From 3cc5aeba146b8071d57e35343ae75235170b6eef Mon Sep 17 00:00:00 2001 From: Jessica Janiuk Date: Thu, 29 Oct 2026 18:50:10 -0700 Subject: [PATCH 1/3] Mirror the bumper button and surface-mount the hall sensor The bumper was hard to press with a single side-firing switch at one end of the top edge. SW_TRIG_DIG2 (Alps SKRTLAE010) mirrors SW_TRIG_DIG1 at the other end and is wired in parallel on GPIO18, so either side does the same. The DRV5055 hall sensor moves from an off-board, hand-wired TO-92 to a DRV5055A2QDBZR SOT-23 (LCSC C266131) on the bottom of the board under the trigger magnet, and is now machine-assembled. The library part only has TO-92, so the SOT-23 (with its different pin order) is a local part. The SOT-23 senses the field through the board, so the magnet's polarity relative to the sensor can be reversed. Trigger calibration used to treat a pulled reading below the released one as uncalibrated and read 0; it now accepts either direction, with regression tests. Also removes the legacy pre-Stackup snips_controller.yaml and repoints the two references to it at PCB/stackup/board.kdl. Co-Authored-By: Claude Opus 5.5 --- PCB/GPIO_table.md | 6 +- PCB/README.md | 4 +- PCB/snips_controller.kicad_dru | 2 +- PCB/snips_controller.kicad_pcb | 7953 +++++++++++--------- PCB/snips_controller.yaml | 1340 ---- PCB/stackup/board.kdl | 16 +- PCB/stackup/parts.kdl | 35 + PCB/stackup/purchasing.kdl | 4 +- include/calibration.h | 3 + include/low_battery.h | 4 +- src/calibration.cpp | 4 +- test/test_calibration/test_calibration.cpp | 35 + 12 files changed, 4441 insertions(+), 4965 deletions(-) delete mode 100644 PCB/snips_controller.yaml diff --git a/PCB/GPIO_table.md b/PCB/GPIO_table.md index d922aa4..f86cb9b 100644 --- a/PCB/GPIO_table.md +++ b/PCB/GPIO_table.md @@ -10,9 +10,9 @@ > USB-C for firmware flashing, charging, and future accessory expansion > (the module's native USB is genuinely exposed, unlike a Pico-family > module whose USB is hardwired to its own onboard connector). -> Pins referenced by number in the yaml, not name — the module's pins are +> Pins referenced by GPIO number, not name — the module's pins are > heavily multi-function (e.g. pin 4 is "GPIO4/TOUCH4/ADC1_CH3") and -> numbers are unambiguous. See `MCU_Core` section of `snips_controller.yaml`. +> numbers are unambiguous. The wiring source is `PCB/stackup/board.kdl`. ## Reserved / Do Not Use | Pin | Reason | @@ -104,7 +104,7 @@ QMA6100P accelerometer at 0x12 instead. See Accelerometer section below. | Vol down | 32 (GPIO39) | Internal pull-up, active low | | Trigger up (mirrored VOL pair, opposite-handed variant) | 9 (GPIO16) | Internal pull-up, active low | | Trigger down (mirrored VOL pair, opposite-handed variant) | 10 (GPIO17) | Internal pull-up, active low | -| Digital trigger (bumper) | 11 (GPIO18) | Internal pull-up, active low | +| Digital trigger (bumper) | 11 (GPIO18) | Internal pull-up, active low. SW_TRIG_DIG1 and SW_TRIG_DIG2 in parallel, one at each end of the top edge | | Thumbstick click (KEY) | 23 (GPIO21) | Internal pull-up, active low | | Macro button 1-6 | 24, 25, 28, 29, 30, 31 (GPIO47, 48, 35, 36, 37, 38) | Internal pull-up, active low — direct-wired, no scan matrix | | Power button sense | 38 (GPIO2) | Input, monitors for 3-second hold | diff --git a/PCB/README.md b/PCB/README.md index 8b054d8..b7b3461 100644 --- a/PCB/README.md +++ b/PCB/README.md @@ -14,7 +14,7 @@ through `snips_controller.stackup_sch`; sync it with the Stackup KiCad plugin. R | MCU | ESP32-S3-WROOM-1 module | Pre-certified: integrated flash, crystal, WiFi/BT radio + antenna. Same MCU family as Amidala. See `GPIO_table.md` for the full support circuitry | — | | Display | SSD1306 1.3" OLED | 128x64, monochrome, I2C | — | | Radio | XBee3 Pro (XB3-24Z8UT) | Zigbee 3.0 firmware, U.FL, +19 dBm, SPI mode, THT socket (proto) | — | -| Hall trigger | DRV5055A2 | Ratiometric linear hall effect, 3.3V | — | +| Hall trigger | DRV5055A2QDBZR (SOT-23) | Ratiometric linear hall effect, 3.3V. On the bottom of the board under the trigger magnet; senses the field perpendicular to the board. Trigger calibration accepts either magnet polarity | — | | Thumbstick | GuliKit hall effect module | Native 3.3V, analog X/Y + click | — | | Buttons | Omron B3F series | Tactile momentary clicky | — | | RGB LED | SK6812 NeoPixel-compatible | RMT-driven status indicator; specified supply begins at 3.7 V, but board supplies 3.3 V | — | @@ -93,7 +93,7 @@ consuming GPIO, unlike the bare-RP2350A design this replaced. | Vol down | 32 | Active low, internal pull-up | | Trigger up (mirrored VOL pair, opposite-handed variant) | 9 | Active low, internal pull-up | | Trigger down (mirrored VOL pair, opposite-handed variant) | 10 | Active low, internal pull-up | -| Digital trigger (bumper) | 11 | Active low, internal pull-up | +| Digital trigger (bumper) | 11 | Active low, internal pull-up. Two switches in parallel (SW_TRIG_DIG1/2), one at each end of the top edge, so the bumper presses from either side | | Thumbstick click (KEY) | 23 | Active low, internal pull-up | | Macro buttons 1-6 | 24, 25, 28, 29, 30, 31 | Active low, internal pull-up — direct-wired, no scan matrix | | Power button sense | 38 | Input, 3-second hold detect | diff --git a/PCB/snips_controller.kicad_dru b/PCB/snips_controller.kicad_dru index 65049b9..f491e68 100644 --- a/PCB/snips_controller.kicad_dru +++ b/PCB/snips_controller.kicad_dru @@ -2,7 +2,7 @@ (rule "Alps SKRTLAE010 locating-peg clearance" (constraint hole_clearance (min 0.08mm)) - (condition "(A.Reference == 'SW_PWR1' || A.Reference == 'SW_VOL_UP1' || A.Reference == 'SW_VOL_DN1' || A.Reference == 'SW_THR_UP1' || A.Reference == 'SW_THR_DN1' || A.Reference == 'SW_TRIG_DIG1') && A.Reference == B.Reference") + (condition "(A.Reference == 'SW_PWR1' || A.Reference == 'SW_VOL_UP1' || A.Reference == 'SW_VOL_DN1' || A.Reference == 'SW_THR_UP1' || A.Reference == 'SW_THR_DN1' || A.Reference == 'SW_TRIG_DIG1' || A.Reference == 'SW_TRIG_DIG2') && A.Reference == B.Reference") ) (rule "XBee3 THT courtyard exception" diff --git a/PCB/snips_controller.kicad_pcb b/PCB/snips_controller.kicad_pcb index 9eb318b..8d0e84d 100644 --- a/PCB/snips_controller.kicad_pcb +++ b/PCB/snips_controller.kicad_pcb @@ -377,7 +377,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:105" + (property "Stackup Source" "PCB/stackup/board.kdl:107" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -988,7 +988,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:88" + (property "Stackup Source" "PCB/stackup/board.kdl:87" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -1406,6 +1406,449 @@ ) ) ) + (footprint "Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" + (layer "F.Cu") + (uuid "0cda4f25-6e45-4521-9c46-12206e63f1b7") + (at 151.35 61.75 180) + (descr "Side push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf)") + (tags "push horizontal SPST 1P1T") + (property "Reference" "SW_TRIG_DIG2" + (at 0 -2.7 0) + (layer "F.SilkS") + (hide yes) + (uuid "555ce17b-9eba-47fb-aa3e-0389b74954fc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "SKRTLAE010" + (at 0 2.9 0) + (layer "F.Fab") + (uuid "09fcd7ea-5762-4f42-b19e-c19c87dc6b94") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "74a67956-655b-48d4-9854-8078ee986e39") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Push button switch, generic, two pins" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "8e28b82e-27f9-4d83-a04b-e4500c9a09be") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "MF" "Alps Alpine" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "abeaa611-cea5-4465-be65-fc84e389bcac") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Manufacturer_Part_Number" "SKRTLAE010" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "45fa9fac-1060-460c-903e-cca532c35c05") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "LCSC" "C110293" + (at 0 0 180) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "1ab3e2ac-6db2-4809-ac76-d7259920a001") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Stackup Path" "SW_TRIG_DIG2" + (at 0 -2 0) + (layer "F.SilkS") + (hide yes) + (uuid "1ead094d-d378-4cb1-ba37-8179f7bc6a48") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Stackup Source" "PCB/stackup/board.kdl:98" + (at 0 -2 0) + (layer "F.SilkS") + (hide yes) + (uuid "201a0c6f-bddb-4197-879d-4ecc2c70091e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/06fe9e0e-a799-58e4-81ac-ab725c212e26") + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start 2.4 -1.5) + (end 2.4 -0.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "65824694-7a43-4402-a70d-256cbe208355") + ) + (fp_line + (start 1.8 -1.5) + (end 2.4 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "f6a5a33f-1536-474a-85bd-6bc70c1c3fa9") + ) + (fp_line + (start -1 1.3) + (end 1 1.3) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4b6e1926-2793-43e1-bb1e-ad56f5202756") + ) + (fp_line + (start -1.8 -1.5) + (end -2.4 -1.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "2df9022c-d820-4b3d-88f8-fec9a809b1c1") + ) + (fp_line + (start -2.4 -1.5) + (end -2.4 -0.5) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "786212a4-bff8-4684-a220-0dd1e7d6ee33") + ) + (fp_line + (start 1 1.5) + (end 1 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "9040694d-5a5b-4c8f-8cab-348ca8a4ac75") + ) + (fp_line + (start 1 0.3) + (end -1 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "1cd8a081-2ab9-4c9c-b141-a45157e5db57") + ) + (fp_line + (start 0.5 1.5) + (end 1 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "142e4839-7321-491f-b164-24477f387f26") + ) + (fp_line + (start 0 1.5) + (end 0.5 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "5f7020ff-c2ed-48e9-90e8-b2c815cb3294") + ) + (fp_line + (start -0.5 1.5) + (end 0 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "82853c34-899e-4acd-9da3-c55c60f74a25") + ) + (fp_line + (start -1 1.5) + (end 1 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "e23c4e37-1b60-4a54-8979-0c939cb5a535") + ) + (fp_line + (start -1 1.5) + (end -0.5 0.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "e170a1ea-fd15-422b-ab60-7d13787918f6") + ) + (fp_line + (start -1 0.3) + (end -1 1.5) + (stroke + (width 0.1) + (type solid) + ) + (layer "Dwgs.User") + (uuid "552b1c0c-c1e1-4719-8e60-b0613aa34bae") + ) + (fp_line + (start 2.83 -2.05) + (end 2.83 2.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "70e9ec84-3d52-4fe2-90d9-f65135baef63") + ) + (fp_line + (start -2.83 2.3) + (end 2.83 2.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "0f834879-5c4b-49b1-aef2-3c1f027f644c") + ) + (fp_line + (start -2.83 -2.05) + (end 2.83 -2.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "560a6a23-bf1a-4b3c-b503-2d52a8c10211") + ) + (fp_line + (start -2.83 -2.05) + (end -2.83 2.3) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "6100fd16-d88a-4145-b0b3-12bd758955bf") + ) + (fp_line + (start 2.25 -1.35) + (end 2.25 1.21) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f363b729-c405-43ef-b879-deb1993b02ad") + ) + (fp_line + (start 1 2.04) + (end 1 1.21) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4c555c34-04fc-44d3-85a9-af622be06fa6") + ) + (fp_line + (start -1 2.04) + (end 1 2.04) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "5b522cd6-a2d6-4778-8588-e47cffaba397") + ) + (fp_line + (start -1 2.04) + (end -1 1.21) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "35b86c26-c075-4a61-a2fa-26b9787217c5") + ) + (fp_line + (start -2.25 1.21) + (end 2.25 1.21) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9504ea5a-453c-4e2c-99a4-886a4e11bf5e") + ) + (fp_line + (start -2.25 -1.35) + (end 2.25 -1.35) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "4575a392-2fac-4288-a54a-a6e106ba4b05") + ) + (fp_line + (start -2.25 -1.35) + (end -2.25 1.21) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "9748557e-ac60-4c69-b9d4-2d246c6783b0") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "b0fd1401-6ea1-42b7-9506-19de29bebf97") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole circle + (at -2.125 0 180) + (size 0.9 0.9) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (uuid "c1a10401-618e-4736-a768-a4c6a0c04e2c") + ) + (pad "" np_thru_hole circle + (at 2.125 0 180) + (size 0.9 0.9) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (uuid "139990a9-f2f4-4208-883f-d8c4a03cda61") + ) + (pad "1" smd roundrect + (at -1.225 -0.9 180) + (size 0.75 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/Buttons_Direct/BTN_TRIG_DIG") + (pinfunction "1_1") + (pintype "passive") + (uuid "4bcee029-c75d-45ff-9b85-b6bac06ed5ee") + ) + (pad "1" smd roundrect + (at 1.225 -0.9 180) + (size 0.75 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "/Buttons_Direct/BTN_TRIG_DIG") + (pinfunction "1_1") + (pintype "passive") + (uuid "a2dff8c1-f6fd-438c-a289-8bf57c043223") + ) + (pad "2" smd roundrect + (at 0 -0.9 180) + (size 0.6 1.8) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (net "GND") + (pinfunction "2_2") + (pintype "passive") + (uuid "9a3b1931-3381-4883-834e-9e7034cc3f26") + ) + (pad "MP" smd roundrect + (at -1.85 1.05 180) + (size 1.3 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "83c87fe6-9fdc-47d2-8e78-ffe28fe620ff") + ) + (pad "MP" smd roundrect + (at 1.85 1.05 180) + (size 1.3 0.9) + (layers "F.Cu" "F.Mask" "F.Paste") + (roundrect_rratio 0.25) + (uuid "a1976033-8414-463f-b1cc-173a9d5a1fe8") + ) + (embedded_fonts no) + (model "${KIPRJMOD}/libraries/3dmodels/SW_Alps_SKRTLAE010.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm" (layer "F.Cu") (uuid "0d62f5e8-889b-44cc-b976-571a995feb77") @@ -1512,7 +1955,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:91" + (property "Stackup Source" "PCB/stackup/board.kdl:90" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -2032,7 +2475,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:85" + (property "Stackup Source" "PCB/stackup/board.kdl:84" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -2240,7 +2683,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:43" + (property "Stackup Source" "PCB/stackup/board.kdl:42" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -2584,7 +3027,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:92" + (property "Stackup Source" "PCB/stackup/board.kdl:91" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -3104,7 +3547,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:37" + (property "Stackup Source" "PCB/stackup/board.kdl:36" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -3316,7 +3759,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:89" + (property "Stackup Source" "PCB/stackup/board.kdl:88" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -3836,7 +4279,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:44" + (property "Stackup Source" "PCB/stackup/board.kdl:43" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -4044,7 +4487,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:84" + (property "Stackup Source" "PCB/stackup/board.kdl:83" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -4252,7 +4695,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:78" + (property "Stackup Source" "PCB/stackup/board.kdl:77" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -4361,7 +4804,7 @@ (footprint "MountingHole:MountingHole_2.7mm_M2.5" (layer "F.Cu") (uuid "5b8d286f-7f4d-4a05-adb2-911c9bcbda18") - (at 123.4 81.4) + (at 123.3 69.2) (descr "Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py") (tags "mountinghole M2.5") (property "Reference" "MH1" @@ -4468,7 +4911,7 @@ (footprint "Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" (layer "F.Cu") (uuid "5ea56383-fbe8-4b43-b5fb-5bb7711fef2c") - (at 124.725 61.75 180) + (at 123.65 61.75 180) (descr "Side push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf)") (tags "push horizontal SPST 1P1T") (property "Reference" "SW_TRIG_DIG1" @@ -4571,7 +5014,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:96" + (property "Stackup Source" "PCB/stackup/board.kdl:95" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -4917,7 +5360,7 @@ (footprint "MountingHole:MountingHole_2.7mm_M2.5" (layer "F.Cu") (uuid "642739ea-f87e-4c08-b1a2-ec3b807c0ad8") - (at 151.6 70) + (at 151.7 69.2) (descr "Mounting Hole 2.7mm, M2.5, no annular, generated by kicad-footprint-generator mountinghole.py") (tags "mountinghole M2.5") (property "Reference" "MH2" @@ -5024,11 +5467,11 @@ (footprint "Resistor_SMD:R_0402_1005Metric" (layer "F.Cu") (uuid "6a13aaf5-4a7d-4c60-bd31-7583fc85b752") - (at 127.2 78.56 -90) + (at 126.89 67.4 180) (descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "resistor") (property "Reference" "R_EN_PU1" - (at 0 -1.17 90) + (at 0 -1.17 0) (layer "F.SilkS") (hide yes) (uuid "ceb89eb3-6dae-4927-b75a-1318b42b1b17") @@ -5040,7 +5483,7 @@ ) ) (property "Value" "10kΩ" - (at 0 1.17 90) + (at 0 1.17 0) (layer "F.Fab") (uuid "af0ab304-1d9a-4028-a879-5ada59a3565d") (effects @@ -5051,7 +5494,7 @@ ) ) (property "Datasheet" "" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "270c7031-230b-4fd7-89a1-60f1f7fba49c") @@ -5062,7 +5505,7 @@ ) ) (property "Description" "Resistor" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "bebc447a-d13a-49e4-a0db-af7b43b08cbe") @@ -5073,7 +5516,7 @@ ) ) (property "MF" "UNI-ROYAL(Uniroyal Elec)" - (at 0 0 270) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -5086,7 +5529,7 @@ ) ) (property "Manufacturer_Part_Number" "0402WGF1002TCE" - (at 0 0 270) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -5099,7 +5542,7 @@ ) ) (property "LCSC" "C25744" - (at 0 0 270) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -5112,7 +5555,7 @@ ) ) (property "Stackup Path" "R_EN_PU1" - (at 2 0 0) + (at 2 0 90) (layer "F.SilkS") (hide yes) (uuid "3a1e9555-957d-443c-b9c5-791e5161f48a") @@ -5123,8 +5566,8 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:65" - (at 2 0 0) + (property "Stackup Source" "PCB/stackup/board.kdl:64" + (at 2 0 90) (layer "F.SilkS") (hide yes) (uuid "986970b5-8d0c-4052-8c69-707b4ea6dda8") @@ -5188,7 +5631,7 @@ (uuid "fbf09998-c526-4d2e-8c2f-d694110d4f4b") ) (fp_text user "${REFERENCE}" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (uuid "d4e2972d-c800-485f-8e55-ffbc05ad9980") (effects @@ -5199,7 +5642,7 @@ ) ) (pad "1" smd roundrect - (at -0.51 0 270) + (at -0.51 0 180) (size 0.54 0.64) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -5208,7 +5651,7 @@ (uuid "4757f2fa-9493-4c05-95b2-c1c7e278bcb6") ) (pad "2" smd roundrect - (at 0.51 0 270) + (at 0.51 0 180) (size 0.54 0.64) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -5331,7 +5774,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:103" + (property "Stackup Source" "PCB/stackup/board.kdl:105" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -6177,7 +6620,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:95" + (property "Stackup Source" "PCB/stackup/board.kdl:94" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -6618,7 +7061,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:51" + (property "Stackup Source" "PCB/stackup/board.kdl:50" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -6745,7 +7188,7 @@ (footprint "Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal" (layer "F.Cu") (uuid "87312f15-4904-4812-a8ac-fdb6935b1b62") - (at 124 71) + (at 124.1 80.8 180) (descr "JST SH series connector, SM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf)") (tags "connector JST SH horizontal") (property "Reference" "U_OLED1" @@ -6794,7 +7237,7 @@ ) ) (property "MF" "JST" - (at 0 0 0) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -6807,7 +7250,7 @@ ) ) (property "Manufacturer_Part_Number" "SM04B-SRSS-TB(LF)(SN)" - (at 0 0 0) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -6820,7 +7263,7 @@ ) ) (property "LCSC" "C160404" - (at 0 0 0) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -6844,7 +7287,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:104" + (property "Stackup Source" "PCB/stackup/board.kdl:106" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -6866,284 +7309,284 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -3.11 -1.785) - (end -2.06 -1.785) + (start 3.11 0.715) + (end 3.11 -1.785) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "8a8c14b7-7341-4bba-90c7-bf6ca2706aaa") + (uuid "d15f7328-6f05-4c82-ab77-36b64a0a2443") ) (fp_line - (start -3.11 0.715) - (end -3.11 -1.785) + (start 3.11 -1.785) + (end 2.06 -1.785) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "e43be91c-48c8-4187-9b8f-55d03efe785e") + (uuid "31f465be-ae3d-4680-b7fe-502138f2c088") ) (fp_line - (start -2.06 -1.785) - (end -2.06 -2.775) + (start -1.94 2.685) + (end 1.94 2.685) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "5c49bbc3-38c7-4683-a283-2a5a2587fed5") + (uuid "c82ddfe4-0b94-4315-86ad-704649186bcb") ) (fp_line - (start -1.94 2.685) - (end 1.94 2.685) + (start -2.06 -1.785) + (end -2.06 -2.775) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "c82ddfe4-0b94-4315-86ad-704649186bcb") + (uuid "5c49bbc3-38c7-4683-a283-2a5a2587fed5") ) (fp_line - (start 3.11 -1.785) - (end 2.06 -1.785) + (start -3.11 0.715) + (end -3.11 -1.785) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "31f465be-ae3d-4680-b7fe-502138f2c088") + (uuid "e43be91c-48c8-4187-9b8f-55d03efe785e") ) (fp_line - (start 3.11 0.715) - (end 3.11 -1.785) + (start -3.11 -1.785) + (end -2.06 -1.785) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "d15f7328-6f05-4c82-ab77-36b64a0a2443") + (uuid "8a8c14b7-7341-4bba-90c7-bf6ca2706aaa") ) (fp_line - (start -3.9 0.47) - (end -3.5 0.47) + (start 3.9 3.28) + (end 1.69 3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "58f1a9b0-4ec8-4f0b-958e-6c101230197d") + (uuid "e785d391-0e0e-45eb-8ec9-1890c07f2191") ) (fp_line - (start -3.9 3.28) - (end -3.9 0.47) + (start 3.9 0.47) + (end 3.9 3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "e3015e82-05cc-427b-b1cd-e1b0d70caea9") + (uuid "8b797c5c-f28f-49eb-8c32-5db6a1a39286") ) (fp_line - (start -3.5 -2.18) - (end -2.3 -2.18) + (start 3.5 0.47) + (end 3.9 0.47) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "16888ce5-e134-468c-87e4-95a4a57abaf0") + (uuid "73c66dbb-42a3-4ad1-9dd0-5da8ad8f31a6") ) (fp_line - (start -3.5 0.47) - (end -3.5 -2.18) + (start 3.5 -2.18) + (end 3.5 0.47) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "bd85030a-3888-44e2-ad84-793f1fca3561") + (uuid "e9abab59-7e2c-4116-9914-f1b7f90e43aa") ) (fp_line - (start -2.3 -3.28) - (end 2.3 -3.28) + (start 2.3 -2.18) + (end 3.5 -2.18) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "ba52edd6-7aad-4d6e-be8c-fa6b8a5fca75") + (uuid "816acf32-590a-4715-afc4-085629c0fcfd") ) (fp_line - (start -2.3 -2.18) - (end -2.3 -3.28) + (start 2.3 -3.28) + (end 2.3 -2.18) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "d724f36e-4a2c-48e4-9b88-63a9b9c7d086") + (uuid "3a80e4a2-3f91-4dba-9650-1bc33f7fed3c") ) (fp_line - (start -1.69 3.08) - (end -1.69 3.28) + (start 1.69 3.28) + (end 1.69 3.08) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "ccea39c6-92fa-4285-a1d6-4d8f72e114ec") + (uuid "b8505b31-9026-43d5-858f-63abc71dc7aa") ) (fp_line - (start -1.69 3.28) - (end -3.9 3.28) + (start 1.69 3.08) + (end -1.69 3.08) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "0f9fa9f5-32bf-4ab4-ad5c-b72734113b61") + (uuid "e757cfb5-3aaa-46d0-999f-970aad907cb7") ) (fp_line - (start 1.69 3.08) - (end -1.69 3.08) + (start -1.69 3.28) + (end -3.9 3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "e757cfb5-3aaa-46d0-999f-970aad907cb7") + (uuid "0f9fa9f5-32bf-4ab4-ad5c-b72734113b61") ) (fp_line - (start 1.69 3.28) - (end 1.69 3.08) + (start -1.69 3.08) + (end -1.69 3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "b8505b31-9026-43d5-858f-63abc71dc7aa") + (uuid "ccea39c6-92fa-4285-a1d6-4d8f72e114ec") ) (fp_line - (start 2.3 -3.28) - (end 2.3 -2.18) + (start -2.3 -2.18) + (end -2.3 -3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "3a80e4a2-3f91-4dba-9650-1bc33f7fed3c") + (uuid "d724f36e-4a2c-48e4-9b88-63a9b9c7d086") ) (fp_line - (start 2.3 -2.18) - (end 3.5 -2.18) + (start -2.3 -3.28) + (end 2.3 -3.28) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "816acf32-590a-4715-afc4-085629c0fcfd") + (uuid "ba52edd6-7aad-4d6e-be8c-fa6b8a5fca75") ) (fp_line - (start 3.5 -2.18) - (end 3.5 0.47) + (start -3.5 0.47) + (end -3.5 -2.18) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "e9abab59-7e2c-4116-9914-f1b7f90e43aa") + (uuid "bd85030a-3888-44e2-ad84-793f1fca3561") ) (fp_line - (start 3.5 0.47) - (end 3.9 0.47) + (start -3.5 -2.18) + (end -2.3 -2.18) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "73c66dbb-42a3-4ad1-9dd0-5da8ad8f31a6") + (uuid "16888ce5-e134-468c-87e4-95a4a57abaf0") ) (fp_line - (start 3.9 0.47) - (end 3.9 3.28) + (start -3.9 3.28) + (end -3.9 0.47) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "8b797c5c-f28f-49eb-8c32-5db6a1a39286") + (uuid "e3015e82-05cc-427b-b1cd-e1b0d70caea9") ) (fp_line - (start 3.9 3.28) - (end 1.69 3.28) + (start -3.9 0.47) + (end -3.5 0.47) (stroke (width 0.05) (type solid) ) (layer "F.CrtYd") - (uuid "e785d391-0e0e-45eb-8ec9-1890c07f2191") + (uuid "58f1a9b0-4ec8-4f0b-958e-6c101230197d") ) (fp_line - (start -3 -1.675) - (end -3 2.575) + (start 3 -1.675) + (end 3 2.575) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "ebf9050d-8606-4a1b-be50-e70ab17a2501") + (uuid "9eb95cac-0a57-4f38-8e94-46195b4a153a") ) (fp_line - (start -3 -1.675) - (end 3 -1.675) + (start -1.5 -0.967893) + (end -1 -1.675) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "9df93fb5-f6d3-47bd-b871-b6a8b0fbd792") + (uuid "86cc30d7-fc2d-4c1f-94b9-23b62976ced3") ) (fp_line - (start -3 2.575) - (end 3 2.575) + (start -2 -1.675) + (end -1.5 -0.967893) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "7bcc57ad-cc5b-4eec-94e2-d2bceae5dfa2") + (uuid "fd55e7fc-5a3a-4702-a99b-e20519755339") ) (fp_line - (start -2 -1.675) - (end -1.5 -0.967893) + (start -3 2.575) + (end 3 2.575) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "fd55e7fc-5a3a-4702-a99b-e20519755339") + (uuid "7bcc57ad-cc5b-4eec-94e2-d2bceae5dfa2") ) (fp_line - (start -1.5 -0.967893) - (end -1 -1.675) + (start -3 -1.675) + (end 3 -1.675) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "86cc30d7-fc2d-4c1f-94b9-23b62976ced3") + (uuid "9df93fb5-f6d3-47bd-b871-b6a8b0fbd792") ) (fp_line - (start 3 -1.675) - (end 3 2.575) + (start -3 -1.675) + (end -3 2.575) (stroke (width 0.1) (type solid) ) (layer "F.Fab") - (uuid "9eb95cac-0a57-4f38-8e94-46195b4a153a") + (uuid "ebf9050d-8606-4a1b-be50-e70ab17a2501") ) (fp_text user "${REFERENCE}" (at 0 0 0) @@ -7157,7 +7600,7 @@ ) ) (pad "1" smd roundrect - (at -1.5 -2) + (at -1.5 -2 180) (size 0.6 1.55) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7167,7 +7610,7 @@ (uuid "f8f99ad6-3f07-4db2-aef5-022bad5f7352") ) (pad "2" smd roundrect - (at -0.5 -2) + (at -0.5 -2 180) (size 0.6 1.55) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7177,7 +7620,7 @@ (uuid "d4470de2-29e2-4454-9424-f1c4180fd11d") ) (pad "3" smd roundrect - (at 0.5 -2) + (at 0.5 -2 180) (size 0.6 1.55) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7187,7 +7630,7 @@ (uuid "d1799902-4d1b-434c-a867-be3d16e32b0a") ) (pad "4" smd roundrect - (at 1.5 -2) + (at 1.5 -2 180) (size 0.6 1.55) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7197,14 +7640,14 @@ (uuid "6b5fd061-7a08-4dfb-ace6-55e380ad772d") ) (pad "MP" smd roundrect - (at -2.8 1.875) + (at -2.8 1.875 180) (size 1.2 1.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.208333) (uuid "ede36db9-c1b2-43a1-a3c9-9d336f3f2241") ) (pad "MP" smd roundrect - (at 2.8 1.875) + (at 2.8 1.875 180) (size 1.2 1.8) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.208333) @@ -7325,7 +7768,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:64" + (property "Stackup Source" "PCB/stackup/board.kdl:63" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -7533,7 +7976,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:47" + (property "Stackup Source" "PCB/stackup/board.kdl:46" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -7642,7 +8085,7 @@ (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (uuid "95523c4d-0933-4f70-a61c-4aaab9a448d6") - (at 123 67 180) + (at 125.28 84.625) (descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C_OLED_2" @@ -7691,7 +8134,7 @@ ) ) (property "MF" "Samsung Electro-Mechanics" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -7704,7 +8147,7 @@ ) ) (property "Manufacturer_Part_Number" "CL05B104KO5NNNC" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -7717,7 +8160,7 @@ ) ) (property "LCSC" "C1525" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -7741,7 +8184,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:36" + (property "Stackup Source" "PCB/stackup/board.kdl:35" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -7764,24 +8207,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.107836 0.36) - (end 0.107836 0.36) + (start -0.107836 -0.36) + (end 0.107836 -0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "46b4b9e7-e1ce-4f37-b916-22d5c7bcba2a") + (uuid "ef956fa7-54e3-432e-9c5b-fff3ecba9c23") ) (fp_line - (start -0.107836 -0.36) - (end 0.107836 -0.36) + (start -0.107836 0.36) + (end 0.107836 0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "ef956fa7-54e3-432e-9c5b-fff3ecba9c23") + (uuid "46b4b9e7-e1ce-4f37-b916-22d5c7bcba2a") ) (fp_rect (start -0.91 -0.46) @@ -7817,7 +8260,7 @@ ) ) (pad "1" smd roundrect - (at -0.48 0 180) + (at -0.48 0) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7826,7 +8269,7 @@ (uuid "c48f2692-bc53-4d5f-ae73-d1fad227714a") ) (pad "2" smd roundrect - (at 0.48 0 180) + (at 0.48 0) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -7953,7 +8396,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:86" + (property "Stackup Source" "PCB/stackup/board.kdl:85" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -8366,7 +8809,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:97" + (property "Stackup Source" "PCB/stackup/board.kdl:99" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -8815,7 +9258,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:90" + (property "Stackup Source" "PCB/stackup/board.kdl:89" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -9339,7 +9782,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:56" + (property "Stackup Source" "PCB/stackup/board.kdl:55" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -9839,7 +10282,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:45" + (property "Stackup Source" "PCB/stackup/board.kdl:44" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -10014,7 +10457,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:55" + (property "Stackup Source" "PCB/stackup/board.kdl:54" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -10360,7 +10803,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:29" + (property "Stackup Source" "PCB/stackup/board.kdl:28" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -10568,7 +11011,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:74" + (property "Stackup Source" "PCB/stackup/board.kdl:73" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -10684,7 +11127,7 @@ (at 0 -3.65 0) (layer "F.SilkS") (hide yes) - (uuid "3575bbee-8615-4baa-8d4d-b0b794cf2a42") + (uuid "286752dd-9bc3-48b6-8322-46614442c227") (effects (font (size 1 1) @@ -10695,7 +11138,7 @@ (property "Value" "MountingHole_2.7mm_M2.5" (at 0 3.65 0) (layer "F.Fab") - (uuid "710fd76c-cde1-4828-abde-1f0fe4fef30b") + (uuid "dd46c990-50fd-4bcc-8a9d-2afb50bbd458") (effects (font (size 1 1) @@ -10707,7 +11150,7 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "64556875-a160-476b-aa3e-9ba039380d34") + (uuid "659c7296-dd98-4e55-a0cb-114c41aa7541") (effects (font (size 1.27 1.27) @@ -10718,7 +11161,7 @@ (at 0 0 0) (layer "F.Fab") (hide yes) - (uuid "8896886a-5e28-4c89-aa7f-64d8a6d7be54") + (uuid "ce5251cd-007d-476f-8480-5a0f973a3d68") (effects (font (size 1.27 1.27) @@ -10883,7 +11326,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:63" + (property "Stackup Source" "PCB/stackup/board.kdl:62" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -10992,7 +11435,7 @@ (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (uuid "ca4cc822-1396-4067-bc37-2989a1e547e5") - (at 127.5 65.07 -90) + (at 127.5 64.88 90) (descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C_3V3_2" @@ -11041,7 +11484,7 @@ ) ) (property "MF" "Samsung Electro-Mechanics" - (at 0 0 270) + (at 0 0 90) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11054,7 +11497,7 @@ ) ) (property "Manufacturer_Part_Number" "CL05B104KO5NNNC" - (at 0 0 270) + (at 0 0 90) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11067,7 +11510,7 @@ ) ) (property "LCSC" "C1525" - (at 0 0 270) + (at 0 0 90) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11091,7 +11534,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:24" + (property "Stackup Source" "PCB/stackup/board.kdl:23" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -11114,24 +11557,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.107836 0.36) - (end 0.107836 0.36) + (start -0.107836 -0.36) + (end 0.107836 -0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "a5ad6d04-fbf4-4e6e-80dd-796da04a7f27") + (uuid "442cbd50-4ae2-4705-bed2-d0fdbb666ed0") ) (fp_line - (start -0.107836 -0.36) - (end 0.107836 -0.36) + (start -0.107836 0.36) + (end 0.107836 0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "442cbd50-4ae2-4705-bed2-d0fdbb666ed0") + (uuid "a5ad6d04-fbf4-4e6e-80dd-796da04a7f27") ) (fp_rect (start -0.91 -0.46) @@ -11167,7 +11610,7 @@ ) ) (pad "1" smd roundrect - (at -0.48 0 270) + (at -0.48 0 90) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -11176,7 +11619,7 @@ (uuid "86978152-f2d0-4efd-b75d-f23d9f97e1bc") ) (pad "2" smd roundrect - (at 0.48 0 270) + (at 0.48 0 90) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -11332,11 +11775,11 @@ (footprint "Capacitor_SMD:C_0603_1608Metric" (layer "F.Cu") (uuid "cad46504-6d0e-4285-af11-4a75d8535790") - (at 126 65.5 90) + (at 125.375 64.7 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C_3V3_1" - (at 0 -1.43 90) + (at 0 -1.43 0) (layer "F.SilkS") (hide yes) (uuid "29f569ca-8997-4790-89a9-5c670cb77ef6") @@ -11348,7 +11791,7 @@ ) ) (property "Value" "10µF" - (at 0 1.43 90) + (at 0 1.43 0) (layer "F.Fab") (uuid "0c37499e-eeea-411d-837b-b1b106396141") (effects @@ -11359,7 +11802,7 @@ ) ) (property "Datasheet" "" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "31e3334d-3e8f-45a8-823b-e18db62e6f35") @@ -11370,7 +11813,7 @@ ) ) (property "Description" "Unpolarized capacitor" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "731eb54d-62ef-4612-8882-99555f6fb3e6") @@ -11381,7 +11824,7 @@ ) ) (property "MF" "Samsung Electro-Mechanics" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11394,7 +11837,7 @@ ) ) (property "Manufacturer_Part_Number" "CL10A106KP8NNNC" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11407,7 +11850,7 @@ ) ) (property "LCSC" "C19702" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -11420,7 +11863,7 @@ ) ) (property "Stackup Path" "C_3V3_1" - (at -2 0 0) + (at -2 0 90) (layer "F.SilkS") (hide yes) (uuid "073aac27-27c6-47bb-a3ba-7fad83cb148b") @@ -11431,8 +11874,8 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:23" - (at -2 0 0) + (property "Stackup Source" "PCB/stackup/board.kdl:22" + (at -2 0 90) (layer "F.SilkS") (hide yes) (uuid "1057e9d5-e6d1-4be5-b02e-25d32c274185") @@ -11454,24 +11897,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.14058 -0.51) - (end 0.14058 -0.51) + (start -0.14058 0.51) + (end 0.14058 0.51) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "7fe2c87e-beed-4403-a001-3c170a7b804a") + (uuid "58efd5af-4061-4746-a119-98c37d69ecca") ) (fp_line - (start -0.14058 0.51) - (end 0.14058 0.51) + (start -0.14058 -0.51) + (end 0.14058 -0.51) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "58efd5af-4061-4746-a119-98c37d69ecca") + (uuid "7fe2c87e-beed-4403-a001-3c170a7b804a") ) (fp_rect (start -1.48 -0.73) @@ -11496,7 +11939,7 @@ (uuid "1df0fc4c-36be-40d6-918a-4cc50e2e48d6") ) (fp_text user "${REFERENCE}" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (uuid "d9f791a3-4207-4fa7-b561-99cb0982dec3") (effects @@ -11507,7 +11950,7 @@ ) ) (pad "1" smd roundrect - (at -0.775 0 90) + (at -0.775 0 180) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -11516,7 +11959,7 @@ (uuid "ddb259fd-1ab8-4fd4-b8bf-a9bb6dcfac21") ) (pad "2" smd roundrect - (at 0.775 0 90) + (at 0.775 0 180) (size 0.9 0.95) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -11541,7 +11984,7 @@ (placed yes) (layer "F.Cu") (uuid "cfa4e7e5-e902-43d0-b905-c5edd76d51e2") - (at 125.09 87) + (at 125.99 89.1) (descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "resistor") (property "Reference" "R_VSYS1" @@ -11640,7 +12083,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:81" + (property "Stackup Source" "PCB/stackup/board.kdl:80" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -11848,7 +12291,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:79" + (property "Stackup Source" "PCB/stackup/board.kdl:78" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -12060,7 +12503,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:94" + (property "Stackup Source" "PCB/stackup/board.kdl:93" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -12505,7 +12948,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:46" + (property "Stackup Source" "PCB/stackup/board.kdl:45" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -12717,7 +13160,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:98" + (property "Stackup Source" "PCB/stackup/board.kdl:100" (at -2 0 0) (layer "F.SilkS") (hide yes) @@ -13063,7 +13506,7 @@ (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") (uuid "de964729-f714-4368-8213-b345a6b4ae45") - (at 122.5 65.5 180) + (at 124.85 86.3) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)") (tags "capacitor") (property "Reference" "C_OLED_1" @@ -13112,7 +13555,7 @@ ) ) (property "MF" "Samsung Electro-Mechanics" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -13125,7 +13568,7 @@ ) ) (property "Manufacturer_Part_Number" "CL21A106KAYNNNE" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -13138,7 +13581,7 @@ ) ) (property "LCSC" "C15850" - (at 0 0 180) + (at 0 0 0) (unlocked yes) (layer "F.Fab") (hide yes) @@ -13162,7 +13605,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:35" + (property "Stackup Source" "PCB/stackup/board.kdl:34" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -13185,24 +13628,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.261252 0.735) - (end 0.261252 0.735) + (start -0.261252 -0.735) + (end 0.261252 -0.735) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "4c36d5cc-1724-49c0-bb50-040ec890eeee") + (uuid "fe385383-e856-481e-a63b-be17460a2ed0") ) (fp_line - (start -0.261252 -0.735) - (end 0.261252 -0.735) + (start -0.261252 0.735) + (end 0.261252 0.735) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "fe385383-e856-481e-a63b-be17460a2ed0") + (uuid "4c36d5cc-1724-49c0-bb50-040ec890eeee") ) (fp_rect (start -1.7 -0.98) @@ -13238,7 +13681,7 @@ ) ) (pad "1" smd roundrect - (at -0.95 0 180) + (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -13247,7 +13690,7 @@ (uuid "0d58a331-c280-435f-9111-f79be7a16f96") ) (pad "2" smd roundrect - (at 0.95 0 180) + (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -13374,7 +13817,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:87" + (property "Stackup Source" "PCB/stackup/board.kdl:86" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -13796,7 +14239,7 @@ (placed yes) (layer "F.Cu") (uuid "e8959995-a97b-490a-9489-b4f7b64be06d") - (at 125.08 85.8 180) + (at 125.99 87.9 180) (descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "resistor") (property "Reference" "R_VSYS2" @@ -13895,7 +14338,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:82" + (property "Stackup Source" "PCB/stackup/board.kdl:81" (at 0 -2 0) (layer "F.SilkS") (hide yes) @@ -14235,7 +14678,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:38" + (property "Stackup Source" "PCB/stackup/board.kdl:37" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -14455,7 +14898,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:83" + (property "Stackup Source" "PCB/stackup/board.kdl:82" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -14571,7 +15014,7 @@ (at 0 -2.7 180) (layer "F.SilkS") (hide yes) - (uuid "d4d0ee18-aa45-481b-b947-f22bc97a6f4d") + (uuid "63853dc8-253d-4ee3-890d-81a26c7051ec") (effects (font (size 1 1) @@ -14582,7 +15025,7 @@ (property "Value" "SKRTLAE010" (at 0 2.9 0) (layer "F.Fab") - (uuid "d3a62366-8d49-4eb2-889a-27d3572c1ca1") + (uuid "2f4f4acc-c522-4a0b-be7d-7c1114273030") (effects (font (size 1 1) @@ -14595,7 +15038,7 @@ (unlocked yes) (layer "F.Fab") (hide yes) - (uuid "5887826b-c579-4299-808b-757b0a4e0f69") + (uuid "131f38b0-75f5-4584-afa2-c904bf81fe01") (effects (font (size 1.27 1.27) @@ -14608,7 +15051,7 @@ (unlocked yes) (layer "F.Fab") (hide yes) - (uuid "ac730249-2256-4a5e-9653-3df6554a4f81") + (uuid "30a4970b-0b8b-4396-86e5-841d62fb7933") (effects (font (size 1.27 1.27) @@ -14667,7 +15110,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:93" + (property "Stackup Source" "PCB/stackup/board.kdl:92" (at 0 2 0) (layer "F.SilkS") (hide yes) @@ -15013,11 +15456,11 @@ (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "F.Cu") (uuid "f2da37a2-5ebf-4361-a278-9ad523a1d823") - (at 127.3 67.18 90) + (at 126.92 66.4 180) (descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C_3V3_3" - (at 0 -1.16 90) + (at 0 -1.16 0) (layer "F.SilkS") (hide yes) (uuid "1cf4bbda-f86c-4ce9-b41b-ffe4a566b3a5") @@ -15029,7 +15472,7 @@ ) ) (property "Value" "39pF" - (at 0 1.16 90) + (at 0 1.16 0) (layer "F.Fab") (uuid "2afdb062-6895-4b36-a68f-814c2c9e003a") (effects @@ -15040,7 +15483,7 @@ ) ) (property "Datasheet" "" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "b261846a-d207-4112-8475-9d378eb4583a") @@ -15051,7 +15494,7 @@ ) ) (property "Description" "Unpolarized capacitor" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (hide yes) (uuid "9f7277a8-8033-4346-98d6-cd1338f7a282") @@ -15062,7 +15505,7 @@ ) ) (property "KiLib_Generator" "SMD_2terminal_chip_molded" - (at 0 0 90) + (at 0 0 0) (layer "F.SilkS") (hide yes) (uuid "9456e09d-e590-4cc9-995c-dacd0b763235") @@ -15074,7 +15517,7 @@ ) ) (property "MF" "Yageo" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -15087,7 +15530,7 @@ ) ) (property "Manufacturer_Part_Number" "CC0402JRNPO9BN390" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -15100,7 +15543,7 @@ ) ) (property "LCSC" "C106223" - (at 0 0 90) + (at 0 0 180) (unlocked yes) (layer "F.Fab") (hide yes) @@ -15113,7 +15556,7 @@ ) ) (property "Stackup Path" "C_3V3_3" - (at -2 0 0) + (at -2 0 90) (layer "F.SilkS") (hide yes) (uuid "f167294e-517d-43b1-b416-ad8e585e08e9") @@ -15124,8 +15567,8 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:25" - (at -2 0 0) + (property "Stackup Source" "PCB/stackup/board.kdl:24" + (at -2 0 90) (layer "F.SilkS") (hide yes) (uuid "07761bbe-883d-4e26-8240-5f3b0d335d1c") @@ -15147,24 +15590,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.107836 -0.36) - (end 0.107836 -0.36) + (start -0.107836 0.36) + (end 0.107836 0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "ec1f4a64-39df-44b8-ac34-ed8fa8688363") + (uuid "ac9c45b6-f250-4cb1-8a2c-d95ce1491da4") ) (fp_line - (start -0.107836 0.36) - (end 0.107836 0.36) + (start -0.107836 -0.36) + (end 0.107836 -0.36) (stroke (width 0.12) (type solid) ) (layer "F.SilkS") - (uuid "ac9c45b6-f250-4cb1-8a2c-d95ce1491da4") + (uuid "ec1f4a64-39df-44b8-ac34-ed8fa8688363") ) (fp_rect (start -0.91 -0.46) @@ -15189,7 +15632,7 @@ (uuid "22bada5e-210a-42b4-a46c-96cbd987105a") ) (fp_text user "${REFERENCE}" - (at 0 0 90) + (at 0 0 0) (layer "F.Fab") (uuid "d1a264c2-74eb-4422-a410-6bcd15a6b504") (effects @@ -15200,7 +15643,7 @@ ) ) (pad "1" smd roundrect - (at -0.48 0 90) + (at -0.48 0 180) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -15209,7 +15652,7 @@ (uuid "80f4ca79-a4a0-4ee3-929c-eb94f881b284") ) (pad "2" smd roundrect - (at 0.48 0 90) + (at 0.48 0 180) (size 0.56 0.62) (layers "F.Cu" "F.Mask" "F.Paste") (roundrect_rratio 0.25) @@ -15332,7 +15775,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:61" + (property "Stackup Source" "PCB/stackup/board.kdl:60" (at 2 0 0) (layer "F.SilkS") (hide yes) @@ -15547,7 +15990,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:62" + (property "Stackup Source" "PCB/stackup/board.kdl:61" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -15763,7 +16206,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:39" + (property "Stackup Source" "PCB/stackup/board.kdl:38" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -15979,7 +16422,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:60" + (property "Stackup Source" "PCB/stackup/board.kdl:59" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -16422,7 +16865,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:54" + (property "Stackup Source" "PCB/stackup/board.kdl:53" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -16768,7 +17211,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:22" + (property "Stackup Source" "PCB/stackup/board.kdl:21" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -17260,7 +17703,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:42" + (property "Stackup Source" "PCB/stackup/board.kdl:41" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -17476,7 +17919,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:41" + (property "Stackup Source" "PCB/stackup/board.kdl:40" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -17692,7 +18135,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:28" + (property "Stackup Source" "PCB/stackup/board.kdl:27" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -17921,7 +18364,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:48" + (property "Stackup Source" "PCB/stackup/board.kdl:47" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -18372,7 +18815,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:49" + (property "Stackup Source" "PCB/stackup/board.kdl:48" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -19984,7 +20427,7 @@ (justify mirror) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:102" + (property "Stackup Source" "PCB/stackup/board.kdl:104" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -20360,7 +20803,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:27" + (property "Stackup Source" "PCB/stackup/board.kdl:26" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -20589,7 +21032,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:34" + (property "Stackup Source" "PCB/stackup/board.kdl:33" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -20699,11 +21142,11 @@ (footprint "Capacitor_SMD:C_0402_1005Metric" (layer "B.Cu") (uuid "5afd9c51-ad9d-481b-b003-54bbbb6854d6") - (at 151.52 66 180) + (at 139.5 73 90) (descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)") (tags "capacitor") (property "Reference" "C_HALL1" - (at 0 1.16 0) + (at 0 1.16 90) (layer "B.SilkS") (hide yes) (uuid "fcd5da2c-62a3-4024-8450-439defd15ad5") @@ -20716,7 +21159,7 @@ ) ) (property "Value" "100nF" - (at 0 -1.16 0) + (at 0 -1.16 90) (layer "B.Fab") (uuid "3681de8c-af85-421b-a828-5ca8c7b8781d") (effects @@ -20728,7 +21171,7 @@ ) ) (property "Datasheet" "" - (at 0 0 0) + (at 0 0 90) (layer "B.Fab") (hide yes) (uuid "dbb00896-8dd2-4af0-bd77-ae36fbaec392") @@ -20740,7 +21183,7 @@ ) ) (property "Description" "Unpolarized capacitor" - (at 0 0 0) + (at 0 0 90) (layer "B.Fab") (hide yes) (uuid "cc5451d1-49a4-4cb9-9218-94c9c6060b1d") @@ -20752,7 +21195,7 @@ ) ) (property "MF" "Samsung Electro-Mechanics" - (at 0 0 0) + (at 0 0 270) (unlocked yes) (layer "B.Fab") (hide yes) @@ -20766,7 +21209,7 @@ ) ) (property "Manufacturer_Part_Number" "CL05B104KO5NNNC" - (at 0 0 0) + (at 0 0 270) (unlocked yes) (layer "B.Fab") (hide yes) @@ -20780,7 +21223,7 @@ ) ) (property "LCSC" "C1525" - (at 0 0 180) + (at 0 0 90) (unlocked yes) (layer "B.Fab") (hide yes) @@ -20794,7 +21237,7 @@ ) ) (property "Stackup Path" "C_HALL1" - (at 0 -2 0) + (at 0 -2 90) (layer "B.SilkS") (hide yes) (uuid "74297f41-0c5c-420b-aa0d-3fa45b4ef43e") @@ -20805,8 +21248,8 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:33" - (at 0 -2 0) + (property "Stackup Source" "PCB/stackup/board.kdl:32" + (at 0 -2 90) (layer "B.SilkS") (hide yes) (uuid "c3dc2ed3-dbdf-4f89-a9ab-b0abdb45ab89") @@ -20828,24 +21271,24 @@ (attr smd) (duplicate_pad_numbers_are_jumpers no) (fp_line - (start -0.107836 0.36) - (end 0.107836 0.36) + (start -0.107836 -0.36) + (end 0.107836 -0.36) (stroke (width 0.12) (type solid) ) (layer "B.SilkS") - (uuid "e4ab4bb9-b89b-4752-8e5c-86b18a919980") + (uuid "b3585c9c-b911-426a-8189-a6187188ec19") ) (fp_line - (start -0.107836 -0.36) - (end 0.107836 -0.36) + (start -0.107836 0.36) + (end 0.107836 0.36) (stroke (width 0.12) (type solid) ) (layer "B.SilkS") - (uuid "b3585c9c-b911-426a-8189-a6187188ec19") + (uuid "e4ab4bb9-b89b-4752-8e5c-86b18a919980") ) (fp_rect (start -0.91 0.46) @@ -20870,7 +21313,7 @@ (uuid "a33219ce-e443-41de-9f9a-365d7f7231b1") ) (fp_text user "${REFERENCE}" - (at 0 0 0) + (at 0 0 90) (layer "B.Fab") (uuid "fde77968-eeae-4499-a371-55096ab073e0") (effects @@ -20882,7 +21325,7 @@ ) ) (pad "1" smd roundrect - (at -0.48 0 180) + (at -0.48 0 90) (size 0.56 0.62) (layers "B.Cu" "B.Mask" "B.Paste") (roundrect_rratio 0.25) @@ -20891,7 +21334,7 @@ (uuid "516947fa-0031-4bd5-ace4-fe1b9b78b82d") ) (pad "2" smd roundrect - (at 0.48 0 180) + (at 0.48 0 90) (size 0.56 0.62) (layers "B.Cu" "B.Mask" "B.Paste") (roundrect_rratio 0.25) @@ -21034,7 +21477,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:69" + (property "Stackup Source" "PCB/stackup/board.kdl:68" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -21263,7 +21706,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:70" + (property "Stackup Source" "PCB/stackup/board.kdl:69" (at -2 0 0) (layer "B.SilkS") (hide yes) @@ -21479,7 +21922,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:68" + (property "Stackup Source" "PCB/stackup/board.kdl:67" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -21695,7 +22138,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:59" + (property "Stackup Source" "PCB/stackup/board.kdl:58" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -22134,7 +22577,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:40" + (property "Stackup Source" "PCB/stackup/board.kdl:39" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -22499,7 +22942,7 @@ (justify mirror) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:31" + (property "Stackup Source" "PCB/stackup/board.kdl:30" (at 0 -2 270) (layer "B.SilkS") (hide yes) @@ -22896,7 +23339,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:26" + (property "Stackup Source" "PCB/stackup/board.kdl:25" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -23292,7 +23735,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:100" + (property "Stackup Source" "PCB/stackup/board.kdl:102" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -24095,7 +24538,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:76" + (property "Stackup Source" "PCB/stackup/board.kdl:75" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -24340,289 +24783,6 @@ ) (embedded_fonts no) ) - (footprint "Package_TO_SOT_THT:TO-92_Inline" - (layer "B.Cu") - (uuid "91e463fe-146a-485f-9a26-5a8333d488de") - (at 152.7 63 180) - (descr "TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf)") - (tags "to-92 sc-43 sc-43a sot54 PA33 transistor") - (property "Reference" "U_HALL1" - (at 1.27 3.56 0) - (layer "B.SilkS") - (hide yes) - (uuid "1044a6c0-4fee-4039-847b-1177f02ba5aa") - (effects - (font - (size 1 1) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "Value" "DRV5055A2QLPGM" - (at 1.27 -2.79 0) - (layer "B.Fab") - (uuid "4c670d9a-6814-4904-96d3-95f1a2fda210") - (effects - (font - (size 1 1) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "Datasheet" "https://www.ti.com/lit/ds/symlink/drv5055-q1.pdf" - (at 0 0 0) - (unlocked yes) - (layer "B.Fab") - (hide yes) - (uuid "8e708165-7059-4bef-93aa-e9c0d44d559c") - (effects - (font - (size 1.27 1.27) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "Description" "50 mV/mT,±42-mT, 20-kHz, 3.3/5V, TO-92" - (at 0 0 0) - (unlocked yes) - (layer "B.Fab") - (hide yes) - (uuid "1c405ed9-9dca-480e-ae53-adc94db653f7") - (effects - (font - (size 1.27 1.27) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "MF" "Texas Instruments" - (at 0 0 0) - (unlocked yes) - (layer "B.Fab") - (hide yes) - (uuid "dcc5d2c4-9bfc-4552-900c-9788171399b8") - (effects - (font - (size 1 1) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "Manufacturer_Part_Number" "DRV5055A2QLPGM" - (at 0 0 0) - (unlocked yes) - (layer "B.Fab") - (hide yes) - (uuid "5f0ec477-192e-481b-a726-13e7e08559fa") - (effects - (font - (size 1 1) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (property "Stackup Path" "U_HALL1" - (at 0 -2 0) - (layer "B.SilkS") - (hide yes) - (uuid "ceabd61f-c359-46e9-bfeb-7a8aca8076bb") - (effects - (font - (size 1.27 1.27) - (thickness 0.15) - ) - ) - ) - (property "Stackup Source" "PCB/stackup/board.kdl:101" - (at 0 -2 0) - (layer "B.SilkS") - (hide yes) - (uuid "656279a3-4e2f-45d5-b332-a84730a8573f") - (effects - (font - (size 1.27 1.27) - (thickness 0.15) - ) - ) - ) - (property ki_fp_filters "TO?92*") - (path "/f8fef371-899c-529e-91f2-a2d656bd9706") - (units - (unit - (name "A") - (pins "1" "2" "3") - ) - ) - (attr through_hole exclude_from_bom) - (duplicate_pad_numbers_are_jumpers no) - (fp_line - (start -0.53 -1.85) - (end 3.07 -1.85) - (stroke - (width 0.12) - (type solid) - ) - (layer "B.SilkS") - (uuid "ea6de8a1-15ec-41b4-8b43-0c7afaf832a8") - ) - (fp_arc - (start 3.108478 -1.838478) - (mid 3.672087 0.994977) - (end 1.27 2.6) - (stroke - (width 0.12) - (type solid) - ) - (layer "B.SilkS") - (uuid "15905472-1049-4fa5-b5ab-f64411f555df") - ) - (fp_arc - (start 1.27 2.6) - (mid -1.132087 0.994977) - (end -0.568478 -1.838478) - (stroke - (width 0.12) - (type solid) - ) - (layer "B.SilkS") - (uuid "1b095182-f086-44e4-a2de-c2ab313cd9a3") - ) - (fp_line - (start 4 -2.01) - (end 4 2.73) - (stroke - (width 0.05) - (type solid) - ) - (layer "B.CrtYd") - (uuid "eaa3d5b2-7569-4445-8963-c9c50c303973") - ) - (fp_line - (start 4 -2.01) - (end -1.46 -2.01) - (stroke - (width 0.05) - (type solid) - ) - (layer "B.CrtYd") - (uuid "c6cc7987-6979-4a23-9c07-8607d8676903") - ) - (fp_line - (start -1.46 2.73) - (end 4 2.73) - (stroke - (width 0.05) - (type solid) - ) - (layer "B.CrtYd") - (uuid "895596c0-3180-4a1c-afc3-3bc738b81861") - ) - (fp_line - (start -1.46 2.73) - (end -1.46 -2.01) - (stroke - (width 0.05) - (type solid) - ) - (layer "B.CrtYd") - (uuid "dc4bd164-35fb-4216-a782-a4570ac696d2") - ) - (fp_line - (start -0.5 -1.75) - (end 3 -1.75) - (stroke - (width 0.1) - (type solid) - ) - (layer "B.Fab") - (uuid "9b32f4f2-5d9c-4026-aac8-7df102ca5b46") - ) - (fp_arc - (start 3.023625 -1.753625) - (mid 3.561221 0.949055) - (end 1.27 2.48) - (stroke - (width 0.1) - (type solid) - ) - (layer "B.Fab") - (uuid "1bc49c80-cefa-4108-8c5b-b83f9cdb0c2f") - ) - (fp_arc - (start 1.27 2.48) - (mid -1.021221 0.949055) - (end -0.483625 -1.753625) - (stroke - (width 0.1) - (type solid) - ) - (layer "B.Fab") - (uuid "db99bf20-71e2-4347-aac7-b31468af9e4d") - ) - (fp_text user "${REFERENCE}" - (at 1.27 0 0) - (layer "B.Fab") - (uuid "a12f1130-31b4-400c-8eea-f8a912b41386") - (effects - (font - (size 1 1) - (thickness 0.15) - ) - (justify mirror) - ) - ) - (pad "1" thru_hole rect - (at 0 0 180) - (size 1.05 1.5) - (drill 0.75) - (layers "*.Cu" "*.Mask") - (remove_unused_layers no) - (net "3V3") - (pinfunction "VCC_1") - (pintype "power_in") - (uuid "8da2faed-d22b-4fb4-bab5-a4bd474b24f5") - ) - (pad "2" thru_hole oval - (at 1.27 0 180) - (size 1.05 1.5) - (drill 0.75) - (layers "*.Cu" "*.Mask") - (remove_unused_layers no) - (net "GND") - (pinfunction "GND_2") - (pintype "power_in") - (uuid "d64a8155-d620-4643-8888-b123a3b6041f") - ) - (pad "3" thru_hole oval - (at 2.54 0 180) - (size 1.05 1.5) - (drill 0.75) - (layers "*.Cu" "*.Mask") - (remove_unused_layers no) - (net "/Hall_Trigger/TRIG_ANALOG") - (pinfunction "OUT_3") - (pintype "output") - (uuid "de141c6d-ea11-4704-8d72-5ae5b2081957") - ) - (embedded_fonts no) - (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_THT.3dshapes/TO-92_Inline.step" - (offset - (xyz 0 0 0) - ) - (scale - (xyz 1 1 1) - ) - (rotate - (xyz 0 0 0) - ) - ) - ) (footprint "Diode_SMD:D_SOD-123" (layer "B.Cu") (uuid "962f3015-c784-4c0f-aca3-6fb4c2aa0f15") @@ -24764,7 +24924,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:50" + (property "Stackup Source" "PCB/stackup/board.kdl:49" (at -2 0 0) (layer "B.SilkS") (hide yes) @@ -25368,7 +25528,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:72" + (property "Stackup Source" "PCB/stackup/board.kdl:71" (at -2 0 0) (layer "B.SilkS") (hide yes) @@ -25584,7 +25744,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:67" + (property "Stackup Source" "PCB/stackup/board.kdl:66" (at 2 0 0) (layer "B.SilkS") (hide yes) @@ -25800,7 +25960,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:80" + (property "Stackup Source" "PCB/stackup/board.kdl:79" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -26027,7 +26187,7 @@ (justify mirror) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:32" + (property "Stackup Source" "PCB/stackup/board.kdl:31" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -26235,7 +26395,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:75" + (property "Stackup Source" "PCB/stackup/board.kdl:74" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -26451,7 +26611,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:71" + (property "Stackup Source" "PCB/stackup/board.kdl:70" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -26667,7 +26827,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:66" + (property "Stackup Source" "PCB/stackup/board.kdl:65" (at -2 0 0) (layer "B.SilkS") (hide yes) @@ -26883,7 +27043,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:99" + (property "Stackup Source" "PCB/stackup/board.kdl:101" (at -2 0 0) (layer "B.SilkS") (hide yes) @@ -27354,7 +27514,7 @@ (justify mirror) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:30" + (property "Stackup Source" "PCB/stackup/board.kdl:29" (at 0 -2 270) (layer "B.SilkS") (hide yes) @@ -27566,7 +27726,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:57" + (property "Stackup Source" "PCB/stackup/board.kdl:56" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -27791,6 +27951,440 @@ ) ) ) + (footprint "SOT-23" + (layer "B.Cu") + (uuid "f05e52b9-3e61-46e0-9483-c13d27a8515f") + (at 137.8375 71.15) + (descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)") + (tags "SOT TO_SOT_SMD") + (property "Reference" "U_HALL1" + (at 0 2.4 0) + (layer "B.SilkS") + (hide yes) + (uuid "2ebda393-cf3d-41ea-8d0e-e4db05c1bb4a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Value" "DRV5055A2QDBZR" + (at 0 -2.4 0) + (layer "B.Fab") + (uuid "f37f5857-25f5-4c70-9067-ee8f344e6171") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "B.Fab") + (hide yes) + (uuid "b40c82ee-6ddd-4aab-b801-7589b8799d3e") + (effects + (font + (size 1.27 1.27) + ) + (justify mirror) + ) + ) + (property "Description" "" + (at 0 0 0) + (layer "B.Fab") + (hide yes) + (uuid "0fba9579-9f97-4316-99d4-1977ce8bd213") + (effects + (font + (size 1.27 1.27) + ) + (justify mirror) + ) + ) + (property "KiLib_Generator" "package/gullwing" + (at 0 0 0) + (layer "B.SilkS") + (hide yes) + (uuid "b8efecd5-bf04-48a8-ab8c-b110cf41cf96") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MF" "Texas Instruments" + (at 0 -2 0) + (layer "B.SilkS") + (hide yes) + (uuid "3e7019c9-cb2d-46bb-8208-a6fe8f3b36e4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Manufacturer_Part_Number" "DRV5055A2QDBZR" + (at 0 -2 0) + (layer "B.SilkS") + (hide yes) + (uuid "9f667392-d65d-4005-9c98-1d63abd176b5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "LCSC" "C266131" + (at 0 -2 0) + (layer "B.SilkS") + (hide yes) + (uuid "a88c749a-6416-441f-b39f-f0faa1bd3700") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Stackup Path" "U_HALL1" + (at 0 -2 0) + (layer "B.SilkS") + (hide yes) + (uuid "a7e305d6-008b-4b89-8cbf-ce2a97f3ac61") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Stackup Source" "PCB/stackup/board.kdl:103" + (at 0 -2 0) + (layer "B.SilkS") + (hide yes) + (uuid "407ee4f6-0262-4c04-b3e2-6f2b89720048") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/f8fef371-899c-529e-91f2-a2d656bd9706") + (attr smd) + (duplicate_pad_numbers_are_jumpers no) + (fp_line + (start -0.76 -1.56) + (end -0.76 -1.51) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "dde80eb3-1b22-4fde-b947-dd6074989424") + ) + (fp_line + (start -0.76 -0.39) + (end -0.76 0.39) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "16c3ff93-c2a0-4ed8-a407-41291a502ff8") + ) + (fp_line + (start -0.76 1.51) + (end -0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "ea028488-b65e-4d4e-bc77-7924cb6ed942") + ) + (fp_line + (start -0.76 1.56) + (end 0.76 1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "619a6bb9-6c12-4716-a5e8-a1da0ea0e238") + ) + (fp_line + (start 0.76 -1.56) + (end -0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "b009ca57-3574-4e20-a7b6-7bb050c621ed") + ) + (fp_line + (start 0.76 -0.56) + (end 0.76 -1.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "1198e229-86a3-488e-8040-7ec7d2136ba1") + ) + (fp_line + (start 0.76 1.56) + (end 0.76 0.56) + (stroke + (width 0.12) + (type solid) + ) + (layer "B.SilkS") + (uuid "167fc161-c6a8-49ed-91d0-9e7a1a079b54") + ) + (fp_poly + (pts + (xy -1.3 0.38) (xy -1.06 0.05) (xy -1.54 0.05) + ) + (stroke + (width 0.12) + (type solid) + ) + (fill yes) + (layer "B.SilkS") + (uuid "e1d1bf97-e2aa-4e70-9ed4-d60dff13cd06") + ) + (fp_line + (start -1.93 -1.5) + (end -1.93 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "92c18900-ecc8-45f6-95a0-71df3bd0424a") + ) + (fp_line + (start -1.93 -0.39) + (end -0.9 -0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "de0df420-b5c5-4235-b939-639be462c1da") + ) + (fp_line + (start -1.93 0.39) + (end -1.93 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "df7b9cfe-fd63-4376-960b-3db8030674a1") + ) + (fp_line + (start -1.93 1.5) + (end -0.9 1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "431af60d-4fac-4799-b19f-d0d8b40ad760") + ) + (fp_line + (start -0.9 -1.7) + (end -0.9 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "1bf6c027-dd4d-4166-9c26-f085c3f09146") + ) + (fp_line + (start -0.9 -1.5) + (end -1.93 -1.5) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "b049d9d7-4263-410f-b92a-72c8207fbfcc") + ) + (fp_line + (start -0.9 -0.39) + (end -0.9 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "16c06d6b-41f9-474d-9125-8836e080fad8") + ) + (fp_line + (start -0.9 0.39) + (end -1.93 0.39) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "3cbf097e-974b-4248-a7e9-69a98d1e7598") + ) + (fp_line + (start -0.9 1.5) + (end -0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "6a22ca71-4dce-4999-9417-8613e46607eb") + ) + (fp_line + (start -0.9 1.7) + (end 0.9 1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "2cb4d467-6925-4498-90be-ba0da5f56760") + ) + (fp_line + (start 0.9 -1.7) + (end -0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "ce24a11b-ef08-4f04-95be-048d4eb3cb46") + ) + (fp_line + (start 0.9 -0.55) + (end 0.9 -1.7) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "903f849f-b2bd-49cf-a610-ee3fb1905a8d") + ) + (fp_line + (start 0.9 0.55) + (end 1.93 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "fc0095e0-2b69-4634-b941-471afa99fe3b") + ) + (fp_line + (start 0.9 1.7) + (end 0.9 0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "5ea78c98-723f-4a5f-a973-0ff31424002c") + ) + (fp_line + (start 1.93 -0.55) + (end 0.9 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "2db8642f-2d53-47d9-a916-2d2b42b7ecdb") + ) + (fp_line + (start 1.93 0.55) + (end 1.93 -0.55) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "b56093e4-8891-4331-9cc1-5173daceb43e") + ) + (fp_poly + (pts + (xy -0.325 1.45) (xy 0.65 1.45) (xy 0.65 -1.45) (xy -0.65 -1.45) (xy -0.65 1.125) + ) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "B.Fab") + (uuid "e6fc3e52-30ae-40f6-b98d-67ab36ffe2cf") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "B.Fab") + (uuid "b9860d77-678b-44b4-9c28-4f6c3633ca7e") + (effects + (font + (size 0.72 0.72) + (thickness 0.11) + ) + (justify mirror) + ) + ) + (pad "1" smd roundrect + (at -0.9375 0.95) + (size 1.475 0.6) + (layers "B.Cu" "B.Mask" "B.Paste") + (roundrect_rratio 0.25) + (net "3V3") + (uuid "bb2ab2d0-2a2b-4dea-a8b2-6efc299ad607") + ) + (pad "2" smd roundrect + (at -0.9375 -0.95) + (size 1.475 0.6) + (layers "B.Cu" "B.Mask" "B.Paste") + (roundrect_rratio 0.25) + (net "/Hall_Trigger/TRIG_ANALOG") + (uuid "53d8efb4-7b78-4a77-a55c-e957a5baefcf") + ) + (pad "3" smd roundrect + (at 0.9375 0) + (size 1.475 0.6) + (layers "B.Cu" "B.Mask" "B.Paste") + (roundrect_rratio 0.25) + (net "GND") + (uuid "370c9597-7396-440f-bebc-cdfd92fc5c4e") + ) + (embedded_fonts no) + (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) (footprint "Package_TO_SOT_SMD:SOT-23" (layer "B.Cu") (uuid "f2c12f4d-8edf-48f9-b147-c8a6b7a99159") @@ -27941,7 +28535,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:58" + (property "Stackup Source" "PCB/stackup/board.kdl:57" (at 0 2 0) (layer "B.SilkS") (hide yes) @@ -28380,7 +28974,7 @@ ) ) ) - (property "Stackup Source" "PCB/stackup/board.kdl:77" + (property "Stackup Source" "PCB/stackup/board.kdl:76" (at 0 -2 0) (layer "B.SilkS") (hide yes) @@ -28499,18 +29093,6 @@ (layer "Edge.Cuts") (uuid "1c89b8a7-520b-403c-8520-092d58f27abe") ) - (gr_text "D G V" - (at 149.6 62.05 0) - (layer "F.SilkS") - (uuid "211b00bc-2d0a-4690-9e2f-c7120d11f012") - (effects - (font - (size 0.8 0.8) - (thickness 0.1) - ) - (justify left bottom) - ) - ) (gr_text "SCL\nSDA\n3V3\nGND" (at 124 74.55 270) (layer "F.SilkS") @@ -28523,18 +29105,6 @@ (justify left) ) ) - (gr_text "V G D" - (at 153.2 62.05 0) - (layer "B.SilkS") - (uuid "d6d21216-9045-4036-af4c-bd1be0ffac41") - (effects - (font - (size 0.8 0.8) - (thickness 0.1) - ) - (justify left bottom mirror) - ) - ) (gr_text "Snips Controllers V1.2 by @thePunderWoman\ngithub.com/thePunderWoman/SnipsControllers" (at 154.2 115.6 90) (layer "B.SilkS") @@ -28571,6 +29141,14 @@ (justify left bottom mirror) ) ) + (segment + (start 130.8 65.9) + (end 129.85 65.9) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "0248763b-a4d1-4880-a46c-7a3a6cf86776") + ) (segment (start 142 128.77) (end 142.25 129.02) @@ -28587,22 +29165,6 @@ (net "3V3") (uuid "0793684f-7ece-41c4-89b9-07934bf0bfbc") ) - (segment - (start 127.91 67.05) - (end 127.3 67.66) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "0b597493-075b-488c-932a-abe991011110") - ) - (segment - (start 127.91 66.31) - (end 127.91 67.05) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "0c3162c1-e038-4cbe-bdd2-d379722b03cc") - ) (segment (start 146.46 92.52) (end 146.23 92.75) @@ -28620,12 +29182,12 @@ (uuid "0f5090bd-1803-4ca5-87ae-0115a2757e84") ) (segment - (start 126.93 78.73) - (end 126.93 78.8) + (start 129.85 65.9) + (end 129.83 65.92) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "108273c8-6471-4f6a-a5b0-870fee07da79") + (uuid "14f0d4c1-af3f-4298-bf5d-769a1bec18b7") ) (segment (start 141.0155 127.7345) @@ -28660,12 +29222,20 @@ (uuid "1c72a184-4459-49ee-ad8d-cd75efeb4e31") ) (segment - (start 126 66.36) - (end 126 66.275) + (start 126.4 67.4) + (end 127.4 66.4) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "1deeda82-a859-4ec3-b59b-70221bd68760") + (uuid "1feff903-2acc-4b88-bdc7-84d68ced0eb0") + ) + (segment + (start 126.38 67.4) + (end 126.4 67.4) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "20cda70e-6479-4b83-b47b-1fcac37c5d4e") ) (segment (start 135 86.52) @@ -28683,6 +29253,14 @@ (net "3V3") (uuid "2b9321af-241e-4131-bc3a-056c5f6e6510") ) + (segment + (start 124.6 82.8) + (end 124.6 84.425) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "2dddb02b-7f0b-4957-a41a-e11e5f4fd64d") + ) (segment (start 142 128.02) (end 141 129.02) @@ -28692,28 +29270,28 @@ (uuid "302ed978-559f-4371-8600-22d7eeedccf1") ) (segment - (start 123.48 65.53) - (end 123.45 65.5) + (start 129.83 65.92) + (end 129.25 65.92) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "33764d43-5dec-42a7-abdb-bf3c9da9751d") + (uuid "4629df9e-cfd2-4d37-8690-e8282c4a3824") ) (segment - (start 148.55 156.290552) - (end 148.290552 156.55) + (start 126.26 64.59) + (end 126.15 64.7) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "48a73038-09d3-41ae-93e5-94c8e84721be") + (uuid "47940eb5-4f86-49d6-ad21-81ffe148db94") ) (segment - (start 126.2 78) - (end 126.93 78.73) + (start 148.55 156.290552) + (end 148.290552 156.55) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "52eb3df3-4b9e-461b-a9b5-0f285266d0d4") + (uuid "48a73038-09d3-41ae-93e5-94c8e84721be") ) (segment (start 148.290552 156.55) @@ -28731,6 +29309,22 @@ (net "3V3") (uuid "618a10d1-3938-4c14-964a-c3ef2ef36d08") ) + (segment + (start 126.81 65.36) + (end 126.15 64.7) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "6fcf5ab9-0484-4acb-9496-114897b7394d") + ) + (segment + (start 127.5 65.36) + (end 127.74 65.36) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "7a5e1076-e290-4fd3-bcb6-bc45c0ae669c") + ) (segment (start 138.75 130) (end 137.76 130) @@ -28739,6 +29333,30 @@ (net "3V3") (uuid "89184818-0639-4947-99c2-168f8f470479") ) + (segment + (start 127.98 65.92) + (end 127.5 66.4) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "8ad6c562-96d1-499e-9be1-560495919a2f") + ) + (segment + (start 124.65 84.775) + (end 124.8 84.625) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "8ce34c64-e899-4f1f-8709-efe8ba2cf875") + ) + (segment + (start 124.6 84.425) + (end 124.8 84.625) + (width 0.2) + (layer "F.Cu") + (net "3V3") + (uuid "90996d79-32f1-48f2-a393-996f4ddbc416") + ) (segment (start 146.23 92.75) (end 146.25 92.75) @@ -28748,28 +29366,28 @@ (uuid "93106172-6542-453d-b993-d085c9d77926") ) (segment - (start 139.6 146.78) - (end 138.88 146.78) + (start 128.3 65.92) + (end 127.98 65.92) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "9dc26177-7997-45eb-b686-9fb257a4be1e") + (uuid "93c6186c-41bd-4133-a5d3-b96cafa2c34e") ) (segment - (start 123.5 69) - (end 123.5 67.02) + (start 127.5 65.36) + (end 126.81 65.36) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "9e479e91-0420-4f6a-b586-7002bdb3a0b4") + (uuid "9c08ba21-ae66-4206-baee-6e77e0fee063") ) (segment - (start 123.48 67) - (end 123.48 65.53) + (start 139.6 146.78) + (end 138.88 146.78) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "a689aca4-3268-47f4-a69f-13bdf8f5e1cd") + (uuid "9dc26177-7997-45eb-b686-9fb257a4be1e") ) (segment (start 145 156.55) @@ -28804,20 +29422,12 @@ (uuid "b2d6e4fe-1896-49c7-9920-b5e1fd79fe9c") ) (segment - (start 126 66.09) - (end 127.5 64.59) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "b3859825-fe68-4b40-8272-f18054290189") - ) - (segment - (start 129.83 65.92) - (end 130.75 65) + (start 127.74 65.36) + (end 128.3 65.92) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "be6e48d3-8366-4c33-a708-95ae1f038071") + (uuid "b8ca613f-c30b-452a-af61-911565be8b72") ) (segment (start 151.27 153.23) @@ -28836,20 +29446,20 @@ (uuid "c4b2eaf0-33dd-41e9-9adf-d91a2017908a") ) (segment - (start 126 66.275) - (end 126 66.09) + (start 122.6 86.3) + (end 123.9 86.3) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "cb6f7afe-6ad9-4e4c-a541-47e021bd5833") + (uuid "cf252ae5-41a1-4286-a925-3fd8d96e684b") ) (segment - (start 128.3 65.92) - (end 127.91 66.31) + (start 124.8 84.625) + (end 124.8 85.4) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "cd8f94f1-0772-412b-8dd3-4de857b1ff03") + (uuid "cf83da13-f5e6-497f-990d-e74902266517") ) (segment (start 144.25 133) @@ -28868,20 +29478,12 @@ (uuid "d009edb2-b396-4f2d-b0ef-12a75806f2e9") ) (segment - (start 123.5 67.02) - (end 123.48 67) + (start 124.8 85.4) + (end 123.9 86.3) (width 0.2) (layer "F.Cu") (net "3V3") - (uuid "d061c97e-f9c6-4bd5-b28e-de6b2bd91c52") - ) - (segment - (start 126 66.275) - (end 124.225 66.275) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "d692c057-840b-4fad-8be9-328e64def07e") + (uuid "d0cda970-1475-4622-8288-16e9c2299900") ) (segment (start 142 127.5) @@ -28907,14 +29509,6 @@ (net "3V3") (uuid "deb7b23f-7a01-43f1-87a2-ad5b1782fb47") ) - (segment - (start 127.3 67.66) - (end 126 66.36) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "e18530ba-c2ec-4783-a618-e0d31579f0c0") - ) (segment (start 150.5 153.23) (end 150.5 153.5) @@ -28931,14 +29525,6 @@ (net "3V3") (uuid "e933feb3-c5bb-4bbd-a6f2-e8df9387e7c7") ) - (segment - (start 126.93 78.8) - (end 127.2 79.07) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "e9855d56-53a1-4b57-a947-72ea5fa1b71d") - ) (segment (start 148.5 92.52) (end 146.46 92.52) @@ -28979,14 +29565,6 @@ (net "3V3") (uuid "f07ba9d2-8df2-4087-a023-c4ad3d5b6fff") ) - (segment - (start 129.25 65.92) - (end 129.83 65.92) - (width 0.2) - (layer "F.Cu") - (net "3V3") - (uuid "f787c450-f807-46dc-bc82-a1e20fa43f8a") - ) (segment (start 150.5 153.23) (end 151.27 153.23) @@ -29003,13 +29581,13 @@ (net "3V3") (uuid "fb34f19f-5842-45ee-99d2-189e579a73c8") ) - (segment - (start 124.225 66.275) - (end 123.45 65.5) - (width 0.2) - (layer "F.Cu") + (via + (at 140.9 72.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") (net "3V3") - (uuid "fd208efc-fbcc-4c1f-918e-8de0b5c9da75") + (uuid "16373c0c-3057-4fcc-b950-87d275dd0937") ) (via (at 139.342332 122.557668) @@ -29043,6 +29621,14 @@ (net "3V3") (uuid "5ef528bc-0cdf-4d7d-8ce2-b8992da76c57") ) + (via + (at 122.6 86.3) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "3V3") + (uuid "65da4c30-4f4d-4b0b-8164-f1d877e67e0f") + ) (via (at 135.5 88) (size 0.6) @@ -29084,7 +29670,7 @@ (uuid "a8173d96-d387-4260-b4bb-1755ac9272b9") ) (via - (at 130.75 65) + (at 130.8 65.9) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -29099,14 +29685,6 @@ (net "3V3") (uuid "be6ded47-95f0-415a-a9c9-952f5f663ef6") ) - (via - (at 126.2 78) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "3V3") - (uuid "ca010254-77b9-420c-bcce-d75cc03c24d8") - ) (via (at 147.5 83) (size 0.6) @@ -29171,6 +29749,14 @@ (net "3V3") (uuid "15a9c4f6-6428-48a5-acc1-e8f194e1b91f") ) + (segment + (start 139.5 73.48) + (end 140.32 73.48) + (width 0.2) + (layer "B.Cu") + (net "3V3") + (uuid "1682d034-4156-409e-b2ba-52a58f9f74c0") + ) (segment (start 125 110) (end 123.5 110) @@ -29204,12 +29790,12 @@ (uuid "3903144d-b7c5-4dd3-a19d-3c8e1c0c01fc") ) (segment - (start 152 66) - (end 152.7 65.3) + (start 138.28 73.48) + (end 136.9 72.1) (width 0.2) (layer "B.Cu") (net "3V3") - (uuid "3f82ee36-60d5-4ed9-9f45-8c46cbf1b1da") + (uuid "48afa36f-2771-4675-b674-5b74ebfcbb2e") ) (segment (start 139.1 122.8) @@ -29219,14 +29805,6 @@ (net "3V3") (uuid "5006258f-521b-4a14-9c95-d84cc293bcb0") ) - (segment - (start 152.7 65.3) - (end 152.7 63) - (width 0.2) - (layer "B.Cu") - (net "3V3") - (uuid "745ef8f4-9803-4e7f-8b86-b1813911e437") - ) (segment (start 140.8 76.25) (end 140 75.45) @@ -29259,14 +29837,6 @@ (net "3V3") (uuid "9d3e5a14-8ff0-41d6-85cc-57889c9104f1") ) - (segment - (start 152.75 63.641726) - (end 152.75 63) - (width 0.2) - (layer "B.Cu") - (net "3V3") - (uuid "a3426dc5-652e-4a0c-9dbb-30f8a36a50b4") - ) (segment (start 123.5 110) (end 123.5 111.765) @@ -29307,6 +29877,14 @@ (net "3V3") (uuid "d10a13a0-c988-4720-9eae-3320ed9b5ef1") ) + (segment + (start 140.32 73.48) + (end 140.9 72.9) + (width 0.2) + (layer "B.Cu") + (net "3V3") + (uuid "d154f0ef-e6fb-481a-9d9a-0b1631bf488b") + ) (segment (start 123.5 111.765) (end 122.525 112.74) @@ -29315,6 +29893,14 @@ (net "3V3") (uuid "d8e92562-21af-4d9a-a59d-0b7771df7658") ) + (segment + (start 139.5 73.48) + (end 138.28 73.48) + (width 0.2) + (layer "B.Cu") + (net "3V3") + (uuid "ef62818d-a1b4-4ac2-a3f1-3b1ed49d3bac") + ) (segment (start 141.76 79.4) (end 142.8 79.4) @@ -29332,68 +29918,68 @@ (uuid "f9362c78-7ea0-4833-af9b-605e48dd350b") ) (segment - (start 137.365 83.36) - (end 137.025 83.7) + (start 134.174314 84.26) + (end 132.057108 86.377207) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "0594e38a-b31e-43b2-b41a-abc7bc68ca2a") + (uuid "0ae7019a-1b36-4a0b-95bc-2f04bb9d042f") ) (segment - (start 133.405687 84.26) - (end 131.507108 86.158579) + (start 137.025 83.7) + (end 135.900685 83.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "0656463d-4168-45c3-925a-30d6d0f012ea") + (uuid "1c35bd89-e825-4dbb-9912-9c903831ca5b") ) (segment - (start 136 117.743348) - (end 136 127.5) + (start 131.924265 86.575736) + (end 137.046917 91.698388) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "1c56f9bd-a7cb-4ad4-8152-e2cb92dd4a59") + (uuid "1f1e2a97-2565-448f-8bd6-0da68ef20717") ) (segment (start 134.63637 84.26) - (end 133.405687 84.26) + (end 134.174314 84.26) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "36116ddf-c57c-4f78-bedb-640f55c7a7e0") + (uuid "35fc0c1c-5c74-4637-a1ce-a5bf2464da71") ) (segment - (start 137.046917 116.696431) - (end 136 117.743348) + (start 137.046917 91.698388) + (end 137.046917 116.696431) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "57ff641a-f519-4fb6-a30e-58ea1cbebcc2") + (uuid "3af5c47a-0e75-40f3-b76a-2c714b75ecbe") ) (segment - (start 137.025 83.7) - (end 135.900685 83.7) + (start 132.057108 86.442893) + (end 131.924265 86.575736) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "671a8fac-ed64-4ea1-8a7a-343c4af13377") + (uuid "3d6a275f-af20-4f91-bcb2-8dc8e0f02737") ) (segment - (start 135.036371 83.86) + (start 135.036369 83.86) (end 134.63637 84.26) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "79b0d0a5-fc60-49e5-a768-caba5a74252a") + (uuid "43661269-8e5a-4985-8bd0-58c7c9dc6492") ) (segment - (start 137.046917 91.698388) - (end 137.046917 116.696431) + (start 136 117.743348) + (end 136 127.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "8b40f50d-c307-4c8c-a682-c5a3416558d4") + (uuid "4f4a7695-7257-4f0d-be8a-e80f5ce085de") ) (segment (start 137.365 82.41) @@ -29401,31 +29987,47 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "c5fce76c-c503-46cb-9260-e9eef5de6131") + (uuid "5fe79e29-523a-45bd-ab08-b999b3558b66") ) (segment - (start 131.507108 86.158579) - (end 137.046917 91.698388) + (start 137.046917 116.696431) + (end 136 117.743348) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MISO") + (uuid "6b2c0999-ae4c-4bd4-bccd-c5e0595c0108") + ) + (segment + (start 135.900685 83.7) + (end 135.740685 83.86) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "c8e00a29-a64d-4696-8e8d-60f6bb7b07ba") + (uuid "719f8f25-3ce8-4086-bf1b-87e31139777d") + ) + (segment + (start 132.057108 86.377207) + (end 132.057108 86.442893) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MISO") + (uuid "7f1153d5-cc9e-4e48-917c-ab4ae99d05d4") ) (segment (start 135.740685 83.86) - (end 135.036371 83.86) + (end 135.036369 83.86) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "d582c318-931e-495b-8a1f-f85b18857837") + (uuid "d29e179c-317b-443c-aa9a-d7e33defb671") ) (segment - (start 135.900685 83.7) - (end 135.740685 83.86) + (start 137.365 83.36) + (end 137.025 83.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MISO") - (uuid "f37c2af0-03a6-45d6-bf4a-ffd80f050e34") + (uuid "eb85ab24-a8bd-4876-96d7-5dcfe1f5daa9") ) (segment (start 134.24 127.74) @@ -29556,76 +30158,68 @@ (uuid "f5c8282d-991f-404a-a819-e4aeac9cda0d") ) (segment - (start 131.1 81.05) - (end 131.3 80.85) - (width 0.2) - (layer "B.Cu") - (net "XBEE_SLEEP_RQ") - (uuid "015c07ed-f658-4014-9199-a30d82d67a97") - ) - (segment - (start 132.834315 69.4) - (end 144.948529 69.4) + (start 131.95 70.284315) + (end 133.434315 68.8) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "1a20fa1c-9b60-4b1c-a19b-8888f815ffac") + (uuid "27d58d7f-9c72-489a-9b64-456d62fe5953") ) (segment - (start 131.95 80.101471) - (end 131.95 70.284315) + (start 131.1 87.35) + (end 131.6 86.85) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "2426ddaf-4296-47d8-88b8-62b24a81a017") + (uuid "38af8eab-dc2f-4591-b033-80cb2b3134d5") ) (segment - (start 131.3 80.85) - (end 131.3 80.751471) + (start 145.4 69.851471) + (end 145.4 70.95) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "290a9ea0-ca2e-405f-879b-42975712b22b") + (uuid "4e1f43e3-03a0-4020-95d2-4896a576acf2") ) (segment - (start 131.95 70.284315) - (end 132.834315 69.4) + (start 131.6 80.451471) + (end 131.95 80.101471) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "66249397-ce98-4f94-b073-ab2f5b78f098") + (uuid "4f2e4f50-f20a-453b-b0f9-cad82a055eb3") ) (segment - (start 131.1 87.35) - (end 131.1 81.05) + (start 131.6 86.85) + (end 131.6 80.451471) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "66f1939d-9dfc-4e4c-91cb-446168994aa8") + (uuid "5bce5317-c6b1-4c66-aaac-bda97725d523") ) (segment - (start 144.948529 69.4) - (end 145.4 69.851471) + (start 133.434315 68.8) + (end 144.348529 68.8) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "7a2fb79d-cca3-433c-80e4-de7044eef823") + (uuid "5c10332f-1d1f-4954-ab87-00f5d9f8f0f0") ) (segment - (start 131.3 80.751471) - (end 131.95 80.101471) + (start 131.95 80.101471) + (end 131.95 70.284315) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "e557a0c1-37c9-43ae-87a4-2e22cf1cbb44") + (uuid "76dc4d03-e324-477f-9371-edf7fd3f07bb") ) (segment - (start 145.4 69.851471) - (end 145.4 70.95) + (start 144.348529 68.8) + (end 145.4 69.851471) (width 0.2) (layer "B.Cu") (net "XBEE_SLEEP_RQ") - (uuid "f2b78359-a740-4db4-b8b3-dd1959ba8fb6") + (uuid "76e4c8bc-3453-4081-b735-fc86ecbd4d39") ) (segment (start 143.75 130.775) @@ -29643,6 +30237,14 @@ (net "GND") (uuid "040aa6ff-11eb-4e19-9893-66701097ab17") ) + (segment + (start 126.3 66.4) + (end 124.6 64.7) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "0af0174a-f73b-49b0-aa43-d3bf7a3f4e94") + ) (segment (start 137.9 70.97) (end 136.5 70.97) @@ -29652,20 +30254,20 @@ (uuid "0d1cf115-ea42-4311-80c2-ed5f71d1677e") ) (segment - (start 147.5 157.55) - (end 146.7 158.35) + (start 123.2 64.2) + (end 123.65 63.75) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "10157f42-9834-482c-a291-2fbed7ff0767") + (uuid "0f97b6c1-d739-4ce3-b7a1-424bcd69ea66") ) (segment - (start 129.85 64.65) - (end 130.75 63.75) + (start 147.5 157.55) + (end 146.7 158.35) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "11b14713-0559-4c95-9e65-347b01634851") + (uuid "10157f42-9834-482c-a291-2fbed7ff0767") ) (segment (start 146.7 158.35) @@ -29675,22 +30277,6 @@ (net "GND") (uuid "15caf57e-df47-4ef6-931e-0dc27fefd195") ) - (segment - (start 124.57 84.97) - (end 124.4 84.8) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "16fce69b-e464-4846-a12c-340eb38c0c3d") - ) - (segment - (start 128.376134 64.65) - (end 127.770909 65.255225) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "1719c8f1-8acf-45bd-ae92-9234f9051af6") - ) (segment (start 141 129.98) (end 141 130.98) @@ -29707,14 +30293,6 @@ (net "GND") (uuid "1f017e4c-6cbb-4c15-8089-169cbe25ed9a") ) - (segment - (start 122.575 64.475) - (end 121.55 65.5) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "219c2f97-3b97-4476-aafd-b3fad260dad4") - ) (segment (start 150.5 151.5) (end 149.8 150.8) @@ -29731,6 +30309,14 @@ (net "GND") (uuid "2341cf2a-27e1-47ce-824c-a593cc917430") ) + (segment + (start 123.92647 90.5) + (end 122.65 90.5) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "23b0d9db-5460-4470-afef-dca8659184b6") + ) (segment (start 134.25 131.25) (end 126.25 131.25) @@ -29740,12 +30326,12 @@ (uuid "26374b34-29f8-4535-ba9c-40d80a2ed5b4") ) (segment - (start 122.65 90.5) - (end 123.92647 90.5) + (start 146.75 64.65) + (end 150.249999 64.65) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "27695dc0-602d-4f20-ad5e-fed51b682466") + (uuid "29de7707-a556-4441-b0c5-0bf94aea3dd8") ) (segment (start 141.5 132.55) @@ -29827,6 +30413,14 @@ (net "GND") (uuid "36be2999-213b-462f-baff-3761b90f2a9f") ) + (segment + (start 123.4 64.7) + (end 123.2 64.5) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "3aa30a81-a180-4db2-99a0-5feb7dcfff03") + ) (segment (start 145.8 153.35) (end 145.8 153.3) @@ -29843,22 +30437,6 @@ (net "GND") (uuid "3bbcf840-e88b-458e-9609-6bdf15d8343e") ) - (segment - (start 139.23 73.77) - (end 139.25 73.75) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "3f4fe7ec-751b-48fd-93be-5dd1991cb052") - ) - (segment - (start 122.52 68.48) - (end 122.52 67) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "40c66c33-d68a-44e3-b734-92daa0c254b3") - ) (segment (start 136.5 72.37) (end 136.5 73.77) @@ -29867,14 +30445,6 @@ (net "GND") (uuid "414dc2ab-81ec-4517-a3bc-6eb847e982c0") ) - (segment - (start 121.55 65.5) - (end 121.55 66.95) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "41db8424-acaf-4a8b-8df9-66ea75e9aee6") - ) (segment (start 150.75 112.5) (end 152.75 112.5) @@ -29932,60 +30502,28 @@ (uuid "55349843-9a05-4ce5-84e8-f276d9b30088") ) (segment - (start 127.770909 65.255225) - (end 127.782841 65.267157) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "5d4fc55f-f367-4a2f-914a-f69adf951549") - ) - (segment - (start 129.25 64.65) - (end 128.376134 64.65) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "5fb72991-c0ab-4da4-a420-899eeec5ea16") - ) - (segment - (start 123.799999 64.475) - (end 122.575 64.475) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "5fbb311e-ea09-4d1f-a19d-8ffcedd72a5a") - ) - (segment - (start 121.55 66.95) - (end 121.5 67) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "634cd7d7-2228-4b24-895f-b287da19c171") - ) - (segment - (start 125.825001 64.65) - (end 124.725 63.549999) + (start 123.939705 90.513235) + (end 123.92647 90.5) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "65f434bf-9116-4852-9813-e64a5fb6a3e2") + (uuid "587b6025-cd88-4862-a555-660c1178dbaf") ) (segment - (start 137.9 73.77) - (end 139.23 73.77) + (start 126.44 66.4) + (end 126.3 66.4) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "68ff27a8-f7cf-47c0-9255-0b9f7fc07d09") + (uuid "60073907-e720-4c32-8d1f-7f5071e28287") ) (segment - (start 122.5 69) - (end 122.5 68.5) + (start 124.5 87.9) + (end 124.4 88) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "6920b765-cbed-4656-aaa7-d73c2e021458") + (uuid "659efe88-d4d0-4e59-b95b-ce7be5941b76") ) (segment (start 126.25 131.25) @@ -30004,52 +30542,52 @@ (uuid "6d2c7743-c80b-41e0-bb16-0dd83175717f") ) (segment - (start 123.92647 90.5) - (end 124.088235 90.338235) + (start 125.48 87.9) + (end 124.5 87.9) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "6ff423a2-f104-4ac8-86b2-ac10499ab0ea") + (uuid "6ecd7894-3df4-47df-a0bc-ea6c8b9bade1") ) (segment - (start 122.5 68.5) - (end 122.52 68.48) + (start 135.1 72.37) + (end 135.1 73.77) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "7160a2af-1dc5-4442-9fa6-1afc979d5ee0") + (uuid "766d8a38-7549-4baf-b716-ea4299a70bf2") ) (segment - (start 127.5 65.55) - (end 127.5 66.5) + (start 140 86.52) + (end 140 87.5) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "7516ab1b-da13-4cc3-8fa0-8c101ecea5e4") + (uuid "7890ccfb-a8d0-47b7-9255-5c258231bc69") ) (segment - (start 135.1 72.37) - (end 135.1 73.77) + (start 125.76 82.96) + (end 125.6 82.8) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "766d8a38-7549-4baf-b716-ea4299a70bf2") + (uuid "795a264f-5e35-47f0-bd26-c7806984e12a") ) (segment - (start 140 86.52) - (end 140 87.5) + (start 125.8 87.58) + (end 125.48 87.9) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "7890ccfb-a8d0-47b7-9255-5c258231bc69") + (uuid "7e681e13-34a7-4f76-ba87-8b62a3f98823") ) (segment - (start 122.52 67) - (end 122.52 66.47) + (start 140.13 72.37) + (end 140.7 71.8) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "7f997645-26f3-4d96-a6cd-4e15a45deff2") + (uuid "7e7ec83b-cad9-4d66-9b1a-cae9cc608a75") ) (segment (start 134.095 153.055) @@ -30060,28 +30598,28 @@ (uuid "813e5051-8ae3-414a-bec5-0b2c117487a4") ) (segment - (start 129.25 64.65) - (end 129.85 64.65) + (start 141.665 153.97) + (end 140.75 153.055) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "85f2b1bd-76fd-47f5-b1e1-1d11560011bb") + (uuid "866e0d4e-7116-4400-9963-a84bc508b259") ) (segment - (start 141.665 153.97) - (end 140.75 153.055) + (start 129.25 64.65) + (end 127.75 64.65) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "866e0d4e-7116-4400-9963-a84bc508b259") + (uuid "8b43dcb1-5760-440a-aa63-6500be63e852") ) (segment - (start 127.5 66.5) - (end 127.3 66.7) + (start 150.249999 64.65) + (end 151.35 63.549999) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "86fd9344-1a21-4f85-8d0d-3d6a9228377a") + (uuid "8c3ab1e7-9eef-4473-8f9c-7020d0ac345d") ) (segment (start 145.7 64.65) @@ -30107,6 +30645,14 @@ (net "GND") (uuid "9a80f893-bdc4-4f53-bf46-45520b47a246") ) + (segment + (start 123.65 63.75) + (end 123.65 62.65) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "9cc4c7ea-562c-4858-8397-c06c07bcd806") + ) (segment (start 124.475 100.525) (end 124.5 100.5) @@ -30147,14 +30693,6 @@ (net "GND") (uuid "a200575a-de9b-4c7c-a6df-06561faafe77") ) - (segment - (start 124.725 63.549999) - (end 123.799999 64.475) - (width 0.2) - (layer "F.Cu") - (net "GND") - (uuid "a5380b7d-4357-4f4f-a263-424544d82a4a") - ) (segment (start 150.5 152.225) (end 151.65 151.075) @@ -30195,6 +30733,22 @@ (net "GND") (uuid "b232d2a9-96ad-4bd0-b94b-e6faf04fe122") ) + (segment + (start 151.35 63.549999) + (end 151.35 62.65) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "b3413ea0-4aea-4fba-a1d4-46c3911d08b8") + ) + (segment + (start 125.76 84.625) + (end 125.76 86.26) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "b4629f36-549b-43f7-b7de-3d62182cf067") + ) (segment (start 122.65 100.525) (end 124.475 100.525) @@ -30211,6 +30765,14 @@ (net "GND") (uuid "b96e4d52-0a05-4501-9927-133a2a823b71") ) + (segment + (start 124.088235 90.513235) + (end 123.939705 90.513235) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "bae78ac3-2a49-4fd1-98dc-bea12a49cde5") + ) (segment (start 141.5 133.55) (end 142.5 134.55) @@ -30219,6 +30781,22 @@ (net "GND") (uuid "bce2b468-cb20-4fe4-a848-d7022de8f39b") ) + (segment + (start 125.76 86.26) + (end 125.8 86.3) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "be71d095-1f2a-4a9f-809a-05c26ee8fecd") + ) + (segment + (start 137.9 72.37) + (end 140.13 72.37) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "c22534b7-f060-4866-a112-b42cfb94d326") + ) (segment (start 142.02 158.35) (end 141.82 158.15) @@ -30228,12 +30806,12 @@ (uuid "c47e6e9d-cc39-4214-a285-447d01965c07") ) (segment - (start 122.52 66.47) - (end 121.55 65.5) + (start 127.75 64.65) + (end 127.5 64.4) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "c57772d4-8408-4bc1-83bd-39cbcefeafe7") + (uuid "c5eacda1-68dc-434b-9ec0-bad658d16362") ) (segment (start 141.82 153.97) @@ -30268,20 +30846,20 @@ (uuid "cbfc7713-3ab4-4e38-bbfc-e469edd0ace3") ) (segment - (start 150.5 152.27) - (end 150.5 151.5) + (start 125.8 86.3) + (end 125.8 87.58) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "cc797c3a-2f85-4018-a88a-921ebb6cc0a5") + (uuid "cc463c5f-6e90-4b27-a82d-d1b83cc11c51") ) (segment - (start 124.57 85.8) - (end 124.57 84.97) + (start 150.5 152.27) + (end 150.5 151.5) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "cc804c4c-34b2-40d1-b735-7a306df5fa7e") + (uuid "cc797c3a-2f85-4018-a88a-921ebb6cc0a5") ) (segment (start 130.25 121.25) @@ -30291,6 +30869,14 @@ (net "GND") (uuid "ceec4444-6a5e-42b4-8819-1c4087a37bce") ) + (segment + (start 130.8 64.7) + (end 129.9 64.7) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "d00c09d6-529c-4ae4-bec1-346d424e5e6c") + ) (segment (start 137.9 72.37) (end 137.9 70.97) @@ -30348,12 +30934,28 @@ (uuid "e9076529-4151-4514-9f15-795c03eebaff") ) (segment - (start 124.725 62.65) - (end 124.725 63.549999) + (start 129.85 64.65) + (end 129.25 64.65) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "eb7ec57f-a0bb-4f6a-8d29-fcf3b0e81d35") + ) + (segment + (start 123.2 64.5) + (end 123.2 64.2) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "effe5075-81dc-4e73-bbcb-e116a79fc00e") + ) + (segment + (start 129.9 64.7) + (end 129.85 64.65) (width 0.2) (layer "F.Cu") (net "GND") - (uuid "ee7b792d-9b5c-4a54-8314-f86c63175480") + (uuid "f5773d79-ec89-4a11-88bd-4a25a4cd202b") ) (segment (start 131.05 111.95) @@ -30371,6 +30973,30 @@ (net "GND") (uuid "f6e9a953-7ec2-45b7-a74a-88fd68251ed5") ) + (segment + (start 125.76 84.625) + (end 125.76 82.96) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "f7c54865-0956-4351-ac3f-eddce57fb633") + ) + (segment + (start 124.6 64.7) + (end 123.4 64.7) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "fad7d35a-b613-41f2-b8c4-d7b0b1a0de43") + ) + (segment + (start 123.65 62.65) + (end 123.799999 62.800001) + (width 0.2) + (layer "F.Cu") + (net "GND") + (uuid "fc3e77a8-b215-4089-8c7a-e020ee99a7b3") + ) (segment (start 135.1 70.97) (end 135.1 72.37) @@ -30388,7 +31014,7 @@ (uuid "ff728700-ca21-4c66-865f-5a54a0e87d42") ) (via - (at 121.5 67) + (at 123.2 64.5) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -30476,7 +31102,7 @@ (uuid "4b6cd2d0-eed8-4cd5-a249-667de89f09ca") ) (via - (at 130.75 63.75) + (at 130.8 64.7) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -30548,7 +31174,7 @@ (uuid "745966c3-b550-4315-9b19-2dfc56ca1b06") ) (via - (at 124.088235 90.338235) + (at 124.088235 90.513235) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -30628,12 +31254,12 @@ (uuid "c65935ca-1678-4f9a-b350-88c69b7d8b79") ) (via - (at 124.4 84.8) + (at 140.7 71.8) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "GND") - (uuid "c9730685-7dc7-4f9e-a658-1aa94f5b56fe") + (uuid "d4f464d5-9f7f-472b-8fbf-c11471a9b57a") ) (via (at 152.5 121.25) @@ -30644,28 +31270,28 @@ (uuid "d878bfb8-9be5-4d6d-97e4-932bbf065116") ) (via - (at 145.8 153.3) + (at 124.4 88) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "GND") - (uuid "dfd66953-f517-466d-adc0-a0549f1926be") + (uuid "dceefda5-da92-4b70-a9d8-6b6ade1ffaf0") ) (via - (at 150.5 90.5) + (at 145.8 153.3) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "GND") - (uuid "ec2b455e-a86d-46cf-a67e-c5d373a35b7e") + (uuid "dfd66953-f517-466d-adc0-a0549f1926be") ) (via - (at 139.25 73.75) + (at 150.5 90.5) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "GND") - (uuid "ee38b51b-d3b5-483e-a314-aee73d903431") + (uuid "ec2b455e-a86d-46cf-a67e-c5d373a35b7e") ) (via (at 129 119) @@ -30715,14 +31341,6 @@ (net "GND") (uuid "00e1bc70-afb4-43de-b858-b86a94d0503a") ) - (segment - (start 151.43 63) - (end 151.43 65.61) - (width 0.2) - (layer "B.Cu") - (net "GND") - (uuid "00f8fa07-ef93-4353-a891-e9cf7b1b2f3c") - ) (segment (start 143.2375 77.5625) (end 143.6 77.2) @@ -30811,6 +31429,14 @@ (net "GND") (uuid "36b7964c-1140-49cc-8706-3465f4596ae3") ) + (segment + (start 140.22 71.8) + (end 140.7 71.8) + (width 0.2) + (layer "B.Cu") + (net "GND") + (uuid "38b1dd34-f1f4-43bb-b063-d34b3cc33e17") + ) (segment (start 151.8 113.84) (end 151.8 113.45) @@ -30819,6 +31445,14 @@ (net "GND") (uuid "3a1bd22f-c404-45df-a52a-caee0b315a79") ) + (segment + (start 139.5 71.875) + (end 138.775 71.15) + (width 0.2) + (layer "B.Cu") + (net "GND") + (uuid "3a80d152-c151-423b-b50d-da11cc742f3e") + ) (segment (start 131.475 110) (end 131.475 110.775) @@ -30867,6 +31501,14 @@ (net "GND") (uuid "52f26b77-3b92-4bd2-b57c-30ce64cd5dce") ) + (segment + (start 140.22 71.8) + (end 139.5 72.52) + (width 0.2) + (layer "B.Cu") + (net "GND") + (uuid "536648dc-25ff-4ce3-999d-9b463e01ac10") + ) (segment (start 125 122.5) (end 125 121.02) @@ -30883,6 +31525,14 @@ (net "GND") (uuid "5d62a0be-24c0-4d08-a55a-7dc2982bd675") ) + (segment + (start 139.5 72.52) + (end 139.5 71.875) + (width 0.2) + (layer "B.Cu") + (net "GND") + (uuid "6bcd55a5-1b19-4457-85af-6ea5875eff8a") + ) (segment (start 131.2 111.2) (end 131.05 111.2) @@ -31187,14 +31837,6 @@ (net "GND") (uuid "f67b05d6-63e1-4bf8-abe8-d9f534075dff") ) - (segment - (start 151.43 65.61) - (end 151.04 66) - (width 0.2) - (layer "B.Cu") - (net "GND") - (uuid "f9552dd8-671f-41cc-8237-cd6fa055bd9f") - ) (segment (start 140.8 79.4) (end 140.8 78.225) @@ -31204,44 +31846,44 @@ (uuid "fdd8ca29-3ec0-4ee2-a7ec-90c1a8b82978") ) (segment - (start 134.470685 83.86) - (end 133.24 83.86) + (start 130.5 87.101471) + (end 130.5 87.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "028a9844-b4f5-4952-b9ff-3aa63705b1bf") + (uuid "04f579ff-2419-438f-91a1-c75458d2d8c3") ) (segment - (start 133.24 83.86) - (end 129.6 87.5) + (start 126.6 114.7) + (end 122.1 119.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "02b6028e-0283-48ad-b0b2-4721e80fa712") + (uuid "1fd38e3d-3b10-43e3-bced-5da4a8456d7c") ) (segment - (start 134.705 83.46) - (end 134.705 83.625685) + (start 129.6 100.7) + (end 126.6 103.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "105ba987-35eb-4966-a20c-35c7daf7a7a4") + (uuid "2313f065-d5e6-40f3-8ca6-00047bf57477") ) (segment - (start 126.6 103.7) - (end 126.6 114.7) + (start 122.1 134.2) + (end 124 136.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "14e1d9d5-8fef-4ff9-b781-26da6faae869") + (uuid "2dac8be0-93d1-4768-a319-d46f88f23fc4") ) (segment - (start 122.1 119.2) - (end 122.1 134.2) + (start 135.575 83.025) + (end 135.575 83.46) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "304fc9bc-baad-4e3e-a200-8f2821edfe64") + (uuid "3251c83d-5ebc-4ad6-a973-ad5c24158c7c") ) (segment (start 134.705 83.625685) @@ -31249,47 +31891,55 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "30bb5772-9b3b-4aa6-a7a9-4666d15c8d87") + (uuid "3721cbf7-b023-4556-af6e-a33229023671") ) (segment - (start 126.6 114.7) - (end 122.1 119.2) + (start 134.705 83.46) + (end 134.705 83.625685) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "37c13c47-77f7-4c7a-864a-173b91fe5566") + (uuid "3a4a3971-e39d-4891-943f-33bed6b1749c") ) (segment - (start 130.036134 136.1) - (end 143.0155 149.079366) + (start 124 136.1) + (end 130.036134 136.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "44d3dc96-1810-488e-a19a-a1a913e4ed4e") + (uuid "4142f9e3-9798-4817-b6a4-ba4b85dd1658") ) (segment - (start 143.0155 149.079366) - (end 143.0155 149.920634) + (start 130.5 87.5) + (end 129.6 88.4) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "5a9f0391-f6e5-471c-9685-8689d4105df8") + (uuid "42099691-3d2c-4110-a1f9-5d4659cebda4") ) (segment - (start 142.136134 150.8) - (end 125.3 150.8) + (start 131.25 86.75) + (end 130.851471 86.75) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "5d349dd4-16a5-4cae-a77c-ef0b8c3d1fc1") + (uuid "61a928b6-8ef7-4dee-b01b-0cdd93ffdef2") ) (segment - (start 136.095 82.41) - (end 136.095 82.505) + (start 125.3 150.8) + (end 124 149.5) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "67b436d4-de2c-42f0-bedb-e8c83e82c253") + ) + (segment + (start 129.6 88.4) + (end 129.6 100.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "620641de-6597-49da-a6c9-dd17a9b35f74") + (uuid "6cfe9293-bce5-4a55-ba6a-b2e0bd7b6175") ) (segment (start 136.095 82.505) @@ -31297,39 +31947,47 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "6672ffb3-c780-43c4-a014-4b8c0f5b7c2b") + (uuid "6f87fe2a-18b5-453b-9e97-955513a0dd46") ) (segment - (start 143.0155 149.920634) - (end 142.136134 150.8) + (start 142.136134 150.8) + (end 125.3 150.8) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "68716f8f-9c29-4b08-aa5d-ceb5b3e20cd6") + (uuid "7280cb2c-9900-4f8e-bdf1-4a2dcd781215") ) (segment - (start 129.6 87.5) - (end 129.6 100.7) + (start 122.1 119.2) + (end 122.1 134.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "6db908b8-6ac9-4597-b4b0-1900fecf5948") + (uuid "78a37cd7-acb3-49b9-8585-ba4a3a4e68c1") ) (segment - (start 125.3 150.8) - (end 124 149.5) + (start 131.524265 86.475735) + (end 131.25 86.75) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "8160ff29-1f78-4d89-a67e-8915d15b5d0d") + (uuid "7e0735ca-141a-40c7-8184-db83c247ce25") ) (segment - (start 135.575 83.025) - (end 135.575 83.46) + (start 131.657108 86.277207) + (end 131.524265 86.41005) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "832ab8a4-bd4b-4366-858c-875f04e3a2b3") + ) + (segment + (start 131.657108 86.211522) + (end 131.657108 86.277207) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "83931b74-5576-4b4c-91ad-49a3a5e0f705") + (uuid "837a59e5-475a-4c1b-aa50-ef96aa653113") ) (segment (start 135.575 83.46) @@ -31337,39 +31995,87 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "8bd6e77e-2d1a-4d5f-a3de-d58349928d52") + (uuid "83831d83-cb9e-4cd4-919f-c9214f9076a3") ) (segment - (start 122.1 134.2) - (end 124 136.1) + (start 134.470685 83.86) + (end 134.008628 83.86) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "9085d62d-081a-4d6c-a2ab-5ff5bb82c7d2") + (uuid "8cd051b9-05d1-44e1-8c12-3d2f81a7b993") ) (segment - (start 129.6 100.7) - (end 126.6 103.7) + (start 143.0155 149.079366) + (end 143.0155 149.920634) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "c12f357e-a427-4582-8da2-c012b34edd8f") + (uuid "8fe668b8-b0ff-49f2-9fd5-68acb8dda152") ) (segment - (start 124 136.1) - (end 130.036134 136.1) + (start 134.008628 83.86) + (end 131.657108 86.211522) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "980c5316-60fa-40ad-a9f1-220177add52d") + ) + (segment + (start 131.524265 86.41005) + (end 131.524265 86.475735) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "9d9f7ecf-539a-49e1-bb45-d2a1a41070d1") + ) + (segment + (start 126.6 103.7) + (end 126.6 114.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_MOSI") - (uuid "fa2ac4a1-10b9-4045-b74f-ed201cbd4958") + (uuid "a1c6ea98-a642-43aa-b62b-923878c31a0d") ) (segment - (start 133.605 85.192059) - (end 133.605 85.195) + (start 130.851471 86.75) + (end 130.5 87.101471) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "aba20d55-ac50-4385-be4d-b47cdeb3730c") + ) + (segment + (start 130.036134 136.1) + (end 143.0155 149.079366) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "ba00bf63-a9a7-45ff-a5d9-86f2e488fd35") + ) + (segment + (start 136.095 82.41) + (end 136.095 82.505) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "d5e46657-80ad-4fa0-ba39-4ce152e8963c") + ) + (segment + (start 143.0155 149.920634) + (end 142.136134 150.8) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_MOSI") + (uuid "fa67ade3-8fa0-46d3-a4d1-5d4eb10d1cf4") + ) + (segment + (start 138.4 122.463866) + (end 139.668067 123.731933) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "1673fa99-ab98-41df-b8e1-0d717595d889") + (uuid "14a27188-8007-4baf-bdac-e446d5971a8a") ) (segment (start 134.552108 88.072207) @@ -31377,95 +32083,103 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "1c5ac135-b097-467e-9431-70f3a6e1c5be") + (uuid "16bfa47c-9af0-461f-9791-5e7ffa9e1166") ) (segment - (start 136.072055 84.660001) - (end 135.367741 84.66) + (start 139.035 83.525686) + (end 138.060685 84.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "32f56772-bf8b-4d3c-acc2-e548bce31af9") + (uuid "3ca415a4-1547-440b-b529-1585953228bb") ) (segment - (start 139.035 83.46) - (end 139.035 83.525686) + (start 134.552107 88.072208) + (end 135.0799 88.6) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "366737a2-a839-4835-939d-732c8f9b1ed1") + (uuid "3e659944-ffe6-4f63-a1a1-4cbbf70a4f7a") ) (segment - (start 133.737059 85.06) - (end 133.605 85.192059) + (start 134.96774 85.06) + (end 134.54 85.06) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "3ab3dfa9-2e40-4cfd-94bb-7371f4d4e593") + (uuid "4591cc6a-9510-44e3-acc7-56f85bb75c73") ) (segment - (start 133.605 85.195) - (end 132.63995 86.16005) + (start 136.072055 84.660001) + (end 135.367741 84.66) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "3dabdb4c-dca4-421c-be8d-9a2d96430ec6") + (uuid "45ebade0-2e4e-4acd-8206-8b8550b64644") ) (segment - (start 138.4 122.463866) - (end 139.668067 123.731933) + (start 135.0799 88.6) + (end 135.748529 88.6) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "467c1992-c8a4-485e-80f3-baa01663aff2") + (uuid "4fd6efa0-52b5-4530-9283-74831486c4c3") ) (segment - (start 139.905 83.46) - (end 139.035 83.46) + (start 136.074265 88.274265) + (end 138.4 90.6) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "4be2f23d-a686-43c3-929d-46ee8decf6a0") + (uuid "626a8080-13d0-49ad-8aac-78bf607902c4") ) (segment - (start 136.074265 88.274265) - (end 138.4 90.6) + (start 139.905 82.41) + (end 139.905 83.46) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "760a4bec-b9b9-40d2-b648-bf3ff9bef7d9") + (uuid "63d37e69-2e15-4254-9236-ce9b37123f5e") ) (segment - (start 135.0799 88.6) - (end 135.748529 88.6) + (start 138.4 90.6) + (end 138.4 122.463866) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "816fdf83-707a-427d-a607-fdecf11cbce2") + (uuid "66abeeb3-1ef0-4eb7-bd21-bbd5cc2cb1a9") ) (segment - (start 132.63995 86.16005) + (start 133.3 86.820099) (end 134.552108 88.072207) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "848e7ecd-39e8-4c67-8a67-b9b44667c4cb") + (uuid "70db8a9b-e6a1-475b-87a3-d3f92d64ff1e") ) (segment - (start 139.035 83.525686) - (end 138.060685 84.5) + (start 139.905 83.46) + (end 139.035 83.46) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "873f31e6-05cf-4b69-bb2c-ebc1d5c8118c") + (uuid "8b5b163c-a840-4629-b57d-c0ff990e3319") ) (segment - (start 138.4 90.6) - (end 138.4 122.463866) + (start 134.54 85.06) + (end 133.605 85.995) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/XBEE_ON_SLEEP") + (uuid "8c9203db-d84d-49c4-9451-33d9767feaf4") + ) + (segment + (start 136.232056 84.5) + (end 136.072055 84.660001) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "a92d8285-5549-4aab-866c-7030b802b4e8") + (uuid "9feef41f-aa40-4754-8b9d-4d9e8ea0d79d") ) (segment (start 128 140.2) @@ -31476,60 +32190,60 @@ (uuid "b4003032-6ef6-4dd3-9619-f3b49ee0710f") ) (segment - (start 135.748529 88.6) - (end 136.074265 88.274265) + (start 138.060685 84.5) + (end 136.232056 84.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "b8e0872b-0a39-42c8-8ad5-9d4cc163d586") + (uuid "c3f48ff5-3600-4c2a-8a84-049337b5370b") ) (segment - (start 139.905 82.41) - (end 139.905 83.46) + (start 135.748529 88.6) + (end 136.074265 88.274265) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "be7f550e-1bf2-4306-b37c-f349d57716cb") + (uuid "cae3a350-5d15-437f-9346-e3d0c4df0aba") ) (segment - (start 135.367741 84.66) - (end 134.96774 85.06) + (start 139.035 83.46) + (end 139.035 83.525686) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "c489542e-a6cd-4265-a8ee-5323f1a405f1") + (uuid "caff4698-534a-49f6-8b3a-f4865dfbe890") ) (segment - (start 136.232056 84.5) - (end 136.072055 84.660001) + (start 133.605 86.095) + (end 133.3 86.4) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "cd14817f-a127-4551-bf1e-1569bfeeb86e") + (uuid "d9e20ae4-e1e1-4c14-9724-d56b9cbcc318") ) (segment - (start 134.96774 85.06) - (end 133.737059 85.06) + (start 135.367741 84.66) + (end 134.96774 85.06) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "e1882e99-2721-41de-b4ca-b0e9587b97a4") + (uuid "e10e0da2-094c-45b4-b214-267efae518d2") ) (segment - (start 138.060685 84.5) - (end 136.232056 84.5) + (start 133.3 86.4) + (end 133.3 86.820099) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "eb6d79a9-cb59-4333-9bdd-2aadd34b7509") + (uuid "e275c30b-038f-4e40-a407-af355d41dc7b") ) (segment - (start 134.552107 88.072208) - (end 135.0799 88.6) + (start 133.605 85.995) + (end 133.605 86.095) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBEE_ON_SLEEP") - (uuid "eefbba9f-d6bf-4d8d-988a-e992aad28dc9") + (uuid "e669b61a-3e09-44f6-9599-9803c2c31439") ) (via (at 128 140.2) @@ -31596,108 +32310,108 @@ (uuid "fd1860f0-d7b7-4ba8-b1a1-876853b4ee96") ) (segment - (start 135.90637 84.26) - (end 135.202055 84.26) + (start 132.457108 86.542893) + (end 137.446917 91.532703) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "2a6df484-779c-41fc-a261-b938c0cace45") + (uuid "0528b7b4-e9c8-438c-b859-c0b067a03087") ) (segment - (start 137.446917 91.532703) - (end 137.446917 117.653083) + (start 134.802055 84.66) + (end 134.34 84.66) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "6a28494f-0b45-47b1-8d0d-e9a918de45f2") + (uuid "07ee26a0-7a18-4101-805c-89dd41f9fd40") ) (segment - (start 134.802055 84.66) - (end 133.571373 84.66) + (start 136.4 118.7) + (end 136.4 125.6) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "6a5c4acf-0a01-4af3-beb8-62b7cf29dd1f") + (uuid "0e7e5dcf-bbe6-4e90-afc1-5bc7b89b5489") ) (segment - (start 138.635 83.36) - (end 137.895 84.1) + (start 137.895 84.1) + (end 136.066371 84.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "76a90522-e71e-47d1-8c65-7d5f5b381c45") + (uuid "12eb5887-5aba-4179-b3bf-bec1c614cf82") ) (segment - (start 132.072794 86.158579) - (end 137.446917 91.532703) + (start 134.34 84.66) + (end 132.457108 86.542893) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "876f39d1-ec45-4150-9785-7dac98bda9ba") + (uuid "203e3864-6970-413d-a0d2-f4f1d6ee842c") ) (segment - (start 134.7 145.5) - (end 134.7 148.2) + (start 137.446917 91.532703) + (end 137.446917 117.653083) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "8e4732e2-ede5-4f32-97c6-c0e0ce7e938c") + (uuid "32dc82c5-640e-429b-8c83-b483d6076ae3") ) (segment - (start 134.7 148.2) - (end 136 149.5) + (start 136.066371 84.1) + (end 135.90637 84.26) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "9d612863-5be8-47c4-a098-3760e1b6b251") + (uuid "404b5292-fa57-4648-9db1-ce8985503771") ) (segment - (start 135.202055 84.26) - (end 134.802055 84.66) + (start 138.635 83.36) + (end 137.895 84.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "a1240c42-e815-4eec-8cb7-cc4e3cdd451d") + (uuid "59597561-a5a0-4f29-b593-036eed8e8657") ) (segment - (start 137.446917 117.653083) - (end 136.4 118.7) + (start 134.7 145.5) + (end 134.7 148.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "a667ddbf-6d7f-45ff-8c8d-3f74abaec1b3") + (uuid "8e4732e2-ede5-4f32-97c6-c0e0ce7e938c") ) (segment - (start 136.066371 84.1) - (end 135.90637 84.26) + (start 134.7 148.2) + (end 136 149.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "bd7bd37f-e57b-4bd3-96ed-d08aa1d6e057") + (uuid "9d612863-5be8-47c4-a098-3760e1b6b251") ) (segment - (start 137.895 84.1) - (end 136.066371 84.1) + (start 137.446917 117.653083) + (end 136.4 118.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "c2872560-7e00-4eee-95f8-3dccac6ae1bc") + (uuid "af71fe4a-1756-4b09-8d0e-e043d6044e3c") ) (segment - (start 133.571373 84.66) - (end 132.072794 86.158579) + (start 135.202055 84.26) + (end 134.802055 84.66) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "ca4d529d-3961-4e92-b754-d4ee220eb472") + (uuid "bc249948-ec4a-4491-a3a7-2e0dbb1a5c51") ) (segment - (start 136.4 118.7) - (end 136.4 125.6) + (start 135.90637 84.26) + (end 135.202055 84.26) (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "d7589c41-db9d-4b77-b56f-f7053cdd6c83") + (uuid "c60c7159-2556-40c5-9ed6-23878eeacf9b") ) (segment (start 138.635 82.41) @@ -31705,7 +32419,7 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "fb9dde8b-3e0f-4db9-ada1-57a594dceacc") + (uuid "f328b4a5-bb59-4401-9e3a-dd4e3d5c6128") ) (segment (start 136.4 125.6) @@ -31713,7 +32427,7 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/XBee_CS") - (uuid "ff43c229-dbeb-46b4-8d5d-1e697e82f5da") + (uuid "f538a175-71be-466c-a3ab-e119cbe4df91") ) (via (at 134.7 145.5) @@ -31772,36 +32486,60 @@ (uuid "fe7e12be-9a5a-4231-9080-f4351b9155cf") ) (segment - (start 121.6 118.8) - (end 126.1 114.3) + (start 135.3 146.8) + (end 135.3 141.929552) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "1bf7c756-717b-49c7-8b31-59d2d7409aa8") + (uuid "0614ce27-5a72-46dc-8cce-cea3456300b3") ) (segment - (start 129.870448 136.5) - (end 123.8 136.5) + (start 126.1 103.1) + (end 129.2 100) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_SCK") + (uuid "139e5498-92c4-487b-be80-cd2fe1e2c92d") + ) + (segment + (start 126.1 114.3) + (end 126.1 103.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "2950ac6e-4fb5-4eb9-8171-1f6fea369ba0") + (uuid "158b42a6-a342-4cd6-a06b-7ca849ba593a") ) (segment - (start 133.04 83.46) + (start 133.84 83.46) (end 134.305 83.46) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "3be0e34a-7418-4394-a4c9-cfad30fd7c68") + (uuid "164c3c66-44de-47fc-bb85-79e525f99565") ) (segment - (start 123.8 136.5) - (end 121.6 134.3) + (start 130.1 87.2) + (end 130.1 86.935785) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_SCK") + (uuid "3f44cf55-d0a1-41c4-ba71-309ed184570f") + ) + (segment + (start 130.1 86.935785) + (end 130.685786 86.35) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_SCK") + (uuid "3f4d110a-b601-4e35-9676-f486861f2604") + ) + (segment + (start 134.305 82.41) + (end 134.825 82.41) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "454ff252-9693-47eb-a55c-888cc6da3f59") + (uuid "583b99df-45b0-4773-8362-11a5922040b9") ) (segment (start 134.305 83.46) @@ -31809,39 +32547,47 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "544a7d74-7ff6-4eb7-9aae-342884006d3b") + (uuid "5c95dd39-cc58-414a-83c1-f818bd635ee1") ) (segment (start 129.2 100) - (end 129.2 87.3) + (end 129.2 88.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "6a09c847-9ec1-407f-80aa-0e8e4067ee9e") + (uuid "6232149b-7117-4c77-af31-df2ef6748c48") ) (segment - (start 126.1 114.3) - (end 126.1 103.1) + (start 123.8 136.5) + (end 121.6 134.3) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "84174c5b-0c81-4eb9-b34b-28f818842e7a") + (uuid "6f76bb28-11ed-48a0-a15a-c7d72dba2878") ) (segment - (start 129.2 87.3) - (end 133.04 83.46) + (start 135.3 141.929552) + (end 129.870448 136.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "a3b9579f-13b5-49ab-8602-7b3fe268d156") + (uuid "711d6250-6465-476f-943c-3531e98809ee") ) (segment - (start 126.1 103.1) - (end 129.2 100) + (start 129.870448 136.5) + (end 123.8 136.5) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "a624aac7-2e81-4768-9ad2-6a762cfdb08c") + (uuid "8aeee8a6-af9f-41e0-bc3f-f4f3888905c7") + ) + (segment + (start 121.6 134.3) + (end 121.6 118.8) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/SPI_SCK") + (uuid "8b484edc-02fc-432d-b2cb-ed135c2836c2") ) (segment (start 138 149.5) @@ -31849,39 +32595,39 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "acd029a6-d0b5-4b16-9ebc-4b4759dee2bf") + (uuid "a0998c1a-2a1a-459b-928e-0cf85aa47f82") ) (segment - (start 135.3 146.8) - (end 135.3 141.929552) + (start 130.95 86.35) + (end 133.84 83.46) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "c3c5a4b9-2c9f-49c4-9f28-90d12e5629a6") + (uuid "e2dfe12c-0e70-4eea-b9be-5309ee38e184") ) (segment - (start 135.3 141.929552) - (end 129.870448 136.5) + (start 130.685786 86.35) + (end 130.95 86.35) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "c725998e-2f3d-4c5f-8cdd-4669600e27e0") + (uuid "e6f0f163-9aed-46d1-bb6e-ffb4e3601999") ) (segment - (start 134.305 82.41) - (end 134.825 82.41) + (start 121.6 118.8) + (end 126.1 114.3) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "ccdae39d-6322-481f-ae6c-e171a01ace7d") + (uuid "efd32fce-1663-4fda-aea5-6ec6ddc9b4a2") ) (segment - (start 121.6 134.3) - (end 121.6 118.8) + (start 129.2 88.1) + (end 130.1 87.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/SPI_SCK") - (uuid "cd13697d-1c87-42b2-9a7b-eb1af92d1760") + (uuid "f626663f-95f4-4fb5-a1f9-bc0736f644e9") ) (segment (start 122.9845 127.079366) @@ -32012,76 +32758,84 @@ (uuid "b7c35521-80e5-408c-81d8-ca463357491c") ) (segment - (start 128.4 97.931091) - (end 126.3 100.031091) + (start 123.2845 132.4845) + (end 123.1845 132.4845) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "002c943f-63b5-4c54-8019-d3a38472f36f") + (uuid "1db62438-fe4f-44a7-a152-00d4d6608c08") ) (segment - (start 131.55 79.45) - (end 128.4 82.6) + (start 127.4 146.1) + (end 127.4 136.6) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "09e26ecd-f0f9-4a17-98f5-75fba17830b3") + (uuid "23ff3457-2279-4be0-b9a4-87398a5a3aa7") ) (segment - (start 131.25 73.9) - (end 131.55 74.2) + (start 126.3 100.031091) + (end 126.3 100.3) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "1caae048-e24d-4a0f-87c3-7ffcd2277372") + (uuid "3027c504-70cf-4f48-b5fc-bf5b10942ad8") ) (segment - (start 123.2845 132.4845) - (end 123.1845 132.4845) + (start 130.6 80.4) + (end 128.4 82.6) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "1db62438-fe4f-44a7-a152-00d4d6608c08") + (uuid "323b9c86-7b25-4f5b-a649-e1e5959ba3f6") ) (segment - (start 127.4 146.1) - (end 127.4 136.6) + (start 128.4 82.6) + (end 128.4 97.931091) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "23ff3457-2279-4be0-b9a4-87398a5a3aa7") + (uuid "384caa44-db6e-4169-877c-25373ee8701d") ) (segment - (start 131.55 74.2) - (end 131.55 79.45) + (start 128.4 97.931091) + (end 126.3 100.031091) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "4ac918cb-6df2-4da1-9943-52954ab94cd1") + (uuid "43e8532d-de58-4584-92b7-7c8515fde576") ) (segment - (start 126.3 100.3) - (end 128.574265 102.574265) + (start 130.6 79.1) + (end 130.6 80.4) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "4b98fe35-5fad-48b6-9879-5dadcadbe09b") + (uuid "53c941f1-bc07-44d8-a437-6c0d65145c1a") ) (segment - (start 128.4 82.6) - (end 128.4 97.931091) + (start 131.25 73.9) + (end 131.55 74.2) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "6ce58fae-6cd4-4f56-8652-7c8c8d6fe42e") + (uuid "64213157-ced0-4a3f-a345-6760570f0219") ) (segment - (start 126.3 100.031091) - (end 126.3 100.3) + (start 126.3 100.3) + (end 128.574265 102.574265) + (width 0.2) + (layer "B.Cu") + (net "/XBee/XBEE_SPI_ATTN") + (uuid "8e50d80e-18ef-41e3-9276-2b2959182aa3") + ) + (segment + (start 131.55 78.15) + (end 130.6 79.1) (width 0.2) (layer "B.Cu") (net "/XBee/XBEE_SPI_ATTN") - (uuid "9b1e5d7b-6da2-4fa9-8e0c-9bb13208326b") + (uuid "9d55b196-579b-4123-b7a1-afdddd97c7eb") ) (segment (start 136.55 146.05) @@ -32099,6 +32853,14 @@ (net "/XBee/XBEE_SPI_ATTN") (uuid "c83e2f58-7c42-4ccb-ae71-dc7a1b6ec697") ) + (segment + (start 131.55 74.2) + (end 131.55 78.15) + (width 0.2) + (layer "B.Cu") + (net "/XBee/XBEE_SPI_ATTN") + (uuid "f0ca7b63-4a1c-4d8a-9cf7-bcfe03820c7d") + ) (segment (start 136.5 146.1) (end 127.4 146.1) @@ -32171,6 +32933,262 @@ (net "/Buttons_Direct/BTN_MACRO2") (uuid "794b93b3-115b-4a6c-a599-086ef12a830a") ) + (segment + (start 124.875 61.75) + (end 124.575 61.45) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "0506a56f-6a5c-4d44-a151-43caf80be15d") + ) + (segment + (start 124.875 62.65) + (end 125.435 63.21) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "076c1fdc-7cc3-4672-834b-7350cea2d21e") + ) + (segment + (start 127.751471 77.1) + (end 128.1 77.1) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "0ed2925c-9d52-4086-a668-331c471d2f98") + ) + (segment + (start 126.851471 76.748529) + (end 127.4 76.748529) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "2962117e-c3e7-4de4-88cd-9906e2a4f96f") + ) + (segment + (start 152.575 62.65) + (end 152.575 61.75) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "2d3470a9-25b1-4efe-b231-316fbafa4579") + ) + (segment + (start 128.35 77.35) + (end 129.25 77.35) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "33573b39-4629-475b-a6e1-5518501cbdd9") + ) + (segment + (start 125.435 63.21) + (end 149.565 63.21) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "409b8001-f5d2-41e2-a64a-01154cfc8ce8") + ) + (segment + (start 127.4 76.748529) + (end 127.751471 77.1) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "4d5ff24f-5258-4bdf-bb7e-3eb8bcc8448e") + ) + (segment + (start 152.275 61.45) + (end 150.425 61.45) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "61ea3f52-8c91-4f34-87c9-a90c9a31136e") + ) + (segment + (start 124.875 62.65) + (end 124.875 61.75) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "6c855859-f6cc-49bd-a4f5-46762a16fb04") + ) + (segment + (start 126.7 76.9) + (end 126.851471 76.748529) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "6ec147d4-99be-4ab4-b943-416af6403499") + ) + (segment + (start 149.565 63.21) + (end 150.125 62.65) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "6f9329e1-12d7-4594-ade7-0c2c44cd7a87") + ) + (segment + (start 124.575 61.45) + (end 122.725 61.45) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "842e4ad4-672e-4758-b1e1-88db9b2370b5") + ) + (segment + (start 150.425 61.45) + (end 150.125 61.75) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "883109f8-6852-4fcf-a07f-d0612921f82c") + ) + (segment + (start 150.125 61.75) + (end 150.125 62.65) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "8ff1692c-c6e4-4431-9936-2fe0fc43ed5d") + ) + (segment + (start 121.7 63.3) + (end 121.7 64.1) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "b1db6254-8e94-4c53-90e8-0224c42db6a0") + ) + (segment + (start 122.35 62.65) + (end 121.7 63.3) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "b930d36a-e7ca-4ab3-b2e5-6a93da3530fd") + ) + (segment + (start 122.425 61.75) + (end 122.425 62.65) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "cdf2072d-aa6a-40f5-bdbe-1cc62659160b") + ) + (segment + (start 128.1 77.1) + (end 128.35 77.35) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "d77a6710-93fc-451e-a2eb-dde5b5f3cadc") + ) + (segment + (start 122.725 61.45) + (end 122.425 61.75) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "db36fd1c-2cc4-4569-981a-c56279c78806") + ) + (segment + (start 152.575 61.75) + (end 152.275 61.45) + (width 0.2) + (layer "F.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "f195f2cd-d1dc-43a4-a67d-1d1d7522462a") + ) + (via + (at 126.7 76.9) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "3fb63d8e-465a-4dbb-9a14-5588b7059fae") + ) + (via + (at 121.7 64.1) + (size 0.6) + (drill 0.3) + (layers "F.Cu" "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "6fba5f16-7673-4acf-b0f1-c5805d01540a") + ) + (segment + (start 121.7 64.1) + (end 122.8 65.2) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "13600a6a-b877-48d6-b335-a2f69a7067e1") + ) + (segment + (start 126.9 74.3) + (end 127.2 74.6) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "1544c4fe-61b6-4eb7-8f47-ba5eab079f1c") + ) + (segment + (start 122.8 65.2) + (end 124.7 65.2) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "34638114-17ab-4a48-9876-dfe69ae1f049") + ) + (segment + (start 127.2 74.6) + (end 127.2 75.734314) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "60517c23-22fc-408f-9f39-c7ddcb7dc4d0") + ) + (segment + (start 126.958949 75.975365) + (end 126.958949 76.641051) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "9daab31e-40df-4aed-ba6e-a44bb5d5cff2") + ) + (segment + (start 126.958949 76.641051) + (end 126.7 76.9) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "b37ef52c-6f45-41d5-a467-aeb13ace2ecd") + ) + (segment + (start 126.9 67.4) + (end 126.9 74.3) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "c0d6c164-c59f-4b31-a473-eb754e147ccc") + ) + (segment + (start 127.2 75.734314) + (end 126.958949 75.975365) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "d145b100-17b2-4fa1-b340-250d48470936") + ) + (segment + (start 124.7 65.2) + (end 126.9 67.4) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_TRIG_DIG") + (uuid "e74ff0eb-57e7-48fd-9b69-d01d44365b13") + ) (segment (start 135 119.15) (end 135.248529 119.15) @@ -32868,28 +33886,12 @@ (uuid "ff3ed7c8-c823-4fae-965e-03a5c03f510b") ) (segment - (start 128.61 79.89) - (end 129.25 79.89) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "08f951ea-8817-4f3a-9225-bb66c302c379") - ) - (segment - (start 121.251471 111.4) - (end 121.5 111.4) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "0bba5e04-0222-46b9-9d3b-0b29f8faac16") - ) - (segment - (start 125.940812 100.756904) - (end 125.940812 88.059188) + (start 126.5 152) + (end 123 152) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "0ee69e3c-36de-4248-ad2f-1d8f8d48118c") + (uuid "12dfae1e-fd7a-41d8-8b9d-852b0f7ba5f5") ) (segment (start 123.411358 107.437171) @@ -32897,47 +33899,39 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "18969461-8269-447a-ae14-0d447a1b7664") - ) - (segment - (start 121.5 111.4) - (end 121.5 109.348529) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "1a5f339a-6b33-4a94-b439-f4f10240ad80") + (uuid "40667732-79b3-4da6-8123-fc9bedc2591f") ) (segment - (start 127.75 153.25) - (end 126.5 152) + (start 127.4 81.1) + (end 128.61 79.89) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "23bee2f5-744d-4eba-8cf4-2929950a8a1d") + (uuid "4073477f-63a3-468d-8f91-6a71fa8494eb") ) (segment - (start 125.940812 88.059188) - (end 127.4 86.6) + (start 121.251471 111.4) + (end 121.5 111.4) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "3654bdc9-cd75-4374-8a68-1403a03eea6e") + (uuid "546b8155-f8f1-4256-8614-fbeb7231d7b9") ) (segment - (start 120.8 149.8) - (end 120.8 112.6) + (start 120.9 112.248529) + (end 120.9 111.751471) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "41fdd9d1-4865-427c-9715-ffd6b4e454d9") + (uuid "5a2730f2-0c98-46d6-a83e-332de6ee7507") ) (segment - (start 123.411358 103.286358) - (end 125.940812 100.756904) + (start 121.5 111.4) + (end 121.5 109.348529) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "44a89225-4764-4374-afba-e5e8da9842c8") + (uuid "615e7fc8-e6c4-4547-8110-395ab5df0c94") ) (segment (start 121.251471 112.6) @@ -32945,23 +33939,7 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "5fa799f2-03ee-4273-a435-841fed2a2929") - ) - (segment - (start 127.4 86.6) - (end 127.4 81.1) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "8c9f4c18-a7e8-4c14-b197-f54ca72616f3") - ) - (segment - (start 121.5 109.348529) - (end 123.411358 107.437171) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "96aea554-33de-4534-acb4-737c44da9184") + (uuid "80bcf0d5-fb06-43c7-b16d-32bb39168c57") ) (segment (start 123 152) @@ -32969,23 +33947,15 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "9b42f410-8b96-42f5-a9e4-67b63784a7cd") + (uuid "84ea1075-98ec-4031-b273-7bd89eb42049") ) (segment - (start 120.9 112.248529) - (end 120.9 111.751471) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/USB_DM_MCU") - (uuid "a17ad4cb-2a27-48a6-b68a-eba45096d1a6") - ) - (segment - (start 127.4 81.1) - (end 128.61 79.89) + (start 128.61 79.89) + (end 129.25 79.89) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "a977a9bf-da41-4c2c-b86d-fc7958a9f804") + (uuid "9ee7794a-6032-4d9a-9bb0-73ef6f1d2c1a") ) (segment (start 120.8 112.6) @@ -32993,15 +33963,15 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "b4d876e1-7ab7-449c-a57d-47a9337c6288") + (uuid "a81e8ac6-60f8-4d92-bda0-7d399ae0e15a") ) (segment - (start 126.5 152) - (end 123 152) + (start 121.5 109.348529) + (end 123.411358 107.437171) (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "d6c9ecb7-842d-4a5b-a0ef-ae8604af3fe0") + (uuid "b2c9b4ca-8f6d-4f36-b0ec-368757605c97") ) (segment (start 120.9 111.751471) @@ -33009,266 +33979,90 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/USB_DM_MCU") - (uuid "d8adfb96-7a33-484b-9455-c9f4ea8e34e3") - ) - (segment - (start 125.95 62.65) - (end 125.95 61.75) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "0e029017-4973-4423-9f9c-fddf1dca0d56") + (uuid "c9fe03a0-a591-4b20-a0d0-f04c54093c97") ) (segment - (start 127.4 76.748529) - (end 127.751471 77.1) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "1db5c9ce-28e6-4b3b-b3d0-9085034669fb") - ) - (segment - (start 127.751471 77.1) - (end 128.1 77.1) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "2a03ffd5-8440-4053-8b74-547c1a73342f") - ) - (segment - (start 127.2 76.2) - (end 127.4 76.4) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "3b932df4-3262-4f8a-94cd-41926deff74e") - ) - (segment - (start 128.35 77.35) - (end 129.25 77.35) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "885a974d-09b1-4f41-bc69-ee4e75afba52") - ) - (segment - (start 122.35 62.65) - (end 122 63) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "8a7b6ac0-d780-403c-8f86-2f4db24d5f11") - ) - (segment - (start 123.5 62) - (end 123.5 62.65) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "8d216c2e-5074-418a-86ce-9cc32925886c") - ) - (segment - (start 125.65 61.45) - (end 124.05 61.45) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "8f492f1f-b5d6-46aa-ba6a-760f3c8cebb7") - ) - (segment - (start 125.95 61.75) - (end 125.65 61.45) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "9e67716f-105b-4e83-8362-0f5daa235cf8") - ) - (segment - (start 127.4 76.4) - (end 127.4 76.748529) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "a72bc9f2-13af-4c2c-a3ad-b7563e80a4f5") - ) - (segment - (start 123.5 62.65) - (end 122.35 62.65) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "e862be68-d5d2-4ddd-b903-3c56c2aa97ea") - ) - (segment - (start 127.2 75) - (end 127.2 76.2) - (width 0.2) - (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "eb77c841-5a96-4c91-b05f-01bac8b002e3") - ) - (segment - (start 124.05 61.45) - (end 123.5 62) + (start 127.75 153.25) + (end 126.5 152) (width 0.2) (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "f3fa582c-c763-4095-8f41-d5ca1d9d7f29") + (net "/MCU_Core/USB_DM_MCU") + (uuid "d5564efc-0a5e-41cb-969c-47f7d756645f") ) (segment - (start 128.1 77.1) - (end 128.35 77.35) + (start 120.8 149.8) + (end 120.8 112.6) (width 0.2) (layer "F.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "ff9864b5-2b5c-4d8b-9a16-2755b8ea68f4") - ) - (via - (at 127.2 75) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "3fb63d8e-465a-4dbb-9a14-5588b7059fae") - ) - (via - (at 122 63) - (size 0.6) - (drill 0.3) - (layers "F.Cu" "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "6fba5f16-7673-4acf-b0f1-c5805d01540a") - ) - (segment - (start 122.5 72.5) - (end 122.5 63.5) - (width 0.2) - (layer "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "00669f4c-273a-43c1-8429-d730e4c40601") - ) - (segment - (start 125 75) - (end 122.5 72.5) - (width 0.2) - (layer "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "39dac41c-7bb0-486e-af3d-90542c84b51a") - ) - (segment - (start 122.5 63.5) - (end 122 63) - (width 0.2) - (layer "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "8970df6f-44bf-4cfd-a39c-bf2f664aca13") - ) - (segment - (start 127.2 75) - (end 125 75) - (width 0.2) - (layer "B.Cu") - (net "/Buttons_Direct/BTN_TRIG_DIG") - (uuid "bc380e86-1279-41d3-be7d-c380bebb0fad") + (net "/MCU_Core/USB_DM_MCU") + (uuid "e1a337e0-400a-4835-a230-5c87241db5fc") ) (segment - (start 126.6 75.6) - (end 126 75) + (start 127.4 99.297716) + (end 127.4 81.1) (width 0.2) (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "1f0a0e6a-8acf-4c60-900d-55847fbf37dd") + (net "/MCU_Core/USB_DM_MCU") + (uuid "fce077e6-97b1-4b92-9121-3aa19330fae8") ) (segment - (start 125.9 73.9) - (end 126 74) + (start 123.411358 103.286358) + (end 127.4 99.297716) (width 0.2) (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "265511a2-30a1-4cf7-9222-23730d2b4d4a") + (net "/MCU_Core/USB_DM_MCU") + (uuid "fe9ed402-7d99-4e3b-b3d2-6c1eb318d314") ) (segment - (start 128.72 67.19) + (start 128.3 67.19) (end 129.25 67.19) (width 0.2) (layer "F.Cu") (net "/MCU_Core/MCU_EN") - (uuid "3042d4a8-f5c7-445c-a5d6-2587bc57f554") - ) - (segment - (start 126 75) - (end 126 74) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "4b944104-a073-41af-9474-9bdb60d4b5c1") - ) - (segment - (start 127.2 78.05) - (end 126.6 77.45) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "5e9fc947-9324-4e48-94c9-cb794b3e0518") - ) - (segment - (start 128.2 67.71) - (end 128.72 67.19) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "957a344a-0070-42d3-9c8e-4d125a737675") + (uuid "1cc2b711-8fab-4cef-86a7-e4ee814e3b03") ) (segment - (start 126.6 77.45) - (end 126.6 75.6) + (start 128.09 67.4) + (end 128.3 67.19) (width 0.2) (layer "F.Cu") (net "/MCU_Core/MCU_EN") - (uuid "cacd0fdf-93f4-4df9-b615-bff0aad6122f") + (uuid "53b3ffd7-559f-4412-98a7-03ccf2aa88da") ) (segment - (start 128.2 69.690256) - (end 128.2 67.71) + (start 127.4 67.4) + (end 128.09 67.4) (width 0.2) (layer "F.Cu") (net "/MCU_Core/MCU_EN") - (uuid "dae71b27-fafb-4d33-8109-7024164e124e") + (uuid "d730fbc8-b5bf-4e7f-b868-a5481a56773a") ) (segment - (start 128.2 69.690256) - (end 125.9 71.990256) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "e38f251d-b579-4012-aeed-ce1bf5333f6c") - ) - (segment - (start 125.9 71.990256) - (end 125.9 73.9) + (start 132.58 70.9) + (end 130.14 68.46) (width 0.2) (layer "F.Cu") - (net "/MCU_Core/MCU_EN") - (uuid "fb074a54-3615-447b-b7d9-85d85adbfb9b") + (net "/Hall_Trigger/TRIG_ANALOG") + (uuid "7ca9c8af-f6f5-4f1f-950f-1f1aa0c3ac30") ) (segment - (start 130.8 67.8) - (end 130.14 68.46) + (start 130.14 68.46) + (end 129.25 68.46) (width 0.2) (layer "F.Cu") (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "18a91c50-d827-466e-ad95-fceda5e8c10f") + (uuid "a1bf665e-6209-4081-84f2-ab5b067cda87") ) (segment - (start 130.14 68.46) - (end 129.25 68.46) + (start 133.95 70.9) + (end 132.58 70.9) (width 0.2) (layer "F.Cu") (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "bd42beab-7ac1-4b34-a5ee-092824f5bfc3") + (uuid "b2ca677c-8bc3-43eb-b8d8-9e706a63ff5a") ) (via - (at 130.8 67.8) + (at 133.95 70.9) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -33276,44 +34070,28 @@ (uuid "4ad156d4-fc19-4626-95a8-325ec89d88f1") ) (segment - (start 149.9 63) - (end 148.4 64.5) + (start 134.5 70.9) + (end 135.2 70.2) (width 0.2) (layer "B.Cu") (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "3ad3ee6a-ef8d-4fea-bffa-ccc33dd07755") + (uuid "488e5270-1aac-4cc0-8943-7fb4fef5ccce") ) (segment - (start 150.16 63) - (end 149.9 63) + (start 133.95 70.9) + (end 134.5 70.9) (width 0.2) (layer "B.Cu") (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "5a7e164a-172a-443d-ac97-56a122ee3f17") + (uuid "ad3950ac-bfa5-4f71-b52d-de8361cd4e77") ) (segment - (start 133.21 65.39) - (end 130.8 67.8) + (start 135.2 70.2) + (end 136.9 70.2) (width 0.2) (layer "B.Cu") (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "63466e27-93c1-436a-a53f-22c922b8c535") - ) - (segment - (start 148.4 64.5) - (end 133.21 64.5) - (width 0.2) - (layer "B.Cu") - (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "84478995-7550-4b1a-9010-0e7900fe3d5b") - ) - (segment - (start 133.21 64.5) - (end 133.21 65.39) - (width 0.2) - (layer "B.Cu") - (net "/Hall_Trigger/TRIG_ANALOG") - (uuid "98041083-4d02-4cce-ba32-540d3fd7d822") + (uuid "db16e3ca-7fb9-4180-a1a8-72a52cdbe93e") ) (segment (start 134.399998 77.899995) @@ -33588,164 +34366,132 @@ (uuid "fa42b802-d54d-458a-bb6e-2af08fbdb41d") ) (segment - (start 125.6 85.81) - (end 125.59 85.8) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/VSYS_SENSE") - (uuid "1d7e7002-e0c1-4262-b8e8-e9ee8169b38d") - ) - (segment - (start 126.64 80.04) - (end 123.9 77.3) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/VSYS_SENSE") - (uuid "264d7da4-ee26-4174-91fe-ec0782c5c9d2") - ) - (segment - (start 126.8 82.6) - (end 126.8 80.04) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/VSYS_SENSE") - (uuid "57a7746e-b032-4d7a-b567-8ac560b44265") - ) - (segment - (start 125.59 83.81) - (end 126.8 82.6) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/VSYS_SENSE") - (uuid "9147fa67-266a-489b-b859-ee7a2e3bbe33") - ) - (segment - (start 123.9 77.3) - (end 123.9 71.1) + (start 126.93 72.27) + (end 129.25 72.27) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "c42e2f6a-85de-46ec-b625-6b6f38f34797") + (uuid "36445247-120f-4928-b01d-b715c81f600f") ) (segment - (start 125.6 87) - (end 125.6 85.81) + (start 126.95 84.191051) + (end 126.758949 84) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "c6bbb179-b24e-4979-a7ef-526b0412c492") + (uuid "72c21f81-33e9-410b-b9ae-7190ba95bc12") ) (segment - (start 127.5 71.3) - (end 128.47 72.27) + (start 126.5 87.9) + (end 126.5 89.1) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "d69ffd1d-9ea9-4fc4-bb04-d361055ace99") + (uuid "84b2f384-38d4-4894-9a7f-996f3dc212b5") ) (segment - (start 126.8 80.04) - (end 126.64 80.04) + (start 126.5 87.9) + (end 126.95 87.45) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "e8829ff7-78f2-4f5d-b3fa-9f3d9dda3000") + (uuid "bfe13fcf-7c26-4f38-ba71-24789c0e7e17") ) (segment - (start 128.47 72.27) - (end 129.25 72.27) + (start 126.95 87.45) + (end 126.95 84.191051) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "ea1fd34c-106b-4a9c-b34a-3a6189a408f7") + (uuid "d882556c-bb95-4437-bd17-de4eafe60cad") ) (segment - (start 125.59 85.8) - (end 125.59 83.81) + (start 125.7 73.5) + (end 126.93 72.27) (width 0.2) (layer "F.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "f94a6c31-c559-4449-a76d-590737a71fca") + (uuid "eccdc2fc-de1c-4b91-b21e-fa3bc5e399bc") ) (via - (at 123.9 71.1) + (at 125.7 73.5) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "9c796c72-8ad5-4d1a-80d8-e9ff2ef69318") + (uuid "7c917192-e8fd-4042-885a-0af6552ed56f") ) (via - (at 127.5 71.3) + (at 126.758949 84) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "f8eeb7d7-5e3f-4128-b477-f819575cff0b") + (uuid "d9fff82a-32c8-44c9-8c02-8b371ca91038") ) (segment - (start 127.3 71.1) - (end 127.5 71.3) + (start 125.7 82.941051) + (end 125.7 73.5) (width 0.2) (layer "B.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "6c7d14d8-8ad5-4fb5-88a4-05978a04fecd") + (uuid "ad57e935-da7f-4ec9-8117-62ba3b133924") ) (segment - (start 123.9 71.1) - (end 127.3 71.1) + (start 126.758949 84) + (end 125.7 82.941051) (width 0.2) (layer "B.Cu") (net "/MCU_Core/VSYS_SENSE") - (uuid "abbeca9c-0dd6-4055-a5d4-56758edc0a85") + (uuid "e6ddaffb-71fd-400a-8176-e154d21b1032") ) (segment - (start 122.65 89.275) + (start 125.25 90.5) (end 124.025 89.275) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "00fc0a57-f6ba-492b-9ea9-38bcc212747f") + (uuid "8684b998-bdb5-4366-8d69-8c69320b4ea0") ) (segment - (start 125.15 90.4) - (end 125.25 90.5) + (start 128.69 74.81) + (end 128 75.5) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "697bd22b-4d35-4ea0-b662-7a3a84f5c6ba") + (uuid "9001e8ab-820c-41a3-be09-7ec4df8417c6") ) (segment - (start 125.25 90.5) - (end 124.025 91.725) + (start 129.25 74.81) + (end 128.69 74.81) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "89cc145e-3dcd-4d9e-94d5-78fdbc5c6476") + (uuid "a1e19475-a1eb-4e0e-a88d-69215bd8078e") ) (segment - (start 124.025 89.275) - (end 125.15 90.4) + (start 125.25 90.5) + (end 124.025 91.725) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "8f698cf8-3ed6-42ee-9d1d-a2b88a937530") + (uuid "a7bf7b31-a8a3-46a9-848e-16c46b6a063a") ) (segment - (start 128.69 74.81) - (end 128 75.5) + (start 125.9 90.5) + (end 125.25 90.5) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "9001e8ab-820c-41a3-be09-7ec4df8417c6") + (uuid "b7c94895-4a9e-4058-9606-2eb7542bfba0") ) (segment - (start 129.25 74.81) - (end 128.69 74.81) + (start 124.025 89.275) + (end 122.65 89.275) (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "a1e19475-a1eb-4e0e-a88d-69215bd8078e") + (uuid "c03ee227-c32f-45a3-99fb-f2133746a0dc") ) (segment (start 124.025 91.725) @@ -33753,10 +34499,10 @@ (width 0.2) (layer "F.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "a78cd483-8d68-4dc3-b4b6-d4df5e048100") + (uuid "db129948-e572-4bc5-ac3a-2644eef8cb3b") ) (via - (at 125.25 90.5) + (at 125.9 90.5) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -33772,28 +34518,36 @@ (uuid "87543daf-942b-4031-95a9-7b9bb69906b0") ) (segment - (start 128 75.5) + (start 127.358949 88.391051) (end 127.358949 76.141051) (width 0.2) (layer "B.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "9f10b7b2-088b-4230-bb74-160992e579b6") + (uuid "101c5523-b602-4b2a-bd79-3e69764cf86c") ) (segment (start 127.358949 76.141051) + (end 128 75.5) + (width 0.2) + (layer "B.Cu") + (net "/Buttons_Direct/BTN_THR_UP") + (uuid "1dc47a9a-af3c-46bc-a819-4a1051ebba58") + ) + (segment + (start 125.9 89.85) (end 127.358949 88.391051) (width 0.2) (layer "B.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "b30a4eb8-2e1d-4906-bd92-6ca2523a12dc") + (uuid "a9a3ed06-5ebe-4404-b242-d37e0aa0fbb8") ) (segment - (start 127.358949 88.391051) - (end 125.25 90.5) + (start 125.9 90.5) + (end 125.9 89.85) (width 0.2) (layer "B.Cu") (net "/Buttons_Direct/BTN_THR_UP") - (uuid "cbff9683-504e-4e1e-8c30-8a16d245827f") + (uuid "fcec4400-3aca-45e7-8d52-9784e4e59a14") ) (segment (start 128.42 76.08) @@ -33884,44 +34638,12 @@ (uuid "f4d798a9-38a3-43fc-af00-a4c3be50d0b5") ) (segment - (start 124.9 69.4) - (end 124.5 69) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "001c0e9a-1d5c-472e-b20d-9be505bc0edc") - ) - (segment - (start 125 72.173648) - (end 124.77488 71.948528) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "17adaa4e-2348-4434-8638-832c0b8c6231") - ) - (segment - (start 125 74.8) - (end 125 72.173648) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "1b7a8079-a691-4962-87dd-0308682881aa") - ) - (segment - (start 124.9 69.815552) - (end 124.9 69.4) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "21643226-b649-4c34-bc8c-5e06f162b2ff") - ) - (segment - (start 128.78 78.62) - (end 127.76 79.64) + (start 129.25 78.62) + (end 127.8 78.62) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "22d931a4-a2a7-4a05-adc3-bf0873267abb") + (uuid "2083facc-337b-4621-8ab6-6799f96b2406") ) (segment (start 130.2 78.62) @@ -33932,44 +34654,36 @@ (uuid "247f7927-efd5-4f2d-95c9-e6f3b219d029") ) (segment - (start 129.25 78.62) - (end 128.78 78.62) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "2a5a07a8-9fe5-4d89-bfa2-e5563e100945") - ) - (segment - (start 125.6 78.408924) - (end 125.6 75.4) + (start 130.3 76.5) + (end 130.3 78.52) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "3436ddc3-86e4-4829-a361-fa039ecce44f") + (uuid "7347df70-0cde-4a92-be02-e64fd03c7e0e") ) (segment - (start 125 69.915552) - (end 124.9 69.815552) + (start 127.8 78.62) + (end 127.8 79.809744) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "5beb034f-0874-496e-9aee-b848d829267f") + (uuid "825a264b-c7ce-4d30-9560-2cacb7c743b6") ) (segment - (start 125 71.22635) - (end 125 69.915552) + (start 127.8 79.809744) + (end 125.884744 81.725) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "715798d7-6d6b-482a-9e44-c773c3bba789") + (uuid "867db88a-2cda-46c7-9ad1-2a89f5a50228") ) (segment - (start 130.3 76.5) - (end 130.3 78.52) + (start 123.6 82.384448) + (end 123.6 82.8) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "7347df70-0cde-4a92-be02-e64fd03c7e0e") + (uuid "96002549-3066-470d-8df2-a55a843a2491") ) (segment (start 133.35 76.35) @@ -33980,28 +34694,12 @@ (uuid "984e76ac-d113-4e02-aff9-cef92bb0aca9") ) (segment - (start 124.77488 71.45147) - (end 125 71.22635) + (start 125.884744 81.725) + (end 124.259448 81.725) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "9d20a59c-ce45-4092-8561-910e4e9d37d1") - ) - (segment - (start 127.76 79.64) - (end 126.831076 79.64) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "b6c4017b-e0b6-46d3-89f9-75b63d9ac819") - ) - (segment - (start 124.77488 71.948528) - (end 124.77488 71.45147) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "b6d17647-923c-48ae-96e5-d9db5dc42bcb") + (uuid "a935f3e6-d933-4fab-97d9-a073cf587d95") ) (segment (start 129.25 78.62) @@ -34019,14 +34717,6 @@ (net "/Accelerometer/I2C_SDA") (uuid "c45210ec-05ff-4cb5-b47a-9ad8ac52cddb") ) - (segment - (start 126.831076 79.64) - (end 125.6 78.408924) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SDA") - (uuid "ca1455db-a1d6-4272-94d9-a89a9e78f6d4") - ) (segment (start 130.45 76.35) (end 130.3 76.5) @@ -34036,12 +34726,12 @@ (uuid "e777aa32-28a2-478e-bf22-55e9154cb6a6") ) (segment - (start 125.6 75.4) - (end 125 74.8) + (start 124.259448 81.725) + (end 123.6 82.384448) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SDA") - (uuid "edd3bf71-4dc5-4149-863f-b2b029bcfefa") + (uuid "ed91b522-c7b8-4bd4-b72c-0f5a7719f24d") ) (via (at 133.35 76.35) @@ -34300,180 +34990,140 @@ (uuid "fd8ab17f-ff2b-4cc1-9d21-bb0d0dedeff1") ) (segment - (start 125.5 71.574879) - (end 125.5 69) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "1262bcff-da60-4a93-a022-4e3bdbf1a7e3") - ) - (segment - (start 133.149997 76.95) - (end 133.35 77.150003) + (start 134.075 81.36) + (end 134.075 81.89) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "156bd0a1-d385-4134-9fc6-ed5f617332cb") + (uuid "06e1b186-56e8-46ab-b8f2-8080f89f3fda") ) (segment - (start 133.6 78.677617) - (end 133.6 78.231373) + (start 122.6 79.2) + (end 122.6 82.8) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "2189b65c-d207-464c-8bc1-14711b3043b2") + (uuid "495c088e-e6d5-48f0-b949-cacf56b95c70") ) (segment (start 134.075 81.89) - (end 134.075 81.36) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "28541d3e-e57c-4259-8de3-31bc2716c905") - ) - (segment - (start 133.55 77.350003) - (end 133.35 77.150003) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "5a4a7ba8-4be1-4bb0-a2b4-fd40a5d61828") - ) - (segment - (start 133.555 82.41) - (end 134.075 81.89) + (end 133.555 82.41) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "5c14193d-1432-4d40-a131-de7c46e5e24d") + (uuid "5a224782-c7ed-4710-8ad3-23757b81322f") ) (segment - (start 133.550002 78.181376) - (end 133.55 78.181371) + (start 131.75 77.2) + (end 130.95 77.2) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "5c4fd241-76ae-4e2d-885b-837cf6893879") + (uuid "6a405e20-3a67-49ae-b12a-6ca941595d5d") ) (segment (start 134.2 79.277618) - (end 133.6 78.677617) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "63df087b-b6fc-4a2e-99ee-504ccba136cf") - ) - (segment - (start 130.9 76.95) - (end 133.149997 76.95) + (end 134.2 81.36) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "6ec3b596-0051-44ba-9561-22e5063ae9eb") + (uuid "8442780f-813e-4cfa-9547-731fe3fbff08") ) (segment - (start 125.37488 71.699999) - (end 125.5 71.574879) + (start 133.472383 78.677617) + (end 133.6 78.677617) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "736b8bbf-e7a3-48b7-a364-6473ec1a40e2") + (uuid "abed4d6c-6ad4-41ac-9ea7-9cd3277c91dd") ) (segment - (start 133.6 78.231373) - (end 133.550002 78.181376) + (start 133.35 78.8) + (end 131.75 77.2) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "77b981a6-ac1f-4c6c-acfb-bdf880866cd9") + (uuid "c7d1c2ad-fdb1-4309-8b38-6b97b9629e16") ) (segment (start 134.2 81.36) - (end 134.2 79.277618) + (end 134.075 81.36) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "945f7d4c-a5ee-4333-9fb7-d82e5bce4e95") + (uuid "d911e6fe-d8d9-4f87-ae42-e1ada3bc9bcd") ) (segment - (start 133.549998 77.850004) - (end 133.55 77.850002) + (start 133.6 78.677617) + (end 134.2 79.277618) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "961ac653-c582-4fab-917c-95e54e3304cc") + (uuid "da3a5389-ff68-4d44-8546-85ba67005973") ) (segment - (start 133.55 77.850002) - (end 133.55 77.350003) + (start 127.624265 74.175735) + (end 122.6 79.2) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "d17a0402-a5c8-4ab4-ac5c-206f06ebe83c") + (uuid "ea30b913-7801-412e-b3cb-7bdcea160f69") ) (segment - (start 133.55 78.181371) - (end 133.549998 77.850004) + (start 133.35 78.8) + (end 133.472383 78.677617) (width 0.2) (layer "F.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "f27d976b-e506-4625-974a-3ad68117058c") - ) - (segment - (start 134.075 81.36) - (end 134.2 81.36) - (width 0.2) - (layer "F.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "f43c0998-6e98-461c-83ee-ee88a6d4c146") + (uuid "fe81966b-29af-443e-81b3-8ac486342846") ) (via - (at 125.37488 71.699999) + (at 130.95 77.2) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "a324cf07-0d87-415d-ad37-de060d462b5d") + (uuid "25df7383-9d4f-4f83-a90f-67c295ad50c6") ) (via - (at 133.35 77.150003) + (at 127.624265 74.175735) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "b265e057-c470-4dbf-b596-a9aace32fbe4") + (uuid "a4cfa77c-da26-4c31-9c33-7c9e7047599b") ) (via - (at 130.9 76.95) + (at 133.35 78.8) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "b2a976f8-81b0-48ee-b4ff-f561dd91e37d") + (uuid "b265e057-c470-4dbf-b596-a9aace32fbe4") ) (segment - (start 127 73) - (end 130.9 76.9) + (start 136.6 74.8) + (end 140.4 74.8) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "1654b0d2-e824-481b-9c97-d4d9d0e54f57") + (uuid "1c3f30ab-b07e-4110-b251-6b232d2433f5") ) (segment - (start 141.3 76.4) - (end 141.3 75.7) + (start 133.35 78.8) + (end 133.449997 78.700003) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "1ecb98af-c5b6-4715-bfb9-33554ac069bb") + (uuid "2bfe4e3d-c7a2-4a5d-8125-6fc1e4afcf4e") ) (segment - (start 125.4 73) - (end 127 73) + (start 133.449997 77.150003) + (end 134.6 76) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "2053acf9-622a-4fc6-afb5-ff0d30cc0b5b") + (uuid "4c582bf7-f382-4d1f-928b-1a0da8da6de6") ) (segment (start 135.45 76) @@ -34481,79 +35131,63 @@ (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "2d3fd08f-3261-46b9-8cc5-780142af46db") + (uuid "63cca9ca-ff69-45be-87f2-84f2046d2f4a") ) (segment - (start 134.6 76) - (end 135.45 76) - (width 0.2) - (layer "B.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "315dae99-eefc-4588-863f-cb4eb3669981") - ) - (segment - (start 125.4 73) - (end 125.4 71.725119) - (width 0.2) - (layer "B.Cu") - (net "/Accelerometer/I2C_SCL") - (uuid "4011b1f3-01df-4cdc-9965-3a4ee27dd489") - ) - (segment - (start 125.4 71.725119) - (end 125.37488 71.699999) + (start 133.449997 78.700003) + (end 133.449997 77.150003) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "5041d817-ff9a-42d1-b37d-5cce862a884e") + (uuid "8afba384-c314-44be-a7de-e22a398da6da") ) (segment - (start 135.45 75.95) - (end 136.6 74.8) + (start 141.3 75.7) + (end 141.3 76.4) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "56ecf14b-6b69-4130-94fe-e4e28a41ed46") + (uuid "964dfb02-5c6e-467f-bd1a-4237690833cd") ) (segment - (start 133.449997 77.150003) - (end 134.6 76) + (start 130.95 77.2) + (end 127.925735 74.175735) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "83af08fb-58fa-46b4-90fb-6eb05ef722fe") + (uuid "9842c220-8635-4d6a-a3cd-1dc7876f5e19") ) (segment - (start 141.3 75.7) - (end 140.4 74.8) + (start 127.925735 74.175735) + (end 127.624265 74.175735) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "b6833280-c68d-4183-b46e-012bcbe2522f") + (uuid "b1f98a71-6a21-4f7d-9199-5bd444d250fb") ) (segment - (start 133.35 77.150003) - (end 133.449997 77.150003) + (start 135.45 75.95) + (end 136.6 74.8) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "c564f20c-5b57-4b36-8373-85c665e3bb3e") + (uuid "dcde7f93-e5e8-40a7-80c6-eeeff18037ce") ) (segment - (start 130.9 76.9) - (end 130.9 76.95) + (start 140.4 74.8) + (end 141.3 75.7) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "c5b23916-e421-498f-bd2b-b294bc5fe957") + (uuid "e4963ae0-87a0-4dfd-b97a-fafcecb0aac2") ) (segment - (start 140.4 74.8) - (end 136.6 74.8) + (start 134.6 76) + (end 135.45 76) (width 0.2) (layer "B.Cu") (net "/Accelerometer/I2C_SCL") - (uuid "dd5e6cec-8fc0-4f08-aa10-bcd91658c6e1") + (uuid "ee1f5d4e-5d1a-4d70-a719-f7a8edddbfc0") ) (segment (start 141.325 98.775) @@ -36100,12 +36734,20 @@ (uuid "d0892263-c5e5-45fa-9e0b-b7fd09b77564") ) (segment - (start 149 73.5) - (end 148.4 72.9) + (start 148.4 68.586522) + (end 147.973477 68.16) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "0819966b-2bc8-4c14-8eba-502debfd1234") + (uuid "04e893a3-12d0-4a4d-8ef2-0b422d12f204") + ) + (segment + (start 149.144265 73.707206) + (end 148.792794 73.355735) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "131d44cf-fc2b-45e1-8228-ada50942e780") ) (segment (start 147.973477 68.16) @@ -36113,15 +36755,15 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "09cfe36f-779d-4933-9d80-77b181b0b239") + (uuid "1459952b-71af-4ce2-839c-ae4f313e8b1f") ) (segment - (start 154.4 85) - (end 154.4 81.590785) + (start 148.792794 73.355735) + (end 148.555735 73.355735) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "16a8a4a0-24ad-4200-a9dd-519c6d73b250") + (uuid "1f025441-5d58-42f3-8021-2896ecda1cc7") ) (segment (start 130.225 158.2) @@ -36132,20 +36774,20 @@ (uuid "23669786-e78a-4400-a7ee-c60a4401c21d") ) (segment - (start 154.4 81.590785) - (end 154.5 81.490785) + (start 148.555735 73.355735) + (end 148.4 73.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "36cfe93e-5abd-4903-8064-5cb786bc921a") + (uuid "26721832-6f20-472a-8cae-b9488e02a126") ) (segment - (start 148.4 72.9) - (end 148.4 68.586522) + (start 154.5 77.7) + (end 152 75.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "380ee44a-34c8-4ca0-840f-d9059c51c0d8") + (uuid "3b003cb6-0e1b-4808-8e2b-1bba6025f73f") ) (segment (start 125.725 154.225) @@ -36155,6 +36797,30 @@ (net "/MCU_Core/PWR_BTN_SENSE") (uuid "3e025c86-a854-4ad3-bdf9-499f619983d1") ) + (segment + (start 147.8 67.71) + (end 146.75 67.71) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "404d20d2-ab7d-4c37-8552-60d3605b2a76") + ) + (segment + (start 147.965686 68.16) + (end 147.865685 68.06) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "4da95dd7-3045-44df-a074-f5fda7c4f002") + ) + (segment + (start 152 75.2) + (end 151.1 75.2) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "4e9c6af4-6aa7-42ac-a1a8-091b8745b4f1") + ) (segment (start 125.307179 152.6) (end 125.307179 153.807179) @@ -36164,20 +36830,36 @@ (uuid "514fa66d-ef75-4ac4-a176-1fbe58f90dc2") ) (segment - (start 151.748529 74.4) - (end 151.251471 74.4) + (start 149.355735 74.155735) + (end 149.144265 73.944265) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "59128402-b640-4ed6-96f9-732e6d815d59") + (uuid "59f8d1f8-d881-45f1-857f-03a27b170a86") ) (segment - (start 154.5 81.490785) - (end 154.5 77.151471) + (start 150.251471 74.4) + (end 150.052843 74.598628) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "5e32d54c-c7d2-4a42-8abd-060a57e16e95") + (uuid "5d3116c9-df2b-40b6-b4c8-401fd29e5453") + ) + (segment + (start 149.144265 73.944265) + (end 149.144265 73.707206) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "5f22eac5-4300-4fc2-b17b-bcbdd0c3a14a") + ) + (segment + (start 146.75 67.71) + (end 146.75 67.19) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "62cef29c-7521-4523-94c0-b4e99426a6a8") ) (segment (start 127.775 157.05) @@ -36211,6 +36893,22 @@ (net "/MCU_Core/PWR_BTN_SENSE") (uuid "7c4b297c-ad9c-42e2-bb13-1dc84dada42b") ) + (segment + (start 147.865685 68.06) + (end 147.8 68.06) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "8014e432-cff3-49d4-b033-909ed5302733") + ) + (segment + (start 151.1 74.751471) + (end 150.748529 74.4) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/PWR_BTN_SENSE") + (uuid "81da75bf-1af7-41e3-bb63-afc83ba69fe4") + ) (segment (start 125.725 155) (end 127.775 157.05) @@ -36220,100 +36918,100 @@ (uuid "84bfff6f-f1fb-495c-96f9-beeff70a3f2b") ) (segment - (start 148.4 68.586522) - (end 147.973477 68.16) + (start 150.052843 74.598628) + (end 149.60995 74.155735) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "8a22e008-9b34-478d-b4f2-46ee31860f0a") + (uuid "87a60766-71cd-4bd5-ab92-f5c0dac2ab87") ) (segment - (start 150.351471 73.5) - (end 149 73.5) + (start 154.4 85) + (end 154.4 81.590785) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "8ebabe9f-1edb-4d7b-bddc-26b07adb0854") + (uuid "884dcb77-1346-4689-a21d-be59f88747fe") ) (segment - (start 147.8 68.06) - (end 147.8 67.71) + (start 148.4 73.2) + (end 148.4 68.586522) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "ae14d7a4-fafc-4dca-a4d3-0acc9a7ff2b8") + (uuid "8a1dada6-24ca-45d2-896a-1aba575cdabe") ) (segment - (start 125.307179 153.807179) - (end 125.725 154.225) + (start 154.4 81.590785) + (end 154.5 81.490785) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "ca76bbee-571e-4bbb-b823-96d85ab21528") + (uuid "9a4177ae-575f-43bb-bca6-bc78864e1ff4") ) (segment - (start 151.251471 74.4) - (end 150.351471 73.5) + (start 154.5 81.490785) + (end 154.5 77.7) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "d67884a6-1f7d-4119-b741-3faecc88e46a") + (uuid "b379c33a-e21e-4e6c-9ee5-da53de9e6121") ) (segment - (start 127.775 158.2) - (end 127.775 157.3) + (start 149.60995 74.155735) + (end 149.355735 74.155735) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "da5664f2-c4e9-47a3-9bf3-06b8d1345997") + (uuid "c03cdaca-0f96-4d33-a7ed-5d6631bf131a") ) (segment - (start 147.965686 68.16) - (end 147.865685 68.06) + (start 150.748529 74.4) + (end 150.251471 74.4) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "e093b419-6d43-4d9b-99be-9e2e113e2592") + (uuid "c2ef2373-7521-4289-a014-d8b1cacb8703") ) (segment - (start 147.865685 68.06) - (end 147.8 68.06) + (start 125.307179 153.807179) + (end 125.725 154.225) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "ed2fd292-bb07-47c8-b76a-8abb18a6b707") + (uuid "ca76bbee-571e-4bbb-b823-96d85ab21528") ) (segment - (start 154.5 77.151471) - (end 151.748529 74.4) + (start 151.1 75.2) + (end 151.1 74.751471) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "f2a3b81f-b44e-42be-8bef-6f7e9e539fb1") + (uuid "cfa3343c-ec4a-499c-b3ed-85f8e2d49802") ) (segment - (start 130.225 157.3) - (end 130.225 158.2) + (start 147.8 68.06) + (end 147.8 67.71) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "f75b3c3f-cf59-4b53-ae36-4419018ea48a") + (uuid "d53cbaca-08b1-430f-ad02-7f90e9df0852") ) (segment - (start 147.8 67.71) - (end 146.75 67.71) + (start 127.775 158.2) + (end 127.775 157.3) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "fededf03-4860-4f34-b5eb-3db654c7973f") + (uuid "da5664f2-c4e9-47a3-9bf3-06b8d1345997") ) (segment - (start 146.75 67.71) - (end 146.75 67.19) + (start 130.225 157.3) + (end 130.225 158.2) (width 0.2) (layer "F.Cu") (net "/MCU_Core/PWR_BTN_SENSE") - (uuid "feea9982-2505-48a0-81f0-4c8163fb2746") + (uuid "f75b3c3f-cf59-4b53-ae36-4419018ea48a") ) (via (at 125.307179 152.6) @@ -36491,22 +37189,6 @@ (net "/MCU_Core/STAT1") (uuid "408cd9a2-561b-4fe9-8d92-aaf24d20638e") ) - (segment - (start 133.25 71.85) - (end 133.35 71.75) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/STAT1") - (uuid "4320b9ad-106a-44f8-869b-193210b0fa27") - ) - (segment - (start 133.35 71.75) - (end 133.35 67.15) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/STAT1") - (uuid "44742fc4-9707-4ded-a6ad-08f92825967f") - ) (segment (start 127.4 114.051471) (end 129.6 116.251471) @@ -36515,14 +37197,6 @@ (net "/MCU_Core/STAT1") (uuid "681544d5-aa0a-497d-a5a6-568413d2c644") ) - (segment - (start 133.35 67.15) - (end 134.58 65.92) - (width 0.2) - (layer "F.Cu") - (net "/MCU_Core/STAT1") - (uuid "70b8c84e-56e2-408f-bef9-9988fc23f96e") - ) (segment (start 128.1 118.8) (end 127.9 118.8) @@ -36553,7 +37227,15 @@ (width 0.2) (layer "F.Cu") (net "/MCU_Core/STAT1") - (uuid "b6fb4009-d574-4455-a27e-726a52ded71e") + (uuid "a2e6804e-ab8d-469b-84a0-48461aff18b6") + ) + (segment + (start 133.35 70) + (end 133.35 67.15) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/STAT1") + (uuid "b149f6e7-dd0b-4ce7-80c7-bb27ddd06b47") ) (segment (start 128.1 103.7) @@ -36563,6 +37245,14 @@ (net "/MCU_Core/STAT1") (uuid "c931fc0c-8f81-4ac6-8ce6-98e48877b84d") ) + (segment + (start 133.35 67.15) + (end 134.58 65.92) + (width 0.2) + (layer "F.Cu") + (net "/MCU_Core/STAT1") + (uuid "cb9b9751-afb3-4b4f-b369-2784a26c6ff1") + ) (segment (start 126.975735 119.724265) (end 126.624265 119.724265) @@ -36572,7 +37262,7 @@ (uuid "d484bd57-1d45-4c22-a2f1-2603ec7139bf") ) (via - (at 133.25 71.85) + (at 133.35 70) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -36596,76 +37286,76 @@ (uuid "ef0c8fa3-ac87-4547-82d4-0234b9465acf") ) (segment - (start 127.075735 119.724265) - (end 127.575 119.225) + (start 132.75 93.001471) + (end 133.9 94.151471) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "2355e55e-d1fb-4be7-b611-6ac85581cee9") + (uuid "040eae74-b407-46ef-a307-ad0ee7ee9fa2") ) (segment - (start 130.6 119.273385) - (end 130.6 119.42) + (start 129.174265 102.822794) + (end 128.297059 103.7) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "3565cc78-5161-4237-9375-d5f0311dba55") + (uuid "0945ee47-f568-4d53-87f8-272f1a80dd08") ) (segment - (start 129.174265 102.822794) - (end 128.297059 103.7) + (start 133.35 70) + (end 133.35 71.75) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "42893218-05ae-42c5-82ef-0e1dfe3e93f4") + (uuid "19db3524-17cf-4db1-91f7-a7ebb59550b3") ) (segment - (start 128.92 120) - (end 128.145 119.225) + (start 127.075735 119.724265) + (end 127.575 119.225) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "5291938e-63f9-4f43-ac1a-342d8ef8faf4") + (uuid "2355e55e-d1fb-4be7-b611-6ac85581cee9") ) (segment - (start 128.297059 103.7) - (end 128.1 103.7) + (start 130.6 119.273385) + (end 130.6 119.42) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "543fa7ee-dd3e-474e-90bc-0e67a5367e62") + (uuid "3565cc78-5161-4237-9375-d5f0311dba55") ) (segment - (start 127.575 119.225) - (end 128.145 119.225) + (start 129.05 99.65) + (end 129.05 102.201471) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "5f7b4474-5577-49c9-9cbc-81e78833925e") + (uuid "3b89f978-0c36-4276-b123-3bf48594613e") ) (segment - (start 133.25 71.85) - (end 132.75 72.35) + (start 128.297059 103.7) + (end 128.1 103.7) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "675a085b-d45f-4208-95a3-fc9919800aab") + (uuid "414b1e36-fd31-4b52-a3f0-3726c26a6043") ) (segment - (start 129.174265 102.325736) - (end 129.174265 102.822794) + (start 128.92 120) + (end 128.145 119.225) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "6945b886-b2fb-4d26-b6dd-3555087a23f1") + (uuid "5291938e-63f9-4f43-ac1a-342d8ef8faf4") ) (segment - (start 129.05 102.201471) - (end 129.174265 102.325736) + (start 127.575 119.225) + (end 128.145 119.225) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "6e3e99c5-17c7-4a88-bbaa-4cf07b5f71d9") + (uuid "5f7b4474-5577-49c9-9cbc-81e78833925e") ) (segment (start 126.624265 119.724265) @@ -36675,14 +37365,6 @@ (net "/MCU_Core/STAT1") (uuid "713661d2-f317-496e-9fec-974027d5fb44") ) - (segment - (start 129.05 99.65) - (end 129.05 102.201471) - (width 0.2) - (layer "B.Cu") - (net "/MCU_Core/STAT1") - (uuid "817647d9-45c8-4d5a-9d14-3e8785fd6e33") - ) (segment (start 131.95 118.6) (end 131.273386 118.6) @@ -36700,28 +37382,28 @@ (uuid "83706c4e-baae-469c-b8d1-58178d128117") ) (segment - (start 133.9 94.151471) - (end 133.9 94.8) + (start 130.6 119.42) + (end 130.02 120) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "8bea2560-c17c-47d5-9e97-eec4b346f9bc") + (uuid "996e67c7-456a-4dc8-9ab8-75301fa57379") ) (segment - (start 133.9 94.8) - (end 129.05 99.65) + (start 133.35 71.75) + (end 132.75 72.35) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "93c5fb38-4c9b-401e-8b13-8fd8f6a30d71") + (uuid "a4ad8121-0955-49f6-95f0-9e1961cc0689") ) (segment - (start 130.6 119.42) - (end 130.02 120) + (start 132.75 72.35) + (end 132.75 93.001471) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "996e67c7-456a-4dc8-9ab8-75301fa57379") + (uuid "af559492-7b13-4884-b1d1-a0e3a28b2afa") ) (segment (start 128.92 120) @@ -36732,20 +37414,36 @@ (uuid "c7288957-78ab-4853-a5b2-db77a78bfe85") ) (segment - (start 132.75 93.001471) - (end 133.9 94.151471) + (start 129.05 102.201471) + (end 129.174265 102.325736) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "efec8be2-00b2-4fb8-86bc-cff155c7c0a9") + (uuid "cbedc896-7900-421e-8501-7beb6407c371") ) (segment - (start 132.75 72.35) - (end 132.75 93.001471) + (start 133.9 94.8) + (end 129.05 99.65) + (width 0.2) + (layer "B.Cu") + (net "/MCU_Core/STAT1") + (uuid "e49b9d96-bfac-40ae-a64b-3384078bbcfc") + ) + (segment + (start 129.174265 102.325736) + (end 129.174265 102.822794) + (width 0.2) + (layer "B.Cu") + (net "/MCU_Core/STAT1") + (uuid "e53b176f-522c-4625-a232-fd7bd980957c") + ) + (segment + (start 133.9 94.151471) + (end 133.9 94.8) (width 0.2) (layer "B.Cu") (net "/MCU_Core/STAT1") - (uuid "fddb7fe3-47c0-48c4-aa40-f4fa477d32e1") + (uuid "fd48dc63-c826-415e-b5b4-26d93ee0466a") ) (segment (start 148.25 153.26) @@ -37140,12 +37838,12 @@ (uuid "e6856a46-123f-404a-a580-7dd60b51da83") ) (segment - (start 124.58 88.08) - (end 124.6 88.1) + (start 125.380735 89.000735) + (end 125.48 89.1) (width 0.2) (layer "F.Cu") (net "VSYS") - (uuid "1fbe4686-baa6-4e20-9edc-b7e0b4c232ab") + (uuid "2ef618db-dca7-4ef1-b50f-dd4c9b67f76c") ) (segment (start 142.2 119.5) @@ -37155,6 +37853,14 @@ (net "VSYS") (uuid "380dd663-72ae-4e5d-b3d1-68e04dfd86d8") ) + (segment + (start 124.720253 89.000735) + (end 125.380735 89.000735) + (width 0.2) + (layer "F.Cu") + (net "VSYS") + (uuid "431a2377-ef63-4644-8abe-ac6c9b98fe21") + ) (segment (start 136.2 116.1) (end 136.2 108.275) @@ -37188,20 +37894,20 @@ (uuid "804eb024-2403-4d08-b095-79ee297535c6") ) (segment - (start 124.58 87) - (end 124.58 88.08) + (start 143.6 124.15) + (end 143.798529 124.15) (width 0.2) (layer "F.Cu") (net "VSYS") - (uuid "8538aaf4-2040-4482-b4e3-f3100d86c28a") + (uuid "d3c9260b-cf43-46e2-90b3-5209f0c22dd1") ) (segment - (start 143.6 124.15) - (end 143.798529 124.15) + (start 124.659759 89.061229) + (end 124.720253 89.000735) (width 0.2) (layer "F.Cu") (net "VSYS") - (uuid "d3c9260b-cf43-46e2-90b3-5209f0c22dd1") + (uuid "d45a832e-b488-43ed-9384-5c45246c3611") ) (segment (start 149.35 129.701471) @@ -37228,7 +37934,7 @@ (uuid "25b03443-2a73-4eeb-b261-a688c8b80604") ) (via - (at 124.6 88.1) + (at 124.659759 89.061229) (size 0.6) (drill 0.3) (layers "F.Cu" "B.Cu") @@ -37284,20 +37990,20 @@ (uuid "08fe07bc-9186-4297-9740-43925940e700") ) (segment - (start 130.425 104.475) - (end 131.45 105.5) + (start 147.67 128.9) + (end 147.67 129.08) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "11b426da-0e39-42a6-9a73-9a0fbcbb9b6f") + (uuid "192bb0eb-2af4-4913-ae2a-cbeb65627655") ) (segment - (start 147.67 128.9) - (end 147.67 129.08) + (start 124.688235 99.463236) + (end 123.675735 100.475736) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "192bb0eb-2af4-4913-ae2a-cbeb65627655") + (uuid "1b14f635-cbd0-4912-8c01-582ae164f665") ) (segment (start 143.4 123.95) @@ -37307,6 +38013,14 @@ (net "VSYS") (uuid "21620008-4f11-4b50-a1fe-b12bb22c1838") ) + (segment + (start 127.626471 104.475) + (end 130.425 104.475) + (width 0.2) + (layer "B.Cu") + (net "VSYS") + (uuid "23ba019c-4bd5-4f4a-98e6-c196e1c066e7") + ) (segment (start 147.181076 113.88) (end 147.9 113.88) @@ -37316,28 +38030,28 @@ (uuid "2904dc3d-c5f0-4e7f-a5de-2606650413b1") ) (segment - (start 138 118.124499) - (end 138 117) + (start 124.659759 89.061229) + (end 124.688235 89.089705) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "2cb69d09-f98c-472b-accd-c3fc8f152e89") + (uuid "29613921-4a6c-4637-8dab-520537c6e21f") ) (segment - (start 123.488235 89.211765) - (end 123.488235 100.336764) + (start 123.975736 100.824264) + (end 127.626471 104.475) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "2e9fe4aa-8364-4834-81a5-4c04b3e993e2") + (uuid "2aa8cd94-9c15-4415-9ed1-cdf8a41ad4ee") ) (segment - (start 124.6 88.1) - (end 123.488235 89.211765) + (start 138 118.124499) + (end 138 117) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "381a6e4a-8da8-4a17-838d-87efc02ff819") + (uuid "2cb69d09-f98c-472b-accd-c3fc8f152e89") ) (segment (start 149.35 130.76) @@ -37411,6 +38125,22 @@ (net "VSYS") (uuid "7c1f54bd-e5fe-4566-a7cf-7ea7ea747524") ) + (segment + (start 123.675735 100.524265) + (end 123.975736 100.824264) + (width 0.2) + (layer "B.Cu") + (net "VSYS") + (uuid "85c74379-c374-4c88-82e3-4cc854bbe645") + ) + (segment + (start 124.659759 89.061229) + (end 124.599265 89.121723) + (width 0.2) + (layer "B.Cu") + (net "VSYS") + (uuid "86341241-7e77-4108-8a9b-a887ab855e06") + ) (segment (start 139 119.124499) (end 138 118.124499) @@ -37420,12 +38150,20 @@ (uuid "8f8319bd-f37b-4a9f-bdb1-8a25e6b63220") ) (segment - (start 127.626471 104.475) - (end 130.425 104.475) + (start 123.675735 100.475736) + (end 123.675735 100.524265) + (width 0.2) + (layer "B.Cu") + (net "VSYS") + (uuid "926e5864-23fb-4aef-9e5b-f1b78c247f44") + ) + (segment + (start 124.688235 89.089705) + (end 124.688235 99.463236) (width 0.2) (layer "B.Cu") (net "VSYS") - (uuid "948c5b0e-7edd-4548-a8ed-c04245e8fca2") + (uuid "a2fabc0a-096c-4ece-8a63-6b6bec5eaedb") ) (segment (start 143.1 123.95) @@ -37475,14 +38213,6 @@ (net "VSYS") (uuid "be64d49b-e3c1-4af7-a4a8-93efaafa676a") ) - (segment - (start 123.488235 100.336764) - (end 127.626471 104.475) - (width 0.2) - (layer "B.Cu") - (net "VSYS") - (uuid "c4046664-66b7-471a-a3ea-0a499666bb41") - ) (segment (start 147.67 129.08) (end 149.35 130.76) @@ -37507,6 +38237,14 @@ (net "VSYS") (uuid "d108fe86-a629-493d-ab62-416302f3cbf7") ) + (segment + (start 130.425 104.475) + (end 131.45 105.5) + (width 0.2) + (layer "B.Cu") + (net "VSYS") + (uuid "dd8a3b2c-3921-4752-a40e-0ae126ea1e49") + ) (segment (start 138 117) (end 137.1 116.1) @@ -38435,56 +39173,40 @@ (filled_polygon (layer "In1.Cu") (pts - (xy 128.943039 60.270185) (xy 128.988794 60.322989) (xy 129 60.3745) (xy 129 63.11) (xy 129.982893 63.11) - (xy 130.049932 63.129685) (xy 130.095687 63.182489) (xy 130.105631 63.251647) (xy 130.085995 63.302891) - (xy 130.040609 63.370814) (xy 130.040602 63.370827) (xy 129.980264 63.516498) (xy 129.980261 63.51651) - (xy 129.9495 63.671153) (xy 129.9495 63.828846) (xy 129.980261 63.983489) (xy 129.980264 63.983501) - (xy 130.040602 64.129172) (xy 130.040609 64.129185) (xy 130.12821 64.260288) (xy 130.128213 64.260292) - (xy 130.239707 64.371786) (xy 130.239711 64.371789) (xy 130.370814 64.45939) (xy 130.370827 64.459397) - (xy 130.416254 64.478213) (xy 130.516503 64.519737) (xy 130.671153 64.550499) (xy 130.671156 64.5505) - (xy 130.671158 64.5505) (xy 130.828844 64.5505) (xy 130.828845 64.550499) (xy 130.983497 64.519737) - (xy 131.129179 64.459394) (xy 131.260289 64.371789) (xy 131.371789 64.260289) (xy 131.459394 64.129179) - (xy 131.519737 63.983497) (xy 131.5505 63.828842) (xy 131.5505 63.671158) (xy 131.5505 63.671155) - (xy 131.550499 63.671153) (xy 131.540679 63.621786) (xy 131.519737 63.516503) (xy 131.517163 63.510288) - (xy 131.459397 63.370827) (xy 131.45939 63.370814) (xy 131.414005 63.302891) (xy 131.393127 63.236214) - (xy 131.411611 63.168833) (xy 131.46359 63.122143) (xy 131.517107 63.11) (xy 147 63.11) (xy 147 62.673992) - (xy 149.1345 62.673992) (xy 149.1345 63.326007) (xy 149.173907 63.524119) (xy 149.173909 63.524127) - (xy 149.251212 63.710752) (xy 149.251217 63.710762) (xy 149.363441 63.878718) (xy 149.506281 64.021558) - (xy 149.674237 64.133782) (xy 149.674241 64.133784) (xy 149.674244 64.133786) (xy 149.860873 64.211091) - (xy 150.024288 64.243596) (xy 150.058992 64.250499) (xy 150.058996 64.2505) (xy 150.058997 64.2505) - (xy 150.261004 64.2505) (xy 150.261005 64.250499) (xy 150.459127 64.211091) (xy 150.645756 64.133786) - (xy 150.72611 64.080094) (xy 150.792786 64.059217) (xy 150.860166 64.077701) (xy 150.863865 64.080078) - (xy 150.944244 64.133786) (xy 151.130873 64.211091) (xy 151.294288 64.243596) (xy 151.328992 64.250499) - (xy 151.328996 64.2505) (xy 151.328997 64.2505) (xy 151.531004 64.2505) (xy 151.531005 64.250499) - (xy 151.729127 64.211091) (xy 151.810338 64.177451) (xy 151.879804 64.169983) (xy 151.924859 64.189594) - (xy 151.925128 64.189103) (xy 151.930613 64.192098) (xy 151.932099 64.192745) (xy 151.932911 64.193353) - (xy 151.932913 64.193354) (xy 152.06762 64.243596) (xy 152.067627 64.243598) (xy 152.127155 64.249999) - (xy 152.127172 64.25) (xy 152.45 64.25) (xy 152.45 63.365865) (xy 152.450067 63.361789) (xy 152.4504 63.351638) - (xy 152.4555 63.326003) (xy 152.4555 63.28583) (xy 152.469745 63.300075) (xy 152.555255 63.349444) - (xy 152.65063 63.375) (xy 152.74937 63.375) (xy 152.844745 63.349444) (xy 152.930255 63.300075) - (xy 152.95 63.28033) (xy 152.95 64.25) (xy 153.272828 64.25) (xy 153.272844 64.249999) (xy 153.332372 64.243598) - (xy 153.332379 64.243596) (xy 153.467086 64.193354) (xy 153.467093 64.19335) (xy 153.582187 64.10719) - (xy 153.58219 64.107187) (xy 153.66835 63.992093) (xy 153.668354 63.992086) (xy 153.718596 63.857379) - (xy 153.718598 63.857372) (xy 153.724999 63.797844) (xy 153.725 63.797827) (xy 153.725 63.25) (xy 152.98033 63.25) - (xy 153.000075 63.230255) (xy 153.049444 63.144745) (xy 153.075 63.04937) (xy 153.075 62.95063) - (xy 153.049444 62.855255) (xy 153.000075 62.769745) (xy 152.98033 62.75) (xy 153.725 62.75) (xy 153.725 62.202172) - (xy 153.724999 62.202155) (xy 153.718598 62.142627) (xy 153.718596 62.14262) (xy 153.668354 62.007913) - (xy 153.66835 62.007906) (xy 153.58219 61.892812) (xy 153.582187 61.892809) (xy 153.467093 61.806649) - (xy 153.467086 61.806645) (xy 153.332379 61.756403) (xy 153.332372 61.756401) (xy 153.272844 61.75) - (xy 152.95 61.75) (xy 152.95 62.71967) (xy 152.930255 62.699925) (xy 152.844745 62.650556) (xy 152.74937 62.625) - (xy 152.65063 62.625) (xy 152.555255 62.650556) (xy 152.469745 62.699925) (xy 152.4555 62.71417) - (xy 152.4555 62.673997) (xy 152.452383 62.658326) (xy 152.45 62.634134) (xy 152.45 61.75) (xy 152.127155 61.75) - (xy 152.067627 61.756401) (xy 152.06762 61.756403) (xy 151.932913 61.806645) (xy 151.932911 61.806646) - (xy 151.932092 61.80726) (xy 151.931134 61.807616) (xy 151.925132 61.810895) (xy 151.92466 61.810031) - (xy 151.866625 61.831671) (xy 151.810338 61.822547) (xy 151.729131 61.78891) (xy 151.729119 61.788907) - (xy 151.531007 61.7495) (xy 151.531003 61.7495) (xy 151.328997 61.7495) (xy 151.328992 61.7495) - (xy 151.13088 61.788907) (xy 151.130872 61.788909) (xy 150.944244 61.866213) (xy 150.863891 61.919904) - (xy 150.797213 61.940782) (xy 150.729833 61.922297) (xy 150.726109 61.919904) (xy 150.645755 61.866213) - (xy 150.459127 61.788909) (xy 150.459119 61.788907) (xy 150.261007 61.7495) (xy 150.261003 61.7495) - (xy 150.058997 61.7495) (xy 150.058992 61.7495) (xy 149.86088 61.788907) (xy 149.860872 61.788909) - (xy 149.674247 61.866212) (xy 149.674237 61.866217) (xy 149.506281 61.978441) (xy 149.363441 62.121281) - (xy 149.251217 62.289237) (xy 149.251212 62.289247) (xy 149.173909 62.475872) (xy 149.173907 62.47588) - (xy 149.1345 62.673992) (xy 147 62.673992) (xy 147 60.3745) (xy 147.019685 60.307461) (xy 147.072489 60.261706) + (xy 128.943039 60.270185) (xy 128.988794 60.322989) (xy 129 60.3745) (xy 129 63.11) (xy 147 63.11) + (xy 147 61.818995) (xy 148.524499 61.818995) (xy 148.551418 61.954322) (xy 148.551421 61.954332) + (xy 148.604221 62.081804) (xy 148.604228 62.081817) (xy 148.680885 62.196541) (xy 148.680888 62.196545) + (xy 148.778454 62.294111) (xy 148.778458 62.294114) (xy 148.893182 62.370771) (xy 148.893195 62.370778) + (xy 149.020667 62.423578) (xy 149.020672 62.42358) (xy 149.020676 62.42358) (xy 149.020677 62.423581) + (xy 149.156004 62.4505) (xy 149.156007 62.4505) (xy 149.293995 62.4505) (xy 149.385041 62.432389) + (xy 149.429328 62.42358) (xy 149.556811 62.370775) (xy 149.671542 62.294114) (xy 149.769114 62.196542) + (xy 149.845775 62.081811) (xy 149.89858 61.954328) (xy 149.9255 61.818995) (xy 152.774499 61.818995) + (xy 152.801418 61.954322) (xy 152.801421 61.954332) (xy 152.854221 62.081804) (xy 152.854228 62.081817) + (xy 152.930885 62.196541) (xy 152.930888 62.196545) (xy 153.028454 62.294111) (xy 153.028458 62.294114) + (xy 153.143182 62.370771) (xy 153.143195 62.370778) (xy 153.270667 62.423578) (xy 153.270672 62.42358) + (xy 153.270676 62.42358) (xy 153.270677 62.423581) (xy 153.406004 62.4505) (xy 153.406007 62.4505) + (xy 153.543995 62.4505) (xy 153.635041 62.432389) (xy 153.679328 62.42358) (xy 153.806811 62.370775) + (xy 153.921542 62.294114) (xy 154.019114 62.196542) (xy 154.095775 62.081811) (xy 154.14858 61.954328) + (xy 154.1755 61.818993) (xy 154.1755 61.681007) (xy 154.1755 61.681004) (xy 154.148581 61.545677) + (xy 154.14858 61.545676) (xy 154.14858 61.545672) (xy 154.148578 61.545667) (xy 154.095778 61.418195) + (xy 154.095771 61.418182) (xy 154.019114 61.303458) (xy 154.019111 61.303454) (xy 153.921545 61.205888) + (xy 153.921541 61.205885) (xy 153.806817 61.129228) (xy 153.806804 61.129221) (xy 153.679332 61.076421) + (xy 153.679322 61.076418) (xy 153.543995 61.0495) (xy 153.543993 61.0495) (xy 153.406007 61.0495) + (xy 153.406005 61.0495) (xy 153.270677 61.076418) (xy 153.270667 61.076421) (xy 153.143195 61.129221) + (xy 153.143182 61.129228) (xy 153.028458 61.205885) (xy 153.028454 61.205888) (xy 152.930888 61.303454) + (xy 152.930885 61.303458) (xy 152.854228 61.418182) (xy 152.854221 61.418195) (xy 152.801421 61.545667) + (xy 152.801418 61.545677) (xy 152.7745 61.681004) (xy 152.7745 61.681007) (xy 152.7745 61.818993) + (xy 152.7745 61.818995) (xy 152.774499 61.818995) (xy 149.9255 61.818995) (xy 149.9255 61.818993) + (xy 149.9255 61.681007) (xy 149.9255 61.681004) (xy 149.898581 61.545677) (xy 149.89858 61.545676) + (xy 149.89858 61.545672) (xy 149.898578 61.545667) (xy 149.845778 61.418195) (xy 149.845771 61.418182) + (xy 149.769114 61.303458) (xy 149.769111 61.303454) (xy 149.671545 61.205888) (xy 149.671541 61.205885) + (xy 149.556817 61.129228) (xy 149.556804 61.129221) (xy 149.429332 61.076421) (xy 149.429322 61.076418) + (xy 149.293995 61.0495) (xy 149.293993 61.0495) (xy 149.156007 61.0495) (xy 149.156005 61.0495) + (xy 149.020677 61.076418) (xy 149.020667 61.076421) (xy 148.893195 61.129221) (xy 148.893182 61.129228) + (xy 148.778458 61.205885) (xy 148.778454 61.205888) (xy 148.680888 61.303454) (xy 148.680885 61.303458) + (xy 148.604228 61.418182) (xy 148.604221 61.418195) (xy 148.551421 61.545667) (xy 148.551418 61.545677) + (xy 148.5245 61.681004) (xy 148.5245 61.681007) (xy 148.5245 61.818993) (xy 148.5245 61.818995) + (xy 148.524499 61.818995) (xy 147 61.818995) (xy 147 60.3745) (xy 147.019685 60.307461) (xy 147.072489 60.261706) (xy 147.124 60.2505) (xy 154.6255 60.2505) (xy 154.692539 60.270185) (xy 154.738294 60.322989) (xy 154.7495 60.3745) (xy 154.7495 84.102242) (xy 154.729815 84.169281) (xy 154.677011 84.215036) (xy 154.607853 84.22498) (xy 154.601309 84.223859) (xy 154.478846 84.1995) (xy 154.478842 84.1995) (xy 154.321158 84.1995) @@ -39847,226 +40569,228 @@ (xy 146.815401 91.336728) (xy 146.587105 91.262549) (xy 146.350025 91.225) (xy 146.109975 91.225) (xy 145.872894 91.262549) (xy 145.644598 91.336728) (xy 145.450626 91.435563) (xy 145.381957 91.448459) (xy 145.317216 91.422183) (xy 145.276959 91.365076) (xy 145.273967 91.295271) (xy 145.295955 91.249591) - (xy 145.304442 91.238532) (xy 145.420815 91.036969) (xy 145.425854 91.024805) (xy 145.509879 90.821947) + (xy 145.304442 91.238532) (xy 145.420815 91.036969) (xy 145.426385 91.023523) (xy 145.509879 90.821947) (xy 145.509878 90.821947) (xy 145.509882 90.82194) (xy 145.570121 90.597126) (xy 145.6005 90.366372) (xy 145.6005 90.224096) (xy 147.6995 90.224096) (xy 147.6995 90.381789) (xy 147.730261 90.536432) (xy 147.730264 90.536444) (xy 147.790602 90.682115) (xy 147.790609 90.682128) (xy 147.87821 90.813231) (xy 147.878213 90.813235) (xy 147.989707 90.924729) (xy 147.989711 90.924732) (xy 148.120814 91.012333) - (xy 148.120827 91.01234) (xy 148.206031 91.047632) (xy 148.266503 91.07268) (xy 148.421153 91.103442) + (xy 148.120827 91.01234) (xy 148.266498 91.072678) (xy 148.266503 91.07268) (xy 148.421153 91.103442) (xy 148.421156 91.103443) (xy 148.421158 91.103443) (xy 148.578844 91.103443) (xy 148.578845 91.103442) - (xy 148.733497 91.07268) (xy 148.849078 91.024805) (xy 148.879172 91.01234) (xy 148.879172 91.012339) - (xy 148.879179 91.012337) (xy 149.010289 90.924732) (xy 149.121789 90.813232) (xy 149.209394 90.682122) - (xy 149.269737 90.53644) (xy 149.283006 90.469735) (xy 149.29267 90.421153) (xy 149.6995 90.421153) - (xy 149.6995 90.578846) (xy 149.730261 90.733489) (xy 149.730264 90.733501) (xy 149.790602 90.879172) - (xy 149.790609 90.879185) (xy 149.87821 91.010288) (xy 149.878213 91.010292) (xy 149.989707 91.121786) - (xy 149.989711 91.121789) (xy 150.120814 91.20939) (xy 150.120827 91.209397) (xy 150.266498 91.269735) - (xy 150.266503 91.269737) (xy 150.421153 91.300499) (xy 150.421156 91.3005) (xy 150.421158 91.3005) - (xy 150.578844 91.3005) (xy 150.578845 91.300499) (xy 150.733497 91.269737) (xy 150.879179 91.209394) - (xy 151.010289 91.121789) (xy 151.121789 91.010289) (xy 151.209394 90.879179) (xy 151.269737 90.733497) - (xy 151.3005 90.578842) (xy 151.3005 90.421158) (xy 151.3005 90.421155) (xy 151.300499 90.421153) - (xy 151.292669 90.381789) (xy 151.269737 90.266503) (xy 151.252174 90.224101) (xy 151.209397 90.120827) - (xy 151.20939 90.120814) (xy 151.121789 89.989711) (xy 151.121786 89.989707) (xy 151.010292 89.878213) - (xy 151.010288 89.87821) (xy 150.879185 89.790609) (xy 150.879172 89.790602) (xy 150.733501 89.730264) - (xy 150.733489 89.730261) (xy 150.578845 89.6995) (xy 150.578842 89.6995) (xy 150.421158 89.6995) - (xy 150.421155 89.6995) (xy 150.26651 89.730261) (xy 150.266498 89.730264) (xy 150.120827 89.790602) - (xy 150.120814 89.790609) (xy 149.989711 89.87821) (xy 149.989707 89.878213) (xy 149.878213 89.989707) - (xy 149.87821 89.989711) (xy 149.790609 90.120814) (xy 149.790602 90.120827) (xy 149.730264 90.266498) - (xy 149.730261 90.26651) (xy 149.6995 90.421153) (xy 149.29267 90.421153) (xy 149.298693 90.390874) - (xy 149.3005 90.381787) (xy 149.3005 90.224098) (xy 149.300499 90.224096) (xy 149.282505 90.133634) - (xy 149.269737 90.069446) (xy 149.23671 89.989711) (xy 149.209397 89.92377) (xy 149.20939 89.923757) - (xy 149.121789 89.792654) (xy 149.121786 89.79265) (xy 149.010292 89.681156) (xy 149.010288 89.681153) - (xy 148.879185 89.593552) (xy 148.879172 89.593545) (xy 148.733501 89.533207) (xy 148.733489 89.533204) - (xy 148.578845 89.502443) (xy 148.578842 89.502443) (xy 148.421158 89.502443) (xy 148.421155 89.502443) - (xy 148.26651 89.533204) (xy 148.266498 89.533207) (xy 148.120827 89.593545) (xy 148.120814 89.593552) - (xy 147.989711 89.681153) (xy 147.989707 89.681156) (xy 147.878213 89.79265) (xy 147.87821 89.792654) - (xy 147.790609 89.923757) (xy 147.790602 89.92377) (xy 147.730264 90.069441) (xy 147.730261 90.069453) - (xy 147.6995 90.224096) (xy 145.6005 90.224096) (xy 145.6005 90.133628) (xy 145.570121 89.902874) - (xy 145.509882 89.67806) (xy 145.509879 89.678052) (xy 145.420819 89.463039) (xy 145.420811 89.463023) - (xy 145.304446 89.261475) (xy 145.304442 89.261468) (xy 145.163824 89.078211) (xy 145.162757 89.07682) - (xy 145.162751 89.076813) (xy 144.998186 88.912248) (xy 144.998179 88.912242) (xy 144.81354 88.770564) - (xy 144.813538 88.770562) (xy 144.813532 88.770558) (xy 144.813527 88.770555) (xy 144.813524 88.770553) - (xy 144.611976 88.654188) (xy 144.61196 88.65418) (xy 144.396947 88.56512) (xy 144.192327 88.510292) - (xy 144.172126 88.504879) (xy 144.172125 88.504878) (xy 144.172122 88.504878) (xy 143.941382 88.474501) - (xy 143.941377 88.4745) (xy 143.941372 88.4745) (xy 143.708628 88.4745) (xy 143.708622 88.4745) - (xy 143.708617 88.474501) (xy 143.477877 88.504878) (xy 143.253052 88.56512) (xy 143.038039 88.65418) - (xy 143.038023 88.654188) (xy 142.836475 88.770553) (xy 142.836459 88.770564) (xy 142.65182 88.912242) - (xy 142.651813 88.912248) (xy 142.487248 89.076813) (xy 142.487242 89.07682) (xy 142.345564 89.261459) - (xy 142.345553 89.261475) (xy 142.229188 89.463023) (xy 142.22918 89.463039) (xy 142.14012 89.678052) - (xy 142.079878 89.902877) (xy 142.049501 90.133617) (xy 142.0495 90.133634) (xy 142.0495 90.366365) - (xy 142.049501 90.366382) (xy 142.077471 90.578842) (xy 142.079879 90.597126) (xy 142.137785 90.813235) - (xy 142.14012 90.821947) (xy 142.22918 91.03696) (xy 142.229188 91.036976) (xy 142.345553 91.238524) - (xy 142.345564 91.23854) (xy 142.487242 91.423179) (xy 142.487248 91.423186) (xy 142.651813 91.587751) - (xy 142.651819 91.587756) (xy 142.836468 91.729442) (xy 142.836475 91.729446) (xy 143.038023 91.845811) - (xy 143.038039 91.845819) (xy 143.253052 91.934879) (xy 143.253054 91.934879) (xy 143.25306 91.934882) - (xy 143.477874 91.995121) (xy 143.708628 92.0255) (xy 143.708635 92.0255) (xy 143.941365 92.0255) - (xy 143.941372 92.0255) (xy 144.172126 91.995121) (xy 144.39694 91.934882) (xy 144.558228 91.868075) - (xy 144.61196 91.845819) (xy 144.611961 91.845817) (xy 144.611969 91.845815) (xy 144.778478 91.74968) - (xy 144.846375 91.733208) (xy 144.912402 91.75606) (xy 144.955593 91.810981) (xy 144.962235 91.880534) - (xy 144.940796 91.929951) (xy 144.925704 91.950724) (xy 144.816728 92.164598) (xy 144.742549 92.392894) - (xy 144.705 92.629974) (xy 144.705 92.870025) (xy 144.742549 93.107105) (xy 144.816728 93.335401) - (xy 144.925705 93.549277) (xy 144.989441 93.637003) (xy 144.989443 93.637003) (xy 145.726624 92.899821) - (xy 145.740778 92.952642) (xy 145.809896 93.072357) (xy 145.907643 93.170104) (xy 146.027358 93.239222) - (xy 146.080177 93.253375) (xy 145.310679 94.022871) (xy 145.288175 94.048654) (xy 145.236204 94.086413) - (xy 145.066416 94.256201) (xy 144.925276 94.450463) (xy 144.816265 94.664406) (xy 144.742063 94.892777) - (xy 144.7045 95.129941) (xy 144.7045 95.370058) (xy 144.742063 95.607222) (xy 144.816265 95.835593) - (xy 144.894791 95.989707) (xy 144.925276 96.049536) (xy 145.066414 96.243796) (xy 145.066416 96.243798) - (xy 145.234937 96.412319) (xy 145.268422 96.473642) (xy 145.263438 96.543334) (xy 145.234937 96.587681) - (xy 145.066416 96.756201) (xy 144.925276 96.950463) (xy 144.816265 97.164406) (xy 144.743063 97.389699) - (xy 144.742063 97.392778) (xy 144.7045 97.629941) (xy 144.7045 97.870059) (xy 144.729874 98.030261) - (xy 144.742063 98.107222) (xy 144.816265 98.335593) (xy 144.925278 98.54954) (xy 144.93973 98.569431) - (xy 144.963211 98.635237) (xy 144.947386 98.703291) (xy 144.897281 98.751986) (xy 144.828803 98.765862) - (xy 144.777413 98.749704) (xy 144.611976 98.654188) (xy 144.61196 98.65418) (xy 144.396947 98.56512) - (xy 144.172122 98.504878) (xy 143.941382 98.474501) (xy 143.941377 98.4745) (xy 143.941372 98.4745) - (xy 143.708628 98.4745) (xy 143.708622 98.4745) (xy 143.708617 98.474501) (xy 143.477877 98.504878) - (xy 143.253052 98.56512) (xy 143.038039 98.65418) (xy 143.038023 98.654188) (xy 142.836475 98.770553) - (xy 142.836459 98.770564) (xy 142.65182 98.912242) (xy 142.651813 98.912248) (xy 142.487248 99.076813) - (xy 142.487242 99.07682) (xy 142.345564 99.261459) (xy 142.345553 99.261475) (xy 142.229188 99.463023) - (xy 142.22918 99.463039) (xy 142.140121 99.678051) (xy 142.140121 99.678052) (xy 142.140118 99.67806) - (xy 142.126147 99.730201) (xy 142.108374 99.796528) (xy 142.072008 99.856188) (xy 142.009161 99.886716) - (xy 141.939785 99.878421) (xy 141.900918 99.852114) (xy 141.80894 99.760136) (xy 141.808935 99.760132) - (xy 141.710932 99.688929) (xy 141.668266 99.633599) (xy 141.662287 99.563986) (xy 141.694892 99.502191) - (xy 141.714926 99.485509) (xy 141.751118 99.461325) (xy 141.810289 99.421789) (xy 141.921789 99.310289) - (xy 142.009394 99.179179) (xy 142.015792 99.163734) (xy 142.037817 99.11056) (xy 142.069737 99.033497) - (xy 142.1005 98.878842) (xy 142.1005 98.721158) (xy 142.1005 98.721155) (xy 142.100499 98.721153) - (xy 142.083409 98.635237) (xy 142.069737 98.566503) (xy 142.044212 98.504879) (xy 142.009397 98.420827) - (xy 142.00939 98.420814) (xy 141.921789 98.289711) (xy 141.921786 98.289707) (xy 141.810292 98.178213) - (xy 141.810288 98.17821) (xy 141.679185 98.090609) (xy 141.679172 98.090602) (xy 141.533501 98.030264) - (xy 141.533489 98.030261) (xy 141.378845 97.9995) (xy 141.378842 97.9995) (xy 141.221158 97.9995) - (xy 141.221155 97.9995) (xy 141.06651 98.030261) (xy 141.066498 98.030264) (xy 140.920827 98.090602) - (xy 140.920814 98.090609) (xy 140.789711 98.17821) (xy 140.789707 98.178213) (xy 140.678213 98.289707) - (xy 140.67821 98.289711) (xy 140.590609 98.420814) (xy 140.590602 98.420827) (xy 140.530264 98.566498) - (xy 140.530261 98.56651) (xy 140.4995 98.721153) (xy 140.4995 98.878846) (xy 140.530261 99.033489) - (xy 140.530264 99.033501) (xy 140.590602 99.179172) (xy 140.590606 99.179179) (xy 140.604018 99.199251) - (xy 140.624896 99.265929) (xy 140.606412 99.333309) (xy 140.554434 99.379999) (xy 140.520315 99.390616) - (xy 140.369359 99.414526) (xy 140.126027 99.493588) (xy 140.126024 99.493589) (xy 139.898049 99.60975) - (xy 139.691064 99.760132) (xy 139.691059 99.760136) (xy 139.510136 99.941059) (xy 139.510132 99.941064) - (xy 139.35975 100.148049) (xy 139.243589 100.376024) (xy 139.243588 100.376027) (xy 139.164526 100.619359) - (xy 139.135317 100.803778) (xy 139.1245 100.87207) (xy 135.8755 100.87207) (xy 135.835474 100.619361) - (xy 135.795942 100.497693) (xy 135.756411 100.376027) (xy 135.75641 100.376024) (xy 135.700609 100.26651) - (xy 135.640252 100.148053) (xy 135.615364 100.113798) (xy 135.489867 99.941064) (xy 135.489863 99.941059) - (xy 135.30894 99.760136) (xy 135.308935 99.760132) (xy 135.10195 99.60975) (xy 135.101949 99.609749) - (xy 135.101947 99.609748) (xy 135.023421 99.569737) (xy 134.873975 99.493589) (xy 134.873972 99.493588) - (xy 134.63064 99.414526) (xy 134.47968 99.390616) (xy 134.37793 99.3745) (xy 134.12207 99.3745) - (xy 134.037833 99.387842) (xy 133.869359 99.414526) (xy 133.626027 99.493588) (xy 133.626024 99.493589) - (xy 133.398049 99.60975) (xy 133.191065 99.760131) (xy 133.09908 99.852116) (xy 133.037756 99.8856) - (xy 132.968065 99.880616) (xy 132.912131 99.838744) (xy 132.891626 99.796532) (xy 132.859882 99.67806) - (xy 132.859879 99.678052) (xy 132.770819 99.463039) (xy 132.770811 99.463023) (xy 132.654446 99.261475) - (xy 132.654442 99.261468) (xy 132.538647 99.110561) (xy 132.512757 99.07682) (xy 132.512751 99.076813) - (xy 132.348186 98.912248) (xy 132.348179 98.912242) (xy 132.16354 98.770564) (xy 132.163538 98.770562) - (xy 132.163532 98.770558) (xy 132.163527 98.770555) (xy 132.163524 98.770553) (xy 131.961976 98.654188) - (xy 131.96196 98.65418) (xy 131.746947 98.56512) (xy 131.522122 98.504878) (xy 131.291382 98.474501) - (xy 131.291377 98.4745) (xy 131.291372 98.4745) (xy 131.058628 98.4745) (xy 131.058622 98.4745) - (xy 131.058617 98.474501) (xy 130.827877 98.504878) (xy 130.603052 98.56512) (xy 130.388039 98.65418) - (xy 130.388023 98.654188) (xy 130.186475 98.770553) (xy 130.186459 98.770564) (xy 130.00182 98.912242) - (xy 130.001813 98.912248) (xy 129.837248 99.076813) (xy 129.837242 99.07682) (xy 129.695564 99.261459) - (xy 129.695553 99.261475) (xy 129.579188 99.463023) (xy 129.57918 99.463039) (xy 129.49012 99.678052) - (xy 129.490118 99.67806) (xy 129.478265 99.722298) (xy 129.476147 99.730201) (xy 129.439782 99.789861) - (xy 129.376934 99.82039) (xy 129.307559 99.812095) (xy 129.253681 99.76761) (xy 129.234755 99.722298) - (xy 129.225953 99.678051) (xy 129.219737 99.6468) (xy 129.162822 99.509394) (xy 129.159397 99.501124) - (xy 129.15939 99.501111) (xy 129.071789 99.370008) (xy 129.071786 99.370004) (xy 128.960292 99.25851) - (xy 128.960288 99.258507) (xy 128.829185 99.170906) (xy 128.829172 99.170899) (xy 128.683501 99.110561) - (xy 128.683489 99.110558) (xy 128.528845 99.079797) (xy 128.528842 99.079797) (xy 128.371158 99.079797) - (xy 128.371155 99.079797) (xy 128.21651 99.110558) (xy 128.216498 99.110561) (xy 128.070827 99.170899) - (xy 128.070814 99.170906) (xy 127.939711 99.258507) (xy 127.939707 99.25851) (xy 127.828213 99.370004) - (xy 127.82821 99.370008) (xy 127.740609 99.501111) (xy 127.740602 99.501124) (xy 127.680264 99.646795) - (xy 127.680261 99.646807) (xy 127.6495 99.80145) (xy 125.849075 99.80145) (xy 125.719997 99.715202) - (xy 125.719984 99.715195) (xy 125.574313 99.654857) (xy 125.574301 99.654854) (xy 125.419657 99.624093) - (xy 125.419654 99.624093) (xy 125.26197 99.624093) (xy 125.261967 99.624093) (xy 125.107322 99.654854) - (xy 125.10731 99.654857) (xy 124.96164 99.715195) (xy 124.961626 99.715203) (xy 124.915517 99.746011) - (xy 124.848839 99.766887) (xy 124.799177 99.757468) (xy 124.733498 99.730263) (xy 124.733488 99.73026) - (xy 124.578845 99.6995) (xy 124.578842 99.6995) (xy 124.421158 99.6995) (xy 124.421155 99.6995) - (xy 124.26651 99.730261) (xy 124.266498 99.730264) (xy 124.120827 99.790602) (xy 124.120814 99.790609) - (xy 123.989711 99.87821) (xy 123.989707 99.878213) (xy 123.878213 99.989707) (xy 123.87821 99.989711) - (xy 123.790609 100.120814) (xy 123.790602 100.120827) (xy 123.730264 100.266498) (xy 123.730261 100.26651) - (xy 123.6995 100.421153) (xy 120.2505 100.421153) (xy 120.2505 98.468995) (xy 121.049499 98.468995) - (xy 121.076418 98.604322) (xy 121.076421 98.604332) (xy 121.129221 98.731804) (xy 121.129228 98.731817) - (xy 121.205885 98.846541) (xy 121.205888 98.846545) (xy 121.303454 98.944111) (xy 121.303458 98.944114) - (xy 121.418182 99.020771) (xy 121.418195 99.020778) (xy 121.500149 99.054724) (xy 121.545672 99.07358) - (xy 121.545676 99.07358) (xy 121.545677 99.073581) (xy 121.681004 99.1005) (xy 121.681007 99.1005) - (xy 121.818995 99.1005) (xy 121.923073 99.079797) (xy 121.954328 99.07358) (xy 122.081811 99.020775) - (xy 122.196542 98.944114) (xy 122.294114 98.846542) (xy 122.370775 98.731811) (xy 122.42358 98.604328) - (xy 122.443362 98.504878) (xy 122.4505 98.468995) (xy 122.4505 98.331004) (xy 122.423581 98.195677) - (xy 122.42358 98.195676) (xy 122.42358 98.195672) (xy 122.416348 98.178213) (xy 122.370778 98.068195) - (xy 122.370771 98.068182) (xy 122.294114 97.953458) (xy 122.294111 97.953454) (xy 122.196545 97.855888) - (xy 122.196541 97.855885) (xy 122.081817 97.779228) (xy 122.081804 97.779221) (xy 121.954332 97.726421) - (xy 121.954322 97.726418) (xy 121.818995 97.6995) (xy 121.818993 97.6995) (xy 121.681007 97.6995) - (xy 121.681005 97.6995) (xy 121.545677 97.726418) (xy 121.545667 97.726421) (xy 121.418195 97.779221) - (xy 121.418182 97.779228) (xy 121.303458 97.855885) (xy 121.303454 97.855888) (xy 121.205888 97.953454) - (xy 121.205885 97.953458) (xy 121.129228 98.068182) (xy 121.129221 98.068195) (xy 121.076421 98.195667) - (xy 121.076418 98.195677) (xy 121.0495 98.331004) (xy 121.0495 98.331007) (xy 121.0495 98.468993) - (xy 121.0495 98.468995) (xy 121.049499 98.468995) (xy 120.2505 98.468995) (xy 120.2505 94.321153) - (xy 132.4995 94.321153) (xy 132.4995 94.478846) (xy 132.530261 94.633489) (xy 132.530264 94.633501) - (xy 132.590602 94.779172) (xy 132.590609 94.779185) (xy 132.67821 94.910288) (xy 132.678213 94.910292) - (xy 132.789707 95.021786) (xy 132.789711 95.021789) (xy 132.920814 95.10939) (xy 132.920827 95.109397) - (xy 133.066498 95.169735) (xy 133.066503 95.169737) (xy 133.221153 95.200499) (xy 133.221156 95.2005) - (xy 133.221158 95.2005) (xy 133.378844 95.2005) (xy 133.378845 95.200499) (xy 133.533497 95.169737) - (xy 133.679179 95.109394) (xy 133.810289 95.021789) (xy 133.921789 94.910289) (xy 134.009394 94.779179) - (xy 134.069737 94.633497) (xy 134.1005 94.478842) (xy 134.1005 94.321158) (xy 134.1005 94.321155) - (xy 134.100499 94.321153) (xy 134.081659 94.22644) (xy 134.069737 94.166503) (xy 134.036564 94.086416) - (xy 134.009397 94.020827) (xy 134.00939 94.020814) (xy 133.921789 93.889711) (xy 133.921786 93.889707) - (xy 133.810292 93.778213) (xy 133.810288 93.77821) (xy 133.679185 93.690609) (xy 133.679172 93.690602) - (xy 133.533501 93.630264) (xy 133.533489 93.630261) (xy 133.378845 93.5995) (xy 133.378842 93.5995) - (xy 133.221158 93.5995) (xy 133.221155 93.5995) (xy 133.06651 93.630261) (xy 133.066498 93.630264) - (xy 132.920827 93.690602) (xy 132.920814 93.690609) (xy 132.789711 93.77821) (xy 132.789707 93.778213) - (xy 132.678213 93.889707) (xy 132.67821 93.889711) (xy 132.590609 94.020814) (xy 132.590602 94.020827) - (xy 132.530264 94.166498) (xy 132.530261 94.16651) (xy 132.4995 94.321153) (xy 120.2505 94.321153) - (xy 120.2505 93.347094) (xy 135.015922 93.347094) (xy 135.015922 93.504787) (xy 135.046683 93.65943) - (xy 135.046686 93.659442) (xy 135.107024 93.805113) (xy 135.107031 93.805126) (xy 135.194632 93.936229) - (xy 135.194635 93.936233) (xy 135.306129 94.047727) (xy 135.306133 94.04773) (xy 135.437236 94.135331) - (xy 135.437249 94.135338) (xy 135.58292 94.195676) (xy 135.582925 94.195678) (xy 135.737575 94.22644) - (xy 135.737578 94.226441) (xy 135.73758 94.226441) (xy 135.895266 94.226441) (xy 135.895267 94.22644) - (xy 136.049919 94.195678) (xy 136.195601 94.135335) (xy 136.326711 94.04773) (xy 136.438211 93.93623) - (xy 136.525816 93.80512) (xy 136.586159 93.659438) (xy 136.616922 93.504783) (xy 136.616922 93.347099) - (xy 136.616922 93.347096) (xy 136.616921 93.347094) (xy 136.607271 93.29858) (xy 136.586159 93.192444) - (xy 136.576906 93.170104) (xy 136.525819 93.046768) (xy 136.525812 93.046755) (xy 136.452361 92.936828) - (xy 136.431483 92.87015) (xy 136.449968 92.80277) (xy 136.501946 92.75608) (xy 136.531269 92.74632) - (xy 136.680414 92.716654) (xy 136.826096 92.656311) (xy 136.957206 92.568706) (xy 137.068706 92.457206) - (xy 137.156311 92.326096) (xy 137.216654 92.180414) (xy 137.247417 92.025759) (xy 137.247417 91.868075) - (xy 137.247417 91.868072) (xy 137.247416 91.86807) (xy 137.23606 91.810981) (xy 137.216654 91.71342) - (xy 137.216652 91.713415) (xy 137.156314 91.567744) (xy 137.156307 91.567731) (xy 137.068706 91.436628) - (xy 137.068703 91.436624) (xy 136.957209 91.32513) (xy 136.957205 91.325127) (xy 136.826102 91.237526) - (xy 136.826089 91.237519) (xy 136.680418 91.177181) (xy 136.680406 91.177178) (xy 136.525762 91.146417) - (xy 136.525759 91.146417) (xy 136.368075 91.146417) (xy 136.368072 91.146417) (xy 136.213427 91.177178) - (xy 136.213415 91.177181) (xy 136.067744 91.237519) (xy 136.067731 91.237526) (xy 135.936628 91.325127) - (xy 135.936624 91.32513) (xy 135.82513 91.436624) (xy 135.825127 91.436628) (xy 135.737526 91.567731) - (xy 135.737519 91.567744) (xy 135.677181 91.713415) (xy 135.677178 91.713427) (xy 135.646417 91.86807) - (xy 135.646417 92.025763) (xy 135.677178 92.180406) (xy 135.677181 92.180418) (xy 135.737519 92.326089) - (xy 135.737526 92.326102) (xy 135.810977 92.436029) (xy 135.831855 92.502707) (xy 135.81337 92.570087) - (xy 135.761391 92.616777) (xy 135.732067 92.626537) (xy 135.58293 92.656202) (xy 135.58292 92.656205) - (xy 135.437249 92.716543) (xy 135.437236 92.71655) (xy 135.306133 92.804151) (xy 135.306129 92.804154) - (xy 135.194635 92.915648) (xy 135.194632 92.915652) (xy 135.107031 93.046755) (xy 135.107024 93.046768) - (xy 135.046686 93.192439) (xy 135.046683 93.192451) (xy 135.015922 93.347094) (xy 120.2505 93.347094) - (xy 120.2505 92.693995) (xy 121.049499 92.693995) (xy 121.076418 92.829322) (xy 121.076421 92.829332) - (xy 121.129221 92.956804) (xy 121.129228 92.956817) (xy 121.205885 93.071541) (xy 121.205888 93.071545) - (xy 121.303454 93.169111) (xy 121.303458 93.169114) (xy 121.418182 93.245771) (xy 121.418195 93.245778) - (xy 121.545667 93.298578) (xy 121.545672 93.29858) (xy 121.545676 93.29858) (xy 121.545677 93.298581) - (xy 121.681004 93.3255) (xy 121.681007 93.3255) (xy 121.818995 93.3255) (xy 121.910041 93.307389) - (xy 121.954328 93.29858) (xy 122.081811 93.245775) (xy 122.196542 93.169114) (xy 122.294114 93.071542) - (xy 122.370775 92.956811) (xy 122.42358 92.829328) (xy 122.43815 92.75608) (xy 122.4505 92.693995) - (xy 122.4505 92.556004) (xy 122.423581 92.420677) (xy 122.42358 92.420676) (xy 122.42358 92.420672) - (xy 122.412074 92.392894) (xy 122.370778 92.293195) (xy 122.370771 92.293182) (xy 122.294114 92.178458) - (xy 122.294111 92.178454) (xy 122.196545 92.080888) (xy 122.196541 92.080885) (xy 122.081817 92.004228) - (xy 122.081804 92.004221) (xy 121.954332 91.951421) (xy 121.954322 91.951418) (xy 121.818995 91.9245) - (xy 121.818993 91.9245) (xy 121.681007 91.9245) (xy 121.681005 91.9245) (xy 121.545677 91.951418) - (xy 121.545667 91.951421) (xy 121.418195 92.004221) (xy 121.418182 92.004228) (xy 121.303458 92.080885) - (xy 121.303454 92.080888) (xy 121.205888 92.178454) (xy 121.205885 92.178458) (xy 121.129228 92.293182) - (xy 121.129221 92.293195) (xy 121.076421 92.420667) (xy 121.076418 92.420677) (xy 121.0495 92.556004) - (xy 121.0495 92.556007) (xy 121.0495 92.693993) (xy 121.0495 92.693995) (xy 121.049499 92.693995) - (xy 120.2505 92.693995) (xy 120.2505 90.259388) (xy 123.287735 90.259388) (xy 123.287735 90.417081) - (xy 123.318496 90.571724) (xy 123.318499 90.571736) (xy 123.378837 90.717407) (xy 123.378844 90.71742) - (xy 123.466445 90.848523) (xy 123.466448 90.848527) (xy 123.577942 90.960021) (xy 123.577946 90.960024) - (xy 123.709049 91.047625) (xy 123.709062 91.047632) (xy 123.843804 91.103443) (xy 123.854738 91.107972) - (xy 124.009388 91.138734) (xy 124.009391 91.138735) (xy 124.009393 91.138735) (xy 124.167079 91.138735) - (xy 124.16708 91.138734) (xy 124.321732 91.107972) (xy 124.467414 91.047629) (xy 124.467419 91.047625) - (xy 124.467422 91.047624) (xy 124.501573 91.024805) (xy 124.56825 91.003926) (xy 124.635631 91.02241) - (xy 124.658146 91.040225) (xy 124.739707 91.121786) (xy 124.739711 91.121789) (xy 124.870814 91.20939) - (xy 124.870827 91.209397) (xy 125.016498 91.269735) (xy 125.016503 91.269737) (xy 125.171153 91.300499) - (xy 125.171156 91.3005) (xy 125.171158 91.3005) (xy 125.328844 91.3005) (xy 125.328845 91.300499) - (xy 125.483497 91.269737) (xy 125.629179 91.209394) (xy 125.760289 91.121789) (xy 125.871789 91.010289) - (xy 125.959394 90.879179) (xy 126.019737 90.733497) (xy 126.0505 90.578842) (xy 126.0505 90.421158) - (xy 126.0505 90.421155) (xy 126.050499 90.421153) (xy 126.042669 90.381789) (xy 126.019737 90.266503) - (xy 126.002174 90.224101) (xy 125.982673 90.177021) (xy 125.964702 90.133634) (xy 129.3995 90.133634) - (xy 129.3995 90.366365) (xy 129.399501 90.366382) (xy 129.427471 90.578842) (xy 129.429879 90.597126) + (xy 148.733497 91.07268) (xy 148.879179 91.012337) (xy 149.010289 90.924732) (xy 149.121789 90.813232) + (xy 149.209394 90.682122) (xy 149.269737 90.53644) (xy 149.290037 90.434388) (xy 149.29267 90.421153) + (xy 149.6995 90.421153) (xy 149.6995 90.578846) (xy 149.730261 90.733489) (xy 149.730264 90.733501) + (xy 149.790602 90.879172) (xy 149.790609 90.879185) (xy 149.87821 91.010288) (xy 149.878213 91.010292) + (xy 149.989707 91.121786) (xy 149.989711 91.121789) (xy 150.120814 91.20939) (xy 150.120827 91.209397) + (xy 150.266498 91.269735) (xy 150.266503 91.269737) (xy 150.421153 91.300499) (xy 150.421156 91.3005) + (xy 150.421158 91.3005) (xy 150.578844 91.3005) (xy 150.578845 91.300499) (xy 150.733497 91.269737) + (xy 150.879179 91.209394) (xy 151.010289 91.121789) (xy 151.121789 91.010289) (xy 151.209394 90.879179) + (xy 151.269737 90.733497) (xy 151.3005 90.578842) (xy 151.3005 90.421158) (xy 151.3005 90.421155) + (xy 151.300499 90.421153) (xy 151.297896 90.408068) (xy 151.269737 90.266503) (xy 151.252174 90.224101) + (xy 151.209397 90.120827) (xy 151.20939 90.120814) (xy 151.121789 89.989711) (xy 151.121786 89.989707) + (xy 151.010292 89.878213) (xy 151.010288 89.87821) (xy 150.879185 89.790609) (xy 150.879172 89.790602) + (xy 150.733501 89.730264) (xy 150.733489 89.730261) (xy 150.578845 89.6995) (xy 150.578842 89.6995) + (xy 150.421158 89.6995) (xy 150.421155 89.6995) (xy 150.26651 89.730261) (xy 150.266498 89.730264) + (xy 150.120827 89.790602) (xy 150.120814 89.790609) (xy 149.989711 89.87821) (xy 149.989707 89.878213) + (xy 149.878213 89.989707) (xy 149.87821 89.989711) (xy 149.790609 90.120814) (xy 149.790602 90.120827) + (xy 149.730264 90.266498) (xy 149.730261 90.26651) (xy 149.6995 90.421153) (xy 149.29267 90.421153) + (xy 149.298693 90.390874) (xy 149.3005 90.381787) (xy 149.3005 90.224098) (xy 149.300499 90.224096) + (xy 149.282505 90.133634) (xy 149.269737 90.069446) (xy 149.242192 90.002946) (xy 149.209397 89.92377) + (xy 149.20939 89.923757) (xy 149.121789 89.792654) (xy 149.121786 89.79265) (xy 149.010292 89.681156) + (xy 149.010288 89.681153) (xy 148.879185 89.593552) (xy 148.879172 89.593545) (xy 148.733501 89.533207) + (xy 148.733489 89.533204) (xy 148.578845 89.502443) (xy 148.578842 89.502443) (xy 148.421158 89.502443) + (xy 148.421155 89.502443) (xy 148.26651 89.533204) (xy 148.266498 89.533207) (xy 148.120827 89.593545) + (xy 148.120814 89.593552) (xy 147.989711 89.681153) (xy 147.989707 89.681156) (xy 147.878213 89.79265) + (xy 147.87821 89.792654) (xy 147.790609 89.923757) (xy 147.790602 89.92377) (xy 147.730264 90.069441) + (xy 147.730261 90.069453) (xy 147.6995 90.224096) (xy 145.6005 90.224096) (xy 145.6005 90.133628) + (xy 145.570121 89.902874) (xy 145.509882 89.67806) (xy 145.506918 89.670904) (xy 145.420819 89.463039) + (xy 145.420811 89.463023) (xy 145.304446 89.261475) (xy 145.304442 89.261468) (xy 145.211294 89.140075) + (xy 145.162757 89.07682) (xy 145.162751 89.076813) (xy 144.998186 88.912248) (xy 144.998179 88.912242) + (xy 144.81354 88.770564) (xy 144.813538 88.770562) (xy 144.813532 88.770558) (xy 144.813527 88.770555) + (xy 144.813524 88.770553) (xy 144.611976 88.654188) (xy 144.61196 88.65418) (xy 144.396947 88.56512) + (xy 144.192327 88.510292) (xy 144.172126 88.504879) (xy 144.172125 88.504878) (xy 144.172122 88.504878) + (xy 143.941382 88.474501) (xy 143.941377 88.4745) (xy 143.941372 88.4745) (xy 143.708628 88.4745) + (xy 143.708622 88.4745) (xy 143.708617 88.474501) (xy 143.477877 88.504878) (xy 143.253052 88.56512) + (xy 143.038039 88.65418) (xy 143.038023 88.654188) (xy 142.836475 88.770553) (xy 142.836459 88.770564) + (xy 142.65182 88.912242) (xy 142.651813 88.912248) (xy 142.487248 89.076813) (xy 142.487242 89.07682) + (xy 142.345564 89.261459) (xy 142.345553 89.261475) (xy 142.229188 89.463023) (xy 142.22918 89.463039) + (xy 142.14012 89.678052) (xy 142.079878 89.902877) (xy 142.049501 90.133617) (xy 142.0495 90.133634) + (xy 142.0495 90.366365) (xy 142.049501 90.366382) (xy 142.079214 90.592081) (xy 142.079879 90.597126) + (xy 142.137785 90.813235) (xy 142.14012 90.821947) (xy 142.22918 91.03696) (xy 142.229188 91.036976) + (xy 142.345553 91.238524) (xy 142.345564 91.23854) (xy 142.487242 91.423179) (xy 142.487248 91.423186) + (xy 142.651813 91.587751) (xy 142.651819 91.587756) (xy 142.836468 91.729442) (xy 142.836475 91.729446) + (xy 143.038023 91.845811) (xy 143.038039 91.845819) (xy 143.253052 91.934879) (xy 143.253054 91.934879) + (xy 143.25306 91.934882) (xy 143.477874 91.995121) (xy 143.708628 92.0255) (xy 143.708635 92.0255) + (xy 143.941365 92.0255) (xy 143.941372 92.0255) (xy 144.172126 91.995121) (xy 144.39694 91.934882) + (xy 144.558228 91.868075) (xy 144.61196 91.845819) (xy 144.611961 91.845817) (xy 144.611969 91.845815) + (xy 144.778478 91.74968) (xy 144.846375 91.733208) (xy 144.912402 91.75606) (xy 144.955593 91.810981) + (xy 144.962235 91.880534) (xy 144.940796 91.929951) (xy 144.925704 91.950724) (xy 144.816728 92.164598) + (xy 144.742549 92.392894) (xy 144.705 92.629974) (xy 144.705 92.870025) (xy 144.742549 93.107105) + (xy 144.816728 93.335401) (xy 144.925705 93.549277) (xy 144.989441 93.637003) (xy 144.989443 93.637003) + (xy 145.726624 92.899821) (xy 145.740778 92.952642) (xy 145.809896 93.072357) (xy 145.907643 93.170104) + (xy 146.027358 93.239222) (xy 146.080177 93.253375) (xy 145.310679 94.022871) (xy 145.288175 94.048654) + (xy 145.236204 94.086413) (xy 145.066416 94.256201) (xy 144.925276 94.450463) (xy 144.816265 94.664406) + (xy 144.742063 94.892777) (xy 144.7045 95.129941) (xy 144.7045 95.370058) (xy 144.742063 95.607222) + (xy 144.816265 95.835593) (xy 144.894791 95.989707) (xy 144.925276 96.049536) (xy 145.066414 96.243796) + (xy 145.066416 96.243798) (xy 145.234937 96.412319) (xy 145.268422 96.473642) (xy 145.263438 96.543334) + (xy 145.234937 96.587681) (xy 145.066416 96.756201) (xy 144.925276 96.950463) (xy 144.816265 97.164406) + (xy 144.743063 97.389699) (xy 144.742063 97.392778) (xy 144.7045 97.629941) (xy 144.7045 97.870059) + (xy 144.729874 98.030261) (xy 144.742063 98.107222) (xy 144.816265 98.335593) (xy 144.925278 98.54954) + (xy 144.93973 98.569431) (xy 144.963211 98.635237) (xy 144.947386 98.703291) (xy 144.897281 98.751986) + (xy 144.828803 98.765862) (xy 144.777413 98.749704) (xy 144.611976 98.654188) (xy 144.61196 98.65418) + (xy 144.396947 98.56512) (xy 144.172122 98.504878) (xy 143.941382 98.474501) (xy 143.941377 98.4745) + (xy 143.941372 98.4745) (xy 143.708628 98.4745) (xy 143.708622 98.4745) (xy 143.708617 98.474501) + (xy 143.477877 98.504878) (xy 143.253052 98.56512) (xy 143.038039 98.65418) (xy 143.038023 98.654188) + (xy 142.836475 98.770553) (xy 142.836459 98.770564) (xy 142.65182 98.912242) (xy 142.651813 98.912248) + (xy 142.487248 99.076813) (xy 142.487242 99.07682) (xy 142.345564 99.261459) (xy 142.345553 99.261475) + (xy 142.229188 99.463023) (xy 142.22918 99.463039) (xy 142.140121 99.678051) (xy 142.140121 99.678052) + (xy 142.140118 99.67806) (xy 142.126147 99.730201) (xy 142.108374 99.796528) (xy 142.072008 99.856188) + (xy 142.009161 99.886716) (xy 141.939785 99.878421) (xy 141.900918 99.852114) (xy 141.80894 99.760136) + (xy 141.808935 99.760132) (xy 141.710932 99.688929) (xy 141.668266 99.633599) (xy 141.662287 99.563986) + (xy 141.694892 99.502191) (xy 141.714926 99.485509) (xy 141.751118 99.461325) (xy 141.810289 99.421789) + (xy 141.921789 99.310289) (xy 142.009394 99.179179) (xy 142.015792 99.163734) (xy 142.037817 99.11056) + (xy 142.069737 99.033497) (xy 142.1005 98.878842) (xy 142.1005 98.721158) (xy 142.1005 98.721155) + (xy 142.100499 98.721153) (xy 142.083409 98.635237) (xy 142.069737 98.566503) (xy 142.044212 98.504879) + (xy 142.009397 98.420827) (xy 142.00939 98.420814) (xy 141.921789 98.289711) (xy 141.921786 98.289707) + (xy 141.810292 98.178213) (xy 141.810288 98.17821) (xy 141.679185 98.090609) (xy 141.679172 98.090602) + (xy 141.533501 98.030264) (xy 141.533489 98.030261) (xy 141.378845 97.9995) (xy 141.378842 97.9995) + (xy 141.221158 97.9995) (xy 141.221155 97.9995) (xy 141.06651 98.030261) (xy 141.066498 98.030264) + (xy 140.920827 98.090602) (xy 140.920814 98.090609) (xy 140.789711 98.17821) (xy 140.789707 98.178213) + (xy 140.678213 98.289707) (xy 140.67821 98.289711) (xy 140.590609 98.420814) (xy 140.590602 98.420827) + (xy 140.530264 98.566498) (xy 140.530261 98.56651) (xy 140.4995 98.721153) (xy 140.4995 98.878846) + (xy 140.530261 99.033489) (xy 140.530264 99.033501) (xy 140.590602 99.179172) (xy 140.590606 99.179179) + (xy 140.604018 99.199251) (xy 140.624896 99.265929) (xy 140.606412 99.333309) (xy 140.554434 99.379999) + (xy 140.520315 99.390616) (xy 140.369359 99.414526) (xy 140.126027 99.493588) (xy 140.126024 99.493589) + (xy 139.898049 99.60975) (xy 139.691064 99.760132) (xy 139.691059 99.760136) (xy 139.510136 99.941059) + (xy 139.510132 99.941064) (xy 139.35975 100.148049) (xy 139.243589 100.376024) (xy 139.243588 100.376027) + (xy 139.164526 100.619359) (xy 139.135317 100.803778) (xy 139.1245 100.87207) (xy 135.8755 100.87207) + (xy 135.835474 100.619361) (xy 135.795942 100.497693) (xy 135.756411 100.376027) (xy 135.75641 100.376024) + (xy 135.700609 100.26651) (xy 135.640252 100.148053) (xy 135.615364 100.113798) (xy 135.489867 99.941064) + (xy 135.489863 99.941059) (xy 135.30894 99.760136) (xy 135.308935 99.760132) (xy 135.10195 99.60975) + (xy 135.101949 99.609749) (xy 135.101947 99.609748) (xy 135.023421 99.569737) (xy 134.873975 99.493589) + (xy 134.873972 99.493588) (xy 134.63064 99.414526) (xy 134.47968 99.390616) (xy 134.37793 99.3745) + (xy 134.12207 99.3745) (xy 134.037833 99.387842) (xy 133.869359 99.414526) (xy 133.626027 99.493588) + (xy 133.626024 99.493589) (xy 133.398049 99.60975) (xy 133.191065 99.760131) (xy 133.09908 99.852116) + (xy 133.037756 99.8856) (xy 132.968065 99.880616) (xy 132.912131 99.838744) (xy 132.891626 99.796532) + (xy 132.859882 99.67806) (xy 132.859879 99.678052) (xy 132.770819 99.463039) (xy 132.770811 99.463023) + (xy 132.654446 99.261475) (xy 132.654442 99.261468) (xy 132.538647 99.110561) (xy 132.512757 99.07682) + (xy 132.512751 99.076813) (xy 132.348186 98.912248) (xy 132.348179 98.912242) (xy 132.16354 98.770564) + (xy 132.163538 98.770562) (xy 132.163532 98.770558) (xy 132.163527 98.770555) (xy 132.163524 98.770553) + (xy 131.961976 98.654188) (xy 131.96196 98.65418) (xy 131.746947 98.56512) (xy 131.522122 98.504878) + (xy 131.291382 98.474501) (xy 131.291377 98.4745) (xy 131.291372 98.4745) (xy 131.058628 98.4745) + (xy 131.058622 98.4745) (xy 131.058617 98.474501) (xy 130.827877 98.504878) (xy 130.603052 98.56512) + (xy 130.388039 98.65418) (xy 130.388023 98.654188) (xy 130.186475 98.770553) (xy 130.186459 98.770564) + (xy 130.00182 98.912242) (xy 130.001813 98.912248) (xy 129.837248 99.076813) (xy 129.837242 99.07682) + (xy 129.695564 99.261459) (xy 129.695553 99.261475) (xy 129.579188 99.463023) (xy 129.57918 99.463039) + (xy 129.49012 99.678052) (xy 129.490118 99.67806) (xy 129.478265 99.722298) (xy 129.476147 99.730201) + (xy 129.439782 99.789861) (xy 129.376934 99.82039) (xy 129.307559 99.812095) (xy 129.253681 99.76761) + (xy 129.234755 99.722298) (xy 129.225953 99.678051) (xy 129.219737 99.6468) (xy 129.162822 99.509394) + (xy 129.159397 99.501124) (xy 129.15939 99.501111) (xy 129.071789 99.370008) (xy 129.071786 99.370004) + (xy 128.960292 99.25851) (xy 128.960288 99.258507) (xy 128.829185 99.170906) (xy 128.829172 99.170899) + (xy 128.683501 99.110561) (xy 128.683489 99.110558) (xy 128.528845 99.079797) (xy 128.528842 99.079797) + (xy 128.371158 99.079797) (xy 128.371155 99.079797) (xy 128.21651 99.110558) (xy 128.216498 99.110561) + (xy 128.070827 99.170899) (xy 128.070814 99.170906) (xy 127.939711 99.258507) (xy 127.939707 99.25851) + (xy 127.828213 99.370004) (xy 127.82821 99.370008) (xy 127.740609 99.501111) (xy 127.740602 99.501124) + (xy 127.680264 99.646795) (xy 127.680261 99.646807) (xy 127.6495 99.80145) (xy 125.849075 99.80145) + (xy 125.719997 99.715202) (xy 125.719984 99.715195) (xy 125.574313 99.654857) (xy 125.574301 99.654854) + (xy 125.419657 99.624093) (xy 125.419654 99.624093) (xy 125.26197 99.624093) (xy 125.261967 99.624093) + (xy 125.107322 99.654854) (xy 125.10731 99.654857) (xy 124.96164 99.715195) (xy 124.961626 99.715203) + (xy 124.915517 99.746011) (xy 124.848839 99.766887) (xy 124.799177 99.757468) (xy 124.733498 99.730263) + (xy 124.733488 99.73026) (xy 124.578845 99.6995) (xy 124.578842 99.6995) (xy 124.421158 99.6995) + (xy 124.421155 99.6995) (xy 124.26651 99.730261) (xy 124.266498 99.730264) (xy 124.120827 99.790602) + (xy 124.120814 99.790609) (xy 123.989711 99.87821) (xy 123.989707 99.878213) (xy 123.878213 99.989707) + (xy 123.87821 99.989711) (xy 123.790609 100.120814) (xy 123.790602 100.120827) (xy 123.730264 100.266498) + (xy 123.730261 100.26651) (xy 123.6995 100.421153) (xy 120.2505 100.421153) (xy 120.2505 98.468995) + (xy 121.049499 98.468995) (xy 121.076418 98.604322) (xy 121.076421 98.604332) (xy 121.129221 98.731804) + (xy 121.129228 98.731817) (xy 121.205885 98.846541) (xy 121.205888 98.846545) (xy 121.303454 98.944111) + (xy 121.303458 98.944114) (xy 121.418182 99.020771) (xy 121.418195 99.020778) (xy 121.500149 99.054724) + (xy 121.545672 99.07358) (xy 121.545676 99.07358) (xy 121.545677 99.073581) (xy 121.681004 99.1005) + (xy 121.681007 99.1005) (xy 121.818995 99.1005) (xy 121.923073 99.079797) (xy 121.954328 99.07358) + (xy 122.081811 99.020775) (xy 122.196542 98.944114) (xy 122.294114 98.846542) (xy 122.370775 98.731811) + (xy 122.42358 98.604328) (xy 122.443362 98.504878) (xy 122.4505 98.468995) (xy 122.4505 98.331004) + (xy 122.423581 98.195677) (xy 122.42358 98.195676) (xy 122.42358 98.195672) (xy 122.416348 98.178213) + (xy 122.370778 98.068195) (xy 122.370771 98.068182) (xy 122.294114 97.953458) (xy 122.294111 97.953454) + (xy 122.196545 97.855888) (xy 122.196541 97.855885) (xy 122.081817 97.779228) (xy 122.081804 97.779221) + (xy 121.954332 97.726421) (xy 121.954322 97.726418) (xy 121.818995 97.6995) (xy 121.818993 97.6995) + (xy 121.681007 97.6995) (xy 121.681005 97.6995) (xy 121.545677 97.726418) (xy 121.545667 97.726421) + (xy 121.418195 97.779221) (xy 121.418182 97.779228) (xy 121.303458 97.855885) (xy 121.303454 97.855888) + (xy 121.205888 97.953454) (xy 121.205885 97.953458) (xy 121.129228 98.068182) (xy 121.129221 98.068195) + (xy 121.076421 98.195667) (xy 121.076418 98.195677) (xy 121.0495 98.331004) (xy 121.0495 98.331007) + (xy 121.0495 98.468993) (xy 121.0495 98.468995) (xy 121.049499 98.468995) (xy 120.2505 98.468995) + (xy 120.2505 94.321153) (xy 132.4995 94.321153) (xy 132.4995 94.478846) (xy 132.530261 94.633489) + (xy 132.530264 94.633501) (xy 132.590602 94.779172) (xy 132.590609 94.779185) (xy 132.67821 94.910288) + (xy 132.678213 94.910292) (xy 132.789707 95.021786) (xy 132.789711 95.021789) (xy 132.920814 95.10939) + (xy 132.920827 95.109397) (xy 133.066498 95.169735) (xy 133.066503 95.169737) (xy 133.221153 95.200499) + (xy 133.221156 95.2005) (xy 133.221158 95.2005) (xy 133.378844 95.2005) (xy 133.378845 95.200499) + (xy 133.533497 95.169737) (xy 133.679179 95.109394) (xy 133.810289 95.021789) (xy 133.921789 94.910289) + (xy 134.009394 94.779179) (xy 134.069737 94.633497) (xy 134.1005 94.478842) (xy 134.1005 94.321158) + (xy 134.1005 94.321155) (xy 134.100499 94.321153) (xy 134.081659 94.22644) (xy 134.069737 94.166503) + (xy 134.036564 94.086416) (xy 134.009397 94.020827) (xy 134.00939 94.020814) (xy 133.921789 93.889711) + (xy 133.921786 93.889707) (xy 133.810292 93.778213) (xy 133.810288 93.77821) (xy 133.679185 93.690609) + (xy 133.679172 93.690602) (xy 133.533501 93.630264) (xy 133.533489 93.630261) (xy 133.378845 93.5995) + (xy 133.378842 93.5995) (xy 133.221158 93.5995) (xy 133.221155 93.5995) (xy 133.06651 93.630261) + (xy 133.066498 93.630264) (xy 132.920827 93.690602) (xy 132.920814 93.690609) (xy 132.789711 93.77821) + (xy 132.789707 93.778213) (xy 132.678213 93.889707) (xy 132.67821 93.889711) (xy 132.590609 94.020814) + (xy 132.590602 94.020827) (xy 132.530264 94.166498) (xy 132.530261 94.16651) (xy 132.4995 94.321153) + (xy 120.2505 94.321153) (xy 120.2505 93.347094) (xy 135.015922 93.347094) (xy 135.015922 93.504787) + (xy 135.046683 93.65943) (xy 135.046686 93.659442) (xy 135.107024 93.805113) (xy 135.107031 93.805126) + (xy 135.194632 93.936229) (xy 135.194635 93.936233) (xy 135.306129 94.047727) (xy 135.306133 94.04773) + (xy 135.437236 94.135331) (xy 135.437249 94.135338) (xy 135.58292 94.195676) (xy 135.582925 94.195678) + (xy 135.737575 94.22644) (xy 135.737578 94.226441) (xy 135.73758 94.226441) (xy 135.895266 94.226441) + (xy 135.895267 94.22644) (xy 136.049919 94.195678) (xy 136.195601 94.135335) (xy 136.326711 94.04773) + (xy 136.438211 93.93623) (xy 136.525816 93.80512) (xy 136.586159 93.659438) (xy 136.616922 93.504783) + (xy 136.616922 93.347099) (xy 136.616922 93.347096) (xy 136.616921 93.347094) (xy 136.607271 93.29858) + (xy 136.586159 93.192444) (xy 136.576906 93.170104) (xy 136.525819 93.046768) (xy 136.525812 93.046755) + (xy 136.452361 92.936828) (xy 136.431483 92.87015) (xy 136.449968 92.80277) (xy 136.501946 92.75608) + (xy 136.531269 92.74632) (xy 136.680414 92.716654) (xy 136.826096 92.656311) (xy 136.957206 92.568706) + (xy 137.068706 92.457206) (xy 137.156311 92.326096) (xy 137.216654 92.180414) (xy 137.247417 92.025759) + (xy 137.247417 91.868075) (xy 137.247417 91.868072) (xy 137.247416 91.86807) (xy 137.23606 91.810981) + (xy 137.216654 91.71342) (xy 137.216652 91.713415) (xy 137.156314 91.567744) (xy 137.156307 91.567731) + (xy 137.068706 91.436628) (xy 137.068703 91.436624) (xy 136.957209 91.32513) (xy 136.957205 91.325127) + (xy 136.826102 91.237526) (xy 136.826089 91.237519) (xy 136.680418 91.177181) (xy 136.680406 91.177178) + (xy 136.525762 91.146417) (xy 136.525759 91.146417) (xy 136.368075 91.146417) (xy 136.368072 91.146417) + (xy 136.213427 91.177178) (xy 136.213415 91.177181) (xy 136.067744 91.237519) (xy 136.067731 91.237526) + (xy 135.936628 91.325127) (xy 135.936624 91.32513) (xy 135.82513 91.436624) (xy 135.825127 91.436628) + (xy 135.737526 91.567731) (xy 135.737519 91.567744) (xy 135.677181 91.713415) (xy 135.677178 91.713427) + (xy 135.646417 91.86807) (xy 135.646417 92.025763) (xy 135.677178 92.180406) (xy 135.677181 92.180418) + (xy 135.737519 92.326089) (xy 135.737526 92.326102) (xy 135.810977 92.436029) (xy 135.831855 92.502707) + (xy 135.81337 92.570087) (xy 135.761391 92.616777) (xy 135.732067 92.626537) (xy 135.58293 92.656202) + (xy 135.58292 92.656205) (xy 135.437249 92.716543) (xy 135.437236 92.71655) (xy 135.306133 92.804151) + (xy 135.306129 92.804154) (xy 135.194635 92.915648) (xy 135.194632 92.915652) (xy 135.107031 93.046755) + (xy 135.107024 93.046768) (xy 135.046686 93.192439) (xy 135.046683 93.192451) (xy 135.015922 93.347094) + (xy 120.2505 93.347094) (xy 120.2505 92.693995) (xy 121.049499 92.693995) (xy 121.076418 92.829322) + (xy 121.076421 92.829332) (xy 121.129221 92.956804) (xy 121.129228 92.956817) (xy 121.205885 93.071541) + (xy 121.205888 93.071545) (xy 121.303454 93.169111) (xy 121.303458 93.169114) (xy 121.418182 93.245771) + (xy 121.418195 93.245778) (xy 121.545667 93.298578) (xy 121.545672 93.29858) (xy 121.545676 93.29858) + (xy 121.545677 93.298581) (xy 121.681004 93.3255) (xy 121.681007 93.3255) (xy 121.818995 93.3255) + (xy 121.910041 93.307389) (xy 121.954328 93.29858) (xy 122.081811 93.245775) (xy 122.196542 93.169114) + (xy 122.294114 93.071542) (xy 122.370775 92.956811) (xy 122.42358 92.829328) (xy 122.43815 92.75608) + (xy 122.4505 92.693995) (xy 122.4505 92.556004) (xy 122.423581 92.420677) (xy 122.42358 92.420676) + (xy 122.42358 92.420672) (xy 122.412074 92.392894) (xy 122.370778 92.293195) (xy 122.370771 92.293182) + (xy 122.294114 92.178458) (xy 122.294111 92.178454) (xy 122.196545 92.080888) (xy 122.196541 92.080885) + (xy 122.081817 92.004228) (xy 122.081804 92.004221) (xy 121.954332 91.951421) (xy 121.954322 91.951418) + (xy 121.818995 91.9245) (xy 121.818993 91.9245) (xy 121.681007 91.9245) (xy 121.681005 91.9245) + (xy 121.545677 91.951418) (xy 121.545667 91.951421) (xy 121.418195 92.004221) (xy 121.418182 92.004228) + (xy 121.303458 92.080885) (xy 121.303454 92.080888) (xy 121.205888 92.178454) (xy 121.205885 92.178458) + (xy 121.129228 92.293182) (xy 121.129221 92.293195) (xy 121.076421 92.420667) (xy 121.076418 92.420677) + (xy 121.0495 92.556004) (xy 121.0495 92.556007) (xy 121.0495 92.693993) (xy 121.0495 92.693995) + (xy 121.049499 92.693995) (xy 120.2505 92.693995) (xy 120.2505 90.434388) (xy 123.287735 90.434388) + (xy 123.287735 90.592081) (xy 123.318496 90.746724) (xy 123.318499 90.746736) (xy 123.378837 90.892407) + (xy 123.378844 90.89242) (xy 123.466445 91.023523) (xy 123.466448 91.023527) (xy 123.577942 91.135021) + (xy 123.577946 91.135024) (xy 123.709049 91.222625) (xy 123.709062 91.222632) (xy 123.822788 91.269738) + (xy 123.854738 91.282972) (xy 123.942852 91.300499) (xy 124.009388 91.313734) (xy 124.009391 91.313735) + (xy 124.009393 91.313735) (xy 124.167079 91.313735) (xy 124.16708 91.313734) (xy 124.321732 91.282972) + (xy 124.467414 91.222629) (xy 124.598524 91.135024) (xy 124.710024 91.023524) (xy 124.797629 90.892414) + (xy 124.857972 90.746732) (xy 124.873816 90.667075) (xy 124.9062 90.605167) (xy 124.966916 90.570593) + (xy 125.036685 90.574332) (xy 125.093357 90.615198) (xy 125.11705 90.667076) (xy 125.130261 90.733492) + (xy 125.130264 90.733501) (xy 125.190602 90.879172) (xy 125.190609 90.879185) (xy 125.27821 91.010288) + (xy 125.278213 91.010292) (xy 125.389707 91.121786) (xy 125.389711 91.121789) (xy 125.520814 91.20939) + (xy 125.520827 91.209397) (xy 125.666498 91.269735) (xy 125.666503 91.269737) (xy 125.821153 91.300499) + (xy 125.821156 91.3005) (xy 125.821158 91.3005) (xy 125.978844 91.3005) (xy 125.978845 91.300499) + (xy 126.133497 91.269737) (xy 126.279179 91.209394) (xy 126.410289 91.121789) (xy 126.521789 91.010289) + (xy 126.609394 90.879179) (xy 126.669737 90.733497) (xy 126.7005 90.578842) (xy 126.7005 90.421158) + (xy 126.7005 90.421155) (xy 126.700499 90.421153) (xy 126.697896 90.408068) (xy 126.669737 90.266503) + (xy 126.652174 90.224101) (xy 126.632673 90.177021) (xy 126.614702 90.133634) (xy 129.3995 90.133634) + (xy 129.3995 90.366365) (xy 129.399501 90.366382) (xy 129.429214 90.592081) (xy 129.429879 90.597126) (xy 129.487785 90.813235) (xy 129.49012 90.821947) (xy 129.57918 91.03696) (xy 129.579188 91.036976) (xy 129.695553 91.238524) (xy 129.695564 91.23854) (xy 129.837242 91.423179) (xy 129.837248 91.423186) (xy 130.001813 91.587751) (xy 130.001819 91.587756) (xy 130.186468 91.729442) (xy 130.186475 91.729446) @@ -40075,26 +40799,25 @@ (xy 131.291365 92.0255) (xy 131.291372 92.0255) (xy 131.522126 91.995121) (xy 131.74694 91.934882) (xy 131.908228 91.868075) (xy 131.96196 91.845819) (xy 131.961963 91.845817) (xy 131.961969 91.845815) (xy 132.163532 91.729442) (xy 132.348181 91.587756) (xy 132.512756 91.423181) (xy 132.654442 91.238532) - (xy 132.770815 91.036969) (xy 132.775854 91.024805) (xy 132.859879 90.821947) (xy 132.859878 90.821947) + (xy 132.770815 91.036969) (xy 132.776385 91.023523) (xy 132.859879 90.821947) (xy 132.859878 90.821947) (xy 132.859882 90.82194) (xy 132.920121 90.597126) (xy 132.9505 90.366372) (xy 132.9505 90.133628) - (xy 132.920121 89.902874) (xy 132.859882 89.67806) (xy 132.859879 89.678052) (xy 132.770819 89.463039) - (xy 132.770814 89.46303) (xy 132.721183 89.377067) (xy 132.721182 89.377065) (xy 132.688901 89.321153) - (xy 135.4995 89.321153) (xy 135.4995 89.478846) (xy 135.530261 89.633489) (xy 135.530264 89.633501) - (xy 135.590602 89.779172) (xy 135.590609 89.779185) (xy 135.67821 89.910288) (xy 135.678213 89.910292) - (xy 135.789707 90.021786) (xy 135.789711 90.021789) (xy 135.920814 90.10939) (xy 135.920827 90.109397) - (xy 136.066498 90.169735) (xy 136.066503 90.169737) (xy 136.221153 90.200499) (xy 136.221156 90.2005) - (xy 136.221158 90.2005) (xy 136.378844 90.2005) (xy 136.378845 90.200499) (xy 136.533497 90.169737) - (xy 136.651592 90.120821) (xy 136.679172 90.109397) (xy 136.679172 90.109396) (xy 136.679179 90.109394) - (xy 136.810289 90.021789) (xy 136.921789 89.910289) (xy 137.009394 89.779179) (xy 137.069737 89.633497) - (xy 137.072193 89.621153) (xy 139.5995 89.621153) (xy 139.5995 89.778846) (xy 139.630261 89.933489) - (xy 139.630264 89.933501) (xy 139.690602 90.079172) (xy 139.690609 90.079185) (xy 139.77821 90.210288) - (xy 139.778213 90.210292) (xy 139.889707 90.321786) (xy 139.889711 90.321789) (xy 140.020814 90.40939) - (xy 140.020827 90.409397) (xy 140.166498 90.469735) (xy 140.166503 90.469737) (xy 140.321153 90.500499) - (xy 140.321156 90.5005) (xy 140.321158 90.5005) (xy 140.478844 90.5005) (xy 140.478845 90.500499) - (xy 140.633497 90.469737) (xy 140.760621 90.417081) (xy 140.779172 90.409397) (xy 140.779172 90.409396) + (xy 132.920121 89.902874) (xy 132.859882 89.67806) (xy 132.856918 89.670904) (xy 132.770819 89.463039) + (xy 132.770814 89.46303) (xy 132.757757 89.440414) (xy 132.688901 89.321153) (xy 135.4995 89.321153) + (xy 135.4995 89.478846) (xy 135.530261 89.633489) (xy 135.530264 89.633501) (xy 135.590602 89.779172) + (xy 135.590609 89.779185) (xy 135.67821 89.910288) (xy 135.678213 89.910292) (xy 135.789707 90.021786) + (xy 135.789711 90.021789) (xy 135.920814 90.10939) (xy 135.920827 90.109397) (xy 136.066498 90.169735) + (xy 136.066503 90.169737) (xy 136.221153 90.200499) (xy 136.221156 90.2005) (xy 136.221158 90.2005) + (xy 136.378844 90.2005) (xy 136.378845 90.200499) (xy 136.533497 90.169737) (xy 136.651592 90.120821) + (xy 136.679172 90.109397) (xy 136.679172 90.109396) (xy 136.679179 90.109394) (xy 136.810289 90.021789) + (xy 136.921789 89.910289) (xy 137.009394 89.779179) (xy 137.069737 89.633497) (xy 137.072193 89.621153) + (xy 139.5995 89.621153) (xy 139.5995 89.778846) (xy 139.630261 89.933489) (xy 139.630264 89.933501) + (xy 139.690602 90.079172) (xy 139.690609 90.079185) (xy 139.77821 90.210288) (xy 139.778213 90.210292) + (xy 139.889707 90.321786) (xy 139.889711 90.321789) (xy 140.020814 90.40939) (xy 140.020827 90.409397) + (xy 140.101089 90.442642) (xy 140.166503 90.469737) (xy 140.321153 90.500499) (xy 140.321156 90.5005) + (xy 140.321158 90.5005) (xy 140.478844 90.5005) (xy 140.478845 90.500499) (xy 140.633497 90.469737) (xy 140.779179 90.409394) (xy 140.910289 90.321789) (xy 141.021789 90.210289) (xy 141.109394 90.079179) (xy 141.169737 89.933497) (xy 141.2005 89.778842) (xy 141.2005 89.621158) (xy 141.2005 89.621155) - (xy 141.200499 89.621153) (xy 141.172192 89.478846) (xy 141.169737 89.466503) (xy 141.168299 89.463031) + (xy 141.200499 89.621153) (xy 141.194476 89.590873) (xy 141.169737 89.466503) (xy 141.168299 89.463031) (xy 141.109397 89.320827) (xy 141.10939 89.320814) (xy 141.021789 89.189711) (xy 141.021786 89.189707) (xy 140.910292 89.078213) (xy 140.910288 89.07821) (xy 140.779185 88.990609) (xy 140.779172 88.990602) (xy 140.633501 88.930264) (xy 140.633489 88.930261) (xy 140.478845 88.8995) (xy 140.478842 88.8995) @@ -40104,85 +40827,92 @@ (xy 139.630264 89.466498) (xy 139.630261 89.46651) (xy 139.5995 89.621153) (xy 137.072193 89.621153) (xy 137.077683 89.593552) (xy 137.078216 89.590874) (xy 137.078216 89.590873) (xy 137.100499 89.478846) (xy 137.1005 89.478844) (xy 137.1005 89.321155) (xy 137.100499 89.321153) (xy 137.074353 89.189711) - (xy 137.069737 89.166503) (xy 137.069735 89.166498) (xy 137.009397 89.020827) (xy 137.00939 89.020814) + (xy 137.069737 89.166503) (xy 137.05879 89.140075) (xy 137.009397 89.020827) (xy 137.00939 89.020814) (xy 136.921789 88.889711) (xy 136.921786 88.889707) (xy 136.810292 88.778213) (xy 136.810288 88.77821) (xy 136.679185 88.690609) (xy 136.679172 88.690602) (xy 136.533501 88.630264) (xy 136.533489 88.630261) (xy 136.378845 88.5995) (xy 136.378842 88.5995) (xy 136.221158 88.5995) (xy 136.221155 88.5995) (xy 136.06651 88.630261) (xy 136.066498 88.630264) (xy 135.920827 88.690602) (xy 135.920814 88.690609) (xy 135.789711 88.77821) (xy 135.789707 88.778213) (xy 135.678213 88.889707) (xy 135.67821 88.889711) (xy 135.590609 89.020814) (xy 135.590602 89.020827) (xy 135.530264 89.166498) (xy 135.530261 89.16651) - (xy 135.4995 89.321153) (xy 132.688901 89.321153) (xy 132.688709 89.320821) (xy 132.654442 89.261468) - (xy 132.513824 89.078211) (xy 132.512757 89.07682) (xy 132.512751 89.076813) (xy 132.348186 88.912248) - (xy 132.348179 88.912242) (xy 132.16354 88.770564) (xy 132.163538 88.770562) (xy 132.163532 88.770558) - (xy 132.163527 88.770555) (xy 132.163524 88.770553) (xy 131.961976 88.654188) (xy 131.96196 88.65418) - (xy 131.746947 88.56512) (xy 131.542327 88.510292) (xy 131.522126 88.504879) (xy 131.522125 88.504878) - (xy 131.522122 88.504878) (xy 131.291382 88.474501) (xy 131.291377 88.4745) (xy 131.291372 88.4745) - (xy 131.058628 88.4745) (xy 131.058622 88.4745) (xy 131.058617 88.474501) (xy 130.827877 88.504878) - (xy 130.603052 88.56512) (xy 130.388039 88.65418) (xy 130.388023 88.654188) (xy 130.186475 88.770553) - (xy 130.186459 88.770564) (xy 130.00182 88.912242) (xy 130.001813 88.912248) (xy 129.837248 89.076813) - (xy 129.837242 89.07682) (xy 129.695564 89.261459) (xy 129.695553 89.261475) (xy 129.579188 89.463023) - (xy 129.57918 89.463039) (xy 129.49012 89.678052) (xy 129.429878 89.902877) (xy 129.399501 90.133617) - (xy 129.3995 90.133634) (xy 125.964702 90.133634) (xy 125.959397 90.120827) (xy 125.95939 90.120814) - (xy 125.871789 89.989711) (xy 125.871786 89.989707) (xy 125.760292 89.878213) (xy 125.760288 89.87821) - (xy 125.629185 89.790609) (xy 125.629172 89.790602) (xy 125.483501 89.730264) (xy 125.483489 89.730261) - (xy 125.328845 89.6995) (xy 125.328842 89.6995) (xy 125.171158 89.6995) (xy 125.171155 89.6995) - (xy 125.01651 89.730261) (xy 125.016498 89.730264) (xy 124.870828 89.790602) (xy 124.870814 89.79061) - (xy 124.836657 89.813432) (xy 124.769979 89.834308) (xy 124.702599 89.815822) (xy 124.680088 89.798009) - (xy 124.598527 89.716448) (xy 124.598523 89.716445) (xy 124.46742 89.628844) (xy 124.467407 89.628837) - (xy 124.321736 89.568499) (xy 124.321724 89.568496) (xy 124.16708 89.537735) (xy 124.167077 89.537735) - (xy 124.009393 89.537735) (xy 124.00939 89.537735) (xy 123.854745 89.568496) (xy 123.854733 89.568499) - (xy 123.709062 89.628837) (xy 123.709049 89.628844) (xy 123.577946 89.716445) (xy 123.577942 89.716448) - (xy 123.466448 89.827942) (xy 123.466445 89.827946) (xy 123.378844 89.959049) (xy 123.378837 89.959062) - (xy 123.318499 90.104733) (xy 123.318496 90.104745) (xy 123.287735 90.259388) (xy 120.2505 90.259388) - (xy 120.2505 88.443995) (xy 121.049499 88.443995) (xy 121.076418 88.579322) (xy 121.076421 88.579332) - (xy 121.129221 88.706804) (xy 121.129228 88.706817) (xy 121.205885 88.821541) (xy 121.205888 88.821545) - (xy 121.303454 88.919111) (xy 121.303458 88.919114) (xy 121.418182 88.995771) (xy 121.418195 88.995778) - (xy 121.545667 89.048578) (xy 121.545672 89.04858) (xy 121.545676 89.04858) (xy 121.545677 89.048581) - (xy 121.681004 89.0755) (xy 121.681007 89.0755) (xy 121.818995 89.0755) (xy 121.910041 89.057389) - (xy 121.954328 89.04858) (xy 122.081811 88.995775) (xy 122.196542 88.919114) (xy 122.294114 88.821542) - (xy 122.370775 88.706811) (xy 122.42358 88.579328) (xy 122.443501 88.479179) (xy 122.4505 88.443995) - (xy 122.4505 88.306004) (xy 122.423581 88.170677) (xy 122.42358 88.170676) (xy 122.42358 88.170672) - (xy 122.402482 88.119737) (xy 122.378782 88.062518) (xy 122.370776 88.043192) (xy 122.370775 88.043189) - (xy 122.370773 88.043186) (xy 122.370771 88.043182) (xy 122.356052 88.021153) (xy 123.7995 88.021153) - (xy 123.7995 88.178846) (xy 123.830261 88.333489) (xy 123.830264 88.333501) (xy 123.890602 88.479172) - (xy 123.890609 88.479185) (xy 123.97821 88.610288) (xy 123.978213 88.610292) (xy 124.089707 88.721786) - (xy 124.089711 88.721789) (xy 124.220814 88.80939) (xy 124.220827 88.809397) (xy 124.366498 88.869735) - (xy 124.366503 88.869737) (xy 124.516131 88.8995) (xy 124.521153 88.900499) (xy 124.521156 88.9005) - (xy 124.521158 88.9005) (xy 124.678844 88.9005) (xy 124.678845 88.900499) (xy 124.833497 88.869737) - (xy 124.979179 88.809394) (xy 125.110289 88.721789) (xy 125.221789 88.610289) (xy 125.309394 88.479179) - (xy 125.369737 88.333497) (xy 125.4005 88.178842) (xy 125.4005 88.021158) (xy 125.4005 88.021155) - (xy 125.400499 88.021153) (xy 125.390679 87.971786) (xy 125.369737 87.866503) (xy 125.352431 87.824723) - (xy 125.309397 87.720827) (xy 125.30939 87.720814) (xy 125.221789 87.589711) (xy 125.221786 87.589707) - (xy 125.110292 87.478213) (xy 125.110288 87.47821) (xy 124.979185 87.390609) (xy 124.979173 87.390602) - (xy 124.952674 87.379627) (xy 124.833501 87.330264) (xy 124.833489 87.330261) (xy 124.678845 87.2995) - (xy 124.678842 87.2995) (xy 124.521158 87.2995) (xy 124.521155 87.2995) (xy 124.36651 87.330261) - (xy 124.366498 87.330264) (xy 124.220827 87.390602) (xy 124.220814 87.390609) (xy 124.089711 87.47821) - (xy 124.089707 87.478213) (xy 123.978213 87.589707) (xy 123.97821 87.589711) (xy 123.890609 87.720814) - (xy 123.890602 87.720827) (xy 123.830264 87.866498) (xy 123.830261 87.86651) (xy 123.7995 88.021153) - (xy 122.356052 88.021153) (xy 122.294114 87.928458) (xy 122.294111 87.928454) (xy 122.196545 87.830888) + (xy 135.4995 89.321153) (xy 132.688901 89.321153) (xy 132.654442 89.261468) (xy 132.561294 89.140075) + (xy 132.512757 89.07682) (xy 132.512751 89.076813) (xy 132.348186 88.912248) (xy 132.348179 88.912242) + (xy 132.16354 88.770564) (xy 132.163538 88.770562) (xy 132.163532 88.770558) (xy 132.163527 88.770555) + (xy 132.163524 88.770553) (xy 131.961976 88.654188) (xy 131.96196 88.65418) (xy 131.746947 88.56512) + (xy 131.542327 88.510292) (xy 131.522126 88.504879) (xy 131.522125 88.504878) (xy 131.522122 88.504878) + (xy 131.291382 88.474501) (xy 131.291377 88.4745) (xy 131.291372 88.4745) (xy 131.058628 88.4745) + (xy 131.058622 88.4745) (xy 131.058617 88.474501) (xy 130.827877 88.504878) (xy 130.603052 88.56512) + (xy 130.388039 88.65418) (xy 130.388023 88.654188) (xy 130.186475 88.770553) (xy 130.186459 88.770564) + (xy 130.00182 88.912242) (xy 130.001813 88.912248) (xy 129.837248 89.076813) (xy 129.837242 89.07682) + (xy 129.695564 89.261459) (xy 129.695553 89.261475) (xy 129.579188 89.463023) (xy 129.57918 89.463039) + (xy 129.49012 89.678052) (xy 129.429878 89.902877) (xy 129.399501 90.133617) (xy 129.3995 90.133634) + (xy 126.614702 90.133634) (xy 126.609397 90.120827) (xy 126.60939 90.120814) (xy 126.521789 89.989711) + (xy 126.521786 89.989707) (xy 126.410292 89.878213) (xy 126.410288 89.87821) (xy 126.279185 89.790609) + (xy 126.279172 89.790602) (xy 126.133501 89.730264) (xy 126.133489 89.730261) (xy 125.978845 89.6995) + (xy 125.978842 89.6995) (xy 125.821158 89.6995) (xy 125.821155 89.6995) (xy 125.66651 89.730261) + (xy 125.666498 89.730264) (xy 125.520827 89.790602) (xy 125.520814 89.790609) (xy 125.389711 89.87821) + (xy 125.389707 89.878213) (xy 125.278213 89.989707) (xy 125.27821 89.989711) (xy 125.190609 90.120814) + (xy 125.190602 90.120827) (xy 125.130264 90.266498) (xy 125.130261 90.266508) (xy 125.114418 90.346157) + (xy 125.082033 90.408068) (xy 125.021317 90.442642) (xy 124.951547 90.438901) (xy 124.894876 90.398035) + (xy 124.871184 90.346156) (xy 124.857973 90.279745) (xy 124.857972 90.279738) (xy 124.834927 90.224101) + (xy 124.797632 90.134062) (xy 124.797625 90.134049) (xy 124.733191 90.037617) (xy 124.712313 89.970939) + (xy 124.730798 89.903559) (xy 124.782776 89.856869) (xy 124.812102 89.847109) (xy 124.842633 89.841035) + (xy 124.893256 89.830966) (xy 125.019091 89.778844) (xy 125.038931 89.770626) (xy 125.038931 89.770625) + (xy 125.038938 89.770623) (xy 125.170048 89.683018) (xy 125.281548 89.571518) (xy 125.369153 89.440408) + (xy 125.429496 89.294726) (xy 125.460259 89.140071) (xy 125.460259 88.982387) (xy 125.460259 88.982384) + (xy 125.460258 88.982382) (xy 125.447673 88.919114) (xy 125.429496 88.827732) (xy 125.408984 88.778211) + (xy 125.369156 88.682056) (xy 125.369149 88.682043) (xy 125.281548 88.55094) (xy 125.281545 88.550936) + (xy 125.168096 88.437487) (xy 125.134611 88.376164) (xy 125.139595 88.306472) (xy 125.141216 88.302354) + (xy 125.169735 88.233501) (xy 125.169737 88.233497) (xy 125.2005 88.078842) (xy 125.2005 87.921158) + (xy 125.2005 87.921155) (xy 125.200499 87.921153) (xy 125.182544 87.830888) (xy 125.169737 87.766503) + (xy 125.156976 87.735694) (xy 125.109397 87.620827) (xy 125.10939 87.620814) (xy 125.021789 87.489711) + (xy 125.021786 87.489707) (xy 124.910289 87.37821) (xy 124.895259 87.368168) (xy 124.779185 87.290609) + (xy 124.779172 87.290602) (xy 124.732217 87.271153) (xy 130.2995 87.271153) (xy 130.2995 87.428846) + (xy 130.330261 87.583489) (xy 130.330264 87.583501) (xy 130.390602 87.729172) (xy 130.390609 87.729185) + (xy 130.47821 87.860288) (xy 130.478213 87.860292) (xy 130.589707 87.971786) (xy 130.589711 87.971789) + (xy 130.720814 88.05939) (xy 130.720827 88.059397) (xy 130.866498 88.119735) (xy 130.866503 88.119737) + (xy 131.021153 88.150499) (xy 131.021156 88.1505) (xy 131.021158 88.1505) (xy 131.178844 88.1505) + (xy 131.178845 88.150499) (xy 131.333497 88.119737) (xy 131.479179 88.059394) (xy 131.610289 87.971789) + (xy 131.721789 87.860289) (xy 131.809394 87.729179) (xy 131.828279 87.683586) (xy 131.835628 87.665845) + (xy 131.869735 87.583501) (xy 131.869737 87.583497) (xy 131.9005 87.428842) (xy 131.9005 87.271158) + (xy 131.9005 87.271155) (xy 131.900499 87.271153) (xy 131.900217 87.269735) (xy 131.869737 87.116503) + (xy 131.865216 87.105589) (xy 131.809397 86.970827) (xy 131.80939 86.970814) (xy 131.721789 86.839711) + (xy 131.721786 86.839707) (xy 131.610292 86.728213) (xy 131.610288 86.72821) (xy 131.479185 86.640609) + (xy 131.479172 86.640602) (xy 131.333501 86.580264) (xy 131.333489 86.580261) (xy 131.178845 86.5495) + (xy 131.178842 86.5495) (xy 131.021158 86.5495) (xy 131.021155 86.5495) (xy 130.86651 86.580261) + (xy 130.866498 86.580264) (xy 130.720827 86.640602) (xy 130.720814 86.640609) (xy 130.589711 86.72821) + (xy 130.589707 86.728213) (xy 130.478213 86.839707) (xy 130.47821 86.839711) (xy 130.390609 86.970814) + (xy 130.390602 86.970827) (xy 130.330264 87.116498) (xy 130.330261 87.11651) (xy 130.2995 87.271153) + (xy 124.732217 87.271153) (xy 124.633501 87.230264) (xy 124.633489 87.230261) (xy 124.478845 87.1995) + (xy 124.478842 87.1995) (xy 124.321158 87.1995) (xy 124.321155 87.1995) (xy 124.16651 87.230261) + (xy 124.166498 87.230264) (xy 124.020827 87.290602) (xy 124.020814 87.290609) (xy 123.889711 87.37821) + (xy 123.889707 87.378213) (xy 123.778213 87.489707) (xy 123.77821 87.489711) (xy 123.690609 87.620814) + (xy 123.690602 87.620827) (xy 123.630264 87.766498) (xy 123.630261 87.76651) (xy 123.5995 87.921153) + (xy 123.5995 88.078846) (xy 123.630261 88.233489) (xy 123.630264 88.233501) (xy 123.690602 88.379172) + (xy 123.690609 88.379185) (xy 123.77821 88.510288) (xy 123.778213 88.510292) (xy 123.891662 88.623741) + (xy 123.925147 88.685064) (xy 123.920163 88.754756) (xy 123.918543 88.758873) (xy 123.890022 88.827731) + (xy 123.89002 88.827739) (xy 123.859259 88.982382) (xy 123.859259 89.140075) (xy 123.89002 89.294718) + (xy 123.890023 89.29473) (xy 123.950361 89.440401) (xy 123.950368 89.440414) (xy 124.014802 89.536846) + (xy 124.03568 89.603524) (xy 124.017195 89.670904) (xy 123.965216 89.717594) (xy 123.935893 89.727354) + (xy 123.854742 89.743496) (xy 123.854733 89.743499) (xy 123.709062 89.803837) (xy 123.709049 89.803844) + (xy 123.577946 89.891445) (xy 123.577942 89.891448) (xy 123.466448 90.002942) (xy 123.466445 90.002946) + (xy 123.378844 90.134049) (xy 123.378837 90.134062) (xy 123.318499 90.279733) (xy 123.318496 90.279745) + (xy 123.287735 90.434388) (xy 120.2505 90.434388) (xy 120.2505 88.443995) (xy 121.049499 88.443995) + (xy 121.076418 88.579322) (xy 121.076421 88.579332) (xy 121.129221 88.706804) (xy 121.129228 88.706817) + (xy 121.205885 88.821541) (xy 121.205888 88.821545) (xy 121.303454 88.919111) (xy 121.303458 88.919114) + (xy 121.418182 88.995771) (xy 121.418195 88.995778) (xy 121.545667 89.048578) (xy 121.545672 89.04858) + (xy 121.545676 89.04858) (xy 121.545677 89.048581) (xy 121.681004 89.0755) (xy 121.681007 89.0755) + (xy 121.818995 89.0755) (xy 121.910041 89.057389) (xy 121.954328 89.04858) (xy 122.081811 88.995775) + (xy 122.196542 88.919114) (xy 122.294114 88.821542) (xy 122.370775 88.706811) (xy 122.42358 88.579328) + (xy 122.4505 88.443993) (xy 122.4505 88.306007) (xy 122.4505 88.306004) (xy 122.423581 88.170677) + (xy 122.42358 88.170676) (xy 122.42358 88.170672) (xy 122.402482 88.119737) (xy 122.370778 88.043195) + (xy 122.370771 88.043182) (xy 122.294114 87.928458) (xy 122.294111 87.928454) (xy 122.196545 87.830888) (xy 122.196541 87.830885) (xy 122.081817 87.754228) (xy 122.081804 87.754221) (xy 121.954332 87.701421) (xy 121.954322 87.701418) (xy 121.818995 87.6745) (xy 121.818993 87.6745) (xy 121.681007 87.6745) (xy 121.681005 87.6745) (xy 121.545677 87.701418) (xy 121.545667 87.701421) (xy 121.418195 87.754221) (xy 121.418182 87.754228) (xy 121.303458 87.830885) (xy 121.303454 87.830888) (xy 121.205888 87.928454) (xy 121.205885 87.928458) (xy 121.129228 88.043182) (xy 121.129221 88.043195) (xy 121.076421 88.170667) (xy 121.076418 88.170677) (xy 121.0495 88.306004) (xy 121.0495 88.306007) (xy 121.0495 88.443993) - (xy 121.0495 88.443995) (xy 121.049499 88.443995) (xy 120.2505 88.443995) (xy 120.2505 87.271153) - (xy 130.2995 87.271153) (xy 130.2995 87.428846) (xy 130.330261 87.583489) (xy 130.330264 87.583501) - (xy 130.390602 87.729172) (xy 130.390609 87.729185) (xy 130.47821 87.860288) (xy 130.478213 87.860292) - (xy 130.589707 87.971786) (xy 130.589711 87.971789) (xy 130.720814 88.05939) (xy 130.720827 88.059397) - (xy 130.866498 88.119735) (xy 130.866503 88.119737) (xy 131.021153 88.150499) (xy 131.021156 88.1505) - (xy 131.021158 88.1505) (xy 131.178844 88.1505) (xy 131.178845 88.150499) (xy 131.333497 88.119737) - (xy 131.479179 88.059394) (xy 131.610289 87.971789) (xy 131.721789 87.860289) (xy 131.809394 87.729179) - (xy 131.809397 87.729172) (xy 131.835628 87.665845) (xy 131.867163 87.589711) (xy 131.869737 87.583497) - (xy 131.9005 87.428842) (xy 131.9005 87.271158) (xy 131.9005 87.271155) (xy 131.900499 87.271153) - (xy 131.900217 87.269735) (xy 131.869737 87.116503) (xy 131.865216 87.105589) (xy 131.809397 86.970827) - (xy 131.80939 86.970814) (xy 131.721789 86.839711) (xy 131.721786 86.839707) (xy 131.610292 86.728213) - (xy 131.610288 86.72821) (xy 131.479185 86.640609) (xy 131.479172 86.640602) (xy 131.333501 86.580264) - (xy 131.333489 86.580261) (xy 131.178845 86.5495) (xy 131.178842 86.5495) (xy 131.021158 86.5495) - (xy 131.021155 86.5495) (xy 130.86651 86.580261) (xy 130.866498 86.580264) (xy 130.720827 86.640602) - (xy 130.720814 86.640609) (xy 130.589711 86.72821) (xy 130.589707 86.728213) (xy 130.478213 86.839707) - (xy 130.47821 86.839711) (xy 130.390609 86.970814) (xy 130.390602 86.970827) (xy 130.330264 87.116498) - (xy 130.330261 87.11651) (xy 130.2995 87.271153) (xy 120.2505 87.271153) (xy 120.2505 86.399974) + (xy 121.0495 88.443995) (xy 121.049499 88.443995) (xy 120.2505 88.443995) (xy 120.2505 86.399974) (xy 133.475 86.399974) (xy 133.475 86.640025) (xy 133.512549 86.877105) (xy 133.586728 87.105401) (xy 133.695705 87.319277) (xy 133.759441 87.407003) (xy 133.759443 87.407003) (xy 134.496624 86.669822) (xy 134.510778 86.722642) (xy 134.579896 86.842357) (xy 134.677643 86.940104) (xy 134.797358 87.009222) @@ -40192,7 +40922,7 @@ (xy 135.887004 87.760556) (xy 135.149822 87.023375) (xy 135.202642 87.009222) (xy 135.322357 86.940104) (xy 135.420104 86.842357) (xy 135.489222 86.722642) (xy 135.503374 86.669822) (xy 136.272897 87.439345) (xy 136.298654 87.461824) (xy 136.336414 87.513796) (xy 136.506204 87.683586) (xy 136.700464 87.824724) - (xy 136.782473 87.86651) (xy 136.914406 87.933734) (xy 136.914408 87.933734) (xy 136.914411 87.933736) + (xy 136.770262 87.860288) (xy 136.914406 87.933734) (xy 136.914408 87.933734) (xy 136.914411 87.933736) (xy 137.142778 88.007937) (xy 137.379941 88.0455) (xy 137.379942 88.0455) (xy 137.620058 88.0455) (xy 137.620059 88.0455) (xy 137.857222 88.007937) (xy 138.085589 87.933736) (xy 138.299536 87.824724) (xy 138.493796 87.683586) (xy 138.520522 87.656859) (xy 138.581841 87.623376) (xy 138.651533 87.62836) @@ -40209,7 +40939,7 @@ (xy 152.995676 89.04858) (xy 152.995677 89.048581) (xy 153.131004 89.0755) (xy 153.131007 89.0755) (xy 153.268995 89.0755) (xy 153.360041 89.057389) (xy 153.404328 89.04858) (xy 153.531811 88.995775) (xy 153.646542 88.919114) (xy 153.744114 88.821542) (xy 153.820775 88.706811) (xy 153.87358 88.579328) - (xy 153.893501 88.479179) (xy 153.9005 88.443995) (xy 153.9005 88.306004) (xy 153.873581 88.170677) + (xy 153.9005 88.443993) (xy 153.9005 88.306007) (xy 153.9005 88.306004) (xy 153.873581 88.170677) (xy 153.87358 88.170676) (xy 153.87358 88.170672) (xy 153.852482 88.119737) (xy 153.820778 88.043195) (xy 153.820771 88.043182) (xy 153.744114 87.928458) (xy 153.744111 87.928454) (xy 153.646545 87.830888) (xy 153.646541 87.830885) (xy 153.531817 87.754228) (xy 153.531804 87.754221) (xy 153.404332 87.701421) @@ -40227,15 +40957,14 @@ (xy 143.489707 87.621786) (xy 143.489711 87.621789) (xy 143.620814 87.70939) (xy 143.620827 87.709397) (xy 143.744338 87.760556) (xy 143.766503 87.769737) (xy 143.921153 87.800499) (xy 143.921156 87.8005) (xy 143.921158 87.8005) (xy 144.078844 87.8005) (xy 144.078845 87.800499) (xy 144.233497 87.769737) - (xy 144.351592 87.720821) (xy 144.379172 87.709397) (xy 144.379172 87.709396) (xy 144.379179 87.709394) - (xy 144.510289 87.621789) (xy 144.621789 87.510289) (xy 144.709394 87.379179) (xy 144.769737 87.233497) - (xy 144.8005 87.078842) (xy 144.8005 86.921158) (xy 144.8005 86.921155) (xy 144.800499 86.921153) - (xy 144.791761 86.877223) (xy 144.769737 86.766503) (xy 144.753876 86.72821) (xy 144.709397 86.620827) - (xy 144.70939 86.620814) (xy 144.62179 86.489712) (xy 144.621784 86.489705) (xy 144.553232 86.421153) - (xy 146.6995 86.421153) (xy 146.6995 86.578846) (xy 146.730261 86.733489) (xy 146.730264 86.733501) - (xy 146.790602 86.879172) (xy 146.790609 86.879185) (xy 146.87821 87.010288) (xy 146.878213 87.010292) - (xy 146.989707 87.121786) (xy 146.989711 87.121789) (xy 147.120814 87.20939) (xy 147.120827 87.209397) - (xy 147.266498 87.269735) (xy 147.266503 87.269737) (xy 147.416131 87.2995) (xy 147.421153 87.300499) + (xy 144.379179 87.709394) (xy 144.510289 87.621789) (xy 144.621789 87.510289) (xy 144.709394 87.379179) + (xy 144.769737 87.233497) (xy 144.8005 87.078842) (xy 144.8005 86.921158) (xy 144.8005 86.921155) + (xy 144.800499 86.921153) (xy 144.791761 86.877223) (xy 144.769737 86.766503) (xy 144.753876 86.72821) + (xy 144.709397 86.620827) (xy 144.70939 86.620814) (xy 144.62179 86.489712) (xy 144.621784 86.489705) + (xy 144.553232 86.421153) (xy 146.6995 86.421153) (xy 146.6995 86.578846) (xy 146.730261 86.733489) + (xy 146.730264 86.733501) (xy 146.790602 86.879172) (xy 146.790609 86.879185) (xy 146.87821 87.010288) + (xy 146.878213 87.010292) (xy 146.989707 87.121786) (xy 146.989711 87.121789) (xy 147.120814 87.20939) + (xy 147.120827 87.209397) (xy 147.266498 87.269735) (xy 147.266503 87.269737) (xy 147.421153 87.300499) (xy 147.421156 87.3005) (xy 147.421158 87.3005) (xy 147.578844 87.3005) (xy 147.578845 87.300499) (xy 147.733497 87.269737) (xy 147.879179 87.209394) (xy 148.010289 87.121789) (xy 148.121789 87.010289) (xy 148.209394 86.879179) (xy 148.269737 86.733497) (xy 148.3005 86.578842) (xy 148.3005 86.421158) @@ -40280,12 +41009,12 @@ (xy 149.266498 84.730264) (xy 149.120827 84.790602) (xy 149.120814 84.790609) (xy 148.989711 84.87821) (xy 148.989707 84.878213) (xy 148.878213 84.989707) (xy 148.87821 84.989711) (xy 148.790609 85.120814) (xy 148.790602 85.120827) (xy 148.730264 85.266498) (xy 148.730261 85.26651) (xy 148.6995 85.421153) - (xy 141.058535 85.421153) (xy 140.993796 85.356414) (xy 140.799536 85.215276) (xy 140.728704 85.179185) + (xy 141.058535 85.421153) (xy 140.993796 85.356414) (xy 140.799536 85.215276) (xy 140.787984 85.20939) (xy 140.585593 85.106265) (xy 140.357222 85.032063) (xy 140.120059 84.9945) (xy 139.879941 84.9945) (xy 139.761359 85.013281) (xy 139.642777 85.032063) (xy 139.414406 85.106265) (xy 139.200463 85.215276) (xy 139.006201 85.356416) (xy 138.837681 85.524937) (xy 138.776358 85.558422) (xy 138.706666 85.553438) (xy 138.662319 85.524937) (xy 138.493798 85.356416) (xy 138.493796 85.356414) (xy 138.299536 85.215276) - (xy 138.228704 85.179185) (xy 138.085593 85.106265) (xy 137.857222 85.032063) (xy 137.620059 84.9945) + (xy 138.287984 85.20939) (xy 138.085593 85.106265) (xy 137.857222 85.032063) (xy 137.620059 84.9945) (xy 137.379941 84.9945) (xy 137.261359 85.013281) (xy 137.142777 85.032063) (xy 136.914406 85.106265) (xy 136.700463 85.215276) (xy 136.506201 85.356416) (xy 136.336413 85.526204) (xy 136.298654 85.578175) (xy 136.280544 85.592139) (xy 136.280978 85.592573) (xy 135.503374 86.370176) (xy 135.489222 86.317358) @@ -40295,241 +41024,234 @@ (xy 134.414598 85.106728) (xy 134.200729 85.215701) (xy 134.112995 85.279442) (xy 134.850178 86.016624) (xy 134.797358 86.030778) (xy 134.677643 86.099896) (xy 134.579896 86.197643) (xy 134.510778 86.317358) (xy 134.496624 86.370177) (xy 133.759442 85.632995) (xy 133.695701 85.720729) (xy 133.586728 85.934598) - (xy 133.512549 86.162894) (xy 133.475 86.399974) (xy 120.2505 86.399974) (xy 120.2505 84.721153) - (xy 123.5995 84.721153) (xy 123.5995 84.878846) (xy 123.630261 85.033489) (xy 123.630264 85.033501) - (xy 123.690602 85.179172) (xy 123.690609 85.179185) (xy 123.77821 85.310288) (xy 123.778213 85.310292) - (xy 123.889707 85.421786) (xy 123.889711 85.421789) (xy 124.020814 85.50939) (xy 124.020827 85.509397) - (xy 124.127153 85.553438) (xy 124.166503 85.569737) (xy 124.279125 85.592139) (xy 124.321153 85.600499) - (xy 124.321156 85.6005) (xy 124.321158 85.6005) (xy 124.478844 85.6005) (xy 124.478845 85.600499) - (xy 124.633497 85.569737) (xy 124.779179 85.509394) (xy 124.910289 85.421789) (xy 125.021789 85.310289) - (xy 125.042401 85.279441) (xy 125.056855 85.25781) (xy 125.10939 85.179185) (xy 125.10939 85.179184) - (xy 125.109394 85.179179) (xy 125.169737 85.033497) (xy 125.2005 84.878842) (xy 125.2005 84.721158) - (xy 125.2005 84.721155) (xy 125.200499 84.721153) (xy 125.180543 84.620827) (xy 125.169737 84.566503) - (xy 125.137929 84.489711) (xy 125.126666 84.462518) (xy 125.109532 84.421153) (xy 141.1995 84.421153) - (xy 141.1995 84.578846) (xy 141.230261 84.733489) (xy 141.230264 84.733501) (xy 141.290602 84.879172) - (xy 141.290609 84.879185) (xy 141.37821 85.010288) (xy 141.378213 85.010292) (xy 141.489707 85.121786) - (xy 141.489711 85.121789) (xy 141.620814 85.20939) (xy 141.620827 85.209397) (xy 141.737708 85.25781) - (xy 141.766503 85.269737) (xy 141.921153 85.300499) (xy 141.921156 85.3005) (xy 141.921158 85.3005) - (xy 142.078844 85.3005) (xy 142.078845 85.300499) (xy 142.233497 85.269737) (xy 142.363943 85.215705) - (xy 142.379172 85.209397) (xy 142.379172 85.209396) (xy 142.379179 85.209394) (xy 142.510289 85.121789) - (xy 142.621789 85.010289) (xy 142.635539 84.989711) (xy 142.646898 84.972712) (xy 142.70051 84.927906) - (xy 142.769835 84.919199) (xy 142.832862 84.949353) (xy 142.853102 84.972712) (xy 142.878207 85.010284) - (xy 142.878213 85.010292) (xy 142.989707 85.121786) (xy 142.989711 85.121789) (xy 143.120814 85.20939) - (xy 143.120827 85.209397) (xy 143.237708 85.25781) (xy 143.266503 85.269737) (xy 143.421153 85.300499) - (xy 143.421156 85.3005) (xy 143.421158 85.3005) (xy 143.578844 85.3005) (xy 143.578845 85.300499) - (xy 143.589179 85.298443) (xy 143.614287 85.29345) (xy 143.614292 85.293449) (xy 143.6998 85.276439) - (xy 143.733497 85.269737) (xy 143.863943 85.215705) (xy 143.879172 85.209397) (xy 143.879172 85.209396) - (xy 143.879179 85.209394) (xy 144.010289 85.121789) (xy 144.121789 85.010289) (xy 144.209394 84.879179) - (xy 144.269737 84.733497) (xy 144.3005 84.578842) (xy 144.3005 84.421158) (xy 144.3005 84.421155) - (xy 144.300499 84.421153) (xy 144.274531 84.290606) (xy 144.269737 84.266503) (xy 144.269735 84.266498) - (xy 144.209397 84.120827) (xy 144.20939 84.120814) (xy 144.121789 83.989711) (xy 144.121786 83.989707) - (xy 144.010292 83.878213) (xy 144.010288 83.87821) (xy 143.879185 83.790609) (xy 143.879172 83.790602) - (xy 143.733501 83.730264) (xy 143.733489 83.730261) (xy 143.578845 83.6995) (xy 143.578842 83.6995) - (xy 143.421158 83.6995) (xy 143.421155 83.6995) (xy 143.26651 83.730261) (xy 143.266498 83.730264) - (xy 143.120827 83.790602) (xy 143.120814 83.790609) (xy 142.989711 83.87821) (xy 142.989707 83.878213) - (xy 142.878213 83.989707) (xy 142.853102 84.027289) (xy 142.799489 84.072093) (xy 142.730164 84.0808) - (xy 142.667137 84.050645) (xy 142.646898 84.027289) (xy 142.621786 83.989707) (xy 142.510292 83.878213) - (xy 142.510288 83.87821) (xy 142.379185 83.790609) (xy 142.379172 83.790602) (xy 142.233501 83.730264) - (xy 142.233489 83.730261) (xy 142.078845 83.6995) (xy 142.078842 83.6995) (xy 141.921158 83.6995) - (xy 141.921155 83.6995) (xy 141.76651 83.730261) (xy 141.766498 83.730264) (xy 141.620827 83.790602) - (xy 141.620814 83.790609) (xy 141.489711 83.87821) (xy 141.489707 83.878213) (xy 141.378213 83.989707) - (xy 141.37821 83.989711) (xy 141.290609 84.120814) (xy 141.290602 84.120827) (xy 141.230264 84.266498) - (xy 141.230261 84.26651) (xy 141.1995 84.421153) (xy 125.109532 84.421153) (xy 125.109395 84.420823) - (xy 125.10939 84.420814) (xy 125.021789 84.289711) (xy 125.021786 84.289707) (xy 124.910292 84.178213) - (xy 124.910288 84.17821) (xy 124.779185 84.090609) (xy 124.779172 84.090602) (xy 124.633501 84.030264) - (xy 124.633489 84.030261) (xy 124.478845 83.9995) (xy 124.478842 83.9995) (xy 124.321158 83.9995) - (xy 124.321155 83.9995) (xy 124.16651 84.030261) (xy 124.166498 84.030264) (xy 124.020827 84.090602) - (xy 124.020814 84.090609) (xy 123.889711 84.17821) (xy 123.889707 84.178213) (xy 123.778213 84.289707) - (xy 123.77821 84.289711) (xy 123.690609 84.420814) (xy 123.690602 84.420827) (xy 123.630264 84.566498) - (xy 123.630261 84.56651) (xy 123.5995 84.721153) (xy 120.2505 84.721153) (xy 120.2505 81.274038) - (xy 121.7995 81.274038) (xy 121.7995 81.525962) (xy 121.83811 81.769735) (xy 121.83891 81.774785) - (xy 121.91676 82.014383) (xy 122.031132 82.238848) (xy 122.179201 82.442649) (xy 122.179205 82.442654) - (xy 122.357345 82.620794) (xy 122.35735 82.620798) (xy 122.535117 82.749952) (xy 122.561155 82.76887) - (xy 122.704184 82.841747) (xy 122.785616 82.883239) (xy 122.785618 82.883239) (xy 122.785621 82.883241) - (xy 123.025215 82.96109) (xy 123.274038 83.0005) (xy 123.274039 83.0005) (xy 123.525961 83.0005) - (xy 123.525962 83.0005) (xy 123.774785 82.96109) (xy 124.014379 82.883241) (xy 124.238845 82.76887) - (xy 124.442656 82.620793) (xy 124.620793 82.442656) (xy 124.76887 82.238845) (xy 124.883241 82.014379) - (xy 124.96109 81.774785) (xy 125.0005 81.525962) (xy 125.0005 81.274038) (xy 124.96109 81.025215) - (xy 124.883241 80.785621) (xy 124.883239 80.785618) (xy 124.883239 80.785616) (xy 124.826439 80.674141) - (xy 124.76887 80.561155) (xy 124.684192 80.444605) (xy 124.643033 80.387954) (xy 124.64303 80.387951) - (xy 124.635955 80.378213) (xy 124.620793 80.357344) (xy 124.584602 80.321153) (xy 132.5995 80.321153) - (xy 132.5995 80.478846) (xy 132.630261 80.633489) (xy 132.630264 80.633501) (xy 132.690602 80.779172) - (xy 132.690609 80.779185) (xy 132.77821 80.910288) (xy 132.778213 80.910292) (xy 132.889707 81.021786) - (xy 132.889711 81.021789) (xy 133.020814 81.10939) (xy 133.020827 81.109397) (xy 133.166498 81.169735) - (xy 133.166503 81.169737) (xy 133.321153 81.200499) (xy 133.321156 81.2005) (xy 133.321158 81.2005) - (xy 133.478844 81.2005) (xy 133.478845 81.200499) (xy 133.633497 81.169737) (xy 133.779179 81.109394) - (xy 133.89008 81.035291) (xy 133.956757 81.014414) (xy 134.024137 81.032898) (xy 134.070828 81.084877) - (xy 134.073532 81.090942) (xy 134.090602 81.132156) (xy 134.090609 81.132168) (xy 134.17821 81.263271) - (xy 134.178213 81.263275) (xy 134.289707 81.374769) (xy 134.289711 81.374772) (xy 134.420814 81.462373) - (xy 134.420827 81.46238) (xy 134.536499 81.510292) (xy 134.566503 81.52272) (xy 134.721153 81.553482) - (xy 134.721156 81.553483) (xy 134.721158 81.553483) (xy 134.878844 81.553483) (xy 134.878845 81.553482) - (xy 135.033497 81.52272) (xy 135.179179 81.462377) (xy 135.310289 81.374772) (xy 135.421789 81.263272) - (xy 135.509394 81.132162) (xy 135.518824 81.109397) (xy 135.53148 81.078842) (xy 135.569737 80.98648) - (xy 135.6005 80.831825) (xy 135.6005 80.731941) (xy 135.620185 80.664902) (xy 135.672989 80.619147) - (xy 135.742147 80.609203) (xy 135.805703 80.638228) (xy 135.812181 80.64426) (xy 135.889707 80.721786) - (xy 135.889711 80.721789) (xy 136.020814 80.80939) (xy 136.020827 80.809397) (xy 136.083424 80.835325) - (xy 136.166503 80.869737) (xy 136.321153 80.900499) (xy 136.321156 80.9005) (xy 136.321158 80.9005) - (xy 136.478843 80.9005) (xy 136.494564 80.897372) (xy 136.551309 80.886085) (xy 136.620899 80.892312) - (xy 136.676077 80.935174) (xy 136.699322 81.001063) (xy 136.6995 81.007702) (xy 136.6995 81.078846) - (xy 136.730261 81.233489) (xy 136.730264 81.233501) (xy 136.790602 81.379172) (xy 136.790609 81.379185) - (xy 136.87821 81.510288) (xy 136.878213 81.510292) (xy 136.989707 81.621786) (xy 136.989711 81.621789) - (xy 137.120814 81.70939) (xy 137.120827 81.709397) (xy 137.266498 81.769735) (xy 137.266503 81.769737) - (xy 137.421153 81.800499) (xy 137.421156 81.8005) (xy 137.421158 81.8005) (xy 137.578844 81.8005) - (xy 137.578845 81.800499) (xy 137.733497 81.769737) (xy 137.879179 81.709394) (xy 138.010289 81.621789) - (xy 138.121789 81.510289) (xy 138.209394 81.379179) (xy 138.21122 81.374772) (xy 138.252944 81.274038) - (xy 138.269737 81.233497) (xy 138.3005 81.078842) (xy 138.3005 80.921158) (xy 138.3005 80.921155) - (xy 138.300499 80.921153) (xy 138.290271 80.869735) (xy 138.269737 80.766503) (xy 138.245892 80.708935) - (xy 138.209397 80.620827) (xy 138.20939 80.620814) (xy 138.121789 80.489711) (xy 138.121786 80.489707) - (xy 138.010292 80.378213) (xy 138.010288 80.37821) (xy 137.879185 80.290609) (xy 137.879172 80.290602) - (xy 137.733501 80.230264) (xy 137.733489 80.230261) (xy 137.578845 80.1995) (xy 137.578842 80.1995) - (xy 137.421158 80.1995) (xy 137.421155 80.1995) (xy 137.348691 80.213914) (xy 137.2791 80.207687) - (xy 137.223922 80.164824) (xy 137.200678 80.098934) (xy 137.2005 80.092297) (xy 137.2005 80.021155) - (xy 137.200499 80.021153) (xy 137.192958 79.983244) (xy 137.169737 79.866503) (xy 137.169735 79.866498) - (xy 137.109397 79.720827) (xy 137.10939 79.720814) (xy 137.021789 79.589711) (xy 137.021786 79.589707) - (xy 136.910292 79.478213) (xy 136.910288 79.47821) (xy 136.820429 79.418168) (xy 136.779185 79.390609) - (xy 136.779172 79.390602) (xy 136.633501 79.330264) (xy 136.633489 79.330261) (xy 136.587701 79.321153) - (xy 138.7995 79.321153) (xy 138.7995 79.478846) (xy 138.830261 79.633489) (xy 138.830264 79.633501) - (xy 138.890602 79.779172) (xy 138.890609 79.779185) (xy 138.97821 79.910288) (xy 138.978213 79.910292) - (xy 139.089707 80.021786) (xy 139.089711 80.021789) (xy 139.220814 80.10939) (xy 139.220827 80.109397) - (xy 139.354642 80.164824) (xy 139.366503 80.169737) (xy 139.516131 80.1995) (xy 139.521153 80.200499) - (xy 139.521156 80.2005) (xy 139.521158 80.2005) (xy 139.678844 80.2005) (xy 139.678845 80.200499) - (xy 139.833497 80.169737) (xy 139.951592 80.120821) (xy 139.979172 80.109397) (xy 139.979172 80.109396) - (xy 139.979179 80.109394) (xy 140.110289 80.021789) (xy 140.221789 79.910289) (xy 140.309394 79.779179) - (xy 140.369737 79.633497) (xy 140.4005 79.478842) (xy 140.4005 79.321158) (xy 140.4005 79.321155) - (xy 140.400499 79.321153) (xy 140.394287 79.289924) (xy 140.369737 79.166503) (xy 140.360577 79.144388) - (xy 140.309397 79.020827) (xy 140.30939 79.020814) (xy 140.221789 78.889711) (xy 140.221786 78.889707) - (xy 140.110292 78.778213) (xy 140.110288 78.77821) (xy 139.979185 78.690609) (xy 139.979172 78.690602) - (xy 139.833501 78.630264) (xy 139.833489 78.630261) (xy 139.678845 78.5995) (xy 139.678842 78.5995) - (xy 139.521158 78.5995) (xy 139.521155 78.5995) (xy 139.36651 78.630261) (xy 139.366498 78.630264) - (xy 139.220827 78.690602) (xy 139.220814 78.690609) (xy 139.089711 78.77821) (xy 139.089707 78.778213) - (xy 138.978213 78.889707) (xy 138.97821 78.889711) (xy 138.890609 79.020814) (xy 138.890602 79.020827) - (xy 138.830264 79.166498) (xy 138.830261 79.16651) (xy 138.7995 79.321153) (xy 136.587701 79.321153) - (xy 136.478845 79.2995) (xy 136.478842 79.2995) (xy 136.321158 79.2995) (xy 136.321155 79.2995) - (xy 136.16651 79.330261) (xy 136.166498 79.330264) (xy 136.020827 79.390602) (xy 136.020814 79.390609) - (xy 135.889711 79.47821) (xy 135.889707 79.478213) (xy 135.778213 79.589707) (xy 135.77821 79.589711) - (xy 135.690609 79.720814) (xy 135.690602 79.720827) (xy 135.630264 79.866498) (xy 135.630261 79.86651) - (xy 135.5995 80.021153) (xy 135.5995 80.121042) (xy 135.579815 80.188081) (xy 135.527011 80.233836) - (xy 135.457853 80.24378) (xy 135.394297 80.214755) (xy 135.387819 80.208723) (xy 135.310292 80.131196) - (xy 135.310288 80.131193) (xy 135.179185 80.043592) (xy 135.179172 80.043585) (xy 135.033501 79.983247) - (xy 135.033489 79.983244) (xy 134.878845 79.952483) (xy 134.878842 79.952483) (xy 134.721158 79.952483) - (xy 134.721155 79.952483) (xy 134.56651 79.983244) (xy 134.566498 79.983247) (xy 134.420827 80.043585) - (xy 134.420816 80.043591) (xy 134.309918 80.117691) (xy 134.243241 80.138568) (xy 134.175861 80.120083) - (xy 134.129171 80.068104) (xy 134.126473 80.062054) (xy 134.109394 80.020821) (xy 134.109392 80.020818) - (xy 134.10939 80.020814) (xy 134.021789 79.889711) (xy 134.021786 79.889707) (xy 133.910292 79.778213) - (xy 133.910288 79.77821) (xy 133.779185 79.690609) (xy 133.779172 79.690602) (xy 133.633501 79.630264) - (xy 133.633489 79.630261) (xy 133.478845 79.5995) (xy 133.478842 79.5995) (xy 133.321158 79.5995) - (xy 133.321155 79.5995) (xy 133.16651 79.630261) (xy 133.166498 79.630264) (xy 133.020827 79.690602) - (xy 133.020814 79.690609) (xy 132.889711 79.77821) (xy 132.889707 79.778213) (xy 132.778213 79.889707) - (xy 132.77821 79.889711) (xy 132.690609 80.020814) (xy 132.690602 80.020827) (xy 132.630264 80.166498) - (xy 132.630261 80.16651) (xy 132.5995 80.321153) (xy 124.584602 80.321153) (xy 124.442656 80.179207) - (xy 124.442654 80.179205) (xy 124.442649 80.179201) (xy 124.238848 80.031132) (xy 124.238847 80.031131) - (xy 124.238845 80.03113) (xy 124.157548 79.989707) (xy 124.014383 79.91676) (xy 123.774785 79.83891) - (xy 123.525962 79.7995) (xy 123.274038 79.7995) (xy 123.149626 79.819205) (xy 123.025214 79.83891) - (xy 122.785616 79.91676) (xy 122.561151 80.031132) (xy 122.35735 80.179201) (xy 122.357345 80.179205) - (xy 122.179205 80.357345) (xy 122.179201 80.35735) (xy 122.031132 80.561151) (xy 121.91676 80.785616) - (xy 121.83891 81.025214) (xy 121.811147 81.2005) (xy 121.7995 81.274038) (xy 120.2505 81.274038) - (xy 120.2505 74.921153) (xy 126.3995 74.921153) (xy 126.3995 75.078846) (xy 126.430261 75.233489) - (xy 126.430264 75.233501) (xy 126.490602 75.379172) (xy 126.490609 75.379185) (xy 126.57821 75.510288) - (xy 126.578213 75.510292) (xy 126.689707 75.621786) (xy 126.689711 75.621789) (xy 126.820814 75.70939) - (xy 126.820827 75.709397) (xy 126.966498 75.769735) (xy 126.966503 75.769737) (xy 127.121153 75.800499) - (xy 127.121156 75.8005) (xy 127.121158 75.8005) (xy 127.175162 75.8005) (xy 127.242201 75.820185) - (xy 127.287956 75.872989) (xy 127.289715 75.877029) (xy 127.290606 75.879179) (xy 127.290607 75.87918) - (xy 127.290609 75.879185) (xy 127.325304 75.931109) (xy 127.346182 75.997786) (xy 127.327698 76.065167) - (xy 127.325304 76.068891) (xy 127.290609 76.120814) (xy 127.290602 76.120827) (xy 127.230264 76.266498) - (xy 127.230261 76.26651) (xy 127.1995 76.421153) (xy 127.1995 76.578846) (xy 127.230261 76.733489) - (xy 127.230264 76.733501) (xy 127.290602 76.879172) (xy 127.290609 76.879185) (xy 127.37821 77.010288) - (xy 127.378213 77.010292) (xy 127.489707 77.121786) (xy 127.489711 77.121789) (xy 127.620814 77.20939) - (xy 127.620827 77.209397) (xy 127.766498 77.269735) (xy 127.766503 77.269737) (xy 127.921153 77.300499) - (xy 127.921156 77.3005) (xy 127.921158 77.3005) (xy 128.078844 77.3005) (xy 128.078845 77.300499) - (xy 128.233497 77.269737) (xy 128.379179 77.209394) (xy 128.510289 77.121789) (xy 128.621789 77.010289) - (xy 128.709394 76.879179) (xy 128.709395 76.879176) (xy 128.709397 76.879173) (xy 128.712719 76.871153) - (xy 130.0995 76.871153) (xy 130.0995 77.028846) (xy 130.130261 77.183489) (xy 130.130264 77.183501) - (xy 130.190602 77.329172) (xy 130.190609 77.329185) (xy 130.27821 77.460288) (xy 130.278213 77.460292) - (xy 130.389707 77.571786) (xy 130.389711 77.571789) (xy 130.520814 77.65939) (xy 130.520827 77.659397) - (xy 130.666498 77.719735) (xy 130.666503 77.719737) (xy 130.818644 77.75) (xy 130.821153 77.750499) - (xy 130.821156 77.7505) (xy 130.821158 77.7505) (xy 130.978844 77.7505) (xy 130.978845 77.750499) - (xy 131.133497 77.719737) (xy 131.277011 77.660292) (xy 131.279172 77.659397) (xy 131.279172 77.659396) - (xy 131.279179 77.659394) (xy 131.410289 77.571789) (xy 131.521789 77.460289) (xy 131.609394 77.329179) - (xy 131.669737 77.183497) (xy 131.7005 77.028842) (xy 131.7005 76.871158) (xy 131.7005 76.871155) - (xy 131.700499 76.871153) (xy 131.685839 76.797453) (xy 131.669737 76.716503) (xy 131.663957 76.702548) - (xy 131.609397 76.570827) (xy 131.60939 76.570814) (xy 131.521789 76.439711) (xy 131.521786 76.439707) - (xy 131.410292 76.328213) (xy 131.410288 76.32821) (xy 131.324897 76.271153) (xy 132.5495 76.271153) - (xy 132.5495 76.428846) (xy 132.580261 76.583489) (xy 132.580264 76.583501) (xy 132.629575 76.702549) - (xy 132.637044 76.772018) (xy 132.629575 76.797453) (xy 132.580264 76.916501) (xy 132.580261 76.916513) - (xy 132.5495 77.071156) (xy 132.5495 77.228849) (xy 132.580261 77.383492) (xy 132.580264 77.383504) - (xy 132.640602 77.529175) (xy 132.640609 77.529188) (xy 132.72821 77.660291) (xy 132.728213 77.660295) - (xy 132.839707 77.771789) (xy 132.839711 77.771792) (xy 132.970814 77.859393) (xy 132.970827 77.8594) - (xy 133.116498 77.919738) (xy 133.116503 77.91974) (xy 133.271153 77.950502) (xy 133.271156 77.950503) - (xy 133.271158 77.950503) (xy 133.428844 77.950503) (xy 133.428845 77.950502) (xy 133.583497 77.91974) - (xy 133.723834 77.861611) (xy 133.729172 77.8594) (xy 133.729172 77.859399) (xy 133.729179 77.859397) - (xy 133.860289 77.771792) (xy 133.971789 77.660292) (xy 134.059394 77.529182) (xy 134.119737 77.3835) - (xy 134.1505 77.228845) (xy 134.1505 77.121153) (xy 142.7995 77.121153) (xy 142.7995 77.278846) - (xy 142.830261 77.433489) (xy 142.830264 77.433501) (xy 142.890602 77.579172) (xy 142.890609 77.579185) - (xy 142.97821 77.710288) (xy 142.978213 77.710292) (xy 143.089707 77.821786) (xy 143.089711 77.821789) - (xy 143.220814 77.90939) (xy 143.220827 77.909397) (xy 143.366498 77.969735) (xy 143.366503 77.969737) - (xy 143.521153 78.000499) (xy 143.521156 78.0005) (xy 143.521158 78.0005) (xy 143.678844 78.0005) - (xy 143.678845 78.000499) (xy 143.833497 77.969737) (xy 143.979179 77.909394) (xy 144.110289 77.821789) - (xy 144.221789 77.710289) (xy 144.264146 77.646898) (xy 144.280608 77.622261) (xy 144.33422 77.577455) - (xy 144.403545 77.568748) (xy 144.466572 77.598902) (xy 144.471391 77.60347) (xy 144.489707 77.621786) - (xy 144.48971 77.621788) (xy 144.489711 77.621789) (xy 144.515219 77.638833) (xy 144.527289 77.646898) - (xy 144.572093 77.700511) (xy 144.5808 77.769836) (xy 144.550645 77.832863) (xy 144.527289 77.853102) - (xy 144.489707 77.878213) (xy 144.378213 77.989707) (xy 144.37821 77.989711) (xy 144.290609 78.120814) - (xy 144.290602 78.120827) (xy 144.230264 78.266498) (xy 144.230261 78.26651) (xy 144.1995 78.421153) - (xy 144.1995 78.578846) (xy 144.230261 78.733489) (xy 144.230264 78.733501) (xy 144.290602 78.879172) - (xy 144.290609 78.879185) (xy 144.37821 79.010288) (xy 144.378213 79.010292) (xy 144.470897 79.102976) - (xy 144.504382 79.164299) (xy 144.499398 79.233991) (xy 144.457526 79.289924) (xy 144.452107 79.293759) - (xy 144.424024 79.312523) (xy 144.42402 79.312526) (xy 144.312526 79.42402) (xy 144.312523 79.424024) - (xy 144.224922 79.555127) (xy 144.224915 79.55514) (xy 144.164577 79.700811) (xy 144.164574 79.700823) - (xy 144.133813 79.855466) (xy 144.133813 80.013159) (xy 144.164574 80.167802) (xy 144.164577 80.167814) - (xy 144.224915 80.313485) (xy 144.224922 80.313498) (xy 144.312523 80.444601) (xy 144.312526 80.444605) - (xy 144.42402 80.556099) (xy 144.424024 80.556102) (xy 144.555127 80.643703) (xy 144.55514 80.64371) - (xy 144.674184 80.693019) (xy 144.728588 80.736859) (xy 144.741293 80.760127) (xy 144.790604 80.879176) - (xy 144.790609 80.879185) (xy 144.87821 81.010288) (xy 144.878213 81.010292) (xy 144.989707 81.121786) - (xy 144.989711 81.121789) (xy 145.120814 81.20939) (xy 145.120827 81.209397) (xy 145.250895 81.263272) - (xy 145.266503 81.269737) (xy 145.421153 81.300499) (xy 145.421156 81.3005) (xy 145.421158 81.3005) - (xy 145.578844 81.3005) (xy 145.578845 81.300499) (xy 145.733497 81.269737) (xy 145.879179 81.209394) - (xy 146.010289 81.121789) (xy 146.121789 81.010289) (xy 146.209394 80.879179) (xy 146.269737 80.733497) - (xy 146.3005 80.578842) (xy 146.3005 80.421158) (xy 146.3005 80.421155) (xy 146.300499 80.421153) - (xy 146.287807 80.357345) (xy 146.269737 80.266503) (xy 146.256206 80.233836) (xy 146.209397 80.120827) - (xy 146.20939 80.120814) (xy 146.121789 79.989711) (xy 146.121786 79.989707) (xy 146.010292 79.878213) - (xy 146.010288 79.87821) (xy 145.879185 79.790609) (xy 145.879176 79.790604) (xy 145.760127 79.741293) - (xy 145.705724 79.697452) (xy 145.693019 79.674184) (xy 145.64371 79.55514) (xy 145.643703 79.555127) - (xy 145.556102 79.424024) (xy 145.556099 79.42402) (xy 145.463415 79.331336) (xy 145.42993 79.270013) - (xy 145.434914 79.200321) (xy 145.476786 79.144388) (xy 145.482178 79.140571) (xy 145.510289 79.121789) - (xy 145.621789 79.010289) (xy 145.709394 78.879179) (xy 145.769737 78.733497) (xy 145.8005 78.578842) - (xy 145.8005 78.421158) (xy 145.8005 78.421155) (xy 145.800499 78.421153) (xy 145.786701 78.351788) - (xy 145.769737 78.266503) (xy 145.769735 78.266498) (xy 145.709397 78.120827) (xy 145.70939 78.120814) - (xy 145.621789 77.989711) (xy 145.621786 77.989707) (xy 145.510292 77.878213) (xy 145.510284 77.878207) - (xy 145.472712 77.853102) (xy 145.427906 77.79949) (xy 145.419199 77.730165) (xy 145.449353 77.667138) - (xy 145.472712 77.646898) (xy 145.499279 77.629145) (xy 145.510289 77.621789) (xy 145.621789 77.510289) - (xy 145.709394 77.379179) (xy 145.769737 77.233497) (xy 145.779684 77.183489) (xy 145.788655 77.138389) - (xy 149.3995 77.138389) (xy 149.3995 77.861611) (xy 149.407067 77.90939) (xy 149.421497 78.000499) - (xy 149.426598 78.032701) (xy 149.472839 78.175016) (xy 149.480128 78.197447) (xy 149.515317 78.26651) - (xy 149.558768 78.351788) (xy 149.660586 78.491928) (xy 149.783072 78.614414) (xy 149.923212 78.716232) - (xy 150.077555 78.794873) (xy 150.242299 78.848402) (xy 150.413389 78.8755) (xy 150.41339 78.8755) - (xy 150.58661 78.8755) (xy 150.586611 78.8755) (xy 150.757701 78.848402) (xy 150.922445 78.794873) - (xy 151.076788 78.716232) (xy 151.216928 78.614414) (xy 151.324472 78.506869) (xy 151.385791 78.473387) - (xy 151.455483 78.478371) (xy 151.511417 78.520242) (xy 151.517688 78.529456) (xy 151.557285 78.593652) - (xy 151.557288 78.593656) (xy 151.681344 78.717712) (xy 151.830666 78.809814) (xy 151.997203 78.864999) - (xy 152.099991 78.8755) (xy 152.900008 78.875499) (xy 152.900016 78.875498) (xy 152.900019 78.875498) - (xy 152.956302 78.869748) (xy 153.002797 78.864999) (xy 153.169334 78.809814) (xy 153.318656 78.717712) - (xy 153.442712 78.593656) (xy 153.534814 78.444334) (xy 153.589999 78.277797) (xy 153.6005 78.175009) - (xy 153.600499 76.824992) (xy 153.589999 76.722203) (xy 153.534814 76.555666) (xy 153.442712 76.406344) - (xy 153.318656 76.282288) (xy 153.193559 76.205128) (xy 153.169336 76.190187) (xy 153.169331 76.190185) - (xy 153.139382 76.180261) (xy 153.002797 76.135001) (xy 153.002795 76.135) (xy 152.90001 76.1245) - (xy 152.099998 76.1245) (xy 152.09998 76.124501) (xy 151.997203 76.135) (xy 151.9972 76.135001) + (xy 133.512549 86.162894) (xy 133.475 86.399974) (xy 120.2505 86.399974) (xy 120.2505 83.921153) + (xy 125.958449 83.921153) (xy 125.958449 84.078846) (xy 125.98921 84.233489) (xy 125.989213 84.233501) + (xy 126.049551 84.379172) (xy 126.049558 84.379185) (xy 126.137159 84.510288) (xy 126.137162 84.510292) + (xy 126.248656 84.621786) (xy 126.24866 84.621789) (xy 126.379763 84.70939) (xy 126.379776 84.709397) + (xy 126.517632 84.766498) (xy 126.525452 84.769737) (xy 126.680102 84.800499) (xy 126.680105 84.8005) + (xy 126.680107 84.8005) (xy 126.837793 84.8005) (xy 126.837794 84.800499) (xy 126.992446 84.769737) + (xy 127.138128 84.709394) (xy 127.269238 84.621789) (xy 127.380738 84.510289) (xy 127.440297 84.421153) + (xy 141.1995 84.421153) (xy 141.1995 84.578846) (xy 141.230261 84.733489) (xy 141.230264 84.733501) + (xy 141.290602 84.879172) (xy 141.290609 84.879185) (xy 141.37821 85.010288) (xy 141.378213 85.010292) + (xy 141.489707 85.121786) (xy 141.489711 85.121789) (xy 141.620814 85.20939) (xy 141.620827 85.209397) + (xy 141.758683 85.266498) (xy 141.766503 85.269737) (xy 141.921153 85.300499) (xy 141.921156 85.3005) + (xy 141.921158 85.3005) (xy 142.078844 85.3005) (xy 142.078845 85.300499) (xy 142.233497 85.269737) + (xy 142.363943 85.215705) (xy 142.379172 85.209397) (xy 142.379172 85.209396) (xy 142.379179 85.209394) + (xy 142.510289 85.121789) (xy 142.621789 85.010289) (xy 142.635539 84.989711) (xy 142.646898 84.972712) + (xy 142.70051 84.927906) (xy 142.769835 84.919199) (xy 142.832862 84.949353) (xy 142.853102 84.972712) + (xy 142.878207 85.010284) (xy 142.878213 85.010292) (xy 142.989707 85.121786) (xy 142.989711 85.121789) + (xy 143.120814 85.20939) (xy 143.120827 85.209397) (xy 143.258683 85.266498) (xy 143.266503 85.269737) + (xy 143.421153 85.300499) (xy 143.421156 85.3005) (xy 143.421158 85.3005) (xy 143.578844 85.3005) + (xy 143.578845 85.300499) (xy 143.589179 85.298443) (xy 143.614287 85.29345) (xy 143.614292 85.293449) + (xy 143.6998 85.276439) (xy 143.733497 85.269737) (xy 143.863943 85.215705) (xy 143.879172 85.209397) + (xy 143.879172 85.209396) (xy 143.879179 85.209394) (xy 144.010289 85.121789) (xy 144.121789 85.010289) + (xy 144.209394 84.879179) (xy 144.269737 84.733497) (xy 144.3005 84.578842) (xy 144.3005 84.421158) + (xy 144.3005 84.421155) (xy 144.300499 84.421153) (xy 144.274531 84.290606) (xy 144.269737 84.266503) + (xy 144.256062 84.233489) (xy 144.209397 84.120827) (xy 144.20939 84.120814) (xy 144.121789 83.989711) + (xy 144.121786 83.989707) (xy 144.010292 83.878213) (xy 144.010288 83.87821) (xy 143.879185 83.790609) + (xy 143.879172 83.790602) (xy 143.733501 83.730264) (xy 143.733489 83.730261) (xy 143.578845 83.6995) + (xy 143.578842 83.6995) (xy 143.421158 83.6995) (xy 143.421155 83.6995) (xy 143.26651 83.730261) + (xy 143.266498 83.730264) (xy 143.120827 83.790602) (xy 143.120814 83.790609) (xy 142.989711 83.87821) + (xy 142.989707 83.878213) (xy 142.878213 83.989707) (xy 142.853102 84.027289) (xy 142.799489 84.072093) + (xy 142.730164 84.0808) (xy 142.667137 84.050645) (xy 142.646898 84.027289) (xy 142.621786 83.989707) + (xy 142.510292 83.878213) (xy 142.510288 83.87821) (xy 142.379185 83.790609) (xy 142.379172 83.790602) + (xy 142.233501 83.730264) (xy 142.233489 83.730261) (xy 142.078845 83.6995) (xy 142.078842 83.6995) + (xy 141.921158 83.6995) (xy 141.921155 83.6995) (xy 141.76651 83.730261) (xy 141.766498 83.730264) + (xy 141.620827 83.790602) (xy 141.620814 83.790609) (xy 141.489711 83.87821) (xy 141.489707 83.878213) + (xy 141.378213 83.989707) (xy 141.37821 83.989711) (xy 141.290609 84.120814) (xy 141.290602 84.120827) + (xy 141.230264 84.266498) (xy 141.230261 84.26651) (xy 141.1995 84.421153) (xy 127.440297 84.421153) + (xy 127.468343 84.379179) (xy 127.528686 84.233497) (xy 127.559449 84.078842) (xy 127.559449 83.921158) + (xy 127.559449 83.921155) (xy 127.559448 83.921153) (xy 127.53348 83.790606) (xy 127.528686 83.766503) + (xy 127.528684 83.766498) (xy 127.468346 83.620827) (xy 127.468339 83.620814) (xy 127.380738 83.489711) + (xy 127.380735 83.489707) (xy 127.269241 83.378213) (xy 127.269237 83.37821) (xy 127.138134 83.290609) + (xy 127.138121 83.290602) (xy 126.99245 83.230264) (xy 126.992438 83.230261) (xy 126.837794 83.1995) + (xy 126.837791 83.1995) (xy 126.680107 83.1995) (xy 126.680104 83.1995) (xy 126.525459 83.230261) + (xy 126.525447 83.230264) (xy 126.379776 83.290602) (xy 126.379763 83.290609) (xy 126.24866 83.37821) + (xy 126.248656 83.378213) (xy 126.137162 83.489707) (xy 126.137159 83.489711) (xy 126.049558 83.620814) + (xy 126.049551 83.620827) (xy 125.989213 83.766498) (xy 125.98921 83.76651) (xy 125.958449 83.921153) + (xy 120.2505 83.921153) (xy 120.2505 78.721153) (xy 132.5495 78.721153) (xy 132.5495 78.878846) + (xy 132.580261 79.033489) (xy 132.580264 79.033501) (xy 132.640602 79.179172) (xy 132.640609 79.179185) + (xy 132.72821 79.310288) (xy 132.728213 79.310292) (xy 132.839707 79.421786) (xy 132.839711 79.421789) + (xy 132.975886 79.512779) (xy 132.974515 79.51483) (xy 133.016636 79.55617) (xy 133.032125 79.624301) + (xy 133.008321 79.689991) (xy 132.977256 79.719713) (xy 132.889713 79.778208) (xy 132.889707 79.778213) + (xy 132.778213 79.889707) (xy 132.77821 79.889711) (xy 132.690609 80.020814) (xy 132.690602 80.020827) + (xy 132.630264 80.166498) (xy 132.630261 80.16651) (xy 132.5995 80.321153) (xy 132.5995 80.478846) + (xy 132.630261 80.633489) (xy 132.630264 80.633501) (xy 132.690602 80.779172) (xy 132.690609 80.779185) + (xy 132.77821 80.910288) (xy 132.778213 80.910292) (xy 132.889707 81.021786) (xy 132.889711 81.021789) + (xy 133.020814 81.10939) (xy 133.020827 81.109397) (xy 133.166498 81.169735) (xy 133.166503 81.169737) + (xy 133.321153 81.200499) (xy 133.321156 81.2005) (xy 133.321158 81.2005) (xy 133.478844 81.2005) + (xy 133.478845 81.200499) (xy 133.633497 81.169737) (xy 133.779179 81.109394) (xy 133.89008 81.035291) + (xy 133.956757 81.014414) (xy 134.024137 81.032898) (xy 134.070828 81.084877) (xy 134.073532 81.090942) + (xy 134.090602 81.132156) (xy 134.090609 81.132168) (xy 134.17821 81.263271) (xy 134.178213 81.263275) + (xy 134.289707 81.374769) (xy 134.289711 81.374772) (xy 134.420814 81.462373) (xy 134.420827 81.46238) + (xy 134.536499 81.510292) (xy 134.566503 81.52272) (xy 134.721153 81.553482) (xy 134.721156 81.553483) + (xy 134.721158 81.553483) (xy 134.878844 81.553483) (xy 134.878845 81.553482) (xy 135.033497 81.52272) + (xy 135.179179 81.462377) (xy 135.310289 81.374772) (xy 135.421789 81.263272) (xy 135.509394 81.132162) + (xy 135.518824 81.109397) (xy 135.53148 81.078842) (xy 135.569737 80.98648) (xy 135.6005 80.831825) + (xy 135.6005 80.731941) (xy 135.620185 80.664902) (xy 135.672989 80.619147) (xy 135.742147 80.609203) + (xy 135.805703 80.638228) (xy 135.812181 80.64426) (xy 135.889707 80.721786) (xy 135.889711 80.721789) + (xy 136.020814 80.80939) (xy 136.020827 80.809397) (xy 136.083424 80.835325) (xy 136.166503 80.869737) + (xy 136.321153 80.900499) (xy 136.321156 80.9005) (xy 136.321158 80.9005) (xy 136.478843 80.9005) + (xy 136.494564 80.897372) (xy 136.551309 80.886085) (xy 136.620899 80.892312) (xy 136.676077 80.935174) + (xy 136.699322 81.001063) (xy 136.6995 81.007702) (xy 136.6995 81.078846) (xy 136.730261 81.233489) + (xy 136.730264 81.233501) (xy 136.790602 81.379172) (xy 136.790609 81.379185) (xy 136.87821 81.510288) + (xy 136.878213 81.510292) (xy 136.989707 81.621786) (xy 136.989711 81.621789) (xy 137.120814 81.70939) + (xy 137.120827 81.709397) (xy 137.266498 81.769735) (xy 137.266503 81.769737) (xy 137.421153 81.800499) + (xy 137.421156 81.8005) (xy 137.421158 81.8005) (xy 137.578844 81.8005) (xy 137.578845 81.800499) + (xy 137.733497 81.769737) (xy 137.879179 81.709394) (xy 138.010289 81.621789) (xy 138.121789 81.510289) + (xy 138.209394 81.379179) (xy 138.21122 81.374772) (xy 138.241984 81.300499) (xy 138.269737 81.233497) + (xy 138.3005 81.078842) (xy 138.3005 80.921158) (xy 138.3005 80.921155) (xy 138.300499 80.921153) + (xy 138.290271 80.869735) (xy 138.269737 80.766503) (xy 138.245892 80.708935) (xy 138.209397 80.620827) + (xy 138.20939 80.620814) (xy 138.121789 80.489711) (xy 138.121786 80.489707) (xy 138.010292 80.378213) + (xy 138.010288 80.37821) (xy 137.879185 80.290609) (xy 137.879172 80.290602) (xy 137.733501 80.230264) + (xy 137.733489 80.230261) (xy 137.578845 80.1995) (xy 137.578842 80.1995) (xy 137.421158 80.1995) + (xy 137.421155 80.1995) (xy 137.348691 80.213914) (xy 137.2791 80.207687) (xy 137.223922 80.164824) + (xy 137.200678 80.098934) (xy 137.2005 80.092297) (xy 137.2005 80.021155) (xy 137.200499 80.021153) + (xy 137.192958 79.983244) (xy 137.169737 79.866503) (xy 137.169735 79.866498) (xy 137.109397 79.720827) + (xy 137.10939 79.720814) (xy 137.021789 79.589711) (xy 137.021786 79.589707) (xy 136.910292 79.478213) + (xy 136.910288 79.47821) (xy 136.820429 79.418168) (xy 136.779185 79.390609) (xy 136.779172 79.390602) + (xy 136.633501 79.330264) (xy 136.633489 79.330261) (xy 136.587701 79.321153) (xy 138.7995 79.321153) + (xy 138.7995 79.478846) (xy 138.830261 79.633489) (xy 138.830264 79.633501) (xy 138.890602 79.779172) + (xy 138.890609 79.779185) (xy 138.97821 79.910288) (xy 138.978213 79.910292) (xy 139.089707 80.021786) + (xy 139.089711 80.021789) (xy 139.220814 80.10939) (xy 139.220827 80.109397) (xy 139.354642 80.164824) + (xy 139.366503 80.169737) (xy 139.516131 80.1995) (xy 139.521153 80.200499) (xy 139.521156 80.2005) + (xy 139.521158 80.2005) (xy 139.678844 80.2005) (xy 139.678845 80.200499) (xy 139.833497 80.169737) + (xy 139.951592 80.120821) (xy 139.979172 80.109397) (xy 139.979172 80.109396) (xy 139.979179 80.109394) + (xy 140.110289 80.021789) (xy 140.221789 79.910289) (xy 140.309394 79.779179) (xy 140.369737 79.633497) + (xy 140.4005 79.478842) (xy 140.4005 79.321158) (xy 140.4005 79.321155) (xy 140.400499 79.321153) + (xy 140.394287 79.289924) (xy 140.369737 79.166503) (xy 140.360577 79.144388) (xy 140.309397 79.020827) + (xy 140.30939 79.020814) (xy 140.221789 78.889711) (xy 140.221786 78.889707) (xy 140.110292 78.778213) + (xy 140.110288 78.77821) (xy 139.979185 78.690609) (xy 139.979172 78.690602) (xy 139.833501 78.630264) + (xy 139.833489 78.630261) (xy 139.678845 78.5995) (xy 139.678842 78.5995) (xy 139.521158 78.5995) + (xy 139.521155 78.5995) (xy 139.36651 78.630261) (xy 139.366498 78.630264) (xy 139.220827 78.690602) + (xy 139.220814 78.690609) (xy 139.089711 78.77821) (xy 139.089707 78.778213) (xy 138.978213 78.889707) + (xy 138.97821 78.889711) (xy 138.890609 79.020814) (xy 138.890602 79.020827) (xy 138.830264 79.166498) + (xy 138.830261 79.16651) (xy 138.7995 79.321153) (xy 136.587701 79.321153) (xy 136.478845 79.2995) + (xy 136.478842 79.2995) (xy 136.321158 79.2995) (xy 136.321155 79.2995) (xy 136.16651 79.330261) + (xy 136.166498 79.330264) (xy 136.020827 79.390602) (xy 136.020814 79.390609) (xy 135.889711 79.47821) + (xy 135.889707 79.478213) (xy 135.778213 79.589707) (xy 135.77821 79.589711) (xy 135.690609 79.720814) + (xy 135.690602 79.720827) (xy 135.630264 79.866498) (xy 135.630261 79.86651) (xy 135.5995 80.021153) + (xy 135.5995 80.121042) (xy 135.579815 80.188081) (xy 135.527011 80.233836) (xy 135.457853 80.24378) + (xy 135.394297 80.214755) (xy 135.387819 80.208723) (xy 135.310292 80.131196) (xy 135.310288 80.131193) + (xy 135.179185 80.043592) (xy 135.179172 80.043585) (xy 135.033501 79.983247) (xy 135.033489 79.983244) + (xy 134.878845 79.952483) (xy 134.878842 79.952483) (xy 134.721158 79.952483) (xy 134.721155 79.952483) + (xy 134.56651 79.983244) (xy 134.566498 79.983247) (xy 134.420827 80.043585) (xy 134.420816 80.043591) + (xy 134.309918 80.117691) (xy 134.243241 80.138568) (xy 134.175861 80.120083) (xy 134.129171 80.068104) + (xy 134.126473 80.062054) (xy 134.109394 80.020821) (xy 134.109392 80.020818) (xy 134.10939 80.020814) + (xy 134.021789 79.889711) (xy 134.021786 79.889707) (xy 133.910292 79.778213) (xy 133.910288 79.77821) + (xy 133.774114 79.687221) (xy 133.77548 79.685175) (xy 133.733347 79.6438) (xy 133.717876 79.575665) + (xy 133.741697 79.509981) (xy 133.772744 79.480285) (xy 133.795535 79.465055) (xy 133.860289 79.421789) + (xy 133.971789 79.310289) (xy 134.059394 79.179179) (xy 134.065558 79.164299) (xy 134.075394 79.140551) + (xy 134.119737 79.033497) (xy 134.1505 78.878842) (xy 134.1505 78.721158) (xy 134.1505 78.721155) + (xy 134.150499 78.721153) (xy 134.129267 78.614414) (xy 134.119737 78.566503) (xy 134.088848 78.491929) + (xy 134.059397 78.420827) (xy 134.05939 78.420814) (xy 133.971789 78.289711) (xy 133.971786 78.289707) + (xy 133.860292 78.178213) (xy 133.860288 78.17821) (xy 133.729185 78.090609) (xy 133.729172 78.090602) + (xy 133.583501 78.030264) (xy 133.583489 78.030261) (xy 133.428845 77.9995) (xy 133.428842 77.9995) + (xy 133.271158 77.9995) (xy 133.271155 77.9995) (xy 133.11651 78.030261) (xy 133.116498 78.030264) + (xy 132.970827 78.090602) (xy 132.970814 78.090609) (xy 132.839711 78.17821) (xy 132.839707 78.178213) + (xy 132.728213 78.289707) (xy 132.72821 78.289711) (xy 132.640609 78.420814) (xy 132.640602 78.420827) + (xy 132.580264 78.566498) (xy 132.580261 78.56651) (xy 132.5495 78.721153) (xy 120.2505 78.721153) + (xy 120.2505 76.821153) (xy 125.8995 76.821153) (xy 125.8995 76.978846) (xy 125.930261 77.133489) + (xy 125.930264 77.133501) (xy 125.990602 77.279172) (xy 125.990609 77.279185) (xy 126.07821 77.410288) + (xy 126.078213 77.410292) (xy 126.189707 77.521786) (xy 126.189711 77.521789) (xy 126.320814 77.60939) + (xy 126.320827 77.609397) (xy 126.411364 77.646898) (xy 126.466503 77.669737) (xy 126.621153 77.700499) + (xy 126.621156 77.7005) (xy 126.621158 77.7005) (xy 126.778844 77.7005) (xy 126.778845 77.700499) + (xy 126.933497 77.669737) (xy 127.079179 77.609394) (xy 127.210289 77.521789) (xy 127.321789 77.410289) + (xy 127.409394 77.279179) (xy 127.420043 77.253468) (xy 127.463884 77.199065) (xy 127.530178 77.176999) + (xy 127.597877 77.194277) (xy 127.603497 77.197819) (xy 127.620813 77.209389) (xy 127.620815 77.20939) + (xy 127.620821 77.209394) (xy 127.620823 77.209395) (xy 127.620827 77.209397) (xy 127.727228 77.253469) + (xy 127.766503 77.269737) (xy 127.921153 77.300499) (xy 127.921156 77.3005) (xy 127.921158 77.3005) + (xy 128.078844 77.3005) (xy 128.078845 77.300499) (xy 128.233497 77.269737) (xy 128.379179 77.209394) + (xy 128.510289 77.121789) (xy 128.510925 77.121153) (xy 130.1495 77.121153) (xy 130.1495 77.278846) + (xy 130.180261 77.433489) (xy 130.180264 77.433501) (xy 130.240602 77.579172) (xy 130.240609 77.579185) + (xy 130.32821 77.710288) (xy 130.328213 77.710292) (xy 130.439707 77.821786) (xy 130.439711 77.821789) + (xy 130.570814 77.90939) (xy 130.570827 77.909397) (xy 130.716498 77.969735) (xy 130.716503 77.969737) + (xy 130.866131 77.9995) (xy 130.871153 78.000499) (xy 130.871156 78.0005) (xy 130.871158 78.0005) + (xy 131.028844 78.0005) (xy 131.028845 78.000499) (xy 131.183497 77.969737) (xy 131.329179 77.909394) + (xy 131.460289 77.821789) (xy 131.571789 77.710289) (xy 131.659394 77.579179) (xy 131.719737 77.433497) + (xy 131.7505 77.278842) (xy 131.7505 77.121158) (xy 131.7505 77.121155) (xy 131.750499 77.121153) + (xy 131.747698 77.107071) (xy 131.719737 76.966503) (xy 131.700955 76.921158) (xy 131.659397 76.820827) + (xy 131.65939 76.820814) (xy 131.571789 76.689711) (xy 131.571786 76.689707) (xy 131.460292 76.578213) + (xy 131.460288 76.57821) (xy 131.329185 76.490609) (xy 131.329172 76.490602) (xy 131.183501 76.430264) + (xy 131.183489 76.430261) (xy 131.028845 76.3995) (xy 131.028842 76.3995) (xy 130.871158 76.3995) + (xy 130.871155 76.3995) (xy 130.71651 76.430261) (xy 130.716498 76.430264) (xy 130.570827 76.490602) + (xy 130.570814 76.490609) (xy 130.439711 76.57821) (xy 130.439707 76.578213) (xy 130.328213 76.689707) + (xy 130.32821 76.689711) (xy 130.240609 76.820814) (xy 130.240602 76.820827) (xy 130.180264 76.966498) + (xy 130.180261 76.96651) (xy 130.1495 77.121153) (xy 128.510925 77.121153) (xy 128.553236 77.078842) + (xy 128.604694 77.027385) (xy 128.621786 77.010292) (xy 128.621789 77.010289) (xy 128.709394 76.879179) + (xy 128.769737 76.733497) (xy 128.8005 76.578842) (xy 128.8005 76.421158) (xy 128.8005 76.421155) + (xy 128.800499 76.421153) (xy 128.774264 76.289257) (xy 128.770662 76.271153) (xy 132.5495 76.271153) + (xy 132.5495 76.428846) (xy 132.580261 76.583489) (xy 132.580264 76.583501) (xy 132.640602 76.729172) + (xy 132.640609 76.729185) (xy 132.72821 76.860288) (xy 132.728213 76.860292) (xy 132.839707 76.971786) + (xy 132.839711 76.971789) (xy 132.970814 77.05939) (xy 132.970827 77.059397) (xy 133.091366 77.109325) + (xy 133.116503 77.119737) (xy 133.271153 77.150499) (xy 133.271156 77.1505) (xy 133.271158 77.1505) + (xy 133.428844 77.1505) (xy 133.428845 77.150499) (xy 133.576378 77.121153) (xy 142.7995 77.121153) + (xy 142.7995 77.278846) (xy 142.830261 77.433489) (xy 142.830264 77.433501) (xy 142.890602 77.579172) + (xy 142.890609 77.579185) (xy 142.97821 77.710288) (xy 142.978213 77.710292) (xy 143.089707 77.821786) + (xy 143.089711 77.821789) (xy 143.220814 77.90939) (xy 143.220827 77.909397) (xy 143.366498 77.969735) + (xy 143.366503 77.969737) (xy 143.516131 77.9995) (xy 143.521153 78.000499) (xy 143.521156 78.0005) + (xy 143.521158 78.0005) (xy 143.678844 78.0005) (xy 143.678845 78.000499) (xy 143.833497 77.969737) + (xy 143.979179 77.909394) (xy 144.110289 77.821789) (xy 144.221789 77.710289) (xy 144.264146 77.646898) + (xy 144.280608 77.622261) (xy 144.33422 77.577455) (xy 144.403545 77.568748) (xy 144.466572 77.598902) + (xy 144.471391 77.60347) (xy 144.489707 77.621786) (xy 144.48971 77.621788) (xy 144.489711 77.621789) + (xy 144.515219 77.638833) (xy 144.527289 77.646898) (xy 144.572093 77.700511) (xy 144.5808 77.769836) + (xy 144.550645 77.832863) (xy 144.527289 77.853102) (xy 144.489707 77.878213) (xy 144.378213 77.989707) + (xy 144.37821 77.989711) (xy 144.290609 78.120814) (xy 144.290602 78.120827) (xy 144.230264 78.266498) + (xy 144.230261 78.26651) (xy 144.1995 78.421153) (xy 144.1995 78.578846) (xy 144.230261 78.733489) + (xy 144.230264 78.733501) (xy 144.290602 78.879172) (xy 144.290609 78.879185) (xy 144.37821 79.010288) + (xy 144.378213 79.010292) (xy 144.470897 79.102976) (xy 144.504382 79.164299) (xy 144.499398 79.233991) + (xy 144.457526 79.289924) (xy 144.452107 79.293759) (xy 144.424024 79.312523) (xy 144.42402 79.312526) + (xy 144.312526 79.42402) (xy 144.312523 79.424024) (xy 144.224922 79.555127) (xy 144.224915 79.55514) + (xy 144.164577 79.700811) (xy 144.164574 79.700823) (xy 144.133813 79.855466) (xy 144.133813 80.013159) + (xy 144.164574 80.167802) (xy 144.164577 80.167814) (xy 144.224915 80.313485) (xy 144.224922 80.313498) + (xy 144.312523 80.444601) (xy 144.312526 80.444605) (xy 144.42402 80.556099) (xy 144.424024 80.556102) + (xy 144.555127 80.643703) (xy 144.55514 80.64371) (xy 144.674184 80.693019) (xy 144.728588 80.736859) + (xy 144.741293 80.760127) (xy 144.790604 80.879176) (xy 144.790609 80.879185) (xy 144.87821 81.010288) + (xy 144.878213 81.010292) (xy 144.989707 81.121786) (xy 144.989711 81.121789) (xy 145.120814 81.20939) + (xy 145.120827 81.209397) (xy 145.250895 81.263272) (xy 145.266503 81.269737) (xy 145.421153 81.300499) + (xy 145.421156 81.3005) (xy 145.421158 81.3005) (xy 145.578844 81.3005) (xy 145.578845 81.300499) + (xy 145.733497 81.269737) (xy 145.879179 81.209394) (xy 146.010289 81.121789) (xy 146.121789 81.010289) + (xy 146.209394 80.879179) (xy 146.269737 80.733497) (xy 146.3005 80.578842) (xy 146.3005 80.421158) + (xy 146.3005 80.421155) (xy 146.300499 80.421153) (xy 146.283063 80.333497) (xy 146.269737 80.266503) + (xy 146.256206 80.233836) (xy 146.209397 80.120827) (xy 146.20939 80.120814) (xy 146.121789 79.989711) + (xy 146.121786 79.989707) (xy 146.010292 79.878213) (xy 146.010288 79.87821) (xy 145.879185 79.790609) + (xy 145.879176 79.790604) (xy 145.760127 79.741293) (xy 145.705724 79.697452) (xy 145.693019 79.674184) + (xy 145.64371 79.55514) (xy 145.643703 79.555127) (xy 145.556102 79.424024) (xy 145.556099 79.42402) + (xy 145.463415 79.331336) (xy 145.42993 79.270013) (xy 145.434914 79.200321) (xy 145.476786 79.144388) + (xy 145.482178 79.140571) (xy 145.510289 79.121789) (xy 145.621789 79.010289) (xy 145.709394 78.879179) + (xy 145.769737 78.733497) (xy 145.8005 78.578842) (xy 145.8005 78.421158) (xy 145.8005 78.421155) + (xy 145.800499 78.421153) (xy 145.774353 78.289711) (xy 145.769737 78.266503) (xy 145.769735 78.266498) + (xy 145.709397 78.120827) (xy 145.70939 78.120814) (xy 145.621789 77.989711) (xy 145.621786 77.989707) + (xy 145.510292 77.878213) (xy 145.510284 77.878207) (xy 145.472712 77.853102) (xy 145.427906 77.79949) + (xy 145.419199 77.730165) (xy 145.449353 77.667138) (xy 145.472712 77.646898) (xy 145.499279 77.629145) + (xy 145.510289 77.621789) (xy 145.621789 77.510289) (xy 145.709394 77.379179) (xy 145.769737 77.233497) + (xy 145.780975 77.176999) (xy 145.788655 77.138389) (xy 149.3995 77.138389) (xy 149.3995 77.861611) + (xy 149.407067 77.90939) (xy 149.426211 78.030263) (xy 149.426598 78.032701) (xy 149.473877 78.178211) + (xy 149.480128 78.197447) (xy 149.515317 78.26651) (xy 149.558768 78.351788) (xy 149.660586 78.491928) + (xy 149.783072 78.614414) (xy 149.923212 78.716232) (xy 150.077555 78.794873) (xy 150.242299 78.848402) + (xy 150.413389 78.8755) (xy 150.41339 78.8755) (xy 150.58661 78.8755) (xy 150.586611 78.8755) (xy 150.757701 78.848402) + (xy 150.922445 78.794873) (xy 151.076788 78.716232) (xy 151.216928 78.614414) (xy 151.324472 78.506869) + (xy 151.385791 78.473387) (xy 151.455483 78.478371) (xy 151.511417 78.520242) (xy 151.517688 78.529456) + (xy 151.557285 78.593652) (xy 151.557288 78.593656) (xy 151.681344 78.717712) (xy 151.830666 78.809814) + (xy 151.997203 78.864999) (xy 152.099991 78.8755) (xy 152.900008 78.875499) (xy 152.900016 78.875498) + (xy 152.900019 78.875498) (xy 152.956302 78.869748) (xy 153.002797 78.864999) (xy 153.169334 78.809814) + (xy 153.318656 78.717712) (xy 153.442712 78.593656) (xy 153.534814 78.444334) (xy 153.589999 78.277797) + (xy 153.6005 78.175009) (xy 153.600499 76.824992) (xy 153.589999 76.722203) (xy 153.534814 76.555666) + (xy 153.442712 76.406344) (xy 153.318656 76.282288) (xy 153.193559 76.205128) (xy 153.169336 76.190187) + (xy 153.169331 76.190185) (xy 153.167862 76.189698) (xy 153.002797 76.135001) (xy 153.002795 76.135) + (xy 152.90001 76.1245) (xy 152.099998 76.1245) (xy 152.09998 76.124501) (xy 151.997203 76.135) (xy 151.9972 76.135001) (xy 151.830668 76.190185) (xy 151.830663 76.190187) (xy 151.681342 76.282289) (xy 151.557287 76.406344) (xy 151.517688 76.470544) (xy 151.465739 76.517268) (xy 151.396777 76.528489) (xy 151.332695 76.500645) (xy 151.324469 76.493127) (xy 151.21693 76.385588) (xy 151.216928 76.385586) (xy 151.076788 76.283768) (xy 150.922445 76.205127) (xy 150.757701 76.151598) (xy 150.757699 76.151597) (xy 150.757698 76.151597) - (xy 150.626271 76.130781) (xy 150.586611 76.1245) (xy 150.413389 76.1245) (xy 150.373728 76.130781) - (xy 150.242302 76.151597) (xy 150.077552 76.205128) (xy 149.923211 76.283768) (xy 149.862039 76.328213) + (xy 150.622997 76.130263) (xy 150.586611 76.1245) (xy 150.413389 76.1245) (xy 150.377003 76.130263) + (xy 150.242302 76.151597) (xy 150.077552 76.205128) (xy 149.923211 76.283768) (xy 149.843256 76.341859) (xy 149.783072 76.385586) (xy 149.78307 76.385588) (xy 149.783069 76.385588) (xy 149.660588 76.508069) - (xy 149.660588 76.50807) (xy 149.660586 76.508072) (xy 149.653905 76.517268) (xy 149.558768 76.648211) - (xy 149.480128 76.802552) (xy 149.426597 76.967302) (xy 149.410148 77.071158) (xy 149.3995 77.138389) + (xy 149.660588 76.50807) (xy 149.660586 76.508072) (xy 149.651319 76.520827) (xy 149.558768 76.648211) + (xy 149.480128 76.802552) (xy 149.426597 76.967302) (xy 149.402454 77.119737) (xy 149.3995 77.138389) (xy 145.788655 77.138389) (xy 145.794437 77.109325) (xy 145.794437 77.109324) (xy 145.800499 77.078846) - (xy 145.8005 77.078844) (xy 145.8005 76.921155) (xy 145.800499 76.921153) (xy 145.79215 76.879179) - (xy 145.769737 76.766503) (xy 145.753344 76.726926) (xy 145.709397 76.620827) (xy 145.70939 76.620814) + (xy 145.8005 77.078844) (xy 145.8005 76.921155) (xy 145.800499 76.921153) (xy 145.781369 76.824981) + (xy 145.769737 76.766503) (xy 145.756062 76.733489) (xy 145.709397 76.620827) (xy 145.70939 76.620814) (xy 145.621789 76.489711) (xy 145.621786 76.489707) (xy 145.510292 76.378213) (xy 145.510288 76.37821) (xy 145.379185 76.290609) (xy 145.379172 76.290602) (xy 145.233501 76.230264) (xy 145.233489 76.230261) (xy 145.078845 76.1995) (xy 145.078842 76.1995) (xy 144.921158 76.1995) (xy 144.921155 76.1995) @@ -40541,9 +41263,9 @@ (xy 143.521158 76.3995) (xy 143.521155 76.3995) (xy 143.36651 76.430261) (xy 143.366498 76.430264) (xy 143.220827 76.490602) (xy 143.220814 76.490609) (xy 143.089711 76.57821) (xy 143.089707 76.578213) (xy 142.978213 76.689707) (xy 142.97821 76.689711) (xy 142.890609 76.820814) (xy 142.890602 76.820827) - (xy 142.830264 76.966498) (xy 142.830261 76.96651) (xy 142.7995 77.121153) (xy 134.1505 77.121153) - (xy 134.1505 77.071161) (xy 134.1505 77.071158) (xy 134.150499 77.071156) (xy 134.142083 77.028846) - (xy 134.119737 76.916506) (xy 134.070423 76.797452) (xy 134.062955 76.727984) (xy 134.070424 76.702549) + (xy 142.830264 76.966498) (xy 142.830261 76.96651) (xy 142.7995 77.121153) (xy 133.576378 77.121153) + (xy 133.583497 77.119737) (xy 133.729179 77.059394) (xy 133.729185 77.05939) (xy 133.800164 77.011964) + (xy 133.849733 76.978842) (xy 133.860289 76.971789) (xy 133.971789 76.860289) (xy 134.059394 76.729179) (xy 134.119737 76.583497) (xy 134.1505 76.428842) (xy 134.1505 76.271158) (xy 134.1505 76.271155) (xy 134.150499 76.271153) (xy 134.137366 76.205128) (xy 134.119737 76.116503) (xy 134.072398 76.002215) (xy 134.059397 75.970827) (xy 134.05939 75.970814) (xy 133.971789 75.839711) (xy 133.971786 75.839707) @@ -40553,306 +41275,310 @@ (xy 133.116498 75.580264) (xy 132.970827 75.640602) (xy 132.970814 75.640609) (xy 132.839711 75.72821) (xy 132.839707 75.728213) (xy 132.728213 75.839707) (xy 132.72821 75.839711) (xy 132.640609 75.970814) (xy 132.640602 75.970827) (xy 132.580264 76.116498) (xy 132.580261 76.11651) (xy 132.5495 76.271153) - (xy 131.324897 76.271153) (xy 131.279185 76.240609) (xy 131.279172 76.240602) (xy 131.133501 76.180264) - (xy 131.133489 76.180261) (xy 130.978845 76.1495) (xy 130.978842 76.1495) (xy 130.821158 76.1495) - (xy 130.821155 76.1495) (xy 130.66651 76.180261) (xy 130.666498 76.180264) (xy 130.520827 76.240602) - (xy 130.520814 76.240609) (xy 130.389711 76.32821) (xy 130.389707 76.328213) (xy 130.278213 76.439707) - (xy 130.27821 76.439711) (xy 130.190609 76.570814) (xy 130.190602 76.570827) (xy 130.130264 76.716498) - (xy 130.130261 76.71651) (xy 130.0995 76.871153) (xy 128.712719 76.871153) (xy 128.734895 76.817614) - (xy 128.734895 76.817613) (xy 128.741132 76.802555) (xy 128.769737 76.733497) (xy 128.8005 76.578842) - (xy 128.8005 76.421158) (xy 128.8005 76.421155) (xy 128.800499 76.421153) (xy 128.782012 76.328213) - (xy 128.769737 76.266503) (xy 128.769735 76.266498) (xy 128.709396 76.120825) (xy 128.709394 76.120822) - (xy 128.709394 76.120821) (xy 128.674694 76.068889) (xy 128.653816 76.002215) (xy 128.6723 75.934835) - (xy 128.674676 75.931136) (xy 128.709394 75.879179) (xy 128.769737 75.733497) (xy 128.8005 75.578842) - (xy 128.8005 75.521153) (xy 137.9995 75.521153) (xy 137.9995 75.678846) (xy 138.030261 75.833489) - (xy 138.030264 75.833501) (xy 138.090602 75.979172) (xy 138.090609 75.979185) (xy 138.17821 76.110288) - (xy 138.178213 76.110292) (xy 138.289707 76.221786) (xy 138.289711 76.221789) (xy 138.420814 76.30939) - (xy 138.420827 76.309397) (xy 138.466254 76.328213) (xy 138.566503 76.369737) (xy 138.716131 76.3995) - (xy 138.721153 76.400499) (xy 138.721156 76.4005) (xy 138.721158 76.4005) (xy 138.878844 76.4005) - (xy 138.878845 76.400499) (xy 139.033497 76.369737) (xy 139.179179 76.309394) (xy 139.310289 76.221789) - (xy 139.421789 76.110289) (xy 139.509394 75.979179) (xy 139.512854 75.970827) (xy 139.529305 75.931109) - (xy 139.569737 75.833497) (xy 139.6005 75.678842) (xy 139.6005 75.521158) (xy 139.6005 75.521155) - (xy 139.600499 75.521153) (xy 139.5957 75.497029) (xy 139.569737 75.366503) (xy 139.515092 75.234577) - (xy 139.509397 75.220827) (xy 139.50939 75.220814) (xy 139.421789 75.089711) (xy 139.421786 75.089707) - (xy 139.310292 74.978213) (xy 139.310288 74.97821) (xy 139.179185 74.890609) (xy 139.179172 74.890602) - (xy 139.033501 74.830264) (xy 139.033489 74.830261) (xy 138.878845 74.7995) (xy 138.878842 74.7995) - (xy 138.721158 74.7995) (xy 138.721155 74.7995) (xy 138.56651 74.830261) (xy 138.566498 74.830264) - (xy 138.420827 74.890602) (xy 138.420814 74.890609) (xy 138.289711 74.97821) (xy 138.289707 74.978213) - (xy 138.178213 75.089707) (xy 138.17821 75.089711) (xy 138.090609 75.220814) (xy 138.090602 75.220827) - (xy 138.030264 75.366498) (xy 138.030261 75.36651) (xy 137.9995 75.521153) (xy 128.8005 75.521153) - (xy 128.8005 75.421158) (xy 128.8005 75.421155) (xy 128.800499 75.421153) (xy 128.769738 75.26651) - (xy 128.769737 75.266503) (xy 128.750812 75.220814) (xy 128.709397 75.120827) (xy 128.70939 75.120814) - (xy 128.621789 74.989711) (xy 128.621786 74.989707) (xy 128.510292 74.878213) (xy 128.510288 74.87821) - (xy 128.379185 74.790609) (xy 128.379172 74.790602) (xy 128.233501 74.730264) (xy 128.233489 74.730261) - (xy 128.078845 74.6995) (xy 128.078842 74.6995) (xy 128.024838 74.6995) (xy 127.957799 74.679815) - (xy 127.912044 74.627011) (xy 127.910275 74.622949) (xy 127.909394 74.620821) (xy 127.909391 74.620816) - (xy 127.90939 74.620814) (xy 127.821789 74.489711) (xy 127.821786 74.489707) (xy 127.710292 74.378213) - (xy 127.710288 74.37821) (xy 127.579185 74.290609) (xy 127.579172 74.290602) (xy 127.433501 74.230264) - (xy 127.433489 74.230261) (xy 127.278845 74.1995) (xy 127.278842 74.1995) (xy 127.121158 74.1995) - (xy 127.121155 74.1995) (xy 126.96651 74.230261) (xy 126.966498 74.230264) (xy 126.820827 74.290602) - (xy 126.820814 74.290609) (xy 126.689711 74.37821) (xy 126.689707 74.378213) (xy 126.578213 74.489707) - (xy 126.57821 74.489711) (xy 126.490609 74.620814) (xy 126.490602 74.620827) (xy 126.430264 74.766498) - (xy 126.430261 74.76651) (xy 126.3995 74.921153) (xy 120.2505 74.921153) (xy 120.2505 73.821153) - (xy 130.4495 73.821153) (xy 130.4495 73.978846) (xy 130.480261 74.133489) (xy 130.480264 74.133501) - (xy 130.540602 74.279172) (xy 130.540609 74.279185) (xy 130.62821 74.410288) (xy 130.628213 74.410292) - (xy 130.739707 74.521786) (xy 130.739711 74.521789) (xy 130.870814 74.60939) (xy 130.870827 74.609397) - (xy 131.005378 74.665129) (xy 131.016503 74.669737) (xy 131.166131 74.6995) (xy 131.171153 74.700499) - (xy 131.171156 74.7005) (xy 131.171158 74.7005) (xy 131.328844 74.7005) (xy 131.328845 74.700499) - (xy 131.483497 74.669737) (xy 131.601596 74.620819) (xy 131.629172 74.609397) (xy 131.629172 74.609396) - (xy 131.629179 74.609394) (xy 131.760289 74.521789) (xy 131.871789 74.410289) (xy 131.959394 74.279179) - (xy 132.019737 74.133497) (xy 132.0505 73.978842) (xy 132.0505 73.821158) (xy 132.0505 73.821155) - (xy 132.050499 73.821153) (xy 132.024264 73.689257) (xy 132.020662 73.671153) (xy 138.4495 73.671153) - (xy 138.4495 73.828846) (xy 138.480261 73.983489) (xy 138.480264 73.983501) (xy 138.540602 74.129172) - (xy 138.540609 74.129185) (xy 138.62821 74.260288) (xy 138.628213 74.260292) (xy 138.739707 74.371786) - (xy 138.739711 74.371789) (xy 138.870814 74.45939) (xy 138.870827 74.459397) (xy 139.016498 74.519735) - (xy 139.016503 74.519737) (xy 139.171153 74.550499) (xy 139.171156 74.5505) (xy 139.171158 74.5505) - (xy 139.328844 74.5505) (xy 139.328845 74.550499) (xy 139.483497 74.519737) (xy 139.596166 74.473067) - (xy 139.629172 74.459397) (xy 139.629172 74.459396) (xy 139.629179 74.459394) (xy 139.760289 74.371789) - (xy 139.871789 74.260289) (xy 139.959394 74.129179) (xy 140.019737 73.983497) (xy 140.040943 73.876888) - (xy 147.743765 73.876888) (xy 147.743765 74.034581) (xy 147.774526 74.189224) (xy 147.774529 74.189236) - (xy 147.834867 74.334907) (xy 147.834874 74.33492) (xy 147.922475 74.466023) (xy 147.922478 74.466027) - (xy 148.033972 74.577521) (xy 148.033976 74.577524) (xy 148.165079 74.665125) (xy 148.165092 74.665132) - (xy 148.316396 74.727803) (xy 148.315737 74.729392) (xy 148.367319 74.763184) (xy 148.395787 74.826991) - (xy 148.387461 74.891014) (xy 148.374528 74.922237) (xy 148.374526 74.922245) (xy 148.343765 75.076888) - (xy 148.343765 75.234581) (xy 148.374526 75.389224) (xy 148.374529 75.389236) (xy 148.434867 75.534907) - (xy 148.434874 75.53492) (xy 148.522475 75.666023) (xy 148.522478 75.666027) (xy 148.633972 75.777521) - (xy 148.633976 75.777524) (xy 148.765079 75.865125) (xy 148.765092 75.865132) (xy 148.910763 75.92547) - (xy 148.910768 75.925472) (xy 149.065418 75.956234) (xy 149.065421 75.956235) (xy 149.065423 75.956235) - (xy 149.223109 75.956235) (xy 149.22311 75.956234) (xy 149.377762 75.925472) (xy 149.523444 75.865129) - (xy 149.654554 75.777524) (xy 149.766054 75.666024) (xy 149.783038 75.640606) (xy 149.789413 75.631066) - (xy 149.843025 75.58626) (xy 149.91235 75.577553) (xy 149.975377 75.607707) (xy 149.980196 75.612275) - (xy 149.989707 75.621786) (xy 149.989711 75.621789) (xy 150.120814 75.70939) (xy 150.120827 75.709397) - (xy 150.266498 75.769735) (xy 150.266503 75.769737) (xy 150.421153 75.800499) (xy 150.421156 75.8005) - (xy 150.421158 75.8005) (xy 150.578844 75.8005) (xy 150.578845 75.800499) (xy 150.733497 75.769737) - (xy 150.879179 75.709394) (xy 151.010289 75.621789) (xy 151.121789 75.510289) (xy 151.209394 75.379179) - (xy 151.269737 75.233497) (xy 151.3005 75.078842) (xy 151.3005 74.921158) (xy 151.3005 74.921155) - (xy 151.300499 74.921153) (xy 151.281769 74.826991) (xy 151.269737 74.766503) (xy 151.264249 74.753254) - (xy 151.209397 74.620827) (xy 151.20939 74.620814) (xy 151.121789 74.489711) (xy 151.121786 74.489707) - (xy 151.010292 74.378213) (xy 151.010288 74.37821) (xy 150.879185 74.290609) (xy 150.879172 74.290602) - (xy 150.733501 74.230264) (xy 150.733489 74.230261) (xy 150.578845 74.1995) (xy 150.578842 74.1995) - (xy 150.421158 74.1995) (xy 150.421155 74.1995) (xy 150.26651 74.230261) (xy 150.266498 74.230264) - (xy 150.120827 74.290602) (xy 150.120814 74.290609) (xy 149.989711 74.37821) (xy 149.989707 74.378213) - (xy 149.878213 74.489707) (xy 149.878208 74.489713) (xy 149.85485 74.524671) (xy 149.801237 74.569476) - (xy 149.731912 74.578182) (xy 149.668885 74.548026) (xy 149.664065 74.543457) (xy 149.654556 74.533947) - (xy 149.654553 74.533945) (xy 149.52345 74.446344) (xy 149.523437 74.446337) (xy 149.372135 74.383667) - (xy 149.37279 74.382084) (xy 149.321184 74.348254) (xy 149.292737 74.284437) (xy 149.301069 74.220454) - (xy 149.314002 74.189232) (xy 149.344765 74.034577) (xy 149.344765 73.876893) (xy 149.344765 73.87689) - (xy 149.344764 73.876888) (xy 149.335207 73.828842) (xy 149.314002 73.722238) (xy 149.290914 73.666498) - (xy 149.253662 73.576562) (xy 149.253655 73.576549) (xy 149.166054 73.445446) (xy 149.166051 73.445442) - (xy 149.054557 73.333948) (xy 149.054553 73.333945) (xy 148.92345 73.246344) (xy 148.923437 73.246337) - (xy 148.777766 73.185999) (xy 148.777754 73.185996) (xy 148.62311 73.155235) (xy 148.623107 73.155235) - (xy 148.465423 73.155235) (xy 148.46542 73.155235) (xy 148.310775 73.185996) (xy 148.310763 73.185999) - (xy 148.165092 73.246337) (xy 148.165079 73.246344) (xy 148.033976 73.333945) (xy 148.033972 73.333948) - (xy 147.922478 73.445442) (xy 147.922475 73.445446) (xy 147.834874 73.576549) (xy 147.834867 73.576562) - (xy 147.774529 73.722233) (xy 147.774526 73.722245) (xy 147.743765 73.876888) (xy 140.040943 73.876888) - (xy 140.0505 73.828842) (xy 140.0505 73.671158) (xy 140.0505 73.671155) (xy 140.050499 73.671153) - (xy 140.049573 73.666498) (xy 140.019737 73.516503) (xy 140.019735 73.516498) (xy 139.959397 73.370827) - (xy 139.95939 73.370814) (xy 139.871789 73.239711) (xy 139.871786 73.239707) (xy 139.760292 73.128213) - (xy 139.760288 73.12821) (xy 139.629185 73.040609) (xy 139.629172 73.040602) (xy 139.483501 72.980264) - (xy 139.483489 72.980261) (xy 139.328845 72.9495) (xy 139.328842 72.9495) (xy 139.171158 72.9495) - (xy 139.171155 72.9495) (xy 139.01651 72.980261) (xy 139.016498 72.980264) (xy 138.870827 73.040602) - (xy 138.870814 73.040609) (xy 138.739711 73.12821) (xy 138.739707 73.128213) (xy 138.628213 73.239707) - (xy 138.62821 73.239711) (xy 138.540609 73.370814) (xy 138.540602 73.370827) (xy 138.480264 73.516498) - (xy 138.480261 73.51651) (xy 138.4495 73.671153) (xy 132.020662 73.671153) (xy 132.019738 73.666507) - (xy 132.019735 73.666498) (xy 131.959397 73.520827) (xy 131.95939 73.520814) (xy 131.871789 73.389711) - (xy 131.871786 73.389707) (xy 131.760292 73.278213) (xy 131.760288 73.27821) (xy 131.629185 73.190609) - (xy 131.629172 73.190602) (xy 131.483501 73.130264) (xy 131.483489 73.130261) (xy 131.328845 73.0995) - (xy 131.328842 73.0995) (xy 131.171158 73.0995) (xy 131.171155 73.0995) (xy 131.01651 73.130261) - (xy 131.016498 73.130264) (xy 130.870827 73.190602) (xy 130.870814 73.190609) (xy 130.739711 73.27821) - (xy 130.739707 73.278213) (xy 130.628213 73.389707) (xy 130.62821 73.389711) (xy 130.540609 73.520814) - (xy 130.540602 73.520827) (xy 130.480264 73.666498) (xy 130.480261 73.66651) (xy 130.4495 73.821153) - (xy 120.2505 73.821153) (xy 120.2505 71.021153) (xy 123.0995 71.021153) (xy 123.0995 71.178846) - (xy 123.130261 71.333489) (xy 123.130264 71.333501) (xy 123.190602 71.479172) (xy 123.190609 71.479185) - (xy 123.27821 71.610288) (xy 123.278213 71.610292) (xy 123.389707 71.721786) (xy 123.389711 71.721789) - (xy 123.520814 71.80939) (xy 123.520827 71.809397) (xy 123.666498 71.869735) (xy 123.666503 71.869737) - (xy 123.821153 71.900499) (xy 123.821156 71.9005) (xy 123.821158 71.9005) (xy 123.978844 71.9005) - (xy 123.978845 71.900499) (xy 124.133497 71.869737) (xy 124.279179 71.809394) (xy 124.390811 71.734803) - (xy 124.457485 71.713927) (xy 124.524865 71.732411) (xy 124.571555 71.784389) (xy 124.581316 71.813715) - (xy 124.605141 71.93349) (xy 124.605144 71.9335) (xy 124.665482 72.079171) (xy 124.665489 72.079184) - (xy 124.75309 72.210287) (xy 124.753093 72.210291) (xy 124.864587 72.321785) (xy 124.864591 72.321788) - (xy 124.995694 72.409389) (xy 124.995707 72.409396) (xy 125.141378 72.469734) (xy 125.141383 72.469736) - (xy 125.296033 72.500498) (xy 125.296036 72.500499) (xy 125.296038 72.500499) (xy 125.453724 72.500499) - (xy 125.453725 72.500498) (xy 125.608377 72.469736) (xy 125.754059 72.409393) (xy 125.885169 72.321788) - (xy 125.996669 72.210288) (xy 126.084274 72.079178) (xy 126.144617 71.933496) (xy 126.17538 71.778841) - (xy 126.17538 71.621157) (xy 126.17538 71.621154) (xy 126.175379 71.621152) (xy 126.163432 71.56109) - (xy 126.144617 71.466502) (xy 126.108308 71.378844) (xy 126.084277 71.320826) (xy 126.084273 71.320819) - (xy 126.07463 71.306387) (xy 126.017679 71.221153) (xy 126.6995 71.221153) (xy 126.6995 71.378846) - (xy 126.730261 71.533489) (xy 126.730264 71.533501) (xy 126.790602 71.679172) (xy 126.790609 71.679185) - (xy 126.87821 71.810288) (xy 126.878213 71.810292) (xy 126.989707 71.921786) (xy 126.989711 71.921789) - (xy 127.120814 72.00939) (xy 127.120827 72.009397) (xy 127.266498 72.069735) (xy 127.266503 72.069737) - (xy 127.421153 72.100499) (xy 127.421156 72.1005) (xy 127.421158 72.1005) (xy 127.578844 72.1005) - (xy 127.578845 72.100499) (xy 127.733497 72.069737) (xy 127.879179 72.009394) (xy 128.010289 71.921789) - (xy 128.121789 71.810289) (xy 128.147939 71.771153) (xy 132.4495 71.771153) (xy 132.4495 71.928846) - (xy 132.480261 72.083489) (xy 132.480264 72.083501) (xy 132.540602 72.229172) (xy 132.540609 72.229185) - (xy 132.62821 72.360288) (xy 132.628213 72.360292) (xy 132.739707 72.471786) (xy 132.739711 72.471789) - (xy 132.870814 72.55939) (xy 132.870827 72.559397) (xy 133.016498 72.619735) (xy 133.016503 72.619737) - (xy 133.171153 72.650499) (xy 133.171156 72.6505) (xy 133.171158 72.6505) (xy 133.328844 72.6505) - (xy 133.328845 72.650499) (xy 133.483497 72.619737) (xy 133.629179 72.559394) (xy 133.760289 72.471789) - (xy 133.871789 72.360289) (xy 133.959394 72.229179) (xy 134.019737 72.083497) (xy 134.0505 71.928842) - (xy 134.0505 71.771158) (xy 134.0505 71.771155) (xy 134.050499 71.771153) (xy 134.035585 71.696175) - (xy 134.019737 71.616503) (xy 134.017163 71.610288) (xy 133.959397 71.470827) (xy 133.95939 71.470814) - (xy 133.871789 71.339711) (xy 133.871786 71.339707) (xy 133.760292 71.228213) (xy 133.760288 71.22821) - (xy 133.629185 71.140609) (xy 133.629172 71.140602) (xy 133.483501 71.080264) (xy 133.483489 71.080261) - (xy 133.328845 71.0495) (xy 133.328842 71.0495) (xy 133.171158 71.0495) (xy 133.171155 71.0495) - (xy 133.01651 71.080261) (xy 133.016498 71.080264) (xy 132.870827 71.140602) (xy 132.870814 71.140609) - (xy 132.739711 71.22821) (xy 132.739707 71.228213) (xy 132.628213 71.339707) (xy 132.62821 71.339711) - (xy 132.540609 71.470814) (xy 132.540602 71.470827) (xy 132.480264 71.616498) (xy 132.480261 71.61651) - (xy 132.4495 71.771153) (xy 128.147939 71.771153) (xy 128.172226 71.734805) (xy 128.198038 71.696175) - (xy 128.198038 71.696174) (xy 128.209394 71.679179) (xy 128.269737 71.533497) (xy 128.3005 71.378842) - (xy 128.3005 71.221158) (xy 128.3005 71.221155) (xy 128.300499 71.221153) (xy 128.300427 71.220793) - (xy 128.269737 71.066503) (xy 128.259859 71.042656) (xy 128.209397 70.920827) (xy 128.20939 70.920814) - (xy 128.121789 70.789711) (xy 128.121786 70.789707) (xy 128.010292 70.678213) (xy 128.010288 70.67821) - (xy 127.879185 70.590609) (xy 127.879172 70.590602) (xy 127.733501 70.530264) (xy 127.733489 70.530261) - (xy 127.578845 70.4995) (xy 127.578842 70.4995) (xy 127.421158 70.4995) (xy 127.421155 70.4995) - (xy 127.26651 70.530261) (xy 127.266498 70.530264) (xy 127.120827 70.590602) (xy 127.120814 70.590609) - (xy 126.989711 70.67821) (xy 126.989707 70.678213) (xy 126.878213 70.789707) (xy 126.87821 70.789711) - (xy 126.790609 70.920814) (xy 126.790602 70.920827) (xy 126.730264 71.066498) (xy 126.730261 71.06651) - (xy 126.6995 71.221153) (xy 126.017679 71.221153) (xy 125.996669 71.189709) (xy 125.885172 71.078212) - (xy 125.885168 71.078209) (xy 125.754065 70.990608) (xy 125.754052 70.990601) (xy 125.608381 70.930263) - (xy 125.608369 70.93026) (xy 125.453725 70.899499) (xy 125.453722 70.899499) (xy 125.296038 70.899499) - (xy 125.296035 70.899499) (xy 125.14139 70.93026) (xy 125.141378 70.930263) (xy 124.995707 70.990601) - (xy 124.995694 70.990608) (xy 124.884071 71.065193) (xy 124.817393 71.086071) (xy 124.750013 71.067586) - (xy 124.703323 71.015607) (xy 124.693563 70.986282) (xy 124.675512 70.895538) (xy 124.669737 70.866503) - (xy 124.637929 70.789711) (xy 124.609397 70.720827) (xy 124.60939 70.720814) (xy 124.521789 70.589711) - (xy 124.521786 70.589707) (xy 124.410292 70.478213) (xy 124.410288 70.47821) (xy 124.279185 70.390609) - (xy 124.279172 70.390602) (xy 124.133501 70.330264) (xy 124.133489 70.330261) (xy 123.978845 70.2995) - (xy 123.978842 70.2995) (xy 123.821158 70.2995) (xy 123.821155 70.2995) (xy 123.66651 70.330261) - (xy 123.666498 70.330264) (xy 123.520827 70.390602) (xy 123.520814 70.390609) (xy 123.389711 70.47821) - (xy 123.389707 70.478213) (xy 123.278213 70.589707) (xy 123.27821 70.589711) (xy 123.190609 70.720814) - (xy 123.190602 70.720827) (xy 123.130264 70.866498) (xy 123.130261 70.86651) (xy 123.0995 71.021153) - (xy 120.2505 71.021153) (xy 120.2505 70.021153) (xy 143.9995 70.021153) (xy 143.9995 70.178846) - (xy 144.030261 70.333489) (xy 144.030264 70.333501) (xy 144.090602 70.479172) (xy 144.090609 70.479185) - (xy 144.17821 70.610288) (xy 144.178213 70.610292) (xy 144.289707 70.721786) (xy 144.289711 70.721789) - (xy 144.420814 70.80939) (xy 144.420827 70.809397) (xy 144.522952 70.851698) (xy 144.577356 70.895538) - (xy 144.599421 70.961833) (xy 144.5995 70.966259) (xy 144.5995 71.028846) (xy 144.630261 71.183489) - (xy 144.630264 71.183501) (xy 144.690602 71.329172) (xy 144.690609 71.329185) (xy 144.77821 71.460288) - (xy 144.778213 71.460292) (xy 144.889707 71.571786) (xy 144.889711 71.571789) (xy 145.020814 71.65939) - (xy 145.020827 71.659397) (xy 145.152476 71.713927) (xy 145.166503 71.719737) (xy 145.321153 71.750499) - (xy 145.321156 71.7505) (xy 145.321158 71.7505) (xy 145.478844 71.7505) (xy 145.478845 71.750499) - (xy 145.633497 71.719737) (xy 145.779179 71.659394) (xy 145.910289 71.571789) (xy 146.021789 71.460289) - (xy 146.109394 71.329179) (xy 146.169737 71.183497) (xy 146.2005 71.028842) (xy 146.2005 70.871158) - (xy 146.2005 70.871155) (xy 146.200499 70.871153) (xy 146.194073 70.838848) (xy 146.169737 70.716503) - (xy 146.127438 70.614383) (xy 146.109397 70.570827) (xy 146.10939 70.570814) (xy 146.021789 70.439711) - (xy 146.021786 70.439707) (xy 145.910292 70.328213) (xy 145.910288 70.32821) (xy 145.779185 70.240609) - (xy 145.779175 70.240604) (xy 145.677047 70.198301) (xy 145.667602 70.19069) (xy 145.656013 70.187111) - (xy 145.640904 70.169175) (xy 145.622644 70.15446) (xy 145.617697 70.141625) (xy 145.610999 70.133674) - (xy 145.606637 70.112931) (xy 145.601528 70.099674) (xy 145.6005 70.09174) (xy 145.6005 70.021158) - (xy 145.571236 69.874038) (xy 149.9995 69.874038) (xy 149.9995 70.125962) (xy 150.026986 70.2995) - (xy 150.03891 70.374785) (xy 150.11676 70.614383) (xy 150.231132 70.838848) (xy 150.379201 71.042649) - (xy 150.379205 71.042654) (xy 150.557345 71.220794) (xy 150.55735 71.220798) (xy 150.695028 71.320826) - (xy 150.761155 71.36887) (xy 150.904184 71.441747) (xy 150.985616 71.483239) (xy 150.985618 71.483239) - (xy 150.985621 71.483241) (xy 151.225215 71.56109) (xy 151.474038 71.6005) (xy 151.474039 71.6005) - (xy 151.725961 71.6005) (xy 151.725962 71.6005) (xy 151.974785 71.56109) (xy 152.214379 71.483241) - (xy 152.438845 71.36887) (xy 152.642656 71.220793) (xy 152.820793 71.042656) (xy 152.96887 70.838845) - (xy 153.083241 70.614379) (xy 153.16109 70.374785) (xy 153.2005 70.125962) (xy 153.2005 69.874038) - (xy 153.16109 69.625215) (xy 153.083241 69.385621) (xy 153.083239 69.385618) (xy 153.083239 69.385616) - (xy 153.03936 69.2995) (xy 152.96887 69.161155) (xy 152.949952 69.135117) (xy 152.820798 68.95735) - (xy 152.820794 68.957345) (xy 152.642654 68.779205) (xy 152.642649 68.779201) (xy 152.438848 68.631132) - (xy 152.438847 68.631131) (xy 152.438845 68.63113) (xy 152.368747 68.595413) (xy 152.214383 68.51676) - (xy 151.974785 68.43891) (xy 151.866669 68.421786) (xy 151.725962 68.3995) (xy 151.474038 68.3995) - (xy 151.349626 68.419205) (xy 151.225214 68.43891) (xy 150.985616 68.51676) (xy 150.761151 68.631132) - (xy 150.55735 68.779201) (xy 150.557345 68.779205) (xy 150.379205 68.957345) (xy 150.379201 68.95735) - (xy 150.231132 69.161151) (xy 150.11676 69.385616) (xy 150.050447 69.589707) (xy 150.03891 69.625215) - (xy 149.9995 69.874038) (xy 145.571236 69.874038) (xy 145.569737 69.866503) (xy 145.569735 69.866498) - (xy 145.509397 69.720827) (xy 145.50939 69.720814) (xy 145.421789 69.589711) (xy 145.421786 69.589707) - (xy 145.310292 69.478213) (xy 145.310288 69.47821) (xy 145.179185 69.390609) (xy 145.179172 69.390602) - (xy 145.033501 69.330264) (xy 145.033489 69.330261) (xy 144.878845 69.2995) (xy 144.878842 69.2995) - (xy 144.721158 69.2995) (xy 144.721155 69.2995) (xy 144.56651 69.330261) (xy 144.566498 69.330264) - (xy 144.420827 69.390602) (xy 144.420814 69.390609) (xy 144.289711 69.47821) (xy 144.289707 69.478213) - (xy 144.178213 69.589707) (xy 144.17821 69.589711) (xy 144.090609 69.720814) (xy 144.090602 69.720827) - (xy 144.030264 69.866498) (xy 144.030261 69.86651) (xy 143.9995 70.021153) (xy 120.2505 70.021153) - (xy 120.2505 66.921153) (xy 120.6995 66.921153) (xy 120.6995 67.078846) (xy 120.730261 67.233489) - (xy 120.730264 67.233501) (xy 120.790602 67.379172) (xy 120.790609 67.379185) (xy 120.87821 67.510288) - (xy 120.878213 67.510292) (xy 120.989707 67.621786) (xy 120.989711 67.621789) (xy 121.120814 67.70939) - (xy 121.120827 67.709397) (xy 121.266498 67.769735) (xy 121.266503 67.769737) (xy 121.421153 67.800499) - (xy 121.421156 67.8005) (xy 121.421158 67.8005) (xy 121.578844 67.8005) (xy 121.578845 67.800499) - (xy 121.733497 67.769737) (xy 121.85079 67.721153) (xy 129.9995 67.721153) (xy 129.9995 67.878846) - (xy 130.030261 68.033489) (xy 130.030264 68.033501) (xy 130.090602 68.179172) (xy 130.090609 68.179185) - (xy 130.17821 68.310288) (xy 130.178213 68.310292) (xy 130.289707 68.421786) (xy 130.289711 68.421789) - (xy 130.420814 68.50939) (xy 130.420827 68.509397) (xy 130.566498 68.569735) (xy 130.566503 68.569737) - (xy 130.721153 68.600499) (xy 130.721156 68.6005) (xy 130.721158 68.6005) (xy 130.878844 68.6005) - (xy 130.878845 68.600499) (xy 131.033497 68.569737) (xy 131.179179 68.509394) (xy 131.310289 68.421789) - (xy 131.421789 68.310289) (xy 131.509394 68.179179) (xy 131.569737 68.033497) (xy 131.6005 67.878842) - (xy 131.6005 67.721158) (xy 131.6005 67.721155) (xy 131.600499 67.721153) (xy 131.580734 67.621788) - (xy 131.569737 67.566503) (xy 131.546452 67.510288) (xy 131.509397 67.420827) (xy 131.50939 67.420814) - (xy 131.421789 67.289711) (xy 131.421786 67.289707) (xy 131.310292 67.178213) (xy 131.310288 67.17821) - (xy 131.179185 67.090609) (xy 131.179172 67.090602) (xy 131.033501 67.030264) (xy 131.033489 67.030261) - (xy 130.878845 66.9995) (xy 130.878842 66.9995) (xy 130.721158 66.9995) (xy 130.721155 66.9995) - (xy 130.56651 67.030261) (xy 130.566498 67.030264) (xy 130.420827 67.090602) (xy 130.420814 67.090609) - (xy 130.289711 67.17821) (xy 130.289707 67.178213) (xy 130.178213 67.289707) (xy 130.17821 67.289711) - (xy 130.090609 67.420814) (xy 130.090602 67.420827) (xy 130.030264 67.566498) (xy 130.030261 67.56651) - (xy 129.9995 67.721153) (xy 121.85079 67.721153) (xy 121.879179 67.709394) (xy 122.010289 67.621789) - (xy 122.121789 67.510289) (xy 122.209394 67.379179) (xy 122.269737 67.233497) (xy 122.3005 67.078842) - (xy 122.3005 66.921158) (xy 122.3005 66.921155) (xy 122.300499 66.921153) (xy 122.269738 66.76651) - (xy 122.269737 66.766503) (xy 122.269735 66.766498) (xy 122.209397 66.620827) (xy 122.20939 66.620814) - (xy 122.121789 66.489711) (xy 122.121786 66.489707) (xy 122.010292 66.378213) (xy 122.010288 66.37821) - (xy 121.879185 66.290609) (xy 121.879172 66.290602) (xy 121.733501 66.230264) (xy 121.733489 66.230261) - (xy 121.578845 66.1995) (xy 121.578842 66.1995) (xy 121.421158 66.1995) (xy 121.421155 66.1995) - (xy 121.26651 66.230261) (xy 121.266498 66.230264) (xy 121.120827 66.290602) (xy 121.120814 66.290609) - (xy 120.989711 66.37821) (xy 120.989707 66.378213) (xy 120.878213 66.489707) (xy 120.87821 66.489711) - (xy 120.790609 66.620814) (xy 120.790602 66.620827) (xy 120.730264 66.766498) (xy 120.730261 66.76651) - (xy 120.6995 66.921153) (xy 120.2505 66.921153) (xy 120.2505 65.021153) (xy 144.4495 65.021153) - (xy 144.4495 65.178846) (xy 144.480261 65.333489) (xy 144.480264 65.333501) (xy 144.540602 65.479172) - (xy 144.540609 65.479185) (xy 144.62821 65.610288) (xy 144.628213 65.610292) (xy 144.739707 65.721786) - (xy 144.739711 65.721789) (xy 144.870814 65.80939) (xy 144.870827 65.809397) (xy 145.016498 65.869735) - (xy 145.016503 65.869737) (xy 145.171153 65.900499) (xy 145.171156 65.9005) (xy 145.171158 65.9005) - (xy 145.328844 65.9005) (xy 145.328845 65.900499) (xy 145.483497 65.869737) (xy 145.629179 65.809394) - (xy 145.760289 65.721789) (xy 145.871789 65.610289) (xy 145.959394 65.479179) (xy 146.019737 65.333497) - (xy 146.0505 65.178842) (xy 146.0505 65.021158) (xy 146.0505 65.021155) (xy 146.050499 65.021153) - (xy 146.019738 64.86651) (xy 146.019737 64.866503) (xy 146.019735 64.866498) (xy 145.959397 64.720827) - (xy 145.95939 64.720814) (xy 145.871789 64.589711) (xy 145.871786 64.589707) (xy 145.760292 64.478213) - (xy 145.760288 64.47821) (xy 145.629185 64.390609) (xy 145.629172 64.390602) (xy 145.483501 64.330264) - (xy 145.483489 64.330261) (xy 145.328845 64.2995) (xy 145.328842 64.2995) (xy 145.171158 64.2995) - (xy 145.171155 64.2995) (xy 145.01651 64.330261) (xy 145.016498 64.330264) (xy 144.870827 64.390602) - (xy 144.870814 64.390609) (xy 144.739711 64.47821) (xy 144.739707 64.478213) (xy 144.628213 64.589707) - (xy 144.62821 64.589711) (xy 144.540609 64.720814) (xy 144.540602 64.720827) (xy 144.480264 64.866498) - (xy 144.480261 64.86651) (xy 144.4495 65.021153) (xy 120.2505 65.021153) (xy 120.2505 62.921153) - (xy 121.1995 62.921153) (xy 121.1995 63.078846) (xy 121.230261 63.233489) (xy 121.230264 63.233501) - (xy 121.290602 63.379172) (xy 121.290609 63.379185) (xy 121.37821 63.510288) (xy 121.378213 63.510292) - (xy 121.489707 63.621786) (xy 121.489711 63.621789) (xy 121.620814 63.70939) (xy 121.620827 63.709397) - (xy 121.766498 63.769735) (xy 121.766503 63.769737) (xy 121.921153 63.800499) (xy 121.921156 63.8005) - (xy 121.921158 63.8005) (xy 122.078844 63.8005) (xy 122.078845 63.800499) (xy 122.233497 63.769737) - (xy 122.346166 63.723067) (xy 122.379172 63.709397) (xy 122.379172 63.709396) (xy 122.379179 63.709394) - (xy 122.510289 63.621789) (xy 122.621789 63.510289) (xy 122.709394 63.379179) (xy 122.712854 63.370827) - (xy 122.767163 63.239711) (xy 122.769737 63.233497) (xy 122.8005 63.078842) (xy 122.8005 62.921158) - (xy 122.8005 62.921155) (xy 122.800499 62.921153) (xy 122.787391 62.855255) (xy 122.769737 62.766503) - (xy 122.73142 62.673996) (xy 122.709397 62.620827) (xy 122.709392 62.620818) (xy 122.707304 62.617693) - (xy 122.706712 62.615804) (xy 122.706521 62.615446) (xy 122.706589 62.615409) (xy 122.686425 62.551016) - (xy 122.704908 62.483636) (xy 122.756886 62.436944) (xy 122.786213 62.427183) (xy 122.804328 62.42358) - (xy 122.931811 62.370775) (xy 123.046542 62.294114) (xy 123.144114 62.196542) (xy 123.220775 62.081811) - (xy 123.27358 61.954328) (xy 123.285817 61.892809) (xy 123.3005 61.818995) (xy 126.149499 61.818995) - (xy 126.176418 61.954322) (xy 126.176421 61.954332) (xy 126.229221 62.081804) (xy 126.229228 62.081817) - (xy 126.305885 62.196541) (xy 126.305888 62.196545) (xy 126.403454 62.294111) (xy 126.403458 62.294114) - (xy 126.518182 62.370771) (xy 126.518195 62.370778) (xy 126.645667 62.423578) (xy 126.645672 62.42358) - (xy 126.645676 62.42358) (xy 126.645677 62.423581) (xy 126.781004 62.4505) (xy 126.781007 62.4505) - (xy 126.918995 62.4505) (xy 127.010041 62.432389) (xy 127.054328 62.42358) (xy 127.181811 62.370775) - (xy 127.296542 62.294114) (xy 127.394114 62.196542) (xy 127.470775 62.081811) (xy 127.52358 61.954328) - (xy 127.535817 61.892809) (xy 127.5505 61.818995) (xy 127.5505 61.681004) (xy 127.523581 61.545677) - (xy 127.52358 61.545676) (xy 127.52358 61.545672) (xy 127.523578 61.545667) (xy 127.470778 61.418195) - (xy 127.470771 61.418182) (xy 127.394114 61.303458) (xy 127.394111 61.303454) (xy 127.296545 61.205888) - (xy 127.296541 61.205885) (xy 127.181817 61.129228) (xy 127.181804 61.129221) (xy 127.054332 61.076421) - (xy 127.054322 61.076418) (xy 126.918995 61.0495) (xy 126.918993 61.0495) (xy 126.781007 61.0495) - (xy 126.781005 61.0495) (xy 126.645677 61.076418) (xy 126.645667 61.076421) (xy 126.518195 61.129221) - (xy 126.518182 61.129228) (xy 126.403458 61.205885) (xy 126.403454 61.205888) (xy 126.305888 61.303454) - (xy 126.305885 61.303458) (xy 126.229228 61.418182) (xy 126.229221 61.418195) (xy 126.176421 61.545667) - (xy 126.176418 61.545677) (xy 126.1495 61.681004) (xy 126.1495 61.681007) (xy 126.1495 61.818993) - (xy 126.1495 61.818995) (xy 126.149499 61.818995) (xy 123.3005 61.818995) (xy 123.3005 61.681004) - (xy 123.273581 61.545677) (xy 123.27358 61.545676) (xy 123.27358 61.545672) (xy 123.273578 61.545667) - (xy 123.220778 61.418195) (xy 123.220771 61.418182) (xy 123.144114 61.303458) (xy 123.144111 61.303454) - (xy 123.046545 61.205888) (xy 123.046541 61.205885) (xy 122.931817 61.129228) (xy 122.931804 61.129221) - (xy 122.804332 61.076421) (xy 122.804322 61.076418) (xy 122.668995 61.0495) (xy 122.668993 61.0495) - (xy 122.531007 61.0495) (xy 122.531005 61.0495) (xy 122.395677 61.076418) (xy 122.395667 61.076421) - (xy 122.268195 61.129221) (xy 122.268182 61.129228) (xy 122.153458 61.205885) (xy 122.153454 61.205888) - (xy 122.055888 61.303454) (xy 122.055885 61.303458) (xy 121.979228 61.418182) (xy 121.979221 61.418195) - (xy 121.926421 61.545667) (xy 121.926418 61.545677) (xy 121.8995 61.681004) (xy 121.8995 61.681007) - (xy 121.8995 61.818993) (xy 121.8995 61.818995) (xy 121.899499 61.818995) (xy 121.926418 61.954322) - (xy 121.92642 61.954328) (xy 121.962021 62.040276) (xy 121.96949 62.109746) (xy 121.938215 62.172225) - (xy 121.878126 62.207877) (xy 121.871653 62.209346) (xy 121.766507 62.230262) (xy 121.766498 62.230264) - (xy 121.620827 62.290602) (xy 121.620814 62.290609) (xy 121.489711 62.37821) (xy 121.489707 62.378213) - (xy 121.378213 62.489707) (xy 121.37821 62.489711) (xy 121.290609 62.620814) (xy 121.290602 62.620827) - (xy 121.230264 62.766498) (xy 121.230261 62.76651) (xy 121.1995 62.921153) (xy 120.2505 62.921153) - (xy 120.2505 60.3745) (xy 120.270185 60.307461) (xy 120.322989 60.261706) (xy 120.3745 60.2505) - (xy 128.876 60.2505) + (xy 128.770662 76.271153) (xy 128.769738 76.266507) (xy 128.769735 76.266498) (xy 128.709396 76.120825) + (xy 128.709394 76.120822) (xy 128.709394 76.120821) (xy 128.674694 76.068889) (xy 128.653816 76.002215) + (xy 128.6723 75.934835) (xy 128.674676 75.931136) (xy 128.709394 75.879179) (xy 128.769737 75.733497) + (xy 128.8005 75.578842) (xy 128.8005 75.521153) (xy 137.9995 75.521153) (xy 137.9995 75.678846) + (xy 138.030261 75.833489) (xy 138.030264 75.833501) (xy 138.090602 75.979172) (xy 138.090609 75.979185) + (xy 138.17821 76.110288) (xy 138.178213 76.110292) (xy 138.289707 76.221786) (xy 138.289711 76.221789) + (xy 138.420814 76.30939) (xy 138.420827 76.309397) (xy 138.566498 76.369735) (xy 138.566503 76.369737) + (xy 138.716131 76.3995) (xy 138.721153 76.400499) (xy 138.721156 76.4005) (xy 138.721158 76.4005) + (xy 138.878844 76.4005) (xy 138.878845 76.400499) (xy 139.033497 76.369737) (xy 139.179179 76.309394) + (xy 139.310289 76.221789) (xy 139.421789 76.110289) (xy 139.509394 75.979179) (xy 139.512854 75.970827) + (xy 139.529305 75.931109) (xy 139.569737 75.833497) (xy 139.6005 75.678842) (xy 139.6005 75.521158) + (xy 139.6005 75.521155) (xy 139.600499 75.521153) (xy 139.5957 75.497029) (xy 139.569737 75.366503) + (xy 139.515092 75.234577) (xy 139.509397 75.220827) (xy 139.50939 75.220814) (xy 139.421789 75.089711) + (xy 139.421786 75.089707) (xy 139.310292 74.978213) (xy 139.310288 74.97821) (xy 139.179185 74.890609) + (xy 139.179172 74.890602) (xy 139.033501 74.830264) (xy 139.033489 74.830261) (xy 138.878845 74.7995) + (xy 138.878842 74.7995) (xy 138.721158 74.7995) (xy 138.721155 74.7995) (xy 138.56651 74.830261) + (xy 138.566498 74.830264) (xy 138.420827 74.890602) (xy 138.420814 74.890609) (xy 138.289711 74.97821) + (xy 138.289707 74.978213) (xy 138.178213 75.089707) (xy 138.17821 75.089711) (xy 138.090609 75.220814) + (xy 138.090602 75.220827) (xy 138.030264 75.366498) (xy 138.030261 75.36651) (xy 137.9995 75.521153) + (xy 128.8005 75.521153) (xy 128.8005 75.421158) (xy 128.8005 75.421155) (xy 128.800499 75.421153) + (xy 128.769738 75.26651) (xy 128.769737 75.266503) (xy 128.750812 75.220814) (xy 128.709397 75.120827) + (xy 128.70939 75.120814) (xy 128.621789 74.989711) (xy 128.621786 74.989707) (xy 128.510292 74.878213) + (xy 128.510288 74.87821) (xy 128.379185 74.790609) (xy 128.379173 74.790603) (xy 128.359771 74.782566) + (xy 128.305368 74.738724) (xy 128.283305 74.672429) (xy 128.300585 74.60473) (xy 128.304106 74.599143) + (xy 128.333659 74.554914) (xy 128.394002 74.409232) (xy 128.424765 74.254577) (xy 128.424765 74.096893) + (xy 128.424765 74.09689) (xy 128.424764 74.096888) (xy 128.394003 73.942245) (xy 128.394002 73.942238) + (xy 128.367885 73.879185) (xy 128.360982 73.862518) (xy 128.343848 73.821153) (xy 130.4495 73.821153) + (xy 130.4495 73.978846) (xy 130.480261 74.133489) (xy 130.480264 74.133501) (xy 130.540602 74.279172) + (xy 130.540609 74.279185) (xy 130.62821 74.410288) (xy 130.628213 74.410292) (xy 130.739707 74.521786) + (xy 130.739711 74.521789) (xy 130.870814 74.60939) (xy 130.870827 74.609397) (xy 131.005378 74.665129) + (xy 131.016503 74.669737) (xy 131.171153 74.700499) (xy 131.171156 74.7005) (xy 131.171158 74.7005) + (xy 131.328844 74.7005) (xy 131.328845 74.700499) (xy 131.483497 74.669737) (xy 131.601592 74.620821) + (xy 131.629172 74.609397) (xy 131.629172 74.609396) (xy 131.629179 74.609394) (xy 131.760289 74.521789) + (xy 131.871789 74.410289) (xy 131.959394 74.279179) (xy 132.019737 74.133497) (xy 132.0505 73.978842) + (xy 132.0505 73.876888) (xy 147.743765 73.876888) (xy 147.743765 74.034581) (xy 147.774526 74.189224) + (xy 147.774529 74.189236) (xy 147.834867 74.334907) (xy 147.834874 74.33492) (xy 147.922475 74.466023) + (xy 147.922478 74.466027) (xy 148.033972 74.577521) (xy 148.033976 74.577524) (xy 148.165079 74.665125) + (xy 148.165092 74.665132) (xy 148.316396 74.727803) (xy 148.315737 74.729392) (xy 148.367319 74.763184) + (xy 148.395787 74.826991) (xy 148.387461 74.891014) (xy 148.374528 74.922237) (xy 148.374526 74.922245) + (xy 148.343765 75.076888) (xy 148.343765 75.234581) (xy 148.374526 75.389224) (xy 148.374529 75.389236) + (xy 148.434867 75.534907) (xy 148.434874 75.53492) (xy 148.522475 75.666023) (xy 148.522478 75.666027) + (xy 148.633972 75.777521) (xy 148.633976 75.777524) (xy 148.765079 75.865125) (xy 148.765092 75.865132) + (xy 148.910763 75.92547) (xy 148.910768 75.925472) (xy 149.065418 75.956234) (xy 149.065421 75.956235) + (xy 149.065423 75.956235) (xy 149.223109 75.956235) (xy 149.22311 75.956234) (xy 149.377762 75.925472) + (xy 149.523444 75.865129) (xy 149.654554 75.777524) (xy 149.766054 75.666024) (xy 149.783038 75.640606) + (xy 149.789413 75.631066) (xy 149.843025 75.58626) (xy 149.91235 75.577553) (xy 149.975377 75.607707) + (xy 149.980196 75.612275) (xy 149.989707 75.621786) (xy 149.989711 75.621789) (xy 150.120814 75.70939) + (xy 150.120827 75.709397) (xy 150.266498 75.769735) (xy 150.266503 75.769737) (xy 150.421153 75.800499) + (xy 150.421156 75.8005) (xy 150.421158 75.8005) (xy 150.578844 75.8005) (xy 150.578845 75.800499) + (xy 150.733497 75.769737) (xy 150.879179 75.709394) (xy 151.010289 75.621789) (xy 151.121789 75.510289) + (xy 151.209394 75.379179) (xy 151.269737 75.233497) (xy 151.3005 75.078842) (xy 151.3005 74.921158) + (xy 151.3005 74.921155) (xy 151.300499 74.921153) (xy 151.293333 74.885127) (xy 151.269737 74.766503) + (xy 151.242398 74.7005) (xy 151.209397 74.620827) (xy 151.20939 74.620814) (xy 151.121789 74.489711) + (xy 151.121786 74.489707) (xy 151.010292 74.378213) (xy 151.010288 74.37821) (xy 150.879185 74.290609) + (xy 150.879172 74.290602) (xy 150.733501 74.230264) (xy 150.733489 74.230261) (xy 150.578845 74.1995) + (xy 150.578842 74.1995) (xy 150.421158 74.1995) (xy 150.421155 74.1995) (xy 150.26651 74.230261) + (xy 150.266498 74.230264) (xy 150.120827 74.290602) (xy 150.120814 74.290609) (xy 149.989711 74.37821) + (xy 149.989707 74.378213) (xy 149.878213 74.489707) (xy 149.878208 74.489713) (xy 149.85485 74.524671) + (xy 149.801237 74.569476) (xy 149.731912 74.578182) (xy 149.668885 74.548026) (xy 149.664065 74.543457) + (xy 149.654556 74.533947) (xy 149.654553 74.533945) (xy 149.52345 74.446344) (xy 149.523437 74.446337) + (xy 149.372135 74.383667) (xy 149.37279 74.382084) (xy 149.321184 74.348254) (xy 149.292737 74.284437) + (xy 149.301069 74.220454) (xy 149.314002 74.189232) (xy 149.344765 74.034577) (xy 149.344765 73.876893) + (xy 149.344765 73.87689) (xy 149.344764 73.876888) (xy 149.341906 73.862518) (xy 149.314002 73.722238) + (xy 149.254606 73.578842) (xy 149.253662 73.576562) (xy 149.253655 73.576549) (xy 149.166054 73.445446) + (xy 149.166051 73.445442) (xy 149.054557 73.333948) (xy 149.054553 73.333945) (xy 148.92345 73.246344) + (xy 148.923437 73.246337) (xy 148.777766 73.185999) (xy 148.777754 73.185996) (xy 148.62311 73.155235) + (xy 148.623107 73.155235) (xy 148.465423 73.155235) (xy 148.46542 73.155235) (xy 148.310775 73.185996) + (xy 148.310763 73.185999) (xy 148.165092 73.246337) (xy 148.165079 73.246344) (xy 148.033976 73.333945) + (xy 148.033972 73.333948) (xy 147.922478 73.445442) (xy 147.922475 73.445446) (xy 147.834874 73.576549) + (xy 147.834867 73.576562) (xy 147.774529 73.722233) (xy 147.774526 73.722245) (xy 147.743765 73.876888) + (xy 132.0505 73.876888) (xy 132.0505 73.821158) (xy 132.0505 73.821155) (xy 132.050499 73.821153) + (xy 132.019737 73.666503) (xy 131.973115 73.553946) (xy 131.959397 73.520827) (xy 131.95939 73.520814) + (xy 131.871789 73.389711) (xy 131.871786 73.389707) (xy 131.760292 73.278213) (xy 131.760288 73.27821) + (xy 131.629185 73.190609) (xy 131.629172 73.190602) (xy 131.483501 73.130264) (xy 131.483489 73.130261) + (xy 131.328845 73.0995) (xy 131.328842 73.0995) (xy 131.171158 73.0995) (xy 131.171155 73.0995) + (xy 131.01651 73.130261) (xy 131.016498 73.130264) (xy 130.870827 73.190602) (xy 130.870814 73.190609) + (xy 130.739711 73.27821) (xy 130.739707 73.278213) (xy 130.628213 73.389707) (xy 130.62821 73.389711) + (xy 130.540609 73.520814) (xy 130.540602 73.520827) (xy 130.480264 73.666498) (xy 130.480261 73.66651) + (xy 130.4495 73.821153) (xy 128.343848 73.821153) (xy 128.33366 73.796558) (xy 128.333655 73.796549) + (xy 128.246054 73.665446) (xy 128.246051 73.665442) (xy 128.134557 73.553948) (xy 128.134553 73.553945) + (xy 128.00345 73.466344) (xy 128.003437 73.466337) (xy 127.857766 73.405999) (xy 127.857754 73.405996) + (xy 127.70311 73.375235) (xy 127.703107 73.375235) (xy 127.545423 73.375235) (xy 127.54542 73.375235) + (xy 127.390775 73.405996) (xy 127.390763 73.405999) (xy 127.245092 73.466337) (xy 127.245079 73.466344) + (xy 127.113976 73.553945) (xy 127.113972 73.553948) (xy 127.002478 73.665442) (xy 127.002475 73.665446) + (xy 126.914874 73.796549) (xy 126.914867 73.796562) (xy 126.854529 73.942233) (xy 126.854526 73.942245) + (xy 126.823765 74.096888) (xy 126.823765 74.254581) (xy 126.854526 74.409224) (xy 126.854529 74.409236) + (xy 126.914867 74.554907) (xy 126.914874 74.55492) (xy 127.002475 74.686023) (xy 127.002478 74.686027) + (xy 127.113972 74.797521) (xy 127.113976 74.797524) (xy 127.245079 74.885125) (xy 127.245081 74.885126) + (xy 127.245086 74.885129) (xy 127.264489 74.893166) (xy 127.318892 74.937003) (xy 127.340959 75.003297) + (xy 127.323682 75.070997) (xy 127.320141 75.076617) (xy 127.290608 75.120816) (xy 127.290602 75.120827) + (xy 127.230264 75.266498) (xy 127.230261 75.26651) (xy 127.1995 75.421153) (xy 127.1995 75.578846) + (xy 127.230261 75.733489) (xy 127.230264 75.733501) (xy 127.290602 75.879172) (xy 127.290609 75.879185) + (xy 127.325304 75.931109) (xy 127.346182 75.997786) (xy 127.327698 76.065167) (xy 127.325304 76.068891) + (xy 127.290609 76.120814) (xy 127.290604 76.120823) (xy 127.279954 76.146535) (xy 127.236111 76.200937) + (xy 127.169817 76.223) (xy 127.102118 76.205719) (xy 127.096503 76.202181) (xy 127.079185 76.190609) + (xy 127.079172 76.190602) (xy 126.933501 76.130264) (xy 126.933489 76.130261) (xy 126.778845 76.0995) + (xy 126.778842 76.0995) (xy 126.621158 76.0995) (xy 126.621155 76.0995) (xy 126.46651 76.130261) + (xy 126.466498 76.130264) (xy 126.320827 76.190602) (xy 126.320814 76.190609) (xy 126.189711 76.27821) + (xy 126.189707 76.278213) (xy 126.078213 76.389707) (xy 126.07821 76.389711) (xy 125.990609 76.520814) + (xy 125.990602 76.520827) (xy 125.930264 76.666498) (xy 125.930261 76.66651) (xy 125.8995 76.821153) + (xy 120.2505 76.821153) (xy 120.2505 73.421153) (xy 124.8995 73.421153) (xy 124.8995 73.578846) + (xy 124.930261 73.733489) (xy 124.930264 73.733501) (xy 124.990602 73.879172) (xy 124.990609 73.879185) + (xy 125.07821 74.010288) (xy 125.078213 74.010292) (xy 125.189707 74.121786) (xy 125.189711 74.121789) + (xy 125.320814 74.20939) (xy 125.320827 74.209397) (xy 125.466498 74.269735) (xy 125.466503 74.269737) + (xy 125.621153 74.300499) (xy 125.621156 74.3005) (xy 125.621158 74.3005) (xy 125.778844 74.3005) + (xy 125.778845 74.300499) (xy 125.933497 74.269737) (xy 126.079179 74.209394) (xy 126.210289 74.121789) + (xy 126.321789 74.010289) (xy 126.409394 73.879179) (xy 126.469737 73.733497) (xy 126.5005 73.578842) + (xy 126.5005 73.421158) (xy 126.5005 73.421155) (xy 126.500499 73.421153) (xy 126.472066 73.278211) + (xy 126.469737 73.266503) (xy 126.438298 73.190602) (xy 126.409397 73.120827) (xy 126.40939 73.120814) + (xy 126.321789 72.989711) (xy 126.321786 72.989707) (xy 126.210292 72.878213) (xy 126.210288 72.87821) + (xy 126.079185 72.790609) (xy 126.079172 72.790602) (xy 125.933501 72.730264) (xy 125.933489 72.730261) + (xy 125.778845 72.6995) (xy 125.778842 72.6995) (xy 125.621158 72.6995) (xy 125.621155 72.6995) + (xy 125.46651 72.730261) (xy 125.466498 72.730264) (xy 125.320827 72.790602) (xy 125.320814 72.790609) + (xy 125.189711 72.87821) (xy 125.189707 72.878213) (xy 125.078213 72.989707) (xy 125.07821 72.989711) + (xy 124.990609 73.120814) (xy 124.990602 73.120827) (xy 124.930264 73.266498) (xy 124.930261 73.26651) + (xy 124.8995 73.421153) (xy 120.2505 73.421153) (xy 120.2505 71.721153) (xy 139.8995 71.721153) + (xy 139.8995 71.878846) (xy 139.930261 72.033489) (xy 139.930264 72.033501) (xy 139.990602 72.179172) + (xy 139.990609 72.179185) (xy 140.07821 72.310288) (xy 140.078213 72.310292) (xy 140.189707 72.421786) + (xy 140.189711 72.421789) (xy 140.320814 72.50939) (xy 140.320827 72.509397) (xy 140.466498 72.569735) + (xy 140.466503 72.569737) (xy 140.621153 72.600499) (xy 140.621156 72.6005) (xy 140.621158 72.6005) + (xy 140.778844 72.6005) (xy 140.778845 72.600499) (xy 140.933497 72.569737) (xy 141.079179 72.509394) + (xy 141.210289 72.421789) (xy 141.321789 72.310289) (xy 141.409394 72.179179) (xy 141.469737 72.033497) + (xy 141.5005 71.878842) (xy 141.5005 71.721158) (xy 141.5005 71.721155) (xy 141.500499 71.721153) + (xy 141.478269 71.609397) (xy 141.469737 71.566503) (xy 141.451215 71.521786) (xy 141.409397 71.420827) + (xy 141.40939 71.420814) (xy 141.321789 71.289711) (xy 141.321786 71.289707) (xy 141.210292 71.178213) + (xy 141.210288 71.17821) (xy 141.079185 71.090609) (xy 141.079172 71.090602) (xy 140.933501 71.030264) + (xy 140.933489 71.030261) (xy 140.778845 70.9995) (xy 140.778842 70.9995) (xy 140.621158 70.9995) + (xy 140.621155 70.9995) (xy 140.46651 71.030261) (xy 140.466498 71.030264) (xy 140.320827 71.090602) + (xy 140.320814 71.090609) (xy 140.189711 71.17821) (xy 140.189707 71.178213) (xy 140.078213 71.289707) + (xy 140.07821 71.289711) (xy 139.990609 71.420814) (xy 139.990602 71.420827) (xy 139.930264 71.566498) + (xy 139.930261 71.56651) (xy 139.8995 71.721153) (xy 120.2505 71.721153) (xy 120.2505 69.074038) + (xy 121.6995 69.074038) (xy 121.6995 69.325962) (xy 121.73891 69.574785) (xy 121.81676 69.814383) + (xy 121.895413 69.968747) (xy 121.922115 70.021153) (xy 121.931132 70.038848) (xy 122.079201 70.242649) + (xy 122.079205 70.242654) (xy 122.257345 70.420794) (xy 122.25735 70.420798) (xy 122.380525 70.510289) + (xy 122.461155 70.56887) (xy 122.565009 70.621786) (xy 122.685616 70.683239) (xy 122.685618 70.683239) + (xy 122.685621 70.683241) (xy 122.925215 70.76109) (xy 123.174038 70.8005) (xy 123.174039 70.8005) + (xy 123.425961 70.8005) (xy 123.425962 70.8005) (xy 123.674785 70.76109) (xy 123.914379 70.683241) + (xy 124.138845 70.56887) (xy 124.342656 70.420793) (xy 124.520793 70.242656) (xy 124.66887 70.038845) + (xy 124.728837 69.921153) (xy 132.5495 69.921153) (xy 132.5495 70.078846) (xy 132.580261 70.233489) + (xy 132.580264 70.233501) (xy 132.640602 70.379172) (xy 132.640609 70.379185) (xy 132.72821 70.510288) + (xy 132.728213 70.510292) (xy 132.839707 70.621786) (xy 132.839711 70.621789) (xy 132.970814 70.70939) + (xy 132.970827 70.709397) (xy 133.072952 70.751698) (xy 133.127356 70.795538) (xy 133.149421 70.861833) + (xy 133.1495 70.866259) (xy 133.1495 70.978846) (xy 133.180261 71.133489) (xy 133.180264 71.133501) + (xy 133.240602 71.279172) (xy 133.240609 71.279185) (xy 133.32821 71.410288) (xy 133.328213 71.410292) + (xy 133.439707 71.521786) (xy 133.439711 71.521789) (xy 133.570814 71.60939) (xy 133.570827 71.609397) + (xy 133.716498 71.669735) (xy 133.716503 71.669737) (xy 133.871153 71.700499) (xy 133.871156 71.7005) + (xy 133.871158 71.7005) (xy 134.028844 71.7005) (xy 134.028845 71.700499) (xy 134.183497 71.669737) + (xy 134.329179 71.609394) (xy 134.460289 71.521789) (xy 134.571789 71.410289) (xy 134.659394 71.279179) + (xy 134.719737 71.133497) (xy 134.7505 70.978842) (xy 134.7505 70.821158) (xy 134.7505 70.821155) + (xy 134.750499 70.821153) (xy 134.740272 70.769737) (xy 134.719737 70.666503) (xy 134.680102 70.570814) + (xy 134.659397 70.520827) (xy 134.65939 70.520814) (xy 134.571789 70.389711) (xy 134.571786 70.389707) + (xy 134.460292 70.278213) (xy 134.460288 70.27821) (xy 134.329185 70.190609) (xy 134.329175 70.190604) + (xy 134.227047 70.148301) (xy 134.211481 70.135757) (xy 134.193297 70.127453) (xy 134.184832 70.114282) + (xy 134.172644 70.10446) (xy 134.166331 70.085492) (xy 134.155523 70.068675) (xy 134.15156 70.041114) + (xy 134.150579 70.038166) (xy 134.1505 70.03374) (xy 134.1505 70.021153) (xy 143.9995 70.021153) + (xy 143.9995 70.178846) (xy 144.030261 70.333489) (xy 144.030264 70.333501) (xy 144.090602 70.479172) + (xy 144.090609 70.479185) (xy 144.17821 70.610288) (xy 144.178213 70.610292) (xy 144.289707 70.721786) + (xy 144.289711 70.721789) (xy 144.420814 70.80939) (xy 144.420827 70.809397) (xy 144.522952 70.851698) + (xy 144.577356 70.895538) (xy 144.599421 70.961833) (xy 144.5995 70.966259) (xy 144.5995 71.028846) + (xy 144.630261 71.183489) (xy 144.630264 71.183501) (xy 144.690602 71.329172) (xy 144.690609 71.329185) + (xy 144.77821 71.460288) (xy 144.778213 71.460292) (xy 144.889707 71.571786) (xy 144.889711 71.571789) + (xy 145.020814 71.65939) (xy 145.020827 71.659397) (xy 145.12006 71.7005) (xy 145.166503 71.719737) + (xy 145.321153 71.750499) (xy 145.321156 71.7505) (xy 145.321158 71.7505) (xy 145.478844 71.7505) + (xy 145.478845 71.750499) (xy 145.633497 71.719737) (xy 145.779179 71.659394) (xy 145.910289 71.571789) + (xy 146.021789 71.460289) (xy 146.109394 71.329179) (xy 146.169737 71.183497) (xy 146.2005 71.028842) + (xy 146.2005 70.871158) (xy 146.2005 70.871155) (xy 146.200499 70.871153) (xy 146.178606 70.76109) + (xy 146.169737 70.716503) (xy 146.155959 70.683239) (xy 146.109397 70.570827) (xy 146.10939 70.570814) + (xy 146.021789 70.439711) (xy 146.021786 70.439707) (xy 145.910292 70.328213) (xy 145.910288 70.32821) + (xy 145.779185 70.240609) (xy 145.779175 70.240604) (xy 145.677047 70.198301) (xy 145.622644 70.15446) + (xy 145.600579 70.088166) (xy 145.6005 70.08374) (xy 145.6005 70.021155) (xy 145.600499 70.021153) + (xy 145.569737 69.866503) (xy 145.566534 69.858771) (xy 145.509397 69.720827) (xy 145.50939 69.720814) + (xy 145.421789 69.589711) (xy 145.421786 69.589707) (xy 145.310292 69.478213) (xy 145.310288 69.47821) + (xy 145.179185 69.390609) (xy 145.179172 69.390602) (xy 145.033501 69.330264) (xy 145.033489 69.330261) + (xy 144.878845 69.2995) (xy 144.878842 69.2995) (xy 144.721158 69.2995) (xy 144.721155 69.2995) + (xy 144.56651 69.330261) (xy 144.566498 69.330264) (xy 144.420827 69.390602) (xy 144.420814 69.390609) + (xy 144.289711 69.47821) (xy 144.289707 69.478213) (xy 144.178213 69.589707) (xy 144.17821 69.589711) + (xy 144.090609 69.720814) (xy 144.090602 69.720827) (xy 144.030264 69.866498) (xy 144.030261 69.86651) + (xy 143.9995 70.021153) (xy 134.1505 70.021153) (xy 134.1505 69.921155) (xy 134.150499 69.921153) + (xy 134.119738 69.76651) (xy 134.119737 69.766503) (xy 134.100812 69.720814) (xy 134.059397 69.620827) + (xy 134.05939 69.620814) (xy 133.971789 69.489711) (xy 133.971786 69.489707) (xy 133.860292 69.378213) + (xy 133.860288 69.37821) (xy 133.729185 69.290609) (xy 133.729172 69.290602) (xy 133.583501 69.230264) + (xy 133.583489 69.230261) (xy 133.428845 69.1995) (xy 133.428842 69.1995) (xy 133.271158 69.1995) + (xy 133.271155 69.1995) (xy 133.11651 69.230261) (xy 133.116498 69.230264) (xy 132.970827 69.290602) + (xy 132.970814 69.290609) (xy 132.839711 69.37821) (xy 132.839707 69.378213) (xy 132.728213 69.489707) + (xy 132.72821 69.489711) (xy 132.640609 69.620814) (xy 132.640602 69.620827) (xy 132.580264 69.766498) + (xy 132.580261 69.76651) (xy 132.5495 69.921153) (xy 124.728837 69.921153) (xy 124.783241 69.814379) + (xy 124.86109 69.574785) (xy 124.9005 69.325962) (xy 124.9005 69.074038) (xy 150.0995 69.074038) + (xy 150.0995 69.325962) (xy 150.13891 69.574785) (xy 150.21676 69.814383) (xy 150.295413 69.968747) + (xy 150.322115 70.021153) (xy 150.331132 70.038848) (xy 150.479201 70.242649) (xy 150.479205 70.242654) + (xy 150.657345 70.420794) (xy 150.65735 70.420798) (xy 150.780525 70.510289) (xy 150.861155 70.56887) + (xy 150.965009 70.621786) (xy 151.085616 70.683239) (xy 151.085618 70.683239) (xy 151.085621 70.683241) + (xy 151.325215 70.76109) (xy 151.574038 70.8005) (xy 151.574039 70.8005) (xy 151.825961 70.8005) + (xy 151.825962 70.8005) (xy 152.074785 70.76109) (xy 152.314379 70.683241) (xy 152.538845 70.56887) + (xy 152.742656 70.420793) (xy 152.920793 70.242656) (xy 153.06887 70.038845) (xy 153.183241 69.814379) + (xy 153.26109 69.574785) (xy 153.3005 69.325962) (xy 153.3005 69.074038) (xy 153.26109 68.825215) + (xy 153.183241 68.585621) (xy 153.183239 68.585618) (xy 153.183239 68.585616) (xy 153.141747 68.504184) + (xy 153.06887 68.361155) (xy 153.049952 68.335117) (xy 152.920798 68.15735) (xy 152.920794 68.157345) + (xy 152.742654 67.979205) (xy 152.742649 67.979201) (xy 152.538848 67.831132) (xy 152.538847 67.831131) + (xy 152.538845 67.83113) (xy 152.468747 67.795413) (xy 152.314383 67.71676) (xy 152.074785 67.63891) + (xy 151.825962 67.5995) (xy 151.574038 67.5995) (xy 151.449626 67.619205) (xy 151.325214 67.63891) + (xy 151.085616 67.71676) (xy 150.861151 67.831132) (xy 150.65735 67.979201) (xy 150.657345 67.979205) + (xy 150.479205 68.157345) (xy 150.479201 68.15735) (xy 150.331132 68.361151) (xy 150.21676 68.585616) + (xy 150.13891 68.825214) (xy 150.13891 68.825215) (xy 150.0995 69.074038) (xy 124.9005 69.074038) + (xy 124.86109 68.825215) (xy 124.783241 68.585621) (xy 124.783239 68.585618) (xy 124.783239 68.585616) + (xy 124.741747 68.504184) (xy 124.66887 68.361155) (xy 124.649952 68.335117) (xy 124.520798 68.15735) + (xy 124.520794 68.157345) (xy 124.342654 67.979205) (xy 124.342649 67.979201) (xy 124.138848 67.831132) + (xy 124.138847 67.831131) (xy 124.138845 67.83113) (xy 124.068747 67.795413) (xy 123.914383 67.71676) + (xy 123.674785 67.63891) (xy 123.425962 67.5995) (xy 123.174038 67.5995) (xy 123.049626 67.619205) + (xy 122.925214 67.63891) (xy 122.685616 67.71676) (xy 122.461151 67.831132) (xy 122.25735 67.979201) + (xy 122.257345 67.979205) (xy 122.079205 68.157345) (xy 122.079201 68.15735) (xy 121.931132 68.361151) + (xy 121.81676 68.585616) (xy 121.73891 68.825214) (xy 121.73891 68.825215) (xy 121.6995 69.074038) + (xy 120.2505 69.074038) (xy 120.2505 64.021153) (xy 120.8995 64.021153) (xy 120.8995 64.178846) + (xy 120.930261 64.333489) (xy 120.930264 64.333501) (xy 120.990602 64.479172) (xy 120.990609 64.479185) + (xy 121.07821 64.610288) (xy 121.078213 64.610292) (xy 121.189707 64.721786) (xy 121.189711 64.721789) + (xy 121.320814 64.80939) (xy 121.320827 64.809397) (xy 121.458683 64.866498) (xy 121.466503 64.869737) + (xy 121.621153 64.900499) (xy 121.621156 64.9005) (xy 121.621158 64.9005) (xy 121.778844 64.9005) + (xy 121.778845 64.900499) (xy 121.933497 64.869737) (xy 122.079179 64.809394) (xy 122.210289 64.721789) + (xy 122.231181 64.700896) (xy 122.292501 64.667412) (xy 122.362193 64.672395) (xy 122.418128 64.714266) + (xy 122.433423 64.741126) (xy 122.490602 64.879172) (xy 122.490609 64.879185) (xy 122.57821 65.010288) + (xy 122.578213 65.010292) (xy 122.689707 65.121786) (xy 122.689711 65.121789) (xy 122.820814 65.20939) + (xy 122.820827 65.209397) (xy 122.966498 65.269735) (xy 122.966503 65.269737) (xy 123.121153 65.300499) + (xy 123.121156 65.3005) (xy 123.121158 65.3005) (xy 123.278844 65.3005) (xy 123.278845 65.300499) + (xy 123.433497 65.269737) (xy 123.579179 65.209394) (xy 123.710289 65.121789) (xy 123.821789 65.010289) + (xy 123.909394 64.879179) (xy 123.969737 64.733497) (xy 123.992083 64.621158) (xy 123.992084 64.621153) + (xy 129.9995 64.621153) (xy 129.9995 64.778846) (xy 130.030261 64.933489) (xy 130.030264 64.933501) + (xy 130.090602 65.079172) (xy 130.090609 65.079185) (xy 130.17821 65.210288) (xy 130.178213 65.210292) + (xy 130.289707 65.321786) (xy 130.289711 65.321789) (xy 130.420814 65.40939) (xy 130.420827 65.409397) + (xy 130.566498 65.469735) (xy 130.566503 65.469737) (xy 130.721153 65.500499) (xy 130.721156 65.5005) + (xy 130.721158 65.5005) (xy 130.878844 65.5005) (xy 130.878845 65.500499) (xy 131.033497 65.469737) + (xy 131.179179 65.409394) (xy 131.310289 65.321789) (xy 131.421789 65.210289) (xy 131.509394 65.079179) + (xy 131.533429 65.021153) (xy 144.4495 65.021153) (xy 144.4495 65.178846) (xy 144.480261 65.333489) + (xy 144.480264 65.333501) (xy 144.540602 65.479172) (xy 144.540609 65.479185) (xy 144.62821 65.610288) + (xy 144.628213 65.610292) (xy 144.739707 65.721786) (xy 144.739711 65.721789) (xy 144.870814 65.80939) + (xy 144.870827 65.809397) (xy 145.016498 65.869735) (xy 145.016503 65.869737) (xy 145.171153 65.900499) + (xy 145.171156 65.9005) (xy 145.171158 65.9005) (xy 145.328844 65.9005) (xy 145.328845 65.900499) + (xy 145.483497 65.869737) (xy 145.629179 65.809394) (xy 145.760289 65.721789) (xy 145.871789 65.610289) + (xy 145.959394 65.479179) (xy 146.019737 65.333497) (xy 146.0505 65.178842) (xy 146.0505 65.021158) + (xy 146.0505 65.021155) (xy 146.050499 65.021153) (xy 146.026499 64.900499) (xy 146.019737 64.866503) + (xy 145.967805 64.741126) (xy 145.959397 64.720827) (xy 145.95939 64.720814) (xy 145.871789 64.589711) + (xy 145.871786 64.589707) (xy 145.760292 64.478213) (xy 145.760288 64.47821) (xy 145.629185 64.390609) + (xy 145.629172 64.390602) (xy 145.483501 64.330264) (xy 145.483489 64.330261) (xy 145.328845 64.2995) + (xy 145.328842 64.2995) (xy 145.171158 64.2995) (xy 145.171155 64.2995) (xy 145.01651 64.330261) + (xy 145.016498 64.330264) (xy 144.870827 64.390602) (xy 144.870814 64.390609) (xy 144.739711 64.47821) + (xy 144.739707 64.478213) (xy 144.628213 64.589707) (xy 144.62821 64.589711) (xy 144.540609 64.720814) + (xy 144.540602 64.720827) (xy 144.480264 64.866498) (xy 144.480261 64.86651) (xy 144.4495 65.021153) + (xy 131.533429 65.021153) (xy 131.537929 65.010289) (xy 131.555603 64.967621) (xy 131.555605 64.967614) + (xy 131.569737 64.933497) (xy 131.6005 64.778842) (xy 131.6005 64.621158) (xy 131.6005 64.621155) + (xy 131.600499 64.621153) (xy 131.592083 64.578842) (xy 131.569737 64.466503) (xy 131.550955 64.421158) + (xy 131.509397 64.320827) (xy 131.50939 64.320814) (xy 131.421789 64.189711) (xy 131.421786 64.189707) + (xy 131.310292 64.078213) (xy 131.310288 64.07821) (xy 131.179185 63.990609) (xy 131.179172 63.990602) + (xy 131.033501 63.930264) (xy 131.033489 63.930261) (xy 130.878845 63.8995) (xy 130.878842 63.8995) + (xy 130.721158 63.8995) (xy 130.721155 63.8995) (xy 130.56651 63.930261) (xy 130.566498 63.930264) + (xy 130.420827 63.990602) (xy 130.420814 63.990609) (xy 130.289711 64.07821) (xy 130.289707 64.078213) + (xy 130.178213 64.189707) (xy 130.17821 64.189711) (xy 130.090609 64.320814) (xy 130.090602 64.320827) + (xy 130.030264 64.466498) (xy 130.030261 64.46651) (xy 129.9995 64.621153) (xy 123.992084 64.621153) + (xy 123.998107 64.590875) (xy 123.998107 64.590874) (xy 124.0005 64.578844) (xy 124.0005 64.421155) + (xy 124.000499 64.421153) (xy 123.980543 64.320827) (xy 123.969737 64.266503) (xy 123.937929 64.189711) + (xy 123.909397 64.120827) (xy 123.90939 64.120814) (xy 123.821789 63.989711) (xy 123.821786 63.989707) + (xy 123.710292 63.878213) (xy 123.710288 63.87821) (xy 123.579185 63.790609) (xy 123.579172 63.790602) + (xy 123.433501 63.730264) (xy 123.433489 63.730261) (xy 123.278845 63.6995) (xy 123.278842 63.6995) + (xy 123.121158 63.6995) (xy 123.121155 63.6995) (xy 122.96651 63.730261) (xy 122.966498 63.730264) + (xy 122.820827 63.790602) (xy 122.820814 63.790609) (xy 122.689711 63.87821) (xy 122.668817 63.899104) + (xy 122.607493 63.932588) (xy 122.537801 63.927602) (xy 122.481868 63.885729) (xy 122.46658 63.858883) + (xy 122.409394 63.720821) (xy 122.409392 63.720818) (xy 122.40939 63.720814) (xy 122.321789 63.589711) + (xy 122.321786 63.589707) (xy 122.210292 63.478213) (xy 122.210288 63.47821) (xy 122.079185 63.390609) + (xy 122.079172 63.390602) (xy 121.933501 63.330264) (xy 121.933489 63.330261) (xy 121.778845 63.2995) + (xy 121.778842 63.2995) (xy 121.621158 63.2995) (xy 121.621155 63.2995) (xy 121.46651 63.330261) + (xy 121.466498 63.330264) (xy 121.320827 63.390602) (xy 121.320814 63.390609) (xy 121.189711 63.47821) + (xy 121.189707 63.478213) (xy 121.078213 63.589707) (xy 121.07821 63.589711) (xy 120.990609 63.720814) + (xy 120.990602 63.720827) (xy 120.930264 63.866498) (xy 120.930261 63.86651) (xy 120.8995 64.021153) + (xy 120.2505 64.021153) (xy 120.2505 61.818995) (xy 120.824499 61.818995) (xy 120.851418 61.954322) + (xy 120.851421 61.954332) (xy 120.904221 62.081804) (xy 120.904228 62.081817) (xy 120.980885 62.196541) + (xy 120.980888 62.196545) (xy 121.078454 62.294111) (xy 121.078458 62.294114) (xy 121.193182 62.370771) + (xy 121.193195 62.370778) (xy 121.320667 62.423578) (xy 121.320672 62.42358) (xy 121.320676 62.42358) + (xy 121.320677 62.423581) (xy 121.456004 62.4505) (xy 121.456007 62.4505) (xy 121.593995 62.4505) + (xy 121.685041 62.432389) (xy 121.729328 62.42358) (xy 121.856811 62.370775) (xy 121.971542 62.294114) + (xy 122.069114 62.196542) (xy 122.145775 62.081811) (xy 122.19858 61.954328) (xy 122.2255 61.818995) + (xy 125.074499 61.818995) (xy 125.101418 61.954322) (xy 125.101421 61.954332) (xy 125.154221 62.081804) + (xy 125.154228 62.081817) (xy 125.230885 62.196541) (xy 125.230888 62.196545) (xy 125.328454 62.294111) + (xy 125.328458 62.294114) (xy 125.443182 62.370771) (xy 125.443195 62.370778) (xy 125.570667 62.423578) + (xy 125.570672 62.42358) (xy 125.570676 62.42358) (xy 125.570677 62.423581) (xy 125.706004 62.4505) + (xy 125.706007 62.4505) (xy 125.843995 62.4505) (xy 125.935041 62.432389) (xy 125.979328 62.42358) + (xy 126.106811 62.370775) (xy 126.221542 62.294114) (xy 126.319114 62.196542) (xy 126.395775 62.081811) + (xy 126.44858 61.954328) (xy 126.4755 61.818993) (xy 126.4755 61.681007) (xy 126.4755 61.681004) + (xy 126.448581 61.545677) (xy 126.44858 61.545676) (xy 126.44858 61.545672) (xy 126.448578 61.545667) + (xy 126.395778 61.418195) (xy 126.395771 61.418182) (xy 126.319114 61.303458) (xy 126.319111 61.303454) + (xy 126.221545 61.205888) (xy 126.221541 61.205885) (xy 126.106817 61.129228) (xy 126.106804 61.129221) + (xy 125.979332 61.076421) (xy 125.979322 61.076418) (xy 125.843995 61.0495) (xy 125.843993 61.0495) + (xy 125.706007 61.0495) (xy 125.706005 61.0495) (xy 125.570677 61.076418) (xy 125.570667 61.076421) + (xy 125.443195 61.129221) (xy 125.443182 61.129228) (xy 125.328458 61.205885) (xy 125.328454 61.205888) + (xy 125.230888 61.303454) (xy 125.230885 61.303458) (xy 125.154228 61.418182) (xy 125.154221 61.418195) + (xy 125.101421 61.545667) (xy 125.101418 61.545677) (xy 125.0745 61.681004) (xy 125.0745 61.681007) + (xy 125.0745 61.818993) (xy 125.0745 61.818995) (xy 125.074499 61.818995) (xy 122.2255 61.818995) + (xy 122.2255 61.818993) (xy 122.2255 61.681007) (xy 122.2255 61.681004) (xy 122.198581 61.545677) + (xy 122.19858 61.545676) (xy 122.19858 61.545672) (xy 122.198578 61.545667) (xy 122.145778 61.418195) + (xy 122.145771 61.418182) (xy 122.069114 61.303458) (xy 122.069111 61.303454) (xy 121.971545 61.205888) + (xy 121.971541 61.205885) (xy 121.856817 61.129228) (xy 121.856804 61.129221) (xy 121.729332 61.076421) + (xy 121.729322 61.076418) (xy 121.593995 61.0495) (xy 121.593993 61.0495) (xy 121.456007 61.0495) + (xy 121.456005 61.0495) (xy 121.320677 61.076418) (xy 121.320667 61.076421) (xy 121.193195 61.129221) + (xy 121.193182 61.129228) (xy 121.078458 61.205885) (xy 121.078454 61.205888) (xy 120.980888 61.303454) + (xy 120.980885 61.303458) (xy 120.904228 61.418182) (xy 120.904221 61.418195) (xy 120.851421 61.545667) + (xy 120.851418 61.545677) (xy 120.8245 61.681004) (xy 120.8245 61.681007) (xy 120.8245 61.818993) + (xy 120.8245 61.818995) (xy 120.824499 61.818995) (xy 120.2505 61.818995) (xy 120.2505 60.3745) + (xy 120.270185 60.307461) (xy 120.322989 60.261706) (xy 120.3745 60.2505) (xy 128.876 60.2505) ) ) ) @@ -40880,189 +41606,188 @@ (layer "In2.Cu") (pts (xy 128.943039 60.270185) (xy 128.988794 60.322989) (xy 129 60.3745) (xy 129 63.11) (xy 147 63.11) - (xy 147 62.673992) (xy 149.1345 62.673992) (xy 149.1345 63.326007) (xy 149.173907 63.524119) (xy 149.173909 63.524127) - (xy 149.251212 63.710752) (xy 149.251217 63.710762) (xy 149.363441 63.878718) (xy 149.506281 64.021558) - (xy 149.674237 64.133782) (xy 149.674241 64.133784) (xy 149.674244 64.133786) (xy 149.860873 64.211091) - (xy 150.026777 64.244091) (xy 150.058992 64.250499) (xy 150.058996 64.2505) (xy 150.058997 64.2505) - (xy 150.261004 64.2505) (xy 150.261005 64.250499) (xy 150.459127 64.211091) (xy 150.645756 64.133786) - (xy 150.726562 64.079792) (xy 150.793234 64.058917) (xy 150.860614 64.077401) (xy 150.86434 64.079795) - (xy 150.944479 64.133343) (xy 150.944486 64.133347) (xy 151.131016 64.210609) (xy 151.131025 64.210612) - (xy 151.18 64.220353) (xy 151.18 63.365865) (xy 151.182383 63.341671) (xy 151.1855 63.326002) (xy 151.1855 63.28583) - (xy 151.199745 63.300075) (xy 151.285255 63.349444) (xy 151.38063 63.375) (xy 151.47937 63.375) - (xy 151.574745 63.349444) (xy 151.660255 63.300075) (xy 151.674501 63.285829) (xy 151.674501 63.797874) - (xy 151.67929 63.842421) (xy 151.68 63.855675) (xy 151.68 64.220352) (xy 151.728974 64.210611) (xy 151.728978 64.21061) - (xy 151.809333 64.177326) (xy 151.878802 64.169857) (xy 151.924725 64.189845) (xy 151.924888 64.189547) - (xy 151.92822 64.191366) (xy 151.931095 64.192618) (xy 151.932668 64.193795) (xy 151.93267 64.193797) - (xy 152.067517 64.244091) (xy 152.067516 64.244091) (xy 152.074444 64.244835) (xy 152.127127 64.2505) - (xy 153.272872 64.250499) (xy 153.332483 64.244091) (xy 153.467331 64.193796) (xy 153.582546 64.107546) - (xy 153.668796 63.992331) (xy 153.719091 63.857483) (xy 153.7255 63.797873) (xy 153.725499 62.202128) - (xy 153.719091 62.142517) (xy 153.71117 62.121281) (xy 153.668797 62.007671) (xy 153.668793 62.007664) - (xy 153.582547 61.892455) (xy 153.582544 61.892452) (xy 153.467335 61.806206) (xy 153.467328 61.806202) - (xy 153.332482 61.755908) (xy 153.332483 61.755908) (xy 153.272883 61.749501) (xy 153.272881 61.7495) - (xy 153.272873 61.7495) (xy 153.272864 61.7495) (xy 152.127129 61.7495) (xy 152.127123 61.749501) - (xy 152.067516 61.755908) (xy 151.932671 61.806202) (xy 151.932666 61.806205) (xy 151.931096 61.807381) - (xy 151.929258 61.808066) (xy 151.924886 61.810454) (xy 151.924542 61.809825) (xy 151.865631 61.831796) - (xy 151.809336 61.822673) (xy 151.728984 61.78939) (xy 151.728977 61.789388) (xy 151.68 61.779645) - (xy 151.68 62.144329) (xy 151.679289 62.157584) (xy 151.6745 62.202127) (xy 151.6745 62.71417) (xy 151.660255 62.699925) - (xy 151.574745 62.650556) (xy 151.47937 62.625) (xy 151.38063 62.625) (xy 151.285255 62.650556) - (xy 151.199745 62.699925) (xy 151.1855 62.71417) (xy 151.1855 62.673996) (xy 151.185499 62.673995) - (xy 151.182383 62.658326) (xy 151.18 62.634134) (xy 151.18 61.779646) (xy 151.179999 61.779645) - (xy 151.131022 61.789388) (xy 151.131015 61.78939) (xy 150.944481 61.866654) (xy 150.944479 61.866655) - (xy 150.864337 61.920204) (xy 150.79766 61.941081) (xy 150.73028 61.922596) (xy 150.726558 61.920204) - (xy 150.645754 61.866212) (xy 150.459127 61.788909) (xy 150.459119 61.788907) (xy 150.261007 61.7495) - (xy 150.261003 61.7495) (xy 150.058997 61.7495) (xy 150.058992 61.7495) (xy 149.86088 61.788907) - (xy 149.860872 61.788909) (xy 149.674247 61.866212) (xy 149.674237 61.866217) (xy 149.506281 61.978441) - (xy 149.363441 62.121281) (xy 149.251217 62.289237) (xy 149.251212 62.289247) (xy 149.173909 62.475872) - (xy 149.173907 62.47588) (xy 149.1345 62.673992) (xy 147 62.673992) (xy 147 60.3745) (xy 147.019685 60.307461) - (xy 147.072489 60.261706) (xy 147.124 60.2505) (xy 154.6255 60.2505) (xy 154.692539 60.270185) (xy 154.738294 60.322989) - (xy 154.7495 60.3745) (xy 154.7495 84.102242) (xy 154.729815 84.169281) (xy 154.677011 84.215036) - (xy 154.607853 84.22498) (xy 154.601309 84.223859) (xy 154.478846 84.1995) (xy 154.478842 84.1995) - (xy 154.321158 84.1995) (xy 154.321155 84.1995) (xy 154.16651 84.230261) (xy 154.166498 84.230264) - (xy 154.020827 84.290602) (xy 154.020814 84.290609) (xy 153.889711 84.37821) (xy 153.889707 84.378213) - (xy 153.778213 84.489707) (xy 153.77821 84.489711) (xy 153.690609 84.620814) (xy 153.690602 84.620827) - (xy 153.630264 84.766498) (xy 153.630261 84.76651) (xy 153.5995 84.921153) (xy 153.5995 85.07884) - (xy 153.604962 85.106301) (xy 153.598733 85.175892) (xy 153.55587 85.231069) (xy 153.530797 85.245052) - (xy 153.420824 85.290604) (xy 153.420814 85.290609) (xy 153.289711 85.37821) (xy 153.289707 85.378213) - (xy 153.178213 85.489707) (xy 153.17821 85.489711) (xy 153.090609 85.620814) (xy 153.090602 85.620827) - (xy 153.030264 85.766498) (xy 153.030261 85.76651) (xy 152.9995 85.921153) (xy 152.9995 86.078846) - (xy 153.030261 86.233489) (xy 153.030264 86.233501) (xy 153.090602 86.379172) (xy 153.090609 86.379185) - (xy 153.17821 86.510288) (xy 153.178213 86.510292) (xy 153.289707 86.621786) (xy 153.289711 86.621789) - (xy 153.420814 86.70939) (xy 153.420827 86.709397) (xy 153.558683 86.766498) (xy 153.566503 86.769737) - (xy 153.721153 86.800499) (xy 153.721156 86.8005) (xy 153.721158 86.8005) (xy 153.878844 86.8005) - (xy 153.878845 86.800499) (xy 154.033497 86.769737) (xy 154.179179 86.709394) (xy 154.310289 86.621789) - (xy 154.421789 86.510289) (xy 154.509394 86.379179) (xy 154.510938 86.37545) (xy 154.554778 86.321047) - (xy 154.621072 86.298981) (xy 154.688771 86.316259) (xy 154.736383 86.367395) (xy 154.7495 86.422902) - (xy 154.7495 124.277097) (xy 154.729815 124.344136) (xy 154.677011 124.389891) (xy 154.607853 124.399835) - (xy 154.544297 124.37081) (xy 154.51094 124.324552) (xy 154.509396 124.320826) (xy 154.50939 124.320814) - (xy 154.421789 124.189711) (xy 154.421786 124.189707) (xy 154.310292 124.078213) (xy 154.310288 124.07821) - (xy 154.179185 123.990609) (xy 154.179172 123.990602) (xy 154.033501 123.930264) (xy 154.033489 123.930261) - (xy 153.878845 123.8995) (xy 153.878842 123.8995) (xy 153.721158 123.8995) (xy 153.721155 123.8995) - (xy 153.56651 123.930261) (xy 153.566498 123.930264) (xy 153.420827 123.990602) (xy 153.420814 123.990609) - (xy 153.289711 124.07821) (xy 153.289707 124.078213) (xy 153.178213 124.189707) (xy 153.17821 124.189711) - (xy 153.090609 124.320814) (xy 153.090602 124.320827) (xy 153.030264 124.466498) (xy 153.030261 124.46651) - (xy 152.9995 124.621153) (xy 152.9995 124.778846) (xy 153.030261 124.933489) (xy 153.030264 124.933501) - (xy 153.090602 125.079172) (xy 153.090609 125.079185) (xy 153.17821 125.210288) (xy 153.178213 125.210292) - (xy 153.289707 125.321786) (xy 153.289711 125.321789) (xy 153.420814 125.40939) (xy 153.420827 125.409397) - (xy 153.566498 125.469735) (xy 153.566503 125.469737) (xy 153.721153 125.500499) (xy 153.721156 125.5005) - (xy 153.721158 125.5005) (xy 153.878844 125.5005) (xy 153.878845 125.500499) (xy 154.033497 125.469737) - (xy 154.151592 125.420821) (xy 154.179172 125.409397) (xy 154.179172 125.409396) (xy 154.179179 125.409394) - (xy 154.310289 125.321789) (xy 154.421789 125.210289) (xy 154.509394 125.079179) (xy 154.510938 125.07545) - (xy 154.554778 125.021047) (xy 154.621072 124.998981) (xy 154.688771 125.016259) (xy 154.736383 125.067395) - (xy 154.7495 125.122902) (xy 154.7495 159.5255) (xy 154.729815 159.592539) (xy 154.677011 159.638294) - (xy 154.6255 159.6495) (xy 142.160667 159.6495) (xy 142.093628 159.629815) (xy 142.047873 159.577011) - (xy 142.037929 159.507853) (xy 142.066954 159.444297) (xy 142.113215 159.410939) (xy 142.293671 159.336192) - (xy 142.293684 159.336185) (xy 142.457462 159.226751) (xy 142.457466 159.226748) (xy 142.596748 159.087466) - (xy 142.596751 159.087462) (xy 142.706185 158.923684) (xy 142.706192 158.923671) (xy 142.781569 158.741693) - (xy 142.781572 158.741681) (xy 142.819999 158.548495) (xy 142.82 158.548492) (xy 142.82 158.4) (xy 142.12 158.4) - (xy 142.12 157.9) (xy 142.82 157.9) (xy 142.82 157.751504) (xy 142.781572 157.558318) (xy 142.781569 157.558306) - (xy 142.706192 157.376328) (xy 142.706185 157.376315) (xy 142.596751 157.212537) (xy 142.596748 157.212533) - (xy 142.457466 157.073251) (xy 142.457462 157.073248) (xy 142.293684 156.963814) (xy 142.293671 156.963807) - (xy 142.111691 156.888429) (xy 142.111683 156.888427) (xy 142.07 156.880135) (xy 142.07 157.683011) - (xy 142.06006 157.665795) (xy 142.004205 157.60994) (xy 141.935796 157.570444) (xy 141.859496 157.55) - (xy 141.780504 157.55) (xy 141.704204 157.570444) (xy 141.635795 157.60994) (xy 141.57994 157.665795) - (xy 141.57 157.683011) (xy 141.57 156.880136) (xy 141.569999 156.880135) (xy 141.528316 156.888427) - (xy 141.528308 156.888429) (xy 141.346328 156.963807) (xy 141.346315 156.963814) (xy 141.182537 157.073248) - (xy 141.182533 157.073251) (xy 141.043251 157.212533) (xy 141.043248 157.212537) (xy 140.933814 157.376315) - (xy 140.933807 157.376328) (xy 140.85843 157.558306) (xy 140.858427 157.558318) (xy 140.82 157.751504) - (xy 140.82 157.9) (xy 141.52 157.9) (xy 141.52 158.4) (xy 140.82 158.4) (xy 140.82 158.548495) (xy 140.858427 158.741681) - (xy 140.85843 158.741693) (xy 140.933807 158.923671) (xy 140.933814 158.923684) (xy 141.043248 159.087462) - (xy 141.043251 159.087466) (xy 141.182533 159.226748) (xy 141.182537 159.226751) (xy 141.346315 159.336185) - (xy 141.346328 159.336192) (xy 141.526785 159.410939) (xy 141.581189 159.45478) (xy 141.603254 159.521074) - (xy 141.585975 159.588773) (xy 141.534838 159.636384) (xy 141.479333 159.6495) (xy 133.520667 159.6495) - (xy 133.453628 159.629815) (xy 133.407873 159.577011) (xy 133.397929 159.507853) (xy 133.426954 159.444297) - (xy 133.473215 159.410939) (xy 133.653671 159.336192) (xy 133.653684 159.336185) (xy 133.817462 159.226751) - (xy 133.817466 159.226748) (xy 133.956748 159.087466) (xy 133.956751 159.087462) (xy 134.066185 158.923684) - (xy 134.066192 158.923671) (xy 134.141569 158.741693) (xy 134.141572 158.741681) (xy 134.179999 158.548495) - (xy 134.18 158.548492) (xy 134.18 158.4) (xy 133.48 158.4) (xy 133.48 157.9) (xy 134.18 157.9) (xy 134.18 157.751504) - (xy 134.141572 157.558318) (xy 134.141569 157.558306) (xy 134.066192 157.376328) (xy 134.066185 157.376315) - (xy 133.956751 157.212537) (xy 133.956748 157.212533) (xy 133.817466 157.073251) (xy 133.817462 157.073248) - (xy 133.653684 156.963814) (xy 133.653671 156.963807) (xy 133.471691 156.888429) (xy 133.471683 156.888427) - (xy 133.43 156.880135) (xy 133.43 157.683011) (xy 133.42006 157.665795) (xy 133.364205 157.60994) - (xy 133.295796 157.570444) (xy 133.219496 157.55) (xy 133.140504 157.55) (xy 133.064204 157.570444) - (xy 132.995795 157.60994) (xy 132.93994 157.665795) (xy 132.93 157.683011) (xy 132.93 156.880136) - (xy 132.929999 156.880135) (xy 132.888316 156.888427) (xy 132.888308 156.888429) (xy 132.706328 156.963807) - (xy 132.706315 156.963814) (xy 132.542537 157.073248) (xy 132.542533 157.073251) (xy 132.403251 157.212533) - (xy 132.403248 157.212537) (xy 132.293814 157.376315) (xy 132.293807 157.376328) (xy 132.21843 157.558306) - (xy 132.218427 157.558318) (xy 132.18 157.751504) (xy 132.18 157.9) (xy 132.88 157.9) (xy 132.88 158.4) - (xy 132.18 158.4) (xy 132.18 158.548495) (xy 132.218427 158.741681) (xy 132.21843 158.741693) (xy 132.293807 158.923671) - (xy 132.293814 158.923684) (xy 132.403248 159.087462) (xy 132.403251 159.087466) (xy 132.542533 159.226748) - (xy 132.542537 159.226751) (xy 132.706315 159.336185) (xy 132.706328 159.336192) (xy 132.886785 159.410939) - (xy 132.941189 159.45478) (xy 132.963254 159.521074) (xy 132.945975 159.588773) (xy 132.894838 159.636384) - (xy 132.839333 159.6495) (xy 120.3745 159.6495) (xy 120.307461 159.629815) (xy 120.261706 159.577011) - (xy 120.2505 159.5255) (xy 120.2505 156.374038) (xy 121.3995 156.374038) (xy 121.3995 156.625961) - (xy 121.43891 156.874785) (xy 121.51676 157.114383) (xy 121.595413 157.268747) (xy 121.626228 157.329225) - (xy 121.631132 157.338848) (xy 121.779201 157.542649) (xy 121.779205 157.542654) (xy 121.957345 157.720794) - (xy 121.95735 157.720798) (xy 122.024532 157.769608) (xy 122.161155 157.86887) (xy 122.304184 157.941747) - (xy 122.385616 157.983239) (xy 122.385618 157.983239) (xy 122.385621 157.983241) (xy 122.625215 158.06109) - (xy 122.874038 158.1005) (xy 122.874039 158.1005) (xy 123.125961 158.1005) (xy 123.125962 158.1005) - (xy 123.374785 158.06109) (xy 123.50434 158.018995) (xy 126.174499 158.018995) (xy 126.201418 158.154322) - (xy 126.201421 158.154332) (xy 126.254221 158.281804) (xy 126.254228 158.281817) (xy 126.330885 158.396541) - (xy 126.330888 158.396545) (xy 126.428454 158.494111) (xy 126.428458 158.494114) (xy 126.543182 158.570771) - (xy 126.543195 158.570778) (xy 126.670667 158.623578) (xy 126.670672 158.62358) (xy 126.670676 158.62358) - (xy 126.670677 158.623581) (xy 126.806004 158.6505) (xy 126.806007 158.6505) (xy 126.943995 158.6505) - (xy 127.035041 158.632389) (xy 127.079328 158.62358) (xy 127.206811 158.570775) (xy 127.321542 158.494114) - (xy 127.419114 158.396542) (xy 127.495775 158.281811) (xy 127.54858 158.154328) (xy 127.559287 158.1005) - (xy 127.5755 158.018995) (xy 130.424499 158.018995) (xy 130.451418 158.154322) (xy 130.451421 158.154332) - (xy 130.504221 158.281804) (xy 130.504228 158.281817) (xy 130.580885 158.396541) (xy 130.580888 158.396545) - (xy 130.678454 158.494111) (xy 130.678458 158.494114) (xy 130.793182 158.570771) (xy 130.793195 158.570778) - (xy 130.920667 158.623578) (xy 130.920672 158.62358) (xy 130.920676 158.62358) (xy 130.920677 158.623581) - (xy 131.056004 158.6505) (xy 131.056007 158.6505) (xy 131.193995 158.6505) (xy 131.285041 158.632389) - (xy 131.329328 158.62358) (xy 131.456811 158.570775) (xy 131.571542 158.494114) (xy 131.669114 158.396542) - (xy 131.745775 158.281811) (xy 131.79858 158.154328) (xy 131.809287 158.1005) (xy 131.8255 158.018995) - (xy 131.8255 157.881004) (xy 131.825499 157.881002) (xy 131.803342 157.769608) (xy 131.798581 157.745678) - (xy 131.798581 157.745677) (xy 131.79858 157.745672) (xy 131.765494 157.665795) (xy 131.745778 157.618195) - (xy 131.745771 157.618182) (xy 131.669114 157.503458) (xy 131.669111 157.503454) (xy 131.571545 157.405888) - (xy 131.571541 157.405885) (xy 131.456817 157.329228) (xy 131.456804 157.329221) (xy 131.329332 157.276421) - (xy 131.329322 157.276418) (xy 131.193995 157.2495) (xy 131.193993 157.2495) (xy 131.056007 157.2495) - (xy 131.056005 157.2495) (xy 130.920677 157.276418) (xy 130.920667 157.276421) (xy 130.793195 157.329221) - (xy 130.793182 157.329228) (xy 130.678458 157.405885) (xy 130.678454 157.405888) (xy 130.580888 157.503454) - (xy 130.580885 157.503458) (xy 130.504228 157.618182) (xy 130.504221 157.618195) (xy 130.451421 157.745667) - (xy 130.451418 157.745677) (xy 130.4245 157.881004) (xy 130.4245 157.881007) (xy 130.4245 158.018993) - (xy 130.4245 158.018995) (xy 130.424499 158.018995) (xy 127.5755 158.018995) (xy 127.5755 157.881004) - (xy 127.548581 157.745677) (xy 127.54858 157.745676) (xy 127.54858 157.745672) (xy 127.515494 157.665795) - (xy 127.495778 157.618195) (xy 127.495771 157.618182) (xy 127.419114 157.503458) (xy 127.419111 157.503454) - (xy 127.321545 157.405888) (xy 127.321541 157.405885) (xy 127.206817 157.329228) (xy 127.206804 157.329221) - (xy 127.079332 157.276421) (xy 127.079322 157.276418) (xy 126.943995 157.2495) (xy 126.943993 157.2495) - (xy 126.806007 157.2495) (xy 126.806005 157.2495) (xy 126.670677 157.276418) (xy 126.670667 157.276421) - (xy 126.543195 157.329221) (xy 126.543182 157.329228) (xy 126.428458 157.405885) (xy 126.428454 157.405888) - (xy 126.330888 157.503454) (xy 126.330885 157.503458) (xy 126.254228 157.618182) (xy 126.254221 157.618195) - (xy 126.201421 157.745667) (xy 126.201418 157.745677) (xy 126.1745 157.881004) (xy 126.1745 157.881007) - (xy 126.1745 158.018993) (xy 126.1745 158.018995) (xy 126.174499 158.018995) (xy 123.50434 158.018995) - (xy 123.614379 157.983241) (xy 123.838845 157.86887) (xy 123.919179 157.810504) (xy 123.968602 157.774597) - (xy 124.042649 157.720798) (xy 124.042647 157.720798) (xy 124.042656 157.720793) (xy 124.220793 157.542656) - (xy 124.36887 157.338845) (xy 124.483241 157.114379) (xy 124.56109 156.874785) (xy 124.6005 156.625962) - (xy 124.6005 156.374038) (xy 150.3995 156.374038) (xy 150.3995 156.625961) (xy 150.43891 156.874785) - (xy 150.51676 157.114383) (xy 150.595413 157.268747) (xy 150.626228 157.329225) (xy 150.631132 157.338848) - (xy 150.779201 157.542649) (xy 150.779205 157.542654) (xy 150.957345 157.720794) (xy 150.95735 157.720798) - (xy 151.024532 157.769608) (xy 151.161155 157.86887) (xy 151.304184 157.941747) (xy 151.385616 157.983239) - (xy 151.385618 157.983239) (xy 151.385621 157.983241) (xy 151.625215 158.06109) (xy 151.874038 158.1005) - (xy 151.874039 158.1005) (xy 152.125961 158.1005) (xy 152.125962 158.1005) (xy 152.374785 158.06109) - (xy 152.614379 157.983241) (xy 152.838845 157.86887) (xy 153.042656 157.720793) (xy 153.220793 157.542656) - (xy 153.36887 157.338845) (xy 153.483241 157.114379) (xy 153.56109 156.874785) (xy 153.6005 156.625962) - (xy 153.6005 156.374038) (xy 153.56109 156.125215) (xy 153.483241 155.885621) (xy 153.483239 155.885618) - (xy 153.483239 155.885616) (xy 153.441747 155.804184) (xy 153.36887 155.661155) (xy 153.244419 155.489862) - (xy 153.220798 155.45735) (xy 153.220794 155.457345) (xy 153.042654 155.279205) (xy 153.042649 155.279201) - (xy 152.838848 155.131132) (xy 152.838847 155.131131) (xy 152.838845 155.13113) (xy 152.729663 155.075499) - (xy 152.614383 155.01676) (xy 152.374785 154.93891) (xy 152.31918 154.930103) (xy 152.125962 154.8995) - (xy 151.874038 154.8995) (xy 151.749626 154.919205) (xy 151.625214 154.93891) (xy 151.385616 155.01676) - (xy 151.161151 155.131132) (xy 150.95735 155.279201) (xy 150.957345 155.279205) (xy 150.779205 155.457345) - (xy 150.779201 155.45735) (xy 150.631132 155.661151) (xy 150.51676 155.885616) (xy 150.43891 156.125214) - (xy 150.3995 156.374038) (xy 124.6005 156.374038) (xy 124.56109 156.125215) (xy 124.483241 155.885621) - (xy 124.483239 155.885618) (xy 124.483239 155.885616) (xy 124.441747 155.804184) (xy 124.36887 155.661155) - (xy 124.244419 155.489862) (xy 124.220798 155.45735) (xy 124.220794 155.457345) (xy 124.042654 155.279205) - (xy 124.042649 155.279201) (xy 123.838848 155.131132) (xy 123.838847 155.131131) (xy 123.838845 155.13113) - (xy 123.729663 155.075499) (xy 123.614383 155.01676) (xy 123.374785 154.93891) (xy 123.31918 154.930103) - (xy 123.125962 154.8995) (xy 122.874038 154.8995) (xy 122.749626 154.919205) (xy 122.625214 154.93891) - (xy 122.385616 155.01676) (xy 122.161151 155.131132) (xy 121.95735 155.279201) (xy 121.957345 155.279205) - (xy 121.779205 155.457345) (xy 121.779201 155.45735) (xy 121.631132 155.661151) (xy 121.51676 155.885616) - (xy 121.43891 156.125214) (xy 121.3995 156.374038) (xy 120.2505 156.374038) (xy 120.2505 152.521153) - (xy 124.506679 152.521153) (xy 124.506679 152.678846) (xy 124.53744 152.833489) (xy 124.537443 152.833501) - (xy 124.597781 152.979172) (xy 124.597788 152.979185) (xy 124.685389 153.110288) (xy 124.685392 153.110292) - (xy 124.796886 153.221786) (xy 124.79689 153.221789) (xy 124.927993 153.30939) (xy 124.928006 153.309397) - (xy 125.073677 153.369735) (xy 125.073682 153.369737) (xy 125.228332 153.400499) (xy 125.228335 153.4005) - (xy 125.228337 153.4005) (xy 125.386023 153.4005) (xy 125.386024 153.400499) (xy 125.540676 153.369737) - (xy 125.657122 153.321504) (xy 132.18 153.321504) (xy 132.18 153.72) (xy 132.88 153.72) (xy 132.88 154.22) - (xy 132.18 154.22) (xy 132.18 154.618495) (xy 132.218427 154.811681) (xy 132.21843 154.811693) (xy 132.293807 154.993671) + (xy 147 61.818995) (xy 148.524499 61.818995) (xy 148.551418 61.954322) (xy 148.551421 61.954332) + (xy 148.604221 62.081804) (xy 148.604228 62.081817) (xy 148.680885 62.196541) (xy 148.680888 62.196545) + (xy 148.778454 62.294111) (xy 148.778458 62.294114) (xy 148.893182 62.370771) (xy 148.893195 62.370778) + (xy 149.020667 62.423578) (xy 149.020672 62.42358) (xy 149.020676 62.42358) (xy 149.020677 62.423581) + (xy 149.156004 62.4505) (xy 149.156007 62.4505) (xy 149.293995 62.4505) (xy 149.385041 62.432389) + (xy 149.429328 62.42358) (xy 149.556811 62.370775) (xy 149.671542 62.294114) (xy 149.769114 62.196542) + (xy 149.845775 62.081811) (xy 149.89858 61.954328) (xy 149.9255 61.818995) (xy 152.774499 61.818995) + (xy 152.801418 61.954322) (xy 152.801421 61.954332) (xy 152.854221 62.081804) (xy 152.854228 62.081817) + (xy 152.930885 62.196541) (xy 152.930888 62.196545) (xy 153.028454 62.294111) (xy 153.028458 62.294114) + (xy 153.143182 62.370771) (xy 153.143195 62.370778) (xy 153.270667 62.423578) (xy 153.270672 62.42358) + (xy 153.270676 62.42358) (xy 153.270677 62.423581) (xy 153.406004 62.4505) (xy 153.406007 62.4505) + (xy 153.543995 62.4505) (xy 153.635041 62.432389) (xy 153.679328 62.42358) (xy 153.806811 62.370775) + (xy 153.921542 62.294114) (xy 154.019114 62.196542) (xy 154.095775 62.081811) (xy 154.14858 61.954328) + (xy 154.1755 61.818993) (xy 154.1755 61.681007) (xy 154.1755 61.681004) (xy 154.148581 61.545677) + (xy 154.14858 61.545676) (xy 154.14858 61.545672) (xy 154.148578 61.545667) (xy 154.095778 61.418195) + (xy 154.095771 61.418182) (xy 154.019114 61.303458) (xy 154.019111 61.303454) (xy 153.921545 61.205888) + (xy 153.921541 61.205885) (xy 153.806817 61.129228) (xy 153.806804 61.129221) (xy 153.679332 61.076421) + (xy 153.679322 61.076418) (xy 153.543995 61.0495) (xy 153.543993 61.0495) (xy 153.406007 61.0495) + (xy 153.406005 61.0495) (xy 153.270677 61.076418) (xy 153.270667 61.076421) (xy 153.143195 61.129221) + (xy 153.143182 61.129228) (xy 153.028458 61.205885) (xy 153.028454 61.205888) (xy 152.930888 61.303454) + (xy 152.930885 61.303458) (xy 152.854228 61.418182) (xy 152.854221 61.418195) (xy 152.801421 61.545667) + (xy 152.801418 61.545677) (xy 152.7745 61.681004) (xy 152.7745 61.681007) (xy 152.7745 61.818993) + (xy 152.7745 61.818995) (xy 152.774499 61.818995) (xy 149.9255 61.818995) (xy 149.9255 61.818993) + (xy 149.9255 61.681007) (xy 149.9255 61.681004) (xy 149.898581 61.545677) (xy 149.89858 61.545676) + (xy 149.89858 61.545672) (xy 149.898578 61.545667) (xy 149.845778 61.418195) (xy 149.845771 61.418182) + (xy 149.769114 61.303458) (xy 149.769111 61.303454) (xy 149.671545 61.205888) (xy 149.671541 61.205885) + (xy 149.556817 61.129228) (xy 149.556804 61.129221) (xy 149.429332 61.076421) (xy 149.429322 61.076418) + (xy 149.293995 61.0495) (xy 149.293993 61.0495) (xy 149.156007 61.0495) (xy 149.156005 61.0495) + (xy 149.020677 61.076418) (xy 149.020667 61.076421) (xy 148.893195 61.129221) (xy 148.893182 61.129228) + (xy 148.778458 61.205885) (xy 148.778454 61.205888) (xy 148.680888 61.303454) (xy 148.680885 61.303458) + (xy 148.604228 61.418182) (xy 148.604221 61.418195) (xy 148.551421 61.545667) (xy 148.551418 61.545677) + (xy 148.5245 61.681004) (xy 148.5245 61.681007) (xy 148.5245 61.818993) (xy 148.5245 61.818995) + (xy 148.524499 61.818995) (xy 147 61.818995) (xy 147 60.3745) (xy 147.019685 60.307461) (xy 147.072489 60.261706) + (xy 147.124 60.2505) (xy 154.6255 60.2505) (xy 154.692539 60.270185) (xy 154.738294 60.322989) (xy 154.7495 60.3745) + (xy 154.7495 84.102242) (xy 154.729815 84.169281) (xy 154.677011 84.215036) (xy 154.607853 84.22498) + (xy 154.601309 84.223859) (xy 154.478846 84.1995) (xy 154.478842 84.1995) (xy 154.321158 84.1995) + (xy 154.321155 84.1995) (xy 154.16651 84.230261) (xy 154.166498 84.230264) (xy 154.020827 84.290602) + (xy 154.020814 84.290609) (xy 153.889711 84.37821) (xy 153.889707 84.378213) (xy 153.778213 84.489707) + (xy 153.77821 84.489711) (xy 153.690609 84.620814) (xy 153.690602 84.620827) (xy 153.630264 84.766498) + (xy 153.630261 84.76651) (xy 153.5995 84.921153) (xy 153.5995 85.07884) (xy 153.604962 85.106301) + (xy 153.598733 85.175892) (xy 153.55587 85.231069) (xy 153.530797 85.245052) (xy 153.420824 85.290604) + (xy 153.420814 85.290609) (xy 153.289711 85.37821) (xy 153.289707 85.378213) (xy 153.178213 85.489707) + (xy 153.17821 85.489711) (xy 153.090609 85.620814) (xy 153.090602 85.620827) (xy 153.030264 85.766498) + (xy 153.030261 85.76651) (xy 152.9995 85.921153) (xy 152.9995 86.078846) (xy 153.030261 86.233489) + (xy 153.030264 86.233501) (xy 153.090602 86.379172) (xy 153.090609 86.379185) (xy 153.17821 86.510288) + (xy 153.178213 86.510292) (xy 153.289707 86.621786) (xy 153.289711 86.621789) (xy 153.420814 86.70939) + (xy 153.420827 86.709397) (xy 153.558683 86.766498) (xy 153.566503 86.769737) (xy 153.721153 86.800499) + (xy 153.721156 86.8005) (xy 153.721158 86.8005) (xy 153.878844 86.8005) (xy 153.878845 86.800499) + (xy 154.033497 86.769737) (xy 154.179179 86.709394) (xy 154.310289 86.621789) (xy 154.421789 86.510289) + (xy 154.509394 86.379179) (xy 154.510938 86.37545) (xy 154.554778 86.321047) (xy 154.621072 86.298981) + (xy 154.688771 86.316259) (xy 154.736383 86.367395) (xy 154.7495 86.422902) (xy 154.7495 124.277097) + (xy 154.729815 124.344136) (xy 154.677011 124.389891) (xy 154.607853 124.399835) (xy 154.544297 124.37081) + (xy 154.51094 124.324552) (xy 154.509396 124.320826) (xy 154.50939 124.320814) (xy 154.421789 124.189711) + (xy 154.421786 124.189707) (xy 154.310292 124.078213) (xy 154.310288 124.07821) (xy 154.179185 123.990609) + (xy 154.179172 123.990602) (xy 154.033501 123.930264) (xy 154.033489 123.930261) (xy 153.878845 123.8995) + (xy 153.878842 123.8995) (xy 153.721158 123.8995) (xy 153.721155 123.8995) (xy 153.56651 123.930261) + (xy 153.566498 123.930264) (xy 153.420827 123.990602) (xy 153.420814 123.990609) (xy 153.289711 124.07821) + (xy 153.289707 124.078213) (xy 153.178213 124.189707) (xy 153.17821 124.189711) (xy 153.090609 124.320814) + (xy 153.090602 124.320827) (xy 153.030264 124.466498) (xy 153.030261 124.46651) (xy 152.9995 124.621153) + (xy 152.9995 124.778846) (xy 153.030261 124.933489) (xy 153.030264 124.933501) (xy 153.090602 125.079172) + (xy 153.090609 125.079185) (xy 153.17821 125.210288) (xy 153.178213 125.210292) (xy 153.289707 125.321786) + (xy 153.289711 125.321789) (xy 153.420814 125.40939) (xy 153.420827 125.409397) (xy 153.566498 125.469735) + (xy 153.566503 125.469737) (xy 153.721153 125.500499) (xy 153.721156 125.5005) (xy 153.721158 125.5005) + (xy 153.878844 125.5005) (xy 153.878845 125.500499) (xy 154.033497 125.469737) (xy 154.151592 125.420821) + (xy 154.179172 125.409397) (xy 154.179172 125.409396) (xy 154.179179 125.409394) (xy 154.310289 125.321789) + (xy 154.421789 125.210289) (xy 154.509394 125.079179) (xy 154.510938 125.07545) (xy 154.554778 125.021047) + (xy 154.621072 124.998981) (xy 154.688771 125.016259) (xy 154.736383 125.067395) (xy 154.7495 125.122902) + (xy 154.7495 159.5255) (xy 154.729815 159.592539) (xy 154.677011 159.638294) (xy 154.6255 159.6495) + (xy 142.160667 159.6495) (xy 142.093628 159.629815) (xy 142.047873 159.577011) (xy 142.037929 159.507853) + (xy 142.066954 159.444297) (xy 142.113215 159.410939) (xy 142.293671 159.336192) (xy 142.293684 159.336185) + (xy 142.457462 159.226751) (xy 142.457466 159.226748) (xy 142.596748 159.087466) (xy 142.596751 159.087462) + (xy 142.706185 158.923684) (xy 142.706192 158.923671) (xy 142.781569 158.741693) (xy 142.781572 158.741681) + (xy 142.819999 158.548495) (xy 142.82 158.548492) (xy 142.82 158.4) (xy 142.12 158.4) (xy 142.12 157.9) + (xy 142.82 157.9) (xy 142.82 157.751504) (xy 142.781572 157.558318) (xy 142.781569 157.558306) (xy 142.706192 157.376328) + (xy 142.706185 157.376315) (xy 142.596751 157.212537) (xy 142.596748 157.212533) (xy 142.457466 157.073251) + (xy 142.457462 157.073248) (xy 142.293684 156.963814) (xy 142.293671 156.963807) (xy 142.111691 156.888429) + (xy 142.111683 156.888427) (xy 142.07 156.880135) (xy 142.07 157.683011) (xy 142.06006 157.665795) + (xy 142.004205 157.60994) (xy 141.935796 157.570444) (xy 141.859496 157.55) (xy 141.780504 157.55) + (xy 141.704204 157.570444) (xy 141.635795 157.60994) (xy 141.57994 157.665795) (xy 141.57 157.683011) + (xy 141.57 156.880136) (xy 141.569999 156.880135) (xy 141.528316 156.888427) (xy 141.528308 156.888429) + (xy 141.346328 156.963807) (xy 141.346315 156.963814) (xy 141.182537 157.073248) (xy 141.182533 157.073251) + (xy 141.043251 157.212533) (xy 141.043248 157.212537) (xy 140.933814 157.376315) (xy 140.933807 157.376328) + (xy 140.85843 157.558306) (xy 140.858427 157.558318) (xy 140.82 157.751504) (xy 140.82 157.9) (xy 141.52 157.9) + (xy 141.52 158.4) (xy 140.82 158.4) (xy 140.82 158.548495) (xy 140.858427 158.741681) (xy 140.85843 158.741693) + (xy 140.933807 158.923671) (xy 140.933814 158.923684) (xy 141.043248 159.087462) (xy 141.043251 159.087466) + (xy 141.182533 159.226748) (xy 141.182537 159.226751) (xy 141.346315 159.336185) (xy 141.346328 159.336192) + (xy 141.526785 159.410939) (xy 141.581189 159.45478) (xy 141.603254 159.521074) (xy 141.585975 159.588773) + (xy 141.534838 159.636384) (xy 141.479333 159.6495) (xy 133.520667 159.6495) (xy 133.453628 159.629815) + (xy 133.407873 159.577011) (xy 133.397929 159.507853) (xy 133.426954 159.444297) (xy 133.473215 159.410939) + (xy 133.653671 159.336192) (xy 133.653684 159.336185) (xy 133.817462 159.226751) (xy 133.817466 159.226748) + (xy 133.956748 159.087466) (xy 133.956751 159.087462) (xy 134.066185 158.923684) (xy 134.066192 158.923671) + (xy 134.141569 158.741693) (xy 134.141572 158.741681) (xy 134.179999 158.548495) (xy 134.18 158.548492) + (xy 134.18 158.4) (xy 133.48 158.4) (xy 133.48 157.9) (xy 134.18 157.9) (xy 134.18 157.751504) (xy 134.141572 157.558318) + (xy 134.141569 157.558306) (xy 134.066192 157.376328) (xy 134.066185 157.376315) (xy 133.956751 157.212537) + (xy 133.956748 157.212533) (xy 133.817466 157.073251) (xy 133.817462 157.073248) (xy 133.653684 156.963814) + (xy 133.653671 156.963807) (xy 133.471691 156.888429) (xy 133.471683 156.888427) (xy 133.43 156.880135) + (xy 133.43 157.683011) (xy 133.42006 157.665795) (xy 133.364205 157.60994) (xy 133.295796 157.570444) + (xy 133.219496 157.55) (xy 133.140504 157.55) (xy 133.064204 157.570444) (xy 132.995795 157.60994) + (xy 132.93994 157.665795) (xy 132.93 157.683011) (xy 132.93 156.880136) (xy 132.929999 156.880135) + (xy 132.888316 156.888427) (xy 132.888308 156.888429) (xy 132.706328 156.963807) (xy 132.706315 156.963814) + (xy 132.542537 157.073248) (xy 132.542533 157.073251) (xy 132.403251 157.212533) (xy 132.403248 157.212537) + (xy 132.293814 157.376315) (xy 132.293807 157.376328) (xy 132.21843 157.558306) (xy 132.218427 157.558318) + (xy 132.18 157.751504) (xy 132.18 157.9) (xy 132.88 157.9) (xy 132.88 158.4) (xy 132.18 158.4) (xy 132.18 158.548495) + (xy 132.218427 158.741681) (xy 132.21843 158.741693) (xy 132.293807 158.923671) (xy 132.293814 158.923684) + (xy 132.403248 159.087462) (xy 132.403251 159.087466) (xy 132.542533 159.226748) (xy 132.542537 159.226751) + (xy 132.706315 159.336185) (xy 132.706328 159.336192) (xy 132.886785 159.410939) (xy 132.941189 159.45478) + (xy 132.963254 159.521074) (xy 132.945975 159.588773) (xy 132.894838 159.636384) (xy 132.839333 159.6495) + (xy 120.3745 159.6495) (xy 120.307461 159.629815) (xy 120.261706 159.577011) (xy 120.2505 159.5255) + (xy 120.2505 156.374038) (xy 121.3995 156.374038) (xy 121.3995 156.625961) (xy 121.43891 156.874785) + (xy 121.51676 157.114383) (xy 121.595413 157.268747) (xy 121.626228 157.329225) (xy 121.631132 157.338848) + (xy 121.779201 157.542649) (xy 121.779205 157.542654) (xy 121.957345 157.720794) (xy 121.95735 157.720798) + (xy 122.024532 157.769608) (xy 122.161155 157.86887) (xy 122.304184 157.941747) (xy 122.385616 157.983239) + (xy 122.385618 157.983239) (xy 122.385621 157.983241) (xy 122.625215 158.06109) (xy 122.874038 158.1005) + (xy 122.874039 158.1005) (xy 123.125961 158.1005) (xy 123.125962 158.1005) (xy 123.374785 158.06109) + (xy 123.50434 158.018995) (xy 126.174499 158.018995) (xy 126.201418 158.154322) (xy 126.201421 158.154332) + (xy 126.254221 158.281804) (xy 126.254228 158.281817) (xy 126.330885 158.396541) (xy 126.330888 158.396545) + (xy 126.428454 158.494111) (xy 126.428458 158.494114) (xy 126.543182 158.570771) (xy 126.543195 158.570778) + (xy 126.670667 158.623578) (xy 126.670672 158.62358) (xy 126.670676 158.62358) (xy 126.670677 158.623581) + (xy 126.806004 158.6505) (xy 126.806007 158.6505) (xy 126.943995 158.6505) (xy 127.035041 158.632389) + (xy 127.079328 158.62358) (xy 127.206811 158.570775) (xy 127.321542 158.494114) (xy 127.419114 158.396542) + (xy 127.495775 158.281811) (xy 127.54858 158.154328) (xy 127.559287 158.1005) (xy 127.5755 158.018995) + (xy 130.424499 158.018995) (xy 130.451418 158.154322) (xy 130.451421 158.154332) (xy 130.504221 158.281804) + (xy 130.504228 158.281817) (xy 130.580885 158.396541) (xy 130.580888 158.396545) (xy 130.678454 158.494111) + (xy 130.678458 158.494114) (xy 130.793182 158.570771) (xy 130.793195 158.570778) (xy 130.920667 158.623578) + (xy 130.920672 158.62358) (xy 130.920676 158.62358) (xy 130.920677 158.623581) (xy 131.056004 158.6505) + (xy 131.056007 158.6505) (xy 131.193995 158.6505) (xy 131.285041 158.632389) (xy 131.329328 158.62358) + (xy 131.456811 158.570775) (xy 131.571542 158.494114) (xy 131.669114 158.396542) (xy 131.745775 158.281811) + (xy 131.79858 158.154328) (xy 131.809287 158.1005) (xy 131.8255 158.018995) (xy 131.8255 157.881004) + (xy 131.825499 157.881002) (xy 131.803342 157.769608) (xy 131.798581 157.745678) (xy 131.798581 157.745677) + (xy 131.79858 157.745672) (xy 131.765494 157.665795) (xy 131.745778 157.618195) (xy 131.745771 157.618182) + (xy 131.669114 157.503458) (xy 131.669111 157.503454) (xy 131.571545 157.405888) (xy 131.571541 157.405885) + (xy 131.456817 157.329228) (xy 131.456804 157.329221) (xy 131.329332 157.276421) (xy 131.329322 157.276418) + (xy 131.193995 157.2495) (xy 131.193993 157.2495) (xy 131.056007 157.2495) (xy 131.056005 157.2495) + (xy 130.920677 157.276418) (xy 130.920667 157.276421) (xy 130.793195 157.329221) (xy 130.793182 157.329228) + (xy 130.678458 157.405885) (xy 130.678454 157.405888) (xy 130.580888 157.503454) (xy 130.580885 157.503458) + (xy 130.504228 157.618182) (xy 130.504221 157.618195) (xy 130.451421 157.745667) (xy 130.451418 157.745677) + (xy 130.4245 157.881004) (xy 130.4245 157.881007) (xy 130.4245 158.018993) (xy 130.4245 158.018995) + (xy 130.424499 158.018995) (xy 127.5755 158.018995) (xy 127.5755 157.881004) (xy 127.548581 157.745677) + (xy 127.54858 157.745676) (xy 127.54858 157.745672) (xy 127.515494 157.665795) (xy 127.495778 157.618195) + (xy 127.495771 157.618182) (xy 127.419114 157.503458) (xy 127.419111 157.503454) (xy 127.321545 157.405888) + (xy 127.321541 157.405885) (xy 127.206817 157.329228) (xy 127.206804 157.329221) (xy 127.079332 157.276421) + (xy 127.079322 157.276418) (xy 126.943995 157.2495) (xy 126.943993 157.2495) (xy 126.806007 157.2495) + (xy 126.806005 157.2495) (xy 126.670677 157.276418) (xy 126.670667 157.276421) (xy 126.543195 157.329221) + (xy 126.543182 157.329228) (xy 126.428458 157.405885) (xy 126.428454 157.405888) (xy 126.330888 157.503454) + (xy 126.330885 157.503458) (xy 126.254228 157.618182) (xy 126.254221 157.618195) (xy 126.201421 157.745667) + (xy 126.201418 157.745677) (xy 126.1745 157.881004) (xy 126.1745 157.881007) (xy 126.1745 158.018993) + (xy 126.1745 158.018995) (xy 126.174499 158.018995) (xy 123.50434 158.018995) (xy 123.614379 157.983241) + (xy 123.838845 157.86887) (xy 123.919179 157.810504) (xy 123.968602 157.774597) (xy 124.042649 157.720798) + (xy 124.042647 157.720798) (xy 124.042656 157.720793) (xy 124.220793 157.542656) (xy 124.36887 157.338845) + (xy 124.483241 157.114379) (xy 124.56109 156.874785) (xy 124.6005 156.625962) (xy 124.6005 156.374038) + (xy 150.3995 156.374038) (xy 150.3995 156.625961) (xy 150.43891 156.874785) (xy 150.51676 157.114383) + (xy 150.595413 157.268747) (xy 150.626228 157.329225) (xy 150.631132 157.338848) (xy 150.779201 157.542649) + (xy 150.779205 157.542654) (xy 150.957345 157.720794) (xy 150.95735 157.720798) (xy 151.024532 157.769608) + (xy 151.161155 157.86887) (xy 151.304184 157.941747) (xy 151.385616 157.983239) (xy 151.385618 157.983239) + (xy 151.385621 157.983241) (xy 151.625215 158.06109) (xy 151.874038 158.1005) (xy 151.874039 158.1005) + (xy 152.125961 158.1005) (xy 152.125962 158.1005) (xy 152.374785 158.06109) (xy 152.614379 157.983241) + (xy 152.838845 157.86887) (xy 153.042656 157.720793) (xy 153.220793 157.542656) (xy 153.36887 157.338845) + (xy 153.483241 157.114379) (xy 153.56109 156.874785) (xy 153.6005 156.625962) (xy 153.6005 156.374038) + (xy 153.56109 156.125215) (xy 153.483241 155.885621) (xy 153.483239 155.885618) (xy 153.483239 155.885616) + (xy 153.441747 155.804184) (xy 153.36887 155.661155) (xy 153.244419 155.489862) (xy 153.220798 155.45735) + (xy 153.220794 155.457345) (xy 153.042654 155.279205) (xy 153.042649 155.279201) (xy 152.838848 155.131132) + (xy 152.838847 155.131131) (xy 152.838845 155.13113) (xy 152.729663 155.075499) (xy 152.614383 155.01676) + (xy 152.374785 154.93891) (xy 152.31918 154.930103) (xy 152.125962 154.8995) (xy 151.874038 154.8995) + (xy 151.749626 154.919205) (xy 151.625214 154.93891) (xy 151.385616 155.01676) (xy 151.161151 155.131132) + (xy 150.95735 155.279201) (xy 150.957345 155.279205) (xy 150.779205 155.457345) (xy 150.779201 155.45735) + (xy 150.631132 155.661151) (xy 150.51676 155.885616) (xy 150.43891 156.125214) (xy 150.3995 156.374038) + (xy 124.6005 156.374038) (xy 124.56109 156.125215) (xy 124.483241 155.885621) (xy 124.483239 155.885618) + (xy 124.483239 155.885616) (xy 124.441747 155.804184) (xy 124.36887 155.661155) (xy 124.244419 155.489862) + (xy 124.220798 155.45735) (xy 124.220794 155.457345) (xy 124.042654 155.279205) (xy 124.042649 155.279201) + (xy 123.838848 155.131132) (xy 123.838847 155.131131) (xy 123.838845 155.13113) (xy 123.729663 155.075499) + (xy 123.614383 155.01676) (xy 123.374785 154.93891) (xy 123.31918 154.930103) (xy 123.125962 154.8995) + (xy 122.874038 154.8995) (xy 122.749626 154.919205) (xy 122.625214 154.93891) (xy 122.385616 155.01676) + (xy 122.161151 155.131132) (xy 121.95735 155.279201) (xy 121.957345 155.279205) (xy 121.779205 155.457345) + (xy 121.779201 155.45735) (xy 121.631132 155.661151) (xy 121.51676 155.885616) (xy 121.43891 156.125214) + (xy 121.3995 156.374038) (xy 120.2505 156.374038) (xy 120.2505 152.521153) (xy 124.506679 152.521153) + (xy 124.506679 152.678846) (xy 124.53744 152.833489) (xy 124.537443 152.833501) (xy 124.597781 152.979172) + (xy 124.597788 152.979185) (xy 124.685389 153.110288) (xy 124.685392 153.110292) (xy 124.796886 153.221786) + (xy 124.79689 153.221789) (xy 124.927993 153.30939) (xy 124.928006 153.309397) (xy 125.073677 153.369735) + (xy 125.073682 153.369737) (xy 125.228332 153.400499) (xy 125.228335 153.4005) (xy 125.228337 153.4005) + (xy 125.386023 153.4005) (xy 125.386024 153.400499) (xy 125.540676 153.369737) (xy 125.657122 153.321504) + (xy 132.18 153.321504) (xy 132.18 153.72) (xy 132.88 153.72) (xy 132.88 154.22) (xy 132.18 154.22) + (xy 132.18 154.618495) (xy 132.218427 154.811681) (xy 132.21843 154.811693) (xy 132.293807 154.993671) (xy 132.293814 154.993684) (xy 132.403248 155.157462) (xy 132.403251 155.157466) (xy 132.542533 155.296748) (xy 132.542537 155.296751) (xy 132.706315 155.406185) (xy 132.706328 155.406192) (xy 132.888308 155.481569) (xy 132.93 155.489862) (xy 132.93 154.686988) (xy 132.93994 154.704205) (xy 132.995795 154.76006) @@ -42053,7 +42778,7 @@ (xy 145.509879 90.821947) (xy 145.509878 90.821947) (xy 145.509882 90.82194) (xy 145.570121 90.597126) (xy 145.6005 90.366372) (xy 145.6005 90.133628) (xy 145.570121 89.902874) (xy 145.509882 89.67806) (xy 145.509879 89.678052) (xy 145.420819 89.463039) (xy 145.420811 89.463023) (xy 145.304446 89.261475) - (xy 145.304442 89.261468) (xy 145.163824 89.078211) (xy 145.162757 89.07682) (xy 145.162751 89.076813) + (xy 145.304442 89.261468) (xy 145.211294 89.140075) (xy 145.162757 89.07682) (xy 145.162751 89.076813) (xy 144.998186 88.912248) (xy 144.998179 88.912242) (xy 144.81354 88.770564) (xy 144.813538 88.770562) (xy 144.813532 88.770558) (xy 144.813527 88.770555) (xy 144.813524 88.770553) (xy 144.611976 88.654188) (xy 144.61196 88.65418) (xy 144.396947 88.56512) (xy 144.192327 88.510292) (xy 144.172126 88.504879) @@ -42220,16 +42945,16 @@ (xy 121.303458 92.080885) (xy 121.303454 92.080888) (xy 121.205888 92.178454) (xy 121.205885 92.178458) (xy 121.129228 92.293182) (xy 121.129221 92.293195) (xy 121.076421 92.420667) (xy 121.076418 92.420677) (xy 121.0495 92.556004) (xy 121.0495 92.556007) (xy 121.0495 92.693993) (xy 121.0495 92.693995) - (xy 121.049499 92.693995) (xy 120.2505 92.693995) (xy 120.2505 90.421153) (xy 124.4495 90.421153) - (xy 124.4495 90.578846) (xy 124.480261 90.733489) (xy 124.480264 90.733501) (xy 124.540602 90.879172) - (xy 124.540609 90.879185) (xy 124.62821 91.010288) (xy 124.628213 91.010292) (xy 124.739707 91.121786) - (xy 124.739711 91.121789) (xy 124.870814 91.20939) (xy 124.870827 91.209397) (xy 124.96563 91.248665) - (xy 125.016503 91.269737) (xy 125.140235 91.294349) (xy 125.171153 91.300499) (xy 125.171156 91.3005) - (xy 125.171158 91.3005) (xy 125.328844 91.3005) (xy 125.328845 91.300499) (xy 125.483497 91.269737) - (xy 125.629179 91.209394) (xy 125.760289 91.121789) (xy 125.871789 91.010289) (xy 125.959394 90.879179) - (xy 126.019737 90.733497) (xy 126.0505 90.578842) (xy 126.0505 90.421158) (xy 126.0505 90.421155) - (xy 126.050499 90.421153) (xy 126.042669 90.381789) (xy 126.019737 90.266503) (xy 126.002174 90.224101) - (xy 125.982673 90.177021) (xy 125.964702 90.133634) (xy 129.3995 90.133634) (xy 129.3995 90.366365) + (xy 121.049499 92.693995) (xy 120.2505 92.693995) (xy 120.2505 90.421153) (xy 125.0995 90.421153) + (xy 125.0995 90.578846) (xy 125.130261 90.733489) (xy 125.130264 90.733501) (xy 125.190602 90.879172) + (xy 125.190609 90.879185) (xy 125.27821 91.010288) (xy 125.278213 91.010292) (xy 125.389707 91.121786) + (xy 125.389711 91.121789) (xy 125.520814 91.20939) (xy 125.520827 91.209397) (xy 125.61563 91.248665) + (xy 125.666503 91.269737) (xy 125.790235 91.294349) (xy 125.821153 91.300499) (xy 125.821156 91.3005) + (xy 125.821158 91.3005) (xy 125.978844 91.3005) (xy 125.978845 91.300499) (xy 126.133497 91.269737) + (xy 126.279179 91.209394) (xy 126.410289 91.121789) (xy 126.521789 91.010289) (xy 126.609394 90.879179) + (xy 126.669737 90.733497) (xy 126.7005 90.578842) (xy 126.7005 90.421158) (xy 126.7005 90.421155) + (xy 126.700499 90.421153) (xy 126.692669 90.381789) (xy 126.669737 90.266503) (xy 126.652174 90.224101) + (xy 126.632673 90.177021) (xy 126.614702 90.133634) (xy 129.3995 90.133634) (xy 129.3995 90.366365) (xy 129.399501 90.366382) (xy 129.427471 90.578842) (xy 129.429879 90.597126) (xy 129.487785 90.813235) (xy 129.49012 90.821947) (xy 129.57918 91.03696) (xy 129.579188 91.036976) (xy 129.695553 91.238524) (xy 129.695564 91.23854) (xy 129.837242 91.423179) (xy 129.837248 91.423186) (xy 130.001813 91.587751) @@ -42242,7 +42967,7 @@ (xy 132.78102 91.012333) (xy 132.859879 90.821947) (xy 132.859878 90.821947) (xy 132.859882 90.82194) (xy 132.920121 90.597126) (xy 132.9505 90.366372) (xy 132.9505 90.133628) (xy 132.920121 89.902874) (xy 132.859882 89.67806) (xy 132.859879 89.678052) (xy 132.770819 89.463039) (xy 132.770811 89.463023) - (xy 132.654446 89.261475) (xy 132.654442 89.261468) (xy 132.513824 89.078211) (xy 132.512757 89.07682) + (xy 132.654446 89.261475) (xy 132.654442 89.261468) (xy 132.561294 89.140075) (xy 132.512757 89.07682) (xy 132.512751 89.076813) (xy 132.348186 88.912248) (xy 132.348179 88.912242) (xy 132.16354 88.770564) (xy 132.163538 88.770562) (xy 132.163532 88.770558) (xy 132.163527 88.770555) (xy 132.163524 88.770553) (xy 131.961976 88.654188) (xy 131.96196 88.65418) (xy 131.746947 88.56512) (xy 131.542327 88.510292) @@ -42252,206 +42977,226 @@ (xy 130.388023 88.654188) (xy 130.186475 88.770553) (xy 130.186459 88.770564) (xy 130.00182 88.912242) (xy 130.001813 88.912248) (xy 129.837248 89.076813) (xy 129.837242 89.07682) (xy 129.695564 89.261459) (xy 129.695553 89.261475) (xy 129.579188 89.463023) (xy 129.57918 89.463039) (xy 129.49012 89.678052) - (xy 129.429878 89.902877) (xy 129.399501 90.133617) (xy 129.3995 90.133634) (xy 125.964702 90.133634) - (xy 125.959397 90.120827) (xy 125.95939 90.120814) (xy 125.871789 89.989711) (xy 125.871786 89.989707) - (xy 125.760292 89.878213) (xy 125.760288 89.87821) (xy 125.629185 89.790609) (xy 125.629172 89.790602) - (xy 125.483501 89.730264) (xy 125.483489 89.730261) (xy 125.328845 89.6995) (xy 125.328842 89.6995) - (xy 125.171158 89.6995) (xy 125.171155 89.6995) (xy 125.01651 89.730261) (xy 125.016498 89.730264) - (xy 124.870827 89.790602) (xy 124.870814 89.790609) (xy 124.739711 89.87821) (xy 124.739707 89.878213) - (xy 124.628213 89.989707) (xy 124.62821 89.989711) (xy 124.540609 90.120814) (xy 124.540602 90.120827) - (xy 124.480264 90.266498) (xy 124.480261 90.26651) (xy 124.4495 90.421153) (xy 120.2505 90.421153) + (xy 129.429878 89.902877) (xy 129.399501 90.133617) (xy 129.3995 90.133634) (xy 126.614702 90.133634) + (xy 126.609397 90.120827) (xy 126.60939 90.120814) (xy 126.521789 89.989711) (xy 126.521786 89.989707) + (xy 126.410292 89.878213) (xy 126.410288 89.87821) (xy 126.279185 89.790609) (xy 126.279172 89.790602) + (xy 126.133501 89.730264) (xy 126.133489 89.730261) (xy 125.978845 89.6995) (xy 125.978842 89.6995) + (xy 125.821158 89.6995) (xy 125.821155 89.6995) (xy 125.66651 89.730261) (xy 125.666498 89.730264) + (xy 125.520827 89.790602) (xy 125.520814 89.790609) (xy 125.389711 89.87821) (xy 125.389707 89.878213) + (xy 125.278213 89.989707) (xy 125.27821 89.989711) (xy 125.190609 90.120814) (xy 125.190602 90.120827) + (xy 125.130264 90.266498) (xy 125.130261 90.26651) (xy 125.0995 90.421153) (xy 120.2505 90.421153) (xy 120.2505 88.443995) (xy 121.049499 88.443995) (xy 121.076418 88.579322) (xy 121.076421 88.579332) (xy 121.129221 88.706804) (xy 121.129228 88.706817) (xy 121.205885 88.821541) (xy 121.205888 88.821545) (xy 121.303454 88.919111) (xy 121.303458 88.919114) (xy 121.418182 88.995771) (xy 121.418195 88.995778) (xy 121.545667 89.048578) (xy 121.545672 89.04858) (xy 121.545676 89.04858) (xy 121.545677 89.048581) (xy 121.681004 89.0755) (xy 121.681007 89.0755) (xy 121.818995 89.0755) (xy 121.910041 89.057389) - (xy 121.954328 89.04858) (xy 122.081811 88.995775) (xy 122.196542 88.919114) (xy 122.294114 88.821542) - (xy 122.370775 88.706811) (xy 122.42358 88.579328) (xy 122.443501 88.479179) (xy 122.4505 88.443995) - (xy 122.4505 88.306004) (xy 122.423581 88.170677) (xy 122.42358 88.170676) (xy 122.42358 88.170672) - (xy 122.402482 88.119737) (xy 122.378782 88.062518) (xy 122.370776 88.043192) (xy 122.370775 88.043189) - (xy 122.370773 88.043186) (xy 122.370771 88.043182) (xy 122.356052 88.021153) (xy 123.7995 88.021153) - (xy 123.7995 88.178846) (xy 123.830261 88.333489) (xy 123.830264 88.333501) (xy 123.890602 88.479172) - (xy 123.890609 88.479185) (xy 123.97821 88.610288) (xy 123.978213 88.610292) (xy 124.089707 88.721786) - (xy 124.089711 88.721789) (xy 124.220814 88.80939) (xy 124.220827 88.809397) (xy 124.366498 88.869735) - (xy 124.366503 88.869737) (xy 124.516131 88.8995) (xy 124.521153 88.900499) (xy 124.521156 88.9005) - (xy 124.521158 88.9005) (xy 124.678844 88.9005) (xy 124.678845 88.900499) (xy 124.833497 88.869737) - (xy 124.979179 88.809394) (xy 125.110289 88.721789) (xy 125.221789 88.610289) (xy 125.309394 88.479179) - (xy 125.369737 88.333497) (xy 125.4005 88.178842) (xy 125.4005 88.021158) (xy 125.4005 88.021155) - (xy 125.400499 88.021153) (xy 125.390679 87.971786) (xy 125.369737 87.866503) (xy 125.352431 87.824723) - (xy 125.309397 87.720827) (xy 125.30939 87.720814) (xy 125.221789 87.589711) (xy 125.221786 87.589707) - (xy 125.110292 87.478213) (xy 125.110288 87.47821) (xy 124.979185 87.390609) (xy 124.979173 87.390602) - (xy 124.952674 87.379627) (xy 124.833501 87.330264) (xy 124.833489 87.330261) (xy 124.678845 87.2995) - (xy 124.678842 87.2995) (xy 124.521158 87.2995) (xy 124.521155 87.2995) (xy 124.36651 87.330261) - (xy 124.366498 87.330264) (xy 124.220827 87.390602) (xy 124.220814 87.390609) (xy 124.089711 87.47821) - (xy 124.089707 87.478213) (xy 123.978213 87.589707) (xy 123.97821 87.589711) (xy 123.890609 87.720814) - (xy 123.890602 87.720827) (xy 123.830264 87.866498) (xy 123.830261 87.86651) (xy 123.7995 88.021153) - (xy 122.356052 88.021153) (xy 122.294114 87.928458) (xy 122.294111 87.928454) (xy 122.196545 87.830888) - (xy 122.196541 87.830885) (xy 122.081817 87.754228) (xy 122.081804 87.754221) (xy 121.954332 87.701421) - (xy 121.954322 87.701418) (xy 121.818995 87.6745) (xy 121.818993 87.6745) (xy 121.681007 87.6745) - (xy 121.681005 87.6745) (xy 121.545677 87.701418) (xy 121.545667 87.701421) (xy 121.418195 87.754221) - (xy 121.418182 87.754228) (xy 121.303458 87.830885) (xy 121.303454 87.830888) (xy 121.205888 87.928454) - (xy 121.205885 87.928458) (xy 121.129228 88.043182) (xy 121.129221 88.043195) (xy 121.076421 88.170667) - (xy 121.076418 88.170677) (xy 121.0495 88.306004) (xy 121.0495 88.306007) (xy 121.0495 88.443993) - (xy 121.0495 88.443995) (xy 121.049499 88.443995) (xy 120.2505 88.443995) (xy 120.2505 87.271153) - (xy 130.2995 87.271153) (xy 130.2995 87.428846) (xy 130.330261 87.583489) (xy 130.330264 87.583501) - (xy 130.390602 87.729172) (xy 130.390609 87.729185) (xy 130.47821 87.860288) (xy 130.478213 87.860292) - (xy 130.589707 87.971786) (xy 130.589711 87.971789) (xy 130.720814 88.05939) (xy 130.720827 88.059397) - (xy 130.866498 88.119735) (xy 130.866503 88.119737) (xy 131.021153 88.150499) (xy 131.021156 88.1505) - (xy 131.021158 88.1505) (xy 131.178844 88.1505) (xy 131.178845 88.150499) (xy 131.333497 88.119737) - (xy 131.479179 88.059394) (xy 131.610289 87.971789) (xy 131.721789 87.860289) (xy 131.809394 87.729179) - (xy 131.812854 87.720827) (xy 131.839349 87.656861) (xy 131.869737 87.583497) (xy 131.9005 87.428842) - (xy 131.9005 87.271158) (xy 131.9005 87.271155) (xy 131.900499 87.271153) (xy 131.900217 87.269735) - (xy 131.869737 87.116503) (xy 131.865216 87.105589) (xy 131.809397 86.970827) (xy 131.80939 86.970814) - (xy 131.721789 86.839711) (xy 131.721786 86.839707) (xy 131.610292 86.728213) (xy 131.610288 86.72821) - (xy 131.479185 86.640609) (xy 131.479172 86.640602) (xy 131.333501 86.580264) (xy 131.333489 86.580261) - (xy 131.178845 86.5495) (xy 131.178842 86.5495) (xy 131.021158 86.5495) (xy 131.021155 86.5495) - (xy 130.86651 86.580261) (xy 130.866498 86.580264) (xy 130.720827 86.640602) (xy 130.720814 86.640609) - (xy 130.589711 86.72821) (xy 130.589707 86.728213) (xy 130.478213 86.839707) (xy 130.47821 86.839711) - (xy 130.390609 86.970814) (xy 130.390602 86.970827) (xy 130.330264 87.116498) (xy 130.330261 87.11651) - (xy 130.2995 87.271153) (xy 120.2505 87.271153) (xy 120.2505 86.399941) (xy 133.4745 86.399941) - (xy 133.4745 86.640058) (xy 133.512063 86.877222) (xy 133.586265 87.105593) (xy 133.670626 87.271158) - (xy 133.695276 87.319536) (xy 133.836414 87.513796) (xy 134.006204 87.683586) (xy 134.200464 87.824724) - (xy 134.414411 87.933736) (xy 134.619219 88.000282) (xy 134.676895 88.03972) (xy 134.702518 88.094021) - (xy 134.730261 88.233491) (xy 134.730264 88.233501) (xy 134.790602 88.379172) (xy 134.790609 88.379185) - (xy 134.87821 88.510288) (xy 134.878213 88.510292) (xy 134.989707 88.621786) (xy 134.989711 88.621789) - (xy 135.120814 88.70939) (xy 135.120827 88.709397) (xy 135.266498 88.769735) (xy 135.266503 88.769737) - (xy 135.421153 88.800499) (xy 135.421156 88.8005) (xy 135.505832 88.8005) (xy 135.572871 88.820185) - (xy 135.618626 88.872989) (xy 135.62857 88.942147) (xy 135.608933 88.993392) (xy 135.59061 89.020812) - (xy 135.590602 89.020827) (xy 135.530264 89.166498) (xy 135.530261 89.16651) (xy 135.4995 89.321153) - (xy 135.4995 89.478846) (xy 135.530261 89.633489) (xy 135.530264 89.633501) (xy 135.590602 89.779172) - (xy 135.590609 89.779185) (xy 135.67821 89.910288) (xy 135.678213 89.910292) (xy 135.789707 90.021786) - (xy 135.789711 90.021789) (xy 135.920814 90.10939) (xy 135.920827 90.109397) (xy 136.066498 90.169735) - (xy 136.066503 90.169737) (xy 136.221153 90.200499) (xy 136.221156 90.2005) (xy 136.221158 90.2005) - (xy 136.378844 90.2005) (xy 136.378845 90.200499) (xy 136.533497 90.169737) (xy 136.651592 90.120821) - (xy 136.679172 90.109397) (xy 136.679172 90.109396) (xy 136.679179 90.109394) (xy 136.810289 90.021789) - (xy 136.921789 89.910289) (xy 137.009394 89.779179) (xy 137.069737 89.633497) (xy 137.072193 89.621153) - (xy 139.5995 89.621153) (xy 139.5995 89.778846) (xy 139.630261 89.933489) (xy 139.630264 89.933501) - (xy 139.690602 90.079172) (xy 139.690609 90.079185) (xy 139.77821 90.210288) (xy 139.778213 90.210292) - (xy 139.889707 90.321786) (xy 139.889711 90.321789) (xy 140.020814 90.40939) (xy 140.020827 90.409397) - (xy 140.166498 90.469735) (xy 140.166503 90.469737) (xy 140.321153 90.500499) (xy 140.321156 90.5005) - (xy 140.321158 90.5005) (xy 140.478844 90.5005) (xy 140.478845 90.500499) (xy 140.633497 90.469737) - (xy 140.779179 90.409394) (xy 140.910289 90.321789) (xy 141.021789 90.210289) (xy 141.109394 90.079179) - (xy 141.169737 89.933497) (xy 141.2005 89.778842) (xy 141.2005 89.621158) (xy 141.2005 89.621155) - (xy 141.200499 89.621153) (xy 141.172192 89.478846) (xy 141.169737 89.466503) (xy 141.109534 89.321158) - (xy 141.109397 89.320827) (xy 141.10939 89.320814) (xy 141.021789 89.189711) (xy 141.021786 89.189707) - (xy 140.910292 89.078213) (xy 140.910288 89.07821) (xy 140.779185 88.990609) (xy 140.779172 88.990602) - (xy 140.633501 88.930264) (xy 140.633489 88.930261) (xy 140.478845 88.8995) (xy 140.478842 88.8995) - (xy 140.321158 88.8995) (xy 140.321155 88.8995) (xy 140.16651 88.930261) (xy 140.166498 88.930264) - (xy 140.020827 88.990602) (xy 140.020814 88.990609) (xy 139.889711 89.07821) (xy 139.889707 89.078213) - (xy 139.778213 89.189707) (xy 139.77821 89.189711) (xy 139.690609 89.320814) (xy 139.690602 89.320827) - (xy 139.630264 89.466498) (xy 139.630261 89.46651) (xy 139.5995 89.621153) (xy 137.072193 89.621153) - (xy 137.077683 89.593552) (xy 137.078216 89.590874) (xy 137.078216 89.590873) (xy 137.100499 89.478846) - (xy 137.1005 89.478844) (xy 137.1005 89.321155) (xy 137.100499 89.321153) (xy 137.074353 89.189711) - (xy 137.069737 89.166503) (xy 137.069735 89.166498) (xy 137.009397 89.020827) (xy 137.00939 89.020814) - (xy 136.921789 88.889711) (xy 136.921786 88.889707) (xy 136.810292 88.778213) (xy 136.810288 88.77821) - (xy 136.679185 88.690609) (xy 136.679172 88.690602) (xy 136.533501 88.630264) (xy 136.533489 88.630261) - (xy 136.378845 88.5995) (xy 136.378842 88.5995) (xy 136.294168 88.5995) (xy 136.227129 88.579815) - (xy 136.181374 88.527011) (xy 136.17143 88.457853) (xy 136.175573 88.443995) (xy 152.499499 88.443995) - (xy 152.526418 88.579322) (xy 152.526421 88.579332) (xy 152.579221 88.706804) (xy 152.579228 88.706817) - (xy 152.655885 88.821541) (xy 152.655888 88.821545) (xy 152.753454 88.919111) (xy 152.753458 88.919114) - (xy 152.868182 88.995771) (xy 152.868195 88.995778) (xy 152.995667 89.048578) (xy 152.995672 89.04858) - (xy 152.995676 89.04858) (xy 152.995677 89.048581) (xy 153.131004 89.0755) (xy 153.131007 89.0755) - (xy 153.268995 89.0755) (xy 153.360041 89.057389) (xy 153.404328 89.04858) (xy 153.531811 88.995775) - (xy 153.646542 88.919114) (xy 153.744114 88.821542) (xy 153.820775 88.706811) (xy 153.87358 88.579328) - (xy 153.893501 88.479179) (xy 153.9005 88.443995) (xy 153.9005 88.306004) (xy 153.873581 88.170677) - (xy 153.87358 88.170676) (xy 153.87358 88.170672) (xy 153.852482 88.119737) (xy 153.820778 88.043195) - (xy 153.820771 88.043182) (xy 153.744114 87.928458) (xy 153.744111 87.928454) (xy 153.646545 87.830888) - (xy 153.646541 87.830885) (xy 153.531817 87.754228) (xy 153.531804 87.754221) (xy 153.404332 87.701421) - (xy 153.404322 87.701418) (xy 153.268995 87.6745) (xy 153.268993 87.6745) (xy 153.131007 87.6745) - (xy 153.131005 87.6745) (xy 152.995677 87.701418) (xy 152.995667 87.701421) (xy 152.868195 87.754221) - (xy 152.868182 87.754228) (xy 152.753458 87.830885) (xy 152.753454 87.830888) (xy 152.655888 87.928454) - (xy 152.655885 87.928458) (xy 152.579228 88.043182) (xy 152.579221 88.043195) (xy 152.526421 88.170667) - (xy 152.526418 88.170677) (xy 152.4995 88.306004) (xy 152.4995 88.306007) (xy 152.4995 88.443993) - (xy 152.4995 88.443995) (xy 152.499499 88.443995) (xy 136.175573 88.443995) (xy 136.181883 88.422887) - (xy 136.185859 88.414401) (xy 136.209394 88.379179) (xy 136.269737 88.233497) (xy 136.3005 88.078842) - (xy 136.3005 87.921158) (xy 136.3005 87.921155) (xy 136.270181 87.768734) (xy 136.276408 87.699142) - (xy 136.319271 87.643965) (xy 136.385161 87.62072) (xy 136.453158 87.636788) (xy 136.479479 87.656861) - (xy 136.506204 87.683586) (xy 136.700464 87.824724) (xy 136.782473 87.86651) (xy 136.914406 87.933734) - (xy 136.914408 87.933734) (xy 136.914411 87.933736) (xy 137.142778 88.007937) (xy 137.379941 88.0455) - (xy 137.379942 88.0455) (xy 137.620058 88.0455) (xy 137.620059 88.0455) (xy 137.857222 88.007937) - (xy 138.085589 87.933736) (xy 138.299536 87.824724) (xy 138.493796 87.683586) (xy 138.663586 87.513796) - (xy 138.705324 87.456347) (xy 138.709876 87.451337) (xy 138.723299 87.443147) (xy 139.496624 86.669822) - (xy 139.510778 86.722642) (xy 139.579896 86.842357) (xy 139.677643 86.940104) (xy 139.797358 87.009222) - (xy 139.850177 87.023375) (xy 139.112994 87.760556) (xy 139.112995 87.760557) (xy 139.200722 87.824294) - (xy 139.414598 87.933271) (xy 139.642894 88.00745) (xy 139.879975 88.045) (xy 140.120025 88.045) - (xy 140.357105 88.00745) (xy 140.585401 87.933271) (xy 140.799274 87.824296) (xy 140.887003 87.760556) - (xy 140.887004 87.760556) (xy 140.149822 87.023375) (xy 140.202642 87.009222) (xy 140.322357 86.940104) - (xy 140.420104 86.842357) (xy 140.489222 86.722642) (xy 140.503374 86.669822) (xy 141.240556 87.407004) - (xy 141.240556 87.407003) (xy 141.304296 87.319274) (xy 141.413271 87.105401) (xy 141.473138 86.921153) - (xy 143.1995 86.921153) (xy 143.1995 87.078846) (xy 143.230261 87.233489) (xy 143.230264 87.233501) - (xy 143.290602 87.379172) (xy 143.290609 87.379185) (xy 143.37821 87.510288) (xy 143.378213 87.510292) - (xy 143.489707 87.621786) (xy 143.489711 87.621789) (xy 143.620814 87.70939) (xy 143.620827 87.709397) - (xy 143.766498 87.769735) (xy 143.766503 87.769737) (xy 143.921153 87.800499) (xy 143.921156 87.8005) - (xy 143.921158 87.8005) (xy 144.078844 87.8005) (xy 144.078845 87.800499) (xy 144.233497 87.769737) - (xy 144.351592 87.720821) (xy 144.379172 87.709397) (xy 144.379172 87.709396) (xy 144.379179 87.709394) - (xy 144.510289 87.621789) (xy 144.621789 87.510289) (xy 144.709394 87.379179) (xy 144.769737 87.233497) - (xy 144.8005 87.078842) (xy 144.8005 86.921158) (xy 144.8005 86.921155) (xy 144.800499 86.921153) - (xy 144.792148 86.879172) (xy 144.769737 86.766503) (xy 144.753876 86.72821) (xy 144.709397 86.620827) - (xy 144.70939 86.620814) (xy 144.62179 86.489712) (xy 144.621784 86.489705) (xy 144.553232 86.421153) - (xy 146.6995 86.421153) (xy 146.6995 86.578846) (xy 146.730261 86.733489) (xy 146.730264 86.733501) - (xy 146.790602 86.879172) (xy 146.790609 86.879185) (xy 146.87821 87.010288) (xy 146.878213 87.010292) - (xy 146.989707 87.121786) (xy 146.989711 87.121789) (xy 147.120814 87.20939) (xy 147.120827 87.209397) - (xy 147.266498 87.269735) (xy 147.266503 87.269737) (xy 147.416131 87.2995) (xy 147.421153 87.300499) - (xy 147.421156 87.3005) (xy 147.421158 87.3005) (xy 147.578844 87.3005) (xy 147.578845 87.300499) - (xy 147.733497 87.269737) (xy 147.879179 87.209394) (xy 148.010289 87.121789) (xy 148.121789 87.010289) - (xy 148.209394 86.879179) (xy 148.210252 86.877109) (xy 148.241984 86.800499) (xy 148.269737 86.733497) - (xy 148.3005 86.578842) (xy 148.3005 86.421158) (xy 148.3005 86.421155) (xy 148.300499 86.421153) - (xy 148.29215 86.379179) (xy 148.269737 86.266503) (xy 148.256062 86.233489) (xy 148.209397 86.120827) - (xy 148.20939 86.120814) (xy 148.121789 85.989711) (xy 148.121786 85.989707) (xy 148.010292 85.878213) - (xy 148.010288 85.87821) (xy 147.879185 85.790609) (xy 147.879172 85.790602) (xy 147.733501 85.730264) - (xy 147.733489 85.730261) (xy 147.578845 85.6995) (xy 147.578842 85.6995) (xy 147.421158 85.6995) - (xy 147.421155 85.6995) (xy 147.26651 85.730261) (xy 147.266498 85.730264) (xy 147.120827 85.790602) - (xy 147.120814 85.790609) (xy 146.989711 85.87821) (xy 146.989707 85.878213) (xy 146.878213 85.989707) - (xy 146.87821 85.989711) (xy 146.790609 86.120814) (xy 146.790602 86.120827) (xy 146.730264 86.266498) - (xy 146.730261 86.26651) (xy 146.6995 86.421153) (xy 144.553232 86.421153) (xy 144.510292 86.378213) - (xy 144.510288 86.37821) (xy 144.379185 86.290609) (xy 144.379172 86.290602) (xy 144.233501 86.230264) - (xy 144.233489 86.230261) (xy 144.078845 86.1995) (xy 144.078842 86.1995) (xy 143.921158 86.1995) - (xy 143.921155 86.1995) (xy 143.76651 86.230261) (xy 143.766498 86.230264) (xy 143.620827 86.290602) - (xy 143.620814 86.290609) (xy 143.489711 86.37821) (xy 143.489707 86.378213) (xy 143.378213 86.489707) - (xy 143.37821 86.489711) (xy 143.290609 86.620814) (xy 143.290602 86.620827) (xy 143.230264 86.766498) - (xy 143.230261 86.76651) (xy 143.1995 86.921153) (xy 141.473138 86.921153) (xy 141.487449 86.877109) - (xy 141.487449 86.877106) (xy 141.525 86.640025) (xy 141.525 86.399974) (xy 141.48745 86.162894) - (xy 141.413271 85.934598) (xy 141.304294 85.720722) (xy 141.240557 85.632995) (xy 141.240556 85.632994) - (xy 140.503374 86.370176) (xy 140.489222 86.317358) (xy 140.420104 86.197643) (xy 140.322357 86.099896) - (xy 140.202642 86.030778) (xy 140.149821 86.016624) (xy 140.745293 85.421153) (xy 148.6995 85.421153) - (xy 148.6995 85.578846) (xy 148.730261 85.733489) (xy 148.730264 85.733501) (xy 148.790602 85.879172) - (xy 148.790609 85.879185) (xy 148.87821 86.010288) (xy 148.878213 86.010292) (xy 148.989707 86.121786) - (xy 148.989711 86.121789) (xy 149.120814 86.20939) (xy 149.120827 86.209397) (xy 149.258683 86.266498) - (xy 149.266503 86.269737) (xy 149.413522 86.298981) (xy 149.421153 86.300499) (xy 149.421156 86.3005) - (xy 149.421158 86.3005) (xy 149.578844 86.3005) (xy 149.578845 86.300499) (xy 149.733497 86.269737) - (xy 149.879179 86.209394) (xy 149.93111 86.174694) (xy 149.997785 86.153816) (xy 150.065165 86.1723) - (xy 150.068863 86.174676) (xy 150.120821 86.209394) (xy 150.120823 86.209395) (xy 150.120825 86.209396) - (xy 150.258683 86.266498) (xy 150.266503 86.269737) (xy 150.413522 86.298981) (xy 150.421153 86.300499) - (xy 150.421156 86.3005) (xy 150.421158 86.3005) (xy 150.578844 86.3005) (xy 150.578845 86.300499) - (xy 150.733497 86.269737) (xy 150.879179 86.209394) (xy 151.010289 86.121789) (xy 151.121789 86.010289) - (xy 151.209394 85.879179) (xy 151.269737 85.733497) (xy 151.3005 85.578842) (xy 151.3005 85.421158) - (xy 151.3005 85.421155) (xy 151.300499 85.421153) (xy 151.287622 85.356416) (xy 151.269737 85.266503) - (xy 151.248696 85.215705) (xy 151.209397 85.120827) (xy 151.20939 85.120814) (xy 151.121789 84.989711) - (xy 151.121786 84.989707) (xy 151.010292 84.878213) (xy 151.010288 84.87821) (xy 150.879185 84.790609) - (xy 150.879172 84.790602) (xy 150.733501 84.730264) (xy 150.733489 84.730261) (xy 150.578845 84.6995) - (xy 150.578842 84.6995) (xy 150.421158 84.6995) (xy 150.421155 84.6995) (xy 150.26651 84.730261) - (xy 150.266498 84.730264) (xy 150.120827 84.790602) (xy 150.120814 84.790609) (xy 150.068891 84.825304) - (xy 150.002214 84.846182) (xy 149.934833 84.827698) (xy 149.931109 84.825304) (xy 149.879185 84.790609) - (xy 149.879172 84.790602) (xy 149.733501 84.730264) (xy 149.733489 84.730261) (xy 149.578845 84.6995) - (xy 149.578842 84.6995) (xy 149.421158 84.6995) (xy 149.421155 84.6995) (xy 149.26651 84.730261) - (xy 149.266498 84.730264) (xy 149.120827 84.790602) (xy 149.120814 84.790609) (xy 148.989711 84.87821) - (xy 148.989707 84.878213) (xy 148.878213 84.989707) (xy 148.87821 84.989711) (xy 148.790609 85.120814) - (xy 148.790602 85.120827) (xy 148.730264 85.266498) (xy 148.730261 85.26651) (xy 148.6995 85.421153) - (xy 140.745293 85.421153) (xy 140.887003 85.279443) (xy 140.887003 85.279441) (xy 140.799277 85.215705) - (xy 140.585401 85.106728) (xy 140.357105 85.032549) (xy 140.120025 84.995) (xy 139.879975 84.995) - (xy 139.642894 85.032549) (xy 139.414598 85.106728) (xy 139.200729 85.215701) (xy 139.112995 85.279442) - (xy 139.850178 86.016624) (xy 139.797358 86.030778) (xy 139.677643 86.099896) (xy 139.579896 86.197643) - (xy 139.510778 86.317358) (xy 139.496624 86.370177) (xy 138.737779 85.611331) (xy 138.737082 85.611144) - (xy 138.728371 85.603107) (xy 138.709875 85.588661) (xy 138.705321 85.583647) (xy 138.663586 85.526204) - (xy 138.493796 85.356414) (xy 138.299536 85.215276) (xy 138.287984 85.20939) (xy 138.085593 85.106265) - (xy 137.857222 85.032063) (xy 137.620059 84.9945) (xy 137.379941 84.9945) (xy 137.261359 85.013281) - (xy 137.142777 85.032063) (xy 136.914406 85.106265) (xy 136.700463 85.215276) (xy 136.506201 85.356416) - (xy 136.337681 85.524937) (xy 136.276358 85.558422) (xy 136.206666 85.553438) (xy 136.162319 85.524937) - (xy 135.993798 85.356416) (xy 135.993796 85.356414) (xy 135.799536 85.215276) (xy 135.787984 85.20939) - (xy 135.585593 85.106265) (xy 135.357222 85.032063) (xy 135.120059 84.9945) (xy 134.879941 84.9945) - (xy 134.761359 85.013281) (xy 134.642777 85.032063) (xy 134.414406 85.106265) (xy 134.200463 85.215276) - (xy 134.006201 85.356416) (xy 133.836416 85.526201) (xy 133.695276 85.720463) (xy 133.586265 85.934406) - (xy 133.512063 86.162777) (xy 133.4745 86.399941) (xy 120.2505 86.399941) (xy 120.2505 84.421153) + (xy 121.954328 89.04858) (xy 122.081811 88.995775) (xy 122.101855 88.982382) (xy 123.859259 88.982382) + (xy 123.859259 89.140075) (xy 123.89002 89.294718) (xy 123.890023 89.29473) (xy 123.950361 89.440401) + (xy 123.950368 89.440414) (xy 124.037969 89.571517) (xy 124.037972 89.571521) (xy 124.149466 89.683015) + (xy 124.14947 89.683018) (xy 124.280573 89.770619) (xy 124.280586 89.770626) (xy 124.426257 89.830964) + (xy 124.426262 89.830966) (xy 124.580912 89.861728) (xy 124.580915 89.861729) (xy 124.580917 89.861729) + (xy 124.738603 89.861729) (xy 124.738604 89.861728) (xy 124.893256 89.830966) (xy 125.019091 89.778844) + (xy 125.038931 89.770626) (xy 125.038931 89.770625) (xy 125.038938 89.770623) (xy 125.170048 89.683018) + (xy 125.281548 89.571518) (xy 125.369153 89.440408) (xy 125.429496 89.294726) (xy 125.460259 89.140071) + (xy 125.460259 88.982387) (xy 125.460259 88.982384) (xy 125.460258 88.982382) (xy 125.447673 88.919114) + (xy 125.429496 88.827732) (xy 125.408984 88.778211) (xy 125.369156 88.682056) (xy 125.369149 88.682043) + (xy 125.281548 88.55094) (xy 125.281545 88.550936) (xy 125.170051 88.439442) (xy 125.170047 88.439439) + (xy 125.038944 88.351838) (xy 125.038931 88.351831) (xy 124.89326 88.291493) (xy 124.893248 88.29149) + (xy 124.738604 88.260729) (xy 124.738601 88.260729) (xy 124.580917 88.260729) (xy 124.580914 88.260729) + (xy 124.426269 88.29149) (xy 124.426257 88.291493) (xy 124.280586 88.351831) (xy 124.280573 88.351838) + (xy 124.14947 88.439439) (xy 124.149466 88.439442) (xy 124.037972 88.550936) (xy 124.037969 88.55094) + (xy 123.950368 88.682043) (xy 123.950361 88.682056) (xy 123.890023 88.827727) (xy 123.89002 88.827739) + (xy 123.859259 88.982382) (xy 122.101855 88.982382) (xy 122.196542 88.919114) (xy 122.203414 88.912242) + (xy 122.227043 88.888614) (xy 122.294111 88.821545) (xy 122.294114 88.821542) (xy 122.370775 88.706811) + (xy 122.42358 88.579328) (xy 122.4505 88.443993) (xy 122.4505 88.306007) (xy 122.4505 88.306004) + (xy 122.423581 88.170677) (xy 122.42358 88.170676) (xy 122.42358 88.170672) (xy 122.402482 88.119737) + (xy 122.370778 88.043195) (xy 122.370771 88.043182) (xy 122.294114 87.928458) (xy 122.294111 87.928454) + (xy 122.196545 87.830888) (xy 122.196541 87.830885) (xy 122.081817 87.754228) (xy 122.081804 87.754221) + (xy 121.954332 87.701421) (xy 121.954322 87.701418) (xy 121.818995 87.6745) (xy 121.818993 87.6745) + (xy 121.681007 87.6745) (xy 121.681005 87.6745) (xy 121.545677 87.701418) (xy 121.545667 87.701421) + (xy 121.418195 87.754221) (xy 121.418182 87.754228) (xy 121.303458 87.830885) (xy 121.303454 87.830888) + (xy 121.205888 87.928454) (xy 121.205885 87.928458) (xy 121.129228 88.043182) (xy 121.129221 88.043195) + (xy 121.076421 88.170667) (xy 121.076418 88.170677) (xy 121.0495 88.306004) (xy 121.0495 88.306007) + (xy 121.0495 88.443993) (xy 121.0495 88.443995) (xy 121.049499 88.443995) (xy 120.2505 88.443995) + (xy 120.2505 87.271153) (xy 130.2995 87.271153) (xy 130.2995 87.428846) (xy 130.330261 87.583489) + (xy 130.330264 87.583501) (xy 130.390602 87.729172) (xy 130.390609 87.729185) (xy 130.47821 87.860288) + (xy 130.478213 87.860292) (xy 130.589707 87.971786) (xy 130.589711 87.971789) (xy 130.720814 88.05939) + (xy 130.720827 88.059397) (xy 130.866498 88.119735) (xy 130.866503 88.119737) (xy 131.021153 88.150499) + (xy 131.021156 88.1505) (xy 131.021158 88.1505) (xy 131.178844 88.1505) (xy 131.178845 88.150499) + (xy 131.333497 88.119737) (xy 131.479179 88.059394) (xy 131.610289 87.971789) (xy 131.721789 87.860289) + (xy 131.809394 87.729179) (xy 131.869737 87.583497) (xy 131.9005 87.428842) (xy 131.9005 87.271158) + (xy 131.9005 87.271155) (xy 131.900499 87.271153) (xy 131.900217 87.269735) (xy 131.869737 87.116503) + (xy 131.865216 87.105589) (xy 131.809397 86.970827) (xy 131.80939 86.970814) (xy 131.721789 86.839711) + (xy 131.721786 86.839707) (xy 131.610292 86.728213) (xy 131.610288 86.72821) (xy 131.479185 86.640609) + (xy 131.479172 86.640602) (xy 131.333501 86.580264) (xy 131.333489 86.580261) (xy 131.178845 86.5495) + (xy 131.178842 86.5495) (xy 131.021158 86.5495) (xy 131.021155 86.5495) (xy 130.86651 86.580261) + (xy 130.866498 86.580264) (xy 130.720827 86.640602) (xy 130.720814 86.640609) (xy 130.589711 86.72821) + (xy 130.589707 86.728213) (xy 130.478213 86.839707) (xy 130.47821 86.839711) (xy 130.390609 86.970814) + (xy 130.390602 86.970827) (xy 130.330264 87.116498) (xy 130.330261 87.11651) (xy 130.2995 87.271153) + (xy 120.2505 87.271153) (xy 120.2505 86.221153) (xy 121.7995 86.221153) (xy 121.7995 86.378846) + (xy 121.830261 86.533489) (xy 121.830264 86.533501) (xy 121.890602 86.679172) (xy 121.890609 86.679185) + (xy 121.97821 86.810288) (xy 121.978213 86.810292) (xy 122.089707 86.921786) (xy 122.089711 86.921789) + (xy 122.220814 87.00939) (xy 122.220827 87.009397) (xy 122.306782 87.045) (xy 122.366503 87.069737) + (xy 122.521153 87.100499) (xy 122.521156 87.1005) (xy 122.521158 87.1005) (xy 122.678844 87.1005) + (xy 122.678845 87.100499) (xy 122.833497 87.069737) (xy 122.979179 87.009394) (xy 123.110289 86.921789) + (xy 123.221789 86.810289) (xy 123.309394 86.679179) (xy 123.369737 86.533497) (xy 123.396303 86.399941) + (xy 133.4745 86.399941) (xy 133.4745 86.640058) (xy 133.512063 86.877222) (xy 133.586265 87.105593) + (xy 133.670626 87.271158) (xy 133.695276 87.319536) (xy 133.836414 87.513796) (xy 134.006204 87.683586) + (xy 134.200464 87.824724) (xy 134.414411 87.933736) (xy 134.619219 88.000282) (xy 134.676895 88.03972) + (xy 134.702518 88.094021) (xy 134.730261 88.233491) (xy 134.730264 88.233501) (xy 134.790602 88.379172) + (xy 134.790609 88.379185) (xy 134.87821 88.510288) (xy 134.878213 88.510292) (xy 134.989707 88.621786) + (xy 134.989711 88.621789) (xy 135.120814 88.70939) (xy 135.120827 88.709397) (xy 135.266498 88.769735) + (xy 135.266503 88.769737) (xy 135.421153 88.800499) (xy 135.421156 88.8005) (xy 135.505832 88.8005) + (xy 135.572871 88.820185) (xy 135.618626 88.872989) (xy 135.62857 88.942147) (xy 135.608933 88.993392) + (xy 135.59061 89.020812) (xy 135.590602 89.020827) (xy 135.530264 89.166498) (xy 135.530261 89.16651) + (xy 135.4995 89.321153) (xy 135.4995 89.478846) (xy 135.530261 89.633489) (xy 135.530264 89.633501) + (xy 135.590602 89.779172) (xy 135.590609 89.779185) (xy 135.67821 89.910288) (xy 135.678213 89.910292) + (xy 135.789707 90.021786) (xy 135.789711 90.021789) (xy 135.920814 90.10939) (xy 135.920827 90.109397) + (xy 136.066498 90.169735) (xy 136.066503 90.169737) (xy 136.221153 90.200499) (xy 136.221156 90.2005) + (xy 136.221158 90.2005) (xy 136.378844 90.2005) (xy 136.378845 90.200499) (xy 136.533497 90.169737) + (xy 136.651592 90.120821) (xy 136.679172 90.109397) (xy 136.679172 90.109396) (xy 136.679179 90.109394) + (xy 136.810289 90.021789) (xy 136.921789 89.910289) (xy 137.009394 89.779179) (xy 137.069737 89.633497) + (xy 137.072193 89.621153) (xy 139.5995 89.621153) (xy 139.5995 89.778846) (xy 139.630261 89.933489) + (xy 139.630264 89.933501) (xy 139.690602 90.079172) (xy 139.690609 90.079185) (xy 139.77821 90.210288) + (xy 139.778213 90.210292) (xy 139.889707 90.321786) (xy 139.889711 90.321789) (xy 140.020814 90.40939) + (xy 140.020827 90.409397) (xy 140.166498 90.469735) (xy 140.166503 90.469737) (xy 140.321153 90.500499) + (xy 140.321156 90.5005) (xy 140.321158 90.5005) (xy 140.478844 90.5005) (xy 140.478845 90.500499) + (xy 140.633497 90.469737) (xy 140.779179 90.409394) (xy 140.910289 90.321789) (xy 141.021789 90.210289) + (xy 141.109394 90.079179) (xy 141.169737 89.933497) (xy 141.2005 89.778842) (xy 141.2005 89.621158) + (xy 141.2005 89.621155) (xy 141.200499 89.621153) (xy 141.194476 89.590873) (xy 141.169737 89.466503) + (xy 141.109534 89.321158) (xy 141.109397 89.320827) (xy 141.10939 89.320814) (xy 141.021789 89.189711) + (xy 141.021786 89.189707) (xy 140.910292 89.078213) (xy 140.910288 89.07821) (xy 140.779185 88.990609) + (xy 140.779172 88.990602) (xy 140.633501 88.930264) (xy 140.633489 88.930261) (xy 140.478845 88.8995) + (xy 140.478842 88.8995) (xy 140.321158 88.8995) (xy 140.321155 88.8995) (xy 140.16651 88.930261) + (xy 140.166498 88.930264) (xy 140.020827 88.990602) (xy 140.020814 88.990609) (xy 139.889711 89.07821) + (xy 139.889707 89.078213) (xy 139.778213 89.189707) (xy 139.77821 89.189711) (xy 139.690609 89.320814) + (xy 139.690602 89.320827) (xy 139.630264 89.466498) (xy 139.630261 89.46651) (xy 139.5995 89.621153) + (xy 137.072193 89.621153) (xy 137.077683 89.593552) (xy 137.078216 89.590874) (xy 137.078216 89.590873) + (xy 137.100499 89.478846) (xy 137.1005 89.478844) (xy 137.1005 89.321155) (xy 137.100499 89.321153) + (xy 137.074353 89.189711) (xy 137.069737 89.166503) (xy 137.05879 89.140075) (xy 137.009397 89.020827) + (xy 137.00939 89.020814) (xy 136.921789 88.889711) (xy 136.921786 88.889707) (xy 136.810292 88.778213) + (xy 136.810288 88.77821) (xy 136.679185 88.690609) (xy 136.679172 88.690602) (xy 136.533501 88.630264) + (xy 136.533489 88.630261) (xy 136.378845 88.5995) (xy 136.378842 88.5995) (xy 136.294168 88.5995) + (xy 136.227129 88.579815) (xy 136.181374 88.527011) (xy 136.17143 88.457853) (xy 136.175573 88.443995) + (xy 152.499499 88.443995) (xy 152.526418 88.579322) (xy 152.526421 88.579332) (xy 152.579221 88.706804) + (xy 152.579228 88.706817) (xy 152.655885 88.821541) (xy 152.655888 88.821545) (xy 152.753454 88.919111) + (xy 152.753458 88.919114) (xy 152.868182 88.995771) (xy 152.868195 88.995778) (xy 152.995667 89.048578) + (xy 152.995672 89.04858) (xy 152.995676 89.04858) (xy 152.995677 89.048581) (xy 153.131004 89.0755) + (xy 153.131007 89.0755) (xy 153.268995 89.0755) (xy 153.360041 89.057389) (xy 153.404328 89.04858) + (xy 153.531811 88.995775) (xy 153.646542 88.919114) (xy 153.744114 88.821542) (xy 153.820775 88.706811) + (xy 153.87358 88.579328) (xy 153.9005 88.443993) (xy 153.9005 88.306007) (xy 153.9005 88.306004) + (xy 153.873581 88.170677) (xy 153.87358 88.170676) (xy 153.87358 88.170672) (xy 153.852482 88.119737) + (xy 153.820778 88.043195) (xy 153.820771 88.043182) (xy 153.744114 87.928458) (xy 153.744111 87.928454) + (xy 153.646545 87.830888) (xy 153.646541 87.830885) (xy 153.531817 87.754228) (xy 153.531804 87.754221) + (xy 153.404332 87.701421) (xy 153.404322 87.701418) (xy 153.268995 87.6745) (xy 153.268993 87.6745) + (xy 153.131007 87.6745) (xy 153.131005 87.6745) (xy 152.995677 87.701418) (xy 152.995667 87.701421) + (xy 152.868195 87.754221) (xy 152.868182 87.754228) (xy 152.753458 87.830885) (xy 152.753454 87.830888) + (xy 152.655888 87.928454) (xy 152.655885 87.928458) (xy 152.579228 88.043182) (xy 152.579221 88.043195) + (xy 152.526421 88.170667) (xy 152.526418 88.170677) (xy 152.4995 88.306004) (xy 152.4995 88.306007) + (xy 152.4995 88.443993) (xy 152.4995 88.443995) (xy 152.499499 88.443995) (xy 136.175573 88.443995) + (xy 136.181883 88.422887) (xy 136.185859 88.414401) (xy 136.209394 88.379179) (xy 136.269737 88.233497) + (xy 136.3005 88.078842) (xy 136.3005 87.921158) (xy 136.3005 87.921155) (xy 136.270181 87.768734) + (xy 136.276408 87.699142) (xy 136.319271 87.643965) (xy 136.385161 87.62072) (xy 136.453158 87.636788) + (xy 136.479479 87.656861) (xy 136.506204 87.683586) (xy 136.700464 87.824724) (xy 136.770262 87.860288) + (xy 136.914406 87.933734) (xy 136.914408 87.933734) (xy 136.914411 87.933736) (xy 137.142778 88.007937) + (xy 137.379941 88.0455) (xy 137.379942 88.0455) (xy 137.620058 88.0455) (xy 137.620059 88.0455) + (xy 137.857222 88.007937) (xy 138.085589 87.933736) (xy 138.299536 87.824724) (xy 138.493796 87.683586) + (xy 138.663586 87.513796) (xy 138.705324 87.456347) (xy 138.709876 87.451337) (xy 138.723299 87.443147) + (xy 139.496624 86.669822) (xy 139.510778 86.722642) (xy 139.579896 86.842357) (xy 139.677643 86.940104) + (xy 139.797358 87.009222) (xy 139.850177 87.023375) (xy 139.112994 87.760556) (xy 139.112995 87.760557) + (xy 139.200722 87.824294) (xy 139.414598 87.933271) (xy 139.642894 88.00745) (xy 139.879975 88.045) + (xy 140.120025 88.045) (xy 140.357105 88.00745) (xy 140.585401 87.933271) (xy 140.799274 87.824296) + (xy 140.887003 87.760556) (xy 140.887004 87.760556) (xy 140.149822 87.023375) (xy 140.202642 87.009222) + (xy 140.322357 86.940104) (xy 140.420104 86.842357) (xy 140.489222 86.722642) (xy 140.503374 86.669822) + (xy 141.240556 87.407004) (xy 141.240556 87.407003) (xy 141.304296 87.319274) (xy 141.413271 87.105401) + (xy 141.473138 86.921153) (xy 143.1995 86.921153) (xy 143.1995 87.078846) (xy 143.230261 87.233489) + (xy 143.230264 87.233501) (xy 143.290602 87.379172) (xy 143.290609 87.379185) (xy 143.37821 87.510288) + (xy 143.378213 87.510292) (xy 143.489707 87.621786) (xy 143.489711 87.621789) (xy 143.620814 87.70939) + (xy 143.620827 87.709397) (xy 143.766498 87.769735) (xy 143.766503 87.769737) (xy 143.921153 87.800499) + (xy 143.921156 87.8005) (xy 143.921158 87.8005) (xy 144.078844 87.8005) (xy 144.078845 87.800499) + (xy 144.233497 87.769737) (xy 144.379179 87.709394) (xy 144.510289 87.621789) (xy 144.621789 87.510289) + (xy 144.709394 87.379179) (xy 144.769737 87.233497) (xy 144.8005 87.078842) (xy 144.8005 86.921158) + (xy 144.8005 86.921155) (xy 144.800499 86.921153) (xy 144.792148 86.879172) (xy 144.769737 86.766503) + (xy 144.753876 86.72821) (xy 144.709397 86.620827) (xy 144.70939 86.620814) (xy 144.62179 86.489712) + (xy 144.621784 86.489705) (xy 144.553232 86.421153) (xy 146.6995 86.421153) (xy 146.6995 86.578846) + (xy 146.730261 86.733489) (xy 146.730264 86.733501) (xy 146.790602 86.879172) (xy 146.790609 86.879185) + (xy 146.87821 87.010288) (xy 146.878213 87.010292) (xy 146.989707 87.121786) (xy 146.989711 87.121789) + (xy 147.120814 87.20939) (xy 147.120827 87.209397) (xy 147.266498 87.269735) (xy 147.266503 87.269737) + (xy 147.421153 87.300499) (xy 147.421156 87.3005) (xy 147.421158 87.3005) (xy 147.578844 87.3005) + (xy 147.578845 87.300499) (xy 147.733497 87.269737) (xy 147.879179 87.209394) (xy 148.010289 87.121789) + (xy 148.121789 87.010289) (xy 148.209394 86.879179) (xy 148.210252 86.877109) (xy 148.241984 86.800499) + (xy 148.269737 86.733497) (xy 148.3005 86.578842) (xy 148.3005 86.421158) (xy 148.3005 86.421155) + (xy 148.300499 86.421153) (xy 148.29215 86.379179) (xy 148.269737 86.266503) (xy 148.256062 86.233489) + (xy 148.209397 86.120827) (xy 148.20939 86.120814) (xy 148.121789 85.989711) (xy 148.121786 85.989707) + (xy 148.010292 85.878213) (xy 148.010288 85.87821) (xy 147.879185 85.790609) (xy 147.879172 85.790602) + (xy 147.733501 85.730264) (xy 147.733489 85.730261) (xy 147.578845 85.6995) (xy 147.578842 85.6995) + (xy 147.421158 85.6995) (xy 147.421155 85.6995) (xy 147.26651 85.730261) (xy 147.266498 85.730264) + (xy 147.120827 85.790602) (xy 147.120814 85.790609) (xy 146.989711 85.87821) (xy 146.989707 85.878213) + (xy 146.878213 85.989707) (xy 146.87821 85.989711) (xy 146.790609 86.120814) (xy 146.790602 86.120827) + (xy 146.730264 86.266498) (xy 146.730261 86.26651) (xy 146.6995 86.421153) (xy 144.553232 86.421153) + (xy 144.510292 86.378213) (xy 144.510288 86.37821) (xy 144.379185 86.290609) (xy 144.379172 86.290602) + (xy 144.233501 86.230264) (xy 144.233489 86.230261) (xy 144.078845 86.1995) (xy 144.078842 86.1995) + (xy 143.921158 86.1995) (xy 143.921155 86.1995) (xy 143.76651 86.230261) (xy 143.766498 86.230264) + (xy 143.620827 86.290602) (xy 143.620814 86.290609) (xy 143.489711 86.37821) (xy 143.489707 86.378213) + (xy 143.378213 86.489707) (xy 143.37821 86.489711) (xy 143.290609 86.620814) (xy 143.290602 86.620827) + (xy 143.230264 86.766498) (xy 143.230261 86.76651) (xy 143.1995 86.921153) (xy 141.473138 86.921153) + (xy 141.487449 86.877109) (xy 141.487449 86.877106) (xy 141.525 86.640025) (xy 141.525 86.399974) + (xy 141.48745 86.162894) (xy 141.413271 85.934598) (xy 141.304294 85.720722) (xy 141.240557 85.632995) + (xy 141.240556 85.632994) (xy 140.503374 86.370176) (xy 140.489222 86.317358) (xy 140.420104 86.197643) + (xy 140.322357 86.099896) (xy 140.202642 86.030778) (xy 140.149821 86.016624) (xy 140.745293 85.421153) + (xy 148.6995 85.421153) (xy 148.6995 85.578846) (xy 148.730261 85.733489) (xy 148.730264 85.733501) + (xy 148.790602 85.879172) (xy 148.790609 85.879185) (xy 148.87821 86.010288) (xy 148.878213 86.010292) + (xy 148.989707 86.121786) (xy 148.989711 86.121789) (xy 149.120814 86.20939) (xy 149.120827 86.209397) + (xy 149.258683 86.266498) (xy 149.266503 86.269737) (xy 149.413522 86.298981) (xy 149.421153 86.300499) + (xy 149.421156 86.3005) (xy 149.421158 86.3005) (xy 149.578844 86.3005) (xy 149.578845 86.300499) + (xy 149.733497 86.269737) (xy 149.879179 86.209394) (xy 149.93111 86.174694) (xy 149.997785 86.153816) + (xy 150.065165 86.1723) (xy 150.068863 86.174676) (xy 150.120821 86.209394) (xy 150.120823 86.209395) + (xy 150.120825 86.209396) (xy 150.258683 86.266498) (xy 150.266503 86.269737) (xy 150.413522 86.298981) + (xy 150.421153 86.300499) (xy 150.421156 86.3005) (xy 150.421158 86.3005) (xy 150.578844 86.3005) + (xy 150.578845 86.300499) (xy 150.733497 86.269737) (xy 150.879179 86.209394) (xy 151.010289 86.121789) + (xy 151.121789 86.010289) (xy 151.209394 85.879179) (xy 151.269737 85.733497) (xy 151.3005 85.578842) + (xy 151.3005 85.421158) (xy 151.3005 85.421155) (xy 151.300499 85.421153) (xy 151.287622 85.356416) + (xy 151.269737 85.266503) (xy 151.248696 85.215705) (xy 151.209397 85.120827) (xy 151.20939 85.120814) + (xy 151.121789 84.989711) (xy 151.121786 84.989707) (xy 151.010292 84.878213) (xy 151.010288 84.87821) + (xy 150.879185 84.790609) (xy 150.879172 84.790602) (xy 150.733501 84.730264) (xy 150.733489 84.730261) + (xy 150.578845 84.6995) (xy 150.578842 84.6995) (xy 150.421158 84.6995) (xy 150.421155 84.6995) + (xy 150.26651 84.730261) (xy 150.266498 84.730264) (xy 150.120827 84.790602) (xy 150.120814 84.790609) + (xy 150.068891 84.825304) (xy 150.002214 84.846182) (xy 149.934833 84.827698) (xy 149.931109 84.825304) + (xy 149.879185 84.790609) (xy 149.879172 84.790602) (xy 149.733501 84.730264) (xy 149.733489 84.730261) + (xy 149.578845 84.6995) (xy 149.578842 84.6995) (xy 149.421158 84.6995) (xy 149.421155 84.6995) + (xy 149.26651 84.730261) (xy 149.266498 84.730264) (xy 149.120827 84.790602) (xy 149.120814 84.790609) + (xy 148.989711 84.87821) (xy 148.989707 84.878213) (xy 148.878213 84.989707) (xy 148.87821 84.989711) + (xy 148.790609 85.120814) (xy 148.790602 85.120827) (xy 148.730264 85.266498) (xy 148.730261 85.26651) + (xy 148.6995 85.421153) (xy 140.745293 85.421153) (xy 140.887003 85.279443) (xy 140.887003 85.279441) + (xy 140.799277 85.215705) (xy 140.585401 85.106728) (xy 140.357105 85.032549) (xy 140.120025 84.995) + (xy 139.879975 84.995) (xy 139.642894 85.032549) (xy 139.414598 85.106728) (xy 139.200729 85.215701) + (xy 139.112995 85.279442) (xy 139.850178 86.016624) (xy 139.797358 86.030778) (xy 139.677643 86.099896) + (xy 139.579896 86.197643) (xy 139.510778 86.317358) (xy 139.496624 86.370177) (xy 138.737779 85.611331) + (xy 138.737082 85.611144) (xy 138.728371 85.603107) (xy 138.709875 85.588661) (xy 138.705321 85.583647) + (xy 138.663586 85.526204) (xy 138.493796 85.356414) (xy 138.299536 85.215276) (xy 138.287984 85.20939) + (xy 138.085593 85.106265) (xy 137.857222 85.032063) (xy 137.620059 84.9945) (xy 137.379941 84.9945) + (xy 137.261359 85.013281) (xy 137.142777 85.032063) (xy 136.914406 85.106265) (xy 136.700463 85.215276) + (xy 136.506201 85.356416) (xy 136.337681 85.524937) (xy 136.276358 85.558422) (xy 136.206666 85.553438) + (xy 136.162319 85.524937) (xy 135.993798 85.356416) (xy 135.993796 85.356414) (xy 135.799536 85.215276) + (xy 135.787984 85.20939) (xy 135.585593 85.106265) (xy 135.357222 85.032063) (xy 135.120059 84.9945) + (xy 134.879941 84.9945) (xy 134.761359 85.013281) (xy 134.642777 85.032063) (xy 134.414406 85.106265) + (xy 134.200463 85.215276) (xy 134.006201 85.356416) (xy 133.836416 85.526201) (xy 133.695276 85.720463) + (xy 133.586265 85.934406) (xy 133.512063 86.162777) (xy 133.4745 86.399941) (xy 123.396303 86.399941) + (xy 123.4005 86.378842) (xy 123.4005 86.221158) (xy 123.4005 86.221155) (xy 123.400499 86.221153) + (xy 123.396192 86.1995) (xy 123.369737 86.066503) (xy 123.369735 86.066498) (xy 123.309397 85.920827) + (xy 123.30939 85.920814) (xy 123.221789 85.789711) (xy 123.221786 85.789707) (xy 123.110292 85.678213) + (xy 123.110288 85.67821) (xy 122.979185 85.590609) (xy 122.979172 85.590602) (xy 122.833501 85.530264) + (xy 122.833489 85.530261) (xy 122.678845 85.4995) (xy 122.678842 85.4995) (xy 122.521158 85.4995) + (xy 122.521155 85.4995) (xy 122.36651 85.530261) (xy 122.366498 85.530264) (xy 122.220827 85.590602) + (xy 122.220814 85.590609) (xy 122.089711 85.67821) (xy 122.089707 85.678213) (xy 121.978213 85.789707) + (xy 121.97821 85.789711) (xy 121.890609 85.920814) (xy 121.890602 85.920827) (xy 121.830264 86.066498) + (xy 121.830261 86.06651) (xy 121.7995 86.221153) (xy 120.2505 86.221153) (xy 120.2505 83.921153) + (xy 125.958449 83.921153) (xy 125.958449 84.078846) (xy 125.98921 84.233489) (xy 125.989213 84.233501) + (xy 126.049551 84.379172) (xy 126.049558 84.379185) (xy 126.137159 84.510288) (xy 126.137162 84.510292) + (xy 126.248656 84.621786) (xy 126.24866 84.621789) (xy 126.379763 84.70939) (xy 126.379776 84.709397) + (xy 126.517632 84.766498) (xy 126.525452 84.769737) (xy 126.680102 84.800499) (xy 126.680105 84.8005) + (xy 126.680107 84.8005) (xy 126.837793 84.8005) (xy 126.837794 84.800499) (xy 126.992446 84.769737) + (xy 127.138128 84.709394) (xy 127.269238 84.621789) (xy 127.380738 84.510289) (xy 127.440297 84.421153) (xy 141.1995 84.421153) (xy 141.1995 84.578846) (xy 141.230261 84.733489) (xy 141.230264 84.733501) (xy 141.290602 84.879172) (xy 141.290609 84.879185) (xy 141.37821 85.010288) (xy 141.378213 85.010292) (xy 141.489707 85.121786) (xy 141.489711 85.121789) (xy 141.620814 85.20939) (xy 141.620827 85.209397) @@ -42468,7 +43213,7 @@ (xy 143.879172 85.209396) (xy 143.879179 85.209394) (xy 144.010289 85.121789) (xy 144.121789 85.010289) (xy 144.209394 84.879179) (xy 144.269737 84.733497) (xy 144.3005 84.578842) (xy 144.3005 84.421158) (xy 144.3005 84.421155) (xy 144.300499 84.421153) (xy 144.274531 84.290606) (xy 144.269737 84.266503) - (xy 144.269735 84.266498) (xy 144.209397 84.120827) (xy 144.20939 84.120814) (xy 144.121789 83.989711) + (xy 144.256062 84.233489) (xy 144.209397 84.120827) (xy 144.20939 84.120814) (xy 144.121789 83.989711) (xy 144.121786 83.989707) (xy 144.010292 83.878213) (xy 144.010288 83.87821) (xy 143.879185 83.790609) (xy 143.879172 83.790602) (xy 143.733501 83.730264) (xy 143.733489 83.730261) (xy 143.578845 83.6995) (xy 143.578842 83.6995) (xy 143.421158 83.6995) (xy 143.421155 83.6995) (xy 143.26651 83.730261) @@ -42480,21 +43225,24 @@ (xy 141.921158 83.6995) (xy 141.921155 83.6995) (xy 141.76651 83.730261) (xy 141.766498 83.730264) (xy 141.620827 83.790602) (xy 141.620814 83.790609) (xy 141.489711 83.87821) (xy 141.489707 83.878213) (xy 141.378213 83.989707) (xy 141.37821 83.989711) (xy 141.290609 84.120814) (xy 141.290602 84.120827) - (xy 141.230264 84.266498) (xy 141.230261 84.26651) (xy 141.1995 84.421153) (xy 120.2505 84.421153) - (xy 120.2505 81.274038) (xy 121.7995 81.274038) (xy 121.7995 81.525962) (xy 121.83811 81.769735) - (xy 121.83891 81.774785) (xy 121.91676 82.014383) (xy 121.995413 82.168747) (xy 122.026757 82.230263) - (xy 122.031132 82.238848) (xy 122.179201 82.442649) (xy 122.179205 82.442654) (xy 122.357345 82.620794) - (xy 122.35735 82.620798) (xy 122.535117 82.749952) (xy 122.561155 82.76887) (xy 122.704184 82.841747) - (xy 122.785616 82.883239) (xy 122.785618 82.883239) (xy 122.785621 82.883241) (xy 123.025215 82.96109) - (xy 123.274038 83.0005) (xy 123.274039 83.0005) (xy 123.525961 83.0005) (xy 123.525962 83.0005) - (xy 123.774785 82.96109) (xy 123.897698 82.921153) (xy 146.6995 82.921153) (xy 146.6995 83.078846) + (xy 141.230264 84.266498) (xy 141.230261 84.26651) (xy 141.1995 84.421153) (xy 127.440297 84.421153) + (xy 127.468343 84.379179) (xy 127.528686 84.233497) (xy 127.559449 84.078842) (xy 127.559449 83.921158) + (xy 127.559449 83.921155) (xy 127.559448 83.921153) (xy 127.53348 83.790606) (xy 127.528686 83.766503) + (xy 127.528684 83.766498) (xy 127.468346 83.620827) (xy 127.468339 83.620814) (xy 127.380738 83.489711) + (xy 127.380735 83.489707) (xy 127.269241 83.378213) (xy 127.269237 83.37821) (xy 127.138134 83.290609) + (xy 127.138121 83.290602) (xy 126.99245 83.230264) (xy 126.992438 83.230261) (xy 126.837794 83.1995) + (xy 126.837791 83.1995) (xy 126.680107 83.1995) (xy 126.680104 83.1995) (xy 126.525459 83.230261) + (xy 126.525447 83.230264) (xy 126.379776 83.290602) (xy 126.379763 83.290609) (xy 126.24866 83.37821) + (xy 126.248656 83.378213) (xy 126.137162 83.489707) (xy 126.137159 83.489711) (xy 126.049558 83.620814) + (xy 126.049551 83.620827) (xy 125.989213 83.766498) (xy 125.98921 83.76651) (xy 125.958449 83.921153) + (xy 120.2505 83.921153) (xy 120.2505 82.921153) (xy 146.6995 82.921153) (xy 146.6995 83.078846) (xy 146.730261 83.233489) (xy 146.730264 83.233501) (xy 146.790602 83.379172) (xy 146.790609 83.379185) (xy 146.87821 83.510288) (xy 146.878213 83.510292) (xy 146.989707 83.621786) (xy 146.989711 83.621789) - (xy 147.120814 83.70939) (xy 147.120827 83.709397) (xy 147.266498 83.769735) (xy 147.266503 83.769737) + (xy 147.120814 83.70939) (xy 147.120827 83.709397) (xy 147.258683 83.766498) (xy 147.266503 83.769737) (xy 147.421153 83.800499) (xy 147.421156 83.8005) (xy 147.421158 83.8005) (xy 147.578844 83.8005) (xy 147.578845 83.800499) (xy 147.733497 83.769737) (xy 147.879179 83.709394) (xy 148.010289 83.621789) (xy 148.121789 83.510289) (xy 148.209394 83.379179) (xy 148.269737 83.233497) (xy 148.3005 83.078842) - (xy 148.3005 82.921158) (xy 148.3005 82.921155) (xy 148.300499 82.921153) (xy 148.277311 82.804581) + (xy 148.3005 82.921158) (xy 148.3005 82.921155) (xy 148.300499 82.921153) (xy 148.269738 82.76651) (xy 148.269737 82.766503) (xy 148.269735 82.766498) (xy 148.209397 82.620827) (xy 148.20939 82.620814) (xy 148.121789 82.489711) (xy 148.121786 82.489707) (xy 148.010292 82.378213) (xy 148.010288 82.37821) (xy 147.879185 82.290609) (xy 147.879172 82.290602) (xy 147.733501 82.230264) (xy 147.733489 82.230261) @@ -42502,12 +43250,13 @@ (xy 147.26651 82.230261) (xy 147.266498 82.230264) (xy 147.120827 82.290602) (xy 147.120814 82.290609) (xy 146.989711 82.37821) (xy 146.989707 82.378213) (xy 146.878213 82.489707) (xy 146.87821 82.489711) (xy 146.790609 82.620814) (xy 146.790602 82.620827) (xy 146.730264 82.766498) (xy 146.730261 82.76651) - (xy 146.6995 82.921153) (xy 123.897698 82.921153) (xy 124.014379 82.883241) (xy 124.238845 82.76887) - (xy 124.442656 82.620793) (xy 124.620793 82.442656) (xy 124.76887 82.238845) (xy 124.883241 82.014379) - (xy 124.96109 81.774785) (xy 125.0005 81.525962) (xy 125.0005 81.274038) (xy 124.96109 81.025215) - (xy 124.883241 80.785621) (xy 124.883239 80.785618) (xy 124.883239 80.785616) (xy 124.826439 80.674141) - (xy 124.76887 80.561155) (xy 124.684192 80.444605) (xy 124.643033 80.387954) (xy 124.64303 80.387951) - (xy 124.635955 80.378213) (xy 124.620793 80.357344) (xy 124.584602 80.321153) (xy 132.5995 80.321153) + (xy 146.6995 82.921153) (xy 120.2505 82.921153) (xy 120.2505 78.721153) (xy 132.5495 78.721153) + (xy 132.5495 78.878846) (xy 132.580261 79.033489) (xy 132.580264 79.033501) (xy 132.640602 79.179172) + (xy 132.640609 79.179185) (xy 132.72821 79.310288) (xy 132.728213 79.310292) (xy 132.839707 79.421786) + (xy 132.839711 79.421789) (xy 132.975886 79.512779) (xy 132.974515 79.51483) (xy 133.016636 79.55617) + (xy 133.032125 79.624301) (xy 133.008321 79.689991) (xy 132.977256 79.719713) (xy 132.889713 79.778208) + (xy 132.889707 79.778213) (xy 132.778213 79.889707) (xy 132.77821 79.889711) (xy 132.690609 80.020814) + (xy 132.690602 80.020827) (xy 132.630264 80.166498) (xy 132.630261 80.16651) (xy 132.5995 80.321153) (xy 132.5995 80.478846) (xy 132.630261 80.633489) (xy 132.630264 80.633501) (xy 132.690602 80.779172) (xy 132.690609 80.779185) (xy 132.77821 80.910288) (xy 132.778213 80.910292) (xy 132.889707 81.021786) (xy 132.889711 81.021789) (xy 133.020814 81.10939) (xy 133.020827 81.109397) (xy 133.166498 81.169735) @@ -42531,7 +43280,7 @@ (xy 137.120814 81.70939) (xy 137.120827 81.709397) (xy 137.266498 81.769735) (xy 137.266503 81.769737) (xy 137.421153 81.800499) (xy 137.421156 81.8005) (xy 137.421158 81.8005) (xy 137.578844 81.8005) (xy 137.578845 81.800499) (xy 137.733497 81.769737) (xy 137.879179 81.709394) (xy 138.010289 81.621789) - (xy 138.121789 81.510289) (xy 138.209394 81.379179) (xy 138.21122 81.374772) (xy 138.252944 81.274038) + (xy 138.121789 81.510289) (xy 138.209394 81.379179) (xy 138.21122 81.374772) (xy 138.241984 81.300499) (xy 138.269737 81.233497) (xy 138.3005 81.078842) (xy 138.3005 80.921158) (xy 138.3005 80.921155) (xy 138.300499 80.921153) (xy 138.290271 80.869735) (xy 138.269737 80.766503) (xy 138.245892 80.708935) (xy 138.209397 80.620827) (xy 138.20939 80.620814) (xy 138.121789 80.489711) (xy 138.121786 80.489707) @@ -42557,7 +43306,7 @@ (xy 145.421158 81.3005) (xy 145.578844 81.3005) (xy 145.578845 81.300499) (xy 145.733497 81.269737) (xy 145.879179 81.209394) (xy 146.010289 81.121789) (xy 146.121789 81.010289) (xy 146.209394 80.879179) (xy 146.269737 80.733497) (xy 146.3005 80.578842) (xy 146.3005 80.421158) (xy 146.3005 80.421155) - (xy 146.300499 80.421153) (xy 146.287807 80.357345) (xy 146.269737 80.266503) (xy 146.256206 80.233836) + (xy 146.300499 80.421153) (xy 146.283063 80.333497) (xy 146.269737 80.266503) (xy 146.256206 80.233836) (xy 146.209397 80.120827) (xy 146.20939 80.120814) (xy 146.121789 79.989711) (xy 146.121786 79.989707) (xy 146.010292 79.878213) (xy 146.010288 79.87821) (xy 145.879185 79.790609) (xy 145.879176 79.790604) (xy 145.760127 79.741293) (xy 145.705724 79.697452) (xy 145.693019 79.674184) (xy 145.64371 79.55514) @@ -42565,42 +43314,42 @@ (xy 145.42993 79.270013) (xy 145.434914 79.200321) (xy 145.476786 79.144388) (xy 145.482178 79.140571) (xy 145.510289 79.121789) (xy 145.621789 79.010289) (xy 145.709394 78.879179) (xy 145.769737 78.733497) (xy 145.8005 78.578842) (xy 145.8005 78.421158) (xy 145.8005 78.421155) (xy 145.800499 78.421153) - (xy 145.786649 78.351524) (xy 145.769737 78.266503) (xy 145.731842 78.175016) (xy 145.709397 78.120827) + (xy 145.774353 78.289711) (xy 145.769737 78.266503) (xy 145.741055 78.197257) (xy 145.709397 78.120827) (xy 145.70939 78.120814) (xy 145.621789 77.989711) (xy 145.621786 77.989707) (xy 145.510292 77.878213) (xy 145.510284 77.878207) (xy 145.472712 77.853102) (xy 145.454102 77.830834) (xy 145.433369 77.810512) (xy 145.431962 77.804343) (xy 145.427906 77.79949) (xy 145.424288 77.77069) (xy 145.417836 77.742391) (xy 145.419987 77.736441) (xy 145.419199 77.730165) (xy 145.431725 77.703982) (xy 145.441597 77.676685) (xy 145.447479 77.671053) (xy 145.449353 77.667138) (xy 145.466303 77.651481) (xy 145.469438 77.649084) (xy 145.510289 77.621789) (xy 145.621789 77.510289) (xy 145.709394 77.379179) (xy 145.769737 77.233497) - (xy 145.788648 77.138428) (xy 149.4 77.138428) (xy 149.4 77.25) (xy 150.21967 77.25) (xy 150.199925 77.269745) - (xy 150.150556 77.355255) (xy 150.125 77.45063) (xy 150.125 77.54937) (xy 150.150556 77.644745) - (xy 150.199925 77.730255) (xy 150.21967 77.75) (xy 149.4 77.75) (xy 149.4 77.861571) (xy 149.427085 78.032584) - (xy 149.480591 78.197257) (xy 149.559195 78.351524) (xy 149.660967 78.491602) (xy 149.783397 78.614032) - (xy 149.923475 78.715804) (xy 150.077744 78.794408) (xy 150.242415 78.847914) (xy 150.242414 78.847914) - (xy 150.249999 78.849115) (xy 150.25 78.849114) (xy 150.25 77.78033) (xy 150.269745 77.800075) (xy 150.355255 77.849444) - (xy 150.45063 77.875) (xy 150.54937 77.875) (xy 150.644745 77.849444) (xy 150.730255 77.800075) - (xy 150.75 77.78033) (xy 150.75 78.849115) (xy 150.757584 78.847914) (xy 150.922255 78.794408) (xy 151.076524 78.715804) - (xy 151.216598 78.614035) (xy 151.324199 78.506434) (xy 151.385522 78.472949) (xy 151.455214 78.477933) - (xy 151.511148 78.519804) (xy 151.51742 78.529019) (xy 151.54815 78.578842) (xy 151.557288 78.593656) - (xy 151.681344 78.717712) (xy 151.830666 78.809814) (xy 151.997203 78.864999) (xy 152.099991 78.8755) - (xy 152.900008 78.875499) (xy 152.900016 78.875498) (xy 152.900019 78.875498) (xy 152.956302 78.869748) - (xy 153.002797 78.864999) (xy 153.169334 78.809814) (xy 153.318656 78.717712) (xy 153.442712 78.593656) - (xy 153.534814 78.444334) (xy 153.589999 78.277797) (xy 153.6005 78.175009) (xy 153.600499 76.824992) - (xy 153.589999 76.722203) (xy 153.534814 76.555666) (xy 153.442712 76.406344) (xy 153.318656 76.282288) - (xy 153.19431 76.205591) (xy 153.169336 76.190187) (xy 153.169331 76.190185) (xy 153.139382 76.180261) - (xy 153.002797 76.135001) (xy 153.002795 76.135) (xy 152.90001 76.1245) (xy 152.099998 76.1245) - (xy 152.09998 76.124501) (xy 151.997203 76.135) (xy 151.9972 76.135001) (xy 151.830668 76.190185) - (xy 151.830663 76.190187) (xy 151.681342 76.282289) (xy 151.557289 76.406342) (xy 151.51742 76.470981) - (xy 151.465472 76.517705) (xy 151.396509 76.528928) (xy 151.332427 76.501084) (xy 151.3242 76.493565) - (xy 151.216602 76.385967) (xy 151.076524 76.284195) (xy 150.922257 76.205591) (xy 150.757589 76.152087) - (xy 150.757581 76.152085) (xy 150.75 76.150884) (xy 150.75 77.21967) (xy 150.730255 77.199925) (xy 150.644745 77.150556) - (xy 150.54937 77.125) (xy 150.45063 77.125) (xy 150.355255 77.150556) (xy 150.269745 77.199925) - (xy 150.25 77.21967) (xy 150.25 76.150884) (xy 150.249999 76.150884) (xy 150.242418 76.152085) (xy 150.24241 76.152087) - (xy 150.077742 76.205591) (xy 149.923475 76.284195) (xy 149.783397 76.385967) (xy 149.660967 76.508397) - (xy 149.559195 76.648475) (xy 149.480591 76.802742) (xy 149.427085 76.967415) (xy 149.4 77.138428) - (xy 145.788648 77.138428) (xy 145.791319 77.125) (xy 145.794429 77.109365) (xy 145.794429 77.109364) - (xy 145.8005 77.078844) (xy 145.8005 76.921155) (xy 145.800499 76.921153) (xy 145.79215 76.879179) - (xy 145.769737 76.766503) (xy 145.753782 76.727984) (xy 145.709397 76.620827) (xy 145.70939 76.620814) + (xy 145.786246 77.1505) (xy 145.788647 77.138428) (xy 149.4 77.138428) (xy 149.4 77.25) (xy 150.21967 77.25) + (xy 150.199925 77.269745) (xy 150.150556 77.355255) (xy 150.125 77.45063) (xy 150.125 77.54937) + (xy 150.150556 77.644745) (xy 150.199925 77.730255) (xy 150.21967 77.75) (xy 149.4 77.75) (xy 149.4 77.861571) + (xy 149.427085 78.032584) (xy 149.480591 78.197257) (xy 149.559195 78.351524) (xy 149.660967 78.491602) + (xy 149.783397 78.614032) (xy 149.923475 78.715804) (xy 150.077744 78.794408) (xy 150.242415 78.847914) + (xy 150.242414 78.847914) (xy 150.249999 78.849115) (xy 150.25 78.849114) (xy 150.25 77.78033) (xy 150.269745 77.800075) + (xy 150.355255 77.849444) (xy 150.45063 77.875) (xy 150.54937 77.875) (xy 150.644745 77.849444) + (xy 150.730255 77.800075) (xy 150.75 77.78033) (xy 150.75 78.849115) (xy 150.757584 78.847914) (xy 150.922255 78.794408) + (xy 151.076524 78.715804) (xy 151.216598 78.614035) (xy 151.324199 78.506434) (xy 151.385522 78.472949) + (xy 151.455214 78.477933) (xy 151.511148 78.519804) (xy 151.51742 78.529019) (xy 151.54815 78.578842) + (xy 151.557288 78.593656) (xy 151.681344 78.717712) (xy 151.830666 78.809814) (xy 151.997203 78.864999) + (xy 152.099991 78.8755) (xy 152.900008 78.875499) (xy 152.900016 78.875498) (xy 152.900019 78.875498) + (xy 152.956302 78.869748) (xy 153.002797 78.864999) (xy 153.169334 78.809814) (xy 153.318656 78.717712) + (xy 153.442712 78.593656) (xy 153.534814 78.444334) (xy 153.589999 78.277797) (xy 153.6005 78.175009) + (xy 153.600499 76.824992) (xy 153.589999 76.722203) (xy 153.534814 76.555666) (xy 153.442712 76.406344) + (xy 153.318656 76.282288) (xy 153.188781 76.202181) (xy 153.169336 76.190187) (xy 153.169331 76.190185) + (xy 153.167862 76.189698) (xy 153.002797 76.135001) (xy 153.002795 76.135) (xy 152.90001 76.1245) + (xy 152.099998 76.1245) (xy 152.09998 76.124501) (xy 151.997203 76.135) (xy 151.9972 76.135001) + (xy 151.830668 76.190185) (xy 151.830663 76.190187) (xy 151.681342 76.282289) (xy 151.557289 76.406342) + (xy 151.51742 76.470981) (xy 151.465472 76.517705) (xy 151.396509 76.528928) (xy 151.332427 76.501084) + (xy 151.3242 76.493565) (xy 151.216602 76.385967) (xy 151.076524 76.284195) (xy 150.922257 76.205591) + (xy 150.757589 76.152087) (xy 150.757581 76.152085) (xy 150.75 76.150884) (xy 150.75 77.21967) (xy 150.730255 77.199925) + (xy 150.644745 77.150556) (xy 150.54937 77.125) (xy 150.45063 77.125) (xy 150.355255 77.150556) + (xy 150.269745 77.199925) (xy 150.25 77.21967) (xy 150.25 76.150884) (xy 150.249999 76.150884) (xy 150.242418 76.152085) + (xy 150.24241 76.152087) (xy 150.077742 76.205591) (xy 149.923475 76.284195) (xy 149.783397 76.385967) + (xy 149.660967 76.508397) (xy 149.559195 76.648475) (xy 149.480591 76.802742) (xy 149.427085 76.967415) + (xy 149.4 77.138428) (xy 145.788647 77.138428) (xy 145.794429 77.109365) (xy 145.794429 77.109364) + (xy 145.8005 77.078844) (xy 145.8005 76.921155) (xy 145.800499 76.921153) (xy 145.781369 76.824981) + (xy 145.769737 76.766503) (xy 145.756062 76.733489) (xy 145.709397 76.620827) (xy 145.70939 76.620814) (xy 145.621789 76.489711) (xy 145.621786 76.489707) (xy 145.510292 76.378213) (xy 145.510288 76.37821) (xy 145.379185 76.290609) (xy 145.379172 76.290602) (xy 145.233501 76.230264) (xy 145.233489 76.230261) (xy 145.078845 76.1995) (xy 145.078842 76.1995) (xy 144.921158 76.1995) (xy 144.921155 76.1995) @@ -42649,158 +43398,127 @@ (xy 134.420827 80.043585) (xy 134.420816 80.043591) (xy 134.309918 80.117691) (xy 134.243241 80.138568) (xy 134.175861 80.120083) (xy 134.129171 80.068104) (xy 134.126473 80.062054) (xy 134.109394 80.020821) (xy 134.109392 80.020818) (xy 134.10939 80.020814) (xy 134.021789 79.889711) (xy 134.021786 79.889707) - (xy 133.910292 79.778213) (xy 133.910288 79.77821) (xy 133.779185 79.690609) (xy 133.779172 79.690602) - (xy 133.633501 79.630264) (xy 133.633489 79.630261) (xy 133.478845 79.5995) (xy 133.478842 79.5995) - (xy 133.321158 79.5995) (xy 133.321155 79.5995) (xy 133.16651 79.630261) (xy 133.166498 79.630264) - (xy 133.020827 79.690602) (xy 133.020814 79.690609) (xy 132.889711 79.77821) (xy 132.889707 79.778213) - (xy 132.778213 79.889707) (xy 132.77821 79.889711) (xy 132.690609 80.020814) (xy 132.690602 80.020827) - (xy 132.630264 80.166498) (xy 132.630261 80.16651) (xy 132.5995 80.321153) (xy 124.584602 80.321153) - (xy 124.442656 80.179207) (xy 124.442654 80.179205) (xy 124.442649 80.179201) (xy 124.238848 80.031132) - (xy 124.238847 80.031131) (xy 124.238845 80.03113) (xy 124.157548 79.989707) (xy 124.014383 79.91676) - (xy 123.774785 79.83891) (xy 123.666669 79.821786) (xy 123.525962 79.7995) (xy 123.274038 79.7995) - (xy 123.149626 79.819205) (xy 123.025214 79.83891) (xy 122.785616 79.91676) (xy 122.561151 80.031132) - (xy 122.35735 80.179201) (xy 122.357345 80.179205) (xy 122.179205 80.357345) (xy 122.179201 80.35735) - (xy 122.031132 80.561151) (xy 121.91676 80.785616) (xy 121.83891 81.025214) (xy 121.811147 81.2005) - (xy 121.7995 81.274038) (xy 120.2505 81.274038) (xy 120.2505 77.921153) (xy 125.3995 77.921153) - (xy 125.3995 78.078846) (xy 125.430261 78.233489) (xy 125.430264 78.233501) (xy 125.490602 78.379172) - (xy 125.490609 78.379185) (xy 125.57821 78.510288) (xy 125.578213 78.510292) (xy 125.689707 78.621786) - (xy 125.689711 78.621789) (xy 125.820814 78.70939) (xy 125.820827 78.709397) (xy 125.966498 78.769735) - (xy 125.966503 78.769737) (xy 126.090532 78.794408) (xy 126.121153 78.800499) (xy 126.121156 78.8005) - (xy 126.121158 78.8005) (xy 126.278844 78.8005) (xy 126.278845 78.800499) (xy 126.433497 78.769737) - (xy 126.546166 78.723067) (xy 126.579172 78.709397) (xy 126.579172 78.709396) (xy 126.579179 78.709394) - (xy 126.710289 78.621789) (xy 126.821789 78.510289) (xy 126.909394 78.379179) (xy 126.969737 78.233497) - (xy 127.0005 78.078842) (xy 127.0005 77.921158) (xy 127.0005 77.921155) (xy 127.000499 77.921153) - (xy 126.991956 77.878207) (xy 126.969737 77.766503) (xy 126.969735 77.766498) (xy 126.909397 77.620827) - (xy 126.90939 77.620814) (xy 126.821789 77.489711) (xy 126.821786 77.489707) (xy 126.710292 77.378213) - (xy 126.710288 77.37821) (xy 126.579185 77.290609) (xy 126.579172 77.290602) (xy 126.433501 77.230264) - (xy 126.433489 77.230261) (xy 126.278845 77.1995) (xy 126.278842 77.1995) (xy 126.121158 77.1995) - (xy 126.121155 77.1995) (xy 125.96651 77.230261) (xy 125.966498 77.230264) (xy 125.820827 77.290602) - (xy 125.820814 77.290609) (xy 125.689711 77.37821) (xy 125.689707 77.378213) (xy 125.578213 77.489707) - (xy 125.57821 77.489711) (xy 125.490609 77.620814) (xy 125.490602 77.620827) (xy 125.430264 77.766498) - (xy 125.430261 77.76651) (xy 125.3995 77.921153) (xy 120.2505 77.921153) (xy 120.2505 74.921153) - (xy 126.3995 74.921153) (xy 126.3995 75.078846) (xy 126.430261 75.233489) (xy 126.430264 75.233501) - (xy 126.490602 75.379172) (xy 126.490609 75.379185) (xy 126.57821 75.510288) (xy 126.578213 75.510292) - (xy 126.689707 75.621786) (xy 126.689711 75.621789) (xy 126.820814 75.70939) (xy 126.820827 75.709397) - (xy 126.966498 75.769735) (xy 126.966503 75.769737) (xy 127.121153 75.800499) (xy 127.121156 75.8005) - (xy 127.121158 75.8005) (xy 127.175162 75.8005) (xy 127.242201 75.820185) (xy 127.287956 75.872989) - (xy 127.289715 75.877029) (xy 127.290606 75.879179) (xy 127.290607 75.87918) (xy 127.290609 75.879185) - (xy 127.325304 75.931109) (xy 127.346182 75.997786) (xy 127.327698 76.065167) (xy 127.325304 76.068891) - (xy 127.290609 76.120814) (xy 127.290602 76.120827) (xy 127.230264 76.266498) (xy 127.230261 76.26651) - (xy 127.1995 76.421153) (xy 127.1995 76.578846) (xy 127.230261 76.733489) (xy 127.230264 76.733501) - (xy 127.290602 76.879172) (xy 127.290609 76.879185) (xy 127.37821 77.010288) (xy 127.378213 77.010292) - (xy 127.489707 77.121786) (xy 127.489711 77.121789) (xy 127.620814 77.20939) (xy 127.620827 77.209397) - (xy 127.718853 77.25) (xy 127.766503 77.269737) (xy 127.921153 77.300499) (xy 127.921156 77.3005) - (xy 127.921158 77.3005) (xy 128.078844 77.3005) (xy 128.078845 77.300499) (xy 128.233497 77.269737) - (xy 128.379179 77.209394) (xy 128.510289 77.121789) (xy 128.621789 77.010289) (xy 128.709394 76.879179) - (xy 128.709395 76.879176) (xy 128.709397 76.879173) (xy 128.712719 76.871153) (xy 130.0995 76.871153) - (xy 130.0995 77.028846) (xy 130.130261 77.183489) (xy 130.130264 77.183501) (xy 130.190602 77.329172) - (xy 130.190609 77.329185) (xy 130.27821 77.460288) (xy 130.278213 77.460292) (xy 130.389707 77.571786) - (xy 130.389711 77.571789) (xy 130.520814 77.65939) (xy 130.520827 77.659397) (xy 130.666498 77.719735) - (xy 130.666503 77.719737) (xy 130.780392 77.742391) (xy 130.821153 77.750499) (xy 130.821156 77.7505) - (xy 130.821158 77.7505) (xy 130.978844 77.7505) (xy 130.978845 77.750499) (xy 131.133497 77.719737) - (xy 131.246166 77.673067) (xy 131.279172 77.659397) (xy 131.279172 77.659396) (xy 131.279179 77.659394) - (xy 131.410289 77.571789) (xy 131.521789 77.460289) (xy 131.609394 77.329179) (xy 131.669737 77.183497) - (xy 131.7005 77.028842) (xy 131.7005 76.871158) (xy 131.7005 76.871155) (xy 131.700499 76.871153) - (xy 131.685839 76.797453) (xy 131.669737 76.716503) (xy 131.630102 76.620814) (xy 131.609397 76.570827) - (xy 131.60939 76.570814) (xy 131.521789 76.439711) (xy 131.521786 76.439707) (xy 131.410292 76.328213) - (xy 131.410288 76.32821) (xy 131.324897 76.271153) (xy 132.5495 76.271153) (xy 132.5495 76.428846) - (xy 132.580261 76.583489) (xy 132.580264 76.583501) (xy 132.629575 76.702549) (xy 132.637044 76.772018) - (xy 132.629575 76.797453) (xy 132.580264 76.916501) (xy 132.580261 76.916513) (xy 132.5495 77.071156) - (xy 132.5495 77.228849) (xy 132.580261 77.383492) (xy 132.580264 77.383504) (xy 132.640602 77.529175) - (xy 132.640609 77.529188) (xy 132.72821 77.660291) (xy 132.728213 77.660295) (xy 132.839707 77.771789) - (xy 132.839711 77.771792) (xy 132.970814 77.859393) (xy 132.970827 77.8594) (xy 133.116498 77.919738) - (xy 133.116503 77.91974) (xy 133.271153 77.950502) (xy 133.271156 77.950503) (xy 133.271158 77.950503) - (xy 133.428844 77.950503) (xy 133.428845 77.950502) (xy 133.583497 77.91974) (xy 133.696166 77.87307) - (xy 133.729172 77.8594) (xy 133.729172 77.859399) (xy 133.729179 77.859397) (xy 133.860289 77.771792) - (xy 133.971789 77.660292) (xy 134.059394 77.529182) (xy 134.119737 77.3835) (xy 134.1505 77.228845) - (xy 134.1505 77.071161) (xy 134.1505 77.071158) (xy 134.150499 77.071156) (xy 134.142083 77.028846) - (xy 134.119737 76.916506) (xy 134.070423 76.797452) (xy 134.062955 76.727984) (xy 134.070424 76.702549) - (xy 134.119737 76.583497) (xy 134.1505 76.428842) (xy 134.1505 76.271158) (xy 134.1505 76.271155) - (xy 134.150499 76.271153) (xy 134.134394 76.190187) (xy 134.119737 76.116503) (xy 134.072398 76.002215) - (xy 134.059397 75.970827) (xy 134.05939 75.970814) (xy 133.971789 75.839711) (xy 133.971786 75.839707) - (xy 133.860292 75.728213) (xy 133.860288 75.72821) (xy 133.729185 75.640609) (xy 133.729172 75.640602) - (xy 133.583501 75.580264) (xy 133.583489 75.580261) (xy 133.428845 75.5495) (xy 133.428842 75.5495) - (xy 133.271158 75.5495) (xy 133.271155 75.5495) (xy 133.11651 75.580261) (xy 133.116498 75.580264) - (xy 132.970827 75.640602) (xy 132.970814 75.640609) (xy 132.839711 75.72821) (xy 132.839707 75.728213) - (xy 132.728213 75.839707) (xy 132.72821 75.839711) (xy 132.640609 75.970814) (xy 132.640602 75.970827) - (xy 132.580264 76.116498) (xy 132.580261 76.11651) (xy 132.5495 76.271153) (xy 131.324897 76.271153) - (xy 131.279185 76.240609) (xy 131.279172 76.240602) (xy 131.133501 76.180264) (xy 131.133489 76.180261) - (xy 130.978845 76.1495) (xy 130.978842 76.1495) (xy 130.821158 76.1495) (xy 130.821155 76.1495) - (xy 130.66651 76.180261) (xy 130.666498 76.180264) (xy 130.520827 76.240602) (xy 130.520814 76.240609) - (xy 130.389711 76.32821) (xy 130.389707 76.328213) (xy 130.278213 76.439707) (xy 130.27821 76.439711) - (xy 130.190609 76.570814) (xy 130.190602 76.570827) (xy 130.130264 76.716498) (xy 130.130261 76.71651) - (xy 130.0995 76.871153) (xy 128.712719 76.871153) (xy 128.734895 76.817614) (xy 128.734895 76.817613) - (xy 128.743245 76.797454) (xy 128.769737 76.733497) (xy 128.8005 76.578842) (xy 128.8005 76.421158) - (xy 128.8005 76.421155) (xy 128.800499 76.421153) (xy 128.782012 76.328213) (xy 128.769737 76.266503) - (xy 128.763108 76.250499) (xy 128.709396 76.120825) (xy 128.709394 76.120822) (xy 128.709394 76.120821) - (xy 128.674694 76.068889) (xy 128.653816 76.002215) (xy 128.6723 75.934835) (xy 128.674676 75.931136) - (xy 128.709394 75.879179) (xy 128.769737 75.733497) (xy 128.8005 75.578842) (xy 128.8005 75.421158) - (xy 128.8005 75.421155) (xy 128.794155 75.389258) (xy 128.794155 75.389257) (xy 128.790554 75.371153) - (xy 139.1995 75.371153) (xy 139.1995 75.528846) (xy 139.230261 75.683489) (xy 139.230264 75.683501) - (xy 139.290602 75.829172) (xy 139.290609 75.829185) (xy 139.37821 75.960288) (xy 139.378213 75.960292) - (xy 139.489707 76.071786) (xy 139.489711 76.071789) (xy 139.620814 76.15939) (xy 139.620827 76.159397) - (xy 139.695162 76.190187) (xy 139.766503 76.219737) (xy 139.921153 76.250499) (xy 139.921156 76.2505) - (xy 139.921158 76.2505) (xy 140.078844 76.2505) (xy 140.078845 76.250499) (xy 140.233497 76.219737) - (xy 140.379179 76.159394) (xy 140.510289 76.071789) (xy 140.621789 75.960289) (xy 140.709394 75.829179) - (xy 140.769737 75.683497) (xy 140.8005 75.528842) (xy 140.8005 75.371158) (xy 140.8005 75.371155) - (xy 140.800499 75.371153) (xy 140.779684 75.26651) (xy 140.769737 75.216503) (xy 140.730102 75.120814) - (xy 140.709397 75.070827) (xy 140.70939 75.070814) (xy 140.621789 74.939711) (xy 140.621786 74.939707) - (xy 140.510292 74.828213) (xy 140.510288 74.82821) (xy 140.379185 74.740609) (xy 140.379172 74.740602) - (xy 140.233501 74.680264) (xy 140.233489 74.680261) (xy 140.078845 74.6495) (xy 140.078842 74.6495) - (xy 139.921158 74.6495) (xy 139.921155 74.6495) (xy 139.76651 74.680261) (xy 139.766498 74.680264) - (xy 139.620827 74.740602) (xy 139.620814 74.740609) (xy 139.489711 74.82821) (xy 139.489707 74.828213) - (xy 139.378213 74.939707) (xy 139.37821 74.939711) (xy 139.290609 75.070814) (xy 139.290602 75.070827) - (xy 139.230264 75.216498) (xy 139.230261 75.21651) (xy 139.1995 75.371153) (xy 128.790554 75.371153) - (xy 128.769738 75.26651) (xy 128.769737 75.266503) (xy 128.756062 75.233489) (xy 128.709397 75.120827) - (xy 128.70939 75.120814) (xy 128.621789 74.989711) (xy 128.621786 74.989707) (xy 128.510292 74.878213) - (xy 128.510288 74.87821) (xy 128.379185 74.790609) (xy 128.379172 74.790602) (xy 128.233501 74.730264) - (xy 128.233489 74.730261) (xy 128.078845 74.6995) (xy 128.078842 74.6995) (xy 128.024838 74.6995) - (xy 127.957799 74.679815) (xy 127.912044 74.627011) (xy 127.910275 74.622949) (xy 127.909394 74.620821) - (xy 127.909391 74.620816) (xy 127.90939 74.620814) (xy 127.821789 74.489711) (xy 127.821786 74.489707) - (xy 127.710292 74.378213) (xy 127.710288 74.37821) (xy 127.579185 74.290609) (xy 127.579172 74.290602) - (xy 127.433501 74.230264) (xy 127.433489 74.230261) (xy 127.278845 74.1995) (xy 127.278842 74.1995) - (xy 127.121158 74.1995) (xy 127.121155 74.1995) (xy 126.96651 74.230261) (xy 126.966498 74.230264) - (xy 126.820827 74.290602) (xy 126.820814 74.290609) (xy 126.689711 74.37821) (xy 126.689707 74.378213) - (xy 126.578213 74.489707) (xy 126.57821 74.489711) (xy 126.490609 74.620814) (xy 126.490602 74.620827) - (xy 126.430264 74.766498) (xy 126.430261 74.76651) (xy 126.3995 74.921153) (xy 120.2505 74.921153) - (xy 120.2505 73.821153) (xy 130.4495 73.821153) (xy 130.4495 73.978846) (xy 130.480261 74.133489) + (xy 133.910292 79.778213) (xy 133.910288 79.77821) (xy 133.774114 79.687221) (xy 133.77548 79.685175) + (xy 133.733347 79.6438) (xy 133.717876 79.575665) (xy 133.741697 79.509981) (xy 133.772744 79.480285) + (xy 133.795535 79.465055) (xy 133.860289 79.421789) (xy 133.971789 79.310289) (xy 134.059394 79.179179) + (xy 134.065558 79.164299) (xy 134.075394 79.140551) (xy 134.119737 79.033497) (xy 134.1505 78.878842) + (xy 134.1505 78.721158) (xy 134.1505 78.721155) (xy 134.150499 78.721153) (xy 134.132419 78.630261) + (xy 134.119737 78.566503) (xy 134.094856 78.506434) (xy 134.059397 78.420827) (xy 134.05939 78.420814) + (xy 133.971789 78.289711) (xy 133.971786 78.289707) (xy 133.860292 78.178213) (xy 133.860288 78.17821) + (xy 133.729185 78.090609) (xy 133.729172 78.090602) (xy 133.583501 78.030264) (xy 133.583489 78.030261) + (xy 133.428845 77.9995) (xy 133.428842 77.9995) (xy 133.271158 77.9995) (xy 133.271155 77.9995) + (xy 133.11651 78.030261) (xy 133.116498 78.030264) (xy 132.970827 78.090602) (xy 132.970814 78.090609) + (xy 132.839711 78.17821) (xy 132.839707 78.178213) (xy 132.728213 78.289707) (xy 132.72821 78.289711) + (xy 132.640609 78.420814) (xy 132.640602 78.420827) (xy 132.580264 78.566498) (xy 132.580261 78.56651) + (xy 132.5495 78.721153) (xy 120.2505 78.721153) (xy 120.2505 76.821153) (xy 125.8995 76.821153) + (xy 125.8995 76.978846) (xy 125.930261 77.133489) (xy 125.930264 77.133501) (xy 125.990602 77.279172) + (xy 125.990609 77.279185) (xy 126.07821 77.410288) (xy 126.078213 77.410292) (xy 126.189707 77.521786) + (xy 126.189711 77.521789) (xy 126.320814 77.60939) (xy 126.320827 77.609397) (xy 126.460228 77.667138) + (xy 126.466503 77.669737) (xy 126.621153 77.700499) (xy 126.621156 77.7005) (xy 126.621158 77.7005) + (xy 126.778844 77.7005) (xy 126.778845 77.700499) (xy 126.933497 77.669737) (xy 127.079179 77.609394) + (xy 127.210289 77.521789) (xy 127.321789 77.410289) (xy 127.409394 77.279179) (xy 127.420043 77.253468) + (xy 127.463884 77.199065) (xy 127.530178 77.176999) (xy 127.597877 77.194277) (xy 127.603497 77.197819) + (xy 127.620813 77.209389) (xy 127.620815 77.20939) (xy 127.620821 77.209394) (xy 127.620823 77.209395) + (xy 127.620827 77.209397) (xy 127.718853 77.25) (xy 127.766503 77.269737) (xy 127.921153 77.300499) + (xy 127.921156 77.3005) (xy 127.921158 77.3005) (xy 128.078844 77.3005) (xy 128.078845 77.300499) + (xy 128.233497 77.269737) (xy 128.379179 77.209394) (xy 128.510289 77.121789) (xy 128.510925 77.121153) + (xy 130.1495 77.121153) (xy 130.1495 77.278846) (xy 130.180261 77.433489) (xy 130.180264 77.433501) + (xy 130.240602 77.579172) (xy 130.240609 77.579185) (xy 130.32821 77.710288) (xy 130.328213 77.710292) + (xy 130.439707 77.821786) (xy 130.439711 77.821789) (xy 130.570814 77.90939) (xy 130.570827 77.909397) + (xy 130.716498 77.969735) (xy 130.716503 77.969737) (xy 130.866131 77.9995) (xy 130.871153 78.000499) + (xy 130.871156 78.0005) (xy 130.871158 78.0005) (xy 131.028844 78.0005) (xy 131.028845 78.000499) + (xy 131.183497 77.969737) (xy 131.329179 77.909394) (xy 131.460289 77.821789) (xy 131.571789 77.710289) + (xy 131.659394 77.579179) (xy 131.719737 77.433497) (xy 131.7505 77.278842) (xy 131.7505 77.121158) + (xy 131.7505 77.121155) (xy 131.750499 77.121153) (xy 131.747698 77.107071) (xy 131.719737 76.966503) + (xy 131.700955 76.921158) (xy 131.659397 76.820827) (xy 131.65939 76.820814) (xy 131.571789 76.689711) + (xy 131.571786 76.689707) (xy 131.460292 76.578213) (xy 131.460288 76.57821) (xy 131.329185 76.490609) + (xy 131.329172 76.490602) (xy 131.183501 76.430264) (xy 131.183489 76.430261) (xy 131.028845 76.3995) + (xy 131.028842 76.3995) (xy 130.871158 76.3995) (xy 130.871155 76.3995) (xy 130.71651 76.430261) + (xy 130.716498 76.430264) (xy 130.570827 76.490602) (xy 130.570814 76.490609) (xy 130.439711 76.57821) + (xy 130.439707 76.578213) (xy 130.328213 76.689707) (xy 130.32821 76.689711) (xy 130.240609 76.820814) + (xy 130.240602 76.820827) (xy 130.180264 76.966498) (xy 130.180261 76.96651) (xy 130.1495 77.121153) + (xy 128.510925 77.121153) (xy 128.553236 77.078842) (xy 128.604694 77.027385) (xy 128.621786 77.010292) + (xy 128.621789 77.010289) (xy 128.709394 76.879179) (xy 128.769737 76.733497) (xy 128.8005 76.578842) + (xy 128.8005 76.421158) (xy 128.8005 76.421155) (xy 128.800499 76.421153) (xy 128.774264 76.289257) + (xy 128.770662 76.271153) (xy 132.5495 76.271153) (xy 132.5495 76.428846) (xy 132.580261 76.583489) + (xy 132.580264 76.583501) (xy 132.640602 76.729172) (xy 132.640609 76.729185) (xy 132.72821 76.860288) + (xy 132.728213 76.860292) (xy 132.839707 76.971786) (xy 132.839711 76.971789) (xy 132.970814 77.05939) + (xy 132.970827 77.059397) (xy 133.116498 77.119735) (xy 133.116503 77.119737) (xy 133.271153 77.150499) + (xy 133.271156 77.1505) (xy 133.271158 77.1505) (xy 133.428844 77.1505) (xy 133.428845 77.150499) + (xy 133.583497 77.119737) (xy 133.729179 77.059394) (xy 133.860289 76.971789) (xy 133.971789 76.860289) + (xy 134.059394 76.729179) (xy 134.119737 76.583497) (xy 134.1505 76.428842) (xy 134.1505 76.271158) + (xy 134.1505 76.271155) (xy 134.150499 76.271153) (xy 134.137458 76.205591) (xy 134.119737 76.116503) + (xy 134.072398 76.002215) (xy 134.059397 75.970827) (xy 134.05939 75.970814) (xy 133.971789 75.839711) + (xy 133.971786 75.839707) (xy 133.860292 75.728213) (xy 133.860288 75.72821) (xy 133.729185 75.640609) + (xy 133.729172 75.640602) (xy 133.583501 75.580264) (xy 133.583489 75.580261) (xy 133.428845 75.5495) + (xy 133.428842 75.5495) (xy 133.271158 75.5495) (xy 133.271155 75.5495) (xy 133.11651 75.580261) + (xy 133.116498 75.580264) (xy 132.970827 75.640602) (xy 132.970814 75.640609) (xy 132.839711 75.72821) + (xy 132.839707 75.728213) (xy 132.728213 75.839707) (xy 132.72821 75.839711) (xy 132.640609 75.970814) + (xy 132.640602 75.970827) (xy 132.580264 76.116498) (xy 132.580261 76.11651) (xy 132.5495 76.271153) + (xy 128.770662 76.271153) (xy 128.769738 76.266507) (xy 128.769735 76.266498) (xy 128.709396 76.120825) + (xy 128.709394 76.120822) (xy 128.709394 76.120821) (xy 128.674694 76.068889) (xy 128.653816 76.002215) + (xy 128.6723 75.934835) (xy 128.674676 75.931136) (xy 128.709394 75.879179) (xy 128.769737 75.733497) + (xy 128.8005 75.578842) (xy 128.8005 75.421158) (xy 128.8005 75.421155) (xy 128.794155 75.389258) + (xy 128.794155 75.389257) (xy 128.790554 75.371153) (xy 139.1995 75.371153) (xy 139.1995 75.528846) + (xy 139.230261 75.683489) (xy 139.230264 75.683501) (xy 139.290602 75.829172) (xy 139.290609 75.829185) + (xy 139.37821 75.960288) (xy 139.378213 75.960292) (xy 139.489707 76.071786) (xy 139.489711 76.071789) + (xy 139.620814 76.15939) (xy 139.620827 76.159397) (xy 139.732351 76.205591) (xy 139.766503 76.219737) + (xy 139.921153 76.250499) (xy 139.921156 76.2505) (xy 139.921158 76.2505) (xy 140.078844 76.2505) + (xy 140.078845 76.250499) (xy 140.233497 76.219737) (xy 140.379179 76.159394) (xy 140.510289 76.071789) + (xy 140.621789 75.960289) (xy 140.709394 75.829179) (xy 140.769737 75.683497) (xy 140.8005 75.528842) + (xy 140.8005 75.371158) (xy 140.8005 75.371155) (xy 140.800499 75.371153) (xy 140.779684 75.26651) + (xy 140.769737 75.216503) (xy 140.730105 75.120821) (xy 140.709397 75.070827) (xy 140.70939 75.070814) + (xy 140.621789 74.939711) (xy 140.621786 74.939707) (xy 140.510292 74.828213) (xy 140.510288 74.82821) + (xy 140.379185 74.740609) (xy 140.379172 74.740602) (xy 140.233501 74.680264) (xy 140.233489 74.680261) + (xy 140.078845 74.6495) (xy 140.078842 74.6495) (xy 139.921158 74.6495) (xy 139.921155 74.6495) + (xy 139.76651 74.680261) (xy 139.766498 74.680264) (xy 139.620827 74.740602) (xy 139.620814 74.740609) + (xy 139.489711 74.82821) (xy 139.489707 74.828213) (xy 139.378213 74.939707) (xy 139.37821 74.939711) + (xy 139.290609 75.070814) (xy 139.290602 75.070827) (xy 139.230264 75.216498) (xy 139.230261 75.21651) + (xy 139.1995 75.371153) (xy 128.790554 75.371153) (xy 128.769738 75.26651) (xy 128.769737 75.266503) + (xy 128.756062 75.233489) (xy 128.709397 75.120827) (xy 128.70939 75.120814) (xy 128.621789 74.989711) + (xy 128.621786 74.989707) (xy 128.510292 74.878213) (xy 128.510288 74.87821) (xy 128.379185 74.790609) + (xy 128.379173 74.790603) (xy 128.359771 74.782566) (xy 128.305368 74.738724) (xy 128.283305 74.672429) + (xy 128.300585 74.60473) (xy 128.304106 74.599143) (xy 128.333659 74.554914) (xy 128.394002 74.409232) + (xy 128.424765 74.254577) (xy 128.424765 74.096893) (xy 128.424765 74.09689) (xy 128.424764 74.096888) + (xy 128.394003 73.942245) (xy 128.394002 73.942238) (xy 128.367885 73.879185) (xy 128.360982 73.862518) + (xy 128.343848 73.821153) (xy 130.4495 73.821153) (xy 130.4495 73.978846) (xy 130.480261 74.133489) (xy 130.480264 74.133501) (xy 130.540602 74.279172) (xy 130.540609 74.279185) (xy 130.62821 74.410288) (xy 130.628213 74.410292) (xy 130.739707 74.521786) (xy 130.739711 74.521789) (xy 130.870814 74.60939) - (xy 130.870827 74.609397) (xy 131.005378 74.665129) (xy 131.016503 74.669737) (xy 131.166131 74.6995) - (xy 131.171153 74.700499) (xy 131.171156 74.7005) (xy 131.171158 74.7005) (xy 131.328844 74.7005) - (xy 131.328845 74.700499) (xy 131.483497 74.669737) (xy 131.601596 74.620819) (xy 131.629172 74.609397) - (xy 131.629172 74.609396) (xy 131.629179 74.609394) (xy 131.760289 74.521789) (xy 131.871789 74.410289) - (xy 131.959394 74.279179) (xy 132.019737 74.133497) (xy 132.0505 73.978842) (xy 132.0505 73.876888) - (xy 147.743765 73.876888) (xy 147.743765 74.034581) (xy 147.774526 74.189224) (xy 147.774529 74.189236) - (xy 147.834867 74.334907) (xy 147.834874 74.33492) (xy 147.922475 74.466023) (xy 147.922478 74.466027) - (xy 148.033972 74.577521) (xy 148.033976 74.577524) (xy 148.165079 74.665125) (xy 148.165092 74.665132) - (xy 148.316396 74.727803) (xy 148.315737 74.729392) (xy 148.367319 74.763184) (xy 148.395787 74.826991) - (xy 148.387461 74.891014) (xy 148.374528 74.922237) (xy 148.374526 74.922245) (xy 148.343765 75.076888) - (xy 148.343765 75.234581) (xy 148.374526 75.389224) (xy 148.374529 75.389236) (xy 148.434867 75.534907) - (xy 148.434874 75.53492) (xy 148.522475 75.666023) (xy 148.522478 75.666027) (xy 148.633972 75.777521) - (xy 148.633976 75.777524) (xy 148.765079 75.865125) (xy 148.765092 75.865132) (xy 148.910763 75.92547) - (xy 148.910768 75.925472) (xy 149.065418 75.956234) (xy 149.065421 75.956235) (xy 149.065423 75.956235) - (xy 149.223109 75.956235) (xy 149.22311 75.956234) (xy 149.377762 75.925472) (xy 149.523444 75.865129) - (xy 149.654554 75.777524) (xy 149.766054 75.666024) (xy 149.783038 75.640606) (xy 149.789413 75.631066) - (xy 149.843025 75.58626) (xy 149.91235 75.577553) (xy 149.975377 75.607707) (xy 149.980196 75.612275) - (xy 149.989707 75.621786) (xy 149.989711 75.621789) (xy 150.120814 75.70939) (xy 150.120827 75.709397) - (xy 150.266498 75.769735) (xy 150.266503 75.769737) (xy 150.421153 75.800499) (xy 150.421156 75.8005) - (xy 150.421158 75.8005) (xy 150.578844 75.8005) (xy 150.578845 75.800499) (xy 150.733497 75.769737) - (xy 150.879179 75.709394) (xy 151.010289 75.621789) (xy 151.121789 75.510289) (xy 151.209394 75.379179) - (xy 151.212719 75.371153) (xy 151.223067 75.346166) (xy 151.269737 75.233497) (xy 151.3005 75.078842) - (xy 151.3005 74.921158) (xy 151.3005 74.921155) (xy 151.300499 74.921153) (xy 151.282012 74.828213) - (xy 151.269737 74.766503) (xy 151.264249 74.753254) (xy 151.209397 74.620827) (xy 151.20939 74.620814) - (xy 151.121789 74.489711) (xy 151.121786 74.489707) (xy 151.010292 74.378213) (xy 151.010288 74.37821) - (xy 150.879185 74.290609) (xy 150.879172 74.290602) (xy 150.733501 74.230264) (xy 150.733489 74.230261) - (xy 150.578845 74.1995) (xy 150.578842 74.1995) (xy 150.421158 74.1995) (xy 150.421155 74.1995) - (xy 150.26651 74.230261) (xy 150.266498 74.230264) (xy 150.120827 74.290602) (xy 150.120814 74.290609) - (xy 149.989711 74.37821) (xy 149.989707 74.378213) (xy 149.878213 74.489707) (xy 149.878208 74.489713) - (xy 149.85485 74.524671) (xy 149.801237 74.569476) (xy 149.731912 74.578182) (xy 149.668885 74.548026) - (xy 149.664065 74.543457) (xy 149.654556 74.533947) (xy 149.654553 74.533945) (xy 149.52345 74.446344) - (xy 149.523437 74.446337) (xy 149.372135 74.383667) (xy 149.37279 74.382084) (xy 149.321184 74.348254) - (xy 149.292737 74.284437) (xy 149.301069 74.220454) (xy 149.314002 74.189232) (xy 149.344765 74.034577) - (xy 149.344765 73.876893) (xy 149.344765 73.87689) (xy 149.344764 73.876888) (xy 149.314002 73.722238) - (xy 149.290914 73.666498) (xy 149.253662 73.576562) (xy 149.253655 73.576549) (xy 149.166054 73.445446) + (xy 130.870827 74.609397) (xy 131.005378 74.665129) (xy 131.016503 74.669737) (xy 131.171153 74.700499) + (xy 131.171156 74.7005) (xy 131.171158 74.7005) (xy 131.328844 74.7005) (xy 131.328845 74.700499) + (xy 131.483497 74.669737) (xy 131.601592 74.620821) (xy 131.629172 74.609397) (xy 131.629172 74.609396) + (xy 131.629179 74.609394) (xy 131.760289 74.521789) (xy 131.871789 74.410289) (xy 131.959394 74.279179) + (xy 132.019737 74.133497) (xy 132.0505 73.978842) (xy 132.0505 73.876888) (xy 147.743765 73.876888) + (xy 147.743765 74.034581) (xy 147.774526 74.189224) (xy 147.774529 74.189236) (xy 147.834867 74.334907) + (xy 147.834874 74.33492) (xy 147.922475 74.466023) (xy 147.922478 74.466027) (xy 148.033972 74.577521) + (xy 148.033976 74.577524) (xy 148.165079 74.665125) (xy 148.165092 74.665132) (xy 148.316396 74.727803) + (xy 148.315737 74.729392) (xy 148.367319 74.763184) (xy 148.395787 74.826991) (xy 148.387461 74.891014) + (xy 148.374528 74.922237) (xy 148.374526 74.922245) (xy 148.343765 75.076888) (xy 148.343765 75.234581) + (xy 148.374526 75.389224) (xy 148.374529 75.389236) (xy 148.434867 75.534907) (xy 148.434874 75.53492) + (xy 148.522475 75.666023) (xy 148.522478 75.666027) (xy 148.633972 75.777521) (xy 148.633976 75.777524) + (xy 148.765079 75.865125) (xy 148.765092 75.865132) (xy 148.910763 75.92547) (xy 148.910768 75.925472) + (xy 149.065418 75.956234) (xy 149.065421 75.956235) (xy 149.065423 75.956235) (xy 149.223109 75.956235) + (xy 149.22311 75.956234) (xy 149.377762 75.925472) (xy 149.523444 75.865129) (xy 149.654554 75.777524) + (xy 149.766054 75.666024) (xy 149.783038 75.640606) (xy 149.789413 75.631066) (xy 149.843025 75.58626) + (xy 149.91235 75.577553) (xy 149.975377 75.607707) (xy 149.980196 75.612275) (xy 149.989707 75.621786) + (xy 149.989711 75.621789) (xy 150.120814 75.70939) (xy 150.120827 75.709397) (xy 150.266498 75.769735) + (xy 150.266503 75.769737) (xy 150.421153 75.800499) (xy 150.421156 75.8005) (xy 150.421158 75.8005) + (xy 150.578844 75.8005) (xy 150.578845 75.800499) (xy 150.733497 75.769737) (xy 150.879179 75.709394) + (xy 151.010289 75.621789) (xy 151.121789 75.510289) (xy 151.209394 75.379179) (xy 151.212719 75.371153) + (xy 151.223067 75.346166) (xy 151.269737 75.233497) (xy 151.3005 75.078842) (xy 151.3005 74.921158) + (xy 151.3005 74.921155) (xy 151.300499 74.921153) (xy 151.293333 74.885127) (xy 151.269737 74.766503) + (xy 151.264249 74.753254) (xy 151.209397 74.620827) (xy 151.20939 74.620814) (xy 151.121789 74.489711) + (xy 151.121786 74.489707) (xy 151.010292 74.378213) (xy 151.010288 74.37821) (xy 150.879185 74.290609) + (xy 150.879172 74.290602) (xy 150.733501 74.230264) (xy 150.733489 74.230261) (xy 150.578845 74.1995) + (xy 150.578842 74.1995) (xy 150.421158 74.1995) (xy 150.421155 74.1995) (xy 150.26651 74.230261) + (xy 150.266498 74.230264) (xy 150.120827 74.290602) (xy 150.120814 74.290609) (xy 149.989711 74.37821) + (xy 149.989707 74.378213) (xy 149.878213 74.489707) (xy 149.878208 74.489713) (xy 149.85485 74.524671) + (xy 149.801237 74.569476) (xy 149.731912 74.578182) (xy 149.668885 74.548026) (xy 149.664065 74.543457) + (xy 149.654556 74.533947) (xy 149.654553 74.533945) (xy 149.52345 74.446344) (xy 149.523437 74.446337) + (xy 149.372135 74.383667) (xy 149.37279 74.382084) (xy 149.321184 74.348254) (xy 149.292737 74.284437) + (xy 149.301069 74.220454) (xy 149.314002 74.189232) (xy 149.344765 74.034577) (xy 149.344765 73.876893) + (xy 149.344765 73.87689) (xy 149.344764 73.876888) (xy 149.341906 73.862518) (xy 149.314002 73.722238) + (xy 149.304998 73.7005) (xy 149.253662 73.576562) (xy 149.253655 73.576549) (xy 149.166054 73.445446) (xy 149.166051 73.445442) (xy 149.054557 73.333948) (xy 149.054553 73.333945) (xy 148.92345 73.246344) (xy 148.923437 73.246337) (xy 148.777766 73.185999) (xy 148.777754 73.185996) (xy 148.62311 73.155235) (xy 148.623107 73.155235) (xy 148.465423 73.155235) (xy 148.46542 73.155235) (xy 148.310775 73.185996) @@ -42808,189 +43526,210 @@ (xy 148.033972 73.333948) (xy 147.922478 73.445442) (xy 147.922475 73.445446) (xy 147.834874 73.576549) (xy 147.834867 73.576562) (xy 147.774529 73.722233) (xy 147.774526 73.722245) (xy 147.743765 73.876888) (xy 132.0505 73.876888) (xy 132.0505 73.821158) (xy 132.0505 73.821155) (xy 132.050499 73.821153) - (xy 132.019738 73.66651) (xy 132.019737 73.666503) (xy 131.982477 73.576549) (xy 131.959397 73.520827) - (xy 131.95939 73.520814) (xy 131.871789 73.389711) (xy 131.871786 73.389707) (xy 131.760292 73.278213) - (xy 131.760288 73.27821) (xy 131.629185 73.190609) (xy 131.629172 73.190602) (xy 131.483501 73.130264) - (xy 131.483489 73.130261) (xy 131.328845 73.0995) (xy 131.328842 73.0995) (xy 131.171158 73.0995) - (xy 131.171155 73.0995) (xy 131.01651 73.130261) (xy 131.016498 73.130264) (xy 130.870827 73.190602) - (xy 130.870814 73.190609) (xy 130.739711 73.27821) (xy 130.739707 73.278213) (xy 130.628213 73.389707) - (xy 130.62821 73.389711) (xy 130.540609 73.520814) (xy 130.540602 73.520827) (xy 130.480264 73.666498) - (xy 130.480261 73.66651) (xy 130.4495 73.821153) (xy 120.2505 73.821153) (xy 120.2505 71.021153) - (xy 123.0995 71.021153) (xy 123.0995 71.178846) (xy 123.130261 71.333489) (xy 123.130264 71.333501) - (xy 123.190602 71.479172) (xy 123.190609 71.479185) (xy 123.27821 71.610288) (xy 123.278213 71.610292) - (xy 123.389707 71.721786) (xy 123.389711 71.721789) (xy 123.520814 71.80939) (xy 123.520827 71.809397) - (xy 123.666498 71.869735) (xy 123.666503 71.869737) (xy 123.821153 71.900499) (xy 123.821156 71.9005) - (xy 123.821158 71.9005) (xy 123.978844 71.9005) (xy 123.978845 71.900499) (xy 124.133497 71.869737) - (xy 124.279179 71.809394) (xy 124.390811 71.734803) (xy 124.457485 71.713927) (xy 124.524865 71.732411) - (xy 124.571555 71.784389) (xy 124.581316 71.813715) (xy 124.605141 71.93349) (xy 124.605144 71.9335) - (xy 124.665482 72.079171) (xy 124.665489 72.079184) (xy 124.75309 72.210287) (xy 124.753093 72.210291) - (xy 124.864587 72.321785) (xy 124.864591 72.321788) (xy 124.995694 72.409389) (xy 124.995707 72.409396) - (xy 125.141378 72.469734) (xy 125.141383 72.469736) (xy 125.296033 72.500498) (xy 125.296036 72.500499) - (xy 125.296038 72.500499) (xy 125.453724 72.500499) (xy 125.453725 72.500498) (xy 125.608377 72.469736) - (xy 125.754059 72.409393) (xy 125.885169 72.321788) (xy 125.996669 72.210288) (xy 126.084274 72.079178) - (xy 126.144617 71.933496) (xy 126.17538 71.778841) (xy 126.17538 71.621157) (xy 126.17538 71.621154) - (xy 126.175379 71.621152) (xy 126.163432 71.56109) (xy 126.144617 71.466502) (xy 126.108308 71.378844) - (xy 126.084277 71.320826) (xy 126.084273 71.320819) (xy 126.07463 71.306387) (xy 126.017679 71.221153) - (xy 126.6995 71.221153) (xy 126.6995 71.378846) (xy 126.730261 71.533489) (xy 126.730264 71.533501) - (xy 126.790602 71.679172) (xy 126.790609 71.679185) (xy 126.87821 71.810288) (xy 126.878213 71.810292) - (xy 126.989707 71.921786) (xy 126.989711 71.921789) (xy 127.120814 72.00939) (xy 127.120827 72.009397) - (xy 127.266498 72.069735) (xy 127.266503 72.069737) (xy 127.421153 72.100499) (xy 127.421156 72.1005) - (xy 127.421158 72.1005) (xy 127.578844 72.1005) (xy 127.578845 72.100499) (xy 127.733497 72.069737) - (xy 127.879179 72.009394) (xy 128.010289 71.921789) (xy 128.121789 71.810289) (xy 128.147939 71.771153) - (xy 132.4495 71.771153) (xy 132.4495 71.928846) (xy 132.480261 72.083489) (xy 132.480264 72.083501) - (xy 132.540602 72.229172) (xy 132.540609 72.229185) (xy 132.62821 72.360288) (xy 132.628213 72.360292) - (xy 132.739707 72.471786) (xy 132.739711 72.471789) (xy 132.870814 72.55939) (xy 132.870827 72.559397) - (xy 133.016498 72.619735) (xy 133.016503 72.619737) (xy 133.171153 72.650499) (xy 133.171156 72.6505) - (xy 133.171158 72.6505) (xy 133.328844 72.6505) (xy 133.328845 72.650499) (xy 133.483497 72.619737) - (xy 133.629179 72.559394) (xy 133.760289 72.471789) (xy 133.871789 72.360289) (xy 133.959394 72.229179) - (xy 134.019737 72.083497) (xy 134.0505 71.928842) (xy 134.0505 71.771158) (xy 134.0505 71.771155) - (xy 134.050499 71.771153) (xy 134.035585 71.696175) (xy 134.019737 71.616503) (xy 134.017163 71.610288) - (xy 133.959397 71.470827) (xy 133.95939 71.470814) (xy 133.871789 71.339711) (xy 133.871786 71.339707) - (xy 133.760292 71.228213) (xy 133.760288 71.22821) (xy 133.629185 71.140609) (xy 133.629172 71.140602) - (xy 133.483501 71.080264) (xy 133.483489 71.080261) (xy 133.328845 71.0495) (xy 133.328842 71.0495) - (xy 133.171158 71.0495) (xy 133.171155 71.0495) (xy 133.01651 71.080261) (xy 133.016498 71.080264) - (xy 132.870827 71.140602) (xy 132.870814 71.140609) (xy 132.739711 71.22821) (xy 132.739707 71.228213) - (xy 132.628213 71.339707) (xy 132.62821 71.339711) (xy 132.540609 71.470814) (xy 132.540602 71.470827) - (xy 132.480264 71.616498) (xy 132.480261 71.61651) (xy 132.4495 71.771153) (xy 128.147939 71.771153) - (xy 128.172226 71.734805) (xy 128.198038 71.696175) (xy 128.198038 71.696174) (xy 128.209394 71.679179) - (xy 128.269737 71.533497) (xy 128.3005 71.378842) (xy 128.3005 71.221158) (xy 128.3005 71.221155) - (xy 128.300499 71.221153) (xy 128.300427 71.220793) (xy 128.269737 71.066503) (xy 128.259859 71.042656) - (xy 128.209397 70.920827) (xy 128.20939 70.920814) (xy 128.121789 70.789711) (xy 128.121786 70.789707) - (xy 128.010292 70.678213) (xy 128.010288 70.67821) (xy 127.879185 70.590609) (xy 127.879172 70.590602) - (xy 127.733501 70.530264) (xy 127.733489 70.530261) (xy 127.578845 70.4995) (xy 127.578842 70.4995) - (xy 127.421158 70.4995) (xy 127.421155 70.4995) (xy 127.26651 70.530261) (xy 127.266498 70.530264) - (xy 127.120827 70.590602) (xy 127.120814 70.590609) (xy 126.989711 70.67821) (xy 126.989707 70.678213) - (xy 126.878213 70.789707) (xy 126.87821 70.789711) (xy 126.790609 70.920814) (xy 126.790602 70.920827) - (xy 126.730264 71.066498) (xy 126.730261 71.06651) (xy 126.6995 71.221153) (xy 126.017679 71.221153) - (xy 125.996669 71.189709) (xy 125.885172 71.078212) (xy 125.885168 71.078209) (xy 125.754065 70.990608) - (xy 125.754052 70.990601) (xy 125.608381 70.930263) (xy 125.608369 70.93026) (xy 125.453725 70.899499) - (xy 125.453722 70.899499) (xy 125.296038 70.899499) (xy 125.296035 70.899499) (xy 125.14139 70.93026) - (xy 125.141378 70.930263) (xy 124.995707 70.990601) (xy 124.995694 70.990608) (xy 124.884071 71.065193) - (xy 124.817393 71.086071) (xy 124.750013 71.067586) (xy 124.703323 71.015607) (xy 124.693563 70.986282) - (xy 124.675512 70.895538) (xy 124.669737 70.866503) (xy 124.637929 70.789711) (xy 124.609397 70.720827) - (xy 124.60939 70.720814) (xy 124.521789 70.589711) (xy 124.521786 70.589707) (xy 124.410292 70.478213) - (xy 124.410288 70.47821) (xy 124.279185 70.390609) (xy 124.279172 70.390602) (xy 124.133501 70.330264) - (xy 124.133489 70.330261) (xy 123.978845 70.2995) (xy 123.978842 70.2995) (xy 123.821158 70.2995) - (xy 123.821155 70.2995) (xy 123.66651 70.330261) (xy 123.666498 70.330264) (xy 123.520827 70.390602) - (xy 123.520814 70.390609) (xy 123.389711 70.47821) (xy 123.389707 70.478213) (xy 123.278213 70.589707) - (xy 123.27821 70.589711) (xy 123.190609 70.720814) (xy 123.190602 70.720827) (xy 123.130264 70.866498) - (xy 123.130261 70.86651) (xy 123.0995 71.021153) (xy 120.2505 71.021153) (xy 120.2505 70.021153) - (xy 143.9995 70.021153) (xy 143.9995 70.178846) (xy 144.030261 70.333489) (xy 144.030264 70.333501) - (xy 144.090602 70.479172) (xy 144.090609 70.479185) (xy 144.17821 70.610288) (xy 144.178213 70.610292) - (xy 144.289707 70.721786) (xy 144.289711 70.721789) (xy 144.420814 70.80939) (xy 144.420827 70.809397) - (xy 144.522952 70.851698) (xy 144.577356 70.895538) (xy 144.599421 70.961833) (xy 144.5995 70.966259) - (xy 144.5995 71.028846) (xy 144.630261 71.183489) (xy 144.630264 71.183501) (xy 144.690602 71.329172) - (xy 144.690609 71.329185) (xy 144.77821 71.460288) (xy 144.778213 71.460292) (xy 144.889707 71.571786) - (xy 144.889711 71.571789) (xy 145.020814 71.65939) (xy 145.020827 71.659397) (xy 145.152476 71.713927) - (xy 145.166503 71.719737) (xy 145.321153 71.750499) (xy 145.321156 71.7505) (xy 145.321158 71.7505) - (xy 145.478844 71.7505) (xy 145.478845 71.750499) (xy 145.633497 71.719737) (xy 145.779179 71.659394) - (xy 145.910289 71.571789) (xy 146.021789 71.460289) (xy 146.109394 71.329179) (xy 146.169737 71.183497) - (xy 146.2005 71.028842) (xy 146.2005 70.871158) (xy 146.2005 70.871155) (xy 146.200499 70.871153) - (xy 146.194073 70.838848) (xy 146.169737 70.716503) (xy 146.127438 70.614383) (xy 146.109397 70.570827) - (xy 146.10939 70.570814) (xy 146.021789 70.439711) (xy 146.021786 70.439707) (xy 145.910292 70.328213) - (xy 145.910288 70.32821) (xy 145.779185 70.240609) (xy 145.779175 70.240604) (xy 145.677047 70.198301) - (xy 145.667602 70.19069) (xy 145.656013 70.187111) (xy 145.640904 70.169175) (xy 145.622644 70.15446) - (xy 145.617697 70.141625) (xy 145.610999 70.133674) (xy 145.606637 70.112931) (xy 145.601528 70.099674) - (xy 145.6005 70.09174) (xy 145.6005 70.021158) (xy 145.571236 69.874038) (xy 149.9995 69.874038) - (xy 149.9995 70.125962) (xy 150.026986 70.2995) (xy 150.03891 70.374785) (xy 150.11676 70.614383) - (xy 150.231132 70.838848) (xy 150.379201 71.042649) (xy 150.379205 71.042654) (xy 150.557345 71.220794) - (xy 150.55735 71.220798) (xy 150.695028 71.320826) (xy 150.761155 71.36887) (xy 150.904184 71.441747) - (xy 150.985616 71.483239) (xy 150.985618 71.483239) (xy 150.985621 71.483241) (xy 151.225215 71.56109) - (xy 151.474038 71.6005) (xy 151.474039 71.6005) (xy 151.725961 71.6005) (xy 151.725962 71.6005) - (xy 151.974785 71.56109) (xy 152.214379 71.483241) (xy 152.438845 71.36887) (xy 152.642656 71.220793) - (xy 152.820793 71.042656) (xy 152.96887 70.838845) (xy 153.083241 70.614379) (xy 153.16109 70.374785) - (xy 153.2005 70.125962) (xy 153.2005 69.874038) (xy 153.16109 69.625215) (xy 153.083241 69.385621) - (xy 153.083239 69.385618) (xy 153.083239 69.385616) (xy 153.03936 69.2995) (xy 152.96887 69.161155) - (xy 152.949952 69.135117) (xy 152.820798 68.95735) (xy 152.820794 68.957345) (xy 152.642654 68.779205) - (xy 152.642649 68.779201) (xy 152.438848 68.631132) (xy 152.438847 68.631131) (xy 152.438845 68.63113) - (xy 152.368747 68.595413) (xy 152.214383 68.51676) (xy 151.974785 68.43891) (xy 151.866669 68.421786) - (xy 151.725962 68.3995) (xy 151.474038 68.3995) (xy 151.349626 68.419205) (xy 151.225214 68.43891) - (xy 150.985616 68.51676) (xy 150.761151 68.631132) (xy 150.55735 68.779201) (xy 150.557345 68.779205) - (xy 150.379205 68.957345) (xy 150.379201 68.95735) (xy 150.231132 69.161151) (xy 150.11676 69.385616) - (xy 150.050447 69.589707) (xy 150.03891 69.625215) (xy 149.9995 69.874038) (xy 145.571236 69.874038) - (xy 145.569737 69.866503) (xy 145.569735 69.866498) (xy 145.509397 69.720827) (xy 145.50939 69.720814) + (xy 132.019737 73.666503) (xy 131.973115 73.553946) (xy 131.959397 73.520827) (xy 131.95939 73.520814) + (xy 131.871789 73.389711) (xy 131.871786 73.389707) (xy 131.760292 73.278213) (xy 131.760288 73.27821) + (xy 131.629185 73.190609) (xy 131.629172 73.190602) (xy 131.483501 73.130264) (xy 131.483489 73.130261) + (xy 131.328845 73.0995) (xy 131.328842 73.0995) (xy 131.171158 73.0995) (xy 131.171155 73.0995) + (xy 131.01651 73.130261) (xy 131.016498 73.130264) (xy 130.870827 73.190602) (xy 130.870814 73.190609) + (xy 130.739711 73.27821) (xy 130.739707 73.278213) (xy 130.628213 73.389707) (xy 130.62821 73.389711) + (xy 130.540609 73.520814) (xy 130.540602 73.520827) (xy 130.480264 73.666498) (xy 130.480261 73.66651) + (xy 130.4495 73.821153) (xy 128.343848 73.821153) (xy 128.33366 73.796558) (xy 128.333655 73.796549) + (xy 128.246054 73.665446) (xy 128.246051 73.665442) (xy 128.134557 73.553948) (xy 128.134553 73.553945) + (xy 128.00345 73.466344) (xy 128.003437 73.466337) (xy 127.857766 73.405999) (xy 127.857754 73.405996) + (xy 127.70311 73.375235) (xy 127.703107 73.375235) (xy 127.545423 73.375235) (xy 127.54542 73.375235) + (xy 127.390775 73.405996) (xy 127.390763 73.405999) (xy 127.245092 73.466337) (xy 127.245079 73.466344) + (xy 127.113976 73.553945) (xy 127.113972 73.553948) (xy 127.002478 73.665442) (xy 127.002475 73.665446) + (xy 126.914874 73.796549) (xy 126.914867 73.796562) (xy 126.854529 73.942233) (xy 126.854526 73.942245) + (xy 126.823765 74.096888) (xy 126.823765 74.254581) (xy 126.854526 74.409224) (xy 126.854529 74.409236) + (xy 126.914867 74.554907) (xy 126.914874 74.55492) (xy 127.002475 74.686023) (xy 127.002478 74.686027) + (xy 127.113972 74.797521) (xy 127.113976 74.797524) (xy 127.245079 74.885125) (xy 127.245081 74.885126) + (xy 127.245086 74.885129) (xy 127.264489 74.893166) (xy 127.318892 74.937003) (xy 127.340959 75.003297) + (xy 127.323682 75.070997) (xy 127.320141 75.076617) (xy 127.290608 75.120816) (xy 127.290602 75.120827) + (xy 127.230264 75.266498) (xy 127.230261 75.26651) (xy 127.1995 75.421153) (xy 127.1995 75.578846) + (xy 127.230261 75.733489) (xy 127.230264 75.733501) (xy 127.290602 75.879172) (xy 127.290609 75.879185) + (xy 127.325304 75.931109) (xy 127.346182 75.997786) (xy 127.327698 76.065167) (xy 127.325304 76.068891) + (xy 127.290609 76.120814) (xy 127.290604 76.120823) (xy 127.279954 76.146535) (xy 127.236111 76.200937) + (xy 127.169817 76.223) (xy 127.102118 76.205719) (xy 127.096503 76.202181) (xy 127.079185 76.190609) + (xy 127.079172 76.190602) (xy 126.933501 76.130264) (xy 126.933489 76.130261) (xy 126.778845 76.0995) + (xy 126.778842 76.0995) (xy 126.621158 76.0995) (xy 126.621155 76.0995) (xy 126.46651 76.130261) + (xy 126.466498 76.130264) (xy 126.320827 76.190602) (xy 126.320814 76.190609) (xy 126.189711 76.27821) + (xy 126.189707 76.278213) (xy 126.078213 76.389707) (xy 126.07821 76.389711) (xy 125.990609 76.520814) + (xy 125.990602 76.520827) (xy 125.930264 76.666498) (xy 125.930261 76.66651) (xy 125.8995 76.821153) + (xy 120.2505 76.821153) (xy 120.2505 73.421153) (xy 124.8995 73.421153) (xy 124.8995 73.578846) + (xy 124.930261 73.733489) (xy 124.930264 73.733501) (xy 124.990602 73.879172) (xy 124.990609 73.879185) + (xy 125.07821 74.010288) (xy 125.078213 74.010292) (xy 125.189707 74.121786) (xy 125.189711 74.121789) + (xy 125.320814 74.20939) (xy 125.320827 74.209397) (xy 125.466498 74.269735) (xy 125.466503 74.269737) + (xy 125.621153 74.300499) (xy 125.621156 74.3005) (xy 125.621158 74.3005) (xy 125.778844 74.3005) + (xy 125.778845 74.300499) (xy 125.933497 74.269737) (xy 126.079179 74.209394) (xy 126.210289 74.121789) + (xy 126.321789 74.010289) (xy 126.409394 73.879179) (xy 126.469737 73.733497) (xy 126.5005 73.578842) + (xy 126.5005 73.421158) (xy 126.5005 73.421155) (xy 126.500499 73.421153) (xy 126.483152 73.333945) + (xy 126.469737 73.266503) (xy 126.438298 73.190602) (xy 126.409397 73.120827) (xy 126.40939 73.120814) + (xy 126.321789 72.989711) (xy 126.321786 72.989707) (xy 126.210292 72.878213) (xy 126.210288 72.87821) + (xy 126.124897 72.821153) (xy 140.0995 72.821153) (xy 140.0995 72.978846) (xy 140.130261 73.133489) + (xy 140.130264 73.133501) (xy 140.190602 73.279172) (xy 140.190609 73.279185) (xy 140.27821 73.410288) + (xy 140.278213 73.410292) (xy 140.389707 73.521786) (xy 140.389711 73.521789) (xy 140.520814 73.60939) + (xy 140.520827 73.609397) (xy 140.658683 73.666498) (xy 140.666503 73.669737) (xy 140.821153 73.700499) + (xy 140.821156 73.7005) (xy 140.821158 73.7005) (xy 140.978844 73.7005) (xy 140.978845 73.700499) + (xy 141.133497 73.669737) (xy 141.279179 73.609394) (xy 141.410289 73.521789) (xy 141.521789 73.410289) + (xy 141.609394 73.279179) (xy 141.669737 73.133497) (xy 141.7005 72.978842) (xy 141.7005 72.821158) + (xy 141.7005 72.821155) (xy 141.700499 72.821153) (xy 141.682419 72.730261) (xy 141.669737 72.666503) + (xy 141.669735 72.666498) (xy 141.609397 72.520827) (xy 141.60939 72.520814) (xy 141.521789 72.389711) + (xy 141.521786 72.389707) (xy 141.410292 72.278213) (xy 141.410288 72.27821) (xy 141.279185 72.190609) + (xy 141.279172 72.190602) (xy 141.133501 72.130264) (xy 141.133489 72.130261) (xy 140.978845 72.0995) + (xy 140.978842 72.0995) (xy 140.821158 72.0995) (xy 140.821155 72.0995) (xy 140.66651 72.130261) + (xy 140.666498 72.130264) (xy 140.520827 72.190602) (xy 140.520814 72.190609) (xy 140.389711 72.27821) + (xy 140.389707 72.278213) (xy 140.278213 72.389707) (xy 140.27821 72.389711) (xy 140.190609 72.520814) + (xy 140.190602 72.520827) (xy 140.130264 72.666498) (xy 140.130261 72.66651) (xy 140.0995 72.821153) + (xy 126.124897 72.821153) (xy 126.079185 72.790609) (xy 126.079172 72.790602) (xy 125.933501 72.730264) + (xy 125.933489 72.730261) (xy 125.778845 72.6995) (xy 125.778842 72.6995) (xy 125.621158 72.6995) + (xy 125.621155 72.6995) (xy 125.46651 72.730261) (xy 125.466498 72.730264) (xy 125.320827 72.790602) + (xy 125.320814 72.790609) (xy 125.189711 72.87821) (xy 125.189707 72.878213) (xy 125.078213 72.989707) + (xy 125.07821 72.989711) (xy 124.990609 73.120814) (xy 124.990602 73.120827) (xy 124.930264 73.266498) + (xy 124.930261 73.26651) (xy 124.8995 73.421153) (xy 120.2505 73.421153) (xy 120.2505 69.074038) + (xy 121.6995 69.074038) (xy 121.6995 69.325962) (xy 121.73891 69.574785) (xy 121.81676 69.814383) + (xy 121.895413 69.968747) (xy 121.922115 70.021153) (xy 121.931132 70.038848) (xy 122.079201 70.242649) + (xy 122.079205 70.242654) (xy 122.257345 70.420794) (xy 122.25735 70.420798) (xy 122.380525 70.510289) + (xy 122.461155 70.56887) (xy 122.565009 70.621786) (xy 122.685616 70.683239) (xy 122.685618 70.683239) + (xy 122.685621 70.683241) (xy 122.925215 70.76109) (xy 123.174038 70.8005) (xy 123.174039 70.8005) + (xy 123.425961 70.8005) (xy 123.425962 70.8005) (xy 123.674785 70.76109) (xy 123.914379 70.683241) + (xy 124.138845 70.56887) (xy 124.342656 70.420793) (xy 124.520793 70.242656) (xy 124.66887 70.038845) + (xy 124.728837 69.921153) (xy 132.5495 69.921153) (xy 132.5495 70.078846) (xy 132.580261 70.233489) + (xy 132.580264 70.233501) (xy 132.640602 70.379172) (xy 132.640609 70.379185) (xy 132.72821 70.510288) + (xy 132.728213 70.510292) (xy 132.839707 70.621786) (xy 132.839711 70.621789) (xy 132.970814 70.70939) + (xy 132.970827 70.709397) (xy 133.072952 70.751698) (xy 133.127356 70.795538) (xy 133.149421 70.861833) + (xy 133.1495 70.866259) (xy 133.1495 70.978846) (xy 133.180261 71.133489) (xy 133.180264 71.133501) + (xy 133.240602 71.279172) (xy 133.240609 71.279185) (xy 133.32821 71.410288) (xy 133.328213 71.410292) + (xy 133.439707 71.521786) (xy 133.439711 71.521789) (xy 133.570814 71.60939) (xy 133.570827 71.609397) + (xy 133.716498 71.669735) (xy 133.716503 71.669737) (xy 133.871153 71.700499) (xy 133.871156 71.7005) + (xy 133.871158 71.7005) (xy 134.028844 71.7005) (xy 134.028845 71.700499) (xy 134.183497 71.669737) + (xy 134.329179 71.609394) (xy 134.460289 71.521789) (xy 134.571789 71.410289) (xy 134.659394 71.279179) + (xy 134.719737 71.133497) (xy 134.7505 70.978842) (xy 134.7505 70.821158) (xy 134.7505 70.821155) + (xy 134.750499 70.821153) (xy 134.740272 70.769737) (xy 134.719737 70.666503) (xy 134.680102 70.570814) + (xy 134.659397 70.520827) (xy 134.65939 70.520814) (xy 134.571789 70.389711) (xy 134.571786 70.389707) + (xy 134.460292 70.278213) (xy 134.460288 70.27821) (xy 134.329185 70.190609) (xy 134.329175 70.190604) + (xy 134.227047 70.148301) (xy 134.211481 70.135757) (xy 134.193297 70.127453) (xy 134.184832 70.114282) + (xy 134.172644 70.10446) (xy 134.166331 70.085492) (xy 134.155523 70.068675) (xy 134.15156 70.041114) + (xy 134.150579 70.038166) (xy 134.1505 70.03374) (xy 134.1505 70.021153) (xy 143.9995 70.021153) + (xy 143.9995 70.178846) (xy 144.030261 70.333489) (xy 144.030264 70.333501) (xy 144.090602 70.479172) + (xy 144.090609 70.479185) (xy 144.17821 70.610288) (xy 144.178213 70.610292) (xy 144.289707 70.721786) + (xy 144.289711 70.721789) (xy 144.420814 70.80939) (xy 144.420827 70.809397) (xy 144.522952 70.851698) + (xy 144.577356 70.895538) (xy 144.599421 70.961833) (xy 144.5995 70.966259) (xy 144.5995 71.028846) + (xy 144.630261 71.183489) (xy 144.630264 71.183501) (xy 144.690602 71.329172) (xy 144.690609 71.329185) + (xy 144.77821 71.460288) (xy 144.778213 71.460292) (xy 144.889707 71.571786) (xy 144.889711 71.571789) + (xy 145.020814 71.65939) (xy 145.020827 71.659397) (xy 145.12006 71.7005) (xy 145.166503 71.719737) + (xy 145.321153 71.750499) (xy 145.321156 71.7505) (xy 145.321158 71.7505) (xy 145.478844 71.7505) + (xy 145.478845 71.750499) (xy 145.633497 71.719737) (xy 145.779179 71.659394) (xy 145.910289 71.571789) + (xy 146.021789 71.460289) (xy 146.109394 71.329179) (xy 146.169737 71.183497) (xy 146.2005 71.028842) + (xy 146.2005 70.871158) (xy 146.2005 70.871155) (xy 146.200499 70.871153) (xy 146.178606 70.76109) + (xy 146.169737 70.716503) (xy 146.155959 70.683239) (xy 146.109397 70.570827) (xy 146.10939 70.570814) + (xy 146.021789 70.439711) (xy 146.021786 70.439707) (xy 145.910292 70.328213) (xy 145.910288 70.32821) + (xy 145.779185 70.240609) (xy 145.779175 70.240604) (xy 145.677047 70.198301) (xy 145.622644 70.15446) + (xy 145.600579 70.088166) (xy 145.6005 70.08374) (xy 145.6005 70.021155) (xy 145.600499 70.021153) + (xy 145.569737 69.866503) (xy 145.566534 69.858771) (xy 145.509397 69.720827) (xy 145.50939 69.720814) (xy 145.421789 69.589711) (xy 145.421786 69.589707) (xy 145.310292 69.478213) (xy 145.310288 69.47821) (xy 145.179185 69.390609) (xy 145.179172 69.390602) (xy 145.033501 69.330264) (xy 145.033489 69.330261) (xy 144.878845 69.2995) (xy 144.878842 69.2995) (xy 144.721158 69.2995) (xy 144.721155 69.2995) (xy 144.56651 69.330261) (xy 144.566498 69.330264) (xy 144.420827 69.390602) (xy 144.420814 69.390609) (xy 144.289711 69.47821) (xy 144.289707 69.478213) (xy 144.178213 69.589707) (xy 144.17821 69.589711) (xy 144.090609 69.720814) (xy 144.090602 69.720827) (xy 144.030264 69.866498) (xy 144.030261 69.86651) - (xy 143.9995 70.021153) (xy 120.2505 70.021153) (xy 120.2505 67.721153) (xy 129.9995 67.721153) - (xy 129.9995 67.878846) (xy 130.030261 68.033489) (xy 130.030264 68.033501) (xy 130.090602 68.179172) - (xy 130.090609 68.179185) (xy 130.17821 68.310288) (xy 130.178213 68.310292) (xy 130.289707 68.421786) - (xy 130.289711 68.421789) (xy 130.420814 68.50939) (xy 130.420827 68.509397) (xy 130.566498 68.569735) - (xy 130.566503 68.569737) (xy 130.721153 68.600499) (xy 130.721156 68.6005) (xy 130.721158 68.6005) - (xy 130.878844 68.6005) (xy 130.878845 68.600499) (xy 131.033497 68.569737) (xy 131.179179 68.509394) - (xy 131.310289 68.421789) (xy 131.421789 68.310289) (xy 131.509394 68.179179) (xy 131.569737 68.033497) - (xy 131.6005 67.878842) (xy 131.6005 67.721158) (xy 131.6005 67.721155) (xy 131.600499 67.721153) - (xy 131.569738 67.56651) (xy 131.569737 67.566503) (xy 131.569735 67.566498) (xy 131.509397 67.420827) - (xy 131.50939 67.420814) (xy 131.421789 67.289711) (xy 131.421786 67.289707) (xy 131.310292 67.178213) - (xy 131.310288 67.17821) (xy 131.179185 67.090609) (xy 131.179172 67.090602) (xy 131.033501 67.030264) - (xy 131.033489 67.030261) (xy 130.878845 66.9995) (xy 130.878842 66.9995) (xy 130.721158 66.9995) - (xy 130.721155 66.9995) (xy 130.56651 67.030261) (xy 130.566498 67.030264) (xy 130.420827 67.090602) - (xy 130.420814 67.090609) (xy 130.289711 67.17821) (xy 130.289707 67.178213) (xy 130.178213 67.289707) - (xy 130.17821 67.289711) (xy 130.090609 67.420814) (xy 130.090602 67.420827) (xy 130.030264 67.566498) - (xy 130.030261 67.56651) (xy 129.9995 67.721153) (xy 120.2505 67.721153) (xy 120.2505 64.921153) - (xy 129.9495 64.921153) (xy 129.9495 65.078846) (xy 129.980261 65.233489) (xy 129.980264 65.233501) - (xy 130.040602 65.379172) (xy 130.040609 65.379185) (xy 130.12821 65.510288) (xy 130.128213 65.510292) - (xy 130.239707 65.621786) (xy 130.239711 65.621789) (xy 130.370814 65.70939) (xy 130.370827 65.709397) - (xy 130.516498 65.769735) (xy 130.516503 65.769737) (xy 130.671153 65.800499) (xy 130.671156 65.8005) - (xy 130.671158 65.8005) (xy 130.828844 65.8005) (xy 130.828845 65.800499) (xy 130.983497 65.769737) - (xy 131.129179 65.709394) (xy 131.260289 65.621789) (xy 131.371789 65.510289) (xy 131.459394 65.379179) - (xy 131.519737 65.233497) (xy 131.5505 65.078842) (xy 131.5505 64.921158) (xy 131.5505 64.921155) - (xy 131.550499 64.921153) (xy 131.519738 64.76651) (xy 131.519737 64.766503) (xy 131.519735 64.766498) - (xy 131.459397 64.620827) (xy 131.45939 64.620814) (xy 131.371789 64.489711) (xy 131.371786 64.489707) - (xy 131.260292 64.378213) (xy 131.260288 64.37821) (xy 131.129185 64.290609) (xy 131.129172 64.290602) - (xy 130.983501 64.230264) (xy 130.983489 64.230261) (xy 130.828845 64.1995) (xy 130.828842 64.1995) - (xy 130.671158 64.1995) (xy 130.671155 64.1995) (xy 130.51651 64.230261) (xy 130.516498 64.230264) - (xy 130.370827 64.290602) (xy 130.370814 64.290609) (xy 130.239711 64.37821) (xy 130.239707 64.378213) - (xy 130.128213 64.489707) (xy 130.12821 64.489711) (xy 130.040609 64.620814) (xy 130.040602 64.620827) - (xy 129.980264 64.766498) (xy 129.980261 64.76651) (xy 129.9495 64.921153) (xy 120.2505 64.921153) - (xy 120.2505 62.921153) (xy 121.1995 62.921153) (xy 121.1995 63.078846) (xy 121.230261 63.233489) - (xy 121.230264 63.233501) (xy 121.290602 63.379172) (xy 121.290609 63.379185) (xy 121.37821 63.510288) - (xy 121.378213 63.510292) (xy 121.489707 63.621786) (xy 121.489711 63.621789) (xy 121.620814 63.70939) - (xy 121.620827 63.709397) (xy 121.766498 63.769735) (xy 121.766503 63.769737) (xy 121.907906 63.797864) - (xy 121.921153 63.800499) (xy 121.921156 63.8005) (xy 121.921158 63.8005) (xy 122.078844 63.8005) - (xy 122.078845 63.800499) (xy 122.233497 63.769737) (xy 122.346166 63.723067) (xy 122.379172 63.709397) - (xy 122.379172 63.709396) (xy 122.379179 63.709394) (xy 122.510289 63.621789) (xy 122.621789 63.510289) - (xy 122.709394 63.379179) (xy 122.769737 63.233497) (xy 122.8005 63.078842) (xy 122.8005 62.921158) - (xy 122.8005 62.921155) (xy 122.800499 62.921153) (xy 122.787391 62.855255) (xy 122.769737 62.766503) - (xy 122.73142 62.673996) (xy 122.709397 62.620827) (xy 122.709392 62.620818) (xy 122.707304 62.617693) - (xy 122.706712 62.615804) (xy 122.706521 62.615446) (xy 122.706589 62.615409) (xy 122.686425 62.551016) - (xy 122.704908 62.483636) (xy 122.756886 62.436944) (xy 122.786213 62.427183) (xy 122.804328 62.42358) - (xy 122.931811 62.370775) (xy 123.046542 62.294114) (xy 123.144114 62.196542) (xy 123.220775 62.081811) - (xy 123.27358 61.954328) (xy 123.285888 61.892452) (xy 123.3005 61.818995) (xy 126.149499 61.818995) - (xy 126.176418 61.954322) (xy 126.176421 61.954332) (xy 126.229221 62.081804) (xy 126.229228 62.081817) - (xy 126.305885 62.196541) (xy 126.305888 62.196545) (xy 126.403454 62.294111) (xy 126.403458 62.294114) - (xy 126.518182 62.370771) (xy 126.518195 62.370778) (xy 126.645667 62.423578) (xy 126.645672 62.42358) - (xy 126.645676 62.42358) (xy 126.645677 62.423581) (xy 126.781004 62.4505) (xy 126.781007 62.4505) - (xy 126.918995 62.4505) (xy 127.010041 62.432389) (xy 127.054328 62.42358) (xy 127.181811 62.370775) - (xy 127.296542 62.294114) (xy 127.394114 62.196542) (xy 127.470775 62.081811) (xy 127.52358 61.954328) - (xy 127.535888 61.892452) (xy 127.5505 61.818995) (xy 127.5505 61.681004) (xy 127.523581 61.545677) - (xy 127.52358 61.545676) (xy 127.52358 61.545672) (xy 127.523578 61.545667) (xy 127.470778 61.418195) - (xy 127.470771 61.418182) (xy 127.394114 61.303458) (xy 127.394111 61.303454) (xy 127.296545 61.205888) - (xy 127.296541 61.205885) (xy 127.181817 61.129228) (xy 127.181804 61.129221) (xy 127.054332 61.076421) - (xy 127.054322 61.076418) (xy 126.918995 61.0495) (xy 126.918993 61.0495) (xy 126.781007 61.0495) - (xy 126.781005 61.0495) (xy 126.645677 61.076418) (xy 126.645667 61.076421) (xy 126.518195 61.129221) - (xy 126.518182 61.129228) (xy 126.403458 61.205885) (xy 126.403454 61.205888) (xy 126.305888 61.303454) - (xy 126.305885 61.303458) (xy 126.229228 61.418182) (xy 126.229221 61.418195) (xy 126.176421 61.545667) - (xy 126.176418 61.545677) (xy 126.1495 61.681004) (xy 126.1495 61.681007) (xy 126.1495 61.818993) - (xy 126.1495 61.818995) (xy 126.149499 61.818995) (xy 123.3005 61.818995) (xy 123.3005 61.681004) - (xy 123.273581 61.545677) (xy 123.27358 61.545676) (xy 123.27358 61.545672) (xy 123.273578 61.545667) - (xy 123.220778 61.418195) (xy 123.220771 61.418182) (xy 123.144114 61.303458) (xy 123.144111 61.303454) - (xy 123.046545 61.205888) (xy 123.046541 61.205885) (xy 122.931817 61.129228) (xy 122.931804 61.129221) - (xy 122.804332 61.076421) (xy 122.804322 61.076418) (xy 122.668995 61.0495) (xy 122.668993 61.0495) - (xy 122.531007 61.0495) (xy 122.531005 61.0495) (xy 122.395677 61.076418) (xy 122.395667 61.076421) - (xy 122.268195 61.129221) (xy 122.268182 61.129228) (xy 122.153458 61.205885) (xy 122.153454 61.205888) - (xy 122.055888 61.303454) (xy 122.055885 61.303458) (xy 121.979228 61.418182) (xy 121.979221 61.418195) - (xy 121.926421 61.545667) (xy 121.926418 61.545677) (xy 121.8995 61.681004) (xy 121.8995 61.681007) - (xy 121.8995 61.818993) (xy 121.8995 61.818995) (xy 121.899499 61.818995) (xy 121.926418 61.954322) - (xy 121.92642 61.954328) (xy 121.948515 62.007671) (xy 121.962021 62.040276) (xy 121.96949 62.109746) - (xy 121.938215 62.172225) (xy 121.878126 62.207877) (xy 121.871653 62.209346) (xy 121.766507 62.230262) - (xy 121.766498 62.230264) (xy 121.620827 62.290602) (xy 121.620814 62.290609) (xy 121.489711 62.37821) - (xy 121.489707 62.378213) (xy 121.378213 62.489707) (xy 121.37821 62.489711) (xy 121.290609 62.620814) - (xy 121.290602 62.620827) (xy 121.230264 62.766498) (xy 121.230261 62.76651) (xy 121.1995 62.921153) - (xy 120.2505 62.921153) (xy 120.2505 60.3745) (xy 120.270185 60.307461) (xy 120.322989 60.261706) + (xy 143.9995 70.021153) (xy 134.1505 70.021153) (xy 134.1505 69.921155) (xy 134.150499 69.921153) + (xy 134.119738 69.76651) (xy 134.119737 69.766503) (xy 134.100812 69.720814) (xy 134.059397 69.620827) + (xy 134.05939 69.620814) (xy 133.971789 69.489711) (xy 133.971786 69.489707) (xy 133.860292 69.378213) + (xy 133.860288 69.37821) (xy 133.729185 69.290609) (xy 133.729172 69.290602) (xy 133.583501 69.230264) + (xy 133.583489 69.230261) (xy 133.428845 69.1995) (xy 133.428842 69.1995) (xy 133.271158 69.1995) + (xy 133.271155 69.1995) (xy 133.11651 69.230261) (xy 133.116498 69.230264) (xy 132.970827 69.290602) + (xy 132.970814 69.290609) (xy 132.839711 69.37821) (xy 132.839707 69.378213) (xy 132.728213 69.489707) + (xy 132.72821 69.489711) (xy 132.640609 69.620814) (xy 132.640602 69.620827) (xy 132.580264 69.766498) + (xy 132.580261 69.76651) (xy 132.5495 69.921153) (xy 124.728837 69.921153) (xy 124.783241 69.814379) + (xy 124.86109 69.574785) (xy 124.9005 69.325962) (xy 124.9005 69.074038) (xy 150.0995 69.074038) + (xy 150.0995 69.325962) (xy 150.13891 69.574785) (xy 150.21676 69.814383) (xy 150.295413 69.968747) + (xy 150.322115 70.021153) (xy 150.331132 70.038848) (xy 150.479201 70.242649) (xy 150.479205 70.242654) + (xy 150.657345 70.420794) (xy 150.65735 70.420798) (xy 150.780525 70.510289) (xy 150.861155 70.56887) + (xy 150.965009 70.621786) (xy 151.085616 70.683239) (xy 151.085618 70.683239) (xy 151.085621 70.683241) + (xy 151.325215 70.76109) (xy 151.574038 70.8005) (xy 151.574039 70.8005) (xy 151.825961 70.8005) + (xy 151.825962 70.8005) (xy 152.074785 70.76109) (xy 152.314379 70.683241) (xy 152.538845 70.56887) + (xy 152.742656 70.420793) (xy 152.920793 70.242656) (xy 153.06887 70.038845) (xy 153.183241 69.814379) + (xy 153.26109 69.574785) (xy 153.3005 69.325962) (xy 153.3005 69.074038) (xy 153.26109 68.825215) + (xy 153.183241 68.585621) (xy 153.183239 68.585618) (xy 153.183239 68.585616) (xy 153.141747 68.504184) + (xy 153.06887 68.361155) (xy 153.049952 68.335117) (xy 152.920798 68.15735) (xy 152.920794 68.157345) + (xy 152.742654 67.979205) (xy 152.742649 67.979201) (xy 152.538848 67.831132) (xy 152.538847 67.831131) + (xy 152.538845 67.83113) (xy 152.468747 67.795413) (xy 152.314383 67.71676) (xy 152.074785 67.63891) + (xy 151.825962 67.5995) (xy 151.574038 67.5995) (xy 151.449626 67.619205) (xy 151.325214 67.63891) + (xy 151.085616 67.71676) (xy 150.861151 67.831132) (xy 150.65735 67.979201) (xy 150.657345 67.979205) + (xy 150.479205 68.157345) (xy 150.479201 68.15735) (xy 150.331132 68.361151) (xy 150.21676 68.585616) + (xy 150.13891 68.825214) (xy 150.13891 68.825215) (xy 150.0995 69.074038) (xy 124.9005 69.074038) + (xy 124.86109 68.825215) (xy 124.783241 68.585621) (xy 124.783239 68.585618) (xy 124.783239 68.585616) + (xy 124.741747 68.504184) (xy 124.66887 68.361155) (xy 124.649952 68.335117) (xy 124.520798 68.15735) + (xy 124.520794 68.157345) (xy 124.342654 67.979205) (xy 124.342649 67.979201) (xy 124.138848 67.831132) + (xy 124.138847 67.831131) (xy 124.138845 67.83113) (xy 124.068747 67.795413) (xy 123.914383 67.71676) + (xy 123.674785 67.63891) (xy 123.425962 67.5995) (xy 123.174038 67.5995) (xy 123.049626 67.619205) + (xy 122.925214 67.63891) (xy 122.685616 67.71676) (xy 122.461151 67.831132) (xy 122.25735 67.979201) + (xy 122.257345 67.979205) (xy 122.079205 68.157345) (xy 122.079201 68.15735) (xy 121.931132 68.361151) + (xy 121.81676 68.585616) (xy 121.73891 68.825214) (xy 121.73891 68.825215) (xy 121.6995 69.074038) + (xy 120.2505 69.074038) (xy 120.2505 65.821153) (xy 129.9995 65.821153) (xy 129.9995 65.978846) + (xy 130.030261 66.133489) (xy 130.030264 66.133501) (xy 130.090602 66.279172) (xy 130.090609 66.279185) + (xy 130.17821 66.410288) (xy 130.178213 66.410292) (xy 130.289707 66.521786) (xy 130.289711 66.521789) + (xy 130.420814 66.60939) (xy 130.420827 66.609397) (xy 130.566498 66.669735) (xy 130.566503 66.669737) + (xy 130.721153 66.700499) (xy 130.721156 66.7005) (xy 130.721158 66.7005) (xy 130.878844 66.7005) + (xy 130.878845 66.700499) (xy 131.033497 66.669737) (xy 131.179179 66.609394) (xy 131.310289 66.521789) + (xy 131.421789 66.410289) (xy 131.509394 66.279179) (xy 131.569737 66.133497) (xy 131.6005 65.978842) + (xy 131.6005 65.821158) (xy 131.6005 65.821155) (xy 131.600499 65.821153) (xy 131.569738 65.66651) + (xy 131.569737 65.666503) (xy 131.569735 65.666498) (xy 131.509397 65.520827) (xy 131.50939 65.520814) + (xy 131.421789 65.389711) (xy 131.421786 65.389707) (xy 131.310292 65.278213) (xy 131.310288 65.27821) + (xy 131.179185 65.190609) (xy 131.179172 65.190602) (xy 131.033501 65.130264) (xy 131.033489 65.130261) + (xy 130.878845 65.0995) (xy 130.878842 65.0995) (xy 130.721158 65.0995) (xy 130.721155 65.0995) + (xy 130.56651 65.130261) (xy 130.566498 65.130264) (xy 130.420827 65.190602) (xy 130.420814 65.190609) + (xy 130.289711 65.27821) (xy 130.289707 65.278213) (xy 130.178213 65.389707) (xy 130.17821 65.389711) + (xy 130.090609 65.520814) (xy 130.090602 65.520827) (xy 130.030264 65.666498) (xy 130.030261 65.66651) + (xy 129.9995 65.821153) (xy 120.2505 65.821153) (xy 120.2505 64.021153) (xy 120.8995 64.021153) + (xy 120.8995 64.178846) (xy 120.930261 64.333489) (xy 120.930264 64.333501) (xy 120.990602 64.479172) + (xy 120.990609 64.479185) (xy 121.07821 64.610288) (xy 121.078213 64.610292) (xy 121.189707 64.721786) + (xy 121.189711 64.721789) (xy 121.320814 64.80939) (xy 121.320827 64.809397) (xy 121.466498 64.869735) + (xy 121.466503 64.869737) (xy 121.621153 64.900499) (xy 121.621156 64.9005) (xy 121.621158 64.9005) + (xy 121.778844 64.9005) (xy 121.778845 64.900499) (xy 121.933497 64.869737) (xy 122.079179 64.809394) + (xy 122.210289 64.721789) (xy 122.321789 64.610289) (xy 122.409394 64.479179) (xy 122.469737 64.333497) + (xy 122.5005 64.178842) (xy 122.5005 64.021158) (xy 122.5005 64.021155) (xy 122.500499 64.021153) + (xy 122.469738 63.86651) (xy 122.469737 63.866503) (xy 122.469735 63.866498) (xy 122.409397 63.720827) + (xy 122.40939 63.720814) (xy 122.321789 63.589711) (xy 122.321786 63.589707) (xy 122.210292 63.478213) + (xy 122.210288 63.47821) (xy 122.079185 63.390609) (xy 122.079172 63.390602) (xy 121.933501 63.330264) + (xy 121.933489 63.330261) (xy 121.778845 63.2995) (xy 121.778842 63.2995) (xy 121.621158 63.2995) + (xy 121.621155 63.2995) (xy 121.46651 63.330261) (xy 121.466498 63.330264) (xy 121.320827 63.390602) + (xy 121.320814 63.390609) (xy 121.189711 63.47821) (xy 121.189707 63.478213) (xy 121.078213 63.589707) + (xy 121.07821 63.589711) (xy 120.990609 63.720814) (xy 120.990602 63.720827) (xy 120.930264 63.866498) + (xy 120.930261 63.86651) (xy 120.8995 64.021153) (xy 120.2505 64.021153) (xy 120.2505 61.818995) + (xy 120.824499 61.818995) (xy 120.851418 61.954322) (xy 120.851421 61.954332) (xy 120.904221 62.081804) + (xy 120.904228 62.081817) (xy 120.980885 62.196541) (xy 120.980888 62.196545) (xy 121.078454 62.294111) + (xy 121.078458 62.294114) (xy 121.193182 62.370771) (xy 121.193195 62.370778) (xy 121.320667 62.423578) + (xy 121.320672 62.42358) (xy 121.320676 62.42358) (xy 121.320677 62.423581) (xy 121.456004 62.4505) + (xy 121.456007 62.4505) (xy 121.593995 62.4505) (xy 121.685041 62.432389) (xy 121.729328 62.42358) + (xy 121.856811 62.370775) (xy 121.971542 62.294114) (xy 122.069114 62.196542) (xy 122.145775 62.081811) + (xy 122.19858 61.954328) (xy 122.2255 61.818995) (xy 125.074499 61.818995) (xy 125.101418 61.954322) + (xy 125.101421 61.954332) (xy 125.154221 62.081804) (xy 125.154228 62.081817) (xy 125.230885 62.196541) + (xy 125.230888 62.196545) (xy 125.328454 62.294111) (xy 125.328458 62.294114) (xy 125.443182 62.370771) + (xy 125.443195 62.370778) (xy 125.570667 62.423578) (xy 125.570672 62.42358) (xy 125.570676 62.42358) + (xy 125.570677 62.423581) (xy 125.706004 62.4505) (xy 125.706007 62.4505) (xy 125.843995 62.4505) + (xy 125.935041 62.432389) (xy 125.979328 62.42358) (xy 126.106811 62.370775) (xy 126.221542 62.294114) + (xy 126.319114 62.196542) (xy 126.395775 62.081811) (xy 126.44858 61.954328) (xy 126.4755 61.818993) + (xy 126.4755 61.681007) (xy 126.4755 61.681004) (xy 126.448581 61.545677) (xy 126.44858 61.545676) + (xy 126.44858 61.545672) (xy 126.448578 61.545667) (xy 126.395778 61.418195) (xy 126.395771 61.418182) + (xy 126.319114 61.303458) (xy 126.319111 61.303454) (xy 126.221545 61.205888) (xy 126.221541 61.205885) + (xy 126.106817 61.129228) (xy 126.106804 61.129221) (xy 125.979332 61.076421) (xy 125.979322 61.076418) + (xy 125.843995 61.0495) (xy 125.843993 61.0495) (xy 125.706007 61.0495) (xy 125.706005 61.0495) + (xy 125.570677 61.076418) (xy 125.570667 61.076421) (xy 125.443195 61.129221) (xy 125.443182 61.129228) + (xy 125.328458 61.205885) (xy 125.328454 61.205888) (xy 125.230888 61.303454) (xy 125.230885 61.303458) + (xy 125.154228 61.418182) (xy 125.154221 61.418195) (xy 125.101421 61.545667) (xy 125.101418 61.545677) + (xy 125.0745 61.681004) (xy 125.0745 61.681007) (xy 125.0745 61.818993) (xy 125.0745 61.818995) + (xy 125.074499 61.818995) (xy 122.2255 61.818995) (xy 122.2255 61.818993) (xy 122.2255 61.681007) + (xy 122.2255 61.681004) (xy 122.198581 61.545677) (xy 122.19858 61.545676) (xy 122.19858 61.545672) + (xy 122.198578 61.545667) (xy 122.145778 61.418195) (xy 122.145771 61.418182) (xy 122.069114 61.303458) + (xy 122.069111 61.303454) (xy 121.971545 61.205888) (xy 121.971541 61.205885) (xy 121.856817 61.129228) + (xy 121.856804 61.129221) (xy 121.729332 61.076421) (xy 121.729322 61.076418) (xy 121.593995 61.0495) + (xy 121.593993 61.0495) (xy 121.456007 61.0495) (xy 121.456005 61.0495) (xy 121.320677 61.076418) + (xy 121.320667 61.076421) (xy 121.193195 61.129221) (xy 121.193182 61.129228) (xy 121.078458 61.205885) + (xy 121.078454 61.205888) (xy 120.980888 61.303454) (xy 120.980885 61.303458) (xy 120.904228 61.418182) + (xy 120.904221 61.418195) (xy 120.851421 61.545667) (xy 120.851418 61.545677) (xy 120.8245 61.681004) + (xy 120.8245 61.681007) (xy 120.8245 61.818993) (xy 120.8245 61.818995) (xy 120.824499 61.818995) + (xy 120.2505 61.818995) (xy 120.2505 60.3745) (xy 120.270185 60.307461) (xy 120.322989 60.261706) (xy 120.3745 60.2505) (xy 128.876 60.2505) ) ) diff --git a/PCB/snips_controller.yaml b/PCB/snips_controller.yaml deleted file mode 100644 index dc1cb2b..0000000 --- a/PCB/snips_controller.yaml +++ /dev/null @@ -1,1340 +0,0 @@ -# Historical design notes from the earlier YAML workflow. The active circuit -# source is stackup/board.kdl and stackup/parts.kdl. -project: - name: Snips Controller - revision: 0.1 - description: > - Wireless handheld R2-D2 controller (Snips Controller). ESP32-S3-WROOM-1 - module MCU (integrated WiFi/BT, flash, crystal, antenna — no external - RF/flash/crystal design needed; see MCU_Core section), custom USB-C for - flashing/charging/future accessory expansion, XBee3 Zigbee radio over - SPI, hall effect thumbstick and analog trigger, SSD1306 OLED display, - WS2812 RGB LED, embedded bq25185 charger + TLV62569 3.3V buck, swappable - single-cell Li-ion battery, soft-latch power control. Macro buttons are - direct-wired (no scan matrix) — ESP32-S3-WROOM-1 has ample spare GPIO, - unlike the bare-RP2350A design this replaced. - -# --------------------------------------------------------------------------- -# NET LEGEND -# --------------------------------------------------------------------------- -# VBUS - 5V USB input from USB-C connector -# VSYS - Battery/charger system output (bq25185 SYS pin), ~3.7-4.5V -# 3V3 - Regulated 3.3V output from TLV62569 buck -# GND - Ground -# VBAT - Battery positive terminal -# USB_DP_MCU/USB_DM_MCU - USB D+/D- data lines (native USB, U_MCU pins 14/13) -# I2C_SDA - I2C data (pin 12) — OLED -# I2C_SCL - I2C clock (pin 17) — OLED -# SPI_SCK - XBee SPI clock (pin 18) -# SPI_MOSI - XBee SPI MOSI (pin 19) -# SPI_MISO - XBee SPI MISO (pin 20) -# XBee_CS - XBee SPI chip select (pin 21) -# XBEE_ON_SLEEP - XBee ON/~SLEEP status, host input (pin 22) -# XBEE_SPI_ATTN - XBee SPI data-ready interrupt (pin 8) -# TRIG_ANALOG - Analog trigger output from DRV5055 (pin 4, ADC1_CH3) -# STICK_X - Thumbstick X axis (pin 5, ADC1_CH4) -# STICK_Y - Thumbstick Y axis (pin 6, ADC1_CH5) -# STAT1 - bq25185 charge status pin 1 (open-drain, pin 39) -# STAT2 - bq25185 charge status pin 2 (open-drain, pin 34) — combined -# with STAT1 to fully decode charging/done/fault states -# RGB_DIN - WS2812 NeoPixel data in (pin 37) -# PWR_EN - TLV62569 EN signal, driven by soft latch PFET drain -# PWR_GATE - PFET gate node (pulled HIGH by default = off) -# PWR_LATCH_G - NFET latch gate (driven by button OR PWR_HOLD) -# PWR_HOLD - Pin 36 output to OR diode, holds latch after boot -# PWR_BTN_SENSE - Power button junction: R_BTN_PU/R_PWR_SENSE divider -# midpoint, pulled to VSYS, button pulls to GND, feeds pin 38 -# BTN_* - Individual button nets (pulled up internally, wired to GND), -# includes the 6 macro buttons — direct-wired, no scan matrix -# MCU_EN - EN (reset) pin, pulled up via R_EN_PU -# MCU_BOOT - GPIO0/BOOT strapping pin, pulled up via R_BOOT_PU, button -# pulls low to enter UF2/download mode -# VSYS_SENSE - Divide-by-3 VSYS sense into pin 7 (ADC1_CH6), via -# R_VSYS1/R_VSYS2 - -# --------------------------------------------------------------------------- -# RESERVED GPIO — DO NOT USE -# --------------------------------------------------------------------------- -# Pin 3 (EN) - reset/enable, pulled up via R_EN_PU -# Pin 27 (GPIO0) - BOOT strapping pin, pulled up via R_BOOT_PU + button -# Pin 13 (GPIO19) - USB_D- (native USB) -# Pin 14 (GPIO20) - USB_D+ (native USB) -# Pins 1, 40, 41 - GND -# Pin 2 - 3V3 -# -# Use with care if ever needed (strapping pins, sampled at boot): -# Pin 15 (GPIO3), Pin 16 (GPIO46), Pin 26 (GPIO45) -# -# Spare (clean, no caveats) — default JTAG, fully reusable as plain GPIO: -# Pin 32 (GPIO39/MTCK), Pin 33 (GPIO40/MTDO), Pin 34 (GPIO41/MTDI), -# Pin 35 (GPIO42/MTMS) - -# --------------------------------------------------------------------------- -groups: - - # ------------------------------------------------------------------------- - # 1. USB-C Connector - # ------------------------------------------------------------------------- - # USB 2.0 only. CC resistors required for USB-C power negotiation. - # VBUS -> bq25185 VIN. D+/D- -> ESP32-S3-WROOM-1 native USB data pins. - # SHIELD -> GND. - # USB_DP/USB_DM run from the connector through the 27R series resistors in - # MCU_Core (R_USB_DP/R_USB_DM) to the ESP32-S3-WROOM-1's own native USB - # pins (13/14). Real, exposed USB data — used for firmware flashing, - # charging, and future accessory expansion, which is exactly what a - # stock Pico-family module can't provide (its USB is hardwired to its - # own onboard connector, not broken out). - USB_C: - components: - J_USB: - symbol: Connector:USB_C_Receptacle_USB2.0_16P - sheet: USB_C - value: USB-C - footprint: Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 - R_CC1: - symbol: Device:R - sheet: USB_C - value: 5.1kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_CC2: - symbol: Device:R - sheet: USB_C - value: 5.1kΩ - footprint: Resistor_SMD:R_0402_1005Metric - D_VBUS_TVS: - symbol: Device:D_TVS - sheet: USB_C - value: PESD5V0S1BA - footprint: Diode_SMD:D_SOD-323 - # Bidirectional ESD/surge protection on VBUS. Both pins are cathodes - # internally (symmetric device) — no polarity to get wrong. Place as - # close to J_USB1's VBUS/GND pins as possible, upstream of C_VIN_1/ - # C_VIN_2, so a surge is clamped before it reaches U_CHG1's IN pin. - connections: - # USB-C receptacle duplicates VBUS/GND/D+/D- across the A and B rows - # for cable-flip support — both instances of each must be tied - # together (standard USB2-only practice: no orientation mux needed). - # Name-based pin lookup only resolves the first match, so the B-row - # duplicates are addressed explicitly by pin number. - - net: VBUS - global: true - pins: [J_USB:VBUS, - J_USB:A9, - J_USB:B4, - J_USB:B9, - U_CHG:IN, - C_VIN_1:1, - C_VIN_2:1, - PF_VBUS:1, - D_VBUS_TVS:1] - - net: USB_DP - pins: [J_USB:D+, J_USB:B6, R_USB_DP:1] - - net: USB_DM - pins: [J_USB:D-, J_USB:B7, R_USB_DM:1] - - net: GND - pins: [J_USB:GND, J_USB:A12, J_USB:B1, J_USB:B12, J_USB:SHIELD, - R_CC1:2, R_CC2:2, D_VBUS_TVS:2] - - net: USB_CC1 - pins: [J_USB:CC1, R_CC1:1] - - net: USB_CC2 - pins: [J_USB:CC2, R_CC2:1] - # SBU1/SBU2 (DisplayPort Alt Mode sideband) unused — USB 2.0 only - - no_connect: [J_USB:A8, J_USB:B8] - - # ------------------------------------------------------------------------- - # 2. bq25185 Battery Charger + Power Path - # ------------------------------------------------------------------------- - # VIN <- VBUS (5V USB) - # SYS -> VSYS rail - # BAT <-> VBAT - # STAT1 -> MCU pin 39 (GPIO1, open-drain, 10kΩ pull-up to 3V3) - # STAT2 -> MCU pin 34 (GPIO41, open-drain, 10kΩ pull-up to 3V3) — STAT1+ - # STAT2 together fully decode charging/done/fault states - # ISET -> R_ISET to GND. ICHG = 300 AΩ / RISET. - # RISET = 600Ω -> ~500mA charge current - # ILIM/VSET -> R_VSET = 18kΩ -> 4.2V VBATREG, 500mA input limit - # (per Table 7-1 in bq25185 datasheet) - # TS/MR -> R_TS = 10kΩ to GND (REQUIRED if no thermistor) - # CE -> GND (always enable charging) - # Decoupling: 10µF + 100nF on VIN; 10µF + 100nF on SYS; 10µF on BAT - # Use X7R/X5R ceramic, 25V rated on VIN and SYS pins - Power_Charger: - components: - U_CHG: - symbol: BQ25185DLHR:BQ25185DLHR - sheet: Power_Charger - value: bq25185 - footprint: BQ25185DLHR:IC_BQ25185DLHR - C_VIN_1: - symbol: Device:C - sheet: Power_Charger - value: 10µF - footprint: Capacitor_SMD:C_0805_2012Metric - C_VIN_2: - symbol: Device:C - sheet: Power_Charger - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - C_SYS_1: - symbol: Device:C - sheet: Power_Charger - value: 10µF - footprint: Capacitor_SMD:C_0805_2012Metric - C_SYS_2: - symbol: Device:C - sheet: Power_Charger - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - C_BAT: - symbol: Device:C - sheet: Power_Charger - value: 10µF - footprint: Capacitor_SMD:C_0805_2012Metric - R_ISET: - symbol: Device:R - sheet: Power_Charger - value: 600Ω - footprint: Resistor_SMD:R_0402_1005Metric - R_VSET: - symbol: Device:R - sheet: Power_Charger - value: 18kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_TS: - symbol: Device:R - sheet: Power_Charger - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_STAT1: - symbol: Device:R - sheet: Power_Charger - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_STAT2: - symbol: Device:R - sheet: Power_Charger - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - connections: - - net: VSYS - global: true - pins: [U_CHG:SYS, - C_SYS_1:1, - C_SYS_2:1, - U_BUCK:VIN, - C_BUCK_IN:1, - Q_PWR:S, - R_GATE:1, - R_BTN_PU:1, - R_VSYS1:1, - PF_VSYS:1] - - net: VBAT - pins: [U_CHG:BAT, C_BAT:1, PF_VBAT:1] - - net: STAT1 - pins: [U_CHG:STAT1, R_STAT1:1, U_MCU:39] - - net: STAT2 - pins: [U_CHG:STAT2, R_STAT2:1, U_MCU:34] - - net: 3V3 - pins: [R_STAT1:2, R_STAT2:2] - - net: GND - pins: [U_CHG:GND, C_VIN_1:2, C_VIN_2:2, C_SYS_1:2, C_SYS_2:2, - C_BAT:2, R_ISET:2, R_VSET:2, R_TS:2, "U_CHG:~{CE}", - U_CHG:THERMAL_PAD] - - net: CHG_ISET - pins: [U_CHG:ISET, R_ISET:1] - - net: CHG_VSET - pins: [U_CHG:ILIM/VSET, R_VSET:1] - - net: CHG_TS - pins: [U_CHG:TS/MR, R_TS:1] - # STAT2 left floating (not connected) - - no_connect: [U_CHG:STAT2] - - # ------------------------------------------------------------------------- - # 3. TLV62569 3.3V Buck Converter - # ------------------------------------------------------------------------- - # VIN <- VSYS - # VOUT -> 3V3 - # EN -> PWR_EN (soft latch power control, NOT tied to 3V3 directly) - # FB -> R_FB1/R_FB2 divider sets 3.3V output - # VOUT = 0.6V * (1 + R_FB1/R_FB2) - # R_FB1=100kΩ, R_FB2=56.2kΩ -> ~3.31V (verify with 1% resistors) - # L - 2.2µH (TI's standard recommended value for VOUT >= 1.8V, paired - # with 22µF COUT -- see TLV62569 datasheet Table 4), Bourns - # SRN4018-2R2M: 3.0A Isat, 44mΩ DCR, 4x4x1.8mm -- much smaller - # than a 12x12mm shielded inductor for a rail this small. - # Decoupling: 10µF on VIN, 22µF on VOUT - Power_Buck: - components: - U_BUCK: - symbol: Regulator_Switching:TLV62569DBV - sheet: Power_Buck - value: TLV62569 - footprint: Package_TO_SOT_SMD:SOT-23-5 - L_BUCK: - symbol: Device:L - sheet: Power_Buck - value: 2.2µH - footprint: Inductor_SMD:L_Bourns-SRN4018 - C_BUCK_IN: - symbol: Device:C - sheet: Power_Buck - value: 10µF - footprint: Capacitor_SMD:C_0805_2012Metric - C_BUCK_OUT: - symbol: Device:C - sheet: Power_Buck - value: 22µF - footprint: Capacitor_SMD:C_0805_2012Metric - R_FB1: - symbol: Device:R - sheet: Power_Buck - value: 255kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_FB2: - symbol: Device:R - sheet: Power_Buck - value: 56.2kΩ - footprint: Resistor_SMD:R_0402_1005Metric - connections: - - net: PWR_EN - pins: [U_BUCK:EN, Q_PWR:D] - - net: BUCK_SW - pins: [U_BUCK:SW, L_BUCK:1] - - net: 3V3 - pins: [L_BUCK:2, C_BUCK_OUT:1, R_FB1:2] - - net: BUCK_FB - pins: [U_BUCK:FB, R_FB1:1, R_FB2:1] - - net: GND - pins: [U_BUCK:GND, C_BUCK_IN:2, C_BUCK_OUT:2, R_FB2:2] - - # ------------------------------------------------------------------------- - # 4. Battery Connector - # ------------------------------------------------------------------------- - # External Li-ion/LiPo pack via JST-PH 2-pin pigtail, not an on-PCB cell - # holder -- the battery is mounted/molded into the controller shell itself - # (shape TBD), wired back to this connector. Right-angle/horizontal mount - # to keep the connector low-profile against the PCB. - # JST-PH 2-pin battery packs are conventionally pin 1 = +, pin 2 = - — - # double-check polarity against the actual pack before first power-up. - Battery: - components: - BT1: - symbol: Connector_Generic:Conn_01x02 - sheet: Battery - value: JST-PH_2Pin_Battery - footprint: Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal - connections: - - net: VBAT - pins: [BT1:1] - - net: GND - pins: [BT1:2] - - # ------------------------------------------------------------------------- - # 5. Power Control Circuit (soft latch, hybrid hardware+firmware) - # ------------------------------------------------------------------------- - # Boot (hardware): - # EN pulled LOW by default (off). Press PWR button -> D_OR1 drives - # Q_LATCH gate HIGH -> Q_LATCH on -> Q_PWR gate pulled LOW -> PWR_EN HIGH - # -> TLV62569 EN HIGH -> 3V3 up -> Pico boots. - # Firmware drives GP21 HIGH immediately on boot to hold latch via D_OR2. - # - # Shutdown (firmware): - # Firmware monitors PWR button on GP15 (3-second hold). - # On shutdown: drive GP21 LOW -> Q_LATCH off -> R_GATE pulls Q_PWR gate - # HIGH -> PWR_EN LOW -> 3V3 cut. - # - # CRITICAL: GP21 must be driven HIGH as the very first instruction in - # firmware or power cuts when user releases the power button. - # - # PWR_BTN_NODE pulled to VSYS via R_BTN_PU. R_PWR_SENSE (100kΩ to GND) - # divides with R_BTN_PU (100kΩ) giving ~2.1V at GP15 when idle (HIGH). - # Button press pulls to GND; GP15 reads LOW. 2.1V safe within 3.3V limit. - Power_Control: - components: - Q_PWR: - symbol: Transistor_FET:Q_PMOS_GSD - sheet: Power_Control - value: DMG2305UX - footprint: Package_TO_SOT_SMD:SOT-23 - Q_LATCH: - symbol: Transistor_FET:Q_NMOS_GSD - sheet: Power_Control - value: 2N7002 - footprint: Package_TO_SOT_SMD:SOT-23 - D_OR1: - symbol: Device:D_Small - sheet: Power_Control - value: 1N4148W - footprint: Diode_SMD:D_SOD-123 - D_OR2: - symbol: Device:D_Small - sheet: Power_Control - value: 1N4148W - footprint: Diode_SMD:D_SOD-123 - R_GATE: - symbol: Device:R - sheet: Power_Control - value: 100kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_BTN_PU: - symbol: Device:R - sheet: Power_Control - value: 100kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_PWR_SENSE: - symbol: Device:R - sheet: Power_Control - value: 100kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_LATCH_G: - symbol: Device:R - sheet: Power_Control - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - C_DBNC: - symbol: Device:C - sheet: Power_Control - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - SW_PWR: - symbol: Switch:SW_Push - sheet: Power_Control - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - connections: - - net: PWR_GATE - pins: [Q_PWR:G, R_GATE:2, Q_LATCH:D] - - net: PWR_LATCH_G - pins: [Q_LATCH:G, R_LATCH_G:2, D_OR1:K, D_OR2:K] - - net: GND - pins: [Q_LATCH:S, R_LATCH_G:1, C_DBNC:2, SW_PWR:2] - # PWR_BTN_NODE and PWR_BTN_SENSE are the same physical node (R_BTN_PU/ - # R_PWR_SENSE divider midpoint, also where the button pulls to GND) — - # standardized on one label (PWR_BTN_SENSE) to avoid an ERC ambiguous- - # net-name warning. - - net: PWR_BTN_SENSE - pins: [SW_PWR:1, R_BTN_PU:2, C_DBNC:1, D_OR1:A, R_PWR_SENSE:1, U_MCU:38] - - net: GND - pins: [R_PWR_SENSE:2] - - net: PWR_HOLD - pins: [D_OR2:A, U_MCU:36] - - # ------------------------------------------------------------------------- - # 6. MCU_Core: ESP32-S3-WROOM-1 module - # ------------------------------------------------------------------------- - # Pre-certified module (integrated flash, crystal, WiFi/BT radio + PCB - # antenna) — replaces the bare-RP2350A + external flash/crystal + Murata - # wireless module design. No RF design, no antenna licensing, no crystal - # load-cap calculation, no core-regulator LC filter: the module handles - # all of that internally. Symbol/footprint from Espressif's own official - # KiCad library (github.com/espressif/kicad-libraries), not hand-authored. - # - # Pins referenced by number, not name — the module's pins are heavily - # multi-function (e.g. pin 4 is "GPIO4/TOUCH4/ADC1_CH3") and numbers are - # unambiguous. GPIO26-32 are internally wired to the module's own flash - # and are not present on this symbol at all; GPIO33/34 exist on the bare - # chip but aren't broken out on the WROOM-1 module either. - # - # EN and GPIO0 (BOOT) both have internal weak pull-ups, but external - # 10kΩ pull-ups are standard, reliable practice for both (matches every - # real ESP32-S3 reference design, including Espressif's own DevKitC). - # GPIO0 additionally gets a button to pull it low at boot, exactly like - # the old RP2350 BOOTSEL pattern, just renamed to match ESP32 convention. - # - # ADC signals deliberately use ADC1-only pins (4/5/6/7) — ADC2 is - # unusable while WiFi is active on ESP32-S3, and this design keeps WiFi - # on. - MCU_Core: - components: - U_MCU: - symbol: Espressif:ESP32-S3-WROOM-1 - sheet: MCU_Core - value: ESP32-S3-WROOM-1-N8 - footprint: Espressif:ESP32-S3-WROOM-1 - SW_BOOT: - symbol: Switch:SW_Push - sheet: MCU_Core - value: Panasonic_EVQP2 - footprint: Button_Switch_SMD:SW_SPST_EVQP2_ShortPushTravel_H2.1mm - R_BOOT_PU: - symbol: Device:R - sheet: MCU_Core - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_EN_PU: - symbol: Device:R - sheet: MCU_Core - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_USB_DP: - symbol: Device:R - sheet: MCU_Core - value: 27Ω - footprint: Resistor_SMD:R_0402_1005Metric - R_USB_DM: - symbol: Device:R - sheet: MCU_Core - value: 27Ω - footprint: Resistor_SMD:R_0402_1005Metric - C_3V3_1: - symbol: Device:C - sheet: MCU_Core - value: 10µF - footprint: Capacitor_SMD:C_0603_1608Metric - C_3V3_2: - symbol: Device:C - sheet: MCU_Core - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - C_3V3_3: - symbol: Device:C - sheet: MCU_Core - value: 39pF - footprint: Capacitor_SMD:C_0402_1005Metric - # Third decoupling tier — plugs the PDN impedance gap between - # C_3V3_2's bypass and the parasitic inductance feeding it (analyzer - # flagged an anti-resonance near 955MHz). Value isn't precision- - # critical, anything ~10-100pF serves the same purpose. Place right - # at U_MCU1 pins 1/2, same corner as C_3V3_1/C_3V3_2. - R_VSYS1: - symbol: Device:R - sheet: MCU_Core - value: 200kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_VSYS2: - symbol: Device:R - sheet: MCU_Core - value: 100kΩ - footprint: Resistor_SMD:R_0402_1005Metric - connections: - - net: 3V3 - pins: [U_MCU:2, R_EN_PU:2, R_BOOT_PU:2, C_3V3_1:1, C_3V3_2:1, C_3V3_3:1] - - net: GND - pins: [U_MCU:1, U_MCU:40, U_MCU:41, C_3V3_1:2, C_3V3_2:2, C_3V3_3:2, SW_BOOT:1] - - net: MCU_EN - pins: [U_MCU:3, R_EN_PU:1] - - net: MCU_BOOT - pins: [U_MCU:27, R_BOOT_PU:1, SW_BOOT:2] - # USB (native — external USB-C connector via 27R series) - - net: USB_DP_MCU - pins: [R_USB_DP:2, U_MCU:14] - - net: USB_DM_MCU - pins: [R_USB_DM:2, U_MCU:13] - # SPI - XBee - - net: SPI_SCK - pins: [U_MCU:18, U_XBEE:SPI_CLK] - - net: SPI_MOSI - pins: [U_MCU:19, U_XBEE:SPI_MOSI] - - net: SPI_MISO - pins: [U_MCU:20, U_XBEE:SPI_MISO] - - net: XBee_CS - pins: [U_MCU:21, U_XBEE:SPI_SSEL] - - net: XBEE_ON_SLEEP - pins: [U_MCU:22, U_XBEE:ON_SLEEP] - - net: XBEE_SPI_ATTN - pins: [U_MCU:8, U_XBEE:SPI_ATTN] - # I2C - OLED + QMA6100P accelerometer, shared bus (no local pull-ups — - # Adafruit #938 breakout has them onboard for the OLED side) - - net: I2C_SDA - pins: [U_MCU:12, U_OLED:SDA, U_ACCEL:SDX] - - net: I2C_SCL - pins: [U_MCU:17, U_OLED:SCL, U_ACCEL:SCX] - # ADC inputs (ADC1-only, see note above) - - net: TRIG_ANALOG - pins: [U_MCU:4, U_HALL:OUT] - - net: STICK_X - pins: [U_MCU:5, J_STICK:2] - - net: STICK_Y - pins: [U_MCU:6, J_STICK:2'] - # Misc control - - net: RGB_DIN - pins: [U_MCU:37, R_RGB:2] - # Digital buttons (internal pull-ups in firmware) - # VOL_UP/DN and THR_UP/DN swapped edges (9/10 <-> 32/33) from the - # original assignment for easier routing — still a mirrored pair on - # the opposite edge for the second (opposite-handed) controller, same - # board, buttons remapped in firmware/Amidala rather than building two - # mirrored PCB variants; only which pair sits on which edge changed. - - net: BTN_VOL_UP - pins: [U_MCU:33, SW_VOL_UP:1] - - net: BTN_VOL_DN - pins: [U_MCU:32, SW_VOL_DN:1] - - net: BTN_THR_UP - pins: [U_MCU:9, SW_THR_UP:1] - - net: BTN_THR_DN - pins: [U_MCU:10, SW_THR_DN:1] - - net: BTN_TRIG_DIG - pins: [U_MCU:11, SW_TRIG_DIG:1] - - net: BTN_STICK - pins: [U_MCU:23, J_STICK:a] - # Macro buttons — direct-wired, no scan matrix. ESP32-S3-WROOM-1 has - # ample spare GPIO, unlike the bare-RP2350A design this replaced, - # so the 1-pin savings of a 2x3 matrix isn't worth the anti-ghosting - # diodes and scan firmware it costs. - - net: BTN_MACRO1 - pins: [U_MCU:24, SW_MACRO1:1] - - net: BTN_MACRO2 - pins: [U_MCU:25, SW_MACRO2:1] - - net: BTN_MACRO3 - pins: [U_MCU:28, SW_MACRO3:1] - - net: BTN_MACRO4 - pins: [U_MCU:29, SW_MACRO4:1] - - net: BTN_MACRO5 - pins: [U_MCU:30, SW_MACRO5:1] - - net: BTN_MACRO6 - pins: [U_MCU:31, SW_MACRO6:1] - # VSYS battery-voltage sense: divide-by-3 into ADC1_CH6 (pin 7) - - net: VSYS_SENSE - pins: [R_VSYS1:2, R_VSYS2:1, U_MCU:7] - - net: GND - pins: [R_VSYS2:2] - # XBee SLEEP_RQ (DTR): drives the module's pin-sleep request. Was - # tied straight to GND (see XBee section below); moved to the last - # clean spare GPIO so firmware can actually command sleep/wake - # instead of DTR being permanently deasserted. Global rather than - # hierarchical (like VBUS/VSYS above) — simpler than adding sheet - # boundary pins for a single two-sheet net. - - net: XBEE_SLEEP_RQ - global: true - pins: [U_MCU:35, U_XBEE:DTR] - # Accelerometer INT1 (QMA6100P, see Accelerometer section below): - # any-motion/no-motion hardware interrupt, lets the MCU light-sleep - # instead of polling for wake conditions. Global for the same reason - # as XBEE_SLEEP_RQ above. - - net: ACCEL_INT1 - global: true - pins: [U_MCU:16, U_ACCEL:INT1] - # Spare GPIO: 15/26 usable-with-care (strapping), 34 clean (default - # JTAG, fully reusable as plain GPIO; 32/33 from the same clean JTAG - # group now used above for BTN_VOL_UP/BTN_VOL_DN). Pins 16/35 (also - # strapping/clean-JTAG) are now spoken for above. - - no_connect: [U_MCU:15, U_MCU:26, U_MCU:34] - - # ------------------------------------------------------------------------- - # 7. XBee3 Radio (SPI mode, THT socket) - # ------------------------------------------------------------------------- - # THT socket for prototyping. Update footprint for SMT module on final PCB. - # RESET: 10kΩ pull-up to 3V3 + RC filter (100Ω + 100nF) per AmidalaShield. - # Decoupling: 100nF + 1µF + 47pF + 10µF on VCC, per the Digi XBee3 RF - # Module Hardware Reference Manual (doc 90001543, "Power supply design", - # p.52): "place a 1.0µF and 47pF capacitor as near as possible to the VCC - # connection... adding a 10µF decoupling capacitor is also recommended - # ... place the lower capacitance capacitors closest to the module." - # AmidalaShield used 8.2pF instead of 47pF here (likely inherited from - # older XBee/S2C guidance) — verified against the current XBee3-specific - # manual and corrected. At layout time, place in this order moving away - # from the module: 47pF closest, then 1µF, then 10µF, then the 100nF. - XBee: - components: - U_XBEE: - symbol: Xbee3:XB3-24Z8UT-J - sheet: XBee - value: XBee3 - footprint: Xbee3:XB324Z8UTJ - C_XBEE_VCC: - symbol: Device:C - sheet: XBee - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - C_XBEE_VCC2: - symbol: Device:C - sheet: XBee - value: 1µF - footprint: Capacitor_SMD:C_0603_1608Metric - C_XBEE_VCC3: - symbol: Device:C - sheet: XBee - value: 47pF - footprint: Capacitor_SMD:C_0402_1005Metric - C_XBEE_VCC4: - symbol: Device:C - sheet: XBee - value: 10µF - footprint: Capacitor_SMD:C_0603_1608Metric - R_XBEE_RST: - symbol: Device:R - sheet: XBee - value: 10kΩ - footprint: Resistor_SMD:R_0402_1005Metric - R_XBEE_RC: - symbol: Device:R - sheet: XBee - value: 100Ω - footprint: Resistor_SMD:R_0402_1005Metric - C_XBEE_RC: - symbol: Device:C - sheet: XBee - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [U_XBEE:VCC, C_XBEE_VCC:1, C_XBEE_VCC2:1, C_XBEE_VCC3:1, - C_XBEE_VCC4:1, R_XBEE_RST:1] - - net: GND - pins: [U_XBEE:GND, C_XBEE_VCC:2, C_XBEE_VCC2:2, C_XBEE_VCC3:2, - C_XBEE_VCC4:2, C_XBEE_RC:2] - - net: XBEE_RST_PU - pins: [R_XBEE_RST:2, R_XBEE_RC:1, C_XBEE_RC:1] - - net: XBEE_RESET - pins: [U_XBEE:RESET, R_XBEE_RC:2] - # ON_SLEEP/SPI_ATTN per Amidala's actual AmidalaShield netlist - # (pulled from its IPC-2581 export, not guessed): both go to host - # GPIO. SPI_ATTN is the XBee's data-ready interrupt line — needed - # for reliable SPI transfers rather than polling, not just a - # nice-to-have. - # - # DTR (SLEEP_RQ) diverges from Amidala's netlist on purpose: Amidala - # ties it straight to GND (permanently deasserted, no host-commanded - # sleep). This board wires it to a host GPIO instead (see - # XBEE_SLEEP_RQ net above, MCU pin 35/GPIO42) so firmware can put - # the module into pin sleep during low-power mode rather than - # keeping the radio powered the whole time. - # Remaining auxiliary pins unused: DOUT/DIN(secondary UART), - # RSSI_PWM, PWM1, [RESERVED]x2, CTS, ASSOCIATE, RTS, AD0 - - no_connect: [U_XBEE:2, U_XBEE:3, U_XBEE:6, U_XBEE:7, U_XBEE:8, - U_XBEE:12, U_XBEE:14, U_XBEE:15, U_XBEE:16, U_XBEE:20] - - # ------------------------------------------------------------------------- - # 8. SSD1306 OLED Display (1.3", 128x64, I2C) - # ------------------------------------------------------------------------- - # I2C address: 0x3C (default). - # No local I2C pull-ups — Adafruit #938 breakout has them onboard, and this - # board is committed to that breakout (not a bare OLED panel), so there's - # no future revision that would need R_I2C_SDA/R_I2C_SCL. Removed rather - # than kept as DNP to save the footprint space on a tight board. - # Decoupling: 10µF + 100nF on VCC. - # Display isn't on this PCB -- U_OLED is just a JST-SH 4-pin connector - # (VCC/GND/SCL/SDA) wired out to it, right-angle mount for low profile. - OLED: - components: - U_OLED: - symbol: SnipsControllers:SSD1306_OLED_4pin - sheet: OLED - value: JST-SH_4Pin_OLED - footprint: Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal - C_OLED_1: - symbol: Device:C - sheet: OLED - value: 10µF - footprint: Capacitor_SMD:C_0805_2012Metric - C_OLED_2: - symbol: Device:C - sheet: OLED - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [U_OLED:VCC, C_OLED_1:1, C_OLED_2:1] - - net: GND - pins: [U_OLED:GND, C_OLED_1:2, C_OLED_2:2] - - # ------------------------------------------------------------------------- - # 8a. QMA6100P Accelerometer (I2C, shares the OLED's bus) — low-power mode - # ------------------------------------------------------------------------- - # Chosen over MSA311/LIS3DH/ADXL345/MPU-6050 after checking JLCPCB's actual - # parts library: none of the candidates are Basic-library, so QMA6100P won - # on price ($0.61 @1pc), size (2x2x0.95mm LGA-12), and standby current - # (500nA typ., the lowest of the group — it has to stay active watching - # for motion through the whole low-power period). See PCB/GPIO_table.md's - # Accelerometer section for the full rationale and datasheet citation - # (QST Doc #13-52-20 Rev A1). - # - # Symbol/footprint hand-authored (SnipsControllers_Custom) — no existing - # library part for this package. Footprint pad geometry pulled from - # JLCPCB/LCSC's own EasyEDA component data (LCSC C2887190), the same - # manufacturer-verified footprint used for their PCBA service, rather than - # estimated from the preliminary datasheet's low-resolution mechanical - # drawing. - # - # AD0 -> GND selects I2C address 0x12. SENB -> 3V3 selects I2C protocol - # (tied high rather than left floating). RESV1/RESV2 -> GND and NC/INT2 - # left unconnected, all per the datasheet's Figure 4 (I2C Single Supply - # Connection) reference schematic. Decoupling per that same figure: 10nF + - # 100pF + 2.2nF on VDD, rather than this board's usual single 100nF — the - # two smallest values are a best-effort read of small print in a - # preliminary-datasheet figure and should be visually re-checked against - # the datasheet before fab. - Accelerometer: - components: - U_ACCEL: - symbol: SnipsControllers_Custom:QMA6100P - sheet: Accelerometer - value: QMA6100P - footprint: SnipsControllers_Custom:QMA6100P - C_ACCEL_1: - symbol: Device:C - sheet: Accelerometer - value: 10nF - footprint: Capacitor_SMD:C_0402_1005Metric - C_ACCEL_2: - symbol: Device:C - sheet: Accelerometer - value: 100pF - footprint: Capacitor_SMD:C_0402_1005Metric - C_ACCEL_3: - symbol: Device:C - sheet: Accelerometer - value: 2.2nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [U_ACCEL:VDD, U_ACCEL:SENB, C_ACCEL_1:1, C_ACCEL_2:1, C_ACCEL_3:1] - - net: GND - pins: [U_ACCEL:AD0, U_ACCEL:RESV1, U_ACCEL:RESV2, U_ACCEL:GNDIO, - U_ACCEL:GND, C_ACCEL_1:2, C_ACCEL_2:2, C_ACCEL_3:2] - - no_connect: [U_ACCEL:INT2, U_ACCEL:NC] - - # ------------------------------------------------------------------------- - # 9. DRV5055 Analog Hall Effect Trigger Sensor - # ------------------------------------------------------------------------- - # Ratiometric linear output, 3.3V native. A2 variant (50mV/mT). - # Decoupling: 100nF on VCC. - # Package: TO-92 for prototyping, SOT-23 for final PCB. - Hall_Trigger: - components: - U_HALL: - symbol: Sensor_Magnetic:DRV5055A2xLPGxQ1 - sheet: Hall_Trigger - value: DRV5055A2 - footprint: Package_TO_SOT_THT:TO-92_Inline - C_HALL: - symbol: Device:C - sheet: Hall_Trigger - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [U_HALL:VCC, C_HALL:1] - - net: GND - pins: [U_HALL:GND, C_HALL:2] - - # ------------------------------------------------------------------------- - # 10. GuliKit Hall Effect Thumbstick - # ------------------------------------------------------------------------- - # OEM-replacement-style hall/TMR stick (ALPS RKJXV1224 / C&K THB001P - # footprint family) -- a 2-axis potentiometer-emulation interface, not a - # simple VCC/GND/X/Y/SW breakout. Each axis needs its own low/wiper/high - # connection (1/2/3 for X, 1'/2'/3' for Y); switch is pins a/c (b/d are - # mechanically-redundant duplicate legs, intentionally unconnected). - # Decoupling: 100nF on VCC. - Thumbstick: - components: - J_STICK: - symbol: SnipsControllers_Custom:GuliKit_HallStick - sheet: Thumbstick - value: GuliKit_Thumbstick - footprint: SnipsControllers_Custom:GuliKit_HallStick - C_STICK: - symbol: Device:C - sheet: Thumbstick - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [J_STICK:3, J_STICK:3', C_STICK:1] - - net: GND - pins: [J_STICK:1, J_STICK:1', J_STICK:c, C_STICK:2] - - # ------------------------------------------------------------------------- - # 11. SK6812 RGB LED (NeoPixel-compatible) - # ------------------------------------------------------------------------- - # Historical choice of SK6812 assumed 3.3V compatibility. The SK6812MINI-E - # datasheet actually specifies 3.7V minimum, so the routed 3V3 supply is - # outside its stated operating range; see stackup/README.md. - # Pin and protocol compatible with WS2812B — driven via ESP32-S3's RMT - # peripheral (pin 37), the standard driver mechanism for this timing. - # R_RGB: 300-500Ω series on DIN for signal integrity (standard practice). - # Decoupling: 100nF on VCC. - RGB_LED: - components: - D_RGB: - symbol: LED:SK6812 - sheet: RGB_LED - value: SK6812MINI-E-012 - footprint: SnipsControllers_Custom:SK6812MINI-E-012 - R_RGB: - symbol: Device:R - sheet: RGB_LED - value: 330Ω - footprint: Resistor_SMD:R_0402_1005Metric - C_RGB: - symbol: Device:C - sheet: RGB_LED - value: 100nF - footprint: Capacitor_SMD:C_0402_1005Metric - connections: - - net: 3V3 - pins: [D_RGB:VDD, C_RGB:1] - - net: GND - pins: [D_RGB:VSS, C_RGB:2] - - net: RGB_DIN_R - pins: [R_RGB:1] - - net: RGB_DIN_R - pins: [D_RGB:DIN] - # DOUT: chains to the next LED in a strip — no next LED in this design - - no_connect: [D_RGB:DOUT] - - # ------------------------------------------------------------------------- - # 12-13. Direct Buttons (vol up/dn, digital trigger, 6 macro buttons) - # ------------------------------------------------------------------------- - # Active low, internal pull-ups in firmware. Wire to GND. - # Macro buttons are direct-wired here too (no 2x3 scan matrix) — see the - # MCU_Core note on why: ESP32-S3-WROOM-1 has enough spare GPIO that the - # matrix's 1-pin savings isn't worth the anti-ghosting diodes and scan - # firmware it used to require. - Buttons_Direct: - components: - SW_VOL_UP: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - SW_VOL_DN: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - SW_THR_UP: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - SW_THR_DN: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - SW_TRIG_DIG: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: Alps_SKRTLAE010 - footprint: Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 - SW_MACRO1: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - SW_MACRO2: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - SW_MACRO3: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - SW_MACRO4: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - SW_MACRO5: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - SW_MACRO6: - symbol: Switch:SW_Push - sheet: Buttons_Direct - value: 6x6x5mm SMD Tactile - footprint: Button_Switch_SMD:SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm - connections: - - net: GND - pins: [SW_VOL_UP:2, SW_VOL_DN:2, SW_THR_UP:2, SW_THR_DN:2, - SW_TRIG_DIG:2, SW_MACRO1:2, SW_MACRO2:2, SW_MACRO3:2, - SW_MACRO4:2, SW_MACRO5:2, SW_MACRO6:2] - - # ------------------------------------------------------------------------- - # 14. ERC power flags - # ------------------------------------------------------------------------- - # KiCad's ERC requires every net with a "power input" pin on it to also - # have a "power output" pin (or a PWR_FLAG) somewhere on that same net, - # to confirm the net is actually externally driven. None of our regulator - # ICs expose a strictly "power_out"-typed pin on 3V3/GND (their outputs - # come through inductors/resistors, which are "passive"-typed), so ERC - # can't infer it on its own. Standard, expected step for any schematic — - # not a design bug. PF_VSYS specifically is required even though VSYS - # already has a real Output-type driver (U_CHG:SYS) elsewhere on the - # net — Power_Buck's VIN pin is "Power input" type, which only accepts - # a genuine "Power output" pin as a driver, and PWR_FLAG is the only - # thing on this net with that exact type (confirmed empirically: removing - # PF_VSYS broke Power_Buck's ERC). No explicit position overrides needed - # — auto-layout places these fine now that routing is deterministic. - Power_Flags: - components: - PF_3V3: - symbol: power:PWR_FLAG - sheet: MCU_Core - value: PWR_FLAG - footprint: "" - power: true - on_board: false - in_bom: false - PF_GND: - symbol: power:PWR_FLAG - sheet: MCU_Core - value: PWR_FLAG - footprint: "" - power: true - on_board: false - in_bom: false - PF_VSYS: - symbol: power:PWR_FLAG - sheet: MCU_Core - value: PWR_FLAG - footprint: "" - power: true - on_board: false - in_bom: false - PF_VBUS: - symbol: power:PWR_FLAG - sheet: MCU_Core - value: PWR_FLAG - footprint: "" - power: true - on_board: false - in_bom: false - PF_VBAT: - symbol: power:PWR_FLAG - sheet: MCU_Core - value: PWR_FLAG - footprint: "" - power: true - on_board: false - in_bom: false - connections: - - net: 3V3 - pins: [PF_3V3:1] - - net: GND - pins: [PF_GND:1] - -# --------------------------------------------------------------------------- -# DESIGN NOTES -# --------------------------------------------------------------------------- -# 1. bq25185 TS/MR pin: MUST tie to GND via 10kΩ (R_TS) if no thermistor. -# Floating TS = charging suspended. Critical, easy to miss. -# -# 2. TLV62569 output voltage set by R_FB1/R_FB2 divider. -# VOUT = 0.6V * (1 + R_FB1/R_FB2). Verify with 1% resistors. -# -# 3. USB-C CC resistors (R_CC1, R_CC2 = 5.1kΩ to GND) REQUIRED for -# USB-C chargers to negotiate power. Omitting = no charging from USB-C. -# -# 4. I2C pull-ups: intentionally absent. Adafruit #938 breakout has onboard -# pull-ups — adding local ones would halve the effective resistance and -# cause I2C issues. Only relevant if a future revision drops the breakout -# for a bare OLED panel, which this board doesn't plan to do. -# -# 5. XBee RESET RC filter: same as AmidalaShield V1.2. -# 10kΩ pull-up to 3V3, 100Ω series + 100nF to GND at RESET pin. -# -# 6. Battery voltage sense: pin 7 (ADC1_CH6) via R_VSYS1/R_VSYS2 divider -# (reads VSYS/3). No firmware/WiFi ADC contention concern on ESP32-S3 — -# unlike the old bit-banged RP2350+CYW43439 design, WiFi is fully -# on-die here and doesn't share any exposed GPIO/ADC path. -# -# 7. ESP32-S3-WROOM-1 powered via its 3V3 pin (pin 2) directly — the module -# has no separate VSYS-style pin, its own internal regulation is only -# for the RF/digital core, not a board-level supply input. -# -# 8. EN (pin 3) and GPIO0/BOOT (pin 27) are strapping pins, each pulled up -# externally via 10kΩ (R_EN_PU/R_BOOT_PU) per standard ESP32-S3 -# practice. GPIO0 additionally has SW_BOOT to pull it low at boot to -# force UF2/download mode. GPIO3/45/46 are also strapping pins — left -# unconnected (see RESERVED GPIO), fine to use later but avoid anything -# that toggles during boot. -# -# 9. CE pin on bq25185 tied to GND (always enable charging). -# -# 10. Power control: PWR_HOLD (pin 36) must be driven HIGH as the very -# first instruction in firmware or power cuts when user releases the -# power button. -# -# 11. SK6812 DIN series resistor R_RGB placed close to the RGB_DIN -# pad (pin 37). The LED is supplied at 3.3V, below its specified 3.7V -# minimum; reduced brightness alone is not the full risk. -# -# 12. Macro buttons are direct-wired (no scan matrix, no anti-ghosting -# diodes needed) — see MCU_Core section for why. -# -# 13. STAT2 on bq25185 wired to R_STAT2 (10kΩ pull-up to 3V3) and MCU pin 34 -# (GPIO41). STAT1 alone only tells firmware "charging vs not" — STAT1+ -# STAT2 together fully decode the charger's 4 states (charging, done, -# recoverable fault, latched fault) per the datasheet's status table. -# -# 14. XBee footprint: Xbee3:XB324Z8UTJ (real THT footprint, same one -# already validated on the Amidala board — sourced from the vendor's -# multi-format library dump, not RF_Module:XBee_THT, which never -# actually existed in stock KiCad libraries). -# Update to SMT module footprint for final PCB if size requires it. -# -# 15. ESP32-S3-WROOM-1 antenna keepout: the module's footprint (Espressif's -# official Espressif.pretty library) includes the required antenna -# keepout area — keep copper/components out of it per the module's -# datasheet. Much simpler than the old Murata design's custom PCB -# trace antenna, but still a real layout-stage requirement. -# -# 16. Spare GPIO: pins 15/16/26 (strapping, usable with care) and pins -# 34/35 (default JTAG, cleanly reusable; 32/33 from the same group now -# used for BTN_VOL_UP/BTN_VOL_DN). See RESERVED GPIO header. - -sheets: - USB_C: - path: usb_c - position: [0, 0] - size: [299.72, 199.39] - pins: - - name: "USB_DP" - shape: bidirectional - position: [82.55, 199.39] - - name: "USB_DM" - shape: bidirectional - position: [217.17, 199.39] - Power_Charger: - path: power_charger - position: [350.52, 0] - size: [299.72, 199.39] - pins: - - name: "STAT1" - shape: output - position: [500.38, 199.39] - - name: "STAT2" - shape: output - position: [515.62, 199.39] - Power_Buck: - path: power_buck - position: [699.77, 0] - size: [299.72, 199.39] - pins: - - name: "PWR_EN" - shape: input - position: [849.63, 0] - Battery: - path: battery - position: [1050.29, 0] - size: [299.72, 199.39] - Power_Control: - path: power_control - position: [1399.54, 0] - size: [300.99, 199.39] - pins: - - name: "PWR_BTN_SENSE" - shape: bidirectional - position: [1482.09, 199.39] - - name: "PWR_HOLD" - shape: bidirectional - position: [1617.98, 199.39] - - name: "PWR_EN" - shape: output - position: [1549.4, 0] - RGB_LED: - path: rgb_led - position: [1750.06, 0] - size: [299.72, 199.39] - pins: - - name: "RGB_DIN" - shape: input - position: [1899.92, 199.39] - MCU_Core: - path: mcu_core - position: [699.77, 350.52] - size: [764.54, 499.11] - pins: - - name: "USB_DP" - shape: bidirectional - position: [763.27, 350.52] - - name: "USB_DM" - shape: bidirectional - position: [820.42, 350.52] - - name: "STAT1" - shape: input - position: [877.57, 350.52] - - name: "STAT2" - shape: input - position: [905.51, 350.52] - - name: "PWR_BTN_SENSE" - shape: bidirectional - position: [934.72, 350.52] - - name: "PWR_HOLD" - shape: bidirectional - position: [991.87, 350.52] - - name: "RGB_DIN" - shape: output - position: [1049.02, 350.52] - - name: "BTN_THR_UP" - shape: input - position: [1106.17, 350.52] - - name: "BTN_THR_DN" - shape: input - position: [1163.32, 350.52] - - name: "SPI_SCK" - shape: bidirectional - position: [751.84, 849.63] - - name: "SPI_MOSI" - shape: bidirectional - position: [784.86, 849.63] - - name: "SPI_MISO" - shape: bidirectional - position: [817.88, 849.63] - - name: "XBee_CS" - shape: bidirectional - position: [850.9, 849.63] - - name: "XBEE_ON_SLEEP" - shape: bidirectional - position: [883.92, 849.63] - - name: "XBEE_SPI_ATTN" - shape: bidirectional - position: [916.94, 849.63] - - name: "I2C_SDA" - shape: bidirectional - position: [949.96, 849.63] - - name: "I2C_SCL" - shape: bidirectional - position: [982.98, 849.63] - - name: "TRIG_ANALOG" - shape: input - position: [1016, 849.63] - - name: "STICK_X" - shape: input - position: [1049.02, 849.63] - - name: "STICK_Y" - shape: input - position: [1082.04, 849.63] - - name: "BTN_STICK" - shape: input - position: [1115.06, 849.63] - - name: "BTN_VOL_UP" - shape: input - position: [1148.08, 849.63] - - name: "BTN_VOL_DN" - shape: input - position: [1181.10, 849.63] - - name: "BTN_TRIG_DIG" - shape: input - position: [1214.12, 849.63] - - name: "BTN_MACRO1" - shape: input - position: [1247.14, 849.63] - - name: "BTN_MACRO2" - shape: input - position: [1280.16, 849.63] - - name: "BTN_MACRO3" - shape: input - position: [1313.18, 849.63] - - name: "BTN_MACRO4" - shape: input - position: [1346.20, 849.63] - - name: "BTN_MACRO5" - shape: input - position: [1379.22, 849.63] - - name: "BTN_MACRO6" - shape: input - position: [1412.24, 849.63] - XBee: - path: xbee - position: [350.52, 999.49] - size: [299.72, 200.66] - pins: - - name: "SPI_SCK" - shape: bidirectional - position: [387.35, 999.49] - - name: "SPI_MOSI" - shape: bidirectional - position: [433.07, 999.49] - - name: "SPI_MISO" - shape: bidirectional - position: [477.52, 999.49] - - name: "XBee_CS" - shape: bidirectional - position: [523.24, 999.49] - - name: "XBEE_ON_SLEEP" - shape: bidirectional - position: [567.69, 999.49] - - name: "XBEE_SPI_ATTN" - shape: bidirectional - position: [612.14, 999.49] - OLED: - path: oled - position: [699.77, 999.49] - size: [299.72, 200.66] - pins: - - name: "I2C_SDA" - shape: bidirectional - position: [782.32, 999.49] - - name: "I2C_SCL" - shape: bidirectional - position: [916.94, 999.49] - # Empty slot in the layout grid, left of XBee — same footprint size as - # its row-3 siblings. - Accelerometer: - path: accelerometer - position: [0, 999.49] - size: [299.72, 200.66] - pins: - - name: "I2C_SDA" - shape: bidirectional - position: [82.55, 999.49] - - name: "I2C_SCL" - shape: bidirectional - position: [217.17, 999.49] - Hall_Trigger: - path: hall_trigger - position: [1050.29, 999.49] - size: [299.72, 200.66] - pins: - - name: "TRIG_ANALOG" - shape: output - position: [1200.15, 999.49] - Thumbstick: - path: thumbstick - position: [1399.54, 999.49] - size: [300.99, 200.66] - pins: - - name: "STICK_X" - shape: output - position: [1459.23, 999.49] - - name: "STICK_Y" - shape: output - position: [1549.4, 999.49] - - name: "BTN_STICK" - shape: output - position: [1640.84, 999.49] - Buttons_Direct: - path: buttons_direct - position: [1750.06, 999.49] - size: [342.9, 200.66] - pins: - - name: "BTN_VOL_UP" - shape: output - position: [1769.11, 999.49] - - name: "BTN_VOL_DN" - shape: output - position: [1807.21, 999.49] - - name: "BTN_TRIG_DIG" - shape: output - position: [1845.31, 999.49] - - name: "BTN_MACRO1" - shape: output - position: [1883.41, 999.49] - - name: "BTN_MACRO2" - shape: output - position: [1921.51, 999.49] - - name: "BTN_MACRO3" - shape: output - position: [1959.61, 999.49] - - name: "BTN_MACRO4" - shape: output - position: [1997.71, 999.49] - - name: "BTN_MACRO5" - shape: output - position: [2035.81, 999.49] - - name: "BTN_MACRO6" - shape: output - position: [2073.91, 999.49] - - name: "BTN_THR_UP" - shape: output - position: [1769.11, 1200.15] - - name: "BTN_THR_DN" - shape: output - position: [1807.21, 1200.15] diff --git a/PCB/stackup/board.kdl b/PCB/stackup/board.kdl index caac2a9..03557d7 100644 --- a/PCB/stackup/board.kdl +++ b/PCB/stackup/board.kdl @@ -13,7 +13,6 @@ use "@stackup/passives" use "@stackup/power/buck/tlv62569" use "@stackup/power/charger/bq25185" use "@stackup/radio/xbee3" -use "@stackup/sensor/hall/drv5055" use "@stackup/switch/push-button" use "./parts.kdl"; use "./purchasing.kdl" @@ -94,11 +93,14 @@ design snips_controller { place push-button "SW_THR_DN1" designator="SW_THR_DN1" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" place push-button "SW_THR_UP1" designator="SW_THR_UP1" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" place push-button "SW_TRIG_DIG1" designator="SW_TRIG_DIG1" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" + // Mirror of SW_TRIG_DIG1 at the other end of the board's top edge, wired in parallel with it, so + // the bumper can be pressed from either side. + place push-button "SW_TRIG_DIG2" designator="SW_TRIG_DIG2" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" place push-button "SW_VOL_DN1" designator="SW_VOL_DN1" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" place push-button "SW_VOL_UP1" designator="SW_VOL_UP1" footprint="Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010" package="alps" value="SKRTLAE010" place tlv62569 "U_BUCK1" designator="U_BUCK1" footprint="Package_TO_SOT_SMD:SOT-23-5" value="TLV62569DBVR" place bq25185 "U_CHG1" designator="U_CHG1" footprint="BQ25185DLHR:IC_BQ25185DLHR" value="BQ25185DLHR" { without program; without always-enabled; without ts-fixed; without thermal; without supply } - place drv5055a2 "U_HALL1" designator="U_HALL1" footprint="Package_TO_SOT_THT:TO-92_Inline" value="DRV5055A2QLPGM" hand=#true { without supply } + place drv5055a2-sot23 "U_HALL1" designator="U_HALL1" footprint="Package_TO_SOT_SMD:SOT-23" value="DRV5055A2QDBZR" place icm42670p "U_IMU1" designator="U_IMU1" footprint="Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y" value="ICM-42670-P" place esp32-s3-wroom-1 "U_MCU1" designator="U_MCU1" footprint="Espressif:ESP32-S3-WROOM-1" package="n8" value="ESP32-S3-WROOM-1-N8" { without supply; without enable; without boot } place qwiic "U_OLED1" designator="U_OLED1" footprint="Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal" value="Qwiic connector" { without tab } @@ -115,7 +117,7 @@ design snips_controller { circuit "SW_MACRO6.1" "U_MCU1.IO38" name="/Buttons_Direct/BTN_MACRO6" circuit "SW_THR_DN1.1" "U_MCU1.IO17" name="/Buttons_Direct/BTN_THR_DN" circuit "SW_THR_UP1.1" "U_MCU1.IO16" name="/Buttons_Direct/BTN_THR_UP" - circuit "SW_TRIG_DIG1.1" "U_MCU1.IO18" name="/Buttons_Direct/BTN_TRIG_DIG" + circuit "SW_TRIG_DIG1.1" "SW_TRIG_DIG2.1" "U_MCU1.IO18" name="/Buttons_Direct/BTN_TRIG_DIG" circuit "SW_VOL_DN1.1" "U_MCU1.IO39" name="/Buttons_Direct/BTN_VOL_DN" circuit "SW_VOL_UP1.1" "U_MCU1.IO40" name="/Buttons_Direct/BTN_VOL_UP" circuit "U_HALL1.OUT" "U_MCU1.IO4" name="/Hall_Trigger/TRIG_ANALOG" @@ -158,7 +160,7 @@ design snips_controller { circuit "C_3V3_1.A" "C_3V3_2.A" "C_3V3_3.A" "C_BUCK_OUT1.A" "C_HALL1.A" "C_IMU_1.A" "C_IMU_2.A" "C_IMU_3.A" "C_OLED_1.A" "C_OLED_2.A" "C_RGB1.A" "C_STICK1.A" "C_XBEE_VCC1.A" "C_XBEE_VCC2.A" "C_XBEE_VCC3.A" "C_XBEE_VCC4.A" "D_RGB1.VDD" "J_STICK1.p_3" "J_STICK1.p_3_" "L_BUCK1.B" "R_BOOT_PU1.B" "R_BTN_PU1.A" "R_EN_PU1.B" "R_FB1.B" "R_STAT1.B" "R_STAT2.B" "R_XBEE_ATTN_PU1.A" "R_XBEE_RST1.A" "U_HALL1.VCC" "U_IMU1.AP_CS" "U_IMU1.VDD" "U_IMU1.VDDIO" "U_MCU1.3V3" "U_OLED1.2" "U_XBEE1.VCC" name="3V3" set "C_BUCK_OUT1.A" net.voltage "3.3V" circuit "U_IMU1.INT1" "U_MCU1.IO46" name="ACCEL_INT1" - circuit "BT1.2" "C_3V3_1.B" "C_3V3_2.B" "C_3V3_3.B" "C_BAT1.B" "C_BUCK_IN1.B" "C_BUCK_OUT1.B" "C_DBNC1.B" "C_HALL1.B" "C_IMU_1.B" "C_IMU_2.B" "C_IMU_3.B" "C_LATCH_G1.A" "C_OLED_1.B" "C_OLED_2.B" "C_RGB1.B" "C_STICK1.B" "C_SYS_1.B" "C_SYS_2.B" "C_VIN_1.B" "C_VIN_2.B" "C_XBEE_RC1.B" "C_XBEE_VCC1.B" "C_XBEE_VCC2.B" "C_XBEE_VCC3.B" "C_XBEE_VCC4.B" "D_RGB1.GND" "D_VBUS_TVS1.A2" "J_STICK1.p_1" "J_STICK1.p_1_" "J_STICK1.p_c" "J_USB1.GND" "J_USB1.SHIELD" "Q_INV1.EMITTER" "Q_LATCH1.SOURCE" "R_CC1.B" "R_CC2.B" "R_FB2.B" "R_ISET1.B" "R_LATCH_G1.A" "R_PWR_EN_PD1.rail.gnd" "R_TS1.B" "R_VSET1.B" "R_VSYS2.B" "SW_BOOT1.1" "SW_MACRO1.2" "SW_MACRO2.2" "SW_MACRO3.2" "SW_MACRO4.2" "SW_MACRO5.2" "SW_MACRO6.2" "SW_PWR1.2" "SW_THR_DN1.2" "SW_THR_UP1.2" "SW_TRIG_DIG1.2" "SW_VOL_DN1.2" "SW_VOL_UP1.2" "U_BUCK1.GND" "U_CHG1.PAD" "U_CHG1.CE" "U_CHG1.GND" "U_HALL1.GND" "U_IMU1.AP_AD0" "U_IMU1.FSYNC" "U_IMU1.GND" "U_IMU1.RESV2" "U_IMU1.RESV3" "U_IMU1.RESV10" "U_IMU1.RESV11" "U_MCU1.GND" "U_OLED1.1" "U_XBEE1.GND" name="GND" + circuit "BT1.2" "C_3V3_1.B" "C_3V3_2.B" "C_3V3_3.B" "C_BAT1.B" "C_BUCK_IN1.B" "C_BUCK_OUT1.B" "C_DBNC1.B" "C_HALL1.B" "C_IMU_1.B" "C_IMU_2.B" "C_IMU_3.B" "C_LATCH_G1.A" "C_OLED_1.B" "C_OLED_2.B" "C_RGB1.B" "C_STICK1.B" "C_SYS_1.B" "C_SYS_2.B" "C_VIN_1.B" "C_VIN_2.B" "C_XBEE_RC1.B" "C_XBEE_VCC1.B" "C_XBEE_VCC2.B" "C_XBEE_VCC3.B" "C_XBEE_VCC4.B" "D_RGB1.GND" "D_VBUS_TVS1.A2" "J_STICK1.p_1" "J_STICK1.p_1_" "J_STICK1.p_c" "J_USB1.GND" "J_USB1.SHIELD" "Q_INV1.EMITTER" "Q_LATCH1.SOURCE" "R_CC1.B" "R_CC2.B" "R_FB2.B" "R_ISET1.B" "R_LATCH_G1.A" "R_PWR_EN_PD1.rail.gnd" "R_TS1.B" "R_VSET1.B" "R_VSYS2.B" "SW_BOOT1.1" "SW_MACRO1.2" "SW_MACRO2.2" "SW_MACRO3.2" "SW_MACRO4.2" "SW_MACRO5.2" "SW_MACRO6.2" "SW_PWR1.2" "SW_THR_DN1.2" "SW_THR_UP1.2" "SW_TRIG_DIG1.2" "SW_TRIG_DIG2.2" "SW_VOL_DN1.2" "SW_VOL_UP1.2" "U_BUCK1.GND" "U_CHG1.PAD" "U_CHG1.CE" "U_CHG1.GND" "U_HALL1.GND" "U_IMU1.AP_AD0" "U_IMU1.FSYNC" "U_IMU1.GND" "U_IMU1.RESV2" "U_IMU1.RESV3" "U_IMU1.RESV10" "U_IMU1.RESV11" "U_MCU1.GND" "U_OLED1.1" "U_XBEE1.GND" name="GND" circuit "BT1.1" "C_BAT1.A" "U_CHG1.BAT" name="VBAT" circuit "C_VIN_1.A" "C_VIN_2.A" "D_VBUS_TVS1.A1" "J_USB1.VBUS" "U_CHG1.IN" name="VBUS" circuit "C_BUCK_IN1.A" "C_SYS_1.A" "C_SYS_2.A" "Q_PWR1.SOURCE" "R_GATE1.A" "R_INV_BASE1.A" "R_INV_PU1.A" "R_VSYS1.A" "U_BUCK1.VIN" "U_CHG1.SYS" name="VSYS" @@ -324,9 +326,9 @@ design snips_controller { set mpn="BQ25185DLHR" } match placement { - when value="DRV5055A2QLPGM" - when footprint="Package_TO_SOT_THT:TO-92_Inline" - set mpn="DRV5055A2QLPGM" + when value="DRV5055A2QDBZR" + when footprint="Package_TO_SOT_SMD:SOT-23" + set mpn="DRV5055A2QDBZR" } match placement { when value="ESP32-S3-WROOM-1-N8" diff --git a/PCB/stackup/parts.kdl b/PCB/stackup/parts.kdl index c7821bb..526f200 100644 --- a/PCB/stackup/parts.kdl +++ b/PCB/stackup/parts.kdl @@ -141,3 +141,38 @@ part icm42670p { port int1 pin=INT1 port int2 pin=INT2 } + +// TI DRV5055A2 in SOT-23 (DBZ). The @stackup/sensor/hall/drv5055 library part has only the TO-92 +// package, and the SOT-23 pin order differs (DS SBAS639E, Table 4-1). It is mounted on the bottom +// of the board under the trigger magnet and reads the field perpendicular to the board (§6.3.1). +part drv5055a2-sot23 { + symbol "Sensor_Magnetic:DRV5055A2xDBZxQ1" + reference U + value "DRV5055A2QDBZR" + datasheet "https://www.ti.com/lit/ds/symlink/drv5055.pdf" + description "Ratiometric linear Hall effect sensor, 50mV/mT, 3.3V/5V, SOT-23" + manufacturer "Texas Instruments" + order mpn=DRV5055A2QDBZR lcsc=C266131 + + pin VCC power_in + pin GND power_in + pin OUT output + + package sot23 footprint="Package_TO_SOT_SMD:SOT-23" { + pad VCC 1 + pad OUT 2 + pad GND 3 + } + + // Maximum supply current: 10 mA. The datasheet's 3.0–3.63 V and 4.5–5.5 V ranges are checked + // only at the outer limits, as in the library part. + port vcc type=power { + require net.voltage min="3.0V" max="5.5V" + add net.draw "10mA" + line rail pin=VCC + line gnd pin=GND + } + + // Analog output proportional to the supply voltage, for an ADC input. + port out type=analog pin=OUT +} diff --git a/PCB/stackup/purchasing.kdl b/PCB/stackup/purchasing.kdl index 92e2961..f45b95a 100644 --- a/PCB/stackup/purchasing.kdl +++ b/PCB/stackup/purchasing.kdl @@ -93,7 +93,9 @@ mpn "CL21A226MAQNNNE" manufacturer="Samsung Electro-Mechanics" value="22µF" foo catalog lcsc="C45783" } -mpn "DRV5055A2QLPGM" manufacturer="Texas Instruments" value="DRV5055A2QLPGM" footprint="Package_TO_SOT_THT:TO-92_Inline" +mpn "DRV5055A2QDBZR" manufacturer="Texas Instruments" value="DRV5055A2QDBZR" footprint="Package_TO_SOT_SMD:SOT-23" { + catalog lcsc="C266131" +} mpn "ESP32-S3-WROOM-1-N8" manufacturer="Espressif Systems" value="ESP32-S3-WROOM-1-N8" footprint="Espressif:ESP32-S3-WROOM-1" { catalog lcsc="C2913198" mouser="356-ESP32S3WROOM1N8" diff --git a/include/calibration.h b/include/calibration.h index a9e89c0..155df7c 100644 --- a/include/calibration.h +++ b/include/calibration.h @@ -37,6 +37,9 @@ struct CalibrationData { class AnalogCalibration { public: // Raw trigger ADC -> 0-100 (0 = released, 100 = fully pulled). + // triggerMin is the released reading and triggerMax the fully pulled one; + // triggerMax may be the lower of the two, since the hall sensor's output + // falls instead of rising when the magnet's other pole faces it. static int calibrateTrigger(int raw, const CalibrationData &data); // Raw stick-axis ADC -> -100..100 (0 = center), with a deadzone around diff --git a/include/low_battery.h b/include/low_battery.h index ab688aa..8dfb226 100644 --- a/include/low_battery.h +++ b/include/low_battery.h @@ -91,7 +91,7 @@ void renderBatteryEmptyScreen(ScreenBuffer *screen); // ILIM/ISET pin short, or safety timer expired — see bq25185 datasheet // Table 7-2). Per that datasheet, the *only* way to clear this fault is // toggling the CE pin or input power — this board's CE is hardwired to -// GND (always-enable, no firmware control — see -// PCB/snips_controller.yaml's Power_Charger section), so unplugging and +// GND (always-enable, no firmware control — see the GND net in +// PCB/stackup/board.kdl), so unplugging and // replugging the charge cable is the only recovery a user actually has. void renderChargingFaultScreen(ScreenBuffer *screen); diff --git a/src/calibration.cpp b/src/calibration.cpp index 4636f6c..5dae6c3 100644 --- a/src/calibration.cpp +++ b/src/calibration.cpp @@ -51,8 +51,8 @@ int prevDeadzonePercent(int currentPercent) { } int AnalogCalibration::calibrateTrigger(int raw, const CalibrationData &data) { - if (data.triggerMax <= data.triggerMin) { - return 0; // uncalibrated/degenerate range + if (data.triggerMax == data.triggerMin) { + return 0; // degenerate range } const float percent = static_cast(raw - data.triggerMin) / (data.triggerMax - data.triggerMin) * 100.0f; diff --git a/test/test_calibration/test_calibration.cpp b/test/test_calibration/test_calibration.cpp index d426ce7..d6aef51 100644 --- a/test/test_calibration/test_calibration.cpp +++ b/test/test_calibration/test_calibration.cpp @@ -39,6 +39,37 @@ void test_trigger_degenerate_range_returns_zero() { TEST_ASSERT_EQUAL_INT(0, AnalogCalibration::calibrateTrigger(2048, data)); } +// Regression: a reversed magnet makes the pulled reading lower than the +// released one, which used to be treated as uncalibrated and read 0. +void test_trigger_inverted_range_maps_released_to_zero() { + CalibrationData data; + data.triggerMin = 3000; + data.triggerMax = 1000; + TEST_ASSERT_EQUAL_INT(0, AnalogCalibration::calibrateTrigger(3000, data)); +} + +void test_trigger_inverted_range_maps_pulled_to_hundred() { + CalibrationData data; + data.triggerMin = 3000; + data.triggerMax = 1000; + TEST_ASSERT_EQUAL_INT(100, AnalogCalibration::calibrateTrigger(1000, data)); +} + +void test_trigger_inverted_range_midpoint_is_fifty_percent() { + CalibrationData data; + data.triggerMin = 3000; + data.triggerMax = 1000; + TEST_ASSERT_EQUAL_INT(50, AnalogCalibration::calibrateTrigger(2000, data)); +} + +void test_trigger_inverted_range_clamps_both_ends() { + CalibrationData data; + data.triggerMin = 3000; + data.triggerMax = 1000; + TEST_ASSERT_EQUAL_INT(0, AnalogCalibration::calibrateTrigger(3500, data)); + TEST_ASSERT_EQUAL_INT(100, AnalogCalibration::calibrateTrigger(500, data)); +} + // ---- AnalogCalibration::calibrateStickAxis -------------------------------- void test_stick_axis_at_center_is_zero() { @@ -284,6 +315,10 @@ int main(int argc, char **argv) { RUN_TEST(test_trigger_clamps_beyond_max); RUN_TEST(test_trigger_clamps_below_min); RUN_TEST(test_trigger_degenerate_range_returns_zero); + RUN_TEST(test_trigger_inverted_range_maps_released_to_zero); + RUN_TEST(test_trigger_inverted_range_maps_pulled_to_hundred); + RUN_TEST(test_trigger_inverted_range_midpoint_is_fifty_percent); + RUN_TEST(test_trigger_inverted_range_clamps_both_ends); RUN_TEST(test_stick_axis_at_center_is_zero); RUN_TEST(test_stick_axis_within_deadzone_is_zero); RUN_TEST(test_stick_axis_just_outside_deadzone_is_nonzero); From 39890d22422439d2bcf3768b5e6a8df2f5301643 Mon Sep 17 00:00:00 2001 From: Jessica Janiuk Date: Thu, 29 Oct 2026 18:50:10 -0700 Subject: [PATCH 2/3] Regenerate V1.2 production files Picks up SW_TRIG_DIG2, the bottom-side SOT-23 hall sensor (now in the BOM with LCSC C266131), the moved top mounting holes (MH1, MH2) and the rest of the layout changes. Co-Authored-By: Claude Opus 5.5 --- PCB/production/bom/snips_controller-bom.csv | 9 +- .../gerbers/snips_controller-B_Cu.gbr | 469 +-- .../gerbers/snips_controller-B_Mask.gbr | 57 +- .../gerbers/snips_controller-B_Paste.gbr | 25 +- .../gerbers/snips_controller-B_Silkscreen.gbr | 111 +- .../gerbers/snips_controller-Edge_Cuts.gbr | 4 +- .../gerbers/snips_controller-F_Cu.gbr | 1104 +++--- .../gerbers/snips_controller-F_Mask.gbr | 258 +- .../gerbers/snips_controller-F_Paste.gbr | 208 +- .../gerbers/snips_controller-F_Silkscreen.gbr | 183 +- .../gerbers/snips_controller-In1_Cu.gbr | 3115 ++++++++--------- .../gerbers/snips_controller-In2_Cu.gbr | 2696 +++++++------- .../gerbers/snips_controller-NPTH.drl | 14 +- .../gerbers/snips_controller-PTH.drl | 44 +- .../gerbers/snips_controller-job.gbrjob | 2 +- PCB/production/gerbers/snips_controller.zip | Bin 184611 -> 183736 bytes PCB/production/jlcpcb/Snips_1_2.zip | Bin 336355 -> 336901 bytes PCB/production/jlcpcb/netlist.ipc | 116 +- .../placement/snips_controller-all.pos | 27 +- .../placement/snips_controller-pnp_bottom.gbr | 79 +- .../placement/snips_controller-pnp_top.gbr | 248 +- 21 files changed, 4375 insertions(+), 4394 deletions(-) diff --git a/PCB/production/bom/snips_controller-bom.csv b/PCB/production/bom/snips_controller-bom.csv index 8ddbc36..c946683 100644 --- a/PCB/production/bom/snips_controller-bom.csv +++ b/PCB/production/bom/snips_controller-bom.csv @@ -32,9 +32,10 @@ 31;"R_XBEE_RC1";"R_0402_1005Metric";1;"100Ω";;; 32;"SW_BOOT1";"SW_SPST_EVQP2_ShortPushTravel_H2.1mm";1;"Panasonic_EVQP2";;; 33;"SW_MACRO1, SW_MACRO2, SW_MACRO3, SW_MACRO4, SW_MACRO5, SW_MACRO6";"SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm";6;"6x6x5mm SMD Tactile";;; -34;"SW_PWR1, SW_THR_DN1, SW_THR_UP1, SW_TRIG_DIG1, SW_VOL_DN1, SW_VOL_UP1";"SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010";6;"SKRTLAE010";;; +34;"SW_PWR1, SW_THR_DN1, SW_THR_UP1, SW_TRIG_DIG1, SW_TRIG_DIG2, SW_VOL_DN1, SW_VOL_UP1";"SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010";7;"SKRTLAE010";;; 35;"U_BUCK1";"SOT-23-5";1;"TLV62569DBVR";;; 36;"U_CHG1";"IC_BQ25185DLHR";1;"BQ25185DLHR";;; -37;"U_IMU1";"LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y";1;"ICM-42670-P";;; -38;"U_MCU1";"ESP32-S3-WROOM-1";1;"ESP32-S3-WROOM-1-N8";;; -39;"U_OLED1";"JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal";1;"Qwiic connector";;; +37;"U_HALL1";"SOT-23";1;"DRV5055A2QDBZR";;; +38;"U_IMU1";"LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y";1;"ICM-42670-P";;; +39;"U_MCU1";"ESP32-S3-WROOM-1";1;"ESP32-S3-WROOM-1-N8";;; +40;"U_OLED1";"JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal";1;"Qwiic connector";;; diff --git a/PCB/production/gerbers/snips_controller-B_Cu.gbr b/PCB/production/gerbers/snips_controller-B_Cu.gbr index 9b9696a..50f6840 100644 --- a/PCB/production/gerbers/snips_controller-B_Cu.gbr +++ b/PCB/production/gerbers/snips_controller-B_Cu.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Copper,L4,Bot*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -99,7 +99,7 @@ G04 Aperture macros list end* %ADD29RoundRect,0.087500X0.087500X0.225000X-0.087500X0.225000X-0.087500X-0.225000X0.087500X-0.225000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD30RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD30RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% %ADD31C,1.000000*% @@ -119,41 +119,35 @@ G04 Aperture macros list end* %TA.AperFunction,SMDPad,CuDef*% %ADD36RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% %TD*% -%TA.AperFunction,ComponentPad*% -%ADD37R,1.050000X1.500000*% -%TD*% -%TA.AperFunction,ComponentPad*% -%ADD38O,1.050000X1.500000*% -%TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD39RoundRect,0.225000X0.375000X-0.225000X0.375000X0.225000X-0.375000X0.225000X-0.375000X-0.225000X0*% +%ADD37RoundRect,0.225000X0.375000X-0.225000X0.375000X0.225000X-0.375000X0.225000X-0.375000X-0.225000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD40RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% +%ADD38RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD41RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% +%ADD39RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD42RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% +%ADD40RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD43R,1.500000X3.600000*% +%ADD41R,1.500000X3.600000*% %TD*% %TA.AperFunction,ViaPad*% -%ADD44C,0.600000*% +%ADD42C,0.600000*% %TD*% %TA.AperFunction,Conductor*% -%ADD45C,0.300000*% +%ADD43C,0.300000*% %TD*% %TA.AperFunction,Conductor*% -%ADD46C,0.200000*% +%ADD44C,0.200000*% %TD*% %TA.AperFunction,Conductor*% -%ADD47C,0.550000*% +%ADD45C,0.550000*% %TD*% %TA.AperFunction,Conductor*% -%ADD48C,0.800000*% +%ADD46C,0.800000*% %TD*% G04 APERTURE END LIST* D10* @@ -419,10 +413,10 @@ X146450000Y-120760000D03* D30* %TO.P,C_HALL1,1*% %TO.N,3V3*% -X152000000Y-66000000D03* +X139500000Y-73480000D03* %TO.P,C_HALL1,2*% %TO.N,GND*% -X151040000Y-66000000D03* +X139500000Y-72520000D03* %TD*% D16* %TO.P,R_INV_BASE1,1*% @@ -542,18 +536,6 @@ D31* X125900000Y-95300000D03* %TD*% D37* -%TO.P,U_HALL1,1,VCC_1*% -%TO.N,3V3*% -X152700000Y-63000000D03* -D38* -%TO.P,U_HALL1,2,GND_2*% -%TO.N,GND*% -X151430000Y-63000000D03* -%TO.P,U_HALL1,3,OUT_3*% -%TO.N,/Hall_Trigger/TRIG_ANALOG*% -X150160000Y-63000000D03* -%TD*% -D39* %TO.P,D_OR2,1,K_1*% %TO.N,/Power_Control/PWR_LATCH_G*% X144000000Y-121650000D03* @@ -569,7 +551,7 @@ X146000000Y-123510000D03* %TO.N,/Power_Control/PWR_LATCH_G*% X146000000Y-122490000D03* %TD*% -D40* +D38* %TO.P,R_FB2,1*% %TO.N,/Power_Buck/BUCK_FB*% X122525000Y-114740000D03* @@ -585,7 +567,7 @@ X126020000Y-122500000D03* %TO.N,GND*% X125000000Y-122500000D03* %TD*% -D30* +D39* %TO.P,C_IMU_3,1*% %TO.N,3V3*% X141760000Y-79400000D03* @@ -616,7 +598,7 @@ X122525000Y-113760000D03* %TO.N,3V3*% X122525000Y-112740000D03* %TD*% -D41* +D40* %TO.P,U_BUCK1,1,EN_1*% %TO.N,/Power_Buck/PWR_EN*% X132425000Y-110000000D03* @@ -633,7 +615,7 @@ X130525000Y-107725000D03* %TO.N,/Power_Buck/BUCK_FB*% X132425000Y-107725000D03* %TD*% -D42* +D30* %TO.P,C_IMU_1,1*% %TO.N,3V3*% X138800000Y-77655000D03* @@ -641,7 +623,7 @@ X138800000Y-77655000D03* %TO.N,GND*% X138800000Y-76695000D03* %TD*% -D43* +D41* %TO.P,L_BUCK1,1,1_1*% %TO.N,/Power_Buck/BUCK_SW*% X128050000Y-110000000D03* @@ -650,6 +632,16 @@ X128050000Y-110000000D03* X125000000Y-110000000D03* %TD*% D18* +%TO.P,U_HALL1,1*% +%TO.N,3V3*% +X136900000Y-72100000D03* +%TO.P,U_HALL1,2*% +%TO.N,/Hall_Trigger/TRIG_ANALOG*% +X136900000Y-70200000D03* +%TO.P,U_HALL1,3*% +%TO.N,GND*% +X138775000Y-71150000D03* +%TD*% %TO.P,Q_INV1,1,B_1*% %TO.N,/Power_Control/PWR_BTN_INV_BASE*% X145850000Y-126850000D03* @@ -668,27 +660,28 @@ X126020000Y-124000000D03* %TO.N,GND*% X125000000Y-124000000D03* %TD*% -D44* +D42* %TO.N,3V3*% +X140900000Y-72900000D03* X139342332Y-122557668D03* X122500000Y-107500000D03* X127110000Y-120400000D03* X151500000Y-153000000D03* +X122600000Y-86300000D03* X135500000Y-88000000D03* X149550000Y-132950000D03* X148000000Y-91500000D03* X142800000Y-79400000D03* X138600000Y-146500000D03* -X130750000Y-65000000D03* +X130800000Y-65900000D03* X137400000Y-79200000D03* -X126200000Y-78000000D03* X147500000Y-83000000D03* X140000000Y-75450000D03* %TO.N,XBEE_SLEEP_RQ*% X145400000Y-70950000D03* X131100000Y-87350000D03* %TO.N,GND*% -X121500000Y-67000000D03* +X123200000Y-64500000D03* X142500000Y-121250000D03* X133020634Y-117700000D03* X147500000Y-119000000D03* @@ -699,7 +692,7 @@ X138800000Y-75600000D03* X147500000Y-96500000D03* X126000000Y-153000000D03* X125000000Y-118000000D03* -X130750000Y-63750000D03* +X130800000Y-64700000D03* X121500000Y-112000000D03* X124000000Y-129000000D03* X128750000Y-121250000D03* @@ -708,7 +701,7 @@ X152750000Y-112500000D03* X133020634Y-120500000D03* X131050000Y-111200000D03* X135000000Y-104000000D03* -X124088235Y-90338235D03* +X124088235Y-90513235D03* X128000000Y-105500000D03* X139500000Y-118500000D03* X149800000Y-150800000D03* @@ -718,11 +711,11 @@ X145000000Y-123500000D03* X145250000Y-65100000D03* X123500000Y-124000000D03* X123500000Y-115500000D03* -X124400000Y-84800000D03* +X140700000Y-71800000D03* X152500000Y-121250000D03* +X124400000Y-88000000D03* X145800000Y-153300000D03* X150500000Y-90500000D03* -X139250000Y-73750000D03* X129000000Y-119000000D03* X150500000Y-100500000D03* X143600000Y-77200000D03* @@ -742,6 +735,9 @@ X128574265Y-102574265D03* %TO.N,/Buttons_Direct/BTN_MACRO2*% X143500000Y-84500000D03* X135816422Y-93425941D03* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X126700000Y-76900000D03* +X121700000Y-64100000D03* %TO.N,/Buttons_Direct/BTN_MACRO5*% X144000000Y-87000000D03* X133500000Y-116400000D03* @@ -753,20 +749,17 @@ X145000000Y-77000000D03* %TO.N,/Buttons_Direct/BTN_MACRO3*% X145500000Y-80500000D03* X145000000Y-109500000D03* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X127200000Y-75000000D03* -X122000000Y-63000000D03* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X130800000Y-67800000D03* +X133950000Y-70900000D03* %TO.N,/MCU_Core/STICK_X*% X137500000Y-81000000D03* %TO.N,/MCU_Core/STICK_Y*% X134800000Y-80752983D03* %TO.N,/MCU_Core/VSYS_SENSE*% -X123900000Y-71100000D03* -X127500000Y-71300000D03* +X125700000Y-73500000D03* +X126758949Y-84000000D03* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X125250000Y-90500000D03* +X125900000Y-90500000D03* X128000000Y-75500000D03* %TO.N,/Buttons_Direct/BTN_THR_DN*% X125340812Y-100424593D03* @@ -776,9 +769,9 @@ X133350000Y-76350000D03* %TO.N,ACCEL_INT1*% X133400000Y-80400000D03* %TO.N,/Accelerometer/I2C_SCL*% -X125374880Y-71699999D03* -X133350000Y-77150003D03* -X130900000Y-76950000D03* +X130950000Y-77200000D03* +X127624265Y-74175735D03* +X133350000Y-78800000D03* %TO.N,/MCU_Core/BTN_STICK*% X141300000Y-98800000D03* %TO.N,/Buttons_Direct/BTN_MACRO1*% @@ -813,7 +806,7 @@ X148544265Y-73955735D03* X125307179Y-152600000D03* X154400000Y-85000000D03* %TO.N,/MCU_Core/STAT1*% -X133250000Y-71850000D03* +X133350000Y-70000000D03* X128100000Y-103700000D03* X126624265Y-119724265D03* %TO.N,VBUS*% @@ -821,7 +814,7 @@ X135470098Y-154243783D03* X139556798Y-154232791D03* %TO.N,VSYS*% X142200000Y-119500000D03* -X124600000Y-88100000D03* +X124659759Y-89061229D03* X136200000Y-116100000D03* X143600000Y-124150000D03* X136275000Y-108200000D03* @@ -834,10 +827,10 @@ X143000000Y-114500000D03* X133850000Y-111000000D03* %TD*% %TO.N,3V3*% -D45* +D43* X127510000Y-120000000D02* X127110000Y-120400000D01* -D46* +D44* X138800000Y-77655000D02* X139207500Y-78062500D01* X149170000Y-133330000D02* @@ -846,37 +839,37 @@ X149170000Y-133700000D02* X149170000Y-133330000D01* X141760000Y-79400000D02* X141800000Y-79360000D01* -D47* +D45* X122025000Y-109050000D02* X122025000Y-107975000D01* +D44* +X139500000Y-73480000D02* +X140320000Y-73480000D01* +D45* X125000000Y-110000000D02* X123500000Y-110000000D01* -D46* +D44* X140800000Y-76400000D02* X140800000Y-76250000D01* X138505000Y-77950000D02* X138800000Y-77655000D01* X138110000Y-122800000D02* X139100000Y-122800000D01* -X152000000Y-66000000D02* -X152700000Y-65300000D01* +X138280000Y-73480000D02* +X136900000Y-72100000D01* X139100000Y-122800000D02* X139342332Y-122557668D01* -X152700000Y-65300000D02* -X152700000Y-63000000D01* X140800000Y-76250000D02* X140000000Y-75450000D01* X137400000Y-77950000D02* X138505000Y-77950000D01* -D45* +D43* X127510000Y-120000000D02* X127900000Y-120000000D01* -D46* +D44* X137400000Y-77950000D02* X137400000Y-79200000D01* -X152750000Y-63641726D02* -X152750000Y-63000000D01* -D47* +D45* X123500000Y-110000000D02* X123500000Y-111765000D01* X123500000Y-110000000D02* @@ -885,51 +878,51 @@ X122975000Y-110000000D02* X122025000Y-109050000D01* X122025000Y-107975000D02* X122500000Y-107500000D01* -D46* +D44* X139207500Y-78062500D02* X140137500Y-78062500D01* -D47* +X140320000Y-73480000D02* +X140900000Y-72900000D01* +D45* X123500000Y-111765000D02* X122525000Y-112740000D01* -D46* +D44* +X139500000Y-73480000D02* +X138280000Y-73480000D01* X141760000Y-79400000D02* X142800000Y-79400000D01* X141800000Y-79360000D02* X141800000Y-78225000D01* %TO.N,XBEE_SLEEP_RQ*% -X131100000Y-81050000D02* -X131300000Y-80850000D01* -X132834315Y-69400000D02* -X144948529Y-69400000D01* -X131950000Y-80101471D02* -X131950000Y-70284315D01* -X131300000Y-80850000D02* -X131300000Y-80751471D01* X131950000Y-70284315D02* -X132834315Y-69400000D01* +X133434315Y-68800000D01* X131100000Y-87350000D02* -X131100000Y-81050000D01* -X144948529Y-69400000D02* -X145400000Y-69851471D01* -X131300000Y-80751471D02* -X131950000Y-80101471D01* +X131600000Y-86850000D01* X145400000Y-69851471D02* X145400000Y-70950000D01* +X131600000Y-80451471D02* +X131950000Y-80101471D01* +X131600000Y-86850000D02* +X131600000Y-80451471D01* +X133434315Y-68800000D02* +X144348529Y-68800000D01* +X131950000Y-80101471D02* +X131950000Y-70284315D01* +X144348529Y-68800000D02* +X145400000Y-69851471D01* %TO.N,GND*% X125000000Y-122500000D02* X125000000Y-124000000D01* -X151430000Y-63000000D02* -X151430000Y-65610000D01* X143237500Y-77562500D02* X143600000Y-77200000D01* X134700000Y-119750000D02* X134650000Y-119800000D01* X140137500Y-76562500D02* X138932500Y-76562500D01* -D45* +D43* X123240000Y-115760000D02* X123500000Y-115500000D01* -D46* +D44* X151800000Y-113450000D02* X152750000Y-112500000D01* X138932500Y-76562500D02* @@ -938,42 +931,50 @@ X133000000Y-119000000D02* X133136397Y-119000000D01* X143462500Y-77062500D02* X143600000Y-77200000D01* -D45* +D43* X137000000Y-119000000D02* X135970000Y-117970000D01* -D46* +D44* X134700000Y-119450000D02* X134650000Y-119400000D01* -D45* +D43* X129550000Y-105500000D02* X128000000Y-105500000D01* -D46* +D44* +X140220000Y-71800000D02* +X140700000Y-71800000D01* X151800000Y-113840000D02* X151800000Y-113450000D01* -D45* +X139500000Y-71875000D02* +X138775000Y-71150000D01* +D43* X131475000Y-110000000D02* X131475000Y-110775000D01* -D46* +D44* X138000000Y-76400000D02* X138800000Y-75600000D01* -D45* +D43* X122025000Y-111475000D02* X121500000Y-112000000D01* -D46* +D44* X145850000Y-124950000D02* X145850000Y-124350000D01* X142462500Y-77562500D02* X143237500Y-77562500D01* -D45* +D43* X131475000Y-110775000D02* X131050000Y-111200000D01* -D46* +D44* +X140220000Y-71800000D02* +X139500000Y-72520000D01* X125000000Y-122500000D02* X125000000Y-121020000D01* -D45* +D43* X138400000Y-120500000D02* X139000000Y-120500000D01* -D46* +D44* +X139500000Y-72520000D02* +X139500000Y-71875000D01* X131200000Y-111200000D02* X131050000Y-111200000D01* X140800000Y-79400000D02* @@ -990,10 +991,10 @@ X148500000Y-120000000D02* X147500000Y-119000000D01* X141300000Y-78225000D02* X140800000Y-78225000D01* -D45* +D43* X122525000Y-115760000D02* X123240000Y-115760000D01* -D46* +D44* X140137500Y-76562500D02* X140137500Y-77062500D01* X133450000Y-119313603D02* @@ -1006,40 +1007,40 @@ X142462500Y-76562500D02* X142962500Y-76562500D01* X125000000Y-124000000D02* X123500000Y-124000000D01* -D45* +D43* X139900000Y-117000000D02* X139900000Y-118100000D01* -D46* +D44* X146700000Y-119800000D02* X147500000Y-119000000D01* X126100000Y-118000000D02* X125000000Y-118000000D01* -D45* +D43* X122025000Y-110950000D02* X122025000Y-111475000D01* -D46* +D44* X146450000Y-119800000D02* X146700000Y-119800000D01* X145130000Y-153970000D02* X145800000Y-153300000D01* X138800000Y-76695000D02* X138800000Y-75600000D01* -D45* +D43* X139000000Y-120500000D02* X139500000Y-120000000D01* X139900000Y-118100000D02* X139500000Y-118500000D01* X129000000Y-119000000D02* X130000000Y-119000000D01* -D46* +D44* X133450000Y-118686397D02* X133450000Y-118129366D01* X145850000Y-124350000D02* X145000000Y-123500000D01* -D45* +D43* X135970000Y-117970000D02* X135500000Y-117970000D01* -D46* +D44* X133450000Y-120070634D02* X133020634Y-120500000D01* X137400000Y-76400000D02* @@ -1060,8 +1061,6 @@ X125000000Y-121020000D02* X125020000Y-121000000D01* X134650000Y-119800000D02* X134050000Y-119800000D01* -X151430000Y-65610000D02* -X151040000Y-66000000D01* X140800000Y-79400000D02* X140800000Y-78225000D01* %TO.N,/MCU_Core/XBEE_ON_SLEEP*% @@ -1089,28 +1088,32 @@ X143015500Y-136984500D01* X141736134Y-125800000D02* X136600000Y-125800000D01* %TO.N,/XBee/XBEE_SPI_ATTN*% -X128400000Y-97931091D02* -X126300000Y-100031091D01* -X131550000Y-79450000D02* -X128400000Y-82600000D01* -X131250000Y-73900000D02* -X131550000Y-74200000D01* X123284500Y-132484500D02* X123184500Y-132484500D01* X127400000Y-146100000D02* X127400000Y-136600000D01* -X131550000Y-74200000D02* -X131550000Y-79450000D01* -X126300000Y-100300000D02* -X128574265Y-102574265D01* -X128400000Y-82600000D02* -X128400000Y-97931091D01* X126300000Y-100031091D02* X126300000Y-100300000D01* +X130600000Y-80400000D02* +X128400000Y-82600000D01* +X128400000Y-82600000D02* +X128400000Y-97931091D01* +X128400000Y-97931091D02* +X126300000Y-100031091D01* +X130600000Y-79100000D02* +X130600000Y-80400000D01* +X131250000Y-73900000D02* +X131550000Y-74200000D01* +X126300000Y-100300000D02* +X128574265Y-102574265D01* +X131550000Y-78150000D02* +X130600000Y-79100000D01* X136550000Y-146050000D02* X136500000Y-146100000D01* X127400000Y-136600000D02* X123284500Y-132484500D01* +X131550000Y-74200000D02* +X131550000Y-78150000D01* X136500000Y-146100000D02* X127400000Y-146100000D01* %TO.N,/Buttons_Direct/BTN_MACRO2*% @@ -1118,6 +1121,25 @@ X143500000Y-84500000D02* X143500000Y-85742362D01* X143500000Y-85742362D02* X135816422Y-93425941D01* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X121700000Y-64100000D02* +X122800000Y-65200000D01* +X126900000Y-74300000D02* +X127200000Y-74600000D01* +X122800000Y-65200000D02* +X124700000Y-65200000D01* +X127200000Y-74600000D02* +X127200000Y-75734314D01* +X126958949Y-75975365D02* +X126958949Y-76641051D01* +X126958949Y-76641051D02* +X126700000Y-76900000D01* +X126900000Y-67400000D02* +X126900000Y-74300000D01* +X127200000Y-75734314D02* +X126958949Y-75975365D01* +X124700000Y-65200000D02* +X126900000Y-67400000D01* %TO.N,/Buttons_Direct/BTN_MACRO5*% X134375000Y-115075000D02* X140947794Y-115075000D01* @@ -1159,26 +1181,13 @@ X148100000Y-106400000D02* X145000000Y-109500000D01* X148100000Y-92746167D02* X148100000Y-106400000D01* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X122500000Y-72500000D02* -X122500000Y-63500000D01* -X125000000Y-75000000D02* -X122500000Y-72500000D01* -X122500000Y-63500000D02* -X122000000Y-63000000D01* -X127200000Y-75000000D02* -X125000000Y-75000000D01* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X149900000Y-63000000D02* -X148400000Y-64500000D01* -X150160000Y-63000000D02* -X149900000Y-63000000D01* -X133210000Y-65390000D02* -X130800000Y-67800000D01* -X148400000Y-64500000D02* -X133210000Y-64500000D01* -X133210000Y-64500000D02* -X133210000Y-65390000D01* +X134500000Y-70900000D02* +X135200000Y-70200000D01* +X133950000Y-70900000D02* +X134500000Y-70900000D01* +X135200000Y-70200000D02* +X136900000Y-70200000D01* %TO.N,/MCU_Core/STICK_X*% X137500000Y-81000000D02* X137500000Y-86520000D01* @@ -1206,17 +1215,19 @@ X133998529Y-92650000D01* X134350000Y-93001471D02* X134350000Y-93284314D01* %TO.N,/MCU_Core/VSYS_SENSE*% -X127300000Y-71100000D02* -X127500000Y-71300000D01* -X123900000Y-71100000D02* -X127300000Y-71100000D01* +X125700000Y-82941051D02* +X125700000Y-73500000D01* +X126758949Y-84000000D02* +X125700000Y-82941051D01* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X128000000Y-75500000D02* +X127358949Y-88391051D02* X127358949Y-76141051D01* X127358949Y-76141051D02* +X128000000Y-75500000D01* +X125900000Y-89850000D02* X127358949Y-88391051D01* -X127358949Y-88391051D02* -X125250000Y-90500000D01* +X125900000Y-90500000D02* +X125900000Y-89850000D01* %TO.N,/Buttons_Direct/BTN_THR_DN*% X128000000Y-76500000D02* X128000000Y-97765405D01* @@ -1251,32 +1262,28 @@ X133400000Y-80400000D01* X143400000Y-79648529D02* X143038529Y-80010000D01* %TO.N,/Accelerometer/I2C_SCL*% -X127000000Y-73000000D02* -X130900000Y-76900000D01* -X141300000Y-76400000D02* -X141300000Y-75700000D01* -X125400000Y-73000000D02* -X127000000Y-73000000D01* +X136600000Y-74800000D02* +X140400000Y-74800000D01* +X133350000Y-78800000D02* +X133449997Y-78700003D01* +X133449997Y-77150003D02* +X134600000Y-76000000D01* X135450000Y-76000000D02* X135450000Y-75950000D01* -X134600000Y-76000000D02* -X135450000Y-76000000D01* -X125400000Y-73000000D02* -X125400000Y-71725119D01* -X125400000Y-71725119D02* -X125374880Y-71699999D01* +X133449997Y-78700003D02* +X133449997Y-77150003D01* +X141300000Y-75700000D02* +X141300000Y-76400000D01* +X130950000Y-77200000D02* +X127925735Y-74175735D01* +X127925735Y-74175735D02* +X127624265Y-74175735D01* X135450000Y-75950000D02* X136600000Y-74800000D01* -X133449997Y-77150003D02* -X134600000Y-76000000D01* -X141300000Y-75700000D02* -X140400000Y-74800000D01* -X133350000Y-77150003D02* -X133449997Y-77150003D01* -X130900000Y-76900000D02* -X130900000Y-76950000D01* X140400000Y-74800000D02* -X136600000Y-74800000D01* +X141300000Y-75700000D01* +X134600000Y-76000000D02* +X135450000Y-76000000D01* %TO.N,/MCU_Core/BTN_STICK*% X136450000Y-98800000D02* X134250000Y-101000000D01* @@ -1391,7 +1398,7 @@ X136999999Y-122096015D01* X135700000Y-119884314D02* X135700000Y-121410000D01* %TO.N,/MCU_Core/PWR_HOLD*% -D45* +D43* X143884313Y-79499388D02* X144050000Y-79333701D01* X144000000Y-118350000D02* @@ -1429,7 +1436,7 @@ X144050000Y-78813604D01* X144150000Y-80634925D02* X143884313Y-80369238D01* %TO.N,/MCU_Core/RGB_DIN*% -D46* +D44* X148544265Y-77455735D02* X148500000Y-77500000D01* X148544265Y-73955735D02* @@ -1476,44 +1483,46 @@ X122984500Y-150984500D01* X150600000Y-133000000D02* X150600000Y-133800000D01* %TO.N,/MCU_Core/STAT1*% +X132750000Y-93001471D02* +X133900000Y-94151471D01* +X129174265Y-102822794D02* +X128297059Y-103700000D01* +X133350000Y-70000000D02* +X133350000Y-71750000D01* X127075735Y-119724265D02* X127575000Y-119225000D01* X130600000Y-119273385D02* X130600000Y-119420000D01* -X129174265Y-102822794D02* -X128297059Y-103700000D01* -X128920000Y-120000000D02* -X128145000Y-119225000D01* +X129050000Y-99650000D02* +X129050000Y-102201471D01* X128297059Y-103700000D02* X128100000Y-103700000D01* +X128920000Y-120000000D02* +X128145000Y-119225000D01* X127575000Y-119225000D02* X128145000Y-119225000D01* -X133250000Y-71850000D02* -X132750000Y-72350000D01* -X129174265Y-102325736D02* -X129174265Y-102822794D01* -X129050000Y-102201471D02* -X129174265Y-102325736D01* X126624265Y-119724265D02* X127075735Y-119724265D01* -X129050000Y-99650000D02* -X129050000Y-102201471D01* X131950000Y-118600000D02* X131273386Y-118600000D01* X131273386Y-118600000D02* X130600000Y-119273385D01* -X133900000Y-94151471D02* -X133900000Y-94800000D01* -X133900000Y-94800000D02* -X129050000Y-99650000D01* X130600000Y-119420000D02* X130020000Y-120000000D01* -X128920000Y-120000000D02* -X130020000Y-120000000D01* -X132750000Y-93001471D02* -X133900000Y-94151471D01* +X133350000Y-71750000D02* +X132750000Y-72350000D01* X132750000Y-72350000D02* X132750000Y-93001471D01* +X128920000Y-120000000D02* +X130020000Y-120000000D01* +X129050000Y-102201471D02* +X129174265Y-102325736D01* +X133900000Y-94800000D02* +X129050000Y-99650000D01* +X129174265Y-102325736D02* +X129174265Y-102822794D01* +X133900000Y-94151471D02* +X133900000Y-94800000D01* %TO.N,VBUS*% X128931000Y-155100000D02* X126600000Y-155100000D01* @@ -1547,10 +1556,10 @@ X139067209Y-154232791D02* X138150000Y-155150000D01* X122584500Y-122496576D02* X126056076Y-119025000D01* -D45* +D43* X130000000Y-118040000D02* X128040000Y-118040000D01* -D46* +D44* X138200000Y-153700000D02* X135500000Y-151000000D01* X135500000Y-151000000D02* @@ -1568,20 +1577,22 @@ X128931000Y-155100000D01* %TO.N,VSYS*% X143100000Y-121201304D02* X143500652Y-120800652D01* -X130425000Y-104475000D02* -X131450000Y-105500000D01* X147670000Y-128900000D02* X147670000Y-129080000D01* +X124688235Y-99463236D02* +X123675735Y-100475736D01* X143400000Y-123950000D02* X143600000Y-124150000D01* +X127626471Y-104475000D02* +X130425000Y-104475000D01* X147181076Y-113880000D02* X147900000Y-113880000D01* +X124659759Y-89061229D02* +X124688235Y-89089705D01* +X123975736Y-100824264D02* +X127626471Y-104475000D01* X138000000Y-118124499D02* X138000000Y-117000000D01* -X123488235Y-89211765D02* -X123488235Y-100336764D01* -X124600000Y-88100000D02* -X123488235Y-89211765D01* X149350000Y-130760000D02* X150250000Y-131660000D01* X131700000Y-105500000D02* @@ -1590,23 +1601,29 @@ X143500652Y-120800652D02* X146930000Y-117371304D01* X134600000Y-117000000D02* X135500000Y-117000000D01* -D45* +D43* X130525000Y-107725000D02* X130525000Y-106425000D01* -D47* +D45* X148625000Y-114605000D02* X148520000Y-114500000D01* -D46* +D44* X134050000Y-117550000D02* X134600000Y-117000000D01* X148625000Y-116050000D02* X148625000Y-114605000D01* X137100000Y-116100000D02* X136200000Y-116100000D01* +X123675735Y-100524265D02* +X123975736Y-100824264D01* +X124659759Y-89061229D02* +X124599265Y-89121723D01* X139000000Y-119124499D02* X138000000Y-118124499D01* -X127626471Y-104475000D02* -X130425000Y-104475000D01* +X123675735Y-100475736D02* +X123675735Y-100524265D01* +X124688235Y-89089705D02* +X124688235Y-99463236D01* X143100000Y-123950000D02* X143100000Y-121201304D01* X146930000Y-114131076D02* @@ -1619,16 +1636,16 @@ X135500000Y-117000000D02* X138000000Y-117000000D01* X147900000Y-113880000D02* X148520000Y-114500000D01* -X123488235Y-100336764D02* -X127626471Y-104475000D01* X147670000Y-129080000D02* X149350000Y-130760000D01* -D45* +D43* X130525000Y-106425000D02* X131450000Y-105500000D01* -D46* +D44* X143100000Y-123950000D02* X143400000Y-123950000D01* +X130425000Y-104475000D02* +X131450000Y-105500000D01* X138000000Y-117000000D02* X137100000Y-116100000D01* X134400000Y-108200000D02* @@ -1649,7 +1666,7 @@ X147500000Y-116825000D01* %TO.N,/Power_Buck/PWR_EN*% X151800000Y-114860000D02* X151800000Y-114900000D01* -D47* +D45* X143000000Y-114500000D02* X134113870Y-114500000D01* X150500000Y-117000000D02* @@ -1664,19 +1681,19 @@ X133850000Y-111000000D02* X133425000Y-111000000D01* X134113870Y-114500000D02* X133588870Y-113975000D01* -D46* +D44* X151800000Y-114900000D02* X150500000Y-116200000D01* %TO.N,VBAT*% -D47* +D45* X139821016Y-120775000D02* X139608884Y-120775000D01* X152400000Y-98978858D02* X152400000Y-102071142D01* -D45* +D43* X136500000Y-120500000D02* X136500000Y-119775000D01* -D47* +D45* X152400000Y-102071142D02* X152225000Y-102246142D01* X152400000Y-97821142D02* @@ -1689,10 +1706,10 @@ X152225000Y-92221142D02* X152225000Y-93028858D01* X152225000Y-87971142D02* X152225000Y-88778858D01* -D45* +D43* X136500000Y-119775000D02* X135325000Y-118600000D01* -D47* +D45* X139375000Y-121008884D02* X139375000Y-121282232D01* X152225000Y-98803858D02* @@ -1733,10 +1750,10 @@ X152400000Y-92046142D02* X152225000Y-92221142D01* X152400000Y-87796142D02* X152400000Y-81908984D01* -D46* +D44* X135325000Y-118600000D02* X134050000Y-118600000D01* -D47* +D45* X152500000Y-81808984D02* X152500000Y-77500000D01* X139375000Y-121282232D02* @@ -1744,7 +1761,7 @@ X138957232Y-121700000D01* X152400000Y-107100000D02* X141000000Y-118500000D01* %TO.N,/Power_Control/PWR_BTN_INV_BASE*% -D46* +D44* X146650000Y-128900000D02* X146650000Y-130475000D01* X145850000Y-126850000D02* @@ -1843,7 +1860,7 @@ X131000000Y-119439070D01* X131439071Y-119000000D02* X131950000Y-119000000D01* %TO.N,/Power_Buck/BUCK_FB*% -D45* +D43* X134500000Y-109800000D02* X134500000Y-112000000D01* X132425000Y-107725000D02* @@ -1855,7 +1872,7 @@ X122525000Y-113760000D01* X134500000Y-112000000D02* X132740000Y-113760000D01* %TO.N,/Power_Buck/BUCK_SW*% -D48* +D46* X130525000Y-110000000D02* X128050000Y-110000000D01* %TD*% diff --git a/PCB/production/gerbers/snips_controller-B_Mask.gbr b/PCB/production/gerbers/snips_controller-B_Mask.gbr index 4bef138..8db0be1 100644 --- a/PCB/production/gerbers/snips_controller-B_Mask.gbr +++ b/PCB/production/gerbers/snips_controller-B_Mask.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Soldermask,Bot*% %TF.FilePolarity,Negative*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -53,17 +53,15 @@ G04 Aperture macros list end* %ADD31RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% %ADD32RoundRect,0.087500X0.225000X0.087500X-0.225000X0.087500X-0.225000X-0.087500X0.225000X-0.087500X0*% %ADD33RoundRect,0.087500X0.087500X0.225000X-0.087500X0.225000X-0.087500X-0.225000X0.087500X-0.225000X0*% -%ADD34RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD34RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% %ADD35C,2.000000*% %ADD36RoundRect,0.225000X0.250000X-0.225000X0.250000X0.225000X-0.250000X0.225000X-0.250000X-0.225000X0*% %ADD37RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% -%ADD38R,1.050000X1.500000*% -%ADD39O,1.050000X1.500000*% -%ADD40RoundRect,0.225000X0.375000X-0.225000X0.375000X0.225000X-0.375000X0.225000X-0.375000X-0.225000X0*% -%ADD41RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% -%ADD42RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% -%ADD43RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% -%ADD44R,1.500000X3.600000*% +%ADD38RoundRect,0.225000X0.375000X-0.225000X0.375000X0.225000X-0.375000X0.225000X-0.375000X-0.225000X0*% +%ADD39RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% +%ADD40RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD41RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% +%ADD42R,1.500000X3.600000*% G04 APERTURE END LIST* D10* %TO.C,U_CHG1*% @@ -2878,18 +2876,23 @@ X138000000Y-149500000D03* X140000000Y-149500000D03* X142000000Y-149500000D03* %TD*% +D13* +%TO.C,SW_TRIG_DIG2*% +X153475000Y-61750000D03* +X149225000Y-61750000D03* +%TD*% D11* %TO.C,MH1*% -X123400000Y-81400000D03* +X123300000Y-69200000D03* %TD*% D13* %TO.C,SW_TRIG_DIG1*% -X126850000Y-61750000D03* -X122600000Y-61750000D03* +X125775000Y-61750000D03* +X121525000Y-61750000D03* %TD*% D11* %TO.C,MH2*% -X151600000Y-70000000D03* +X151700000Y-69200000D03* %TD*% D13* %TO.C,SW_THR_UP1*% @@ -3039,8 +3042,8 @@ X146450000Y-120760000D03* %TD*% D34* %TO.C,C_HALL1*% -X152000000Y-66000000D03* -X151040000Y-66000000D03* +X139500000Y-73480000D03* +X139500000Y-72520000D03* %TD*% D20* %TO.C,R_INV_BASE1*% @@ -3092,13 +3095,6 @@ D35* X125900000Y-95300000D03* %TD*% D38* -%TO.C,U_HALL1*% -X152700000Y-63000000D03* -D39* -X151430000Y-63000000D03* -X150160000Y-63000000D03* -%TD*% -D40* %TO.C,D_OR2*% X144000000Y-121650000D03* X144000000Y-118350000D03* @@ -3108,7 +3104,7 @@ D31* X146000000Y-123510000D03* X146000000Y-122490000D03* %TD*% -D41* +D39* %TO.C,R_FB2*% X122525000Y-114740000D03* X122525000Y-115760000D03* @@ -3118,7 +3114,7 @@ D20* X126020000Y-122500000D03* X125000000Y-122500000D03* %TD*% -D34* +D40* %TO.C,C_IMU_3*% X141760000Y-79400000D03* X140800000Y-79400000D03* @@ -3137,7 +3133,7 @@ D31* X122525000Y-113760000D03* X122525000Y-112740000D03* %TD*% -D42* +D41* %TO.C,U_BUCK1*% X132425000Y-110000000D03* X131475000Y-110000000D03* @@ -3145,17 +3141,22 @@ X130525000Y-110000000D03* X130525000Y-107725000D03* X132425000Y-107725000D03* %TD*% -D43* +D34* %TO.C,C_IMU_1*% X138800000Y-77655000D03* X138800000Y-76695000D03* %TD*% -D44* +D42* %TO.C,L_BUCK1*% X128050000Y-110000000D03* X125000000Y-110000000D03* %TD*% D22* +%TO.C,U_HALL1*% +X136900000Y-72100000D03* +X136900000Y-70200000D03* +X138775000Y-71150000D03* +%TD*% %TO.C,Q_INV1*% X145850000Y-126850000D03* X145850000Y-124950000D03* diff --git a/PCB/production/gerbers/snips_controller-B_Paste.gbr b/PCB/production/gerbers/snips_controller-B_Paste.gbr index 9ed2afa..c1de026 100644 --- a/PCB/production/gerbers/snips_controller-B_Paste.gbr +++ b/PCB/production/gerbers/snips_controller-B_Paste.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Paste,Bot*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -42,14 +42,14 @@ G04 Aperture macros list end* %ADD20RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% %ADD21RoundRect,0.087500X0.225000X0.087500X-0.225000X0.087500X-0.225000X-0.087500X0.225000X-0.087500X0*% %ADD22RoundRect,0.087500X0.087500X0.225000X-0.087500X0.225000X-0.087500X-0.225000X0.087500X-0.225000X0*% -%ADD23RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD23RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% %ADD24RoundRect,0.225000X0.250000X-0.225000X0.250000X0.225000X-0.250000X0.225000X-0.250000X-0.225000X0*% %ADD25RoundRect,0.052000X0.198000X0.048000X-0.198000X0.048000X-0.198000X-0.048000X0.198000X-0.048000X0*% %ADD26RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% %ADD27RoundRect,0.225000X0.375000X-0.225000X0.375000X0.225000X-0.375000X0.225000X-0.375000X-0.225000X0*% %ADD28RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% -%ADD29RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% -%ADD30RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% +%ADD29RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD30RoundRect,0.150000X0.150000X-0.512500X0.150000X0.512500X-0.150000X0.512500X-0.150000X-0.512500X0*% %ADD31R,1.500000X3.600000*% G04 APERTURE END LIST* D10* @@ -392,8 +392,8 @@ X146450000Y-120760000D03* %TD*% D23* %TO.C,C_HALL1*% -X152000000Y-66000000D03* -X151040000Y-66000000D03* +X139500000Y-73480000D03* +X139500000Y-72520000D03* %TD*% D11* %TO.C,R_INV_BASE1*% @@ -469,7 +469,7 @@ D11* X126020000Y-122500000D03* X125000000Y-122500000D03* %TD*% -D23* +D29* %TO.C,C_IMU_3*% X141760000Y-79400000D03* X140800000Y-79400000D03* @@ -488,7 +488,7 @@ D20* X122525000Y-113760000D03* X122525000Y-112740000D03* %TD*% -D29* +D30* %TO.C,U_BUCK1*% X132425000Y-110000000D03* X131475000Y-110000000D03* @@ -496,7 +496,7 @@ X130525000Y-110000000D03* X130525000Y-107725000D03* X132425000Y-107725000D03* %TD*% -D30* +D23* %TO.C,C_IMU_1*% X138800000Y-77655000D03* X138800000Y-76695000D03* @@ -507,6 +507,11 @@ X128050000Y-110000000D03* X125000000Y-110000000D03* %TD*% D13* +%TO.C,U_HALL1*% +X136900000Y-72100000D03* +X136900000Y-70200000D03* +X138775000Y-71150000D03* +%TD*% %TO.C,Q_INV1*% X145850000Y-126850000D03* X145850000Y-124950000D03* diff --git a/PCB/production/gerbers/snips_controller-B_Silkscreen.gbr b/PCB/production/gerbers/snips_controller-B_Silkscreen.gbr index 49d5fe1..6f8e08b 100644 --- a/PCB/production/gerbers/snips_controller-B_Silkscreen.gbr +++ b/PCB/production/gerbers/snips_controller-B_Silkscreen.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Legend,Bot*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -18,66 +18,6 @@ G04 APERTURE LIST* %ADD14C,0.200000*% G04 APERTURE END LIST* D10* -X153058020Y-61146895D02* -X152791353Y-61946895D01* -X152791353Y-61946895D02* -X152524687Y-61146895D01* -X151229449Y-61184990D02* -X151305639Y-61146895D01* -X151305639Y-61146895D02* -X151419925Y-61146895D01* -X151419925Y-61146895D02* -X151534211Y-61184990D01* -X151534211Y-61184990D02* -X151610401Y-61261180D01* -X151610401Y-61261180D02* -X151648496Y-61337371D01* -X151648496Y-61337371D02* -X151686592Y-61489752D01* -X151686592Y-61489752D02* -X151686592Y-61604038D01* -X151686592Y-61604038D02* -X151648496Y-61756419D01* -X151648496Y-61756419D02* -X151610401Y-61832609D01* -X151610401Y-61832609D02* -X151534211Y-61908800D01* -X151534211Y-61908800D02* -X151419925Y-61946895D01* -X151419925Y-61946895D02* -X151343734Y-61946895D01* -X151343734Y-61946895D02* -X151229449Y-61908800D01* -X151229449Y-61908800D02* -X151191353Y-61870704D01* -X151191353Y-61870704D02* -X151191353Y-61604038D01* -X151191353Y-61604038D02* -X151343734Y-61604038D01* -X150238972Y-61946895D02* -X150238972Y-61146895D01* -X150238972Y-61146895D02* -X150048496Y-61146895D01* -X150048496Y-61146895D02* -X149934210Y-61184990D01* -X149934210Y-61184990D02* -X149858020Y-61261180D01* -X149858020Y-61261180D02* -X149819925Y-61337371D01* -X149819925Y-61337371D02* -X149781829Y-61489752D01* -X149781829Y-61489752D02* -X149781829Y-61604038D01* -X149781829Y-61604038D02* -X149819925Y-61756419D01* -X149819925Y-61756419D02* -X149858020Y-61832609D01* -X149858020Y-61832609D02* -X149934210Y-61908800D01* -X149934210Y-61908800D02* -X150048496Y-61946895D01* -X150048496Y-61946895D02* -X150238972Y-61946895D01* X152414856Y-115856265D02* X152462475Y-115999122D01* X152462475Y-115999122D02* @@ -4069,10 +4009,10 @@ X146090000Y-120387836D01* X146810000Y-120172164D02* X146810000Y-120387836D01* %TO.C,C_HALL1*% -X151627836Y-65640000D02* -X151412164Y-65640000D01* -X151627836Y-66360000D02* -X151412164Y-66360000D01* +X139140000Y-73107836D02* +X139140000Y-72892164D01* +X139860000Y-73107836D02* +X139860000Y-72892164D01* %TO.C,R_INV_BASE1*% X147313641Y-128520000D02* X147006359Y-128520000D01* @@ -4574,19 +4514,6 @@ X137446359Y-122420000D02* X137753641Y-122420000D01* X137446359Y-123180000D02* X137753641Y-123180000D01* -%TO.C,U_HALL1*% -X153230000Y-64850000D02* -X149630000Y-64850000D01* -X149591522Y-64838478D02* -G75* -G02* -X151430000Y-60399999I1838478J1838478D01* -G01* -X151430000Y-60400000D02* -G75* -G02* -X153268478Y-64838478I0J-2600000D01* -G01* %TO.C,D_OR2*% X143000000Y-122360000D02* X143000000Y-118350000D01* @@ -5252,6 +5179,32 @@ X128910000Y-112110000D02* X127885000Y-112110000D01* X128910000Y-112110000D02* X128910000Y-111085000D01* +%TO.C,U_HALL1*% +X137077500Y-69590000D02* +X137077500Y-69640000D01* +X137077500Y-70760000D02* +X137077500Y-71540000D01* +X137077500Y-72660000D02* +X137077500Y-72710000D01* +X137077500Y-72710000D02* +X138597500Y-72710000D01* +X138597500Y-69590000D02* +X137077500Y-69590000D01* +X138597500Y-70590000D02* +X138597500Y-69590000D01* +X138597500Y-72710000D02* +X138597500Y-71710000D01* +X136537500Y-71530000D02* +X136777500Y-71200000D01* +X136297500Y-71200000D01* +X136537500Y-71530000D01* +G36* +X136537500Y-71530000D02* +G01* +X136297500Y-71200000D01* +X136777500Y-71200000D01* +X136537500Y-71530000D01* +G37* %TO.C,Q_INV1*% X146027500Y-124340000D02* X146027500Y-124390000D01* diff --git a/PCB/production/gerbers/snips_controller-Edge_Cuts.gbr b/PCB/production/gerbers/snips_controller-Edge_Cuts.gbr index 0a11d46..2f97242 100644 --- a/PCB/production/gerbers/snips_controller-Edge_Cuts.gbr +++ b/PCB/production/gerbers/snips_controller-Edge_Cuts.gbr @@ -1,11 +1,11 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Profile,NP*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* diff --git a/PCB/production/gerbers/snips_controller-F_Cu.gbr b/PCB/production/gerbers/snips_controller-F_Cu.gbr index bb2f9f4..3228966 100644 --- a/PCB/production/gerbers/snips_controller-F_Cu.gbr +++ b/PCB/production/gerbers/snips_controller-F_Cu.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Copper,L1,Top*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -36,67 +36,67 @@ G04 Aperture macros list end* %ADD11RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD12RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% +%ADD12RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD13RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD13RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD14C,1.000000*% +%ADD14RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD15RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% +%ADD15RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD16RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% +%ADD16RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD17RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% +%ADD17C,1.000000*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD18RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% +%ADD18RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD19RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% +%ADD19RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD20RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% +%ADD20RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD21RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% +%ADD21R,1.500000X0.900000*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD22R,1.500000X0.900000*% +%ADD22R,0.900000X1.500000*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD23R,0.900000X1.500000*% +%ADD23R,0.900000X0.900000*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD24R,0.900000X0.900000*% +%ADD24RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD25RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% +%ADD25RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD26RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% +%ADD26RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD27RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% +%ADD27RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD28RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% +%ADD28RoundRect,0.150000X0.150000X0.625000X-0.150000X0.625000X-0.150000X-0.625000X0.150000X-0.625000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD29RoundRect,0.150000X-0.150000X-0.625000X0.150000X-0.625000X0.150000X0.625000X-0.150000X0.625000X0*% +%ADD29RoundRect,0.250000X0.350000X0.650000X-0.350000X0.650000X-0.350000X-0.650000X0.350000X-0.650000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD30RoundRect,0.250000X-0.350000X-0.650000X0.350000X-0.650000X0.350000X0.650000X-0.350000X0.650000X0*% +%ADD30RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD31RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% +%ADD31RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD32RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD32RoundRect,0.140000X-0.140000X-0.170000X0.140000X-0.170000X0.140000X0.170000X-0.140000X0.170000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% %ADD33RoundRect,0.250000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0*% @@ -132,46 +132,43 @@ G04 Aperture macros list end* %ADD43C,2.250000*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD44RoundRect,0.225000X0.250000X-0.225000X0.250000X0.225000X-0.250000X0.225000X-0.250000X-0.225000X0*% +%ADD44RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD45RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% +%ADD45RoundRect,0.225000X0.225000X0.250000X-0.225000X0.250000X-0.225000X-0.250000X0.225000X-0.250000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD46RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% +%ADD46RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD47RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% +%ADD47RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% %TD*% %TA.AperFunction,SMDPad,CuDef*% -%ADD48RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% +%ADD48RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% %TD*% -%TA.AperFunction,ComponentPad*% -%ADD49RoundRect,0.250000X0.350000X0.625000X-0.350000X0.625000X-0.350000X-0.625000X0.350000X-0.625000X0*% -%TD*% -%TA.AperFunction,ComponentPad*% -%ADD50O,1.200000X1.750000*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD49RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% %TD*% %TA.AperFunction,ComponentPad*% -%ADD51C,0.300000*% +%ADD50RoundRect,0.250000X0.350000X0.625000X-0.350000X0.625000X-0.350000X-0.625000X0.350000X-0.625000X0*% %TD*% %TA.AperFunction,ComponentPad*% -%ADD52R,1.050000X1.500000*% +%ADD51O,1.200000X1.750000*% %TD*% %TA.AperFunction,ComponentPad*% -%ADD53O,1.050000X1.500000*% +%ADD52C,0.300000*% %TD*% %TA.AperFunction,ViaPad*% -%ADD54C,0.600000*% +%ADD53C,0.600000*% %TD*% %TA.AperFunction,Conductor*% -%ADD55C,0.200000*% +%ADD54C,0.200000*% %TD*% %TA.AperFunction,Conductor*% -%ADD56C,0.300000*% +%ADD55C,0.300000*% %TD*% %TA.AperFunction,Conductor*% -%ADD57C,0.550000*% +%ADD56C,0.550000*% %TD*% G04 APERTURE END LIST* D10* @@ -239,6 +236,22 @@ X134500000Y-112500000D03* %TO.N,GND*% X140500000Y-112500000D03* %TD*% +D12* +%TO.P,SW_TRIG_DIG2,1,1_1*% +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X152575000Y-62650000D03* +X150125000Y-62650000D03* +D13* +%TO.P,SW_TRIG_DIG2,2,2_2*% +%TO.N,GND*% +X151350000Y-62650000D03* +D14* +%TO.P,SW_TRIG_DIG2,MP*% +%TO.N,N/C*% +X153200000Y-60700000D03* +X149500000Y-60700000D03* +%TD*% +D11* %TO.P,SW_MACRO5,1,1_1*% %TO.N,/Buttons_Direct/BTN_MACRO5*% X134500000Y-121250000D03* @@ -246,7 +259,7 @@ X134500000Y-121250000D03* %TO.N,GND*% X140500000Y-121250000D03* %TD*% -D12* +D15* %TO.P,R_XBEE_RST1,1*% %TO.N,3V3*% X137760000Y-130000000D03* @@ -254,7 +267,7 @@ X137760000Y-130000000D03* %TO.N,/XBee/XBEE_RST_PU*% X136740000Y-130000000D03* %TD*% -D13* +D16* %TO.P,C_XBEE_RC1,1*% %TO.N,/XBee/XBEE_RST_PU*% X135210000Y-131250000D03* @@ -262,7 +275,7 @@ X135210000Y-131250000D03* %TO.N,GND*% X134250000Y-131250000D03* %TD*% -D14* +D17* %TO.P,FID1,*% %TO.N,*% X123000000Y-95000000D03* @@ -275,7 +288,7 @@ X144750000Y-121250000D03* %TO.N,GND*% X150750000Y-121250000D03* %TD*% -D15* +D18* %TO.P,C_RGB1,1*% %TO.N,3V3*% X150500000Y-153230000D03* @@ -291,7 +304,7 @@ X144750000Y-112500000D03* %TO.N,GND*% X150750000Y-112500000D03* %TD*% -D16* +D19* %TO.P,C_XBEE_VCC1,1*% %TO.N,3V3*% X141000000Y-129020000D03* @@ -299,7 +312,7 @@ X141000000Y-129020000D03* %TO.N,GND*% X141000000Y-129980000D03* %TD*% -D12* +D15* %TO.P,R_XBEE_RC1,1*% %TO.N,/XBee/XBEE_RST_PU*% X135260000Y-130000000D03* @@ -307,7 +320,7 @@ X135260000Y-130000000D03* %TO.N,/XBee/XBEE_RESET*% X134240000Y-130000000D03* %TD*% -D17* +D20* %TO.P,R_USB_DM1,1*% %TO.N,/MCU_Core/USB_DM*% X127750000Y-154270000D03* @@ -315,30 +328,30 @@ X127750000Y-154270000D03* %TO.N,/MCU_Core/USB_DM_MCU*% X127750000Y-153250000D03* %TD*% -D18* +D12* %TO.P,SW_TRIG_DIG1,1,1_1*% %TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X125950000Y-62650000D03* -X123500000Y-62650000D03* -D19* +X124875000Y-62650000D03* +X122425000Y-62650000D03* +D13* %TO.P,SW_TRIG_DIG1,2,2_2*% %TO.N,GND*% -X124725000Y-62650000D03* -D20* +X123650000Y-62650000D03* +D14* %TO.P,SW_TRIG_DIG1,MP*% %TO.N,N/C*% -X126575000Y-60700000D03* -X122875000Y-60700000D03* +X125500000Y-60700000D03* +X121800000Y-60700000D03* %TD*% -D21* +D15* %TO.P,R_EN_PU1,1*% %TO.N,/MCU_Core/MCU_EN*% -X127200000Y-78050000D03* +X127400000Y-67400000D03* %TO.P,R_EN_PU1,2*% %TO.N,3V3*% -X127200000Y-79070000D03* +X126380000Y-67400000D03* %TD*% -D22* +D21* %TO.P,U_MCU1,1,GND_1*% %TO.N,GND*% X129250000Y-64650000D03* @@ -381,7 +394,7 @@ X129250000Y-79890000D03* %TO.P,U_MCU1,14,GPIO20/U1CTS/ADC2_CH9/CLK_OUT1/USB_D+_14*% %TO.N,/MCU_Core/USB_DP_MCU*% X129250000Y-81160000D03* -D23* +D22* %TO.P,U_MCU1,15,GPIO3/TOUCH3/ADC1_CH2_15*% %TO.N,N/C*% X131015000Y-82410000D03* @@ -418,7 +431,7 @@ X143715000Y-82410000D03* %TO.P,U_MCU1,26,GPIO45_26*% %TO.N,N/C*% X144985000Y-82410000D03* -D22* +D21* %TO.P,U_MCU1,27,GPIO0/BOOT_27*% %TO.N,/MCU_Core/MCU_BOOT*% X146750000Y-81160000D03* @@ -461,7 +474,7 @@ X146750000Y-65920000D03* %TO.P,U_MCU1,40,GND_40*% %TO.N,GND*% X146750000Y-64650000D03* -D24* +D23* %TO.P,U_MCU1,41,GND_41*% X135100000Y-70970000D03* X135100000Y-72370000D03* @@ -475,22 +488,22 @@ X137900000Y-70970000D03* X137900000Y-72370000D03* X137900000Y-73770000D03* %TD*% -D25* +D24* %TO.P,SW_THR_UP1,1,1_1*% %TO.N,/Buttons_Direct/BTN_THR_UP*% X122650000Y-89275000D03* X122650000Y-91725000D03* -D26* +D25* %TO.P,SW_THR_UP1,2,2_2*% %TO.N,GND*% X122650000Y-90500000D03* -D27* +D26* %TO.P,SW_THR_UP1,MP*% %TO.N,N/C*% X120700000Y-88650000D03* X120700000Y-92350000D03* %TD*% -D28* +D27* %TO.P,D_RGB1,1*% %TO.N,GND*% X147500000Y-157550000D03* @@ -504,26 +517,26 @@ X144200000Y-155750000D03* %TO.N,N/C*% X144200000Y-157550000D03* %TD*% -D29* +D28* %TO.P,U_OLED1,1,GND_1*% %TO.N,GND*% -X122500000Y-69000000D03* +X125600000Y-82800000D03* %TO.P,U_OLED1,2,VCC_2*% %TO.N,3V3*% -X123500000Y-69000000D03* +X124600000Y-82800000D03* %TO.P,U_OLED1,3,SDA_3*% %TO.N,/Accelerometer/I2C_SDA*% -X124500000Y-69000000D03* +X123600000Y-82800000D03* %TO.P,U_OLED1,4,SCL_4*% %TO.N,/Accelerometer/I2C_SCL*% -X125500000Y-69000000D03* -D30* +X122600000Y-82800000D03* +D29* %TO.P,U_OLED1,MP*% %TO.N,N/C*% -X121200000Y-72875000D03* -X126800000Y-72875000D03* +X126900000Y-78925000D03* +X121300000Y-78925000D03* %TD*% -D31* +D30* %TO.P,R_CC2,1*% %TO.N,/USB_C/USB_CC2*% X143740000Y-152750000D03* @@ -531,7 +544,7 @@ X143740000Y-152750000D03* %TO.N,GND*% X144760000Y-152750000D03* %TD*% -D32* +D31* %TO.P,C_XBEE_VCC4,1*% %TO.N,3V3*% X142500000Y-133000000D03* @@ -539,13 +552,13 @@ X142500000Y-133000000D03* %TO.N,GND*% X142500000Y-134550000D03* %TD*% -D13* +D32* %TO.P,C_OLED_2,1*% %TO.N,3V3*% -X123480000Y-67000000D03* +X124800000Y-84625000D03* %TO.P,C_OLED_2,2*% %TO.N,GND*% -X122520000Y-67000000D03* +X125760000Y-84625000D03* %TD*% D33* %TO.P,SW_BOOT1,1,1_1*% @@ -642,7 +655,7 @@ X141820000Y-153970000D03* D40* X141820000Y-158150000D03* %TD*% -D32* +D31* %TO.P,C_XBEE_VCC2,1*% %TO.N,3V3*% X143750000Y-129225000D03* @@ -688,7 +701,7 @@ X134250000Y-105500000D03* %TO.N,N/C*% X140750000Y-105500000D03* %TD*% -D15* +D18* %TO.P,C_DBNC1,1*% %TO.N,/MCU_Core/PWR_BTN_SENSE*% X126500000Y-154480000D03* @@ -696,7 +709,7 @@ X126500000Y-154480000D03* %TO.N,GND*% X126500000Y-153520000D03* %TD*% -D17* +D20* %TO.P,R_RGB1,1*% %TO.N,/RGB_LED/RGB_DIN_R*% X148250000Y-153260000D03* @@ -704,7 +717,7 @@ X148250000Y-153260000D03* %TO.N,/MCU_Core/RGB_DIN*% X148250000Y-152240000D03* %TD*% -D21* +D44* %TO.P,R_CC1,1*% %TO.N,/USB_C/USB_CC1*% X130250000Y-153250000D03* @@ -712,36 +725,36 @@ X130250000Y-153250000D03* %TO.N,GND*% X130250000Y-154270000D03* %TD*% -D16* +D18* %TO.P,C_3V3_2,1*% %TO.N,3V3*% -X127500000Y-64590000D03* +X127500000Y-65360000D03* %TO.P,C_3V3_2,2*% %TO.N,GND*% -X127500000Y-65550000D03* +X127500000Y-64400000D03* %TD*% -D14* +D17* %TO.P,FID2,*% %TO.N,*% X151300000Y-127300000D03* %TD*% -D44* +D45* %TO.P,C_3V3_1,1*% %TO.N,3V3*% -X126000000Y-66275000D03* +X126150000Y-64700000D03* %TO.P,C_3V3_1,2*% %TO.N,GND*% -X126000000Y-64725000D03* +X124600000Y-64700000D03* %TD*% -D31* +D30* %TO.P,R_VSYS1,1*% %TO.N,VSYS*% -X124580000Y-87000000D03* +X125480000Y-89100000D03* %TO.P,R_VSYS1,2*% %TO.N,/MCU_Core/VSYS_SENSE*% -X125600000Y-87000000D03* +X126500000Y-89100000D03* %TD*% -D17* +D20* %TO.P,R_USB_DP1,1*% %TO.N,/MCU_Core/USB_DP*% X129000000Y-154270000D03* @@ -749,22 +762,22 @@ X129000000Y-154270000D03* %TO.N,/MCU_Core/USB_DP_MCU*% X129000000Y-153250000D03* %TD*% -D25* +D24* %TO.P,SW_THR_DN1,1,1_1*% %TO.N,/Buttons_Direct/BTN_THR_DN*% X122650000Y-99300000D03* X122650000Y-101750000D03* -D26* +D25* %TO.P,SW_THR_DN1,2,2_2*% %TO.N,GND*% X122650000Y-100525000D03* -D27* +D26* %TO.P,SW_THR_DN1,MP*% %TO.N,N/C*% X120700000Y-98675000D03* X120700000Y-102375000D03* %TD*% -D16* +D19* %TO.P,C_XBEE_VCC3,1*% %TO.N,3V3*% X142250000Y-129020000D03* @@ -787,13 +800,13 @@ D36* X154250000Y-92350000D03* X154250000Y-88650000D03* %TD*% -D45* +D46* %TO.P,C_OLED_1,1*% %TO.N,3V3*% -X123450000Y-65500000D03* +X123900000Y-86300000D03* %TO.P,C_OLED_1,2*% %TO.N,GND*% -X121550000Y-65500000D03* +X125800000Y-86300000D03* %TD*% D11* %TO.P,SW_MACRO1,1,1_1*% @@ -803,20 +816,20 @@ X124250000Y-112500000D03* %TO.N,GND*% X130250000Y-112500000D03* %TD*% -D12* +D15* %TO.P,R_VSYS2,1*% %TO.N,/MCU_Core/VSYS_SENSE*% -X125590000Y-85800000D03* +X126500000Y-87900000D03* %TO.P,R_VSYS2,2*% %TO.N,GND*% -X124570000Y-85800000D03* +X125480000Y-87900000D03* %TD*% -D14* +D17* %TO.P,FID3,*% %TO.N,*% X147000000Y-150100000D03* %TD*% -D16* +D19* %TO.P,C_STICK1,1*% %TO.N,3V3*% X148500000Y-92520000D03* @@ -824,7 +837,7 @@ X148500000Y-92520000D03* %TO.N,GND*% X148500000Y-93480000D03* %TD*% -D21* +D44* %TO.P,R_XBEE_ATTN_PU1,1*% %TO.N,3V3*% X139600000Y-146780000D03* @@ -832,30 +845,30 @@ X139600000Y-146780000D03* %TO.N,/XBee/XBEE_SPI_ATTN*% X139600000Y-147800000D03* %TD*% -D46* +D47* %TO.P,SW_PWR1,1,1_1*% %TO.N,/MCU_Core/PWR_BTN_SENSE*% X127775000Y-157050000D03* X130225000Y-157050000D03* -D47* +D48* %TO.P,SW_PWR1,2,2_2*% %TO.N,GND*% X129000000Y-157050000D03* -D48* +D49* %TO.P,SW_PWR1,MP*% %TO.N,N/C*% X127150000Y-159000000D03* X130850000Y-159000000D03* %TD*% -D15* +D16* %TO.P,C_3V3_3,1*% %TO.N,3V3*% -X127300000Y-67660000D03* +X127400000Y-66400000D03* %TO.P,C_3V3_3,2*% %TO.N,GND*% -X127300000Y-66700000D03* +X126440000Y-66400000D03* %TD*% -D21* +D44* %TO.P,R_BOOT_PU1,1*% %TO.N,/MCU_Core/MCU_BOOT*% X148500000Y-82230000D03* @@ -863,55 +876,44 @@ X148500000Y-82230000D03* %TO.N,3V3*% X148500000Y-83250000D03* %TD*% -D49* +D50* %TO.P,BT1,1,Pin_1_1*% %TO.N,VBAT*% X152500000Y-77500000D03* -D50* +D51* %TO.P,BT1,2,Pin_2_2*% %TO.N,GND*% X150500000Y-77500000D03* %TD*% -D51* +D52* %TO.P,U_CHG1,12*% %TO.N,GND*% X133000000Y-118500000D03* %TO.P,U_CHG1,13*% X133000000Y-119500000D03* %TD*% -D52* -%TO.P,U_HALL1,1,VCC_1*% -%TO.N,3V3*% -X152700000Y-63000000D03* D53* -%TO.P,U_HALL1,2,GND_2*% -%TO.N,GND*% -X151430000Y-63000000D03* -%TO.P,U_HALL1,3,OUT_3*% -%TO.N,/Hall_Trigger/TRIG_ANALOG*% -X150160000Y-63000000D03* -%TD*% -D54* %TO.N,3V3*% +X140900000Y-72900000D03* X139342332Y-122557668D03* X122500000Y-107500000D03* X127110000Y-120400000D03* X151500000Y-153000000D03* +X122600000Y-86300000D03* X135500000Y-88000000D03* X149550000Y-132950000D03* X148000000Y-91500000D03* X142800000Y-79400000D03* X138600000Y-146500000D03* -X130750000Y-65000000D03* +X130800000Y-65900000D03* X137400000Y-79200000D03* -X126200000Y-78000000D03* X147500000Y-83000000D03* X140000000Y-75450000D03* %TO.N,XBEE_SLEEP_RQ*% X145400000Y-70950000D03* X131100000Y-87350000D03* %TO.N,GND*% -X121500000Y-67000000D03* +X123200000Y-64500000D03* X142500000Y-121250000D03* X133020634Y-117700000D03* X147500000Y-119000000D03* @@ -922,7 +924,7 @@ X138800000Y-75600000D03* X147500000Y-96500000D03* X126000000Y-153000000D03* X125000000Y-118000000D03* -X130750000Y-63750000D03* +X130800000Y-64700000D03* X121500000Y-112000000D03* X124000000Y-129000000D03* X128750000Y-121250000D03* @@ -931,7 +933,7 @@ X152750000Y-112500000D03* X133020634Y-120500000D03* X131050000Y-111200000D03* X135000000Y-104000000D03* -X124088235Y-90338235D03* +X124088235Y-90513235D03* X128000000Y-105500000D03* X139500000Y-118500000D03* X149800000Y-150800000D03* @@ -941,11 +943,11 @@ X145000000Y-123500000D03* X145250000Y-65100000D03* X123500000Y-124000000D03* X123500000Y-115500000D03* -X124400000Y-84800000D03* +X140700000Y-71800000D03* X152500000Y-121250000D03* +X124400000Y-88000000D03* X145800000Y-153300000D03* X150500000Y-90500000D03* -X139250000Y-73750000D03* X129000000Y-119000000D03* X150500000Y-100500000D03* X143600000Y-77200000D03* @@ -965,6 +967,9 @@ X128574265Y-102574265D03* %TO.N,/Buttons_Direct/BTN_MACRO2*% X143500000Y-84500000D03* X135816422Y-93425941D03* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X126700000Y-76900000D03* +X121700000Y-64100000D03* %TO.N,/Buttons_Direct/BTN_MACRO5*% X144000000Y-87000000D03* X133500000Y-116400000D03* @@ -976,20 +981,17 @@ X145000000Y-77000000D03* %TO.N,/Buttons_Direct/BTN_MACRO3*% X145500000Y-80500000D03* X145000000Y-109500000D03* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X127200000Y-75000000D03* -X122000000Y-63000000D03* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X130800000Y-67800000D03* +X133950000Y-70900000D03* %TO.N,/MCU_Core/STICK_X*% X137500000Y-81000000D03* %TO.N,/MCU_Core/STICK_Y*% X134800000Y-80752983D03* %TO.N,/MCU_Core/VSYS_SENSE*% -X123900000Y-71100000D03* -X127500000Y-71300000D03* +X125700000Y-73500000D03* +X126758949Y-84000000D03* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X125250000Y-90500000D03* +X125900000Y-90500000D03* X128000000Y-75500000D03* %TO.N,/Buttons_Direct/BTN_THR_DN*% X125340812Y-100424593D03* @@ -999,9 +1001,9 @@ X133350000Y-76350000D03* %TO.N,ACCEL_INT1*% X133400000Y-80400000D03* %TO.N,/Accelerometer/I2C_SCL*% -X125374880Y-71699999D03* -X133350000Y-77150003D03* -X130900000Y-76950000D03* +X130950000Y-77200000D03* +X127624265Y-74175735D03* +X133350000Y-78800000D03* %TO.N,/MCU_Core/BTN_STICK*% X141300000Y-98800000D03* %TO.N,/Buttons_Direct/BTN_MACRO1*% @@ -1036,7 +1038,7 @@ X148544265Y-73955735D03* X125307179Y-152600000D03* X154400000Y-85000000D03* %TO.N,/MCU_Core/STAT1*% -X133250000Y-71850000D03* +X133350000Y-70000000D03* X128100000Y-103700000D03* X126624265Y-119724265D03* %TO.N,VBUS*% @@ -1044,7 +1046,7 @@ X135470098Y-154243783D03* X139556798Y-154232791D03* %TO.N,VSYS*% X142200000Y-119500000D03* -X124600000Y-88100000D03* +X124659759Y-89061229D03* X136200000Y-116100000D03* X143600000Y-124150000D03* X136275000Y-108200000D03* @@ -1057,21 +1059,19 @@ X143000000Y-114500000D03* X133850000Y-111000000D03* %TD*% %TO.N,3V3*% -D55* +D54* +X130800000Y-65900000D02* +X129850000Y-65900000D01* X142000000Y-128770000D02* X142250000Y-129020000D01* X148500000Y-83250000D02* X147750000Y-83250000D01* -X127910000Y-67050000D02* -X127300000Y-67660000D01* -X127910000Y-66310000D02* -X127910000Y-67050000D01* X146460000Y-92520000D02* X146230000Y-92750000D01* X138880000Y-146780000D02* X138600000Y-146500000D01* -X126930000Y-78730000D02* -X126930000Y-78800000D01* +X129850000Y-65900000D02* +X129830000Y-65920000D01* X141015500Y-127734500D02* X141015500Y-127920634D01* X140234500Y-128515500D02* @@ -1080,34 +1080,48 @@ X150500000Y-153500000D02* X148550000Y-155450000D01* X148500000Y-92520000D02* X148500000Y-92000000D01* -X126000000Y-66360000D02* -X126000000Y-66275000D01* +X126400000Y-67400000D02* +X127400000Y-66400000D01* +X126380000Y-67400000D02* +X126400000Y-67400000D01* X135000000Y-86520000D02* X135000000Y-87500000D01* X140420634Y-128515500D02* X140234500Y-128515500D01* +X124600000Y-82800000D02* +X124600000Y-84425000D01* X142000000Y-128020000D02* X141000000Y-129020000D01* -X123480000Y-65530000D02* -X123450000Y-65500000D01* +X129830000Y-65920000D02* +X129250000Y-65920000D01* +X126260000Y-64590000D02* +X126150000Y-64700000D01* X148550000Y-156290552D02* X148290552Y-156550000D01* -X126200000Y-78000000D02* -X126930000Y-78730000D01* X148290552Y-156550000D02* X145000000Y-156550000D01* X142000000Y-127500000D02* X142000000Y-128770000D01* +X126810000Y-65360000D02* +X126150000Y-64700000D01* +X127500000Y-65360000D02* +X127740000Y-65360000D01* X138750000Y-130000000D02* X137760000Y-130000000D01* +X127980000Y-65920000D02* +X127500000Y-66400000D01* +X124650000Y-84775000D02* +X124800000Y-84625000D01* +X124600000Y-84425000D02* +X124800000Y-84625000D01* X146230000Y-92750000D02* X146250000Y-92750000D01* +X128300000Y-65920000D02* +X127980000Y-65920000D01* +X127500000Y-65360000D02* +X126810000Y-65360000D01* X139600000Y-146780000D02* X138880000Y-146780000D01* -X123500000Y-69000000D02* -X123500000Y-67020000D01* -X123480000Y-67000000D02* -X123480000Y-65530000D01* X145000000Y-156550000D02* X144200000Y-155750000D01* X141015500Y-127920634D02* @@ -1116,40 +1130,32 @@ X142000000Y-127500000D02* X141250000Y-127500000D01* X147750000Y-83250000D02* X147500000Y-83000000D01* -X126000000Y-66090000D02* -X127500000Y-64590000D01* -X129830000Y-65920000D02* -X130750000Y-65000000D01* +X127740000Y-65360000D02* +X128300000Y-65920000D01* X151270000Y-153230000D02* X151500000Y-153000000D01* X142000000Y-127500000D02* X143725000Y-129225000D01* -X126000000Y-66275000D02* -X126000000Y-66090000D01* -X128300000Y-65920000D02* -X127910000Y-66310000D01* +X122600000Y-86300000D02* +X123900000Y-86300000D01* +X124800000Y-84625000D02* +X124800000Y-85400000D01* X144250000Y-133000000D02* X142500000Y-133000000D01* X148550000Y-155450000D02* X148550000Y-156290552D01* -X123500000Y-67020000D02* -X123480000Y-67000000D01* -X126000000Y-66275000D02* -X124225000Y-66275000D01* +X124800000Y-85400000D02* +X123900000Y-86300000D01* X142000000Y-127500000D02* X142000000Y-128020000D01* X129250000Y-65920000D02* X128300000Y-65920000D01* X144600000Y-132650000D02* X144250000Y-133000000D01* -X127300000Y-67660000D02* -X126000000Y-66360000D01* X150500000Y-153230000D02* X150500000Y-153500000D01* X148500000Y-92000000D02* X148000000Y-91500000D01* -X126930000Y-78800000D02* -X127200000Y-79070000D01* X148500000Y-92520000D02* X146460000Y-92520000D01* X143750000Y-129225000D02* @@ -1160,39 +1166,39 @@ X135000000Y-87500000D02* X135500000Y-88000000D01* X141250000Y-127500000D02* X141015500Y-127734500D01* -X129250000Y-65920000D02* -X129830000Y-65920000D01* X150500000Y-153230000D02* X151270000Y-153230000D01* X144600000Y-130075000D02* X144600000Y-132650000D01* -X124225000Y-66275000D02* -X123450000Y-65500000D01* %TO.N,/MCU_Core/SPI_MISO*% -X137365000Y-83360000D02* -X137025000Y-83700000D01* -X133405687Y-84260000D02* -X131507108Y-86158579D01* -X136000000Y-117743348D02* -X136000000Y-127500000D01* -X134636370Y-84260000D02* -X133405687Y-84260000D01* -X137046917Y-116696431D02* -X136000000Y-117743348D01* +X134174314Y-84260000D02* +X132057108Y-86377207D01* X137025000Y-83700000D02* X135900685Y-83700000D01* -X135036371Y-83860000D02* -X134636370Y-84260000D01* +X131924265Y-86575736D02* +X137046917Y-91698388D01* +X134636370Y-84260000D02* +X134174314Y-84260000D01* X137046917Y-91698388D02* X137046917Y-116696431D01* +X132057108Y-86442893D02* +X131924265Y-86575736D01* +X135036369Y-83860000D02* +X134636370Y-84260000D01* +X136000000Y-117743348D02* +X136000000Y-127500000D01* X137365000Y-82410000D02* X137365000Y-83360000D01* -X131507108Y-86158579D02* -X137046917Y-91698388D01* -X135740685Y-83860000D02* -X135036371Y-83860000D01* +X137046917Y-116696431D02* +X136000000Y-117743348D01* X135900685Y-83700000D02* X135740685Y-83860000D01* +X132057108Y-86377207D02* +X132057108Y-86442893D01* +X135740685Y-83860000D02* +X135036369Y-83860000D01* +X137365000Y-83360000D02* +X137025000Y-83700000D01* %TO.N,/XBee/XBEE_RESET*% X134240000Y-127740000D02* X134000000Y-127500000D01* @@ -1228,32 +1234,30 @@ X143750000Y-130775000D02* X143275000Y-130775000D01* X151650000Y-151075000D02* X151650000Y-150675000D01* +X126300000Y-66400000D02* +X124600000Y-64700000D01* X137900000Y-70970000D02* X136500000Y-70970000D01* +X123200000Y-64200000D02* +X123650000Y-63750000D01* X147500000Y-157550000D02* X146700000Y-158350000D01* -X129850000Y-64650000D02* -X130750000Y-63750000D01* X146700000Y-158350000D02* X142020000Y-158350000D01* -X124570000Y-84970000D02* -X124400000Y-84800000D01* -X128376134Y-64650000D02* -X127770909Y-65255225D01* X141000000Y-129980000D02* X141000000Y-130980000D01* X135100000Y-70970000D02* X136500000Y-70970000D01* -X122575000Y-64475000D02* -X121550000Y-65500000D01* X150500000Y-151500000D02* X149800000Y-150800000D01* X145250000Y-152750000D02* X145800000Y-153300000D01* +X123926470Y-90500000D02* +X122650000Y-90500000D01* X134250000Y-131250000D02* X126250000Y-131250000D01* -X122650000Y-90500000D02* -X123926470Y-90500000D01* +X146750000Y-64650000D02* +X150249999Y-64650000D01* X141500000Y-132550000D02* X141500000Y-133550000D01* X130250000Y-154270000D02* @@ -1274,18 +1278,14 @@ X140120000Y-131860000D02* X134860000Y-131860000D01* X134250000Y-153055000D02* X134095000Y-153055000D01* +X123400000Y-64700000D02* +X123200000Y-64500000D01* X145800000Y-153350000D02* X145800000Y-153300000D01* X143045000Y-130775000D02* X142250000Y-129980000D01* -X139230000Y-73770000D02* -X139250000Y-73750000D01* -X122520000Y-68480000D02* -X122520000Y-67000000D01* X136500000Y-72370000D02* X136500000Y-73770000D01* -X121550000Y-65500000D02* -X121550000Y-66950000D01* X150750000Y-112500000D02* X152750000Y-112500000D01* X140500000Y-121250000D02* @@ -1300,50 +1300,44 @@ X141000000Y-130980000D02* X140120000Y-131860000D01* X140000000Y-87500000D02* X139500000Y-88000000D01* -X127770909Y-65255225D02* -X127782841Y-65267157D01* -X129250000Y-64650000D02* -X128376134Y-64650000D01* -X123799999Y-64475000D02* -X122575000Y-64475000D01* -X121550000Y-66950000D02* -X121500000Y-67000000D01* -X125825001Y-64650000D02* -X124725000Y-63549999D01* -X137900000Y-73770000D02* -X139230000Y-73770000D01* -X122500000Y-69000000D02* -X122500000Y-68500000D01* +X123939705Y-90513235D02* +X123926470Y-90500000D01* +X126440000Y-66400000D02* +X126300000Y-66400000D01* +X124500000Y-87900000D02* +X124400000Y-88000000D01* X126250000Y-131250000D02* X124000000Y-129000000D01* X126500000Y-153520000D02* X126500000Y-153500000D01* -X123926470Y-90500000D02* -X124088235Y-90338235D01* -X122500000Y-68500000D02* -X122520000Y-68480000D01* -X127500000Y-65550000D02* -X127500000Y-66500000D01* +X125480000Y-87900000D02* +X124500000Y-87900000D01* X135100000Y-72370000D02* X135100000Y-73770000D01* X140000000Y-86520000D02* X140000000Y-87500000D01* -X122520000Y-67000000D02* -X122520000Y-66470000D01* +X125760000Y-82960000D02* +X125600000Y-82800000D01* +X125800000Y-87580000D02* +X125480000Y-87900000D01* +X140130000Y-72370000D02* +X140700000Y-71800000D01* X134095000Y-153055000D02* X133180000Y-153970000D01* -X129250000Y-64650000D02* -X129850000Y-64650000D01* X141665000Y-153970000D02* X140750000Y-153055000D01* -X127500000Y-66500000D02* -X127300000Y-66700000D01* +X129250000Y-64650000D02* +X127750000Y-64650000D01* +X150249999Y-64650000D02* +X151350000Y-63549999D01* X145700000Y-64650000D02* X145250000Y-65100000D01* X152300000Y-90500000D02* X150500000Y-90500000D01* X126500000Y-153500000D02* X126000000Y-153000000D01* +X123650000Y-63750000D02* +X123650000Y-62650000D01* X124475000Y-100525000D02* X124500000Y-100500000D01* X152300000Y-100525000D02* @@ -1354,8 +1348,6 @@ X124000000Y-127500000D02* X124000000Y-129000000D01* X140500000Y-112500000D02* X142250000Y-112500000D01* -X124725000Y-63549999D02* -X123799999Y-64475000D01* X150500000Y-152225000D02* X151650000Y-151075000D01* X141820000Y-153970000D02* @@ -1366,16 +1358,26 @@ X132880000Y-154270000D02* X133180000Y-153970000D01* X148500000Y-93480000D02* X148500000Y-95500000D01* +X151350000Y-63549999D02* +X151350000Y-62650000D01* +X125760000Y-84625000D02* +X125760000Y-86260000D01* X122650000Y-100525000D02* X124475000Y-100525000D01* X146750000Y-64650000D02* X145700000Y-64650000D01* +X124088235Y-90513235D02* +X123939705Y-90513235D01* X141500000Y-133550000D02* X142500000Y-134550000D01* +X125760000Y-86260000D02* +X125800000Y-86300000D01* +X137900000Y-72370000D02* +X140130000Y-72370000D01* X142020000Y-158350000D02* X141820000Y-158150000D01* -X122520000Y-66470000D02* -X121550000Y-65500000D01* +X127750000Y-64650000D02* +X127500000Y-64400000D01* X141820000Y-153970000D02* X141820000Y-158150000D01* X129000000Y-157300000D02* @@ -1384,12 +1386,14 @@ X150750000Y-121250000D02* X152500000Y-121250000D01* X134250000Y-104750000D02* X135000000Y-104000000D01* +X125800000Y-86300000D02* +X125800000Y-87580000D01* X150500000Y-152270000D02* X150500000Y-151500000D01* -X124570000Y-85800000D02* -X124570000Y-84970000D01* X130250000Y-121250000D02* X128750000Y-121250000D01* +X130800000Y-64700000D02* +X129900000Y-64700000D01* X137900000Y-72370000D02* X137900000Y-70970000D01* X146230000Y-97750000D02* @@ -1404,160 +1408,196 @@ X148500000Y-95500000D02* X147500000Y-96500000D01* X146250000Y-97750000D02* X147500000Y-96500000D01* -X124725000Y-62650000D02* -X124725000Y-63549999D01* +X129850000Y-64650000D02* +X129250000Y-64650000D01* +X123200000Y-64500000D02* +X123200000Y-64200000D01* +X129900000Y-64700000D02* +X129850000Y-64650000D01* X131050000Y-111950000D02* X130500000Y-112500000D01* X142250000Y-129980000D02* X141000000Y-129980000D01* +X125760000Y-84625000D02* +X125760000Y-82960000D01* +X124600000Y-64700000D02* +X123400000Y-64700000D01* +X123650000Y-62650000D02* +X123799999Y-62800001D01* X135100000Y-70970000D02* X135100000Y-72370000D01* X130500000Y-112500000D02* X130250000Y-112500000D01* %TO.N,/MCU_Core/SPI_MOSI*% -X134470685Y-83860000D02* -X133240000Y-83860000D01* -X133240000Y-83860000D02* -X129600000Y-87500000D01* +X130500000Y-87101471D02* +X130500000Y-87500000D01* +X126600000Y-114700000D02* +X122100000Y-119200000D01* +X129600000Y-100700000D02* +X126600000Y-103700000D01* +X122100000Y-134200000D02* +X124000000Y-136100000D01* +X135575000Y-83025000D02* +X135575000Y-83460000D01* +X134705000Y-83625685D02* +X134470685Y-83860000D01* X134705000Y-83460000D02* X134705000Y-83625685D01* -X126600000Y-103700000D02* -X126600000Y-114700000D01* +X124000000Y-136100000D02* +X130036134Y-136100000D01* +X130500000Y-87500000D02* +X129600000Y-88400000D01* +X131250000Y-86750000D02* +X130851471Y-86750000D01* +X125300000Y-150800000D02* +X124000000Y-149500000D01* +X129600000Y-88400000D02* +X129600000Y-100700000D01* +X136095000Y-82505000D02* +X135575000Y-83025000D01* +X142136134Y-150800000D02* +X125300000Y-150800000D01* X122100000Y-119200000D02* X122100000Y-134200000D01* -X134705000Y-83625685D02* -X134470685Y-83860000D01* -X126600000Y-114700000D02* -X122100000Y-119200000D01* -X130036134Y-136100000D02* -X143015500Y-149079366D01* +X131524265Y-86475735D02* +X131250000Y-86750000D01* +X131657108Y-86277207D02* +X131524265Y-86410050D01* +X131657108Y-86211522D02* +X131657108Y-86277207D01* +X135575000Y-83460000D02* +X134705000Y-83460000D01* +X134470685Y-83860000D02* +X134008628Y-83860000D01* X143015500Y-149079366D02* X143015500Y-149920634D01* -X142136134Y-150800000D02* -X125300000Y-150800000D01* +X134008628Y-83860000D02* +X131657108Y-86211522D01* +X131524265Y-86410050D02* +X131524265Y-86475735D01* +X126600000Y-103700000D02* +X126600000Y-114700000D01* +X130851471Y-86750000D02* +X130500000Y-87101471D01* +X130036134Y-136100000D02* +X143015500Y-149079366D01* X136095000Y-82410000D02* X136095000Y-82505000D01* -X136095000Y-82505000D02* -X135575000Y-83025000D01* X143015500Y-149920634D02* X142136134Y-150800000D01* -X129600000Y-87500000D02* -X129600000Y-100700000D01* -X125300000Y-150800000D02* -X124000000Y-149500000D01* -X135575000Y-83025000D02* -X135575000Y-83460000D01* -X135575000Y-83460000D02* -X134705000Y-83460000D01* -X122100000Y-134200000D02* -X124000000Y-136100000D01* -X129600000Y-100700000D02* -X126600000Y-103700000D01* -X124000000Y-136100000D02* -X130036134Y-136100000D01* %TO.N,/MCU_Core/XBEE_ON_SLEEP*% -X133605000Y-85192059D02* -X133605000Y-85195000D01* +X138400000Y-122463866D02* +X139668067Y-123731933D01* X134552108Y-88072207D02* X134552107Y-88072208D01* +X139035000Y-83525686D02* +X138060685Y-84500000D01* +X134552107Y-88072208D02* +X135079900Y-88600000D01* +X134967740Y-85060000D02* +X134540000Y-85060000D01* X136072055Y-84660001D02* X135367741Y-84660000D01* -X139035000Y-83460000D02* -X139035000Y-83525686D01* -X133737059Y-85060000D02* -X133605000Y-85192059D01* -X133605000Y-85195000D02* -X132639950Y-86160050D01* -X138400000Y-122463866D02* -X139668067Y-123731933D01* -X139905000Y-83460000D02* -X139035000Y-83460000D01* -X136074265Y-88274265D02* -X138400000Y-90600000D01* X135079900Y-88600000D02* X135748529Y-88600000D01* -X132639950Y-86160050D02* -X134552108Y-88072207D01* -X139035000Y-83525686D02* -X138060685Y-84500000D01* +X136074265Y-88274265D02* +X138400000Y-90600000D01* +X139905000Y-82410000D02* +X139905000Y-83460000D01* X138400000Y-90600000D02* X138400000Y-122463866D01* +X133300000Y-86820099D02* +X134552108Y-88072207D01* +X139905000Y-83460000D02* +X139035000Y-83460000D01* +X134540000Y-85060000D02* +X133605000Y-85995000D01* +X136232056Y-84500000D02* +X136072055Y-84660001D01* X128000000Y-140200000D02* X128000000Y-149500000D01* +X138060685Y-84500000D02* +X136232056Y-84500000D01* X135748529Y-88600000D02* X136074265Y-88274265D01* -X139905000Y-82410000D02* -X139905000Y-83460000D01* +X139035000Y-83460000D02* +X139035000Y-83525686D01* +X133605000Y-86095000D02* +X133300000Y-86400000D01* X135367741Y-84660000D02* X134967740Y-85060000D01* -X136232056Y-84500000D02* -X136072055Y-84660001D01* -X134967740Y-85060000D02* -X133737059Y-85060000D01* -X138060685Y-84500000D02* -X136232056Y-84500000D01* -X134552107Y-88072208D02* -X135079900Y-88600000D01* +X133300000Y-86400000D02* +X133300000Y-86820099D01* +X133605000Y-85995000D02* +X133605000Y-86095000D01* %TO.N,/MCU_Core/XBee_CS*% -X135906370Y-84260000D02* -X135202055Y-84260000D01* +X132457108Y-86542893D02* +X137446917Y-91532703D01* +X134802055Y-84660000D02* +X134340000Y-84660000D01* +X136400000Y-118700000D02* +X136400000Y-125600000D01* +X137895000Y-84100000D02* +X136066371Y-84100000D01* +X134340000Y-84660000D02* +X132457108Y-86542893D01* X137446917Y-91532703D02* X137446917Y-117653083D01* -X134802055Y-84660000D02* -X133571373Y-84660000D01* +X136066371Y-84100000D02* +X135906370Y-84260000D01* X138635000Y-83360000D02* X137895000Y-84100000D01* -X132072794Y-86158579D02* -X137446917Y-91532703D01* X134700000Y-145500000D02* X134700000Y-148200000D01* X134700000Y-148200000D02* X136000000Y-149500000D01* -X135202055Y-84260000D02* -X134802055Y-84660000D01* X137446917Y-117653083D02* X136400000Y-118700000D01* -X136066371Y-84100000D02* -X135906370Y-84260000D01* -X137895000Y-84100000D02* -X136066371Y-84100000D01* -X133571373Y-84660000D02* -X132072794Y-86158579D01* -X136400000Y-118700000D02* -X136400000Y-125600000D01* +X135202055Y-84260000D02* +X134802055Y-84660000D01* +X135906370Y-84260000D02* +X135202055Y-84260000D01* X138635000Y-82410000D02* X138635000Y-83360000D01* X136400000Y-125600000D02* X136600000Y-125800000D01* %TO.N,/MCU_Core/SPI_SCK*% -X121600000Y-118800000D02* -X126100000Y-114300000D01* -X129870448Y-136500000D02* -X123800000Y-136500000D01* -X133040000Y-83460000D02* +X135300000Y-146800000D02* +X135300000Y-141929552D01* +X126100000Y-103100000D02* +X129200000Y-100000000D01* +X126100000Y-114300000D02* +X126100000Y-103100000D01* +X133840000Y-83460000D02* X134305000Y-83460000D01* -X123800000Y-136500000D02* -X121600000Y-134300000D01* +X130100000Y-87200000D02* +X130100000Y-86935785D01* +X130100000Y-86935785D02* +X130685786Y-86350000D01* +X134305000Y-82410000D02* +X134825000Y-82410000D01* X134305000Y-83460000D02* X134305000Y-82410000D01* X129200000Y-100000000D02* -X129200000Y-87300000D01* -X126100000Y-114300000D02* -X126100000Y-103100000D01* -X129200000Y-87300000D02* -X133040000Y-83460000D01* -X126100000Y-103100000D02* -X129200000Y-100000000D01* -X138000000Y-149500000D02* -X135300000Y-146800000D01* -X135300000Y-146800000D02* -X135300000Y-141929552D01* +X129200000Y-88100000D01* +X123800000Y-136500000D02* +X121600000Y-134300000D01* X135300000Y-141929552D02* X129870448Y-136500000D01* -X134305000Y-82410000D02* -X134825000Y-82410000D01* +X129870448Y-136500000D02* +X123800000Y-136500000D01* X121600000Y-134300000D02* X121600000Y-118800000D01* +X138000000Y-149500000D02* +X135300000Y-146800000D01* +X130950000Y-86350000D02* +X133840000Y-83460000D01* +X130685786Y-86350000D02* +X130950000Y-86350000D01* +X121600000Y-118800000D02* +X126100000Y-114300000D01* +X129200000Y-88100000D02* +X130100000Y-87200000D01* %TO.N,/XBee/XBEE_SPI_ATTN*% X122984500Y-127079366D02* X122984500Y-132484500D01* @@ -1592,6 +1632,49 @@ X135675000Y-93284519D02* X135675000Y-111325000D01* X143715000Y-84285000D02* X143500000Y-84500000D01* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X124875000Y-61750000D02* +X124575000Y-61450000D01* +X124875000Y-62650000D02* +X125435000Y-63210000D01* +X127751471Y-77100000D02* +X128100000Y-77100000D01* +X126851471Y-76748529D02* +X127400000Y-76748529D01* +X152575000Y-62650000D02* +X152575000Y-61750000D01* +X128350000Y-77350000D02* +X129250000Y-77350000D01* +X125435000Y-63210000D02* +X149565000Y-63210000D01* +X127400000Y-76748529D02* +X127751471Y-77100000D01* +X152275000Y-61450000D02* +X150425000Y-61450000D01* +X124875000Y-62650000D02* +X124875000Y-61750000D01* +X126700000Y-76900000D02* +X126851471Y-76748529D01* +X149565000Y-63210000D02* +X150125000Y-62650000D01* +X124575000Y-61450000D02* +X122725000Y-61450000D01* +X150425000Y-61450000D02* +X150125000Y-61750000D01* +X150125000Y-61750000D02* +X150125000Y-62650000D01* +X121700000Y-63300000D02* +X121700000Y-64100000D01* +X122350000Y-62650000D02* +X121700000Y-63300000D01* +X122425000Y-61750000D02* +X122425000Y-62650000D01* +X128100000Y-77100000D02* +X128350000Y-77350000D01* +X122725000Y-61450000D02* +X122425000Y-61750000D01* +X152575000Y-61750000D02* +X152275000Y-61450000D01* %TO.N,/Buttons_Direct/BTN_MACRO5*% X135000000Y-119150000D02* X135248529Y-119150000D01* @@ -1718,97 +1801,52 @@ X136750000Y-153812410D01* X137750000Y-153812410D02* X137750000Y-153055000D01* %TO.N,/MCU_Core/USB_DM_MCU*% -X128610000Y-79890000D02* -X129250000Y-79890000D01* -X121251471Y-111400000D02* -X121500000Y-111400000D01* -X125940812Y-100756904D02* -X125940812Y-88059188D01* +X126500000Y-152000000D02* +X123000000Y-152000000D01* X123411358Y-107437171D02* X123411358Y-103286358D01* +X127400000Y-81100000D02* +X128610000Y-79890000D01* +X121251471Y-111400000D02* +X121500000Y-111400000D01* +X120900000Y-112248529D02* +X120900000Y-111751471D01* X121500000Y-111400000D02* X121500000Y-109348529D01* -X127750000Y-153250000D02* -X126500000Y-152000000D01* -X125940812Y-88059188D02* -X127400000Y-86600000D01* -X120800000Y-149800000D02* -X120800000Y-112600000D01* -X123411358Y-103286358D02* -X125940812Y-100756904D01* X121251471Y-112600000D02* X120900000Y-112248529D01* -X127400000Y-86600000D02* -X127400000Y-81100000D01* -X121500000Y-109348529D02* -X123411358Y-107437171D01* X123000000Y-152000000D02* X120800000Y-149800000D01* -X120900000Y-112248529D02* -X120900000Y-111751471D01* -X127400000Y-81100000D02* -X128610000Y-79890000D01* +X128610000Y-79890000D02* +X129250000Y-79890000D01* X120800000Y-112600000D02* X121251471Y-112600000D01* -X126500000Y-152000000D02* -X123000000Y-152000000D01* +X121500000Y-109348529D02* +X123411358Y-107437171D01* X120900000Y-111751471D02* X121251471Y-111400000D01* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X125950000Y-62650000D02* -X125950000Y-61750000D01* -X127400000Y-76748529D02* -X127751471Y-77100000D01* -X127751471Y-77100000D02* -X128100000Y-77100000D01* -X127200000Y-76200000D02* -X127400000Y-76400000D01* -X128350000Y-77350000D02* -X129250000Y-77350000D01* -X122350000Y-62650000D02* -X122000000Y-63000000D01* -X123500000Y-62000000D02* -X123500000Y-62650000D01* -X125650000Y-61450000D02* -X124050000Y-61450000D01* -X125950000Y-61750000D02* -X125650000Y-61450000D01* -X127400000Y-76400000D02* -X127400000Y-76748529D01* -X123500000Y-62650000D02* -X122350000Y-62650000D01* -X127200000Y-75000000D02* -X127200000Y-76200000D01* -X124050000Y-61450000D02* -X123500000Y-62000000D01* -X128100000Y-77100000D02* -X128350000Y-77350000D01* +X127750000Y-153250000D02* +X126500000Y-152000000D01* +X120800000Y-149800000D02* +X120800000Y-112600000D01* +X127400000Y-99297716D02* +X127400000Y-81100000D01* +X123411358Y-103286358D02* +X127400000Y-99297716D01* %TO.N,/MCU_Core/MCU_EN*% -X126600000Y-75600000D02* -X126000000Y-75000000D01* -X125900000Y-73900000D02* -X126000000Y-74000000D01* -X128720000Y-67190000D02* +X128300000Y-67190000D02* X129250000Y-67190000D01* -X126000000Y-75000000D02* -X126000000Y-74000000D01* -X127200000Y-78050000D02* -X126600000Y-77450000D01* -X128200000Y-67710000D02* -X128720000Y-67190000D01* -X126600000Y-77450000D02* -X126600000Y-75600000D01* -X128200000Y-69690256D02* -X128200000Y-67710000D01* -X128200000Y-69690256D02* -X125900000Y-71990256D01* -X125900000Y-71990256D02* -X125900000Y-73900000D01* +X128090000Y-67400000D02* +X128300000Y-67190000D01* +X127400000Y-67400000D02* +X128090000Y-67400000D01* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X130800000Y-67800000D02* +X132580000Y-70900000D02* X130140000Y-68460000D01* X130140000Y-68460000D02* X129250000Y-68460000D01* +X133950000Y-70900000D02* +X132580000Y-70900000D01* %TO.N,/MCU_Core/STICK_X*% X134399998Y-77899995D02* X134350000Y-77849998D01* @@ -1852,39 +1890,31 @@ X130200000Y-71000000D01* X134800000Y-80752983D02* X134800000Y-79311932D01* %TO.N,/MCU_Core/VSYS_SENSE*% -X125600000Y-85810000D02* -X125590000Y-85800000D01* -X126640000Y-80040000D02* -X123900000Y-77300000D01* -X126800000Y-82600000D02* -X126800000Y-80040000D01* -X125590000Y-83810000D02* -X126800000Y-82600000D01* -X123900000Y-77300000D02* -X123900000Y-71100000D01* -X125600000Y-87000000D02* -X125600000Y-85810000D01* -X127500000Y-71300000D02* -X128470000Y-72270000D01* -X126800000Y-80040000D02* -X126640000Y-80040000D01* -X128470000Y-72270000D02* +X126930000Y-72270000D02* X129250000Y-72270000D01* -X125590000Y-85800000D02* -X125590000Y-83810000D01* +X126950000Y-84191051D02* +X126758949Y-84000000D01* +X126500000Y-87900000D02* +X126500000Y-89100000D01* +X126500000Y-87900000D02* +X126950000Y-87450000D01* +X126950000Y-87450000D02* +X126950000Y-84191051D01* +X125700000Y-73500000D02* +X126930000Y-72270000D01* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X122650000Y-89275000D02* -X124025000Y-89275000D01* -X125150000Y-90400000D02* -X125250000Y-90500000D01* X125250000Y-90500000D02* -X124025000Y-91725000D01* -X124025000Y-89275000D02* -X125150000Y-90400000D01* +X124025000Y-89275000D01* X128690000Y-74810000D02* X128000000Y-75500000D01* X129250000Y-74810000D02* X128690000Y-74810000D01* +X125250000Y-90500000D02* +X124025000Y-91725000D01* +X125900000Y-90500000D02* +X125250000Y-90500000D01* +X124025000Y-89275000D02* +X122650000Y-89275000D01* X124025000Y-91725000D02* X122650000Y-91725000D01* %TO.N,/Buttons_Direct/BTN_THR_DN*% @@ -1903,46 +1933,30 @@ X128420000Y-76080000D01* X124300000Y-99300000D02* X125500000Y-100500000D01* %TO.N,/Accelerometer/I2C_SDA*% -X124900000Y-69400000D02* -X124500000Y-69000000D01* -X125000000Y-72173648D02* -X124774880Y-71948528D01* -X125000000Y-74800000D02* -X125000000Y-72173648D01* -X124900000Y-69815552D02* -X124900000Y-69400000D01* -X128780000Y-78620000D02* -X127760000Y-79640000D01* +X129250000Y-78620000D02* +X127800000Y-78620000D01* X130200000Y-78620000D02* X129250000Y-78620000D01* -X129250000Y-78620000D02* -X128780000Y-78620000D01* -X125600000Y-78408924D02* -X125600000Y-75400000D01* -X125000000Y-69915552D02* -X124900000Y-69815552D01* -X125000000Y-71226350D02* -X125000000Y-69915552D01* X130300000Y-76500000D02* X130300000Y-78520000D01* +X127800000Y-78620000D02* +X127800000Y-79809744D01* +X127800000Y-79809744D02* +X125884744Y-81725000D01* +X123600000Y-82384448D02* +X123600000Y-82800000D01* X133350000Y-76350000D02* X130450000Y-76350000D01* -X124774880Y-71451470D02* -X125000000Y-71226350D01* -X127760000Y-79640000D02* -X126831076Y-79640000D01* -X124774880Y-71948528D02* -X124774880Y-71451470D01* +X125884744Y-81725000D02* +X124259448Y-81725000D01* X129250000Y-78620000D02* X129210000Y-78580000D01* X130300000Y-78520000D02* X130200000Y-78620000D01* -X126831076Y-79640000D02* -X125600000Y-78408924D01* X130450000Y-76350000D02* X130300000Y-76500000D01* -X125600000Y-75400000D02* -X125000000Y-74800000D01* +X124259448Y-81725000D02* +X123600000Y-82384448D01* %TO.N,/MCU_Core/USB_DP_MCU*% X122965686Y-151400000D02* X127150000Y-151400000D01* @@ -1980,38 +1994,28 @@ X132500000Y-80400000D01* X132500000Y-80400000D02* X132150000Y-80750000D01* %TO.N,/Accelerometer/I2C_SCL*% -X125500000Y-71574879D02* -X125500000Y-69000000D01* -X133149997Y-76950000D02* -X133350000Y-77150003D01* -X133600000Y-78677617D02* -X133600000Y-78231373D01* -X134075000Y-81890000D02* -X134075000Y-81360000D01* -X133550000Y-77350003D02* -X133350000Y-77150003D01* -X133555000Y-82410000D02* +X134075000Y-81360000D02* X134075000Y-81890000D01* -X133550002Y-78181376D02* -X133550000Y-78181371D01* +X122600000Y-79200000D02* +X122600000Y-82800000D01* +X134075000Y-81890000D02* +X133555000Y-82410000D01* +X131750000Y-77200000D02* +X130950000Y-77200000D01* X134200000Y-79277618D02* +X134200000Y-81360000D01* +X133472383Y-78677617D02* X133600000Y-78677617D01* -X130900000Y-76950000D02* -X133149997Y-76950000D01* -X125374880Y-71699999D02* -X125500000Y-71574879D01* -X133600000Y-78231373D02* -X133550002Y-78181376D01* +X133350000Y-78800000D02* +X131750000Y-77200000D01* X134200000Y-81360000D02* +X134075000Y-81360000D01* +X133600000Y-78677617D02* X134200000Y-79277618D01* -X133549998Y-77850004D02* -X133550000Y-77850002D01* -X133550000Y-77850002D02* -X133550000Y-77350003D01* -X133550000Y-78181371D02* -X133549998Y-77850004D01* -X134075000Y-81360000D02* -X134200000Y-81360000D01* +X127624265Y-74175735D02* +X122600000Y-79200000D01* +X133350000Y-78800000D02* +X133472383Y-78677617D01* %TO.N,/MCU_Core/BTN_STICK*% X141325000Y-98775000D02* X141300000Y-98800000D01* @@ -2148,7 +2152,7 @@ X138000000Y-121096014D01* X135000000Y-76150000D02* X136300000Y-74850000D01* %TO.N,/MCU_Core/PWR_HOLD*% -D56* +D55* X139150000Y-113957107D02* X141992893Y-116800000D01* X146380000Y-70100000D02* @@ -2162,7 +2166,7 @@ X139150000Y-113957107D01* X144800000Y-70100000D02* X146380000Y-70100000D01* %TO.N,/MCU_Core/RGB_DIN*% -D55* +D54* X151000000Y-98900000D02* X150685786Y-98900000D01* X148250000Y-146750000D02* @@ -2218,26 +2222,38 @@ X149000000Y-99500000D01* X153750000Y-112914215D02* X153200000Y-113464215D01* %TO.N,/MCU_Core/PWR_BTN_SENSE*% -X149000000Y-73500000D02* -X148400000Y-72900000D01* +X148400000Y-68586522D02* +X147973477Y-68160000D01* +X149144265Y-73707206D02* +X148792794Y-73355735D01* X147973477Y-68160000D02* X147965686Y-68160000D01* -X154400000Y-85000000D02* -X154400000Y-81590785D01* +X148792794Y-73355735D02* +X148555735Y-73355735D01* X130225000Y-158200000D02* X129925000Y-158500000D01* -X154400000Y-81590785D02* -X154500000Y-81490785D01* -X148400000Y-72900000D02* -X148400000Y-68586522D01* +X148555735Y-73355735D02* +X148400000Y-73200000D01* +X154500000Y-77700000D02* +X152000000Y-75200000D01* X125725000Y-154225000D02* X125725000Y-155000000D01* +X147800000Y-67710000D02* +X146750000Y-67710000D01* +X147965686Y-68160000D02* +X147865685Y-68060000D01* +X152000000Y-75200000D02* +X151100000Y-75200000D01* X125307179Y-152600000D02* X125307179Y-153807179D01* -X151748529Y-74400000D02* -X151251471Y-74400000D01* -X154500000Y-81490785D02* -X154500000Y-77151471D01* +X149355735Y-74155735D02* +X149144265Y-73944265D01* +X150251471Y-74400000D02* +X150052843Y-74598628D01* +X149144265Y-73944265D02* +X149144265Y-73707206D01* +X146750000Y-67710000D02* +X146750000Y-67190000D01* X127775000Y-157050000D02* X127775000Y-155755000D01* X127775000Y-155755000D02* @@ -2246,45 +2262,43 @@ X129925000Y-158500000D02* X128075000Y-158500000D01* X128075000Y-158500000D02* X127775000Y-158200000D01* +X147865685Y-68060000D02* +X147800000Y-68060000D01* +X151100000Y-74751471D02* +X150748529Y-74400000D01* X125725000Y-155000000D02* X127775000Y-157050000D01* -X148400000Y-68586522D02* -X147973477Y-68160000D01* -X150351471Y-73500000D02* -X149000000Y-73500000D01* -X147800000Y-68060000D02* -X147800000Y-67710000D01* +X150052843Y-74598628D02* +X149609950Y-74155735D01* +X154400000Y-85000000D02* +X154400000Y-81590785D01* +X148400000Y-73200000D02* +X148400000Y-68586522D01* +X154400000Y-81590785D02* +X154500000Y-81490785D01* +X154500000Y-81490785D02* +X154500000Y-77700000D01* +X149609950Y-74155735D02* +X149355735Y-74155735D01* +X150748529Y-74400000D02* +X150251471Y-74400000D01* X125307179Y-153807179D02* X125725000Y-154225000D01* -X151251471Y-74400000D02* -X150351471Y-73500000D01* +X151100000Y-75200000D02* +X151100000Y-74751471D01* +X147800000Y-68060000D02* +X147800000Y-67710000D01* X127775000Y-158200000D02* X127775000Y-157300000D01* -X147965686Y-68160000D02* -X147865685Y-68060000D01* -X147865685Y-68060000D02* -X147800000Y-68060000D01* -X154500000Y-77151471D02* -X151748529Y-74400000D01* X130225000Y-157300000D02* X130225000Y-158200000D01* -X147800000Y-67710000D02* -X146750000Y-67710000D01* -X146750000Y-67710000D02* -X146750000Y-67190000D01* %TO.N,/MCU_Core/STAT1*% X129600000Y-117300000D02* X128100000Y-118800000D01* X127400000Y-104400000D02* X127400000Y-114051471D01* -X133250000Y-71850000D02* -X133350000Y-71750000D01* -X133350000Y-71750000D02* -X133350000Y-67150000D01* X127400000Y-114051471D02* X129600000Y-116251471D01* -X133350000Y-67150000D02* -X134580000Y-65920000D01* X128100000Y-118800000D02* X127900000Y-118800000D01* X127900000Y-118800000D02* @@ -2293,8 +2307,12 @@ X129600000Y-116251471D02* X129600000Y-117300000D01* X134580000Y-65920000D02* X146750000Y-65920000D01* +X133350000Y-70000000D02* +X133350000Y-67150000D01* X128100000Y-103700000D02* X127400000Y-104400000D01* +X133350000Y-67150000D02* +X134580000Y-65920000D01* X126975735Y-119724265D02* X126624265Y-119724265D01* %TO.N,/RGB_LED/RGB_DIN_R*% @@ -2349,10 +2367,12 @@ X129630000Y-152931076D01* X137750000Y-151500000D02* X138250000Y-152000000D01* %TO.N,VSYS*% -X124580000Y-88080000D02* -X124600000Y-88100000D01* +X125380735Y-89000735D02* +X125480000Y-89100000D01* X142200000Y-119500000D02* X141800000Y-119100000D01* +X124720253Y-89000735D02* +X125380735Y-89000735D01* X136200000Y-116100000D02* X136200000Y-108275000D01* X141800000Y-119100000D02* @@ -2361,16 +2381,16 @@ X136200000Y-108275000D02* X136275000Y-108200000D01* X139024499Y-119100000D02* X139000000Y-119124499D01* -X124580000Y-87000000D02* -X124580000Y-88080000D01* X143600000Y-124150000D02* X143798529Y-124150000D01* +X124659759Y-89061229D02* +X124720253Y-89000735D01* X149350000Y-129701471D02* X149350000Y-130760000D01* X143798529Y-124150000D02* X149350000Y-129701471D01* %TO.N,/Power_Buck/PWR_EN*% -D57* +D56* X149000000Y-112000000D02* X146500000Y-114500000D01* X146500000Y-114500000D02* diff --git a/PCB/production/gerbers/snips_controller-F_Mask.gbr b/PCB/production/gerbers/snips_controller-F_Mask.gbr index cce367a..c627d5a 100644 --- a/PCB/production/gerbers/snips_controller-F_Mask.gbr +++ b/PCB/production/gerbers/snips_controller-F_Mask.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Soldermask,Top*% %TF.FilePolarity,Negative*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -32,28 +32,28 @@ G04 Aperture macros list end* %ADD10C,2.700000*% %ADD11C,1.431000*% %ADD12RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% -%ADD13RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% -%ADD14RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% -%ADD15C,2.000000*% -%ADD16RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% -%ADD17RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% -%ADD18RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% -%ADD19C,0.900000*% -%ADD20RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% -%ADD21RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% -%ADD22RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% -%ADD23RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% -%ADD24R,1.500000X0.900000*% -%ADD25R,0.900000X1.500000*% -%ADD26R,0.900000X0.900000*% -%ADD27RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% -%ADD28RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% -%ADD29RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% -%ADD30RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% -%ADD31RoundRect,0.150000X-0.150000X-0.625000X0.150000X-0.625000X0.150000X0.625000X-0.150000X0.625000X0*% -%ADD32RoundRect,0.250000X-0.350000X-0.650000X0.350000X-0.650000X0.350000X0.650000X-0.350000X0.650000X0*% -%ADD33RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% -%ADD34RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD13C,0.900000*% +%ADD14RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% +%ADD15RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% +%ADD16RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% +%ADD17RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% +%ADD18RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD19C,2.000000*% +%ADD20RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% +%ADD21RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% +%ADD22RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% +%ADD23R,1.500000X0.900000*% +%ADD24R,0.900000X1.500000*% +%ADD25R,0.900000X0.900000*% +%ADD26RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% +%ADD27RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% +%ADD28RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% +%ADD29RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% +%ADD30RoundRect,0.150000X0.150000X0.625000X-0.150000X0.625000X-0.150000X-0.625000X0.150000X-0.625000X0*% +%ADD31RoundRect,0.250000X0.350000X0.650000X-0.350000X0.650000X-0.350000X-0.650000X0.350000X-0.650000X0*% +%ADD32RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% +%ADD33RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD34RoundRect,0.140000X-0.140000X-0.170000X0.140000X-0.170000X0.140000X0.170000X-0.140000X0.170000X0*% %ADD35RoundRect,0.250000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0*% %ADD36RoundRect,0.187500X0.712500X-0.187500X0.712500X0.187500X-0.712500X0.187500X-0.712500X-0.187500X0*% %ADD37RoundRect,0.150000X0.750000X-0.150000X0.750000X0.150000X-0.750000X0.150000X-0.750000X-0.150000X0*% @@ -66,15 +66,14 @@ G04 Aperture macros list end* %ADD44C,2.750000*% %ADD45C,2.250000*% %ADD46C,2.450000*% -%ADD47RoundRect,0.225000X0.250000X-0.225000X0.250000X0.225000X-0.250000X0.225000X-0.250000X-0.225000X0*% -%ADD48RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% -%ADD49RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% -%ADD50RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% -%ADD51RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% -%ADD52RoundRect,0.250000X0.350000X0.625000X-0.350000X0.625000X-0.350000X-0.625000X0.350000X-0.625000X0*% -%ADD53O,1.200000X1.750000*% -%ADD54R,1.050000X1.500000*% -%ADD55O,1.050000X1.500000*% +%ADD47RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% +%ADD48RoundRect,0.225000X0.225000X0.250000X-0.225000X0.250000X-0.225000X-0.250000X0.225000X-0.250000X0*% +%ADD49RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD50RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% +%ADD51RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% +%ADD52RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% +%ADD53RoundRect,0.250000X0.350000X0.625000X-0.350000X0.625000X-0.350000X-0.625000X0.350000X-0.625000X0*% +%ADD54O,1.200000X1.750000*% G04 APERTURE END LIST* D10* %TO.C,MH4*% @@ -108,21 +107,35 @@ D12* X134500000Y-112500000D03* X140500000Y-112500000D03* %TD*% +D13* +%TO.C,SW_TRIG_DIG2*% +X153475000Y-61750000D03* +X149225000Y-61750000D03* +D14* +X152575000Y-62650000D03* +X150125000Y-62650000D03* +D15* +X151350000Y-62650000D03* +D16* +X153200000Y-60700000D03* +X149500000Y-60700000D03* +%TD*% +D12* %TO.C,SW_MACRO5*% X134500000Y-121250000D03* X140500000Y-121250000D03* %TD*% -D13* +D17* %TO.C,R_XBEE_RST1*% X137760000Y-130000000D03* X136740000Y-130000000D03* %TD*% -D14* +D18* %TO.C,C_XBEE_RC1*% X135210000Y-131250000D03* X134250000Y-131250000D03* %TD*% -D15* +D19* %TO.C,FID1*% X123000000Y-95000000D03* %TD*% @@ -131,7 +144,7 @@ D12* X144750000Y-121250000D03* X150750000Y-121250000D03* %TD*% -D16* +D20* %TO.C,C_RGB1*% X150500000Y-153230000D03* X150500000Y-152270000D03* @@ -141,48 +154,48 @@ D12* X144750000Y-112500000D03* X150750000Y-112500000D03* %TD*% -D17* +D21* %TO.C,C_XBEE_VCC1*% X141000000Y-129020000D03* X141000000Y-129980000D03* %TD*% -D13* +D17* %TO.C,R_XBEE_RC1*% X135260000Y-130000000D03* X134240000Y-130000000D03* %TD*% -D18* +D22* %TO.C,R_USB_DM1*% X127750000Y-154270000D03* X127750000Y-153250000D03* %TD*% D10* %TO.C,MH1*% -X123400000Y-81400000D03* +X123300000Y-69200000D03* %TD*% -D19* +D13* %TO.C,SW_TRIG_DIG1*% -X126850000Y-61750000D03* -X122600000Y-61750000D03* -D20* -X125950000Y-62650000D03* -X123500000Y-62650000D03* -D21* -X124725000Y-62650000D03* -D22* -X126575000Y-60700000D03* -X122875000Y-60700000D03* +X125775000Y-61750000D03* +X121525000Y-61750000D03* +D14* +X124875000Y-62650000D03* +X122425000Y-62650000D03* +D15* +X123650000Y-62650000D03* +D16* +X125500000Y-60700000D03* +X121800000Y-60700000D03* %TD*% D10* %TO.C,MH2*% -X151600000Y-70000000D03* +X151700000Y-69200000D03* %TD*% -D23* +D17* %TO.C,R_EN_PU1*% -X127200000Y-78050000D03* -X127200000Y-79070000D03* +X127400000Y-67400000D03* +X126380000Y-67400000D03* %TD*% -D24* +D23* %TO.C,U_MCU1*% X129250000Y-64650000D03* X129250000Y-65920000D03* @@ -198,7 +211,7 @@ X129250000Y-77350000D03* X129250000Y-78620000D03* X129250000Y-79890000D03* X129250000Y-81160000D03* -D25* +D24* X131015000Y-82410000D03* X132285000Y-82410000D03* X133555000Y-82410000D03* @@ -211,7 +224,7 @@ X141175000Y-82410000D03* X142445000Y-82410000D03* X143715000Y-82410000D03* X144985000Y-82410000D03* -D24* +D23* X146750000Y-81160000D03* X146750000Y-79890000D03* X146750000Y-78620000D03* @@ -226,7 +239,7 @@ X146750000Y-68460000D03* X146750000Y-67190000D03* X146750000Y-65920000D03* X146750000Y-64650000D03* -D26* +D25* X135100000Y-70970000D03* X135100000Y-72370000D03* X135100000Y-73770000D03* @@ -239,50 +252,50 @@ X137900000Y-70970000D03* X137900000Y-72370000D03* X137900000Y-73770000D03* %TD*% -D19* +D13* %TO.C,SW_THR_UP1*% X121750000Y-88375000D03* X121750000Y-92625000D03* -D27* +D26* X122650000Y-89275000D03* X122650000Y-91725000D03* -D28* +D27* X122650000Y-90500000D03* -D29* +D28* X120700000Y-88650000D03* X120700000Y-92350000D03* %TD*% -D30* +D29* %TO.C,D_RGB1*% X147500000Y-157550000D03* X147500000Y-155750000D03* X144200000Y-155750000D03* X144200000Y-157550000D03* %TD*% -D31* +D30* %TO.C,U_OLED1*% -X122500000Y-69000000D03* -X123500000Y-69000000D03* -X124500000Y-69000000D03* -X125500000Y-69000000D03* -D32* -X121200000Y-72875000D03* -X126800000Y-72875000D03* +X125600000Y-82800000D03* +X124600000Y-82800000D03* +X123600000Y-82800000D03* +X122600000Y-82800000D03* +D31* +X126900000Y-78925000D03* +X121300000Y-78925000D03* %TD*% -D33* +D32* %TO.C,R_CC2*% X143740000Y-152750000D03* X144760000Y-152750000D03* %TD*% -D34* +D33* %TO.C,C_XBEE_VCC4*% X142500000Y-133000000D03* X142500000Y-134550000D03* %TD*% -D14* +D34* %TO.C,C_OLED_2*% -X123480000Y-67000000D03* -X122520000Y-67000000D03* +X124800000Y-84625000D03* +X125760000Y-84625000D03* %TD*% D35* %TO.C,SW_BOOT1*% @@ -291,7 +304,7 @@ X151650000Y-145525000D03* X153350000Y-150675000D03* X153350000Y-145525000D03* %TD*% -D19* +D13* %TO.C,SW_VOL_DN1*% X153200000Y-102650000D03* X153200000Y-98400000D03* @@ -343,7 +356,7 @@ X141820000Y-153970000D03* D43* X141820000Y-158150000D03* %TD*% -D34* +D33* %TO.C,C_XBEE_VCC2*% X143750000Y-129225000D03* X143750000Y-130775000D03* @@ -367,12 +380,12 @@ X140750000Y-101000000D03* X134250000Y-105500000D03* X140750000Y-105500000D03* %TD*% -D16* +D20* %TO.C,C_DBNC1*% X126500000Y-154480000D03* X126500000Y-153520000D03* %TD*% -D18* +D22* %TO.C,R_RGB1*% X148250000Y-153260000D03* X148250000Y-152240000D03* @@ -381,54 +394,54 @@ D10* %TO.C,MH3*% X123000000Y-156500000D03* %TD*% -D23* +D47* %TO.C,R_CC1*% X130250000Y-153250000D03* X130250000Y-154270000D03* %TD*% -D17* +D20* %TO.C,C_3V3_2*% -X127500000Y-64590000D03* -X127500000Y-65550000D03* +X127500000Y-65360000D03* +X127500000Y-64400000D03* %TD*% -D15* +D19* %TO.C,FID2*% X151300000Y-127300000D03* %TD*% -D47* +D48* %TO.C,C_3V3_1*% -X126000000Y-66275000D03* -X126000000Y-64725000D03* +X126150000Y-64700000D03* +X124600000Y-64700000D03* %TD*% -D33* +D32* %TO.C,R_VSYS1*% -X124580000Y-87000000D03* -X125600000Y-87000000D03* +X125480000Y-89100000D03* +X126500000Y-89100000D03* %TD*% -D18* +D22* %TO.C,R_USB_DP1*% X129000000Y-154270000D03* X129000000Y-153250000D03* %TD*% -D19* +D13* %TO.C,SW_THR_DN1*% X121750000Y-98400000D03* X121750000Y-102650000D03* -D27* +D26* X122650000Y-99300000D03* X122650000Y-101750000D03* -D28* +D27* X122650000Y-100525000D03* -D29* +D28* X120700000Y-98675000D03* X120700000Y-102375000D03* %TD*% -D17* +D21* %TO.C,C_XBEE_VCC3*% X142250000Y-129020000D03* X142250000Y-129980000D03* %TD*% -D19* +D13* %TO.C,SW_VOL_UP1*% X153200000Y-92625000D03* X153200000Y-88375000D03* @@ -441,69 +454,62 @@ D38* X154250000Y-92350000D03* X154250000Y-88650000D03* %TD*% -D48* +D49* %TO.C,C_OLED_1*% -X123450000Y-65500000D03* -X121550000Y-65500000D03* +X123900000Y-86300000D03* +X125800000Y-86300000D03* %TD*% D12* %TO.C,SW_MACRO1*% X124250000Y-112500000D03* X130250000Y-112500000D03* %TD*% -D13* +D17* %TO.C,R_VSYS2*% -X125590000Y-85800000D03* -X124570000Y-85800000D03* +X126500000Y-87900000D03* +X125480000Y-87900000D03* %TD*% -D15* +D19* %TO.C,FID3*% X147000000Y-150100000D03* %TD*% -D17* +D21* %TO.C,C_STICK1*% X148500000Y-92520000D03* X148500000Y-93480000D03* %TD*% -D23* +D47* %TO.C,R_XBEE_ATTN_PU1*% X139600000Y-146780000D03* X139600000Y-147800000D03* %TD*% -D19* +D13* %TO.C,SW_PWR1*% X126875000Y-157950000D03* X131125000Y-157950000D03* -D49* +D50* X127775000Y-157050000D03* X130225000Y-157050000D03* -D50* -X129000000Y-157050000D03* D51* +X129000000Y-157050000D03* +D52* X127150000Y-159000000D03* X130850000Y-159000000D03* %TD*% -D16* +D18* %TO.C,C_3V3_3*% -X127300000Y-67660000D03* -X127300000Y-66700000D03* +X127400000Y-66400000D03* +X126440000Y-66400000D03* %TD*% -D23* +D47* %TO.C,R_BOOT_PU1*% X148500000Y-82230000D03* X148500000Y-83250000D03* %TD*% -D52* +D53* %TO.C,BT1*% X152500000Y-77500000D03* -D53* -X150500000Y-77500000D03* -%TD*% D54* -%TO.C,U_HALL1*% -X152700000Y-63000000D03* -D55* -X151430000Y-63000000D03* -X150160000Y-63000000D03* +X150500000Y-77500000D03* %TD*% M02* diff --git a/PCB/production/gerbers/snips_controller-F_Paste.gbr b/PCB/production/gerbers/snips_controller-F_Paste.gbr index c6b2658..f655f41 100644 --- a/PCB/production/gerbers/snips_controller-F_Paste.gbr +++ b/PCB/production/gerbers/snips_controller-F_Paste.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Paste,Top*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -30,53 +30,65 @@ G04 Aperture macros list* 20,1,$1+$1,$8,$9,$2,$3,0*% G04 Aperture macros list end* %ADD10RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% -%ADD11RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% -%ADD12RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% -%ADD13RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% -%ADD14RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% -%ADD15RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% -%ADD16RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% -%ADD17RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% -%ADD18RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% -%ADD19RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% -%ADD20R,1.500000X0.900000*% -%ADD21R,0.900000X1.500000*% -%ADD22R,0.900000X0.900000*% -%ADD23RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% -%ADD24RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% -%ADD25RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% -%ADD26RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% -%ADD27RoundRect,0.150000X-0.150000X-0.625000X0.150000X-0.625000X0.150000X0.625000X-0.150000X0.625000X0*% -%ADD28RoundRect,0.250000X-0.350000X-0.650000X0.350000X-0.650000X0.350000X0.650000X-0.350000X0.650000X0*% -%ADD29RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% -%ADD30RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD11RoundRect,0.187500X0.187500X0.712500X-0.187500X0.712500X-0.187500X-0.712500X0.187500X-0.712500X0*% +%ADD12RoundRect,0.150000X0.150000X0.750000X-0.150000X0.750000X-0.150000X-0.750000X0.150000X-0.750000X0*% +%ADD13RoundRect,0.225000X0.425000X0.225000X-0.425000X0.225000X-0.425000X-0.225000X0.425000X-0.225000X0*% +%ADD14RoundRect,0.135000X0.135000X0.185000X-0.135000X0.185000X-0.135000X-0.185000X0.135000X-0.185000X0*% +%ADD15RoundRect,0.140000X0.140000X0.170000X-0.140000X0.170000X-0.140000X-0.170000X0.140000X-0.170000X0*% +%ADD16RoundRect,0.140000X0.170000X-0.140000X0.170000X0.140000X-0.170000X0.140000X-0.170000X-0.140000X0*% +%ADD17RoundRect,0.140000X-0.170000X0.140000X-0.170000X-0.140000X0.170000X-0.140000X0.170000X0.140000X0*% +%ADD18RoundRect,0.135000X0.185000X-0.135000X0.185000X0.135000X-0.185000X0.135000X-0.185000X-0.135000X0*% +%ADD19R,1.500000X0.900000*% +%ADD20R,0.900000X1.500000*% +%ADD21R,0.900000X0.900000*% +%ADD22RoundRect,0.187500X-0.712500X0.187500X-0.712500X-0.187500X0.712500X-0.187500X0.712500X0.187500X0*% +%ADD23RoundRect,0.150000X-0.750000X0.150000X-0.750000X-0.150000X0.750000X-0.150000X0.750000X0.150000X0*% +%ADD24RoundRect,0.225000X-0.225000X0.425000X-0.225000X-0.425000X0.225000X-0.425000X0.225000X0.425000X0*% +%ADD25RoundRect,0.150000X-0.600000X-0.350000X0.600000X-0.350000X0.600000X0.350000X-0.600000X0.350000X0*% +%ADD26RoundRect,0.150000X0.150000X0.625000X-0.150000X0.625000X-0.150000X-0.625000X0.150000X-0.625000X0*% +%ADD27RoundRect,0.250000X0.350000X0.650000X-0.350000X0.650000X-0.350000X-0.650000X0.350000X-0.650000X0*% +%ADD28RoundRect,0.135000X-0.135000X-0.185000X0.135000X-0.185000X0.135000X0.185000X-0.135000X0.185000X0*% +%ADD29RoundRect,0.225000X-0.250000X0.225000X-0.250000X-0.225000X0.250000X-0.225000X0.250000X0.225000X0*% +%ADD30RoundRect,0.140000X-0.140000X-0.170000X0.140000X-0.170000X0.140000X0.170000X-0.140000X0.170000X0*% %ADD31RoundRect,0.250000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0*% %ADD32RoundRect,0.187500X0.712500X-0.187500X0.712500X0.187500X-0.712500X0.187500X-0.712500X-0.187500X0*% %ADD33RoundRect,0.150000X0.750000X-0.150000X0.750000X0.150000X-0.750000X0.150000X-0.750000X-0.150000X0*% %ADD34RoundRect,0.225000X0.225000X-0.425000X0.225000X0.425000X-0.225000X0.425000X-0.225000X-0.425000X0*% %ADD35RoundRect,0.150000X-0.150000X-0.575000X0.150000X-0.575000X0.150000X0.575000X-0.150000X0.575000X0*% %ADD36RoundRect,0.075000X-0.075000X-0.650000X0.075000X-0.650000X0.075000X0.650000X-0.075000X0.650000X0*% -%ADD37RoundRect,0.225000X0.250000X-0.225000X0.250000X0.225000X-0.250000X0.225000X-0.250000X-0.225000X0*% -%ADD38RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% -%ADD39RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% -%ADD40RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% -%ADD41RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% +%ADD37RoundRect,0.135000X-0.185000X0.135000X-0.185000X-0.135000X0.185000X-0.135000X0.185000X0.135000X0*% +%ADD38RoundRect,0.225000X0.225000X0.250000X-0.225000X0.250000X-0.225000X-0.250000X0.225000X-0.250000X0*% +%ADD39RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD40RoundRect,0.187500X-0.187500X-0.712500X0.187500X-0.712500X0.187500X0.712500X-0.187500X0.712500X0*% +%ADD41RoundRect,0.150000X-0.150000X-0.750000X0.150000X-0.750000X0.150000X0.750000X-0.150000X0.750000X0*% +%ADD42RoundRect,0.225000X-0.425000X-0.225000X0.425000X-0.225000X0.425000X0.225000X-0.425000X0.225000X0*% G04 APERTURE END LIST* D10* %TO.C,SW_MACRO2*% X134500000Y-112500000D03* X140500000Y-112500000D03* %TD*% +D11* +%TO.C,SW_TRIG_DIG2*% +X152575000Y-62650000D03* +X150125000Y-62650000D03* +D12* +X151350000Y-62650000D03* +D13* +X153200000Y-60700000D03* +X149500000Y-60700000D03* +%TD*% +D10* %TO.C,SW_MACRO5*% X134500000Y-121250000D03* X140500000Y-121250000D03* %TD*% -D11* +D14* %TO.C,R_XBEE_RST1*% X137760000Y-130000000D03* X136740000Y-130000000D03* %TD*% -D12* +D15* %TO.C,C_XBEE_RC1*% X135210000Y-131250000D03* X134250000Y-131250000D03* @@ -86,7 +98,7 @@ D10* X144750000Y-121250000D03* X150750000Y-121250000D03* %TD*% -D13* +D16* %TO.C,C_RGB1*% X150500000Y-153230000D03* X150500000Y-152270000D03* @@ -96,37 +108,37 @@ D10* X144750000Y-112500000D03* X150750000Y-112500000D03* %TD*% -D14* +D17* %TO.C,C_XBEE_VCC1*% X141000000Y-129020000D03* X141000000Y-129980000D03* %TD*% -D11* +D14* %TO.C,R_XBEE_RC1*% X135260000Y-130000000D03* X134240000Y-130000000D03* %TD*% -D15* +D18* %TO.C,R_USB_DM1*% X127750000Y-154270000D03* X127750000Y-153250000D03* %TD*% -D16* +D11* %TO.C,SW_TRIG_DIG1*% -X125950000Y-62650000D03* -X123500000Y-62650000D03* -D17* -X124725000Y-62650000D03* -D18* -X126575000Y-60700000D03* -X122875000Y-60700000D03* +X124875000Y-62650000D03* +X122425000Y-62650000D03* +D12* +X123650000Y-62650000D03* +D13* +X125500000Y-60700000D03* +X121800000Y-60700000D03* %TD*% -D19* +D14* %TO.C,R_EN_PU1*% -X127200000Y-78050000D03* -X127200000Y-79070000D03* +X127400000Y-67400000D03* +X126380000Y-67400000D03* %TD*% -D20* +D19* %TO.C,U_MCU1*% X129250000Y-64650000D03* X129250000Y-65920000D03* @@ -142,7 +154,7 @@ X129250000Y-77350000D03* X129250000Y-78620000D03* X129250000Y-79890000D03* X129250000Y-81160000D03* -D21* +D20* X131015000Y-82410000D03* X132285000Y-82410000D03* X133555000Y-82410000D03* @@ -155,7 +167,7 @@ X141175000Y-82410000D03* X142445000Y-82410000D03* X143715000Y-82410000D03* X144985000Y-82410000D03* -D20* +D19* X146750000Y-81160000D03* X146750000Y-79890000D03* X146750000Y-78620000D03* @@ -170,7 +182,7 @@ X146750000Y-68460000D03* X146750000Y-67190000D03* X146750000Y-65920000D03* X146750000Y-64650000D03* -D22* +D21* X135100000Y-70970000D03* X135100000Y-72370000D03* X135100000Y-73770000D03* @@ -183,47 +195,47 @@ X137900000Y-70970000D03* X137900000Y-72370000D03* X137900000Y-73770000D03* %TD*% -D23* +D22* %TO.C,SW_THR_UP1*% X122650000Y-89275000D03* X122650000Y-91725000D03* -D24* +D23* X122650000Y-90500000D03* -D25* +D24* X120700000Y-88650000D03* X120700000Y-92350000D03* %TD*% -D26* +D25* %TO.C,D_RGB1*% X147500000Y-157550000D03* X147500000Y-155750000D03* X144200000Y-155750000D03* X144200000Y-157550000D03* %TD*% -D27* +D26* %TO.C,U_OLED1*% -X122500000Y-69000000D03* -X123500000Y-69000000D03* -X124500000Y-69000000D03* -X125500000Y-69000000D03* -D28* -X121200000Y-72875000D03* -X126800000Y-72875000D03* +X125600000Y-82800000D03* +X124600000Y-82800000D03* +X123600000Y-82800000D03* +X122600000Y-82800000D03* +D27* +X126900000Y-78925000D03* +X121300000Y-78925000D03* %TD*% -D29* +D28* %TO.C,R_CC2*% X143740000Y-152750000D03* X144760000Y-152750000D03* %TD*% -D30* +D29* %TO.C,C_XBEE_VCC4*% X142500000Y-133000000D03* X142500000Y-134550000D03* %TD*% -D12* +D30* %TO.C,C_OLED_2*% -X123480000Y-67000000D03* -X122520000Y-67000000D03* +X124800000Y-84625000D03* +X125760000Y-84625000D03* %TD*% D31* %TO.C,SW_BOOT1*% @@ -270,57 +282,57 @@ D35* X135050000Y-153055000D03* X134250000Y-153055000D03* %TD*% -D30* +D29* %TO.C,C_XBEE_VCC2*% X143750000Y-129225000D03* X143750000Y-130775000D03* %TD*% -D13* +D16* %TO.C,C_DBNC1*% X126500000Y-154480000D03* X126500000Y-153520000D03* %TD*% -D15* +D18* %TO.C,R_RGB1*% X148250000Y-153260000D03* X148250000Y-152240000D03* %TD*% -D19* +D37* %TO.C,R_CC1*% X130250000Y-153250000D03* X130250000Y-154270000D03* %TD*% -D14* +D16* %TO.C,C_3V3_2*% -X127500000Y-64590000D03* -X127500000Y-65550000D03* +X127500000Y-65360000D03* +X127500000Y-64400000D03* %TD*% -D37* +D38* %TO.C,C_3V3_1*% -X126000000Y-66275000D03* -X126000000Y-64725000D03* +X126150000Y-64700000D03* +X124600000Y-64700000D03* %TD*% -D29* +D28* %TO.C,R_VSYS1*% -X124580000Y-87000000D03* -X125600000Y-87000000D03* +X125480000Y-89100000D03* +X126500000Y-89100000D03* %TD*% -D15* +D18* %TO.C,R_USB_DP1*% X129000000Y-154270000D03* X129000000Y-153250000D03* %TD*% -D23* +D22* %TO.C,SW_THR_DN1*% X122650000Y-99300000D03* X122650000Y-101750000D03* -D24* +D23* X122650000Y-100525000D03* -D25* +D24* X120700000Y-98675000D03* X120700000Y-102375000D03* %TD*% -D14* +D17* %TO.C,C_XBEE_VCC3*% X142250000Y-129020000D03* X142250000Y-129980000D03* @@ -335,47 +347,47 @@ D34* X154250000Y-92350000D03* X154250000Y-88650000D03* %TD*% -D38* +D39* %TO.C,C_OLED_1*% -X123450000Y-65500000D03* -X121550000Y-65500000D03* +X123900000Y-86300000D03* +X125800000Y-86300000D03* %TD*% D10* %TO.C,SW_MACRO1*% X124250000Y-112500000D03* X130250000Y-112500000D03* %TD*% -D11* +D14* %TO.C,R_VSYS2*% -X125590000Y-85800000D03* -X124570000Y-85800000D03* +X126500000Y-87900000D03* +X125480000Y-87900000D03* %TD*% -D14* +D17* %TO.C,C_STICK1*% X148500000Y-92520000D03* X148500000Y-93480000D03* %TD*% -D19* +D37* %TO.C,R_XBEE_ATTN_PU1*% X139600000Y-146780000D03* X139600000Y-147800000D03* %TD*% -D39* +D40* %TO.C,SW_PWR1*% X127775000Y-157050000D03* X130225000Y-157050000D03* -D40* -X129000000Y-157050000D03* D41* +X129000000Y-157050000D03* +D42* X127150000Y-159000000D03* X130850000Y-159000000D03* %TD*% -D13* +D15* %TO.C,C_3V3_3*% -X127300000Y-67660000D03* -X127300000Y-66700000D03* +X127400000Y-66400000D03* +X126440000Y-66400000D03* %TD*% -D19* +D37* %TO.C,R_BOOT_PU1*% X148500000Y-82230000D03* X148500000Y-83250000D03* diff --git a/PCB/production/gerbers/snips_controller-F_Silkscreen.gbr b/PCB/production/gerbers/snips_controller-F_Silkscreen.gbr index ffdba61..2d1cc16 100644 --- a/PCB/production/gerbers/snips_controller-F_Silkscreen.gbr +++ b/PCB/production/gerbers/snips_controller-F_Silkscreen.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Legend,Top*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -17,66 +17,6 @@ G04 APERTURE LIST* %ADD13C,0.200000*% G04 APERTURE END LIST* D10* -X149856265Y-61946895D02* -X149856265Y-61146895D01* -X149856265Y-61146895D02* -X150046741Y-61146895D01* -X150046741Y-61146895D02* -X150161027Y-61184990D01* -X150161027Y-61184990D02* -X150237217Y-61261180D01* -X150237217Y-61261180D02* -X150275312Y-61337371D01* -X150275312Y-61337371D02* -X150313408Y-61489752D01* -X150313408Y-61489752D02* -X150313408Y-61604038D01* -X150313408Y-61604038D02* -X150275312Y-61756419D01* -X150275312Y-61756419D02* -X150237217Y-61832609D01* -X150237217Y-61832609D02* -X150161027Y-61908800D01* -X150161027Y-61908800D02* -X150046741Y-61946895D01* -X150046741Y-61946895D02* -X149856265Y-61946895D01* -X151684836Y-61184990D02* -X151608646Y-61146895D01* -X151608646Y-61146895D02* -X151494360Y-61146895D01* -X151494360Y-61146895D02* -X151380074Y-61184990D01* -X151380074Y-61184990D02* -X151303884Y-61261180D01* -X151303884Y-61261180D02* -X151265789Y-61337371D01* -X151265789Y-61337371D02* -X151227693Y-61489752D01* -X151227693Y-61489752D02* -X151227693Y-61604038D01* -X151227693Y-61604038D02* -X151265789Y-61756419D01* -X151265789Y-61756419D02* -X151303884Y-61832609D01* -X151303884Y-61832609D02* -X151380074Y-61908800D01* -X151380074Y-61908800D02* -X151494360Y-61946895D01* -X151494360Y-61946895D02* -X151570551Y-61946895D01* -X151570551Y-61946895D02* -X151684836Y-61908800D01* -X151684836Y-61908800D02* -X151722932Y-61870704D01* -X151722932Y-61870704D02* -X151722932Y-61604038D01* -X151722932Y-61604038D02* -X151570551Y-61604038D01* -X152561027Y-61146895D02* -X152827694Y-61946895D01* -X152827694Y-61946895D02* -X153094360Y-61146895D01* X125605132Y-74768169D02* X125567036Y-74882455D01* X125567036Y-74882455D02* @@ -1520,6 +1460,17 @@ X140650000Y-110500000D02* X140650000Y-111200000D01* X140650000Y-114500000D02* X140650000Y-113800000D01* +%TO.C,SW_TRIG_DIG2*% +X148950000Y-63250000D02* +X148950000Y-62250000D01* +X149550000Y-63250000D02* +X148950000Y-63250000D01* +X152350000Y-60450000D02* +X150350000Y-60450000D01* +X153150000Y-63250000D02* +X153750000Y-63250000D01* +X153750000Y-63250000D02* +X153750000Y-62250000D01* %TO.C,SW_MACRO5*% X134350000Y-119269000D02* X135500000Y-118100000D01* @@ -1614,21 +1565,21 @@ X127370000Y-153606359D01* X128130000Y-153913641D02* X128130000Y-153606359D01* %TO.C,SW_TRIG_DIG1*% -X122325000Y-63250000D02* -X122325000Y-62250000D01* -X122925000Y-63250000D02* -X122325000Y-63250000D01* -X125725000Y-60450000D02* -X123725000Y-60450000D01* -X126525000Y-63250000D02* -X127125000Y-63250000D01* -X127125000Y-63250000D02* -X127125000Y-62250000D01* +X121250000Y-63250000D02* +X121250000Y-62250000D01* +X121850000Y-63250000D02* +X121250000Y-63250000D01* +X124650000Y-60450000D02* +X122650000Y-60450000D01* +X125450000Y-63250000D02* +X126050000Y-63250000D01* +X126050000Y-63250000D02* +X126050000Y-62250000D01* %TO.C,R_EN_PU1*% -X126820000Y-78406359D02* -X126820000Y-78713641D01* -X127580000Y-78406359D02* -X127580000Y-78713641D01* +X127043641Y-67020000D02* +X126736359Y-67020000D01* +X127043641Y-67780000D02* +X126736359Y-67780000D01* %TO.C,U_MCU1*% X129000000Y-57160000D02* X129000000Y-63910000D01* @@ -1676,18 +1627,18 @@ X147950000Y-158400000D01* X148150000Y-158700000D01* G37* %TO.C,U_OLED1*% -X120890000Y-69215000D02* -X121940000Y-69215000D01* -X120890000Y-71715000D02* -X120890000Y-69215000D01* -X121940000Y-69215000D02* -X121940000Y-68225000D01* -X122060000Y-73685000D02* -X125940000Y-73685000D01* -X127110000Y-69215000D02* -X126060000Y-69215000D01* -X127110000Y-71715000D02* -X127110000Y-69215000D01* +X120990000Y-80085000D02* +X120990000Y-82585000D01* +X120990000Y-82585000D02* +X122040000Y-82585000D01* +X126040000Y-78115000D02* +X122160000Y-78115000D01* +X126160000Y-82585000D02* +X126160000Y-83575000D01* +X127210000Y-80085000D02* +X127210000Y-82585000D01* +X127210000Y-82585000D02* +X126160000Y-82585000D01* %TO.C,R_CC2*% X144096359Y-152370000D02* X144403641Y-152370000D01* @@ -1699,10 +1650,10 @@ X141990000Y-133915580D01* X143010000Y-133634420D02* X143010000Y-133915580D01* %TO.C,C_OLED_2*% -X123107836Y-66640000D02* -X122892164Y-66640000D01* -X123107836Y-67360000D02* -X122892164Y-67360000D01* +X125172164Y-84265000D02* +X125387836Y-84265000D01* +X125172164Y-84985000D02* +X125387836Y-84985000D01* %TO.C,SW_BOOT1*% X150640000Y-145640000D02* X150640000Y-150560000D01* @@ -1810,20 +1761,20 @@ X129870000Y-153913641D01* X130630000Y-153606359D02* X130630000Y-153913641D01* %TO.C,C_3V3_2*% -X127140000Y-64962164D02* -X127140000Y-65177836D01* -X127860000Y-64962164D02* -X127860000Y-65177836D01* +X127140000Y-64987836D02* +X127140000Y-64772164D01* +X127860000Y-64987836D02* +X127860000Y-64772164D01* %TO.C,C_3V3_1*% -X125490000Y-65640580D02* -X125490000Y-65359420D01* -X126510000Y-65640580D02* -X126510000Y-65359420D01* +X125515580Y-64190000D02* +X125234420Y-64190000D01* +X125515580Y-65210000D02* +X125234420Y-65210000D01* %TO.C,R_VSYS1*% -X124936359Y-86620000D02* -X125243641Y-86620000D01* -X124936359Y-87380000D02* -X125243641Y-87380000D01* +X125836359Y-88720000D02* +X126143641Y-88720000D01* +X125836359Y-89480000D02* +X126143641Y-89480000D01* %TO.C,R_USB_DP1*% X128620000Y-153913641D02* X128620000Y-153606359D01* @@ -1857,10 +1808,10 @@ X152700000Y-92900000D01* X154500000Y-91500000D02* X154500000Y-89500000D01* %TO.C,C_OLED_1*% -X122761252Y-64765000D02* -X122238748Y-64765000D01* -X122761252Y-66235000D02* -X122238748Y-66235000D01* +X124588748Y-85565000D02* +X125111252Y-85565000D01* +X124588748Y-87035000D02* +X125111252Y-87035000D01* %TO.C,SW_MACRO1*% X124100000Y-110519000D02* X125250000Y-109350000D01* @@ -1883,10 +1834,10 @@ X130400000Y-111200000D01* X130400000Y-114500000D02* X130400000Y-113800000D01* %TO.C,R_VSYS2*% -X125233641Y-85420000D02* -X124926359Y-85420000D01* -X125233641Y-86180000D02* -X124926359Y-86180000D01* +X126143641Y-87520000D02* +X125836359Y-87520000D01* +X126143641Y-88280000D02* +X125836359Y-88280000D01* %TO.C,C_STICK1*% X148140000Y-92892164D02* X148140000Y-93107836D01* @@ -1909,10 +1860,10 @@ X131400000Y-156450000D01* X131400000Y-156450000D02* X131400000Y-157450000D01* %TO.C,C_3V3_3*% -X126940000Y-67287836D02* -X126940000Y-67072164D01* -X127660000Y-67287836D02* -X127660000Y-67072164D01* +X127027836Y-66040000D02* +X126812164Y-66040000D01* +X127027836Y-66760000D02* +X126812164Y-66760000D01* %TO.C,R_BOOT_PU1*% X148120000Y-82586359D02* X148120000Y-82893641D01* diff --git a/PCB/production/gerbers/snips_controller-In1_Cu.gbr b/PCB/production/gerbers/snips_controller-In1_Cu.gbr index 5811983..d7f34bc 100644 --- a/PCB/production/gerbers/snips_controller-In1_Cu.gbr +++ b/PCB/production/gerbers/snips_controller-In1_Cu.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Copper,L2,Inr*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -56,14 +56,8 @@ G04 Aperture macros list end* %TA.AperFunction,ComponentPad*% %ADD18C,0.300000*% %TD*% -%TA.AperFunction,ComponentPad*% -%ADD19R,1.050000X1.500000*% -%TD*% -%TA.AperFunction,ComponentPad*% -%ADD20O,1.050000X1.500000*% -%TD*% %TA.AperFunction,ViaPad*% -%ADD21C,0.600000*% +%ADD19C,0.600000*% %TD*% G04 APERTURE END LIST* D10* @@ -159,35 +153,26 @@ X133000000Y-119500000D03* %TD*% D19* %TO.N,3V3*% -%TO.C,U_HALL1*% -X152700000Y-63000000D03* -D20* -%TO.N,GND*% -X151430000Y-63000000D03* -%TO.N,/Hall_Trigger/TRIG_ANALOG*% -X150160000Y-63000000D03* -%TD*% -D21* -%TO.N,3V3*% +X140900000Y-72900000D03* X139342332Y-122557668D03* X122500000Y-107500000D03* X127110000Y-120400000D03* X151500000Y-153000000D03* +X122600000Y-86300000D03* X135500000Y-88000000D03* X149550000Y-132950000D03* X148000000Y-91500000D03* X142800000Y-79400000D03* X138600000Y-146500000D03* -X130750000Y-65000000D03* +X130800000Y-65900000D03* X137400000Y-79200000D03* -X126200000Y-78000000D03* X147500000Y-83000000D03* X140000000Y-75450000D03* %TO.N,XBEE_SLEEP_RQ*% X145400000Y-70950000D03* X131100000Y-87350000D03* %TO.N,GND*% -X121500000Y-67000000D03* +X123200000Y-64500000D03* X142500000Y-121250000D03* X133020634Y-117700000D03* X147500000Y-119000000D03* @@ -198,7 +183,7 @@ X138800000Y-75600000D03* X147500000Y-96500000D03* X126000000Y-153000000D03* X125000000Y-118000000D03* -X130750000Y-63750000D03* +X130800000Y-64700000D03* X121500000Y-112000000D03* X124000000Y-129000000D03* X128750000Y-121250000D03* @@ -207,7 +192,7 @@ X152750000Y-112500000D03* X133020634Y-120500000D03* X131050000Y-111200000D03* X135000000Y-104000000D03* -X124088235Y-90338235D03* +X124088235Y-90513235D03* X128000000Y-105500000D03* X139500000Y-118500000D03* X149800000Y-150800000D03* @@ -217,11 +202,11 @@ X145000000Y-123500000D03* X145250000Y-65100000D03* X123500000Y-124000000D03* X123500000Y-115500000D03* -X124400000Y-84800000D03* +X140700000Y-71800000D03* X152500000Y-121250000D03* +X124400000Y-88000000D03* X145800000Y-153300000D03* X150500000Y-90500000D03* -X139250000Y-73750000D03* X129000000Y-119000000D03* X150500000Y-100500000D03* X143600000Y-77200000D03* @@ -241,6 +226,9 @@ X128574265Y-102574265D03* %TO.N,/Buttons_Direct/BTN_MACRO2*% X143500000Y-84500000D03* X135816422Y-93425941D03* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X126700000Y-76900000D03* +X121700000Y-64100000D03* %TO.N,/Buttons_Direct/BTN_MACRO5*% X144000000Y-87000000D03* X133500000Y-116400000D03* @@ -252,20 +240,17 @@ X145000000Y-77000000D03* %TO.N,/Buttons_Direct/BTN_MACRO3*% X145500000Y-80500000D03* X145000000Y-109500000D03* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X127200000Y-75000000D03* -X122000000Y-63000000D03* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X130800000Y-67800000D03* +X133950000Y-70900000D03* %TO.N,/MCU_Core/STICK_X*% X137500000Y-81000000D03* %TO.N,/MCU_Core/STICK_Y*% X134800000Y-80752983D03* %TO.N,/MCU_Core/VSYS_SENSE*% -X123900000Y-71100000D03* -X127500000Y-71300000D03* +X125700000Y-73500000D03* +X126758949Y-84000000D03* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X125250000Y-90500000D03* +X125900000Y-90500000D03* X128000000Y-75500000D03* %TO.N,/Buttons_Direct/BTN_THR_DN*% X125340812Y-100424593D03* @@ -275,9 +260,9 @@ X133350000Y-76350000D03* %TO.N,ACCEL_INT1*% X133400000Y-80400000D03* %TO.N,/Accelerometer/I2C_SCL*% -X125374880Y-71699999D03* -X133350000Y-77150003D03* -X130900000Y-76950000D03* +X130950000Y-77200000D03* +X127624265Y-74175735D03* +X133350000Y-78800000D03* %TO.N,/MCU_Core/BTN_STICK*% X141300000Y-98800000D03* %TO.N,/Buttons_Direct/BTN_MACRO1*% @@ -312,7 +297,7 @@ X148544265Y-73955735D03* X125307179Y-152600000D03* X154400000Y-85000000D03* %TO.N,/MCU_Core/STAT1*% -X133250000Y-71850000D03* +X133350000Y-70000000D03* X128100000Y-103700000D03* X126624265Y-119724265D03* %TO.N,VBUS*% @@ -320,7 +305,7 @@ X135470098Y-154243783D03* X139556798Y-154232791D03* %TO.N,VSYS*% X142200000Y-119500000D03* -X124600000Y-88100000D03* +X124659759Y-89061229D03* X136200000Y-116100000D03* X143600000Y-124150000D03* X136275000Y-108200000D03* @@ -340,208 +325,137 @@ G01* X128988794Y-60322989D01* X129000000Y-60374500D01* X129000000Y-63110000D01* -X129982893Y-63110000D01* -X130049932Y-63129685D01* -X130095687Y-63182489D01* -X130105631Y-63251647D01* -X130085995Y-63302891D01* -X130040609Y-63370814D01* -X130040602Y-63370827D01* -X129980264Y-63516498D01* -X129980261Y-63516510D01* -X129949500Y-63671153D01* -X129949500Y-63828846D01* -X129980261Y-63983489D01* -X129980264Y-63983501D01* -X130040602Y-64129172D01* -X130040609Y-64129185D01* -X130128210Y-64260288D01* -X130128213Y-64260292D01* -X130239707Y-64371786D01* -X130239711Y-64371789D01* -X130370814Y-64459390D01* -X130370827Y-64459397D01* -X130416254Y-64478213D01* -X130516503Y-64519737D01* -X130671153Y-64550499D01* -X130671156Y-64550500D01* -X130671158Y-64550500D01* -X130828844Y-64550500D01* -X130828845Y-64550499D01* -X130983497Y-64519737D01* -X131129179Y-64459394D01* -X131260289Y-64371789D01* -X131371789Y-64260289D01* -X131459394Y-64129179D01* -X131519737Y-63983497D01* -X131550500Y-63828842D01* -X131550500Y-63671158D01* -X131550500Y-63671155D01* -X131550499Y-63671153D01* -X131540679Y-63621786D01* -X131519737Y-63516503D01* -X131517163Y-63510288D01* -X131459397Y-63370827D01* -X131459390Y-63370814D01* -X131414005Y-63302891D01* -X131393127Y-63236214D01* -X131411611Y-63168833D01* -X131463590Y-63122143D01* -X131517107Y-63110000D01* X147000000Y-63110000D01* -X147000000Y-62673992D01* -X149134500Y-62673992D01* -X149134500Y-63326007D01* -X149173907Y-63524119D01* -X149173909Y-63524127D01* -X149251212Y-63710752D01* -X149251217Y-63710762D01* -X149363441Y-63878718D01* -X149506281Y-64021558D01* -X149674237Y-64133782D01* -X149674241Y-64133784D01* -X149674244Y-64133786D01* -X149860873Y-64211091D01* -X150024288Y-64243596D01* -X150058992Y-64250499D01* -X150058996Y-64250500D01* -X150058997Y-64250500D01* -X150261004Y-64250500D01* -X150261005Y-64250499D01* -X150459127Y-64211091D01* -X150645756Y-64133786D01* -X150726110Y-64080094D01* -X150792786Y-64059217D01* -X150860166Y-64077701D01* -X150863865Y-64080078D01* -X150944244Y-64133786D01* -X151130873Y-64211091D01* -X151294288Y-64243596D01* -X151328992Y-64250499D01* -X151328996Y-64250500D01* -X151328997Y-64250500D01* -X151531004Y-64250500D01* -X151531005Y-64250499D01* -X151729127Y-64211091D01* -X151810338Y-64177451D01* -X151879804Y-64169983D01* -X151924859Y-64189594D01* -X151925128Y-64189103D01* -X151930613Y-64192098D01* -X151932099Y-64192745D01* -X151932911Y-64193353D01* -X151932913Y-64193354D01* -X152067620Y-64243596D01* -X152067627Y-64243598D01* -X152127155Y-64249999D01* -X152127172Y-64250000D01* -X152450000Y-64250000D01* -X152450000Y-63365865D01* -X152450067Y-63361789D01* -X152450400Y-63351638D01* -X152455500Y-63326003D01* -X152455500Y-63285830D01* -X152469745Y-63300075D01* -X152555255Y-63349444D01* -X152650630Y-63375000D01* -X152749370Y-63375000D01* -X152844745Y-63349444D01* -X152930255Y-63300075D01* -X152950000Y-63280330D01* -X152950000Y-64250000D01* -X153272828Y-64250000D01* -X153272844Y-64249999D01* -X153332372Y-64243598D01* -X153332379Y-64243596D01* -X153467086Y-64193354D01* -X153467093Y-64193350D01* -X153582187Y-64107190D01* -X153582190Y-64107187D01* -X153668350Y-63992093D01* -X153668354Y-63992086D01* -X153718596Y-63857379D01* -X153718598Y-63857372D01* -X153724999Y-63797844D01* -X153725000Y-63797827D01* -X153725000Y-63250000D01* -X152980330Y-63250000D01* -X153000075Y-63230255D01* -X153049444Y-63144745D01* -X153075000Y-63049370D01* -X153075000Y-62950630D01* -X153049444Y-62855255D01* -X153000075Y-62769745D01* -X152980330Y-62750000D01* -X153725000Y-62750000D01* -X153725000Y-62202172D01* -X153724999Y-62202155D01* -X153718598Y-62142627D01* -X153718596Y-62142620D01* -X153668354Y-62007913D01* -X153668350Y-62007906D01* -X153582190Y-61892812D01* -X153582187Y-61892809D01* -X153467093Y-61806649D01* -X153467086Y-61806645D01* -X153332379Y-61756403D01* -X153332372Y-61756401D01* -X153272844Y-61750000D01* -X152950000Y-61750000D01* -X152950000Y-62719670D01* -X152930255Y-62699925D01* -X152844745Y-62650556D01* -X152749370Y-62625000D01* -X152650630Y-62625000D01* -X152555255Y-62650556D01* -X152469745Y-62699925D01* -X152455500Y-62714170D01* -X152455500Y-62673997D01* -X152452383Y-62658326D01* -X152450000Y-62634134D01* -X152450000Y-61750000D01* -X152127155Y-61750000D01* -X152067627Y-61756401D01* -X152067620Y-61756403D01* -X151932913Y-61806645D01* -X151932911Y-61806646D01* -X151932092Y-61807260D01* -X151931134Y-61807616D01* -X151925132Y-61810895D01* -X151924660Y-61810031D01* -X151866625Y-61831671D01* -X151810338Y-61822547D01* -X151729131Y-61788910D01* -X151729119Y-61788907D01* -X151531007Y-61749500D01* -X151531003Y-61749500D01* -X151328997Y-61749500D01* -X151328992Y-61749500D01* -X151130880Y-61788907D01* -X151130872Y-61788909D01* -X150944244Y-61866213D01* -X150863891Y-61919904D01* -X150797213Y-61940782D01* -X150729833Y-61922297D01* -X150726109Y-61919904D01* -X150645755Y-61866213D01* -X150459127Y-61788909D01* -X150459119Y-61788907D01* -X150261007Y-61749500D01* -X150261003Y-61749500D01* -X150058997Y-61749500D01* -X150058992Y-61749500D01* -X149860880Y-61788907D01* -X149860872Y-61788909D01* -X149674247Y-61866212D01* -X149674237Y-61866217D01* -X149506281Y-61978441D01* -X149363441Y-62121281D01* -X149251217Y-62289237D01* -X149251212Y-62289247D01* -X149173909Y-62475872D01* -X149173907Y-62475880D01* -X149134500Y-62673992D01* -X147000000Y-62673992D01* +X147000000Y-61818995D01* +X148524499Y-61818995D01* +X148551418Y-61954322D01* +X148551421Y-61954332D01* +X148604221Y-62081804D01* +X148604228Y-62081817D01* +X148680885Y-62196541D01* +X148680888Y-62196545D01* +X148778454Y-62294111D01* +X148778458Y-62294114D01* +X148893182Y-62370771D01* +X148893195Y-62370778D01* +X149020667Y-62423578D01* +X149020672Y-62423580D01* +X149020676Y-62423580D01* +X149020677Y-62423581D01* +X149156004Y-62450500D01* +X149156007Y-62450500D01* +X149293995Y-62450500D01* +X149385041Y-62432389D01* +X149429328Y-62423580D01* +X149556811Y-62370775D01* +X149671542Y-62294114D01* +X149769114Y-62196542D01* +X149845775Y-62081811D01* +X149898580Y-61954328D01* +X149925500Y-61818995D01* +X152774499Y-61818995D01* +X152801418Y-61954322D01* +X152801421Y-61954332D01* +X152854221Y-62081804D01* +X152854228Y-62081817D01* +X152930885Y-62196541D01* +X152930888Y-62196545D01* +X153028454Y-62294111D01* +X153028458Y-62294114D01* +X153143182Y-62370771D01* +X153143195Y-62370778D01* +X153270667Y-62423578D01* +X153270672Y-62423580D01* +X153270676Y-62423580D01* +X153270677Y-62423581D01* +X153406004Y-62450500D01* +X153406007Y-62450500D01* +X153543995Y-62450500D01* +X153635041Y-62432389D01* +X153679328Y-62423580D01* +X153806811Y-62370775D01* +X153921542Y-62294114D01* +X154019114Y-62196542D01* +X154095775Y-62081811D01* +X154148580Y-61954328D01* +X154175500Y-61818993D01* +X154175500Y-61681007D01* +X154175500Y-61681004D01* +X154148581Y-61545677D01* +X154148580Y-61545676D01* +X154148580Y-61545672D01* +X154148578Y-61545667D01* +X154095778Y-61418195D01* +X154095771Y-61418182D01* +X154019114Y-61303458D01* +X154019111Y-61303454D01* +X153921545Y-61205888D01* +X153921541Y-61205885D01* +X153806817Y-61129228D01* +X153806804Y-61129221D01* +X153679332Y-61076421D01* +X153679322Y-61076418D01* +X153543995Y-61049500D01* +X153543993Y-61049500D01* +X153406007Y-61049500D01* +X153406005Y-61049500D01* +X153270677Y-61076418D01* +X153270667Y-61076421D01* +X153143195Y-61129221D01* +X153143182Y-61129228D01* +X153028458Y-61205885D01* +X153028454Y-61205888D01* +X152930888Y-61303454D01* +X152930885Y-61303458D01* +X152854228Y-61418182D01* +X152854221Y-61418195D01* +X152801421Y-61545667D01* +X152801418Y-61545677D01* +X152774500Y-61681004D01* +X152774500Y-61681007D01* +X152774500Y-61818993D01* +X152774500Y-61818995D01* +X152774499Y-61818995D01* +X149925500Y-61818995D01* +X149925500Y-61818993D01* +X149925500Y-61681007D01* +X149925500Y-61681004D01* +X149898581Y-61545677D01* +X149898580Y-61545676D01* +X149898580Y-61545672D01* +X149898578Y-61545667D01* +X149845778Y-61418195D01* +X149845771Y-61418182D01* +X149769114Y-61303458D01* +X149769111Y-61303454D01* +X149671545Y-61205888D01* +X149671541Y-61205885D01* +X149556817Y-61129228D01* +X149556804Y-61129221D01* +X149429332Y-61076421D01* +X149429322Y-61076418D01* +X149293995Y-61049500D01* +X149293993Y-61049500D01* +X149156007Y-61049500D01* +X149156005Y-61049500D01* +X149020677Y-61076418D01* +X149020667Y-61076421D01* +X148893195Y-61129221D01* +X148893182Y-61129228D01* +X148778458Y-61205885D01* +X148778454Y-61205888D01* +X148680888Y-61303454D01* +X148680885Y-61303458D01* +X148604228Y-61418182D01* +X148604221Y-61418195D01* +X148551421Y-61545667D01* +X148551418Y-61545677D01* +X148524500Y-61681004D01* +X148524500Y-61681007D01* +X148524500Y-61818993D01* +X148524500Y-61818995D01* +X148524499Y-61818995D01* +X147000000Y-61818995D01* X147000000Y-60374500D01* X147019685Y-60307461D01* X147072489Y-60261706D01* @@ -6007,7 +5921,7 @@ X145273967Y-91295271D01* X145295955Y-91249591D01* X145304442Y-91238532D01* X145420815Y-91036969D01* -X145425854Y-91024805D01* +X145426385Y-91023523D01* X145509879Y-90821947D01* X145509878Y-90821947D01* X145509882Y-90821940D01* @@ -6026,7 +5940,7 @@ X147989707Y-90924729D01* X147989711Y-90924732D01* X148120814Y-91012333D01* X148120827Y-91012340D01* -X148206031Y-91047632D01* +X148266498Y-91072678D01* X148266503Y-91072680D01* X148421153Y-91103442D01* X148421156Y-91103443D01* @@ -6034,15 +5948,12 @@ X148421158Y-91103443D01* X148578844Y-91103443D01* X148578845Y-91103442D01* X148733497Y-91072680D01* -X148849078Y-91024805D01* -X148879172Y-91012340D01* -X148879172Y-91012339D01* X148879179Y-91012337D01* X149010289Y-90924732D01* X149121789Y-90813232D01* X149209394Y-90682122D01* X149269737Y-90536440D01* -X149283006Y-90469735D01* +X149290037Y-90434388D01* X149292670Y-90421153D01* X149699500Y-90421153D01* X149699500Y-90578846D01* @@ -6073,7 +5984,7 @@ X151300500Y-90578842D01* X151300500Y-90421158D01* X151300500Y-90421155D01* X151300499Y-90421153D01* -X151292669Y-90381789D01* +X151297896Y-90408068D01* X151269737Y-90266503D01* X151252174Y-90224101D01* X151209397Y-90120827D01* @@ -6110,7 +6021,7 @@ X149300500Y-90224098D01* X149300499Y-90224096D01* X149282505Y-90133634D01* X149269737Y-90069446D01* -X149236710Y-89989711D01* +X149242192Y-90002946D01* X149209397Y-89923770D01* X149209390Y-89923757D01* X149121789Y-89792654D01* @@ -6142,12 +6053,12 @@ X145600500Y-90224096D01* X145600500Y-90133628D01* X145570121Y-89902874D01* X145509882Y-89678060D01* -X145509879Y-89678052D01* +X145506918Y-89670904D01* X145420819Y-89463039D01* X145420811Y-89463023D01* X145304446Y-89261475D01* X145304442Y-89261468D01* -X145163824Y-89078211D01* +X145211294Y-89140075D01* X145162757Y-89076820D01* X145162751Y-89076813D01* X144998186Y-88912248D01* @@ -6190,7 +6101,7 @@ X142049501Y-90133617D01* X142049500Y-90133634D01* X142049500Y-90366365D01* X142049501Y-90366382D01* -X142077471Y-90578842D01* +X142079214Y-90592081D01* X142079879Y-90597126D01* X142137785Y-90813235D01* X142140120Y-90821947D01* @@ -6826,64 +6737,75 @@ X121049500Y-92693993D01* X121049500Y-92693995D01* X121049499Y-92693995D01* X120250500Y-92693995D01* -X120250500Y-90259388D01* -X123287735Y-90259388D01* -X123287735Y-90417081D01* -X123318496Y-90571724D01* -X123318499Y-90571736D01* -X123378837Y-90717407D01* -X123378844Y-90717420D01* -X123466445Y-90848523D01* -X123466448Y-90848527D01* -X123577942Y-90960021D01* -X123577946Y-90960024D01* -X123709049Y-91047625D01* -X123709062Y-91047632D01* -X123843804Y-91103443D01* -X123854738Y-91107972D01* -X124009388Y-91138734D01* -X124009391Y-91138735D01* -X124009393Y-91138735D01* -X124167079Y-91138735D01* -X124167080Y-91138734D01* -X124321732Y-91107972D01* -X124467414Y-91047629D01* -X124467419Y-91047625D01* -X124467422Y-91047624D01* -X124501573Y-91024805D01* -X124568250Y-91003926D01* -X124635631Y-91022410D01* -X124658146Y-91040225D01* -X124739707Y-91121786D01* -X124739711Y-91121789D01* -X124870814Y-91209390D01* -X124870827Y-91209397D01* -X125016498Y-91269735D01* -X125016503Y-91269737D01* -X125171153Y-91300499D01* -X125171156Y-91300500D01* -X125171158Y-91300500D01* -X125328844Y-91300500D01* -X125328845Y-91300499D01* -X125483497Y-91269737D01* -X125629179Y-91209394D01* -X125760289Y-91121789D01* -X125871789Y-91010289D01* -X125959394Y-90879179D01* -X126019737Y-90733497D01* -X126050500Y-90578842D01* -X126050500Y-90421158D01* -X126050500Y-90421155D01* -X126050499Y-90421153D01* -X126042669Y-90381789D01* -X126019737Y-90266503D01* -X126002174Y-90224101D01* -X125982673Y-90177021D01* -X125964702Y-90133634D01* +X120250500Y-90434388D01* +X123287735Y-90434388D01* +X123287735Y-90592081D01* +X123318496Y-90746724D01* +X123318499Y-90746736D01* +X123378837Y-90892407D01* +X123378844Y-90892420D01* +X123466445Y-91023523D01* +X123466448Y-91023527D01* +X123577942Y-91135021D01* +X123577946Y-91135024D01* +X123709049Y-91222625D01* +X123709062Y-91222632D01* +X123822788Y-91269738D01* +X123854738Y-91282972D01* +X123942852Y-91300499D01* +X124009388Y-91313734D01* +X124009391Y-91313735D01* +X124009393Y-91313735D01* +X124167079Y-91313735D01* +X124167080Y-91313734D01* +X124321732Y-91282972D01* +X124467414Y-91222629D01* +X124598524Y-91135024D01* +X124710024Y-91023524D01* +X124797629Y-90892414D01* +X124857972Y-90746732D01* +X124873816Y-90667075D01* +X124906200Y-90605167D01* +X124966916Y-90570593D01* +X125036685Y-90574332D01* +X125093357Y-90615198D01* +X125117050Y-90667076D01* +X125130261Y-90733492D01* +X125130264Y-90733501D01* +X125190602Y-90879172D01* +X125190609Y-90879185D01* +X125278210Y-91010288D01* +X125278213Y-91010292D01* +X125389707Y-91121786D01* +X125389711Y-91121789D01* +X125520814Y-91209390D01* +X125520827Y-91209397D01* +X125666498Y-91269735D01* +X125666503Y-91269737D01* +X125821153Y-91300499D01* +X125821156Y-91300500D01* +X125821158Y-91300500D01* +X125978844Y-91300500D01* +X125978845Y-91300499D01* +X126133497Y-91269737D01* +X126279179Y-91209394D01* +X126410289Y-91121789D01* +X126521789Y-91010289D01* +X126609394Y-90879179D01* +X126669737Y-90733497D01* +X126700500Y-90578842D01* +X126700500Y-90421158D01* +X126700500Y-90421155D01* +X126700499Y-90421153D01* +X126697896Y-90408068D01* +X126669737Y-90266503D01* +X126652174Y-90224101D01* +X126632673Y-90177021D01* +X126614702Y-90133634D01* X129399500Y-90133634D01* X129399500Y-90366365D01* X129399501Y-90366382D01* -X129427471Y-90578842D01* +X129429214Y-90592081D01* X129429879Y-90597126D01* X129487785Y-90813235D01* X129490120Y-90821947D01* @@ -6918,7 +6840,7 @@ X132348181Y-91587756D01* X132512756Y-91423181D01* X132654442Y-91238532D01* X132770815Y-91036969D01* -X132775854Y-91024805D01* +X132776385Y-91023523D01* X132859879Y-90821947D01* X132859878Y-90821947D01* X132859882Y-90821940D01* @@ -6927,11 +6849,10 @@ X132950500Y-90366372D01* X132950500Y-90133628D01* X132920121Y-89902874D01* X132859882Y-89678060D01* -X132859879Y-89678052D01* +X132856918Y-89670904D01* X132770819Y-89463039D01* X132770814Y-89463030D01* -X132721183Y-89377067D01* -X132721182Y-89377065D01* +X132757757Y-89440414D01* X132688901Y-89321153D01* X135499500Y-89321153D01* X135499500Y-89478846D01* @@ -6974,7 +6895,7 @@ X139889707Y-90321786D01* X139889711Y-90321789D01* X140020814Y-90409390D01* X140020827Y-90409397D01* -X140166498Y-90469735D01* +X140101089Y-90442642D01* X140166503Y-90469737D01* X140321153Y-90500499D01* X140321156Y-90500500D01* @@ -6982,9 +6903,6 @@ X140321158Y-90500500D01* X140478844Y-90500500D01* X140478845Y-90500499D01* X140633497Y-90469737D01* -X140760621Y-90417081D01* -X140779172Y-90409397D01* -X140779172Y-90409396D01* X140779179Y-90409394D01* X140910289Y-90321789D01* X141021789Y-90210289D01* @@ -6994,7 +6912,7 @@ X141200500Y-89778842D01* X141200500Y-89621158D01* X141200500Y-89621155D01* X141200499Y-89621153D01* -X141172192Y-89478846D01* +X141194476Y-89590873D01* X141169737Y-89466503D01* X141168299Y-89463031D01* X141109397Y-89320827D01* @@ -7034,7 +6952,7 @@ X137100500Y-89321155D01* X137100499Y-89321153D01* X137074353Y-89189711D01* X137069737Y-89166503D01* -X137069735Y-89166498D01* +X137058790Y-89140075D01* X137009397Y-89020827D01* X137009390Y-89020814D01* X136921789Y-88889711D01* @@ -7063,9 +6981,8 @@ X135530264Y-89166498D01* X135530261Y-89166510D01* X135499500Y-89321153D01* X132688901Y-89321153D01* -X132688709Y-89320821D01* X132654442Y-89261468D01* -X132513824Y-89078211D01* +X132561294Y-89140075D01* X132512757Y-89076820D01* X132512751Y-89076813D01* X132348186Y-88912248D01* @@ -7106,53 +7023,212 @@ X129490120Y-89678052D01* X129429878Y-89902877D01* X129399501Y-90133617D01* X129399500Y-90133634D01* -X125964702Y-90133634D01* -X125959397Y-90120827D01* -X125959390Y-90120814D01* -X125871789Y-89989711D01* -X125871786Y-89989707D01* -X125760292Y-89878213D01* -X125760288Y-89878210D01* -X125629185Y-89790609D01* -X125629172Y-89790602D01* -X125483501Y-89730264D01* -X125483489Y-89730261D01* -X125328845Y-89699500D01* -X125328842Y-89699500D01* -X125171158Y-89699500D01* -X125171155Y-89699500D01* -X125016510Y-89730261D01* -X125016498Y-89730264D01* -X124870828Y-89790602D01* -X124870814Y-89790610D01* -X124836657Y-89813432D01* -X124769979Y-89834308D01* -X124702599Y-89815822D01* -X124680088Y-89798009D01* -X124598527Y-89716448D01* -X124598523Y-89716445D01* -X124467420Y-89628844D01* -X124467407Y-89628837D01* -X124321736Y-89568499D01* -X124321724Y-89568496D01* -X124167080Y-89537735D01* -X124167077Y-89537735D01* -X124009393Y-89537735D01* -X124009390Y-89537735D01* -X123854745Y-89568496D01* -X123854733Y-89568499D01* -X123709062Y-89628837D01* -X123709049Y-89628844D01* -X123577946Y-89716445D01* -X123577942Y-89716448D01* -X123466448Y-89827942D01* -X123466445Y-89827946D01* -X123378844Y-89959049D01* -X123378837Y-89959062D01* -X123318499Y-90104733D01* -X123318496Y-90104745D01* -X123287735Y-90259388D01* -X120250500Y-90259388D01* +X126614702Y-90133634D01* +X126609397Y-90120827D01* +X126609390Y-90120814D01* +X126521789Y-89989711D01* +X126521786Y-89989707D01* +X126410292Y-89878213D01* +X126410288Y-89878210D01* +X126279185Y-89790609D01* +X126279172Y-89790602D01* +X126133501Y-89730264D01* +X126133489Y-89730261D01* +X125978845Y-89699500D01* +X125978842Y-89699500D01* +X125821158Y-89699500D01* +X125821155Y-89699500D01* +X125666510Y-89730261D01* +X125666498Y-89730264D01* +X125520827Y-89790602D01* +X125520814Y-89790609D01* +X125389711Y-89878210D01* +X125389707Y-89878213D01* +X125278213Y-89989707D01* +X125278210Y-89989711D01* +X125190609Y-90120814D01* +X125190602Y-90120827D01* +X125130264Y-90266498D01* +X125130261Y-90266508D01* +X125114418Y-90346157D01* +X125082033Y-90408068D01* +X125021317Y-90442642D01* +X124951547Y-90438901D01* +X124894876Y-90398035D01* +X124871184Y-90346156D01* +X124857973Y-90279745D01* +X124857972Y-90279738D01* +X124834927Y-90224101D01* +X124797632Y-90134062D01* +X124797625Y-90134049D01* +X124733191Y-90037617D01* +X124712313Y-89970939D01* +X124730798Y-89903559D01* +X124782776Y-89856869D01* +X124812102Y-89847109D01* +X124842633Y-89841035D01* +X124893256Y-89830966D01* +X125019091Y-89778844D01* +X125038931Y-89770626D01* +X125038931Y-89770625D01* +X125038938Y-89770623D01* +X125170048Y-89683018D01* +X125281548Y-89571518D01* +X125369153Y-89440408D01* +X125429496Y-89294726D01* +X125460259Y-89140071D01* +X125460259Y-88982387D01* +X125460259Y-88982384D01* +X125460258Y-88982382D01* +X125447673Y-88919114D01* +X125429496Y-88827732D01* +X125408984Y-88778211D01* +X125369156Y-88682056D01* +X125369149Y-88682043D01* +X125281548Y-88550940D01* +X125281545Y-88550936D01* +X125168096Y-88437487D01* +X125134611Y-88376164D01* +X125139595Y-88306472D01* +X125141216Y-88302354D01* +X125169735Y-88233501D01* +X125169737Y-88233497D01* +X125200500Y-88078842D01* +X125200500Y-87921158D01* +X125200500Y-87921155D01* +X125200499Y-87921153D01* +X125182544Y-87830888D01* +X125169737Y-87766503D01* +X125156976Y-87735694D01* +X125109397Y-87620827D01* +X125109390Y-87620814D01* +X125021789Y-87489711D01* +X125021786Y-87489707D01* +X124910289Y-87378210D01* +X124895259Y-87368168D01* +X124779185Y-87290609D01* +X124779172Y-87290602D01* +X124732217Y-87271153D01* +X130299500Y-87271153D01* +X130299500Y-87428846D01* +X130330261Y-87583489D01* +X130330264Y-87583501D01* +X130390602Y-87729172D01* +X130390609Y-87729185D01* +X130478210Y-87860288D01* +X130478213Y-87860292D01* +X130589707Y-87971786D01* +X130589711Y-87971789D01* +X130720814Y-88059390D01* +X130720827Y-88059397D01* +X130866498Y-88119735D01* +X130866503Y-88119737D01* +X131021153Y-88150499D01* +X131021156Y-88150500D01* +X131021158Y-88150500D01* +X131178844Y-88150500D01* +X131178845Y-88150499D01* +X131333497Y-88119737D01* +X131479179Y-88059394D01* +X131610289Y-87971789D01* +X131721789Y-87860289D01* +X131809394Y-87729179D01* +X131828279Y-87683586D01* +X131835628Y-87665845D01* +X131869735Y-87583501D01* +X131869737Y-87583497D01* +X131900500Y-87428842D01* +X131900500Y-87271158D01* +X131900500Y-87271155D01* +X131900499Y-87271153D01* +X131900217Y-87269735D01* +X131869737Y-87116503D01* +X131865216Y-87105589D01* +X131809397Y-86970827D01* +X131809390Y-86970814D01* +X131721789Y-86839711D01* +X131721786Y-86839707D01* +X131610292Y-86728213D01* +X131610288Y-86728210D01* +X131479185Y-86640609D01* +X131479172Y-86640602D01* +X131333501Y-86580264D01* +X131333489Y-86580261D01* +X131178845Y-86549500D01* +X131178842Y-86549500D01* +X131021158Y-86549500D01* +X131021155Y-86549500D01* +X130866510Y-86580261D01* +X130866498Y-86580264D01* +X130720827Y-86640602D01* +X130720814Y-86640609D01* +X130589711Y-86728210D01* +X130589707Y-86728213D01* +X130478213Y-86839707D01* +X130478210Y-86839711D01* +X130390609Y-86970814D01* +X130390602Y-86970827D01* +X130330264Y-87116498D01* +X130330261Y-87116510D01* +X130299500Y-87271153D01* +X124732217Y-87271153D01* +X124633501Y-87230264D01* +X124633489Y-87230261D01* +X124478845Y-87199500D01* +X124478842Y-87199500D01* +X124321158Y-87199500D01* +X124321155Y-87199500D01* +X124166510Y-87230261D01* +X124166498Y-87230264D01* +X124020827Y-87290602D01* +X124020814Y-87290609D01* +X123889711Y-87378210D01* +X123889707Y-87378213D01* +X123778213Y-87489707D01* +X123778210Y-87489711D01* +X123690609Y-87620814D01* +X123690602Y-87620827D01* +X123630264Y-87766498D01* +X123630261Y-87766510D01* +X123599500Y-87921153D01* +X123599500Y-88078846D01* +X123630261Y-88233489D01* +X123630264Y-88233501D01* +X123690602Y-88379172D01* +X123690609Y-88379185D01* +X123778210Y-88510288D01* +X123778213Y-88510292D01* +X123891662Y-88623741D01* +X123925147Y-88685064D01* +X123920163Y-88754756D01* +X123918543Y-88758873D01* +X123890022Y-88827731D01* +X123890020Y-88827739D01* +X123859259Y-88982382D01* +X123859259Y-89140075D01* +X123890020Y-89294718D01* +X123890023Y-89294730D01* +X123950361Y-89440401D01* +X123950368Y-89440414D01* +X124014802Y-89536846D01* +X124035680Y-89603524D01* +X124017195Y-89670904D01* +X123965216Y-89717594D01* +X123935893Y-89727354D01* +X123854742Y-89743496D01* +X123854733Y-89743499D01* +X123709062Y-89803837D01* +X123709049Y-89803844D01* +X123577946Y-89891445D01* +X123577942Y-89891448D01* +X123466448Y-90002942D01* +X123466445Y-90002946D01* +X123378844Y-90134049D01* +X123378837Y-90134062D01* +X123318499Y-90279733D01* +X123318496Y-90279745D01* +X123287735Y-90434388D01* +X120250500Y-90434388D01* X120250500Y-88443995D01* X121049499Y-88443995D01* X121076418Y-88579322D01* @@ -7179,81 +7255,15 @@ X122196542Y-88919114D01* X122294114Y-88821542D01* X122370775Y-88706811D01* X122423580Y-88579328D01* -X122443501Y-88479179D01* -X122450500Y-88443995D01* +X122450500Y-88443993D01* +X122450500Y-88306007D01* X122450500Y-88306004D01* X122423581Y-88170677D01* X122423580Y-88170676D01* X122423580Y-88170672D01* X122402482Y-88119737D01* -X122378782Y-88062518D01* -X122370776Y-88043192D01* -X122370775Y-88043189D01* -X122370773Y-88043186D01* +X122370778Y-88043195D01* X122370771Y-88043182D01* -X122356052Y-88021153D01* -X123799500Y-88021153D01* -X123799500Y-88178846D01* -X123830261Y-88333489D01* -X123830264Y-88333501D01* -X123890602Y-88479172D01* -X123890609Y-88479185D01* -X123978210Y-88610288D01* -X123978213Y-88610292D01* -X124089707Y-88721786D01* -X124089711Y-88721789D01* -X124220814Y-88809390D01* -X124220827Y-88809397D01* -X124366498Y-88869735D01* -X124366503Y-88869737D01* -X124516131Y-88899500D01* -X124521153Y-88900499D01* -X124521156Y-88900500D01* -X124521158Y-88900500D01* -X124678844Y-88900500D01* -X124678845Y-88900499D01* -X124833497Y-88869737D01* -X124979179Y-88809394D01* -X125110289Y-88721789D01* -X125221789Y-88610289D01* -X125309394Y-88479179D01* -X125369737Y-88333497D01* -X125400500Y-88178842D01* -X125400500Y-88021158D01* -X125400500Y-88021155D01* -X125400499Y-88021153D01* -X125390679Y-87971786D01* -X125369737Y-87866503D01* -X125352431Y-87824723D01* -X125309397Y-87720827D01* -X125309390Y-87720814D01* -X125221789Y-87589711D01* -X125221786Y-87589707D01* -X125110292Y-87478213D01* -X125110288Y-87478210D01* -X124979185Y-87390609D01* -X124979173Y-87390602D01* -X124952674Y-87379627D01* -X124833501Y-87330264D01* -X124833489Y-87330261D01* -X124678845Y-87299500D01* -X124678842Y-87299500D01* -X124521158Y-87299500D01* -X124521155Y-87299500D01* -X124366510Y-87330261D01* -X124366498Y-87330264D01* -X124220827Y-87390602D01* -X124220814Y-87390609D01* -X124089711Y-87478210D01* -X124089707Y-87478213D01* -X123978213Y-87589707D01* -X123978210Y-87589711D01* -X123890609Y-87720814D01* -X123890602Y-87720827D01* -X123830264Y-87866498D01* -X123830261Y-87866510D01* -X123799500Y-88021153D01* -X122356052Y-88021153D01* X122294114Y-87928458D01* X122294111Y-87928454D01* X122196545Y-87830888D01* @@ -7284,70 +7294,6 @@ X121049500Y-88443993D01* X121049500Y-88443995D01* X121049499Y-88443995D01* X120250500Y-88443995D01* -X120250500Y-87271153D01* -X130299500Y-87271153D01* -X130299500Y-87428846D01* -X130330261Y-87583489D01* -X130330264Y-87583501D01* -X130390602Y-87729172D01* -X130390609Y-87729185D01* -X130478210Y-87860288D01* -X130478213Y-87860292D01* -X130589707Y-87971786D01* -X130589711Y-87971789D01* -X130720814Y-88059390D01* -X130720827Y-88059397D01* -X130866498Y-88119735D01* -X130866503Y-88119737D01* -X131021153Y-88150499D01* -X131021156Y-88150500D01* -X131021158Y-88150500D01* -X131178844Y-88150500D01* -X131178845Y-88150499D01* -X131333497Y-88119737D01* -X131479179Y-88059394D01* -X131610289Y-87971789D01* -X131721789Y-87860289D01* -X131809394Y-87729179D01* -X131809397Y-87729172D01* -X131835628Y-87665845D01* -X131867163Y-87589711D01* -X131869737Y-87583497D01* -X131900500Y-87428842D01* -X131900500Y-87271158D01* -X131900500Y-87271155D01* -X131900499Y-87271153D01* -X131900217Y-87269735D01* -X131869737Y-87116503D01* -X131865216Y-87105589D01* -X131809397Y-86970827D01* -X131809390Y-86970814D01* -X131721789Y-86839711D01* -X131721786Y-86839707D01* -X131610292Y-86728213D01* -X131610288Y-86728210D01* -X131479185Y-86640609D01* -X131479172Y-86640602D01* -X131333501Y-86580264D01* -X131333489Y-86580261D01* -X131178845Y-86549500D01* -X131178842Y-86549500D01* -X131021158Y-86549500D01* -X131021155Y-86549500D01* -X130866510Y-86580261D01* -X130866498Y-86580264D01* -X130720827Y-86640602D01* -X130720814Y-86640609D01* -X130589711Y-86728210D01* -X130589707Y-86728213D01* -X130478213Y-86839707D01* -X130478210Y-86839711D01* -X130390609Y-86970814D01* -X130390602Y-86970827D01* -X130330264Y-87116498D01* -X130330261Y-87116510D01* -X130299500Y-87271153D01* -X120250500Y-87271153D01* X120250500Y-86399974D01* X133475000Y-86399974D01* X133475000Y-86640025D01* @@ -7385,7 +7331,7 @@ X136298654Y-87461824D01* X136336414Y-87513796D01* X136506204Y-87683586D01* X136700464Y-87824724D01* -X136782473Y-87866510D01* +X136770262Y-87860288D01* X136914406Y-87933734D01* X136914408Y-87933734D01* X136914411Y-87933736D01* @@ -7453,8 +7399,8 @@ X153646542Y-88919114D01* X153744114Y-88821542D01* X153820775Y-88706811D01* X153873580Y-88579328D01* -X153893501Y-88479179D01* -X153900500Y-88443995D01* +X153900500Y-88443993D01* +X153900500Y-88306007D01* X153900500Y-88306004D01* X153873581Y-88170677D01* X153873580Y-88170676D01* @@ -7525,9 +7471,6 @@ X143921158Y-87800500D01* X144078844Y-87800500D01* X144078845Y-87800499D01* X144233497Y-87769737D01* -X144351592Y-87720821D01* -X144379172Y-87709397D01* -X144379172Y-87709396D01* X144379179Y-87709394D01* X144510289Y-87621789D01* X144621789Y-87510289D01* @@ -7559,7 +7502,6 @@ X147120814Y-87209390D01* X147120827Y-87209397D01* X147266498Y-87269735D01* X147266503Y-87269737D01* -X147416131Y-87299500D01* X147421153Y-87300499D01* X147421156Y-87300500D01* X147421158Y-87300500D01* @@ -7740,7 +7682,7 @@ X148699500Y-85421153D01* X141058535Y-85421153D01* X140993796Y-85356414D01* X140799536Y-85215276D01* -X140728704Y-85179185D01* +X140787984Y-85209390D01* X140585593Y-85106265D01* X140357222Y-85032063D01* X140120059Y-84994500D01* @@ -7757,7 +7699,7 @@ X138662319Y-85524937D01* X138493798Y-85356416D01* X138493796Y-85356414D01* X138299536Y-85215276D01* -X138228704Y-85179185D01* +X138287984Y-85209390D01* X138085593Y-85106265D01* X137857222Y-85032063D01* X137620059Y-84994500D01* @@ -7800,46 +7742,31 @@ X133586728Y-85934598D01* X133512549Y-86162894D01* X133475000Y-86399974D01* X120250500Y-86399974D01* -X120250500Y-84721153D01* -X123599500Y-84721153D01* -X123599500Y-84878846D01* -X123630261Y-85033489D01* -X123630264Y-85033501D01* -X123690602Y-85179172D01* -X123690609Y-85179185D01* -X123778210Y-85310288D01* -X123778213Y-85310292D01* -X123889707Y-85421786D01* -X123889711Y-85421789D01* -X124020814Y-85509390D01* -X124020827Y-85509397D01* -X124127153Y-85553438D01* -X124166503Y-85569737D01* -X124279125Y-85592139D01* -X124321153Y-85600499D01* -X124321156Y-85600500D01* -X124321158Y-85600500D01* -X124478844Y-85600500D01* -X124478845Y-85600499D01* -X124633497Y-85569737D01* -X124779179Y-85509394D01* -X124910289Y-85421789D01* -X125021789Y-85310289D01* -X125042401Y-85279441D01* -X125056855Y-85257810D01* -X125109390Y-85179185D01* -X125109390Y-85179184D01* -X125109394Y-85179179D01* -X125169737Y-85033497D01* -X125200500Y-84878842D01* -X125200500Y-84721158D01* -X125200500Y-84721155D01* -X125200499Y-84721153D01* -X125180543Y-84620827D01* -X125169737Y-84566503D01* -X125137929Y-84489711D01* -X125126666Y-84462518D01* -X125109532Y-84421153D01* +X120250500Y-83921153D01* +X125958449Y-83921153D01* +X125958449Y-84078846D01* +X125989210Y-84233489D01* +X125989213Y-84233501D01* +X126049551Y-84379172D01* +X126049558Y-84379185D01* +X126137159Y-84510288D01* +X126137162Y-84510292D01* +X126248656Y-84621786D01* +X126248660Y-84621789D01* +X126379763Y-84709390D01* +X126379776Y-84709397D01* +X126517632Y-84766498D01* +X126525452Y-84769737D01* +X126680102Y-84800499D01* +X126680105Y-84800500D01* +X126680107Y-84800500D01* +X126837793Y-84800500D01* +X126837794Y-84800499D01* +X126992446Y-84769737D01* +X127138128Y-84709394D01* +X127269238Y-84621789D01* +X127380738Y-84510289D01* +X127440297Y-84421153D01* X141199500Y-84421153D01* X141199500Y-84578846D01* X141230261Y-84733489D01* @@ -7852,7 +7779,7 @@ X141489707Y-85121786D01* X141489711Y-85121789D01* X141620814Y-85209390D01* X141620827Y-85209397D01* -X141737708Y-85257810D01* +X141758683Y-85266498D01* X141766503Y-85269737D01* X141921153Y-85300499D01* X141921156Y-85300500D01* @@ -7878,7 +7805,7 @@ X142989707Y-85121786D01* X142989711Y-85121789D01* X143120814Y-85209390D01* X143120827Y-85209397D01* -X143237708Y-85257810D01* +X143258683Y-85266498D01* X143266503Y-85269737D01* X143421153Y-85300499D01* X143421156Y-85300500D01* @@ -7904,7 +7831,7 @@ X144300500Y-84421155D01* X144300499Y-84421153D01* X144274531Y-84290606D01* X144269737Y-84266503D01* -X144269735Y-84266498D01* +X144256062Y-84233489D01* X144209397Y-84120827D01* X144209390Y-84120814D01* X144121789Y-83989711D01* @@ -7955,79 +7882,69 @@ X141290602Y-84120827D01* X141230264Y-84266498D01* X141230261Y-84266510D01* X141199500Y-84421153D01* -X125109532Y-84421153D01* -X125109395Y-84420823D01* -X125109390Y-84420814D01* -X125021789Y-84289711D01* -X125021786Y-84289707D01* -X124910292Y-84178213D01* -X124910288Y-84178210D01* -X124779185Y-84090609D01* -X124779172Y-84090602D01* -X124633501Y-84030264D01* -X124633489Y-84030261D01* -X124478845Y-83999500D01* -X124478842Y-83999500D01* -X124321158Y-83999500D01* -X124321155Y-83999500D01* -X124166510Y-84030261D01* -X124166498Y-84030264D01* -X124020827Y-84090602D01* -X124020814Y-84090609D01* -X123889711Y-84178210D01* -X123889707Y-84178213D01* -X123778213Y-84289707D01* -X123778210Y-84289711D01* -X123690609Y-84420814D01* -X123690602Y-84420827D01* -X123630264Y-84566498D01* -X123630261Y-84566510D01* -X123599500Y-84721153D01* -X120250500Y-84721153D01* -X120250500Y-81274038D01* -X121799500Y-81274038D01* -X121799500Y-81525962D01* -X121838110Y-81769735D01* -X121838910Y-81774785D01* -X121916760Y-82014383D01* -X122031132Y-82238848D01* -X122179201Y-82442649D01* -X122179205Y-82442654D01* -X122357345Y-82620794D01* -X122357350Y-82620798D01* -X122535117Y-82749952D01* -X122561155Y-82768870D01* -X122704184Y-82841747D01* -X122785616Y-82883239D01* -X122785618Y-82883239D01* -X122785621Y-82883241D01* -X123025215Y-82961090D01* -X123274038Y-83000500D01* -X123274039Y-83000500D01* -X123525961Y-83000500D01* -X123525962Y-83000500D01* -X123774785Y-82961090D01* -X124014379Y-82883241D01* -X124238845Y-82768870D01* -X124442656Y-82620793D01* -X124620793Y-82442656D01* -X124768870Y-82238845D01* -X124883241Y-82014379D01* -X124961090Y-81774785D01* -X125000500Y-81525962D01* -X125000500Y-81274038D01* -X124961090Y-81025215D01* -X124883241Y-80785621D01* -X124883239Y-80785618D01* -X124883239Y-80785616D01* -X124826439Y-80674141D01* -X124768870Y-80561155D01* -X124684192Y-80444605D01* -X124643033Y-80387954D01* -X124643030Y-80387951D01* -X124635955Y-80378213D01* -X124620793Y-80357344D01* -X124584602Y-80321153D01* +X127440297Y-84421153D01* +X127468343Y-84379179D01* +X127528686Y-84233497D01* +X127559449Y-84078842D01* +X127559449Y-83921158D01* +X127559449Y-83921155D01* +X127559448Y-83921153D01* +X127533480Y-83790606D01* +X127528686Y-83766503D01* +X127528684Y-83766498D01* +X127468346Y-83620827D01* +X127468339Y-83620814D01* +X127380738Y-83489711D01* +X127380735Y-83489707D01* +X127269241Y-83378213D01* +X127269237Y-83378210D01* +X127138134Y-83290609D01* +X127138121Y-83290602D01* +X126992450Y-83230264D01* +X126992438Y-83230261D01* +X126837794Y-83199500D01* +X126837791Y-83199500D01* +X126680107Y-83199500D01* +X126680104Y-83199500D01* +X126525459Y-83230261D01* +X126525447Y-83230264D01* +X126379776Y-83290602D01* +X126379763Y-83290609D01* +X126248660Y-83378210D01* +X126248656Y-83378213D01* +X126137162Y-83489707D01* +X126137159Y-83489711D01* +X126049558Y-83620814D01* +X126049551Y-83620827D01* +X125989213Y-83766498D01* +X125989210Y-83766510D01* +X125958449Y-83921153D01* +X120250500Y-83921153D01* +X120250500Y-78721153D01* +X132549500Y-78721153D01* +X132549500Y-78878846D01* +X132580261Y-79033489D01* +X132580264Y-79033501D01* +X132640602Y-79179172D01* +X132640609Y-79179185D01* +X132728210Y-79310288D01* +X132728213Y-79310292D01* +X132839707Y-79421786D01* +X132839711Y-79421789D01* +X132975886Y-79512779D01* +X132974515Y-79514830D01* +X133016636Y-79556170D01* +X133032125Y-79624301D01* +X133008321Y-79689991D01* +X132977256Y-79719713D01* +X132889713Y-79778208D01* +X132889707Y-79778213D01* +X132778213Y-79889707D01* +X132778210Y-79889711D01* +X132690609Y-80020814D01* +X132690602Y-80020827D01* +X132630264Y-80166498D01* +X132630261Y-80166510D01* X132599500Y-80321153D01* X132599500Y-80478846D01* X132630261Y-80633489D01* @@ -8124,7 +8041,7 @@ X138010289Y-81621789D01* X138121789Y-81510289D01* X138209394Y-81379179D01* X138211220Y-81374772D01* -X138252944Y-81274038D01* +X138241984Y-81300499D01* X138269737Y-81233497D01* X138300500Y-81078842D01* X138300500Y-80921158D01* @@ -8282,99 +8199,90 @@ X134021789Y-79889711D01* X134021786Y-79889707D01* X133910292Y-79778213D01* X133910288Y-79778210D01* -X133779185Y-79690609D01* -X133779172Y-79690602D01* -X133633501Y-79630264D01* -X133633489Y-79630261D01* -X133478845Y-79599500D01* -X133478842Y-79599500D01* -X133321158Y-79599500D01* -X133321155Y-79599500D01* -X133166510Y-79630261D01* -X133166498Y-79630264D01* -X133020827Y-79690602D01* -X133020814Y-79690609D01* -X132889711Y-79778210D01* -X132889707Y-79778213D01* -X132778213Y-79889707D01* -X132778210Y-79889711D01* -X132690609Y-80020814D01* -X132690602Y-80020827D01* -X132630264Y-80166498D01* -X132630261Y-80166510D01* -X132599500Y-80321153D01* -X124584602Y-80321153D01* -X124442656Y-80179207D01* -X124442654Y-80179205D01* -X124442649Y-80179201D01* -X124238848Y-80031132D01* -X124238847Y-80031131D01* -X124238845Y-80031130D01* -X124157548Y-79989707D01* -X124014383Y-79916760D01* -X123774785Y-79838910D01* -X123525962Y-79799500D01* -X123274038Y-79799500D01* -X123149626Y-79819205D01* -X123025214Y-79838910D01* -X122785616Y-79916760D01* -X122561151Y-80031132D01* -X122357350Y-80179201D01* -X122357345Y-80179205D01* -X122179205Y-80357345D01* -X122179201Y-80357350D01* -X122031132Y-80561151D01* -X121916760Y-80785616D01* -X121838910Y-81025214D01* -X121811147Y-81200500D01* -X121799500Y-81274038D01* -X120250500Y-81274038D01* -X120250500Y-74921153D01* -X126399500Y-74921153D01* -X126399500Y-75078846D01* -X126430261Y-75233489D01* -X126430264Y-75233501D01* -X126490602Y-75379172D01* -X126490609Y-75379185D01* -X126578210Y-75510288D01* -X126578213Y-75510292D01* -X126689707Y-75621786D01* -X126689711Y-75621789D01* -X126820814Y-75709390D01* -X126820827Y-75709397D01* -X126966498Y-75769735D01* -X126966503Y-75769737D01* -X127121153Y-75800499D01* -X127121156Y-75800500D01* -X127121158Y-75800500D01* -X127175162Y-75800500D01* -X127242201Y-75820185D01* -X127287956Y-75872989D01* -X127289715Y-75877029D01* -X127290606Y-75879179D01* -X127290607Y-75879180D01* -X127290609Y-75879185D01* -X127325304Y-75931109D01* -X127346182Y-75997786D01* -X127327698Y-76065167D01* -X127325304Y-76068891D01* -X127290609Y-76120814D01* -X127290602Y-76120827D01* -X127230264Y-76266498D01* -X127230261Y-76266510D01* -X127199500Y-76421153D01* -X127199500Y-76578846D01* -X127230261Y-76733489D01* -X127230264Y-76733501D01* -X127290602Y-76879172D01* -X127290609Y-76879185D01* -X127378210Y-77010288D01* -X127378213Y-77010292D01* -X127489707Y-77121786D01* -X127489711Y-77121789D01* -X127620814Y-77209390D01* +X133774114Y-79687221D01* +X133775480Y-79685175D01* +X133733347Y-79643800D01* +X133717876Y-79575665D01* +X133741697Y-79509981D01* +X133772744Y-79480285D01* +X133795535Y-79465055D01* +X133860289Y-79421789D01* +X133971789Y-79310289D01* +X134059394Y-79179179D01* +X134065558Y-79164299D01* +X134075394Y-79140551D01* +X134119737Y-79033497D01* +X134150500Y-78878842D01* +X134150500Y-78721158D01* +X134150500Y-78721155D01* +X134150499Y-78721153D01* +X134129267Y-78614414D01* +X134119737Y-78566503D01* +X134088848Y-78491929D01* +X134059397Y-78420827D01* +X134059390Y-78420814D01* +X133971789Y-78289711D01* +X133971786Y-78289707D01* +X133860292Y-78178213D01* +X133860288Y-78178210D01* +X133729185Y-78090609D01* +X133729172Y-78090602D01* +X133583501Y-78030264D01* +X133583489Y-78030261D01* +X133428845Y-77999500D01* +X133428842Y-77999500D01* +X133271158Y-77999500D01* +X133271155Y-77999500D01* +X133116510Y-78030261D01* +X133116498Y-78030264D01* +X132970827Y-78090602D01* +X132970814Y-78090609D01* +X132839711Y-78178210D01* +X132839707Y-78178213D01* +X132728213Y-78289707D01* +X132728210Y-78289711D01* +X132640609Y-78420814D01* +X132640602Y-78420827D01* +X132580264Y-78566498D01* +X132580261Y-78566510D01* +X132549500Y-78721153D01* +X120250500Y-78721153D01* +X120250500Y-76821153D01* +X125899500Y-76821153D01* +X125899500Y-76978846D01* +X125930261Y-77133489D01* +X125930264Y-77133501D01* +X125990602Y-77279172D01* +X125990609Y-77279185D01* +X126078210Y-77410288D01* +X126078213Y-77410292D01* +X126189707Y-77521786D01* +X126189711Y-77521789D01* +X126320814Y-77609390D01* +X126320827Y-77609397D01* +X126411364Y-77646898D01* +X126466503Y-77669737D01* +X126621153Y-77700499D01* +X126621156Y-77700500D01* +X126621158Y-77700500D01* +X126778844Y-77700500D01* +X126778845Y-77700499D01* +X126933497Y-77669737D01* +X127079179Y-77609394D01* +X127210289Y-77521789D01* +X127321789Y-77410289D01* +X127409394Y-77279179D01* +X127420043Y-77253468D01* +X127463884Y-77199065D01* +X127530178Y-77176999D01* +X127597877Y-77194277D01* +X127603497Y-77197819D01* +X127620813Y-77209389D01* +X127620815Y-77209390D01* +X127620821Y-77209394D01* +X127620823Y-77209395D01* X127620827Y-77209397D01* -X127766498Y-77269735D01* +X127727228Y-77253469D01* X127766503Y-77269737D01* X127921153Y-77300499D01* X127921156Y-77300500D01* @@ -8384,93 +8292,100 @@ X128078845Y-77300499D01* X128233497Y-77269737D01* X128379179Y-77209394D01* X128510289Y-77121789D01* +X128510925Y-77121153D01* +X130149500Y-77121153D01* +X130149500Y-77278846D01* +X130180261Y-77433489D01* +X130180264Y-77433501D01* +X130240602Y-77579172D01* +X130240609Y-77579185D01* +X130328210Y-77710288D01* +X130328213Y-77710292D01* +X130439707Y-77821786D01* +X130439711Y-77821789D01* +X130570814Y-77909390D01* +X130570827Y-77909397D01* +X130716498Y-77969735D01* +X130716503Y-77969737D01* +X130866131Y-77999500D01* +X130871153Y-78000499D01* +X130871156Y-78000500D01* +X130871158Y-78000500D01* +X131028844Y-78000500D01* +X131028845Y-78000499D01* +X131183497Y-77969737D01* +X131329179Y-77909394D01* +X131460289Y-77821789D01* +X131571789Y-77710289D01* +X131659394Y-77579179D01* +X131719737Y-77433497D01* +X131750500Y-77278842D01* +X131750500Y-77121158D01* +X131750500Y-77121155D01* +X131750499Y-77121153D01* +X131747698Y-77107071D01* +X131719737Y-76966503D01* +X131700955Y-76921158D01* +X131659397Y-76820827D01* +X131659390Y-76820814D01* +X131571789Y-76689711D01* +X131571786Y-76689707D01* +X131460292Y-76578213D01* +X131460288Y-76578210D01* +X131329185Y-76490609D01* +X131329172Y-76490602D01* +X131183501Y-76430264D01* +X131183489Y-76430261D01* +X131028845Y-76399500D01* +X131028842Y-76399500D01* +X130871158Y-76399500D01* +X130871155Y-76399500D01* +X130716510Y-76430261D01* +X130716498Y-76430264D01* +X130570827Y-76490602D01* +X130570814Y-76490609D01* +X130439711Y-76578210D01* +X130439707Y-76578213D01* +X130328213Y-76689707D01* +X130328210Y-76689711D01* +X130240609Y-76820814D01* +X130240602Y-76820827D01* +X130180264Y-76966498D01* +X130180261Y-76966510D01* +X130149500Y-77121153D01* +X128510925Y-77121153D01* +X128553236Y-77078842D01* +X128604694Y-77027385D01* +X128621786Y-77010292D01* X128621789Y-77010289D01* X128709394Y-76879179D01* -X128709395Y-76879176D01* -X128709397Y-76879173D01* -X128712719Y-76871153D01* -X130099500Y-76871153D01* -X130099500Y-77028846D01* -X130130261Y-77183489D01* -X130130264Y-77183501D01* -X130190602Y-77329172D01* -X130190609Y-77329185D01* -X130278210Y-77460288D01* -X130278213Y-77460292D01* -X130389707Y-77571786D01* -X130389711Y-77571789D01* -X130520814Y-77659390D01* -X130520827Y-77659397D01* -X130666498Y-77719735D01* -X130666503Y-77719737D01* -X130818644Y-77750000D01* -X130821153Y-77750499D01* -X130821156Y-77750500D01* -X130821158Y-77750500D01* -X130978844Y-77750500D01* -X130978845Y-77750499D01* -X131133497Y-77719737D01* -X131277011Y-77660292D01* -X131279172Y-77659397D01* -X131279172Y-77659396D01* -X131279179Y-77659394D01* -X131410289Y-77571789D01* -X131521789Y-77460289D01* -X131609394Y-77329179D01* -X131669737Y-77183497D01* -X131700500Y-77028842D01* -X131700500Y-76871158D01* -X131700500Y-76871155D01* -X131700499Y-76871153D01* -X131685839Y-76797453D01* -X131669737Y-76716503D01* -X131663957Y-76702548D01* -X131609397Y-76570827D01* -X131609390Y-76570814D01* -X131521789Y-76439711D01* -X131521786Y-76439707D01* -X131410292Y-76328213D01* -X131410288Y-76328210D01* -X131324897Y-76271153D01* +X128769737Y-76733497D01* +X128800500Y-76578842D01* +X128800500Y-76421158D01* +X128800500Y-76421155D01* +X128800499Y-76421153D01* +X128774264Y-76289257D01* +X128770662Y-76271153D01* X132549500Y-76271153D01* X132549500Y-76428846D01* X132580261Y-76583489D01* X132580264Y-76583501D01* -X132629575Y-76702549D01* -X132637044Y-76772018D01* -X132629575Y-76797453D01* -X132580264Y-76916501D01* -X132580261Y-76916513D01* -X132549500Y-77071156D01* -X132549500Y-77228849D01* -X132580261Y-77383492D01* -X132580264Y-77383504D01* -X132640602Y-77529175D01* -X132640609Y-77529188D01* -X132728210Y-77660291D01* -X132728213Y-77660295D01* -X132839707Y-77771789D01* -X132839711Y-77771792D01* -X132970814Y-77859393D01* -X132970827Y-77859400D01* -X133116498Y-77919738D01* -X133116503Y-77919740D01* -X133271153Y-77950502D01* -X133271156Y-77950503D01* -X133271158Y-77950503D01* -X133428844Y-77950503D01* -X133428845Y-77950502D01* -X133583497Y-77919740D01* -X133723834Y-77861611D01* -X133729172Y-77859400D01* -X133729172Y-77859399D01* -X133729179Y-77859397D01* -X133860289Y-77771792D01* -X133971789Y-77660292D01* -X134059394Y-77529182D01* -X134119737Y-77383500D01* -X134150500Y-77228845D01* -X134150500Y-77121153D01* +X132640602Y-76729172D01* +X132640609Y-76729185D01* +X132728210Y-76860288D01* +X132728213Y-76860292D01* +X132839707Y-76971786D01* +X132839711Y-76971789D01* +X132970814Y-77059390D01* +X132970827Y-77059397D01* +X133091366Y-77109325D01* +X133116503Y-77119737D01* +X133271153Y-77150499D01* +X133271156Y-77150500D01* +X133271158Y-77150500D01* +X133428844Y-77150500D01* +X133428845Y-77150499D01* +X133576378Y-77121153D01* X142799500Y-77121153D01* X142799500Y-77278846D01* X142830261Y-77433489D01* @@ -8485,6 +8400,7 @@ X143220814Y-77909390D01* X143220827Y-77909397D01* X143366498Y-77969735D01* X143366503Y-77969737D01* +X143516131Y-77999500D01* X143521153Y-78000499D01* X143521156Y-78000500D01* X143521158Y-78000500D01* @@ -8577,7 +8493,7 @@ X146300500Y-80578842D01* X146300500Y-80421158D01* X146300500Y-80421155D01* X146300499Y-80421153D01* -X146287807Y-80357345D01* +X146283063Y-80333497D01* X146269737Y-80266503D01* X146256206Y-80233836D01* X146209397Y-80120827D01* @@ -8608,7 +8524,7 @@ X145800500Y-78578842D01* X145800500Y-78421158D01* X145800500Y-78421155D01* X145800499Y-78421153D01* -X145786701Y-78351788D01* +X145774353Y-78289711D01* X145769737Y-78266503D01* X145769735Y-78266498D01* X145709397Y-78120827D01* @@ -8627,14 +8543,14 @@ X145510289Y-77621789D01* X145621789Y-77510289D01* X145709394Y-77379179D01* X145769737Y-77233497D01* -X145779684Y-77183489D01* +X145780975Y-77176999D01* X145788655Y-77138389D01* X149399500Y-77138389D01* X149399500Y-77861611D01* X149407067Y-77909390D01* -X149421497Y-78000499D01* +X149426211Y-78030263D01* X149426598Y-78032701D01* -X149472839Y-78175016D01* +X149473877Y-78178211D01* X149480128Y-78197447D01* X149515317Y-78266510D01* X149558768Y-78351788D01* @@ -8681,7 +8597,7 @@ X153318656Y-76282288D01* X153193559Y-76205128D01* X153169336Y-76190187D01* X153169331Y-76190185D01* -X153139382Y-76180261D01* +X153167862Y-76189698D01* X153002797Y-76135001D01* X153002795Y-76135000D01* X152900010Y-76124500D01* @@ -8705,25 +8621,25 @@ X150922445Y-76205127D01* X150757701Y-76151598D01* X150757699Y-76151597D01* X150757698Y-76151597D01* -X150626271Y-76130781D01* +X150622997Y-76130263D01* X150586611Y-76124500D01* X150413389Y-76124500D01* -X150373728Y-76130781D01* +X150377003Y-76130263D01* X150242302Y-76151597D01* X150077552Y-76205128D01* X149923211Y-76283768D01* -X149862039Y-76328213D01* +X149843256Y-76341859D01* X149783072Y-76385586D01* X149783070Y-76385588D01* X149783069Y-76385588D01* X149660588Y-76508069D01* X149660588Y-76508070D01* X149660586Y-76508072D01* -X149653905Y-76517268D01* +X149651319Y-76520827D01* X149558768Y-76648211D01* X149480128Y-76802552D01* X149426597Y-76967302D01* -X149410148Y-77071158D01* +X149402454Y-77119737D01* X149399500Y-77138389D01* X145788655Y-77138389D01* X145794437Y-77109325D01* @@ -8732,9 +8648,9 @@ X145800499Y-77078846D01* X145800500Y-77078844D01* X145800500Y-76921155D01* X145800499Y-76921153D01* -X145792150Y-76879179D01* +X145781369Y-76824981D01* X145769737Y-76766503D01* -X145753344Y-76726926D01* +X145756062Y-76733489D01* X145709397Y-76620827D01* X145709390Y-76620814D01* X145621789Y-76489711D01* @@ -8784,15 +8700,15 @@ X142890602Y-76820827D01* X142830264Y-76966498D01* X142830261Y-76966510D01* X142799500Y-77121153D01* -X134150500Y-77121153D01* -X134150500Y-77071161D01* -X134150500Y-77071158D01* -X134150499Y-77071156D01* -X134142083Y-77028846D01* -X134119737Y-76916506D01* -X134070423Y-76797452D01* -X134062955Y-76727984D01* -X134070424Y-76702549D01* +X133576378Y-77121153D01* +X133583497Y-77119737D01* +X133729179Y-77059394D01* +X133729185Y-77059390D01* +X133800164Y-77011964D01* +X133849733Y-76978842D01* +X133860289Y-76971789D01* +X133971789Y-76860289D01* +X134059394Y-76729179D01* X134119737Y-76583497D01* X134150500Y-76428842D01* X134150500Y-76271158D01* @@ -8829,39 +8745,8 @@ X132640602Y-75970827D01* X132580264Y-76116498D01* X132580261Y-76116510D01* X132549500Y-76271153D01* -X131324897Y-76271153D01* -X131279185Y-76240609D01* -X131279172Y-76240602D01* -X131133501Y-76180264D01* -X131133489Y-76180261D01* -X130978845Y-76149500D01* -X130978842Y-76149500D01* -X130821158Y-76149500D01* -X130821155Y-76149500D01* -X130666510Y-76180261D01* -X130666498Y-76180264D01* -X130520827Y-76240602D01* -X130520814Y-76240609D01* -X130389711Y-76328210D01* -X130389707Y-76328213D01* -X130278213Y-76439707D01* -X130278210Y-76439711D01* -X130190609Y-76570814D01* -X130190602Y-76570827D01* -X130130264Y-76716498D01* -X130130261Y-76716510D01* -X130099500Y-76871153D01* -X128712719Y-76871153D01* -X128734895Y-76817614D01* -X128734895Y-76817613D01* -X128741132Y-76802555D01* -X128769737Y-76733497D01* -X128800500Y-76578842D01* -X128800500Y-76421158D01* -X128800500Y-76421155D01* -X128800499Y-76421153D01* -X128782012Y-76328213D01* -X128769737Y-76266503D01* +X128770662Y-76271153D01* +X128769738Y-76266507D01* X128769735Y-76266498D01* X128709396Y-76120825D01* X128709394Y-76120822D01* @@ -8886,7 +8771,7 @@ X138289707Y-76221786D01* X138289711Y-76221789D01* X138420814Y-76309390D01* X138420827Y-76309397D01* -X138466254Y-76328213D01* +X138566498Y-76369735D01* X138566503Y-76369737D01* X138716131Y-76399500D01* X138721153Y-76400499D01* @@ -8950,45 +8835,23 @@ X128621786Y-74989707D01* X128510292Y-74878213D01* X128510288Y-74878210D01* X128379185Y-74790609D01* -X128379172Y-74790602D01* -X128233501Y-74730264D01* -X128233489Y-74730261D01* -X128078845Y-74699500D01* -X128078842Y-74699500D01* -X128024838Y-74699500D01* -X127957799Y-74679815D01* -X127912044Y-74627011D01* -X127910275Y-74622949D01* -X127909394Y-74620821D01* -X127909391Y-74620816D01* -X127909390Y-74620814D01* -X127821789Y-74489711D01* -X127821786Y-74489707D01* -X127710292Y-74378213D01* -X127710288Y-74378210D01* -X127579185Y-74290609D01* -X127579172Y-74290602D01* -X127433501Y-74230264D01* -X127433489Y-74230261D01* -X127278845Y-74199500D01* -X127278842Y-74199500D01* -X127121158Y-74199500D01* -X127121155Y-74199500D01* -X126966510Y-74230261D01* -X126966498Y-74230264D01* -X126820827Y-74290602D01* -X126820814Y-74290609D01* -X126689711Y-74378210D01* -X126689707Y-74378213D01* -X126578213Y-74489707D01* -X126578210Y-74489711D01* -X126490609Y-74620814D01* -X126490602Y-74620827D01* -X126430264Y-74766498D01* -X126430261Y-74766510D01* -X126399500Y-74921153D01* -X120250500Y-74921153D01* -X120250500Y-73821153D01* +X128379173Y-74790603D01* +X128359771Y-74782566D01* +X128305368Y-74738724D01* +X128283305Y-74672429D01* +X128300585Y-74604730D01* +X128304106Y-74599143D01* +X128333659Y-74554914D01* +X128394002Y-74409232D01* +X128424765Y-74254577D01* +X128424765Y-74096893D01* +X128424765Y-74096890D01* +X128424764Y-74096888D01* +X128394003Y-73942245D01* +X128394002Y-73942238D01* +X128367885Y-73879185D01* +X128360982Y-73862518D01* +X128343848Y-73821153D01* X130449500Y-73821153D01* X130449500Y-73978846D01* X130480261Y-74133489D01* @@ -9003,14 +8866,13 @@ X130870814Y-74609390D01* X130870827Y-74609397D01* X131005378Y-74665129D01* X131016503Y-74669737D01* -X131166131Y-74699500D01* X131171153Y-74700499D01* X131171156Y-74700500D01* X131171158Y-74700500D01* X131328844Y-74700500D01* X131328845Y-74700499D01* X131483497Y-74669737D01* -X131601596Y-74620819D01* +X131601592Y-74620821D01* X131629172Y-74609397D01* X131629172Y-74609396D01* X131629179Y-74609394D01* @@ -9019,40 +8881,7 @@ X131871789Y-74410289D01* X131959394Y-74279179D01* X132019737Y-74133497D01* X132050500Y-73978842D01* -X132050500Y-73821158D01* -X132050500Y-73821155D01* -X132050499Y-73821153D01* -X132024264Y-73689257D01* -X132020662Y-73671153D01* -X138449500Y-73671153D01* -X138449500Y-73828846D01* -X138480261Y-73983489D01* -X138480264Y-73983501D01* -X138540602Y-74129172D01* -X138540609Y-74129185D01* -X138628210Y-74260288D01* -X138628213Y-74260292D01* -X138739707Y-74371786D01* -X138739711Y-74371789D01* -X138870814Y-74459390D01* -X138870827Y-74459397D01* -X139016498Y-74519735D01* -X139016503Y-74519737D01* -X139171153Y-74550499D01* -X139171156Y-74550500D01* -X139171158Y-74550500D01* -X139328844Y-74550500D01* -X139328845Y-74550499D01* -X139483497Y-74519737D01* -X139596166Y-74473067D01* -X139629172Y-74459397D01* -X139629172Y-74459396D01* -X139629179Y-74459394D01* -X139760289Y-74371789D01* -X139871789Y-74260289D01* -X139959394Y-74129179D01* -X140019737Y-73983497D01* -X140040943Y-73876888D01* +X132050500Y-73876888D01* X147743765Y-73876888D01* X147743765Y-74034581D01* X147774526Y-74189224D01* @@ -9122,9 +8951,9 @@ X151300500Y-75078842D01* X151300500Y-74921158D01* X151300500Y-74921155D01* X151300499Y-74921153D01* -X151281769Y-74826991D01* +X151293333Y-74885127D01* X151269737Y-74766503D01* -X151264249Y-74753254D01* +X151242398Y-74700500D01* X151209397Y-74620827D01* X151209390Y-74620814D01* X151121789Y-74489711D01* @@ -9166,9 +8995,9 @@ X149344765Y-74034577D01* X149344765Y-73876893D01* X149344765Y-73876890D01* X149344764Y-73876888D01* -X149335207Y-73828842D01* +X149341906Y-73862518D01* X149314002Y-73722238D01* -X149290914Y-73666498D01* +X149254606Y-73578842D01* X149253662Y-73576562D01* X149253655Y-73576549D01* X149166054Y-73445446D01* @@ -9196,44 +9025,12 @@ X147834867Y-73576562D01* X147774529Y-73722233D01* X147774526Y-73722245D01* X147743765Y-73876888D01* -X140040943Y-73876888D01* -X140050500Y-73828842D01* -X140050500Y-73671158D01* -X140050500Y-73671155D01* -X140050499Y-73671153D01* -X140049573Y-73666498D01* -X140019737Y-73516503D01* -X140019735Y-73516498D01* -X139959397Y-73370827D01* -X139959390Y-73370814D01* -X139871789Y-73239711D01* -X139871786Y-73239707D01* -X139760292Y-73128213D01* -X139760288Y-73128210D01* -X139629185Y-73040609D01* -X139629172Y-73040602D01* -X139483501Y-72980264D01* -X139483489Y-72980261D01* -X139328845Y-72949500D01* -X139328842Y-72949500D01* -X139171158Y-72949500D01* -X139171155Y-72949500D01* -X139016510Y-72980261D01* -X139016498Y-72980264D01* -X138870827Y-73040602D01* -X138870814Y-73040609D01* -X138739711Y-73128210D01* -X138739707Y-73128213D01* -X138628213Y-73239707D01* -X138628210Y-73239711D01* -X138540609Y-73370814D01* -X138540602Y-73370827D01* -X138480264Y-73516498D01* -X138480261Y-73516510D01* -X138449500Y-73671153D01* -X132020662Y-73671153D01* -X132019738Y-73666507D01* -X132019735Y-73666498D01* +X132050500Y-73876888D01* +X132050500Y-73821158D01* +X132050500Y-73821155D01* +X132050499Y-73821153D01* +X132019737Y-73666503D01* +X131973115Y-73553946D01* X131959397Y-73520827D01* X131959390Y-73520814D01* X131871789Y-73389711D01* @@ -9261,244 +9058,312 @@ X130540602Y-73520827D01* X130480264Y-73666498D01* X130480261Y-73666510D01* X130449500Y-73821153D01* -X120250500Y-73821153D01* -X120250500Y-71021153D01* -X123099500Y-71021153D01* -X123099500Y-71178846D01* -X123130261Y-71333489D01* -X123130264Y-71333501D01* -X123190602Y-71479172D01* -X123190609Y-71479185D01* -X123278210Y-71610288D01* -X123278213Y-71610292D01* -X123389707Y-71721786D01* -X123389711Y-71721789D01* -X123520814Y-71809390D01* -X123520827Y-71809397D01* -X123666498Y-71869735D01* -X123666503Y-71869737D01* -X123821153Y-71900499D01* -X123821156Y-71900500D01* -X123821158Y-71900500D01* -X123978844Y-71900500D01* -X123978845Y-71900499D01* -X124133497Y-71869737D01* -X124279179Y-71809394D01* -X124390811Y-71734803D01* -X124457485Y-71713927D01* -X124524865Y-71732411D01* -X124571555Y-71784389D01* -X124581316Y-71813715D01* -X124605141Y-71933490D01* -X124605144Y-71933500D01* -X124665482Y-72079171D01* -X124665489Y-72079184D01* -X124753090Y-72210287D01* -X124753093Y-72210291D01* -X124864587Y-72321785D01* -X124864591Y-72321788D01* -X124995694Y-72409389D01* -X124995707Y-72409396D01* -X125141378Y-72469734D01* -X125141383Y-72469736D01* -X125296033Y-72500498D01* -X125296036Y-72500499D01* -X125296038Y-72500499D01* -X125453724Y-72500499D01* -X125453725Y-72500498D01* -X125608377Y-72469736D01* -X125754059Y-72409393D01* -X125885169Y-72321788D01* -X125996669Y-72210288D01* -X126084274Y-72079178D01* -X126144617Y-71933496D01* -X126175380Y-71778841D01* -X126175380Y-71621157D01* -X126175380Y-71621154D01* -X126175379Y-71621152D01* -X126163432Y-71561090D01* -X126144617Y-71466502D01* -X126108308Y-71378844D01* -X126084277Y-71320826D01* -X126084273Y-71320819D01* -X126074630Y-71306387D01* -X126017679Y-71221153D01* -X126699500Y-71221153D01* -X126699500Y-71378846D01* -X126730261Y-71533489D01* -X126730264Y-71533501D01* -X126790602Y-71679172D01* -X126790609Y-71679185D01* -X126878210Y-71810288D01* -X126878213Y-71810292D01* -X126989707Y-71921786D01* -X126989711Y-71921789D01* -X127120814Y-72009390D01* -X127120827Y-72009397D01* -X127266498Y-72069735D01* -X127266503Y-72069737D01* -X127421153Y-72100499D01* -X127421156Y-72100500D01* -X127421158Y-72100500D01* -X127578844Y-72100500D01* -X127578845Y-72100499D01* -X127733497Y-72069737D01* -X127879179Y-72009394D01* -X128010289Y-71921789D01* -X128121789Y-71810289D01* -X128147939Y-71771153D01* -X132449500Y-71771153D01* -X132449500Y-71928846D01* -X132480261Y-72083489D01* -X132480264Y-72083501D01* -X132540602Y-72229172D01* -X132540609Y-72229185D01* -X132628210Y-72360288D01* -X132628213Y-72360292D01* -X132739707Y-72471786D01* -X132739711Y-72471789D01* -X132870814Y-72559390D01* -X132870827Y-72559397D01* -X133016498Y-72619735D01* -X133016503Y-72619737D01* -X133171153Y-72650499D01* -X133171156Y-72650500D01* -X133171158Y-72650500D01* -X133328844Y-72650500D01* -X133328845Y-72650499D01* -X133483497Y-72619737D01* -X133629179Y-72559394D01* -X133760289Y-72471789D01* -X133871789Y-72360289D01* -X133959394Y-72229179D01* -X134019737Y-72083497D01* -X134050500Y-71928842D01* -X134050500Y-71771158D01* -X134050500Y-71771155D01* -X134050499Y-71771153D01* -X134035585Y-71696175D01* -X134019737Y-71616503D01* -X134017163Y-71610288D01* -X133959397Y-71470827D01* -X133959390Y-71470814D01* -X133871789Y-71339711D01* -X133871786Y-71339707D01* -X133760292Y-71228213D01* -X133760288Y-71228210D01* -X133629185Y-71140609D01* -X133629172Y-71140602D01* -X133483501Y-71080264D01* -X133483489Y-71080261D01* -X133328845Y-71049500D01* -X133328842Y-71049500D01* -X133171158Y-71049500D01* -X133171155Y-71049500D01* -X133016510Y-71080261D01* -X133016498Y-71080264D01* -X132870827Y-71140602D01* -X132870814Y-71140609D01* -X132739711Y-71228210D01* -X132739707Y-71228213D01* -X132628213Y-71339707D01* -X132628210Y-71339711D01* -X132540609Y-71470814D01* -X132540602Y-71470827D01* -X132480264Y-71616498D01* -X132480261Y-71616510D01* -X132449500Y-71771153D01* -X128147939Y-71771153D01* -X128172226Y-71734805D01* -X128198038Y-71696175D01* -X128198038Y-71696174D01* -X128209394Y-71679179D01* -X128269737Y-71533497D01* -X128300500Y-71378842D01* -X128300500Y-71221158D01* -X128300500Y-71221155D01* -X128300499Y-71221153D01* -X128300427Y-71220793D01* -X128269737Y-71066503D01* -X128259859Y-71042656D01* -X128209397Y-70920827D01* -X128209390Y-70920814D01* -X128121789Y-70789711D01* -X128121786Y-70789707D01* -X128010292Y-70678213D01* -X128010288Y-70678210D01* -X127879185Y-70590609D01* -X127879172Y-70590602D01* -X127733501Y-70530264D01* -X127733489Y-70530261D01* -X127578845Y-70499500D01* -X127578842Y-70499500D01* -X127421158Y-70499500D01* -X127421155Y-70499500D01* -X127266510Y-70530261D01* -X127266498Y-70530264D01* -X127120827Y-70590602D01* -X127120814Y-70590609D01* -X126989711Y-70678210D01* -X126989707Y-70678213D01* -X126878213Y-70789707D01* -X126878210Y-70789711D01* -X126790609Y-70920814D01* -X126790602Y-70920827D01* -X126730264Y-71066498D01* -X126730261Y-71066510D01* -X126699500Y-71221153D01* -X126017679Y-71221153D01* -X125996669Y-71189709D01* -X125885172Y-71078212D01* -X125885168Y-71078209D01* -X125754065Y-70990608D01* -X125754052Y-70990601D01* -X125608381Y-70930263D01* -X125608369Y-70930260D01* -X125453725Y-70899499D01* -X125453722Y-70899499D01* -X125296038Y-70899499D01* -X125296035Y-70899499D01* -X125141390Y-70930260D01* -X125141378Y-70930263D01* -X124995707Y-70990601D01* -X124995694Y-70990608D01* -X124884071Y-71065193D01* -X124817393Y-71086071D01* -X124750013Y-71067586D01* -X124703323Y-71015607D01* -X124693563Y-70986282D01* -X124675512Y-70895538D01* -X124669737Y-70866503D01* -X124637929Y-70789711D01* -X124609397Y-70720827D01* -X124609390Y-70720814D01* -X124521789Y-70589711D01* -X124521786Y-70589707D01* -X124410292Y-70478213D01* -X124410288Y-70478210D01* -X124279185Y-70390609D01* -X124279172Y-70390602D01* -X124133501Y-70330264D01* -X124133489Y-70330261D01* -X123978845Y-70299500D01* -X123978842Y-70299500D01* -X123821158Y-70299500D01* -X123821155Y-70299500D01* -X123666510Y-70330261D01* -X123666498Y-70330264D01* -X123520827Y-70390602D01* -X123520814Y-70390609D01* -X123389711Y-70478210D01* -X123389707Y-70478213D01* -X123278213Y-70589707D01* -X123278210Y-70589711D01* -X123190609Y-70720814D01* -X123190602Y-70720827D01* -X123130264Y-70866498D01* -X123130261Y-70866510D01* -X123099500Y-71021153D01* -X120250500Y-71021153D01* -X120250500Y-70021153D01* +X128343848Y-73821153D01* +X128333660Y-73796558D01* +X128333655Y-73796549D01* +X128246054Y-73665446D01* +X128246051Y-73665442D01* +X128134557Y-73553948D01* +X128134553Y-73553945D01* +X128003450Y-73466344D01* +X128003437Y-73466337D01* +X127857766Y-73405999D01* +X127857754Y-73405996D01* +X127703110Y-73375235D01* +X127703107Y-73375235D01* +X127545423Y-73375235D01* +X127545420Y-73375235D01* +X127390775Y-73405996D01* +X127390763Y-73405999D01* +X127245092Y-73466337D01* +X127245079Y-73466344D01* +X127113976Y-73553945D01* +X127113972Y-73553948D01* +X127002478Y-73665442D01* +X127002475Y-73665446D01* +X126914874Y-73796549D01* +X126914867Y-73796562D01* +X126854529Y-73942233D01* +X126854526Y-73942245D01* +X126823765Y-74096888D01* +X126823765Y-74254581D01* +X126854526Y-74409224D01* +X126854529Y-74409236D01* +X126914867Y-74554907D01* +X126914874Y-74554920D01* +X127002475Y-74686023D01* +X127002478Y-74686027D01* +X127113972Y-74797521D01* +X127113976Y-74797524D01* +X127245079Y-74885125D01* +X127245081Y-74885126D01* +X127245086Y-74885129D01* +X127264489Y-74893166D01* +X127318892Y-74937003D01* +X127340959Y-75003297D01* +X127323682Y-75070997D01* +X127320141Y-75076617D01* +X127290608Y-75120816D01* +X127290602Y-75120827D01* +X127230264Y-75266498D01* +X127230261Y-75266510D01* +X127199500Y-75421153D01* +X127199500Y-75578846D01* +X127230261Y-75733489D01* +X127230264Y-75733501D01* +X127290602Y-75879172D01* +X127290609Y-75879185D01* +X127325304Y-75931109D01* +X127346182Y-75997786D01* +X127327698Y-76065167D01* +X127325304Y-76068891D01* +X127290609Y-76120814D01* +X127290604Y-76120823D01* +X127279954Y-76146535D01* +X127236111Y-76200937D01* +X127169817Y-76223000D01* +X127102118Y-76205719D01* +X127096503Y-76202181D01* +X127079185Y-76190609D01* +X127079172Y-76190602D01* +X126933501Y-76130264D01* +X126933489Y-76130261D01* +X126778845Y-76099500D01* +X126778842Y-76099500D01* +X126621158Y-76099500D01* +X126621155Y-76099500D01* +X126466510Y-76130261D01* +X126466498Y-76130264D01* +X126320827Y-76190602D01* +X126320814Y-76190609D01* +X126189711Y-76278210D01* +X126189707Y-76278213D01* +X126078213Y-76389707D01* +X126078210Y-76389711D01* +X125990609Y-76520814D01* +X125990602Y-76520827D01* +X125930264Y-76666498D01* +X125930261Y-76666510D01* +X125899500Y-76821153D01* +X120250500Y-76821153D01* +X120250500Y-73421153D01* +X124899500Y-73421153D01* +X124899500Y-73578846D01* +X124930261Y-73733489D01* +X124930264Y-73733501D01* +X124990602Y-73879172D01* +X124990609Y-73879185D01* +X125078210Y-74010288D01* +X125078213Y-74010292D01* +X125189707Y-74121786D01* +X125189711Y-74121789D01* +X125320814Y-74209390D01* +X125320827Y-74209397D01* +X125466498Y-74269735D01* +X125466503Y-74269737D01* +X125621153Y-74300499D01* +X125621156Y-74300500D01* +X125621158Y-74300500D01* +X125778844Y-74300500D01* +X125778845Y-74300499D01* +X125933497Y-74269737D01* +X126079179Y-74209394D01* +X126210289Y-74121789D01* +X126321789Y-74010289D01* +X126409394Y-73879179D01* +X126469737Y-73733497D01* +X126500500Y-73578842D01* +X126500500Y-73421158D01* +X126500500Y-73421155D01* +X126500499Y-73421153D01* +X126472066Y-73278211D01* +X126469737Y-73266503D01* +X126438298Y-73190602D01* +X126409397Y-73120827D01* +X126409390Y-73120814D01* +X126321789Y-72989711D01* +X126321786Y-72989707D01* +X126210292Y-72878213D01* +X126210288Y-72878210D01* +X126079185Y-72790609D01* +X126079172Y-72790602D01* +X125933501Y-72730264D01* +X125933489Y-72730261D01* +X125778845Y-72699500D01* +X125778842Y-72699500D01* +X125621158Y-72699500D01* +X125621155Y-72699500D01* +X125466510Y-72730261D01* +X125466498Y-72730264D01* +X125320827Y-72790602D01* +X125320814Y-72790609D01* +X125189711Y-72878210D01* +X125189707Y-72878213D01* +X125078213Y-72989707D01* +X125078210Y-72989711D01* +X124990609Y-73120814D01* +X124990602Y-73120827D01* +X124930264Y-73266498D01* +X124930261Y-73266510D01* +X124899500Y-73421153D01* +X120250500Y-73421153D01* +X120250500Y-71721153D01* +X139899500Y-71721153D01* +X139899500Y-71878846D01* +X139930261Y-72033489D01* +X139930264Y-72033501D01* +X139990602Y-72179172D01* +X139990609Y-72179185D01* +X140078210Y-72310288D01* +X140078213Y-72310292D01* +X140189707Y-72421786D01* +X140189711Y-72421789D01* +X140320814Y-72509390D01* +X140320827Y-72509397D01* +X140466498Y-72569735D01* +X140466503Y-72569737D01* +X140621153Y-72600499D01* +X140621156Y-72600500D01* +X140621158Y-72600500D01* +X140778844Y-72600500D01* +X140778845Y-72600499D01* +X140933497Y-72569737D01* +X141079179Y-72509394D01* +X141210289Y-72421789D01* +X141321789Y-72310289D01* +X141409394Y-72179179D01* +X141469737Y-72033497D01* +X141500500Y-71878842D01* +X141500500Y-71721158D01* +X141500500Y-71721155D01* +X141500499Y-71721153D01* +X141478269Y-71609397D01* +X141469737Y-71566503D01* +X141451215Y-71521786D01* +X141409397Y-71420827D01* +X141409390Y-71420814D01* +X141321789Y-71289711D01* +X141321786Y-71289707D01* +X141210292Y-71178213D01* +X141210288Y-71178210D01* +X141079185Y-71090609D01* +X141079172Y-71090602D01* +X140933501Y-71030264D01* +X140933489Y-71030261D01* +X140778845Y-70999500D01* +X140778842Y-70999500D01* +X140621158Y-70999500D01* +X140621155Y-70999500D01* +X140466510Y-71030261D01* +X140466498Y-71030264D01* +X140320827Y-71090602D01* +X140320814Y-71090609D01* +X140189711Y-71178210D01* +X140189707Y-71178213D01* +X140078213Y-71289707D01* +X140078210Y-71289711D01* +X139990609Y-71420814D01* +X139990602Y-71420827D01* +X139930264Y-71566498D01* +X139930261Y-71566510D01* +X139899500Y-71721153D01* +X120250500Y-71721153D01* +X120250500Y-69074038D01* +X121699500Y-69074038D01* +X121699500Y-69325962D01* +X121738910Y-69574785D01* +X121816760Y-69814383D01* +X121895413Y-69968747D01* +X121922115Y-70021153D01* +X121931132Y-70038848D01* +X122079201Y-70242649D01* +X122079205Y-70242654D01* +X122257345Y-70420794D01* +X122257350Y-70420798D01* +X122380525Y-70510289D01* +X122461155Y-70568870D01* +X122565009Y-70621786D01* +X122685616Y-70683239D01* +X122685618Y-70683239D01* +X122685621Y-70683241D01* +X122925215Y-70761090D01* +X123174038Y-70800500D01* +X123174039Y-70800500D01* +X123425961Y-70800500D01* +X123425962Y-70800500D01* +X123674785Y-70761090D01* +X123914379Y-70683241D01* +X124138845Y-70568870D01* +X124342656Y-70420793D01* +X124520793Y-70242656D01* +X124668870Y-70038845D01* +X124728837Y-69921153D01* +X132549500Y-69921153D01* +X132549500Y-70078846D01* +X132580261Y-70233489D01* +X132580264Y-70233501D01* +X132640602Y-70379172D01* +X132640609Y-70379185D01* +X132728210Y-70510288D01* +X132728213Y-70510292D01* +X132839707Y-70621786D01* +X132839711Y-70621789D01* +X132970814Y-70709390D01* +X132970827Y-70709397D01* +X133072952Y-70751698D01* +X133127356Y-70795538D01* +X133149421Y-70861833D01* +X133149500Y-70866259D01* +X133149500Y-70978846D01* +X133180261Y-71133489D01* +X133180264Y-71133501D01* +X133240602Y-71279172D01* +X133240609Y-71279185D01* +X133328210Y-71410288D01* +X133328213Y-71410292D01* +X133439707Y-71521786D01* +X133439711Y-71521789D01* +X133570814Y-71609390D01* +X133570827Y-71609397D01* +X133716498Y-71669735D01* +X133716503Y-71669737D01* +X133871153Y-71700499D01* +X133871156Y-71700500D01* +X133871158Y-71700500D01* +X134028844Y-71700500D01* +X134028845Y-71700499D01* +X134183497Y-71669737D01* +X134329179Y-71609394D01* +X134460289Y-71521789D01* +X134571789Y-71410289D01* +X134659394Y-71279179D01* +X134719737Y-71133497D01* +X134750500Y-70978842D01* +X134750500Y-70821158D01* +X134750500Y-70821155D01* +X134750499Y-70821153D01* +X134740272Y-70769737D01* +X134719737Y-70666503D01* +X134680102Y-70570814D01* +X134659397Y-70520827D01* +X134659390Y-70520814D01* +X134571789Y-70389711D01* +X134571786Y-70389707D01* +X134460292Y-70278213D01* +X134460288Y-70278210D01* +X134329185Y-70190609D01* +X134329175Y-70190604D01* +X134227047Y-70148301D01* +X134211481Y-70135757D01* +X134193297Y-70127453D01* +X134184832Y-70114282D01* +X134172644Y-70104460D01* +X134166331Y-70085492D01* +X134155523Y-70068675D01* +X134151560Y-70041114D01* +X134150579Y-70038166D01* +X134150500Y-70033740D01* +X134150500Y-70021153D01* X143999500Y-70021153D01* X143999500Y-70178846D01* X144030261Y-70333489D01* @@ -9526,7 +9391,7 @@ X144889707Y-71571786D01* X144889711Y-71571789D01* X145020814Y-71659390D01* X145020827Y-71659397D01* -X145152476Y-71713927D01* +X145120060Y-71700500D01* X145166503Y-71719737D01* X145321153Y-71750499D01* X145321156Y-71750500D01* @@ -9543,9 +9408,9 @@ X146200500Y-71028842D01* X146200500Y-70871158D01* X146200500Y-70871155D01* X146200499Y-70871153D01* -X146194073Y-70838848D01* +X146178606Y-70761090D01* X146169737Y-70716503D01* -X146127438Y-70614383D01* +X146155959Y-70683239D01* X146109397Y-70570827D01* X146109390Y-70570814D01* X146021789Y-70439711D01* @@ -9555,84 +9420,13 @@ X145910288Y-70328210D01* X145779185Y-70240609D01* X145779175Y-70240604D01* X145677047Y-70198301D01* -X145667602Y-70190690D01* -X145656013Y-70187111D01* -X145640904Y-70169175D01* X145622644Y-70154460D01* -X145617697Y-70141625D01* -X145610999Y-70133674D01* -X145606637Y-70112931D01* -X145601528Y-70099674D01* -X145600500Y-70091740D01* -X145600500Y-70021158D01* -X145571236Y-69874038D01* -X149999500Y-69874038D01* -X149999500Y-70125962D01* -X150026986Y-70299500D01* -X150038910Y-70374785D01* -X150116760Y-70614383D01* -X150231132Y-70838848D01* -X150379201Y-71042649D01* -X150379205Y-71042654D01* -X150557345Y-71220794D01* -X150557350Y-71220798D01* -X150695028Y-71320826D01* -X150761155Y-71368870D01* -X150904184Y-71441747D01* -X150985616Y-71483239D01* -X150985618Y-71483239D01* -X150985621Y-71483241D01* -X151225215Y-71561090D01* -X151474038Y-71600500D01* -X151474039Y-71600500D01* -X151725961Y-71600500D01* -X151725962Y-71600500D01* -X151974785Y-71561090D01* -X152214379Y-71483241D01* -X152438845Y-71368870D01* -X152642656Y-71220793D01* -X152820793Y-71042656D01* -X152968870Y-70838845D01* -X153083241Y-70614379D01* -X153161090Y-70374785D01* -X153200500Y-70125962D01* -X153200500Y-69874038D01* -X153161090Y-69625215D01* -X153083241Y-69385621D01* -X153083239Y-69385618D01* -X153083239Y-69385616D01* -X153039360Y-69299500D01* -X152968870Y-69161155D01* -X152949952Y-69135117D01* -X152820798Y-68957350D01* -X152820794Y-68957345D01* -X152642654Y-68779205D01* -X152642649Y-68779201D01* -X152438848Y-68631132D01* -X152438847Y-68631131D01* -X152438845Y-68631130D01* -X152368747Y-68595413D01* -X152214383Y-68516760D01* -X151974785Y-68438910D01* -X151866669Y-68421786D01* -X151725962Y-68399500D01* -X151474038Y-68399500D01* -X151349626Y-68419205D01* -X151225214Y-68438910D01* -X150985616Y-68516760D01* -X150761151Y-68631132D01* -X150557350Y-68779201D01* -X150557345Y-68779205D01* -X150379205Y-68957345D01* -X150379201Y-68957350D01* -X150231132Y-69161151D01* -X150116760Y-69385616D01* -X150050447Y-69589707D01* -X150038910Y-69625215D01* -X149999500Y-69874038D01* -X145571236Y-69874038D01* +X145600579Y-70088166D01* +X145600500Y-70083740D01* +X145600500Y-70021155D01* +X145600499Y-70021153D01* X145569737Y-69866503D01* -X145569735Y-69866498D01* +X145566534Y-69858771D01* X145509397Y-69720827D01* X145509390Y-69720814D01* X145421789Y-69589711D01* @@ -9660,130 +9454,218 @@ X144090602Y-69720827D01* X144030264Y-69866498D01* X144030261Y-69866510D01* X143999500Y-70021153D01* -X120250500Y-70021153D01* -X120250500Y-66921153D01* -X120699500Y-66921153D01* -X120699500Y-67078846D01* -X120730261Y-67233489D01* -X120730264Y-67233501D01* -X120790602Y-67379172D01* -X120790609Y-67379185D01* -X120878210Y-67510288D01* -X120878213Y-67510292D01* -X120989707Y-67621786D01* -X120989711Y-67621789D01* -X121120814Y-67709390D01* -X121120827Y-67709397D01* -X121266498Y-67769735D01* -X121266503Y-67769737D01* -X121421153Y-67800499D01* -X121421156Y-67800500D01* -X121421158Y-67800500D01* -X121578844Y-67800500D01* -X121578845Y-67800499D01* -X121733497Y-67769737D01* -X121850790Y-67721153D01* -X129999500Y-67721153D01* -X129999500Y-67878846D01* -X130030261Y-68033489D01* -X130030264Y-68033501D01* -X130090602Y-68179172D01* -X130090609Y-68179185D01* -X130178210Y-68310288D01* -X130178213Y-68310292D01* -X130289707Y-68421786D01* -X130289711Y-68421789D01* -X130420814Y-68509390D01* -X130420827Y-68509397D01* -X130566498Y-68569735D01* -X130566503Y-68569737D01* -X130721153Y-68600499D01* -X130721156Y-68600500D01* -X130721158Y-68600500D01* -X130878844Y-68600500D01* -X130878845Y-68600499D01* -X131033497Y-68569737D01* -X131179179Y-68509394D01* -X131310289Y-68421789D01* -X131421789Y-68310289D01* -X131509394Y-68179179D01* -X131569737Y-68033497D01* -X131600500Y-67878842D01* -X131600500Y-67721158D01* -X131600500Y-67721155D01* -X131600499Y-67721153D01* -X131580734Y-67621788D01* -X131569737Y-67566503D01* -X131546452Y-67510288D01* -X131509397Y-67420827D01* -X131509390Y-67420814D01* -X131421789Y-67289711D01* -X131421786Y-67289707D01* -X131310292Y-67178213D01* -X131310288Y-67178210D01* -X131179185Y-67090609D01* -X131179172Y-67090602D01* -X131033501Y-67030264D01* -X131033489Y-67030261D01* -X130878845Y-66999500D01* -X130878842Y-66999500D01* -X130721158Y-66999500D01* -X130721155Y-66999500D01* -X130566510Y-67030261D01* -X130566498Y-67030264D01* -X130420827Y-67090602D01* -X130420814Y-67090609D01* -X130289711Y-67178210D01* -X130289707Y-67178213D01* -X130178213Y-67289707D01* -X130178210Y-67289711D01* -X130090609Y-67420814D01* -X130090602Y-67420827D01* -X130030264Y-67566498D01* -X130030261Y-67566510D01* -X129999500Y-67721153D01* -X121850790Y-67721153D01* -X121879179Y-67709394D01* -X122010289Y-67621789D01* -X122121789Y-67510289D01* -X122209394Y-67379179D01* -X122269737Y-67233497D01* -X122300500Y-67078842D01* -X122300500Y-66921158D01* -X122300500Y-66921155D01* -X122300499Y-66921153D01* -X122269738Y-66766510D01* -X122269737Y-66766503D01* -X122269735Y-66766498D01* -X122209397Y-66620827D01* -X122209390Y-66620814D01* -X122121789Y-66489711D01* -X122121786Y-66489707D01* -X122010292Y-66378213D01* -X122010288Y-66378210D01* -X121879185Y-66290609D01* -X121879172Y-66290602D01* -X121733501Y-66230264D01* -X121733489Y-66230261D01* -X121578845Y-66199500D01* -X121578842Y-66199500D01* -X121421158Y-66199500D01* -X121421155Y-66199500D01* -X121266510Y-66230261D01* -X121266498Y-66230264D01* -X121120827Y-66290602D01* -X121120814Y-66290609D01* -X120989711Y-66378210D01* -X120989707Y-66378213D01* -X120878213Y-66489707D01* -X120878210Y-66489711D01* -X120790609Y-66620814D01* -X120790602Y-66620827D01* -X120730264Y-66766498D01* -X120730261Y-66766510D01* -X120699500Y-66921153D01* -X120250500Y-66921153D01* -X120250500Y-65021153D01* +X134150500Y-70021153D01* +X134150500Y-69921155D01* +X134150499Y-69921153D01* +X134119738Y-69766510D01* +X134119737Y-69766503D01* +X134100812Y-69720814D01* +X134059397Y-69620827D01* +X134059390Y-69620814D01* +X133971789Y-69489711D01* +X133971786Y-69489707D01* +X133860292Y-69378213D01* +X133860288Y-69378210D01* +X133729185Y-69290609D01* +X133729172Y-69290602D01* +X133583501Y-69230264D01* +X133583489Y-69230261D01* +X133428845Y-69199500D01* +X133428842Y-69199500D01* +X133271158Y-69199500D01* +X133271155Y-69199500D01* +X133116510Y-69230261D01* +X133116498Y-69230264D01* +X132970827Y-69290602D01* +X132970814Y-69290609D01* +X132839711Y-69378210D01* +X132839707Y-69378213D01* +X132728213Y-69489707D01* +X132728210Y-69489711D01* +X132640609Y-69620814D01* +X132640602Y-69620827D01* +X132580264Y-69766498D01* +X132580261Y-69766510D01* +X132549500Y-69921153D01* +X124728837Y-69921153D01* +X124783241Y-69814379D01* +X124861090Y-69574785D01* +X124900500Y-69325962D01* +X124900500Y-69074038D01* +X150099500Y-69074038D01* +X150099500Y-69325962D01* +X150138910Y-69574785D01* +X150216760Y-69814383D01* +X150295413Y-69968747D01* +X150322115Y-70021153D01* +X150331132Y-70038848D01* +X150479201Y-70242649D01* +X150479205Y-70242654D01* +X150657345Y-70420794D01* +X150657350Y-70420798D01* +X150780525Y-70510289D01* +X150861155Y-70568870D01* +X150965009Y-70621786D01* +X151085616Y-70683239D01* +X151085618Y-70683239D01* +X151085621Y-70683241D01* +X151325215Y-70761090D01* +X151574038Y-70800500D01* +X151574039Y-70800500D01* +X151825961Y-70800500D01* +X151825962Y-70800500D01* +X152074785Y-70761090D01* +X152314379Y-70683241D01* +X152538845Y-70568870D01* +X152742656Y-70420793D01* +X152920793Y-70242656D01* +X153068870Y-70038845D01* +X153183241Y-69814379D01* +X153261090Y-69574785D01* +X153300500Y-69325962D01* +X153300500Y-69074038D01* +X153261090Y-68825215D01* +X153183241Y-68585621D01* +X153183239Y-68585618D01* +X153183239Y-68585616D01* +X153141747Y-68504184D01* +X153068870Y-68361155D01* +X153049952Y-68335117D01* +X152920798Y-68157350D01* +X152920794Y-68157345D01* +X152742654Y-67979205D01* +X152742649Y-67979201D01* +X152538848Y-67831132D01* +X152538847Y-67831131D01* +X152538845Y-67831130D01* +X152468747Y-67795413D01* +X152314383Y-67716760D01* +X152074785Y-67638910D01* +X151825962Y-67599500D01* +X151574038Y-67599500D01* +X151449626Y-67619205D01* +X151325214Y-67638910D01* +X151085616Y-67716760D01* +X150861151Y-67831132D01* +X150657350Y-67979201D01* +X150657345Y-67979205D01* +X150479205Y-68157345D01* +X150479201Y-68157350D01* +X150331132Y-68361151D01* +X150216760Y-68585616D01* +X150138910Y-68825214D01* +X150138910Y-68825215D01* +X150099500Y-69074038D01* +X124900500Y-69074038D01* +X124861090Y-68825215D01* +X124783241Y-68585621D01* +X124783239Y-68585618D01* +X124783239Y-68585616D01* +X124741747Y-68504184D01* +X124668870Y-68361155D01* +X124649952Y-68335117D01* +X124520798Y-68157350D01* +X124520794Y-68157345D01* +X124342654Y-67979205D01* +X124342649Y-67979201D01* +X124138848Y-67831132D01* +X124138847Y-67831131D01* +X124138845Y-67831130D01* +X124068747Y-67795413D01* +X123914383Y-67716760D01* +X123674785Y-67638910D01* +X123425962Y-67599500D01* +X123174038Y-67599500D01* +X123049626Y-67619205D01* +X122925214Y-67638910D01* +X122685616Y-67716760D01* +X122461151Y-67831132D01* +X122257350Y-67979201D01* +X122257345Y-67979205D01* +X122079205Y-68157345D01* +X122079201Y-68157350D01* +X121931132Y-68361151D01* +X121816760Y-68585616D01* +X121738910Y-68825214D01* +X121738910Y-68825215D01* +X121699500Y-69074038D01* +X120250500Y-69074038D01* +X120250500Y-64021153D01* +X120899500Y-64021153D01* +X120899500Y-64178846D01* +X120930261Y-64333489D01* +X120930264Y-64333501D01* +X120990602Y-64479172D01* +X120990609Y-64479185D01* +X121078210Y-64610288D01* +X121078213Y-64610292D01* +X121189707Y-64721786D01* +X121189711Y-64721789D01* +X121320814Y-64809390D01* +X121320827Y-64809397D01* +X121458683Y-64866498D01* +X121466503Y-64869737D01* +X121621153Y-64900499D01* +X121621156Y-64900500D01* +X121621158Y-64900500D01* +X121778844Y-64900500D01* +X121778845Y-64900499D01* +X121933497Y-64869737D01* +X122079179Y-64809394D01* +X122210289Y-64721789D01* +X122231181Y-64700896D01* +X122292501Y-64667412D01* +X122362193Y-64672395D01* +X122418128Y-64714266D01* +X122433423Y-64741126D01* +X122490602Y-64879172D01* +X122490609Y-64879185D01* +X122578210Y-65010288D01* +X122578213Y-65010292D01* +X122689707Y-65121786D01* +X122689711Y-65121789D01* +X122820814Y-65209390D01* +X122820827Y-65209397D01* +X122966498Y-65269735D01* +X122966503Y-65269737D01* +X123121153Y-65300499D01* +X123121156Y-65300500D01* +X123121158Y-65300500D01* +X123278844Y-65300500D01* +X123278845Y-65300499D01* +X123433497Y-65269737D01* +X123579179Y-65209394D01* +X123710289Y-65121789D01* +X123821789Y-65010289D01* +X123909394Y-64879179D01* +X123969737Y-64733497D01* +X123992083Y-64621158D01* +X123992084Y-64621153D01* +X129999500Y-64621153D01* +X129999500Y-64778846D01* +X130030261Y-64933489D01* +X130030264Y-64933501D01* +X130090602Y-65079172D01* +X130090609Y-65079185D01* +X130178210Y-65210288D01* +X130178213Y-65210292D01* +X130289707Y-65321786D01* +X130289711Y-65321789D01* +X130420814Y-65409390D01* +X130420827Y-65409397D01* +X130566498Y-65469735D01* +X130566503Y-65469737D01* +X130721153Y-65500499D01* +X130721156Y-65500500D01* +X130721158Y-65500500D01* +X130878844Y-65500500D01* +X130878845Y-65500499D01* +X131033497Y-65469737D01* +X131179179Y-65409394D01* +X131310289Y-65321789D01* +X131421789Y-65210289D01* +X131509394Y-65079179D01* +X131533429Y-65021153D01* X144449500Y-65021153D01* X144449500Y-65178846D01* X144480261Y-65333489D01* @@ -9813,9 +9695,9 @@ X146050500Y-65178842D01* X146050500Y-65021158D01* X146050500Y-65021155D01* X146050499Y-65021153D01* -X146019738Y-64866510D01* +X146026499Y-64900499D01* X146019737Y-64866503D01* -X146019735Y-64866498D01* +X145967805Y-64741126D01* X145959397Y-64720827D01* X145959390Y-64720814D01* X145871789Y-64589711D01* @@ -9843,184 +9725,237 @@ X144540602Y-64720827D01* X144480264Y-64866498D01* X144480261Y-64866510D01* X144449500Y-65021153D01* -X120250500Y-65021153D01* -X120250500Y-62921153D01* -X121199500Y-62921153D01* -X121199500Y-63078846D01* -X121230261Y-63233489D01* -X121230264Y-63233501D01* -X121290602Y-63379172D01* -X121290609Y-63379185D01* -X121378210Y-63510288D01* -X121378213Y-63510292D01* -X121489707Y-63621786D01* -X121489711Y-63621789D01* -X121620814Y-63709390D01* -X121620827Y-63709397D01* -X121766498Y-63769735D01* -X121766503Y-63769737D01* -X121921153Y-63800499D01* -X121921156Y-63800500D01* -X121921158Y-63800500D01* -X122078844Y-63800500D01* -X122078845Y-63800499D01* -X122233497Y-63769737D01* -X122346166Y-63723067D01* -X122379172Y-63709397D01* -X122379172Y-63709396D01* -X122379179Y-63709394D01* -X122510289Y-63621789D01* -X122621789Y-63510289D01* -X122709394Y-63379179D01* -X122712854Y-63370827D01* -X122767163Y-63239711D01* -X122769737Y-63233497D01* -X122800500Y-63078842D01* -X122800500Y-62921158D01* -X122800500Y-62921155D01* -X122800499Y-62921153D01* -X122787391Y-62855255D01* -X122769737Y-62766503D01* -X122731420Y-62673996D01* -X122709397Y-62620827D01* -X122709392Y-62620818D01* -X122707304Y-62617693D01* -X122706712Y-62615804D01* -X122706521Y-62615446D01* -X122706589Y-62615409D01* -X122686425Y-62551016D01* -X122704908Y-62483636D01* -X122756886Y-62436944D01* -X122786213Y-62427183D01* -X122804328Y-62423580D01* -X122931811Y-62370775D01* -X123046542Y-62294114D01* -X123144114Y-62196542D01* -X123220775Y-62081811D01* -X123273580Y-61954328D01* -X123285817Y-61892809D01* -X123300500Y-61818995D01* -X126149499Y-61818995D01* -X126176418Y-61954322D01* -X126176421Y-61954332D01* -X126229221Y-62081804D01* -X126229228Y-62081817D01* -X126305885Y-62196541D01* -X126305888Y-62196545D01* -X126403454Y-62294111D01* -X126403458Y-62294114D01* -X126518182Y-62370771D01* -X126518195Y-62370778D01* -X126645667Y-62423578D01* -X126645672Y-62423580D01* -X126645676Y-62423580D01* -X126645677Y-62423581D01* -X126781004Y-62450500D01* -X126781007Y-62450500D01* -X126918995Y-62450500D01* -X127010041Y-62432389D01* -X127054328Y-62423580D01* -X127181811Y-62370775D01* -X127296542Y-62294114D01* -X127394114Y-62196542D01* -X127470775Y-62081811D01* -X127523580Y-61954328D01* -X127535817Y-61892809D01* -X127550500Y-61818995D01* -X127550500Y-61681004D01* -X127523581Y-61545677D01* -X127523580Y-61545676D01* -X127523580Y-61545672D01* -X127523578Y-61545667D01* -X127470778Y-61418195D01* -X127470771Y-61418182D01* -X127394114Y-61303458D01* -X127394111Y-61303454D01* -X127296545Y-61205888D01* -X127296541Y-61205885D01* -X127181817Y-61129228D01* -X127181804Y-61129221D01* -X127054332Y-61076421D01* -X127054322Y-61076418D01* -X126918995Y-61049500D01* -X126918993Y-61049500D01* -X126781007Y-61049500D01* -X126781005Y-61049500D01* -X126645677Y-61076418D01* -X126645667Y-61076421D01* -X126518195Y-61129221D01* -X126518182Y-61129228D01* -X126403458Y-61205885D01* -X126403454Y-61205888D01* -X126305888Y-61303454D01* -X126305885Y-61303458D01* -X126229228Y-61418182D01* -X126229221Y-61418195D01* -X126176421Y-61545667D01* -X126176418Y-61545677D01* -X126149500Y-61681004D01* -X126149500Y-61681007D01* -X126149500Y-61818993D01* -X126149500Y-61818995D01* -X126149499Y-61818995D01* -X123300500Y-61818995D01* -X123300500Y-61681004D01* -X123273581Y-61545677D01* -X123273580Y-61545676D01* -X123273580Y-61545672D01* -X123273578Y-61545667D01* -X123220778Y-61418195D01* -X123220771Y-61418182D01* -X123144114Y-61303458D01* -X123144111Y-61303454D01* -X123046545Y-61205888D01* -X123046541Y-61205885D01* -X122931817Y-61129228D01* -X122931804Y-61129221D01* -X122804332Y-61076421D01* -X122804322Y-61076418D01* -X122668995Y-61049500D01* -X122668993Y-61049500D01* -X122531007Y-61049500D01* -X122531005Y-61049500D01* -X122395677Y-61076418D01* -X122395667Y-61076421D01* -X122268195Y-61129221D01* -X122268182Y-61129228D01* -X122153458Y-61205885D01* -X122153454Y-61205888D01* -X122055888Y-61303454D01* -X122055885Y-61303458D01* -X121979228Y-61418182D01* -X121979221Y-61418195D01* -X121926421Y-61545667D01* -X121926418Y-61545677D01* -X121899500Y-61681004D01* -X121899500Y-61681007D01* -X121899500Y-61818993D01* -X121899500Y-61818995D01* -X121899499Y-61818995D01* -X121926418Y-61954322D01* -X121926420Y-61954328D01* -X121962021Y-62040276D01* -X121969490Y-62109746D01* -X121938215Y-62172225D01* -X121878126Y-62207877D01* -X121871653Y-62209346D01* -X121766507Y-62230262D01* -X121766498Y-62230264D01* -X121620827Y-62290602D01* -X121620814Y-62290609D01* -X121489711Y-62378210D01* -X121489707Y-62378213D01* -X121378213Y-62489707D01* -X121378210Y-62489711D01* -X121290609Y-62620814D01* -X121290602Y-62620827D01* -X121230264Y-62766498D01* -X121230261Y-62766510D01* -X121199500Y-62921153D01* -X120250500Y-62921153D01* +X131533429Y-65021153D01* +X131537929Y-65010289D01* +X131555603Y-64967621D01* +X131555605Y-64967614D01* +X131569737Y-64933497D01* +X131600500Y-64778842D01* +X131600500Y-64621158D01* +X131600500Y-64621155D01* +X131600499Y-64621153D01* +X131592083Y-64578842D01* +X131569737Y-64466503D01* +X131550955Y-64421158D01* +X131509397Y-64320827D01* +X131509390Y-64320814D01* +X131421789Y-64189711D01* +X131421786Y-64189707D01* +X131310292Y-64078213D01* +X131310288Y-64078210D01* +X131179185Y-63990609D01* +X131179172Y-63990602D01* +X131033501Y-63930264D01* +X131033489Y-63930261D01* +X130878845Y-63899500D01* +X130878842Y-63899500D01* +X130721158Y-63899500D01* +X130721155Y-63899500D01* +X130566510Y-63930261D01* +X130566498Y-63930264D01* +X130420827Y-63990602D01* +X130420814Y-63990609D01* +X130289711Y-64078210D01* +X130289707Y-64078213D01* +X130178213Y-64189707D01* +X130178210Y-64189711D01* +X130090609Y-64320814D01* +X130090602Y-64320827D01* +X130030264Y-64466498D01* +X130030261Y-64466510D01* +X129999500Y-64621153D01* +X123992084Y-64621153D01* +X123998107Y-64590875D01* +X123998107Y-64590874D01* +X124000500Y-64578844D01* +X124000500Y-64421155D01* +X124000499Y-64421153D01* +X123980543Y-64320827D01* +X123969737Y-64266503D01* +X123937929Y-64189711D01* +X123909397Y-64120827D01* +X123909390Y-64120814D01* +X123821789Y-63989711D01* +X123821786Y-63989707D01* +X123710292Y-63878213D01* +X123710288Y-63878210D01* +X123579185Y-63790609D01* +X123579172Y-63790602D01* +X123433501Y-63730264D01* +X123433489Y-63730261D01* +X123278845Y-63699500D01* +X123278842Y-63699500D01* +X123121158Y-63699500D01* +X123121155Y-63699500D01* +X122966510Y-63730261D01* +X122966498Y-63730264D01* +X122820827Y-63790602D01* +X122820814Y-63790609D01* +X122689711Y-63878210D01* +X122668817Y-63899104D01* +X122607493Y-63932588D01* +X122537801Y-63927602D01* +X122481868Y-63885729D01* +X122466580Y-63858883D01* +X122409394Y-63720821D01* +X122409392Y-63720818D01* +X122409390Y-63720814D01* +X122321789Y-63589711D01* +X122321786Y-63589707D01* +X122210292Y-63478213D01* +X122210288Y-63478210D01* +X122079185Y-63390609D01* +X122079172Y-63390602D01* +X121933501Y-63330264D01* +X121933489Y-63330261D01* +X121778845Y-63299500D01* +X121778842Y-63299500D01* +X121621158Y-63299500D01* +X121621155Y-63299500D01* +X121466510Y-63330261D01* +X121466498Y-63330264D01* +X121320827Y-63390602D01* +X121320814Y-63390609D01* +X121189711Y-63478210D01* +X121189707Y-63478213D01* +X121078213Y-63589707D01* +X121078210Y-63589711D01* +X120990609Y-63720814D01* +X120990602Y-63720827D01* +X120930264Y-63866498D01* +X120930261Y-63866510D01* +X120899500Y-64021153D01* +X120250500Y-64021153D01* +X120250500Y-61818995D01* +X120824499Y-61818995D01* +X120851418Y-61954322D01* +X120851421Y-61954332D01* +X120904221Y-62081804D01* +X120904228Y-62081817D01* +X120980885Y-62196541D01* +X120980888Y-62196545D01* +X121078454Y-62294111D01* +X121078458Y-62294114D01* +X121193182Y-62370771D01* +X121193195Y-62370778D01* +X121320667Y-62423578D01* +X121320672Y-62423580D01* +X121320676Y-62423580D01* +X121320677Y-62423581D01* +X121456004Y-62450500D01* +X121456007Y-62450500D01* +X121593995Y-62450500D01* +X121685041Y-62432389D01* +X121729328Y-62423580D01* +X121856811Y-62370775D01* +X121971542Y-62294114D01* +X122069114Y-62196542D01* +X122145775Y-62081811D01* +X122198580Y-61954328D01* +X122225500Y-61818995D01* +X125074499Y-61818995D01* +X125101418Y-61954322D01* +X125101421Y-61954332D01* +X125154221Y-62081804D01* +X125154228Y-62081817D01* +X125230885Y-62196541D01* +X125230888Y-62196545D01* +X125328454Y-62294111D01* +X125328458Y-62294114D01* +X125443182Y-62370771D01* +X125443195Y-62370778D01* +X125570667Y-62423578D01* +X125570672Y-62423580D01* +X125570676Y-62423580D01* +X125570677Y-62423581D01* +X125706004Y-62450500D01* +X125706007Y-62450500D01* +X125843995Y-62450500D01* +X125935041Y-62432389D01* +X125979328Y-62423580D01* +X126106811Y-62370775D01* +X126221542Y-62294114D01* +X126319114Y-62196542D01* +X126395775Y-62081811D01* +X126448580Y-61954328D01* +X126475500Y-61818993D01* +X126475500Y-61681007D01* +X126475500Y-61681004D01* +X126448581Y-61545677D01* +X126448580Y-61545676D01* +X126448580Y-61545672D01* +X126448578Y-61545667D01* +X126395778Y-61418195D01* +X126395771Y-61418182D01* +X126319114Y-61303458D01* +X126319111Y-61303454D01* +X126221545Y-61205888D01* +X126221541Y-61205885D01* +X126106817Y-61129228D01* +X126106804Y-61129221D01* +X125979332Y-61076421D01* +X125979322Y-61076418D01* +X125843995Y-61049500D01* +X125843993Y-61049500D01* +X125706007Y-61049500D01* +X125706005Y-61049500D01* +X125570677Y-61076418D01* +X125570667Y-61076421D01* +X125443195Y-61129221D01* +X125443182Y-61129228D01* +X125328458Y-61205885D01* +X125328454Y-61205888D01* +X125230888Y-61303454D01* +X125230885Y-61303458D01* +X125154228Y-61418182D01* +X125154221Y-61418195D01* +X125101421Y-61545667D01* +X125101418Y-61545677D01* +X125074500Y-61681004D01* +X125074500Y-61681007D01* +X125074500Y-61818993D01* +X125074500Y-61818995D01* +X125074499Y-61818995D01* +X122225500Y-61818995D01* +X122225500Y-61818993D01* +X122225500Y-61681007D01* +X122225500Y-61681004D01* +X122198581Y-61545677D01* +X122198580Y-61545676D01* +X122198580Y-61545672D01* +X122198578Y-61545667D01* +X122145778Y-61418195D01* +X122145771Y-61418182D01* +X122069114Y-61303458D01* +X122069111Y-61303454D01* +X121971545Y-61205888D01* +X121971541Y-61205885D01* +X121856817Y-61129228D01* +X121856804Y-61129221D01* +X121729332Y-61076421D01* +X121729322Y-61076418D01* +X121593995Y-61049500D01* +X121593993Y-61049500D01* +X121456007Y-61049500D01* +X121456005Y-61049500D01* +X121320677Y-61076418D01* +X121320667Y-61076421D01* +X121193195Y-61129221D01* +X121193182Y-61129228D01* +X121078458Y-61205885D01* +X121078454Y-61205888D01* +X120980888Y-61303454D01* +X120980885Y-61303458D01* +X120904228Y-61418182D01* +X120904221Y-61418195D01* +X120851421Y-61545667D01* +X120851418Y-61545677D01* +X120824500Y-61681004D01* +X120824500Y-61681007D01* +X120824500Y-61818993D01* +X120824500Y-61818995D01* +X120824499Y-61818995D01* +X120250500Y-61818995D01* X120250500Y-60374500D01* X120270185Y-60307461D01* X120322989Y-60261706D01* diff --git a/PCB/production/gerbers/snips_controller-In2_Cu.gbr b/PCB/production/gerbers/snips_controller-In2_Cu.gbr index f86eb7d..dc4ee1d 100644 --- a/PCB/production/gerbers/snips_controller-In2_Cu.gbr +++ b/PCB/production/gerbers/snips_controller-In2_Cu.gbr @@ -1,12 +1,12 @@ %TF.GenerationSoftware,KiCad,Pcbnew,10.0.5*% -%TF.CreationDate,2026-10-25T21:30:58-07:00*% +%TF.CreationDate,2026-10-29T18:08:56-07:00*% %TF.ProjectId,snips_controller,736e6970-735f-4636-9f6e-74726f6c6c65,rev?*% %TF.SameCoordinates,Original*% %TF.FileFunction,Copper,L3,Inr*% %TF.FilePolarity,Positive*% %FSLAX46Y46*% G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* -G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-25 21:30:58* +G04 Created by KiCad (PCBNEW 10.0.5) date 2026-10-29 18:08:56* %MOMM*% %LPD*% G01* @@ -56,14 +56,8 @@ G04 Aperture macros list end* %TA.AperFunction,ComponentPad*% %ADD18C,0.300000*% %TD*% -%TA.AperFunction,ComponentPad*% -%ADD19R,1.050000X1.500000*% -%TD*% -%TA.AperFunction,ComponentPad*% -%ADD20O,1.050000X1.500000*% -%TD*% %TA.AperFunction,ViaPad*% -%ADD21C,0.600000*% +%ADD19C,0.600000*% %TD*% G04 APERTURE END LIST* D10* @@ -159,35 +153,26 @@ X133000000Y-119500000D03* %TD*% D19* %TO.N,3V3*% -%TO.C,U_HALL1*% -X152700000Y-63000000D03* -D20* -%TO.N,GND*% -X151430000Y-63000000D03* -%TO.N,/Hall_Trigger/TRIG_ANALOG*% -X150160000Y-63000000D03* -%TD*% -D21* -%TO.N,3V3*% +X140900000Y-72900000D03* X139342332Y-122557668D03* X122500000Y-107500000D03* X127110000Y-120400000D03* X151500000Y-153000000D03* +X122600000Y-86300000D03* X135500000Y-88000000D03* X149550000Y-132950000D03* X148000000Y-91500000D03* X142800000Y-79400000D03* X138600000Y-146500000D03* -X130750000Y-65000000D03* +X130800000Y-65900000D03* X137400000Y-79200000D03* -X126200000Y-78000000D03* X147500000Y-83000000D03* X140000000Y-75450000D03* %TO.N,XBEE_SLEEP_RQ*% X145400000Y-70950000D03* X131100000Y-87350000D03* %TO.N,GND*% -X121500000Y-67000000D03* +X123200000Y-64500000D03* X142500000Y-121250000D03* X133020634Y-117700000D03* X147500000Y-119000000D03* @@ -198,7 +183,7 @@ X138800000Y-75600000D03* X147500000Y-96500000D03* X126000000Y-153000000D03* X125000000Y-118000000D03* -X130750000Y-63750000D03* +X130800000Y-64700000D03* X121500000Y-112000000D03* X124000000Y-129000000D03* X128750000Y-121250000D03* @@ -207,7 +192,7 @@ X152750000Y-112500000D03* X133020634Y-120500000D03* X131050000Y-111200000D03* X135000000Y-104000000D03* -X124088235Y-90338235D03* +X124088235Y-90513235D03* X128000000Y-105500000D03* X139500000Y-118500000D03* X149800000Y-150800000D03* @@ -217,11 +202,11 @@ X145000000Y-123500000D03* X145250000Y-65100000D03* X123500000Y-124000000D03* X123500000Y-115500000D03* -X124400000Y-84800000D03* +X140700000Y-71800000D03* X152500000Y-121250000D03* +X124400000Y-88000000D03* X145800000Y-153300000D03* X150500000Y-90500000D03* -X139250000Y-73750000D03* X129000000Y-119000000D03* X150500000Y-100500000D03* X143600000Y-77200000D03* @@ -241,6 +226,9 @@ X128574265Y-102574265D03* %TO.N,/Buttons_Direct/BTN_MACRO2*% X143500000Y-84500000D03* X135816422Y-93425941D03* +%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% +X126700000Y-76900000D03* +X121700000Y-64100000D03* %TO.N,/Buttons_Direct/BTN_MACRO5*% X144000000Y-87000000D03* X133500000Y-116400000D03* @@ -252,20 +240,17 @@ X145000000Y-77000000D03* %TO.N,/Buttons_Direct/BTN_MACRO3*% X145500000Y-80500000D03* X145000000Y-109500000D03* -%TO.N,/Buttons_Direct/BTN_TRIG_DIG*% -X127200000Y-75000000D03* -X122000000Y-63000000D03* %TO.N,/Hall_Trigger/TRIG_ANALOG*% -X130800000Y-67800000D03* +X133950000Y-70900000D03* %TO.N,/MCU_Core/STICK_X*% X137500000Y-81000000D03* %TO.N,/MCU_Core/STICK_Y*% X134800000Y-80752983D03* %TO.N,/MCU_Core/VSYS_SENSE*% -X123900000Y-71100000D03* -X127500000Y-71300000D03* +X125700000Y-73500000D03* +X126758949Y-84000000D03* %TO.N,/Buttons_Direct/BTN_THR_UP*% -X125250000Y-90500000D03* +X125900000Y-90500000D03* X128000000Y-75500000D03* %TO.N,/Buttons_Direct/BTN_THR_DN*% X125340812Y-100424593D03* @@ -275,9 +260,9 @@ X133350000Y-76350000D03* %TO.N,ACCEL_INT1*% X133400000Y-80400000D03* %TO.N,/Accelerometer/I2C_SCL*% -X125374880Y-71699999D03* -X133350000Y-77150003D03* -X130900000Y-76950000D03* +X130950000Y-77200000D03* +X127624265Y-74175735D03* +X133350000Y-78800000D03* %TO.N,/MCU_Core/BTN_STICK*% X141300000Y-98800000D03* %TO.N,/Buttons_Direct/BTN_MACRO1*% @@ -312,7 +297,7 @@ X148544265Y-73955735D03* X125307179Y-152600000D03* X154400000Y-85000000D03* %TO.N,/MCU_Core/STAT1*% -X133250000Y-71850000D03* +X133350000Y-70000000D03* X128100000Y-103700000D03* X126624265Y-119724265D03* %TO.N,VBUS*% @@ -320,7 +305,7 @@ X135470098Y-154243783D03* X139556798Y-154232791D03* %TO.N,VSYS*% X142200000Y-119500000D03* -X124600000Y-88100000D03* +X124659759Y-89061229D03* X136200000Y-116100000D03* X143600000Y-124150000D03* X136275000Y-108200000D03* @@ -341,145 +326,136 @@ X128988794Y-60322989D01* X129000000Y-60374500D01* X129000000Y-63110000D01* X147000000Y-63110000D01* -X147000000Y-62673992D01* -X149134500Y-62673992D01* -X149134500Y-63326007D01* -X149173907Y-63524119D01* -X149173909Y-63524127D01* -X149251212Y-63710752D01* -X149251217Y-63710762D01* -X149363441Y-63878718D01* -X149506281Y-64021558D01* -X149674237Y-64133782D01* -X149674241Y-64133784D01* -X149674244Y-64133786D01* -X149860873Y-64211091D01* -X150026777Y-64244091D01* -X150058992Y-64250499D01* -X150058996Y-64250500D01* -X150058997Y-64250500D01* -X150261004Y-64250500D01* -X150261005Y-64250499D01* -X150459127Y-64211091D01* -X150645756Y-64133786D01* -X150726562Y-64079792D01* -X150793234Y-64058917D01* -X150860614Y-64077401D01* -X150864340Y-64079795D01* -X150944479Y-64133343D01* -X150944486Y-64133347D01* -X151131016Y-64210609D01* -X151131025Y-64210612D01* -X151180000Y-64220353D01* -X151180000Y-63365865D01* -X151182383Y-63341671D01* -X151185500Y-63326002D01* -X151185500Y-63285830D01* -X151199745Y-63300075D01* -X151285255Y-63349444D01* -X151380630Y-63375000D01* -X151479370Y-63375000D01* -X151574745Y-63349444D01* -X151660255Y-63300075D01* -X151674501Y-63285829D01* -X151674501Y-63797874D01* -X151679290Y-63842421D01* -X151680000Y-63855675D01* -X151680000Y-64220352D01* -X151728974Y-64210611D01* -X151728978Y-64210610D01* -X151809333Y-64177326D01* -X151878802Y-64169857D01* -X151924725Y-64189845D01* -X151924888Y-64189547D01* -X151928220Y-64191366D01* -X151931095Y-64192618D01* -X151932668Y-64193795D01* -X151932670Y-64193797D01* -X152067517Y-64244091D01* -X152067516Y-64244091D01* -X152074444Y-64244835D01* -X152127127Y-64250500D01* -X153272872Y-64250499D01* -X153332483Y-64244091D01* -X153467331Y-64193796D01* -X153582546Y-64107546D01* -X153668796Y-63992331D01* -X153719091Y-63857483D01* -X153725500Y-63797873D01* -X153725499Y-62202128D01* -X153719091Y-62142517D01* -X153711170Y-62121281D01* -X153668797Y-62007671D01* -X153668793Y-62007664D01* -X153582547Y-61892455D01* -X153582544Y-61892452D01* -X153467335Y-61806206D01* -X153467328Y-61806202D01* -X153332482Y-61755908D01* -X153332483Y-61755908D01* -X153272883Y-61749501D01* -X153272881Y-61749500D01* -X153272873Y-61749500D01* -X153272864Y-61749500D01* -X152127129Y-61749500D01* -X152127123Y-61749501D01* -X152067516Y-61755908D01* -X151932671Y-61806202D01* -X151932666Y-61806205D01* -X151931096Y-61807381D01* -X151929258Y-61808066D01* -X151924886Y-61810454D01* -X151924542Y-61809825D01* -X151865631Y-61831796D01* -X151809336Y-61822673D01* -X151728984Y-61789390D01* -X151728977Y-61789388D01* -X151680000Y-61779645D01* -X151680000Y-62144329D01* -X151679289Y-62157584D01* -X151674500Y-62202127D01* -X151674500Y-62714170D01* -X151660255Y-62699925D01* -X151574745Y-62650556D01* -X151479370Y-62625000D01* -X151380630Y-62625000D01* -X151285255Y-62650556D01* -X151199745Y-62699925D01* -X151185500Y-62714170D01* -X151185500Y-62673996D01* -X151185499Y-62673995D01* -X151182383Y-62658326D01* -X151180000Y-62634134D01* -X151180000Y-61779646D01* -X151179999Y-61779645D01* -X151131022Y-61789388D01* -X151131015Y-61789390D01* -X150944481Y-61866654D01* -X150944479Y-61866655D01* -X150864337Y-61920204D01* -X150797660Y-61941081D01* -X150730280Y-61922596D01* -X150726558Y-61920204D01* -X150645754Y-61866212D01* -X150459127Y-61788909D01* -X150459119Y-61788907D01* -X150261007Y-61749500D01* -X150261003Y-61749500D01* -X150058997Y-61749500D01* -X150058992Y-61749500D01* -X149860880Y-61788907D01* -X149860872Y-61788909D01* -X149674247Y-61866212D01* -X149674237Y-61866217D01* -X149506281Y-61978441D01* -X149363441Y-62121281D01* -X149251217Y-62289237D01* -X149251212Y-62289247D01* -X149173909Y-62475872D01* -X149173907Y-62475880D01* -X149134500Y-62673992D01* -X147000000Y-62673992D01* +X147000000Y-61818995D01* +X148524499Y-61818995D01* +X148551418Y-61954322D01* +X148551421Y-61954332D01* +X148604221Y-62081804D01* +X148604228Y-62081817D01* +X148680885Y-62196541D01* +X148680888Y-62196545D01* +X148778454Y-62294111D01* +X148778458Y-62294114D01* +X148893182Y-62370771D01* +X148893195Y-62370778D01* +X149020667Y-62423578D01* +X149020672Y-62423580D01* +X149020676Y-62423580D01* +X149020677Y-62423581D01* +X149156004Y-62450500D01* +X149156007Y-62450500D01* +X149293995Y-62450500D01* +X149385041Y-62432389D01* +X149429328Y-62423580D01* +X149556811Y-62370775D01* +X149671542Y-62294114D01* +X149769114Y-62196542D01* +X149845775Y-62081811D01* +X149898580Y-61954328D01* +X149925500Y-61818995D01* +X152774499Y-61818995D01* +X152801418Y-61954322D01* +X152801421Y-61954332D01* +X152854221Y-62081804D01* +X152854228Y-62081817D01* +X152930885Y-62196541D01* +X152930888Y-62196545D01* +X153028454Y-62294111D01* +X153028458Y-62294114D01* +X153143182Y-62370771D01* +X153143195Y-62370778D01* +X153270667Y-62423578D01* +X153270672Y-62423580D01* +X153270676Y-62423580D01* +X153270677Y-62423581D01* +X153406004Y-62450500D01* +X153406007Y-62450500D01* +X153543995Y-62450500D01* +X153635041Y-62432389D01* +X153679328Y-62423580D01* +X153806811Y-62370775D01* +X153921542Y-62294114D01* +X154019114Y-62196542D01* +X154095775Y-62081811D01* +X154148580Y-61954328D01* +X154175500Y-61818993D01* +X154175500Y-61681007D01* +X154175500Y-61681004D01* +X154148581Y-61545677D01* +X154148580Y-61545676D01* +X154148580Y-61545672D01* +X154148578Y-61545667D01* +X154095778Y-61418195D01* +X154095771Y-61418182D01* +X154019114Y-61303458D01* +X154019111Y-61303454D01* +X153921545Y-61205888D01* +X153921541Y-61205885D01* +X153806817Y-61129228D01* +X153806804Y-61129221D01* +X153679332Y-61076421D01* +X153679322Y-61076418D01* +X153543995Y-61049500D01* +X153543993Y-61049500D01* +X153406007Y-61049500D01* +X153406005Y-61049500D01* +X153270677Y-61076418D01* +X153270667Y-61076421D01* +X153143195Y-61129221D01* +X153143182Y-61129228D01* +X153028458Y-61205885D01* +X153028454Y-61205888D01* +X152930888Y-61303454D01* +X152930885Y-61303458D01* +X152854228Y-61418182D01* +X152854221Y-61418195D01* +X152801421Y-61545667D01* +X152801418Y-61545677D01* +X152774500Y-61681004D01* +X152774500Y-61681007D01* +X152774500Y-61818993D01* +X152774500Y-61818995D01* +X152774499Y-61818995D01* +X149925500Y-61818995D01* +X149925500Y-61818993D01* +X149925500Y-61681007D01* +X149925500Y-61681004D01* +X149898581Y-61545677D01* +X149898580Y-61545676D01* +X149898580Y-61545672D01* +X149898578Y-61545667D01* +X149845778Y-61418195D01* +X149845771Y-61418182D01* +X149769114Y-61303458D01* +X149769111Y-61303454D01* +X149671545Y-61205888D01* +X149671541Y-61205885D01* +X149556817Y-61129228D01* +X149556804Y-61129221D01* +X149429332Y-61076421D01* +X149429322Y-61076418D01* +X149293995Y-61049500D01* +X149293993Y-61049500D01* +X149156007Y-61049500D01* +X149156005Y-61049500D01* +X149020677Y-61076418D01* +X149020667Y-61076421D01* +X148893195Y-61129221D01* +X148893182Y-61129228D01* +X148778458Y-61205885D01* +X148778454Y-61205888D01* +X148680888Y-61303454D01* +X148680885Y-61303458D01* +X148604228Y-61418182D01* +X148604221Y-61418195D01* +X148551421Y-61545667D01* +X148551418Y-61545677D01* +X148524500Y-61681004D01* +X148524500Y-61681007D01* +X148524500Y-61818993D01* +X148524500Y-61818995D01* +X148524499Y-61818995D01* +X147000000Y-61818995D01* X147000000Y-60374500D01* X147019685Y-60307461D01* X147072489Y-60261706D01* @@ -5068,7 +5044,7 @@ X145420819Y-89463039D01* X145420811Y-89463023D01* X145304446Y-89261475D01* X145304442Y-89261468D01* -X145163824Y-89078211D01* +X145211294Y-89140075D01* X145162757Y-89076820D01* X145162751Y-89076813D01* X144998186Y-88912248D01* @@ -5738,41 +5714,41 @@ X121049500Y-92693995D01* X121049499Y-92693995D01* X120250500Y-92693995D01* X120250500Y-90421153D01* -X124449500Y-90421153D01* -X124449500Y-90578846D01* -X124480261Y-90733489D01* -X124480264Y-90733501D01* -X124540602Y-90879172D01* -X124540609Y-90879185D01* -X124628210Y-91010288D01* -X124628213Y-91010292D01* -X124739707Y-91121786D01* -X124739711Y-91121789D01* -X124870814Y-91209390D01* -X124870827Y-91209397D01* -X124965630Y-91248665D01* -X125016503Y-91269737D01* -X125140235Y-91294349D01* -X125171153Y-91300499D01* -X125171156Y-91300500D01* -X125171158Y-91300500D01* -X125328844Y-91300500D01* -X125328845Y-91300499D01* -X125483497Y-91269737D01* -X125629179Y-91209394D01* -X125760289Y-91121789D01* -X125871789Y-91010289D01* -X125959394Y-90879179D01* -X126019737Y-90733497D01* -X126050500Y-90578842D01* -X126050500Y-90421158D01* -X126050500Y-90421155D01* -X126050499Y-90421153D01* -X126042669Y-90381789D01* -X126019737Y-90266503D01* -X126002174Y-90224101D01* -X125982673Y-90177021D01* -X125964702Y-90133634D01* +X125099500Y-90421153D01* +X125099500Y-90578846D01* +X125130261Y-90733489D01* +X125130264Y-90733501D01* +X125190602Y-90879172D01* +X125190609Y-90879185D01* +X125278210Y-91010288D01* +X125278213Y-91010292D01* +X125389707Y-91121786D01* +X125389711Y-91121789D01* +X125520814Y-91209390D01* +X125520827Y-91209397D01* +X125615630Y-91248665D01* +X125666503Y-91269737D01* +X125790235Y-91294349D01* +X125821153Y-91300499D01* +X125821156Y-91300500D01* +X125821158Y-91300500D01* +X125978844Y-91300500D01* +X125978845Y-91300499D01* +X126133497Y-91269737D01* +X126279179Y-91209394D01* +X126410289Y-91121789D01* +X126521789Y-91010289D01* +X126609394Y-90879179D01* +X126669737Y-90733497D01* +X126700500Y-90578842D01* +X126700500Y-90421158D01* +X126700500Y-90421155D01* +X126700499Y-90421153D01* +X126692669Y-90381789D01* +X126669737Y-90266503D01* +X126652174Y-90224101D01* +X126632673Y-90177021D01* +X126614702Y-90133634D01* X129399500Y-90133634D01* X129399500Y-90366365D01* X129399501Y-90366382D01* @@ -5825,7 +5801,7 @@ X132770819Y-89463039D01* X132770811Y-89463023D01* X132654446Y-89261475D01* X132654442Y-89261468D01* -X132513824Y-89078211D01* +X132561294Y-89140075D01* X132512757Y-89076820D01* X132512751Y-89076813D01* X132348186Y-88912248D01* @@ -5866,34 +5842,34 @@ X129490120Y-89678052D01* X129429878Y-89902877D01* X129399501Y-90133617D01* X129399500Y-90133634D01* -X125964702Y-90133634D01* -X125959397Y-90120827D01* -X125959390Y-90120814D01* -X125871789Y-89989711D01* -X125871786Y-89989707D01* -X125760292Y-89878213D01* -X125760288Y-89878210D01* -X125629185Y-89790609D01* -X125629172Y-89790602D01* -X125483501Y-89730264D01* -X125483489Y-89730261D01* -X125328845Y-89699500D01* -X125328842Y-89699500D01* -X125171158Y-89699500D01* -X125171155Y-89699500D01* -X125016510Y-89730261D01* -X125016498Y-89730264D01* -X124870827Y-89790602D01* -X124870814Y-89790609D01* -X124739711Y-89878210D01* -X124739707Y-89878213D01* -X124628213Y-89989707D01* -X124628210Y-89989711D01* -X124540609Y-90120814D01* -X124540602Y-90120827D01* -X124480264Y-90266498D01* -X124480261Y-90266510D01* -X124449500Y-90421153D01* +X126614702Y-90133634D01* +X126609397Y-90120827D01* +X126609390Y-90120814D01* +X126521789Y-89989711D01* +X126521786Y-89989707D01* +X126410292Y-89878213D01* +X126410288Y-89878210D01* +X126279185Y-89790609D01* +X126279172Y-89790602D01* +X126133501Y-89730264D01* +X126133489Y-89730261D01* +X125978845Y-89699500D01* +X125978842Y-89699500D01* +X125821158Y-89699500D01* +X125821155Y-89699500D01* +X125666510Y-89730261D01* +X125666498Y-89730264D01* +X125520827Y-89790602D01* +X125520814Y-89790609D01* +X125389711Y-89878210D01* +X125389707Y-89878213D01* +X125278213Y-89989707D01* +X125278210Y-89989711D01* +X125190609Y-90120814D01* +X125190602Y-90120827D01* +X125130264Y-90266498D01* +X125130261Y-90266510D01* +X125099500Y-90421153D01* X120250500Y-90421153D01* X120250500Y-88443995D01* X121049499Y-88443995D01* @@ -5917,85 +5893,86 @@ X121818995Y-89075500D01* X121910041Y-89057389D01* X121954328Y-89048580D01* X122081811Y-88995775D01* +X122101855Y-88982382D01* +X123859259Y-88982382D01* +X123859259Y-89140075D01* +X123890020Y-89294718D01* +X123890023Y-89294730D01* +X123950361Y-89440401D01* +X123950368Y-89440414D01* +X124037969Y-89571517D01* +X124037972Y-89571521D01* +X124149466Y-89683015D01* +X124149470Y-89683018D01* +X124280573Y-89770619D01* +X124280586Y-89770626D01* +X124426257Y-89830964D01* +X124426262Y-89830966D01* +X124580912Y-89861728D01* +X124580915Y-89861729D01* +X124580917Y-89861729D01* +X124738603Y-89861729D01* +X124738604Y-89861728D01* +X124893256Y-89830966D01* +X125019091Y-89778844D01* +X125038931Y-89770626D01* +X125038931Y-89770625D01* +X125038938Y-89770623D01* +X125170048Y-89683018D01* +X125281548Y-89571518D01* +X125369153Y-89440408D01* +X125429496Y-89294726D01* +X125460259Y-89140071D01* +X125460259Y-88982387D01* +X125460259Y-88982384D01* +X125460258Y-88982382D01* +X125447673Y-88919114D01* +X125429496Y-88827732D01* +X125408984Y-88778211D01* +X125369156Y-88682056D01* +X125369149Y-88682043D01* +X125281548Y-88550940D01* +X125281545Y-88550936D01* +X125170051Y-88439442D01* +X125170047Y-88439439D01* +X125038944Y-88351838D01* +X125038931Y-88351831D01* +X124893260Y-88291493D01* +X124893248Y-88291490D01* +X124738604Y-88260729D01* +X124738601Y-88260729D01* +X124580917Y-88260729D01* +X124580914Y-88260729D01* +X124426269Y-88291490D01* +X124426257Y-88291493D01* +X124280586Y-88351831D01* +X124280573Y-88351838D01* +X124149470Y-88439439D01* +X124149466Y-88439442D01* +X124037972Y-88550936D01* +X124037969Y-88550940D01* +X123950368Y-88682043D01* +X123950361Y-88682056D01* +X123890023Y-88827727D01* +X123890020Y-88827739D01* +X123859259Y-88982382D01* +X122101855Y-88982382D01* X122196542Y-88919114D01* +X122203414Y-88912242D01* +X122227043Y-88888614D01* +X122294111Y-88821545D01* X122294114Y-88821542D01* X122370775Y-88706811D01* X122423580Y-88579328D01* -X122443501Y-88479179D01* -X122450500Y-88443995D01* +X122450500Y-88443993D01* +X122450500Y-88306007D01* X122450500Y-88306004D01* X122423581Y-88170677D01* X122423580Y-88170676D01* X122423580Y-88170672D01* X122402482Y-88119737D01* -X122378782Y-88062518D01* -X122370776Y-88043192D01* -X122370775Y-88043189D01* -X122370773Y-88043186D01* +X122370778Y-88043195D01* X122370771Y-88043182D01* -X122356052Y-88021153D01* -X123799500Y-88021153D01* -X123799500Y-88178846D01* -X123830261Y-88333489D01* -X123830264Y-88333501D01* -X123890602Y-88479172D01* -X123890609Y-88479185D01* -X123978210Y-88610288D01* -X123978213Y-88610292D01* -X124089707Y-88721786D01* -X124089711Y-88721789D01* -X124220814Y-88809390D01* -X124220827Y-88809397D01* -X124366498Y-88869735D01* -X124366503Y-88869737D01* -X124516131Y-88899500D01* -X124521153Y-88900499D01* -X124521156Y-88900500D01* -X124521158Y-88900500D01* -X124678844Y-88900500D01* -X124678845Y-88900499D01* -X124833497Y-88869737D01* -X124979179Y-88809394D01* -X125110289Y-88721789D01* -X125221789Y-88610289D01* -X125309394Y-88479179D01* -X125369737Y-88333497D01* -X125400500Y-88178842D01* -X125400500Y-88021158D01* -X125400500Y-88021155D01* -X125400499Y-88021153D01* -X125390679Y-87971786D01* -X125369737Y-87866503D01* -X125352431Y-87824723D01* -X125309397Y-87720827D01* -X125309390Y-87720814D01* -X125221789Y-87589711D01* -X125221786Y-87589707D01* -X125110292Y-87478213D01* -X125110288Y-87478210D01* -X124979185Y-87390609D01* -X124979173Y-87390602D01* -X124952674Y-87379627D01* -X124833501Y-87330264D01* -X124833489Y-87330261D01* -X124678845Y-87299500D01* -X124678842Y-87299500D01* -X124521158Y-87299500D01* -X124521155Y-87299500D01* -X124366510Y-87330261D01* -X124366498Y-87330264D01* -X124220827Y-87390602D01* -X124220814Y-87390609D01* -X124089711Y-87478210D01* -X124089707Y-87478213D01* -X123978213Y-87589707D01* -X123978210Y-87589711D01* -X123890609Y-87720814D01* -X123890602Y-87720827D01* -X123830264Y-87866498D01* -X123830261Y-87866510D01* -X123799500Y-88021153D01* -X122356052Y-88021153D01* X122294114Y-87928458D01* X122294111Y-87928454D01* X122196545Y-87830888D01* @@ -6051,8 +6028,6 @@ X131479179Y-88059394D01* X131610289Y-87971789D01* X131721789Y-87860289D01* X131809394Y-87729179D01* -X131812854Y-87720827D01* -X131839349Y-87656861D01* X131869737Y-87583497D01* X131900500Y-87428842D01* X131900500Y-87271158D01* @@ -6089,7 +6064,33 @@ X130330264Y-87116498D01* X130330261Y-87116510D01* X130299500Y-87271153D01* X120250500Y-87271153D01* -X120250500Y-86399941D01* +X120250500Y-86221153D01* +X121799500Y-86221153D01* +X121799500Y-86378846D01* +X121830261Y-86533489D01* +X121830264Y-86533501D01* +X121890602Y-86679172D01* +X121890609Y-86679185D01* +X121978210Y-86810288D01* +X121978213Y-86810292D01* +X122089707Y-86921786D01* +X122089711Y-86921789D01* +X122220814Y-87009390D01* +X122220827Y-87009397D01* +X122306782Y-87045000D01* +X122366503Y-87069737D01* +X122521153Y-87100499D01* +X122521156Y-87100500D01* +X122521158Y-87100500D01* +X122678844Y-87100500D01* +X122678845Y-87100499D01* +X122833497Y-87069737D01* +X122979179Y-87009394D01* +X123110289Y-86921789D01* +X123221789Y-86810289D01* +X123309394Y-86679179D01* +X123369737Y-86533497D01* +X123396303Y-86399941D01* X133474500Y-86399941D01* X133474500Y-86640058D01* X133512063Y-86877222D01* @@ -6184,7 +6185,7 @@ X141200500Y-89778842D01* X141200500Y-89621158D01* X141200500Y-89621155D01* X141200499Y-89621153D01* -X141172192Y-89478846D01* +X141194476Y-89590873D01* X141169737Y-89466503D01* X141109534Y-89321158D01* X141109397Y-89320827D01* @@ -6224,7 +6225,7 @@ X137100500Y-89321155D01* X137100499Y-89321153D01* X137074353Y-89189711D01* X137069737Y-89166503D01* -X137069735Y-89166498D01* +X137058790Y-89140075D01* X137009397Y-89020827D01* X137009390Y-89020814D01* X136921789Y-88889711D01* @@ -6267,8 +6268,8 @@ X153646542Y-88919114D01* X153744114Y-88821542D01* X153820775Y-88706811D01* X153873580Y-88579328D01* -X153893501Y-88479179D01* -X153900500Y-88443995D01* +X153900500Y-88443993D01* +X153900500Y-88306007D01* X153900500Y-88306004D01* X153873581Y-88170677D01* X153873580Y-88170676D01* @@ -6321,7 +6322,7 @@ X136453158Y-87636788D01* X136479479Y-87656861D01* X136506204Y-87683586D01* X136700464Y-87824724D01* -X136782473Y-87866510D01* +X136770262Y-87860288D01* X136914406Y-87933734D01* X136914408Y-87933734D01* X136914411Y-87933736D01* @@ -6387,9 +6388,6 @@ X143921158Y-87800500D01* X144078844Y-87800500D01* X144078845Y-87800499D01* X144233497Y-87769737D01* -X144351592Y-87720821D01* -X144379172Y-87709397D01* -X144379172Y-87709396D01* X144379179Y-87709394D01* X144510289Y-87621789D01* X144621789Y-87510289D01* @@ -6421,7 +6419,6 @@ X147120814Y-87209390D01* X147120827Y-87209397D01* X147266498Y-87269735D01* X147266503Y-87269737D01* -X147416131Y-87299500D01* X147421153Y-87300499D01* X147421156Y-87300500D01* X147421158Y-87300500D01* @@ -6661,8 +6658,67 @@ X133695276Y-85720463D01* X133586265Y-85934406D01* X133512063Y-86162777D01* X133474500Y-86399941D01* -X120250500Y-86399941D01* -X120250500Y-84421153D01* +X123396303Y-86399941D01* +X123400500Y-86378842D01* +X123400500Y-86221158D01* +X123400500Y-86221155D01* +X123400499Y-86221153D01* +X123396192Y-86199500D01* +X123369737Y-86066503D01* +X123369735Y-86066498D01* +X123309397Y-85920827D01* +X123309390Y-85920814D01* +X123221789Y-85789711D01* +X123221786Y-85789707D01* +X123110292Y-85678213D01* +X123110288Y-85678210D01* +X122979185Y-85590609D01* +X122979172Y-85590602D01* +X122833501Y-85530264D01* +X122833489Y-85530261D01* +X122678845Y-85499500D01* +X122678842Y-85499500D01* +X122521158Y-85499500D01* +X122521155Y-85499500D01* +X122366510Y-85530261D01* +X122366498Y-85530264D01* +X122220827Y-85590602D01* +X122220814Y-85590609D01* +X122089711Y-85678210D01* +X122089707Y-85678213D01* +X121978213Y-85789707D01* +X121978210Y-85789711D01* +X121890609Y-85920814D01* +X121890602Y-85920827D01* +X121830264Y-86066498D01* +X121830261Y-86066510D01* +X121799500Y-86221153D01* +X120250500Y-86221153D01* +X120250500Y-83921153D01* +X125958449Y-83921153D01* +X125958449Y-84078846D01* +X125989210Y-84233489D01* +X125989213Y-84233501D01* +X126049551Y-84379172D01* +X126049558Y-84379185D01* +X126137159Y-84510288D01* +X126137162Y-84510292D01* +X126248656Y-84621786D01* +X126248660Y-84621789D01* +X126379763Y-84709390D01* +X126379776Y-84709397D01* +X126517632Y-84766498D01* +X126525452Y-84769737D01* +X126680102Y-84800499D01* +X126680105Y-84800500D01* +X126680107Y-84800500D01* +X126837793Y-84800500D01* +X126837794Y-84800499D01* +X126992446Y-84769737D01* +X127138128Y-84709394D01* +X127269238Y-84621789D01* +X127380738Y-84510289D01* +X127440297Y-84421153D01* X141199500Y-84421153D01* X141199500Y-84578846D01* X141230261Y-84733489D01* @@ -6727,7 +6783,7 @@ X144300500Y-84421155D01* X144300499Y-84421153D01* X144274531Y-84290606D01* X144269737Y-84266503D01* -X144269735Y-84266498D01* +X144256062Y-84233489D01* X144209397Y-84120827D01* X144209390Y-84120814D01* X144121789Y-83989711D01* @@ -6778,33 +6834,45 @@ X141290602Y-84120827D01* X141230264Y-84266498D01* X141230261Y-84266510D01* X141199500Y-84421153D01* -X120250500Y-84421153D01* -X120250500Y-81274038D01* -X121799500Y-81274038D01* -X121799500Y-81525962D01* -X121838110Y-81769735D01* -X121838910Y-81774785D01* -X121916760Y-82014383D01* -X121995413Y-82168747D01* -X122026757Y-82230263D01* -X122031132Y-82238848D01* -X122179201Y-82442649D01* -X122179205Y-82442654D01* -X122357345Y-82620794D01* -X122357350Y-82620798D01* -X122535117Y-82749952D01* -X122561155Y-82768870D01* -X122704184Y-82841747D01* -X122785616Y-82883239D01* -X122785618Y-82883239D01* -X122785621Y-82883241D01* -X123025215Y-82961090D01* -X123274038Y-83000500D01* -X123274039Y-83000500D01* -X123525961Y-83000500D01* -X123525962Y-83000500D01* -X123774785Y-82961090D01* -X123897698Y-82921153D01* +X127440297Y-84421153D01* +X127468343Y-84379179D01* +X127528686Y-84233497D01* +X127559449Y-84078842D01* +X127559449Y-83921158D01* +X127559449Y-83921155D01* +X127559448Y-83921153D01* +X127533480Y-83790606D01* +X127528686Y-83766503D01* +X127528684Y-83766498D01* +X127468346Y-83620827D01* +X127468339Y-83620814D01* +X127380738Y-83489711D01* +X127380735Y-83489707D01* +X127269241Y-83378213D01* +X127269237Y-83378210D01* +X127138134Y-83290609D01* +X127138121Y-83290602D01* +X126992450Y-83230264D01* +X126992438Y-83230261D01* +X126837794Y-83199500D01* +X126837791Y-83199500D01* +X126680107Y-83199500D01* +X126680104Y-83199500D01* +X126525459Y-83230261D01* +X126525447Y-83230264D01* +X126379776Y-83290602D01* +X126379763Y-83290609D01* +X126248660Y-83378210D01* +X126248656Y-83378213D01* +X126137162Y-83489707D01* +X126137159Y-83489711D01* +X126049558Y-83620814D01* +X126049551Y-83620827D01* +X125989213Y-83766498D01* +X125989210Y-83766510D01* +X125958449Y-83921153D01* +X120250500Y-83921153D01* +X120250500Y-82921153D01* X146699500Y-82921153D01* X146699500Y-83078846D01* X146730261Y-83233489D01* @@ -6817,7 +6885,7 @@ X146989707Y-83621786D01* X146989711Y-83621789D01* X147120814Y-83709390D01* X147120827Y-83709397D01* -X147266498Y-83769735D01* +X147258683Y-83766498D01* X147266503Y-83769737D01* X147421153Y-83800499D01* X147421156Y-83800500D01* @@ -6834,7 +6902,7 @@ X148300500Y-83078842D01* X148300500Y-82921158D01* X148300500Y-82921155D01* X148300499Y-82921153D01* -X148277311Y-82804581D01* +X148269738Y-82766510D01* X148269737Y-82766503D01* X148269735Y-82766498D01* X148209397Y-82620827D01* @@ -6864,28 +6932,32 @@ X146790602Y-82620827D01* X146730264Y-82766498D01* X146730261Y-82766510D01* X146699500Y-82921153D01* -X123897698Y-82921153D01* -X124014379Y-82883241D01* -X124238845Y-82768870D01* -X124442656Y-82620793D01* -X124620793Y-82442656D01* -X124768870Y-82238845D01* -X124883241Y-82014379D01* -X124961090Y-81774785D01* -X125000500Y-81525962D01* -X125000500Y-81274038D01* -X124961090Y-81025215D01* -X124883241Y-80785621D01* -X124883239Y-80785618D01* -X124883239Y-80785616D01* -X124826439Y-80674141D01* -X124768870Y-80561155D01* -X124684192Y-80444605D01* -X124643033Y-80387954D01* -X124643030Y-80387951D01* -X124635955Y-80378213D01* -X124620793Y-80357344D01* -X124584602Y-80321153D01* +X120250500Y-82921153D01* +X120250500Y-78721153D01* +X132549500Y-78721153D01* +X132549500Y-78878846D01* +X132580261Y-79033489D01* +X132580264Y-79033501D01* +X132640602Y-79179172D01* +X132640609Y-79179185D01* +X132728210Y-79310288D01* +X132728213Y-79310292D01* +X132839707Y-79421786D01* +X132839711Y-79421789D01* +X132975886Y-79512779D01* +X132974515Y-79514830D01* +X133016636Y-79556170D01* +X133032125Y-79624301D01* +X133008321Y-79689991D01* +X132977256Y-79719713D01* +X132889713Y-79778208D01* +X132889707Y-79778213D01* +X132778213Y-79889707D01* +X132778210Y-79889711D01* +X132690609Y-80020814D01* +X132690602Y-80020827D01* +X132630264Y-80166498D01* +X132630261Y-80166510D01* X132599500Y-80321153D01* X132599500Y-80478846D01* X132630261Y-80633489D01* @@ -6982,7 +7054,7 @@ X138010289Y-81621789D01* X138121789Y-81510289D01* X138209394Y-81379179D01* X138211220Y-81374772D01* -X138252944Y-81274038D01* +X138241984Y-81300499D01* X138269737Y-81233497D01* X138300500Y-81078842D01* X138300500Y-80921158D01* @@ -7084,7 +7156,7 @@ X146300500Y-80578842D01* X146300500Y-80421158D01* X146300500Y-80421155D01* X146300499Y-80421153D01* -X146287807Y-80357345D01* +X146283063Y-80333497D01* X146269737Y-80266503D01* X146256206Y-80233836D01* X146209397Y-80120827D01* @@ -7115,9 +7187,9 @@ X145800500Y-78578842D01* X145800500Y-78421158D01* X145800500Y-78421155D01* X145800499Y-78421153D01* -X145786649Y-78351524D01* +X145774353Y-78289711D01* X145769737Y-78266503D01* -X145731842Y-78175016D01* +X145741055Y-78197257D01* X145709397Y-78120827D01* X145709390Y-78120814D01* X145621789Y-77989711D01* @@ -7143,7 +7215,8 @@ X145510289Y-77621789D01* X145621789Y-77510289D01* X145709394Y-77379179D01* X145769737Y-77233497D01* -X145788648Y-77138428D01* +X145786246Y-77150500D01* +X145788647Y-77138428D01* X149400000Y-77138428D01* X149400000Y-77250000D01* X150219670Y-77250000D01* @@ -7207,10 +7280,10 @@ X153589999Y-76722203D01* X153534814Y-76555666D01* X153442712Y-76406344D01* X153318656Y-76282288D01* -X153194310Y-76205591D01* +X153188781Y-76202181D01* X153169336Y-76190187D01* X153169331Y-76190185D01* -X153139382Y-76180261D01* +X153167862Y-76189698D01* X153002797Y-76135001D01* X153002795Y-76135000D01* X152900010Y-76124500D01* @@ -7253,16 +7326,15 @@ X149559195Y-76648475D01* X149480591Y-76802742D01* X149427085Y-76967415D01* X149400000Y-77138428D01* -X145788648Y-77138428D01* -X145791319Y-77125000D01* +X145788647Y-77138428D01* X145794429Y-77109365D01* X145794429Y-77109364D01* X145800500Y-77078844D01* X145800500Y-76921155D01* X145800499Y-76921153D01* -X145792150Y-76879179D01* +X145781369Y-76824981D01* X145769737Y-76766503D01* -X145753782Y-76727984D01* +X145756062Y-76733489D01* X145709397Y-76620827D01* X145709390Y-76620814D01* X145621789Y-76489711D01* @@ -7459,163 +7531,88 @@ X134021789Y-79889711D01* X134021786Y-79889707D01* X133910292Y-79778213D01* X133910288Y-79778210D01* -X133779185Y-79690609D01* -X133779172Y-79690602D01* -X133633501Y-79630264D01* -X133633489Y-79630261D01* -X133478845Y-79599500D01* -X133478842Y-79599500D01* -X133321158Y-79599500D01* -X133321155Y-79599500D01* -X133166510Y-79630261D01* -X133166498Y-79630264D01* -X133020827Y-79690602D01* -X133020814Y-79690609D01* -X132889711Y-79778210D01* -X132889707Y-79778213D01* -X132778213Y-79889707D01* -X132778210Y-79889711D01* -X132690609Y-80020814D01* -X132690602Y-80020827D01* -X132630264Y-80166498D01* -X132630261Y-80166510D01* -X132599500Y-80321153D01* -X124584602Y-80321153D01* -X124442656Y-80179207D01* -X124442654Y-80179205D01* -X124442649Y-80179201D01* -X124238848Y-80031132D01* -X124238847Y-80031131D01* -X124238845Y-80031130D01* -X124157548Y-79989707D01* -X124014383Y-79916760D01* -X123774785Y-79838910D01* -X123666669Y-79821786D01* -X123525962Y-79799500D01* -X123274038Y-79799500D01* -X123149626Y-79819205D01* -X123025214Y-79838910D01* -X122785616Y-79916760D01* -X122561151Y-80031132D01* -X122357350Y-80179201D01* -X122357345Y-80179205D01* -X122179205Y-80357345D01* -X122179201Y-80357350D01* -X122031132Y-80561151D01* -X121916760Y-80785616D01* -X121838910Y-81025214D01* -X121811147Y-81200500D01* -X121799500Y-81274038D01* -X120250500Y-81274038D01* -X120250500Y-77921153D01* -X125399500Y-77921153D01* -X125399500Y-78078846D01* -X125430261Y-78233489D01* -X125430264Y-78233501D01* -X125490602Y-78379172D01* -X125490609Y-78379185D01* -X125578210Y-78510288D01* -X125578213Y-78510292D01* -X125689707Y-78621786D01* -X125689711Y-78621789D01* -X125820814Y-78709390D01* -X125820827Y-78709397D01* -X125966498Y-78769735D01* -X125966503Y-78769737D01* -X126090532Y-78794408D01* -X126121153Y-78800499D01* -X126121156Y-78800500D01* -X126121158Y-78800500D01* -X126278844Y-78800500D01* -X126278845Y-78800499D01* -X126433497Y-78769737D01* -X126546166Y-78723067D01* -X126579172Y-78709397D01* -X126579172Y-78709396D01* -X126579179Y-78709394D01* -X126710289Y-78621789D01* -X126821789Y-78510289D01* -X126909394Y-78379179D01* -X126969737Y-78233497D01* -X127000500Y-78078842D01* -X127000500Y-77921158D01* -X127000500Y-77921155D01* -X127000499Y-77921153D01* -X126991956Y-77878207D01* -X126969737Y-77766503D01* -X126969735Y-77766498D01* -X126909397Y-77620827D01* -X126909390Y-77620814D01* -X126821789Y-77489711D01* -X126821786Y-77489707D01* -X126710292Y-77378213D01* -X126710288Y-77378210D01* -X126579185Y-77290609D01* -X126579172Y-77290602D01* -X126433501Y-77230264D01* -X126433489Y-77230261D01* -X126278845Y-77199500D01* -X126278842Y-77199500D01* -X126121158Y-77199500D01* -X126121155Y-77199500D01* -X125966510Y-77230261D01* -X125966498Y-77230264D01* -X125820827Y-77290602D01* -X125820814Y-77290609D01* -X125689711Y-77378210D01* -X125689707Y-77378213D01* -X125578213Y-77489707D01* -X125578210Y-77489711D01* -X125490609Y-77620814D01* -X125490602Y-77620827D01* -X125430264Y-77766498D01* -X125430261Y-77766510D01* -X125399500Y-77921153D01* -X120250500Y-77921153D01* -X120250500Y-74921153D01* -X126399500Y-74921153D01* -X126399500Y-75078846D01* -X126430261Y-75233489D01* -X126430264Y-75233501D01* -X126490602Y-75379172D01* -X126490609Y-75379185D01* -X126578210Y-75510288D01* -X126578213Y-75510292D01* -X126689707Y-75621786D01* -X126689711Y-75621789D01* -X126820814Y-75709390D01* -X126820827Y-75709397D01* -X126966498Y-75769735D01* -X126966503Y-75769737D01* -X127121153Y-75800499D01* -X127121156Y-75800500D01* -X127121158Y-75800500D01* -X127175162Y-75800500D01* -X127242201Y-75820185D01* -X127287956Y-75872989D01* -X127289715Y-75877029D01* -X127290606Y-75879179D01* -X127290607Y-75879180D01* -X127290609Y-75879185D01* -X127325304Y-75931109D01* -X127346182Y-75997786D01* -X127327698Y-76065167D01* -X127325304Y-76068891D01* -X127290609Y-76120814D01* -X127290602Y-76120827D01* -X127230264Y-76266498D01* -X127230261Y-76266510D01* -X127199500Y-76421153D01* -X127199500Y-76578846D01* -X127230261Y-76733489D01* -X127230264Y-76733501D01* -X127290602Y-76879172D01* -X127290609Y-76879185D01* -X127378210Y-77010288D01* -X127378213Y-77010292D01* -X127489707Y-77121786D01* -X127489711Y-77121789D01* -X127620814Y-77209390D01* +X133774114Y-79687221D01* +X133775480Y-79685175D01* +X133733347Y-79643800D01* +X133717876Y-79575665D01* +X133741697Y-79509981D01* +X133772744Y-79480285D01* +X133795535Y-79465055D01* +X133860289Y-79421789D01* +X133971789Y-79310289D01* +X134059394Y-79179179D01* +X134065558Y-79164299D01* +X134075394Y-79140551D01* +X134119737Y-79033497D01* +X134150500Y-78878842D01* +X134150500Y-78721158D01* +X134150500Y-78721155D01* +X134150499Y-78721153D01* +X134132419Y-78630261D01* +X134119737Y-78566503D01* +X134094856Y-78506434D01* +X134059397Y-78420827D01* +X134059390Y-78420814D01* +X133971789Y-78289711D01* +X133971786Y-78289707D01* +X133860292Y-78178213D01* +X133860288Y-78178210D01* +X133729185Y-78090609D01* +X133729172Y-78090602D01* +X133583501Y-78030264D01* +X133583489Y-78030261D01* +X133428845Y-77999500D01* +X133428842Y-77999500D01* +X133271158Y-77999500D01* +X133271155Y-77999500D01* +X133116510Y-78030261D01* +X133116498Y-78030264D01* +X132970827Y-78090602D01* +X132970814Y-78090609D01* +X132839711Y-78178210D01* +X132839707Y-78178213D01* +X132728213Y-78289707D01* +X132728210Y-78289711D01* +X132640609Y-78420814D01* +X132640602Y-78420827D01* +X132580264Y-78566498D01* +X132580261Y-78566510D01* +X132549500Y-78721153D01* +X120250500Y-78721153D01* +X120250500Y-76821153D01* +X125899500Y-76821153D01* +X125899500Y-76978846D01* +X125930261Y-77133489D01* +X125930264Y-77133501D01* +X125990602Y-77279172D01* +X125990609Y-77279185D01* +X126078210Y-77410288D01* +X126078213Y-77410292D01* +X126189707Y-77521786D01* +X126189711Y-77521789D01* +X126320814Y-77609390D01* +X126320827Y-77609397D01* +X126460228Y-77667138D01* +X126466503Y-77669737D01* +X126621153Y-77700499D01* +X126621156Y-77700500D01* +X126621158Y-77700500D01* +X126778844Y-77700500D01* +X126778845Y-77700499D01* +X126933497Y-77669737D01* +X127079179Y-77609394D01* +X127210289Y-77521789D01* +X127321789Y-77410289D01* +X127409394Y-77279179D01* +X127420043Y-77253468D01* +X127463884Y-77199065D01* +X127530178Y-77176999D01* +X127597877Y-77194277D01* +X127603497Y-77197819D01* +X127620813Y-77209389D01* +X127620815Y-77209390D01* +X127620821Y-77209394D01* +X127620823Y-77209395D01* X127620827Y-77209397D01* X127718853Y-77250000D01* X127766503Y-77269737D01* @@ -7627,106 +7624,110 @@ X128078845Y-77300499D01* X128233497Y-77269737D01* X128379179Y-77209394D01* X128510289Y-77121789D01* +X128510925Y-77121153D01* +X130149500Y-77121153D01* +X130149500Y-77278846D01* +X130180261Y-77433489D01* +X130180264Y-77433501D01* +X130240602Y-77579172D01* +X130240609Y-77579185D01* +X130328210Y-77710288D01* +X130328213Y-77710292D01* +X130439707Y-77821786D01* +X130439711Y-77821789D01* +X130570814Y-77909390D01* +X130570827Y-77909397D01* +X130716498Y-77969735D01* +X130716503Y-77969737D01* +X130866131Y-77999500D01* +X130871153Y-78000499D01* +X130871156Y-78000500D01* +X130871158Y-78000500D01* +X131028844Y-78000500D01* +X131028845Y-78000499D01* +X131183497Y-77969737D01* +X131329179Y-77909394D01* +X131460289Y-77821789D01* +X131571789Y-77710289D01* +X131659394Y-77579179D01* +X131719737Y-77433497D01* +X131750500Y-77278842D01* +X131750500Y-77121158D01* +X131750500Y-77121155D01* +X131750499Y-77121153D01* +X131747698Y-77107071D01* +X131719737Y-76966503D01* +X131700955Y-76921158D01* +X131659397Y-76820827D01* +X131659390Y-76820814D01* +X131571789Y-76689711D01* +X131571786Y-76689707D01* +X131460292Y-76578213D01* +X131460288Y-76578210D01* +X131329185Y-76490609D01* +X131329172Y-76490602D01* +X131183501Y-76430264D01* +X131183489Y-76430261D01* +X131028845Y-76399500D01* +X131028842Y-76399500D01* +X130871158Y-76399500D01* +X130871155Y-76399500D01* +X130716510Y-76430261D01* +X130716498Y-76430264D01* +X130570827Y-76490602D01* +X130570814Y-76490609D01* +X130439711Y-76578210D01* +X130439707Y-76578213D01* +X130328213Y-76689707D01* +X130328210Y-76689711D01* +X130240609Y-76820814D01* +X130240602Y-76820827D01* +X130180264Y-76966498D01* +X130180261Y-76966510D01* +X130149500Y-77121153D01* +X128510925Y-77121153D01* +X128553236Y-77078842D01* +X128604694Y-77027385D01* +X128621786Y-77010292D01* X128621789Y-77010289D01* X128709394Y-76879179D01* -X128709395Y-76879176D01* -X128709397Y-76879173D01* -X128712719Y-76871153D01* -X130099500Y-76871153D01* -X130099500Y-77028846D01* -X130130261Y-77183489D01* -X130130264Y-77183501D01* -X130190602Y-77329172D01* -X130190609Y-77329185D01* -X130278210Y-77460288D01* -X130278213Y-77460292D01* -X130389707Y-77571786D01* -X130389711Y-77571789D01* -X130520814Y-77659390D01* -X130520827Y-77659397D01* -X130666498Y-77719735D01* -X130666503Y-77719737D01* -X130780392Y-77742391D01* -X130821153Y-77750499D01* -X130821156Y-77750500D01* -X130821158Y-77750500D01* -X130978844Y-77750500D01* -X130978845Y-77750499D01* -X131133497Y-77719737D01* -X131246166Y-77673067D01* -X131279172Y-77659397D01* -X131279172Y-77659396D01* -X131279179Y-77659394D01* -X131410289Y-77571789D01* -X131521789Y-77460289D01* -X131609394Y-77329179D01* -X131669737Y-77183497D01* -X131700500Y-77028842D01* -X131700500Y-76871158D01* -X131700500Y-76871155D01* -X131700499Y-76871153D01* -X131685839Y-76797453D01* -X131669737Y-76716503D01* -X131630102Y-76620814D01* -X131609397Y-76570827D01* -X131609390Y-76570814D01* -X131521789Y-76439711D01* -X131521786Y-76439707D01* -X131410292Y-76328213D01* -X131410288Y-76328210D01* -X131324897Y-76271153D01* +X128769737Y-76733497D01* +X128800500Y-76578842D01* +X128800500Y-76421158D01* +X128800500Y-76421155D01* +X128800499Y-76421153D01* +X128774264Y-76289257D01* +X128770662Y-76271153D01* X132549500Y-76271153D01* X132549500Y-76428846D01* X132580261Y-76583489D01* X132580264Y-76583501D01* -X132629575Y-76702549D01* -X132637044Y-76772018D01* -X132629575Y-76797453D01* -X132580264Y-76916501D01* -X132580261Y-76916513D01* -X132549500Y-77071156D01* -X132549500Y-77228849D01* -X132580261Y-77383492D01* -X132580264Y-77383504D01* -X132640602Y-77529175D01* -X132640609Y-77529188D01* -X132728210Y-77660291D01* -X132728213Y-77660295D01* -X132839707Y-77771789D01* -X132839711Y-77771792D01* -X132970814Y-77859393D01* -X132970827Y-77859400D01* -X133116498Y-77919738D01* -X133116503Y-77919740D01* -X133271153Y-77950502D01* -X133271156Y-77950503D01* -X133271158Y-77950503D01* -X133428844Y-77950503D01* -X133428845Y-77950502D01* -X133583497Y-77919740D01* -X133696166Y-77873070D01* -X133729172Y-77859400D01* -X133729172Y-77859399D01* -X133729179Y-77859397D01* -X133860289Y-77771792D01* -X133971789Y-77660292D01* -X134059394Y-77529182D01* -X134119737Y-77383500D01* -X134150500Y-77228845D01* -X134150500Y-77071161D01* -X134150500Y-77071158D01* -X134150499Y-77071156D01* -X134142083Y-77028846D01* -X134119737Y-76916506D01* -X134070423Y-76797452D01* -X134062955Y-76727984D01* -X134070424Y-76702549D01* +X132640602Y-76729172D01* +X132640609Y-76729185D01* +X132728210Y-76860288D01* +X132728213Y-76860292D01* +X132839707Y-76971786D01* +X132839711Y-76971789D01* +X132970814Y-77059390D01* +X132970827Y-77059397D01* +X133116498Y-77119735D01* +X133116503Y-77119737D01* +X133271153Y-77150499D01* +X133271156Y-77150500D01* +X133271158Y-77150500D01* +X133428844Y-77150500D01* +X133428845Y-77150499D01* +X133583497Y-77119737D01* +X133729179Y-77059394D01* +X133860289Y-76971789D01* +X133971789Y-76860289D01* +X134059394Y-76729179D01* X134119737Y-76583497D01* X134150500Y-76428842D01* X134150500Y-76271158D01* X134150500Y-76271155D01* X134150499Y-76271153D01* -X134134394Y-76190187D01* +X134137458Y-76205591D01* X134119737Y-76116503D01* X134072398Y-76002215D01* X134059397Y-75970827D01* @@ -7756,40 +7757,9 @@ X132640602Y-75970827D01* X132580264Y-76116498D01* X132580261Y-76116510D01* X132549500Y-76271153D01* -X131324897Y-76271153D01* -X131279185Y-76240609D01* -X131279172Y-76240602D01* -X131133501Y-76180264D01* -X131133489Y-76180261D01* -X130978845Y-76149500D01* -X130978842Y-76149500D01* -X130821158Y-76149500D01* -X130821155Y-76149500D01* -X130666510Y-76180261D01* -X130666498Y-76180264D01* -X130520827Y-76240602D01* -X130520814Y-76240609D01* -X130389711Y-76328210D01* -X130389707Y-76328213D01* -X130278213Y-76439707D01* -X130278210Y-76439711D01* -X130190609Y-76570814D01* -X130190602Y-76570827D01* -X130130264Y-76716498D01* -X130130261Y-76716510D01* -X130099500Y-76871153D01* -X128712719Y-76871153D01* -X128734895Y-76817614D01* -X128734895Y-76817613D01* -X128743245Y-76797454D01* -X128769737Y-76733497D01* -X128800500Y-76578842D01* -X128800500Y-76421158D01* -X128800500Y-76421155D01* -X128800499Y-76421153D01* -X128782012Y-76328213D01* -X128769737Y-76266503D01* -X128763108Y-76250499D01* +X128770662Y-76271153D01* +X128769738Y-76266507D01* +X128769735Y-76266498D01* X128709396Y-76120825D01* X128709394Y-76120822D01* X128709394Y-76120821D01* @@ -7817,7 +7787,7 @@ X139489707Y-76071786D01* X139489711Y-76071789D01* X139620814Y-76159390D01* X139620827Y-76159397D01* -X139695162Y-76190187D01* +X139732351Y-76205591D01* X139766503Y-76219737D01* X139921153Y-76250499D01* X139921156Y-76250500D01* @@ -7836,7 +7806,7 @@ X140800500Y-75371155D01* X140800499Y-75371153D01* X140779684Y-75266510D01* X140769737Y-75216503D01* -X140730102Y-75120814D01* +X140730105Y-75120821D01* X140709397Y-75070827D01* X140709390Y-75070814D01* X140621789Y-74939711D01* @@ -7875,45 +7845,23 @@ X128621786Y-74989707D01* X128510292Y-74878213D01* X128510288Y-74878210D01* X128379185Y-74790609D01* -X128379172Y-74790602D01* -X128233501Y-74730264D01* -X128233489Y-74730261D01* -X128078845Y-74699500D01* -X128078842Y-74699500D01* -X128024838Y-74699500D01* -X127957799Y-74679815D01* -X127912044Y-74627011D01* -X127910275Y-74622949D01* -X127909394Y-74620821D01* -X127909391Y-74620816D01* -X127909390Y-74620814D01* -X127821789Y-74489711D01* -X127821786Y-74489707D01* -X127710292Y-74378213D01* -X127710288Y-74378210D01* -X127579185Y-74290609D01* -X127579172Y-74290602D01* -X127433501Y-74230264D01* -X127433489Y-74230261D01* -X127278845Y-74199500D01* -X127278842Y-74199500D01* -X127121158Y-74199500D01* -X127121155Y-74199500D01* -X126966510Y-74230261D01* -X126966498Y-74230264D01* -X126820827Y-74290602D01* -X126820814Y-74290609D01* -X126689711Y-74378210D01* -X126689707Y-74378213D01* -X126578213Y-74489707D01* -X126578210Y-74489711D01* -X126490609Y-74620814D01* -X126490602Y-74620827D01* -X126430264Y-74766498D01* -X126430261Y-74766510D01* -X126399500Y-74921153D01* -X120250500Y-74921153D01* -X120250500Y-73821153D01* +X128379173Y-74790603D01* +X128359771Y-74782566D01* +X128305368Y-74738724D01* +X128283305Y-74672429D01* +X128300585Y-74604730D01* +X128304106Y-74599143D01* +X128333659Y-74554914D01* +X128394002Y-74409232D01* +X128424765Y-74254577D01* +X128424765Y-74096893D01* +X128424765Y-74096890D01* +X128424764Y-74096888D01* +X128394003Y-73942245D01* +X128394002Y-73942238D01* +X128367885Y-73879185D01* +X128360982Y-73862518D01* +X128343848Y-73821153D01* X130449500Y-73821153D01* X130449500Y-73978846D01* X130480261Y-74133489D01* @@ -7928,14 +7876,13 @@ X130870814Y-74609390D01* X130870827Y-74609397D01* X131005378Y-74665129D01* X131016503Y-74669737D01* -X131166131Y-74699500D01* X131171153Y-74700499D01* X131171156Y-74700500D01* X131171158Y-74700500D01* X131328844Y-74700500D01* X131328845Y-74700499D01* X131483497Y-74669737D01* -X131601596Y-74620819D01* +X131601592Y-74620821D01* X131629172Y-74609397D01* X131629172Y-74609396D01* X131629179Y-74609394D01* @@ -8016,7 +7963,7 @@ X151300500Y-75078842D01* X151300500Y-74921158D01* X151300500Y-74921155D01* X151300499Y-74921153D01* -X151282012Y-74828213D01* +X151293333Y-74885127D01* X151269737Y-74766503D01* X151264249Y-74753254D01* X151209397Y-74620827D01* @@ -8060,8 +8007,9 @@ X149344765Y-74034577D01* X149344765Y-73876893D01* X149344765Y-73876890D01* X149344764Y-73876888D01* +X149341906Y-73862518D01* X149314002Y-73722238D01* -X149290914Y-73666498D01* +X149304998Y-73700500D01* X149253662Y-73576562D01* X149253655Y-73576549D01* X149166054Y-73445446D01* @@ -8093,9 +8041,8 @@ X132050500Y-73876888D01* X132050500Y-73821158D01* X132050500Y-73821155D01* X132050499Y-73821153D01* -X132019738Y-73666510D01* X132019737Y-73666503D01* -X131982477Y-73576549D01* +X131973115Y-73553946D01* X131959397Y-73520827D01* X131959390Y-73520814D01* X131871789Y-73389711D01* @@ -8123,244 +8070,312 @@ X130540602Y-73520827D01* X130480264Y-73666498D01* X130480261Y-73666510D01* X130449500Y-73821153D01* -X120250500Y-73821153D01* -X120250500Y-71021153D01* -X123099500Y-71021153D01* -X123099500Y-71178846D01* -X123130261Y-71333489D01* -X123130264Y-71333501D01* -X123190602Y-71479172D01* -X123190609Y-71479185D01* -X123278210Y-71610288D01* -X123278213Y-71610292D01* -X123389707Y-71721786D01* -X123389711Y-71721789D01* -X123520814Y-71809390D01* -X123520827Y-71809397D01* -X123666498Y-71869735D01* -X123666503Y-71869737D01* -X123821153Y-71900499D01* -X123821156Y-71900500D01* -X123821158Y-71900500D01* -X123978844Y-71900500D01* -X123978845Y-71900499D01* -X124133497Y-71869737D01* -X124279179Y-71809394D01* -X124390811Y-71734803D01* -X124457485Y-71713927D01* -X124524865Y-71732411D01* -X124571555Y-71784389D01* -X124581316Y-71813715D01* -X124605141Y-71933490D01* -X124605144Y-71933500D01* -X124665482Y-72079171D01* -X124665489Y-72079184D01* -X124753090Y-72210287D01* -X124753093Y-72210291D01* -X124864587Y-72321785D01* -X124864591Y-72321788D01* -X124995694Y-72409389D01* -X124995707Y-72409396D01* -X125141378Y-72469734D01* -X125141383Y-72469736D01* -X125296033Y-72500498D01* -X125296036Y-72500499D01* -X125296038Y-72500499D01* -X125453724Y-72500499D01* -X125453725Y-72500498D01* -X125608377Y-72469736D01* -X125754059Y-72409393D01* -X125885169Y-72321788D01* -X125996669Y-72210288D01* -X126084274Y-72079178D01* -X126144617Y-71933496D01* -X126175380Y-71778841D01* -X126175380Y-71621157D01* -X126175380Y-71621154D01* -X126175379Y-71621152D01* -X126163432Y-71561090D01* -X126144617Y-71466502D01* -X126108308Y-71378844D01* -X126084277Y-71320826D01* -X126084273Y-71320819D01* -X126074630Y-71306387D01* -X126017679Y-71221153D01* -X126699500Y-71221153D01* -X126699500Y-71378846D01* -X126730261Y-71533489D01* -X126730264Y-71533501D01* -X126790602Y-71679172D01* -X126790609Y-71679185D01* -X126878210Y-71810288D01* -X126878213Y-71810292D01* -X126989707Y-71921786D01* -X126989711Y-71921789D01* -X127120814Y-72009390D01* -X127120827Y-72009397D01* -X127266498Y-72069735D01* -X127266503Y-72069737D01* -X127421153Y-72100499D01* -X127421156Y-72100500D01* -X127421158Y-72100500D01* -X127578844Y-72100500D01* -X127578845Y-72100499D01* -X127733497Y-72069737D01* -X127879179Y-72009394D01* -X128010289Y-71921789D01* -X128121789Y-71810289D01* -X128147939Y-71771153D01* -X132449500Y-71771153D01* -X132449500Y-71928846D01* -X132480261Y-72083489D01* -X132480264Y-72083501D01* -X132540602Y-72229172D01* -X132540609Y-72229185D01* -X132628210Y-72360288D01* -X132628213Y-72360292D01* -X132739707Y-72471786D01* -X132739711Y-72471789D01* -X132870814Y-72559390D01* -X132870827Y-72559397D01* -X133016498Y-72619735D01* -X133016503Y-72619737D01* -X133171153Y-72650499D01* -X133171156Y-72650500D01* -X133171158Y-72650500D01* -X133328844Y-72650500D01* -X133328845Y-72650499D01* -X133483497Y-72619737D01* -X133629179Y-72559394D01* -X133760289Y-72471789D01* -X133871789Y-72360289D01* -X133959394Y-72229179D01* -X134019737Y-72083497D01* -X134050500Y-71928842D01* -X134050500Y-71771158D01* -X134050500Y-71771155D01* -X134050499Y-71771153D01* -X134035585Y-71696175D01* -X134019737Y-71616503D01* -X134017163Y-71610288D01* -X133959397Y-71470827D01* -X133959390Y-71470814D01* -X133871789Y-71339711D01* -X133871786Y-71339707D01* -X133760292Y-71228213D01* -X133760288Y-71228210D01* -X133629185Y-71140609D01* -X133629172Y-71140602D01* -X133483501Y-71080264D01* -X133483489Y-71080261D01* -X133328845Y-71049500D01* -X133328842Y-71049500D01* -X133171158Y-71049500D01* -X133171155Y-71049500D01* -X133016510Y-71080261D01* -X133016498Y-71080264D01* -X132870827Y-71140602D01* -X132870814Y-71140609D01* -X132739711Y-71228210D01* -X132739707Y-71228213D01* -X132628213Y-71339707D01* -X132628210Y-71339711D01* -X132540609Y-71470814D01* -X132540602Y-71470827D01* -X132480264Y-71616498D01* -X132480261Y-71616510D01* -X132449500Y-71771153D01* -X128147939Y-71771153D01* -X128172226Y-71734805D01* -X128198038Y-71696175D01* -X128198038Y-71696174D01* -X128209394Y-71679179D01* -X128269737Y-71533497D01* -X128300500Y-71378842D01* -X128300500Y-71221158D01* -X128300500Y-71221155D01* -X128300499Y-71221153D01* -X128300427Y-71220793D01* -X128269737Y-71066503D01* -X128259859Y-71042656D01* -X128209397Y-70920827D01* -X128209390Y-70920814D01* -X128121789Y-70789711D01* -X128121786Y-70789707D01* -X128010292Y-70678213D01* -X128010288Y-70678210D01* -X127879185Y-70590609D01* -X127879172Y-70590602D01* -X127733501Y-70530264D01* -X127733489Y-70530261D01* -X127578845Y-70499500D01* -X127578842Y-70499500D01* -X127421158Y-70499500D01* -X127421155Y-70499500D01* -X127266510Y-70530261D01* -X127266498Y-70530264D01* -X127120827Y-70590602D01* -X127120814Y-70590609D01* -X126989711Y-70678210D01* -X126989707Y-70678213D01* -X126878213Y-70789707D01* -X126878210Y-70789711D01* -X126790609Y-70920814D01* -X126790602Y-70920827D01* -X126730264Y-71066498D01* -X126730261Y-71066510D01* -X126699500Y-71221153D01* -X126017679Y-71221153D01* -X125996669Y-71189709D01* -X125885172Y-71078212D01* -X125885168Y-71078209D01* -X125754065Y-70990608D01* -X125754052Y-70990601D01* -X125608381Y-70930263D01* -X125608369Y-70930260D01* -X125453725Y-70899499D01* -X125453722Y-70899499D01* -X125296038Y-70899499D01* -X125296035Y-70899499D01* -X125141390Y-70930260D01* -X125141378Y-70930263D01* -X124995707Y-70990601D01* -X124995694Y-70990608D01* -X124884071Y-71065193D01* -X124817393Y-71086071D01* -X124750013Y-71067586D01* -X124703323Y-71015607D01* -X124693563Y-70986282D01* -X124675512Y-70895538D01* -X124669737Y-70866503D01* -X124637929Y-70789711D01* -X124609397Y-70720827D01* -X124609390Y-70720814D01* -X124521789Y-70589711D01* -X124521786Y-70589707D01* -X124410292Y-70478213D01* -X124410288Y-70478210D01* -X124279185Y-70390609D01* -X124279172Y-70390602D01* -X124133501Y-70330264D01* -X124133489Y-70330261D01* -X123978845Y-70299500D01* -X123978842Y-70299500D01* -X123821158Y-70299500D01* -X123821155Y-70299500D01* -X123666510Y-70330261D01* -X123666498Y-70330264D01* -X123520827Y-70390602D01* -X123520814Y-70390609D01* -X123389711Y-70478210D01* -X123389707Y-70478213D01* -X123278213Y-70589707D01* -X123278210Y-70589711D01* -X123190609Y-70720814D01* -X123190602Y-70720827D01* -X123130264Y-70866498D01* -X123130261Y-70866510D01* -X123099500Y-71021153D01* -X120250500Y-71021153D01* -X120250500Y-70021153D01* +X128343848Y-73821153D01* +X128333660Y-73796558D01* +X128333655Y-73796549D01* +X128246054Y-73665446D01* +X128246051Y-73665442D01* +X128134557Y-73553948D01* +X128134553Y-73553945D01* +X128003450Y-73466344D01* +X128003437Y-73466337D01* +X127857766Y-73405999D01* +X127857754Y-73405996D01* +X127703110Y-73375235D01* +X127703107Y-73375235D01* +X127545423Y-73375235D01* +X127545420Y-73375235D01* +X127390775Y-73405996D01* +X127390763Y-73405999D01* +X127245092Y-73466337D01* +X127245079Y-73466344D01* +X127113976Y-73553945D01* +X127113972Y-73553948D01* +X127002478Y-73665442D01* +X127002475Y-73665446D01* +X126914874Y-73796549D01* +X126914867Y-73796562D01* +X126854529Y-73942233D01* +X126854526Y-73942245D01* +X126823765Y-74096888D01* +X126823765Y-74254581D01* +X126854526Y-74409224D01* +X126854529Y-74409236D01* +X126914867Y-74554907D01* +X126914874Y-74554920D01* +X127002475Y-74686023D01* +X127002478Y-74686027D01* +X127113972Y-74797521D01* +X127113976Y-74797524D01* +X127245079Y-74885125D01* +X127245081Y-74885126D01* +X127245086Y-74885129D01* +X127264489Y-74893166D01* +X127318892Y-74937003D01* +X127340959Y-75003297D01* +X127323682Y-75070997D01* +X127320141Y-75076617D01* +X127290608Y-75120816D01* +X127290602Y-75120827D01* +X127230264Y-75266498D01* +X127230261Y-75266510D01* +X127199500Y-75421153D01* +X127199500Y-75578846D01* +X127230261Y-75733489D01* +X127230264Y-75733501D01* +X127290602Y-75879172D01* +X127290609Y-75879185D01* +X127325304Y-75931109D01* +X127346182Y-75997786D01* +X127327698Y-76065167D01* +X127325304Y-76068891D01* +X127290609Y-76120814D01* +X127290604Y-76120823D01* +X127279954Y-76146535D01* +X127236111Y-76200937D01* +X127169817Y-76223000D01* +X127102118Y-76205719D01* +X127096503Y-76202181D01* +X127079185Y-76190609D01* +X127079172Y-76190602D01* +X126933501Y-76130264D01* +X126933489Y-76130261D01* +X126778845Y-76099500D01* +X126778842Y-76099500D01* +X126621158Y-76099500D01* +X126621155Y-76099500D01* +X126466510Y-76130261D01* +X126466498Y-76130264D01* +X126320827Y-76190602D01* +X126320814Y-76190609D01* +X126189711Y-76278210D01* +X126189707Y-76278213D01* +X126078213Y-76389707D01* +X126078210Y-76389711D01* +X125990609Y-76520814D01* +X125990602Y-76520827D01* +X125930264Y-76666498D01* +X125930261Y-76666510D01* +X125899500Y-76821153D01* +X120250500Y-76821153D01* +X120250500Y-73421153D01* +X124899500Y-73421153D01* +X124899500Y-73578846D01* +X124930261Y-73733489D01* +X124930264Y-73733501D01* +X124990602Y-73879172D01* +X124990609Y-73879185D01* +X125078210Y-74010288D01* +X125078213Y-74010292D01* +X125189707Y-74121786D01* +X125189711Y-74121789D01* +X125320814Y-74209390D01* +X125320827Y-74209397D01* +X125466498Y-74269735D01* +X125466503Y-74269737D01* +X125621153Y-74300499D01* +X125621156Y-74300500D01* +X125621158Y-74300500D01* +X125778844Y-74300500D01* +X125778845Y-74300499D01* +X125933497Y-74269737D01* +X126079179Y-74209394D01* +X126210289Y-74121789D01* +X126321789Y-74010289D01* +X126409394Y-73879179D01* +X126469737Y-73733497D01* +X126500500Y-73578842D01* +X126500500Y-73421158D01* +X126500500Y-73421155D01* +X126500499Y-73421153D01* +X126483152Y-73333945D01* +X126469737Y-73266503D01* +X126438298Y-73190602D01* +X126409397Y-73120827D01* +X126409390Y-73120814D01* +X126321789Y-72989711D01* +X126321786Y-72989707D01* +X126210292Y-72878213D01* +X126210288Y-72878210D01* +X126124897Y-72821153D01* +X140099500Y-72821153D01* +X140099500Y-72978846D01* +X140130261Y-73133489D01* +X140130264Y-73133501D01* +X140190602Y-73279172D01* +X140190609Y-73279185D01* +X140278210Y-73410288D01* +X140278213Y-73410292D01* +X140389707Y-73521786D01* +X140389711Y-73521789D01* +X140520814Y-73609390D01* +X140520827Y-73609397D01* +X140658683Y-73666498D01* +X140666503Y-73669737D01* +X140821153Y-73700499D01* +X140821156Y-73700500D01* +X140821158Y-73700500D01* +X140978844Y-73700500D01* +X140978845Y-73700499D01* +X141133497Y-73669737D01* +X141279179Y-73609394D01* +X141410289Y-73521789D01* +X141521789Y-73410289D01* +X141609394Y-73279179D01* +X141669737Y-73133497D01* +X141700500Y-72978842D01* +X141700500Y-72821158D01* +X141700500Y-72821155D01* +X141700499Y-72821153D01* +X141682419Y-72730261D01* +X141669737Y-72666503D01* +X141669735Y-72666498D01* +X141609397Y-72520827D01* +X141609390Y-72520814D01* +X141521789Y-72389711D01* +X141521786Y-72389707D01* +X141410292Y-72278213D01* +X141410288Y-72278210D01* +X141279185Y-72190609D01* +X141279172Y-72190602D01* +X141133501Y-72130264D01* +X141133489Y-72130261D01* +X140978845Y-72099500D01* +X140978842Y-72099500D01* +X140821158Y-72099500D01* +X140821155Y-72099500D01* +X140666510Y-72130261D01* +X140666498Y-72130264D01* +X140520827Y-72190602D01* +X140520814Y-72190609D01* +X140389711Y-72278210D01* +X140389707Y-72278213D01* +X140278213Y-72389707D01* +X140278210Y-72389711D01* +X140190609Y-72520814D01* +X140190602Y-72520827D01* +X140130264Y-72666498D01* +X140130261Y-72666510D01* +X140099500Y-72821153D01* +X126124897Y-72821153D01* +X126079185Y-72790609D01* +X126079172Y-72790602D01* +X125933501Y-72730264D01* +X125933489Y-72730261D01* +X125778845Y-72699500D01* +X125778842Y-72699500D01* +X125621158Y-72699500D01* +X125621155Y-72699500D01* +X125466510Y-72730261D01* +X125466498Y-72730264D01* +X125320827Y-72790602D01* +X125320814Y-72790609D01* +X125189711Y-72878210D01* +X125189707Y-72878213D01* +X125078213Y-72989707D01* +X125078210Y-72989711D01* +X124990609Y-73120814D01* +X124990602Y-73120827D01* +X124930264Y-73266498D01* +X124930261Y-73266510D01* +X124899500Y-73421153D01* +X120250500Y-73421153D01* +X120250500Y-69074038D01* +X121699500Y-69074038D01* +X121699500Y-69325962D01* +X121738910Y-69574785D01* +X121816760Y-69814383D01* +X121895413Y-69968747D01* +X121922115Y-70021153D01* +X121931132Y-70038848D01* +X122079201Y-70242649D01* +X122079205Y-70242654D01* +X122257345Y-70420794D01* +X122257350Y-70420798D01* +X122380525Y-70510289D01* +X122461155Y-70568870D01* +X122565009Y-70621786D01* +X122685616Y-70683239D01* +X122685618Y-70683239D01* +X122685621Y-70683241D01* +X122925215Y-70761090D01* +X123174038Y-70800500D01* +X123174039Y-70800500D01* +X123425961Y-70800500D01* +X123425962Y-70800500D01* +X123674785Y-70761090D01* +X123914379Y-70683241D01* +X124138845Y-70568870D01* +X124342656Y-70420793D01* +X124520793Y-70242656D01* +X124668870Y-70038845D01* +X124728837Y-69921153D01* +X132549500Y-69921153D01* +X132549500Y-70078846D01* +X132580261Y-70233489D01* +X132580264Y-70233501D01* +X132640602Y-70379172D01* +X132640609Y-70379185D01* +X132728210Y-70510288D01* +X132728213Y-70510292D01* +X132839707Y-70621786D01* +X132839711Y-70621789D01* +X132970814Y-70709390D01* +X132970827Y-70709397D01* +X133072952Y-70751698D01* +X133127356Y-70795538D01* +X133149421Y-70861833D01* +X133149500Y-70866259D01* +X133149500Y-70978846D01* +X133180261Y-71133489D01* +X133180264Y-71133501D01* +X133240602Y-71279172D01* +X133240609Y-71279185D01* +X133328210Y-71410288D01* +X133328213Y-71410292D01* +X133439707Y-71521786D01* +X133439711Y-71521789D01* +X133570814Y-71609390D01* +X133570827Y-71609397D01* +X133716498Y-71669735D01* +X133716503Y-71669737D01* +X133871153Y-71700499D01* +X133871156Y-71700500D01* +X133871158Y-71700500D01* +X134028844Y-71700500D01* +X134028845Y-71700499D01* +X134183497Y-71669737D01* +X134329179Y-71609394D01* +X134460289Y-71521789D01* +X134571789Y-71410289D01* +X134659394Y-71279179D01* +X134719737Y-71133497D01* +X134750500Y-70978842D01* +X134750500Y-70821158D01* +X134750500Y-70821155D01* +X134750499Y-70821153D01* +X134740272Y-70769737D01* +X134719737Y-70666503D01* +X134680102Y-70570814D01* +X134659397Y-70520827D01* +X134659390Y-70520814D01* +X134571789Y-70389711D01* +X134571786Y-70389707D01* +X134460292Y-70278213D01* +X134460288Y-70278210D01* +X134329185Y-70190609D01* +X134329175Y-70190604D01* +X134227047Y-70148301D01* +X134211481Y-70135757D01* +X134193297Y-70127453D01* +X134184832Y-70114282D01* +X134172644Y-70104460D01* +X134166331Y-70085492D01* +X134155523Y-70068675D01* +X134151560Y-70041114D01* +X134150579Y-70038166D01* +X134150500Y-70033740D01* +X134150500Y-70021153D01* X143999500Y-70021153D01* X143999500Y-70178846D01* X144030261Y-70333489D01* @@ -8388,7 +8403,7 @@ X144889707Y-71571786D01* X144889711Y-71571789D01* X145020814Y-71659390D01* X145020827Y-71659397D01* -X145152476Y-71713927D01* +X145120060Y-71700500D01* X145166503Y-71719737D01* X145321153Y-71750499D01* X145321156Y-71750500D01* @@ -8405,9 +8420,9 @@ X146200500Y-71028842D01* X146200500Y-70871158D01* X146200500Y-70871155D01* X146200499Y-70871153D01* -X146194073Y-70838848D01* +X146178606Y-70761090D01* X146169737Y-70716503D01* -X146127438Y-70614383D01* +X146155959Y-70683239D01* X146109397Y-70570827D01* X146109390Y-70570814D01* X146021789Y-70439711D01* @@ -8417,84 +8432,13 @@ X145910288Y-70328210D01* X145779185Y-70240609D01* X145779175Y-70240604D01* X145677047Y-70198301D01* -X145667602Y-70190690D01* -X145656013Y-70187111D01* -X145640904Y-70169175D01* X145622644Y-70154460D01* -X145617697Y-70141625D01* -X145610999Y-70133674D01* -X145606637Y-70112931D01* -X145601528Y-70099674D01* -X145600500Y-70091740D01* -X145600500Y-70021158D01* -X145571236Y-69874038D01* -X149999500Y-69874038D01* -X149999500Y-70125962D01* -X150026986Y-70299500D01* -X150038910Y-70374785D01* -X150116760Y-70614383D01* -X150231132Y-70838848D01* -X150379201Y-71042649D01* -X150379205Y-71042654D01* -X150557345Y-71220794D01* -X150557350Y-71220798D01* -X150695028Y-71320826D01* -X150761155Y-71368870D01* -X150904184Y-71441747D01* -X150985616Y-71483239D01* -X150985618Y-71483239D01* -X150985621Y-71483241D01* -X151225215Y-71561090D01* -X151474038Y-71600500D01* -X151474039Y-71600500D01* -X151725961Y-71600500D01* -X151725962Y-71600500D01* -X151974785Y-71561090D01* -X152214379Y-71483241D01* -X152438845Y-71368870D01* -X152642656Y-71220793D01* -X152820793Y-71042656D01* -X152968870Y-70838845D01* -X153083241Y-70614379D01* -X153161090Y-70374785D01* -X153200500Y-70125962D01* -X153200500Y-69874038D01* -X153161090Y-69625215D01* -X153083241Y-69385621D01* -X153083239Y-69385618D01* -X153083239Y-69385616D01* -X153039360Y-69299500D01* -X152968870Y-69161155D01* -X152949952Y-69135117D01* -X152820798Y-68957350D01* -X152820794Y-68957345D01* -X152642654Y-68779205D01* -X152642649Y-68779201D01* -X152438848Y-68631132D01* -X152438847Y-68631131D01* -X152438845Y-68631130D01* -X152368747Y-68595413D01* -X152214383Y-68516760D01* -X151974785Y-68438910D01* -X151866669Y-68421786D01* -X151725962Y-68399500D01* -X151474038Y-68399500D01* -X151349626Y-68419205D01* -X151225214Y-68438910D01* -X150985616Y-68516760D01* -X150761151Y-68631132D01* -X150557350Y-68779201D01* -X150557345Y-68779205D01* -X150379205Y-68957345D01* -X150379201Y-68957350D01* -X150231132Y-69161151D01* -X150116760Y-69385616D01* -X150050447Y-69589707D01* -X150038910Y-69625215D01* -X149999500Y-69874038D01* -X145571236Y-69874038D01* +X145600579Y-70088166D01* +X145600500Y-70083740D01* +X145600500Y-70021155D01* +X145600499Y-70021153D01* X145569737Y-69866503D01* -X145569735Y-69866498D01* +X145566534Y-69858771D01* X145509397Y-69720827D01* X145509390Y-69720814D01* X145421789Y-69589711D01* @@ -8522,306 +8466,394 @@ X144090602Y-69720827D01* X144030264Y-69866498D01* X144030261Y-69866510D01* X143999500Y-70021153D01* -X120250500Y-70021153D01* -X120250500Y-67721153D01* -X129999500Y-67721153D01* -X129999500Y-67878846D01* -X130030261Y-68033489D01* -X130030264Y-68033501D01* -X130090602Y-68179172D01* -X130090609Y-68179185D01* -X130178210Y-68310288D01* -X130178213Y-68310292D01* -X130289707Y-68421786D01* -X130289711Y-68421789D01* -X130420814Y-68509390D01* -X130420827Y-68509397D01* -X130566498Y-68569735D01* -X130566503Y-68569737D01* -X130721153Y-68600499D01* -X130721156Y-68600500D01* -X130721158Y-68600500D01* -X130878844Y-68600500D01* -X130878845Y-68600499D01* -X131033497Y-68569737D01* -X131179179Y-68509394D01* -X131310289Y-68421789D01* -X131421789Y-68310289D01* -X131509394Y-68179179D01* -X131569737Y-68033497D01* -X131600500Y-67878842D01* -X131600500Y-67721158D01* -X131600500Y-67721155D01* -X131600499Y-67721153D01* -X131569738Y-67566510D01* -X131569737Y-67566503D01* -X131569735Y-67566498D01* -X131509397Y-67420827D01* -X131509390Y-67420814D01* -X131421789Y-67289711D01* -X131421786Y-67289707D01* -X131310292Y-67178213D01* -X131310288Y-67178210D01* -X131179185Y-67090609D01* -X131179172Y-67090602D01* -X131033501Y-67030264D01* -X131033489Y-67030261D01* -X130878845Y-66999500D01* -X130878842Y-66999500D01* -X130721158Y-66999500D01* -X130721155Y-66999500D01* -X130566510Y-67030261D01* -X130566498Y-67030264D01* -X130420827Y-67090602D01* -X130420814Y-67090609D01* -X130289711Y-67178210D01* -X130289707Y-67178213D01* -X130178213Y-67289707D01* -X130178210Y-67289711D01* -X130090609Y-67420814D01* -X130090602Y-67420827D01* -X130030264Y-67566498D01* -X130030261Y-67566510D01* -X129999500Y-67721153D01* -X120250500Y-67721153D01* -X120250500Y-64921153D01* -X129949500Y-64921153D01* -X129949500Y-65078846D01* -X129980261Y-65233489D01* -X129980264Y-65233501D01* -X130040602Y-65379172D01* -X130040609Y-65379185D01* -X130128210Y-65510288D01* -X130128213Y-65510292D01* -X130239707Y-65621786D01* -X130239711Y-65621789D01* -X130370814Y-65709390D01* -X130370827Y-65709397D01* -X130516498Y-65769735D01* -X130516503Y-65769737D01* -X130671153Y-65800499D01* -X130671156Y-65800500D01* -X130671158Y-65800500D01* -X130828844Y-65800500D01* -X130828845Y-65800499D01* -X130983497Y-65769737D01* -X131129179Y-65709394D01* -X131260289Y-65621789D01* -X131371789Y-65510289D01* -X131459394Y-65379179D01* -X131519737Y-65233497D01* -X131550500Y-65078842D01* -X131550500Y-64921158D01* -X131550500Y-64921155D01* -X131550499Y-64921153D01* -X131519738Y-64766510D01* -X131519737Y-64766503D01* -X131519735Y-64766498D01* -X131459397Y-64620827D01* -X131459390Y-64620814D01* -X131371789Y-64489711D01* -X131371786Y-64489707D01* -X131260292Y-64378213D01* -X131260288Y-64378210D01* -X131129185Y-64290609D01* -X131129172Y-64290602D01* -X130983501Y-64230264D01* -X130983489Y-64230261D01* -X130828845Y-64199500D01* -X130828842Y-64199500D01* -X130671158Y-64199500D01* -X130671155Y-64199500D01* -X130516510Y-64230261D01* -X130516498Y-64230264D01* -X130370827Y-64290602D01* -X130370814Y-64290609D01* -X130239711Y-64378210D01* -X130239707Y-64378213D01* -X130128213Y-64489707D01* -X130128210Y-64489711D01* -X130040609Y-64620814D01* -X130040602Y-64620827D01* -X129980264Y-64766498D01* -X129980261Y-64766510D01* -X129949500Y-64921153D01* -X120250500Y-64921153D01* -X120250500Y-62921153D01* -X121199500Y-62921153D01* -X121199500Y-63078846D01* -X121230261Y-63233489D01* -X121230264Y-63233501D01* -X121290602Y-63379172D01* -X121290609Y-63379185D01* -X121378210Y-63510288D01* -X121378213Y-63510292D01* -X121489707Y-63621786D01* -X121489711Y-63621789D01* -X121620814Y-63709390D01* -X121620827Y-63709397D01* -X121766498Y-63769735D01* -X121766503Y-63769737D01* -X121907906Y-63797864D01* -X121921153Y-63800499D01* -X121921156Y-63800500D01* -X121921158Y-63800500D01* -X122078844Y-63800500D01* -X122078845Y-63800499D01* -X122233497Y-63769737D01* -X122346166Y-63723067D01* -X122379172Y-63709397D01* -X122379172Y-63709396D01* -X122379179Y-63709394D01* -X122510289Y-63621789D01* -X122621789Y-63510289D01* -X122709394Y-63379179D01* -X122769737Y-63233497D01* -X122800500Y-63078842D01* -X122800500Y-62921158D01* -X122800500Y-62921155D01* -X122800499Y-62921153D01* -X122787391Y-62855255D01* -X122769737Y-62766503D01* -X122731420Y-62673996D01* -X122709397Y-62620827D01* -X122709392Y-62620818D01* -X122707304Y-62617693D01* -X122706712Y-62615804D01* -X122706521Y-62615446D01* -X122706589Y-62615409D01* -X122686425Y-62551016D01* -X122704908Y-62483636D01* -X122756886Y-62436944D01* -X122786213Y-62427183D01* -X122804328Y-62423580D01* -X122931811Y-62370775D01* -X123046542Y-62294114D01* -X123144114Y-62196542D01* -X123220775Y-62081811D01* -X123273580Y-61954328D01* -X123285888Y-61892452D01* -X123300500Y-61818995D01* -X126149499Y-61818995D01* -X126176418Y-61954322D01* -X126176421Y-61954332D01* -X126229221Y-62081804D01* -X126229228Y-62081817D01* -X126305885Y-62196541D01* -X126305888Y-62196545D01* -X126403454Y-62294111D01* -X126403458Y-62294114D01* -X126518182Y-62370771D01* -X126518195Y-62370778D01* -X126645667Y-62423578D01* -X126645672Y-62423580D01* -X126645676Y-62423580D01* -X126645677Y-62423581D01* -X126781004Y-62450500D01* -X126781007Y-62450500D01* -X126918995Y-62450500D01* -X127010041Y-62432389D01* -X127054328Y-62423580D01* -X127181811Y-62370775D01* -X127296542Y-62294114D01* -X127394114Y-62196542D01* -X127470775Y-62081811D01* -X127523580Y-61954328D01* -X127535888Y-61892452D01* -X127550500Y-61818995D01* -X127550500Y-61681004D01* -X127523581Y-61545677D01* -X127523580Y-61545676D01* -X127523580Y-61545672D01* -X127523578Y-61545667D01* -X127470778Y-61418195D01* -X127470771Y-61418182D01* -X127394114Y-61303458D01* -X127394111Y-61303454D01* -X127296545Y-61205888D01* -X127296541Y-61205885D01* -X127181817Y-61129228D01* -X127181804Y-61129221D01* -X127054332Y-61076421D01* -X127054322Y-61076418D01* -X126918995Y-61049500D01* -X126918993Y-61049500D01* -X126781007Y-61049500D01* -X126781005Y-61049500D01* -X126645677Y-61076418D01* -X126645667Y-61076421D01* -X126518195Y-61129221D01* -X126518182Y-61129228D01* -X126403458Y-61205885D01* -X126403454Y-61205888D01* -X126305888Y-61303454D01* -X126305885Y-61303458D01* -X126229228Y-61418182D01* -X126229221Y-61418195D01* -X126176421Y-61545667D01* -X126176418Y-61545677D01* -X126149500Y-61681004D01* -X126149500Y-61681007D01* -X126149500Y-61818993D01* -X126149500Y-61818995D01* -X126149499Y-61818995D01* -X123300500Y-61818995D01* -X123300500Y-61681004D01* -X123273581Y-61545677D01* -X123273580Y-61545676D01* -X123273580Y-61545672D01* -X123273578Y-61545667D01* -X123220778Y-61418195D01* -X123220771Y-61418182D01* -X123144114Y-61303458D01* -X123144111Y-61303454D01* -X123046545Y-61205888D01* -X123046541Y-61205885D01* -X122931817Y-61129228D01* -X122931804Y-61129221D01* -X122804332Y-61076421D01* -X122804322Y-61076418D01* -X122668995Y-61049500D01* -X122668993Y-61049500D01* -X122531007Y-61049500D01* -X122531005Y-61049500D01* -X122395677Y-61076418D01* -X122395667Y-61076421D01* -X122268195Y-61129221D01* -X122268182Y-61129228D01* -X122153458Y-61205885D01* -X122153454Y-61205888D01* -X122055888Y-61303454D01* -X122055885Y-61303458D01* -X121979228Y-61418182D01* -X121979221Y-61418195D01* -X121926421Y-61545667D01* -X121926418Y-61545677D01* -X121899500Y-61681004D01* -X121899500Y-61681007D01* -X121899500Y-61818993D01* -X121899500Y-61818995D01* -X121899499Y-61818995D01* -X121926418Y-61954322D01* -X121926420Y-61954328D01* -X121948515Y-62007671D01* -X121962021Y-62040276D01* -X121969490Y-62109746D01* -X121938215Y-62172225D01* -X121878126Y-62207877D01* -X121871653Y-62209346D01* -X121766507Y-62230262D01* -X121766498Y-62230264D01* -X121620827Y-62290602D01* -X121620814Y-62290609D01* -X121489711Y-62378210D01* -X121489707Y-62378213D01* -X121378213Y-62489707D01* -X121378210Y-62489711D01* -X121290609Y-62620814D01* -X121290602Y-62620827D01* -X121230264Y-62766498D01* -X121230261Y-62766510D01* -X121199500Y-62921153D01* -X120250500Y-62921153D01* +X134150500Y-70021153D01* +X134150500Y-69921155D01* +X134150499Y-69921153D01* +X134119738Y-69766510D01* +X134119737Y-69766503D01* +X134100812Y-69720814D01* +X134059397Y-69620827D01* +X134059390Y-69620814D01* +X133971789Y-69489711D01* +X133971786Y-69489707D01* +X133860292Y-69378213D01* +X133860288Y-69378210D01* +X133729185Y-69290609D01* +X133729172Y-69290602D01* +X133583501Y-69230264D01* +X133583489Y-69230261D01* +X133428845Y-69199500D01* +X133428842Y-69199500D01* +X133271158Y-69199500D01* +X133271155Y-69199500D01* +X133116510Y-69230261D01* +X133116498Y-69230264D01* +X132970827Y-69290602D01* +X132970814Y-69290609D01* +X132839711Y-69378210D01* +X132839707Y-69378213D01* +X132728213Y-69489707D01* +X132728210Y-69489711D01* +X132640609Y-69620814D01* +X132640602Y-69620827D01* +X132580264Y-69766498D01* +X132580261Y-69766510D01* +X132549500Y-69921153D01* +X124728837Y-69921153D01* +X124783241Y-69814379D01* +X124861090Y-69574785D01* +X124900500Y-69325962D01* +X124900500Y-69074038D01* +X150099500Y-69074038D01* +X150099500Y-69325962D01* +X150138910Y-69574785D01* +X150216760Y-69814383D01* +X150295413Y-69968747D01* +X150322115Y-70021153D01* +X150331132Y-70038848D01* +X150479201Y-70242649D01* +X150479205Y-70242654D01* +X150657345Y-70420794D01* +X150657350Y-70420798D01* +X150780525Y-70510289D01* +X150861155Y-70568870D01* +X150965009Y-70621786D01* +X151085616Y-70683239D01* +X151085618Y-70683239D01* +X151085621Y-70683241D01* +X151325215Y-70761090D01* +X151574038Y-70800500D01* +X151574039Y-70800500D01* +X151825961Y-70800500D01* +X151825962Y-70800500D01* +X152074785Y-70761090D01* +X152314379Y-70683241D01* +X152538845Y-70568870D01* +X152742656Y-70420793D01* +X152920793Y-70242656D01* +X153068870Y-70038845D01* +X153183241Y-69814379D01* +X153261090Y-69574785D01* +X153300500Y-69325962D01* +X153300500Y-69074038D01* +X153261090Y-68825215D01* +X153183241Y-68585621D01* +X153183239Y-68585618D01* +X153183239Y-68585616D01* +X153141747Y-68504184D01* +X153068870Y-68361155D01* +X153049952Y-68335117D01* +X152920798Y-68157350D01* +X152920794Y-68157345D01* +X152742654Y-67979205D01* +X152742649Y-67979201D01* +X152538848Y-67831132D01* +X152538847Y-67831131D01* +X152538845Y-67831130D01* +X152468747Y-67795413D01* +X152314383Y-67716760D01* +X152074785Y-67638910D01* +X151825962Y-67599500D01* +X151574038Y-67599500D01* +X151449626Y-67619205D01* +X151325214Y-67638910D01* +X151085616Y-67716760D01* +X150861151Y-67831132D01* +X150657350Y-67979201D01* +X150657345Y-67979205D01* +X150479205Y-68157345D01* +X150479201Y-68157350D01* +X150331132Y-68361151D01* +X150216760Y-68585616D01* +X150138910Y-68825214D01* +X150138910Y-68825215D01* +X150099500Y-69074038D01* +X124900500Y-69074038D01* +X124861090Y-68825215D01* +X124783241Y-68585621D01* +X124783239Y-68585618D01* +X124783239Y-68585616D01* +X124741747Y-68504184D01* +X124668870Y-68361155D01* +X124649952Y-68335117D01* +X124520798Y-68157350D01* +X124520794Y-68157345D01* +X124342654Y-67979205D01* +X124342649Y-67979201D01* +X124138848Y-67831132D01* +X124138847Y-67831131D01* +X124138845Y-67831130D01* +X124068747Y-67795413D01* +X123914383Y-67716760D01* +X123674785Y-67638910D01* +X123425962Y-67599500D01* +X123174038Y-67599500D01* +X123049626Y-67619205D01* +X122925214Y-67638910D01* +X122685616Y-67716760D01* +X122461151Y-67831132D01* +X122257350Y-67979201D01* +X122257345Y-67979205D01* +X122079205Y-68157345D01* +X122079201Y-68157350D01* +X121931132Y-68361151D01* +X121816760Y-68585616D01* +X121738910Y-68825214D01* +X121738910Y-68825215D01* +X121699500Y-69074038D01* +X120250500Y-69074038D01* +X120250500Y-65821153D01* +X129999500Y-65821153D01* +X129999500Y-65978846D01* +X130030261Y-66133489D01* +X130030264Y-66133501D01* +X130090602Y-66279172D01* +X130090609Y-66279185D01* +X130178210Y-66410288D01* +X130178213Y-66410292D01* +X130289707Y-66521786D01* +X130289711Y-66521789D01* +X130420814Y-66609390D01* +X130420827Y-66609397D01* +X130566498Y-66669735D01* +X130566503Y-66669737D01* +X130721153Y-66700499D01* +X130721156Y-66700500D01* +X130721158Y-66700500D01* +X130878844Y-66700500D01* +X130878845Y-66700499D01* +X131033497Y-66669737D01* +X131179179Y-66609394D01* +X131310289Y-66521789D01* +X131421789Y-66410289D01* +X131509394Y-66279179D01* +X131569737Y-66133497D01* +X131600500Y-65978842D01* +X131600500Y-65821158D01* +X131600500Y-65821155D01* +X131600499Y-65821153D01* +X131569738Y-65666510D01* +X131569737Y-65666503D01* +X131569735Y-65666498D01* +X131509397Y-65520827D01* +X131509390Y-65520814D01* +X131421789Y-65389711D01* +X131421786Y-65389707D01* +X131310292Y-65278213D01* +X131310288Y-65278210D01* +X131179185Y-65190609D01* +X131179172Y-65190602D01* +X131033501Y-65130264D01* +X131033489Y-65130261D01* +X130878845Y-65099500D01* +X130878842Y-65099500D01* +X130721158Y-65099500D01* +X130721155Y-65099500D01* +X130566510Y-65130261D01* +X130566498Y-65130264D01* +X130420827Y-65190602D01* +X130420814Y-65190609D01* +X130289711Y-65278210D01* +X130289707Y-65278213D01* +X130178213Y-65389707D01* +X130178210Y-65389711D01* +X130090609Y-65520814D01* +X130090602Y-65520827D01* +X130030264Y-65666498D01* +X130030261Y-65666510D01* +X129999500Y-65821153D01* +X120250500Y-65821153D01* +X120250500Y-64021153D01* +X120899500Y-64021153D01* +X120899500Y-64178846D01* +X120930261Y-64333489D01* +X120930264Y-64333501D01* +X120990602Y-64479172D01* +X120990609Y-64479185D01* +X121078210Y-64610288D01* +X121078213Y-64610292D01* +X121189707Y-64721786D01* +X121189711Y-64721789D01* +X121320814Y-64809390D01* +X121320827Y-64809397D01* +X121466498Y-64869735D01* +X121466503Y-64869737D01* +X121621153Y-64900499D01* +X121621156Y-64900500D01* +X121621158Y-64900500D01* +X121778844Y-64900500D01* +X121778845Y-64900499D01* +X121933497Y-64869737D01* +X122079179Y-64809394D01* +X122210289Y-64721789D01* +X122321789Y-64610289D01* +X122409394Y-64479179D01* +X122469737Y-64333497D01* +X122500500Y-64178842D01* +X122500500Y-64021158D01* +X122500500Y-64021155D01* +X122500499Y-64021153D01* +X122469738Y-63866510D01* +X122469737Y-63866503D01* +X122469735Y-63866498D01* +X122409397Y-63720827D01* +X122409390Y-63720814D01* +X122321789Y-63589711D01* +X122321786Y-63589707D01* +X122210292Y-63478213D01* +X122210288Y-63478210D01* +X122079185Y-63390609D01* +X122079172Y-63390602D01* +X121933501Y-63330264D01* +X121933489Y-63330261D01* +X121778845Y-63299500D01* +X121778842Y-63299500D01* +X121621158Y-63299500D01* +X121621155Y-63299500D01* +X121466510Y-63330261D01* +X121466498Y-63330264D01* +X121320827Y-63390602D01* +X121320814Y-63390609D01* +X121189711Y-63478210D01* +X121189707Y-63478213D01* +X121078213Y-63589707D01* +X121078210Y-63589711D01* +X120990609Y-63720814D01* +X120990602Y-63720827D01* +X120930264Y-63866498D01* +X120930261Y-63866510D01* +X120899500Y-64021153D01* +X120250500Y-64021153D01* +X120250500Y-61818995D01* +X120824499Y-61818995D01* +X120851418Y-61954322D01* +X120851421Y-61954332D01* +X120904221Y-62081804D01* +X120904228Y-62081817D01* +X120980885Y-62196541D01* +X120980888Y-62196545D01* +X121078454Y-62294111D01* +X121078458Y-62294114D01* +X121193182Y-62370771D01* +X121193195Y-62370778D01* +X121320667Y-62423578D01* +X121320672Y-62423580D01* +X121320676Y-62423580D01* +X121320677Y-62423581D01* +X121456004Y-62450500D01* +X121456007Y-62450500D01* +X121593995Y-62450500D01* +X121685041Y-62432389D01* +X121729328Y-62423580D01* +X121856811Y-62370775D01* +X121971542Y-62294114D01* +X122069114Y-62196542D01* +X122145775Y-62081811D01* +X122198580Y-61954328D01* +X122225500Y-61818995D01* +X125074499Y-61818995D01* +X125101418Y-61954322D01* +X125101421Y-61954332D01* +X125154221Y-62081804D01* +X125154228Y-62081817D01* +X125230885Y-62196541D01* +X125230888Y-62196545D01* +X125328454Y-62294111D01* +X125328458Y-62294114D01* +X125443182Y-62370771D01* +X125443195Y-62370778D01* +X125570667Y-62423578D01* +X125570672Y-62423580D01* +X125570676Y-62423580D01* +X125570677Y-62423581D01* +X125706004Y-62450500D01* +X125706007Y-62450500D01* +X125843995Y-62450500D01* +X125935041Y-62432389D01* +X125979328Y-62423580D01* +X126106811Y-62370775D01* +X126221542Y-62294114D01* +X126319114Y-62196542D01* +X126395775Y-62081811D01* +X126448580Y-61954328D01* +X126475500Y-61818993D01* +X126475500Y-61681007D01* +X126475500Y-61681004D01* +X126448581Y-61545677D01* +X126448580Y-61545676D01* +X126448580Y-61545672D01* +X126448578Y-61545667D01* +X126395778Y-61418195D01* +X126395771Y-61418182D01* +X126319114Y-61303458D01* +X126319111Y-61303454D01* +X126221545Y-61205888D01* +X126221541Y-61205885D01* +X126106817Y-61129228D01* +X126106804Y-61129221D01* +X125979332Y-61076421D01* +X125979322Y-61076418D01* +X125843995Y-61049500D01* +X125843993Y-61049500D01* +X125706007Y-61049500D01* +X125706005Y-61049500D01* +X125570677Y-61076418D01* +X125570667Y-61076421D01* +X125443195Y-61129221D01* +X125443182Y-61129228D01* +X125328458Y-61205885D01* +X125328454Y-61205888D01* +X125230888Y-61303454D01* +X125230885Y-61303458D01* +X125154228Y-61418182D01* +X125154221Y-61418195D01* +X125101421Y-61545667D01* +X125101418Y-61545677D01* +X125074500Y-61681004D01* +X125074500Y-61681007D01* +X125074500Y-61818993D01* +X125074500Y-61818995D01* +X125074499Y-61818995D01* +X122225500Y-61818995D01* +X122225500Y-61818993D01* +X122225500Y-61681007D01* +X122225500Y-61681004D01* +X122198581Y-61545677D01* +X122198580Y-61545676D01* +X122198580Y-61545672D01* +X122198578Y-61545667D01* +X122145778Y-61418195D01* +X122145771Y-61418182D01* +X122069114Y-61303458D01* +X122069111Y-61303454D01* +X121971545Y-61205888D01* +X121971541Y-61205885D01* +X121856817Y-61129228D01* +X121856804Y-61129221D01* +X121729332Y-61076421D01* +X121729322Y-61076418D01* +X121593995Y-61049500D01* +X121593993Y-61049500D01* +X121456007Y-61049500D01* +X121456005Y-61049500D01* +X121320677Y-61076418D01* +X121320667Y-61076421D01* +X121193195Y-61129221D01* +X121193182Y-61129228D01* +X121078458Y-61205885D01* +X121078454Y-61205888D01* +X120980888Y-61303454D01* +X120980885Y-61303458D01* +X120904228Y-61418182D01* +X120904221Y-61418195D01* +X120851421Y-61545667D01* +X120851418Y-61545677D01* +X120824500Y-61681004D01* +X120824500Y-61681007D01* +X120824500Y-61818993D01* +X120824500Y-61818995D01* +X120824499Y-61818995D01* +X120250500Y-61818995D01* X120250500Y-60374500D01* X120270185Y-60307461D01* X120322989Y-60261706D01* diff --git a/PCB/production/gerbers/snips_controller-NPTH.drl b/PCB/production/gerbers/snips_controller-NPTH.drl index f9a46c2..2e33c31 100644 --- a/PCB/production/gerbers/snips_controller-NPTH.drl +++ b/PCB/production/gerbers/snips_controller-NPTH.drl @@ -1,7 +1,7 @@ M48 -; DRILL file KiCad 10.0.5 date 2026-10-25T21:30:58 +; DRILL file KiCad 10.0.5 date 2026-10-29T18:08:56 ; FORMAT={-:-/ absolute / metric / decimal} -; #@! TF.CreationDate,2026-10-25T21:30:58-07:00 +; #@! TF.CreationDate,2026-10-29T18:08:56-07:00 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.5 ; #@! TF.FileFunction,NonPlated,1,4,NPTH FMAT,2 @@ -19,21 +19,23 @@ T1 X134.61Y-154.5 X140.39Y-154.5 T2 +X121.525Y-61.75 X121.75Y-88.375 X121.75Y-92.625 X121.75Y-98.4 X121.75Y-102.65 -X122.6Y-61.75 -X126.85Y-61.75 +X125.775Y-61.75 X126.875Y-157.95 X131.125Y-157.95 +X149.225Y-61.75 X153.2Y-88.375 X153.2Y-92.625 X153.2Y-98.4 X153.2Y-102.65 +X153.475Y-61.75 T3 X123.0Y-156.5 -X123.4Y-81.4 -X151.6Y-70.0 +X123.3Y-69.2 +X151.7Y-69.2 X152.0Y-156.5 M30 diff --git a/PCB/production/gerbers/snips_controller-PTH.drl b/PCB/production/gerbers/snips_controller-PTH.drl index f9e00e0..e701c27 100644 --- a/PCB/production/gerbers/snips_controller-PTH.drl +++ b/PCB/production/gerbers/snips_controller-PTH.drl @@ -1,7 +1,7 @@ M48 -; DRILL file KiCad 10.0.5 date 2026-10-25T21:30:58 +; DRILL file KiCad 10.0.5 date 2026-10-29T18:08:56 ; FORMAT={-:-/ absolute / metric / decimal} -; #@! TF.CreationDate,2026-10-25T21:30:58-07:00 +; #@! TF.CreationDate,2026-10-29T18:08:56-07:00 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,10.0.5 ; #@! TF.FileFunction,Plated,1,4,PTH FMAT,2 @@ -29,30 +29,30 @@ T1 X133.0Y-118.5 X133.0Y-119.5 T2 -X121.5Y-67.0 X121.5Y-112.0 -X122.0Y-63.0 +X121.7Y-64.1 X122.5Y-107.5 +X122.6Y-86.3 X123.184Y-132.484 +X123.2Y-64.5 X123.5Y-115.5 X123.5Y-124.0 -X123.9Y-71.1 X124.0Y-129.0 -X124.088Y-90.338 -X124.4Y-84.8 +X124.088Y-90.513 +X124.4Y-88.0 X124.5Y-100.5 -X124.6Y-88.1 +X124.66Y-89.061 X125.0Y-118.0 -X125.25Y-90.5 X125.307Y-152.6 X125.341Y-100.425 -X125.375Y-71.7 +X125.7Y-73.5 +X125.9Y-90.5 X126.0Y-153.0 -X126.2Y-78.0 X126.624Y-119.724 +X126.7Y-76.9 +X126.759Y-84.0 X127.11Y-120.4 -X127.2Y-75.0 -X127.5Y-71.3 +X127.624Y-74.176 X128.0Y-75.5 X128.0Y-76.5 X128.0Y-105.5 @@ -63,23 +63,23 @@ X128.574Y-102.574 X128.75Y-121.25 X129.0Y-116.5 X129.0Y-119.0 -X130.75Y-63.75 -X130.75Y-65.0 -X130.8Y-67.8 -X130.9Y-76.95 +X130.8Y-64.7 +X130.8Y-65.9 +X130.95Y-77.2 X131.05Y-111.2 X131.1Y-87.35 X131.25Y-73.9 X133.021Y-117.7 X133.021Y-120.5 -X133.25Y-71.85 X133.3Y-94.4 +X133.35Y-70.0 X133.35Y-76.35 -X133.35Y-77.15 +X133.35Y-78.8 X133.4Y-80.4 X133.5Y-116.4 X133.589Y-113.975 X133.85Y-111.0 +X133.95Y-70.9 X134.7Y-119.75 X134.7Y-145.5 X134.8Y-80.753 @@ -102,7 +102,6 @@ X137.5Y-81.0 X138.6Y-146.5 X138.8Y-75.6 X139.0Y-119.124 -X139.25Y-73.75 X139.342Y-122.558 X139.5Y-88.0 X139.5Y-118.5 @@ -112,6 +111,8 @@ X139.6Y-79.4 X139.668Y-123.732 X140.0Y-75.45 X140.4Y-89.7 +X140.7Y-71.8 +X140.9Y-72.9 X141.3Y-98.8 X141.5Y-115.388 X142.0Y-84.5 @@ -159,11 +160,8 @@ X153.8Y-86.0 X153.8Y-124.7 X154.4Y-85.0 T4 -X150.16Y-63.0 X150.5Y-77.5 -X151.43Y-63.0 X152.5Y-77.5 -X152.7Y-63.0 T5 X124.0Y-127.5 X124.0Y-149.5 diff --git a/PCB/production/gerbers/snips_controller-job.gbrjob b/PCB/production/gerbers/snips_controller-job.gbrjob index 58aeabc..52e2c2a 100644 --- a/PCB/production/gerbers/snips_controller-job.gbrjob +++ b/PCB/production/gerbers/snips_controller-job.gbrjob @@ -5,7 +5,7 @@ "Application": "Pcbnew", "Version": "10.0.5" }, - "CreationDate": "2026-10-25T21:30:58-07:00" + "CreationDate": "2026-10-29T18:08:56-07:00" }, "GeneralSpecs": { "ProjectId": { diff --git a/PCB/production/gerbers/snips_controller.zip b/PCB/production/gerbers/snips_controller.zip index 6229f7eb1ce3bdbf542e5f1220f60fcf756ccdcb..fbbf13041f36b52c51f00ed9651c897099c703bc 100644 GIT binary patch literal 183736 zcmeFXWpo|MvY;!nEM{gVi!5fam@Q^zX31h^W@eVf%*+fHGqYqdOK;oVJ@53I^X}?7 z_x_soew4H$vnng1Dl#(S%law-3Wfp%1Ox#@5u>Sjw9o%@gA^dP0s&zH{@GiZ+SqIB zTU$BUSzA~b+R=Q`7I36B*0W33P`Af!w)4EN-1KX>!!aHhaHOxLqYRBV9B3&QbvqL; zC^QIJSJVrmRpUvMI^J#kcyI1UWLep+uhTMpI2vRHl$WJcsg+)VKfjVT_&nZgcYSm@ znReFVV$a*!Y+hl-%TxAlLGS9L_49z2`&q1mYo+4$`*qr&qX5E@TDTfRnaw-&vDcPn zSRWn4Qc`6@+PlUE5AAuXHT=DHXGCLK(BRqr^}%feVx79PA76R)i~K0Za(!=+)fyC; z=zU3RLZ?fu=KGE|&G)_Wq+5&HrS&!5p_oqQq?PB5y&dC~*WbcT7jMqNS4|`=0v9N1e^Hwy*DQn}A zp9(EVPRz5~O>L0B*RETUrP19-MV+)7F}yxlUYXXu+Fi3fuG|Mb4-O~Md3jYF)d$Wy z$3=Nb)nSo)wWi`~r@yd#c71u?m3ETxJtmWOoXmQ4@O1I4@aJevH8-u&WpC$b)@pC( zNlB+k{Io)1{P5t>n(5x$yk^xQ#k1k%77tT+u#k2E@4O&)GMSYV^7KC5dy%ye$9sYQ zo@}9*g>vRpn?UwnxX#vtER|!_lz{wdr8c}9EFHPH8!QvqG8~hPa~qeZd)4ts|41dW z;+|TSJbH6(Wrv))%bE55*`^!B^^0&Eb3<`j&3i7=~sPHShK}^ zezEBAwgjs1!Ph3w7yEWk??EyO+|>!V0`BSX+DuVsRhitBtoR&l%Y~7=_b@rNZkbhQdac?gWP3?)xBqc93j@2zOm$P?;#JO{cU|Se27KElw`T1&kxo zkAqsRaL(UEyRU^7_>y8)gA;)5*DM6p#jQ&xm3*F=ooo)=pnUx#cjJ z&Jr+7XOD$G0Y0WG#K!sAn0?CvvtGrG@c_8z5zJnTD1E~p?Ld9ZC5_LM`ha#QssMjE zUo5U368GBLbbm6ofdIrYo?rTS11j!P%2RY3@-=#q)n(1}wIRf}9&vdQYCz7?f=Yja zrMjrWB@Ltf`n28HMg(Iuh`nc1{|6$6NW=Q_z_}UT@?z2WiRJb~s%e_w$18uebYq^0 zWwxm?u4NJ|PMISCrIUQAZ8h@>DPMf{J3PX0)MX6e@bYCa^ES>8d^1imX;tJmQ-NGL zy}UbSrt%om#HJY2+})O#rqJP2Aij0pZIfy`S~T>pXj5{~6ty25)+oq&B#`Q`0wp$mXmokUFA55FP>-osT21rm|{bD3EgPGv=2liJeKH zKjcz$X(m~p2g_zJ?Ox{vXbI-r*6Bka$^>Cf3FAi1g|*!1iH2E4hW zu-=Ib8Pe*JRW#T+z7{o}O>sg?W=~&kg>R3ND${~)dw1r>GbZ*9?8A*FS5d-IgDHuvL+rTB>6R**U}B}xx1Gr5X*F3nv+oduUdI?H4*YRIi$ zYI5eXk`>s0tDv_J6Umm|mN=EXz&?hhzQa;k-h_SV2m&NLKh zA`D;70O^b1+uvtFM#pX*c*eQ_26SQ$NbK!Hq_0rka_41=f`CUR2bSCYIVgkXvRTSn zPpbRFA(;)7Vgl~Ya8_Cs9yy2z$oUQ=-lH2}*UvF>z92*-0`OQvF7wbiHR~tcda{QQ zwrW=_S99ihPG-e4wGD7)Tr#+8&L6Pn({WJXiELD}Tp=*LI+zsWE3AGi&^&O+BHocT zAEC~}ii1LCmFsHZ;m-X^K87-O+5BXpt$POU)!n8CBk2~CJE;}TdJLRvT1G(xnADMY znD3H(e=~e_y7np+j4!P4!lgOQz3S2Fv1);fx<-BsMO9cll%v4WlSPZmSSl@hd!#bV ze>B{`ikCPtqn5ClL|2j8xbwUdhwQj`Z^eRLUD)PsJ3ZyBz|%Q6CK|<4mz?Z?HI6u5 zBF5P1-s;M(t)a((G`YLIH%8C@OrJCEZhLw4{^soDa%pD!Br_fnAq=y8(d)xJ`n~^K zhl*C@81&_p`<+v|Wy48Q#jMTg-PTarN!;GB*{;vp^Um#4!7;95lJ3Br?mY9t=$>BN z)0xI3Y=mYGWlK_v5V4ESI9OB|KzOoyfI&|W7$)wTICA}67*|9?-wG}ni#{WS~J#>UpdtI8U>>~3+yL$r~8 z`)r!!w8C6`{1+|uIxF4r*+v{9c{7+;kW^dMrEaJg_D6e(Tb&WsNrN-*+N1Ai}WtVQKIT^+Oi{1%;jZ}!*xv+owc9A99k z3BW255!nkhQ1bTZ?IdqU9@Y>0^wz8pgOT`apPNT61ZZ)|6_1MJ&u{f$2=>t2Yp*Zk z*%U(Z4xu9u5Yv3o<5|bA8f`h&fojB{W-!1dEX zL8ZuXNydoK=tQY~PE>#NbCaP+sv(M-C(CEcAgVeB)QB&=p>{8?cb#=OxUT@=@VN_-%JLch9O}0Rr06M_m19Vy+A`JHYL#f_I1FnS}&j%^9$bx#I>(j z{sz?aOiuApTX;530xFSG92z-{`n6r#59NJkkb7TmkbPfrSy0w7XF-U-)WkGgf#BEc zn!d4)d=YI0yl;7%+;yHz4#A^j5tJXM$mEg7s&V^z;B&rTPDNzWSc&5WKncj(&M9^G z`dYhQ<#xu>*6exGDvT-zvPCnlV%ApG=FQczZ5FpTS4lx z9Fu|EfQ1s|+}A+O>{2SE;$i)oWgU!z%7J~ldfbEsU1=>`+)@687$F_{_I6D#Eo)Zo z`KXh#(GM|VL#NcN{29nA!=^mrngn|a)MQxk=;$_A{@fZM!v=!Tn~z=21#y>hW{A+? zBi;-9KZ%gL;?4!DFp!8N!9r-0!g9M_Zf{Ou)bE`xL3+2<;H1SX5)7 zV#)2?-|2X)KrhfFUl!f{oXdKk_yc_T_O2KX3H^-Q%@-QlEz>k)lbDQ1xL6!!9%9pg zJ=eN(S~Vgv2qE$;tYOtt+1s4nM9msjq`R1|v^3+gs8z`KkX4>3 z4@IJpFXJ(1R7M1+5#NLO9SM=6`hrO@mD@peDVni|gI=@VI02+^P}0r@k{%p4~eOBUH<#p5EzRG-1|9TX^vj zBQ@5*Qr)3S5&23R2_3C3HS5QM6$vLNm$&7sIQNFZT#6wS^V~+Gh{m~*UX%XON~uz& zVzS71XU+i+zu5oPz&~4coO047#y9)pUEg?XodKM`dL6ZClvNjK*5(NaEUl~97FDE3 zisuZTesTqvSf&rjmQ|AZW*y1x*8*`NJC(EHT+q*}{PpC+=9Bs2o*phNlbBnX=Vh$U zMzQ=jBepqf_`@WiB0Yg$Ts(B%j*}IjbTarmIame=R;_*LV=izoX{QFnvbPPtV3UhL z@py~l2x80-ZX18xl?X&9fQzaF0Sl-s8haAUkutC-BwUz8TEW4Le)MOs07_h=#_UNUrE{SZmxfdduuQf+8s1>Ih&SX+co0DhX9PH+rs4E~$(Hd~%k_vV7G&Po+=EaA5J;ikjsLuI`7P zY!@EW8@GEdu|^W9$i-9PqL?<}1!5%*$r*-5TE~nhb*_Ugs{z5X?)B~<{FYF7l?E_f zGX2K)9Eoz6UJZNtZO|ARq(~ZP&tHWpNR5QzB^(x3@EZA!b@o2PA`%t}P@h+?JnTn; zikqA=<2&9-Ap^UkuH8d^fOd0;7bH_?g|NB! zptoz(Y>cjC>PufD}N2t5a|K-v!tBiN0fbB>aOTi@)n##P6hw0k{v-Z z!(k?|pVCQh55wP#NECsNUQ^U6Cb}OL_ASzbmtXuoh?X*j_KN!=a|cNfV^k|J-ENgo zqyM*Ia{AsL!a|;=vnCk@B&2Qy$DEw1!R=4RoB66pxw>^ni zZN_hQiGG&^nGG>TS>Kx;-63E|_l*g-*yflgpT#~?PFTvpgD?vAID-tfXox|~sN$2g zO>!H@q6aXNVV+pJNX8Vn9DcC8+7{*-HjHN%L*+473(`6|k`nC$V(2Y!IlJ0?6c0vv z97L*~-9Zu@!m#T&q~jZ*bZ1no(xUxWk&f6U60U$ z`1__f8#1X%D_U3>-fjhQ#q0hO&EJC(ox$ST@;FEnrJB6_(&n(oe;jE8CT4fykfKgjNjM*F1yAyRHgbWPLtO zVHR4yQ+*=h&;t^nr*8TgW=x`}t*5&8#gGjPA1F6(Q?qyjIJj_$00=@^|SwooEx&}h<4DpWN&HdySl;&6-$2%1!vI#9(0 z?PNN94L<{ma9o100TUWS%qx!i=lW?Rv=bi9`P>sHcXEga?yCvan#qwUtEoEv=`x86LVoUa*XB*AfdwQ?ZMR-%+i*B(~to^4Ol?pATh0C=gf91&xM3O33Vm_iG z=V20G0-t~x5OT4nNdcw1_(EGaT!{X3(F;dElhhYy+D%0)i5eKf^a~qQFo8<{cnT4r z3od1;2IPt$q|bdzd~74+74#C5nhNKX5|Z7h`S8VYne^YtAxJc1QG*<0`IR zHhS!Ehq2ePjrVH#5fjX5LcC}o)s)TOUDjZbV4T|?3(fd21j_DW5bLY=H zixk~mYTw(SLe2U0DMx6ORNS;gq_rPaL?5S=ogGDIRv?uKm&|lmAlq}5_)X*0)qqHq2KIV!Wieq)U-)-Yt#Xbl9x~xjrb^@&&T<^H6OW?(uK~Sgy>5 zt)g#+QmH|LQ#)`+07dk0+@V%?}cTSYUu1T5v|y&bSK zZ&z4l1Pq~;>`%-iRoS>Kwy6^+Z4J=}Y~kc4I1vJ^go#-3**HN1JKn1{ipTF4r=m3^ zDzf)S3EL>=ZY$4k_no5V;J%V6x30>!qVZy15D^4orNuu;kV}>TrOEkd+mbJB&mmO) zT<$;E^u@6|AD>lIjh0I*? z@w3Arw+N5}VS0uyxwkz9o??@-GR06xTtn=f&JS29B42G7I(G1gkPgo>y>fS@%O#qR z;5*eNk6snMj`W=@pZS;GGaCG$BZ1Tl3qZ@wp}Ssvq;4L?10`>4uUw`EZS6{GAVN`< zO%XsL2+;i)e}wUSicD_76dai7i_mR2U9_N@Zk&$a|`l152t^L)MESS+lI5mZR)-~C5Q=}Z*O}rNLNWbio7$> z7DK*g+)PkaJ9Wbz&*QIQrj^foRda%(seiY}l_`#qsFU}crxzUfWa*#mFt|?$zmlMF z8cog$&NV4E>-IVQr5y+M!}Qlq$b}FOMoZ-lF|7Ei&kKW_A2!9amv)Eev8hIL?BviV z-2*pIyK$u8w{*tN?)?RnJYqThg)69sL6hThgFp4dCFJG&)VDtQmTq}lX(7V(ikPjP zv&>t_-@`MkNq#g-dqFAV0o-KE6EvyHbFb;ougZT?CSMUo53fV-Uq?m8cNUSeIdyWF zOl*gWkKEFieBGX@4`c!!*JQL?`cWuBfY#0`PI61zXECBI-;h1-AecWGg9%G=n`&0J zT%T80`m{EEti8l0*3ed7H_i|h9RAir+u3lsLd<5$nB12h6AXhpY%Ln}>%q@yk}Z@n zm%=8KJ2GVq`4%DT;;gdFRV{KqWkeol5NWBpemfx1z&Nro2lrv{3VQN=Ct6a^8K`N~ z#7ECfOmFSCx6=VWw?T|O+4{t+fv_C(I-Q6u7=ZmZI1D2PhRi#9RWSPi^@d1gj{_~@ z3CbH&(X+!MK<&WTrlH0pF^;c~>p~b6#4dJV9Ni&xi?ee-q(fY* zB3^-Agn$vnxYw`68A?y5%FdNLF#}nWG9>9EY96dEnD4Cl&S>I-u79Llx}DvPFN||q^d3Ky50Z3MiR=II2tcTcvRik}_77Ea~*cBAWh z4OB9&{PT_Fr!j{wKRII^p`&P}vW$cM*{MP^TY*pN={#hLvxsjwkm}#2NN+V=36gGM z5vA+neehm$G11plTIX)u;SP!33r^!3n9IF4t8J$4`A?1MSmHJdiR`U0zJPHeZTL56 z3HJD+M#L_0h>Z{je&i=^Ct~^nM4OhaShd^9)6U1Uj7Xm9t&c+i5(MI4eM^i;n2t=W z8qeS8>%Z6-PunOkp5Mrkr=W=|o7+!|}=glZ|ZIc0$cY}$1gm>8r9cI-K; zipTx~$Uo4{LBI4nf!wn422tpDHa6M}YI1>c?w`5AeaAouz4NB8Bs&u9^CxVKmInqV ztDqF&(}hvp-sruQk9MGV8dnK3kyvY_+Qt{2!Lj#Ct&2rbHJ_aj4mf)5?U~!HW%ieG zrb90)07Y>f3Unsnmmn(?Xvow!d<3s?J2lk8m+tLD z?p*v{wvwJTlQk*(1S?H52P}U#c9*XntqNIFx1@P4M(r9Ipq8Xu$bP!Zo{B?syPX+- z9z?i+Gc2*D$tefStfrM#e1bH{NNlN1l895HBB64$4s7BQLr`9ilg4%_u8v(oI>2Ri zu9`T((LO@kU7as@H(hT0`Eg{tmXMFv3uL-zRf z3$}zw!1Kt>0ddY3&t-=+dpsuKE|rckQ5dwpN|rz_Av`hXkERMMBy%jMsTWUIf+Y!x z#=ky=2mMmoGSgJTqd9X~Y!TMU4>CV3ywB=Z8SCv6ECHpQjZvc|{JdYU=xB9?!AwN4 z0~gCOGP%@0@dYdsiN5$kVW6{4HvY(0g^>-UK6kADI0Y=wD+E_O(>BD}?+d_zlGuh?W1rG)JC(JT0>d?ny$YKNiR!?v-4XUt%#8Tf z4fz^@xL9O?q))*6Y+Kgw(vNF*7@nX9%@Kif__V8C&ib^g_o7f*y>}7xggoMP=H!L0 zEX9>LmThXv&Iwy_2}1k0ynDVnFIHRWwP>6G)pCtQKFv;Fs>w2FFIDrm{+Lj4O00z# zr*8fLz1$Rd5>T7r_~e>F7CGJZ*ap)bC)-Z&WgmVnm05LE8Hy&MkbxyJgXzjGi&sqc zM{$a_XYYp?BmpqX({g4@ygBy#<)3+68bvKDWO;kq`}L-z2rRHBML=} z+i!b{>-yoE689sx5_iG49l8WVx`Q`Z0*q{@pLDy`S(U}l}`;C}=QfD`z01KIP-m4m#mOc9`;p`}p)_$h>li8w=bKsQe!)O%RlJdKao{u)u z9@{+*$1(oIPy(|533LXcZ1fM~HTxh{w+{h3kI<_GoNI3c`QCnLUhd>oyt%!;_uy>c zGEFuD>+DVNmzYsx&k@aeISHRFsdfhQ)UKb47TmOvtb)&$_gEMNn=hCd(^0oOG~uvv z8Nz8rV_sa(&|xFRC9Z^f%kerT@)}y#!MZTtwA+NKxAES-%j_wohds@e zSPN8bldq{mwNb`AbH~AiSV8qk^$}$<-zAoP`3P*0%D%W{hUllL4k1NE%)C6{W>}s9 zbywp}R%k(HKmW|%ADZ1P{=#g{R4$`Nwk$3-?b?qDLG7KW2e)U<#8{IbhC&}GgHDGu z4oUM#3LUZRfPmB-MzpcfHlslEvoXz)>eYH^9OZQy&NJrP||G;jy30@?bT6W=VOinL~OwS*_Im$L~-OB~b>AZa5&1;EzV zrV)x5@<+M88Z$9Y>f2*^wfPQbAOi0$>V+*3!{CGpB$Ls zL0y`f&us`oKr1=1{PT{m3Gt*RiCcJHJxv;_PBaIXTc7>Csf*weh~h)eze(fEz#EUu zV~^3{UPo&?fnNbNr6JPYKMgz?URB=%vCa&jP%Lwm+Kc*hw0>m^u)ka&11kUpkM&>W z8iHKL5zUm})`(Wd@!t_84@#}AOK`)x@7C47SL217OUx3uWp&#Pnv!3Fe4FHTo@D&- zVZ)fZvB|5iF3X%T091wt6}-i7xjmr5u&}$~_VHdmA)BF|8wzLH=~^e(GBa~N5kF`a zM=s)}&VfLT43w+L>D8A{)Tb9-&T_#P@#Px|K&T%?8tYXX%0W9_?tFN>W4K^f)0W{l zZg6owR1!YtKKgDOYf*o|Lkfo_7uclLqa+J*1wELD)ibR}=#lyS>U>tI$aX=Q7nrf& zeeJTc%ljh00H@M00UwF`>(>JbnVT5eHRvyp=pmM;xu^iN|_1W zY?dVYLsF*mTnY+7rv?K8gwCy?hk%m=quIYL^7@Ez=6dXgeeIf4sX&hK+PKiowPo_L zli+cMRpy+x{lU)m_U&nQFR6AktHR66%hC4bUM6bYi_7zNYmg4T6F;i=b<4Bq{)}~F z!s~H*uK!G%+r!Jl_7oglW?-u?fmQ!)CHft0dpP=y1tzHT<@orjla5D&_xan)?P!s9 zXQo%vi=Bt#wzj8-qfxG_g`FhjEYHmMhesgZ$D7CPVQX!kRmro5)2r*ju~>FK@@QxA=o}w4Rw8+uG=?i*dCF@avBcGWZAY7e|}UGISN5ZB5JEk9)2M7lS)% z*J1b9#k?197u&~n&X1!-CnsT1gRLKVJ=b0x*rV*)pGN^V)4cF}+^f8|y6Du*4U1~U ze_vdy*g2=G#N&3qe86vg{qp8`ZyV_Bc;+;^y!O1m0$7aSU&r$^J2~1j#+$r${gk7$ zJ6)ciF3%rpYgvONI<+)3-<=$*pZ8vazK>S6PG)szO~QZs`Fb+C(c$jSP50bx9k@3B z?(x2NFp1u}!K?YcaDEJ)R&=*@W%jnOZT&Vd-PGE?vkzOjkN#@uHFp+SxE8a48?Yw3 zid(QIyN;W%*1F?$?wKLd`eJ&pCy(d;(&VO1H|}+CjnAv?x%BFKYpPY{Qs8{idG6Wv zvhnD}`(}HA?Zt)nyhH5l&V-9U?gcR@a``}ki@&#%XV=6-J^6Zc)%blaNJbfdzfmR2 zx%Hv-ufpNHSpZFcBSCwImRE~l$ov%p=3xjFDIo=s7b z3e&K|p48v=2BI?H>0ig(e5~6-Z;Sh`rgX8 zVRbl(#j4E96w^cwG{VYd{!NDUQ}j(i+-<63iIyt(6}ANHYE~kzU}G7iHiv4ZrKTEq z%bJJPlCBwNbMg8-T@=Qw?$G(nuLM1h5!FXePFI>}!l^XcS3TNyE)8Oi2`6%C> z42$?H0jdTssdlL{9H`VWeQV3d`H=b~>3Q?{0#`#!lhq0=73y=PPkj-ie8=?gqhhM$ zY-J+hbQw3Sp#VE(_xT1QUPqnbEA#&eON!FO?#yMsE;`Wzw*2@$vQH;<}|`F)ih16 zxS_r>y^Ldi)FZJyU`TN9dQR1N_|vMiO-T0VAe}TklY5~G>p!+RYq5PHfI}ihuYpGVUr8?u{}uzg$HAZRCd!7GFT8l&vu6N#Ul7% zjs>q|-hOM)w}FJ9dJZaQTfo zm|&)zAIucMF<`;x7)U8F246_J%8Ce)8CZ6jLL~v6lBlKws-3I5skUE)OoAjUFv*qk zm+~B8HEKmp(xk^JOKLL@<0a+o#gA7Djlc_tT)}U_WV9;zxo_hZT1%BehfkX4ju~9I z8`WY8SI{~X`^hSeGy2({M)w3o5qAz*Y2acw;FR7WIRk|al8&Mw5tDsRy{363SLN2^om3L2dcWDlvL9B`ECsF;#^xMqlB!0mhr~i2t$kXGTfdC8J(4FcDX4< zLu>j|X20y`9<`OlPt*O)p_P;q>?d#L4<`uov^Ksp5eA1;^Lk|)D%aK02A0FF@yr&Q zeoFUH{`FTt5axFCml=1)o!;EwcchD>I`4km$akuXY5crF+yuR>dX*usly`MgAN4QB zey%L$31~;P^Y!u?Od@)S-?6~*#&auNX-j4V#f?F?o3}G zB>PZ*#v@Kb8`i@K)!+~e7x?FQ=qP}9oc~LUjsgLYoZqU&lpaMA#uyL?5+e)KLJ}wW z$4K-Hk?QWo(%Xq)G?RpDApP^^I)Lkb-JKzH#3_6GyXOK1hC|ej{B6+Je>`^BU*75P zTczAjWncc#sxDe+a4}S)4Y#@ObaFFxj5ns1VUoG&^Y!07;RkJ*GfYHZOK3gD3G2Lj z8M3N+4W1C}Xv;mVTFR~Cf8m&*;Tp?N7C#)$L037eHf*98p0Mt}oM$=0(%YFn*G;da zzz5q>*c~D4Q;k^%TKc=hcehh_4B)`8|JaTNe>a$b(w^8J0M9ali)_ni?#O{xk*|W& zJp&vHCbY9MS1-ZjmOwytAdxgJ~ zTr}3T27kr5^M=_7ZYR4dTAclYAKuQ`Ypovz=fQmk0{b4#EpkJ-w8HfA_3rDivruK? ztL7}S5x&c)+j_9ZNUZN&j0ENl@u%1rVWV&j24PxE;-v5xiGd+f{oUBlcEcFW2LHVI z2;noF5G^jzK+et_VJ{0&l@O|sB!a-c z{8o)vaTZsAz&vT`i?{Fu1VSgK&rm@)O7j?mAT1+EpS3W79VM|4;3sGP|7rzTNokjY z$VO_IKV%3vAq5d&y=cs6INvSe{D8`P!WiJ7&@$ zI;P{pNMjZ35x%f2NB zEoQKZRkIKrhpN;8T`jD+nkr$FQt0la6X zow9-@S-{H{e8KtU8-I3U0s*29z<>UD^X=dX5A2~DMqq$8!tDc!-){0t!b9BQ+npiS z!(r3n2IL#D59}OI+#rn6eUq|)fTkJ_8Y2<)%VkVE(n&l4BN_#X{<_@MDfbU?P~x{J zo%mba2m3>$3ivG+5{doprOE<0rYTj~@4wB$-lfdA0z}<>!NTC-8X&^7z{E-3F%n%v zq&mAu^mdRK&0zn$*)#?)DTfLKj@eXRL7iYChG=IAk%{O*mw-Wq0TZ?Z@JN15+kZSZ zx@HUsG2CA&wDeGc{Z@_-TGb&uV#u&SU?oOk@C}A`_yw8$)3t^lHsjxe9sgO6>)@1V z*>{z&YES*~L5`Su(i7PqRb_4$xe2P;A3?XSzl^kUCk?3XUr#dooxm)RRTyi4He3CQ zh6Ux5!cqr3UG1RHu=f;sm9})dZ>kGG#7PY@*zFmQ-oIBy-T#rC01)V@%ejDhQqvvX zi(Z%LbfSDbAnzC!-*qPaJ<#rqrY3dahkiyZn(KLma?{*&FLE-zu-qL^E$Gut{e)k# z7tD%nm+FN#giml+zA;<^GDK)BlY~I`)+6_14ev|COo!Uy%@K z5hcBP2}hA zw&n@{U+nUMB}Hh7NnT=)+<)?-_;>dMwfw4i#!pyLTg9PMzk2D4#kmB@{=j`j1($WcDGO==FAZ&`=i9T-d4tHWNMw}T zU}C=i(QGIa%z{_-#CeKgl{acZsOtt^@F=wd6|!Qj7CWn5(J=AjG-H_~ZR1+AvnQPC zzRZE5o-=)Z)(3Beh}tn37T~P5;(lJUElTo5J!w#HMfUPZ3&B0R&sWQe4-dzc5va2t?R?ppwAHI3 zjDjEnXHKcQ%~CTclE2oveQ+~#YSYmer$nSKXIJ%IVlI-c>fQ%~246~d?dC`mCrmbz z*92>|q>9z)lR`zNZYgp1bzz;8tGX@hfePGEFpMa^?>_D>;h)kBF-ebJI;ig#+D#Uj*WsW=!JE4B6v4oZ4yG6pL?>6My=Y|e#PxWcE z!x;&!pPg;apT=cH12r5>Q{F9c-pIp(jHHv2ZWqaV0WWW)11SJ?=O z1^^S!0Ki*ZVFMv!bg@$yh)PHVb-)?78;rRNK&&|m{?1wC#s5prBK`}wG*TFSWdb4p zCVuPebu7}Vx6NxQi2wi(=3haGAQ9F+ zlQ3Wo`HOn1$_S7dSPa;rrT{vBv87ti=3(X?|IjJ86b(k{3Q+)N!D=#!nrF>Om6tQ- zo~BGG+>ig!EHw@zE_4HP44K)c<>z`#Ug@k@juN+E|9#GI1}&^uG_K)55H+nW(-Cdw zkS+$w17gNG8v~?+Hu-yhNtmAfrW2 zw6OGhm_cI;k(hAV_hf_VKMg-(Ltr?xEsixe_+o%-9HP;1m=UZ&{r`iO{{pl$5~07! z(;`9oc^U|D&4~VY_{twN=66n9AkfF=(8gh~D7^dm?%NF~m=S?Q_~1~1P|cqR=IcKv zIMzo38O(oC9_yoMK8oMyC*Q0^Uz7wBVtVKgzEY2}py*HZAHtRyA|U|ykqG)>TlMsJ zuO$lyKp}TPf%6*;{bP{xzdZ9d{|T$8g6jT_fTq5zKTsyoxPFY082!(4ee(a?bNz^+ z0%}SV{O0&yh1A|0Qy1yvdos`V0ItI*1aW{Kh_V%xj;)YMfGNzyL)x&}G`cG84X+Uv)8q9H64E z5--tO$(IH{F1i^8=6U;?I22|CQ<(kPO}OYOeg%$!>E75niJ ziSy~y-KVLu6pK3cz90N7q}z2eqzVuu>q}^T*H}=+=(h_)A<@=tX@UZQpj7JKjY`-K>Ci%p3bfPzHD6yVS)jJsD^Z`nw63 z&IoRfo7+WbrWb)boarJ1>)D?IO9G@DsO@TZ&QdbT9=kLbE}!fmgNT=eXbrIdyl^{M z80{BU;oFtdkg#1~IQhj&h<>3DOu){EL~R~`s09DTQnr6}G64O-U4CB!_}Tvp#vuH{ zH2*Jz6Qt!P8UXl(NFSR`n=2sVl3dz5+_(WEZb()hz+Gy7yUTAD<%6QiPBji&!PkQ(JkWG*qESFEdgzb^EtwgV2l=O7^7 z*^M@$cI+U_9DD(@LP}$@3EXb2%p3rl)UzT|Cp^5}KHg!U%L;4nXbrvARsajrT4u4h za$W=fF5Y`I0v^Y!BIu(Snv(h#l6Sh()HG%`v&K}nMpaiAH)qGXV;UJ3SZ{#Mq2>w8 zG&jN2v4*GqK8ws3Tfi}zRn%O7{F&KL9;BaZwY%^@pOH=ttKPdaA)l#F$Fs9~@uIh| zs~7s-P~6lG{i>af9xP9%b1Db5vbXSS4uW||-O>W_NARc~D-P#sI?Y{sPKm8uCe>p` ze>3i1K8qA1Ec|~2RsJ1<`QI6L-=B;dKx_V$asN}AqxT2n4*5-d^!{Mn01QO*i*XaZ zT+@9pHTa8YQ2xiP1 ej!=H2-(088;8gG_11PUjY$;SKY7z$)(v7Ql`>)4WDTe1zX?s(S=GURy~& zDeT*DI%-FHe+2B`=Sa`;2kEMU7?{8BP}T&N1ExS&LBdBqmAKl-i#p!t52v52=(@GQ zpYcyqswR8ZVV>AefiXJ}-K0)ss*3`6Fx-p-HwN%kQ1OdKskN$1RN=gP^A4vuhMS}B@?qbX3h9XdYS z=?|}Mx3au#?w+1cdR)|n>O8%hx$a4!@u$ztkA_z7wr_W*TW`9vZ_dK&cy1e~ekB%! zMf!`%wYDV_y337spg8JmQ911^QA?Q45-RKMZDOU?c6a+rd7b#{hB)vWO)%0G5+C-R z6@#;CR@w?co)Tw2p9sY6Tv;34-S?~KI$w9?-!1w4NOlI}KKXf|-$YWRbT`*Ub7Q*r z-e>!o3yI(&1K|)Q$TBhLz?L&w*7z*y#+Rr`GvTw^iZr$2vExr2B$W>8Qb>|5t$SUp z{Qk`&S$=G^1G0pPbHtJ`sL`SKDzS1Bzr)4$?f5K5JJI7d*?Q&Vtz{y}a-C=tbivWn z!Simi_PRH)Qt0Jt!u%ty$+s}-DD~DyuldGX_6k?+&T_$Rf|%FN;ceUbN)Ok!-rh#z z18Yw%#pW|ERt%h)7PW$rcH!!FzTr~5JuUkuD*B%k* zQr{}{w4|j840k-@JXdwG4IkO+8}IuY1ri7Mo|=NJ@n2tG_Evg1Ia$m0N{Z=-qHPx! zQwls|jOjetyqxZ?e%|J3vu+|723=7S)<}EVbzqxg9jnm6r%}V07uY_vN|0D{S(J&G zt=Akx9mqSne%n_Gsn_;A^?aA~kz8_~L;*bL`%z5CH>bu)Y_h-=-trsc4>No~Ycc(} zMY9ejcB2zx(n^%P(m*h2&Z`}Rur1aM<0eoh`{Y0^0u|j1mmCqr;`Pbjpe@#`ZOyD2 zA8XMi1hnrBW)oMpw5bKuV+Wre{aB+qIK7t7uBr`~`$L-u`|m>HDrH{IyRQ#|AQS7G zBu6VTd4Fu6+T=Q0*9D~sJpAllA}YSKbN7M>&D4fb9~$_7*!s?JIKsAVElP9}on2iL zEvxq$HV6?ZMD#@jLG-#rTZy)a5zOLQT6^j;TheY5gB?|Zz*@%^!8=bmz3 zpn%SBCTF>QSr;hy3Kl27c6hkIc$)!4TDQEc)r?31Fm%1aWW`8A^rq(2DOklpV z?-H1gFK)sZ2*vho)_dL-eh+hikKCo?ma~&6AiQ%KO4+-VCMzQc{cE=USY=JDm5WFC z#V1QVTSHCqPkF85Q&bUG3xO)f>0k7d)yB^r!IEAUfR4BN10{M#LxR_35{{RCI+0Gj zOm-YHAl>IP+i>Wr;M`I_RW^vy7$DBZB1e$)MWX0g2gUR*kdFIUDcca(gaHti>^pG1J;r7J#gG=ZjFPH#3D3}NDepK zXJ=17wJ$g|({PE^*t~l6fr1h5j~oDOa4{H+LK ze-zyeP;7k86Z)wsC)W2x+y%Pd0FEbD{6YDI@&dC0@<1#6-11MJDZ^x zk)+GxUinG>3IjQ1D%E_QqI3PCk8zY%tLpSW>iOs!#;oN2H17EE_i$WVxK`+Ybr%}k zTvXTSrk08cB}%90OVH{0g4tL%e~}$tW~bGi_*bMrf%ekC%HoSW?Xcfj$qc&2W6DTy zWZUc5R|Y;+Y!MBhQ~%}r6h<2Q-M$%K z8agfEWyU7nx%xbV3bDU~yB*wlJ0+~)JiyPJbm9rMQ>JM)tJ`&m zCTb=oZs!*^jC>}yf2zGRuwzYmYTZ5d*Jb=eGyUJ4EdH3&ADVSjJPw811AK|E<{ae5 zd%c(T+jY3|F%9}~?|U(z!apVt4a`D*_kI=aY$|TP|K(xRm)~YK;^)7h29U*WC>Li^ zcm*sw2C1#)c@XFK2mq$!2~|ab*uM}1N#xnU^q@ns>p|12rinCdy6I)l!>BX&v%|eu zsLkDBYE5-n)+9;@tK~X0hch+u;JJ3u>_oqMQe#mMedR}OlWjEY^u@0^TCpDWBNNWw zd0JaXEqLt=I(5=A`eZz}pe ze-sxJJ4(R9o&E5KhHAsSFxB5-MV-CC5{2+k)g^5@S_2g_CiC0R;r+fe1!DmprMqi| zHprYD)KdlX3wOu*wlrSdGFWSdk&_HkSw4Spn1A4Z@L)+>oa-HpEz~O{h+FNMW<4*H zdj&f(R$s+nIsD`urkTiwJl{ij{vMIN8r~14;TB2GS;lwZnwL)4F?BVZR*VOc`h5R3 zstREU=)xAQug;frISbE zwoujgZTGwahB6e+#h(TMJ5q!Nq^&TRRn7=Ay%~vDpO`Pn0 zRuRUOh)O0t?N3T|Rz9OlAL@RCob*G`3a^P^-q{B2-&dnV2d-K+X=C2f+*`tmqJvC9 zC)D|mRnHNQ#45;Eie0MA$6RIYEHsmu6eL^G6bsF)1+0tH`GZXlYNI4UjvJhBbNNrH zJ3rqbW06=90Y@?)GDi2Y%j4rQpya`kN=-KYl7yp6Kb<@MH9$`Cc@pGQ?(gC*h|88z zStghs__JZlEM-!XTs3A_Msj@oM6~mu^a1Flu5_Hq>C~XO+Clivr11Ui!!GZ;~gNib5WljB` z((^oHD}@p|6*b+p0*zB(=8#?b!k8Tc}Lk@Z0_M>O6ZCP-aN2ej?1okiZ{6c^1HeJkoD!*_Q z7T8V}>gsPuPw)_2I*XbhYaE#WMpA6;LC%tw>{0w%&MC)whdjbm+EORs5tGm7?-Fqa0y}q5Q^Klsa+-pu3B_cS`l> zGl@&+!%PhXACLFloWqW#zx^p<8;HXo9=rm4D4SX0*#?uFmWu08xjo(yRiU<&YbPZy zyw3q-Rji>_MEP*%j0#M+;h--AGM<$k5X!CD_7vOBqF^*nc6K(_$b_n=i~OqjBx6`( zuiq77^eyO&7kEI~i=PNhJX+YHNGwrq@xZwISbXq6hPJ<>fR}Xs#izrA-&VJ2U48sm z3$@16x8Aa55EGi-6V-R>*#JFypssE6GsAFNcoUzi{>!X-@Nhlk#<(nao(RY8#!&$G z&TG*_l^_pd)fcK2UnvfIlf{c|=wnqigq+?nKH#wN6-!F>NisS5(sOLy^n+q`qk@1!p|>m5VLo1&Wf4R6*|su z6|RiOyD&Nk;KrO%8cVu`2^C zz(;LX<9xLJY@gTqO&M@HjGPvym_~VXk(xKf@Pfh`b9H4RRy&JWX~$B?++sTVmGdsqYiJ+hp-es+I573W3SxpGjx@$ujJ-O_^i$rW*D${LKIry-n^ z7&*xlN|iI8g1hAb&8C08YEw%2r~J;v@-LovTZ{qQ-K9UC#sR6H3AWzJNb1nrvJG#F zP?qUfixWTfc8O2MN0{(`d&645M}9aV4jFkpU1iUPvoZ9V?N7ZaA!4sosn~k+VeQkvgENJ}#bN*d>ry=%J6mUqcb1lKvEnqf z$z()A3Yq39pZ-M$QO3*kMdMk{lQS6p>((t{|8>ITEDEbNr?UI_%w*N=7wZywPoB+s z-g~yYY0WD>(>Rfp{v`kD-B0Iwa~CVQ3aBY}IA*65j+#!#9ITdJ9SFfMOyH%PkpSCo=N&xXINMbPF@Kd?7CD7Gz!+EaB<$}YUZ&G|*ON-!~&V+>R znU3a}jyeYO4wGxS4o7dcVE$g6?WA9w90I%Ag=0ppE_UZIhb9}6Or)qTwq}C)zaWq(HGydkGq%)V0KFh3g^9Z{+M&2tMkwn%(}zX zMX$-#-?^)!8imWj-MGu6O%wE9%l6r+cl_0HrRCM4_1xugdh^95y~1Tpi*NZA7=HFc zsQDsr6gAg^x&l_1G^2W3F4rC47dufVe*5k4^HU+rUm^HqjRJc6TtF;7$vr-dLZcL{Th7UzLGEHAIi^1$RpGLKucfy}$ z`t5I)7Kqwjbb~PGye(%dH7#e|^uVvhCg!@*FZT*d$NzSk2rB5)UtU!OVMbnFt+&E8 zj?-x{BVVtoYTq|t^y;s=$562*eq*+u?p|SbG1FezzJGd=fJAqdTfTa9hI;cbb-5~C zoqNKy_>OOmKw@;JmiBbgxCq~2bO+6{z2=3JeiHHsVkrOj$|0M-w@$$lZ@4$xxvAty zciMoDy-t$<5o9xIuu&EJJ^uqZBt`)2o@Cz;FEFg62;Am;SL&18kgMtr#IU>W_(XEg#`U&}zj=L+2&cN#CJv>0hPS+=t3}rP&*OR& z2mjinTkYt@wq8Ud$Sen3O-c`M_Q=Abx3kNsqRseIvN!$7ys{wBfkwgg@ZZj{nL2gh z$N4Xpo8ww%*&vf*6SUFgY{>h&QU$9#fe{!`mG#|Zo7|yBs_0Ced@{`E(=2MnUW9vd zwb)(f*tS^>PowpjpCRIW+dKg_!)_;u42y0jtsup`t@n?A_{kX^W zTfxU8y685FS}ny8k5Eg}E+ZbJ#RyJT0vNx_C2cf&Nj^z%k<@&W{+Uzqo#0eXDs3!l0pBOF=M<2MA_)YQKp;w6N2*%S4?OVI=ys_y7}N_A)wN+XCn ziHbH6jy|ovOvp^KDQ#7(M>xMbAq>#3vsmsW|A^ft2wK%+pLN6gj*%{g$>5q@{j}tO zOfq-VQJ=6E1tQ8yArTd&=0==J#q{B172Fl6{$$e7tx|Q!n)De8%%PJ0Bnd%Qty1v- zR`#o-*_|t^CGC9HHGa->eI)z-9OKwwwC+SR*$K-<2a>Eh*2v&_}Zj`@dR`ukMh7l zjc|&h;ukPw$*PGxs}N`O{}l2!cuO^URmWP~k2o(~#We}zueS+#ST97mUH zZ3n+L_UOtB{5Qb$u`6r8GbQ7S{asq5nO&?MHKPwP5T+K4rJD${3OPB6E;Zkq0&<(L z!(H~G%~-W8IlfC}X2Sa@2ADz#E=bh~0blkRrim$&oK%K~dvVGTckv|;Xl>FQ4XXTv zh;6dk1FgfQ$o_B@H!ua(pKJb-zbqTL%^m9J&Ob8{jC_!Pux`eMBll&cL-$e_6 z1Dnbz@F4NO`jlUOfk-Sg<{Z60*JU8(WL(+Kts!dQk@5c}8OPXdI>BYAO32L3stV&@ za%Dy8iqGW=ix|14>;xE@xQ@|H9jkbxP19}Yacp|KU`^`s_Ama6=R!nPGMvZGhO@dbe>oRsr zS?STk;j|>Xc(Gf#Ifpi7r_JBA9!7)2Ad^a8oR|Rf{#n1Po0Lpek>e!@o}3o@e)db? zS0ZVbeb(v2j{?6~Sfblzfh_izWrLA+P3DTgO<{a06}VHc`)&kXu03Aa_xar6gaHE~ zSW)9&2KwU$e2~@8dKxp33>r-DEJY*sUJU|)5pEwNz!6Bv4$Qs`f7n&^C!|@26Vmmw z+QPS9$M;#ksa+dOeu_>wUr%h{N6aT%xeCK!-W@UFZX z>Es)mQk;$Qf8M3`zps>3Q=8sD1~64KPmX%slK(vnIF9kp=Tf5z)Qp>%_vxd{<@CG@ zdF4+{A2p=l8v5pPomWcTtVj zDgXw^H`sk-!h8NWtE9) z(5$2Mez8+om9Rn3H9l;mC^Xz{z85fuSj32bxUa^cj$#NT8=Fr?Fb7;l7soSwevTBw zRlrIsH+Dc}sT;IeV%sW&SKR{QzYOJ)-ETO3Lbkc(g?lD6rTsPxWNAjWmAnAbKHL)R#m*6E zXCp4b#Q0PB;J%$IVUsQ+SLNi7uA$tpRW&}5${NvcHOm*g9Dz;WVx5%U{^>Gx$X9b~ z`#nWmihCNrDGE^2p3GAojzAr*DGtc*$O$EEu40)_Sb{xoB^K4nxLlI(C$SMG^pyuE`|+-u|4j7eCe6c&O3awfzx z^UveRmEcgaL%dI6z-+PL6+fQVM|SD|JiQYmEu-$-t)gb6$GBM+yCn@)k>j0ut@snN z<*o+l`HAu3YEN<1UfmwKupL^nPEaEGYO#LBmgKNV zvI&1W3A{d{&Q4zKJ)#!n#Dttaot01vh2S!p%f|z{%g$iDdQ)Z%3rWMSiXjZ~_M=<# zi<5uXgFmjA9yUECv|Hr>=GmrJy58uE)FFUGs0$g7d?pw(H{= zS85=ug?D*YVKO#Orjm0r?g%nn4}E-ovA>;!n6Zqkc)RV&0Vk5+Xd;7d?@Fiv!04d+ z02UoFdp4C&rFp6@t*_09dNG>j4+N-O6M`$=f0p(G^j@VABagj)@dO}=Q1TI7VCE>$n%gifSLaN1!LKdg;LC!XSB@#Va<~Ab$df}qYh13MXjzJE4^2OUqGh-rQ#Q3%8Ldkn zY;;L;w8L}(w?|rvZzIdY9Vlb+OLXQG9)FFdph)^euQPs!ajSk$pP_q5;l~A# zU%nfcu7FC?K48aXL{qGjZ)8e%D`p)HP*#WjOfh(t2@px!><17jH6!evtaSv;ZqNl& z_w|sn=>@>i81^PJISl564$z`?WJfI5S~yKp?fVH2Tl7i{vaBiRM@uCYb(+qI@)9pt z)`8Lz@B5`l7adhKJ^UbKUzSfKUBcA{)&6Ai zK`vC(C(i&u7;fp4t_F*O8+|57(G5!-vLlwrE3^6Q)gnTK4^~cecBQbXBRHj zf{ZZyrv7p6K#C&zVLPMm^=goBfgNsp&}hCD(yola<)v8!S-mzEJ-rU_;0IE}bK(7&jukeg!h_%+ekSE3&5BWnk>F+bUE8#BF&*WY7e+O_rFN zBB2r7jWNztnoivKN?$YA&&5LFP0%<%IhKb`P*t@i-A3AIU5BSXe=2()cdVTACMQ%+ z{pM%YGjT<^mOVgSK4Pd0w6=r=O=!I$RNHGit3d+N&8m)x(;{iAzPW|O0_z*Cw8&sB zY2q$ZnWTwnPR4WV&-9ujjrxlzMv8#k8`uqpCBg}td>>`i{jc_a5 z@DmPAlJPb*EGt*zLw@4|#(hmx`Rx$Qd~{;B-6yRGN!2`X+4j+%7~m~UO^;7&bYpuc z6nk2{W&M-~+|*ZRq$!1G6v&!VB~IEkKWE%Cgd!ncHKSeqf%jc%>?w2tD65Ws<&her zg_~{w@u` zmEtv{kgbB%AwA;L5}I*=L9cyFY6=IcbO#pL1GgVD?g?%SY`(TXiEb+q>S+MVl%=_@ z2ml>j-Zpx?_2I`Xifu#Hn)**}R$J0F*!9{`tUyqLC;596byItdH3!!?^WV^s~Zj{~${Ia%i|PDab*-viRU`6o3l z?`L9xJe&X^dfGWi7MMubM4YJyIwv@qkhQD2;{`vIDU(eaN!O#GP2IQ>Rm& zQ+d3u<`7{RCmu&a-04tcTNb!HcOy7n9-yLEKh-P_9OBhrLxvn!9A!R>27ssw|t4U$Afgal|@9t5-TIu8y`6s1ga@CkZB0Bl6C@=^40nBe(GkFO`p4CpEb?sGwlzs zhVDFxD?wKvC(a;>kRR+Pwn^p*{$$(Tm0}r4C5NP?O=P&GM+vB#FB!`!%QiE~m;Ygv zxT$Maxy5OqnqreexO~#IXfQ$tgfi73(vG^$qSyA1bL2TMz$!gb1Tcizlv*2wq+7Xh zhSa2w!-^EDJT=yL5lYA`mwR~9eOQgOk@b2f`-VnqB9}J;#N5Wa3Q#1rqKlw=X)AwW zFulGiRkpdf3d&nOxMo+Nux(Fl_*xfX`+0i4Q6F13ADZLVb-wC0*Vaw)CtJdn(ZYUM zdz&}ges-^u)b=UbSQMLwhImwIb=o9Fj>K=04dgR1jvEAyUhsSioMM^|(G=eI zL-9>)uff226=5&|m6T`b=40+;r+iq6ZcDQQlo1xHI=aAypHn}If42?C;8CTJuyvaf zz2X70?3US4FSwEbJFsA6n#NtIeY4v5PBCO(WErT)`$(^Q3#OkB*%F;}&qRQHL{LHjnqI`;7{Ml~x0Ia>AGYWXk%T1= zD5w~pl^3K=v;jq--mD36*Ljig_Etg(;mp2I9 z#=mP08)}o6d0_z?I@aDS0u0-OO+E@B`F^QcOWhjBeTg1DrSO(o;$yt9t{$K9+{Jg1 zGqk;#R3sKbRxR>JXe#uQhI8cGiVG;K$&s!^Gjjc9?CE^~Q|#+c%STSd0vwGQ{UXM# z#PQj%_-pDww3`(Lvy0jt0a{T9{6tf8jW+EUBcw17g0q9VqasbV~yfKy%0ifX(n- zJ@AidT#b2qQI0^6eQr_UsdzY&S$&p0iy|5 z+AyHt{6>#OuPln4Qu0XYy*c)d`19SF2e8B%0GmR}9|6spJ@#vaZ7cyQ)03kaF!S-9 zs-uHB?uf230Pt}cfoHkcR^eYg;R?6(xqgB3FQGbztf!Ro@#%$X z)SHtBL}hM+*_9KJH>bEWfvZJCIun759uI!M3ZbEf!W@kYh-bJ@o{`n#rRrvO;M4}~ zMiD#8(G4pOQHpRGSOmmh4F@n zCTlHzwfyX`S|af))FvBhf*^8+{e{#&U`g=o(z}dmxja8Lffs(dl8`&%8rhwlU8kL{ zn2YYV8k57xjL!!miVF^>^CjYGSVH&4VLu)=Q}#U-vJZbw19Zm>)GiEL}9h zdgCmft1ZUcB#~Ld8ovVgR&%ly3z_;v0=MTAN!ZRl$+r7#CgR!kt`?&C896@@gtqH- z_;k57(jt>!`FzRKaQwv_W=9=3ooNTZQ`ed|P6y}i(v&-$Hy)|I<0)Fn(R#>fkPG7r zJQnqYAN9+Tz1%HG&`%kAWoR|@X+JKyPDpSc=PvuEcU5BEf$Q@#-VI_!AtaGgGW$fi ze%rHehm-sGS~ELu6b!!Oe9DMdR~XZbYv}lF#7YP)uuqN?7LG%>-T?2eql#!mwwdjn(KMnvvp@@y->HdKry}S2X<1&9&Sb_HBEx3-crDv0EXCC@VO|QbAuO9PP*So&|JBB$Kxsz`ON%v z@m7f;-J4j5+N&h*fwMCq`04gw3+9>o--@5I@qYP@uW>FX?@}4ei&bbpyvK<ak99b-)osJ!w>LSUjJXLxr(`*QCa5J?DS`=#hJOA!&LDxwhA7TL_VAN3m2kS{g0m zlE~o)OfB^)lbcBkBReYcU`zMRzN)@*LRe}{CfT^N5QOVD=7hIm098QZvnD~-Ahlbs zAFRWSV<2QCB|B>+5DS53^u5@0)7<-La#=(XIcs)qPjdf{8<(%h>7-1bnf=<~BX!og z`bARcozU}qo#=)NWKpM+++3O4F%|CA3c*G`53MNrrK`GVKa*cKqJr{whN5Z)wa{{j z9T#Lh=hnCi0W6s|kBC|DT;Ed4Na&Vb#p2*}Fu8i;?y*8TNMXZ7y`vyCHn#%Fa;y;O zCF}HMkYsd;*;xA#Xmf7)%Sw!IJ9&C9hYGKpf?u2uEBnJ2ceXkDQe;0xEZ=G{8qZ+k z0iUNR$~7+x?(P)&>Eu6-!f%d$cD{GE@0;NFlJh`xF=FOZ1lMMigRY#aVzpF&mlgTk zky(d*vY1aVjlW!&)h$Gr*kUj+2sS;D74)B3Igw9<_r`A!Mi-4tT$m61aqO^`KLK8z zHsauz?HtwRw{|Zp9qew&IVHwO|DP##ioI%FxWfhwZO@GNlq%gRd;Qk;;Lr5S4@GN{ z2-&e_Bw)I1X~irrStYF9_Q~f83=^d!T9@-;{Jtz9UNJnC;a#4I_E5iZER6eW6}B?- zq~yz39q(VCw;vrOO(n#}25UjbDo^pt-$ZtR%wdGApg+2Q^A z-#C#{!OWvsh1BZeiu36vXBDl8S}!kiu3W-_PF`S-im!S6y%7F(&hL+FLqLUA>c3@V z3N^gyLpZg?QkvnfY8*D@rxi~$@sIMzVj3y}x)!~u6X-_UJAfc4vL1Fcu=x7!NJYe= z{nS$K_;OYk%rlOVc=tkF^wnwF>8i_p@suzz2aQ*9BOwX*K8X!7HTU4vE@yNmDITsY z=i70u8V`u9?Faa;IpZDoF=0FqwF{!gN??v51pVS4>X^ULSDtGBC#gc~Yn&yh>9r9+kA^{yia`RY2TlCsn09lqlbmV-)ph7{A( z8mU38;QcJnCOck5e>cBB@>#^!n^q%?<_cn|hDHnOTw~9UcoFFX;d`U7W3pwWz4pq8 zLH8I4;}_$MuSFUev!N^jUcI9Sy?NjQ^%>}=P6tvW5tuckw{B`KD2%vO)G|>~tB6`C z2%w?y^K>OSEyW|LByNu7UCUe5M8oe@3Cz=<4z(xLHBqam4hnYrUl8nv5p&7s`~RDJ zJYpy+uVni+{qcqQXZd4-NuiU82XH6Su2o9~%6=gh>bf6m%W(zqx2U^X1|AlWq#)Mp z8jO(yX&DqN1YC*SvTQoHN-w(EziXs+$A0tVoDEa{8p^@}^Gei@Sq@H-cG#tsdc$x= zrCB75d%K?mI-f9gu5D!_L^Wgk?3L9j)4HTA)qxh2Z>YK_5ju3&YL7(un89r7y&5@r z=x{)#-8hDmWvZ_L9ZX0RQ{u7o&;GRrQG{uPCWv1O&YJxH$~_ANstX>0u@jC@hi#z5Jjg z7n>@x?tVGA<-Tfm@BC-P8f&{ij=QqqFX*c@9QRcd;>*uSxrvCDQoMZDHn|0Y5p?86nchb!uT6wM zrq3Ex<@ZXbEg%9mpYTZklU7Foe5)d-nsKob^qbc8Y=)ozg8K6fUUjg#FmGeLsIoc; zOe@TbwpHWnQOOUJH9{-rv4OdmM-R`olQwY>bIKiFvH?5Ev~P4q|H9~Y?8b~M$KTQ@ zZ9OO1VYrR-jeXXM(RiJ++*Lw*;=Hk~G4XDTnqVf#IyEf?b7oGo^O96k`u2pZ7diIPp!b} z)d}jdd5`HqMzR`m?~Vzc#c!FLFN~8)B{&PTCCLmZ3KpWut0GmI40Wn~-b<21qX-y7 zQndO+21zFHgJ9mWhl;?h{Zs{=#JyH&NyMl^Dd7J6a6t}ZyuCy%>>6vLNDo%i>oj(n zvQ>Y@^DN*Lgn7^lR9CcJvx8{D$K2u zrM5WiEIcIXWUXF2hbSZ>={<2-R%GMdQ-eAvLMO)4D37D2rCmFUnN1Z%0;tx4QSo^D zHjl`@CHj*Lk{m^~(BWQErzo^VW?OVCuAxMzp3ps2BanWlou{{w3KIR0t1p9Od0W^T zX8gO}-=e$9^L@vSeaD-LByVf`!W41{f+F>l<+QY_=@$ndnt7wUdB{b_zj|@3xXd9O z?$8XcRjNxyTd!_K*d23es^-BneQ7AK%$9B$LClhxj9l;+q>7oBdfQ3h(%Rv*5WM`GotnK6LV6a>{X|X?DxSAmIW01Q zOI2z+^YZW#e;TG`*K4bRf)dcg;Jnlzs1o7zoAvs|hoa(`_gM+rz*V;1jQ5h@jrp8pSg~uGr|aYCqvjS}SV%+8>0Mgtg^2&@YMzKz-Z@H}?rF zlW9!`8|5rVz8S@B1~|iouzRdXt$$Bi!LzgVJEfM4m`3{L4I1I{_+~2j7HOEmUBU(v zEv*Ucz(q@Z8B_D>LuDU1XrrC=xcgE9VzOj`G!q;6Zb$K9+oA&`Q@Aut3ePENW4D8c zByT8NFmGU)B21w(ti$?S1{^UznHD=Gr7a0Me=R59s*(D>!(E=nL0F%WoSb3ESvk;Z zgW!vrQ#*SDh#L?5Lni=t=3`bXPFVV_2V`S#)h*?D(tSM;4Ja*>Ag$E~m>TaBE@M2& z%+8L1g(fNx130tcjav#bjP;ujI~Ok1FfMeDy6KlIgtH19fH5=omF9gq_>pxo=NU)- zT2j3ZwT3Js`xGoY&GRE&l1IC{MlAp;$$#!!;pL{Tc1(-WXf!KbCs3x>%J%&x-#j>g zI?H$By*NZUOxc~4+1A+ub;wfg$h=~)Xe-X3=fxQaAtq~+%G4~Wrqqn^H+sWUT`9+X zXsDD|EkhC_(*LSZXP10+Eu9U{>GGWoF_>odAMM6-=aGzj(49xU&BN;)UFFSGS6gH> z@Ot9PC6Fg^+qI`D*{N`?C4mW`&4?W9Ra3R&t}2?gHfw1kEeL)JO!vy{Gj*N_4! z#SfU-P4Q?@TkOPJNeokr_tplU=9}cy)k+&sbO~VDb;NRR@B0yjoj!{$x55J~+RVmf zEM8@+)Y4K;1Jcdu?Sd?ZJNZn!K@b$zf!HR3WW(2BnO~CE>ypN%c)@*_FWAF|{{n zVp=(F@wmO84@O!0M|-d;zWULjP1Q&xgiBM3@1YtQ_QOXAfLfA=ru%%fq%afWF#slcH=C?*Zh-&r;1zlZS;#ei=3H(It8NW3^lN#1MiNhoQ8PHFwdTRuk9>GMZXU$X7s}6@t-GxBI%lkOhxwnv*_-8r zulh&^bA^+AO)0*{b7b?T%~d$T_UkPeU~3nuuB+&D%e0cpv!6$MGGlFH&YgXHBcCa%_;7*SNjv@&~F%IJ0p zsE_6X1dq0%b?;hQBpa!jnolrZ2anf)ps;ZHN03klHW7iBKPUQc_l3b5Zim4`Z(mDc zk}(kn%C&9I%O&nshauF9_W2lc+E^e!6MjYmOTeRE_HL)#xuf~0A0A@Vjyl_Nk_JsH z`V6vXMyUq4v*S50rPKmWH^w1Z3EFNg84@9!?N?>o!}976*3MR;u=4XAdsWDxnSa)PWgvHWIQVr|ZL6712$zF$vR z+DGtGns@n!fAlIoiL4T<7K!J5F2BAuy<9D@Uos%YDTd3YdQTySK4Ddn9 zV-Z3f@FJ2q+?)iN?G8??6^2MN6`@3fVF6L={Q#&c(3Qavis=J@(Q5F^Bsfg7uwcPH zwPnf^<;7s2r+lA=2DG4p<$kHmXM8kpUna`WUhhNofC%ZqBPk9{H$qYtqw25%5Jrb+ z-SE{$KRZs~EnCR9=ZGdvq?IO?^&MtD6s(*OnkAOw#tBLT`JYnBAHV`8m}%-uD0Mh} zmOr%A;B(Eo?cK-cpfhZy@~XfgmdiDDlBM-nF;zox$KalSALnoakU@%deWJ1ItDs}5@NQVC@<(BcVrm&-b zI&n&MI<1$Jm7g-`Eglsv;NiD;1QQg`o5S&}s{#v2Jk~x_XfZ9|$10+K-e-AjX&zc) zf>00+>u?BaSF-1En>@k75>#9!ufK!BsD-MfoHB^QqZPXf>Z!fIj0*e;U2Aw}H32%KV?Cy% znah>bUcW~tTn!9!zzu4ChMP`z)^#d?mVB_-$>K*AL<|+?U7lMZTF1BUp`cfv`vdX0 zZ6hz)pO}-8N!3?7Lura|Ckrk%&e$)7xSh&&l8yah#T()~LZbi!aX zN(+2lC(-nrvhSbCNBf77chfIcmOy=0$k-m3nGaSpQkejvpLrbE8nq=zQ>uI2E#Qv( z^I-AfR{C#tJRKm_Yb3ai$f!mSk-33+X`bHmVH_NLMZW-eJj{)r@6L&m-Co{QTC{A> zEs$-acljE`PY_n4>%kiu_Ha+R(TH=OrZraIuIcM0{ot{a@PY(Q}U+*W8B>L$8QZfE^<{uL-Ki~o1X66-5 zR0Y<***sW3lAxmRTq8gRkUh+O`L&V^22N`S?@b`@BR}j``!Y3#{$1u%gg1cE_#kg z_hlsb#2%Wu^%J-Va|RM9q6NdpM5v;@w9y0PG%dCPUYvOKX|yq>zZF(!iOfyF-t5MB z=;5R}{D2eT`+ym);&0NlkOrEVaUP(e>6K+v0VEc1V?_9V^aY5B%a{n&R2S8lqg)!U zWAZ380g=@D;^1r0QAm)>UQrSuUMbgL7)U`#=pIl$0&TEN`jmj7!oi{GWtCR9l^`^8 zpY!YsrJ}x$MZo$xeBga~w&$5zcC7yj$Y~3Q_KT%Grv*kvW1jTpXn#iC)80&AB_?t^!Pxp+(H<{B`oyQmh8|+DCoJ=|5gEOpNWqK zQ&3`HnwGb!Bnbb}Dhfi@zOV$-5{XyqzOdUG$9*r*j|W$)0XE?Bi@?NqzYiCo?s}pF z;Lfhzp@V8GZ!-|iE8|UeWz(GmZuh*BDB;frhXuR01>}8 z#>{h)lLD*)S`=wnEcl+0mW|Zu{VI!xP5+X}Cz1isQC=2!mm<7?fQZ@l^mdvIz#~nf z{cVfCXc<`hfn;(Gn+Q!Rd8?e;nN8wgKR7Osmgg=SuS?0p<`QtdEzHHwmC+zJ~=-RjROJ9U)b$bo>fy*vPp;-13bE zdnovTzt%{xlK_I&^olA#K9%;mw0F8qTM3Zuame^4ck8|i!O!)$YuC*iB_^tSvDe8% zsF7Ln4Aj@B6lvqLOQk!)CA1YTKzs!RmpteI2qVT34Tbu7J1V6Gf_t0NPtZqn%wIsHITdR11U~u6~T>xXD=x&N)WfYCAM;s zIxkAxjz(4SYbXK;!z=&k;$V_cc4L7=o&duA6bs(6Preg)c>^@yK^6=XG5OK4Wv_i* z$&DRmo_NS8F4_}ugYh_Rff3*;a#LqI+T>N^|3(Sa8!egYO`o`#)OymL5AlAW~_!=;=U{Z3a> zrf)ksOj8G(?yYoe>q{=WN&Rc1I>`tNIjl_;4&!?ofAQnI7R27%-e7QB+~X@S`!q>- z`^r;yW2F2#K3L_HJ4+)c&B8p<-jA@eCH@}x5n^ZyXr3cY;j1D)zNXMK>z zO2jmNkc<7GI(0y9hB0Cn#AQ6O=W~nJ`{qV4>IA%BAF`U2IH~toD2NM3S-R}sg0u3p z3=~cGAEAuFg8(HJwuktLpa|H?zMNiD^y3vGcm7{X%en@OH^6-%qY4?DQAhc68Y+tt zEkkYy|E5PIInziK7t=q*E$1?l1T#oCehxA9KSbdrjEi&@eUy)v(izei`}bqAPW!>N}q+_f{LCFncVJCSnX%i!7& znMJ0B>q@0Ndm)iM?7IupZjXc>+!BEzD`hN%y_W6kpHL{iEm>>#&Yp_jZ~%9je5(Mk?ucoQ_Z?VS)SQcUFQ? z!o*<-IMXTwKr@#Mmw;WKptUufm;eJD8j#0*B?`CX&(lVuA|A*j;5Bb(pkMQ!vfWH3QLqIYPe6h@edsWhZ4~bB zF#hO=Ee&J(jT5cROCS969ANwmxvFr*MPA#y(6H_kWi%c>Q1S1ja&qi_ij!iG;9zg4 z1{(K3J=RG{#pL`PK-2ADl*l7!W2rI;LO&hLLo{!qBGM_(Sg*Z_iD-nNI;8fU#$>fS z;=SGjk^sbumzhX;?G}>pB~V?^3;x~vbj=*nviC`X*gOc7qxh69L7pDSjUu5&gsBzbP0>8(%`jBX6s#*ox9`!3P2Bm#Asb4_GXOd~%?|aYkxTaE4XwmayAwN`q)YV~)g6*?i&-Le3JicGd`Y(ztxefyV zPPNTB8(3TVD<(B;T%p@d&|f6ZUOE)_pvN&~$;bFyiw-S+LbbbNX((H1iU;NpF~Akq zC_mJ(j+b}NUc5VbgPzo|`J3sS!3tGOWYvjs(!Ea)lR_W=X~Ec+p50w-3XhW?1~tNO zbiFe=4{Tad@skq_BNe&bNAspuScqWB~xjN4}D!^?y@scD%<`TvittBQ)V36^LG!6Cuj2^QQX zxVyW%%Mup1;O_43y4XT+cXzkNf-L-4xZKBk&VBpdzM1JWr>Co{t7@eE%@irvF1IC|F|+X_J|{*CS-wXMjzh^o zKN)^?y%%fJx`WlA3*E9dxd)F?K|6_>-T)gjk&^b*HTQ9QKMXrY`}O3pHoPY=ZEFiH zb62ah)es>P3g5~(pGO%pGxjgeBGzhMp>X<=34rX0qm&X!pk|vNGy9nkKRrKH+V>3> zcPtx?w0(9OEoAhk+S{6pp$lyiwp0g6l6tJ4p5o@|=!Vg@C)oM1}au!&l%)Q{ANa^bk82-2(?>_gwW2PiSc{QW~% zxi5LjvVMGgR4c{_qJmG_)FS9mS>`KTKi*V~%Nm zZu~-kSZN*Vk+;j@iLLG{lO*DBjgY7IOO|#+Ek1*ra<8Jb{A*&3-*53?JLI8!V@B`P zH14&Mq*nv9)o5CWX{AB41*hdM+32`!lzpO_yi%J2&9S7VAYt=8{=qbTR;IJ@U4}tr z1AF@!%DpPxB8g|d)|p0&M(~|p5V3T%bc6&qQJOA9Rh=Tco#&N{K%_N~DL0pee59wX zUfEKYE|2In>s9QWFS5$LZ5y|8NNS^gOxZEon>x~K{h>&PvU+x+J9^ayL_)A(Yg|Lx zI+@j_8bH21rl*&?zZUVU(X5BZxyh-%X^b^GT%w*StDaPLP}qT@dxcu&uHi+MOap$W ztNi$BuzRpK6Hwy&*zmj+hq&GxL1y1$xAMAR%0KJ6EEtwi_&T?c=X+`IRR8D9L@X*;yAyQ@_WqseBwEhMe;erHM|i%z`j z^ig`&*e9p*=3D3erd*sDie>v^)Tw#o7zS*k;i>m^_@32zpP;qa+}o9AG&yiAUY^8l zE>n+pr>R#q<32)Rl`3kN$*C_NmSRSw^M2t#Dr;SKgb+I}u{0b%sbFS8+v@Mi0?o9Y zBXV5c;J0smFbEfBw$f@f^5b6E8DgXJ^Sj5Y$sZ2km8iLOXiMf{8z&hKUcKFxe$$(F zut=V3_f&Q@^5zOC099oz^3UP@^`-pN3SdoBBBsGU&2>aLA4e}0Rw7WfeoV_s;-KX3 z5W1kvL)uSJ*VqbhTp>o5qPM;71*BSVJnL?GJRYiv{F-2%NZGa~KMulL)Rmy3)kWw}X`iBtR0 zHq)=u6tGeoj=0Uqh)^{tK6X&DOlJ_dwi3+seIYA`?CyqZU@g)=d-^py^t1z7 zsgtTeCpx`|8!dKghG!FMFh8_mXw}*wOlQczC7<#{83g(&u(?h&BKdk}Ij6quF|Z3+ zX7nGCO5a@as)JLc?>FkW6 z6w7~WCqd?509<7Fhwz$xdUpXGb!hJUuEBhA@$YiBay>$!{%vKHj`oJ-QD;_nxQGrp zqwT8RQ=N2F&qI_ufLYF9(zxD^t)o^Rp!ii(qxqq}&I;{PbcNk&g9Tjm7J8Em-5bCq zv+$%)p*;_-h?R1!KorcMOf^Gh4*nYMr^{+{3e0nKV#1HMjJ$ZDZ5_n?UV)`+#7)L} zXQzbhVErv%%}Osbc_6Mqo($rx^NB zc&^%PL~zEw!fnW!PV4F5P=6cZlMUj@t(a2(8u>{-KZ->wx%O(eC7x4GriplW2Vl6v zMR}8Sx6-)?0oM|2N;|VNdF%pEu;@Muv&j;#gG-&ZvUW0os~y_gth%ivpje38xQw3s zN}N^A)b%OlU%MU5ua8vjyQUJGCNFWdr?x@RvqBupmA*4G%PmR$uAyjbmS&zaDJY|2 zaThAV!gSeo*Q1zfbgR+oJ;}+kJG&86G*zBt@+`B`q6PA5TuVhQ7Z0vv-vTHZfDjwA1!t_nIB@AJV(Sb-c*Ed)#P{k>N^fd=0sU^9(VD%+_B(nyj>k7 zH9Jh34jdZhbN$i}l+mSLOhp1w3PN^|CfN!YYy-bnm&^`_yNAzXAOseHOiwulw#3hE zmQ)tYTInX(HfG*$8U&dHme9q-c)$#cpHN(?o+W-Aa{HW$EfdPN0*P z`j$->%jeA_>?E=l>EcB}e@JB$I4jnKRi#8GKXi8Fg+3lZhEpv->c2Xsv4yrd+z?6S z{Q$DHI40rUQ!)$O>~MPE3Qs|{19ofv4|qt*(%oS==Y8-KXQjHGM6gY?sU;#^?+Wne z@$!OORk#GH{(E~<4O9HLWg5#fW6L#<8!$;;O86f+<)S{{^cx?MG$Gt8gBIKjHze;utbcNM^{QA6!SA)k{)*&)* z1z2pEToVc-b)TmHx#osEF=>$vl9t(7+}YT3A#&IE8>>pvOzy{|lhbi;HPYd%fh8+C zsa>ZlDK#as5aKpe)HIyHb_^rFp|~o{6c7|R(A;E60)X@0wYr7`$n5{v6FePpSt;dGGRVNP zB5B|NO=YQmL^XR1=gXBrY5=*9BJ3kOdkZUh>E)SYr-hy)v}f$QxuZ3=q%7T`%3?Jr z7s>C>u^topoW0=r99aX_wS~P0G?;m&yp6U|rO{}X%PJs6M!lQ1)yexxvAEOE)}Ej- zqldMa;N`BR!>EfQ{h=UL*t{u&Bm%DP0j#Y{Q?_+WkyQ%m#2r{EedK5w+;qFsEcz1p zJV|GiPAgVrcr70UCVr|dZQ&}=`{&dn7e8|J(8?l2ZlE>ldZu!HAdPpBfcTC1feMCl zvqyCJV%`@(6s!AK5*so1u%?S^i|lUujH^htQT?9=V=+;-V}KIKlC6uiw(B{j2a--k zUL|WiL+50hswpfn=*i1<-E_)7;;T8$GdJddTWDaD;`^K#&&9Ir2g3yb8_!|*z09Jn->1dVcy{TBP$pSYbA9A8+|soqW_)N$-6|oY^{38EGs~S-HOmM=kjrM+{(Ee-*X&% zLcOS%V4K2FB1vS1M06;AxRTbhz9e6Xbb&-SCBlPjF^BwOb!$y23UN1|KCZXSOL1|y zKF}y5j+Vxox_kJ*)AA^qlKG13tF#qIEm{UIPY=pZGhwO9L+6-v%!BPvV(<~cmCd$fi#EMmIX%I;*axTQJ`?8-*ITv#! zy62ZgPM8s|KA`Wq4hKprg(#)-BbD3p>`hEUUG?F++70ki=w&{fEW6B_ZRVH%^bQif z)mD`_Me2gs3qYWMlEa;AZbdr``WsjYZ0Rhk7(Mry#a7PyHn^je<8DpY&von^qzzOF zo;mkV(jcrUb>b#!2dtH6jG(cv1>(UTa0wy}(ise}lpmaNh0?|Jq)O+VV!hTl78q%>H&tXW>6Xnpm?Ys904v?04BJ zv{jM?^5UU1?Dvj~@j~gZjAODK(o&qZTg5htbptsx#f{SE_Gp@YfO-G>@>g6{9v!p9 z$jX3pU0=*N?8am8n$kS`4 z5dEi00P{AHbKw&*P{p_t^xq!OuQw^JmbdkO;FCNi`}B(@5*1@AR;{Be0adl(+tW?J zKiz7d`T#$s5kI*0k|8C|{BY6+$6k8(A8%7Ly*o;5?>lb|Zg_UD12-eXUjl^xE&FA> zpF8{irzoa)`Qmp@e)+4&IArFftY2J18TDrqw7IasHeeb+ugGTfS@bT=F<&+-8*c%zlvts(Qp+fV0NqqIR;pkDlOd zvp8Fa@Oc~%XmLo+Sh2>A#yD-uMbue;pR490irY(3V=Uen1}JG*sEcSuUWxT((!0K2 z5|6qP1EaqwrBuH=9@bp@WNnYn11>B-?c4*y6RE{2PUebTAfYvQ_ta)@tu?w%yaWZN z>bV?oOhUi#;6L$WX}!Gel5W7A61*gko)>r%b-BX>uWLB+ASe%uU$H7G*)|r(c{Z zX;}I_`-;k~^yDoiZOVhW@HVG|DggKJiJ}hxpkzc9p1)!~uCn1u=Mn6Ad~UxBr99wBZ|jc& zOwVWwXz7Y1&}uD&u|C{ig)tQj9@8u1T;l|NK4-vss(M-$pV>aJ6?c_5x;VI>f5k~* zVD6<Q;t!1?@WYE^3WxECdI>%dc47@GF*~jYn9Lf&y?RLY87`A|O>-K1#pgu2$s@c3w1Q z3=W<$&2`n&Mbpi3#f>^Wmx1~V#tBE?vD;hoy3}CfsRzV1H#|We;mIHdGQY)ZU^NN5 zpe%-H8<1LVeOGXn*6!R-4}|AScySC(s6=4!MUp zlKCx_cd!UewS_qFlPrY>qpEJ91|h2IZFuI0V_fb5bcGV;{T0i`QE~$Buh&u4-!?vt zNO=}+mI!;E*)-Xro3Sbes|$=KEj01VacR;?;952yeh+R#Ow5b#6-AQXP}3~(SsF5E zRPY3D6k!`;h!W_owrL|-TsGFY%!$ewFoV5p#EuP2eE^2>$GmdT5=6+@T$AJrG&cHa&SZB*71@I7)8P}bbpq(y|F)Rnk|8V!@6jZ+_BWtSVT155uVi5L}(A;H|?Ti&wiJmlYAiE<5`7>*f8K&@st9v79LwC+v@yTFr6)|?Q8*8 zKc8zT=EqoP%VD`v3m)}!vr)Ia(B?9;Q^m<7xRmgQ#O3hULc|Bi(zVU=d$GaEJtz0; z=JUJ@%Oknz(s{t{5N;GK1hT^AztR6Qzp2SewLP`m-)WlXlj%1%aDg#5KyA%~ z&t~av$lu)Bd?4oW8>HVFT{h!PrB5-Ow(8?d7ZR33pd=neg~Kzyl8ue6=gWZexIE7) z7G;zUj9|L2?;%VNB)bx^n{T;niGZHTqIcaG;|js=e2TqVAQOEiv7_j$H|YgH3O_7B zW(6IDiqG4ejyn^=3_F236}6kwmJ65WG)>@1k z>s91rtQra(F9xI>4%`M3Ym7f06nmj#tE;_v$Nr5yh$mw6pt$qo4(#d|>nkXePbd73SaU^)K`B_AgE!LE(l4b# zaV#sah2+=MBRDr~MgEK~=SPyUeiwQaiz3sVD@mu~syHnHvJ0K>4p*lgPLWY`1JFai zqBe;ut^uPya$90e5s8pt;4Dl_6fRYtBob*!UI-yNxTJDp% zt#kC5^BHbqs_r0*fG*T0Me1H^dVT;g5j}#GN(k7VV7eov-FmWpDT;w^IU8gY=U_47 z6N%l#?3G_;9xi}YB)-Lcflcg!zCX`V>IkPA{`v8IF!@@@fWFhz!CXHi3Xs(HTcn(M z|GvpCA2WK`2GQX}t$cp8=xYAL5i7(QdfKWzA!8%B>J&q4=}9N%$y%Gcup$xeuQz6~ zP+a8ba2`pC!e+6aQcxQv($qFa^xuD-@GGN~Y?V;4DXCT!srvAB>MEX?2kwa+pu#PJ zNS3DrPjB%{!16{pt>Z?$rg)QavhdnVk%uzTMOixFX9bc8uxpa(Fo6Y6az=%l7%&Vzv%J8fZSW2kx>UM3FpQ$qmz%XbrU-Yo z3wIJRNXG1#w_q*q(!0BO=#(sar_c~Um$<(T?lsyBbdX)9Lw5@PfE3sAwiwU%V1Dua zG@Eif@6^ITdcp2|oAvFsDaZhLu%Gv6=@*?h6VZutz92VE+HD_-{!nIKjCg%J<04g@ck1+3?7YT@ zY%y&EF#M3ZUf?oYd4hCdJh#D&YUR7x^`@QYGSfG=Eab`!+B%R!6M_A*GroOH#oC!p zYbCrrSA{3v#z~@c+ma0++M8+H^Ca8k^v}2UcmIGYpZ2%acQW~$V_9~el(us8eVE#4 zK&-We-gJo9D(AA=qI z@p8KmI`QCMfcum)X*Q$4L5qQp7om5JoR(ZWQRe#Fh2k?p2nnlWHpG zrc0nc@lL>4$GPZ?sdx)T;%#Hgs`38W8%(swbgO>quLQVyzq4tnY*_cV%?&Dj)x{z@ zuzsv+>~`VVKa;t;MsA)@6X4Xe(34WzweQiiEp6xbM1Abqpp!y$p`aX5Xu7|oo1=uW zSzx#`X9AcoaSUyOiQT}RE(;D0G1}I%=;XUg2=^mXa?kd!j&L&%@5KP-%O50>WETs0 z|KT7rnncSln>Zdw_a~6BL_>Zim!jE#S6urZvST_)*&Uy+&`4{(jjcDy`)kongh!-a zGJB+**8ZWb*e>qLQw&B!H(i#unW`NpJP#a+xiuo&v5|-$`6J2d+RnVuKC!z--c>8D z`CKpC;6gnK2k~B)y3Y}I*gqv+ZevjM>%OMgmsUf8_0siZ=I*eS$kq=u*coI4RS^yN zWdHKqLe{Q=4mvuaSZzT&$fJ8!e6~_$Vp1F^s^x4y;foU`hryO7_n+OHRa1A{f2^c$G!t~f zW|+F+P%1HaQQ}})px=3t_3%Om>yB9Jff+401o9{e2as^ed(U{1(Mr18E(f5}IQ8mK zT9?$)QI^AVphUJFC+Y|ieG+N=xe(p*!Se|uC^Qe#U<$Cvel5JD2s`R^^~@=mEPDNE zfCfrcY0BeMt^Au{?v6+vByqE|T&^4c%7qMJxj;TdCweSlWNuK+q|xIow+8Q-ji{RU zD=7(iIY{7v{VdKrZrM zBB35+ZZgVi6)V!&Ko^~SG?=35JkJhkT;fwa5S8mrbLp23%iOJTPqO|w%sqSC>vdQ-|{CnJk1-Kg*2~`j#oTOxR3{jS>-?5E&htbl1OpH1Bww@++?2{**HNJ=WuFZH0!L-GB9a z9PdnzRc1PcYu7Jw^2}P)zVe9!Ueg{V^8%xK$!g}$FadllxzkzbfD;TkhR41TaS)lw zyLk8GoG198r&>aa!ApMeFpxy6g0;vIbm>r#3tTR<*U)fTSE!!mfU2rJntUj4T=vL; zW^q<+z+KDh#piIVXLF8M8{tfd;EXcimkfcwaFKbY9haQ|){Ah+&jPNDlY2eWGiFQ5 z_?>+~_JJHe4N)K!Z<1dX@?ZdfZ-`xPX{80(wrd+%Kx0oudDfKZb z_`mQr?VKEjG6O(WWHEgRz7iwtH@1!f8>>3mFNJ*7nP`VjY1LpI1&r04t-8#Tf8A5$ zL7nL||G4O>nmGh9xav#FChl1R#D<4k5%25>306sCKb@)#TQRISgs zIrxCBWRiRNEv7K$vk2VM?`M}QpS zhaqd9h+}mZ#F(L(_w-lzT&f$X zOCmhZ+iKmCoCwy~-IfN$^^Z=uo1npi-9YmeY`+Ou?jDcC9p6{20|mxnFNu%j7>QdH zs|G50{-R*a79IDS2OE&v=I*_t1+-ZHYq%+TSrR&4NFYsmvxkgX_^EwG zk29)9Jtd8Y{4p>IQG68BlV{z63%l>$w)T(1K1Pc`-7T~CW4{Zu4$~aSm1#%BXf}f0 z?6kcb^@1F2QNUD-Gi8q2zgzN2d1W2TgzndW$hk1TeN|NtmMtLjwI|i0gX6sdo@K^y zw^?RJRBoQn^0)}BX)jI}R>slxm6AC&p<%enYAZvSfQ|6nx11u|GGIJ}>;Ug6A=BzJ z+6w8MrFo2B=gDeq)1B+-(?n}Ge3SCd+xLnkMx1q|LHu!z%aNrb9wP&dJE3z)*G!2$x`}J#2WuVy_B?<$kG^B z?aXlALtb;v>X+3+mN>;V*wmQt;HDpuClH4Acy6wx~YyelGCa{9SpE=k}}q+FW!ku)TV!yp%;VcJWaC zuEFek!l@CbxUOS)Pb6CNWNBC2RPs4dj?1gzBQP7Jv9$X$Kqz)es|)B}_vau`k__dP zqqAofF|*^yMmvG)Vt8a*8H{K2Jn3-;%SUzY7Xe)8z(k*cfXuSI*6z^&?Gc6MU}>Ug zqfdc!HuW#h5k^rFfY}NTnJB@Oh~Q0-zu1hHy0)K5Wh}NWg8^=8->N%ows1cz!IYv%;$kEzM@Vui zf51Jy)}#6!zpLH~=@!KE>jZ*zEU*h;VK?kZNC1(JPt35PZO6$Spg3S!P`v}|gIz!C zf7OPp$qI3yoCMR%PJy6#Rp_h!g7?V?v4_EU`0j70a#WqnpS9!B!5^c1m%+tk&wtLg zsp{18#nu}YL^cZ;AgC+j%~G-8QmECJLGU>Vnq3r%U=rnJ=rf8k%|qwTV`sj_2P&fZtU0lKTBFPTiNz$DMny zM)#>T1Hczz(PNaRSoaUm#1Tkaoe|MA?y(JEBaF*OZU`07LU9=)ZgEa}(8#xO_!-i$3Mr z!Yvm9a+CnOOAu7uA8h1jT>N(A)``JDImg)c5SE*;X?feC@Xtf2{N-O!C|@#r=MpzV zavk=BR_`Ur`0o!Uqj52?$e0L{IZjLJ>1o*pr3kM_8g=uBtZ2PR*xe`pja-yHTOp)V z>%_xew7tKkNqhUpR5Tcc+~faQG+!s=nx>AA1r|o`9_8L<`sI$f^@!=e8-D6i-A%`= zJN6N~Pda}?yi}w(SY3teLG#M#jldX>a6o{YW5OkqCFMppD&~9;R@&4@_8qniEI@a9 zgx^^dO#kOC6xpk)fj~fq3x7+-$5hxTZ6JmLA5Jshp(K~H+E7cZZLkl^ddXYY5K8*^ zi~ZVPM9K*6d)t&|O{_!45BQR!XfQV;{8X&YM%$YEur{6le(N>! zXtMA|G3@6)7fDqiPaXbZLWAu`D8f=qrWiSq>N=~-(_6$Yy1m}4JWkxBaBnaE z(a&C+04$<-846r6Rs;EV({^uJt4jQ&f{i(4 zi>2x-pPWwIRk!j=+|^dw5P^`rz5ictfPpPZHaA!p7&|x^7}EdG8$i;++R|9u)5HCL zjR8DWHk3j{G5xN!C*^S*ahp_hYzciRf>rZT!}?4Dxi)I0dbh*&O9{P2 z4Lc}VyJy=jW~%cinD^!XNS_G4*noJyC){a$F9ujSYTrh?fPd3kz?GUNcPo z+ugt?;7iNaj*!Sz-g1}nOu*(PXlY|)XiL1c^Zmb;x8mSknqRWUudfR;w-eECZSQvO zkKMJHq7GmBzDAeF6EW^NDg zgkB*x6Aw%AOID9lFa36pM^5kmy;`@f`vv&=zn-)a`Ly#E?fEZJ*|0Z4SIb1?BM3wvwbS<_IpO;VPkBi>*ek0<#6KQ!;;Jd;0=Dcxp!f% z{kKo|0RqJyW+6(y?pbr@Ol=+gr!?|5`!!haZ1DxavK8 zC;R7ngHvfDS%ssKy9<%JO?&|&0?I` zI>#qPC<<-L81rb{&FNbecv!~0mw9c>{C6=`Y06)1?DCIDNy^dD7Yl)Q z5Afwy>qpY+FHDc8yq*#D=n&dPSDNDxe|8cery?>~dZbbu{@i40$*%(K<+ixeFU`jz zho4C$96x&lW3x`-W^Pe0s>{P3dS4cQ#29JpIH{o~tj)p;cSFvjWUQNj=XOFDM(IuT#?pnEmv z3PErQv*Bz_k13;#BvZU>-YhO&?Bi=E?0Sn01|2L0A!>6kD3U(;8~NYkaeR*X;xm!4 z^=pyVJ%^w7T)=5PbYx*!xlBA>u>W9jtnik;odjiTq%v9jNYzCEw=-UyE_}Rr7r^8} zR;~n_xJXF~?0Uw)QdNO7w|8 z9=J~LlpbW2=reRP#p_tbCU3l+ZcnSLfI)g45haqu8D6PYDk;l3=`dc<&A>I8S6TuB*y^0Qduzp#eM0xXc#}>8$nNU(qLKKne7hec=oeN4t z(ofDU;@w;Eerkg)`>fIYsU>$xG+OjayyS*g(3}kG3hK)B#>Cn_Fp}Cp9HU10L?kcY zOL=GGxKW^1AXol!2@m?LGC)=&AwQz=?>q>EEDtBQC?{~pwr-H$>y&-BV*ZtL=Q2#C zM6L}({kKNz;zRH8YaP;OlMk|s|>66mrHg;BvM^Mq{6xAyp`lA ztTI?Q7sBe5gXkn@|0*aRvdLYBXqx3vXhK{Dj+VUP8RhE&iLwipNL@_!)>gx`GvqW3 zJx%s>$M$|k>e*@w+!^%doh;|@uO#-w<5WLb@b$%^Quwbj{i@M*aY%!u9|)gH3S-Ce zj#Y?sZ=;yq=fZ|L5~?eo3N2A)gbYydvA{_Uo)mq}Gs2DjU4#QWa%&~zoIN4R)pcIQ z_KkXzFem8`i5PdqXjy82vd&(N{7D@KOeVINHllF z5(h$OxevXU)>1vPU;91Drt4Z-BlpTh5YNjp3#d6U)xEXE$^}P%zbk_3wr=lRMeP_& z12eI3L-NZcb7#4WgNsWk(UlaV8TmpCg0Hgw-0Z0wJ|#e)5MNm(o{8)sA~$|}+y=w$ zK7Z)b@zq2+pgG|6)w@gN63+|3)uq!DXSo=9WI1c}Nt3-I@#kyOB29Pp-O$DZ_c8M? z)ZHweb8n8JY=Z4YMg{Y2GRkdY+Q4G(yF4E4?vA~wbpyz|)0^p5-AvuGHJeXL!EY<$ z#|sJ}Fl-a~*=q4LQ#mMmO)`3J1F!_7`AHG*h+ryr8yt!~SW*y%BavIcSpR*Ra*_zy zqgscw($vUEo7@ZT=?railUs`XPX0J4gEkWv-t#A_hM671@%qQ97;?3Cuk99e3V+T~ zq8teeOw|O?HENNn62^Ou<9@1@ll;R&r=~NaG=>xx@U?#u`iC{^QYbXRj?H^@!zf(2*p4}4* zQDM?7gxBI88ZMJbg{p?bz*Rgn5GE$wF-VYiwrQhUMTga_&D3+NfWD~sCB#Sh7v5t_ z)j!{-8l3UO8r||J&LWT2{I@R_IhaEFwGs=KKJ!+YS>s*|&wloOt*_OU_eYVVsGWyO z)9=p}G~&(w$(a=&sWF3)`B9#FzFCP9V@GqUkTc^FG^!~6w_l4pIT>0?2fPedGf%1J zv{Y&NgmLMGNiaK zK3%uWke3O8m)?-#OEB~JPbs9xH{8kv-%$+q#Wi@5CHv;vWm}p;=u$Oq;!o78YLbd< znNZ@CirL^rsr^*C8#(!saGI(%?7mm>Jn~q&7D?OYY|KRXBu+(%FN%N8d^YLHwHGhnPzqu(#I5;Pb(sZ^*2NJ9 zKH9hssQU*)5?y^pq$$%8*Mt!%EVsK2n=rlPiBDdNnSZ1#-I0N85VxU?>%(Vzj*Ws0 zPd4dcjiw$AVbPLpmX?JDqIhGr(vg~^wKfG@pWlPcGIb_8;9jR4Cf2M7zYfAagQgw) zhgA+qmi>C;iIg)zqbWC%FirmgFL{e5_%We$c#rYN1gB_hWvNEeL4KTBqLf5fy_~I^ zBeVVtuSP2x$Zkvtk~L|oF*6UnX(7b1=#IAvSFes2b2=m#HWURuBc8~lh1`5llzJ0Q zg1w!-!3`dZk!QD=-7urL75<}ImQ;BEXH$p$ht1}yH0mpXNEnP88T(cQ=4v#G0tY*av>K`VuI-LV+FqhSCcrvF z^vbQr^dh1{DEeFc{^)8kZ_(ED7gF9r>M(C}l_ITbD^Pa8C3>U@m--(8`L`K?!BYI$ z(Fs((%IzuV<;%%E!$+@Nq#&k{Pb+MAddwDLJa=*yWYHdaL&K*7RmUrUH2G{zMir3R zaKpYPhog1J*ENC2fqyr;iK#V_Cp>P!p8Hnq(+k#GayIJGF_mHXg_0}uS1bHp#ioOt z$K%?^e?MbilHKJ5d`(e$Gv9tfvO7V1p9Q%NMo8v9{$mq4B!l8>fdeKno{)&lOSeT1 z5jg(+9C;owco`8qAq!K9Ny9sXl622uRZ>v0ob%iUoLJ*2cKH{}u+=bEYD;rA?MMB# zKh@MFIjP&zE{3%WSS=@&;d0X#>bo)u7d6WxZxx; z!)e!j0g~lnD&a`+Y6RRJ7Dul$MPzT2CdJPrX+x3fa~&AY>w=+ z{X`3u4hw}J=}+X$76cTUl9i|Gkok4A(AJ|rezG}^3GI5$r#;lu+%kge_dOPBTk+>h zKxs}Rv}=&XTTnq{Htyq*QSFGp=@M7waZTaN5- zP1How&k2{jJH@n3C*6LHtQu*X?gl%L?QTCLfOqA^cg1vL7~s=|xn*E}>=-t;6C{wcrZjMiX$o5a|?7dW68mAy%C$C#*WPr;B z3Zm5WGlYG(_}Z&a?hZW7zV!>yB}VG(dx`53o|FX_5+k&tiPH1TC-CEH!&p1pBNIeq z{6x>}SbL!OU<;ag0;un3CDVxyP1d>&CXxhtelw+KVJFeZ3zqcOvU#kn8m=}NX%`<_ z!pExuJ@!?t08VxbQQkYfMnb}^J?h=rGaf!`4|^T&5L5BO85k()tuwC0SuEjpD|jgT zN)Py{^WudXa~b(B0e_A!&s{(Ml0{x>pa3%TPX)?%T{hF0&dYDA;{?@?R%VQtyULYb za(De`aD!xpv(qpSr$@7Eb+W@l!6&HiWIt zisMo~>rAsX%{Lgw?^}di$k@giqoPUX_YHl^yw#uBjG>In0(<(|0AKazE^OHz zBi3Xm9ZFeH0f7ku?J>U#$pWS3lsL~#e<*Ky>wcC=A^f@3h2$%?R?F|YWSAG|?1Ze89$y(NaUZ_Y0p!pgsG+V_GQOKD6u z*Nwv>Ol5IR6hya=dW+sIw1Zb!iWlLL^Ol41MLom494qoZfFoaD~hepxc?eqZ`N_J zJWMxQgZHM_C316rC#m_xeNDhua)SBYu=dS)lWL4q{14tw_Jb^$sKM|t5(~hygh_eV(E6nl|>&i)YCI4&2* zFQjbH2JWIBKrPjTOGjCXpY27&22y8Y3g{c-ZQXi9!=te3tkuOi6x~}y1hY3SVJ=ON zr8^<6kpYd1N9ws!QK!z!xMw8J;DkQN$VqsKqydNvheX zbeYopeee%cOy5vn>==}+Fu&r0WfW;1^<<(_K4GY`^I7&Z0}NP}@9oGsZ7kJ{W95;VxzJi}%hw$Gx=M1>@zy5FSN zl;v8R!FEmmP=_M)PKlDIFL9prBR|asVig#q!GRY5V00&ifuN_iFZ!6a3o<;`TyO8= zd1WKP|HIZ>hQ$$d>!O2OaCdhJuE8CGySuvwcXxt>!QI`0L(l+&y9al70-VXW_kHe> z{inL8x_U{il6Q60tXgaR*!^BU6IX0!x}};Ql?=(ZuY5Nz9tG?gFp_~i#rWK->6Hg26Q!R){85bU8UWmsOo_ z0i&8o87}@zXsq*0!BV^$d?8`>+oSMhm((qnvB@~>UFj6De+R! zVToHVC_QnKa|cF4Mc??!++@!KU>z{83+*NZhE3pioFA^IzhIcNSedW9jTgjK(1)tL z-l#s-4BZGW!n)yonU7V0wTBhLtq2dN&YgIE|#>7E9V+7~>NIv)$@agSG3YJ}jiK;VGBUV4CJR4Y2&QX?+yA<%a_@+w)|jn8 zJMQ4XFKiomhxF$`kL#6rI^ps`(VWt*QiU!w)NIN`v~s$^_O+#0&Xm8*+3G^^>vBon z;+a__tv|5ql+Gs!*}bqZb3cxK2u(U0W#L*|97{2Y(hz)b=i~1qSLNW5+UNu)>DX{} z6@w^#jlcBeE+KfKkpzeX9N(&Ev2W0+Jw$E2vr&xH0y%OITa!5A+nl*gi+Y3fgI4_@ zij*iFO>G67H}dk5_IE##5$_<}>~8XfWKbOx?LElmdo1wo(9qzu+b?ER#XQEqth_C; ze?{Z!f;Q6rIBzkcnzU&)8lQD<=I7@PXo?-M#C>=*W$LZoF@@C8L_&QH$+u z=mt(aX_{2lHQ_1XH?fwi28>L+NnHgaJ@llCd}C=YBOOrq;SeCk*$lnfnL7s&V9$If z%gqoUGy+~LKO6h?KG?+V=7;_a|K(MfY`4-8n!@Z}5%UXIP~7i2HVMy&mCwOQe@v-g zLb0G#$n-XW3Kvs_{G)jOYkhueH!{(D8gGLU-(RB^7vOS|d;{H^-=lgE^;RSBJ*G~h zXPHF_dJ%}MWJ**)LK-)SPS)klJY|@kbn@PPvRfT%*+QsNENL8Xr7B3j=p}crtR=Tj zqh?qzE6lu(d{WoEH_DioL~N3H@u%I7^7G_YJJA+7CTZ_ST`G;G!10c9ue5ZEP|F5SPdyyt*O>ebr`kPK(9*nckq`Jpak~9f=nQq~zS-%I zrQsv8=8ETUO@dvOzn|c}S;ysL zi*o^*^g;_Jh)i9KuzcLva{ZMHDD9eC)0xa923H9vclHykE)PF>^p?QLYOkSokyapc z=~a07N-O=X3_tp;SnS4?MbfxXvvR^8u2kaT35i#*{Z4Cht(rM#P*=jWhTyoMfVEx~ zS`w2!R!g2tNI-NQ)X3d<(k5qo{5SWoXAvS28Kg*qIX+2bDBUsvTf$@&RB$VSr|Q)G z=Y{v7)yB%U;_vzaKd#QU;G$5+sllxXQ?XC(RvZ-s6sc0TUZ1PP3n;0JfLSjLf#xwSx`|^18 z;5ni!6k92IKU2c)X6||GBr#h#h+-`5RpX=a(xcO3tlJshyT#O{YD*yW3d52;-8hn( zJvM%Gc9CS0?Mis`>%q#qZpiImNmXb<&{b%FTgn04n+ybXvcU_G1CR|BAP_XC496aX zFsu_-o~z!HR1q%*-7n*p&xTj?V=cEw)||nGI(2{M6XGa-wl!xe`+_a~3pj*6IM_wK zW5^KwL9oH#ar6sGWxG&lNzEz@GH1_taA69Vf1=P(KHp2KK-DcLxkYEQKAiTG2y!al;iu1d zc6^0oz-zk0ox~Y1*Kjp*YAOne*h+E;1y<0Ri#5C9>AnES{show>0W z9&7h#n)??z=M%W^5ZU4=YD})A$&#Y*HZrY+qK*FG3_~`Zbr$}_C|X16+=LrWVYpc~ z_4dPbDt0(ps_Az55mEKC``r)W`U6)1-2-4n%7T2^_!;@Q`e$W|xuf{f`lok;`OD5tdf@r3 zSRg4<8G(XGOyNs`r}cx0ddRJ`U4TQ2l}F9-zLr0f-g;V`{HrAMr)-RAcH&5>LpJy8Fmvqv) zI41#x!*mN`anGNYn|0sfl9i=qy-vkA#pRj~rF;vM?TL6KT`&_g=fG2t3M0fb!kZ3T z$Kes=qsOr5v2OvU9*mmBgZZ`niNdtt%QtFApMmP~a4V}n&!K45_OHz-&AZQ|cRimq z-uF6|v;s*#Lqn^Mwqtu=b+32387e#8mym}!(mVuzp#E8>Pq6pr@+_gw zr5(pWrSBV$Fy`dfA&r_G-iQ@Z$CcHC@9#|SoE@XjMhoHXw-sj~{tPvwG+L1noTOJB zwH_f}Tzv|JPJ2^`Fy3qLXPIyJ=((&%%A`ini4#6m@|q?!PHo3Buub8q!(bzimxuNsbtJdf|S{h=Eag0zQmQq?sm3^AC`$9 zX-t*m)I(s+a}=~G$tf1~w;u3t%TiggKxmo18E9-!ZTg#33(~Q=ydw}$6)T%5ZsQ_k zT-JC+t=^=mj8mR+ZL<8-rx6f-jARWXj*mhdK^pV>t;3ShkbDeSb2z!v^-l0`1A<^G zgQYA-@@1;Z`hwQPfVWnglfd5!4hdzHeLpH%(6A+?EQhA`QSb}WTHv^&^e56EsA)Xt zqg%JuvP2f81dm6V7}~klOoMdBXqpi|OEK*3g3}iSJt~aRh)Vp>q-49L#Vhovjas;9 zi5rzignGl*Drvl2(edY4Hm(Q)#K!POw=+hu_7IY7*2%q!gj~d-aAlzqA{l9K$~eeb zo888OTivqtSXJgBWgf`0+`@u0qL*Y%&eW{kB;V#gfV)ZbEpoLg${$^p;`o#8KsS&C z#^^>18u0F`v_QaDSB<(2++hSt?jOpIFNHAS1)_niXL_^w*Q;K5oZd@qxDb7&XzkyS zc9HZ+KhdUqRk^8^ArO zT~SVAi_$_+|2*wX^3{ryO;0#KVkEIBqf!DTu#+9U zVR-3m0FsP&eDv_J3EDI`?l+MAcU2Ou5-w+)w3aCqlqA588(E4K%ao|HbFu|JsNkeq z^1EJT`tBEBJCaZUT_)S=%hWmPv4S{P@=~NzvlMj)l?d$tbofDX;sGE@L9voY_*pu= z(p}I}u&lJe5JgI?nUuPdBv-$a#BvE{k6(wF-15+EhNejoap%We#gUrjluju3yPpV= zWv%E4(Jggo>!j!7Ze0$8zWceEVeJ4VO6qF`3y6~3V7OQek;&myuQUPJ*V6G>c|2l}1;L(ejtIOw*Bx`15HKqGceHzJb-_(MVsI zY8mgR@=U4Zi`5?Vdr;5yampt;acX!Nz#uOpd(4Az=qA=7(J>$iq6fJ9%8jc%X)3Q} zC4>}&0#c@4awPS#(B#BBfsS!v+{J}@`n9n)@KQ^}3rCt{dx?4lJ`_13|2Da9F+<3Z z)U2KDXn8m%9p1PXmOqr80=MyZjytkOzzvWsYW3nZdEUOD=MN>Ctnr!w-1l7?6gBnH zHtt{}tcaDo8RaMl!S%Qq<*lvRp8*XeqI!OLMXRnIinDL47R$8z*>Hz1Cf}L0SQpO) zs)$TT>G9%>>13>g4Jp<>Q)#~xqBUT!+PrDq`mF3uKhlx)sd&DObTMiX_JE8c6?J@Q zPgHjQ+5+FQEYO?q-r!4>c5+3H2ruYw@XsPb;FKJ>UKEvZi4QOrUMeh1SPKgbh71>t0uFiD?%WKRb%K(a`EuHypZwc`4E5@4i9s5ez07 zVrB zXn=M$b!GY}6LqWE%r;lMk{FKRtF6bwMb|>n?@rnA4D|lC3R&*QZrKI4!`nQk=;f&9NE#g2$WH1%Hwg1yC!jPuS3t3Ct^hOt`Nb*tP(Y$$ zX)y+8cLiaWrcxQHn+uwPV+8>wZ6KROFWl|>(qj_`-l^N;v6Zw(33hfpXsf0a#N4Opc)|g|A@qCxH}#i$ncifLQP8_ zpYHX-b%F}QO0`@#W;A7bZNH%6YOJUZM0|X_V zFbw<1C${j0@vge7WXmvTXBFOuFBBfPvF&4JozN7L9Jdu!RdqnkQ0(doy`t$AQ~XJw z%Ft4x060%kICO5UTP`)xH@i(MYh;C9(`SrqRRD}xmxDxxjX|ww<{@<}IIaRe9x9q7 z6|fKDCxTlr74`?E8O%N8_3D(Bx=W9m+Up-Xm^_}SWhkJ&(GF>d^`-tic;74C`DCT? zx$f7VrgL<;=Db}ne8?7E>9z{$gczc8ZsshG$n?#`JHz**N)&pS1nwr-b1K6u%gkR1 zCzhEiluwlqN=y4AMJU&rlai<2oZ2Ax2z3^^hI~{(yE&nW_x(1bse%X6K*_QgrGgBG zb87N~B2v)_Hp$09Nes`~sl2Vg5B%|J=Q+Z)os+`IQZI)aBrkWO$zh{D&WV<+*W<+R`!=ZZK}B66B|lfI+tr#26l(e7AOAxUSzT4 zlk`2Ycr}I;3p$f#@W^yQ?wrDjz0zr?2`e1hcn_5K6m^UiP@i+c+y&W<8$J7}vhN{; zlqRe>Wyn7(N(5((M9~zI)h{`@u8mvQMTf{oc|*YO2hZl!xis%E&q@3LIO*c%XCsJ< z=-2E|SRKJI^PjV=B=Hx+jK|HojAbq|<*seO6zY}e}1pM%WX?g<39GlfHW#AJZn{E@I`TMh9-oZgp zNr!he^Y9zb5LQi`l)x=KqL46!-2@DA*2@|5t_O)J2XslRP?+6_f7tEW-(kuYk!<%u zfu;!-BqsP#R}PPcbK`*6fuifpkExH>rH{WK!tZxeAMaaAdpm7B)_=QxFu~2CW+`dq zf7cg-mn)~@U1Cuee1S7132@t^u|MSLj1rs;Be_P9QbmZOEcrkho zwXX8jLEq?cbD>!?nDv?kbFZtYXk8RpRth;*TS~B)mAGF|aj78cAt2f9IMN78h3}x^ zFQjMH{F@Q4e=1Fo(Iq`SXqYMsxz zwpY1^$gmAr%gr;V_mV#oelC^y8F4w~kPyz@3_W;jEPNhc3OsCEyEGmGJ$UQXc?sWEon&neZE1w&u&^XtXkVvczZh9X zSy*YjDKD%XkF%IXO6D4<%h%lNJ#1BOTCQc>J8IS3oE`n)@?EuM?mWwA1Nmfhcm4I5 zzG-8r)La>us=haS7zdp_o$Sdk^4%=im;9-IG_dsdy85%bf4^^GHb11Wq8loZEX_lE zyQXye{cOk2#ZG3c%I8s2Yi0bVVYA0_>U1dw$Jw24tH(jp?ffAWmCo+HciqpowvqI7 z!$@btc(r-Np=RoDiw;}A&iKq({UV|NX*pHawEeF}gee+HZuAuiOU$&5eWRvJ-L(gL zGv%=v+cak16vNxUw`-o?{p*%iO;+btZn%7x-=#kc-o8Bbxn?){iQOQ8XkS7Pzf56G2 zGR{MME;0DiGMo!%>!kO{5X*8`3}&e2Cu+7@G;@I$MD<<3DH=h?%7tV~We7 zbWney{`s3q^c3aH1|7vT3`VkWy9f(pd3nY{MjFQG#Q^j7-M`sJA;)z}!7Xg393WU~6-Nn4MpeJ*C$7*2(EWihYwo z^_m!aG(g496u3t>NB*0k&^oY$F&ktvJ3nJeRW&M){|m|u1xaXKN(RWU8)uF^q-tr8 zPMBt@iLL-0%H<*wlAJ<=Y|CR2ZOc)ro4_ETiJq9N;>3ViQ1MSi$T&@vYW6s}=Z5_O zh8T?q6?)-TKW)i|F;<5Ck#y8587>DE+}nsjQ@*nj+P1@V8on`i8P}LDA}L4zkNsH= zg%EGzlxzyu8Yjy6_jbxiy#5WOxTE!Gw~g!H2#%TBQxed|9j7e$;9&9?^eOQ26tYOxvydsxK~&6SvPghm z>TfAbTPc3<$Xiz2>TG@n&lk zH+BNaUu(HLY-GnQBptDMb)Po&$u;xqArBp5Hm7jg41lWShy&KU<1kUiY=beWntKyb z+4#}f#^Z;CvYooTBGnQW)VaACIZR>>+W3LpyQPJUf(8JI^+6RPHb{h%M^0gZ3;XSE zyL%T^CEY|cicOxxhyxf=)QMOa!T#WJ;ilb z3}NPk%W-+P)L-ZE9NSE!12R< zTF_@L!rX4mLFp&+lGVpRrC_^=AP~SnKm5W145GG?etNI(E0 zM4u8r;K>FN@MD?UW}I+8M{ z00=3AMMr;8EA4fsihlXY=2N|9XsI>#>4k&AiaqI&>^9`mci$*%sYnMh4vx0lHk;&^ zmsLup9gW3U`!1iY%yL4~QzXrAo%@SosP(hFqd~i;b{w|O_LQnxcaT!-BF!$!=w+Nk zbCe`XOi02;M(Y_`!-za7CRm?*P*gCQg{aS^_{50ww!S<>sbbwkC!sb zrKT2@`pL_J|2N%ilngn0f;MBC94mV&My8bN?AfIHY(S<&Ofh>;pcTUBGNn@U;#0x~ zch;XM@>1g3rqh`2>!0KsBME;c`6`*XwagCHdJi4HipMHb!P@-NCS8bKyIsknsWl+2 zOvr0rB0`3GNKX%Xm8>qOVmt4u5OO7^GZZG0Gvn72PL6VR(y#CZ0D= zYv2IM)j_r>>AnIp+P@pZ{X`BE-2eJTMEG3krM333`Y5@!H~vdloyAO~k$S*H9;fRu zqyz0OS^TM8A|!<#M08T^CJP&^ZNSP#{$ehgdzTc6XuN0ngj^K{_e(T6wX}f)wjd>xaNitTRi4LR5A z+4S2=1=N=TX5uQ%-#w$7%ijO5KSh?ab6B>(0|5TC007bdj9ryY+}thx175ZD)YfEh z0;cMY;MBMVR1$``8DDECdj~sKCa?we=O6bF7@zZKcm|@H4kyEkwwXPnHQi z>YZA9xVUDXH=6n{A9Py0yFN9rG#*WzyLU$)OeuAqNlRQI2%(Qi=Ox^Y&rwtv=G36- zNU)``^|L8xQ9Z|fpAs9^_8(sE`ttcE&}u5ON}+knVe2t*>iI%>udYr9ot}mxlYxkl z#?X`{Gj0wyb0~(9!Dz4P9bF~)?M-RGwmo3H)Z5U$Re;%>bOU?s^5uG=4|i?pY{%?T zzY+(uRDvfXc6^}{2YuVW&ntXc%u32soy zJgl~<1?P$Qjfc@SwbubP(jK#5u1wJ9cWm1|#M?u|8p-t9+U3Z?^O(R2tl*nO8q$o@ z?eWU_GmrY~l~?l&tL=J3^;&{3@y7bbda9hklvNscv86Y^uu*jn)8x$kf~$qhrH;!J z9s6Bt0LzV_&&CBRu>TlD@v-cHv${Ky$I1{`=e1?TacAcHgoI69s^L3{M10}@JRFvP zB4J}vfc#cofu(>4bmm02rkIf^kPV@s??@z>?o3bbB|~Y?cI39+NV*fK6Yf0}xHGih zVo)l&ClTELnEBulP87b5lK29gw*FNZ9e_3?A%%&pkYb%ez~Aa;bdv}v=oD+^5WcI$ zM@sxY*1?Sq@)LV!Bj=(_R35v5FVRj^w%wLxX+|noFFU)U9QQO?!Fv4_@3AZ$G{g-3 ztswkcF5ig)MCv)W1;K3(|b0f{YFGg zn^;cZsvNA&Z>Ghsjv>aFNDWXeQ{h;ja~N(OR&f|Xr0B=vs&rk@Tu|O2$KbVw3FjXu zPa$0ss?Jxo!qd1hTZ_cTI{8#27hwNdAL7F=eoJMa^dg&p;U%k>w1i*p+w1MxvaA#$ zxlY3;T3Kd15?9AoG>sq^Vai!62Y0%LAP41vRUP@!)LKoJFo5YfZz@oEQB8JJRZXZO z9O_{OGvlmA+_IcN(DLwZ>eO=B#^Khq(1zphtFw{wwP?R>Bx~+?C*h>+5@9zj<%yi8 z7zHNR#J{a`DV{TqsAi0@xhDq@Q8l!%zk7DlctCG$;Dp*x>>-Mm4!M-A8`Kk|Zk;n{ z&@41wt|D!^f1DYEX1s8=%)IKUW@fnLh}!U}-QwrBE@1)TKz$~yV#|tDPB{EwWl0)r zRPywadZx07{ds4s)MdAxlPI-AmkC8aaLQND25{%NV5}UGs zVy zXruyYJ67yJ>|a~jdY7~kQ9Xhj0Ling`7#8s7%T%KmD*^^gX3@jW#L-nK4?^^FXSd7 zJ5-u-2_Vc2*rvq*{GEpi z%Bu!k&2>WP!ax9e!vNd3#DKr-FaV}Ad}@s($(m$MOdugZZ!d*kzFuFl^5^5WCXN+Cu{ran=(7rHW65{8o` zP6(X4+J*I>o7Z*@Z=WL3?S3-O2#>`tob@8}^w$Gc*_s~OlJUQLyq*e{zo0KfQkfL1 zb^t#F;rK4hRub=An$kTcy{|*oIO45 z9A)M~d^z>&Ynl*+mn!Fep*+QwR3f;lPB{Shk}gm@{W6`xjp=B08CI8`cAx4)+Dhp` zL<-hKCle>&a??b6hoi}n(sAj!PRsG?n}{)qpMen5Io9q0Mq2Tp*@4(Lguj=1C+~a_ zgS#}0%yz=6jwJZVApw}PB($q6TPs|f`^g9P9S<4!Ck2mfq>yJi(JYdcmk>bm1#Z~n za=jiN9*XlyNKjj@M`=WFcuQnNo4shC-c)spjh$}R5o>4G5mGuXadKGDCW6E&X8FAd zT&ls<0LtU{tX6`rrVqwtIpaR?(57Ab1_~d|$iuF44(qW_P^_ECpRGS@3}@GBf|iie zSAoozto3kW64b=heC~h#uKn_-WN*{#{=K8QRY-0=EZh0T|L6O5k^L0;udd@K8d0h% zP@}y`^_zlpYtOMW2>`N|$?MDE5Dg^4y$~y8{+hdEed~GP|M{tIxT1S%o)`c?X$Jtv z|7Wu1^h zBg64^pz)2o^i}?Spt0E~;Ng8EaO>^r&voKsfdA_OX>ZTVpN%!t%dNM+w;Qj%-U?n7 zd;0-~yGoDZx^r(gY8{<<;t$7Vcj9kGU61bAMKB48+A@XUC&D! zlRZAyd$GL{cWp^0fr7ffKt-L8TU*_|&nFqEJb!N8FAsiioa*jwIlUiVyme-I^>#g9 z{ka(NtN7%;sJ!OgE=C+8pMJd~9Lu7w9p4)9@?nz3ZJw{In$U(Xq*i9U5q8G_+CYW-5NUEAnp1M4-G|hfi!7hf)x)eG zJ2I$r*)-=BM}GlKWXJA`9VUcZD7_?sD^e4E8oOZ9A3;x1L`#35?~ENyJ6s12pmw-G_Le*fx;p_hxbXf_o%~h!J+OOuFaH0s5hHt zK)Y+FO2gv-%a&I+rdwt>>k7?EYkP?SxUIbqg%l|$GM{j^(Ku}f=nP%ZRo2d(w!*|! zVLh5`v(~a0*U0I3dx3@)sL${Y$0{Kvp2+g)e`(_Oalk0|Q1mfObjgcog@MXK+yo#D z{@{2~AzQwIOPmN>P}*TZDEv9WXixG>3M$oBH6;Gchj4^w)J5yf3{mzgqpGOc3!xs7 zLk-iohW!){qIF-ZPgEZU`~25>bzu%5YJ)xcp+jr3qPkp0R+<8mu#>*rBMG1^(Nc+S zTqG#jQbyA!i4LKIOjS0i`?AJB?=eB8zPykfg&p-0 z>$DitSS%X8P?OZqoI@BVET)u*&}F|Ch`JnOry0OyP_lkB?1L>EFBfPp3}$x}Ba4aw zKnj{Zu}bxUW1wOUor!!(w5Sba#hB5J{{FXB!c(pYnuHw0^{ zK~`V1s4W>p+yXwKZTZ@yOCB(&0gTg~3#IZ~e_!59sv&n`>+IO>uvkk>O&7AO@#rYG z=95`Q)$|cjo#pcQy^?t4)ktgOZJm@2{5jvZOe&?Ws#aTn-!F+^dlR6&lUa({%)GSc zsQ1GmCm*%7{>8#X=&0DH)gN?)ll;Px1DQPkx0(VsaAr+YT*hgtHTCUh zYf2+&Ks+xQ^xyPHD^51dUIXaYvc*ez^S3z!+XuHJ4-24Tz0zB5kicSDP7rGALRt&c zARI1)krCx7&q(%>LrrvHF29d{*N!g6Mwv>gC1=RqTi-C70Pj9ZcKr&eAKUT7$H5}X2ED@YBehf?PK5H zlg(>qdNw8QPJ}FqZOo}EmraUoY)R1Av$pVT2=Jp#Tp($0ce{t6Svt)AZE|9d$PV`Bg6y$ z#C$FQnLdRK`S$$*AGq%pnqN9kX9cFXTqeJv(gdb;C0e_i45krOSC@RBWu|!7x+wAI zw9$bxuc-l3k_a!poR(kuwq4X-$Z7D1p=MvPQlxzZb|eQ z9~dULWD1f}8_YF{n-NkgCz1%KE_cm5#badgghZf$6Njc}1)uqsAhay2%)gOfV?GCA zG%JAMQu9&g{X`I6RtHhYm&>HY;fE6%;?d$%&O?8C1#B4!xR78Jj#IiR?EH;SDXrM> zu&7o1QdC@QcQdMwdmRUE6=w=~E`9K;nqC*PaNw3{ihk&q$_WzUd|}}qZ6c6TR2Ur} z)lZ8+pDwPTv57xAH+K-9^{+QvQD5ET!=T)5OV#pD7=*u5TGjk_wT;O*l!-IWV=>I8 zRfQB9l~1u!iu;ds^~@9>S{JGQoTdytms4?XN)TDcleJrZP>$pm+x<$z&ukEpnIl?@ zpZM2r#<5BapM79e|ddeX0AHGytYFyOvJa^ zlF_WKmdom;AI#BiXH;LKi*1$*tn32+2)ylG2MB((^pHnt8qSBrVo)z}b(wr`-ku6$ z16(_7t%42l$+h^&<^FwO-ZJw&me5=sO8BB{?q{qaLep$x@K398FjDzSH3vVczMSTX z9uS<`p?8-mAshqQ*|mrT!oZ=bDBTta#1s|KH)mSGjMu=7|EoRhun$+{`tG_Ck;1Lt zs?2hZApUTkl9pZincHv#ZX*hA6JrimT2Q~k<-v-d3HV7LFvuwv4HJPoH;G%SJ1F3+ z;m?mEXg`P7)TGkPcv88pc(i}x0i`C#ITUyp`C@9?Lj%pl;8YClptc){aTgq&v%+8Y zrE-{?`hRaiyHH}zOh1U;#^fh9;FIw)J9$%=*C*DsN(T?_4|>?C%T>Gr=tS4%b4cZ; z;Z7z|sUMj7Ht9_U4}vrY;H_`e%`PINHYXRkskl*Fz2xv9dNT#6#5}SCclXp5WUBECTIXJba9L$9Y zia_(lF?KM6ek(l;b-@Aj;AmEL+Eai}8vIZHKhps;NB%4EHVoe?Z8xkFbl*P;{xU0N z=;TipbqzrYmhvSC-4_RNP7b|h#;KJK1+;5}Xhk=@bs%(#TkhJdbpy*+w-%T0-~(<` z{`rS0Qudqh4dPKCrJ4xzEI7S2a5rwfhoI!HYx{o<|Du}+BUP^yf3V6Z{sGUvgl80c z#N{s+C5RNXO#Z)#53WSd8Y^h7F(;46%hwG}!N(Z;v9o8o<3qSwSku7=Wm7krX*BS7 z#Bo5^z?XkbNWBe}lc5|!z@1|!5;@dLlaUH zC1&@PU{~(+J(iC|(&6NQDWvr3yz;bs9VDU_=81rd1rMZXW!y5x4yj!hpdv+Hp9kqf z=d<=OoC}qI%ru_UKo6op<50WeDxR1%Fmy$mAL<4{!_N-%?81VqL zCfG%A?Q}*$gjR6*8`MH1sy65efz=fYz~YyK2UNLJVE~wUR6+n`N$Hr=ScOHYUI^APMHeDq zflcj}dioil71%l!@8BSnt&R3uHr|>w5m+^>FAt_`b5}jlrm=pVk71Z7TzaESm3X=(`w@d>&RTM zHa6$DI#X&`u92QA7a1zBn@cxBSoW6PWJ+Aav?&aMf;Sp zlx!Svb}rS&jon|g5DBABlbX1k%l%yGW}n9T-Y&>A#}BLAz}Ww;ZcFr)DRN1RFB$Aq z#r(m*KL3;*b328zeUTPiYn|aI%C=fy%JZ`b&Sh&-1YDaMIAGm(j%ZOSW59+kG!I7~ z0?^H8j{>wyUPA%a?bj@jSG6i+SFJ^H8eqQ;I@^&CQn_4Z9PmvGB*Yb)DG?1=Wq<@y zv>NMssoHlGWlmmcrpx+=DMD|v*GPDUl^V46LcvcO|e_N1Q@S;UvH0Hm&I}t zSDWQ*7lw-+c~#!txy?hwv%4L+i_} zEusAk4(<3X@q&er=Y(=b5*AVe9!Li|qS_Y3@tC_uE20~O4O;Fc(4$vk+hD}e?!nUz zjTFAkeKsHA4C^c>`;LY_$1G=quufdnJp_hRx7q;fm>ybKK20T85PGu$xHnJ3$<_qL z<=1)Sv4{9qa>*{2`WvjR{e}hvS;Mp_yA{y_bmjlKp-4zN5FCyLOin4Qq|9MQn z^L&FtoiD4V!2bXF4SVBysX<$J;J1R`XN)!rp}9`LImUUFpLvuag{F-h^P&A}de^TS z*l2z9>;#@C18yv6<$yF_d%7fLAN&82&ELB7 zLmLO*y>7|u8ExLY68paFGt0)+fz|nsAO;-&#F-|kLLmI8OjZIflj;eTfCZ%j1I1!H z8n86QHaGt$iGZDfIxw5(GunTd|NUtFKTQ6wxuWa7JepVv7$H%Zl~Nl0U!qZ9#G`_( z_OA;5FE;?Prxol59H|wp{3Dh!!8N>;6=k?l7RL#SlE4Hz6d?Y8A}UaJnf(JsJO9No zu)!XGcis>CE86an?fk?&? z5WUCXwEtbjNmw<6;2xa6Ty~N!1fGoiVIZAMEWP!@$;{L^41ILeqRE!@xT=XE0wP7OVda+FeXwF zn_jYHLi^X_v$DG0%18B!{JWq3spJm&N5ZFv^&d;S%c+0WX9w0ETtRPI{OKND$z`u) z=GVEvMW#1-nTO9;@F`^k93vUCz1ONlnPDpj~BM5!?ze>$ju7SpG>*B@LxFjZ}3t5QiB_J%a4;CvvAG71ElppGsbQt_Gum*z-7maRr1UK2?9a>#KP9D=B%oqQQ$OeOT@6t zLKR&Zu8zp(IX5ZMiLZ%FgYDOL_tm!1H1iXYAMhEIF#AjMdjUzy{EP77p4OC6m%Eky zUVSzF*(;Y(N=CqMd09KAm~00kpap@2ue}MOQ#y=gTavfM$ zHhDPEB`IeRdC&Th-4 z&Jl-GUQr0)gO8aCaYk zkdZg}{ol9yzODCv^;PY@s@<(R(|ykAzPEdN`kvcIdRiiD(G52r62ImIs+iQzCJOi} z>ZbxGxh8|C(c5Lr$_2gNSi88didgUTy>$XduxEGuur$+G+POIyMP1sQ)!A_>9BhGr z0&Z@c>MrT%{+|R_3YFsp|4c6a$pqWBkk_B8Uz{estf_6- z^(6t3m(rt+A{ieWJ732#Uk*sh=QZ=2_;R((9=y0l>#x9V5*T`2AV#>xilStQrqf~&;x?CJ***< zl(MkY7RIS+JCkC@2ss4Ub>C3d*J;KevBq`q(`sb|7|P%-KCQr{b?1>cMnyiygg^^Z~5dXw2s0B`_w8#r? zZPRN*fa^XV<&Q`+tJQ>nzFso_%#T>QnQQa{7P8&2t9vGQna*bOZOQ1suM@xLtbn^0 zu(@gg-=!QaoFxqtd60|JeYfWFI4tCx55@Lp+Ky-`VazrFfEF#0t_Cx(!pod0u1+9n z9UAgPj80r;u~it>Rv`ey=1c9_MbHm@ZOUyxyy8bcE5O}lmZ?~7%$(DD^8W-Q_GEqaQ_{`Pk7Z?qXr)40Nz_mE3+t zzx)<=Da4z*(96sPb#oPL0XlbqcVS?UL!CwkhlQ^2^S zo6GcYSC?%Yt;mWi1ApAUa`?a<|2%prhJeY_?)Ir1SgBtyWXICGxm8C)-Rg3p<}k+Q+JLz=?LKXKic_aG^y^*N&Z${)m>w1SJ}b7<=e9pC3q z#IbP+g-eQ&4n^q3#z8%v+j!n>bB)jAv}ZploS@6;inBC4Y%FWGpE0T4vSu6GpI1bXP7dA<#!W8ey}G~Z z<7*~ctT*=9r(Q)FV^v6+QA|4hkgz|nxJrR0GHjv(-mfSWV_%5I38JxHRul}<@qf6K zt2sP|dBLgvvrCvZ5>qC96$RyP9sPg4dqeG$;C~zp05c|YR@Y;U?t0YE#wLF^LQv^* z9)nKP*RLFeI&@7IyrKI0%O|CoH{I~-+Un|IJL{Z18sY3N;3LSeX1KaK`)VC_1B7+~ z;1}rt_yaibDgpGcYY967!S;ag)jA+_5plx^gnJ>*8$oxEh=&nI#QwzlyRLJ;n{`A7 zVijbHxZ4N8T@W(>XvaGAu8~~tarJ4S*cd2&8$tdXQPHwa07H=X-VXpTjxAvTAoOt^ zIs|~8AYG~nh;2*wEf{z+vJQPPLR@PjdtfWm%D8;8>E&08IQ3E=IrZ8HIso9G1Z0{K zbMQczGi(vrCmlwK>@Y#$elr0Gy#c~5<^j+FAbgBy7qT=FcsIj{_|$a`LYyOzC7_2*BLp-7 zbU&7W94p2^1PDGtgg8ZZZXfhGMud0-!gc}hy$B$DAMp#c4qBJG-UdL=EfMpKx1#WK z5F#cI(US+8Lcp+B1`xl95Z^Z#y^jOiOd()|7vc;6y9YjKe=i5XVgM^uQFnvuh#0`b z2nap_yjKB050S27%RG>Yi~0G$EAN1W%-0}%k&ZXNt49dVxS zFpq#C_@O8W!n$+x@g|52kpLpQkUJ9C zFh_oxj|ARg9*u!4Ou5z{E&qNs=*58L16WHA1obzcjJ$gv8fpGKaw!7{u?l7kgzf@( zMemN+5i&3Pqwe+*7gd(PO`xF2h|wM zjIc#UhRv3zWKZuVfZ&P1G=%yZ;sJ^71CYmRJcZhb6M+{)P3JNgEgKW}sfzQUAziVchZ(>_5$J9i1O=UX73Y~j84-(& zTcC%bo6LawE6@YkW6_H|MsCUtC{N(E#X}x~x|RVb0q2{bGA)6BU9yOQ?hNl{20|~K zfpDWV{J=}G?@GX%D+CXGj}!FrGa>WAVV&{>sf0AsFsyswls=t9h@W*#6SD)0uAG8DEKpBS^7q?A; zK(8--ptPUu{^WX>s%P3yCjrJ(Au^bq7e#;A@}~5Z-`?_rekU??Z#W~c0Go8ISG)*L z(9iiRQ~L&Ixu~{WQ{W?wetMoU$Qc$2f(xyju~wfueOK@DgM#IyN{79_GihI)@XXh_V?SfAck!@JucFUq(FT)9gu|U(>snT zOoR8c1%dU&!|Zxm`t;nS4nmdTUs)UGjkKC;rO%eB@-nl|;Ki@I1iL01lYMdXcwtfg z{(gM7P=Dv&dWV>D0T#bk!>O(v^AyDPewfd-$1I|=$VHoY?9k}YN1MYc%&fuLS3^0ajiWmnkI$5)*_nLgM} ziriP9mX?YO0^LMigjDLzW=^JdMarrz^#z=pX#NaX*_d8s#45r>)MG926q|P*q|qx@ z6d=YgfIvgE=i;(BE&~P^wfF;(tt=I{AHb-+pO`)ojsM3++5|9y%|p`_Z+ZG z3g55pO@(UM5!!mKYkM_VEM+xp}#q~n8v&@N}NM;sEDP{VyuX$ed|8klbaxL zM4pD<>b(BVd#5yLK)Knbv(JI9{u}D&`^u_v1IhQ6@UuMlp)=wE`QBPbJSKqPL|Hf> zge?eB280i&#AT-E^g^N6t#%WZ<}>rTZq!ZJ7Bh74s0RVyO$_K^8T3#DKnewUhKfE` z6CM7&iVtbH()Z3w{UEp{{L&e5B>{1_GmTP0D*%4oo>xGe)6KV6&ymce*;%i`g@AcW z-P$l12=T~>I2^D<9OWTpYvEX4aUSB-61E9uY~N8&znyXmMC=0)MF7|`;Jy*mUHN>- zslugu{o)EBGbb^%RxZ%RPX4ruH>-ALm)lUJyW!+rZ|XMI8>utsLH`wG=Acz6&$Qut z%^UlYCTghzkQ;(Zw=la|`;AKGs<{+&0BLm3E2=8DX}?Q0On)k|bOkyr8YaNhDofKlBj?DI?%lQ?AeGLL}ZIW1)6s`S*JVS^|@@A5xc425+{hI=*Cx zj>$pHIBe>erfomQkZ}m2B8s_dzWwRHao8MK0x@gPPTn4N`Zb2>IbVwDy~BL%t@UF9 zxtc-TZ`UDiiQqS2gk_dD(0zgqp-QV6gY|)z4R6mvjF5lPSpP&ttpv+qyZeuS#?TPtfjmKkyUCqJGyh0qdeRl0N5u-t&N2gs%0z z7VF>;jrC)G7mDv}e)g_x5L{e#r+v457L55+yRR>FAYXfa-k&(*M?6LaU!=zJ_|Zhn4mABMtYh5^drw9 zdUTZx_59&(e~LXV(P}E6-1CWLh_vyPH{eOZ8w={`hA^SgpD(7qCnOeTZicP=(I7}( zlEI=p4=hN?#0)%kI`0I?zVt+Ct|a<7zuMi|Jz%_Me${mWj@W;?o z6q$sb1$+DjD8!f_y{IoSS?A5eLqIj{o4OBi)x1j>;^Rdxxt=$UPs%fjI5WwyX`pP# zE56M@@2s32;Bo?e7(ONp-a(P*$I&=N|AYEIlxZ>0=Sxod%ZyNzf?s?Td^ZH69*mrr zL19uTJc-A|o-4^KD$#PN1!OO&)XyFhP*P#q!o>Vc*S9T}xIYbm5-4UxHr3LY8R}}lm_1%^gTPw{xGiPCN1Fo-_a39;%q0P_j*d?m?4`utWMYb1Aml;y zwO=JfCJC9E&jU*mFtKzBI)fepRB&UY8-Yg6v28zAJND6yd94>t?pLeyZW*H(p3K5f zSZYwV1+jitHS>Ob{I$TDKiENO4eNuW$7dKz?c=KzarIFqnY7*1a2ZuG zLX7Y-;yS7~kj?2j^qI7?!tfov!cMnwYm7mYd2)QIRuU$+_)+{I`YigS?gifR0PePs z&M@K;rj=pO#QtDS)?ngI{5E&gy2fPsNMZRf+&oB650t>;1JgY=tDMW|LPw*l!LZy; zNuO%+NoyDi%iis>YiQEl<}S{7%Khf$4l|@rniyhtv$C*GG3#axG}L^*c~!!uCflLV zyWd#ERwrw~L;@+GQ|l*cR!a;N53>UAR)Wn@QLzvWFZ(+9n3T6Hsfe?$!7anIkHE8RENvf**WfnFizsv6P_I4vwI8H;kn`$}&PyUj*8DuoQn*+{i zB7x|k^?|+yslXg?1Gm@JgYKwibT#F5|3 z#8^uRpgA^Cb@(BhRG9eYDKp~b(i%H-I@OmPTtNnJOG2r|gA;g5dc}(@ke$C(R>t!H z-yEnvL^t!*@btrkaej`_(@Xidvr-gZEXw)TIRG*PCoJSFkM>?{?Y@Ao)e zJ-Pq)Btr}%zQU8{o*&sFTx^2!wtmJJB#|MJlK7E|M8@kzNB%6U3ifF7zC0+!n6`fe zshFa#N@#m_o-|6G=Wr9+s*rFKQlwRf0whxv*u-ZoY$+{{KMyLKxU?Zfl3M`7)khuG zL&AXwk}}{c*+F+=X}60gt0>3$?9j=j+Y0TOdxli(H3moOUM+=sXIizMMTbTElpNNwHsore#~kePqZ!S#`4rXURtf{(^*>X#7S|wuG<`=S=Uyo zi=6D|hT^A6)bpcyfEn9f-iw`oOjUgtHvy=^ozi+*Pu6S_^AFZ-V#H@aV{^{Qz%0Jv z$JWKAzN2*;%VMs+jxkpY>|b4DOm=giF{bJLb(jkdtr;s~eCx=WYZHU#B!jk2Rsw6J6jEd9N@C+HGTUyB zy@hmpcA%DfqxnV|dnoL@o3C->jWPus*Hjr9QX7R+ z*KRTLvCGm#IkI>hCnwJuPB-$AdHTf?j)^k%=6b9H^(hNh%NxRJewH?>q)p~46J=Sw z97vNlA8SWTS}mVjcd9q`E1b!+`p3DWW^2NLr*`vc60?+pfqWN)U@meYu0VB$1|N6n zq-RNPVl>^qDPoHva0G(QmX$-GV@vibjZ&7rO`L~i;;Kwx+C>YkH)fke5~{3h?n>cB zMz0UOB(AArF_iRY-%-`!A;t?lKZMPvrQv=N)93lHxNFWDoW$`1PsRp6she}B^{Pba zp^7b`g*U(qTaBUDwnu5Dtoc~*u{ucmyK%GlO`DV&GZ*)0Jl^5^awfLqg6zciUzX%A zsR>D@r$2v9{QiY3+yJZFCLtqrXOFiN91bxL@#^{@MBi7Rq2qS$$Wh_+Q60^lYTZV@ zuQ9{bLh5Kq1KY*1H2a;OOx7V&{8;L|+O-phqI8zsKKBn%GM3!2)R}QySI5#&aZ!CO z_B+uTIl3%d`Q7fZut-}WKDLK{)w$rz<-e6H4gHvP7-JRHCYoZF)snFT`Ix147K}u? z?T|=wO9op&(-@mwr4z>xwlavavj~YeEB~^TK3dkGrh8gD)|9xntbxznJ%*uWziwlq zdh1l`-XLUVWt+mpf<&j)K4VVXyyA4)scs)G6P(Uh2CN5|7G_#)X)|r;mY8zL`NjLN z-M?ojwTl*M2^=>I1Ex`D#H3G1tb$lD_%|IWUcMp&5FBAm+8n8`#3Lobq~*o}yY(u% zKI>QFVSAG=v%Yw1<2rM5Wy<4=Yd9cm7VZHXy?x z3yqkMBcn=yhS6HU z;M=fyL#MukhyikzBNi)jiJtQ&T4LR~NQR8`V~+y4x+Ql`y_X@rjANAtdn z_lSE&JdaTj^4o3s&0%wNqBbYsgUG=@ILN|@NO9jyR4lYwSW8~Yv9K!XqdM=iq~sEj zQdeY_=G-I}BAM%?A>N;@HpzCn zDv@XSwo3A%@1#6Y>I}! zHDMOW0)p}TtOH1=9Hb!GZXvq_<=W>|n~(0)FV1jf#cJF_h_K@>jz{|B{)IL z=rVlBDWhMEqu}I+HLoSOzMktUjF-5Hc7Bcbby$+2f^FeggZLPrzD2mGE$ z0+wrrgNaEZOXsRgE7hUXCLwWA$pAa<$171%hzglrYducn1!JmmJ<+uU8>Zd21Lq%`W-K zVfA&@CUQIsLw$O;W};DTiLu=E1c-nezs*vG{0S#o~nYt{)YA4Ps)X=EV^~YmqM^ zCSj;iC5*K+DLkGp?qZImU2S1Ti9R{`(q>Tx;`$XY88>(o@?i{hzIn-w_H8t!FYo-8 zmRgFFhH-5D&-mNg=9$Glk$ktpYWgK$bUQ5lCr+5iP6u`Zw_!bVp2K|F*b$QReyi4( zH4Yhqy{OQW{kvJJ#^9od_yfh@Sv5 ziLwu+J!btctSUTf=oe`>5?HS6sbG?RDA3&TE@C`3HHYHo$s*Iz82o~z-B^82*9cf2NxY)X89I;mH6 zR`n{8{dQ^B8+&NY@8QXzYp2Ds-u067v^D+HInjLAi=9!_#;7#GW87^k{#yMPlJnG< z-Xop+Dub2bFB|mX!>ys>FY1G24_{rf6BY>!5pAjNqB(B7x(sat*-fSI#JI!=43Ye3 z01x>M^Rt@|jkEHvxc#M{Fd1TOOS$+!Fm-}dlW0rbT$^i zWtEJ@T|wXyA;f-8Hw%URCIsD0LVB}&{? z8dL8{UYDvzX~xH@?O#7AH5(}?7L#hAg(Q{o~?iD zRlL(qr+6-_6lSDJkN-9~seD8ZL+F~MfWBt79_6X-?5^X^>@HI;s30DbLNc!ru)}o9 z5>oZdgZGYUw*IF|~TESBKm{ey` zT!81G^N>Pv^~gQTYnFliw|6wrtauM}`Is#m^gmjdj$J7mzEPL#lJY03T&PR2G|+4@ z1rw+7zh6(ABz{eWZ5Q_0$+4(bSVY8l)#X6wDQfqJMKjhT{bdCpU{WCg7_f~Ft) z_7pogjYrRT%-BG3WRXOi97ONBJxL&TvtRcb(PZOn{%m1n2~d=+ox~@S+o*)Q3mOoU z4(VvA3Mx1;-#>}Kv9oJ?^=g61!7Um6xEF}SR}^`u~0=es7#eI__0Vt`JvO?F0I+DqapT_QD!GxjfCeT>{`9*Z58EN zBMpt(uE!#;f;!XNX8M4#n$-;%lt)4#tP{KitgzS@*1EMFf(BGkg6r$NW9AEP6~W7> zko(gJOkXpVxWt!vdxv@ zm<8Qq$;o|v$FDV(j-r!y(*}ta-1*t%7v#CT#T6GZ9$V;Jiid&bQLQV!e8LEHGFfW8+fx*aep3sl%bP_41AuUz$Q3N9qd2u){uF^Re$!) zgC*e_TPb9I?(M7B_ru=QLJfoQLM33nMq(ZLeTa=oLgx0}d4aQrHCXmZj$|`p5BhTX zxAe5R2h|1RSwW$*NqG6Pv8U0LSo=vqh)K}Axzh1>;`3{dH;d*<4zvv&(Q`UhX8H~y zf3YyD)sDH`ze(HQWcqJ%@;AYu{1q9DB3V6J_MA@O*`G1)dnSuj zDPPX6b_md+c0dZC$dVY|YsfX2KgS=CtD3Sl6uuMaTVA~^@6Ab+EYNGh`2@A(N~px^ zl4;xTXvVXh5o}~|^OQCtDsf2rxG~O6it{i>(F#l1`_J(w*&BS~mbcVIgYEJ(tf?f; zXJP)8lUmHlVsJl9DpsG}t zUvFtlV5DlR@l$!$KUU$iM^%T;^_p1ZX7gO@J)2r!2eSS#YYsPVtYU;;N+y?U;tq>W zz>FDNb!fO0o=3yz>k-4CCThhwOu^lZ(0~=yAVeiz&)|`=w@SgPM$dX*g{M1f8=7L6 zdoU%;57VWbeii4aDDu01C^4ZS9>0_38P{)RY}Tftd@1Z|W;4_0Uk$L>d~rs+sa*0} zoHGt(s9fO+`O_?dati#;Uvv z$)lr)GX7hn_ula0$Iw*z8v|rf9~Ozk*7e#!edWU0&LA<1w0B&Q+CRhsKMRyL{`7b0 z``VNb9rYFBr#nx-DT%inv)nx9-Z&p9&pVi=7Shs#3=DK8<7y!Um91d&kn4A0A39W> zf+uCDLOVkpHpKZZO)nGq!5ad4?5<~T$L1X{)%#c|@=-otV&K%b=lv8Gx@gmXAZXOrSPa^EcBSYe!~EY+RXJ^mHMa6(r&vnTOC>&+Fn($|@y#R1vhq{Hr(R94Dd9Or9;w2Lg7rF$OKcPr*QSlPqZbh*ui zDT)=RQ&aRb^i5yMjxp<**w-eLiW*QXQ|L(`(}3YSNEcILv#tYyBLy1{0&0lin>|EB z8)@Aa=YGCV700IBc06|=;TUM@KS{H16+BbaPx8$*E=h7<0w4&{SiDuY3#$)olgdwR z)CyL$4&zBollXB>BzvR8dc#9B{mCt0{IESdtDGzXM*%QxeM&aJu;a86Tc>CudE+U` z+>k2JBFh9#uJuRfW@Jki(4=Tkfx%xx!A`nJt`}%PFO&YBRURcEIT-fZbA_@Tqp@EvM#VN-0cj z2L9jKlDWe4+L`g3ngc1N+iEix#fRS0?$UOWdBQo`nd6+A`zfVYYBTr6hyK&vnrH5v7updbd9UiVXXq@1%?CqE)%X1;-I<9p_wEW0<>>xqcJTuL zk=0HBC*4_PHD^*v57lO_i|u@;g=OqAbA>gvGfO!&uTo0y)n>}#Q}ZPC0*_ShD_D2` zzfAZXsqR*=el3eP$d%Olze`L%q`_2*C*Uen#+k&@?^%}<6hTAF)k@lFm#^efepAM) z==(GbFCCOZ-%lx|3TVpkIfZ!h;ABOvzfSLWjFRF(bL#a$283DM%d}xX$`mq1T4#M?>0jUMw9z>^?-}R(tPtHg8JQT$j*g^)}|@&|9m$tN1zHuNTj* zNA1L6EJ3%S9igBXBkdv>wA|Gks;JvBIz27RC+)-ezkp6}m6c4!oqnl(LeDwRGp7hI z2-`h0}0pZ(BQgqBWAGlz=7gi*Y%+HHn9;UsBjE-YN(FU%bL{ zKO&K|FJ6ROQ?{MnoC#E5oYOg1Rp6!8zXQKZt^W!HTx$J0@VV6buR!3X*1rSaOD*5a zaebq4ZF32L$1ZgC>(&2OLJQfBjK}Wv?AIB6qyN7X##X8{+TRB&h1WhLMfvzorOGv3 zNpe1PwjwftLgMP~kDb&$d)eJr2AFy=83ch>?|^s}4SURBuhQ)gr6OK#RR4m?EJ>Ng9#mObKE_t+2r6r0-O3)`XnL zLd{JHTK6{nD+b-#M2I}s?Ynq%a=Eq=)kPQ8z z`Xh3qwViNiv$aJlWJ64mgSj^XEvK3Y^oQe~AV~w~$`n82uEt}?nN|YYLUQZUuLYf} z+G&lW3tYzWk{L?6b5a~~4l+Yhh*I}0v2R4f{z0l8ksI`iUm}_mp?l1K{3b|4)7M9r zY*+%9EuUSA(p+S%wccQFwQ4dd>&b|SMl8kdcptq<^g=GRz*SqVJ4}N`+ffElZ{y;2 z9TGz+oMYSh8yBh?TOy6ii^6wK_-(9F*h}Fc{M}}g^D;na1O>2w|%;}0rdUNzd zDQqMmA?0V{|M-Vyu1bDHK1)_OMS79xLPSI-d36k`n84Yuo!KOzhBuu$ipderEjuC~ zg~g4zh)(eCgqL1l;kH-~m#v)GQCk9Q&rht%KTrVox z)eHKy9x!r6S?t+_Az3EK{p>sd&%A?u_p&BjK~YC))ugRqR;!=+aITkLaYt?qNe(hg zkTeJNMIIcvJ8V+2R1NEtiC3L9kZK+=J7DjtAlvDEh>vO0=4nOhyJ&OMCzZyHjh4ep z$c1Ks9CD#)Qijx|4Un3&r$afP$a~~kC}z%#T?EYLu$kJDYsI%>3IQ(Tlj7APUlP+7|LK&RbH@R|Fq%56E8Ml((jDOA&VUnChOjj_zGN$Ew zEO0-Ha3!`7xl!PrWYlz5KA0uiWs+Y0_E5m9c%yLmmx9tBMW7K>S?48d!E{9RO7ar4 z(&Vsi6fXWM4>|zyjuttX&UktQRq8{*LICY-)b?Zq3G%Mxe8kDaS;)zO?ZGMmO_OG; zB;;T$ezmiL|E10a^Lr8X<+`FJnguOO546-m(Ou%{Y!BN+fh6mbqqiYA^N92A9&+== z;CDLMWQuJLzw!w=CM7gIeUY_xnB=D1H!5R}xCF~XhvbrXh&u%-3nh(^7rG|i?Y2rc z9wj16qLjYX1@!qX$r=la^K8s~G#cYv2;|Q5?U3T-K8bH|uQzxbWyL+9H>#J#p0`V! zmX=oarq@Kvs>1R9fp2>qg2p;IS0k#d*PUCPCvR`M())UhJuTkBwCXU09g}63DYT=J zzZl)t8ROyid0g-yTbT2ck8l6D)Xijea)dd@&ieM$no0~zwxK^`8N`k}uT&|g z_OUe%Jys^fQ_CT##mak5>T`8)R$C?=r>8rihE z56d4v?ch?eRZ~;ULJhdyEktzT;qb(i;W0sjF?e)l=t?Im>4&9y=P#-Dapl*@v9`K8 z@Md|>;Q-O`zdo0ku-Z#cegBuoUAF$RcE~amfd<0!> zk&dERaZ%(^I8T&A3c1&w)`JyFE0C6{5QU8emIk86Eu>v4PBCKr{fur{9NRx;DX`t6 zRe|(#9^$eoq`T4lS?{%CUHjC=d_!H zd2q59ai)|ob29EGq2>oOgw_{Dqp1Qr)(9fe-m2XBgr-Oizo)FOcTTK@;Ncsi-PLq` z_m9!@e*VO8&GxnJaA9PCfI0X=*~%!>y~~lY*bH2sU;vi6@l60Y93!iBr*`zm9?P^m zw)DaNd`*%qB%8fqV6=}}dpWNV)5$6+th6^ZhO_{RCd6~ zk&!X zrYcI#1^){18>IWI__@@x;+TSvMAa{@^3l}x_(QhhimK{kuV3{((=yOAzPK^{4FY2Z z7sHQ!UF#24Da^dUW~9#~+;abDVpDcFiGkcc(NzCIR)IB+xK3fF@OP2IjGRV9X;(|V z!=qv@x<+z8B$Z>Y_~+-?l7^kQp9^kDcJ-=13?m2iitg2g$bX$yrKJ~lWz#T4LL$L#HSf%)@69Q6k4Bs!Z`2J(|3=T-m6G94 zh`sqbCGUNbxeu~Tl(2V}12`z3>h&T8X^82~Y+oA^_MqC;SR0DNNzmXBh*!e%;S4C2 z1at4?G&%6>%$)QhHE$>4O zqVo6N-nS=uP3L0Pw-h|`#DEuV`IW+B53`kDen!K{-C$lrH-9%Har2TT_d-{l8R~m8cl(GhexfiygFdz%Quj&%TYNm| z#)@1I7?X{=BAdX=K6Ah(S)FH+laaX0l#1cqnF=5{*!Hqi-~JQeyMe+F{Oo%nXu`*!is}# z8!zGRkH{;G+5QK8@PAYj0d|>r!eiQ*d;g&(LW}JJr-lDv^J!RiTujS?*}J$rR@N7mnT(6WGH zho_*|csEw=#u6ZpUy^7kF^Bex1NG3O#i9*D{ltv-;MmN)k}f>voaWl)=B7Wq=yT#n z3kX}KxgiZl-P__DB1m_Qv&EhitI&?Yl!6qb%~PIfZ&?7$YmrMc6c$P79#gfqdE73p zb{%PA7JlU^7I0npj_I(#uExBUAbw~w^cfUxm)`0{go@84vTv8~@+TvkBIq|oyoy_0 z<|C*kFV!GNpgHmz24hg-%;FTe7&HB|>euMZ^ur~chyxwkSD3U9VNW7{4l-oFxB2lb zqRU`s4Tg$G-J^7yW)@FG_aS)vv)3OtXMR?{9TZ>68@1Pn?KmjpbQv3HL7;7do^f^y#WENJq8 zkhA5*`whF}tU8`RqS3Rs9tnIVdUo*ny|HU)b)DNdUAg+!Xq1~hiR|*89WrWxBL9h9 zr#)*@12Tre&{%O$tjk%C-2^Pgxow_BzN5iGhriuWQeld`a{JM+eNY2T*rJB)9=|9KjZ z-MQ^GAQd@74-O4d^O{Su!C9RVU8<5=!!9_odkH=Bw!tivVhF65r=K_}pFKgExJ1jj zIYkDMH*B?l9K>TsuG3G*Iw3V;_kqSL27xt_)r%)!)f}^{_}Og{u1z~>e-?BbH4V#T#mYdAPT{jAqBXunMD5Nj3fE+X=kfOnXd-ogHv=~;N;=hvFn z`jMH#w@Q_YT06CsKKizpkGuvVU9W0uDk~g206w|AaY>Qo-I8aF$O>cF_}f4i95_+S*DS39(?QVArp8n`ln7S$@bE&msfGgw_BxXxCDOc6le{z zKmR9kur}0{@<{|!GF@$Ds4Ht_CNe_x;N0UhHT2zhh~n&y=6zEshx0Inu!xTvvrJBQ z9@g44M?2cJ&kF++Jf=U?#_4@iUbk=GZqm}J=Sk^Fywu}oJ7J-<(H_Ag@B2Rj`}<68rn~*~n`G*Lv=Ur2a2(I3)F7fr}xj ze+QdGQb^G55Cok5hBnb&&3qdDpA$1PpEQsqGN-?qP|lUvAUE$$^_D)I++^!Z9dLXsSxaq%MU@X+sH>P94AQb70;p0;H&_#<802MMOJN_M zkRxTK`wG^3041_XwWsxUFDF~8%p>hBk(tmwhJC%igob?Itn{s;08Dvqhx7J}v*J#~ zckC|r#VLv;g&BUS6n>h^uIE-NMvCKqv-y4!e*ulfDGyeN#kU3r`=PJkaBis@hGKKY z9SJMyfl1YEzaE83NNx`##CUnf@7-X0ZOprSi^)er@$oREPh{H-=@U8cN<=mtK5BNH zq^jP^(^PbU#iY+Y6&SICT@0lB~3FhGuq<{`isk>{pxI9H&Cl3=$?n*|16e3H-ym0XFh*nSmV*`Lw>@ z>$x0_osrk}i%OZa1up9pd>(5pFx!-LQ8?{w-u}=vV8waAiXO!?odzb+<{2{0XM1s``nz%pxu28ryosKaE-U7JB}j40=QiH^ zU>oO=K1z*F`|iPN{OOyjG~uyq!62Odgi8XPhFv!?4x-JhIb__g%kLm_)MISVKh^pR z0@gAZB;BpXUdAy=*<9E3ihUX%xB6DB66`9BoY-ji2)vp`7-sZ<%Q$X@llN)#OcJ^W zQ9+UX%+57eH5FexeyOxu`))S}5MN|@9P}E~E@)JzC^Y)n1-~Xjt%?&W<$Li(nTB=D zv}Y-kg##a*UI+jAKDG#SYej=rVxOFN9FyX<_kEGlm%^k`9DtK4qsmzyv9Xt2@rzz5 zycP{5SsdI374neGNo7UPjh0xQX9{ju<3mfTPO*`WDh-X(qf;ht-}&M!yCL6oPNu1= zrl_U`o_`#FED2aU7=h!P5^v&PRhj6^nQUdcPW#T!rcr|Sh!5E(%}S*4vs8-YG1e_mU+Y}Cr5mDo{5xyLj+_bTyN@>m-@~**_g5p$UT98zk?r=@i7$mPh zT2A5ZXYS&OWMX7u@zbzei_-TsB9;qOQ1tjQt`bA2Bh1`kW?ALSTMsj6WrY` zID<2U5Fl7^C%9_}4#8c5yE}noFZsQ<`}UmOclM7xhpDbx)qU>(*ShNas#&<}ByVrO z$<|hw=?5~`OkYyfsNGgeE4;v|E2f^8;G)WP^`_9Tv&fNV*yZLunf}zkC$;sxa?0Cr z5npe|e>*N?$%oq17DQ^jY-fTnwz@n}zX-RkWu}lD7pwa6cNJfV+GJc}`?qOt{_*}7 zcJ*_VFk&3)$1ef)ST)lUW04L$v&(Wba$boY4vUYF=*z5*SJ0jE3MU2sGjeB{)^CT` z9oNUSgo;S8Q>tWoPE4s36o~5saf%HvDdzS2tr?a0OlekndWO@!$l@I7G?bQsbmY)+eg)8(;l%WEOM*;Zmp3v@WNR zwKr0`4<^=HI!rquNqGNAXI$CZ#v+i#qd92t*U4I{tXNJIh{pNBbdTwt_^KzShmY(upSZz>A543R=nYUX%PR znjFe4`L1bOjF;vh0fg)b^8Pt3l;MxXg#|)Kr*XBPqEE_oK1K&|i=) zlqN2tt*=q)ILLGE;J-reW|z(n@NuWoN3`iUA(yo32D1O%0xOf-wIKl^wT-q(DB0|^ zM6RBZD)@tB3P>qhDXuJQEcLo{dYJD8Y@4GksJHs+z0dkL9Wq zC1ZYc7GLJ;m4$R5o!>>>0AGtI)#zi0hnL7W{sLV=)Y=j1@>-H1SSrn7f$X7}-(_@nLrzU@O z1!g{b7<>ey>i&IC6rzZ|bQjM5YVFbGe znE59HR3kIOj><&x8tVJ%({I*pv$NO0{6DVx&<)*4vphWJrJQS0_hM*E>xaHo&He;L zwy~9>^Poq`fKPk2ES4C*P@HA^N{TMd@{z+ErXiVCUmbQXZd7z73Om1FnO%Jcqhwh z^DYOeNNmXKcRxz){Lddz)T-k_s;SLHJ3JQ5{TFGnRq2Q0Gjxfx!<*Hd$lN{VG*Zs4 z)Y#vZUj(yg*A>qG&dc$Pi2PORwJ|s@2d0T$Gmx*Q`FN1fJBb837omZrYQ19uG>I-B?;NP?A7i-S4hgb8|tN3Hmb{W;t!d!aZ7p@1FZv-A&v)A_f|7 z0;NF-j!Nn$I0jGoU@5xBcsbb42z*a$9`Wlk45dWCduq3ol|Uy~an{r#AUeoJkU zx~N$Yu^7r=^*$K4LAo3l%W} zUx3pq;rdlYHa!W)r;S>4EZb85?Bkz`0h8(ZdrG0o^xn{A~*SJd&UTRq;kpc4> zIRYR_>pq0#0y}88QYTB*)qkal5@F0_>7`1Ry3l9=QdJZ#c_bUK0^2f+24z&LvF8ec zQam@Vce!PP6Rnglmu#{I{WFF02OmQL?3eoTN3FR&+B%@dw{-T&V(Ez3J2^vNh9QJ) z53yFay6(!`AYr#RUNhaCwFKN2^+IXDmc|3!26$@pslafnv?woMAl|Y;c5p~(eB{i2hC~8c&!gHm%nX1i8#^kQ z^Xua3Js}w;Yn@{$V+nZIp_^W#Smz&9<0aS@D(8Cliq@xjnYm6M0zR*AB3Wx3`E6-? zSSiAbn?W%qW7z0+#)=#RC2ln^QT{sPHxko5Vy_4kGV-H z8l1`AsTb3Fj~jMsJrWF&Sao>mU;B@u^2O(bzIJ}HxJt$?GSoRq9Ed%a(boUsiuCOh zl%c(}y{!UgLapiJ-yO(0<_2V4IV%%4TnGw$(gKxVpHKpytyh9T2fIDM8JG(=1mcum zvo-1f4&`Tu)Bb-WpGQO3iWB$&o8Qs%o=Snvx>e767=P|qb_iL|dD%=6u0KGH?o|_> z$*?@e;hE=598Ao1@)dml5Jh7xHzJ~m*e@kzwgVyZ8vB*J9nI8z9z#K_z)9qV47ti6 zAg!{H7QsIK~P$mUcc!RRu zwJ5n-X*4j=!xBR9SJSGUc@I`FZ{0=Rj2X5J;%%jLAHIr#fuu& zJd1&?ES90<2AOfhF_$cc0a`cxw+-bp~^TvBP80jx4*JG0fyuJJV2zHC{*T3*Oj=((xYk|jAIbUr z#=fT-x|d`)OSDYn7{41J(-V_BIN#){e7JBr{o1i-h~6K=-LZkxjM3}A=f4sKZELWq zvVNd#z9=EjH-KERMu-2?&2f4HVobMdEBs4Q-UIw7*66sO4HqR~*Rh6^RveUUhm|Tz z>RtQ8Kpq#Pl^=Ii1U**zw_&>UCXC7bwIVI47%6Ztt{g+8 zQT!Kicnlwr)s?EFMZ4N=*|Hi^ZC9t7I@0_g($3c8RVd5p%Vw17O6WTgR^i^dn|4?c z**x*k&peo$@Q>x^q5Qg=ODji~aTL9S#Kx#AVuE&$l*+UGu_ouWeR#PCDl=1>PbGT6 zrDC7TX0MAb6g-|vmdOl1FnMXtWxr+Gd(e;_T z{k|?jaXC=I+L+Ex>E+9b0o=6budL_#_;M=Wgbca|T3{=7T{4Gu)vxOyvxYf}8xqyU z2DHF?SR_hnT8smL3K!>`+{6*J=I%N=_!; z>vV|-9+igASaw_$%uE+)Yh>#w1=#Xjm;B#1+AIKS1;bAb^{k?NVHJ6wtfUKJ+HIe= zLzl_PyNrzgt0PaNmpy?^#5^ON3X08E7W4bNHld|+ZoVqv_fFjeLBnLJO6pOj#6{(+ z4*>*o+ph`HogH=&5&V1{JSNV!Sj11S1|F0xVvN126*E}_9hAE1j2`ybQfz8uH2_oM zrw_GXe4T{hNx5WqD6uN0Ckwyze)?>}>7<%scY(cfe*vU24cLPl5^?>Jc9b0x3Ue~v zeL3-OPV_)lc2F;o7L991WD4<16o($seOB&Mg3M`6YBGc&?j&M%1mPZQtW7Oa$5VmG z`rjShL(NEgqs&;gK>hqsT%gW}@CG4@%LZY=s4OW0h&^7-S26IP0w1^h$S^Zx2B+3khaH!^;U~EZx^ovt$s3ODxwUb-Y>*QaDNfy8-I>>O@&m zGsd_C{s@RW&&2cTQx-LgPCf&1b!bVqrb@8Qtrb${nUKh^1vk&NbZk*7^MKUH%IE~S zJxYPKyW4DYzf%GJ9j3-~)cesgx+LM!!w;Annz)0tzW_?aWL~;8wIdHq`1(dcR~=xv zPW}L33vvK#AsT=!3|bYl<`)1g*Y^O+wWPc(DxYR<1|sId-gcT)K|vZgl^LMsMi?uX zfN}oigfiAw&NS?_x#zJ^2oJ&aUdf9u0><%q&0W?U04hOt_^{5i8brDyU44-N%+*wx zWkT(f`i=V1%KM)UD{40p`b^(Yp7u}-sU?dzL?8F}s3u#hJP3$D9D%MNX;q(9G0;cv ze$J4lw41?=cT4up+8|wZ=$qLbHA#iW8WQymB1YQmWp*;z>_izHWh8;EZ_(uChs^Q# zaF?NF-o$q+KR;s*;NYTOO+pY0;obN&20o zl5cNNd!qIwPzWJ*+?YjrPx)4Vr!_OG{{FQBVEX>Rj9iBh@`uBO41ea&rq~~0_oYy( z&wY>nqYk+m!~uFe7Ye9UaW;9%In^qw>LJQMVlVvSGHO!eZXtsu9oz0Ikfj zmVGwux0Lap+#Zw#wd42x*tlOzc}-TkDvM^DZD(|R{GXl?hH1~ie*@TBptp552Wig# zMvP2w8!sA(;F_})FQ~!9Y>UUAH?m5e(x`Ty+1aH#V)ziy^b4jhruRmQYDj2QW2IvwnT~tL@Sn2(>%2)|*=+Cei zCHl3QMj|TOyiQ9ow5>Xc-6=l|5#b_7W~PbSlA=g8rd`v>L4XIV*)|$Dc^*t;J_wXM z-X82KOSfr=d6n*EJ^)uT-7?C_UY%e$*bm?VmxXspUfy6!1Iyek zvMBQ(LjN#nMNsGM!5Va&n-?}Mf;yF~OskBHp(L)<5}scNgaVM68GiNQwP(M_QkIRP zCDy9I)1MIwhJ5;=zaZnJyR!G`*jF5a?_^;t&de0kSo7C}T1pcNyK+*pIM=?>un)U$ zsc}M}Q;cC*9r}X}@t!%7vXOdrwNm!X7#-r;_SMJL)ParQEgo1QI*gEu6Lt+9t>+d2 zeClw+p-ThvT9XDc7?P_2t-R6une5xYlTCd+*Wl7hj37Tk)4Wy(R5|m0uzxNyiLO11 zpjKxCo5~2_>RcC_%0Lw*`7IG`V&}Mq1Wyd+(}$QW>j;BczU7+AkO*k&16=jxg~>9& z2&3MdiGyFItzjrDA6%1bZ;Z|IB7~OtPF-RmxZqLtphOLvCCV9WKZDWeDr@YRSq96Z zi9You8Jz0x9~BJ@b!s5XyXH5DH~m#s{gcV1%Y?PP29wkIlZgeSwP>4n4!OEIr#f-u zD=W0N*BCkcDg=^F{Tcrh?hU$!vgE}T|mtkYn~3Javo40 zq= zheo>L<_Kt-5wXXL?XZP+Y)`y`&PQ%M3nvD6tor2C7hMOY3bfxlSPy@i(~g`xBEH*% zt(D#o^NzhJFEp@ znW{$Di2)IS7v>Hn(@2jll61p_Aa{PAOhhLVMv= zsejn3r3Wb3tAPU`PcH_^@*B$Sb86cK!Y<3^1tEbifvPZdA|N&TY8sST?^(o40)dY9 z_*01Osp8mRC;SJ{1I#uo9~(wSxKT~=IjNyTUQ?CDCOq&j?Y-Z}Yr>q_u**6NgJ@rj zUlX-2=6mw7wV1sga&zz*rJGB6(v%KJZPYQ0-o_v*;#b0Js7Fq*0M6StYqc$%UlRG@_6J1 zx=)->jjTSI)-VY~t14<2hyx!0?l2ah=l;korBV~m9Mr)3XVLxfb>VV0p;)odq~q3r z)bk)%WbS5>=~_*Ewq?AqIhoifsn395V7kCXqKBu<&VbY`5m_2FmabK>IpEF|NP2cO zMEzTRh6_RX8B~v2x;n0)=M6v=Prj-Ff zn#6x$(!}Jl^_4KH7dZB%A&xBhh;AaZvO9bv!Joh56Kty;+gH4jNi}8ap3elsM1^ah z50`i-iD6h$WWZitZr%cO+dqppn`pLJ#0tyV2>gb?1O5@@cgWOrr^G-swuNH90_DRbOMqF zV^%;BjwlkM^4l86W^?~4Q!c*4JSgGu%`)M8!wPxoDC|o9#FmRmZ&y3ws4%EjXWeyU z1baZ{!>Xv<1@=wJ^TTXN*RSuPIHTT*1%F+HS3CZUpSq{R`bM2ZNWr@y&VjCNy)O%w z+}#WTy{fgEB)n*KKE0>aI5Ijr8Y)i46!;L&-e!g)JV=bqIVgBZV+Y)2rEL!n6nv6+ zz%{J|`mKh?3@SCE(7k@?no?eA0nkrLhz$E+p+mHkcha>4)NVtwUnM}IZSsL(X?J!Q@A!Akn)xEP%nVM_x6RR){I~G!iMk_<}}_i>9ZKB@RrzDyNkRksQEE@ zjri%GL+78v_Mc-#TCr%)7p!Oz^Mle9JtD?ih1tG374LP!yOGi#ZCIBDz!PVIj8g}w z7n3Rt6lL1^OgI#kMjx?gsvNzJ&8c5-c+X`@9+Rd|W!dB|V!R^)+7XeKp;Y?$fV&Vc z7R>NlcC5q3SM=jRqkSm~ETei#6ALWxxu}F3;+mo|H{~e($67}Ox;2th>5DxmAZ2)O zyJeqS*=FpTrKYpWPM8PU5GZ2$Agj!IIFvwBl1~pg=RS z*!#M+(%--}I&FcEQ@4zn;&X=SY;uBv@{{dQKW$MA&-SJ|^ui?o5U6f*mHt_n#6JL`yq3!+uO&#Zi@K6gpwNC*lb(L$xcl8Kh_V_PkxcZ}2_2S$##7Eyg-K zWk?tDyN>23c(JIU^P37QI5&VCfUitTaEhdcNL?1D@FQct zJC!sh5rNdCYf-?Z#ZGjvBHKOcOU>(1nhVXcjx-3H^$g#~0fCAK%Oq$=nkbOuYfc-v zhu3+M=EmDvyc$KUbchz0$NF`z{;0&QM{o7Ux|#Z>!djR1QAm22Z+(qXj}HB>@`S7A zomX^9drzlET^s(N%v_7Mv(wiB?5G`V4{V@6WHG45bwDf;x5K*j#d-{H8GeWLWkC-? zg_o=xO>G`9kz+y~v|^yoFZkM!{4HH7UlSlu&^D(ysXrWk*$?>Kc1jVv#rfq5&0}xp zQa=&LHf1%}Lm&&v4Ph^6w5Hw$PwLls*O8L1s7>a>{sM!GII@OO1EY2yyz4wIbQo+?iV_P>5-gx^mHf^CuA!5Oo(p!ulhI9m8ZQ3 z>;>(X$;fuwyYmJ9aCyXe_Cg^BdCPcp8SEkI?;z9%(MCwdXF zcfGy;y6^q#emia9AdMpsC;yWd|5-}?ldAYc2>9=r`=4K78bps4=O5&N;R80@zv*0w zfzcV1B=A6;6?cDj?(Hjj?4_51*qsYTXQ6kaS0Vj{QB5c<1j4*}G!XaZzMa_LkEupy z^W(5Y#!D#%k^!JcA1wB)w0dC+=F~#qU!+L;F`RH#E2&54LV|8&yV1S|ySjpIh%eKw z3FZk(GY(gB6fx)PV^sk#3f;V|tBc=w*gur)JzewGucBMb8_xw1>)2scx zSEweGda&1Ah@Z<;2q?qyc5A-wnKR>!@2;F;@MVw(W8G6=9OnjjdG7OcE}vUeY6vy! zBqPl`{x$D}(r+!uAMe}>tYPtmP1F$sxH;sZW@p}$ukTLr$$&Z}0?b~ot4sr`sNA#K z_^fs)KdTfonQGNx8H>AlPfxr0 zbTT;~GI%vkO(Srb5bDh*W5|^K;osmc2D$&bkOD_YLA!6_1d1aP@{IP!!9NW?ksuJS z-|@+e-UCN5AP1D|XXU@c0a+i&GRbCnS2O4I;&fbfVt<@V$8__*@vdvR7pY|V=W!Ew zc;jNkpR7*CtvCSg#RQbjTL8UXJi9Bg_jfBT4cew_dNHk#je z5~x6cccDT`5}9AK>kHm&^??m>QvfEq!#NYG%2_Hu~^vM3^uFz31?&6UIK{1Yg8OW$K@H;Gf079)G;{yNMH6 z{I2noG3u>;fEkUNO_@_HO{wK|92E%2^#XB{+rD?q-phop4iEp%mJD_e$JkJQzKE+G z8zNV1;5)75cmdNRb}e?32qC9R}~an8{I8 z8+!OJ6HXF1c*@>Y0f>+6#;+k~A4!JL)>^(cob{7nf<*nlYxSHu@vHTsU&Wnkz#_fs zBq`NqVAbF)W4QVpDB@MKp4O+0(2~8 z&W}p?YmRxFYQ_i4oP?Y`Sa+$i{q$pJa;|fA(&w%tk}I0dq^hzkj_Qw};YvmaC>4b9 zXK;~y;h2GfoH$x4sn2JX6UHcj8G2tj#_qB}i)*2kx+4-~E(0XD#~FR7)qbuSu}JR9 z{#=s*et`^%y%qnT30a+Sz%TGqMcF^_>d^thMFlRRxxAmaY~*tt1Du&L<5|=93j;Gv z?rVeijtzM!{^KDbfX5|MC^Nfw*OVG4D3Z6G>7fv+C@97Tr1g`#c4ezx4UL`Ns~N2r z0E=3*I~AP$)0wg<3S71)?;aWA?5O2&$Clam;@pBpz{Gie= zYARB5`7|yisht6pbH)C8+62sVDqIXP)tIsM(sk>{kAN%2VH^M;Q39u9#gwXqbtwQq zYUP>6C$0tnNYW&gIO$%g(N*CMDd?8(>@T!ukE<4HmpF9pKmZ_KnED$>7oUZ}Bw(p^%9U9hp{;mbfojQS zQvem`cq79sO&*fQ$pp&$dLdB?QN^wCk7FhznK0sQ=FR-7&Zq|(8L4SP-_~&Qilhx+QA=S^EQkWh2ao2SA+ZI!^_+Nl|+2!S>C!+G?*)B;kx65J3h{O4Hp1@Ph58#CtKy0 zocMME1n)iHHLsyJlbT-br$XC6R{wgQ@u!@|)OBEy@SC2e_urL$WFYrhaNWQYF8AnuuBMFm##OTH=OEt zp}>`JLtPkfsCNj-2Z4WsPHXbwtdH^kyAr(3+$*H1|HJt<1FJmG@&S}-yI00%`g7Xw z;Q#SJ)0_W+xC$_))BiV9j_|EFq+lTZ!33l~=+R5;?;aQdPHYH7(ZP84_bxrQq5kSU z@0&asVn1ibm_Q?$ST?^|Q6iW~gs|pqW$A(1V_Y zIyL=NnOBCxV8A^uwCB&tlj{w z6lmrBAIjxHWV(m-+iBsvBMvj{=7Z)iO{sh-vkAW)b%ooJC&Wol5-yp=$>DPwyUdC+ zr<`!np}YFLn35zJI%Gp+Jo2n*|jY0XsOuMH%_oyL3`IfZn3}FhMED*E&l z+xrzJ;(7`m9d#i>&F)rfwnn}rt95cnoLaVB6lsN~lA6J?*paV0EPTV~1P!$MJCvca zwd1++1WW#zp^IyrMUESlL5U2Fn$%w|Z{H3i0Opa~f0h>k9#0w}P_MV>G@Y$Q z`Mr<)v`7z8O-1H5-+^9~cq1aThe_TUNlBBN$wz1iCyc?4i+>o^fI8p@HXP1|TMM+- zhaI;qsVu$i4KZ-*nOf9fL9_2qOP4@KKaY7QG3x{WY+wrpdSrf}1cvOgK%dQ+U~Lm@5VJGr)CSPB0gvSjpmb>VqK}+F z-vuwIftUw)y~2fGF6^`>^7W|d_o8D&0*-a2SXA?!iDFnUsugyDM}N*A;fJge2uYKQ$^RZo4%AGw$E)Df2? z?-;$v;!Pmyqthle{2v%Gn4+3Ou0xr$u@4_6-LhxdeAzG=@Ooip5|GIUW}?_42TZA?vX4gSwwey^SpH z(6|(jb-oB}40SH0AA^nztabBJJl{{wR-6rMkVEHTkLpmm228H}+j+KOYz+K%OXQdB zllJT^y%j*r!TMnS;H(n_`vp>T_@mCjJboKy@Z;&l-8415C6?|Ne8_gYbaWt=t108R z<5hIt$t*c_If}5l%Ffp?!&Frs95kXq0L_+!&}vJ=rOu7#EZeAWZ4IbAN_?j@O`<=H z5JG@LD4L`pdP*5&@y$DAG8@kP=gGBpG=8X;^+0SAcelUXgt|hg4Bu+WzXZ7Ay}~d! zg_ySD0f4&}@T%28WUG)?EC3l&16~+-A=G}igpl0bR0zE~l>Fn^6kI?CKjG43eILn#f+QFA|YpmCsvaKr!yex`1nn4x``0f&jq`^pzSu!SMm2>g=nAYAZ=%!-bFj z-W-y$kya?_JOll<`f^KBiQ%Teq`oxKt>INjm_LA8NHhTcRLwPwwlvYV1#+*Qyb>8! zid_?Rzrq^wi`1NU|kl|nJDwB z>JK!N9yhVxi_;5lOp!FKex8+1Oe&0hc7%*adZ8Tmtsm{lAR52H8%KA*+>Q-kDvslI z7$=vocfeY<)yP=N31E^}6K5X!I3b47IiPw`lsk0UV z`b2*QEn=`)+v9D)gLb`S^2uM|ib*ijD#K$adx)V4_tw6?SMUF~ui=0It$^ZR z{~bk2qrX(9x3&}}C0zD!7H_7dpgiq)CP7-JcTo>io!PuJ(@~9a(i*OH=uF-QFcVZ# zz)A}LYv@j$&K48qs_FJAxjh}Xplz0vqNH&Cxy1V)ne0BS3#TT9)!PK|kd9ie>#Tc5 z$gZ)~fqAW{v`u1K%bGpJIx$UfCoJc(>W#;OMA$v0h7~z#h5Rcn4L%CUyU>wocm_!3 zhs+YYaS7|0aKTsM#g|ntJ?I6Ysl|{*jp_Tj@Rn7Iun$s(r&8QgS;dD>GQBn|(~%^1xBFX0dt6AiOU&3t&@D_`Wf=tsL z04g^HL(D-Es3tXN5E%w*fPT6;+W&EGlEwLAW{0p0)4?!lBe+gU7!Zi@E9md0D?nhs(!J; zH-9dj01if%J%N*$%7NqPBAMXEMl~TP9A~KoWB;HOBJ9^bWhd_{Kl4RKM*F_vUT%|* z4IYU%k|XS)Yb=57+yBM!)*)m&^f&a>qD}*;&ANOc3~OJR9B7Nf!t7D5bN)h$=&fm{ zy(V`Mrbskz6oO9FGMJ3`ZXPcp=4R{vbPf6t0L^k=HlRR9)`Kz;HqCoh+Zs}pS zw!uaJZw5P_#LCh`|H;xu5ec0v6ROvV!&4~tr}$NAJH-xE{fBS0LaYd_6o?V&G0slL z;MYDV5uz^%oQ>v8#WI>82HUq=)ik&#*JES&!6qGBmt!AYVY9AfKrWCYVXTJw0y9!E zmDt1U^$y$FqDc?FV5=J8#clZ;;)Hj){@g!Kj)qqA2w6l5km4{TdyN`(t3v(vu|7?4 z@lK*sg=aSqp5!w~tk#j*w!tKz)^8hmKakGkv-vs;Zp*|g_)#w(Ak-ws4~96Mk66^*Yf*+0_p$;v*M+b-7cK6M8zL?-3U2tBH(<9;AtZI>`S! z0y=+K396nmc#HQnkw<`A$xZ|`YO{q+uGi%Lr>rjd#l@GzA2YQS$_9mJTWjTqHDuex z_MO7iX7c3uKU@4rF0BtZs!oL+_P1%g%q5BMcAs)NA#J(U1+!w&eO=C%F@3xn_;C_W zUY*t$AT@4eMiT3cGVv%DVtp}AX|sD*Q(d910$K1Nw&mM9X)~y|w3))S|LeHm!VQ8r zco49&80U%9Nb_4818z&5E@?BMQtm|R0-qXpgyvavUt*!r#QY9+qxFdMC%M>!do6DK z%`$72SRI>r5>AybCeoxna64VEQE9DC>YKOCcOIeY2$u!9!rd7ZYLg~o2@IheyRym3 zsh8A4tRwenn;wA>fwUb22KvjN2`oqx2DHPnSNE`O^M}U)SFX|anmTE>HWvEY0q+b7 zT}d-+HDw?pHsm+*Iogy82s&gaW>e@Y7Xm{ICU<4=Eo~}8lp}{P5{!wk!e7S(CtO9s zCz$%{4t%asfYZ;0WjUL$EOQO-tQSc%*bcf|!8UX9JvN&Jall#enmEZcK7#7O7%z2X zC3~k}=*5zi@nO&+>WWt-9r5nivj41ak)Kup--w`#2Mt7+3~e#*?!VDFR*_}Y71Tlj zWN5-!9r1NHybpqt5~O6nQZezGDdby+as?y%hjK_4$PcQ5Mt5Kzk?M_ zNxh~UXqsMWzjBN1os~7okJJb(a7bHOyQ0aqvtpVSx_8tL-_!QJ+_n^fZdw`+d>{42 z?jP0L8UELzL(W#pq27+O#72(V5MjPUu4)R$*|?^EhS^Yl$A2Hd`G2<0Iq* zDg}x=m_@Km5JqBOnb0jZ3S6@kc^C1Il=O@J5bAxeEW*jON`#4m8l7b(gmZ0B>P*j1 zN-4iuytg_%Rn?QZ<{WglUMp}NTj5;9=N~jYD*8+0Al~t=?UB6er|W6jlm9P~9ZQ9G zT&YUt?@b#rw-cyd$FNB0(Qdmh2{RIT07B^_5#JA-ca5Wd!eiO=;3}95hn^13EW~4^6E4qfScW0T z)JZ*9@fNdT$sht#I63&b^UIEcm&;VASl6hcv5b=Q%P4H;1L$mNjlN7+kcKq3M8QQg z6!UC!+gM+H87CLPpBehgz6A+_g6)BZXJ3gW(&TR~`L$3-WD6lP$mtkc6Q!j3Da?Kz6;;DRXfKd-8+2+^M};p^wVudr@sLEh zOF@ zrBH49=rtkO))tK^kV9u*wDk}V#|K8hYj3k#^25#yLLA3go?4Twh+(hJ7Zs<@c}wXS z-eiU9QmR$p8>D8b-Z>v)4?nJ`@nnjv+B^K7ZeA1_JISJ;_!hr$*o|%05D|2mO4Z-K zjQEQ24xy^M8E&Q}z`zezn9w#?C{4+b&yiwoF)SZ$p)tT9)X^rR)ZurNCpFFTK;`j^ zait|zRobAVsXFaA_DBaOJ!yin$yZAR*s4bL`I;FnaU%WbJ^eo>rnAWJscM>l`JejEn`x-z|DTO zt6;!?g(|N7UT2s3nB589`@}Do_ZQh%J>6etHnUZ+430u=a^)lpRR-!1B-G@WVdpPm z^`UX^8~AQ*?oq(1b58r1`bzAD$q?_{%Y?H#}_c?oN183;__MaTrR2>%#(Z0v4r|lb0f2YSNoD9EL zkLF*GDaI0-(s~qyeo{+I7#y~ZWZv9rbE;(|BV~Gtw+Cy8{z$b-{Cd=@ej_ZYo3L~% z>02|RZ&cV8yhBl;zZ2=pagkJ+^vb7d_@95?`OO&oHbcmIs%{Wzxj}gmKlTmr-u)O0 zk@PpU)L4<#2g+Z2qQkrtGjJk?UA1BcLFC&D6avHEq2uc;;s-fMj+-G!VJFwD-^xsX zBXllTi;d9LD92qnA7Rl{n0=u9jr!Y+Mamx`08Ol#iR%ppJ$g0)VLp4JY-F6s@ zbQy5bwwUb($^-MSlN|Bz%_D%t+pNRZ)81zn6VvfEJiwL12L;BW6m{j$%myH1C`Wn) zCA8IkBz?>U{iLL^b~c+mmRCZh$)Sb+m3)i|M?MP_MN4>*z(JS&-))& zv#jqnqHER4$%Nk!gS{S+Myz*@S->L|^e6X(irwfIvkY9~I)_IWMjw_h9jJ8BE++5E zfR&Zey;Vp~jiRl|QE99v<=~KByW^k0_aV$*9N-CL^EwA2P+sB@rM>6W#y;623A#t4 z#Il*YAsNwS|JgM_%s{{}6u(H7cm4Mjhae9Jd)LS~BU?SMkIkMMLKmMCGVVdbB zK>-DhL7#;fIvQ$;nhMTxpv%b7bzv$PSj)6=D#uNn?uf{LHzLOAW20~v2sUNLu@ZSW zNPqSH49F2YZJN0JSvv4J*mw*id|{E=o^GDK+3-fZ10z2Nu5u18EtopcX5SVy*`P)) z>D`8H(ZZOHWxons0`P+M_Aa%`A82ko*mfaW5# ziZlVMi{)Y9?5-_T_X@VgX}nM7S;eog{%M)hxS8zo(;}yF8qmyh8vBr4ew^i;vt2@d z!Jn0>wU8g*((#Q{o-E1>ShA->U2umv&#aA0u|J$&G^PfI2XmL}ABjoVI?_zH?NSd`ciFbY4yI?M$$vnHoY!?R?m`B zdcGz>HIt8C=2h=Y=yu1|O;I6xkgVgh_qI%&lcVMrkU(|hU|8;Q@%d03an*lK_AOHMJ%eph)s4)13eItBp!(wiXT+B8bKAZwBIU}EgY<%*CxAZZ)N7hiFGM$-v-aIn|c{_93r*U zF6*b5+(t7I9i6D3hZdmBD7-^=%o$_!bd&X!x@k>K~{dBuhx-|x5S0^^5Qs;9|Zb{+bA zhmHMBuTZzxRsCM5{9$(_hZFkj*BmUBDF8=iH!fh}`icqa?jJd*jEV-v>Ac%{69ymm z;luf0P>^;{g&CK0NW@6Faa`~|2i;RHU1~t64^iT`ZVJK_UvhyTQVynz5>6jqzgWt; zQF~)UBVIi2Nj#{mwI5RVL&*`;r5s7LCYy#x94MeEJ_jrk|Gu)HU35_9k&LxC!{PBF zbErTg$6Em#d(n<9HKz8Awp7~kgMP%sSRs>$f~DN6$9y>P+E#-MSys?0B#peYO>A#s zCzM=7&)59_pzJM!;tHCu(G`}(-CcsaJ6S9^0fM^+2oPL?WN~*3zPJTRa0%`fLU0QZ z+?@a+`8MzS{1|$tFa~E4w6mD$!6p2#z? z(p{W_*@IJS*3*BIW>=*1cDrZlH?=C3QS!`zTa)D@mI#RW$AaTwt#Aw4$^kvc< z9!Bsv(}}jI#_xV!Fz8@hditqp@Rt`z*T+gJk(}F{+&wNm!LvC7r)+67F+I{lJ7q zWH8}^LG$+#YfZ?S%y5#%?v$8xkI%$K%Iu#sYsTxgSBY)Rt!-b!Z2cG$@LgG`&en5J z!>q}!4_=DC7|3z`NGWAk!7#Z9F>bkdj7C*GD^n{P{2r8;8z_0?kkZfv5eM_hHY83~ zDR8h|l@i;1`Qe>&sWdXA(_YRtAssP+CvRi?_4{ts`)D}qPYSlNUEmE6g(?uR^7e#C zu3v32GqyGEKn=SCr)NAoL!&}RSI8?X`@NyY3%WpGTFU56pNj7(nb^Sm+^_drWj3x1 zJLfisfw#cEER`;RSX%Dz;Bw}xSHc}8hd=F}C)o`yuMOgOsNuStkz^qHaaXJI$%rro z+$kO7@%r0gA=tf&Tn(yD$|2K^FQf>WRbuZy30TE!>KSH{Bf9e!PyoPkbeI`Q-3rPE z;0H5+9290o2nPq`0N_k0Cs|5vKX*fftPtaiB+w|@H`{{pPPC7Z;HTi_t=`=jrU0js z?_O?ri1(iq%5gmD;SX>OPijN}mf-RI{^H;&Y=$hjoN{M@TN<0Q+nevU)AM-iJJ!`3 zQjg3DT-O}8hn^$S1k(WVpr8{g7f#3LN$--Exe9Mfy$LISR<7M*i+c0p3VHL17tNVLD)1Mf^wsI9tT#G@A`~8w@w=ztv@%i}o+Y z`U@F&b0p&#=^qp-KY$@d7RS6iXWe2e_`WbT1=t7iHNfz4iJ*M#HZ%=mgkep+X?Zz) z%11*4FM+_YK1L+W?6XHD`Ari|CmMC02At-u4V@5{l(06}NKZ-^CF!poEPKBB_uZ_# zT!D5f$~=GT)M;&oBZGHLXp`aJ5%FI7T$rN8SoX{43A46@N5{!5aE%})yUch-yTEH4 zYc_lBGp?7%kKDzql}g}mOD(h0>dfB_kCF-GJ^gLmfc%c8U@aUv)b!(I$gdq$1Du%F zTtn1kz-iI@VOllUi}$+>M9@|_5)*`9VhBC1uju6X-F4)-sf!`$wiewD)CIXJs%Ody z9z^WZ82Q*+U}ONlPbXf?qTbb+SM3iZ&CDE&b8x<9N4;wu!yv=LD;z6kS^#!&wfQDQ z;`%1OYuw)Y##qKg`jUeWN$ZJr7#$SQQd8xoDYh~~o^MF}Jta1>=|hHzV^?hcVum?a z+bk8i)F-ZPBlo9)XE}G*l(K4P=ro_NAnhw1QHrQp>k5*#BiGzpz4B!~_+Rg0>;FP>vcjQv^wSrX1!lc(Ubdq;Xsp=LWBVLaAjVL8C>~9`S}+slwlUEzXwFaZi-M)M?g>fwCN$+e z!z;46W8E?s?M$dtJ<$t=8H|kxT9M3iW)ciH26HCp2tVrsunOgzjBK4NwjP^uwda=} zjToICv8^UiZX5O&<`1cJ*U(dQlu7~`Iup8#GqW9f;;-OF%&^+#z??I@@(tsYX=^+@ zBFLv4)l`gYdS?bYWjolFlt^U>W9Ei?j?NLpTt@J3zw0P4%Ez?Fp9rFGGJfz+m){hm z9T{G7LdOI&M04^_G&dyig;{;FQQ|n5FbRNKv{;wU}1U1IoP-&E>2x6B8i22Hu1?wzcrtx zF7#_>Q&fe=G$zROKq=(Q|Bzf4O~X0EX%on=~Ia;^)xf%ZB*z`_ZU$osT=~? zfxlyMnpAE$0`bUDqU@xKEBc(jACvJUCb3Vhkb|rzH|va)^XY_eaAbhEAx^n!MbT# zM(1~*9k2j*wcFr$O)M=8)($XNaDIJbC0D!pg2IZh&~Sr?H(gxsQ-|#-eGw-7g|}53 z9&NbpL9IIGh~{i3P?Qx52IX}Mot3dW_kq3X&HIovf0AKn)@1mY{|lYkdcNJ>XW@Mx zEs*uG01xjD9Q4V!UQh9AjP*EN2}{OLYegy!IRhTM$>`p;e?hMB z&?~0%GRxH=uiGqN_1^c?SDvq>h>H++_5&WCvlh2i6KC2J`Z9J+!6P8+j8 zw%g$6C-=M=o5HSRs<*qm^)094Cs@aXbC-8ok64$LJDEQ>sebI7{+z&&dQS&f{YES) zYUx4?GcqO^IFY>6R`6;2`k5lExiRRIj)GIh9DQ-bk8gC?uVYIWTSb9pIDxIg_0LF* zIUj2$H_<*n(^F_cevuuX1)*vmnK^pBIl?0q zd_EFMldpZ!_I2|_67T*I%axGCE~YgnE#KmQ#O@g+aaa{eG<#hWgjUyp86csDQP*(# zoK4b)gpLIP>A^hl{MXvRek*>IkluIXB%CZ&*=}8W{-0`hwS*owT?bN%$C4{@7Oj@v z^qQZ1+8);(9>b;kGWBmbUh`bg@C8E=HX{Gh6$+$umoV1Osdld-qzJp%zN3#T0{@8n z|A>$hB(W?xWYaT8dDE-;pGDX=vFOUuT;ugLccw>RHue=T2d+LRsYBlS`0>5;>C(tC`9p6tZ zwkRmK{T*db3%UZOea>#q!RVNYYcgfvSIeKpc0JTtS4jJj5eg+kIWNwD4_J!3?bW@& z76i%1kv{|=*7Fgi#UM>gDE#e|ZCJT3;QvD&W*G)}&;OZNU%k4870ochMVj9(R0 z3eK1y0Rl~-Bx(yb7a(P<7-0S^$7kD%TXST8Cqtpxy}h9~iB&oyC@Yq!8+r0PVn)%{9lfw^wjhBSz75U82U$=sWj{5HY*-kx24xizh zw}SW%pW4f#l}hHM)a4IrP8}Fhyu4l#Ca+ifXGeuutbLa+!8^)lW;igo6BO%dDMx1( zmOyf{H~!-+|HtW4^XM6c;=Iv0+C>sk@%Uxe_f?Fx}u(XxM;Xd5tjRO_v% z$J!lxYVkUN6(sjgtTM4|Y`Y>};%${$f{Nu5LO_fi;vPDsQ9<;8EuLDeT`#(?mhfV8 z2iZVj>yDBq@QpQX^gfaXC7q?nmU+0DOOS=l~qVP`A(QIgcp1QM+R@>A70e)G@Un#5ASIQ=-#@e;vNmLLD& z9edde1Qm?;#;HUcIyj3qfyw*otA_Jjs+A+kCFDcp9$nc~%zx4<4;i$9Sp|L}(8#Pp zO7pS9s!|10rovthUUX%wO#uNvpI17T58NA|HJH%j3YS$o0U}ip#xmjR!+~gp_$bU& zQLQswtXVy&N^V@fltU^VE}yu8=vOyRQ3tGjk##9x!MTQBkS@sBOSrSc45#fSc1{&{ zp0q?Yd)4cHP{!!Qo#HI*qSpR+kv~cwME+|8tX%joA3K=h;Kdq-g*M|FA_uDGSVF1R z5xk;ATB|XK*btskKq?_UFWTRHsX~|Si1);gqV1wM|A^bq1a0j+0^G74!+LEhMtE6WDn`MJ{_hiX4Q~U+j&oLCW{)2aS5E|Wj{RRV zB!4WDe+|8?;2PNVRMKYk7rYwtbWycPTNm?$>q^Zgef|*s{be@C?TPy+z0F;WiITU^ z=z-0Fj0?M}Ox0q`u^jPZ#^#8huo>~=Pu)+?|KHiGPX((%Gc%S|56azvbuZs?iPv|B z>f+#W_iR#JhUXkmLVw}t$+WZ!80`F7LAFfGonh&T)jpnCq@Nt$p;lWE^^kw;a{~)t z?*M-EvQy=p1JAT3X+QQA5_OnhbS>hRxW=y$V4N?imn0>vd1Ejb%4#i+rs$zm2?|6_ zXV}r=V|`a>V+d%L!{gu3;|-#5chE{Jhwd{acYnh|J3N)v9;%4A@K!Y_xHopyCE%rl z)jPl5UuR?}whlbu&K}MbL8TLoHVeI>Ep?xZ#EjAy{qX(%eJ9_5K78HDQpgH&l6oZNi49M*rpZ-eCB+%@u z3ua|zn0s^3QP=;?toRR1$8BD@QXOb(hS)wcJ0Z!Zs*pvP(ZwQsD1rLA?mTk&9`@Uq z0M`mUo0a3$#E>9!{(VyhiWqRM;?lWghd)q>IVdPz6d=#pl;Zyyg;>=V5Wx^-Pz9+% znQoMa@vZ`_fc5hnDe=C#M<$~NhbdCnx*AHE4zB_>gt!*m7Wyu;Gbr&UU^sG=F#ACYEWFL9>bN zEs#^RxXP5>%}ERU;z z3*WGRIMT>4<8MPp^Iu#X0Y_0WTpo)d93eFu<+)ADyuY?Du@nI zMqrC3zdxkgpgS!H6*(y`3iPgY-D*DY8IY5CjeEk_rv2CR< zQQMy3Cp|MST<_Xvd6LfAbZw)IGAD6vn!r6{h9aytKvTuHRWO_sJ@bwJ?F$U{(Ne+P) z3<%WAV?zKYYjhM#R6Q^?VZD$}MJ-rwS1t&{yNyV*p7a@nXd*qE4PoK3rv`+eh<-^2 zVeA%tCDP=rk|~3SXfg9ch~gfSkwUWLoDlNB@S3ft9c@^zy($*s#e7%dvN+Z2>5K9B z`QdTX?9z$sZQRwKiXU7{IO54|YB?2BK5tff_hQzsZt7YSnB;IBJVDJ`ZBje{`sSyK zE;Tj1W`U0-R2Htk!Rwz&f*8W39qI7sT1zw>)Ju2}Ypq*aD`}QLp}_&c6GXX51hJnO z>SKyfhamFVr>D-H*b4SbBPCqp!cO~(jxx5tBNlzex|Q1u&stk3>`}ci09EB~I80cN zY+K`&+GD6=?aeu$X_Ym=+pWo^h=gUo?OM1qu`|3zXAF~e`k%OD_1>yo?#>r_tEv7U(kh721lFaT$-4(ZSBnFJb;%p^QW6dt zQYMlSD@9?Ap#dBaJ3%+_zkzVs7Ii4t(ZYQfknhL0`+A;o0sBnV^7$aTJdXw@+JN^MWA$xmQlVqP&~g;M!E?Yp zW)E7^TB!vLGKe^GaZ{26S=7jc(UDBMb#B6weI(ai9Z;!}L8c>ur19!>7)i;5a(GD5 zpG}bMpcJyVA5>SZL0VF{=~sRD6)5N9ui*3^IhBN>+4o@j)@ZdaD8RMQH*JtAN0Hcw zsi#PvjKA_rU9Z>OmOP)7a;iredW6lEX>p}gCG4j*k)u6>!c)4%&3ZiHr6zPz6XS|-m-MR+ z6Q%8sZGm@=Jw#)Hxs#^}gU^ZYtGGC#Bo5%xBAO#GW6o1`Avzw(pAhs{5B6=vXAg>< z(9r#Z#>c*`!6Fa_`6{OM57eZZ;bx$knA?d5(EgEXeRFva`fGX5&+~`$^PUCiuhzeA z?}1&nel#sjf{S}I_|IJg4#81NvfEK-RqGZn+y{Kpy`B?_ZFRVhP01(xs^x!tO|SS{ zvk8FK2u9P$4gYQ|q&bRz_D?xwQS3CFqf-o6s9f3<-?}k7;frQ*`&2dSq*RD)?^pTQ zDO(`%5?nF;W32&-?|Lj_Z@#@8iX2Snk<45Z6!*Ld`sVO|1r9Z}^J5tlD*yVBf&UiH z0p|YyuKL{%rvEL-CLmtpa`%2WK{AQ-H9$Eg4lj>o$eebTL%mGBYNZS^1H4XpF|>yo zpl`~^V)e9{5VOm;n%5Ftw}^nY&(P=aUkQiHp?l!&+YRIsKrC`N3sP;o!OeI6``=+j zhM4=~0f%Yi?Ocz0`ZQqjFdq;+IhRx(yfp^}^j6((jwf{y+f zH0ikA89FNj&f`;m6D2}Es#XVBuVBLOJzMqtJ0*bAf|V!c$6NT^ScdOt4~mZ3OgLTz zdbuvayTlFpuIFS}QA3^w&0c*D^;`)-vDS&x{}HNoCDPXc#~G|&`J>6CB4+kZGPpLa z!^?^-p*XDroCY3Qnv1qlP-&Cs=>+5@rU(ocr@8weO{AlV>_k`EW7Hr%f}U|_BK=p$ zVkIH$7_2S0S4@xT?+Vm!J5q^f_cPn61EVVAKu7b&8^u2u0!Z2Oe*48;tgpZiMMDKutyNhdMoz0Wfo7P$5 zu|A4u&TTr`_%+qyyk;D)t_y+E zA0~s?Dv7T3A{!KOQmgxy2%+<(J59kJqPlw|Xu$RU%6DI=5Y#ZLCXI|t$jGI8@L^{t zCr=0a=g#&+mWB^`IOXfrG8y{%Pc|9aez>n+J=u`-48y3Wk`F4710c|RvXMrr7h<{D zK81;UE>9vxK{YBjsfI9TvOr|uelOAt}gE;p~;4H=ORBjUMB z1oIEbze&D*bDq$6nR{^<_p**l+O%0bYR^OMH*y0x7j_Yq{aN*$7hmSC%4KN_znMmv z7vlCz#HSVAf~ru(fvXIKWkzDPdgb74Dfd-B9j9n1vp%azLXe^scn4(J39uxVIiMcn z@GAY>hBCQ;c|}ZV;FZnvfx$0DuCyQG8GgwVO5*|$;5jyHKD%#Y*MPJS=(3 z+?fN_PcVWJZ&jGh@tAUbF2DbqUahQiQfn3vnqSj#Q(U)!&mJD&n)E>uL!m$}k&&?b zdQp3}7#gD=Nh3>lq%PT$Nh7=80l%w&N{t0f%bEDxf@!bu^sDR~-Ox#`jb@rmoa z1NnA2s!@kFY;F5KAieDNR}5J>mxufgrC&NnORcbGEbgdxxh6?hVzS&Do%iS-*x7IB z{YWloV)#HV3+wVDS8Xqy{r8bLC|dL+440~iEM|(+Chlg^O8mm6h~+nvR%oOj zsQp9=8xxnKS^E9_F3_3W4JLfzwh1x5TT;nJqfj(N=ek?(_c}YJLFi;9;beT@KshIq1258|J>Od(l(%qe&H5WctX(n3OzUY(hhy zdl;M_oTiA%FWR-+=?5m^2H^S7$aQkEc zXRiw-cPXWT301sZdG)0UYi%Y7d;?(6r3pR-93>nIbi=ngt^4SPZcTN~MHJLRrIT7w z`smpb&&<4{S{V^mNtKz@-O!$Wrfo@o@UkJ{D6W2E19Qq=t^I5DXXfVLrm~gRdyDdf zl7C0*O1xq4qpS9wm%lXBJNX#Bz4P&32Oh`S3Z?wnsyv~ic5!JyG0uw^XZ@3>D590x zWpe_yX49rfrj+VMK(y5gw`TX5648oqbqK+<;b|au$j9j1?cH&%X+d6ex)UL-535f8 zMZA7<$*o@bnK8FQ$%WrEDediG$qdj~!U+e_>>v#sC#37CmJK$siVulUcs-+ zw#lO`sZFVjsV|w|w4l+3exzp03g9O}6z?MEnh_Rja}8XTmS zO6f(GIp|}_ZwuNky2;bBYm0(3n&bYvwn9G)+*`}MUP!Lu;2(>EMcU(jmE?PvUNLeZ zzJ2`o=v!*`@(glYC%;sF=sG~GbI;uWCR?%zX&>ge>Mn0&uMH{ej zO(|cOth?&=3Q313_mghgRi|UE{ z3gFt-E`&|#W+>7iLnjU(k3sq!IT}}f_w!pb#md`BVRCw&9d+Kz3{SHOx}<*4Ac?bnk!!8RLVtUwmY?exqag7ll^`-Mmjv7xRNm z`uV@Xs{A5ot^(0j5lEx#LR!OkEUUNxhRCKQo*t$EbYoqh=6^e&oV&9KPCEc#gqPgG z+Lpe=fTS8_plU-7DVxuz?_h5Cx4Ppdr%A%U$e4bT-yDL$ymWQ{|5E$*S}N2{(e69C9GdCz^m?r49k2iR{AhY zDXZOGK`Ms*6>VJwl;8I7H}MT?RY3VI75u$h`E6Xqu>6ih(`$Jt1NK+N{FtkiQqr1v zKFF*GWOL9__syp<387N5= zU_k;2J$F?O&bKfGjxYgSRUbj=J}Uw7?eEC5)2O&B9nh8jD6nt`^U@`f%Omjrxl~)= zW%?qOZSa;(r0R8*<1_9h^Ql1WOD~oWU#fPpM_NxlZ}z&e&_N)0!%6|DJHBxSI4mmZ z9>9fJT*4VKzqXTh!VK0(<}WyaCOw8m$hTf+?h{K!t2Cuh*$1u+qugXga=nqpb#@$H z8w`d3RB(hqOjoizuhTJ!C?!Ay!jrkJyZ_FUW|RX(bXMt-9gC@s0$Co|?<~E3_8XEb zhVwe56GINSlF^U2jOLBvCA*pc+L?P1q}gDMh8J^66K(n=zpX@9DRFtF>-4dwrFW_~ z4~=t2{F2A$Z6Tuopxd3!r*gy~lcI3dR6dyv42n_j_>jm5@LF^0^PSDZ6CIR1)IiHk zqw!)v(XdWzCj_x{DXyUhzuJlC+}wVskf3)J5BkR!{QMu^B`uPVn;;6wxA0Sb%>#bq zR&=V}b0eyCC$y1`ikU>Y0I9mdasRZen`|yv1=HPqN7bNjVojinVE2&H&}sIFKs|Qw zF%jfUv4JKa8KMe{?*|?S6-l(rSWRyke3Pr$ipfbFy6*8_ht2H@vL3vDVF3AjPZCs*8;~M=Otyf(E<<|J9lF6r zBcHgJT~>ZeH{_3auk6yoRz)K>5o0FmHXY7L*LzacHEe8QM54#@%!QYL<*1c@l4&tS zyeP^T(B^#sU!4bx(hX@Ij`|~=dTiu8fSgw7Ueuv#$28)%0CkY52qBvSvKN3|!KlHc zsJd}0H!(|@ZDx1o4nT*DraF|5T9%(;t`OB#Z(k4uH*WNIm_j>xAH#B1J z*|*ot1OEZ-rvAj;?ap4qhcNH3s$}|^wmm$&rR-aKRxcRIXAzeBvQ*EI#@P|}B73CU zC|BLYy#Y@F*=BeK)rPK@UMZ>qs9q-!CB{D6U)mKs#^M2Y1t!a?`j?iY(;!S?aX#_- zW(U#X|5K<3Q?g=|1kdae7|w}fm<0UX1gN<6zdAl6Ik9VJ1dReu`Tl_=_hDhuJYN-+ zpE&O@;9sF;$rnp095&K9zJn=C-t;3A2qlt0JIxZjjO9|6foksq^x%)C?_|T?WUgQR z3uQTJPnzeOz7l);9Ek``O8*NycszLT(sZQzxEi`p`?Q+7K+x>NwKR3RTzi~0M;d5b z{!tH`UBb4BUyIV*=iTh z{Q&%BNO?zt5$B={FjD~3^J{?}RE-;s2}GAu^u$JgLWb!BO)N)&;(Sd|-^8kc+1;J= z4@NwhYZ1HPZ{HT}RTs0`P7}%92zx&xF${g8Syg^DH%5zc&`>cD<&((=oESUWYh%Jm zJIh~NG|!u3DXRdry|Kv=6+jG`fx=)I+>_XR4mLi}ci5Iulr`tUT>5)`n)D(#> z{G#scU}V#fN4`?73^*uYI!BEGy*3oITV?$VjKhR6(Xu$e@>*PKr7+^OH?DXZZDZ$j zROdW_$#&Z`7UmA1GQ0tGDsCcob=wie-S1cpBMj@J{ouMg?V~Ds{YE%BbkJ@^tkVf? z5a=L>JTQ>bZUfO`NsE)3SY=&FWI#JNp#4PlBv8cz7xr8mXcb?j{7{D2VkeZ!4vDD_ zx~|w`ovNL$H__7}o<2qMi<|(7l8KYms;bP}aU_amnq~?*UMvTr%fl$1N3SN&=)mioo z$y+oP{+f9;F5#v;bNyj}Y0T?A5?z0F~Gz= z?hp2O{RKcb>^j6zw+_>G>9;j8p?{UOf*0%#5GxQcy;!bxr)1#eq1*M?<><4l4bAIIP+>DQb1OR$E9E0Z(0a% zcvCKO2*m~c!k|dR$fQ9cUj^oIJoR_wX{5+SMwFXL*UWhMycjJ3aDJV}(84%q zeQpky<*0>lvTZa{k(Z9p@B%(z(u*$tM1(AFDjSyQ9b*?7p!aNuuc;ZNxbnn zY}^6pVFa|3>6M7&1~TMnf-1Wj*E6O6hmTBesU`MDzT}|8o7grSvKK@iy999{C++Xv z14m?1cv4oHJnHrz`g-!G?_*D-Ug`=a{(#ZJ^~2x)9`qjQfBp@|44alr&$EMc1y-nP z^;D`D!thH>b7Ql>u`7|Bbf^du7$@oP@p7w@d9UW@J>t(SWGB8B)3Mnow_W>*fj$Lf zNXV{Fx=PbV!8g`Am>A(b_yJxb7l50F6YvY}uzRLi)a}YaslmpBRRtN5(*wvrufvyt z;6WCT%E8|WOr-2Xbp9lSOC$i9sJO}m8Ex0{1FMir8aYI;AMlfYZugrh=-yfORquUA zJGR{BZ&TB1bFugOEtVCz-PM$kS)B#)fj+#f1atPivqL+S^eZ2)*sw7qbEWLgZ&R@A zpIWHS9yL;o-XM}#C-d{S=@h`Sm(tyiigfzHycr=kZa;WeQvcE6I}I!68;TAn z#`t0O;kyR6%&=Fwi%QEcV3u}^itgaY5B&A}@Xudlo@fPxXdbbhw0e3-h|Ggcv>F2x zd=)IOi64ju7w)nR`pB*F9<4?-{g|eP+vjh`3u&>=bi)s>$tpE~DraN{w=^yt8obrE zZ?d~ZgIA}z>4wh)8A6Y*DidXx9s~BRHAkgsAINk*H%CgNf~Jwqi@G2d=8uU$*0wfn z%|tP+k1DialtcaQDxclhxsk)Xdn+%|b&ld2-P<5!=eO@ss|^{X#vlVcV=n7gy4r7+ zutS==Fa;V>%ui5dDB)Fl>jR%DQJnKA#5J(?sEw9tAr$w8B>5!JIi5$da5E?6!1_dT z@_{gZ#!&XK0Ez5P{-{R(LBTi)xwa5{z5FGt_rU4t1azUo?fOsY6l8E3N-Be|1QjA- zd98*Upm#&lBtv-+z!qWulj?(}(aYf66{=_j!)uv%zqgO1Nvi|He$A!ymbJZ8uPp$m zV|f#5SrowQ(94}bQEOF62}1TPb~|<1L-aY;d8T&lzG77DP=&qC8W|dO^Qq9)9xNP9 z`rHeYA~1X|<{oQzN417?(2!eA;EW|!H;@i1yrA{OQPnXlmt(csmJA2uP**8x85{S( zMMr)IpZM38xVWAX$!~<&rlciw*K3>7k@)QqpgF}yN~ZvSdsc*z)eDO zfmdLxkBz-fy@*>Nr-~Te6>Xv=AKJF*P zSLzi0WyE(`*e@iBzE44hGrf@^dd$eJM8AS9aQ$PeIJOn57af7qe*x)+A<8Vz1X*x%vgJ9RceU0@Q)s;;Wa9eU2m;mreHxFp`_XC?N zo2Kc8qJ}HwXMD>D)L$Bs3Ez>gD*SD*FYWNMScos9h2lo1^Y9cieo2Bq;Rpq zL2gS32)=|&NGb)TWksW$w0bb&OH-}%OoWD&tik)V9~G8_c^mQ;g?Yat4Df}oijgJ4 za%3V*mC+Y=`TAeJtZ-_w7LFp7 zg7lS+$*#`Tb!YFkaQ^1w;|65i1wE4PI6%n#b|umH%5H@ouyy2A3xwq1x2MZ0gf&{Ti%BLxI z*I%dE6NX(b3j~(S_Llf==ycqEQ{ArOZ9syVEO8c1Qf1|bxMAix6ZzA~07d;mO+Gm} z@CnE)Ty~HXPd!lv{t8L@F7Kht3|C$ujXZ_Twg0mFdA2bV9^=3rLwF&<%NGF{8?X4F zQXISuNPFBw8dWPikzPS6q!aF9ZG!<~<^3PNY$3slj{kra%Hk0rx%1ZcQ_-*pRZ*{z z^K>QQzL#^b&d#HB?tSa?iFol!6W@Z+tvMl0T)O3FR(fOW~Uv_E?j@@!{!S zq_+lE3fp|!2I!Wm8zUh%9!n1_yKo1QN7AE7dcW#1_SckD7r?V#6tG|WddgF5 z+I6ORLmhK^*?5O>sLHWao+?idL%_Q1zFC0mfO((oz8%WHit=aN^(Nc> z2&fKPJnXl-)xiUqCVe9$YUN)D53%e@=J!gW@f{Br=_KTq7X-*HF9;1Ekgl_SwrGO{ zQ%QQr-CnR{V;pbs-9?W6U~yJ9j4cJBKkW(82kR4f1~SR$=b!}EIZIJ$t~;`iw8NVe z`2w4_O_Cl-*+()pIhy(UlJ;TKJAOwYKsWHE@W^g|25&8JO0}*jYM79_xG0@8{zS z0KIy3JVzj4DPY28>CVepbEWleL!PtRgQb-=Rp*oHKE8to0JSpa>(DiIPB=iUBRWznX#*zT${o$|VV0GS<_k@q z4LlzKbT=ZG5c2-Xb{_Qwzrh?Y^Y%)t4#PVI-On@@qOdN*yMG#e+EG@0wIeV`&&w0) z-mBHoqHkPF@99ycN`~B8&fWlJfVsfR`z@N z^r3F2L8p`zEbw57A*)T%*A*QahTwPrjT0u-J2XhAF|q3hU#ECU$sl&wYvs~Z=g08zZZi6X&} zB_N5|&rf09fWzorYH}6Alm>Q$J=^sTgR8-2#NX4oFkc|Ze+5$Ch^jN!T&x%&@LHzH z`@(ah(={sY6uo+5(Q(!Jo$^L&*P$;noSw`8Ywp`m$WxM-t7zfMCbM&Fv~fkIpFpPn z95LgS9XBm}Yfo^uQ-99y1GJbHZr#^%A{A<6V?$L=TYz*@Djt%wR;{$us=Ko~_hF<+U(82{d46R_SI3%p1xEZ115xpL z_n*(oyu6mB;l^2Mw~MV+TopgvX;loyI5&cdrEQ*k3hF%r_>W@kLUf|5Wx4d(1BgF|4-e`6&p5~of~X_^(G~~l2ugkZ>YW4ywn7ODJ$xJjV|Kc3 zVtm|5TKGXUeL)6$b3$KRq;M51zB*&e4vwAsO0LE`uPur3Zi|tnOml!IBP7Uass?sx zwxf;o_IM;+T;|w2Fs8Fd1l+7a@&1zYTL8hR#I&Pm1D0)gbABzTN9>fpx! zCpgqc7E`@5Y~j*zlZphXyU9KQvina%P;yPeqG8N%uL8d;dX_;f%Eho{_%x@4J^3S; z{%iF2G75Bu~s&9sYg1LgjJu-9cfxUN7TTUGxw0LJUc0}Z=WZr0Xmp$ z1Q*qx3G_QjP%=koI*pOde7>;$5Io7$FYRPO&tiw&hf9nqnALzaU=q0GoiC!Dr(3&>jDVK6Cj6X7Pp>H~OfI7R1^8{T>Lz8J_;P++Cu)B`>>T( zG9xLIgvV{W6YpWSL|I&xKT?+DZ(n3Nzy6y}PvqZ;<*=k^_aXR;V?^L0E;N^wGAC)z zrJ>@ue@g;b;39Wj()<+L#ci|s><9P!yWqa{Wu4k-^E10qSGW@3(X6n61LG;sH3F3% zc>D)z6XR(nEKCl7%K|7mS*+0CmkWxrmq6`lD-KEOa9DEI-{0eYCInLQ0MELIcOfmb zM&*Ce0&v%xV&;FoB$lC$Rj!`)j4#Swh}qKmr)cMrh{ z?hAzA5@ZPy+&vK77I)X+1b3I?p)p0l*qkle7I(x?%Q+Foy|k(jn`zFoy}3 zjOxsn7?;1E7{9QYOsVN=D-u@R$(-Ao2hcC z65)(=6S@R!!m6s+(MEh&g&5(T`3@LfyU%c&oZ@gTDwLE;;VOXg*&v@}1?yDKk5yFL z&Y+4gn64P6(^y(01(&46E?m!Pb9koUx1;(z**0^eVVlS*Fm+Rsiv^^sg)_#n!;!O+!Chnr`(H zPT}h+3&rnMwi<_FR*1{VkF>f2{6&7@77fZ})cIoee_^W%R(5HOmAR2^1K3Fp2il>h z4W^t3I@Ehoab5_IS;V@axxJ1FcQfBH3}4T`MT7KOyP{S0a`Rtsmq_22^%&8KX6xbM zuAlb%3-}sJ=33~mf|>xrODcK$=&z`?HH31-s&qE5yRLhz^$nci6oqQH5R-wl6-I=t9{oUy?v0 zh72dE_8H^3a9WNG&G+wCB*9}DE3>ZrK0RzBG9@E%CMCEF=|6_hXueO*!ZvQLE`l&a zb0>bipYT0)bWxZMCv0Yz-?Z6Cr_d#f(Ns96}FP;tHFPf2icRr zUx7frk?>zkK>COXFe>kfVfTcFSTH==Gi-^-7k+i2)o2OACf? zj<+oJG#aMj3Jl+JXTIX>(|GjRs=pJ-i)NJj`?H0*`TX7Fe9Umi@Q|5~C6`W#qSqpv zortY(*RYp0)nxv#hj7O^GZTUU)0KQgIs?tD8q=XYms&_}G&_Eyp1lr#7bhw4fnY@n zSdK;*))?W>kPa8(r>Vge4}135ID~Fg%VGgOuhRSqSJ z;^IegszqXgI|hUv%Z`%?9ug}mwMxn?xx-VaxwNyo)Su^*d&BTSIAB+DCyn7eq)C4X ze`%0e6)PI07C(SrB58d(5uNatx;C<%Q7>XfpXreDhgNEouh<{_^DdAWP^>bi#)fG* zzmK0eV-y||Th^cxP@ElMw`401w?X9y%%%wsD4LaR4{KizuGz8`V$iH-QW&xNA~!^=dNc-y+`6{C-&D%@Uv_uqc$ zMzDV0p88fg*`#U`$Q#Y9uoDwLcoTgE%;sZO0-RTi>^kB zak|A9>1>BAYed-@w4rpF&(hgbS=P}3aOg1`p93C!WxwH3Sb#$Q;;o;o5W^NLq)Zv} z$3AiJ2GSpn>`3);{HuJR-yboD+xKsTnHhZuz!av@PsLTH91nYO)&)%@98TSa-}z>N zPHbVLNrsVO#B87n3;y;dbP;TrK#k2q$b+2#k&>GoHt0Uhe>#~bG-95YtLy&s2BY*9 zKYR}SrsLMf(8D`5RG~}k^^-HKPPyL1SO3&wQg)w-rhL<#%Nzl2ZVZ69dn@wO-v|$( z$z<7-gkaI*lS#m?7*>d1gxc6ikV}&%2NCvs_|OxQ*=g-JfVqWPIqbexyXz@duUM4; zUH24kvH{F+>{#}6Gi$tzG~gDHrQ-})NHLV}?u+Oeu)?XjHB*V&PA?Qg>`({&2JiYw zhun(GzM*WqF!HUETMm+=WLT{K%}XSnCtID0JDm7GBl&kYA^N{FxEHbVJ4q)lfW0GX zJ>jLl8!4RZ>F{50%josqU9+Mwl&}*SeH3eOCHU+>v6!B(nZe|GM{?irQSS@(}af zBu^`v&enF*$Ef>bf>o6d(^`gz!tpGrKq1UE(xgD->$M!GcNzbbMg?Q5iXUa{r?_d_ zbX?n$*?v3kpPOcS8>t!NwG z$gkDP+h>3By5j`KqQb=uTJqWt($`R|h;gsKBdscrV{!5>wjIcCg}l}i5X|B!9k(`J9Qvl3f6S`6A-j)nPcrJT$U19Fl6E3^W+9suiZ(mfHUJ=+LA zD6cttsK5I7JI;UO2YDj8Q$7M(j^bhdVA}M*VW!;YPQXBz?IDRA8s2hEKI60#`V zmVdLGpuLYJP}Ftq)V83pj4`KnKC@G~Zo}4D^L?k zyeqX{uK*;s5Ou^=lYfLiREt9M6*!%uh9&Sm0;j^=UF5_Z2=g&|KU6MOzN6f?IoVpl zAh>}T3^kqk7>qLSYVwv-GnRpvcE8hhC!BNFExL{GPTzcHT(>yzXWh4`HjetMobDY~ z5PVj@Zy33*ejm2GUHxtg^$~CgDI3WlZ{a{YgpG>bMebh4`0}9L9}E_^8GCt%_ZLTo zl)mMM>*6%bAd6Rmt35&OyMVt(_(m-9rVInsBm)Kfu(bTzmVjp^(+Ew#3QWkHc4bF5 zxQZv>ZJYPWUjXj_4iL>KFNt9O%1935O#71AS?3B)7|zf_5KvQY=LwKl=a#x4bg4G% zNoAo{u@lkY@bhfBDKCdR@bU3ipTk-5(@Zvum8}vy`#!K(jn4QE;(&%m+8)7>dfc2u z(-2HIX(_Mx^YU}V8}|gJQ$`vx?}U_h;PC*kfq+zBprWT_|Be#=9H-2}e{E(G@}{Vf0R+ zWkPP2V<-bCK#6mlF*H6u9PBWjlX5QZM=?PPv!+ZrW1aRBg2ATX{D~SycBH7$A9!%q zy`L$5&Y|ofe71Wcd<{mPBYh*>OzCj`!UWi13AGz3h$7ly5tk71AFRR>n9n1GRbVUx zb#2`zR4cjS9wvWe>5)5*A#Q_)^4vRgh*0u&`ZLoeBb^E9YpWviKm9^$t7!4XjI6gM z{_K+q7-XCCn6Augs2}l;5g09})F}!00}vP;LMgwB&9pH8nBtHz`yi1J4D0Jw zkon!tq*{NeRb z+2Y@=gr`EU#gfAryT8WnzUuAA8U>^2g2x&#ra_kGTdp#yvQ@7-TefIz(ET?9&^&2o zBW7=z=ax?w<5{76*u1HaLz*(DCWbM&A#>{X@_(ZpuW&wn?Ht-_!>Ujj9lQG8fn$yI zIXnG*iN&7z7_w-Pvbhoc2UHqKekQbfrU_RbUT2MzvdnJ@rWH!7m@%J>`SvZWwnZx> z1>VuS>nXR9k_qkGOpQ(q7JY1R2$fNhK$Je?H<`?b9Z`S>SIx~hZ^q7oL!$|UHpjl< zM`;lj;ACqzmY4d`sFouk*OmU&6fmJ7nyrXT&~Dtvwn*33JOeR|^G^i@ETi7WYXN9# z;v2mt&e=Pj(R!o}9kI@IQ)0W;%Ga?5xi+fs4X8^CYFg?^;P8+;ng**f_K&IzWF&&& z96NcG`m~ID^k{tn2B%eJ4zsXh32)&9ML!=k6X$WK9i4Q!1Mmco)BY6a_<6OT*-N}9 zs6m;6Z+Xi3yPMJSv}OrvF<*O-;0wLt%37=N8h*hMBl*sLg>C(QWaEgUq<3Bs&YKD$u=>xB)I#z8KXrE5fJ|IPkzl?d&x zkqXc74$Qf2eBA$wk;;Gf2cWG@gzrXoq3g16z*v@BPYL*%@-k_b_e0U%3ZAXYG5>iN z`4CBZ9Vc==wd`_m6YH6(lR?OT%J-kWP1C3kN|_p{JLn_GWdI))oxYdw**TIftx_cC z13|0V>P7JB(ks^id>B;v4?=`N`Gcr~M09(Cdu4wiQn(k`5&w62?op2O_q+GC@b44Y zCEDWt`d@id?<-VhW6@f6#u=J=0vsb^y3CYk4ZeochePiX3i{RIqaViz?)pRq zY=d`Edz7Q@Y#)eS>JHykb3t~Uq|P+cNkgN9t*JvomfJE1XUYliM!O^dnW-sbc^vN2 z7~FUg7J>^|dzgobL-x^|&aQZ`Gi!9x?CD^JLP}=DpQ%z_XG=aiH}8)+FQOQU$9E!I zC@zc}@xKk27rLbr;lwRpA7TB2<1SeOXH2+Y&>C*@!?5iC-o5SYD(^11a3tM_q{oSunQ zx56_f{kAKX7M6TJKu&|6fk5j4Hu0X1g+3EoRex6%NfPX)9KdJ9{;Bl~X};by3WK9a zP?x?PorCecmT1FnF|Q4COH;Ck{tp@dwCguUaZCE2&o5VzP)2Vu7~Li+vWyZ-qXO{? z645Q@(9a?CXg(80Ly#UuHMHs1@KPyU0T#@F6WHE=)L^Le1Mpv?xLb8!*@tTBR+UJWi_#EQwd%@z1<~zK2E~2v zVs|YSk`aECzS>jgVXnjD()*Z-APG2rpe*mJ)+_owOh^&eliFjxB0&*tPN_+goAeWi zIYUme+*!2?FXezam?yl@u=p#S2l?&>Qy6Jha-9AROWBvV_3U$md2QSul1Q#i>$0BO z5Edw;{Rjgy%Qieq`egiV)8KF4+~N4NKGE>ccM^&0`(eM17zD^fYr|W_?IR!%UZ98a z(@})en$QheM&#>!R$Lj)PnA<%1;9PMcjH5Z=3r5cQKOQoTHBg~ZGs{eAf4nf6d`lXKsZ8W&5o(b@RO@CK{$wnZV~x`?ZA_0C2_)1 zZTOXc8yx&?)Ugffi)s4BXXDL0-WWVMj$cF_MTD&`13xsE%Z5Md@aZcYuUWUyeDU4K zil!y*;{JT9><*!tZ(+V);NVmp&ox}{gkIe2g{?ap`uRS+++MOlGr+)4~%_U)H z*Poy#B1Jp5*?a3t183J$8c!{^-uJ+ph8pn~AT;-;)bQnWoEiwd9IknRc{SS@1wR~H z8a`jF{{cc9H^7jsT=ADJ!|r=A?30G^Zb%%||09F}e7nWjr4HTLGkiI4hjl)JzAVBT zhpD??wxCydbzsPjYS-P-l%EC}Ggeasnd=(q03EaDtyV;|#&~SGmx6$MN-X(#QKS z9O&aZaKsvN-VK3Vok6d|paUow1JIjZYQPJP#+|Y1Y76xA40>P*y;c=0&4oZvzVIec zJ#^+m&xyMq_Y5KDy{dkYVZ*BKKu*YGjiE2(d~f~vrGgWB`9~ED8J<7)KYO0$?1CH- zgYS_>9$TOsK0Q#VyCLK$SKRM@9O(B9hN&ICC0RP_hM-Ho5JQO9BdK>e&oR0Kah_S9 z?H|vpAb<3BdRq>|9Gh^~52?HO#C?t)&X30ZuKoZw>|xU(EI;?M6A1a!d$wJ(u?{)t zhCZbk`rOCWyxi{zO;h{brNORp2Z{lG3WL6!bhGCE8XvM;SIG5c1>dsY$2~5#ELpA} z=K9+D+*VmW`!0+>w{SuqXT#Q^7ZvNhAJ4CLx54+1P{{pDF)9vJ3$ortcpwQQQ6CnY zb~!&I?v5J%AUM2xIU1;eUTqCFL&-S?gYFM1<^N>F^DT?ZWy;|Q)Bdwui?xCE&% z1n+5pZzx~drwyOuuu8U8O2qD-!J9$-d*`$dzbbr zhR?#g7iH_vUZC&Gc=t187I~ z#G|i#Bm8p&z3=8c*`hgTALIe7XBy>X^T)C4Dwv^r4qzva%i!I^Rn}_{zO43BUmV+TAKY{E)fDh#=(>zSgv7S`I{5|C^u@R^_-q~v;(WK#4 zny0p2iQi|(v_ECQPh`Jr`QTPnw+Vk51IU`5HaJwD`)0Uhesg}@+mbEC5O-wHJVW0{ za{NW8!?b!8sb7DEq83%Xv7a@JK$oMGw=)-rHuKv@qgv0=kLn#Aaa=EZ4edxPNben2w&n+W&!C{sA(!`Em4uE_moj$=)-76Ul~OwRqk$D zb+nNAQ%0L>!K{_|>!_u+aRP>=8aSRVM%>Z(BUh}#dg4{v!OQ1Gk~eQR<5CvqlJCkB zay#Z^EQ;!e<>f8Pib?XXY+nXY?LIpqh*0b1!XFBW3xRpy2*uv0RFLV-YYx~36KACR z|M`}$^klFLzBE}-m}+SH9n%s#6_{{T+F7XO)Q|sMLiO_w`gk*M==b+=vk^z4nGSnE zblp90`lSxOY6!)$Rpf~uK;Ffaj_ccGz96T1tT2S!%XUBihyyo@;%JRqh|~YVYJ6ol z?MiN2R99a_wpt#c`+9VtAb-SQv;b#q(>&YF9;?fkCI*??OvhixTfq;g8Fx-j)n*kL z57*+5OepHX4ZU#(KTbP>Z)T~X&+93tlJ&lv^-otL zIbTRcuMMVo##j#x{T?z6UvATYkONMzoUpo%Y~?q^ow6-voWt#P-l*=!n(q4(V2$f| zW^;?S9qwZ$#X8kvP}3(?k1G0N>uL1k7gaxCQ)ljD=Q{KS_E_}0*~ta^Vbwo4JwjT# zAwTX?KV7COdS7In`Mx~hfG?M+q1PWX(HmChqOV?J$HDa-Us5{@I6E1+Njm*i=RL19 z3&;e-V1ANP3lYdBA4ryFT{%Zm32VD*z4=9g$rO8 zv>{imwA5nlKCwtKknI*C;H#-)fzD%Q}m0_!}*`WorM(nz)Xq4jBOYCi>K1ql2WLE+@-fH179^H7eZn#4r z(EDGGP}t+D{wJdO6AD*I=v{J;syEvY%dHvUO@<+4|Eboys&x(y@v2g-1-GZR9#`dE zPL%Xw8->@gAO;`lqhUyj@3fMvqp;M3szT7-Ycs`{WrK4$(kZW5brl}z|YUH$=vjlei{0#=D=W|M@ico-5f8`fD+E@o2kOd zgx>3oo=;L8Dg6?tD)H-{0bZ4ziwmLfdjOk6 z5SBYUnw!xAfSrrq|EUKV`972|0F{dGQVR6>w;i zK8X2GtoJd_vzvD2iA*f@8T#4i~7H3rAF1osxiAs zkoQrqLQ$?PyDNCDMdKi=%&?Ic0hlRx&9PAxArX9~hEIGxC%wQh^{>#E@na*4H^D#X zwN~xgfBIs0*uq}NXN0>vlt#eHCLx`Br4fAeKyfQNz;kJY+-huw_Ei!rQ4E(=M%)mx zp&P8H;H#tiHka`gN1`{TZQb8w{VgA!CgSeH`6XH-c|7LC0J3fiwIG}}mf9Q&oD%|l z=N@|V0;aHaz@S9kbZk<10&v0`LmIg}g~kT$xLq}IF}r7m6+T}LIeHr*Y`;p7<}L1k z-XD{%1WWJ_fZ9{4fawAc-}|&Hvg_U*&=D|xzBTt%Gp66G#nkWC#7A3*jJHD(T5MSw z$aN7azR845=q1P1Ae+XS0rQQ3Y0hKys~&+<%sBSm!NiJM!Ny zkpz@5y1sfmr17+V=_M527yp0?b5Hgy%i&c>VVgCv?hzuR^g@JIX@dqb?Xrq5fmjQA z32GZ)xii03bV(23k=@O{94Z8E7Ow z)tC4IoB*XD*9D@9D>)QHEdMfa%^!3w1x#kQn#*OwpD8cJLf~YUgjbFf6TL zZgrUA&l!~9NTe75D{!Qs1Jh*w^^5(JSbrCQb0l8MBjyYOE;&`=Xqsh~Cswj0SDqln zhsGJE^B%t}On)K=I4K%qJhzO*71_uifNwlK`EfAfn1`Gky*XpFK-NV;g%B5WNL;Wd3K#u@3C=rRBO{y`ApjA#>n_NRFz_l=UF_-FV??91d0 z?Ie>wq7nEXxc96bH;8X0*8=G_JfoU#0Lu=wLldO?3N=QV8JzA7810x}nc;JCX4Nyl zME3aG?|8CJ5asE3tj`S~AQXLYknrs;K*SxNUN3-WI!*txdJ|xh%B^yHl~bXonk8tEV) zlSHOx;14gZXGi3%)nVYuH-XdRAaUhy4vOy&cm8wrNiezFn2jI;jQT3NKUzrS{M!nq85+~KKT2p;}VwSreYdBvT9CRY6*V*#}OnU@v3UdC$Ye`=HvO&MYfKvWcJ^- zZVUGv7Re{Gis*Km28pH>_lf-EQ)!{KC#$+QYpmz~e>!wKXo_Oo6 zxYTyFmh{?rB^g)fOrf-3&mIl@Wi1U?$Wh6^Z+J}eZQ1g7Rc}jpGhy?y>@snCFLRq2 zS723otwdx@2UGz5%k&hDS(iHQd5Tvt-pEIE_;x=p)bz}6G*x0GaDc**(GN1XlF8R% zNJu{i__$!6@~7{%SLkXqq-2bx>9A@;0#UMFCvp)p=@!0K7c2zi{{*TqU_xY(%hYg5 z;XI}r5%Nm{g5C~(!U!IG&^_deuph$~#rU*h7oS6tVEXnv@FTp`d-ps!L7Fm!h=@Y` z`f1YJPf#p5FdO#^5#p7wl#q`qN@5n{QsJ%<-K(SzSIDVFWeD7S^Z05RZ!QnMa%DV8 z76)$!QTdmR|F)Ggk+u%s*Xu1}-1AqEWqQ?U5EPC^ItZc)Qu40FeZXSu=V0jjgd-QW zp20T{4>6P?80u?tu-;Q;YGpOVc^4*TYK~rZVL}{m2-Rg zlynP%$!jg@5`BD(z0Eu^637^b4mRGqMq3=2#F?l^EDJ%rKwcSMJniGbC?uMggmnVZ zrV+LNHx@V$(m?>2!yX8Z0G+S?=E8pwev{T$VPi7)(H zH(7986UYm@(s%mG!ahI8)>gL3r}AW$yXjWAr*DmLht)^yXi{+3^_vY$BbYfp`i=H9nXR{xXKcGpA%LDqiJwQ zk&D^_aHvl+bMVF#{t0 zb1D90D|2pbOF_IZ$bF01E={1{%Pn3cO%17sirFEchONr_3^mK&DFj(J9}~ZbgeEpG zn%@-RHHQHg}a3ms({vg1WVz$9?HVHQgbMsaEf zRHg07G?y|{3hy$-xHVrmX_>hb3F{MA0rJ8K9<)JtDsU?7HOayf^j?j#&;Grf@Bpw}~DC<2Or(2satUpTU@S7o;G9u9D z^Oz7#sSY;O^BBtEuu_xYW#eKFDxmtsV9k-5Bc2IuwC0Gb$cK@J_(s0kYW7K_VP*DE z%?D=nRP!cwo-mN;*ZG$l zy?w6i#1OLLw204YN{dgr-90aCxP9e3wH89r=uV4r@@p5-@4J6IGnK{O(P{f?syh7m$Ho)Y$MdCZ999q7Fv7|^ zFV^W03axV!>@dQP_+E4a(e2tmG@&XZ6TT9{j{7lVB->lF`4uT_R_!l!^v*sRpT&Xj ze^MQ0BIDXPK@@YNv74O^GK3%9)IUI$zKQ7wm&>7g5df~Kk?uzE8@h!>Ko%KSNhGE}vWjFU*liq|_$sD?H;W@nxn}Q$U zx5%Q)#>HO-5VlK;VVdMqy~+MEgRrp8cnEXMa;VnJ{@-I={JWWgP`#O;c#Ro^FNWi4 zab%AFB8~)yT3iT4K2>m5J{8~Ee_O;BEla_WW!BM6Rol2HF=FXUq6!N@?sQnn!-c19=_bJxpQPYPU6MlwsKy!wz>8v@pgW{VQ`s6d$@b^rb<%qWn zX@kSHZmt{oZ;W=Ya2<; zr}J|tbxU@*;LUMXN`JTY^>#4p?d<9<3NTTd<7X?SP`Y~M*>PH@bjaFuOsjQrjx^B_ z-ID2bpDJ18@~|qN#kiT{IqT{;O5biQ4^6c<=^eZTdiA^|OTKAzdeE@6gm9hQrK3 zbN%&VSmu$3p3Y_B1$|n;#4}Y?^8lsogc8@h z`vw+d0sa&iqC+fYHluntjDcjRwDUyI4WBLW>gNkQTSkYE@y@QSWmUXVGM zAUmu(z74O52=#yoQG~g~=l#%uSkrNM1GOH)T=HD$^bP|QUrseG2_jOz^o26#77Y;- z@(|q}?IE<4J9rUIZL#az4@}r11;^Yt_p1&bL{k$y{RaUm9QyPF@xJtT^Jt!H*lJip zvd~QL*kXFrZQ`WKK>f<;@;xkDp$#qyxoAV=YUyINgSAoc^odxSp$TO}G+wk>uG_h< z(-r&>6IZuos<`u4(pdUNv3JZudZS+@s)U<)2tAZmaxrP7$nRcDnCA+us*&2NtZSxb zPOEvaDjiJOa>c4~qrZzYt_gvI%9)=Ss|cNpsg@l=P&i$*wMI^FXo3SL$)#9ij1l3k zq*Hy|7UMfqr1NQ-utETmI$8NhWomkIgwpktma6)?K)5S)#&@r5TbvhtWPd%QSu+(H zv)^0@;0wW~qvgl|o+y^WN()k>XXknN^OO)k z1U7m^59GHx!SNYmMO}afcj|5GT2f^tvP@SsUmDZA7;RmOtV$Q!LA0D34cETfekI^b z7xnKJicS;VSpgb}$_z7tpKU*hCrkA-3UUTb?!&`(-jx)dcTq|Xvrm!!;UUWNUf@oW znZTebAT{&Fp`$xt+E9MQTY%8&-ZI!59!*AK<>;hS2X978#sHFBpcC6rEw;3#`(RVO zo+Gzr3y1fB6@I@+7U!*3D~HFRTbPZ@s=Hi{|8h}LKTBVIb zI`4-*R7^I}gO5D>xXD7AT~UJP+5DPJ4+&K}GHdCk*O@Eq!tOV*bL|k) z?1mMr08x&zRK$+d8%xdlE7=RvOXQ^R8Q%$Y08j=s7I}2rq;e7#5=$mEJ29KPS6|#X z)zt`%Si^l6JU?D9hqYr1 zkIdO>re+ONqYlcshmUzp7W1kN8ZgyAcIeENRcy0q%%-@et{&Qm#>pY&dS{eBexd)6 z66i2f-ZtS|Cbe?>!FMa*j$^yW+qJ0>=JBM~g&PD)SHaO_ESaVRJs(^vgQA5gL7?Kf z-076EIh2{%$~ngw!rHm{8N$vv;OtFfa2AVKRZGQ@+gbQc`OUO=fYMnfwT%6<*K^TV zTDR((>~L6A&cTzc*SK-?sGbgrYNg)h!2=?_43^z<6@)dZMlw%h2gA_OU6 z;cB_r!J(MXUfJik(QcO7e&s{5aqKtD(vq82w&qRwmfQ;v3)Z>8Yrol^^T*%x2T zgL!2%1!ii!asLElo%+4IBn?EQpXRe!j*2PFMwHimSBj#h+>Ee3lMTZfRS)#)eP2-J znWV2D!zpr8-Ei{fQO)=s)rQe;4OuGIMq}#<9Ar{lozy=N{gzkJdCO#P{*V>=#`d65 zL1)2CubjCe%Wj~pBBuKcBLisxl%I}3ThfK+mSPpkonX3->N6vF8}oIr&Jj`ceo7!P zUSl0qG(zYuX3!&U00tUJx}TBT@?a#?q)%!m|M zAw6{Cy>vRb5i&~MIetOam-|FzfrF@IsgsEYL2L3?Q-r|0o2$kZAurMHmgnFa&(Ak zzIUokWBA?pe)XLv-O-3E-K!KYE{`@3$Dh4&LD#hjY>&yShTJLT)*kKTH`9N4o@9Y_65K~E@&w6ilh%4S)5r~bt! z9^}JE6RA>>@}u9)ZgUznzY+INSL#STP|DCNT*~BSgQouW7Br4 zxT0XApUbvmi~5^f%?XjDR@wGBgR_r}pOLbuO?)x4HB6pgWrvygl4iGW;{A4aQq>UR zc0gpQ>5tLf+5FB43cqoNokGB|JSisAHic<>yTCarO9>>NIE|3fyX_*oBPQgl(W&C!n)FO-XsZ?ANd@a_e*D_Sm@OY_=_Z(S;U1Oo3^Ks&}53YL;AlJ z*eNcl;lAW}cD={s#-<#l50+65kJfeOo&3;IFR+D{@M!|J1X&u9@l~OZ$J7$ANx3=f z(lj4xTU1+Ya*zSZR3`-vZMr6Eq<5<<3F|G`gpYAG>lQU6HpEJ1DD767#^(-3b?vER zz;`hD2c)R*`%avQ=1SL=B#gz$)^Mv77FdE157I@QXtJ=P`bh&UMS16I<-B(>Qv{Q!#9WaY*S3ohE&r*&wF(bV?$od!=X zCpP=)b`CWfnCsSXSA9&Mt57-u72mK-d!<;n4>jtWFI98fe@t(#P+A5RpRi23rC4_l zH5!^P)o`DDOuwyAdIA+cvrPN_H(0ouoAP6NY=zPQsCbKI+9~DW`;f~g^T+>5STREf zdnO!6VRL5-gi@Jj^ePwk+;DRL(wu5g`ttoZL41_bmyUngWR&Qz3oT0eu1At}tia!l z`M!`i{pX&cnQ%gb(ln^}fMwbx#ky^XSKmCNnp^o}dU1u)6{z@uWtvrX=wobh4F$8I zkb0MMq0f%o!%)Iy3jNOiE)6?F2}3FLDXg+AA7eGEDat+xskb^8I`7E+e{b+Wod5WG zBpM<|B+5nW(#!2d?a#^GT}{i!Hf8I_i$UC6zJzynjSR`Ha;d1c_vnOf64 zw9*kV{nEhW|ea4s8W)qr}eB*-a?a{mr*0L8q0SFL@%7LW0b1n*T7AkVGc& z(-5!1y>^+T{FMWl?pJmva-PWkwT|7^5Fd2gu&(6@p zP|8&b>mKXJvHyP?sy_+ow>q~u@3`y?9So&Rr?8f=epG>-01Gv8V-~qn9LS}E6hqG4e9S_ zXHHHHENdESN9dI*d@0EbDZpdMmKA;0IQ$kEey9O2escOPkT9oMs`7-21^?|TqkByR z@svAG3Xi(#nWq~LA&}p0Swc*6F0EWNZ1vr*alO%Y;=#l?sq;sVL}ryXE6_~ba663@02*vysblq&((SAplR%ZoNnYYY2 zBQ~e5RzD{E!(~lu7ps~mJnz24NxNrd3{I^%uuqlRv9~vw1UJUKQD!j9itnGh42P|t zko6RS&0&8>xQwu4U+oZ!_*ecN(B!^v!zr4ntDi0BZYGmk-!9AUtH@NiZ&M?n&L>4# z(qRCUC^k8^^PWYWSxBtD{n?R0BqMlSa$V%@uH`C(ffl_Fq0DJ{+<(js;gu=Wx`=4s zB5+0rSvGF-Ai{*2zGIvD8zsdh`S?PSz&bk0DtMmejm@q@4Bmc)ml>I|xsFkgClY*Z1@Khs6rETd*ga4(A z(;tCnjsqdnV45@pJ7InM&Cx(5TL)(!*Ebi5aIqLxb-wz!X46mK_hyPNHY|P_;Fwm> zA2un=t%m2QEvnic$)Mw-MVBrnP*P@r=}#hfWs*aK`)%793P4Fhn36Nh)|*Y)QF8{H zwDP#dZocPBD(`9%f7{HJGUcntr=x+q3)pB6f>F1G=>|$@_w*|IVkA8Bshd74LW_RN zJ|Clo-SDt<%*#tUnKKFfs>yC7WO66V_vn~r`SqOrngwiZQxpA&zc#RH%G@FHv0Y^T zr-)HgJI`$_f7cgbS~qt;S`fWAl3sg(tkKuV+?G%Aj%{Y^i8wQvEWaU zs782Hn>mb$5r0+ObX^>Z{f(*8Rs=mM7siSV6MqJ|SOlRafc9a;XCh*pJ*(%|V2 z;aIb~4O`7as^3#`;m8LGxwmKx>E2adn{~#!^=bUf_L4|>KG1uhd-y8=uK}}$e@;I#UwCOPBCI+|lxve2KbYR7HR>a#r zc+ipRcFBb6P8n~CU;PG+poT3hy2oG{uPp2?y3Zh!e0lJ=X)9VP0Rz+m|$`7z5|Fa(;S-??@fg~@2me?3N z5epZ7;P!TE?Jd!(^~cm)yEYr#MC|bW8&V;$s=H3pd%QuL>w;9m<8Do@&Rohm0za8w zZ63_w?=KVaS$B)rQ^#$?wH0eXCdQqwBSE)bzAYDbzLL0h!kU>h%x65Qss6m<`Zu8%w)kda#Rz$efE74aZ8#SxCD@&j{b5 z%P676l~Iu#H+^en4XuwK316|g zsCEDPRzQmcomO$ZJoYp#tn-5%Tgks_hBzTyV0Wj!Qh_F>Ii2f)-aHe|&L0gtiEHa$ zQcE(LhO1$|*Tg?d=qw9!)_P0mYU(b^1|QWA%EwCR9M&Y-L_+Jg=}~hd*{m^sUQkX^ zw*IF1OksVXCrndVuobBpgZs|Ot4bEYuekmZSMVn<-YR1by;7}G`vKcH-fJmM0k8CI z&H4kQf0cRfST17?gK6emdL;}r*tf&p^|)1JyZz>c{r6OCRDtY!X0l9JIt8)9T?I`n z?@#7A|1z>Q7$YN-{R-n_e0#F&M>8-!W)I_II50kjRi{4THlU!g%))AKzYgPLnO02- z%W4%7OSdW~DQbr7537$%cC|{B`otLVlw0Y`cwf*Ltpj*Kz3-;b(pStsC6vcsR=V0e zV4t^!oyvVu4=<@JYHh^`BxWvZX`F{`Xl*j!5yAM_i%ETMzhxp}6t7Hh+}LWm)@O<& zf<<3%R60nWN(Nto`0q4xIC~(3@NeYNWO16=LDyQWo--2MQ%ptpxkG`2KU#D@FWwc`&vX8H) z`X#?B{b~IfDI}O56a0TM_m)9*L|wZe?vjHBcL~AW_26&_1PJc#?j*RoI|O%k3&DaD z+}$O(6Ow82es|`(HMed})y$8n>a%-$clGJLd#`6bYwZdfOkw{hn>1b16Br5ZvFdtB zaWF^6pgQCByAmU}Xr>J?PQ!@}llgL`ky|#?DVTHsdx^o=GRMdbThogbL~z?TFM_u= znh{rIj}4;5@k~t@`heRIId+N^zd>#0Cc1;RBR6*XX6jjIyK9OnIDHLNR&uXu=Jwep zJDtS0>@*`VJv)t z3Q=TzrNT{1eiis|sIZag-tj#&vv;_aVEiqWt@$*@T0KKs90TIO#rEoPiEl*A$^Nu7 zl?zR@Eg{o~x857nGoD5=?Fe@af!G+wAlhMDioU@Kw9#0;tE@AWC*Rq0Y5H91_W9{(~|dbTk;&wl#SwmstDapw_m< zW!}C72Mee|32Q!+o6IiXF4hi@gS}Mm5$UWjr<7zew)q8Zb4Y}bSYgKQF+XB2lonyy zW^VKQlu4VoT_hE<3@;HdIig&V!wX)r6p>JWy868%wp^N5H5eF@#IEoClYv#xBlU)u zi*Yd@)GMasf-yB)DXCfzMP^EXkFQ?K>cAv3?&uO>jjGy0r zu$}yqjwE@)!B40C03yWeHYvHr=RPUvE8sqP8|D%sKy?}9fE!NcugdhOEMJuPSLFz; zW&hVtA$;wJ+>V0)ALcb@5YXUO>EwR_6#xjr{|YJq5Cq@<&0)u`w&pxJBvxE5z7#F0 z#?_%*A!l)4RPJ4!SXRCPXp+~QvlZ0tb?82-X`kid*|V#0okEKF)=kRW51v?}dD6?z z+CEF|C>8@Pq^JLPh=EVCW%mfDzG+4c`}n8y{r>?ZI3-)QjWp_*YE`o{eM(QMP#9G! z-unlabdB8n{{>R`e+dx$cSxbI{XivYb5_WGfEc68+T7%9QOI5DI%dt;9PZ*ZiXOY> z{5`zOWm55FUWlhj`(8&B_}jNO^xFZKQfUO)B=7;*bTo}q-UF^7N znm)%3)1Kx^^m%csKv)M&c43AUgo+j6>)au zfAnPLkg{u8s8>K^O&=<%bW`d8Ve1#(*cD~}jmV)+Vr<)Fv0bY574lThdi9wM*Ajzm z^)MZH?w6C|=kh7_Kxf52;;L(B)n}qdi|uQ=YjtnR%=R*VbH*mC!ZR-HvVb2~I@+lW zNwdmU*5*i9fSZ{Fmbp5Ke+i)%cE3rDb3N9u0QDD69TfjqOSRE%$bWTG>`v9$%kW|O zHNy3%C&93=>s?i@lPKb)@ylGgqH*wQ(>yjqMM2CT4<=lNHl%1eVy z(G~qzNmD=y#bOTLUvXQLyRNCwSjo7*w$iBwhgZxXb97SNZ=$T+tg(PjUa!X6q3i7X zZ9C$^38~J15_|24sX(II+oA33`~Nm^a6*~|wCO(k{(lEY{tFiQ#-{%wH7C3L5v(7cx074~8#Fzmj1!V}inj07sy2_mBMiruQ z!BfYGp#lPp2;^#UicK80H#GZsMsGv!`p!ty;wkw#p)gTj!4M2fQW z{ChcwdAM9LqYTkENVI|ZLjGClsaA6Q321oRRS5v$?ckD_R!wG^?|I1pn4ZQPY|6gk zIkPnBR_!|2m>fG%-^@OjzNC&xpV>j?B5mpym>WUnAX!*!y`Knt+F}>M*@2|{yC{^N zCzdEd@z!|1g`D*$kSn}1O|<$CH0v6b$m>$SQnEKJzzLyeCw%}kugXgV4J89Qnho@d zzrDlz=fec41gxIic3pLl8ZLm|hP)XZxcS8`4sF zc=(mw?DA^=^9-u(o|@djAe(WXjk_m39(3 zU}BqU;XH`Qx|mZo)SQX$x}Y@{-IpQ4-_?+kMWRWW%wm>4lZU9tg(swoB4zt31Zkpk zlQJ|Zn-CRFft|3wHnD;(xwa(8YTJVhG(XqN;8ANA=EUi_P4t3fOYQ|J)VCMhY&?2l zIID(<9dck#v3i!4z1J_Y@D|;$-yy+7Xwq*hu&WIPj)&4>xr9aqn}|`DfGJmUMH7yY z6RG!g>;Iji!^(*vSY<48H$k#kYq?<~C2`o$o7U}4yuH{%4$>ixbXr~cHQC)g~ChVxVMmpYkJY2>sD}%>CzdfaKsBIry z_y;)AmIhU8GC5Vt%CNH2d}G6(!K4{&qot6wMmqN^K9@^zRutbB+xXC>myremYuC) zomGh!sztLGQMzGL*x38Q1hN0U0Ov*-9ULFlfo*3T8{_nP=SY-6J!fbk&lm0IcP|J* z%i63+kEq!3XtGTLfrP-mzLNFiSB-58EN-alRi`C@X3Rv&u=5oA~OcR6t7J+Zce6wV8D<89*U!$ySr5=q62 zTQVWWqi-o9@Q$Jyivhax%3aI%c#MDph8B2(Ra2-Wv2kvZ6aKFoMC7o(@9{j}S~^YN8X#u9`4MXhL44>6;#W(=oF;^@s zOO#p6l-+^04Er8-v+$` zaCD;Y4WCgDv&sdaUm-ZUR#TgAa2hS$*nR*8<8tjEzWfLCcUL#I0VTlmp=<~=@7Xnn zZkuz5Q3&$k5I0$u+W13^kUy6V6;^qOLNPr_#Fdi96ScC6%o^VeT0``u+zINZ;J)+& zpk>kF7F=gz*p7z$_cukw6;Bb>t)6`s*Yo8+R*`?QVJCSA0yBlLG^>pJY&5c?cEpFV zY$(FveTW}E0LwCBQA~IF=Fy4D)ZYu1)=4_kL7k>~I+~heK1K1x>Gk!J0vrYzudog% zn9s>0JrbEXF-UfbCzhKBvW)zO2uw>Stmoz!c%E?af*pt-Q-(tfCVASX>?udj3=sK} z)d&oPiUkrdm0%?;N&X5H9t09WI51BwE7VJ)D9YR^~(Hx)$g> zGr=hsGTEp_nFhnyZFehRVosH32ulDS`vdQ=t^_yqTR z_-o}JwzXVgcteo5tI2nwa2a7&s2b(A+3PKN%u3%(OcBcKtnyqSqt%Z_&8xm%?r{tck4A0d) z-Kwl@k0x9y(dzfnK?8;}F59#TKbx%a!UKk8wq1~qnkoay!zo=vB!3yaCnKE}Ud&2N`b6?R77Pk9P9k)n2{<`!N75?P$I1wGl{oB& zk!kOZ#T(d_v6MOQhh?^K^1@Q4X&--o45X{%N|&oW^mbuxNRMgyIVO?wT5`Bg=847P^j z=xu`xnM6+KubQSYwBfjGe~^f-dbp;@CeNrIXxu|xz zJ9W@AP%Yvw2$_L`lzelFF`rm#e`M^L9BvWGBgcOvZ4!tLVIX3hev4e5n_X$((CVdt zp!xnS$nZod1vko8wwHBC>pQkGiL(j(LB!Hb$k+dT!Ya-DA}_WDj{NBFT)+?|B3<=b z68~)tI7vJ;>YX5uUn_d<%KcIJR;q@ z0S(vJKX+b)(3DKMQsd^KEZ^7^@l%22?$J#`p~1^Xae!PV{KNd~I%dlC$8&+v^oskI zy{!4?!zUZ}LAwS?LMry-=cB6^uolG*VaE%cQ}l6+wW_;LLHiEj9LYlIS*w(*5M|wp zgy}zbaa(cO9gtiE+{pjb-GbH78iO^Q^<_kDiD$FC&JsliUn~6~+&1zS z_R+$O;52-?R7RX-J32d@vbAAO!OYBHmN+n?)fj9oI%^M5DgC}1Q;NV;Ro%QN7uDgI_E({SNo>nQAe7h0-u^Qt>5 z)o3Kje64W+)cCcp=-KhwRfHrDkTHU7PdkyC^kYLIYm%IH;$EuIT#1Z^scK|%t9-+w z@V$wt4-8;aQZ}sBN;PnUp`fcS%h3gk49qHBupd*^jM!iBfLY}!5?zmG+~kRgn&YbU zlvb05b|yBiNlsxUVxIgbVu zeHs}vCjsM}Lo2pZhfSoJ!#90rwNy3tV|w|=JeIfoF#Wq{lkAn`X&9U+HBUQ?X)?7M5jAt{eF3WSlvdVmb2RSNKh$r zLFaz$TFh%|A*d8m(Ye3OYF&MWJS$GUlB1L-Dm|`c;RC}3S_@UDyd~YjE`6mh0H=k; z2RJL=GF6xhZZKE%@rYpso{7?siO?~>M>BK~4LdB^*A>`kOk|2^9N2Xo>VN}n*7BtAZ z&zCCZ+E&@m-R$eh@KfY30LEX9ZT0ia#?pD}1w>6+-_PXd%H10Z7=tsF0o?R|CE7Ko zLpGKfcxH~C?RL(eVcZ(t+d9^T@QtYC(wLvyN!vT=DKU!PkqtYOL%zPzbY61%lbQu@ z#B~$|xAM3F$gC@*8h5k%TW3i+Txt2nmUFFmMT`V$hTc)g?#9s;mD!)$#R-fn^Xelvd509wl8hFX zVe9TY>_-lE-BpUV!liN(K`N)z`#q>czG(CD*6dAeeZWaJO$&XPG#}{fEckx$G+E92 zM9h`(O{^1Txj>Ld5_u4aPvQ$jI%rN&Oi*qyfQ+w(4sfFwE;AuMi&sYH+VW{uy^_wA zO7pbqM-$5;8qy^_(P!njjWFq@?YC{Nk(^>7l7q;g*ndnAV83x=?AU~ERd&1n0+;KQ z{sQVpBuY{mV3A(mToNKfMtg}NyU~lB&c9q8W27$ilVF zrZ#^?3-v)zvqUyOWX=qcHk?pBlO&DWN<(qhfl}VPVzkFw)SNwc^KqKBd?e>!(yw zh0=EkQJOgDRo)P0j3Qp|1^8r#eb{=vZ5W#r$TJz531~2j|hDE>XQTv|+c^^*$ z))Z#FVQ9x#b}eN!H5@{L*O{p2FBpXa2D}l-bMV&0T9BN{WoZi0+Q-r(+Kfj=DL_Wu z)I1vTldB9KZXMM0L--I9jx)XM4StCX9r*1C0G%+^4L*Zp3fE(`TGRfjY}wnn;T$+~ zlzVK0XS*VLnZ6I+m$!!@lhFXQ|0d(0DHG|1PJGZDm7JrgfuQDXvdV8l5Z5u0_BRe6 zl9R^gJMn4c__Sj{ZCoXH*KjSYO1fPrIclgh((Ghk9@#Q# z=roCZy}C?Q|3E?F4c{b|wwhwm6MvIjfQ(t}V)=4Zh)JDV(4ip3{D~DOTV&N$*kbvs zx#l8+2uz*Y=UJnQ->DH*P7MVR!L_LJk1BM*g)atFZH2z(RJOhW0Gg5egix^XRLD!% zHD5A1b$EMQ`SiIP9qC7q&DccN0ue^$Ma|J2>;WQOGM~NgO(FY1rXf9lYM!tgT(4n; zp}4H+#HYTTgpsV85J#G1K7DlH`|G?u*!nLAo%S^+aF*}wTS1DLt8+hyUXro<#>jhs48&o7CpOSmA!&oN}Xn($T*tFjZ{ zVS6gw>%0p#&@7*TfsWt*gDwLNQ*kX}fHYboP4?j+Q~_Y+9fWS8Cq%kJ^f@#EVPr2< zuMj*sxAZ?Nuvdu?uL{^4{1AJ#+zSQuBfUc11^vG2b_+Z0! z7SAgce7*?Uis$=~PBkg9#{LpzBq^&sl$0f&Q`g0f?L6dRGK2R`s%ko&YKJW&4Fk#Y zyp?i}+(rD5Ge@e{=Rotb^V=10z#nvV0T8?P;Sx*H#%xJ>SA1Mgn2`>qjLeVa?i(>h{)(`*G@a>eS$fOl-7m@%mfB^mIrf87};)o9hs9IQnNM%;DUd%kb5q7;Uo!-o6AlJCW2rU~miW78BEwLHm!`UATMER5Dio*lxb0ji!? z#+5K&n{DM%p#FZ*w@m96u+1)V;3%(*1Rk9X@aQ6dM>l%F3D%Sc9$oLC9p&K&gFsjJ z^22j?UcAAZMXu57Xc7eTL&oIBgJV~(|WCwdiQ|0qlVb$BfPwX#15tJX|u?kS%>98mDzXfipe_Yhd zU4IS^{yJCS38lJ633_#;#?~5NE3;9s`^{#17_K2SkOSKP7bSX)hHSSR;u>5iUARMZCX&M8(pd}G3JA>*2sgAn+*Wqk z3zC)fEZ92ubt8Yo9d!E{o@u_jf@Z?T5xf8{W23Q0SM}*A+=8ua?6?^$NQEc=t%<2V zZR=;HWZ(2nFYs_D{KBX5*A7_9N4gapUMd)#*}va*mcKTlt9UK2uliTe`mf*u%NMo! z{FABvAXWZ?Ik0-{?T!LQwiGb3zyFapoqJva$#0pf0-XB*4Qdv?IwQU1?XBlFW;tD_8rw4WxNuLNbsW9&5-%muPeampafg__Aq`@N22BRWQiQ_b;D~? zZ7bwOOi894OG*}BRwW%9d+1+P0a14OF<($Z|73PD^%0At>Gm-EIv=0%+g9fxt4+4Y zcIRPu>Ghzhi78*ub^au<{tms)2ed1lhqpye_(BJg&z=%NAwalTZkOPi6OjS3C0EVuAHi5Ff>DUp-`ziFv7bpvBj7~c(_B?eFXD3xlekJ^s zU2mRnHgjW+?#in%9SIr;jA;{He}L>3Sb6S?<;Y~llkRVkoy1gMrAvqBzw##ZA9ly(^Q%^xbL{!^w7G9%DjcR=p8qdE|-@@K`o&nOtA{QupX%l>BUb{b=`! z+)$sU%+8}=v>#)>*&1<^o>YEl`sJ0-_GIRW63lvk-h3jvFPAZ3HH}=Ss|2tVhUyVx zgr<;W+-+#1NHfPTC=2btdviZu?M9g)`+_p!)L*2>wHx?Etg17|u`|41PS0?c3pE4< zEcG%zAzQw9605*%-BVA*p^cmI&`iYXgb7A-P)jsus)ln=<5Ql4x@T;f)wj`x@hLlx z0UOdmf`l3n646Zo9>UQ#RgIENk^$As@fVfT=A~7Zfv{`^+(SWVK|5y4E%QF0RPUlH zwX69yCg#?jJULjT_EV_xqJ*p%3v=;@ijsBsCh}C?0Pb-*O=B^F={9zdJh9`CA0yj_SfY z?HmAIBoM|2kn=7n7BV@v|ai#^K9=8EC~N0$WADAUcum zi2%I^Tv{TQN*AT%7bV)2$YSP-a)n0~u!7{aAb+L|*8vTuy>qqvyV7mE;V6faZ5nt& zqC=D23EZGJbad1N>C^m79>0~d8_A?boPWXsj2y#W^=oYCKdR2c7P!3C7MzR;a0F7) zN8Uf}WWTw3Sc}eZfgViS*tD&ENcol2Y8Yev^rAck;K>*7hpIo;3)sO~&2<2uIKyvA zr!g5*R=$ zkF3v4xB1#VUstY?^JDdPN+;sZVuA~j>N7WmU5!ZP$8pSBd|zaDa6JJn=GVF+3~Z-e z=GqCeHhHmYk~mehF^FTKpR`dz3q@zSV9`5t3TCN0DB`)i?XKR9+AEK+ZV-`<447xL zhg{5i%9XbkB5q>St18xgm`}WDOB>*9(2t?axGbc|X3qmNFuztBzJ>Uxa)4`+L!yZ~ zqVI5B?1RR$Fv8+^HPs!JTz2=RlGGx1_&DaSp}0HShohtb8_?=aSzkeSRKh1`Pkb)W z78zM^v4%XCxMk~gt#yP}f^1~Io?{5h}j0s-g0sR+m_9z zQzzh@Qd6dbQuobg!Z+N7e}hy_B>-1XGFHX|FG2}*_wSFmy2E~n4NxB_s5ltIHp7dD zvm**FwBe>bxui{@b(lp-?)G`bNo%#pF7_S31tVvG9ijFfb;)UFVsmr2x|H~ygpZKxZa<-oL&p3#LkcC>wBsR%7o+V<}8E158Q(pYL zeh)7~{A5=bvFA9yoFbyVd{nEQ0 zEPeJZ4)$KjL(5_JPf!++)$J~Q7CV&w%(C0_g738X2ifKK*ncA5_J>}u*S`XtSSU}d zihS)QZ4(K*=5zj=H0`|qXK{9C?1k;i!PpD-;AE^#A9={v&Um8@=gmK6a3Rm%;!S{C z(AW3c{C5XJ_A!80y3IfGD2V^Aug@;z@I@T5n#;M{|B`w}-1==EJUah+d99jPv!eRX zzmcr?oWFE6zobS8IW!d5gaO#CJAmC*0koXEaarvZa0SJ3j8@fj^MX}=^Md*g)hD(m zz-%_=TV2Iv@NabQVc);XNE3>wL);36d8BQ*;tU2pS~<0`E@{5?;uf_@rcwYTB%{#O zNW8G5`c|xABK)V068J87dPjn1Bm}Cv?~ObJ@XnLN&Hl#6C>xrTDa)QR5=50R^}=a0 z#~sfb>w_lliGdx@%g61fPbcA_@s*L0A~~M%n{1lDqKw?W-f1|RSiRWc>Jk+^*?hH( zNLPsw*1aWfsfO@IQ20^M)1%TwoZya69(67gf|A={a*Srtn=cqdGF{v4WhB{yBAuVUliC0 zZ{yV_uR}O6uILHV76zHgH3)Fv5WL{WVf>+8bNQQf%izG4qj5bx@rI9Z7n|s3;xjAE zs~Cpdf|hviqUep*-2HhKoxB;Zh>OYS|I)rdxB94I3@;9xpvIR7b!-Za9i4d!PJbtqO>!U8QE@-`pv(jMg5Rz!NVD|3>k!c1zjVU2BGo^DlzMvkY*FjKWrN zUx|5DU|4o!4_ez8x6Ekhmt%Z#6F?WS&r^E7h%C(OW$4I87*<8p5uJC@z$w0s&-;jC zs@(2pJ3Y50*Q*%hf>=YZ{`IZR`_)w1fbfc|9Kjy;DV@nqK3DR-7~*Ej*kdED=tkOw zL`G_MO8%!LPjvMfCvO^8)er`-(uX>qt(8Av7a zL7v*&FU4DydE%RZ6(DR$hm7MgSe@63l086BN<*8^qMKJZs1n_qGAqU3ovkV@NG~J|M0Jf8y9f~b*07`B>s8)Y$+1Q zugoI`;!Yma5nreJIzjpS?b_h+CTdSGqmn#gI_+B}>d<&jaDpJ~rD=SM%FoXnFj|TW zGl-|DEO)lFA&rtTBT=!)0r-;fKCF+jE;y@piw*NLIe9A8DhH}uQHerNlqL{+DzI+Q z*gHqZG_WZnm6j~;VMZy~6wtsVlt#g59eKS=2k(VfI(V~(kEGe(d?;N)U^Ks)mQxMM zEe+CE&>7dpX8Q)g>SV*UDk6h%R6XiIJqjoVQ$th{j?1u;&DrPWRHce3Eqgiqt&2Y9 zzo}6Cr4>FxI-FJNBYt&h8I7I%f`m|#)Xq{BkFC1aIX4zQLJjX~%RM~%Eh~$91yhJ7GS+pks9Rx^?W(J(XCM9-&?3A z%RaPUh=ts=ELY6LR}G$kzr;q3K22FpVkn3I0lbCKtoWA6UASErW4-)(nhO8p1~hf= z`0T>oHOFvDdgme+-N;Rvcqitcdi#UB`?$9-u0=2PLr3>r6`d7oOb6P7;8kM;?s@t> zW19x;_Za708NlhMifo$H=WQ8yCH`3A@HlK~2ASZPe~|#>GV_?mI9O@Q-TwFsm3a>7 zUh9F0e?`5;h~_cip>V3LxmJKvA%Dl`OdWNU&4;B2s%vz{lmxJu$$v~w3|DB}tDAh@H&wiH@(cBAg>EBCpe?5GW22}82^zx< z`KnhR=wx%q#*Q-!gjFCW0oxoqTPsMVFdrR^hPq@NFHfst=$$*B9ZiFN}w zHkXpxhcMmu8$%&hy*_}%2Z1Hm@~|EY_mCYv@!~j{xgCbuK=7IbnFW4Vy6J6BsF9Q` z-CQ5Bs@29H7=~uLvQTOC&OhAU`s-Z}1K@S^P=c=E?TJhPQ`Oda*2-%rd$1K6=B$Z@oyA1%&QGtvohzqL1MHFActg_=bQpcf!)F{l_^-6edNE}_3{m2uOQLUi zdVI;3!3HB@Y`*DO4wu?0#2B$NE59Y*c7^|)V`~(4&kEp?4S%}vl!?6>vS8cY{^W^+ zu;QeO6$F}G$mzVhdlpl7unf;OeI zTP-H|_rKmbW3qBx^e`KFT`*UEL{B73c2Iu0g2i`Dr2ieU>$sUuy$p*_bE~Z5LT)b! zHRb~{eKT^zsSJ(Vhl9wRA%`N(EZ5^7iIvw48%b0g(F^{u2{>IxKEcD(ae<*@juw8L|J6a!w&rtE#(Z`0-&bJb+nPE`=+c+0b|U;?zAY20 z4$Tg0;J>^0*W|508==*@RaVF0y6l(CRzdZ5`LDOkbu<6Vj-A7r2-@ab(SRR7IaS< zoIa!FSk!R56$8* z3-{L=VnHk}YZ2A4+uP)>M*|nMJ|%5-XT#ZB!$l46&z`+7LwC^r@u zTQ~>Br-SzWawGKR+@Re-gqlBJnZTAC&jNhuUMC|gRGL{1QyfN*-JTZ$Bz8GkN1tWG zS4Y2Z%~nUBthJ-{>D^IBctvi1w|DE4<#|VN1-|MAiB6Zrv)$%#^4Ie}ReHWpb{p-S zY+B@YqUi2C_P5K`er@?l9dOKRobq3nZ3C(aKeJ2-Tdyy}Mb-7g_NZHABeD`6lcY(q zlFbp0b;8s>!rMvKwrw$Gu8{ z9x2nyhetj5y-cG8lO+Ak9@{g&OQG<56pR$t0emfqt#Hl2-A_Q z5N$NpY_fY2xW@Z49kwjVb@2CY(_<){UrGR#$aMKVZOL>Jj^J$S&R7sveKNJiO|a}H zS@RM7)47b2wY>-S#naB@PydV%g6V=6oi)S8*jih&bC^N+v_C(7asFu| z85C)0csOvw5wVlL-1)zqek=cGoXQ|VrPVFd9|MQAeK8<{)>MY;M=xE8GE;%?_8G%v zM`IO1YMdE!#92`=cKUx}lHt&<6s6{Fr^bV!D9 zrP4BLg;5f*whOC747ylcLSzKTVsq4AW`HL;Us=fheZ~hdbA=G%%BLq$`!Y{CQteEN z#D~Rcv~;&`$PIa<+G!N|zBalc^nJ#o>|o!VkAqtZ8BRwgS?Uj~^(eX8DqGH@?|kgu z1y3>+Tp+!n>e$5=ZgJ^7NKt%%abw>C9Uh_A*4?liD2R*bm@q~@x5|sQAm2MnikfU@ zOFleMi<3J9=aZ4Fc1ZtHet2p$VrLL48+$u=9kXq)laOJl$|mRj9KcmOQzJPSqkNu4 z5G#B%`n`9!t58W?g&SJ%Q(_yThPnKfk~0>fo4}OeTUr}eHUfBTRr+#-PR=qSbZ`0} zwO?UQk>?etwM*nT9m~%*Q#<-t3C;wCy>ZfevVJ|HK6DG$zg&677%Ocvv|3QpySqvI z5g)%hgN;g#IXrzdP(&Xi%%;DqEaP}cPHN?qxHXd8Q$Cwj(SsahUA~Z&(@#KIx_qZr5F>rI-NW@^v}Z_N^U zX4|jZFC4O1B(voMoOS8s2F|n&SkJ2}??$($X4XqQT|EitOEp=3aqzJ|Z>K$fh00{2 zjCFdXxpGP^7w^lKwc)TU|9Y`ILDIIbkDD-ZPdd9Z@%Mj}M zA4U35=My~QU*L>HI(@L8797$|SCP7Mbq(2h#Q&}$y*N|dOh*3{`R|G6-)>v^JmTlh zhvDZFXfv{hJLs%Ue2%28ZKdDQek!c_vaS=%7WC%*u0X7GOdf*!d5vR+ge+OQ2kOOs z7fR~GQY%Un*7_Iy*uk%b84P_vccLtt@Mbq8^5EzIl^KuRRMsFOM*$aQGdWx_s>(3S z3dSIn6n%5t4r#0cW|zeFEDF1)*cl*oVoDbaB7|tel{$`}*&yqiwmw%P)$pn-A3U5k zP!_TuH)7JoPefeY$a-TN=8pJL6-}P0?EYRee4&SK=j*r@o$DD%3e7XWM?65V}iIA=m1v zeq&I8jVqK3MKEemeKBZ5d}aOJ=1BV+h@NxRfEndS2(e4VDw%T&FZ2;qp|6TB93&Ry zr1J3gs&*pcw?kh85F$eS5~hD81$ATMtWrbBZ|)mIn=x^+@{o}1rvi9tF>tcj-^8sS zV;>8D5LHw~M1kwC%C~AwD7J3Wg_h7~&Libo$g9-ye8j$)gRyFD%u0k`_Rii($0(A@ z`b-sLAVtkqwh~pO~Cy1&_imovf^c6W43wbF&#?ZB+J1N?iE&hqVK% z<*onxl=0gGurCdP>iGzRpKXL~dJyqy=G#g${9zvvVt&-OO* z1fr~{k;~0#Ar!gvd)=vDDvYikN!wOF;pWXO9^=M)pY*VwPiPmYD-(#N@kUG-qHoqBo~0qS+;4(A1ZwK{v)H-pjB zN0wnhFBycpAu&_j3>NI+>b1s|O@!5Pk6@N(3C4djKduUO7+F@z(q||pmxw5$bB4Ml z;=rBG%OrEGL2(u527(?V@ZBslzj9K&P5*LjprhAKwH5TU;9{BkQL?u)Mq%}h{hmro zqOc>bB;`1cY0qbpl7x>i7&IjWzblM~0VxZJHDE(%N>Dvgv-0l)_SR?kchFs?D+{Ig z51jt=z-*5OYM`qxj~PUdLsILHPIoXDkr@N8m%#_!e#c)jF z>=0Q*5xo;q(J{WlG~u|8@Y^l2=wl33G^$6(!0T@|=3o=AMp($cMT796({GLL5N-9d zqeJ8;j{FvFMxof>I*ystA|0!m!=r(jY@W!F%}qRc4*D90Rgsah(#9+&IVRomRra_+ z^$DgFJqD0?StvUQB4FGjCB^Mv|)*2%r4ux^9r&xBLyWWeYejBKcbcV zqN>D7FUj=wXwHYA&r36*q99F=h{n@q5P{0~9@)QP7)5JJlxY@+EUTk7Fhy4Sok(JcDo*4puP>jc&v6D&fr$~~n->8^D%GciukmDieEfX~$8cQewXOV#z{P%vB; zuG^UH{gD|rd24-HM~~?LAndKfqWYr0(FsDjJEgn39HdhkBt}5Gq)WgVK@gDcMnJkd zbpYw^MnJknLP7K%zQ5p_s%qsZ~3mDDQY{)zJMzGCA{t8 ztN(@=tj>M|ddmG9Lfj_Wbu`LIcmL2w=9!c*i{^nGP*r>nCn2*`pZ=8bh1+_8Up$8j zjyT+Ahy!k#@P)f7P3~_s<%_Wt-fwAqf2%iMWd7K2vJ9R>2~%_=$CJ zcK%nmkU5vXBD*ug3oSBSG^q`*)78e>SONBKs`_tAb zJ}I41u1bMojO7;ts~z-YbdD!N9wt=L>;;E!hCO~_;gU@)CR|@A`dFMmE->iHw3nuW zWYCk~TWF&@nh4yqXShzY#&g61L%iT=;*@8sPO}tq+LqUca76o9K-%40k;V^l;83pY zAEOZ*^n)F%XOCukr4RXTeik})n0%0nw>TQbM7UK8F*qg2u;342B3Mk(j|-d2ScM|r z#r;&RnFbHug3i$m@Fs=a+s$CLKkM5|HkzJH59-Ho9YRr5)3~9Y+1^|;x3FQ4X?6*m zM>OwuWQ`jp-X7YIU?Q5qP_4U589}zZ*}1JCkSa`oxacpMR-P~K6dOjO5ypj#*9^N; z5v#~*@x(?ld{gpLV{;m8xh4xKQTYMRe|>WZ(-r;m^8FvAixN%wl{tf3wdqj)NkWMQB5DCoG&LWh9DQZQn~)~n zsiJeq#egV_oWOG+fB$ODwV`a+KsU*-Lgk$W{kBL1;xkzC?MH&_FQBW`J4K3kF-9}p ztc<*5wCojC1udreg@57G;V%sv%yI)nCql(%G^iZ=KkH1$>~`l?T5&M;I%SC7&{0Hz z7H7h#Uwb!FT_B;a(lg?mnr!QgPr8ftux2s7Z!Nw1M>~t3d{Kb@{wMg$M>!VYq~0-O zCc-@dv~&xD5CzUNi&#_id~MJb1`AH-YfKPGp{U@U8%N0pF5krp{aV;EVwD%hAn^w2 z4R5r8%*vpF1*wFL>ozRvdm$M}>ylu$q3>#0rn)4hG=vJ_#2>5-@qK*?q?9z2K0f+7 zz}1_b_$anUAOmaCooHXVOgcr`I!UnYy%ofO^bjGl;|tY}Q|EXW;vbNyCxI)j$w@0G zpvl=;f|eRon8Yt0iI#lR7>Yjd3tL% zq8!a=UqI!mCoiPz;s&Lui?cNwNVB#tzmLo~jlISCy;V2bB^F^jm`F`_HjXxUd=U~W zR+s96SQX2k7E2dq$>wTXQZT^)GnwwPHeVtdO+wh)J&j1 z#ql7lc@X}15Y8@%iR$a_F`u7y7Z;2-7iLDS1|UKa^owaj?es2OhsVmSy7oX5rJOYu zb(Xn@ZXb$$ey#+~Vb~#u-NkQ5w1I&%^I2JGgRAkU7jA*IU7#zv@4y2o<+zgYlKC{d zw#=F@DO+$Ix|qFw(874QQ*e5e)Jpiv2VwGq(CI;l2Yg>E5K_cg=cfKus8x;BY^&I!GL9s9k(=GrcC%85Bg4MTO&Nggcs2huH!nO+;!r7D_g)t|~c& zj(g!%_fLmsBQ?c2z~6i#3JZa~su0bfCJZb}%#EeZeP*3+XE0Agqh3nk)zntMj03p{ zb}eq&6E-5sIqW*+nP9%A{;mBM*0D3n(1CDTXFRZXmQ#qPARoX*GQ#aZ^w@} zZ@za(9_VJkJ%2?g&J{F!P=hF|GR9(27KsIuVN-G1%WkH0gRaSWAifp@xibx}I9bB& z*x|ikrJXv=x9TAs7COIIPfLQ_7WCy>Rygxkc9N?BIccYb*6(b$Vi^Eed&Hi%a*{N0 zaxt{$d$aA;5qQzICKG^$4|KE+h)w{J&jtFi274UpBha*{Yfa)HBAO1WElX$+cy`hb z=&S%bF4G$EXPK8mCEEx6hs*=e?0na|CspQWe*f5IvLvqG=>6XI-Q?L=`=|D)c;)Z2 zpI^6U|6zgFo3;M24TkL%v3xCM!#nu4t|L-MY zA{z7A+3Y{H)Ss<8eQ{>+KRAp3t51GQntEaPyS|VAlD7NqHtXfDz53WzC-`WB`3ct9 zI?*Kg*DDD2`d+{LKIZ)YdOL1@Il8+ijy=}5PuAKdQh14w*&jx|5$3Q(gyNI*=ytIN z90wZ03Fm3kLp*1x=X{@~DK{MRa5DmXGu<+xrPwjTx|C1xR<3?a)}7A{8|Ag)yc$>; z$fNl94Ab%s!+ztkw7<)0ZG`3~ys6i=X7CN;ooW>oq(1GyVM?abSkD>Il)Hx*Ww?IjUp^;b9_Wq}3k6`e5^u2&gHr(R{Dz>}}LDx^W z9|&|2VnEw(@uIq?6&dS%-X2}lDa}~?tRQ9w!=xDvMFM&5#3P>wq5}s&gEmryN-t&D z2EOhvTKJI*hyk&Hua#;Om_bUF1;!*Mu61?qVL}(o>%ZjC=P+E-=0LIns9s*juq8(< z@_+$TJ80$gI^C;YoBWO7ej5!>|F3YZd{$sSU3B6k21zF?GGdkD%8>74f=Kh<1wn^5 z>AuU4-_es5Q-?(~M^a4?fogW6&-ia(O(;v)T#Ti;O=n3Ln|tu1^a3)F`A1b7Yo|z% zzs15#GrUaK>WuqS!4JH6y&D=G9)b0d{4EOt*)LUbAFy$sr;*=*!US=G;>$O49iGIS zNYqv=a1Qnx@i}$O#do_gfIr4 zFca^-x&#tg#R_YQvi{qn;rAW9Ve1Zzb(zlRlAYPcRSbMJUjL9TRIADFc|DRi<_EMo zfPs#q&Rx6Fnj}Z)J(}r)T8O&KppCAcqJS zC2$V*hgTS=5*r-IE4Zgjsx*4d*LhtB*9S`jyqTMz>} z4aANhyPz^1&K`-9JI=@t#RNoeB$LGQ!T+c*t$TRN=$fPM6p4B*21xqQJD-tGsmbPY z5W7q0ejRxh%O1s#aGWKQkc}$Kd?Ps{|HPav{x3Acvz?PD@sLf|p(@MwagVmn)0`X! zvZdzX{QWjV2Bm#n5(4%pc-ilVk3f(eVwIMO`FTmOtz8I$@R{NK_n6o3fCQ%29?QDD z6R_DQ+aCK4Q4gZK8M@mgsI7V^*+YqA`^}9n81Eb&ik)DrT;$iZH0+Ld)h{zprsEb1 zc9x;i7hzU4(>^>T`Jgp42`1Y9>*k?b1H4fZCHvIc0~$J7h>lMT7T6Wc=HDC&rGJ04 zagGZtfiI*af?~=mLwm1~wAj(EbhNi^J4s3g{u7!%gCiZ@haxRfmhAfVQ#t`PaP(Kb24H^`V&gU1lC6*Tb+w-q!=S`&g!zgC5~A|`CIJ70ZT?oENvW2>au7t)y7C&iKSecwo2H%!b+E;R0smh$W^m*yEIGCq8wktK0UKCRV^a}klClu8%ovTsPI84p z8zhSXBNNcetdSCl?=pRk>$- zxn^#4wIpW4W`<@Ko-oBe#buebV5HToI!=&lsM!^0FyoYuyl$`Wqn_|ng zB#qR=o{j{tbpFXe5+B4CBY$l0opIpNWKFZ-cBEuaO^DbDs-G4_)IBHJnM;z-CzeDMZbs ztwcPv9fyTIU+m!`_^Ze<8REj(5tz(tYs}yB>DZ~YIl1c;TL*H}Yafriw zr+wB^V~N|i9>XlxqU~CAQSW+quD(09Uc9;n4`|@Q`MOr=dyK|XD6jA<^I>`ytHAG` zmIUsccSNNTe(szd3}hUz;BAzaq4dd9hkrZx4&?rnI)>gs@5*zouLq}U%A(FXxI!Ew zA=mvEi{<|D;*?WmxMTaL`p^ApVB+fcB1VS;9HL-buzFcue@SXLz)xT(mgS8bbF&rB zqHW{7*LxD0B1Q8l1cTd0Olv^F@)MtF85Scz8(9^N4hvEOAsS`TZNDUJj1HZu)!Fjz zcYP+Ak&~4trb}pGU|L7 z9X`q#nl4u&w`@YL@FY2aH$23g_iC>BrQ(~^^R~MfB1+P}k5{^G2pO&my#~?}6?nE% z-nkRX*HAZZIHZ+z;ZLqbQ^is>7agU2iKxR*9^lEHpT8jJbaG|JTXK$Y?V9p6CW9za zEuWUxYrkj!_X9KJ)X(xJUd41_9t8RvSB>dPagiasskshIpVnPilRG&zU``4&;jvFS z3EjY8lae@&8#Z@KKV8_`v zy(ZA*_W;*1T9%dwRce6&ZT|d4zs?EgtC6vQ6C9myx`4(J^xIw&Fheesx79}kJ}}je zZ}JxSHiF?DEWhMxSU23^8pG}qH5R59ay5q7_5{x<&H)B6Pw?XsuQuU)&Xah?MpeL| z`~PE}c)=@9stujo2zJttnA%@zHO8RdT4~I0;@Ze!GgasbMToLnXABK7Mn{S5gZ@s3A8RvdjY>5TH%H87yQHOH2o? zSC%Yu#ZVvoDIC)nq(spesBN0|pSOVMB$hw8v@C~j;a(9}<&Z^`IJovMqcXzx$8!X` zT*$Sn1l;OSt)LPVzfNSM7Q?SpU=IiX;AhX(tByJ!sbc1T#F2DEd4VifR1F%fUdTbj zu!7fn=^TVTUr)@Tq&4ktbF0$;nd-DX^MjKsHsGx2B(9hU&ufiFr(nPrGAk}jq%1BZYwh?jet6s} zEW8~jA@P|;R0T6r--*J(-p#d(H9mW#v6|~W6bIR;JC4q_girEwm zqjRST*6so~^S5t)6WR-48vdLe^)3@-}MEoF*MjHouC3T(x%=1MG0 ztv)eJ{W4j?gCi78JW-Lq@aULW+sw#5+HP7V&S{kq@$2SNeK`@_%%S~#d4+LlSyEKX&-{|V4%GV^u>P!b z5f>cMlcX3JH+0O7*4G-X_a5&P#04pYOCR+KAoMWK_QJs&`BWI^kaCRoTM}!$s$_QR zUcx6Vv!$j$)9I;?4qtv?(HucJZ+gG-U;&=&^qp*ONbw=7bfhixFyuS7*(}TDm;qMG zyuSw=JQG+bA_t`3U-d(VA+uX9K|DvhVIxEdWkXtYF5x}%kc~WIx+01SMV9}pH$X5ut)>+sY+fdHS*Z!0s`>F>7z zo_dp&IMjizBZK^}w4Ym-y*oR{PvY?qS;T@=0OV${)sdoM8;v!5G}0(T4uIU407l#H z-0TOZP!}iVv*!DDn&e^5tfe4E*OgH4Qm0Uf3!8A{R}e9@UWHYANmE&e)nnLBsDSKt zsz4V5GEGAmE)PN)h<9eIwjq{IIlh{c zV{AW{C(}qRU-MiI?FS191k(zED3d%+r_J~9=&qcAs7CuzhHMS4nGMAoouDS#sWWm! zm$XZ_?l$T3Ki!CTyB8eSjCD0(wDLT8Uf9?K)=3|**;vLFoqbm5%)+HDpMSGt*5^H< zaY-$=4GzV7-cpM9s=eY;P@DbP-yZS)ZH;X1eW$)_Q4*Fw^nrfz>AFgEdkdIyT+C zHzb%SQ+g5&BDng|6MhhIuGJ=hTT2oHavx^#CO}apuSdlt3a6%&Tm}Ay2tnr{Dd2!v zB^^<7G{fHiE=`D*eDZU013U_O-VNSTYQDGSn@pwD87*e6H3=EE!kt~pyC-w!*VGwj zM!h}GHrf_=I131?P5yi*gh^|Y+_~omY|SL(T9s1GY$+~IO#|i@uD;>M+17bA;I!|)Okx_6M9^Nrq%DFjQE_oy7<21jrt`HWg2bX$1bj) zOrC#~UJdINKF*Sk4JOU_94eEl6*ThFbSg<^u#)AiA&a5dF(}bUEjs+kq2PRlmHN2nc63C?K3H9Bs9DN*#6M=EXiu>GD2VV8 zGcTk1^2+{C`faQ*+ED3^tQT-(o5&T1%tHVS+v{1)ynlKB*;We-WnZ8ck0f7qOpSn~{*y=O9e~D}c zJN613F>)HLYUW9E#na-d67BYW+;R#$(5)2Wndb%se!6?a7 zcFX0j*0FcpwEc3gFd(Q$*k{XJKHy^MkSrCMB$t(tTar>7oe=~g1cdl~$^H%D=|2!k zvD+ftH0|%#KR367Di8fb_qb!1V=|NJdMBIauhHjikt{@vI}oO)3E z_UBdT7=!?NY|1vS>M@fm!Tf1i;g!imtw$%b5@_}2tA<O1V`7+awfXXfhruCxsrfsU>IZQtYdm^GT5t|+M2OI3MioBE!-NJQb zg9=abFXs*@t^90t=)lZG$6to`D6MF8I=tT0@u=gZe-~Qc$L2zc|A#!Q76ALyZX(OU z)|=z|-`ALZ#6I%Oh_v*Uy7VY-hT)9}&0~(gSX|V5XgI}@QQ?9I1K4Jwnx2naE-!7~ zDfBHV&k04aHN^BrjyA-s+Tv^3(HxD?W{!$Uaf~po_*?Hz7Ge6A(IICFB}5KhjDJ*n zV&2U97rJ!Y%1QKkhfS9!JIl8&Qd?)Z6T^~!c)yTBj{LP!A0cCestu$DLx07>85La& zM|!p}Wu>{0oYI{X$d$oo+2^8fi-L3+mKfKLi@kO8lKBpq@7j_Auqm#H#(_<7;-c;g z)@X?vb8 zp9l6^_Y(P&g6-%XVra8|C`mU~O)Ntc2MCu91m8*s!_u^_$2~)&pvRV4evZxjgKP>8 zzjYJ99?E$ER9k4r==hH&-L=*eJ-6!d^oa-wK+;h_*t+!KlUzjF!V<%sfcbUUJ!bvc zaj{~jt9ayAUWX$^+&Y%JHAuUWSk!%((F3DIjyS^|o4xLXOJeb{QHAEAk3yN5OE*J3>fp4-%xQ;SiukN8%}oB>!TWYOXIUof<}DC z4-%0;AMZdz+&=V%0r+4$8HZ zdPAf`o-g%=^-wk%CX(~zk-r#Y&KKeop~vxBd;Gw1x#*{H!Ft0Z(wX1fKno0;)@K9E z{%GgRUDZgvAJwF2ll3kjy86@uil)A5gr@QM73RKzQAz6K4*}%_D1Z6`QLMB5pVg!; zba?-a*E-)Xi##D*=?}94-NIHJ*iPh>?(3=?r%&}~8CFKwJn{-GSH7{F>XW+kW`7Ni zdh42$-ug_p)|Hs#h7)_~fDGCk5g(ZBnp6s3&xZeS@0j8Ki#ok@s#!jl=vqFKkf5VTEOPP1g;45e-nql^%h!SWo8V;)sk6 z&j3rmWNGNtdF-0*sc1P+9n5$%*GXv;2p8PWw4t&&?$mYk6&z)au~gt9-A23s4aH-W zgN5C8{m?$p`l44Jac{0|CS(^7H>WCg*4K;S$k4<`OKYr}zQqqKXJcm+&L^fb(eNBl z;DN@cGUl5Okk2PhTh0t&F!IX7_&j(PBW?Av_e}?k<`Xj$9g!oZZzXxk9o_7CGhodq z2~cR$HW~m_ul2NYjHEM+sbu{*!ir>jHGHsJo~l*ouxuzjt0k%S7W@56mgk}E-<)|g zNVF&j1oorx!!e^@0P#V6ZGjz+qCik>szs*Yg4o@P_G@(FBsutE%R$CBOWVxw4vzu+XPD~h|GwW&Hbz;*~tK#aH7_BC0%>(TIa6zIUe=b8)mWexQTH^jiq z_}rW19q*jq0uh`RzyIWhEi88K`&-t^EiZD9+v%={Dt$$i=qZXFxe{;btd6EAND z|1LOw&C-ZR7EOjzqhn(}5GN-Yd}X+t4Ej+Zrz8k^Y~1EFI#~N#$GB^S)UsLnvES6M z@#p)NjjpBdV9G1urX2PUY|#VjP}RWtG_257fp=DNS#0)c^8J}5YfX#timAYH0(gUeW*YJ^Kq^F3gD+^u34Jb^8l>2Ir%GT$`=0U7P=3G>3u8s{Y|4=u9)9H*!^e@^?1?X zztSzy+4k~!a}@bC8kT8(9mAzgHwr0L)mv(9+D?po*SmkokD|)uo&Djdm?9Qa{cLb1 z%U__D<382&t*qCr(|*MJxEXfNJh}1E`XJnMZw#AY7pX^x=M2H(l&2;yN*4y)GNa)M z&lx(p-Sa44; z1Nh)KCmP!vT4L5H&Rt+Vd7Skm_A;sH+jymyIJ*VSb<*Ik5Bg@3!l3VUgfLvxWNG3d z{u|Rbgap0f(D!0H#RKGNQOgRlY-P{|FxC(68%G_Edt7Ff4eSXDaxJ6&5m3jeJcdW;KLc|KXIK0 zE`@Xu78rnekUnAwR&T6Ok=c)(QWWLtz_qOCb*?6S|LocHW$h`SWANgCJwU7jCJbAE zPDHpNPsL~C(&Sr45Zk(9`60S?_@`)gCYlIS)lIvO4fEtwOW8@Z4UNKErPybMFVMV6 zl6yAQpMtz5>0Qfkc*kS?DxE=}`DggmhvTLdH@wsPuwicHmSji?)AMLhu`W6C}xCM`U<7QHgNvK|lnav!%$d6 zow0+0sWPucVhTVhQj;h@gM4T^ud>A%2U&BjJBTY)KD@V(dbpAv9{ZT@3ZKetp?8kK zAHCN2y-6#k*Vf)&F5Z0{FLXIL6uHs0Q{`rwUNV2l2jRqIk`Kp=-EtwhA@Qd*LYbje@HRod> zt+EmHTrJ)J!4ujp4jtV!Kw_c3k_C{KftD)Duc8b#K=IhL^h#Xr{sCX`T2=^VzwG;D z?_!&=Buur;#4hMA7_0+UWS2eX9dXqm@7o{Ek|)2ko`)pV>4|Fb9vp1S+(*r`B%tBU zE2vS#MSa@(Nhd0IyF=-y-RM=ULQ4Wd`On>?VuRr2Dsh3H-wUgv{F3%Qxz}lks`ROM zJ)d9wVfyvsanUSW$U8S?*#EMEwe+n#3%DN+Y{bta>+Jcm zhgg@B0guqi5xU?Q_ypUGdjuR87@#n`xcs^`ojGA-6WUFss>Die#;$YM39>2BkwjgTCPSK0OKfo2J8Vuwu9NrCY)r7vu?pqJ5@)S9i&6RF$6T0l z(*bkE3-i|fl&<-u4O=~X+&5elC~!~D5<`*P3MQ&)hFoPz^nIAF(nVCUJUyn$RMQNG zMTuwi>9S6A;XbuRRN=nq%cz-+OhTBeHviAae6VS!!ZPA0g$pYl}11VE}N8NYt32?Xz z7D0>*`+RcooE{VmgDmaQ1UAcSeVF-C!5y0oMOujGOya@N%AnNEd4K~~1{uX=vU<*p zp@#Q@{3Bv&OLb$Sg<8*JZ!h)=aQVVm8l;09_frQ{DQqbZ0D*EbB2YJciho$(R*9;= zm7|xE!q&e>iHhEDRQLSXn{baGXLGvPE>{6M7w)~3Wq-E79nyu_i!v&{+6GAh?O``B zt>}^esCB)Z3&z;`aUeA1p zFr&3sXTY@-mw|vwu@osiS7J7@XU=+uPnFVUPl~MFw)%c@i6jwloC#FdENGJ2Y`XdI z;LG;gU7tm*3%6@0U_#6NdWtcwb9E)lPOo#P0;shgYSag|Ma;b>N@*+oUOVqYrooF5 zHxD4B_A=y~fVEi^UfK-#A571J&^%)8nDeB;A<~d#*83hTbz-q>2g9fcLyQzs>p7KA z39URhYBG_{1~-Ylo@0UXmbF@FUy9a2bMW{yQz5^5F2-f=y06Xx?P;O^bT5uZ3{5Be zUD_$_2tM8PJg0g}%IO)m<&|wU(+i!9 z;wLfOFS7HgjXz6FHM52F!T+p=ZBbr1#;8rbNYfwP zYp!B3`Q%$hiDgt~QLg;f&?&7v!O|AXdi0rEZ9N)0BXK29w>?ms$_P<^Yp9<5HX$DZ zYm_%8;K70jpvV$7-LTp(qsIo9YbgvJoD)< zlgV3s^h420i}SPlsM&~wK&*9-88fz1%DSPahI*fHH1QtAW78L72-qJO3MS%%^h23} ztO9-LKhI(ew^lui?{e{n9@NhwXa8)2KBH?fu_16ko`rvL!30Rn-#T;^YRl4RFMg8DP`a=8H2YnPwDFVlfDSLRh>Vtw z0k|u{3iX;)%ucMusgiR3cs&goY^bQG>Loo%8;DgSjRs_?lYAEXxUCr2CYx3hBrSL3 z$0B9ZS8GRoNU>qEQzrMxN;MrB;C!M!Eyx=5?3-7L7QH8yPlwRd_Tx0fo_MlnVV41q zM#UY4|4?+I<*J*qK*k8GXW6Mhz%BMZ+p}*_Lnt@0pZtbgY9h$PNwi!S?*|vyE@gaf z6uh5Fyu2T?#>(gd6VbI>ush=cUKmFv?5Ov~jhU)9_`>&3gGf=a(T`j)g;yWV`DZ1A})~F_Hefn8Ln7?g>=F+f~A|un=TD)|uPG9`1+KsHS z42gNGPA~UhjoYVHwCZ-tRC$u!!sc938+wk-KXx?M_e22?@Z4(X`b#F=)Lt5Nf`62% z_LTvBG8U!opYkljVj3b4N@LTIy9)Cq@g)whM>7oP4qA8PmHc9q1S?ST!z+n=H<*na zl9Y;rd_zTc4w3_=GQ_ktUr4JksGgN}R;$18H__0%y#b7suZg1 z0I-rUUaPiyA)&R|55xdaM;po^l9!&IIfWIUQ0D_TneF^A`qD|69d`H=5Ki9siZ`@< z(j-KFl54)@**KvVZtHU`+mPn%>iH^cD5(ZBLmg3k#~c0qQKaJGvEF;Qbk+Cv-3J_` z@TT_K{0`Q!Wh0uQPrIt?^Gxq)u8iYNjSf!gaEsm%h*sk^mjX@cXaiOS;f}XDo&5_m zAsg^4>t~fYmrDMvm}_qnmm|FcsPxHrrZ6F)7$c9uZut^|5bO%=vDs~$(e1>ON|3>T zcB{t6Zn;`U|4$rf9uVhh@jlOhhF?X(MQQSx8N0w!Ys~Kcv*x--E-Rhp^Z7K@m8Lhy z`th~o_qOgy9L-;~I!qV^%lD<#R&Qys|1RpEePzA;3V*1w%+~;tUJyf}BU8s za=h{4?uS})gT104Ug$+6mF0`7Bnns1GUL$MI^tJoaQnF-)H#&pTQ0Kkrd!(zg44-O z+IV+}sK4oc@DY}F61403tYdP{_kb{+SIyNVklP-Q=HngEHyBk4tsd!w&Q~bxzZ3aE z82EUDFwmnt+BF87$|mW&L`8`y>1;oem~OeVpmv$y>k9)t9Goz`?5F%G1``lhXvw4o z>s9jwB`z%>NsT9SwFcUkHEPDBPP#ic_)tl0HAg7bs00e$P zK;YK~2>ddCM`N`ciZsH_(8mxA)(%dtD|#lIZk(C@s(#jZ<#RKWDaPP!JNhBS0LOfJ zjw2=*KKFX@lr7#36aiO0a;|aprzu^QTx{Aeaew>V)s7@Y zq8k_7g!Lrb(kNmnj6quf00H(8u&2)r{CClUiEXMR%7g+{YB+dyF9TQ-L^8F0CCtt^ zh*`xu4~u?wz3Y{aO&#^UagQ%#ZIG9v-F6sqDT~{lr_M*i_oPMM2C87uZr2uaAwy{| zk%w}(blbIF=;1bAx``1WC#rodN)Q}F>s62ciu?nB5;mW84nW@XwH6QEx|`!0>R$V` zw3h3#c458rlW)hYFkT^KafkckEl2SIBlShFP4#dg?-gVjgQbK6kW&SUn*iSv8gq9W zR$8@RHtX_N*z_g?h{|_4C86%Eo*m#prV%Q{UB0Bcn(7zI&@#zbuo2tLdPpH^!dkJ- zzv0kVAwcoPm0oLiJsv?7iSPr@mbpRDgsZvo=VL0;vGK{QkU-V%2vdyWjDI>KsK$RK z0&aFN`V=JYRT=Ji(X!2xiI2O_HH@Uz&$z!KTXZp|Eq)yptt075A3gGa)(lb4PPzFc z_l)OohpHirO=qNVm+R%`*q;kx7&weN*&s0M3?)snO$q~pUlZ)n5c24VF_vgtdS-KL zYN>tttRjl63_&iqZb{b<;ixdm2xri&Mi>CL`p`@AzFn)Ao3_Fu(&vke0ZS}RiZm?z zS@Wq5q1!$rn~5&*oo*62z=P-uue8K8X@)vbE;nObh zK`!Ej=}E1$^4~n!vmRAQs-X!TQ^Fj@4r%>x^Svob)&&vMt~SzcPlllZ1E5%#Y-iyy zC4#{a2RLs_KOrvc$;vh3eVTOs^9?K5)5_oolGVn6I*V;R7nA#?%`j{HD^Khdk34Ml zLI^%(V^lE|lxmb}+KrOo9p?r~`yw_m@UQBUDAe$rktM~SHgQhz@q76N&S$0(`{jm23<@3Y<6psuQ~{R#!WJTl}=yMrN_V6qLR8d&fkF zdlpC>1GnYi@Y1Rge%6mR0uQ}6q8ANr+J^sifhkH4lk;9%8x`cBNKeod8w=g0tbeo- z^MXUc0R}4tRcleru2aN}y(eakJ|G_`46oMlZc1sKsQJ{od$Ry}i7 zyWP^Xq_-l`;f*H%y%(<-Y_*#IE7u(H!{V+ViCmE2m5v=%;6lSt1M9}!+dRb@ZZ ztw*&aVbYa4PV-oEYlir=BK}00;U$2o4+7>MJp5HhxV;tczL9LAy=^s z4LHBdrl;6aOJ;>?1{v zjdHPsSSlFbQ%&xZ+#sv!B^ZSncYTB)p2AU15Csq(1^6RFEm`-6(X^LM^1`qZTf~(~ zxgfdG2VCo5R7g1}|Iitat+U=l7TfGw5?is(EWhU}{IDon$heKP5B~ZMH0ezJr!oN= zPO`WH2BV&|^pR<~uI+JG5*fnC@ix2vC6d1;1D{uD@q9TEynCCDFdzP4>)+_wd+wBA z?F?apM%CtzdiYL3#GX&wa4Q!-KE!5s70jrGKx146N>glh90FgX&#cL@?t?IClcm4U*W*Q=e&y zLp+lBi{}g<5kEUeWP;?By1^J{=-18cTh(oRQC)UBkIGl&rQ^)f5qLF7<*2Ua-_iIq z^-@AP@=NVVrXOnt%~KJ6(Y7Wq8(>QxlMH3$H+!_baiyx&!xH=5&=OJbaEwA_s&)~5js$g;R<9p?! z)nG=5&E-ilBFeS!6?+2WGS_$Ux@D^6EmQtyrIp;)n9qjcSn*RTh?o#3m}J^ip8SOi zfbF1i>($_3eOfatgNCwvq7pS*xcdW>-wvv zi7ZgbbYRP^ez}6zxP;b`XpQ74Q3bj=n_&khA~;2OrEPj8!PmteKFjv8`|a7+Z6gbY z@NiCDy*QzmHi^ifOr7 zasa!BkQWa5;h+?nBhq+1`@92HC#zAqVF_D`I z83k6~3?i#PEpNxE#9FF;T^j z0nd?TTdI-YicArScqhHGEy=T5X_%>8Y!j<3W=O-D9)S3K$j}~Q%LS5C@?F%Hk>6}c zo~hD@f^BPdn>I)UTnC;mR$Sw!2Vums^V=s))B>>9xf*^&_&8gh74S_K`I)J{mi(`x z6D+BL7r?*gazXWokzks(658=?L^3M~12U)~T5?ON^vSG0d&T(a3LqRs68FQ$m$s>S z06;(45%UHi8tw#q`~ed~^c_C#W*~U7ldVPkG}4yeUfj6Ojckk!>*Lq{ktLSLAQa93 z%j4w5n=MT?EO{uK-X(x-b&!-^i*c>=B`(V%cNHqPd8Kz|B8JwWZU&LKS*+Z^y+ zu8f!vz{c{FA;jUgS71y1&%|=~Y_)kbLhNeI=xED`pN7lH1S}w_sXtwEQEfFn06l@! zn*&`}FNuE_&3@YdANlA1H&8&?lEFsw!`gAVSxv*G+3IESGlbI>%5)mfr+W1ABudYQ zNmOBiTR50Nz)BLBj09(H`0Yb>B1S%pzG3u|5NGYVT^;9?nL23#;GL&D=CdbzQC+4O z`M;`naHAfZiJN;k9fiL*_?oc5_%jLdS^Ut30l^QIMzEN z9dXoN=+7;rjE^|!9~JU+U2R}rngB#j#uou9Le7+CZ}C|%4EsmjN%7tVqoG5pYLqz6 z4UO!e64l=i5OZN42S`wb;oB}~bLwwTcgs)-Hj`~_HK}f!Xr2v85IQ>bE5MR+Rlhy= z9A!D3c-_i)W-GL6Zq@Rx=2`|+{Pud0=3|@CG4`b; zzj7K=!vn2ve4tO8ALw+;1GR2@pcm~A^sP*Vad{a3;>hPu`}~X1Q=c>i0O|$85$h_L zbWV0Q_Uw0{#B#b8(g(rkV24nt(e53r$|brgRyUt2aF$q3Tfgjb}Et zV(4J#NbiUU@-OGyd(VHooSQsP=9|gvn>_FA%ziUF-@A2)im20!C_b^sup!>Q>=?MX zHD`RGQVu*5cVHuE<%B}>Xdw`Xcps=l zkj9!v-}@sIQ}sv2M!6EwnHQ)MIw~VDHCoA|K1Xkp`WAonoso@BSqA%|tCM67=@$!R z?h9#4=p)@D=?mIy6o^&GRLjI;C0Z{7m~1f?pNY;?#QwX%=7(%W#iq7AThDieQjS)! zvsZP^FUYR5CIjOmDZb{oAn-xVQyybGdZzBzA)-@?vbeD38z{MQQ5Hnp25}zU#o8NQ zcKeF>aF{e6Sfhq9)VakZx}~R!xPO>-mEqyrbEKY9rhu?WVaF-jT_YNfbYmq zo&MJHdF#Nc*|%fEUB@x{C)c1w3`)bqeUY_j6T+cy&@!lTAvYydd@IVz!Hd|Av_E== z4adll;+YIR4LOo5n^zi?+z@-GUMn5zNiU@T0@YvgL62-zy+*Z?#I9lXt;BTu+JgR0 zmS|Zb(X+VBT`fh!p?@DT)Nz&m}%MG))96DNzi@lQa9FhQLFkY#vnyQRvPosJg z*w5tq(1RY`ujgB{tBCjPmo4 zS>e}5>bU@~*7lk1o#@%u$Z{~Xx2YXIz=C}rqr1=uYd9* z1oa0&lMk0tcZ~3k-e&4VC8kk+B|3&}_b%n8d^h6b_?psa=PmQStC_61@B;Fg?RXDq zw_Ww*(d#l3&M2Te-`|sA`>TjBP2v|gFI8NL+}hF`38e-kN8<;Rdh)7V!{r7Pc~ysw z(cR&U{kJNlOA=VdxMn`n&@n5mUpXsaP|>N`MUwq*Q-$U~X4iGlBpopg?FC0|)Jp%# zJZdF|i8quAyrBWK-X{*_IfA*ypzlkDDm0{v#mp#lXV8?A(HCtkqo-5$cai9arKp;b z0pY75-VWG`w3$rTs}I^IzT#rB+fN&@POG|jY(~aECZ?zYy>&1@q3RYU4YbF!?F3Ww z?IC-<$Se%!sa?%1lMql6r-@IMOfjuS33Cn2?p77K@~zYxx5f`Qez70dPHmfYgU< zc8IZ6lgXCEBE^ScnUf4I1vLa+gw~YGjOV6ud^in&NE(_c`N$36Cv^^m z4_-=8jUbP#qV78>+4TE#7P};IoWNVX`J8ZP+b&GadNmww9k;gyQ3+zI{E?T}l>Ej> zyupg^p$yl1vMniAC+j2Fd&BK7z0W?8MyRFH+@R~uVJ(<&p|j3KShgzXcb|`mH>(a` zY0uo}_{jmru!YDqTTC|q;!{hDA=lYu;L|Xt5jP{T6^f-s#O2KgVk@_n8xiNkc#_>K z_a2CmdhyYVlOaioQYL0wGmus2*4Q|)T&%0d;!tSvg%5!U@PNFnM#P-hm*@y}MI5OT zxgmI-mKUXYNO$f%naMKaGm_@&zpq=kv-(_Q*d%Oncp;Ir96fG=yyg*`bXwW{wDS2! z`>%M)X1}g-8s>4^)&YYR0T>?R3U&khN&=2Wc0_Uu)C$AXC+pXA{n@38-K+=~49_r; zinG}R0aY3O*jecwcl0C&~8?iH_>#LvR?jH%eO z3QAHdN~{}*Ir_L=pBL5ps7J->>i2y_>Y7TicXSpMF3!;!y6+{^UoR|4jkB^I97O*A zY69;aRJjyN3vRTM(O=*B*B(eK>tFK?*a?JCR8nr_jc#@y%w`9u7$_o!*%cq(pgsV zEA&47n1ZC9&wE~+(l!(!&SV1m!_+!$DICLK24>y`K1#QR+EefW_rl|tz4l;*{z3>;w1yuix z*?#UX!hRl9Nx~;v72rPy!vofY!l`1ap0CegjNK`%uPj(TEkz!6lNHhJ24mVF@ha$EEfEJ3g@p@VrX>q|lfDwNS9QZC#w?o9iwi1Ocppu<`9`Hxix2wg zl5o&Po_;tW?C>9jQHZ<1vM@ot4mxquih6My*Pg4UW zaYq)rZ-!JYxsr}7{9zSrA`MnE+2Q9=Q7JdeEeZ$X*ep@OS!~;;TdLFBc+KN^x^-F5 z2)_<&n*`Nua=tWK6y8U`&q=oH*AkQ+D7@Bn$jl5k&;D*Q?QE_vn4``tsIgi(3wv_D zq#oUl&jKA(p{RmA5qgPTW#Qk82()`;@vOD1P}fD)QufLFOoYHUwgb{mqCofWU^oP3 z1>KZ9oDPaO7@Y(){IALy#EnC@D{CIXJYImYL4oHzMt&rSt&~% zEU}HRAbN?X-kspli*{w3DoeJZ@(^SPQ+pX1o`(?f?u5J+3-S9?mC5YgVmBUUGKJ3b z+-ons4Sr*I_w%V9LwJ0Ec%0;E1Qe*pAbZGZ(Y3@Lt6Y%ekx>QeF+5GN3z3ktp?JTB zRr-u9L`3u(=P1%l)so#p9EO-WFdooNJTJ6rmF@hZc&;BR-f)e`=}s?TH!d`(znkb2 z!>{{Qk?k#MU~^jgN|AcA_V%ZTb}Pvnl+SMr~rssaJECpuc=#t~}8XE~z_qL{$rCd&;|A-FxT5PMxwG4BL z*_MMQNor#;ujLoGPrf@}-@83tNmUc&izJYo3$fU_bx)9ug5qZP%Xa?ofhvMA!LSe+ z#egEy_wuDl^DzH|>W=*|)}PS@2e7p;1~u(PPCsk5o@nJQxv}vMy30xwLu~fj1<3=t zzxs6P8U-v%(-H=->>bALb{}4jZF;A&T`|l3Iq-O^#JV&(FJRa3U2$+}fvc&8MmvG$ zfdhk#@x@CE14h!Ar1(vzq~^Iv?8%4`>4m~sU){v_2}9nR2Ic22n!FfJU`>EF3>4iV zW=z;9G7KCd6MkJ@eMfvMBIQP)nQBrqsM8b2jPq;%@ zgTKVd8l_cVz4geehu{R(&xpS!OHAP^hJeJN9~aA#&qy|8pIFd*ZDCF7U#hSgZ0Bwk z>6Vg8z56*4Vl15R6VnLK?>{8?dmFip!b&{w0br2~0BFx@qklKi8)HXfC5jH*9;c29 zF1zP}?f#5bUaX@ijICYj)uCqjC5ld01jDw*;iP1ZlmvUF#*y{0hllOSLl4`bVGSA? zUOqVPLqO9}rOfJ^js2uGw4m1_120oGAIfG|pfuR5L*%K?!pap}*SaHwub=eM?(m`0 zv2ES)!Qz)`(lx(|#}kdWHa3NC5j^iFN>4|=4ibj=kU-BLcP(I{qqTd*`a!00XGwN9o z6edj%V_3sYF_=9*^xC+Zr?}^0nr9!bzJGskVQFjUi;L&uI8xbs{odQe8 zvP?3n>Pn~ZmXjhI7Dan@m};Fl2G`hPWEYE6tB!v@&AY zDUPtzf%VGDmF)Vj0x3Ty7V2IkCEbk;_@)v|k6hyyReQmJJfIu_&7H}moBuhz|K(Te<9Py3 zFqn-b(Y%b(Svw-1Du80oO#`w9smP#CxILKP;R!LKm4KYD~HGe{+E8)m?x59qlrK(*86m z?A7v&=pA2np16W^HQnuLrKy$q2zkGbYEzEO?}laq_6G(ZD^`M0;hS8}{#5dn%jnk$yV;xK~N$om_9?8Yf_r9i*5k&{fRn z{>D>&#Q@zpl<_TBIn7fA7 zMh*aUXN^@3k1Tl~TDpQsqn_!bF@9>ljnc5~N@bWDV6-mVMx#jO?o_J$8G?v8;sfOLtK6o-sT62{ljWmBYXP@rhI| zb+rf_)Rdu`F804;I;`(Vhqj?5?2L11mDpdPWfa^I?&lCrcn1HbrfZZ+MO3AF``Nw; z+mudsnN!crn}t$Bd=l*nx%Q5Vg;umI_Xu-t1>2u{@T#0idzM=PqMoL$ymt`|bIzHQEds#Thw=zGX z^%ymo`0m?ql$+TPrN(@^9_J&`4+HR(wFUKwem{JPh>eB!+%Mb)!Hv)lx#x-nR9%SFp? zjM(6-j2I^Kikr|vk>*MWp`JbAo(ip4&K8|;XqkS;1}VnNXBpb)9o9K_3 zmY0w8%rGIIvUtP_ zz8?RE7)_e1({_i&xoJ>FQ|8OdkR#lmh!MpE@NBZj8$RWsx(s2b+P2&GLGt;TZM0*= zea}ID8Dw=zz7f6NxRm|rmi_7q$5ihRXLb#t>&kFP;!(|`8|jo`N}-lqk1oHO;AAnd zkXN3;eW<49EDoSVV~Z8Ng(>ArLfv07>J=zargB*7W`*qq)F?r`){|jMe%zt2yQX!n zJ=@Xee6TaJBi`$!mUG{KdUs4s&oVGY!cG+M1?Of56^j)(4OKh{BlIsfZE4~5CXN;C zPpCiLG|&P-uMNl!I<@}GX}e=4=YHDDeuuHJH$9o)0DvF~ygz#9>A`=(TxL5HM$H20 zcoq;j(E!H-5&&Sn2>|q`DB$Z)AnyBT0%=$v-E7W6f)|EXPMQJ0=r26r+MhuGLP8s! ziKK1s9b8(wQ*-M0%c}kZsjD0Pth~o%GDzGlBk* z^!EJ5J}d(Okb|83o%Gn_Gm-u`>2zTPQt^`jaDapUc3NfA;r%yJ%5Z^ypb8%Qkx``` z0Ll=*1G)V;6G-qMfPSCW{KfhACdhyPqkm6we(x{8d)|M+B(-E`cv#&q@M^MloMmuA4) zi&L-GhpRlw$N0tjfsvy{A`FR<<2JA7@oIzp@#INsPdD#gy$|3h`X*}0=F;CB(4Uu@ z*im~)O!a%V0Ix3hb-DcN+xhuDepf_G)9aJK@$|(q)RbCJDkXZ$+e-7Cn~ooY8qJ2m z-xPlezig^yFABaa)@g49=*cggP43M%;y?MYZ}a)3#T&>yuFj_~uErlhQE0Pk1^l24 zZ!=sR^Tz9P?0#|X^;&z;(yQ$iw99{~SMjrmj=m zsGc1<)kg$+-3eAtdN;iQn>K3*t7pIOJvIzZf;X2mo*H{Ah7v7#)@b^N1WumJE7D$nIZ%98DXj7YpXK1Q6M& z<)dF1bth83)@*V07YB(u-95(KATQBfBCSXo;1kUOl>j>(Bxua;}qS0)bRKIjmac$f+1 zEqWqWfD#DBp;^+R*|MZrI)#!D8(EzpWwH)Wn{qVYa4Z{DVGoNkmK}n}C{2sfrZKOK zC~QFLcW3_5FtcB)mb^oKjy(}a1Hhk-T+G$s`cFS<$-`9hnm4}( z_-8J*)o~au(e$rHYK_C#j28^8WNRTIFHvROqZ&OAw`y)1FRg<+n`n6m+XHqA6=(U+ztceMUA)lJ4r;u7H`cb8Z22=PCY>I*?Roq=6bakHeco8oCW zGQ8zs;qf@nwO~t|=|pM_-5RN&Xo|D#YDV1rAh=Mdc(!~tdJR?PhE6bwg1Fn|?4%wZ zRCc5+IXg;F3b!gu<%Yf-a(GJpJ<;q6SwyE0(MW8)Dz0w0JsGN`@6rj)Jrr>*fvo9! zxgNd!4H*ylJ=q#n8$HRVAQWq%1l)wj4+s<0kYxs7+Et)tOMz21pV`;-qHPTlWDQbb z4Kkg?aYl*5vjh?`Y&RvyDpvz~{9xy#+6DU^B?+|XesCNw8n0H)X`X49wzgDL`da4L zjj)SI0Hu-C`OlhM*-_#sItd}61Xy*+x^R&tx0 zSv)9*oB%I6N2PCHOeElOoO+H>sNWTkyWDwV4rt|scze1YA1kxHn<7GG2YTIib@v3|J3pPE7fXLkMM!*~S3VH% zNId8w9TC=hIeJ|X1IC>Y2qthS*cYTg`d!S&xJtjTgW81~YMmSvCrnOZ zqf{LBLpyy!QY8lFLw)@b`EMus-CYhJ_S6H3ahuZ^5iPv0UhA+|m4(x8h&(3uR~pVm zZlf933@!rdDZ~e_c?B&bv~W@oj|Y)7Z@~;6C44?7m>Hu`@Q5Hw9K|e==Co{o?N2EF zMPb+%uAl00Z9Zj1$v4}CWW5>FPH+m_dMpkBCX1hHl_wUKUk9IZc#++A0YMZ#DY`+8 zG=DfWGO1`;luOhPsv-@=b4DoD#aKl|jwlKNcM&r5<0~*|*O2%&mPIR_XRT+Lv2Um> z@Eem;!GvvXip}=j1(Q?7jlqSh$K4R>^~1@Q4}%F!m_ZFqK2ZRl?J}Nhv&O!Knyzx9 zXk}=Tce}5Ag|_(Ou!(qhbGe49iy`f}Pcs6OU{B4~qX$)a`RV6tcb1cDA#TB*s$=@p zX^#x6li6@wwA{Jk_eJm7E6Z*l$2sR$@#pinC^Z}?vtZW3VLp{LR&%~S_9j0quAcwQ z2jg6_VYciNiiv3NePWxmQp+nqev_Y>4|Pd(|ys^Yu-a)R~RfhdVc=w<QFr%S6updHKB*n%=#tziaQfU1+JoUt!tQfu(K!KsXoN8ns>X= zcZcU6Ly>o{tvC6rCqqpJU6Vx-DjT@w2p6Fy9I5)buB|+@Oq-f+tQ$!L3q~GNb`+)h zb3@J?Ug5M<`Iv}%Bn^TK1f+R<=bx!BjhZNkBd;Q)%UHNn-aEQ28%%^8Oj?iQ)g6ci zp{`9QziRto9|tUoZdMh0J7&D@IB@a9-(>TD&kw$$qNX=vpYz+|` zI!Tz-3Fmc8McV24Zet`k#*M~?N%RKA2$h3^%Tx#wG67$oR%D-9DB>}Def5JPjT9DQ zO1&;X^UyI1SxH!E`2dmx1`a-!VBe$-B1aGH&;%_G&ehxYP%Eb^U6Z~LKgwSuL1&?3 zf>%^q2wagi(gn$~i*vHZ-bV`>;j)eQ5Iv`&RdEe^{0tYd9+=TWmpoQ@|HI!M=aVi&I;m}- zI?huUPF|6&X94L+_B)KNlGSXAydF$kMaqV@3_W@$nGMJRIq7sq%LXn}1-zogACXUO ze9M7B1$t`zC9uS=x|4PcxO4AKSgIqc#s{WUF)&~j_DQs?m}2HNL~oDQ5Wm<6Qk5f4 zsmwH+f?~%I5vm)gXWuU`x;J~VlCi*K>XuMayBPCw%a2sT4dyfqnSvawV&w1{L8S|^ z;LN=9++y#X8*_Zm9swayI%4A&m<0V*%7auBIucYe7+mq7Xp}X8x2G*It$p}IR}NS- zfHH(h#sUmSE6re?0~_*nZ+7UZH<>{bpZbtHN@p%# z&uPCZyU?eCC)I4g+6GVOCti6R#C$04&<#!(t+%SamK{^u7U81se$girMMra^5mp8i z-9hj{>RSa#_$BDCrg&l(hmb+2jl>Bb=*5Nbtz?EIq@ec)N%Yd8s>e^K%~jLRm)J&A z(MQE>#qdVyo!FDsFDTop#P&aCQLKNM5L&@g|I}a`dF!b7(!a@^A(}k_MLe&H zn3goA^RabN>G|EmTso&4ztG$@0()f%wo&3~2~wq3P?mc1fv5Cmaz3qf5tEqB>D#5xY}ptWhyoavl>pb@e8z1t1~;~zD978x&K*SaT^ z)Ec8#53+UK)XChLyWJ!?NY>{D*R0F9S~|I=gyJaVJwj$39TQOT5G(*u4zb(<~2tDii|cdV@C>=aQ*Nyp6=i71qA%mDusXkZtct5y2yA)EX&_+7;fV)ibxC4 za$F1NR?|#ws*7s@*_vW3dr!78mpgPf#kLwPikH(qHC-~6M`ol)gC&~xv>NKlinY!e(vSVr zM*ghmLZXw^;H3-b)SZ=;Ji@{8Fp%AJ{>u|ejp5V)6`gSb(A&%sDoK(3PMNH($|;3@ z9U2Hc2y5vKD?6(9{A!)^OGAlYZc}mcVoE;!0I6JWipqZ9*Cj z9}d{N_lTkde|5fo2ag&{b0$qa<_JL4w7ymE{BCj)SAi zqp6I(1Z+aAuNyhvKeIukKEJ+qUY8)4xEfYQ#TL83T4{IX!p%o<98#|TeDN(tl6--H zB-?#?hjuqElpqvsJrVl+3S&_9&Vx{Fz<4^i#_i73DMyu7{#HJk8#GJ`Zvu*N6kQn79B@H zI;RR`Gh;A_mNHVcz-62k>EP@b6A5F8ge8LN($jN5BZdA7vT{~$D@df9ME!^k{>kb# z9&>h6;fx(^vb9@CxXS&$=>xeupWG4q%&^4S2J?rIwTLhn$@xgg{j_1%KoK^=vihDr zH|DRDqTTD1^LPAQc?d=v!P=OS8|WrN{k_?gr6{qy23M%_uIi?VZK_A+nPT#eAtbQ~ zr#X~}<)2xUUwF{BzcN`NcK<*mmyt;3if_Y)FX>S&Z~DyI#&i4}NTEMOaGq2)Nlv$M zO@@wS(FAn$@^tO{%Dy!O*4`Za(L-)Q4X?1rTmzR1$c(AKf0xdV+R(qcZYMKrXw)*WM(sEJ*McnoBcK5y4LUY{{5NiF6aV zN)pi{e%iW8AxAvNoW&~d(c{6y-dtobg$9N6m8QEL#)aTPqO8$Hb-4Wlr+#^);HnI# zk^Y)(VU5rM>El%TC1P2r!HGAqnR|+QjbMq*PK3&Vq~lPqQfE(A&X*(2*t3F6@C4lL zt-CAv4c-L#f(fu-scE@!xpGQfJep-ZIY>FxUewvy9NOvjG^F6lNO1A=1Maa@Fd2dc zvX*J=!rWr=g_op zaJQz}CU=N+>T{xNNgc+vU6;A~$Bvtj<2Am>;K$z(9wK6{Gbnr`;EL26*vQG3BIoEp ztW}ikS{ud{rlg;OP8hv*W5J1*GAwMGNuYjq@FjgrDzlqtg9nAW?~MW}#}gyNK%R;m zLpH^gO@i+ux@Mz+?ofw$uN)V(1R9bzN96#F3(x9 zznCzeLB@JxknPeq0Pnz^eyr*n6D!iuXT)%*Cf(i_)cks7CU;3C`PrxXc2eVrnf%18) z{JDR^P4k0A}OVhw;VG1cwVUI)wF64oPL#Ekzm zuN`l|9hy8@tLlba7nd*D`a3;OPVA0WVp3Ze>9z+&EgVf>Da>hRXSd!~bG=%7TS*D3 zu5oJ2&SQM8o(CaZvZ>WKJbRwYpf`tbV#$SgFC^^_lanjbn70QE0m8>;@f{Xt|Da1j+1MGPP@elRLojazdrX+{T%x9qo*UsE z({tzqc^sN) z%HMAx&0x^cb={wgbyrBhjE(bU?5`kC}ARLI(Z(x_80)pvEDuUBz0>!xJ ze;kA|1_04}B$r0m^?65YXaLI{%*J)ggC43eG8KLi$i{9XR!?+-9j8)eQu^w8C!Ft4I)pw6YhLz891+q_CfE#Z}D;w4oDiEqFMSe!@zD{oLW2Fj$D}NM^e+s1r<2( zFeqHyO>vd#b3FaL=OaH8Y!UQ?kS}~Gcux_D_>&W}1idrqGMYxv=bKKbju1<;CZte& zhBb=P>+)Ld>lx*uGGQUbz;tBFeM=)UP^@LFVnIQ@wa^guA-cYOB!6?I7my(v+|*fT zM=1X)AsINg79L71<*mZ^1>=?KXk2G~5-?LEVqGFIt=CKBs|*Xt=-YkE2W`}S3bYsv z%#B+h`FN(I`|8ekw@>23zBw&i3SBN>=tz`>U(iZVKkwT=J1X2Uo zcHBh9!O4y_pXvn9cYSQV6N!rU$lLFsuB_H%v!w(L<2TGKxoKbL}7&A(oqOEr*dDnFj27VXqs*%5u+ekJ{c1I=Q#^rI6XNfIFiLh3IRe_|67&#NHL#dB zSk#S$9Q-~Qjnxgu=2{bMjUK;N|J{Pp2kerA>eV$kSIL~J7_4yl4|cnq?!s{?=ejiD zIns|BqvCW~I=hKvebkZlcl4>~HPNmlUAt&%2tZ)HY14!z3v!JRqU5|Yrt6DaBAh+s zJKM@M$fhGYklu$DxsSVz)oK5L20XhGqe&yhg|7z!G@&=OkTDMo}x# z`TU8jhB}IaOGWlwsQsWVDvwAp7OVYKeD7D&)MI6^(~KG)EFwv8Pg_xqrO~UyV=8Gb zx)}&uA!D4PD)iyYJ7^?Dh1nJyhTT>d<<=qDk|1+^rp+kyK`z0ID8aBDD(J$$NasG+ zSC2O9ag!qL7#dj6j`y`$C4CV@DUim>*wkWJQ^Mv`iwol^qy-Jd^bxm4MmZYur&p;) zXRj*pDRt1S4tBUg+=5{%^FW})83b~V%hGa_rsG5vk96IZ zN%FkPOU@G2Wa=>?3bcSKlq08Fc4iH zD+JVX$JXjZaaa+eQkAMIc(+|v%-VQl>sBx85rQ;Q4P5HinhtSywAFTh>cgdG=LJfSB*C1)xlp+BT09Q?xSmJhHRjT|LGf_796D%nAi?5-+_OrnJxt*cZbFpVK$ z4Pw@SA07WR?xhX?4u9MTw*Q__Ek!&sU*C+d`W*I)pUMcuKC--0EmR}{y=biE3X5Ar z#E}#ZAT5GviR8uZa9efU@p4I9+Nyu}}UeVHdsX&_@;SRW#Ey77D zk??d!x%eP+0^CE^TTcHpVwEW7;h)8$i03mbFg;6BjFZK;3)1cJw9V=E!45QI| zoA}?m`K};9GZ2cg{AyrWa~JNXST_5M_r{pTuGLC?dR;uwy7^W)rN50?11j#ULgGTM zNWGt|x=H#S)90?MovveaDi~imVin`W)Php<%9=-Ep(PG;dxVXP_2=b`IWVXm&4a~y z-d|_#%|}rq)DMc1plglc85y$R6EU^VCOOzN%NH&D(dqNh@jOy z845{Ga+!9HaAUB$Ix(J;fXgE}i7+qRr&LyHVP5TQQLC)GLIE@v%(be|JFB+uv_Ts= zn)uHtm8c@89!7Uyg(})C>?Zh0A}}wi?NF9Oxt!=@=|EfZySYf~c|Zp1IOF^qt`Cf7 zZMaysbudRL2!)L9EP&YXp3FJpvi4D-jEtpCXdaITrD#O>Woq5$z|barj^UfU%Yxoq z(XX2n0q%wlWk&tpcV_ew?M(1avDXtAw44kMb)qC14-y#MXxU>(Age=x11I*7kPUdl zW?MuGZy5G^r4z7vnl(2}_1%A7%jP7I8}An91k+SKm~Ptk@?4rOYgpvdI1L(tET7~c ziMIY-%84$9^JHSzLS`))hEnmtftWJOum;&D1M)O{`uemwZ6BzD1M%RdHD}j%$~ijz z+Qxj6{61-=jf%B!ftoR@;}!++2fB%$fze0?3Zr%N3H-B7#}2n#?Fc?nRnH42@`Z&X><>3l)p{tS+)yR?xZGlr%6)wc?kKCn7hydgLxgg#lcp zBeH0XHB6c?0pS3W+m_%hvXUZi!a)WxQm2Ra+Xeg(alSe&8m`1MuVqNC>2kb}HYB(- zOBSIj=5;;K(@Qzz2PZAy;yJC9eK&`3?v98KS#g~6M6O*D;I+`l zQJPRr;gV8@Mvo$$%gG44N==DrHeM818?*ZOwcCBt2kXu1u7~JfE?K_8em<*smLU#s zErO9kBvE&YlPN5yBygSF-Q9;!s&s)1v`kYktfnrPAFKL`bP(gD$$8h_#5#s=g(fCC zE7421y|x%%i{P~{%%;)I0=}2yEet*>?9oK%CHM(_O((u;MYF+gG|JCE38Zq8K~N^F zlYt@(dTZsudW)~dWwbdnz6l!Jte2}_5hyZph7u2(m>pDbUrUAbSOLc1ISRb$@0!5t zw^4I8ma)u-o5EU_3crcUiW?C|WC!n`bshx`MfG#)dZ1yPlCy(&RTXlE4pI_rNIJGB z+R9USXe}-ORJS{+oRRHtdFF*&<=A7N#smCFJA|snNyi5r>LWKD<0fu{GR+;%1GD3* zOxAY&ZtP?v&dm&N$CA4VM{1JEEz+m^uwibLxV_)BZcg$#Sn6h-xfF{ras zKh*R$PxRd;ScT0id`eP}Lpd$4loPiCwx$Lt4*hB#lT1Jx^nZ3R zrq5e^-ZX;@M<1?0jeU@P?vgNC`)+d&_Xw~7?V(Ys%O%l;FgY775^gJe{v?d|^=ykD zr-`xpY(>fBJ_Vege^_3znBxBZ-9#KWqzczok68KK$p$0|6n@L=^=d1}pq>Afw1phe zw+oa^H;?TPtZAa|iO!Ouu|`{JlhGs1c~|*_CVpCNB+KuInd|jcc~X9Cv2L!CT&gY< zkW>vH29Lr)*wgZd6vMi7&Cc-ergNo4A9v3NaVh-Zhn5^KbVVMq0?F7UWMJpYN$ck| zIy-9S&~0Jy=o5e0aQZMQYc3n@kCC8}BQ$hi^1z(u;@=nOx7g0uBeX(&<;1I$P`dS~ z=EKFH0?y(y{%D_R&!H!GnT3jE_Q1^;lNI=A_9XRDYzG>qcYPVu1gWf~X3GE`U?5;Y z(MPNCkr{Yb-iuy}7M98>i}4H)IrXH9mwLY)I zq#IMe{s`HO>eV7}Sm7RvUF76>->{T;pXsWlgA7fs5d4AKL=JykiA0`_N9OLDmq&y8 zwM9y8ZSQ1}7L<)BZvo#67vD{13QxY4$`0*QY154N2nIA;V2d&0frEOP#TXX7(3OBe zm-L;SrH)lkgpqs*rk06N$ER2ux{Ek&A8A#s!l%+NKYRKGCVQH;$!eEF<-RalY3*vP z?5#rWd2*)>nCMMP=ZLiBGM-IYaKjxF9f2;_PHi~t^TDUyZ+1HOx4=J3=~THzm) zQe4J`aix;TtBddydk#&<4*j&c<&niC)UIPc+n96-{w$~nWiq#HNYHkbNA zOYri=Tua+!T5_$6(NzS;v-o*;5|2I{zl%$QyKQ$;2O?)${HSZi(v&_~=#pmN@xXN# z`m*FIKmWP|3j2o5KdIYDN?q&;!f_yO&`FZjRZS}bs?W@okcf5uWe?6IBe^ss=#$gdwYFJ2Sa|E^*Hq8!gN-AmTPO1@ z(HbWKMVS1>U>_ardwO36fOPu zr^|JkoMt|yZ1@bS?UAo8P5SZSu$8zv#e~GhfbV0)jj)Fn4~YQz9D&Vmj*TE$GTOUo_~niU=qgj*E`natw&@^T6aD;q&y>X)vG|gK*%@ zJGPOMUv3sTk@9r?Iy$_3e(V6}hwi6a1G>7~d7giSk2q}S_jo?emsblajO_G%Blf*N zz%rN;{Q3Rx^ipzqdrLpJqi?9uiOXdt74MY;Apq{lRw@85Y!9iot^MVy+M`u*JKz81 zZl`rR{i;TAb4xeir>C1sR+%S;Ebi1Cy1&4!QS22 z)7^_&jriJHhpm9`Z1F#z?w%&Y4G!OihxR^wyFSg{7VKVEytvy1?)|9FHrV!m$)A^8 zZr!EQ*A4LXx!rk~p1-Q~&)nY4*YG*dj7lpB^I7=%di7&@XSkr>*0V2vymRM|@vD4+jZ6RM`&xs|&45-h zjVlkq=k`vWkxc`AKL5Mt<<}Jg%$wTIN7k-tn^v8r%WB4+pO;S_+ZR;#=R;4Mw!;Ht zL_Obu2i41ry<7Y~-q)v|C#}`l>)Q@B?!7&J9xl&bkJkf7>rbFay*^&gKgu5&kIY_A zqm5c$dmRLyZ?3H$N5a=%*EY}Vy{xZl91a~`yk60$_AW2up7FLO7=b@_s@8MmI?;N0 zVLFrBc%?g&yLjJsa+V8T`e#dazIYuSs1o)B^!n&9P72;$PaD(-Uif!DF)^-m&2_fs zdkE^iUj6L7di{9{7r>JToJaHUX35Q)ctuuF+&z)z;U6ofI`H(<%=>YBf5qA9L1e!* z=}<3lWq<9_`s%jWJI^Kf)AVO+^7S`jHzUEcjyfWBy_IR9SYKAgLj1?_>UF`I8Uefb z3rPO&*B6kn5uEnO^{@y<>W8u$?>eg$uO8RG{`AEs%%8%u#}6Cu+AzQ+%I|=(N=V<> zo4*dqmvFLL+tyrAe0na$-Y@;;+jD&x9>#guSK-eGYwL@Qk#>1lK$!ZNp3|ZBklxj` zALeE;?SfOz{~+-q+Vdlv^=xj{+wN?RWriAxN6zNet zcog*DY&=ltX>u}oE;K8UMqukW&9yqT_F*bjsXAoT?HjPf^g&rV+46p+XhQgC#53Ll)8U2TKhB{B>=2+q5w9-cL@&p}4nJLV){AvMPDh8zeTt&7Ev zJEBCD6#+MABD42d+S~MBm1w{ou>x0jl^EnomiRgz%N*$xEMXWv5urH?K&h9!#}#`! zWJ@^7+yTgPl5kMU#ir?_aL{8v!w{NObkdyQgz~hOSRfa4OhjzgNU^F|V&9e~C#i%Y9fQz9LcbG_-vLwJHf;8rZ$&IeW?9s50%*C*ND8aFKc22e#hQTN# zU}-nc(M>duUt)KhB>d#S!(Lu8GEqt~L&yfO zQ?2ouRg&FtD@>;Ts4sCfy}_oSz;Wrrg5DNWJnwL+up*CCQ+97E8OjomT2n>u5!vBV z#Yj^tpsBQZxni+t2oPKrvQn|zG`B-Vs;sIy+O)NUR9XU1onboLabs12Q{HpJh0Jp7 zRFPz3Dq>1-G=`qI)n1FZI@J61BV@YiOJq)}S504RrXnkpsEd{h>+j=vvY}wYBC__v7prKrI#6&aKFoPX6>^t;5@C_K-99Wy%^0U9fih zC3Z_|`elpaG8dw+TS3oZJ}I-yZCK8)0GpXR-OG6i2MYn>;aP_-T?1cfCLF@-LcLP@ zy6Jj`@sYL`c9S4qO{ZWDrgn!R^UV?Cx^mll3XwEb>ky4D-cha0NrlxI(+>k<*@@1? zmeK%{S_5xqbE_57q(us>qqHE{whDNFTQM;-2=0b|5L{t3%KzAnbLX-G#^Ou%khPL; ztO)1F^e_eA8_UmgcfSJ1_EYo$f41DzVg8%wswl-aMz{8ZhrD8j-#-1-(^v{mRa%^6 zL%eQ(0g)C;JlmYf{w}lgHFmpaj4q!910fk!d}8#-=+NJV4|NCdq0V-L<{$+&@4>@wwZ__HXF0oOiAw}3& zjP{e5oTahb$zya;B^Y4H(nAwv`$sAM6V=h^%!uL)1S%tar}=dzmSXOih?&T5HX~** zy>Q~frnqn`%+w^br=TCOplMu*lDWyfFO8ODC1ans)F zhTyUOs}h7S`n^YHqyW{L(e?f&lOsHd%@k+K3v~dWtKw8Gga4Z_KaZAvnwF4168PK= z_5z%_bCuNoHQNLsHXp?`HDn_B+kb8uFb^tS9y8{t8a>j zfNuwM_O{=w4!@4BXP)5!1KAUk7<^S0o$6l^$MnTW8Nw3wt8SOx^$oT zK>D+C+Z@^Qy}HfLZ}gDZ+I18=T1xlclBhjJSg?T<$I5hgl)_{` ziP?D!yWKQKmqmgBhb%oNQT9Jkjfk?Rv_D5;jL)M_z+y{wgKfbFBzVV~KtXA;KS!z+ zBbxX}w}1N#t#^e}xPMvE>MBKy{@XMa_DyE+2KP*QaLfG|kn3!e2;DDIiQ_Rs`z&Na zKh42O(^*vBzSfEUM=f%DN+M}GPLQgKM3nBY4md%hr7`I36VPG|tnc22{+Z>k7SSkd zDAIJo$~~ofhr~5zTrt;7!e3I2KwO#7cAX?dF+hB4M%feEpY!GJ!_TUvUy*1O1sAn) zPc>wpR6v)jSnUqxXXn*tsyR%7PFu>M>pRbyr(Q9135E!U%l`ln>Yp!Gn-sHfL zX4)-_g2CKW6Nr7APfhdV+i$4m92@wNj(1pnKj~t$)GXk?=w2&o@mgHBZ{L0CU^Rt%@_4;ogza?nX#V zL8AytCdxXYx1&qG-C5*om$&;Y#X6;(MIg?=Dl#~&{H6`$KaB~XU#Xol-}LkQ&d=H? zMdlZenn@79)sgzg{g%nE(g_MPq8I}|>2T2ABG~{3>07VjZ89b>>7V#-4lQYj3%UI+ z;+JF&$EA0VsGY6cBglUZH>Z;MQ|$U(JT(2&s!;d4Sf(QNyOk#CPw~d;O_*i<*1wKP zHsBT7^UUO^@S&EbpGPSS_feUgVX)i5V|3q1Fo2S!2PVq?C#o^u8{=qaR9`Lb)9Z}8LXPisE05mO~210R!@s39U?aX^OCS(D| zlCE_Zs~j_dS6$Y&DM!0q?_u_YGxJ~Ga1Cg?;CczR!CSZO7|#O4eH6LOcSB%uw))XD zyPk>kXJ|<9YL> zsQ(>L3aEX0Gywb`Bh~*W0s;zW?w^u_cZsg_b3dsv$%|BH#?n<1gA&f!8(whZWW~uU zNhkS@#Eo61)e;Z$?w9LzXCC)?S_`(zUszHU8q7_fAvnu%_hS~EepV!?ZL6`@;8ZHA zURd4Sr;p~$H`eqf9p>Z-KSQ*FK~zgsIPjd7FB+`46#K7f2R7o}Z=4c=Iu`q@8d&fj zJC$jobVDY$Nd`brUCy#P?h-zi6}L%F+u=i3_R<{Q#XTC2(C#O&IFJ^8o=5C-uz_TV z&|4&~wCz2KiSR*ZMpE8DVe;!N&;s>` zcJB%KL$km3^8g+&WkM=9C{3-eJ?fYp`)t0;U$wrvsQ~64DUB`D16zD^*1!naO>)}1 z!ls}q0}f100PD0?=+v5<>|S2gMKM?BA=GjYw7Pd7Zik~|0u!~xLMf}4ttO%Exr~DQ z`M~;2ZgQ*gQ{xlw_C4){l*_bCxJsw!=|&TF4R1+_d-!0~aV^u5Qx?JQY4)(W!E(9P zIv_78sfk-%aVh2)M@^QLf}-OLhT;8L`G;r<_D&h-z>S4mAcnK5$0;D1(BhLZ>$_A3 zi8~FcT|)j4^2=F=tRa4H`&2sjQJ{d<)%SnIFhS*!_Dd5&uAdQ|_8zjM6xIQ8$5WG0 zQE^+o5Pk2m7^yNuZ<`_3E!`swsV8et0cER^!7%Kd8g=F7BXGluIjDVeS;-U`dM>yS zc(w|4h6$6ESb)Y#^x#U4Me(}zGEx|c4K?PzqUQw-HX_UsOp7KhX0mS+hZdPw~PyoKB9X2e)2LxIYQU3Z}k<{TYQ%WHKVlB4@6*IT-s5bu# zb#XZGOQYs3T3>gF6=}oAAObjd?iCzi&W{Ax1I#uDx@LS)VMIP zl>ty5N>3FMcU<>Z7l_<%fFYS?E(VQuE~b%TD6lu(T% zGm+=4!b0iw@&@@H{xlK4C{H*wLUe)E(HPPj;dDEZP)*>p9N1bOUT~!Ts(+7sx1p;C zwg_o~sL`uC(?~e<_7|Id)|3D_LQG!$1I0YPE>I?YZ4ePc)+kQBs8AhQIb zq{%^Y5#Sm3Y^EZ^=J*NL&(>vCsDQpm7-Qetk7Dy_stK}ru=Ja+R)gX;&W+#b)KBpjJP2re(n# z_u|ZrqB6(@l#dqu6*UF)#}%Tin(>&vT|F^xL0rbwlgDW;ja1KDIaDirHX6Mze{OO>=A zO{+ROq};1%lT6>@A!*D{|G4ltFp?0$aGG`rO0gxUv{AF@t;o@#-Txo7{GUO~TP85u zdqA4VbS$YpNEUnd-{32MXw0uv_AP1_ixC~E77eo#BQ%MZ>=k`uZG&&%Mw>kP9|%VL zZxfvFX#xvce^H+AX^1ePq`%OQWK|h&m{?K}a;)5MzM>-Qq$f`OUxh97Z?Z*icaArOe#l{O1_98u`yi`u*5#=hY$)gL<#f%8e91%67viDy``O`!-ac`ByZVhywh;;HVG4$mhl_3p?}Lp z-|l|IF97vVWB#wm#aWi<6z~`Lah44S7x|5S$Ue*yh!WeRuZje|CDq8i|H4cL9p3Wd z_hfGw^*dfuiNNoZe@Kcf&il9AnTvw;-R};+QtN+$FcW`f`IBHryyc@2PH)L|A`jw+ zSIkO+VqvlLlf+*Mz;WOtKz#We<@(^S+jtG;5P~ zMYVAcV$WJ3($H#h40WQ0J2n`BgG!TW^l$-gX;lrjPc8eDbj40J5uD7vD#LJA{$T#i zRQZn|pv4*FDVCu%M;lCR#Ti!PbhRHW9HkHQN3}AKa5plZ*jyanp{g2JziO1A?a0D1I^z90-Cb{AxFPv(;t+%Xguxl3O=JT9uBq-3w8A!O2b?l(vL=5hZ&JtY4E zIdkX8zZuM=Ldu__=bz$O((hu9;qRh+X~OTK8u_2%KNPU|O9yWXP--qSks`;2o*n&* zX#Ce%%Rf8c&;J}U7`~;5|KxoCF30)peE-5d;u@MC|9~J%lIXa4ly-otC9m_zN`4ID&Ut%lkGUpwr4eSz0g`VaWHg2RFh7I$Q1K>%Ms-eY{KMFU^?aHr- zndsp`(zWC7+snQC8U|$7o z{}w!u`y3Rf2gOJJT(Q3VqX4##McDQ*Apy|)90K=+#3$}pwV~DOd*OLu(p8i`{g2Kv zstJLcw8t)t_TP-V2_+J?J-=;Y&e;D^4;?we*asPre zzZf@pfA6bGf&}J&3ab1&1Y?!>wpqOC@7F^^ICuEiQHFUEG*Tw8RnRwx^A^YcqL{yX z{7sI7rI$!f#_$*J`SalAjkO5>dGJE9_TPH&a(mUQdGs;G!-pZZapEZ7267pvMqYQi z4bpiN@TL=4o&4CWDZfA;s0X}DWeI~l{n6*f8c+!ayL=9B-doV$dt<-u$EV4{WZQZ%A`4d_@<60XlU;lND0QA0s>)?*f{Oc1+o0VTnKvUZbB$S=|?7PB` zMuX3UU_VgL&FWtJ@?d_@olh3z4-h8o;MFe=zM%VPABWU?n18oBpDnB%(J$B`YB-7z zpzz5KBlx?t6Tbg= zS>x!r;k&Hn;5d#@%ec)41fE@AQW`k$m`09dZ{hp*S zXy*$6?tAVP;!kr9J3WB`!awrXSb^D2d?s+eZ~N)X(}Owvbv-@3)&PHmC>=B9))lZ4 zeyvf^b{y=#1*{;-6YS)Befd`5_|yKj2!Y{?N2SylUiDsj`}4@bS+rz$xO{l;H%|{K zzuU#KhL1V%J4!yorDd@Z3Y zTxWQ0@Q&y@Uf4+|ABh zo%STW1Jv%v{&O(MUW(AJigk*|u6%{#fYxe%AE7io`l+CePSlxozr9epaQPfCuQKui z1*6*vtXI!=%viJSP_-ySXgVa_ z<)`a|p?IwH5d;I-%ZxiH{-i@pEyC7^tyh40QXP4`~3H^pSRGBCxihP;zLVJj?o5$a-b%JC}!22>duTUhte5j*Fknj2BMrluc zJf}J%JsC}E)pNUq$YVo7OF-e`LiG9~;lQa~;BxkCB%s^9hx3c<#U<}@1G6raQ0 zywYI*J0p)U%tr&$*p=!qod!Qc#Pw?z1X)-<57ln2566cfh`FF=^%^d zohm*#doSIW3Fl>Ng#2z5S_Xn z8_@V)Y<+cHQ{mq>B^_fZoufnv>4qT_P>>LVkdQ`78b(eOHzh?%QcyyWW`ML#Ivm|d zIJy}i`JU>O(bml6ZC@viPH~XGR=n0UW*k}b(Q~2E^_vYp?jez5FUCN{e9v?34z0ccL~td zFs6_bA6fiIHBYniEBgz9Uy$bK-^py?^Qc)Bul79dk&%srk6d7?5YM-c_*ZXASzwCg|GbdLr|6bc%qo4^0A8RG-p31?dw9=Xg}XvoWwCt{KMa~7n}F* zvTXhCbTAfsac4@Gv(>N)t*Xt~dML<`)YqhTU?cSlqTdv>EUJt~pT0J^1x}GMu&OEBOsMAa6 z+>;BOzQ6UxVt29~UadPb8>a3$BA;(8p0Jd4+xtbQhre*UyknTq2HSb2sBC(zt!_^_ zSEy2LQ)5%fZHws)IajA5FE4*T^`KgH-4gNqO8x!DVn3b-sSOgApL^v3&E5RXS{IK) z_sT72)|k{!VQ-I{-{5O%r2dpooF(3u%`0qly%sV(dCbB8Ugr8L*F$(N&zEpWGNbII?sXREWDb;e`n$R9y|**$wyV=)*8kYNcd$3Y=CPsuZX-{Ik_I(fVq`tG-qdm7_xK#lS|zjZq?i9R2+Awdyp z!7DP_Jwc~$AfkA?`n%E13B%%BLrSkAud=YipYz<`d!i!1Zf>e)M=R-s95&gLJrqgE zpnq&9xX{$WK0gyvEdF72OSY%y&g09b%T0E)_L+QLQ6&e)AtVDV(O+D376sbkwrTAn zSrfTdGM!xQH6g;1k-HsS8@@*;mLDYr7W%?VIjh(_FWc&z&BxTrE<)X_<_Y^yduaFE zSWGgx$`1VcPseQ~%_s~hbM)ZZx67h3kqtf2s06d;7`VJR`ymTSyd)+klAQVAR)lCV zA2%wu5n|t9HD;=5ieYQ`$b$S8^UTOj+tPvexi5x#nCn&^t>%3hbVW)BYZt#|jmM?2 zZrx};Hr21HBzCjb(vg=dazk#~Wj(8me66FpyZYwt37WD_<>l*^Z+#$P&%<-y^Vymt zR?U62Pug^JyO`KrT!b@J&m8XOJyD(ab>rto`})DMKuAhfa9#Fsk-@vY;<~s}+dFR> zB%j?GdlG&%vxahm|7H$yJHCgH_7;iq6eJZE-$L)LWBp1=piEQrTZr;~MNG}$W4%|; zcsw0j3S(WQKeb$Z!4*6kbjL6@o4c~hsf1tJ#(V#cm9 zX)3%%D!4>nrKR$}#`Voepe&aYJSHLvULTr4Yk?TBI=}d)_z18VHS#pN7nH_Zvv-pBm&w3}5?rjl=b2 zJH)f=>7>BR$OuvLugko9e+a9VSs&qgd&w_OZcuwj;*MuC|y z`u*a7tT*_!0Cm-&h=ma4nYG+KVl`vh9=@aX=l#k@Q7`%)9Er-^Xr7biQ4^l86jY0y zmljn!+?2jl{6PX_x%rkDE2_`w}b| zjaf1Zj{LDS)97Fi*4|DHc8X!}f8EUT%Y*i)p6omc(HxfTA#|kN-7-mgo*B_hJh!E_ zY|eD9CcB;YvN>YT!*MK#<6KLAzvNZ(rJSu-M`;T!%7W);RMV?@j{?%Ik`8mR^Csne zp{Qnl?b%F;+Tt)o;YH~3yL)@KJ!hu@e$vfBPGPZ~uMZBn8`1bVxL9em!{@V35m?ks zhs&8g`BwRRn@bsyHoBiIY=?GokPs~{`PFmj=99f9{`@K8uA2dioC8YH8nBbFf{dOq z#SC?Bb-ks^c4uviiA`-v>IXMrQdnb=soN@+Gd-q7F|`SX0uif3_h78Jrmsm{#)e!f zW8y?`q>*sO*M(OJ>bM$)N_|0o9PRD73_hsL&}^BPV?f}ZLUa0z-{EjlY@0n&q;DhS zHVTrY=4d+maL#qw&z;ZA4-dx8UWVPbV&fO5tV-zZ_u)+UQ>q8<=1(u=TqUD?WNIMn z+w5g&nO0z9x{zhnF2&L-Txm|B^PG5$`qIPn3Y_*}&)bC8k^#jTX?S9=1$I4G%Q+#H z#DyEQO-h6&$wcsNI#r!%z6hX%J%Z)rdG2+mi5C~*Z$n()e_vknENWd*; z&gWj_E`zk}xS!fhIiE_^eO*^!(EJtPHbEJ#bF(yJJ3vZx?Wl9=qfZ`nmX)}T zj)2P3#5}F=f_a%k8&Y0@tsmrz0g|a~p?Ajay$_ThI9GhcgBn8Ow2IX#UmJxr6Y-so zgU!QDMZY8JOW&9$58P^~BGbV(AN3RtDt;@dw7+%ygN{hjfa2w0z`$>>%!mxQ)FjHttzdzP_i@f&5I15DYKsn*tOFs*6{g}h% z+{mop)~*K`ABp(_2qL&H9nQtD(&0Hjo6p9xUVVFS5ql}=`gtJM*kNmrdi_2{cJ#(C zwT#k0osWIXN@KSkC}+vbk2ax9tw?on1|rjKX zhYt~7uEvY~c-w#-hN9aM%;>7PM6z*%<_7}xYmX=n^k!t4%a;QGIF_4;GQW8hy0vC? zu{$WQ-tcFoKCAg+=T&Lw>0bW@e%ioe<|27Z{e074E9_6Z`sp^VdB!T)O1!zJIbdsR zCRhFZC|`cVK>g3=lKfV_U?RiF?}&HJ`fKX$-RijGRD&us_{tSu^VB-MsYn-PZEo>S1NcUxJ^V*ERh4H5PmS{PDTY zMd#MVK2H5&^r*13>0~V}HtcjKUp?f4bojL9u=!}^BrN~pI2jRkc4jqmdaNFL#Q)~t ze97bdtd}7Sev!))Mt=Mom}fJ8E9`vhu=#YyWA@_oEUf9t!CI->#rEvM?uO-ZSjgA) zQnir1L7th@{ngR1vp>V<-Mi;S{jsXQDBfiy;(D1_&J{QgVlcZ z^Zn7S&`|v0#m@Ib_2y&1l5;Fyf{lUoHXeTuYksN}j6bvrJ;i#2;hU{|1<$`1sWXNO z!h?KQHdw+AXFQsYdOb`E`kPNb-mW~zI^FKJI@?_H2t6!%lofU`Ji7156S~{^HTd*= zx7&B_qFwMPYvjOy?LwqF?9Pz^$Hia{_2#L;%CYc+h0@TI&Vt0xr$1)TCg0ZxjtYv+ zh8m9eO5l64L<1#>yL#yTXr#5Y}$KAt6 z$ne3E3Jm4nX%(u$3x)mzMtR`1_bV59kP^6rv$_}mQs6*YoK$A5l%SioS!{OC-M5L^ zuI3Zo0+V;OQonHSUnuka;5;;m>bROfzgjWTks0IV?w=YSCADT0QvtIlk?Imn43l~* z#``GMO*vU?Km!_Cq~LPfm%)cCzNqJ+?n-0X`tLD&X6lZs#s*&N(>L{Z$Gg8oARpWN zNloW6vFkqwwufq^+U9EnT+@A=zxY1NE9ZT#6meZ%ZZPK>b0>3L5$z9)CGHho-cbP| zW)B}OkX0nS%w6!BH=}S`ITo+b`P-*HGiJkPUnt~h7qmaoIg5ERAA&gGWAwDA&)kZY zzUs{+Jo%*UCUnX~A*zIQe&3;sSMe(Nj`mRIn_9JM`;P|Wki$>p2YyVBqv*`=Be+gm zMRGyr8wHLto+`&{X-@g?1NnGM4DPa>%5G@$&v(c9tJTN?^E-MZ=6Ora>7d^zsCSL{ z4zWkor77@OnR{rfoeQ~VO4~!`amM`Su&D+&9}uH_XjBPs@YqoclSEpyrn}eM5D$B* zRmDQ>UDF7-`+Rpwof@w`I^o>L+*n}pR>`@k0ksT=B%B6WNop>{D?U?RacS{dg8pt> zJUt1p_c;~vO_9E;1Pl|MRbMlGB@5Y0%J|c|7BrG#j`)h>@IS z9QI}^b+I51>N|!Rq;Gs2XV*kZ*p5^Y?^LjH&>^Em2IRWyDLvtp_AvC9UOe__+`*-? zsyamiDfY6q4x7YSG~tBq45VA%5Nc9wYrcd@E^j&%3aVU_{n>hVN}<{w1NP@Om94<0 zDJYLkQpULM3t6J&E?{zSCM(>kTWN$Gd+w2&2fRq*VhZyoqcQNJV+(jwlM$rv*9VzD zEf8U1oK-hNBahCpfImj@pNxRbQJskbhFy=F>8|5rPSAAv-65^YawDvhoE$r7G(S%d zmcGF{4y<};nHSQ>!)l?8Nydgy3#643fm!S6k$bsyy$-GH7RWb2Zftz2vmBjTxB4nz z71Nl`hh`FgUmd!2RJGGmAr{F=bg{w1cY{+$Xs`{>m`Wo?XyRSvca)sI#^CDGY6B~kTCwwS)?pgR zJr8tLKzHt~tF56)pi+5T3c%t!JyqfaJ0v@s9y-mG-1Wew6uAv)t1SvO>Aexjsa+Lv z?-@?ge!VL$?`d1IdX7S-g}J7Nk2QQs5aaEeDJDeqGY38~qtrKJ4T5-*6C+ld%-X<{ zO*hBUHhOEBuTq%`^>P)rFyjSS4OlSSmo;R-xKGx%9v`&lR|>xn^aFFdQTg({DRhe3 zm5RQ$DYT3(Ew0YZng1wiwGQbPd)?a+hfeA>pBqXMmXog)>*d!_S?zp)n|R{CQMXXz z)`-MYz_cVx!gw(&ZW*f^A2J;%1V1l9E>x~|&#^6QmmkP={ z4(a5;f|V@@cpz;4bcy77qXnOw`d2||9EsQXvhRS6t^++ivQi#MVZRx_ic6Tol^z~S zPx~lWs2s45%~`>9?;th(`Kw_dkX755IkcE(+RxU5*z@bmM#C>uMkU&!osY5HyHSjZ zQ63%b%IK+vA;bm!Uo=@(i$*5&PQ>i5sNo-oMU-Fi-bNeP1IQ!Q)e(i2mdaTRe{8?W z*s%6T81jg1_MW5it!^PBI>s+G;R^NQ4(_x-y4cYmlfMLx@xR@GxS#G1B3jR%gE-9H z&wQ-QgvBv!T_t+ZDFs=;?rrBl#(LV;>n*wEx(Kw*kj&c;qL~;=Nu_Zu^gTzZNhoA; z?@?ShnY}{$gYQxi0pn)(nbMiS^KSWp$>8z6Tc;*J37A+Hno~x8z9A&OS$)O?VyVB( z^<4`yYTM=v4Gx-M=il9t-+{YSnwDiU*^K6!J6D=MW7bC2a9J3@rXJf&FvS~bL3GwM z0qW_v*1m553s!aLxrC{4eCn}*S>i5suF>p|2GMbkG*7du=BZ(m;*Wl%l!Vb&o)c58 zPxLTZwe{ekJqmQl>&6=@{^lMTebMMB*yrJ>y71cb!bkmeYF`G`z7U4&9+Apd1gs*S z_Y7WtvOiRT(CTMq)IRfOdX(39qJ1c$V~96FA}iM>98#V7zM^VKErcMJqlAz+EKCg} zneQUxZl@o65Djv$wa~U4IX3l`;6{nDbK*&7HA%C<82~JtQ$r*dgn8u*$|VR6=`{vn zztST!)((FxEAfudKL%2yd;@S&HEDiC_!$2Apf7Za{rf>-m1D*q5T7N*1ijr5P5F6C zVqIhROhvZh*y!bXJM-ewT}+Mk$r@5&{2>$nB}|Df_x?y9E<@w7AZ9#9gn!1~BmZE8 z_mu=@9RC@h2`jBq7RbDvZe^Vjl7r@Udl{oAT-rXa$A*Qk#2_Jq<3mr+%)rph+s!Pb zLeQG4HOjv0G@j>hmw5j;b?k%G0Ql~nnFHi2 zCTq*bYdP8`{MY-sB=c_V7yuUKlrqAi=zq>v6UcvA?bd+9l9PBHYP4E}U)7%g=S535 z0Nl4~JLWQIa2>GdeI}W)7VF&OpOV5L;8c`u z-E4^*os{hk;L=;-F(%iM^+cYU$(HLv9|x`a(3#|WddThp3B~ponpYIaPBk*x8XuHK z0B50R`|;_9nLtW+o~-~9S;U>sSQotIYde$(D2hMDuEcdV-CqwZtbk}clF}L__LMBH zHY$%8Y!mmFNOz!To^|O8-$*B{b9`AbqsCx?38A-u9V~Ia^?c=cUuHpDYukBOnRo|2 zXpau*)aKrzDm-L3fc=ii=};2P?LmuQeiynnn~CapAT;W`R?4)ZT+7I24}BWaED0%z z3Vd@7qA$1C*WdIpZwR~ylM`}O4U6?K9qv-cHe)@Pe98Uo@L`Rar*Q3p}LM~ z$#buiYVxo-Tk=|q*EBEUVhacgP%n#I;O?i;prE`8lwZ%}U7dYpLBrU;mVaSXm1!NWtZJLwGQe@VJiAez>IP8VOu_ceV;Cg8UzRB?e!~Wg!Kf; zGJ5XCVmU@~w>$t+2zlBK?Ps%~0ECJ+N_b?ZgY**gagwk!t0Y}5ISJ91B5DJF7fS)qk^b0)^}iq2Bg@yu1MhY$>N7+bPb zsOmkw2|u1rzWmM<&tb&4WA9*VjvPb;RtiJ(DT>&bbGNhq%gCx~L%gB)|U017%615)n& z4;0!UzGo!-WJR0ck5hY(uNkDfrd1mmtbY}7bBJaH<*)gRM}YO( zzd4Mm4-6FYOc(Q9u^Gt+l6OTx0AlGOG(&|PO%vg_{m=}Dc%NnT>Q1`4CG8G9vTvkM zq6}-G;`e)28uemKHbIP(Ut#hzO<12IFsX=fzPo1xzi^k8aF$Z`O3bgZ8qoBO%k?t{ z7<|8sL{eU0xt+Hkv1f&S+UyRdS6$!3Ka0Ckwk@DlU^Pq1-1ei?R@OLsZga=I2;VZ0 zBYh7kbn?7!r

Iu1x$Xb6KkY^vXgxNUG~yNYM#n zB2~v#Z`Y-J-q|i?5#Nh@N#;){HQA&?No@AYI&nWpY`i}gvRhEty_?g{)eqRw+y{(E zfd(jj3=N2pNrXjO;QYK%(HfBJfaFs(=DC+|`(eWOOm(%WP?)!GYiQ+blfF0cFksSP zwzPO z{oEVG&Z}I^3>sz}f-X%;y|F;s%TY{99l1ycO(vx_y1fBN#UyBw`K-wvR@~@zc0jj& z5dd)iWX|kN6i_Gt3Z&S;2RPk{m|+cAakLqMQ_3Y@3R|KJH;OCMR|9l~J5;H5?5lvP z#x=ir--3T!+~y3AUOg1!w`niD&II~@7^TAy%NWk2l`z=XR0i&D;#u0GXn_GXVa>JQO!So6?(vq6R#t{j(KLZyWr zZ^T#|*fe}%>ZLi8gULutVR~uO05Y6v_-Tbh;a&o|yETal(1h2`q3Mlm0LhK_eKB(M z&>DsIoDg7Q!}tQtp&XaA>8FOrtiWsb3WZAy+)~38CV?6dKwUKgrL@dP0~yzzzG*C) zJA0!ob8yQl_irNDjuP+SO*rtF#Ll)YGE8UEmuNUZDk>Q@z2+m?*nf#|GqVpLs5H8? z@;EDB(h4n^rStQlq6i>%EIp1bR*?aXD^k$cD9y#u*C-2;`3YkO7bu^;$B(wr%p)nk zl0!^)-U4Ww!k+z*xe+K8C8VR{Ust=tTZ^Zm;sqe$0GuuEHZGbDGXLe2C|5>+Q@p2j zQOCjnCwD56VSbd2XtmP2u0tBFan?JHKl)m0HaJIw;q$KhDSeZ#GHPA|obtUb7t-nz z0#DiD=RYd@!)1^@*^nhRmH#D>eP4(6J6*1eo`U7jxLRb z2KmO{)l!sqG^OZekH|G9kbEdWZJrD5fOrk-#y;1 z+F73VUaB%M$gMGd9+LW_>}GJPsU9Du3q8qc2VFNAv!EYfDv~!R?-V^?u{jw^tUIY{ zCL&vV8*WnXhbIHX@5m%^x!ke3bN_ugY~NGdO91pN92Gx=Wc(d#eC8D(w&WaHKx^9m zdv{xrCOpk)9@JWxK5rm5)`M38d6-f2g&s2B)~}?j?dltiX`{#t7*MOl1~2H;k>?*5 zgQR-4}YJ?*~Jo&cB(~igylH z=S{a$A_pgZwru5RN6BpVy0%>$+=Qg9-n@BDR|K1XO}DQ>1Vhf8Ukx@^~>sHveF83yyEk0dF$;>i4+eLEufK*=^K06cQ-vu zdUiAlsP_T54!&R=Cz(GcM6dp6jh4j)s|9~u)6KQ+<*mUSvNkQ!d7o!`Zu>XnuCc2| zMU!Ljgn%jg+el~qAMGYOiXw=^cVADlJ4 zMAakD!#{6Vbgb+TpirumVSizBKE=JPW94|@SfIDC_w8;2eMu=DoNIXtWTT7s-vr7z zH=wk2cjW*&7Qx8>6y^%!o0;AfscJ8iGLP#&GJ39A6Ixipc0SR5+0832#D-@PBo_|d z$Ql*Ae>P+u@379xYbkf;)_@$73dGL-Vyf?Za~}D|Nm$}|QXZIl-`^Et)Bf0UUp|8H zDmUvLjm!umKz75YL@~$+&^>?v^4g>H76vC)$TCzD46#{qTXAz49ig|AIhM)<@{B-t zK<5BR;M}$FfbnbtbyM@!GnLi4(igE6J3}GWs7UuuWhbuTjwjv0ke@DQNj`=fB``8A z6yC(?nayuP>$q^SLdNs(+bGQz82Eic4xT_uR=a^WFP;$B-g)=Q{R@KP7PP{U5@-f1 z`l&q!vy|QAq6zB^*}FI0f<84-d~Fia?O|OVB#_z2TsqA$#;xL@8c@J3(5^d>w0Z}| z%N8+s@7Awt<)wB%>9(V&1v$$EeZpWZ=J+hb8&(S2yL*kElmY|JHm?o8UDoYd zQ0xkMl*6y+>+Nx`qvnTwz#UZgkjiyU&+aNcgp`b>@niB%FcsUPEtMy)Q+i=GTGF8lPacQ>=xc)rV8)nX>LsVP!p%i;k1rsBQ#b!J-oDM6>rH@Z_T@3Qf# zW_tJkC>5QG`I1?`yQ)9s-r*)H_e^eM$}gCd(Z6=0CJAJHCnZT+UG~mU5ytF37fICp zNjVX|mPDlQrR;T)W@A*U-=$@4f$Py5*N#QZUx_fDzAOBWetf6FMfrKw9qC-|q!jV$ zLpA1$<<_Sy(-8;xc`c{!Oi+cvd)BhhQAX4GD*BZ1u#0gIt9+dKfa<=}=dsbM843K= zdjotDoNnFr&gdwJA^F;dnwSx(tK>YEfeg*v`&cY}213E6cE* z-tGL;@Uu8CMdy<2=c8McrXrEJu9C0LALK;%VTpCP^#0J3lhLdY{Euh9tJ-?HYwues zhBvugp%mLzGR^;({DH{vo`aKkL4JA~f399h0{rQO5FUm}l*GT=lM-#ZpPAiL?k?Xc z^1&54kU6vK0&<3_Q^mJ^+_#Np5_#}(=f{PalUsRvlTCy z*%?-y9Y3n-JNihI{)Z#-d%C}6@wa@s@M7UoPIr&Wk=twnhPVXZdV!#zoG|`YgtGUvCN@dOvQ^`0{aLU{B z)m*?Y0^Gy67z_RMH@j3iH=4=uPC2kFrUGsG2JUn?TJae}~f&kK@Qzjp&x5 zx|1fzL0<+(*KGQRpJB8+PZ}$0cH|WX%C+tKPrH`QJ07G8D+@1t`|m@9Jp$q==I7$Z zr3`)#UlHp4;@=cx?(*r1MNEgq1`{xYKs7P@a4uDsoUmc6`_ahMx1Ks;xtMD^!b)C? z-?AqZCHv@5e)kPy1$mFtd(zFX-K~;4{CF?M4NFH+oR@dNb~vR5`;EMR0xjuMF;$Fj z)c!9YNIM_t8#}AE=jJrcjd;I?#!N*AKpxp={xrx^{Eq{Mx7~zG%@0x^X&0-?sNXkk zXLQvZSrD+=W6o(*0&jdM|7)JqKws)lhdV1(Zl8u{OENfY29e$$g;f+4p7nX~J+hBU zNhMm9B(qCnD%O@&DNW~E*;+3aUHQNsqfq_q_}Fu%$?e27W?h(K*@#U5*!|~x5MMI$ zkS(eM_*PN>$GNIDJ=s`I>881p3hvX;QWk>g0mFFHEj2EksaZtP)xh4%3x3XY{=SyF zYUV&^>4!(e zlJno*kf1rsFR7G_8H?JdyBK#igQ~Z6^ z$Z%J0soScpvoDBgZB#99@oH~ssW5W2@M3d$)(DnLFeTC~V%NXYlP8UVKUG4bzs2f2 zEn2Ptsb)}>8z&4cbcju+_vBZay;nc=d+SZ=%FHQS{n8y86Ok8pd2uCfIXw-c6h@9W zA<60Q6kQSuV-kW8rHN>gRlwMHpn4FJ&WUrE{|Xr}@O_$x3dR>%Fx;$4Aq8>#{)eJDv|56)l8B@FS)tY}`UzDh^?iFTCZO&b!o z!X7ZSStsqxO+D3{#jYB;kH3HL`Blslny&5!FJTN!_HFhY(eWW?{b$V7%1Hc1{8h^@ zLggg2Xqn!#1?@L({9cDgOo|Fd_xazNdvzXW^84>)QmTXFNKWE$$A9AimXAWPHq*f? zVLqzDR}nGAd`bPi4}I+Dj+~T`H$yaev$L4aIiFbos`r+1=}ByI$tPD;Xq2n-oTdol zxS9UE*y6oRVFy#ejX>-@+SSzcDWm4SFfq74H#$dRifUGJ>K8)o50s4A3Vqx8p9Lrl%nRWCpmeL(oC$d zuU&99eQX#E%20d$;}>BJjF03UHzaJ!+h$cG$NszQjB<@*2`OLRn-AQY*(W$mmGJ6r zovF?NzYI+pCxWvzeXRN;$a|kyirCvG>@E_uYxq=iQ#_P6kDFIZu3%|;QhJma)c6vK zcOsdV7tT{PO6I6EbSyeZs(zS2X;Xd2u)TnGT;9xgJr+~^?(%rxwt$afxN3cM<+f#cn6NbYSpI(-1U)h9P`jKr(k=M}IKH{F^ zCbOw@43N;{j5j$!q=abkwcWiL?2f`rc-yQI+t?+*Er+->uEOpGin_+n&=OnpqY51- z)GO>aIvTgmVO2BXtQMN8Xcib+F?EwsLwrU5?1wgsx0`m!X7-)87D+m_cxcRT6PIVW zJ_p|9#8VS9)emjx1Thc3J0t>18j*bYg7c|Mm=RJ;hhLC`Hl|w*WE=~+o)+Ms*<#gu zTWwPEE7FOo#nudBd4Ra8YzSK;`Ws_RiH#3o_BqZggZj4ubK1V8hm$45Jux`_7^t5R z*9x;#5Hp7iUXU7TyIwY8Q=?@QC8o+-bblv&O_hSQS7>vw0MBHE=Pj?8=3434Aj?Ez zIY7BC&i!wWwcRqV<&4nX$QDC@mJ!QIBv|LWwAG@-Oqoo}JRxEv$NUOm&$*mq1W6^^ zvk-+@8i z>EP9Jm|YNnj+fEeS+4U?+l|liu=GtPtk^9Z8Tb~XlGj$cYW$ZBI}~z-$0?T2>*E=M zmCAkIRrrRIV@icEYq8Chksyl!N^NMiBKG7NLv&oUxhAh=Fz;7x0W-Ne(K+PDn>>`o z$Fx|-kGu|YWWK7xmBWJRadodq-1R#?a7f?#mEA{*RU<~S{dim9zo@^b9-sI_1(I`y zbk$Js@-SCnG-d#K&+n<#;yOZ-wh$>sv`ZK3<-^}h<2V@=l;rt0!^J`Ttszr=;GYP= z0UCynRrDxi`L*&m7So(U3S>OpYT(jAk1r8yjlE{X=b}X}Rj}f>tl)tT8JM5AY6$eR zFMT<1O(XZ0CN1%jv@j6)IM?ZcO$XRwM&H5;JkDvnEHk;P-Nfcs_?LtdU7FP9A3v_T z3lfd6#YI@9spPoWJX_sFEbGyLGcsD?G8*GJ*r>FJ!E}Hd%WwFvsaaA=?RVE+KGSz`7o43i&)cJNOduO+{h9NRMN)PQ}_g#g=(ApSkvTu5${f zGc;Cn^H|GfJcs$Kf!%JHq_VN!$X>$GzAt1#vfFdekDpy-BoYZ_Vr^+uU}ELPCO}ZF z$Fa!Al)=34Rn465((j;53T}tceb{T5E|KuQXuNj-1B`-Pr^iB8vCj#`Ssl!)MZ&8^ z!P~04?@*FJB}oHb=F$CVu!I@fv!?KJ9*(>JM{jx(d0T}_vI484+Qlp;wG+AZZVVpI zI=&cFF8FLBP`}E8U$PTul@ny2p6cEKa>jB<9q>b&vFHZO3D$BGhY9$YrjW&|V7&Is zGwM>!bMAB^1rAMX%05)x;^`Xtfk3*3G7JdG)1Jk8+sjV7^pEFP*yKz*>D2?Wvl&(+iU zGgdzG(<7w7NdCX*5J7w1IctHnF3r_DT=D*$4HJa5Z}t@N$DL#_xsB@Vo3wBO-=_JU z$z;*5>A)$q9SI!?1ttfEHSE`&$UUP6Zxr#`x>4<~q%RZV@n?x_tE9Z}-wfNQhzw^) zWdd?Uj6)^ahALo85sT-=R?N+R)1hnfzXPW8dOyUUv-M+sPa?78KT+I7 z#vGy)z>CAO2Lx)*=6z=gl|j_)AeKqNI{T*HDK%p8b?1oX1!kQnGVlizh%hBLGL)PW zHA0Mekkmo-oFYdMn&V3p+hGckoF&D=HEjgq0*1g;c05Qz(%sdUAFH|a8-^jpvR|@k zd+z#78R9{s1_}Z5pcEN|N;%9R5)c4g89=~av&0;lK$fbwk-N&TuUdW5?{)HcaVY6N2jJz z8A!8}__oh(X%8Z*BO$I>x2?-4?y$Gb;bLhdm5H7mn)4BURF zOk!uzuZ_sYfh|RH#@FF}zk|-uXS3TkgtbV1BKWdv6alm_^2`3Gm@WDrQ|R0;(OQA) zN0I&XmWZDiB8Azf{F9J5YpH8Qr5c~<*nH^*K(*wG!cUpB8AGmI77Xab8(A=b#W*aD zWywm=eW;0^pjE{(7fowXJyaw8_2iCq7S2U*s^GImfBk(H&bX9P$qvDa;qnMC9R1npEhYtj301f)$1krLbAfmh$Fr46RUfEBkdp!?tDb$oQ^q@D|U zA?6S%e?ft;k+DPANXbl~p-t-e5lfM?2B?_`4vD1jjUH5J{S{Q`t1JJQ*SNnyHM=Hx zKQ@V|StHkqE<#r>2}#BPYnF+GHM2*8SxKx~Q{R5A8ah=Tla0#q=g!|Nr-L1Gg7@OD zZi`2@OeqL|{-mQP5l-f9vjHs`G$)xz1p|&A^u7nwRQU7)I8LdB@&_38lp9%LdF!1k z>xYH{)#D5mf#Y7~GD}_S)1Jy1%!2=@WPsgV!+mAurI zs>(+{iiOlhg-0iwYSsEq6pLm~JEw~8Q!0!Hpwtkt`>f-?_*EsGfD3@&FD~y|Kqz+} zBpM{pruDlcmG4>bI>M=5D@QO+qFez&!32EdB49>Q!M}mzWC`QVQ@y#)k>aI=1uLSC zp!@Cbx48`Wyz+rti(vvlg1ot8F!Y!{ItOcS26bXg##hAdMtg)s=sjZ#yUz$-vb^cY}PTN*Z& zM8s6I@qz?;}Z&CiJn@rm{Y&xhaLWPijOklB zvabnHe;3uc3BiWEHrQY#F#s|j4a5%{Z^4qF0Yxetw}B9TO^a}h#$kq}!>Fk;AHzEb z_5YG$@aH>B!5WTtqF(Z1<*2t7O(0+u5WuumWZMEs)s|R1DZr7E3-^!P?}!1iYl4SY zQjP2% z&Sa@-Uq6RnmD_;28Zrq)f!-u(sjVrAn%$khh@i8te;FL|jbhT4a@kFP|Bs9S{E*sp z2wVQP`{k^-l!BJdL@}VO!Up z{8M~~X1~_V9sFT!X#U;A6^a~xcf+Urh_PzH>H&qCTvm5$B5;c`*F(_tf$mzd^HS#ybiA@QSOBp@tBU9 zu_cU7I8g62%OAe2x!-erVerx5oS=>Fuj_%vHv5s7d?z$V9RDBVaBjYMmsp`4-6wn2jFg)bnjqpQbM#5usv4%2Xqv7d@yL ze;iMgmhuh4Og;noB6a8-?MKfVL?;@Zi^a?J@IL?i&~9I5z?`y!_z?k; z^=+X3Luk*n|4}h~l_NWL)Zb?Zp)BQd$Rfjs9JpweQkcYAAA8ge1a)2;8j`l!(Nx`< z07~?@W!YoRO)9CrNN5tAfJ16mE*vP2FhE?lPJKC%|TBgEgwhlmRnD z8YHSEmzqk8D8&Nl0|m(n#m!HME_!XfAALQZ!%hPfEt^_*=5O&eeU#Fa)28p zNDmxPW6Px2`r9V`>B}K`6yq2zF-8EC2+7VdwAZ%*C=29FkTw+#w$-JsBgWso+4!9b zsVG^0F=)(W(obkAM4S}77xY?RN2F9T>g)$nD^C1I20u7OEDs9l>{DHNXRY5;N{n54 zYAs_%C~f}cW${u5&`?0coh|0hdL0=w4Z5SIHsHL~7Piqk&J-iL|2ODO5(RT=0F4=L zv8n>Z+05|ju)%?YGDYpecAi%1iu)g>Es}d z5h1OND>60)!eH0bbwCX~n@AvEqsVls=>J2UgpL3pf{}u1pfB=OmSV&)Jet<&`u`l* z@J4Vxo?FK`Ru3jnL&5*=r0kXq8YoyKJ6a|qT;s_ibuw-AdyX`0PMx0p43vHKVTYso zk>3@1&4qS1-`y+fNM&KAvp2B(C_;a=MG?CaD4_Hy_HPpoHRB#|bhV7uR~MtI0^%nI z<&t_@M26P~@tS!6=mrWmh3Fsu(@_H1Rb*;~GJoq?7ua@n6Cm$&M)#f}EX2>vNvvAl zGpUBgrCi_NjYA0j91xM56xP|#BXQbCEL(lI{0YwHVkJpZ5JVIDK!tzZM!Y-$Udf`! zk++RorXwli()|_xQW2X*t>a_HEO>*==Z3IS;>q?HxytGXDm5}G!8}3(AmAegyu1O3 z+7{cZT5>yp)f#(IUkC-lYM@b26&EiS9RX-GeiuT$(<2w&W17^VatQsKzb1s@r+sCr zzU8q8m1|ZHDjweS8}jB}y^#Ro=r4j-XsAj!#~ySUg*!ht46fbKPrn0tz16R;!1O{jtSSI={hN6y9 ze=DrTL|1L-a}mk22+WwiwU3|g3ki3NI?q#ZK8!@jm)?7o6l+ebvwuJgFfOHnFkI8& zJc{)n`@;8Vvc5|hpj*9x3*oq4GzAh{t-@nZsd5Pq^||21evMqp6^+l&=0>_R09r3V ztqUATy$Uo{!dbaG_KcD`j19eQ(Ef4DVwZs{74aL0WttA42FsDxg^fmrKTriViXB*^ zY<47eF8@#GfOB1V^TME`5-Y}yiIFgm&<_A-9>@s_O~=55vDpMUN0F0o_@9vo;DhN9 zYU%>-c>H@$j&I0T4Rn)ucnh;%NNB$wK%*Lov2w3%^_fgiYM{z1bQsswuGL|%Y280r z03gNN1E;WX%n_F<-W=lDK`NOkLD}K@Gm@phl#TN_`c=@17w%`~Y@FUPsid%SxKn$~ zUyD->9cvOKAdhUjmhl}(z z;2I2^hc3@l7lT&^t}ba0bUu{mhM2;ET73+FOPByWi-|-{*X|pf7tX+p9Itu#j~r$y zVL6BOPpF<6fRL>!An!!SKJxS3OmBLU+f-a3*oL^^;6&Pi%8y+t$RM*tYph>^!kGv7IM&Cbn(c^W}Z(I~S+w z-1J3Pb^WVrUG(m~*ZS?RY5u(L;+~GAD)9}9K{tdckJ4vv#ozlgCtM1x!}6Colx~oY zo|VqkY(qiv{X3INl7X}XOX?ptjgnRDe>Pmz6}!&Yj)y`5Z+Ne-XcTYNbRZcW=ZJBN zuY$pBR**jFmY3coA%FQHdK}EldP>3;7Z24!Z%Qn^&9=fysl#5Vv4M7lb7n1gIKPa3 z3NFGQ>HVOnUTN#ILruGcBY5ilbgjmq^zz3YukWqw4zV|h1gkeAJl$9&V*Gg*b{L#y zSFwT1W$*Zt_nRIVLX{Q<|8x5gC75u8(&9z=^BuF`M{q?~qawIM^+!;VIELJA9#)fL zx68dphN`|xn~4G$JIZ}aysChV$eO~KclAdF?FoOy?=IqW0b!pDz^>$L5ZUC9g}r0q zz`Qi)wzxHPZB^R6enc};Cx^t?& z3xTq#YAYqOHG`9<_WAjY#`9UC3@lv&`F*Xaw`ts#M%C>Zxb8}-2UFFN_=}>+wNL_n zuuR)G9jn<6H)Su$N`>YRd3wv_)LnK;PB_*NjV{dz(?|NaG|A?%SWVdc=KMM}K(%_K zOX8H0{;8f~Jtaw__eD)~LfgJ`Ku7pUuir!w13eU+^5HgzIl0v!PIUPWYzf-!JWq}2 z^R#JFUb0C_%@JyT$rCewiV3OBs4%up5_{hY|2v1lCc9|2grqlYK2AwDr<8eP@f&ym z**%6&(nX$#5*3Uo<3}NyDSG35u%YhhrgPZ(4LgxA=j>xT^v=Pm0v*!SrqG2<(wiQ=lex*kt_Q4FoK7LV7@hxStWNIJs zJrRNhmF{I%ZBavDDT$C%b(a7_SjDdh%oE_e(6H*rW2_5QqDu_`R)P~hReM!MjSRny z>zxBns47P^J6n;&%kXWf6ut^04#_{pKmUn9Vxd^tA!**U@MGz?v{`~5eUQ)3CxIeg z{g`$$%+_@oIp(5~SrtXse0-x;h~$cb(N6K^IJ8p>YfG0?r-f_f7&t0cph@+YD^C2E zg*NOJBiyXOdCpph^|sH`yZ~|f_ZO}i

6})b6!9VIS;UlMT&_tbnnCZ$uUwYVo+U z#2Xj1N1)VCcmk9mUzoai+7uLV4X zEGFkwdm1DN4`$S+iCR>K#1$(`-vl8I@r<#*5Q|^WeWaQYI z3bH>o+V07SnoVV%s+<5apA3t?9*+3ow)2rRS*iLa~5nK+d0vG|GM9IN}IioZ$0L3v9N_jcBc z{kan%KgHQhRC5-UrUn8wM(%_Ooa4)fYc8_LdtoUr_Le3yOeKXfGKq4sPGKC{urg+c zzf$;ImH>I%l_A^ap5R-oLAlmCafYdiskc3 zIG@sj1>TuLUmLGj6GKW;BdIMK2oeb0q!m~dM+ayL&bo)LS|au5YV~V26$v6Yc#YQd zU!T6yrWO%*kH=$>oQ?L2rXKiz{i;ubD%S8<-u)bb6j~#uCW*~AFAR8+1bndh&lLem zx7$yNrpecoDQ4nIjDd-UYbV2(T9qU8bwyl{pJFg4@jz#pB~ySMamKx*%K(*kVeTfN zi_kYrwNVX$wqDnl@^8e}D5lZ0ax&1Z^4q{WH&K1Y6=Gl7uTHv%!8s^=L`J_;-%KO@Ol~(t^~)u}jP5B{-(S`3 zq&F&*i!P87!-Y6$+_mpvYFcM<0Rn~-#ROcBvFE)KOn@t5=V~EG@+@s4gndtppWquI zMeHb{MOh3q_4hG!be>nyAbmI5V=Yj;rQY6>&K)iTm}eqsG$IB3&Ab&}9Q#)PW}~`G_UUaFMeCbp`tZMtkvYJBf7>$DGT+KU3Y-#V<#bi*cQrWb{ z;}31Pkx1C|ZT*{PhNhgX5g+}_xZvEaDcPMUg4J+)!uz5B2n{Jp{OvPG#tCaQ@#}?s z;d%8F85^%cVB3@X;X|1gbBt?-O-D5_DT$Z0d8yt#K)64c+WH1FrJ#4Sv?xm5)P|4y zgFFT^kpcI8ZSt%`k;XvvGXtno*uoRya~2a0g|co;x)0e)O%*8yXxXpQz2Q?s;d>f; zlc{L-U7=wv4J~RyzQ`hQ&k^Q^KM!^B)rM{B{Up?#or5@=o4`1j?#=&Ywke?t7)(M} ztm8VBe5BVe;Jw~)S48bD99nWul%!UO z&kTcadwUybf0Wt{1L3Hya9(~cfF(w+BL|ylCHpo9i3b2 z?{eAqn4Z)tWF%f@Gv`ejtoWn)OSIRAi2jE`hDamGQF7nTOhZSP@Je|~kJI4(9yeQ) zRZ3E5tSvHr8f^I&9Jeq|_hKId$DsXRx`QI~*A}b?Q<}N`5-{?z7ida^-iHadV1o@~>)wM4v1jIGW{Z3vbB0nkR_ARe=4UY!XCk&#kOg40rHniS5xf^|qbQoAp!=RJF5(mbH3j_XfRvnedck z^cE!@wtS_!q>B4O>zf+k|IQvCy$|bI{;XM|zzmmt`(k({6}U?r1II>G`J8Xj7L+-2 z+#Xw!^F=gF3HfU*m~;>C@QQUuhJ;8y1Ig-Eg=8il#m~YF2g)@C zS~JB%Jz9Bpz(dd-i3AzglI%8#n$P^Aja2(0Ug$vSF5#gB1H7<5SKOS2_`BkMSYnX;x5d&mSV(hl@WgH~QU4yBrbc&qa3`!-ZVzpYZW+7uZT< zs>xdRT`EG0e!l8)l6`QhE+`HkOCuESBtCNBajfi(N+eBJCw85tI%W@`89I{-3r-ms zn0@8til=NC|DHoV3gjIdej6f`<#>-o4ql($oFfz6Laj1c=4(6`e%S$9gM^G0{-oL)kiDIx?3EG(7;ywf9k44otym-cd?}mfJd$Rv@z7wNX)9<%>mc`xlM>&lI zCt?qyfuY+Ql9;$V3wFc}_4&+-j#v(#%SSbawz2z1nMYrw_?9Q{#QX&b4X@RwZImu% zn@AeIjH93~6q)Q}v^37r5tHq5X0>~0duEe^%9Eq6O`Ahn_|KZ?NRo7VyBEG3S>ed& z$ARBKOMxT7=DpjLl$?&BERDc0hX--@EkNW4U7r=Lj?v0cSY__hx=?K_QIiVnVxH zW0h0nXiL2J8Qtt6#XYy8Hv5tI+x;=|8to8KvzdJ)y(wi1@#@?y=SG@HD(B^lX5(D zX{UwFo- zESpI4Z>c3{4K%Tw<-19=$~_#yRZu{L(PzUo>h@GsV0oUuHw`if#R8c7v(I z1j0LG9MY`%i~5TcbKwz&>CPn=WPYKVA12Cd&0QFR(@@%fvOAACLHW|Du-g6p-vUSb z{NI1J^;QVjtZ{h5#C-vnvQj#`wIrdVyyW03hCG~=1TkPKj&25swgkdCB*zck>+d?F ziZ)T`W@-92C^7^mZ<FSDU7_s6`H;k-^P>coHw-W@GljdgrdI> zsSch~2*ob!Ws9m!1eizig1!vZ1kf~1x17%mm+@bR|PcWFwb znTy3x5`69-92(rwQ!fHX!bb`FInre+&dG=vyQbjc;;`m|2j~LF*lBVJuaEfg= zoc?$foVPys&nkFed*fM)PtX8$O&^%u{+gRtq$=YA{C z@nh1G;d?dl#br02;zq?Ar7-tU-{FA=4f$7H;H($NgAUqBaNN|l*^Jm#*yJ&MNN`l_ zZ`1^C7*;`Yej4$_dkBV_7IvY~eL#Rn1fr#zL5~t3;U9{p~e z>5buZ0Li*O4Z1!r&*Vp_nbJZ3T8#4V+CEjzCVnOAh+h)0308#3lDLAlbPta4PLHXo zA~E*ivWVxABTXVvNF19xM5N)d&};u8BS$j@tXZy{ir6XG;{to5tsfjcP9!Sjoj9 znOa3w3!CkFsJ7Z_F4n8y!celKuSRv1zA^c$<*@#nmevcQel3?y`2rJusiJY4G+8cV zcGinEI8h0O)Xz8;MJ2@=k@VF$sYYoMmv8tRYdVc_-a2%>Wm~keR-^%&R$v#(C|ig$ z8y%)Zf<{Y!9{+wT|4REB-L%E@FQo51>mV-({dwccNi^C^WnOE-q+Spc!5}i*-vj7# z>WJ9Yw(@YJ%#1rS;Z#O`t7?+lu_15{R;6&CW`k5 ztDyV>QW8|)yV8z?1~4#ux2~@mTS#YK|2y&Gnh0l3tPUtNoaXAG$D6t8qgmyUEus~F zd2;REu<*|Q;>t(ukcsewINnR;6NHswhV^STM64WyWH; z=W4?D_@p1o(9f&Aj-zJT86Sf=bt2!g=Ic6`Zyl zxAKjM_ehTJEgFQswg-~i0+KpxVW`XD6a53|T@;UcT)58j+uf}T((wuStSs)882Qh8 z{0vDMp=^uj9TWCT-n6#g)IDv&lUqGt)L$e#(p*3xnrg zi@!Q0lYL9f)+7lLq-i@wn(PcR=x! zysr(^tqVRi`7poc53$ypal*AUj?w5JfX@4MCZ$H|a|BF~W}0N{U%qGMDHTaMo-f)@ zf%o3;`l((%!_x2xuB%;wke}--dydu7B*q78CEH?p&qiX=E;}E=pdUKOIetHX_YP~{ zuHLlQ_6fGZtymdmIyTmhZu5Ip*vs!(%>h+kWIvkFH@2M-wr&KP?Xmf9b9QrKGVvT>8j_tO4nx9GSMO-5?1H->>61GO$hT&xXy6PhKrEfK#5$UOA{v1Tni{Z15{lXOkH4CKt0TGhh|p5z}Nbj4V? z4LO1mOAnRKB~T&H%dhlk=kYly926sn*GmwL1Weq);Rs?RCI{Qgr^6QgG)1(8@4=Q9 zOS&L9f$!l|ZPHV9*xEe_oq8P~dtK-8>DmI<3TGg<@C5W9tl|8MNGFDDg{Z}<#=KVf zaD_4=7>=ATmhlNQcbwj5ct2FlP2}mOgF!srdh(yoy;>)B42<-*BjhdXWKWnFPWSrm z8Y<6@zCHE^a&cXt76(0$K3rF88dACtkZz@rcO}$!AakpRk24T#1CaN`nAMA@v0M5XrL9L0aA0(BPEFurtR0~5v9r*!9WGo zvN!f?whnl+ZRv4W$2ZGPMnaohD3#tg+#t6mYmYF&Xur5*iaz(vu=YVEBE#k;{w3F= zsbw6jST!Mb?>Q=fKMuU|cdy@Tl7nAKtx!_i+!_07rFlpIAaP^8vV2XOl}OG}cV0=n zZv8?LQl9$FY+aORP~cmxkK!c=wgw3?ejVUc1z%*H|K!zP){pFBG`;R30xi(v!o|Y8 zg{A3fx^1Vlz`t=oD!N_+3&lAnN1p2b!jw=9}(+yR>^4S#76-GH;5@>23vW?|w$W=4}SZgSGr)N#SJ^O6Tx>nw~M zmRT)SH4BZQCb;F}u2O4!-#na-P z)vGx4i12QzZAcOH@f|u7q^L`V#t@Ku9>Efx z#|%rNY@X!qz{>K~ZoUC>Pu0+;vt};ZyI#lufRXBP9(UsB6Ug|guAd75RgLsk%H}5k z&Gh)WW#Q8-$-aoV#$JYgt|q3HGHyYGzG0SAtSG{I6@xXY)6|(+!W^x#_gcHBPhVu% z-OZ5P86Kt>rtKHx%`9ChhGxp9i^=>K60DlvcOnG|^E+EQB;=FS5U;jFGG~PDQ0QCi zxEh0*Ov2BJudL@642fXe&l5IX=XQX!xQ2`aolU2#-@vyQ<)yCzqDGxy4+l9xUBE!p zCOQK^nDs6gj4G(QG9C}JOwvE~)Cz#?{0{Nvy-yaGV@cy1Y~KG7?ABHl*%Dx!RpQ^p zcE?zSBzZlPx*-rty*9W9e?IcnBQgvhKC+X=<=r+pM72{c$^sI-squGN)IR%G_Lq-@ z{PdiN_TYR))LLCSw_l+vBoeq;aEi8mj-0-RK_LE@(#E27S!FKcnU$4lSMMll!-vv^ zChy`F@IiM6eg;`C^g^C)L;XGt*?HC@=p<71BRmcw=J)IQjj)o%T4AtE>gCtJes9hA)H}e(v}^b!vvePx!7W1*3V(ay};B zYR|&&di{sYB2fRnfnR$ww9@t}pH0F6i&Nw!#X@UNPOUukpiElLU- z>M}ig4s~x)NhQfmJEQ+lN8JQt_|b+&TKW?@9}bokaL|ctNZ?DN?F_WwqvwN-DTb03 z9L|UJ?=*#Rz77i^#V7uT0q0(Skgww2Muy)VH&cp@+<)U2GjIeaHI?vC_Q@kf(hEbP zSx4ABQK96e26mgx*WEcoxm_{k2qQ$zd2a7;A;C`S>u-XaD*dVZ+ISr?#3Zs7CJ?A+ zyqDuy48`rTV0{%iZf%m->zX7jVoqCK z#qe!rIUA>5gnc`xJ5=-iN7vF}O4>b)X-UMu<4`gBwzxrrwTc`pL&$Y6lR9Pr?JL~7 zGyd6jNYlMi3P>L7&LIM~Q|K%4%Fc59_QO)9Y3~7KPNu+YqRm5)?}+M5l+&q8bX)Y3$ur`( z*;18{u~0G!L{%^Ua0}I$JocSqM+>SD6sg*G3wmJ)6gm8U9aa^L*c`Yy+#P&KBQ0uUt>QZ zltc9`+^bu>&UOw{DWSCztUY6DC?=Z2#-sXIJd#{nvO3H2xPo9)GSwh24ahve*{7u5 zGxVMLwj*v!CyUnX8Q%8k7ypcCqsm(9yjIYSNo9PF;ft7db{XGuipP38;WgYuq7!~# z1La@u@BZ{iutE^i7SUnkV%ny6Y^59S+yNjFoj=#jMo$iM3fHoPJY12*Lp4o6$}q=C zOMJ6b0kJX9D&W?R#}GQhN(*Zu312|EBR~ON(3hhCOprZBH^TS!Bi0zhw(#bRP_t6+ zX5%pIsX}UEm{fq`ZHYZ`^!*nd0fB%f-ZVMUK~P%{H2ziCeQHi86#R)7sM?R1k^vtT zuSb9Boy;;^GfBHYM7b5}YBJ}-ZV&WtQ;?d;3IPPcF@1M(rhL1zfu!JkELQQP8Qybm=W=+WzTu%J#xX%gPP z=T5BYwha>E%pRKw;5-D-yC(@VwNxj0n%IHl?++4%$}t^V3i*|v??RiCJFf&_i!rf6+&P8=RWXh7;R-%lmQpPssgu97d(+NgzV%O{}D&FLx*Im^t6Ys6(2W;-=eqPF5~X*xps=(pnc~ z1vJX*omC}h^&lz;Yg4fD9lI}W=0${cWP-76tM;%Kf2&^TdDVxIZEh51KeTd*^fcy3 zl$(D%x9?=rY>)bIhYULI0nLuV7Z=Q6S)k^O{N245j@A(r?EJUXHy`W@^{${E14ID} zBusUBW4c4P3TqQ&^del{F`>9d3JiOaZx+$u_EbXX_|v#ZV$+QzLL<|yR%SZ{#4rS*^<9^R?f zfOM)Ol_zRWKk1(QoXS&|Zih0QE~W+Eii{u!!cj2oG$ZhVs1kYEf8u>GOi_05Exp+9 zpcrElJG4S7omni#kZY5-`%D0QsQ!~>dJbxyJ%lewb z5${6Zp;0+ZQ`HN@=Az+lXo|a67m+b+src|pbGw=MsSl^uDkuf=$bZW19nY|II7Vi6 zG>yem7mf4rg(F8LJQIFtZ}p9yknsieBUB^52oOk(BXW?RZYsX@8sB7hsWV6+~tqIL3AP52W=#JB~q_ImM zGX*@@tok+JL#10w7UOTuaFgO>QcJf@cixB~=(5S(nW=$QIB!Dz?CQ%ow)D}=WcUuc zf~dIir*uzQ`Y?XjU{;s(dy-3W+WI)%l3sn4SZxY;zF0$vb?Ig9xS47C%;p5wA6DL_ zNkRwwtH(EtBC@M``7~J3{;A9J8*hugL&l*Zc?ZAH371s)%A#z~`=2BWui)htjpVRL zx?4pOtBvwijgU^ZgdLwhmSO@_HwD1mWE@QU9Jmj%GNdDTxV%cQ$5YBfKe+$wWYln_00s43msROkG$-B;06H`jGY zbQ2Ix-Lva%9{X-om>bI6qbMu1$eo}n0M@H$;tSqzxg^C&t8pGRu&D#~9=t99bA1MK zf&)|jrI#n=vU#O6$S5`Fa7X%QW0z?z3piSVV>Ed6B7!^FIq*=~FS}(Rd5XqLu=*gu zL%pVQCf@9Y`;~zDA_b^^jihy7wi^;I{2jE?7+{JmC=+ z&R?N(s`9_SITvkn4$;8p2Teic)pH7e7>La5fh*RI|6Vc%gz{JY`vdO(fh)^>gT(yW zegF&hT%oOhiB`r4V7%t|!fjVi`N^ zdS&;zE}YO=9ILO9*rO>8BD9)TLnYqF0~4lDxziJC($isAI+whtOAyD{&y<4A-=bY5 z=%a2Yr92T0elaxz1ymd>p4>Rr^~`mJ(0@dKsb%70bJ(UXFWQP)oUi9yM$hID$ld%- zZy%FU11kOXqq3$P+zCu<#fbGiRqfBN?Q?t%#h(i<+~KYMi;#0N^?LvqWni78ag0EE zSHC!kq&;FV*&oaV%16I5c5`^%E==EP` zBl()M5g`K44(j#kB17!)&uC5t?=trv&5>sosAd`m*t)2byP2)2yGUxwlp3)L8IBOYnNSLFC34w^~%QJ6Kta zU|=LCU|_iams*lvQvFA$BK|dJd>;3!J1pPn`Ezd_?91aEAm(T)aENFiI6eu&Qw zV8r*?0ma{TY^&F&6|??OzgG90@7FesRe zn>PLL1Z&s*+qML{-nAK9wsH+}KI;-(95jG)e0_qbRQ`P5Or4uo{MOH@96%uX5gQE! zCa$O8G)jc!^Pi|{o7wn zi(EUOB)Az>5#X_=@>l?ja*5czS&8~G z%nc8ZcHyJvzT6%iUEJ-jU7px5pNxJyjSgP~ME)cG=lg*1$4H`_{3qegsWkue>2GzZ zPTum0Ldm#qAy0FU!}hn=jXtOqwa?x=N(P_JGE0z9x8%=fXg_}kgUit4#G8hIkBSI; zQHvkXeYASLm^64z&PkF`RBOWY;W`Y?L{o=ZQpHb9NnoVe<`9SBR+iQrR34!jcH8B0 zO)-zZNm&`rHHR4)^e#b)m--uQRfKw9PSCrHN0t{J9$pq- zG~s^3Hx~8Qbuk5w?Az%&!f_ei=4&Plc#LgG^eSx~(9JuQ#9q3*+xO<>GzEh@F6S?a#6h;WgKF5|2d z5YeH6{vd8=i@4!H?;1ZJdFJ7w;IN;FSV)6^9c;#LG+hLfP5Lz=BFwo76iFg-4Ufhk z98$~%B7ZxC%RER0oR2v1x{~m590KxGz3F zJ&Fmy93u$r#?H2qKbkOA0a9|HrLOMwhx;?ARV?Nv`F~Cq`3a3(;ZrYC!oNS9?P(d9 zE$8nL=YMThVpGbbHEs9yHm7=R)7FiM)+C@>=)ecM=}$I5#A+_0Ykdt}Bh_l`d=*yv)3h9(WBh|y4B_KuCu=U)We{&QD}e*z|>@}iY} zXqFb`1y_gH6_u|Mg?uCw&A(Mm4NVdfA23Y3x@1ll9bH!GjB~w|?D_ux>pS~FKGeLi&` zMV)bdxA-?_LZ1EW+mgwTc*z!p$b}WRH4!702t%xQ8dA}+_PCD`XxcCaYb*h@Mzs1}}QVdjG92m!DxH&_5(Y1MJ? zLev@Sb{)pU?{g1-^cXHkVvrnQv*1KFEJf;&>z7{vMqV|o3#a$>A^h}Ne@ilJeq9lW zYCq8&0Uh|XzRMeP1mH`>lSV7VIkg)Yden~cbfw3BTLV*tEVn}7rDdBYjSn9#I4?G7 z>>K0gTX?&)=Iz!dL95RHUa4d*WMI%dwbk(`Lo|~;0r_+qq9ZiF4WQYXCB+Kp+O}Iy z3`BRW5IS?5u8W>YV<~d7z$tvgjmk?|ju&yA`{UT9gK(Khi0m@Sj<+X9gdxZ@kj&_#fR3^xeWS)G2+6j;wJ; z9OqYT_`SQyQm;6@dk?`%=L>0{&yWcPtZ9NCBb!XB^&%W%;I~|%pGQ=Uj;O9=LS5MA zNt#){++B;alHOgN&`$St(#pGdM0(%QpQIMs9f}Q#yn9KQ&Q92KWpLwjc>+k~mdauw&rm?Qqs8xcEgSmL9Xn27ORd^*nY8N@+a(4o zSbLwSJBL5uxbe8IoLs^(@z*QIDVwh}h&47&@4emd3Z-P`r;pEw1d6Czgp1bD1rmSp zwCO4_^F?pEk59^ZBCPz8f>leTo~IF&N6p|9okwebv`(jZ~18VLd$UpI@~DF9vZOLxOP;rd>psgzs*{;Zs0F^ z1n&7_;av&D8mWC31^-zG1}-w)kTirE3V%}LZ-$4aXAZlF+TJ={5LzCItTl>>pH8OU zDEYt)seFOPK}NZ!h8A=@rcRnRc~n5w)oLK74_oNXOmy%Ovs=O9yFl#_S~8_ub$iEI z=E8=TYe<)vHrqwvCJq)^^86=)Q()!={$9wel@l695_7Of(uej86`aG&GP#DPIfH4z zbuG_+(!)&LZR?yo$~8|ogMrmFU+4NjS0ODO3PJ8Z@=SFt&ZHUGh)lG4Ny1sAqIBz_ zu-y81ML2eVFTz)7?#Zl{qwMDLe6P7p&W3k5Z$3YEDinStH16j+7NA2PeJ<1p#FaxrsALJ4)nFo3V2UrYB2%4#%$mTCasxQyhWf@gz_aYNUE}Va^O?-@ zyn@L#Rp5P>c<^W0{;lQZBCJqMSU^2g8R8wwlO=u+DI;Io`eCeWrFjhJe33dtc;iU7 z!;#1TYcPhe!ZOfiFMRRi`q>{)s3x!dqr7_YuEko$-DJ?5qE~_zx`0~0JYkZ-yc{*x&-;#O`9lT^2BxXV9?G?l&lYVeZ=@;SH9-1W z1Hj0{HyW7}GuMQULg;CxmYepk zy_cVcLGaS3u+M^Fgsk~SNNL^3Mr@>aXNPO zGi97vyx~~~@mCQ~NJukfS!VLkwpMoLbiuH}l(V3ef4?gBxXZ)UdPzZvi-JmlUl_?; z6!oJXeXuIQGW&efz04(dPr1STpNLk!Wkdub2APW~A=D&@OXYAubdK^xP<-O(FG!bT@);7y0n);4(kIO=#9~kuQc@j-*TA54DNPDzPxBII*E&H6ib!{e;_2 zv%D;h{7L)(2La|RWZIry(hD-2M*Q2CkPIO3TyIG;b2MF#YG;!tapy7o;a>7bd)M$p zg#gzFQ_3~IE)+(QM#gvpCpj-=@!bBg<~ANyLk-Kb^v{PEpcV5Qo_0Do^+LzWMR{hs zCw0J*7wQO^r4yk^{(>Hbt6Gitqe+5d#WIe+*23qif{RsyHPorb1kTS+>$napCW%MI z-P!bq-P1rD8g1<82@wqS%6noGCrj+r07aM{f0**w91H^*sD z3c|~mKC&b|2DNMV3f}7{nTM)cboos@u1E<$t2+=k_&xRxN&jggMLk0t>-@tQ^11g?v$ z{nD*OtP7+-5NJ1yd=?y7pD~qddanIq7Z%7xk?2dF8^g%CQ}~jh3BlRRzli;R%poo2<&@lE1A)_OMt2gg&q*+@m-MvFaHd=++ z&WRS8P+Z#J>7}o)hx7;0VexIMXO-bGr!0JG1npw4D5z!~t=STxhe}Ui!OL=L(XAL| zfk{4j5d`-(va~A~?eA`EpE>~c$0*MlqNiKqEP7b+oQ&Aj%3d^~R4{pH8+inG4YG~M znBo2$RcE!WEku*%4ERB%vXLW5dg|bLy(V(~@a?4>OpCTL}jXh1^OJVV+54y-^&z+`R$<;&lkx^%974^`}Zq*e-{ zu{+J}g4Qb@9AUavi<+75t-Ihi9Y$Xx}|9b~pQALF~WqxyQn>RG7Z^sIrX^%@C3kOEgef|YZi~B}+#Ko1OQ-YKt#2M;3@)=@W)Oulyp_-6{X}IRliIV6cEgWp%(B@f!^-MLm7`!dJ z@0f5a8raf()u~|GYHgj-R{oheNm}+eN5n&!^lQevt>K9QV>ZH&Y}`0x4LGk+i>0WE zOwEs|non~dKF$v2T#oPuJ63+S0PTo#-k2AgFrQ(S<4FFQi(nfxh*T*L>`omt-OC@> zf8jH=sDq|@cJ>?6m-5Rz0uFt>y|n#3Qpg&5+5YVp6mt*d=`f{-Md=8JkU|cnRQh)n zR`klvkR8@B$To2k@_Y!BmkUNG$fJqZVmIrposVg#^k~XmX&n}mLjD#K%h&V@W3o`{ zJ>^X!iCIA>l~kBMs;!yl_>rd+FYsm!aohS>U=9{+7gj!e5z6~^>XdJkFwrqUtn6VI zS2pm zC@u5XxchfczVG_@7r^jz^axE=NW-Z;PX@$N+K*LocUC$F;5v{mWoV#5uHOm3Cxd3wlP$$)Jklt?E0Z&Nf9o=JHT!c zafJb|9?u$*SmO{U@KTS_fX4x2gg(^527@dHwAVWMqPH7%xjSz{D-tljF}B1AeGJ) zRii5t0xG}j?3T;3SM>H+hjOrJ9&lmX)|4wM*tS}Q)P+$RbJtQ411Ke7ZAgF-PIE%q z3Te$h$zOz#rf!Kgkm~u!$V4=b&0Tc_tW{n!1klhh#2AvuACgzt*%s@MHoeHN2*zlp z{&fDaWFy*TO>hdoc={oN%}FC?)&4nA@s1XkGfhRWJ04BWwa$`1Y(ZZ<~@v&$g7e*S&P!_ zki|NEqgxt`)(RK_X#X$HEN-y0iApl5Cy=HHgT09thcs=8^T+Q&R(tawyD_;)%jCqt z=f%r;T_khrKEKsq>WJ82`hszROz@V{VmLkydC1OuJ6_Fs&{;1({QKw{EC`XBvVdzs zoE`R$dplQMw~8@SJbAU2=xB}A63*lnj(fy@s5OJ=VNAAs4nNkl*UGwQRq>!jv?EVK z=rB{#FO48U@T^2ji>f4#M8M2I>lQm#sgM;xa#akgOy+PS9B5QpxnBfkFArF6dUQsp(v3$~RNqEC`ENR1*=HhzPbGSKlNs_~Ywf z8=9k0G;>oB`L{J+*O3-r7U|jFyueJziDVd*#~q(ZtJ5 zwUUcDKcgjbx0YTCRSLA)dfQ@ z-*$<6QAQKqsu6TwsP9ZcscSkfNs9oY0VTQAgl5}d*7Dw_#GBc0hksYrQZH7UH(rIf zXq(k^RG8M_nX#pqT$r=QgF(O|0(TZ@V$eIT1NsIf!1z%$tEgj0b+geP1;}X!-xIX$ zA#U6;8?`_mg~3&kO$mL@D~})(C2qxjl4mb$+S>;5zs$CshCrOg)CU=ftpxGfS9m5j zQe{QF78AYF&10H1kHPb?EKD3Lv7tIaXUj3?!iHG+Yi&3%b{CIi>53~MAqASZuz>6x z_zaO?m9@6LX}&Nycw=!YFIxw?9|#)6J>89%f{U7xcX!$n;;@#ha`ZEF;4MU!!@qwX z*B&wdE-9`u;}R|RkD#TMmERS3&t7a37N*-}4{gP*vWDz7C{%ApE^AcCD}fZ8C+@EA0t>Dt^;JTj*@>h=9TTwL%w@c^c#4J5o2qn~2?|!MpaD zKlVe{Q`*@&0&n`KJVIM98O2<;q_|+jVj-e3S8>p|ie#G;X-B`9A=j&s zMljJPssVUK;ovrW@0AXr9W|P(prDT7LhaMi&L3a%V>VB)1bhZ$%i>AEdD&L^hsh6v z8GB-%6eNo#R~oc#xJ}x7bOw)ZxTWt`^wRI%SM;(_r25Se#Rl`nsF@!Nw=W|B)`v7g zr8^A3bLnc&20;6D3+Dyns+LpWpRs*;;ZtIXKZGxtq{a+(!7A+o$iCL*{A@!KktHN> z^;g##gm1kYF;&wiF(}S^$qHsenQzr($__qgZt~lnus3y_W33v}<2OfWAd2+YZ*@h@ znmm;G+V*_;9+5dHUjg>)j5X8u#l6#3V#MF}P}be~0q@V`wA*2jMHKkGC8JY~SAWb& z2SF<(Mh8pu*Xu@gKUk`!p%6*xwsna3u$oZ$6+2Mtb*MxN`201wt#uYL%pv>u3~mv} z{RZNZ&~)-)F4nl27hIkLM6*t9sNwwJZroQL@5+Q2s7g5Sjb1%b6j?;`Xv^} zL$zGZz4cY@2k%9Xdk6fSA%$z@E7Z;$%z&;sd7I9OF1RTIvDy*x6Nsu3xO!0UVJ#`! z^SjsmI8=rxC2)PQ}I=ze0*9vq0=wdnvoLN2pm}=YTr)3OB+%%>{y85WeB5L z4i+f<46ESxefD>&734|Cg}EC`>BSAeNi|H2!jlKpPCsiyj&de5G%gnm>SN#LMe1ox4 z36W;+49enYj#a&)GPpUWBHcytF}UzgQi}<9+_ey@YD$(HNu9?Dxbac7IJYL^$=3xq z8k>1&oW!hO^VK7lQNi`ZEvl$1T0s}Byeg#Ii@(olFs6QknyDIFtR=}1vK^i*sMDdd z!NGPU9>}b*E#q1s@L#;%yI47#9GwljD&8bJ>fr$9&NmPF8VVMeC>T&C7Jp;(?(mf6 zN60sye$;3zDey}yH^!rGp7{E#RjvNCIsky4&7e3Z*`rih`^uP5VoFoUXnDCqCZ!+j9v@lRW^hFwac8eG zRM#6TzSeh=yOupGWa@YhJ#?P6C(VBuMeMp$x*idWJ}$luIuyikwLGJ0(bAgYbLc$j zIwksW!&}I;5JHW^SaZi)`K1_$|K)e?Ge ziM`e)?mLuxF0pzG2jFyjt_5l!^+!Ja&eGXY(Ddgi-d>F$>ldY>hlHuGz#Zo5?MaVocPiyb)tGHICX`U^V3i-C4$M)9m>Q)0Zeji3GH)G;d){to(?s!aHU1U9g4qi-2gr?~% z=Z3MIfdEl<9JANx#&`*DDUl@YKM#NrQKJc@Y$Y@u%D?g60%nBdC znYV(P7>&KbBTs%ldI|#2&IubG417#MSUgfAJjBPCQjPK1Es9sExr5>d8$Nffw^0j_ zwKHUq$FtbO+$|QIb`a=9I6$0MnK%x;!ZQ23kz)jyeB{`3M@<*W6uak8UMtzUmxXF@ z*i@T6&g`@Wzq$Hm`?7iQSZe&{U^2Fclw&aUt%cu{MH=}#Vf1R(3ko9jphS~0|K3tV z-_l}yC3h{^9M1DN#NQFuPWa2!k8x8jE^BY1)f*X5Wra^zKCn0MxGD-utb2BYEV)?A z19g0eU|$)wVrBc7d+dyGu-KStaAaD!7Q%S!#=m#X$ce;<^Wa+(L*Ig>Emr}`X_PbD zbPPUs!u1Tf?WTjJ`{Nz1X+==43p|iw_3GzL{;hP)Cujjk27UPo>(FB#*?Ml*=bcA- zcm~<^&T_M$cOE&RRRSXY1?cl(*|<6JinkOT%ZBAZdE5EAuPDy9owIQ3h%}4YX*@O4 zY4B#}O}&_0Cr&wc08WVp=n2)M<&ndAJA}2WOzQp1(BV9+>WWqL{pFU?9K5S91!Ax9 zb7i|}6Z9YAXD5%QEJEuBqHMw0Is?6J;O0^dSyLdv=*_0b=?f2q>F_QQYhdGl=p8%= z^R19YxeZ$RpLaNpWybRI`QK@~h`pN0E0aKD{y?e`g79CrMAp4Bn?YT$KC^)D>Ij&AZ$76fJkV_)L|7gKjL8WoG;VJy5CFem6n1-z6pCM ziX+J0)6i@4K?|Bu4x|O{X!$(m!UHff8MC9UK2;qBx?i?i)02&1U#>Fk(rJu=< z3Yp6p(I=&rLJBvZ3b&?)8QB-W=M>lVZg7__9Q2usLi+4Y9SEX91m8$Dv-%vUW114O zAUx)1U5|h>aQ=#aXWlvC($G56ceuG?nDU+ScuVuVxTo~Q6;3Fh(legvr`tZdz~w98 z5gM}f4u-0^kZJrTz$TFJ$WtcbJ1m^UILw%I<^D@q-PvT2FnN-EI8JC%vMq=CEA)uN z(;z9&+dv!cok0R;;w`++%npiJqLQjeId!b5zE1(}BY?|KhzG_|_2}qJRcRsDam{&s_qx94rhCEGo(m8*#6<6y{ES*4!`W92@SjK?uZIWo?LcURlLZR5{p&hs$ma7vqm8_d64JZ z=6L`7uCUR}@??oH`EPd?UZn9hUQ5#;xhM@H3oQ7lG1-?|&If(4Z}@&h#>FjCP%LQN z$K6e5TbkUWMGtH}VDZNT2oT49%a%&Sn|Xsq#iB}y!aG)(yF4UUJq9o|jje-EmBiH2 z5a)PmyYj^5OCLWV5lC83pg_abip)ZE-KBnPOcv#@NPHJ3Nv}MT;%;+6JM+?ZWXQtc z7^@cJ-;koRb&nteOwq^KuXuj^EfPI0rVUCl!;a1}i8Sl4~ITM;&C{DvQ|lCGDQr z+Hwbh%yV#AZi-N!I?SgE+0+cWyaZWMxCXBL)6sY8YhzywYR~=-2)UO)A-U`ixF>-% zlnjn-T&3E*GeeRmp@Tg}(@YQ1jDWDH=ZJ)foxS zlwGZ(TZpqS^O0IL!LF$pCPIH)6$PVz#ZjJ*m_|e?S%F(Btg#w{vX~DMo=vl~h4%Z( zDR297=cWtK-$)Ow_3dz19x08c#kQJzbPZ*R1r*=Xc;c-5_e^ZlA<1rFm4Qvx12 zd>R83Dh2)SZ{v^kgn9|bw1VT5+mMq%e#V4!GUr|#d0aC6(L((G<5fzz{4HAJSMrLM zKyUz`4twuCj1O0E!2}CYbolB1viW&1zWTvBPP@=!xmW8mJJOdFRsNu_h$6@Jq*=x zVN%oORkx6+?Tw9aFsRy4-03Y}V=3QjaI1Vk?@Ju$)BKU|JxAu%hxqHBzs{zj-a0=X zD-O_EVe!1n;1PK4|QU6@d|+qHVfzzA+|}0WP~RIVK%>) zKxM}pi5n9xS_n__84%FJiA5zhSIye#ZwHMBUB#p3OHsGnfjbo87lJ5reiO(~aY`!LHZ(c>F0`tmp*nvk1z&2ESEH=cehZ|ks zwG(8K+i5R+b;U#bI<6KeHzzVt{X&iuG$A&F^O7?HFHoBDq7|p0HS{h?jVdsI{yKA0|{j$5$9IL{tg-(_;~ zW~~ixz?;)Vz~bFxl+5r~SC|qLX1gv@;#CYS^0_!_obfo{u~)W|TlTfIDSCg8PVFS} zzSZJUswlz_mU3&`BCDymJdLYf45Q!Q8k05){3#fNe|aZd4ryyEQ>c**55yT&d~5ls z;C&V(**L<*RA@E&i`)!wf~@b;aSIu{R_xRrPV<6xMW#W=yYb}&)uurjgy(!Xc5+ph zIFw+-N>J9%ae9I0oy^j2@=G`VDe6RTPZ`g?3t}%;hQKQpU?Fbbwdop`?_smoTwFe> z_-yk1Wx77wkQ!@0zzez*dA&x`xA#YhCU+@2pTlELR8+f1vWqF*hNKP<^zKuh`Y}Ft zBx&1Q9bEXk~pb!PqFM)g@eUZ>6J|sK-cJT3+s0u%kUA{>^-J#y{ zR!IY!NFAb=WrpO`{qEX{Gf}D`*oqT&A6$)ZT@EfX$_6w3v5ZKJ@-#I}FpOs>vw##& zgz1C8g~wv}L)ua34qFrqmN}oG0NKtQPbb`q7T=!dNFar-_OZU^oc>fVUsZkg$`IMWtm z<95v{e@|}yzW)vUd_wyB+28N4FcBCKnkL`<(ruaNcl_oH!dpcehTN~odTb!k<@+H# zwJ6XjfCU}D)_|pfU-GhTCdZ5y?;ZFWjSX*3F=lt6{gvhr6iMO$uX>w&5tIA(<$b>Y zfBONywGh0|3l;$AVgdm0{?EU3%Nx7e{`;vrU0c_6gA+4gwqZAvb6-Yy*)+EO z;CDxI-iY`8IA*@hN(O7|rrq-jlQifq2=w@-8?XB8nCswRC+Ur&0-{2VygHNT#g#>q z|K^w8Z}mSXKJ9u(D@ZT7=avccAiTRo+x@-`LIum}AJ(0l>O3Oiax6Kh0b;jOF@pCd zF^5uNQ)4Sn&xXsx*LLascE5!Tt_j<7^?Ut&s?YUQlwm05)l~j)n}@_y`JgYWvC52; zc+LI2?WzCsrvjx-OHi}rs@Olp}lgJJ^KU2}aJ2WP1*6KT&?jH9&ldHkwEe|$T zZ2_}?beA{mK6td_bJ^s?!er0`m2=I0B z|H*Mr_!Q8!=DzUH)ZX#;dik?|zF*98{@G<$H<&*@d~xtLee&k)5zzjFrIbj$*SD_b z()&%x(XhGVX;J}>yC=)hkgKNC<0I0O+V)TPre9!nbK%97q4t*1dTXS8-OXp&n@LDZ zMhTB`9n$-{vJB_wE0(o)HDZ@*TjDD*RZTWilzF(MBkK_PAyNsB-56dQXPro`9iXmm;axL9%trzeER*aRN66X@Hma+ zIBHxv(>MVIWt9H*L;Lt{`T;A9s%(v-A}*MFH>?yqiQ~wTFx@Jeg{65D@)~I0m>=%p zUnHFmnknq=t=PY4@0;V14+t#+u_xS!ta;7A$!n-H>`fibrmlD;?CQV8eDnGH=XF#6 ztnO>v1k{M6FmCf>J9ZNfR7|p>GV1@imzKEpzmd2`2$nv@mOvj>Bv1O1sEf8vDUpjL zub|FgHQl7gs#7Utw!d229%I(3lsG=pq-~FZF)u1WiZ*7^roPnP%ZQE; zP2uw6@90%;nM?vJK}sGeQ)Kc--`}HqYWa{V4B)d%SuVKE-^~=TxLs?SfyOE>Ow%jq z3!Vyst|%!~glKPaoc_KJS4%rW9f{FC^pE}rntT(vQQ!Sa7E3i*T#3)=Q@msyU)2TL zp*vP?n<<=S{JLT-s9^sA8R=A`2i%m}V$QT^1asgA9X=`&2WG_KyoVafwsnd8jyiQ`5=Xb-3?3JC)Q6^a6GQxO3HIiNw_5OS@VQ+%;G zT_r`+0AhBK(PMm2ud++*JHdP-OosbTI*>PwaG zV1^3fND77L?&@N#i6B(l%!>qfBNT3R1}9A`_wpGzh&JELta<3ZU(gcK_ah0+xj<15 zYHBXE?>w-;vVQ&CYm!PUPEw5UgI?8M;FS07MO2(;yMFl@1ri;2%)zjf*5P;Po{KrA zB~C*u$Pi~o^-B;!>!VwY=|1EinBwFFdEpS}SJPTh(0hsb0t1IdH$yTfllvP((59Pd z@ua|o8~#1iq@g3b48If>s{8YH8DNN;I!c{5J5)ii2aRtcgM=92BU~F^#0H44AQ!!v zF~SZyS3XE~6XARfpr=d7&bk9{MWK_&;f%SZ*W4lFzB$Fuc*r>TX|&5i%#*UV>xqcC?JJ@m)%OC~X?6~JVsTH~RSHTM9|vga zGBOc;{$(=ZN1G*lV;0UJ6!SV=4n>VOf>N7hZ$-Gh`FNA8w#GZx!#f}dK*8a`grB`= zaDADx-QdoowYnvbNUQzEPva|jW30A=5luoNWxRK{cg^s_chtr>aHq5~iZr=>4c&4v zzjPXsB>Y8T9n9p_3;w2PZ8GoUqlPZ(MH3$om8N=4`e*#w%V9R{_6FwLwmDf$u?DV} z-XAxw00)Zo7^+=aU6*b9ggD7LNeoPsB31X`*1f-A|KBx;tf1`U8PEWL6(s#A-xU$}8+gC@VC*nMd!ev2cB zRzX#$@HlxuT4Ru3i>NKmlFl;7f&nKh$o8pC&Z1Gs!pWo<`?<6B?$i?f+o2oB!AW`zJ>@t0m3Jv|iRTv~gqpW=4!jfZrnT$VL;pu5 zyTH>iEHFcR!{(Zotu8f&ocd>-PKiH|1J-|3WQwV^1pqp za2%iV(iJp=>h}^N3#FoTO>5}vB0cWZjw}D^62Nbk51T1`KILID(1d#2_;BzQZfNK) z)HtELF~fU&gi~h}@0TCLddb{Tx*Fb@mmIEi#%p%q`*L%6aq`rpb?3`hTTjY4dV6$f ze`W0!@8Eg}C+RgG-Rm8nyRgwe^nGmJB4Q7H=+^$zw=vZ^rYK~r_Q&7~xJAtA$@481 zt*l&4`wSexwg21CsG@UmYvb<-{tZ>=@z}V|?5I}c^U~jyLnLW@;`&Os7#IR2@m+X! z?B=RT&O8kQzQ#RI>sI?T3M6X;d?x;u{B;b-2Y#N5_F^xdkCGt!A}&sjlcdF^n5X7& zvwIUfxq;AejBRTlx~s`cL<}_7&yBJWB>jt>oRcg?ZSEbWQY%HxaZ8T19hYRw z-rZ;ygC($satF_tLS6FhZ<^pY0I6awp+^pYUI1;;?0g>c79 zXyyb?!S94O6Cv-dVBL^-MM#lfN`m=wK!cZ>Ld;f4qp#3fXrEK@DXvrUij;nNEfd$p ze3452ydZpnA$EC>j2O&!!Ev8G|hMSqO7O3i-0P;9Z z+5H<95_kGr@C&+?l5L^k@n0q?TjL~5^T!g?$&5@$Ro-WCQR)uuemy^W^k$CXR9e(z zb3)-wD+yC$B9SLkbTUkbUF^7FWiNRQWi&ooLbVbIkS1bC8qm0m+6IhASk2;NS}tOB z1m?YDnJ4%i5JaoqwFG`^G+-DN84wS=+brJit~5E5P_0U^jiUd=A+^4D&dV)&49{LH zF~&p~V|s`^I;^*lPH&NS+NCEl4la`3{W*Gh?8DR9$;mHaqaaIboJZ4=d~1KxWiHZMbx9v@Jff8!%Ag8k z&$!UlN#6ud<^2hBq{LBPLIjzGY#cpb`%UnefIoqP62W zu^zvtmEfRNAJ0d&f&c&l#(|&>2N0kG7*He!yjDR0gtS3+D?GtkVL<@_Fdzd=ynt78 zSb)|lnrsbmtPWWnuEO^jKv6B!+<^}=u|#4Vi10TruvW9m)<|`*RxJ*InYk}{Xy~4y z&!(JwA-lf*iJ2_jY!{+KaM}{tz-xAg5`4r>SPU$OfFYaw=kY~QT1ab~Y}XlwwFYbp zKn+b1hG`i@CGmSX{22h;r3JUrB8`93K%q8qGfb}652~aE;#N=?JQ${KjKHX+%=vo^@6Hb+GOV|upltzMRSW_Px!hU`euTs(QO611T;kK1B zQ|}Rv9DfIwbPg-B_is`6MUZ>ST3W7o`WLNC0ktI(Yf`@KdHtFTrG*GX+Y3wXIIZEW zpYKwgO*vm3dz9Fi!h9CL|8TMzH#-FOLa7TCzbBE$smW?S^q&xq`O|+S3p)I6Zq@u- zij~|uG~ztz)3ZsGP1bh39{DXaZ72r>dbm2*c~^(K^9L6f`T234g4VTt4Zye<=P?*h zg$=a`uBt-;5T>%dcg!K1+Jnt{K?8AviTT60xnYWvgDZ_3YnyQkP`p8!eV?t}VeBjU zKHLfNw%me-?p_QLbBF=So8wAMk!%>ESG02b<4FD-7znG(&6ROSMX46d4w@ zqsG@QUE|rFiP9h@I^b9>)kmC_h}wFVT*m~Bd=?;b8i&vw9=r$0WPtX%(6+RB)z$K~ z@|wg1?|GV{&2BB{Xj)unI26|CY>h&m;|rGd1#J_&3~Gi8SS1N?$!$h+Z?aB3r-#bT zf&~O)&th>M2-$}=wdJVnjdp-w-vkhYx@($Gy_wAWZ5dTDwA>?t`4Wq(Y06}PVkz`b zZ*q~k+AinTzO;$+B}F8`j9uM78mqj}>~|IPceCb!Ckvl2>0-0ltfQyP`VcAN3KRYn zRlD|@iIoROJ@+>P7w$OQG}ib2-|>vua>hUlaO;bWUI2jP|BPo;t?g`GOTqU|*eX>I2`;*YO?!}!u zQWoRVvj6%1{(kJ<%Odb|e^QZXtGCnl<^1cS!?B?M>+P%Gu(!MWC3B^tA)xE!ag1nt z^XsEvO>j%_snG9pe(WgIac7I5|9yA)qubY`Wv_4TTKDfz&g}CQTj90iU5mYK|L5b@ z#^1h=yRU=7>#yhIC!qk}w}TC?o1NaTqs(s4mwm!((S(h!A0LG`-HnkSZzoQkLS0tF zvwLIrLV-71Tm64(FrGe_8$3H4cltigo^n+l9A650e7|1q8~WKlk1hdJ$dpz{QnD*DFwKG@B z^CsYjujj*2!;Rx+#oqR`re}j}d|>}uVYjEFse-Ur&jJ`0v94o|#X1%W^t_$lJzyQJ2nOB`*mb1(!y!6x9%ydrFG1`pc zmcoO=s#!*yct}ZlGaF^XbLbw4zwrk&IMJcINZ+?sVV?!A=iwoO%2%ha+tq@<@%Z@C zAP14!Ic%UQy8$#Li1L1oR3jE0S$7yumL3rVc|K$;{Os8Pc{DP3+GUk39SS>KAZ&z+ zB~x(%DG3WIcUrqLCW8f+Z_1REh;)_^)=Zm`K|F{FDyN=KpfS}$nZw|W=mA~fA`x^SF`m(>@z6%#& z1jLqAL1JJvR^P8rQW(uw!?}fT*t^SsR4G`CffUi0IEV8DwYjhN{Hv49cQjRiRSdfP zRJ2xj5zT#uDnZ_y3%LHCtW35SmWXDlNnH&=x_xw`JvAUNrg3dQ+0U)6=57H4+)aYo zKqy95H~%OSR9H0)XJC2R2s}?axV(|VOhA?RG=?=spIC#$DrT!(4~xl)C#3#IMDQac zh|XSo6&M}{)||$fbWd^bqZ|kyjYSAQTOp6|S3Y+!0Z7~+t5AkSblf1~Omd8A)j4MHbXJ<(jqKWl2pBmXsg4Xp_p;mMb-5hb& zmy|(j4#RlEL#ijXh|YzT^FU5sSaqbg)&NlxNP`rU%R9i%zV16)8>Wv#|LPXcDHsm4MX^bvar7Tli^X6-{7DBDR*Pi9qS zD?Z3n^g=iIKo6a75UH$i24w|VRgkfax;E%4Lc3SbhEddMF zj7HNuxEe^MgHT}muA&dJgeCTq2-2wZ&IHQ(DCO$LW@X}f)aEOMgujW5JyWR#GeC=wF0ZO3Rbp-8}Mty?{fX$Up$fo86)YRUwP?)Gg&D|3^)gfY?w7}WIV)c_#3IgD6BasawZ|2Lqn>XdQ8JKtC&MgPL2N5dy)N{(81*OMAZwtr^ z>@%7z*%8QdBW0Ad)2H@zB&8ix_ML<)m?;-~D^XxTRMI3^a+myiMY<|f7T_zeUINbX zgzvKhq=^-imfBvM#^p|znpK`!|Lci}6%*SUxA2>D@|vXd;)qJ1|6?q!Xctm>GKD=E_!s3#=sS14IOv^j zR_%4Eb&R`&#Lrprv<4h&+>UgCQj#mqV#Mg(R+oh~U5x_7@=2sMqOoNl_c^s;ey-Z836XvbPdB>n_ z4!fqI*C|i9BB+j0$Dtd5>woy<1Y+#y`5}6l*@ykjb-26-NOya*mx7`a#rK=+04GnRlFPHTprpV?KTAk^-SZvA$p*so$+>BT z_(P}26~(fdvjrGt=?w@qRz-7WcMKL_MTkyX;^6Ug~Dy(?R( ze^~?x*~5Y;={ZEKB^_-MNO&_@%pID5B)~s0&l7@XPBSFu1;=JY{FI5UsfZMA!i9x>$k5ZHD+6rJo2Mem_ zBQW@hYSqhImA`tUKFcW} zpxvMj_Bnk0E`Aa};h1*Xg90pW4~m`cv}21@8<44Y#zY{sNPHF&waCVZpD@h3@Dx;9 zQG@y=a)^I5dzjHB^#=4HcDmqg+r!77b-5FgnOttx73TbYb*w~;+;xmV|r{{lMf{D&S2`ZlWrLoHs;QC`-9k<|0D#XWbjO&F*pv;ApQA$rQ zZHR0{lztfXH&-PcyOK)|IFejH@Su{-36Wg=yH@`45R@_jYPe<5o0MWV^hfyHW%U2D zaL1`>poJUXyC*EZoyxiO$U75rphZ)B5b;1#=pWQiNykHo<{Ym&h+E*1$fquj>yiF1qZXVqLL6wR?XhdASsEE14) zwS)EPBlc7JV|v&+1a$|r?^h$z38*+=nFh0`d*j%r9i)zFH^lyFUxl#Sy^3cM3CL0Z z02sR;pIpBtc})A8M^cGw#a?oblLu%ef=Lh5WE#F|V~8Xbl*!WU-xk=%R@+B7CA%!d ziyuLN_9{{Q$U#<_>^}i?2&R$1MiZwjIj~|w&kX8c%`v8D4m>cm`L~s!;(X0}T2lQl zGS~DbG3iA!E>_JdlEbCLUwjKdVwCYy>a|aCMUt=6j;47Nohy!GcTK|rL=^I_wLu^+ zeray;XE?E&4?sPR)oyxtP$W$~oxua$#Puygb`7veV7sOT*}F_BFK|4qlI>-cfcw>b zq$QPW#}mocCLr4b%g9z|u>kaN)7~Q^{~VI|wlvH-wP7lg}57Lqvo&Fd`zSjNp8M<2e(J_44@Vv zisBPWJ8c2@SA?PDgV`XE6-9rG?;>J-@>psonfGq&QyqeSmEWQ<2LF)S28JB>3NU1= z75fe-6uV&VNZ}~AZ9R#P!7N-a?Mq=*gwC3>$jcR~)+%gh&VgyD{+IyMU}Rv}j#4}e zDl8Ty2shWx5)zR5FvtxDFjUlt?Y2`jXc+s?<v@ z7R2`MeI67~L&65WunrXm6xIrfWRdH z-fBe{AX{X}i|3JbL#+Iign1P{rT|uZoT}^`CyN3Nu-2VrVcvC~Xh?Whz=6)!5qtx>i5GRb z8>8F)1ue9y-`OA6eJ8Qo5|n+^dA`vP*UI?g&>Z`{Q9uQMvw239$ zO#W6Va5yFfgx{+>ys)&X2Q0e;LZd$K0?HA~&J-9!>aA9|;GXt>(}k2{6Hsi309wUp zT)Nd^-QhE>fCI0nt04wzWcJZJu-`7=@_QQ)O1F%lKwwG&s7*fY1aG9tNSC_|=S_cr_W^FS1NeHWk zdGO$&L+6;dbhpBasN!F3%y$C^4ezvd$2BnHyg=+;6?e64k(>BJ-_>mJ z%Re@`KB7ud3<))$Y6^ zrX)I;ytDW(M6wtVr6`_ckVe^OD3CdqBYp5){W4)AcPW}0WVcah?ll+iBIJ?`klXq! ze_70ys1z9K8eo~{7~L*1(B{zl^iO_oQxwri@}&VA0{$YMMU^X`+2#5o2DczIpe79z zM2kWS9YkMw5|+Cd8W65kf(@uqOCt`-h{cEm68*2d^L-lu%@_F?*ZJcP5{W?2#F%GG zZUY1^MlLQoG+ho+mP#iiCNf$e86#2Va^N@!&b zFd`exQEZX}P!4GGQ_!znQ!5Wy#^CQu3?FU;d^)KgYyF-doV|6|n^tEM3h^&rXVvv% zipkhlkL^XSssbv&4Q5K>T772n;;pc)b9nY8^w<{I`-HR~yPrW&YkF0O=4LyHp+(}c zYyo6ex%hB#MMxo9AUGn1lY-{pA8Iy3X1R~<)|S3~H6LlohZ{fSSMC4nByUN5n;^Q4qgo~8QTa%zIsW5MO7FvB-c zGRHz^`Y>lydQq+>TdxI(vc?75W+?t(6uqBVqJG_DQs}q50z-K;hQGi|C5mH>YDjxD zSKB{l#Wh4@jobfUvMHwFb}=}+aTSa#n~$z7^x2iRpLZR(ckWc@~5k-ZCWknvwF z);?Fp0C9YTc(Ha$`Q1M;7T8tEX^D^*IR29fcex_0$ez{%T7;+)n*!KfkAafRRmi6P zBgUp}o7S+1-rKB*W1WK%P3r+{q5l5_&9S&oXazJpm#i_14rN1hgXL(ltgln-D5Ta|6V7e-wr4R|D@ajh96QrU(zr(Bfxm0 z!WiB6v>>EI27lRsmHUi8kw5eFd%l3{(|f+Cqb^k)u^fe9Nw+0SfVBit*=5cwZC3jOXC3jA=U{0Hp*6Va!y5%?~uT_RABTyxGtpfv6` zg{K>d|Ec8!?w_D%Z$tk|(V_5w^d#{$lGCa2VE1I7H+_Hy!%$^VAun|76P_~IUW z@Big{FYvp2CZkx{{u?8H1O^0>z>BS@QptN7a;y9(A_)*1m4p>FENc<}Gx-!CS?X~e zGXMO`f0==;2AEgC5Ln>aizfun#3v!n1zP?GnGu_IOGjiA@ z%ytGIlwB^I6V>}G=4MVY7U_JYC7fV&Rz5VfgwA1JHI_GzPCxtZS z@!7RC!T69hFk$1l*>nYgu-~Dw#t8{cb~2oUnu50sJlFK*_t!9|EjEb!szy#Mw)tR} zK&Vx`gQDPU5-iU(wS10<2bH}krqwjH{0f`wN6`+UgyA2@v-q)%!kdqpEGeSrlj>Rx zLz-_G?mrhE`ujfLA2uu%FHz)A1}Xz_dMGY)g+AvZZQTTFTU&(Mncs{KaMfpPlLd>)f{)K3=6;j`Lue$! zAu%7JjRCS@@|N?ayl^UQYaP=%L#s;%EEH}aDPAfdDKVy+=f;Ir$(3PQup7%YLXDi? z)I@U&jRie()cw0m=|cgs9D z!lGo5;0*s4cW(g{chKz%;_e#U-4fj02@u>Rgy62hJ&+LGg1cLS`#=H&celYc!F3qf z$@krN>$`97eS52RU)Anbo#{TO`^%Th$kX@Ykag92}v?sysEuT zl*9I~k`iziU)#=&gl{m=AFN6FrkS4EC75?RIu@lkKfGS(8p6OK>#WeN_4PP`|84p> z1F1Se43bX2`8ipp5Lpf6f9ejjc2A}PH`^SWCXS@;T}H*GMNb7F^lv5JUAVjp@y&O( z<9FOY^_ZLqXcZL&m{NaK=EGA^Ad9u<1B5__#?h?`g|a53?gyHWK&fCKEdkXPrwAq) zAbC#q>l|nHz7O}0v*YMVbgg6SDAy1Oy?rXC@vFBcxnV{Om7-_w&~u4D)5yu(n=cSf zmf#_^*tn@&#Ki)8fEFu}TRX9@><|ZLOJ|Z+9;50I<_M4EcYw#XFU<~EZmtg(Yq~2OO zd2RaY<4EBcM#x%Mm6F}lCbwN1ViO^;gH>w0yc>0$62fP8k}~%45x=9)E;s5aod)ur z;(G%tuSET6yDFK?tC0l=f2{`nGjX6{mGr#m)l3<%a$uy7-V56UljNx#U0Rc`TIl7oa)OdQ!^C5d|f*e z?vOdse)ta|gv<%|B+kUo8Cqa%;^{63P6D^q$Oet(4Cy*1BX%1U-IK`%6`BjZ>1WNO zUEDTI{8xwCwYDDKxEER-Oq5Nq&Py;p+mZb(155ve%q;uTKW=RTDL6YDN)`$-2Legd zMVe$;jOP(tyf3HotRw@jOW0m4f1C_}zr!AUc!c?^kV9KRJe#AFvveG2j!#zg%fd|A zVtVE{@FUtO!+zAAc_R3H)QFERc;4J`ilca9W^{$)xL3);P?DqMO>#;44;R;J1T}_$ z>d}ptGaY9W4g!`Ayt=6twaOma4AUvLo2`mf0=Q?5s4Dr07zv{DMdgkO;`3iWt;O+| zxa!&CE}XVenYR5~<1k%c?HolfaK3%JJ98YRWk|V{Mot+bDo!Xl|L8qgZi;2E2UEH@ zz=SE5jF{V}PRbLniM)Lypc+*3mOSSZ`??*YYwo8OSA!(W4{Igu>nReIO)s?LN0jaZ ze+%$PPJN8ABPc%EyaEsHtpoD3q4z({PAHc{PnVzG&d}aAO7;PB?v7kTo1y`6@8x`x z0(9Ek=To(9vc&vO$X{ZW?e*q4MiD?_VF3az-Ha;u2^2Xe(cQ<`v8LI%SUx+-{n#rKK46oSccLM<6dget1tr7# z3h3t6L(=zd{toI2qL6P+?-=@RakRgpxvZ|NhhoGdYJ!f;ie zU1(V~)b_GV2%E$XTc3OfGJ>!2pnNmEE2IO=4ITZ0C=IA@qfb(L_#Mqb^Y|;w)41D@Y2Rr#? z1(|GwL9<}Du-0Qf$Q?EbyLaEF zgMp1?8p1%&VK--VVVUwy0Gglfm7pvRXrcF`%<|QGF|1Hw1@<@{dN&SRP6~TIlL2)X zLT+RrkTBR00J?4koo@`g8xMPor3<@jE?7@;y}w+ST84qv%Mb3?Zvbs{Vcl5;YhkWo z*f6uO`&v4f3@i&$1$fL21795hzz2=c^9vZ}7I<3bdEN^C)F>D@78mvmfW^|mAn+su zcjrRyZ>*pXFucacz1wCPP^DFM*rh!H91D0_1j0aJu+>7ybs-G890r3u5q=MYk%xi1 z!wlB=)T3k|Z`ozQJ4pZ#pA7UgHVl>ofEI(bo>%e1zWNe zhuz-*pVMUEk+RQlXXgR|D%W-%+w2R2mw*WDN*lHpHmC%-Duh5yHOo|>=Y^1gLfAnV z=tkyoCkb}U2laxH2JbY&4vb`=mq}qa?EugLJPG(=uxY?Ybntl?7@h^=GLX%}pAE2e z7!Noc1_OfU!=B;U{zwN;IqV1@Adi!I-wptiCW8yFtiXogw-6-2rO{;SOv=(}4_9qs2Dg$16+-X0=hnJca_!79|3a>UYB#?9v0$#7zlU;V~J_hy%LclLlqxD2re z2*EvXScvE}q!9qlvVvT;hrwzAF^$_t^^>rjW!N+w07$a410aQI14vKg4*4!E;Gfn* zJ`dExNkAme!UY6gYM?OicSt0e)Erd#b&a z@Pzz=Z4jph%7gRo0hiI>o5FHn^<5Y=7B%bzlswe>6Hex&e>y#&HIFR0+GP zJoD^?>?c7_A40)bz#SqOXd1T72i@j7VLPyDo&rBo$`)89hhAeZ@k4i$VB7f6-;FRZ ztZyqN)axqjkqw{?J7rrwyFbu|?IwYf#)3o3OyMUuMoX9HV7J;1cemqLjRAdYoHvaV z_ksItMh(lidr4uC8^ERcWg1|B2NYij10IXWJfVK}zElA`XN5hn6@-NCc8~9!9mfrX zymfqSe*yz7!%p}@lM;2OJbwe1aX5FLq&A3QO9M=Xs4CGK)F*7A^=~0(&7x4s)+WH? zxD4nC=Gw?JJQM?X{6monHbwS8q%7M{X^28f2P7fuJCG(pomnjAz$9VpSVEuot1k zuv3@fP(uhN;wByJ^Gazx9ry_Nya})+d+G%+pReR11I|qi2UyOG^nTu16)b;QCyd|$ z;fH-l#Gv~wT8E%B^5=5$S?QiG^a0*q1SM{4n#ddg-o&MA(c%NNn{@Ok- zrQK83Wv8r83DdhfONo7Q!9fnEmk3Uo7p(lsa`NR6@*YSeyX$CKs3OtGH)+uj`+N@+ zn8B9e%1&}QL2w)J8vDccnf;{ou^HT3u5loOezTeFM{YIK9EJzn>Y1-!H^5lcZHW|& zB{Ah4>F))~U>dKdxbn+&Zx%BCCZrB9ru~hI5%Sfeb(8!h&t^L7&I``(Z@$bDsm_Y~ z_aZjge|!1-vK)IAS2b!V6F3#{b<*>#CgctxA7T4|^F;xwDfrC&L*~4>f=o(zjIQm_w!bPv2!W*K zs0#5qL2C88iEJS4-e}-+mK6*H?_j3GAkSe*S{3EkkY7N^Qz6WeQEh@+_%r0?8(XS4 zfo)8EFS}2$oLIv^_W1O-s6K|^jW65m>e7pnpzUsBJpJWg_afY7v+^Hb3Xc?;Tt5^C z#sGGT1FS52-X{)ZbaZ`{$*SbVJ$!)0Eo3b`Eww)Q*vub=nX-)SEY!@H8&j+=pi}VJ#<*WN}8@_u7t=n!(fbC4fKr(;4 zr{$ME@e^V|YO4UWpy%ff!*4|@uQe)2J0SK@>DG`!PAdu{CG0v&g~wi}QE2KxA{6?|ezCXzPxSft;PEZSQs@z&-Y25ta$*P1N$w2mg zM!o+Lm6d*B?YJ;SsZFT4Z}n^CaVErczlrwVR4>yO5(*$fg7-j<-SK!VvCSHBcZd8< zNXH4^u{g3D_nv9O?qQEN0JsSU{aSyolNf?v=5Sj;^yoOx`N*9IFZIJ|*yV#P(M9jl z6wXbZ4nCo*<6Fj!%pSZ?BjPjLLBBh&g(&U-pBW!={XlsXO9XAS<80v%thUXl)vYZ; zC~w}S%@aUxE+Ccl2l|pI-rJ0FV+Yd4FZ+MBg(l~L7S<5P?*5cYh={DJ4TNn&QUAe`L$NK+is8II@g@m*G2_SC79 zK?r>PrSa=eBu`}PNX&1x>`3*cpa4W`Y-PtRm53(2h4Zm-#43i+EVFH^p@KfT4usZE zvV$a72OgGhwLhX>BUVUq7CTe6(@eRckgg%T;-|kYl2Ss*$f3YV7Dtw^A~LJFjZYl6 zMtBgcGcX|FHwl#s>I$b^>YSHdmo*4(4fjMOBOSx8%JQcVu!A*l@^Ze0${yBs2nU5e zaL&e%Ur6G@KRT zSik6koA(5nHwewi!DE%_XABAsy)5!sSPEIXS4UqO;!-IFI~hBUAe!t2O@1`aZ$>== zKjhok?|5ug7{0=Yr{VQx;nGo54phl{-4UUPL^VhUs0-r~;l!UB!CpJt{zUwT$j--? z+(eBIOw9-g)~t{I*i`~UQwT0@K?VI(4N=vT(a^V~PB8NUe z3nbodjsExka;h8tS>fa7KYV?Gn;2u%RYGUT5)Q;z2(Bqx5p72!IPlvHI4%6&8Lr-U zObx8a;+&FuFwFR(!&omv5)r_jZU|cq5o*gcfe%h?vUcHC1+w~)@co^BNaD!g>*$ms z^&o?hHbYsNXrdFn`S035*{S+OL);nFb75ano}%AY;W*O@hz8@e!H9EJOto3;SD1>e?)-fSOdx3e`5{|x=}^n0F23;<_OLi2#K!P#3lq8! z&3qn4E)sCS%y=7r&6>`@gLpHJ(<#_-u$C1<_A;h%|A17#Ob&_SH^4E%x0c8HTk>dq z@m7Zq+Wx&ugcm{z3&mtV3qpTiczlSd^~+=wV~Ou>d6-#pI6RLouKap>RWd8)_n$IMdG!;uk`^ z3&LSEFH*AoL`{ukd_1lbzv($D)~byV&3ep;C7Q}m3}eScHOVZZt}$R1(kN8qh_?zj zK+N=j>TnZ7#!Wu|@Y)&1Cb#BDwm{@adVTSNJ`Er*6OoDTbVz;~G$fLU{+Q@>n`}0z z^X6Pm#k*4s(}5C01A>4cSXqSd#%>JFR3D&P70FGH)^Xa3He$B5nnLH}I2qbJxgc``4~-KZ*W&`oREvFVd+khvP3U-9>|n#jL% z!{}EwM`}=gvbpCe62jRW!DuLm-6sVq^5Su*<51(ICk- zO^Ilor00A?cqd3A+H{B4-);umM+>Aq+08-O?pXirh5Dk1r+g4fgs}baowrD{7`=xY zw*{1FCzj8tBJwMG05!VYmO48Dmgvdwbf=sAYy+*oo5KW zlLimGI~qVJG=1%4j3CX#%#~(Vyuf-j9Z4xUS9Ry>ucg%?)8!zy<1Vu!BW82x2y+Ox(FB&MPKF`Wp!L0 zy*}Vb3fEYLlNOL8sJL>%Z~r*hr1J>*>26D`L!}fTw4`KlK#nR?%Z(t@`hp&dK1n^6 zc5xOtqV*HXh{SHOitlaQ-vB1+Kz)@Yk7FGgsULp>G2nr7OqyGM8u*B7B`VL-HRW|Z zN2doE3j~01rEx{)9dHCT0RxlS+!p~o*Igu%$$2rfNzvD&#TZ|$=6E+vP5ck2wcvYe zYiEZ8JJ&bYMuHNZnrDC6I2(BXg4+PaZ=1GqrQNa;BWH7I&c zeFzRKiYuoc4LX0oBB8!6a1X?IgB&m|;z){cs!oftEklg3AIgTH%6&>7NA|LUJZrnP z#69X&pcTo)i@rA^cySaZD#NvUn>t6s1JqU3gJ+1_(yu*!VYoi=BB5lUgdF`I#~?Ib z*2i9NCuBTkO+(#IoYcYqEk&(n$#ac3d|>X*aAoR`m}HC~Bt&^lj?+ZBDyRBRad49H z`gMAPgBuPbjDYz?B89X6wn8g4v!!|@^JFMJ3WjGpFqJBD5T6g3e}YCswTt0sP%`;! z{!$&*8)@(4 zVLUQ<-8F&(@!<@~+w=SZmHsC5ErD0}tCxk>q3>Pxz3i>YRv~jMBL_?UBuUS$p2-)z zh^n1d)aWPV4f2y+@nze!d-T9=CSFpAUjTuZ3^uLU@-O7-tcOd~YZEiMv|L+N3%YuJ z%S?1Pd}-C@5t98NhLEZvW;&hcAQqafr!6(?PD}N;4R@CP+2_`1KqpWmZiBBP?&AT( zuEtpV{Y0g=0DLcW)5WB|y_sRQsjrl_^Du%oVg0U;!nS2jl@?QzB?m@MYn0(POAb{u z?@odyUIn=|Rp0loi?fW(DPBZz3eB!z5k+f;tPnKiBaU{qnis0RQss{P_JotgMJbN0 zR;_YZ06)!ujagc&%JsGD5kqkX|7B?pI@F-bxlslEq;?6-)adh><5%|zf1k2%)!{WE zJWr9gmTzTpLZ(gS(0%oK(gRVk9dAC3tch0y*KM9CX{CgqZC_%lF^tTZSM5; zx~X4<88nk^s%0-Cyisy;luGCaX3|B=G;vghu<5wVNQVq$(_4ilvzpPOnB@jP5nqAW zvkAP(Fg}T(^ffL#DS~jTF);(o5E*&Q4Qad`$KO9c&BeUoEm@}lYtfIrSHa{U=M1m= zDPzg5qT2C>YKpt>{s#lL%vb@dj@*7w+b>@XU8y=BD+& zaN^j5UvGB9R)rVcFU2yYMbGDU(l@z{MA}e;tY8?ujmnv4{AvYoLDwUDAoA#ts(L>a zNmusliuPHf7ijl2DGV?fE_xH1JK#PC5k@Wpx(iI8bpY+G%3kdI#rO8x9qGGm(aRkcf#vdft`~Wott)n zz`Ee|kpp35&XzX$`EW&7SicRcMwv)z%lmX^$;??0ZHA-9$R7y5`F@5c~drqrqe)frVoI&FBobT1ky6rP?vEG0#^#2 zXztR45%=NmUkoP;)L*ca(I|TIG3H;jFUTd0*;xa@cQd3x?E9mN`1PvQDCF0StTI!5Me0pXju` z>#r$jUKr(KCi}H#BXIcVV&*Tvo#f#5?769_4o0rrXaZM(@_a3Mt{GvyHAkkPMFSbl z;-VAHO&e zeCbE$zx|GOsleOyBQY`iB`vYe%b}L~Qbd{6)TUXThT{TuR`kFj3`H%EXNMF7t zXIXF8FP6&Lkw!n&3;8^z_PBkE$77)JW8kh8o-2rxbREG8x2*LT3L+Dpa~~P(5A3Cv zqVN5L^|g#wDeux#z@2lY)fY!S*-b5|KL}SIL8FvUVr`cEwFufQ8)jt5H>}nt4GGIQ zX2_@7kMthhUqW}zET2EE7}HL!H0_S{hA&7w5P9uw;av21Unui#V2^bC!;d#8@;~1k zi3xfoayHc)z0o1^6B2Y}Detz?or3+~w*RAd<=}Lxm#Wi)&z$*Ys+Xc0YThZrhr2V} zYupfUwDpA?m=WZSq5&T3rBK|>4?@iLKOdsa^*>jtk?JsF2ob_(znAhE@3*mD=i{O; zlOnv6x{UbbCVRG5!dD)Im$tOHMn*(II9p+34bR9a7E>ujF6XJl4##_>eo4xGsz*WMQa zvRpi?F!{MY7j)-Yhaj&JgO&EBQ56mYBOf$_#0IE3;i2wkId1!2k?mw2{|MNw*E838 z$k)S7a-z?evB+FPrh1fzdula25#0Qq=aTHS8*X)-6x!+SC!RTh}Rn z5a(pKSk=)wS%&utZ2r_Gw;z5Ps6Vu`8Lwj}?#&K&6sF>PJts&FSnXTA9q;*5xY5ro z{R;Elbj0`Io?lZX6U5E3BW}^Xhz5$u!dfU;A`wjZ)zR?`j;%?}y-I?~hRYe9LIl_l%X>p=n;G^jt zoexy)91I}r?+o-4Rd%BzkF#9RexbCa{gPlV`9i2i@_TL+a7oXx+aN zxg}1qE^)3iI@)dcXdD^jCAvgW7NQ#@P`S%qmYnS_dzz}6#!k>P^I&=|R6Gp&e&v}% z?exT8_+cP5sl0WWaaWUL(Zb?_VZwO)qx8L*!5vOe^1GNvyc?ZSpZ6F5sqtc}h}Rv7NCozPYH%kXMgSGOki#CNotI9+W5d zN{F$E8V=(2VOTbHNVp@!X4xmhu6LBSDURN-DPAc$r^U92ON^<|xrwQeNCiAumwz*} z?MvpdAY-IR<;n{0XlMPCum6Njo8p3&Wc~4C1t<_dHE3=^+-^|&TXQYS?7m`MCnHAn zw)4F^uT$;s$(TW|IR$!m#cYKWXx!kOh*1IusRRXN$k(kC8Aj@3$p*g_h>>(upL69N zIzsSUn5)*Z(zcPZ@nbc?Qvup~CbuqX%9rUyje>jeeO4YMS-b7qEHB%}DLo6-ZU)@i z!bX6}$eoA>;&8CVfcmS>hCl{Qg4Nkoh2lKrm3&s7Wdg*3_CiB@PR=mF;#e=ew`3X1 z6o$SKsOD!*CQj>K&>;cXp7V%A0vprl6At2HLn}`ZGF0ciWqk>7oR%I?8NwGGsWwN( z5osIWLKT_yV(3+aYF{rpazyi%VFC>rNE+K1nLWUKMa9Xbdc!G$9Vzacs4xBKp;pL{8w_ZZHvODmQ2b%0BwER>1Yj38M`sdbJWZuNcpy^DY z+tClnu4J*MjpK?bc9g@djaWHW=j5EV7yhby^fd~}HL^{VWexx8fD->*WWGMLh}yXG zCbw{5BFEJ=+B3oRGP<-7RJFJ}BCKZcQN=oFkUKXWTCXt>s$Hb_6{=m=G01QfQni?L zx>J<3#=UWH1TDN{TPkReUL-4T;Ae?fGRTf3%H`#^T<$a-S7qu?tw18%#I)@#yugQ@Z8Jrtm%5}UOpn;=A!E@v7<)w~a{ZQS*$6+ZnaG%im zt8XVv7!NO277Q_#`?$AKXk2%jnL;&0nBghm(-mq8!AorXE?Sa2jVMvYwKeOE-NlPe zU~QM0NpCKgG?(Qk?;|v*jKsufvCtPW^TvRj%JGY;tIJ-4ppcNo=Jyi;6wHqm`x?j$ zRW+)@t!eaX-Xjg)2da5>>*afzjVyd);txe!kgj$HeH5Y_8%OROH!=>Jk;D?jc8 zp5c3SBa)XqbC)HH(5>8*g1E~}XhX=zy#6$YH}*W3(C;tVzkUD4{F$485y%umraPG= zjg8%TZ_EFGXfvQ&jXQ;U3l#9?K}=yzd2*Ian3dH44( zT1GiIu(B%BmcHk5gBAk~0<-4t`X9&9aCl;h7TfM<^1d?!h2PV>$9W`;!;PbOKU@;s z{c3@W=$$kGanfSdySjKi;=U-c`uFyNX`Y!z?TeeYD7H2%GP>uY`o^nME8a8Siyt_($z~UxhQx0W zy-V)D62^|q4~}Pk*XXnj=bENwoV&bb0|&bU=>yo*Zt$vX-pA`Jm;C^|m6~mnw#(H# zogBe7ZI?t4;(8I?BB)qXqe5QjbnYA-t@N3Gw_6GSj~I(F;UbQg7AE5^lXBRF7)!rr zP1e9Q3c7MSdPqRh0|%nITE>a|6o;ImflxD_IQi=&f6G%3g~6i`r3P&?=%c3@BK=(+ zQMVHT&rKfDb9r2zo{b;+Pu#scqUO@*1#HqW_Tw?4F*R!B5xtv3qV}EpS)Ws z0xGIRW!RBVdC#^&n>tA6FGN$!K&6Zf&d#Fg--F-xBvJ&}4rR|hWFn$u%slmGZ|iuw z&`IAXRPS#7qKNOl2jgUf(*En1|8*SyI(~nhsJ~9KxUNg9mc_$4;U@{J zlz6<_y>&O#n)A(i)1j@+teOwK>olZ${t`9UNYteIyb+~&V=^8KhGN)>3i<_6dz=|m zZ+(sPwRc1<4QjgeuI1c(FZT0$7JFgN-cnmn43q=hB;VzA&|3YDZxnOxwUAPu&x?`T zV`#0^RHfq_@b<@&4Qn+sN=gy6ZFD}^e zUEv#H&FOhJX1=)JX7)h6bH7H3ph)lbAgNVim)7uvmZ;;9+~2RfF@%cvw972Fngi#j zLrvD*^m(mnYAT0_T^?N9705vtb8uF?XzwLHb>UNnM0in!>aE(bbml2u-lM`R+vJ}d zBnjUxgdG81Yk#)MiCU~om>it|*W}fdtJgf)5eVNRExkzbi)vJ|TFVMHen@} zX5@gT?6==i`r~Tc$T`bwjAjNKT|RP^NwHcp*hvpp+{5P?@m2%lvO(Vh*f3KC0W@&^ zyOjHM6uI4)ptNlErW7BgZ=ec`6a@5mKaw-snA(2B{uT=P?Z~g7i5+QP=ItxvoSMR7&>#PX19%`;b?XKJ`80^M2y$C3ZnWP7;8COI-e8pfSz&Zd4@L}{GE>o2Jsysg8N7fIkG%Z8$)OYd;v!=F9Y1D^+hSXY?g=|^uzpQ6>7HkUMBCW8^+BYO{cV`O?N1&7v-OtJIpq# z8tvXq8Xk_{iB2ar)kQ3+<$0MlnQNxkCU~=Rb6y#l-->fq8dAsL?z!GD-~u(KUwMFX zkW=*q^eF-3UUXha_{De}_Q~-yADLRD>T><8w=ozkcqV7xws;=d-WBU0hu(K8B-G}d z-<2d?nfgqnJ4(Itm?T4F%ShN&@WlX>~W9SL{3VKoL-{P(ncX8F?*|SKkZEmJ2ylZ)J z+oi4gNCbHaJaq0g1sgsInchlK+{s)Ohrix>>Seg&-lO-F58CQ_-_P5t-W@|#=IXRw zxyYt@mR516HV-Ou44G?@b~G&%tk=$IW7AwutN5cfe_!SpG}j{KxK<$Os-1Jsrum#! z0a2TWmN|yawa7TG6$<|OAHjQS^H*gjALe`{9mNX-X|!_^*))HpRotk}Kb4&X&-q9@ ziWdszYv)X{X&(JExP-$l8|c`Tg01QOVOB7f{I5r%_xVC_az{x|mR1lo|3>bwKY67z zpJ48gvlm|>*7rX=tU_4PiTt^srglyRo9294#fjSdZJA@>oS>9rPJ!U0cFrN2W}&!l z=&9;cHPb<5V*3A=g@bCQjLJm)0&(4dQ`P_5!X?jHl49Xq5*|_xfwT?7c+wzXbi9s5 zJM&8YZQ3wdo67u$CM*{pfza9V{TotkMVo@jL>us8uXxg6A7B*PR)oy-*`3L(mcev&V zTyg5?gUZRLME`WRlMnVxBA_qi7yDPc@Ih!G-ih|se?^YkTmK!Z*53NBh(mkpzeA(i zTmKcQX>Y+P;B@S%n(L^tA+NB@EA)S>a8k`x3ICmfF0a7TvH!mdwK!@=n1&`9Q$cn7 zuiE)?1mX-WkC+P|uC2!1KiYocEo`Ts&YSlysF8Q_Y#z{-{;kbmuq?U1cGHtUVD zz9w`ul$Qr}o|L}u%SnPNTZC6rorXr&;adj%n{R|qni4|zEAfN3{0^1ypo%oXqmMyl zg*mYjy6zX*m4^e3^&j2ZvDP za|tloa@L`U{FodGz(ABa7f6|hGUOipS~(pbRl>wQv{v(miXoeDr=5)d#_TKyNY?b^ z%CNilIsd8NXwn^f72HN}5}3+#vmTcNBoKp3Pnsta?xJ-1kKxIF1Va+hU#RAYZq{+D z+aJPTNP-WSgo$s~LAn|3vtNO~`v&N~0?9&9)O?p$T%52|_Zr?Yz>)D#Un6|s2$g}B zM!U=@+Q~)Is+79U=be7XgiT{s>ms2+0&ehh|DggoriPU|z|q1$0lt1z(qw82begO= zwP8viJV|e=dO6=muJ8M+Vj4aO%sJWBN{ z6gCUc5c5Mr_|o-Q+V7B4uF9`CPP){2--)=D7MD@!`ebat$FgE< zD^Bu(sA|hU7$R@@`Fa$93V=_eza21xwchdTCqI*P`#Fyt=wYkGmH3IbdY~?7{bV>< z_~EK}AXi}8fwVu9r)nxor0DAlj|@Mq;h*EUujy`3oDanKy$yC?KlvEf=M9HuT$NZmNPbuciO4E0R;g*A+cf1P%f4Ie{i&`N(HYskl?GmmN`R1wVb1Uu+CS z6I8=eLVj{|bs_)U#$%0EUH&*g^ZJ{2&iO4|Yg9S1_@u~yd|t=K13fK)d6L2B9fFOx z5ze`FQ_AB(yJYi8@~e)hPb$%k7bAZh&uoW0Od|4>0Zw8AP>q9y=S@Pj9e@3@_{vCC zW^J()n}RjQC&}2jmRoZcq9yMV)%VlO?i8>-a+HBKw^q#5>nmFbi7u5#yuMJDv3NbM z;e4ekmi(CVM<09CGA4UIl;`1*1i2AgMK>H5>qW=L`MmP+1UXeZMYk^tfyE7GV!vj} zkU1F!(W6IdRI0K+px4QDq(sT-k}K8>uq7&5N_KUfQD`%boN&kGJaq_vO^(<^;hq!L zZKd;ruioL03&HbxWOw#Tu}1##Ctt88m$3v^FiBL-QuR_M86l6ZNMv+7ycK?mH{m9Fp|c2T za`)t|Xo2td*q3eb|0W5s9Lp*Y(QADt1Cw0yC8)cKbVvEsfnziJ(R7PvoKT zlgfl-scvzXcch(CuKDl==!SYK*kw>l{JT#-Kd@awUAKeAU~Wi9PK{YbjAe+rwROLl zx}?1PfRpDf51Ui9%M*xa5BLx%FHcp0uP0RyQz*X_zR5arrMDkGU(5U}JK2k1vDmR? z4}U=Tyi0+YA&qdfi5Bu`ag8Of5z8vi&oo!;_+<|``t`U*T#(21W z6+;|1h_Hn7W9L>d5McXN^k7UcBM2&(T39ZGyXRq?eut#vO z(KkQAg)*O4&BBWRsK^d}&l)Ep^cTLd6&^jmqN|`1P40+P$yEhXHy@HPbwWaiuV~+i zr=8#mCO&*%g0Gdk;Rp`-;FpBLQ>m7tFfxq5Vx42Da`z!gga`meQ_ZK-dMy(D1WGh7 zBujdDY(|n!2>rjD0(9&gQ#JniNtu(XFLeCzp|>b`!7AiyC{}>41CsaUY_TI#7M`ZH zUl*R{3y76A71yBv_uPw4c%+l0xS;ExuY;*GRc)L0f!H>)Nuai)lNJ`?8r_VDE=oS=tmnyAVTL1!0cS zx8&j$tv2)7{1Tq!iOe(k^n;vLuc7NVlM-0j10UEH=k55n)LJ96zxeYv_a>MX_oijL z`pD~RVXoh4jO%ZWPV^zjSIlK3!4T}xoiA+d3V$lwF8;1WXrh7(z+vU+wcq%NgCE!g zg4je#>Z6 zSGm)Z+8TxLf}qByze@b=@K$^8u-!-Q4WGtmkB!kt!}i_z=OS!8V{`rRp-uMiwbzJ zO~vC8u8;dZ-om3b_7+2MMfYbzCYk0;_7exGewf6CqNd)R8u4T|K{fszApW0_;J*OG ze?@}-3K0J%B=|1?kuRs_+}VF$Ue91>*RZI@W~0V{CE;0jF=TR9e-S3i2~TNaMa^?g zX?2a}wRSvQoswN;p4v*#U~?IqHB7E)@E`;zy;9PHe}m~iV#0riicf0u;4;V1IYAl6 zoWg&DiZ^K${|pY8Ymsy`EfD0<&dL0LJ%apC&|t)+On%o0a@C=#_jK(aZTUeyZ$>JHP+2Wr6uIJUTCnM$?nKv|mM7lUY1Y{l1rhOxIi z86Ey1;d06yjLsT(ztBH@x3=$SKJ64XN^ZRiT2v)ao?~3Lq$0ZdSm*NdY<|ura~a&;kj+@AyR0XI^;g4h^S^0~3SMgR0R8CdHZ>8<7xLTMe1#pFMBQEX|ZQy*JHq3UGZ2w+$xW>fFSBVb$n_dd6GKhnhfN z6PoV@6I}P!*)+j*ewTKeofgzkufFa^@R_33$iFASylb!g{xq>YMdP0Wk93FMFNLj6 z|6l7P$* zE^w90E){=C#dG+<^ZDU;e|>*Rz$qNZF49b2B`%HfTsTN=T_-LNI_fEVyFA~i7Mo7=_ zYZj4%%@8-epkEaWQH_i*C_GP}y=l#GIEOx)$zt;LdxiLG#a}tuW0^ra?B+sxt2j0l zO(7{YDKwq6c3TUU1LD|=uN&u_YwbAKPqhn5ar&kN4E^xV^3#lxz{)Ln;DpiX3nCB^$uF%aSS(A5YP4=fuvprSM zSKbT4scxzVakucr7M{Yc$Z0J8U$c-J;$K^kEY`&3=S@uNy$1Ln#9_ za!;{lj;7u?aun&4qws#Jzo;AN9}^LkEnL?Xv({~(_n18BBz$wEFU2!9o6FodEzu!; zu?^~pI=jJZ_@{8)6E%K=#|sxEFSh@e!p#ld)U<@C%*8f%KmUKC+x`6i4n6MY|5tRm zpAV{v!`;6XYaktH2ipBbT?vHA@~9gKJP1yiIXp{`L}?4N6k zFwEt4?&}rr*~tEW8Q%>4Wg9Dd_*1h(YT!@BNVPzXQK?aGqg%T2jX>6S1YXA#TP~sdXQzQG@I&PVF_gYzrm$<*^*(6+!Qu}zwSCE0Ti}s{ zt~Rc_4ce|FlNY|A|3O4%)}Fo=*T_Ydfg5$(AGh-QvRI%zAsoU-D=Xhbzsh*`@wSO= zelx`5|m2xrUR#^D6qEe3azVuNslE43lw~f(BUU7chmF&&;dQ+%%pY!3zLcXEM9A3#a zbyMOyIIeRNVDebd4G5{XbZH$LP$S z=v^@A*tTukcG9tJ+qP}nw$&Y{lkV8IJ62;(`giY||ICLwUuLbGs$IMAo_^nRx~lem zo?S`qQkudR4eoN}KdxYJsQaoM2&#>ubu^%%2Y%;vv3pC>=8YB z2r1Cg$DWZZOa$bdk?YGsy@#4Ww4GB%{R}=^){9Zo!d%$%Cc7ezsgR(hCr~N>au)-v zLTl8tdfL^io9F>6P{uwBQI_I7acww~Je76YQY2E#860d>PiT7p$YFBt_5%b*)EV3x z;GRhcF!CY!0z34p2p{K%k*ecf2j>Ed8`&dq4e5Z(-_BBb9RQJ={%o_8az@gfJQihE zsDAy|Bh6H^{ih802$c7x!VNDRg9lV&O<2s`Aaw` z(QW>nX)KcNZv_Cj!`E_4)t^PnQsJZ=I|(il=OYB|v5Ogeh%_pR*IhNz z2)zd*r0zE({jf0g$QaCu=`|_01bFQ8G&HgMiOYgP^2GwV z=}@Ea1NflL9L=xH7(&sg&5e@YArp2gTK`C74zwH|7OpK*oeOoiXhpeFf~%hKw&fj6 z(!44+!6tB^kpK$H62)P?`vAuh2$$cXZUvY229)w(uo%|U`VR}#eEi%kTe!My?#+-6RDDnWu>;UU$oZeLx*;4H^u->++98@uBY^@OU`z*-PK zS~^F(ffpQA_jb17^)A*SDx=rla9{_xRMo8Mb`~7sO@Lqj91%rJYMns~o;8Aa3TuXU z-r>aRFBVd`b#HgPG$c|bzE ze$kxlfxMO3<7~;D7`JfyGhuPV_xQ}~MH??KTvFrojquirle^=Hi?pZ!DLuX?fk7KJ zt7w#9m=iGHrhmOyO<@RS5T&SWmZ@xL>%*ZX!c;sMu-3KGzDvhyaXbmHs+RC7vTjU9 zAoq188MhG=*HB=H#$**`*dH{2mXN{v@&s0O>s8bVv24>QLdHQZa>#YD>hNh%WHQoz zYFSUZU3!q%f358`I&Iqbjg@%a+}>Y%U+hVkbv<3*@wuLfX&9Nd$}g}_iA_~^#!`nc zjuM}g4q0h(zjNI&iYMNXT+2-FMW-Gl)xkaAOX{698bBZTo^rj=r}r}D*JGv}n|tm? zt<0u};8ll^x30KOZzni7%7rsZbEM&s?+n#ARBPo(N}8A7CAi3H@YvA39&?LN ziUZKv1k^-}*iVv+HHIm_7=E*aKY8h%LDEC6@!L4gWdCp!-C+~Ud^56B*Q7m?6#ucQ zPIQv3Xs92^_ucR9YY$td1&_abry_~8K)2IAvCNvb_luXX-tM=}S@#d8i=7}5jAtsdnl zAB=;&FHl}|)HAtW0A>Jvkf4_w{mPdV!Mw4@DlmQ7rYU|%YDb1kysZ*27wa4i^aMbp zzn{OU#}=Fps=3Jl)+!=*z8W_zDF^^mJVgV5igf`{u~?eob(ieLElJKA0RSuZ``tml zy&OsG+yS

IRK(^}M(f1pi}LeQ;RW`O}i9#Z`X)I9_&~G}bC_^C0sTht-1w`+j)R ziYZCm;IIsIRV)1`h#Ws85;5ceov*V1oa%5s#LNX@6T)@|ega+0mP;3pJ@JzU2CK}7k zwbA#xuuJ)Ljc?EuseP!2RNap#T|-8`7#T!kvRJ_ytbLzPs=d@^{Tg0U3O{v-hV!Z@ zlue?ZyNsqqVYMsb#$(LS?)~;w^dP591Nm7j{%1y@_W2Ru?tqD}cP59HkV~Ws; zd9+KTlWWrgC#msbVorus#hnF#7hIQufbGzOwz%q%DXSR0}?zXOAp8mnHczUo#7(~9HD$FZJjeM-H?I&C&65FxQrI?deipuAjzimZa>}l z?)hg@m-WIsd9UN)JY~?>*aOMA?LCsVR_H*#ODQF5B-Q z@9}L`iQC+M^QPE9`?m80?b$oRZu5xTZ^WJ7oEGp8GjJTh!g#eYlk>*-RG4m(0h>JM zr1hpDZAR@TtHVxBir-TPPzRXeqSQLLB-Q74wy|N)p2l8?)ydugTdO{cfSJUdsiEwB{VcogH&o+7l+X@1d{rJM4r;9i|nX*1qOl zp`?mIlBH;ZNA^CL=8l%waD(8u7uI#7bA-2bAAxG5*8VxfP)LohTkeE~8UItf+<9*8 zZworDKzL#f!M3~k%}bku_~*>+U3rt$YO%*!e)xmW+T815Qg|C)`$?+U@&Eo4jHGor!Fu{yh`&527aCZMt|Ws4CJdRLb&i*W)lb9F9q0tq{LdkB(^6MGvvm-AAo za~6WshW<@yEb#!gW}HU`%p8kgh^y1`Wqj!DJ>nWNY?8B(UGd4Q*a6b}JHos}%p zYFx)iT(zHsdmxP=Xu3}az@^|?k z5NxH0TCIa^$AqDCW84uYS*blI0H;w-icMAt#`};PD*Jx+oiu*e$GpX0wc#1S#qb~A zf9k2%r}AZqBS=)cw%CbynctrHv1ZwX$=tn=k>R9wXh2L3M@pAPrIYY(!EMG!;if9$ zN?L(^bLtXhPr2m|mrNVw_6(axfSod{wE-CF%+#av!m(RswaCn*pj#87ODQLmM@vj^ z!Y-xF=5TClb=RT|a;U$HdW_+c+~tnB8x^0+w*UY>>NC-aE|UCvu?E0-Vd+AUrK^je z2PJ7(W8vvUkhQ_p1kFuZApZyPn2n_!fyhX4r3#8AA6jnX_RSx+RCJZi^3|T}JNkek zSJ~OGPyouT(m+-FWsIUFuE}1aaHU;6KM+J3LLluh__pU}Yi-@A(|4$#JG=L6H)|9w zr)4ew8&GOFL(g7i<0?(?bId^$3E2x}7!65iazvaAnJ_qzUoA~7t!%Ol;1levKBydt z9;f}`4I1MMI@kRPPll^3+Hx;KuTW#e@i8^d7PZ5b%ooroq2c`&<#*4H zk$no7=WhCbB9feaaU`Fd-ZLoQLPgDPT-tgWFyH1<4ej;VkoO88$HQd&T!SU828S z@%PH1JCJ1ps)zrr>Kg`BC%6VBPJBYQsNowt@tM?m4vj#Q{66tLkAWi!SiofXuUFm_ zME}3e0s}xz!8uUVYQUu2l`rNCjIFmNhmP2rv{UL7#19On`+^#-i!-)DohQ*0A?H(N zH4s1wgNG`IgfV)%`a_Fbc|4zu*Sx$$)|vmO7#dB*!E97j!F|j@z5JrHWv%^bm+QDm zvrW>>EnKp?tE9t7OXFVhooL4n1WExy0?5ry z|43ykKhpE6k2I#{Bc-h~`hJ!+RS(E%HjPF{czVX%OZ!-bc2dlsqZ!StX0qSuPK2`N z?`gHPIm#OVH^=>X46vpzJ4rXpedvRg97rb?XuKRSMqu4w{jU&`>=@*<6J=zk4l_SU zi>+ObysNyhupg=xkKa48xzPlcq@??V>sYI^(bKA?1ZVc#SDuxO{x0|3zs7bz47GP; zB-D9FSlph$J|sv1a#A(vWy@Ar-tyBb=z~70$pE@-q&A)(=~$&slg=M$mjl%;X`ZNa zUG&(0GT`xj!yKix+;~yrA|0SQ(?!qCvp-O!Fe|j*@T5TG+2}Bw5q(3i(7tyUpTzFlElv#ro|Dy#&qys+fRyp&dR z3O?(5b8bDPcAqEtVsVCoF<0E(Pv~VUn;1O7L6e48fZ#HX8!3SOT<0w6pnbqixLd$6 zkSw?S;=*OvI>zNPi3=5WLzMeZ$DLr*Z5fX@vRIf?nf<2P3Z@!ZqiKJk^q9H+rrOWf z@ki~Zs$OVGt?98c$ED+ogzARIyd7fqVj*T-W$$t!sY|1f#L8{|A2+hhHvs>4t|XU& z2kaUDvpGiIi_|eyza#>Xa23v0G+ViNjzMaVYA|U zIc9>DPi^?d;=tk;2E^{=FDN&gHhb)YYv=9pdVpYP2pAj6q#_N2A5MSPYG~xX&u40= z7V0SY+i*NqFD+L7KMVI6w>Q4U{7N$31u1v@6i42&Q}=0UCp0wQRaFWq%l>CYha$=# zKdjHhDu)<0$){Smx33!b7EPsPTG(WR!BSU@QzR?N7V6UWd~ZlQ6z)6_kzn{6JbOb1 z+PV6fWw^r+n88EGPN*<~=3Y0;n#}oLM z#Y;NtY8hR(s37-{rri~ICVYkgNj1p_6it{eUmA-xCy(aT(o}6*^O-<{*_v!qWf|VA z_bHfBHi4a%8&`K5n*(WgLrS@*F*$Uk+XKXc$uGxwMzqccE) z+{Z3o`L8QvPu7hyyj%9p0XA_Lp>rJTK3RgYq|XQoY)4Vo7z>E^$iGY28W@<}q&9j0 z0FbojKx_Q0qMWyFT@nxCuZe!T)~ku;bg8DC_qD%}`w&Q{wg8O+(~|fIRHseJ3`wR< z$*B5@4e5TTE=TgQvhLs3WI2vxLAVc$_d^w>4lt&4q0irPQkua%?hH2}8&0pJ#n z(hgl0H2}VO6u>vHO;hVw64y!Duqi3*!rJznoJZmuT$>#zV_OoI;p>>s&Nxhqd8 z{*3^sQM~JFV#0@dBDYxT{4cLRPb84$w*6~+PoskFQ){V1Chz}5XN~YBpe)X`DQ1kU zTYPPmg_b6n)cPt3!;nAaApeS41{m1}?eP6gaAj684zs@2_%wadv||7{fzo_rf9Sno zBFLhsK)x)OfmQ_1aHz=o%c^96yQ=!e)ty%f3PV8zlRQv6Yd9o#V;BOu zwWUB3l3md|v(MjHpSaAKMoCN%z#g+t{efw9!GsHXC9@p+&aAO2Rd`z4B??D45?>F!DJo7>nceC14-GJuQ9(>L@y^* zfL2PS>zxitPRPHDHdKkkg-$h8KFuNZBr|%)1pJ5>Ur*jAk8)}}h1!xH;Fl0OmDH)x za=(=P;s8Lw=8zhIJ!J_IKn@Dn)ns@J{;M*Fw0SL^5xk>3Det8Ac?~|ng%E&5(nI=2VwHQ)9M4ULFxmQDv{Cg4#u#$9ficVwSPYg;U8X{a z$}1S_OdyMEG@+CAgwo*)M_%F~qns^NU3B6>TINcCk;MqsAbP7uS;Ue{mN^zQ><}7F z$^}F<>~Lm`C>?6{ySDV)#4&%wRalyu{Jq2`Vws{%2bC0=-s-x>s4*+asF5%m*Xjc> z%Qa@N`MjH5)Si_pQ*Q=RvFI#M?)B^Pwmk1ljxImSQkLjCy=G(|0^^4jXT8?)%fBve z2^H`2Pv_Z1t|D6rHNTXl!aoZ4Y6R^YwU!~Xk?wj+1_Eeq+x6`(0i?0d`LA%$dMg{# z5r``#fvv46`tFS8tVCt(`rxBHvuYQ$7umuF1vdWrST%Qzk&Tuif7za{jW$dtTQcB( z-hM+MD%|{;!gb_AZC$lP&aB)SH$Dt2L*~5zb)tFpjD9IBEWNm1znFXF^C0&dU%hkZ z{KP}zS9ySg=A7aA3GkK{-lsp~+-Rmm_vgq9^>^G=6~+o|ymg1WNtV2+7+r2*5I3^B zg@gRQkaYT)BKn!pv1}~+!BK@8FSxWw1DOTJgJkuWSRl=8GT^f%oUD;8X0l`_fk^Y; z141)O^zso}V`hg)OGIfw2xQ62XPY5!u;VPSN}$o>eC1=UW(|oi_m-kGkz_{WxUnL~ z+kXAnV+vA;(<%+oN-x5dt)1)jcUXBCU#S)K(;Z_6 zQZY+IyHEWW2>=Egjhv78sPZHcuj$`Kv#Ds02h&Ne3u5~X(yR`f-2ZNLo0oD0n(I$Kk_v|ldH2x;>yN>O zK~$N>di8@H8gAcuee#_@DsKwSsb`S7l5olkmu5Ro+r0%rD{HJeQ8_s)tE{3pjZ{}0 zK-3d}F=>V~_nVF3KfdI$lx|ZhIGe6y*a+O?0GlbNS$XS(&l&P+*mk zuKXO8*KK#PPF@(JB=AMwRH(3TWwDhsRC-3ZCAFjZU`Ns5HJNAi*e5a=;gYp<7g1qaRp7s<)KO*2 z;f}U$Ic>REN=)hlELpN{ItIi#{x)eeGcB`CP^bsefyW7Mn7lMmlPu+~Y52 zqKxXV_8V-PproV0Znw3cTl}tegqJ)3j?3)U%9pf85sVya$!j_69*bfCVcZk7U6b-8 zZKr53>X$T!iAvNIBE0iPd{NmjS2ZkblE&dP)Z|WX!?!H$I9!syj{KwgTk^jO1@uAl+~O39 zyIthb70tt^Hu7Ys&XAA9#=T=Jlh%9JLrMm#vs8u@DFOB)arsErKN7JNaYB4e3gBa@ zlF9Er+YQL2OoZ~m;Wl%0WxXbIjd!x93}A^Oji^IRyY&2mj0ZiJiCFWJ6$6b1!#tO? zkdyrq!jpC%unzKDsS24?_(6amtVslM+_d!I$B|@aT=4u*Tn6kawV;V8Ii55tvUc!1zAVA-Qq?j%Qrsy3pP|4C2}I>+ysO33{}xz%>Ij$?XHPuT&Z6OP zN}gjJU|0tqu*xmq4 z0^)u(A72Kow(sm)RZ9B_Jtp90(nz@DMk5`tx>e!hlk@J#x3B2in=Mc!bh8AfZR~Bu zORwBs%bDsmjEpXN7=Uoy0}qnB<)%w*^3<61Eq|a^@)aOSR5TDH`#cvZHIx1J+%S|5>Rt$MH8nOSjn{r6}btI_OXB_Um z|635-RLZ17=>T|*7sM9R!X2m*)S9(=@>NtuP0l=8WH4gOH>|1E=`$Rts{U2<{Hsur z`=~f$wBeQLL^H0@qDNF#Wo`ga))MrXogt){vAXR!&wB%EGtkbxrN=P<3b<7oA7k+s zsuT~${fM&ejEpmWiAAj&pP}T8sk1BHB7CO9$#fspm%hpg>asQMK-!I4DrD2Yr)yj@ zvz98a88Z*W^K2eDXCh@MckBzH(%nY~6`KI2>G{?*wagx{55WTVA<4i# z1l@IUIpw=cR7OTdZCez@E5+)aPvFDqCYOho09pwJ&Jk^z>!K6K;pA<4wi4rVv0*( zY!OyfmGoz;71Wd_&Z@R^rB12VKUt`B7cFhe)1I`g=gN>hS-gF$vMgLqp!6T1n$>>T zwsN8Mbnt+c3j}?Drsu5lQ)Y~g64pCS%+v2~(CK#40xPw$tA6o~PAMPl&}cl-{#9(g z(|PrbNxz*MRK4skdg)p16@T^QFY%k>0%8Rn#d^?v9$t631I08%H^rceq6!fI#$=>m0Fopgi zJdQf*MQYEkv-tqKv)+TNXyceRkX-FN z)KoGv9R8}nb+qMA$0f9`e|E)W{4nkYeYX4EaUR|6tokIp#QzQEZOvS&8M4{lOj(h{ zHP5RwI>S<))9#&}RP!t+k_CaP0#0<3uRxju`ly39p%UY=>V|f;ukIsy8)Ybm$ONrK zI{^K!Zl(Q>PZErRL6_t|4Y2_t9?LH2RtHigtRCl$5ImV7C*p@J*ra?>2cRl(!B zC1!z=&r^HUBQ?LbZhv@kR$qhV(CmbdLHDU$X_DyD4??OS`dLMUrTkIBm>N7~oOcUZMl0+6E7f?5D0Lxd4Fu!GtTg85dpIq6fkb?Aany~KQTL(aWOTap*qAac83Q%)QQ5x${sU1tIgQSxnT3#e*TrI!mx%Y3_;_r{VDcFcuoB^chg}?u0TDdMh6HE-)09>`bOGj~Eo_dX zaezT{HC9!0x8(>gOvnY95Yo2;M7`SlcNvKaIsjH9hq#>MgR!AMhtGK6czc_UaXI$~ zV^!V!fF2mRs$0+jJ~Rst@czW>ImY#eOvf89TR41-Huh(JI=(r1I==Xs0XK0?GG`Ne z>vQn0(mAhV&i~>Se#jtP|LrQC5+x6;$+y>PIk#nI9Ot~)x&9Z^MKFHMep^GBjMuR? z1MPB9O%aGJLGk|%Q20L>>tjMTWi3Y+m2rVPa1x{2saLPH`x}!_H|ow0X7A6m zi2&$Bp;0BwjNlMDmjvb)aGI`bWcjC-qB#_3Lg~vFMJ2hM0anacfavS;daw>q+&t}P4K9NESm>)n5QULKD(?&BT^yg3*HPE_0;s4Szk zzlu**E3fZoNvX+c=ZcWLjK2kpx(!^Ab-T`{r|oP19wF1fv!j2H(2s3?Ix$Y*>6_s4 z>IJ%dZ@FWrexs*DO9ez1_7BnbL%h@R6{(L?su7$fJ90K9S1&wD1|GS##MMS#;Ay#v z_2@1AwE_gu`M#kn@;V6+?Hsq1bzcvFKzBp~2ee1eo_SR!5P$=^dg3dePH~deIk~8b z_fIrwRt)r^qP`9jTIvs;9m{Q!cFd>^Zz2j1!86N?nv|jUj9(I%7)*pvS(xDo139CuptCJrNINmV|{GMM?oKqv3WKcSWx@rIxPn8gzRusFC7$d_AL zVDj|_P7rrs3fA4I>Az7ONGo+}Zpj?F!h0eYN@>h3U~X>B460(7Fp}fPTtI{L1;P7> zPn1)@3_Mqdo7fqROR!(q^9@N?DN@bUv#tfA%tXj@Nq*9Jlg-WUKw|FQo1QqL0m#c) zq$dZ#lkwRdN;6i{6DlemA&)gxvF+DGNAgtgM~FZx3(y^b3*II4{~ zSwTCIVW6gKHvhX)n`<+SHPqbP9b-?q7-eB09pK@o5t&WY$IHksyf^LZ={5s~-H}cH zC#&%YNghmL{y}*-prnlstemH%~C@$PT&kmH&^lHs2L;)hNHH2!tpm(LI3eNW9@@yOS<9;ycXU>Mx!wN<&f5Pl4}_-jk*0@U3I6^t_6Iu*1@KUW zeF8{G=YsB)VM$|Am$N zaLh<&=nOs$>JB33hWOGhZ<(y$`#;#~Naxmi4Up)~)85*5I@U<8&rsCk*F!rnS|3FT zJF!X9NfCzRvecmD7Tl1Dqrwpw4R+K(i zo$Rc26b93>c7G6}9tDhbh72~E2B-iwwcE;j&pbD#iN6xSrB+*c?@%d-uIRY<4R8%> zF8mE?zKg4FJPtIbS&En~nU?dTDd?}fr{B>>JwzhV9c3dQ_=<)BlT=m1GhMUy-1u7< zv^A8n4+g;CG^1CbRw~=xR@E&2YHx3kAvKX%)9_qdwBO=b#L`aoT6a@DquxcbXi*la zemUG%`i{~#574*W#OiL&08i#6-q%}>dZR0=&YmnC-A)4<(Q}c9zP!is2fSJYR8;J_ z-%;K>JxjbW)^Vo+Bej=SBpSUGZ}1`^#WY*kTQ+mzSLD+3_$`ic4(*Sl0Dn{CtLCre zdUatST=y5i0P)t=6a(Wxm$Y#Df7p3wqtn14Jx_AwZnN*Sm7Tvj6%ae%1rD^%XdHrX&Em z$9*Z^K5o}$fNukPcq!U*ZWNz&b*zi*@vdN)Gs1Ag2#>5Q=LQgWI!St3YF`OWOo1|q zPv3{g)Rp5HznXJ{M4E5sR6^vhG{bg|$c8vqTR>cfOG1DbTfmm7!)tj>mDI7G1T!zp zR9QL9tDC%I1m~Y}+f+KFHVGU}QEfqh@kiVe)Rn3GNywDfT2Gsy*qBXRU9Jas!Rv^} zVQNdBgR}@$JiCy2hr_CJmIyZlwX2BDZtsT&;c^>Awxs7}5W+E*svzvT>d9yjR9R&1 zAiRq25E#qgN+`X88CYa!q4LJcYvA^7I@`kVkjM{3Wc3J4utNF=4*!q~HJWT^i>6Mp)dUue9p7i>kW_Y0ISygo6 zDh*veV6Y$s^&Y6Zq;e6UC_)fYlo?iQx}XV`+jo|gl}%J_p@i2{g7H`wC`1j-YBef| z0AEor&<74jvTcl=7S*%mgGT++0{kN^?fQsT5->BvseOaC+7vA9=+z8uL-|m}H9Pov zsy@q#9Cu1vlqt#)>EJopew!gS3r0zSZ$JBlpB-cGE?j6qxOWDX8r}+3CeC(vxQ3p$IW`a zQHrz!ge+l~IvtM5U>bSK`kV~~(Il4~5d#{7LOXuDUy*s^5dlLZ78T}e{Djx^%9}xx z^Yo-&mo#AWW)9nNo+#`Y7>}$bF?qt2!`JjV| zhDg_(MSoZmXnL~}(NWFn9gyc)z?c(T-(o$@ol=4=loEr1p371E>vq&afqF2oSsM*@ zlGFAB&0zOkspHn@LA;!M@I|%81G8NaeubocLD92H)_hCEcXoj-LxNq3W^4y;!Nmpo65-wFyYMcH0a(Xt?Y< z4LHNuFU;=&XJ2=|y`kq1-RC@MDu$W$n4^o}%G5*M>hhZF1=H?S83QCUBatyHUD}hd z{wH&Loco67{vh-DkRZg*Pw^}+2War~xYvU^Px(t=-$~?C|8yb0NyYsjLza0klH5fK z_Coh>$-i1)*W4%m4Vn9>RDBS6waIsm5{Et_qEtIXK1p1b$Vg82N&X@J8>oinN1*K! z(xKKNlkN2}+)-=>)=$ap?(}|;zCfB)nkcT#VK6O8J?k?ADh|$Bi=$BrS+5Q`tO`Abl~ks#l@=f}C}7=? z_X#c;kcs}1lxD{l)ltYJNbCkeT<>=|?K4_-N)P;-=APKy12%zi-^~9H5w3w3KGKTE zrdxK}U^-gIKsP}OCs2rj=-KgK?g9jKZ0G9- z4qwR6@Y$cbOR5ABD12Sz; zuna}nVMoBp$+OW99+>nOgd?(|g>4zR|2Lk%ZA_AXVNSFr_fVDqtHnMBiEbk+TH_Eh zR$^SXS35vMS?{DL#9_O&A&W+7PVzn8Ot+&nuqSUBEz!u=dg2A*gKt@Uuc}nY6)4qU zwttGN%c1Xg15S{jew(;X+Tv#9>j4}iq7W^j8{saqg6fNuxtv;vX8@`Y>FGW>T#uur z)iUo&eqyF(3}wpHL9TCn(|pGQQFjm$B@V$gogdr(hp&7YToUV(zTvJ-qxx@)^gt9a zE?eb05O%+qzeWw(bmw*lHP#RvO8ryBF8=50%gOhVRq_-kV#;d@vo|HIC3%gK=E^*O z6Q=rH1WEGi&3{Ytew}_RaMQ?o)I5`Cz4+~OQr_>nhQ8m1`zx-OGR)dfvoYyAt=g8wF8ar?`pa_P&c(XJibTr()m3XH#P==0yOj{`jR`AM` zEz}*if!oVLt0(A7j#aOJ{V?NEo{TpZW%R1ofA9FKk_-iG-{AqY`2RHG*=Aeuh)*j6 zw$mpa#l^dI7r(zM+`1gU#@`k5 zbfNu3aaP)kui1{cnj-W4I7rU@27Uu;`6kyi%Y>wnsGKyvCj?LYQ)Twgw-ffnTDa(+ zAbrSkAi%)CfP?3nYk-yDnnfP0p1+QQXJHsJ4H+4CA%Qj{);gds6;v;htr1FM6yKz$$(?5Dpne_5!oJ$~WMGO!xeXz`&IYiSzU9htneb_mxX~h-peR*Hb%4FVJuR*3DdAE zHKF=oxyDNhQD#=ej8I>%n4NS{W`5eForYG=zEY2KW`3tgPx+A@`<=0&Zd=kGnQI~J-Ppfn8Mn@rp z2bT;!UJ``g_s=CPq7D+KMax1lV?UgFvEmsHb=V{Nw{9d%!>USH103=bwWf4@7jH z%X(K)XFq;Yz=%h|06s>1L3eI-Kgo733y7ABO>|#tML(uFr-j`(-^8_Fz&RJQdIvHS zT#c+at7qGrk=lJJ!_h}LZ>8M^ySx{2hmfz1A} zgbc-HAz4=P_n!(fj68Rj|0-7rj~f0}z&>4eol85Jo#;!6CIU%Ff4nCFaK_BPt2&6# zZ6#SY`@Vq;;~UK&Txi^_E*V|4SD@^nfPrxwRImJ}@_kt9No*YtLC zjlhL`KZpEkts6JbR@{+}`CKNh3rR)?4Piou<#@f#I`e_eI=t>K?PO?AE;q*&DiYU)XoJHtuEBpTKU&#(b!&6EIJYkUbouX^_$u*xK!Q-}Be;2@^G9%Vs%|L0 z9=bc}h#AMTh}Aj$4=WrL8NH$AU3yez(bC5HUu@oBy^YL@-qlP+_mgJ`4%Af6W_Iyf)rhk_FxMcD&$d-04N zDdG}WwztLQ{_P0b>^X-(n-_t1v@ed*~xTgAlvWiiiBC- z>j<}js%L(lJAV5iHWf*UX|r7uc`aHMZpoe6T zmJx5=@J~JNUGBsvQ!e37PO-we5ysDtQ#v@TQ81Gul z^`TBJEAVqZ;pNOx!8t^5fpSr_!{>Gt;LeJXf0P(pgmM04K+Ex8v`zm3IUph0`W#S? z0(26$D#;p9hemOtLH;6>xbjwnG}Pw{!I+qGzh^MpE)vk~VzUJ`#p9_-2dlZK!^~(~Yj)=y&hOmIl#~#s16K#wZbi;H9YAe-mQ!hO2i*{-{j=~ANV8I_ z4o5$JXTLUve*F}u9Tag=pUq?y_W^cxt2Uf5K3*ya2T$5_jSin#Q?z#d5$ozm-SRSy zor#7mfjcKlZF^-@8yNam_)~ER5WY5Q%o%sawFCuoi>1v366a65KiW0mVr8z-v*LhCqBu0}s0e%hQRKsy7-WO>m@^ z=qiJyIxpe_Z}pDBhUu$B4@X$x2I?uyaod5Z1zc>MY%kA zT4M=G>|63K#TFg?2>egIBdd|UY~%bY+zR%NH;@w0q5yfQ%H1OJIe$n*#c|J~#J<>6 z{NE+Xv&58E(x%HtG76u_%P7E4)2^^U1nNRhjfuhujb#NrnV`-h`Y%^poaaOC3J$Ed zcR;CR5wyMx@%;v~Y@22Zf_6QNwiS%{++>o?5e>h%)YH|smuNe{a7=4#(9?I|b!rHD zb9S(0Ufx7cY>X-dj{mtyy9*B+$!M}x^U&{Y=oKdDo2Ho=q)}bb<{TBsJ(@7#dcze} z7C6)Qi3v<nps)0YzR#aix3ko zP~$5aoS|*#g!sw2!pa%U73U41XhwmHrHb(WB}C;2ucI) zD2Bg=ZNqPl808>=fDE3+`V-2K3W4&cNFCF8nhmG`nXB0VDv&vv4a`d()7hF0qyU*E zPzPkDKpl`70(BCCK~C>v+K2audrwj|6Mp6~Fa0TDk(vb)e&x~MG&3grD1a;hC`El! zih!Oi$t9Ah*F3rxqxCah6BS~;k@W#OMSjzCned{BjQc-ienDS*J$Ij~Qt|J+UwLc_ zj|#rNz7DzOjnna%^`(f7{omPui`X$8huHutkg*(+RTs7pu-myjnQmpt-e$R!EWe&& z8J!7=fxrJ>jD2-jltCBo23<>cNjFHhpdgJP-637lNV+JZfTVPZG)u=WDK4eJ0@97r zC7n`wU%&6U&%MvRf86`enVECWd)|%rotg7HXJ*RHO7Ik@0$ls~zo?KiO)^ns>n33j zv+PALaOD?C8dE=nQRCr~s;#9K;ZPTy#Ocbo5hke(=s)@vSN!5%gVgb1f_Yv+G&giq z|53ra5mvQod+ySj$nZ&O){zJqH>$Y5d0Zca;EYHH@6c36iA!G@H?LOT$wk~j{YH!N zjq*92J>SVaRFI5Yx}H@+Hm9I_e?FaQ*~MN_(@|f{7~~k_)+$V~>?+Q)oa`iF?P|Q1 z_J0;(*+#txjOzSUr2rr6`8+5!Q*6xeKgTjdiCc z?Ao!lth?)wibnPK(uOR-6PVEFBT7r9Je!M^aoBfnOTkq$${gb=Hp}mmSjC6;LBL|Z z@Ew(yCr)6Am)}_>31j`&W(~BIe&?SyA+ownMB$@cF9)bapQ0N=KKHVx7ec!)=Z)b5 z)zgWhC3C-h88Jut+n0#V8SW2B${A|2tpdNHpMSn>c9=(a%=Nm)H8?JmRS!@<)Uikr zEY3r*S!CMHzw)sA7+fh~j$dDs6h#=jS()$BIT*89neEaU3l!EzYqpD)M0y zrZHS;M-`KTGGTQ0_?KMwcelQgb*~`=O2uUB<@I=%p{hy_%N7sB!>>s9)bBmf$4#?b z!hu>%sdP=fG^lCELv$D7em#f^B191vB#plF-ooJOCbhX!L?Y|QbwGPj8WykeL(k)| zLZYQ_&WB@!Hf+MWp{&glyREBG0$Qw=uUwS2J?ketG^QCD?RxTpL2n#Qj;v96zS1v` z@h>Toz9{YEzlMB~=EW|oJM*1{k9##3Cd!Z&k4M2?TMf@e$O(EH&~o%WP6v zG22K}kosm7wwZ2n!-0=%Mxjgss>~deYe!C%0q-sFzojo*MB0|xzfHz&LhxlOvtE+p z^BBm!iFx?IhTtxY_w2N2^toVIXVcNuIB=dY;a^Z#3DDptz1i4MBm66nVe~qK`k+~5 zGBJZ%(Z>9DnCr@E$(!&0d*kL6yFROpd5f?c8)pD;nwOw_C&)mPWlb7BZf){K9N~{q z9!R0=DR_5-)oRk02a*jSFf_s9m^{O?`}&yEyC||iMya<)BOuCs*@+VLvVkRylb`Q#Pw7V!wF6j80|~}H?Bc7KDKBYV8bok4#;N^4s42L zRYlQG`o>WRD#IispLX>}0?_?NQTL->iR68GaXO=}UqcQ<+U*J2KhQz;qUyUhXb0}I zlAXkMuHq-7y^c$zoD|+n=^gW7)^9o2hDLAd93Fc0q}Menwd0Dmx6xwG_B zBOuQFaO_#C^U_`5vPIoM607{p0ACKFe#frqJ10TnQqE%YQA)>?Z{HAPm1RDEetxJI*O)(aj%0<_~9gVyL8c3{2Uv+j2eY zBY)RF4t(BsQE!81%Hkr(ygOmq{q6BQG2_3%Ny~p;i3VH@%T$`d8T_VHbdgL0tR2#q zW%rgs-Ol&5(`?QNm0o1gw7y{(5= zCt%5kYuWw}1hl)JZsOuq`KRN~jRp$;DsbM}wV(-q-z*@ptE+rIr^fx9vo+3@(2bE* z9WGgJq5FDfKzMofBE-T-Ghp1Bu7?Hw0?6Y%P`~j`eP`(LR&3gEE7WaKdsA4_(N{?t zK4i7RHTq%=bx##Yot5fr8cI=&q(oeVhi&x`O?eP=7 z{p$L=@Xt5VDx9^&t|<50I^ez0bw7~v4y8ollrbwFY|vtTN`K_lS_Zz_fN>&Pc47jxCNU%E{D)oKNN1fpZ)HOv1-W+9e7Tiw$V91{(xa_q8B2Y z>kaP5tHplb0G2p)(0NcGjB6(&z1r}NO$Dd;-ruZZk+HtNboF{d=&TuU?D>6tY2jBS zWuaH}9AupsL2qR*?D2?Y2NgtKl|+d{MS?+5<2hzPh8Wp~{>YQEh)IH!2z^W(KYt&gXGgY|cs?HNgR z(eQqxa!RCX4ROklw6AB9gFuS=YmN`8mJA$po$K?g107s5U22czTLD$7L8P)~eY86R zN7m)$HNikjv)qyAYmS~DmImxuG3VeBcr^?(__dlig(&2-a#iLzVDx?PX-@yd;6HOG zn}9h+i5VPTJH;J9X~^d^w;VL_S9Py()E@Kj0(&!nbB zr1r4b%b?x$E=~DG2xHVEl)Y$tz;YeK(s($8q5<9>bao;#6XuXY%!x zOk&MN^w;S6C~Tq)j7&yQRvV88^a^AklalZXUa!JSz;4Ur3~^{>RISjbc|%q=Neyuz z!BTT`n^d(UEGQI#tkdjJzL_c}L`jZH7Rb|QLA99s%Xsz(CNXlmyacC}Ze=|06_f5L zvU%HH7_|0bpuX*qP1w?!IuP!%zeuGe|;7IP2Z&f ztjH(Of(?T9EPO`$y<& zNsYWu`5>3@r-IQhAq#0KqQ49$Jn&p_d1OT7u$>P}# zqT(KvEG>XMjtdaY=*KWDD#g~GV4LPj+bA_E-JW>$>>2LjIL*uK7}l@y7 zJA)5lmR~>@2jrS;tV~KZg{X#*ie?ipc4B1AY|s%+swPwA{F3O5{8LaJcfPsMS2Z6a z6qpi37ne-~$5jP+a6M*9lN}_wBH4S|LQX-x=w-HUl!L5Y`7|4bGu_ut_&4UINFN!?6JoP`@|NtQndqP63vn|@Ydm1j0y`s zi6h9^h*o`r!3D@+`ebYQ(UJ;eFla&f)f&r}D07hDOiG}J8^W-Ds19z0>oAM^x9Rcl zi)ah9kg!<}J9@rNxS6m{*AVklty+wy%-CA@tzTG1dqN}6*-0dxx}WLUa#U*=2p`2! zz7Xu7r)ts)GbPrvcx3}esE0SpI!*S=(U-0W)KlhAaxY`*OJ*QS_Az}82lI?5RxLN9 zFgXg=cFd*BV6S-t*jEm&X=;~uZ^d{(`q7vu9_e_4^{cLqQc*M04`xb8O|l)ui$8kv zDW82(Bi>|W&>L{m&$-caW5RiYo&@NDQNdX!Vqx$I&xnd!PSjP&N!{#b#vu2z92-92 zgnvxMe@x0bfZ6PDBgywX^&ivZAM?dO<}Z&a*hWAno0+?iGYoZ<;{a^!SCn^*pa_cq)y{a}&Tn8XzTGp86}{`mlOq2Dw& z0xm$O2UINzvESdml=-Oq#ZnRZ2YQv;E=V@8EUE7hvk;i9n4rg2%jlXG)i_k(Q0U0Q zsj73TB^V@V5LY?N1cfa|*k#*9z<-7@$REPM-sC3fIzy(don9kSdLjys3Q=`Fj#;9g z?B$N_BZEP@W;z%hM8^?Rk?@PLpDmQ zcYjlax5y7Uwnk13Q74qTJAcZ|O4-wVxy0vMR(cNd&%(}0cTeHlU=KVK#K}yKbc+lF zD?K2be6R=6%jyhO!@1x#TQ$ZG(U}v(J;sz_3t2S4do9><-epA~4cw)ddSLKqg;;7* zC1WwMg8b>g%kHUjEl>*w^`~Vf&_Gd0XJ8il^0*@j|5T0DCSHqw*6Xyd?isDvi)}-Z zM&q?so03QSqRo-dGg=LOx@Su;i#VNDn@)X9(?#)~4dF5)5M)tLZ^pP<_5-%==huO#92s zgNfvH_0Qr*qj1;d`pD-{*y#OnWF#(R28S8+-W>`{gSs)iD6i6AKtI~Zn#W=06PuDe z(rc|kMZO)3KoZLv0w;ehe-Z@_Xig*!V|bxQeOLlWZvIJ1>i~&woTmXnTD-@NzsK?d z`ZZh&nwWQd3kVtzo-@P{A!2zR<(qNzBS)`LTgSIA8D8v#onU;~8-@WhnmR$Ds_;Fp zW^^-Pvp9&dSp3iL5*f}vQcf)RN8Ub>o^LvSQFc}*k+q;68Y4+BmVtW^n57xb8u#;W z2Drb;^-)=@rfR^^J{1j4b+_gcW~t3iI7aNy&SWQa!()3Ro0uwn$OHX83>;%|;26F_ z(|({ooEv?vpx^Kjs&v{ z4vQY_8n8X3<9jRiI)2QA1dfyQT~Ee=9x$-R>Rxw66n{$hYM9X__dBUajq+Mpv~42= z{kJFuR`cJ)qDz{Ir`*u1iEPrqV`C^OUVaNwCmF7zNNZ`UkDsvr|MB&HD zcf*_nvl@84-VJ;OQjCXvM8ii1RYUDh3K&ZBl!#R4S%OV4lai5SofPhyc8(CEyQvxy=1<_X9y*oQWUu_2 zL%6l#)6x`(82p5X1gkwO4XlJrwI+K=rHi0sWjlU#{`Vsq*^Ov>HY?x&x6xjRqHV?Z z7wH?jFKX~)0_$FB-seU$aVxk}HtUN5H`|J>16nlZc)2*yW2Ta?6dwX&*J&*(yhH0= zzOAw6W@S{8P{tDg6?(oRZ4vWqLY{w+o4~P%f6yxC>3x1vCMIb8y>#`je<>%cYiHp| zQ=RpMQ9<5F6IL%QjwEdQZO{a^^tWXo97*-W+5GQ`pW6eB!q)9+q?%}pAeq^!q<(QC z(BYT>9nK1)t16eQ6DjZRtQuy?{vsGhxUxVnSu5fVY1@ zC*}QW!){s%Co3FgL12&c{1C$nj9}~L;Q@kh9N5uGPpUw&9#;`5IgI#6?`zfU+ZnXZ z4~(-bWq!&NP}q|}%$4N{d?qgMAOhr^@l%P!BA?7R4BRJv{G${brWW))rPIivvT1P4 zlYQbA1-_$-0AW~|+rF>a#u-b$CgLZ#vHKlY1KVD+m7%j5k3NdYH7&#|OPTi!m~`UX z(&^F>OKKguzLXcF#%k+NIYY{PD=Sd2mXp#_zIj2_lxXt*E}kfdwg!4p+eH6b?1+56 z7gQ!0(c!lCty1z2lu>wu>BZgZc&nM)+MVwl!^UOook>K{+}g%Ym!jws<(l}* zy&mLo{>rSMlr{2r&4}T_|6Ld`e5}dKK{ikOdqv1ae5|oQ$$zPq=>h!nuP*oA1+mjh z9x>THRJ_CBec0don;`P(2<;d(kifu!Q{36|{udqvfwJY}O!d+3VWv4CBFin}i|dt0 za4g%cvML?XN_j>16Si(j2Igay7|m1upjpQse+zMM=wHIINGkDXl=+krAz`1U(e8TA zO?$I(^pU(AG0PB*Q)!zsZWlQOkL&fcGIR~c+H-~B_f!*AiLkn+dzQ0~L$*)M;k{G3 zDr9dB&Ylo8*uW`}9ncK5>ZG0gPCIMe`pH`>p|_5AxW242&+*?z+;REV%|4fVn-Td6 z|8ER7A5;=$)gNb2CO(!@AO+T8=Ct!AD&6#m3$E(3Dsc$j^m_--@V^Wy## zW+8!(D|TqdKA(aL9x}?ANYox|bJ{O?1n9sA*?ZJSuTN+LZW$H5{UOW!#smI^!ZvL# zJega;bL3c2%vcUM+1PB*U45iywQy#ER3O))#R*nnAPJmO!Fa5H{#Qq219(goES*k6 z#%BifN92vhCIz1F-D*#9PQVVenxw!R2l4m;Fqm#pBlpZ zBPhmr=9$x-4CGJn-?#LbogUu^T<8ajZv0Mvw=#~6$JN&ZHG1m0S@*kb zliZBzwnX>1+@(l}0J4^r-*AUMkMlwvg`K5f^9bf%B1|gZl&!^^!^gYVjvt@fBadEm z=wo3$>I#5ecre+luwOi!k8teV_3mfCX1&I^0X?a|e6l!J4s= z>7^M}+U31**@Bm@%#jlP#|w7AXi-tVa5?+iKAA^}v8rzJ z)2Y^~ye3(_OB*Pz;u~Q(eF4Qrf^zX~CU#~n8xlbqpa+9%-tX^}m9|D&4W?CZs{cF>F#S2)^@A71%5i z1pa4%dABT%Wp%>~Dn8evmeHxNn(n=7mf*&e_KnAC=~WLT1~N?(~c3 z$==?Hy5usCc=d>NfxOh^a%QKBrav}6E&d*yQ(r}mAIJQ3vMKTyWbdG~F_5aV1$9+a z%~CQ5Nw1du#TWt^$9Bmim9j>6fQkYO--ce{%|3h{kr6lG9q`6|(VCbszB!?BVF`R| z5L0XJ`Di}005>ElsmoenT*TQn+lvcIsP^{Q7uN}b^t8pEa&eNVB z&boWGoV6{4Z+Ap_J_cwmxBkK^kL0e(5Bl&&As8hGPD%MXv26DfiIAkI+*;x=|K7cO zB~mem)kMsrn=9Y(1DZB<%AhBFxLuXsZbWSSyO#UAQWaM+K%FWDLvMS;*c2lZ}3NJDNQu%%Qu2*+>GkC^*;D^n4)Vd3; zkL&m>0{{m0RY<(;l#xMbj4fECmQ29kz{ZN2UL+y)F5x+r)|W+q&L|Bew|qImPPF#oEflz+4KCoVieH4gJf#F1HsIYd6vD^*Uq-eZhm!wc#N z4Jq)l|5>SjASnVvZxz`N4#%vy00IE}V>X(-bW4?k01t8cf;6)uP<`qQpTjM28L@a| ze8CD*YyI^&o-Y{4W@PAdhk8O|De!4+3ZjY@ts<|()il&v{VMr_XD;?LGu|hTd|TS= zT!jAfE9h9P=HlI(Ka1mI=oRYy1J~x)EM-Gw_JJ-#p`t5Q8DB|T!5TKR%4gA7~PXRH>q zo8OGj8izusa!0;!v87*7d}xG z_ba&WLMNVykP=~MJT(LaT%Pu6LW!YhFtK{Z218Czgqa4RwG0+ZFZ z-!WH2*Bd7l=PdpIkCY&{QWn=%_h^>Ss=p1kGX|4eJQS0>wz}Yp`dREg10IDgAgq3) zRB7@IqEDKu>XxF#RBuXDd;Ue}ST)Chk;l!|fpWe#b!4c)sDSh7=$>zMc@<~$T>c2I+`Z7iTUxPZKbjd|45vkjRc?MnE#9{v$Y;I zX|04*a#qsGeS*~7s~I6onyK2r6xnO78W|Yt=h5cI0$DhCYuG#(LjF(c)>-^U+M;{1 zR#COR?<#Gr%UD6?v6V-tHcZ_2D~38m_V0yCqp9AX*3}5EKNoIB635LZm57)xpUsSP zZuf@~ZmZ9q8yiu)3~e-z{=Ja%PxVI?BKi?qh5Uks{&BNZD3&g zqF%C}RjZr{FJN^DV5_(drYgkMMgwBH3L)v7ki4yYo(a+36^drMK3%TouOpH^j|bHi z_fp}YY5hlz^;a7gt8Em8e=0c@m=}n$CWeqAqH#aDz4%WddBi!1(;05ukG=4MI~9SM8k!7ysj0yd;iq-B)y32Ic_;UYu>yj%L|$8 z6D|cCT%|o_EpZd{9j<7DuGM?r z=AHYrc+szZEmIaLd5v@7q&VS>hsWwajnQ&xeOzr6X7rw|0|-g|H#SjaaFfxfyPtts zoqEYi=n%Lj}EXho5aYRTK}qt7tC!V2k> zpT}PJ{(8f#$-1Dkh|XZv+_nK8Rpv9EQ)O7d(iJRh^pRCXdc_o{Wv=VMOrXzK9-Fhi ztlC0)>DMNy_|9x`*FbVZNu4RfR>h4xlJhwKgDH8l?9GDyb#V>jv9zR9H6J~dbL)YL zKfZBP4>@f=_a(I0fRlCYqn@yq8dY4RSd821wo;m$*z0e|1h z!r}_TPdvlB4|z0)23d-fOMF*US=tAW=|53J(54@7lJSNVCG|>}k_Xu_3Mvv&TB6^5 zdkc`D+{$RCN0Ya(0WZSYIVI-4EALsHqRL=v{?|e&2hYlSa~(Qjr{;EYGs3{O)}Qa)~jM_l|9QyA4ReFw91J1jL4*5$RXl``DD8J7-)zt zKRG!ol81h*KojsRP0#pl)k=wYtO!bx^}H@5eBQcG3u!w-4Jfz}KF?XqMIEK*e46qA z_~G-A;v-4F9*GWIBMrw*YEP{46WNP6V~ZCU&t<%%r@fi7bf(7JWxn$Y5LC-mX4Ep?9FcxWGGD23vP-Eel@zC;V?lx3pp07t?9qkvps5?oLNLXNbK1y)n6okPb)+Pk)ZS?q_R% z5OfZ%LmH#fV zHTlI34Nd@N1i5%17Uy67vAHO{>Ks1b`G?4a>VD=BTn=4}7RdQcLa!^Kml4kkXBoFt zf)MTmofhFsrAD*^JU;rLWPzeg(2xP7L(DJ}u0R1=ZaH#X(y4N=%jO<^hEl+b#ZYdY zh{lPz(vh`yiiwCi2?>IlTvjerR<}<`#8=m~L-O-CM0qQmdwQlw=BAppP3%kCi5pEfLZlm}Hfs zcSv6FphY1Ow|VP$IS?jJXxZ{P3b#4q_wq$|&44}ogEx8bzUUi5Ir=!_OMZ0pje?#; zT`e2UmiFh#vhuH{*a( z%mU1Le3s6#vYWdOkJ_9Ii4|?{Za5co41DAGD?a5}QuSZHM*bma*klb5+}R@l98!}^ z8zBt&-$;S*#q@U_zBxSPBcAR3Dr!8O);)YRfrv=&Rheqys=vyb7~w2Yza&l+1hVvOWJCu?yUr z-aoc1`mu|+vGf}#6-wdem_kIWC(XtPndYQ2H(e^k)iLI&O!b+*CL+y5vl^K{nGtge$L`hymoP<)gpQL`(z z(z(kzk5XN=E1&=#ABq-KKjRA1#`uG0H9rHszfVr!Uth0@gAB|?>t7|*_EP#g7!c}w zK@8*uf9xXDl&45&TE%z|vHpPBvjhXX+>bI(=K0U|G!UsG7c&|+cYctuz7itsbtG%$ z{mxK6duw!EhrTLBhlq2A5oR)=qg5b7v)68^xe)7t@t@r5v@`lz>X04XnCINzof^-nn_oj$MpH6F0mzuK=1_PEx|}U zcU%JzXs%Qv19u9;R79awo-mbl8derO3w=CO1Kzbu475IfZ;D6!83#H-Qo@g%nbNpU zx**yj4p>)*prgl&@0+~05cg(>Y?|yTR9Nj^FqP%$i*&{3XcBLAf&N!aL20IE*m4Ja z^>svni$?ax^m{Fpy%3pMACnl>7jf)0xeD{zQ?Kk}0Hw`Jp7~EtvV>~^ zfny+*nw%+Lqnb1jpUqO}9wVt844VmoD|DL_SpVo^w)?_&fu|-{L~zrikGp|)`=L}E ztLvmovpo)#uj2TSuXv{i7=%;xG^OJ!*%La_^aw!hSr78ZD%c*Zc;j2M>z}XVz15;- zeMWTg`AcU<)-=PhH$Hg$lKp)3CL`xaPCicLj|OI+x!Mm+rv8yu(A#LjuR{FNM(`9J{Uxh07Q<$v@G8x46#rPb$s z*2X$RNiOlM*e(b!WxwE{pRq5t;?A8KOVlAnNQx>d+@_e=Qxynphl6S0QpExp8%81u zj`;7A!7-kV9R#Ii0^m4`*E_s~XwcVEo8_zzzhy9$w%JXudZlw|wJm0d0atcs!qht0 zHl`#D>hy_@VD|WFe7XnK>G3owG191xsNhN#Ka*GO3frwPFB5!aB#MhpEw%skPJz*I z9#XbwiydI{+K@3dt9Q#xu-c4A&o9O^up60W*X^(fXw9!;{x5BS%%TMaf; zp;1M=3qwyqn-^|%8DiND!vfg0W2xqjjD;Vj!=T(0%A_mnvxzC$CDQ!a55EIK-7|br z?N3|4+_0dMr^QJUzjw(EL8{&CibU8FDEL_FF%^IA?o&J$PJqc|_PeB~)Y~FtCJ%5Z z=$4e^;AdVRQtnqCI`PsGmhy3G4Va1q2$*SpeN_=Q@KlsqyIT7{`tFq6I0lIyN*sou zL;EH`KKFaGS516-z3i3U99V_H-EN$Yddk*-FMpmqU z?egqoQ_^veBWY9A`R)k$YO5q9yu6z-Emv1tvt79V;^11G_#^&y3^-uTBf4iA-^p;{ zc+pcyD7~%CUjWU#wf5r*A5HJGb{25p<#a5aSJ0kgCa-(Aec(i$IN{mWp4GQ@R`wqe zQ}sVlD=z9Ebw@Ge%e8+0PhG4zXOXb5vdLG5tqm@|3`J?TY&{~ zEn|PE{>9pg!oMsA(=)f&ef4YD_On=pJ4Ft_iy8dBM`*$JxO_(n=$zjFux^uSXL7Q9 z=rmv(O_$*XF5x5AP^bX%GsFf$>!dFExKZGP_1D}{OIau!;pGVbcW)Efw zrvtY{dV|s$heI8|5dn!YO2gp_3ODUcjxGP4+G`24`ow6T9^eR!Ok{s)Pkw*ew0Y?D zj=j+(=o!nF>+oOj$o&>*vs&Kt?Z=Fd0NG#$A6=o@MHMZ4qlTO*5>0&m(U=kLxBGu1*02G6xX0Mct&ZA2{D{ikN7~ovMZt$ufk{_iqk>VV9fZtaU2EWZw_Q z+*li1g;iEtf1UNgxC0kkdiAKLtHu33tYAY{1 zZi+pe+BG3C)!9k2C|)~4VZXoE)9Le0I4P_WX-it(8#Ma#a>GbTFg>G4yEqOzkE!t7 zt}KI0gN)?S*R=IKWV?0#Gef%Ltf^D%eqpxCtxwC^CeTr%C^!#=+)btgrY5pl&@AnP zg7pi=@o!Y=LQ2l1o#19QBPX}ZlR<6I41TXimyzo(9vz&kLs2)+9?z>Zd0?Y|^Q(&0 zxgw6^R@Xeby0wFa}iOB2h%YI{Q=dZVcSHH?=~pAg?}OU}KMT)r4-c(LgyG8%W>Qxb@C z)*0!xI7aLLL-vux!8VYJR{oHQ$TP|MX}nwr^b|zy^Uc`EKey6H?Kvxp5v3r-$#&1BrpQ4cx67H8ur4zJX$q26f+d814H|D>XgF38i4|5Cn2m&VhM|5Ex! zm*&$BfJ%L69BpvvHK~*}{&7DusGY7`RcS%#90-cpiXQ%e1K8jDq4vPm7qgIkBeC{4 zwYPh)W=>`o>P({k(X#Gu=y7&qMV!77BKIv?(i@)T7cw;52&3~g4bC4rHt?444mbjQ z^11DlY@wW87}PXY7}>~|`=k^%92q^qL=ECIqPu{~E#Wwgn#gs|V3#Y~beLrJmEnd@ zJ$o;tM10Nnjn;FHY z@3P!d)>P5*@DV0$HLjW-I>98mB(*WT`hbyPeJ$~ad%*f0@rOiUfm@nHlR`3k2A=uJ zL^UqmRL)0G3obUjb(&srLZ#p|AiJ%f8u;1j&4R%IfS8Tz3ex?moBs?D8BeMk9Md!;ecIku};%C*7}}RlEqCElIoE1)_=Jp z<}k?5n+^CG$NOD(Z%<7r&6%471|OZ-n2UiD5GI}M_1?qFy(%4Sq`(!VE@&I{%Y^=o zJmC8tNd_rqO?<=~K3`}`(n(qn^0EO(M5lQt*9@A85w_us<_VfTlhvqZtz_M1F(wjCf=m;d({c}ma!+hxO$7pbK>=cTL_~xtIO|Y; zYlOe_eYX<&Q=wT5)u$B$jN8 z&#Z6H4_WKMLt-L`Dcv|aM{ec9Y?4Dcdg`dW-Vpy-8H~iPQ(&De@_^x;`z}Bq3eH@> z^;ld&mHN}Qfu^L-{9x$b-zS=5z6U|7U7&BCR{|>!wcQ$^lEds7Qkn1l27M!S_^t#z zkCebiotQ8okb?Z@B8J6tHB5lhtB>aiG;ECY=jwT-#vw_4xQyH!vE-uCo$EZYGJd+O8 zs>drm*O>jl)Eli_$VN{ZoBfLaWrk=5a>f?uVBKmt>Syv`8hZg-kH|wkonzTzKBK~w z(|WBJvI;frYxnc?4Bm*TQ?biF`C_QChrFXha9qsSkQo8WA7l7pK9eN%{`eR5N$Rz3 z<^vR}nX>_f&u%HR?iLE-x_iW^sYeF*^;`-S8spWT=LMjJ-7X;bEtfYQ&);PqKKNGb z81|WOVfPbfm7B{)@4tW0BW89>kQERj>t(8;(88Ywz8%xVM0kv~0qi)CZ|q4-Blw!hA`(nD*aG^jXmU!MNK1{TFx3~Fc4t)AX}vR- z*`Ss8(LHUZ-j+cIThJQhxvxhud#DkiHy!rkQ#85+WScpGS{Q0HPcPK~dAz!P#Z)>G zLll^)8%o3{r~Os|=bQ+{=J;?RMa;pal4S=n`)oN9=%pxSsBoDVd7iu4zIu1e~EtD(fdzWsYxV1Y(#sK)W=K=VI4<709Z54XvMj zF+Q=i#@~yvZ7E3RdK*Hxk~xXm?piu}_!f}1S{mcsT`JV~*!R{bLy(;3U5Z|aG}1vG zB*Mise(gl)TK`#78hs?oy$MOokiF*@&>AqGaVN{6EmDS44z&3>{p=M7Y4Sx;@Obir zw`0Q6XA{J|Dd|9zAAiwoQ>}!3d^OM_BN`XG4IO*Me$=V0z~G{udKZ&dp8}Fr^eOY$ zWz#NZ>BrY3j29dzHWlzer0U|oa`hH3!g+5#uHQ2~g}}WSXKgO6E&C`0A9)M4trk>_ zd;uPHD_PsKCUJA*&DeM)nn-S7hJ*ZS|0w^*(y=42r<~h1fr{HMRW#Pis>b{(ybdy=+fMbniojirElQ^O79qpco7~|WnpPi{b`pf~eS;@*G%=(9D0rZFIQ}`K zJaT+iK`KUPS$*UzoN}ZnCT%>Rx*()HwLYFCc~xfDDT4naTA$kjD7VGAwWCb#^# z%S3lNJI&Q?qMpN_q8MMOwXLVe&XN@M3nQkh%Y>u;8k|fdaP7Swo?#SI$8nK7$0%UU z5K&F9*l_ZU3%Ue&>F~VzL9ArGPnE!CCJRhr{dX&14@F&;ZRWJ}2fHUH0l_8TuV!bg zZawhvcz$Q7C{q*~NR=%u5r^$4gY-wizXF+6{QP<4LC3{|;kxi4DHmzq_6SrVwgr6}_;Q?Gl$*@k$Wk=Sx7 z_Ou$@L0nvg2D`C6tYYg9;8N?d&UpQlNe2;&HO*_Gf;`^&RP_#jBcq&F!6{#F6+etZ zZu>%5{b>#(^?8EZN&31RPb8NW{On4Jc=9l#or5X6c2+SY#@a|cSZh{N;&9QtYCkoo zYA-5nR!-*!Ij}S^rI{m!Bp|bc6EY7rBpY_INT2jNN$1J37qLARO&6$0)qDoer%O5` zWPM^0$=CAR>BC`vYHAc{kOb)j1LSdsC<6DMD~NeUNKy~gr&xgA3eR!t&3s(xTc z?p^n|xFo(oZ>6gT`Bk~dyy@7iB9+=H5wNmG z$kh9X61C{VaWfbGEu~uIL4V0*z;4+9c7$Q!0d|Cm0d|CmVG9S~?+)K6a{MjzN?;KH z4yP)xHAZWW=U?*V$vH~@FHwI^vq#at6l-g5I<9XRVI!ho58lGIsoQXpP|68sEknVq zJj!+eb2%rx;GRF$WN^Vvnm_9Lqat@4NP{89S(lsr=u)O$a%#8KmN^**Fs6^5}9V~ zPbSwA%OCe&Q_i-}!Jnpl316fJoZN?-bFk$(WhJ=$dpD5tvp-z6^iwjaYfzrC@)4|5 z;_bG{kXs^7x~VL9Fvuulp8T*zKM%hjS1+LA?zfhv1mYC(Zga{d+>Y_1w(H{nYtXTg z7{V{gf-NXTQHeyq$X;5)w1mz|{42`HnZFh!-Dg(9fJ}#@BL6*k{bka>{$*Sa@{XKf zJnv0Anv)+Q2u2NFZ#4J*Ct=-Z`ph7AW1CFP+0M1;NcxEnb$z1r_wM83bQk|!%FKnb zu?i}Y_qzMQ%xxUBcx5W17`GsXmuNVJF>tBGRq^_|Cb6!f5NVgY{u+3TrY4N}SR}BT z()iQ_v&oO{{ZE?ppL&*kE5OP5Pd!Jr|DIZP=D#{XJLwYQkcI{j#f|c*?V(P;LPSM( zzAr!*0LsY9y^8~Uhjo=!qZRS=$21B&4|KA^!@L(WJP=O)KM6-UKqb5-~kJ$kF4|1a+R28k^7W~)B_GFhjP&R z-D4u$xRjQ8h_R9#IOWOG|KRQ|gW?LlebK?)g1bX-hu{)4xVr>*Cj=kd-JRg>9-QDB z+}+)EfIIo0dp@35_g1|x?^X5g?j_T+dr$AywSIHmR=9>;c{h%OhkRAgGY*W_TQ#VI z=L7?{^o$V?hw1ih+bN-l@DV{~g}@7ZBJ{Xm9r+<$4FPaNs?Vu4%mAQ-V#LA5sjIy7 zAU=wklUhovoCgIiA+Ap@)qE~D+`33O&r(Uafd>x&RCT!A?y9x0Uv*%pzUp|WO@uT; zk3+#*N%0mAIAKOKBIRi*a}^Tb$Kl+bU|AvHArBXH{gx{~%YIQS|HQAyR?$q(|i~o5UflWwUanMIw;ZkoJ%Odr_-U&oIM6?w7+_`030Q zVi75QhSfJI^yXc@kJiTRkPtRt4{>%bjDob($>NOQHH4m7(b1U$k>FGcC&yRE8dmhi zrAk|`pm=iVo?L|w>|IN1BS`Dy<+Qd=g%IYiQ2QP=d1gqw%XZMx8`6obmAeMj(B$#2#Y4*DZ z|KzA8-WZyE@(W+swjMuAWV=PdQX2OTL{s7t;mc}@m=2GuVi#6Xt13^cWQG1lPZj5+ z_N|U|DfXn&h4*q20&JERu-3E4t7Ov3563OoHR(?T7beR*2{E9# zkiQ95%KQ1xy)pS>62ff`>vZQ;OrqP*p1Ov7G;Nz9V%ab9*HO46t<_@N!WFPb&}0+_eK72f~lJ zbtmE*sQuuCXw-uiPX|WA{4nh#8bi#4;3I}2dS;tbhvpUy~da%m_YbD(7Q(G32|laQp- z3kOTTJvLG3+?$-$0)z0Wt=SalCWJ#)Fjv>aqu*ECp+gm%0vraa2*(}RwBcI`fmhw= z>lP&D!y~Nyki(YJA^5NlhT4N@rPb=A0`PhJ%p!BWKd^A7!zyM>aYTNf0-clc8Ng1~ zLY8!K@B7b3j=pV`)30czm^}^%gebn4%j1r#%pu{FNonjcjmDra=IAaXb+LF_f5Mj` z&jIyoC2o(6aDhJx)0~hYITMX9{LB5%J=xw9u;Hp1ddG>0%(@mV2iX|&>_sF}hd&jY z7(un&7A`P}1amBx4u;xCzAh@jr`aPe8OLmsT%90f(&;70uU@x z5=B#sWw>>6!khFU=fs0{$9lGghDPF<0k5+EjpR#j_Ob zF$d)LoArrwW0ZCfT?(-e(@kKVT6iCnQTfIkM~gJ&?dN9spYCWAUR};il+=!pIaP;E3)^Qp=u%+lwZWYW-bHuV&q=_I3UQG<=m)d@?q?q5)qY+_;NMCi~ z{ChRLrT}D2Z4-n$4YRO+1h~BZ^Sx_Z@6KvlXVRoV0ne|vx0}WD@$E6G-?y9fDQIGp zKAAWbCYMH;z=rRBd59m5HTe>by>A}ySW`R8p;QF44ACzfmkD+t%Q)yxzs0O;>9T&$ zauy~w2#mV#AXz}AcOahbfq3s7q!_lR?s{D?eC zZWZ)v_enxZuv)uVIh~qqVUgH2WWB?NmpvNhpL`^~+HyiVDulRh)d;Gn3!HhxBk~a8 z0qdA$O^Z2KfbbA|CJ}@)DGF+x$<)|-%0I|N zeB;e^XUF+bEj2|Qz{jn#;Dww~^lJGB*h1t6mB?fD)lA(eIY`}Bo^<$3wRbLN?7-D4 z7*?E;Y?py(JS(q5q!S=b{o&HcRrF%(eKbzo2)*44XFBGM-T^K^JFh9!ie{M@3}SSeaCjRq}{V- zacJPGI0io031b)xBcSD6h%I`MCMuq5LW+?x9Nu0VH*jjK+_V;2=sWrY`S?4bDK`XF zI{&07Vxb@@sfZbKZYgyctaF{Cx1$w)`HyguxWZI0XtwP|8`yB_fw!f73Ua2H>?q~A zzTC)VN>rXWxz%Tavw<|M8-Dg6$7RkLg8nh(+OH_v&B*E-x~!0jJ}fS&DN zkdhafnPeWL^NEaZf~X03zL?WxE&(88W!?$R^IT9{h}6?Q^{;;^NO|A?kJY8~p>W*1 zXbW||NV_~%@~qwO&t)-6`3rnA5fo=>qG}dHLf@8Axr?;tZjDqkax>n?xY5TLBtfWb zuhSX@t7Kca)KHC1;3+)kYYNy|5tRQOn1Q#&q>ZzuwJLNSSr4&d3KUj~`pa4?RnVX^ z3u6@cZ*UD>co1rO*tgC7y&oZQDWv2Lu$M*5ikaqtsX(@Y0qmVSi}dWn6z2#aW|sXO zfUNv%mkfY+toVe^<{#?M?R0YP`RqK31PrJ4sk%B<8}wbA6fbLO<8^EfOhI#m zx`R;;`p*AJtVsv@jRMk9vk=h&5zKQO=>?E!(h&ZXIjVcJazwTaF|d*8_Nia@j!P&6 zSL_6)7gny>^^O~CfEU(hGr#}Y|EPEP@p_T1I}cbK3n_JE*~|W6IpJ0oD6?N3cszlp z-q4ZKxxNH@CdSs9kY1C+aSUpEWC!B!f_@kY>u*3V^-fW{$gdHyb~zHkIBA%9Zxend zoId|(3u3`De1biIQ1fzO#zY<*UlI`lT02Y@h4nu5A&_Md8vdlyyTFTL>A0fWN0B}) zMrkNfh8%aY7Wp8n`%JV z1)}*C!4L1DGiJWYv=1}kxH%m=G<&e2f?M)oCt|Vu2-tdCZA>5slEhYXXjHW)&?-j^ ztMKF3oHtZbu@GD+VrTwgHIGx%VQY~wEi&!r3O-$HksM;MkA*d*&{ zjq;U4@-VmYkRez#lMM`vRim+;aKi(R5Ra|fmQa#?{ROY)$F`R%Z~*-EONLhikdZT; z7lCa~g-lfele2J! zhZ;1Mb9wd?_cd}x+_FB1*UB2|9+0p^c#^}{S!IVb*8}V*=-t7TkaIPHuJ|1D^)rv0 z<#)grf3OQ;_HcSSAnSNJZ5e==0W%1tfXtzqM7lF9r4+ z#t1&RN(vlUF|ES^^-RuwVEW^)q@z>Y$gVuq6-9eL98L!{AnLrAUM#}w0cJLGX( znT4PXm$Of@=ysPj;EaSBdIvilhO}o#W#cN?G8D6v-C!i$>?>FnSSG8cwWG|wOQKG~ z^^`Jul5Hz1J0N8D-uUq5x^(M(!oU8l$>;<2vFo_GGeS6|8)pAIn^kmVPU%r=-q8FPY*P++$u(+AEr z9Q*@J_FMo1CVMVC?bpj32**W#>87@Qc$PQ)`qzO!GbKmKHp+9R{`n-`AH`rw$dI2oB%{_eCP@W@aE&gR=1*UW^%n|fE8n%fFX&g!# z%oEy^Yrv#J(Bf=yG21dhOLbL^lj_;2ut&U65qN)CkQd#6Oqpnd zcpi|6?xFk1XGfkh7Y6e=R#RZxAI(vP@&bI&xLYXct-)2hW^``P!--4x0vmF^)62*g z0FLDZ|HVT_;;RFJXp>>hk#M9<@piaqLRpln%p~4f=hSjN#;}lTv+@1N1uM)XjHd8$ zrs_Dd1=i+T05&Lyo5P$g6A#HE|=e`XISYv^-?++U%n z5nk@vZoROdH7Gsd9beY$X6U!pnkdsy39pv|GizpGj*9z3{+Z}N^<6V}5QQFN;{bMl zmmA10^0B7rYFk$&3;mllMaX+wpyc6ZK23VfC;lf-3(gaW#ByI}a{(X&er?SFJZr-* zDNtgJ9Ar zZmY}s1~DXFvsQa;(pa1nlFIrN=x)on)Rzz~ixFSJP!7|)?uba8-fUTRF4PtE4ZQ#M zFO3LNw2y~W=9_`~j zL$+Cd8!ZAePZecUE&2>g>i|?n{ET$NB-HoFv8fIp^xW=Vrq@s{Xt?d-on6!6C$u5< znp5n^NiX@|E$6*Z`tsiG(Mj*)0(;67iA^8Z1^wKPc#eF}t7Q=8{D8HkwDW2Op%Q{+ z-4sTesfETicVHHm0rL1sf?9Ai3C?|COq9R2e!?h6hsj12vrN?rxuz5%~Zs}Lt1L0pnLKH&}mGFDsGSul*ekw)SbMDxYsce zzD;ZDBeE|3{2XUI&(&xyXq_BfpOiLVWFl*P?T$lgAYQ{W&16(SYU)0GFi@7sEWV(@ zmAipoUl9+Kzm%>!u_W)L94JSY^R#$WM>-~^(=aod;a92T(~meuqYPa^7v)6~`gG1~GG z`1NW@8swymBGyLh;Q-dsW2BveL3a48j775F4k<75&4d77?#~hjv6@Ogo+UsziTM(D zyha$ge|h(R`87z+PStX`GH^aZFK$3&mS3WJj^IC3UlWj9v-&*awnOo9Si%s=Qb)WR zHnXS1T_OC)M!InA)8EB7&o=7(8ggw)o^%O7sQ4Y-(UdztTAWk|rs?{-KPHfu5na(n zmxj{Y1G+!Z3+mo|zxiP4oGkQP%`bH_+%JrDY(~TZ!k~jk1Xu?KJYQ150JBvac#b{5 z1@+t&Gq%l1v1knn4IY211}<`S(X{aYgeW5^Wvp4!q~Dw+1_G9WNIU zOba}Mg=<0rHSIGu?69Adl`On?T5Wzsw{Spyx%S3}xUIM*!+~~eF=jZr z%Hcan2%tr`>Lo3ol-cyxw~V+x0J^SSeA!KinNV`PN8({Y6?isTqLtqVd+tA{*x9Q+l)@Nf{D1?xtS?_3d!Fv}W@bkBkzlOxSm@wP|6 zZ4WJWiau**(slEOnz)m@5q&=GT3eVx(Ub(1qM8CYs*{zt`!kl$fg$KMB{2sS?L62N zO;{?+O-#kaa{v&1VS(V=y@LB>NyS2f1)-BsoWB%P<0iIHDvQyF`3ugLhRE`Rp76-@}_Ml z^{KC^rDpKirOi~Xzjbn1m8@&}rptqo`trEh!eZ<44Ys1z@5MT+b-l_(p_f^t3r+~1 zK9;xK-dTHEA`VN%c_;SvlQ|$A$y60`$T0U!<35*6HhqW2ry3oZ{gI!A{Au45jZ9eq zGTk|WBc6`d3qRa>Mgk?>nO!;wv-X`rRRMOn;7X%Vju*jnG(1PMJPVqAKj=8McyxqJ zdGcAa`d;Y zKjv2;$^$XS-Q!9OV_rE$@1u3~mel+0ii*`|TUDcRVLY2z%SntQ+(A@S`y_7q7EYt37pEY*+Lcas{SSPbk;@#*JClom5rWHAuj?1 zOGY8RA3$8M*BLCzKoRBziA)bBcg`8(%$(5faS6`181qEU@6~u8q*{$oR zcY|^7wx4wnO*(lQv?R4{gY0;Y$V9hZO2ZLCj^) zyRg{O$J3#q&-2Io)9)HT(CgGYXn^#6cdGk&J=M_rZ9dfxv^!KIblT=)+Yowrr}uHr zU$p;_{p@hQ>+X46_NMzv49b03)+GJ7{5bTTWAS?}i4}gj8LRRA2xZxt@OwYAFnrtI z+!p?5-R}PACl!8wGwgaIMm=vJ^?oM(fT($rc|RL6^e%euo$3bdI&{DEFMgahBmcL@pb>l!!4=zM~U!@u<*3N`z5I_+7(=SJKEHo&#S}xL$2?G;zv;6%gB^pt0d-e z{O0R(tnYP&-}^wU5NL0x8#MpU@YGlHaWg-J=J#@b+4XWWMf&~}D(r`X_Ov1Vwlmi4 zef?_KQ|b5W&<6+l@OvHT{hAt9+m8K~DqE>vT)0mo-Q@%7$m?Tu7*F9Jei+*iTp2k(+@8 zpcAi63AL&);kO}hGXw3M=6*apmKtupZljqz^;&?9affPCPtg`XUNu3i@5sJ*3m?AO zU4)B%pv9cHIm{jRRli+?XSm#=%Y_%ikMF&tAs>Ti4DYOOJibdmC46xnpnQqDGIKvH zPiuVNvK8Ov-JdQM{O%126^7arr`8@n2H~PfdqVd$$!uAJjE|Zw;64TMd5i6E)o*1*8&Bw>2ie z=#X>$XlXM3T=mE08ou3K`igweXMN1qn2_YYyluYCqP;)!fZvOXSii@y+>a-okGoyN zcUwW`7RC3Y#m$eW>r2P5?&pD6-{%6uzlx)V9FyM91R~XjaYD~9HhA5jkyzim+fC5U zN7F{U5bu-U(=pnyp^tNiy@Bt;80jl%vd5b=7qGuOL8|80$5{!d=ga<+O-@bmD2Rch zljM1C_&!a@7c_z9d)%~@*xgI_vXAyo`*x6Mn8yj{ch_n7c2Z*CBYeHSf8*Bp$EdrO zy}0Sl4|D*24}EmL@ebAb8FDD~9X{47daw3UYQRVZ$r2r7b}!Vv-*bFNAKN^eug8zRHw}JExumPtB{p$%U9L6(PtFRhNQF9HHoMDiKSxa*UzKB> zDCw}G=Z3q>UhYf#JGet2dg25<<7YW5(wL5;4&KZzKauTN8RSZN85m})>XDwW`b~+j zfGSOe>WknUp;FZCg_Y%GY6fcdADQ*(yLrp^5DE2UMI30Il|m(}Gk>|46b)GLTW9uH8cq zXZ7}+^<&}IW5&T|G6`qjDsz_vbKS2#MnWfKb2y?t^ZXre!24)j%pkbKqtje_cOLxk zyp=Gqb{c1gT4+yx4uhq!O504D>`w0_$vs$XjN&zW&3HMItoZ9KhtuSiODElEm^j)H zAj$T%dXY=1-1~t0Xv*Q|W|{)$Exxn+3FkAzdU?D>=YphpQQeq~jCn<|R_U$HyNxMd zYm0w2S``b#J(0!ard)^wTEuMmpgGU{HNkf94UJJ|>F2Sl)cf2HJk!AvAB;=vA{fd@ zWiOekohaHDMZuuUkNwk{ZqN>R+}b8(9d2x$7WTP>>weOvkR2!Bj(B4wt4A5fKY~uk z(%vz=o&JVqmdIY|Klv>;lZ{AXxgvo6E1+jX3zW0q+z>O`9^gZoJ_N3!<#fPu%^wzLgoL9i6>%QfOFJ_|O?FL8U)V{|U z@QrrD$w2wzW^BsuIn(g{sH7Y8*8qCzy`4ANk+Harty|JDW6%#Y;PCEIZO-qqysC}IR`C5Ak-+Ohxt`7;d?s4%ok$iVkO=S_U$pG&~$qbm;5`WB&ZC{xFtFlDhg5!};oT_C&e~ zo?v{oRp+=2E5pQcBCwe#=Y>W1b)+EBtS>M%`Etu@ zZZfI_9`pGWi;%QkGtzdU-`-|4vGVd#Q*z6z`y0RBowW0p?jSV>W?BY-LzKGsh$r#o z<zu+d?n$ZKX0PIl$^W zc~(dVPWTd^(Ustjtl$jfw;Hj%F00~Pu72e2w^{}e0zBlIbkbEt6X?J}nj!S}{nw8U zZG`~|Ryfp8m3kL}C{W(Er)UYPxfv*V`kQR+7H|#UAqy+eN~&V96F%f&_GJp;QuG zandmo5=k&Dj6j`qc4d=JWSl0=LjZ6ip20!(uzbH}Rr(q@00n48G}48!>?!6DLgePv zLLC8|Dnnx-VZjnW)y78UU`Vq@w)#?lS5Yo=i~Q3ivm(T-Zb+ryk1PIdHU|(M!I5px z(DUSxY(Nmf(Y&&*X;{~s-}`g9*3#Rd@Z2qH9{|R)ZajHoSbo47ebb@Jd;F9SiReh; zt7Zn!5)-9tH^_;fU@+o@eImvvK#D)055XyhQ1Jn#K`((p-a$cnw}iu6k%NrA!-;i`Z=V4N*yC*X#QNN$$3mL7AX8j;O@+FqazdDAmD+Y$;7EAdXnRAJtAz$&U0H4F*#zaK;A&B?1xmnq}DZj7r5i>&B?pxgj#`_}#DNbFw z??KWCN|7-8@t%d1;phbB2}l5*&brR9?P0ETVLhQ|6=3m`oJ}ES8iY~|@bk!0ZCRhM zly~1sgOrWf*a3f9&3U$eu;mkDDnEw_~;0hwqx zp$dCN>Stqa!nTShSvPL30N)&;S`#I}J_uRkw=kCbC~+_2gpNPkN=pfut-QSbc&lOu zfd-_t`P|bD(&!7gXZK#8wt1{kcFKzk#g|4RV1eB;EHv=)j8JF#>5|C>D%SPXccnq5 zgIc+wE?hK9ST-pyP{_~D&5lON<_vJNaP7MFY&AyaDb0a@tG{M0h8k9xO{0mx4Rwr_ zE;ZBM4b7$A+5=YI0g0du;ZH??PIn@-E0TTEf!`T^yqAH#t&oh6%bc|+J&>rGtR3E# z1yid(AYb4>wHZFfllmXMD`fN@6E{2 zL{U+3bChug0A-68k=vVzvRRwf%;3jGIC?Qfpg@E^z%fpWE*|0s!P)z-wJ2yCED~$~ zJHWv67g=|t%7Yy68)r0}x(O<+IHU&NUjV`yqT2yR2uz66y*dem2)DytYR9g4O@My< zZ(ctRaRHn5f-@+af1X zv)S5#HVR-!Lz+G+#xF10R7SR}3 zR~ym4da6O1Y?yvxa}Iq#1WYT*UtBeeLSCsxLga&?KktSM_&f@wNajZFg}NUr0h z+-~4w1{uMWUkQ5MsDSE*KMA0n{!z4^6nzj9;N8db}fX1h_l@CbGN2w$D`j9rSF=Tt{>v z;AZvGkhPnjgA`F}lx+q!Lrko`n)nC+Q61=b^13#aAz@)&ywrLo4s=3XpmRA2!J2mm;eeK9wIrUrwmzHN8P`_d+|D15Dws9lUJO2 z#^VIo?X#_8J%12IiO885kOCh1p}nGpQywWq;;4=UEgU4ndRmJKmNuf%(^a33U@UBZ zi1C$bv)-y$LgN!pnU>VsL37q>Q?XKn0QUpFyP5FATSbMnX^Z8Ae^QGIrnp8E4fvZ@ zXAUQ%wkkSPL?u0Q(gOJ{taaUC8AWtQHWdQjJeHa&JI-Q2FK&1CWTS4AveawLH#%dY z?^Jdg5vs)5|c3VwA%s$#(k6xVTPc#RznmTM`?l_dP(*o>$Gq0_KtzgbbInfQm z8Ck^9oA|~}-I)UZOF=90A$f%O+v*@b&yAEToNfi8Kef# z*>EIbh@(^cD2n>mR-j=fXbND&WwFhCk5k6OXKz;Ng;GH3%`=F`v5LYHLj2Q%2y!C- zz9q~q9UU+X-;-HPj4p^m6eYT#LsmEj&nIWB+W<8MiOWM+NGnN&1z~VCSzCI9nnY(< zKB|I~pfH?Rb3J}<=znJwf4xYS*7|95+lw!5kMXe18Wo3v4S~zSNc-x`3F{(~a>nPI zV=HP2V$*NZLPrp3FIgQSRFX*{VO?B$I(0;@uH>SpTw!T({(5EvrptlR!wzD8=2&s) zE`nslzBUVbNWbg~=c_rPF;^fb2+!gZeJlmm%TAYIi>3pKupncB>Q7|qvV`LdwwU{2 zTVA8bRw$b;L=YgsYXf2HEYNK#eUNzx!c30(&H+jqe5oP-_`O))mtoq28Fpk3A#Xv^LgP4<;9J85W7ls4>rL!5kJ7-=K^Dzkdd{_X49 zWMSjzx%oHDb=0sjbDyjq@|7x4fe%Jk{J(>;C_^kCNusFAaPKquUJtOOO~f(%2Vy$3 z0W)~dC?pi;EL`IdXFY57;n`a+nlf7I0S%G?M zR3sa`IJ&HB{x;>`Sj%m28nceu*tOg#epI77p8LX#{m|81yO7kWZcgKEZ)FpLFWi$F##9EpA+Cn{df{ZXs!u4z0ZtD}d@ zINUqJV*!AY@W$rZ7i`M3*mN^LmD6=iM8;9(8B>1{RFAnu^d5o-XIAu|ekVslK zKfjR|2JZ4QsRWXNNYcJ+{oo8h{lN(TX*H%@vl2v@g^;9zTDzXO4gsTT7$Nl#&B)k6 zNxSeTI*KrXf->tco;B5~q1S(;P*svOg$(zT8)P3E_@FbawrWNCH^ogO zIVB#R!LLgzK1y@Sw;(xz_X@Z|xFjAKh%@t)ndmN+zijt(xVG47aQsWXI%&Eeq z&ew-Uy&&){{*(F-+%-Jd@8xx-i8?PBh$*aO_RCqEQ|}da67pJJN}{eruH#Ow{EiQN z=#ylhTFGQXxGU}SxIRjJfb6ZYIG<>}CT_wlb>p{jfKB|lU?6uUXv6a0%V)##?L5B| z@wlS2%F^_di(IA??ydL{wRK36AJbdp)V+|jD-@jzj+L^3sDmhjc!iKnaD_5HJ|5L& z-3F-dr$vRRQn_a-HPoKV#`p=QOaramG4*@g`7sj}LDfnY#k~em0yGBcS1Siang?-d zA@X{hnBik9>xnju(x!9Csx$vr6|=8vXPNMb6X&2>|ZSd^;b{5NU8l2_(^_0^v-eJS<*9N?=YCoI=z3a6&QZrX7?j5oQ+hsMH6Y% z9vDmQJ#lV(`$G3It(Rhxx*3*#smvrE@LG?euRbfxdumF|+SyZBi5TKXQC{1$O1{B8 zLtGFFnf-YuJ6W*@zAF>WE5c_6Q10)kB*NAiweU-C5yx70jmSr_+bI53Xmndmb!e-= z`WPcrK1mLe!l3W=sJNYb%Y;??30QPTjL1g26lF!*Lb5Kir)F%+b)F=J}gomY4C@ufFh9psy zV+rh)(Zm##(Z+oQr39@zB>r>NzMK%y1Yf!(KWY37O1L%`(BQY~eXYBya^1>3^n}y=-3^4bJRA*#Ve2Zyg~2C5*^6y!-FX4uD zLwqtGhKpw5j@7DSjCEzyvASz4wFq6X;*AnnhT^fVXTD~27}aQN(|DK|ky;j~RW*~! zCi%Q7t3!Q>L3rt^c8O%e6c*e$xKP8NxO_N1I^$KKuN{=7u|OCv_|#l~cVVlkLEn_I89y@7s-ue0C&ffFMTo0TK)ng`CE_?+Hq2iG;e1~3hmC>&;pRFNbtm! zcjN#r+fk(lP3-Nv#ru5Gk(mxUjn?}Q&4a?Da_>&T`Q8~Uz^N}ZP@9!1V z_hrec)1=QrCHow>N|{yi`lxE#D@biuu@>pp^nQ^X`HUt7<}zyKo>NqQ zOWGl5qRaMsF%TV5(gD5rO zvQ<%eiNAjItCbtg1=yy*zE9PkDOX#3(^{+P<&{UPr~rMsp*5b&%cuJ1mt@FORCm*n zErq7$XVilk>KrJ?c&8SjaR~YW6Q-}d&X|!{qV*Ch2)%Byhb~f7xf_9S4-Gkz(Ia)8 z!YhRPK?Rc#de)chRT{i)HV{vvl0b2|U~!{&Q#vDRnsCM*Z&OAp1L!f^wK3-nIni$--PIZauyb zh4J$=9bJcm)Ui~z>p>E@@8O|v=?m0*FbYuvd0UY^r+!dfBy%Z z7HkF)oP1Fg>>#F3KP2T`Y$%kht2Yg#eHS1pZV1t@y*Wu9n~mZrq#LFA$&DUX3a;V6 zb(^I{-}59O)H>pBar1|vY^&0O!+-Qe94#i8?!knef7zkO&#oxJNROo<(1n55ipbi0 zu%m>_)S3?E*KuYIy|x|UajqSOncuPmXF&3i7P6=jx|1ncaXEPLe3T*wlNq(IL>t`D zdu0L~I_+Y$r^_ZIiJWze-;Mk>hc+)H=*uB(Vd@+RW6!JhylA-duyNudB}aE1Y<%-h z%@|9j@7YsAk38|m^j$ln_W9cl2A!$&Sxh{Vs~_t1Z7Ljvg#7*J+;3! zo%;GMUQ(5sRk;rcrXH7Xtk$QCrz``=buLwxVy;z}C&tn63EAa-{Vv%w%m==4Q(|h^ zj!m7CM~lQG&AES1+N8WRno*+R>Cp0DRDtK~Z*)dKdJMxsi6$8L`m{oP#Kg$KkehlZOq(VBTSog!=r37LX+$d`X`_YuLLC_;pRmEiA7 zmcl^A;Lk3=Af4O=$32j}s1<@q18JWZ)vS0=Pw+vmYR4dVPRyrQ+2=iowfuGEzA3^7 z=rh7P`IxKfz)l|X)qQx&FI_2aQe2=3?-%zjfDT55OZt4Qt0_fd4Ei6=Mc3UV&Q{(QAH{*@`NcT$+`A zy`Z^sNqR*lu8=Fp6Mf#4|B7jSxu9A8HK~hw^)NQhRZP4lcKF)r_*nFgz`s&b*jl^y zUDj;=_p)+I-$ZFWvjXBM1@8zQ!$DycW9}@v8B?|f9a5&PESFhw;<=W4)Agf|XanH) zH%=F_y*Zw~>Q56&IL>E;{;>o@T^LBb579t4!xu?(=MzGITDHS3415-PFmsp=%rqjo zX>)*vwVCpvbZ(SWUphznE_s$q!?+SFlGZ}lWPA#4L1GOqCxqJv^7qk>E>!{uw50n! zU()Gg2af%3oU<-IPYoYu-V|rW(4&nXH=Q_dEhU~riA0@(Z{(V1-oMwWYYTs`%pu4m zyPW?IvC|p1TnA%$7J7$@k(4Q5+VC4TJW}|nm~e0q0S{!P09vG}C>22+$nyoIeY8Lq z+(S}YYDvm^qIl9y$hw1o3sZkq<+UnUQv@yN55rqj;VJ%x38=EwMGK7@^pb?L33nqL zWwSwo$iUO|Ehc)3#M%g7j^7cq?@>KF)g~Ow9VF@!PPM62BaITt)Zd1MT=c`li)dgK zc`oID;#tL!kWh_16Ae^^75U%59!Liv2RjxzHAn1FKtJV)mmydM40}--r?9P^m{@HG zNt<4T5#=@;2kvrOhts~WB;yt45{K));3sR9qz3$vs@ijv!!Ba_-4N5CK+;-jZ?PWV zz>R%LU6oKG6NRT4&gwv{*?fA4seIyPnrVEB^;H|1Q@4=4&liV+OPO&ZI@1YYTBCc>|a(rQ{HnSf#K&nXoG z3>9?UBrJ`=*fNTl(krI6C^dx)mp-DoKRr#e6Am6HO%*gIgj(Y7HVEr9$4tJT`?iDg zffx|)Ih(IP1_3{4)4|0sp?cLw3oX?`SUN`&D2*2*a)I_@x9HqBR_SV|! zQ>MJ0>Y<&o9D&eJO^&iYou(cMV4aQ~tzpMXcSU+-jK(`rDtU0(&(Y%!`IL!OrWWuo zw|b~%+pg(V2$0i~ChP8*mfyr@k(3hAlCOh+$-&AB7RAe!>;HZ(L>I&08 zj#cp{vm7iObB&$n;KRXd{Utsf=Yvf@(a{cC()(KZJC`sVOzMPP(PXrgnZyBIwX~>a zf0@Mnw2|fE%{UHHBM$VYoTvDTUUnQ%Q^D2A^*4&?6pxB*N%H`G1!Iof##) zP?6Ds<*H^)nT%1UtgAw%8~pf3`p#yo1nENtc@0X#2AAa+AHJx@2`?!03)! zf@*rV!U~`6l6BZ5YqL&KLqbE0XolQDrAb`waAen^3KC=oEzmz%f!k;LTp(Axwj_Qs zR;q@bxv;=O9r`$3z= z`*;t3ghV-+KtZb@S_0kA_AN7Wx)fN2cy7np_P1bQa;EXX zblJLc0N_mQ$6>H(LhRRXTA1DvI|wpg?%!A;<$j#}v0pF!&Jj>H70MFa1o$nQ$J04Et#*7J5?{fr=Rsqw(1;h zG%(YtVXx9mZ?2GARWClLpZ$?+^?S5Y-)yCt-A*(8p+fFez4(oO);HOzd$iHeY^8?% z{J+_|^s`RM$E~BTdS-mp?8KVsF%@z{>czM8vmVLE9iy%WW_&g5*_!E-6>^9F#ZIIH z?Mr~yl*3po-vq`uLo?<4PYq2Y$_g#g4;&Ne$Z*pSe*P!P$Mr}#mPBQrxTcvUa`>01 zUdgbq2TyemyOLX^7gxy5suv&A&$=dCwU2V@n`Kn9%WI||RLI?`7i-2O)ezAc@~U(> z7kckYKaa-WBvbA)NR9q~MKGF7nam(XuNk9OO;o1GtJ3CN=)5nzKN|mkFSvrQzLZPD zevW7SX(aX(7F_w|(+3SpOG>^9!$T6Z_Sd(pUG*%%#MzgQDc(VB#jxZ>6cXsPqy)O!qI{8R zq9?k=gmeyqpP}C6@oua5f0}1o$l#O(h({)21`ImH0b9d(^-{53|9@a^sn ztxU=hsdQXQ>dwF7zR%Dp>e}#=nyWDerv_-@vhdbPn>8YE)WkI^dWfK@M9SD+R#r7N z$CuWl59qv<1Xo-H{Xc}vi&FjD;5Ao^%ihqsbD!5dey&j;f zHqzZE3jb61eWLJx5;{*5{-@A(qVRtbx=s}Sr_g?)(0($R%y7t{ISDpetUVpc$}OH2dk}rg^@*fZxVXo)(}+V zRv{6mm*fb!EoBfX`}(M~JZvid4BQ6$?deQ|r3v_KJldDca77a9UxU&47|6sygCJMc z&rC3?Hp#iD$b|7PxdAval5wsi*Efn~p@JDd_LcJ=Zzfli^_QvE!*=_I1Z ztFg=fLGT53HFbeUY&7t*PycWKmM$(Wgm0Vh=~1P4qjHrFO;$dXR2&p93u5LzHu|Tl zV$EGl;)@COUH9epcI3L7I228Vycf*mFwM;K4Ho3FV5zSv-znk7IjyINv=@32e^3LW@uQF>{aNa8!LLqD4ofB(*_+b+-X$BTyQx*z_&4`N)B3Rin#Yziy zTGTe(nPl2B{ccL(sBdz;<;K(#b~lx@@MxE^^O2=3JhHCg zQQ;CJF6l5(BvWPk(cEbbZEY)~>Gj<}9*L6ZLG@+E!d=6Smk=T92t=II!sqrjB}qW3 zQt@SX)(Md}xSV6<20s9rQq}lJ)2U}M(>eGwlK@;?++}Gy-AuONNwrN?W7mA~X#;nH zLfFwg2Cop4FmZ_iW!(Ic6cfXeUsZYxiZAk#;WO? zuGZL0qq;)-%Bd>%dlw53isOM9D$`&VKNvNBbMN!%P$gpr%OBQXt|DQA(F`hF^^46W zdaZ|ZRo7eQ0|sa&6_h7U^3p!&f(7-t3k%U$IG^y88z}ktzI;foApI}q-a4p`@7og% z65t@gU4px7(4Ys0;O_3ho!~jRyCt~0ySoH;3+@g9Lh_pL@7{U$&YhaMRd4=yRb6}c zw(f?r_v*bq>$6r{Mbe^xq88nx!DTqkc!9+#GyOLFxD_4!V)3NCr%ziAS)uw=5%Z@? zEaF-5?3ktZU@g%Z5c;62c(kI}WRpf1VZf#MN9*n6Ke8b)Ps`}TxX^Eq%4Jw5*| zS_;m_wmpj`30Mz0ak?B8aX<7vw`S{3`zbmCau2K zJN$r-Mha!r3;eJSZl1=tWt%*fq??ve{fvyJ>80y9AK0UIme_jiUUko-=+xao!L9o>4E&$}@qxg|B;}CjOC@f_tPOoCNahYwl z-VhKw2yyYkyIW?vE-&PV9kDeH|{BWd&s{>L~(KT_u7McX=j!H$O z_(*dXEp~6~H*$#kVuaQ6-ZzvR{w=6IemR8{TyoGa49JQw#;0Uzva#6J_~?uEYkO5- zAf0e2mDetwv_*AYAO#xEeqVu=e&jWI#8M`-L|WZYH9q3x#*@!6rbD13#Gi>mkBv_6 zKs)84;D;kiKwoCtYPiHA=*cV?ix!bG7k7)Ch&>=gSC2A3+)d|I}S~1EY!WNcD^0(Kkf~Q#Ekz$yB7`!T6K;l zKLQzwclXUH3BJ3lB#6-9s%0r0mN`}F} z&)-=Q)KSuIk8JF_3jF@1@NnLC#b@E)Z2>XMqb+y;j$?liQH;#=L}z~bg?$-mV9+W2 zJ6i2s#gPg+>93fk2&=^K?~M8Oz9&z+-{pj`p~Q34Z2^IHT*kjF`Gw4f-U)nsBTfcKKDA|f9Ymc{A9C8e1sY{UICO-YA;5CI#Z98hix91#eMbRS_ z?SZgl-!N;RMlBM*5HulHy_b14aQCCeU6Uf5?w(9ciY znArey%&-V?O-k0>r-%_hf&+2}faielUayU#V(SAAUG4Kdn)ojfJx&`k-#C^r=y+20 z#WE3FO4B%jKDzs2++3%K)UW;KH`xHS0dko|;pDYqtXq$>hJYpOoTolM>04qPWbcL* z@dN#M~{aLbG2*Vc?WNr!$1sd~sR3vL1+l3#h6gas!yl^d?r>#%@T< zUe##$ccv%rBhJm_hZmYc5HQ2r$I3~H!q z&mq91rRU)P*f=>J-Kpv}(K9|dL74jdwJp{sxa+OC8>QUcy3#mvcr-Kco-_Ry zPMEQ*)v-aL$w6Sv?*3R@Lx!>Da2#YgiJN-!R^XF*CJXC<4&?OEdIP#q4hu&ZkhQ6O z@z7^@P>O9KcCkL8K&X{OH)P~#EA`p58}#`4P_%=-%85|H`L8#2l%01d-ZE1u)P1ARiN;t)M&u zb8AMyRTr->Ia5>K0v$D&@{3Q!8C<%k|KnQa5LIvc-yANPa-f5 zw%QBo7f>6~o5K^{jw%d&Igh@a>T#^Scs$?509J_Ody zkBstbdC5Zcc3~%%1tf9HJu2~?R2CNX{Zzw2SeN}>iEgpFBPTKNR(XMq1gHecqh4ns zW!;xsdNVe2)rJw^ONm=SkF@YPgv2Df9Fh(=8Ou0Eh|Agjn(r^xS#&@Z_zTX5|FDRV z?|72khCVNdTNNyHRO}K8vpXZ`e$-Rr&3ruB0wk*~-j$O19BcStG{I$3zY+4SM`E<; zvwo+@STqYdd_8Yj>ixSWh`Z~2lpQe)^!=j!UqFI?u!H{!68sB0_+Nqq|6m6jrlqY1 z*>OQ~Y9X}%+HdWar=IlVTvqKtmqtac>n#6U>j7U{>3NGnVQJ&qM<$@V^-`9cbNh&@ z>(reAfdjkRy7NoqV1^tpA}0TT2Nyij&-x@;b&hfxn59>-Py9QIutz`Zlw{R1TCZ!S zUCGX*k(OL0H}-G9$6Tl{rf4|==0T&C8gSUFnxO!M7<$rLB{ur_DE?#$zK z_^-m9L-e{c)HE@>>cd(TQR_h`TE4Hh?N)iH-^>Ou;90a;437NZyu}Z820gO#c200{ zs<;*lun4pQ8hXU*rM6vD&RZavZ3q7ih5t}*mI6@G*PYi9R3CJU_)EPjGn6KX%CR_C ztK(;p3)X>Y^V*zsZh8ND?H7bWd3T`a--4Y&{`4EI^=X0W7*qxFTFQev0(m-K(2ZLiEOKE4$nZlfkG z7!oz<8=G-0`U<_kLbCsc%PJ?JA?ZCi!s0GX`<5UPts#DLS9grc@(^rpnW2Rs&hmdwWLv2Ja`EdX{7qM?9C=VK)=jve(rBUH zlx=g8?_7)><$BaFqhH)*A)a?_1KRFdfocOJ0{p^@aIY2ZqEegK$T#S-T$by970O7| z7o*2D{q@XHVNvoyD?J#v@`R+Nv$gA}5asimIjV%H^&@KvUTzSNTTGw8{{@oR| za#65Z|6%K21!kb2`>^G-9yI2P`oArFFnHMVSr58#MV-`GANkLRw8lDcv^+&U9`lqc z%>0q9^2-xqacp(IBfOb+7}w}xGk6*F`M+9lxg(sNcaQ@vt@kqcf1{vAV^zifQu?2c zvr_*5&T&`D|F7defHh`W#FiARe0e{>eeO8q6RY7B46x1w(kq73syO6(A~VG`S!Qvk z@=5$!>el6?@eXMkd`uMdk{lISx?olPgP-WvBuPjF>ZL3c^j|m)y{g+KofLGm=mrAI zgH1%$32GzL>-3eJ_+(Yt%|upyxmv?2x-lI`k5;PTw~)j!>OXKMJ)VGtmwV;GXHGFU z+p=ovwUVmTby+-FFSZBT7IHd|hm1B1Dp_fEcmB040Q*uE?!&K=Ur-w2)~)J7o?f?J z;qr65heq<1r14GJ$-;Oo<~^Gn2iWn|txeK}5}D3JGeQCV`k~>&<@%VnoG!|uHNf`Y z%%VIS$HuH8m-FfbgpV5UB8OnhF8xk_v9|vdN0dVba(o&Am0l30iOWYBSc4Wmk4B!S z-yv){2XpbZ0`7ZKLo6+N;kx)4 z(a0y-nAL#)=7y(ZAZQdi9w6@8(ifT2)cG`z92Xew39l(+H0FXl$vFi>?YMi3A~ohU zw`AF=Oaw~BQur!CKp{VgsO@)*`?&|jm4}3!ik%#t1KCk6+%hm`rpHA)pM7T6igj1` zivAMIqGW*7vaX(F z$Y@?C>iq7(^gNN_R>u6{S-9x0;B|V|?{1>qGp=FJCq?pWOEXrm5Qv6gb$;*%gRskw zTFyvEQRqn;Fy}_OauLvfX~NDKP4DK{A(_zujkle*-@5AXJ2eK&n9R`Ff5q0?i&r$hBf^E*Q69d-Cmacs zQV0`o{1`wvi%Bg#-e&qwMu@J)n@Oo`Px{f&Dq|6Lu+({Y=I8F~#iTwh1qp;WWNcn(sFiYtuN)5qn~>k3-ceQhX{EV5&Q(_- z#nvO`Q(qW+I|io!%;>9kRM+5O$KXSX(;ty-{T;uJ@XRSd!;W*7k8c$Hb^005ur1>_ zWM-ONL<7%3H{en*_l}bnO4Wc6R;hre&2S71-^GjSEApnyg>~4K{`_0 z_y;bB?oJmbt2pP05UCd+lm7(LtJB`qO^7u#mGLuSE_^SO>?|)Dzks#@CBK=(c#t04 zAJqBXtAmp*3vK!Yu!E*&+B~5TTi@m-W1n`Zs(0iN*I@a92UBt<*IlWfk&$_#H&U&9YNP5y6Ra za@B*(L^Hp`GYP-P*y^3M!=J_nl_wO0h9*O_Yg`<1{CI13I4)>5EWqBqYh_cld5Y7n zv#baz2^@~>)fII1*R!1S-iq1cK*KN}?S)QWRO6w6SD%@8_-U@|ahN3T4qXiqMviap z8n&QIzNYL2X>CZhkuQ@gp(Xi-(g+4KI`Cu-CbNlRG0osx$xlF~HVtjU*%&azL7XsWiegzEkB@r;fs7k31w$Xu4lc(Zz>EIAT^ z*30EJHV6kl64Gf@>!myJ_J|fh60=K{OO74aD`TUHFSBJx7cq118STKjUBd~ zD?u)Ky+WC)YKjY|4xn9weIpn)O{NjUs=dFLc%m&a3oD-RkW#$Cj;o_%RdcpNSoQB zz_4MB^dfW~i%Usini2&6E)U^!#Q=G8SP76;P`_lfyzu6yb&M^s<^(7VLGw*XfMbo! zWPuS@+f%8D0IRA0(d2?>|7i1og+aOusvy9`VahUUDlNZ(iR zk52p6zazbZc%%p$J-h`|m|}SibO~UZjS}SItxc%6un5xk+3;MAmglhk z#2gNlr>7zYZ16KSnoD8|+i#>3nvqDiG)j;K>ZP|KTMP9$aDLhSxtQiZ;yd1*`0X3U z(Lr{X<>j=f2?GT;cYzQ>wrxSgyQ=DD{&%V8QbGbK$OGjZL||blba5vd4%@YU?nBui z2{?*U6A@;QhaW~82x)=EN;`jl*8cH5TgL&x@6zYA$u$km>VB0#U<4r64i}G?ZhLbF zBuzl`UuX3%bJY5R*U*tMLd~ za>!EF#-*{CC^+`K1^*_`!>tnGSAv+<7`}~6epp$ssHzgX2mbsH{9n^AP z9n_EHC);0(p!mB#l7M4(?B)n+>Vo!+*oqv47j(-a@6FD|g=WdGNLzGMw6F!Mr4Rwy z%?kTwuEPNN(YL&1_VuIXT8NIN=)?f4zc}5vGX#_dBj?%#EV|Rx zt<~)6buZacw=@UH3M4Y!At^ld7rW{i`=+?Wuxg9M6fbF|>8HQB=+}fix!1wjDxRs@ zj0HqER)KO6kudDM$!_4|ZNY?#_#2Z9pOm#f%1Le4nWN9189p>C$uWGM9twL+_1G9S z9Y+Cna+E2nB&iu_vg5g7?)_`Z2FB>bTupNhfN^P*C``g-ZcVu>ZUl1tPU&%+D^=&1 z2LN=&vG+F%DEsz8poeU z(`dBZ8)y$ZRA-B0z{W)X_uI!bif^9lyNtIq&ZZOq_~x@>bnd@CqYy}0L6*o14XI?J z0a$w653}^X5q)b`ZE-H5npFVT&B{>-ct%*q>*#Ip|72vkQbvo|rJ_+Em(|e`DkEC~ z(6KyZPPMl8XBkxE>_bM9P#pwzZn%7n7m&#gAF zXZx59-?Yk5Jh)BM>*2Z+{qZ61%PlMQk}w9}=mpIq?Q}d%%4LO6l|n zl9|ojT5iY>J@B|zjIHQmP}*DoxFkpdE(z~W^1lJbrcA)tv;r8LP?R#)tdf3Sd5om2 z%@(wLeBA&YORsgrWK#CJ+?j<&9B=&Nn6RP=A8NX}z?LgA3{NTU>M%r+VTZZsSRm5q zL!^9#bKxTa*tTBI?l_^vwS}V6r`{R(nP@XJQ~b1%SMlt_BE_%Y*-;YqZVjJ?8L#D5|>ur{4eXMWb#0LsMnS zlwRRg;i9(tzwQV$K7++0DC7LcgS55iG)9d}G@z;e! zxyI9y`6L^8#?$t;uRStZN;K;;c=pcRfXf0Ea+xf2itTA143tT}a5xGDrGD5XjLR1E zO{{OA5Bgf>w-Z+xn{@?(gn8vt+iXW;&GNIlYEezxzI!!U9}}mxmSZFwHN8p|7H*Fu z&e!wtVbx{%S{b>*_hjBlsgVttd9QsWhxMtbXHkCz{4*fdA}Q6Due~ExBW$F56)>jH zV>)gBgFS z3E0y70BK@6G?S^1Yg;I?VIKjmx?2M7?)H_~v&-TRL#<1?Z4sT6+WkudGYuRl+@aM; z#^o9lLadXdX))GlP}DDpKK;T+Rk#wa<*fFz8cFGeiOOv?{k7166vw4O1&(~lo=Y#o z(4ZD~#oy!ldgk_8>Hws4?qC*&917KAlsq8h2xkFQ zX4D+vj=@2iPtURi82*aiez%jctN5b1jwU1=P7<@}8P+^c<*BW^1guMWqPbRvP4G0S z-&sy_0Zf457HX0MAs?CyKqX?QC?)RPuJQH0Tx190@HhgY)T1(*sL1MxYr0IeEF_IyyiKVHMRQY&54iQl0B zX>(*>w+^{+cirU)F1W&sC#zF7%{WQE$RQ|IVH5b@?$+$8S0M>x@`><9`ZSkTDSttW8DzAo>HoIVJ@kK$dd=4 zrvEF=&Xyyqvq8jR#%_DIrvK^3_ygfgQL@_o z+Oyv*yh#1lGayjoO_yXTn8e#~Sw-h-o2=8k>EubxyiuxNhR0`#6&r=I2f!@cdNjR3 zIrZIbc2RFar@{@EeX$|^&z1Z&ku{s(LB=jG8o4dZU>ctK9bj`h0rn5b5s{eWBzx!pIRzqlG(=58l(83$4?6F~X-z-sd)5*b+ z5mzv$ps2g7+Cb&doN!9dRj-_OQ!4dY*TE!+qm+daFq_&qxZ-|yNa z8H7Q|$n5ZmjM?D_g&KwTM<#9u)`#g5On5(?mdJ^H6!TL7F?Hml=zBt{lVZ*1WFTEC zXXSEOHjg(O;Tz?CW|Un}YQ(qEs*SFla2ktuO|&!DO)k%~tvjkUB{s_lNTC8^UzZCO z03)7&5l)a90EF<;jxVR+fo@P(FP>jz9 z9X=aNS;V4H7N5C<1w8p~V$o824<(J5J(FeserQqs&weDUx88$gf@SbCrGdcbiGIUn zLGcYRFHMMd&=~gq2Aj){_6G7N-uSJ&`9q_OfKK{E(#|_X8Z!tpBbq|&TRoT(x@hSZ zbV~^_RdZYL_^kHTR0$o4G|B+*^J4p|EcwMT+(k6_J5k)uEQU?{`vCFdm*S9!M;7cq z`{t64LOgllG|b}bWwdJ;wmwy*5vi9-qC{=${9rtJH5)UWU4*?@#!o>GN)hCa=FLHqjwr;^7$*tIKNMx&J zqkU&0K*ShV0R22mm$~zu9)3~D&j9Irt z9|Ni21IR6571tDKI(w2#jiX;mmgsr-kNamQiutHqm8Ditx#MM5+_`5KXqwf#j4p#j?%MA~nj(c`&SA+hh+kgD*_gOjZW94EsHL&myQ$tsW+){&?&N=~b;;aSHIGSXoP?_-$mM{Ps~?q9 z^cl$)#&1{W412d8$k4%#DZAnzKsX;9gb~p+v))6CE%^yP`SX1=CEF8m@k7`kZP7Zo z=1P#Drl9|5+Nj`Ldl^}H{5v+p6iitg<+o7zm#&+9PU}vT)+8M*DUQ&bFasqz_eKnD zS?EkuRmh;C#cp3Od=gdU)oqaeBWyXgS&>c^Y2HC=-8~`>UU6h}h(K3~`IM+>X6!Srp4lQZ>;}#7?qYKT)Mr=CVJW z3dWp;B0D42$R`L^K*$=LMQFTeA9Z+Vq9gUAtH+u~R2@n1x!^W~uWW@71d5~`q`FD& zS)PluA&WwvXch)Ou=U2Fl`|4)j{_D2F66I`-Kq(9WU`_WiJy*DFbMD1#&Q=ijqxJ8 z`sToUe?8Ox@4hNyj25}7;fE=C!?-!jt%A(T@067c;kV9fu z?E+ht<6?7N_yxHzdic`Ow*>0<+3S;^%1w{M@fT%!LQFM?h%*9}QIYH)cwDge30p858h8c&ZtlTwo0GJ!E~)HlA0 zCF;KimU!aBHu#%*9^wCyyueqXjKl4QDWajid~`Se`eu%T4eGAc+UFskKE>0t88G4C z9|X8Uv=9tWw$|hrJF%)LXn2P=es-3&SjGkTLC|K-Gl40KwM`6P=qE< z@w&5FO*1#+`zSUoh9K+a{ttgn@f@4WuU@kyxf=kT3S2auj&>9WI6{{oZv+3oiknh! z<#nH`9K}_O)I=LAMDrnCXvs#@`AzZI?Aci(6Hp{HR|vK^KK4_SySpk2%ad4wX!#2k z7UAX=(A>DoPc#{CH-SB8mNZ4rsod)>^Fq%4zeQ#{IJ;XR~=#@%nK;2|vfw&BgN%=RXNTH$aMY0A`j>W_gqIawo7+FFPY1*5Ia%St#SfKQn*U_rhHe9CN&0H3mQ zz^5z;@F|l$=Ty@AQna|(vD^8Vma;ipCgh<-k?cOd`LYsU7q_OD-|n+sKjOt?k1IMu zdmj9vL^%QyP!rDj&*|zvr&x<9We8=CueD^a9lQ~_6^kJ(JAAI#S7y5IRpgzKCkX1n zH@x}bEY7bpRLuvUr;#40C08FvalBCvNoZp>PV!CLYK5rX;|2oN%PgSEh*YpG_YZ)8 z_no-!#MR7zy4haV%a)rE68l6NE~0*K7I^ZYx|{;4luR7g`RrRj|IFTVms@%|2D{i* zTFZi|J5@H?Dfij8_Me7@e;Q)SUK>zZrkl2&{M7Ev1jqq)je;V>=@_uI|Ep2JgAO8b z9goSdUr@o618}dH0PYo%4VRLRS=pin;g?NZ&KV|*$J=WaNQGpK4-P@=Yv$LArWQj2 zfFv$DK$e+|Rw5ZAw!gBFH$-+_b9d+%E@vm`m6;3QSji_bO{^1>oqL#3A*m?sGPjUN zGa0b~SXXXx`>I`khTY`i=1vl-#3k*aO-2Y&+})B)M)*ZV-Q+%`jOyKH;+`F#pqHL& zLMri?d^chL(orsJ&$NneA<;D^yS$2XCM!L%%Meu^+1A(*NGX*a1FS-F??OB?Kn%8) zent#PD5!48_YLWOtJIMHPuqNaC0aA7vMaheLMEDuZ1`}V+AL5f{Gff;GapYrL(*@` zQ(;ns8Glt=s{86?sRwURRMX(9No`PSExib}YP7MU`PGU1z1mpayKC{4$lL07e>L4* zlBW1%umIu|Wh?#ruZM)~$NOXoRW;c`rGGLdW=u|IJt_se-Rpz)R)M8}UpZ<)e8&!a z0^DQ6%UMn6L@EtkZ?7);`+Gu%QlEwChF9K{hZM^o55=p{UWlC#^QvhOa3vlZsr?j#FO;rmQ2n-Pi1ctzNo>5Pp0s=!M z1A!qz&Sv*-!qm=zblvv1uYuGOQ^^@Nk<0vh(%z)A={w(R!U(l|R*BJW)E*z+YhJVEY^Z3%!UoTMQJ{6#e_AJT3}L2r&KQT-?K2rha1G2n$bh#y~tjzD;uhXZ%irK(v306D4|6EDiAjmv8+1CT5^ z>w9UwJ|hXA)f4!7!{c9v z{j$x{o0rLo^Bnfk?RO~DUd8VMP*6uk!UNVb3v_@mDvE^F3@*mB!&GKqB<92pn?Wjl z@a6dmo1)Yh?a$d+uq66>0GsEHB;Y4*vKv@P38x7d35=2FtP_*sCj};S|JN2~Qbx2Z zX(1Gr4-D{W#&8B?a7VY_B4bNnN*A-Boia?tGCS3fHP6sBiG9gNGe$p9)#AWHVF-qy zx7~>ie<*JWmo(JzKI5y%GgxQ@mkSmz{f=>?77uKN5-7|qAA8%A;an#wQ?eTBk4uWJ z=3l?wv^9PeN9QV zBsX)1MeBBvae6kzKJenxJ46zw{rq560JPjp7`e|a87rk%>BK@;iEECY#8IB`1Wl}_ zpC}`iHcPNmtd)4k1`NXS;kP)yCF>snNrMaP6_7~2sM4H`NTtC8?Cp7CYFn-@v@J!h zgCO;Qop5j;xpb_NOJXPdS@NyU*CselJ){7|WWu_J!GrHNs&}K;2!{ijO)75!ePd4f zsM>ab-9!grLoL?5?8tdBe#Js(9CqFHbn?_FAneNES9-PArva;NuBi*Hto@y~&KJ@C z-cn){Ac`k8hVlkNyY$bz2f>rhsiPOHj4^lYrd>h2q2zqAZ!1k8NADM-ENegijzigI ziuj3Y4}>Tt*VI@F_W)O+J?6I)?!wAyZ2SXp&?I5f8=;q_?6N8ZqPmf%P#;P~2E0SM zjP|b3d?~n_;~@6k0V09-xhJ0uvx0}0f=dE@rX_f*SLI+2x*^25n)Tl4#vAsq;T3I4 zn0=_%1(OWJ0{pc&iCtU!@{f4-l}QFack_Jl8C1^xY6|`kN|+};vtaV&e>7K+#JxUc z2Um^2pVs22y74_n*}u>l%vSK8<*c}R-ML+m)Pk$YLOK;Q`CWYxkM`@UoHtog6`WTV zTQrtL=d274{unoB9L;u43XUMeAs8MAnL~|%U+Xt4f{VRbS`4&lmox8O&ubdd@wpz% zU;!-28RP%}xNZB$ zsv1Y0!Iy$k^*F`nwRV(q`sTg7*nk5e2Xz?s-NXEZdn7s>x?KKilJgv?^y1ba=bXWc zj-y~s%z0ljzyZJXL>(06e`;BC7iDcbAnpp)V}poLQczlXoac6&g`Qj?du(O$2{+%L z*E-7KGO%X5QrbjzNlwQXHCuSv8g`ne1>+ZH4TMW>fjN@{Wzzl93@U#XLKs1WDzc++ z?lxCuWXB83Lcje^8=j!iR&NsYgj@rIC-+s|eE@dYcnlYC8;m0!iDQHg`#~-}_N@4C2-Z z7N_oJN+a6ab~g&sD((9p@HIiJIw6}GM z7#4`d@HTxKn-&izEKrqUwtye>V9vD&iS0zkhzdoMjqsrO2KcQw5^>d02q~lZ%uL8?zR4nbmayFTS?z;K)^bnNi<1~dvriA9XvhviVui?u> zLZ*c_5O>^pAt+Ay!3lm-6ar!rKR+XkVCEDJ>^yNGM=Y|n^pS*8Qc6&&ZPo^rV8*H#zT)`S zGdFLU{OsFeR^e4O4rgsJo}wZ}PYzgkG&ff3UfX}!&Kj1Y@$t9$7F|@Np<(*?es#^r z$~p0EkN~UcJ9*FVWAJNTA{q^NrWZxCnTretm`KO-o*mbUpg44hV#K0x$&J?@JPRdX zm6yGK!PH4oR|gtz)uNCW+riyRRa57nOM%w=64eSNp6&pD{KBq6D3Tq#Y3XbER z9d^54*rtJ1%Hy>42jq=Q(()JlZtdf?RZrYArqj#{kvs`r=fA;--n)NDCq4K7&=mm5(%jDY3)`22@fXa&sTkWn($Mei zamJg@TYt=9L!Z0iOk*)0HVwSC{t)th{vzlQ4aCsf`lEvg|F0Xd3x0lm#vIPw{+Fh6 zqUNpz@v(*1N7Vi&3P!EpZv<;z=Pw5$Apo=89bmRs0L=FL32B{Galp0~ z4cOKi7p-#}7u9ztG}xa0$DI0&?LFfAR|#QKK4q9&&gdISOO7bLp^tWUb&QLqZ>^|h zb)p#z4NR1k6z_vRW%r3vDnz4fJ&d4{sM8|JN|{lPIbfI@V#dd};ChpZ#oD6r zx!+6md~INuQM@Qg?H5!u3Bu1xypwV6=F^rO$gApWpI^TGq?P~89%TsWOUAG&numJ9 zEaglrsZ{6~ zl%M2jSH!3(*~rVX4^S+Kc9l4*E2GwhtJ!H0kZ*zS(m}%<3%T01DT5$0$z%bK$=u>m-fzY24STgq zH@SSQeVn7{@oeMHtJ~$utildg<5m6al0oS^jchjpzYXD>>^_$GK*TbEGft^OzAfn5 z!oJ+<@)+1GW!j9Hx3&qD?=&#%$@BR=Bx(=`40X0UxzOcwlOA@VlEe1B_9jYT@ZEN+ z<-JvLXRY(OTCzdghF0)^CuoNRx(}zjDa7A0Lw(ld7UYDUproaJh`YKNDecSCcaOKfLxj+^;fO5 zES+T+K2$~F$q~%`818c;hS&Q%7D~{sCvN>KglpRwQ zgW&NayWrx8SY9gTcL~LjX5#!HcsP@*=0-gDM|?mRXFC>zVF#eRDLMnatbWXXiDc*O3VLNdA28R z7GKgDm@@005?Y)aJ~`5@Ps_9*#`=@eQKkJ$F_u=7-+pt&`=mpMyEm9GQzw!| z7l16G>vDTJ6#oLmSj+92*UyT!<VMOBrPKhHq{Q5Q@)DaQyk(urATi-V2|H=7(7! z7|Kc6!cO5qIT_4DUmJD{(J#V(5^U?H%SiGk2)A|&u@JC}LbTOT?ijg*Lke%$s_33M ztuQ~uZiW_wa&Fk$s}8uW?u41mODZ>nH|QB_LDo~xh1M%H#L(}Ukj|Z3j?qp* zgeeXBup8GKI5xzo4E;_kACqHOQ97T{c}#Y|WH-ON%OqZONgm7A$f7rt#~!Q`qR&vGVfJp+lak}g;h$^wh2k7>1;4dx zkAq12=}r}J)05N&+2zIB0zdtNUAu~O2Q@wEfl2G3xJY)b1ka@c&bt58yQP59Z+qn! zvXp9A$Yg$2#S?6<#6Y8Mwq4Fn zn_)RGsWtr}2LHQ$32(?O3k+(eUyb@4KjCfFI!fg;JhlDLY&n)8Uu}QH?7v=E`#7cR zEmbx;3-EAj*KdneGu~cz53hhM52KSF^7tAJk{ip}OV!e-eMzl?#M5}jf8KaA(d!ca zink6J^tZjWS=B$Dy>t;74z|6;W?+2W6Gh?EpB@`B4wt)iwaF0(KY}lZZjiL=t?d-( zaW44Pwxfs4shdi|i#cGw>gbyM=9@7-4NU5Q-sVikiRqV;;A3kFsp>if4zgA$)gDt2m` z?ylafinoJ-4+`Rb{+YY=seuAluRAOPIwM??S*F|Q?{Lio1uoTAw*<$2Q)V+Q)K_0L z6fsv}MO2`-r2l)@pSipzsb5#71iRP<7|zb1xa9@dLaWY8$>5$%w@cL8%5!AM!jz4o@iJEDB!~~rF>0?{5H!LC8-RcedE++nN zTc6qH2g-kEmMP8kW8%8XFu~3+{o5=Hi1?G#*5mq@)!*a|=>E7Mmr8O3vlr>ZjSNz7 z!Gdxo;vwLkZLyS11%^|Jl4P{OfTuP@{L#lp+r5l(oc{Pn*VaE~<^kpQKtJehv8MBv zl`d~XfhK~?fG58pk8@6crRB1nYzCA!tULsf2VfYy;I6r7CpTe9;iuTaVZNg#L^{ zkGG$*$V~e4N&FLKu)h3&7SXMJIwlkm}Mz6`CqBnzue^2 z>yM!NH3${?HOdjkrPo0ZF3#)z+LNp7Z~U$Hm!Xf|2vq1!bss4yQY_Hq2gclDxnvv%~mcpZBikB zg7ew-d7C!qg>dC_jAoZH#t`c!P^hfhc;P`epV_xAztz-Dn=Ebu5@?NyOb2h65hC4qlGpf(WRZqL6YG9mU+yi zUHy5oYCV@q*zs3kjD2$;yK}7S1s*6e58bv>MiQs-Ukk&C|fEJj;|5MudjBz z;eYsNZ0&47tohVKwLa87{Ng!(kco?}G|2>4rsj#kQ|OHor|aF#Z^r&MXAMrR8vSn1 z8kkyD`rS-C5c6NMOUWyA=c>iQTKcbf(A|&6uy3A0I1tot_8i*M*uSo8)Q4HSpM;?) zQD87RStVe(?@3Bq{jJRGk>O5RK9zvbwA=g}oG}a&gcsm3Nc#rb<2pmzD%0`cECZlM zT($6-PKX;ygk(H4Fsi}OxhUO8~7eHXYKwp zJcr0@e(2BJdkjz|??az=c^_MT&e48s%aq^S>j7!%2O<^UR0w6h*~gA{9&8Wq{i00Y zsbLL0m-7x`pnW2%=_p}2P3u`v+o+tFT#7tPN=Zk*@epetS`W4 zKl8&h7m?RVCCklfWEM*_TB$`=%JCfipewDyoE15Xc)(Qlc_SXkiau{B16kfB0vbiz zF6N{T-*&qhW~V<*+9ks6E!>jkQ;IY7_xH@~$rHY7RNrDi56%+8rdwGOAAB*$(3(Z3 zW8R&wt9oN~3Z11!$|%w^gtBca5!vc0b41aDkL(Sq;oKe@idWcV!;4-<@q(Aztg- z3QJP-^vUlWO}HYU$h{ z?S@q9MhsZnNmvDA108xZEjht6-!zSslz>3(yBVPbm^zl|miLI&%jDOzDF);$?j`h` zYf1f$wbb)j{Y&hw1s!VRU8?3FoG}b0d&E5Y421po>tR0i#!(iycGnS;+i23rsQqmxu z(%k~m4N@ZAAl)Gds37_rzQ6Tf>sjl0@w~Wu_Uzev&aIg|M+YbiafvYJdC=i#hH~m+`;8*7IUX*Z7c7?n&Mi|CBMKq*0Rw2JCEXM z$_xWvONNs?fBwY5Ka7uYZz}WxmGltIaQ-G#oO-hcTMP7OG+6gN6H42bvCH+dyZ>S+!{PXV|lBcO!WkI4*Uix8W8Y|ftUn_7#weL=OadpL9&q%_ac}(gFEO%1QH%WH6gdPlo+a> z1bC}sh!XMO0qT_rz^%#R14)-T?X6J~olC}j^~jq|2pjvly3*m-khj@`s9}HeZm05~ zsH|*|ev_t6+*2rO84gPEr@OE_YPNiqN+>F1yQt8i^?j*hvl;lsOP+k%=7s!fWB=bc zcMf3SppMB=$XVCqrD~)$JLiSKm!hA|9c>$wL*2%R!4=p5CXMe*eB4 zL%cfwp#_=%J9$6d_4*g*%nrq{wa{86o#oplDp~t^<*KLJy}{^vUkUM|H0fgSaHTQa zFZ+>Ze^ZFP?wr5`*Jq)8+O9UmlYMbf!9w2?{(||}g;Wl5fL49)59hbF3Y_`hA9Kl)Md-FB)Z!&k&6b98I^$wesEBv5s}|he7Cso#&R>epvBz6@fnpZ)UY4{ z640F`$MLwEVdBhgAAb7%^I!O;YAov5@5S}sNfw*Qf;{EvS`RZjsr7>PzNyBJkNYy^ z5CjmLud?(gW-KN}QEk_l9{bEt_-ZlDsA{2|F1mAwF>h*mWcBrkr{%b8nt5dLOKj(i?7Vqg(nT8iKy#cfqqCTh)oT0=tQ)%Dx$ z;CS<cp#1?oyBL`=UlB#Pd6ga(bL~KR*6Q_-n}1-o{-?v3Hq8+vsY+G>Sy8tiZ2`&GoJ+@Iwo;ugjc<76V+F11wsW6eAG~j zKYTiwpy%!dR6+XT*e8PL@9&9M-os?;v{!&mO~Zm(2e09!Nn&(352 zSH2}TGoQba>{PWi?%mG}eIxm!LiA>l0Uq$HqZBgJ|E>9HBHrIx_YlGFkMHD7k7Im3 z@nnlm;`swF()%Yy4(-s%K+m6}wSSa6b;kcfIw#jt-r2Y%v$YJWbr{mIvNaf}H;wfh z*=Pz+S0*$TmI{Qnbm&*K^>x2QqZNJV_pLX~11cApx|qbK z#kj<)XXp>LfsQ4pQtJ$>TF4GZ$tl8KqRP8-uU@|^Bs=* z5lP;Q9%3FE(84++FevCicfh{Qo&%{vz=notAF~PhK`w+t)~)trj5{dIwxdz{6tF6s zv1_9ntzpvopFR5STBK2M&|N7dJRfr znWUQHBKX$6s;~2!abKLM*la>O1F`~cp?h>&)BfXtbk6RpDoK+Dl9V}FX7HrM1S z9S9q`|9UD@#p``>$vkn$ixQbtp|BtB*7T(LfzVjsBTlqvuFkrT$Cd+~+P{dC5?{gj z-5Vk@QLWIt(zsM5%zxw$ZtiRK^VyO?Z-$n1+JUzNdJpCzWk-w3Zj@2BDI-8tF=GcQ zR~vifdZ1$zO;>nhZ-*}k#3##Pd>G*|R&E*DC64-d!d(aIA#{;9aWW>23z-#3PtWpV zpM$hh#mA6dK=ZVzj>%urUWd~Gd;=a#EI_eZN)0v3E$5lm)?$OW8`~J_5cXY?uzUmo z)8smvciD`h6O4t7p9>lNoF*}S%>`I%V3thb^J=JIMQ%kfhYz3wEW{DorC(pY%Cv<4oXkl={nx9wOIR757nL0mXI$Wn=uV^C3bMq=pxSwineih z^XUTXEBvC)`brtNTF|qjN0(@wIHIipVQa#pQ0`I4y?krIL1_aBf2BSO%^!v0tEILa z$FET~q?UB&mVI<}k|glm2&SN4Z5nGIn>)0W=9X^}I$Ezpq6n3m|I-4hmu9P>+y!qx z1k_h-HUe&|jC~!BW2aTUqx5WACti5aXVL#`R%KP>a-CPXg$!D>(t&F&m;+kbAr<8x zo#{#oCtJ2M03oT(qcH1H7+Oj^DXb1$48Q)IHe|NQFX&hL56bI-J-ri|#KpF3!Uh~* zXr}=~`ve%;w_{QIMxwybW--3e(x1CV%=#>HG>1j6!@l<(k(HvaV*lD--)w(_L7?i( z?bW|80@hQ=1^eOczF5>cz)it@hh0DUlKq-6B3|4TA&qR`X_ksYVKQ0#l&&>=9st-KRp(%}4Qpm-mAItQbqre}Z2LJwZ#KB+>vG_(16{oNJnylOr zlU;`uww{lI4D#HKEfrV;4sD&IWI|9QJL}>kp*P>-8+qei<9;eB^UXYxjwJStELvyU zJ|iHuj4QpT-lvl48dv=(R^1TT9+qkDaU!f&<8}nfF!$iicR>8)`KY|U`PEtMyd^uC zHuZ=Z9W?xH(Kln*-Y>?na6`Zl!Xa1SH^jLSa@pqUP5((N7}C0?E%q&4mo|`ogeLVz zklbDa`dj7T4l_+L*Pl9*t2Ze>d?fZd&D4(q=*wmMR_9ZGcnRzkpuaVh5p(^dF}b>z z{KMzxZl{@)n5&2eZO99Jlr~?FjoRFtPbRD{dp(bKpNL+=HKUq7QL#R_HCXjl0Nr17 znTY__YLlxr$>wigFBYeZF>8qE(}~e;qByVqvp)#vxtG~m9&GrRJjVJ7`xW%!uLg(E z`t2KIR+h5A8ld`cfrk%*h&!3lBGZ4Y{=ZxIh7wH7|NOrS1M}CCw{PBe{&F9Wq5Jgz zUr6)PN_Oe|V>O!GNh6bS@xKJ1fd4am15S7<0sZun`c6j4ypxWH%38+2ssG`$ar)=g zrgOha;*agFJ2&%A1JRAnVQyXkCD{J_|0z1Jwr7El!@^biZ#MVdbeZtU$k2!?`Uq|q zdg39vr`Dpa5A+N?_`|pln`|KPVpe^TlX_E?jGgk;W6 z*ZrS0$Q;U5Nh$)v;h^cbs8e?qu6y6CMECQX*>0827m&EE!siFvQ#Z&`RWQyDp&P~y zp5&c)xI3n3m^=D+q!qa@^kNEorRqP1@4PpEjy<*`#1{jT%Tz4lKdrAInPY-sInDr_ z9l&W)c?-$oJBKfx5D(uJZS$Q2I12fq216vvC&>+qHSQH(a^I>1C0dpfs6?61fSB=# zkQTT#hPJ-CxKclS3<5hO0u1$H43nPC8w~P0k$A~t4x}KPtV_| zr$HLUnng|l{tecR<&uk+x+gsh;M_mHFKpQU^OPItW^m$3OEwAQ90{4>33 zJ3F`Wi1i7(&?O;Z3dq0A>2ApAhk88IP116>8n<1z3OaoTc_w-#+O58IDkbl%{R#B` z)L6w@HzUGsx|oK_)dmp2&A;(ZTYC%S|`vMd*ubxdik` z6ly%Y%lPD-zAbD-ix+T3OZokmlht4G)BOwo!EMuAl*3}$m56VTOU-`O5~c82vlOS4x-Z0)q4!7&x7248QjwuB*-E2+9yx(kBmfp^O?+Q z31M}8;$Cf7U>m4-XY#!G;vNUe1bSk*C!3Rs{47w}MNcF*DtD@z@KNYBpEOHHgiRK+ z=>mr0$%UwHn<6+YaxoYBxK7&E@Az(g0$Vkz+f%}TgJ_8utRXv zQl}U+6u;5h7m_#IEX47MZSUQ)U9IZ~ff(miq6_Yeq`5+jwZ0TQ^JNf&9o%QKf6;YXFLVI%8*B|U43VurTf%{Fh1o`valT}fPbWfy zp6&?f92)(ugted5IUp`_)>CvB`XvtdpV%*}vZdso?lo~@8TEpdHdQJ{#?Tl?B9Q~*aNYPDhR$CiIm&CV*=QC+H$F>=P z*=2LgQieklDZcmT1<40V?~1?UG*euB6q<5suZv1@Z*Pe=T&9)#rge%tn`OcHCRr_t z6uY?cUhFRf+9fzo&PfjCD_&WZe_2 zpd>FeRh;TSnoT?Pv|gL6W)3A$n~Zyfkb%>CTDc2ZGdHyMf(pjzEhMr?I3@kYEKspm z6cnC%_c%%@Ih(2UUa4{I`>gR95uKS1_4-z^%<@Xecbf=hNVoGhvZw>K($6CFUCQYB znZe7n<&^ZU{l_jwKhvi|n)pWobce3ThcC+8>YeFsp%UQsEq=h+sM~YeTP3^_yc}|& zAJ>BWW4A*u)Ok(vx6Aydv6RdPN-18({#1gAQdZUt+#1I>s~ji z824k{g4iUehp)V?pOX?6E)${}Z3iw-RZmhgZL-9Fr^D22x!SG6f)0*U#p61Yvh{G< z%pC>eSAJHF$L$ml+jKnPPquJ21$u9hma+BF)oih1LEi`ooY)2B(+P-yGCr%~ zN!Ch5oC_iFh;Jn}GO6$OSdw>8%P-1-%Rhv?wk(uyM*7}`XK@DpY7F_=wvu-X5VVa0 z2a~rKoPfS zf!Sqc=uY%mRF_Ag9_b`UXk(OqPzs6Afy2tVaml`mR4|3#<~6ow?JcC+U8MD#&XJQc z6qEsGA9eMkVz42xvewF(P7^g@qWadxJV~lF?CWCWA)^|~3r3`Q_s&6KrfWRuqj1{= zPc66!NgH{@fCIL_?qK_0)J?fpmE&K^lL{xD*D;4c=5|V0i!j?47*iodH0r@f?cAc~ znwN#m&JX@{P>1&`--WO0pAT`ynsD*)^s;}))@6_?#ec05HHx?zY44*+HBMhA09@iP z$UN4N{vgDvV#*8Gm(q}1r<{u|ye5jat^9;qtLVY?Suc|7q(>a@ZRy2loPeZb#B3qdR*o= z&w(Vbj>984$$ryo8D09^?@{?_U`lpRJbUTF@?^EHV9k6senWWdjG1l8p6Kr-voUCx z$@$Y5h>je_A5UFsq z(Z=ZIvP>-;pXEH6h;EwM(~}suf83!B4T=%%@4kZm0PnVJdoS-!_RR2);{vOKz&&?* ziC6tOe+UQ|p|G`Kf9w6-NaP#^VtRkF%>gh0-%QKW&`kUg`+fA-fisjN`bDoFlvz@Y zNa68p`k7>bEqT2wyupjtXl)jPGTk5VJ@5swRnc~5=Esi6d{$JFy_AXma^=qQ;$(u5 zv!pngy~pqJ^#r>@Y)1yMfw`|`H|^Q8g@&>GEPLX7`T2ItH)-+RO809YS}*X62Lg%y zGSN#S!(~B|yA$Y{w4zR9u*GqwFaa%mp>4uNsM(sz4xj!rHKQbW*5P=*1qB`2 zH}YDnbAE2n*+vnEsYaT3qoVXY{yI9sk>e(XWx+Q6SrDX@7U3)dDN`sp$QbC!F{q*A zsq_37;zY5Q@{Zd*nQh^-S_cq0#n#{k_*q$uZ8Y`g06%L-sj8-lgAR+I$laoIp|1My z_&(HLh7M<>HcgCzH&cmt5{`5-k4nCL|3p_QCpJCSE_}PmE+qtcjTRH!$O?7 zS#CsCHaG&a^XT^mt|a~EaiM~5zkaI^>yT+-BaZ@Cem^tFn{a&bMi2R!vr?caa=iDd zXas~<``l*jm@9&Vri(3zHfPg)x^A@cNggNndM?Q1MB>@Ct5XknnFW* zbPdXGhShzuil*OEwzV$bQ~M#`s@3x)*cw;`9i1xE;b;@_QJ0&B+G(V+Bs5g*WwV!C zeS=dP9-eUBmzlmkv^FDg(WNkvackR@A^XG4*v1@On!&2ihlh*H>!V)vM#0VPc4f|Y z2qrCLB%ZL!Jj-mK?dbY0?hI5FJpnG&8G4jY#{BfBx+#SYiMSOL&z9X@|dBVlILyZ)_=uHuZbp=A9iI# zOuq1UQe9lKXY+1PbmJygYg!gZCK@R=%o%^&I`{>~P54$>Yze{2Y9qoOd+WcG0Sj=h zHDfwIu?Xz6(cXyRLIVfgi15YvTbJ;Dj_0CM&=3SuE2%nvif4>4e_|7iz=R`WVWF3+lboUYx|0036Ig3JM(!PHP4qvE zXNKQzHTvJsji3RWOJ>Ekb-zaV*Ggg?!V6#aw(h>eJJU1r)!5+;&`G1jU0!iNEgHF| z*==y%HlZDl&f9&qe?yONlX%ADvdN8abN$#UnLpPi6MpmhZ~V@Y7tR&>74s~nIRay= zKJMq7uGd3iozHP|Vz{jP#pa*OoSs)>#N0&Jt{se}?G_i5N~^R%&Zi1{Cf zRZ9PWHR*qNPr*?Absooifz>_6sp?}#tjK5X0NSGVKGYDt8MMOUg}Cn8ZZr4@f4Rce z@6Ed_tcj8e1t5Ti355TaVpCuQi!vPuPEhBzHy}cO6?0$F0k)x~Uwx+R9F4M m=H z2w@yW*?pm(;-7f?&x0!l6I@5M;Riy@@7`b&xU0`pBm&^^J&lL)&#_xv^FIC!? zR6#DAay8k-?u6rWLbzQ?=6V@F8CZ*Ov*|^$ZnJK>V4JA>dS|<|dY3K;W3<~n6lxT` zdpXVKmnf)KlGs>zuSs>|$etCPNnl~|-b!OtHpS%Y+bk(*>Z8n`P4L#!rPyG{5dFg}d z1(i7Jd{6kc=Om-%w+qGBlSlHYy;&1iY|SfSM3F4(>4Eu12v~0?)1_Eh_U+(7&U{`* zaRjrYs|Xa-ndYh09Hm#p^#euUD_Me`#KSefh+2dQ`fiCXJp{au$W=plhI6gtA+8uI z$^+41u$d~MHA`eNOR4|#pdfEn#*Q43XQ!Q|I+@zUQDIb@sUUxP49mX9^q?uwcp^u1 zx!2Ep9acL?dibY zP-PyqgtzPQ_Nj)fYt|H-s9vexghIMuaDU? zazWbdig`ba|)sZPedg-Ze#8SgSF_M%AG^Q<=fbwZ11sXm1kx9JoQ!Ae2$)L zqlq%JLMSIzbECyH?=D)Qu&dMj1EdGu_u{$k}D{iZ2Sq? z20q5Z+a%iG-yL>eWl>wJ%Hv?a?%dbdeIG`^O<2{iVkKb!5nOgIswcJ-v3fl_@| znbhdVg`X=w&6h?VS4Aw&ahJ${DA&NQ9#Dep(rg+G>HP!ipuR}o_&{D^sEmsO+EK;v z>a50>!xrQ|#y=%rx5EZO*vvj+l9M5ZV5IcHy2ER^t>)4uI5Rc^$#5;XPs$41Gk6(VNZxa!ev{b|o@)Mfnl`}MRR%pKf|Dn2H)>8CAg zJj>2)W`IHupb!iwJOBzE<1T@s-n8jVEs{J+PP7R1Ae7@RnhD>B@{HpBU?odWPiA}l zHuLvOSKPlj%T$z&@zPV8taUV`+!U2O+p%X(PW0D93{;ed3MloCd6>_hR*c$uC@LE_ zw$Z(RpXSu^ZbGl|H}fMaA6;C`oISw6Za-?<^{C+wdlcKoJ&I!(AH^5%%$c(<0G1Z9 zE(I(x_?2#W4@&kU$75#S(DS|$VYURVF-4EM&GN_(V=4namKt(c8II*$&fU8PFD%x5 zp&J$Dtohq2XN`>Y_lx4bfx1T7Hx{8>jv6kVi^sNqe<^IV%*Q#MfG0r3a)Mn~78Eo1 zZBvui`^-X;Cu>^NsD|3bv~nHi_j@6?_R#7s;i<`B=q}WP0}EVZ^?dGr9D0eHS*2Be zq0o!%^%jEFV*dh^tF$GJf`XwJH0k%0#G`VH3=S$TGVR^zyP*Ly>Y0J> z1DH*VbnxIReoZJrk%rl*`_Pdg?cVuMX|hvNdgcmnTX^nRecEn3Dk~a2_cQp-3}-cS zeXGaU|7tuG9EMrlhYDU@*Bp*Ys0z=1qF8hHK}F`}>OZD&(VGA$OrNm_l$Y?UWPTLgb8BIVH@c)olxrmElpD z?Xb1mQ#5d$qQ(sf;r_v^Y>;Xqin}J*?Kta43*}#KP^abmR$X1h8*Gftx-l(A^80RC zs_$3|-k}eMT`gotiDI1eGd;eaf{za)+K|axj*LJ`48tt)2`O9BEMKi*6}T5-lXiuf5$@95&vSL$-J#E);H-8}&gVnH<58^Ct7>$| zDvV?3rHwXcP_c@pEgMH=32LmyTgc?L5Q(VGT4w8Y@_pV}c~ z?~x6O1z1h>S1Mt}@~i1OcFs*fV&NDH09)?)$U3bOXp{B`uXN{ZFFq>#S+QGnjdtAx z-#Y%c?0Ybl;kb1y0=oXy>{2^u5Hno&d2W0zFG)2-$rboxSgB(jGlz)qhAF<#=rHSh5!`Eu zw8awYr5LxP;5b&!6&Su43shs20E@@`rMas822vkKVo}6GwBcN~3P6tKQ`P~kcAs)xL;y$U^W>wg z!gZhab>P{}d+n>~oKHJ5k{o$ysBFpOAhAve$LXCae}C+`MyHA|4!AO8v$v-|^sgeU zU{Oky&KeydEg_4%!(hbw02JUqovBnw34)r&^%LdHT$9E;)=0V zI9RL`)Plt>bl~bCd z6k6xocrWDy;h`7eB?{SHjJY#KUwHeTOC58#(o{1%)-00LkEU%G6w9vdJl!k#VCWc( z65yNfcoxA<{G3Z(8KoJqV)luD4f;w4*m_F`fXo2I56(p> zgqvd7N4!TecC2(ju+vO9k;JSbA8;HakuSXijZV@& zBk0L73CHUre=@BM!=Km~s(64MGqFG(icOdrT;vF3+5;qwod7`*Jp@a;1|w&-rr*HX25B`It!AsU@ho~yO58E} zPe94^J>{yMIiq%5#vM4vvnQy6D_o&>UV29ZJV4>nC+pjVLySld0f40i*b5m>4p&zJ5p$9T6VWv~ud7vB&Nv}fKn&BHUh^QrhfvDHiCu0qCgkifS-g1ZBPi#2zw7(m$-zaQu~XMFq3|8pJE)l1x%dA= zBOVHTIy4-Y213lJ z%r{U#-@}h3^tVqTd_*eTp%Dh}dGojZ%OSlchIH>P#cV)+L9OPB%KJBs(x$vj)3S@$ zm}GLCCwqo&4Bm1d!|KQOWWd!Q+4WY@-=DF9%t*7=o18v?QY*JDT1k9@%qmTON+{#< zIiu%W+RKYdRugIt)##eEO>u zkG#Tr@@|}Aw$K;rX<(3m<1xCzMp{9Q@f$STv64CkZ$7K`wI^i5ur$NBB)UcdTopFg z6=2r}xEO>lCK*Xllr`9176#R8#b>yB;!>A0<((i&we581QRqLpl|%0;M{9FuhEkL~78O>17tYF15i6Hp|^FYterTo^CvUQi!}o-90fgWL2vV8&r3 zLx}6I9ZZo=d)~Q{cwf-dcPhxONN><7!h=|sI(|25#_a$pL!;lF z_1^~&{~=mm1W}RICDM`?@Rx`Q*9Y_6JNh)BS+OyOf<*$*HM3X}Ac1lgFPxB)CGO3J ztr6^{l{dqUQ4clD)^dyGnrJX)6j?O9w04W1p;{a8vfKy6brd#r3#KK0WL)^KVGB+V zz+ZH()wtf4UbgBsdj|C<3WnO>V88h?59zn?Arn&M^=E@wFqa=jrnWI~f@M{_5@G!#223IFsp~2{9y(-5*C2)=zq9N zIKNApFZ)~6foFSD@$azqz$oZgrv2po|C%cQYf^Utn!dyRk7Xu-Y{Wf)=jGLSh@^7? zB!AG;%Ki>$C_S=F|FMAp+nGP6^KVPeB<~Kt4(HL}SSJs-R91WHZUJ|zDpP}l=H1@q1YGYydTJH+@3OJu5YP4q4URi+4)P+tvCkO zN}dThmZOmGVH-FkvmxIp#IZ6>v51I)srpW6egE|)-2L)mUJJ_Y!BYZa>-%-?rj z%f@SV535I4wBrxT=_O^&s+nk!Lp z3vYn?gOWXjW`e$KfOM2{`g z{9?F^rkyP4C+p@#Er6RUZ{QvX8rBUe4|(Gc5GtNB?qB%3vgk6*Ih0$hNy+SgnpEz> ziBg!HM5il>@vCq+*as^Ulo{QPNZJz*!Ik^m>m*bwiCQB?{%!t^lFgy z$JI~fSzxW}bC?|xuj{k?KT7!@|38XV*XL9VI}KmVhXQy%5%Au3g$~VW{c+p3(9A>6 zq0qW#63ouuDVvg)&;a(V<_BfdTZi1md=h8J=Z2?h8ES0tS|1iNh}Aq-Z5>sMO1p3? zuPB>VYQZ#?sEBpJHhp44A*C8euURJk%mN;egN+oDw5;p2>;ah>#4gsULC?gVv zZ(D<}A9A>!LHt^CEW2BrnV+dEe?#tm`iSyMh_ITg5A_`irwT!6i1OQ1=2npRfs~3H zUf?5Lx$mq@VMAqnhKjTct)*QeL_r`q3u{}x5qcewwau6nV8gY!c+mkJUZ^8vFnZgD znNhpju9r$5Ws_?m!zv{>=%xUTN|R>&@0Xf4u3_>zuNY`h{?=UwZ$Tgp7x;(th zs{--zL|o3YIXA1f%OxnPoxGpe@~6LeR7IKSfnGgD&5dXcxdyo#0{?o>$~?!I)cs|7B)?w`4=bOZ~y`p$0LWczny-`2k5Q8}62SOY3Q zK(4-zo)`YK^F2$hb+;kIc6?$h`!c4ehNk3pan8LRsp71>9avku6P0atl(fD3)J)Hbvha9-@UQ^K?SQn>eBW2mm)roO=5BPV z3=4^VA`zqK%h)FTv8|=YBH!0!%v?Z0+qIYP>4I(y%AuF8GZ2wYs5ju#gTE*EbOCn) zU6bS_)xHL^!G&I?H$_3HbdqII8Iuc%d7Qsh3bwv;?Kpy;7m`i*0}j}i+_^wGbh03xze%HoIcKanzxVk5m5iF?&^ zatZ&#q6{lc-oU=*NUk7w=dJS!P~X4=)b=Sr@1Ye%4jFosP3NT|h`Q?_upV@Gy5lC~ z=P&g!ECGr*2i!%1cti+XE4r|wxoOiy_bzGIWpqoEO%O#t{J{01q+z00;#%z1d1qwycnDkxvR*Szu z?M=~zh))!PPDa8(&i$B&__f-uiLB0> z_BXzP;3FW6w5i3DB@#M3`*4pl_frBWR}&m0xjQ<#b_H>jK7aBQVxsw$QdQh{^h@~L zD`;wnZO9~?6v0jd7RMlmIBw$}mNU*AKb74u?5)zOp~V0qL~3ZCr(DMrn@AA=52M=# zPe;*~y{gb5S5U=jUTgj774ND@)Wm2Wc!Y_OoXLC*Eh(I%9fZe~uO6iJN$TsE6|5G{&jMAv`BVd+)Vs&@gR3zAP1|!QcjIaLHR_rhJ#4Pf{0*(R z>GTWwlVl)!FDM`F_bl_~cq1OuoX)VuF5N&dZkiPUvB`s` z-;2jiv*t^|>#;t?2A>TdCbQt7RcqHFHJK%@7knTS(S-nO@(RGiKH&xK-*8PT-_8Na z>-At!z}Z?r?1R(WopY8-RSSH=5KAH;afZY@nayVrNStv10Npe7rba4Jo5Y8KiiDN( zLmm888nsE0^8*94`jPd?SrHuuuSC#O^Q0fwMVYrla=xeuPg3d^N#pD=715CtS5HKx zD&6zC1H}Y_L`*Mn*U+OyfXV3({^zB zaQcTb-4!2!IPI@Ucznp1WMvfP6nN}F!>PhJpD)n`^f^f0#K7uJH`GKtr@nSL_)PQ{ zb|+5JKt$7-}UED6WE)326WX!Mn}d)(j#@N#cl z5vo8Tu{9s`N()%>j$1QDf{h0?9(YepHGW{;;w`m~oS0gol?QdLI?-+hb)*S$s*k-y zst-l1lo*OSa9x&yF9$SeyAk6mMri_w9=2%-`Yy!E_xGC52<4-r5g_ z!%xcVd{cVeMI|Z;Me!8qMli=hcHDew6Qia7I2?mew6)C9#6e&XZ)j;7+eQU(lX(d= zQHbpEu4A26eNO6xwt<$LkkR54ai=C`+;t-^QvGs`b{CX zp!Z6&t(5gR&T^mrcjsw{ow-SCm&+zsG^TiGlT!N0d4`bEWtOUIrfNn|XbBzwRt7NH zd#xt71@TY3FF_4B5~j_fXXurCPGzzbAc?3k>m_>w`C%;OOlD4F=aE>L-R!G51*&mt z!w6X2XnkyUN%zWa7fIYAY$`D2TP~+lreo_Zj&|X}ZQ})Q*kZp{L119TKCliSnZD2* z@1-WiZ^oIpyn196AK53ji8crq3Y8aWA#LfZG@eV?8zPD7pwilS5u}vbeQ`<4%sW(M zn@LMoQ>uJ52+?wVRotG0cv0r;TOld@xbH%-k+*s&+wGrDPncW->v?W6d$d&1MUJZ0 zX+`jXb+qLVkT|Ojakki$SZ3jpY3SrA@sKU67hod%q2SSkf&eg)?0wb$7#2D_N_@WO z5q1{A8M$!|-OE^0i=wXXP)aHC6FKwnyFg+7{Gi_So_;gsnKoAR_|O(p*mk3@sB^)R zb+jYepwO%5NJ&+3>FT)OYQ2JLi!b~o?+Ddqy&+?0*Gi^Ag=ox~r6)lAttP8G_vL98 z!0$ft4^hD>4q3IlNNaPoqFuf`3>Ev*qdSOVU6y@2Z3x$%`U3i35)}Z zocOJHAZjmBJdf0pP9rO|S^H6qIxy?~##EpS3Gh?!@1G8C8Bx+HeU=z zM}m$6N54CzR;H_P>qgN z@>_l^c1K!@+p`9LOP!kozZkoxjG+`0$CWLyA0 z=_&R-UNx9m{Y*ZbkUP95C$|;zVk2y0k|aPb1SxceMV>i^#YXUrm=AkMh3}l@0kqGt zQ@jI4?3zk}NXf^^d@`^|o`bG=M~XgYYZTK=59(j2G~tdDRzl+2LTx5J&k?wnITD61 zBoFW`$;z#O>d|9W>;Mng2}zz_}bU9 zSac2#@>3-9#jg+fh^~l7lW@WzMiHGerYHmoTCV0ow(+AG#Ga_c$(Da1m1u0yR!0cA zve>ud3o-^p94tfBA@8v=-8yT_m)MVZjXOd<85G+tY9HWsb`??%EOV|9z7CWViv4KN zl)80B!hIv=FIQ}UUZ-eZ=xrnX{WdzKg$~F$npx)5j+w<5$?IaU0iC9>C0np+QBX*n z*~EV|kcE?T8Q;WUNtn`VYTLUCrdiLSCN}N>d^K@miL(2KcwYPcWA55>83gBB3M1angnPC~^>I+PXt{8Q z;k3xRn?89g0e2|T2t z*(4ezR%9263WGk6-e>%g6FWgxzuN$k6T7eUfYVzJq}qch&mm!~Es>)jz1rw)E(Es_ zeo7=a4e%{}e->kOmwphr_InF9`;%^@JLCi5Ez2LK#(!I-W|E|=Y?tmic0-&VWAwo( zI&_zvibNk#fyvX&)#cl~mLRh2a2%=!ZNlupz;3Ivs>9Ev>!p1|_aYmV*bT$1Z}A>$lR$B?w441tM#<0G1bD!#IJeHY{-sU3qF$Eh?;HjY%0X zuGSIOpOeqzw=c`NC0vF>nD2Sa_*BZVUyoqw=$t#xFAmN@pQZkk-Shl2&AZZgW=~2? zVHV9-T$w}~1e)GlnL2t?gcagx6QkVNi9m70*N_Pmn1cV+*hQvIS+iiQN3x!|c4IjU zL|?oM**zIF1s9`ACn{b{n^I=L$T0tFG{q(W8ma84ro69nj&{MdsG^XYhxq~Ugzn01^T#%24)rGG<6)v3C3`S?GS0B4r)DyosmPwI3t3*!e^>qhxb@F1~>i7^g}0hJ!B1R!08Zx`BEV@y^wfEOMx&z(pIcNpC~ z`L0Zd0;|*z>J=|%fSYwobJ|=KLlSgf;(;m-A;n9SGTF~J_&f-7`FqEPnc=}n|4(68 z0T$KPwa>uN-JLRsq;v|SfJjP=3?L0dH%PY^kdhKmLJ*Md5|D00knRR)P*Nr2KivC$ z&;36?@BcH;bN1oPIWK44Gkfo~)?V+z;<0FMSum#oZ9`ypYc)84PX&3PRvEz|9Lun1 z_S^&k?`hv2e!#>rUb&>y*;O#F&*GYeNzO(jo(Lh#pyXp2F8ttQ%vVvB^x%$Vr{}T& z4Fi>&6hJVk-2&+Xs--EJEe%P&Pj6!pA4tF+(Q;{2iI8MqY|X9Zfo*TpJ5OqRgn^F0}^^ z`SQ$rXPyvF*q(R~i%ll(ZpKkemjEI{Jfnh`PZ5iGn%or&EOPS1q5c!vND{MCzc2Np za>Wq1mIBP)h+ugaYlW}9S~0|zvkFK=^!nIuiWI~?L{VnOsJIu3U0${OeTqFR%m{ zz`RiCh-#L)n&{p=&GgJaCM1S&N!&j$k4+cEu+Fxv7vkI@5<%{LICg9f@-*aM@yKts zSt=TKApRN|51F|(gx$`y@tIXFvP=R~sACNuY~C&9N;6Jxr9z=s_XWC%m|6Vu z6@ZRYhYxrI_Z)r7^v+#QKY=lqY!4<5en1q4p{=m_IQWsoJQ{H7j=^kv)V_^@`Sp-< zMh8w&BqmcX+FGgv?|gxYNxRTjgK#69^Mkf#pWZ>%DEYLt`w_I?&LyHBobQ^u^<=pj zvrUM90W{IUTrNL?do?jD;E`%=wUBdK=xCHU#l9`E%K18?&XfOT=qJgQMC#aE%PU>R zDN1?mU6F0oZ?u7F2DVHiP_fK zE~+k)S(d*nNgf;?@~4(JEA)#scK5(_TJ#fnf<+7x749@3zCJu8x&50elnjq=F4P;{ z*9NCZM745{t2VDp8jbH=Qxra6Y)?jWNf|~@Pw5~^1Xtd!O)ZqO%}uAvQW(v%0;7E1 zGxb~ELVgh zdoKL-4qOWGg__V_wVw7W5a&J`0%JM|Kg4H|F-8tws52Uv@)RAzJeM!QboV9WJ!;K> zc7%H=?K_N^+%R?PxOx0hS!}X4#(R$5*e1D%A@9Tm`0YD?7=i^C>S@{#4?6m9Qhw$! zuJQMe;RG)SKL$3**?8}?Kl8AjR{P}l?pR}+j&XeqE!AeQ?{43dad^Y1!gBoA%Jzt% zZQ;s0D-88XeD`Ym{s=Xvjxphjbo(+)k*3}hM=!j`4~&i zm*}Lwa)(<9OT2^o0gC$gPdwHa7HTnUjNuEz#$UtLRF2!Q*ArzRERELk29dZaaB)N1 zhie}N0kCx6%jwv|YOv~>ZHykk#A*_HYiR7m#q|)qv~865j!42iWiXG8;WMQpTmm@S zTHH4zf*eReA27K`2l^98t`>VKfeG~l|seZ#sz zy!37}1#cupO+$a+sJj>9X@J4o<)B7--*lJ&`cgF+aSuUkYRO%t`Vx<+kPf5g3^8uq ze3Syb`{?jees{_6Onid;m~GCMphG|)oGk{!ZNC0Bpn|awNVey#FgkxAIz;2i)q!b_ z$fQg6*RbS?KX`wP`zf8yMbdhJFJ)@tRdWtnPlY3?RkqcKTT1i0s;ZSvhVTVZ9HB-F z9aWr?wnKmMGFKUW0h)t5NISoa-O8rJLu0%RSg*)%e_F|=Hj`J6nMV`*3M+>)<7qq# z|FQ$k+`I6dZp{p3^jV?OpP1X22v%!9UIM$*<}6Upto{v0CK*%2=jI6J%nmxCtzKObf>}PG7;;Dtz!fZ^)+sxFsmm z+OWt3%M_*tT{um{j+lDY(lSWh&q4b!dowTHK$(xj{eF|xwBN~xR>CqQlY3lKdxh5g z?h_>P>SB8sFOUHy%#61|i2pdQKby8qd+pF8%9zXLN54WfMZFaA#!Q6%>-ji)dES0A zbMO?>YWL(om@66ra*z$n2H%|ELSvJO6Lv2J<`{p`*A&! za$dh1bA6691dOuNTr%2~3ex$Z#cN{HPjx8ewYl{Qs$X zg8xbj6V!hCf!fayvLl-(-y90cY7KzN49G*DW{8uAp0PDY^oNrKmQ1@=>PtV*#ocsD zIxu({{ZozD>QpTfRL>0E54g!9^f+0mHNL*221;dlQ{vCxMz|g)qbr8D-r^6{(1-i)Kdq zPkSj3Xuom*V~ql5Qpnm5ZlJLK1z7mVv0&PzhbN{Dew$SP{$disVVE8BPyTA{5~}|Q zO-&mPIR20n>Htnbe^!k_%zG)9fdn3PeD2zkiB0}p*_giwEdBPJT6xk(;bYNGlWWZw za+Vif3HP0OJ|AQk?e8n`vgW$+e$4}i-R;R!rkyz1V%z+F{OATeK67<6yaeSFr{U}U zj)Ylp=wRz~qOz%%L;7-Agt@~{;)98iUpkZ_gV7CC1$O1xG63v264C^$qRcHXAyqn* zw@uVtek_lQSE776G<+o#c;O7*J$dJ^u|`J453d&iz;=X4^s^rxSQsg^@mNUzNNWX* z`}Y9>UfwC{-d;I**>g$tz(cYRCDOQ_o<6mrYj5-3u1(AzW5zeJe7g3)D(X&xewY@K zJyy=1$nkH>RyqxB9E;m6^AP%8kW!R)&Ioi15XUky6Ji`cd8ehkvvj`+oq+oiO`4CK zV2oUp8CD7{wl;#R9|C?|X<125c`;{HDAVEl9rrzXxH4-i+-ndnsq#(q@6pyV*cvP3 z1|0gr853O+@hZQN&NOt*RD5>##^R;3A%ZgEy)L*7U<}HhNdTOPzAQmWi{K1Sw zov++ZAW9(ZBaW45Ad~RgXFucl9<<}|bIdcyOJylXfG-nwrxRL+jzn4C8LNsgz0<29 z?~`Il5h5R;tzq}v9ig$??}8XMJkphy6g1BZ$F;JZ*p*CTpAh~OmduwqA7~yZ%?O{D ze<$q(L2X51te`&-c>R&$us&;FzyNNZIc43W2yM^`YnZc##0A;Fp6Lbaix*5s+kWOJ zjut4E#j`V0r;nv3R_4LAJUSKyLpwYBU`#t=GAuy6?5?Q3Zp}VAD*gQ}lKv%j4ZHAE z_X=q>b<;A?6K@ws5vOjBDd=hxIeh>HlMCON8^IhhP;<}4xftlUaJ~43wwrGiBf+g! z<2Bv26=WVbx{^b1ST2Sm#;rDOn-0BhXKIPSq^FJ*HcTg-G(0h$L3wty$ON5k6X(*` zMR{F{ttQUwQqGb*YG`2bfulw-Dkr_P-p1#Vu8_R0SAoflR5u}ET{r;}d}?Tfk%EK% zhG|fG%A20t8(sC_pVPNpsm7ObItwvK12w~9ylTRn%Hx}ogsDzxsIdpL?wcd(xE>x~ z>%uz{W6hn>06rsLIDQpZp0{bOptD%k>X!RN_$hntOtW{dY~P&i)Cooh4TDPU*Vt=k4g3$~D-pkdcID}^Js5fK&b6}3rg)=g9Eyw}J&lNmI$u8k8DeNMFB!wqM-o;c4(&oX(QIhRTAx>cp$6@h;;iu}#Zdk-fHq zIlK2U#lpUZ>$+{oAGY?=o<=T1H^*eW%3ODrVpN+7Ir5i+eJ-367bI~g)<<*~-tL5b z?-2>=Td2O8Dh}xxa9AA6-OshxeWb=|3N>2wvQS*d{v=eSa}U1GWl8x)P*xR{M)gMO zYgaeLOg7&Es}z*t(wNhl6$9$M8p@InC!$yU`uSGa5&>K6bE3TCxw__by+f95l zh@5*S6x&N;2zO11?3^VUTDKgMKIiQXvPN7JSkFr)9ezh1(@1`6wDEgmI zht;Y1YXB4g&)+`kwx>F7`Pe5OdD;}%NeqZ_jE7n8XE%6e_kGr{=Ch-xFgZers zsW0td6pA{oc#PHZe5%JO?gGQ5_ay9mw*O~d%LLVqX#ZZ1Oa_rr@3(0k;H&!W72A9ecHJ_*!GAS4)=!Gi2&uO=eU-A^^3!F`xpR9T{$8rI9ar1qvMkb;)189qUCZ$|M^T=&5d(il zwZ+ibbDN`!;~zi7=#5I%&O1zo!=gP7^k)OGel{=aJ;;eY4!GAm&!u7fEd`$08dZiZ zhg*C=5j4*(c9p^)h|xU>rNouPy)bdsx?JhLkv^~z6B~a-v_p)$wXBkuA5%?yYtv*N zwV{B`!YO~cr-?4|gWKBF-+SJ07XG&f=NKHA; z2DlfV82a>>t)>&htBBmTQ(ePbS>|`&t_kY$Hw;n-vjAnH(#QKM?s3Le zl&VqO4w3FQllWO~OFjc3->6XkYZ67R5e+h?73Z%b#<8s6oWF6P>lA_g?Uw?58ww z{xdyTSAHsU%FSBY2~6zIw-jr-`vS)t%QV8UA zG3BusJQxuK5-0cweB39vst=h*BXYuVCEODph5{1!u}`46H~iF}1-~p9v{>ijP3V1T zJLJj$#dw!{iT@Hk@GCrt9+g zmYMpMygYe?v)^9ffu&Yj3hP6bieoV^>Z(-YP3Kwkal84C+7`6}H87bP8sW!j(<>iE zieLjaidA|e#YsZfyFt1aRshB7s~>9S}_nX9^F$w z)ifmbZRLvOV`Q#zc$NO@2e!#Nk#$;RxBk06zMqi)9JDNLdim(l0icr*0O)=-g@fK8LOf#b|=a=$NS&km~<*#@w1o+cLr4ZqO{4XjDcEx_%=kkXWNQ7J0j4#?O8 zaL_A?_8(@9aWH{E;J^)$llJ z;d8Q~f~Sxj)tp7g5N)mC=yvIz&A=->z3heZxmR>wGZN&Zml*8}vz)H{-{tb3)!djz z{xp$nShibjIY_k7a+HvC_PZk4G=3tQXi!jwyt6XuR0(e*m1V^hdE#Ne%^DRS!pzT1 zEf69Rn<>s%!b<#e@$FGkv>eIK_69}2GXHT0&T_z<`R2s_;U8yhheS{HCG8sS)y3SN z%Z%mG)M_3=M|e{sVAJSVaR(;U8Bf=K`ajA9Q(o7}Z{;IS(Y0GF*_I$C4;SA@gDXtmmfjBn<*EIG*0b8MlX;c=9R2|U& zm_y|1KaR-h3!?V%_LyC=E=4ao{qO+EC z7NU-G69kU(o6E8TB{$xs!v~_+n!sFbWt?|`N^Fb_5e1E}G+gqY8HbR-q65xnG>fe- z6R2|?#`}xnSY7TECmfegc;_q^uxblO=v;aDi5-Y~CD(IaTn~9lc!Cwkt};NBW#VT^WMLi2k>wmU5Pp?gaw?t@^(#HLz!a z`40e)6Lh`zUv}F)BiSd{z3f+*7Q^TD3mgF8ECKnmcV1uo7fd+_{u>xo6Ia{c0hwX- zwaelHK#L#%&|jl~KYs!BsQng5-Ne-m^*f~DlPSG%V*q%Fjs~#&iSutHIo;nPX<6IZ zx|+G5P!7L?+ove}<^tY{4QSFb{s){+!*Af^%`H(NS8lGq!(ty-Xv@Quwws}^oZl%0{tWD z=Hp4NRUkdHO~5at>s|g9>HjAEqN+CNd=UV)KcoNhwNjyn{P!nRbm0F7s?1E!`Et7f z;FkTbK!F#(1rqoNpkFP1I`nR9+Yk&FG1pgc6vhz1E|1!vbMfr73{2QgR d?>8ua&yecM7?{^56M`>H&=bHK0Ke71{{T7aA}0U< diff --git a/PCB/production/jlcpcb/Snips_1_2.zip b/PCB/production/jlcpcb/Snips_1_2.zip index f7cf138f3c97e8318e854800f009467a81e313ae..1a02f31506aba134454bc35e637b5bdd3018517d 100644 GIT binary patch delta 314697 zcmZtt1yoeu_dbpjBMd4qgCHR_bVx}_*ARk~bP0lz0s_);De3M82WbS6k`^VUB?cHm z=|;NYcX_=(>%Z1_t^ZmucU+!(?>YPIz0cmy^RW1n^g|CRg@y_)gcJ)43yMV@Z(@?x zKrk$gjfFLgoyuK=O`aM@f9FoBD&-w0U=nAd{)3k^WcQ4$n}S5YvEWfYt^;Xz9V~#0 zH~(e2Z`P}Ux{L~?L$p|Eh?&=D*0JwUB5R(I@%&4ftw-1sY!5o+TONE6Wg+R6a8Jxa z8W=9dr;X)x>2Kay4dbl3_n72E2kPOdYN^raWLE#$YazGy8~to8VaONFuL@H{YyjKq zx#rg>-4{vB$_r5xUrXd%tpvE=XGW(Mcc$5H&Co)(Np?7My8;AY>D>c^*v z<3GxO9yNBZRifk-Epj+kS)VTnoj3?FpvGZ?QCsY9RFWSf9z3Ff0G!4EqM1n zwxOJmQUvPLOyU4GIY1|``LX9jsiio-o7i*kFQQ;6rgv@C6o{bJt8UtVG10W5Z9-dW zabTgBy0=?&wgYoK8A{z(?4ODn_}x36t+nE66Wm$BZqXi`;VeYf$vEVw@0Vz)l`_k_ z!j5S?FPjmjBih?sK0Mh(`?}g}Y%CX)FFw{R;CLc5kZ|}k8Q{8;$DnB8fn2Y;WgkWsJ#<;< z1!m}lZ@jIueN@v|KkiLyR|f_WEvNUUJBP#bsGDDn5v2zuHoxSkXC>Pdx=ST@GuCEL z`bxqFS5Ic63IUd7gx9t3ljX=c`_(pI<7>F)gl(_gtc)P?`UaVaWkcf6kO|eY ze(4+)9_{JIydwcoD)HX_?s+Y_r4LD;uQYq`zb^E6X$^e$`rhp?csN!9`}t8+u2JN@ zk2qNi!pWJJ#Fwm}@;uVOHssgn8tcz;NnMb~`xRzrTs6P~`) z`#ey@s{c(4R#cv@{X&F=_PYK`3EbIO2LIc2n+A2X@bDwA-UknobDq1G@MG!!wcT=*`%i+)-^TcOBcNi4>6AZ&uz9gUC0+aAzV7# z30_VWZTGlPU}wc)5mGCQrFjPrC+rtM15q& zkid$B{{|i&&KmOO6L)_+;?K6u6XAxNW5cuyk_ovd{PK8?m84&~dZxIi)~Ja*TErk; zPneypYR1(<@F~HUzGL2N%*M%XPjBGmz&TX#PWn@kJhS}wsA9?T&R$D4&V;qqAEYaR z8DX^=jvMKn@>h*a0W|X1yv_XaII!e4S^(nTAGE>n-yGoF+Ay-fxp$y#W3cW!qF-Q@ zZe~lK*QdpEQ({SRfXfvR|L2>EGr=3n;DejzFKA2~02*n)iEr zXB2b9wa@rS>9LlSZU{ZE_HUX&v!^hMhMnC28P&mV7UGq6a(jIAT`Y7HulX7b>*p`& z{@*k+TKypA{aq}q`$AY))Tw+$*rcg{DDT_@q75<5i$Wy6xs`t=Y)eT(odd9B{13iz z_N6*?*6V-eKlqfu<%Qxh%0Mmm5BgmNLY}=3vNp_|jtFFYPbYAG_bjSlMC#@$*4od@ zL-%cjbAyqiaP{`+PWRWx3-jpFWsX))pGi`wghY$hZ9UXy7y-^bk^; z1kzRykbwDlqP9h$Bwt9~OcLgXG`8tL=d#fN08GRkgqxf%E{&6_NDShaBchYz)E5OF zOg#mDMN}!14dr}QJcy0zTi68<0oBVYe6tRH<6ai}&0Xl_^USl;sMhz5e%xyFLa}61 zr&R?OZC^b_z zO|P`h5&0^C#y0sI&R_O5z6QH)og6VN#FZnXbv_0=DAPHiO_Rg@{jzbrN1yfOiKX(V zTSs_=NAt@Pr5Nr0nC2%3Fj@^1*A^mNJbgWFtbLlliBwE6=`Jm;EV=o)dy|*|SwkxW zzfVvzEy?nSUwt0eSB@N-8>nApIIo(!B1#qU3UQ06i$rl21v;6sdEXl(hB zcCwUb@|QP@(ENlxtqR5B^niZtSNwekWnNu6^XK&GtI^4)#y|RRI8sYf67&W|?k7QQ z@_7CQRY*mJrgY63T9@c_d}Mg}>Igkkq%HVlt-#^UjOhj`!F!Zi%Gmgct>w0w7yFkH z-x8f926+O)|u;nbNm_! z_vq7j-*H*sR4-Jsq)R2A^#L~}YV_&{>D#wtAN#)>vTj4a4mPb9I020Mwq$#GsDS9J z0-1-|4Dhi07M$1fW_Dx+*jCcdhKvGPQK>krvgrZO<}~_UEh4lND+xG&SC!uLS6vrp zre#WBr2oo&C@O@5u{@vT35VJEa+!8NORzfXjiEe&b3KVXJhn!Vg)2pUBKpg;unwn5;2_yMd>88B zMFRfnheFF)M~K?JHZXuAEC6nW8*kQ;owQ2fRNm12-Dxom+hyjd<@YC{W_b5`zYCeg z$oN|OKgACIQ{s9-6v8t3p~H-PvL4XXVL3oR!9Vs%6c(K-FAfT6 z792*x9kBbZUlkWmL?H|+6n4N7Kxy5r>Ty48>qo(_pOn4yF@nF$@tlNHmB9slOH@{1 z$f0FOv_NVqb^TD%dm|f052v)Whp8g2pC!vd!acldIaohDZZZ+%@aL= z=XGxqhh^es2f1VNF#p6M@7Z$n0xG%=ki!I?bN3oqfuTj2?qzv`wcpJ>IN90c(Rq&! z87SVzy&Maw80{m?(>nTkZ_S}43Ln?<~qZf-{O(Tdz_?xPixa|Oz( zD&Q;{$T?dRiO=C$_e{!pwcg;KYmlB%+2UX`?}1?1^)vom^}Jgun}1DQZk6Rp?uf`c zddJ@lDT71r)!b*AMWxX(0bX)ww#Et(yy-qM?JMfihWFWcUhnLSE&>8*19!x-a#}7P zm9nBPireQR&3MNa2@gNK=Xs|8zSxRp&1HQq4fq!qKNB}tEZZB0a(X0qlP zniId)5YfXecYyicuQ(Kb`1aXQ{^5OkZF+-Pcsp{1k~=C2|Sw_=Sp8_@zB-rn7V)S3D@|95CTx9oQy* zt`KvysvJ`cw+9~W!yjjP|0s%_LQnm8QC?yc;RbLTE_uS*Q6E^(V><_O>r-mn6m%Pq zpJ>c!%H%&?Rl2_~%o$wlyc(H(%h#4W#R!yC7$rOjSU{k@F?ICi)b0#bK0GesT`4ax zxGRs##F}m;Ga_hL@zL4?u1bFddu(`wq?=U*OpWIUK6?xrW>!;AQPbn0qEOyKQf-Z< zSwj`uCYXKgCWKvNTZ>(R(kHQ$KkNmysC`)qv;y zG)8C9pE;{Pi3aUsGrU*sIl(=5aPpf%@~hk3+=%L?mrK*lL$5!?>r z7!VQgU99l+zvDhuR5JW&FeXO`;&F*3z3ne#9WF*y7fJv-3HTFpf~q8nKj6$1N*D}H zPh!Jzp+wH9JR(m#J3LtEkA+#hytiLvDfYQlDGNyAKUcVi)HJz>9{*Z_vLAfI!%SB4e#_O?| zl!4{9K&9{Lhwg3YD#Y}duu2b-;h0^6!{rI`B8&6HdU~*Vu|H1TdHm=G8i2YQBYGU~ z)*4WtY?U7zN3|b4n%~jJ_|dG>AF7A!gk7}(WrqHiZ10IzCrMBxl-R+*Guv3Xv=?8x zalByrFIy^oK2lCKa_Vg#B>wY%-1jr^!|pxuK^zu>_YGYKcUIe=lojdjd5XP;Rxbu> z>$7OSzhgj`@--?ayd&DXTVwP1?Zy{kq1wnP#oyfeSP2X9H4Wij8F?A$($oW1Ej{Y& zeF(_i)^fiums0;%X_EXOcA#7TGzgl9g@sE3Ni=JDm^cHw4-j+rIc2-=nmPr3_h*dz z@qXyA`;;YKzL%E)6IeihtRwwQ5f3-~KAULB!RDxhmY|7_-I0h)bMHN8Deo376BC^) zK7NUt^KX8qbT_Fte?!}@52UWqQrE}b^Ect2q%o@#rUAa!*W8~aDE?fPeITaRKz+w*RogDZ5&O<(>^ z-)}$98o-lUZ9lc`X7=W6asK-6{N*gq^?H5VS=;sc%_(O7>X;b(KdDRb?i+cr&DbM{ zZXS%m^>wPA#3s*fTcyw3OL3ab}-b`KnF}*sc11?ABuXav=lgxP{ z&g*sZo9mOdv!O-cI_N?XxXuJl_l9oz9B1Emc)n9NKQa1-}=is1Ny(@LSt9;;E>E;NWPbM93^E3BmkmxSb6jBXWJ=H+tmP_-)T2+nLDQ< zHF&nS>vx)YbNq9$o9-I4=6c(?J8;}~^G|diIRCqgcm2w98~BP}}%1?Gs`TMeL z@hgy=+qQ9BIjESnWok0iR(f3d>!6b8LhtCTY^L9|_Ds*0^jPYAAwC-W zUmEB-@aeEkQ)j0C5$_$bE9R;9)v2qjjglcW<-)9WnG`VKY=&GfUrEv<1v%A&Dhc2N z*`vGxiP5Cg046=eiK+gA0$))pJp?wAWC!tKspDgy(qeBWrqCQHC7nY@g>`A)oiB>Y z>*^+AG&2g*RQQgMAg91K4b8HEoY%a)5Ll`Uk1IwX1%!fH?1PIf-@N;WjX)VpQTVEc z*>1cW>^)C{jRj94Aa5i2l%c2eD>#Thn`th=(zzkPj6<2kM|Hw*DvQh$BTS4`h;i-V z-#gCPd=^ckPQDpFH5vNNI_9p^Bx9$OuaIxWHqs!?+ag}}XPJ6@3>n%xd#gu-64eKz zumlSg#XD<)?h8S&d0j(i6f&3@pCpohGGW3BV`$C=iyM0QfRF+uJUY8X6hi@zrg@VE zE)W=?dedAX{Ipwob^B3Hj~wJO1R9?|NjpfhQLbJ0U~#AJ~S zf8px{m{nWWyn@)cEi>v_5mDSo-Qrv)_{ep}x?CHyi1OdHkOCQ0Mj`V7wa(|PGIat( zhNx(TW;DzkBe8#4SVtg3cW4nJeh@%1@~K=afalR@iuKLXxXVj9aAi3p2_Nf&fDqU? z6HSh}!-GJ-dkw14WAz?;*)U7pQDs3{CF9gRi|npi*r7}@esEr;oW$g6)_Oyp2+^z$ z!4*GV&G@|v^=>93ashD zj*J~CU8db}?`UL^{2^wP&H3QF0RfYUkjqy{LHQzf1OPhR(NW0|okCbwbaYgny(Bq> z4BhEBONj4wH=V*4^`Mof?!LBRbSmILrLmkI{U2erIiG!=r0}BdwG&OH)gc8}SF?*j zn;aem)nVYz>X}#5pucJ4E7>m+mRX5SqG+cXXFb;BJ)QyE#bTX8>d0pDM168vU}r-k za9gC*z%{47A*On}*?s#XQox|-cXe@^jsSD%$YF*YYN`Q+6e#JV-N>5Eqr+w`)Lv@zT`Apb* z+k8wNM2sjtohfU-Q| z*)u{IS|t<5mV+!-Z2c@0fiNN>mW9ujq~`{TBwZM`Lzhy(+*k{h7@Xeu!3H|g+cSex znszU#*wR5zF!jhrMZ5YdUv!Q-IBSSt_smKUm{099HK)`pGf55u`b5A@INCYU}nM5hJR>ZTl6H^|eb9!h)B%v_v$S$Tbu`ZtOh7IYFbKvA9XZXq{Op z7L`ZrGy4kSLjx@O!?s7$qtnM|6twwQeZ#@)`zJt8OR>H?1vo{y*;m2V#^6x<1MoSA zGGKrYqYc~-m6`aDO6Q^Op;k%-A6`YayfV__E1xy!)4g41iAIk! zfHpIRxtFVr?hUHp)>}_k1zHLj3t}30uLmML96@{XG3NEz-`@24d`z4ZJd#or50-O! zL7x?>Ry)}eMif)J_*_JZAgnX{=#+=?CEdWY?Si7e-~F4X~7_QngJV+8U$2WH??Fn9+-#1YPdSs5Nknk_k#T^Ee7E@zEsXl@ezl% zhIBbn{NX`$(Lr@>gLOLsc1PPeZ&;D`{Io6GCLRiT5{%+A)$=EUrfc7ie&{F~FKvVy zuTt#&?#*&!OBtWTj|vNkb!k&xH5%OYd~ihbO*tpBxpH{k0=}Q|G6ztsLEp;{Uh{vU z96u(N%i4$b4@3$uQX8dY>R;8;+lSl!wsKV)6q40QlY1c$9JV6rMkR|(#H@~(fd`IA>l_hSJg^dwiD%S71XmBP zg+|$AFtW|?KuM?*pb9KGed{0b~=OcWnk5gSTbN}}P{QtiF-T6r!axPi>sUH(f9-hrVY1tz*H)y|=h4Hu`Q2l4*UDwIdK-A=4_t4k~ zQ}G8^u3}YW(mNVkyfT&L)9YjT3LNwqF;tfp*-^u+ zQ5F~iFAi@PQph{TqvOR9A@>=8+D2p>YX;VRpfJfG@sWlaud)h=F3PH=MRH*xVl@@C z58l>EcC6wsQsEC-Zpr~aJd~jwt^|IJkbMDL=tv`f>KJQPH2kyU5TV-wu0mc+ioSQe zbPJL1FL0NuwB&9mzM_NotaLtkJ;%LUqC*!TNr-+0vDJw_A|$Y_m>TX9P#zY_#ef-6 zmKr=E3>Qy>AYEO>2uRl->qiJ!{s=zk4)UfC0yBn-g7fSFgc}qrD=2E6uF7S_sy^GV z>e!0`b{|=|f7c&1hVn(iiqR5L2EpGwrhk5uhDKqoY96^KNe>>`4<5nr?YhVWgQdA4 z7>a^fYfab?P|^;xj9t@*T~! zG_=t$kqfM9Kg;!ln6uhK11JdV_;4CvKHs5B#{UEv(=Zsr@uu0w?kzOup|If@j7L+w z>)~A25zT^^d{4_juGrF0M4WeKk$cZ*tt}WF^m8ct;O`XFzS7Y0RTLO8XEMZ|%Fuo} zuO1QEFUJlCMWI?pSCDRi4$O*A2S3cPKwP+&*b#XR_1=Q+6q~7c z_!Oj6CF)%EFQ)hyT_U_r8=P60rtvarahfcA<#6n(#SV!PFtI8LQ{y4>kt;8m>Q7xQ zMzZEP6E%IK@--piu>z7zW4N;BpK%BgRV;z_!5!20B-=jTmIumSUPHzlg??hLb59yL%MgE3_2x}I=O zD}-6EH0bW`=pBMxOhe?LXnrL@FAUMD4z>xg*`h-niQe{8(Jmob?f9GM!KM9fmCIn9eQwHd5$A%+Fbt=GSBlxJ%U*$=T-nWz zUxB_t#clJk0-#YnkW12KX3;JLwuxG!zwIU15N=V5^{z$1jTYrZ8E=ecCr&eFGs59x zZ?AOg{mP8m#y`(*OgOr3);As*5&GFZbAOErfzhaZ-RVJMpaFcG=l(E?M?sa80W%d~ z(H_vKB?q2dIRbq_p0&49~rNqUGg_jv|vtiy?jV0y)3tbc2R zzy5N9Iiv=bzbQJjjvHQES!$GgBM?HKY=arji?M1`y*_6;zz5mt0 z=0$ILqVXzY@zk^%J|^l;y)WMfl48e`>IAk=t-eeX^VMZ?p%?GQ^ z=)HuI1lU#hL4jCd31;JZl!4{}ldDaJ`!5+R-q2%J{N=>OMtQU-RRmyFz?+*KySqwX zo1^6~a6U>!{pfZul-WMGeFb9t1RosdFg1e=0HjIP4U{`LAf+BFB~OV+U}Wuj-3Lsj zol3@krr85^x~ZCd`UpHomtX!2*5aj)P$hmsf0w_riYx|O$H!!ogBn-!FDEtb2#4uk ziZHH|+TegSllj&A9kfxJf%FQ`zLZ)xuVDFXfj2$4Uok`wms0smGmI00;+5GZgCeVx z0n;zG{0m8~luqDkJ85TLf3D(CAi&Wq|H!82?S;V3QyTXY|Icvk}aeZ#B1{Gpt)QMHoOQm|$fe-263kSJODyT)b(G-2D&h~v|UB}H#M zp7QMiiGlBXGycQQptB@Nk~BfWP``kw#$h5z6^+bZmf^cM%?ek>BxKMfs%L5hcxA9K zhCcS+!_JV>wBskc3}F!(?gU}FAMPqjzx9kFfs8cC$Vd~>kd-q?lbME{r#!&AYf1_A zzy3#7k>hObx^-~JypQ}}b(GgHg9#@VIe#`?G@dB}CZE7R+|B_(d5Fu}E*t>qUH9}# z_DN`aV*|O*MDE~dio;Ks)LQyIUG5jlw*K4m8M5Af!y6}udqpelIh4cddeXdH#^z+{ z`Q}VqR{QZEtH1Yq1XD0AfmoV8gokBfc-kM;4($Z-oZp4d8<}H~itUE5@sXdL$zavY z=;7gfZ)(LS@Ta{WVUnBMBso+D?3`cslwm=@7xx#uX$!{*U~ARBrzz{t_MF%Fc*_Py zd#_>EiVJj?yH85OA^tzmZa65NSFI|b4Jfh+!sZD1v2e_ZQ%s0MzWsViT0ql-_=D1E z@_cq368@!vnV!QOpugRPn)9FajOnr~hB4D5)<^)q(k%{ zF2eCVI*)u_G)wsIOgu%m^t+a!&P29(+!7^ZYb(>EK(F{aXyDq?$K0IR?$0(HUWwYS z7!k^+!bRzCL+?T~;T5keRVsd%Sc1AB(76uCuu=Lyv&)+9hne50{qK@2spn3q(Yfjd zUa&s&8R7vboz|TvFr%GKZrqWk)*pN@?=M?kydC2Q>D?imN_fuDZ`NcuI^}_H!2z1^ z3tXAEiW*6dDe!4cUB$DM2QV^(RE40cTe4xyX1lUPV&F;ldCAwNF5Rkn4mLN>Ylnrn zyY=67;f6WF)q1!;1otheoA;~3$|hsn>$j!vU;`*#iM0)IqLcj(z;tD4|6N-9^hgAE zq*Ox%8pcIzpdx+fFy$$H{0FW11|6gszto2s;Q$?&lyau}wKOSbaSP~_5yL?cWSMLd z3}!^j5bwV>3)}9tlm}=s$*z)x%EWNZ73_5n$4SA0St+p7b^2YsCPo5S0wL>K{G7vGx zex8AS>oaMD&`05*c~zy1bNJ~a26C9ee6UG&n-3mPg89HTHDGOak}lH|wO(vbtk6l- z9H;~C3|{4JRGs2*djRAz+8wkrTZqiaZZ;Wk`iyXyLx-^Ax^z>@FFL`O)=kt*^c+6~ zH!4!b1{#mcGkx)J15xFaUonDD`!e1(nFLiktT0DZ;#he}ug+t&*PYHYLd^;Vdow6&)c z_X(j8&X%9Kr~l0pR-7iD=`b7_jT-NKefsW-XkF|t-YKqu3$1ZVSjcBp^U>z?hl)*Q zSE6LNdDh3?&%onl)|WCK%i7a@UY-f7*}JKdVTa$=HA#=jmx%sY(UAN^BCVCxPcF%a zo+DTqW66xCrt9^TDOLICUZ&b=hSJE>K}L4Fkeq{utDYs&|lhNG6UhzX8Y zTjI5MS0A=Llvk^O{g9S+K+#<^_?fw-ylR zkKHp0|7)6-+-~2T4-W(Z$cex-42T*b>Iq~_L&2Kq;!u1`gfPl%%Y%@SBL8CuEU*D) z3q_>4{P%VH;_zD~&~T5hcN=5jbwT7O#_h=?W*guFTNY*!|_j}q+419Vy8vH~R-X=aH1BhFgDg63;Sm~{-FOQ~#5=&=+b zqLkgj6Y+Xy?sGsIY@GT?bbkG3k1ys~uy}^gkc+6693gXQZ@wpueLhm)U~BvY_s1N5 zQgLB)-`tv=vbL6I?h9D~AvX|KFpheG%HT6U?vros8Z7xlx9Y=Y)rn!S=-sV2n3_1K zUY1_)f`(}Gedst+{EmM$z5K)HuB}P8O;TRrN)1b-T0R7`D6oT`)_2b6Wk7gj7aP!S zp9$dWQaIDuIGAx`&KU$h<8r=roL3Y>`^yqcy3x5C;ZJG=W*mwqnsL)T{73_0g*i3t zf=YS1@?dp4NqI1cp-xQZ=H$ptOFffzuq=uMJM8nFi~%AW%gV@v$sEtI&r{pK28_Eg z6Lla~Ca`OgxWUZ@hzlzdObfB(ZRX%IkKkL3yJR#GB_U0Te-HTLE1TzbeY0c=g<^vU z?->L97UAV;*)9Ee3vonj{;`uqj*d2Y$M`CPVEq>Cw!3C#I>&Mjh+DG*dpq#%nTkRQ zJ;C}6Ldt@gjHc0s3~?IV&c-`Ao8)_ZL=N;Y_P9yfvOP&Nq(I?5YK818NCuhkt;K&Plq;LXcoiy@Zl)I7mb6m0(97zE>WjX4*vnb!_z(- zWe@0lzzCZ5dHVN%0I=PE05FktoOBdOX9a{g+DEmxp8ZkEKuX*jk#%I4voVZkHTquX z#!Q1FYs`;&kd{3^4UE)wAO{#^w3@`Nv8m*aGlp|c%KSgngu;hAHjSOV>3mFLOXXDm z)iz%|uh7~lm3#k1RgK;(Lq5<=Cqb*v_43rzsFj1ILmI?QgXbJ{IgQLO?qR zSZrVH%+c-s^q#lw2a{4+^U0zNNYN?p?pBC`pjlZ%l>1i+(;Sj92quNtp^}fbMNsxT z+C41WHTyz>D)?|+QR6`J#Sakfs5|*c0^-$SL1JA*x1YC-IX>87b;y9N%9@slT1ZE` zBB1fWzDd0y)EVU7kQFYU&i%ZZY39&+$_6`Fw5<|RNX(LjT)GKs*U`BkU4GObSD&aS zff*-TcM3r;=j^;oY0m3#)yLkOdr3B1aaXdgAWkX-+2*_btZ62ON9^T>U zUBTmKMy1ztZJd#KTT3!mT0W-T)F*`zGNLG5lKH0S>-bO^4FmHaq6SyZjA;(91YzNd z|9WtmTdFQUs(6L=O>9986EdWg0@0vOvGN#?zO@IBEJju*h%CUduaYeHKilp1w0sPChT9fz{^z@Hf zlh;2u=!XJIJ|F_uP|Sx8cZqo8>iWP%Vc1bp;TCw%R2Z(~m7<5NaG$)9I+P{oH*sh~ ze1}F!ow%kE-_yitpb?1rKEpiO1?@KpB&GpgxikB*GJh#MuoNN8FxGQCv%OdHv_8ucnmFZzxCzxKw#7RsQ}zjh3a zBj|NcUY>Z7Ee5{17yGVB@FSxQ2?;Sj_76@(&$8O&2^p(skr;|_SJrd?c>Q@)B_$#Q z7%+Z(TvA2e_mfxq8OJXhkKyJR5-$F5J0my&ipmis}K4T9`3w}++E5H?7b_On9+BvqTL zmOQ23`?B>WTy9Bg(uwP&cMd8_1BpMyJK~DY6I(JGUfC{w2Z4rAcu#IQBi@qwu|;o& z$bGwtCWPpH5ij&HL;npMO>30u#D>ieoF`6Wak% zn&@~C_%&$#Dc&OyyQ2$w>oc9XUMw(&_sY**g@M$0#zCC>a}I$o@r&5qUI1;ipr#234zSx^NYC+q`f(fTbj0GkJ5)H=t-1j=bTwRjd zoPCS(jH-FE;)2J6pvjyHHXRIg7L=Y`2NB>S>RQ^nvbAtH&>Y&ei%5Czm>FGv_GM`N z8FjxE!Fl~~9sn_~!8d*Mgf9G|6=l^+K@js=?XN(FeblkNu~e*}Z|7M28U6f8tt3c! zooKOh|CXW)cp8RAKo+)jccq(W+Z{u!9rL@o18U7A*;07^1Ogijgb%!86_1g?L8QW=?ml>JC#>1)-iR+brrVEW(JmK zzUFP&I*#$;WZ14aI(NGf+3fOZdl%oZqQfTe16zB68yfJn=MucRCmKVvZ<@A-NUxn=C~)2;eu5Zot0*({f{j)QfU zt=L9?XS<|5Msl`WZFr1ZT{Q;vF6MWDwUjUvvRHD|XD&MWN!c;<+zuw+%t6<$(H`>INHQ=}4-%f=0s+1adrp_j z^>FK7K7xnlXfSTnRX?FY>hxI-d8~y5BZ~bzuutS>N~uyElpxsBs-*VcLibX5{NU4S zBjAUwnDc2g65|4%inhNl5XxYF9-rBF!#eecjm#M2M1jor|AF}bVfY=!(t)i+4RLOZ zHdXnBXkdw9x6Z#Su6aB-i$9qGylK2VVrlhPl$rPQ?c~|rGa5#d&wZ2=3^hxSkA?gh zXXixO!sBX~Q4KsIpB7P8>W|h@;+4Ng$l}IJA9$E%b>-k@= z9GPF>pu;oX|Ke6m;o1ATIdfd+_3ZPSgR;%BCJ=sB%i5Bw0kTxss;bAjsMN)Z3#s?yB^<|f^-^JM#T^)MdADh$WT`WFDzM*c=;;bEA_HUK#)|+zEs?616v7s~ zioH*j0MT;WR*r`t|1j18tZmv~FWF!7g2gJR_5ou*2?lmjcfd|6C6ti;hc} zE-~IF!$0^!bUN(;Nj4D?Z(8Dm~XBRnPHBC zU2G&_^&1luNlM-^f{aA1EJ(*E^x5SF{$%8Rj!4EWfoWNp=h zxBN^?SqO(6bMK}L4-3eC(FLfH={g5!_dy!fhri;Rn`GmpP-LYi(`@|7Ao-~Al(?bE zf9*Dl)m4I`-|ln2Tl-kve$S=776>jbTo;y<^^UT)`mfo}`Y3U5mVQFISIu-FO2b^b z?qzspQ0hq&Msj2{sx>lna{X@~BpLfD`@CN+pUpAefQ+$aOfRteSNK+P)-|o5mKb|W z+KN;H#6}Syb!>4sHoAAq4}ANN)w?Y;>&__NKz#qr@x7MR0HfFm6d$d7vk+}+F;j@i z$U(cTL1Lr-!yjB(-c?x%dWehIShjq{Ouu1Q{D}kqC>u7WqAUX~&4x{9Topo(ZEA`D zK)Xq{fWju6ss|uN_g|x69QGg808(^4+ryxQO#x)+B;CsINLEnF&;?(DP6`(Hu&vR> zuP5mg?UMvlvb+jG_Q7V{5IR_(2)P}Uq<{OCP@$Fm?%0X31i1RyE0_*8v&SKTe&G3oE335^Kt(YJ}s` z3Ni{S`5+Mja(BdFcUgiUhyGXJeXpZhh=%=>A*@Y>{c|N0%z>?qf@95Dr$Lg)8YC{# z?!EGphOW%G<(xjCTEsmoeC|n9p3=K8vK_tTiL>nq^wn&>BWM*klbog3z6U0@JP}2` z=|{<+B=5Z^Ii|F!7nBcyQZz9Wi41S0VAxUn$n?R?#J<`z$+)pzWwdQvaUl_|16a_O zQVu@DKfp$OQg5jwz*gNFZ9r(aV*hb)e&n2U9gs!lxVp`vS6H8HM!hA7-WGyG+b2ES z)PR0-MS?Chky%v-SzfmY&S?<9KoXMtFYv{{z&G0h>6pL_-`t5&wH5o|F^p;&s6UAM zSlHJ0%dMf82W-~eF7V0Y%$kqBhHrAxWM(zREL~bw@Xx#OZ}Xuw1N|_z75S$W@;D9e zXa>+Pnd0uDFTZ^Dl#Ye9e~;_m&a=UI>mf;b~Un=Q$LHv4Y{?Z!~w#?s{@aa%1V znwG%@O!eEQ8S}|_40@9+zmtdRe!~nZ6CPC$suu*8XO@2G@YHL*6;S>sDr4dIdA4b@ zhL=0(v*po`e?{JA8;r|rnVU(g(&K6s2XN~lb!+G8v5{D5hg2V+AzDe6zFvjM6`x?q zt#@2inIK>WkC3Ei8>FG*?%mSRIST(f!B~g}>p)MREb<<3ogQ#j;3cY9vA_?vRrt_2 zw`?ckvjt*Y&qG^PHWPeq=-VZ^{BHZib4^8kzFVASv74hBJQ)vPy|)5mYqOoNDc~#v zRt)G=sT0VkhSA7n%xeq0Zmsh9dZt!VADfK>S>&?S4IZ-`%s@dbie9c<@+zART4D07 z_M-stA^%JDwzmgL!7j63O!7EAxLwJvl;pjMgiqDb)PMY>WQ6K_cj|KH=%q=A$dPK^ zdo{Qy>$9tJI2$ZXwoL|G7Xka=XJszH3z(wOeD}jD444&1~m{^hLY;c`a{GptT~C5$ct{?4X?+;SU~ipNYzEuufhO}fQxOOC-f0=t?>`YY?d3`#>$j7 zi+pk)&_^)LLnG#xrAeEvZx>o0Nm6w;fJ1WkT!{(%r|lVgiVLri`dv6y1Rq>{!X+Ex zuhV)C&cTY=!z>AgrR&-01kmo@GI}wV`RntGdoNNMeg;ZMK@irL?CiCcLUgTOFyJAYIKs1 zwKqYf|8~3Jd@r?gFr4Y&xHG&DV}^cjIuI{7%6f`D93&F}V4;}wKVUKN)lg$2n+|p; zDBf!yc>2xdVtn72Nt0$atW615M^#JNS!ZGMf@E0Vm+??+&GHy$@S@|xk0ngSn-@VQ zSvLeS44M4ASh@{S=2(V1UsJIERg~SorN(??=tIpW!M_De`w(6any1y8m`joV?v)Uo z2YCPoU?!U8hDC}{hWYCtNZ`_aay5)tyCA0p^X7eRkEw08x9nL2?9ZEbDrEfGT2XYj zM4F{a>oTNx!7lWK8zeod-^~X>{AI}r^WK#acsmLEfrO{~B0k7)oVX70cztx2f_V>f z_$3coiHpuxm*amvamujpduV+S9_X3?5Mh_b<%{919c-GbU`vyp+l*St^<_;X{W;#t zPuq$Nc*;Y1_BZ=J7?(i<~M{8VF(Abv}RsF-8y%*|~ayx_2-43{o^ezHOZLCOPb2XbvI z_acacK^G!R6&(TjiBf&U#zF*^3F*#s)n+WC9J-K3L*9@02?QkR%w4suMR0W9+7e)E z{=M*lbbY*wj^P6&Yx9l!y5Bw>6&I#|i3=JTkG75mq$j z3ri(fwc!G-MPuZOb1E%>)hR2A?-O_!8Ltkv<6BQE@m6VH?3WBo??b}`-1NgEr*msF3lf(_vK4<|Cqvi~U(yt>u2AI_ggN*L)FIHd9p`Yz4 zexa+6Ss(TETjhSikg<9;xXA2z`43$cRjgq7{ubbj9f=0zt=2iv3P+VbaqT~#+?y&r zSIznGFdGO^4Yys%?fzTPpPDpO0Cu*U8S4Ff(Ihq7%?b~wZdKm&L#$h(pdkCum6r3= zng6yu9Kc8pAc%B9r7ua;t=f)a&r`Cm%I8bO429}T2Kgp%y%{GIi)eg3E>G33%R$CG z>nD5J7SF@2quhPAz-^ie%lt&EXNt=QAd1t6c#Ar2d#cZ*phy%^S0JfQsTsXxB`pC0 zx&wzqP(gR2IJkxd13>3kfy`|CXToBYEE)S+f^ZE&;H#q^@rO3z9Vr0~S>* z1z>seUZ%PX|Nmp_J)oM1x~^e5p-D$T=|w<6X(GK>rHKO41*HdsNE1SkBE2gef}ns@ zk={j-A|)W5P?X+6fKa6AcjNQCYrWt1|7)=b874QAnYrhlv(Mf;01Y(rV^xhuHGPev z`Xy&*RDA@P$&AtSp5Q;4_G8>55g7Inka4Z^`uNUju8PG?ecQ!9lsGn@@-NZymFzVQ zLS|Oi!~nbNd^UpqpsuPd&JMW>MXu737o~VQTywt1Plkr{(d`8ztnS>Kqu6tdsu5i{ z_Am&3HyAYLvVSBe=9?!r!j_(Gwt{v9T-Wx&8-vrUI?gBy1+93Vz<4*5c{BX31`_=` zzuR_=v|Mp+p!KUyxnFCyR<9}J4DPvA&-q&oX}4F{{nrfciJ2xrwpSHP+sEb8if~_= z%{+8VcN8?#EBh4?p~2Glo|YijX^}62R{dXE9Nv(VHwF_=+%W;N08hV2(9zm?#-U!1 zX;Ked?K8%rH;)5b7mGoW{LnBeL&ke@Y43H(LQI~9S4YpBXa^6VDQ!ew_QR|uztGb# zY00Cb$CFWI;5Y?5QE8|2T7(9`gv7HBG*S?tB;l@92jB}kfJXs+9sq}2%U|;>ze7&t zx}<@s09)Mf2r2Ua&2u+Fa*2Ms6Z9l_s;~8Qu@5?gdCNbOmbi7>N!y44zNSt5nWBpu4W&HCwW;BaM3Zq#7+@e$ro^Q;B z=NlVRbSf#923))b=^&mYDmA4ASycl%kqj6}-+7uar?t6$={Sv4&%_N36a3j$K!M9v zLv2}M?30h&wUIzSath=UEUN$@b9|Sd6Pl$4=OekOA73^K9IR^VsZPx~gCGuEK%Xtk zJ&1d4*6Q#iYDE57?zry{b1drel3!R=CFxQmJAUZko*B&_WWw zrDd5MXMUkIOs)zW%>Ibgs6RVmU5pKFGe8|Za}3OtZ`z^@#WZ32uZFZrIfS(OBNKQk z&|fnrtNI86jN_Bc%e0Kh(NbGaT}P`qZ!n-Gb)ty*HDEJ{utGMT`oY3hTGwo_Q}@St zOy}>oE(>X$I`Sw<2Dfo;r3Q-VI!b9Bz|ccOz+XWsI_2b`)pToK4auM;rQ{3Y0c9DW z-jy=%v3g?76ac1Gix{$kIkKz!*16KR8jKyFHgESJU-?LJH9P4MsnflI-**}y-RpBF{>|VjmrMfU)LaCLmZcLk4*1R07tKRS+#Z69Z^Q_= zbpWb9drepHAxMe+veZQA^WA`(UF+d7NTG^ z_BYd7v<~;>`#Fic#)AqZM{$@Drw&A5%fg|-T`cCt2-_~_PV;=GWz2DXg9v*l$XFXu zez6^WbGwEwRm$at{K7i=a@SFSJ+zMPM!5HU5;=2Y{phBB39~-gQZc;z;XT-o`M4!u zWPWKL^`0QVeG|)~o9a}QRz;xGzc#6eH1pYqG3~$Lqkkz>dEjvz0{AD0%{>nh%`%A5 zw+j#JZ)uGA$^LCuo{Y4RbWPDH>JSJ8@iWj>=z+|rE3H44Zfc)a16!072C=7Y?|Frs z3ge101{5B9ezG!1)Ci}AfyzM1PirD>H+9jIkXdH!ZzuD9f|R5qr8v+MtTXuV56DQW$x&b+1U_>PWsPVHNERV#VT4RddiRnk9>o%f zSb;r^G}SNhhUi@=?HGvE5wX&Q5)sDTnHM3ldqDMukT5Q%T7n>?oJR4EpgF4DS6;n8 zowqh9_{l+lo05p>;4Z+Eae%HB4tI{&4kwEb9D)zq1(EAy= z=nO(*gcZhGFO2A=$bO3sA;_;5TNmEb)n0umGShNGFt3>()4ZWdQnG6tN>EOj9Hqki z>98i$qHy_KMSg;Chh=QD@FKSBwrw%=9S3Et@@Y#4X$E~t=5-GTaAEqv8Lba_c#^a!_8L z>%$36x4!g?4^QnmyByG9v{Trh9h-lm)9#n0sUgXtk1aessT^+|F^G27+6&}D#r@~?mWiPxPk=Fa-lvl*=%&jlCy~8U1o!uu<@XPr~Qy*$Dn2F>!_lI{a4G* zE)t$pU~S^X=C7TQjyUEea`U^c^4wg-IO!EYaqHT+G-=ShUh{g2yDcLyGKt%O;fihu zR2w>2Nv5cWhk&FpD47-N0Gi&2*wilkiob%-?h4q5d(L8vwoSAO1iLTsjnuOi#%XYM zS=sTQ%B^1I1F!c$1)$Ep&@Ue;uy4XGgaM*B=+)OUW<(1~u5kYU(I0B)$8l&CK*hD# zqLreWKI4J^wuq7Hz4z-m^2g`B{lz>8e)YSFZo&7GPE>Tq zx@5V)hrYx0l>d~w`wHLY7V};;A}Px8N+HO9haLc-WNTJ`g2WL1gvCn$m8FJ0{#-%D zeOaTGLRbYfq#PYDd%pw=-=FCrM(EvmEo33bU)y=_{^Px%+fVdgoSs?7pAaqJWOJmA zo0p;5!#5B=EH`}b>qXhDrT7uxA@m=CFXs4B+Ma2kBXB8z{8`f4lJ?y&er;^ro9*-8 zBUu@IJXv7V13nVy7An&FUjyUfqHed<6}A0 z)vnf>N;4EXCbtQ883eXV2RGZ^wIo7h`RAsrV4NC8cML8_1p! zBni5OjXn&b;|c=#(fn!x{Ckub`{t%B7kPMyU^gKT+Y7WCP+SBg7KY1xM*t+dsxZ#( z?{B&9kP!vss{(c&{>rtS!qG++e1jqVU-o#GQv;G%2fHMfKiS@Hgw|LTkw9tFZJ*lu z0uvM~dHA|d)(ffb!!u2RG^+POv8g~#NELsU%|Z^47Z-1j%YZSz5W2b*0q#@d!S`%e zw=VH$ECKzBJsOdro#hlwLCDoLa~JYkZo*%!*09PtjsZwC`=bGr4leW|NQ8hU%R!Ml z+&O5DhXhJ>7?0Oi7UK1lc?<>cnaB0X_4xG2H?N<(-4OTw?g%S6Ztu~cEV6iO66iFE zvZgrIylc6gwbDyz7k%!Z-gXFsVlO*pI40Wwn5p!`b+x=iJ~5gU&#zhyNw#KHfPYlm zvl=?@lihI>YcRj^(KF=A56`nso8kaNr#~zN;qOH0^`YL5I_;?!CD#NBT=a*i*{r>q zQw{L4Vec#*cho0n`NV}!>XfmIs^a6z@Q*qNhulga1%zi|kHf9EM>XvM&c`PXgk*7D z0CBYgx&kmYZ#AgTJ>qY3%3##j8_eZZ1qGwnl0j2QW^ORB7K1VgLA@Qsv&ul$V{b3%(oJ_>lA$5~^5`0;GHb#UX-j+_S}rgDj84iKG~B<~mz1!U>>j(MzQSjKgu-(wo8!opR=+NcE4+LSA;QR^{Kgu^Q$dd58X6t>z z9!i2Mp8m!nP_of?5>HoKVOxm+BAJ85#Sl8gflpOCCwFH~Y*v*bN}NIF5Iq-!6dN=i z2pzRq1I_vTrq$KGyPvkWK+fA?`P-l)@hgfJV96-x%2b|bWD`q372o(1qzpSn^3%dV z`b^QeVg)K@skGM>Md4dWUPvW@q=8y0{>T#0l_A|AS2`ox3UAOP45H%kThdPlhA@{_B3E2 zxg7?t-~~aS`jT`q=v%r|gD${G&goBvF$;enF6?Gd1N;w1dLpGL2Res(Gj#Fby9TEFCeg#?dw#gfN1~hL6$aX2A7Gexu6m%zzb`+{c*=XB30Xa{p z>UkhXc!^*?&JL$}=h%jvhpiQMax4eoVgC!BIHOk=i{nsxP*~;kK45E3 zp{gh9^ylwZSku}e>xrPEg}wb%fLtu*ojfIhUVnOS{*)*FFM=0LW(IMKadh!mE+FYvmF$thm>jqIx8TwRz9~A) zCnAcdihqXrF36Qf;)Uov`w0lc_vzEzMJ_#phG+*1$9gsfDV*rmahTQH_PQR~YagO9 z%|6x4;1rAE3)5{VmC`L1l0nuqX~Y+wAz3oyK)vKvw}>+f1-|u-iY(KGJ7`El=O6GN z#?!l_NKt(0RztJ%FUt~TT`d}f5c}s!TPuAneA!zHFSjo~_XlbEVa`{N$3AEm@4g4mEC^tE(@%Ooh%+-E_n@gO42bTuFcjxnHU`Z-; za>|s?AjAygS8?X3^n-wj)gRp85{bXcK>LK}J3gPYP`wXG2po5DtmHiF#7L^RkSg^d zao()dXOFlMm6ET{^gT=p{Af&30fUeX$-u^w|IM@n&1;Z*f#$U=SV`19WaP~#<@~r-S!2BxskT?+^R;|-7jGLr0`-Fv+szcdZ!_Ua?HEe+YDfg0^RxgfEt9ZAm29yhn@1^ z1lp2vMZH=@Sj`5XY;K?Ev6o~wLo7M@<*5Xd>Lr85>M@wdD4T%t(%-s9vG49#lTiI7;w5YDbDR))V? zaY+tZ+@wAP=g$pTYIuF#Z>*JiPW2F#`{8&ipaDU66q}^FExGzyB~UBC3-FnwF|zxw z06!R7H@|g8_qywxZFyHog`p=RM^75*1uPm6W+w_329uniDV}!dW}_Z8ky{%)h}P06 z_XG`Sdk(znYmeoBY)qh3;(Af1+;GmeD^)zQYdh!lH-1MQ8Jcxy#`7G`TNm%R_S(Q~ zT!02{=~+G7{?!Wg?orLplg2f?%lGC1Au%pb8wR5U&Ms16(7*$?EKvbOz+Z1AHwWcn zmp&Kezgs$O+iTe(fcK!08ry1;ttWicaz8F=^@jJ*U{DGw7@7!zd1Pzk6|{qU*)O?Q z?r4)j+R|3D9M_g@zhzcDJ3bwe197lNF8n_-qif~@b**ryV_S-#&} z&cVb5#5TY1&f5qz{`mxcCpir+(7+aP($=t*1XQlm*MM&TvMVS~93Y54W@NvBn z&rh#K3KjvWw=<*@NLcAZn|{JSLsqSTPl%mIWOI#9cEjkzWbD-@%<&b#i??XQT;60Q znE&32O{e$QZGVuaHT z`|1D15z8@&$I)*&H?Qy@)*C8TFV#&Zjm?_fnXH17oJu(Z)Ozn_a7)d4gM80NFRrFw zbcfSO)#ITLgXXv3D6abj>?g10_}`c3((6SzayBI4?OY~yyx~qq_j%bbOxO6K_oCB) z#Yyj^+%@52Ii664@!n%Og(2ypXX81B3ER3~s30xGwv0b?}q&`5o? z)dY4i{GU8CpHst@QBA7h;`A0D9{yw`H@oSm=2&A)VY9ZsBz#hbY)d$)yKgO)FoJB?3E>QB2@DMj2>4)!?5}Gs`J$0?)(-O3s1X zi>=3e7rnuMCN6*QaJQPw#Fl3d@&oS$+{I0V(&aPA2#GD9Dmu^jRXi2oL9V0sihHW} zVoN!D?D**>^HqUr11LycJ-PZ3G6?lhU|7`dCyDF{uw_-8`IUFK0~tm~tId$Knb&vw zo$2va8NR9_KRC0P>nSciR;$vXS7GLJEBRyH;Q_3p;z|(Ru>mokf371EQ=lRJ2%+?g z48*CbnnP80)I`1bpZ@E9Bc89qx6JjuPy-#2QZ_r2pt0b1=z>=%pQXSU(@60~CIt^;7LV%hjA&nSXDO(2y>>3{(cZ^_eC6c*<1e&CmFy9)GMTEiE*wYR5^V7)o^K zp48K9SX{49oS#}C$Qy9hnXz?%bM*W~=aD;TCH55uB>)-|=-LE)2TL&ypE83C`@bnO z4ZD_iT#}vTbOQQS*Oq$^MjVqu>)-8_K#yom;Hm-g99Wd2J^nl}djGmMQ&WR^(T&Oe zJ;xZTo!l;5nSGI z(NeLc{Z##V&E@t|qNic7mIaGvz+hit_t1o2mXZ3WN4iqSl>p)j;Jg>C9apV(>)Mb6 zC|DY9OhlUtB&V(Fs40GAR~~v_eA(bWpsx>_BvZBkLa#U{4WL~)^xW{g0_?H)v`QxN z&CgClmv+Ro7MMsQQ<-7MggjNN=GUY19|Q8_pO1ThY(Bu{0GO5~d%^M(=iFT-Jk^R? zOAZH9-GqDv)onkk05PODMgZDZm}%Q<)%J5<6(pNw7IL;Gq3mm0$RFi$z%fTddLil; z9CS^6-SmMI%Jql_(7*^{2G*8zVgd{7+rZ;D~RD zOa?siCPBM;?mP?s%5dPx71iD5hVTF3DXYX>Am6I;!((s*Vg^7iFL6+hW-I^}Bkh>g zpovg(bzfL}+0JSZNO3{&zdj1?voS1!Or07x*t^ugL99}VHn96e=tnP%Wf&$3I%c>1w#6BEr@H} zLhzgC{p(|PLM{nv3q|&Nk_ExVD-+3QnRts2?JHjECcX={1yo^`VZ= z+Ip?NqgvBz!w3!R;OdtOUw8Z=;KW5Mfqg6nrkrj=PKA8$HV#|F!dLoeUUpSsA!w2& z+BGIeSK;*e5Ds&E`DMOidy};xUPh8D$qBk^6u&S_CmK za#o?DfCVFGDAOAKkkZ@TE_xXQiZ9lwW{qU z5W#C&i)CWxD#))<5JWVT=AFQ=eR{aCcIb|!O2b)+qt{5f+=7&uD`sr@Y7xY$^O&}e~(#PjnkQJvA;#pYkbS-c#2cHML1HL=52|*@5rqcco$cz{9~WC z%h@xrN>1yH+`d*DbYd_gA|%6M?Gki!%y#2AiZY5Iq#22K{Onr&6v14eUxf29hMU`B z9NFdKAMZSVY%-|LOE|orgjj>9h?8A8OOqvXJ{j={tS1d^g)O4|{d^u6y*~3_aEAKz zCej}KEL%CUo;b=_Q!Z=NNB$MDriDIz_sfc)=gXZ}Z)e}%Zu$xI-AfWDAM`isJrC(a zV(b^rcnHentZ)=Ynt2PdK`M#^v1pR0#mz(6>)w^uwzEk95ht@v3Gw-j8g`|;xleX0gblv`iehD6{sR8SD!cTDWXo82chqCf)%mjB+PsUvy(O=!ew=d`aT_#w;|#L9KDK?UE5 z?ZNwq(5w@ko%N;Fy4hK@GqMUJ! z)E}L90SlA=NC!WpwIlSD4^3j*m|lV5(R0qmyf3lr0IZnUCPQUc4vT| zQ;&VY%N|i5z1l?Uj@5;X_1|c-kX0XB3mFeS|9z5Vj|D90tp0iJ0-!m-T!?_xV|xB_ zAqhMeb0MSm(GXW}Sc5fTs1mF~C1?6F5Zg4G&(K-#7%-a@dqBUAaYqOSL zZj2}&1!Jwe`j+g&2AqNiHfj1A0uBOtfTv}%bH_?`$ceBaEHRd0Z0zKLxjnmpbG9jE z?cgLG`aZH4pG;`;*(=(08T3kw{%;CRP^^EzId?Y@4$E*AB0%dQ2iMfueX30{GO)HF zG7jPKQbeAMN>xSxw>G!~2^>DXCJ-#Lb`M25C@aIca8q+2mDdBNaPUc`uYo-$NelLfvPn?+k47D!TAl zg4O;V#Qm#lter<0jlq6gFGNo52OuLB9lDPU)7t~@YbWL`)C@4S#+WP!bLJOeh5act z-eO}X6hi+7ie(cS9i06!wO|T)cnpVc$x_<)qn5re+{+9#Gd|EQCp^6v)D-q-2F?o! zltcx*Sf=Ug_a=eOgiik<4YtW_qFwqbDV@LvM7rmD9l`_cot_5H_XJFZTEQ(^U`Sjz zpY=5p0#W2z=^VLB6VYy^;3fY_r`H=o#dq>(i;9a;xm5|wW5rvvWH#T#eA)b&yRFiV zsas=8Q6iU&ejFcNBCRUeU`#e1Ie3#rhtVEg6LXMa_8jrv9#Bni&d`SSm9wL0D@_#-oC!%|i6yp5G?D^95;`MAc0@A84uLa~6 zjR+>6i8_H-etObl0fuBVZw(DGt7gj;?j4B+9LUy~!RwZDg=yVjPG@MV$#T9qk86(*0*tB~CfR_k zyhd8h(SG{CHXw)JC+npgBY@!Hv6nqBE>>QA&| zCZxlEXq8%dtONn&WEe0YP||~hobM(#P7_b9X-{wW4O|-oHX;{*Dtf>%;LJ?;j0PD- zq7d`xN+GL1vm@ORC6SHhxQTQ@6$G5X$`$G;#Fyt4xrgEel$WEyaAGrf9|yK?DhHJ) z3o?6JvTq*W>_d5$W&gc16-im#7fa30g^j+F1mJ^H+>yzX+!eX^xha5`xC#t(B^S6_ zP;y^i z)tN=tQlB#Goz~i3;L#%o1PJ;*I_%=fb2Z&S61RHch%5J!ncS;Cga)z(NMk03dtEZ@ zkkWvwWKpz#9`y=7kwG`|Ty*5C{Gg)Sy(rh`+!?l)y;1Cdqu=yg9RFBgwrLz}dg4^^!v0Zh1w+|r zS_t4%0ZYsSrhEl1M$aR-Eq{Tq+%Gna@M^1~p0~RT`xcp`qj)I0?Gl?R0)77bE9CTZ z&;Q$Q*Le6b9+VgNA`buQ+EW7Y=`-HZ7z$jrfDQz7+ohYo(E`-f*&g^-DSc$W_~C^x z2!4@z7_9WAF2?HORq^eCMt#B|IXdllp1SAq5c-12zSDR1V_;=d?_V%K;C$NVgy@N4 z`H6M;Y;_jI;Ym}fBjNAlK~vG71PF0kn{~jKx3(hwn|piaKb_z?^7%iV;D6gB_tT26 zYF)LO@WjZPoO%QM&(qLe?w;*2>FAc_%9WT>pi*=`+=kK3X6(VW|so*+Mj?K+RzysKl{pY*?SOBvoWzxO|VD!~n1@Nqu9oINu$!D_M z8Jj(^4!}5-oIt~M(u_ZulQIBFZ%>dYfLnAt1*T%5 zz{eu{=JvZ-m+#dr1{*E2xA~nbO>E-Bto#wEnI|VOW?3hiO4#iHQR+%ins!(9&>LM_ zUF+p4l|9{rB67t^18fUO(bN=K4ob>4I@@DwfmD|_xPV9RXF#zi)wR6|h_EBi;e?m) zl2@qan||;=la)7LGKxVD2QW(Wq3x#P1zxv$M!(}7HwT>$X#Q-aL@MtDAgn?Is=b0? zzow%sxiyEk=_|>`91VG&sxTFU^ypha|3=OpJK5DE4P)X(=}WS=pA!TQNfGa{*P%^{ z*o-1>OfO19Lfp13Z2UwMO*uZ@q-;M`Y3;uMAkhC$fMDis6;e;0JEn@f5Kz6u9$l)8 zE#?5k{DSdd=43)+rfIz<#F~A7c_M^Bv%YvilE73Ta9)OZc>imjdq07{jD|eXdS|{0 zT_L~u8^4&=*c7WLP83X3OlSIJWO%D05LgS$4XA;b;+rs)yAd~?X4+E)z~&EHagcdB zeHb58+b=|4hdUqeKeh1Z9O7^)$^(D|Ipgl!b0wouz zccq5|(t-Nm*HAz@h@G-`(x?`GuIwuu`*44c;KO{^qm2hLtuP$ zze%}~3?wq?|E#7m=zAV%{u3W;iV^1T!v8SFc)HS+1KTah;j=V8x^G#-+&6W{m=%8%W4kp+KF-VuU@OTFNpdl&vtf@XjXw2FWSO)Yri`U_J zbqBA%UzxeIxOoJy*BZeKBw_|P69|nnh<;Y6?7Y+(7ER1NZC0mF`g~?6l5N@E7 zV7=vQ&PotbWrml(NZ^f^#v=)KJ&d*;pSZ{%_-13sY0hYVj)mKK_*&E{T*8u#uEXG6qCO5@|20o#*T1baV17?vVVTrzE8r7@MezAl4exV#82nG;g z102Q&dvB=C;NU=ycWi)XlN~dWvAgNNxBj^YKCXFL3)lp>gTj9Qxw@{|)=pGG^3=P@ zQ@(J65Fz0CDGl@)l7S$0WXpR2@kKn>f3IxS&ojI&S54#q$f;rkfClOd6M-i)xWOh7 ziZ8I&iBuj32{>I@d(qc$M_aY7M`P7u0rWho~GiTs$VmA<^)UN9&5 z;&H!tVR=Ht`FAjV%^=lDS3JukbUr~mHOz1%XtmrvX{1)cJDYhF@(cagq^)Z7^#b?e zzU*LzF(4wU(ee&MZw6So5d`ksATH?j&QcJfD^XLDpfu$HnbccQ;qOHlMrn}bH*UKO z{u{mw3?Bft`~=x31Xyel5o+juq$JcRaA{Jg^IfTFDX|#AOzNSFBz`k1sY19uP(cwc|us;~@86YpgnrpD@(J!-JA| z=1F*Ll^tg0!>g3l;Ck$WO!Cgz+)Rb*#HtdS3coGrCRC7>xV0PD>gucVp&3Pp!$Ujf z!cb~`Z(-hi74n@NIVjA8ooaPg~}@=1ZB+^yAu1!=fTk$lAI~(9o{zW!^+ySHZY41%9P12S=~#1 zE8G5P@Z@}I%}w*wYV92zl#JcLz=(aVpsdDTsR1fI&As3gDr z0Moh(uh8iR4a0}wQgre?9uCjs95{TIL;qxU_ zr+V^RmxZWyRVylqprqApmQ!uIIO1A;`Z(f)m%LNO>u#Dtmn!`crI2sy%v&YAuc^$g zHZZH&7GEEtW$IMYjOTq&_W8DEiC`!#)7zPrgTq!y_N=Wd(hYb1{8oyGrCZYtHN6-7 zCT>pueUxd9JSM|&e#I_Nq8j1#cwS#Mk5a8Eo?Z3X4IVT}^`Fcd=iQgwW8ghi?_A0^ zJRXM^VoAr!cdo!adjhI>-}UvgBh#goZn_0^vnyjSiO**kZ9iEzQN7{2I&euU)Mz^& z8fw(`>WoWMC#-%2ma-nE`%^BjE5M$aU$k#{%$-lPD}h(NX3f(_pc_%bTjVl9wRN<- z-XH?0BbT16X?l}!c3o{!xOzuO?Sh!yklTNZU1V<`=}FW zL#9!*Lm{s^%)@knvg;)`6L|@JxIGh;@rkoubqtA;QTP(~JW@n0i`^}X_lafv)?Q2! zt!qxtb+z`&y*yp|O%uczM6Eiko-20Mr=*R98yX|5h!zV}#+k9u` zE0T`93a>m~KaR%|%F-LHizJTMQqsbuQN;?8frqBI?u=bhsM{Lf$wQ-*;@erm5#Ux%d{Dd~)-k-IyI|Bm zm*3=H=F~|4{GGy?+x2+*7>+S_l&>5%|Fktl`m(KHfb!n`$qmUGt1+L1<*GtRLow7# z?Y1;luzOQ(l7%H;wko$NQAp3BD`?k!_mJtdU7(-=GcC3)fa(>m`WilCva`5R#TPZK za7=bz5`wNrC{mStzs)yM?BrCnkcTLu&B$=|Igm5MC9QRb`PDydGw|oxMEeFqf%xM;(qsOv-9AJJ=%2PEF?xbKi7Bjt$Z3R#a-@ zGsjA0(97bd^xq?b)s7Tp8Jc$Kzc;mib-k;(JgY6#pjrqSr~9Z+U;6MTv1X&7mhJT~ zbuvdEc*|u?Iw*|U`P{QLdC|UKSQWI3u5GMjJPki1m%bP7IG%S}nIOz%r5#0F93bNO28g==58Aof|G+OX0G75uZgN&N4Gv69!`o;*Lm*4M{j8)eq*?TWpnV&d&&-E}4dE4w1siwRY zcDjNpqN>%VOW3M!$qv-LGq1u2>9GWnB%$Fcl4afG^27cqVOIH?wfkN&mMMrNsBL%> zluo|#J@dXc-M&u*J1;n~U{=&ox|@XClLzHP#%*@%c&)0^r8#junpp1}!u{e@Al6n+ zieC;ws);p1URu$GJ1|x9MKunsng$E}V!gm%9!;;hj$c~ZC=ZhFO5lDF=ojUtYF>lg z5!7L*$4t!)e&l~pb=*^k_(85!ZZnC2@A#!|3dW{T>x-WGm$6HS8j0bf2y&-CtImCe)otZ}Hmj>#qq`duL8E8gvhU;sQTw~D)%~)-B2+Xt9$G#H~AIxpjPGuJ?YT9g> z@2(fG{xdz((yXUM7k88cv}k$gT6 zTH)X-f`BGy%Tt+4+E6pMJb7ZbP=mZ7VxM(3glKD1nu-mKS7#WVl`Ot*dw(ufTlXGp zZoFKVhH(q|ynQS3Nj7)U#+7pq5VM|aHof>Z_4rGc_la&O?`&~CeYo@ly8PvxjPa)n zsmOurYChx_f{<~JZ7$V&Fw}J<^Sy~%;)BzFZ$cfw4F%_htlj>7TD3gOKU_TIseQ=E ziddlP;am!#=;@>vG>iFIH2!eAwmBwu!nE2U+@UzPY)bq~^=Re8ZPs5?sx*uV#I^Ah zYe#{0Z@)wN%Dw8Rzn?4qXw8;5_+XHLKAV7DH9JZ^w!ipgDl7BW>)j1$(#jf)Z_Fah z{H&GA=!x@AwNs9e#ZGhydcmCD)v(EPau#u^=YsynomEUGB`W;RzMr$zhRlpdho$Ph zrOKK}Yadea!KaZwRRfvmvzCu&Qp2HJu~M)VGy0=WMK(YA8sU__LOSx$)~pLfR|{t* zwk*lEK;a}PNDJo7mbSHbU-A~6B%Bf3Ugwp1YsmZl{&oGx`$0JD?Sd3a-c!?jl#6__TuQ6A-iaPMPk&uaspP_^9m=Tm z8*;+#Rt1)5pG@VFOnRbv;s2~(FrHHj`iU+OGH}eDmzt_d5X7&f1D!yW7%W7%prWk&& z?EJj!cIXp#;jWjw<hujm>~zCBgc z+pu{2R2O6}>Py-+KixFV8P6Wj*NcK<+74qajLE2yk^jR8Q>FWXup6RKQ`%*>jBh26 z^kW?Jod9?@c1=zBj9zSNRhAqsaLl!U!b4TH*FIJ|L^iQ1gA{bo2{V%&p zvH2&+9W3QbBhmWCbUR zq2gjfU&JZv-zdQ8&T5s542xsJWFL1c_;ippi9+1+6+@qVB9Ow`U6(p^wGC9M!Pp{0 zp$QuLK2ATh_1o&PR?F*Qn<#}ucI}^Xp&5>O%{F=I(Z#Q#T~?!a4+Ap&!D1e0HPpl* zxqty*J*U;+@#%TugOm7fiXT)7`oKyOM;rzQJL&NiPZT6AUTGvPd_3BBPA&+N`0Ubo@##J&hJ7j_lF-0N5n=NBOGS6Uc z&Xm;O&eBds_xmf{g;iqOsg-OOE{BxM)nqqaN2rK)qyS1rNNXU6#~V$;?ataw)u=f( z>JqzKOp-r8i;xvLV>9$coxn5S&KBx>BlF+&6njIM=me;HMWQsw#=N6^$(F5qg~+DD zlIpVEw0-U>UV8Vw0Kuc&L5sE$rD$ic6Dn%*-K!;1-^0H1_gKtO{`X?KcA9qFD6}Y0krJD1pF~4G#dM}O_elC4UrWU( zkwU^ZKXyJl z3vDL(cA;Jrm3)V=cF7kbDJk%cw&L=*azw2%_4S^SG-&&Y%Lq?)H;N+8HmjS zWxoQ(>5ag1vM}e)D z%NL_En)h&uJuhwxgkpm%PLxs8JoPJMkY;avu+fLWlp@H< z&+35oQ@-Lj(pLM;m5$A=wP?C<5o8Np5(yVBTs}sm7f1u z;W$>5>|+H**=Wi~K@dpQQ#&GuKZIY~ilNp&nJ@Hj`4da5DN!dCAw$ZD*?XH6 zfiI9-h3(t(=m8IHdHiZWD+uvc4>ZA{u`7Qk;SxefNO`=D206UcaB&Pi4+I4gI52Tr z1lA24+86e1F2QZ$;_3$Fp{;Yhdz6NLl`ZRSUrm}TcbSg#zLD9F1-;{%T1G;I?I(qo zGR0g-#P!)%u!6t(@_9`|s_2j4@Ndc-5BbCVJh;M(KgK}x{m<0t>oJsu1ja=0@wHA2GN)e^%AUy z;)CLO#3o{p{W*d-ooz&9|4D-cQy*Ql4EVBiAzrC!PRN&f)j4{6K+fjf-ZIx_u2zCB z)kjE$+Qp?n>y$s1=$ZW3l)Jdl$whPV47NB_e~&nZ5WP`8@i&C5Y_+a+lx%_A9<9mu zbJ+c2!2P|;nslJNRk0%N{H4ce{&%ujZ3`h;xM_2<^+&n;lgAVQM-bX zyhQ=Gci}bst$lAH_1Bg+jzwoU=DyPVH&nxKzW&J(!@W>GO(fKL&oT*HxoSBYXj+vdQT0{kD8OciuLMP28%U}{BEB7itv~E_rKw$li82mk ze8z>4o=aVI+*iRj6vaFf3#o#8^h`aPpwqM&RB9uZ)}SAKCq8CJV+`)HmDnPaG zYT<(ZvA$KC2`FR$P!mKTTMY6SZ%a^qmm_#WpTyCPmAj395(Ek9Lkze-)1+-r670()&Xc4oOVunk4F4hUkEmyW2kUKu@OdMvfnb;=x zG9wnMru8|xEPaegF(5r-ENn{u4q}`Zs4H z#R?4B)Jov#I&Z|8A$f)lUx4i8L|{Z^qLebNFYw7sszzHS2MRul&~ zBD%sD>iB+4235>Q!J|apZQ^R)Kz9sPGs(gd$3oja>B7=Vm4m8e9}9Mysd_7j*20)C zil%h3VV=c|6a)nscXx!>Q;p=f`RPS)cGVa=dKkl@v1LXvA88j|)Bk5;sE&3JWklY6 zh27gf4w0+u-N9sJ{pRT7rz3~k-pD@he)Ho($5uGDj25Jw?IvBt0^<6AIQ_dGT4~-( zZI4{@Vm6~64YIuUt}&)8YPidDi-f-Z8~FX03+#f>?41OY-W=&6$*?5z5L6y#M38-L z`q8mR3yTdt;NolJRdG%V4iNv3uo)BlWr}Ca9Aa_d^k$ zTUixmVYHiPIz}#nZ?|q$Z#B{@23uZ>aw*k+Ti?iA2B~vmy#C2=b?VO#;XL_gXt$Qp zqQ>G%F!kMUjx!zK1Zbd_p*6@!6`Q^m^7oDXXe6)Tty&FeIG)pO=_pX54NmToO2^dS zWfxS(xi5dBz=!3HT+yA>a)`@k#O<{$>R=du-lMlsb!)X8SjH(q$O%Cu03Y9N$-fua zk*tKcEe2eR`3Uv0eGD$SY8UQY=JU9P6$3G=KKr1|cDFpyCjHy1p z;ypPM)aHVGfj27z62dV{c0T`xGfH#1`FdrV>S@4{+M~R}5O#nsCcJ* z{q%o5CH-*=3}s*r&ZPLD-xs1&m85%$h=%{Y&s9=zyjfsOR`QzW|Bg*`s!vxcKcx(= zD_Q`FKdRi1D)r)TEh0b-4hsx8B3hZ{|36f{by!s0_dYyyOGtMMC|x4mAX3sHDGeeZ z9fy`q1!)ikm6px{X(^GE8tLwyVP@Xr=lTBed#{VRI5TtRoY`ykT6?YgzW3hykHgO) zjCBTd(cB1vvSSYpM!e#$*9AuiKS!x*J%4aeT!#4op1<$3o53JjE!*@x0O6K&h|C2x zbL)xJU13MAMb@-Wv;mf>Pz*kNm%Tt;vE{kclnZ2ZSua>Of*=~Qt}TB5VB~*)p?GDj zuIoc}7Zxz%FXKAT`@}p(eVW((bP9Wlhkh{zR=!=?c=Zh(^kMi{gMB`EJJVJ{1E;dj zp?zmD`nlVYo3mnUjTYUx?)1O$f0<)qnSY@y&Sl)ICM0vQ{b_6bTtclQowRxq zlV^nLKU{CHxdB>Z_?a{*ttPe0x&T38npUza?KWK|26{nLvN-E^Z4epxSMh4vYZHZ5 z;k&T{*#B4YhSO3-ha}&wpEaQ0BcA?okafl`X`2G;m|CEWVbAYAS+x6p(OlMTVJ!$_ z(}O^+am87HpHC*4Cm7Ol20~?A{_}vmQZ8NW$`q|@tH z@m(l4a4$aJA~{&kxJgT>Vb44de!pUb<%dsp!CgS5U`1oO;YW{h*6G5=GJ(O$HpY6s z0rC3@lZ5N}AaO;tra+cBxgP9K0x}yNB_JkwFzwJWP?WmWA-+yL1&YE&QbXg!SurY1DL>g2xxg>esrSE`S;Ww|bPS2}NlI>>`9 znyih^f`p*l zF%S~!Z&*n#`NBU}F`|U?O61{gocqE1@yJ>&; zM<(;}a1p|@d<+Nv=?v0_>tH+MhU@jGB|_oGjsEw38iztGR%%7a6pkf^NI|TH#5)Z` zjew8VhV!ElvCu-@Cb3XycRQxdtP&}q0wEFZ^FAIgn$)_7kVeM(EJz>?c>3n;r8_O# z*%D+^iicK@Gt!8dX8|bLB<3jvuUlN1EIWUc56r%?NIZP~f`}j5ducYQ+W%&_^;`S{ zWBv9Ufo1q4MlCcqer)!q#5PzTK1cAwx6eV3q~kI|}YjzXJ@TFdil#Y|Js5egdef zZoT{o#f}M?LBOUeoVPG4faNt~7-nBL<%DfA>HM<44I!~=a7r2_Auf1t&lrEY4{N3utXRfkbZe!SYvFOQ3&0$@*$y7G*|t55S?7W>4BZSGZ5amAp(chqDx9@-E- z6ge*0oN6Z)nm7(NxNa=MoKE>ZDEB}ip>3~+9uZ>I0oM+pEY6b8qm!KU#@bjehj6aG zz?$AJzKLv;9i(AmJUoT8E!LQAI2jrZ>FTd%MZJAUP+Guy6 z3F!K}DIH)&%{hO{e{-EB^Fpo2L`nW%O$mC1plusxkCJt3UzdEkDdhPcS%zY;w zgFwCtm<89rxC)^407=eE*;jLoV*K$gP1iPus45GR?Ha-#xr^8UZWXKhqHLyjxiAQ` zr~_fTMMtpbs!(tYjwl;@>^vcXg842S92z&h{u#%b6Xp?G;B0YjJh+elV@|jNSStMN z@wIC()qt_V0R%R3|17>{QnVVIOu5$c{QVENIR#fAX#(H4EA-X*7lCBL+EqXtBllm8 z<{?Z&N!L~QJ`(rnx}8f~^{ikDbuQ&u7yX zWHmmc8qxbaU~wv|_j2Cvs`=NqU*MgpfUy7`7W|BCW@KHBQ=c+AfJJ4|5?48xQ7Tb> zrfeK_tD%HBcM7gAwBN3?;QGtbx+<5GpTPB~-KHhw(q-Z5@%W|)Gmx%p*LZ!y{PRT* zUNzj>gvjX{G;X8da3{6G!<~= zmvP}E{u0|~u>%MD52w?7$8QU<#@cjWfODGhMFwKrSW@4Dwi4C`ti|IkLFS~8yfm)G zxNm~g5XEC>kL1$@?c*Q|qAnF}rTDHw+gIKx>Zbt(%SdzgRCbAS(`2rMo6`$Ddd0iD zVxC28I(iy5u9Qma-v2Sxg zS>&T%&)7U7db}Lt2&!{H?jacD9>ISf`M{!Wo|#tHjsG(=`HBSyCX#T<#VW@z%m<2h z9+X@pM{4%`HG1cEJOMD*wrd#J@Qjy2-^?k(Dvr*xG0S#>t2~&d_c}gz>s@@lL47!s zJv>ho#?hF}O%%cz`nLaCTo1$jc4k5Z!B>U3v)qN=s@x{DA+@Stwp1hFIh*s=dq+pi z-`<{TZk%pvoX*o-F(eQIhRs;JSU?wy(9ceN4gXm78?Z)cjfd?mOOhIgQ-=D_9ao!T zeCHdehD@Ky`7a9m&!^|3F!e|yKNemS?~)-;kCOP;5_&2$>Lc{M@>Ytt&c!LLWxybI zfJ{3r2<3vj;J5KPq*Ia0<+skNEx`#;OxH^;aDd5VQ5Sit%cTb@Pr%Na*A|k*#klf$4W&+ z;j#f$L1b&L7RloPCb23^u_aC_3R3ogjoxA$yxu`17)L)IB8*hQ{ZDaJ2(TImInptj z7)uK;m{_8Ts8B@fY<+20Tt(~v`d?e z|K*LVym~aF)IbzY80Uxa>zhN7a>E3!k|ja-O3XYJB$({~xqf^0M4LR-(VjXG*)G`# z{q1DK10S0hUcZ$M*a>FDiM11k9ZE}Ic+$8Swnw~>NpS@!6n9q3s2;t_1vb#ui(It{ z5xiY>5=qS>;Wd>B_AZ^ zh2^nn6Z&QJBT7EtNL79Vc!ekhW)x1joGxZik2>8yGJ#2jR(^|jdAD8&lke5~)b`>n zW*U1XC2zQK|9eBwXleSGFJH62tO9wTpFS8u)xW+O6&?#n*@KLLosLwgKV2FoIPJoL zQiUK2{YI^7>oukg*kh~J@(IS@V+Pe$ADRC92BGgTl~kv0<>OfG?;JjBv{ap_)N~wf5%i7enHXsFr1g#>>-5D zCW!)46=_xknfKly#fY`@qYTRK)_a7of4_Y{{~^vx53?CRjLOZ#1p$bvW_~Y$f0Tv=B)P>D^S(lTskG;4i=|t=v_|YBlW&KY<%a?H8 zd!mvrR*6J#KkXO|n)QcQ?&;Dl4bXrriFnxDKzPSuGxZxSR$>u9N*-^Pio&zkH_A^R zI9s4+mjqEsSskS$ye3gg`$)Mz(g10f z8X#qE#j)($YaOLHQ1mVPmHJ94T=^g8r={lgc-Q8@ly_bm$TnX%(t9^Bx^z=s)6`CZL^B`&sw);Lh1o>atBLM={pPmsF z>v{&mn+)0g7!|eUk3!n}e9uDPW)$@nf&#{t@hk+j^pClOr2Tv+*qtt@5TG~Vw?~7? zgf~o^bJa~17{b$ofi+B}5tyFT8S{ebfX1ifSK=36Sxa@NCMD-6=v89}CNLvC5?&^$ zTqx=s=Y4)taPX0Efn%sb^VJrahrvtdd~neT5QyH7*@E(dU}t@^eFyK4T#&f{;g?S1 zz7U}bEk+tjHfv=Nm%rHcw)(75h7U^W>~iVi0T9L~PEMQz*(p=3#;0UW{Nw!~#H&z6 z0pb?^vB8Pj6yrr-^rP+Z*38LLCU>w@AJcrSnG*5)T}eq>3JM>_8pQ@c_2W99Y7$7H ziFV#!2Z8ic4jWn!y9ZZ?{HGNd|JN#CL-H$M5ZTl#%5o@LYhgXQ;PKO2R|m=-XMu%o zPLEI)NSahXSFr{wyw2l~h=fILtal z!H&`0rz_LG=+(rF9n)m|>ju!!H_~A>U*{UyaIIk*^~H|R2Qi$=qO#`7Xblmu`fb-8 z7R_g(9Gn}GoXYE+>vMoI_#4yGaM~{Z2rUIwTHkMvS-IG(2Wj6&!^PePv1$(B50|3{ zZtuShGcsNzb>4JC#FPywr;V@ZMg&w9C8D8<+A&fc1*?@CFK4=;4%tU zgXta9-M;tcn1A6b(YK5r?JLGjh8lBDgXYnKf-=a7pOLf-Ty*qvi*;T9o{kY`-WQ*_)UEWKNi{3sHkL2Pmpg${Bg_8hBT^>W>z09zX>U&~PK_R2q_Y2CP98Y> z-rtu=@#cx}J=D|SuuKoHdlp%j3glfnNuWXm4@}E%o~)v_YZ{$gEU5h{l-Jkj@0!f_ zFR<6O(@M<7ZK>$!B@^KXG9EKaC-il;b;u}CdsG><*bO|K=V0`=*>>@|^9{s~Y zEkEPSfqAcG*8e(Wf4!cjDb}R|=pJAuc@Xuln5eNI=T!}t)z~CDMr~?$U|BUF7_)n9>`j5kMi_-_e{E_dvY%Ak4mS!0xW>v=;cDYin zN=aa4BCuA%jBiKZ+;tz6eE#R4|9uqHxg59+wax_9jKax1E2P}5)AMzyO4ZUzPW`KU zBvhY)5u);+QmPl!1vP@+QfdbBXr{n@d-Z?9AkeBrD!VjCv0>0ppZ?d5BZ(^qDoa;}sdb%yJ z_(zWD_ih(f=1b?4@4rDOM`}f^PCA3}WZ2qMorOn4EOcM&#Mzu;cBw}O$^c3d6Hm*) zpK72HB&V-OpKiKw{7;8xkLRtEh7K9OjZ6JcAP=g`JYS6?^K(-V98$$M5RIV|C4i$R z5H0R>(KwYqITxuHoU#Pi1%LSEtFS&?s6^rgodx$IUErfh**AAyNT){nq~;Mpm(Md) z3&WxpqH=S%s-{&*Zb4LU5JBbKTosdlzt8(s{m$iKodJ7l@S{*&{r$IDt$z-XbB!!Z zj2c1Wp)>>64;0rmUbymEZWm5=Y(Lv@3N8rz0qVl0H4 zftVTWmAevv|GkVfkKiJK(J60G_i(Vh708#$zOj!)ZN6qFxxY6R`lp682g%)0ndC0xKC#gHICgj@^b0kxXE5q9$2@eXsUeDZ0I#~@_k&&k zV)bME>Yv&+#nXxNxuv}!829-RnbE0n3<%VYRX!^B>WS*hXL=T z{=Q=a2UfKlaBSAV3jK!v2N#T9w-7r+^7Bi-&h37E0gzn#PoHsX|2?9jXcM`D^Xbh% z#7OjJ8{FfTF}kpRFb0%g!}Ov{?Q`aRzqjIxCCn>?nE8wZPArZ~)sgjymB+jW=1!h$ zaVn-It?Uw6_><|9+%MUc0+v5Hk~JOf`OInkaRd?H<#Eltvj}hu2jfhOuAM>1QBHpTQN zk{@#OO^e}`AvPe71ipLe^5>gJJ_V>CoLZVRcsWjBmm91Cm-w^O9AMDPY0sHeaj~dE zUdlqAYw8b@P$0$gLoWOY820~1TkqEWGyrFb^fUz(B%V6yekPsb(?xviYkWAy2~Jii zlX9YJKLXl>!K>GMlr4|99Mg9$LEIoNCD7}eJ zEe;K(-zf*02>w2_dF?(d3^|8J9GC94CIP8lh?V{E7l^E);86vNj8IsVK{ZTae1jy5 zy0{0pyA*_?&nKX$v+N?68uM{fkwyJ+zdY92r_W=@OyxrrQd3W-nvm_|RAN=aY-9Q+ zxv3xs4@w%LSIWs89-kE#8Ktg@$&Jr_Ka%FF&mqsre^(*~-ISv5P}$^8h}tWlnolnO zScn6XaIT%L%NE906-HPyxu7)pL;UJ@gB`%^Ec;g`v~eD09i+fRO_=0%qWhU@s3P%! zkYrQGu@ZOaXZkpPyqFu_mVtvW4VZy5jg}wLXH!LCq3Zeji5G8Pq2ldey@?u1-Z*Q3 zhxT0!L3>w>E&@T_c2#&^L{kG87gD&fw#aOve}X#MKStlZMW63O?{3GM^SkJ4JGuVW z^Rq~&V{?Ai*s7`0yb-763WHBshaq>jfxyh8o1bcd>iM^?oig$Z@rz2~o~+lhaSzlR zOOoSi!;?`o3<-&?n_Vmy)fXG1EBqN9e=>eQ_X&HMBmheTgzDJP9C&~;V~-1F=47EK z*$w&^eg#n6x?KugeX@h4e)WZXd<@4w~SwrdhI{x3Ve+|T0N8Rn~qVKjP34Ma5J4Zcr>ELC(vo7~JA=^hip`{nf zuNm2L`uk~Oj>_eefn1MLw*^<)M_Lq|Y*Ih+=g#9UGw*h z4vW3dcX3TjZ+~CT+dyZ=Fidi@+qV#&cm4-cDgDC72+Qc2WS_cH%!;Tg`HpZk3=MeH?!Ou2L zUp&w>iTf5pj?kKyiMNb~E_6m56qp9Fc7!?k-ivWrnb-;qEBP9Wz4N4Qg*gCifvc30$ zh0Z_3XNLluebMmy+4rt-&M#)x51dgS78w2>2>_1d4xbBeB&q9#U-q+{rJmvdYp_TP z__-hy!3Ah#BI^kl$j^@Uo$0jfA~-n%sDIr3Ghpm66e<}yE17Nm^;CO;3jH!2e)smy z;!P_HcNkPL$W70S&FjX-tM3(MmBPa_*S*GRMwoAPOYsS6nW4I0_kzjH?e}|{+*>!G zRJI=S2%I!y{wI>f^$O-)06W04RkR8cQ~cNOD5fjHg^F4Edk+FV{T97b|8{x9&X?6V z+2}Z`$gjbO1CTsJAYiHenH>|F8AXI!cLFDP8EFUnk8oS9E$*Y;Y-X&(Q0>-_dZF>J z?-}%jxW{O)Q*ei@&dt6QrwVbx20-3v-FTC^s-}fAkCqeLwsR3ZP0>&L(3ILN5UsY!Uaca ztui|ZZ{+2hQOBmaf($_O!?(VK>ftsJ#Z3_*H*)HYU3I(9(3bKmiabadl|ov&oYvSaLv?)t)TqAYUi44PV`oGQjk{FR z%WD;2Nlqt?{jorRPIegf0uyr8FGg^@d0Za3D`*d?c)Q%x^q9kWrf@(fBW=2N$Sn1O zL1Xd9>o1S~?wyQ?O^7j4R+`1&lSqr#;AV^Sese^gLebg45e*8^)55~0gg_wp5XSTu zFKoBeHwy?M5G>JbTNW&uOo2K=puo(`XYnyb*hJ0WSso)%=ASW{tY_cd5}O7^yPkf( zzpcq-@kXt^>D|Z8;g-xN4LAyXpL98q!T}V&G?%t z#)6sx7s4zI9pHnm-%ZOTQ%U#FED|Q!o^0S9k3Y%MG-@L5x3eh2PIph5`~VDDDG_*ke)$F3{`JJWl*J86A&4_`>vvT1PXNfFbGb!q4 zX$QQ)mFTkuJ~aFR*<*0NOy*dbdG%}~Rn4w%Bm6la7o}QWv3+*oft;t!8<&_E`5t7} zfqKxn9CBFI{zpde+ssvP5MUJc)&JTg@Z<=&d$6`s=ul+lchdC&Fg7N2c%R?pe&6rI z=V8^>FC;e^cg>X&!&?rG%UL60Qb7UQg%XY5JkHJ+gBrE1titr+<`eHnHdcdwKask< zb@UGLJ>%84LUEbRzW&`RCM-~u+}hFAQ8^X>co{Uz+HjriY`qK$mIP!q1;(A4b1xbz zn>>wjIvz1sjJch41TD{ErU;bhHD7w07xnf?zY{|X&RQ3aY%IDWoSuuDdMvD$eZyL7 zG!y=zIWl=r`%MyF_Jxyf@?~EJxvrX-2*oguu9`@zuKWXQH;=sX=+@^cStBne)Az(D zU{Lqj;W<|$=}Nyh-va<`W(i;podqLZsiQ1^#FYL@u5l|h;x(`Wyuv;QKi48W6IFy>`wV&1qQJVrr!PRIYWKYq8E(;BK)!9)6g#}P@A2`>ZG=|rrjKhQof z``Mx^lEAa@Vpqh?=l|M($*bJrG;TY902WU)?X`%~lRoPGB<8n^dOphYG2KRp`%2^0 zr#{Wj1#PoW3&dZuqJF06_eD8P=lqQJ{8pCapU$XO%40}}`}ywInJr}uUvKd{7IQi9 zA`Z0g&Xh;q>T~8bY4mq+*XiAhy4cuSTI1BByVf)&AF_Qp=Wi_`yUrPQo$%qrH zm2q?!EecI$Px;Y&R~#0scf_C?VEut~Xtki#lQR9aEz7hgY1>gUd)u~71H~HW_1R%& z68r21v9Of=eQX)3d`l{LYcVrU0l1X%ey?WGErWD`e`+g5gj}ky32!2yNWuQqv-Agg_X^_jO92ec2vf*<*s>an&eN`zETbB$3H})9ae!HnM^1f{J zC2?CVRtu-Cf(;$6cUBAruQM4LZFD;p8SOVF1t}t|M}xMk%7L_GVjVu|POAk(IdA<7 z?UxQaSUui7PpTyx$QPOe#GYy}=eaP=+7Ng5L*HU_I(!5cywbPp0WgJBckAD&Hi4`MKc zVe?xG^2`A5_5F6%Z!T*;KQ4%IzQ|(=|AnvDtP&NTr2d8&BD2Z#7uY2eVgH6DqtEm= zVF9p48pFyYzd7156iIo=AClNYG^am&3#}HQwyQ3%r090Uh>scJmZ6mL&{903R^752 z_A!O>v&P@QJ+V4j9Q+~S(w6KRjM<~O^%(!H4-N+wnF)PuEZl#4`3}COa$PSYx;TCQ zvEZ>iBpHJfpVE-`C*U5ikr7`1nGJGO3=7xhRxweUf_kmB4vf=4A|jFD2Mf>3_-bYE zFQ@o6wkn%WpI1KUI=#!^;U2k3bm-<-GQ9`k$+;HYy@8u28#Cq&ReQ#dj^X2dP4;{5 z{nTED2{Yiz@oI2CG0-b!^+Q6s#YseBEa_idA9CN$WUEtv4{8h zD_j+9!`yr6t?MziQ5i=CRqmc$r94U9QI}eS$77WxWwcp2Ia#7Yk-{nt_`I}dYF0Yr z{!Ln!FLyX_4Cw25O5-@#V>fL3OnDum(@Q=KJ*LQX^y4nQ+Scbx~h~^u9QBSom`V^i)IM6UB7rf z%(9o{ZvBY-87I;7EyTL)%kH`Zarh&gb-t9eYMM(2(so%RP1gv_X%<({{l|E3jn9!! zmJ+|&D_S69e9 zVvVk?-RLHYI5J5Se+Wll?aPzzyyY!-j*?`ItDP@3?|y&5F+&ngQj%mKH0KXVl$DLP z;<-$W>x9P@*CDU0bs6d}2<)Z*cKg#WQefIxmtT2Z1(pSCmyH++2$Q*U;6b8R{$6ab zwkuz){AC0%N&Lp&BcE`&#&-^qhKz=F%8@=R#xfo?;0|=e8CJy>dnnpBp;p{%;(NAUF-Oerw=wUMB~!O;onF zxZ;)7J}>-DM+8BPf6Z|kBllG=xPLO0g{3kgeNDP!Ix*}QOLH`Fh+_hs`^dWYv`eK? z7mfG-&uNjOnTy&O5XcGmV96FP$DqtSY9|AhUqvdA#T&ANQ4q zJh#b&L_X>du4#QGJ>uf?{J^~9D{j&4(fknR#=lpqxa@N$wMujk1-|KR?9pm*>Mq5L zQhd^kQU6_zD;{e;*lx-gUu8@Ekds?HXQjMNDg|Cjz@#19q;p8{*(6ILf%Mr7JBM#S z;C~s+$H%3rU(9(G&c?84*o@a}**qVs-}EVDnq;;Eb=k zqA;Dh{L{qUTDqgHKWNhehY0PYBash{F7WNlDVwhNLP;M}fgd{)&Rx04q)=Da0>S^k z#bpT(su-3b5WBTZ>rQsSY|3%ai`%cpdh(t!xu|#Mx6m9025hzj=2zUTB!MyELuI%U z1U$Kaht6vJ9gPZpZjQMtaJW!n{k>iB*)w$9EHslR*c?N{fjdD@IdnSQ_eQ}iO*%gRJ z)N}!{Mt8S|f-vB6;v^NI1TOrok*CWrNs-RJ=BGUq0gM4@U2wq zF7)0a5R9nsMBU9aTO(8bfpZf8>0g9ASckp4TKtXLssT}kjb#K7bd4H=A$J!gH{Tu} z<`s1!C|1xDo+zmQF*NXetf&iq1uXhQ0mRli06))@4>?EaT8AOF0)tA6)a5z^O0sPWC6FJTkZ-sw3Ofg) zNRj0%OK3-AIr{dq?(orjKwW>I$*hKuk7?w{W< z>)tLF0cWJvA!lOz;EHUx2T5` z<0hDEVFqwHSVPvup9wkSg^BeY9BmGT%N3nxTHggA53g@A8{ME_58Equ2pb%%=eh;7 zYRrl*MywBNo->>l9NR7OqKwlNIAGfrH}I8C#9HPA<#9-n^%`y%a5W4V5hEh3Ddtvn z$_ejd2>98?Z@Ny-Eg%o0@-&MNK#GdI#Pof zcd?*bLg+@zYSe6YW7yTLuKaCHaHFumIO>qpQR719UU)8*#xO^YJevXvdpb9?D^9O; zrmtxF`AYY}^37AAU*bmG`p&Tm&S-GiM~XUW-b)sj^0f4(U(tsK&wM?fs5v4GySNpU z5WbRH^c+AgHjTYi2}K`4Wfw<_ET9H47o_MzyV|m_yHt7jjZgned3ea_+@EIwR@)Sm z?^-%%=|`d2H7u||M%!RC>cRHo6)fhrly1bQsi=mW;%MNuQdIkNnqaZON2ws)^{^^g z-FmqyPSNE%^Sa`59>%YysIo2AFrNloZ(C}jFW30Qr$lL&Eg%W_#X?WfO$Rn{|DQA{nnmps=PvreF__(f)R zeY)V((0U(_k7;If1~L~-HzobWKXQY#N>JpI(PE3wZcNhz{%yo7lA)M zr#*3c<_hon0|Rac<-<;I5jCjWB3LJSQ8hmmI6a*RyUpx0Ik#;U>ck6q8+vTsSr%F} z(!w(3mb)HRe##<`ICQcOx!M(!L%eb89npUN7c*~0ctnL6b$xKU4WRc0QMMzgZUDH9 zzCVtZzqa4;r2GnAS0qf%&fNQZxT^5^etjO|AQiZ7_Xk3*QF-#62OjBg!J?3}-HEOn@ILa~H#0;_ZOHNK(6f3EFH0+ZwdbBLL?u?;Cg8%9^;Gvv zo-PQON?}kGzeO7yPv@t0>he4X2$wXXr~|6rN!Y9J2Ui1aZ}_&QxvROyP$kFRz|Eu} z(5mDqZXJ{NDMxLn?k`%F#k2{6-I{N&Hsy}aEcqVVB~pk?h2H&H{Ufq^n)m7NtxyK_ z_gK`6K@65oUHTjnWj>=Vui0ac=W?i!L9Yen?GnpUi8=HmJfUzVhKJ+;yb#Oec1aSs z2SvgYq3F#Czv53aT}19xwF6IECh~tDwqVu(so6;Q19{BlTcXVrO@9o-F=a+FSoUKU zQ`8f4PF0_sy7jJUPR4gn{noEPDHsmQV52(3j$Xw)DtLDlM=aKy>Ct?*o{F+vw53WN zXKb-aD{4)BJ9T<)0i*%>a4~nvX|_T8_J&Na8SH9NTI3fwN9S(-a}h%1Cjza)XO=hO ziRdcWQowQ=>N4btAlkz7PI75T?L1V+ejB(PgLVa@`%_V8?Pw?R%PF7dyXC)^vA!i? zfIDggBE>^0Z-gKdm)?f}Lc|6nRZ_L#^29Vp(#t=&{D@C3Qg&*vC z`mF?))c!Ri8&inEXeaxuf>rF9X@>Qn@^$!cC_@}aiqt+~tAJ}PY zST8Z@dEhvlzwV0NxrCS@;-gr^Cq54`y_yo5B=81soQ*o8%zt!77Vs$u5F`=(8X3ff zaj-$k>#lji%>Y3mW}A->QmgM5&RSCan!-wAjo8At)?e=mQA^6GJm%5D(I{q6$PGN& zvn|P~Qx%_%-sSv2Y9^HvRpb_IaLLNqR+cV4;I{yk@Sb?QfXzOv4sZ6{-T%&b=**pY-%TxX>8}c;Z8+ZfUT(hW`7`bZ zvlJhP;~~#7??+_yZ}cTNN^keMLrC5SUWc>8>K>DuVqg6UxW&xHSkjH(`j2q!Uuc zXj1i5#n{F4>JYIc9-+)ukO&`X=eCjED;_NAAg-;37BYI$#_V2!EI&sv8muw zDm&%yLsj#P*9mkQ+!H%Jh+{ud%fV05j0-*F0K@ z*x|aeP1!T-8izy&9aEUmJ-A zEv}SLR|tSOHaA~B#m*uy<4j{_oh)5|Kf;E?4GH?N44amousD8bDFAM%zF_e7y1SCO zlUUzNjTltBN}Tkuf^1<>U^G@k@bg=Vp(WaVWb+3^3cUqk`X}{2F;5HF?t9B@G|3@z@g;$IwM5He$LH!p?tbE+?%B8Y6C> zF5q7L6xDFtq1j2QQP8f+u2{z5$Fg(9s(136o-Je-Qm7i`jqroKin&&YJKL~QCE!iZ z`M-l~G{`QSg;mfgT*zvAAPRw=kIUx5x<6-#9{>{k30LatoFz!S#6^^b+An`<1 zgjRI$H44LrmJCUCql!1G*rEMm_u_K2Nl)@c&hcsndQ`4nu3cg%utbJ3#Wk7GU}R{; zTW&KtMB`VweUD-Ch#t!4n8JKL=m^umlOVFQ{%NI%%cdgY?CBtl|Jo)~qXj<^N9IkB zb3+;vgA0wV01#q@=QQ^bKe=vL9-ko6eqe#=Mo$1wQjklD!bzSClRQ zYgj{9(;f!1R0qvaeF&(1->>$_Bck=b#S5DsQ?oST&ny62_rBk>ru6m|Nl~;BP{eqZ*8Q6IJo+`w=H^^&a@zGI@6VE8f)Pc_&4VRQT&O*N$zz zwCqNzM@h>fpQ=+GxsTuDxsqC?ai?nzRVW3OU}lEoE!6Pst`?XSG>{qave~(DZRlI@ zuX?(7M#lkFA0Y85j^9inf=lJoke2EN;N*^}@q*GAXav##tm0kqPKGCpllBjKa zZmHWFEeo5hBebP?E*xA$^68ooF}V>uOZenN-rqikho%~N0!nWCQtvvYJ6{t7cfIkV z%6Ciq;!XOyMFT{)Hl97DG+5B!_@u#iaNRA1sin=Hp2q6jCiMx!-sz{Qh@7d$!=#FE z9ygBw0l-!_frwA{3`Swb?G9#h{@oOrvCT_r!d zw+l>ny&h6B7jEGTUneM1m!Zdg-qv$!+vif0 zLGzM+NX}kgyNh^(8lU{{TjWB7`z-5lbE z%fd4}7~rI-MYt&vX7HVcXndr0L);yOJ!Q*LT+Rc%w~<^S;Nv2ySKMbr^{hASf{{;e zt&b3MZ&Ln?!mi}a4uATm@kka_T0V zQ=PEedu2OdgWhRZtVzL=B9C6m6{aT}uFLX+|E(;v zQU!gwF3#>r$hcdp9a~g@Pj{3xf5{=F$rTu4;D&53k3OPtoj2R9GKUi zXnZGoLd0z+S0zhcpH20Pz_`K@C=WZl1=3d#%oK< zCf<PB*m`9?Y4J5pcU))aNyF3nNl}F%yg#YX#Wu?{cH0NG@of*g}B}6(Y z)=zIC?MP%^LLm;EL_K6^lPn%(I_BkI0w=HO zKzG{rFRn;_McIf3n#e z9n3Dh^>Mr<3G8BRfGc^E zZ2v}ki>P9Ex)R#gPP}U6awdv?ifp#9?1L5H!}-R4tR02DiO{Cj_CGpYSB|xlRyW;J zy||_5T{j>zHu;YMk{ouYV|-oR+pBHNND)4qOU|^n@6~*1Z+90`$J&V{a>m*}zDx6Q zas)UScZd%$;wgP;Ib7&$QK#U_S+C<$6c?fK+H=Y;4KEVeD<1Q8C%6shePcbb!_#a0 zj*^n8DQR$2Xz&}{S=;vSsp4W8t(Jx`h!I}~#nSU_Yte@hI#RBJ1KTkB!-QVGwV_@V z3$2vz^(KM7wMITpFHx_pE$>JidR`BG7hFVc?kuhBKg1}>PYYket512SM%J@kw8=>8 zLm1P*8f)q#6K!|}9#y^kq}91-!P+|LafD;|*HNP4WS@Tv$>kNj;yIJp10EUi6%wVq zP5OEO5#5&~JDC}vywgJHe<>X5^eIN(IDI`zi_TM*e*UF!Lxj_(=GQb6%c7CEqbH2G z>{(Jj(+m(6!{F9)qYY|?!^g_?(9vLZ=HHA^*BfHLVTB^Trn4k)1sDd*O!Ao+iAzqWNjiu$@qi*y%ojv9P;E4i~V|tI#t*FQ^oda$m50LI}m}F6xdj zBI^w`nq8NC!($@(=FPU9^c(AI2oaG;BQ?=SK5Rge5XRO+lE^J)s6)VHXU6`e8l}qi^F`U0cNu9u#*1Aw`ltJwSZ{D+?_aC1 z_Jq)sZPmrrVWfyO)GdeR{QRJ(7orWxz={y(5z~Xu&DcUoI!X+RJ3KCa@D1XKzKGd$ zjT&O?;&eY30-ZbX@^uVa`?%L|O;^{Ko)k)UK!2qZm?FQUC{lMgz=`rRt&u(9PH+ep zen-og%E4c9_i<=-O#PZ7{vuqu*+9#}pQenI&VxH)(q+@kX@y>KUaBnNCOj77rvkzE z@k=wfv1ycFO>_mX!n|l?f*Ui+mYEY&Lgm*2w0}q-)TyQ^ibj!u3}?^GE@DJLTkr$R zJ&A?J54s5HZ#(xJ${takbVt4CQ3-u6$kua1P;J4O?4JVObP;=Uc=EX(HJ%1inar7g zl?6%K6K?#`6SL|~U{+H@LDs+uYPnl z?VMeY^wcF2O+NR1KmlC>u!dYxm7JOPU>qx2HtLYNTvc-;Ek%ae4GKxN^@}K@pfkQT zPPEEiJ$2mq678Ga)#s(&swecNV$0XnCA@_7fJiJS>>A6RD`&LZ7A|3O5K;>7&x_88 zyx0_oS@wscwpHLpg-Ap2OVk+oy6@t^eCaV7?FvKM+$F(7SPz*metf1;d6^wP!Cmfg z<~A55h4gW>i~a9TTsx4c4IUFCaetfEsU3Pxs`QaPjY;b@?QRLMN=r6*hESsZ45)QR z)?D%Vkx*vgTncI_r94r#pxPIB(41TFoIc>ehm?k*E>wQtL;4#zmmZz+!U=x}>&=M{ zw1#)Rvu3z-?%L)U;nGLI8;r*s{}~3Rk;~HtF;-^`yos}IN5S>4)hX?N`TQ{*`4}Nj zpn_kdg0gtoI-eOaw2BV{5mo4o+0b3P17BPzHsXuvIF$U4m{P=PFT|?hnG8u@2l{AX z9d~);oygRi3qM?k?~ttdfBa*sR*1TXYFMWk^+^!4twkEDB!oi( z+p+HAD~4E8KSBUkq|M!qfhb$boDj>lFD69dg!o(`qCNMyn^f{(8>rkH(N9;OhHfjWWmQkcWlydYT!j*T4r@*1P5= zQ&`-a&!FNJdOJ^ytN(NH`4{f2nW_9{JUkpPGT$idK+@x)iTbM&qqHtfsLb@uugcXd9sT}Vs|iaN-|3slJ)AnqCn>Yz( z4=qwP291^I<^M*`&i|W*bS@EWA7pXbRtFFf(46%r0Ngq!Gi>#y5c?3U28W^cHBc#5 z=G0ryk1?{qR>w-*6Wz>Z(c(R7Wue$uTHk!jxIP@>?)F~ARW0Xk>lgemHP$aM>ZKL$ zzY^9wAa+91QgQ7v;WPF*Bl3Z9p&lb2pucqcb+fOn%)-4ZOQCr79JcGnpT8Q0%*P&j zvqP3A2s$b(_b};B-Guq^!%|j&>v-JRne-b7>-Ld2(N(3 z9~79oT2r(D);;Kt)M@lQwE7uw+|3U2_Vtc!;0G5v0=4vHg^SpLIuv6)b>LKl+X~E8 zan@~xD`Cjqb|>RRe1_iq9V^7oz1Nm9*d6!92LW0%7W?B@4cs%ty-s=5{z|tdw)dB_ zLELa0u8Wdy)EKt;0GT5a&lY({L)S0oX9(|Cr*Q(&_NE^5{ixeWH>oxtH2Mo2{*y-f zgeX>o*{cigh10XMo*o0)6I3*y)Ke{z)h$tdnvkWi*k1na>xFd@-$RYXHWv+juMo67 zUNXdsp0FXYP&n|C_Fc-5y{bVJh_aqLMk-}9FElv8NcjI%h~*Z#d~5^NFxm!opL48! zN3$JA)YxM8di2_ZNI?J1&;mmr`4W5t5Q}XrA9@Q6a?$6e+kb%KZaVhxzjgC z8YlF%q4@Y;@XP6eZK@^hc-TaoKxyn>o5IIlF8~JL<$loisJ2oAk+c+PIrj7(XVQzd zouwd)>v#D>=X62kUvD_s%5y4pEXS=aH5mhH5Tql(`|x^lpTchYNs6xkLixot>L5yQ zILC(aCwufc36s$Yhc0J}KYG?g?h8Ij17;r_ty#uR^VLW1^^nX=R-E#dFZyA-(5=z- z_FR@r?OL?O7AI;vv@b+8OJ~I|*<5f2cReLI=ANC>cQ;^)1id)i*B{jWA!hFz(nrSe zqRf>Gq6G)_@w@}BKzIeZ4f4ml#WHnOJZU(CBoGQzs)L=;OMaoj_f$h=81NRk( z>+5^i2^a|zG-==u%#>2*`MPN)w8qR40(vF*D3U%A^XhbeyP@rQs+Kn71~R*`R+Y8y zNm)B4_4po&suLsljFSmurfU_dHXozFKDRstfwST;1S%a9P}fZ`bVnD_#_lCjiLskR z-U=5Y@kNhuXvM8NViSlOPHnl!epHz?Z+Ys_(~|1IEI`N{qp5so1jf7K!M?I$qIg?| z|4b!I6{7hn$6UBj;sXO@f&sfV;2`)S9S1Pji(lXm(-RFthLtIv52{{mJZI<3Hu?@f zstD0<6SuIZ4vSR)&AVhK%-u=6oMd-|#9T{@f0~~^7cRYI-0~WSQ8P^>8q}jxSq6@4 zjv>XQZuOo!*}u!*7dDV_^Zq+`-(4N$m1i-Ru>-dZ4xg<<#9m5K)Qls^m{3~O_{gm< zxm5M#yv|NbSYJ|y)VC$PPRY|iRfik?R1Nf8Ypu(CB27Ma%V)>Rxp4uy;iI>^?C+Vf|CL&bamE9fJwdm!CDdM3(~2{nB_%3Sxymb~M4b zS8LzTOxTy5pfeV-nXk;?z5M*ky+0e*4|IU{5>9|SiO^kYIa9jatsB7}R5O7X98=u- z+&8_-WsoXFm7c7*`bY29@IhpNA#B~rJUVY^Yq%1&GZ^O}qX&A%wEtQ&{8`NhR~_9$ z!HTw@U-L*6w{4E_GzmP2$Y}He-5PQ6RpOW|0YNfTo{M~!SnnfI$WlNo72oy(cym4k z{tXIDkoPBHOcAZZ)6K8_V=WyWaCpPXXi`A#Yh1W59jksun`ALN;oqTZ@zi1~VI^eo zFAoGE{VrsT&Cu2dozO?8G5q3n3MbbeH0YN4;@XYTTC>9>c3p_k>BkydG^HOF@Qg~Dihq=Bkkr!~!MRUlP z7IoFt=8(IB!5&eL$=9SzVEd5ZxAdof5zIoD zPxF|?&>@XbhAXUq!4rjHV38{4)&veR_VA{^d1bKCr=|p)+QA9=;f`K7YuOVZv$#omMZnsoT2pVqk|!MU|MOz6m^otm3Q2UPJU|@F!y4#lPveBaFTjW7u; z6w>F=g;K68Pw+xWhs>Y;JE+(t^9t8xqH&2LQmSp<;S7Uh$4u2W4@Zm~wyyB$QM9lF zme(;HP}dLF%W^^0X{r`>8hvw3t#6c7G(gL?_r6V*rm9$T(u&&1H}2N|Ao+TbH}TS+ z`aZi@WFEhhQY0rRPZG}*S!=D7*OsZd(oce(Jt&ucsQk?KG*>g1Jgas!gG2&;9M47@%3ZCd_rz+z zP39C~fDE8>_eNJJ6mlG*W&%vke(iS+jaUUpQtX55OhBThaMus`n|F7^P%Zs1(`?Bw zHL)Ct@Sv~fP^M=V_?Fkh?Z|WC0%*Sy+o*D*{s`K=bANs$>@vUflfV2{j)Av+!kx!G zktV1BQHD^SKOSaYm*TnS*ae4@#p~pe5K)ZJ`5`+(k;1?J( zscfMGP-zrW8>sh>^^Dx3SF6UK19A{+dGL0=1mzUH3jGE(ddc7Rt&HxmZsTHH6n&Nd zXIeKDh21k`(Kp=VOGXh;`5f+nVKQam*_IG803B_aBb(M=Jzza^P4;LRfv)UioL(w; zconv`&FHUMv7T`yd!&v)$AI5(asW!8`h`Q}=2h6zrmDYM%zCDl>`^iTo!iMcyi{;Y zpgbf)THMJvzEp7cqHAqS&|e*5Ju^%8s2PC*;_XWXXRm>Ts6*BS$3wn^tHZK{ z^Fuy(EvgLu%lGO@jNYS+?260}8d&8m`UY|7`Ld9fMGG=Jq7>xI2a_eTvanV^^4mvo5G zn0))9SeBLVAfMBaQ#ff9#aQTG@y5l9A+-1z{J!{$Fi0MUUNOndD(qH}+3Z%3Ebzlj zW+qCyB;-ADUE!WF*d+eC{MC0D+?&ESPvqITo(Zbt24kVL>*NgJChHDGBx85$&+Wh|K2sQX-paP^s&^M-{~+`nBWk2C5}~^sCYTCl|TG5Hg*o;p+6CZ?xs%}4%*~c zx47($vuV&6+T>30i^;qcs_FvoP;t(J#F5TMxI8W36My92nMlhu?QzkHB2O3c)u*Yl zzHN6THJ*hlD6;7x)T%ndyuCLtdJd_w44M$P*VCKIKT3eo4zI6!5PDjN8|0ldR=ns) z8pVxJ_9BAfnFEi>0pFoUra@COer!^Kru^rOKPojZ0P_S*1u#zp0P`fjgnpn*SJKWN zTMlDGqi&ng-ivM(jjrsb*Js1`$J#9+A5M;lH@r>p*R%NE0z1<5Uojw7B1=KO-dPI}iL+ zF!3rM54rtH>AE8d8n!hV5(^AfN&{;$vH`aVxd+M62Jp^Se)q;plu#y~8G(~H(D8{N7{TW8_dsqqBKv{!*_&3|{o386UQm_-<7u&!Bo=9jn5?$ei z4Ca=?8-5^SL+&#t`7V*jc z%=(PVJ}TrIaAz1j=DQx=oW|x&LS?5VRsCt=3&>>H^$3khnl54aXZ79I4>U5>an7-#Guj9TgYZSP?q>Epb{-Bk zF_PyfS~uwkl0w7M;9ql6d4i_6q|h| zd?CBtmuu6K8Orr3eLS!VO8NbTgV{P4LRejZ8byfyU=>yyxE+tMc-{vUqy1ohi4n(q zI$5QyabsT5bnQ~>FI@K8cu+7w5VQVe%29o?ho$s}t=fOb#n8JkdGEX{jZWy#mC=tI z6dD@pLh0kYv1rgFS6|YcOip|MO`yNze`qqCo@0J9z&6$97&{HM$gXb-1D3hjNR>nyuex zf|itN|L5ZqH*H*;dq75H)k52V9RKrkC=#sXXy)Vz{aOaL-LBF`E8jU_lU> zuomDS6LzAZBFQpti~Ht)X6&Mw>8Wnu!VfgxNyK1^b;>AS6UEZfa^=%`w_yn<(F!Ry z5atO^nUVs3@FA|y2W?$=&cL3WmCmSV&Vcut$nx8U%L2?aq#Iy#{i5wxIsXIGaImYAdSh9$M#s zfD&7kB6Jl-;Se}>PYnE)k(6HBuNT0{aggL2`$aS(C#Vh;ukWbBTn2x#cY(f`%q#ol z44{Nn{(b?=U`zkPynR_8^+hoP=wpt2%XO#@uf;9vNX+mC;vp(PJY-r@*~NK=0290#Nb87_@lqazotDf0M=>pz@lUvr zU0M1>EUYz@JNsqP#yd-a(A3Ggc^(Z1%2JoEG_zYDS<~CR^&KLkn(d(V`n|GgL>T-f z(=zDG)O9{_+J=TYnpQ-0ef(Y7D1>N~=KHhy_?(tZq<|rigl__naC-Y3F~d;{Q+m8!oNN z<2NRSo?3%J2zVs$b2Y{UtY(vI4s5~;%KicoHhDu;F7ui1c=Fl~@gH=qEr-3o;yr2L z!v&QGY*7^Qi`U%kxl_3eX&nV|{}(lUj8(o?Zswmx{y(ZLtmyI)axfcjp& z_x_)%jt8jch#P<39WG&uxW`;)c)4wc9XIU1u&uHRPtJS)GfjDK`T8YGqVv{pH9?y# zPMm?oQPBIWji3ng0Rex7q#8$T!&*~4@{T4Y0t~dVqn0r1`lMhPCZd;r98XAnIh)P` zM`Kl2u$P)EY&t=^zQ4XfyGB$Y_Yhk|a>qHq$L^m1Ux=h%FY#MD&56e%er zd^2^v`&!ck*Eu;^5u1E2JLXBEqvu9zifri=ggd2IT5#`ho)BMhkxydG+l@lA&E?M3 z2W)JMT4ha>C)%9&y_00NU!%LhR4iQld^poDB4xLPY+i-;wgMAt5JX$ku)T37!cUNn zep}`ZuNZr6X7{Mgjk680iaRQM6=n%8U7GaO(HS)=vH;suj6Vi^51D#1rG5xJLu64 zx9>WuO^1va$f&YbzNWM#UJLVJZvS|HGpteNI`l`S3Is{}F7r@0loIjIg8Mj1p35To zT2D8lL7xh0G23?FiNap6mA@-L01ag)Kcnh*ZR9Vt)ulg$j`?mVcBV_+e-*KcEU7W`W8e+rN?>c0#KGx~#j6y9!DiA9y}k zecK}EAy=&Q_H6rBu*I;t!PC4=Za*Nmy3x?N{nRo8ST6xH7q+V#t09}Q|7Eb$J~BV3 zw6v1TP5qQVuY!KP-rwDehOfw&yMR_z6g}uY-lWR%fnv{hrw|wvD@f>t{Nsoaf$%nl;3ZAWv+$VpFigR;@$jH77!TWsQCN6U};m~5uhKJ!A-e@{gA&(NnonQ zC>nN)Y7OkqXnvfHBhP)}iej7v{g8{pe~l41TYo5N!ewc6=j@YQ&UKG91K+&Q1N3B_ z4-cpY8nF%(`jrAJ%dLN=U9WDuJ$lA2j>um%vWh5YkL${PrEiQgQfiIXt^LYpMm@A% zB4BSP0sJ^}8WOm#{;%?GB@2J*&0YCFb+q=Y+f0@~Rm59>`|YdT{3vo~8LkX}4%C{|TxcaMMtY;F*9yue>shy1dO9fXiIzX(q`jYjm>4T~J zWB>6()Zz_k?Gf+$?+&9CYhUy`*<1gkAz|u)C1Lb|8fP&NHuk^UvI*-4_)q5R%l|T8 zof7y-e(G;i0x{svOP?jk^s?sF`SN9>|^-*197mKwqoYeO|M_x zAV&CXWsHFtN}tqlKo!6^m}LX9CqvHu(TSQ!64*`(*N_?3#L6azI%EjpdAZ1V^arRdae zggV&1f~6EA{Cd>GOUD8<)TJ3wu)t%;nDF@}?l@^Nl@G(!8=XpM+Mytz1)kY1oK?cHR`v}o7gLeRPt z2Ur_2C+5x1JF^I@S>=3Ab^^a_;TgsIIBZ#mlK48R=-IPId2>(UJ2#A!J$9OD7@HPgRCB`Eit6R3(E=1*k%M2iQ{9#;Wm?UIU=2^$S#t(n zi|yj-BcwFXQ^$2RFnLICNZu^KkacG{#6`|C)_To{4D))l1rsBLYGgZW`pr*Q!g9|G zl|#(26Y_YS;hD6wGRf23e;1lRwI51>F8sgD>!G@75wLIEQ=Nzs$)mYxG3Kd+N;6;qcdUYdX1{0KV12gTPpA^3$bOQH z(iFc$M#Td0KmMw=G3)vy-;Qi!XJWE1dKgd@edi6|>lEtGljxBwy2?D!#o?sEoMsi9 zv$z?D`$U?`{0F+O;~fqsJ7zsD7*J}5W@y=cT&~8o>%V*-x@QR^&O(uS(Q~&XQC64) z{VQMjRjIS~|Fa=fiwJd3EVKXENd}1tt%W-WJ@n$&quqRF!eE$-Qj=Y*LijP&cM}^k4pEg={lsnQEAJtIXR4wv8n!>{Xh{K%Sd#c6(+ zQzv09DPNl(?gqqGc}r0Jz|jGfV(4W~eIDjZ_qVPgP$31EEnPflTkRGJRlQ*e{LK%z zAQ}XR?aM#5DYaW)>fI#AH!^vI_zXHrH*2yKcL_Pk@SnEJS-Zp-I)h?xU==uVL4CQ( zRCFZ%pz@_CySs~6xT%tTh0YbY{1Ni7$m!k0Slh4J5*N?<_PjEZDYsiC+;4S zuv3ziV#a_$p}#n|8xVC)JcD`GJCw^ry7;>Rn|()sl1ad51}V$=(R1!&=+MqdiYEvZ z<4u+a7XoF;t(=&v;=U!0J3jM`0b1q0@MWn4WyT_nOo=rpaB#BMT-ugXaRU%Gyw0jqg?|~ zv?)bR;X_knx!Qo!!gel`<~INBXZWP>)ObJ(aGYsMACCfEjH8; ztyA0Rt9KK6`sEoGA9lZ$a3;U^+C8L5`xN^yTCqZadSGXiM^%<;29Db+c!EsS<_>!= zF)jFDd76oqv7GBJV)>U(pltjc|1*7)_Qun83xG@5dgGnw?h6Jx$GQXCLE01IH~4-t zJ{g6qUK0l*1z;*My&3VjQh?B~fAIMoujF}brAu!y7c@}Xq#j_3WN@5e1~wB)3B9lL z-a9VVi^b-@Xp6WW9M$R*4C{iBPq7+;LaT& zB@lb$nBz}&s(wZct1v5TL0PD+hDn6&aJ>;jQ1h7W?0k6lSHbZao!9{Wb zZOv0l#@MpyMC$v3VtEc_7toOMm^zIQH=VOr`<;MX9$Y_ARv{B{kvZ!RSedO$2nVGP>3mW9RZ^LJF8e94q-(}w|SK^0pdAbhz4gupyj4ir> z*L;+2c8=y7`=D?GZs^USTuPo&>$kiJz*QIrc<%936HVh40nfc0;JNPsJohTvD_31K z&8c>Pr_eC@OurNnUihtdxQX_xtXX3*bAom&?G43cHm8e@K`CJ3i zIj&5$*Aq!~kxPxkG+DD8YBQciV_5OSDyC|*kNN#Zuw;@gWFYH+1TKEz)^{13G!)~P zFPT=|z{>q%j;o(_fK>LLx@2=g%Y53vs}?pvH-zVGS%m|*=;#O|Yg_t&(( zF<+2t;x4Fc2|)9*dCTL`HJpuc@oYW2$lIBR7s3!<1a;0l!HeB1Nndle4I}LInlAtnJXXchLT-dYmE>QB zccf<33Yn+?I``aM*9Pn3#h8h)5ZT8_Z-sfiU=r~q!OLf@LyNwb;T1!o^ZUBNfdhXR za~&3E9;y*Fz6dIqB6F^{r%Y*aQ=N}Z-Kl7C9V>CVTY%e1;7|d53~g9#k&r${3Tw!_ zWbuL#FdL|RY$w*rX>bewS%_=!sHvtrpKCokl9`vFa6hm}SfJTE1y&@Ng)p#IUrRfK zC){jy{4TcrP~DS*CY}{%(Sbq+Azo%w8gfvB{ZmL2;=cjjrH;eX1*OGE#Ipr$4))@e zP~)<1+K%+XgT8QJPXw~y^7fc-wrNYo;TuC+;)ce_`p?}H1)QPVR7qGmZsOA?kx~2Q z3xi=^5v$?p5Bp9NU!ucq4Jh((#X3{?BA14P3bc(x>3oJ*LZU{`scaz&Qt|%lQSo#H zc90oQ%++mztoktZy~yNI^QGshB!T!v(A83Ry!>@|7?SjqTU<4pz%jZpmOi1^_k1DH zo{gIKNpDVw9=EOhs`fFJ05^w$EPWHNcIZB^&31`IjgzbqvX*U=B7uQuN_l;l!mDbO zxV4}l(FFpJEKj9h?jF}L)Eq0cB79zzb+t(!k(`qbk3?drE2~-QOZ*0u`eZVN zWpiwJ7C84aoyNBswuNPbn8s2wwu0&{>ZI0%M$u|6O5(N$^m#;94}oc%XtaZ%C^Ioj zSD8K0FzG}p@g)_9aZvFHx_In<)zT2BnwASriAZOQ&qBX;P7!WEGn4jVM z$R8C4=H;NfKS7_M=};h;_I&JSQsGw_O;9)9n*JH-Xe*huyTn-e_F3L1@|GQccxX%3 z3je%OvX3LR3#SKrH@hkxmw7exUTXLKu!)LUOI$Ot*Y2-LS1e$PB4Z%%41RP3-V;Ab z&I0{xog?ww#~l<$?Js{H?Dh^Yt-B#a`XFr7BcaF;Ow-pGfp=$6`;KQ(pGXO(K?&^wsJjjN{Hu?()(RKt}N5uo-f$?As6h%rpIA-E%nf-6*W=H*nIEt= zn5iP#g3ZMb%@`a^F@9gF_Q^=j_lmU0g{$np%0JGiDr6F@B+L#)xkuh?NIbEVEB;tLMV~2ZO;PWu6VAL&7GRt@AgID9k0X4JAeS8#m z*>QMVUKSDyqh9?NDzukvwRJq6tIejhTKIz-cR`aS4wCl04VBq(n_#-rPlN5GWY}f# zf*?z?=yhrg6()IE;*q&y6o1Zd1$Tu4NATKD6f)sa!Gblnc3ndl=qXqIfp4%m_%0`1 zbNr_au+I^Kd`V}C@$vvF|Bw3rqxJvj!9Pll|J17dj|Smy^JmO91NF4o6M#O)4{p@? z{WE_FTTkTDJP$pE>q@o{lXk2PRYgPo&}Ie>8f)W-vu+Q0Z*WjQHCjrwt@{$_a!UG> z%Fs}1uo1^{R~_r}RVe2p z4m_WbO749Kq(G-i_fOn5q`*7&lFHUznVDut^4$$!>TosEYY6-R`Y>Y_RyH*O=2 zzs-U1>>Z8u%$vnyT0PeV#plX1@I{BJSyzuKl(w_>+Cl`?u|2LH-kHdvP=qnu8QP%a&)nzkL?cTs@a=g@`!P+_qMke7#FUY|4OQlj z)~s4k-$KNGEZnrp`KwkYa-DUlKJrKPPkznc#Ixw*w>wbAUyA&|7Ela@>H5cx8?&D? zxI)Au|IB=PbbbGq0pk9bAvpTv50J(4Sct;@peP4H{Kh)OA>5k5O=oadzD;@cE=E5DYoT;;yE;rBD?Dz z77TWu4W2VVp1x*wyCfQEz&HLK$RCV)@4Ama8Hv$uy<1<*c2kymsKY&1Z(U+Dr}n+1 zxI$f3zqFu5L*A{Nttt%OOy#@oxmR*EOKJ3UZ_IL51SmRfo2cRhd=kVhp`i zo5C>tw(&-|7;+fkg<7;_!|;+cZwJ@sd>YZCPSkbFvT38Zgvy9Ut5kyD&A`r=J7_BW zml7}YLekHf+)uW{Ejfm(>xYJtKXwuGwaera{NW162}M5zGBWSDnq3*~H!<{I%LF;c ziI7dR6FAoRZTjfAToRGRd7&FA(!~I&MKK7W2?KngaRc;lJ3cQU2gxgPx*%a-Av9@# zUWgVNQ;p3O;~%hmEGTs_G-SHY_X7HF)YC|1Z?{Vz$@`Ls$fV(lh=`-{iioNyT~La6 zYREJ(4ybfv0 z!ne{KJ|r4xpCiv-nzlbVyHC61YvhJYj=|m%MxdFpB9XRMW)B(9t@*o0CB=*V_9;=6 zg?~i?jlDJOuK2s5Y`hp?;j#i2u7rx35r9*PmJtRlTo(M0H!n+pJW=yS`QF#f$FvV0 z4bI($YA`W6hlVe)!$U`Rc=<&=e}KcVrd@*W(z;O%oywlIy=|%~G+uu6J?LU&4_;>;i(0qq;u^y{GTc>7e(?wI zuRQC-%*Q~rm_XQD{k@va_v7fp2a^`Tqo-`$fu|`2Sl#klGw&~iD@|kOc}RQ|zf}YT zY_s#L>yd}xt2&JkORaz3O@K%!P+TGG;<;%tp#eMr?0bhbv2*^6>m`a89(f{q#;$cbie zPhW0NdD#~K&YS-upTT&sIcHmX0FePkWn_XokQ>UjH=4oKM#l4~y0~p|nzyl&?k)Un zgx`hk)ql1aDAPa2{~Msk1%N!p;Att2y9y-038vHxm)d|+6Q}`cVU+4>maC&k28AU> zD^EfS4JY-h_q69Nx(7SHU&Fsw{zgWcy$P!^?y5guOD{2-%V=dvq0Hl2eePzH?or8h zW`XE+?|O9Ap`-y9a(#>YyVJ=XWq?98iCg_6W+RVp+iY;MFMYDO3_ReG)<44AOwgb# zmM7(a*% zx#3f&WEEQX2IX(L3krD3V}2KPiW|cLnO zlz1}rA?jcQvP~2;;xh4L*}wA=_zwAeeE>?1sgLJ8*h-^Mmw}=NTZg+(X$kA8BP(gP zJ=g|#gLTRXmBh%xvIDOO$soU;3{C_3(hIbm|9f=HYivwiNTd{e{ue~8{25Kn# za1GzRzU}~XsQO{WVbZQ%#DSfqy4Wx^H(17*Njd<0BC|!})lLb8r9QvuPgGvad%5P_!k+UJSw@xFEiLyIvFnC zw>Syq237qywp=^!@c8iDpfhtyY@yui#9NAf>t5amC`n&_D)_;<^k5+ifD+*V)XX%d zfyx16^gHJgjO(sk!Asn@Ei+E)UyAaQfVT9=Ab!%}yrL5*;d6NDmq1Ah^9xVfB*NRvVG3#B{f;0QqqJ1rCn9G)AIBFeoiF7O zaM$v3q(XUTuz`U{%z_m@(!o=*zn~#s6H7(?ngjqUZu{3|u0MM2U2ismg*0_^$$M&S zh+@`$YnabgDdWRVrVH~KW0&$N-~G}k)k8ROE1zB~_^rn>EnWC~SxSq}qKh<(=Tp?P zS;7_$4^r(iUZk4WeNtM<2T6F`BbG?!r#xb7wX#D$Da`m>%Wi|<&WV&FUA#xk3JTcr zWU9$F$*^Wv?r%g%g>Jet{}n{o)O=7?oLsZuE>!v)T}tJi}jAOw>7_}M9Obawu@nk##LT|fm zVCqT|HRO{|hi$eH7nZdGhw?wF)j77{FaWlI}( zwG(!4$JgPa>Z9(g@bIcX0@#U3iW${-&L2$Ci5{WyFl{~XD0+F@|BHRH?B$-- zx?ar(^zEry#N{5E*s)x7b(Eek`#t9MtNnD^a4rq_Vo(yjfVMfIMh?a$W9>+oz+mZN zPihw@6t0snx~=NqHC8fze(9Fv5kMC{$w;H>(EJp3OYt6=E8)EPtf?KAQrxI_;#L6i zPP(6Y*S;gUtH>#N8&OgMWLhYzC!qr$;HvUJ)D8Z&>Q6EAt9&-Fv|y8PuiCcrXZvmn zzP#~)+MFVMH0%AaAYRH_^IxCM|8S}9f=7N^6^x312F{rh!d%M9VNOv~wm+EYHCTg6 z^VB>X_pd>osMB0KJD%a{D^@?CehRTD?~0aFJ&{xZ?~xCrLa!K4OP*Nfj0WV0JrTVp z;tr6_Scw#rKDc@q2d1P94e;gKXYuq`U&j%p%`jOtK5T!xD39#D5!*L*QSWX@SLhVA zFq)wGW-a(W`=bN`<_%TtYg*%O^5J_yyN{33Y9Q>dk3!^uRU#D81EK@j2~vgO{?lDi z1sDr3_RT0IZY*{5kEH^e8Stv|k7E~T+4yfpvS+6ZZQzg952k#6P$Ck}v>?O1trA?8P%4Hx2kXffLJM$_}XB(U_LgUh( zWo~Odd({fXjhMh&-J}HgJIYn&GB1T0)lV2=f+S;-lD|R5Nwc-MB#V=>`XE1sc}?L{ zjyn_8pq5Jn?OFZ%C}x#PUwML+O7U$)ZKNQ1FF3AG&SaE=?5;gNjDZpj%Ike!LA86q6>+Pn@5a%arQMI zL}400jDRa%-5Z&v^twbwF!$@ZfG`o zbYw!B4s@^sZy+-Bc!8e!d@auz{v6H7hy1YPubM@RNY`ec2AcLxnr&q@{QH5~*YjcH zRNTm`&@5kq4?5T|W6;TXh7XxfY@3V4Ys$chbU3ZXExp&?xY;Ubi#*k?)8(wc_b{Q7 zmsX>atdqam+v0C|*j&lyuB_kiQ%Sx>LRMT%99FT$kSbk*mNuun_<`vime)ywpIIGv zinps>y+~zW$K;QYsxf*o!}V8NREA6sE(<=(QphDYwpRUMXlcVPh#$zoaz_ge(^6#G zt}epIyVRO3S@fd>aH!;9YmbF?h_&>hK2134@gE#Xe)qkw9G+G>NheUNZvMzG^94WV z!&OxG5V_>rkvra=yT-vcc|)y#wCcA|ur~glw>qS@WrfY@@~{Vl!q=*2deI>t*c5R& zL+|v3^;g|T4y9Yai1wbLADX z(c^!#EqrY`56e9wAcb|U4VjvBMFw6%{Ju9?)|)`SGA4ebaNtIchKzbzpP2@xVi;V>tW9zzEVuoUS};S z;rloXEh&Y6ROcVH_(xp<%7yUVnWmabf8dpV8+fRVuE6<{q(m9}@34)oB&AviP|yE8 zkb(cNk!(L%#SJkdJ-NC)440FQGEF-6=$~snY9*GuQ28$^b#soKZiTq74wpAM*5&9 z-HO0c&A@|Qt)X?j<5{Ktwo!0_2}r`#0x)|HfU+f4eyQFNxxbms-~r3~!J-9ZT^9Y?Yyf05>9(ws(k0Eub1{}x^wH!O zkpR3$4glq4#{aX2F>~ zyE8@MsR%nWRNFIdJ|33xDN_5=%cNS(Hyp~JY&C;q7bGsFb?-pBDmND9%+I)5dh8Zb z5)2~9)?INaLj>VKde_1nUqTp~f2EU@j5U1YsVUL%&M7Pi=JMkD-B^J3_gs6qUwl26 z2AO!5&t=gz_5p%C+_U;;Q+gbUV7ne`h^oVe{>{K@yS#s&AK51pq-vk3{>%{UlwgNbAV37J$=(2W=nOZv=FD!Hd$BFC51jHfXL;C8 zI?bdLtYK}L)DagJ(*Vp-4A}VLDHKYK!hRt`kh@|y>lIC#O8$kSe*)+FgbXzqel7B% zqCtAIA}r~`!j#ZS?WWz6Xmf7xy}E&$o(_c)a7YKX^Y+_HrkM-et90I58-N){V0zxs zNM6S$uLGOPO$xxKG9R$y#s-$$0#(4Kvhl7O*%_^G?fq)nOYiq>IZe#Bvq~b#yFFtp zzp`JcO3o_I1KVMnsKfU6FfAsE?;90F)O&RA%SDfB^ z^W;0q=Irk@XR21XFhrE>LsC^YWS1h>tHV!nmz$Q_a}~F73*2G-(iEzYIU!7dOU&g5+VOs8JuS-9#%zP$5&iz~7KEJ}E&t)# z@S3mfgVMm~C2X~%zeYBpXfj$R()Mv{zPD5uI`enG9sSWy@ClukeY-50$>t6=NxhPi zUkEj&Ur4b8@D-_4zlIs)!|A0AE|uA#N&1wL$h{uu_E$#5r6%EX&Nb}Ni;_#MUx+!F zj$el7t819`p|)o8K~XU$KNXM62hMjl!Yq^Y0BRJkYNy*&}O3|q=;nKOd0FTbh<~7UCktOA| z_$-`OXBKJ-9(aoQ?-j0sM3NK|=G!$E2IeFK(*zWTq;akolIGha*8gGf(8`*>p6176 z`JX4Ql8Avh=!Xp$wHtYM5ilrme-}rMgJLTw=6nOxlU-KK=_1lm%jtpmciFt zzL;U4a{nj-L>1d~{sb;P0{xfQR8)ctrtNw+*j<~oC?$8RDAIdm`7Ky4 z=-tRe&ufEyHja=I_;UBUI;GdulW0bF3Fq63n1{5qG5or7DiJ{hS07q;+%eGCHm&=o z&go^9#kmzRkM+n3z@_hP7Uzz~F8(I}g3AkqL zZQ_1op~PD+T6o34r$lu{PlS&;xisXan94$M%C- z<8(TJ4;AP3=xs}Q(XFYezMX+&UAb`yV#R_eWK8(7Bx=_;FojR zT9Fzrhm$pD8JH&!QYh$6mByPtZLkSjRm1zLs%ff*UdicGB4vk)X{2`L5ByM4II>e` zp4<`SvX|y6QJ$*`aY?%6weti~o)f?@hFQr823$liHO%{vN#ec&gT-qjaP6I+er*u& z3H$PdZa^bCUM?u*#5$TvzGQ8DVPV9^2A~`FEA)Sbm)Wx7rLihCqKedmGXzmL*0wYP zM4>~GH&w;OoIWi2CvRd*fFl4nou%RM=yg)f8$G2R@e*`MzM0)eSA%ueOJxF@HfQR7v1uqUxJVrj*djM=-HF1gXsz9R5;;(G#$#I~rd554csoKqvNWiax$K;3 zs*#iEDtw_kphS=h#d6Q8Cx`R)gE0_1A!{zzYsHMHp%fIgoiWZ@{Y~>soCaHB0d?mS z7J1a=i=%0hf6(rqHDX5eZL-#o{Y!7B;cpEQm2N)Y0{?VIS^6I40l> z_#%%x>u}1>hUL|eT#>limA5D5JS+J6&Z(@!0$+)d@IRzcw>XPWQf~rIaMdIuOV-G4 zrx#`ahA*cW=HZ9Yod2AoqH8EV>1qs|qQYt|`Zfr~&G=d-IUK_z2k;B>3Z&}^@oLTb zA2-PV4y6MB|3Vvi89F4@1%?midSmZyzAZvF_-O$>3boz_Rw<9jtV-K>r+bM67!Afd z^#~(UJ{4e?;EQ)S!qG^`A<+LgqT;t$!I`qfF&sQjOoXF%q9H_V_ErL%vYOh--e5AD zYG>>7G#}4raM`P#ya6{;0EY=wYp4b5RYkjvcWTXB;Q`KgR?^IMX6fFUA@y0UWM$j- zOSgA_;38l>$Ix#`gAkK&ndS!x%4$>#CxI`29ss#{#dFH*(3%!kGww~;^JuA@#r?j2SHNXoUW& zKv1X14Y;?CD?WU9c}@nH^vyrDDSYC4zc>FBz8lj}c^8-_WD z?z`1e*6)kAf8To1E~nQpc`4jZs7^l9U&5v;|J<*xYCYWgawSC&jfj}zRIDC0ANo5; z;J);l*d7fFi(n>TK*)JRKMx3+8odBIe-en=v=OknSx2WduNt zxmRfW3g=b;2o{(DFg|l1fE!5+Pu%eB`(L4|A;7IJBP54O3N&l)Je(AfapBp@3yj@9 z9Ozm$dqa3^-ktR5Gi6HNpWxV#fN3~!2f(Q{41<-00Q3t^AdT^E^A+M7PJEVen79i^ zOhNOwE|iC ztpQQ;`T}BnY+6R`FHg0sOHrS>cf}Q?B6Ou7M~ai=z#+@QL5a3Oln)Ort#kUH>M>E} z>?;%4YcZ7B{%|_;uy@5N>+8cUXxa7UH319AMST9U4D#Gkiv;se`()O+0ZPJEydyQbdBp5;ahMpNo4BKan-?l1Z_?{*U z^m>h4vTt>ju;BjLq@DhH-=oNTxlF5wDB>lL^kANmT6(qBWkC(R+1>e{H*w^Gz^BPr zS3_)!ee{>>v|~gs%d~LnUq5wOkYbT{m6TjJDmL`@xo3cKZo&Q;1Ovx#SKK!3b(hCj z)15yJ@iW3B&EFxiJe$vlF<3e9le@~qj7g*lfOsAIW6{D7`P)2Y*cQ@GVt+8Ds*ByT zCKFc9)uG2Z%G-}mQ0xX{CXd_Ayi}=_r{^h>P z4!C_S1eLnyS{SV89K32q)3*ULNz5IYVSMe!zFSy5dGqONI5{&|SODg>%j;bxcQSGC zEP~U#!pCKH+PD&{7X1m?$BDXx#VD`$tz@lk1)lY3q_y>GSTWBs9^Gm7fo#h?rjuC9 zdUmk+^mBK%Wm7WEDmy}fXLEtGBDa+yp&NJ89i*0gqyFGTCGRth-*RrI}x zE3Z5%3->7Jm^6LT9w(AFJG?m>mYMR~Vv8B0qo^ypLd=@!G=+MXYmjj7*m>w%g zRCk3qoE?D|jKtf#pAYLO*1AESI*E>K!GJvPUok*Fr?~)-pKw?8hI^yt4X3hu!|kcF zEdwyuD;A7`pVWbrmFxy?JE0a(;;%Xv3(BVe{CJu61#NFQWr=wp+K;IdbC{}lhDsh| zghJscmhuU$b4rKD*|pByKc8Tmj?n^)gd~l}#ZiIxpw1ArVc+R7hOtK8Q@O-g9Qf9M z)CN46$Mu_3M1^qAzEeZyq5L#eO{DgnWh(ixGU494E`YVB%*;%_Ve59Xw5GBDR^gmf zZ}|cvAi?}_HVJD?jBoe*+(i)Dj9EOhLnNO2vl&zLPyUez8_pqfUa1&?(`GQG{`f`d ztAM#9AkgiAQ(x3b7*rBog4zFq7OScIk(yu4gNx@k3!4dYoB~yx>7Rls%z@5ckNomh z=E*^*(vX(VCwJrO<@Qf*skJ!7mOpzN?PFFM3^H!yc}ID7 zJ>I-h*j#|_m7MT`N6QkeiXF%*i3G}<_dHF!j!v-;T1p8G8r_6Vy_18OTQvtoggJ7R z9{nI76fT)HeF6II)r>~V;jYbJ(5dn$O%9MImDnWWv+dH_r3alck!JmEkuclY{K#oh zvoJC!xgvzOO)rQv#TY3k$N6PZQK8qw6i4~$Lto0=rz&K@+hr7Q{Pc|^l2IjY8L0Fq z$E3H0Nyd(t@CajFOu}wz_BfsGVGKBBVo=2`97us{Ke|~_`1LIisi+AYd%V}!6hB|v zBjg(L1~L zMvr|K_o879JY?=*e^w(M#f6|=yEU5qc%3=pdETGjB=QZJ14~Fk+n^U`9XVP!NfXHg za_pBp@GP-d0;lDBmSnainXHSf^kfek*`h*2Sb{F2|Jg(V5sywYMoLD;Z+y*dMBI=S z3y#qX*G7hug_{KnuF~thnim#HzFi#@r7txN5fWuJm~QgT+WKfbg{u&aYeusH%@>TM zBl=6f>{U@Gpx_sR*44FB#WWF@=3#|j^KO)1slqYS69ajz zvS*6G*Es?_P-^3U#jvC|KN<-LhK^V(V2GqXnF{7HQ&+Kv#XtS#ez#J-mB{6^a%C^O@9&_7mZ>hpo&DcaC<}#ZUte?6RJ6j~AT{xGYkVai1qTMxTPmVQf zTY+AA2wWyryh3$Cxs+FS(TL9-5<_63QXCGBgM>*_HXrviSbeUg zGH631&N)8W%m`3@2C;lBYkJ!dwfPcv>LWcYqVj%-*~WAnlW^`LI?+)lD_&;|Gb1t< zeBjfX)EAlkndLRdjyekSBGG?;Jw9&n`N!eo#4UcZx6zTw_Ihxa5^Lsrx!@}8oPbqR+7c8hcVYfXSu(eU;mJ>~ zy>BVm>xuLk5;}x0$lNo0a|9fo{3^kw6ysWtrq|+UoP0(ojOO__mZT@GRa>SH_>@N$ ztP12TDEX&gilrLd*3Td2xuM52>bW9GRC-1Q-7YZFDtFBon7T#=jWlIaV-_k{nDDpM zvUJ$!N}5|8NaU@3R+dvHk()1=^5m_GO}2b(w>lhbSS8A2NE|l5xvM2wwd`?MZJQaw&y5XebG5PcCSt*G06 z)n8Rf4A};0^59ABXj`$Ul5d)zf+*4k;|^6P*GjX}$uu=GGV3mVn)iT{O8ibF}(+bgG&)`@&* zEvy7Iu_h8P`I$vo5_oPQBJpLn8bPJEY`|#2(1=XvFI>B2-der);9*i+?uCdwR?(XO zi2Z3XX(b%y8lVKN`AhXvwcVe@uWVMWpTVZ3AieO7DyM4pS zXMcBz9Q_^vy|-e8v7Iaw1tb))?0s3S4GYNUxEFsSxWW{x>}7?Oe%(Bms=(>41r&sL zPxj1IL8o6Ai<_LYZGdQ7(Uczg;K3^rK5h~qftXvpe5g^<;L;2WucZs9kvWjm^5^F_ zyIx<-{j=QUeWe{MIWOtbwUE(qLG8Tab&LBSKb*T{h^kQrwBb;*e0YFv`m_<|o|Z9} zI1m_qBWLr&qTLzIYNAo!Rbs>xRZCG`j1h`0DbZN0e?IkT-~yB%YFqMfEegi)c_6p1 zTb=tWw!H_gu}x6<8w&Y2(SY+1@JJ3T^qhbykk9_gI%y8LQX`$7gED>@!rqqcc}~c^ z2@Gx85$fA7KzQT&6@~Ci?yRqlV3!~;tjPxcmUc2@av@eMYCB|H0kv zxE;L2?jkGvobcC|DBu%0JcQZZ5+|+I-BtMTF>2Yx&1a>yEWQgCi3;mO8B9|m2c*Ly zK{GWO%DEoT26b3GVTiZRH*|iQ4n%&9`=}h5_O(nrMC2-Wt|m4L_EC$)f>U(XPyP-b z1*zY!4w+lxY8>*e3LL>Wpp8#~2U;F#aYg1FfiN&J3`4uWQ#5l5`ocd zM#F=dXv#_mDR2OTFg}pBklm_bV3zH=-(8k&K*q>EqU7OeUXyrTy~MW`YlhOc`;?oA zC3rmy>W4*nQQZzD;?}5Iy=Q`PXl0{3yP?1R9BxQEteD}Q3r7626n=Mow=sq>5ek8& zi9GE32XoI^&PbI2|*AgfB9GPjEqSn;0>b=7vG;UE6J5+!S_+)LJ^*BKkS~1 zSC-ITL#K28^qqaXCb04x8)%5j1`gMy2%ZMj?Po@Mt&G?RZ8c3)X&uLeSCFOGGgN>@ zz<7OF!b92_=a*UGeVw+UXNB8LlMb>g<^}U0OTY1YDKL=x3&<7P*GUI*FEdR9$nYts z9+P%ldnBcpRJzhyNmp9>EQ%(zWIJUY-is04w+-~_IljMiYH$FMD%xXyv+F1TsoIMrjt&I_x{f#=(l|8U>^|AI+(rd&)lp|pRCjT{b(GKx07a05>4Yr zMwG!0wV%v4M~~1RsFG2ZDAMA89xqFFq9e(G>shuG|C3WYfXGA%1hB7&V3f&KS-7g z?gz1QP*fgdLgLRV-p{Z~cCA_tVw=WlDqE4KK5??D5)$Ca@j(c$7(`$UNM&HIC;Rfu z!BF&Rf6)T|03X&^qj7;~g#Rekv!N?(Xuc6!(D~8V8>}EW%!(^K^17vS=pkA%W2s^+F%@5yWTr61;?|LpzCoREyeni&<7-SekRH5Q}tDx-DL%t zD&@oiTC!FgQjAk`11LI5ebLc*jh|y0CBv{%ZpEYv-7t(uusFs1Y?FQDze9P1Xy?+^ z$7qxdp)Fo+w6c6F7qF>{=EGX4QAV(e-R4)u;MrF6$7r?Z zGec9sc+X5-^N8BZBno-5&U1|{*m6+xDltcvWVx*mS~6|>^@ZmQI|b{5JBJ8e31KdS z-EEC>2WVGSKhc4vb!Jn=+Kv8zsaW4hQe8jphVh@DMIW&DCweP#(HvNBy$8nu{<~=E*(p*{39 zj9)P@l38J48~b&YU}WBg8BCNW^+|+B*wSQH%`VKQTf4NMi) zBuo;v(i~{EWa$1H6$QS#_olNx#8?uwOmhYZm}FWRo6A)lsu6s&>#!% z4k5BuO&<+Qzst*)MlwfmP>pOtkTBQ#qOsYO6;C8^6B(PdDim)eM$t{lwR7{WL^xC`JcZ0zKt7F7Aujp__0gB`dJQ=rY@&Vt-1O~N25t~k zKuM6^jtT|Ps1tC5&@$eKvNNx%L}ilyZxN9%HRlhO;Zy9)0f6My81kK#gqausd$FQo zHEYPkn1zC%%3g%OyMioxs746W%J&L9()hqCSSea*3<($@+=pmyVU#@U+ zY$*lXyutY3u6{x8H4+Qmr*d1IOhYU$J9~5KEjf!Ockoy6h8~xvbx&dBkLiHAJPWF= zVwMtGUk9R?qu$BY^0|uy2yw624`BeuRk(mi5%^XHKW(%&H!stgYRx!)7Zkjqwa+zl z&w78!p+vP|)u$EV1tk$CmAs`DnkI3YiUkCLPr(bsW(_c|Q0@aol5B$heOUEm>D zF$S#!A#rkJ1KUTKDK}dC@1;u}(S}REP)5or3}yiq?K|4Sd=yo_D8#TJl_xHvJKAak z2Iy}+Eo0lucjU?hh;pCrSw34KSc+pU{6T=ah^!#0!*SHL)#>BlTexIc4{e&-+k2at zV@Jrw2(bwEvWJ(mMF)%_iz&zr%9S19BlYUpsPo(q1GM#`8oa7S%aH8~3i2Q((@H|6 zkHMr%QlH(+%{k!m)bkjjA5ZKdmN;)Jl9}gg^r<$w!Yy= z(kl&&4XV=}jfWW#C+TJU=(~5*8QEd zHf$I6t_FrC6T@%bt!qA&rd@x+!dgPsc0trjMuAf*MJo*I{>GRF1S=#5y1ewsrvVYS z%Y(QKF?!`dye=sq2tDkzl0!REhiRP0%w9kY+Q1m`N?7E{r3qpmdJ7pkIEgvkxZ^iGLZh?xz4TjhJ+3n>Ml4veO z07=IKEi@1jlrm~!P+k=f7C1NiVD)A+W&8-$fLxvui=ZNXEx*{sKxmhtA(@Zido zo_mg*cM4|sw${-1tl%Q9b#}G~m0MrCw_-W&q@Y=Elwjbt1fn$4G3dw3QWk`*_G4rC zB&ZKFq9^EdVfXdDh-Z9NMr#w266hm=4&T;f0V%}c%Wdb=VgSNzJV*rU)KZ`0Rnfc?u91X!|>5&TwnOW z)XN5{y2&45%8t-(D3H)*aPzyS8qQ)5s=3J%;{wb)omZwkz%2U`bF!TNg`q=j{lI-d`g7cwG$ahA%%xF=Rwz6hY#h#7*b6ER zZs3-8vl$}*mzjRZDAf#2<&?^Hc7GUBBD+T1-VswGnPX0sETfI@(rE^?3tnTOki3b6 z=$vMOQ>ufBeflJW*jF^Z-yT!)koA*IAyMV=2V3&Ky)hQ9shmLxV@|Q}3_IVtG=70# z(;z)ir-l3O+u4MPnT3juCRjd+*|-U{A98PbWs9hLmPt( zy*ubbdkow5R{7Uo50oH}>NIS6#lTBGRgVf%_VkfnL*+u`R_6i-F@c{^k|&8Bq*~?h zy^3O{6}poG-DC68ABcw$GMN%RP+{8@Q;RsDUEX0+^zRv@5_zf-K-simP)rctmzBvF z;Y5IN!!aqo$dxmIYv_y`T7%o5aA$@C8h3*OqQ89-3+yibRKy`#!r0s*@W6RM_T_ z0pNUgsGba7&cqgu#HUX=ytDEOHtp|oZWQXadH-UyUxReL^81d|0vHc7=v$!4!D&>@ z-wHJIamhVd zL9aqZ_Yxd>lqXR_=$d0d#>^BHOVrbBMTI9ROa1EEcohi4mld>hoHH#j@dfEx$8#w* zT8X-K86rEZV3u>)%K65s6;|w=NH$R9@x04U5RQzcUJhPjVFe-7G6OUShG2%mbDHpy zRE#w;3duIlN$*-Kr`3E&#WYs$=Z_VmznCwu1>2$@D1N{M$$g!j_XBw%h99U8d_Yw7 zTN#kIJ^APh!|VMQIvI`#1}qL)_Yw#lsn#iu4$NC%)TJO5>nxZ-_`%+ni_a(y`3(=k zNTYPe4K7w)%!Q1LHO?uAG4;ukv8bX`M5AhRL`>w&E*NpKv8ElsV3gy+Q}yb`*DE1G za~sm|@=3f8E5{`8EU_ek9{BqM5_@zDtk}{_aUXx~A?fUJu0yKN!S{WTY8MsxymsU} z8Z6aQTN5IZmu`GyD55$e{rP##O0#gNU?T*J0fd)tFC50(7|VOK`~uM1^Bc2lpwo)< zGua)oR3m2g@(F>{ogZF!p~fN@pbsA5h{~A+Fmm<^A%c0b#$^oYPb~G~dWuK*W12Kg zHE#%cF5}^C`76@Rz$rgqeFV;3C>yxbeOP=J_Zx8a)Qf-2Wr4DcM5e^)7n9Kv*Pt}N zA+Mn#l_>y$&S~Nh7S=Udm#igCIurvgL`{2~q!aTgbW7G1Y}pkZ7oW;aH?t(lxg6BH z{`Mzs1YA?XA-E1GE; zHQg<3(SQ=LD61-(OO-X%tY7t*O#h??)L2*yl!z<`=uwiS0K{IFL}z&WLGyyYE7W?| zsw!42JO1nU2$ z=uw&TA-;r)qEdq}hQWFCD;g^Nu9~8_`rEw7hw2&VI4I8{R3UPU&-4Wz+#tOj(C|n{ z?)m&j)ua(a@sCqVePH$CqI#}tVS4hR=`h+@z1dTEV77G zWRLWulsf~PCx<=agu*jQW~kmCFZv9p$y?2WZK_C72P5Z|+AehNulf+UWB?L{* z5Z&*+2T6AGrNBA;=z;5wy5n`hKKl^-E5^qehVO!GcSa=Y4$%kWj5Y0wZj*XjygLJE zdst_b=Tw`Dp8qB8xJ|dIINkm%-TgT@$A>+52*@-rd#2kAJ({Dx*t|5^9PqDf<-6E~ z1^`$L^Ok0F4nn!v1*r-j0`H`pV(C>%UycOLuABlFOJ5$P5Yw7V$CR|_mR&J#FlJkn?8yo+&t937 z%K#I{?3EeM`tN0I1&1IPaCU{J%`3C~Rq}J25Gj-RntF!A_C7b|_E+1cls;!=>@*vv zC^r;Uzh9(hd@3Z*x_R@l=WP?s`kEG3N79N z|A|VxqQ?8-Jp3gCU4>spovs>!Fy|#6+Iy5wvReV{C_@U1bH|HqxdiO6_ur?Cs6FWO0`jBy9bc{J zHG3b?cvFhOmzJ&#StN1w8KD!qHn}614wF(pmEujCS%|FNU~@8N?s?Z?et^3nk3I<2 zZue@f$X|Q6c1X0ozN8>*e_4l`fKGw(j2f_5^jclRxiv_^nN?9APRD|Cn1jG7%d{@~ zpP1o9SXp>$r*Ehf5Ep)m3-==`qyy#-NH-1+f(X>$dDwB7NY$yymctQ59;gQp)x3Ly zsx|dL+HZ&fjp8{Y@g9WaIiqOMK+MNFKRXuvKqrNFSTtB3HZEb*+UHo{D5lkj%|Ryi zp)d&Q<|6*P#EHy;9#)JkCO(~FQC>AcrnWF)`bUBlk2huM?_|;kZ25`JRwK^Sfhj{a zc*o&fYyp%#sqD2hMtN6>S$WuWaAmGJ=)%il+A;1HB=r=Wm)gtLNl!r{=E@7Z**fFK z3rjZ}myT@8mE_d03zZV(5n4>lFV*SdK@<`qS)wR5`%O%$)4n?bwvd#{2>J)D4$LP{ zBtt)ttk)JWWw^jNc+41*EIIn<&-?2J9BlorixCrUn@&wLBF9UO%c)R`wWAbQdOu8D zGasA0mL*1BMg6cf^SVUk{h!J;N~w50-FO26NHCiG?F)kmM2P89yO~Zop<6&+To{z2 zSwWWe$3?O3;ggYP)k?{?-tH)6|7ninQ<&uRMJ0dqZhJ?vtlZXqt52;dnsN|Cu;e@W zaIvJS!ScM4Z)g?VSevc9q4ACpXy+2Gqg{(u2d{MhrZMVm#00EEmUk@-*4Zllxu52? z(UCEk&(i8nQ{HdUL{>#nT8EfNd5fb3m9FJ3r@{dVFU4vHJ7&~T^GIth<&CFLO71?e1i?sjGoZG{ z(e*)&p;mKUysJUKFEfxLt?D4wS!8LU*A*&>B&2jF;*Qh(Cr6JH@C7hG@Ksqk2vj|w zTn<`^2l`ehnowBDE5XRq(1;Dk=W^LZMXd_k1v&dAZ6rs1I>pdc2ZAg5(R|pD>8AeNPI0fMW+w_yK!_^6?F$wo9$DYsPvSYc)%Fg$!>E;&z)VS+w{ zYU;dpqMoi$IJNv8_(rN11PNo3j&PzELB8+3F7=MuWq89+#03aaRu zAKl5r95<>0P2-4fl=>Cefgy&9(5ZcBx-6hYAFZaOSi2MEz>H2073vi1S<6*Tav#I7 z){WXGp*mV<1pm17+t@>ccMLSNHJeKzqO(Ve%&5=AOSWd6QlZu;ZdaFIFT8T zh@FT|0sp5d^lqesyEz__8ZxU4LH*qPmZ++CUks8954%i`8cJ$RF`RDy2E;+t4b{Pq z`i?3#uYUm-7RnLkdx7=ebtqTauq|NmM12-{&QsMy{p|^6MJOSTc4iW{!N@~GZ6Pat1l^EuGbWpe-aL^iz zLB_Hp#z8hblzVHb3~uoo4c3C>renFn-F@Vs#-PfdsIXx$auyP0ffI%CmKf7-C}z+N z#aq@2!C}!E)3a~jLongzX%*W&l_E-LfMu0o(njy1$`CkEb=#&Lalk;zfb}YQ;~L~c zEEGIc?1El2>cXC3bQHn-v>sSs1J6fWqzG(u-n!1QJ&v-b+VFpFDZsuW_g1`iTnNw2fmadK@F0Z54b3LlalB%oLb-xmOd+We^4 zxeO0!PKTw4so6-7AXeu3y}LJgn6kq*rf&Uy6oHE4P?(mWKqG5RD2mtZa~Y{w9geWc zUxhuylk^0``I2RPHr!J0sRr7!Ub-Dha_F$(R`Cb$ohoGjSNm*mtJ z;kr;ford}ABP0OA!pu)en|>PI#~h7EfS_vIIqVo4Po>H`I-9;n%!};MYRVNPd7OE9 zrtY-(Zn6?ST|5sNa%g)fi8K)u{pj{PHAGBr$m=c0w-Rxf=2Nbt>HH+MHyEZsCk*0K znTsz1IcScop32%KPF&ercRwu5W>F<dH5Jwd14AKm#P`+;d?#RTTv!9t~HY& z{HzE0-EWmWWZp?D#;aY!4lz>`rfqO+qM&xqME7YJ?2B~{3XGTaA0H0k z=(~?#firPY!_C$g7~c#$8)zypPL^-s{wT*6G@4OHCux!r_hx zFsQcTHe!rBc7D@^(88#dZyW>tHx7*M-&$QR!YpFBx&l-Kg_XCNBrUEAsz#`MiOwMX z3QEPV5aj5uLmSD7?YMnJp`9VRV&%6HF#4PF{{5DO9(K4F~T;=u-O z^#k?#5;FdgsK9@w0SUGEJ{t41)r5ys#KP&FcQf?sm}`+aN`KzhFBDR^t($;NUhsu zf4J0S_L{H`OsDD(FR$iz>Cc+U)otArA7-Kaof4Cw^jUVwh!XKX9YDg^0)^IR8efto zzZUT4CE};Q!E-N6r0nK6=Y}{4U!WC?jm(MaKyIdXNLBs@zqw zbgSB#~!y4DYZJesql-=ZC{w z^v^?MO!F4dxZ=q>w~FnFJ)=}4cze7V=u$&_GvJ+*O{z?>If>gQzaAB{P+}#C>_{;+ zmir6W=hPTa3@+#{LsYJ>pB(nFs9dx?c#Yf;y-Ee_0`pl^7pzhLU#QUh+ZZ{`_71xC zGyyv}5%Te$xrK2vxjjDHqkHB)YgnV7@-|dkCFgK0H8Q^qd#| z^R@H(XpX$5z|#1|bRuBLEKU=Rp!pU$I&kO&{V;y6Y)+D+h z*7X)tB98_R9;8+$XgU^YlU{N!)h_Fu___xJ5Ul+*k}xxh`zx*~6yw=K1fJZ)x;u%&^GQw@i=nwdy3A@0{*G?ZU9Y=@jUURY~U;Z z;1tZ<*DQdxGzPy4Kd*gs?CT2=uBTTeKQo;gONbV(ce=MoZ@AiTapzgSIs|GVOtW_9 z?Wb=Bt-xEk$B!FKoR8S_osSrbE%a^XYI_9_VORc@88az1;0oYEsfcqj$q{z_4cK7m zJ_Nw*018^xRmm%CiM@m1492@$rdP=aY#nhDAX>rAm{!tt1hG4sQP_ScAW65wx_`C6 z((RdyXz@rx6U(9h$C&N;2rm@8%!f4*r z&heQ0uK@mchKpfbPLqL0Cn?^-`Ad={|J0R(~SWP z-V6E`SSa<2R4KYXt$0}j->O@|!!&rCHPUpA=T@v-QQ>^{N%Ab+dd!k$I}@+6&Wlu` z#+914XDt;2-*Q?58_cCwqa6^(z)2Lo%~q+fBRM?XG;*gs}V1}DwNZ^+(Nq1up9xRuISIvgVN2%&{4djcln*i-ZY6M|wJ zpdn!uf-^dpUcbqA5Ge%eH6WzU+g}(S=4%awQ?426a8FBAa7lQuL%vz8W-=C09jASo zA+9;1GleiHeS`ko4`*%uWzRw5X{X8WhI|-#MFpt>wI&yKiczrz4>~O>h?4_T?4WwD z-tuu!@ZCpfh{W?abOH#rO!(-u(ktD!dCL z%>>#ad$)b5bHKP%CTx*Nub!ux&T!kyf~N2~;oCsUg^#ZXHUba{`*?|KjQ|!{X?gE>L)87+iw|ch}$!gA)h@cXxNU86bo}aCdii*WeHc z!98fOpuqxxoZ)_-@4L=*e$c(Ec6B$?y?aa5TGa&|>O#gH5#|2h-)if|x)!hj4ibQ} zG4^4!8Sqz$XiqJ>3aOjbsHJ7_SF1v6oKvbN?*5{Tr1S3UE%&nrE30xgG2OV@2M#x5 z%4*a7Or#W41%Xd->rhE-*Vcl7cVp~d zmn=1gUOZC(Y|>mWev#G>WRAJDn}_iw(E1D`InazgL}4z<#9|SWR!5S(ujbdq69VZu z)ibz%ZCo`~-ea<9c{xDMMou=iSevw3Z*(CRDCqI#YQwwbd)%1M+QJCj_28sKY8FYx z;tkp9I(-@J=z7<@i$ZZ{^rro4IrQ+5q2n8A0r`5S-2ICVI}Yvwr;&BzRXvdgkA4}p zZJ#k@q@CikfU;5UdfEB!2V1Z4mM=hT|Jdf-UWd5nh9pq;Acj~?M>d!7`56G)eP9BT z?%{*%NWO2)Gbt0(e@4*#yr+&73RW;zfs1o+@rpXKBT&Jd11_Gx#RqC=q^gB~u_YE) zl%lg>0@$)bl?vvJ4`jM3FJVU((nZAp03RZn4=$-s{Q?!bkTVe}W{tl@G^gEDpN3ml z4jW72$I1}|oEr-6X#MJG0>S@~E0LJwekMP!3YE}^X-Y1vQxrAcO^2W7)TA`PBVT4Y z$6vS_%{N>#svHR*+fX9C*4p50_;w%!u6G^3M)s`|3t1`>WY{&C<|39bT%><^4Ukq})k5j<_%WOD*mW z>0D7hk`7dVz@ZfSwvkzOK`n01^Rl)!|A&*eEHNY>O>-AwF4w{QYH(7yFx}pHb-3LF zo&IP39L5B!xl<-1TljNIPD`Ew+{5a>1?vvUt&j>`NA2?rWEr6`w&XTiiAMQfB?EZBZLyE-z)$s1L!5d zmA~y>Upc!sq9x7Nna5jo?Urq7HsYZ)X}^i+V{-Cw<&b9Qr@Z4Z#Muv&D2`HQL@@E0 z#)+~);rTMFl=l&3uUwsuxoEb_R_qzYq zPBpHvrhI-fD~XlD*~fjDayiE^hZf5Bj#1|T2WxJ8L8#Tj)!hs0!8U-#%6dPll|ajy zqRy6-+sgX+MG!X%;HT;nGzySwb}GC&TIDHpVoS*=|B6uN@QoC{Qpv6rTPjys%6$sK zeTC%DB>Ev_OJJOTOw~@y&U;`NK3`A>|Fv=R*=j-2QUnl37Ay~7Y-BZsCjF`NiKqZw zZY#V6gP^h|II+o8R8APFV(lg1Y1}DwoVa8hDty$)5;~txHYBiOFyNJ%D@t23{uX!= ziHaErVLC;Y?sKFfKn7HGN|3v1U0uWH2|PR}d2BN1lq_ zgn6rF2pSof>K*l9qV#)ns?V|%%WpT={T3gyg9)`K!K@7B|Hz)O zd*UL+>vW76F>o)G$T9iow2fs0fy1RnH=}AWp))!&QGEvRTdufNRLR8IA}gtQ-do!Y z9J))f7j+8Mr&A{JOWs@gbpVlUwMf$+#c@2LXNvFgI95|E8PdP(TG-((#ut|QAUXJ zxY?+QbKc2A>wXkq!S}RT=~vV8h(npt4$|I5=m;w64OO!CLo%$6JB62mJJY)s-^N#p8_@xZ*S9b0) zel6)U#=-&t3;uldYL+>I;4!8~mGyUy_(4A@2KEt4&~W;%*P0*1FtA!mAC*smMvjAhQh6lC}Wus zHkGkpzzi=5oVAeDv?e!*_z>$dWlDmHfbKTam_-5M7l@)LCxHa*-;VnKDJC_}--DGO zTWFT5(E%ps8S|ND*PlXA($l}f;~$!6?B7yO8QMd<0SlXa6hT%ZglGSUl_^g()R8fU z{yuwP3N=j7ch7mP26ySU>d=0+_1PdtRlweI3=@Dyj5c+omL`AmtJiH)Ai4%^sSz(F zlhJ!9@2Dv`ucpv=#L&pzbjT$r>aE7-s@L%sm*F>J9x)R*OZ(@&;E=wnpx8MftmXZ_ zI5O#Xd)$P#hluz8gcnpaPlb`=Oah=e*`s*3Htdhn&&##A$t}o1Df!iWn3Z6w8ZNag zGN0B3nTfyl^Mb&A?Tw1EWPma*s2vCgy zCPe-f!2I2O|01q_su9APej@{;e7C7cF)My51;hp(psbVEBD9C6G?j9SU^SDz3&FQ_ z6s5=gYIraj%^SJ3f(DpkMO&dK?ri6RRlwW~0Fs!mJHry!kOLi}90@Zy%^$hgoXgP! zu{bw)Wza7OWXK3nFb-8OxuBTUDs1Mt2JD%`qHX>HpZ%QqZrm3?iDRC*b>aj9Rk?Ce zAX*tu@r+668I&i2I%ZzB>ht4vhxK1U_;1>AV1HfU-Kv*7eN*e0YF~OwVw^@QJGBUl z#$eIoG^@sEx?Y_mK|VgM9adq)X8pI`X?j_uAb+tw-M(63+UIn^0VtSCaZhB-41|Mr z$N<<5sRVL&uh-BknA>{_uc0GSER>I^u|XQOFY+Ur$M;IXP_^hydU#BAle$SHF+m0n zgi5AUmwp2%Opz&^u!2Os7yhX8#zwQ0-wNa6m-X?xaF`G>Pm7cV!C8K@bMHu3tTsIzPSj{NDMrWdqY?}fL!?E0hM6Omvv{qQ@1CfV;I`89br zim(z!4OL0_yUS9JGRky3OsM(6Lhi;Kon?os+rI^o;4|!lnjuinhkpE0aqBvZ0gCfA=)g9zM5|w=K_ngkL zH4zEc)^0r(ehaDF!Ka+Vm#ubo1OPSg-z&|g<_{6;<@;*!$^BPV(KYXG)X;Ug8Gn2) z;NtfGa`IXhdVf7f^7N;_WHN1-3BbnQ6By$nm`?#&%of&=MT$baSDQ7@7f8iT;?FT< zh_~{9c64_)CDV0LB$W((I1_;TD;K-pr{bbV_y0G<#wO@0{wkNVW^T~nW>Jb9zmhXG zUqlCVV%ms49Frkr*M5iaTyy`6i?QN~3`AGL*sR@nd_QQsi9QVfcE7vm<&jmC6?GQZ7f4 zatZrQ>y*n!p8Om9Yg|IFR5$qjYV~=%QGus`$~9{t21cAeN6uOM>Dgd7CeYShia+eE zH6w2P?MsNC;ovIhUE7rJI~C9lyN)W9#2?kL6PN(^Civo?F=+zM_8XBmT&e?Wbz%Wp}321Y56u8{D|-q&36~3$K>rZI4QdV=^see5)4kpKNgY z&sq4R>E6&mPWHeOhmS;1`BMm`?(P$c~E9ifP!W*?yJACR3?kGiZpNeTFeTYAaENOd8AtoHQIex%#^WUCU zB8El~Jy-7444HULq58f0Hxk+SzdGiU1^mXxP!LrX4r4<}afYa*zXp}rp)7#{$O;S9 z%W39Z2gY}rvu7V$VJo8)@#|IKsQa`aZ7`6HKGl;Ph${&Gh)4sc*YMR6P~Q=7l;M-J z5O$08b{C@mUh8dQsi@Y~i~!6lPL{I}E^IeT*Ib{FYks}Ehv;1W4N=P7YuzV0s7S2rO%UrpARnuxUO;-*aVg5T^}it8 zgutazOL!?`$Zqm$h+&XwJlXSOt+uP4ZkYW$&usrE^IA+ffhZv*R5>751uDYjZ7c<$ z*ldY$CM2B(;C=Yl>{?VymLd*f3WdnYLZ9E@VE-EeWdK`#R+wfI4BZxR3B3?2iUjcm~0Zzw$%0n0UeTH=v;O3lIml#?nnMYzy`xXa%x)Q>6;KR z(~6h|H;9RhUdIMkK()?}a>kwdYd`_cOjqj9U zRO50_5vbYbl7^~qVOI0OTr31dBsz& zrA?N@VU$X$-7~cYPfsB^NqwDgE+2lle{wXtQYXb9{l)Li$i1mvLuVm%R!+)ZVk_-R zgBdK2`l}<5S7!a}@bBJh02hVhon2J_F-j?~Q2;d&LD2ldb^>?$1^228#fd}hhm`rH zpm%Kh7(O|^^_Jz`>W>!W4)^X`VF?|TGda1=l^U>F5nyVc{G2o1S9?jN-))@kU4KIn z`sOMyZoidnAf-J0Hfxi#`WLwDq`I<3;Z4fa?~H)0iTO*!tP8V$Y$}EGMh17G{1-n} z{^qTgm>ATgTUPu1x7RL%sTgVo}@5BSv`Btxm1eF`E{ z6Itm{qyUxrR=DW6-~wgLXuRD^EC;cp1Iq4I!n?Ociql<<71?(zsMdsw6>e zph(B|11@TZImw2IbVn!+>$jbcP$0yX5uLAKuO1qiMgj)JVs_|$BPl;X6G7G60{NF# zv3L4t1Ipibo|&vh%=x43t^XXOVX4Hn{~9o80&!1rJXlE$m+3%C|3(GiO$-hozbPd6I})A$cVzGF%gR?6 zFgfBrGpw5syhK#yLHtU^KL|^1SYF3>&74q5=cjMWupMoADt@Goh(FQ$F=YM!Bnu*3 z*syEOo~!MDYFoSWsn$sNMEW;PdXw~sRX~ThQj^)B*px{IP(D-ki+m=nySd{s5+MyD zRTd+ra)327$lpncNZwhJtI_meD`?)bq@Js`( z{jDdH3>$-JK`8OdVlB|d+w`$b7ci^G_~BuEbt$gB^miJ{$yJv?j6bs7vhzJ*FxR-K z;-Ga(1xRn%2Y!{Em6V`ZgPI>F)LpG9SnEB7fYmErSFuHjx7k27E|Z?Qsc*u)3nJV& z1Y2~qbvP=Fv*Iz%BvkqNpKi@iFDIcq*NJ3E3Sq$S7}XE`#E0B0YN>SMv#&xH9K!0f z*eQj{29rXZLoNX%*|-LQ^S}zvE<7Y53DJ0wOB9nhMWQ(WZZhmT&(pY|^}+puxKkY&*c^)0KbOIwhwuSk91vMN;im$tpWqad=5UE;b%K75vYW}r zIkK{9-v6O>={9D%BCwzuT3LOIJ z04`yxQ|$ZG0LguvtG|p63b;N|QQHZ`H#WPeU1A!#Fv2$iOk5v~{xQKzqs;J4T%~{e zTIY$q7PgOpPf-2wwlnmk)z?jmIESY$|<<61i0IhdPJHyBBjPoz{{q?z0 zWEi2Y)tH&W^Wa9|Qnk&JpVI=tCn};dG5}O3?@E;|_a zkM+EA*Luk+KDO7Ry@u#~P>u4Xsz5jYu=ED%8eI9=QA1Rmvsj|8p4lvr(R7vcZd%A# zQ{EJi%<8iN#U^-_P+O0ndCOEu<@gvn$VY6TKDVWgMt71sOGv?onGB=`EP;3*Xn>V_ z!QHI*OlG@k1(5zCseuw-Rh=&H6?%WoDD9a^}e9+fvduoDL_WiV(faw9Z02fbx7)`ZrCx$ytNVm2yI{%KB^&>MzpLA2E! ztysZJ2#*zdNW1`l3_Ib#pAvNE_Qds_Uc*_lb;Gxym@K2W9d0MoZ-t!^>1#%7I_N+` z%n9?CS(tUh>SNtUIii8IyI72Y$<+=^~^t7khfpYBx4_-`8HJg;Tub8+NKN_1l(Lbqzq~IB`zQ9;2PAV za#~PqJY(`It>a8{sYTE`qa2u44B`rq8S};CO0T>6E}*CmVJ5_N*+!DmP{x0^G>sdQ zx928aroE)jW*b)7wh&o6lMcszaOAE>hNfw@Itn>p)vY4!y?&x2?ZB9GLs_D-H&yV% z+9m-lal*3!d~k5d-#kx`aGk>Tq4?7Bv>%nRBXhVxH~l5{EidtMQ{yj{q!3K}%%W5S zt9Pc2*f)*{S_CF~s}bWXxn$0?a4cAUX0si95SpR>)jCi;a|(}oZj#M9Xs+xz+DKE0 z&j_XGQ@?N12<=lC5B}r!XwPle$=$`5KD0Rnhrg72Z6iA1c&H+OEv zgk0~75XwxrXJA#(-NXW%uwJ3eK)uz0^gEa?6&@pn#=VBd-4w9T6%{}2D>7gp9mRBa z;?%`wrk-sPSfs)689okdL=Xxb0PO?RzrE#*=m1%zDfY;RL$v!~(tynbWoLYVnfaF= zS2F4`$FJ!%Bz^elYaL2s*&i^|SCJ9zuCzbFd-I+};G0O4j;VsDSQgxwyuoB7j**g9Qhlm?7KQjSBpWWvGZ#kQVBtmdg>1nB5 zK53{o+DFbPHR{5Vj*aoczT4>}Ayz)P%TfR_e=uD^#h?e58G`#n*j_R28=@_F$+Oks zn{wSU$B+>iZ!03|20CJ+0cL$TkmG&v!IQq>6&3ZQ6;z=f3Lz)2k$>N>L<2eT{L_eU zq^)PBl)z3I^A+2+oNCZ$QdJ=>8WldH>Hn38nU;EdLTHN||CMCMwK(c;R=v8p20G~%t%L&J@P1$YMb1yLC za}GBX3V5l-Wx(!ag)<=k~zyY z46=Y*GwYQ(G0B#6PRGC~9{@`E!m`~kY&{Mr7Gpj6&TMP?2dSQ~NgeA|HAESV9)1Xc z&}paX0KTt-vqV7%?u>!y5ibH?_Sb#PF;11A?sXptd=Z=wexg0z3sMMXO#YV~ggdQH zE$8e0Q%K?mSMIbYL)qz(8is?~ks*qn@s294$c@^#LK2=wq|zA;;BYdZ2^=mD^}`!B zoD2=*d?bj8ktx?* z*#Cm^#MeKu-2V^UvHaZ8aX`mhu$`HuMz1rxUgG@!3(9Mn|6A|LZp)<;UU~|3Ve+XArG=Y>Vp|{i4Oo7@ZaNu#^x=6hDI`o<7~Euw-N#iUGSNAnQFzM;Yk12i6S#>u!L`Whg}b_F($LpzXK?Gw#Lw-Ydo zd~C-~R!GRgjb!h5n{1n$-W)G>z2K8Qlp@s! z=Yq#kAz}Vw-{A>FThbk)VG#j8a_TM;pz5TZ^tebTTsm`X0#h@ROkXirJq&*IaK* z0;x*QKcYttG=JMb20;{msEp%68;Y(^>2TxWJU@;hwFmD4l=8dTR^qtXwl6RMa}YrH zsI2wfbj>x_Ue14a*ooGPz(t2Q5(GKS-4#DpBl?w=h2$r+0cs9t_jSo9F}^~k>35^# zqesN6zY>cCUk9u%QCIGW+ZUiP-OVOS=wiO1L70NG$>_yvvQNIELNRY;wswdf6ZxbY zI{*$*EE`K7v+-{zaVWM4hDg@c$4O8cWI+0#6=e>7?&XtKTZec8_;kLung(pTP(9b8 zw@pW5okghtKORd;Oce8;q>)x4iy2Da)Q9-N3U2>!Cm_(H9Et+cHwf);8S6Q!ZWPL@ zP5qP`ZXVUri+OgRpjX!C$f)swlo`11Lg`F1N)*{^Qes5<=sr{=zcaLm5}~D6(ozIz zrxG!{pjO)MBP1^%5eTGRnnoDaUlJs|xO=M=4Uyz|>WAM?(8{e1OO z>~LRdOtEPrnuvmrp(twx`vhzs8$$t6kGebGGwIbWZH*jKmlLV&YGe!5gfBk#_f9u^ zmZww%eumPk*1X#{VB5FfkJ$y5UIoF&POQ=^uOj;w?OO*6783!T7`Wm7ti!wgEGLqk z)t1q&Cc96nC8hf;aGH+X4%{bks;|G|R8j_!v!5lH_1EN&0WaUo-MUqCFf(3cohB$k z1R-p9hV)r-QgBq$Ed3EUI7ykd;3en+|EzEMHC(W(zD8BhCsH^nb8fb^DtQm--e=(} zs$gXe!mj@%4(}3lj~>&0YyTeHpE{C=Z-d9l)d0@8vR3VOujzLQ73UKT^h?I7-!LuM z49hbsIV3RO*t0kO$1_6w)Y><&Cm)2+YV^3LM!!}Ybmc?$vQ1-zZ=qL)^mDa6;0&X= z+8~5K0Cy;bC8BbdH^_EM`6LQgMzONM424E#;Q}8qVaQ$=jKCTM+IwAnt-(Vk6_OHc z|Iv%7JjMd3{qP>1ooYbwM+{5jY#H{RskLRv`A?Q88XhNcMaz=BcUjn`IP1rJ8KvZ^ zBe>0mCCH|k-f(Ck0LmQ1+J#6{gnEuyI6kaa6jf>`FX_#K!7G;pYI(tCbaFVtV+*sK zmbHae5s}r`MMsE|bFqpNnP;#5Hv+Ld*$Qj^DpAIuW5+0l*M~}~OAYb`@gy6Qb?6LFhrVd}407Fp|X$qI2+aYa43wPxvghh}Aw z-k0oBuk)t>cV>b0Lvzv(*rtDmG|ZLUh`o4dRH+}6F*y&}S4lw#4t$8Z!EfH}_|v&U zuiReSDB{nxi4770tk~h$4t>#!a&^ENb2={5vGaEAhCkqhWWwJZoyR%WGp9oC#`IqPl*!kOv62@4513{aE?D3T*6dqdnTSRdp znci;ftk2`DOtn^n$o0@S_5DEQ9RNY^-h?qt&P4tDeE5iD6!kUqG@ZlBZovCpnpCT) zNU741K|T3gi7v--?2)?hYsXPf=CLOC62<$_QxJzN^u>;Q0B(oyI3&aIdBy=hG!`YQ{i6RxK<#e;29J`c~5 zd=@w-<3xOw?(plc`|k{rHb3Xu2mwIP;AO}4uh~y88tXr8Kard5MauMfQp_>}JY=$* zvpW#wn^7k+3|wWhX0tnDLJ-i}wtPW1!SdULWX_u5FZvF{cEpIRsxMCTg;Rzc>!Gx( zU-!R2r#SwTRB4yLS|Ki@zpRPkfyBSUJ@piMy;do2C;c=BHZ{{evTwSHWUVfJVHXVT zv1fxHy*&9gqsp|72fb|zsrPH%PGrq82TW*ev}{A&zN7ibIFYu0HNU zoaJZ$_`RnsF)^PHdZaRPIt!Dnbcx$-w5U&jK^j+MoRNM_m5Dk(ih?dX5c}2e7=Y99N0Uij?^*&4J3YdLa z3@D4-ZEpm*u*GBNm*xaKooxyuEi=YimolY1qMkpCy$H_UA@Hz$xY7~l)(19k9cm=^ z9Xxq~!euBNdL4}4rh5xH3fvKeb5rF-sL>@VH~$QM|3Kw1PMaraT}$HQwh>f7B$#7< zH_HMGLr`n-h48z~xTiRq3Sd8gDv_omi}cVIC({5QyouNBHM>I604=lZjW-Op$hRK& z%=Y_pmy0=S_O;$!)acC!Oq)z+zFljWEC1_%EgtPZ3ZSKF1BR^^{tRUt4*~gE#ThDv z83=K7+ptU4P?t0PnKqmON*BW^n<{Nf8Z#U9uf1m=RS@P5z@bU4ZQPwd@0v>h9K0Ge zdV=pMur?Qfa0;*&Q<3y(3K~TBX?1R$^WC0aoVsP;Twn1=__FJT)|qt*HEwV6f;N%Q z{bw=i54U*jiq`qUEG^4_^#8+rcssbyGXbT_vkz9hC%aA>V=T+_7I%1(x;*-omiotVkV*b&b+GOg9^Oc>{pftC*C`zcZYPDU4b?+lLTCwuv+XU zXg_!zg0N0zNPWeQ>#>YDC90)^+sRZeD93;(67*z^7fEB1SQ4jXgqP^UA^3gGWd4_5 z`Uglj#mP1$-v%~d`K>%fu?NW&QN54x-_$VFbRL}S-+hWLP9>g(YBx3LAg0^0%TVT- z8Dgf(vr`8~xTQVaW9@Qmk&hTX-jR=l4{i~U)NGY?e`zOeA8hAq_904x$rHVHwt^p` zuo3Xljg>(|>`VK}!TFmrq_a01z_>RY$#LR??US-W5pDvm5pE7-|EmJ)=9#VU^Y;z5 zJ3Mcit)oGWGEB_YJ9!Uzq76KJ;aAqX+N7M!@I8;q{2c(bg?sA#=84(?cav!)NJ`d# zbZ^kkJ!lUhAij|{#GdNRTo-K;+V z;Ph6#9+H6pC))V1J>i#B`yu3n7!dJO6|t0KLji~7w9$q@k0+37m0{xY8x4-l#x;Mw z1z5KPM}G26*vGi2he^Atlu?ms@7p4pDV%d=Gx}Y|goVUBZ*9xq0^OTGC014)B{C@@ z6yd+XDw=|*UVq@=LdwyhgMq?nrbi|?dpJhA-(uGgW_WRZH*+jx~y5^O|olFD=FJ<(mYROfm3j@_US>+}WN{b^iwBJ-j?1*_E7pN@0@I@X>$ z8UA(azRq9nI(6kZ{|9(iPSnWN#;y;2SMG~og}~CrpKTbX{UX34qgT&+Jk91(!*C`? z{Q9b|I|Egnx{3d2l2rqc!dcXhxF%hd3wWrEkH@0YU%Tl_iod(WVLHkNoYAYkEY<@y zHBJY_FiurE8QH)cA}W~+|6$>HStTkxXRB|KE9pLvH(h&#(@}&mxIzC6sds(o!fPAI z1dWYZQ3((MK#*frQkx3R;-4mQQA%awMfC=(&*owZ1ntFNb}TfSP}7ldF5ljKdf!s9 z0^URTbYJW}R3?|l(=c4N>bc7sd#{<5nKSY#&t9WxPSovX2c){J;71i6r4?T&RmPj) zH=RFuMTuQZEB-zoD!!=}dw;LC@KR@e5Ii(GrA5K$sOx0!oh!1}lco)1OxJU?_clIr z%okgJhr|yI2Wne-G}1hRJL#o&-)Lo|V#FXASm|@~Vudf5j?W1CYKOrqTn&_8Dm?k% zXmhNi1xI)ViUMrM+2R%Zi#`Udkis0n;J^j-0~9pEQ|zCU34gZb^SLf)`lRhqMJbqg z95O)j07vM>66wmEmYZ9`j~ifX`n1{+MYd9UgR_M*a8{xPIAqn=U$ec(-+TtPuPtc| zcF9?}n7m)$1U-;k%%j#}H@DT5HKqf+Fn#S447}iif5wY&oKryC+JPiWFbjnzEz8Y3 z*4{Whsra%9GsMpBJVi|Zy6?Yy$DhxE_4umYt}Bn?Rt)?#W+xKjzg2(U^8%JK`_U!m z#q|3YIg>xzVC$FRg2rv%k~B;@qb*I_h%8so%S%}WyKdkmF+k{P{V_b3P*kqSiW5}? ziY}{kOl7-68R}EgiC6Bq8uof=W{0;hJ}S7}fibsgr#1&m76d$AJyNBES=qfvUywre zBt5O7x?ZeE;gj^%)7}5m!_fl6n*V2F%ehgS^ zww%YS5ls4m(!S8S4)_QY(BMI-Os3n${Qj$FfK-dODqX!1&<$}(5bJOK1_$0oxg4uGa58YFq5iT$fG#e zBAdR`Yi-c_7UB>1MI!+RJt%fqRwRSFKzH*Sg|%k4ofGW;hgwKm?r?Ws!SuO z6-exC9m0eBgtQ8j*-|$T;Taji(!fNrtOcPPwlAo2Hv~8NHMl*K%cMZrsV>6DUzr z>ZmChIzi(Hbr;J61Ln^{!_v+<1Z``V*c!r&_rXarM)=W0DVlEr=8etr3-!^ZNpFmB zq%}VnOl+r;xKGkAmJ7Ef4?dN^g4*^@^HsKU)iSd&SJ>7206oW&uG7QK&Y<3 zOzOmKwi7|QPqJ8;8-mx-A143w(s|{5!=D%*!!+rZSe5p#^i~ve2V8Mj65{aOK~r2| z-jO*lr0Fx$>MNnW_+n|5oKwJj5q@;yfE)IG(Fl$G#$0)R*+gq7I?%|)ioU;hh1u4? zAnM7zyd#5LpYMTd9<%zuY=e2P7J7yum)#>+<)0iQ|3PPido{?G_KVhvub!d!D>j?z zQpI09%^LI*LS34XXz93J*P+bc0cz$yNOTH;g)(}*>hvU3ioe`lm^2DOr9+#XhA&o_ zI4|1de;WT)S{x{5qwOmupA?tl#_6}??oY5(4oOe%TPcd}*#<*PWrT2|S=>1Il5k0Z zO&=+3L-eEXx-@^aIP%dvVCM4tIhyb&%|F!-CmTJxqK6Sz%*!Qm#A%q9#lYueMf8 zU}6(b2qtIZpP*A-b;DSld0}s9xM8noQ(-H#5B(6??$Cl56lC*H=_prvg|>w2xIRtg z^y(S{kpAEVBg}z5o3O6m$f0r&XM)i5GtVoUv+l3<(mQQ!EqW+b&Y0e7akPzTdV zsm>gK3%S`K4CS!%QJq!8I-0DBzvi$%QJs-xVBF^ecc9Y=_-g$W`;o7E*ONpXYsR(jUQMEW8dQJ7A8yZ}i3q zO}usTuZH05=#q6$$ z%36zf{2Xzf)mOVzb>!04bdq)Sr>*X;s;_jho9F!RbXL*3j2az-FMs`;GNHn|UuyZf zYI~Ze0_M8!+?Iy!M&3;PdD#9@<&w3Vb+r3*N*Oolf_;~DGZ;r%b;GM|MzCt@ZL!~X zzF2_Pb$VC78sp`;9dN(+bY6C{0DT?+bJm_~H$_C;Oq~WD4DVh$20aGc9bn(iY@fz0 zZ0Ftm$j#2lb$VXV>+(0O@quo3i**aGJQ_xDdM*2PS&`K&n&_O2Z*N$u_o2^?j~{m? zJqKO&Ej*ZAx%zaiR6Ca@_0+{BonxPLolNbONu0X~Bz1M=1$VyElA0q){I{4D~;dwz!v?=L`iOx@iB-B!d} z1@a7dvb_B_J^zVuZhCAHXnAL80%|c&+8A?7} zXY21(HrpeM3NxQe20t{?2O)=R?^Aen_&86xt8Z*fY}P*SP9z%*GEm zU`5JH<0? z{goI~poUU)^5?+pDRu9Ih?YZ=_elxR)x`n`8E+)Y6{N56og2D4mrbVMKY|%M2cmp1Z@%(P6MT{_w#H@mUzXxfgB zz@?XknmCiEmxw7gt0g=rzJ zmAV&I-{VKd`hQ1byfo!(onP$G0}ClV9clb7A^nEk&P#gpS9bcjGaWiqnwX_aE8~(Z z-cuKW(N6_J;GvrcLPXeiB0`+EEL>ldqA{ojZ&tpJF_ownY;=zi0WIf0a)Ftv!izs? zd7{yBe?0HPfk(U6V1T*VG+-8=Y z@sH%zr~agsa3G3DO6vtx&5}fWkj38?V|ev;P7D6BJUAxv_`|Yo0_TJ}UAmE(XpY_x z{RSPr#|1wm?PSp)KP1(@x1$#!mJ~@u9vk>v*^P36%T6mO4ws+<=;Ci{w)zqC2;xH# zUI!*-%JMA;bO$DjG6fcq!5NA{l@|fjX>sh669J*%dt0gfd1psXORx}7I3feVTc*WE zXks8ER-UI-oFr9w{zml_cL=1ul1YB2r!1dNa?k(c-y5Yesv~mJ+ZYw9C+opXdT@oo zWPJ5YyH(F`faXRfU~r@BNQ<-B>$an)BNF1nUjt1{e@v~uxbD9px@E9$P8G~2>x(?Ptz=3DP=s}?W6}w{CYrh?p>W6GeN$(`uV-6mPK&6NWIVcVgrPY z=FL=OW^6e+6<@LXmv@;WqGr>8(#B%7Vl^r=ZDQh?7}MTrq0($WEtZ{Cv)sX$h|jI? z_udy;m$2X|(|4&rFu5Rvk2h03=>=@QRWSNO>XkT;9&H$KVVw^aJxI~SEOR3Zx*~8e z0-FE`VPnGRGVqp_tSf282i9@L-(K>jQP;%or$*`PEJk^MD^q--d~n!%scs|_#S(7v z2Nzr$I4rru$BPbymR(ua=j_V4|aB zuZt@AjRt2P<}1msQ@SI;E(sq8U#cp&Y+dfl2P>+Xg#0YikDSmVAtqBmT*`V)iMho$O`-quI{IZi%MQJ!SnxTlE`_Yz~q<4Tn1!;#;d&#dxIbTpYBVh0_6-+>cH zzr5$hEjuBRh?MlIT+|45af@XnrlDnIjxBRUJ%L%bX-mjf(eS7N&-Exn?q zg=Tg7{^&05P7O_?N87n3=3XkuoNM!#G7l>45R#s1AWPb3)5=o@2d}rneiuvSc_a|D zC^k@QsC8F5tUNHYDPpvFb)qY2elYAAr#tiN+z$N3&feOnTel`C$F#^qRZXWWO#5a; zrod#I6cO2&K;2xf-@t|Hpiq&{(CI`<3aVvv&Io6JAf0g99*0#e_vK;anf>^|XQ}wn zLhr&L6%9|hNMZOeb~pd6#jgZo(QNiyYiS~hudf*c{5tPqcLF(wFGKtD#nlj;DyPkw zM)0z!Ba*gYTB*i1cIlo_Z4!}nko_5W?U|LxX`tTdPE)AySx3L#R^S-=w}p9d&jgi>`qz zS|^AGl{;5C@$!& zv%m?I4|{E8_we-Q&kvWXh?^7drswCLmFRBo7<6N@0H?gzn7K1S(T<@nmZEw?p)flV_9PGyC&BIiE1}c{BUp^Fuwlw`bFn%`c}vi;l74 zfueaPu~5FVDmQs3rNOXl6I@&QJI%>TWxc%9@vP{^W#M1uRHuHQs7u?_ZaE1wpelDU zEA7$gX7If3+uHH|{%GweKjW0e&1s)jR_}4d+W67U3a3_DA7$0(rz&c_1#vyD^s20? zDx#6m$u&FDm|tw8Z8j!^lbkjS`;NVzrbgx}@RQW8n`ofVN+EYO)3s$4R(T;=N#lo; z$DVFIokntVOcD&pt zYgLI6KU%3hTR}0f92nv(8sf}Uo2S#(7x;G2)t_;hudSvY8y)9>j>JF2Gjp}$j?Wmm zG|!(>vJ_h3=9o`e2pqCkvGBvpLNFdY$fvX`-S+5rz}oBgXt*g}&^05%q(iZsqe-I|T{)wlEUj**V!v8=97z#RAV^%oHdnQql<@97cd1Pq1QjZoO31YC}-{ zc3UYfwS;g3@+u)2jPMQda0KsA`%{&J%VYD12Kel`@>VDzdEWN_;p@!92$x^mtU&b1eeXDF0MT}D9?0eS1U@!(_%*^wi&;9-W zp8I~jzx(-ToZ)z{*Xw#+uj|a26Bp&Kx;420zm+a20{`Ove#*ttyh2v=kA@^;hb8kI!j>tKcbH>Mx8 zbiXk7`&M_-Na9Cb(zVpbn*rC|-(3sUc;REp`|v$&f#7k>MXM0a4ckjEjIZfG*Qu2* zdL`oYUrXW%hjhKa!o1JEyuZGB*?}pq!x#&HdU3VrW7kqd7l^aV&K>L`9`Gg zO}L+u!wvOP$(q@TuP9_krdry!l8^Ua>T6j#zh!Y()pWlARrJnxbtO8-7al34D@OY= z#nKo&V=G`fQ+)Htm-f0D{?z<=!Y$sKaT7hOvrp+ublYF%hF|pdoM(P|soAggMlj9j zEa&aFzlvh?uO~i}WviHonZee0Asf#ezbJG?=qQ{O>;uz9C%C^4oOy0@ zy@5veBVHr%E5zn&e(s^PHLCQLEzdyQud^YqoJl9THJnXj9`HOYnf0dP@V_C_t4u7! z<5X(@5pPkC*Zl?V>|#4U8UyL5rlZC7*RHU_1+tI2KY2piaW&+LsYO6E=DW+KgHM>t zswNezl0xs^@v8M}{Ii}TgeQ+`Gt&Sdq*p>@Ba>n-&UJUp_RNF`IJTH zRQ3gNOAwuJ&wk#!h^*b#?IK593u5PfDK9T#nL~GbQ&*v*rXRteP&iA}KbdD7q&TLB9#l@cyg z;087ZT9g~}!g$^|EL$>x?jXfil1l$zMaNeGZdmHmI@~1s_nUc7N=$o9Ce7*Ut?)}m zwNs8&W1KZJ-)P0(C$gN@r_p-zy0?)EzOS^t+M9W$B?AW&`Qok#Ck^y3^P6e`$evRO z!k$sTyLWDsGiQOL2B71@2LF#OolUQF8mDMN)kyv zN@{cQNoC%rA$^+Fjk9=NTaOkR*9ff|y5shHA7A}k6hG%hd=~NY80o>U$8?g>?5;GU zsXq`5-qP~l(pf#i<#VfOxlJSFk4UMi;;)~x8r4MQza35_{=_m1YY@-97EnB7qCHx4 z=UR{We*7M7?lHfG;^(lyZk?eQPfNFAvKbk@?{^-PYR5wJK9>rYq3%?!3jfol^eSxG zJjFi>7&JJaSej}IsJo2#+t0c@s)hPwmIIkiJ??kpNz$*$8N?HL^Jxa+^m=bJdS?nlN{{?46t{9S%LBd_X2Lj2nKhb;c~3$G-nwDR;|C4T&r|BtRCTHG1W z7Cds~Y_iuD9Z&MHvZJS3#s z?tw!=;(D@UY!kOf?CwUBr}6>)8!1;_@l=OCCRaqkutwh@mb`NxI&AJImm;=G=f_4j zJv@?eum-+7?hur$z|pw9P^r4gKl7Cza?VOow)WEr@@{)L$GSI|dJ;Kg0v+u!P%n2= zX|+7P5XIUww^MbOzh3>Hx5(De(9Ojx^+m_hz2pMp{5wY)u`|;St7 z!w=xPV&2LQg#X^%?ft}=L9;E9Ap51Sx9(A=y2LMiyG>C_fEgFb&p+6gtR6) zT-uQ>O}!$Jl*O@hhO_kSfJYS6ky?IZ0At{f%jb?j)l-?q!x`}OY+5#sEj(Lzfo@8KNMM1YQyMes2AAevs_vMtmvuvp9(>=2WZ zXTK&^m(NJ)b;99fbiPk4LQUGpK>GDdE^0A*N*MNW$JI^5P1VojxhzySQN43tPIaeE zzrOoQ0}C8)(RFF?5_{-pNcN7&@I)%R&#={Yoac8&eCL=zy9sE>w{j_eHoFuTKYOpY zPGIcr8gmaRJ$85Z7IjfXR+D@h8V`dDs_^dHf&>CRh^`_r2Bn-);7FWYiblsb-U z+bD3^$KDdH*Q7nu+Ar4|%P)D5TT$dD0wid6QebW0a>AJJxo@ts_uM=y&IBL4hIc7 ziA?&{opzk%XyK=h=(qNA>2{wB{}D)>n`CD)oLH{bW{JGS-c*fBVecG6-keGFse?>Q z({N$i7K-SzyEfGevim-mm_4}>&bRPR?HTJ$*Enx?7_mror-gk8*=a(O5##F$9smR3@oDz4@;C zrMQG2!%`_I7WU90h*lapBXF?fa+AV?SSgnrN{{pIAHjc|eZs!*ady&i6E(YL^0IW6 zue6dw>Nhe*WhEj?9euxDVKJ*$wK;@C;Gj5I8j%#$urB0T|HW>{bOucG$FwzAbbJaJ zMadqR(XoEZ~N#0;im{N{nJ$+6ZQ*%n_fU#+LEdj zn!D*1J7H#oh>w}g>h-1Bu~9-^PH+fVo@j_!JJ}=BwE&wf)}#Dx$T%IlE7BJ7QDqB! zlqOC|N`nYiZ7KB6arV#+OryYJi1%x-v0p>$Y zd$w+?Z2bzUCE%05THtWb}8`Q*e8?Hq!4N@s|l{{4+S7`5!O3s5kQ!yrF=-dd{-4Lw?}wF@Zts z3aroLjDO!H)XutHK}i%VdbbSKsf|U7@CqD!mpTWy3e{B&HIB}55Ll@YC)Z7R_G{Oh z_w3$Lvjq4FDoP{0BIKma>jqIm%9}w<^$-|H^>GdAlTpRNLjqKi{4vZy{ZabQ58}5P zl&tE`B46GDl{yJdiW4u$mWUO%Iu;kGWEn!TN4cyYG;Y3{i`@mGyri@gw+VqAVE_Rd z%8!jKS2HzXL6h&Pi@HEsYFDWpJ9-#SiorwGqyi&IR+0o3@>*Jyr2`s6oIf;0dRVg^ z1W&NL_sxW`-~EC%j0BP4_{1?_*>Uyo1KQLiF>1OL%?dgiGM_%JV7Frt=rafwX&4^q z1F;(*I-CGzAWXS;>*}7LdfdSj3R}VQ#r;`>XMqP5tq@r2-$l0}5b7nD zOhMiyhcY*f!B3Qa@=>o=?djfu2o1AYd*}q}$tJv#2e)TfT!I0UR-=|p7Qx2Me^TA4 zmeQ^V{Su}&`;yT*CmaEe>gd6msWlq{#sMr#j0Wj|#EftBjOAWM|90u~?+FI;&fpj( zw0jOa)r(^oT`3zgF7k(iGr1dY_yvL}h+@!+YB-tN%%JV!6ZRzt9q78k9V-REH+Tst zD(MPfPTV80aEIE%&q|W(lBH_jdpFQ+1>NHAzW5K`0YxIwEPyFZKv(z3qM#)hXsH+p zBJv$PBB}umflflL)k@_)isDNyHD4j({NBO%}7GKs@dK44U@bkXpk6Q2ipefGLAR zr0B+1lx>@}hahZNwJIz`8U)#fC9ZMP0$#U(zD&3SK+)s&lmvd3_Y8(e+wI7~z(RxX zcm{yeQs?O*hlfa~&C?U^?CW^7g`^x3Z6cZuD~-vje%*V@nPfmZ@*Y~D0NsJ^&!}YS zB^VqY)zCt}ilQ>%Y@9OWkE_(x!PCw6|hNU8};}Z z>4r{i$`y}QazEHo93xe;_#Qa`;rGGjFLj0iVlKhbutXn7Z03;2(BhHU`%B5804lCB zs(Wu7g5x{Yvv({C|Ah(~iO4851pKk$MBKp_i_&-VA*p;gHyoDztiVB(Su z2kr^KRAjk8kBNNxp2(au8~{1lD;FDg2C<4uJFz{s*=Lx3Mn!c;*rPFHO={ogcOchc zPTIO)J&3S*FdZdh!G=y<)ccR_EZmeq(hrc!M&r)*kT2AGc2osrlp7%^wMjS)s6A>7 zC1s{~U=g?+swM;0myMaK8}vvL81{-8CFE5QGl!jEtw0l5y#ZnHq-cTFSAf0SN&$+N zUVt38qC$92-4EnJNZe^+(LZx+K}sW3&~GA~NK!#Bv2$pZCT;8pV2Fn9<0&4UO>hL{ z44_4Bhde>HjREmnoJ^%2GN7J&2yt{k{B)^^;bebCo6mw?Lt|k7_k%rcY7jSJ0^`9r z6o+x=n@mW<9Wantw#<8@S^h-{J<*_j08wb&NR!ih-VTHA?;a^=^H;V{ zS*dN%im$nKW?xzFlY**=i7>aJ=t#Ew#i-u<&)L-d0+w+vo+r=9bDIExwtjR#zIb=; zb97XL(T*PB`#-;w(3tQp2S;gmqT+aTzGTntT2<&oj2btZyrFkvvc-bi1=_$okjki0 zYFk<$8?4&Ax%L#4JxqPhV67J!9?K^h7FoflA-zw_=vIk!q7wtm4*VJ zu@OLib+dCKi=uXtVbXx7)JaEh@!rEubwC&?BE`WbhgyK94nC*NSNhLE5qPC}V-V53 zUPq}($we&>5bg#I1T<%@Db4(+G(1%-{%2wEV#+1M)WFX8GEmv3+CvxQl&Vlj zbW8{Udte*_ zbZ0u;6pBC|)R`W~gU081*T7g*_h>1iE@}t)gH6h)1zm7gZ~a8{_dB8HQm%#TfSu}& z6b`!p;v?qVhA6D;^>EY`z<(k`6hJsj|2I*$Yh35|FHu)_~xR#P_{;lcI|JHN>x&Nu@s5|&?O;^K815qim;t5df|CDw~dY0D&@lI0n>M12r2UlYAhrI>1bG0hR(= z+r8AnA-EA#UFv2IccHH6#y&)~C-a&aVr8QGOtXzrRU9=4$bluGwa{a$V0Y|$WLnvf z?H;34h}At0p=M&2#V00G4Nyw&qTTUrJ)nVc7D^xwq=!r^6N=MttOvG|>d#3JX2C-Y zo(9#Y*i1-qv#t-MNFC!9Sa-40m>Gj}vEj_BpS|3}^fl<`r{_~Jaz6`CU+pchu9e(jV_ohpIU*5Qdq`W3+p_i75H4l(c*6BSIOF=Rx z*Fl4u%cbx*xik_j4ts@&ZjmwwNKY6Hx)-qQ>eBgkSq`P;7! zBe%>!bkH89dI(F*R83C~We123JWj25Vv?yq%)%jVuW$oK-4z*xHGw4Fs~mSw3sD+D zn5q}_a09SotRNRu`O{q$P_5{$PLF~O`=LR_^*jy9swb$pipo3?s0sKSLBU#Jqi$x` z_fOe$9F%03yOeuB_F+qHJw&a==O+PwXJHqBXscpxm7(gh(9Cc`4yXvB#Ar3&(8oV^ zxJhEFJ8G2UsKc36b2UhoD$1aLsWL$Q|4o&(IR=o zcOD0OFoJ`qX%xyOU|DuU4$kTVswrv$MYHCU=g7Z2w?#HkEcpSm|mmPUdNVR%x0ms6Sg%2q2&p6CY)v zYi@8hM{D}FppC$_MJ(-O#wqX$geAP zK<~-H&jIs6;9xRe8<3Uy$gD3y0YoNM1C7E!TG53lmq1+bfVkMheWr>kb^ue%ksWGT zU-}c-c`FX&#@##Wq9AX8V1&%okD~*!8j5=xDYhaFMG&mk^X3dMwU(nIW-^QPYYfqs z9Br40>hMzka**n=Nb`Xe{|nGAGagiL%Sa?RnNrt5#X!jtY8C?2tdO=I240BA33n8U z33HdIh0kmvyL0bC+lcivQ44Ud3u1Wdo+4)U(7CpfeWE{O0SGe0s*59)Jt4>Oe~U44 z=>E9lCi*gZ!6~X-EteaNoH}hB*Bnqq_+XQ!mW&#hg581b-h5;<+)OGB2eJ0}eE&E@ zaSy!9zocCqz=#_|B6$SX{a0TB`HxnKEGHE>9uj(o|8GhR0Qf(Y*!O)L7cjiGUmslh zXQ5jt|6Pa;f4~A{mOFsxu|dHB>qGw*VxGhELDxVzgAt~dz%Wo8{5Amw${+vXghjiP zYh$G~;b`3ng#Bf0j4d?_wFEhU{g*<`QuP=W_fZI#cikY6Wx%?)qc}kegqH=hRo4#i zn8AI@hHga5nef!>UL;ZE@zx*wrbCnz{L>y9jF)p|;pht2*`kz_lp=!U;*)l=m1P3Pu2J6@)MO=C!D2NraIQF_2^z@!Q;hw8b!*rHYh8+Q(YsyeHu zNcF4KxLdaXC?OzzfG$H&Qyfq`5LM`GJ>N>%GrUuG4Cd(mnBS5eQ&i{wycH-z1(naC z|5!m(gXyDxyTELIL#Wi(h7ccT>iqF# zbN{=m+6(m|7gZVOK84Kr1+8nV|3(1D|Cgs4H(YN4;n4O~#pqm*kmcpFhRVIZ;k#$I z>qdb8l3Zhn`QrT@);UnldIR7oc9d-{3=(RU464=ZH$AMq~s=-mI?eS{!ah&WwGI|eP28t|Mm>9r_6xDF6+WRd1zYg0=3c@;#1i10n zZ}<6ACu~ejelyUEpihT?95KfN1nw$gKr#d1q@wkf6ky=FeRF|>o_#BIvq`Fjhy|Vl zcu`m^h6uR~==>>y&QrGD-LFJy`+GeqbDOrG%! zPNif&6!>N?UT%mK>a`a}9rJ&=8d6kOBj~4R?8p&9PDu6-_5nLA?Ze%lfi|-#6vMMp zo&rgG9>w#1QhQE7IpXS>`mp4{$Frs$$&IDR<533>z@P~40QxYJig2KGlu(&qoH#y# z^^-m1umjZ79%x&gm5-XikrW<*AW?|yq==!;YxfQWg0LS+b+ua!sh2LosAZAr(O^(R zjW8!?J)-4+{_Qli{l8Ar0DyId#n8b+MNFAP5`k?T)#dZM3}Cn$DFQlxGJxkID+w&v z;x^zYf)Ws`>LE`01w2yHtDr@W7J90jSIvJ;1}5M?PE#>%{@VhXcW$VGBR9kpV1oR# zC+EF)2|XbP0?@2xi#jxu1cD6Y@S9kW!-b(^?4iAsU)tE-HedwB-b4b6VB4sAl$J25 z1Qn5?ag~@;j1&2xw5I6>#(u8p4x2=x|xrv)RvJK>%%Txg{jy}W2>(9Ie z`k`U!<58;PcIXp#U%lNH`qt!~N32dGToP<%9aP*LKL%4djv_gqJ$%m+?bGAL*nWTlU z4WO1K*R^bZZNs{-x)9A!zN?UxcbW-U8{jgz07IzQuz(w}s)7{(qfqsaI0V!<*`^7` zp$4wp0R@c0)p@L|np{mI8EkR(Y@M%%1a8l$RK6X8}{^lWhyF2M** zdZqX~E)tB{{WPw7)55Wb`LX(0fuPT_PEk||v%b|E2Yr`8-`b4x{vNgSYfK;paHGq# zR!CAb;ztruCNUaXMNE2bK~w+XGhvklVM})K7Zeu=0XF&{qlrw2oqYmd^|%FPl6nZa zRPAR2q5|7SO>aWf8rMn9tY`NxNJ#(XK3oVDfo85qI>%8j^6k-OqW-b_?GBmet9+(^ z_)en=|9_n(&*7$^R;vAM2#AErX>b{Ml24sJb|gV~!?kyOqxKmt+YOJE1zzKhkD3$^ zM`zlA$l3oqqfD*mlpIzAwc}_1<$(g#GwDcmm`Kb(==jwAt!oFqx+k30 zvR}L(7udL-`yzW7Q$I=s4;eYid@g=$Dz`_LLz_1Jl}^K3{R^h0;U7p%lml3KQF5>2 z7mty>5q1Uts$_qZ`k_}SDueRWCxG-2LEcK9z{7mRGNRE_alH=r-!>8POke8|H+!KZ zQ$N8LEmoUvl%i$Icy)v)#FYlT8R@tlG#g{FYeVd( z&h`@SV6kce%V7=<8EYto z-4|tWvNV}IbU;qVlhziKqdo+>qstTUl`u-x7*vAAKJa&R7Z4amE|rrU8+s7+wG?lX zG_lR2N`bvx%8~q#*TZ@8U|=m7?jjWDLJ2?wcn0m@p4{7pcdJ8$jay60m%Ro#a7%05 zXH8n!MbKUGyh>S@yo9CkUPPIQi;zyrY&~+h>a$h%?#`3m z-@7$q8R_fQW6}=riL(!|XxIZ3v3~=R{^3*?Ip3rlGr0ia2)#2K?k=dAnUFJQ)N0Af z#KjHxVe;jnqXLj${3bbQZym9_wM5QA(*HgC0Uo?htVvJUY2RCbV>_75hEB8=^8Wg2 zrJb3{OPDVI%D0z{Z-Qa)5^CR1;s1L1Wp9W*hzU9-nVIog7EY&$s&izFAY0rxOiafH zx`(d^tx!DEy&gPT2^P!a68r_b_If2QTlb$Gc@g^ar#Urm&4{n!IAjN z^tOm-dghJi<|oBTv*yVLa6gXy^1jnDHCH1Ia%yy<3=*q#iVOy8ufh@@EdNO}ntN^- zBJ;{Za;xV8fzPY~ImN%fa`@@`2(JWlwAz@H;_4 z+86qxd!L`?h#q(wxYuYRGTkE=&oG5cuPXu zk#;qa|BvWijRDQMAM!_^bx@27trZqeHYO~c9B_Pkmd5^s&}AkqF1q?&uI4(f<{fUj zWG*^cZn|FXaLAP_oQ^v@lRI4fGE?QP6RVZyDm*nsG0*!}=(7%v|I*?L7nEQMwmtEn z`dqR9X{PVn^s_8n;k`Fcl-$=0$fTbw;0lLpyBQeqVt<@VbDd&17~5Zi6Q2lHh7Fb(f3NDCG#yO*QYAmFOzvzrV%J!{Ci^JatSxwq){2cu zH+Bp;v{4+ZSsqM>O{sTX)G=%S80x+L?r!txvnM3n6z!|lI)1q2$~%|i*Yodj)KF9p z3r33&1k#3IC`9x`ki?!$y*CtNLtoMV6DQCg`>ab(Fy2Mr6%Qq_G$U?}!1ko@=SAcM zwmFX-y-H}G!fM>3IklCpU-L{yjiF=l<0nQW3}IUWz0tqC_Pzd^KL6KxDavvioa&-FlOxb+r4X5R0Y4`qB9+9JnOkAY~HymlX6Zg_R%H#|uBp|)#`09d-<4cn+ZgepdmD7Zz{Khr zFeu{t(YZ?lCA1kGcbynaw9PP1%^BhHGZ=Hz6+417zPC#WyEi*rFI{WJ?EBb-|Gjf80}^TODXiSTZ3~_n~qiG8K34?Bl^Ds1_|8Lmtyyu zgGoQWU~4}<{%Vl(+(_LU9YS20Xp5>PzSM+|7s@bjNEcumrGwtBzohF_q>c_>(U1iKU0J8dZ2Z4q))U(W4Xv$-on zLaJ2nv_t((0i;2_In(S)bkoVK06Hx-M*(ERK1A8uT-#aPDx&bpd>qnG*?@(${g&#D zv+;

a}Kw$Io@oP7KXXkq&eZI$lnx(?G!rD8(Apn%llSc;XBEf$o0yqr=9RqpCDz z>5g^|0;N3=Lbk`Q_;R-eiAS)yx=lnc+Wv~y=&0CIsd4h9+`0TLuVy??o}rRh*9UZ6vvpWS3q)a< zRcNw4e6+!Nu*bhy_)?8%=yC|GMqm z`VuiY*(IutXrmVo!Z#zF!x#OABCnXhUZ2iaW&flPVI7!okH^llI#6XQ4b$8P?H0z2t&?@h|32FhPa7&?CZ2M8mRUlbn|# z-dtANbvtDnsjHtYNWPEX-TrAi`Is^@pOdh-x-I9{bh}GE8@u!O2C}`-nBm%c zA+K*XXEVDtPSxb`m!lo6lWp3f;2lcY0l9je{R1I4S+wql-;X-&8`ocdUejBT75b*b zb<^|$8fzos(w!|3_#t9u!i!d~T|MWZ>#*r1MoOr_Du{+ZO^C-TOxz@bohj8c)0D8; zG(?P->6gXoBp%awQ$YDfzsIQKoB!SHi`r0WoXzN))@QDr3G4cKY|adJDgK>F_tq5m zF@(k5BGQnYN*k@m_PmEkoIAhZ2rITyd%>YhyO5nlJV*kow z|4XHy6I?j`uiD!DC6aKvlH1-hga;MpZ-iUyT)dDnej)DeXpB>Cv7SC+VRjpL0X>MtcY-bUg%Gqp{n(h*7>UAZ^o{jVs8jN ztcq{QfxHM9ohn)phO585@f&~F7gtxO?%!!^c(Q-8Mg-h{c2JTt%n@VMy=T?*{6Zzo zhnzZ_Osmd$ObzaK1^DZqtWuomA?|P-tUj*8cF#TQ)ZSN?j|g zgl+o3w_6HP>|t?Tf?&5rAZ+WnZn>a@Qb5j&Z~ z&loxVEJZp)?(oRL)tqsxJ!;32Gbn=xZ&`b$!&oY>@I`N~R@kM#5y0o$|M2++`R)hd zA6>Zu-83CyKzYj_43gwGvTs4YUWcng{qzEvF8MD;N}`7rZrPx_tVPZ+^2w}~p_5Ck3vu0Gv2z$H~#BoGj z+caEt$98aj;L@uT_?DlB5jG_+SzQXuFVm?$g-D6DE-Q^^3YyE7ANc?Lo0l2O7teWm z`l`sUmI^lwT)y<*P#K-%XLmn}{#Y}Ab?^8|FWJL=llEo0*JE z3p)Yl4b4@v?(Cg;rezlF{Gjc<))9yC*0G9*7NnnF%XKQ|kKJU1eV3@>8dtu&aD$y^O6*fvVs z6>jqyveSxptg!vf|DM~CcU(v7iFUBf;Vnx@8uR<-i-%Y(=cYhTw zyLzhar_$LvpOC=1tColgj<287AL;8qSyv_1X#bY2mK+sRkzagk`ef<}4s$xbcI)h; zN2Q8x=?6``mA%;Jd(K@sJYz$W15u?-<5ywjT50Y#J{=55Cce`NGw4=}cPqTu zUEb`h;PeOARYbZ}dACSz*QsKGp+V#Eud(rdNG`wb?c2+yTaDc>3(v-#u4Ra^Z4pXI zceHN^@ag9py7-Yo#FISKuWqC4?OT{0jGn3f2tGT{hYH-1Op{m0w_HDh{gdUR)cpS8 z9&Y|wz0#*gWiX4;s&*Hi7RitEGq=}H z4EgN`>Fk-iH#bV0;IGsukX$T`GWKczD#Z4g9UorzTI?8I?$lcwv!@Q9I@#;hRc@Wn z{WemIHvf(lyHZw@kXD>gm)|~`bcUyO{>R!q{Pr``it~8cjh_wzHy*aI{dwIgb8CuO z=wr%n9%c7=?eLmL!Ea~8JAK42o%VbYhY+dbE3=0h&4vTErlHpsSA#=@^B)owBk;@2 z^xSPrJ4atVpPgOKtlB@V^r@ZkZ~EWii14^AvChUYpo!0u;9$`S7u{Y?^eGapE=uY^Gw|tgILNi$ zvYR{$?Y&aD`)5`?8Hvc!}6wPwXb;Y)ea1qO?!$nP7QGLU@ zJ3?<#46t-X=m8bAoAu@VMo+XF-LH8|_Oe~Q#ZZb9$-K56ctJ=ArlT?1+PO?OSfG}A zBM8Ya{U+*$T;0^Wi{%}%)vjBKeJfYTqDMxMaHzBdRJX?)L~}i@iTOkkm(mmW8a>)B zHs2i6)R4Sw6hL>UcHq#qU75b0Pj#iD1S5F&LGW%kf={bEZnWZhSnDP|tq||J)zhfl zW7pq)aMhV#Ig>mlWL;O(l|G#CP{rmNOQfR_O%MMZ{i!Bb$F&a{)?N2r3yKuI`E%RI z>?J#t`UDniZhEEWLrJ)qq~6Z2M76C=uflu|&KsBQSn*~x=Z|dbg*s}cqy>)@o(O5L z5H@D{cK)~Mm8Z<9$ZLCHPw2A+$II-yQ_{B1Sjy>3>KEmwbfN9^(&OLZe-BvjC)~10 z7`&2xZZCFRI5G8P(LE9$%bZ^PL~$2urHx)uHHCX!3UsX!)twf_RRh21LxZl_t6JoqlaJeM8%rEXK6lsRH`p!8h0FXO(p{E zQ!yQ*WK-voF0J2mIlz9Xe@y863HygiT&Xwcug*irI|2r7;L)?+Bj}qFg~RTSrypnE zpgU8rV)Fd$3lDa7|0+kDu8*7N7H?`3A5b>uo)j(~>Bc;U71cW2#xB)e53d<+Y@afX zo1NO;A6gjG2y~MZ7Pg3zdwR7xY@?({9>2(JvI!qce6m=6W0qG1CcAs$l(VhhjpyF9 zN`AL%pz@=EjEX!{*$<4fG_=}#j+J&yJ{;u=#w3cy68hd)>v5OLiqYj=Q4=VO zOYlnPJ$N(B^F6J4_xIy~d-vBp>r;J6cOo;J;%2voFwsL3K8c~aWOlx2r%s80!LE+K zD(fTCpRd8sWc=cN8a?st$Jj9reoi$FA1_OLwNH>-@$u(9S#E_1{WMSM=?!`cJD8P( z?9q2#Ns6xBk}^o%MQ5jlF)kKgH0F{{89)BBo_}q#SjO+Iq|Qv!K6krVQaVc*uiOtK z923NsmTpAf#>-`A74@)Mj{9Q!MT)O}Eo1Dk1 zAhmL#i+b8|SE8N;eXHP;-@#|!K5gk=`y=t`JEw%S;0n2KP5Zq+j-FPJO|s{@I(oEr zUs{i^`uUi3e@YmRgea)u|GPQK_QJkSdGj$^Y&>>of*v(^VK!io_1BmN!m1HNiue3O z-|)0>JoBlN`=lAosSnjBgw=;=tHMhZ#N?}EPC)LLl-uqzdGD z*su0?vg*XpM5u|oUBt+?oRA_)e8c?OmSMtF-an$-aqj!;1)rCgtmwo6CfdEJgCI!l zf_fm@`a(sM>bDj)!4Me3bDZ<)*y&8XU$5aOZ0M7#OTAHcOad=^rQ7KrwHp{newlf2 z_x(kvgx0<%tqU~53LT2X=H9f;)N6vrN=~8Y!8peZyIseW(g??ti}J0JZe0rU@&ec zx)2`c4f!&~-|L8F7X0Lx>E>vAF}^6H@|Je$1taDp|gEVzxNc;<6B(q^+HPX!j*mMW8VD z_BNM$>e(c6Ov_7C{){60s4c(Q1mhbI4$cPCBFj+dt>G=+nZe3kNBfW~!f%`Yu`qRKapdVjxC; z`XD91<)hvWOvq$laSm= zG}lw4=Z2zfv%Q`*>#nYS`g`7Yt|(Q&emlHIIbTu8C16h6!8}S@ML)G>{=EO5sd>S@ zf&kNNg8`Q+V4Z3U%Exo>@M?x-V|&gjrR-eu>s!3%mAHE&26`&oX|tNA_sv0AqH*kf zQ)&2gqb*0q?8*84A=yLG?x>o5neHfM!#Ap~QrG4ne%&+3XGSOKV_(}#T@Sr)Ex7tV z+nMlMX%>z7C3x}ZK(IpL7kZw#I;GnieRhRYb;m45JUOEZ%hX;T-Mn{Om$75FAX(=0 z#>#zW#jOc0UTZ1(V&k`aeK7T3**Qq4HEqBZ7XA5eUjnOtxq5D575tP2k1g2L=hZYMTHl<|ycZ=dUoACMt`gO$`zNqGlw+fvK--(`j z7|_i5ssQ?~f1w1ULukM7j6eUp+%| zSIu6s(a8iT-N-R4$q_b8Jon+U!eEz>rpNeco&0wgx4DdSZVBn1`6N3M6*;m`=$&`o z{F6P$lyR=W8(CofRp7x%r&*Vim#mYd?=!5wy8TXAMIEv(d;JZ2S?3pjSoyg4*RAhD zt*mYjkzraH~ePPV?_j z{f+lLGCXM7XsA$R$xm>|RB!mc-npyTJi+swat~O;+c^SEY`%$24h-d|Wu=bZ#%C3K zMPnWxO$eH^JH;40+ZrQh%D`V)E7)dpS;|6Qb+~9pYj;}gv)^eRhi{WMYnQj|9bn8=M>MS$nsL!TR5`XIA#MdnEO5I#*8Nhw5-{>AZ*|c5} z%D)rf&Tzss3R>7Rs8KY{QRaR5+UMeX#|VvYsUmo-Zwu|ZIG)5Wf{}NXm%8|mnV4F( zB@r$%WxqaWbACf>taxs8db4o&%015xBU3MqCl^Euh0L@n>bShD8tVNu@9%3SQd&22 zBq&y3#&bXIxYwdy7Z6SFy?YhL=5n7??Igb|99xqbq7RXFw0#4NSYyvcjz2Un@JshB zw!Zl2-ARJB=%x$}jcm5iDecqh3WJ;Y?rW^t#hUng{9SxGPD4$nxfWu1q(;?MUAVH1 zN^TcnoM-L}l_@_0Uq@qVz{V+%(*ra29e@2XbKzovqPL88|BDZ%+i#i%vzx3nlevO; zn|kwqvp*7nR3-(hV-t_Q!n3nUv^C3Suv%4moHrFVp*D>?0Me$m;AG;275|h z&u`dYb;=FqetniNF3elM`LF8C$|b%~iB3rmQ8&&R3w|aVNiKzRx^ab3QtofpE*Ea4 z++daGIx`2AJIK9EJYXk$dl&ENJh4|IKK|l3T07uf?aPPx_1GV`_Rbdf?0V`rIHVSI z*ROrHD;btNAUkExb;Igg2a%w*8^_Wtv_HLP=lRoT5|VEaHo&r=#y*{}3<4 z>0`dzVv+Zx%Tp!-ucG|7c`gyd*2OY)yZv`_0K`bi8BF z0xPaPGqz#Iy)C9YUG&31zB^Q=h1rdp-NJ#p>(&1F`qJ~uFp1!rXVp4-;jSJT>(^PJ z#wXsNPSHRpWmXg4b4(+wS9LZ_@qY=YCh~Te?e1}$cmC9A_(W{ZBzFjnnSJ!mS6L%` z$29)L*Oda*v?&(#7#i3erw7AP9>ZAC<1Zh0vh=eWFBPAO5H}y1E`IS$=!BA=j`#dh zSinm&Ikj2c8y_Sh1J23a*M2@V_MO3C0x=n5!Ym~PJ}4@Ni7Me1781UfyTM@CBQW~B zZ8Ni#_>d=u-_HBRCF44opa|JV!fzJ#BYJw7OGLws4o(y)%4ZKUVYt8QdY^CQyY@{) zSsL{${>%3Z>G~h~cE5`(-OLcm2wf8P_(C}EdfDzukd8u-C5m>N^1heXJP~#($@r(T zj#~U@&p2I3>_)c8uM<^f!sj!wFWO(rvMw**V;rAfAQm0--`7m*_URZ==nJ$Cp07M3 zly#lMKzWEYRUju>PN#wA(_-e;;+Ph?q&&eRR^v&oATG=?n=l;TKJvkjyqc5 z{KdAu?+=kt!Wx11QhvJDkr)C4;h^6Cp5B=@wVA)T$ z4+=VwF&K+al^ccToG64w+-E6&*3CZ^@_CUfHwJ{pG9>21Kb_y@dFpI#p58!nQekM_ z*U!p-e;qQh4>Jm#x-O?SB*@g!mvUt9nCj5vnTo3Hi{oE4YOi#UYu20o$g?kdc1lZC z^xVdQNrh%);qt?wb21h8D~sC%9~9nfl>2{pd&{sonkZcqcZcA?CAeE~--O@48(a1AUa{ydd#xT_hXf!p`1t{B zIO3?-+T&LPWoo5X{Ln^N1`qWcgqN3@AwosZ8K_!=e1ZB%J+FG9~=Xt4B{q>5|V-2 z+ERHjiyq_RO9OJPQ-hwk8zz8iT)VJ%$VTtCCSBBvq_>dcdT0R1O?S{mM;)F^s zdA6QlMmgnzijq0VGgN~Ugm<>pETeggw04suUluO1JVjlJ;n`E%iNm1=tU`^dWRjtJ zoLmBalI*4#z!`pD`=Krvf1*?x0_vVPzX0>#v5GN#JmUGFGMd|D5AwB8ucBv+;Qtfk zD=A}&mgB{w8e?ROGR6oTAj{$Nq4L;mX%eC*fiedL=pY-9B-7((LMDdPjGm zp$A9jXoQ7@uC@knkPn3VOT;-z5cqDEaW15OR_|#`jJH*pXU3Jg5pT@>>7plO@a+FZ zNO35++GMya&COIoUK52q|CpWXR&$;WWA(F9KIcXpl*T;h%HBXEj_4h{&C+myCo?*W z`8=aLN1@J?RF7F}jnQ{FTVDecq8IT&OuJZ|jb-Yiq6S`oGF~CPu3|sZ56U0cZSei4 z<98S+J1j=2pIh~dG?3Ccd+qc^>U?gvB{uAJdR8{CepCykkO>nn-q$_OaAIY2*Zv$N z54SR#ZSlU+k^feIYvXCgmP0?W4 z8x22@MJg^x-SodRfbGn~H^li?9i4{dIsKFD_nV{&P!ODcA5P}UGd^{9xCxQ7R|G8Zbf~Jdtl&NkPilxZw20FdU6Pq$*-AiXY5$`|nG9D93!Z zF&L-*2p|z9)21TMDr0cg^OoVGLZ~D%z7Y-ZYEHpIIYbvQ5FutEroJmcM(8#6i)9PK z%5Nb5ZfeaokbM4u9cJ&x;Da{Z#&O5Eua!F^wgcT#;|!Xf&G?76@gSq1y&oWHXR*E6 zJZYs;S5D8ZVxRZF4)`T}Zq%pNb!pr;U<-|$VgTGC_mul(!VsnMPooL*6p;gh_2u-` zm0V!L=iu$#is9V`lB8lc+}Zg8+TOee4@#H>VVqFI%j?8aMoZHoe0gC-3};^yYpsC?mxu5zD*%Vjp|OMbD+@|{q)RX4P$xdl(2S!9mGb8IskiJ@a2Lty|_WB zCoKkRW;V6EK*Q!9hR*oUma4s$ZHDt}zYmED$_^3Xml(H)K@lmH-vf%CC5Zt9hwu`Y zrG^an=HFMu+hkD2n7tbKzhg|pj_j09tW*G>A#S_<1h%XaXqHc{JFjO0^WK_?7Bpqx`YVA9u{diMs zKgFevR}gJ&K@lG007=^+NZqinnEkfzNiwXT2z1c=(+j+}7x_Wx5DpbkfBu<$oI4NT zXvIlv@;+|$oU zXsH9^JNHJ9G~We>zlT>ePS#^BX9(uaRKQL~ZEw;L#e?M~Z*<_4v2KU)&>uxr2HYhz zwcr>TmZBj2*C9w=SyJLuElco7fV!34J!cG=pOc^NI#_ml_16M@%J>u0f&N4Y|m9x-i?P~kt z7vh|oI)+zz3~IPUa%-47c}$qdrQ$~!`7TD=bC651(ugwLE8ixi6Pa z&RJTHk7=6qpH2w!@!}NEd4S<{ehx?Cza@IqpQ(q4R1fg?+ej7o``6DDEV2y3oXG?Rt(qW|hv*hddxaGSc zUzrc#$w@Oz6emeSRTh@prWA4In03)tN6?&)oPNIkQgcJ??H=?(}`1W_a|0+Y!?CmpPWT4zDLL*VOjVTF1-G+3UfP+uI{| z2x$l@Fx&A^l6|fqxC?Y6g=*U->4(sl%LSW-dM z)_k6(z@=Qx>AwtRcigXlD|vd&5PrQ_d1?@BaI?KV56n6u^;Oie6HWyz&V0vZ6;9Ak z+|J()m+sD9``*e)?iW%3&$|JhwN|j#P6+RM(- z+J?cJ@8w9xGji*x`NN4qhwt0vnD5O9X@~dQOvBslt@_&YLy3LIBk9@eZpG{4nb6Zh zUkBYuL;lN%eg*KB;CA+Qu=2zM+!fldC6d-R*!$j|%DTS^cRakUw!Q6+@Boj%;gbE@ z%j-!-%-g}3J(v{gN!aJ%B;)NmrK02Ub|m}tI{U!KdUN&Vbwv1ODTAxe{&lKC=wX6I z=*8aNBL3|vV-5N_#Qb`MBbPNb`|Wa1_?zML4Y-wCT?+*T*a1{-zLI_tY5J zLLWB!;Y5G6!|SS$1-N_70KkpeQU_jfNzO0E0C2n8UtcOjQGhG;4b;~)mX6mw;dZa9 z3VolawY64hl#tsN`_(|9XM(pL>5Gv^SYI%C|9HpvS^*E~4i9M(59tgKX&n#g4G(D) z59tU`hsVqADx+A}cpRPkC%^Ei?M_+BZj zJ$IaUbi6fy`@|)8JCnWeCwt*Rd*Oh$B70#gd$7%~FrmG0`qSB;t7T#DtCTx?-@BQo zwNCZSy|Mw|>IBSO_9%x*@~ZT_CKP^6c7u1%4E|}|;PFD;?B1~kU$(tnpDqDDcc<1* zD|GuQXBEf*A*Q}Jxe+e2#K^FI3;p@-%3KGY)!PO71u5du{Zxnd)lEwUxX-3^NSi)f z#2DXi+ddl(um$Z^9eopibrYm|#UjC)eS4;PVJ&~V2NV8cDMSd{ymc1tD6AHc&OVZQ zfjYkhy{(JW3sJqmlTJqabf7*Nb|4B5j{&te>K(vC=eO5G_`S2zj>l|LE$OCwX}cHU z`=49b_rIUdFkgjzZ>ZnAH^+2W_|R^q^q<}Nzp%ny?CZatneVEb6zJND0E`(89;mjXn`z*9zQ-<|v5+Us)yaKD*gzuNJ%1nwkL zEP(Ip)R=FR?_&Fy0&tbMQM4csr#zTGI#qd&*jp#hH~)YC#(tm3aC{A2^6sAj z&m;|A={wFxZp`FhQ|hmD8ZExhF~X1cSF!`X*AJ5wf@$Zi%z_^nH*YnpS>M`xU+(3d zgAQJvvTd9N;7GoGwT8No0~S9i0$tv{X$78#K?kFJ8|iUYCuLFQZ68%I|J23b;Pb?b z#et&sc(~wiGTN+u;F@vyd44u1()RK{L%cFiBCQNeS(wg~RH7JS_D+7>%z3^% z=Y0`mYs)mJzQL;3doVj`M7+TEia&YrHMy^! zZmnOEPm%&69VM+F~SCl>Q~A$Kiz2zP zMdOAVgGAiKJn0kax^Q;Tb#||a?{$iO$II@KFmSO|!P-#QI65Z$x;@uHMdQV3Z$X;j zKhN#p`~wT5V-~h{Hj(}ISSb9k*(dyh=uw~BD(9mdjz0eBnr58HO?OLZ)yAdlQ&(d8 zrKV(KZ@M(;H>^q~H{gJ+ea(T8X~jll9m0H|A|`q3**9iYffuX!__Mp5F!$3F3z#pE zMF@DC5q`UBxdU2)t}a-FUKdyZF=sB)B;+Zt-)`q#DL3iQLMe_y1#_Hz@MRaI!cQmW z`rfw(EJ9C-YJYO&7B>RYXV``$-oM@rU+e*IM=Y=Y&wW23fQC2z==_$%6|d`Yg5opBX<|SFisc+{ke(%ilFv20A_pRZMr7? zrD_jR(#t;quxxy<$B;iVALlc6qc1IQ3iNePojsx_zNgt zMn?Z&VzT=kVh&}FM;7CO+nYi6TjAGBb8YjXpuPkU`6VU=({RYE?yg@9jjZt^>vax2 z#pt7t&R}1*3Q3`$6N$RT^zLK!I|#V-s;cTAG4C6Jh%t|;ir1xzj{7J5*GMetoiJSk zt9L{U8v@RUm0P^6uY!8FN7>H^v!nVt8>wh`2EROlpiiF=_Mrdh7xd_Hek0)@m6f9x z`87<`Q3$hXx=Y@_m+xrCVDdh%w$GGoMV{OKp^x+h`l2$tfCC;4|JnR>Yr^IEd6tx_ zPzW^|2(a#to{v6u(c==`N68~ii6J1g7!nBY61EH<;OGg~k9b~t92uBHeXl=ep7p!w zh6bRN;hwzXi%NT&;dy&JeZdoc96Ec=rk+-4$iGx@ZG=}QfNsR3NHa?3aDN@yfx22p z7*X~|w>$8DdFpsRU9w-*-zvycw9CU3i4+R~((K6n1yL}(9*Gw3^gf`t<4SOV41Y69 zoJ>IMOQhKw6u#qDd~}0$>}E6f@l%@X))wjUW`U}~#ZQG&_VybV2@LjyL{#(Du;F4Q zflyC{$H&-HgW0rs*HjPF3+b-f_NO|?8J6RVhz=n>{CY|ZVwJQQL}}Gsk)I|yD~W*- zKo#>7Tg$o}Z+r?m@`wK}#wL2kg@LYE2cslwK%Et4?glAafe`wMz~LKIqa^sf^hwA~_b-k3 zxbNmfxczclXbc1o=lfnRjRWr-VrEuJ-H)HM;Uz3>U>WecLAJHxIsabb-{RW}u>dh$qz9pQI=gveHR|+5W%n71 z3KoC2Ree<5dG&V*UxcK_kT-P2ZtL9DzbNdj&aFma@OM8m{$bsd6V@BiWF@c-By#66 z7Y+aX+jE*+?`{aasU>8{<@`~ECU!27b*GgkPUev7tiwE-^IypbST|l=6t+ zS^iEQ!?SD}A1c+%0eY6D_Sed9w{HY?29w{{;UP5c=X78ZKFCI(h zW(gTynRv_VhX$h5J3(k+Q+g`U!;&v1@YUu8J8#uP?IH&ju>}>O*5$ zS{g^~xbz4zsIi0=fcUJ61+f7UQ+&<#N&76-sfm(|Kt!G`M|nwv%WvM{kA0iK*0Ai4 zVMmD04ZocHc0a@;M`Z}lMpRaR7|LT#>ZTZ+KqxWc-*$<_xK%EzY|ZWFE;-|l-1`{&HjXQXMrc+5;ffLQxa${*wPDy3(m>r6bq zCx|eAEp;du8|FXu?pSQF+)q%kjaMv4zG|8fzE(;iCVr$zBp%bUBnNTQZQGcnf5nS` z#DBCK|3RF&1YLb@Nrs2E9ms7HLJ~{Xk%)BGixxq>aBXC|BS<>{(^xT!jCXQS^UhLf z+^2QJBBW(o+GF6|Oz6Q%{`P)ndjy%h@+0Xd=?~<#08^{B=X6~S)8BHKtX{YU^}9I! zkVAu+gcd}xjIF|}dvI`{e!7eJ_(&s?Wi9AS!-_8Jgss2$A1AZR-+F&9QJy7@5x_4x z0*_9pP(Ku?^K3Q<-wps9f`VCq-raOxR@Ol?uA~z`0>h>JwiCttJatDS?(H2AyK$w z=kI%H9p1lCXHn*5K9zLpV`v9G@lN8Q^0nVh6wlQ`@qn3A0x+!Wez#$JHT_0a@M?oF zSww~-pAGlVXS)UBt1yj6AgC51dZi-2K)dxFn{J8f&7q2fw>b!acxsW-T+J06lcV81 zbon=P_GdRmLv4|HE*VMDl%wu4VYf|fV3CanzD?gu1YD8;4kMk&lbq}X9=fr5d1L~l zGEc5Do-TW?a$2EHAIOa=J{9HORtI%d%~4An2P4MrmwpD`A+LYAzb^gkSNh}F)wH;# ztmt!Ovyg%{JyWbv?*7|5|0YXIjB33Bgzis*QwXyR1pZ%y<-}%<`a#y%91wnqb@-PE z6ru6$g+D|_zoLFdDBZdiq>*u5F>|@N0!k*$KjepQss0Z}eWH($|>QOL)oXLX= zqwmN{EFJm6IJCnJ-wI(o8U<(2P1#S&3!xw56TvXRuQ@U!F*v8BU$Hyr++7_%Db}Kb zQcL_@?#rs1aM$0kCq<+-c_3d?c2Q^hJ&g9T%tHW>GsGGaoCike(_o+~ovlMfw01UTOv0cF5hBp_K8Xv?xn@0@hIxjfNF+>ow2{gra?YsnUm%kGSJ!zQ+h3GIO zj2ByTVW+#7`DxV5e5O`7g~N zLB{tyux?CO49*a{SvK;J*Hw#|P_oLl@{kp&+=YH?R2eD|li*N-hONA4Xb+vDppASL zW}u3JXx#`MLKQFUY4>7g07it$w%F*|mo3C9UP&omTPGxukoqPQ@eT?k=q!(G_#9x}0w<0p}!vW;>&w~a#(WZ{hDK2pmksh5$D zTPV`~pzLoU4+*N~gSD8bsJ7yZ zltq6XJ7QV08plsC?=Av|m2-G2{pjB!YxrPadv|eCflpwGY+)D2@{ByAfAPw92glOh zv%@L8mZ#yasKlF)5>)}TXI`!{tRQtIj+hg(ErtFG`cRfEeCURhqhOoWB@^2dsq~2RDYzJeV0!#{ugpRsP?VB+ohE&CAszRpQxlE9I38mnpNm`7TV0 zi+4xwm8)P_Cm|~P{2m$ACy!`NJTw(LHBK|~!#A^Uv%NI3WIR~t?D1@KZG&P%Q4&(& z$;4&*lF80?RP4%iBrdzm;^h33L)D{+wcx%-C9BfV&ep{iGQOIndKwmMLv8~g(-;ZL z%`bC787|Eg1q(N}tKP?2e+^n|GE==TmPP97(2d6yx`?ko&rJzISo5+>I-ir3)>iK~ zv(&1X8*rPd*26gBF)3V-Z1;M(m}3mvuR5uls8ngP!kW|xnllLXkwacBsWI#%Vq?@O zztJiHAKf|N{{-+DX`JtphXAnHMw+ZughK&5Yv2^sw6@NFQ#!F>vt{>Yo{>O04_QwK z#OUeM^B!~Y2i)m#&^KOE!**7%3?Rz;%4nb8%ZkI?b<}?9MqUgsjdZjW=%ubtY9*Vs zuZ8WPSfhNsFfLdoODv!~QAa_5ye+qC${iQjD(8lT;a7PlwfF-lrc4ctUWkOJGYp;# zD&kFzJtePWbJ~Sa$h#|>W55y?%G<7wu{&#g^|quty28bplP1k8hro_w*i+QvZHh`N z1mWg55&bZdpA{#kKk}cfsv-GJ^SuOj^#)xFy*GGbI8-CyWewq-Bb{vs+vUO z$;w>N>bjbQ%Tv=3T_m%#Pb#t$o?LAHWjqGJjS`(w&gEd zs3FDhGZyCZx~=)jCHK^cB(UUrzU^--j5MJ}kzN03suXiQXS~~SpjyHk!}0o3>Rxsz z1q}y^4DfjNN}Cd!WM>bKZJ^qY=We5AHl78UcTZx7X_R=TmoW)y+<5CWHD24=m^6`z zOIO+d#;Gf-oRr?Q_Y1Sw2%uC)?>{$xu_x3WSQz zEYpD*O>H&$EYp*^)ymQ+{N%c{Kts*=Zx)vJ?Zz6jQYb_5#4_5r_+iGH-HnVx@qG4W zbAG(Z)ExVZz9t2)QUXJZ9>5ApPN6%#HI}PSEsj=#9z36(zCUY0y zz~Y+m2)ae>RX#=JTvKNzrjxrH;fg<&25hZO1{qgah^l$k5%)}{a~3mlL58ANlTc84 zx7N=aYSNHvwwT+kCaiO&fbhki(d2UKqvEqGJscjl5?JGbC+0rQaq~V{jFIN>1(U%4 zmI#sW0t#PlwTgzZFK0CyBb*3vV-29n#1RWG{j&!0!7xM)azXAyo1kj}RjsNFB{;VC z&H8cW3m$GCZvzkq0}BIpaVzyh?%;LN;rx~aAedO#(hqIwL+98!zF_HI-m0kj==B_= z;r0Auew5@*Y*^4YF|n<$1Ea3*O|@vfaF*uwUV%DNuZ9Y$V4B99P_jo(6OjC!v$?B! zkl2otNGhRv>lbH;7aZuorAY9pASYlSmhX%7-BhFU0STl!k8UpRJEgf4r0w+g#REva zky!DJK@6?T523}CvIRNu$CJ=XK3@-_i!@rUdTp*HumL(gfP2)&2q1GYBjs;LWr5@ltuB0%|ohSQ1pzS4l z7RFTKpHQ*1d%4++3t(xdwO+}Agb~!?p#n*QZ;>i@y`0*1_TLQ^w?ji3%{1m<93$yV zdosXd=-LHC z$Q-7B`3tt^ci_*FpPxXIxs)tkKkOW=rOwtEYnkkUH?x=^1d_fSW6V66MK zbQsDh4&HhWH{(5nLy^?K9mXV(AU+g2tR5=Sj1lkG+@&qml zGz$f&3)6}PGz%BX1ftw1y#vlX(|Lg#wmOgc#O{VJhU$3 zV|Wcc22?W#Tdzejw_9DLGhbV;AlY$ zys8b-p!IaEWf(ho42>?{nG*6V-ESkxopo$`RxZV;8GB@w$hy&$%fb|`RsnYGM|BFr zdY4fj7$q{H?ADteU!xAiAb$=gyj;eWJ`n`JUKbW=@^Dh*354z|K(@Qx75XhGz0e_~ z!DD*;+&WOGA~+uh3H9SFyc7zZ?c&Wb1k zNFu5Ll0=bkkJLTS4mj^Az=_eq5>yKx*FpgfUj$4S3I|829tpmH1MKw|E{XH{gQy?> zOet+By9|>%Lolq6 zc^PLc>w_2<$Gccxs@83p^OAo}w4xaq>wvL3gn5+RyN!+ZnNsJ99mNG07?t^5jE(Y3_s?nQ^*Jd(J zzj~|zVuUJ~M=1-26c!@zN=PI;+>Yt~J!^#r>L~W49W%AG?n!F9D2={m32&Qq^T~2J z=M0nes$Gg{{_!Rs>gPh$qm<4S4cK#Lq6m`}qIhgHp{GceMVCl)K8OyDWcIAz zlb;4c@PaxYzRDTw0C>FFCLq!)0#DcN@Scp!6Y0wIJEOlvsZBl`QP1SC7s zbbH>v1^PM8RT1E!tp?Fo^Ull0n=IxW|7=asB!)5tT0ag6FdlR!&74TPxmU<-d&!jC zTV_&9F&OSLT@5b!3dQE%ax5ik7ZMLr{LrMlA)_4?gQyA-Q znamI60m~vu8H~B=@%tsXuR2zoJ6Iq&7~#ypfPJHiah!Lwc}hr%H+23@(~ES;S426V zVY`YHkZ@1==BDh_DXuX`B3p^ETE&KWWogZ0sX+;mC#04mje2SUK6K#3^?jN?UN>7n zm`YU=D<%(SM`8^1r|xTUAj?Wus2z&4?v>D8`;6c!?INfNG77pAyJ#FV)|BhMao1MzgLf^<_um66%DcO^1r%+AYebo_H7eE2F6c^4#fye?7;)UjAQi zVL;G#1kO~~&n&h&S)@iD%vP0FT&g*KtTxMMA;rkQV1dg7_I8=9Svdjil+fMR>RItV zaROejjKDJ=|yo(Qe=l#51gmNx8 zEHfDsVvV@d;E`NrHEkK?$DmQ66j3~PBrBN@-q7bX-=-@m#d*nys$S^DV<&Z_fDLRb zXE8JlOY1(VQJbd)swNFB;+@PXb3nDy`UUO)^4vb-Cjz7rm4$JoF?~hs%z4Hp zU+@poC>+T$QPHDFVY1jP%R50{LhtD5Dk1`Bj}7#Ms%sH{MV`y};XINFBN@Z3Dsd_k z@Nt9>U6G}U(}XE^9UH1*PTQRLJunGpr{&g)alTFC#fD<#mP`iG zvOePhkf&`slOJJqqLWRCVafaONcr{1f1f|$veJk&IIOwIH$bi=l*r<#4-PY@-uGhH zqEYW0%W@l00KE^eFb~eBot|U+fNUqHGCrb}lzMV=WOKYZ zctfXi`Lil1DQ^m7n%6$)Lb>w=eb5iU?)9E|zg#m~Llvbel_M1%{Nrkg($CPgit zu8tbBHW`D5s1(tQ$71Rx4Aw#>SAE-oQ@hLMRI;tPvDAXfva-RMlWer0GJ$Q^Ff!GN zF3EUc(A-K5@?J?TcC3Y+O*dfKGX)?*Fg@SMlFE;Qtc$|3?(?-#6|5Q}vAWR282qi;7#T z`*N_H_i_|q<4RX`9;{zS*2Bk=uFSg2NN=p=VU;6FRe~G0`Sjn&^9D)i-C-QFXZu!r zbG`wCQiFl#VH1%D0*6S7hp~dH-0bKSM!(NpNIx+3lh6|lz$@`+o-xDcOD>29V=OX| z1#R^{yQq9%f_0sx7k-b=-L(fGdGZp9#=CYi2<4N|hlUDKV@wGNs-6cGek7mGBB4iC zTA|L?!)5^io<;MZx>b&B68gLON?Yg~#RWj0{*V})=B{<-`5J2B5)(m>RDr!m#=NY! zjkwGS(>-RIXS`i{&EO&aQ3~XN@zdU&=X|ySE}85)D%JxdPCV^kU)xrB4PgM@(8rpb z)W=%)a7nDbok=2#TJUkUWV#{P#zz|=n|j324Uw+WB`ix2+2h)l{5fMXrhQ|@7bt}X zZ`v`N#rrE`lcU=;!OerVJD+HSPp#Ax`TzgsYj=kCI*2YpFJO^0j zal{i?{_2w!&x^kG_1=WXIAMC?U9GmXm-*YuHXma9h1v!x6A}rNn7xZ+T`yU&OHm2+ zQHNI3xmBm2EvAkgMa$9wyQx`s?X;*Y%G6@-3+>vnL<)?K`|iRqL#wDg7LkvvwD3DM6o3QS>>16>p#>0cXz3c? zm0F>|TTR?o451RK(_| zUwdnb=QT_NTGWE2W|or-v>uB`;zFzXcw~MAUP=Cv6$9a2$Qx_h{kOS{$Y;n(pFa>F zR26Pee4$vXXXy>LmR})6H&i>G!3V$iy~s^|Bf1@V>8YiyuB-t*lhpTm6Xf^mlX@Wj z(DB&uXxo&$S}V41U@9iS@)%>%B})*4W~o_>C%I9|HS5n}`$TFg zO#}{R@ZHgnOndE=nGaB0fG~#7J*F&QiStZ}Gm|-Nsi$l2>ID5)dE6ZJJ-ob6+f@c9 zZrcdgggWYe>L@Ee&wj31fcpV&Xe^Ypr=*uD7@h^yPH6^4+`i%{p-D*uzk+2w(+@&& zk)h1Y=BUh`T-p<-Bz1a_l0iDx#WJ93jOcDT@WW6(>vO>Xr&*D8ujx$Z#*V}*oVnxB zk$K=f!@G$I{S5sl-hXrk z)&yI046TnWF4mWrXz*#8R3NA5O(8f)aj2O^=)nnai*?;(Jd)*bK>5(Um=)O}1qB73 z52$AGw3=&vwI$1YAH**h`B;kYp*HhAV4DN@i%A2ebXDP8d$eVkKlR(blNY1{Ks^s1g7BS(qC|riSO2^ zp?2YFg|KV&a+dzKvVo>rz5QnK4va{DBXGYjj*3gn7EDG5Qy$h6uVs8<{N4+f3mhZ} z!jhX(2DY$4O)Ayk1+&W8eznvcQHs=z4wBpj5oGezKF$` zga+S#q%@Fa5IYYT`4Kx!z!xt|7AW(v*;DwJAnW;5THF7dE@LhZiYdA4k#-6{x@nd!rUisPiX=6Qe>lcIUz>Nqd{3;a`p zA%%oXn=k>5&0xvLoooPQN-7|p_yXg6#VCJ;T`rR97ktJygCRb>2^sO*qTJy#P}wJ? z-Wwtr+^$7yirp#skONZ~8|S;C1^F`;)1`LvZ!evKxyRzQIC*Om@d@ppWVIi8%E%{a zt;*tkRjqTb+hn~wrpsyX+JG*&q3H?N8VEhMU9D)e!u2FvUKQYr0F`F{Ci5T3Vv)h+ zuf-2&=S?zhRCaU{);5+*r;+QDpANn(KFJ>NIL0AF1qFt_8ntHiHuZ-~EsCbbl+UCw z@_o6et-!^ruhN6&Q}jc$ND& zjAoH(q;tT^FR}eGWpvS=vIi9K#ilF6Pt8dvEg&702E`MK zWumtL+zhv>q@xXS_r><}DxU2YM%A&obKFKkOhTDwrZ9cryHLo;?d_@>FI@axDmonW z;Q0-9BaV3hk>#t5wtKs*cu>Q%R=z;#q{L2AlHSwb6$2*zaS-e3(~|UqU7nHP#|r0j zTT|B)`S-6%TY425hB_$oQ4 zM`n}+GG8I+6!ZL7zSp$(F#6Z%nmePxUlXO^_^ z)25WqJqwplmJe&t1Dw(d1vy@)FZp1_ewNpm#XkkDf}Bj#b<$|m3kH%b|DE{N zG+j5%Oub+s$?`voxatKxNtTYLS~_X}PE`Ag-hU0nRsSCy@PE|)&nUx(;{J;R{;TT$ zT_bU)Gl-?J;_Nosxv$&8?re6qoHWAGvR97sV?of(6m{gZ38VYtinGdH^IpNO>lkeJ zK^F4c>OodZ+z&Gs*M88*QC16Pu9uya9&ooDg}>s=W8^ZX`__A$g&cYuOWwR^*S(+h z6hL;eWE^O~yfg~}qE@|^_9y~AP{(rR)Q+PXw2D9)KicmwuKNs`eEkH7AR{L77V zyU>P*xrd!PneO*TFVSKNi*G)ZnlT0oVr7rV>@l|Fm&b z>*IML!CCDkx|hZdqJvx=4wp}zo3~*3%r9-by%+fs-q-`2Y2Hky_ddT4rDSnDu+%t@ zZg&jt^CbYXKf&RK?Zdxf%U>~M8k}^t*mHE7<$coM+Ml(73UD>RQh-FrVGBi8{jsVG z>Lw;xPBUED)7rpcr&0Po;k5YzgA~&K41vF-kzMw@R(w+-o6)=;p8+B^3ERJz=#$&JU3KkaKtiKW23c$&NAt3p3x359PnQ(zZ1J3;3o|cZ)CKw_8qKX;gBFZ||6nBHHmC$mdV7 z=YkSV@dcyulr=6W(v)E?C>EHUgzK`D5=!vO<=Eup^uJtnDcW?Jt)@~@%|;7S+^+4; zENlQ*6qW6{MGjKjA(`d${AjhqO+nFj#uCnC%<_ielFVDO94U@6tmVMa=FuL?d%+xB z&Qj&Iz|hADzn#u!l5##<(%$mQm_E>&(PZQ0HxuRG0j#ba>WN zWM+9~{Jjz+nj^ihU&MJ@`4@#OlD4d4Y*SQEjf5eDxw1m)*ucgw=e|3wB3N0cwmO!W zd&^C==wwwX&aQffDo& z@5SzUN*V^F%&_ZVPFw^RKrBy>^8Emt2Vh1(g&Ly>JudKqC zD=?qTX%%vq)+R05k$&XLPllM!2Y#}en2S5TB2gNOCV1*++}GG%FIXnwJ-qStkVYc( zI4txo0*=p)Uj{A2A}2dtt@23nE~X6n{V%^@(2XibfKBC?B%a}l?)11gNMPTcrRDQn z<`Q(rE)d2gn8)8@ZQvvUtd*njrlzU)jLnhJd`>iZzq`_N#rj(q^T5VI(ch$2=vjZ7 zk*^%`ES6azaZg&`6ny;^LrEQa!!YMl1k@W#)hVON&CCkI zS+sxsb^G;?-;Xm})BU^%F`fa<=tdv%6Z?}8gT`0;#L!AQd&Tp)fkB%XU80#Y`raH%tGp#<+q9c11>wt8PBl;u2=T@DQj=w z;Fs`+!nu1v`{27hFb+F!r;*VnGe2`UKpV5z5d1U=G?I4AkWP6WUWiKC=$^)Xz}@ z4kCiF7!J>F&f`y$)j29K7~^C3ao7^?p`Q?Iu}@Sy7ePaVY}m#Pen`|>;Su9kc0mGg zX`jF3+uYn8R~9y!C$|09eOYVmCwGl$B}XR>_nrJU0jssXrz0pBO(rx$>K@5%dv;|l zvk$FMn@R8E&s32`qg@WU^cmQuH zHw@X>K)VWOug?{a#ts8mV_*I%JSw^TG>S-8x1&01-P41mqe~OvqaxO zdpg3Ou6E?5a}?^(IB+n_;72$cg=OV`ObYV>%FZwS^`*g~Pi(Orao+=U2fndSio!}7MXYhgG8l2$n5Hz?axJv>A zC%6Uz*-PGUzunr}s@)&cw@>$JnW;P7N1oHINoNh%QAF)0-f!9*D&4S?!A6QRVAn6l zc9ks==-_=~4XiM0xd}6d9K2+_E;7{GSXr~M#tNft`k+obzr*y zm`_NW({*p$r@>KmexE8KzBqbZlB!4EH1r_C%`R3~9Zv-~avJzRcCrj)yUy8H_3#r( ztWzJ2T7Mi%+dk@}oT4=0Ox1EC_+%~-(pvGj_%ul)3G)8@HEWb2DMt?}xNPiB2L)OeKW`884xXQ^O~U<<+2~ zqOQ}V_7`Kf0E=p@MU^)$qt z{v#g+q?za~=I$ik`~Lm1;2etp|9VvB+F*Ui<;8oy8jW*B zho%5rUBuyKktgWwQVsKdeZ_>+$&&R(t!{k512^|GWUU^WlwchsSLr5pzf12)N=i>D zYW2fiEZhX2mlW4nRfDNgE-oyxh>&+nszg$e-G9!KG~-P~IJASp|IOlEXgG&lZ&0Z~ z=TbrfZmYlZ(0v)72p9N#8|S;*P$r(;masIfaKlEd3`3qUbP;B7czsrlywY7AnKk0q zdj8T3f_x`ui6G=xm z{4W$D;-q=_%Cl~&7bR7ihmg@(9TFRIOOEB@Xle)5=z|l>x?gfL)W|Moer_cSIi;mG zEt#HmC>OCVuPk=4E^jR^lwHl9IwChWoKj7O+!V^4!8u%U>iM8$e-5Bs|EPYU{Zn2_ zRQXPTQ|JJ{xycy&$bVk`Rb$7%+o$@0ouP=^IJn>q zFMYv@m-@HxFv0{jhTBkA})&HTZ}*y zh=ShkkkE*`18&J6R2CyPB^G1ee0TYs^klkWJg@}dzKfpZd^JDUF_OGhB!EHj5H)^Wkp?33bV zTl9kW6)%QWu2E*J)=#m^HAe4vr`(Qh$W40mO6oh^r`*rJCo-!SxFXn-HGcs74qc1D ztEC|sx3c-I0_?di;^Ezx`1dw~O#kTWLXqdy?$c3?xtOktxi}>^zCp3ld=9JGE2O-ay<8yLg zQScf^1uTpzUlwHm3!@vG+)4fXb0z0BdPhDB$?C32BS z0TFXp{uQS_tR4B5upEyS8(+gO$5p0{65Ibz99dR7EpdXIjz_c2G55NIj)woA%W?`@ znFU0ORjR{@x!9&q2<$%eNh=Pz>#5y1l{c0ci@>NEZ5P=N@1^t~h|vxT&4r`T!30%v zd!Ej|A;qD}YAge~ke?I%!t7Q6FiYG4U!53-Imh1H^oIE#js3Y>x#~Aup9z-e*OM%{ zy_5|7!~tubAz;m;(pgWa>}+VKU3|9a*0C|XobNR@qb)k)q-;4}L2lm6vJz+Ene|!bm0`k72Jo8k7k7nzEut9llC0t5~`vfU9VW^ZT;w*V0cUvR zx9YEN+IU80%~Sq|Am3a&c5Q6$|8|Ha;QatM@cgV4S*tn$3b{u{8!$Qko9zF#9t3*- zU%da5=U>DBCeqJegYo&thtut@t_%+2{(BVSFsI&sJ^LFLy7cyG{vWe2uBQE>o1Q5H zriLUlS+zNbW4sCDtP1q-ThY@jOYA}E-uty^*_*eJQ_8i0DAbGqAZnjBsCp~(m%8-} z7u=0QULe;H1dJ*amHTj^BK?Mw+4-HcQKnZc&9Q6 zM%+Gj$q2!<^e{f9+e*sS!b~2K^-fh%q9b0{e&UQW^3WCPU??a@$8EF4FCX%k;kqZw zdgj;zI0Cy*(TFv7`|)ea!0|s%SH2~wQ^4hH*>`TQ<|FDUWc&?b0VO3Gc(clOS2h9 zg#&QJoa$||RkLUIHiQ;DF&9QEcDsrh?(~7@vFaSQfkp@ENix=b=2q+t_XOIoOYM zbvby&bc`8p0&7mp1@={oTIScq_CWhj`U-RoufM)c6_s3dAo~DbK9G`)2=2HH$x;M(|?KPc2)#_3wKmC0UG4?`iT0b z8Z;*iC+jwQ>w*0*N&qA}uo~aEp^y^cEhifS4%+19WK&D_U!#>PiyX0HZMmOkGES|U zYxRfDw~amTk+yxtYlH*Sd6(HMReqqU=X^0uWJ?@QcIe_db3H`x^koogDG?5Y2al~m zFeX2DH@OTIs|>_9vd?HyzY}s%z7F~hI5Y)ue@xWKYl@Y84nTUwhk40n9$I%5=Kz6~ zuWz0!8Wp^6%Cz&G%3ZXtcfSM9#03ZZ`rH-{hgx1ggg&y`|F?y`vk9W;vjj{t9+(gfOxMpx>_|SFR zx`=2D*Nbc2&yDtnJdVYXg8p+&;?T&{NF7cbi!vaYZ^AC9$mLS5ijCg);{uNPD0;;t zYaPQqO3NJNSFRZ~pSVc)iIh zXtru+!q?w2&kGpu9)7L*y9s6;V}XxCc|PAfcLOZusXRk7E~8`@F>NN8(<+@4+(UON z$O%TY1$^kW>HNjg)fB-5=-d$=azn93o?1O1_;wiFRAC0+KGEH42KA~(_u|7nMb+c!PFzkptHZ(C>CEGY{;emFMu2@mc9~Eg zDLjWlnx=eZspWnu^*g-mkoL0(t7Lna_Ce7`)>X$vr-?O1iI?Pw)R2R05{ycJ{PYn( zDtNqnqJn#Oc&g4v+|ix#dld+Px-{lv^VyOf=!*Wz**kp8)((3?&A4sx*?$nF@I0E! zmz%CYE@fk^$ERVRo$>A!oy8oL;VtQxubzjV5P$knX~9x^x`kObT?y0a$Poln+z%sE zrs{Dcg7|%Hwi6nr@6$#cP3tp8B23S-NAgWyFaQ+Xyj8V9n{9@B`5FuFEXs#Kf?mh_^WzN@dTI4rvV-mDno z3bDq1s8~sfu)5I>8xj6gxTtMsVPon^|Eu!tKmgf8g+Ict$`kd*+V<|0K;Y^ui{Z;m z^?D^g1=>+TJq51OC4B|MlMQ>!#Evgg2hD4&af-D&CvIAP$0ynk53A7Z?1YKs@<+cx zbNr`Q>p`xAy$V_rM)ck|tj2rS^*&2DZIQ3%h4d z3f?r}P$+!`kc9hjcQ@cV>i;p@>pu}rq3*F=EJKf@`e@#c3P zm_z!PHg_0X2`VmOn|Vw9@&*ggPa@?km(1MdeCDdn_hO(UnUM}0y2IB!hU%W}acI16 zfYak^H{jsary=zTdji_k`Y-^ngX!Le)_{>+Zb&QhBSu)0cdNWM$}x@!nJWEK{iSe_WsDQ8)Dx1b z2yTPH{sDLKk2(Fp6?wowVrC@jLK>nx+DbHoMMp{ukq7p|4dwLc_n-c44Ib}^@I-ZZ zY8a0P8vwko)Ll)AcP4Y{qpeG(rhdnM5XfMHd^TGooemQ+fKDPQ`OYU`55493G?05tXhVXdSX_@SOj{S7i|F@pzoYh0a)f(Wv%U*^xT*X zz#FiuTxSccwAoUCu$dz=OF=(v7Pz`tGQ>V2%F-cQIYd-LAKbhOHD8#$k7hd1Hg zZNM1;Gk{BNkjoBz(%TMpmIi19*yJ5!`RKI)2hB%6A3de$q-g8x(|+g3Yq2BcHVa#7 zvJU~6JlH<{u-mR=H3@+J!2Rr7>alA8?BH>1t1p6Bb-FY8~PK=;O@o(vf@QqjcO%@-4_Yyv@ZV~ZL z;^GajSx&fLEIlA@;WY#j(uMyFucP3j?MmfHIInuUNU`BHLmFHYGI^|@!Sy?(`7@tB zHc9!lenx>o2K3wD&&TAN5En;Ad+Q{5HTGEufHiB-Eg288MNo2+(yya1+;2w<0|Nq)d-+COm6GP|alc&^90 zc;SOJ&LdBl@Q;oJD_TbhCJXWE!FSf}a#LH4yg(pb?$*5qu+uE#QXOPM)PWzG6=l*} zLB(fWX{E0pFer9j6l?b-n`W|f{w-cSG1#h=0Hf-v7P~F9Vbl7Rwq|Sd85s|Z>D%?s z%T{I23;iRep9voH)^-@74VEr(eV^mcLpq(0pN!V)&>Ax%6j?P$bVcGYvxMsb-p#{Xt>Y^^2 zhwR$Vc@wRF6{i1)T;1yd2*8&7kNR%#uWI-oL1j_}w0QvX?(|gv)gD}P54e>5h?41i&K@dP+Gj;cq9LX-U{-8xziKndSYq7 zf)3r0VMBsX&P5xJZ>TPCMZt`N=%iHX6IVRL@Iq;{kw5g*HezqpRI!_Mku|S*-XF(z zZ11Zf#O0YP4gjckPOl}zO>!>u4HshoYsnUESJ_fb(LX_*ANxQyZ>QXWJvR|pOeWj; zU1&$8^=h9%e|lL;3qUy5|Cg8!Na^C9V$}XSK$^D)tR}SPkk3UeoPr~o5GarC0=r+_ z*ILiT@DCHOZaMd6lZm0@Pna$QJAd|TzwuCvpLKN4n8BIQFlR| z@}{fYHN1KRixe)GTW$~rBOeq`aguxjt}f^F7Nlo*L03U)0LyvFp!+NDeL_aP(z3K7 zrKb)tZWnz0w;?~(W7Mn@-Voh4P6(&4tpK_z63_WJ2%?F4GG1<49Gxa36wNOuvbUx? zAI0?I2XZ#gWCB)i;0<`JgFLnv*NR+x#!L4}1?0ZpBjJn5MD|2vZEp|uxJ=Bv;w6D> zmSXA=3cn!OP7*Cd#I&x>d>?g7XhSnY|K^;9Y0A|!*bOpa*5B!|FnJsS z=&)9p_j{a9Ap!KFl=eUr8MuG~w1k$2+Zy#t&TC($s$LP(v953dUeZm&srt>$8v>rf zWN*Uy3G;{0h)6*}VTK|~nHZ42+5Eftu(oe#cHy|w=wGfcmRgLa&;O9iThrr10$%3* zMYYxqM-*k@xOjpiXDuCWFi7j9JwaS@Rjez0&9@jI?^CJCS(yA~9EWT+2_X z8hNJQem&8|*N#rt14R`$%)t*Lz0@B~XleZ81tOltca+Yk%fhG3omzJ{vBBL7<897K zvKULHHCnZ*)i5K6F7whPYBTP8ya4vFN>U>1PxZxE_!e%&b(f>wtny#rlPW@%QR4_) zm12(gKkBCHXHMa4S!}20>4D_{$O??O#uxv^(5po{uC{G@OHxiv(!aK12``ctC`sRO z1~ytWD#;OFRPid-vLgL*L@yA29EeSSgy~&22$AO5i+C0qOGu}o@E0ZAM&+p(1NV-u z93PdQ62C2de(Eks4>+4jJPx|PO6~}JykejaJEEI+$7{RnJ-(yzBLWrZeS7U)5E@;V{Y(4gVZKye+Eu7Zy~#g z-5%G`&PoWQh=CJju*FgS1fS3#Q=)X`!5F`3Bgl6jyx04h%vk0lwU;|h-W!N)kb#Gw zc~+06e;bICgb0>eeX|Q4EV8wtV7Li2!;sa_?p!IBeLlIxv8!OD3cOFE4qn34WCGQlSyF~&FajPvqXggh#SfD8y06>EI?ho>V^HF>ZUawg>3TOs?uew{+R_HN{Lu6Ggp0Rr3_*VmsQf&V-wH#O zYGphnpkRFZxv>1Ho&woF`lPxCDFoj#&px z%!8L&kk^&MfmBC;=bG=TefA|;3r!;9fUQ_8f=etkMV6+~(Ga@qWPw26^81g?1{Y?$ znOVly-MadEr(3LhDO?iXNTz}*LiiIPEZKmdVR5$n=18_G3i)s_s0*fwx{2%h_QRq@ z)T19RGB<;X`t@3;;>qF%AAj0TQ*O(vf}102h*7O2sf5zTJ0b+P-``UgUOc`^C$hf!!za7p;Ha zV4UPh4m#i$zL1^aIuyo9`zy<&#WHyi zO|b6WCHqG8at0(huZ0qdAu61oI3&La1S8!y9oGT){8F*wmnK8}xn5)sN`t#&vnoGx z1*S^hU4AH{nPF2E!AvTD+X}6+Yh>X#?N=xz7%TCBTP^zVEj8=|$^n)Mt~!UtizS^_ z7i9!u-QQxq(0A!bW?*heb5E}@7FA|0lHbe0UsacW+c)(wWr(pcp|CdRM)4>%6ghh~ zG+Gg3`OVVcK1MW=x&mdB%#MWjI9%L49nHx4^j@ac-fu@#I61ddl)^j>`5#L*o%1C( zRQ(S^^E=Kqo5Fv2%t`wo_{P+wyG;dP1)waW-$<+IBYhuiQo^HyaOpfsM@KffCiGhN zhk6A5wbA)fz({ZIl;w=1|58D|h6wDHl=b1tik47S^`!#>#gJ z{Tu)y7%=jVg|+R{#lwbYlW1oVent`SBt^I;A`^XaoY6qLKMjTI%wAu?J?u0>48v)i zk_#IyECGypDXK>amGbW>ovIR15RcO4B4PU~ClymzXv$sZ~(x6E7A0 zimV_>CQSM{fTvZB6tQXiT0lQ1i}`}n76uYsTyfnDT|iLpk9X>X$Ax>9kmu*W2_P-UDe*?K+N_- zUOaq^DCt{ivu0U9yjgbA%#o6VC}PE8=X?NKssh^9%6HAOx4eY9XSo;a#k5;$vJ!(m z={oc86+c*}g^yKEL2C71RLlefhi#@_K8##9MX3+mAhVq%T4y;p+I;$JEm0tP1sK&d z{FdWcUUxx$$)(ho+|Z91b3foRHl#m(-2}?77X6^%Pc4rl7sl1v4coe_@f=r+H}vR_ z%{OCiR@LVXQ-9w?SV}bf`YkQ<>F+DBdQxCuIm_9XU1frMhlj-QC*ZiC-yJQ~`fqES z(K;f(sT3!!3|mf%vz*;LEe+`!eI&RjTx6W%stq(bidqTz$p-%dTcUa^>Na43KlTHJr>O7s{9oV}1mkfzc+Fs$n7cN2-hqZ)b0a z8>bIDkAQzAsXtC965;?(_&ZXHRbD$qMmiM``pYYIvCS#b-TcWjDyZNP6w~|&D zei|+IDs%AJIu=#G3t$BER6%-ALA)`c19Go^Ictb+z=+s$W{e~`1%)uKG8Y))X1-qJ z5pR^g4e>^3Oh^G0#t~p}Wmy*?kZ2d-vu{_^&0uyexCJA8(3frxUPRNlBC&xxK$0;w zkka&A*a zd~>QGIv8(ARr{*Yu&I`@&@iy|1n17%`G}Hm(y22o>3b#%H2a&|bW})Fg{;7t0Y^LB zIb|Ik(Y5@XCc!BMnP0l`&$+%1}oK~Zv2Yjt;LF29S0?c`%S;k{s z+)^8cXGQ?CAb$AUT`%jfx9lV^78oRpV~n=_Pz;YMB`bG14+~+UA$XF=CG~f{S$U9A z@VN24=}1c#ql(|V_{t}71=jP*>-nkPAh9+sBru1a?$8Y;OK;PJLx=nfunF_~v`e7U zjVXF|k9blhLVgvWiN%-2mF|{B*}M!l_m2KHS227Yr8{0LM0OQ+*AZ zTtT;WrDVS?6rSQn=d6rDW1kH}PQsGcyF}6tc&b7Sc7Qk0;G7~!2&Ia5BFICUMts4v zonNbFKFUozoB#TQ2^Qo7t7U=ZqPQ{w)$*SMC1#?U10qlAEJX}kGHdvFjfj#V?juP4?9O}#YV_! z<=DyR2+TJNdsJq#J@BP4J8AAJUCduI1 z*)XZMD$G%6Wg8_vO9kacXHBxGKn9`g6uN~(F#Sq?`b8_Y42{(KR{y^lN!K6D5;1O= ze<>&3Yn|TTXZAC>S95{DY<;^$s->k z>g7y(l==+@EcqUSd}IuQo?l4wHed3Fkj_}vUGnq3Afd3Bx=UQ0QjwHa_L7&~iVPjt z)xEJc9L`BYLg%5x96GSAgCK2Yt*B2-;7yl3kjBhTn!Q<_FuQ6^E2RZ3%kZvYA@H^q z3OiO8fY=^Ppa&2h6>j*ZSb`UEV8>f{Y%R-29$55$M8@jY66Vlexl$W;iFo?Ou(?A*3S3HwX*mko<)|YB8!FbCnbR zk>&vrjHkwbZZFk7PVmq`q_1s7*ju^E9hM1Qzliq0(X5(LVJ(vK`n)}amoJxT!#1E9 zNp+-}S;UlQ?({U!otq;;+=$^5tC;f0NAr3g$wPIgu1wzf`c8PNgCj{0`v*JRR`pJs z!KD6af(+a?WohAvhEmBVc?nEe{(P=^f4lSu_uG}OCWJEb#{(wbLMNsfRX$vB zQM$ZDmyFs$B}9kru?cUvG#H#O#Gflj`qj&q;Oy_#Ai^bTL;Lh_aFw&dU-Zo_x=& z!t5h^`WQ6aJ|#s&1a7o4KM93d^u8+HB!b`A84g5-gB*+Ju(vku^Q%KYzeSXk`dcKX zt6kD1?Z&385S;%dj1PZqM8}}FfSjrN!My)N!QZ%-hN~J497Rm#`f;cb#Oc!bPu#OF z^OfQ!+~@oE!|I%DPLYO?p||n1wtxPh4NcbS0gu7>TD3oS|K|gnI(is_$0@2ubD;PL z#-}~|10sW4R!10sFLQqLQ45Zny7hGg+!;J-!b=SKDJVgrXWgxuHayeUH4=;^Q>Yp~ zjSVN*#|_UcSyJ-USuz6Mm!2~6Lp4(boPn97n=wxz;t%z#E%gu+g>icZn#>_LW)T}T zH5Y??ULKAFXOO0=S^yHnO9qCtpA#%%w+B{no+7`ym;Du=ZVA?aVBBsC{chWuW0B~{ zR^C|*#jpE=MyIw1ghzsQ5#!v4I$<@CBCP=KIfNpAa)$kr<*{Y;ts&X`U4Lw*UxPv? z#!8Z{x4wPZL#_@H*6$M{Ru$jOEY+2~plT+d?73Iu!bIaCB)f;Gmq@~!e8DL9$x?q= z;p;Gs0FD+XZ8w`gg6}HXWzA^ef6erMWd!-)6=>YlFf=ASX9PH6JmI|RRWIGwbo zoot2uNOYp{mOvv2{#0S#qY*9+X=@`&sVbcjk`e8xoatgm`2>qk;EFhDYOdB)&W zES&VYw}sK_OULMQJzHHwG9qsR-E2?-XVSSbnFAHxfeSI?|6$-tn7H6E+U>glyBt_h;q+q-%yu4oSK;nvH5w;dm}#+y2p zybu>(LT| z^d+rR)8jto6QX(8%6Rw$%HpJpcl*tF;g((@-9N~{5BZv@B^DLTOE~+TZQGQsxrra0 zi<1JakS(Wmj&Uc^v&=EoH0D~zD1Mqf#Sy(OtyCRpJ*lpyMT#0&V!A;m1>^a7rbv%} zc=t;M_W1a|}O5B<(mZO7t_Br?qP3DZIlT7#|*x*HAB zN@74baDDL(BG9@7O=0BJe#r;XW~nmF*dJITyDP`h^Ru%D33tFjtHIlpn5u6OpdMTm z-jc2ei}N39Q>;Jp+mK6Vr+jj*x&2Uf(8O^!Xm0z zunyTM;~j|tYe;StqKec+mF$WOnmtLZZb;6IG@?%+oiGV1okG6&ZwL}{z3NptP$E4K zGw&kXz&ZN`3FVNSd=lt!x;}xt9;y5rTb!bgVr7o&^nn)Rw=C0Wz2aVRxpz6C+*;7GYrV9B&v%JD8t_-7Z2lI;xHFw}jKues0&(eVY8MJ~J~_$BW# zBO0D{ ze7)SkEOyk|(g)fql!0QaNzES|FoF>a{4WiCD*>btcE zcWl3W?bTPg?E&vS%DQHfzee87=aG-!kVM8hv2y}X4qL>uz^`gLnveno<#!e1=qsTv zcG)zxVj%tER+Cy0B!=@i%o1Eg8uKit!^#+L)h z)%3&j2ND&x_nz~+sMsyQ7{Il0hR_vUYbshZm=&`Ru(5&3=;boGg?an zj(4a}kn#<-d}3iPkQUkrGtjG8E1hVelxLFOtW4 zH=7wO_3~fjw_dM)iBK+*z(C3`MwGlGO8gZkiilfLnF)8_QkedmrYOkim%~Txk%2Nf zNI#;ar-m>?Kux|k`~e(AMYq72AAuU?(3y`=n5I{GH{}WK%TDn#SDJfP^A#D1sIN`? zr8%RdkJ2yl3QY}4pjUl8Rf#46A8qj%>pwK{3G5K5lb#TN+hKme^df&|*9aNDL9KNbU}chB4=2ZEE(%3?SUFZiccHNT4r@lRuu(E2#Gbu~3t zm*avhzj3ePDsTrUQ2dmCWM64s8IGos(|c* z8U8}RftS9fL1!exC0`xRd-P7o$>v2rJenb|gzjszP zICKzQ18&i$8WPiQshmHEg^3`#XWR@=adeV`e<;hLYIh=JVDmHY0YvGI(=x2E?jMQt zEWwQ)Xno%ya2y?~8`mt~sh@Tt+y0WJNBV)8AT~(V-qmV+ynm(5-6!@}!72^65B zV(lK(=1(aj3`AIaiAKf937()ca0QYrx!^LVgL%FFI>*$F987e+tN;sCpu~qU_I{@P z?E^gPu!5W`KMoeoxR~xpWB#3^5Xcr4LSnmezKbgUyU5^!J17Barju}oni=PHT&#@2 zz=`2;`BhnNPF~TrRe5+L#Yl?c9|5gvXCZk2fI)LXJ(D+Y2&r5!2}F+x3J&=joq^U2kHUeRQR%6A2^Y|6Rp9F5Ja zNsn16sM4DX|y zX(%P*3L-M{QV_CNJiz$$<*?zDxY6W@sRk)QLs z3adq++2TQvBub@L^gYG1Cxm_k9TF#SxVj^A0M}MU6Scn(vev4vZ4^dCFM^kMfxDOd zgZS~1ju8dN7X?(nYXzyX2sUZx2WJFZlu{;d)6SH55rD5j1tVsNmP@Ij#x=Y&c~aAaJdbrjFi8F?Dg5CpFmF}T!s_zhhC!LReN zfz{8szr3T^7__F&`6IqhjAZ4}Z6*6B6_@k77yCQ#oIh}UT>E}y@gvePf+blIiA<{u zLmSc-xYNqzued22qi}0B1C(JbJ}Je# zkc64A3a7OKL0ZK?Em0KqhowqEIXG7tTP|Mf^P*@u5F{R3PGVbgF5}BB>)ym@5RtkO zkGe|4bf~(k!KJ;H`%TJ~FCny)(mmi-$BO-7$4pb4biB8uQ!p)5`F9`(a@GZbJ{JFu zVZ)XA7`ZjT_;(Coj86v`P2MTlmvm03ZtR+ALQLL`mz9WmQ<*X6BdhS~4+C9HIBRWr zwoo{Z9sOcb7cB=m^v&S}Iy^PNYC!-$ZJB9KSOW$oo^8#sBgcb^t8q-^Rm8GW5>;S4 z&lUy)pw#a3oRNM37eLOL0OV*-%Hr}&Bx`LWBgOOZ>cAjrb8mresW3C~1eLM@n#ycB z5L_#F{&dE@C$=9s-mw6oIZZE>grkN;geo5yv(Ig@d9C)q*P4=GwV>ZU+MW3Zq2OS2 z5M5#Abi-HN2p8tG2zj*M2)pDvO4fkT1#8lInihTGFF_5vuPAR-FjkH_g9AYGw=b!Q zHDXqd-h$LKNw%7rQHGTXlW&CaC7IsMnCv0w*TlwXSrH~~w*2&ri_Meb4O9w^O>Qk6+8BUbU;(@AfHU@x7#o3aM1)t!hP zUjA|~f3?fS_sbpKERCn1G2P&uBEIHgEnGjNH=H(nR>xPgYd?WMr^Agx2kN9;LU*qV z?A4XBTR>+EG|SWNTng&8;8QsWvz>qz@=WXnagSX3n6E&2fE$f`{Fv|OG9Xj7{kaw? z^|Df8=a0RrP~k$u@Oj-qT$iMHf_N&g%&U8qNfHW?%Iq4nc{LLljRR?FFoW*2)vLHpxMVZHq;w z?uxn29O8IX8wgJ0f1BL9T%MR=%A&vXw8Y!i1<6~1jD7nKqz^Xw;jbNBfFt=6GbYIs zvv0~zNK$%yZRg#2DzU_ui>+Z@lRtN3AEmL1*X2|KiRp1?mF*0 zXZ_D5M!l&1Q}P5>`A-XgBz7fO25b$3p??)FwjN#eX&>4w2v6Rnr+zWT7H9f{=4R4K zOg-`87Caoen4TX1CbLZ?&ddFyx?=X?kLr(>${@SLb|6 zNoNz=1w4T&^M)RSy*m*fm)OdCSqAkp5=Yn2y}qpmXHO&r9C@ zS$IM3P(bL?vUJwFy%1n8;@XoB3|z?O>&rcYz~7(2=991Zg6;sDTX;{&U<4g_bR>T2oRYXA*3(D_ z{;CIr{kaG?!OqU<0;~Be($dv;%64;Jwfwvn2T2qq`|Jn?7Lq}5T1tr!sHb!kauRf` zr%4h5QUV!_m`eI~TE4CGJyn;gkoxHHHeW&xWc!Wyl>1h)xyMX$J{D?fwKi)q+kTG& zRbuaHN0a4cQd2~LdKouTwrLcCPuLj?&XMHH9*EUAcut(uJ}thU{CtzB&MCVPZUKQa zHw(u8Xz$9jg3Z7lpsx#QCe8l}pAs-hsL=-F4u$$b*S^$~Ii zu663r$NPUng}tfSpGh!VTL!%}Lg?cxNa%JQbq)Y^V&($7d@J(a&z(+(M_1px2W+cv z8znLxQCTw6;?66wrfuPPn0skD9tHSF(*-I4GN%O$(Z6XkGi4wiXlI|UB;rxA;P0L4 z;@@DTY?T8!XF6C$Oy+-si;X#4Xk7VH+8A+u|Ats1|Yr!K0_7 z>T5le>TA#nOH>E{4Thnzz)cEuqs6|97#6%U7)#9uFTXbg&%B?8NBIg`gGCBZPHNuC zyodLe!G&;@Pr~Tn;$d_zC4Aoya6`Y9F#}?Gmi^O?Bi8+91Kfc`g0hMLqeW4>0zu<~ zatBGD^QQq1FQv*DCw7c6(a&3j7=8%@ax&BCuOi_d`OkWeh`lO(H*SfOCo5w>N*xC& ze-myz4~Qid+T$3v1202{#M-c=LDPaa0p0fAIB`-m1M6)d8O1IL?5lf33ot_h()aC z8H)<%1V7~Kl?_h?6LGymI{ZoLi;PvPo=PdWMmys3)O43c`GbJA~#B7?!3* z3x?YSC3UmAH-Ggq{v|0X0%iEK*;HtWUZ$-rg;)*Pxjz!hV18!MAauCz7*lcZCD#!v8lM9~DWPTX(ZmhGKe8-&)8$I|ON!Q>ETaYg;1 zvLn3|zgYFf`T)B_)%6-^TFkJ+@$7FAnyi;e*8QjI&Gs|$C@kb^b`0Zpf~Mc!lA*#~ zf)4ZZcsrP4!+_sXfnJ|INXIqvB_4w9x6)Cl{DHgzHd8DDTnall#X9OL90jV(&^;n| zaBFtKt0AV?Etfnh)uY2Jd3;JD5doFmAZH)VX)A$-n=_ z!kf$qPBAaKva=&}opY#UGGy38tw&3#ESDdq{nSDc`~Y6?BI3Vbv`kzYSuAU}pr7m^ zi{p?e>MM?86u25#Lq<=*rco9mxMk10$PPC6SXA^zRugORgN!Cta~vePgo2Gx`qQx} z-b;v0zRcnD%O2{r9m-<3dREH5qoyPhv62_br>{V|IRxh5Y3ht@*Y#9ah*01Rl4pen zpno)spxs&&5~YoTFF_WGgeSLex;P^dFW?5~*w-}UGEMm5r>>hb?3c#^kIKkxczWU% zGsm{Zy3WhGtmb=KMj-9wo7Lf*4dxX=sJ7&4@3f2+J=6%6;g6Q~AIPZYjNnXpQP=!L z&W6wvpzxF+Gqf}#_%hwhi~uWqG?N|59wFElU5WY6Is<)*456Zqes;aQ*_XOQ3(%sz+2LWj$r5mJ?Za4?&?gjx#Dd}z$ zP(nbuq`RdA(Ytxy@4IW=Kkr)b?3vlKH?ZSj<~P52j!E}QMnl!clGcqs8w`Cil|_bu z9`4$#wD1+pc&B5=TxF46uK~sAy-E9x;DXl8x7mjNj0WM_PuMMK-EOP_b@E&BDvP0< z{BMoFQ8`)oZ@HV}y0ShHRwVkkvUXC>5+KAF*UKvN)oGjlxuXhTs-ox+Q?_a}|5z&v z3s%z&l-9j4QYLc6$*`~5ocHHuj2W1WJBCkuYj{BSq@QW5*LX!gg9IekMepN_Gy2g4 zfk%vPrqRRki*;BI@QmRfit1N1{&%FM#0?4Wuq$Fhgmvtfa?&K z%*-|^GZj7>2MM7+$1SYW=tbQ7Dp(bH7awv&e`&J9NoAax(8XFA6DECk1Ai_`EA)JG z_qhQ9+#%hkrj*ql7#W2u2yIRHv51vN zyBsM&ZWI_$e{&NkAu`T`PWCAF^rM(dvllm(Lv10mB2()SOmpYr82Z`q>e7Li#DZ zZ1lVD3FMyN)QDgFt23Swlf6A48=HtGH<@ezDnHL2MO|8LQBUC3xf+c}zWCe0sM70Btq9Sa;$Z+s|a zl{)I*ROI#zDMOc^SO385(4G}ly7R~W4wD}^tGKEztJO_^PA(WtF&}KYw30|)nmd9ExmNsegR}e9!hrDi zB9Mt)ZsPH{6e8h__8|Owiy3f6mo(GIEEZh?GfLgL67s92MM%oY3TzI5lX8GuN#9qK zSi!+*e0LJU&k&HDdJtEk145O8xf59xS=HVpLj6U2rPo#?2PGHL$uP6iF>c8U?p7lM z4FxPPLqrd$aGy~;dIwb5>t>=rM0Pck$lz@Glm?85NT4t`BJdH;a--+N>H2 z0*2+z9yk3K^22xlnH$-4qR2Rj@DGK9mhvJ5KX~GdddqgpfSlE3yTQaLwjMcu*pY5_ z1&p6fy4*Xd4+htVw1Asu(SZ5!Mfh4|^@EwrFj~_&iE-%7q z*g*g`#|L0@DQ-Ww9KLeG(^&WbaPAra=e|t?;M}LOH#+Rr+Whx5%hInxwM1?Bb8$)+7t(lTJ5T6lwn$g-qsRk7(A~yWlrNqCA<>|4IO33jD_s}JP4@o1oIath$ zl?Tv3p}YrJ{ryT>RQ^7bCWngfiDm4x-x?>)GX#Iwo-=<`_%Xa1tNx>rush>x-=mkc zQrP$3+55CqkIKZ)0HV$Ga2HeCkH=#<(b;rkkYddb62i7Oss7HcnMCU=`iEn#57wYF zkrGfJ^H!}&+jnx~nJR#mRN2V?v+Gifu5$%-r#6Frr4xC5nNq`*D4K3GhzC~GE)nxK zsgIqOHY#ZEb2$7R%qc~)23=`CpyssAYWy5qzv^vW%E!4w^6HGr=6e+O28WuS{>o2= zfVsix$!wbYWZr%QnAy4vRNlN?%o{q))of|3zc0k447bT&%XhjKbTp$a^5gd-Jl?~9rn8rF0*ZuO zx&K#mxYMs7lX_P9vSqoZX?`TbhTl6N-ljPGpFVtpL_-kv zx@}hKXlI=m1}wKVN2lkYGlcPJBqYkEvg6pN{rnX7v)OZg2jFQWXijTq8`4<@o<=!U zI-`v*S)l=vDA4|D8kamv)rsz==#Y}|km^#)u_dwv4DKPk*Y3J;2VEim3llqqKV&u% zpGJ-z&H|63wKQWPoG&R3bZR(VkFWkOZJ)%^m_P~|q+5qC`sagi=|`F5jc6-s`O33; zDkJ8#qY%TZW~vfX>Z2l}hWyXiD@R3Xe+hjh53MBed}|`bPXC|=S4WCz)o4`7wzZA2 zP%nQmG5cM}eLBEi7Sc%<%e%ofYZ<)o!+@0I=Jl2RL!hAw0UWvF<9977Fp0)~rlA&X zl;8)ZJPJ0u`X-}F)#=Is3ZjT0q?ZzXMMMuQ#DVqPKR0r|4yIRNq5AGaO{(pTnaX3h z4Cr--i{lKc==F#2=6JcS#Ew`<$(Gq_Gm7GAa`t#Dy`?~5$wGLHC(fS7p>ePg-nIqG zU_X-#745`#c5pKW(7Prq*T6ciXcYpWo=TVR0CB}4D3kOe&NFrtSFBKjNJsE1$Z|0XPQKO(YyEka#L_@cj9l{TF@$I!VP2+S zxkKK<$SvzLpI5icTLwL^@qpwC8|cg9mp@D!UHF<@Lg1wA$t%Td0x@OI=4R@BRz(i~ z^edL6pE<-|bZZ=aJqxeAuquMxN|Io7bV-v`HYJ7+RMyPD(9EB=DyrZ+uGi2}VVdS5 zb}0LRbFQz$eqZt7DR15@EfcE2$w^XY!>bi^!B} z@5FQ3<{i9$QkYOfxNu>uViS+Vfh<@A2x-IU$w$aFbQdP)YUy%yc{l!I$3Yc|y$2^u z?%WAanL%43fNQ3fQ5l`-bu9WVAwod!OIRIYSb`W^gXO>@QlUBr(@O7*#qk2E9rz8r zsBr%EM{=IyJ8W4AJ0~NlAf!W-86lcNX@t%1tL$FHrSEW9gx?93u34FqYN&LQJP}+rE1adhxp0YlD~Gek4bYamNhYbGD?5HKx_y z`5NeZ3=3?m=YyK1Mn@+8Is|1T4?<_*z!9iK)#);z19sqm$F_l$8WwjlrDpZM5qpN& z4s81JWSt|sI0`E_*rq@Vv&NYZgF3xiv0)C`{!DOffX?QA%7Z)ZQ?_;IkS#+0MJ-@6 zF3lly%~ASO=++GpCuqs3SmPDTw>`mEiaiP>Ye;$q;3bM|E;szUQ_|-^p`X6FsaD*e zM6%}VGDcrFlxsF~I1$1R*GWtpE2_Oe5(5(|!Cotcqa_6)BaBxvr-V^|lM*mN`6s1I zBolG%zi-JdNltQ{C*2T8m2`i`wdX!&;}ZH(T&LZ#5Eeg>@Y9k|h{&8!Na8=!oc8@> zKnWeXjm+!{RdEA4c{rg^b$Y!t9^4{GCEVo87yn}G+6G-vxC#8rqJI}gXH4UDGO;(Y z?UC;2an9HrF0>p(m!`^H2_!Q zx}Y9e8di(mXBUqCu(8q!=9sP%|fkS6_E0Y_1|lQk&nl`{1v{a(A#FCwYW3QiF~)UR_) zy-D~Gc^9R*Eu}HW0>D_l?Mg)2;{c511Hf1mo;fn4Nv|_mQhzv5+mwirtB)BTE&gpt zl6H2mqmbl#FY=|NyEK7V>x4z6z5WWrd3A>%(}gB?1-^t?@$5O)NJX8Y(D{qz0G-9{ zITrxTUoGB;UXU;yg@c+l8os7#lB7EEISOgu(vbLcZ54)c4;Hbi+>@3 zKHl1Jx>jf5Xm@F!A6&xzts0w9R~2?sC^Ockt?MTJdvs>k&CwAi`@?0<%L7GxnnfqJ zuSX9^4V)E8ME!YE?kyhoBa0I)g)az58UdTmuoEU5gDBtfI}D}ru@ib*@z%t=6TsHd zKx#a3(+*z<*AiWBhi^OWT_iW=JNt!M!|VMKXVg!qP`?jUnoVf`={$MP!g?vXdCoH7 zfafRUy*w$tI>3%cv-l1JSAwrD|9E=Tf*^HVC{45Ul&>z)NOG|>9qZUyo01VKzPPQJ zU1j})^+`lh{o1E4WTVYjm#TJ|26+5<@nn|MdNN<@0A{$_YvOigp>AEiI?29<2PD%( z%h0vnJZyhy6wBK69gl1gbU;Bc+MlH`SaRLxs^uDtbQIiJ`nk5^%A&!hu~rVA_2gTfj{XLY3K;2 ztX{McR5;%5C%_X#H25byDj)+)dU}la4i&U?>V=(#(X9mnjk|-|lA2X}D>%K8tsO+? z_xPwAVhkgAcq)4lyydQHwLYH5>5!SJqu$D2bc%$*G?PPN7NC2Wia;vPE6sw8945;5 zAEY?5)hyqCFh6)p@QVmpB`Ygp5(=IE<;#Xp5hODCGw`qpTOkrj{ ziIvms80k9kcCk(&Rc1Zgg2;pIL%WFQdB&6`1f0N2iBV~1Pr#r0T3+Q@R`xENVb15k z=Q~0)y&`e$^oAINfbz1bBr@BeUBdPG&Kgi&-{SdZQY;qd{s1+ot>Z;o>#`gX{3-+= z>Fd(8_wFBOl&hm9c6YBfH{O*xhsza<;ZkQ>~rC%P9x9SqwfA$1XF+SA%`E4c?1W|)j*Im!kb z&FDFP2^+@r&1DKkZTdGI)?|}7MZaDEJ&P67#MQAoTzvp^$tJ)!dQSKL!}AQ8TKCxn zI_PClZQC-Dd4f3a>4$c>xGgVgacR*rD4!vj1Fz_lNH6##I_7iX%ZfZn`A7 zlNc%mi0$GEDzcnDdv^8}JEs(!%S|iN5`8{<%o@~Z>z$3%#6R9I}$sGs1uACQ+Od@!#iP4XwJU`il@ zbt@2$Ig|GkCnyO~)cNa)GnNp>bF#Ibm~-hnc!##9*t9#NdPI-9FXQYkW$v_4j>+?m zI*Vsj*<>tx^JGqO0G_p<3|yA`jeR{Lk7dU~!d}v-+hyvbN3AIO%5{s|NPNQX)|9n91f+R&yn6sc*)r zbKXli_aun+dJb96g50|HdbkrX*|$sosF&|#^#0i=foPM~-d4$LuXm!MhLxJtaXLh= zqSIjZt?18bPCNq+#DhIU@D?jq4nNwTh2mjJKZ7-~3QM-M$nxr(B`ulxi6-5F;BK~MY2%+U&V@6Np>E^mHO5=c(KRGGsEJa z={$-FV#msu1?xwSje)_*KLt+?CHMVI8l%+*(igYS;eZ7Ke4|#Pv;^%eq!QFQeqea> z;7*#Z_R0ahwzx#TzGEQR+!lMD6A!15VnK5z#mkTSp>lcdrj+u*;UnYGYw4R=049)W z;B(?b=5)3yjN)0(kOQ@T1UXU?P!6n55f_y?CxR*=U=7VAI7wP0_=OZ=OqbC{Zo)=G z15SqK!B^NKGa8;ZI>Z(7Sbv&v=dO5^)(%<55y$hXC?9nv(%mOg`+>uz>#4+P_Zq*B zNhVlx@!XxQ_+om=Sp!#vOb&b{R1ulzMB4L`;Alf4bcweco5;L11o)d=$(>-FC%aK* z4OR@A@!woRy=G)`*+HAfN{YBg7D`8haFQ|rAlL8cn2K{e)x8gVrQ&kb3;tWj68G66sJIz}Rr>~x8;jf!#~ZV_?+ zMJ(b%s2*`0ekjh9ObQ-}(_Svr6rG3ABo)7$WnyZD9qeN%gU|oEa=ddGKN^18(nTl8 zyE?~YV5omMP>m6-safYPY}0n|wM7Siv=0W;_{CQio2jgsfmUqnmI&G8!EC&f)n^r> z6q8NQy?TphyspAfHHxtKB;ZuD=HrK3JL{WTXGt60lE#lA1t8b(sEFJo!o)q)&-s-c zCmfUAf@>J&_E*uyYm@|Jl@;fU87OZnNHhKlHs2?0hQnk{DN){hE8QxdTf$M}1c{?G zv!sc8XuJ*jz2xXihE)+uGKU8FMyTH?f}X`&sZ<@HjK(4iBBQAyW+29=885tl!_gc~ zhv>^`qf4a2rwP){WX}akb}_B!bxr55^F|*jNplHXA4X~GUMf`PR$*CGb!#B! zDMI2JXA1-MMI7C&LK)v_sADJfPoo_F@RY`=NN4OTHeKtpb~>Tr+E(1YyzBEKRaCmR zk4mb*$4A4XXz&Q{WsFj(e%T7ME@UgTN}q%b5e*SGQ)$psy=a2j^eLk+%^YQzcW`Ao z`0^i0%pBl1f+}D@$S%k^_$3PW}|gC z)uiil5&e-hUkZ7gq`^^1&MKQSpTb|2SSY^p176STnq*!s2g#`B+$6WvrX5a z5nuWm6H(^hqNg+i6cR!%kC+m+`}A-&>$==KLSLpyP+yyQub-kI6D zv*!l(bL)s+iv-(`ejL6S&`_65ASnP`JGPWK%c;u6-_HO_R}$cj9kibI6KpO2$GC1`JL&p#*-%0I7Kf#ya+710_CQ!!6#wv)dz^08@Wg8Fi&Gwpw zBYDsfMMr9HSiCw?KHeb^E!5+zg1dlvVBJ`euX8Xn;{EmW1KH;<@9|Lf=(S;wco9?5 zVHQ`o7SFe2pAX&PMUYB`S#^(g* za}@f^%tGmBGrX)c^2$YOqm>mtp6CrRwAMBueTcY2xwHJ!DwCFeFKcm#8jLoaEyTtR5zcxEpcb zS?@m3HrakBj}O1S0y%}6KDFA}uYb6oX{Oj?Tl5*JP%Y2|4VdB{y)DO;>nl+^V&#pV zV;gXMh*Zl^ZTde9?tI||-b%f$n2hM;F7~=H zk;EwJM3!F^N|W0-FqI^tTXb&eBX{_ZkP-c2ZmTMXB!&CPepQS=j`YA&WwDHFp;O&~ ztJ2CnJ;tTiarQsH&;+oolH1y%C6|v##%zfUmc_a?OxfLNhTNL-A6N!mQdKjVRKHpa zoh^%nd##0jDU1E@DEJ@wza#Nl=%VN8N%(Ccl<%zniM+Tixo=A4hug7%vKD#@g`UZX zGdiDBHKi`JT>=Ql);E$?jd*smmFX5Hlvw9KE1y5}ZvG%6m;a&D(=_yEMj)NL=8~#u zx)yw*WC9X;Jw(~ulv6SXtmId%nlYyFcnYvg-b?P^ix&`Ifj+H|wde|bq5)sxn93|j zcTfrfvV^fZ@356ojd}V~spacB$`KDIQr*BdCJ7 zTI&PR7{F2Gbe^1r1|XC0%<0NS1iYRsHQQFMsmBKu>%&cZR2k`X(ST+%L!za?c*Wlz z!2YS|eFoLM!z@H?*I6j!8YP8!U&to$_&|*HV4CdhbhXg-T0Nz7t~z@dLg&2BzHXPp zgqZ#STxWm&l#~AG>&;Vx3LAf{b)#0i7KtyHa|m|V_rc7OQv{Ki*N|WEBcVaEFN?&y z)r{Z4Au#ZCj)`(#*v+{-*ik_{gQ^Wo+-IODQ%>uGV87n1gPFthbn=OC1KgiUofsYV)Z!A)!K&?9qd~Dd6>ZywU^Vqhw;j1iH(fcY@0lyJO z*q;b3mn%-S>)xbqIxvAc%ENH{i+#}1Q1O(~7MmBv$?Z@zQqVBvBlMb56oVp3H8xWdHi+S4 zq~Rb^)BZdM6;g^p_AC!PgtIR)zn;d50$J@Vk2!)QD%hdXpk&B=v86;rW`L*;O45c+ zWamVJmG2_190H45oKcJRgh|t(5&$rXTL1ua*&Dzw*8u!dXeByPCpFPQC87OqppKsV zA1<4J9Km`p@(gWn01zb1N^r`6n^aFFk2k~$k~J*as8EnN@>w?`jX_x&7W)#0EWf^i zb~42>=Efh7RcAN}QEA76Xty~DV8 zWIhECMCB_c(69W`k`-QGOqN~xS^aC$icG3eY@d2SG=42FL9pL0A zP65$r1?93(X5JI=_rpdWPn5dnCcR;kfmy-+>YJb-U_B=7gYpnb_lxrexy&ObsQm#N zh}D`HF^Zu&;t8;Q4?k~|crHtlFRi=H#TNafNHNepsX*e9CkKj7bslaUtosOw@)qss zGHY`v9$D$iy5PQy%r*A9?oq$m?EakhPbRX}U#AZW#koarApbI5(TR5{cs7FS>!vN( zu|bAt0k1}ru6G)i8#RIV5hVe);BBde3k);CI$Xt$W&WfI(S@&S<{_OgWX#McH6}#w zkN~z^`ga-O%85Oi--gf4ZR2y<-Iyo+CGrHDnjm$l#Zx>;6*8lxFC9)Y#)LaFF#*g1PirW76$Egq@_s&% z-+B`1mQc*Ey)b96Sul*nW?AAXjjp8<#F3^+`f4+$?xh^bJ)yeHwu3!`^RGkAU_UML z*b93rcQyCRYbUYOpc02W*GG7@W|6LsVqr(~w8pEnE4GU-@;9m}%@8>^?M?VN!sJ1M zqKU`k6}x!v^UUF|b4A0LnX|x!I2&Kl-*{!o`nta(g}9@=Qs=4qK{1d@IEI%b>#Lk% z%M*E?)--93lffEYGDR_ z^aPZmO(eqIg%w10eEl2?sqvjJT4wF5y#Fan;%rP`eSE3)V$k`XLdRV zeoELzEl-Ym+a4qe@kCqRs2sPK)^N5JXH*6+DCw{bs&{Jfc^9P_HmFn)XXB&P+{fM7 z*<_E=R?j%{MV@Dt{hc{E#A{iG6=;?v1cS>ZJ}kZWmu(4AvR{LVAd=Q`o3XK+|7tAv z;hj8*g8u+9>GzZPDBbSH4~1V=bj1}V4Ai~X$<5mnor!CZH| z*$0z{A*2>DSn%1;RPyDs!=>pmUEzl8JD2(ZA=aiHDG9N$~Xnm4- zy$JIVcThCf)Tl)*jUZ#XewfqS@`b4u*%5pS4EgZibv>Rw89Y8RzdC(#kZ+hGarFJfOGc=uJB z)h~lr|-f=UfOc}Pehrt=H#??B3} z?@xSBHK|61QO|+*5l*>t2l`WCNOM`EE-$tD*J%&spmzm44oL;O)!%HXyZ)dWZl}w% zTs{2NMi_&BxI;AYg%Vl)WwTRXp}c@3qSW4|ir97R$L=4bIds!Xq6V338e+P%HZ1>- z!ZhYoFl9@zg>8MNC>c;aA6{Pr1gWH~XwajcsGf*LcpNBkz$=7M);0UCE1nBB!>nM< z$_SNp>%|(Bg@MUJf{c*nHcx7#hO{Cw5rkgBTru-V3PGWl(<*jRR5cqBif1hKL*d)X zG$b+s;%P=Jh47qiMr2lqV17Uxb7_PhB9eF?PW4KakU-m zpB<<0@7Jf!$&2lfMj<@Jk6MI{VA973m)tUhS1Ek>OrMXkq{-IurI2V#p?pVD`B+Uk%p@N4ZvRB zCo@&;XFHCvx%lv#H=;6HyO^y^f*fH}mV$x0dtq5#(l|c(1dTm^fI zw9mrlH4uP|3Q!hAO~9(0m(L>LpJCIRjh{Bk*0Q%_A{^OD(ixsw-PE$GPB2hAllF3U|%Dya}@rP1ReI`7md&d$ZEI zLvAVibq7a88)r6tc!iUY$Y-}&Hd78F&|)7_HPqySA2H3mY)hH`1rE*zYksoBpA;-+ zA$Sh4YXe37u21+NNPp*EA!LWL--KOArGjrI^JN4$y@9kYg7FYomBG%SnhJU5mLZyz z=sK3-J14Q4dUlm@OoM4aFSyAkylV>D57}u+BEgHEm@ws>t>AM#vqna|9uO~Yudn9* zl>P3R-@*A(3fL76r=d~HF2YJoI1%hJELq4wj3D^*&BragWuOy$97&{jj`ma*BVW;= zkTwl879%3GKS{^-q@B9%sOW_obTlZ|;!G0_MO6(!czu%lA?{=UVb@Ebsj2_F46K%t zHtvDk;clyh77+Bjxl`JXjn4IM|JD|sGMZ>)*v=(tkp#!gAf#?jNoIJ1*#sSN?L7@G z5LSd{m9PSN>g2((1c&=4lg@sIHz8Vaz@=!DaasO_RN~PbZ2)ZWHKGjymm`>D#CRR^ z5CRZ3-l_tGr@GM7MgY8tuw$mlFIF3~`~(K4Wa+BI#1wL$HaQ?tE^*O9$9! zLfR8sKm=_6@6r`A?b5c%>Q2ql!zj$S8SkFT@|RusWb?uulTivFN^R9Y~6s6m0S;;WGHCL-wME*uF~s+Q=VCRGwr(PR(0Atg>*Q|s&NNDn?$)+U5G zo`MRC7)$>_OcM<|;p{=T?jXg3&JD;d`H9DE2ql~ zIqYt79xA@7;h}*kQ-faLf8d}_rcD=P3R!UxSS5Ewgto&Tfv3Vy*jyn;l*ZOUc;51Z zBMGN)S6TkSsoahD1kO*}!8Ii{A84{;lSROI%_94!*vusge&vdN@f~Fs9I>=FDu;8& zq8O>kInsXuOBE?{(5X>a^4oA;&9OYXE#^_O9eUUqe@TR%6iA(&f|Ndp#L=kpv9!5? z_cSb?Cp{(FQ8ihMp5{V9O*}2E;HtZ}(s5v$2v@CF$xGhK1O7g{_Be!fY3v}5QCXaO zC2vosvq_Z9*~+ul+hOR<0sv_kYhDA%E}QDquBmC(hjDCSmG^N+-?*{`TiC@jO9ich zD_*p`8N=1RpNsol6tk1VE3M;a!oM5IHsUz+M}sl2roHx9b?VJn;@N%w_ZV4l!|Fsh z^)>cFkg2cEBK-8%z|Z6pDegZzi-72{18GmUZGHak6F^f`Z1LYA<|s=<2XEijhiePQ zmXD;B&T{lHYFodK^(}6ydLBXvYThwUSHX|v1Oe~AzSCFzo%k&K%X=1mu7>?zpNneKkTxtUY3W zxWZ`@y$)IuG+f_NLNWZdMS%@y2dQ82NC)h|KR4yflC3*6p^LCNE1tqD;ud6uzR84e zSML*H^Gnh>|4VP7-&o{8(?(zr?SJJgRJ_xcqzUf{rUDD-ZxDeB_HU;>C-@~PS|ND} zdNubE@W0>bNi(X9J`5#E?}%%6G($fDjC`od&uztRQyuF=|)~?St=80t5 z(wMrsFjSVRxT?`)^0gwxjn=u)1;)u4MDurmVt^bCHA$muOqUP!5oHO?Ac2SZ*49e( ze?m&TK}M^(^5# z62KU6u@J)RoE$aezmq^!K0m=Zg&@~?VPTpXrYTvM=4mCS*K&1|pfx1tFeLHG=^y}s zo$=JCWONVoDVhD=XprBPPI49j2p-q%soKYKK65cP2kN%<@~eKe)q0L#mVo&stZy$` z=3Q;HmmTlQ{r=id@=v}&_&)EYfB$-_7X+Wn_lVv@Glvj<12+cOl~> zk)-J@8`5hHzH%p^IUBJ$ApH{#^xb@H;_NJH;T4g!lSGeG*Z*bCr$ul#K$dY6W&_tQ zk>KQ!0;y8IKy(_GdU;nDBb)Vb)yZ%%X>6-2iS=8@Isv3^2qsxC;tE7od$qNbq_hGM zyPMaHY}(o(Ed~yZFMa@2t{C_>aaxtlAZi^?U7yU^7#KAuw}oCnFCqvcxiGY^W&O;_ z%9B+EvxT>Vr~!HTxry@6cg}HK@GtKDLN7BfJIu+8Rb<|$v+E9!I5oayy?=5{Lq}PD zE*V+cfBu@tKYrSq(e^xI>IH3PHl$D&8vQ-R!kde}&eo?XBkRx*D&#EY5g*WG|0BC< zvsf*6!dQXYdC7D4+k@SYGXD8Pg`6iTC8V7(BD$$E0oyXXXd!ele(X>vhIW)h2*9A`36CPzwZKTW^T@~4 zj%sUXQ;o%UuJ!mIORAS#?vZg89>apME%E}Q2`H=W=iocR$PT@=${#Iy^Aw1kO2`~S zD@-=aKGadeqk8L#h6ae}`car|YTseoJ}bjR7Xle(yoi|4{?Ez zcF!p-V0DTJ!)PSxD6ZT|$!GhSGl~b9&u5Pds7$%>vaE$wmJ+uiVNJ# zYIhiW(dk$7Ttu}MD2`3ueddLG4a6Vp3jdzMcDgL)E_7JW6Dd<~3ju|BlP){xN=_=@`-gVUrY-#C{kLyU2~n_*LRSDKX5e z`7m%()oT-`$1cTGDaP~+PrntnbQygi$Dd`@1+=^$+vz8=YWnI&LIm7+O$J)?qId*( zX3C5ExSMMHGW;!&K41S5QxnhGVfYD3&PDf` zlV7Pzp9Id`hj0E^9v9nwyDY~Q z_QNG78vRHkcQt1M-yf&+Xf)ibV*HKT-k{h_*~cclxgsI8((pQ*W_yA=V2@hrC3m$f zd7DAxl7J2J0MNyg3mCOKX#Ur@gFhhV36AvI$A))NdFe;iW>U}5N*jAK-{D%Lh7}Na z8{8>bGe;J9d&k~|TPnnu8G3j7S^&5Z3AOiG)8fyt@21|pfhq-SEF;?V6Tz3U$^ug%9n&5hXNft# z0^oLiE>ORj=WU?d(acg5l{auumNx`w{M?4p>SMn=guF;re*61UuvKlI#gY?mC5$A= zaoc!8GP=-5LGGdjs2!=&)u4hVb-0l+VHcYyE7Jqw8No4HXx$+beVkb2Nt(nns36Z7 z{Fk*f*_Pl6T`nc3ELIX=F^pAD>(oa#aA`HQK%mZynYvMp#F|@6Bb=JpKEn4EIy*b=tN9}PJ3J4YX z9)zLq$4_zvI%$_J1{x=S=R8We4q;&7r})M#&D$Z`^?EmNyQ4Lr=Uq4fX>esIMCH_D zOT+l2-i?7^FU-)=#{~{o3_OPn1Z*8^Y<0Uais!altH?%`7gz_jQ0~nViNve%&LlkA&Y5%u}@EnLXstlWfLX zdThT4Y<5a8j^ZvJPsY5sZWeW??Ku}x;QFk$y$d*Ntpd()v%%c>6y%;ZVRA-HuLlm{ zLXn5o?+t?F{d9%SFq2@&1E~a0%lAv{r=Z5Epp;rSZrQe7TEpSt^2Xr4J?8kOLyc<#p?l?4BT;+~bs%~LYf2nICX}kK>7p)>!&zjo6 z>pJh4z6xIZK6S6M!(aU-Sy%7-SE+`>L(xTr*Cvw84B_jz|w z4W1C@!`W}Atxwn(geZ5CNPTDy&J7}@4kP*_S!uZ$`V8wT5-ifO=yx`OX}!n6I z*;P(mdq9OJDQ(;ngUwKg>b{#QG{pQhUV1RF^5p-3jcLI`$tWoVWVO+1EbZTza_U3i z|Jww?+i?xd4J-~u=ZYv!=vnk;cRA5(ff~0f|vvN+z zg0CPEW*k)RdWW7y7jM!D`YIn81-dK1;!9`>7ltXO)dToa2~w@8hS{=~>Ct>K_>GOZ z-G#jdWKBy+eQ6cHeErv+TrU|Nn&@g6^=e)XS(^cdPJK;2Hi~0d@W!cR_AVhfzR3Dd96)w)R7C9 zV#L?~{5~bBPlbRz@QVroy04<8+HcNiBngK4+PD77bYNVi>e4Po{E$qBxuu`~aRhvx z%wh0t&%6nzChmCcmNR)$*fRU?8-Mn?Mtkh>iTZNpFe~J9uomz17cIriPIlmucxgwzrfD9Z+}|W`9IB-|5+o&mqr>S&W1bU78yBj zC0+&0ZML`!(5@E#{Jg{y)jlinQQG6VJjAef*{?tK`RKk*wtU!B%cLRm-Y?m=n)AQ@ z0W9^_D^v{Y_4!{|{DJPS`i&j4iJ^RIu3UKNU+5y@N_&8*yg*J!YqcrX;OLn$mPKom zrI@${p4D=6BH#C#KGx7R3_)Y?`~R%ovQV=dBJDbU*OkSC$9ISZ_AkVII|5c5A=RH2 zy12(^Eu;FZmY$e`UIw1*cqJ=dMZ%*p6d2L+Gor6|x92Z+n)JU%>A$N5{~ineZSWNQ z-IM-zYxei-)4z+>fA?p-4(r_T`_`ntm*xLZHB_KTL?93d4MdS_VuIz#{u!2OObw;T zOrk+XhVygTTDqGgnY;?+A&NM=Wl!K$VPY-eVOe(Zx*jx0MXs3!mM&mBIB9p zFw3bTR>qm@aeJ#XBo9UDqIuNf$#%2OMAu6nsNXG?t-(2SRVccU%%laD-o}UWsaNU0 zCRc|#YcQ*9i2jkcAALC!DU9H|L-~I%vP}Ap6EimmWb+#YBF*G22NPvZ3_vj8j~>kUIIdc27INwLJ7Jm_;&;s>-hb*lex9Pg+r#Ov#@k$Jsi3>Z#MREuR|RKhQo&u_KlKII64r2rUuT;oTvrTP{TuZS zaB5E9;@;{!H*0L~eN6lZ!87fBJh?eOJ^lL_`6?tlWoEZE!c_TuC*^83F9H;cmCvYb!zo3wG_N3s8>|%_wU4Fv(r;} zz{BtTg5JRU^WXceKmXd438TYLZyu+<{}aiv4!ruFX0ge8r+7 z!1HT!^Gj^sklA}P7iO2wahKbde-3wNXMa!qvYi(`(B9wOjf!_{K4dcQC zanRIFjaP$yU;Smn8f^WErEpR3R{HV&;%5IlZo$8keW?M6Oir(u=ky?^ZA#tc!;buQs+h79?fwxkB zx8^%vDfIq?-#HUpO)X0&1ou1?Z2bHAZ)^GO)k~+V-Q*Pstz3l-+(thE7plc^`c}W~ zAGfqyk2|NMk5iqvw`VW7G2lH)cM8Do)N+=JHbNcUD@DLhcTPJEp{6r9r*#JbEDrn@ zPk7JcpS_b4=A0G^nv0oE@QWNOdPRCY0nrzTbxhk;>R%0-BR>>_jvT?CNoTqsB{?#8&16mH>DJl_{C+jOLw%x?x z%%1dg=2q#e;h@3YAA<(`Fb6ix3V54p%s)@#9?b%(i6u1sAAZK)s9WNw9uC?9i=}`c zLSFt`AiD<=UHmZY4RewnO z&J>qsY_TE#bb2Um3wquOwjTc<_TDPIjpbYWG&3{C%*+%sGc!A8wqv$q8DeIXnPX;% znPO&UjF}k{<0yOYbH4qbIdgNKxtt5t(@W~ER`pt|`u#~&)k{O2UN)?KRDb^6-rh>OQH5&vm5T9`K3&Xl&SA47p{CDY-|ybZ2-FgH^%ojVHL zeVfy+h3V*30npBOM{?~8H(BBV^v3kMAGF^J7!i!dF8l9>g6od+d#MwJzwmOqd{5ZI zzjc=}mtgm!!oW@#7LUKv%j4SJSnPkaTSPGK&CtzQJT+J?;CMk;l==}8U%egZxX+-| za2I5zIcl9U=FMxT@zTm|(Kxyfx+==jY87fy6IcetWrpozI4w_ zhb+xDQx*)Xoz+p7%se$7HOf;{yNkVXR#pPwc`Q69()Z^)H6c0Ad>wo^t{+-V1!!TC z*6mpUMjIbDh1$_j3|}V% zcHPq2*5&`b{pEOI{??RdmR&OpDRBeJ&rFOK;NfBGKOEmO0f@?OeY*C0-tsg%B!}=G z*7-H@aA13=s!UC1C@d`8y>9sW<%jn$T)64&-o8he#*4)Z?@xY-BeC&OS9D62t4fho z4FBLOyKda>b*PZ8)||$b3n&idjJKMeGHzU!q+egnymP*00m5M%q0u)`I@jSprqpwz z0K!PQGLueEqZ+Jecn(!bEoqR{jelV5K->;w!w^j9A(45im@UVD7C|3@`?URskbmRsQanr1s;(il2 zqs%d1sl6nub8r)bNN9PpdED7MI}wB70Z{VO-2J*6JDl>&eOq=A?sqsFD#;JKojOG4 zPA`ZzAfXSu+L{DS)5;GMOrzekhSV_7+JH$z-Ot`&ynYgAsT)2|p0t-z? zhFV4_@JtB_LCNq=U!a(mhch;q6?d3DLt2Ir;Pg8Tln!vGH$hPc57rPVPT1A#0aR*$ z6U_CuiDphLz^t+EJXw1Fw&fPqVlm5JCPq(hkT|G3 zOf5Dm8rIOc=9a-vA|trjBDw&hllLT<>qk+Zl` zdu6&`E_rP=i|VTSNb@nv)aKgDGtZRIq`1179jf6@Px7Lf4TFUN6z|o_o@=;JyHvC3 z05(NS{m?0ExqH&lSck8!xNpRTnr9OF&PO|T$R8G!0;E}EHXQ5pRZpV5J{f=}ecQbj3)OIk?^ z1%*W}@lvVu;1$hBcJ{d#Ez8;+wj4Gp__)=tT{rSAQqI^V*#77xn;%>KJn~7l3_AFI z%Sm$Wr}{6>%1%C$DR21$URv5)->*($bGw=qdA1z13W*;vrSgl_p4v^Gr z8C+IR85`wNs1^A-$h1Zzv&I=Cn~D<3j?lIZ)i^2TTqeJmdbXYdaN_R}YRJl?jVMp7 z3O7;Vs!Up7o#X`g5@5h9S$oH#C01Di&Ky8PV<1~1R_?)dVDXf8K5 zK)R{>`TXH?TKW`VZ{@XU&*8)`BujatzpVT?NW7T z1>>0S5h^}AD?3|wOVHPw;-E3r&CX>~YiR1_X}rew<;yf6v1F}?S-DxFD{?xu;Skf? zVqEWL1Ou7l^=hg=AQz9f{X;Q8syPwcQzvtMR;hZQJe@kB1x?q*@?@<)SoWiR#0zeE zo#yVgc0FlQU}6Mxx-MD+Y0i6m8eRiwkd&t^yJcqYr0F^VcjAoP6N84OxYFKxPTH{L z-lf2Zw6Oz#0JLxi6Kumz47yk}{?B>TtHOqp;x~_{{Xdj}0wY7GhRk~2!j=2x-_6y| zD4og+B68MWJK!)qm~OC`R)%aCSu$NZkzn4RFFory)Yfga$IDc!meg{ql0DL&#zLRQ zBs!xCapsEjR+>B%s0A!N5?5?zSJh#nk!$wt2SSGcCAhdepl_mZ9rr6UV%VB)PH88X z{nX_~ad3mOA$}t83~AO?uK;cHbh>D(2%ZQ1Llm2JbWcW}4S6;C^_OY`K*R% zfRFbJ8PjFds)RqDgK)X@$@XuOS=0@Q)6^?CA4BZq9F5kqURgbxppeQVfEreoaI3;b zAC>a~X5zlaZsi(zotcfQdYA|q04?V?jw!&^n%{wDe{`w_+*z~a8C0iSA+Yei7f}I{z!i2EuBxS$3!K)s1=OyJvvyC8Q5qwWOQhL z9YjF5HdukFU~oAES~-HXYHu`FN_l4LG%O{_X`=qY*Sy=$3F5MXmI1h0I6YcBjfUd> z0J>|P8Dzz_FAUd4>cO#!0>xQo+bg|pHsD^e-bJ#0UftI6PD$pH-`(T-2nNR-jvW$5 z%s&cmSP;G;R3E;h}$u!H@Fi5hv zC~a(RY-}yog(3WyG3Ot`A!aq_eC~sf^JSv_0~tN36!iA?SXIn2AC7%Xj}`_aflw7x>`7*gnyih7(Hl6=3fw%TW| zJgc#smd8-*`=Bs)^oi%S#)U)MUI}2i^!bOiw>rDoyot5pWa-_((46*CJEr~0?h>CD zk&L;1$gA0)HMbSny3jEOQ&mj1`1&=N(9py~O*^JPIwwub;je43Mvn%;&Fm}0oVK;< zRfp>@)*A;;cbaGrMq7J#Erl-E6c=->KcN-ysV|p4<2I{OznY%5E_&X(Ee-(GU7Y)h zyh|z%*bL3ME;(&;*0Y&yHw|8omMVsiK_66bP7w!q%y!IaX7GFzOOTrVa>3kCK3VO^P zEQ%J}J39*#V#7=GCZ+X_hP}zr3W}xgHmDao;dXr?B+$(W2Etz!nP35*ZL0W0Jm~B3 zT})S+5HqVR*ScdwXGSiV)}(8H&f^6JP5^P%g*oh=Pa?HQy>anBu63^2rNDf8`03M~ zONIfj-rXknMHZX=CPGbD&4o;4ar{kWaIC6_fGAQ8wb(CVoScm=Z&6o{I?!)`GG+Ly zTd<0pS&0d|zZd9%$X8H+u`jj!jc3f1P`~6ZU_g_uM`(LA2#1)Pqnhwz%)X|nI)5@$ zwXTMUr)LEwce7H_VP4V0WDZu0ri*{i(upmgoGp_Z#erTLNt7y7WgRKdiCS#H?w<5U z$S#0CgznQG?5$ue_hjIR8*J6!@oQ~%o(-J<}T*}9c9ZG9d16$aR5EN9J$?*pqQh7HC+>`Z@i|0_}%f6=}#(#LP0 z1c~sYfuInuf#2Mz*zuh^z03o#7&<_aklUik%BeUX^1-qtdSP}`Aqi;PY@!FY+!#1m zC+x*(A@6-!>Ke2Th)EuR=3S1i(C@EHlhqflY^p37DLNPKujh4+(KqDnpIus!Zje8N zI^!9$@lE8oN7OyvVUoeh%GFHHRaCN{WcchK#ER|B*1rr7^gX6(rlsZOB~*2xrGGLn zs2zDw7;-L~L-n57X~2!kJXNrca$zD`va##ZUr${{&cqu6>|$zgLT!&D>4eWzO;lKY zf~~FoP*g;!A4Acn;4|XD#f(qhmywWACp30|rjYivk@ZXlZoYrBbig^rU1wq>H9=q{ zQMFbcuL`Kb>chLRdM+HGK6)PcU0{Tm)IOd)vjZ82+m)U7NFe*6jak@l^}hUZ_jsh^ zRpa58y{~s4V9`Y1pa0xe(j2h_TGk+bq$}X%%;qE7ApWK62Ti!4*1%}-pEzf#-hGsU zcPe&D1eioL0G(Y1s!t{qF?G8~a+JDSKg8G0ZRGYKyIiN4`ok^nk*MVx7=(fXG*i^g zCj)U-GZSZ%J`~N33c?zJ4K|KXuKV-=U1NSjDbA}*0?P4e)7a6^4Uja$=Q(lD%oIm; z3rF19HOZ_H(!t%-A`II1(w;^Sbd33QYZ5+=ItO%qmrdVer6*1q`7!saNko#=*Qy=` zIuk*H{50^%RD@`nO^zs$U8~Hj=u=N$zAZCP@2IAlkC+IRZK!r3M`Tkb2D#nEmq3Vk z_gjRh20)8Skyk5N&=G(b9NwZ>VnutnBL$td@|*V(>$w43YYC~)IIac4R8vHtxnD{^ zaPUFHbWl8zb>SGlqL-bFy%&LY&Rk-i*vW6H8Hk%pGtBu31oT>-wo1|}Fh)WT6q)Q2 zqaoMxZivBh9|+W;$_Sq6N}Je`-B#7ec*ZQH3BWMrLZws$b>FYkfeK$32@ah%)5bYg zU8)YXv9wdu_;O4Fn`NC!MsFbvr&OA=tU0O#S^K;hvZVpfky^Xe`V|pS2^zPv&d18#6v;&gr zp~W2MZ{Inus3PSUidJsC*jJ!{Nm<=&L){v}Sh*L_SF%;s`mbt0BVwuV4yI6$PIHok z;^ewX>IDZyC9`El<2lOnJC^OsxByPPc$^$NhPy)Ok z56@pO?#9{yxiI%1C+1hNm>++X^5U8m!l`y`B+n}TfKC_DWCsM@o$B|`Cj&xO2qr9u z_CQ_5A_Cep)(};xLq`0XJ_L*&R~u3+Cid87qKW7}J$dK`^f zJxf$qoSqS7vCUBn+DGFVY5P*vL+%C0-PRds2npEnzEHAeAgmu*BW z@>!0p`!m0fdmThC0|9A#6p@HfC4M>#$kTos>*jjAO1E8ilKEXKLM69S1A3;DNOxEU z##(xm<_W%i?H^Oy#y{ncb_OS=C|t(;{H5;Sb~~st-XA*i;aw3*oZLn&ro~*~#epTP zmteYhNod5ZPlyNwsmYjn`Srifmr=Z4O}U>NZ0~fEasr}WybHCQF(WY`s6KA8F`zZ%%7zR3M?qQueiV>UPU;iVb?E0- zNxyo-mHfj<6K&^Gw3u2cf>%7fLuy6TK0jx+ODaD921lsxgDq(CfgYw6hdji*3=O(a z>XpgNeyS|gMb&`2B?Vb1mBB(6O^60rx><~J9vWox zxMd>9I-KxQ|pLv^zX@Rg5F*AN`&NekD5`pg8n+=aSmY(L)3&8+3G9p>KN5z2GD=VyeY=_yB zBsbq%x%VswQ!1u*rj1&GxNSQ8>C8JNOQ(DcrIA4Ll=8$s)x1&xHqD099S38&^pTzc zFG2k=j1(DwF-SKZ8nlAW^mb zOm@;}u-Dcz-5g=DVHH<|J4JE~N+)qRA;6pu2+av6H$i%zgf_WqU3~ukbatH&UNC-@nL>#%o7@(^U76IlNj*!D) z)jAi>;W+;oh$d(}A*G9=qLdEX2D4KV^vopw+;-j&NcqYb!GmmuQ;sHo*Vg5T^VR5N zQs_a~n71TCzx*mo3un@%K*VMdyxfg$q}4j?YeNhp@2R~{-THFz(y0j4DOuZZ>KQ+Z z#!p*-^?dsxb1wQ3(&pY%jsi4#{U)z^f@JIc1#hbh*XkCAy_Bp5dHeve^&e;as;9{f z-?H|LPPWxDEf?TYC(s~P(X7BIhu9yKWq=X-8&_#P9Xwn*5f!dmv3H~_lIvzEdM%No zfjD1a8#L9-g-a8;di8RY!cxM7J`o{@nzMHTLi*B)j=)dF@rEJQs@W8GZZwkF=aeJ& zE3g$<@5MFVCpg1zWrpe8Z@*6SNBnR}W+)QlCK{8S_Ds*oJ?^B^eT#e&^IG0~G>g+< z;I3;X;v6?qj~W(iNb~DLdd4;X{WDWIPgrAoQ<6i5gD!iZjxXc6A3Gu_rubn3f2SuF zAOQyXtX#^s2q@y}k1@gkmx`|-Q#O#(f&_ljwSBUPIYtO=;5k{>zdH@zI)U`(yQCGp5jC4SA)}_u_`X({5dev(dA>P8AE-1YXcqu z9!I?i(KB1)r6@12*+nx3=~9T-eXx%>U~%?PLJ=PV&(L=ZTuUFZCGi`xsO;EHy|Q&+ zh#{sf1p#6@DtW!I$RNfUmdc}`E5+PFn=jcTx-C-Q{ zLxW;}4eG|huNbPTd~x{-Lx}oxl_p#5^7$J@tn@aH?(}z!T%O4U>lGf8TONsR0HaQs z45xBnN2-V8O(9;B%1k6#Y5dV380^NqPJqa4LX+b(#XhY=DERlXWtf(&ITLkSW9?va zuApu8^p}=$d3HLnDllYBIPPu{^qPA@LysbQFFPN|LYsWk)B@>{zV=Zkj2pBr1;XbR zny~WA(ms%JsMr@1g|bWMd3(@mA$&V(s*8g$THz;%DxPRH*teRr(pU z(ujiJ@{%GQB?I9^Hu!h2(ama-8xGOYVUI^v6`2#5+aj!TqTy9M5{Vu-{a;P(`BTFT~HA<#2m6)CF7A$khLRR@hVPOuVQrek$i1L?2WbMj3 zK}J*S9D3d<9Wo_X2O_}wYel-&$Lms~9n&(%)MSIyUg;3+PAxbk);{jvk zvAZ$@zl!p4LPbCiqMCv2(@W*XB5i^jTpg^(;tA3V3*{x?*$Dy2tOuRL+KY~&%P#Yg zGU`sTmZK}s(Anx1g^noMhJT*yL(vlmP^?88aV6D3VRib^t4KSVh+z%0j9;=C2Q-f; zyok}SQ>5XzK6n&BfSP*?wEH`-9}QIz5?a>VN6bkLr%!r~A2%bg9!D)zS6HqMr76Fb ziVo;&3*$9d87M<*brTA=ZYeT!Q<`&-<$Tb#DG}(M%7moq)jQc_8>;?&NjGD53_aRJ zkp1z!l=2F8u^1_^Y5HesLpyf-i^C+{vWt;aGI23`A)?9TtGxK<1u!Uu?pD`=Wr$r_ zK}O~llu5{+6T^2MR@$!Qvaj*k%X2uPsj#uIY>l#QuOW1xffU>PX)PESn7CO_ly(-! z{wl=%oF>8m+MW;9Co!xD-ZyXMX~|1x&BZQ=8UQ-32~9{51N1o&S9*G0GBW}ht$xn< ztRGd}S(e`o#La|1Fv6OKC(yx8i$DbpgNHI>>xbk`&$l?z(E>NEJ2?lx-~ZvoE9f>_773%5{0`-DAESe@w--8vQKsV zm?!fL8L)?1v~$aZ6N48GG!@mmo%OQlC;0A{;FB=yV4FiX!&E|g1C8Fx#8xf{8m(Wk zqlN?WDiW1L%kO2An4LyXrGeq65q zm@G*s9^jkS+Boa#bvXPUSLm?6@DU5&snFrM!0ukfTSe9kj{TbiPhDu-BwH5tvFEOu z7Y^gp7bg>Yxsl@22{0dVv!pXTxavY3h$;cWy_-%pyRY|?kn;nRWG~yo$PQ+Yp8SA=8{;$hG0-rpb!qTvr`xdhm+{3G3fR**-xNX z%QY`v-#(trUMrOHHTg9<4U4xl#&oR_^|sZkS^Zm|W@Zvm5fcK0zOJVgT;)kjuu97Z zy-gXJ)qJ-4Xd-KIF-n2epcK&4)~8A8OF98a1g%WvpS%N#=>o!dNQMbwv}8uL?a*0R zVxF8n1r_6!<6yK2hYGiw2Vh#K^UU6|tZsV?GP}YVYUOefVD%`BxN3WI=93Ae>^K%?1=f zJ9qB2xT|AqzKPkAT_~p@rxIK!&v0FSYyO^fRh(QqcT~`v*f%g$^=rt_&fs%l1oqvq zrU=2QZqciSAr$@mRJCMW`6r+2#nndal})`⪻j3_ORwley|G`ThaAs2ELt+;Wf}x zYa;innFq<4-!xC@?C3`Z8gRdjmu>?1HL6);xSQ;skv1M&VR~?&Ojt2m$Spi8}y_Qwtth8LZOMKeg174R@J zJ)!L6Ofh}52Umf2%wvsdSy+xWK|Rtl-+AV|M@Gu3%&d-~&CsI>A(SATU62PTbt2e( z(v;&P)Sw2xdZ906MfSpq7F(DZKC{do2IB<~ynnrbCJUEG!9MZsoYHe8|M@L0xA?VHYE-5|zmnK@E`wM*W4@h3k8O5^}CSRSv`YQUO}C^LsGZHcrS!W89qaH4|S# zrS3?Rw%<}exkT020?+mG41q$cCgDA1;uNUGo|AJbQU#M0nmoR$Ve<*XEM4CqS}&MuGr(VjF!_z@vfzIbb^#VdVT3iU ztf`d7;PJ6zyn+#Sl1WXhe-a^1dW!i2D(54dhk&jH*@f=Hl9k0b7I@OeVu#J5z6uWQ z=l~MQ1}L>^#@P5UO#VtZz{IkXg>3$)76!i{%b+DbK^!73KU4qr-;9ZneGqU`ONOL~Ij=29Q}t0aTku!>5xdq`W;C zF-=onicYx-icB}$Ap=ITU3V)7hQ@i@DrxJ>gm$lm%E9P!S<9&rpNh5zY$$zw7P=ou2Eczq7uTy^ls31b9>qa$ zHCa7a<5odLSXdA8D%El>P1TRT#FB-YseQ=u>6LL6lVuuRWbUG`5}VevDejWN7?k<2 zE)~oR><^{N`zZ^7v1UubF1&z+At9}+Hm6N%AUP-M- z&~W`K(@THVxWGuYGr<6^>YiQFpZJTO19`)6cD=xA&D?^+ht*wzjj@G!r|T2=W1_L6 zXdOfTb~bJv36zMdc#{_5A(BxWyxWmdKx06iVTNX>3t&?uSRD)D;B)5Th#CTKGwCLi zI1}R?I6p6+6&Bcb{=qZ2QvLk3D1HZj0d24}y0XD>V78_SugqxhM!cQ(ddpk3+V#Jf#-??Qjm_D*bHQlQcV@qYj`E z-IQ7ZOQ=n7D9%1hHCUw>El@)>5*!KVGCy$M{U{}ny#m2ajGF_f+TVo4J$c1^c(kU6xrgK&?RYAJxacFoOL2O{*UHh zA4}G*u#J=9`%-+BUDr|lKbWmsPJa^k#gq*=+B#hUsMjb(W1CI5gHskc?GB7{6|3|0 zbZDYLmF!y(?Ea3Srn;G)U&mYrlTiXbZ5|4F2-1D}ezx3W*W9*_kJX0lG{ww9y1Jbi zD7!5X;wr#^@=|TB^q>4wNIGB=7>{(3(WofrAp=7DG^R65+de7Bgzr=QfstTz2=jUMWn*Ext1Yr;IIGGx zsm>ia)a`x<=!CRjbRu60J{h-%kfb_6tG4oYZ>Rs&Mb5Hl*2>s3lBC1Lt z8Te`KKQ0kF9pz(1+A-#lC>u`zF@20@T6)57o1!cm>u!VyB(M+EI==`29KkGQj8W;OH|i0PSj^!=`!(yKJs%J@&cAfVzb0E_< z>rAD<-y33AnS$c!)JGELfId+!uqaI^3&u=wQlx)Ru0+V6RXv4IPVb3GH5G&OTZRo7MqraWf}So zqg}Vc07&eG!+_A*tCd%jq`7RFU%>fa|7friAF7vocV*@$!1z#fR1ZQi7Lbw2DnZUk z4V<=SXOkYO=v5_^#?MpdQire59*W)0hW4bcjtghq2z@w`3ugKdjl@oUge9|7>^v>! z`Fzg9g1e*qPV%24_5bhFAvpj4=@9?lPlq5RigvOG2LpS6`0wcu%(oEmfOuu)U=g%| zOTS32!8P{m4U6Aa3ihQM>NCZz(-c24;#I8Ui(z*?J!!Rg@AhK0#(i%$6M4JbCvY;u zhNK@I^b2j}}@&!MwJX@)s%L;tb zpKG#EA_*B8bI|&d^l&pGjC=-%IF7_$yX$Z8MI`KeB++Qf}c*A zKH7e7FXnb{wjL|5S3@UjA$Ye+HAlJ1wZxXa8uqhbf^1AJEsMUVPX<6%do_f394U7o zz=}fCC{QUDfic}@o+Dh{^?b;`49;*R?M+dC=*5>Mt%}n}&f)1i2m)YPqXzlsLBa76 z^MViCbZL>&TtmKnd*4A5>M`cd=ddg(kJAqLlIrXCF`1Yv0Lach{fr~+G1&cFUd@_Jjl{c*~2Q{9y{W?Xy&Oj9m?0otfFe{ApgRdd^{9k)pgc>47QRJL+r5i&9~^84lN z@16C9UztmpW@U&(S?uPx=q+th*>#xtHEommoiL7N>izfSNg&JSi=Y4d&d$xobKDrC z5V3Hl-}~In5b6nwpx67)7eH?f$(E7w!>@sXFwaAvaQE-Kt)WNe>d@}Tvz@-ou}AH0 z5@Eh~8}D{N4&Z(Oh-&n)>zTjkQvB&;EVKLl>g6Wvc5EUzw}$(t6948$AwYw|cFDwh zj+@rnawZ8&YJN30;OTz%xng2U_}yDzb7C~R8?g3r^?YENzyt8{ zc;8H_dGA`OzRBge#POO-b!#x5wP4>8dVN^4ATSp4_weD!^nM<0pX%~|yIHuc;fW*Z z^lELt8~eS#Py;;7%-!nf?D*CA`|54(rptKq_2KsbsBwbEU47cd3Yn+x?+3feB$GVd zo!w7E2R8)z#SafV0M`|?-0JtinU2=h-6v!gAnvQX?}9_@%K@!@?9KtLL+s5#seSCp z!Tt4Prg7>Fv;R8O@8tH&O^3}!`LV6vSI^40Bs|>)UB)=}x;~LR z^5(?#T_*?#-3&>Ok?dTn@(Ya)N$>wEy{J}xK78}KKHWb6oIj5>kLeTTcsBgXtN>)i zU2?LZ3TM2ZTW<=<7`A+n2fefmTXF&ke!J?5@m-)EYIkSn0t`sj6n(BX))WcQoz}_B zu=ypb#(^!++=nDvhEBnAbKY%$4*M2wy|+Ujc|+rjOOkd0??mAG>+Wx*tA>`n8mGz= zr;t;5x>11q^|9;jgmH#ZyFkO!sjSIuc2TV#2kd>R>z9!-`THlec;LF*^2(TjB_O6V z6+p`a;H_iMCaSJ7Tt(#^3;aIU_GWjkOm>;m3q;XY8k7$U% zu3fS=WgDnD5kADF-8v5coE`a@;a+CAf|{(o^?)O={kME?w_D}U2P`y0y+F>hAg3f6=fa5*qiMILbGuVu!3K*QIwFLy1U4K&dw31g@J_Tof zA^=;L8~Y|L^EvEI1tdOCEO11CP~jXS%90RL$si`5UU= zv!n6{DX%VTp)M7#jU=U&T{BGIZye$V{PPf;+%hNpGK1?#XcbPMcW(*z_dEplS*JT@ zX*9P48Vkig+kZo3i6DH0Y(13MZWS$A>H=KjNcML7yS5enL>$0C*gejE9;%tV0NgtN zJgc$lex;v#q`5VCnFv;*;UT?6!M{wmm7=7loDb!dxZ}+yicds89vneF9+U;WB48;! zcYlSt?Y4w^#WZpaH;DQ9&S`MXT4vuN`DN`=z;i*;rhAvehtQp3FLz=1cBIwXl$`d zaDJ_P7HmrMaA)z*=nQ(Ch+{M$w#eJY{BK|yuF_z9keY3 zgO?9d?~%wgfY9)#*fyf8l~Hf5bzfRBKuxf5(xZ`Rb6F*r50` zAI#t7BAw$Wk8|lM6eeYb)HQ>UVir{E=f!G83daj02eP3+Qd2=i8;B{BtX8tQ!sE66 zWrRVACCK*-Q;}-U5sQVDc&V|As&Yfa8Uf&WSl3`&p}EiV=b6+tnyL;zC4u6}(0&Skf|M$BR%h!HbJi) zd4!wLZd7Ab7OzDF!MnF>*OoXAAr3BNWAx6pB~hgrdJ;ero+;Iu#BY@0R)U6&2bFm& zNY<`Zlfz4`YqIqgw2zjcgX%-5K#MeJldDFrMTocfbEPByxzfA<{CoGIR7YPU5pUGP zS>7?fw^mE%?4PUs_tAEwOB3H=Kp}F!QhK}&+u~``{quvx9oI$3y6_r-${zcjO<^+! z3EHj*=xdK_rfn&l!rjsa`|A3|@O|hg8=yjd8_B}%${L747MdU;@)r2~MVzFz*o64U zDzsAVw*(}^0ljGadqO**#fVBK-MIQt2Ro63sIrt2_phL#@W2-sNJT)6B(sYrW!Uhy zCt2ZovRLcAAhhexSgjh;3G(iL{DCek4Z7NHyF_vgg&+@v|Kf`@_~W}1T321rlHElA za)%Ex!Jk7J;Ut(5#rmgI|8cGaGX?n{&q(z1I(JB!>q%2ye|Ec*hO#7$$SpJng?1z! zEIAMz9n{R(FMP5upei>|68;=NdoJ;}84LW&%x3)Cgirm;)I|8pG?YyI+Z2ic)u5^K zSLqr9rg_RADp3%K784Cr#e(DmzC%F5(ach4MvEtm1vI+UK1rY95hNH|iu{R@6>thE zP$GAMPW~sIfhJgxbX2&836vDEc&!rA2INxAZ9nKi0xUIJ0qEjnd*UnFdi0vHGk zM1|xBj|Fz1LT;nkC5-)*N*_U~L`fE-06c?�RQCL&5-sp+UU{sQ91q>FYoFMERfj zq=ExU2;7E(M4>49JE;;`U1jlFi~dfkuL<&Ef09b#*P$`}>@YAN8j=8*`wEE!tOcFr zzqg=i1l0!qbVM?QuoZxT*nIRA3z&Wi2#$E-TC+WN(w#9?PzlO#;5H5<9r+BlEc;Gm zg8abnH?w~_kTSehjek0j#DBt?AHeng66J0r1H#t-DX8&U@BYW2Hrbnf{3obE@lE=_ z4eEPBz`uh!AR+2o3XOHox-E@)Iv3jhLR>i)qG%ZZaM_;tamOqqBXX zG>mh5m!*z4!kQ1$BVL zIg>_gH7=5`b2k{Y2=z+wc!f;mRpa@Eer8~lnYO!3^{G=E>COkq@lP0!5;5VvSg)~W zVWlk1q*qPNR+bK7EzAD+UpF-oXS>!bhpx?xPkHV^MM;x!N51k%P$RyzEOxeCxKVJc zAkz^KcDo#6#73iNW} zzBXFc?Kx`0gR8W)&2@<#pD1OzFYFSPF9(V2>w{{kZ;_rNjq<(A#Bqts(Wi)lboI(D z@bo*yBPMSf5AT_i;5oG<<=+ly@qSg5EIHSbb~|*Gl$5^g3NiuT0Ah~kKd%NkxCuzG zCWB6*HFqx2`xVf(!LY2}ybHa1q7-3bvoV4(UM&z4gzQ11!#aF1kGQy^iO{RjenP(N zpq&6kaZ#RTGGn-pIo@888dT+pt;PCMO>ZaBiK_L^WyszhY8pc6H4G6z_hc#DZK~ODm%XT5 zk7*75yku3}a~6aT-+*T+dNn=x!J@nLyN;RDJMBHI2Zx zv+4qhC}w7X?o|Db6V^)#;PzV3C29^~ysn@cc@n^umLLMbrW@8%?RTlv9q;+$xe^t{ zY)ld%=tVFa^I4~Z?%yg{rHcC3!*e{1rVLKe1phI9<5v4eD#2h6%90|hY08~sP)el* z8U;W27SW`{!EE_I-eH0A@3JE2FFBmIy8YwlDlp1tu>nsS(7HlF4j7zq;>QNv(tMDq zKr_v==Cx;AnqnN0T? z!XKNylTVg6N+l1tfpi%uY zcvG`V?N{F6VtLdOPE@Ik(c0&N$lrNZhW)%xV<`$U*t{TNdC zpZmE$UQW|l2IwxDWeLtvS$cN##2|x{*PUgK@?N6joYqHMR;$pnz+BAdQSPD0 zv%}orDOo19SUJ_)JpO53ezA-p#Js$%O~#{wAlx?=?S@9vioIbXydh-OO6o#w8@ zSH!8dusii0JQbDGzU*;bdNaAs2=9|8@cz*dq%lZ9Arz2?_%G-{{~zRdz(4W<#1#LQ z6tQkRUJemwc!PNu+TQBSagxD!Ukp(*n`&A$k8p zGz|V*G_Zd9577{K4@ve1SK!S4CdUV-r;Y5K^bWnb3-Uti~$;{KL|VIv*|#pHyk8@!?!>LqGt6+ z3wsO)fnDqW_3l4N<1F{j4u9z8U+|*)cP)Rz3mQm~VgHf#0CESS@;AX*eyOlWYufh9bfI|8g7pU)_b~Kmy$m9mV1LPnD9)1F`>m z_e4LneUfh$WXbCY1BzfnV$(z#gg)8NyInx83)F5o$FV;VJc?c9Iv|5c@u_iUEgd!7 zVTl+_z#n2E{mWzJg~Q+e>+nD1^2djN zLnWvWM{A7^$AgVs3RgG{r}U4FeGBhFqP(^Mu?&*TA1wKAXaoVv@V7Ox#6J+!mQDM& zdHuJUMD>>`(EGP3NA{OlA@jHSUzqp@7D1SpXKOeVFT;sekN|YX0?Bp|n^4h%FvF)P z@()eNgL>BY@PGHLCjB5#>IZ@vBm(+X0jLBCNli!fN1%gxNA$m_q<>gaTPMV14};A$ z!kR29whp6}=xEw!kG)nHc!~tc2bdB0)e(PlG4;(Q_5UL7&7+z+zrRtHR;!5EI-r7y zLzN=ch^Wkoii#Em6%`RAB2`p`FvuKo>O@o!RKTDF;!r>ZK|~o85)~oJkf12DM8+@& z5=hAW?i1~|?fd?|cilhkUGG}0KuFFxd7i!ZXW07$sUooYi)HDvOa1ffH)JRK=&TOt z?a$j?TcqnJcu6U>sp#=;(Jn&r*S&n3CiqtRP!l34b2aN`-H+Y7Crh4;F9@^_b&9rM zpoq6HCR;@7>yvL;m%tGA^kbxKd zdqQ;pzTbM%hkJB?sM>HN30@L6`!8FEwsEf3ilrZGsq4LC+W|RP;Ff6ZM^8(J z&_Pd5Q_qFM2``ws==qZETir|oP?;6u_O)!zSxUP+_esw@?`!r?meLSiE$i>Q8AvXN z=Bk?X86hp9{ioMpt?Y}g4V$Z%+FFDt2F==JQ=4axcTe?~_jFBVvKoWTSe6lyg8m#* z`phP+{P`V26LSg(b%mD)_Iv4Uzxdr|zsVS{FMg9}p#MyonwVO*^ukP&evJRcFVn3# zFFU5cq4h&SYF))_UWHRp#6sykD&mz9hiUze@}7F=(l(KbmhForrnpYT7sQj+-xbN@ zpZVyic{hEqKZ#^jEe7hun?A%4j=HIe8AcKJH3qwjn7ePZheVcn-+tcN-jpY21KS#D z?2QkTFK$rrBWK4{a`@i zQuVC)jIYjaW%P`&UiKVM&d>6ALMkzYO#Qr+8#gh<>=%p;_qqX&(B z5NC1qS+)!IP1NspjJr9h5_jK_E6v=M_BZ_d?xq%P8jG(TUdW6X?W_vwJo4brjSdGF z&8hzr7u#&dU3l+iwCqhYQoe49?ETTu(Gq8gI#@jVDfkdQc}CZhhdD-9!(OKlsX5Y~ zcOhPJ?$)1&?#`Z}Pey)wQW{17(W3Z9$i(t7nq3+34r($XC84TtR>mN6S%=TwL zki3X0;SH9(o3`MX?#rj)?CNH>d(F!mucZIsOPO@rs&m1BVQc!ey@>sfvjk^8S>Z!u zzOirb8CnGdG?X5S4tjx%`Q$ewJ{cJws+9BSHUo}t-J)-W+qNXs%4#FwlhGKFfs&Dq z!8iSP?n{+9ev*Y>z9UH8>|fv;Bty)GsUIH==GyGo$F(Y3*BQtjkd3^EHF9{!h`02d zbn_>AZekIkSRP;|7(@j81`Kg$(hO_IrHuY0Gh(26Ksl==tA6vM+O-e#gc03sg%z<8 zJ+~&Ea&>egJzu!zgjU(mdtFS5@5-3o8lQ}9vWmD_t`8f1k5GeCtbY460Uy7#wt$u%g(T-%wPDIDWldoiy4P13qP@th&B7~WhBeDMt**u z-?h*D=e+CjlTN5l$XyNA9r~lGR;kLEMvf~~BHl+r!yPB2GHeR@`HIDuaoe}oXKnv^ z&rw&4H@uSZaJz#aI%k;HF0;67Q9Jhs<-LLz!S$=fO#kfX@lRWw{Oe-_nXRr?7-!wU zx@9lBwDvjwFpZYB|8gSIV3+P-T-r7Gd4aH~WaLY03$m1Pbn1akpFQtCC*J)(;N~(l#xkjpfS$=x${3gq1h6(O2n~Yjb_C?2hoP((E^Y-jEGP*ozS?-kSjScC~ZRT}9 zFPppr%by<9{AA~iyr&NqUkfc{Sx3>J4Eagg=RqN+lmx&Mu@_SThacc+=%PYcb0uABSz`Sz{Kf#zJ^12A8E&>9OSP zTtwE*Q!7}Ae2~FZ4>c1MZK4q3sajc>O+K5}{8XW;3`?oQ#qn|&td?#cH-x1UD+I!_ z5QbWSMBi2Q_7fl6qdr)q<52Nm^%H(2#RGJ&jWL=?RRjQR}s;~4`+X|r}OVx}hs?`cMOF3FeRMe6j8XcLklc9>y=)B^tkwOC{vbl8D zmAK30h6^U_)H^us7NO?Ad*PWI8xFtWsg%whZ%>rPsoNRU%nCM(T;#46e)1%@$FZh| zPO$!!y*t!6jqPpXqDPHfHRf1bGk$PdmceM6L5(57vJ0CcjB}9Q#!`c( z;?va>=1T6DINFg-WjF`J6!kdrBJ(1H*R_LGdFK|zBf1gy-cmPZ&)k`(V_aGj&we`K zRNmam&L7`XK6Os(y!|%=?k^{Cf-i}K`V!WhyX{$}$ex{5erwInT9>L5g0&pElytCS zbi)O+sD0@M4x1LibJ~mcDB;{ap-w|@4yL>J4c_mWm&Y=udJDTxHCtz6 zqdyE9l&@1uDvw18eI}nVi`txyZom_}SW?NBrhM3v3RU{- zhuzPN`mLPmut$E&fgjS0`0LeIRu;5BGf@TP+)*$ze_f4UGM11 zrfb2f$9`S)xT#9|+StII=0$s!&kXh4_WN(IP8J(swM4b8f!WFI>V!4-?!xBh8$5iM z9EeSdsc+lM+FfwhlOsbPx)u0znMVO>=zdRTF>v1GwY(Zz^UcU$>xpxb@?u(}9A~B}C12XBpK#wyEpweg3F+ zBInMm*$~DjEZl0n1Isx#42_Wm!~y!|vDfrmR*1~}k|L?}7>jIUKk=`nO@6X@H8##+ z@zNhG(_;j%4DQKKf@K>rk4C;TbRfR<~tqxJSjZP|x2AW@n{){&rfy+0W1V z{yQ5dG=)N)nl_F!86QQjxmOcNUdiIfh|B36VRzdskqIj-yQ|Rb%d)6vN<8y>g3ju| zM&y6ph=_T}>8OztQy_koJB{{UFiKs!FFBAdat2@$$59BW!Zc7 z;;L@SUsRl6W~kWtF>K%8TsGF29E)_Gw%>E-32Ip!$H+0iXQch{w!H^u)OS|9u-U^j zA44rYg#L^%_Q!3nsuz16FCbOqW{W~O1GUzxs1zeh?TH)N31gbv>B1XhZnWN2;eDBN z7J7cWLb|JBiu~8*vs(?mRR=cpsaL9?WWNqdC&OSw%som$%BZY|u^mx+G`s z@p(Ufx6r9PB<=7zWT8{+SZKP`uZqtyciK>6s>xNeu2cozcw!1^_j{9L6xSJ_KAIQ? zklifp8>~JS-1Xu#LoxE^1alX3jGNc74_|JC=XoK{GwMg1=&hHW_K)^;{st=&78LO8 zGch`rGc)(fqT%wZZxhfx8M4SKIRAM$MApsLLET7+8$=PN4i&-v+WtWhPp;ocR<%!pK< zQL2r|QwuhGP!nif_~%0gDV)*?|0%J{a@eU(ifqw4x?UabuV7y1RcuB~sVoykE{;U} zx7^%vaN53(ohMdWhNoHYYP<4nDOw^@`(1DP%!XK>j>dYig^#e0{D`~1MAnB};e^ci z)LC8Rd_HA|rBdwsM4+tvS;6;+3vRo^^n?#!awdQwWtgO5a ziKtt#(;Pm7atbEqNkrtrVAjRR=;f-z;s{y4Hk< zISp4vVS$b0fJC?I(@zHO~g=Z8}>W=>S+>6`Gj&E!8Q+J(U|)r)>ZJ#r>xSD2znC;}3K- zpZ)`mHljJ2@Y-(~CAFTek+&%W_L|5UFCP%v-odbh>jUs(xSU9ADyxgai8WYuqL}X zCn$b35C&pyq~}O2;OA_gT4b0>Aa?QthBn>sh)5l#C@P&LC)3+T2By|J7sxu) zB`40Rv2#gIK@K&X?GOR~MKkNHbW+48 zrEeaTcxIGr5opfG30)Udp83GkeP_x@MS>%}sd;`*y5>P+CsmnM$ET0;a~@*)24kGl z$p~ByCv@K!vz4iN#L27pmZjzyJJ5rsjGXL?afS!ibP+QXsU$(m-!E-%Xe}~z-}m); z;HdDcZa7OwxiMVpNfI3B>w`O_rJ^Yc2a|2qSIEBg1dfBC<=~C}t~$zkp9hDKW2gJ} zZ?h{24*oPKc$9lWId)71Z2F{lJ?9A~|E9cjeV)hOf=!lvsb>ZSB`23(dI~wY zUiA1q9lQS4rQDm;E5{y2OvVs?zQs;H9`%U1rgjXYiqbad~T(S*&ai zr(@)?*t+lF;xXE$vHHxz&#+@IGkTL#_EI|Ta|0?0aQ7wMCKq+;)S}ghi&`&M_Un`} ziLKUqQl0u4y-$6TTiUFvG72AdY=fuoVgz5O<@_)FOj?_HQ(e%)`i`FV{Sd?xSB_MNMb$jx z4-ftrwl}={jL-Y`CdlWGU(=jrbL!>nvU{~T3)9R?Jodn+afCPRxVWJFKox)B)TWQC z%Qsb)cN;J*Iz^|_NpWxQ?U}ZFL9NMW&lwkP;NReS$N7BE_kqj^e1K~P`}BY)@+6g>!=J1jIIB8$r*>; zMFH$*B`@!!_9c`3pSbhV5C_g!eXk zkz4A9D+qF3GMc2e@1E1i3NTVjBQ{QUqQEn`3wBChr;#s`>Q%8eu7*fm&W>$oBPfj@dnBQjLg8|Ey zJX>nC$^a+%+;c9^rUQ?yeJF0BH%Cje=*mmVEf#F;u?h=pO{z$p>Xg*P%J)wieQmd5 z%HVEFKh_Il6_FGu?NMhdNrSJ*mBAiNBfijI;mjFK6JD^F))1eIts>fKKh3B&Y8L6% zhffY&q0gvPWd(dBZRG{;_c@9b#XJ_BFs@A2UC1$(9~D}qB~zJW4S9kai8ljUPgo;| zJ8xLcZ!3(kBU(QIAZC!gRC!n?H4k3}syb?1H*L9al-o+6ghRYNm!5e!aG|X|W9}v^;WTqjH z;nz!PwZ>SXhwsu~6LD@8RB}%fFW1n^choC;LJb3sCtD|T3L9u?nxQj>9zFP}U06>t zZ#9xYWlE=roQirR9`nrZ>2kzbap52CSSuR$Z<~#4JEhxKkbln>>5kP?<|sb!V;3lM ztVeye+Nq6MV=H67;E}F7I7((mT)_L%@pSs&s}U!Q0zLV?0I?y^X@i_cvv5_^mM_5zfKUw*}dUPe1mSU>402%3tVc1!nSW+@yyx}(E( z9IOd%qxc7Yypu4_ukIeQoRB&@R&2;7CtHr}!x(y7;5JCn3-kM^ts6Py`U=xUUUN~k zmlHnfezT;`w00XUv1bCuOQ>OK3 z*o>*P?~iLOM)P$O&+-CcTBH=f8_u&T=ze|k{RU|JA1m(5TtxuDvOk?{*3 z$#JE&f_mtS;n^NP(IUzO z^sL+~cS_)0^ZULycHNQi4@E^|gc~iI&mq$Ef2FCsgROICi@c+ctJYzSx(?O9MBhI} zXK)`T9Kjq7?NNqv{odQ+fANY~&9meOr5#G*Rx~mih+oh8m~gD6zyW`?72!ePq>LpB zYrF`PkQKVhKvNS46&wEALUI9@1jw-=KGbx9idG$wH{;N?9Ys zDx*F?)Bvjk`(QI{^V!c=AX*p_G5?4;#CQZBZ+oe7Qb(TfT00)wwS4G95$SP47&2=B z_SQ}EdOTh6fuv&IY`f#gIs;Wlz@jdICFfOrTkXdzV_l@8m~h&>`JAj2L2w2N7G5FC z^D~cw(yuCpLhR-KX@oso!!M2sZ@a@4tT`U%C)R!AJxHIDjpgrsjz{Ctx@NdWF4|DK zg~&E5ZN!{1$O-Vp$(*FyD5arBx{=v|Q07NfOh(%s9PcRYTJgkLNP(VcCuC{)lu`@# z`;0Y=jXVn?oHA^cGkl$$U5F+!uq}`AwRepZnRjAWt%o>e|RR`Ie3hfbL4jv-uW5RnwY^gk1x7S<8 zZ&m$ec&nc;Za@HW^jcL0VS&K+Sfin%NWJ^qXS7XnHZFO5+Pl{gC*1Hc6z4qLRNe@-d@?*~ZHE||@LFYWqOSBR zmi&O+wg=y7i;|Kq5A6mg{QWcT(ljo1_ZjJJ>k87WX_^zw{9Nz=-}xg(hIAK1G6EL= zZeAb>rEeG2h+Ex8YglkDK)M$9swuF}F*(AE&as(Ey02|{^9hM@3C<0z!kLpRaJna< ze9)M`zPt_58|gayCG@VMuAunr$Zugira6lkKxf#lU8i)rlhG(7LX>r6(mR4qw_lLP z`x`>Z_rjb-PzZL>{Y5vjd*wK!nki$kdxcA!^fq7!*$GmZyq}|bqq;da64)y1@@^peXP!G`W}BGL+9{wZpDFSMl;YH^*`I=_x?#Ij(y0;&*;EH4I0ljMYXLS26P?^X}d~tGGtcZBJqE` z7NS>j0)6tRX#>#4BGUKB3V3c_rr-@+bF+%pWDN8m90TNnpR;d~88Or# z$~)?A{_W=taGCfAx+gW*g&p`f0`-e;v3;Rh2U3avwfm;wCv{XFrrVCj-k~*XNvuQh zj2If03!or947?2^Tkq(BUU&U&6j8VeDowEi?vR_V`juZb^FJI&*za1JMt)1pRxXUF zu$}if!}|V2pz{0+w!DoL!mntgIss@D2D{1rn~l*H9M{rD4sh-*a+khZ*zqE`{Y7wvGe$<2FnE46 zR2_`!XVDV!l=9+EYIo59?^SAvDN!(ZWJ0g#^>(|s!D^~ugFC#R;wN?<@@z0$JOCL*w;O^6BkXVykCtQ{9A#UYV+zYQADwYiO^ zX?fTviqn9808?mwlAsO_M^>Yl!{Z~LdGl9EgJZ;Zs;ey+9uyO(iK;aap3?VFh^kmX zP2(I?*c1i9Qi_}wVh49~q)~(WIMNu^-c{ijX#ww$w^O>VtD*W4`3RqU+Yc(%Jx1I# zJLPr$Pc_))bF{&U%0pp2f}k?-OW_5oiuw4t&0!$$U*qqlVQnei4N8#-6BeJ2BsxX- z+Z;BR#&>IX&CUrrr@BjiQ<&2nkU+Ih=8;?~{>Kw_teq0|=5cq4TPOW@taLYRoAl~2(u>xdn&(jmsYRpIkUiFr2Wsm4HD z5NAkX#a_%vUsVV!*iA>YhSanQcWDc~l=IYM5jWdt%)HdK)}s^~bl1Z_XwZ(lo<6o( zy#Q1V6R>=XI;2k5+bi;jp*g$1=S~01ahbpf3V>)PI& z%;Q>f5c4jn#T#RbzDntwo=OYHg$&q5mf&P)Pc11(c?{@>&86_R_pQMm7+87L8L9W7 zTNq{DxF`^~7#G5!gu$BbWs{`~g5rM3>!K1U$xEd=9chXWIjV@KZ9ulRL{XVGUtWt> zd@W(H((Wnp>@>7?wzwlzW)SHHTr0_;ovB1wHII1EOdY9#ahG}#WFR{;06VpU$LJ3} zgqx2EpD&4;p&MELJxU_y>mAPtsOtzt=`<>r%2a7|<@WHlrDfj_!aa1ZmCOl1ipL(S z%-j@&8PZ|D{uW6yMpgV7Fj@gQ9_C9FA?T?rA9csI-OcHUYdhj-gRFLIidN00$n!c7 z^z!4Q;%3{;W9aBbR-=>wGNGsh=)MkHaC3dn5YLq+IEqLJA;CcY)-wl{e-&VsvRL5n@7oH|2Ssr-Jl>dUK=&QtI%j=azr zTISVphl>fYMt^V13x6vLqK3U|EbJ*LgXho(Ev9UcT+j3O6_{T^pE>|V=QBLh!rgPJ zq5IM|#vQRBYgwcN*8yx0!Knw3wn$u3Csa0;bLVW@^y6Cdk%r*zPOgP=^2i>1fJKRL zF}6u(&MIPIg08gY8Ozf#V*a)cNBOeOPDltAQFT=fQSaq;5!Dms!3NTSsjx2(!+I3u8r5F+SahWK=x z;)>XFlWEVd1V*4}Pw)r)8`)G6z?o9v*hVKo;kvH=!d)p}+F4rHD*(8NXxpyI{Dn)$ zLb?i=SL|040hP)ZDsq5K@r;1OGZF(Ma#_E4AxDtCoRI}qBd=A=pz>LuEn=J@6X)v! z=`d{t{;ouhoNrG9lBJ6hIx`gdy-@VS0s1vyFO_N>R`wmT%Vs%@wqY+W32o+t~xd%k~usf(_Z zS1%t+MuA5QO(Gwj9nfWxeAg4Z&>lhZg#m0^mYsSB#oEYV5N9Ct>3icWO=Hw@kzGvK z%IDf+uWcEW$tVj;(Z5XqKA>#;6w(d{8dRJ?kr&sPvoQx1&7dsra3iOT+gbF#CmglT z64{4sx2jV{Fl$Q3wliP88L5Scus(w#Z$ad;7DoZ^5u>=tSNv^A{1c3u zv~3n3P1-wza0DK)=bai92dXTY^yoSTpt}PF$UE3sz;tN9bbw&WXNfjiu)PP~Xp4Nr z{l>7t{Zk$Ta0j+TL1hCTu8|?I$KS+ZLLklgh?Wj=%B=Lh;#nSL7e@AUR;3=Lw}3N# z8?@obMgaYebHbVsK!z+V#xCpu)Uh)npVCrB%GfzL^H`T+{^(JnE-DHISv*j&^@G5B z#BZ6D9$2%&QdtWiBwek~2{&+rd@^?j5!@bnA8O#p7_U}TwyysI6#?iO*p1)gzA-{{ zbWyjXs&8YJ8C-nF?}GwVNT)UN0Mac&Z2Ig;5EGH%)sAS4c!JDQ?WOb!{Po+9n#%(> z!=D=yNUz6_Q7AZnI~3eS1|kTUJnR`X24pY54T&)XH%XJ29@cB=9b3W?#-DGH6rqzj zUq9cusFN_B7wEn_EX7guJ+43g9G)n4sA(HcgAD~?de^VmHNtt+_!YVpl7Y}ii zV+ij_Hc<#mjA+18u1tseF4u#QG9W<8`)f!uV1_2;rAG&=>>vOn$?#f%8DJWZ1mcs$ zTl?SgT^GUL^Q+bnT_29tp96z3Qp7RoYc}sirNftA02OUZwu%J`aouR z+5I|SbtiTc=uQF&bm!3)eM``-cy!SUflvRXD-eFfX%K@bnfz#sHClyQMRIu>u(zSO z>3Yaev^+6>c8<86hAx$r6zFtV?03?8iVw7)1)Ulv?H&R_sk{b0moQ_vMxuZ{vf$K1 z{a9M|BijoVjZUk?8}P<7V1c_=sWwMu5VBRpA<9Da>dOe{)A8b&TM=Jf_;buboc{bq zE(>}|Bn#rp$QYjr|Jz`q?WV+f-o`1lD~PTUU{%nV19=;ud~l`PxICb|oO8%CHF&j6 z2=I&Bz;y<)NbX-ko+aXN{`MXKI&TSNZp7^8cNa520v0Z5y%>b^k zh)mfgFotj-V4*nW`<@YlgM35x3z{Y)C{Klw4l?Q(l&JDR)FM!iGY_|~8y_FCO?9jj zYExC<;h1t!`$-_+>vP2SC_B`)(xceR5F`>&P8*FP(YFMDb+nSA7zJ2*fFUp>Sj{7HiG}_Lmkf59s@A$*3rp zcS>z}zU6f7t@2rxpznj%2o;~jLx!hYAfw;-96a{*VZ~467%@CZ9~0GPcB9`6-YlqA zosR|G&-Z*rxYN-+!0pOKj|g3f50~mEjZ_pG+;az2SE++qw$0lvqpVGIULi19eGpW+>k227oXM}C@kgMn+< z%`jV+O9t;Cm{Yoovgu5~DmC4X#)x9a-ysxa^pr&Y6UlS2Y2JI^B_-cdBWdQ zFfSiu>y-GsWG1ny2l;>DK22?LpV>S2_q5dsjT#whsw9+#@C?` z3&{+R;&s3XCjIp7eL0a!vV$R{+U2F0IR2pc0w2t z?x2Lgwcv{)n?7a^(H!ANaYlgoN)G`*@xkZD^~80RS-r^|?rnMYTu-c$OmweW%E&`-IDRgKPf?xiY=bT8abi_bS zh5}y^z`sx#b$Fx@E3~B|toVX;mSaWb$$12b_wMbe0*M@&)jv)GrK190kB`rl@nEGC z$6=))VIVVjI$%%9UioRFWa-%vVMkFLT#+wI9eF~XW}qWstG-k11@A)dZ>?i-fWv;t z2;)Qnh23LepFysozRMx$@P#JW=i-ooceDa?RcGbNQ7DoHI9rsSO8WPqSh<=u{fO4W z750YiNu)d?N>bbif1oV2WBpU`90FS=qeaPrYB8W47US#^vXSO^1o%hL0acR=;TIqW zjJ4oy{u}avVd_?FK@Rr0zvZF0zx8k252IX^6-zg3Kx8?1E<~BwN_ijM`RI<~q1q;j zUV*SCgV!g02;zTy1<+XNo#45~i(u^u&|0H1Ygq|#vyl)qXO0@ovsBbIi*^8JNO=|{ z+*s;RC9X#U)t3ChGLpH+u0-JGx0mErde0ZH{v-NzN))fe6=CP!&>Qnssv6%{De zpa+zp8ouH}IJ({s4*xP(Fc z4fUe0lWJNyVcWWb6h^qg?F@ra=}!@76z^!w_BKSQSQhFdU@Y@|m#hjZhPq6#fgmt- zyz!a&k_B~d9B7GFKNd&;pVgo@4$ZpPildM(=M}(kTG)}9xZyy>L^a?3C-j{ofeU9S zw@A}?ipZZ~7b$4_p_OL`XHns=w|#A5eHqV!22*#W0RjZ-K9^R0-*JWths)kbG_TS_ zks5(&UzKU80sx`2cSBaFnCIIDuovr_EEvDy;ysGd!;wLc%SGEuHLh|Q29^*tm689r z%B7kY;*$WKgK*`}V80q*6c5}+AvBNZcAkT0g99iwj6oUhE(UIB7tcZf?>@}oz`rbJ z!U@!3mi_^_AsK;!l3EGWHyTr}u@C|3kN+F$5#a0AAfr~vo?}hi6k$WlK5P5LI5Xdr zlcCNzsL;S9t^u#iVsZCZtcN%p%ljwPhYjuKV!{56HOCtRA5I2VDsn;FYSD1Hy;e$- zjC+M=gg^}t^q)vn9?I!w*7J0lNBgb!s}8jG2!vB4OO7_q zkT2=#wxvQHs~Dn2UJDS_@VCG5Z_qO`gR1C3k3N9@{tn4FImjh%3bKGB8#HNzUwTDw zLYv?#U+mjo%G_3DAs1yepkLYE{cpU_g&u9$4V+^zeKy*M_E~lX1)2PxHlaza|G?zG z+N~ze4n15q7nCcwIpl!Nr}(g=OPdDLSW`|A{prUYRlWy4XoG3^V(ohh;EkzH6P&4+ zdZG$<5%p$gub#0Ou6#{XqnYW21j|qu(#lkH!%k9UvX&5)t6jgTm&hHse zHf9(Mg(zC-gDw&aXY0Rcx4-q?RZ@@(bln8TYYQF%ptX$giXr_lx#L+-oj$6nCrP2t zLQ7oR1M1wl9P|@d!asIqpydRrM>M4=pzIV%{hcwYfh;pLCvdpmHxS*MZo7|Dnas`y zD(IqEtlFmrCOX${m<5|FeUxnm4$vs7*AC#oh`J!H^b;Fa#UT*QXeSQ425xv;6qz0G z!Q2m()3B8M2v(W?Y79>6m0CIuen25KAjOBl1{*9J*$ha=HvWoa-_Hgl3vwTfHkt zSOTuXC;&!jDjoUL?9L35#Y2G7G{5+nxq4F)j7D)?7ro zay*Z&1-9z9;6tJ8uh=uf{r)ml_+j!WyeBjD%fHkuo*njA-?Yy2|G95^RJlvDhy|Ly zX~%lB^#D>g6bN)TDo#bT$vfeODG;{5;QThA4SCur0M1`nU31X>N!Lm`xOFmXyGQ+I zP_F&(C(Qdzco0v}oB{s=>>oldVMSc1RIn68cccqQN=@6O6j49IJ^R{pohXG=Nf~g7^uaWv1c*z{3h-|5P|DOQ?{A6nZ)qxj0aweO^;fUPKsPb4 zc$+{XUp53uvP=zcZ<#uiK;wjkMp`(@bD%^=dV|qtE8ts|;v&ObzC&Xn)-%Xj(-a7@ zIb7J&FF}Rm#hkV_1PdaOKDaTGUwqf^l%R(#dcB*0a~0p>b}g%N=OR#~lW8Hp5`l8< ztkXeV5(*On!eZ#ky~y{c1M5m9yWmJ5J6c-Da+~#b0-_y3c5_A!_Cd>hn?E7>IB~6q zx*|v$ElfoYQRMxUUNeLNg8}^NARuf=k1|pVu2qmXA6yUAT#PlWC}kX7_=9RTM|_)^ z*XkOKAn%6liFG%>pmtl}WVG?%#hRcthU$-if&7@T4lVm}Q1%ZH=cBUvQ69zBvfsAU z?lL+pArNGMzC~KS!3s{9j#8?sKycmbJn^sz2sFVZW;Zw#He|e*#-UV<*6K!vEuK8` z5ZASVP!W=L%{&WeT?tVa3WoTD7868NxLU~>KAxk-A2*jzDQ^xEN^}`1J@|qgDS*9* zUZl~SXX|6VR|g`_4(aDe|Y#l}CFFt5fyC zA5`uU7WMT@>P`Z!;}^Ts$7@Vwj~*Ny}ugyLei*M9+Or2No@B(#4^asKHWrn(J0kP}POK;*aG z5lD&SgKAJ?|I*J;`S6-90Ql=agML2dR+Cy>KZS4Fe~rH$b=?YhMc?sFqmZ700Ed0` z1wcz!^{c`DmfS)Z@MeUs{PL%WJD`-bk;`EpviLgu&{xtJ6jkY5^12;df`QmGM(-TE zL&_MpmoD)~tZ&$bc{I4MxXVnet;cmJ+ei4#0V-W}^)5wwWgMdTyzdS7o`L3e2Hc-X z^2NWq77oP)_U^(kKhHYSaffBN=7Sk?(4B{bCh%rFm6+~bX#%0%|3!XtS{!+NIemcO zX_`Qt5SZUjKT=(qs~n*(7;8Jwv6QBTRJKzPXFpV}k9UDXsA^5RimJxQnm4pluAmyp7tbqA zaEEWB^78wRj+?K#oiBW*R}xZ5vTEBrn4pqQ)C?M(TZ7I*>3c!b9vT~{wD6%@q%NgY zB3*xGkoP-?cOknS2Gdmc=?ZY0Ey|)tD~zyjFRQ2y-e(B*Rf6AOkkW4-a1FJYGV)&04HchWG>dPq+lpHCO^MoBTFvWQA@^tXI@c zDhX8J6kk*YG8?ydp4jBtaNgEtHZ)Of>qax->JamV`pnX&C*tH1BaKnt<2Mhi9o1#T8V8z@B^BhKAlUGBtF0VDGK(ujgBb3aWq#CrF88jP( zuRP+0Zxc9;w$gNj-eeEsd9Y_&V9#V7om}JYcMR&hZ_SP6(479y@EZ2xmvLx$K_7>Q z-*p!RR%?zk6g2_^Fd;<&ZOFGs*YCPxIWT&W9}N(#*e<e0zkuQhc ziD)X+;im!bl=KE6=p2b2$6m+KMjTT54rAarJpw;%Co4`&p!nm@ki0+ zrshWCUUzn;aM6X)cN=-D9u8`CI#ML_`zRnPDEh8nu39jEG-AMFt^(_v3OpTG@j4|ALHB+tE%g*s~b^I*|N>_Fvp(t~@3f9!BT@mlPC z95gAP@}1%VeRM7B7sH6-sy*lu?}BGboh|r;K4|pf{V3D;3ij7=r+lK(X6aSd$sc49 zs*}q;(uhUhiRS_EF@Fd5?NAUNbY2m~7IkL@@1ydNMeg2wg(3F0!)jCjDxixf2OE2P zoG1kn`I)oDGn(Q7c{6KwF(`A15!m+O2=OgEN#h2RUNI_=?T#aRpm^Ya$q?^h8W|$( zWRLNNcOrYjQT#b(U@F>rb-xde_jbpQPwo61#hi`5vxN2pxfHreaw+sMz1)D`!fzi1 zJfR9%qLK%Sie-RT?-+kN?@)-QU-wLl_r9{)mtU?UDCeo`_a6a(X)vrJ)ORLQ79nEzG&L7^(-nL)xi~f7C z*L_V3c!V`5LL&|v?vvZxR6cxtxs@3HJW%b_vGgD-|9Mf5TA$7Z>iP-{GjLuqH*SNP zHMkXrQm|@L$P2Xp++EsxRAlV805ox2KrTP#x7MfoF{)E$%Z=P$H)1~WcOD=0YF)h* zNLFNK2zkd)dPK(_JZcp+&-mS(KP#}dWCXEim@Yx7asrS$SgO%q`C z!HI;#%V3}_MUs3GjFZ&eBfO9~kYV{!3U^1qKDkNm0+8ns&jBms)vW}x7rK}Uw7o$T zBeTyL&j~Bdl072#_--p5hXD#x$G&j{rr-h@d)R1k4BN-oLu=#^bRPeUG;=a^pY=_e z6~B)~YfPoa_bQMsKnI8$aZt?v%T$&Li++b7YMHL_r_)h?8Xa=o`5%AUEZJY-qL8M- zqM23I{J+&|>3`3-TKJx$MeWsEi6ogdd6eumFE1c(zYzKi=O;JUMMG~lMXX)J57X;* zY(0+l?wF7CL5mS(_qr^)QCdN;bS4ctKL&OghivH z6$?>Wc*7Z*?FFr=tof^C;dpQiOjG9+;EKrpp6aS;6`wsj_HH8sXPj=SzM(hU$p#C2*a!K%&O_rK7Vn%13`x>&f*x$BYK7>@ zUH|v>D)5ibN$)|ohKKscN044JZk2!7M<}S*+9{LEO0r&#?PyD4cr!OoQu9L&9AM1D zbn)>sM#DtQul;0u8omU?C5QiiSUK|16keTcJbh zA)-&Cq7Z^PQrP2-fKGfRUcncGs{o!UOeDhG$utyW!zQ8Ol&xjLgdgOaLCSm`p-uYF zu+(Z5_+*^CPMv1n}B~igL3GQ+)(%?mGr}C?XbI z0rS}qRtIYlyZRr-Ao71WgM>Z4p{0~JC@{EuQeK1zmmhD4L)Qdb1?0DVh7?@TtGX$o zt9x(*c4#k(@&*(P`fcbdc-^&jckxoVTSuhJonAyb$c=l~s&K#Y8C{4QwlbgCE!7tG zj&XMqdE-*O`VPe5t_R^zm_g3?A%`5rtIt0W^Y642RwUL`!)*o|KGKrg7b?$p6{IvP zLL2nkP|HwSUFtzP5B@uYUE2Bs!K_lebvz(@(&sC~$#HHoGzFUzU!k|Ei<&|j5H!SF zxsM_i^U)E$f>|#`*sjTs0#+gTkoquNsO_!@CUvEeStn#xu?sp-Lo#FhEgEi;>TsrYlCSIlj;$uCqghn&V%opLl;f_I^0$bWt|ZwnkRArz}UGoCMRGORs^)X zIaXWb1f!}qr=vGc9NYiY4t1DOrrvGQnHNxpc*5Nn5#b|cWKOULcqGUX3XF){f%{qD z1{=Car`grl+E&`ty|&?=!j|ZJ%u#-r^pXeV^@;W52rX4NG~5?p#FG`(q{zz5TimE< z)qw$>@no1TC&Avof_X^7VkVe+H=y(&v7B+JdnqG8tgSjwCy%lTQG>V(4wyKy2F7d9 z=9C6<^#gIk?v&df^Jx9z#(58bjI>3ou7$yCDemQie@RD^s{~A_7zD=uelZOtV!zz{&|1+$Dmqen& z?{-M=SjspmZFb*9J5yn`3;!Myb@MulB!D;QR9{tsm#~zVUt)DjjJVwkLF&PyU7!w5-iq z%MlaS?7M_Yi^Xs3rEj}N;ntWWg{;oc2rInfjj&S#I_3|!D8ka=p!$1Jx8_^-$+{Dq zix3TkQiDs}z(V839j(f`Fnsjino`QJ+i;+u*>CJo=N)xMNVFd|Y3U+2l80vIJi7-| zp|L1do`7Y|V0e`L2_(l}pDqB%*R;XAz4+E)tN0(Ts^LsOe24 z+zf6f5bZ&IUj}&kW$3*GZ-B6LT=?ceqxM>gz-S%!6{AZrP3R%Wauy*MruK@C!K`VA zZRAQ5hX!pu$Y9R!t3&6ZV*sh%pQNu*O;JZSg~eu? zf@P)h2K@q4`QY=QmeHDy%y%r^=6xSDT^P8zb~tXu@VxDm3Sz?%Dn^-)3I(NvKLxX+=WjfH%{bJFLZ?N zsVn`WelmlM{EEKdp2B*{gh=LhFGn60XWbWPrHnlGJ3xTK$VvrGS>*dbi4KyOp93Z( z;YoD7)GuWx2k9A!G%eIcC?Pna;=!WG%9f8dI~23Nwg(R+MiXaNX#w;Q2Q zf4!*zi%u+X^=97}&>f-EWv!b9${RlX`(ahcF4Yp=1?mjeXdV%Z-ikp)MI9zm-vi|B(JYED46EVL&=1y#U+->)h|2Oa(?IKIv3T?fHoy6QN$Te7sP+Xg@a64+5! z3=T40;IDxfiDaq{Ys@G0tm3a>%l`vajQ)ZZR=BE7J>}mYQuW}L|D%c@CQL{(nlQoO z>t`utVZYZ#QVzH}b(qhk2#9wc?R2hwygu#40HyK5yaU07e_pTAaeT00hhzStbo%O& z5*DQ^`uFWOV!ZDB^1sOY?r6BeuU#b~LJ*?&9-Yy_sT?_KMD>;8HFyK8X{GpD`pe)hAU{ho97YqHfaE+KibhOhj? z{O*{dR$8uW&@Z4>);V^$z+d*-AS2*x$rqeTyrFc!^p@rM5hZ;?p(e$0k^^)exBi?d zL7-1sQJ{Z^gbgsaIEjj({K!viq-1Mze0aU%-Wr2!M=XV&>+TcU9G@g-Br!^FmA|WF z+?OcHJ`xYv4B#pIehrlyGAB>FVgOnw`Q~b_8lMi2`EoQZD79=L+k=Da%p~Dm>syEI zrLSQ2%`2)t89$8=(+rR6`C6j$rm7a)h?e9|3N`a4D1bK{7pZcuL%|IAj+vj~lq9>G z9z$mH@wef5ZKU53yn{#nxJ`!kME#xy{l%Zwr{?pxMyHBe@b5To& zbVr7SKVT}C_LIKD`2u(7&w8L)$Dyd#PI#dvvF_b``ys!?Wu445;qb$h3K_EExTuix z{(E7l7e2k(W@nvWECrY>p8tpp!^0)TWXJnl^hY)j!%f@hn4oNE!@2=;?-MIL;OeS# zA*{s{ZA3#|b@8X}GU0mZS{n6&<;j$Ncp+X4`w0;Cl9XQkg|JG2%Hs5wzi5+=j6V*> zvO~u9p-sm>RxdgL4pykqPLH`B@eCCUf8o3kl)D~0%`q2!-+YAh zom7mYk^1l!2e*#rRDu$V5$;kUFbKKl!}0gKRQMB=55-JtesZCAyDNEY(kwQW-5D_N0;gLhH&jruu()azRAR%J#uX zj2VGmRwy8RuTocXrTmJx;hvTa<_%+GPI!^QOfa|w8VBbp!OD$RH#|~l(tzITY$}|j zJ0bil)fUxSK1u30%dCx|kz6C?`%~ql18~adhYI&Mb9-}t)2cQ95JoV}hJWA?!%cA! zP)Fl7G42kH{jjD{)6op%el`lQ5dI?7;(D)=NphiLM9jeFWU@!g{xfrvh4Y#Iu*GJX z*Qg=*pcdzxFoO!-N%82yM-i@{srkah1h0P555=Vll)ov%BhbwfEcVcaX@w`wE9F$^ z0^cf{!RA?m*BhMnR(Cjom*G`n4J7W>RUJ5@aiaHLi&L&S`02B-;Yk_6jUoXRoxidw z`1M@avxk0~k`%qHLNTVvA|Y z7T#ad3MjqzC85Ce#Vx^R4oT$AOP^T_K&s+b#m!5XCOa|1cGz(BPlH9bgwmp* z$?l&@c?XZbG*uiiDVBLW7-cLcet7d?Gfi()EAPrPG@x#nkKgf@K#b~=*z0$Z@<{HF z_m$X#X+?@zPY(;n48x6oi9bmn=RC!19%c#>7@+^w=?kYPw-hQRJiXezJ==E{F$Z|G z#>^h9K$wU#D@ggui0WWM(Kn4YaxUM5;+_y02TZ?EBcigSGJ|)k=p@)sp0S8}t>}b= zdVI`0U96vO===Mdi85BMT-0OM7wh-yAja=e@W1Az@k5;9l3dy!#{317gs)PL3+SjH zQhZd3RGnT6Z4o!MnHTZmIlG|}iE{#2Shpv`X5B7l`tneeGhwp>kwitZwkre~7_VeC zZn~N#T=g5;=V)~W?em`4X^;?Ecxlj$`&I5ajEL!#50tySC$!*1Vq+DDGJg3@R21%y z8CG>Eh~bRx!hTQ~`i^~&$o=yr=Cf-t3cL%rNm0z*Cf@Vqu?=!_4(#wUys~?Mj*dvU z$6wqBR^Y}9;KnG-se8^0%Hqe^4i7sqUMgQ=s+BV^_5fb5bl_uq@@Y>gWW6%qtzlr- zn%ZJCr#$*jh>u;1J%q78DTEc55rT9633l9Q4q^L67YM+qELjXPxq&G7b7K2k6#ceoB#|Xg`FJP^<@}UJX~y+ zC7&cRhlwPg632C3epr!ps1m%P28@X9jZyB{6be^)XdY33v2{p^+KDh}DY8rN>j<5BsckW8h zl4Mnnc`Oq7Z7ZKiiUnv2GH5B2H`G@v7D;CBcj>RjQpeo(m!csE3+)sAV2pLEr#>@i zSVI{$I+@wX9T#gIDP|+)|2p#V~RA4r+D(dH#c!Ho*CqhFj(%qP;F|>};c%hOj|EW|AQ#_mO4`+sxounEcQ=81A=NQdZjOBfL*W(QEHE<^<2^CF@h2xBcSY#?; zPKB-?$&a*ZP;LGOjmzoHBX5(LW9xkLaN-sxmYB*MYPxQI%ZH-_?E4(|S_HYFdW-k= zdsedQvQY>^L;W;B6tlfH;bw8VdHbt|l)14Q>sb@q?DS&!jJ?UGy93so_~M>Da&|{l z*y)=vrW0)w*#SjK;G(^>^6WJmh5ASY&oSnjB%7yX@#)m4@^M&#?ad*NUXKL_|Dwz@ zr)r_0d$J!Bex7)ujE#?;*ues;7Pc{-D}0&a_w!lL;mJU`;y+f=t1k1EYtYa7po}%F zlQ3il-`q7eX}=mNXOI*jLnp=|KSn-k!O{CA)3+!l0`H3rKI?4dDtA$tgO7YW?TphV zI!bD-G<;*&c4`n_P1JLrm@9bx^~&{sD~y_!(M~m)QR|H@3yAlpb~sZ-@)+B{PH{lY zy!bOMh$Ag=P=T1A@Tk|v8zS+4_BY$BJLurEz!~y}rcwE~U?ZcKUaT)4*Lk+;_q@HQ z{2ux|#{T{E9x;1MbC`<@fOih2AJXAx1H5Id^3NM(c@Wm1FFOBAmx< z)xg(ovI0HrDt&;_V{+?z?>q5l@EY2F^lvlIFo91pByax)%1%uXUcVG+ zi}xGOAhC6goJkmMZk%d9kjcZL;RtY-&dVYuA+2~6)+)GcZ?GUYt47;)9y0BTy_NIY zclwiBHZ7i%DWm9dYD!L8^qIdT+qJwWRulKWtxvxxM%z+S4!+%6j%(dgyNrWR?HG-2 z`rtj5ykyl0-~~*5Pve^3+1Yrf|LXr%fEBEFI|=^&Pi_0h7kokC|MP0B2LErXu}bz4 zdSPH=VDvr8c;*id$;uN4Z@n?md--aTYWZp@z@hxn6S8oeB9+|4FczOE#I8GaQ+HRt z=&g9iH&*`iO;2fhD;=SGt0k7LXCHq3h@Y{|~NidG) zL6VB3n{4bg+x)=V44)eo3-B=5L$G-LxA~EMj`^s4@FqQW1 zq$gG<0+&P1&{}X0=6~F1G(J$6CPY89tWhwDkk*NRx~K)Ly_}B84wZO8j#06R5%n&P zDT3hCi0Gld&2xgmi0Aa4L0dSJJ^8Qo9wmJ+)RV~%D7LJx5?gxnt}TQ#QBe28mq{m? zCuJ4duPn+EqpSPrG};=i9d0SFIF7jnfIwD=>Hhv5Y7Kc<~|< zZ58pd1u+sx0Ai{qC;5rEvr2f40uM1pEABmIWmC|86oHb>s>+UbmT6#Z){E(SSNrX`&?42l^{7c^FUrXPOJ+ZW-eYl`IJ1*gFUrR)6RGm|@F>I&bYI!c8 zDnH6l@6Rk3pD?j!W!QL%QB%yk8M4Y=*a(|*8OXgh_pX`T&8R@KV zDkp2YLVI$VWPKHPj-pHwN>Xo}R-fKOPBAi6esSbtX2z`=3lFYn`Xv!RXy_`ibr<}x zTw;0r%>Rt`zs)orXJ?$P_yGe$Rtg(~>Aw=}Ka4oUKz8Tb296e&QuIomWi#^|1nQH? zvUBp-covOuJ((NrNS$@f&8v-twJKMbwj+<5>p^L^e9H1A=Dk3T@sj3(Y`aSi<#5Ia ziTe}j*PDm8tKFSfC#7=N`^#d7D|ff;HQhIxv0w?~W#IburoH9v?3|+&wN z|3pv)PyyuMak{~~(Qk7HcfCCqs-FJwrn(m;}jPC0MGdRrY@b+@k{O)uN_QUNK%`bO#%pZEv zy>do>%iwmad>QY(l~pOF@)@|j&bx#5UEWRrS38_zi@=Fe_w`Us*Y$Z#=*i}m9QyCb zaVY>?+_rajf+yhzy6<|?Zg;573G=(OMf45B%_%6!mc)Q-viKiFT`e7}cQv`t&(;{K@8*@9?wHPTzpCDZRq6p2c)DYU<@j|gK*+^1&=GVIZ|(;e zd2bZ@#IjFXD&$iTXvv)3yvA8c+-;x^M(wl(pZH#_wjJGBrTvww-pYG;%b5ebx-5;q zYb*~24dc_Gz4+h&U_^KGx_{vskA~{b!PQ#hQ)q|x5C0@tQ!*FVShM_L{v7f* zFD2}!R8z0mNY}oWU80WPzP!4$$@F}qo8zNh9dzO8&Hu@=tw-+JkII6ZH;on9-d70r z(AbkB;3QTvIzyBGH^?qaO+_7>`n!j+X7kVQq<)?3B;PNOaYm>Jep)loL8bZ;U_ysy z8xao6IS?@w{qQyy&J1Q7Tgb4pPw5?8#W-CCZbJ(hE(($Pl<^}Bn-w^N>`gg3!gibz zOl+F*TTR?KXyDUelW1 zR#Wxvq0gBR0Z$QtcE)i)mvvIKk3|O>GPYO8paIQNt4G-KiCbslx9>PbtAX=2Fv9lQ zik6)wUX}N}Gcm5?kU^twW!2A>|fIU%z+b1fK%F$Zu7r3}$i!lWTEx*1%0 z=*V^#a*!vBY9`24rzXqiVEP5~kL$;lThEPrx&y4a8eRkuFr_%hB2A?&w=|8;P-{s} zw?!QYB@V|&NZ`Zy+Ki`>>f{u3!RJT%@nA9Th&J+P(ilrdO~;e^WDN%YJ``?qjf~|D zwp0l{beMAac#t(~N-M!Y?uBsZoYo$9Y(LGi#|Kl*7<+KlH18nNwnpp(ccw~EL)luN zerRH9CX%*vNjocR(rd0sdV$6PFJ@@_lR}BC@|+nkVZFOobc3CsX5~2SZ#_-NlBL8> zr#^=qw{D*Qf-o(-9PjHgH(v@K+6+Ib$oN2{V&BzbM2NR@FPH0j^YQmCR^uAdT%Rtw2NvF2hjLcAM-}x#YL6^d*@eM7jN*agPVzl%`-g*xy}?& za3%t}?RAPs1Gwj2DRxfwH{v~RO^_JIbU@Qr9lD{vv&{Vdy4vP~qK*MCbF|(8MBHy& z+wm~^&sU@%LV2?4mx{WSKpWtLk90ci?v5PN$ja#{H@YZNwtSBIXd&aH%ckt+>WNwv`@ zs5!+rBq%9T9Wz!x@)&%|(oQQROAp->^crXK3VI$Qr5S8%r`e7Obh+o|-hxCNOvyCH zG{;@y27SAOjRCi~thGT6&{3OFBci@hooF?iOw%n_gv;up{m6&X#nEi9L19@0b*qD# zv3SWp6OGpAB+dLC@=Y2l{ft7;&nS%CmkG?KuM-1dHr(hReD*o~p85n%f?DA6xL&_; zgDYe&jBhQewPp-NhjfYUjmMyFKWHp=7-69sApk}Fne6(kcsjr&s*yy|AS&6{&-r1y%lCun-l-*Okx8GZ1VUKn6_h;o?@w9x56k>& zpm`k<-VW$4HYkd|0L@@TWIcyphqU1GGR_EAd={HB{{%ABY+x*s(kioP7G$050*J^a zE9`fze}RuT1VpdB!Gn4aq(0tDp3n)ZB<-bu?3`Di7g@ZhI?ay;S&cu=DKgENDF3s~ ztXl~|@}S>iNW4S66H98$8E+IS{p=DXg_cmrcuX}u^o%zrH>bgm-16dG>wsi25iLl7 zAQDs5h3f;X=jfI})OybX|AB4Nq1(U{wg*0TGhO&`NL%Lu(BEy<=pZ}ez6TGpPlung z2X*G;wvfsZgTMoiq0>zTB0oN12RmWZrpIUeOyrftwN~_Kh=un6(;U!XBW-!p;t>3T z2!dw%)i5sx-7M#2X{gH+@g9faK~cOkpm+TTm{4GZG6*B&``TKL%=ir}R19$S{N?qs zTm=I;E$?RwnYY^dtyXegnoT|=F_Ioc@Y9$g@I}8dg)5{Q|JPZVLW$28_-o``RF>La zIOkfD3Ovpk^u@8WFeUco)*$a`v6*@0Q4{cF#`f@vDQx?4C_W(+y}0lqdeq8sjs*1o zHmhsw=ut`PuW}_suh)FcgRJ=q2c8VIN(MO%sc&|P+E}mq7S0nwcVY3LB(3?Z5aVjL zu&U17p+;N8YFj5*E>Z^d7xMI(I0e$Z8s6I!N;Hp>IlJ;*I}N+H#WyfCj}Jv7jBGY# zAIvl8+*cL~{cvq0)D^2xf^2jrT6hk0w?NNl!Pr%ZO9-`@34O2-L5}KFKa7xpWZ;Dq z*`6D*ez2L5CGqc5pU?s4rM_qrluYv&Tt790(RyB`yC4kV<)CFV1VQKxMK?)u1-cu+ zH|V2!tA1DpsZ&kn^nz_wlMIa9L%wxpPMlF99%7LUd|=PL6+JQbx`eB2r5u;yfSXNl}zf2*h|v7Uo>|?BLhhjbkhm| zwL-^fN=B-~Wv8rxZ{}t6JQ(I}&SYc~Sh>RjGzVEaM|~%m=g3QC=&5Xsj1ztbDZ%H@ z2A}GD%G5p`7GLLT0C)yghc^?o*ePU>)#i(&fCQ=olv|v zynMZGYp!+)`XSv@EN`e#3b4*VS`Z-pvrL?+s9pq~P0EU(n;6s7VXC~$CS3_aS*g5| z*-5!XqGd@iXGplk@1{8&r06yo<({sU^GkWCEh>K!sOYe-e{Vg#XS>y-R&wm{&nxM5 zT);~hYNnz2n>cjvIW!`0G)rc(a5IO&IRWZbpf~o9rciTdCjVTr!D&uy6B)TT@%XFU zW+ydBr3pJ?RZ4L93N0kQoEMwL4&(|is`m8JzFita`G$XMW1}-EeEPaQ2cuEo8WaO9 zr67~62@P!$SK@-aqC>Kk~oEuRu>zu zL2CsyP^T<%EzQ$|{1c>&MnIE78Y zcqChj^Q7BUm-Q|-Rn!xNs~urAoS5Z| zqOpBJTFCi%>`4B-Rg;DNTO}jv#i_AHEhbxFH_=cO5$$h%AhvcW4lZ>RH=hINFXm8E znHkOYZt1V=D?hH_#zxDnL_U`J=BN04KX)iSjLO9M+J#+*A@!*~i!~o9Vs9Wzpx__> z56`;u>CS-O=UuvZg9I^vw`R#17t2P|;02nu?l=dkwl^{BcJcXOir%Wj;%~fWJd(1! ze~lC&h>GPIgW-Zq+m_jiNHio;qlz94Bu3DX)9D;SAWWG>Ic8@iyNW59CA z5B7{H@$KjI$3WV$N)&?H#Gcp=^)dc1PCz5X-x%?4x~HfBeri;;d^fyKZf?FQDm6r; zejbA+irqSRR{t4&~7)xsGtAHoH0JZG$4u6Q4W^=4TP-itNL^WX{;2+z8#g9c3)Yhy}-~Zt| zry(Ss9%zHM^#4@N8W!(Exi!~3BT5dXcw!XzAB75`NeOM31%nmaf5=rx zv=4MdE24a&Gvk5E^~j1=;^tNa*~H7jVs{2ohK#O2M^(%(l5epsuo^o*$L zkh#!e&Z4gK*Vi8{2m5pE*##12emjKS@JdQa#^B-rn>XR}!}4W)H0=G`r`5KS+a8FAcrH#tFxMCC?A>tDs)C z^ukGTCajZ)`4=n^Th8WEpif-WMXLez>c=Zf`gF&?MQ_-x0u6vO`c@X&nclM{-e+da z4Elp6>?fR&2C(}0XOey6QPMvd?JUt_>CZ^6ZlCXe*04DcMDSz$=;~wAuPOacI6^KF z)`9u0!@vA?+;I*kTFt6WQSeKLqHI-St6D0W7_yTU50mIyoO15s+|0mpBgyC0E-aVlo?{5 zV~Y#W1VS+S&YBc#Va^9Pxl6|0zH)9~KDkcO%ebvdFYil}ksv4{N9$n=f7D8@tgJ2x z>w?aXL&^3jY%Omtv*Qxh6CF%zZ9pY5JRj-`D&dTp;AO{LFd0t)EKrLq;Ie-f^x3Bw zRzA3F0)e1LA%gXs+kNDQ8>Jy+{n=-LK*v*1lI@?{o`F04OU%Ij0WF;JXh`d~%`SGG z^4qRHq)754`{Hk0W#WHHYe-_Dm&o&yu5sJEjYJ1E7jPh;%?b=_RfSpvKarS@!S+F= zCgakoo5wN8OxUJueobK~dy+*Br}cD>fO&Fha7?0m4b`R~3g7Oa3n+>VQqLN22RY{L z0ZZ1Q6IPvv&80|#SPEI~=T0b?D{_k_$bxeHUuKt9u0`P45wNiiM5>+6raxBSPjb;z za)azV`*jtV0Ctn~jM^pyB~>|z+kVT(85e%_zF3L9eWvgrcexeJCq^$sWWW&(<9?>o zOG+514-$3&FqaPrx!4w#EvZQ|G5?Y?vVAyHa8FT*4s!m3es|l|TQ|^KOmg@CY-k%O z5@6UfAk~238)v$aKL4JP5_ssT(BZ`ZH-*9Vi%iJVtlM!eWs9z>?Ie}vl5VdpP*3UH z-<3GKIFsL1063;WyLdeTI($~yy%K12&qy`%Li%kt$+xQKe)-?KU=T}Qq8qxWAOZceX@fIr z$)CQ?X1JjH2S=bO`OPDWot*k@H@H72w7adqn?_Pw;CEE(;QHfLZl%&bN(l6Xcw-}& zwB`92G7OY#s3j-*IuBK9oO51=gasdC#iiY*U)a!iFDTTYGuQf`=}Z2X2sRX@oY9{P}gO%|LXPna+mLMeFup7xuOB1Huw@Cn8vdFDi=p zO24(9ocFZ%5h%vQCrI-XJUoy6_LlJ5tJz`~J8Zv`ch-e}-j%o<@$cJ-$h^LJmliw(f)&jsRsv+_lAy=8=KVGq!Z(M9LlBL(+0UY z&+z^s@ft?fFvko6Ujl+rO3k!0F3*eaP)~O+d)##=G|{Fj9Tw z>ylz<6%%yW0+4yN%K%7Z!jv*y1`C9@7bKHaV{3laJGRR>FhfsVg-n|9royHyg)q>1DS9VO?XV@gSxz5zH6#(W@UJqd$o zAh!6~JfW^c&#q|Jr(@rIxqiemliD3-W3=uTeDW&+xEYcQIlroDkJ`XJjP4tG#*IhT z9jZR~ib_`OO@N9#O?!SEv0i_bvK;!STNesOk>{6@0L4}yM}4me6Z?C^>d*3QXMh@; zQ^sxm)Z8><8;VWKS^4jkgPCJ53DbwU0qytOo%*z{N-?^@I|u^(V!$;oHD$-?f(#Lb}3#^%5z%23S4F2wZ8*v-bK1-Ht0kb^Bk zHclkNS=FOF8|xxL&T-b5lr3Ec?x&rDEl7*A zZG?r!$hen_oeLhc5L{u&%4aC#VGCopM2xvF-xbyRkQb-0c*F z+zui?Z^6;FRJtjdd}mP2%Fw|)e^7T*nfIv|sd>2hZQI@46w;|u#cDt<=!QITL;TWC z=_YFTXoT?xq~vxY^lZaEgatRh#k#ooRa2z7fTS_AHQ$VpZV68HUB=hIwbI>j(mZ_H zkcp6+C&}4*=VB_V<)P5Nte|c{ZCDGcJ6AUPQjw!3+Wh{YP7t5v$fUQ#bs+t4Uww6n z%+~q!lvGx-OG>Em(dCmz+mDG4=fBtAPYXe=!XMe-Ib~Px{hQmh(v^7F=DEHn_0%g) z?aBHiZtX&d{40CdU@K+Qyl?fal-tdcOCcstUQL$ zI%3zDgqypGJ*e0jQuNHf*Dpmer7>aR>gn)}2%e`8-kI2}ulB=}MzPfH9R-Y8mYhHNeHK*fHJA+xY-UM`4Olx?- z|IBYwpazrp&49`{Q5AK`MIb)Z(YTK}iD8yBl@$+RMO4RERH)!*?^@cSEK>!wJBvnO z8ge-7I6S$~82l(w*XdK3bH_<@12I%?9G*QbeaT!G>s)+FrMN>bnsKTkTH7h%GorNn z5~&^-Jxqi@Vt#9oFM|)ObFG9Z)qXs~oM>?6RDQI>z_N@eS2A+~ls<7-wVIkxr}isV zw9^%9bkxicGi7uG)p5-|Ex7I2bJ)1tHx>tb$o`D=E^IA;?vqRG@~ZlusqW{>o6&RM znIlIn?nwB~XRy#SJ@^~j5vEte+0n+){W=`91#ZG|&Tj$}Y%?L#QZ&Ygf)C?G^cCN( zW#pp=r-GB75*m^dYWc|}MX=>d%@%acTTi%i+P~F7tniNIG=Aq<%{hHc?3?m_YwYby zCSeb>QIFI#fa5G3)8XAMc3Qv@C?A=Ac95b|$lVz2i|4Zcee^5ispvOSi1H&OWsyWN z+7i0vfuECCRAkh z1;p2)Lj>C`Wc9;f^l(*U%cA*fO&%JzK-9-^DQIUtK(}EKrD~7m+;wlCG0t3SnTK)U zvcE9~gXC?-+r)SioWwtrrvvFRHnB?zMP?*r+twRwf>)8!3-s~%dRgk>%HLNv&J}Fz zZ7}3yzjCC<53VX2t0)a^aq+com8ZSSM)(#HrKw0AM63l`!t{-JqLI7Xg1k!WFujag zmP8pmfJ91U33vFYRHpARq>LloWn)>bCYm;Z3`t4bztfP5irGKpH7>Wt9=t=U`blizhMlw|AQGQ)o>BR&{lIpDum?{nDkh5Q1mq zAv(D^?y$|d<7(w2JA%D-hQ+Pc%*Okx#cB~aP&7E4w8Lk->CSx_b4}Djl(u^JTh;{Z zqLk)%WUW_Rh&-1Zgp-T=dAF`oY9KQ%gQt(pnjQy`PoQ4Uh5qv`*Pyw_PR4OQF&>cL z#|*Hn2Ic~pqh=Iy@40j{m#&YC9nEofm;d@2D3J9cQphCdDDoMeIN@P>jCJf%Z(t5E zKv1F~E@1Z4FNiQBG0Xs$3C=JV2*DhveR6F!W+FK?)E zh;4oz_boACyOaWUz8HIX3ytVs8)91ocyzBsKApG@Tvj}Eb6|Vl> z(~s{F8gjr28_4!OWamUqqB7&K4h07q6lwpGl}l_u!77|6Z6u^fkcGeZF*+opDL48{ z^DQg6Tx9(R`q#L$H?eh%s%nORnE={i>Jash6UK)@wn=TjTr11C2lq&`{Ap<)NSsUZ zKk}3~GgjRTlApWgY5tfn_v^NkA1v&l|H0!}m*F&8Y>gPF*o;;QL-|{WeBb^bf8V_L zG_UFB$_@j&YFUkub;6-zwxftN=Ze(TKHG^24l{8k&&G3W<=ib}mz$DYG*!_bRR#+SyA_Xl@L~ z&{F*5bRZhKp&4sIkVgu?G4`M(uqO^;M$2`P**$=MT@<=1x=(e&HXGBS?ftxP3Gzu( zRbjV>#_RZ}|0)eH8(D_EaCMWsthmQ@tEzmK#$eWz91G^O0gV$`koq2Lt5v|Lj*({{gQ@tq z)Fy3w5YEJ>xwyJYGYLi=Ez%aqrskRu_H$p)!gipR-XX$dJad5vaq4X-*gIbOPKP>j zRxdD`C2CJ(&!OOXLdi6MWLlbLEL9>T#MKK@z2f3Y6uP&Jj?Xa=hxI;dkX?))V1I&fXP9>}1B{8>psNSM{1TFw__5Hwg>Zd2(SZ z2GPL1rBisN7IT`<<1ofrz2#*u|3oLZbtQcRbw<78oa8ElrYnM8m3mXe9K9#Oxc$j$hI z+mz#)PyD;*664W09`Lprb2!#^N|7)Fl$KFF0=R$^o4>WkrN0C)rZjrr2MJ_g{Rx zG$TE@9KxYCPiIOSPV}qrI=>TTC8-P zy7v_Fs$mOUfUM-SpH8D;{@W-WrCD?Iktmnkqo?bCJ`5f?l4N_X35Qa*i`ECxENEq7 ztS#lvAtj^r=KtLGC3Kl=U=bml2GXL>Cn=uVHzzoeJlEHGk8(X7d0<$|{UYyr&93y` z6^~B3XAXg@L(=JZ&}#UNpM#7jm^?CE2#w#JR=j<53#?vSc}2-(0VA~NyT2n0A<+DJ z&#nWmqBy%d7+vRq*l+758)f4Nh*%wSFzVM#*3U<)&UY%}`qGueB9)q9%Da*Qo z%}4VDpdc`U^jCJaB!^h5Q?|d^d5q&H%WNm=)t(!iTkLoz3A~-V`%)N-y1d01F!57X zo86vOAXZ~oi|KBx)NVpXZ}m;jnI zopYpM6Bi1_@WtuVtHv(3V7eE|%uEY>U`ZfRKnwCPSmXG*X;{!*T+ZwcI*2c5C{F*Vi_9ldLqWO2=OKkL++Bcjw<>x_K}ux$aoYonW@V@3+g-e9pc9 zQ0j;GdlgBQb;q!1m8B2D!$*ed<}IJI3A~EF<&mtetP;J(8oF`De|%teDH7Ty9pAMX`CwlI89My2e=8sQNb1pw z;{^o2RMKLruXLcD{%DBOgvsGhzs=0c6~}h2U$98yA+FS)uUNd7op9w&?r{=N>4Yzx zjpq^42cfy-2(Pyr(az7{_N6mz&a?rM%j7^zaQ4(f569^-4>Po|IUyj>-TUEiBYg-H z1KPf<@ap&QxuK@iqtEA1@~asuJ}CR^_koudA&9x+qchA-jp~7w^5z`tu+AmXadryd z2;=2nmqo5{f1HR84!E@xOQbH*6|Fx>qUNCw%pSY`$BM<4OE7=$7u`uNq|O}Qc>pj( zpi$Xe7_{m9)95GZ*Ty;o^#s1%Vm^U`ZR`WZLh#J!OU=J) zNuBg3Uqr=u8?{>E1!WS%!`=)({_6y+D_2`^3~C{S=NM!sSqj}}XL%X&uqP~t#NEa8 zg%-n{YrXz%Z$Q$=c`Hf(;zDz+cq*g~Usi5zAdz?j$tD2}El7_opPR{y?A-vq0-{%6 z$cR(pvSBW2=RFkcMXHx=W(=u49A$k)v%`m}X|CFH4>37+Nv1!(b-w&Yo$dhmlrbF2 z{}CsDH1+!QIeF;vv*w)O%eM!EbTavSZ;brj9~a3yeoB@1a`)p9mi%SW34O7uypD%C z6K7w|eV>`1cFT~#{*fsv*L=?5a*_qU;wJMs&fp@V6o)O3G!VbK^cMH*gXh0~c7}_J z>kcn%^PP{=s3yg;JZbg8^QC75@Jwe`ICH|JnHy~)?s4KRwx|XN-oBH4DziEqDFjnj z6Xf*?rdVU`(0m7JL?CLYC&#S~SE;em!~>6N+`rkHGX=DNEvEV8YczfTeD+otJDO|o zS=f5u=1fwKwFdrjB(kBkovnjJ{xZ@y39NU2BJ*8j?aoO`hcehoa8(ej&VRljk~_?! z)USY7B-}~BfR#wk#?pr@AYCbbF2G*b^9V-5?&k1iH)GOYT=}KE($L>#v-kaN;Y`vK zNMD%mr&C?l8g_gIl z%r$#dIc8&8Y0COFD|!pOfZU=5snt^HKNga1T}w}ORv)}sJ)2^C_LoKgvRHlI`z@F& zMCy++M)XMk<Q zw>a<8JdUGkR3hXCZtdjRl79UKhjV7(=kNDX>b3i6Go}ZGCtAln`&Z0{d#(c2rGIku zW#z?(k51x#Ku%`oHk|>*!E>9MOV$np4sQzO94B*|hf2!UeA#d0QNw*1vWy)~9z1SU zUS!zLG;*1B@p>t<4-{%uiQ-S52gw_Bo-}m`|8~)MryvtV$7_>N^F3@mUS_!KzFk*5 zL70_B_XqD&A4Hdw5>1`m#pr2GPFF z@*F^4Q)+Mo>zet_DQ*67>!K47B*Nu*%pWn5LG^+ZA70u`TT7;~eyVceEn%@g@NxD$ z73n$lC%a$ksyDmS^Hv?15u5RfkOrdr>*|YuudZ4XkN`RETtHug%{mY0Oo$Y@y%f{ZxCm z)rdRv#h_Z)wF)9d~1-IwW~o-^VOf z$mQk2^ zB!Bl~j}Ibf=gLj7sQ=tAjT@xr4ar$kdMRLD>*d~}`rU(l@F1!5bM*O^6CE*c`87t* zOZW66vfm*FHnNf!hg^v@tuBQ%u%2gT;WI?b{W?U#J9K8F?-3i1_#!2JHOdl@lYGt3 zLxChxvSm2zNh#ta^~f1wMAfbP+cbZy8aD<%U&tQ(oNLW6E)}$$?kC$;H6eeLe=&;4W0oH^&*=bWeB&vWnV&N(Nq zFQP|lF>wnE-ZW0k?SHaUYoVvflCoV5o%Y!kCsKFx1|&ZoUaq5?0f&ZoqE$2xHDQ3!Ix=rwcqReo@hK9BNY=bK#4|->j#wy8%3&M7KjADr2nd8E z|tQfP%x8Jeo zdzkd4ZSO%;@I&6dd+76NUHqY|Q%!(DkT$QURh_F;>oRWtjDMLow#onjHdg(N->4YX z)Pn+}7ygDKSGgAPvU?kCBl&r7^Qc2Xcjqnqm`672gRmASCg^>1!!N*v{#QBCHtg}i zL(1!yZ^R%;1bm10{a!JZi!1&vPR?Uq9;&#o#4kk9V^;c!MRE;v4I3RqRPD++?uq+p zi{7AI64Wo*o_P1SKlWFuz}Hw`38gU*T~=G*S)42K9cy?}tXzTXW8^UBSH`b4MuRu4 zH~q3wG^#*WdHk(&hg3Vj8>&uF-pWf|FZ9`p=8DF%dgYW@y2oStRIELfU?W1dvSAES z+VjNtHFm|pTFO~n62pOBPSQ;*`P4DPLO{*upmUU6d{={p=II7#ZSqpxdi&(+xBlkJ z@lVJ3Fg3Sui&EN-9yAQCtfPA;-l+zw zxsPLLjR~+^%6YLFnKT#A%rw_B)0~(M@g+~p@XOO|Ne1B?z;y}xDuj*!(f1bV0&AWe z&lCuX_-w*&{;F%?mA&fg-LDtidRXH%$kLCRQ>178l+D$cL8uL6>S%7C*Qb`E3aQY# zeYdXT>uT*e-a3V_e%`?!7#G2MtgngdbKUeAJ*7R(o!R0wa{iL9m@t{rxp*WUH!^X? zXO1?c>~U9CFi^>im3}!HN}0|Qbn)8nUeGHly}0$RPt62x8It-_EKEB+dhAok#|#My zQ_KRe&T1UcGcLPyL`4ItgxR{Yus3LYH6FjSEJibAX-} zD#J0u&BcrE_Um*-kT%$5@(Iz?R^?T456o|m&oo!Hl_4uDDe}*{Bh-KJhl}G{T!$*q z4Gc(#xjv9Ps;TxycM|)Bewtcm+<(tC#7*_gNck>3fSr3!q~qZkOU&A)#6!uLpl( z+Kb9zLDj^=pQ}Z&x2s4br|E9CGwkjVg!G2cqoWGs=QyTK3ONRBT0p&1M;Ic)%;$+HT^Ed2#>g(NQ+C85V^TZ^5I zi3Uy^J!ZjD&Ts?$LCT=tWLeKKP#1BPIkXnVEJmXBH&?2xo7a)@>@)z})U`S5m$2XW zLM`jlMV{qK$3rhmSUGxs{MdoNoQ(_TO}IeY;sptEths;TMGn3+1G`NJzK&}kmf})t*Ot8 z{*A_NlM>SDtIwIwO{Rc?p5StHZ^s%;;7zP{0_N_@dSgGDYzZNWmf zx4O$E>D*oOB~g0T2RwzVNzs-DD9_0}^z#N*`vN}4xF({k7C$VeGk)L)-CGO|Z=2)kg@h z%52n~wj$^EASPCjTY2%!1s<%RqC?}Lzi4OT^hIP__{$rS5Dn6r)&llIiPZy>uthLgz`F}jJLD3s!7El4(VSYb zo)=mOgia`t(ot@(OwSv_lPu)I%kjnt%^|rmccBj6bW!{flc*Bd$v1R67s5biQgYn0 z-x+mQZpK8!*U0QqjvkGu9e4OKe{pI13fA1WlLt~O9MYzXFxSYF0MQ?q-#n!WXPLLC z7nD!aqE4xtL%InJ*+QJ!{Q~w%+6)dn_G?xatY9CvFF*cjiEhn5Ub`J6B~1S9d^ioi zL`gNgkCnx*i#!>CL(3G|A@0CLhV>>KTJVgnaKczZEb9XvA&2$v+fj0v%lbRw<&L)M zA0G*vSf3QkoSK}5aqBAuTdKW@ldkCG)r`a0l-r@@7r zqoKd??qs0y=SObXz#NIuVT8*E{U*Fr){CNrn(=Y$GmEtu@hhl>&*?K|mLOKc&KX#G zrTT;6DT0}XN?y5i6Ozo;DN}7W+EK_Ja=PU)HL)H6GPh#jy0M}_`$_%R%0~^KL^!|D zF$~|nvoP7n__UxfJbDH?{n7L@5dt)gh#jMt{*ac$DQ27Oww(+YNXim; z0vf-{k@t8oCH)CA0Ud^twmUYl?48ac@ovWj>xF2Y3DcgVw$;F<^Cuec-7d+`#WXJ1 z(tMlKL=db}fS)jPhPMh*G;e1 zan`$ig<`XmDN>Ae#*zMBIx{Yke&u}lupBT#3ItZaq}&kMvnL*XjJ94OCB~uWMR_n& zCQ#?3KWs3T5LoOxC1QS=-o@JWZrT2s7}HoyoQvY$7g&;P<6h_aKDG$q_g{Q_O6hvw z*&q!wV>2m4@MK68A|~mB4z6YHHrQn@r1#QP4_gR%cb*ko&XMJZ*82Avts8=IMy_#(8?D^rEr@hBSQi#@TwOG9sOFRp|5jpAWKeOF`@K6-ug& z!!>Lw|0z(VlY)r2l0wRt(KrF)l%mq0cU=dx zw^@WmBGL$SQl&KmV??_yeawLCq|}sJj^*nbSCpLrjy4 zE||?*f87xBNzrDZ5uLS`$5BdRwob*7o5_2U+0bU)7(1>)**JiUk^fYMo`#hrQ1&D~ z%qEb*L`9Y1wCQtfRapVRVuKr3VgJzTcdN3CT3G=T%a2s-08lh44LVDrFT?PI#xes!^4zFRRhX%B-o%_F=;3e6<$)zNV^D7wr_f z)+Xik&;T#B6cXYJ_RqH_Emp6>D@PQXQqhT5a6Xjw>w7ZsdCY_7-AB;%k(#BT2HXo+ z|L*y{IB6+*n(##Xv%x#VVqqdF#!nqvQVvPVDQe@yCqGU`6?(BxHKxtr@S!XKY8D{G1)uC%xwmV<@!=EnC@5~wO$R6C-d8KA+Er#>0f^NAukrJ0hHep+(|d!dGi*mXRc(0y&+Q(2dC>b zebVONf3RB|b=@TfPg|}R1i>%?@w2X{P^q(1`ZG*K0n<`UZy?0-zRX@4-I+eZoNEc% z7ue}nNO8aoyLr_f^G3S%+MEGl?vJg~&Yp6Pm|T)cChz5s7Udxt5LmlVrV)&Tak)FO zCBl38i()idbZ8voVS4WBj}s&M>KbDFOlXR6VFB)3hm0W<12jFNwloVtu`&JpQylwL z{jXsc`_}5B$;^Rua6u6p)5c)+Z(!5m3{xWCg%0?kI@1QY1FMToDeDX*4^no4SA3@#2khu!%41&|AAe#RbAmX_NP0# zYKq*IM}leGEMe#^sQWL6Y(XQ_0ZVPIOvow>jTsUILwmriXu@(5+erG9H-JEoCotP% zg3KU|Z=?PXc|69R_|;O=BZv?jO<4nWb9yVgc1gU~zSka8Q`f(@DXl+OEZCK50$23ZvVHOo|YzU-5zQNIS zf$q%V$^T2;{FhZ@&%WVdYV=)f!-MOJJ?iuKB&U}{rBR#^JF{OzCMRTNrpDPG4q%fJ zR_wCKreU4Ex%Pj#s1#=8RX?z#J?2E0lD1(fvY=H z4Ofq6^a}x#_dnGBOt8qvp!0VsvM;X#`cOP-1n97TsW64Xlvz|-X)3+lGg28gJgRht zqEu2n#0+-o$r;07>P?vW6?Pw)=9cN@JWMxuGImon;h@|7&*N(EwT)T4J)oHCY_sdTE|B(c?OPUnkeh?4XCe)s?of~ zhKaf3Z85r#4CJm|Jg1q&fmyom?lLZs4QzF{nA6|}#nSil5AbPH4m_b>d*_ZP9N!jQ zH!s?GP4O@pHfX*(r`DRu&sv^|3)Jh~l%$fhrYSHD@G5dbm;od5^Cu0Qs;z`^G*FUK z(_|a7vjw4YP~s*3{*h?e(3$uUPkp9u)mNelX668#BpqAG!O8;~CKROse|BYQX zqfS;>1cSVpw|qWv>#V)UOunF$jLf5-4sr6gO# z>+;yyz5Cmo)3x=7z7-dScnG*uiiF6&-Tg-n;6f6keu5@Lp;rBDdijm7~f+(skk;1c`mqeOo~6{{(~P?x?P(;o|R!{GXN5c!Ww?gQk` zY2TT7Krf2qgbHh(_0ys|fR%RuG`z9ac$xI>n90x7S+GCr-m9e6e?@i zyvkcjbT5ZC04zNo z{x4?x8}m~B`_f+FR;v87V#J-VkIS$-voclZxt?FoD)m6W(z`M5=J%q-6UNM=@tIB* zr`OQFa0OpOJF-re8DIRnd(ZEE7(o(P5f~3zS>-A6p#DsO_?@9i0;9m)+D}|gR}+XP zx95%L_=I?0LwR@&Qdd8D0r14*>fqck-B5}v`z^tEM{wB7R< zk7g%TlB=z_`>&FO$?10#rn9P)je7o4Eq{Z?Q1#7dfEO}Gibes@EXQ`Rot4i{%F`!y z2oAVfr{D)mouSg+rAjHEaLz4wA+^u6zxgWGWZjs}JhY>~90}}HV%A_upy#OdjEF-u6xxow<6J0TwRcn~`2`b_aijWj$x@2Pdu_ZL_^8S$pmv zr?*Lvl|9nt^!{M0hEQR7q7DC;_5%-@TId-0F!G_wBDb%Nw1eQxNXMyq>=U}$Yvnu& zgw0SM;|36f*@OJiBLDj`Bbn?J^0v4kr$JD;{4)RGlGF#3Uis6}g49+K?r1nRC0G+D zx*=_9O%`Kxmv#__2P|nU*fppsO>WLsRnbmJWM?Tjs(Ov%(0$rz(?}@I(PKrI6$!Qv ziE_Cb`*r$#=U3ZovMhW7q>qUD_iR#8v%y3SE&S+oZeS z^8C75)Zbub**#L@lh8{Fe~^nqhWF!nhh=`59#+}wFA0{-Wz5)0PG7PuC(4eoH=Thm zrItHoJvh;>U+R^njxEn+CRrB}O~+L7VofE_1`^YZ*aY?L8b(5Mgas#kX2k>o4DMCY zyl@u9!O(y3m{D1(ZcYA8|InCDL=}UPcfGEyw_1F*{z+hF^Qw*}tNW=x>9GD-epnl} zFT<|!ukAeW4H(ikK3|ve1z6-tMRx`eTMiLKY|cEeS!bjGn=MC#x8M0ASXxQt?m8YT02ojIthEF@kgO=&?+A&zbpFql6Cz9yMgJ4 zA1~&_UZ;|>RB9T0ta33T8n1EI|17&gWw2A(ZEqNwkM2W1TW1N0$S3mBn+4Qb<-O!5w7le+SIMtKcSszvIOZ#_)p6{?C0g}fAc#jj{1BUMC| zb(Kq!qOo=@mDet-^{5X^D!l77r?A>5Xo+@MlDGyIS~_3;C7NAn{eJ|R@nym{oFmf5LEwLeED#g9uP|Lv!v6oFzQ;)aC*r^6 zlWj-yoLPF)3k7A>`GSXLT(%uMJkt{v)gtoIFO+4rV`E3WYp>b!D5%o(?Bs}2Et6%%~)$|dWv<883?-u@Jhs~A2g`6FUt59K#9l|M|DqotU z-Y@Zu6gwi*K~)cpOzI&#q-gg6DdU_|Zx6z1a^0mSo_yoYD|kUyaCG3qbHV+vUm|b` zzK*Q_WstJ8;~96bZxW;@+}UEcU0QV`-4t1+c}ch7#+y>ZKM=uw+EUUZlhe=*Ic}-z zDbI;ucD1iQ*g~5ose1aNO%@}N>f3~VRUgRr`C5!33JXbSdFGDDoUQ)M|kzEQN=l)MhGQYjI`niz~u zQ|lQlHHxQZmxnB$qOn5`PSJ?i>jnw`&f!VBd;5SrT4_DgC>4BfQdaY8blPxuEU)sP z(whS^af-&NsOZb`E!LYngX_!7^&fm56SM}56sfoOrT~K*S`st>qi6b+_9tVk~P)h{miisZiY+fZxTWWNPM>gU|-+f%j+LC&|RQW{<(q(FuCIMO-fT67%a73|G`a5jHSp!%M3|=uAzk& z_N#n^5>?1UIrL%=OM%C_c+ggv!DEhyAw&W-ZFrUgtco&9p!T}{ZH+bUS4taBmVL8} zMF^!0`#YABT9N0^*ksxDdS+Rq4>}X%Up+>tjMLy4MPO5W>V{i@JzB0e(Mzh=^1}m{;u~L@JW!1vYtngOyrZ_gi*=r z^C;}m($vl&A-8A}fQ|)q)5%i6y^W5kQoUi*yI+DW<8H2NA^lRR*PB6@B&}RGbKBdJ zn0`Jh?W>dL|3mUAo0d@drbnzh_tykO>kdr= z7-xcbaDQXw7KUh^N`A0whqVg{V{uTFde5`j-y8%lcbNYqiqZ`sNT9q|&YfcZNRGz;Y z>lG(#&E{o~vnUzt%OiaDXVy&?)irWX4}NxYVyH@5LIu~~*0ONcKWoU=Wc)kUi{+oz zV+V9l{x5}5(-OAVsqTHWV~bXZk04Cqg1FzIQbIcKP-!91YcyPTt2D;H`TVB%>1~UYM$Re2uEO)daql9RTkgtSjSgZ;AD(OVziKaM8JQ&R6i!VvT z)6}{KON*ko*!rKXdz3$grww;Q!fw&T0dmaM0LBgHogWpp)xbXGFZ&h|cNrMnV6bN= zTB4~F;1eJ|ey@O5)YVT(%rnWJaeVv|pU#A0rMgleLXx@nlI9ljzD zF4Oe8BjZ%J&+Kzqc*9h}|PKUiwDuFLOHk%f;P z$prpuM@{i#8GE$C#ev2BAA^vk8!)!4+@KM&lTrRf9GmKhMPQ}(du*NnZaQHY?I5-& zpNA0`);YiuoEw6;L8JY11s=mzG7BZ*>!7XWI=GAIKiH3#XnOx&w}St_-U)^znMy|? z;ZWo`fV{j!xB>ycK3>Rl-pmZ#A#a+I9x==qAstV}TsoE+=MvtwUJPs$59}I3+u0QRWiiC-wB;rif$q1%0;TKCc6sBSm~eM6 zmi#u;r?a8u4Pb9S0CU+}UYK)T=9Re>J!@RNZ+oyUZkT>wsj3dhTU=N=gE#X+25J@% zjB9(I(JwZRHEmAR1L-z5?>sLNCvM>D_e%3AKr8c@0hRrrHJ&p3mrF)bNraN=>S%ZH zK2ku+0|IW5h=YNv1s^GTW`)a6wpy8Hd5_$6Z0KFZBTX6VoT{R5L`*QbvV-ms*mC>U=(e8xF+&{6fBBg>J2Gc8O^L^_5;IEYAz1 z-gQ9Je(fx_eRox05(Xbyp4+;9a?l!uZNPg{%7>4~%VBBB%R?c-tG1I-qG@E?db9hN zhe3I{ehVfUTrhr&4$r8M66Ma9_%bp;hr&~yGtJzMG7N#Oe3k{86cg9z2`97QHCUnh zr`S$!W5DI+5C&W3T@Il+VC{Evg**+`2y+V43>g}pK_XA#8^@E)Fp{4^GAr+fu-}?I zUB7+7X=glR@C&xF;O?f@;@kUSJVil#Y1Uxj9FpFGtT#M{x!*a*rv_ceh1;Y}3H}0D zZwdkESzNZoV@H|D#`fD938{88ZbDf@FZVuc;P*^eu*9C!5Pohmx~yo&8sb9al^D&_ zA5~>24Knw>lOECjdLrGd^HYV0y7}uisjL37V_eW}04w{spp%kQ`)#GGZ*RfpBwqRg znOmPro5wcPX3oJ({GV}roA*9ZNb$&U#|XD`lme zQsj!WqnCWS?FUV4&pfVodP&~oHhp}p&hSn?DS!87G6ufWnX(KQ9Ws1aCNVxaX!7v* z)NyG)xb5k$6A2;}EIBD{2n8BC4G=}NKly~@hoS%C?9ym8bz91g9mh}fS~e|}@tzoK ztI|hHrD;o-Boii0KW~G{ndl2@Oz=fWNv&s^mzo6EM}3X(ZvvUEi&?(R;{S%koqeg~ zqDj~I_AG4V?(>a=s)k6B|GC$7B`8t9YgY}fg(mcs>y4Qhzrz?0I6><(O@Jj$K7X$y z7LdO2VC5F>y&m&Y;*0{j+tQE_gofkE83`bVOhXptXtn~QO3WGa_1Y$X;uxF>sQTq-s1G*>ejZXLQcma(gN9tfK&ZQ!Jm9_iv2};?@8|7dQ*3EBN1&sikV87r(HQ|XS88Rv zfrBfONAXJr8UAkOJUCOSjv^|NRAcWyq{MgJLm%`g5+8iG<;!c)Ft4G@@crBEgP6QK z50&I6+GH}kHT&k!;5KCK0>Q9I+v%D6c2yl44}CLl&kvJAgR$zMJ+s!@4JJFU)?1j1 z=iJ@V_;0Jz*R8>K=f}4X_k$aOAS(0ZHcTYk-EUUP`TTBei5|FlIcM?q)P1&dw}8Nq zqVZa3>dh$mbivs&Ud-ws-9dp&d(aYH%>L;9%j?-i>2?{sLJ1;&a0i5|8W~!;!Q!?> z7-vfUPEp$)U}0K3JI4D2dg@y*gJ%MJ1bamhzxUY!iI-GofEH45LB z?A_7c{c`@phdJczv>tlqxQXww~n##s!tekE(gC=8S59EeBsie4qW)iQxvp^DWEnf$2B{!}3RoFwIY6&j;%Xzdfwg zEp~g4RQjfuRnW~=z1_RlEvPuAKQ>Zj?)h94M^X6@*~M=GC-f2Tv!I@pmi`jA zuZ{OeTCBh7^)gLjcQsRTlswdSpI3>seU2k8DU3H`P05&)&n$a9RF}j~=aWq8rc0#w z!7WKVjB35?keAzy(axJB6+I&BRem}_(pE%mc|M^E`3G)~G)|J7055iiC`M*&x!>|d zn(y9_9e(eAl!Th547{$DBa*dKC`m`<=JbD^O7m97UQlmml4NM8M9w&qVJJ}VjZxc% z&|2YO+Ah{__9AQZA}MyA*9tKqdCL-31T8RxA~f2K&^$)&gsi>yd) zKMO%*JV^3>N`E+zy@C170ebKDSO0{Y^`Z^s*3J_igjRE_azA8`n(n01azD(o=Avet z0s@t`78+#+EB5wI;bzGH>0Hn&2cz`8T@(~Hqx%__9b}LkY;;_}aU4_3WAPk3u_XL! zDEBUo##z#yNZk83=*;!pFL11&I0iokXJzMwm3FYk%C#&$4u15+S61o|l`2>+i0QM^ zM;sm4-ObhC9Ln6)+)WYyr{%zfJ$SaqKw-$u^)hn58MthNUf;;vT$R%U28 z{L9@UZ?m;ji2uzZ0>(SOS2eIq3wYiY-jK`OT!0BB?>52hM$O&ofXwaULCDp@GV-ix z4O}aI$kiy&dUtv-dAFqn9G}bFZUfhQ%aZ-KYbmz~dH@*%y}iD>tppj>f?npJCpu$-McL1-peK$Dv#U zH!;ly)fU{OgCSy^dRDp3g~Qh~(;jbZcc|plC#T``KY?V150nN#uJ^*ueEin7x^pl1b1Ze15-XRst>1NXaH40?rq z8K%{GlbOnh8a#7|cL^MpC^|CB9v;ateDJ@&(C(=v;z&)!_G`?a;5y`^PhR%sXkpnr zQRG6-W$3kF!`?0|qRtb1V!5Y~eteQ>ROlf`G#QIyQr0Wvt~3tH{-OPe(_4lz?4M== z@Cv4?Zy}D8R04zfyywt-Ovn2mZ?}7N$vi3g+`wcEp9$)gRh5>^dr{KV(7| z3eR4yE^jBbH93^4W}J9^*vL?pGbR)72Pka}pK1{8YZXwFx{nG%E*_xs5?H)+&e`b_ zUVLlz?n{Z!KI92L`YWKo8j>{AkzRD)v#tHwvaY;CgsZc@=avIBlIZ89M7=@>gB1v! zUg7b86-TDG4G&%Qqyp;!ElnOz=VRP&5kB`S@10o{GnQv7g@_gG-=Q`W%jHLzBw{oLGNi%>v4L3f!>^uf!W%H9& zWvvF$Od{4dX>D*~@!PkyV+&c8*TzKCCBjuKuc*gx<7Y40_0_8aS>+bA8_q<(QbD6X z3<)cwsRGVR__JhH(LU&_K1X?{o;NvjO&Z|lMwJh~gBlM}4c*&)cV;(A_t@g2zD@?r zl7Oht@eNZMfSrc52M%zc)$bLW6#p3OXy^T$Xgah8p3CPN;T)b_R`dKDW_VDp^%pvD z#KAU1^l2LS{d=1vL@!c!&UGM=j(2Ps_1!JHM)HI;6=r-kTe7^1GT~&encOtik;9K| z!+H&($zHwR>yC;qGJ=awH}71MhY7Hj zVe4T0F)Gbh8P4h1YzkIXde2M+C3B};(`(s2EwjiiSl+P3C27s-tYr(xEy#M7NCD2K z2Q+GumvK9fo;|v0^p~(Ssipd3z|VG?3&CBfn*;(2);Rb-)+-UtM3&=OeM(1P=n@6B z)3D6K!aureg!)YVVaPYk1@wv)oue>@YXANL&C<031LEnD<44bCn`k8BYY99OABA_8 z`8`A*$P{W2Tq9w$T-d$LCy8^j1AI?TyW9`**IH*8+8+McH9D4ZJ~g|~rraOCh^_jx2`z=gr%3qjv&+K$~B!whUu~#9W zcDV+>f6(Dh8$d+M&W*q91J{W3QfWB}(5*dF4(p|hYYS!&B`;^NteO@p8!DaYjS5Qr z&fhYKN|z9!!%&>{&|wdPi?A-gEIwV#N`M6rPSc!LJW+*#&BF1u{mO5J2{BJa#~rT& z=B->FTjjRphPZ3gF@xB*_ffw;nW3yzs}I5$u^lbkbG@%)_IY%E=E+f z!|Al(TDXJU29knN_RtsVm56?L;eN<>?%3CvjdUJ=nBjhloqKE)^n5~--G=)0^z_)? zry&yw*U6?dPe5G~$l58mF!!KtavB(@`Poi2RRpjX!enJ`V=cRD3jk)h7CX=R`B60aPm=55ms|X@TXV@E3L`w zM^?EnzBPcJp*~|3|NMyK!cyGc`Q`l)_aZC@hGtU6g`#K?yxvtzo8(Oe zDshFSXO_t9z%d{+UT_>aRJ*CB!Z8$01Et-<>~+^=OnfBw7!pK=ZpUYct3~;&89c4JZ(b@BFY=xR@!70R5##ffngYi}KU1E4l!{-E1;rcqd?YFK}jq4dGz_ zOx@GW2yWym=$KJHNFZ0lXU`Etf=X_M5=8Dp&DzT#ywe#QCszU3Dnxd2^r z;-)=+UZ1=JfTLS_*70gjoAB(^r~epa+LLGCytBJuIur0}@9|F;&O?k4WQKR<(Oxe$1YL`U9Xri8t)6?5F+HqI%m zZvI^7HgfCX^ZQs1Wv!so%$q56E;qjnA_3}_U&!~ueMtC6kB{#RUv^<$Z;j^;z+2c$ z4wB;Jkmu>uVLte)v_C?ZlaD(vji%5Pk;F=B#&yPhrAqsX&R1 zF_bqoTFO;-I4kf@`GGm@zT%Jbx9CmGv4s`MkM2{+A=`azq-H@pFYx}_98w94ci6*9 zDM3$ATIG6a!5imLu8CYjA`hJ;z#ZoyVXw=wuTTD`;$Q z+B4wJiZ5UX8+B|Qbr67S5LEd!1DK#NTEMb#|aV|-8ondAMHS?kAa&0HDqZaA!&8;U{1fhQg3Yy7W z6SYw~7K}R&vcpnV0`D%-#)1+=(Db+tI_!7{&zS|?`T`$Mq9q5liALbun>q7ZZbT`W zT}yg`ld4bs>sm83ptFp68-wA%DunQmD9B~~wR{%}Gtnn1Bi#7a^j}KUb#F;Ol?x{N z<0g&I57q^a&bR0t`S+z;H;-OT0A)9pmd=SngE;rp`E|Ji4N(kFyvE#FWicSKyEwA( z%!_C|C`NCTwNZXwVxRjzWH{I)A_-L@B-!g=N$7`3?de`3Bz-vT^H5}U0=~XmGlf3Z zuuRrPA)W2tSQaV7tn)FEDSWgpk{X6g2$HetCg8>oR&3Yb#a)a;a3vo z2R}wCP&j`)dV25kqnconuLbbaH>g{S?a_KD%7?j0481?G?my?_>%-EijSqW#c3{l@ zTMW&RYq`&0-RyqZhihM9x+DewO;C_{cN7RvQ8taXehuNEsbJ}{U@>jk=OrK%b`7pmp>aE=d90WJpo z=0d%|GQKA|ly;_rn%#~2^}!Ew4HQGCWqXbkcsl%|mjpCDUss(U*tlrARhN-b_lz1h zYi{|A3TBX_GWXZbMhH-)H=79AFwo+AoqlfnC&zncHG-7bd1(mlAtOu6sXljo)pDnzTF?qgvN$YpEIh0-u`J^W@f_|LLmz)xX#Nb`5q>4fpj5u6n|Fz; z0n*yR(%Rz)m4e1_1-mEQ3lOQXA^A#F)j-tSk~?LFu|k9YiTEo?h#mIMV+`$kFh-O! zG}4T@74x6J=PdK6EXNHC7K59#M2wu-T56UA;N%XHFMOKNHK=s}=#Rr-;)NHFv)qVH ziYj9^Z&0fJpzghnuR&-~RWjGZm5u*ws25r_B*uY~XQay_AX{1g-u&R4r~uyf8_ZOu zexKURUsvBU*s7`@2P0OQ5uctuQ$G%wdg=d-Xqh3iSLmjV*!QCUEhUS462M-(v@o;+ z*gsQgs6ixIfmv5@f-8^On)IQo&M%hE2OQX!0Wk;=mF+KIQ#+zpP%yrF%TPTB#j~LY zv$*pfKE+F8!f7r9w-k73n`|^~1DY8U%MJht}>{Rw5pUC^qX^!eVu z`}e!==k>gve`Ykzyytpf%XuB=aURDt2>h&6XG8J+s3nJzoavBpK`6DWNlJIKZ$|Rh z6#s2JLzyW+%{g0{^L(N$OE+vKR$K;$`ekzfLz%7=LhqDUCJMb!P6|qoaA}zr>j(jQ zsHO-ozT5?t6|wBLAQxe`Qk3g4wa};$*DpR@; z!=E;n*b@^~-QH*(3A_nhQf6SwDgY<-8Frk0-458P!;M0fPm>@;+UM0!fYKs|{1{Ec z<>bCa=hKdwevt$a&$N=H$+EHj^fsL-5NMmJcM^}b&e&m#uaUmHPJm6&%kAe&J1ukX z9LrEP#C~)o*pg*KV;nEh((n*KTgN}fLS1|(&{=ktuZt&uI{?T$v@~Z0048Ha0|t@W zwNtK03BOjT&C=i1lPOH%--hupAjv4+<(GEAbkse=`J%nL4|qC^QpGhn^OU0EJpy8? zk}qqj4&m>AP8OPVOJql9NVg5WLVDE1^KH6KTey>DU!Rkc?Ot4Txgvt`Ey-$*vuaVS@ak&>9WdC8WNp7%RvhVv=0G(Fs1n(oH8BK7nN)Pd#U(bwBXSj$M6i zZ^LNG!mdV$=Mkcc>BQ3Px}V3{RAiI>3r@0x*x)-LI!$h4>fhSx$NkfvDv(pNyYbBrUcXWb({Ooz&#Ml3@RH6A`_E{)fct3D zZ8>8|Am(1*r?Ll#N;~aU$}@4+Oox=pVLcjsX(x)NvR}<%1$?ykY!>@kx1gKjV`@k_ z3t`chNoi-2W8Y$RE7@0Tx1m5TA}x+l?=}HFew<;eNOE^MNR4VC1iEkL*{C6DX&s$D zSLOWxxlD%D3-Y8Y@K%aiTV?hb#fJN*xDxgJ*XB4O8TiE;XnQK#hf=z`^W*^Sw3EKd zg8cyyW~n{!V>2JV^^@+T_*hnHHY}y()qL+i4W}`%E(<@dUuSu@wEvHff<8Jt@VCwL zBR!HN++B1nyuIRTM};OgpMd%Y(e zxmP=kp9K3T9Ww%Q@O10F_diWo)CgP!qsppLrE{0h;>9(w-$x|qwo!8k9}L^V06sp~ zepWpzB5iYpu~0YCMf1(yjOE|#fwNOlqfr-UhikJT?J8<&g zv3fx8dya(*FytqLHAlxUQn%MU<{wD&`SZP6jbZ7=XsinY@v3$YA2nL(#ZUk#aW^7d zU*+>tLLMq9+jsbu_QeoB&J);NYtuheo3TjAnpF&cVa>}m<){2$$G2KOsmHR?48PZ7 z2s^2n^~|^~3unLExg7R(jX35nQqtWK7b^6a)kcT*&3H*W-7!Drqf?Ein-axa zl7PvL_u$A1jc1Z#hrV*`q0@AvuL+7hXiB6GO|rAx7#)^Jh!hSY@jlPDteg;c!uu~4 zdO_pzX3K-&UvFMEf980RMJ?bQ+`;Z2JzE*pR@u$5JB?9eWn74@LAHZF@hNyV*zEO+ zmm#I|J1_*&U^yqkMYHw87T^MxXyBrlO`yt?LsxznNCteg1$Ce#t(%=LghPHG%Hw=? z(e%>|(VveC@-y^I0qnca3dQQn zuvH3lbkj$ltEz+my7jNKI^cyuo$R3mU@eBbZ_cfS*1 zo%cd)p18VB{~u15Uzg_}EBw}2IL&T{0EuT`^Se&UXY7NDtge;!^^bKQcgDt*Wp%^n z4*CgVa@ye@c>mXu9x|b-)%#fGQ#bhzPbaxvvD%P3V!O8WIRltsIb$Zux3VLoLYUj> zZiDlbQ$t7yrvPm%(^qDV@VV4;qsQg6FIW*b`P|MF$CNUq|DuKVzL&w(NZn1Z;bfVh zO?~Fm^DdgBy9}Dw_L@I0V~8a?lqyfr4e{jKEkD%|)OJufDulG#LTxBCDXpAgr(cr4 z+kgH2Gq=5(-K;_L8C<~BZ1wCEMjcP;%}>v(a~e<4uB)@) zWf3{*`49oNx-j@x#wB3khOo(_u(?D2Zg2Y`k-o)|KFNu~|Lr!R&NN^>^sWXo-l}|$ zrS)jnmBd$H#_}TEOjj9unqlRY8#dM0uw?j+VXwrn*pJp*jheZq*;g)vHnu=q-Cb^&-~rAO<-@=D4sk zZ?mH8qBA{~wnJ{3xs{pXER?<{&2I2#51)E{Q)jgS(-`I7n~GDiaSf89t@_Y9TGOD9 zQJH9N~23EoS`5AUmR@uEI}4;I+TxCY86@TB4f|#%^2B{Osi%`G_s*CspJYR(!XM z_oH&HqXLsWECT#_Ed5)InDG_7V}ztsA>fCJCV8d@uKu4)m z*26ud&HYL9Um$vh!?lFJSj^|Qx||L3K(Cbm?TEJbOa31epQto?@z1?OCleiR6EoCs z7gc5?H9jbLcYn*cztC3^3qiuJ($XNO6_L$oAT8-=69y6~rg=+Ju08`w*6$`_Gyy31CIR@H12$^M`}vOt9zb6 z#BrV2tzlqzrZCL*)_(fgyh};{6OYj9TdNcMsrT+Fg+7dQGyU^mPE7YRFRWu^b#Z%K z*!b;kS&^gt@rYh!_E%}w9K$^V)V4;Sdt4o&Av#%{`c5ITxIn1yU%l4g)8csjle=z; z=VJOpx(?By6SNoi0!#*-b5+a&uAi!i+j3}#j<{p!9k=I=KIuN{`lp*?`W$O-cq4Vv z`uvO$vD=pC*|*)N2ZX-O$bIPyT4Xw@8z~Cs0OG6m^y=sO7e$u6Quf`uR?cLrjDSN$Gm>4ngu8H@NoeDA%izi746;M|FF8clY z*DVE>B<$(OgB&bg^%bW1(Qbl^VOAG`#SOT%U#`fm%_!?=7?osTk7#&Tuw*IvwAhB- zKN2nn)qUf4C|Rdf28NB?lmjl_4MNhK{+3%WpN6?i6~oSvlc;XC`K$TMzTekpSo4-~ z7foI+F=Ln3fA^c@)#DQCF4tz?igyQ?=!bY3lLCpcl5d-TdW72!@v;FE`t59r6%(2z ziD2ZfM+(o1$X~ji!vvPKqd0AxnDd5P>(!+4)RO7yuYNt(TIB+&_#uZY_A8cfy#~4l zOSPx!q&l`&iK~2B162NZJD*mNo`cG%+}O3kPjtlcyIa}-=cwAb0Q4yUi_qVRnkvlU zjx=(*3fj%`8sb{Y1M%`J=;@^&jkbt=bZS;h=n3W@agf|TytukWJDmhJsE!c+v9!|h zGTXPGu){Ie@O{%}25G+68rT1zsG4fp?kH=u9c^6B#)$a@$VZ`xhj>gX`kKAkPq%BM zqBiNq)~S{ytmzH70`@K^kQXa7rU+FwV@49!xp$?@UGMnh^6t2zoCQS(w~+O!07n( zQm0RE`GDKPjXE;YW9WfK`wy4Kyae>s@hr+FmJ4ks-7ZRDOg!ZAj3|$aVXIwLrH#7D zaPQ}+0qs;TU^L1;FXb^%4`|1JOZ(Z;mH(OdsgUhG1SN5d%*sBYxc|PClvZA*pE5_H zK(wDJ{DYRSG=Eds$-~XZTF#UjzR?(X!t|H4lk~OMz`{eOV>rzo$i`ogdjBW!iI}daF`V*P(!ju+YKo9U|-%`kPXsP%u+nU(w%|lB# zNY{(`r)RZ8{zRuTvS@`8M0F( zjmhTyu3Lz!k5iGz$BLsxgwE#0g3_DelvM5wg&$V}Y4&KmB!5f;umvVaLQ`g4KB6|Giu7mB4R10tKeE zAG|Q+b|tva-3bQC)CPSaeC0#+3E5kwBAGFa23|Z9&p5Jw*yW=NOdCJ4v5{{zcOBFl z`iJfFR%IY|c2VyGiKizfw^weZ4FGLU^c($!C_M_rNMMP=zXG7G=Wn0aK(XzvbiI?1 zIHz8)@ovoCY$%_xln^kS)=j-xN3r(HCgI+@$_L3f27;Sf!@sCO?^=IG*0Hw4pZAk89~}&OJNd@1Txs( zGW!oF_^(Ky@oEVzfqctRk521H8~vGOx4utjG?!ecnkPP*Hp>kA3NT*Q z#^L9}Dv^NfGRs`?r05hX{;aCBef;m2TTe zND#}OIsy25Rn#W*cGmEBvwP3`kLD`P>_|VAyxAgy}EkR8OtYr=&LbC^*-gL()Z@Fe8)&3<3 z?!JnJ(mP!)CCChB`zuQS(w4=?{zF^h2<(MB#O9}^9=OWm`(mg|Lo|MR8MM1Q+X?B? zl-$NR!h@ZX4^KA=w-b zrT*=UT3_*3>AXE-Dek#CCk+qxr(Q)p%XwIDF*smu?^yq`Rqh#7M_q0$7+%tq8U3RJ z`ZQIEZT^^_Hcq=hbjuHPZRGaJN1TP4vQLI$F{J7st{lRCX(^9@a_yIM7g#ss4w0Ju zfb(6?;LFW~#xs=KWJ(FtGL(f38&>yRy{uzZQi^P^lqWRGP;wz7HzmH_J^6FYmRZfx zR^Rf`*yE-94Oz5q*sVG!&5m+Tti*>08O+qGJS{D83p{&)m9Kxlba=aF`uIVrFqGO2 z3$MR?mow1~sLi|R8@^vyHB9_cn~qiS)>@-bq02H4@c7uxXGMRRyym;@o5DiJZBHkv z=?3bSbo&^|9GYV~5@lGrRNVLYE5(4Wwa=J}l2r+4XUK>>+L=13XrV?O>_*2mz8g!?Gf!(7DkJ zjq_`ijC8x@RRn>_`*xDry`q>~g0oRp0osW1BFBBo$La<_z-+;QH zBUWH>p`s)qyhGLvJv9_keKg!r7R13l4;B|XJeHPl4M9v7V?a~8nN{{BP|bh+x-jU- z(vWdnUBheu|BWt~45E-RUeN^EO{Zfzar3+`4a8auF)ucC{5}i^q z?5E-Ho10HIA0cy76eoU#Z9elmy&Y`MscPqtw7wrbdU3pC3v`41i$oFB3vK4OzD=Vr z2uaGwxIU*i=^ z4n}9nDOmqdMM6PfR!j&gq9yq7_Ny1B$V~xhHH>pct!xK~<=-*In3c9(aWQf$K%DHSdy{BX5q4i}jzo-bB+( z9>JqwP63&@J6Bf>l$Qe3x^|uG**@gAM zIh}1_3YGD4HlOgJ)pLn4Z}~NWhh)YwI2beI>-cuAun^128Lv4!c|040c^}EqMqa0~ zS&w|*`!sVzwkGjmYKu@daEyYYwA)2krvh*K#(SDbZ~;U6^T^%FnqYU6BMFe+rRt+D zGaUKE2Lvjh|A>p(Ru-UMRJ6JXV{U~h1@-R4SM*)py7znXYuXRBICAcMIQ!$pzH-ZH%c;~l4N&0bOo)2lv47m4 zafcbdReNw&agD)0EHS6?lG(36#dmtSptih}K_CbRg^dH7{m5`U{VYN|>chQ5U9Vv^ zL;N{zQu>2yjrzDPA1FHEb2ECJ8sgeISUuMMHDAeQny1z66F(_!ue2luG>X9W!aZtp z&-=l}7Q@g=u(70ZNe;j_LT_j@$MQtDX((tvV-kW@XS?ZJAm!8UaUX{pF3N+iu-A*~ z^Q7PyNI^XHc?Y0)+&^LX;JR?63rWZc6}p3~obamE%vp?momfj!vKr9XiX@1(74Y61 zN?IfpltYr?zM&x0*Z^{Q>7{k|(m#4Oozj zKn8V)k`^RHwPo!yNc&X=HhFx0-p9)Pp1Da+Z_dFKFPdY6;#$xl$1<7F89q&M^ZTq1|V&gARCx{`^ddVq&MWNo{X9#zFH3JI$S?PU6z0ShF zb_NzEl0xfWnDmnfKj|F`gAjNE)a^-&RVu~S*P^wb?w0El3WNR%=A+3gpqSjUc$g$! zHzOMc7$;--NED>->sCihH392E`S_PKsa(qgqtuV+613q~tEMt0(Dr&8qsQC=^Xr`w zZ>qypa%KQ4O^a!OAaYw)GFmg09qP41CIm%umO8$Q$^ON519=4Aan57uPBNCboz^b05uqVJkAa^_ZfL*_lqoF)ER1W?g2Ub75-<~qC&{$x5^oX-RrFV z(MOv0uajna^@%PHnEXsVzAY)f@wp(>hhZPW5*}IIgE=}IHj_tcLnq$PCLZcZj!x(P z!$7*V98}D6tw|LNegx(4sL!3K@6ek6h2ltiPq*9+s3(6&aaB+S zhsMM=ZPMuI(|t)4N5D{lKL*8Qub7EODz___%%71g1|Bu-ByvnK7v?SjE1;Z{{wl>| zvERGFGmO`DI`VLZ%*MJw2}KA=i)U|}22r>i1}N50t6DAnXVt?eC*l{w)O`lFBrU5! zhdS~Rbf~)h#E)4dOGl1s`azfbsFPFJRH`zv8^QuP2et8fqo73{z)B6T}y-(!;DGb5&yPC0>C4K=KlwF z9DNBT!VR(klGZ2j&2MEM9S9F;I?fSW;n?hwin&CHM1cD!`2}nc8vXaR+FE)YX z5_BP;=d3RWJ?BW)6_|r0&YH9RpQK#jTc)x9CVW=sL1`4}d9`d{VSDCm4UN;GvlYTm zZPs*WYvr0`7f7(MUpZjb7d^Q7X8iZ~BmSIWv)V_9MuUanJA0Z4P1{ z%(j9d9u=6K4use@#8dpGdaQUW9|H51I%`~C_b+*J+bf!0DILaeBOI_&uSknS{kz^U zUXt!V5N(FGit;>SWQYK~M7{ArXht3hdm)T*ryn=5C(IcV*>JsDO$!r+k}Iqp(^ z4t^=*P`X-ZDfRqofOLhvkXY}hHNNh54Fhzr>yfXRu|fT1`hoFs$vu*w7sAz6({1O` zPt#`u$BtaC8}X26BQBTzbg7#ajd0tuc@V%EefH2L0a>?d22D_A#}rx*&$R~3Bff;O z*^k8;P_GQWhl0MH?V#tfz zs5AVKVvQK~a93JqbaN%gNDggr8+5Nh3=O0S%hcc@=*=E74EOjfolo1XrZTO_&inbF zQ`rlp!c*13W?^U8lWDugaoGJ9vOulXykM(>w#G2-uSo@Gum!u^(*zJ409y&X@yaib_WfZUbb#Ym4r zZ@KCyAH|1~->~;BZ~jRQi8;$HuDS1bJBC~TL9wN?$S78C7l45&lC`2p^SBC87N6!s za#wj)JU?earE^bZzII({FwCI z&~Su*{P0`an4fYyMiC3l$Mayv5oGO?*Em^x8hLye6fJJrskdyweKkicoBA*51alTd zDt>mrfsQ@MU+qNw=>uNTxec4W1`3ibb-pS+19*ZHrctvL5ZlDHNGu!O3jqLeg&!fQ z9;Sxz*hYbebVY79SwJ=i|BvqRs`KIL+RTru;+qXfcA!qXyhs3hHv|W503DwtzXroB zCzU{}iJeLoh7S|8A+(x!!!4DHV#+#b? z97Gv+&OQ(c61LZ~F%tu@D3=BRs4y$Ey2Od(A=5OW1|p2^#pzK%hV7rY0^!#89&)c$ zLW3dM{2R_!$XfIMf>0>r4>oPlYN|$X?jmhI*80es{q6O zk$ZERZggBT!>mb7QSpmCb$U<;eTB5k(g ze68$nUf)T!)2+H*c;mm68Q3?cwcjyeJ#@Kh)IefTWo3RxglE%}iQ!p;U&YI{%es)bG}2duaF4R873>c(WL$vC}@7;|$u2iERIE!5IF$X8&}ZH+|4i z#czXtzH*BY;8v&Hs|O zbc{QS;4F6QUmg^;D_&v2pM16s;K0Ql8HS9k3@Okj>Kw(x&> za#zLEaaA;e?|MB`OGM>kM1UkPq4Wqy_4Ysa8Oso=dOsCkGjkK9EnpN?W&@)r>}woK zAZ>Ac?tUa&v(<>9<|PYWalEHKj=R;lz|{UyKi&F8P)>Zv@(ZN&8tqZN%S;n$hkWtx z2!0z7+qUO6vullRzc`$Fp8QYF)~ZF#azvI8w9|M(rpq@$>=Gp(GRAUa;?6`WUVb-4 zfV5jL2C0$OA$H66E39VKZn?Vh#<&qbO&v|n3d#5{Ei}IcEOL|NHbpAR=M*A@s*dQS zxVpxs6vzgYhr_MUDF*vpwC{#9m0VsD9E~Ojea-mLtwbB#l-az?E7m9;(Ah~}UxZU> z^;kZo-Ah777i6o5Hjgfz2i2Qw75qbDP7JK&-+F#SQ)d_6fBj9H57aHt01h;N)xBWN zBeZyh!w064DL~vsr&?-+^T%cdoqq9+YO6XSy&>u?VLPzxP2l&yxSq#JrY$m;*OiY7 zfcVP$9=zTMP#Ysh&SU=k)P`OaHT<;rs_(jrB5-B_0ka_}`5nv8o3%82=8eutqZT<{ zIoxTJ|SjNXv8#;MeevI^c%xe|N!1a}tU=}c0j z+sNvN-Yc;ZqwV3VXxUIt6%<_HJ$R79=SS;hUk_AWHD6U3DUiLYzzFP_TVRC+g%`5} zp-^!=(cmC`f-*z7ZJ8x}p3EiD;9ExZEzNZXV0pe8uC1%!X22gEEW}}hRF2HRV4j*PSaKzm3W*v>!Z1^ zp~rvmwaWM5$-JM)Y0U6Hpuw3|p6V)5x8_2Dp3_E}TaN*rXj| z2*@x@4?VKr{cYK1xRxg|(|Y3cLN*i=iTnT9gN>o=^ui{ZX2S|)RzbXkpw^&ljbTBf zib6$MPyw+|I#KnH`+86pnbEtOU(UvLpz?-3Z+_>v_Rnvd@*$=Yw5OJS*qAp|g`XZF zmCg-ss5dvUeT%eXqgXNFU3HY0I3NC_fUGG$9sE?$D@m*8p;Y_yiMIjDDEafIyRaBX zVx|&Hk;7!vQo#6fAfooJG&)sAooZ|TB(aFn{j1`_wu;vQM!ikuUD}n6-{H071MRCJ4;zM{2z)14wvU>^)p5{!zN0mN zu!AD=2I}{1gIR9(<0(cJhwSK2y}U`S%W`6>5V}K(&Z&R{Npui$>d_!GAZvJk>xDgL zy~efXjto?NMW=R;j_;F7<5TNauf`JaQ2Eu>8Ya0xF3>^UJX7_1K5cpr8{6haU8ibu0j z4|zvlp#JfVEi;8ImS1!}Vxurm@Itu>LSF5#uS!qnW(b}gi`s^OtK%AjBkVRqOw>8| zCC;smal+8&d4fj|?!yiT_n}VA4ApoLLS6v=on2Lv$13a?@F<;c z&&Wm1ej}VCEX#b@(cZ0k_*h~;;3xRyidq&nO#5DJP~TfX#EA@OsY7kg!WLTkPGQ8f z)e@fQQ?esii8`4QFt2^OM)pn|??a}${8HHFu{g#w#DVC@_`;uW>X}3sitW!pMU4Ab z)vgEf90pu|?c1+{y9$%qzDmEOwm6Qd?5mpUZI{j$tzeAj}KGw=`*R zLEjWak`J9mmnVs0Bu>Z~qKq-VgeYk|NiTp%AC0dez$jy{qMOh}7S=Rf&=2@VdehrV zt5faFtK`nD7NAP`C}wrs%ca?y(9KJ48OU^5UJ@)oXwtki4Ei0~j_QxKAaYtdlfGYR;6T>ut?*{!Au}xFsLY9p3h%VK}6YP{m7B!dMF?1`~`) z`VlO7UZ;xfhX(oeK!#C##ZwsUKph)UBnbw>%0oMXJ4YHEPu0qy;CND!E-FFuYhAY$ zQ#XABp1&N9*9zPk|n3fNKhX6S@Dm`82OS;DJ1n=x` zA|_u;#z|`7WXVfPh^-e$vDJtAhjo`IO#0GVH^$fiJ~Zyk^>RzMxa;MiAxkv%=9!u( zqpclRSy;Hfqdt8*43m+zV0toxaPQ}So}22c-#o}H z3Y$exyIH$rfBSaU8p(T#(ps-M%66}Mzbluzq^6~o!j2R|D?#|Q(@WZX*iji zK1~jzk9T+^qDvQV@)m-JirPwf<>Ag+snEmDl;sX7G27?3R)bH5&Xhe+#=#6o9AKsD z68}GprwBMt|C{mjm_7B4ulK@BK9G#362^g_EKzH>Z9a-(1kIfUX}v1D=ZjIEjE_v| z?C90X!y)43VV0RuyCG4-?xna}VL_sIalZfhP9OdM^PM7enE%^%>eV$ppZFi&ss4ZW zojTkwj=cagkXrm=CJLr>lAs~D#Mvz1MV%+`_dC+-L*5Y=U~Vx-l26hO4%2E{r5u!> z6yq?aRj2^>^e_TxC`JV%HkUv z_^LMzEnRkgg`-xUVdw*+Mp;%;1ppQ<1Vn-CEjZTQ@-gXweV_Xkd2ui9iI|9Eq^X}^pnd8XH+|K=C2kj`H(`WiVVBfd*T1lD?H9m4WzBQB&ai=5o&0<_FiJ+Z~G_fNqkW^k*K1?G?n6!X3({RL5W`b)o}f&)llCK{_*Pm7>r!$TWYHbx;-=P-~zsDv0_Tk2MxK14w=#6gxP9V6dSV{AT4;X!`V~9 z^12W~(qg_=qrA_C>%U1FcB_nuS|hjdglqxE;=02==T8;^N?&HeLK2 zv5`HLz>*07-Hg;_>RLS`_3k^Vne}TA*w+A^qe(5#F(>tMbxR4diAg<#iL#nPs~7OA z!F>?8jUgkTr)Hz32h>g;(N*+cmsUa6S+UoDpAZs{h8l-QC>WxF) z6(ZwJFgBn(iToDp`50OHSG#K={BQF?x_dA7pB`@yE~idEpW7tqZr%VO#b~>o6r&J* z=}`{}3_XZ;@pGwzZN3RT>Uzf` zBQq>0XGo*$_R+(;-ZJy|i}g`PV{Ge(s`vAkYao^4+sv12;JX(s|IVa?bjHN=Hs##z zd`qxd;qSd-K&D3rc89<4Fdx?SLQb1En6YmV3Y4Z8X{n19BpH5vz51R4T9j%z^#R_} zo9|dldTS}6W3{r}lZFyhv)}v!ubHB_n;qptnQH|(3;=1XO!fk{7fpC!wg`u1tZ`Ek z&v>>u5Km3fp5dpuKu1wQ4^eW18=~a@1}i&HE_x!UYirA$4gT_9C$8LL7A89>oJ`i* zj+Yo8^d3hxRO~ehIA2@d!k`r|gABZ0_kPvX*`aBpO>%R!Uu|u*Q}w%L9Yk4LgR-#A zP{BH15tMlPwL=)w<~=xIfqVKgYV$UeD>oBJ!nI)D|CkCRWdn&P?vk)r;t7&+8KH_! zhmO7w2^$fBm0#aJza(%h9o7k%(ZKlgq8r6+x)*;;rlPMrraGv9xcek!VO@D)lwHKE z{GmFF`ZvqqOY|XCUe}XDH8D1mlI*|q7FYe&3?^BsGtC=Rm`+<=O!T3RzcTn;*)6b} zflMNm##jH1l)CA+-FI0wE#fo-$m;rrj>QEWPrUCcEj=(iQFnto);1IGd^B75Id|^I z<0FsHRm=zds)`EU`c6Pc&gd(q%jeKXNKmtJ(X@Guyd)pxu*=8DUvFc4d5oW`qAw}V zk2lWSWncfzvO=Q>V|5JbE*E)X=7{5Rw%ugZ2h;p`I5foJdGvF5ntr#9(7rQ8nPwNV z!SM_h5~y|Mi?xuPCWn#t(uPj&);;HlBg4-8nh--XS{W|tm3!9?);`JLpNw)PDyQOP z4DYQahe-J7R-U2A8DjT^)W16O{b;i|b@5Q3a|Qu~{<)eztf{jx(XMS|YcngQfh zCl9ou(iy0WMeF0Ocad)&;BuyNd?V|TKg&vQsqdQ;cD}(SRlKZza9|~0Kl*#$>X$>RR^4U5g^C9@f0?YQRM5i3kEf`s-!Wq+X(bS)!_6g z4U|!#PgnF4QA}KoO85wNHR?_#APk3&1DJbnAEMaEZ!2w7tFdCxySz9JkmF+oQ^RQ0 zRVFTv9ivwtf8gviDd?|OQx(Ffq zae7nfcv(%=uzCkheV|R4xNW*3V6vY!K3fSb7X8;Z2%9G$o8y@X=I2q>ndGKwV+?eFBXoJ%{G;j+M zt;v;@f5h?*!xayqXU8CuDjRk@m7Vb3j#2=D-@Gv(oou6C7AvhU@#>z+(v+`2`3&_mclAnc2^Uz3E{lEd+Nm3xVFM94w=b%B4mi3O98$n z`+D&J`Bq|Fq;Oj?e8TdT@(iuP@k#zHN;u)>IvLn1j*)B?^MWYEk3BQUbP78RzK7@w zrLJj3M>an)UW0w#8y1LNltJga&=9d(ZVHfo^z(NVqXt%!4Phq(&xJFaF(1%K22+&k zL`^m}i1acjDj*;DfOcRbXY>z_W>YWr?6}!zWv8bsqExb;ybh*@=#1{l3n(KiA0HhL zsVy|(f!)~NsB~b!YY)y{{&s8M`I$;CdCrfy%+TiC>T#~mt+1_{B~RRQFxLXy!3vuk zm@;Un;8+$(7L0$YTO?}MnnQzHHq-)aeZS@u6f4!hS%}@>L#ad5w)21{we6H2#3QZflbLA~Rb#-~cggG94AOCboS8c|S8U zV>@kW^@6+4VURnnx1j1@X9ZbmmxVhcXVn6y-!$clW}JMp2f#uw&pQ~lecz8Y@C??c zzsCqM{V$en^OdhJM_k$Vs~CRq6SYdvON?%JZ$f}bMHCEzz=tEj4I#TglwwiQ)D^O~ zhz-wasy@|WJ)nD}D_m>~nsW1q*F3%hFH3dd5)Y5=LaPVQZGCtQAWP$PUpVR0_$?)( zl??lee5b4%#s;A8ocXk*3Avrx%KW`i>duA{5yIh7Y1d1?I#9i^H!m|j=O8hSh(|J! z@m+6}yVAw2Y@Tc&X((Qlo1)C3LzCOjqpoFtEg)fn;}YsBxEC6jsH@5TK*Mgo6gE5t zOW*RPk3Achl%C}I_dw=#xvBQB4w+ylrZ800UR~vp&J9>syG&Hhlp4!w@q8{FnJ6uX z5kyqIk2Gv~odjX}bi`zPK%Hz+vG5qoqF?2ELr&Wv^wb=}&TJIX7hrFT_E|ec@remW z_&Fc5@L^Fke%51qfx*%JdF5AoN_yCOrZ^H?;^P1QQSD$wk*r_Gu~qZqeuzw3zBHy> z^_mpsh|W7mZQ2V8YJiFC+gT`^w5HC>tKoa}2kIBd_85T!5l=&>oF^0UZ< z)a~`17~f;*0vA6jT*U;tf94Q1&~?3p8fq8vxs$soadomT{BLetXoA``>>sZg^1c6O z^>oS7e)aGc<2w{_SSoGG^4ou!95f6?@esP7)GY8s15^WsWxB9_Cq#= ze@I7sB^;uo3e&ewW4J|%{J!-xo50-Hoqk#73p>2;&rXVl>;-!2;`^uN{T^-TMP%>; z(ZBNiY~Z+@o*7u4e3$hPSHs@5b&8$!@7ttUX-E*k_tMjZshjX44|j~TnEG6}*w}b8 z*DXg5wH5NQweKP7WZTWCdduT9$Ly?3I=!hmYUSe6QK^PRIZrr3?ILrL1Lg%;Ko3US z(=@2JmO}U9?_Ig47fWaNI1I0?ME7%~J1k>9DCP&MrAEnf8*runC~sczullmrS8Ne{ z@(vCAZO4xuw5WY&b{$h!u4W$%E(%@$@e$wHQzO6C9?-ix<}jn!>b;CB7Qdky&P!)_ zqWs1iJbE?!R8h0r3@i7gFv^V=_x86#R{~Lqig)Z>3~nWSx&_99?cIAHuB?rb`EBn0 z)Vq%-i<$JD7t!t|(}IoLKnS`p-5CcY^%?rrWYoIkFd zMgFL@u#gg)2_}Lv3Mll!+Mzi6uhOeur58FvRD7%W%#YAbCXO<_R-WUrv*Iz(I%c=X zOL`1W4@Jo4_|1h;bBb$Ls6t_I?n(K?SyX(Wwc$RT-Q@q3>(Ts&{}n(xNda_%iPwRW z$KW|8luS$D2AU$uCol7`Xcj;2n89EUOW_93cmP9H?r_b>BM*p3u=A*14xx`h;vQMK zo6r>hpb>LFDAfkf zUlhY2!=(|M2zzl}qX`|LrgKT+2JE=o8lO@JBO#Yw?-msYki(aa0Xp1p*Mgb^fV4Sp z5YOPecnGweewxky66K=6MaXwPo{0Ggf~t zo>`-?-?^?yU&%#l_&(%^I$p(~U3jCTWW66oYiiM48KHY5|MH)^>?4U{BQJW6X_A?L zQ5DB7tK2z0;)xkg5gU21t$}i=vIZ)P-)#z_R^H(c!Z)ewY=))T#5mOTgbFyC5{+=j znrNT;9_vjc(6SVMFq883=}p*hrhJMl*Ntwf7_9}%2&!zX@aFQJe!F}S3};r=-zXu~ zKzDfWGJz^ly1OcLx05xE9}ZN(Z)Oj#Hb398rn+QMZfmxu8YAR98XUxR6zjpf*35%A z`5#Y26y8-+*@klqwx;ZG+LNPo_-iOK3oC_>1@%*Oi_@Jzqg^ zv_*h~fO!ybTr<0x3@HEh{5u3AxGxQs>OfY$`~B zCvbSr3*;?i{T8r^jPB%K1!ZXil^}>*95tHkQ10a`6W~G>2!S%^ff=ZVhsb3$zyUuG zxEL^+A3j|pcj!N(t1pnTnI(`&ZJ&FF(jm)&ItbHS#Y?dlIF~Y&h zXhDG0a%xYRp@S5ZGl@z7OPJgT!4E<)uL}~X!;1Y+_2d(a+c6TQ9-sO)uSaBeg*|bw z8TEhgyM+`qx#y`JVt9vmhU}a+{a?ATJSrj6$wTGe#srG=GkrP53alA@z~1p!K^LDtUeAc(5U48{08m{(=IkXwwvYVWHO*3LG5eHxe^ zg`hu9KtC8}7L+MlDgeL#AKa3^a}@~IBYW>+Ye;xLcwt#@G%M=7EiI0tuWq{lhg6rX z4I&!mm>lzRC*si0)pRg7p%iK4Mow zDfmDE<*mDZ9men(-t$(g*f#=s-bmCfVCP7mJOR=pYnrA=-uow-vv~hsdc`1py0`Y? z1OI|Sd(I!;a(!R)gZu53gv0EEH2VUsL)HM&p@ipf@Y~wtkorp@Ge%)a_6?#0sGR?j zI4U-eajyckx?YUF`Dswgmja-`^r@Cjf@1m|pmks#&s`7RDs@j@WH;9{EpB(|nkRcc zX^(o(`!CF!IA%Siik~XTUg&bSPb-4X&UWzacIp8a-zP*FLtElKCW!Sm=TF0=dXw(P ziIfwlO}}tN{dza~mj*FjDp;^S@|t&bnmkm8#nG8bW)s4ag`uli641b-V{<2CN%Sgb z>a8UA+Ai>o)T$?#hW1-v;d2E$t8mAIZ{*%_gd$cX?0On1Z_e!;rQBF)a-V~-+jYPc zc1|sDu#-ZA9r^X!FVSeIAKscRtK*Fm$1IwcgZE-&*y<}sBXT;!8GcAM6NdNaSq5v} z3LN>fcGc;_7hhseehdH+w9r12b}q*&ittx56WN4%lfM9Z#1j=DwlH_Q$DuP{8MqNwy_c`J1-KCQs(x$M-c|PJ9BcCKqPpjR$kuq}sNUU? zOY!NK35>ixtGt2r0klthMB%1jc8KR#Pi4}y|z-$&hShlS5xUy_*%zuC$K}| zRG`S*UH?*HxeDEWlOOeB&|}Vqeyb<| z1fXqtm832fMNJ}Op+15HTfCxUmD%b)ldN(Ha9#AF+;^?Q`$shc0r@%i9^j}X=0)hs z3{O;=e~I)u$|cAmu;g+-PHWhCZ|CN#YTpiZ&JqB90%sr}oau#z`V;zz*}cjHM&{$k z`FsGK5SZU3OFOqO!|KQh*YO2(YFMW3Hb6CjgcovaXWt^#dt74^XlRX`gSVAJ9XO^= z8cf9%ica4W17>0+d7G##A|l1SkdVcY&?YQi^??fQpGB`N32`08|Pc!3HMm%^|G-;FLo3^W`% zmb*CxiQUja~H6(2D4 zF;?==ZRy&0v@O7LqNH)L|DXmT=I)YBK)yZ3;m_<<(Fiw4lKk=KsSUa3Xg2!jc-^-D z=rV5Je7%X8PoZbJkg~d+eR0X;sRY`-(<&4qN zPNGq`3|0chCaO5-_KXIjvjRaPt9Cv{P-Uo=;1p}$BZqKIAHZsA=NOOD%CdvKosH>i zo#BQe?UdwPifFdo85YOvA{#|c=JA!*s1%9%n~%HWZ&Oo|xr(Q|phuJhvx+&4Hh97@ z2draKH|v=Dj1JTjWr^uQ<*~r}SUGAQLilqLVb9EjMT9a$fa*PX=92ZWE++))mX30R zShyy?d7h%7dp8AJT#}1CypLN;cN*NeK#N^ZD$197UGkC4;n{7Iqv(@0YC>Vy3zCax zR-a!}&r(`1W_fPeb1`r>9x3KwY%`2@ncR@AzkeTP0Vi zxz$Gp-J9wTt!)x;s^>m3%=9JleMTM88Rp}h&p|V6U(*L z#o5~T(>=PbN%|@I_OqrUfjs-eE7JCW)7q~|AsPY^tot7M+XK4-VdhL=L(v`?XDTlK zYIW6b1SAuZv)=Kt`|tnh`QW7=;v|E z$CuA-iSUg8M{C8YBO6RpER3WrS_t}7X_`s}ZUmwG& zbX2N)i)S?X<#O>uRx-CG+}auO)GhU9mTl z8PucilYc(8ZSh)IC;%7m6Cxp8d+bu?MWkR)E5$K;p*cJo-}j%KgHn6Yd^~Im5_wML zrRlOTBrvC=UQMXsd6sZvS!<7(wxnl1A#lib^LlmZ_X(yALGTG@`b&4f4Wn)bS@KO~ z`d8SBl~K*{BH!stWtkLHH8pr=3vrW{`{+J9mFr_LHy`LUnXkf0q1tUvpB_|T`&Nl& zP1v}gqmRs6RDRF7CQ^Ys!3qCR+DqOv@{R@Ho3Cz(+3>`k@;^_7n(CF1d&sIJm(#ZI zP=loWrr5}?dyn^)V?c8qWQQbc_FpuJ^bG#za7o}?XGYeOwAWuL_m(a2G6O@t}3e7nAH(=4sIKVjS zgK<+@H{RmuS}8A*@u^*r1@@mMbpHXiV#48L??|sc^Vc&|Ol`3#Ob@VQDJz%FmGs}- zu?S|94t6=aW4SKlMfN7wKUi-irDjg9#@YpERxe2lOo*S`x3qx;7r=wNaW)s{-lE9T zgk3)tvV4;R+@7M0U~}##2JGahlCSv4=apj(3B?F&-);LuJ@a%8`hg``UD7o3K*|^V zZ>WD=1bO)}k6FV5h$c(kylW5muIat77t67(ogoXbkfI-Su|4qZ(joHa(CYN(_)0e2 zz0~K#p8km4`4PJu+&XrW)o>eb8)<(#U|P06XRCwV>wa_z;D&c-F{lezOh@8&~*WujEaaffsI#5QnX=PYgxZRNV`G)T(Xau5~J(_5Rrl6cO&5U9O=1g?I&3cL^}rCOn4}mo$zj z@c&NJ?A@XtQ2uXYt3ps+^Xflys<;2&e`a&4W^+Vcp7AbcCq_dl=NoD|LjB)TZ8 zI`%2I0&64dO&EJV*pls8?MR(BiH86HjBaFP@x#>@G-MyV4li~i*&zA2lyZr=Ti!ZQ zObM?WIoZJkBGAmIj`Hgu>zJrmPLwVN;k=@2Og))<97h>hk-j9L72`MjH zn7kl*iBv;LXG{21;S_-gh3vq9y0b%J41d3#2|pVA7=D`}S`rvp%#yNc zvoKTp^knRwRe0xEf9n7L-*?AMmz##o)5^-kh1*SW)rOnF&|h1kbMt8&tV42)Qc;4M z>;XYGjL6@7%uczkWY$H%GLh~0g^RhiT~WKy?ic|(3v&-z(hJ(%-HP3iq$yvzR&%fr zH``%7@1OSDtG@VIWkb{Bz|#r-9A!$2&!$H*|H7BdI1TClv|VwY70j`r&y?gD+S^i3 z?h=>?-|{zkgga=g2iigT`&uN{uQqkFy(%M!KqS)g=<&5voG%T!-`~amMCYPw)9ib= zl=~ILYb%8cM_Wu|kCYX5xCJwP&~BwDg`NP&QBP%!H_p#Vc8$EASYBTz&M0rESdbJ6 z*lLkAkzS+0g7Uf+*Us)hPR!#G?r%p2E0@zxm{PX(F|q>Zc-0Z5FAv03Ct>ahTf3CA zD3;KhRg^e5oGX-yXl%X~H>QGi>CfUt*&Hc}Vc>J{4@mH|Uis<~6j7}u5|(oEzasR$ zsEJ=aD{}dx;#It2THPU(et%vJ)I9IS)l7Q~$iAYU?GM!TiNcL&__XZngUICOncQ#Q z+}yNOh$a%B3^gTTw-@!W7>orci?x11FVZ#Yv7iwTS>8^>W5EdE*-fpnbH50N5mQtt zDA>H^Sp!XJSt8*N4>A&Fk@GRKLwj^8K{j5aboyeZjQuUShG+Wkr``sS&=SH-JJ0w9 z$Ooqe;1iw|fdPFU+w~4fI7TEs>mDI>yR4COymjFLq9M1~tg>&GP){g$A(nLdDU!U| zK@A=`_;+4ghNFduroh{kAyN@w9N_j(d~{v2PYx)$csUA}GqcL6ZtgzxF6(JhhorQ& zw!Vk&^yW?^mfKTD#3sQ9i+_RIrI!_$G*JHMmMu;>8g-HNE6uUg7$Q*X>8f%1wYITB zU4o&J${jw@rb&z?v9?5>ww$t*v+ndXkNYlTjqM?SS519wnR0A5a`;Aodjm&-&daOE zbDY{`2Q8)d##$7Xj7z}lDK+Su@e*~|tSeA!{{@b=kJ$azr#9;C3rwdjySwc<9IYYN6=EA(oJ^PAks(&kfb zO;J1d%kghT+|19)lzC}Mtg$tH?CQxjzCoTf(}pqQi3Ma2m_i)B@}T66HUAvHFpl&8 zo{XiT8V8RCTst89k2H-VNaE4~5yn5RB!J{1;@MIDELi1!q?FIQIRiHG;_z2bDEsN* z?ETpQz#PWJaPoF)^jc^8iNsTLhv9LRmqYIS1Fqi2n$OtUlTq`Ds`M{9+lMEZokV9 zxuzPRro%fPqXri)my{r>I~PG+o2yo(D?z!UKjF?iIq$cP%bJ&|_XjtLZ!D(Myxh=z z=)knoTG+bNp+=H&_IIfNHzZ`Co)n74{v_)80`07tG!6RC=@8lQMhQOssk~nJ9?0O* zg%RtH>1H=D8dIa33E3R&SY}$l3bZ-|RP(g^_^WcUgshQEg}IQF71TD7sKRsj!kw%Q6!{MfL%n+xSPg*bC zSL53~nPAUo9=GHn&6j^oC@oPfg4ZG+@!+5y7NUqiVJR|WYdeq|Xqv1K$TRCIN`T0h z8;1D(jCG$SEA`ysbodu~wtMuo;$uDwIA+|#Q+Ll+-|}Aw!T(Dz!p8Z_2b;6jB%HyV{#PP z%~s;|DTBJbfLhYSBNCqnO`5!*EqKAIuJMsC-D>k)EY z_T29&9M=Ng^T(X|x(+aKN!y)rOHZJE&qdm{)yBcft0FxN1u=Le0&vuvY3qG49n{OC zNtZ3DrxJD-uO&AE%xQO#ZD|sG(tmufL|%j(hN2l@=r>8N$NBw$qi?r`04jOMmUon} zr4)5c;#wb*oJLAa@|VLE1}{gCD`mOzh~x&_#V&1&B0}}@KXIcFDN4gG`Sk=KjdKjZ zl;;S%V2S|?2z(sM#3yY(gtc2TM18puZ~)F}TaCGXf7lsNDg{qoj+4}zsvn%BnB%l3 zsUNupyS;QWc&{P_e=XL!J&eAWVv&96i>2&XoLdk{y`#U0W>l3fw{*Kt!90LTc6}@d zK6CA5?k~M@-se(dNT^iy?P|R9k8j4}toBL9i)*wnZCD@PQ!_m>wuPmI&SnxRdJ39~OA01oM~oW0=c0E4V!EM( zCvU8109uS)8J+CP4tEW2%~PDjrIUqc!tBqcxUH3aB|vQxqK>TeO%5+^Z5*Re@cDZi>>WVm`8*=ixgOm)1(j?&Z+x}f-Xpm#@ItRbe_GLq? zfmd)|_gPYOYmOTIckrM}b;T4tEuI#foDZ~(6vQqrUY+iibTs+cy>;Oqrl{eyJIs&g z_5&)uL~tJ*tmzXOmmEoWot|V$C)n40Wz)-ei$a+SL1aW%mL>=mxK^a}2(BtCRiETs z$tGY9B%h(RCip$RZQi{jO-an=!c#E*yON&hoQ_H;!MVq(*(8DX92j$g_+#%qN$bj? z#TdxUee6S^R3csLkf5@dl7oze5#id3YiOe|ODebg;_-1w8|53(EJXh^#S}xQm}^KP z;l1V0o(E3D=i+{*f2CwR7cFh7#_w(@-KN%IK4Fx;!i z+iy>HV^~)GafLqWFjc64Cu3k})1mNciCEnaQMh|$4V=~9OgowA6pl0f#_LRRz7yE< zWoBK=J=9{j^ivJpkWLrk*E5#(@K(*(IZk;$%!D}7nc*biqwtUQD$FR9b*GMp5hy;{8==QolLWF8KHQ`r zSU+*|+@IkDf58w#N`l=`F;;>iw(8T$%~t!BR``K*>kUb!&P%^ zUHt$@`WV(QfJb&wzQ&Ak@K$AU&5GUd9N#3EgRA#TYGy7iRBfrj9MY&UKSH{wdM zzz1(Pj}-F4YpR&d;N^K&Ty*(d5q_S>&0<~88ya`y8!&48eeq#Uqpz`~I9HwKHV<^F;o~{iORvJ4_Uy1Q&lZ62 znxv#Ke^E+%w?i#en8?b@%1=6%SgY=@-ET>=|OM|qSd7Y$iQ8uZ~@F94i{6wxvN1!s|VXV_%6P@Qlz_@SKp zIa{I}bMNOT+}95dG5mSMHN-A$w&;je z*7w_gkSbM-3Jn?t0Rg3J($H0eMySbr!(TRF_>Bz}-d)+p%3bP2uJrFOwgQfkf!#b7 z5`Dg)$wFt`RbJ^9KmALn`mUUE`0?%A7$J4-`O0Zv7GJu)y3O$1LI_r@(< zRM83!pmvYrOn+?U8+&J<<^{33Vkd(yp8|vwHTB9m!Zl2&qHFUff3Ifu;+}kL$DpZUKd7#$m z;LqXIzA6;vI43IATq=-rW%nc{)^Ozz6I9d*fSgV>0c%T$_X_VdS2MlcDP~3^SN{?^ zqI0=gHs$ zX<2V9-f!8zzBr2`+T-qbcT?lRc^L{4G>W(5(f=Kt%8f>+;>lm7(h;fX|5hcwfgRcoGo>e8cL-t z+xqOKA9wNv$z|j~^nmG46sP_8&6kDF!%72s94dZvMLa!8VsLg&u*@CTE{!?4f`ecB zzW20Oe7LK;77E?u7%lTY$iC^vhvOlpg>K>Y^rdTXd{*bd|9-ap8?UmfX*yC1wBC9A ztL|%Ea(S?O>ikY=_51L#`abaTrkHqL5lw~xWXX3F!cLtWHPJi&9!z>;K{s<(G05|`~Oki0R= z@ko<)e;-nvfG)u*HI6^nN6rUo5;y3W3lBc`DE-~{_C21KcXjWEUVY_MiNq`iP6y$8q-#1mE($fcMbx{zeLnU;9V_z%{{QXr(Vl#QORxeC8SatyhJfmA~}W{kqRKJ?d}* zM4Me%1p;`P{1*Rf>R&PDzHr8$;Si_X{UYXnjK-V8hgLc$UL&XOTby$w$bFxbKk+il z)it9rki~x?%jVM{Ev(MGXO1Z8JgQBa)pn)V`Z>J^QiVj!l+q%@V14w?m53yTIkQ3#szvpbw`2+K+>eK+5(9;IQ-x5(*iV?K7jFTdR69xUMU?&}@ zGUDHseuTL|1|@q{GdxLD!)CWx`inqLMW4AgLs71|eHWAqspg+rfT7ot$kc@Yr_6I$ z3v#MY4S7_HZ?g7g8a?|AQA6=U8qVQ2)XkZMiv%JBVWu>XYHjk!;e_b+^G1_&_8uT- zY(hIZ;El&}JPYoLOL|4Z5!V|B*)4yINsf5(1a>Yl-h6HsfKs;mK0q) z6$@aY-7yyTk79OIi3NOAT)T40_*S{4Ae?6?;uqij2i!4SfrlvJ?b_dl#R!L+8SFDf zOZr)Se5!irTOJY8YJT?gi+j~X^|Q|F3GWs|Rq_(%5ZG8Pxr%uT5NcKv>x$d(#P$K> zxbMLjHC>zIF*y4ku8#?Int3R8Qo6?tf0yj`%plu8{w(^1mv{=6H-^Rblo5u$ zGY1*ZB251M0>|Mx@y!{w;2<%meWF{eK&~W+ZqocRd12NjDZZ&Pc{&CN(z`pb+rG}F z;uk4(erLbFDjZPC@;G^fDMZ>RSr~AmN#}U(H7LrgSD{37h>RP{R6HSoMtxafeMLIu zl-N0)((;GlGWzriBtZNWzsHy}TbY`@ zkZc_60^^*$-IDpNB*^M!Lr$!b1yGNc+x))_E-sKMd~mX>dUGy%`@$dB-CN)Hr#_bZ zGNAQdKy#$P16=5h>76@QIxx9I28OwByxztNpSQUFYz{GWOt$ZL)wBud_A#}y7@)Lk;@(;e$zUe@pkQ_66z>;Dah4*!c zkDt3#h8)-lus{TQaj8clnrvcM{muIndcd!0-^$ZLdAOWd+@&}9q^_Msy8p_PVDXv- z9k}B&(wbGR*LhcMyDxLd+l?6N2R;4uGeE>7*p|MF^vIE${J^8hb7&}URB6y+Yx;EO z?2#Q~MNa3v;*|p^yJksTr;vSLb5~vZaqq=SyB9XDuvmQBDfg3}S_aZ@My~X*TXOl^oq>W}VE>%g{=E{~l ze`j>D74SkZ^?`8^DZ*JM{AqY_GQWSxQKei#daURyrQ=oZd1!~O2}SWQ5pyoSo$%Y> zgBa5Zzc-Lw!&-MirTj_GoZssLp`k6^;Y$Hk<`0xI$7?(~Pru{ewXox~)Kl;DRc+f@ zSYSktngwfoTI=fb*WLi=q{Y%L$F-HpC1TJHa;L}D!vE&BUyIPWZOQX{dqy9&s~EKy zw^a(W(*O-4Y_%5{hPNtiZ;ZqVR1R~ijFKx=4lNDU8hw8PHM@D|*^ra4{M|LE%!vfZ z&y>??4-sy3W}Aq?h1VE{Ou+>fP7V<5^FR*BR8V`4^;JHc42Cj}9LCx|kj(LU+RR^l z5EA>}S(;)NaMldpWI=R@vJ!;~Eh|DY{PV*_BAAMDt23Eapr`zmoW|i9K(rxWm3{%8 z&{8zhLYt6H9ZQmCem@?oeQF+{x_S@QQUKl^ML#ez6vjg7{*H3+GFvd|$t&ldI0r zKhv3L>!Qmbg$l6cTq;8sp51_;g(&lp=DUaTSYB^J`nH-`^LU9piyY7FEg58TD@R&- z`xC%Rw~H2ZcIzlx>pcx?!-<7CoxNT3LZ!b7Iy=@s&&|@6@dLjzQ#(pleA_8RNb|N)&#5lg^-RJBH+24I4 z8KdO8PpZs_aq5OQEUmc(x=UPVV_qjw#3=l=!Iag3zx#w!x{n3 zbP!v#Si#VMW3d+wUK&D6>V{R190!&ydtL~~f)M-kAQ%7jXY*dZ^UUY-#+5v;&~(J; z@{e-==&;E0UJ(Z#Vi~uQ>qLm7^Zlp;x1uA=T=xCS=yt@-8<&kqY8E5=8K7h`Bd37; zw#Mh*J}8cH7WHpR;bGy6@DGzqmK3{hf1c-xPN)T=L$_yEna}k{4c%90<3PQF>--^A zkA^tE#yHbu1;o`JgA@1eu7&=A#VCjf=7JBOJXuC&phbz#+#6$efJ?~@zbIPh4@eyt z{dN|oN4b9*0zvsKX)=L|1~500^?(c2P3t%RG3NIwQ?P;T3sDqs7LU|Re?V90;T z_FF}|?JVR^FK@}bih-*?6u`Dh_(Cf2$1;G~x?it&&nCeXKmX#>$9q>goNH5#h-f&} zt8_h&XgC3kw#N+3(oK7lft{k9RnkR78irLZ06HW;@xlZ`M=r9RAWef&3O}WuB$DKz@AWIypGMS~xms}0<& z2aft9xrfDKtok57(B{*{_s+*L>H=K8ziOpT?%oyib>EE8xF6?S5zDyNz!bEhAm6uH zB*H_%zbA#Zd6ZKy;~QqwwTS{nr9YC{<)Wx<(&)N>vrd1U*Y3n!?S9K}o}#&nCqXVx zPaw@Jdpj8qz`hXuelE>R4Ngj4YA`wThm6k4O@tf2H#S}G z)pjP!m6gaK443bln%<{qaCNb;7KTRFl7g#+o0I(ne1gI09_OoGF-yckqnSoDl@8FZ zl1V9u<`7E8V%J+y5p$k>RBstH_VZ*TGfzN~kk)$)y?%*^KvDr#o^klXv);_?l)6K$ zgniM518AQZ6E9PG? z`{bTv|K$F1E=?IHE$}Ev@|E48&g8gali)qDg^6?Vi5AEakxnFoQ!A#_#UWDQSMc<9 zW#e!8=v#k&shP^eAeO-QE;hRYu7MVldKegFyq!0A52wvbHifKwNs`Y(wAIJ z;{_F^1=2jfDY=)6#RZDoFXibLr&HMA!Bp7mCop~O6ua(;36#+H6fg*WSW zlGB)ML))Y1Kkj*AiRPeBAKS0!cPE*g&+)5+{)R`?Vf|2rTKDYy<>>W|NRt#da)81= zqcV$)Gf4t~^p=ZivH+xyAB{CqdPkSrb|tS^%JAtj_J#DG!J7g;o&szdb7d(hW11LJ zSO+ual37yQB+TxlKP$5{tbxLRa%-j#oFE&MCE*qEurhO3gmsL3*)4Dd0J?mS18f>g z`rj#ncGWPQa?}O7jaihg^im>ai^u0;KOx)#(aB5{@|nkPSnDvI6li%TkoUGaX$s;2 zLSi$#UWZ7Fi~%b5X4RD-#X!ZF4?&uI9s&*Bu<9(lPW9;Cyt3!e`m3>g*?{eQD!3tu_0xZab_H&|&*tY@vagRR%ef zSZ2hv^TkW_{jYaT*WQ@h3)OE1nrlMi)ga7ddFr#xZnNg5DkH`c8fpA9;+$3AXP=?_ z|7l}zpqmgIgf?P!WW77~vK3BaBkxslSz`!c{VeH0`A60+tJ=i9XLp80tOhK`-3iBa$r&+ThVX$mrH2O* z`{TZ20R1f;hu|VZ^gjWg3mF7?Z>1T)v*B2WIP;aQmmg5$XS{Qc!mi$UY!zWN(_bRC zVZNte%-EN+MI@j?vy;ZRy923FzpVV`s% zz-HrqLhY4?1S#Y-iBs_IJAnZuYxOYyZzN7?I;MRsyVsR|JFo0FdB+IE9FFYCS|Mfy z9LXmsl!QCS4;{L{W4`#Lyzgf-FoDve!HlfX@Jdj3J^C@T#|2=wTewXGu{Z&3$HVT$e>AyUHkR|+$!mMKY6n52BGL>9eYX!Z+)Y6V>9 z{gZgXxjJZT=~@JT&C@COxakM0Pb98r>uU^v0I%;>)XvjU`)(C_=kBGHrHddJ-s4%_Y)UsSskyaF4xcJVApGh z1}^QkZIy^|e`IJgoMsRx^Mk8t`zn~8r0BNaHmrhGMhjYXJ5NgV(^8*un@ zRdPLReU0midGYRcr*3-#DRHzHm%_f>Lhtt?fxmOHDHb35IBKJH0Qfq1!Rg)jwIC3Ef>vwE7W=+ z+-v$oUbVS3(aFD$HKG-ZWQ~Ck4b%4K4mUL@LZzp(Peb|pUbi?Ox&j-&_b(i>^ER^j zzLNj`BYC&qrgADSl8${`2y;4sMVM0E8L6BydLB)oBku!f_grM~Vt$|@yom3FN9##B z7&Prb_bgqZ_QUHYyq#bAo;GDe+&|HJRj;0ewQlZg(fs|3C*~1}7R8hc_Z9WubaCWKI;4IV(l38MI^{}ep%trn)$49fxWmXK% z`gty8{r&l2HhLGxA(TiB!6At-w*)mv9hd;k)&B4G%fH}p?tJm7OGzn-TGhwh!(pwQ z^|ty?M?!S|TNh6GI}aE1h4R=fsam&oa*dRfrfX}v7{#lpCbpk@>X5j^cp;|0I#a>Y zv2U8aUR6eai7LK9ywoRW5SEmR{_dP$va1*bcZ8}T5RDW3HX3iy9cS;2^GcOmw zEZg^C1;Kx_?6lZpe{wSVq%Sj>+npK#u0fRA_oS=G3TEYQk%6$1OOzO1fXnSAp$4TW zo0Y(OgJb7LJUdK@;%}f{V8=9oD1?#|gBUX8>74;aBsI42Yg^zNC;WoJ!ZIseBWs`r zFpg5?$+Ow?O4ROIDYKKtJSM#7v{H}7xn0^GjqEAyajShx#lq)mDDB!RxHf_lW(^8ni1~8rWJ<)j9yR!`zy@<26`^CtHW~+d)K1 zyC#g1aw>kQkmY>6(Ey|Zt-J6V9#&*Xspgdv69=6CwDc2{&e$Ex9#bQ_&>QL0za~~T zny=%1_yhlQYDtCY!_ZzEZJeG=YWc|C@VT;Qr^)jQvTyBqm4v1=gQ5FrtR#H17n-Pu zZpGG#lHFoYojsPd2M+z0Qwp=cn5oF`_WLTf@#VNFi){xsmM@$%{QTqa&q2)=;#DX} z{Nksuf3zp@eZeXg`np&C%>;Kmm7*-YNYx1pH&_R+e>@l1TXRQ80B+TE?gsWoirEGB zUZ)}&nn!U7rys}?hco^;OKiB2f07o(-rQF2W+zLH^{uo1IELDwV)ou5b2mDlA6g)v z&cA?Q!d))$N4Cm<%TmxlXq3aF{hI@G_O730G?cBo;Uq4b&gNBu4Yi{Cx{0#kiZ~4E zQ#nasZ!j+vGjbsMKw-E`b7^yJn=i%Q-7kOtE!*y(@oQ#&Bfrc`(fDwj^);IW?0Av7 zPWE9niK1|{Sb!1>rF@tKxd&zhr~{xW_8iZJlw# zKCeZd2T+qFGfCU|&HImERJ!eQSXv}ti(P{ADD=?Bf216L1J~~tW0Eyd;$imJk;>YU zQW|(sM+bQ(bg0o3XOTr>kJxVK-#Mp?h8yZbotX&PFhK1G&EtHceh9Q)+D9W9qMhX8 zrac69W#`>S72hFg;nRuy8=P##Q01*yZhc3KoZ#*`Ipg|M4-$8ue-D42Xz^*jE?qAzYJo7)(t2Egb!ZU(YCY$E$}85OND;i_^YE~Aok<^n)xZaGy~ksG5o`*89S8p z->Q+rO)f%7llr6+2eQ}PaZ5xrT0R!a${u%L`9+Or-D2lM7HLHoyav)u?J-L|zKdpv zG{YdPFK0jrEgrj~p#a+)Ei_N(X-BFdtn)%o&H%OzBgOiSngxJ?rk4|ZgF(#j{=IkF8_+X16vscjabhaG0^R^%VW|;q4uG$s|v!Bc9 z%S-2h75eLe2sB|449$yu{XS-lMKn^b;=GRhZ58xaFw4mdL=~v9Se_vnzAz-#ksVe$ zpQ&NF>1g|?4F;tki5*NhM+D28c-sown@v)yad|l)=e5qIgz+m!ZOT)$)Giti$gbYJ z?B>hgCb4JM0-*q5)h|=v6=U7+!SHG?;wCJ)R)t~jgx5RjIkS~727zapd5A;W{S=%40#M$yjboV)5moLki$-PqjFwRtc^u|`Q zAwkTs2LC=J<3WGf=SkUDfpe7x%JxJijzvx$Oj*#)e0K%+yNu^|Ced|R3d`>8<_#nV zJe-LafEC#9;P1HL@(gfh?XBc(+ADRh#&Zbe*dyKlOgsQJjuRHY`$m0uF2ui}cK(bg zn$O5%=7`VmTMof*7;pW)fzL2pn5Q z$w{+L3m?Ao6b?MxslF)f(L>ix#ag5tCv%D-l}qxndpqe4^Wd3$l~vv0+AOT^k7~=u zqq^t1#HF^XJ@@eqe&ew;ZIEc*O}};MaS%8!v0ljlU=ba;H$j0SV`e&^3*ds~b5xU$ ztd8rhbvj=HBzP_^pm}$Ha6NJSAK>fcRxef`dTSkRIg3)fobr3Jv6~b`aMvLJ-uksO zgjutic&9-j)0My~{69muOCg?IdUPw<+@opTn&(o32-NwFn^SG{YG3!tE^!{*d0ob( zL~P;LnzDDV`KSBd-Rzp($M-7;6lvmbBlu(1X7P6!T-3XNtBFvQPkGkj6WEME6!~p) z?Cxe@rs4x9OfW$y%7Ob(o+42sVkyg;U3KP_L4`#q+1xi?0`H4PJcLsvOTr6aiP_k# zKfAyZ98O3smVYvfFV8duyYik3s76uq``7OV4kbxad9^I3Q;V|gq>kz5J{v;rO@v#Y z6{RRQC`}%pq@`bmgzc+5m*t2ZWZ~wfatU}3QUUM+-zxh{Prj>cJC|2R7CfoQ0WD`E zVMiaBQP8tCo^`C^W=j9OquwXH=EnFBx*VU3Bktu2F1z@)yUir{tA&k{eox5n#4tiYJY|-3jq(1UxQwnzLNIKpn`!mZgUu@CBaM7;K=W zCpOX+o`c6f1j3D#!BLySGJ!;3?9qiGLK}jy<#~;d(h|hKRF>Qc9cZ82d-D=(fYlBq z;D|SFtBa+c!1Ef$_EZAu=>y>sfdnrp+z@1Eoj(^CtG{VYF!qtEmB8m^k%xh2ckYJg z8DqXc975n!>nRTkTbJfj1mF?hp;w?%-U22h+oxEtw)_Q4=QIFV+B6ct(q62RR|$Tp zbeO`QC;NQtSj$~k0lPfKV}3<4(M+P8!4hD*3l{xWml?3VeVW_A0X|1>Afd7PNm}Cj zvJnp1yZwa;mXrhvS|)PX$CUwOS`rBUB!0m(f`@SC=ggl!0c1y2xXF=iToPl+f{lAS zrI>aal`+XM= zB~ose$OHP*F^6A(*fj>yW6BgQ)7QJ;wxVdf>`;N4u4LiVadQSx1xQWJ=H8tqDajr2eM`7eLgnywg6EOt|W8^C?1Vp?3_ilQRl#+6U=Hq`N0 z)DA{zfwO39YlJw@A}IqLPhB|w#mcx@I|B%o`6`GVIQdAFqQC~Hki$&Y^Vu$bsdlay z@Z(&i zYWLk`kqCX2RGT`d+^FOHj9dl$gQ&4>;56BgTTU1tA>wZwtLnaZ8%tWJMUtJ|{Nq>s zk9k6%2&e4$j^F=a_a|j<&~E=sRw38&()NB>&cRu><0wR-;yyXC(Y~K8Nhx5zY8sKJ zm&L3n!lyowm4*{-n6C_3K+Bk>MwV z&txfQclA-#9V~8hbltZ@Cc-ZSrL|%KNB$#{UU1qYIXhr}E^c~g?PuNmY}svYvl=Bd zy0<;}dU6H!c;wD4(5KYso6r|IDfMxch2MJcJK#g5G6WOeuJNU~)V8fpWs_jZzC9JB z@zSVoj5?$STTtu-RiDrNDZFGsw__m~Fh-7RwQZl%{T`b@hAdMGG^_CcmVNc(V@Af1 zJ$9_6^L;8*JIh-qw9UdDp(BO_=sOUjP3j_iL{2)4q)vGhX)s1D_BqFQVy>v}_Qh8G zjIB7xS?sHBMs2^?M{lt#5VO2iUmXA9qRT1Onmk|dBf*$C=T(S}Fjk1N`F^MmFJ$|$ zmrrAOHWV!_y)=qkaSloe3g$LkQn(zO75Sg!uZjdzi`lz>DiGMamZXa4(b6hQ~^^_|d7>`U&mr0BM_3ib3VjT4MZC zCeO|gQvBiYrZw~B`&+jHVJtMJ_R{08b-nnmHfyV-wI%C2jiUT(305u1#5x5|mF}D! zu@8Mu8Ard&Pe4ALji(NG@n3u_<9?lCuqt~#>O)v4#8w5A{YLHg=F>MCLs}VO zwZL5rMlhEy2*csiS+q>(R!>5C1owaSd2Ehz{n$@Us%3KycX^TQ8R;mLXMZ4%i87Z( z;$4#8KcO5%h)W_U2a}*>US3nJN!`9T7b5Lx@q@C#^`&(9e{(86kG*T%5@@~;s?_$T zI!FieGR)<^sG$zz6EKJVoc?Q3$?YNIi(vn~+zc~Y;$g?|MS8hqZO_anV;&8zf1cW! zHJf4GsyZn?xvD@*E@1t_QtTj`_9)`~X!OZ#yl$FxKxYWPBz9CuySxUn0P|#9oYsaf zfSoVOY_S-G)}}F#s5h82nu$gsCTV@cgmVdV$~ksoW{0d*R}B%PNG_pU*?X}XFSt~) z3>6%sIOVkO|J33TVn)qdx70vF^2eACokyWAzl~r~8*_5i!BymXXEj?fS(*%QXBP8; zL6TQmHavOZ=l7Vrpq?Ej?48QpS)(Xi%fw-Bk4J}N7(R>-xgC;iyH!$_||Iqc;VNpe0*!R#SDJUQfD%~hZHws9DbV-Ahbey521rz}R z0V(NDNl{8#x{>aYjuCkG_&o1-J=b@A-#qL^ekJ1!9i$9aZ2SrY$ojxFeKYOM4jhd_X;+@Is0Oc| zQxg0r!BZ$_FX}*%<86xC|7+C=YRG7rcN1@zOr>hs+0Y(~*(`-Nda-&k4kG_R4Qz5%G+)k2c~(yxna}fGzi8=Q~FJ;*!hW;rv0{)`*J=k5#FuS z=JKroT^&XjFB*!L3z`1TbWi;PyVXEE^*vdo5qP?;GNhPF|lEJgZfz|mZYri{sVr?;9GXvQ}Z;lH#^5UN^Yc{w`T#IdYaRToGdXJjV zVpG}^7=j=El)ui>z@yCHqin|2qHlih;e;H>CD}N&U9<+HQ|dhgz8T6U)N2ZTff)oB z!PUis`w#)!h6A3r9x!0IQ|t|gND^Udnzc|9qi})-|KYI$oZwgp;>i|?_$E9Xll&Gd z8DkDAhe%-sa)>^I@Tx~AW~ElZhhyhmRy#;xk;?h3BeiDYU2ZlO(&1PQNK#PNn$#OG z8-TSYx3L-Mu<^9>DmmT@fq9hC#1F0<754$-kKnpC67aG@nGXg;ysUnifcC8@4^9q! zfjBV8y2k($&Oka?nM!zCy%h`rstBhN6AdttyV$8v)C7;@pI?E*)NtK%VI{I<_}BG& zmcKM$di3Dz(Kd7u$9bHp`OOOWlPE2CML?zb=DhFT&E9q_ro>TE()zXZG2?yLY>Ioq z$Ct_+o9F3Vd&FHEC4z0HGer?$7Rt&M$0=UXieZ}!tJ@#e&%W<6!lbW|=KCb@nm6J& zSXtgG^@$XJs;uvsTIZUL+nY+x-)3s&t{8OVy~Hs2yd+gtFB6aF<$0J zkk#>=`V|fQE!K-pk>Pc0%hYjl$3aZwI7<%l!k%uKKm;$nD^{(NhCQ*<;{Q6Wm2S1{ zfUEtbVXQM+R|HNhQ*LAM;;vR&i^OM_Pf70-Uz<27ij?!5EFM$81$Uke0p;m7nX0hK zNYIMzj>JuTs1xM3Gyd7peL1xo?MuSgQ&150qd8AFW1V&aa?5=BC%=9w`cB0yfzrpx z1rN}F@ToS^WzPKsHQef(47eW3=~D|?=Aa~0Ka13`NK6h9q4gZGtS9#(=)Br9j_xJZnr42n2AL{iXXjv zPa+-mOZOEPp79H*G>cy;e3Jzx%P2WuvOIwUljY?lV|jJszDmbcbsivR&`f5LVhUB) zYsk9tGPOef)DK;w%(#I=(^XXxH?I(-x%6rim9kIqZgv`ysr}ht9qf_l&j94S!qwN} z8|mtq*aM?I#!Qt33k4F z;zUxl7nq#*b20>1)pV6=QPUFmtEq=DH!L1q5m7%7zFT}YOK2|fGdZLc^AY5ICTGPh z3_8=={HHUm^9KUpj`Q;5aQ_DI7>0hRKN<-S>2RlSu-{$CB>(rb6yfbbED$LSVgYv^ zjq?(4F98zF{|t@`xA%`D_XT=1H7mogbW53|B4mq;6L_+J_PGIVMrlNyA4Ul6u?T*F z8g_VMPe6Go1b{p|@PK5{0}sGVCNaQi zDNY5k#g{4w4-jKXt{CO8T;XMwr$JG~YTWAWP_EhfX)DFfBoCiK&{89a#}5U$_;e3k^a=e z0b^VEXh;gG4-|6C>Vmc+7@Dh7pNwbSGUz!vZ;h-8u(K*e1fG?d-jk`cR}7Q5p(hvl z2P_6;dNZT(bbzPZok&)0$E1d$#%UB%l9Ek3pf6Hh)aCGA!iSa z_RNxjX~%@;EDtUaW_2wxQozNa!-vB4tTk`1?Uv?85?^5GXYWFWAnKKVB@Ei3Gei7gN^~QvE-7mIY2+hTsQ!= zmx0Zdf+QaJWDpE!^=Az(P{7HzY-|ARo+eT{VdK8Q_zb&)Av8F%b(-WQiJ4^sazO1# zZHOnaqS9|4U9R|1Io0^1PuZkEMeD9E63tS({8Gg~izJ_!RH{^10lb}f!m?S`9Ju2ZIk&LjPS{M3wlgAAdfqRClP@EF17G7j1|6LE&^zTW^HmH z3)w5c4}l&;_lJ4_pbb<4Der@GP8kW#IjiKIg%-$%Smd>K1|Z1+a3l}xjF`z4?w1hK zuug*^UZ#l!*T+V^HgxC|!Ip}VNUGT4P0U<4fQ{>NWz(K1%U~R3!~iHf0L4&<+EeIN zJS)9bF*F%PqlYdP*q;}ukCtLJ2kE^Ehw;8|9O_iDMlZMp9>DIxAkUNX(4r3u-pC3_ zhMH0evDdl!d;*W=EV~5GPY1 zj;N-K0>+5|ADO&~1~G&1W~+vk3GWq+6=$wJiBke>`Nguq*>>u3P0%vTSjJSHUfT-9q8xYpC0#0qS-v8!yOFKnuJE4fU9r6|4%(60&H0L*$V z6Jf5t)7~_|&F}NC;mArOZ0r!+%j3P=Ayo5(KQB&}_@7A~tedTA?4@G_(2Wo35M?+^ z-|;vz>fCRP0xj@H7I=ON1LUSW{R{l=53sSfZsIvFS}6mNgU_!K(6dH^$oFe|qV9qq zcabl$@V-~Vt*bVJsmzC%!ME3BIZBgs)IV9Fc~y9MApw}_5s}tBKKVCJ8TC*uuHC*w z!H`Z9u${KqbM6v?8qQgBbzHiuYCi78i~St>BV@95jV`H&AfnS+&a&*bDqbQ53He{IZQJvT@Xp4{n@)01mW+cG}} zM@_H9Lx#4+p?wU@0fyWl%F@NcvF!aZGa-~V%rB1bHmHz|VivoXg2LFE_+5=Lc2Mf2 zOL+iH3csYT0e?g~gMC@TyZkBXi4-s}pB4f==s3MluyzazAu|~>aw~u#!mjL0NoEbW z@GyX+aT?nP)#%+)5%{deXyt_=Ao}Tqh(J`aL3}Pnf&y6w7A;m5PT5s<aWwf!`tUIS?$iQWJ4qt(lUfoL|cotOD5?BCTZIB1-$v_7rsd z{>W_h7DHYM18@eXf$@R#5Dn~o&m<)<`Fr0bRSSq}a7kpD?k!+xf^lFP;ZX52?|t$ad4U4QG|1K0YzHZ7l?N*2VPl^R|l$`zzeB3e^C~h>=FfH9J5(x z5eTRcazGu`{_#dIsuWBNbboekgm$w<`*LnvLU(O-{YHSO@TJRPEfBJW?%)*duMSiQKQuV27NqtbRUlycg>4lFZS($BcLJB#z*ndZxv0Nf$kp zPGK_3DM=t73pxNRu2@n*K<(C?dyae{uKr`_vu$9 zoQh8hSzg|=*WDSlMe#YyJ{Awtpg`suz!p>=sI_}uBty2JDM*|EPyi^auRGzio_k+i z_@^a+fI*q6?TyrbI7TCJ3e~{+Su`W6F^{Eei((5}0^j8J9zA~A^Qhne7?624K-xt1 z6$hZ1q>e8r815g{O3>A1+bhi^^bXkG0+)Ud7MSM+`V*gq-9a`i zACCeLESMY)y^C;>PX>rD4?x$d=$-BmJLi_g=Hu~Cfp7gU>7qg2sl}AO1VvYv**Wd| zrzg2;YW=tk`Eei63WD@OeR051yzi%fUg~rk;K>G@BfWoCYL~I&+0P8SJ69-&ws$6- z4N_s_OLP9>F}RC}Dqj>?IeYw71$KhwoGwKJ@Qz$fmI-lS^zKNl>ITO9sk*%g@Wu+_ zI1|hFY^MT0;>b9+O;+gaeJb?)!`Rl>h93aOLXHJ_a(f|`3sOw*u zRE_UkvvZy=rJ#)2Z%vE4>n$hTGBdO=hD5@=lrREC-Kah@L$p5Vm9+3o?0PxEu z8KaF2qtBWzXUp=4%j|@v@WPxVG{7ipr34l4bK!a;Vh;`2v% zT8jhq0D?nOAj|n$7eUtc99Ts@-z_7XICJ4|*a?ZfAE^+1=?vVs7j94Ejp09sg)cTB4e zyIR1dQ=RXW%r}6^48$kngUi1=l7MkT*{Z=c_=5=CM<@HY z|D`|wuN)ufd=#+2tmRJB*>jTDegQ5ZoP;HJT|m`I3e%B3L@63Ll7z99JNAM^d=?x1 ziHRD1eoCHAh6?sU*SD=N??GvE;~C`IArSZlikz{3k{lMqW5In>_PTt_=nnSOTlY52 zz6}A;@~wy##P2ko!rv}9S-;x?VE4AQ4T;!^*xN8rr>{6d8}#f

1RL-R1poB>X!- z5;M18V%x1j@&BLJXlP&|i2|Hd=v3-x^GC=h^wd_MgsiqE7)t`{u%q>5LS*A>(B>ry$Cm-*kzybWY2|tnOnnJBhQb`dJ0( zf2*Fxe_f&yaizG1{*@nNHbD7XJ&39{_4@#}LZ@UW`#|;U^XEkk^=@B6h66J`pILt6 zQ7I|*5M!eeyT9=^1Q!GHhFS&@tGXc8?EL*<-S_e=<6n`jO*DqM0XbW*B@Huno1cA8 zdBk!TyJYGNba3kc!+QKjANogCL>?$j%b~)~&nPlcutmA&!jM+z`|?X`q(1W>G_NyD zzRx)2>o!up=ZO@Q-)&mjszDKc!MGCf+wh_Lxnm$ZL?;G1U8MT|5Txu z*-9i|ihI`ZCNM8W1<>?*NsI_QoVfL3MD&k3K8B-?&$XYHE>(MyY1^KU=UNgme4(=e z^thkj7(&(mHLh%>dssosxUSyPAxG!TQGU>^YyWE|>8^wb8IGBJ+5KBR>;-x#sM2k! zc*qN+ZoM;|zt$0;vdq4Bv~qB?07PA6DvrzdnsjJM@}zv|+(%tjbY^;};*LJ@(;Y65 zdW>=(Ap%szi>IH}l_^t}r~LPDKtYlt>I?N48Bkt=>Z9QYzYB6859I3i-jW8Bq=36fmkmI>gnRT8bE~CbkN(LD)?pLPix2 zI>+CdYcg!3R~?hXw$;&|DzqEeFT6oOKQ#iq{F#rN`j(R+C27q#u4@?zq323kQb)$T zxq=9BZ5?r&cW(9P1Qsk=K5E|_=|z^yg8&341MNxkUTK6w8RGm22zgM?w+irl3#?Za z?sX1och9z#TrTfuLp;bno&+~8>r*zA`|ed=xtX*+@Fs1RBJZ@Nf(Phg>L z#5oh&l&w)DolHd7YQ6%fBcHfG=xxHuoxgzdXB>E_fO@m6YpX^+QOAqc{&eO2j zM}ShEJtpI9);@^;_mG|8U1T5>BR;2UlR!~(I%m#fWr0KwVutMgvU30$2a0@idStLM zyWnT|R-fztC6lc4!u;D6W<-2yCOtUH93$B%zNo{+zHln?P*F9#v|LbK_O#;Nrle$y z=@JXyfS+Nrv0*zwE z{fkYz_&9)C(XIoflw`^cnz~RHu)c>1IwA$a0Y^mTwk{beOm)64H~?qzSTes$1cc;) zP3wPQ7J?+UD4}Gz6$%qGMQ|a4dW5||J;F|9>QH#G)D-a8v>Tpu7$`xN^~$K2u|bj& z2pdx&@K68s!cg4#Po(YDb18N`XP!H-GNh&*6@>{-oyzUYnxsET@t~Q@D;>Qd(on%^ z97Utd2dXU7lfbQ2$(?|bM#iD=Jk{U?*o%8{PHuL)@kjv?p-}OOXARd-C(!yE>3nHS z0W#1dlc!U4f`|`5$_TAjysIde21^&)j5E6Xt9GY`bFn>Fs0jHvGgvzf*aw10b^RF= zAmhl~K2t}zu;vrM8&{-A&raAu)U7(z+3T96l(+EQPv#u}4yA#iA0q+Q6ZK*cq~}-* zZA6QQ*Og94CahMjMj(}@Cq48Rx2sMS2;7>-E1)hV%Rd_5f3gCNrA6vFhgzL#yxOSl zN*xHko8F)*sRDkY18gjS>f({n_NNP_V%<>yyI&*89(mzgyO0#>h@m=108=#z%QuQ( znVpacT?OGU2v(Owg8fqiYLmdZ`A4z`9ZfKtt2ysQsO zWKgumQ5&M=GpDDhSWDM$CqW9Ol=S5UhdcViq-O|BfxgBnKz6!PV2iZtIDh}2frV`E zASY3Ayc#$7tvxVH{&!gO@!AeTfInRIIBlM=B@?;zt-|SGdEn}=XVh&rIfG{Clqdem zt2+(-{y{8blV_rk-btyw{~$x|#q`x&3DwI|>DjV@vcQMH?(^}rKZ3`T%=tGccOjf# zPGoqSW`nYr#Chkv+dwjX-I6(h6kOOk`q3Qhbl$YxTl0Q=ciaK|5<%W#>%mDF?#82MC&gJTvp2M)io!k4PSMfao(`p=RN#duGK(0 zT9lMY+FnFUIOB>4_%!jYUSAyC>koE{YlvD23kn&QTE8Nx_plJ5mX}d*y>G=sWYClI zx;AT47G8_I^3ky1AjRtmudpeU;A{thaOt}-wcM!6ef-w)_m!BuTK_AHIY!N8`6jzB z4s&H&?0QpW+hsbfH-FOf+Gzn(aoZCsRcrI3%^f2E9db1yF7dT+9FK=1`!i#pIp&yhhYcinZVY zduy;MjT0{u97O);*%%8(P7>OHi?BW3Feg5E$H3U$R7N`V(EwJ84T{AaZ)<;|)f9c} zZ-?tXPp85iE(oJ@ERU*J3QbbOs`-2Ew$msQCE}v%Zt+9^wKkDP2aEzumj*l_;X1KF z>7VxFis!kAd9x|A%9El9ySh1xoIF0&dV;W1T^L4@X72-ixh^>C`*bl4tEE4QC|T!P zJ=|s87l1l8$#EiPH8ZW!q(SEgSa!<8ieJ(9DV~Bd~ zSQs>ukqokV8jcrJvz+P(0XLwtG9C#O(W1e^(D+eoT5L%XQZ_Z@a4Y?JA5}!Qkxs^2 zFRBP89*|k%a7^T7C0!{glJ5C6mRqM!&ClldMjE5# zHVnSAy7nGLBj2l>*Adpm%lb_-Tj;64gr>1t49A(Gd&v-mw39m}$CPs&DxI#5g2l3e z)I1ganX_lqiZOO}0bh5Wl^T>`;b z_aCm81;b*AfsrRx8f=7m1GJ*djo7Q}(ZFRWUba8Q^VCT*BglU%f?aQ~P^zg7rFS1) zC)8?n!-TO{+@}Xu#7qny*A|GvHr}1jtv=DkGYg{)xz$sIenf$0(r=K zEP$3yWl`(e2~*@^r(80K*5zx5YVQE%xaHlJKKL^J|DL2JBmUsjWp=Bb;utu&6RE@} zI?yGPorhe2GRY%!JR$OR?8R*e|C0zVZ7zEUw}NYT{wtrExbciA7(N4C1y7N&)FF=iJIMP3JDdlYG>3HASE_SOscgw37?>|LD*NZk1^kx~jQSDC8VA4t%xZg3J_F-W%fBIrH;|#)7 zW0n)-IvSOIM<+)|s@ivT94||(8y7)raQblNQw2-5-L$eX;q8%{Tk083MBpF3uV1t? z&V5;O2p4uWL)OrIch1|E&g~U4r8FIqPz{%WZ5G(mM@45S;5y_Ao=O+^cKq6FgeE2L z`p3OiedTjPSCv+|L^86=xTh96M+F&fSZt7v)RY95y@|9n*q51n^kBI@iE-p8NOo%S z^IYL-GZ+;Ii;*-CcKXAp!z&bgQ5XUHd|Z9!Ww8!--17lOv2dvyVQ>`T>BZ(usYwDO zu?`Q!5O89ejw7P;OHs>LWPr_9XLkAeotuKzP|PQXQp3*8JGuwhCj}6&rpqb`aAut* zYL1P%$sQIG2Y(e8;p!Sl)k#vo>-@|f>AmWHz(9PAjso+C=|MJ zTgh0hOy??N)c%RNsvQ*BEgnk(!0Sad4)h|K{SBcz(gP9k4>{~yEH(@X^iF=f6fB}+ zoXeZ=CL74!%9SY83f26^~a+AmW&>Ml0i|3>0c2bWZNL0{~kd zKHQ2Qutze%i9CMlFR}Ac^s}^WoLp+)24cJOv0qzF_1R*d?K4vJy?`wc9WG<9pNK9x(U*t0~J)J+Uzv zA6fnD)N=DDp+enut!En~b$i3kZB4-Pu~WZm3>xsf0kbhOWaX**bLu$tm|&-;u};IR zh$-KyD2L&G4Pw{$TC6@_N26pb@kS?;oZFK=(;3aL;$*)n#F7mQua1xlQJ0pB{}Qqv zoAo|Yl0!%t`GpGUx82_*s~b2iRGh-`Bs#zayujBYdRrOQscuSdpYCRUrIEC1v}Qw3 zeF8C)0=-d*QNy55sGzzU@}&a%pn+RaME#DMpCXg@&Q@btH>0tD4c}}=K-$Ta#QbBO z)X0zk2U8Ol$I-mf9eszoTBod!ci<0HOhX>X^%5&mhrb@+zHl*@aEY|dU+ni^dRHdG zqQ}#Z!%aFsbKjcK6VIW4q4WOBw0XV8P=Cnm%$b|fbT%Mcxj^kZ$jL2eqi$HnIoWp| z-6L#S$}z#!E?%bA>l4&^3Vv3*4G!vsrDZoWP+Jx#_TUKLp#hXXz6~Ihqny>~WIeX~ zkj_Gh<4T3&YCPn&5czXk*5<(DX}zkC;1*{q_vh28tCLoqjgf$9y13V|84#E1jklcO zyKc;tc4p%o>lgQ&=|~6C&7DxE(etl&sAGuhHY#V21IGM&^9rEzRqSd->;yEv^2_b6 zO-(3q0{@=^x&qK`Q42i>L%~GdixU>GO*%0(bpR?Je5iNFV8z9koA>*GrSVXz)k~M6 zrWP+M-7iS3=a9ild~4jI!l25qcdkQ6Pre8zYAP}>^H}VMiZP`oNERx%KU^i9z^s0F zhC5sLQIs(*o_K#zy12Spv1f9vW`i^QSb|pL!!w}`kvJuq7=L>%`9rbCzH*E7HAzXR zjer@b{K!j&&Rq4$Uj6Tn6;8eBBjNzEx7!jeI|WVh2GTIO@*V~Ubuptbd+tSL8P+0o z;!Iv>%tKViaf)9R}EnD z+l&fe`da37RxTw3TBj~lo;1iUHto_lZ_~u2RvgZ@md@nhjjfQ1*(5j>H$MCH!<@50 zPS8D2!1CLDZwLlnOZdQxV;U6!w>f=ECAbUL?rFujWE!Yy``z87uf10jKy9NP^q_2A zF1hEUXBoUVJw%+zW~T9%wI31WiCc?vM$RXZ>c2WF)>Y8${*+hxMNpa2?~fgBGf~q! zyzz?nx3+9GdE-@;ePwvRkPOhpe4DBgQ(nf3n%?4TPx^wq*Sy`xf}xo^AZBGHrJFY@ z)@KE>d*MD7{h)>_-jl^~dZ;p!Yc@<#DK^Ve6(t=C4@ue(mmrPvSfzp_CfIRex><*^ zV|7KO$iLq=1My?ZE6I14Ng+5dt3|#}bbY{3cfEOMwD*z*t~*a(po_eZ6Jg=^;2Qyr z^<+Qj6C)6U@pU<32vZ3kn=}}$)Pi9a!V?CrTaB1PV$htKf)^hfqDusp&!aT~MOLtM7RK&Opu_S`|z;je|q9rDCGyM;gXrl@rnRoRPR=-)z= zIX#~<)Xdk%K`UIjo_PM6{Fa<+n=Wa3g9UHW(9y@ohYP0=#@J2Ld&0umiwBrj#!+4*js`ZppqU~ts|rDhB!Y??a%eOSMWF*M`l zMKCnBCTx{1%QE;4ud+|-QFLRSX@dp}fBcg-%2Hq-_xupgclk*=X@nnnQUOzzCsjp9 z7dJ)~DqaW2iSlePB?KLtA+bN^fK?LTL(rCo2|L~X;;*&rP`7%yczCajSo@XEpNpU6 z*uS;yg3G>R1XZ9LyPh6XLzAhWP3KRf>g{*%%Jx?=wz15KBeK7&v;!8ur(rmHvFGma z+ZnCsIY};cpA<2MsEqy%^zdH8ekuQPEo@^mtwvd~VM97!i)>%>w7fJaJsR;?Vm8Xx z^4q=A!|XV(<@XEIE7pkOm3HxRhMS1mr^4u7!`K{Ip8PY}OL0Mxo+t0>aKNZwQ<)L( zKYi%<2ZkaOsIzoLSV)b$GTetzYfLl|Woa~Rf5Y7~lNuqq;-mPj?&HC2dSaw|TM0VW z*46H2WltN6mLh&@CIyy)$AVH`+*ltxJ28H}&2Zf0e_XK2O}81<@ML zKnN^=F41&FARrGj*oVcut1ys6mqTJ!6!9?>I~s`q3C0c%;4Soz0X>)WHy~JE_rxZT z1PfgCnr`E~n**@mQ|Dy}v%ff3klIJUCPib9J^NM46rq6T{WApFhLm=cA5OkN^+QZ^ zEG3P7=M$&5GH_PkRQOI@cK8PjxsmsnHDmSykYyrH?wYuK`|GDK&@_%Q(MlM=Ii`b` zSb#4yaDzd(FG+JB965JtChw}H=mErSA6Zp3ugrWiM(-1ia&t|97lv_~P9>l0*toM=yY1@G`$2Ud7MrxtdbL}OZ8K0t>mTmS^ zKkR-AT{;8(Wvaj{v7%3sl&2xyt?6FkZw76D8$_P2 zjdo8GXG)yX5gU(LzI@XGGklVWW;Z*EvHvpR86O(^a#|GLg8B~~TE7SGi?-d`oQ4wZ zXA~xD#TxH;& z3EYWWnm)x>r7ggYpl2t!d=a86c8@G{7_8d)^^8ppJwBibN_^DI>7=S+*HxGNYF3#z zzTs@Wrz!ROXCgc~v%qV{>}LY`SBqbWhi0ae6C@WsY$P8AaBkh{3C6uS+%o1lvtbiC zzv;2k@W@Qho(r1Rty*EVBQ>)l6E#c3M(^k1;#7Wr-&<#BtR3#kh1&=Hx}0nJf6j`z zxLKO=FwRcU#o^`J3erS95mIy2xnOzWBU8N$_Jm)#!>$_!#|r#P_K4HK@~(Hi;4Q+r ziu68TZQOh-@rsK-&vIO5bg4_atKl7Xh7<0bLft=cc49R$m2bR#wu-xMeapBb^^73l zDePDMxH}=cGjv-kwFx`cC$JVXufZVr!M8B$q`C(?_c!}?5T=W5f#+)WGfr)y{6ajp1_`IVKeiJ;9FmKTtV;&M$w&yKebgx(OvZR z^}9yr8cX&hu6oh=+K$3>+2t>$rV#RqjTLbb`PnF#XdEggzzBvj?6{1{b4kAl-J-n( zwOO3h=i|{4(;GJRjSV=*kD7Z>!5s=NYhNXo!(FrE4ce*`JX(bi(?c zJUGwL>Dr_3q7I=#N=+lxbra>}8YXxLpY%CMTgd+!$o;uuN80ll-nTchbiQl z7ry&E_zCcri^tvKum7Ebl6}R|AEX3+Vjj2Sy!r8zE(fjR|6s@^W7o~|oz2)>{nD%R zt?k3a41s4+yZnVs-F;+yw1ynYZ2R5y%+s+7q7r4gJ!9hBZK3=&RsDy)Vp-Y*tLARL zT7rRY>d^~3?5#6lV`t$`woWOfS1r7Y zfegs;ln>unvHkq%m%qt@4U?bhkjd^br2cX}&Ufx@olffHB1$sKQla&cx`Eb3nV|0% z-9TfBjr~&H_gV%{WxwZUv%l)x_2X=$UnIRbS<)#{1oPMMLnh*APHXror=+yJ!8%Hv z#n~F))ZwjzqzZ5+2#!gKzp`5#=k&w~fWA}_cc%~0u1pnTK0xca`p&OvZRcR|ECeKO z_D1_|&WhjL=r%hG=;);q427buu+6hv7r$pWPs3aTGMlT~lj#?3E`NDdZ?E@f__&#q z#nVVF6O$NI@5*+MDfGuo zMKwbD3m=-B_o3YY9D^T?7uRCd+ut>DF=2R8{|dGh z$2h~#;qH%Y%PZ~m;vu-XmVXqzz2Eh!;z9fT zFU{<-r-NbWXL?$}wFMo!+`7uU*P8Q-B`g&!MjY5L^n%l-KA1Cj) zlQf%Wf=ylSx6m_R4*Z_`{rzfsPVswe+7r$xq(FJWV{&&tXT+x1pEr<>B?0l-$7kjU zf$@AvPI8ybMqS|#JlyiWuL;%i9C_p^F<}>i7`D*8&Fnb=!VI+~(hoC3-l>~ z{rcmN9yd1@NVlW0kyTTI^GL_U?sfk3e{Mj7g0oc_mW3j^5-%iY{B%2Ti?w^BKe)h* z@El%nd2?h%cgzn6K;z;#p>@Je+fSpXKiFJmcJ6mwsByL9^a&E+xnpKM;HLfBPFVl%=@8HBu3k4A z`HgIW%{a<(A*BCLF+4j3yWAjOZQ=AU*8_!&k_8D^6Y&)+B^G=q4O~~R{L;lQuDz{a zz8a9`iLd0v#jQfSz=5;l2cNd;Bzub&{f#f`qSS6MVa{j3g`K7lQp$4$aofK*`Q3K2 zlHBwQ!cbSnz$AykV7M@v1Y=_y^?d5+2QZlV4h+Va%=ZP2Jh_Dtiv;@g$<8g*A&(9uvJ-&N$vcEkr8@(ZU z{pWfeao5_XMhu@=(oYOx(erxTv~)Spokq|!*z0a@XIjdr+ef4GtzU|Fd5+W$*7+}9uBaV! zA7;9^dL7l@m_7EtSf5NQo}F!~M=adskT4Q!@;h_CIJkSNY}$r|*4B3x7jGJ<{0;^N zh8`mpO`5-6sa_2p&6+OEwII*qqBrX47Xtjx>eIqA1Flc{oLkQqy4x<#{~TSN(J#(j zxwv~>UQWh6ykRv-Z*BC^!oRsVhMf0bsnxf&BF_)j_d2(t=_S$wzqTMx2D(SvuCA}= zyGP60u8|rG`?YCM{TKRc*BM&>%lZvH(?I07>GSaLo2%oxrBRoS!p3UKqvPq(FP$+% zZ9ai5hL&#)0}uWd-z{(TI~dwSTEY5ljM;-OThp6j7 zquMVx`^W8>bfKdm-oEkAi6=%w{4cMU%fBo>v#XcR{gGUklyuezF*v2S{LsvKle zg}krK)42D}N(S;Ur@!yXW@MbAxIpE`b~?rJcuHBn6>7tj{M7V1sW$kRwYl|rNsVK5 zegy%NxOd8B?sec+m8op9f%HcT@}jV-aPriXBjw~P>aW@aRRml;uM`~H5VOQ5Ki3+S zlMR%(YlCkUClt3y2EIsh`M>W>qF7DCxg;(`+WG!>TdxQv!@9yx8g}gx&NvcqAwy|2 z^4E)gbKM!BBgnubr&6TQ9n!ksU(vrt{Y+oZ50>%xs{L)f(zN`@``Mjfv&;s$IGs@( z*1~}Cb!Yn8t8T;IoTn#v-?#4O(_Uj%cYQETnTFAfTG>b8wy|=fZRHjQC@?pAe*Ge^ zFObmK9;=euGK6PS>dB1=2G4Tt3H)d8&1@eODGO?@Cy!0-P4wEj zXO0}2e1Fct`u!1g{w0fQsUG)`F;j;@ydv}Wmal&U!sB#FsHyhH*ASxqHNnF@F6G?N z;_n=a8lJhgDbC62^w#qNHJ)jv+j`t5c_t(~-<5B!4zv&%N6Iy(eabCa=TJ$%LfkNHRUL(kq{%I4GDKAw17ar>fS3pP*ou|CDVN5+!dbf=iaV+2s0 z_TCI#&l4PaC$&xbB25C?D99x!*3UM-+aLouSeJvYOm_DCRL@GYjw3}X7tI4BpSNCW za@fva#yAD!dx4z$pYi%h4`}Ce?gwH?WUIF%_cvkWq|@1hvIpxsopcO8Y8o1XJZdFE zcbslxU=-piS4~ruZnj5tgd9x2n5Cc=4D*`Er!DDC6(q;kmgk>NqfN|rwNCsjt+lFo z9R+^ZnX2-WqvBaeQIE1oHHOe+7Mp*g7B=Y4%r;?Bx=77Fdq32Q6(ScVcdhJX_Hi~q z81Lf4Qkm|QBkB$M;`nZbq3f8>ZChrc*;r?>m#|GH$b{tg$_J zY=_Am8UtYy!LS<0#PHhEv*PMG^+;LJcE~p_<-;uEM-0etb=YvWc&9}{9X|X{)3-Z* z9s_9V8XYYJ@F=;3U>GY_92qQ8M~n6%M?J_3UtDyAl%u-|2QO!NIY;=%d_+>riXU zQ+=;ClpYYWje18UOx#=yPU!eliK0EMh^dj^&qw?oY?!>Tfp6#ER;Fcnqcg@~1yPR5 zf0)9sYaveMEe8cdEGeyX{!@8lcUWq+7e?jJVJY?>Vz}^{X9~-k8WxVGcf%E=UwlvYaT?$eMINpMJq zJmqF@(X-f9J~G{nCq`GNP*xd)r{4ysqiKWqNpu%h$9=+1Fe2I!3DhvV58yrVLI|`k z%Rj4aAFe;Rvj;1f8hCHZMNcEQ>TdLDUP6E6%;1VUtO}&&n-pIVtZDP z_jHm5yh+3EY%Tl`H%yh!P8yaNT<(PyuNx_X56_2`Iv*;M>G^I{5rv^wiHD-Y@=_*3 z5GwIm>wZ))CDRW(&2;!Z{OkBbIpVAgrKudtxsy?RuCE7Mtr-1Er}`*A36zx#fNA-t z%y8iSel2Z}$-N_ssJ*X~o(!`_?1J$vx-YQcyS3Ttu%2tiW-y+i6x%U23 z{R-4li4RnTp4uunC=)W2O6-?5Iba?CUY-vK~3fU6^@1XljPhzs~lb_nUZ#q_J}zMTq}$)W#& z3|Vv^YYKIK%|^cpC;9ClSJcI0MQA4#Kw?Mz3%}nvV)GJrfG&sboZ(}`m8`@RGEQ28 zQtlEKpU-yEZ@Vj>J5%RKWGo#(GIBzi+7N~oH9}seAQga?kUt$K2=|uFwLe|3Z5IoV znE2y!kJRZN{UXVT#L@~YldexEIQS3kx$ESGZv;oBW{`) zO5-sj@-x^&4DDeFjWKMN(WtHcbapi)&GLUmGA`kI?=$Mn6RTuv zsBPA7Y3h!lzPVudaE*J^D4kgDH+1k84U@t54JWx8Cx3rgIV3zTC!(jeErwR^<=fAKN0fV1(cr^B3b4_`nA`={{yVrt!oa1r zrXYiw_dc{AIVNG60aCtq>Iq3ve+D8HTwy_9x9 zuJwRr?Vyn2WsoCAu3bluk$yAdFTuVZqv`*ztKC<-i-;lI8Y{szAM9uA|0(QCprL;M z{Xb)jrLsmc7-P#?wy|VSW6jw45}~rMN%mzFF=QJ{lU>$?G})JEkw})TF(M(^vhS(; z8GV2Md+VP6xz6#-IiJt_dA;}LIUZ*`ZhPR!Y5pAxML&*0^X|xiu|r}33q&Fpx|$&% zjyFH#>^=qWV@#1FcbS-L?uD=Lc{k?g`51^xhLY4j2*q$y%r>9TEL@Eqb7o?y7G%8$ zvbIjd4NJ7%b=Wjf*^Y9URM`&drUt8vwB4YaigreOb==*`J99z% zs)|**(`CpH@ZmY6QSF)vwa$P$2~qalCrQY*OBPn>>Uc=aEXs!_7l@?MxC0>R@%h>Z zNtKWf@cVM=`5xE7*UL~Q#j3!Bz|<`d?f)4`tYFIQ!0-h-&FHLnWIA5{9yI2CcUz!? zw!MvbkLbmGtjyAT2L3TwzprEv^4h?L>`g`T`lywHVbgEQ*AtyItluw-u}6r3&+~tr z=>b<#bgu9PwA*evGZ-z;sx*>>xN$y0I3e4O4Q;1=P7jYKF@>Cd=CMp4if25nFVZTi z9*Y@2ZWsz-Y+%cChoZm3gy@jq{pvAn6mFY?o1xt%d|if^k?p`2_ z6u<{V`pG@uM)$|#Nh+rssy1JCEEXMw1c;%{jr>hUF8(>QLKs^QAre?+YUAY4pnh}b z(bZACBrrdAcR@A~ZY?G-9b>uF?88K4a2-k(V^KKl`??|qMttD&&Ho(%q2QNC@-|}b z7FVX3{jLWo-&j44;Xp-*Q1S{_o3RP6rejJU>H1v{L`6eLJ+DA1VqOMKA@rQEs4q_hM`{2k{WmtMCE)yOe8aY)YAqJ9p#sbAZliD zh&Q1yHM4Ja64GQdIhmQq2d#Shb8%_y>OvjT44w1Jzf?g03~};OFBKs4X8Uum0(oqG zqa_cRcGuA}@jVKJzH3r{csmxYVmxPUa4UAG%vN(MWGiE5(WWNaR!^DvoOvaU=^K0Z zov!LQh{cleQ{^-`2liywcV8`PDQT#gr1h(OuG<&Af5 z6Z9!T%`7s=^vJ}|v&$EZKq!QO{+1AB>Yex)8lkd)U?9)+Tyxp&^(ThTb`BS5%TUg- zOgEap!i8XqH8esi&pwpcOQs0%goCFQv$mi-t6^|3ronE>*KM8y%p@0hSU?M@G%tvy z4M)6vqHO)}fEsk&!#+^SU=~pGPofJ5Sh(@i^T!|#X*gy&)9%r@h;TBuJYKw3QYj+gNcz>68kiMZ=AcRh<2 zd#BKKc-vjNzQa)-U46#e77BiUvse$Kk;>}vdyeST%B}#+!3nSqA68@Lhz`1ZBXRbpY>_Ydq$F&o@aHg$H+^cJJ_+pn{0n<#1d>Qh@L27?1hfZZ^18dEC z&1tZmc`TH8h_olk^BTDVL@DMX4{)+Py;oZul_d{ByPyw{`3rnlRA-Ig`)9dl`Xd5! z!D&_7i)9w*N4;K1t9Zm{lyUZAaS0MIs-?B%%MU@0vEU!4x6||1guZZhEJnM`Sjc40 zIlEmVpI4s-BipTR(7NGykpcMoEqqZjNbSS6)md- zH*@BK{LuDCV%Td=*-s8f=Eu14k9n%tbE`n#NoB5`Kh9*vJyAS-z>0-AA8bgA{#ZZ7 zkCEO3SF;qcpWw&k*AwQ^pw1J6QDE_U&P1;>6xm6rLzcpisB}-3WC)=OYKo|m%yY@l zjl!mFC+?tY7=9gXZfS-um#i9P=8XZpp755f*rl z`RFL22eQ!_Ag?ix69;!$u|pm0z910C^h}pksx~*!k42@3dtES=aUsK-hDM%g0HNKV zkstQ|`|61E-;IRWU%=}J+KMs8QTOqgBR)e(+AJzSq01Svo^EI`EIdwvePa7I&PXk_ z(!mx$*Oc~^lhJg)!lxF~(BfVuXzXK0bUuy?JoaG7vJNq>(17QV3<@KROJ zmszrxBKLI>HgaFzXG?BDyaAsZ%lNH>q`E1^8T_cL>)Tj9{%-1&I&L1&Kjdws=;wzt zF~d*6Cm%fC>Ca!x4|!ogUb_wEa~FNU%>{JcAOc@ACL+7}u!AO;gD$x^z4?$vXQ;lD zC-E!!)2p%6fu?3EU(zx@GrTF@VL!XuzRKxN2BIag3j z_5UXqS*-mr?p9E*fg|>AySDQd;{kk$bq4w~$}&$Z#|TL?wx4M}SXjJ0Eie%w<#o7@Y9 zn!|$JiaK|f1k-SijB^bh9TcVPSpSsSxTfqa(lkr${p`T$&h?V6KCg}4W>u%1$Fpg{ zF;+xe&>msLptU||?Y*a@@2%wJ%E*zKP}(NB%R98w26PT`-`~l!8&AGy62@4j8=zFg zQf?~XYttFiJvtUHrj%@5@K1qT(l?Smh+N`Vv3RPPdQoPadeu{R!0Lj_53K2c6@;?0 zjLiVi+7hJ~ zbdHk!!KmiA%X?SHms!%srEbZU3P)j3_eYqST{5?FMx)Bjxzq-!KVe+$&wuk2k&v!r zXv`d>;eOFHe{&tp_d`?13x;Lq7T<2z-?~Srq%TXcwcaGT_I!0N_3uwEIG)Z_>fQB0 zvBr_n<)vB8=f_bm7mO|amy^?aQanlZs1MTls52Qc#VM9-F--#@OPKB^9K*Cvs8ZpB zC|{-kxl*Ppk<3g8oHhylO}&g1WM|F|N{FA$YZ}5!oaCk~XPRY<$F4$}GtUVcpk8^U z>NRx?EwUxHmdi=C{M`RJcDP%%6z47&Hog1!TMKU_TpdS6RgyB*#-?1@*~WX@bvK`S z0^_oqAI&T|#h0%@ZyTpp=8)I9pVw3xehOq$nm2V15g=DIr4sIM0&n?t+utN(KEEU( z2iwxwZCmsxr4;HW1$)LG<@%Q` zfAQ9k(8FpEhoa$9>xmX+wc1vym@YpOae3+txXZEjyOO8V*pqCFN~RYh*~8_zrmI)` z_GRnt`Igkcs}B!!*uB$JA>pQaBiZ6M*sbNoxyd0}%O4-GEu^dReg!iLU%AwT`xT4| zb(BJO_UFyc?tW8y)0d=IST~QnPgMfzWl?cKvXpgF-6xL88{O)Y4SPz#daj&#D=)me zz4~iN|H?5V1`0>>n4rOQH4)R2z3cN0y$l4gv+{2FL*2_r4%xxlm}a5fo3Ag^rSeL` z>eCGE7oYNyuu3NO?yM#f1nV8&sGZPB)c}>Z0+liS}0)vPYr~gM< z`%4B&;In7ub?dB&{)Fyg?0$=nD0fp~JKkwB#P`ay^vGeY)Yql!zKOl`?vK<&6r8Oh z5u(?iE;3QVdZ~FL@Fa&5pA%;L1LW;*C{r<-Ly%p0$FP#L)>noct{YI+3Fe@jLktkq zlE%{sL?&m2bn&hd3=QEvhU)$JUHUFp*(jt&w zrt0|ZYx}Z8fwDi>3vCS>!B{2l5cVsrA=^u4SM0X$<}$oZ481+7V?n_+*6T7{jvI_? z(uo&)%OQ;we!EjtBIe|5fBs^@JIIXt`TlHd*mn2gqE}*O`t^@O*Y|?Td&i!aQ|aO# zP>kyey*CzQ6%gh(kYVR2MzyRMpPe0fRGgBmM{;?v+*zu6zc5saNl{RCvs7mZB|%3z ze;dqxqK|rv^*Jc7$4Nza-$G+l#_)fV(if}zErx+&xC8V4A)cfBn`dK|(uWR=rFyZV zAa+cuYFg9JqZL7c-Bj1UmM$qUs)r(m)oZy?l`>>6p)cZ|#xr|z2#nWSo=@p4)fe=e z`RdkjD}TPt!%ENo=DMstDncUOIfGD{V|_>%MLb##zT~-lsGM}axOdq)wRL^wnK^dN zpn@g>YczR@b%%2DU9G@GP`MN?msNtI9DgoMS8Mdw3VYHUgrU2lgo$B1)sBMJdtK_O z<%{SpK^^;=TRjsIt4$5F-*)D3H|V^7u^8^$6KegrP7)o+9lbAb-IgbyDyhOycRZtW zdw!ewot`w!5RTQkx3qt(4!cC09Q46*sV5v3=ZK=^J{YQ_T=%S^7tOqsEj7l5O+1nx z)#a4)qWMBrel9JHNz2T&KeH=D@FN8lHV46fsf9Aagc|gtuiA2WwR(Q5%91kp-sN(v zkk=xDmCG6XYj4)pcKD#&H}?_$K}c8UV0ICtkoSO9RN;a9h2icvnae{e=1eVESbE|o zOy0wp@l!M0w$(6^QBuC?uJr>Ry)K!rh0^C1b z;Fj(8N(@Y2=N7+g5~jmuXwqVnDPwetcTLVY*XXI(hxUCkP3C)d!QUi?(pCbbiI>;B z`@I+i?rhHN*UK&DlE!gvo7hQrJP=ZlP$!Oo7U;{)uXww2_ML*b6SnCYlM~?d5m{3k zXeq3acWe__x%W@y{>e+Y= zDPo)@)IY=1eJ_-ah=pmyw2W<%62x6>j}7ao=c6YTj83SrJYQWT|0%zFqbxd?F!=I# zLC(()+&%-&`5%KCr+4aQulk|VbJa03RFfmJ7uqUJm`mCWItMA3v3EX}!u(usXJ1ys z^;R|MJnNw$US?JlFgZRxNFi4fUY*5%@_0af+g`);p@e#q1~yboHTF&9q_v7|@|;=3 zhHnHigXPK(2H5M~UA>Xyj<9KIy` z-8+a)PV~a0@1(wp1>8M#W-IqZErPDfVq+UYJfqB~FBKn6%8@6Wlyftb@EX?ksen2u zN-m8XnhiunMvGY0v920A9L7eAxE-cHeAgJ@_~;oVK|Av-R+J)lJ-H)o&W7UUgv|_#!h7nCPHfeTodHW`-zj z(tLiY3oxue(9y_ne;$f}5bZ&|F<&JeqeTSf@ zpg1YxoN-scyA1NJLPgmYKXBJksqN+#&;4m6$yu=;>$g=iB)eQbDrHGM$}b{)XZuQ7 z_VC$VqDR-;mAmdF{jawK35hcucJNC?7K>gU{?+DJq+rG%InVek#rfL}eX>^;5=J`Y zonCZ@-~Bvx_qxLJ6w$G3Y?$YTTOOO;VN6Ib>mAl7^LsG9AMH}eSr-(E)V5W3E1N%T zVQ*{P2rE5#Uzt>r^GHj*Dhm=e7xJAyeO^5Eu0TKHg0^JFDR@?<3)R&OgKhU9mU~Kz zr#ig^0|mOu-LQpq!@gX$FX)r23KaN!j}!OCMoPFhY1zu$K?0k4+kDf+f8zO6c{i*j zuFCD){DyS$3Be|??&kzzI<9EWj0NM@sp=?=u~*nmX+Jq6!Wc_lp#)tt&GjeXHbrdi1=-HkhO>oJc(=G(%c<&?IqYLr=U)tIzvZ0UXr z)Sd$ytT*zhlBns?cGjgot(g<~3yr9(Z#ma9=BT7-H5Yl);!RSh~Mq~%CdDF~Fn2)*)&wEsAh-+dgf^qEY z8c}yGXEroa-uR_~N6}^)({jN5v;DNh;c3MPt~-r3mW`GJa|~C5_;Dx3+!>-zs*+5h zPx$9TGhSc2Ay&!#!k`W@qqMe_ve?MiU!sD|94~JP+PTF^6?^!aI%j2IQ-BAWd$|-} zrP89Tx1c4dF(YxKQn^0k{AOLzAcB);L%CkZroU%CZu9zVFxqkROzpJ5$&(OmeN;Qi!L{UvvvkMzTFvpEj;CLk8yONMWYr4)qE zV#8e7J4}=sj@hSk!o+r_m9@83{VuoH*q0zwIWHZs-aa@h9&ce28yX;m$R3SW4NlJY zf1TPe^nBWQwR7!JaZLgA+`vRdL^7hv+0UU%um_Tr+s1c#^rdiY*t*?8z3`SWk4yIH zMD;LEytCrGz=d8^N0y7hp?m|q798Kt=z8wj1QBN)jigpenD(AryL{!aJ8Y6Q*+AKk zFB-9L9>iibKLK4W_50!k4|2b}?R+nMeidO44Yk~u$$2ffUw^2;+3Uup{bn>8EZErX zTZ&?9zW~Ea5DFIPf8T3+&_LU#MnJH`E^?EvxjpQ-WZ*yv0HGiS0=)e8pP$0pA%t*t z*jXf*XrSt3!mVQfa6%RUIR8Tdeiq*5q9WX8hn*yRW{0sIk($@ZN6_Q}0F;>$fd4_- z#dt)TGR{aV_P0=1ziQ29gAAb30KoCbuH(etyUr1h5klaw6SQP`4y98_7y=#+W2KmC z`u+ZU6Fs35e19Z_^0B1~j!yt^?F;lTA>5w-mY0SD#>zv6x{-+K{!R-3Msfgv{DX5# z283V-hp`ZhIbiHZu;Po_LV*wfNTvAORttrMdmJ#aBdU>1z}O&J7AUK@IV59DKN$?6N2X0B4mUe;Gq*gW!&U2_HohwQ1_( z-_ZoMxS+`Y6`=orvo3HED7az5N6BQaw+>I#1ppk90{AnSt`i{KU?{C1p$z}+ z*U}8{ig#e76bb*GRuZnz-*$S!4P!lusx(3qJK3iNV6O815d$b6LMRe;nsC4kJALHV z|0(OA*^2gs5_ncwg*JL0015zYbbq6__>s{ij%0{)vdYrL0f34k^skux8A#|x z!o-iLPJc73ivXo$1F=s3A!!8YA0F75BO&))ER&a)0N{)z)n6&9L{0fycYhw($s^i7 XuHycIcy;q%+EyMIf=ZMF2EP3-4?>Di delta 314036 zcmY(q2RIyG*fy?(6>at2Nsti261}b7BGICUL@z<~GFoDZPKeG*LJ%Ta1dBwJ=+Ui` zD699nSibRlzwiIQ-s@U3LVZqR0&;@`;hWW50atdeK-qm-bpcFyVSb<^sfbgMko3NC(2;C%NL zU3}2;ani)37USH2peSNy`4TD6|NqTcyT^f2vcp~r5JA%{FzEu2RKKkQEXALa;{!|xyx z8-WMA^%*oe1aCs9=o#H_J$h+_9e{2jF zuRhrR5Fn@Te8GM%m}T)BVNv&qrtm}4B+mWZpQ_qD!fC@f^I@?ZCN=2&N8?QxBdhIl z`vZH^%stK$>^9W%#2|BDqi-s{|4+}@=f@ad=jdORg7)pv+1`@$Yf*o9XmO^xPmc4& z45r4%=9f{}7YG}X62Ka@U9R)kba3!FyJM`7aZ0sw#`~^MMnG&fgNCubcowOzQ84ay z!p8o*O$+{x|BAP@@zKAR!-mZrIcJA@K*%wwRz^Ovd?z!M)vek2@=uNM3aeP-ck9{t z*^rF&H%4i$_A?nrkDq9i`_T4e#T7Ssm&9B$;B3Z?jq(ii9&;?LV%GR&OpXF4;GV5E z`g$)FS~nadV1OXi@CcA1XmjW%dxcxvA1p1OZ(1$%T8g7T`t_&1LTaOqa`DWgNpyJE zqdRA7f8^(4$@7;d|1On*Er;sAZX7kt23aWc;+9|i!cRQ|7xou_{GQIW48>^iq~_A^ z_ZoTqA{$tWjHP^L88<`NOt^(Jsw=d;zw)b`Tm0973L!8~s6bp%RHFZiiE@njPk+(k z;-^)L*tDpW)pFZ`A)CHO;zs!n%>Kl9uC-UoJuke$yPraM$%)1_(cf3#Mv$OltK>eu zcRrn#7)Tq$W$aev1NFCw&+}QhyXaqrZvbS!h68T26lKbZ8Lsub%#QiHaREP;Qaf0{1yP&BM!Ef7jeVdeLO89qB8PAoR=5U`2TuI`-s~VoGt@y5(Ek(^& zxGzcI>59j;r2fM@L{MW}uJF=}5`6ripYg8@2noWA$_rwnMT77RvA5aqxeokP1=OAa zbA+WH;Eno+2J1iAmqZ$jR=u}wvwWE2sB zhurt4!w)KE*ZG&ogU2){9!CH*9^!{^`Rv51;{VTr*W{@XY<(>nrBD?D)O?Q-w81+@A8vy1ns!a+!3 zi)`d_-#{2Hl1S@il#_X*5gl96dEv0B(?H;l%gd_PYV6c-V71`yWsjEGzWTu?&fc$x zFdKu+^3~%tug4b%yReR=KR*ptJbG*Iu2bCZwW1~!`Rdiz#gq5uRLc31+P)G9TV!)@ z6mGZ@%=cp~Uv;m!ysQtH_V8OiUj87!%U{FOOV4>HOCc#u*J1HO`c9{iAy4o?e&4*a z5d(muCCwGKd9&tcQ8~`~b3ypK;KY1i7vtfFnj;;rV^m;Sw|YablVKNVLtn^X9ttr)1c8<|`#e2WIkk1^eWHZ>FQ#aksP(P76Zbi;~ z-P#ChxMM<{BZsP9amRk2skWJu+F%b3#f`0(Czw=BE*hAiGjZOs@+bvd)Dyz1-zLNk z1KAaIAGv*eeSDugv02XLkGk32@%9c5l4@<0eV)l!6IgTDBH+LCyxlqzFjziLXsMX* z3#7Vb>W@C@Umvh+|95+!>`Fvx-umXTeam^;TY865d3T*fGS4w7b+K}PquY1;mFKt0 zYq+*-=LyXYoJ${jAPTr{NjuVE+K^_Y;-5F)=;lhVA5N zxPo0(hH->xBOhoZQxNL+0hTN(XNlj)lsI)6mgRmK&t(PAd7a~0k%B%!nZUZesqH}| z@Np8t`Rj`5mkHFo^kva2ZDI3LCa(SuV%($WW}9Jjziw4nyr^iFX77SLsE)zA69Dp9f_%@pGdoO*~8cbd5xk zl5u=gO($JgVBY+XP}~mkwDe

+j-<%OOcFcZ;B)&_A^wKW^b!o%9b&e7Dh6EXYwf zcD?)jkxlQ<2Z;w2CO$u2B{^k1dEcPXYm}lHm(sx<373=qs!F5Alh5%FYGAMlHK5vo z#vXM{bDJ52$^#TUVhe6u_VM4+;@Ef->vowQco2yHP0VQ{55PeC!U>5diD$%0sVJab zTRB;paeLkKSF$cXN6 zQ|@tMZhaRhb$y~TWp*#(5M?W*ss+O2a07A1U25^eU<6LIKS75Oxg2#41sQGzr zpm;^4D43R*xOpbI2Fm#y3fZOB#JIk`(KO~5&?NS%Fk}!%G&S<^QyV17I{(({7*T!Z z9WQXRCxB_KOc#>Em-_k%EBrA6c(e@F0$05Su6mApPOAwm3HirOye9{j={PWSjOsfu z^nU~_V@vHnBLu`C4#~0}zu)}r;C`pP&E#}1lAUmCnY~LXIIv4>$lA|KvXqLw+m2Yd z!U`jf=meKnc)JUMg#J5RV&jd3{}Cl9)8!ndLy{5~5(HH!k8SeGxUoOXJBJJ{9+7nP zM+~$#xevJqa1hAQ4VEjJE(Y?fM$7Hom<7^S_6isGkwh<@t)E2<47^bvq6nfUm(jep zt~{~!{N~W7ps5=#8?4m{*sC*tDKTz6SBMV?n$f~}%yP$;#B?t)rSSb(lg?zGnu}FE zm$@>u(L7Flc_lqm^CwhfjCBNe_>fBfWb0*>!2rpju9#@dPz{;<&X72bwCQloWZMOx zJ{WSCt2vl)D5pL6<#48HutK+g!n&c>vl*J^uPCx+_HnUbfca&9kq>Rw;40gLWT`bv zofSu!5?K#x_CnV#rIsRBI;#n`YiX5*QI1)D*C&+!RzHGkQ=(EnVb>p=!%>XU4u_7~ z?x=|}t?v<^seI4myDKwVLwVTv(i6}P=vJaq7;PA7QIO|^8s3+PA@378Y*roAJhW7M zmRW>#x5X5%z=P`FuNVfs{;)FF;_#e9eKjk@De=TWyOnXsll-uW2$!MU3M6~pI+X2g zLzCn3Ra^0gchr|GXmJX#-H&RmQNx~&qrt2=b*aNjjn*5fJ28hji*2&}IG|n&74yfl zlyIlA!$KH`l0Ceo+saEapFjA4p!H|2kz!xR9F@5Ln?>x=!Z9i%ZRwbii?{2{hhJkH zQLm_ig)oT7{TunU`LzBEo$GoAa&|s0Baj3B#c3_}@?_ySNmj>PmbY9^?LE64d%4=9 zbAWSIS1#}Nn|oa+HNP%;`v49t-`Pjmoe$;U>6)Z_&V%MQB9)BCC8FCE9|8%~2>EVj zIVumsT#JgF0;u)4j-YqVkKmm127t}X%;4vMc8i!+ z>eg^x^uAvZW}SOZZ3kRA#T0Kt+l?7AL@wlHtwQoGt<4SS-7#M%?!GX}LCXCt{_*(6 z@!m5(m%#E0VR@C6cm5f#laqc_(9Dm*pr7s!JdDSWc7(^@_*P(mq43P}b61Y^7`eo+ zQ`k4OD)+2;JF5*9t0z@@fFhfNF+>i04dpDmStl&-{7oWAQ(qcLwvi|?R&as)KR5iR zLV+h!cGmxEuVb7o3*WU+*6EJ}ReO4aIw3tx_s?sv)Feh$A%_5@*i5a?V8> z`{L%FnJQ5(oyG4#H~%+NA@@B+G8<@Ppzlf(7om}A=b>uG;qIyRjx~nK$_@AkR{WE0 z@&`6DYxfh1UWOw8zT5B5aldC5Hq9peZf{NJ!P^-qc?91g2&GqgH*43bH!q%L{kxe; zFz~+h#3zIvsTW!kt;=UuK=9%IZPnVrM(?DLTYa(vY}oe?t*(-w0@DUtZ8TadtY$9j zZgjMdR8d}jZ0G)b^c74{>bUja7k>LF5B%(+A^BW;o$ikg01-6*Q83$&w~_J;Ls3w; z(HX-R)KI+J?A!8VtX7ax#&WdnJfle74PBa5?}Qby0f2hnuwSBXPQ4~n^^@l;%EIrG zESbn4Ho$c$pU zL7l0~c7qgn-(odLBJDlvzhfY#Y}-cd_v%&?_76(yS;8}>6!-Q=&~qU(Ena&fzD^oECSCzC8bF~LxIm1pj6t5Nm+=yq`*=$wV z)yDiKrYh|Gr1h$*^=#Il_0$Hym9(BU*<38oU-kpwT~)1`U7VbN<>hJtZi62?GLJii zgk6m70B33n-ni#7VOhO4D~I<6_Y|?28t0i^|M&oG)BI(DB5rHvs(&80P!M*oakWu! znbeBg@(jBIzx%0paoA*2TXSi&<9G2jZ+Qm@9ILt9zdS!1xrZL}#+{!vEVeE)ww?oP zSC<8|oEPObxJ3it3_X9jy%UDZdHPEcw=jRTJ#iIyQE>J5@`K{l5jf<^)v^>In}GXO za518YJ4^x&sIIoU=5gz-muFH}SjMaMhSsZM;CS%rqUv(N;BwLUYQ*?zwLtL?D36^> zOvyZMcjfBzoU>A~vi0=ey|6Q2ET9v({C9<2^KZrdYq&byn7_I#X+8f%1?)>*9sZoZ zI`+RhEuX*Iy?5E`8HPLOyxilwDmfWW@(DX@;=IJP;&xB>Vt~C&;H>I$wg9)I*qnG# z5O&%W0hn2zE4N6-V;in6=P%JuI~A|qv|j90-)aH&4KDWwFMrxxc>-7e2E$I@00*Xk z{AHaYcCYK@#oE0@Mg3)_tE@O|(w_^BuIE>VVV8ytSF0h>J(tBB*oHEk#xk~n@;qt% zAjw<&stppp7e9{pu45^>ah1^hPaLVtRe@Nzr~7BI@S8o zSu)?pCri^Vm4%;hn?M&Xxx9XF-ar-MWZsmtQGF%^n_oMVh*k=&%ue*qM>cvKusNcA zccxWiohr}St^&1sC#DoBxXT(lIh*D(5-abxJ0~MB%`wBC!P-Jtk%HIIvGjkrXUUS6 zCOSG%M6i=DjV2!r3F_ZYP2QnJD-b9M1WwLSEkq@SSLt}T1E(>kXS_ot&(S6Phih@k zrQC3dJ2b`a(TI;LGM7I?ln^c^`NTG~JlV1(PYE_2t30H&i-CR-?iAqu8}*JXI=sq$ zfSMqb#k;9NoMKVa<3x-y@#B38ZlvG@q ziCw*|9$Fk9eve8;M3ewUDcuD*be=kP?sli;HUwqiMjVWW8211E`VWc&^;-VYz3QKc zNxxAs(g3v2;q<;#l^tB-)6Ak`mH&2DUcu{RHVYXcrK(0+&JZG4*gzL#8iOfL52sRT z7DJ+}sX5O{Vx8*6ej}VVb;qVU!IQvZNE^as91vIx?T5I86x@%j$4)*a3W3_CQxCt( zvg*D8is#Hx)<8nIF1y-0U29Exz5DT(f&A}zcN5#S9_?2Ych0z~m^2X+Ixz@-Kx+wd z&qqsBp|ij}qtmOZi5DxpcfD#@_K5YL1FH#mMl$)_C;P3;st?L45)+8e>M)g|dKtjw zDJsiddx*sM!EN?F678XhA_LNP1&VAj{%102L2f6^WW`lQL?Rh41l- zWbxiYhw zqZjJ>S$X`;$Imh>FtewC;iA3c(x0*rdzrw`H*Ry63EFs0Fz>pG=|bwe;(hkZ2YlHY zF3Qq=pGx(+ES4I7WP8(0B|C5{k0@KM@-yaUc6m>bBc-R`jUI%P_S=?eqr_)nV?{)0 zAETOeInQfz5B$&Ezv_Q*G!!d$(l#nygT=sWeAHr{9%agp0@Bq|vd_{>F{v+f`RQwD zHAr35YbFvo`EAjNpc^ zoKU3Xr{U1Cif@#tTW|@zlKi2P=)zkal-#x!@rEjGBw~yZe4DOZUZOLJCBKF(>AvkU ze&bjtxA=T#;N6+CZpZlpTe!q~p#iC_Ax0gO+) zKD~5a5lljT|e`Z8ToZ*rdkjj4SCPoc3ofope9DG9`}E)Ehm znc0Kie^5r!zG<8~iZ;o~FPkTSLp>C)ru2P4MS>F_?NXpqpzd}KIV~K(25fYYaN^rc zh|MV@E_S4XD(LeHoXd8OP$b`sO-5O_%FtxvrqU43I0orzF(Hr)=3eu2Z9M85b2 zz;JcN=&Iw}NBC`0@i$~6P-I$4;|(J*MghbA85b9k4N$2Zp4+p?7l6}-xFk0Ar(~&< zPD>Vl&FhooUnR`+0k>vjcBj~~V}f&7A@UVxUlHZ~ zKhRWrzHw# z>1C;GJg89f&33a-iD0O0QP8!0{|Py3n*cragcv0RoafX#t=Xq=m=7?QsR>@(K8U$s zpx>b6l~%U{pN1xs%f=VFUq7k-bct5UyrC+j!>M-blV(^wcN!MOGd!p| z{aE8ketpU7WNECK#51c0YW+M#@}Nog%sITXc!aEfZbg1BeV2cTgVi(0T5h7+NoM}7 zfBBBq`-@ZwlgAF3x7YYTFE#aWSXDc=9>B%}J$std-wRXsi+!~^c4&5}U_J1ihl^*w zO$td}5#`C2W4q&udiidaL>q1&A{yc{@Kqd{?X&GFzqIM#t3&EyE}2HoYRpiwT5{LQ zp4?LQO**3Unf(x`(`g9@Y5uGa0iYe;96I2;w z@!=v3g478;scVmYOu$%mHwn|5*8^IXWR1T6aSn7eUK%BDuMdWp{TQ0Vi0k+_p`b1p zp&*P_5H2z>jfR6U(^*4$KGv-k)a-Y|edpoO;dcls&^lqo2f&}6vvlZa^dvWtJDHd^ zHfcx*pJD+H!g4Z)1?|E9X$75Cobr%ZV7YnxvYCg;Mn};^lY(|&5cNRC`=<}(a z1|d}b$LA;v8T&WuZ|jIRmhvepY`oSoSqBuqzD}QqQxETYZFjvyEnnm-B2k20$RjfyPeE@iHi>Nk&Qs4uf7Vbd$35uAG56S#*^6Ld+%!cewM(M3kla(bmULx4q ze*IC?gg=*ls6uR=g;TvfQ{kYMz!%>y$Y2ajjno-(*oQyhV&=ikM~%X@e|T?!tIW1^v9$NT(U> zUOH><;&bojDi#hiGrIh+bel2>iNBA`cC0z#R$ycreh?sO0dUfEK33tX)Y)a_PA&lx z%JIC$_X@G@@lK(^VYaswY>C#LV(S=5M>mE_;tL&EWnqU&+`)QGfQedJmqcN*`4Jcq zcG=VmO~%aTlM6A~6z;mkMD7QT{h;Y};B!NZVTp>Gwr=q(Dz@Z__0$AnETKw}4vRw= zcPS~DRRQ2UW1yg&8?sIe3f0o0r~RzQ>JJ(iTo!mjEvkZXX8$rbDy(`Lx?6^lFGgW>qdL@?8O(bcy!aA*lENIbU#`?pN32tbpUR&&-XN z&22d}Zfp%HMu%hOI?*kki%%pgcc2q@RJPqOXSe~A=oz$Ji)wzQvBfBqV2{C_m#Fja zDxr$4JY%RHq>n17`>~2G#~;-J>c~3(97Xx18S}c(6v##+w7C8(n1UC0a2bGRYWEUZ zlH`8p!)-u{-`_G@-uTn3^)5o}%z3>!FKvD>kvZ$}=+D8ovfRUxLlyLs>>I2!W;wG( z03>2Eb_=@@ghFgjkY)43wr6Q*4r)JI<%=L;OVWQ%lOIw+V(V^7M0aFE>Zxg5@12Gx zGs(hUwXmot`D`xgk#+((6QTs!wH8vH56rNSM?9(=Qp{A5^GvaILdR6RVwGUR3~v8f zda~JKF%?s+z1HCo=kLa(jt8fmBWIT)s>epIbNzzr=S}2KddUY*zh6hNV-$z+*7@fx z?=8XT_rl70K8^hdm)|G7R{p^-FyrAM2)VO4gMZ&u3A9$=-sdma7aKw9aG$*Ss(Uf$ zMX>bvuvT%)1wyS?{{5WZofj@~U|sHia_0>6^D}CWdBYRY&k)dgP#rtF^z;1R_ISEa zCHTC~Z712N%IjH93LFS*^va<|4A(SD|LUWjJ)z1@ZMC6}>wT=wMOnG-LeGo*q^I8R zZJb#W?*y>DKYEie0Y!SfsIYn6>>jPO3Fm|o;Cx;^;39%eqf7U^9@evf?!!KYy42Xz z>wr+b)+E%69jA_P+1_Ey0Tsh3w5iqRb>wU4a4zorhR~!sWV8d+0Hdg^qZ(<)?s@~A z)e-tVekVwT<+}nJ(M3t#WHSDyI%Zzz1b-9Y%fMSYg)tzt|59z61D2MboY(3((xI}Q z#pv&kRc6IZNcz8i_HYg9_vr6{xYUQ0TeOaSo?jpL^xbIqeq=Fw_L;b~?!D}N&~y{| zpZGsRx<|LYqX%s)KB0XgUdh9>fGl2V_7nFCB;w3O)q|G6xArxQ3S@Kx%-=d+IRUKP zqL8hmRxJ^GCx5i5tc)yY0_ zw+w1YgeKAi46t{lR=sYP!hFFV;hv3aGXwwlrRjDUu#M$xO$;*_pW9m}R2K9TR4d|}A zPj)tZDxqXzE@ft*l^qF#Y3FD%C}UC3Oi7g!O!!7m&Fese`R-lGp)hwhaGT3T_rRz( zx?Y&Zov^=Q!;s2Gl_~a|`v`(l)r`*@%0CP7c-Gl|@p77>_7NYk(fDuyqX*8ql_Wezm6_GL|5yC3niXho-j2Lg(K%M6z;@rLYz%Rn!Rsk zgzCOaZYk9Y2~<`M_NMe7;U8VltPoZ$Sf;G{yogw+85jEA=uxOp@aPWTAZY-7U}MJ} z2o(6GtsfdNjc+VxPj^g$k2K@|xgw2kXy|?4Ur7}DS!m^{N470jeRJ-w8OL^|Lk|QE zfgKg`4SXnnds)?eqF)5ngZ_0(q43V%N_cWVO^FHMdqF93g!pp20sixe3C2Agm2Zx3 zr~pi_l4ffor&q3Dp<1>>1>Se@%!l>{Kwv2MT#&jPTDp)`vhYAt$%x2?eNYP(m-4Nx z?lDn$A}j!#LAxvPyX7@$iLDY{4#zVkI)^y>J8Xnyr{Bko9}pvdn1Tmm)DJPJ#kMOc z;cydbkQpJ*R7|8CpK5E|wbX}yI{93Q?iQ0}0WFuXO&Stv3V}b3oW27^*u4c%wqp(* zf}!FI;A-RKzx9~g8^_ZSfs-_>JU&(-P)aGoZVM9Hjty_R#}Fy?&c?^%?^c>Z@lpb$ zf={fk95RXq&mAaDzcagr)&g7snRvz_`sB>7l<2;-Y0E;<)O1^W^gT((&SeR-c+%u`x?)%qLKoo!WGBoUkIubd@mq+v||MjPhhNkw9GG;%6Y?T z-{&R~GJt1WD>o?X9K-bRRmi_ZZ2s_cuPs*$@tJ)1{+ztQ`gUNiso_H3{_p+3=u)$` z!5_@Yj&~b^K|McZSvB=1FICA~op2#v`b*Q=(19o5H%DP;$FY47h3C{*MNSm%A4)}o zC(lIJq@d^@nr{ls9^q0<@gd-g-|6&*(cU014Ee->jK(v3XZvk)c7&*O!KZ1^98?#& zXOF;smRD6(M=n>fh5-g*gW%O*=yrmT==u|Ey2u54oVf226<%b`<`V+xNNR=tuuM8J}6sK3AeIKwHf|$DYHCbgEy#cQV~_N zD;uJos5@yqVPCe;S2Bve_%=Q|W$e;eNpj~%_vReuhQZre@%p$HW991J1Ap2Wqi;9r z{ zN^XJO<^)Lp-hrlSlGa3_CXV822_iOXH$D7MLy&+YsI`Nnc;y#& z|I?7z|D_?4p<#159CADTE|C#zmqt_a#hdxmbh8z!dB`eeB~Zq%roz9Zfb$+d{JAVm zh@9Mfavw^MvKE7W-iM_`OnTe+Gb82_aMfA2vlFL}ZH+40@0fwM>AHJUSfeoR-rq>T zpBj{Edq2n5zyQ$htCz)SsIRB*nS*_cZ=u$mRNt#ifaH-Y-geQNt#BRuKIJINCGb0& zyU8l5rlO}F4STTRVC|iecP&B@#Y(H%%zn4nh|=&DQ|yQDvkm9b7UT1eNSyqDOgzJo z7{SD!p$7?g#@!QY=P5H21f&3-n%_Kv7q3EQmT>_B5#H%qMzyPl&l=pN+O@&JZBNu# z4Y?q3ex7t>OOtiOLU?|IU-ci(Fw&5Q3kV)J8Ing|I{DYxl-S|X^@rVy#s5;)bdQ$? z3@_VF2vC%sC&nG2>Yo$$+R6oso~AS`0%)*cAd{Gzy%@IFXUanIGTc1dRQJU^rP z-qt4!7oU5qlX*(R!$-o$yp-t(hdzb5hKHDT&vONCUSuOxpdx>L*W~yQAM&aC5;abv zKt_SOV_o4);@C5;9=L_UrSWR9{mdy3nBE+S z6ns4fOEI74fjRf4K|C0C3AI9woL zX@7kjDv=+Bs&M&5z6R4iTUIc^lE+BWbT|HWRp)9@1>t9w1nB7LWHm#_jQan8E&zzS zNODh>tUTRuwk5Lfa%E~~qJTw1`(8a%g|z3AU0=G-mvn{pTOqVO<~c^t{<~eTEC z)G2sN#S~7(Vt3z31)vBgLIKV}#~S#%L?g5;JgKgA%S^>cyg{Kd)6$-zRwfpT)S4w0 z;&wutePZ88pY@o2pKba|BD(Zr{PL^h#^45GI~60J(T$K2D&7+$ zx)iYV(pyOw-`WJ4;l3u*c`8US=R;(+Bu8*@6$oH0hia1!PfivAMD9Lf+OaO3h^c#w zdn~dgsbRSX4+r8J)H+k=KbbR0p+?Qh0zfR)o(UGJ;Fn=bNQ&gq38F}1he z=ob^A7bUi<>Z+F{($rLTr44K3rVpG&DnyqQ{>-#l)*q?4m@}G8&Y_b0D)C>@eA!ai zt{3@I1Ogw@TKy7fAtG!HAK24N9p-A=VVZ>|YG|;SVLli@Tc%Zt+z~S9>kZ+Osu=;1 zT$fP)euo%|nh7;6x54K1@lC&Fhx|o%SM)ImSe=-r5#AF9a#=qRxwFy^9pw=650luB z`DEL$3&f&0-sjAN=TMf#>=ZU0B8g}O<_-Ky0(7|c5LNzKfeQ}1QyEo7O08$Gvn_or z2$rPPs^D(grGv>O$Wb7xKwSi%_G!vKwj8?{b?X-RFm@r6SKc!s_OPO$%?HP$(238B zUj%4IwKrBj=d=SKI&=*g^gWPjIPx-SNlw`-rpcxFcGpWECF0LrHY{z4$ zb(62Y%cYr$2_$<$)DP@a{|WXaNgM=^Z;7m|Ao7=zyK`ANR{}!^KyK(s*i@jy^iO_Q zE)eC~&*mTIqV5-LJp$>cQgwa0J|H6_u6ROwiE6-Vo_+c@Ggt zyxxQr$?urrlQ~oI7RC-XF0F*_`pTD4!rCYHx5WeX8_Ow&+a((#!krmN>&1}S$EYSM z>`%n>@sVHmWA#G$&kcPm`8Ihn8i@jbqn`gtkX{7K6fT;^(TnQ2H#m#6$x$- z<}VGLfBck%-wB2ej*p!B$fv3^zeuDL1(&ejI^Uk--1*nyDd7N@m@uB3UsMK>H0_<8 zN|{OZ?()WX|F11+PsQkfqulcrmgvJZjfV#ug4biAgG-~QJ`yebO{|UrkCZsDq*Vs1 z4lgKJ+n*U#rg3}iQjfyX+mFLkrBybeJcH7YLR(u>DR(yRe7M_+$AOZMhohJ5RkP%8 zcOIR&DyTEJubeVHCxY$FlKqE`93`YQAFU2zr;jbWfmbqBbD?fJ+yHrO*!gstUn4sV zENnX>D%tjD#$^lsdMI%3&pd0j{xkCvBxGj7T5T5C+Cfh3wpe8STeRhG{a7c=u?K^l z;-*rp%Ye__o7SoQRNp|ie(7d7m^rC)AQ%X<-!tn%hC6|hdsiOcLtLFeJ=W)bsSk2= zPQdibCA|=^KKBd#4UW2b4QDewhr><;7H8F(I|q0gZ~>A0v$w6Y6>Y30R73W94r0>w zQyrhQE@VRyd7|9*a9E3_d@G1Hv`T17RO+-mwqsE#d;|y0SuR0=i)dXLK$fKhfg+Pb z|BiJ|S8Bci`og^^C@-{l)}Rt#ieRD$vxoZxU-r#tUV%hLFx^{im}aesRU_sHh?A~c z9O84AwfCJh=GHu$FKO6#%(~Z*#I7RB=+Q7~N96ObB`tnAk|us*B_S*4R~^mJOqU3t zKu|yHoLRz&&pG34N~J)6$^gSxl_FT=!Z6Za`qdSc9(Dtev;Hmt0Gx~1?`scE65Tel zjM|K`7Kmu<-I5|=ir8C0Q64RBK$G=Tgl18g-$sMku=T^-NX=sABc_$)4y?tfD9wg)Z9 zj)c#$sgYBCzw8QF$bNJZ^8StD?OPMMieO(*aV;twAc@#*Z>5UPdl8a-!_<;2&cJb;Fzm|@>0dlvxW#GS)*;K54XJUT9F520u-h$CSOyD^1JR!Ebyb<+IZ0)&cg83*1b1fBLR#=sNa>qKHebxtf+!4?iXdwx2D z5&Q0|NX}dMDYRlc5#+6?Z9HM|;g}8gp^gXNC<9Lxv12FJ4Wyuh;n{ho1R83#cTdw@ zC>W_fTJQS_Ie`F^>@tu?4#tDAmx1?gfD}H4%E4rs27I0=t?Q&bp|QU>e|~~acx_IS z)$`!X;FuO$Ukwq?!s#J_*mP7CMV7__s%rJgef3D*EQ<#T4y?tYAc|T2vFe@7eX9LX zn~h?kkWj_93p}_35S~0`1A%alBgzgm`-KDISkfhg&5R7dC|8Gwq0@?M12)`DL2x6CrS8AcG7b7^50k;yd0VXpbik%Kpw_TLHAl6@8*Nb*q`FG&>25 zsjwpV+pH_h22YZAD^RY{eVvkKH2Q%V!}}7R6tC@EE1)($%z|(HRNR^V4J?d0L_eO8 zuljW^5IA18GdYXcxaH}SFFje`{Ym%+XRhxv8&r=^rRXJ;U`txn;~rV%!$n5HB9qX@ z(DB)Kz8T3ry^&wbTMU0foXWCVd+ycyXa-khvE+@OLFewQGW4i`LNj}ez=)PXq za>rlktKhdEKw1IYq8oB~AT!YmI%!x}F!K>Wevb7Sy~(9gJJfLEQG!)C@R}>hYUAS0 zHW>(dlmM;$Twlx)3;N^GA&hc;6jq7!?EBcCswk{E>9I5Vcum1C@}r+LOgip|w02gO zz~>AhYCUt7D>j{w=DMzWbqSC&S5S}9SPF4+qv95hbe9*ZIQd?%p7??{klXl*vzyVLRfH*LjBjV1zTMF!x*jE@V@Wt>WX9 zD?@VC!A10v`08@~`Tjcxie%1j6(55rqcOK<(LHXDBNcXiW2g^(1s4Gkj4S_iNldOr zeo4A{QwGSR$eBJ$llhHs0S-UBGkm);6;Q04%1u)xruRVTjUj)j^a`vZ0Zg^rO9nYr zhDgG4?TJF!eJEo)BT$_LAg`m|;{H5QQJz{atLnA&rgS_4^C|XFI=b{$PvG8zadDn( zPUJlndfn2G1tY0IVx~+p ztg;WJ^+&CzaQX9Mf5yJgJQY^a8L$J0U%W>bP-^pB*B#qB9viG_a>2FXG}T+*mg-T! z#T;`J3I|8Hc+67GHmp1%*lKKkO}%R&y=f4e-sXe6mG`wbWm%_rQ@R27q~*QIOQ{bM z!A5prTUvmD07yZFf4p`67+F`ye%$B)6g#MCem-`*tf2*hP+E7xh*LC`d!eO@Sy>M#B{{$7u>x2TSTH{s zsAy&Gy5NTU$o5j+TB71cegapC05x@la`t)B^%hmdsexcEOzbQuM==m=ASiU__Je>; zBuxCEf_O(jH%AJ&iR^EKAath_Nd72hDta; znQg-@D0x`h^0eP03MA>Hz(Nj6 zaxK~dVjJ;DmIehd$M^9~2U%g(20?rqQz^wlu<61D(muIYFBU1b9@+-M{1~5*@6f+g z@5gjMSzElPYNQ*J*v=oD;$$o@Eg3fU5? z&-*9++6@i(ygu$b5Z@7AaMZ&1%4i#n9M$jF7#+w!`PUmhHXsXjc7FDP6r#A}-JQ_4 zE9b1(YcAMFH|$>Pb&rbpxTJSZ2uOqv_XXmDryha15=(K(Tq0*kKcvHV_3<@v@n6Ic z03*f;qbi1we{};o5p7$5@?ZF(U>pfl(@I3!#uKB#ni~S9YyW@Ez4W`k;yGI&;O@Wz z_RIJhAFx2cn)}W;l<)7x9Z)xiN=!j+i^~sWg%QI}AbUtQ4APeaH*CZS8rjd%sYjin zL4qc+t__seY7{80|5xl=9{b+{EdeA<;)iWP{^1=NXvVe!zgQxPe1gI5IW}5od<#Xvo0=9gK^2%Hki4&@O~dv*CL@=E3al!q!l)0 z6Q;_O9n>usRwv<3+J^-v_by2t%tZsA5Tb;jirf-^rp#%$hg$L%r1Mb2*?}ZKf zeUGL~!A_iY(Z3GBwNd}eeJRQbRXH0y&xQ_lDCDsc7&GE+Yj~&*jBs{8+4Gz8@O~a- zLE71F?KA5^8v%{aJK5;C>z8i3nLdK+)`N8Fd#UA6$LEzQM}oN@FKGW@$5MRWHRWHk zGZHl2)0~hT)I=)IeU>XWdg%XTN<<3FPgF4C0lWb4Njoj><$Oc^sqSgq&>Zl@NFT^c zjc^>W@vk;~#>m7a8S*8QO$>)@sSz~3=%+$w69z>qiG<8WSmL#YQd6;j-wsQva4{mO zAl#wrAcureSsgJJu39P88RmqI2N(kEZ*i z0c55vGwRjD0_`hA30T*yIr)-TUPW%Oa>mz+vk{+?(u>{lALo-9%LWc;6v_iiX(JyK z!-%|_mU`XcGz5)S-lejdTn##v9*?vkOOj5>N*)^EZd)S2-QJe~dm%?b=HBZ?y;Xrw zyTYt%<%mayc%;`07^keJk+{(4kqBVZ`_G;v_RLo1(8@e>>6`>iEB45)J#LcBk2tX7 zK#v)yxDWOk>T#<3V?gSigRO@3T@`7BIsN&6eI{b>v3hE%7}nm~IXme==aYg;qH{g9uO51wYOuqR)wWx89(zNqAMV_dzN4`^7aDLxv`@1;PY zVI<$?4U+razczgyVFgJCY-G1HXTF~jop5Ubi~xk%SEU5ngouzsJG$}2n2j@;*Z6yH z!+1Z;3eRIV!ibHy=MUc5Fs^T*xj~fnK=}Ax9y4A!CNpS)T?nK?Rz4GLT;SpVowY}O zn~(LU@8F2{dc_5(YZ-BcYl7@Ww^(UX3jYQj{0Zvj;HgsW&GzzdhdRPrm7&}7Ws!J> zx%;zOr{o~Gy42NpW^diKH#W8rvJGp#8$geJGOl2f*JU_StweYszQ5A3EiRNpoOolq zp%nysDY5GMM(^LQOdD45d{$gO&&4yO!>T_#6v0PM9swZ36o9fyM}VmLUf_fV5BRT1 zuR(Qg)Rc@M98aJVzH7E30|L$=N8CzugW9`o0^E2N`*DkMa}$)s{z>=pz@Nr)#Z|ff zcY@JjFS(TH?!ZH5`9auTr`ewr@7HPTS;M3~Ud5lMtQGr<*lL=tq+AedRRuuIUmUR6 zs2Idwf|3t|f;IcZV4kQ%Z}X63hX?N!=QYk<+34&=TTZ9ctD4S*w=-~_J}&J=P)HI* zfDhODauXkJ=Oj&l@LQP`6J0IE99%RjHk|)%15tCI;Tlf|W=CLr=m8RieKW;sz9mF1)Np63Lj5+MvRjN-W&zhBvb4?)C(fIeXd; zP9T93BsS(IEMI2avpJ1?VXv1hYP(_n|6`z4^<=T-rwkbRS53KR#??9gb8(FTp87g@NFgf?2+~+ zBKWTfL!GTz-xE-Po<-pqTdu?BSBOgOUX{MNL-5k@n`>94Vj{U!j-L`e zwxt_d0n%t=hS$to^(THJ_^X`*YNi+=OWDo~EHIkrEzDW-PxoLZ{FI!i?35*7(od8t z&KQq!;|_5lJ4i%rdJQ%$&tc~;H1lzk7udN+Hf({MM|1xQ5S_{2$3}N^RTcB)fS@dm z6QiF9r#a7bxo3S2+aQrm<7AK*Og=v_kk#kY?A}!`ACLIhyZb<^poW+^6AN^^j)9pX5UE@kqVdRO_5 zkBJWyY{d?d7wV8pqk^*lt^DEFFk;W+9anWD-qtrt*N``uj)uE)gRzb?+R~ONgxxz4 zY}I*(E|>ScT>o-w>9quZ(yjSh>Q#X~`zOQi(D3FrgxYY`vip;m0w0c#4XPqwS08Qc zKd@8Pz3HL|F3}|S;Tp?4Kv|FdIWgGzx+tlbBc}+fcM}KZ3{%6SkKe6QC~z%}y?p#O zL4A8#VSezB9C3!s$v#RyNHG%k%~!Wz;GoGrg=Sc8MK&pOX)mTV5k#8q7xS|4Ap_$* z`Xs@M4E`e2!W{E~;JQ1%`{HG4amfy)o3@eo)xm@2bZqK=qlD%|AFG27wh;kk^nj~G z(RJ+%Q0>b-odA2W3#$&y+B0+hD-OY4FG{a3JbW(6|C8Pz1`qCb?Y9eg+e-w-(rtP0 z%sJ1w#@ldO)-Az$GN`;;-p_aWCyDVR#pbTt;a#5bdZY$fhEjAy7dqrW)d!)gLU(h) zAxRrmH=WS@`$(3l!SEmuLCao~2CBG;V1ea(dk(>}U_I5(@1NWW0)Ds*)n@MYOXi}G zN@I3j_(5vX#(lJ^q$U(5eFH!ssUAu2#j+`=tUiz! z8%@ArJvX8<{KLYt_)!Oom1;P2?V&%O(Che{m~Pi8>wMu2p8XwuYbsDTuSGDLcFg^r3q^M%NM8~P|J z=vAC;25RWzmcwUq2?)9%BdUW9pbhe$c?mZA|D?44lhGyvW`~rWmzUP~^LoqXpN*_+>*i0Yk;CB{QesJfL~Hj_Nwe zGeK1k!~}Jq1+(wKqK~$h2M`um4**<<(;_Q;Bv3M z9ogQ}D*Aw469xaXXQ3eva%nFm9WW#mnXZ6_#rtRgTVyalu`@NV4NR(7=`7;%X+HMF zhHMLA)PZJ2AtO$NlXqB6**Zqub)U}Ov!hgDhJe$ZQ>=(4830X;O&bjd>DI7orU^x| zvktsc73BU=Dg6U}=2b22K?{}4`8=1Xm~cM$Y=8R-0h%JzwC438B)Az^5I%hww<`dku&1{?k4`Q zWNnwfD#=Sq{f`9cnY@Tcbcr3g+x~9!bq8`N|CBGFKkdH9P(E^o1?XR3YTyr&&`RhK z2dRH;8sNxj?qm{GD;Da!nddotwXPk#Wp#a!dE13?fNI}l3QT=WR46pq_D<`fach;NsW?tvJ!(h-^F( zU!@Z9IZpg*lwYKROd+n3HdSEy@aj*mZ!X3YauwfyTfFDC)-%b-RzI!-8+0GR&YDISr zD`2V%GpW*~7f4Mf@^35wS76}TM=yQALXoG@+V0Qk*yvsnydvv68S?gHycx)1Fu!>u zvxsyFOGxwxwdtTW1Z0p5gW?bbC3R{#1IQgfvc<$;$5T}r_j4)73{YA8dU*U`tz(L8 zn&5a5m0m#AX?-jYh9Hhuqg~eJOAkf7oT{J%v<1Ldn5bh*qjDW_YZnAGhyTjeKD4jO zN&B&lho;NkC@0{{U9B&IuavX?m-*K_Qh>a_VMD(KoEu`Ga7!P@%|>2vAJM)0l-D>Y z^Xcc)CAu=0OZSDVmfG9 zHd{s+F0yM#@~s#W!k%448fWZTmgqJhPF@#oETMM651RId8DbH{E%!n7vwf-*MO@(H zr{#(EWL(e*cM)4~B3&5ec@A-PKsP%){cNURuMT6db3BP|`#JOs#uo|SSAz48_wc5w zT@7rmP&lN;Vw}r-jb-iFQ3r(3KwQM)1aSI;`@jXiNhn<^Ry`ya_x_WJ6ZD6kee|!UZX?SRv3&GkF2p%0XoR4SFc(ix9(t&3AXGg<3m!m zbu^zkS-kkkF_(I#tzq2V7iWy(WF)QJ>t)tO<)PMYv7c;~OSx8U4{qGdTRnR;{8PRm zYQ>%$sgFJyP<)gs5~5O9j+Nc8jp79QFJ+j@pCZqb#-$6lT%-2XnlCD?R49%8?!@~? zu|+6W3kwTplP1i!DCp6Rz5TzvWlCTlA$Nk7=4Yf>LcvI#mg(o{&>p znE$qbT|s!FGXh^-_|lvy=6;rshZWfq9jCELj0aNd=Jq7pY{nV`e+6g+ISJ_jkqQh+ z_#s3jyW2)=#vp+L?EY_r05jo9Zf#oY2ZMH?K@^+-IwiI=M3%}&gKdxmx~Yjub7=*P z)mJW0-Xh8fvkaGCq(o|_`so(m`c71JS-tp$0MKd8og?*oLO!nBGEDxDWIr41gHEts zRdXc|0~0|3tt6t10anS8JFn~}Lu1L87Z za;K@swdUsh^aT_N*YcsorXfm%NxirCc)=g)t`=@sU7`8Dt5ROCF(<6IZ2ePv;~27? zsDBu;-;bFN4#$-7MjR_7xqEE{A+xFFctz8Su43GT7A|3`Gjws_Iq@E#O8Tq zU~}=>@lWJeJ~Jdg7DBfded^_%v-Y#J^>Hb$#@&lhAst-wX{rwZ*UpYj>Dr8_PbxHc zHC)wALH+SmCdI8&$RIwkRXHfhd#3_fIX zIQ#WkoQV2M_Xq-e8MJia{BM<{p959fWl)cZKGx{7)4W^J4uN_7QglP@;TI`^PU#8C zF}SasUS1Mt85;~r^ed2sHrlB*Swh|*6P*jqE{ZTmCB@OBBc7BIm9DilpHYjgChV{Y z-5U;SnAJGYj=IVxbR!Tj)$7EtAx}*8*+I88|5Dl#=mU;f08}6j zKvs0n5mpZE#3Xpo(#j!W<^hrwTW7WvI*PM3S?ZJ>%db2$$h7xWjMO+*PtK~CMw0I! z25(OBO(YMU89f4x-)V&|82miYPzGw@@Y=ORmC0AytdNHcRlfli-|GKG5NYcQdUve{ zOr(e`#WIGSNnh4#z>C=k7C_U3Md%g-8k4~p12&)~#o-hN5*+OqLGl=eO;LV;VZ2Q8 zDi1C2e=Z3KKb@tRy?E?o^u`^9q5kXY^(q(~;Oi8iU`cTzoey)kB&mufUTh{Fl{`Tp z=bTZ5WcC_cp#?zw-b~NItfm?!uAy2cB-duA>r((y*4kCk*NyCx#u_iLw*<&TQ#l`?t8VfEq@Ed#W-!O9qSXUjM zjCo^b?o7QdtT8PH`*=Qez`>6x!XBpN>E7X^4=cE6bPKs8phY#O#IqWZ_ux(_th|1V z8-V-nFAopD9&zDjH(i_r+T5Fe@5nMTDFSKJ;c4p+{++J>B*bplupQlV`B*>)u*se} zJlt-6;cfV%MB0Zf4F?*zf((Jgp8NJ%4iGJ)_W?LQ7doUO!St)2{Ua~v{mN%(04>$I z3qUf_ucXJPmq^bBi?_e}p(LAOxC@ZV6^AGz@5FuyCn)EtVW@91J`;3;-awZ&Iig*R z^SXl^3wedph5V^~UQ5;h_Kzdo!GaRa2~EH)3+QO(=gX@x9o#~7{0a_g6hR-3^!y1Z`(%}A4w`9J*RW%4yi%bjD@xPyX_yc9uufvm4oZrlEAOkCM@H0y&Dk~wT+$ZZN zK=z^~Ek#GA<#f2YMZ)x@tM+&SXD=9J-nWE2-1y2hC~l&;s9F*x|K1Mh9;v3{oXHmmUrKZK$tHSd81;=`3O@lRt+G zJ0Fd}24EYU*REu|u2gTXZh>3LknR*J^AfMWa}WM*zOJHo4LS&@Z#hKLzXn&<4yr z7ozImGu07L>j{3_%7FsRXJ}EqyCgTWYiU>N@>z8X(1F=4i>4C!LO>z^k2J*$KpLPQ zt;WLs;T#W%$haurL*$&#h-NdgHZ3$(rgLtGWsh;n5v4NW>y|B z2^5*rOKD|ZCRcQkAPNTEE&;LrRV89vagzZEhb-Ls|54C)0|mWUepK@Z^_M+|*UGg4O3E zx2HtF-4soLmi`0WyXEIIoXcn0wlY1pFjsbdR50Iuba6SpK3m1-u7=s#aSUu`Bri-~DSKo4 zjIQo5T6flQFKVnGGa-7@ZqMiI&uW~cA$;}=|My7B;o48us>=iC$3Qa$dh4`l1)Z63 zz@rPK;L$Q<{yXkK3tPPs$Z;rpLjitCE}`gH{ObvO9Amrxu1~ZR_jB?X8K+Yv06pmGyWv@WMS@^1z;u=jG}2&&^pQ6jl+eTHVED5ZRUbz~8Lo&?rdlfW zOS0@eCq}Hlo6h9|4|0hB$~>TQmtb$*3cZ#4b1f|5!S1g@Zd+{xHICI%%0vv%2m&4! zGPEPt>47wxh;=tRWB|#0WFTRmE~Xna+Nc7sCEm6JcKq zkUPg`iJB<&3tbL`0`q6ep^FOI%ae{CC5?p7<^+X}iXd@iH)NiGq=5!2jD^!OJeyOnZuQ1NU<&{6gW1 zdQhz0rDz?(%leh7p`1u;nR%F^d$US&I}o-7T}9DGG|lj@ZU}tasS%ZYnmEco*5v{?`@7g$vGG^bs->XYvBE29_87i+=9 zNd%7}uYdA%Y^VmjQGV?Ap#wIQ&%e&%)Xzk5EX&IUDI6)2@MfYAc8~rm(oh!A-|4#K z`KDuwG+*e%+#gvY#~Etj9wLdA%Yqno4@}R*BFuJ~5n$}O;i``pHyDWZRox;tBQQt# zzd-se8Hz_t`yr{m+ASs~1aH^>)mB`l%y1t4@3!Kj_G9S6;gzSC;SsMgm|7aAQOuFI z-cd>dCj7fu;w>Qa{x?GJ_+JpcF`~E8PDIfbMnBE_IUYrUUy*j#tu)kX&DyElsD?Y4y(D&I}x4M{GSG*>XhS+ zJM#HTbA1Qk2U_7mObde@qY+TGzPV#s&coa-_*vAmlV~zr=|Tp@WZ0h^rs?ZWO;I<+ zd_9wxstRW%h3Xg+Iy-voS4w-Iq}E(_`Wbzb)4YmEA{$e_=5%K_06~_*bK)RTUjz*k(BpUOSVO`~%E>;zF16!Wdp^tR@|5ld;E_!s5 z$Z_o&ek=Wc?Y+L<25L>)Fec#c<2Pl2Vcgc2gU%SMHaxuxeE{O!-fH7G>uOdddvfnA z+S+gD3+Qc{y-o)@RFEJY$B9nEK>c^U!TgoK0Uri{;S;A_&5t>8iu`pE>fI-gp$aGV z04qmHj_phXmpXk5^GK7u*(^5)EkL#@8@u0aaNDk`NWp$g(SQ#IG@Sp*F7bQ-!mcW0 zc|~NxNe=L}2w#a?eg1VbXV& z=H8Uauh=RV-^|dALKB>#r4AUYs1bSzoodyzoUH1kLF4dMlWezDR!g<4egnQHtwi!* zDWaHjS^e4HfIlf?(WGNzmQP>|Xn#PjuqSJS1d9&6M4P0jCh zjbMnNiD4*hp*3g0A)f?w(eV4XZ($Vrp=?i zj`XSmy7e6;IJId)C-?3dqux8pvF6S#H5On@!OzMTubxTtS$OLY3#oram{SRe;O8l8 zGw50Du>i>_UOSardqC-;<+75V&Lp0~23Tc)u{L1*+}kr5_lvW)_D%;%(`x*{J{FPn z+t>?mz9JA;psfcWyOH7*dql)_j-QOR4qgWYa&_Pcg^DhdBUMlB(xf^9z9GPnO6!9` z79*426&NZAm2*_G^G2=4VUJ|&>L}oN{dT(~SQQ~PaeG@O=^IpA>NNgf+pniAh#(T% zHZYdUW@eN(yXE#*25hfU4#Yc7N=Fd3{46L?R#DLbPGj4j#=e4{gFg_*&t2N210F)_ zK6zK4$s`oD6>-LZc>g*oKc8`5s}rjLBla_h)Wp1~zWv24+n3(24iyEfWUFhyT?KVS zWD(=|Y@(mUuZSY#(JCshJonk4og;LwwzUmkDl(PhXT^l<^#$Flvcyl=R9P!3^pGtO z1K=({3K6ur`TT{-V^jKup={{JMsnU1nVt^L;`w``-BE@_T ziS3!9C#kR@D;i=C>{#4ypA#raVn-q=%-CQ}0eTDQmA}GI1@wP>WV+>;xrD#E)Ds1& z1$J4Q2s&_O)LXX9n_CA6fLH1_BMg}P@IRG03vG6uW&%Y^k-G~`6U{r05MgIKK<(~4 z?qUULuS-$5vZ1cWz9IHIvtyt6V??NZ4@|^Fi+w$ahnOUPqU5+}+FV7>KszP9^o!!*Rylf4$>(1~yK^KAwsFBI(F3|lNM;>+jZ z9cnWH4#Jh}Hju>mee~DUX%p8adbKnxA3$mJblf~jkxQ1qL4C11m#GDb&AvlC&tj$) zNv}~BN-gMuW$g$>{qN3F5$$LxuqH3^6ESEH__Im?an=DtlUff;b*FkZEu&v}N4F|v zqDfPzuL$gxqfuwy1CnLCXt49c7FsTv`?x$976svWo!j5rgB!?wxaOhbsgU1SS7!W*i(G z)wuz^wqBG4U+M%;qc%kC=M^#%GZHJc@|L1^hY`AbW5Y24k1mY&hFPbEuF#QIS)Sc2 zNf}GEihWG@I7TV%OJumQeRlB4J1<3QAFyFt4m-K=myi%2^XWV7QZ0!HmyTI99A%n~3CG`XpoEI3_K)~Tvm-mB7tqI?oX z9fGGNE}b00d}xcUW=JOWiZHdu-D`h2#Dn0b`XQeJ-EO&|`K7=22d%BDQ`ddIojCFK z;f$oKv$L=d?5PpUO_K;0ZAkm-9zq+E{(7UIKF;z5>M)!t?iszsV3upBDWL5K35JTnr$taB6MFml<@72EUdDjEG9@^tOJyMEJRmpK4ufOLM;aC=(!u7dqkX`lw5h z*FU0WI*FTO;}&Ii$_FIY^+~NB+~u4%I!yMKLVi!|UW3#0sT4@A9wd4=s`?&yh{3dw zr-+^|qf7>%MeIISD+4V}wLbaR9uuHQ#+D$DNpDq{VExNe-Y5~frUv%SfB_*ZQ1qNL zWCHZkJ=Xv2XP<6rAb=mrf0|Z)=l`#!RVQ$O3*>yZc*}js!);%|(|puNVEH3aBq(pm z?stC78+gFk^8vdnrZXrNBdQY!-vVs5_n!Qdgq?Y*3*<<0DW z>ZpiLGKv*Kj(Mj*g^xmpO?r-x&-U-?#)DqDir?dvHeI4FP(gTv-Uom}it?sJ)3=H1 zABOOqQ-650(|qc?1D!%AI2Us69{y|wO!j-1ERp-tT!Db|DAo0%n}fz2Zwq6 z-n_7f@@Pq{^hA|EAj#Y{3U-d%&pzu7YkITxW{wZ{CEK=_|5zzo9Siz)I;=ZzuJZ-u zdkTF)W(h^tOp=9b%n~}iUudGDFSJVHBY?&sK!t;Gi$pL~`x%IOQ)`VwAB%T(D)`sz z21b4-vQ=kPtN>f0gfr+UG%*vO4U&HtW<`9Oia$urFA?U~HH}up!fA9Wv5#i1C;U~-HzE-|iGf{_q~Y$|Ds&+`4}TkbR!>o~^_0-vNcWO;gk1bdPp$Gy({5!b)J zzu$$MZcR9OaMu5>er`~TtoePxmRx$gwHdzQ2Shj~5NrBNyr?WSBfX}1D#=TusH`Vr zhwqyu8+O_HY^IL+ZMxl9Y0BmYh-g!Etgjt7hiG)5=hFn(TyS|J5d7T`Uo~Kr67f#^ zT*wM9^IMv{#6RrhZ_|yQfT1XvY4_L52rp*wGN-;z%4XLPg(P!>oBC}p&Hj2D3ch_l zk_qwVpRgfo;|XOzjC4#EGYlQ5gp_^1JNm9(=H92Q4)BrkE#VX-&93s-%yX(Q#*6@S zl;Zg-6csIkmnoc|mOi=zj793`DJFXOo2USdl9_x!l-i0BlKb=SvL8#wm=_$;ak0Ut zSS67n;^nYbtM*iu8F8HFJOfsm%a{j3k2YcEMlV8J!CxMEkER5q%`xI9H(NeLn6RR> zAfmt$0yFwMtVi`D{iV)z_zuf&yo{wg- zBXs5?I5iN4FNx4 zGz^PGHv}pF4}`xnGd}EH;5^20v5G^|JR(--LzyCow+@E;zl@=tnbc;PbmX`#?cD}h z{@OxAR_IIt(5Y<#w z-P}o36Bu{3S8M>4M33(&U+UGj#m>uCQ5>mWDDW+BUTxH3xp@wT{nA*8pScV;Zw|dm z|N20!1xV$8(0S(H|83>_Wc|s9)WngKMzye8PFX*bZaXosuN9Pbiv;DL`gB!^6U{Cr zp8)$g3tVaHse}ROvH(_cZ24^0IZJJeyuK&fArCquD(R^wZdyexD>sFQIOeZdv`D1 z;IN?|Ix5nf+z*9;PWsVS5cyQvvC7^@Tq%yhYk0Hu__1;U<%}{xSj$XI{dEf zHbX)udnTeE<`8_eS~e?Oz{-hHW-ZHnLve>3>G&Pyqv?Mja_5{*&}St*ixT+aD0{if zJC{IaMLzY_9N!z1Er++|8OqIidhZpHSPnmyR8NG24>hfa%h?&Ct9Y8>e^E{e6Bis3AmH9NeJJA3S%0hN;(W*r_1(38W-8>%P>0N`K+wRSpJ7`baDkn8Ls|+ntau;1VnZ zqGbT9pN5}@Gt@cOfr1LRd%?}A&e)Z`mq5BfN z3e-VQQOY;y(miTMIdw0L*<3sc=o9}OCweC`aPAF8YzmLMPS(ned%krd?6RzOk+VSX zendb#XLYdQp4qbk7zU_Ma>ma38hY@JxnOo65XFz7WZj%v;k zueuCbZ=ed`s8PodO_apSsVIOun6~;mQcz&fVC(lXG5kyye(lJ-(|4W6tB_R51RRcO z^3m8UJm+Re4(fpuiEUpoy@n9cgfMuzZK5VY)y# zvuOVW?C{05a{n~}u~J1=bdgSlx*bG2v{ss6;^_t;fWaH0;y}#+BECIJ4z}&)f7^Wd z#fs%69qRwMr$I@Bx9`F~yoZQJ_X>dB`e{7TTuU8jP!e601r2*9j^`RRvX)Lh`1OWk zd3qv4VB2-I5pS~VSBp0Y+|Ni5$!RDT7fog~@WN(E(9hjP+Kj}BB1peAx@xj4bi}eg zBr%Jg>|fXkyAF~KyLzIX5+RK?H7slk*g;uJhKDuoCcKv*__f=8YbcsMyD4+z@Ev%T>_qFgC2wL<3zvEUw4cLhlH>a zE7sNCb-L((bK&2%cc}Rk_xKjr7K5& zq==SJ{PKM19j?R*Scc-AUGg`}DLiNIAqz=`4B~N5CbW0Wt^`(HvEVBJZ493OMkmc87eh&RKFmp?;9jicJ6fJ@vxY%DR-%yZU&NOLJl zLyBxX@!o7A3?)jP-hT4oN|S>$FRYI;>B$_eC+vu4h-yR;yIgI3t6 zYSIqyH1zN+>fJP*YF^hevzEz-__?6MF8E%AX-kR;OdB8v4+O;C31YMEmJjiY7$H6mSKj9%1tIe4!e7*Uv4npfr*#nlLDPY6 zYP7usab0Agyzt7(O#I$sfBW^b63+?BWhkwk2ubY#=;69I}dm_|nBxL4G=< z>X5WhnDs-d$s3p;f{Z?nRxz$!hOp@P38{CcUw);5H{FmW9L!y&afSh_G1qcY@N(Rv z2`Px!ve??ta~N#VxtJ}3`tRlScQpuoRyXkO`PIGFII3gyD+4a&)we<`D&zruU#dva`+XN z#$`nc@|5u-JxL1e{e>`DU-k#OWlMJ~sAQM}-ki6h&Y4JSMUxi%*n0M(Rsw?Ls; z&sRe{HuVY^ z8`wS^&N<}n_F#*uwBst@>>^|{|NHZ42X7~`!FEV1NUIzm?LPBphMl$q25ZuaF#b@A zcb5iEo#V_BREEJ9_&VN!RY7^izAqS^092=&{!y@6OC5Drftk ztgmMHkkSq|@IC2w7PZ1NREQmTO64b5(iHsQ^!*Ut1g`QLE%Y3P!SB!#+|6!McgtZI zlp>`$t5Jij>Jqqax`VM}8R?3Br2^sBV3|BB&*7z^t-plRp-6G9xjScR?ktLk6CBJh z`BvYFe;uSo&Xz76^kcM?^u}++DYF&%H=g#ge7bXDcOZ@Fs;_9Ak+Rin?)P24+y%$y zVrZQ0<1I;@x3!TJGJ~^NJuHo8I&3b1)KqU!l<`|%so5iy64JSZ3L7=$xj>%uuQU~; z3#UF?P##}y8*#o{O@r6X;wuZxJJ_tjNxG`l#)%>BIdN%_^XX>jkPO#djiu65qz7Xi z?s0)xllb)4{!)G4--B^=sDEcF;lWNrJGgz~T6|uH+240>4WR=uk5;6Ija4(VrFWXH zO?Q$$r^1C&jEl2TQh=F;2}2@TPp*K4JZ5=bd+h#bJP$Li968tBj=89q{zV!bc&}+Z zSfE=Z>2A}PdFs{8z!gipZ(}4n&O&fizC~j3%`v<+NCvAv7k{ex3VWq%39Qy!|HpSf zGluf97rdXj`eJt)*5zP)u2a>kSaI-+(G_Rau!AF7X41JoO=?qQ_2e?To8=TPNQxE* zOi;>&NNb3Nd+o6}mp2FSwVq8Bc$?OwfUb=;!+tqf<+x1DFANA&6;;`GDNl z_PT&OU#1TT&8w}Glz!45hO{JB&tH{D?6;|Jta7&-oE}Pk31iXJZQm?~!`NAvv6185 zv!pcVYUAW~m(W$UbAAQj(MTk(>Fv0CGA$|{lDGGM4-~4C6q}<=E&5hMs@oto+0i?( zy5)v#>w$gs(z!FIXF^%+xFy7mrUVb)zXc-HkDs}F9azDwj5F7;<5D+M&|V$B&tsrR z5t_M`Dt3b~;0hvWUtVjLbQ)T$|EfgwnpycNDuE(8<5wC*PT{}Dez|Zb-iz3Lr z9@tCE2R@v5!5Pg*e{W7 z%db#$jHSCy#SPY_DVlZ$8~SW9ui! zcimcg5lFr%Xi!t6hho-pf*1by!yS1!&HJGH*%JfvSOt&li6HGIz=*d4Z|NiEy zWkcrQJqj!DF~V4EQ@Iw^2k_UjvABDc)gz=Ug0*rcc%LiDU*gbB5rH4WTZ|aDRuGO7 zF1%w&gn^&Fx;7V47L2bixau?Rkqp!dtoaU8=++v^!pJM<`cD~?T$yqDIlSnx{g8mi zLJOCh(Uy7N!i(g;9FtcD)3j&vO&uP*8d?0ffPtM#X7xYh^S)^S)kiV6HZp8|n&kfI zuZ!5ZSUkNLBvms!Ub51F4$wF_zMEUwB}sQjwf89MtMn&$j0HR{NiR2$?A7iJHH!JT z6SWyz`YT?b^Odsaz{G62dj^A-xvl|OE0jm++)LGi>a6SI>bTjmH_r-%0)t9lPz|9B zT{B=b3BRAg-wc_$do=~>tnf8awEE*zdXf(q$yXu%=HMo#f~r&O2;11|lH(}Ca4N#D{y9?0gy!F1 z80~r?GAL`q_<52ULz!OS(G)CWQaJYpCSz@$^D@CSpjwZC%Wzmpt04w0!2#A+2l!5g zEHbZ2w~m1Q#<-&C?g@Bk$)UJ*(cA4+-0SSI5p{JpUJdJqY=O5$L*?3E@m*4ddQfs` ziH43VY1Q_n;IjpuYoYekZtnLBnPy!MDtmMO-*3TBP;wwk;0AOpFid!;7A8>B)xa`? z|1=TU!)L)eb$w^ys_db4(r2;O6|BrfF`~;Ijf}`dCuQv_$Dl1*rx_7et1~pSY?q9ceOVCB9L&Oj3y2zQGIxdvAD~ zsg9kqapAhdvr+c)V%q-cu>Tscs9ry1x~bImcs7l;%0mt&m^>IrLw}9i5p;YgMdrC{2Tq4v7(PZwuUuyE0M7|^x z(1Ta|RlRTCo|LN0;}EIw&Yu@Wk;@wOd^0@OWSFR#m`!LAfpu;a9&Err20ngOO#{3mEd5dPh}@Gvs8vBDp~4yX>W_Z?;K>aOgcG|{-LsbHzeR*G2^Db z*{VT=)jHevU{f6a+4@;q%e?ZZh=Ewo6JT~%EREsmg|QJ%9PxoKoCGQq^xniY2@Z7d zF<0ZQ`p>TEWW*)~e=of>tDLAS6`d5^wCoW5LI4oOo}ensl1>;vOxUb{N11-VoGqr2 z>ae%fh{Xk2x+$RJozdcdDa{Xc!R;4U;oYwzvLjS*dY=L+WSx4{3b(m>_$ULV@no|# z<1vmA_L=u& zPV^WO6SJ;RMtJ&l`5QqYffk8V^0&ME7^augG!J*fj$tO0K&bPNxNc6uE9zRrZV5t2 z&bfvE335X}B|OLGFD%FV4L1G~mPJA{F)|dc7CDuluzP(P-z5%LF9E8oQCIVCzi!PK z^6zgDbnrL%NvjtW67Ij%MKOO5x9jwdR|+xf$S6%{mA8{(fzLfo@`DislKc|qf)tnd zVdVTy*zt!{+A&l<Nm$#F7L_Qu$_mkW3JA zL5+TpOcAd9bK=GG6s9iYdWJ{fF|qgteP!DxV6zO)fY+G`QmvCNh){KaKYMtQe*5C( zv`&>^S1y@W#O7N5qR{QY1!wa|CjTkr0o+3gVghg;|=Cn}c-`Oa5sorqdCvwE0uRdar(|T2ZHH${ zotbGJW1;vZ%e{EM#Tu}O>TnGx#r*wzdN5^u9ew7O#}y*7u_^Dby0>xJy6o+zAD6PF zmO&bj2m)GOIm7H|!t8v&-d6N|u6dJ7EV9U+U|3%_ebx`h)tmtZeKm>dyd|}WCj$y& zsA7jZ9|jgKFU9=L@w+&nfZyCUI@Zj&EeY3<4J~M?xgPttf(kC?MedT>q2$X)=Yb98 z`ecG;sf?vO6QRPZ&Z#F9pi8Ygxo^*ap*#GQ_IJ~cVL8!c81?^!U-{H^v%;u!Wpv5J z85Vt|L_dQ}gp1O%z+UWqk+0L>Xh*XvrrWC3Ey)ejZT;^q^4~K`#oJfu#+5`$P@caz z#nM}b<~>w#Sc6Fu`6lzyZS}-v%bm+>SHGUGr-y&;rOp(*_e#ukv?tDgz_{&&l3Hd$UH0E;;%pMx{a8}=7N8(|(m)a>l7_-$CN~JAq_vYqZhRHX< zbYTmRg=!*B`Xw!Rb(2K8pcP>KZi*lmk1dm8ei;ufl|D>&-xD2(=W~F*4e1#bQb?yo zmY#gN;$AFp1J^m-CPw@A9enx2moo>Up*YD_rK`DJt%+6_U#j+$V zJa9tO`*hJ5JwtW;e^jJ?#r$@Yj+ z2swewdeq^xv6EnS;tf-9M@cmp8)|cage3)yw^04{av_v}>S19of_E%vWlyVS_Z8aa zW+*0KHBC|simjkRUBXDEx6uC}Zo`oW(R1pz5iccIwy6~oqE&;S&o6X}?d=@J*fPab z438g8NF3c|oEcEEO!9vO#zf#7sue(QHS*eg>;ieL3c~N^5_+q2$9I3dMv1k;AqYac^n7(S?hX&ttE<*vZYzvc62Y zDS~a6^*4S^!B}+Q+B-%2zH?_sR}*YP2mQ;A1PgVU_lOiFmLwFj0?MWTOp3jCWqJLN zX9puE-y>MEV7s@|TPOayua9YwDp}Uma}oK6O5dzi1H*oMq6$XpxU^Dg{GS+r-5cqB zW8YKjF4JVR19a(Dbg7!+?c3&lKcmlnpPRNXp%PHoX(M~Zt~2+{(e$~0VherN!RP9| zc*cW}3}xL0qY>6LSypCQq|1`ZT8Ti-@wLfrqr5|yiY>E{xzO&;Q+<|dy(I9bi_=^D zTVdu&F$@GV-MQHU=toHV`{3cHd)R)BR&`IpLsWXnXPQHft6RO9b zNXPg4t-KJA7H!(Nor)9uvviPlC)>^D5}sR^Up=PZq@LLEyEAi@l(<_3(Ri;UNa8-F z3Dm&4PAc0wj8G#3<{y%_R)Yh!oo6OfHVsu^1czSjh4R(H^2O?)gsFbplX1;-dcP}! z=hEx<{gF}ihoz%|!W3-js)wR)w!}tv8%#-BcF*e?+j|3fskISpu6fZSC z*vD1Qm6ve_QsimC9U0B<&%7{q3L+vcyhX>ny`8|LvXlxtcd81xAXV;8|#Y59mJN%bwoN zAra%d#g=2qkVabznhLbTJvnByEfoB|%GTLSD_>=_?uu`+?%@b6NW5@AsHI_p3bQoC zHV|e>U*wJqTl(rQ?&9n8crnDlJTDO3LuykI;$sg~MLXNZY-=;${XOW}dNtctBE^+mKOa3^96357EI?v@{e{DYzX|)JgXs7nT8WzrVq@C< z@0j%i7`3cqkM11$xrN2ZMZlI`nls4gs(IBY+<%+7$xJ@jbu!88x+!`3K$oW^bwEE5tx<(OH{8=TddBnJfov)PORfj6AW3I3m8mcwuV-_o z-Hh&o$&I`zyGG$>cIR44|9wJ2H~AppMont&Rg$UI5dY%B$F2!4NPS?A^hJF|h6idd zmy8stXm!=0oIS5-&pnUhx=pB36RCx_a6L3-0|P7yz?I&W}Cx9eo;_b+B`-Aunyh@$cJA zmN~SY>O1K)Ikq{5GYZ&;o|>LK&MNAHA0t{83`ghiUoSnFdqm@$ex-x`@cgdwo+p@b zbZa1M97`ny1z)}E6VU0%&J~43DC_k=YTmR68eVY@>e!gDjmsdx_yh#f_2OisptZ}2 zYa)svBJ!OK8edtD$If~wm=(+X43X!GFi}|@4&OiJ34G|>LBSx+59N_~xR6D8Sj1|% z)lyT57pk`*8x$6$;IH0EBZEy=z>oHjtDgJTwG|IDcdyaF^FciyP!j0{XcUd_NXhZD zG=YXs->DG-?kH8~)fAwb)EOxAay&Xs z_E90Qv10yEt_XeKzXuQD6-jW7rn9I=Bz`?f)8032F1qRGR(@K!@zdgcUWjf=O*GbQ zzvk}`&D`6HM&FG{KusF+R=}MzLj#PGZ<$#Z<}{Z2@xbM)B1TS+g`I=dl9-APWy^tz zh&Ge+UR5&-{{=8EcTP~Zt&ydg>3*4AA#miJPj5MgdPq%p=e@m?-P60i!d>=$vNX~x zkhknBF6m{9iMSF&HChn=UgWQi0ppdI8J^wGLH*|a047asa*m~y?ugyR>CpOg5@x0= z7mmSeh11lhj)QYyc0rZ>61oc__r5o34ePSR^VhRG5q_>=c`>|k<^YF6yRuiRjqWH$Wde?IV@sDQ%vMq1q@ zf8y;N<-h;iSA-45^Uc)UyG}X8W;vjM38%Z=#WxIxu;toF=i|UZz%A8@Y5B9Mj+ZNp zj|z3}EQ@bDajsA7JuZD|~%aR+mt4^k5etFG~8 zKGWm8;x_RS@3G`2{c*^9?V_*bqjkf|~1|#4B z;G0$-nf zC-7Q#0$&3P{8SizBDkzt=3!U{O;?hr(}eM3}OL=5=4K% zC+LHk7VjRZlP>Rk_*i>YYrBOJxc79TOHBIW`o;S>-4`~WSA~h-uu3JSj@g6nggfl` z4jxwz;(CVb3V}yQ(hrhyj1hMl64U4z8PECmmAq1S&HJ`XFO6lg(FA@4Phg;%bmGg%abZSOB(DQP4*O=E)7BQl&H8Sg|Ud8b%+s+2Mdx_e7aM`lpi ztW+-M$^^D3{Ng+V9Mm}+g8hmcY{|7&o%})+L|o?bvx{ID{e2JHFTJjPWtlu};&wCAu9$i_ z$neh1_|k7Xzm2YHzzk_TnW^a0RmpM*{Yi&bAD4kq2oS5K>Pl;P zcajMLHpeLN6%0_ped5bmJ*a+*&A;L3bSVa7pGzFFwK%r?X`{{rDQ%YiYG!M=l*; z$`x+skuLA#s$xK1JjCf?v)KRp^oL%P=Th~gR)OZR#w#U_%4y?bo=n(Je20~<4PZ2- z;+CSKmROX3Ol+dmkl#Ezt36s)UN{s5<9IS)4HWDre(D*n3NaG{;SB}h=E}eBiJ;A! z+VK0<<`UZ>$xHPcG3T-3k2woQsl zgFM+;Y3M*)g~RNHI?o;Vy>J`Y7+q4K8r)^-d*#%YnoX2)D%xwczN`Fb4| zWtEAc*6z<0Y4n&% zGKTrUN;hO9k ztT5&~M8PTY4rXf=Q~Dp6trht!QfDwnnQTIwIlK{|Jvlk}*wp09DsZUV-PcHqihbjK zDQ~{e9G~JTu(m!=;LaQI?0#Z*b7O9OT=iL@>z#8kNk*g~b%JfRR%C+M<%U zeZCeHgS9VzrIfqJa<_S0S|l0HHyV%sKftRf4rDh1#Jn#>D<2Gwp&DsWzIKobb!k0Uhq4X>wk1$j=74V8`X+$H(aCUe3U+B z6#DL_W6CwbE66GM7il)59QUR(ojSH9NpwtbywlSQJkYj#g84DPt?jZ^j+4_uD;liB z99KgiZ%qJV$B|F(h8cv?B>O)+L)0$b%{MiR7IqMBC+#R?88@8oLm@u3cn)Sd7sjzL zPC6-PyfnMN>=nhJB)*UhB@113n$CY(RpjvT^`2Cpgtuh*dl?DcP)A=dbH=}3x>Mwq z0DwgsCr1VwJUQ$mc=F#^GCH9M^Z(}fe`9V0ow2)LQmkn@3wOV;(wgo4>|C1B4m}TM zp>x^)tP3|M!(J_Ifzhp)#OHWBh+JGh4R??m#ybp_?2Kg*FPD#Do8tQJ6lt+&N{Wiw zwcwoU$}Oi}cE#B2)$lTF#aYkrB8c54C<@q$W;kDSw@0;47bG6m5R7CoDHe5bU0ELEO1n!?IRem6oI} z@06D8Pi_BZC?(mSZOR~QvY`2W%-ztgs`ggL?6vVh2Im1_wb$=j)?B@{@$0dV@VE-u z$p>6G$SrkcYT7z7bBe35#juEoeFur7n`}}Lpxgxh$t-fr$52~W8q&3hQx`9W3gT+~QD9<4G&RGqdQRF?)LS&eJFGrgX`rFLs?@LZy6V}E( zqPvfiBhDR9l(c7*C9vCPf5`LY?JPh3Kiksj6zho=#!8Q92TrP7$!K?ww>luh3pR?* z1Qr_|vdKeNNSr7`t!!bPvn_k8o^yt8{6fHmW zvsKebstp*NX;l1ad%myN4ki$dS=q22*M8E&hfg&9MSp6ukIk2AsSAnRNb`p?$Y~@Y zdR83MSrqij?Bqa9GQWt{*{OFjIDW$csL$~(ka}Y(bI@!gSaoT!HyQn2a}eggQ?yi; zftWBwH*7q-sdl<7AO|Uv-Kb)O``8`bQ)^I{H9x6BJ{q_PG9lUiRG=ec1d%BR@?6l) zONRUFQi}%1Y8j|+3Ln`$Swd)RDtvP%Wd z1NL*|5Hw!3yZk_|69}HKDp$^K*0AM&ZC+3I8{`r4Yp(AnT#W;Br}|R-=?g7=KM61f zTbM43V*&%iVUV_Riah4T|9cOlA)`TQvWfPhqpfM`by5Luk$PmEbxkR1H|VU8?n5%s z^@Y-^pk?FxX2gg3{8KLI`go0Z@Hx4SbEIGCzO@QKQR!4;7OtySC=(#X9@;~f=tdY17r}pAH=dBzT)x&HH*#vxpC)sbq(uA|4gQaX` zjfwnw@XAoqPk75vu0M3>WJ}6q0KC^FGJ&G-Utm4rLNg1L&VtB1K7?5CxlS8csZnYb zI1(#r8%U3{KnMVo2bniF8Tzl0mhx>U`TT)PdtsbM-{eSQZ zohpR^dL3oUA=$tRv6`jx4Zqp3<}xGF$ts=Gr)IOUk00f$ALwU!0oDTc9~X5K9`RhCd7KRzLb&T(B@T)A$aWOcdW z+CPX)ZI?DS65>(P4&1sBaaI+l71Fl zK_(cfJsZPoFINv5jd2R2Jqq?8_6i0{)ERuHnpt(Gjq!;Gz}`&soT>K}c+y*B!X5N3 ztFtg)#<_Kfamhyd{|okYJT<;LAU)O%v|qR<+@d%@67Ok>7a!_LqLUu7LbOxz3ijTu z3byY-s(H({Y&v;$|AUu}-`?an~O< z|CN6(g&6}(%LgM*yEs^*(^}v*92x-57K>i~?(4qnXcBV~avn+^lh|F5Yg^h^G zX;fbBdc4vcOH6&UOY1P{GJo+7UCi>+Tl2_snD9?cvoMe6{SeTPZv@=DM@+0rd9M8_koF)UK(e5a*na`(!PkAR|`9UQ7nsDtTA#G!RMsz3lGRxSu*KN2Q5J< z$vQp=VSKnyZ&m{>M}{r@%{NCdaH(JXpj8jT&?0bYw!37kA4h4bCKWVDu%XQ0na>2% zxM^d5+q`em@fqu*-w!E|1`g&0x`LU>)`NTOwO|%&Gq2cVFFJQQ^0Dzt{iHjSo*x6yDRoq{1q5WDsF2^^ zHS{j-9_G6NGvLY{PbxW*jXB+eW9|oi5_9E$5!_bpk^hXohcjzy{~+%eB8{xjjL&f; zf3adD5N`K|qbB{s#yUxG-SuGjl{kt!n4ur6XsGd-4TjsjAU|uHJ(a#2_weM@<)dJy z=f^dBt8wcY@&Gvqv}nc?lgF+8IhYYiu9O59UGPYOX1gv#I5kKT8LV6EQDwR7Rx;MA zr(Zsh7bchh(XiuECM)pGRhQcOCHYU%=mJr~o%ZRJafO`>r_8mkNtMJhiL4jQ0o5?c z-JYj!(m51P4P5#fxj~0XH9VgC`evO(hgszpqg(^9QFq`oRaOY1gO!t576Q7lYw0$BteWQbEceVDz+#LNZE32;SJE%U7Gdgt0%rXHeu7%**w^HU57jnm|!5nM50{?m6YPrfih2AR2%vp6o%M6EA7y0-&yL+w5=Toi8 zU21Rn+-`1L2Us-3Ee%xf1D)!bZ-g~13=`FaKz!6=hB=2WXn6P)bQ zch?^xI6%#0TGa&kpMaO-HT)Nok*TC_4k^0s0Gr`3ZlRg?66G&A^g`7S-aAZJrbMd?GfrSE$;OZHX?;b0{3SRH! zP3u`i6OM|em)L<+%cstBswW_{IdG=+-&S0prIh}EyqM+eig*FYL0#lV{wlWyNRcR%#Bl!|L>8X#jaV$0O&@MoX4oLR5GP!65 zkGH%vzBqogoBjqc+p|GCK8>fto6R^}o60ve{TMqR{wrS}gq;j;%`2f}JJMH(hgmqj z7ek^C>C?7Hq^sgM6ogHkN%z?!?B0Zin#J3^ZSuSg2+qyzWDHYr*SG@k4#w9SAD~IA_neW zR&9;G+x+?}u6QkrTGc9T+U>s+8wsfXsrh(b!vR93aUhr*yLyLazn;z~bMYsI?UAb| z@=&yifo?>U`AewiU0Cn`{f*~7@n9* z0A=oWpP`1o2CjJrKW?n*#C6;5+=X zV4Xp*bb&O%=ItCI-%NhEotZYdALzj9_##>iIslO<+nmH-xCkuJ{L_I#OltL*8=O{& zg8wDSYaSHBl95c~SM;t`cjnd@Q--WVMEHK&WN>PJ3l3Z6Z`D5xAUHH77Oo4L{&=F` zU*OWC*g0Y!=N1fPxZ?n!HKakNvDO~x0>RpfG@hEW#ABb3a!_XVoz;aL-GRzBLFO+V zJHlC!q4hsF)w=xOmxf{fF$u9H_lQM$F}DH_OVd2 zuR@b`;ozT{abk|~K5z)imV~{0G@+2lwnWGvoxT6zW^T`3&PUz?j=a` zujlLw2JTZ0>=Idzlw(*FRt?MA#FR8veIlorL5o$;mk1UUYJlkkh}{0K3t|c)0#kUy zU~$L)Z&GV~+%v84L`!VT0FY+rqc{R{vai$l{^ekcZ{ml$i2g9#Aq%q>{S+Xe0n*wx z3~pLv_Ilm>?t{Lb-5(`P-Q=7k)3Ls~bsrww%6KPeo zZai1uCB=zo2UuX0e@qVtXRiag%3SNQXV|b90RS#}eas}MiAc5m%5P@OCI{X!USQQ^ zjqfh)qjjYCyq$F7d(Hhf<#RBJX>CvY7>@jDXvyOFmr70YoSwECpOFdg_ba5;ga+^; zH#6gZU0|(A{fviaqQ5^Cea-x&tz5&rohC?w8yhfyq;~+1pcKO$`~$9+b7z`2UIC-o zDr1SiHb^!+rYIc1N-NOJS~7Rk8HD=J4@v8_i2ZRQWVnkqHnFb{H#6d{{#UW)_$BM% z%7)BA(RH_O>{OT^+=Ee~YRGXv?$<_ai$|IySZr84^tBw!C|}-tD<$z_OJT13RabF_ z!xy5>Q$CT&uQdC5<$0q4zQE?gC@CcVKRi)k^|A^9M0_0afNSRUbfc4Dw}c$urdX6Y zj9Jod&#!AVfI?gPs&nAYB79+YIV&iy%zJPSUZoPle)FPILEAGd(+b{l|4Fkyt#ykJb(GwBZVnazxR3ILD zC=jMclB$#bpik^?T_$-j$Tbc3t76ZBDe>jvP3;;u%^Jd|A|OUKCZ&Q#F@h+`Lwv<@8Xh5$fX@=kd4y~VtIA)&3#^LeR17jW zph3KbSiJ-fxi}LJ+G&syot3X^ak%R5^P%q9`quFK!#dy{8pk59 z=Z;8B0}Wuo;49|;YCKM#aXIzkDNjw_mA-(E?UlCkUWDN!WYEPH)j-6q;9jE?WIu-d zwawHi$E0@?LLEJ#rlU8L(DSNN|IDt}nZ^&EoZNxi?ep0e6nu@bSa(vIJh03T^?Kr> zss0exk2AmMKGFQ-EO3qcFZ!umXujAst7r)R>?l!Wl@r-TTTL^r%{mtQngjSFSm;qR z+s5;R7UWD^*Vx>(Ku&VxlgQrxxOm1*@^&+}oXf*q$Ea94yP?fZLk|LL2@_*OMe!t(Yk zgBg^eJFC{4S+z)JR5|(@K(z~?QBc$s`gXG%xLO~Aqq<--*#R%7CA(8xdmWoOW?Z(V zwmB2SrBb+1lM@|C6T!ncIO?`G3)ml$EZd}OOCLn&3^l8>tIE4oJM7JyGQxwdU_>5B z;1GshMc)kRo||=c)om}3ZkAd1ImOU}`!TA#>pi{S{jI5O6jS6%8;&|B1+K3rVJL)q z`Pww|ZByDR_p%Q}Wk*zU@JZzRfo}$B4w5Zync4M^IrAhgzihB8RJxS7b(AA@R=cZ5 zvz=lyREF_O>NB>mHb*|(_=Sq>UK|5yWURo|>yGIsKT9X)>zTdVqaoY}nUAyNZ(o`q zsghk^5&fm^74Q8)t>T;guhsu%;d@rjyxbNa72WG2?H|m@lvnI8?pzcTu zk-w$-{N(Qpd#V|pp{{nBQ72vK%SiyOK2)30B4e@ps@2w1hLnv!^?5=+%rxo9 zLGbzQ*(Mx?7#l(_Bpuu~#EhzBT)(qT%rFTZ(nUUv_as?SYnHhhRy1l=MmLiD{X2J3 zhS$t1U0>-L#UX9_!o>a{E*cnFzkj05DYgczVaKqGYg!2HoRVOoabkWU@X|bG5chlK zn8n=`V~z&n{FY2C=krzQre62yg2fpDCF*HIw?oUQqgU6}q?x&XRU!pVE1g-vFzc!gePKkjYK0?_0_fVww*|b9{ zJ4Ej3 z@16`{g5nxs09YN$>An0LJ#W1@u`hPA!RRx22@SB-Sf6UtN>ncM=Y&ByuQel=o?8Yj z;B0;S`=lUhbJe|?kv1uG4KoqII)>BiAquikK-DEjntMq*i8$JiN&m?wUPO9Uz|;J< zXnXiK8bA%s`TSPxmd@*#=~+Ov(s4ZO*B7^WY>L3$2#Xt5Bj?;Eg$}TH=|nf1hg|na zYgq_XwJgcrfqh$^w1`Kp!pC!#wYT@$hph*-=84?55Zy+{13BtojquoW;hu&JH65Vx zG1ptv=duS&&eWCR6%~tDPiZQj*!*QaiE|Bt9=piVB2ES1=!bx5(s?Dpee#p#n-QU! z4oo%G-VI-Mw1dM6K$3*sijr|i?>Zd6D&Ay5+aw@v!){Gq&XH201)QJjIug1axc)$w za&yu(k4&G`hMdHD6bmy@PP)HWh5|oO1?V&lq1|p^0BSV)>UCv*Rt8`p+%0pf59KM%rT%V%!$H&ML|zzh8n?Z0>vIDa4RmZH z74352*?f8-rwc8;+oLnB9RW6i9w1eV&J~<5 z)MRTFfM}m$?d{4SKwLWyB6*Zq2zp#UG6`J%H^`re-68Z<)CcQDM`+l!vrMf#2RT9I z%#njbMcUzooi_U9_0O&ao*v4}ZC~(LOz~9SJJ^&?>O5GFe$?QxSfWX4BGRO4;|BOGKr>*I?qJQkW zoDnDlw4_U9F^X9;)~`DE*C27hJN4GA)k1NeQFm6ol}VRqe}6NL&jB&SJ}pRYMZXl> zUd*RNp69zFcEbnU;16Wu6J*o}koSA1!G-aRKVvx@WSO9DC!cWd6_k3Gi}#v0N_T$a zV4ZG1*b2yBlr7^Ye$tCMSO*Kpe_Ue$)d|-zY}wQgYvxos#{v*=bR1fr2!+PbQOClj zfY$M0M&*b^}pEbTV z0hVV^&Cz}NifCp0XKwmVs8=$M+9}(8KIi-E2bPr!2I&O_70*QtfAorewSUZ9Anz(V zz^pIvPhR-E@WBpXWAX(+Qa))imrAJ|$TumQsHPFveqD_)0c3KRnaVSJS0~REavgn| zy-kw;ovy4yw+A+6mpl#A3zVv7P^tpGK>7JT>e1ywGqgoUvW|KuO2_wbb}{SoKY!zg zT|={qdnFTNkQF zCsZkG1=Oc8nKSxpJ>x~E@i~ZZYo-|`P4s5KGP5S_o1l%4Oq||!oh8TJU z{A8J?OJ%_-`L$Qr?Ml%m$E%8m9kc#KnVE~5sF8oC)O8ROuQc1wfT%l1lwPhvm_LT) zG>0cC*&$lwLls#M;dj;es(j!Vv&l1GrT=O0vr{zvDgKQm_t>kv?IRWzW4Rp1`@0EG z7Cr=bG(F~dy!{)!HdlW(f$Fv*v_MHP9o=ZD91sUB%Ymo7@-JZb{M34sP5Bw`wq-0q zQh|l+nKBvI@_imFc%A+eEw|6x@oU&0U*NtDsd&_>7AwS*n85;M2#xABEI$e}@#RqY zdQVMDhwpXgS*C8iHBN-8pwVAk4muv!(QN#8^ny%lELB5oI{A&NOWD+U!5@7TIb#Rx z!BG>PhifpV|1;2`;TvZca&RZ>% zz}D;Il91c0aHatAknVjKJVCYVklg$QBaJF{J|Qj1_fHgGkf^aF-fKMEpQBF?GtjBw z{TuKsYlVmN8wk${^d*#D!6*y`;mw1K<-0_NheWVz}F0LhsEneU-<(Vk+GfZn4< zVh)_;rCKHTRG%>D!u*2=Oe3Fyw&(>(=;l1s<;a$esdRM}6%z_^rHV14>|4Jx{3^tS zkb6g`$Jso=e!I`k7pW+^q)X!U5^G6y4{;KtTT2=$y5Ti}kH@fd5#h#H0y5=Y-tg9~1D|#O7Xmwx5tcS0B??OZ_@& z;?>2%c29Y5xjOcJy|3;(<#=MKPQAKwH|=@r&%{vjelwB-X{bcry!R$ekE9aQ<^xL& zbl%LI-fWamwueYBVR8EbLS*;$VPPLuG9_*Z37hvt6418sot4HRI3~Q>u@$*`zWmB{ z;bW-BWeO%8ExXjtuqFGG1kV0uVLd3O?P*S*^F{%e=ihC$F2&c%SW2SNqHhR`@Tj7z z3j6n;f%)8X7_ILL zFCZyw#NpAOFqA3;v%Rl2p6M;8?@AFZO669;z1tdal?e7%IIS^@J9ongvCMh}S%heC zse0N2Hy#n&M1}=PammT*6t_bt*@)jUwbYY&Z*2fh*%O7MtnTuy?hweYK1kpUhN+o-9V_2)VozRGu7LMRdy5Ox5E6Ox*T{h}3e-aT^t`-hT=5~j$=~mJN$H=lg z{W6t#E|qfs9=+}M&1xT|E3m} zk}_|vPpag6z(L4xpQU<~m@T7g@C^Ui>6C(zH4em#wG~{Gwt37efOKm zts1(VJuO}wlQ!&SZ+sr?V*~S^2<*xAH^OHL^6x41&$46LpMA2i?6Cj3nGh1(VbqyG z_tdvisu-YAdigSS&c8DJ%W5W%;$>C4-G;^RC!#ig@mvd+bge>nK6K`*Cb|5$%V{ zt}$~%HTzEt|CkRNKHP$f;PutMZdKODU;l`IoIfvfC5@e#Amo9|=FABDGQ_7QE36yQ~I_J>$j?S_||NHyszXfaOqdZBW1erGV%M{skmphNbuMJHbkMA z-{neH9X-ShpNDm1W)@56nF+Qz_dry*gTKaUx4)7R|Ei^f;EyBmc`SLAjlkBti)}<- zwfBR>e6!aJt?c{kS~N^vRxa<}xOe+<`MSJ=M8MmWE+~YX1JAJrxyf3s2P~e*2@_%; z83|8mG;RNdX%0tYVn|Iy`$vcZAx_XAUIM?#B3e3>apfvkf?P?R-N zA3UYQI*#1b4tkpu0+~U+!@WL!tL%H@!TSnxH86qIV$Msg`FPYf4DbAHm!zLK^sDhw zKh@U{5rhUZOpt}2DsM{nDTk|ybmgXpFxV>B1#RnGFCerDUc@gi#O6qy0q42r8Io*-Le!r zQpbQmj=+CrNJG_9Zqm{V=MRFP3pB05XdhA$_xP2i-#JM+s7{PY2X8ob072 zlJ0F;j2~jtM)Cd@?SJvH<2#M8hP_d4hY**7KYz$G%ID>Lzp0p0i@decfV9K3OO5g8 zkrj$+8LSFo9)-)qDjzK?S%o`s6xx3?MN#vO*(!28I4H-QwEI{_CbU`YJQ5GCDuLuH zSCkPLS)82qG^Y6M%Mme!)a&@J@z9WqBI*-wKx;t3Zh8B5$-si+#9<8rvX1-k>I6mku6Q{=^?6+P{$s5M!2d9?K6p`Ow|4l3muTp8S8W~Lv zi%@K+DRj+%F=vmIV4M*-jwbIHv0nQfnlv-K%?LuNal4=<(W`*>>GdM=h|2{YaC6Y- z0!M7@4z*k(Yta|$jkV0Ec0*?1x)B7IW&sppAMQ`rPTEeo3oPFL)4t+jhWj=K9IXn# z{ckJ@i;ygznDY?ck!b#Q^bh7x)S|o&^m@I~1$9^pM_v@bZ;rHKz<+I)^QPfT}a2&UQTofQvrx zTH^R^@R&+ryPAyndN`BI~t%jvv_-sxXEhrzZ`N|Y`$)U2HfP| z{_?-tuyuilUZVTb(T8B47yM4U%3A>B#r~m;-{}Yxy*+RU_rB}`=in5Ex;-~sY`I=# zM)NkiIL*z1&1?cd<;B$iaJ}9IMf~MLBT1Z20RL0Tz{R837HaXte%S@}sHqK&2H~J}QkTWsS;IwC+|xs{kRQm4bk9~&;1B$YrNtQDD&U95 zjIc$NZx7&I58$m2;GGZP?GNA~2k=%0@J2UkS+D};&T~@q zb-}~qs;l-3S{Z)e))HY^3QQ{y%5dC%BrUp%Kckh&`*w=7oFcvXaAg^Q$|*&k0lUmi zhfw6w?bBT-ax-Nj!FfB!6iozu??=p>ik4p)g0b@cYtBQYNb`TxMvrOV6qL8DZ7SZ1 zq?E_~La)(67ciM)i@eSXptpa+uCpo-0?fcw9PAdMlI4d#g|O zE&=>%Hg0ke_r?WaI=yftreS8kkjwk@z#QWkSH=ozv95-3r9$G*4;n64ofT97NNLys4( zW#Anow|lEV9o>aA+@`EOE8y&U6J8hF=6Rsv+G6s+W;lWdD5Sgr0*>RdkZ+l$GFGRw zf71V4+l(ePWt?d?w45{O#{hs$k7FGSy{cud|X`lAov^Rs+erf|KFXP4-Gt6v_-E3o?` zo3u&Dt<%3SU*To%SI@z^v%TsG3siFe@@jAufA;1QfKGQEGaiXo8BvA9qRYn`roC|H&l`wM+{0ySH!x2Te1;y z?9%3Z2``3jLJ$ZI-{|t~Y3~{9oQzj4ugb&KQoqyeN#qT?feSv&qol;iXbCo1ohNMN<8 zMbamP=Jw{(O2bpT%j*r%f}b!w=7qPS#c@6THIueN6z7w9CmFfAwyvIDcgWw@|=K2+9q$gUi*-b#Qkf*7#Xc#p>$DWlj-v7A#s9bA1+nYFoI2Q$aUk^ zf53Mm!p+r4az*^#a_NNFBBfDx_cL|=&*yQQUVH4abvXM|AbAQJ( zBd=#&;MWLk*zFZ>G}+^ly-jBS+Y&&#XG13AX(UQju7yd+G;aUaGWJ` zGhhqzyXX;+xe1LO%q^(>*6A_(q{RBdz}o3#5xo-ya9q18UOc2T{`G#c{^$YH`q`0a z$h|1Lo*qn^zy0My&IgrH#Jy|hGsDbCw4hPlsIIW;F#{6hTCy)JG1i}=`#lBHL8?>5!kL^R8 z@}!x)9(o~_^OoHG-T?oR36E1}?3-&d^!u%s4>nr=Kxd^)Ii&)&zue2z2KKvl9yyXA!(y>y z(zF=TNfdbXm+u>Ts)VXuZ@EW`SBDL*o_q~g+jN6qP5u5Ylrtm|zIdGvLtVoBk1w-O z(elsMk6&3hd=WMHMXI5!#-K<5iNSxbEaThAoba}ijU~esw+L)tzUcS}|wIj5oqzzyyK@CLk-FqGJ z$6FdBXgK{gMxqE8TOlfhX_teOGLwSFBiv)$vPG#4Nsu`^688xcR(j z6x}grAs(#u5xBBkN!Pd@M#~WQ*3}atNY=f^C`(qzsAF9)UTSqrOCUz_wG>1=^=Oey zm3r^rAe`<4Fc=A$O2Ybj*u-8XNINWdNlTK4r}~QTY2GJT<}tPVTNY=?oEmO2pK|sG zkz^7`jm76TQiT0wY#u4Fd$J_QAL?;Xk1oy-K}2Nf_=+0juzR))7dCHMpsi~v4>hot zYTA2ZEsl6uIP}zz6SC`ykCH%M=S8 zswGgrFT{Zttysm_y%_>cM35tWE*7;nWF>5g1d#p_jX)c5L@UZ|T#U?|l#A|LHadDW z`uAELaP^4GEaetw>*I&-t&DVE4fPptsnxn$NzdFA0CM#olEE5~qM#Ni9-c;(hATER zWPsQ{UpO!bXGU?@#MRzHMs@`j*sAW@!)xZD$*@H_Ob78L{+ajpp?{#jlw92!=K&9`p`PT zFPqs$Qblr9G%x!!FqBjNIMBWcOFZFf$NVwlt(Ls9zXb_XrqT+v^d&n4l1hMb#`usw zMG7&cxR23%Nrn@zQZkf_5Qki;PaI5yv-QoqB4fEY=*-xgf7m+p3Nv~hht=}%F-GS> zFwjup`7}5I@6#Zn_1;7%q%}FuGdoQ31cP%5>&y6j>X%ySGIv2SvXCnrZtNGHM^Bfx z+_9Hno48B+6sdU!g388~xF;BceU#zP1$AJx-vR>yPftSW%bxq{cZbl*0{DMN3-Y^8 z&x0~dnMxmJC(Jp?Q}bu{-|XINb^E1P0TQQ>6aadG0F3yC;P1HQVamTkF->6Z2qyD!c zHeF-i<3NI@gU1q_od?cw>mNL8t<`mf;+<0O zr`g&-H}80L;Ip}kHmH??SAEg~|IQughkwgJ*gAJ<$b9S)f?|)KVFQ6S$hR4zMg3M7 zy>{I1Y)VL4Yj>~KaD5*1;A>(Yh0dP2(bHM*|9HRh5Yl>R{Yo}ngVamn*;{gqpDR5v z7~=eNF_ z6SPhF=-j+`i$l*8mseZigf0Hdj)O52r!9ww6ZU0~C66ie?*QA0#!H_f5!?hokbr?WO25 z|2{hTp_16NH%KlcAnCLAkBB-p+&5<~AyQymCiv{5LhPP@-HyJYMdrK#O{mcfraF$} zhoE!mnih!73}FbFy0yi_!crkIt1aT6mX%*Rm5ED({<74}c*PqwW2pY7?h1JyQZig| zz{eB21AaG8o)Y2ALn^;l`3_)@L%fT(Z`$OJPpPJUU$6FQ{Cwokn)J!iObBhBosG~* zalCmU3kS3Ajs8RFrqkji8mmVS6&*`MrR+-{-o})sko~6CQ|ua@(4dwa`+RfumQyxa z@1pqYj$DMSFPI=#@Sa&buw zVQv#+Z!6==qKFBDc$ThzVI-`J^zj*{egBjq<*h8&>V~q-Mn;TPpG!wxjz^#y;=x5( ztAb0S;$*?+Jqn-rE|tr_@|Aw33i~bgtKo&2b~{3(K9~KYCXUFyLl5q#??>cYgtP+= zQ@>{Hi(YEJJWbl=>JNOtwNc|()aPF}>a>P!^|%qmmn<XfoNZI{2A=ifNnP$>u?*gRX;*6nl1DF$o6;bLb_> zT<|`<{w<|$P#sytGlFIP$u8mGOZB1f_;GrPO}x3ReR>Qw>D-U;wpHY)0WYcCf9~9b z$^>?#Y;`H|mH_MNakOI|!=c^rar8lT_1TrsjXLR}MJfKZ&}BWPzj61<$TFKgo9R*|%5B!Wv4s=nJM) z#qqP0f4dx+k&{mUe}ugSR2*HiC>jV3!QH|zNbulJkO2lwaMzIF?m;F&0)q}NAwY0< zXCSx*hv06(-3j?#=ljol>zw!Ay?3qY+GX8647K;Js$IJqDh}O^z*(#)DM3r$<)_4s zD6r~At%OC~juv>m4VnGCjgyyVNVS&Y9gU`tzQrDqio*Ezb&vCdN@SFt5`FJv4#lw= zd6#u3WVo=N)$+OqRjPBgq_?BZjbG^}d>f(#2qwJclk z=dnb7r^;=9$DY$Pz6{8sHDk|t8sCSCf-y+=HvhXQvoxtG1-vY_LSl!1wL^;C{-g5* z-tZrld-%J^Ho$D_#x5hQ;Hgpx#$T?}wr*^)l#V|ENV_e7)L*B;m;&m?m~2Y|SOzgu z0=Rq>A5`O4xpANSOkbz*VZ2n$!bZG*Q2j`{Xx+t7f5eXx@0i7Qw2wz(@RKP73ZQPp zhMz9eCb?U?qo76rY6JrdvjrpYT(hjq!m= ze0;N}u1bTmi34Fs)R&mVubwTc4_NOrI4J^SLdNsD$N2arEO+n~Ltz~yE$}`mTkDJ` zlZ6V`^QKteG5OgRtu=oMSR8uUTW4VMjuyYh?)HCcw89+0(`%VZKA4gQE|d`DlVIu% zru9XPdnmaY_2?t|I4C0#xbVq{l>q_5j0;})sw$HK)D+eutox+ZfNwq-3>m(W#3KJD zS+g(uF`M~V=k2H0n$QT$K~#erOOWly10w-Gd^hDuV%>q*wtWd2mAPm<1s_NB#Umva zat8J+QCSQy5_LHBO`>`B%)SPwme1|BToCUz9_dsSNg*qAC>v9@0Cgt{Tv#J}(x$sP zL}xGuZG<7<@GCn8NrpB!j(*;#TE?j>zcc%8y{D=&!coc3<(fL=iI6&t_yRAvDs}K~ z0;P6>)Y*{GT43V4`vETpIsndl;Wkx*~tf(932Dgq=GNi2UZgPvJ-#4Q~?# z!ovMT0q?k%`^^_WVM`aDnfLQcD&f6tRF{<_ZLkpirBCNIOJ8J|7M5@a>Y6E7(-)Q^wcVTa7y_P=y||am zduPsDb<~H0Wy{Ujjw$sr4r7{^`(AU>UB8ZdrUBtY7?TkZa3J^*<2f}vic}4Ka+Ddi zHh=<*>?H-Z*5Xz#m`D|JHV}^A@?s#%vQYtaTow z|NR?(ipf^1C%h8Ilr!6KmEj5t%Ey>yy(O~Mubv*etlcVx5a#yy{hTA(v^3;jTgXChr(`rse`$^*X#Z>g_CyOwHI2 zC+xjLp7|XWRr&F-V;SA$WK>o1*x`Qpy+LTvZ)VKw01F7p|L)={aSx-sX7iOPTiqr3 z9pO)4)^`JQd)jzAsPqDcpRvvQ!QVI0*OCnDF1kwCJmTeKU&5y@HIcM1?Jl=SYz-+c z(6Zc%w{io%1Tk#;Un*1d0<55ej$;?|z+%Rv=FBfHrixf8sL3cJqu%c)*7U`xay5ix zg-^)c87Xlzi16}a=sICVoss5GHXtvndVxfNd21eB=UNYG426eQzUHGM=`I9bxq;L}4kYnWE*goMg;webqY5 zX&8GwvT}zad61En-gXh}S#o{X`G@x5_X|iC@m-xxhb^r9Ns{d5&}1kf898xSWO(L3 zy~-h+82r~ylIh-I`e58CFB!QeuLx!3{wRG4<~Id zQagbkytL2bw{*n<4eLmbC`_E{T(N&PsbhA)GGH87o8YTG98seZ2L`3vMjBc(kNP$d z1L4W)`cl}$RL&BeSYfaJC%~Lalv*HfR{>MHHXLY-l#*pJ6(9pl=_$w$UV1CZxyeJH z^ugjQdUBOh#?nt!<+0)fX3tzHgAjez12PM`!>^phU#|wc`luhQ98H`v%AzS*?TzsJ z2IIZL3$7cyqY~6K>@7!Ov1Hce8m`1S+AD}xKX z{+m{V#+~*1TVFZT`kSuBKCr6nsBot%oLCJaqofS@{&7FExm2I=<9ic0qs)*m&r0zD zoPo;)7Hb|4O>KTdJ8tt!mcnvJ*1k-gJCTrs!f?vN?OTXGAbDdANEqF}*-kr*dsxHH zg`bxZdqt}f%ul`p8H1Ybu*3cA<0q6fU@lCaKXV;t zQ*rhZLb#Of)lN=B(TXutAdVhY9y~=bdOSBs$y4F}gYLGF;XrJ{$A?LC zT{%DK>BDoXpjsQ>p9hJDI=ObKsOzv3+bTyTa1v3)t#QJMZKa%(1mhDcj1@aA`gx86 zZHh_GJd2y!yDy=s-%-#hYny{~EG;WOfTD?3Cg$b7r7O&R?E}veqI5Q9=~}br1PWM$ zxM^9CYs^yVdO!YAi^ySQHwPAC34ilzxJM*}rk3h|{%AY9klcpykB+u!d4U=1EdgS6 zY6kb4IZ*G212zDU$i9JV(04;>uIN?KM(xU}S@A9d$g40B2Td+9({q~5KZgv^2rXP4 z&`3WJ4#c0;Ij{NDraXP9{@lx*_mQBF>I;T!_3^i1-#ruDPPWDj4RGG`5JlS{p)h_$ z0rV4#%ucgYHnJar?N3o2=bO}FWY(G(@$k7#Hr+Oaqa#Dt71V|yDHmmPE8>Ohy^P3P z{+TjsLm3`}X-O_C7y+Z|5!I;^>%zn*v0Qt=7t@pc)XwG9&Yj(sBTL_k69*=lO)L?K zu6^0LKQdj3H(0zsxUw(5*HQ5b2``~E4Ti=|I zOH0`xRORkEI}ECY$MK$qRC7?QCq|71D4?wJWnF-+$Qbkw6V0|474XvZ$1??(MZ>#o zRL-L*HJce|Qse!>JI;o6%%U%ys+mPWu`@k1)=a2I5;2)1->G~A4gBgi&rl0#yH^f^ zGW-$nw(P5k(e2Y+*&WzG*@RA(23DA#`*WPM{-DI^KBOEq0V4|<9G}TiX6S!_lY#$- zWc|E$*Th{j1Oaaj);|r(fTIg(M&H!&SFf2GiSuJzr_jeZ zTlaOeIUfyE&Rtq;0dSgpU@yP`*)6^x@?Pe^g6NG?LY=@Ax7I87H!g@inhNi~M%nk@iA!T;V`L`GJ zR3``Myw)hCXCcTy8O~=-gre4{MHtroeXsUD#?G5Q0*Lk>ve^>4Zb)hki+~k$C@baY)R-(-+>@JH1$QpF)U9w>P` z|L9UKT`vu14}FN_(1VN!`Ac3a`IBPo6K-uRR|&>6`zLJ5($^?O;~jKuxbyZ#1MrjZ zRJp#7Kk1^e$h)ea0sn-C9FA^76b4%%`=7ME&EFHjuWpWA>ULK&VqV&^4-}DVs>3dQ zBB10Gml2Uy-I!q{?|Py{LbCca8ltp@no*4*JA~_>3Qyn{chxcx>harj<2^&v#hB~( z|9pOgEIy<<3LOjQzOY$7e==N_O;|HYSe*0x>)Vp%N)9FgP0IB-E(Mz`tspuLHP9HF zOvu|F%98+fY?qAGcU6p?>kN!R?K!aihr}oOO+P&TYCt>$v-CZ<_32^q#lfL2!;3(y zRqpe7@mBWLHw8>E>Q?M!Y`odb61{@A=Z4xo~ZFMu{Uv30s~RFGlFUN zUbeGBuO!R_*=-$z=z&_J9f;lx+PUSR?NW-w8QtfCI_>R!0^a&2o$*=2Jir`diKg{< z3^pO7dLwAD>2Lc_U7b|7ccoT3n*9E$ya;|va{(PIX&w0I6pyUjmMo{PHlrd(uqET0 ztnNoa6Zyre)YCdgeNhv6BO13B;H@-PrdmdVf3Xm&)z*g0zo6+anEVS4{{oD60AP4m zpl|dQR&(;GAadfs`1u*f#o{auWc8umF3#_JyY|)rV4tFY>=orrI^@wcR9rOFr=J^7 zlMCWfgoTTRMV3MwLmDjJN%r=h%#t9NVajh!^A7zTRw42;jR+AfvALR45^jy=tI5 z=ty1MJwr}J1j32&z>ozOrS_^?QD!EBu3W^V^yFrGXhzF0ccU@WsQEev;TTyA|7H6c z76+@VojZ_J$RzqR>18Qv@J#ZxA3_3*bbjo~ber{Ce$6D}-8Opx392Wn0)|4j)g5@M z3D&c09&TVLEStZqrLkWO9=cPJzY$Ojx@tdi-Bo?AAf_1f6U_rT{Iqh+KS}&!c0Tk{ ziBf9k7$12S<~G0(ruBkYw0e%}~Y z2=p*D+UKi4UT5c#yiT+~pw-j$rgUJUg?KdblW9(H*Z_19MjzqoTIc=YO5D zFGJ2@>nS^TPpIXo zE&@bR&p=4K(es`XK$~AKBpkOUMj=*b+l%#=7xwz9i<7VrEXnV zll`^7Q`~|1$ZQoVVKoHZ;Yo)7(-3{5B2CP~X_-eUy{t90z~r~c)2LUw99U7F0Q4=a|q`rw_HH!jYeA6XET2u*j>jIgy+ z87vfqD65RK}D9sK7%Tbw7rVw5A^$dfGN!&EINPHA#2KuLw6Zv0U3s+*sB9 zBk~!Q&v*9b^EAI1CS17gm!lCz#w16X(Kv&nmeH&77J+hZwNjO-{mHujhBga0a;tq& zncA7G`)_D#0_qk8#Syn!n99`pq(_qg-G4(9UT#rYs!Z)okd_WRraSdy+v3x!xu4pk z2Pj=qIv|g)3GR)v~F>V}`;J!547>s~^sak#d zd!FNa*tL0^^<}R)HCq%~eQxPgaa2o?H9#0&eydL+%bS9}%WI$X0BBOugGzbYPqxu*rS(nnr7>L)m)Nkml>uhxSBw zEsuuU>Re7XC-y3jX10Ff;wYhnLt6Y>=Pz=ak^Y;O9aVnzH1HhnwEXSIy0vq47hl#U zB#H3~Huniyig(Zt@y_k9|6%(eVc@zQ+>Nu*na;k2h7}w^!$-XYsA8Z!DcfZrDC zra?m(=G{T;=A)?p`ey2Lzc>xAkM*K6#)(7E8lA<32@-tR6X_k|=zBJ*zwSI- zs5T0Rd8Bx^{19K>{(5|_?(JLHikvc8+2cL|*y%sSN4CH2oU6P07AAP!lF|chGg8ZB zrI`CfJH@-?hxpI!ulwifp1y@G06XFRFHnNZFAN4RU)EM+g2~Dt_lZ@Ccg+v+`R%WV z=js5v8JS?b;+k*>C@%iu0}he|&E2eo@4I}!K?2K>J&!<(EE(eXz{$?*&3Ug)Sl%+K z1T1@h-&w`0AU5H3R#-~c`mV0SP;cxV{OYReM6Tq}cffvpucV@PJ}~E(1$bMg=@;m& zNNkCZ>p;@3@7#by_#p|bBvb`=A74uLTn2*a>t7O&tNvlHYc}dN^MwNB^&hQAV?!J} zc4=53dx3CQ0@{$)I}^irNdnw&nPJhV&I?l)A8Vo0oWa+Z5}XjVc&Ykz;mNE_Oq${u zzn!TIm&)?bg}*Fd#YOHuALx&Pmk|^%uU-;iL7P+sdey8eO4?{E+=zT)w}jW)!&apO zlmfwd65(r&IAK;7M!^XTx6ue+LL#|Nr5V_lRl9`W3Q#Gm3nSdSQ=^0URq~oUM-c61 z#N(+^<$qBUS4{og&S2$0xvlla&{JpSSHC~s1oJ&7oTP`G;)A+n4aI)H2mSm&5Z)QK zT2VjZaqAdRT(oEtwtCs#`JFb<=+c7e=knXy;t^;}Yiy`bm^bOKcJ@FO3|W|jm~ozR z$Oi|fb_G#=rMKE|-dF3rb@YTxynVXL?{bR(S?sCo371DYg-3@3hnJAAG#b|aCn$NX zY@nTLdw@Q%T)p>i8vjAXoydgg%K|XriUL=3(a+x11+C1NnnDF`%l98-v6aZX{2hVW z@YE_!qDil#@XS;YmbLbvayPx&+8w{KqLKW+NZrRN_WouEB~jd*m#l&}1KQqXayL6Z zuZrS1%82J~-QrW<)FoH0K`^#%nZ~il{X(->fmSdKnukRk*xXiWmbP;IJT;;aX!V@(1n*#MiZXzL-)di4PxW5+0C3@AE(AD<;^Z_YhCdoG*&0L0sSXT#i7eL3h}G>8SXppXZc&*~|;iRdSb3~ZK=)9KHy zEU9Z-0-}3=X&PX`Cs@~H8UhEn4lp2o1x2HTryKK*q9sK4=mq}ZFU6(;F4Ii3V^33^ z*`ThA*N1Z}uu{51;tylXy7%+e*IW`Gn%pixRmuC}#@Xv+SG(0J8j`;~qQhz7tZr58 ze^Ji^7)b|KjAvIV`L{w#LX%wQLh*1rX(m-%1c-atCUIS4NLOBUD7FFrBQ@J%MMt8-yY3DwT%)Xzp%f@`@2SK z8#OlznwnORV(J9>IA9xu8JvxpUdiTkI#=&;cFD$vzBGe<3BRiItbx)Sa}XAu8P^4d?CSX^f@spF(+iWJ|OaSed64+ac={!x*YH#jpfpVLFQ3T8e-n*z0- zhj6t%=3mkvZro(Gd~*6j!tcb9&M26O@HEK_I6VpD&hIGJ4^i8yc0%KT_^(ap@s5)v z@Q2?6w}Qsg%1U8SqG*kXmAt<60iPwUJ}JHkB}oXSZEqmDusws*e=l3h==1xz0Yfu0 zV^@Ey7njvE7H7}fy8OJyF&hWtv8{S|TaE#4cAFE~OyqHrWH zC&3b(zj)V5>W`39Xq5WSW-bY%opOxX_cB$Yufwe5(gUOo=OnK>T7%zt@WHZDyA^zX zvZ|w4=}ip!Thh>2*k$=(F|doJz4mYecYXPglVH2gHgpGJrC?;_yMwqoXS&mE}5~jBuGsR`mGMZYaH*xeM^8dwTu{EqalF)RF?tW+-bC8kQ>trlqrD> zxHa9iWbAGQkoPQn&aC8wwOfB}CMDx5aHS^tM#Hd+MsP--f%E0MSdkbzFD%(WlLHXZ)?Br=dB}y1fWNOwagf(&wT8GdI z^{M<=YI>sMo`3k5Kay|jZo6Qd?v+xooNw!GyI}JFLHAs2#f;POQwqBC|2yhoD`t|e zo>DNCzxO{;$@GXldm+nlZI33PyPNRNmdL|cN3QZM?-%5?CjN2PkWn>jwP7!)G!YiMq=52!rmPvjP-wtJn}T>jNrhW`IJ@_>8qWt(o2{ywGPU!VSeqU0$B zz4^ATwuZ*(09p~9XhM^qdqD;G{L!#ar!W>z4YW5);DGn0M?N`CTrDUxglcE;)0~0) z`x%g|aalIj3R?TlA1p+Bo(-lx*HorW`Y&d%JxVe{BX6lATs?0$x(q}(1u73%N`C56 zvs9Wh-FDYIpN_1x^Yh86Co$H!o6H6h4&Pmed4EhP1aiSWXku$6&37%RtZ*2WMu(2a z>Tyo2sh}ye#n#Y1#lHJ(&0Tgx6U^}FXjyjrsq%;qwV|;m%Ug6C*HF3%LCF+-1GT2;IR~2Y1>~1#`GBPvzWR;!4s&s=|xQ4qu@#So{w+<5E6;djqT9w z1sKy#{@)?az}N=QcI#p_X|z*N*fL6fzwj&XLzp^y56DMFa`oF%rwzLWSh_1g5i?Js z*)IDMO@SB-T4QsF;->j+*v^Q|K58pr&u(8==<-F@p}tmQ&9|drSBTcYnQ;J;t88k=#t4}4dlzzS)Qto^CFz! zg;8gzQ>&xe5JDtPc{-y+sHZA zScKLfKJZPlSW0od3P9)K7+{SJtQ7mY^zfL!w{>u`jLq5)JFyY*M4=$tm#9ah*v7)f zs6P<-o4F*6$EzsWoL12G4eSJXHiETa6%!=NVcq*>5(sP=xWPIZ0PIOokEMc zI(YGufMcAbWK?BO1!*M*KWh^_PRrn@hs|6`Psz9WQ0=(KqCbkV-rH)#7{()8#G3wJ zpC+-U|LuqHKVp$qvH$ucAbyc6|0j4<;yz(Y@s9r?KDhmL>s;OKzhX*&4N39N`5`{B z{dMpWbsnriZ$w>4q?hBATpRw{x1mVh`nmDKm*e+0e> z*0+rK|1;E0c)9xqR&zLQvywLuO_{*xjkcUh+FYZwlQ)p`iH}u&rHv=>dz5rd1?%f0 zpA9KZ4@~*}enp;^;2;FB0u{`7MPl&cFX2l#QT|FDEq50m=Wi_9_(vixK1ck;q{Kv$ zo9CMzk~lU!OnC{741mZZx%*3q(UETNXTK;6&Vd;NsK=Yc(%>8yk8oqky-Ir(<>Y#ou{A3z@`_T07X19tHFD- zc?ep9u9fu;e}TO$;&qs;4%Sr+7i9Y6n#eNXe(?=u5sEz9w$t1o?S#|-_dA&io+9_)AXItW~dFh z&ERwm6pE)@FY`~CT$PK@*fk{XcT!0vF%j0Jhg@#4#)zb_v$i-{(LTQtr>o6lUHq8g|KV0t}<Sc4t*NH& znj)pi5ZGa1vC?F|$LXsVdeWs%Q7@kt*^cD9guT-s$rJ`+|M5DPu9kOd~`}~Qo{%mP;Hjak7j2U1U z{Zemg2`$jq0^daA=~opunwP7o;VnZ02q%clU}L`<`%|ZZ>OJq3$N&|)&sz!$GEMho znRm{yu4Vs;`nP^C36i*LiSx!Yg&j&bYSs$Fy{}7tBGm_-l}2utpnQa#vn-a9=M>gw!jv{eF{n~kk$c{KIk-?5F zzKc}5tctr2b7&Gms|o}GkKCBo zrSjuZu-{JyttGP|FDy`5~^la;iv(h_qz=OQ#yOpW58|)Tufn8z>;ZG4M_1?B%lHj&8JGJd#y*pxt`c z-plByZ*hIlTHPl`T0J9OP|O?@t`itX@zL!lF*6l5eWF z)$!sSDP-Bf$lTo@+8e=$st*v56*d<{8rV!dqcEa>*QncJy4z-VZG6J>&ROpy<`Qugqg-jICG%k;-EGoub~>5<`wk%$^SE(7 zBW|Q(uB?{;Dv@bD&En}M40zcGQ-$Hah&@p1-C8GqXdA0A0TmBV#V3l1u2ZafVTGpv z;k=)N`b|g5HoOP6cQ_oErNyTUeG#`W$YYs~NL{8k$&IrD(b5P2zcO5Ksvb4Q1_^|nxine(vLX0Zu$cPpqaTrVdG}IwMJa&=0XT2cC4J79J%Pv^DlHvu#O8j7tJuqV_ zwj7s9p}5xEc1)n`24tY1_r&+TJ#z-|?3R)-Yx-GP$TXe6a4lx_;O>yZjtqocT&lKf zjrK2fE>kd|^NN2^la{YV7V8WJsR=*;9)%W!L{Q9xF)OJL?ame4gRdCJ9mUX ziw@@ESwEp0S~Jc8H-!8;6>He~u@?TO!q!2en4{e0b5U66RFj}1E|+`Txom@%X?RmT z7JJ4sxC55cPWGF2RhBE9UF~0cJzJ8V=j+z+!`-`W8 zFzOD&Y`4(5J$Ig69u3q?%F!#%5?RQDnL}lN@Pp(z64Q8s`}c=7=Ky(Z3@w@Ihg_+V zu!W7l0f_QLbCXZKJj$ys8!!!Y$!k)INvXYv}vR8r{3f-*7N%1#flM=gNLI)+TiOm6L(c zp{Nh_Zxw+I^hB11&@$7HP-9~fm0mM7^E|?;L$2Ws@fe&q^AaWXJF1kz-%irLxx-$@ zlyD^3ff@CWEn_ZJ$BdVa#K(RQhqa9wr*Ef~wmRY{?DMxKbCS+1c0gqe1P5hvhSl1D zB4s~Co&&h9v>&0Bl}tI;fYChRr}8nHxNH1?y?ZrEzJ}^J7eZd3te(q*N)D(~#)26& zM&dB7y6Cr7g~O$SnainZ!KaodOt=;Y zgTQk6Pky}{QyEEj&l8>6uRbug#blsH((iIX!=l?%o6ze-UetoaY?}P~su$G7^1VrU z;S5yLDjsrFdAD%GF4u2B!}x1xU8m`4m&Q1(a-A*s!8$q+n+(J5;6KP%Rt6!IpqU_>9*tdV7U z`$;XLwh6@&^pH^@%{^-rl&~_K@Kaj#vZ2{KxkF;1BQM74B!r#6_hVT(jFoAy6_Y%k z5qvMK4b-5~4b+QHNDJMVo=`z6tjbz2=eTQxY`o`iqnoaPw{da0VbK^|64esUg7NDk zrDyEZynCLR9)R&#BffZ`P0n~VLC2xIBJ>Z&w&}LW_h&=(N%E!&FUu#eCmQp&dtc%X zMn+%KPX|{?Z3je}CxKdFc1(Qn0%SJmu5`H3Rtk__j}F`{a^ej_V1y2itGG3!pzoZoFfCe%nzy4qer)bGmOkG%Z?gU0V9u(dWwgyL8n;fyx~@#vf&-&c| z2g22D;4EE5Qhi1AU%5`deWoz&_X&*hY_pp&$)7A|>1mSc^-9PchgdB~;>!7@O{;BZ zD|()3g_1K^rf-Sbas9|&f$z$N_Lrpxq1Qhlz|F`0!;(g&ov0^zw_Z8(z?JkV0M!q@ z5QoW>zvEZ25PTNT<&!aghZ%yM=-lnN_DO}wya2j4H-^Q-#X<$uTJ0=3^dCIWn@fJ` zK#-Wa)ay`XTCoQ1>kqp=za_}nU3V$}NWlKKP5(&5l|`fVVg~2cjPeX?eXEIMYK}l= zhib4;&*njzgf$2_g5y)<}a}zf30YOZ##1&x?wep%V8wnjz3(yqu(>9=`5LgG!g{<}0Vlv+%deTC)Pcgv zdC?~8`(Qpm%BZ2Q>9)nvcVK9%zkM=iMBiwZI@q52?d&ho+@fh*3KZx$%hS2wmI7Gc z%5+a`2xwHW@GJnTS1WxgCRWlDa-vZyjYS0{^*@=HLxvnribUK)68#Bzc^GcA8*hl# zahuXX+kojg53P4mQ87!@P*m!%Z`f{6EY6|9%t{sRWzzMHMBNIv#6)WXz@moG-q!Sj zFpsM*){eqm_T5G{7gg<;L=|i@6M7f!4T`E1eE40Sf-X%eF#lS82mvNT?s0-($~P8- zP@_bLlN)aqGRM9qPViorVf_qdb6M_VxT@QMlhAKlW{!ar=BF;jKx-GJHp7YhOlJq{ zJLb&Od#hOZ1K5v4UJo==+lW240T0nF^!55?T0Sm(UnJ@pf*a9%RDvB=A@u1ZXY67> zr3h9+T-4xTs5!nkHd?9v;Fq8qMVX^0f^RyNT?yafJPb`D0bL%1K_f9poS0T; zR=%%&SDLCTyM>$YXTD_kmc8}|$Nro!Q$Yu{0#2_tU#Y2hn6;O_a6&xokc>Luc@gF+ zR8FD1giyUV@9iB+wB(Lt61^=f2pi=0NeE`!ztSzo2iY#5+R4k}WZ(o6Kn3>w6xn9L zv)`-)vJ?WC%!vHn_zhaX`c25s(E03qEd?1Lf<}%!{aRBFdj-7w^W5|vghY~oXI|@O zbsBbTs~Z`1xmvVIL*Iw!z07hDJ^r$RXpS0JLm!0eTOwYf!6YG~pjL z@c{F0L&`PLb(lnxp$H4m<8)Z+Uzh0h^SSy4YW3%o0mV(No0p$V9x&)T2jQ$b--EAI z!xkb4stW9MI(8stfgIj%;!-q4)R$$ z3ngW*p5z75!IaOX<(F@c9qg+PBt_zy(^}KlQblpnYZkuxGrIG?6J+E2Iuwii;_vc{_U@7r5>>!y-D+fgFZ}LLqR819j+M#BHB)ITu1oTX0pRWScn+abQQou~0_Q)_gx@tw|0 zgFm|4x>}f-=-bI#CT98C-`i!|H;#q;3Mf< zzs6s~)g<3bk&>;5wLsSQLjV6slu>rY&PYZ=ZBbd}@0<;N`~I$YnNVvnyhVOp2A%>2eE zLXSz!&pL#3@5|=&*2a#(47B0wwOXMf;&nH5K_q)ye$=+zb#zA>k=AdR*4HZonOM$V1v&a} z0W>Z(!O}Ytydc#OJh+6wR~z#>Jv4u5=2Z-D40J94lKcx9{)JrsLa~3L;=fS)Uuc0I zpw8;;1mG;*egKpXT`wp9?py4IMu7;R;*w(-L$+*SCRm%IbCt5dZt9n@#*lnK(k0B= zblHA0O;2X9k=SP^38;gTk!p{McV<2vF3sMeVX$_Bys0Tc%QPcPEF;D`ElRgN3(|&5 z1i~j5t56ZIjjl^W9W0?+ zgHT`}k@U0`+8hie%7i$lozyQZR&bY*y}+=_=ug}hdqE3O>_Ivk|EbV2RN zUWz-K=pB)+I;+m7i;IgBMLM%&S*FV^SSRo-n4n237D7M zWhmUf&mMdZRfe%>lXmAE2i86MK*ERlmnF?)S;$sUxR>os4il;R~R@-`iI>-u?nFU$a)Ghk%z`_SzymmxajeSOl3O8WGW7`@IczUjX9`%&P*JVTZ&;EHx28mtv-z5U z685;Mt;vceIBAP=I?gu3C(*pOoaWXK(>HZHTf9s;7nB{D>h!=KCi-7VfBD1fYC;qb?zgeUYr=^1?caROj7<+Q?qA`zn6FIc*39wdYH zdrpkf8BRHE;tIkOFoh^5#^%|U?^a+1VIqyueU=3Q!4`NpL77v|2nbNvV6XiWemkLR@RJ6oTsnrqIet~A*Kd2aJ8n=S;egGjZqlq@5<{=Q``U4?u9a01W zodZH#?U`kWX8eIu&dn~mSqkTa`NfyaLzU!ibBF@W3jg~ac9&HclY;&j*^aPeF=ZT3 z!{hN5NxZWzEJ>7xumZ*1jmVZ2mP1bqGE7kz3BK>?xcA)s(TvdqYG~q){1ip01GPSZ zcNe90sfmPo$-1*X(=p~gEO^CHed18(uE8o9eUKEzeicg;^4^d&(%rFk-GCV_k5I2{ zJv#(=a`LDX=iU3fM5O(95BdO0Dy2EPE&Xox_f=hb4jfNT2r4#gDZN+C#Hy548AMbP z2$9cH3)3tgfB5fDc4WnWAKdn(Mj#I22=`hKjP;g=(_};)?}rh+kIbp#%TuI`O}1_e zoGZWTk0urrNKS0$Jged)3LyJS^Y5bYw9o2bnfEKgiNPSl#7OmH!mrQ8y~F(-f8i@l z88*uycukL8Y%15#tKGsjHy}ut2tMzYETwX;sBloI^?WddUA$-c&nfl- zl{}6s!)OM$AC8KOp0^c^Bh#>J)UR^90F{9cfE}j;H=bFx4EclfMOvGxZS6H#*jw9EK1PlenJKYcm#{x>EksPcqVSt}bjRJpgm0*Ps=m?wh#VS6 zN4>11>5NQ43v%-X3yw0u5@hGGXwj>K!sV-QJJ+9|tDM2;sqQt`;y7DK?{O4JG&|<3 z14)F;rd!>?YTyK-V=RlxY)l>apfFXBkWR0_Y7Ta0)COI9F<($Dvu~JlPt+QV@=6?3 z7kL3p{SLt9BJa$PdI%eG=+ttvo1?~=x)N140vFp2N8WUse_G}fwcc=GpX3|~v$Q~o zDaUomDl8bH(`z)Z=xktnITR?#m=n?H#+gk9@I(Wv5FoLhm`i6hoip7SEzXd;7B`2d z&Z*=&$fQkB$Z3h_=gH3{8|Ad#ppe$KH4?jm`e;;LqRKVxdz743(hc}=aA|4F-xkbx zC8U_@#PoHy9j<)CY{zVTFONCiw2#yIq<}gacMBM2thj!)1v1IGN}x{`y#~u;&#m zv%326dP)53(ag;&jgzA4aXS8mQQ$%N0_ysmxJ9F+M|re14K)`dg^(*N}aw zoPpP~&9fe79mQufdY`5%0t_oqi%lLnkaYXfYzTaw{MPed152;+#>u(${4pOk|D_kP&$QvxeC&{TZ!)ZJPj19s9Gw@z+!jLJm|D127<9O`lu@z?x} zTiq(7C6(_rM@efHVZKL3ma*}>;CqUgC6L{Z(a-J;6k#p_WPV{i&YiO4u|gC?0mKZV zMg6rbNLbv(qKiMPhM$g``k!ZgkuPGj!Q`Rg`yGUht5^!u{t3I;Pi*B~VTj*tgMoMg z_FaM0A}Kk~pZa=KK52Z(7UEN9`ty@Z&Y~3Vt%Ot|92~9V4YOd5QP*7#O==28?jO2s z;Gci+v`|~48p@i<{j)>y`&&1X%|4LSX5uqqk8O}Yq?3zu@kj3XcuC-GmII1)gE zooQ6UIPtGW(N{pj6}mCp4eQl`^Al{xLo<9|w5%|@?yQU95>H4r>EFc(_c!vzPvd^W z+$afh6#WVd9(^*x)NLnW@$Dl7g}@VB%M7yUq#N>m<@oWjUmJ^v;XV^zRv$#rznQ%` zZjkHVD{Z@`;Ew6AMac^?e%3?wbgd-DXXiPBOq%vPq3Ne8TIK(Xu(uA1^9lL~VR3hN z4Q@dbAPd0>?(XjH>=GonJHg%EHG~9rcZc8sfpHS0M1n?Qu1qW+L^XPSe2{AG7! zR{Js~!(M}9>rdo7-6W|Qv9?|C%82ph-U2T!7Om!)&Ph)wr&+eHlM}rT@}T1#(Q8BH^05QZ&GkU-ZbyV;VzDR=wMOY%c?TMPStqbB3R6KgHko_Ds(j0jUXcp z$14;)!;c#(04Whq46G~APwZ(d;NLV4aC>c_UG7u={x7XLwJ$oF)ofq2`9>>POW!0E zlwwAe@`-q8SLGd*e}BoilwBUB!MTsmUL@yErb(!GQ?o<*k+zdQolQYz0soMtKH+2x zYg+rU_(|#F6A`j@*ODzwrN0{Fl<)T489Kh9(3sn27s|_|$$lkPRA$ijx{zC(8CIs( zMAcr*P{#G-z%eD?#n+6n5af;R<=bRG0Y=RW|8DMj-~IdXi23A~Rz^*uX86B*{{lGs zCwgQu+JJ+V9ubMPhN+tvx)hPr8YkxR(|Y%SMp=uv;*(Wn7C$zF%{*1evf0t&LdpoG z{Gvd!`mJ_H&${HA;`B`n7odZN(`x)`UhbzHZT|d9Y+W`7ffJ?Jcss9wZra7z$W9p! zmhdNej**D>N*uOPeyYIw%&XEppf|cLZoi{dd~JK?=7r~P4A)H>nVXaq2{`Q(nGcnT^reIdoc|G^NGX^~lHR8cXcq_rV>RV)Pdz$1Iw3 z7mUX&j|>-Y0UEk!9nv;gUa^_bn(jd$o%l-q{-d>t0s;o%Z9m2&DlREqqL!QaU7~cf zxH)_P)@jGGy2e!him1@asM`LQ z7)ralcO}(OQh@VHX^CAoDLF+Xj{XlgXcywVWaD?JSr zW*@rcP~;wdoD-WJsRlcQS2Dlzzh0=2{|`4*Ini+%;PSYdL|n}uZOQ7I+%oTD_qvkp|{}E|gJ>G6M6XoOT8#o3!=o1jyaM|##JyUFyqTWez6vBeD z$*kKGaj!VdqcY$XnOaEOqtDS6ElyNVkNQBt%{g*}JCF^<6v&3M*9jyd+Lv@-HsSjsQ(o0BC+Et(S@dTy zb9j-V=P!;7W#e$V@}Q0AW>B(nBP5zI$aRgxX3TKJdKz$`94$;;-tXLbis)0Wz?^X$Nhz>N}%@ z=Kx=VF#;HZvMBCadE$fPknQ|9?s@6Usg`ritG=yqnz{2UrVLJg^Poc{?VVc*rz z7I?#mW&-?#fpfhB8CAf-;^teMIeGh1%!YNoZbIUE!8Dp3g(|LTkc@YAR?re3LG%S# z$k!z$zI&*UXJhp0amP;U@rm>!?PX+oz2#Lx(S-q_&>}z~ggz^;h4%GV`mpt1#ojCR zIs6Yl{trJZy1*h7y8I9S^B;aUXW=A?%NHZN>A+@7n$&}(Gsnvq@TH-QxDDsl^%L-c znq2G}lKD}|Zgv6!wE=jqvYlV+NP`+Uk23EKC)i6b#Lgi)zjuGHil7CO2XN{cBfYEu0eyS z%)s0wCt4NabI)$15zecbw3k)Gr!V7&tz#tl(UIL8<0m_ZYW3Yzx`CYoZ)RGr`lkSU ztX_ksRBLz$*R1rM;=t$645?@r-5Wv5jP!Gq*yuGpa!w$&^Qno*XcqMs+pkQv z_Lj;8t`Mt{pj04f+>yW?{NST^=TXkqQZ7pD<^R5AZVC3k^(wvW$qNFRxof{yLtemVPI>EF*cvVs zM{A5Bh+UL#ASca@n1n{}P`9**jmF+aVa@~#ufrUkf#kW!F>@X59p%lQc7k7=?@HCH zNWSK)h%Kw@g^E%?LHk`<=^-i_!*N6>?Oh;EKQ0e2&j4ICc*zM!_b~1Sqvf}dOV zfwdfEcNw+)5|HiTyt|CuejkW-fCL1%q|^-qnc6)4fdK~8_TAB|dh!0eg~f;w3oI<= zZjrXJj@}Q=Bn^I6lQ)yeFj5+oL@7Km}D zNp}g#ak=>rtNNyiT^)4I><6ZZpX4$A`xy*b=cLjA-zee_M0P*{k_v>X|FN>kNPlGu zU)klXS9XyHwZg(5_eDoQmHbt1A%4=>`}mhNI!RQIr}RKA;QhpX0eC+t2C66y zEIeRP@F)d> zY`%IANk{&uV2pbWu@Smd*4Fjp^N9xHYbGMTuoN|93b({dCsv~9=GXtpwY^#bB5M@* ze9!}(z1>I3=EOadq1b=Ng;hS|&q;7W#8-mD?Wt(KgQs921*(KVWWRCqb}X*GonH4{ zz*Slfn|{?BIp;Gnzqb%(DMARxIx4ls~&B zc1h+l?l;a1`pW*UjbPw>vXZ1dG zAA~L+rth5a60v~D5uRMCfPc5*x39<{ZPgo(K*B3+ecy9)G^OUkRDZ$GJ71{+20hLX zpCtk~`DxC?%v-t|9eil6zf$3q|MZjFx-MJ{b2yxQP*GXe2O8^k`uD+1E7e#w+_rU3 zn2q7CHvw0fF=ov7k$Dy~lisib;!r?bkLB6uRz%NkT_$l9db#^?PgM*42-gp)T{ z{<>zl!*O|+HV0DGo^?;E%_r-pObXkU>NZ5JsB(1eDQdc7)h#prisH#F?yAMS_RhZ2 zO|HOLHsAey($B-I`{0Q}6NE$3{7z||gQkd^wlTQ$I`zcXGI`>RCVUA=a<3yjg^raP zh1SX$x1B=@B0g0j*f}ke((qB7KT$@;mwIHwhqksf|Az!Of_mN=)GW z$Y=Mr6;+C@s3WQ#tff_Ytt%t6p11{7)^9XMt}thZnj03r^SZv+JVBn&P*G||H{}u#zIn)`Je|E!rMf70?LGUc zxgWTC!%z*d2MY5tojpY;WaYckXwaFX__UYcpi9_8 zk`>~{Ez8t#9PjeRTGyvmx{FLr?AJ~7U-a=caD>AB5>skfKNC>j(-YMDNcLUJ-c%$rtt%% zBs=dluw(YL6r0kG9I79xLaZGiHpOyw+N=?}ta|N#=Pox70SCRC0lRMl2OqG>{6059 zMOsYEltPk&trwmmZOFrymhfnjaDMo1a_wg<%r$J#C6cIA-BGCJ*eI}{1PmryiJ8yA zy_P6WL`sCwXrJp~)pAg{>)(KX4J?J5b`K6%>Qj;7(H2oiENg^B6G0O5dGq~gZ*FoT zLosXX`PgFPIW?;8w3RQ@TP?Vo3m@!H%N5wx;^!@kkl1dGm#6&)wBONQr5c9Eh#1Js z4~cSr)t^Onmg;Q&F}KtaBZs4kRq(XG1q3Tr@yW;-OI+hzcX`-(;LZ@gYI=r*H#^z{ zgi(L1V$LRB*PU*HtjNX}F_`B9g%hUtesc@`T2~9zT3{Jp8rnsry@w{~5BOT(lXNfC ze7_V>zH;N}nOx%hwxTIY51}|=ZG@TqKvT~~^bL)i-n(*D(goRqnGwaB4<65V?Rhv_ ztBd>34+!X#n@0_*FkV@4msd2? z(jQ&oHe&m@;{6lxw|RfBTkg-5co(KoLgsaGmr}>OBEbRZA6mYNN;&gwzOqgq?Jcyf zMFs|e^2bx}SJnt%N$dGGiD*CZPff@5lpc`qeUJY5r|eJ_q8byAIZ$9VS)4kN^Mqg{ z^N~?T&r?XmA*PYw0Ymv$QmoP2jt~|db5z>-s=}IHYfkVv!{T2nnKv=%^SGq(G!?q4 z5~OrIpUDqN3A(My_h~%7gim2IO3YW?F5OOm;ArH(I=yt(?fYhs$)?YNbyQ+>Vfq~c zl4ht0l6Z}@A)M;yXL!2`QO>t5U6XF!$L+fD=<|MD8J#V z?j;`)7(T^Uy!$O^LNY!QX{m?4|LzNs>0Q6;7g5g$Daa{D#-&{vjMJuH8urx+gZw@4 z0Ncap@j{`gHQ-rYs~RqBVAc6qrms?H*q+#$C#HoJSXG<+EZzw<;78UNG7#F;^kZn#uvpQWM5o ze*B8vr3I39b*+}Sk(J7Fu-mONmPLx4qP#5()!YKX@kmlKJe3OX+rY#P?}XB$lON)- z#qs}neD>@K55Zg~ro2LY*{Q6Ekf2B5iH7`{xnt`_u#HN9@xl^xnxZ!Joj&P~|5EdA z(QkrI-W2h64}Ixk<;-|S#t~kQs!fHJ!n8M;H!*YCmXGR4pi@-$%?jVV@7zexLbs-8 zQ;(D^+ZEaLrDn}dyYby;A$en~avcAhPn)F~qGaQuq1S)9mF{GpmP#MdJvToddL~2G znJ&b5*1MJR>DnWU*(2zB1J7oQCT5GnQonqvRNmG&7LfNn-1ydKTIs*S6I;T>7+Z9X z8abY+e0gu$$f&;7yHte|YM#aC0z6gUUnQLda7h%Xe!crUZ8pkp_u1RphI0wC{kVpD z^~u3QEB-9It%G&wmeOFIz})Yy<{TB$&|RzLg|NJFS=ss7{u(rAAlA|j|0@3s2go~2 zduMGrA zw>9+u4HOkG1jUM9Qq)n=Qc?6`^ubKkZ^KRneu)~*cl~IeI14a^Lb8hD8R+qKhWhe! z_vG{GJ!_9<*gx7s{*)M&M&FK~G8euGd5z?G-3wbJ*B&X7?B{ld%uNPA{uYTXmzS1fgIkX$QyP5YlZX>JP{eLYOb^fH zHMaRP^Rh(ne!dB=kitHBoC(NTs1YPWN=BX8;K2T<7b7I0E*|l!nB$UNorYT$`a3vY49ns-TOL`x)`ur z-KkVGn`&wQW8?<9F8f$Lr%Lejr_Y(^=mZwTHbm@TxBnFigo3BiT=?dqDKoMUHNcLD za!WaO1*f$b9vZPfjoAi0VVB54XvP19vDH>;n{)LC;4Czz4t7;z*#97A=YdbC z_h8x4OKvQD50k2Y?)*>LD&Tc0Tuvm}scLtmI~SS$2vuCG*BO;tw3oHtImjc^wO zrff^+BjoZ-PH6mJan;~`UmB7}Ij8sL-7;E`f$xq~arM>Rjf4y%Sma zuplFk$gF)bzmatu9#oxKnQkRi8T?@zPGoVf(R7js)%UxlBLlExO_{mQYH_G%L=(*8 zMTu?J1DR>G)0NqANl1>kokkguT$*L@i>F~?tg^EqfXN^A&Myy&P?xlM}E zoFvDFG(<`ve5t!m-yG#f4|}N9Ws742~`0Lq{ZPGAj0g1lFo{XP=d9|DKA@3em8&ko;${4Tvg>3yYGCm+D zGgfP=FP)C3WS4+uwT6eHHkA&-fkQHTX-gM`!{?+!3)IX537~dp?#9|#m)*NoWX$6v zW8T%Dd;E=)>KM;aQOe@?lZr83IVBukb^nSbI6kizDO%~NA6kY!ZuF+w&b^2ar1D{%IXn`%1w6eDx zZ;mwZuC6NZ-0Qu4=b>HQ$1%cP|Gk;r~0q+ z<{Sa5YP_r86?ZKE+fjE3)_((4zy-$9dMeyy%O0_SwK4R)a>4aQB1b9dWmj5xbhUE9 zZxvGh3r^s@+?O^I4d21)&odg1`^kZBmDL^vDcIH0)#^6ub_^;fcC42Pc9Aa}ME~c1 z<)5H@&m>hSyq~4TLCyn4Yc&t7G74NOH-&>qrio&hP;Jid4EzAQJ2Vx`0iZ1s?_fkcdcfv|Cp2(JC`*O7puGVNPwxcrW z?;Y>G@P|C-H)hlCy1H1x$hq*inA&^j`XZRX#Y`8Ox0LvJ@gUvLZjXU;@9q<=k1=== zD-dZ(2SmOTl#*yvkP%xjUZbg-qrvbfTt|Hat8jkFF>b@ylGBVX*w7n@KZNKPbP`H* zn}w0Pw4op~@4>}=Z-@D~E*jg5f`dLgoxNV-7_mBd$xp)!zHW)zonnugodVtk#QS3` z9kief4tL;rm++?6+_);0)CQpD8Z9Wch$Dzup=66=^nJdL(CUszpW z7E0`@iE%LC!I~xlPjuU9tuQ=Z7fkSmS#B{$-9l+^|80DoD$#UOTtHW5D&#;zW%Dj1Du*@ zomdNY&R1;kL_xrU71UMQ_=q86-NPSz#S4RT%iasuZt#1_utZ z^QySYa!`5tBBCiS2;aV_i*VneF{zE{3l_ZL-@(kv+dm($y&tITR(5CqQE!>NWs?-m z{fh*P^^fl3#Np^G^u)I5ua5M`9h&y<68>I=^B;2%{3ZPiarECprN!J*Vs-~Y)lgqHpj z>-+wX8vI0sB1G`UI+{D`1)RJNug`$>4=yO}A8hIB>xi}?Rc>#EU$8)wf2BXeth|m0 zfSkgW{u8QKH}-j?qBLF(0L4iU|8-95D*{oajmyKLL8v1*|9wYk7Q}EQ^WM5aTT{XM zxBEdUc=Gx?jI%{ebU}kBM~$?>2OKg*OwP{vIhQnQF$vl+cQ7F?B3IgJLZm9s*4aEL z23F|T<Ksf_X~kR}7MpHGM+2{)%}4CH6_978;NQf)iz?uuV0iix@$;RSa<0 z$!AzFv{k_i-$hYr`;-084SSl%oR@c<^JhOt=6rYD*sS+VwylFFy7+_kYnr21JBn*s zao{g;!)Jn#Dp?C?^#a3Q_uqlPE%BA`K1Wxvc#!;m9lvw__H-JfqJdBn?@6}M5VAr$ zgDzq7dLBE3a{ul;>qEzCvl2*BjS&c9MTxk2VSKE6TXILg-dv%7wg>KZGks?2;?e!* z1f8`B@`1q#o48Z8OH2!;WRE9_m%d!rN{^R&ivg8p0r9MTyR%Clr%vt)w zH-M}OnvBQ!&b5Ec#g?}D80b?n6@*1jWNjDzggp+GMGx~ghCLCW z_;E-lyGOJ|=VKnYA3Ih%m++7x#M6r_eE`wg7RU4R0p%?bwj~J`v1w5a@MAz=cU#5`r^dv$){?u|Ex|hQw z`JdW7Q0!?>&|;yY>(I?r<9y9_&bUv&*7C&vOY!4@mLt$3Mut%a%{43c-ppKXM}W=} z{^^$v?vx#F3+e5@zp!8&a`S__=c`oU6CxuCc@ENK3WDDiiqE1nj9wW9ez(J&glLkb zhfW0}^uy9m30hRL$Eo~~EVbu@-&1Lrr~XaLoTJu43NrmPq*>{fu{{jaG!MgM`W7hl z4b1V?wUUBxPt&S3^Y1rxc#dF)H2q*}rH3`$IMb>R!dUgj1M=+o-ZL1qWM&U==#4A- zrBz!JRg7vj%8wE@5Fxgdci%HXSjictN(s667D_rV+M}6o6D~v!NC-h-d?FWgAWDiWry9%`xV{M_gZJ}+*W>E#t>N8cOZJ0Aea#jSpFBX5AiT09OltpK_h*2;11YNJ<^vXOMKj$yCcZ&zK^HsgYRLiZoH|;ewlH{joR; zrY}TR4V2(_6V-GIK}WegNx~B!`LKA?H?xW&r1cyM(gz7&Fyb564)3d+n;ICN10Kn3 z-t19ncRXjw-yhrz?(pKB@^0bNKp)-|gV9qBCn$;(#9^+o#4_Oc9r8cRm3p;Fe2L$3 z-91!{L533yfz+6z8Z$U%U-95Nzkgfjk3Lf6l0nWVMn)kAxrDA^J@nO$T{A7yTH@ku zjawA;iHC-fFsI+l%+I7+R+_Ur)4{);FwnliyBU_ zMYx3H9>%-+6QycSQb35zHvYAlc9dClLB#z~)ef`ztegjQ6x&rl}INmP;KAHKGiRsiNXK-L3$)9VUU#$e9klw1_4;G=5oUG5FdzqJp{#@{B zTpAVYGbu+FqLF4>E-v?np8q4_AE>i^J&KxZq3i&bGcjESKBnZ&lQ)z}_y~Kl(ll_a05;APUAdh3Eia6WRl*G!P;Tmb$W;3Zg8Kh7* z9Oz2J%3=NXb_k5~tn>|LIP;D#*d$HZmN`LK0zE9Er zg7G(+zdgg4-o;2+>Yra@`xd@X-i8rpHF3G0@O3E2NXk3k8#~ooVlQx~FsTV)IPfQG zs?C;JnGiT4k9W*D;F9uDZ|T6teCZQ?@mJF4tl7bmaO&hIm@>w%b_>xPNbwKgszaH> z^K+CgN&-cfDu|DuR*YktNzSP3T@bQzb5eHV)FeV#mISX_>O{~W0S++j-=VHr;S63us3eD(g_}~U` zCm)>oAkvH|j=UOzcIn(2grP>`2yjjRR*mSWqKT$)!XxIa9pl%M`a-lEQu3)v@ zh9~{=WX^DW#;tuuS5T+f)y&*Q*s$Ue+ELtl#*jDG{dI=xi74Lu@=}?TR*mMrNFE(i zKMhstGys#Sa(rfl@+uGLZ~y$C@r$CRg5M$?F;`VtPF4YE@#rZ15QpUTG6L3=rx{d- zT`afK4ctuNhMGcgGK(Q}8i}_djz6mcIYF=whWvoL{~0WZ@)m~M$E2kIkFnt1lsU=6 z^1K#f$T^52GP=T+RPb$FdYUn=JW$CS{BfD5c$3Pv`4=f{2@==!g6C~G zJCLdU`t;o$^7JuDr=>-oO}7i&6}K2$x?Xn1Lw%lpNaQ~JjuNOnI3q&aK0qKhoD}$d z6ZOTYYxtv6uePAv3ldLtc`mM{_)XH#UU}dOj`#f!@r~o+kO#wTeH6*6Bngugj|NtW zrU_2MbKO=KNXYqu1E0x|N0yq5$GRuu*7jcxM#(@C1(i9jH zMIG8>MX}4%kMXUE8=*}I^O(*yQ2ucC((1)w&V`n<8@`I<0jT) z=v3<|{%EU>-ASx{I_He%5uzpsKh|)e@O~AP=Ltg~g}_xH8NE;bD5FJ*4wgrQ9tU9T z&Ed0zQ+!2+`{O`Z`_@RNZB;P&qf`_w-0cBIgq#tIO$%M%64)2!OXd?s7bU{n*1-0z zA!Zu2gwS4?AM#Kwmhjj8K)LjTH6_}&g- zjLE>XwoGph*)Jth`XkXj>-Zv*ghH`IO6gcc*%ewL04#b19})pDP$3rbOZtdn!!5(DF#=gY5)8gg(yqf{h;EKDR#W+<0YBu4IjPWo8D)0lNkIzoC6tHRO+Ln1MkqH;w&>-RghJC zR8jsaLfxq-ur~IF+^6MQIxaf;285~z6pV~rk1NKuj|8EP%+!VD< zw_RwaU(JKVR?s3RI>rpba{#G-4iyNzt0x3;X-Iwtfs_2Qa%q}zI=YWvq5On6f|&d^ zM{o`^V^xJOV5<`zJ}h$o>-Wx22KX&O{?Kxe>>wE0DZz|N2h;i%mPfxwvRs8I6bEXF z20MfF*~!*+PSONfS%nz(D#|^w-*yH;kIb4(87F3pNS<=2l<5>@Zt(pvGwOArZ7CBZ zS~PwaFQXQ4M6l@jRd^GR%w|+LGsCi_|Dhmxh@P-#hrV47i~2-<8m){p&tc2FwJOwM zAO$YlxY#ds97p)SfFX$5Iq zB_L`DGY?=4y3x5*8R4=0B3`*@?FjARy(x9n>eJn!G|%M}D@#hx7Y(wwk!>b^ZuZxb z8>v$BXr#%b$omzQujoZe06Z!M14fqifw{?fjk1brnqa95&k?;#A^%fc1h1~O=3U5=|u5k+pSSK*60ogt3FzYKU)(C`QinvCzCJb*qnwj_){WVO)d?YRgE{Q%2!uS6Vv52Z49v#}L{hKBUJ zGw*Q0Gj-czmNead?}E+hguo7iVuB#lV8_m{-}dG!RetnL9OJXaV^U+x|AM*w?~4#nCuk6mU&AyZyX8p_^}Afkgz2YS&6@w7#|&Tkff!K{DBRhMTK** zW*gKhfrlmKa4jOsXFQ)n-V>e)z=SPGbOHbLcmf&5$Z5ms&R8QgDQU9@4tO9n4FvE?*CkbpdseGj(HYlgbMd3fs9YMY5HvTpoRbj&bB3=HUVN z-430>u$Y88gu$yZoT2|1p$4a>p5eBQ*|8*rvXj79@I?;Y)*pUpNIi`xJY^N^QqOu< zKNQca81`hc7LXZ?TDNDxGT{vSA{$t~!;t!{Dyhx(P#ig|eI-xuqka#P#&T{p%&Ac{ zlxS43l(_GpKFuT#NNT-GcD+iz)4TpCnVs9G5LjL?kvgI(c`n>12F3#8KZ?B~j_SA` zEqiG!$ES=cwB@f_+3bMUh3?fT!rq&QVpNXzvg%Ni7c~{DQM@uE$01Hmuyl6rtA_nD znuhG$@)bozdjom|P!=N4m|Je(swis&#sSFxDFb>Wdu=hR2pGp-SqA6SdY~xM*YE^y z7`OAXZ8YIGg_Y)2{SUm6Hem{)f?zxpFLY{_F{q!m1R)vra_yxN{l2sL?GuO$lik+v z$uw-lLs+Oc2y{f^YS+nFlgEn3G8I9DHU{TBV%yI(Us4>YOk)dG#iTA*BZ*=v*QOwi zv_eBi+*6SkQ#H!j#|fndNrTP6>)c;tNwQ@M2N~Gl;|Uz^Z&WGenZvT4Aeizi5lw-x z2EN}I(G^sS{o$oHO`#+tWrRam#>-Yg_unaDQjR*k_89&a$*+~A8mRH_Q~N(O^_j_G z%Lp^@M8qFyy;u2egV~F~yTv3<&1Nv(596u3dKxILZQZ<{W4O<=sY)_5op^+|PJbYhb%*0BjGUEF59?hj~h+Ewm4CZG(|U z*B<-!+Y3*{McP$K2vAc6An6B3GG(e%@RX!n@RVe2D8i|L`(X||C5$kNFd-MfuprIh zdY4tH$ZzFeePR##GV-Yz0Mq6H@Koy+w0H&U0Pt0tDe6uPzye<}{1!m4btzG`%-(!- zwmvAUFBpmxG&teigCeZ1*=(^+y(P9KhO&YM!b)jBgB`={MG^KCeSny?;S3xAt*Fkf z>*G*2uChDhd6#|iZT+15lj?%6bl~659XcXmeSPEdc(3e!g;4aqBvhSw@uir?pe$6K z6b)?_^R8=O6&fpRoVx#SyU)AH}ZDtO~KRfQ$SpCcPqvU*L#b z32X{xK#t~)@SZe$fh@Sm-=Y~`lN`4@lg%EyopY1?0v)j`OF25U7yVfMN!#k0#1@ZV zHfd5h>$g&-f7nP`(zk=R>OB+ax3N7}2-bBE=qa_Ig2%0_{f9{bm0kZZ7e@&g5eE78_%$lpK1Ffrpd^**8^cwy(0r2R>=cVTykAmfR%ZD*Qe`MiWXj?qWV30A zbaU`yaN)|66T)5zYawA~g$o34@AugH{&j#Y<=_P+{>-VCL*69%4lyUFZ4#j*;MiZO(JW z%sA)D+#1i+9QT)TWTBaPeoh!XO-Xilqa?2g)KUgpSeXxc(7uXzvR~&iQ@nap7D*$f z-6x|qQD*(2ZuTL+a_M!SN{<{w0B)j(AO~gG6joQ~j(sAt=lg4Jxw3V9hxL}7e6nQc zAJ;5ye3L%T+cVNy69Vfm8L3e3h+j}EgN7{1zGcMM)v0&7&CBRyO?Q~z?ZZuw^xHOO z9D^N3m8Q5X&uJ~ke2MSv#RS>ELd2TN@TjW2qK5BOGCR`!bCrt!`FsM8wI`53EQWkx ziI>>mVSZo+z+RON>5c2ki(DPh8{EOzr{?&o-+pIrKk)OMhqY<^gIq?YoU{aYp_^qn z|4P#t25;-i_0PO-pD(_v2X@^RV&DvU7NvmDOX?BG}}16(g;_3 z_81ej6Ws%Y6X-zaEkYNBlE8bhBMoVz*|W{w^%2XQZe9r`t2q#N8T)pYqoh%fiMwTe zhUIz_EQv1}6(tnpn^)OSCX+^7tK9aXSbt+}6ZwJZ0R8e|aI zH<8zfJ%N|Tj;Sl&AM|6T9@=;AQ*sSry&rD2h%=1DYGUqozBgYQZV9>y^w{nWYB@aL zSHw^mHDB&l@(23Q|JRbs{Lj)iZjG@Eqz4BVeHT_`=>>;gXh|3$a6|hdNIM2mVHj%= z_D@VD|Ex_Kf?vGQ@H!~Ho4A(m5F=pAIXQNh`$KA|DcL{m&Gg?;ECV~NL(@HAhefc{ z7#gv*d%rz1KH2sm{vr}t`A!9{pJc8aUfX7mNI6MzyM+%yM{ZCImt|RtPV=ZKD?Zow zG_Cd@3y}svn@L$c>Qpi&nmOW{!deSNGG$)6@BB7?t0M)r3z2@b0mCCA1ct&8d8m7( zT_xlI|D_}N6l-fuwdyCzwP zn9cPuhZnvY>a+GeNWl3$M5ni43~&xx6E9G_!wl(`p!ad;FY8*A%ZTUXsUA`(R+J>L zal#D(eQ~~f3Ezb7$LKntNegbUZ{qCx#M%!(XB#9=z_DTpRb5-ULGF%rct!@TI5Rb z0)$oy^1(TWW^yp`H`LT`r`WJbl;bKK^a8%=`@+55&Pi0FKHln^DHvoW)sfB?Q0Av@ z`2~tSltfEm2E)%2uK9*Z_+{$23rO#8y7VQj3<3@5w+;i!rl?6P9Wz7?a={ z23p?;e_}*}A@TzsV02YPVAD^cz|~&cB$gSvpz)HKLx&OLe9$Q&ca8jdo0afV@X(+Uz ze>Xzv#8k4hiyb@aK4bWmz z%B^R=I;C-bAgES)AFt$!^Kks=%joJdM2HpUgH{#K^JxPl(dC53cDOo^iKq3T;PGp6 zc!Rqu!!dz`dgE-JxYV-79hCdVv5lo_Lit$)Y#dth2pbNWtH>=Pc+8s`tcjCvOQ1GliPCx^2iGpbZ+37nZ; zbcEufEwfic8p^B3^QxSi9=MUyztZwm5Z@GUfLPYW zJR#=J{-1^)i+fUN087xhi}}jxkfq!scOiCsXTee|3BpZ|3+_6SxS2WOR6#BPcy+Zt=jd{BQ-DSKXw!3hsgZ zbrMoMYp3oY=j@|HoFKPpj1DvadUvBwHuXi`w`SksNNutimgHNcgUK1$aXTX9tV(^d zxmkb($e|Bb6BKffTTf3pk2ZUzx;1L_UPgg7(xrO{o#<`y6!n*w1Ug2 zSYD<=@d+C14^g`N5-DID$HaYM?FdcF?h0AVk&~z_jCu~RWhlMd5?@egxP*n))9`+$ zC!%(b9gUvRgL3WYCPx+h#ldg>U)ySy& zIXa5XsqvO%K`m^G!%%HggQ0(AD$U_=J?OTjNZqT(N?b5_GZXZlH%!ldWRkwQtt4ow z^jp3%Dzk_`k+A9DSd>cWSE%X^)S^+Gi>;PR8YlAKP>VnjQCxP>(y<`MbBZV1hN2+l zU*mpl@#tEY9Y4qCp$pz^+3TmV3?EYVD(3k^HsENdf|JpmZ;(wUpuFp!FbSJ5cegQz z;B8mGp+;IG4zmn%>yQ=<*B~rH@&sT>lw7l5tBGPuau`R&p*Ww!XMd45eqvPfbdS|x zOk#fD_H;i4l$?8A;UNRURBPMhZWyocccM?s z%o=BjCC{v4>?WAOhFd2ffz*K>7Dj`s!0%o(XOttko)**YZ8EZ@t*OIY;DE|lNciuFfC%?W%w1d0D&_ZGq1L^f^#7d5r$F6S`+Gj?J%qeiJAcxxN|9%O0`4qLq!9U=CD zFPeaf!m^(J+8SE*{0)J8w}$L(#hy=erz3hTMiT~;EWPm>7-g`{4|EeKEj!reR>P5mFWstC>MX%iTg&1m$ynKQ!lE9C;7TJcaitQqvm$5T(5dh#OMLskvk>&5J}1d zBS(fTJ{lB8C=z#bfT2;D;Zi}LN1hc?K1zxhSw?_bY8seYP}zApRvI{wj5i0Cw45lqE*1oLZ+)*=T&q()As+O>Mi4<{GR{e-KD#` zk(LsqYmx5mM!KXy1a?Vj7DPH$>Fy5c?r!N2Q9wY#_+Ng$_wT{|fH`xnGuL5XSDiUC z@0popNgZ#@BYz+Grm=-U_olRZG&GQ>dTtJ6x^NM@M_;a2OJ(V22AtdgZ zu8OKt+i;bEw?P6^SJ*Yk*uUVP5~uf=(Wr6$cH+wtjPa?R3@cKA4agNj8vI%xlXH#_ zosEVg1TE|9b-bTHJ{kx{FnPnF886u=ug|hVkaXn4lPO&f>9SNl<+KZ%T$U zouiSUvi)h;4$wSV!fqCijQ8QWU*(;qI*jNM{b`_%a(of@Y}efGnatPIDqQlj{or-! zg5^~C85JHC}u?{@j6cw8(%WJ8L9{0 zb>gEa6(>Dh8t*QiwM-0)X3q_=IbR!46|uuIyQ*VU0Bb3qHv__D_GFyB=0ZZ5& z!>s9qHhr6>IDW}AW3}=+e%AEKS+m1Z2f zynh&Tyf4~kgXzo%Z3ZcSL14^}ywD+^fBAuBVJtB&wS*o=!Pzi5>f>NluoxcKdmQ|S zRfD7z%x1#6Tp^|yRO{RNFfLztu4L|?ga#zMW0Dg@ywzws=0euEI=^LDI(a~iVUlq_ zcH!uSm7$iIvJ_*t^%l080+vx<+-~qO+PZo|O{lm?2w}^GmC=H^5|~eo+vm;fY36wj zpUBLi3gT9ebUA9mZ?#v+2XClJDVfU|MED@Lt))NV_cy=Y6FDz3t6A`bJ|!hHGsTUJMlhM@qKe9l7cts;xK8lfQ28 zaLocISZrZ+I=;I+3rS!k&a0fN0D+{Qk>kEv~m1-qsjVr+{{@=f&~N z4u_V0R0Q}Wi%KF^JPBU!|MBLulsrfbC4Ndm44Z$!i7cwNOE86qxkbF##?o*8_=1RG z1Tz974(*Osf2do1D2BNr?oHOWlt^(YxJUdOIzT!9gWM1m>W_^;FN%d$=*ZgS^L~qB zLDvr%k{1h8aW$jzY%F)V*`0_zsu1--yiETLPfSt3hmq4fiKpe~5mqD@8#HxG;P%#T zfvr-S9PoQIKWi8b`|R@4E=6u=X?TO0sGJxh8-)&+N;s|F}c= z6FkR}Eb5LVaOS&|TgQ3J7Tix-2* z54R@@S#maO!|4KVVf_t>ieti~!lCcQNRPnVE?PS`9QaZ989p471Q~v@f1%6L9;)(I z?JA^r$0ZiNAI&(5Em6pgVoUOUMo3UfW-$?At@vT}f1dEYs#Z!JWZkSD-DMq#e53S8 zSfDR6$i75ysd6tDd;s@t%$a|CS9HxJ?VaB#q_ry-Jm?Szfh8*q{b7=>hs7jQDttp3 zO7PZWj?T!Df3~#Q6z>Jpcbb$frAh-k`^5@~Rp06;RxBBfS2d?B^5NVslx%w_vVv-U zauebsIs8|jhI7OSpJbKLfp@bw)E9b|)%7|^OPtxET@oeEe0}r7{2CJAxWbfI;PB!S zn{0nbr<}t`ftxQnV$@!^xZkcvEVk9w6d@q|5(Ac zsMOI&Gt*dmQ5(bwMr^WV+&=3LfeRa5QXR6eEc%hG>K^wyCSe8-A&VVRR@yO58T1dA zB)2PUVJPT1YcS>{9*8LgB-oN9KgQXc!u?B{X(R?_#?wcPDZ$#62l<4hPPCiNf~1EM z{e?bpB-M$*_~{H*_hW%>>-Z!Zmo-WUhg2dKmRb~ivpy0U*dyg6T#d_6y_wHP<{wt0 zeTktfSu9<0y>}q~o_Khq!g5@M6i%<3TJ31|!d34u78@`Y3~KYZ#8D=IFQ13L4)c@4 zfvw@S?sP~URqR|n&-d4{yJoLNe({PSu(lx-mk2r}V!--NN`1iNDMX92HdX_vYN}M4 zgKY8wyFtP;hQQpLrrd;- z+ICKA&PeUIZUp3($#64ep)T5}YXi>%*kx5n4|t=Osh%09Wy`>JiNdY3a&TN=)!!&~ z$+hmhhWP1$^@atj;cj0`r)t%8p?kplyUduD@4813tn2YGNuEWhVCR>0 zGaBL4fhAz@8>?DEyFb@Qoc=8Hzsvh%J}Q2NRn*qLzJe)v zo;~yuL)Qt7j1WWUqo#J_sShJ>Y))92130?hFMEdEu9Vy)qXF zwWT0ldRYXPKs~*+|EA0^gkAo76$gSUfHk3EG2XL39~~`n4`JkEgm}Ifhk2S?9No?P2hX>Lf>Rd4VFpg4| zeua}66~qDBFLvQs<2u;iZAu0k)ZxM(#j!FumG04uKjuY(4-5n_(w}M!Efa~->aRme zH=$^LMu|S8)=3iO+A-;{Z8;a}kHtR`Trp0kQbiujra=VdO)=@fVZmJ96qlrbNB=ze zca$>r-%<5{!WE=vGs15j|@@IL=@Ea^w`lN68G;zf;bLO~NU-s$yl&#?%IrswF zV*eH!>&xZsDO~|_bpzG()OzbL#tmr+XnOal#dh48rdj{VuW+c~me8}Sjb&mOuNU;f z&UC06P@VOA2cHy%v!I&(K$UV?tg-l``Z1&S$Fp*)$is@AiIq9AMsUj=C^5qj1X)dT z3)Y~=9r-@bDyVVSE6v_!TG76dUMY=-af|*1-B+n)L8)GAz@RJ46C}jS4sA7OUBUO5 zAOlxC*}$5;aTd+MqKp8Gb*1ZPM1BXsEG_C4Hexq#oG}ZqPGZ4+dv0MUUr-k+&gH)e zGh(PIq~oK0^_SkwvjUwBCJvl!TFmTuWg?{#x9+;ii8( z*U_0j^iHe}5F4vnt9kv+F5i8nF;GCT^=z|K-^lr}UWSe2yz^V{yV%>Uqg-`Z(|2k- zEw=T5>R5K4)Hm?h+X84vS48aXZ_i^UNzbW-W4oo}l0oplRa`~HVLG&vzL(AW7U}GO zJ7*~_*6HqG{=#9(I-4rPlk%?hYY7Ho$^xj6h^}qb{u}&3xMKr7KTC{EBQ{~&7lCS> z^?;hj-0gac!E9{`@&F8ohcLGv=4-+c0Mtc0#EQTX)>@7GGYA(w+(cGit;T}6_H_Ur z`SFLN?=`IZl8e8#guLvC&TG#9@f4mdeKdhmU$lQ%@yRUyTJcPVv`Jr-CAg|4rM9zO zma&SQtERN$r+$1e$51Keb_a;%KZ5v2`rR?cW)^mS{DL{LN1{@>{_x(LM-lb-{BJ^Y zEQ`|h*b0l|olDo+cRvFA|5Vw3USrt!>i!tf<1Zao<*Y5iV7Z)GrjaDEfzmVvc76jF zwv=_9q+STZPc_^m%o~U3=QVAMLv?fV_7SurvPhtiQX0EP{ zxBh%}?|0=!lZ+HV)r!o8(aKfv9iDgIjPc3~8&Kqy|lyC9ia@fFup5g)|kS&4c&q zpw`g0ammisezrtEHeKepkJ^_yO(uOR%Nvb%4O<=S`_G*bL)fjyO5{&B^F>Y4ilqu0 zIMgs=8iIisg4hOMJ_`HO=%?fJAxI82309S~;=DnY@p;WR#P-e!MJGi1v;Wczjb*(6+Kb_)^}<^mU>@-!+r(BHplMH5F!Rx^a?Ps^V- zyS=xWS3b$lb90Faq=&x>Txr^OmqIz#46H_uP3*im#)+~24ZpQsw9+(MJq*RLdiSU^ zm-wcuRG#MqehiuPl0A;5C0pHvmVWF!b8iWE^^Y`)f4Vv;Q zv6NmhGC;BYOeMGq0eNtlT?JM>8)gy0w1SOR1H{$f(m$v6l6J|+y#gBqJ8270(}QsC z9Te2=&n}JwP8(!;I{Xq6l-O1%39s(CK*6wN#{wDMUgLLZ>h@-*szM1=z?su(@S0#I zB!e|7jyn3mAyxbY7#Z#ZuG6Fg&wkVR4I#dwm_>*ceol7LM~8jdY=F8m(m}loAI8qk z(#c<_eAi=0pj~=!Mm>nY6ovY=L8c884u;br|Ez%*B!-lU5mUD zW4Ju{HOfusi0FI1Q2qV1O5cfsz9c#acz~ApkOz_{9$;6#Jfw@TZ_QydM{UB>{~Lb^Vw-?{!zueIVQaV6 zJP0PNvpv(ML;*<;!%Y!WURXBq?Bl@>AM(ZQ)lDcjY>c?LpW zSTS41n#Q;zos4AY^F(DcaPi#oFrg_{h*?I^1D6T%8G?tO9u#MC4*{aO7KtvNRp3wA zo=#-EVU^(0ljtAGpkb^WRQTdH3P+7Bqu7%=&+1^`4reHygrNA}Qfj#{e?O&$|n<<_xg_+81Cj=Zt1B8d&PHJ|Luq zgGyQ{Y30)^Gh1~P{Okps^x)D!wV;I~ozDtWd$Yg|tUe%|Cujy*NRQ4}Gh_^IMXNkU zGO%5SpzMQl)t3M5!zqJjJ9RXq^Gd4)5@EsO8|_@d8%k#%;#JhR+g!`VH9^XPgY7Py z&YC8x`JA)ad>TALh0tyJ&X$^mmeIoTY>Rc5-or{vceS@o#KB6VQF?#Wh?0j|C>ez# zdVydgJE(MB{|D6^5|3)qXMExV$$Yg=5Buh__ie$ihs5Pjk-_GQ2KCc~rF7#XR&P>MUK2;`p)-GV&`HPhk8a0X?vjkK&dIX`%h7 zUG6h+U3A6wgWZ4>c+OMJRXL64rF}JoK!<>1-jnnjG`QOJl~wOLi}l3xnGT_pl_{?U zA3I~ZYugjMBKr<$1c;q{w=DA&TWkCxV~p&R{m7hMOnQTD`-j(__pGcB{Rq5hu3}re!H~Lo zcKep)*3==6Ikr2!2dQdXYhO~9y6W0a0u<{Y&>f1IUf?qze#0Xp_kPfFf?9{Qe&tGC zU*)SGoaMF${tyV9+@Yfav#l)-aso~}t^lS5*xXeb?j<=r;EOE<)OD>c4$_7f2VMLN zCMoqjS4A2ZTOXxs`I|CxUzr;gj7{(bU!r6U>~_TAMY zKCJg=bIW8Geot+4)M-;wVi98!Spuo@Q+~|%p@JzeFE*VMK@Au|TybVhM!Gz$ z*tJCo9>rEFAzLGZy3;$NJAIJzj+}LdGvk2_6osTo10J>UlYSnwwl-30v7_hb!au6W zo1SACzhnHg13&fUia;q@@Q4@(FW9uoO5wprGqpPoo>Q$KDFuQ2X#xS=npt6b(1gGv zt@SyhEKEM6Jz?A{suJajf$e?>3Hq4HI-7#tqhJXt)B1%buORxl6e{46#QpK(L%K^Cd0?ydOba*5 z_#aeMJzf3 zN9w7as-JIQN@wgD8`tQYKJIw51n%FiVgB8-*pPwBk2zKo%TD^*`vW@DX!>&t?La2XLcy_6%aduRO^dXAEYX}mN}2TVI$&XN`)LrzrB@Xo`f78amn3t9eyXr zjl$&LS@5b1>p3W%O4OoVZGQ1JKW9?|sy6K_gZ(h4_MtTBb%fxj<~MDGq3PpqZo*&_ z*=j06d5I)fVnmp;p1sp#f0%22n8>HWN8wH7QIaRJBH!fR?MwuLKKWqcm*E<7_MLAs zMyP^0jP_9|ui^va%idsscj?Jg9sz6-JXj0MJ$JD2=_75c>8BMrfA^)X_W8hEa?|(bKW|Uqsb(q}F)^^fMm6#efIr zO3zAh*+_o5^p@?1D4>k#~-7^5$ns<3`W_QNSAl~^+ykSYsam9k5HR$AP$Jv7+ zL7qiG$Q~E_Y1_2-&FtE1q$l$%;M}U96_@yX)&E+prR?orJgK~^ytM#4`?pkVz7cqt5fzdr;I8wK@+zKo5s z1$L1@x`6T(o%wOIATM6s`-H>E1M%9tC1+4-sx2pL`?RZLk_$3-5mU}=tkq6JVhM5z zzR=ht36zRE>-sfuzXyPoYpDU8*I^NW^P0YXH%fu@SU(*1W$!R$q-E@QTz5BddCx@A zE-_~Sn%2r?1IoE%3}v2F#PG^|%aeIkAp|N7OCuA7`pL%_=(kNDaP<0#aV*UhRg4aa z+sAWI7tmvGXKIJWb`-vyBvF+#`8){j_>D8a$o5vDyD+Ha z(c>zeBg>ZG`iFpahQ4a?Gw2Mi^23m6el&%_*-nl|&l5deVo=&hAy`)cwd_mwyFgt| zqfy{WczRC&R{}fT@wjy(!-qGCrpE4j8(&5+gNRWo(}9DLcO2kqAx|}v9W(QG<;~L6 zRAqsQjE}unJ^ZNE43%uCtaO$3UXpIy;P>*P;dW4ESxNz^a3utjDhQruI<|LXHEO43 zt$j2xh0LQ++SWZh|S64w0{ z`{$}jbrWG}Rkj&IoUca_@bV&gfsAK@dU!u!Pp}>Y-Gjh&4QXL?HeWu0ZsK1QOKsej zLt=_wQAgljvQ2J9qEBuO0!r@JgpM;^8)ekc{#;odWx-y#wfc(f^% ztw1Z!6QV72F9)5q!+AmeD&0xUcWAyU3IJ5lYe^FO)m~j1OY7s|68lO4U#-=d&ZlKq zq2UC(U_0&?5~uW47SE8yx|VBsX5YO6EsPfF4wn^8j>;3a@@lxhwA- zlQ2~*8MJ{^KgvK+c#y5IE_Ez==%vOBwdPH(m$ch`Xp|*{m?cVa?9@+#!R*I1WOCvH z_)JWY6~190pg8gsa{GJcTf{5@EP(z+|L?=N_Cs_1c9qt))+ zSOIR65hmGp3a#-J=yuf))rb{{1heM;`p=P@QxqBhM5}0|PR= z*l3$B#wE{pu3crsluVZ(fh5lW9*X)-eCBNBwdL>E_%s+6AhWnKO(9r*tytV?HnD-4 zgT&B3%ggWZ{n(c7dGvK~k#Ml5J4~aBuZpGMMuwF%rq1WN#{}L({je%`Zc}C1~pSd z9Yj%fzniA8hN_xl@TIwbYY{vqV8m(mIS1FJZAnNJfbXxyaqK_lIvaubkrnE%Kd7?^ zopYg}>z_a6({EbH5BxyeOE#~yb6G~$++oFww&l^L3jy$9al>0_%2}}X9C=RlfCb*- zuO1(Y?zVWU(4E-2MV*5a;zU6bQN}b(8`O z-%4UbCZTOSgK;&iV>J~ZDIw!fRoZ_Tc7(Nt%#ewP)ZR%IcOn`6G3PY%Wy+3;Xv!jS zqDCG>?eV#AGbFmcTncdbk;69_GWR3q^E0lL4Z0LKCD5#8giW2NM;{f#ls5ks;**|0ceZOfRN?t0?RdHj4oaUa&R`JYwr(%4RE&AFhV zFtz+TzoGDB%{6aW04a8^?HVqt_3;qvM+C*dil%nhs@ZQm4x87A+%cV<>@*j9)yR@B zLy#Y!RMaimTNa@*DCO8E)rn0o(+v8L(BjmiGnKgfJvZ=>#wsP(*wgPev$kRgq z4J5lsjjtI2a{)E%f_9z{vOcNTIlxbKdwW35jr34hCb=lannhB9O+Y5B#RO%Z3&_Z<+}=3>6W3byE{xf{SuwqAsevuMB^ zR_UHzlXfWncfUm~nqLpvb0VHPMy~J*3Rc_l0NMUDjC#k~h~KjZpM-O$Nq!!~zyW+lTgM?|TYX-Pb`Kpl$`PBbnHr z;9?>c5DEOaJ65vCj#)JZAq%?~Q}59cI>O&^I~1bZzl zoXfyVbNvTp4edg&Uo)aW-d_-K7Mm<;%o6(#T`#by_5Ird z1Fks2cKsRVta@BKV7vD}85&f(pl`Dc&)N_j52>DOdI?2(K(}~P*wr_BEf1#OnZAX0 zz^3g=sl`LToK1S^o)K!VWc@B$K6LWf9P?tpRnGm8x7b0e&Wu3Cz(kx)dJCM)KOa-1 z%-`>BCN!|-tRbUxJ1s0 zSG{pqKk&CU5li~?GwuqrOLIXT(KMs3VHIPE4+;38!z7%)#BPPlxJa~%w!S9QsTBXV z@vtgXek1g=nK*4~ZSz7g<<{+6BydEabyTMas0DS*F;73G(Ttjbg;0m4-_lOG2igIC z>gb92{0O|k#-=y_-*P+u&1!o7Tl7;Ayl*In9{n1zn+||8`jJ57-23Goj2tLTy*WQ# zoj`)#KH|0aL_|h&=b(l|#OL*2zw_(YI>m6OY>T2vm8j3q=Les%evpKjS*84Sn07*i z{%gV_QB3}|+49g)nBcL=umjLIIxsT=vOZ#k&No>CjxfcAFM{^d6p1BEj^nvD)EbpD zX=3a`+0mh#g0M!H=hf1B4v-}$(~y5&L5l+i%?~#qk}~PApihPTVHGq6Hp_YsP-kmA zi@;m+LuMw!vM_T^=^m7_$%9)m+WI+6xHMINuhpBPiaViW1+Gn`4d{d|SnN7WkFF!5 z+~VSp1Z9aF2%ECP2k(WGwa+3XZk@tj!r3DVDLD2E*u{UPdL|+_A3@8ovA!Mib&+hx=^L zXPjZqXz=mpEZB^kM8v-^=e+c(=!E5iL3p=@e<5*TCm17RIgwX8XC@t8SfS$O=|may zR$oBD+$X9Y*Vu-$e-i+ljUqj=(XPOEcILFgF?o z-{tcqVd;~qjY{|6S(8?gjXPwc$E%jhKA82E^w(@3C?&pyn2oP0& zAI|E3+)ECQ6aIU0YtKh*8;~SU0$69temqdieVx{E1o__LD*<7qI>-N@nmc8U3}i}q zrzot+35C=DyrsI%Ql#3*pA_dDFU1@0FY(mXswdNN7aN^j>{~)W{7oYxrlv67=AJk$ zH!CJaqsv&HhO{YzU|Sk|@X(Vw}V6yK@LqCtN!*uP2e;#|(2uR2@(L*kN zi}6(J(|Us-#qtKU-iU|;7#Dy>dWuhntON%b503HHbr=eGt-Hm2F;#3<*EI8LJL<0I z;euqW=_Cx@HD}Q&pz04X&5)5%DdIGtl*P&UlV*5`kiGrNK@6Zr=P?w`yhf9l!9Y~I zSlk(@U{ut$eraeZV&++y=?2*@asxqZ7A&{JY{9?5sOMcJjWS>N>O0U{O-^M9DobWBMd z1A49gH?hyAFRZ-s-b}+<(@|rldRx;c$VE7(f?ZYMMbCd!+m{I!XT9RVLZmsgs9C4- zMX*YNT0;Ism;}3?T1}T^1K;QX;2TZrtH+F91b}VCwwmHoz5rkw)7Bgt6aWWmxM z&raE$M9}R>XEsBwR=lK=b{eoS3X;z>FVbC^#6+rlYueKc$vY9o7sWyJK$G zdILdGwTza4d%h4b@z59?KgC>t1>(K(olBH%F{wiW+f2W=q`kMc89XMBs`0c?$crP1&)f(8gR zt-6vl>YGh-1C(Q(BQJ^zYZJPs0bqh?$tXj_w5eQc0|0|iI9QQw{Xh=Oo50hP51kbf zB_hmTN1s?@-oQ9fE-d+j;urhiqERYZ*o&1}_I|e^7Ks-PLR6~q@zrzMDr72{%3?3z3pL?C1GoID|+4u(Q?lL4aGZ7>VXmw!sRJ;HBXIj%g%qmU%#XI&%6+N0V48-8J zcEHN%xw{z>9sPjL9Zz~LF}8;?j4O_Wa2$`=l+rjADuxJT^L99bX#R8?bu&iKMjOU} zJCZ_zWA#7m`}dOriEA9&(M#6?+}Lb#;rAf%DzjgJ1tzl;tsVB}-uraCr>tQ>gOwr5 z?HHT5E|z0WQHE=f`{7o`7lG2n8VJIPxM0Ev2C!Tzsxw3wuW`)Dd0gx>!0hK&Wi5aF z$k^y!-(UH8j^Tn9G@-OsaD-~D!8qP$8xee%nCI8iguu~-7aNY?_TklY7G4{tmtT@j zX*e(tDn&O?Bo<#PyUp-;dy*#)y2p#(qtLRTI$BugecqpPf3`F5mL~+x zkhwC*bXL{=3aX3#@pM#tu2#%-jz{_`sW70M#de&nW(4*eKfTPe6|W~bb|#{jewtd8 z8~5d_tppRy6A${gjU^iUmF|GC;n^)P^nmZ@#xPC&Gwh$-=(fnw$ZpjdoVNTwu@&N3 z5|sYcH=?fa&s+R}cs5?lf~Tl!uET$+f*Oy2Kvq9d*P0Aq1{rhzv0oSsB*&$Zuq|ns z*smN9&WhtjG!PBGu~Z_Jipm-hv)-X%JR`P4pzZbb)+NB@qf$=-O+iZ-c+1zWkT^ zl3i$zdI>NL=Wcl{n>U?^@N>sw#GhcM4@E=;p-$}eZCJ|#l*aKNHFLKEXpYZ6y0J#z zkBa0cL@FyK@h7;LNE(k3GLBVLr7JG=!$DXmKzn|(@V2->GNsEuy+5Sy$`TV*jsNp}}jzskH z8sub-t)~$U3M8kAA%_wOU*_?EApa2hprE>cQiQ-N?y_K4iO~X*{9jrNTb$lc8L;c+wx%}!qbC+dlUf$AbCU-9#7n@bZg=Yqt)J54!x*6 z-6IRviaN4cb+TK)A~`D^fR58mi#9!PK33-TDhY29uS_D{_lhd}e5xK;hT2C`+8esX zgn`^{0Sc!Fg3mWt_N;7Ee)iokqsY)5>|Ueann+K6Q$+6p#v3RO_kf&j5?LSDbXK!a zy7K|;6gy4=+E>#Q(qB?=(n{D7lKnfvc1fwS$k;Cg*}0mY7Nokkgl<&_$k+yEUHJJ$kW!oh1&3C< zi!}Q}vGEPK5l&Y0Dl1p65WB>0o4q&k3;*=mW`;U8IN66B2aQDP2laAv;;h z#cQ-notIRonp3WbEfKZfE*p3t8JaZaA0to8q`UQ?B_F>mNZ_tR*#7aI|9B5@_BN+M z$s)ij@WMuIk*9ggMlOl}b$3mnIZs#or(SQD1{{2>MSIS}Y!sofvmj9_e=WqK>k)h6 zs@%OvJhy_VO39gIhRZQOkX|24fLJ~fREMwM)%9Za(vruNHuJnA>X8iJ?E|bTo!(|X zU;Pns#VfO12prnsK8DaAkEju?WVove;Ane@%Avr>fAm=+mQ6{$&vm8N1P8_vsEwiIMkF1YeFtGU zNn+}w{pf^aVCPgm8Qod`{9$R1tQH13f1HTNSV3Rs5^pU#*W{)*pV`h^AkHUm9w`*{ z{E64}{EaqMJgz&)&aOXGkn)wa%$NC$0*Y@C7VEQGa#0e`g$v2P*E{d9CwMb8#ske> zaeZu);3u0S`DQL(I)BU@$IeyC99Ozp%pA05KbIAg-+j#N(u=hG@tslS>*5S-YyvAm z1caZP0m}2bL&18UN31#9Hg!R_k2vb2lkj?wwU{9^MY_%Y#?)mepXb3) zuAwAl$8CyCbd+cYS)(*Ba(RZXEJK9AX8w8zDVH;);QQsiS@Wg!i?E904{D17k(&Bu z#2psZT9h2kMmA1M{b)AYIh3%$5n~-b&*5)DA1qg@rIr}Ozfu(G+~EEC>vkayquenY z^3ng8>u_~7P6ZZ4aI$M5V!Z{F)AWwl`NMIE4-cFrbTrXpy&EtP9PDB0Vq;mOY45rd zx*erc2y34PEqgoAub>i>2x^8kqpq@_S}`I6()xrkM~^mBSAD_ z1!rP^Y0vjd8G0V?&a^)Ny<7PXgWccWw8H+}{isAMkoo1^%Xm!i7ox3(f=UVkfiOWA zl_nOnhEoHpSRjyxFbKp50+Lgsk!5_(1{1_)MG?b<>p7 zk@0+5C~MS?&2>fARc>{UHxpFCYX+s2iY>nxPcCw~{EY&P3>HS-7yP=IfvMLd1KIiL zjm|cXA4^9nOZjGCpKFX3K7T)M4OobuDWErkX=&V)1d-fY(m9R?cdrwZx6V|SSG&P- zvs@eonuTOKzZK*e+{_pZaZsF&xsyWeW@A%uR%o?M=_fc4uThdiWT3TnFk0aCZuNHpX{ASonwpx=@ z`e|jP1d|Hg7L|~K{V{SpKiY8V{`utwHn(*82ZKT8q3vhTgs5e;O!e}+!nenHWXIa)ELos{9Q>rZ~kudMnww8&k;he%`-UI#b+ z^7IUJ61IGGZmcI%zfzYsHK$o>xzqxCfhyKFnC>YrR9NvLuPT~$3xB`Ps5|JBNx18y@kRP)93Cc5Aq4E$|L4tnu z($|Dnak*8?KI_P}G0gQ8Nhtp6r9pK9Siw4!g#a7BfI+8v=i>fS5&9nwn?h!Pqe-Tl zi|7{_C!#QdV{Y*pKl87qYk6jFMAeu10zbB8*(G-l<>2du#_>sySgDsH>dTd&Khk!I z&)?g!f8z9RpdRL3XL3dTs!Y#_@fDF7{tP*X{^QAOIBn+t{ufg{PW_W0i!K7s$$&d_ zfYrWJ6mzq%@R&J1gdHyV$>7W-jyTZJ(#@4HC`VI5%@1AU?1boSTqavzU%BU#d%hcT z2@>xl3<;x@S9j-lvFICF@oXhYlRU&lpe9F}fVhE8LUZ6^bd1~GM-uHR19vmF4|{l8 zo7b?ra$7zdDy1wV2W!!B;QMz(#+hj-Vcbknuf&yp;tAtnox;RE&=d81AVL*>eyNcX zL1Vh%^e*?8H`If1hL`BVt2EndnO|6Xwh-PRKnn zlCMq#KK{joee8XP*B8oo-@&HEMfw(PX$a+OGmBUtY&IW4{`XGYJTBD&cr2l|faRWLUpigE_t zTv|lgDW)EYPaCsVKPj&~Pt*h^o6B>Wc|xhEPV;SZ7#%l-V@SB(MxSaO-p!=&GI@;b zV50|~!2(eQdUeyEwG&;%rOb0>92KL(U83T*hSJ6^WJi`?k$w^nH-}@F-d^6h^Mei( zccSq%V}=}rrY+p=bP&kr32k?~9kgicuH5)VE84i0&>tkjGa^Lva}QZV5icZ2rn*Hb zGA0IEVH5E=q+-o#*WwMT~Hs?uQ{?w}$yk#3s1F2%Og_PQQ)aTO+ zT`wRHeKj;$Dc~hVbbmoonj!4F<_#6z$yF1f^R~r#BwIIb({z1bKp|6NO4wEcZkez^ z-Ne(|^!R5Vu01G+copd+YI3xh(NjWWk0Pf-VHhu#7`vvm2=waBvaW;OC20^`q#%Ld zPwdGFy5pYZtJi(cze)OmDW}?&ig1;egc|2+pP@6#-C$ELXYEcsy*)yuj4rZvdWn`W z%kW0RU7tE)gRm$;m_^i(zXQUbi;67=f`{oagJS1g5{RMb2{j%2wj?iWcSTL{IheQDDUhCsv|V|ni}BYgd$6GTDgp8NYLM_UOaN zRzvH*`)TP1+|L-k>m)wicU-uB7`I7gRunO^sQtOXFX;g3%5kwy7PSwM9N}7XsZlFX zqY*p2PXTXX9!+Gw9M3w|C0fDv!WW@$5k|8G^}R_1F4IGzQiZVxFESIZXiU%8p?U1DG`Ob zvokB)fM~-nD%IjH?6l;uKl>(qqv2apC@Ryvd(S7kGj0^T@bSx@QBRX9_amszA&w1*5+`O0(u%Sr|89LJ*+5tX%_!8GA0Fh9Q5Mj|D0$%zi{We zfR#Ma#}oMx|1*O#ax#+*?beDFbKXACtx{Wz_x%d4tfrwH{wmRuzjvg3C*Pf|pgz%l zkn(#~IwF41b8UhDZayQwFwY?qTZgvltGUeK3(sm`Of>xi;lFpX&?vs!$dRV-FUJ30 z9o)kdDhU9CKxrA^VlW#_d(I;qN*Mg}X^XRZmDp&Qr@WOZwynBC?7Dsdb>z@2rsH&D z$?u1Jr@~d=@AS69q`^Quj zR4RqgPbDc!_FXAU$u8NGB$74za<>RYghW{;OURmipRt4pV_&jNwg!X2m|-^aUeohD z|K)xE?{Rd@+{4U0*K(fU^YcB&beleG(?5AppwDE{(jzu0R{)=n8+R4fX`iIHNm&Ne zUhvp8RVl>^jEK5@zHO1ASfsT7_5rj8b3XoM=I+V!>Z7Jk=>GgaN4~8io|&+4HcmC` zNLtfG<;ypfR{ygp$NvrK3!ySaBP27S7I&=q?!i=bs zfcH0Z&xH9mk{rzq;7upu)7Eh_rF(NzKZi>L!}nzf6N|aw7vL1cqajO*m#lid3bi_# zNG=a#ty@mAsOn~KwY7J!kCdKunC|`b=s{Kbbb7dTsYb>LK3vBYxwPJgrUtsL$Tyo( z5c6!cO7o{LAM6g5#^>i4VUm_cNe_=3yreA8cn$@Y?H+=4nLZw+sPGn^NiMnakGRZ` z_JQfZ12e{f!}xjJ{h6w9`^gb|m8^TVZA;fp=ZlUWUhd>wj+`ge!HIY?{>b5wR(SoB z2)nz_l*9%HSoB8T_cxbpHQXnOPqALP{Tgy&q8{cFx#P?K^YMh>Ccg&DjGinPjLF_t zge5bkMD%SZd;231<#&pGuIc3lnoXTHxokhBML$Lg^9(X5YShF%;MY(nxEkYD16Q}Y zJoapM3zhLJ}dqq8KR1?R#Y$Q`E(4v^T^8W2+N!3+}tahw$D7&o_jEPcMxiBJyyE$ zd!y_oj8|X(H6akp6uG`XjPG_M{Uik+*UU-G{&@AO=*_B~-7agLvu8}R-yW>nI#{1@ zLk`hkhvXaI!gSS73RYaLgq>P1Js53jaTfZRC#t`oo}W;N(Y=|=nEO^_{9Cz6pVmPu z_cI4|h7+E;o$Pb#!JdqNApby($zvr#!FE=pRr%yUL7L_{ADfcjq_JpEc5my*efhnu zAU9vwbn=}%dM8L?g4qp zj}l!I81=PYGkm+xSjDfx^2c(ePJD_pDvbZUgh6e(-p%x@EJwT+*q(}J*%^Eo=E2~U zLT##dWvyI!@{40CIgjW^vvVeb^Zs}nL4X{6yc5{XQb=A3V@xwUZUL!6dIxOP&NuMa zR)W+2gA0cqWg48wcU>;bh%1y^X19HFQ8e-BryuljJrSu%v-rgeK06qAam?QNx@q>o zbo~MFi?`SPHLUVti5}xzWX}G(&R71CHJ!_6{N2gh`e4l|oveR2(sPRa*po4J$fQkW zq?*xT1+ z`L(#0Zp-kWn_v03>#N0!MC~(-N&Y7=6>2j72Ii^2m>8B%$7hE8PGpMxx+5u?n0Qou zP)jjWOYzwFWaz_rNTi`l1AG4tvD?V zda`}LnzCEs{@A0M&*Ad}?W6974tda(`X=ZGa9K4+2zGW5l? zUb7b4@kCen@H9(~lx)1W{0mN49C!iC})dI!lqEl1P5)p9Sp9Ys3}8$bJ%gg>073uf)kYelVYv-tB1!@x59?@)^qQ>I?fS zwwdI^ayL8v4A-Sq3%~@9Fn<;3X?;qdOib6wfH< zjdx{?p_YtEcE1~;H(RF?-Y>Hs|JXv`w+Mg#qhb#WUbyo|4=z(pEG$428fHrf{tYLS z8A-$8sho0WP4+t13oZsa4|I%!-cAR$9iQEDAHMDXYJ)qMJ^97WJIC}66dp|;Yd+5L zd9-DpKkE1GfB?P5TWN(i(_;0mU2}{$I@Ac#a?r+(2C*&px?HO67JCYYp*OASweb4) zf{JSQ`Rw~*P2k^LzWl9YigT8I+P6smY(1DAw-r*~*D|%(yzKJs>}_D4=WiMg-+1S` zHxbAsV51eAC${qC_3$I{p4zU3n}#48mp{mT5!hfkigeoxkJj-r_34&l{Iu6M*P5FT@o`>}}1~RX&hA&-sckum|fZsV+myQFE zUR`To;IIowd)?BZB;rVZ_A0utp)X>b)pkdC!2I6hdD2RE>%~ zS%pZ6(4g$7)vuF-jX%S>Ag2G#W|h>I#oRLt3>H`h25`sV>yg4&#&`y@D--PUj>J+W z`rk6xh`h@9I78gL{dt+==GnAw$G*eaFRc8yCz5dJ#*|lh*hA#V(^2x^vHJ(NeeLmg zEG@>Lj`!DS?h$bD@W4>&9$~4`($gNo{pkvzg%Sx{lMtM=xWt3B52ejux*!b!NntyU zhOoU>PmPHVSW{SNVmL(Fo>{2ey3&t~`ia{jtSeE%f6-($5SI`L+iR5h^)y--Wq&3` zQ;ocYFG5haHBpEl>c)B+EIc@r?EdjjSCEY)GG&FZfWxTuA!~)vUFe^Fr_jP^>@KZQ zJ%qd$55;7`gNV2VG0)j1>f9)Xngj(Ax@ybz8)yqgTM!!QK;79Rq8z}-OY4*Qp5W0i zQi^tGpD^ENB!z+p@0Php%~G~kXNn-TSsH<;=nzIhW7eg{$&2thTVXJ9^31|i6cP&G z^`b5l*5-=3Qpjj3evT%Df(HfSa76)FAt;crxfOs=qwM`zM@pg8DFkepLvzR;5kjNF z_I9wE%IK}ADC|CdbFnoF1>ajl(KaU`O+iV@Ogj%5COq_*2V69m(#PUJ+rpG#b;9uT z!(xvkoqohSgc9;SX&57zdMJKL5w%efuStDc7rN~(jP8V{^fcWnXMOVi}(x(B5o)L`+@-p-ZTt@X}82DRy$l1+u1@#BsJ*J&DR7;P}_ z-F%uh?|0W@9hZ+$$Ot{{`J|=C1h!yK#ru5B*blZkRAv-M63k!i@>V-vS8A37l}~S& zgpv5V91panAj<-T_q$|T_+;2$KRrfDm6{RBe<*<7YR-%JP0f3%3uVOzA;dA&=aLnd z4pZKUH=8Uw%|7n=Ce<|+@}zX>9T}|r7t7PX@|(&!zZH1)gt!^Fsf?b{TvC^hyn&VZ;^6ct&qm-^S5s|g zbfM>MMCV#Ot$@Mgtw(LvTjo$J9wGd?Ad#@ca~sM?)jbpAhp?BFro8U@5~rb~ZXG4T z2|uhsk?u9QGFBfuvw6k9d2PyB?NHFK&D`K=)~NVq$bp>&F)cYORohKma((Oz+js(_ zRnWXMC5JPW(Ve3^Upe4e#=d_tsr zqS{u7Tps<bG!AzjD-ep1>c)`;5I*4-oD2<_%%TuC&sI z2PjQa3HV?VYIDHFzICt1iU$+cLwZR_QE6H~5nreov|Kh^!&MQ^#Y2UgmL(NSwewIX zw%PGL+77Fn6G`}*Kke`Rk}0C;>sOn7YFM_1!FlXTh^}?Z7~Bu9au;ieuqI77h$hC7 z1E+H7tHO)#QAYhHHWrO9J={J+JV-R&dFQ!Q|1x+kYX1XSa6p15?9b)JwCw>jyg);k zizm!R7wzl6>@|qR``EqJP@0l09e?s^G&2boDg#Td)bwt?fDX*ES4K1as-%rmkK_@M zCEQ8&dwL6>)q9MnkTcTBg~wM&n2M^VS+2K+{tR-2i=(&7_a)H8p}jWe(7RH0T}3y`>bfX(UnHoo_?G9<+3jo0{w*E$6v2Qk+{&5TUKn5m6|E7u=j@j zTh=OD)*|+&0!F}0r|PrSd$ds(`TH%EVbcRJ`mt!|t@`CN!tX29Q$2fv;Hk)-Nm!lz zd*3E6^*_7^s2|1d#-?m1bgjJQA$mPI{-KjkazR_;={j~I={PUODD&i?W)JZ}%)X@% z=?;rD9O}`A`MH11IK7nRi3x^}^uO>KY!5c+Cw!)XKpB;ZE%PCWb>0d}kC=L$GA|LD zTbBby1PfxtSqPDenSL8BWy9QDZYxh!YOeaC9hH!LxT|0jF=;+=e5=X68ph%5=+JiJ z#gx!PP-zApz6d|CtsAsF#VxdM(!a0}3W0ao%OaT(vrxk9WP&}29F%|hqxkIvN+kU) zdbM{DUjG`=?_l$OTnD~1o%$MoUAc<`1d8y0&{Ddm66!LHPkMh$#TzU}4)6FMW~5ZR zHfohY4Z+D1hLZ)CebmHTrL1=A)-PlB`@BFL_IYJW?V-E~V$k<-uekA{*L;7BIx}|K zv|&i+ABsy^NVV^wykLSM-@?HFGeo@*CAK@pD6r^ts5@X3)Ksu68@piD@2MNU)HFIC zKIP`}WUM!-j$mfh(~_I#M9BUPHEMITQkMsxcAQv(EbB`dO-rBFc4oibUz32n6WokR?^+rH> zkiO~@Iq9nT%SKDZx{yCUWA7qQSZ0?u9K1X>cxie?C**yU#_q@8!r=F`_rZ5zQo}>5 zou@ZXqS_7|28JYSR7m6E3k%cW?%QXICYa2hksjd0oG!y+za9n?i)OIHGnISNQQjX{ppFwSn3*aKCsQ3Rf z|K@^w!{te`ayl+hm(|=g=QeR4MgzNa?zA3|>0hSk~~p5^ga)#YRuX^gLs?ARU@nqIa&K*sXY zSCj9Z{azL-*HilGo?bWzeV%4)t$<{3fh8D5aTG||yPiOoWFQbcdRPd7y5y}J^4=HT z8tVD7jHmY2ShHI^ed4y5*Wj+f^6#Cml{)H_5NRk%oUWaZ_fLWZ)l7y33rMw3!Z=7M zbo+)?BP9J_=@~~9RokgAZH4vRa2Ri#bLSc1Z3kKbRsv?s!-Wn^m>r)w8qj0p03mPL z&xI!6(s-$kYt2L`m=^wdE^8Od!VmVDzQ$v`OLNH3jnA5|D%A^6){qcB z4MMrXs~Q+dZCUVBLcu7SoZ8Mu%j*4;LZoTS&-Q`KRPxctN=U@sH(yg(6W_N(4r|xO zl9M8%W_QIvNSAmo1BsSrsm1WR{b(KPVRk%7DX{4X)GlnG}Q7 zQi~v7Cv*!j6URQaFiR=P)anWcl3rlneT*jqakVhlqkLea8 z!4rsiwrkHr>EeXXPN(XV`h(NMG`;L8L=XE4kM_MDp0FTn`9>5NJe<#RcM2>E0_M60 zef12F{F`0$RbNAMp^0t8ejtqL4xH$~R$~8V!aO&+(fJYn#I|EMoNMtVm>k@!j|CL^ zrA$~7{V`(q$y3_Bz~##Rkx*&d9eH6+mk<$QPBihF#>xKuh*0VD1!m&CJw5NP(34cM z<*Rnw<5OXp{@uGOpZ6iKeT3-<(nIia&u2i~JiX6^L;yr#UPa6S^|Gbzn*AI_@VM_~ zLBa8ckOR;tFmD((GDc|I0W1kx6fDUyv?NO8S^!eCi_XggRM3po1Sc+Ll6C-+&~yL- zd-462^3+S>=XCTf;vbaah47rv6a8D)AnI`V)c405-xbO422c`$gj#yM*l_ZMP=dz1 zYJ~BR^X<=dpX)-Jfp~jSFQSR}!E>QRc#`KSz6#yFEaa}9H~jA$Z7FP++F{R2 zf*5E}JJf~NB&)U)j(8BbJmt%XyB)OG1&gPjQi8tHBxC z0>xd_L8Ss(a+|ItRzOR}V*neKc2TaKpni0K?m9KSk5@DF4E+&BVdQu#W!o7Qy8H`O zE(V=^MOb7u%jFAS#$6Mtasbd2$+!-%ZKoY?TDo~hh?I_XHhNK|tAvr!Oa?Rv>p>E0 zI2=X515NM~-KOnp7h_XE{>Bk5@Pwg>*(c!KZ>f8w{b9pG9~6cZs*O)02cFw!s&P$g|x_%n2Z z&ls3OrTU(l1<)Q+9$op(l)D~dzH?xF|HV|813=`&aWlY2DAaEqFy|xk|~oJy02>*677z$~S852-uSw8-5vUH*CaQ z)E6NKm>(N`ip8>j1;{9gR_fD4L;l9P^K zhM9uy@;RwrzhYMV?5mi`Nx@gmP6L~UW;U+Y0QsyYJWBEmTn?l401(PFrwQ~22mT*W z2gQw#y&jMJ7uCV|w6f@aBhw7j$t+~pu|2b(Wm(!8`yQ)!pq#)RnSm_^HD>=is4)w# zFy%YwR@fIL&z7miwo>!f8R7E?g#3RZIN!GTAmKg7CoKT3ORos45FHvUKoa^1(Jg=~ z@oPFh6`}zu0;Mqs4$u%N1j~|OSqZOHZ*39E0RT_&)ZaPJL;{Qo8+)>u4=5`s0?*R?`2h*d9b)zYl5S8e>aQ0?ZJ!_kUDv>9%^*(o z<6iAo&Sgh|xe)GYK)~kFUkzqdpfUCJ9W1noDL~o0FqO2#fkH@Mk2}!4)P(0nOF>n6WKGFX%GD8EeDQmT@YM2 zkPtCD8KL&7#Nu?o%r=r5FK`d%?jfm=cQ8EFvP+7O>&e19DRzFL1s7W_l(OatZe)%R zw%uy}yUVTcYu%sWf>1qa4CUT8UxOg>A6m5`bgKqZ16gB0Sx4bbro zPIHF>d&hTcxm;*kO@F!}TDZfA3+n5b3y6}iL~DTc%@8yM9Fw|Y`g#_T9f+7_a{Qtq zaJWFr>$I9dK4d-vA&W)9WB?A<0zX>Z1vEEAT37{3PNsW#7wCSNF{t!m8j2h z0!uvcu@a`--mf2u_eE14?PbCK!W$`;gYF(=B|#b&cLmcWf?`Q0sxLs*f|o=)nAbs; zhjO=tCRYmezl@BbVTkuPnji~F_tsEjA(G)fP+Bsh1`y1FTH#Q~{R@Brg_rIdsY{)d z#NB|{dBTviHX~YXgE{%*Uvh)~g>LlR`k(05TlZPrCex@j^D?qt8ooUM(`0SK70(%w zzBIGELR$f_MMZ%HJhl4?7Fj8@-3peQfQuXs-D-NMMC3(EMVd8jsy*I|_U^*1QI{fe zX76iUS`Uy+<%tv~`5)o>1E@_Cm$ZE~2wI*}29_OYT)!5m`2Vg|SC#uxwy!D^d2y{? zZ}`BoMLRRL&q#GX4>na&LlnX{qEd=L<^pAbF>c=m`9QV=*z_09WF@Qjf!6F811 zs1(Xo$v>5#S)+V<9?)4mPZ=@*T!(~CO3!f#fD51<#9tV<0N|`9PY($?NYVohm`ipF zkO-g)fT3UdWJ>)>1GaCe(hGDJe(noW5dQOxd%IH{QPdJ(9YC~d!!X?IeEo!%aNAfW z-0e8zaA6toj^v`12{0~JDaKNi0iJ#GBd~Y~1b~*HxFVt_1gZ!Pq>Bg*kndk!&D~=M z{>WZwiD^=ngs=XvyKD?z{t@Qae6l}y8CE>*Z^G~^NiZ`WEM@mNMBfTc;GRugBDr~* zX<=700I?-%5C;IPtpM|K@-KnD+PlaXMx_?dfl!DSki?Y$YU_X%@byE)L)3KqDiZP7 zo*|lOEP16ZltATeccK`o)9Z;7-Mog6AmOx1|9=zP{{%K=OnK)22iPjHwIIenSjss7 zodg}h{V4p@isFelJYx9_{4qKx9~dxdBHe(29e}cS0YPhHk-8v`c4dJWPfO8Nbsx~* z{qT!mCE%5?OJO&@xu{}}5@N>In+l=`wRCsV@k4!a`M3a!Tu=x@<2mTX78in4D5FDN7+Jlm zC+v2cm8NY?uVVXTrlWOF*pZ%g7&=5FB>eeb3+ah+kZOE96Q=qz@HDu6`xm*sp+7-% z>+ekYhO=D5PWWOLk?BDk!Anu_8SQHewINJ;sEt>jw}9vo1hYZ`a^VDT5{oG#U0649 z7-$T2EP1@FN9A}AN+|{)bQj!_a66yf5IK60GzKLFl$b4k)vdNr`*3+-J=B=|Uqp-p zemiPE)FFie$Q*iNcdzL^@G@8F?j#S;2&fR$*O(ii!8Ptg3_meHy7B5>^QIWp9Bx@c z02^yN?gt0OXWS2;KbOC6t9w|g{e}a`(|>oh7Axo0jP6QB`ZjeMf|j612090%U&Bj0 zJ^eQBQ9&KG(X9hK1P_yn#aKf1%Z}8G|7QMqk_EjG76HG8k-=hG0*`AF z@hl~LphxHrdZOB>eyd!-EQD!b)xgq_W0v*>Bz?gG6h~38m?@PT^wtpO5M4^A;4z@9 zhU!1^AfCRNMi2g9ECkW}TT%O;!Xp6;Y3$nlHw(ESUeMEj8CePkPs!4Rx>|9^0e9Ix z3kGcB$3=(Q%!L+Bz$W|R_-`5xJyfBEntHOj7nHbr?H(1#<7K1I0EL2A1UOFvAaWT+ z$IzYm*L_9X9X#=o(i9WY0RrY}GZdI7HZn`Qvb~d-y=dppabMtW-}!OUqpVjk6|{EH z8bFJ{0!oV5(@oI-#X>S<&1K{e@_C@Ra8UZ}-aDQo6pH^pz1JK+?0`cU0`m!XwLsFy16wo=_oNQNHEpXsq|M~9#NCaZZvqBx)*bdl{g zf`s$mLVull2O;}DX#ypUftAr43kLx>tD{4VmxV!Idl&E1PqJ^)AN<3meNqTSH7?Xq zou5wn9-vA{{_WlD-j0laZ>fapCpK@BLVH8Z@4^Ikf)G6iiAlQ!2GzmK_I0#AAeAq8|Krvk3h z1^|)cnDM|pgarbtMrK*1O|Q@v!}#mqK*+H)(Ek9fESYrtHz81k07HUihSA?<#upH7 zWm?U2dZ!Z(jC?S*3_O^90sNiN!WTL*7}JHu3@iu93HV{W*&o?uRjM3a5euy~xm?u8 zing0xZh3C2{}}+Eo~)AD=p*9=BkN@TQ@gOeVYuvV!ow$qmh8Ig*7r04w^@b`i6K4BSk?F$YUV&cp!0V zDWkaPxvUgF#iyWO@;~}h>AJw{wFP~r_ou*NU~AC#zx}C%|MaIA|MsUEOmMB6+K}t+ zLoE$(I)BeYe}C);e(W_k{aT@2igRMQrjVvoHBhQ^f zC`OS$yJ^aocQp+JXP7()PK|{Z;6u2u7>*GLaLj%^X_sZ&{z#7tC>hkale@IPjSM`| z1DJ9eFy&qvSLhLJ3H*UH@CVR-e+-BPESZPyMi_uVLd&vcEij;ATc&h7asf>=g|oRp zrWzdJQ!6;NKZT+hFmFS8C>`!If#L_T;whuHwgm_fP(fKnaIzpQALvmHX;&6B_QuYQ zaA@vi>?YAWly+zSt2Om6;G(ytP_<9tMsokvnxbhyRo_pqb(7_c9X2e_G;f-rwku2d z+O2q~Nft1&s5h{Tpy&nUqi)U zKbOB-)-Owq`)Ee`Z2g6u{W1VMldxPqN#Y%{GG-aD4$)3*vHd;SWs?RilEpw&j`Px~ z3R`#Pb_N1h(1{aAdG!Akn6supVPx0^BQzgfKvx7_!6+-iYoB~y*}8YL8UAJ)B%nq9<<=rTsR?@kb4Mv zV+r@)J}q3+3iM1at;0E%`AT9SSnK9MKI}2#2gp7_`kgkypKf4%|H2M1lE8{;fi_j9 z)J_bi3v>+}#_@qeppIW0cJS1A8qfd!QxF2FWx?z`1B2gp28NW%tpmqXSO&qLgU;Sn zc{o0PdCo#>G<@>hhglu;w0ZZtVENvn70cFjN{*!6AO4u+enep^8>!&AKaf&0M=5i{1C7Zq4lt zQ!wj&SO-gCtcUOhRs*s}Av0%dW@FSbPMoCndF~^Tqw)5$q4o%hKUwCms%8_J8lXAz8u}!JP?Z~~5|K*r*! zGiw_^``X({!=W{_pW~Bd0lN;R!VhUX>x4g!gr%RFM!2`JHqa;PHrjo0YYo=V!($j9 zo_X6~A3Z4s@nky3^&iz$m+|bMZQ6Q3@$!KSeof%*q2h94ifZ|EE0Y#}7VZ6z!p%)l zg9%Hd1?tTBBs#4uyjgP%QC~;)C$F@{%yqfkKe10E5o(c`Nnu4EC~bx%Rcw7>rg=Q7 zY>qF)MjvjnRZYH)n^w$P0<-<6oSzI%u(?hQ`EJEKB_K)y+!c~MA)qL zYdpV_fbFK0i-}zyeJO2;7csC=XFX;viwZgM0k>ZfzUR~o|AM}govBu8IP&g(2dk+U z0G6r&*`)L$o=Sh2EW9?3dI`)+77UrUuY4qX+z77A|}p zz5r!}4}US)Jov}db>v;@Zp3Nzpn_ow(f&d!>6M=az4( zT+ywksnWyZp8k-F6wRGInhRV{th=%+bT~v? zALwRYy4WbBTw4(9aCYbSne*b8ZYo~sb~7RJ8|SaR)2SbiKg)S={QSLp+fY*BX#95U zZ+%?siWKP-e}l-wyN4q#u?E8~NBdolUXo&!yvzzclw{46VjaB1$|lKrRf;w2?qRn| zk&(w&AI-fm9%IfL=D3FEi+FX3RonV7p+==ct?9nXM`#;@9mAfKHtAS4-h-u7sg9gXii1#^}hH7E>d z>&1P7mhhRM&fR4@yxwnhMoYM2cErt$g~^KJ@wwuKH^sxrH*;9e+2}nH@heVRFS(+4 zOx_t&^0qb(Q6a@(xp|2k`^$M`%buW>%yccmiQrPLTI4jaCe*6>P|8}_O zRGE%L-;)&5OJQr>sS2iSlkQ>UuX@*ZVNt@z>!H;Y6xL(BmIpl!yS7?md(&Gf_#;*U&hOCG!Xc0JY5o#a)T89zZk{+xaM@3bnDh(WiNiYcq;XJ-cxU@zW=;H#r4zsR_?Kiq9yeVIqfM` z&2gQJYz~`GhZ-*HBwNTZU42c|B|_c9`bC0uJ%j@>UGXP2-G_51iz~Ux!Jdw_?`Qnq z-~avh*Lra7RFM|_?f4VxE%SrJ`T}}G3I?MZzw~y8^@m?<#3r(#2j0b~Q|H?g5w3etcK63mqq}oYwdy@h z3A>-7jt1{}UBURq?%``AvE}mufm*SDR z_TmwnI~{Y;#%c$$GNs~;94IK7Z=gSEdv6q_+xt-dXdYSjw+!wlgj*O*TliU-eDy(d zpzof)UtjW_$@tPcr*)|N_nO0xgje!I(*G#LYq_KOQc}8#a4=M? z1fRq$oVlisp2x;k_mM2ydhb1_>qAJI%iZ3N#+)Unc(IU&b;Rj`OmB)MUlC);gTU^1Kf0v#X^oCe8yu|)>&oxkKKA3a(OZxkzUSIqBMOwe+p_iL!juPSWyX;|p z%5If5`kjVv@YrW&NTi`CIrpKf(8u)f=!3QGXY-CVTkE^u)EDS*dgqU${`^_lzCbO? zX?f>yPBnK(Rir%g3tz$)|8tiss!mJSnJlNI=!!|KC`fxX+e4@A|KTZTB86Xv0=I{6 z5(F$(w>QNWXZ%|a)9lclAvpZ5A}Ej)it|ejCfd+ZT)rLigrYsXtPeKL-4B zlQ~;w1e$z7X3B0bn<^N~TpjO{SkrORk{jLhKWoNvg-NnkRe0&9jQ{i=hPZ?*qK?Wp zb~1slihGL1E0$bd?tU6ulQQ{>Q4-qe%o+V9Q{{ZAi5*5$qpof*?`%K%E~w5L6LfYW z>npcqim;^R<$5f|sY=u!!ffaK+0?JMNte!>>BsMPIX^H1^99;5m>t8FRgs zN$ikZpAUZH_xjT6>WuTfF1Y*Nk(MMWS+=lo6Ea(8-XC(I= zvt0Q*yhr20nB$)FR%a(1{c}Lnl|yEu+Qo;*fs=1qgjwy?FoyOat0b6G|v@kV85 zuZ{5WN*$lA|3|?#>t^}k%>g`Qwx0Qg#q#sfuI#iK#+PX?RD5*q7%RCNM#P9e(Zb|Q z|86>&eXHf$?PIonU$2+HicXFF!}uk*-1PCy>)(R!Wy|-TcyBBx`GmI6g+~L*O~JR5 z_B+bAvliyqjxOCPzAcm7(lD)iQRlw1!kl-EipI?06SpQV?j6f%X3uHybU=&B-nW@f<|QN{9L`=5n z+M=|nQH$7nkr@e%#I5eFG(Kz_3^k`76kUr&CW?NB>r?e&b?IrpeV*8HuvF%oRBbcbe*hQLawLIvee)79d2{@lUp z?Ju432@#faj_MFW;q5@*^;nqtv!!_QR^3=eEf!Me2@we; z$cLP#Q)owyKofiu*G^YIzaVkU>!s0w^G$-~cC993QPtgUtmASaZ^Z26c)C2?*_iqI z(HGfYznGh=GkW4(;-eyd@>#$O++jB11?%LOFID-wDp~`Yielp{W4TUh8bRo-6Q_#a zDxI`}g1*&z^xl1&_f*4aG1cmx@%x##d2e^W);e*CyIcHHN23W9x?5AEOp730i9lC77_GC-^rb3eym3kI3g-U-P-= z9*N)1HoH;N^Cje4u#4)aiHH|{P`8i%FgK^wNiXVW(Oq+cKvQG|Ir83C(R`Fsb!V7+jp@)-7dKQ{bteA& zowYtkbobR}>2qf@H4QKOWk)RDG(lN1Bo(b$AHUBjUtLvt^$t$p#zucD$^Fypgj;lE zWY(S_Lw${G!O_pfHyN&bZRi)Jq^d64>Yh$YyxcdOcD?gzwsrG|mBaM`<`K3R8N6m1 zK4o9Jb`BG#yVoJZNKmpy|VaW*Om)Fts0dZs3)qrREKwAEBNGM{SYN7 zp@G(D4@@;ZI>#1@uq9ff%IM=iG~|I`&0lJz4dL0CX`S?5U>r$gfj6W_uhzFGb8 z;ivkFYwrtN??1g`Q`O6vfOmVZ??00EW-+ds5%Ij`N_AmB(ScL+F(5! zvFjZ7q{@@PBh{bh&ppsII})=N?An}$YdC6c!y+pDyrC%OOxQZyFKfNVM-+WE!Q8gzjAW&5E`iK>X`t*dJOu|5@(0q zx(KtEU8=jxtjM**fVrzaJA~-ZMH=`vD7bdcV(+;vD_T40)%uV>4!OeOyshJ=R2Ynx z%szCNN!{@jqcKVfD0i;i6&&_%&9OH;gmOhh>C2P4H}gub*4AB)Nqcf-aPUprBgwcz zfr6^YlIsKboZBT=E;fz+#6E|fcl)!_p2;(v8UBeHB2_U2S*gT3Hj;fE`UfiCbbowc zd+DBZbqr%pD>stgiDl*5U5!}idAcdO`*4BD%c-ik&92tT$r0aTN3lD3Z**jHUHFX@ zE)5vWj*^`(`?2=rA)+s*jY}NZZLCZxsC>A&+!fYA?9KN*?DtWSOT9-BIxryh~DrR=G$lJX&Z#p>zw|2EN{GYY^ zsv7ujt+s?v&ECh2uDn2XC3=NwF}F=>g^zy6tlw2yIpCmTaqfa0w|u~Rttz=_n+GO% zR)41HqYd}pRNU#P>xi0q69?J+)~e*llihiK535;?X>HwGvPluKu74hF^0`*`i(Qq* z9nLfU>}V4Fmt|F-wmWn8nNs1)jlrC@L6{=FktvB|2YU|He2a50*N)!H@tnz8b9D$9qpQri0-d_=6 z{Qb?QqHg}ubr~a{ADfpB3*3r>E+;s={%!l`)ABzmCC9q->XXzDi`l+X|Aspv-~64q z;E+{WRnJ37hR>gVlz$psPEXGs&dsNsl&?Z7B)*a(FnsvO>eg!~pE<_WTIOBW{3A1U!qlQ`*($}n)?n@-5JiJpEtAH9&5o9@&>F&%$%1V%Y7ecUY3Bu?u142 zQ8ykR>3GO``kOYJ*1G^0rCWg$RHHL&F`Rgu_^z~N`yvjh#dUu<8?%XsPj$!?oZW= zdabJe2!?ci=39Kn@nL0&Q$y^OE%R%Nho|9_`GCcPRstD$tC7d*_MXi;8k!GXDXub* z6%D%jU|!wA&m|DHkuQGdVh8_MS!h(tHZE1f-{4@@a+FG>_?^49gjn9(!;KA*5_s(85D+No-IzQ%OVqQK?}-Y4RQ`u)sV!kn(F`pC>1aAW1Xcr|4AurAqo zje%q+hZG+}ewbulXa>!;#3hM8P=rGnM^wc3)Y(SiCzoT-^!w&maP>8h_BHbP4O@5@ zc$t0(uxVnmAbVAuU0vb@3;WA>bLs^Doh7X%!*`aL@@5y-b>-%N`c7*_bSI&BASe-B*sdde@#sy8Pk4jTxLfgZ3W&N%!- z+xGFZG#o28xfUzD-BYmlyu#8wdDMS1v&l5K?rp>5X%q9219?ZxWuMMRxQkr5!uYgz zRQ3JK3frh`JN6exx8^UOOZ;*#=Y8s<;$|*$@3+(4Nqx0XzOJjOs~XvLoJov2IZ!=r zuZYF;a#!PyAozz`>wVgeheWJGv4hRkInH-2O6vkvZn&OGd=Xo7Su6XnV(ro2zbylf zr|3mrGk-ic?~Qoy_0FZy#EwXG_w?jV--B}v7y1T zH)q{=$k244-z<4o&pq*riqP>RPXxH)Q){?b-?A8eMqM_$Q}&x8epff*`_NUWC)+k7 z%-OcN;#^Dt_u*H@AA4>PmrK^qzh-0~bh+}jyZ`5eTfT(IYs+=(*!vfXnC9O|B`^QT zJKim$<2~)^a-`UH_45n2{MYOU$c}$F|5*Kry?;)`$~_f1s)m}ZdCB;^_SeO4h!cl% zp4AMxxZIylHmU1cuS8!llfN(B|5yiNe*LBHdR&oq{?WtzhkY6j+SqR}xapiVmnr$N z#q~y~hu<{J;Mgyj5)0uT?%ZYW7#X(2o;R zFHdt-4g)Ex4GI6`z{}M`rZcwDl8SfBY?_}Rx!n48Eh+kVl$(o1m7e};)6Zw}4JuGH z@)_LdiQ_P9wu6CB!7=dLZ4=Q+kr$rdT23k55^mZ}WvCDu9RJGw>gHHMu9jG&azXEm zTVk4h`44|9-_hS69QvYGEf~J}{YY;|O<&4ZGEdY_Hnn3g558SJBkr;NusiM72Iu0Z z0&~xMu*$sb%!X4%O6G&@1*y>!hCCe*Ya!amCrKirFz?NQ-$$gCg=0NdB+OYEJhNva zk0=TjzSBOg>>ljvS{5S9cz@vI5d3O9i;46Bl2d5S=b!D82L@vG80~hRosZmO@;6)m z8FEfn(z@%jyZZf;dF`c~#(~eX)f##XI?azP-ULyDHW!={upgC?l&N1lQBcRM03AIx z>V58vwSA27?$?(+Mb`%f>jbTsKba#6=Z)7FWqlDB2S0o=4xrwPG=8|%*t9HSdY<7? z1gh$g&-FvsY2yk%H*SWny*{VnVDd&i;>0mgAGd)6|Hxbqd7{mQy772K`n#cSS*nw) zUF;jYbcf-o!!IvRMeRO(Wgd-TTUD71fUK5E;)37k9xgZ=#f~(w94zp-*Kyg{hr?X3 zJ~eB(FLvN=tP}CTy`mrH9O`{@<7OX{tCCJ1(&K(tK?=;n8uwmnlB&omB*+~sTvWVw z@ZwDMGxM&u&+JFC&)v;d`mmPWRjw+){o3xdi23b_>bUAM4Rh833o*%yiqa###!0%+ zY1z-o@)oCz^BwquWr#=oniKLbGUf6d`Xc!22!kFx*VVfVqczF@{(bsai3ciAy(4ig z)5pr{nC}NMOy#6VPYXU-Xr4cxl76Mi+Vo5N_r2`lr3WES~}ROUG|3;AgCD?HW3i3wgxzjiH{ zQl6`hY6l{o9$_}R5nb*!FFVsu@H%N%LmQv+WcxbZFebSn&fGUxl^*~0hUVD4LZM@) zA?prG)$y|r$=v=0J5b~U^0#ErT) zjEh%}pLmY`e|UTAu)2OPUl?~S4n+^{THGnn;_mKNTD;iCi(Ap+?(S~It$1;FmxIea z-`~t1Gjr$O_n&$1^W|~{D{Tc6GC?F$TBYFrXAfS0JH4cR5tV%Sd zR%kzJEdf(&V#OQ8y9t$tEN-@o%aey(k;u%Oc10}`2ZCEI70YemfQc0Y0VM1(^GJXA zX-&xD6a7r_c!vvH9`gBePPa@(B9vNW4ciQ$fhom8|{TG?42<-744?v3dK7D!5EdpO7zqA8{04+n|1SjQW79i2Cq0AF|;VF~K z65_FJRhk9YR_D+Z)A*9osYJucCYH!>{G*b921H|;e}*7eN%l8j|3WhAZiZb(uw{o< zE8W9P9^I-9!p1LAGX!z;RgltdDDe~Ata*AL;qBwnLpgrLoghQ)0R-%|b4mF)-;lmJ zVmmWeVONP<$2ZM;7jQHp5ees#2$xPmmNV{3W+j*gO&8)+W2&$Ts1pWoDx$m_#JXdo zp~^lF918EFfpWq2<4p3#Q8V$&`n}kmw2~5ofxq0AHvS%2LsxdX@Y47$^ye2*v`Bz zSr3sVyR7WkYVbQ-*z=rM#e&Q9YTX}T7{eE!cNn8-+8cT^HfFt3&))=aU?T`K`jSp< zr^874!X;_!)cG)|zR<{haq7=mI{9^UJknA#?B!UvJB+3QS>*H0=g4OMVmDhh5-zla z_2YN+6DZRojtm=$_+a}~I(s~9(?67QpIjgF#pO$vBNj^$?r)0DTnk0!@`+_#?Ik$5 z@dw&rlsaq?b~R@uNbs$-lAMG&v&9xx`x3BB$D^AYM5Ykn8(^kO#Z9e8ZFMFk%hhWF z>^z{D6od{qgA#$5Q#WGC&w4!XE382+f#Y-}noQ(96LlR&$wsKhL8xoHlHb=wNi)UU zMwMNHL*l8&b}3o)6@HjnK$nCI+s3vulxvMRGAmoFi4Y$IyoUZN+hMZXPALK97DW9{ z8lYaf5SsnmG$z@hYhntmZ{b|pYN!6KJI0OJK4nYcJ**B8dO>NW5<*di9}uRBdIaLJ^O) z_76`fp&x?4h4pq;x3tHq^J~3jy)Y$belE+Ci9E^22J@0H^J-7QDS=96r9(D-LbJSN zxw^8;Vq1#Fs;iZfh!&-R85G8OB_|#XZP@}7u&%N~m>>Pkd8BIoQp@?9 z@(V=e7!qT zq^bvS1e+R`cv(q0_A>?z>RpBrWy%dcD45dqpxk?!y<=_8(Pi6<_uU;d*3ws@C%Kv?(A5Hi>QNw~wCT6;s_LY+C1MKw3FOF>XC`RZ;ha;Je zM>I!h?HBDd8sTnfc+)YR8dYm=QV;HaVr~awV<-{_UXA$=vdI@YQ45mq^KbZwg^h8n z0m=LoMQ8P(0cAHLNx3Zpm+*q@Pdn~U*#)O%cUZV?r;LhtMqUZ77Maf&=G&r2?j~`6 zsSDA;6UypbWox@QYo-3U`=rCGs%*;>pOi0`nr2$?~J7NO6)eN z!3|1M4~kN72?dTC9(VIy;PDe{hP$~~bM>i^Yw4Bl><=!y01pi|f)nlbZ_@D5e+G9n zd(q1ShW?~UpcAdItzvv*eqRKT4p;1;tZqH@900?Y8qMv;zQA)$QIYw%vFw@r~Fb4FK3BcFT76Ynaiw* zrQR_%5WOi(R0-MO(D8hC9JRt#c34z&@AEe+QtxoljvH(n z%mOVO#9W-5X6cJMqQJ9jmA}t58ZQKW^c4(9D5-UUL9sP+i6ZX3rrK2X&IlOlHA^TP z*`sdc8!!*8cw$7h9~Tl{1~os}r9Sw0f1c9`;A!;#ox@T&U0N>MEgJ&%S&N ztL<3m`(UE0o?=Vp(wjrdk6q|s2NDO|55ubLQ4GZ6*bWJ}Tb|+Hr`;7v3>RpqR8is+ z-?K86)UrPhP1Yw`KR%)XP?$gh<-4ezXx}l`_FIZnzj3a zw_rR0)k|VljUthL{;+o%w(_QG%pbgu;%hd)m)_Ai=sCYye$P~kWEsa&O~N|AO7tJe z@taAwnfPog-#cGUtlHCjbV7DSts+OVa;C0PrRQ0~Rw1**2_O0)+;$jH^;1IrLzv;U z<`ep^C673?_+DCE)sfK5FaC>}}e4wqNkMsVzv1)OzVkj<9C}F0~rY0)t%cetQNg|At%wzw&aESqR6i`S{ zVU1c<3%`VraTd*eOsUBT=#*}I3dB+5p5-0Qblkw?YNLdLrAqbe=I1==QE=tN%MyR3 z(#eU}s#*(+)nuL;wJLn_xb*+{{JAwf6BJw|5*INT`pDz9vpN^DVhBi#zDv^IO7)%kh1g*w^CbT3F)zg|1Y!?A z={(@wNZK3t?cQk3`_*0ac^JZ1I-jnVt2!SZ>l}UGPP=>_&Q5>4UCa#{y`J?Mz20VZ z`93+44_x$J0DX_V02t?Wc<_9!lKlC8)N$Q6MZ#7zbQ7_}H**UZy?C3(lz4NbEY5nq zTIGGaTVD5lnt|9vDyr&wToCoSTz2eyyYcxObheztKI0$j#(U)8RPc!#LvZI3jo) z@pK&VWgKyP9PxU*O7wX=4KlswbN$5oQDir7{pD;t`C01%lIQu`)%b!V@Cshl0`zfS z_C`fJ9`+qyjqcyNp6mz&1M_;M9MH~X4Lz9ssuY&+)d5mL&o z*V|;HSB%8nLDA^VZOm;-mESOjZ!aJNHV%8S+7M|w@OAn!;@k6HkF3tW^co6zU}BD z%xaehO2B;t=C!B=n3o*5k1=|Fl*#gj!Ps7?iN)%5^u@vnqkQJuIY#cfUyfPmLci^L zaUI+C650hIHE=2FdwI!wzV>=*)%AQxAo_M_l~tM5cz!)&^mcH%+|@4*T$U+`JndYA z`>tMOGBc{+e!mpn_;lK!AJ%30Tn)2z-Os%>_=0^z_UXFrFCUxM_fac#o^I;03`JS4 z1w{E1*#VxsBi^qsHyL?9FBS-{?qlrvSV>Xz+O|rdS){$4hr#ZiW3gdy5^UXx+ zyashnGQ3SV|WS}=IvS2{1NAo_Xny71BL z?!J~goao~-0X3Sg)s1Dk=$64b7x<;^?KIQ!VdXJ{HNWd^ofY10A?EE+hTO-OVKGL; z=&^wgCv%|y9zMV%rUBu4{dghfTtAu}vVHXJXUF?Vm>9`49{+nez!%f%<&OO2#OlfJ z$=7^Tg1-AhdQ~uw*|S##Gw`-c{(8~BkHzvfy6g@-JyiKV{$vw*?3WRJx}oDXsOdO| zzDGW6G>jorQjSc=@oZAJb94~O1S7G8jPBnO^2STV$wuw-YGA-GjOzT9gf{+44j7Eu zFv>ZVzeOIsSUd?R$CMam$#@wWEq$aQi&_H!Kf{T-_{X6nvJGN(J%X1o`yo%3Xt0L~ zRYB$*A{d;yM`$!tcU}J@Ctb(UASU!RyUlyD-v^9EZ zO3hqvp|mw+LK_xgQ*=WDC=EsufoP6s6;!z)VRwFLAuD$F7xtdJ8@T*$V_U)**DCFD zAiJZryE?e|OfIC=Nypq@R&D~{ssuR>I8-YSqMZlcJa-3261G#mBh)J}Ut^=oPb+sZ zygXap+KQYSt_$rYfbEX*NGhbk9I11+kMh#FufNnYUAe=Fom>~hN}f}f0d%1*{#Pr* z+|`m5ynD5QLW7o^x zF@$ApSFuYrYcEcUKHh5qS?~5me({FC%4Tn%kG(%YQ7zZm0yd^xg&zsibH?5Am(~(= z7f1x~9H=9}dAw8t zB`%96kk4O#!ZH0ARINWdx^$PKVin~D#p!4AVq6&8MBh~c1Hj`6Zp?x?9!2P1}FMPC5oRRk0tt9#$F|Qmf_rH36^w*!5LrZg9 zAJ?Tloy7P)EjIxkPiJYOoiF%1cQZGa1X(ZlAYG{k4ubJ*6>^{FOFGe~t)i}bZ$#9= zL|M0|jPs{^t0zFv6Pi5q=L+rXq|Ue%g%8X6{*x2mmF)~s4i0k?i%jg`SG*a$_$RYT zobV4ER#PhoRf*GGsh?C_4kWk0Mdg?a+694jhI*xy>3Dnd z=jFzu)VEz;2-jOB5PiIMe9NMlRl5DWn|1UR6DYqT6l=#C#+^y;xprj5NkNpcPC{vS zCpbD@e|czH_q{$N<}Ijl0!2a1<8dAsq9V`tLDdv>r+w2cvqb9!K4po4=iT?}Fs|LREZHFigYT?KjFG=&lZf@wXbEK#pF@3t|LK6%l(=N) z_0UZ$pq<$mLh^Vbvj;Vne&xv@&2|gh4J6ddik;I)LE~;{?W=&HxTiFHqD~m@Qz0!=W?v@}}&u96~funhRJ^&91&k&w*_uOmcmiOi@geO^Y;PoKOx_ro79 zIjnht`$yrh3z8ayZ*$XZR35cd(8f(S5y%o|qfnhpGsRB0pA{N|$P#16=#ROqD+l1h zbH`NyzaArB=J(nKi{U1ZVt~7x<{sYI*t8q_lB?|X<3(8mS}U{*(z9U9(cjykn)Lgt zZS-y*ME2pTSCC5F-?G6L|Lwdp8PY1ZuIKw6uVyr6m__Pp^llh5Iy5%&=>zhn48K?C zH*a`ZvMqv)fK>u4qUOOr-BAApdiaVVI93X)wzq<>{3|>MX zics4Sp_*2L7%pGE$kM!Cq*8_jL+f@F$C=#H=YrG>K>=}F2+FznBgIph1w}VIr@X2H zMF*4=8=hA{(jFitj~q)m*w zFZ9N;t5hpA`|>c7G_-cSFA*zj-bOrA81%g`YlHuL#e3(A;){t;sI%q00kMO;J$UMs zMqH>p4P+>U-aN)^#Ub+zQngZg=wT>MsZY(b_SwWx+B?Jxh(KW^7n?ulAoN6O|9G>1 z1dbnaj=U<=fC`B*24Y0+OoH*n2-5A=P%567yY2nA!&-g2Rn`;A??%{FROo?(iW4565LqE(&Y z)fN}>-Vt68`~*VzMe4Pn{6aoE{m9b5_si17#Uk2}DUcxp$IE!`sIYzi{V(YK4-EPj z^!QJ(L1TINxs@z~8R6)Q~HN@AC^~Sco#?W{COE5n=Ns4epLE|1SGzC2;wVv3r z-_GevjR>zFv?BwVveCK<3@!ZQaj{>J-pD)8@DCu~;F1vsH03k1QsTD3oFB z7}ifze#1<=agYEyfLi=9{WKEG|C<6w^=TAVs@m@Zcq@B134vlAi0qDJ#nao%ZaBH`J_SPv(V$~Lf_#I5*hr9euNS3!ACDnBj(6BKbifn(3Zl-VD6+)_6 z=#3IO>k}`%%-j|;9MEK66#I~08H1m2_czcE!!WimZg{9n(laig+MD`REBWSNqD)CQ z^e_RdrsLgF@oCZpZ=;dKZ#Q{tSh-~`4WWqa-l9P+=-PlvY#*uiQ3S@y#Xl)R5( zQ%HUw61s_xU30xDhl>lP_z_QNO02)W1*7?5VAO@91Yn69i{;D{i_xWFR~h{0!?Y~{ zaX_#O;J=6Ny(7fIeRek6;1H;K;LnTVFVoHF9m`mNzK6FW#ewauRFgS>A-spQaUOQJ zmNzim)TK_rEf^JdTOMz><`?Go$O9?TyAaB(6uD9J2i8>9Ap5xj#FV_s7Lry;Ncqs8 zQC_G1Oa;rH3WK^?P)$khbhTv<1|E@NHN60gfnR#EM*{-rXG<8B!l7UBs7J z+DzoAKyUWn85wF5*lP95h@ekLAD;^+I{D$J3FoDZYe0_pe%v8IV4Ccc9G)}OUM66# z2z^ttln!I}#X%9eD&<3w-#T@gnsH+2I74-N-yUv|b~?-)#c6RuOk;;?;gX@8F!1Mt;ZgK0s_J?@Tbw}Y3+7S7I0I4*AAFMPV!8y? z(#+OKEkAtufTeSIWD&1|BD8Eh|HlbqUj@ZD@lZ%%7v$5_pyC}A{X?${V5ZVxV$GdV z{^XiCqew6-#>Msh`d4|gD;oLxrO_0j-{}ATi?Gp{@o%|M08{_=7iYWmmWLY+e_}_ukSki-Q~&%P zh3$=myu*2k8h&_+@jcvo638oLgaAMDG`0MWANEvslTV2dboesDFuk_2mREUY6Ui+^ zk_lwBC~}Arjo(qG-0?4N2d%POuFMzowP(~+cxF17fL`mykiPzswG*r`B84k+l64{- zSKBHwd2n0vWewcitZ@}uP`rgofG<=8fhmgo;LCZ03b3XrFVcxi{Nt|4QusF9xC1cU znAzVgPqb#|8w5d!v==nm7us8NUI?gx;JKa`LW$MH2EA-gsuj8C(|!Rc<1@gz}F z2j_dlGGoPFN>4*^X>)U8IH6d*n@5QeJ`xfa&y_|12{i@`b`M?Q)f20L0wH6>9^i^N zPV!hsh9}XP8JnkpWhBIb@P%ywb+Mfw&aCXiw0=<52M;*d8KxUy1nD=~u>B7B zt2NQ3yW1ka9Jtag-InGN#eDs>gbK(uG$domd2z){sd@35TC-8~&96lfE}=3PE-$rV zOM2A={GKFnfM{ehrOwYTl6fq@jU8&|z^YLe;rmi^7N0jp^N@r-JOe^B$o2a1QpY zCeA7V(|T2=^-?$}l;4jiwLjF!+HHu}^!rWJ@4!g&G1n^S_SZkM=K0pcaWaF>qGs0A zoT?3EE_HdK>)~U%xTU_n$(2d9XKPhQa}{$5`8E_R8K z-`TH->S_KMFN_=@QFU6jnsL_$I&ov53Of|H9}fa&@rg5aoQK7tJNEy>(0Lj<>miI=$`R&o0l;INzdoevK_1ZY*PHDv}Rbu<8_P(w^5$; zs{>r;#xo8M#Phg)?D>g!`=}CXNONUV#yw69Ef74wcuGYqWKEr!W6}&MW%JFIcY_!2x4}S*h~VHEf_ASfr1TJShA zF}$g^v5Hr7UOF0GigWG)1rs!n7g(hCAMO)b3;gQw4cb zdOGKe4Oi~1Z~>EBrM_s5l+r2d{@gm}F>uJCLc$J1o^Me*h?}0k$t$AC#jgx*i;g$x z0deX!Ql1$ynp@5-Pe7s=#hmhI*1Z2#l^VyvU#SjJN^=9GO_j-6cU+X3l;S%XbGRi( z>Yd-H9!WclXFO zxA)>T8N#o@DPGU?3|^2pwlQxd$~{UI3MZFYp9xRvsA1$v6ehUC!-2HgaKDfJ<0aD! zK6vz^p~WZuA3wAt2bCi*N)D^5V|7pz9Ub@*YcZ~ZHjWDIW^<{I9##GI>m+$}dQwy* z;)A~iFVK*y;JHB}#~XN3luoj)V&mB*cZM-G$;oV1uovi6_3%ko(xVB7Sh1kp%jDW( z+KmhgPOA35VyO!3t^CvtC2Ex{uU*KFMYDu zA)m8%F1pN_vm(pSwM3sX%&N)h`+fA#6V5bq{-%!YH7_a$0GrQc=?v%GKvgH*5j%i1 zc>w2NXf^oNO}Avr##n3HS2yF(MGLkl?W>mYs1^Qv6Y;zb@bW?;Q~<*IQ`a2V-6^8A zlKy$~VB&Bno-*Cm;hMC(K+Xz-LQ2}vVGNqF-;71FXPcIoArf+=E^3df+>TraSdPNos1Xg{Oc^gpPU2RjO}hl8@^waJ)EoymMq+!QWA`&>DCy`n9M-nZ&Zd3 zIzt`wNbglUfR(M%j>9cRmq4tS zd(>FqMX|sCEq)UolNf%kgsR1kHuXtl%HF(G_U!&Ma4T_DhmWztEdFx zBv(*xM8T@Y%{(Js&R*equfcHhn?j?dThPkTF*&&#Z=GfA9+5D z3&tEcD@8utzp$jGP})tMnuZTBm?V?SY!0(PhHZNjxpZUm&Smst3iVm`uy^cV=c<8b zsq@pPR?YO#yMq00DD8{_@vgD{K?MIG(ti;3KZx=BlAJTg_fmN-!7%F&^h#AW2nFR%TNB z4oFekkQ1+nlMS-Rf}d>_yGWGH2Zv6YjTEm)-c^WBsqlzUIn#3PTb>YfnVG`(T&=;P zD@bQ0RdYbff!Sk>8@q3jy@sxqtR6 zu3zyhZm2R49(4gYj?8448Z1$`86nwVQn`PG1h?QzlmHZxl6kL3NWj8=`;fk->*hpA zOuJt2^U8IIF!YnO%TG`{oypTcdE0wv^uYzPRcv(NdU24#M-D+kKtMnLv-yIwzGuc) zoXB=AX3=jWGSMtx8Y$^5YcGoiDn*=Awu1G83Dck;$cB2u=#-}Xr)2DDjNT0UB;4E5 z1%qi>k-)fY^H!M(ubQ}e9MC6QBrrwkC-)7#);gJrv|D5!xzNZYcn=~URfCV^;3ewJz){V63O5i>SL$7|x75wIVRb3yWU^5D{b^EcB7;ZT z+!8sNk8o~>4F^tNYv`tk{0Woic(=A3b7A}XA9}|rDmt+Vj&WBhy?0ETOn@yO^?r$q z&;A*4&|hl+}-B;RO z_A#wr zd4&6NwS^15BKr3m3|i`Y%%PPHZ5gwDinoc#{hW~OK?Gv~oMc##CEaX{9Np##wlC0L zb>wS2b5CGzGn(wNT#tCZwA0C*S~W5>De@LGI|fv-%ip460jTer?cD zl%ixB?@FeeT*@Q)hr24Lq5IeK8aUKVQW6}FtVXw=Av`c*M|GcXihJIVTO}T_ecaKZ zv32`eXCGuUMo&2xD?tSR-qd*bl69q9@P}e@4lxV?P*?ja^!QT3P&@9XJ}f_KaQ@<| z_3DUVCwf1s++h0oD0OzC^vap!Q&lInSA!6~=F?16z7}~T(#75LQ4<$!HP<1=)gtbL zoJr}i;c}~pluN;7Tp30|a|6?Er8~CK(rIMsiFw}QPl!j94Dob+LA=zAmF)$4hyfXE z0D-{{nfo{ajQFc$qb#TX@z!b)B*baywG=I;TCW9393yX|r!8$j`qhu`-zqcWq z)>OnnBTvx|PQS-9N>{zZ(1?-IqG}O)u3;fEJbXnCB{%#oKE3$4BcG)#xFKW+#jHZ3 zmXUw-eSWF=1SjG{W~+5q(l6`{VaU2GX2>S|z%TpX*#d;4%zcEU6TeZCg35YjCvn4I zH|?X?xD~YhIczFT;=-44)eH#`D;9g&z0GZKREai!LNVNkyWtL?wdYyqb2?e#u3l55 zO5~%OaA$q&ZjQQP>8?f6Kh8`xG2raa^Z!|ZzEXeYLAf!k&}d3Hd&Vpd<<_$Xe5Xv^ zai*jxM|O*|rbI64Bms4s7AcbXyvS^lrLkNIU1?|53q&Pp;A7LX=ZPv{y)Gr z&QqXLzKv<-Y@{B7{}cSdG_yJ4(#%O(DgPf}5!1}!h)XMHMy33Jfy213({YE=XsKHt z!y4tCFU(Q&*W(zH;+Htbdww!dM9Vwhn4^S()FP=IQosC;wTaIBhw=-^qf-n0M4H;W zFUV;S$}+Pv!rj8DP$~bD=|94g5$-llSAJEu|8WQWkEi(GCHReB_5a|2|I>~Cmj3Qb z57+>?j#E@09#bBPye2kLMxbk$sl1?kc0`y)dR`fDzS1c2q%8t}@8ajLw5DWaE6hwv z5-Z0JqWQg`LZICEn{>jOEo=?;agnL($DVNqV0BYq3>i}4c=DL!45ST)xuS5TSs(uV z9r-+Mlh3JYWYHRTRf=fQ-Gyw{d4zGMv#%2`%?J_n`X&C{pJIzuGnU?Jd!e=_+Ohm$ z{4Op{^74HtWee_I1;3rW*UYZ>;Z9LSLq-&lh1@qe|B6u-{zh4gdSouP*n0QxVwkEC z=wS}$^`xnP>Lo_K^-x4wCK=J$pjnd+h^o4%QhD8kmdhqN3)5)K!cubp!4a7yhEFe>N%!F1TlqxI*HBEf*w zHR5T5)x*j&7cKYJvSey57-6iE$}@E>_tG-Kxw(v^BSqI_a!MEyKuv#@q4Eq@%RRhI zaB(i<b=}At2 z4Az~E&xr%GXR&?05KK;}nCw{6QHr@ueVlViOXa)PtOk8OuWMzX86a zR!eu8FI^g)VkGdtll6f;^}0b{NuK4E7zsr3>1*?E>g3TzmRSEs{N_(cjqaSI1xLkt zW6d|=Urja57jyzF=EuttJ37;Ojvb$U^oHh}f-iKY-@7Nr!c@xLoahYYIihZ^C-~l= zpWm7ZQ{)SW{vnkJ39fg!8J8#pld%WJbQ+kY9Ud${s;V?iMRy*44-|dxqjzOOJ-1qC zCHEx32vPuL#Er?y35yU@xz^vA;j9N*+bs^(Bq`|0NsIu2NT;U|t22caG?b8+=_M4? zaI&QPE*_Jr)hWb`rL8du^xkd}TuOeZJz80@D?6y`=D;H3>$w6&C8)?^Zs)jwZ!`N( zJky|hMC@O(L)Ecv8%^z-TBB6*+FYAGJCbVc z1Gof6XM}B!^=f0Ol)O5qG^l339nBvjn==mh+E)?!6Y9kmbyQat24kZEpN$?ptiG{Y zfi@{>efP)oGOnH{rI*C-%eNwx1{rp6x6-GQCXK1-Q{UB<8Dv^5O)ExHmr%}rLwShi zm`WTQhOc!LzI#BJ+09P~Ljx6BXiO*H8Q98R4v|fY-?HSI9ERLN% ziEHP}IrWAcOeZBN*@f08>6YaO&oL|L?ovZaIyvy<3k{P}(}Bj<6`U$|CsNyc@AoBC}?lOb1qt zoM(#i9Ph}xc;+CY=Y9$+2E=N?;*f33y#Tz~Y^Ps7XVgtWqR-<)zu zu!};2Y7%AMO(t6GX`>aU-Shy%2lGW5(hhpXgK+t#nU)xFrZK4UGomqBmmbxm_zAJ` z9tRN#PA%v~6e2@eS^vS~n)Pim6~ft}u@Sewf~Zk9WmlxeiW0X2&#@CAo`{O`#OAB& zgqnUG$cY3Zpm`6`z{g3pP}5zpCf8e3O525wom*GL^HZJ%T9AEuGUjF4wW_6lmn-2Z zq~wK}yh96P16WxY3?b3ka>d!UTjk?47?_bfNIBdTw2Nvf&AN>*TMu5vc@rKELf8tt zQ~A|2Y33A1bQGPB9R53vm}mlsPWcopS7igomq)}@_mK^jjD&LYQNafbqD^%s_;RW9 z!bAS>y*c9~$yyzA+Xt+F6iPB_h%}g~;rfH(0S%B2h(F9$A(#se$j>1Bq$)XN29?`t z5P9Pf8TDJsXOyd~k~oMO)}*5m``D&Klx&*}x@y2{wmsmSZC3-B#Lx@(l3r|GQ8kWm zk&CYQ%i_@J-4s&Y(B2Tva#9gypXk_e>(G8qK-g0#*}xHhRX2DglKw0Zo5qe?f`x{s~B-v5hSn3S%F&=Y3jj0 z&D)fe`G`Rm#WLMVnn4@zY2uV6Tu#)Lz#R0GR$tGW;n<2W)7r$c$csf`or%OKhtfLn*8MjM$1+Rw{v^~o})x=!nlboSNqqz1gG#xWepf&%FQ!Yp44O92nr+Sq=BkO+1E zgqDSpJ;CmM+SRz`0<4Ofg54FOo`{6$viiH^X~!)pY+__Y?3ez(SpzLY;gG>FC5H7} zo{2B|V|e{KStPq?afBsHKHF7+ju>Rqk|$4SR1kA~5nn$USOTK+5dHs4VATAh{lU(9%V=|5KMBU3|Iu4 zv1l!p8@s(|{|%P!!HLlr$on3!2w`bG5+1YH+HczCY<7^EW(i7F7BaL1i{Xv2l3B_i zz0s0dB62HoRJx>)QcX`5Y?CG)| z1E@b1zp47XD#;dbMeCeeiA@x0JSAg~muPqk_7o&S8V&woeyD?5tK&im(IuZd+V9 z_~2xJV|nCgDMR2nZ=l1lrni|jEk(d`OiIx@;E>8j9dkvn>SSsk>IWaP&EMX%RIDJP zGD(4Gv6bO4hp}&c4wUFf0miZDF^%KGADBOhA~6rNei1g5QRu}T!+3vFsyL{AXsuDL zctWD+%wA)H=FDNPVV69|4B73q+0&N4P;AnJAGQ&3;B~=?CjwH|Z1C~CA*Rof<^-)Y zJk6f<{V0hZ0?$4<26_2G=3i|f8(4X%TKBgS|0G2_S@DUbpS8$gj-9m>3%cFu&+@i; zoke}M;v)&ecT$X70d1(s-4#FN&%6|@5Pg|Un-V6_yI)>)78g;x)0YBH&RXtfTK{MC zP<5Bd25iZ~t)MF&m~W*I#0`ANK0YM}nO?){>Fb^O6s`M^8QE25w$$*t-Mg7wI<;>h zz)So;`sl~Il_xofJ~}0QmpOGX3`wXX?*F2Xj#tXpG0pr-HT@5erBXhE39^u&zM1ns zz>0r#a3nBcWz26Cje`1rw5Y}~H}2$a5CnQaHo zT1Yrr_rLr;$ZUI!S`;S0TBMY8nOqHp)C9cvQqv$pkL^Ly?T0F_GgK!5a|%=U$qt!r z(w+mk3P{6=M3MUj5zUezq8SxWl^1LK#9?Mc=&JCYukKe@y5?3KeaIS@GdL~xfHJ|J zxr~h?#eX9Ut;QK%OAD=HuO@$DhjfCkmljW1FjPW@II+`aIW?OWhqW`3(8mN({9+1A zUd9e{KiHincIetSgiAv$&P|K(XG^+#Cl=_0&Y34qQS!^w05;h~q|<6g>SOHk2IVr5 zwlOokP@yKh>X8Vnxwq^rt_SU>@`=+-u7{u@*>nEYINRx>`pHypiQg@&&a{B&T(MFh zBoYbszFXD|DLtvrmplH|8f=kq&xxI)h6-xMZpfn~*q67?tsoQ9bb+R)^fM3fiBxYA zjx4u{ovz4@^kIMq%>VQ4s$gIKb@U{i>w%36^6NIZAGYfTDO_&3%AL&Q_iyRip2d>$_1ln z`X%kJZhT7-hv{EUeq-eKpp89T>fm)kKRk{HuX+6Y z_DYM1MV27T1gxn=0vv8RoJ;+K4YUCXdM!z$7*8-vjtXWwK|N!T=DY-zRf^_hoFdZS zPGV}+;WMn>E}agA51eVmG}cAO!_uYFt^PN21~hH59BVULh}o8rKt)w1d*HrbU29R_ zn6RS{xQvJyKJFT$+PgRDkg#Z42s7n(+>AQ~%czQ3-oxkb)W)iOq{KFeHtkw}uAF_L z30AP&w<%S(#QDrZ7%D##DTJyBq$ozs26Fonqwy{b`?mL8M=8AGOoUD(@QyelALAYPb`5A-CMzL>nZ^slKZ1;2o_!*y<;3F%dYAer#P90Uv}a^l9POaVV$j50-v!E@D42HHN2o;6K1dU zvi^yh;d3rewEG%k#lI{n>O)^N-*qvx93bl-G4QSl+v!08D!G)Z?Xh2QC4{qm_da>d z5-?plA%TtCdPOO}{N5Sa{N6?v<`Ry6S_E=TXO6r)5a`5v9s^Q8>llKL`zvy@sF$1> zJI{%7sx_{Ey??4T=djuw)1QyZYEM$a9fPO7?Cr1QFD$}t1r(Ryh5aL;%HBS57^fO3 zos1Z0bMZ_E#u4B6Nt?=JLjds}1HA+X*SmrkqeX(^! zFEwt>aZ*63A*x%E*4OipxKGJ9qZKo##L8_+SEK7quZq`$)crBgKlxaIjlrz#d}UC) zDB!2Z*Q;jK8CY)=<+PZG4>%Oa!dv`yL2Z*!x7{>g8(N0%sToL>Wfe}U*p)@G>-}TR zF4OF_Cy3^F!K4hX(DVsS4m?Ff41*u??#Y$O!%<}teL2(+-G;2nTI=t)vhi1;4NO4z z$1;I)Xk!hzA_`eZmq3)FEu!Q?9kh&JKFm%P%|cGh&dzr1U3Lq$#`~rum!xq@Vt3r5 z>R7__r_#eT+$mECV%slI^$0ZN)l#dkL6c=9DLyj`a}lJ0$2vCjsI0{Byjv)S3hA8Mi)i1BDZ9~008SZ8LueJ47hBh` z_|4nmXtuS#->X-l_p7bb3IeA!h4?KA`gU;1XvS?-816$djOqOgP!y+w?< z?cA`-yT-uFsCiRH(p$JoN#az}Y1LH_9A%stt*=(-u*NS(%NsObCOdcbpqXsjZX<8S zTth}gHl~bDhvBEFYNg6;8|!dX45pLzw@n*9Oi8eb4-1Xb@b|Tbz9QjFLS4g984C?+ z1Bq9y2giZ5!){Bu^=BE89D*>fs@_>q7oDrl_hY|QE|CPTTMYb)0sd2uyN34;oNr=; zdd6SN4jDGz7OS#wE`OqMP#Lwf{}}b@HL=Z^EHeZ`POk+fe9KuBouhCzR&*W&M0`5$ zChR5I+>BfH`5`YssW3>zNT{VE(o{q#KQVETTNjCmNtl;PocKY2BfKlKB>QGG3C~L+ zZ+Ki@96B$TZ$4Z2=BpQ~AjpMOa~96)8G=9E>)%A-h#@Zsz+$4!D6d_KlZM*acrMFp(=Xt|2Hr>(|;l zn0tG9g?DOu>Z~uO*{|_D{eCyA?G5iyiO5K;Hbtxewxc%7p|s zUz}UF3gqsJa6s~tU2uOW?^V*A**r7_g*SvoQ9zMh1h|fH3g^D!S9*$&T2Ku%iZ{LL zaDFxHaeCi?Ylr8b~Mt^nL(3^TA6pHx7PJM&-SU9WVOr5~BpK(%4=obJ3PAO1XdXAZU& zW<9d?dm6^u-oX^WCyjnkzJzSKwa&EGSvo+3KLx9n)S%D6)9`L9+lBO^D-fkTN;M{k z;yI0VGaB{iQ_za7TMd4?b|rf7n?nZ>-jYvD(nuo^I*H97xWxe5CB-HV`2Q|#bvC+bU(-&t1x--acVbp z?<4|93lIlKJXp-QoF?UeL zkAU2un?~(_>|=kaSDCAeX`Sc?1&i6)2p~YhNIE}Y%6wrasLd4=sWBIa@42tmz{vG^ z|9K;Q{uoulZ>((N3ycu)w1a`U`GV20r-mB~FZ=ftThGt)6z(0*Ce9clbgjL|fEhmMTjf46OTisY(5)rxQ6HlcLzWPt&4ayW;brYrF54 zMCD-qZS3Az0)Umi@WvasLdP~3Q^@;~x*z5$1y8_5pWQ~~r0d;mu)4YHv>y65xABb3 znguFvk%SGJ{wL+#+_HQN!{q*aDavS((7F9!(u}{2GQJWJ{L3)`li_;E6vF%E1@xyQS=G+vj#g;@EM|s} z2i5YG2rm;`XYUpFe_*k-*NH&Y`@JjID(N-AOv`qZOkRUT!&>fbe%P**c}S%IXb#XH zqCB3ajOA0#fGf73YvE-@(PyQu`0dcw8ms*kGCB`r>!rc zeZAf)BnMi7cPpl2d1EP78ZlUU_eU2nZw^Wm~EYB(?_Tgy?ls%6x7 zAw23iJ-f|O1t9L%!p|}*vgro{)!vNhjI$HawZ`QNME>&X&#ZuEcQMI$7>e6hV>Rv` zE(R~5>MiF{u}o?-5-%+V8%7;Vf6I8F5EfMz)U3MArYZxDNmOM|#R2#m$C9g;5yP*q zrTV$lR4YX#3R=70+~&zwv>w8@0sHM6GlDEaAZU-tOCIK7XV%{h-}Ih8j8Xd@_i z%v#0By~_uUyVn1pOJCPk&2~xfu`Q{_VV{*Qwu3azU(>os=AMv)|AR?I;GB%3600) z)84Efs_G7}s&Hoy9)a)Im!oCw2p*?YRUIaqVrgGKEd-^_|33C5;8FR}#`sX?_scdq zm221Z%Q@}Sy?8+JAvpha9K%0r>G$m|5G?uHR73D0bTWg0)hW=xm*w#`(eQdP z{Xtj9`6M22M05xOE;V~=NA5y-THT)lcC{fj+(Z@6nN$|6)nr6-J1HSw6kyw7L~TW! z9P7nkXs@BEAtQ%_R!(QJj#K&c*S}`=pw(lgW#dYVc;38;t&ZDog+gmJ%*5T#kw=tK zTBu?3#&bD;T5N*#RqB%RMgOcTqzzl*@cY}@yL&5Emyh}iH;E9|+Y<;?EBMbk-9KwS zsOX6=QOpa^R6n%F`c~*92JN-#&c5n&&5`DWmhT1p6hVP}bnJeqRmwd;jBD)M_;P^O z>hqd9ssTFWPPqlXz-HAXkDV43kLq5lus#N_jRw(`F8Al)E$xDX)|JghR2^hLr=^L- zMW!WbdKKfe)>l{eR~5>S+93MT@Te19N{tX)IWeLK3gAD#O8Bw>kwnb5D>uo}gt%7# zilJdxl-s{*s$p20+aGULdrSS*Y?27*Blx?ZyK6J5Zs3L65xH#~W;`awX4I4nfEh?& zIjwb-Q8XJR5~9>Fy-a^uz;Msgi^r&FMBCm3i*TV~O2AfJ4+-a>a^&jOkw@bg%D-he z?iuied}+s!eT0r43ez~bZkmAc@Z6f8&W6fl z#%oLER=SwW=xZRHB;ZYl9Y{FO2b^&k{dW_y8fP{w9M4v(Y<1#smpIQnlKOt%Uw(wl zw?`0LP4PWjjYDshb`SZRju1;yh0~c_xlGe5PJs9J$7ceRKqJ?|5`fn$7t9{vAwL*z z?5W-G9u_MPuL{*Koi7_$>g?18LSenaJX>t|&z%Ms!}~=kVcYnpF~(D>?H}B16}DDk z$`$yh3xp;@AAMk@`>j3wqSEt*Nm12UYPLJkBva@&aU>EIC{yJjSo

kVD~?2Dlc+ zWZId{dw$E=DEIb4UZ!3KE`gqhG*R(rAE?`f<-v)A2+%3W+eC?kL0H86JFoDoepEf3 zo5FM4a_s5?I$}xkE?nwhbL`@T=Ua31LwK!DT1yWisQ<1_1pHe6m%*2}NZmJ&+C15RIuPz!72VeKS%Kj@WQtj)y?uF~*-ljFUxORRdt zG}{$vT!*eH)ZvbQ&WyTl7@eKay8`p}==Iap4e6!Q^NxqPaAnrd=w&nVF6%ik)otpD zG4t;0VY1Yn=&i8uUh7q|);)UeKX&`b=VQO8`PkOAajH0(FgDJ!iOK~;Ps^Jy80ncQ zDTty@sG?E+D*tfkpJ&U{`)J@$Q7-bi)4K|v-Wa;r*HkW849;*Q0@tbT?|bTGeq7XD zMO|hCu)BjzhtzP(<^D4c6(`)*K%`K@!g;%m_Hl}-rUGD9NKxkX(w#~dZ8ntNu69=U z>oRp+2!pD8r7?DO!B4vsky9&h>tv0fvqw9e zfzq2}8xavG0X1wlsWLkOI&tjLqxa?dhJQJS(*D*s@cgYIEvoD(i}7UA5Qc&a=K5qR zOMzMdUklj*@U?aTzE-;z06vtz1vV=pAsC@d+Bl=I#-h8TkuHKQRx*){VTILf^46Df zO-0v*+ZpluMosu0%g@j{bVQlVM{imr)XGYnVDND>wWXv1Owc0r!ipc20F+NL=z!^%A>Jx1_cQlw$bDR5ke6eMAhO=ilFLO1-G^PaW7?_iUbIVkAD0!V08^&rhDy(*fKPnM? z2u`}eCi#s1iKypS4a z5B^1);u;JkEQ7(Vd3+`%8T}_HylucemPkJh{~~yb!8x6T{(WdCA;W;zy5N(u@XbX* z^nW4x$*YCy2yan+a@GoW8{b1&mqP*Hdj#Nn_u2y_g$^Jo-UE`tVXGM2n*az32kyf% zD`STm?hdc2uG1F`_@$$tP$#zOp{!-cF=y_qpV5gnDYP_+*n0CyD%rHda8wO`J!5p` zl$WdHbxP>ySkvA~*_A_NUC;sl_IGJby%x_N6I5YglpgQDWsPKI)ISk?`?h7@o63e& zq^4%+kvv$;A`z|(@Q3O{*g$$@%#?}h6PF*sKge^Rc^1i zo)Vmt0DO)3i)2@SAuRTCmU=h8J-5KEd;_nC$=YJ>c9PD`ZFp@ zwIa;HC|qIF2h7p;TEUqS!%8goAQNFlRfK+0=d49M_aH^hz+d#kbx^V)%>-fETX;c| z#A~%y^v-iOja)@KDc=&kA|1#*yYLwlJVRMCr7jIYD*$jt zm%izXA^SFw1i(kV$ylMDAgmjw=Dx=SkV34!CHW4g>0WOb6tNa_Sy?F50H|4x$4UCN zh)m9@39z%8z5*cZRRcqOtMu>A&tK1%g%>w>YU{%QQ6t-Gqpe>HRYvcMfdF0iN&b)lT~124l0bl{^Hktx-faYEtuPLQARmc-g7&SjA z{VS8`{AQQ67z8X7odW(E_#W}S=&Bmj$ z@9cVgU;0+AMibXp!Uek36iaq5Wg|n0D)5w{T~!LPu6;qns9}u>#pxqbv`2h@z5l(0 zOrCt=TW)@j_tfIKPt)O1m;2|(EfLidg+s70HF!B_O(lk~=Z}Aydh0%*skiO}nmWnT z=h)6YEIg6bT3p{Z4Oj08em^D^O{C1F!J8@kc&kXFNiCDhSjCRinN&WJ!evD*lg;SJ zj-;9n$zwDD0zXX0=0M&o_MJO=*^DL>4ukEDwSqhP5?dS- zOT(77G)0k(_ud}zxfcdT(Us04kS)*AJ;*kespn;qa?QCIO3p(YM+&7;9-G@QxXwbd zbZ02*lZ|m{z?|->)HZ7#pEI<>1fbF{{!)!tPYXVtqi-Ee_yD~?8P4FJ(J_BoyC69NgW}rNX`8--h1eBYRiCRR{3GD_uv`%=g(vi@AXF|RU@#%b2o>L1?3 zGMAClz%^D8)*!JLPAE6-KlM2YQ$-&$h6;=)4>`wEKoQx57RFc4TTI3=m%%ghl$HpTNvGDTkv!6QF`&bUSLLGbAd zGCzecC`!8xJd>ehkhP_97R_k9^~C!jio5Jkc{`K)<$#Oc$9hKYEP-X5Ib^7;LXd7F z8qn506u#NKhU}IVyY3Pu?*2OM@nbl_jAY(gHhqn~N%cunQc~dqJGWer_?N?<0v1m75JL-@s}Sc7 zF?%CF53xVUnv26wM2fLJC}dH`0uBc~wjJ6nH+o=TP&F)iigyrqwpfHXXMRFtENO5j zzCdB&Po{6Va}~(-sp^AcqBw4b9HbyTE>kO{%Vf&W7S)*OfJy!=TS{oh{T7`ej@8H3Cn*Wl% zJ2N$@JeKfYJi~!Ivz0^D`T|B*pvq8PRUfY1Xa>1#+HFk@VFL`sNz>MD2vUHvb`J5%a~Z5*PimC^DhSv0gvX-dJ{$xs7p5>o3T7wAif53En9_KlZZKML zrdlJP^x#C4$Z&>!Pbbfdtkg93fn0&XrmtIA2KKqe)=*&SJ(!PA+IhqP=LrsDype zfv1GCf_3V^%R_6B@VJdHncl?NSIZi^jmQu38kX=r|L~)=WU3P79XEWi8L)vRaBZLS zD%G$eAGZ_Bcs@i^)LhfQ8M7Z7xzn!E5?Z>Zw~98GM)%FTJD9naD5_ZP415Ue@hAs! zzi>{ORm0w4t%w*tfxZ~19gKkUuH(zV=plff#qWrnlx*F8$mVox5B{`p& zQf`U`pT^~RHSVwRXPo1ue<*0}0A8m!icKxIQi`8%Sn3|H4hDT(VZZ@gc$L%_ekfS1Zr)};M;ApGh~6Dc zLz^3g3>35sR{#3J-g?&PKDR+E4REwTuoWoSi7%`R@cm_9@mu5(xV!fEK?-@}4g6%bfciLb73sXK=Bt6d(uZfHpT_~8)6$b&B5xY) zE_(~&ld&42^B1yf@BluX&xR$+-uMr&NPT#EX#Yct+?S-ec#YUb05|vr1u%nCxQ&&4 z5rq+kRkboOA1^aH+7dKID2SFfDlM5-MNgU9$IDYV*QAj2|Bg3}=N|Tc#9#kI8_(^L zNRB%fL$YjuS|%k-wx`GNu81=1)Rcbxqpe(Q`-qC4ij2%{LKy7NwcbcFP6?)YuQtIY z)bwKfns%!b=Vl+RJ|JKM7n}@i!){MTH5Kg?iAmq1HWWP9Z>j0nRHX%=4dv5&wScFZU%EzArLdNmp)QQHsx*0{3NNV+ z)hfM%*xW0Nv?t0@qKm9qxsRSypQ&Eh!J)m$ALS_@6*EJcKx01!?iPqJ=0sn7_9%by z!?WKC_Nz7H-qM2jAW}|mHR`|VGVSldh}P2<7ph5lyrx?-MLnJWM%q#KwkC*eOWs8q@^^y z`@AsIxBIN$W$6z66L#S-hm{A3X+EU;&THSpUZS=G*oX35Z|0;0VU z#(ZqY0q$^nXn2>MN`p7u6wktJ|ASNyeO%Y{N2PS9?&wz9( z8?hq}Gc$%4gkDaW4C@AkyYNuthF-(b%*yF09HQVEK^BBM9Qv4IiCoMlcJ;cA>iPaK zy>b)QbmKy_cD_`|Dv{(dpi3WJd(o_Og7+XTkw%wU^gE3#k>jqo9dQf z`mOT@t6}~gA3CJCBCzpxa5#5XLu$y)BW?byhxq&MzWf?Xt?>r1U--gd-@> z*gSoC@G){;W1e6rON-J|YPm(O!)R=hnlA--i*8#BpCpn^d(cv*4HX6WRhGR5EN&!h zg+X2|rb^}NzF^VSTs8^5t?L;-Iu{RP>f7%5d>gw)+Pc%i4A z;>Brc`n|V}FO|H`{FB9(RU&xfZmXlfa>A$~ABl245ULcNug00};-UIV?RSJL}i zGyxJNtD0-R$ghDipStD{IIh0VCvvRM8Zs&eUOyyeienTB-I6!cEf5*|O&lEiLLKq)REYF7aZJ0Ab+og1RTOmxJ z@-r%3KNM|VCcoU4mmXOui`?<{0}t?N71+F;RH=#-ej)}xJrgTN3)xP* z(jt|p-(5B`Dqx9$4UoqaG>4F?^=WXfLemI^$UMH#nqhb#5!Zdq3}(lr5{GkZ+}Sw- z9l&)VOcl-=RuNF$He^{RT+3)2-Fol`vFg3^5jvpjY2|m>y z^GNIFPmf^Y2JMxC_pRirEypN4X6STR+3hrOj^g-aBhYTUfwi%$)b zCq4+nyw}4&Kt3_9ZVcJUfV2jSLPH7p2l;|M5ZJh@x^-K(m8RrLCi4~xo%8uz_7cX) z`uIGr;8i=ZbC18~VI9y>a*shm5tOJ2L5nZ)s{Pf+9(g!pRCg~EUYunB&Xoe?AK^xC-NF; zT^zfW%aOlWSzS>rkJpzG_ilP&sH+Pm=g;T*fa! z%qD=DxVkiiP)YD9er=jqcEdWh8bil_sQ|Uz;fJ-#Kq-_{sr%>e;o7lMpwLG=mb89R zCyVBj9hy&Cj^HQK{f+oN{O>XtXJ-A4Z`tJvf&;nF2H^{p{qXB@i;F^hqtwpd7O}00 zgpV>DzTi@kEUrFlfLLtq|fE@uv~yHnG6r7^Q-)snl13 z=vtXXkYC>hqcW5k1uXnskp_$4`=tUzF^3<7az6hlAX<@f8>I$Ca<+DYB^)&nO`G;b z48KhiU;nRXspVKo$at~w1i>0cV**D9T`W*78wm1P?nbCF+eq+RDCoN6zY}|fxxo?C zFm6ZqBc*T~O$uQ=&NkS-qLHu^{sHxB$Cqkii{3~J3rw8d4~O;<{wgRK{^M%?()Zix z1rT-dBi7aQJP2;b{v`5w72&6cfDgiT;LuBPthq9Wqvq);bGVYio|jZubF=|kP|?vv z13GfgSD~&CWZ&N{lf_ZbU+^Q+W+_B02TLM*Ye!b;5K3CFWAHrT3?5hqH6_yxY6SfX z+z2j*OR0G0PZKB6)RzjG`SpTr`QF^arLT~y$Cz|h0yC=d{2Kw`!mx|f9!>zE%xtXR zOsil%R-~AI`T9bT_DEE>2+>R?4K(IFI>B$&_mn4Y;>&hN?4Lkt^l38WZM8CL$G1rH zjGmlr@Z&I)mmn*O?|qvh(#VO5??J3-EVoh^h%G5&(hse02Vq}Tk76>(3qjegCGtd> z*xEf@C%A(MugYyhy;03j{9v;9dz=1@lI@LRdPl-X?;G{=U*LXk=<`Io06{G*m#;}N zt?EPadxt8&tyPb3If?|W%np8X4=?Y|)>doo+iitw%=v1g4=T!di&2E)Qf9o~eWVdN zeC>C?>Dm$D|IWAuM~tI7Q0W2edi`MmC$b{%CXmJW33A=HaR_Uof!E{4d^-E;cYYAr z>8bptK~gM;`~>WLJyi`_(SRPdHdK3*r9&Er5F5!mh29QjevJsyNXG>^gx~n;D@k`C z)S;efR8?i@fs)L+H5#ym_6u11!UYDrLD#ApG^on4r~9oNi9swu?LR#T4eUnv2@gs? z4I|GK`*Hu8ayc<=gQbH!3tz3u*ffmEJlHZpg0AonN@1vM?`M^Y@}RnOkNoN&{-Hqv z=Fmm1MEGa3_K)TgQo2G9FOz1mSXTYgEDItVUkxF<&A;G2tHVN+Y|LUYV3a1s;f^+! zic4@fv?fA2e{If?V4B+ieqGy!Pa~=SLE=&Pr2hc1X1`lwQhN9d1IM=)n>Dl#S1+!tGm$+Ge)v}Vk>=nwjUBIc-+|7affwZE znf2V=6UFA4eY!g*ilO^ zW)O`+P?3dX2y#(WWoSoaIXRET?x1=1GkjPk=!HFA_lFOlEW{9i36tbPP6V68NCgw2 zp*v{1)m#pvvrurL5V0dAeO5t|KYmBm>wA9wT7#suxjyYGsAMDm4)Zt)7i$tKir_sp zj+DKUFLZVtyFkM|gjn=UdNSgE;Xd$LBhX7YYqSQ1+5DbJCV$*0;3eF549dMYUp$jP zFwOH0b%LZ5$E5tWx9o4_qbW#&Gf%}oej(Xw_U44!T-!r)C-18wOCOLTcVZ_~wCu|q z^qJB003ETn@UwJlzuTA3fXDKI-t!i1Im-Pg+pUr%KxKKb+7HpG!MV!JEVWu%!p!Km zRpzr=dIEpP5OB1J;P}NCR=FaqqhD)Dg`Nma6G7Mkp3wJ}bY zEfMWP<`Ujc^WNmNM5J)z+V;^(+fP%9X0W~ErKGVYUp$+f#aC{1gxFg{++U>EBN^Z; zMYB%+>?_6`v^ZWw+G-|uf&B6Gl{_Z=uUB3L=A;Y`o*HCG_}ar2O~+G3BIGyfxlYnZ z3#i0QDZlooT3yReH(+h%(2tlTeQ&kM2$JgKyY$!R<(teBTq!A{D~@91Fm~Q}BPyt? zF%ogbra?ReCG@q7?BeNS#OU>{z)=U%qYc>XVhTRx;+$VM^X= zd@{u$+0+3IhS3~t77Smw#feS~HMA)-zHWeX(+iTs9h=P8BiI>PaCtQYXQkv+iv~}Wa2}#4B3KMUFGdluHo=GdvX+M#FG0ee z`4sV~W~#&aU%bZsB22&&O_iuUTKCa!Nwi!K27|*0zn+r#fKbPs+d_l>Ws&ZJ1!hLa z?fsdJ-}v>LzDmW}4^UDTtrx$lAkW2`%J%geQ@x*f%BP~0O*E+uB1d)a2lSl>u1Px} zBTXQCUvle7PP8LCimTwO=`)NCu2#&4d+W&w?$AKLP>Ik!2C+`yo=AWSB)g(E|Ce2U z%kKh7jEaM^q;kfP}VX=M?-*w}4H-p`j>%-J}_Jk+pIf1Wj7YL0pPCS#8^9|J92 zy+$6DPZRs8)t?i~BM5bGoi+ktzZDlLDDPOFQ4x}aP2zsz9U61jUKIxO-)!W9=>nuTPsA|XY$$$E)UMhTTnUXl5*Et z8uxM^ElcOvUsx5XlWKCplBZE%>+^wzp`oIv_jbDrq@0ToOk&dp+GTqgOJzB=&r4q< z=`gM&5UJ3LXso#-Di|P7_fpik?whvFq@O%sNq*Wyo@Sv$6=sQ9DLvp+mGlE0$du;+ zqRCk{^P|g1xbN&W#OppuruU075aZm^W zGW-;$#HZXKc!dIV7F^uKsPavv%<42RB+OM~NpbYs{9{Akd(76xAaX9pJ*!}^Q}?I? zbvwirvk&_>U*cryIKbs4{FGvm1t6El5xY-zCQPUaY@yjKv`7pRnO}ZpzOy?CMcDmQ zkA=+;FV?o(F*x&G)5Y~N8I{Hj2ov~{>9NCt!|AI&bO^mPHoDyRGugohv= zSB0SA+wPAni9SF{+|(XVyx&!|DjUzUR@D7~1`?$03y0#n@`jZkoR3+- zo0_62z`_V#z`c)LB$!NkyGXvdBnxo^J*sAW>n(PHv+yo4403uc+m4xt#maya*!&%1 z^A)ZllPN_CDZ7<;7#AIfryNbxZbmz$4ArGG)7{RFDE@0yarC985pMi#PpdktPwcQm zRgs@uF^GIxVQ_aMri{>1L@_1R%T_aSWmO>;Shmfus!v+B(*~Dt_%cSSf1y_dwg*I4 zlYXFO<-Iw=d8?E|NSfEGFlskW!&gE&d)Cd?c?V)xPtX$*n*zliU6AT~g1sfl7A~EB z@MSYG1~|SROQ>z^J?A)H8{GQ*8;em_xu3`<_UFLgiy!A=)zE>g(!EY%jNl0*%G`f4 zXsFTW1K#TVn@ur51o0~ddSw`l)S!HL0f?XtS59JH7H*gCG&?fdET!4%7|LnO$PkB} z>Ve+yotym0w=E{@aYjyg7>clIOhhrKE{vep)SB;ImURQno_skYuEIQF131SnXJ|>m zl>}1}@KkiN1>L0W~y$P}k{F zR+CFd`YuuirI;%2c6Bkzo@=S5CCzLDJW^$fk+#tJ$T-RUw#KR)yQK+$HUNOGT+GkGAAbx7#6D~Ak*>%5C{zjN&O8QY?Di()8rGUXJ z*=x6Cg^sQ7si5UI!yp5)_EPo{D2eGBHLebB06)&5{Ax$p09#djg})*h4tyu}y^;VP zpTrt!?+c3jbB)$8Ul;^U7cBL^|5SP1XPs{JC-`;TQE6C<2k@$!=~KS~O`GHEnUdER zM67#)v?La2Dij<=sWH9N`kf|^sb!>;0zMAi9q@e^htUYEl1eAfg%X; zh4MU#<|2V5yMp>k0^!u-&&_Rcb)m1=n6ACQWA+}LGADmN0Q&Mg0JDI{fI2kIRx@C( zrBg-?xDp1F;ol~BZGkNoHqD@cZJIowW&2d=D12z0=x0Ss-Ogk0)+zckG`xRZ0}(Z{ zi=GG<9V#zPi}{?;EQ$J?YBu=nR@4oV(Is6~YT=PP$odwooqFK0uj@C@ty$lW$4iY`85l!w{Xo#3p;g3+B zb;){Lp$OY@%y*PD8RSFJ5KB^PStlq<^q$c=*^{4DttEX=YgPs2LjkQCTVvb(@Qb2J zK?rJSK!5p3Fcm+ezjsqCrQ!-yhYd27oCP@|Ft=HAatKyrAuTz30#*t>2(`!aj9rY;u)R33 z@tC|Q3(7e{RY(FU=o^(F_FMav*arIraU>ePfiysn6#iIy;SJw|?3x*GWjMIc%oMLc zaB)Jow6z%`k`1`fNx4I0HiU~SN9Fl)gx6>*~_2p^0ONg zxc3MKv4XhvD>P2kh9l|}ebZc$;a<}5dg^e610n`W+dEhfs4>PnC_yPNyMkeL%CHSK0hW|)pD@SQ|!4%qH6O-V9Zm_Lr)inha4#To!;77%ODTnsu z-9o^UeT~YonVF*kl{~axVlCqCy3K}LkCCv0CG=&io3Tny(!JnZ9lz;5)F1tpzO)NLso_!vI29UOyok>TnZ z9AFEhIMySy>Qx#tO^M>KQX8$*D6P#F`IHQ-hD{jyo_J0q#-xz+v8i_6HU~X#n`=Ge zf9oj`<46xxxwqm#$-3Cm#}?eVt)+Ar)v^+XE~Gk-OhvLfr|tlp?0-2;0Z!i>&d(Va zBCmq8{*?ktypkGz-bS(c)7r}F<;uV zcMq22IW}}b%j$wJzY*cyK-`v|H{HWZ#Tq68{jAycLzDK;5#qtg_iJzZppP4RBjQX; zBbf<;_hxHJdNX7C7CvgKAGcHrJnp46P}DJwm^6~nFi#e;;{tatTuGP0gzFWlKx?S+ z3|+NuO;6%|k!%~1f^YEAAoRuo=}%1XWHj@-~uDN5$19I zD!QaX=MhOuV$XlwsbbKi7|oegd|!SAv7EktG6F~{_`_-5yg%(h{l9%Z?))RB$!ql zC=>vN{FL=ha_#Y&=hVvz@txm?s={5FS|ZqpX)JfMnQomTS`sgDi=MWBA4&iXYU4F) zA1*7d0aEN9k(v^9%G)ilF(=#1gqeGTKPLbl2k5BqIO{rvLqdvRN{I?(>$t601=t0F z-YO47+om4^$5?$^Ywr|%f(RNo|4ffxci!jG3Z8F6HSf2*emZRILNz}hr2j#qXX1V? zMfwuK_gjse=eODg%g`SNZW=S+^PlY8fdM-Mi8bwa=V>Ibs@w1GwxKEiAv!O%hV)E- z-;KuphZEN33r`3=^F2Q*x!r=M{1W>w2Bhr&$t3jHv%Qr(6KPLHNGeHCW={U~skj*WhZ95;eB6;|6S~j0*P%L7thm zp|~UB$*sW(GBSlHsfGrsqeiqs&P1X^IMir#%mRP>g(-XHuOt!tF2Kt7c;=Hp^q{<) z$5P;nOu= zNU=bs71Bd@_;UyOQZMgvVn;B`fXsq%;QM6xh`p_+qqMO*Bzm`*RWBBG+l)tozQ5 zuk9S0J?@_H)CG;jem^VJR68{L+&!V8+8~`%9xsw}G&f|xEx!D?rGvX)&uaOGatnH_ zUr<#HmHw?J*^X4r%>L^a?jQf4@CQI0OT#(uf(kpUzA|1LfBt3wch~YJ?SByV)^Sxu z&A;#ox}~H;x)G%jj&yVAZjeU0;T!}+x*L=RDQON0N`sVigLJo)Ao^~e=XdYtec$`X z{e!h;X3sjnK6}N?d}sEWT}E20F`=f4E4o}#tKj45onqP4k`yk@PYi{FD3XZSdamyK zsiO~Np}C{MrFN@sP~TM|qbvz%BsB^exjG$yK_KjgNwCIyi$_CzibW%xkYcxb3PH>n z1wcM2)X8m|kLrD(=Ut5Y3!Sg`(tgrho+Ddlw%i!gen76wZPU^?SlTQUR^K(w+X{`e zxs!lIuEeg}e-LhyIK4$*aPwU~_5CR&`I;MYG3EUVp=h@e1ZCOtNK5o5oGBR6#bT!( zI|kChT6y&uE$CovqXo6Rlxi83M2JK}2FZH3p?TIuJhDCS3vVY@UR)vEyH$DDnUt|3 z{wMz&yL4cSqXo5G9}$LYi}hVkg^CiEJvG0iKyxq+(fpM^7+Cs-n-i#YEf+DR5?`3r z(JuCn=pF{W-w43sk3W)8sRWgm^JTc2!``>978$v8<%62<>s0o~(0R|i5a>(EnRKAR z;~Pi?hW&67keRA!An9p@Z)#oi^Mnl}R0W(LfkeyQas4#s=I_in13RlGs>@ao} zHc937zH(fXROxul$Ecvas~?jvFpowr82@+NmOhLtnkL}8I_<(6rZj2(l!`~=y8 zh?ZXBqL|{-;kD*xHl9pQ&!>#IW_EK!_tKnERAc~~{K)Bf>U#vojJ=`>p{;ScTmPB^ zAB)ydF8H{W_kA}D|l(cw_qGq&@E2oZPzvsg?N zx23Nz{>{T2_V6Hg{U%q95s7{d-rVF~T8{}J5`rd*7i6vX4!ZP|i(2w`5PZmz{xMiR zSiWdJ-61K8_`>nADnet_GMXRTo*JHAz&lP$I`yk#p=uK-rC;6(xiumdK^{Gw(hmM-{QDp!m3GJP4f1@HQXVP%QJ!+?yDjr z2)wLEO6TnRN0m$SW8f_O9m(mq9-r>Bu*lK2tipw^P^Rdw5(SBGdhU{RZgf&2t4WcK zNLn^D^pOg64G$0^-**VlM%IH_rW*3H$Gs0Gq}4hkkXV<8OMASO1+2iyAv}P9eBb%M ztw_F%MFFo-IW|K9Z-9f!JMJktTtSF&dCZ;+wE(WSV4f4Uy_Ei<45Sar&OODKFS#;q zP`+F)regJU*}dCFsnL@RdaZ|0d&?&-e_Tz4m*5)99W{As+wXOZ!K}Xre%_sN1O%f# zs~ODm%zX=oOvp1HXp(hj;Q!S0v|N@v#PoqYUwaB(14Z+RpVq{s^NG8?p0;<$WV_bG zPe=KCyq;byfB(Y;qJ@bkdeN#zl-S6Bh&9uQHg&YbiuEqTq!rnPF#)9-2m)Sc`bnYJ zGv|~q!MPT-h9Ts>goz;(J)9Af2Bt>nrT1piE4PzdhXgt9Yb?jteGNrA2;+9-fB6M@ zGwAvYDZzQJ*TAZt&?c(%@&!o6qkt~$-c6{(HBD_8 z9y0_(;bR2f(ZNsfjuK5^E6L;^d=zjE1Pjffh0Jtdn*0 z^DBy1(dquPVxT`qE^SC}eAS!yg)(Jkm&D)*_uRVUh?gT|jrIeZe@*&|xsM=@CG7QQ zF?y>=KYuN*v8#3gQ7k_j517NrvlMHnFKd4QJouG|^XllPfw}RAEE;OmGf_?=%dh`c z({ZC}`!DsNftc&a`>yFZ{6jS!e<_PbuTJ2kPk4wNl{5n=yVHFF zj~;7dKlI{U_8L9p2Zb6+TVm~j0K=S#71F?#vBMf`b|ueYJcq-%oma5yVUy{&673(o zU>4P<1GHrt`x97sIAzh#L6eTmmsE(E^kgw|c0{hYigu&8v)GV)-2h4^Dyr(rL?Y#wXU<$)hR-qA7&?bEmRT7K3sSQ zP#IR0pV1njXeCBU#4;I^tB{`VWTE@Fn|`AS z8u^$T*WaULyuN$IKgoB7`NCCmpIJVUqRzxjbnTsU_Si9Z_^^d>4le#AfoHR$nmIrS zek#Dw?UJkT>WLIu@hFJTHsnLAN`yhwh}1MlEHUnk;s%@0p`c80cp zAD^r~8cwbIeeuz^UzEk&_L9DK*IRV<sNo^q^0fjgrEM9GQM-USc zFdS>-azWtHDS15}py}4;nn{8ajFBls>Wtq91mvww!Snc2A(@KW(0Xvw4{8O!WfMU_ zu$b279^OK&6@kAA9guuYvv%}WCls`>^Oi8*EB@3+rUC{!@|3B7iz)cIK=2`fAE?tI z%=ty(?m5>uv~Lp-5dLsXYI|x_$WuC)E&3^Be}guU3`u>wYU-p&Hp2^aZ0@ovO>cE9 zO&fpIxB!1f$7d@$q2a7|FTpJ8$)=T`lza5 zY(KMO+xRFy1%chZ|N5sx_x+Sp*j)u^M^DG@Ej2IHFX0I~D1_dZr8{_~gA&d&MgboQ z`t6f3`)Gb^l;gUSX3dok^phdfyFjtn=r|Yb7_+4rq=L=~#`Zi60>-6?Dq9Z#jEKRj(d)1;zr&?6RAW7GWfIu&J`ax{l0EjOassJ&g@Pl}5#7N-T z;P&(F)!6#HI8m(Xe)fxli(?zlTEjaW!^TOyU?*lxq&0z%Q-zukW{%)7D}5rJh36^u zRKNHf%|*8@py){?_F2J*(CU`Rg4mk`;bybbIifkspZ?w+t!gnl9Fv?MqhzeBh&jH& zv$H1SHN!JF51cYlA(&eSpB`7YyI*?xv<^;_CS zE>7i8NJh@-U)Z0Br$s`*981#7saf<6nZ=5tX07=F7wdW-N8jd>N)Cmh z5ygNJXJ1uyX!WTTo+XQZZ{{eqBH{lyvh`31QRB4`RF&C1CSZbVLpZJ1GYHv#q$%)t zGK}-hpqLS|n70)cCk{7qua&jKo^+G+OGfMbw0_a7-Zl$u+I4!N*e*FE!(k&HMU9%3 z;kaiz4VdZ=U^q1*^j`W+_{V_IyV$5eFVf9DLsPOj=F8Xfm*z_m`l?W0IdbbR(~90d zwPg(g28Y$VlUKhR)0rpW+8;`SAiVbDd`-n&G)}UJRR+?^6EyjBAC)wJQC;>3>Gp)x z7)%ipYx)w1#MPEK^K*X`@$WST;^6!kg}9+jok!eG#rv5VPo2C|hbg+mYF??@(MHKw z8}}Xyc*V>7l8~S7L`U*ZU=$Y5#Kl*?euO28amoIUa6Mzzw)HtcvCBgkh=xJ^3UQAQIVSwa1xmJ8bY;IXFWuRiHAxqX^;pvhoGo*ET=3njS{5a}}Z`nopVeSxa5B`xeW`d+G&-#nS9lU5!$Tjv5~E z2-b&n8C^ zLb7-nIszed;9HYfQ2CR1)fMvAY9lP-^+m7z9Zn#Ableq3hy0xcTo4w5QFakp*=E(& zobTwGpgC_(5B7#C6XV`dMz?2@UOgiXOiOAV)B^*g4IW%K)kHn)i?qBUf ziz>NQ{>`&rhp!i$`J%HCwaxjc~Z4LF?v^DbcQqSz&bL&fGBs>9vSqtiya#sBr&^V`*L~seSf;P zGA`M}HjN-WQ@WH1()vq8FUqidSbD)I$r1c6A$P}hMEiz_zK-%?GpIwn(>SDGXOd64 zgFP);N`1Gs#j2?)D12nK)EYtTIp%<23o|k;R8_AGPEFc(7J2GaZM-=o{kQQW8BvBL ze$cNs#U;PF@*zL!6ZNV^3l(LafAq#0#s>xFfDq4`<8wC;j_anf`PHiRNpnpZzy}jA zAcb~4Ki|6%giE@Z{$Y~uF36cAB5XEt8AR1bBbmp*0Z}I(&IbkkQN{DJpTSi5GTc}$RU778#8`_5vm9Zy2mogiXuVA3$&b2xw<$T(S>)XQ zXWv-4EV5z}yhbE23kmBdze+m*6#gpz9o%DL;fYL0ZM4zWcyX$z79}66FX(|Oq7|0XMTxLNl8V>SazFp{txj3$t0&Wkvw9V1PpI5d(e=ed=NLt zKZtw(BleZ8NglaQN_|dP3s@PmXhn01ml;P^z?q?NAeaB$zUMmA-~@JV`RtUG)?fRlEp?ZYBX*znZmlQ#Eb#_mqu(v4V+O63GK9cvq@V$0c)cap6#~6)3RS=2gGsun$uZ`8E57^uO(Lkc%Hnvl6{kFG`-uCsj@4C+g?|z8FI(9m>a7Ea4yaGxxDSG zvv=t)IG&v-G`4B}h95e^LfqMXM71Nw3J4x^|p1a{VEfh8aH zFc8m#b}$IO#CDiE)|p$yvKfZZb{VB6{>xbF+8e$0iD``(cbD zr5|XD1LYhU&bR1?qPm$O%uh4>FjcH+ z0J&}##sWs_l|$7h38W*(H>6>CC0Xr2Wr%OJG#$129fi}OfJto1wRV>o zkKvP6OMC2-C$8@-DTg>~M`ws@pL)r?Dgt>fMXiyIvNAo}~&P1ecnLS9CoQk%#QUhHYFLFGDPeDJOKEQ(8!cGuP zAv!^y;Nxz4f$4cPd26oL}e-G}pJWtWGeE)By>w7LD3(%J>&4n%3z1#&4suu{2i-mC3dTW-l5??9zyc6s zGxsGujgZ!|o2NwDbvmSFbKq`CJqj}$ofS$9vJITAR^V;J$3u4otFtik z8&Q|dOfXXs_;M4!CA4UViZxb9AoU!}1S2u>zC-RooK)|%vXXM47T5aFVlNPx`;W0e zZ1ec{QTCyINQnwqpsFv&rAFW0tsqu;aEeH}Hl^R@J@nS0`B70gdzGU8!^~ z(UJTm3OVgefOtCtRzO!bxQMIwsPw|#(;%GV#lkR^rE-GMc>MN&nfqOqRl1c zZ6__MyfW~M<(`sFg;?0(&+-rv5nCwM59M;$Jl9Y&F|k%-gqH((6=MJ6O*F6)rm+vcD1!v-)DTPuoV$DYH`OG5eC zppMjyCRXi-#B=lqu2FoE&!w}tYL8y^oESvvrx)4J`?zR`m+OqPH02x0b!4Ocmb2|1 z`WV}%;?(l;g$bWZ;fPRqq;3h}7yNxo*HBsCc6?F`ARVOw!;RV*hT!43G6jPuJhc2{ z2VKLO44+^m%|y)I-!!%4m;0~zi&Vq>C(Zx$ObYD~uGzpwWOGE;jKP`%m)^R@awpZ-!nNS__ zGGbqx-<=#h(4)1O|5C*Rjk8CFtkxCxCUo_KHV*PSazk3n$xP}B=!uoQOcZN5j5;%9 zI-{n@Mu;KlL;o<4bsV~jEqcx0K&bk$L)NKah)zYcIikDzU~0DHv-h{6soK&bunzkO zR)T_{LH4bms9*h*xDCpbP#>|%2D%(79AGUr+5r5*C7fI$xL%KAP)DhvpVN9<_#%gCigl2i{-IRZw%H;J8j|&|nR<3=+>11Y%lP3A-lpHse zt@f2WF*ColPKv>GDiPcjBov^>rT7GfV}Y+pC-(%|k&Swi@Z=FglTJoLHt>GLg||j0 z4v{`lf@y&T`3KDDvqvSmm!lp2;gbYEQ@0*dR@j~XF{tqOcw>lOl4Osr68S7I6lcrn zCZ4J+L{ub|gf`J(@ZK7%qA-28X##pqQm8P(J${PQ{_GbyYOX{vU*4i5LaUPCDE}>I z-utoVoJ^o`=8)e4w=+^n1OaN^i1xRrzm(MQ-V>~zzK+_CATXJ9>%}=sigaKbZ%1Bp zHZ5SaoaYYR(^49*HQfy{hRCy(aJ%mG*Z%t-qi-V|?_LKY#s4 zj=EN3@}50EHB}@&z#lqP+Z2cz!&iqK>_am~J|wS~#UC6>GkH_)=T9B7nym4y6IYJ& z5K$7zA7t9m-JF*%E_}R1er_V7fm7CMNf*5-2BBw+UQg_=W29K7i6vYp&)-8_a=K321jXh0My&+ zTS<5$dpynztTY@s&>^EOY#~Llg&~%ANLZrL+_90#aIofHo7jFP5>3MpnGu*u<9ocd z=Y-ljfd0lH`U+rB)-pnJf$!~`C5fGB{EP#0f>lv@wadzuGV3dy?#kNR-bkKXhxRwd zbWVQD(%@Pz8Zh|z`C|q>k)N1RJQrXQEqE)tm=Kr6n=+=RU{iBij@<<`qBBM^0M!_P0n}vOZv6>a#Wfe;CAQ!+$uX|8Qna|6!~E zrW?97g=hm@-h&_io$~Pk0>YNuTf%>#fcS=k1K>5RL@((>7KVW9xVq~1k>(2?`%-QE zsoMY6ddqTe6OI*^fw8;sQ`NvYz9WbTtG$1!^_%nzaaMcE8h{}5QXNAGu*72`amj@BBSL3YQAEydbosxR;^myCHh}R5IN1Eum#5 z@31Drp9EKvn`_S0dS?(qKx_7hCaCy4ruBk1Ks4h}T~zC(D*tCRe3_ZwMx?bE5hsd6 zOXa>^4yLR8HnyQ1$im5$N8Berw=y%Xu{=|U?-E68w%bQ(qKr##K8Nm|Ptty2g5h6t z;oVS*gxemct&f&|^#Q}RV?o7gc<6^4qjD85;M{NmhDf&>nl@oXoOsMq8~gfuI^>bT zE)aJTz&FwPuz*@OVYwrqOmk?%fXy9P-XC3rVrBL@1t_a-2$HQe#mx$h5#&3_COBA7 ze>!46w}4IW(@%B?nWZRtx5UlzQ>mARy0pn#dQjCkw6TU>x-OQx0EkqQHUxl!n6{?6 z$(XgKLali$yg~efse7GjcYS;mLM)oqrSYZM92Joqj^EPA+1rg1ri@d!UNoU-k{-eQ zUe=iEHmUnO>k`sok%!{tzQl!_D7H-}JA{-Y?I(MQPdazazVfoNn48y31oSoTStY(m zJ&tR57CsQMN!RP1YdP5~GH?IfycGBrM*(-L^Y4yKas{hdc zZE;RIosB53x&p_*S=Xz$elIxB>Ad(7+Ax>hpeHY{Lqo6g^OA-92p5!`!vOMX#-DH@ z!ZGhU-*jQ7$D%HeKPOW}KFG+r$UfUOr@D?(&_%d>FmO!y3r1s%H+aqgLF_v<;h1bR zTRzEbC?F#Uazv+xaLS)F(V7GwCqU ze>A-i@+n{C8)6_WAmRx~zOF4OOF8OXAfFZ1$o`y*GU;3n>Sgc<*9i7GMTCgRWu;pgl9t)NgMM5={7_#<*K{%$z~ z-?FlI+#Rf<-$8;!>sLzmXX7zuX$T7BwCpoZ51cSmf5T~Y1~AgJ9Z^rK=S$F3cQcGh z$I2UMl2N+oZsb~H4)3THG2eAVLcyk*-dYle-wkh2InA@Lw>MlD%)VtMd~pc8eD4bKL^tfDIko-ORdEQo8)cx)vz|X` z)&v0J-s$7-h9rD4Ni@RX zIjyGi3VH-`)X97HjAsp8-48%N$Y@fH%6@n@Z7=r}!D|M3_E_J@K@_?LpYpL3F3Wxw zN~8n51|CR1oxJ`YcfO3H!?#>G9l`nKcz}n@1_8Lpj65cJqlbA?%OzVH3%T?7-vxND zGvUkw4v$k;i0jY)!VTT;!ssutbpmUj)9E&0s%)H;Us*W(*_x)~j@zkN2rD@|)B~=W zB{&kM_i-5&Qc5eu5D6Jfwmi|zh)WEH zKAGqhB(5(rai-R)OqCn|`d6?JoYJ0r7taO^-^ChJ?;tWD{)Rvj2t3gtWIXSzcNL7@ z4+UTta+gGf#pcXvmoNZ@aq~$!8Cvg9feASW_sl*Ph_OG)-Uow;HPLKPX>yIaYL`e* z6g%Wl9m%}uqFU9e69fV|Kazumfah0jlCr2$@K!$Yd^vch^9K*D5ucrp0K5TKO<(?x zvm_>&=L^CI1&fpOg^me$2oKbHH;dYr^#Cs26tK@sPuF5cjY5^xiI6ETeU45EvnlVl zw*ggdiL!zfyrRBJDKc2F3CXX>iqI5Vmn#M5qIlK$@x;Qc6HT55V}(1bAx7ni)SFMc zP!7y`r+;JsVq^cYZt_|ERnj8>z+@(vdzBZPfoP90y;Cz`@5GT?7!#3M#K3CM>I9>01qCC*x<5EP4pyt#=N z4ApdZ<^Uzn4YkovKU1{&Y)$~fAG9-!S4YEn8l^)5*riI#6XQ{dl02Wok;6y{$IT)V z#Fu$TtVDG*7{2dS5lO)+%!(UeOeS1 z{nZxk1M=Tp=L7Y$KzGZ27=c+AX>y<#)o5@lxZWyN#zKIB@!fd*e#0a|Wu311voa&> z%W_Fl46v0%1>u&m!Ne2ub-3&S6agx5J%g6ZKo@zeT3&|c#wER;gvrYpt0hfVtHt=+ zG>T4Rb~TrnR+6M%^9@#mro<~WZ_jCqgD0ShvzU(gE9S?~O+vA#3~fr$WD+>3N(kHT z{LNMKgDn6+cT1r|sw8mV3oqo9_xY7SAbpS)=mcpYNAi0q%mf%!@FE#Rc{1JSk~~mD z(Ey{4(ri|>e0OzsU)$(*Rj~#SuySxAAGWfpt}F0dM#EQ+ZZiBGNw`-bkf;F!KIKk6 zJ3Ll9B3JhMVr(RepUXe+d#y)-*7xFL!bUvnPR7pfGIV6$^5~?n_LFS}u$7mv_GKp6OJpnG`+z1{3@K77^2MF3a=9Zn9ji!I4u35rg!W?wzQj1!W$_-`_Cbvua zPTN24=E3Em_hG3hH;-MI&(3hr6hBsng~j8G%z-Zc^+w^1f0GHQihEg$N%j6Q0J&Gf zvg-b5{!Y!M5F`_AubTD|15c_OSZJL~Ugrt!-X^r{RVmosASgitPvKb#f@V;h{6926 zPzGkn5DY%Nro=b4{^#7E?!#u`ba>DcY7TR92BL@oMk7UuacIjft;>9$R>1CG+d`@p z?u`;|o9L#i6+YM=Ts3JY-$p<`L!_%kmYgr9ZG0Dn;c+a_<_Yz4TI*D=y21IbBq{f9 z-V|*8I%evKjm^x%$jV6(QP#UPA|g*WWd{v@^>~h6Sf|0Q_F!b8yN4==NOYfKo{Ot~ z-7|MU%Sga1?0bj^*AWn&hX?p7%K^v~@8BRxjeN5c_RxDbA03uj`gqAil2qv3+M!7( zN5Em_M_M9_=yTxE`VRe6$bNx5;=S_AA>9CwA!4x*h|9wqzYn^C1x|(7t*jEpDBfdvu{4|79y4+51isjT78ALE!P+J=7Os>fF~7a-fN#a|IlGy@gaAmXV(>XVWVm6lX>Ag5z^OU7G=9vp*oo^}ZiAz}uv zg@BAf>mu}ZF!M--r+{4D*{{*>q`mS>;%wTa)I}$`s+!I^-ySabgYr^1qDN?UA4D}T zcWk1q8c4(dt(+fYqFDgA;2kiKZZ-21s6kTUE)Wse8eY5X#)8;Al7x3{x+*i*9u)OTR4l5=l&4}q%!s@j>0SYhGeJA}uN%TRK1hQ#4aW=b>`3+La zXiB)Xw5#&G_y8>xe^=4ug;`iK-kuov7l@O1miR{vqbVDJ;FDXwJqt;7RGfX3FZk&# zyJ+l&CC5l&4HE+9F^#tuVA7{`TpT>(!R!tT-|*%g858cGdsjERSBXyJ>$TS@|2;}BYgvr;~&KM?%p`uN0Wdv-U7zQAQUd{9AuA}{fo~Hgq7d0WMCE(O(Rs00mG=QbZ=oPs$L8;pz_ko9>VpRc*KUaKNzS^EZZjV>KVyEJD zEgcHihmL8YA>CT=-*F_TBLC{s&U;h^z6f|Tfde*Tvr2(T;&3?8`R6TKFGi_Ne~@`R zE{#ye5XjW6Y{qL4SL`lf7UqL2fWv3J)sD?NFY^K%$P$Mq28&KBJ}eFGfNdNUL{)I{ zO{ONEAXQ?J+(+eh4xxj}JUrkqu)mJDit!iI1)ubE5T&b>igBdrLP$C}xT%q3E)nn; zI_`Bs!oUUJu&asVH1e8Q7$;>xLtEJ82=W0!3m&^AvmNR=Ufer^axhEILL81>Bk5m{ zuRSA|$1Y=wt#6Dq89-&GU?y!tu;_XYne$Ot zjIoNqNrYuHT4%?AJT#{w_2aUF1z3Acz`ezp=0J{{zk8La!J3x*sBNH>ei0{YFAXvo z=cAjwzRqFl#Zc99M=+NbqQOaR2Y;!hkgEGmuTlT>E7>&vN=qRR-gPxr?~XUulh%Nx z=v3x~%3+LS-`Jyk%wt`7Vm}xYuy5h>+GING~vELTlz$V0$S? z4e^8Pz`>wgzY%NquO?{;Gx)g)sOOJ?!g%(hAkkEIVW`&v25ddw-lw4Ob>ei3k0qH! z)a^=`186bf59HQ1iMbR$#V3FwAj!!U(5D>uHWzSok1@7F*5^xzhMT%5ot|OGa7cP= z?>6>mFTnL}fOQ^XdQ2D(SyJJog3;lEggtr`x8r42R4(@}6YCuw`xmrya@MDI1`C#< z!$=CbUse9kxwMrupm#8o06wf+4tCh%!<}Wzsc*Z^fHWR~ZW*X(tX{JF z5gDcb-TF=88-jA)yCdBE68eGotJ;my=3QitPir0EXb?xl8ymHfiCQKGrjpRN`X@2J z!fk{OxP7Y${_t21nkjD%)SxOX=W@kC3gpA79@@@fg~>w^=H?qywO=>b6Qv zO)Omtdi=N3^_E=JDSBS+^eC7F=tXd`<)Dfy~eoPG5uRh8tLrr&%(ZqomC?DOvS(p`KvoM{uT|jhV zrap~iA;`DYGVRES(>&cGG4&+}(pJq0cpKiZSdU$ZU)hKHBN^#YHM(;Y!Fg~7{bk5+ zkd{jGR|2D3P~yv=3NSxh4(a$+lFRm_xSsCg*B~%+A(mpDV31I2+w8!sG#S)Fh!=bw z^PJj8wf_yLDOEJg+QP^}0%Wn;i*R0IgVUcNn?JWp$u|wxA!*_+LbZ6l)DS;%aTM0K z5Pbwjua1OLn|3`E5S3RVyD!RggR5!lHAi#?em-Y>kIRmce;Y5HtASI=9!H%tl0Hb!VXs z@QFBPWq)rSqG>|wu<4<$dNs@3!u*lTzHs`Oc$Qcccet_+(A_E4Oh9*=|8|2v3t5|!<{e7=<|(rhOyOPzBsgZ}HvhFA3A8rWLF4@; z_mn*4dD`#7cgTu=tF48}3HHE&P4{2t{)>btx+&bvAW{Q>5OPVPmPFIQd`o3fEUfuwaT)!j;_Y3* z!=Vgfp)d3mqBtsa@m3l-ah!k)=Wt+)mnjY9td%+=Y!uLm7VS3};8h}Im?!nb)WJUt zc6Fggn=tFNHQw$of1}1}@@l`F`A8AVPKqexQK=f|W;q^&^JC(Vg)tW`Mg?0UxKady zCJlRpmCQp2DA`FV!r9>Lo>JMTNeN-rk1G-=SO5^OgG3Cij?Nh!%;p#>0U+nQhowY> zbHjYJG@G86+84+!q5-mtFp6_zpNaz6MM?YQ%ELx2jaFFVmPC{DQ3(RgVI#UEza-{N znlx1Y9k?)bOw#6E88;MNBTR z9mLdw7i?geaW?`~7#AS#mZ=NSP1hY@)x24}T4}o43X<~ePNQzWgPnm<92`!*;a~M@ zaVC!->0jkAd&JuE146;}W^$NA#J!vuAH0Qt!qP}A4t%`lyWb<8h+*a;Bq6Z!;2*lx z(tHM)vkZ6uY&^oVAyd47ci4#tFX{|P)017m{Y4e-NZ;Fr(Fx}&>jJvOr~m23gv+{m zV>*c>Unl5W0r8TU$6<_V>JdO!P@s3*Z1JvA7_judT)YQrjhM9Unvc>c3Y(l60ti>W zvK->GhXQK|jfxzfv-Zys#ILK3jm}QQEQu0oN$AfQF}p*n+eSOxED++gQl={qgPFtR zR*p_#i=ed1oC#!RO^0D-L&Lv@V)D3&i5WaPPl z%NKE{h6Z%1GVS1aqZ-p3);*t#qrDl0gY-oNFG~Zm#D#?8o;(tb0C#ePFP~-lsI;O) zaB?(!cl?yp1weXhh^N#jbZa+;`hx_IhIMK1HO7HoGS&Eu-s8E19NL&m*XerdVD1p0 z{s<;t!MMdS_Xw5ZUqgF_yGj(!_}8$XDUtzCcMO1L=mhK7QaKWm61;3f-ufwQAcz2@ z_YP6`8WAMp)?ItP)ln6f4nGp^ko1Z2tqc}%XZ*|8BH;|$oc68C!bEtHV-FrZL8eTc zy~}fKIe#pM%U>@lEJVV|K~0P{V@yd6_b>q`HEi>Zc*f4Dx0S6prP)D%U$3HoUb`Gq z8>{`l*wYC^r;7FK37q@|1fI{BOS#<6=eHk)!aAyQvG{|RW^H4f>C5%vK0jqFSDDgx z65A5Mp~ap3%LY29nJPk(d@wV!QrUm}6n-)cs!6PQi_2rU_xR~ZmD$(#ar5JFk=MZ9 zGeo6>&DY@-R-w{I67G}^nGXLkH%fvy!@fY0mM8m@uTD(xT3g+JLyTy&>k;{PP`=9< zU%+0{lFWfFes_)7A8w?TR`hZW4FD;b;CVmuJXvf;ceDU1?#!%`$fKT87?-iL@hy(8#{Qo3t%mA5z=2GsP!h3~*+RNJst# ziB%c@flNR%Bfl-TBZ5r#1_^ZL*GiKUq?cCo1Q_KMx4UTz8;IAY%q`xYz*;yFfrp#x`X&X zErkgXqWpAwvF7YHvWs@$*1owTW?oDCp$pBbb82?XM5W?O1T5caI{?B!<_C3kIHOf- z*m$UPiQA1~qoX1uc3(JZ#Jur%3uk>4-&wo>sNd^MF`1#WD&oTyDikdwDp#I!G{sE4 z135ot9?Ku8%_d$5+X@jq@su*rqC9)gH6t0~V`%>S(gJ@+Khe9;+;gVTIB1hr;UqvQ zTn+B_!Z`)OsJZ4!9Yjy^0aN9L8g%iw{yqK_e!1*KKsJWZ;wO6mH(&AL)PZWwS)&-g z@c@eJi{aROqO~>(8}V`ET%s(WUr~<`hYBv@SGd{bzq(T(JI0%G?*G`87n=KueTi}x zqHYINiwT(8!}DtY|bMVOSTRwA7gwy z4LDols(&oh<(U;m=VAPN>i2I?JZismO73W9H{2ewWqI`uZsGZO5%Jp60q z8_8NFzA!CDo0ugexybQ;%Afv%wwg_nkMk}eHP(^K!>|S`@sDhJkEXXH8pLmB3Ax_4 z>^oZGi%`?#2D?Bx%OCq~_*oo^?@*Uti(Ae4s!LT+T<3Wr@;BSJgLf`G$qbXm1K6b( zgLjrxDv?EI3jEXcXC~lglM>7^wVDP1R&hGIXXE>ghP6&Vg^#mne|lT2Vd7-E_`ST| zZTp;w-GAHnT!l%1VTlQE9j&?uY-}CntGamDHZ}LIEj;rK_eg-Gvc!p#&WFKl3@aYf zrAlyus*4vLfS1E8!K&os|G#OLkceo0()0QDP-^3G$JsMjgc#{zd!UuU zd~6f_>OkueL&<9{SOLhBE7!nJ^hgGbQ#_WcJ%)5SbD@M(6vFmG*i%7g{{z34kuj+5&Bg0&wZSb?&8J-U2m;EwCt>E9ic!|Al zI!wZnw<9A(>k+n#YwUE}ifB4x;&fLp2#dREeq#WsK3rXUNlxlJ^?k@gEhb!@9u-glwMBbWH(jXSfkB%I^ z%6Ylmw!DLgE@;b!W^8d3wr{t*^Jz{5DsSYkRn7b6GwbE<^bb9Bmhv>PV~NQG|VP{&LL9CWLurKqLmtw6zZr?RE*}lRs2eLebgGkKxNsH zk3L30iph*2s~yuZFL95*iTU4oy?zfQ6$Osr>-$vS!RB{dm1Uoylt@k2OHCUSjM>Na zT^;1Qfm3qcZVynbh|5j+#He5;nCSRF$%k$VTYUem+))4$=M*cV%h9Ga^YIK|pj>Sd z-9rXBt3v?MD8i`a4Vr`y8|`Akh*F2OXEOTfTrO6d5E~WArx7K+K5Ne>JNr(a#DEn0 zi7Oxij%@y4h1npVMzGUoJw2bCF627Qm;Ct8;F@nMIVs5g?bwEI!ffD#kycmklaZ(n zC(rfwe*Y~eB3uTni0^Z>;|8-GFK82FL=d9_j>XpEUW}=4CWDtz-`{dEe&06f2oN;` zTVRW^r#)cqPgTm_0o z3Ic(!K&O?4roRGDKS+W>pfTWwIs=^!N}7HHM$ZWT2EjxutB1jeB2I#%pOz{ua@!Qt z7PpTp7dV8clTuv{o<7sTt9>=UusiuhOHI4Mvo0&kb9=~83)l6yhVkr@rI}sJ@JwjC zM4}Y(U1qBkJ?gxwm+5J_x_4kulZ1*%XuCy{GBc}S)+_i(Bgtf@nobs#_p4Mh#V4IV z`7H1JY@-zmNCd4%XLqFJKx&~M_< zRP4|os%e*WU*T@6YAh_|XxoOEERWSVE&c4du+^T4>6sor>x9&6>~4fvZmxW4R}k3} zej^>XMnnE5qQs(0je;}wB@s^m)rO5|LYqtdVgOOq`lk7iF<;0cqb~W+|L=WPpzLz3 z=LLZjuQTe-AdeC9<}%*Ac3#fa!A_nu3dwW6_tEZ|)V^i3?@Ui>?yR5`?>4cSYeDQu zYi_D==Hd-nId+EA%_bngTC-oH|H^js0$CPpDPDGNYG`Qq$u7+7e)ivAb3Ngoi0i|v zUq|;}A`^T+d^!p7zxlO%e{>s}P^sJ}k@8S<-2NVNT19+mUT zi=~<^hNC2k_~O>2^$)r?EfQ2qQiM=@4}Zk<>y{IGvmk?iXTLX25Y9h;28W=&0dK3h z3OPz`Z(6}uP|q@tZ`8dS_-FMxA=hW(uhq{;MAqf~5#o<9^7MB3bxWDA?=`(-2!YA} zL)=?NMbb3uqPV-eySux)``|DP?mj@{?$)@wySoeygS)#A&Y+j~{r0~1?sa~iv)1`h z*_G85DUlgZS60Up`BvZ4_W5k{e1{Hro_!(~-t_xCyn7wJc)7oN+6HfTsqblj?S5T7 z+${YPApYp->3ZGY9~}8?dwXRdD!}ljpU(T+ z(_+#7qOf63P8Z*+6({}QTrFZSPfgB_aXiGyt}f5NY;`xlyNRixm^4))qa1_Ht{%Q` z*}ZK&vblk2$VOKV+P&RB0f48Gv-uHWBCx=Hpti?XEp2cX&ySfVn4eFZ$40`NH6L%! ze`+gVVc@H}dpnUo{z$(K1JLU;^dw-fgYt}yYMmb>s&h^j(Hp%@wUsx{#@f91v>led z3Wv7#=&f>%I(!}sTkL$HeLI@p26Vr6y}WV_pVLC+T>HEGf`xXCzQh}U)Pd+h6dXc$SKXwa9%pG(PZ`Pxg^!M zcA~IH{=OT`kxujU-{QzR?5lWxk$*&vt^8XF;B>ZXEdRUWxH)O|r;JgoyD#4vK3DEn zdq{lj%JCVU#%hff4MSiwet~{|QA{f;-K1`*3Vj8*HjQ7sw-9D4-QAP239B5QF{^Y7 zv@b8H`1y6V|Iq8WNYt*aD!RL~6qpI+G$$-&5Z)TmRR(-&^bkDcezlZNArQv05$_qG zd^n-{`A=7Is1Vf@4hHWtM03Z1g&*_Ub-zN!C{K3_JpXzwQOqMY{MjsRiTjiLfewXT z3=`DC(LBg84=gmu%?OSAp_mjg8K~32!6cl+DNe-(Z+be{_U5_7kUq)~UM#66#JrV)Q^XQ7%GXaU z098F=hF)s(H=ETcOhSrcP@7B@H9`PF_8L-e-uDLp#1LbwQqHabqLjG`IOA7avZ>7N?}+2 z=+9vflVuu8575je%f3G!e+Pk2$R1CyK@m6y z%f@waD$GMWWKixtwD3$nYPqatzmu;G*F;@2E!Va>C{0iAt@X#1mVN`xt6e&iez@dz z2+lbq*dl`E8kI^@_J>ccdr!0c9*mZA^rf&^Q4d)=I!e!dEqV%PQn zZZ1BR(jMGR6=I-wX3x(ju-AdiHOwt|^$+)lr{|ZaU#L3&mIT`=2-2x*lx>i^X^SZJ zesu8oX!SPb{?Z?;L+rm&Q(IGOWXlZj=9Lw)Wvo_r3s2bK+d)Scs|UEL--#=*)qF~0 z9G#6cPJM1fUgDsRirelkXJ%GbOD8JmbqERbcWxNI+YNYyLk`vXJz6(PGJVkbWjPWS zxRP4@XotzbZqp`lfbA81Zr+YEstFR`)>q!TXbC)}j(LN3tauo%EE3As$)Tn^CMFwX zBq{hdKT+LhK>Ksw5eA^vDAd!_!{h7ZWN-?BNS*xxqD`o84p(->o z%FT8NSM*(gM<%TSvUT(X|G*QJ+DQ30|9%SJA=iQUJ##!kRtM|%}rAbk{>3R#)Y8eg0l`)&xp>MW7imOhc{p39HC-l zcT9TvLiI-}?q!@e6Xkeoqj6=gAE8Bj`(f(w_F?0D)>ed@DRvUCqPfyfdn-DrNQDqh zhoI!y>WorEfeb)|Zpi!)T8CyqBz)ygsj^MXCP#QN-m#;S!-Zc6=ybI7Hv}$jN77d*B`WRkFH(<@3 zO+FV*CR~R(@A%C05UV(&u2z0m(D!Q?@yJl)8o2Pt)wJ z<4(ImT(fq-EDH9i`0Pve*$6uiskwy>d%L#`bGti)#EV9En@Ks9ih{jfykU~+WaOk4 z1$|vye0nr*!!8e7GVgykCWe-=c~h$jqc;bfSW#Nj&1xIO1VjhVi0Ac4G(FI`&&3{w z$^bS5eHrbyY}uUFu}OFm@fm6e!&O@-X)O}XNW3&T^uoRw>hav@%`4WoKuZ|s0HcH)d9p-=A*wc#Rz{B_`H{l2LDHn_#HT~D((k>64Fyj{!Vqm@ zx~I*xsk_tS(^^t~V$wB|Qr`mP6%JT#TdNNmYg_KQ^qP}{cpW2>rD3vpRnRYUnSLa_ zUGmlcnLpIJ{p+nQtht3O&znx3jsf^K7FK~%P`c}v6Aasm;WeJRF>gLG@v8<%x&!!p z*K!w)%)E?j&nkUTJ99~%Gb{P1$p4^Iy}m8WE*7lbnB$>RCt&|J#t>(DSq}26WZ5~^ zbZ|Z?Dk`)3fW72d`fW;Lh>xx*>ABR}@xn*lk(-v`z>%cWzp0Z!73P}ocM-s-6p0(P zg%XED)L3?o19dt4xhG#A@qA&CYL6+zf8${>aiJVb6@TD05t~z*l=FzmsH20gu0+e~ zN`5(6zxV5%jR{sW1wzFbPy^cnW=+^It5l;tznhs~lkWGHzCzQ33R`jY*&dR(({vbq z)qi)feiS7*DD?0#-mCBES#g}ON zuRvV9>zs|15V^QM57Hpgkcm*HM zf&EFuOQ3q#J-ZAwq#6UnUYy~Du}{*p<^yF*;+_0j#`4X6hOkZ_suPhDG2P+?rADc; z@I&Zf6zM0`IHv!7cqAKbtbL)CpIy5n1xQhp#whFmRcDkgT3XKB?*SRd7P)uc@FqO! z_gzfNW|9}*+bZ*WT~_dSb5(^~D9_6w+>FHl!BKvAc$imT#a;%Oc^$ZZT+e4cA3xxe z^Im5pIN4}-R2j_UP<=R_8DS4|bhc@IF(-%9tA__!S9WHzp3o(k`w% zkI;~~ly(}N3^*Xs=eN`df2z2w9^%P7z1GvQhe3?7#g|0L!X?HAQP>1! z4OYn4GzoZ~WkdBh@LmpM>^|o;#?pGcw)ox2Q4}heMs>d5wPUnrTBAceBR<2re>jzj zS_mcn>MT{fES%HTvqiK&O4K_&wl6}qPLm~W9&O=^H+KoxulYUqYlU~X8Tyaaa%Qi6 z++W$>`a3yyBjCR~9*!)3PAYqzS$A3khoABZmzSw)gV6rGQ2|G!@vt47awmhSS%ww1 zn2(v53Kc#Eua5PY&c-gHsP}e4$L^GLX3Qi^1+OW*b2f4=?z_B3a*VFXsFRMf8E(67 zK$`wN0SNr`*P@<*m)jATAvp1({*M?K#3cip*Tl!BeYjv&2zB)G%wVrkR<=XS^31U& z9xE2al#dHK^(l%#q=gdE&4}7p$cQHUe!KHxTEa{YE6t}CuQ79CMxvU1EdguC$?&q9 z@MmV1>f8;MGP#>=;w&VMterCFQa$nK@-0PeM6cdx-_Jz#f3_+X<1v_jON^*7dGr&sFE92gpX4**FL zKE5jsA;*6EIz}#t_0`dLWdOrKDN#MsFX2ll3P1qI%2khE&Ye;H#| zx=y*KW0zLpDb>H)QNUu0>%U^m1Sr252xq%Xs!5j}K!q{Oa3?klM6hW#>G$*bI>8s%@bjs$a2s7yF!->eQ@=!0fCq`)u9|Yh ztTeD;S2UCCIJ=Do99ZY;rmz$?v%eSX{$7rzbRSFQm$PK12ljdwfZ2ruzJ`=S@F*zHP)d z#!(fB%JiiZ)sahkFwNuysr!39kWfOdTACK6%Ut8NWRT*Lk;h&G6h>EAZMLAfO{|yi z$Og$_SGj8=PVxAS4>wqAKy)qa<5lad>_knFdHmQfo7Vv#rM9i~TS9VIASOY{x(9Z3 zb?HgJFzb@6s?TrtkL|9#g>wjICX~O&%rs*o*&-N*2&QW_lQj^QLdxp<%LZZMX*>!L z!R!Zm@W#;%jUs{raKi=|SN1ncwpIVWJ-_+P5RywB-A}ZfSK!aHbC_jDrDt^nYe8_K zCFqUdq0}r~2&iEc^lXOssev<916eAXG~|A9Fd^9Hhs97jFx`FRbKYWr+&WqCo?w|u zsMGuB=U;&0NQ3+qD#aI*MYaw;8~|ko@nxK_?u9;BT#1GSPA zM@62nNX{CHFj`opHRRBht`~er z1e&%j`!E=rid)f`QYdAW-oAY-B2%eUMM=z)c`VAN?A^yLtFKYVe zJQmYsGUX}&ERgBJaPe;CNR^Eg2&3e8?#N;v)}XL%B@()lV_lf=7)xrsHfcm7EdAl? zSjBrrA;)V&B5Xa@#=%l|s~n=Tr5yp?Rc35w;a*+{BE zb83F(Wn7dgl)upDRP4NzU22`I%Z1E~)Eu`g-v;WL&r?eJ|QrM*>Xk9YY{-iIX2&STK35M_TFcUaf`0&g} zu>ZXsDqOzzkwV9MG+`idzMm4_e{ul5u>)8#kyMhE;J2}guj(t7qBsxsYjGe3T|>~X z|LO#-LDje_V3;+ewEN*(;Q$WR0S2|(C{5QH!08(ncW1q3O1Imzvlj-Re#N-ToJH%; z)5ED6(qaTNV~vJ~o7}lfc=9_4zKPOMQ|5DAq}4mmVm01|*!ITf5{>>mlW^K>C}@Go z=7)jdrVV8PCja4HVcdqywfh*Thg52Uj&*#DmW!0w zUtTzGJkr;oGD~32>k3T+zJXN`Ba29hU#`yuKD=4J`;rLW--%CELIX>kB8ZT1y31<{A3{BHWgH&>9mKvIGnK~flwDy*a2)62v2r(q+i0{o95KuqX zx$F`N**`G83>ZL(BKD77P~Cfux)`m(C9AdjiOQ(Hq$M$z?;viGH0*JgqG@?y5u z$@yamR=5f%m3F8bkjX&Pyc&p-DZbq0bm}$b?xSmVr2lOYB6Tqn`bEQPZ2RrRbAL#{ zBYwKv>xzUwJojk3eTtb0Wz{Wmygw*09iSqi*W{Gv<-BLOR1W5#OTcx1`W8=@3u3GcHkk?JQ`ADlhMoO@{lFN0U#Ucw6u}R%-~`{)BEX)^v6&=$_H^VE zY|Xa|yy5nARNtT^Fj=KEltcNN@r^PKt7t-lDrK49WLw|ysW4ezQ7t&8kFng|Wq3-# z16jHAnI3c3hddTFvj~mpAiNTAlnxVEa2vL)DZS}ZdUk>pkT6Ya2o;&TamkFxz@+-H z`&srT;PC}42`WQ>h5{hjleFb5+=|d5@;!4ANk9hQ>it2K9GhVQQ|a2uITNHK~}B7y*KlY11#TrzuP2I41W= z2%J;Va$*AT$nOI~U~>fVPJf1A`XAhr>D(r2M(;G`mfgQXwXv%&pw@Fdrkp8+6h$`? zWnvq5ksvRW^2}|&CXyALf`CzNPT3KRc98ba7#rqBu{}f*W*Gn_zxD5p>t>mkEo5in zjfydf94oBqq5_U-!)x1am=6|&VpID&OcbhJa`wu;+i>RSR`$2vai7KJZSo=A-)1kI z;{Bb(t_N+KV3u>|zLUJfk=bnGjQ}sLUAX;;R5Q#BnHDW8FOtad?#o9@eKThb4I(?? zwnUmA$B6>@lhDncIwXj#u_j(3jE6SE8Dp_m5D?a?^_D;5k+qo`~;w$T6K_e?mW zVq>mq<`?mnF$!94rErYVdQ(RI7rMaQ!nqm*zrCBUUV)IJ=T6Uu?6Aq0x80nmebA4X zp(WaWL=>+BoWrtVh&ra|g!e4e7|tP*4+N|L8F%yelZbwbJ%!R1eS zHY_z1a88s^OLZY!q|;bMPQ|vQVLqy_M91OMS^VPQJmV%Zwc>|D`oyW_{7+tB?J?L+ zQU?Gm-=%<&Jy0Y@Mu|bxxD3bZ)1(7&D^CWgeN;?O3T&j#4edZaQeN^iHsOOG$MWzw~e z2WAVlEK}RzC-f@!hm|;Rs1&sX*=8~#grqu79!5p{aKnX zX>!H62;5~}QfPeHmg~VtDZrs7;wB2ElEKg0lrSZyIlBCrwc6)!wBJDyj;v#D17eC(E@9mGeK ze4)n0Lxjfu@ZTx8#`s8xiC@CBlBWvNPu5Eo{(^#-4^at0@GGJFQXlR_rc(LS``34* zz^9qT%_oI_XPl)u*RKMh5Xnb9N^GLU^G}!(i&P`cN7zta*EOj-hs4P8FNXnGmuBLX z9tz_hqqGmFMeXsQ zL)szub=u}S4+cS9a1gz&OF=K>gqfB;SRVQwXRO^|tq_IK%#K{guR7xnuOu~gikb;A zEIFVRcsF0fL<}l^?lu;#25AIntk$Af#)b%!bIxJpnUat7Tz3;iPRWA4gd=4BBTlb?PlLI3=)6QW9*%RpZbNfO*hx)WE7eChVC`3> zr>92pWPlhI&r3wT0;IV;G{K;Qb@9NUFP>D1M0)@XL_$!Y9b5~Xs2i*BGifxf7nTkv zso)={_Le4^5CLMqZ62(DxS^3#&Vaml;2w;eZh%@gX{E3`+*kK2J7A{KThV(k3P`(g^*H zuKXkHC+_hNqE}r5$z8sZFv3PeTqdG@W=;XNG!o9JfJTc!e`C%0Sy}>D*Bx4(MDYHH z`*vB<{W^a1s|EfHXngbX-z(5l7X6`{1HOc{bMmn&aWh`Xj$HAef9xkZ4Ly;$=Z~CP z%Z8X#9?%j2hzX$mDH$Kypk_F3DKwy?F^kNhPN6%)1ja+WCJ$RpamBc^Il$vXhp2S%VU$z=RRQiif(PEjnSupEuURTUREW#| z>H@?qR;r=%$f5nYMDjQZdwc8w4LaW*x!JBk^xMT*r58@AfX1xxU|W(UN4#)j()Ky~ zc`g8YYf{s&7g%E01VeJbH%u9sa^_*5k36nWyZIhTj$iOZbcFW!m}8<9SZFIpxSHSr z`1%KcvI!_`_NK0ccnwze1|6g(Qqsic7USmmbC6MSxwZ4W*>xok29K+_)GOa9SHj0A z9DFm|j1pavgQiw;I255h#2<$lR6nYSoq4L_QM97555s{PdP6pIrs&wzj+A&U@p)$W z9}HEf2*yjHZC>S4zn7GEaIf4m2|DxxjJ@pvYFChij5LYk&e%G<5Am5A;qi5dl%?j2 ztGLp7G9%i2Xx4c@@Z`yjG2`bfeq@?9Q%wD~LAS{}ld2Q&n1f-7R8x?jp0Bs7o2IdY zTjHjm|3MuCvI@6aoElxQL&l#p6SVuzi%F6(TcMfKNP-;hYkD-oYv~CVpZv{zZ3pWR zkk=AIAC2gQL;uTrA9wUFGaP~*PK{2=c@M7lAbQmY>su|@POOJn6k2}@m>M#nh@&-- zpkkVc#TzyB>_8;(iLU?AzYy~~O+W0)DV#OX5o#$ZSdX~%J?S+i2bbAQ14ahl*Vr?s{(uJwoZQ#WBFD_Ed7;o&5cJM zsqDC$+K#7czBim!sinr(@Am3QmZj!340Ziqe(yV@5dMsCeSgbgbS*$r+VH+917MOq zd@zHdvGG)g&=F@GHK%L&pn>QxDKJPW2M`zpohybiNMe^OM3R)%1ZU6nt_^OYlv@<{bHOj07|fXX!vB_<>d04BnK%+6{kH zRMR0)2$(?Wg>2zXDy()@y95ng6YZ@_C zdg1K)U3;HL(tKK6vf$#gq)m{eYQ;vqdUbohHGzeq+D4FrluNcu@bs;s-`q+VHl2Y4 zf?pKWKchxv)Q+f=eOCrR=H2L(dqz)nwoZ{_p+P>}UPxN20>D!cRdtgiyuriOO|@qb z5&kBpgV5_Uf?O$Um!N1zJPXwvxe1u6J1Tb-vueUhyLKJ>{k5)a+TLw&nxYbtTlEA`Sh%Aelz?(LI zJ!l!s!voM_Cy4uYA_!J0`_U{k$w<`=?qaO@>flWBtEb$nbax*XJ{ zECT~#8{e3wZH3F{r$9;7ZJ0arx3)|s3!XBH^8>p8!6dyu5laEJr9J*^`5dM)kXtVh zSCbN}hykJYm$#R=Wso7(_M!s+pi<|z_-iCth}l0P$PZ)*2g!+g$p(7QWQ}m5*y-sn z12T090&Ou+xIz(#HX?)Qj1(=yqUL_yW8-ahzufOg&J;_McM-kTm3%bft~@;DjW&@( z%TNFZKp2&654Jfa_O+f9)A2~F6V*byl5Whs?hv>XNPmIIK1yEw#z~=La3QJ~H@4sU zq?k~Sb+j&jZV-!Fr_?nYQ^UEdAS4!HmCGq_G`;aUx{KQPr<)Hye|gvG%dj%=pw?gL z^miY5wC1g(sN57{iy(oK@TxOD478_aU4a2&=mL-H^!)9pix(ZF9E|&Dks!5YGLC-{ zv_ZvthaohJ*c|a8I2Wpd_$y9LfKDfAzUFzmHPciSs1KoQ^L2W`WcFq23k5?|&cwL% z(RuqYP?6LzR%~+6h*OUFTCpN*Wj3^?gSavt{3fW%Q=sPs<;TPQLe>p4Nu;am*N$VGwG{Rx(8=NYxCTdVo*=LyP4p*qB>U8p>C zj5WoNdjjM6sYGmz3e|U--NWWV<_H^W6yZ%qFSCnHUumf-;#c1Q!&rhf6cm(*iHbiv zu&)5&wH0%QAA--GJ*U#6F}lZDr36T(*KPV^7;D&Vm&>AHqHxG2;M#xG!QU1UFqDEu zx|ct65d1D4f!1)b`|yY%(jYc15iX5QNljk6bc<)^y*r)!+CBF;iAOcic4AuI0Ol;i zI93vJ3_>>~vxBa6V7UaO4DxI>Ce)-qMa?%+5S+lTf(iWMM8V}rMRM^(!X1V1y0QW~u}N0; zo0p5a^8sY#-yFCG*;y8S-2#o==d*3F6oSDqD#?VCQJ6ys%c>|3F*du3pYYRB6vvx^ z=i*~wVF>=Ehxk2vcP#z-y54}q{jKNKp|+_!JDayuC4%iuol}l5FDfQ^DN)fEF2hNE zGrkn?$!~`uj)sOEtXJD*>IJA7XFmhk{SSP~fkG22vTC+1KaIg_m$ecNJeXgnC=gJX z5cK-b3&>PLsA`!t`z8gyHmH&SF?rir>ozQBqDAN$lJ+(tRgs2hkSGSYKAv**{aWe{ zmw7Zk_l$5e*kFqD$3&}0XJJBa>O-t3WHcnP|A>cmK{`RCo9IcwKJ?-1lhrLVxl+jJJIEK z!9$Y^!TABj~ zOOEGaNI^tx{mT20<*CO{E1y}%BMqtof4&2`gy9xZ+=O!ZWtPAk8LsK5#ug*{<|G-{X1i z*E4Hw8`BB|d;$YBAz=|oB)HJWOy)*Os1h5~w%G6buMN%sUfkO?Tqj(94ilY{bIO^Z zQEd<{8WOg_VDFtFc|hfiZqt)z-@$;uPD76q|8qTxmRO|(jk*;+uQm3VI)206?2bYP zRiS7~<3d+2a1R1itLEvM-{#5-?4u_o{NL8|D$D52ady3-LKxk4SXh_0u8Y*`zw;fI zBe{0dg)q(ota#G=k`c94ACW*502S{5umb~S$d>C?uex4ohB&oc{D3UIZ9gRXYx{&GfV z`?&uE|DRs-|FRQ+?}Xq4|F9AO985n*~mQIJ7F7;dwCxe_GT zv)vmHhUj7cJOp7MY0VjPr?fWHm(dKcC3NpEd$?2)HH5|G0BK+Joo*9A^GJpDuX=TB)@Pboac}PH^WEbql^f z?{3x-GjHkpKD+upe7qk%SUsMyEed3RCkF7rkCisQsCNiVkapgydpExIdV2f*odIYg z`+U3rCtkI+mmRi!bu4af?#CWFbAiG=+JMt@k81#P@5kj}=B2rEu2DDOr`P+$dEBS3 z_x0KQpQjwdZh-Im)qJl~Z|9qrS0}*mtIa?oVSvw*ri^g#{UVSX@VR^V5C>e&tOfjS zg7ug?J-RtO{|+YX@bPr}V(s!U@#U||w4Gyr_3`XuI!8nONZG&FyN?)V}nL(FOCnx7Yh=>-oeKbM3aik?%$q;K|8roB7)B_2R4**&&y4 zd$*FgWa{w~@VyIoMyV^z1&|7W7`$bWBBT zX9Z8mZe$fr$!=vOPswg}@x7beowKbiDrb`9IzL^mPo2A4{pG*@e7IW-o2p&DPKEr2 z<$d?Ee>770srzw#+1v9%mNi|vdq0$&^E{t)h+o*uQ`~Jh0{MT&9?+)3|3-`nQX%}v0KogX-3{}Zs)Io zK;oql_aq{pPxmCLA$*T;oe(5d`a4SdfT_c<)^$5aKOyBOWgsHA^2DcY>%!xl&*#GC zSW?%)RqnJ$VD2zwZ+Cq~FJ=o6pq32WOFI0O*~`)G>|yb+oYZ&3FKhDG0_jZk`_Hc( zKiz)Pj>_BfU0r-*H z#H%~F`e-q%_j<554rcpU9sYX!y48#G_XX0-+PhUJn642YzhNU&GksV9U|@Vs(c^6w zd5mx=m^quUw%ULX!L{*q!z8Ty@*vTB-O+O>>q#65I32rOC4V_?lGpXp(z*iLx~Uiz zF#ZyIz(2*R?S5{O_mUnnCnN(Nmz&7kO#d3t#Wz`V8L&U}@=r^biro)ces>vi*6D22 zXoce=gO?8q5Gsv31lZdN86mb%%}HwRCIWyTlr{zwDP-;1njk} zY-b(r7dJHsYp`B1jR6nj>6z2DA4lx)e^o!uo8;ZvuA}ewm`XmhJiwZoTo!Gd!F;_h zB82*SG;0-vXysKI30PXou{ImIa_%#&l<<_@@WdIdb=aBFeqIN-M-7UYyxMu>UZyzs zNUJ_UZ)abhzKTr+vw1lmf1FN4y>1KWw|!KuUiXaO53UMe1Mc$f#t=ulq<{S^$v};O zgKZ{7LKRe^kuEZq=x}lt?{HH4I`&YvzYw>UIonsliJ!MBf6 z?-6`5zs<3??E;p6O3d^{;GS?g+CkM@7EO_ywYPHxl^q|g;SJ@*xBIr2{Sb_Dx(8+o zl9>{`m#B+ML>Dd_--aukk6y*skd<3V7(>DDE&UMOz5u!vg*#%5>>-`1!`;;UzCnM<$<_E{}ZoMefhvxMSgTOtBvs1}!{Vxt=| z`*?e(r@w9xPk-@#g+1tSG8MNB^IVQm|MJ6}ZGoy;FT7Or^^jYu63j-s?o^*UI_kt- z2tC1VLI+#~83wtZ`Tp*#(1att-_Ucr5uK^lqyWqhELWrJgu;DkabS_dw%u20sKsNqK21bZ^8W}hK z)t^HKd)q%&M?0hI>F4+_{+y8KC`(L^fs8TcCv;1uRogmu^-AV;W8TS}w%>vbpWuR< zfq$^T)iH=)1XP;4gcHpU(5T->Lm`S1K*@piuVA#mO$2Zxpu;N|EH#uww0OdVf4I|$ zC*o*R?5G*RpA%%5Ns-hv{{;Cs3|1sbCUCM}`M}=@;Q0SYAd~){596|l)(4Yf`YP@B zJZXT+0UC=ltjwb8NW2UeN{~=p|IhSh1fEq8a}DtBU#>Q^sE}F`UHb5=*I7 z(yD_ESKTpM7QWet!81S$EbvWKZ8D&@jOfT{vC>NdBCQNLJTTxdI1x}D8JwINAsi=+ z37it zv_6~^Q*o&{SpI0S@qt==#c3>Qyctke++T_b2BjA=V6=D|qn!apf(agM$U&6Extv|{ z>y*Ff|GkjqtvaQ!odgo!|rg9Z|mFVTNX`R{L_zEn%%j0;HM zLel&svLY-LmjL3T#(fQ)YoGm6flX}qvolJ2bT|$)8SrWX_UN~-T|ZX`AsLQbYb8YG zse6I3*ya`HMfv(opp#pvL|xOBIjqHUwp2eP1VXOdzU< zrb69G&8-y#8L(!6F8C`=w1HswZoc}@*qHurjE$7m)h}gk@{G(~(0nPF%rBM<_|MSr zMe1V(BY;T%f7%W=43hds6dvsB8p@5!e~(?lM0of=ibrKdBB(`8UqY3ABOrW74ZxMz zJN}yLrtxII0!F_}{L@5NBPBFp=>+*!af*NBUHMi2lijEMH%l%5Z`LF5KiL$qf3w;N z|G7Cunf$8+Os#*?6n%1$#g16g1WOVLa&q7e8aN~H4;nZI^}P({zRCd`i5)@J2P%K4 zlsOO=<)10w-WUFlQ8Rz_=gYKdQqjNW_m==XKvJ7xESy}536&feo)A@22iHGJX?lP* zD~3gAM(NBum;W&O-53A`H2;XmO7W`ck4aZ%hnC)&*5CdOT}7)CmgjELZDvWaq**nr z(_4RJmOZ+b_&{T=v(()>J6=^=81To7^l&p*exKp)?{P-ITd2*KM|DkrKKDAF@xk0O z;74JJ3-QiYzCkqj-zTa>jdHyNE z0&+Z4yJ$T-V{vmmbGSGjTuwe9`u1f6y203B^Yo`mvAJT}ur4`N{nepvXfYQY$7`tu zm10WO$^kJ^oaXcU{c(X^H`3Pw@lzf50#Ns3KnVUP`^j+~wE45t1!ukRa1Pds@kKVS zAO26*lk<9P%jd8Q-U8*Zt&-iahA_Dvdhh0o>x>+h*HN3TJG}$vf53xM`3pQ`WysN` zfc@a$w7_W$aP0pTJ$QEi3q4@}2YU2lfYXte{|7iIqV>_Fn9BbJ4oZ`Q#D9SU_2Vxv zlA{5*g9%Ovyut*>{wIN=j??%TkLP~%pBdGgSxUI4gWiPqA(%r~;j|-s+54A){EJ`y znBcS~u9At-ZKelmtj^{C4W@KbOql-#rsn?}25aFvCH!fc4OB-0-vkho0XG2>3dFL@ z1Ocs&@*o>k+Z;{0%H9OIcm>OSQ9tjs9ruU?!Ktri9r(U-8%GiG zkAALHrOf5!G`5udbP0ZZqPF*X@FN)n?iPa^x!-+befy53gPZy1ses)vIaY|CST9=`H zT~iDsx#p^=R;8n3-ooI4XN0bWMCC8mS0M~nv+SdLMDHb%8->S9qkH}Y+odOj+k8@C z;Y{pge>i5RI&j00cu4FG0qV0>or|cO?cY>qX91nHBswBbhY&6&JuSxgn@Fe##p{}Z zi(g>Jl5hV6_qcHB+27WoPNt*h(E!nSu2g6ovr=8cPi@gr+O6-?V<$fud(mBWM)107Or+rKhuHeuuKHvsfX;;{PEvL+76YUWq84 zpI2c*XQBjXRa+SUNoG(8*P1c!kVcc*&rbOFW2{;)o zh?w{8mxN(v&kKE76z{<|0{<7#tk1NuFK5deBf5^ba)Eb2(?eV2r^J=Jrga7L^k zv|L4pcnrz^9QsU~W|g6?kiwH`HCakrsCGliUZ}p8$Y!AloO{*5>tis4v_mXR%qMkVbH;^dqtghXbf!&n<_+GgfPDzsT*qGhDb z5+PbtGl-&PrbKDcNXx`DrKV<@{kiVpe81=W{GQ+Q$MgFA_q<+Av)=dT{(P>_`+C3M z*VS}7bp3+bR`;ljC3;m>uNJ=t)~y&2s81dHU_k)7J}@U2Ybo-lm61 zCS1|-Pj&8o{QKbg?)^hWbEOmX$4@83dXKo5Y+Qs=%gGxTYS15QYuKZ_`IrAga`>BC z0+0R&wcIM3uxv%fkK`~>&9gIpB!_+7zp0bMrDMPXEP)pM~0~V&kTVPYUt9Z3pHjeLes=9PxH68)JN3W>ofbzCD+O~i!-CjhCR%Vj!auX zPp7Y#pkX(jO+Pe2HYJ?H)V`Z$eCuK$w|w`#&AS5KeW>)`gS)r2`y9{1}W zz2y36;g6ZN*_g>3`1tNPM{DU|r}sS4bq>B+`+=o*N^!dX)b3|3O{W&nGo19S(q!Yr z)B3I3Gvk<*^knIT4am{}^QXg45*{wG4wBzgwBYt7o~BL~ zS$tIO*;J2mbo;vfD%T!w1{ceEsXP z%Re6e)HO#?bpyKQ_U>l$MZZlwd+4uMbnbZIclqNrCexL_X<&>E@2FK^R(#|K{Qj!? zbNv>$;cV0m%z5})pO3pe}}^GoTSvw-r)YG`OL939E1o41gD z_LA$%H;YGuHqM__f^yDnR-eoly~L}wUHW||{UXXU(}8C$R};psmzGs#fHZHl*`+W& zsU82u%yPcrjO5e(r)HxgAj0&bw29p1J^1V&ml*o^jqN!(8|iL|(tiz7@6H zu5x$x<^DI>r2ltSA>k48=%rd3bCKt7vhz8=Z{|5YFV~Pw6)(-q_s4ZBTbjl#q%+<1 z%F`sL)bicuf5b}Bi1S{4-(mdA8>zuR_YLwtvvE@1^mNWzjmY`f)i^dw`h}AII?6a? z0BrZoADw*Y6SxjW1BT@eFT~cR1HE*e`~k<%6P8i+h7XY%T`?x~sq9hZj=xxTM>nop zH2;j{cN>iu%M<9$^o_Sio*0^(J?AAp=RA@0+5Zl`pD9WHlRR2M`12!ESQu{-2B@8HQRYbqrt$Q>-{3X-U< zAeQbPB1CRr?&r;7<;w{g9~SF0r+>nWWX6eb4W(hn+7aP_7sm8%+3Ku0-gWhka=aPA ziB*I%_`2p^h^p{+3YFM=QD{4Gq>Xa>L&M-ag`u0Hckf58LGPEi(#6XMo5)vVio%s& z8Wb!+$I*1LAlJ?9fv3hb@y?CkU*GR|H;!5(LA*!IO}>85KYUW0tv98Zx^HJhkb6k2 z{jKz1xm?$*=FW#t&B2=ct?Kr>kd4#EUlPCCD1N1?y2BM9NT|lWiszlJj0yhH-30n6 zCqst)UYWBg`=Ue2Z(DL(!uuOpc>7tmE1Y6WPTJSsH#)Mo{k@~K<#o9ZcdrArgkKoU zmLcL#C6fhuf<)KEz8EpLPx)GiO()jwwNEbS(2cmoT_|mEbQ$AxT{wF=Vc-m5#`&y2 z7L+36MJ494y@9kLMLC^=BT!Tn@t>0V6TP}5>U6!!2Gk48@Q#Q_ZB_#-iIklRt}T)0$Zs84d`li8o0#V>Lf*&ll|_fprunzYNj`B+ z$Qvu0O=X)G-nq75Nr%S05X!*FC;dw4!j}D>)sM`0iqANhvZ^_o*t8v|^^mHYCcoA=PKnn73=2VShvjV{madJNctQ&Rt&G zmwCe_zJ*jd)Az!aZ@esa@|v89q+;*I%2^zuVoL{LEn6VU5=V4Me;h_qulDqc%5L+LHjW%_AiH zhQRpbvF4J@?NdKn+FnkN2njK$F@AI{&1TxYbLjy{D`UmF?txfEQf}mhfCqgp9O1m- zmZxPII%bA%cEv-HO>fjS?6R{ER8;lB)Y4l>1_?yLbFyFxh`9BY2&2e?2{Cg{6)HH z_FDr|j{VwMft6|2P2U7QE#fQ^AV4% zh>D)@<*zx@bV>HQ#OT|rnL7(bvAhZ&?GcM9moUncGR|ow=0A(Vzx`r< z+7$}(-{C)Y+&KCf{Yk&k6ZJKwBU{O5R?dpzicJR|C*L;7nV-~Glk@8KF50%{y?n_;&NHEmhkWgmn{cTv^oC z6uM}MLH+4Q)@0lq_x(qcv!|Tju;O6y`-iFV2NGhWyMGC;N+NjuX3}BqAxvFmr9uvM zSZp;lss3%Te~fm^o9t-&peYpxoe#!MiH<&6I>&TZPNMT7!-4z>&4;7Xr(5uz`ZZk4 z?zUGf&tE?tXa2FdCB*BuYY~e)GL$C2ZOyrSZ{{ECD`w;Osd8rKWxkEABOGrUd?KCR zGiUL{s}mxg|GGZ;+Xwrx^(Je!dz;iw-c&f1Fl*h;J7)%%y;JVq4e4mMsL(GoJ~Xt> zdMHOrHJ43^xX33LKR-)MezvJB&UbI-%*6$T@nH$6i4OSW zcKrA~^P{Y|mdwfeTYu}`Sh&yj9Cdd6yGt+D{5JJMLZ@6>+v?G{W6&jkL(B9#yt3TV zXLqH6&&0|aMB0*wC?)O;mP{%mGZl^SUm;dWMnf2^F)UZ!&F4~w_*^BQ;iTf}RCHA( zVsUtB4Qs3h@sM8`bV4?=q*57&7?m8p5Thh(x)x4UY&F)+(`3$f1c+h)MyTQ^Ts|R4U}=h*ZKG zRE`Qm7&KAUAifSyV2+K{aEOdiMO&^)EGZ@9sj@0EQ>8?NgYZ(3O3HI*sYIoCnnIDw zk|yG*LiB57p<`rZNQ_SvNg%Q zronxcL&MnZLzG+N>w_|~Z%Q=cXRp8>nmqA$`N$w^inE(3ZA3@q;Jw31*;6wrrRN)V z%|zq}o@;#eu}yfn$Hb8kYpW-d=O>2e44q@y^atKSZbVl$Z`;>%6W4RfNz!1V>Ptd` zsx=ihc{LxNulOVu9uKRel}()aD-H2~)+evx?wur;n;i)EoU&7>wP)j@=o1m#YkP)T zlXZHwY;H>R|Mf~P!NmSoyUKp@pBYEWOp3}AkAF?F$atw&vCL!IhrjBs=Nu-a-#VNs z7IL2?e?2{gJnh~l+wE7Zb2kKjeRAZ+mIiZD_?~GWMp{$-2hNu5n03J#zGx%kMxHGq z?E39^MZL)ZjkQ(Dg3Tt|UkW(5W7YGK0VZ9<6nQifPo#K7#bA*!Xe|9Z|z8-{@u4JGtU2P%Sc=pjQqVhFSNhHWq%!sjb-a^AE`y3?5^`-UmWCQ`14mCnF!+_+H0~a-s(X4 z%%fjdxLh-sZQv^k={d2vBUN`{A;D!A_V43|dK4ZvY)%{j%z;08(lJ)bZ;mpPrS}I+~dvSzGRDX(@FOp z<@8q^_apVUpPU}FsfC-g?nBw?15{GA)Opj_tMFh|PkS%xQP0k@)j7mz&9DX%bEdiR zEOPDFYZZu9SYTya?;XnovgR_oUj4!9&KqU6*n&RWQmjmw>}@jh*D~`(7TNn?x)U3| zA08}DUD$o_&+F*w(9}~t9X zlWHyyj`!>utxi?$^b0?$)qIq(EPGSpY-D1S?wsq}9^Poq30hK;*YkS&+gmz0Be~Tc zfhB&Q_{{QRZOV!{1B-M})_n4{m4 z1Fx46T`w~uoa-%n)zP%LFuW}&Xx^$*&r{Yd@IWKrI(u`io#Wmj$=Bm{E{Ok@P~TnI zuuA!LbM4!@^A1rSwaxjU6MJH;DbqHjKVZEn(eD?TuhM(ie3-O4+t^dQhAfS3Pm9K0}$p zw55ASLWj!#*uERxQ(je7-~GRb4A2dhXv{?Pr=^dcx=E@n-S%)Ex%$xqVJO?D(ZMW+ zW@4u`er;9Ks5-EFoGc8k-7h$~clGw5xRwrB*|5NXHDWI5aq^bXz+DHbGtkh%zDo~d zig#PxyyeUO4twy9uUmIh!*#(xfoMAHCD?>rn-3RIIIM-g+U3NdlW2$J=<|m*2|JTH zh<^@@qx#1<9J|<_6YRLRU^B~q9%!sM=wyG$ZSn?AYLOb61nE|lL;iV*FJ={F!U>fR z^dEeEYFj=tH?Qx*+pD(;$--~lM`E{g6WG%q#s7Q%4cO)t`IX^s^ygn=EV4i#yql5~ zZh0kvf7%KxmzA04S-{adQg=lkk5w&q6qo|^<)K5(GwHDz31d`TeGF%-MbGv&rI8(A z7c27}ciK97ea@`B9N%hlH>|O7*W+XN(q)VfH*b+@(Iq9bOQU#0&U4bM(4QJ}(p}o7 z4yF-KY`Pta9IuTHxSiA7`%2KN(|h(yysbk00nsk;$KN+~DU@Kb@b0na*HnG#tkjGy7DDozZ_1UZkl_>$Z zEg0mk1OE5vyF7NGkeO#vLA5}h$u_h)0Q}{s;V;x8xIqm#3 zzpRjdV`_E*>&_b0Hxep#0bi3?UNEOj`p_p!v6JbBRmsfnlB0 zJtjpEVp24V-DqUX?KqQqPaYZj@?pGs0*-pv8K3d0iH+Par+j5LlJ{{{mAyv-cK@F& zz@TiCPmTRM>uNmww~pQq3tr~L^}LgBxzV$F+L;7%S<1HCu*n7GRU^7};-)ahn$O5) zbz=FN96)K`)4?9CfBep*IfuhJ9(z{g z8Va zHyuI||5=;-78~-;_IjN7j|#Gz%?1>|@@&Q9D@S$TB)v;0YtqSB@Z-GI!aCW}e*{}= z;-bE(y96=w%I1lFBnG-%Y|p_Dw9unXHEfaNlIP>b3>lw4;$;ta*^}Af%UMYpJ@f!O z>~sm4DI}R_jvdGFW77-}zlfrau(9HWOC?@5-8_fon~B0eL(Se>`RHSkN$wTKur;;x znC&56KVQ(D`=mP!Z-h*Vk(*?%qs@t!kB?2SCQ>BX(8GFInKCG!jD9Q^>7*jeH=G{- zgqIZ}ib0rLLxt!=`HhmH;xtE}XGa}HU2-CoqVvwg{(B+q^YONu)zMYkM8jiaMBI1L zElMV5r?=xFS_c6^Y9%hXS7P8&M%P5lN7 z^q40r@7=K^z?0QU$o(=yW_jR0KIt35V~6fQehf$u=LxUffK#{6&EJGx2^?ua{iHV4qo2qnsMZqB}T7K;*)t@Hw6j%cqr!?>GP2D zt+2B5OFX-7*y6Bwn*k!zq0)bOoj2al$`Si4VUKy4&-S8q;YU;>S=$XUy9j$e0_=r- zstqfs^Im<_=I$ONgVA>-b5jtqe0*I$$|U`IdoxR9W5=9sIF6Pc^20B>Q4U~oyw|gW za{p12j5_Gs`c58*>?xasZF&^9;_X&O&qbyp&UzWk|2;jxFfrySZ)@|EJFHoESsga_ z6t_768@c^i!+I{%YaUL^)|Fc)u08fp$%uI?Wu16Wvc1hh=3niz=BswQjUrEZodQkO zEXT22^-J#df3Un%^nmB8?2a$0{OF#AHi=^d7V*jp1Ej#n31d)^89i2+#nkc{UG0|G zDd{|EFAAOM{ax5udqV#>|5*axKgi!S%R_YP+E}jx{3dbWnCP6tGDqR_!oI%b0sm|7 zOcfXSBPZNgCzHO6ME^n6dHLxUvox5!Q`zKx>_srQUb?%FLDa5GaVNs{%NxQ z@TRJuMB7=&Zs~MZKsSRixS1mvkhuA!88$xRh`n|W8`lvHd5_gPNJF6V_7FUOL z=zL5eg!a*Sm{`f@#^U9!janFmON7&yMPA~auTe2dZ(&}SCSKt9&ag8N8>8r-cb8?` z7O0dwF+0MkD=FvrzVvx7>PS`C8gfQFkdD+YDCHG{9KSA(1`ZW(k$LbKw zp~T_(BGE0!YA=k)Azru2x!M|!-(yJCiyDwkzgka@BT2S+Xy$#@kL2_msf}R;RrHYxxPGrZJms`kCq5lN-k2) zP?mb27xsdi?BX-RS%MoP@?3Nt%1$cnynQp_|Rg)L#Av_X>;QAu^m z*&!&gEz%Ks*~(_hVgnL%zFiG;y6MPMIpnTnl745(8T1G5R!bs|$vV7gy?R^~Y@i*~T zW0<2yM{_YEG!_oIt#&GJz$#ZZNq-rRtO!HSiBzhhGcUf9tr=diJY`xloI zUbYy%Cm(l-QPvvZq(n(J$G}QT4C`x)OHg{!_@ z*+Z>%Lob!d{#-lB8fkw>J#sb1skvPJLpEasJsJP6epdAcjKUL!2RB7Jvity%v545C zkLycp{4CZ&qHr#bw)6gs;Jbx>?@H;+aJPR%>Fntau?UB-5>9Jb=-~Ft9+pi}Z%@`5 zTfUJ>CT((WFzm_T1W$V6Y0F5x3{cRIkwg0wVNvuo2Q{#I z{8vXSLM21(-(B(DHou5qiF@^)c!u=}^?##>AJi~HIKB;xum`b2+nfSy%ZH7yOIS=R z@9G#zUn}a${-32Q8CMJN zk61s?gwz(3(zw0Y>{+riI!969Cy zX8A9MA${25h+W#<2^^uTDT5i`mrZ-{_Mn zNj(c+Q=O_ew`T`(_n8Qne1zqL-xiJ<+APWD%BhwW&J3Cc;7A98v4SaPUjKV`5l=&9 zQW(;AqEK@*Mx`X!j3LyqQBvm#LqKyy7(gqh>@IYLW^lr$j=pqea1YcQcJ^b>HMiPg zyz%TiK~z8VeK$KZ#Jtnd@TUdH(FKkGRqX^o9ORNbdT5)W)SCyu-KU`9E1ZeUnl+TD z7$@Nz`5o_(>A0R_nBGW0jouX4mT{Qqz_Km)15T05K<1IqKB4ymwo7z@Vb#6Iv{S=6 z2)+q|TBaz5lga$ylEQw4IStn(UoCJ!sZUe2)+(2>MkHru2wh70eB@i%qUX|<6Mi^} zM`&M!QpYeHVg5C?(f`$uS4p1{H!0TfA}39F@10pcuDXShH8@iBo6bX$P*xgTue`{GY7op{F*loIHnuTaVm3mOaTt+|AMh#) zI~OFZFPgj`IVLiCSLe)~W5^5Ik6rM|VdVIWf_$WadM+ri30tubo=O$i_WE+;9j$pH zL(-;p=d6?heB$vU%q2heke%I--F(8_koTq-YU#tX==R;S&lk2YbH&Aa*uLCfPQ=jz zntYv>k|I`elL8~m|Fs=`klIPJrItFWy11T&^hQ(cun~T2o8)CSmGxGI4&9P@=n3l9=g)PCwm;mjs11`qcjSR&!X+9jB6{!T6YZ<($ zf?WQfEkm`8rk)nT(Fant;2;#R>qWo9!me4T zoWTws;dEDBdD)B3_z^nHZP@qf^yKvMP8YxzC-AbJ zQV%u}Z9ib8`(4#kl4ETmfW%7GJhmW8@(E@t539`!HAo9J(8b}?At4A~04;-Yr@w@Y z*h77g`5a=9A;Ao7V~5vjqL7h-LPi0a$#o!;_b2vHbmd;`>qh^gLfy?p(XNt<7?k-Y z#jM=t9=1gz9MXhV%x9!0L(Ja+@X_T!Z*$c!FoHEoCKnKib75|aUZAPnUr(KhLHi4Wy6v7l_7#xA%diQ;IM;uR;Sr!bk?kQ;Y>&}aoAf-U0@3<(lLU> z>}Y#E?j0}cN`hfq3da3mIZ9b433jkW&Ji^mr~p)2D&R3(=}y{SvL5h)=IyenI#dBJ zI@a+iP#Zy%a{t&yTIAR~!*GTwnkYpmpHHdtYQ!3JW5x^n&{Pb`4zd)wBe{Tlow6Hf z%3*O-&sdh;!vbA_b4p5}Q-yqgaUWlP0KyZg&e0W~K_K zw%tn=&Q<(?<;$vznCitUz&jRO#g?q;{D^Q}@YvZ2(#4#`H}Qp2N)le?f4% z2lNlsCphBy7%*~m{8_r^#88U?dweMX&NixLxuP%O&rb{+*XdN75ct0+Hb~C-6N`G5 zV(6<`+~t@X4_Wz2+SblJE{T%sIu;Fhm@WR&WI%I;Zhl$uIpNmV9Ie;QKh)UmNhTcrIL(Qr?2b-nI&_ zL`i0) zeujiUZLrwc;@*)NM)0MW!c{zm{# zxeJ#_KmrZUwtY>xVN;yt)dEA1x`mnw6rK{+!sf$+Jj7Ak zUIb905@&@xfg@OAGEgv*`~na!k3c{4Te1w+^{Q*}a0ap{qAmDC$!p@hN zsG-4o7%MM1fSjd#v{USrWRr0#@36p^DEG}$K9DyR`A_cEf>9Mms;1H(uV#F>$C6506|!}rze9&oDj6-hZfv=@~#y@5VeROh4cw0 zEouEPQgHRO=Fquj(i<2^AQ#E7`-~U>W$O@g^>jxm%)6XU4xj!zxr*%jSU_H+Ga$2O zkY!8$FH%qvFuQ99GPbgRAlvkT=I{p7Q60FP;0f0tP6fZ{f~&)4c*% z=mV83oJF&QY4%g&u|T#F-g+GSC!|^hRhXz)2>OokHqkgLQxWCN+?+NBuoWnsTMaD5 zJ0t`6a3g0QXyT$kjgj1drc8XP)D58ku&3d-L_`s#i)B`Q|H`!`gX2_7NsiLoxR_v? z32txIGlZiPRP6Lt=dukA!0ejwN+$?{!u+#CTog7;QF6RZK}J#k5Q_TwDC%=zs$NQ8 zoJeT?c)t1E&~R5tC!O}jU%MYjMXmLr{9*dZgBpvFN2#1hyf78pl}+gm2!|Nl1d#qO zS0Q4pOP70u(H~0qkW9-_0*-(p{KNNpdSJs1K<)olAjba}ftb(+7z4859tvb3bIrov zs8c)gzvp(rLEWpYlT8?i*^~Pv;CnUA#R6ZmbOM%2q5x@QkKIfit>{{cI}Ewz1oL?4 zSU~{|q~lFyDn63g&tID_e>a#mnlfC^duA~Dvcj;X83RZ+CuA2S2|<()0g&xF54)zy z6bKlikAYod!c<0tGtV6?2Z=}kb?Q=WdWg(yuaLhbPCX|%h%&4^#U~*7#oJ}2of$aZ z0~hM~6(G9Y^CgENIuKBgz?{hnM?dE>aCQ><;Ln3O5_doD;0!JvK+O_MBtqf|gfk!vC+*`~|#g@>6B4^RW@c{Od5 zTT{dfa>A9cQ37eNKs++b9~$^LY=zv2Dv#@)RsDpH)n?KI!8o!WDPkXWzfF<&5x%{q zt+It-<7CPUb-c+k#hMHx`rl<))DK$I*_*=Oq53-uRi0~Lj?0PeKtWhs)U8wPxB2Pv zByfPHCaZpIY#UZynq(sc0u3chiX2p*ZLV-06sORaTLHXv4*JfTCZ!yXlfLv(g2;wH zUY~5tt-E(b!9TQnJqb?T(-UzfzNYdreezR*wv|{E0MWi1w>p8g!EDE zGOSnW3MADa3fQ}tZwNHFXrL7=U3N?jmQSWavcz=~hAQ17}3=76ut}Pi7 zT^Mt3v)&I`>2wxkCDH-1vZmNN2-T>^;As9pp8r-2Dz>-}v>p*I_qM0gHt%}ihhniS zP_<9kxn|0C9kHpA2|@50*AoeNHVpVG)So=;BFV<_SG`d?V=jnon}%#5_*UKSof(4? zA{spTFl?6#3t<{T66SdKpQh|I1Il;HTYesJz*`YEDD_wQ%u*doltrzS21bkt1@{99 zMRhdg3jJZEMlxZ*_n1e5h80#jaX3(4gZh=YMcLXKD*`2ZfH4V}F2Z&RSE6xhn1?8u zPc$?uQGx^a{BWrKCQJo6U!f9fk*cl1JD4HOha?QIKFSs8RAiR}MKS{u_QZLej|DQx z{x(H;#rJxA)pakJQN9oLsR6CL2>z2$tM2{ieV|cYy1gt=h)Ph1`xIoz;{YFvSUyfm zRrSaq1|c>;WJun8uP+MLdeRI(DC3ZM?C^8+&SRMFNI)kr_F5P#)AiUx>l9VuNi*|b zRE1!NDUYuaZAM&BIGZNe0V)E|JyD1q^_60)ak4ESfXW%jRMyB9l@ss)Vd_lOQ~)y2 zVwmhcl_z>BKLpRVBjeBrQ#@ejMkmg4L6ZQH=TY(6P!~yZjmTgv)j@6%ieG8>*AVBJ7$=3c1U(PvQp2(I18}WO5-R0| z$05$XJJtZHAuvf#8L#|*KRKrRq!&35`owMLSWv3v%TI5kyV|ezH=5GumO<6ncK1G; zz$WF{gcKBzPFnVQuWV)1`-7yva)~#X9)i#4>dhb<`!!m$sh{T2Kl?sGpUh)02v+Ew zW1O<%BIBU;)HZwUJ;h`LYZ79X_yIj)VA(advN`8GD-HCaa=|6|p^gam_ie{eJ$GGC zaR(Ax_k=F`>20t>g^Ok=t{cxnHT>0rpz12ho0R0lffEGl z2Z>5JvJ`)5Ef_77EoP!MOcS1Hzmq9KLbfS?<%MPtYe)V`XUjYFm9g)$qY1E_Z8E3k5hc7s_@ zNl{3F%=4ttH%J6YHVwLh;Mw$s-J1maaQ2o`gYu|7;a`u*Ft8IWC2&< z#{mi8{zvvVlQwP>uT%CO!=zfzGgS8Hff{qX%@I1k=hYdbt535&t-L3HSH$(%h%Wpd zeO@q!O9kL+B#%-)ocJM7lTp3Nn~fp|n$(=RUy0Q&h+6jjt@^@pI`gXJgQ-RIaCdQ! zP7uI(GA2zZ`eLoG0<&f#E>(DX*aJi$7>?b@C@HLAs$>hn$yo^s&7t|ej95`ZLD{#0 z0>);ba$Wg%R|f9GTl`DNW`%0SWyJ*l^nts!PQ|g(gM&kP zL%>_>Lu8&q*07y2i7v`=hqQXWe2ucZMv$G3196m!K=mSnY(0Z+*MX+(bjWwtjcfdf zpSfxkhMJFwU?B^M{aSKx03ja(bzY}j3LKz|`GHGK>v2|gyZ)w+zly{-@eFj`VPo46 zOdt=tTgu;&m9k54c>lE#NuWegD4|pR4e-GEE8Tnc1Cpbh9|xQtNEBGP`KiM3f~{tf zUj%jZ54&gqZ+OEm^+%$dDUjDW?ttow+X+ReT3i985de4av@zYPR@=lCxJO0^0VRf2 za21H*QDCy6e#IX(z(5gfK$ceRe__X z$L?1y)p3l&L!S7E150Ny0t4iz0EKuCqh+rlPn_#22xxF-qE;sZ$ju|xQWA2R*@(3? zJH$bH#Ra^)#>(SMq4|CqId$r6*EoX;szO8a>5cx*5@Jl)FE494mC}Yac}PMIZx)Pm!Xp(xPR0iLDZ4EmPtKI`Z%X6 z6mDH9NP#2YiFct2XweVd8w0M_T8LZN%r-pOnI+wpW0u4@K4pdMaAy$D?(?}xMCs$p zzm!9wtJdw`3Z+o|89CIRM)Y6^4eom$Bts>rUR7PeNE?lYF^%?YnBG@Yv*5j!s=k@- z`auN&UzPn0u$lYiS43$oZ?a~67>(}Ci&3IljlUR{5#_tevyukTYE9>LdYvoF>6k1| zutjY%02TkQc;Ye~6HIt0;|(CpN%Ns32hV`oBVGuij3 zM!$6Z5jHtmu>o>ZhgvBJp8tUZSL^tvjiO&!BVh|zez8=elYwdz`94Ekh5VVzh>>V5 zR5t6e3#8z>*~5t^nlh0k`1Dx`BAsdKDyRG%&voT;(1L;K8$dGUGEf_pEc^3c(iT;= z0{1)RkTRJQonh`stY07~oRH?X|0s0!M17o#m95imG9Ep!bp=RS9y2e21M|gN-tSvOF9_k{m;Hte>{!(>Tz@zdlW zIcgEqzsG@m1n~ip7a8zl;oAC}J)>iodDy%3ynPxgkYdoWJ+EiJZl z%tldJlyEUz8t-GrC>M{h#29{n+7ShDShwf+N~i>U2_ehTjYB5)MSDs{seS z8q!Su;FeMG)NeI&)kG;x8zrJ-r4tyhoD}{(1jT0AFDT5DEPpb1efOjoe2v|7xk;*E zEtOPW)UQ-t2A??3@&zyf22UF;7;tFgm7b7@l*b_O5Ez37AB&afN?BTG13^Wthx`~<#P1%&I@vc+{lJBWbJzyf zp*(NU7%bgg3|+Pe{G)&CWa!)AUOkPLJ{-nJ06Y6Jy1&h0H1S~V#D`r=SEBU;9|!By zt|)1Cci@NS!TTT3l?*F*fW~5iXPU6+X`u4pST<214uV21yXOd6-|w0LDLGvKM-3Lx z2MQbisK7G#s}AJ{G&BpRR=ieKY)1&M1WHDoVH7)ag{<#ws^i{w|3fYVv!v{V?gQnmRK*`4musQg8kw@4vBuA3d z5u5%hUED8;RYLp_eR#tcW$5z6;g=7~x38y~=H?SCWv{z9MLlwyG9_c|H65!OE4_D) z;bNQjE}%GvxY1nf{HE~4CoJz>h6AP4_*JDd;{I0_nbL-oGl!P43=R#FZtva?#IWgw z*mAa^1-B6VKWI*9fQEqO8wj0TA zo*&w#cIW=W^rQqF!Sxgb3>$+#It%wLQ8In9%$M+d4T@n}l~tCJb@{)S+R_mR?np|^ zLFj=JYN&gMG!LN7Ovq|BsL-E`x6LNd!9{*eRsDy%Brml;16H%uRk77paz$Dia6#wm zRS&0&j@2gI+vNv3r}kje|2mpFUAJ)g6XHwk%Tjc$Zjl$nq>-PPu>lWr#^%X?%c)5JL9 zkkd9dLAGQg454=+TwZ^o9frjQ9BoSscOS(J)BcbJwqwDSY8@EF_(hQGiXy!q zyFhI;cEL)Pu3LDmiph+3McD?gcswe3Pd-PB%w)_>DAXd56Kx=UzPo~^&m>L1LrCXE zvWGFV8b@_HQK9Yck$?yu|oVei8ItX`B#SbO{qjFwyfPw?G2NohPVg}x9p7MHSnhN?J7Mp zsU3cvo9MIrsLfLyUIPh)mng|TsF{$;iDX{n^2eZAEV(z)iowqm$~vX)u!#(K z95cMx_9=bX3th5UShCTow+zqPD|n3g|H(Oay8UAN5NU`9gr7;hx&Cj}7>+oBdugwB zR8-Y(4ZjhgyW*J6Ygahx@LJo~v0v^{UKNXnPmh++#-Ws<>Nr@{FuPMx_T%lcmfqJxUm=F zg)lk%rMp-r#>_X4S}7cZH6TBX(hN@;SG;n9IWRv*N*}`do47jj&_S2#Q*6p$c&z`kYzFvuB?%m#| z`Gz4Muzat$0m&$AdJQbIY{EO`?XFyKG0`SQP8s$0_YT`jO8OZ1f_AuL+v4062^%iK zGx`eNp9xFzQ~+IAE^)F##){>vBTJ!|@-0>n4;4?Op2R$@fJG9{?*=21SLR(62q4|7 zurpj{>=^HvHpueAjY1hjES{=ujJzAmguEEwW*-DAZH&&U%t~!r;3uFFcY~O8#c>s4 zk}KNgv=rVghsrQ^wAut~gO3VSLSu-lG7{gGKkF9d4bf_%!V!6j{PwLT-+Kb|MwH`; zkg-}G*kNIxdb7|Y1erQtW#xv#CS8h6@`y0uCaGtH(%&t~Mx9-RYl~)GTipB6 z^PO3_Lq~>$p2`dJAA@vaDC7VY3OO_?smq%1>Q0zh30Kmwo!0Xku(odZccxf#v%gSw z01XKZ%`l`P`10Ld_Tr)8jEO&--P{6N4KdqUf=*lsCrZ8*I*$;TrecOgYHJOmoMk9Y zSHb#MNx}^e!K`NeqhF{xyS$#56pP=={hGMgY#*mrER&d0PO!+pn8elJXlNQQarwkW zCq`BGeGeF1>ivL${m?$B2VtgQc6PhB74nSB=MQdq`-uaP3fN_Bi^n|3*!+iP!X5qOdZb1#6Fat+;6k# zUc}paVD(c5!|Z$s7OU7IJjp|R*~g*kFnW7G2shWyX`5{y7Luy*eAE(D6$;~_t!KEV zHE;~3|01FeimT;$xI#8U+OI?-HUpr!p@P$lG!%#v4+Dg zB_9KSUrgR@ia`qXuFS$gGX5r9vPx=6*3CpI><4?NB_WOF{w7#7_Z`=?NEMzh`Pu;( zJ9h?ZWgfJ7;v(5dgOUh1VvRz4Z%#xPatnVn*!mM0JVhX|ur1d^xq8^erb=tH+7|vm zV9#Z8eMhEcdiT`BwWJ=bG(bbIawY&k*ER!pD8%>ffFG>U`-~^lL&_V8@}{e_M(rna*e;nTex~lL}i#AL;lYSBl5qO7&UMG%Tg?&PM3Pv@*5a?sgP-$xo+*Z zQ62UmVk_wBmVC8Tp+PSG%|FWd}i7n^pkNM!mEQi7-voT)=LeBiIpfQVX%vO`ev0euC# zg;NGX_|lgIv}LEp6r8d>WDXa!kRz0{1amnT+URaDU8sfF2^M00lB+V4V8hes$vyEF z{>V+hTi!QLb|B$d5|mXjY9-Z+Hji{=K>jD%pjJM3XX>=Wq3sqn0%i?vhR&hSDt6fJ zFcb3(L{7_kA1h_k3Ih(2Bi6obNb`dB){Ws-4RK-BHYCf$?gyB+=1<>--2W?-_-=_)c8=Cz3 z-E|RYC(Cdm(=wrr6f#JlYDbkjTI1c3pxUKez#WBl%#i}_53~g{n&b`iW&@_{J}S3a zLPhoyEg7ofzgoSd#lYx7*IMQ3 z-o${0im^;+b>Tb0>i)al$K4G!e4@UKE(5GmU`?Q5^FU!MHlR&4Y0$yGHexjkYhqpI zgWr$lguHJwROeGy^}E2FurLS5?vwpv)mM|{@>ssVal=E#1BV1p zIsEc~^0VJrT-z2u@18&V!0}r+|69%Gp#<8?;WqYhnnQp5_Z0B&w;YBL+j6Epfp~F zk>%qNA@l`I#UTHSxUUYY@@c!JkycQoyA_d*bZkQDM(L35F3E?KknRpC0qK%fx;r;5 z9h>ev55M>Q&UN1JeE**7T$j3G`{c|$YpuCw&5Q@~{lp3ebN#6*oeUri6byDgRhfn3NtZDNWlEk9h=doJUM6<@f{b z(_oFfXI|A$*XzT%tl9704c|=3Jlk;kSLUwfpUj=!z(1KgQ{Bm{&P2_3$doire``KB z-F~sT%%gN5do-p0n-?6(QUApYPZOyi$RsR!n4_8NX;1(Dk2aM0Bkc3n_X42bU=xQW zag-mN5fA2b9v*X`dSIl0g9HDhxyZ`$2-pVdX3PF@+fn{2H}x-br@-SR06xsWdH>D> z{o@Y?wZXqLN;8!Ga;~7wee@NcS2vglIe0A4@!@h^(9eFJhck2mQZ(4yLByzX%n(R) zGzWTs$8+^Ss+iht?faK$5UgwvKloQu9j4md3PGXsa~RAzfHNk*X%nDMIT8iuIidF{ zti(KwEDl}7rED$_J9wjBmAg(AU$q6Cx>e=obRSXM?zCS>gX!XJaEQ|TQa8DE7Xhw8 zvFHtcb)NmUg&4#h69FL17UYTHnjO!_Ooy#y3+R*L11;v~!VjEjb68+M`QOOMn*N2A zs7#yjA5Z@M5LgOL2=Gs!vC$1QvVa4DAY+b-flmlJz4?}C|2_4hu=Vl;eO!Uf3mkj0 zs|NN?m)3p^r=GsLWNd9OJ@f1Z{dsk67M+g{l!f=&kAB^QO-nEk?@r0c7O+B7tGpLg zZ~Xp(<8+`I8E$RT3ktfq_cw88Te5sk+S}{}n0NIL0S$B^!pGy4yfct} zg!GV>zkJeF{pc|@^hKQqv8~_Y1d8MKUzuBM4AtQk(+~?uT{WjuNs%3@xFe< zt;e}5nFWuUI>Ur#H~W9$l)Dfx=>LmT!vEovCR6}4e{{(_V)XwteuN2*A2EW|pMgGg zG;TMw`sLFGKNApr&?XiH=v~j2;en~9)-up_@E-=sr7LeWSm2!uXht~$0|V_>~Ox zY2pYqDh80QuH`uQ>xK7lnQ%ehK&gzo9eO=m3F~ZWV~ZIby?w^J%J-&|6(8{EZBy>A z{pb*osHixc_b@g+J9yDIy}zI`U+zNhkq8qD)H+Lls0LZrrzR={fg34GdM`z&r5ZJO z&%anAKv7s>=D)I=Bqvt;;P|WZTq=F~;Nvv;y>+l}EG|?l{fT3vfPxp=Ll%?Fg z-gRCJY}4!eit)q4AL5_1VP#+?VYX!`_hBfUFzV*|VGd+oYTg@4eY(AJ4O;O$Qx5B| zgju;NfAezCvu^F}Hr>qYhdbI|)oM-mF^o^@7Bw>Id6dcaZ+@x~yp_yf_x6~%*GTic z{KDG`@Oot3zFKFbOuZ-z-KqHTd%YiVL?y!~)qvg@Kz?8?!jEH{YtNpcTi&zB%jnxN zc1CDzg4d!S9v@r2Dr48IK#YV68|oeQJ9&D$9-&sF-M_G+!{)O@vX(0xfZxGOKCZ3~ zI*pn6YbKbEf1CX~zK1lgJ^V8CRP$p{T@eBsQ0)9^|IdjF5QRNtW4b$UXQR;7X%glWT;%@tkJ7JGi@98)J%SY`{&w+B~2DIS|su3VMIjsZ}C6J`6}U3 z#FQ<6l75wmP*a~~&GmUQdJUX2-xAM%sA;W7BIZ9yA&~G84Wv>sQkwbUr-a!-XnG}u zfO4ab*l0;{4M^V$a*Gy)buHAXISW=>{Y%a+^dM;HeR`CUkSIW!oe(Yd!(!IfR#va`FY7cwPC1O8W2aK8Jvr%FY)x#juW0}F$rVdS3(+d5xUn* zeE^ZiZWiHtWWTS+MBgKyb+ieEHkc%t{`A*;>WX6Q$6UH2LN)O28xb>S^;0P<{0OT2 zgAz&Z}36fQm}gNxaY)3fjCoe?lp&K4c*hi+k$Q3BR{#^gm=ao7{jA zq7?d+(=5F)qT06)WEhusKWHPr3O{5$dyni5-Ra4p9)X&nRQN1K@*SH!K@pX}`ny7E z|06S4m0cbZSFHf?6J=gCLY`*nlKL8RE+rn73K>vo*yy{~^q>=yx}l?GN`Qzp^kvN} z`8^3k@mKvRQAtZLzw-jo4=KNjS8)Y!RE#?%>gD@^y7D=jA}U0zN)wCbkEkFOL6Aue z;d}o;cVPzHK?~O4=0piue&&DQGp!F{@Ma-aDut(ah&Iy*C8T_NF>)@OHw!h8rTu}j zU!sj4?;=Npwkyj?(T~ZKjR-B^Y}9GQPw^KD4hcINCquL9mhs77o9~2xe7&rCmw^BC(7TLz4YAj7T^3iQdLh=gybRGXELRb%Vd`nXHsU zY;O{(u8=tQ0+&NEd`DDM?L@?a`zbv3x`B>kz4t#(iPiF8G-k ztv$Fu?et@&PI}IHQ^jjqAc-f9AI0z})`CF6noaR_O^z?kbY6KUG*T;81x4=T+S9os z16sH9*dqfn60Db@=mA)}_7Cr%dh#};8|q0n92UgWA0#KTn{3ZJ_pU8?>su_Ys=Tq0X?Ad%Cc@(DEzpXI@-nq;-9&90BY#KNLjYw95*Fz3Ud_Cpr2)CQR6N zNr8wWZQL)3@s_mLG%h!YMHdFw_h;yk{eGNzeJv~@iB@`s_QVi8mIpjG2vG#w_lgGt z*$vkp;e%uVqO3U)Kt)&!JSmgvBeshR{H6&7#pKW%n5R={`@G@W{@qFtcLip0g z|2vlY_(?JDp}MorU|&h%{X0eONTBchowa3t(Je&CabA5E_~?eS_QRT>Z(~9%dvb*F z7csni2P?*WgU|qZZ3a_cO}}+cZs77eT3Ego=0>hhV6}CzjDi3{MSVRiShumhwLXby zE_pwNpI5&|2QQ1=2h|tDMvEQdrF5q26=q8PyIG|5MP#>n{5!$fw|mK5*u%Jg-!gbJ z?xS(R5|qJ()m2C+Pj1YI~=0j$ca6-j4YD(>x`rv2@zfQk@5~7+wA`P>wu`4WL*29U)Pu1@ziJpUm;#itsJogP02I) zPsbc(YaF=9zq9VNaYX7>OX@PUB%Pp<;p#=+T2(PRdDg#K_nL|Oi=kQM{=`^_?R@mde0dk61JXydl!MoLH9G-+Eb<2?Yvu+j@)e&UEPji;`s;q%$nvE@ zd@YH$ViYl;OQ_?_u_>gfsA2%1wVco$WPIuG#0Fb|_vUWw zJ04u>PXw5E%FAt`Y>*eT>2QnzzaEeD;x~mwbi3u7e*BaSVheygRl&cClbBrez6w9j zy^k&^v-s_+&ndPf_bBWR(Ytd~d!O*7ZBUf*dFX=QqSFRlTKbg<-aSJ{oqj?trOfPo zs6B}F%d#l5(YD?!?)e;RBJlQ*$aEEf*LO1!*Ont0ctVtva;R z2V0{4=%-RYlx>9iK(#TccBGkgh2PHZ2{Rj|Gus`_e8ikMGv=R|XalgyuW)4jmuYaI z^RlgewQVwrTT9C|Y=`rSxUsKe-**$Sj`igJDOsmWUo35%m;YnXqG@S`|A8p*Y5k1E zH7^Q~ozFe$>&dLY{q^mYq_qr|^)BwsyO~#`&Hi2{vWfvtej1-$WY4k5J#3XX_(BZA1@$kfn%kUa(zCMs(}H2>H@eOCrYM5*NA*Dolq_c!^CI%j zFl2NVcmzM~57W{uaIZ>~^u~L{%7dxQ%i;29YkH4$z5lHBe^yfkYkdU#OZKl?2OORB z4K1DR{(o)b3&iP4()?Na|F(^04i8h5(HwZ6}KC+W1!t7j8*!6b8x z38xF|n;EgRs!X2sI6gw*95P!1~pUPovam_O~;${o8FNhwJt5m!I0T zxXWHwCS8y_m*f)UzlR=whwC=+uv6weYj|6G--Oe^LnU1_qag<4wKizEJP~ber5MH`htcy zpqfKE>koo}w6L*akH09z2%q#ab`HYtpVB^}%6xQ_kRJyp+W@RtE>9g=9IMPF19vFI z&kAUvdHx;}p)Zn#glH}8Q=}Qtl!^2v|EZ-N(`OYWONZr=&y-ZvFb5c}now0AVR4WK zlEwYoycu>2$ft^H1Pij?;_1TiVj`57*TVfu1(AQ<;8m*zuHBk>3yCUd+9BHnt6jn-${S0l(hJA+uGje14| ztqg9w#?xn!Ca4v=dV^eao8|d1V)@M9LfFR@S`GOu-yME0TJ;pbw9>~z-#Pg6K5VMU z4#Hhb3dVr{#GTjT*mSQ#5D=1}$Owtg$`D^9vbuw_&)Mp%3$7M3|K`)E4Sp%pUa*Q8 z%-|-~s(e8ov0h;mc_*DWGfiwgt1O+sn0j}L^=>wtQaJ0NH+f)!X|w*8fKKEoisU(? zjQ7dK!=bBf%jH!h)a_!h@u21Ue%H43>UIw5^+2iTb+HeJ0(YZofagsy^mdo~;C>a} zaQo#7u)i9`6N;vx1dn)qc%-(}>XDl85vrYtr*cJ8@?esDAeR9_NaMlm?ycxV$^19iCw%+W+TP9u4W)kr(N^ZB?wd<}|jtZ{#+XW8_ z?+fpJ?+cpl_7@(mS|{bZSZ=Xjb%TM0gsc1=9~RF?xp+n-2ugmTuSC9-60J&tZ+wmaFLpPe+%-)Q9upNbl?Z%)2t~ z=Aeh0R4BeT?ZVZ@jy(Q`p3qGqK+W!b`3+plO}gql^R~Cl`+S$p`(!t>`Kq%Z6JWnT zJpdo;-gc?k<0P@{{%`@P1Mj<8_8<+vTT!@QpI*9$r$X;jx|SuN>WhaD50l&v=bNs! z_p7@H4;QHiNzrD&sHf6h1jZ#VppH~g!9wCJt4+;!%8ln`aW{ANNDr$$?7t8}fSz{)g4}0;t!QhryfiPfDGk z4eGbUYpusZ-n94QcZqnL(1jQ9q7N6g@m&x5aeFMp553Gx4_ie)3PY!y?o=Px_I-68 zw%c!P6@Zvl?HA-RLuQasCmQ&R52%?3ES{6ECq+6Qofc0x$<@Nn|kfX>Y_$rRC+?jYDwv|E~ zzqcn#u%$3lwphV*UaSX(-|;3MKudrKZze;l`+)GUhj-i%MhU2H!{;W+%+k(td@>V*IwZOTv zZyG$_S?AcnuR~UPV3{R)`z4FN^<14-JU+oM>1xf04yrmsHYsV@&n!w(p(VWZZ{AAP zBud|{N;>-%u3O7E^QI-}eFkkkky}=Rx%ZdPab|VB ziYM*JY9StGledSznJVgP@(fcbDUzgrES~+Qi+}u4vveZ}J%90&T*{WOIZC7%iWn<< z0-p-y3zmw~!25@fogX(-dLD#&?aAJ;<_^f_LpZHHG+he@>vW7IhV8RqyD(gf2{+TWCm@+`oho^f5G#4>T-Cnaj!%-*Q?@2tpF6cRj6&)i!8iTR1g` zqyhzJ-#})Srb?SRO@|T#eUKG_HM5M4(^N4A!E$3V$Q8dTSCF>xn8?)3E^^R-@xUdI z(Qz?u^P4Y5DbNcug_G_rMD>Tl0a*r*&qgObMy|4yUyR=5+`wq7tW0DN>gAekrs`z~ zLQqa5g4408O_lC8q6-J`;p_pjm8>w=qu_L?`RHz>MCnzm8JoA$_bJectPT}oEvP{u zPY=;~X+<2V?Oy)cSdVO0z~QP-hWgd^sjtLO;4^rKDQLOjPIO_|D0!r8B{BI~@R`{A zRa5esmP)gxQSzXfv$)_X@*s7Obk!Vw+=}zTgrlBZTXC*Pby91H%GYGi#NYvMr;TjUHq5C}6j z$h5uKsqdYiZorO6s|n#qc4GYCflcj5Tvg!Q^E!1@DM&q&##(9qL(hb5ZCFojx@9vr zP-|wJP&>Zq=qW=z4m0ZyR<*8%#Z~fMyTsNDcD3*ty)m>tkdr zax>vnkg$bpiwK#P7vyj!8}m<7K7Nr{FYdAL@5tqTuO)O-!n^7i+q=Iue(mA1$q?(+ zFW?Zvd(u;v?uYyx5#ZtEA|NH5PZ+21h4RG~55((d!W?gG=iHxJ;su8(m7fcP4{14L zi+7ghuGsAU#^7$WFeB*veWlbyR2X4df&9MLZZtll5R1{6ztKja*apNjzu3+A4OnPH zj)?L$YQf==HoXJ9LE3!o>D4na8vf*v?Nrv)r;RoWmApm(#dr_JljJ_4SsyEtA>Izy zXyJhM6;E)^o-cSQ@g*_?_*OzV`1(7$R?~sWGn|(FFubE+on33KxTQEgvo3ej(xDo zS3~VVR*s(6bK8?Vn*jj>4UU?LJKIAafQ|aB{x3$Fo7W+28#8sOvfgFnltHpBGLu3- zB{tj#1e|;3GaMsVW-n6*?p#VuhP>s27cyLWn?`BAbr8;=GMVt z;>5G-Nk>OL+L6hQxXE(_J9BP-Iru$b*3*`>U;Gl!afk~5%G_m|6^XVQrLs%QTHCRPP3GlEqLWSCI zvO=8`wiihhnp|6>tEa)uNAQ!}k8KT4{$6IPTw03SVv(Z*T<#YfR(1{d^rcP<%&{A8`t zJ-Ph(Vd{yV8DQ6gs3l6OOl@JBBDsI-&QF42R=JuBGkHUF46K`cZw}+A_buN*^o-RZ z&6drzWuBU;DcZPotP zW7OsV|AcLbC%~W2B=Unl^<3w3HMb!FIV6$Ya3@O2wboH>IZcfaGP?^uZA!oN1p_Yy zyvFq)82RR&|KKS>sbhYb64GiUpV2<@BbeQT&Fk52tK2HBd(hx+;^gqV zpV^K>@?d+O-SQRtCop>e?XDT*Eo2JHgFX9w#@?nY$JpYGSJHAw<%wtw9I^Ej{F^3_ z66kuh+Wl1-J5wM&6l!Zi@Y`gaX!~JA5Q?X zJ+zP$+mhTOZm{78-c0mHHJn0NW>DL%XMVbifzOCSr7D5P2$&*YrQ|W18nwG)_wper z1CiU2STJ95XmVCd#s+dx!%RzCN80St^Ksb5X##{$OIH&}zX=?~VNOfDX}Hdu<<{uS zL=lX(`tl&lJBrdXk6%*<*~4|DnRs+OuDtRsx;^u@(<~epBERmFAi^m}Vr$bWM>=GX znu0)&--N(*^We_{+~j^DK|2td&&7UIRF523yHoB(*UN6vau!e1h=5;5|E9HZ&v0L> zY@QAuEesQ5$QivZaVek}QA-Ald2!Xa zg2Ev6hrWyjcmgpD;nQC5==v}U6_7V)uaFIkmOB6FjoWTp*%N!SdGUKx@7#n_)c1{0 z_U%uuM%7brVNW}XJgx^$nC zP8crk`BHEm+{(J*$ zn%2ZbydYL2_s`TAF{m!}Af^2CIre=?<1ko9VcY=Nh!opv5CoBgJX4A*NL{epYdKnD z>E{6?_Mb8s;InW-hvh602^XGe5l~cA_LgbPX6%gGGJG+jpwt;w@i3U(cfVdpT#M5< zBUJ*C;=Q95h-n*x6p^xC-pjnd21_^CYPJDNi~XdPRL0Z>!6CPN@EuZtNgrznxer7Vf3pLDUbGx?c)B$u6~=T7$$t8U-9gh_^U1>4!hX6bq;I0BrpW^=oxZ)f z3ZVM$Dd*N7n{yM~ddPxT@BI!I7BMKdtw*Rvfns z0~*Gn`@C&;{g^v@P^v7@VA$v5ylt!D;Zc<;>+Y5G>l>&*uEVt>2Py+CSM{g6v{vyN z3(|Y%ZIwztYtbwjYklXON%*7p?bKR}#%qpHP>7=9x|a3YOD0m?Ywj9O+Ve2bv9D0~ zp|yGYnI%ZIxD{OXF@w~qu2z&^I(ES4jT|ukslXnqQLE@W#RTN@Esoh6D2Q%A8kRuN zmIt;Q-70lDV7u0n2U_kOL*pRYfm{d5ToTH0Q0(---%W#C#!z7lFK^J4w+fOASHQo>g=+!4_f+6LB=TRsTM-9= zWMl03-^d2dV6pYQhfWI@uEpg}#X9IBnBF@vJzHA9k=!+rU=PL^*kh69OKCsrK1DQZ z+O`BD2OQ-inG;5BiB@~IFUl&)z+Mw?4hR{$6?}ZLg|h4}-PEyGonWiT=PVA`t##`s zaX;-eR`j!b6K7Y#wxX%mR?`w7q*o!7DQUOw5W_h40mSnIWe=l$ZXGm9PVeAbP0p5Y zV)^G2W_V0SJ9QR!yU7E_dz#Q#4K8>P;3N1Wdr9j|Xol7?c|@W}wd{kRI@c;~h=lea zsQrvRdMon>UxDGY30A?{F>55}^iFsr7$OWCpq>b-;lp(Q?DdiuwF>PUyu<~k#o4ru z%bp=NVt=KfdCpl&aw~Fwit+_U+ugR!M&!WqLKjG%XQ`~Te6RuClOa=Upiy^IxGYr{ z$jT7AsFC3T5G_uTn~?P&dC~>R?)tH=M)j+;oI8R_xZZPpSM_899XI(Fc^uTOx5ym%k8QS|teBt4cNEkp z-aUk+P!;W~sUoWj@S%Yzl~g^u9-}hu9Pp$)P&tC-^H{@Hk`aI3s89xfz&xR^EsGA| z8r={Q_G8+o0sFyZ>BY|=XU<$VuY+U_E&6$k#>hchGa(N*V5-GaTos$+Uw7EhfJ7=( zPY-ZiAbOF*IYUr9|u{SRpZVci?A8KwWy)** zXs}+=a)9L$Ebio+M-gNAA{w6=7~eIx7H~efkgVZh<$Wn-g@11v4kv zc|rGY3MKNr%E6moJ9XUW6Im4?)csEG(_&IQ)4Yq_#uq9Z{kM(UlE4Hl#l{{FY zx+lTmT4PKk}x%ilh zwDMeY(^veV*MZ~s`_uO~*8HTuV$tbHQPE}TNp6N3RsJHW7J03()!SBmF}K8;WyRO%xxCD}Z}EFwscePcuUO)ed|0!) z+mUMlaubxg_vwuXRr~q0^bWKeEe^k#l#Gg`LKG5iHx3?F4i-I+W+S2QH@j@WbthZv z?WFAx28^E8Q0|)-)T>#kOtSSI$+Jqs(4V!~jG=cB?g~-Q)Ah~Phui*>#9CEz=ApYm zp)rmtdd)AYEtF+FAHOzGF*y=w-8|eLt3B)j(`p6}msJgWe5p>Ukf{4L8=t9Bl%FyM}Mj-;woZlvf5pSO<-8dOxB8 zyGqIrr{6{ggvPAI2=hd`RawjF&5TcF=6}a!EkG?I)vicB-DmKTy_KGjnlGK$Y!dim ze?D3=&i&Lrh}zp012I3qy#7KZ=Y6B}&rg%oza?v|MKBOmFj~tHCer%8NxyG?B^*h$ zT~wyFs4&YXi?LZCOJ2LK{5KD7=gsm#8W4QPuCuV%t!}lBt%|(=tQz_P=|tr_eg3gE zS}|e+t^z?j-^PoFy3G6I{;CZp1z}BrBTMSL}{ zy-ts4z2^rJ{YYFz<8|G?a zTOu+UT7M?Ep}}fmNg^^aX7{ei+GVF{rYA$xB``>2C^V(1vtkcPtWs6*xV%Y}Nk!H~^1w?hNJY*7FDjmfoPo3`mbj6I{0?!Z zjx-(F9ucW2s4gM{`85)vU|nMtG8-b&0d3u0HuAzV;325hHt?by?uR>6n1H(^shu%9v+qFi=o-u`{L$rfM3 za4*sN5Y@oTHWpJEbEfSErTv{iWw@O9%eUkTn4W;Q-W?Y}uWn77$#1%jh+O(qUSW8@ z9#>a|y<~#K^D1NY&37a&tF>;oI#=JpEXHPzhILy}jd*eIXN&JX2I-+;B(R?W$FXeU zyQI7b&GhrmMfA6RqqF#6-)8DNgw^csVXuhWyJ%nFsQ&lp#r(7ab+5)JAhtSgCs7J$ zs=w&ZC5x9b4)4=8ayoXuH1-jw*`%q(mP>3e+su}IJ!b)P)E%a5u410$+O9*5R2cQ4 zKs@rsd2OjU%XsjxpqNnJHQV5Qe>2>=*H!+r{cG9UyYKPJxmm`vYPsUZK5-+J(T?mE zWpK?x*Tw6)IdNolv%1vfikV3^L*90;lgn1n{Y!S$J zuthz0X=~QAbJdWMol!j%X?RxRVGVL3a2&0=r34!o$9I=j+^T~$Z{~-TACvL*PR&qZ zQ9I?ohv00%a$RvXpD8CcO!&XUd;$k<_>FVlKH;L@g?JuoPT$BMMXYd0k!1i_wjIH2uZj3ICcEP#)8H z;wE(0%%_~gx{!%LB?^sJn00|5QwN#ER0RUcG{whtus+9#aJYY4evi)0#Skc{*H0xr>Qd4y#eaLQl-C`o1@l*8B)l zqMD;RdmUa@k!DnA1rBc5Js(>a!j$1-QOB$#=!VTzMa8~Kk!%b|xklGv*np#rXJrTzJUXTZwzZF}ZIJz+K3$Pd}zPD>um)rL09aO3%$JP@3nbel^u`J{9hA zUto3GZ$v%HqB5LG7}D{kGJeREC{Jrfdx&xN_xZ*ID`nx!S?+Ce7U=8Oz?Grz`D>%@ zhLS$AKP+SD0>ce?RGhg0ty5hAg1!>2?!kPpCO&S_5S6s(;^CAByr`e^zUO zY_3dYA5CBcZIR;8&c!e0B7 z-_3%a%CwPu+sk+?;%50*hI(y0VSjcrpSx`TGdGt>`n@Mc3Vt2(gXcg7&N{={Sb-?^+;< z`)~J@875~@`RdE^YX6+2-5g=d-8bx$q8Z&>Lc_BB{grJkxvZ;=Z%A!h>b^@gV(gvv zkp5I7PJgA&Q>Z9d>0ksj^e6DnV|vp(w8OoOFQIi8(_j(hTIUGvkr`4(^+n2t_JxkH zO+L%Z==l?*tuy;&viE>lEcR!g5Kk#%Ldl^BtY&Av!eMO{*_C{kGutdvsH`)CQ2>{$MwWEcMc6uYKDUqIw zpqdQX-|VkZp+smmsORRTc=g3$B#E;@dCUG|FX+v*tZkAdYkvv87q5g~tgb^gYfo5z z#{MLGjs}gMPsxdFYqPeIlOJ% zWUOg?(K7nR5MCfu80!+8UH<7H8QmLcQ@sOk<(sf2vBGkcbBrLL)*p&ZLmgVZAH7V6 z6pjLx9n`wfDJmKD7fc0g#%y9F9LEr{iX~T#T{j|&T?K<9F{W=@h|a%9TZv>EJL2dm z+LVe$r*nbJrn44P!a^;0ZD@mElTbxS_aEOVm9mpDszkBYn(7vGqrqW=;!86f_|nZ^ z+AixrqL&J1?7$ZeTqVVwPJ0xefPSp^1Go{U7qjZTjI051E4X zrHSRO&Tq*IjM*C$O8C1%TaN2!e-}&L1T)&0=ji}KUph9OcBYJ1ydq|bG}+p|X`orU zRa>eFv()%`S%!b54;PXgLEk$p5v&!lUg>^jWKHL_+lY58$@7jTK)Zq>dgW||De41L zwYIBPO)(Rq#I;0AfTze9KqVm9M>MWUf?pZ%awX?06=#`8`r&taFFCCUWAdpOS;qH9 zF0ggrLQ;x`pODpI z9VD2O=wjGCF-BAuOucxG~bb>Ak|S5QVyL!ZfWZQm6lC!sagXSCg$~NB65sOi|2+@{o`J zphM#(&cd+=k=Q@Mj9(f0h6%5`0gx$5dD_rCrfT{y6#B93eb zm$3doocFZ3_iJ$+RRnNX!z(A=^7Rf|Is*k`_*I{YhcM4Qw%_sKOrr|jwc^CAEL9qP?qL0{{9i~p+RJ2mI-ddS zq4LQ2=P#&NjC7VQ%e@llG>PpyvwFS5ocTx3F;ss$uuL5ynK3`r>XeYUwh0Beu-^T& z+X=q5q+AqVFF*_=BYQ@yE9a+Tlh&nRI4$mCi_9-g@Y!>29HzTjzC$vfdD;82SbI6! z3;yf4oZ=b@b@1F?PPE6OPjSiGo0xjnDR3(XxLu2*$~5j%E{*-e%IdJ_#-?5V@TR1D zW6AScAG&(0poU|4h_^|Z`sx;Nx@UFVdpKe9KK|gR+ke$i90kd^Gj%;}Sh96Uhn=IG|ZZ zGd6r#R<$%p*1Be(yjjo>^-9`7f>(v#UiJ@r3zoh*L*6sxF7jXzon}Jp=VY zXIVFttL0CH{m}1p!Z1(eq0+MJ8J-}Ep}ln4V)Ne=pq)SuC=pH60PQ_RJFT6Vb*CU4@l-eyc4K zN(DVW>H=|Wu4jv5=>dQ(hqYOkvUD@H>CpO**S%f&*K}#Y{)YP1Nas0k^Pab0Vh8QG zVeA+|DW&4QEoGq9!tw)MuDStq_fv@oA-30E* zfhWA>f@`$LI(We4C0+w!wFs+D8Lux2hvllU24f&CpB=UTfW`s0@uyREw?o~H8OeYAtn&>iypn4M0ZvxDWz3_Ct=Ty=1IrV#9s3hK z?{W%9*Q!uGB4UFtHg;9HMsYETrD(jl5l=xU<%2!XAoZZ&O~L$P=3C2UD0?--OF_-j zpYj!@i57UleZ9P=PiY;2AevPceE^f#m&AFEFNX!O?VcRN4vJJ^HJmc_CPDDi4jJ}2 zckfY}UzVH@U*PIG73fAS*?3odW1sSlc^ z*8Dk-607c4=d1e}@rTmLJ)+{rvC)f?l*GBYBXU5-VVxWf>rS6O6I)s<+FXegVhU6h zR;=tB8c}z;R1J2*Sd!ZFSH4V2N{Z9GVy_*O>(iv(5!VsbWDmp1>}`jX;GV5o6Q=Rz zP?K2b_OzAp_tcJy8z=D}*W+zn$4{l}3z)B>OLw7{HW*YQJf$sadbW!{@^N0R$Ma}h zashBU@@>JcJaTaA`e+vFAoS!sz#PsUgPEz-5w_ySQ1C#)8jntdNU~J(ieat}M}ElR zXO>L!$-ais>RVYG9lvyR$-gJnBC@8{F;Cz!)L629=YrIF&v>%%q=#8JR-C*DRAgny z^>}zOY`fI| zsH-PtjLD9A+}Uy-`!*P5C{Jnss^*s3hI``K4PF9sLjpK@{jy&Y0?S-n!V4h%(MM~j z%yMk)jO4izy-zBdw*u<^KDC$rX(v`2Ky0D;<64fN0$2Ijh*IURlEmza($7zZkq30Z zO>+D-UP!gBe&X4$TAd}URcvgmniSQR>hI2?NlDI8`~H4_qi^(1H?i`3>804c0Rir|3JxfBy2nK$)@%kRD-yA zM!58gt@grMg=@VVvJXYP2e6KBSPiRt!4bz`6xvr4#yK^ggg&Yu3u7B$K<|Y;e7{@-r?=+jnq{iVUsu8#bNRboDnEM7^j!X6{w` znrIsKB&ML2%alX3l+B})aix8zRbIz-PwAYK=Oo@TIKnaC zlrmTUJaVC)FD)S6HrEd)c^-Y&fDCK%`E{4stlOE=8#GEcX3Or~HuCc$IZ1_^#en8O zIfl(Y+f5Z=1#)`Y>#r`S<(>So-g@GFS!&QcY-7Wf;a1DR*5IDSI!X5B>jTyThfkIQ zhR65B^d;jvosRmZB8Lf9Ug*9dWJ?qI6=#J?nd*5kk0(Je`-k>@EbbElNXfd0ePA;`%Rp1+M7xBYi?Qv}{&SoGb+rp&~_}Fw3>~JT)|} zwI}t<@;#%kD>GNT<`f+ldqjcn#{z7Vt~NK7pZ*tnZy6O=(6tLD0Rn{J?rtHt1a}Q? z2?Tc!?s9^=G}b_nBv?Xl0t654?(UYxU7I=N{qEekYt78M>(0!-`O($Y=afHtKYLeq zpW5>D9J}G`&pBs4y6Rq8xOHv!96vFTCwLZ#lp+6*y4^Fq*>Hp| zO>Lf#z23BujZdstMGT9xq1)^U$d$ zD!_r9OvN}gAZzV*!Uyu0ie<4rI{!U+bdS4ITI5zTM(Hf)YjyKGDUGN99teNUQnxnY)_ zFv0Rm^6FPIHeB`%R1_mylBV|QMrmKP<&QJ$&>Dq-CY?YS9@BaqARywv&jqV1#FYH%#Tx9_u9^>Yut;yM(cQL)ql{;HZVF)KRx6bGEM;^_zd-K2on~$X)C_s@g%Tn;&OfhC9j?@eyQZZ3 z65hP;nsOC7Y*`MO4nFwkI)xvfnK`U6xync3gypnduCk9a^5hNwTbT>%T^LzQX3%v| zR&ayCvp8;v7fHfEr*N^@vO%D=!sdGlwxFtzL*m2sSEtt~Ucy0sgASzrg9I2SIGF)E zeAzx<6b_F}`Rv&pov0@&PJaZBQp|O}lmF)O?c1%8P|i#^kw-qgRWTP!j%-*VX%8XE zTtAc#cZ2?&sQt+Fc-y6>1>Oq*GXp*nbbkA8?`h#Xtf8WQ0Aj+0**#O_obW0-Uivcw zm)TJ8#V(pwMr)s{GlmRc)6vXXhr(vfCL;}Xr zJ_hj+|CMcg@tRZrpK!bL#+v6AsR4gdP>EyF^Vn<rF?M=zz;w_O{~x2q&qE)VV|h62uao~1f&<1GsMRj~e;5N_BC=4q52 z3Xhdl3kU21BlvSjc775gmvEaS;VjD%f9O;or1FFK6W@4fp+4F3W2-T^Np0O;|8Ch- z3^^@?Hzevhl8#8l+A~)qLGIGmTDj+1@;DXEiDPP3Vslg%j(``wr zGC2m9!@#h-G-8}Y>cIrEc*RSD02S% za6fxWDTC}7EWBCiww!afs}Js$nlVaf(8g9!d4}xI@XNE82O2EwV(KqDru#>KuG&er zQ@r+*)&Ztutr}`GSXTp_bS{!Z5kAaUz@#}!ChtRw+rrCn-R@g+*7Su|yO~z@DLu^N zRji%cxzLoS1yRC3eF;{me!iMZpZ2AMwy$H@km7F%*%C#pks@&_ZDp|8EUmBPN2I*p z)|gYcVjE%RzuEh(98yKUUfcFR-F=hc-fl5>wMz*I>nSCkI}qN#W>0-X&Dy`{&Tv>F zfskq9PIjiTcq*hJDYgz6_LV>;Y&HeRa{A@=~z|PGae-6Z1ivQejlvvNCeR6 zP4E)HNOW!Q@u?!)?Q~Q%^G;>jKPQkYEFul~l}i!4xv;kLOc=Hb>?n3I<-ZJtUS>J{ z%)}%IrkhQ+iie-7pZOU&h@oD~EAUnBIb3>1UYR~Ti@=QqR52%B~!)sp*qW` zF3Fl8XV{jOvwOIw6-KtbT6%0(%^NY41yvK&wO&$mi&J&>B)35A3#@3KGs0L!G!E^I zMIp`?L}3-j5-9F=zcSsH>c?pi9y^o$7PW$`!j+K4PXBWD>U)}ef&x@7 zzOom8_6j|=`Bynx9kB1yx$68p^%sLW}_Z3n!AX*W4AiLDX3LLATxh21gJQzB5_WV7sp_1d2 z0A$4*qOB?)rs>|H#E-$?f?CALb@`qo4sAa1CyP%aQVO&1{m&$x3w^kX8{?ASBz?=} zk|)w0hDXAje(o1$%OAeok1FmpUBxy%5F~_d?$LADpjm{aw>4QpK21&Lf&EdE*6(Gs z)^#${LbAZs(O>*E#)_uDy2q1$27t)U=JSmJb|Rzg^eK8Oaxprp9>aCsZELkR zUW%rh28%m(0T>9?P%+2@u-&^~%V*4eSNI^+HVK)jfvBly*YY zFzqdUzGkjg(v`1~nSb$q#0$E_`JI1X`zh`RF(E5n+r+9QLuR*X!mO-BE~$pCNC2y6 z2peKOKG4x=;?vR%5GWoazh8H;?2_4KaS0Xg&q1te;JpgMOJ3&G#7i!cUT>3B!Zxi(CPCQ+UVk9-978<+l z1Ai50{*tZ3ck(XG*Vd1)M#@Z27;-xJ?)|f4<~6QuQs^$yxo}UHK-AWisox(^*yaZ4b!~LhLYcc*63SU^Uc{Yqh}+84M-epYUT-FMiFv)EB^yxI7b% zc|&bCyF9pAh0agP5+3Ta!+oqS-BUCvJd|H$|lqSg2@Y-qB>g^{Og6Mx4_M7w&M&xJWAm4Bt)rsiQ6f3-%#jTDn;hA&?8}^-R5|lDRdO&m8I!BTkAk*N?kZI zwI|wAfymHhyf6Iz&blsy^(te6|8osFep`Uw3f*~1&C#Gu@`_Fu^S32bnx_D7nVyaz z%F1t8tCb-5U7iC?m`i-y@Dt3$_j_4wU*p(XTaB6%Ly*(+%m74pg68>Wk-~BDo-T&5 zK^sN}Fq9dW->847&8lM%mhOsD_p0LHbyq4}%_u%co4JrYMl+<^jcd+%crz&^*s?j9 z`3^mof#2j)8!V2(n zNBoic;xHNFK?cy~4|q$=OjF)zJn+-#sS+w~N%rlJVTpRaK)uX8BSgLW0))MBB6V1u zJBsL?44?Pd7k-=4eaCzR_gY8SA@{9HK@c>>wSf@%G6cLa2|chjO@X7)VReJ_QKVjaya1g}12CY%dOHywXK3Aeh|6k4pe zzk4a7-?36B+87(kj_`-2vD@80Wcdw072?o)wbJuscDxl4vn4H$HbT_Z%66`gJNQd9 zCFN6v`Ncr4=M@pEAEWVVW-njQ3*<7JUVDe)U(tdu^{+enBHUeKo%E`Y9d<`4hKAa1 zS?}BicY+dR-}rPv?rT1}%FEN^ zxQeOMNe6xf_Z#`!ky>=49~&_<&bP>FVe6Q+z@KG+I(c!zxtVj)3bh*VpnuGqtm0Gb zGIe0YR+mv4Nl1KpYwue_u`ta3YpvhvSyS#_wSMF>G_5I3OQS-+c+4`w3Vet~6Y0rN zDMF^5BKXH$CL9hu4C_PiIw7)diK>Hbb;d4ku>2+=PvksGG$7?`(%cb-l}HQvIBFr% z>R)wWwO?(08iW6))vP$a0i!e7e> zNYp7C-ST|lY_Uc-8C^K7Qg3(uk?Mg&^b6m?c(&?xtXI6K5)AaZZ5=xA_A5Ha9H}raY=b~l38TmlR&P5gXI8t75feQ@nQq4x%?(d z$8_C$k@KAqwx-3z`wp%29TwAj7RC8lK-2D_XW>w6As(rPvRiKMW_ks&xTeD}7{~YO zp1)akaek!lp8i*Ekw;ZDZ*zzTu3p$-(v3yPKsE59Y3abIs9^f?7Fx7>-Y`&K{bhh; z8h)Bn`tD~7Pj2&S3?x03sFxCQmJIhA@Wf-A+$IFBunh=l<3F( zdv#$J6Q;E}>6m3N6ACXjz9@}aG#Y*G>!{Rb)e~^ki(OJTqTEbcg(8Lr09v%0;Q!MY zE|`k;k}e-UzE;#)-!lz3zTSA{;PJJ^AZ(EB%ro7d@TNiOg5V||I18qPuf3p&pJu^BlVaMl+mNEF32wg$8LBx;37o6wG zpZ5x~l_P#IqR#R_L|0;161bH=_ypXOM#vjfBYy6A_g{%$$QjLtAVi!UQF$5(n~VrV znf_Gipl=q6W5{IRk)ei*2+V+wKkE`T`d@_%M3KJXlB?W5?{)4W>*A$ib9Rde=+w_d z=6IfxPx`A#$hj-B4B)W3qg$d$D!K$XI1+y@ZI*#vBC%;qNG`h=zP#_Q;LnYSdTMQZC$C zNgVl4EMHPd-Va8C&l}sY8>9Q+y>}CNv4gY&ks6kW=kp=`AT=U2`XSUXc1rpzY(oxb0ZXywR5!fhfBK4Vwwu8Y)!z2N!h^a&8Nc2>yDz0Yy zFE<04${imX#nN7a#D;8^wv9SZA`_n@G)lkTnTMDDQ!~TJi@MZ4HhjI*(&^jml|yvMx_)o{J3RKXiG7x(`xdqz*l|if=RNOz z%>iA%rkszN8S1EEuCb~>kJ&Fc3#_QF@DC{8Jr=|&BVYBwEmOyYeP|@;f)$bkDG z-SBu1RAw=N^{j>=__5A0+H?YHZlb-50TX?Bk)%Stl5UZPL?YA^pf5bYa z^8j63RYyfSM>cNvCyF&$=VInK)lSY54h(|sA&NBz=NPsaSZBqb@GBEC*O%+b&i1F& z6eQhhxxej*e#Wjh#B;9l$L)1y4=*G*PhN1+Zzn72o~gd*{YskNo~($W$p*DpLEwP` zD+pMON{D|WHP~7{Zwe6-g#=^Ys~?ol8SURuCwmJu3*< zv{U|AKmOBeyBgZj%@g0#nvB-+8){!Kn+TXJ;uFeaafA@W)^ zt-j+L?_U#x=;=1E`(#lRO*W6L0G)X=;K{$aLjyJuGy$bL;r$forw-o}FG{if`*kk~ zGP8(v9Ou`xaX<%W68{iRw`H4`3K@b=1ZihQ0lz4I_pdg79Wo)`h}urhdX7@U?q`&1 z;m!k`F`8W!gW+D*WKywfr6$FEafhN^A?y5=guWgcY~3kHS(bEb~MqdP9(KXe^u!co+vA! zX|kpAd}n-H_YX*D>pB7{ba)*B{V_oXif^ej!vD4TuN(4bIQjoN{Q9%t{Y$FLSL={J zv2-~60n$Oq{S_Yw-=Ly`BP7Y!k3eLGnpLy;V&ho%RLC+D(n$1$$|tx8OfhY`G|O!a z;RHww<>-R7&>&QsF2(A7n>xAwdp@*0ng5Qp% zV_{ht3J(6AI4y5+26rF?O@oa)&?hK4npoh7Y`{9W)`SO97%x|QWs*o4QMJdK-Ah$= zy>*?d3bB!gyXsFBcNKP{1b1+2Fi#alqly{xA5GpVq((h6@S#e+cP|^Q&8~UCd33eC z!UU%qLqAQ2LcJcfny)_xU06ksQ)$1iK29|hGz!YPo|3arFl3miLcEhVhE|9-uQ*Cl3L7mnRGyqV<*A2ao6&e|Vng7r9xhYwZ zSkvWg-H|83r0NR=2&n>{%biBDi$Ega?(E3@`5Op9&#@wihWwO8i?VB!2AkY}y&eIE zJln;-6X#xz52UB93>qo@M7 z(lgYN#||uL(Eox<{NGS>GkF{aC&^KFolTE2Tpw+YgSIjH*dN_BX!H3n*RsQ5Ml zJG5*Y0qcLD6sS|@2;%$nNPB8jxV?VTk5!{m z%41@2^6=i{W4|-497*$~rdRtaY4?Hb*CBT+^~_Q05{RYD+nTbQ`(;y!Zw)NmXhw;? z+eeh*_@DX)9;hy~V)O~5i=`m_K@slX8wuz#X)9w`QsF^=FwCQW5Y_4AMY}V(=wel1 z$UvzO5nj4g}Fj8zZ|s!+7l5Pax{w2%w|42)O^MQP$Hc$O?0~ z5EIqCjL~-s*G7?Ldu)lIGL6UzqIeEPzeErMbiojREner6ee+ZKn*I6@3*5hlogCK! zxSo}3XKvXD!a`0s2B*T)~Ij7{t8>ZX8xaZR`BmT{6>(zi`n?Rdz z->M;nky#wF>R)GtaDdAylzrRTEL@cvS#D`ae|Z$Sm{}*h+#~SC1y5q`Po3zB07A3D zZb3*jJxqP7{IS(Fo6RREb}m!UNIEwhf zS<+S=?8~%*JIxI_opUVwg}Q#OCsrr#jlvt}*rj;_lyu+~!FlBHS_jL9e7Y)xYvp72 zuF$;1>oqOnyx3F5MQrC-nyvgOyC~TX-lzaVXUPfZJoeR`++b!_g3eaF#EvF7s(uHb zEV`lUfH5#>p1)f~H=q~d0zALaYezbR9owIN)D`=|ul->p`8t@M;gs$3j?fJY;;83Y zX}ceCQFJHHm(xzJ2Sg3ee)4qHxdC2RM-kj_vB-OHY(`n(bS^7-f#p_?7M{`sA9!A_ z%>Cxpj{Vl&z^F~Ywr@ZvIk}mq#no!%V;eb21A(Vtp^%GQC)+^Q z{O$!mwO7#*-P-P^QsZ^?VDd(9-*_4$zpB6GivhMY2uHNZ7Pso1FL7#n9~ndUUOX{v zm6Bz_fMxnqK&Y5lC8B#MeYEO@@#Y`fc6FxjwmPT+eMLZ8H9_45kI_}h(OQuG-&7n_ z+b`C6Oy+Qmk80Q7WzPgpFFm9jBhuXGqz44uX)LpD`_TrAlNd~=B5@T+(htRBGcvah zsgWn;J(3-rd*ucvXF{}4clQvCÃqYo(#ukw3+J=)Z;GtK&j%}*^vvt&IT!Jm6WuH`Iyp7c(g-e(%Wh_3ook@R6n z6#2_oail^%;8yefecV73Z&UEIMfz%+yq&mT0Iln^0Z?~+TUdW;(^1Tw&2iprAj^R?Ltm)*x|~ zYKBtEfB|DsVlw#NL|+xmiQN>e+sX{{5`~C`={gxUt1}g8HVSq( zC>9KXAIKsLfrTd5mM9jc*1_wnoN`u|I__h9sV)bvF_g+S|4*$)T6(|hT>Ab1a);oJ zLb@lve(1F_zg(J}z(W7J-N5mRf(YC0k?L0Q(Wdany(62gm7e)@n9$89UL+XS6q{OW zwycXAz8&Y3WAQbh!&q5kF49Nh(TwoZ7pd)oz>~I&O!vEQ_p|KA@qzxR7hE$B#={~0 z1Q(Vg!zP$L$FVbZra+Vk>sjlJkn0`a#m>mI8T-gF=B%r9PGXaCH>L$T34hR^v@}{1tK{^z=k%TBD`dL&GoOV9)08n zpgr;{wtxiz9jFcoxaB4rl~il}>R@V09tA}?1I<2I<2lVJxdNBzVkcenN1{5O|K<~* z(?Y`tPI`^%GDn3Xpf6zv!ocGH4W=9}75B5dyTZs`9xIKj#G3=W*`dN>+d_YOI)`km zYPcz}U}|8;1KMfJA+90b$?Z+T&0S=e*%RxD7!T${FN}uPyD)MrG2$At>Y8&gbu`N{ zO!lAQ@7d7Fy{{lJyYI?~2i$4w6sK~FP5!ky-uD!1YNL3aa3743?E7+0u^ie8NA_jd zt15pJ9Dv~~9_QF$hml4T>Og~mY?yL(p0WxHe{{b1QjTCBP~6s#8Vz#fbLxt)aL#yZi10*R%LDF(&%bk=F*lk8mY>S7 zDFPlog2PX<$@v|On~s%@;8JP=##7I_e9(2$e}Xn=4_-_gjh zJ<3eP<4xix5E|%zVNVQZv6=q~hwNi3z<&hA1M$DWuB0&~XDY)--HxCOfV>4{jFA(s zWWa3#xEXm|s0s{ewyl1JH9}?=PDW`Qu-9mT$bTgUBB34Z8XKms6#rfQVXW{th5}9b ze`U!P{$1VmBMAh-*NFwCO0Z7$Q&BofBsFA>N}3i88hDLB0ae6Apk>wpWfMdwp$^02 zAqZEB)}`;Yyd98E%=a<9>$_vB4kzJNE51-Hy z&gTGG*+Z_MtdNIDv(<<6*L8bNU7HbN^!GA7EQL;=g1a|1w6^~T#_IoIt77zpOURy> zC=Uq+jKcQ_%e((HBl;4n?E&RhZK7zt+&kOl$QxI(d%P85o!JC8#(P-;0i?ceJFp7E zovZLYfp4n4O9kuUmEmujS$wMZ4(qcyZhNejPIWh26eXs6@{#=eBen7%P-;X3Hs}F9 z0v_Z4zd!wdeSd013st3lxMl|);>E+d89XRFvDf49NF1Zw< z^L6GXeE59_TZI}K)+TJD$Hg4`1Ow#2lvkAg@({5Gc5lQA2F?N18V1c{f|!WBI7pL) zRbdw`E$xJi>Y3n#ywnrl=xV|5Fcn`F&IlDN#nHIf2J-NF-E$m<4R_#`f zyJ%X@`&dh9FJicJZa}(HlGVhJV9{VOUm6b|%DTU}KUt4AGn#iuKF=-%PYpHhAnBiN z+IIi~Ze6_ZZhYol?ze8yFf01DvwC)}_`>V1AM^u+MfCOLnnwSwFHc33<#Z9B5Veoa z*8qBDY`a8f@4c#=mZO>k9YqA+E9w}QWWVa#{E?k42HbU5z-tV;hf&m<%TV`*OA<1D zgqzHt-6VEf_vKB`w-g9`x_SH5=;O=;anl(2Wz;uMgC#>+zPf5ZzeO+FcP6-uHx}dQ zSl-IaZpzny*1a=)d>^$D6`|9;+1#|D|ZQVW0BhF2GK$ z*7e;S2O~!|^^FsuE9?*&zFh_t3m`k^tnu()YFAEM-ub{rF#4u;d1rldcUcuW7!zEw z8|+MfLoixfL$(SWI?`SGcoLqGLgdkL1mH+BdUkV~r(W0BN9(&Mcc;5vc^;(vdI0lh zwvNbO@;PlD!{OWO6CLwQ85>XInRl{Sv=#*%`aQ3%uVM5V$1R>?uivmHNF375Zh0;E zaA%sq{^C+TjM&PYm5jThFA+PyGGb34&AY~I=~6JyWGX(liH zzIFQ)Q(I+bfrRF=`z_~qea#vL`!Wz0tk>2=E9)OXH+I}rGuPab+_4F5%AkzDb<||o zn2$%Hi_Xhlg|o0e+}&2IcHDi?y`?VRJO>t07s#yxpVWVgW}(n*!PuL(IaK!;X{3MB zwhM;6X~F4VB}%m9MM}Fz{ZyK8xKeXm7h5D7HS-%urOfN+jiKVk=`@Q#T@GNvZMuHG zY|%h_k>}udeROwR+s~*+J-=fM!;So^{ky@zlajr~|LVkIoU7v9B)`XCy6UG|**QfM zF+Z>Rw>|A?{82VL{?jgDjoOy%wJj=2>OX9L7Ih)wyqcKlT>=lMZa%oZLW<4x<29*2 z6^?D>QHXM4Maq^XO&F3LL>uvu@1)h^i{`tCt+O|A3YXl{Po{R{b2aS z>n-U+AxehJqJ7L3%Rf{Yu~b=daoB)$edM?3^83ekqK4-4nk;I^=Khm8roPyi*u))E zq3=M?+mE$xRn~CDw$>HN#f&XRp{lRj?k*8Ht}aPTUuG7;^{ z0+>@_nf1hd4m(fzR#Tt_+UDV&Mh(*f@@^DKAt`d`H@apB=yS zhS}fUl+QXQXYAeKM4}4_F0Rkw~H4p_qi^S33rr4@vq8#kp8b>OX_x zs+{oMFIAU5#`$uIHzBe2$L>?#axIHD!sR-r3$eG~Q#%ee`&&{@>VJH`ya;Q^G72;= zp)F(IPWg_j$}ccCtg6Uq=|dFSLkga?PZ-Q25$p1aK0M5}*U4uE3zY4Kn z92;)*Cr^m}E2@c_mOPuei+xtAgB|S~tnTGo&ELt*Rqj4%x(dvp&kGge8=R;O-ky#@ z_X1m;G2V1HG2I_zF_w6;vnGrGxwhfS9o;D#HI&l5``!54{}z6KGX7EQ_3}R7e7MEY zkdVHpeNMQ=S%n^QOWaJiQ|bcZ=m*7+D{D-dsQOTUZe&w;bBJrd@V<2W{pI^lAhQ1Adf;~a?&m58S?79fq3W97^Rr0FN%;#FoyD^jHa6y2ZGHWRvE}AP9;mA) z+?ziDCOHng|6JHTtQx+0)s=~95SV0_(@|8)ex28`zl`9-Ik($~Z2bMkomA?bTwL=myKQKc$+yKot;DAmlOecyE~J$lexIZ2`(^XFG;wAb2>W#| zp0mwkuc1oxt7_3X$%GJz?lOKvb zn}RI}u_6o9OOC+L>jh8zN0hKoOXhFP=8;hL5kBij_||M6_u_*rhrtxHbB=bDPf{>W z&x=WWramsFxt-r9Uu;K8t-hG5eb==1dA19@qf^!zsrl^3g*amQshF07d^cDUuS3b3 zkK4$3SGp@RcuDd31Y-e-;(=kGycmCt0n({vd7=2%CaUiw6{7K{u8ae?+9P>1=SQ?h z$CU?a%S?t1$Oa(|pPG_Wbw9F53Z}13;MJi;=6CnDr!9tv$InxIw}e^Na8;%JV7>kU z41S+o8z8W%(PgtqRm|8-w5-c}%%Tmr1nRPJ^dm9Uoh{BJ>3&XPu*?gT{l?HQLT#IC z8{tun&aHP_te5m|r8`^_TQAYulpIpxUs1^MbB;zO4T-QsA(=mYWQO4^QgouR@qH^B z!$=|jc>)V1L;IhG28=AfsX-C0mOKG=k*fxi0}1rX4yavBJNq<|@+oiE>MY50FFX9{ zf9J19`f^jid-8kx$&*9w=TAuf(HB0{0T~e$Fc?M_a9Q*`ROOT~{zKpq%5b~*Ch}Vf zB5ftB&I?lmBo-TUd#ZhsT=$pT z_&Md+!;UI&iYW%)1@8Bk`OJW0xrZ}VG5GrOT|4kFsoDYu!@%qV@J^%qgOm$@A0haPQS+GC?Qvnt^>HC3{EQNKXuk;WW)HYJr3CJO0mnJO6#%Z5r`X*A zC2$HZ)s<(<)oMI^D<|OUcKQA+z6E}d`S7;|e(|Q|VU_aX*a%Q=8M;0`47mFI0B?tN zQ-Z->?v5WW4j(oi?p9qlTHvdP6nE`MbC?I!-D$ujC48~PcK{p}oUp~Ggc*EhBDdu# z>EY`ALpN{-BvHcez(6fvjM^%(o5`}ilkOHBc==xcsjB9$2dz1v=#~Jk>F{7PyY^t~ z|1ggKFn$3qq=gsW-|H#fsdmqQdnh!Y&bhlaN_U7ic|=ij)>a@J7;1rA2xN;j8f?NR zH3Ii)lep*$yl?9o0S8u3-I`MD4xZ^bxcWW{5R_qZUZ`8!RQewKUU&N5555fDyS=_D zwnKCtbUAdt?Kv%bKf=MOEYjDs$3B}OQEi84qWoi8oju>Vt%fz8`=iZg+_Tnz<>`Rz zP=5}2q%4j?nK8$8qL!gT(TUq5XEI1tN{pT3|0Tjk@_8^=pFxXm1Z6E_RlQsp z>q0LsxJh_%R*UUrP>oFDx(}wdz;--M!7fFouyzNJ9$H5c*mZ$#vOR7G?=U6H<@7i# zeK-sg(FFZ!-;+&u&H^Qc4Prm^1Rx0C-tYiLe zh#wY;?VRyv&+J{xrm!&7T36Bb=A0sO#scrtZH;}Dw*3LWKlkag9v8>0GXm{Bn;ta1 z-acK$s&(M7r9)XYO*8m&tzxMPBDsBPl(EJ`Y|~G*u&2yh48}>gdXm_OTe6Vto-1%F ze}_+VljWDmfdkPIF;Jx`fjusI+F)fFKBsa7)(DDeK!ct)OJB`Ou)fr{$rU>ZCGIQ$ z?-(A_2Zep6S;!H7^J*=F58980$d0*e;*bt&6o*NTaOkf)>4M%}A#R|OYIKR+O<*?75ZvCLy zu^U6tFxlwglh7Ymd7B5Wqq6syi%?1z>TSJfK>bCjw`=QEq;q`5G*+a|e#><2MQJ0u zcfJ>lqhMBbK&| zUtuYT4(;9&*rYkNQIYOtbk?M{QxwQL>(f};bzw{zyJds(Pv?UsN8+d!RI;lAO2xS6 zYit@FOsb!fNGOe~qLycgOe_`8nr$jpzp`~9+oN7{Ez#)U0jP1ll7ov@k{gv~`QdS$ zi{oCkksO`t<8C>C5;cC7^6FYVLDf}h8Z5CTa*t!hln9PZB&*Fas+{3=-)nfi^IDH; zBIiplr;pOQIQDplde1(%ZogT2NF+p+1@GV1Fq>w0z0L9~L9weW15~&LPE$L0s!k0R zl(>a}$9#o``8=ps-y>JvNa!F0pw(q<@3UkkZP&qZQocQFB`NDEtZVPdUk;|{96Wn1 zjy>@O^S~(x;_nn5l{_sU)tJ$JeitpCjx!$e{TV1!sEogQ`4p6JX*gql(3KKXD8t?; z=p;=!CVp`!4@m0hV%%eLR!aZk@I_!O8{jMTjHA!K>u^t@OM%Zdl9#jUpg#(5-ue9S zxs|P6x`?WCGLg0}ZG>H$=JSeo3PJnEWK5KdV$h5YN>?rm9TH8AmW(aj< zb>OU=ym){m{q>n}U+&A02UiUIM^^>Kt>V%$t>QEYS_#?oJF&3~GT&*CQpQWzrWe;t zt<%c4X6AD=Nf^yP$3~Zz;GRg##@$}aU46klai5)&FKwI7(jpU>5bh80VPj`LT>ao^ zm5^Vo&JCaQsWo**Gb$VI5T4pZV}6YIi<`>v1CO=yKPFWW!Y+m}+s{)%%drsgfgJUj5QqK9Uj7Hf!C3-I z?O)@lvtb$M^+Wq5ee>?31rD^^X^VeEK6g`sZFpa&b;KRFO7Ar#`8-?6YtA{S!KPx+epgy?dL(3#;gy2j}8) zj9fmNKp6m3n`{ou21bRRnxCoVt_dCf|~n?8*=MukvWNEG(7 zN2akFZegYbg_%+NuX;!sKJ}otfr;E})Y%KAaFcKv)axgva^PBD+pBje1kq)R>E@zz zVsuqgWr~3WqkdcJWZ9+A6wKCK;O2s#(=3~E>b7vqicoB*06gk>Dpinu7AZ8b&Ov~A<9<*T z5KmI_25H4${Q`L?X7;5&RfJu3^|mvU5t<}P52Z{GUyr6t4>FNZP(s<)1Ex0M8i7QD z$zz01f*<&U9OMKyHxiqlyO8`Ek;VINM(bzLbK6P5tl(Ok#o48Fg~?Z-5DY2(1X+DS z<)WIVAW}rxtSG|9lztdwOm2f{W{uw5mEhgX>QG{i?m(Knz=d}q_Q53IP_CcYrqFEI z#nkSSHAY4ha>@)wJPt8RTm7h&LjEHoR!^P$Bg6W*HZre$W*u7LqQC!?`<@Uq)1OOp z*+65W&g!bqB1u9to--OU@N6FOI5-(Xzk(ofBVnFnAx;}XDP2Q+q*a5uh756l65t|g z0cb7Ek|am-__ltfP4Ckl%h(jG=RWcxvqUx_p7Y?$@Fr*-#zT@qg^@vfksoHHK~FtD zbgMf^9{#AaPm7uHsEu-_NtSpZ9X!sL*&wv>!L#*mvB#CBkE66=I!<-kl7th>Esff6 zr4q{>yjx08ZmAAo_$EeDY*r|1W`eJ9wlHy{)XVp?OP8Modf;&?&+JRGp`6&(&}%hM z#L?x|iF5xHf*1=`iH!4!M5k_yCnvP_PA8@@WIp-m>!+!MJ&t&ocS^3HU*$Mm?Uent zEknzbj(Wayle7N8m=*PUc2 zf)a%79UU(_D7Ib!30+#))4!mbc!;ckUEvp*$pkl=qm!Cwa<5UGF0O&-KoCuv(#W@g&Pzq~no$w+_tY~!S!;`Y1=c9L-Q ztBS6`yXNcizH=VvhF%)9+#-d8F|GF&!2cs0D(q>1A%icdK?RVxuEqEA|vU?%*%kwosH-R7ZX1DY=Z!xMiPSS2ZrE%a679f-NGgn4%KO&^CgoD3FIg?93~F zeT2e(zKTe%`Hi?d_n?D}lB zR36U-s`pLLD*WW-Zo zAy`0^ODm~Hi_*q_X9t}aB7bF{U3+Mgy)^zIKO(1l*zZe(T~{CVEr`AJ z;U~;AtrL~(T6~k(7HD_IS(jlYK(!qNu3Dq4Mu=am*(;P-n<@K#9nFnn?}D4&w6|*+ zkID81b*b4$#kK8YGg;MjT2#BSc?hU$KQ7+3iOTaD;+(i=-P8w_wcBEWe!A@5pT6WY zh7OD?anMEno8u2UP$y}x+G-^BP})R45#fjUq1UOI3RN7~(+?>DKgea2xGfp%<*>$; zKyP|_;6w|1e89Ght~7nZ@X-N+|EDL@3@mNX(VD5r`*C?2<{q6;zkeL_b7}uo(&cos z1lZ%2uhkvx@qz}8JG;OdaUNa4u494Nxa6I~dz|U3&lm0u>vb)3d9z?XgwA}v zxpP?*pmV0Yn%~2W+>T64DDxzu1TAax;b)duDtuZ*2XMb}DC7=qbJDh&K70ciye)%1 z`&2=)#=%oqH95rZQw1%`wNJyEZXsxAzF>!#B0J!QoFe;Cp=?W@oY!kT+@N+0)i=obBfKS`eQ94W!$!Bhv(VzDUd#@dpt#C~*bERm3--2iN%UZ+MwvpehTf z(o<6!@1aOG54p?X3{j4tNLB>bptfBjh+>7fQs35J%=>b9*cO-ncn2V%PZSA$4$hGj z_$hRLaXVW64)lBb52Yk2L6R{yVllOXRTSDNfg6|N4bYvmv9#kAX+Q)=4&ZPp^qgOQ9U3ji0(kL?pD4k3Cd-XOfMm zYb_5>&!Nnm%D{KFFCcM@>#KF}=6=}v{Vs%uqd+VdH67_uN6Lc`DM9~^qyH1Q(Kz#+ z0k2K=aU2l^(fJkZ>fG2@vSvG0n|$|&J_ z9$u64N(f_E!az&SZP3l4!HHAL@>tGp=qwvTW3RX5$kHa-bL#_AY62P%bd?qt6>{Ak zVv1+qPynkH{{kumu1A9aA=vqMKX7N17f9lw3L6p;`KbFigMB;SQV8SsrgRFIbxoteJMECQt_jS%lEXXi}%kl3rDz1nyV zWX8b)6?A280E}TahDy~q%yVI>t7#UhJpAL8X@>583fR^8ce;Y~eSnUWa^OO@7uiOM z@+af1=Kn_5dxkX?ZC#@Y1PD!Pl%_Q4qM(5ErU(d1Zwg3JdKKwqN1A{Lhy_GS0Hs&y zf;4GLFVZ3%L203e62QCSIq!Gh?>^7{lSoXmv)7($&N0UrGtuml8tK934pwuxgBrP} zI(B@T%2kwqsGtBgCu0Wh+wkCoQSQXDQWaigyF&>#R`&jVH)mVUv zosZ?NjDR+?Z-inzqt3OWqQ#Z^-J4Dbq@38nzVd9OBSvXPCgPyi0ju72gV-z8>=yVL zv`KIme4+z=brd~-TpylRJ?DAIK0*orTmm(Sb-ioFa@LCgyP01TW&{aus5z(r8LxAX zvqylN?=oYHM{77e<|0=&+XG`7PS{VA#VQeGf@49uc24@Lfj57 zNjJW63OtmZzQP~nTtWz(sVmV6=+|HvYB+c8^80}&s?}AiggQe$aI8 zT4X#W*dLGT8f(y;iRqa}Z3~z${#$#y8vQHaGUmF^+^?Y1#IXv2Ae^B#TnN0RZCdeh z`3=e%JGyIL2@*df+0@O8B(ObJp^pz+KX7y9dcnn!JyCr!!5xG&3?$po z66=!l8!qN-j|(;#WNwQkCX=MqI?BQCenjKg-61xlWSF@@Z$wHv#85k_bIuk@%ZqZ1 zYu9lo-GBMibAt!Dw;XW#_-96>&nMT;N+m$3d_EbA>8$dkEsS#9=!N)#t9|}lpiwdR zI&|k8BN&_>NT+gD=bk98og^-3^#4G%rUYvC^HQo-Pj#Q~9|AD*=dau1!pOs;66c@q zg;Z?=bUJrCq<=H0vhnAzzKnuE3t`V*|Mzaw27e1%)R05$M=z?Ru^P3eS`jz$Yv@5fQ+^$J^iA(5bSz zjBI7&;N)Kn19Zlg?UTPR-7F@9UsyjjEjbmyb;iocuUV|=e9GDFC^?CFmB8hu@@JUI z0RpVjXl{yt#J)4Yc7IziNy)1P`{MkURR-kNT~~IB7I?0xgxg_D7GAUQx?qFl$$x&A z5?Bi(c-}R8O_y3$YOPH+Cr)-p)Oc|e&#?cyrk7KYrA+`g#i`aN?kZQh&-M7G5nMIp zbWCH%Q2#;OQ@WDV$8fwl{TRnv>h*|nXn}Pj(;6@-x0i0DyAH_OsMBZqpYHnKe!*ak zooZygdp@wX(L~^$($u5sO)MHJV zmI2ZE%qfaXbw@jGj9c>7O>V4|lQP{` zZ6rGH{&i+{55+{!jv3kxk10`LDQ2z zd%lPw26^Y6fnaO(FVHOqLog7W1hx)C`U?gFm9)Q$moj!N*MCrdCj%kgzpYMxU+jvt z-EFUIo)WWOIcW-!`IO#U@Z|ut@SHl=BsSjGYWuqC(jh5cfUBqV5W#nBg`=FMAXb`% zJM?3QkSoQ)J^HcN4DOC@h96Wf&T|w+4Jf-^v&Lc~i2(T?9|R8Wlm*(CNBZih78W&Z z37)jOWYoq)!G8U9U?Mgw!LHu*Eq5=0=Kmcbf59Oxp+wTxD^%>awtN%8CIE zm%+tR&bK~x0n)}v%!gS8D|QQ|!l|o3j|hGtlZ%WKTB_zj@q~lsh2PGj`VK@t7E41; z1fB^kx`7}EmxoalY=J;rVpJKBN~u7A*Iq`3Hs+)jTO(2;oJ}y(y5s&Eq{Fou-bJ0!O85K&YkfC?#8j`a*<|7Q zXGxEHmzyFdAaQl)qT;K4w%X?XP0*FFlJyrk3p7lMOk+hMr_H8hbdJ2$RE%M?dcXW|a_3yKE&ew5%V z&1)6spC4Z3IgLs2q5Es>ZjCi2xOdQxy+rdLOAZwIa%LR4oUSCVO(*Rt#W(7##Z#)$ zkGY&W^R?yiluQJ_dyro2G8Gz0={&v6<4csB{MBr*kBegzdI5PhcBxTYdF z7}oKO()qEuh`wW`-q$w5a4u~ZncBEJ0L61#Lh3^M1s$Ey1LlNJ4lfuO#=5=V2roue10KO$Ru}q6RtS=1Nr>C|lX0&Z`KU!BTd%X=(AxvM1N& z*ZLKDGd9OCN}*+TZtS}Prmz$_Xe7;WVgJ*iC*{b&my<8+^wsNoo5MzVUjl={c-Pw$ zl~1mq2A;I&{Qz0SVErd*^(jxupC%C%1>FyczK<1jZ#rx&u!<5F`d>at02Ko-8Jo`~ zpM#meF~~XgP40&@z`WjqMX4u~ftWq-)R+8D1jTRS=p|y3ABu90vp1@U-m3ynP=EV@ zcn^Nt8PGmF5;8srYwY&XJqEmrB~VxzBjr)yoy;pwxj5wVtXsvYswwq_<})MBd3Cs_ z<4y^vj^8rEmmEl*o`QVr>L(E&&s8F1yZD#`*?K~`dY7iRtCoYxBR-5Vn}9?-&E5o-14K5)joJ*gBK?Z^NQXOLbQ-^{m81KGv#t66@;1hJC;v3GJzF4m8!>G7eFegx$CBI4EWZ#4t#BRb1S(0sP z;wuwEp9-A`T!|~PQEvQR9(Vyiz$x5kc8k&~W{y!;OiZncdaaC;q_#C(C^tk*EJDdW z9+DA+33E}9DHnp9=JXrjkkb*dj4*Y2R7KJG7MQU`MV$}KVIifr3RhvfP9~6=jlf84 z$MT|uVl3R$UBxg`kJnDMmF$eC@Cg?W3rJ1BA!n)TpQLq!Jrz<#^)9qDGh6pmfX}6R zfHwNFEaP0-T~gTboeOp^f{NS$1&uJm&81`JL)Eqt>r%aeRacH=8(T^m8*(phFM|yq;+<>R>rY zw|-YKF*0|y?=;CgP_4rK_GZ+V)<-xhG}Z2g;h;0mJ@A0#Zuv5ew)n)9kX4K>?2{3V z`QUTDgBUn?L#)QKJmg{<+OyNyM}{FmPbh;A#SnBVuwYC^rtLW?a3znHJP)1z?8M5L z1~!dqMg_QI&_etKIx_Hv3xZZL-xLe_d|JJ$vBof{ShfA(1NNftg?wb@gEgg&RUcqN zL-!2fpM;CmP?+@GHy=qBEp){&8rsf-0dX8Xja2tfKqzSG8UNEVum6~#n$c$r(+e$24%b9T`lqI^!0gH-Z*SjZ9- z6DT!CWfkN3^KCI>Gb-3&hl;oWzpO+YPY&(KG+ypIkt7)Xk=KLoY`8oSf!!mEDZ`Sh zjpIK$&~e@Oj<@O>yo?sQC8o?yW2qJh>6>owGmEt&GakMnDf!LEYs5*W`|=CnS`0&$ z6^hhA+vgHhGS6}ID-^gI)xqE)lbzU6zt2I67*7aPa=zKfr0W^P%p zqb1KtF0w?4wJ#<~g9TrTU$cPgKAlbz**z>F$w^M-27y)n22Mt55KfX%4B1%4Y-vdn zuWVLnh|y>b!l)^IV>+GjK}{q0p12JU4h(GEIk4{VY|JoBSa#F)Z2f*B^UTW4%0amB z#zG)t81s2;l+}-w>vdVGFs0;)rt7yk%aj(Rm}#{2l5i)#C@QbG<25Z{CcEhmusiO{ zy7V6H_%C1*ZFW>~QHmKt=$2n`eQRMh2)|dA^oz2-)z}-YFw;FP#r|{W%s_ph#i;lF z@%r<#NW4`uL+UL`VY`>LZa(%Ggz%c|q*mtQ9_?N69DFoCh3lE(v%=wc+xkAAt%x_z z_9=7lK9dJIo~QR#YmizWw1Gf2JY$qyiofc4XYac8oX8+3EP>GO9N*>-OBL;fu;vHr zsBno*J})2}9oT&4DUmsGl{qFU1&t5!HfQUS)jy`P(Iz*_v5}9Kpv*Y7cJjXCusa>- z+)&FM&?_}E=Yp1`k-PwT$ky0Xf?TF^KxB@$)SeCB5rEPx8T!aJ_eODl+OC|0ynofd zA{qkiaXD;ux8DeR5ZzeN#2ND-`iyZHAk_S#KbG19TEWWulre`V$Bb|?S!b*{pAxb! z-1Z)DBgc9`X#$Ro-~n7>d+Bv*z}|?X+9a}%vTr5CFoc4xE=BQuCLMri7RMImyH#98 z-wv~p6Xc*x--dU@fpa>T&*4c`g8n~DD!%F@>XJ=v2i1Egqk-9^345>2>bt9bHF-wh zm1Dd06D>g3lbaX=s0%Lv@!bQ|-|cis&@)z_ef1$xy@jGeW|iA^5Ai_zT)3o64WJ4z zk%Fp<&83#akLdTluca``kIi5t7O8?oWU`P!oGwpilRl~MwvJWVn&(Q7tL`olnIN99 zZa{1s0!7Rw#qly=h;;uWh#e;$_B-6NdrGvm6mhixwwS-?Dv{O1(fA1i73I#~4U(ff z^h2{I4PPh88t2d3@gIcl{r_;5UDcG(e9DCEO@<*%>2gXrqbe40C;@(@IWx+!V}qV} zTCzlU$Y~nKCRlWMQ(9)n@?>D7899KjcCtj4CY5o~U*)BaSHy|=Kaow^tjnv6r^qp* zVx@^ftF^ky`Noj}EU}DkJ4KZN?@d_jJy89~qnKm;PhK0=P707f&={`osGf{jYnpmp z-qQLAxX%Bjtl6H5ZAr7BC?x=;66!kkT*l1`4r9no0{x($#@f#(D9_S;w1m#Lv|-S!mtB7 zh{h7udVu`E9sounm-}_C6;a@Phh%Ru;w7m;__IW?ed-&1+n*FIiMRz9NE(nt6w!{B z$X3-}?o96+#r^t}6fK2dhf1)<1;0#(>YBJhsvFa*&-kCkZUq5O$7RbO(j2drZ2ZMd zNx*dY241v&Fm~V;bx|>gU|r!=KhJ%d&Ii<=Y}2YskM1C+!^;O|07)8zL1f9l4N`xAqXu~y&-XVe>BTx90tIu zofG!_s&~Pc{V2=4E%4{W^M9I@O?8AY`3XZ?zo@#}ccR~=!n`^}Brxci9x$cojn4<> zCD!JYR6j-ojdpY~pcpw({d3Eb7F@Y*lshirzYLo}?4aX$T82;BwiJ@(t^8PKK(Rr9 zV@pb)9=MxV=0Dw->mQ&4WUCNG*{!D+L(X7L&P-4w*4p_2p+rLsx9ESLap*N)BPB28 z#9J>F#%&c#UQHlf*a}m=5OSJN;d!C+E-s%Z=ig0qHoez<#<5sdh4^@$BC`d#5wL)D z_}i+AUH^orcSoOV_oSLY!EK#$O-%fZ}+j_Q=c6p zY8=ZshX%R+1sd&0I2Pb{(|mqTpbVCW$Gj#QhK8UN9pIwrH;XBwd%Pyt+IW``py{Vw zaf>1De3Y|_^sNfO>6v#my1CU)pRQr|Jx21l!-AC9M0)qLO-hYIUkhy=E}!(QYBf@* zb{v0gTdv!`R(j>|0u$#B2UCX53|(`~DFQqC^X|pr)1u#D`%GR}4nsy++4wiY_6>YE z{UONVf}+*DqMy>c{Y2cek8`B_Ic78cwZV(Qu}#h(0iTAD=sF^{Sb~)#^Fa5wvwZR) zbNeY*iN8{sAUJ_`(5>(kJ!MJjxLXOcF{H=0>^nqkKV`y8E)u(#8B!xB?KF=ypvwGf z5kUoc%9ZK`GO&l+vN&y<B&FQh}Q{$44m-F{e)fUE<4C>%|Pm`m*j7uAcsqq31x+x3Go6q$peo2F}qgnKvdz8f7RQAD0q2D&3# zas}v{tlXH}B(MbQ(fGwwrtlM~AD0r8=1PO(k780+|EUZKc9e=`?k&}SM-_GV?y{E# zFSHEXIr8<0?uWuXfdjEa_2O!_3hbw|3oi6=|yal{e z0zod&#E*i*WJAD;3@P5&dwCXb+j1$&vD)X?Y`#QjZBBJRoe+`g2&n1j5aI-_nUBRn zagZqJ`zDg9{@dhn-2$&BWHvExU65Pl;yYWXF-?(og(2G%UE?!DFzLg|E2_MD?)Y0s zTQ#PPTq-m)VP@q=wQTO@eSyUqD4-?zswZdVYNxTJCrCcU!6dp)$-1W)SE6Gx17-+> zz)ogx#3)jh;knfsi9++dPQt}6Yz6|V6~BJkwR&#eO?&>Sm-0u#k!4R^6x$Hxj{={3 zz1^qa^1H4yxJl;R&BJHiqA%D28l*%Lh7OS_Lme!N?0q4f6NoS8ynhd$_1G-}9A~{bl`qP96#r*6e(@go*W_M){fL{vnmNy!0Q(RJbs{q`R=d{jOg+X%l7Z4o56#Zox(! zVB;@=Ca}4skIb*l$x?wcUB0!s*T49aYe(AjF)ihXrGWEY`={?>NCh}3@>s7KJoS&G z>^GAf^HcHDz5yMOfBBT5e(*@-=d0^PH`6ZrqjXW1!RxjKzueCnRosCXdHv7# zotZt_fUxA8CWVm@%OUWD))ae|U*MrKSEw`7eSp19@-%(Jfb2Q(72A981t6au$xVM? z_+S(M5PK1bpJR+cTtJyhySrI+vB)1ExJ~{Ah-mh*uZeG_s8P-f9GO!NnQjB@;A(-m zUsE=x20vXC#6`JGa`3t7enj~-x3A7h_7BviFxQdJ`mvGh&6thwz-S8Yesg zMCEHm;8*6siTDnIM}d$G2Sg;u=K!v`b^{5G&^$BT9)JPpu+tDYmR91~RD^FKfl}&x zWtOylo)wSQ9OG;T(%J_*9DYiu!8;c!5Cx}DUsOA%=IVg%6W@KtW;5zd=aG(qnO-l zHrFQ?`(ItTT6BzFZJeUcSO`!ZK)oa)wF|?Ju~}gM$Jzm$wg^1BGUqho!bESm#{iO^ z_i8Ob)$`C=DiJBAPy;w**!>R(#Q*7cRJD6Vr0t{pK)%YM{HOBXfoA^sicgoW9p0e_ zX5Mwr^+X$q#Ge_#vi9r4(nJx983Vj{Om_A};8#lp5ZZqL+9(U>4L$!!q-c{=cRq^Ja7Ur=}-SnaXS{yY72tD08o~{0cAO+mVZsBuu+9>K{gRs8p>Szb4;hfxe~a5 zyUO|j=thX{s?mwbt3UH2fw1g&H04S(AZ@+odI6xqAILYYWl|rQK2GkJRlf%H`-Gno z#BKvnJX5`5%1XW5L_qAOOiXkrDlAi9|DDO7-lZ&O`+#mwmLAyi%$e|efN2xQf(yiA z6iy&b32|m|B>AR@e5n3n=2L|8IkmjB24jE^PSWL_)al*qS4da-d#Zzdq*yk-eHAx? z+9oNp(|}YpqzrYqI*<2V;JE-IBWH#|9RvYWwlD!$Hg=J4V6sSQ@F8wQz<}aa`T)r} zhIu!dCjHn7SUV_xkO3=+^ES|w39`j>t#@ocDhAT{hfUwWKZ(2&mGO#DKb8l?tZye@ zHmz0O5l@%x*E^YA+5jl*VB+)4@rdQy(f{P7TS>(G>h)Y=F2c7|e0oLvyU|Tub_Ik^ zkoHM>l(FT1)7i3R`a5D|ML8d*M?EVd#-gyA%@lasu(F(~?>WSD?G(SHWBwe7Fw)Q;v>^lzan9xBg`fkV~B}YIcqJ zYx89S0mA`c!5ESfpyvAC{Wq6!{%m0Ja!B zFzL!DV+&7ZYJ((fD2#Ie`1S$50AT+<1+b@#{PA7z0-|f0G>>TP6h9Z~nn1m9=IV%` zjVJwz_hh$*&3ZWU8=KlO4Rq6{gy<_ZEH^I%TIix=1h72>+JknYQauTnC%jaMZ1Eon z9j%@s4mr?F_Vv|8B7uTGmui#mOMn*W{K@U9uUGOVTJCBu)=M@^tcnr~Ri(nV9Mvj8 z-`x*)gMN6eaO!LIPC5ck+z^f;_g88(P;zA^cXWDSl7LXTYF$k2i_xjlb&PP zSi*poA*t#nLI=uKs&c)=R;LfmJ3N>TtC*y9#Y9in*?B)nxP4X`0+S&lz$+$YiUS#Y zSqZwH`-6JrJ=a=I{!;iPdl%};hZv}siEX&(Ww>Muh0hJF@!6)ig?GC1KiuvMg~UI* zqqD%Lu42BhFDyT7)nKN-56W!)t0y9fS z_Yr=F?FuEe4g3kgf)#8{$q*gHWKNXh<)(NNViR(FnQ0fW`7->#DKPM1oVfAD3yAyd z4a0w6-cRG?u0Y?ue3w82$jH-T`{6kWzB@j83s7(82u>+~|I5d%x|6<4=vmwQ*^4bK z#rr7tl~>>}%L6xtT2+ZorW-}pp{QtA+t582sI*6)r+p_8LahrGAMPaZaEt*nv{Q#e zcH}%p{rJYbQGTM;W!*L8{MM51nK>{p!q!w5DXDF~;Csf?{923bZK435YW6p%PbO2G zHswi#50BX2a6dUbWEPuK_?d5R97MF~!dVXpAA~up@%g3DMD?9*`(w#bWx1B>BE4`) z_C@^U!qF6>*nGj!;N0mXyKI)_7~xBxlfembZ7@ z)$%&RN>Q19Vd6$N9rQulRs9Pj@1=|jTdCB&SJSBf$hv4sm(2XY^pFXtdi6iHZnCdS zDCtZJ_nIsIa`jxQ$7PPrOXuQj-%|gH@zRt&_vscxUxdqho>Xe0alGLX&|5syIt>{z zW$dB41Y3c7L}90oEZ#4!Mz(lMx}SDis-oajdhQfs7fZq+Ox5aH_UnirS5;^)%<;{`21EO_7F+IcCQvO;TlBkvG)x zl-5VPwhVuNjsW5-mMFg3?Ohkf%7E|0{6%!F$)({Ep54EI67OBY=_##e%zeA4X}*A) zt$EDgJ^;Gbea3Xgq;Qw|B)MsteB|NmWs?T*cKt=>>MsdKY~I{-_CZaljzLz~IleD@1gErf?8VY4q8k@8&uOEZsNy{^R># zek^wr>4Yfvqh_Vq12r+0CNf1Z%JG(z%{mH%H80l>Kj5tJispLA-e(q?K5?FyPgJqLngrW;r#{> zL6$p0fcTRYjv@p|z5uE`{}RNcfpL18rDTLb5{jq=|zF`}HN21kjTlcl=9QJ&N> z77ta}RLmeF=Ar$J!zU1`6WnM(NeUm)^;i z-f)VIs-4bI^7&RP1+0zU>VQ=&kyCm_^mJ5Y+|>5ssPLH#Y{-pGI~^08MySxX$8n)9 zarH``L1ik9P1P6-FHJb_mbS_3;nF)u0VKXO^Q)=|18G>}HZC4}5+FU^K{Zz=CfWUvIF^|H1zTgq|AMPzVl7MU6EJF28olWK zZDM=lYn!B2f8ryE+|A_z+18E1eHE5+A4m@&$t)L&ab1_m9W|?VrQcNvv|Nr(dJ`;$ zJWAO%q~|aIJ{YStFd!GJ_vuao6@!lCqU9~~Wk0!n#mDs7CRJ2gDR=XffO&}ZLN90x zu|D{hVbb&n!mCj^yq1OB*`3lCI2}C}&PUGA5T|#x@Md*eQQ5$2k2jpT)}xbz*Fu2b zz+!kf<32O#{Ql%FgC5RrvA-i~WcSpXaV(z>m|%<>>`UI8Lb#tl#?IA z2oSp?z{>yk<^%Amg@xcy_$ zub}w8=P8BZ_ODm`FWvn9x@_svpnnWtP9nbA@0~xN2{?ml=)*x5D(pVP*qZCk%Lap- zHc4M>5HLmTdplBVJbKSnVut;$0;b!8W9HDP9yka|$ew2k#8{j^QwW9%~} zw(bk0EA78htS7GY0=$qIV{5Jp1w^yB)WJRa61nbl;KD3%?|uisQG8g8*m7^}!4$(!dFRnBkWAWakrw{Y^Km*o3`H zGSkT(vFTcI&io~HlXN$($ZWW;+fR)}S42n@Ut##gd<`>S0(2Q}{M>r#gKB#RqFu?`QKVls~Qm639?}a7+n$H>%@Z=7z`tE4rG}`HXVx`iR)pmf0kC6>(jP*2T=hg)1=vzPj3t=KpYFBtqV2 zr0GJsOkJM65@1TGSbMQ&b=s=s-Prd~-OKWjOzDke z-OD3|;m`dqX3DY=Y;%X!7f=1%U)N7k?)WVVqkC1}!3~0NZq-UgTD7QqPj$AK>v3Zy zE;nF?YnTH|`uPwST)~=AWq%}|lZM%&eOqB}7tJSM0SpUq&;sFM=a0C*9R?m$2{!q2 z?-a=f3W`tsJg5t0o73IbSt`!4kqJwC){lBnnzvYDIO;nEOJ$T0 zV&Fd)F|eH4x44Ph`oQ|&`%hNK?l&w9w}|{aS4foRmkG>c-;L8M(lc;Z1Lh8GVNn)v z^R32??|M9FA-~(A*U%@*?d;Jtx=+xM0w)aR`cNrpZI05HEboOaCC*iFQ>f&+(q*?B zFelqlua(ZWg2H%;o8MrwQ04GYwd8Q31)}w0YBA7zU#7|c!v)#F zO1e=b9FJcxny~|-yk2WY5j*Zwcs8bSQx>;58cveKVxWgFf#tC1kx)V8IesR?YNnC_ z=^{78&NXy5GglnmfZ^1yJgl>%R6gmdNP(3&3|syBkqGmP}z^^VPB|$ z$s>+Sn8hmOVd2V;A8fP=f83Vxmj$?fx$(wQm6!o z;vSkYB0x}|zYVX1ggf7mjC--Dz=fs7)uVxs-NOllafEqw%u|u0HWCGUa0Xq?^)woA z-Y!^itDrSnp;O}_dU}fc-*wH3bLfweCAoZ`4=pl^%T6deYXn0jRIS!8FP?vBL1?8u z;zn0(8Al2S^ffc%l%u!kn^CS9pFuC+WS|m&-Gj&uxnX#Y$GWiH%YukJFZnpu6;eaMW~5sou+Mu+Z}!Q7 z`6JlTW6lAH^}H;~z@6f5b}xcxuLy(xJ9NrX8vms2!v%~9O#cHgKRh%lStm)JheWj+ zz(+17X`k-o5Z+U46)+)(3!mmYvQHEQCsPxBFx#;^*G`hnB%c@BUZVY^3UkhO|C;&2 z)=T^abEx!9rlsYI{a+la@4oUM3k~%NP_kng@U&ajfmER#}_S=R?HEXAmHkVE(0D3 zGA^Q@=d(V;R!WVBBqlG$ zT;@Fxlo%sSlpNGmd)drcS|i$-lkC6CQpOq~#iGmZ7`#VZma4nyq^8cujGuJmB`iv> zI#;q`RWCcuVFucFf1?hVR~N@T$g~Hc1oA>e-tV@b{}M&b$L2HoaQzQnoMiu3rYK>V z1z#(meOLd6m{o{&`V~qz1w@Gdd=PZ{L@=%FNtyW;dm{LBJ2Rf&FEkC5pfljL*mB^B z5i~0|#&PZ1q8}BQjy-wn8F27KmtL9uyfQmhyS%(Eq;Iw#j>#f*341E?bG`d~lVKq` zBk7<`|LsBA6S6$cN6&M~yN{;Rw#S-&;!=ECb+|Zj7HotsOApvspyc@?Z19X~OEct{ z*G-r{c4+89i%hOhbW-bwAgy8u!Gpz56Yr*xakVp!c~D`DOb8dJ{3=ahYlq$+y`5ZanZEbsJerwCjIpKQ>L)1?aZa)2!glxwPM& zaf~q3c*j0BMLI2>VZ{G*eELj`zeh$DH(DsbEHq^83oT2F?Qy>Rk`DO;+}@>!sQ1rZ zwNc}Aib4Dp3%B~RMp*A(sE`CHw=1|v#=`RX0z=}gPn87;?UIxCTtG8hsDqWM#H+dee-)}X!u;V4Qv|L0B zTwXm>^E=U02RP2D=)fRFJ@^_$k#DIPbf+PwF=cOo>f@Cc&tN`h8(;rYINJg&L8vdL zOSO#6%-N<(<0v#UC{6!kwM!>j?e6iw;${`tRidVx|GAp<9ySY;mux1&6^IFnqQaNV zLk)ZEA|FbUz@r`wb3on9f{lAc`GAv5)}!%2c#Xcrw&-bvK-GAQ0Z!VHA}cF`%9Xbm z-Dc*-MmD1Bus!f^8}&9NHR*T;XZ-m;;Sq4*^gT~mYiqRe8^ z9z2axMFgfUGjwg2B)OHknRNSAH%N}v58WyDj~B0oQNc~5{CLt~LZiugR0&4T0mG`m z?R5tSK}hB4_G7MDTQ_QJT|woSraN`<%Q8azW`*dqq=QAWg-l?&D)=RZ5Q{jcwdVil zB+ps#-RAj4SatTY(xduyYd5!Syf{T6IjnujOH_Dt4xbvf>Rht90UL;fnSY|5_1-&=xP`1Lu^K%ECuts-!CR;p7>tgUcz z0I%m7)xU#CzhKl&t*Di?_uN}=ID28In~tDKv{0sWQIY4cu)g61#bWpA_m`k>+=^P# zUMa#YZ<6%)k`@&?isVeO&8$5PZ_6_3 z0~~1!EieK+CeZW^VUVuBY`Nwy+ufKm-?ia~p79byi<}5QIN3GzX?53Ml>%vf#WxE{ zOtsdYkz{0@4P4Cmf$_KsuBcSt5G9r#hPn?K7d=-{k38`^dor_Nvs~S#Vc3kqH}sR* zToeXI$_v8^8RBPhrKu9;qgH(Ybo7qjyA5AE{MmbFS6FO3EnC4c3DV05TBR0MWz^a1(3*mUXZJRLYI&Z74b+TbRqjCtp8D z1V!xv$49h?eBM6;Wg=6Njn&C-HS)l|X4F*lgfP6z#J>l7GTY6c6%4C%5`4Vomff&) zOb>SG!$l6}S%bCb3M)}mV58smtG*308E5C!p;-9yj0E`o*5501+%@hEXynA_ko9rG z7sr9Q5+B2OD;fsn%nDWY!0@EZ>g8Jgy5g{1d6?n2oDyABp$CAAZ2MJI;Is;(M#xG3 z0~UJ<6fe;8kz#zG@hs0W49Td~!*XVA%e^iI4Uy(ZL%y zExR!P2Pu|~VLYlX!i2VCv|*K0#=#&A#g$kvzTChB%y5&8w1=*2Wu<~Gb{3|~MA~H* z7*CS0bDX{&6UtNL=~XVFhKyu30Y2hqXXl9@@yt>!#0YX*2{E^oAez&^BB^v+qUphQ z13Lp$KYEV|kkx)OQSYX<6gtqA`LFTggq33?LO~&9;iD;AW{IX5sMl2k2k(gqW*tmt zUjHSjvrM#PmYq|u7A=4YeKML^9`&cFOKRKEQLPAaQ@uQS5vX*IGiDpE3I%2}#Fiwl95K{50Do)7cikKJcpe^f(wm@a8< z{s-rcFuxap^R5xGuyWso{Wb6>8fMSb$04&V!0CmcLtAo9&(&kdh=x-ImdE{MVru2j z*)Py%+|>nm=utk*40_{KPqI|lTe8(6e~t(fCp+a$R`Bf4p6Qg(kQg2t3`;c^SYNJe zK~HL2>+9dMwfk|Yq`F+93q;yr&D=nTRDqzND!0}T0kr%Q0l8uxi~y$8+MmSS_v0pr z#=>ZlS{r>P&^P$`mauq<5^!aMU zZEy?-R1JAMThNSzV!habU-|8_8OSLu>)@i~AUkWn5pC38?4eMAFf$PE>Wz}Vu>+o#$UH(3ewJ<}NZax4kEP19qAx6KKHx?4JTu&~0&x&g3rc#BIza)9Oj`=SimmU8YDp`{tM zV83k|%nV_qta=2N`PAQ~4giDgx6(NP0FSxSiWxCkOkVwD9uXFQNaQp?j_(U*22pw& zMCpx-ROspUS{q=pkNKwQge32Y|F*-&J!|#1+%Tg*Np$-0wPsKEElUpIsy@I;Yenxf z3xNc>V%2&oOLoy_-GR)b(on5HJp7#FO?nRlWaFQlx1v~8ob1Z$vN-mvP zu!4@fO3ZoI>H5u*8!FAg-qm7(Dla$%&Neff5ZYWtfRNasQ%hxKYxx$R$SVRG>o3^X z?Z#lFV9yDa7I+!0J|EEd;1hHcN2M#Cw}Yfoj^P09ypeC*P0-og0~2hS*+gI%L)5P>~fcR^hFO+gyt!xCR2jl)06zZzsT z*{4Lp8DB5TeUp7brz&{&aWvqvf5tP=6xBDiJJyk2|U=?hnl`Cj)`4yC`POZ?> z3dCDpBo%l{voKtYF>{$jxAF?%W3jT;$kOjkoKQ{T5-QRfliKMCeI=WTzPCOYd z|IZguaYHE7M$YEOx`iO@5xGWrx;UE5qx~?L`OA;3oElIb0v z?%A^z`gUMQU=C{_gsh!EP{iCd23G35;DhvlK43L#=tg(S$6Ey|<93V`Y!eY>sdb!F z1^egUydZcg3_rBci7QjP)Wa5_F9ZXn(* z*AuehU0U4L=3{A`+#_aEW0!9xGy?^>i66JD&h#NN@xI}EE3Q^oGhXovv8*Wg`l$WM+XyhK>F3&@NKv6_sAR&6>AqJ>Pd9_4N!n)@t4vCY4uth$@q?Zp%9>CtP!lq zS?8`Aiix!kHTlvQi-Qvw*pcNCw|8BKsD#77dy>iQ161sC;$@CW+Ok3LK)!!pOWvd; zt)yaJW!b4rG#lGt%NV0^&Jc(=N~-ZPcXj^jq7RrbgPtPL?AYeN{Z~1E`N#Qy{Bo$C z|5%jaKb7)c#PlOTOQi^cCd-Zk6gGWP6DN33PiI@A4H3W;Yo~i6z~@QO1Ax!I7zX$k z8gL?z*B%49fqGD}&;#p2#s#~@V_MZe8cldek&hONtOMgGVrqg9iKky7nF=dm$(Ygt zt?Qn={cBhrnmBDl28fq68AD>H4R8jS&Y)3-8-)K-uZ~fPK!>Gs+L9%R{Pf)KPg_dy zyX#}QDzgekby#k^caDbT_!TokUd6BsqPMUyxY+co1+TN$$40x8TK>ShfVJoaC_~4y z=3@&FKvK0?q7+w3vOtGIY3Kx+)BP|oj#Bp)sjScsCS$fQ$8wRfwG`Fbd+(>ez`#mv z?(_5J5i4_&-&iD|@CN$`USwb7lxOI#ze>l>Ipsd31QbckLQtD zHpWD@KoFL{OjVo3`5oXXG*yovxr0$0BU#z9sTKfpUX||Mf^X^9aZAs18ki55`Cfl~ z%?ThG!n=j= z&;&A36wr|xT1D8Rjjd7OB6i;H1>EA`g}V)0lLGaW06RoVtvdrUXV0Rb7$6rgBbA>W z=9pGn{B<4Nx?Y(z2y;zq->9i)dMVv3WuUB7ZT5%=yt_EG8b00z&4%R{H!N(zgs_-u zEq6=w+X)LS0HBuXr;NN1z`&RnJ5wrW@4a+gMrKro8GAHpRiy49^OGYaF^djgjvzjWYiMYE1PPhNXwQ zAQIeqb2&+7k)snxV-7Efj$EIt9QOS8-#>Gt8qCMwl0BJ&OiX_MGZ%{^ipz<4It z36Pdlu+*R8n@pveXQ*ZcEKdT+*>vjJ zn4>RJ&%jI^^K#%H4blfg-ejaE4d>oB+#v9`>C%g}?;kE)51N*|V*+yH{>LpAk4NO% zTft&xbb>6kHiwop{D7UECs=(-qIW=WLrpm#Zx2fe3(MbJt*Ja0W2Ph=d-xYkvJJ@O z8r3sbn`;XaK<)H#23m)F_9*U=hrSr-uL@bL9yO<5!!V>8aqe!wh8d1SUMwh4Zh`G2|Zcv`z*7IMj*;+&i9H&-O=q*l|dXhbS> zjMkM#?9ZWh@bd30+P?;Q%~Ez$aNR+6_4YSk*qeO?`I*mf^_RM{KhaI6gZZDLQta9Y}slN=C`T7ZBAON#-Ewn@+X8=Zw9PKR=5v*=ddKs{1s zCG+n?f0BA(RfXGBbgotC?faqVqD8m|kUw6J%Fy9BP=3*_P}W0DNkda4m`uBTH|%w# zo5`$!{1&u8A!G*V$&!$SM9}Fm+bd~&12i1!go}^ZMRS1rv}=N3_atm9n949Cw9EIw zYgLV#ncs7MSaVDRY20`wHY*eeA}UnG{;UdoRUpVVHXl^*mr3=5D27$%&_$sd95E6L z;fD9^&EEGv48@K;(ft^+o%MUx>0UA+SrqR2P^7XQ(!KwSq#y zRQu1FS9a^GTwC>2i5R;k+(9s#=0Nqy|HIaMz*8N+{r`llY$Dk!BT6W;6(u_>qpY$= zD4UO&kr54&nX*I4LD>lraS;dg!d-uL~x|KsuSaGc^eKJ$8C*X#9s9bP=^ zjOF?rcIL2i;~;_S_d;azxtJT)soUOhc>Ze#K@of$q_h4R`H52U4t&=u@-NpJTVt7c zkySIcB!j4C{MhnFOCeYBZcOq|X)A0UeF3T$$@ljQy-o{?yHGB$A#IP4IT25?kYH6@ z!vuWJRC-35x21lzlW%Ec7fr!Do$@oY#e=2AG&RoUX|rS_29-}rsEK_I;hPI%iC*I$T7y$La`5CEs&C1vhws-av@ubJt1{e@z3T z_7w4?QhtzlRB+j!27+5RDXnZ$R%te{;!x1#c`v~dlF5T_Kve-A=fJ&-N6s2MPThcA zV;COl_5Q--u7!8yZt~*-$XpsfITp-;v|EIISCs*DGhcx4vs8TMlexD=iM-6kBlo%{=#HhCf0~-m_vzN2 zBzDR1Ri@n_>`*M1*IyCr^o*HENdmzJ`$sLhSg<A7=B14j^}exnS#!qCJ=r|n_Y!0n2KAEKfz#23eGAI@=~>^FMjA14U8CdoUN?b# za!ww27pAJ354W8)Rn1_xilX8(=8!9zli|c6I$0&eFtSq zI?{nMy|r;aCn^6QZrRH8YpQu7MPiiH9q<`cUj-G;KP%MQNdEtzru?VVr9i_kfZgKX z;rfcLixS>)_+Fe|8~$4h1J(ryTL3}0d9RU*H6k4CFdRQi56=Opyft&;5dh|0`N6S;@Hjxy-EU#A1?9x0Elhw@&bmT zIAo9x_B{&|aiCH)7wC0BZ@~s?GFEHJ1c&r@G+USB!Y;ennR+{xU0#}p&Annj+@&6h z57|ZREC3K!cPC5$RmTxiqGT|wTO=r*PII0Fg#Cpc@s~h7Ug#0yq<^!Zpp>&XWKdc@6tWT2PQ&2cJE2g*WGUHrATQi#mH=LQf%rH>hBmnw0pcSRWsSp zz&M^mN%c&2Bm;WNb*;S5nwDh{zrFXz?JCYxDPFp%$db}@&co3{jJh&d(2}B_8u#9j zeEXbma7^pp`!U4?ru|}5mz!RFgHGbwA=J?8w_c`su+LYZM7FQq;m zTf=*+-~ucOFI}zwhB(EIpM?ItOX{G#7j)KSx|o!TFbh%RGYqgitw;b$wgEYGY`y+< zY{Mvk)$p!-^;RUqdJ3gwj5o6vIV?)_{I$YS6TXd13XmdsfIsx?#81O2M?7Bj z-x>idbDs@Jpoa--{Loce_{(k3F(1Dq}pz#VzCL%$Y$~$j*nv+k&xcj_7SFSym`p*}U2UDcT06oLf>m4%5u?}0n<2kTczimuPQoN zD$R(1u>vC=@iPNCiY_56V@*lm(-vD!xH8EZYdB~bFOizVjDBany;~S2N>?PeVWb($ zi$h5RguH_A{qRQqdkpj$#z6VMD;L773D_D58;p6cTFJ4b@PylQc*1e+J(~jri^FY84@6EzRe>u96X&spr&&+QrrK8a> z%nMqcejGhJlpdjPM|d#OI$HP9rKw6>l|X;P#6_m`!3$W%yp3zTg`9!o=egIJA1PfZ zm;?@_F;NMe3SWH4u?T|I2W20is<#f;S%&%0$_L^xCUo%weMcBNz(|dr1jVPg1qPCg z-S+qWN_RJy!a1jlv%R+EcF)CP56jO>3N$LvQG9N4TL0@vVKGZw*lR?O70Y5-*l@9> zJ2X^T4rv#Zn>#j0{Xs{S7M*qEy`HW5@>C7l$~%SlLwO^DV_8!#g?qJA2u=Hg+)n9u zpi4vO{nt{$nux9O!s$kbXTeh^M1tQ)@15aQa{ng}kgol_t#9mW8e}lzR z@r7r*8}p_&!>`Q~wl3odLN8I2(vq7iQar$sNoE|5t$uN^#mvy_jA#G0IWo;K3HPqw zxIbBN9ZtiK(tXr=a)W~e1vnMeXV#6G1z20q{dAs7T>%^vd~Q0>`}N*3!3Hc&>xAqiT5#tm!G-T8_)W&P8hMdisY_$)|m9 zk2^-)HaSYNNw6>%p2BqexV*jd^({|dhF`{?i)KAPLy3obn>>T+ACN3>--ul?<4O>> zQb|2KxV-bWyQgKq7qP^?U*rU>vr`m+l3TZ5xs+O61k8H;YWnYTftboWA~(z4>a@0= zOJcOrS_aJcMF7{ektWzpG0VkNmCi?n;J-j|8ew^Zw=GZRiore9Z&O*!3?-E0_~aX? z0m=ln3xIIh446rxC_UAYf$|t-6k@lSX{dEV6p2ekyv`vVl;0Riz0Yn8?23wV{zSNU z;>b1Sk@4nqsSr7>1fm$OoRm+0^68r2iQP%feE!92q!$30`hlr8J57V8>Dkl=W#=XI zMasJ=c_iz-GL!pQtgt0^FK-6@qu3R_a2fwcq{;@@uL4O2etk+mO1e=G0C~`%-{d=ej1oW9S+}jN?cLM)P*N1Pp7o#FiSNVS(l%=Xb+Ow`9BIN z4444kGSF?8d(E#fqC_m@9}??{3SH(xr-War$E37THCL3=mZ2CNYg=Zsp zFf%~>>QG`_`8!Z`W`Bc11A81k?GwP$Eve>LTqAk317PWd;sG^L!;8{X-_Q6m;CsSV z$BrstZl3JINy)=iX$)}r(&`xbsTc-E5C#6LsBgG7&X)-UoCAx!ISw4Jqq;|CU%Fn8 zqr*_aYvVG%D6+P&02~J+7oJ^(Z1)aioct?MT}*YJCkJS&$>6Ur;Sh}ZHFc5xnLE_ z3b2b*yz4*kvX@kIgmmBA&*uy-k`ezsi{hwnauzRdlZ#jr_yt@I-%~~cFRN8F0rWnz2$n}+PkN6m|#o9R8ASb z%p}4@)E{@}B9qTkiKS>ty?1EPmTB2|K}Te!VC8rH?&U2ud(6`3{)yG!hjr4584PV6 zX(F^aq1{z0kpj()ivIrYh{k*njhW9Q=(woLBGi|=4wpk%s=)iTp1+p+ebx0zXJ$Gv zUFvqE04m>47czlG%+dGh)33X{Jp&z6Qs#VOe&V$_J2Q&cm9D}8;kLA$SahZb%?FSp zDdxyS^IG;8>(_NrcfcODL<^*^19Db=>`=0%xn({4tcCom zlp|2v+kJ%*FzahtGG?1A)x%r0E5o|=gM@v~L}%I1F~!GRG4cKAg_4)L?5f~tXYDLT zx~kQ)bclqib%=&64_*d-61DkwcKY2}o4m8rF7JjK2EP0~jQJLHbk$!t)}$A6=$YP` zxjJx*s7pu#l*lrku3b0oSRIhRDfTF-D~-?h!y{U}j~x>jKD;{^ql8#H5nUQvriFbq zcXQfsXa7T-gl)m#sc@-*{i#RjvREvCRnuO~$Tfce9=2{BY#!_QdOX{`WJHFVIGZ(; zRoPzb5&X%X;;5i`x(80i8s$uie~`Gri&1*Y_6I`J8J*^W?f>(EpkL+x`)JsuX6PhI z`+R=V+`j$)|D(Z|j3K`A(~pS%`S|c7;=eygSSqpmh!FBYuwCrFyf_zJ75*d%pvJSO*E3GtHYMP1POkTm16WBgS zfb4oL&P|pwc**DFyUC6>H|Hci7~borCe)nd981IBE8HO=gFb5{2hGmgb8n!a3TjpK zkL)Zz&vZWG2x2eipKFg>DaDL)bQXc0^KzyNV;8%1uqa~wwDY2M@Ys^7RFFwCf&U6( zzRA_Rd;;WSWrOU5q^N{o--pl)EpMr9aTM_EFRB0kR*sqdk8*4glw*G_URwS#I%y@BzNkj~KY_?zIKU_#RfUTPv|nRrJ~P)K`R zXy9lrrdksG^J;{!tSfIy_)lNCp%!BUW3M@~QwQRm4!`G2P&jET{;Qu}yq&lB!kiBC z|A2>@m0?YanmKkS2u?9E?w&%RBEQnvwkZ0?I^p#EjeEpYqvBQoCaC2vt zmnKjnhj}C)%p=d|cYV&}lgQNDk6DV_stsyjyvDA4`)QNnJAoqGM=G)`J6s+1>W<1)j9t=CtEgVaKe9$BI>ha&VW4A8#8oUk4BQ@M0B{FD`_-o6Y zqbOS6ZZbE+$EZQ15K-ZDdiB)0PKe>LENd6T&h_2<28@{(CMAyF5?(n~5m(Yd0UFr# z`H^|(OOI9xvO#%iy&b}zpa+k|L~GJ8>#!_Fn9!AqIf1jxOf{&`@}aJ!vF5wbAgHYR zN+w0E!Y^J(o1@>6#eMlrRSd3P>Dl@FU#;bs8<@$kJUJ{ANyk9#74!1A!*Q-)5w%U< za|K2E%E3%{N6musN=C{bCGO*f2fp;p!-O`!jD6uyAfuMa`{S0YamuoN=ps;{k)=`7 zo2+Lt=T;+Yx%Y}~$Em&Jz|Fa+)fZVKuOOwV*?Vbz>GRHZScLn)GoDfQjwQCTsOLO6 z`h7tAmi~A_40)iD)d5kL`X>T6@LtE7&EJ@q?v{S!eZOVbAtO*ZPFYjsYn! z?rvrX{flY~=sKp4Qb(shR1SS31p^EU7#YiqGK}q%7Hr+0PWzpyEU2R=VUq{Vlx!B! z@zy3Nz>0-%Deok;2QRj9DhpOpf-z+adx3e&Elf$yj@HPJ+A+6Z7D|sbY+W&_Y_k~` zExfV|t~H>tP2X8(rL$67FUYfr6}X{=+{oZuxMSP)`!#;YHZFrJzV z_c{$`J%OjJEaAWW2zY7M^N%3DLQ1y?STYT6p_c4Rr9=2Rk;$YdKKgkxlYq8^NTWcpK*sxbw>sZwUl2x!-)58{YN_o?2ia1sYsUrM`~GeC!_UrbwQnT zi~5Lw0gYJHCFT5ObLq%?Dw|XQEN52*AlZR3Cz*3`N-A#xe`1ZOVRg5qHaC<$v(jW7?_{VuO@th` zUhzEhWNJC9EQknyyhdw&33D9JOXgID7-`|a0a5I#TT0R>rSCN6S!J6_Ji!01*5tx~ zW~go_Ke4x6L_G*uaVOf7__yZOJ zICFr^jQj*N&}fK^YIn`^1B1Z7;rkB?gtq10E>O6Al-9j$^?2k?hXvacgJ2srw~-+ERv7)K`JEt*)4R|HGrjcGeFz zRHsBo#m7=~7bouIadF6YbbjWE<6@KrK+Q8ONejL5bt263vTJFX`cv_qsgZ&}UdYV9 z&P}-{r$^Ttd&){-c@%t})j8Gk;~KCm8tJ);rn1R)0*Rr7+`nfCxNf$~+OJCi%X6^F z-(>~1+k=NEwpO6p+o|PiMWZ-OJRm^FI(1h=!4azT02=}{L1emv7&ca>twl0NII#%Q zXHtr|`9GrJ`G(_sR+aGVSEGc+aP9X@_47KMNqg7mO1W*0`(6QPa|LJtEwuoN+&HYE z0M5XVqrNyJw4eHzhmkZ3y2ZYVSLuFaw*F-s2(_f*t|y0|*tYk0ZRIDO(@jIQNo8|BirfaQXCltp<0*4rJ9}EE&XxauXK|%G zL4z9lq?P1|ZrMwH-b=4@-31;CN}#}GuFK0;My~(h zU&RY&K6KTgdE^iK=L5A@Q-B_uCFq;DMp3gzrgdMSCcJ%C>N7||P{3)6n zkKUlfL0HGn$Qg!Dy_*5*&DV$D0t=(&6B2&Ep$p$*M6WhvJ4&$RyZ27`R*`_o_MfK@ z|Cog1@6du_?tvWGsgUBCXu-F4hdTJ{co5Vif>tq-+zVv>h)HaG5TM50MHUX(py2Zj@o@a6gSAKcnTu+HrZm4yl#EeIb@e@3~>)iVB zulep@^NQ(auPUrge)Ng5t}a}P;PN`*`4a8?*D%i2K|d=haTCmO-Qp*hllf>)P|Sbk zm&h@e&-22=I>p9}C*B16NpVv5M-o;bY@nK06Pw{8`rGK8{ve9ufs$Sl(=lB>6*ciJ z`$*yM!51jj(g^RlEI0ba%O~>cl>L=4j`F=-MCNqosoPuko889-y`g8(I`aJ6x(BQ% z=Snp1*uj~1+52C}*!Pj=glK#fJfK~mz~%37^FW_|lkkM`Mh9~HWsN-iS0N;!eno6xclLYo)TxsNgjyShtN3bBmzOa#WT-)Hk zYjb5L*rX#tFls%HaD9QtgPZ%T)7G4qY*Q{V>>K=ovsW%q9d>+uIlF{_~8ahOgpEo z=d`B$1T)MSbAmQ&ILJuCxc^g@Uudj|NpfN`<q`pBoHVYnqB^7yA$u54#6NVpk=O zH+W@PhyUKyzUvh~N_gI@t44;8;D>b<`#!F=?W2zM4cR@rk77dzuD{HfXCHw?PFb-{ zUOVYJAo>jo1>kGu<=N=Pq8-NCb=oybc+K~@;p-x+`WJ`8-k-MX_}=(>Tx4q&BOmhm zD9^Sn77bt%%rufINau|E;`IZI_gVo!BkAmALc2uMA zr!+S<;{-YBGYtet0E2Yl0i(+n(iyk^KQT#!0r)$CqSkrNt%tXly5G45o)nM_dm_+k zKUD9}S+)F3{uULKcI#uhLsdrV))fa1kGat z78~xPV=*a&Ou?#KyrcLqAEA3=86NC{X0_Q)5J5iNXc-p@54?GJT?I2M_dGm+0I&eNo-(#=|%72ikDriymUudlW2&@8LLqb9X z3mAx|6BquaMCqYq(iWX}cIX+oo4(x%o?^-0mFE%fZ{n)lz(L4 zea3g9IaAi>_yDZf;mGlt%%Ncbv7gfvZG4$f&A7Ms+spxCU|rM?7z|gV93qOjuuD0?Fge ze`r*rgU=y)OvL|UIBZvOW>(ZyCyY*;pxlE zH(7G&n^mv~v{)H2q*9l?@JB|f_`gG&oaR3LuY5ztfBA;^uwN>owR8-qItYSN>0IASy*_ED)fRM89s?^~Qk|=DA^@)O$ zsC?*lUNK#AWIXZJV_r+i9q|yS1J_xp`k*h{8e6=}IJimFZqejed`Ndk0M8{Sl30~% z815{x&9n`Bf%Dnt=7%qMW)?hdqyLTT-40tz==+F>MmcnD^JXTed7Go~-CBfWJu!9b zHHi>Q^sGJloxeVwgr5gW03G_k*(X|pMo^-lTm=NbNka{i1vG@P2gkYdm(cM=^}8sC zAhV+f8XE~bn4^;)#1$b|sc*PmmsvsD&fjr4vuJyu(#FU$^N#Y*Qy!@7C*-}dG+LQO3uU(4F@&~H74sAD7;*23Id0QeQ zuwFfwhH({Nm}mkwx9tqIUpX$JJ7fBPu9*jjj`jvUhf24$Y{|hw6Ou^|rLy6`1BD}y zPF-}~s_#d`UF`<`ZJ>s7+kkEn9Fn5#3SU{$>7a!ss0O473bgJiMa5XIYi&;a^uwjY+#&ZQ^U024qS?&YA)gWdO#n==ca1}w& zAJwRbg5vo&Y}&X5dN}v!w{`ifIG;%yLuOiSo;W0phDVL}9wGIO<9aicoP08gSQaU< zKD%41D2wAMsn1M*9OVQTs-PD+Eq?G?7bxLUE?}#Urk~fG`x9Wq=}-&ol(FOxh5Cvr z3;t-QIkFT;F#iuQ2s7?pe*>;(L2n;ML-K5!3*1$0ZI;7PDj8QrkQ3qT`9cZN~SU9ABw8uojo*Yqe4<7Xwlm=ETb1 z+GXH0sdhx46wOtC;41lZPWDg%HzQNcrQp5#JrdpO$z4_5kga9==aOpioz^>T>#(<` zd5=RN^T1A9IJ&HyCtQCrq-cr#Q*O2q0vaQeJuSM^wP|s<1i4?LFitW$ zK(T{Z5x7w;#PiH8-21=#OeUE%Hf$)FH3@D=gBWx4(lfJ{3nIG6 z?$%l|zh4jfQpJ8l;#+l}65GLCR8WR*Emu@2vu#Dq+NZ0ujylV|MkPh3H=cY-U%lCM zeGJ>sI;*d~{y2FGbNfjkNQ!#zG!yFdVT(0xa?n}sR3tq0L&R`X?~PleTD6y zyz<<~WsBN{)26$}7mN^Gk>0s)gvgsHCr8B_3%u;N^}j%P>QlHHFZ+BhfF)$9*Qmvf zIRaq)bbVhtjOi+E#mhsp&NJO?|CG8a063j1IP&_=i+7lm;N{Rp-JFkr@IWrwsf%Co zM#nH!wnNZ*ISxr!7%Jc)56DrjCGn2goO$9?ZpXuvA>kq-gfw2+aIJqDKlhdncv(Ez zE}^>eN}Q0*;@M*654YA&-MVt?3;ZLr2BevJImtq$GN9x3_4HN&mkJ2&X#WMg zu_3n2o?;*G{nrOuySem>>icIsCvVL*1(tYBw(NFB?d+TX=gBJ{q{y5l++$L~xcYu( zkvSI?!*>#BHhw4h*QlBoX6_zn{h&iamwHbOUg72ri7o)h zsB1cn3qm?);0zD8k!MItP~h7)rA0g)`0Tz2;HOMuzb*^(lqHCCB`nKpe3q=XrNdXD{Eu)%3fUu)IlFZzr}l2$?iq;DHNTRHqSt`B z=5j4w50n6{{(b|Z0p}rlFBtlndmH;BlZ=6vVQJwA7b3LTXimT>s3JoOS4Gd$e>?fM zM3TGvaE9V<-BmFC+Yg!qoPqVKoBasL=_R^Xh_e;mJ;_76d}_2Yh#tDRBVwvM!ab;A z9W#3oZr#PJWYCjIzm<5t^5uQ4aPeETCAIJq_v6mFUooZU(12x4f(bO(inqCVORmEW1j#DAGD53SLbs=nM6L>!`}AAepJ zio*SJMhEMkfc*SfY5WPlb}R%~vqg+^AH$B+GI+AR!!JPKFz*5;nx!+R$8HJI=6H7zN3 zEJh^FABNs%3s`VxBGs`Zlg?&FGlKCaYoaeG6jt=;DAKfqyS`uns=e`YD z2x5)CYXNB8REignB!+c=`e#0%1}K<&%a2>sm`WX&5UqIwQV~Do z#17!@-8&?1k6)T4Qoahka7qBd_wKz4Dw<4wdKHt33`^L|yDOjFn3Ta=*KDK}?B4z( zBcXCUdvN!PXDd?-AEVo>s}M7BwvPz@ZM$wTNw&}Fv1}hG4DxxX7-BBLr6&gEl8xj6 zG3+XvQl_>Ar|}kcvD#DPF@th=Zf?XQE;iD6Ca(|t?ph1c>q$-;M9Eww)f`YEHaT@E zAeK#me$UH_1fred*U3c+tfs1K<&i~$e~Jv2KoQV0q)z*MQrTXhCxpCrxvPJXrIO@OP*V&o*~hovp>o66}e*G9C?hqxC_=%TIw48M&s)K=;Q+qbqb#i zZmG2IaLa2MdWTA|r;9D27U})5F5CkdsVzFjeE)X3K45tPAKy*Nm=l^+3cIvXLA68f zE64tsG{h|-)&2EFhdC3hne3NuX%M!d7O(}hX!27h(3O^Mq7qzobFaa6gD61ix#;=d zmG@6x9z3ZYzaU{S3!Ly2TOUSP;Pl3>JE=nt>CrWq|Cvj4dW>OY(|+-jJ2kjXo7;X| zGToc-&$eQi?&4z^0N`iWOcO-HN?PA|FqTY=y^?xK4Y?sfw#!A^x6yeK$2K{0S$#)l z;G}lR(`HGx!;!x-p(~z73KP(f_|mkg=Auabc-U-R~vwcFrTtRx|}0ua(F@CWTK&F5_=x-^njKe}4Q8*;#^kzy-#c-=acB^s1kuzvRVxBZ`=1HJpN83n^|mv-n$?m@sU-G&sn zJ7CPp;6W(KO%MA7q7bS5Q?_q}vi?}YF{!@KMMUrYSS*tVZRR^}Rdg7H^(;ig4sq4! z!uZ!rYChTUBbdkR5x_p%ka8dv>h?s3MSo=Zf5KFG?&Wgi>1gPpByT@V%J%haoQrmk z({qe!mfS{864!1S-AR6S`H;0(gKt+7H(&mc0p0j&{y?dA7!x*%aEU?S__>b0f8Y7l zaY0XfQ^8bHnLvjXzcTi|xo-2`{5xywF%k0NN2wR52%G{a^`3*QGU9M}PsY-$j5ULo zOz}*D2~uHq5Bom0lK00&*jWxOVuT9wCn_#Eb>7;&`7S1vjnpn`2RPmkDsa^Y$`O-a zdeDR_&VjD3A##n$ifYI29r^UdL8$mzG@qmXkLnle@Ga}hLDBMzu&nCL5SzRN>vH_o zsI%bK__6FQVy*Zdr&F+E71&YS7T~YKSg9{Kn#?1YX6;J zzI;MxRV`Zb!DoXvlGl=EdKagdLtweb@R|Z$>MwTNf<#m+s<|%@&PG4Uj&Z(!4Zl!K z_EQ!pB* zAL|@G4}~CuA)fo&lX>uJNCSQ9)%!mB+h<#KK z0agwxX$}v==E<76s+aG-f5F$s5zzTb{^+qw#nVh@ozW>h)rOLVEVA`%#Gyc9^8=ovR>D9A7cxT#-^DU z3g*M>y*}ROLU^3CTy>CqM(88D?C*NFcKyit(eBOX-Z3|RNl}!N`NZ|9hZ`%n{A(K9 z{Mia5aXgG}Fht-W-Im62!8{-){g_QOSMgBigZKijyIAT~0RU5*Jj+{uM8a)>b5q?T zx1jldPqxHnOy82tvw^!*Ya=93%A#@?snEi9>0aMkMGkAtMOHME5n7N`4>-@Rk!QPGldO2fZ@8(8VA<10BeF8ma&O#%`k(3|{fKdLe5 z$@@o&-Fpyp`sl=y$;Y+VIUF3j4jkX#S=DHbjCEsJV5*OK8veQxxwBfNsva)DAY z{Z+s4%2-JRUPS(W?Q|kLoGAg`Bc(kV7C+Ue@Dg=;fw{z!8kf}t$F6^Ap7sma2h|~b za~wPT#_ukWgJ*E%Ur7P5|1v;ihw6@=qU);e9u{UEe*ZnftJotOZ&W=2)9x%x8_5}G ztb4Hs(nvnv zOP0h7`kfy%ZeXn6)2ioOq0G(+HmT@$YxKWkc7lz>+#TtCh)#{$x}q$5 z;)#acE8YIME9^2R@BkjF9>?-&{kJ!9=M`0w`xc|)R^BvGk&%LyqT{7*)3|^n9`=(z z8W>%UUhKXB*K%u%_i8Xm4P(YDUBX0}8+hLbzCy12z6}G$Y*I+ri~;UdAp=h$A?9FY zdXS`S@U%U34phP_SMo#c`HsAY-yDb$bw=&uRF4?EbGg(+iFJhg&T%Te2!W zMi4XW&Bnph@ZwVO3F7Y0RKi3=i;c&@e40ayf+bs%;5gC8nxnNtY`C>RXQ9Bw;@8uYV7k}UvuXwgogqs<0Kd$~bv*DBCC~Iu zbQ?R7%(N13#`srF>c}*35Jw;c`GVQAK{Wld-t=-$pKjAqC*KaLI`Y?VtFgF6Xgs*O zNV8K>7A;C3RB{;qOO%nit#H9dU`7?Z;iv7HscSCLglAHt0H8}N!H02wYXsxL&hjBd zAz4@_UmHy0JBCDWEGH;rEi(WRK%v-@VG5`)uP2JW$sr=0sx%i6E)oD=e4yY-gr6G@ zIn~F(-`^>U0%FbIc&!(WuQV+l50CX9Uksdl3&o^dTP^0@FpLALt9}bL0XeAsdS-ydn)WF zx#1<1GSV48@J@M|P>GP~QilR6rX)jK=XolDP^e*0n0EC+VA~pY+JCkSX>O};Nxgf< z8O-nw+DjEvQ*){`9TicXcNTOS*q%cJb9$DE5Ey136M3H8_7rOiB& zeYBp&of>aVZkEieAEmWe9DbAyHy{2CavpLlrZu^=kk|pq-5n55$wPw^3xJp335Hry zP&GhePNz^)AVumu*H*G`nDlmc*`$LsPZ`(D{(9Z7?%H&I)UhU@`q@pc-C$GRk&!7m za_st!SzxccG+B9ljZK|ypeFNE)FG7F@3(T{VVGf>Yr6o78$A+C$JWe9o!5~H8I)g$ z^XZKQ=)aZ7LSbJ2;>-K1biV?Om4)IMFz;FIrGbaU;(uRpzTek{mSn>y7Z?OiFPQwCY_ zySGZHLh&@0$Np@exr_06_%LE)TtF3P@4%h3pv>oxw($5@4`l%d6vU(T3X${h*iDJ1 zRk{E8j;=^#tY`d0$(?Sp9TdDQrvlMqZ}ZD5TWGeF2svt@!0J$P!@@T%lUxOc-cmzu z`)QmrELwb(XOh@*_AgLFX|)(}z=lq(&Z1MREfoZHto(3%83;mvh5;w7{2Ww%_LBGb z4n*1O8#!q~X(j@EdI*i8pbXMSUz2~vixr7yRU4K(+<5%5;3gxV@7Y91*P1t#TTn~V z>AiRq!j1zRiOUh&k0Y%T4Xnp#<|=zE#qbFnb3H=5s!6Z?v#< z*DUq1ItStZ#|s@^_PnSRLd}`v*Q1+1SUzGeEgHVAvgE0nfoxm48K8*$^lX> zVC{cuwOWUXF10EW4y_k3wEzS^DL9af(Fm)i-)YlIi7K_}Tj5Ymmbk%O1tc&K8~`qJ z1V+#=JnL*^eq|PI>hPU^(LDNkalzAMyz|~t+{qcA&vUH2ICA;BC9yvU84IC}GsW34Fp(DBqN<|k5# zGv-lzSg$U!5LgRHT4j)R!G3K=Dq>;1*-rxIVX5*@Xx;H|H?R=G0!OplTtdh?bw|S( zorjk}3mA6oc-NKx?ArSNF+ZMa`NSC(yeNn&dYkXG{d>jg4=_-|t3f}hY3J#Gb}M3k za(@6y-U=PDZ$*Eut;9*`|Aa&9me6Y#5XA`8%s)90Aa@EKKO9=X<}cOG{-t_Uv{AX& z!soi*`AhrmnV-05SH-tOv1PXHskl19?4imjv;LK|>q_gR!da3b#Zp5TKa(3kzGKIm z?G0?ghMPhzIOEvx0me=`$Uu-LJqRl{8pp=N>%qz6w6|Qc>7dxPn!+kjT!7%;BtZtx zAm&$B-pF&*3AH3|r-z16>o}}dF_@Kx258?H zub@E&qW z?o&(Ncc~x-aPWSYQ7}CGilYWd65`aVUnGUcmhfmivTf@Az)MV$YAf>?Tk^Z%$YmLIRQ zlQhI0!%-;pllqk{Zf|Q%Bx2nqRu1h0Dc1sb1L&fuUZ)eb7_P6ybP*J(=-Q0(BT7B- ziPwXRO=qutIbfkOpS28QyL;yFmG?Cy>vhKT<96AgL^)-%I6W#Tcz$iYef>z`$j*&( z377xt5}jGJotwhyNag1{-BaShfLQa@^!1!f&w12kN&aL?elMRqg6PBFTI@Exk<5Kn zU%#B%^)S|iJK(Iv>f0^5sr4NFM6O>YG=C2crI5PJ^Y5%zgg8z+$!i+{TynqQ9xhn` zMU3ayFX8P;OaX_QVOc|s(%7p`$_o+*c|0RiGMfFzU!_P59p1}1p=&0$D-kTJXmjgf z&A5%RYwIONT2ao1{Tj@tKu@9Hp2v!P>VN7|5V06{bu-h{LurU~vElLO=c@cVC|Xx& z8|))rP)^9~#3mZEvW`ZIbAAph9j8GFgLx+aWPNY8-t;gFnl73BE3mO|1en)mmeTHuyDO{(=ib&vNkVz;>xb zLREj)YA8VvsM`YT8d+3>r-Uob31X65nD~c26V^n=ETNzh;m0yx2>RCKBGO5AWyzN( zZj5%;7_b{vq%v1Bun7$l1+Px?1oyT3)_6w{U=HLdgvLIp5Y%E3vm4$ev|yuAu+!yYd7&5TzWKSX*6|~{Pre1e0B^nC z3n;8ns>`x6@V&rS|B*t32rM{8oL~+qzJH>Ol-nu6a8!P)mL?v6;Ec2EGr*lS7pG8y z&7PY=!UZ%L<5+`s({Rc=EndzQo%)(*N*PI(2!Hnlw&np$(hdNrcRnJAL-mz%+IoO9%D$3cr=ZUhcx2|pV zSF$<@TzK<{LPYKTp}Dw4t_a5bgfQmfa4v?EAR*Xk&oFT@S&(M^e5-96uhB8NYLu ztVgSzoz< zX@0wIlV~|;1YCnk$s3P}Gq0yp94ofR-(>n%<#q-Y*Oz@KtT^!ArZl|T&i=$ZoAi_} zP3UV*2Jbrk`a|Tx-If07h^`UBfCd*#N)ty-k&cyoz!nqBm-+2SoT}e&^BT)RPFG&) z=f3k}YU_eX0!5eS1PY=e3fHzHaUv5je{=A^wne^NjSm({?GnV4Tc}Af5#Q>OU4ir5 zxqs}OhrZFNtQT%(^(`tNM+p6xftG75S@fQE2`F)c#R$g*c<#*cx_&x(y1Ls+muq5d z{5S3?uRDR!jA;|loPn9(=vxvESa(k~@`=E@Kf_``zB4tf>t_Tki@j7=Go|o}J zBw$wrZ~nDZQmd0XRfSv8~?XcV`joTBj)Caw3RZ6>BDp*g3iz5 zPAox@{1Y*kL$h1WcH*89V0hJ#=%d%``&*|D_cQTAYP+rzZV{V_0Z2X!TgIJ~@KkHO zhXna#P9*_(A7BD1+sj@V!|3cF`}1}dl=;}o-RpIkH)(qViqziH&Gh#z?QcFp={~)( zT}rzr7S~PBDqj!7kbIc;PdQVdp#{CLq$#e%jkN3EZ|dJ%>{~J$LWH5owEL^8lmsM# z;0?cVRNPs265Qc;lpO!m@iEGp@J6?8{<-wS7R#4?P|!Y7(mo<$tJq}D3qC^R zn8E|Plj9~Il7UVc-?qL|_YQ_pCcNZdwJ}u>LPCE<0R+Tw!IlR{&m5uC>O<`PuH0+CfFYu7rsqemR5{&A8bLkPNNye@` zNrgz{{VZpP`_S*JJ(|Mag9M;ZfkDiu47IIB<;iho{cy=m^1Dlw%582HN5_Ql7s+PO4SQFmph&{H}g*D;jifdSCtv zYDRVem!4qB;H6uLPygNEC&zkI9h{g?1xabOt}j{#G!6fsPd6EpRDj=jH^=3rs&YwcEIK}t!2x$ydUM`<>77m0_$s)dWTFW7g@k7?;XypY+M6=zmTSTsNMznNsK|K#jwFT}? z@z+#v4h@ajkUm!faq!W1Zytgn&_j=H4~b2JC{f?}h&B-PpC$YIWuLdr$2Dal!G3M9 zFQ2_VaS^HKgys1>KHa_hn}1X@x`>>%^Us%{-v%A={*aq6jMk)H;k~Y)%TK>Sg$rn- zJp3#wV3At-^mnI65A1E$4;+Qzp!%g`-Zcg@&JicD!EAa`II3;DSg)BIqE`PuoV|5a zRMGo4IztN*5(d&80xBU$H;PC}gP#vEQ0h3^IBf?d=Y;KcY7E*`b ze8V`x|P-9i?flg%)env!_1gDHa z!`gQe7AOCjxOBPlf~$Hy?_o2$m?qKfh79_v-rdON9|t}+fC$o)xN`cT0++=?myswc zqb&#Nat_K?De2ST+{5n(DOktI6`hapjxFrt5+MZKgFuD{$1DvS=NsaH8@u_Tv7-3? zY&78G=$Cf<_;PYLpms z{tVb{TP3k$G+l_1uHM-KsB%glUelg7}+2evahpu^BbctBs< zK_2}IqmDoddQ+&(xP?H)*)Q(KN!D)s{%9Al{-VCDIg*3rE0i)9>NamKt$b*1#p z^oqeVADcp!>tTF+-v`ZS_!ww117ZsGlB_Ezb2L*on&`ole@)9s8cFYgcfl!M+@ zQWqUA{`l++Wwc$|1Et#}HEiQ)yQl3nKLW@ZmfPjoko>@oI_z*Vh~uJ)FHQc=6`L(n zZ#&sI|LfkJ&Uye7R8sfa)^v+EO`kjTIHM(4e*?;_cW23C%gGPsYr>W<4J+6gfRU!1 z1mz#V0;2ORr2$5(hytPsg7UrJ_w8x*OH3t}gyI^0*1$g4vp3`4WMvQvi&-M}sZh5! zl)l(`$j2VN(x?@E-q<`WJ$G*)u6D`Wl6#Yv&B#4fpYluo-#v0rP!nX(yAx{1K$xNg zX>oGTC2cy*DmR~Mf|P(ww^MaJ#KtfN{@=YPkbs3o`bbLE#e?)p4oYMj3wIJmyG{NB zMw%Y{7qkbiI{+EEzm9Jh=8hinij%yau44PEKe2l8XZW9Fhj5jowTZgP+R8`KsHXtMF5xy zKqW{Fne@$HNBF#?TYj+}mDk%*ZXbNBQ28Ap?zs^^dS3Ep`%ADd7|Q;?|#MjW?K2 z$4GERZzLxWe8&@kjvVkcca{R@Pf|&{jo$!y936hZZk(AY29~ucB#xW$pbq5nR{~%h z(+Z82e;hlMsERl`;F{0}1tA zMe&WMY>eexZG$09dw6I@)iz(8=B}dHCc+-8w5`qF@*r^l*kEvBsHmz_{2=b?9v?jg z^!+!ARVaR=`Z8TVb*FvCu$lDkUG@(^)Oqr@!SR|Z{*#@b`-eu#szc1chCulA)lHhK z;G_P-25ziwS@QYYP(Gj)d}|n(;>65}yBl!P0ZrpjdCf12S5;!o-CXT^J$#C&1r-wd zxiW4t8xAU#YL?q7`$<8UjQ`w-(4SHQaLkP3Q-JE~#;2(O9Cx27j4m#?-jf5dg|hoH z;J(6Otds6PV&(gaJcqs#hDl)*e2kHpqXR;5p$W5)TN<+*1nZ6?ho9Gk;OM zYi_p_{B=8`akB_kIe)R}DeSp@v1o-?W_^rkq57gG@#E5tn#U*HHA4>eEFw5-u5X5v zX?iUews8DGdMCjdpQ)cQ<}?7la6B}>bHfqeY{6S*D(V@`@)qEQE=gf|p)GBI7wRJV zKfF+uY3>4;K~TA>ui?zxDIsx;TeLe#KDbk^l365_{J_(JRtwzl|9??9{|^S|en2A5 zf9RzwVDS^?3Yeh(WtT276fKYUbnO*-M!hn9{uTHjRMHg4d=Fms0M0I=9ZHX(v>=c? z5E0SZwUq-Cq&ybfyK}hAS@Da2Py={}9Y%yhwgs3G?c*xHD&7Fm`N+tRjUr&(Y0k=i zUiq~(m#d{bHg0(s=teNy=FR{a6T8>h7Qoo59qbvD3#kRM+V4z?Cldz1RYUou#)8MM zCsp;`lSvh>^-$B&G&y|b7R4r5zM~tS&OeRGin=&@u5_C(9frBJl+NQpmqLzWcDxe zp-pGx$>`&k8*ns~{D9{aphwZoK3@Rf(oUJ^!e?-^Pk!K$spL&O5A0~|!bfSI=OLV% zi4ur+hg)}^#|^YLa6Yx1>%2I+-^z#XQi&8T>q6Ou~$b1n|!~&oC z3%C|DU^4;DvCd0C;B857AnF@rw{dx~eCt7}LppaiM(sB1-S#n(qR$y6)HG>3_-cgq z(Rx&1v>kVczwa>ANKjubqlXR*65jVj93Dr!)-k98;@umrVl&5AOLnv@frMgw*A3&H zB&_Y7&zPDNzu3Ia8ZgbAjQ_MuRkTwN5++WUbMf0ClVaa6Pt${A){~wVsfPp>V)kE+ z*%|U>VP0j$o)qS8c(_X9z_`yB7tD$vljE>|v*MqR7^HaaK-7RDyGV&o&s&bH$a+j_7?l_G~FgpqQT*p z4)8Om>IU+P<=wLI?(WdbwQ0>0XQ4133j!iiAX$me$L~*E2};~A5B+z~9=teWoBfeHtrkTLpW8OTrp*3O zRW^}IoOB*wvps0tUnD0Uj3C()BL5bBH1CeGrw3x-*7lAE6vTuUBiboxFPV#+W%vZn zulgE+e2Yg7stIux=ti$W{z-@Y6Eqyae6yS9vBo{D4W-QY3?I3RhgLg?y=~8|pCIdX zYuMo4AaOBm)fMFTRub>yt+pK3yRFP{PYqbQ=vB^9tB+I5cp-4^v^)p5YhZ^ueO&N= znUff|(s(zQS48wcIaJh12CEQ`%)Q2EH5+z_@B}I2>@JY#Gr)&5+k6elV!M1Ble3yC z6~A6s{@^?ehGqL&HR6sZ_aO{NI|lOtU)r>ClA#OV%mD!zlR~RIG^&NpX~Dr(ilnSo zT6ks87OaL1x@5jHJv~=QCz;i5xmUIT?B!_8&3>7GggJQ{c+i0X_9&tO*`xV7kiG?% zb&x#*?hBsKw&B6-{l_vpOJ;vHi~IbfqHXQt1JLliguDiD&VoOXML!RFKmQn3Q$T*F zA%vG;II5W+x!b;ibaUN>E-R$*9o26?L?vc{Gy+(wNhWTvS{bi{aOx12nNTTN!Ubd^ z+-!cTMzL6ch{$^LpE2xy1rV~&(uWlpA4~C>d*7kXg$cjh0v7Kjrp7ir|0Ogd zQd??oXAv!vgPQTUEE4bU8DPN!1!F`Lq-PQ`?r~DsVzq5BJtrkI09}=%4f(U1`j~I+ z=@s1oB?=T1BKjT`D8!{Fs1>>tYyGT|K)GB~1TTcqem0rvG|Z$6(Lf+@A)jR{;4q0= zlN^}2o2L`MOfopvWL5c21or3Dd$V_d(EsT5sbri6K+F!xTmaog*|h)NK2l&1-p4oq zT%iLV12f}eT!2&G<2HSA`g1)4LqADd6i$ko>W z3jimVv%Y-ISEt!g8`1bx0V-Q}mS2WZC;aRN>hrasA-PiR#-Fd@U=63kq=@idll)0` z;in72_#(rCZqb z{;NwaP+e4w>BLfsM_oKXc~aQLiaGjwSefOzo67?%7sI557FDhR7~(F(Aj>vpa_VK* zHWuKX4!s}o3InXaiWEIC1xF;F$NI;*ry6-vsa_l1*K}*P%Opa68bbns?A`k3*D%6M zq?2 zl_Htwvg+Pf0ycAX8C43lNZm;DC=v|1eZov6z<>yOTyTJbFwm*qg)gN5#`QmvqGrV; zGOq{GJlXl9zK}M~)neDBt)2l;o4T|CCU)#V46wu1LMVVlT%KgcF~;rZg)G}_fQrTt z?=kxlKcFiE@-pR6W7h94SP-ezDz0t+VD-q1nWUV^5|+FCKh$ODKiuWz|8ST0MxWC- zg88VR13;@Kx31v;kwc-oZkmCw1AtJ;F%XWtwkvG==^f`j-6WV$a*8tlqxAR|?0IN>wlk9cJ4a#`Y-bCRa& zO$Y&<%&CI{lti|%)f7rIPU^@Vl)*QL52$Po(Y2T!`=H)qK_bj^f5rUA(dkE@!{VPGVr6D#^=F%-Fwrw#Z|D&|EqL%>Cap+(*3XrEq z&AWoQCrgftGxK9MU?}$6s)FA&v6ZaexH0w8SOd@spYyg=Z?+sYe+GxOd7}kzJP@gN z@&D)+>dZ>=fq)A2A34ti?|wXU~RpyruxxB&DKO49N9`&~JmaYT^hZR*EV^9Y|kc2}O)D5yW!M?~TXx zs%o|}+mbAWr9<%2D`=s#@;gPuK=R?9nsNEhd-{|PfiZ1bpDq3Kll{Dmcxufc(M3;HoySJl%r6<$4WV`CWk+sdMFvVb1M zTb1ZH{tcVL#YI5R_%Ky=+gCg)2z=}awQx?p+k z05eqF7N!fFc5fvDQ>QdeVi~@Epoi@EH7eu%g_+syltNHVrxx`7r%QOfXUZ8{F?If* z@F^bDS#3SQu}w9YOY{SeULLZI=yo~>k-Iz>6X%`Ld*b(k;)poAz?DzrQ_=Y?H9qa(`%YEO|hKpM~3*?vrzj7QIx zX7d&SKem8qvb?vE{;z=ODe=uQbCIm8VIbgY9-*w$2FgQPJ-ue3FxSJf1eftmAzw}z zVN2nsmq#1Cci;E#Zavogc;;X_dRhGxTG}>{SlAN;YqVluDw6xEq15;6?%JS;p^=6C>A_GYa72INME9?H zxT)=w$9~m#XRnG86asTZAE*n1_xiD*N?6SUDu~0*;4SDGV8U4*`K$*N7!Qx9$@y&~hM zRSnQ1_Cj}ok2!Te-UJ5~)*kIX?Psi>;gStZva6LQIF}YcGIbYJEWmLBzZr&&;EepF zF5efa6u$i9`Q@e^7mf)u zEhHO(C*(6_PStZ~h!udcnOiN-0C-n0`7=daj@R|65d{(b?@|3D61f0_nCKHkiQxv?XOWB#Y42clH&{JYk#l;2VV^sqKYFW7&x4m`mJshwF^F5L&-JkHW5_Y5 zQI1}K&iEc&VNa-mEyM;JaeLy8@lD5FTulM(0W( zY=_;|cn^poeN>&MF=&o^Unca#I74mx-LPzpvu$nLXqJ-ltVeZ{Alj?RioK@}(&|vR zHb8`>e$phGt;A6X8XIGeNPpT0bJPx zr2*#hY1DelWJP6fw2W1YTHLZqTx~~`^6~`$kCkJVuuu2MzJajuXC4kRhuqmA`cxth zD6CZj^}KJSYf+#v^IH&BKS21LFk@#ufbBKXCkQ19fQ^lg@+sYfPshiA8sW>z^s$F1 zjKe!I%aMUWY%ZTlsTVw{;CdLMu5I7G;VfzW-9IH)`6lG-HEGl7sNGm4#;L6KA7rDU z{-YGWGaS$jXN{-961)q?pOOI0@%$tRwK>UbXb8o~NQSUQyL4{g=K-EcM?dHCG6+0p zH3x`xZTdtl*|D6DoA;cXfHne!IAqiD8W&p{a9WD-22o+#V;pdsTIyvK20W#ti_T%u zTmUX~97_Q=Cjy+!P`1vMst6#(LgmE_`fDhJrU%5^AVmHTH3bXMglP8<3-48s3UpiTcxDq7m@rp?~b9#woMlOF(s4h2f_dAX~qP!1hM z@&n|g$_K=op9eNzt|0hA?XCk^jsJv;Nh1%zm=%q>bUH`++&RPn(Wpj+p`$W#*Z2t~ z1cJtQ0N&V^B!rF!%*?&#kH!gY$N;#JR>)r?V#xzt9xT!86W(yG?w^j34IT)e40=le zk-+%Tzl!7>Lm1m@qXO|b;50+WHP`&SJqo}E8$`v(sJVxcHtH&rgE9zh5V+9-%`TX2 zJdnQ_E?V*~UmmC)IpKujBtFqOF>;^Q-&r>@7@e_}jjEv>y=ik*>aqT34jyF?gBw2J4?r0u^ne6bQmB^Qsz#E0tK#YUlp}TCGUo1(@3r$BzKB7y-`QIoPxC<<~B3wQ~EmG@vmKDzr>M(*v8Ya|wS`w}(GK9&b`} zexu6YnQW1nL`OZqe>`_v9wWzUR{}7NM=7!@d*Ur_f%<}7h5^+k$xWjww2Iz>t4A}Y z8*DRe08}}H>MD}lX;uKTMu_e32ON**k}yr_qo+bM?c9K?=zcqw%^F#;8-D2Y*k8(B zr7>2UavwSvLhd|$3fOB_foAC?=D|WJqWn3tTUlX8?strb>62^*oA%F_|eC70JY+G%av zbyC~wB?fK;II*9-%^We3QAY=Jm#9nVZ1Mp{4JCHOK~)j)r2VjPx2PEpL$iIBfBv9^ zteLUOYL$J~!0=SSc)FklS3ZvNrpNRc_f(XPPH#Vv*+>-eX04HF?z?Sp!vnYOvlE`; z07qO~9-`XPt!5>!@8W+yH?z#@Y_C-Wk~MFZ8sJ@t&|h7D3nHc1mID*!>cf3T2OB z{}&&E%kImkt7d4?vbN{pAmwB|QsXx~UH~s!#0QLreFwkpR*;300k&`dw*BdEpbE=^ z=neT{mec^j_uCMFDpme|2fJqf(j_x`KZ7{fK-IT^3rGVN45PoDQ^ZgHe~>8*SHAnK zjQ=B3@MJ8WFO8x&s0E#Lh0D!o=*fe*UigO5E71{HkC0{2;+l#d^o)4+xPg-EO5xX+ zP{7$|Xf1UutlSm0Aq!l0!}uzvn)4mchZ@$;IAqYOlKc(*_R^&Q5jjSbrH%JS5$dUK z5)3=k#L5LbUT_7$zpa^QVxj*tt?Qn%BqxeS+TUAgl#x+4rqJlG*zg58v1Wu1hC?dH zAGkF>u;RxCs=NE^e1K2^g`Idg&vIfp6=Qo{>44w>P)Q6Ht)LUGcJYKL5R}xW|0!?J zz;NZ`Hrm{uxAoP%{^xmVvoPz+n&uB2*BZ!Fc8b_bk9TtbVsUZ05DRsD%a1N_Rbqkb zrSvl%$!y62W5E`sl*gbYP1R}LJUAaU0lOlN@jNwE)g1yXjxFa;Zax~QiQ#7y8AZit ze|?K$Ts^wOCJ0(9dcnf!%X@O#B1|yVj01k>vnoEko4hOxzQ_a^8H-|ApUCb8BQ`Ab z@>_wF7sCk0IA%X0F#wtRO@zxKb$M~j^xO6Rn=qF$@8r#t<;BGMAXyWj2f2v+MWZWb z1}XN*5?GAjAB4f8s_>Pc;)srZa;qiD5`-6BUF>sehgDpsx%#FESij8bhx1wamWKlq zNhf^CE?;1icoSR7xmxxqA|t2vVc$j}6`XrU_K4GSn`=UES?*rIi{l7HyrxDehwn8j zDY_0&WM{t%R3%l4!VOR`QJS zxJ&i!=2Pi~D+OXB07ve1jLBu({dgjFFaD?SSj{`N%`4R=$6~Q}kS>1YJ_km2hor$i zKZlR{^sr`cVa=BW2PB1}kER^QY813*>f5W0>x|2z@A z%8b2e{!ihK|5_sO1Dgh^)zF7a^@YmIvb7V5{&(mee%x99EXHeDT zw0q%lk??@DpqvJ%{m*DKneKiZM%@D%BQ?vCcDwA0-p1$2KIXvHBF#F{uwLNGh&vGE zohJu^yzRFEdp9iAMeHIahU5bsuq$ImM$v&h7CBiSR@;a?ZwCt<0g@oVNR1*)6NnLf zBn@t6uYv?On8$ z4*K$XABil^GK^=FXRc7*pUM4PF!uc7o#bTd-8@InzIS$Pbz;@xg5wocj~@C~E?L)q z%X+P#rK0b0IrBjxlH$))VmiaORoR7Wf2Qiv8MOAz4nmG*`z|b?#t(8VN#b7lg)hJp z?nkR+c?Fl{7kl2b6kFQcRq`pKWr)e{Z6o9X)8ImiKt!okx`QGk?CrB@#;~3=B_g|Q zA&l(gLEu-Ui{zN}4e#i;YE64Dp*l?MG$k@)B8ennL%8`k7}R1aH&f zoX>;f5L+-Nr2)3ugudt^tg%o1qd(iXub4nHX!i$^)?oHoiL2fxR~#_GA05~$m6 z4`;F936U}PmibN&8EUtDx~)ZypcvlFH@fSiWK#tBd49Cda3Zq%iIX&MWHMaZ`~GA5 zzIu~j>Wszour|y41>u!+*R*F#><#6cMR!-(?4FD}8eBfH7dk}hhU@jm4V%MqDqlU2 z8lXM@(7{rR_Q(;y;M(-mYy2%9$FoX)3b5_!iiHi>rl6{dJ zbe(c^67$LiHV!F#g64h9MRn39tG$E)W%iJlAm~=i_vdPKq5#KtgUXTY%e`RQk+j}E z$FRx~pj#uHq)Z45UwZ2xo^#P=q*!d|&lQ^O{_+-fD)8Iq$qwq5G;F45^b~hQ|D${B zS7FDPF$9&HBxB}Gh|8lfI%Vipun?Jt5VDEOkVH$RerX10BzWa&H2<~UCh>ac(cr`t zz8~&-ZecMay+V2m}5Ff`0z9n z)#dtVY>Hf1im&)&Q$E2W;^!;z-(z>_+mf6=qkY8!?RmqGDL>1P6BhdP%&>3R-6SE4 z73ES-av5|Fd`bNpIXq4fxf@lS3l-E7^wJ$r5b79FjGE8a2OSK1?Ioqwmb~z?oni=n z8%fKa;nbC7V=H86>XmIboL9566dN()SBoLCEAUYrXMdf%sU2NLzCkw!a>)BOqI#=o z6-l~mootwXhN$%GB?e)>mg%uXNr?C&m{yxc4eyi<`{l{X5>b5H~Ru^1LSh$cyf!% zL=KVECKcqa4Rq(g(S zGvloO8z80DnIfO3{^GS2P1Zne!vfoP(XJPC3$R0bH^MApN zpC8n}-&>)r?qoH|vQizAX1Er)aPPb5w#r!Et_}10Q{O3?P$I}hR2}mFSlc}L_+eBu8$F*8D@Y~8u$m&*CB1oW7;SWjWt0*U`~4AQwIsu}-W2W)aM*T9b;`R$NXunh>|AV|zlNzwMM+>; ziuM*AKQ9uq7+wyunh5F|(vdK%TIHbM%itnIW(e`w^J0W z6nB7)bA+obNAe+TCjGMC}6R8>+DhJQfX_JQ@O zP=6kdTGWz4LRX?|iEpwPp_f8mrOVf14BZBWEqRH7vS*rlGsA1merKEQvyf#jy!}VZ z(ACV-_LzF<7K!M0fpG4}n*G6EGS_Q&v+47fP1pRi$wTJconITH(sZKDJu-N^eKrN^ z7Rgq^KBX&nJo=siQb;obM=?5A6*SYwLh=@`*1vS6#>QkxJ`4T079(jRxDgB)pHy34 z&=;@f>I?hUzVy|t`c~N4FX5{zyiJ1(8N5X9*~;1vFkZb|Lc1>(P@>YaH%ZNX^KE-v zT0%}255fJu^}VF7D`W>M8H8^vVd#gx)H>2_TkvlMtHG&~AQuX~lVEEdeN&GwHAppf z@z7O$!yR8Mcn%w#&07Q1h(?dBbz1wajPB-vM72dH4}7pSjdB6+R0<`s>&xZ&IL3wF z=z0^|T?)m194G(vbvYXzqAp3bej!<6g3OiBo1lkGVm-eR+KS<7?l0V4Fd@jylO?}z z78FTIU_qn60zNfn7R+ORJPN-ae<>HhH}UYj&SE{4DbPyP?9qdeyHnctQWe?b6}xb= z^-BYEU8r%mN=DTdZ|s5HQx@388}A3U`DW4^_Q_C7w%_0-8mPq6y_b;)H|+DZ{Ktr% zGJRVdB?r>%P_(m45v2@Yf^SxB_g(GiZf)&jPYIdw2D*+0;v$=7je^#?%3G%QTE~k! zbDRgp98+1*LrzEC{y_&fCK-O2Jr@bE|$c1j1V+ns_y)UD}1^QtvWelcnv zrg$3XFBt#}bG;&(lE2>MLnon~j#OzVhy+pft!1j#yjL=@N8a?mLlxlJT%&qdxm?o) zMjn>)`o64b4PlWfC*iY_DGw*cp>8k(v&00l7Q+quNvX)nV6HIj{t90BLxd-k zQ6q8iQ(;UDX}QWVK=U`X8m08GxOma7Tvu9@njrm6+lmv7$GP30}QC}=G* zSK}zT3B7F}9g;~k)2u6$UStg;EkMOut>>`+y6IA7GI2 z!1rT`Kx_Yy&Ct(!>JCgNq{t8T>ER6&cuQYNoWQ0;>g-+7^0204$mkCt9wERI`oop3 z03Tk~Yes#rEbJAICV4u6f~gQ=VwxoCYv^<5?{yL$95_J4yYzpGzHH6Xnr=VZrBJhAm8g zJe#nBO+mjFD#tIFe8m$RH!Pc9$~XlPNf-Q9A~ zdrBahsc{ckuG8@0RtEb}0M&42>8cJr4%cH1i21{-dI++W2q$BT9UqELoxO|bgQ-*1 z)2DyhO}IQlLzg`@{Se}~RC?wD{i9zRl^}rp`fE9(sJ{WXPO7wWe~?4Bqwsnl{${y`j6 z{OZGv`+Yux_$5fDWdhUNCBp5tje}bHlUZVIo;e)$FC?+=83_5l*emNtTgeiuW_do& zHg!aH-;>vqw@wbe=7qIK5A&QF#cS3Nmsq}_E;_KxcdFV zwf^I$`ycSK(OXNj!!w*YLT(T#?Vfifp1qi%KgahV%TL!oxL-Nh#dMC5J2FBDjul@@+)Kw%U5XX8e{{gY4C~j(ZPxzRAF%dzE7J-uJ_z`wo|)qbpk3pIz=UPBM-y%Y?A8k#^m&7kK}Xk-46s zw(96CI{mcoUG{WdX9al-^qzcR)C!+UFDR^oNm0=cXT3|4Ufu0^*eip6|4yn?vK12s zgT>FMl7(jbEsgtjF;4yyyMm_u=ZdUxF-74Q9fACyGb+vA3Dj^z>+A1*p*KC@d95O+ zC89b=PGLej?%F)Euu#o+$*mcJd3A=lU6Zt*5wu`f-a zeEm!FLy~CWa06qoQmo|zMA!!3ARYVQ)m`gR;Xy7+qzIAC`;lkrMWOb$`P5zrm|gyU zE~7Rjop;5%xF7XYy-AAn?CaBHX#`3(N5%oOuHN)By-elmUuo&f`OSI9>7%9x>*Ey+ z+eW50gkXvf58IXIJ{~}67Q>k;#J|Kp*&FE2nD;clglS~6<5Mcm42d2ncg}j%_X;la+3(0WGXLg^vR#Md*UG|Pz7hs zsmp2pB~}5Sn&*-s+F`_yJBa?gL4dskA{z>xD6@Q1AND?tC!n z`HAe4>6Ao#fw2xYW^S2XY`1U7cmA2bxbQ?VSxUynBYMEZ9eL7RU-@}u(AsNiIe@j6 zx2_qIVPl5;ZeP-FULI7Hel?oj zf>4EZcN?X40+`^|OIjK(yUWOP8hQ z^z=CCC|<1*G5cE50ugm>OA=*~B8{b6x#7#hgtZHfxK_-4Fyr<7lgGQt%p`q$gcEHz zcD4|7CaYTr%ElMzU)$N5z0jQ@J}#neM{gjJ!#{84bI3?A7r%Me=-a1ekm3)?8_h?? zp|&509If%wCsnKJemGl#=0VyXZ@32?e`Pzadk_f0f58M4ZNJ@cK;xQx^ve0ZcjZjs zD`s!|L-Oc&dfwFFwl|J+UH-YmXjY%Bkv{qBg2us>Clv~`MV%GCeL|}G>Q{u>cV*9p zW-2H#7)K-1uhpcwZTPY{Zy30qSVd*ZWkBI=)4hTtl7xX?PKLt*e3p98S0VrD$h~x9 z+OZ?thTHErCfetx4_pMNLGSYVp7D1%<<8i3pqdf4rA3N6d3X`|#cO;A82|Y+KYW*eTvG1sKH3#^|N>n%E5?172JcoH=<`U`TkkN(HiQ0}xE2i|Y`{8B4^=I(wxrip$bxr1~Hg=gt(pE>ds=s^GML#G~XiJwX)~BNu|VxU!|y( zi#PhgH>isfpNXDt+uyl!hweJjP5bbc`^rBk5M*RmTqhuNsSJ;p&|K|MUyfZfLXvbaA}2#Zu=^r8>#~fkgWG$;#ZT z<9jp49O4G(SzI6^utdmEVLF*irl<=))HrlTXO<@~gllM!*Y7|xlFSf6*3 z^4ZPKjK`#2z;~||lK$YmFLwoJ0r&i>br>ko1xvPEJZdSre z>$#?oN$=6ouZr~_v@XqyR{hQH7rO%eEuxagYwbO*t7FLxhb^e-6d#ZCAJdzTx#_42 zO!LfaMJaf3vDLdbNs#VcnTol*JegLPMx|WrV9ufREmvK&)4!M!h~S6gsiVaGT>0{` z?GoMn!#y1@&xNPaXRDf`l3}^ZtNUE(4DmxXH&CfQ#b2i{+;{i+)0;e8JS7E2P{+sV z($mf2=bnd{gdcx$$68XGTh7x@Ajga2U&1x zC!^@o`AxK2F5}D$bgp4{Z_7>ea{r>m@onmpreoGUh#_$=ay+Q%j_V77PbTAhX6z`P z8-vcEGcTi)lig}xH|(?-ZHhcqiNt4qP7&y_H2;by#dZb#;tj&Sx-fiGyJGVa6Ei80 zIIoqFu;KJ;P}QNuB5}afWL%x9fx3kMckawBXYQ!+!Uv*{p^4@uJn3n-)#sxmk1Ltx z+m36N$i*tfiv&!f>{he{xGMa;1+6Y(>hsrC6Xt2_he>!E0v@cHHT?aSpeR+Oz_NjV zOJhJDy+h%pBzye<@>>jd9&@f|6`rPuUDbL+HBdeD~L8A>ug`4k9S)uz|q7s#d7Pcuh4cLnpzb zYici}d5EMt+-&82zN(PcXu>e?u6;w_6rjFKw%NUiNC+vTS$H6-A)Ub~RjGIAf0Zte zae#_(vd~NRI@vJ!N+|i}NK=OSq#$tg#CF}x` z{?Ode!$+?>TO9dJQ6~zYZRXXij`iE_FVltds|p0!w=7Js2PC6^AeO(Jm))>HufK$9 zrHdQ%-?%^Z9=N|OYx3>J{`VCxnX&pBRg6Cl0|8^@Z;ye6aS}N}qEx~T`q6}yg|7k! z{!tp$k{=DG-kYaZ26f<&?rEgSb+}$@K3an6H`#{o?0krB7H(dku)m5jQPTGQ&2H?d zi!b?AeHEKbK$Zf;7ZJ zL4tjb9)wZ})EgSs8PraD$vrZE{J!x7t*F6u-(}dQrA8XTh0!t|HLt}SyBg^8uHPwy zt{W>|(fj-v;i_3<_D&&6YK;q?!R@`n?;!ID!nSzKr&;ZLaZK z><1$4bKp6HTA~D|p}SLyBQuiHNdxO{z`p0x*X7f9CwX5P1Y@}dp2eZVtmms3fwHJFcmCwiMd@I`QYoTG5>Pe1~f(7m09GL5s%s(qP z`5#GHt^ast%|!D;wW>ggm!K?jyD8qT)wYmeg&4iD6-T@)m8}+pqZV7h`y0OY)+D(1 z%RmP2V?JqC?1vv7vEvpBS%-a#Z*+UA<3d{BHYQFpYeHJjqGxwL18KC65+QTs{3=)+ zsy(ym)YcE(SBYWuEV`wPHQh+5Zgub*n#!=2egeVS-=K?&nQzC)1(f79jVqhQ6R7=t z&40S^)wV=dFT$a1A25F~yqNk&m{3OX${_$%QhJc!fI)bS9Rw9T8O-Fh;rk^8k6u4XY26VSlNpug zY7~5z_tf*wj)+c0L>eJHhWMTqu9@QBmm;tXUb#pDsL+ZImXtZuqg>cY30@f93cw`> zeKU4%3XbiyhwpDB$o2}agw@*j;i7E^XxMKX?W>T=XtU{A36xslf}YZOa9wg9Hb5;l zT<$njK?_sUd`@#DJ>zhBPerD3cXc}H!+k98th_}(w! zhILs-0~;3ghm(W}$!CD-evh3dV@1Z`m70neZs9`>VKjWKd)tW-bI@gW*n4X6R+>Rn;$_v?dO4nN&bYUUqD98QY|&j|!qOfV zdm5ODW`i0i{=tM4BOiO+kq&f&uY@ULCzCgr#g&hLYr@_tLIqM{oK8+qiVzKP7lwiu z_VJ|wd9$Fbe-io?j0vGry64Ho)T7TU5sk_4t+Xu;34hMp@pD3~^Hb19)k^_$*S^mN z$+%2j_P@P)KWtUuc0Iq{Q!VW=+~f+ISkn69w^7x`1G6Zl0n-^n{?`Qd%(z{#l!lL} zt#c##Cwbx?#2sw07HC)9=*S((X<9;dgT|h4=d|N7xr$1C&Qr0|>laTkYr}xohm6)lavSVsjEHvE7Vz%69fy{HJVKS6Nq;v65^0<*i0Xd zVfvGVV4M`oUR9{cpQd^fFj+~p7_jlg=@qWjO@(96{UUOV*x;lwm5Nx^;pd&Hlxs6N zep71JM2}A2N6IEWth+ z3S(hs*P+mnR3Wvhk^-4aW`!f#*qj|B6M0$n2d)e4F4ipXM;cZAOMN^*8P(!+Nge|nJAu{mF2yIvB; z=Hz?$s#|-@XWLk_IU`{Sv>$nP)?~i*OPwU5g-|4WQcIoY(kb?bn{LCH;jS=d7 z4T81+1Q)G@>wsk?rZ zw6|GW?CL#i-J0OX9EOTZ@~|&2QP z&A|750|QJMg(a765g7}qTp`~s@23+4A(-2Y;Gkt7bZB1IJO7>dksJp4X;+xZkad!p!X8Qvp_i#7 zSBSvL^yWLoVJc7yvRtzKh9EMq3oI23eLj;hU_HDNNj?cgbGkLF#A{~db1_^z;BvcoqW2{MU zlQaFPF5iJsZsLkCKr)%Y=9G|PI!6vSB#QpUZKj7xb>wX`M+k&{mrn>eNAGXpxbp`p zNjV~8UB;vyN>?6@Whd4-EZkyeGpx{i(E(?ftgd&?m4boupZZ%r;iI7qldRHA$>~Db zg`yps|NKL|F3${hXr z=)e$%q29Q21(lEFgV$GQs93tkvaAq!{eMQ6l2p7+C?^=dDsLtv!azax4@tL2Or606>+JlfRX2`ag6LB$gK(c`$ zf2(#gu@K55XHt_l^gAWJro;F}>^i=rshL#XrTJ3jZ^G3TX@VnPioduDNtWpE_>oN^ zLXj1ME{g|ng%M?2=fuKyC1SaZV3+kAzkkQK-)1qX==~kv>k?v3nqG75Pxa0Y>9tK< zsVJ70UzJ~Nz??@dC_*hCB`vKWuaCc18T+lWASDB3+o-TPo3dsKH>zPb8JAT!_3h*W zN1Z9alsWm#HmbZk6O(9B9NWzChj)@Xri2@`pd43ah+0}uuLQnO#QjrzN<^WaqaW=0 z0PK3tXxvhI(cE!7YSX-Q%p08K_i&Y(mIAWvp7iSF(xg`@(gKLmQKa|kzd_#j|MffH z`EyQYlifSdJonC>J9o}bve%|@h1ov$o3buZqite60~~7gpg{xqGGsx8p<9yRE`hI` zEfrnzphu3-y~xzxfT_F>p|)X$8!1{|S|pZ>ovCc}_n^cKy*JXi#d4O=3~`YiR`Feg+`I9Rh}fDP!+m z0I@}sjzVLsYgSfF7oj{RXR`77;x7l=4;3-XVhBee@NYY*%NgJY&oH@EgB?}CcfS}Z zby!EG@$QjNfEeqLV=*IG3Zs5lZ%F^MLQ3iwhjtf5$^^i=B8dd-0uVHyjImAUonvdeY7p&`A1teMgOl!GXJn>{) z?U9GcJvN&!Xkk{E=vW}q(NWhgGk@XDyuj#tIh}21@;kg>>f0TL_TbMJoqJv-AGXxK z7^-o7#x|L*?oLKRbChnt?aq4kmI^5MMfW=hD@QOvcJ?Uht-W4l+f7%L;vx;)+@OBm zd;Qfrkxcb;1)ofnh1wi#>u$Pc=q)G8SVS>#a@z+c9%wi%5Ow=1E##&cgI21~YVJ(| zjz{8A`D%Veh)>>=XfQG2-5htV-hz0qE*^gNnCIAaKA}C}2e6$dSzh5|BL?0`0-Ewn z&s`b3GcUJo64q=}&OZ(G!39@G=Glc5AMJ-G=LbJ|sb!Pv@s&M|bWpxwAq`lcm~fuq z2VxPpdb}D~g}T&aq{~K4i@0ujC&x4 zrmvEC+9;)4P6+{ft8T-6rSZp;Ul-9r@p;DWkG^DYF2~s@*ERk)>yxP$vfyP9Eer`Z zI*cWCugaf%$upMSIqHHH~!c1OXDi=j{CxkJnas*{Gp8*Yx$}N%E`P6 zQheETOrniF*L62|NMa{2v{`O+L~0+KkR(yJE5SYyV;Jj~bG^eOnqQdWf1BxXfp5o_pie4*4QP<`WCG(m~bqm^EI4!5+?;LO723q$u_^$<&u@mQvpG2$8 zf4n!CXq2)?2DI^kI_WpM(*Z^WU$N@sQ1B*^m4r+Cs5++Ty%Mzz6RgWAeE{ec?TNn= zAw@BTvQ~-Z+L$#RAF5HUCkCTD`ZWD!Lb&U5@|T&d2YAbe5uFb))|wO5q{tCny?FLi zk8cw6ofsaI!IjueM&zxyU5mKfd&;(IU-ziSP*bQUOIDg>l6DGnH||(S`XJ2sT9TU@X1W}*U_q@>|(e@sS$mY{Yv(!BW^|O-5;wFYw zF=mxwl#hkfaim+Ylaa{XV?jygwsKxm+UwBLZ@6xpd$8uX5U%q11wN!pA0tW`)43fV zfO$vdpfm5;WC9ufwXgBaWXw0+j-F83yleyyNV}ntA1|y&hT?_^Q-nkvJ2+?MZ?DpG zYThG=9i@@Kv&i20BEtDLhy8Yg7jHJlf7iyA!h29{)uTYrD&&_VF=yN0emmvX#?cZ2 zlZU?}%R^IeMuml(k~h$kg5qVazK83{mzf2@LQ?X*qFyW0f+`hMM-A z?O|~mDQ|EVJ_kka+}(uA-HJP*DGrj+DjXm;v7)U4lM5SgS%Gi{J+<`6c8ZnY41Ek} zP5H|ld|1HSZN770E}YTe+%|+{BRh{@;o>lfG!4UQ z4#-sp1;)Jm!TxEz4|e^}TNgNo$$qX2ao&@D{?*Gr-R9@Sg0jl*g-bsWqHmSEJuM6Ke5-#2V79q>xl+G)g92`GUqF`nM ze&R%HPSQIJ%J({jfY)DyctAidL4>qkLBH~#>{pM({^n%$X0wB=Ho_xR<%neZ?8)F# z7<DkPQAbmu%ibfCJ*(|a4)9@9-s>J_1YBtoy-E-Xob5SFUG@rcQyD;VV4s2& z8ST*fpv2w!SroDujq(89f6qHS4Wl=$#U_PWFIgq%w;St0fVsCIi_qEzUSzUI@DQ>j zj5riI!Ug8o3&b>O-qt3;)d1#!PHrnf7Y@QI4o7I=dn`ejVT7@RlHwXF>v)+!IfE7Zq(ia7lnbKW84>#h&7Hl zrq|4UE+bSci`ke^TWYP?vK&#rb7mhaWFl2U-`|i#FLB;>jK775RgIs;v7b!09Mg=x zwB!tKZpg|n{n^HBfhg9=<7sp$Ulu_(m!1> zQhpn!g7(Na3*`y4Eu#X(EsK47w=*n@>-bcB?fuL-!l)uU-+fUtJ4Avt?CKTnB^Wh~ zbM}hQOBYe<=M3NNBm1IhdtY+y!8^(mc~li~edMs(58oZz6gc*;wOT_NVO`-i-}~1X zgt~OOYs%-g0)hp5w3pIzkPIg{v?p;+aNABaXRmLz<;UA6{eEg2nX|mq$Ra6S>WP_S z)M7f*sc@;~U2sFajZ9ePj8Q}2j>Q!=ZH@X0^2)eA%msxYaw=px3h_9l-}8q-|36d$ zx$FbB;ijNY*8ZSQk0mWqXuQ(y}NOU<<_{378b9;*S=UxrBOnnDQyR$sra@pS}XoAUDFsBog2vt7I~>31@XSs z?S{FwGZA;E>rlk`N|&()UV{5Bh4z~J*O68|c|Z%Ju{WQsyIfA({}p|@6?xYWVvc%v zclK2sH>E!!&fJs{-xOf(UES<+_RT}HS8vFm_Trghvyq24F>ciPg=&3iog~^RS2~ky zyF8tpRfGHA@z|e=Pd+E!w;5E)x9wPemof?=3@v+glWsmgb*NCA&i<^@+M}uRxc=&o!r5 z@zJ8ei{GaIW{aD*!FSbfKi&y4DOWA?Fpf!?TVNy3U`IGn!1 zu(h^0`5>xK>sjTi3Gt%tn+l?JzS3UCB{cQ+vvgujYgg<~ohpyN)JG9=laryq9JpBF zb-4b$9aqb8QWmC%_xBgP2=@?&-?bv@zUye8&Cw`htpFzUqxkPn$|}(g&V!=B*|n<=lV>) zwUijoCf%_s9D_+X!`#%z>CE){*+P8n2i4Fa$rPl31x*Alh?Ua%iGiZvyx$_1SRu>f zQXJcQ0~y3_ifg8?g;Mvigwb_<>#0lu_V$EG*`*l#&NXrLmI;-QtOcC2pyTyRbNbk! zYOOS}$l_Uk=M;A2&^3zEP}&D0@8TP$`ZCW*IjtFTJBak0n%ETN5|MOeW{6dNeND78 z7;9p5fW;@Vvbw8Z2tQ;~QU9!b>q48!&X2;|D_vFOerT<)>SwpkR=-+MuVfK1Ncr^S z5V+>;QF#eTkEY`trFuR@{M?hwk|MU}oADM+YHot<&>|#S{*tpm_5jh zn5T9eb6_f0czlxbJTfi1237XSZN8OHdyXD6k~-#A_#7S8$ko!%zjbHpU0$F2;Wu^8 z5qFZl5@I|}@!Jo&yrjt|ZaT)D_UwAHS#nmA0_kmc@6Oi@5yBuMNB`Prd@3~TZ!#+B z+7hv#z$T;$E3YTfju>L&)Jmtam&bL6u;kdnvdO>t3S1BpjT$Y5?qtn+`lyL(o-p{V zDW~i1IEnVnvuSODnxtq$4L+xW{creLL_0dxmvS<;@#_5W!zrvX5lCa3;6M3*91O$NRFS+p>O;YQM%XR?}pPj#3MMMG&1 zIVosgX{=-!cH72ywCpB>kA7E<@>|TLrKmRb1!W$YlYaq&<7ZJq)RWPa>Vkji%B9@< zSj5;c=&^oP>y)WKA~xhK@!a*E!O3QNi#Tj>r+q_AEu*-~w2TmcBXG-y?VIQ3>a>eF zTBo`Ek?8|;hXOq;%H;-wK*rRoXVj??Mr-)5iKR-lE>VUI5CI+v)%}$LkF|9+&8b+Y zbMcXvBfb#z5(x;kJ!%qa^Fi8Jd)E54CCrQ9d?P#Ug|B{$p4*jd#GECe4#0$XG8B+0 zg;o!&i#=^g_vCE}@JEJLSKic+qf1+!N8gay1@{VM-;l|D>&I}-^MD(j7-xB=aqKf| zO>+rFwoci8tp!428&^VsxFDozNL$0Heo|$h!W>IKlmT_Nfv{JFuz}b}s?yUhKMb1Zz%`rsdj+pmMAHRRRPA_Xi3ASE$_%yaiPVKgcjfd&psPho z{lpi?r)b7YyS9=BPdZOE|wr;G=%?;?|bXP4o>;!QNe#QQbQ&7qj9*l6Gv|A2!d1+Pv2vxdS_8 zII?yrvKywO%pB9PA!q(=_}N;%^y!_4OkFsCT#sI4Zz%pH&GrlI-PNJ_h=I;5KR*^C zrjx}{61x2qZMZoR-O~!|Ava)_sk0a2lXJ%}s$`nJ@N7utB$H=yKcLlPdv^w1_Dy&h zZ%SPnBJWr>!>eq#c1tAJRorr5e>i%L@5!avvQ|MM*3T84=gO!rF5}IqOMT_9$ZB?* zn%q>l`RT*P3731cqyz4!4C}m1S6y}g5sN*JV3=s-P#^8#{wJEe|XykSt$U29`3>B;8@23%E6n&k`!Vx^Fs3Le@BG`_A|H)w+b7Z+8Kx z18%_ER4g84Q#9moC713ldnkpC#O&N^F3GwQ=4YP9`fa!*r}R)k^+I$jDG!%c%-P5G zlPv4+zs$&R!D=K5!^>ZPPKeKGVXP3vn)Bu-Dyo=9mTYZ8{KrBK(uz7=(Y_sF6jcee zeV3{LFDMbo;4FvJK*;xE%`J|!cJgJWIYy7Gschv6`E_C(HKzVwT_Ti1CiUy3n{WM(vyIMAs5e2>sO2pdI5skR%f(BaZ#5`do}7rVL$Qf_O!0s z?RTOgqcoz+2M^C(S8Oj0Lvt&>cje}7)Jlk`2p#fR7?}iiTLN!8zj!%`V8RAzOF4*k z)nYoF>ixfrsw=;&=kvNcL~-v-`T40_xZ^^VimTrU(c4_Rm=w;z!%8SMwyv1VMoEP0 zOPe;mLQT$ta<1$T8?mo44qR0y3iBVLJL!#$OFK%!XE)xlhnvi%yP+2%8y2=N-gb{% zkhXpPb~lCiJ`Am_!Jtk?r!X2#Z`9g8@+;=5!^3+xpq;C#heDkc2fvF*YsQl2kZX%5A^<&cm5SRNOdLq1^@r$NN&ExfGR>7eNM&+omtnj)R) zY(CR6QOYJZR#X{It;~nsPRWTX5J_e2Dpb0{KH%nIm9N-MFEVn`uAH3;M?Ty{$5@PK zJI(D?@|JY7ss-}8z;x9oqw0+RbT84*n>f}8;SKy0{RZV$LKq|SsPO9aI*E+n0K_!o z+Uc5gY5q3>jOEO+J6gFJN07NKeyLreig z)$g@pg7m6d`uuaWc)qpA1}-+>0u~H2FbR5Ux>5z%0j9DxB3O6P$TaV1FI(0Y5y=yJ zi&@b=R~sX<<)T})Y8_?A{O(^ZoaD%bSwHvKF5!YN=TB$Qw5u0T-DpbNkhwaxQ$ z!9Z!|MNGd8Cm?ef%~n$E>|EO^& z%y}24;FZWY=RP7PFC^L$|J@oX{m*Z zOtI+eEI@k+C9H(IAuVr+TK03EpxSA6Y%f$cAQ1@Mg1h%=&kEjPlk`aKO3JG*kV&NK zJU9JxfC@NV$47E6EP9HDJ)Zw|C2CD{fi=0An;8L2oT}U4hN0ItysXE65#LmY5YZ9; z?~XkyTyL-}R*o5}2q$dd<0LnFb)N(PJV6OIa9iI$uXG=G2-b%MdM0`s0*%avkPG|` zG!;C6)H?wHNn!xN@=rDJnC`<&dQ>w~gY+bpk_CF|s3Ff(pGc-;02rns0hs;}&!IjN z$7--Z&mM^mkueVkg2;D80D$=q(O>xlQC0l zh$8yiO!QgU99F0RJAu-qhj4Zu835ei{Tr+G4FtQ)45h<%XF@2k%xuR-DLSZ~N@oXv z+e-id9{zo$`;6pcmD!*|N3ff_wUatr0Pv&%02u$3Ay~S)_ZT*t4N7|?yXL-}Bm)xd z2H$_$PGtvz)p8u+MK7BL2uq{9EED{Md*7 zJ3mzzmXjUId(>ueLOOSq8UW0&69Mo)`lc36jP-^Qvtz^Ap{I^y?fj|&-jD-;KgjXV z5%a;0m|z{yJ=mdVk7R4VlMeTR8mEC{6Y&Rb!ee5B)j6=dh-2LU%k)p&0%u~Z*%M+` z!M_JDhd(~Hk6_GGf5Y>-9KkbSOA*J05V&@VlRpRmUds~y<)qT?*d@fVlMb8xPz?pi zUZMnmbAJ%dA|b&h6Ok}t^*D|RKUSp!%4Pvz=@RK*!_$_6 Date: Thu, 29 Oct 2026 18:50:11 -0700 Subject: [PATCH 3/3] Organize PCB STEP exports and the shell by board version STEP exports move to PCB/step/v1.1 and PCB/step/v1.2 (the new V1.2 export with the second bumper button and SOT-23 hall sensor), and KiCad's STEP export path points at v1.2. The current shell, built for the V1.1 board, moves unchanged to shell/v1.1; the Fusion lib.py data path follows it. Co-Authored-By: Claude Opus 5.5 --- PCB/snips_controller.kicad_pro | 2 +- PCB/{ => step/v1.1}/snips_controller.step | 0 .../v1.1}/snips_controller_color.step | 0 PCB/step/v1.2/snips_controller.step | 575819 +++++++++++++++ shell/{ => v1.1}/export/_export_log.txt | 0 shell/{ => v1.1}/export/print/README.md | 0 .../export/print/step/BatteryPanel.step | 0 .../export/print/step/BottomShell.step | 0 .../export/print/step/BumperCap.step | 0 .../export/print/step/FaceCap1.step | 0 .../export/print/step/FaceCap2.step | 0 .../export/print/step/FaceCap3.step | 0 .../export/print/step/FaceCap4.step | 0 .../export/print/step/FaceCap5.step | 0 .../export/print/step/FaceCap6.step | 0 .../export/print/step/HallBridge.step | 0 .../export/print/step/PowerPlate.step | 0 .../export/print/step/SidePlateL1.step | 0 .../export/print/step/SidePlateL2.step | 0 .../export/print/step/SidePlateR1.step | 0 .../export/print/step/SidePlateR2.step | 0 .../export/print/step/TopShell.step | 0 .../{ => v1.1}/export/print/step/Trigger.step | 0 .../export/print/step/TriggerPost.step | 0 .../export/print/stl/BatteryPanel.stl | Bin .../export/print/stl/BottomShell.stl | Bin .../print/stl/BottomShell_with_buck.stl | Bin .../{ => v1.1}/export/print/stl/BumperCap.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap1.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap2.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap3.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap4.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap5.stl | Bin .../{ => v1.1}/export/print/stl/FaceCap6.stl | Bin .../export/print/stl/HallBridge.stl | Bin .../export/print/stl/PowerPlate.stl | Bin .../export/print/stl/SidePlateL1.stl | Bin .../export/print/stl/SidePlateL2.stl | Bin .../export/print/stl/SidePlateR1.stl | Bin .../export/print/stl/SidePlateR2.stl | Bin .../{ => v1.1}/export/print/stl/TopShell.stl | Bin .../export/print/stl/TopShell_with_buck.stl | Bin shell/{ => v1.1}/export/print/stl/Trigger.stl | Bin .../export/print/stl/TriggerPost.stl | Bin .../export/print/tools/build_sup.py | 0 .../export/print/tools/export_print.py | 0 .../export/print/tools/export_print_cfg.py | 0 .../{ => v1.1}/export/print/tools/gen_buck.py | 0 .../export/print/tools/gen_supports.py | 0 shell/{ => v1.1}/export/print/tools/orient.py | 0 .../export/print/tools/step_orient.py | 0 .../reference/step/ContactClip_Revolve.step | 0 .../export/reference/step/Contacts_Block.step | 0 .../export/reference/step/PCB_Reference.step | 0 .../export/reference/step/SpringRef.step | 0 .../reference/step/ThumbstickKnob_Ref.step | 0 .../reference/stl/ContactClip_Revolve.stl | Bin .../export/reference/stl/Contacts_Block.stl | Bin .../export/reference/stl/PCB_Reference.stl | Bin .../export/reference/stl/SpringRef.stl | Bin .../reference/stl/ThumbstickKnob_Ref.stl | Bin .../{ => v1.1}/export/step/BatteryPanel.step | 0 shell/{ => v1.1}/export/step/BottomShell.step | 0 shell/{ => v1.1}/export/step/BumperCap.step | 0 shell/{ => v1.1}/export/step/FaceCap1.step | 0 shell/{ => v1.1}/export/step/FaceCap2.step | 0 shell/{ => v1.1}/export/step/FaceCap3.step | 0 shell/{ => v1.1}/export/step/FaceCap4.step | 0 shell/{ => v1.1}/export/step/FaceCap5.step | 0 shell/{ => v1.1}/export/step/FaceCap6.step | 0 shell/{ => v1.1}/export/step/HallBridge.step | 0 shell/{ => v1.1}/export/step/PowerPlate.step | 0 shell/{ => v1.1}/export/step/SidePlateL1.step | 0 shell/{ => v1.1}/export/step/SidePlateL2.step | 0 shell/{ => v1.1}/export/step/SidePlateR1.step | 0 shell/{ => v1.1}/export/step/SidePlateR2.step | 0 shell/{ => v1.1}/export/step/TopShell.step | 0 .../export/step/TopShell_with_cavity.step | 0 shell/{ => v1.1}/export/step/Trigger.step | 0 shell/{ => v1.1}/export/step/TriggerPost.step | 0 shell/{ => v1.1}/export/stl/BatteryPanel.stl | Bin shell/{ => v1.1}/export/stl/BottomShell.stl | Bin shell/{ => v1.1}/export/stl/BumperCap.stl | Bin shell/{ => v1.1}/export/stl/FaceCap1.stl | Bin shell/{ => v1.1}/export/stl/FaceCap2.stl | Bin shell/{ => v1.1}/export/stl/FaceCap3.stl | Bin shell/{ => v1.1}/export/stl/FaceCap4.stl | Bin shell/{ => v1.1}/export/stl/FaceCap5.stl | Bin shell/{ => v1.1}/export/stl/FaceCap6.stl | Bin shell/{ => v1.1}/export/stl/HallBridge.stl | Bin shell/{ => v1.1}/export/stl/PowerPlate.stl | Bin shell/{ => v1.1}/export/stl/SidePlateL1.stl | Bin shell/{ => v1.1}/export/stl/SidePlateL2.stl | Bin shell/{ => v1.1}/export/stl/SidePlateR1.stl | Bin shell/{ => v1.1}/export/stl/SidePlateR2.stl | Bin shell/{ => v1.1}/export/stl/TopShell.stl | Bin shell/{ => v1.1}/export/stl/Trigger.stl | Bin shell/{ => v1.1}/export/stl/TriggerPost.stl | Bin shell/{ => v1.1}/fusion/SnipsShell.f3d | Bin shell/{ => v1.1}/fusion/lib.py | 2 +- shell/{ => v1.1}/fusion/sc_features.json | 0 shell/{ => v1.1}/fusion/sc_sketches.json | 0 .../photos/snips_shell_01_front_left_top.png | Bin .../photos/snips_shell_02_rear_right_top.png | Bin .../{ => v1.1}/photos/snips_shell_03_top.png | Bin .../photos/snips_shell_04_bottom.png | Bin .../photos/snips_shell_05_side_left.png | Bin .../photos/snips_shell_06_side_right.png | Bin ...nips_shell_07_front_end_bumper_trigger.png | Bin ...snips_shell_08_underside_trigger_belly.png | Bin .../photos/snips_shell_09_rear_usb_end.png | Bin .../snips_shell_10_thumbstick_buttons.png | Bin 112 files changed, 575821 insertions(+), 2 deletions(-) rename PCB/{ => step/v1.1}/snips_controller.step (100%) rename PCB/{ => step/v1.1}/snips_controller_color.step (100%) create mode 100644 PCB/step/v1.2/snips_controller.step rename shell/{ => v1.1}/export/_export_log.txt (100%) rename shell/{ => v1.1}/export/print/README.md (100%) rename shell/{ => v1.1}/export/print/step/BatteryPanel.step (100%) rename shell/{ => v1.1}/export/print/step/BottomShell.step (100%) rename shell/{ => v1.1}/export/print/step/BumperCap.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap1.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap2.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap3.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap4.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap5.step (100%) rename shell/{ => v1.1}/export/print/step/FaceCap6.step (100%) rename shell/{ => v1.1}/export/print/step/HallBridge.step (100%) rename shell/{ => v1.1}/export/print/step/PowerPlate.step (100%) rename shell/{ => v1.1}/export/print/step/SidePlateL1.step (100%) rename shell/{ => v1.1}/export/print/step/SidePlateL2.step (100%) rename shell/{ => v1.1}/export/print/step/SidePlateR1.step (100%) rename shell/{ => v1.1}/export/print/step/SidePlateR2.step (100%) rename shell/{ => v1.1}/export/print/step/TopShell.step (100%) rename shell/{ => v1.1}/export/print/step/Trigger.step (100%) rename shell/{ => v1.1}/export/print/step/TriggerPost.step (100%) rename shell/{ => v1.1}/export/print/stl/BatteryPanel.stl (100%) rename shell/{ => v1.1}/export/print/stl/BottomShell.stl (100%) rename shell/{ => v1.1}/export/print/stl/BottomShell_with_buck.stl (100%) rename shell/{ => v1.1}/export/print/stl/BumperCap.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap1.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap2.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap3.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap4.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap5.stl (100%) rename shell/{ => v1.1}/export/print/stl/FaceCap6.stl (100%) rename shell/{ => v1.1}/export/print/stl/HallBridge.stl (100%) rename shell/{ => v1.1}/export/print/stl/PowerPlate.stl (100%) rename shell/{ => v1.1}/export/print/stl/SidePlateL1.stl (100%) rename shell/{ => v1.1}/export/print/stl/SidePlateL2.stl (100%) rename shell/{ => v1.1}/export/print/stl/SidePlateR1.stl (100%) rename shell/{ => v1.1}/export/print/stl/SidePlateR2.stl (100%) rename shell/{ => v1.1}/export/print/stl/TopShell.stl (100%) rename shell/{ => v1.1}/export/print/stl/TopShell_with_buck.stl (100%) rename shell/{ => v1.1}/export/print/stl/Trigger.stl (100%) rename shell/{ => v1.1}/export/print/stl/TriggerPost.stl (100%) rename shell/{ => v1.1}/export/print/tools/build_sup.py (100%) rename shell/{ => v1.1}/export/print/tools/export_print.py (100%) rename shell/{ => v1.1}/export/print/tools/export_print_cfg.py (100%) rename shell/{ => v1.1}/export/print/tools/gen_buck.py (100%) rename shell/{ => v1.1}/export/print/tools/gen_supports.py (100%) rename shell/{ => v1.1}/export/print/tools/orient.py (100%) rename shell/{ => v1.1}/export/print/tools/step_orient.py (100%) rename shell/{ => v1.1}/export/reference/step/ContactClip_Revolve.step (100%) rename shell/{ => v1.1}/export/reference/step/Contacts_Block.step (100%) rename shell/{ => v1.1}/export/reference/step/PCB_Reference.step (100%) rename shell/{ => v1.1}/export/reference/step/SpringRef.step (100%) rename shell/{ => v1.1}/export/reference/step/ThumbstickKnob_Ref.step (100%) rename shell/{ => v1.1}/export/reference/stl/ContactClip_Revolve.stl (100%) rename shell/{ => v1.1}/export/reference/stl/Contacts_Block.stl (100%) rename shell/{ => v1.1}/export/reference/stl/PCB_Reference.stl (100%) rename shell/{ => v1.1}/export/reference/stl/SpringRef.stl (100%) rename shell/{ => v1.1}/export/reference/stl/ThumbstickKnob_Ref.stl (100%) rename shell/{ => v1.1}/export/step/BatteryPanel.step (100%) rename shell/{ => v1.1}/export/step/BottomShell.step (100%) rename shell/{ => v1.1}/export/step/BumperCap.step (100%) rename shell/{ => v1.1}/export/step/FaceCap1.step (100%) rename shell/{ => v1.1}/export/step/FaceCap2.step (100%) rename shell/{ => v1.1}/export/step/FaceCap3.step (100%) rename shell/{ => v1.1}/export/step/FaceCap4.step (100%) rename shell/{ => v1.1}/export/step/FaceCap5.step (100%) rename shell/{ => v1.1}/export/step/FaceCap6.step (100%) rename shell/{ => v1.1}/export/step/HallBridge.step (100%) rename shell/{ => v1.1}/export/step/PowerPlate.step (100%) rename shell/{ => v1.1}/export/step/SidePlateL1.step (100%) rename shell/{ => v1.1}/export/step/SidePlateL2.step (100%) rename shell/{ => v1.1}/export/step/SidePlateR1.step (100%) rename shell/{ => v1.1}/export/step/SidePlateR2.step (100%) rename shell/{ => v1.1}/export/step/TopShell.step (100%) rename shell/{ => v1.1}/export/step/TopShell_with_cavity.step (100%) rename shell/{ => v1.1}/export/step/Trigger.step (100%) rename shell/{ => v1.1}/export/step/TriggerPost.step (100%) rename shell/{ => v1.1}/export/stl/BatteryPanel.stl (100%) rename shell/{ => v1.1}/export/stl/BottomShell.stl (100%) rename shell/{ => v1.1}/export/stl/BumperCap.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap1.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap2.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap3.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap4.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap5.stl (100%) rename shell/{ => v1.1}/export/stl/FaceCap6.stl (100%) rename shell/{ => v1.1}/export/stl/HallBridge.stl (100%) rename shell/{ => v1.1}/export/stl/PowerPlate.stl (100%) rename shell/{ => v1.1}/export/stl/SidePlateL1.stl (100%) rename shell/{ => v1.1}/export/stl/SidePlateL2.stl (100%) rename shell/{ => v1.1}/export/stl/SidePlateR1.stl (100%) rename shell/{ => v1.1}/export/stl/SidePlateR2.stl (100%) rename shell/{ => v1.1}/export/stl/TopShell.stl (100%) rename shell/{ => v1.1}/export/stl/Trigger.stl (100%) rename shell/{ => v1.1}/export/stl/TriggerPost.stl (100%) rename shell/{ => v1.1}/fusion/SnipsShell.f3d (100%) rename shell/{ => v1.1}/fusion/lib.py (99%) rename shell/{ => v1.1}/fusion/sc_features.json (100%) rename shell/{ => v1.1}/fusion/sc_sketches.json (100%) rename shell/{ => v1.1}/photos/snips_shell_01_front_left_top.png (100%) rename shell/{ => v1.1}/photos/snips_shell_02_rear_right_top.png (100%) rename shell/{ => v1.1}/photos/snips_shell_03_top.png (100%) rename shell/{ => v1.1}/photos/snips_shell_04_bottom.png (100%) rename shell/{ => v1.1}/photos/snips_shell_05_side_left.png (100%) rename shell/{ => v1.1}/photos/snips_shell_06_side_right.png (100%) rename shell/{ => v1.1}/photos/snips_shell_07_front_end_bumper_trigger.png (100%) rename shell/{ => v1.1}/photos/snips_shell_08_underside_trigger_belly.png (100%) rename shell/{ => v1.1}/photos/snips_shell_09_rear_usb_end.png (100%) rename shell/{ => v1.1}/photos/snips_shell_10_thumbstick_buttons.png (100%) diff --git a/PCB/snips_controller.kicad_pro b/PCB/snips_controller.kicad_pro index 79fced4..aa47fad 100644 --- a/PCB/snips_controller.kicad_pro +++ b/PCB/snips_controller.kicad_pro @@ -548,7 +548,7 @@ "plot": "production/gerbers/", "pos_files": "", "specctra_dsn": "", - "step": "snips_controller.step", + "step": "step/v1.2/snips_controller.step", "svg": "", "vrml": "" }, diff --git a/PCB/snips_controller.step b/PCB/step/v1.1/snips_controller.step similarity index 100% rename from PCB/snips_controller.step rename to PCB/step/v1.1/snips_controller.step diff --git a/PCB/snips_controller_color.step b/PCB/step/v1.1/snips_controller_color.step similarity index 100% rename from PCB/snips_controller_color.step rename to PCB/step/v1.1/snips_controller_color.step diff --git a/PCB/step/v1.2/snips_controller.step b/PCB/step/v1.2/snips_controller.step new file mode 100644 index 0000000..68649a2 --- /dev/null +++ b/PCB/step/v1.2/snips_controller.step @@ -0,0 +1,575819 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('snips_controller.step','2026-10-29T18:41:47',('Pcbnew'),( + 'Kicad'),'Open CASCADE STEP processor 7.9','KiCad to STEP converter' + ,'Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('snips_controller 1','snips_controller 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215, + #219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267, + #271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319, + #323,#327,#331,#335,#339,#343,#347,#351,#355,#359,#363,#367,#371, + #375,#379,#383),#387); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(142.,-127.5,1.595)); +#17 = DIRECTION('',(-0.,0.,1.)); +#18 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(142.,-149.5,1.595)); +#21 = DIRECTION('',(-0.,0.,1.)); +#22 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(142.,-127.5,1.595)); +#25 = DIRECTION('',(-0.,0.,1.)); +#26 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(137.5,-112.5,1.595)); +#29 = DIRECTION('',(0.,0.,1.)); +#30 = DIRECTION('',(1.,0.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(151.35,-61.75,1.595)); +#33 = DIRECTION('',(0.,0.,1.)); +#34 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(137.5,-121.25,1.595)); +#37 = DIRECTION('',(0.,0.,1.)); +#38 = DIRECTION('',(1.,0.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(137.25,-130.,1.595)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(134.73,-131.25,1.595)); +#45 = DIRECTION('',(0.,0.,1.)); +#46 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(147.75,-121.25,1.595)); +#49 = DIRECTION('',(0.,0.,1.)); +#50 = DIRECTION('',(1.,0.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(150.5,-152.75,1.595)); +#53 = DIRECTION('',(0.,-0.,1.)); +#54 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(147.75,-112.5,1.595)); +#57 = DIRECTION('',(0.,0.,1.)); +#58 = DIRECTION('',(1.,0.,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(141.,-129.5,1.595)); +#61 = DIRECTION('',(-0.,0.,1.)); +#62 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(134.75,-130.,1.595)); +#65 = DIRECTION('',(0.,0.,1.)); +#66 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(127.75,-153.76,1.595)); +#69 = DIRECTION('',(0.,-0.,1.)); +#70 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(123.65,-61.75,1.595)); +#73 = DIRECTION('',(0.,0.,1.)); +#74 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(126.89,-67.4,1.595)); +#77 = DIRECTION('',(0.,0.,1.)); +#78 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(138.,-69.91,1.595)); +#81 = DIRECTION('',(0.,0.,1.)); +#82 = DIRECTION('',(1.,0.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(121.75,-90.5,1.595)); +#85 = DIRECTION('',(-0.,0.,1.)); +#86 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(145.85,-156.65,1.595)); +#89 = DIRECTION('',(0.,0.,1.)); +#90 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(124.1,-80.8,1.595)); +#93 = DIRECTION('',(0.,0.,1.)); +#94 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(144.25,-152.75,1.595)); +#97 = DIRECTION('',(0.,0.,1.)); +#98 = DIRECTION('',(1.,0.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(142.5,-133.775,1.595)); +#101 = DIRECTION('',(-0.,0.,1.)); +#102 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(125.28,-84.625,1.595)); +#105 = DIRECTION('',(0.,0.,1.)); +#106 = DIRECTION('',(1.,0.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(152.5,-148.1,1.595)); +#109 = DIRECTION('',(0.,-0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(153.2,-100.525,1.595)); +#113 = DIRECTION('',(0.,-0.,1.)); +#114 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(127.25,-121.25,1.595)); +#117 = DIRECTION('',(0.,0.,1.)); +#118 = DIRECTION('',(1.,0.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(137.5,-158.15,1.595)); +#121 = DIRECTION('',(0.,0.,1.)); +#122 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(143.75,-130.,1.595)); +#125 = DIRECTION('',(-0.,0.,1.)); +#126 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(137.5,-95.25,12.995)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(126.5,-154.,1.595)); +#133 = DIRECTION('',(0.,-0.,1.)); +#134 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(148.25,-152.75,1.595)); +#137 = DIRECTION('',(0.,-0.,1.)); +#138 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(130.25,-153.76,1.595)); +#141 = DIRECTION('',(-0.,0.,1.)); +#142 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(127.5,-64.88,1.595)); +#145 = DIRECTION('',(0.,-0.,1.)); +#146 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(125.375,-64.7,1.595)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(125.99,-89.1,1.595)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(1.,0.,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(129.,-153.76,1.595)); +#157 = DIRECTION('',(0.,-0.,1.)); +#158 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(121.75,-100.525,1.595)); +#161 = DIRECTION('',(-0.,0.,1.)); +#162 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(142.25,-129.5,1.595)); +#165 = DIRECTION('',(-0.,0.,1.)); +#166 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(153.2,-90.5,1.595)); +#169 = DIRECTION('',(0.,-0.,1.)); +#170 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(124.85,-86.3,1.595)); +#173 = DIRECTION('',(0.,0.,1.)); +#174 = DIRECTION('',(1.,0.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(127.25,-112.5,1.595)); +#177 = DIRECTION('',(0.,0.,1.)); +#178 = DIRECTION('',(1.,0.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(125.99,-87.9,1.595)); +#181 = DIRECTION('',(0.,0.,1.)); +#182 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(148.5,-93.,1.595)); +#185 = DIRECTION('',(-0.,0.,1.)); +#186 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(139.6,-147.29,1.595)); +#189 = DIRECTION('',(-0.,0.,1.)); +#190 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(129.,-157.95,1.595)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(1.,0.,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(126.92,-66.4,1.595)); +#197 = DIRECTION('',(0.,0.,1.)); +#198 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(148.5,-82.74,1.595)); +#201 = DIRECTION('',(-0.,0.,1.)); +#202 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(148.66,-133.7,-8.5E-02)); +#205 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#206 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(138.95,-117.,-8.5E-02)); +#209 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#210 = DIRECTION('',(1.,0.,0.)); +#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214); +#212 = CARTESIAN_POINT('',(149.5625,-117.,-8.5E-02)); +#213 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#214 = DIRECTION('',(1.,0.,0.)); +#215 = AXIS2_PLACEMENT_3D('',#216,#217,#218); +#216 = CARTESIAN_POINT('',(137.4,-156.2,-8.5E-02)); +#217 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#218 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#219 = AXIS2_PLACEMENT_3D('',#220,#221,#222); +#220 = CARTESIAN_POINT('',(152.5,-77.5,-8.5E-02)); +#221 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#222 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#223 = AXIS2_PLACEMENT_3D('',#224,#225,#226); +#224 = CARTESIAN_POINT('',(130.,-118.52,-8.5E-02)); +#225 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#226 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#227 = AXIS2_PLACEMENT_3D('',#228,#229,#230); +#228 = CARTESIAN_POINT('',(127.05,-118.,-8.5E-02)); +#229 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#230 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#231 = AXIS2_PLACEMENT_3D('',#232,#233,#234); +#232 = CARTESIAN_POINT('',(122.025,-110.,-8.5E-02)); +#233 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#234 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#235 = AXIS2_PLACEMENT_3D('',#236,#237,#238); +#236 = CARTESIAN_POINT('',(147.1,-131.5625,-8.5E-02)); +#237 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#238 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#239 = AXIS2_PLACEMENT_3D('',#240,#241,#242); +#240 = CARTESIAN_POINT('',(150.25,-126.8,-8.5E-02)); +#241 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#242 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#243 = AXIS2_PLACEMENT_3D('',#244,#245,#246); +#244 = CARTESIAN_POINT('',(151.8,-114.35,-8.5E-02)); +#245 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#246 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#247 = AXIS2_PLACEMENT_3D('',#248,#249,#250); +#248 = CARTESIAN_POINT('',(141.3,-77.3125,-8.5E-02)); +#249 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#250 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#251 = AXIS2_PLACEMENT_3D('',#252,#253,#254); +#252 = CARTESIAN_POINT('',(130.5,-105.5,-8.5E-02)); +#253 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#254 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#255 = AXIS2_PLACEMENT_3D('',#256,#257,#258); +#256 = CARTESIAN_POINT('',(146.45,-120.28,-8.5E-02)); +#257 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#258 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#259 = AXIS2_PLACEMENT_3D('',#260,#261,#262); +#260 = CARTESIAN_POINT('',(139.5,-73.,-8.5E-02)); +#261 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#262 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266); +#264 = CARTESIAN_POINT('',(147.16,-128.9,-8.5E-02)); +#265 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#266 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#267 = AXIS2_PLACEMENT_3D('',#268,#269,#270); +#268 = CARTESIAN_POINT('',(150.25,-131.15,-8.5E-02)); +#269 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#270 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274); +#272 = CARTESIAN_POINT('',(148.01,-114.5,-8.5E-02)); +#273 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#274 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#275 = AXIS2_PLACEMENT_3D('',#276,#277,#278); +#276 = CARTESIAN_POINT('',(149.4375,-120.95,-8.5E-02)); +#277 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#278 = DIRECTION('',(1.,0.,0.)); +#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282); +#280 = CARTESIAN_POINT('',(135.5,-117.48,-8.5E-02)); +#281 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#282 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#283 = AXIS2_PLACEMENT_3D('',#284,#285,#286); +#284 = CARTESIAN_POINT('',(137.4,-77.175,-8.5E-02)); +#285 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#286 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#287 = AXIS2_PLACEMENT_3D('',#288,#289,#290); +#288 = CARTESIAN_POINT('',(137.45,-120.5,-8.5E-02)); +#289 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#290 = DIRECTION('',(1.,0.,0.)); +#291 = AXIS2_PLACEMENT_3D('',#292,#293,#294); +#292 = CARTESIAN_POINT('',(133.,-119.,-8.5E-02)); +#293 = DIRECTION('',(-1.224646799147E-16,-1.,-2.334869823773E-16)); +#294 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#295 = AXIS2_PLACEMENT_3D('',#296,#297,#298); +#296 = CARTESIAN_POINT('',(137.6,-122.8,-8.5E-02)); +#297 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#298 = DIRECTION('',(1.,0.,0.)); +#299 = AXIS2_PLACEMENT_3D('',#300,#301,#302); +#300 = CARTESIAN_POINT('',(144.,-120.,-8.5E-02)); +#301 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#302 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#303 = AXIS2_PLACEMENT_3D('',#304,#305,#306); +#304 = CARTESIAN_POINT('',(146.,-123.,-8.5E-02)); +#305 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#306 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310); +#308 = CARTESIAN_POINT('',(122.525,-115.25,-8.5E-02)); +#309 = DIRECTION('',(-1.224646799147E-16,-1.359631073447E-32,-1.)); +#310 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#311 = AXIS2_PLACEMENT_3D('',#312,#313,#314); +#312 = CARTESIAN_POINT('',(125.51,-122.5,-8.5E-02)); +#313 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#314 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#315 = AXIS2_PLACEMENT_3D('',#316,#317,#318); +#316 = CARTESIAN_POINT('',(141.28,-79.4,-8.5E-02)); +#317 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#318 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#319 = AXIS2_PLACEMENT_3D('',#320,#321,#322); +#320 = CARTESIAN_POINT('',(128.41,-120.,-8.5E-02)); +#321 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#322 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#323 = AXIS2_PLACEMENT_3D('',#324,#325,#326); +#324 = CARTESIAN_POINT('',(125.53,-121.,-8.5E-02)); +#325 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#326 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#327 = AXIS2_PLACEMENT_3D('',#328,#329,#330); +#328 = CARTESIAN_POINT('',(122.525,-113.25,-8.5E-02)); +#329 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#330 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#331 = AXIS2_PLACEMENT_3D('',#332,#333,#334); +#332 = CARTESIAN_POINT('',(131.475,-108.8625,-8.5E-02)); +#333 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#334 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338); +#336 = CARTESIAN_POINT('',(138.8,-77.175,-8.5E-02)); +#337 = DIRECTION('',(1.224646799147E-16,-1.359631073447E-32,-1.)); +#338 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#339 = AXIS2_PLACEMENT_3D('',#340,#341,#342); +#340 = CARTESIAN_POINT('',(126.525,-110.,-8.5E-02)); +#341 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#342 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#343 = AXIS2_PLACEMENT_3D('',#344,#345,#346); +#344 = CARTESIAN_POINT('',(137.8375,-71.15,-8.5E-02)); +#345 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#346 = DIRECTION('',(1.,0.,0.)); +#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350); +#348 = CARTESIAN_POINT('',(146.7875,-125.9,-8.5E-02)); +#349 = DIRECTION('',(0.,-1.224646799147E-16,-1.)); +#350 = DIRECTION('',(1.,0.,0.)); +#351 = AXIS2_PLACEMENT_3D('',#352,#353,#354); +#352 = CARTESIAN_POINT('',(125.51,-124.,-8.5E-02)); +#353 = DIRECTION('',(1.499759782662E-32,1.224646799147E-16,-1.)); +#354 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#355 = AXIS2_PLACEMENT_3D('',#356,#357,#358); +#356 = CARTESIAN_POINT('',(0.,0.,0.)); +#357 = DIRECTION('',(0.,0.,1.)); +#358 = DIRECTION('',(1.,0.,-0.)); +#359 = AXIS2_PLACEMENT_3D('',#360,#361,#362); +#360 = CARTESIAN_POINT('',(0.,0.,0.)); +#361 = DIRECTION('',(0.,0.,1.)); +#362 = DIRECTION('',(1.,0.,-0.)); +#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366); +#364 = CARTESIAN_POINT('',(0.,0.,0.)); +#365 = DIRECTION('',(0.,0.,1.)); +#366 = DIRECTION('',(1.,0.,-0.)); +#367 = AXIS2_PLACEMENT_3D('',#368,#369,#370); +#368 = CARTESIAN_POINT('',(0.,0.,0.)); +#369 = DIRECTION('',(0.,0.,1.)); +#370 = DIRECTION('',(1.,0.,-0.)); +#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374); +#372 = CARTESIAN_POINT('',(0.,0.,0.)); +#373 = DIRECTION('',(0.,0.,1.)); +#374 = DIRECTION('',(1.,0.,-0.)); +#375 = AXIS2_PLACEMENT_3D('',#376,#377,#378); +#376 = CARTESIAN_POINT('',(0.,0.,0.)); +#377 = DIRECTION('',(0.,0.,1.)); +#378 = DIRECTION('',(1.,0.,-0.)); +#379 = AXIS2_PLACEMENT_3D('',#380,#381,#382); +#380 = CARTESIAN_POINT('',(0.,0.,0.)); +#381 = DIRECTION('',(0.,0.,1.)); +#382 = DIRECTION('',(1.,0.,-0.)); +#383 = AXIS2_PLACEMENT_3D('',#384,#385,#386); +#384 = CARTESIAN_POINT('',(0.,0.,0.)); +#385 = DIRECTION('',(0.,0.,1.)); +#386 = DIRECTION('',(1.,0.,-0.)); +#387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#391)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#388,#389,#390)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#388 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#389 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#390 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#391 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#388, + 'distance_accuracy_value','confusion accuracy'); +#392 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#393 = SHAPE_DEFINITION_REPRESENTATION(#394,#400); +#394 = PRODUCT_DEFINITION_SHAPE('','',#395); +#395 = PRODUCT_DEFINITION('design','',#396,#399); +#396 = PRODUCT_DEFINITION_FORMATION('','',#397); +#397 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#398)); +#398 = PRODUCT_CONTEXT('',#2,'mechanical'); +#399 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#400 = SHAPE_REPRESENTATION('',(#11,#401),#405); +#401 = AXIS2_PLACEMENT_3D('',#402,#403,#404); +#402 = CARTESIAN_POINT('',(0.,0.,0.)); +#403 = DIRECTION('',(0.,0.,1.)); +#404 = DIRECTION('',(1.,0.,-0.)); +#405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#409)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#406,#407,#408)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#406 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#407 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#408 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#409 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#406, + 'distance_accuracy_value','confusion accuracy'); +#410 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#411,#413); +#411 = ( REPRESENTATION_RELATIONSHIP('','',#400,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#412) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#412 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#413 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',#414 + ); +#414 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','U_XBEE1','',#5,#395,$); +#415 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#397)); +#416 = SHAPE_DEFINITION_REPRESENTATION(#417,#423); +#417 = PRODUCT_DEFINITION_SHAPE('','',#418); +#418 = PRODUCT_DEFINITION('design','',#419,#422); +#419 = PRODUCT_DEFINITION_FORMATION('','',#420); +#420 = PRODUCT('PinSocket_1x10_P2.00mm_Vertical', + 'PinSocket_1x10_P2.00mm_Vertical','',(#421)); +#421 = PRODUCT_CONTEXT('',#2,'mechanical'); +#422 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#423 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#424),#8466); +#424 = MANIFOLD_SOLID_BREP('',#425); +#425 = CLOSED_SHELL('',(#426,#466,#529,#592,#609,#966,#988,#1005,#1682, + #1694,#1706,#1737,#1761,#1785,#1802,#1833,#1857,#1881,#1898,#1929, + #1953,#1977,#1994,#2025,#2049,#2073,#2090,#2121,#2145,#2169,#2186, + #2217,#2241,#2265,#2282,#2313,#2337,#2361,#2378,#2409,#2433,#2457, + #2474,#2505,#2529,#2553,#2570,#2601,#2625,#2649,#2666,#2683,#2730, + #2747,#2794,#2811,#2858,#2875,#2922,#2939,#2986,#3003,#3050,#3067, + #3114,#3131,#3178,#3195,#3242,#3259,#3306,#3323,#3370,#3387,#3434, + #3451,#3498,#3515,#3562,#3579,#3626,#3643,#3690,#3707,#3754,#3771, + #3818,#3835,#3882,#3899,#3946,#3977,#4033,#4057,#4106,#4137,#4193, + #4217,#4266,#4297,#4353,#4377,#4426,#4457,#4513,#4537,#4586,#4617, + #4673,#4697,#4746,#4777,#4833,#4857,#4906,#4937,#4993,#5017,#5066, + #5097,#5153,#5177,#5226,#5257,#5313,#5337,#5386,#5417,#5473,#5497, + #5546,#5563,#5580,#5597,#5614,#5626,#5643,#5660,#5677,#5694,#5706, + #5723,#5740,#5757,#5774,#5786,#5803,#5820,#5837,#5854,#5866,#5883, + #5900,#5917,#5934,#5946,#5963,#5980,#5997,#6014,#6026,#6043,#6060, + #6077,#6094,#6106,#6123,#6140,#6157,#6174,#6186,#6203,#6220,#6237, + #6254,#6266,#6283,#6300,#6317,#6334,#6346,#6363,#6380,#6429,#6453, + #6495,#6512,#6529,#6546,#6595,#6619,#6661,#6678,#6695,#6712,#6761, + #6785,#6827,#6844,#6861,#6878,#6927,#6951,#6993,#7010,#7027,#7044, + #7093,#7117,#7159,#7176,#7193,#7210,#7259,#7283,#7325,#7342,#7359, + #7376,#7425,#7449,#7491,#7508,#7525,#7542,#7591,#7615,#7657,#7674, + #7691,#7708,#7757,#7781,#7823,#7840,#7857,#7874,#7923,#7947,#7989, + #8006,#8023,#8040,#8052,#8069,#8086,#8098,#8115,#8132,#8144,#8161, + #8178,#8190,#8207,#8224,#8236,#8253,#8270,#8282,#8299,#8316,#8328, + #8345,#8362,#8374,#8391,#8408,#8420,#8437,#8454)); +#426 = ADVANCED_FACE('',(#427),#461,.F.); +#427 = FACE_BOUND('',#428,.F.); +#428 = EDGE_LOOP('',(#429,#439,#447,#455)); +#429 = ORIENTED_EDGE('',*,*,#430,.T.); +#430 = EDGE_CURVE('',#431,#433,#435,.T.); +#431 = VERTEX_POINT('',#432); +#432 = CARTESIAN_POINT('',(1.,-19.,0.)); +#433 = VERTEX_POINT('',#434); +#434 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#435 = LINE('',#436,#437); +#436 = CARTESIAN_POINT('',(1.,-19.,0.)); +#437 = VECTOR('',#438,1.); +#438 = DIRECTION('',(0.,0.,1.)); +#439 = ORIENTED_EDGE('',*,*,#440,.T.); +#440 = EDGE_CURVE('',#433,#441,#443,.T.); +#441 = VERTEX_POINT('',#442); +#442 = CARTESIAN_POINT('',(1.,1.,5.6)); +#443 = LINE('',#444,#445); +#444 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#445 = VECTOR('',#446,1.); +#446 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#447 = ORIENTED_EDGE('',*,*,#448,.F.); +#448 = EDGE_CURVE('',#449,#441,#451,.T.); +#449 = VERTEX_POINT('',#450); +#450 = CARTESIAN_POINT('',(1.,1.,0.)); +#451 = LINE('',#452,#453); +#452 = CARTESIAN_POINT('',(1.,1.,0.)); +#453 = VECTOR('',#454,1.); +#454 = DIRECTION('',(0.,0.,1.)); +#455 = ORIENTED_EDGE('',*,*,#456,.F.); +#456 = EDGE_CURVE('',#431,#449,#457,.T.); +#457 = LINE('',#458,#459); +#458 = CARTESIAN_POINT('',(1.,-19.,0.)); +#459 = VECTOR('',#460,1.); +#460 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#461 = PLANE('',#462); +#462 = AXIS2_PLACEMENT_3D('',#463,#464,#465); +#463 = CARTESIAN_POINT('',(1.,-19.,0.)); +#464 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#465 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#466 = ADVANCED_FACE('',(#467),#524,.F.); +#467 = FACE_BOUND('',#468,.F.); +#468 = EDGE_LOOP('',(#469,#479,#487,#493,#494,#502,#510,#518)); +#469 = ORIENTED_EDGE('',*,*,#470,.F.); +#470 = EDGE_CURVE('',#471,#473,#475,.T.); +#471 = VERTEX_POINT('',#472); +#472 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#473 = VERTEX_POINT('',#474); +#474 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#475 = LINE('',#476,#477); +#476 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#477 = VECTOR('',#478,1.); +#478 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#479 = ORIENTED_EDGE('',*,*,#480,.T.); +#480 = EDGE_CURVE('',#471,#481,#483,.T.); +#481 = VERTEX_POINT('',#482); +#482 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#483 = LINE('',#484,#485); +#484 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#485 = VECTOR('',#486,1.); +#486 = DIRECTION('',(0.,0.,1.)); +#487 = ORIENTED_EDGE('',*,*,#488,.T.); +#488 = EDGE_CURVE('',#481,#433,#489,.T.); +#489 = LINE('',#490,#491); +#490 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#491 = VECTOR('',#492,1.); +#492 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#493 = ORIENTED_EDGE('',*,*,#430,.F.); +#494 = ORIENTED_EDGE('',*,*,#495,.F.); +#495 = EDGE_CURVE('',#496,#431,#498,.T.); +#496 = VERTEX_POINT('',#497); +#497 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#498 = LINE('',#499,#500); +#499 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#500 = VECTOR('',#501,1.); +#501 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#502 = ORIENTED_EDGE('',*,*,#503,.T.); +#503 = EDGE_CURVE('',#496,#504,#506,.T.); +#504 = VERTEX_POINT('',#505); +#505 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#506 = LINE('',#507,#508); +#507 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#508 = VECTOR('',#509,1.); +#509 = DIRECTION('',(0.,0.,1.)); +#510 = ORIENTED_EDGE('',*,*,#511,.F.); +#511 = EDGE_CURVE('',#512,#504,#514,.T.); +#512 = VERTEX_POINT('',#513); +#513 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#514 = LINE('',#515,#516); +#515 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.2)); +#516 = VECTOR('',#517,1.); +#517 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#518 = ORIENTED_EDGE('',*,*,#519,.F.); +#519 = EDGE_CURVE('',#473,#512,#520,.T.); +#520 = LINE('',#521,#522); +#521 = CARTESIAN_POINT('',(-0.666666666667,-19.,0.)); +#522 = VECTOR('',#523,1.); +#523 = DIRECTION('',(0.,0.,1.)); +#524 = PLANE('',#525); +#525 = AXIS2_PLACEMENT_3D('',#526,#527,#528); +#526 = CARTESIAN_POINT('',(-1.,-19.,0.)); +#527 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#528 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#529 = ADVANCED_FACE('',(#530),#587,.F.); +#530 = FACE_BOUND('',#531,.F.); +#531 = EDGE_LOOP('',(#532,#540,#541,#549,#557,#565,#573,#581)); +#532 = ORIENTED_EDGE('',*,*,#533,.F.); +#533 = EDGE_CURVE('',#449,#534,#536,.T.); +#534 = VERTEX_POINT('',#535); +#535 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#536 = LINE('',#537,#538); +#537 = CARTESIAN_POINT('',(1.,1.,0.)); +#538 = VECTOR('',#539,1.); +#539 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#540 = ORIENTED_EDGE('',*,*,#448,.T.); +#541 = ORIENTED_EDGE('',*,*,#542,.T.); +#542 = EDGE_CURVE('',#441,#543,#545,.T.); +#543 = VERTEX_POINT('',#544); +#544 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#545 = LINE('',#546,#547); +#546 = CARTESIAN_POINT('',(1.,1.,5.6)); +#547 = VECTOR('',#548,1.); +#548 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#549 = ORIENTED_EDGE('',*,*,#550,.F.); +#550 = EDGE_CURVE('',#551,#543,#553,.T.); +#551 = VERTEX_POINT('',#552); +#552 = CARTESIAN_POINT('',(-1.,1.,0.)); +#553 = LINE('',#554,#555); +#554 = CARTESIAN_POINT('',(-1.,1.,0.)); +#555 = VECTOR('',#556,1.); +#556 = DIRECTION('',(0.,0.,1.)); +#557 = ORIENTED_EDGE('',*,*,#558,.F.); +#558 = EDGE_CURVE('',#559,#551,#561,.T.); +#559 = VERTEX_POINT('',#560); +#560 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#561 = LINE('',#562,#563); +#562 = CARTESIAN_POINT('',(1.,1.,0.)); +#563 = VECTOR('',#564,1.); +#564 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#565 = ORIENTED_EDGE('',*,*,#566,.T.); +#566 = EDGE_CURVE('',#559,#567,#569,.T.); +#567 = VERTEX_POINT('',#568); +#568 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#569 = LINE('',#570,#571); +#570 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#571 = VECTOR('',#572,1.); +#572 = DIRECTION('',(0.,0.,1.)); +#573 = ORIENTED_EDGE('',*,*,#574,.F.); +#574 = EDGE_CURVE('',#575,#567,#577,.T.); +#575 = VERTEX_POINT('',#576); +#576 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#577 = LINE('',#578,#579); +#578 = CARTESIAN_POINT('',(0.666666666667,1.,0.2)); +#579 = VECTOR('',#580,1.); +#580 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#581 = ORIENTED_EDGE('',*,*,#582,.F.); +#582 = EDGE_CURVE('',#534,#575,#583,.T.); +#583 = LINE('',#584,#585); +#584 = CARTESIAN_POINT('',(0.666666666667,1.,0.)); +#585 = VECTOR('',#586,1.); +#586 = DIRECTION('',(0.,0.,1.)); +#587 = PLANE('',#588); +#588 = AXIS2_PLACEMENT_3D('',#589,#590,#591); +#589 = CARTESIAN_POINT('',(1.,1.,0.)); +#590 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#591 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#592 = ADVANCED_FACE('',(#593),#604,.F.); +#593 = FACE_BOUND('',#594,.F.); +#594 = EDGE_LOOP('',(#595,#596,#597,#598)); +#595 = ORIENTED_EDGE('',*,*,#495,.T.); +#596 = ORIENTED_EDGE('',*,*,#456,.T.); +#597 = ORIENTED_EDGE('',*,*,#533,.T.); +#598 = ORIENTED_EDGE('',*,*,#599,.F.); +#599 = EDGE_CURVE('',#496,#534,#600,.T.); +#600 = LINE('',#601,#602); +#601 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#602 = VECTOR('',#603,1.); +#603 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#604 = PLANE('',#605); +#605 = AXIS2_PLACEMENT_3D('',#606,#607,#608); +#606 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#607 = DIRECTION('',(0.,0.,1.)); +#608 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#609 = ADVANCED_FACE('',(#610,#621,#655,#689,#723,#757,#791,#825,#859, + #893,#927),#961,.T.); +#610 = FACE_BOUND('',#611,.T.); +#611 = EDGE_LOOP('',(#612,#613,#614,#620)); +#612 = ORIENTED_EDGE('',*,*,#440,.T.); +#613 = ORIENTED_EDGE('',*,*,#542,.T.); +#614 = ORIENTED_EDGE('',*,*,#615,.T.); +#615 = EDGE_CURVE('',#543,#481,#616,.T.); +#616 = LINE('',#617,#618); +#617 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#618 = VECTOR('',#619,1.); +#619 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#620 = ORIENTED_EDGE('',*,*,#488,.T.); +#621 = FACE_BOUND('',#622,.T.); +#622 = EDGE_LOOP('',(#623,#633,#641,#649)); +#623 = ORIENTED_EDGE('',*,*,#624,.F.); +#624 = EDGE_CURVE('',#625,#627,#629,.T.); +#625 = VERTEX_POINT('',#626); +#626 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#627 = VERTEX_POINT('',#628); +#628 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#629 = LINE('',#630,#631); +#630 = CARTESIAN_POINT('',(0.6,-18.6,5.6)); +#631 = VECTOR('',#632,1.); +#632 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#633 = ORIENTED_EDGE('',*,*,#634,.F.); +#634 = EDGE_CURVE('',#635,#625,#637,.T.); +#635 = VERTEX_POINT('',#636); +#636 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#637 = LINE('',#638,#639); +#638 = CARTESIAN_POINT('',(-0.6,-18.6,5.6)); +#639 = VECTOR('',#640,1.); +#640 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#641 = ORIENTED_EDGE('',*,*,#642,.F.); +#642 = EDGE_CURVE('',#643,#635,#645,.T.); +#643 = VERTEX_POINT('',#644); +#644 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#645 = LINE('',#646,#647); +#646 = CARTESIAN_POINT('',(-0.6,-17.4,5.6)); +#647 = VECTOR('',#648,1.); +#648 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#649 = ORIENTED_EDGE('',*,*,#650,.F.); +#650 = EDGE_CURVE('',#627,#643,#651,.T.); +#651 = LINE('',#652,#653); +#652 = CARTESIAN_POINT('',(0.6,-17.4,5.6)); +#653 = VECTOR('',#654,1.); +#654 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#655 = FACE_BOUND('',#656,.T.); +#656 = EDGE_LOOP('',(#657,#667,#675,#683)); +#657 = ORIENTED_EDGE('',*,*,#658,.F.); +#658 = EDGE_CURVE('',#659,#661,#663,.T.); +#659 = VERTEX_POINT('',#660); +#660 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#661 = VERTEX_POINT('',#662); +#662 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#663 = LINE('',#664,#665); +#664 = CARTESIAN_POINT('',(0.6,-16.6,5.6)); +#665 = VECTOR('',#666,1.); +#666 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#667 = ORIENTED_EDGE('',*,*,#668,.F.); +#668 = EDGE_CURVE('',#669,#659,#671,.T.); +#669 = VERTEX_POINT('',#670); +#670 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#671 = LINE('',#672,#673); +#672 = CARTESIAN_POINT('',(-0.6,-16.6,5.6)); +#673 = VECTOR('',#674,1.); +#674 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#675 = ORIENTED_EDGE('',*,*,#676,.F.); +#676 = EDGE_CURVE('',#677,#669,#679,.T.); +#677 = VERTEX_POINT('',#678); +#678 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#679 = LINE('',#680,#681); +#680 = CARTESIAN_POINT('',(-0.6,-15.4,5.6)); +#681 = VECTOR('',#682,1.); +#682 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#683 = ORIENTED_EDGE('',*,*,#684,.F.); +#684 = EDGE_CURVE('',#661,#677,#685,.T.); +#685 = LINE('',#686,#687); +#686 = CARTESIAN_POINT('',(0.6,-15.4,5.6)); +#687 = VECTOR('',#688,1.); +#688 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#689 = FACE_BOUND('',#690,.T.); +#690 = EDGE_LOOP('',(#691,#701,#709,#717)); +#691 = ORIENTED_EDGE('',*,*,#692,.F.); +#692 = EDGE_CURVE('',#693,#695,#697,.T.); +#693 = VERTEX_POINT('',#694); +#694 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#695 = VERTEX_POINT('',#696); +#696 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#697 = LINE('',#698,#699); +#698 = CARTESIAN_POINT('',(0.6,-14.6,5.6)); +#699 = VECTOR('',#700,1.); +#700 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#701 = ORIENTED_EDGE('',*,*,#702,.F.); +#702 = EDGE_CURVE('',#703,#693,#705,.T.); +#703 = VERTEX_POINT('',#704); +#704 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#705 = LINE('',#706,#707); +#706 = CARTESIAN_POINT('',(-0.6,-14.6,5.6)); +#707 = VECTOR('',#708,1.); +#708 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#709 = ORIENTED_EDGE('',*,*,#710,.F.); +#710 = EDGE_CURVE('',#711,#703,#713,.T.); +#711 = VERTEX_POINT('',#712); +#712 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#713 = LINE('',#714,#715); +#714 = CARTESIAN_POINT('',(-0.6,-13.4,5.6)); +#715 = VECTOR('',#716,1.); +#716 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#717 = ORIENTED_EDGE('',*,*,#718,.F.); +#718 = EDGE_CURVE('',#695,#711,#719,.T.); +#719 = LINE('',#720,#721); +#720 = CARTESIAN_POINT('',(0.6,-13.4,5.6)); +#721 = VECTOR('',#722,1.); +#722 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#723 = FACE_BOUND('',#724,.T.); +#724 = EDGE_LOOP('',(#725,#735,#743,#751)); +#725 = ORIENTED_EDGE('',*,*,#726,.F.); +#726 = EDGE_CURVE('',#727,#729,#731,.T.); +#727 = VERTEX_POINT('',#728); +#728 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#729 = VERTEX_POINT('',#730); +#730 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#731 = LINE('',#732,#733); +#732 = CARTESIAN_POINT('',(0.6,-12.6,5.6)); +#733 = VECTOR('',#734,1.); +#734 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#735 = ORIENTED_EDGE('',*,*,#736,.F.); +#736 = EDGE_CURVE('',#737,#727,#739,.T.); +#737 = VERTEX_POINT('',#738); +#738 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#739 = LINE('',#740,#741); +#740 = CARTESIAN_POINT('',(-0.6,-12.6,5.6)); +#741 = VECTOR('',#742,1.); +#742 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#743 = ORIENTED_EDGE('',*,*,#744,.F.); +#744 = EDGE_CURVE('',#745,#737,#747,.T.); +#745 = VERTEX_POINT('',#746); +#746 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#747 = LINE('',#748,#749); +#748 = CARTESIAN_POINT('',(-0.6,-11.4,5.6)); +#749 = VECTOR('',#750,1.); +#750 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#751 = ORIENTED_EDGE('',*,*,#752,.F.); +#752 = EDGE_CURVE('',#729,#745,#753,.T.); +#753 = LINE('',#754,#755); +#754 = CARTESIAN_POINT('',(0.6,-11.4,5.6)); +#755 = VECTOR('',#756,1.); +#756 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#757 = FACE_BOUND('',#758,.T.); +#758 = EDGE_LOOP('',(#759,#769,#777,#785)); +#759 = ORIENTED_EDGE('',*,*,#760,.F.); +#760 = EDGE_CURVE('',#761,#763,#765,.T.); +#761 = VERTEX_POINT('',#762); +#762 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#763 = VERTEX_POINT('',#764); +#764 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#765 = LINE('',#766,#767); +#766 = CARTESIAN_POINT('',(0.6,-10.6,5.6)); +#767 = VECTOR('',#768,1.); +#768 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#769 = ORIENTED_EDGE('',*,*,#770,.F.); +#770 = EDGE_CURVE('',#771,#761,#773,.T.); +#771 = VERTEX_POINT('',#772); +#772 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#773 = LINE('',#774,#775); +#774 = CARTESIAN_POINT('',(-0.6,-10.6,5.6)); +#775 = VECTOR('',#776,1.); +#776 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#777 = ORIENTED_EDGE('',*,*,#778,.F.); +#778 = EDGE_CURVE('',#779,#771,#781,.T.); +#779 = VERTEX_POINT('',#780); +#780 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#781 = LINE('',#782,#783); +#782 = CARTESIAN_POINT('',(-0.6,-9.4,5.6)); +#783 = VECTOR('',#784,1.); +#784 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#785 = ORIENTED_EDGE('',*,*,#786,.F.); +#786 = EDGE_CURVE('',#763,#779,#787,.T.); +#787 = LINE('',#788,#789); +#788 = CARTESIAN_POINT('',(0.6,-9.4,5.6)); +#789 = VECTOR('',#790,1.); +#790 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#791 = FACE_BOUND('',#792,.T.); +#792 = EDGE_LOOP('',(#793,#803,#811,#819)); +#793 = ORIENTED_EDGE('',*,*,#794,.F.); +#794 = EDGE_CURVE('',#795,#797,#799,.T.); +#795 = VERTEX_POINT('',#796); +#796 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#797 = VERTEX_POINT('',#798); +#798 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#799 = LINE('',#800,#801); +#800 = CARTESIAN_POINT('',(0.6,-8.6,5.6)); +#801 = VECTOR('',#802,1.); +#802 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#803 = ORIENTED_EDGE('',*,*,#804,.F.); +#804 = EDGE_CURVE('',#805,#795,#807,.T.); +#805 = VERTEX_POINT('',#806); +#806 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#807 = LINE('',#808,#809); +#808 = CARTESIAN_POINT('',(-0.6,-8.6,5.6)); +#809 = VECTOR('',#810,1.); +#810 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#811 = ORIENTED_EDGE('',*,*,#812,.F.); +#812 = EDGE_CURVE('',#813,#805,#815,.T.); +#813 = VERTEX_POINT('',#814); +#814 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#815 = LINE('',#816,#817); +#816 = CARTESIAN_POINT('',(-0.6,-7.4,5.6)); +#817 = VECTOR('',#818,1.); +#818 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#819 = ORIENTED_EDGE('',*,*,#820,.F.); +#820 = EDGE_CURVE('',#797,#813,#821,.T.); +#821 = LINE('',#822,#823); +#822 = CARTESIAN_POINT('',(0.6,-7.4,5.6)); +#823 = VECTOR('',#824,1.); +#824 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#825 = FACE_BOUND('',#826,.T.); +#826 = EDGE_LOOP('',(#827,#837,#845,#853)); +#827 = ORIENTED_EDGE('',*,*,#828,.F.); +#828 = EDGE_CURVE('',#829,#831,#833,.T.); +#829 = VERTEX_POINT('',#830); +#830 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#831 = VERTEX_POINT('',#832); +#832 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#833 = LINE('',#834,#835); +#834 = CARTESIAN_POINT('',(0.6,-6.6,5.6)); +#835 = VECTOR('',#836,1.); +#836 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#837 = ORIENTED_EDGE('',*,*,#838,.F.); +#838 = EDGE_CURVE('',#839,#829,#841,.T.); +#839 = VERTEX_POINT('',#840); +#840 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#841 = LINE('',#842,#843); +#842 = CARTESIAN_POINT('',(-0.6,-6.6,5.6)); +#843 = VECTOR('',#844,1.); +#844 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#845 = ORIENTED_EDGE('',*,*,#846,.F.); +#846 = EDGE_CURVE('',#847,#839,#849,.T.); +#847 = VERTEX_POINT('',#848); +#848 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#849 = LINE('',#850,#851); +#850 = CARTESIAN_POINT('',(-0.6,-5.4,5.6)); +#851 = VECTOR('',#852,1.); +#852 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#853 = ORIENTED_EDGE('',*,*,#854,.F.); +#854 = EDGE_CURVE('',#831,#847,#855,.T.); +#855 = LINE('',#856,#857); +#856 = CARTESIAN_POINT('',(0.6,-5.4,5.6)); +#857 = VECTOR('',#858,1.); +#858 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#859 = FACE_BOUND('',#860,.T.); +#860 = EDGE_LOOP('',(#861,#871,#879,#887)); +#861 = ORIENTED_EDGE('',*,*,#862,.F.); +#862 = EDGE_CURVE('',#863,#865,#867,.T.); +#863 = VERTEX_POINT('',#864); +#864 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#865 = VERTEX_POINT('',#866); +#866 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#867 = LINE('',#868,#869); +#868 = CARTESIAN_POINT('',(0.6,-4.6,5.6)); +#869 = VECTOR('',#870,1.); +#870 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#871 = ORIENTED_EDGE('',*,*,#872,.F.); +#872 = EDGE_CURVE('',#873,#863,#875,.T.); +#873 = VERTEX_POINT('',#874); +#874 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#875 = LINE('',#876,#877); +#876 = CARTESIAN_POINT('',(-0.6,-4.6,5.6)); +#877 = VECTOR('',#878,1.); +#878 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#879 = ORIENTED_EDGE('',*,*,#880,.F.); +#880 = EDGE_CURVE('',#881,#873,#883,.T.); +#881 = VERTEX_POINT('',#882); +#882 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#883 = LINE('',#884,#885); +#884 = CARTESIAN_POINT('',(-0.6,-3.4,5.6)); +#885 = VECTOR('',#886,1.); +#886 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#887 = ORIENTED_EDGE('',*,*,#888,.F.); +#888 = EDGE_CURVE('',#865,#881,#889,.T.); +#889 = LINE('',#890,#891); +#890 = CARTESIAN_POINT('',(0.6,-3.4,5.6)); +#891 = VECTOR('',#892,1.); +#892 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#893 = FACE_BOUND('',#894,.T.); +#894 = EDGE_LOOP('',(#895,#905,#913,#921)); +#895 = ORIENTED_EDGE('',*,*,#896,.F.); +#896 = EDGE_CURVE('',#897,#899,#901,.T.); +#897 = VERTEX_POINT('',#898); +#898 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#899 = VERTEX_POINT('',#900); +#900 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#901 = LINE('',#902,#903); +#902 = CARTESIAN_POINT('',(0.6,-2.6,5.6)); +#903 = VECTOR('',#904,1.); +#904 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#905 = ORIENTED_EDGE('',*,*,#906,.F.); +#906 = EDGE_CURVE('',#907,#897,#909,.T.); +#907 = VERTEX_POINT('',#908); +#908 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#909 = LINE('',#910,#911); +#910 = CARTESIAN_POINT('',(-0.6,-2.6,5.6)); +#911 = VECTOR('',#912,1.); +#912 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#913 = ORIENTED_EDGE('',*,*,#914,.F.); +#914 = EDGE_CURVE('',#915,#907,#917,.T.); +#915 = VERTEX_POINT('',#916); +#916 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#917 = LINE('',#918,#919); +#918 = CARTESIAN_POINT('',(-0.6,-1.4,5.6)); +#919 = VECTOR('',#920,1.); +#920 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#921 = ORIENTED_EDGE('',*,*,#922,.F.); +#922 = EDGE_CURVE('',#899,#915,#923,.T.); +#923 = LINE('',#924,#925); +#924 = CARTESIAN_POINT('',(0.6,-1.4,5.6)); +#925 = VECTOR('',#926,1.); +#926 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#927 = FACE_BOUND('',#928,.T.); +#928 = EDGE_LOOP('',(#929,#939,#947,#955)); +#929 = ORIENTED_EDGE('',*,*,#930,.F.); +#930 = EDGE_CURVE('',#931,#933,#935,.T.); +#931 = VERTEX_POINT('',#932); +#932 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#933 = VERTEX_POINT('',#934); +#934 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#935 = LINE('',#936,#937); +#936 = CARTESIAN_POINT('',(0.6,-0.6,5.6)); +#937 = VECTOR('',#938,1.); +#938 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#939 = ORIENTED_EDGE('',*,*,#940,.F.); +#940 = EDGE_CURVE('',#941,#931,#943,.T.); +#941 = VERTEX_POINT('',#942); +#942 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#943 = LINE('',#944,#945); +#944 = CARTESIAN_POINT('',(-0.6,-0.6,5.6)); +#945 = VECTOR('',#946,1.); +#946 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#947 = ORIENTED_EDGE('',*,*,#948,.F.); +#948 = EDGE_CURVE('',#949,#941,#951,.T.); +#949 = VERTEX_POINT('',#950); +#950 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#951 = LINE('',#952,#953); +#952 = CARTESIAN_POINT('',(-0.6,0.6,5.6)); +#953 = VECTOR('',#954,1.); +#954 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#955 = ORIENTED_EDGE('',*,*,#956,.F.); +#956 = EDGE_CURVE('',#933,#949,#957,.T.); +#957 = LINE('',#958,#959); +#958 = CARTESIAN_POINT('',(0.6,0.6,5.6)); +#959 = VECTOR('',#960,1.); +#960 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#961 = PLANE('',#962); +#962 = AXIS2_PLACEMENT_3D('',#963,#964,#965); +#963 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,5.6)); +#964 = DIRECTION('',(0.,0.,1.)); +#965 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#966 = ADVANCED_FACE('',(#967),#983,.F.); +#967 = FACE_BOUND('',#968,.F.); +#968 = EDGE_LOOP('',(#969,#970,#976,#977)); +#969 = ORIENTED_EDGE('',*,*,#470,.T.); +#970 = ORIENTED_EDGE('',*,*,#971,.F.); +#971 = EDGE_CURVE('',#559,#473,#972,.T.); +#972 = LINE('',#973,#974); +#973 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#974 = VECTOR('',#975,1.); +#975 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#976 = ORIENTED_EDGE('',*,*,#558,.T.); +#977 = ORIENTED_EDGE('',*,*,#978,.T.); +#978 = EDGE_CURVE('',#551,#471,#979,.T.); +#979 = LINE('',#980,#981); +#980 = CARTESIAN_POINT('',(-1.,1.,0.)); +#981 = VECTOR('',#982,1.); +#982 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#983 = PLANE('',#984); +#984 = AXIS2_PLACEMENT_3D('',#985,#986,#987); +#985 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.)); +#986 = DIRECTION('',(0.,0.,1.)); +#987 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#988 = ADVANCED_FACE('',(#989),#1000,.T.); +#989 = FACE_BOUND('',#990,.T.); +#990 = EDGE_LOOP('',(#991,#992,#998,#999)); +#991 = ORIENTED_EDGE('',*,*,#566,.T.); +#992 = ORIENTED_EDGE('',*,*,#993,.T.); +#993 = EDGE_CURVE('',#567,#512,#994,.T.); +#994 = LINE('',#995,#996); +#995 = CARTESIAN_POINT('',(-0.666666666667,1.,0.2)); +#996 = VECTOR('',#997,1.); +#997 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#998 = ORIENTED_EDGE('',*,*,#519,.F.); +#999 = ORIENTED_EDGE('',*,*,#971,.F.); +#1000 = PLANE('',#1001); +#1001 = AXIS2_PLACEMENT_3D('',#1002,#1003,#1004); +#1002 = CARTESIAN_POINT('',(-0.666666666667,1.,0.)); +#1003 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1004 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1005 = ADVANCED_FACE('',(#1006,#1017,#1083,#1149,#1215,#1281,#1347, + #1413,#1479,#1545,#1611),#1677,.F.); +#1006 = FACE_BOUND('',#1007,.F.); +#1007 = EDGE_LOOP('',(#1008,#1014,#1015,#1016)); +#1008 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1009 = EDGE_CURVE('',#504,#575,#1010,.T.); +#1010 = LINE('',#1011,#1012); +#1011 = CARTESIAN_POINT('',(0.666666666667,-19.,0.2)); +#1012 = VECTOR('',#1013,1.); +#1013 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1014 = ORIENTED_EDGE('',*,*,#574,.T.); +#1015 = ORIENTED_EDGE('',*,*,#993,.T.); +#1016 = ORIENTED_EDGE('',*,*,#511,.T.); +#1017 = FACE_BOUND('',#1018,.F.); +#1018 = EDGE_LOOP('',(#1019,#1029,#1037,#1045,#1053,#1061,#1069,#1077)); +#1019 = ORIENTED_EDGE('',*,*,#1020,.F.); +#1020 = EDGE_CURVE('',#1021,#1023,#1025,.T.); +#1021 = VERTEX_POINT('',#1022); +#1022 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#1023 = VERTEX_POINT('',#1024); +#1024 = CARTESIAN_POINT('',(0.1,-18.45,0.2)); +#1025 = LINE('',#1026,#1027); +#1026 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#1027 = VECTOR('',#1028,1.); +#1028 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1029 = ORIENTED_EDGE('',*,*,#1030,.T.); +#1030 = EDGE_CURVE('',#1021,#1031,#1033,.T.); +#1031 = VERTEX_POINT('',#1032); +#1032 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#1033 = LINE('',#1034,#1035); +#1034 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#1035 = VECTOR('',#1036,1.); +#1036 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1037 = ORIENTED_EDGE('',*,*,#1038,.F.); +#1038 = EDGE_CURVE('',#1039,#1031,#1041,.T.); +#1039 = VERTEX_POINT('',#1040); +#1040 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#1041 = LINE('',#1042,#1043); +#1042 = CARTESIAN_POINT('',(-0.1,-13.5,0.2)); +#1043 = VECTOR('',#1044,1.); +#1044 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1045 = ORIENTED_EDGE('',*,*,#1046,.T.); +#1046 = EDGE_CURVE('',#1039,#1047,#1049,.T.); +#1047 = VERTEX_POINT('',#1048); +#1048 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#1049 = LINE('',#1050,#1051); +#1050 = CARTESIAN_POINT('',(-0.1,-18.45,0.2)); +#1051 = VECTOR('',#1052,1.); +#1052 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1053 = ORIENTED_EDGE('',*,*,#1054,.T.); +#1054 = EDGE_CURVE('',#1047,#1055,#1057,.T.); +#1055 = VERTEX_POINT('',#1056); +#1056 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#1057 = LINE('',#1058,#1059); +#1058 = CARTESIAN_POINT('',(-0.1,-17.55,0.2)); +#1059 = VECTOR('',#1060,1.); +#1060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1061 = ORIENTED_EDGE('',*,*,#1062,.T.); +#1062 = EDGE_CURVE('',#1055,#1063,#1065,.T.); +#1063 = VERTEX_POINT('',#1064); +#1064 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#1065 = LINE('',#1066,#1067); +#1066 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#1067 = VECTOR('',#1068,1.); +#1068 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1069 = ORIENTED_EDGE('',*,*,#1070,.T.); +#1070 = EDGE_CURVE('',#1063,#1071,#1073,.T.); +#1071 = VERTEX_POINT('',#1072); +#1072 = CARTESIAN_POINT('',(0.1,-18.3,0.2)); +#1073 = LINE('',#1074,#1075); +#1074 = CARTESIAN_POINT('',(0.1,-13.5,0.2)); +#1075 = VECTOR('',#1076,1.); +#1076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1077 = ORIENTED_EDGE('',*,*,#1078,.T.); +#1078 = EDGE_CURVE('',#1071,#1023,#1079,.T.); +#1079 = LINE('',#1080,#1081); +#1080 = CARTESIAN_POINT('',(0.1,-17.55,0.2)); +#1081 = VECTOR('',#1082,1.); +#1082 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1083 = FACE_BOUND('',#1084,.F.); +#1084 = EDGE_LOOP('',(#1085,#1095,#1103,#1111,#1119,#1127,#1135,#1143)); +#1085 = ORIENTED_EDGE('',*,*,#1086,.F.); +#1086 = EDGE_CURVE('',#1087,#1089,#1091,.T.); +#1087 = VERTEX_POINT('',#1088); +#1088 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#1089 = VERTEX_POINT('',#1090); +#1090 = CARTESIAN_POINT('',(0.1,-16.45,0.2)); +#1091 = LINE('',#1092,#1093); +#1092 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#1093 = VECTOR('',#1094,1.); +#1094 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1095 = ORIENTED_EDGE('',*,*,#1096,.T.); +#1096 = EDGE_CURVE('',#1087,#1097,#1099,.T.); +#1097 = VERTEX_POINT('',#1098); +#1098 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#1099 = LINE('',#1100,#1101); +#1100 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#1101 = VECTOR('',#1102,1.); +#1102 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1103 = ORIENTED_EDGE('',*,*,#1104,.F.); +#1104 = EDGE_CURVE('',#1105,#1097,#1107,.T.); +#1105 = VERTEX_POINT('',#1106); +#1106 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#1107 = LINE('',#1108,#1109); +#1108 = CARTESIAN_POINT('',(-0.1,-12.5,0.2)); +#1109 = VECTOR('',#1110,1.); +#1110 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1111 = ORIENTED_EDGE('',*,*,#1112,.T.); +#1112 = EDGE_CURVE('',#1105,#1113,#1115,.T.); +#1113 = VERTEX_POINT('',#1114); +#1114 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#1115 = LINE('',#1116,#1117); +#1116 = CARTESIAN_POINT('',(-0.1,-16.45,0.2)); +#1117 = VECTOR('',#1118,1.); +#1118 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1119 = ORIENTED_EDGE('',*,*,#1120,.T.); +#1120 = EDGE_CURVE('',#1113,#1121,#1123,.T.); +#1121 = VERTEX_POINT('',#1122); +#1122 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#1123 = LINE('',#1124,#1125); +#1124 = CARTESIAN_POINT('',(-0.1,-15.55,0.2)); +#1125 = VECTOR('',#1126,1.); +#1126 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1127 = ORIENTED_EDGE('',*,*,#1128,.T.); +#1128 = EDGE_CURVE('',#1121,#1129,#1131,.T.); +#1129 = VERTEX_POINT('',#1130); +#1130 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#1131 = LINE('',#1132,#1133); +#1132 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#1133 = VECTOR('',#1134,1.); +#1134 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1135 = ORIENTED_EDGE('',*,*,#1136,.T.); +#1136 = EDGE_CURVE('',#1129,#1137,#1139,.T.); +#1137 = VERTEX_POINT('',#1138); +#1138 = CARTESIAN_POINT('',(0.1,-16.3,0.2)); +#1139 = LINE('',#1140,#1141); +#1140 = CARTESIAN_POINT('',(0.1,-12.5,0.2)); +#1141 = VECTOR('',#1142,1.); +#1142 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1143 = ORIENTED_EDGE('',*,*,#1144,.T.); +#1144 = EDGE_CURVE('',#1137,#1089,#1145,.T.); +#1145 = LINE('',#1146,#1147); +#1146 = CARTESIAN_POINT('',(0.1,-15.55,0.2)); +#1147 = VECTOR('',#1148,1.); +#1148 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1149 = FACE_BOUND('',#1150,.F.); +#1150 = EDGE_LOOP('',(#1151,#1161,#1169,#1177,#1185,#1193,#1201,#1209)); +#1151 = ORIENTED_EDGE('',*,*,#1152,.F.); +#1152 = EDGE_CURVE('',#1153,#1155,#1157,.T.); +#1153 = VERTEX_POINT('',#1154); +#1154 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#1155 = VERTEX_POINT('',#1156); +#1156 = CARTESIAN_POINT('',(0.1,-14.45,0.2)); +#1157 = LINE('',#1158,#1159); +#1158 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#1159 = VECTOR('',#1160,1.); +#1160 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1161 = ORIENTED_EDGE('',*,*,#1162,.T.); +#1162 = EDGE_CURVE('',#1153,#1163,#1165,.T.); +#1163 = VERTEX_POINT('',#1164); +#1164 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#1165 = LINE('',#1166,#1167); +#1166 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#1167 = VECTOR('',#1168,1.); +#1168 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1169 = ORIENTED_EDGE('',*,*,#1170,.F.); +#1170 = EDGE_CURVE('',#1171,#1163,#1173,.T.); +#1171 = VERTEX_POINT('',#1172); +#1172 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#1173 = LINE('',#1174,#1175); +#1174 = CARTESIAN_POINT('',(-0.1,-11.5,0.2)); +#1175 = VECTOR('',#1176,1.); +#1176 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1177 = ORIENTED_EDGE('',*,*,#1178,.T.); +#1178 = EDGE_CURVE('',#1171,#1179,#1181,.T.); +#1179 = VERTEX_POINT('',#1180); +#1180 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#1181 = LINE('',#1182,#1183); +#1182 = CARTESIAN_POINT('',(-0.1,-14.45,0.2)); +#1183 = VECTOR('',#1184,1.); +#1184 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1185 = ORIENTED_EDGE('',*,*,#1186,.T.); +#1186 = EDGE_CURVE('',#1179,#1187,#1189,.T.); +#1187 = VERTEX_POINT('',#1188); +#1188 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#1189 = LINE('',#1190,#1191); +#1190 = CARTESIAN_POINT('',(-0.1,-13.55,0.2)); +#1191 = VECTOR('',#1192,1.); +#1192 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1193 = ORIENTED_EDGE('',*,*,#1194,.T.); +#1194 = EDGE_CURVE('',#1187,#1195,#1197,.T.); +#1195 = VERTEX_POINT('',#1196); +#1196 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#1197 = LINE('',#1198,#1199); +#1198 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#1199 = VECTOR('',#1200,1.); +#1200 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1201 = ORIENTED_EDGE('',*,*,#1202,.T.); +#1202 = EDGE_CURVE('',#1195,#1203,#1205,.T.); +#1203 = VERTEX_POINT('',#1204); +#1204 = CARTESIAN_POINT('',(0.1,-14.3,0.2)); +#1205 = LINE('',#1206,#1207); +#1206 = CARTESIAN_POINT('',(0.1,-11.5,0.2)); +#1207 = VECTOR('',#1208,1.); +#1208 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1209 = ORIENTED_EDGE('',*,*,#1210,.T.); +#1210 = EDGE_CURVE('',#1203,#1155,#1211,.T.); +#1211 = LINE('',#1212,#1213); +#1212 = CARTESIAN_POINT('',(0.1,-13.55,0.2)); +#1213 = VECTOR('',#1214,1.); +#1214 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1215 = FACE_BOUND('',#1216,.F.); +#1216 = EDGE_LOOP('',(#1217,#1227,#1235,#1243,#1251,#1259,#1267,#1275)); +#1217 = ORIENTED_EDGE('',*,*,#1218,.F.); +#1218 = EDGE_CURVE('',#1219,#1221,#1223,.T.); +#1219 = VERTEX_POINT('',#1220); +#1220 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#1221 = VERTEX_POINT('',#1222); +#1222 = CARTESIAN_POINT('',(0.1,-12.45,0.2)); +#1223 = LINE('',#1224,#1225); +#1224 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#1225 = VECTOR('',#1226,1.); +#1226 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1227 = ORIENTED_EDGE('',*,*,#1228,.T.); +#1228 = EDGE_CURVE('',#1219,#1229,#1231,.T.); +#1229 = VERTEX_POINT('',#1230); +#1230 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#1231 = LINE('',#1232,#1233); +#1232 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#1233 = VECTOR('',#1234,1.); +#1234 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1235 = ORIENTED_EDGE('',*,*,#1236,.F.); +#1236 = EDGE_CURVE('',#1237,#1229,#1239,.T.); +#1237 = VERTEX_POINT('',#1238); +#1238 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#1239 = LINE('',#1240,#1241); +#1240 = CARTESIAN_POINT('',(-0.1,-10.5,0.2)); +#1241 = VECTOR('',#1242,1.); +#1242 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1243 = ORIENTED_EDGE('',*,*,#1244,.T.); +#1244 = EDGE_CURVE('',#1237,#1245,#1247,.T.); +#1245 = VERTEX_POINT('',#1246); +#1246 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#1247 = LINE('',#1248,#1249); +#1248 = CARTESIAN_POINT('',(-0.1,-12.45,0.2)); +#1249 = VECTOR('',#1250,1.); +#1250 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1251 = ORIENTED_EDGE('',*,*,#1252,.T.); +#1252 = EDGE_CURVE('',#1245,#1253,#1255,.T.); +#1253 = VERTEX_POINT('',#1254); +#1254 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#1255 = LINE('',#1256,#1257); +#1256 = CARTESIAN_POINT('',(-0.1,-11.55,0.2)); +#1257 = VECTOR('',#1258,1.); +#1258 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1259 = ORIENTED_EDGE('',*,*,#1260,.T.); +#1260 = EDGE_CURVE('',#1253,#1261,#1263,.T.); +#1261 = VERTEX_POINT('',#1262); +#1262 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#1263 = LINE('',#1264,#1265); +#1264 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#1265 = VECTOR('',#1266,1.); +#1266 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1267 = ORIENTED_EDGE('',*,*,#1268,.T.); +#1268 = EDGE_CURVE('',#1261,#1269,#1271,.T.); +#1269 = VERTEX_POINT('',#1270); +#1270 = CARTESIAN_POINT('',(0.1,-12.3,0.2)); +#1271 = LINE('',#1272,#1273); +#1272 = CARTESIAN_POINT('',(0.1,-10.5,0.2)); +#1273 = VECTOR('',#1274,1.); +#1274 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1275 = ORIENTED_EDGE('',*,*,#1276,.T.); +#1276 = EDGE_CURVE('',#1269,#1221,#1277,.T.); +#1277 = LINE('',#1278,#1279); +#1278 = CARTESIAN_POINT('',(0.1,-11.55,0.2)); +#1279 = VECTOR('',#1280,1.); +#1280 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1281 = FACE_BOUND('',#1282,.F.); +#1282 = EDGE_LOOP('',(#1283,#1293,#1301,#1309,#1317,#1325,#1333,#1341)); +#1283 = ORIENTED_EDGE('',*,*,#1284,.F.); +#1284 = EDGE_CURVE('',#1285,#1287,#1289,.T.); +#1285 = VERTEX_POINT('',#1286); +#1286 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#1287 = VERTEX_POINT('',#1288); +#1288 = CARTESIAN_POINT('',(0.1,-10.45,0.2)); +#1289 = LINE('',#1290,#1291); +#1290 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#1291 = VECTOR('',#1292,1.); +#1292 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1293 = ORIENTED_EDGE('',*,*,#1294,.T.); +#1294 = EDGE_CURVE('',#1285,#1295,#1297,.T.); +#1295 = VERTEX_POINT('',#1296); +#1296 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#1297 = LINE('',#1298,#1299); +#1298 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#1299 = VECTOR('',#1300,1.); +#1300 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1301 = ORIENTED_EDGE('',*,*,#1302,.F.); +#1302 = EDGE_CURVE('',#1303,#1295,#1305,.T.); +#1303 = VERTEX_POINT('',#1304); +#1304 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#1305 = LINE('',#1306,#1307); +#1306 = CARTESIAN_POINT('',(-0.1,-9.5,0.2)); +#1307 = VECTOR('',#1308,1.); +#1308 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1309 = ORIENTED_EDGE('',*,*,#1310,.T.); +#1310 = EDGE_CURVE('',#1303,#1311,#1313,.T.); +#1311 = VERTEX_POINT('',#1312); +#1312 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#1313 = LINE('',#1314,#1315); +#1314 = CARTESIAN_POINT('',(-0.1,-10.45,0.2)); +#1315 = VECTOR('',#1316,1.); +#1316 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1317 = ORIENTED_EDGE('',*,*,#1318,.T.); +#1318 = EDGE_CURVE('',#1311,#1319,#1321,.T.); +#1319 = VERTEX_POINT('',#1320); +#1320 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#1321 = LINE('',#1322,#1323); +#1322 = CARTESIAN_POINT('',(-0.1,-9.55,0.2)); +#1323 = VECTOR('',#1324,1.); +#1324 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1325 = ORIENTED_EDGE('',*,*,#1326,.T.); +#1326 = EDGE_CURVE('',#1319,#1327,#1329,.T.); +#1327 = VERTEX_POINT('',#1328); +#1328 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#1329 = LINE('',#1330,#1331); +#1330 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#1331 = VECTOR('',#1332,1.); +#1332 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1333 = ORIENTED_EDGE('',*,*,#1334,.T.); +#1334 = EDGE_CURVE('',#1327,#1335,#1337,.T.); +#1335 = VERTEX_POINT('',#1336); +#1336 = CARTESIAN_POINT('',(0.1,-10.3,0.2)); +#1337 = LINE('',#1338,#1339); +#1338 = CARTESIAN_POINT('',(0.1,-9.5,0.2)); +#1339 = VECTOR('',#1340,1.); +#1340 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1341 = ORIENTED_EDGE('',*,*,#1342,.T.); +#1342 = EDGE_CURVE('',#1335,#1287,#1343,.T.); +#1343 = LINE('',#1344,#1345); +#1344 = CARTESIAN_POINT('',(0.1,-9.55,0.2)); +#1345 = VECTOR('',#1346,1.); +#1346 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1347 = FACE_BOUND('',#1348,.F.); +#1348 = EDGE_LOOP('',(#1349,#1359,#1367,#1375,#1383,#1391,#1399,#1407)); +#1349 = ORIENTED_EDGE('',*,*,#1350,.F.); +#1350 = EDGE_CURVE('',#1351,#1353,#1355,.T.); +#1351 = VERTEX_POINT('',#1352); +#1352 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#1353 = VERTEX_POINT('',#1354); +#1354 = CARTESIAN_POINT('',(0.1,-8.45,0.2)); +#1355 = LINE('',#1356,#1357); +#1356 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#1357 = VECTOR('',#1358,1.); +#1358 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1359 = ORIENTED_EDGE('',*,*,#1360,.T.); +#1360 = EDGE_CURVE('',#1351,#1361,#1363,.T.); +#1361 = VERTEX_POINT('',#1362); +#1362 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#1363 = LINE('',#1364,#1365); +#1364 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#1365 = VECTOR('',#1366,1.); +#1366 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1367 = ORIENTED_EDGE('',*,*,#1368,.F.); +#1368 = EDGE_CURVE('',#1369,#1361,#1371,.T.); +#1369 = VERTEX_POINT('',#1370); +#1370 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#1371 = LINE('',#1372,#1373); +#1372 = CARTESIAN_POINT('',(-0.1,-8.5,0.2)); +#1373 = VECTOR('',#1374,1.); +#1374 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1375 = ORIENTED_EDGE('',*,*,#1376,.T.); +#1376 = EDGE_CURVE('',#1369,#1377,#1379,.T.); +#1377 = VERTEX_POINT('',#1378); +#1378 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#1379 = LINE('',#1380,#1381); +#1380 = CARTESIAN_POINT('',(-0.1,-8.45,0.2)); +#1381 = VECTOR('',#1382,1.); +#1382 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1383 = ORIENTED_EDGE('',*,*,#1384,.T.); +#1384 = EDGE_CURVE('',#1377,#1385,#1387,.T.); +#1385 = VERTEX_POINT('',#1386); +#1386 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#1387 = LINE('',#1388,#1389); +#1388 = CARTESIAN_POINT('',(-0.1,-7.55,0.2)); +#1389 = VECTOR('',#1390,1.); +#1390 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1391 = ORIENTED_EDGE('',*,*,#1392,.T.); +#1392 = EDGE_CURVE('',#1385,#1393,#1395,.T.); +#1393 = VERTEX_POINT('',#1394); +#1394 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#1395 = LINE('',#1396,#1397); +#1396 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#1397 = VECTOR('',#1398,1.); +#1398 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1399 = ORIENTED_EDGE('',*,*,#1400,.T.); +#1400 = EDGE_CURVE('',#1393,#1401,#1403,.T.); +#1401 = VERTEX_POINT('',#1402); +#1402 = CARTESIAN_POINT('',(0.1,-8.3,0.2)); +#1403 = LINE('',#1404,#1405); +#1404 = CARTESIAN_POINT('',(0.1,-8.5,0.2)); +#1405 = VECTOR('',#1406,1.); +#1406 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1407 = ORIENTED_EDGE('',*,*,#1408,.T.); +#1408 = EDGE_CURVE('',#1401,#1353,#1409,.T.); +#1409 = LINE('',#1410,#1411); +#1410 = CARTESIAN_POINT('',(0.1,-7.55,0.2)); +#1411 = VECTOR('',#1412,1.); +#1412 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1413 = FACE_BOUND('',#1414,.F.); +#1414 = EDGE_LOOP('',(#1415,#1425,#1433,#1441,#1449,#1457,#1465,#1473)); +#1415 = ORIENTED_EDGE('',*,*,#1416,.F.); +#1416 = EDGE_CURVE('',#1417,#1419,#1421,.T.); +#1417 = VERTEX_POINT('',#1418); +#1418 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#1419 = VERTEX_POINT('',#1420); +#1420 = CARTESIAN_POINT('',(0.1,-6.45,0.2)); +#1421 = LINE('',#1422,#1423); +#1422 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#1423 = VECTOR('',#1424,1.); +#1424 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1425 = ORIENTED_EDGE('',*,*,#1426,.T.); +#1426 = EDGE_CURVE('',#1417,#1427,#1429,.T.); +#1427 = VERTEX_POINT('',#1428); +#1428 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#1429 = LINE('',#1430,#1431); +#1430 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#1431 = VECTOR('',#1432,1.); +#1432 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1433 = ORIENTED_EDGE('',*,*,#1434,.F.); +#1434 = EDGE_CURVE('',#1435,#1427,#1437,.T.); +#1435 = VERTEX_POINT('',#1436); +#1436 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#1437 = LINE('',#1438,#1439); +#1438 = CARTESIAN_POINT('',(-0.1,-7.5,0.2)); +#1439 = VECTOR('',#1440,1.); +#1440 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1441 = ORIENTED_EDGE('',*,*,#1442,.T.); +#1442 = EDGE_CURVE('',#1435,#1443,#1445,.T.); +#1443 = VERTEX_POINT('',#1444); +#1444 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#1445 = LINE('',#1446,#1447); +#1446 = CARTESIAN_POINT('',(-0.1,-6.45,0.2)); +#1447 = VECTOR('',#1448,1.); +#1448 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1449 = ORIENTED_EDGE('',*,*,#1450,.T.); +#1450 = EDGE_CURVE('',#1443,#1451,#1453,.T.); +#1451 = VERTEX_POINT('',#1452); +#1452 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#1453 = LINE('',#1454,#1455); +#1454 = CARTESIAN_POINT('',(-0.1,-5.55,0.2)); +#1455 = VECTOR('',#1456,1.); +#1456 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1457 = ORIENTED_EDGE('',*,*,#1458,.T.); +#1458 = EDGE_CURVE('',#1451,#1459,#1461,.T.); +#1459 = VERTEX_POINT('',#1460); +#1460 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#1461 = LINE('',#1462,#1463); +#1462 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#1463 = VECTOR('',#1464,1.); +#1464 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1465 = ORIENTED_EDGE('',*,*,#1466,.T.); +#1466 = EDGE_CURVE('',#1459,#1467,#1469,.T.); +#1467 = VERTEX_POINT('',#1468); +#1468 = CARTESIAN_POINT('',(0.1,-6.3,0.2)); +#1469 = LINE('',#1470,#1471); +#1470 = CARTESIAN_POINT('',(0.1,-7.5,0.2)); +#1471 = VECTOR('',#1472,1.); +#1472 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1473 = ORIENTED_EDGE('',*,*,#1474,.T.); +#1474 = EDGE_CURVE('',#1467,#1419,#1475,.T.); +#1475 = LINE('',#1476,#1477); +#1476 = CARTESIAN_POINT('',(0.1,-5.55,0.2)); +#1477 = VECTOR('',#1478,1.); +#1478 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1479 = FACE_BOUND('',#1480,.F.); +#1480 = EDGE_LOOP('',(#1481,#1491,#1499,#1507,#1515,#1523,#1531,#1539)); +#1481 = ORIENTED_EDGE('',*,*,#1482,.F.); +#1482 = EDGE_CURVE('',#1483,#1485,#1487,.T.); +#1483 = VERTEX_POINT('',#1484); +#1484 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#1485 = VERTEX_POINT('',#1486); +#1486 = CARTESIAN_POINT('',(0.1,-4.45,0.2)); +#1487 = LINE('',#1488,#1489); +#1488 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#1489 = VECTOR('',#1490,1.); +#1490 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1491 = ORIENTED_EDGE('',*,*,#1492,.T.); +#1492 = EDGE_CURVE('',#1483,#1493,#1495,.T.); +#1493 = VERTEX_POINT('',#1494); +#1494 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#1495 = LINE('',#1496,#1497); +#1496 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#1497 = VECTOR('',#1498,1.); +#1498 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1499 = ORIENTED_EDGE('',*,*,#1500,.F.); +#1500 = EDGE_CURVE('',#1501,#1493,#1503,.T.); +#1501 = VERTEX_POINT('',#1502); +#1502 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#1503 = LINE('',#1504,#1505); +#1504 = CARTESIAN_POINT('',(-0.1,-6.5,0.2)); +#1505 = VECTOR('',#1506,1.); +#1506 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1507 = ORIENTED_EDGE('',*,*,#1508,.T.); +#1508 = EDGE_CURVE('',#1501,#1509,#1511,.T.); +#1509 = VERTEX_POINT('',#1510); +#1510 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#1511 = LINE('',#1512,#1513); +#1512 = CARTESIAN_POINT('',(-0.1,-4.45,0.2)); +#1513 = VECTOR('',#1514,1.); +#1514 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1515 = ORIENTED_EDGE('',*,*,#1516,.T.); +#1516 = EDGE_CURVE('',#1509,#1517,#1519,.T.); +#1517 = VERTEX_POINT('',#1518); +#1518 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#1519 = LINE('',#1520,#1521); +#1520 = CARTESIAN_POINT('',(-0.1,-3.55,0.2)); +#1521 = VECTOR('',#1522,1.); +#1522 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1523 = ORIENTED_EDGE('',*,*,#1524,.T.); +#1524 = EDGE_CURVE('',#1517,#1525,#1527,.T.); +#1525 = VERTEX_POINT('',#1526); +#1526 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#1527 = LINE('',#1528,#1529); +#1528 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#1529 = VECTOR('',#1530,1.); +#1530 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1531 = ORIENTED_EDGE('',*,*,#1532,.T.); +#1532 = EDGE_CURVE('',#1525,#1533,#1535,.T.); +#1533 = VERTEX_POINT('',#1534); +#1534 = CARTESIAN_POINT('',(0.1,-4.3,0.2)); +#1535 = LINE('',#1536,#1537); +#1536 = CARTESIAN_POINT('',(0.1,-6.5,0.2)); +#1537 = VECTOR('',#1538,1.); +#1538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1539 = ORIENTED_EDGE('',*,*,#1540,.T.); +#1540 = EDGE_CURVE('',#1533,#1485,#1541,.T.); +#1541 = LINE('',#1542,#1543); +#1542 = CARTESIAN_POINT('',(0.1,-3.55,0.2)); +#1543 = VECTOR('',#1544,1.); +#1544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1545 = FACE_BOUND('',#1546,.F.); +#1546 = EDGE_LOOP('',(#1547,#1557,#1565,#1573,#1581,#1589,#1597,#1605)); +#1547 = ORIENTED_EDGE('',*,*,#1548,.F.); +#1548 = EDGE_CURVE('',#1549,#1551,#1553,.T.); +#1549 = VERTEX_POINT('',#1550); +#1550 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#1551 = VERTEX_POINT('',#1552); +#1552 = CARTESIAN_POINT('',(0.1,-2.45,0.2)); +#1553 = LINE('',#1554,#1555); +#1554 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#1555 = VECTOR('',#1556,1.); +#1556 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1557 = ORIENTED_EDGE('',*,*,#1558,.T.); +#1558 = EDGE_CURVE('',#1549,#1559,#1561,.T.); +#1559 = VERTEX_POINT('',#1560); +#1560 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#1561 = LINE('',#1562,#1563); +#1562 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#1563 = VECTOR('',#1564,1.); +#1564 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1565 = ORIENTED_EDGE('',*,*,#1566,.F.); +#1566 = EDGE_CURVE('',#1567,#1559,#1569,.T.); +#1567 = VERTEX_POINT('',#1568); +#1568 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#1569 = LINE('',#1570,#1571); +#1570 = CARTESIAN_POINT('',(-0.1,-5.5,0.2)); +#1571 = VECTOR('',#1572,1.); +#1572 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1573 = ORIENTED_EDGE('',*,*,#1574,.T.); +#1574 = EDGE_CURVE('',#1567,#1575,#1577,.T.); +#1575 = VERTEX_POINT('',#1576); +#1576 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#1577 = LINE('',#1578,#1579); +#1578 = CARTESIAN_POINT('',(-0.1,-2.45,0.2)); +#1579 = VECTOR('',#1580,1.); +#1580 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1581 = ORIENTED_EDGE('',*,*,#1582,.T.); +#1582 = EDGE_CURVE('',#1575,#1583,#1585,.T.); +#1583 = VERTEX_POINT('',#1584); +#1584 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#1585 = LINE('',#1586,#1587); +#1586 = CARTESIAN_POINT('',(-0.1,-1.55,0.2)); +#1587 = VECTOR('',#1588,1.); +#1588 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1589 = ORIENTED_EDGE('',*,*,#1590,.T.); +#1590 = EDGE_CURVE('',#1583,#1591,#1593,.T.); +#1591 = VERTEX_POINT('',#1592); +#1592 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#1593 = LINE('',#1594,#1595); +#1594 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#1595 = VECTOR('',#1596,1.); +#1596 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1597 = ORIENTED_EDGE('',*,*,#1598,.T.); +#1598 = EDGE_CURVE('',#1591,#1599,#1601,.T.); +#1599 = VERTEX_POINT('',#1600); +#1600 = CARTESIAN_POINT('',(0.1,-2.3,0.2)); +#1601 = LINE('',#1602,#1603); +#1602 = CARTESIAN_POINT('',(0.1,-5.5,0.2)); +#1603 = VECTOR('',#1604,1.); +#1604 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1605 = ORIENTED_EDGE('',*,*,#1606,.T.); +#1606 = EDGE_CURVE('',#1599,#1551,#1607,.T.); +#1607 = LINE('',#1608,#1609); +#1608 = CARTESIAN_POINT('',(0.1,-1.55,0.2)); +#1609 = VECTOR('',#1610,1.); +#1610 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1611 = FACE_BOUND('',#1612,.F.); +#1612 = EDGE_LOOP('',(#1613,#1623,#1631,#1639,#1647,#1655,#1663,#1671)); +#1613 = ORIENTED_EDGE('',*,*,#1614,.F.); +#1614 = EDGE_CURVE('',#1615,#1617,#1619,.T.); +#1615 = VERTEX_POINT('',#1616); +#1616 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#1617 = VERTEX_POINT('',#1618); +#1618 = CARTESIAN_POINT('',(0.1,-0.45,0.2)); +#1619 = LINE('',#1620,#1621); +#1620 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#1621 = VECTOR('',#1622,1.); +#1622 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1623 = ORIENTED_EDGE('',*,*,#1624,.T.); +#1624 = EDGE_CURVE('',#1615,#1625,#1627,.T.); +#1625 = VERTEX_POINT('',#1626); +#1626 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#1627 = LINE('',#1628,#1629); +#1628 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#1629 = VECTOR('',#1630,1.); +#1630 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1631 = ORIENTED_EDGE('',*,*,#1632,.F.); +#1632 = EDGE_CURVE('',#1633,#1625,#1635,.T.); +#1633 = VERTEX_POINT('',#1634); +#1634 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#1635 = LINE('',#1636,#1637); +#1636 = CARTESIAN_POINT('',(-0.1,-4.5,0.2)); +#1637 = VECTOR('',#1638,1.); +#1638 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1639 = ORIENTED_EDGE('',*,*,#1640,.T.); +#1640 = EDGE_CURVE('',#1633,#1641,#1643,.T.); +#1641 = VERTEX_POINT('',#1642); +#1642 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#1643 = LINE('',#1644,#1645); +#1644 = CARTESIAN_POINT('',(-0.1,-0.45,0.2)); +#1645 = VECTOR('',#1646,1.); +#1646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1647 = ORIENTED_EDGE('',*,*,#1648,.T.); +#1648 = EDGE_CURVE('',#1641,#1649,#1651,.T.); +#1649 = VERTEX_POINT('',#1650); +#1650 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#1651 = LINE('',#1652,#1653); +#1652 = CARTESIAN_POINT('',(-0.1,0.45,0.2)); +#1653 = VECTOR('',#1654,1.); +#1654 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1655 = ORIENTED_EDGE('',*,*,#1656,.T.); +#1656 = EDGE_CURVE('',#1649,#1657,#1659,.T.); +#1657 = VERTEX_POINT('',#1658); +#1658 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#1659 = LINE('',#1660,#1661); +#1660 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#1661 = VECTOR('',#1662,1.); +#1662 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1663 = ORIENTED_EDGE('',*,*,#1664,.T.); +#1664 = EDGE_CURVE('',#1657,#1665,#1667,.T.); +#1665 = VERTEX_POINT('',#1666); +#1666 = CARTESIAN_POINT('',(0.1,-0.3,0.2)); +#1667 = LINE('',#1668,#1669); +#1668 = CARTESIAN_POINT('',(0.1,-4.5,0.2)); +#1669 = VECTOR('',#1670,1.); +#1670 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1671 = ORIENTED_EDGE('',*,*,#1672,.T.); +#1672 = EDGE_CURVE('',#1665,#1617,#1673,.T.); +#1673 = LINE('',#1674,#1675); +#1674 = CARTESIAN_POINT('',(0.1,0.45,0.2)); +#1675 = VECTOR('',#1676,1.); +#1676 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1677 = PLANE('',#1678); +#1678 = AXIS2_PLACEMENT_3D('',#1679,#1680,#1681); +#1679 = CARTESIAN_POINT('',(-9.71445146547E-16,-9.,0.2)); +#1680 = DIRECTION('',(0.,0.,1.)); +#1681 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#1682 = ADVANCED_FACE('',(#1683),#1689,.T.); +#1683 = FACE_BOUND('',#1684,.T.); +#1684 = EDGE_LOOP('',(#1685,#1686,#1687,#1688)); +#1685 = ORIENTED_EDGE('',*,*,#503,.T.); +#1686 = ORIENTED_EDGE('',*,*,#1009,.T.); +#1687 = ORIENTED_EDGE('',*,*,#582,.F.); +#1688 = ORIENTED_EDGE('',*,*,#599,.F.); +#1689 = PLANE('',#1690); +#1690 = AXIS2_PLACEMENT_3D('',#1691,#1692,#1693); +#1691 = CARTESIAN_POINT('',(0.666666666667,-19.,0.)); +#1692 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#1693 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1694 = ADVANCED_FACE('',(#1695),#1701,.F.); +#1695 = FACE_BOUND('',#1696,.F.); +#1696 = EDGE_LOOP('',(#1697,#1698,#1699,#1700)); +#1697 = ORIENTED_EDGE('',*,*,#550,.T.); +#1698 = ORIENTED_EDGE('',*,*,#615,.T.); +#1699 = ORIENTED_EDGE('',*,*,#480,.F.); +#1700 = ORIENTED_EDGE('',*,*,#978,.F.); +#1701 = PLANE('',#1702); +#1702 = AXIS2_PLACEMENT_3D('',#1703,#1704,#1705); +#1703 = CARTESIAN_POINT('',(-1.,1.,0.)); +#1704 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1705 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1706 = ADVANCED_FACE('',(#1707),#1732,.T.); +#1707 = FACE_BOUND('',#1708,.T.); +#1708 = EDGE_LOOP('',(#1709,#1717,#1718,#1726)); +#1709 = ORIENTED_EDGE('',*,*,#1710,.F.); +#1710 = EDGE_CURVE('',#625,#1711,#1713,.T.); +#1711 = VERTEX_POINT('',#1712); +#1712 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#1713 = LINE('',#1714,#1715); +#1714 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#1715 = VECTOR('',#1716,1.); +#1716 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#1717 = ORIENTED_EDGE('',*,*,#624,.T.); +#1718 = ORIENTED_EDGE('',*,*,#1719,.T.); +#1719 = EDGE_CURVE('',#627,#1720,#1722,.T.); +#1720 = VERTEX_POINT('',#1721); +#1721 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#1722 = LINE('',#1723,#1724); +#1723 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#1724 = VECTOR('',#1725,1.); +#1725 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#1726 = ORIENTED_EDGE('',*,*,#1727,.F.); +#1727 = EDGE_CURVE('',#1711,#1720,#1728,.T.); +#1728 = LINE('',#1729,#1730); +#1729 = CARTESIAN_POINT('',(0.3,-18.6,5.3)); +#1730 = VECTOR('',#1731,1.); +#1731 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1732 = PLANE('',#1733); +#1733 = AXIS2_PLACEMENT_3D('',#1734,#1735,#1736); +#1734 = CARTESIAN_POINT('',(0.45,-18.6,5.45)); +#1735 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#1736 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#1737 = ADVANCED_FACE('',(#1738),#1756,.T.); +#1738 = FACE_BOUND('',#1739,.T.); +#1739 = EDGE_LOOP('',(#1740,#1741,#1742,#1750)); +#1740 = ORIENTED_EDGE('',*,*,#1719,.F.); +#1741 = ORIENTED_EDGE('',*,*,#650,.T.); +#1742 = ORIENTED_EDGE('',*,*,#1743,.T.); +#1743 = EDGE_CURVE('',#643,#1744,#1746,.T.); +#1744 = VERTEX_POINT('',#1745); +#1745 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#1746 = LINE('',#1747,#1748); +#1747 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#1748 = VECTOR('',#1749,1.); +#1749 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#1750 = ORIENTED_EDGE('',*,*,#1751,.F.); +#1751 = EDGE_CURVE('',#1720,#1744,#1752,.T.); +#1752 = LINE('',#1753,#1754); +#1753 = CARTESIAN_POINT('',(0.6,-17.7,5.3)); +#1754 = VECTOR('',#1755,1.); +#1755 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#1756 = PLANE('',#1757); +#1757 = AXIS2_PLACEMENT_3D('',#1758,#1759,#1760); +#1758 = CARTESIAN_POINT('',(0.6,-17.55,5.45)); +#1759 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#1760 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#1761 = ADVANCED_FACE('',(#1762),#1780,.T.); +#1762 = FACE_BOUND('',#1763,.T.); +#1763 = EDGE_LOOP('',(#1764,#1765,#1766,#1774)); +#1764 = ORIENTED_EDGE('',*,*,#1743,.F.); +#1765 = ORIENTED_EDGE('',*,*,#642,.T.); +#1766 = ORIENTED_EDGE('',*,*,#1767,.T.); +#1767 = EDGE_CURVE('',#635,#1768,#1770,.T.); +#1768 = VERTEX_POINT('',#1769); +#1769 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#1770 = LINE('',#1771,#1772); +#1771 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#1772 = VECTOR('',#1773,1.); +#1773 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#1774 = ORIENTED_EDGE('',*,*,#1775,.F.); +#1775 = EDGE_CURVE('',#1744,#1768,#1776,.T.); +#1776 = LINE('',#1777,#1778); +#1777 = CARTESIAN_POINT('',(-0.3,-17.4,5.3)); +#1778 = VECTOR('',#1779,1.); +#1779 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1780 = PLANE('',#1781); +#1781 = AXIS2_PLACEMENT_3D('',#1782,#1783,#1784); +#1782 = CARTESIAN_POINT('',(-0.45,-17.4,5.45)); +#1783 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#1784 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#1785 = ADVANCED_FACE('',(#1786),#1797,.T.); +#1786 = FACE_BOUND('',#1787,.T.); +#1787 = EDGE_LOOP('',(#1788,#1789,#1790,#1791)); +#1788 = ORIENTED_EDGE('',*,*,#1767,.F.); +#1789 = ORIENTED_EDGE('',*,*,#634,.T.); +#1790 = ORIENTED_EDGE('',*,*,#1710,.T.); +#1791 = ORIENTED_EDGE('',*,*,#1792,.F.); +#1792 = EDGE_CURVE('',#1768,#1711,#1793,.T.); +#1793 = LINE('',#1794,#1795); +#1794 = CARTESIAN_POINT('',(-0.6,-18.3,5.3)); +#1795 = VECTOR('',#1796,1.); +#1796 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1797 = PLANE('',#1798); +#1798 = AXIS2_PLACEMENT_3D('',#1799,#1800,#1801); +#1799 = CARTESIAN_POINT('',(-0.6,-18.45,5.45)); +#1800 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#1801 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#1802 = ADVANCED_FACE('',(#1803),#1828,.T.); +#1803 = FACE_BOUND('',#1804,.T.); +#1804 = EDGE_LOOP('',(#1805,#1813,#1814,#1822)); +#1805 = ORIENTED_EDGE('',*,*,#1806,.F.); +#1806 = EDGE_CURVE('',#659,#1807,#1809,.T.); +#1807 = VERTEX_POINT('',#1808); +#1808 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#1809 = LINE('',#1810,#1811); +#1810 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#1811 = VECTOR('',#1812,1.); +#1812 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#1813 = ORIENTED_EDGE('',*,*,#658,.T.); +#1814 = ORIENTED_EDGE('',*,*,#1815,.T.); +#1815 = EDGE_CURVE('',#661,#1816,#1818,.T.); +#1816 = VERTEX_POINT('',#1817); +#1817 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#1818 = LINE('',#1819,#1820); +#1819 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#1820 = VECTOR('',#1821,1.); +#1821 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#1822 = ORIENTED_EDGE('',*,*,#1823,.F.); +#1823 = EDGE_CURVE('',#1807,#1816,#1824,.T.); +#1824 = LINE('',#1825,#1826); +#1825 = CARTESIAN_POINT('',(0.3,-16.6,5.3)); +#1826 = VECTOR('',#1827,1.); +#1827 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1828 = PLANE('',#1829); +#1829 = AXIS2_PLACEMENT_3D('',#1830,#1831,#1832); +#1830 = CARTESIAN_POINT('',(0.45,-16.6,5.45)); +#1831 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#1832 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#1833 = ADVANCED_FACE('',(#1834),#1852,.T.); +#1834 = FACE_BOUND('',#1835,.T.); +#1835 = EDGE_LOOP('',(#1836,#1837,#1838,#1846)); +#1836 = ORIENTED_EDGE('',*,*,#1815,.F.); +#1837 = ORIENTED_EDGE('',*,*,#684,.T.); +#1838 = ORIENTED_EDGE('',*,*,#1839,.T.); +#1839 = EDGE_CURVE('',#677,#1840,#1842,.T.); +#1840 = VERTEX_POINT('',#1841); +#1841 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#1842 = LINE('',#1843,#1844); +#1843 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#1844 = VECTOR('',#1845,1.); +#1845 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#1846 = ORIENTED_EDGE('',*,*,#1847,.F.); +#1847 = EDGE_CURVE('',#1816,#1840,#1848,.T.); +#1848 = LINE('',#1849,#1850); +#1849 = CARTESIAN_POINT('',(0.6,-15.7,5.3)); +#1850 = VECTOR('',#1851,1.); +#1851 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#1852 = PLANE('',#1853); +#1853 = AXIS2_PLACEMENT_3D('',#1854,#1855,#1856); +#1854 = CARTESIAN_POINT('',(0.6,-15.55,5.45)); +#1855 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#1856 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#1857 = ADVANCED_FACE('',(#1858),#1876,.T.); +#1858 = FACE_BOUND('',#1859,.T.); +#1859 = EDGE_LOOP('',(#1860,#1861,#1862,#1870)); +#1860 = ORIENTED_EDGE('',*,*,#1839,.F.); +#1861 = ORIENTED_EDGE('',*,*,#676,.T.); +#1862 = ORIENTED_EDGE('',*,*,#1863,.T.); +#1863 = EDGE_CURVE('',#669,#1864,#1866,.T.); +#1864 = VERTEX_POINT('',#1865); +#1865 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#1866 = LINE('',#1867,#1868); +#1867 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#1868 = VECTOR('',#1869,1.); +#1869 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#1870 = ORIENTED_EDGE('',*,*,#1871,.F.); +#1871 = EDGE_CURVE('',#1840,#1864,#1872,.T.); +#1872 = LINE('',#1873,#1874); +#1873 = CARTESIAN_POINT('',(-0.3,-15.4,5.3)); +#1874 = VECTOR('',#1875,1.); +#1875 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1876 = PLANE('',#1877); +#1877 = AXIS2_PLACEMENT_3D('',#1878,#1879,#1880); +#1878 = CARTESIAN_POINT('',(-0.45,-15.4,5.45)); +#1879 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#1880 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#1881 = ADVANCED_FACE('',(#1882),#1893,.T.); +#1882 = FACE_BOUND('',#1883,.T.); +#1883 = EDGE_LOOP('',(#1884,#1885,#1886,#1887)); +#1884 = ORIENTED_EDGE('',*,*,#1863,.F.); +#1885 = ORIENTED_EDGE('',*,*,#668,.T.); +#1886 = ORIENTED_EDGE('',*,*,#1806,.T.); +#1887 = ORIENTED_EDGE('',*,*,#1888,.F.); +#1888 = EDGE_CURVE('',#1864,#1807,#1889,.T.); +#1889 = LINE('',#1890,#1891); +#1890 = CARTESIAN_POINT('',(-0.6,-16.3,5.3)); +#1891 = VECTOR('',#1892,1.); +#1892 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1893 = PLANE('',#1894); +#1894 = AXIS2_PLACEMENT_3D('',#1895,#1896,#1897); +#1895 = CARTESIAN_POINT('',(-0.6,-16.45,5.45)); +#1896 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#1897 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#1898 = ADVANCED_FACE('',(#1899),#1924,.T.); +#1899 = FACE_BOUND('',#1900,.T.); +#1900 = EDGE_LOOP('',(#1901,#1909,#1910,#1918)); +#1901 = ORIENTED_EDGE('',*,*,#1902,.F.); +#1902 = EDGE_CURVE('',#693,#1903,#1905,.T.); +#1903 = VERTEX_POINT('',#1904); +#1904 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#1905 = LINE('',#1906,#1907); +#1906 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#1907 = VECTOR('',#1908,1.); +#1908 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#1909 = ORIENTED_EDGE('',*,*,#692,.T.); +#1910 = ORIENTED_EDGE('',*,*,#1911,.T.); +#1911 = EDGE_CURVE('',#695,#1912,#1914,.T.); +#1912 = VERTEX_POINT('',#1913); +#1913 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#1914 = LINE('',#1915,#1916); +#1915 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#1916 = VECTOR('',#1917,1.); +#1917 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#1918 = ORIENTED_EDGE('',*,*,#1919,.F.); +#1919 = EDGE_CURVE('',#1903,#1912,#1920,.T.); +#1920 = LINE('',#1921,#1922); +#1921 = CARTESIAN_POINT('',(0.3,-14.6,5.3)); +#1922 = VECTOR('',#1923,1.); +#1923 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#1924 = PLANE('',#1925); +#1925 = AXIS2_PLACEMENT_3D('',#1926,#1927,#1928); +#1926 = CARTESIAN_POINT('',(0.45,-14.6,5.45)); +#1927 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#1928 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#1929 = ADVANCED_FACE('',(#1930),#1948,.T.); +#1930 = FACE_BOUND('',#1931,.T.); +#1931 = EDGE_LOOP('',(#1932,#1933,#1934,#1942)); +#1932 = ORIENTED_EDGE('',*,*,#1911,.F.); +#1933 = ORIENTED_EDGE('',*,*,#718,.T.); +#1934 = ORIENTED_EDGE('',*,*,#1935,.T.); +#1935 = EDGE_CURVE('',#711,#1936,#1938,.T.); +#1936 = VERTEX_POINT('',#1937); +#1937 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#1938 = LINE('',#1939,#1940); +#1939 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#1940 = VECTOR('',#1941,1.); +#1941 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#1942 = ORIENTED_EDGE('',*,*,#1943,.F.); +#1943 = EDGE_CURVE('',#1912,#1936,#1944,.T.); +#1944 = LINE('',#1945,#1946); +#1945 = CARTESIAN_POINT('',(0.6,-13.7,5.3)); +#1946 = VECTOR('',#1947,1.); +#1947 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#1948 = PLANE('',#1949); +#1949 = AXIS2_PLACEMENT_3D('',#1950,#1951,#1952); +#1950 = CARTESIAN_POINT('',(0.6,-13.55,5.45)); +#1951 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#1952 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#1953 = ADVANCED_FACE('',(#1954),#1972,.T.); +#1954 = FACE_BOUND('',#1955,.T.); +#1955 = EDGE_LOOP('',(#1956,#1957,#1958,#1966)); +#1956 = ORIENTED_EDGE('',*,*,#1935,.F.); +#1957 = ORIENTED_EDGE('',*,*,#710,.T.); +#1958 = ORIENTED_EDGE('',*,*,#1959,.T.); +#1959 = EDGE_CURVE('',#703,#1960,#1962,.T.); +#1960 = VERTEX_POINT('',#1961); +#1961 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#1962 = LINE('',#1963,#1964); +#1963 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#1964 = VECTOR('',#1965,1.); +#1965 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#1966 = ORIENTED_EDGE('',*,*,#1967,.F.); +#1967 = EDGE_CURVE('',#1936,#1960,#1968,.T.); +#1968 = LINE('',#1969,#1970); +#1969 = CARTESIAN_POINT('',(-0.3,-13.4,5.3)); +#1970 = VECTOR('',#1971,1.); +#1971 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#1972 = PLANE('',#1973); +#1973 = AXIS2_PLACEMENT_3D('',#1974,#1975,#1976); +#1974 = CARTESIAN_POINT('',(-0.45,-13.4,5.45)); +#1975 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#1976 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#1977 = ADVANCED_FACE('',(#1978),#1989,.T.); +#1978 = FACE_BOUND('',#1979,.T.); +#1979 = EDGE_LOOP('',(#1980,#1981,#1982,#1983)); +#1980 = ORIENTED_EDGE('',*,*,#1959,.F.); +#1981 = ORIENTED_EDGE('',*,*,#702,.T.); +#1982 = ORIENTED_EDGE('',*,*,#1902,.T.); +#1983 = ORIENTED_EDGE('',*,*,#1984,.F.); +#1984 = EDGE_CURVE('',#1960,#1903,#1985,.T.); +#1985 = LINE('',#1986,#1987); +#1986 = CARTESIAN_POINT('',(-0.6,-14.3,5.3)); +#1987 = VECTOR('',#1988,1.); +#1988 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#1989 = PLANE('',#1990); +#1990 = AXIS2_PLACEMENT_3D('',#1991,#1992,#1993); +#1991 = CARTESIAN_POINT('',(-0.6,-14.45,5.45)); +#1992 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#1993 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#1994 = ADVANCED_FACE('',(#1995),#2020,.T.); +#1995 = FACE_BOUND('',#1996,.T.); +#1996 = EDGE_LOOP('',(#1997,#2005,#2006,#2014)); +#1997 = ORIENTED_EDGE('',*,*,#1998,.F.); +#1998 = EDGE_CURVE('',#727,#1999,#2001,.T.); +#1999 = VERTEX_POINT('',#2000); +#2000 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#2001 = LINE('',#2002,#2003); +#2002 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#2003 = VECTOR('',#2004,1.); +#2004 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2005 = ORIENTED_EDGE('',*,*,#726,.T.); +#2006 = ORIENTED_EDGE('',*,*,#2007,.T.); +#2007 = EDGE_CURVE('',#729,#2008,#2010,.T.); +#2008 = VERTEX_POINT('',#2009); +#2009 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#2010 = LINE('',#2011,#2012); +#2011 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#2012 = VECTOR('',#2013,1.); +#2013 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2014 = ORIENTED_EDGE('',*,*,#2015,.F.); +#2015 = EDGE_CURVE('',#1999,#2008,#2016,.T.); +#2016 = LINE('',#2017,#2018); +#2017 = CARTESIAN_POINT('',(0.3,-12.6,5.3)); +#2018 = VECTOR('',#2019,1.); +#2019 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2020 = PLANE('',#2021); +#2021 = AXIS2_PLACEMENT_3D('',#2022,#2023,#2024); +#2022 = CARTESIAN_POINT('',(0.45,-12.6,5.45)); +#2023 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2024 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2025 = ADVANCED_FACE('',(#2026),#2044,.T.); +#2026 = FACE_BOUND('',#2027,.T.); +#2027 = EDGE_LOOP('',(#2028,#2029,#2030,#2038)); +#2028 = ORIENTED_EDGE('',*,*,#2007,.F.); +#2029 = ORIENTED_EDGE('',*,*,#752,.T.); +#2030 = ORIENTED_EDGE('',*,*,#2031,.T.); +#2031 = EDGE_CURVE('',#745,#2032,#2034,.T.); +#2032 = VERTEX_POINT('',#2033); +#2033 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#2034 = LINE('',#2035,#2036); +#2035 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#2036 = VECTOR('',#2037,1.); +#2037 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2038 = ORIENTED_EDGE('',*,*,#2039,.F.); +#2039 = EDGE_CURVE('',#2008,#2032,#2040,.T.); +#2040 = LINE('',#2041,#2042); +#2041 = CARTESIAN_POINT('',(0.6,-11.7,5.3)); +#2042 = VECTOR('',#2043,1.); +#2043 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2044 = PLANE('',#2045); +#2045 = AXIS2_PLACEMENT_3D('',#2046,#2047,#2048); +#2046 = CARTESIAN_POINT('',(0.6,-11.55,5.45)); +#2047 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2048 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2049 = ADVANCED_FACE('',(#2050),#2068,.T.); +#2050 = FACE_BOUND('',#2051,.T.); +#2051 = EDGE_LOOP('',(#2052,#2053,#2054,#2062)); +#2052 = ORIENTED_EDGE('',*,*,#2031,.F.); +#2053 = ORIENTED_EDGE('',*,*,#744,.T.); +#2054 = ORIENTED_EDGE('',*,*,#2055,.T.); +#2055 = EDGE_CURVE('',#737,#2056,#2058,.T.); +#2056 = VERTEX_POINT('',#2057); +#2057 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#2058 = LINE('',#2059,#2060); +#2059 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#2060 = VECTOR('',#2061,1.); +#2061 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2062 = ORIENTED_EDGE('',*,*,#2063,.F.); +#2063 = EDGE_CURVE('',#2032,#2056,#2064,.T.); +#2064 = LINE('',#2065,#2066); +#2065 = CARTESIAN_POINT('',(-0.3,-11.4,5.3)); +#2066 = VECTOR('',#2067,1.); +#2067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2068 = PLANE('',#2069); +#2069 = AXIS2_PLACEMENT_3D('',#2070,#2071,#2072); +#2070 = CARTESIAN_POINT('',(-0.45,-11.4,5.45)); +#2071 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2072 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2073 = ADVANCED_FACE('',(#2074),#2085,.T.); +#2074 = FACE_BOUND('',#2075,.T.); +#2075 = EDGE_LOOP('',(#2076,#2077,#2078,#2079)); +#2076 = ORIENTED_EDGE('',*,*,#2055,.F.); +#2077 = ORIENTED_EDGE('',*,*,#736,.T.); +#2078 = ORIENTED_EDGE('',*,*,#1998,.T.); +#2079 = ORIENTED_EDGE('',*,*,#2080,.F.); +#2080 = EDGE_CURVE('',#2056,#1999,#2081,.T.); +#2081 = LINE('',#2082,#2083); +#2082 = CARTESIAN_POINT('',(-0.6,-12.3,5.3)); +#2083 = VECTOR('',#2084,1.); +#2084 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2085 = PLANE('',#2086); +#2086 = AXIS2_PLACEMENT_3D('',#2087,#2088,#2089); +#2087 = CARTESIAN_POINT('',(-0.6,-12.45,5.45)); +#2088 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2089 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2090 = ADVANCED_FACE('',(#2091),#2116,.T.); +#2091 = FACE_BOUND('',#2092,.T.); +#2092 = EDGE_LOOP('',(#2093,#2101,#2102,#2110)); +#2093 = ORIENTED_EDGE('',*,*,#2094,.F.); +#2094 = EDGE_CURVE('',#761,#2095,#2097,.T.); +#2095 = VERTEX_POINT('',#2096); +#2096 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#2097 = LINE('',#2098,#2099); +#2098 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#2099 = VECTOR('',#2100,1.); +#2100 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2101 = ORIENTED_EDGE('',*,*,#760,.T.); +#2102 = ORIENTED_EDGE('',*,*,#2103,.T.); +#2103 = EDGE_CURVE('',#763,#2104,#2106,.T.); +#2104 = VERTEX_POINT('',#2105); +#2105 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#2106 = LINE('',#2107,#2108); +#2107 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#2108 = VECTOR('',#2109,1.); +#2109 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2110 = ORIENTED_EDGE('',*,*,#2111,.F.); +#2111 = EDGE_CURVE('',#2095,#2104,#2112,.T.); +#2112 = LINE('',#2113,#2114); +#2113 = CARTESIAN_POINT('',(0.3,-10.6,5.3)); +#2114 = VECTOR('',#2115,1.); +#2115 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2116 = PLANE('',#2117); +#2117 = AXIS2_PLACEMENT_3D('',#2118,#2119,#2120); +#2118 = CARTESIAN_POINT('',(0.45,-10.6,5.45)); +#2119 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2120 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2121 = ADVANCED_FACE('',(#2122),#2140,.T.); +#2122 = FACE_BOUND('',#2123,.T.); +#2123 = EDGE_LOOP('',(#2124,#2125,#2126,#2134)); +#2124 = ORIENTED_EDGE('',*,*,#2103,.F.); +#2125 = ORIENTED_EDGE('',*,*,#786,.T.); +#2126 = ORIENTED_EDGE('',*,*,#2127,.T.); +#2127 = EDGE_CURVE('',#779,#2128,#2130,.T.); +#2128 = VERTEX_POINT('',#2129); +#2129 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#2130 = LINE('',#2131,#2132); +#2131 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#2132 = VECTOR('',#2133,1.); +#2133 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2134 = ORIENTED_EDGE('',*,*,#2135,.F.); +#2135 = EDGE_CURVE('',#2104,#2128,#2136,.T.); +#2136 = LINE('',#2137,#2138); +#2137 = CARTESIAN_POINT('',(0.6,-9.7,5.3)); +#2138 = VECTOR('',#2139,1.); +#2139 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2140 = PLANE('',#2141); +#2141 = AXIS2_PLACEMENT_3D('',#2142,#2143,#2144); +#2142 = CARTESIAN_POINT('',(0.6,-9.55,5.45)); +#2143 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2144 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2145 = ADVANCED_FACE('',(#2146),#2164,.T.); +#2146 = FACE_BOUND('',#2147,.T.); +#2147 = EDGE_LOOP('',(#2148,#2149,#2150,#2158)); +#2148 = ORIENTED_EDGE('',*,*,#2127,.F.); +#2149 = ORIENTED_EDGE('',*,*,#778,.T.); +#2150 = ORIENTED_EDGE('',*,*,#2151,.T.); +#2151 = EDGE_CURVE('',#771,#2152,#2154,.T.); +#2152 = VERTEX_POINT('',#2153); +#2153 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#2154 = LINE('',#2155,#2156); +#2155 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#2156 = VECTOR('',#2157,1.); +#2157 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2158 = ORIENTED_EDGE('',*,*,#2159,.F.); +#2159 = EDGE_CURVE('',#2128,#2152,#2160,.T.); +#2160 = LINE('',#2161,#2162); +#2161 = CARTESIAN_POINT('',(-0.3,-9.4,5.3)); +#2162 = VECTOR('',#2163,1.); +#2163 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2164 = PLANE('',#2165); +#2165 = AXIS2_PLACEMENT_3D('',#2166,#2167,#2168); +#2166 = CARTESIAN_POINT('',(-0.45,-9.4,5.45)); +#2167 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2168 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2169 = ADVANCED_FACE('',(#2170),#2181,.T.); +#2170 = FACE_BOUND('',#2171,.T.); +#2171 = EDGE_LOOP('',(#2172,#2173,#2174,#2175)); +#2172 = ORIENTED_EDGE('',*,*,#2151,.F.); +#2173 = ORIENTED_EDGE('',*,*,#770,.T.); +#2174 = ORIENTED_EDGE('',*,*,#2094,.T.); +#2175 = ORIENTED_EDGE('',*,*,#2176,.F.); +#2176 = EDGE_CURVE('',#2152,#2095,#2177,.T.); +#2177 = LINE('',#2178,#2179); +#2178 = CARTESIAN_POINT('',(-0.6,-10.3,5.3)); +#2179 = VECTOR('',#2180,1.); +#2180 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2181 = PLANE('',#2182); +#2182 = AXIS2_PLACEMENT_3D('',#2183,#2184,#2185); +#2183 = CARTESIAN_POINT('',(-0.6,-10.45,5.45)); +#2184 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2185 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2186 = ADVANCED_FACE('',(#2187),#2212,.T.); +#2187 = FACE_BOUND('',#2188,.T.); +#2188 = EDGE_LOOP('',(#2189,#2197,#2198,#2206)); +#2189 = ORIENTED_EDGE('',*,*,#2190,.F.); +#2190 = EDGE_CURVE('',#795,#2191,#2193,.T.); +#2191 = VERTEX_POINT('',#2192); +#2192 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#2193 = LINE('',#2194,#2195); +#2194 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#2195 = VECTOR('',#2196,1.); +#2196 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2197 = ORIENTED_EDGE('',*,*,#794,.T.); +#2198 = ORIENTED_EDGE('',*,*,#2199,.T.); +#2199 = EDGE_CURVE('',#797,#2200,#2202,.T.); +#2200 = VERTEX_POINT('',#2201); +#2201 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#2202 = LINE('',#2203,#2204); +#2203 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#2204 = VECTOR('',#2205,1.); +#2205 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2206 = ORIENTED_EDGE('',*,*,#2207,.F.); +#2207 = EDGE_CURVE('',#2191,#2200,#2208,.T.); +#2208 = LINE('',#2209,#2210); +#2209 = CARTESIAN_POINT('',(0.3,-8.6,5.3)); +#2210 = VECTOR('',#2211,1.); +#2211 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2212 = PLANE('',#2213); +#2213 = AXIS2_PLACEMENT_3D('',#2214,#2215,#2216); +#2214 = CARTESIAN_POINT('',(0.45,-8.6,5.45)); +#2215 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2216 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2217 = ADVANCED_FACE('',(#2218),#2236,.T.); +#2218 = FACE_BOUND('',#2219,.T.); +#2219 = EDGE_LOOP('',(#2220,#2221,#2222,#2230)); +#2220 = ORIENTED_EDGE('',*,*,#2199,.F.); +#2221 = ORIENTED_EDGE('',*,*,#820,.T.); +#2222 = ORIENTED_EDGE('',*,*,#2223,.T.); +#2223 = EDGE_CURVE('',#813,#2224,#2226,.T.); +#2224 = VERTEX_POINT('',#2225); +#2225 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#2226 = LINE('',#2227,#2228); +#2227 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#2228 = VECTOR('',#2229,1.); +#2229 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2230 = ORIENTED_EDGE('',*,*,#2231,.F.); +#2231 = EDGE_CURVE('',#2200,#2224,#2232,.T.); +#2232 = LINE('',#2233,#2234); +#2233 = CARTESIAN_POINT('',(0.6,-7.7,5.3)); +#2234 = VECTOR('',#2235,1.); +#2235 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2236 = PLANE('',#2237); +#2237 = AXIS2_PLACEMENT_3D('',#2238,#2239,#2240); +#2238 = CARTESIAN_POINT('',(0.6,-7.55,5.45)); +#2239 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2240 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2241 = ADVANCED_FACE('',(#2242),#2260,.T.); +#2242 = FACE_BOUND('',#2243,.T.); +#2243 = EDGE_LOOP('',(#2244,#2245,#2246,#2254)); +#2244 = ORIENTED_EDGE('',*,*,#2223,.F.); +#2245 = ORIENTED_EDGE('',*,*,#812,.T.); +#2246 = ORIENTED_EDGE('',*,*,#2247,.T.); +#2247 = EDGE_CURVE('',#805,#2248,#2250,.T.); +#2248 = VERTEX_POINT('',#2249); +#2249 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#2250 = LINE('',#2251,#2252); +#2251 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#2252 = VECTOR('',#2253,1.); +#2253 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2254 = ORIENTED_EDGE('',*,*,#2255,.F.); +#2255 = EDGE_CURVE('',#2224,#2248,#2256,.T.); +#2256 = LINE('',#2257,#2258); +#2257 = CARTESIAN_POINT('',(-0.3,-7.4,5.3)); +#2258 = VECTOR('',#2259,1.); +#2259 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2260 = PLANE('',#2261); +#2261 = AXIS2_PLACEMENT_3D('',#2262,#2263,#2264); +#2262 = CARTESIAN_POINT('',(-0.45,-7.4,5.45)); +#2263 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2264 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2265 = ADVANCED_FACE('',(#2266),#2277,.T.); +#2266 = FACE_BOUND('',#2267,.T.); +#2267 = EDGE_LOOP('',(#2268,#2269,#2270,#2271)); +#2268 = ORIENTED_EDGE('',*,*,#2247,.F.); +#2269 = ORIENTED_EDGE('',*,*,#804,.T.); +#2270 = ORIENTED_EDGE('',*,*,#2190,.T.); +#2271 = ORIENTED_EDGE('',*,*,#2272,.F.); +#2272 = EDGE_CURVE('',#2248,#2191,#2273,.T.); +#2273 = LINE('',#2274,#2275); +#2274 = CARTESIAN_POINT('',(-0.6,-8.3,5.3)); +#2275 = VECTOR('',#2276,1.); +#2276 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2277 = PLANE('',#2278); +#2278 = AXIS2_PLACEMENT_3D('',#2279,#2280,#2281); +#2279 = CARTESIAN_POINT('',(-0.6,-8.45,5.45)); +#2280 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2281 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2282 = ADVANCED_FACE('',(#2283),#2308,.T.); +#2283 = FACE_BOUND('',#2284,.T.); +#2284 = EDGE_LOOP('',(#2285,#2293,#2294,#2302)); +#2285 = ORIENTED_EDGE('',*,*,#2286,.F.); +#2286 = EDGE_CURVE('',#829,#2287,#2289,.T.); +#2287 = VERTEX_POINT('',#2288); +#2288 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#2289 = LINE('',#2290,#2291); +#2290 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#2291 = VECTOR('',#2292,1.); +#2292 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2293 = ORIENTED_EDGE('',*,*,#828,.T.); +#2294 = ORIENTED_EDGE('',*,*,#2295,.T.); +#2295 = EDGE_CURVE('',#831,#2296,#2298,.T.); +#2296 = VERTEX_POINT('',#2297); +#2297 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#2298 = LINE('',#2299,#2300); +#2299 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#2300 = VECTOR('',#2301,1.); +#2301 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2302 = ORIENTED_EDGE('',*,*,#2303,.F.); +#2303 = EDGE_CURVE('',#2287,#2296,#2304,.T.); +#2304 = LINE('',#2305,#2306); +#2305 = CARTESIAN_POINT('',(0.3,-6.6,5.3)); +#2306 = VECTOR('',#2307,1.); +#2307 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2308 = PLANE('',#2309); +#2309 = AXIS2_PLACEMENT_3D('',#2310,#2311,#2312); +#2310 = CARTESIAN_POINT('',(0.45,-6.6,5.45)); +#2311 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2312 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2313 = ADVANCED_FACE('',(#2314),#2332,.T.); +#2314 = FACE_BOUND('',#2315,.T.); +#2315 = EDGE_LOOP('',(#2316,#2317,#2318,#2326)); +#2316 = ORIENTED_EDGE('',*,*,#2295,.F.); +#2317 = ORIENTED_EDGE('',*,*,#854,.T.); +#2318 = ORIENTED_EDGE('',*,*,#2319,.T.); +#2319 = EDGE_CURVE('',#847,#2320,#2322,.T.); +#2320 = VERTEX_POINT('',#2321); +#2321 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#2322 = LINE('',#2323,#2324); +#2323 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#2324 = VECTOR('',#2325,1.); +#2325 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2326 = ORIENTED_EDGE('',*,*,#2327,.F.); +#2327 = EDGE_CURVE('',#2296,#2320,#2328,.T.); +#2328 = LINE('',#2329,#2330); +#2329 = CARTESIAN_POINT('',(0.6,-5.7,5.3)); +#2330 = VECTOR('',#2331,1.); +#2331 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2332 = PLANE('',#2333); +#2333 = AXIS2_PLACEMENT_3D('',#2334,#2335,#2336); +#2334 = CARTESIAN_POINT('',(0.6,-5.55,5.45)); +#2335 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2336 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2337 = ADVANCED_FACE('',(#2338),#2356,.T.); +#2338 = FACE_BOUND('',#2339,.T.); +#2339 = EDGE_LOOP('',(#2340,#2341,#2342,#2350)); +#2340 = ORIENTED_EDGE('',*,*,#2319,.F.); +#2341 = ORIENTED_EDGE('',*,*,#846,.T.); +#2342 = ORIENTED_EDGE('',*,*,#2343,.T.); +#2343 = EDGE_CURVE('',#839,#2344,#2346,.T.); +#2344 = VERTEX_POINT('',#2345); +#2345 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#2346 = LINE('',#2347,#2348); +#2347 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#2348 = VECTOR('',#2349,1.); +#2349 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2350 = ORIENTED_EDGE('',*,*,#2351,.F.); +#2351 = EDGE_CURVE('',#2320,#2344,#2352,.T.); +#2352 = LINE('',#2353,#2354); +#2353 = CARTESIAN_POINT('',(-0.3,-5.4,5.3)); +#2354 = VECTOR('',#2355,1.); +#2355 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2356 = PLANE('',#2357); +#2357 = AXIS2_PLACEMENT_3D('',#2358,#2359,#2360); +#2358 = CARTESIAN_POINT('',(-0.45,-5.4,5.45)); +#2359 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2360 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2361 = ADVANCED_FACE('',(#2362),#2373,.T.); +#2362 = FACE_BOUND('',#2363,.T.); +#2363 = EDGE_LOOP('',(#2364,#2365,#2366,#2367)); +#2364 = ORIENTED_EDGE('',*,*,#2343,.F.); +#2365 = ORIENTED_EDGE('',*,*,#838,.T.); +#2366 = ORIENTED_EDGE('',*,*,#2286,.T.); +#2367 = ORIENTED_EDGE('',*,*,#2368,.F.); +#2368 = EDGE_CURVE('',#2344,#2287,#2369,.T.); +#2369 = LINE('',#2370,#2371); +#2370 = CARTESIAN_POINT('',(-0.6,-6.3,5.3)); +#2371 = VECTOR('',#2372,1.); +#2372 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2373 = PLANE('',#2374); +#2374 = AXIS2_PLACEMENT_3D('',#2375,#2376,#2377); +#2375 = CARTESIAN_POINT('',(-0.6,-6.45,5.45)); +#2376 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2377 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2378 = ADVANCED_FACE('',(#2379),#2404,.T.); +#2379 = FACE_BOUND('',#2380,.T.); +#2380 = EDGE_LOOP('',(#2381,#2389,#2390,#2398)); +#2381 = ORIENTED_EDGE('',*,*,#2382,.F.); +#2382 = EDGE_CURVE('',#863,#2383,#2385,.T.); +#2383 = VERTEX_POINT('',#2384); +#2384 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#2385 = LINE('',#2386,#2387); +#2386 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#2387 = VECTOR('',#2388,1.); +#2388 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2389 = ORIENTED_EDGE('',*,*,#862,.T.); +#2390 = ORIENTED_EDGE('',*,*,#2391,.T.); +#2391 = EDGE_CURVE('',#865,#2392,#2394,.T.); +#2392 = VERTEX_POINT('',#2393); +#2393 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#2394 = LINE('',#2395,#2396); +#2395 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#2396 = VECTOR('',#2397,1.); +#2397 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2398 = ORIENTED_EDGE('',*,*,#2399,.F.); +#2399 = EDGE_CURVE('',#2383,#2392,#2400,.T.); +#2400 = LINE('',#2401,#2402); +#2401 = CARTESIAN_POINT('',(0.3,-4.6,5.3)); +#2402 = VECTOR('',#2403,1.); +#2403 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2404 = PLANE('',#2405); +#2405 = AXIS2_PLACEMENT_3D('',#2406,#2407,#2408); +#2406 = CARTESIAN_POINT('',(0.45,-4.6,5.45)); +#2407 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2408 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2409 = ADVANCED_FACE('',(#2410),#2428,.T.); +#2410 = FACE_BOUND('',#2411,.T.); +#2411 = EDGE_LOOP('',(#2412,#2413,#2414,#2422)); +#2412 = ORIENTED_EDGE('',*,*,#2391,.F.); +#2413 = ORIENTED_EDGE('',*,*,#888,.T.); +#2414 = ORIENTED_EDGE('',*,*,#2415,.T.); +#2415 = EDGE_CURVE('',#881,#2416,#2418,.T.); +#2416 = VERTEX_POINT('',#2417); +#2417 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#2418 = LINE('',#2419,#2420); +#2419 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#2420 = VECTOR('',#2421,1.); +#2421 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2422 = ORIENTED_EDGE('',*,*,#2423,.F.); +#2423 = EDGE_CURVE('',#2392,#2416,#2424,.T.); +#2424 = LINE('',#2425,#2426); +#2425 = CARTESIAN_POINT('',(0.6,-3.7,5.3)); +#2426 = VECTOR('',#2427,1.); +#2427 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2428 = PLANE('',#2429); +#2429 = AXIS2_PLACEMENT_3D('',#2430,#2431,#2432); +#2430 = CARTESIAN_POINT('',(0.6,-3.55,5.45)); +#2431 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2432 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2433 = ADVANCED_FACE('',(#2434),#2452,.T.); +#2434 = FACE_BOUND('',#2435,.T.); +#2435 = EDGE_LOOP('',(#2436,#2437,#2438,#2446)); +#2436 = ORIENTED_EDGE('',*,*,#2415,.F.); +#2437 = ORIENTED_EDGE('',*,*,#880,.T.); +#2438 = ORIENTED_EDGE('',*,*,#2439,.T.); +#2439 = EDGE_CURVE('',#873,#2440,#2442,.T.); +#2440 = VERTEX_POINT('',#2441); +#2441 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#2442 = LINE('',#2443,#2444); +#2443 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#2444 = VECTOR('',#2445,1.); +#2445 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2446 = ORIENTED_EDGE('',*,*,#2447,.F.); +#2447 = EDGE_CURVE('',#2416,#2440,#2448,.T.); +#2448 = LINE('',#2449,#2450); +#2449 = CARTESIAN_POINT('',(-0.3,-3.4,5.3)); +#2450 = VECTOR('',#2451,1.); +#2451 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2452 = PLANE('',#2453); +#2453 = AXIS2_PLACEMENT_3D('',#2454,#2455,#2456); +#2454 = CARTESIAN_POINT('',(-0.45,-3.4,5.45)); +#2455 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2456 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2457 = ADVANCED_FACE('',(#2458),#2469,.T.); +#2458 = FACE_BOUND('',#2459,.T.); +#2459 = EDGE_LOOP('',(#2460,#2461,#2462,#2463)); +#2460 = ORIENTED_EDGE('',*,*,#2439,.F.); +#2461 = ORIENTED_EDGE('',*,*,#872,.T.); +#2462 = ORIENTED_EDGE('',*,*,#2382,.T.); +#2463 = ORIENTED_EDGE('',*,*,#2464,.F.); +#2464 = EDGE_CURVE('',#2440,#2383,#2465,.T.); +#2465 = LINE('',#2466,#2467); +#2466 = CARTESIAN_POINT('',(-0.6,-4.3,5.3)); +#2467 = VECTOR('',#2468,1.); +#2468 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2469 = PLANE('',#2470); +#2470 = AXIS2_PLACEMENT_3D('',#2471,#2472,#2473); +#2471 = CARTESIAN_POINT('',(-0.6,-4.45,5.45)); +#2472 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2473 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2474 = ADVANCED_FACE('',(#2475),#2500,.T.); +#2475 = FACE_BOUND('',#2476,.T.); +#2476 = EDGE_LOOP('',(#2477,#2485,#2486,#2494)); +#2477 = ORIENTED_EDGE('',*,*,#2478,.F.); +#2478 = EDGE_CURVE('',#897,#2479,#2481,.T.); +#2479 = VERTEX_POINT('',#2480); +#2480 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#2481 = LINE('',#2482,#2483); +#2482 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#2483 = VECTOR('',#2484,1.); +#2484 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2485 = ORIENTED_EDGE('',*,*,#896,.T.); +#2486 = ORIENTED_EDGE('',*,*,#2487,.T.); +#2487 = EDGE_CURVE('',#899,#2488,#2490,.T.); +#2488 = VERTEX_POINT('',#2489); +#2489 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#2490 = LINE('',#2491,#2492); +#2491 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#2492 = VECTOR('',#2493,1.); +#2493 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2494 = ORIENTED_EDGE('',*,*,#2495,.F.); +#2495 = EDGE_CURVE('',#2479,#2488,#2496,.T.); +#2496 = LINE('',#2497,#2498); +#2497 = CARTESIAN_POINT('',(0.3,-2.6,5.3)); +#2498 = VECTOR('',#2499,1.); +#2499 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2500 = PLANE('',#2501); +#2501 = AXIS2_PLACEMENT_3D('',#2502,#2503,#2504); +#2502 = CARTESIAN_POINT('',(0.45,-2.6,5.45)); +#2503 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2504 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2505 = ADVANCED_FACE('',(#2506),#2524,.T.); +#2506 = FACE_BOUND('',#2507,.T.); +#2507 = EDGE_LOOP('',(#2508,#2509,#2510,#2518)); +#2508 = ORIENTED_EDGE('',*,*,#2487,.F.); +#2509 = ORIENTED_EDGE('',*,*,#922,.T.); +#2510 = ORIENTED_EDGE('',*,*,#2511,.T.); +#2511 = EDGE_CURVE('',#915,#2512,#2514,.T.); +#2512 = VERTEX_POINT('',#2513); +#2513 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#2514 = LINE('',#2515,#2516); +#2515 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#2516 = VECTOR('',#2517,1.); +#2517 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2518 = ORIENTED_EDGE('',*,*,#2519,.F.); +#2519 = EDGE_CURVE('',#2488,#2512,#2520,.T.); +#2520 = LINE('',#2521,#2522); +#2521 = CARTESIAN_POINT('',(0.6,-1.7,5.3)); +#2522 = VECTOR('',#2523,1.); +#2523 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2524 = PLANE('',#2525); +#2525 = AXIS2_PLACEMENT_3D('',#2526,#2527,#2528); +#2526 = CARTESIAN_POINT('',(0.6,-1.55,5.45)); +#2527 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2528 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2529 = ADVANCED_FACE('',(#2530),#2548,.T.); +#2530 = FACE_BOUND('',#2531,.T.); +#2531 = EDGE_LOOP('',(#2532,#2533,#2534,#2542)); +#2532 = ORIENTED_EDGE('',*,*,#2511,.F.); +#2533 = ORIENTED_EDGE('',*,*,#914,.T.); +#2534 = ORIENTED_EDGE('',*,*,#2535,.T.); +#2535 = EDGE_CURVE('',#907,#2536,#2538,.T.); +#2536 = VERTEX_POINT('',#2537); +#2537 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#2538 = LINE('',#2539,#2540); +#2539 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#2540 = VECTOR('',#2541,1.); +#2541 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2542 = ORIENTED_EDGE('',*,*,#2543,.F.); +#2543 = EDGE_CURVE('',#2512,#2536,#2544,.T.); +#2544 = LINE('',#2545,#2546); +#2545 = CARTESIAN_POINT('',(-0.3,-1.4,5.3)); +#2546 = VECTOR('',#2547,1.); +#2547 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2548 = PLANE('',#2549); +#2549 = AXIS2_PLACEMENT_3D('',#2550,#2551,#2552); +#2550 = CARTESIAN_POINT('',(-0.45,-1.4,5.45)); +#2551 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2552 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2553 = ADVANCED_FACE('',(#2554),#2565,.T.); +#2554 = FACE_BOUND('',#2555,.T.); +#2555 = EDGE_LOOP('',(#2556,#2557,#2558,#2559)); +#2556 = ORIENTED_EDGE('',*,*,#2535,.F.); +#2557 = ORIENTED_EDGE('',*,*,#906,.T.); +#2558 = ORIENTED_EDGE('',*,*,#2478,.T.); +#2559 = ORIENTED_EDGE('',*,*,#2560,.F.); +#2560 = EDGE_CURVE('',#2536,#2479,#2561,.T.); +#2561 = LINE('',#2562,#2563); +#2562 = CARTESIAN_POINT('',(-0.6,-2.3,5.3)); +#2563 = VECTOR('',#2564,1.); +#2564 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2565 = PLANE('',#2566); +#2566 = AXIS2_PLACEMENT_3D('',#2567,#2568,#2569); +#2567 = CARTESIAN_POINT('',(-0.6,-2.45,5.45)); +#2568 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2569 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2570 = ADVANCED_FACE('',(#2571),#2596,.T.); +#2571 = FACE_BOUND('',#2572,.T.); +#2572 = EDGE_LOOP('',(#2573,#2581,#2582,#2590)); +#2573 = ORIENTED_EDGE('',*,*,#2574,.F.); +#2574 = EDGE_CURVE('',#931,#2575,#2577,.T.); +#2575 = VERTEX_POINT('',#2576); +#2576 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#2577 = LINE('',#2578,#2579); +#2578 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#2579 = VECTOR('',#2580,1.); +#2580 = DIRECTION('',(-0.57735026919,0.57735026919,-0.57735026919)); +#2581 = ORIENTED_EDGE('',*,*,#930,.T.); +#2582 = ORIENTED_EDGE('',*,*,#2583,.T.); +#2583 = EDGE_CURVE('',#933,#2584,#2586,.T.); +#2584 = VERTEX_POINT('',#2585); +#2585 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#2586 = LINE('',#2587,#2588); +#2587 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#2588 = VECTOR('',#2589,1.); +#2589 = DIRECTION('',(-0.57735026919,-0.57735026919,-0.57735026919)); +#2590 = ORIENTED_EDGE('',*,*,#2591,.F.); +#2591 = EDGE_CURVE('',#2575,#2584,#2592,.T.); +#2592 = LINE('',#2593,#2594); +#2593 = CARTESIAN_POINT('',(0.3,-0.6,5.3)); +#2594 = VECTOR('',#2595,1.); +#2595 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2596 = PLANE('',#2597); +#2597 = AXIS2_PLACEMENT_3D('',#2598,#2599,#2600); +#2598 = CARTESIAN_POINT('',(0.45,-0.6,5.45)); +#2599 = DIRECTION('',(-0.707106781187,7.850462293414E-17,0.707106781187) + ); +#2600 = DIRECTION('',(1.110223024625E-16,1.,2.68018785873E-29)); +#2601 = ADVANCED_FACE('',(#2602),#2620,.T.); +#2602 = FACE_BOUND('',#2603,.T.); +#2603 = EDGE_LOOP('',(#2604,#2605,#2606,#2614)); +#2604 = ORIENTED_EDGE('',*,*,#2583,.F.); +#2605 = ORIENTED_EDGE('',*,*,#956,.T.); +#2606 = ORIENTED_EDGE('',*,*,#2607,.T.); +#2607 = EDGE_CURVE('',#949,#2608,#2610,.T.); +#2608 = VERTEX_POINT('',#2609); +#2609 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#2610 = LINE('',#2611,#2612); +#2611 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#2612 = VECTOR('',#2613,1.); +#2613 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#2614 = ORIENTED_EDGE('',*,*,#2615,.F.); +#2615 = EDGE_CURVE('',#2584,#2608,#2616,.T.); +#2616 = LINE('',#2617,#2618); +#2617 = CARTESIAN_POINT('',(0.6,0.3,5.3)); +#2618 = VECTOR('',#2619,1.); +#2619 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2620 = PLANE('',#2621); +#2621 = AXIS2_PLACEMENT_3D('',#2622,#2623,#2624); +#2622 = CARTESIAN_POINT('',(0.6,0.45,5.45)); +#2623 = DIRECTION('',(-7.503205488379E-17,-0.707106781187,0.707106781187 + )); +#2624 = DIRECTION('',(-1.,1.08566826046E-16,2.455476416576E-18)); +#2625 = ADVANCED_FACE('',(#2626),#2644,.T.); +#2626 = FACE_BOUND('',#2627,.T.); +#2627 = EDGE_LOOP('',(#2628,#2629,#2630,#2638)); +#2628 = ORIENTED_EDGE('',*,*,#2607,.F.); +#2629 = ORIENTED_EDGE('',*,*,#948,.T.); +#2630 = ORIENTED_EDGE('',*,*,#2631,.T.); +#2631 = EDGE_CURVE('',#941,#2632,#2634,.T.); +#2632 = VERTEX_POINT('',#2633); +#2633 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#2634 = LINE('',#2635,#2636); +#2635 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#2636 = VECTOR('',#2637,1.); +#2637 = DIRECTION('',(0.57735026919,0.57735026919,-0.57735026919)); +#2638 = ORIENTED_EDGE('',*,*,#2639,.F.); +#2639 = EDGE_CURVE('',#2608,#2632,#2640,.T.); +#2640 = LINE('',#2641,#2642); +#2641 = CARTESIAN_POINT('',(-0.3,0.6,5.3)); +#2642 = VECTOR('',#2643,1.); +#2643 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2644 = PLANE('',#2645); +#2645 = AXIS2_PLACEMENT_3D('',#2646,#2647,#2648); +#2646 = CARTESIAN_POINT('',(-0.45,0.6,5.45)); +#2647 = DIRECTION('',(0.707106781187,-8.197719098449E-17,0.707106781187) + ); +#2648 = DIRECTION('',(-1.13477778879E-16,-1.,-2.455476416522E-18)); +#2649 = ADVANCED_FACE('',(#2650),#2661,.T.); +#2650 = FACE_BOUND('',#2651,.T.); +#2651 = EDGE_LOOP('',(#2652,#2653,#2654,#2655)); +#2652 = ORIENTED_EDGE('',*,*,#2631,.F.); +#2653 = ORIENTED_EDGE('',*,*,#940,.T.); +#2654 = ORIENTED_EDGE('',*,*,#2574,.T.); +#2655 = ORIENTED_EDGE('',*,*,#2656,.F.); +#2656 = EDGE_CURVE('',#2632,#2575,#2657,.T.); +#2657 = LINE('',#2658,#2659); +#2658 = CARTESIAN_POINT('',(-0.6,-0.3,5.3)); +#2659 = VECTOR('',#2660,1.); +#2660 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2661 = PLANE('',#2662); +#2662 = AXIS2_PLACEMENT_3D('',#2663,#2664,#2665); +#2663 = CARTESIAN_POINT('',(-0.6,-0.45,5.45)); +#2664 = DIRECTION('',(7.503205488379E-17,0.707106781187,0.707106781187) + ); +#2665 = DIRECTION('',(1.,-1.08566826046E-16,2.455476416576E-18)); +#2666 = ADVANCED_FACE('',(#2667),#2678,.T.); +#2667 = FACE_BOUND('',#2668,.T.); +#2668 = EDGE_LOOP('',(#2669,#2670,#2671,#2677)); +#2669 = ORIENTED_EDGE('',*,*,#1020,.F.); +#2670 = ORIENTED_EDGE('',*,*,#1030,.T.); +#2671 = ORIENTED_EDGE('',*,*,#2672,.T.); +#2672 = EDGE_CURVE('',#1031,#1071,#2673,.T.); +#2673 = LINE('',#2674,#2675); +#2674 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#2675 = VECTOR('',#2676,1.); +#2676 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2677 = ORIENTED_EDGE('',*,*,#1078,.T.); +#2678 = PLANE('',#2679); +#2679 = AXIS2_PLACEMENT_3D('',#2680,#2681,#2682); +#2680 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#2681 = DIRECTION('',(0.,-0.,-1.)); +#2682 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2683 = ADVANCED_FACE('',(#2684),#2725,.F.); +#2684 = FACE_BOUND('',#2685,.F.); +#2685 = EDGE_LOOP('',(#2686,#2694,#2695,#2703,#2711,#2719)); +#2686 = ORIENTED_EDGE('',*,*,#2687,.T.); +#2687 = EDGE_CURVE('',#2688,#1071,#2690,.T.); +#2688 = VERTEX_POINT('',#2689); +#2689 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#2690 = LINE('',#2691,#2692); +#2691 = CARTESIAN_POINT('',(0.1,-18.3,-2.1)); +#2692 = VECTOR('',#2693,1.); +#2693 = DIRECTION('',(0.,0.,1.)); +#2694 = ORIENTED_EDGE('',*,*,#1070,.F.); +#2695 = ORIENTED_EDGE('',*,*,#2696,.T.); +#2696 = EDGE_CURVE('',#1063,#2697,#2699,.T.); +#2697 = VERTEX_POINT('',#2698); +#2698 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#2699 = LINE('',#2700,#2701); +#2700 = CARTESIAN_POINT('',(0.1,-17.7,0.2)); +#2701 = VECTOR('',#2702,1.); +#2702 = DIRECTION('',(0.,0.,-1.)); +#2703 = ORIENTED_EDGE('',*,*,#2704,.T.); +#2704 = EDGE_CURVE('',#2697,#2705,#2707,.T.); +#2705 = VERTEX_POINT('',#2706); +#2706 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#2707 = LINE('',#2708,#2709); +#2708 = CARTESIAN_POINT('',(0.1,-17.7,-2.1)); +#2709 = VECTOR('',#2710,1.); +#2710 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#2711 = ORIENTED_EDGE('',*,*,#2712,.T.); +#2712 = EDGE_CURVE('',#2705,#2713,#2715,.T.); +#2713 = VERTEX_POINT('',#2714); +#2714 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#2715 = LINE('',#2716,#2717); +#2716 = CARTESIAN_POINT('',(0.1,-17.85,-2.7)); +#2717 = VECTOR('',#2718,1.); +#2718 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2719 = ORIENTED_EDGE('',*,*,#2720,.T.); +#2720 = EDGE_CURVE('',#2713,#2688,#2721,.T.); +#2721 = LINE('',#2722,#2723); +#2722 = CARTESIAN_POINT('',(0.1,-18.15,-2.7)); +#2723 = VECTOR('',#2724,1.); +#2724 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#2725 = PLANE('',#2726); +#2726 = AXIS2_PLACEMENT_3D('',#2727,#2728,#2729); +#2727 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#2728 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2729 = DIRECTION('',(0.,0.,1.)); +#2730 = ADVANCED_FACE('',(#2731),#2742,.T.); +#2731 = FACE_BOUND('',#2732,.T.); +#2732 = EDGE_LOOP('',(#2733,#2739,#2740,#2741)); +#2733 = ORIENTED_EDGE('',*,*,#2734,.F.); +#2734 = EDGE_CURVE('',#1039,#1063,#2735,.T.); +#2735 = LINE('',#2736,#2737); +#2736 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#2737 = VECTOR('',#2738,1.); +#2738 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2739 = ORIENTED_EDGE('',*,*,#1046,.T.); +#2740 = ORIENTED_EDGE('',*,*,#1054,.T.); +#2741 = ORIENTED_EDGE('',*,*,#1062,.T.); +#2742 = PLANE('',#2743); +#2743 = AXIS2_PLACEMENT_3D('',#2744,#2745,#2746); +#2744 = CARTESIAN_POINT('',(-0.1,-18.3,0.2)); +#2745 = DIRECTION('',(0.,-0.,-1.)); +#2746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2747 = ADVANCED_FACE('',(#2748),#2789,.T.); +#2748 = FACE_BOUND('',#2749,.T.); +#2749 = EDGE_LOOP('',(#2750,#2758,#2759,#2767,#2775,#2783)); +#2750 = ORIENTED_EDGE('',*,*,#2751,.T.); +#2751 = EDGE_CURVE('',#2752,#1031,#2754,.T.); +#2752 = VERTEX_POINT('',#2753); +#2753 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#2754 = LINE('',#2755,#2756); +#2755 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#2756 = VECTOR('',#2757,1.); +#2757 = DIRECTION('',(0.,0.,1.)); +#2758 = ORIENTED_EDGE('',*,*,#1038,.F.); +#2759 = ORIENTED_EDGE('',*,*,#2760,.T.); +#2760 = EDGE_CURVE('',#1039,#2761,#2763,.T.); +#2761 = VERTEX_POINT('',#2762); +#2762 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#2763 = LINE('',#2764,#2765); +#2764 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#2765 = VECTOR('',#2766,1.); +#2766 = DIRECTION('',(0.,0.,-1.)); +#2767 = ORIENTED_EDGE('',*,*,#2768,.T.); +#2768 = EDGE_CURVE('',#2761,#2769,#2771,.T.); +#2769 = VERTEX_POINT('',#2770); +#2770 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#2771 = LINE('',#2772,#2773); +#2772 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#2773 = VECTOR('',#2774,1.); +#2774 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#2775 = ORIENTED_EDGE('',*,*,#2776,.F.); +#2776 = EDGE_CURVE('',#2777,#2769,#2779,.T.); +#2777 = VERTEX_POINT('',#2778); +#2778 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#2779 = LINE('',#2780,#2781); +#2780 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#2781 = VECTOR('',#2782,1.); +#2782 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2783 = ORIENTED_EDGE('',*,*,#2784,.T.); +#2784 = EDGE_CURVE('',#2777,#2752,#2785,.T.); +#2785 = LINE('',#2786,#2787); +#2786 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#2787 = VECTOR('',#2788,1.); +#2788 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#2789 = PLANE('',#2790); +#2790 = AXIS2_PLACEMENT_3D('',#2791,#2792,#2793); +#2791 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#2792 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2793 = DIRECTION('',(0.,0.,1.)); +#2794 = ADVANCED_FACE('',(#2795),#2806,.T.); +#2795 = FACE_BOUND('',#2796,.T.); +#2796 = EDGE_LOOP('',(#2797,#2798,#2799,#2805)); +#2797 = ORIENTED_EDGE('',*,*,#1086,.F.); +#2798 = ORIENTED_EDGE('',*,*,#1096,.T.); +#2799 = ORIENTED_EDGE('',*,*,#2800,.T.); +#2800 = EDGE_CURVE('',#1097,#1137,#2801,.T.); +#2801 = LINE('',#2802,#2803); +#2802 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#2803 = VECTOR('',#2804,1.); +#2804 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2805 = ORIENTED_EDGE('',*,*,#1144,.T.); +#2806 = PLANE('',#2807); +#2807 = AXIS2_PLACEMENT_3D('',#2808,#2809,#2810); +#2808 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#2809 = DIRECTION('',(0.,-0.,-1.)); +#2810 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2811 = ADVANCED_FACE('',(#2812),#2853,.F.); +#2812 = FACE_BOUND('',#2813,.F.); +#2813 = EDGE_LOOP('',(#2814,#2822,#2823,#2831,#2839,#2847)); +#2814 = ORIENTED_EDGE('',*,*,#2815,.T.); +#2815 = EDGE_CURVE('',#2816,#1137,#2818,.T.); +#2816 = VERTEX_POINT('',#2817); +#2817 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#2818 = LINE('',#2819,#2820); +#2819 = CARTESIAN_POINT('',(0.1,-16.3,-2.1)); +#2820 = VECTOR('',#2821,1.); +#2821 = DIRECTION('',(0.,0.,1.)); +#2822 = ORIENTED_EDGE('',*,*,#1136,.F.); +#2823 = ORIENTED_EDGE('',*,*,#2824,.T.); +#2824 = EDGE_CURVE('',#1129,#2825,#2827,.T.); +#2825 = VERTEX_POINT('',#2826); +#2826 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#2827 = LINE('',#2828,#2829); +#2828 = CARTESIAN_POINT('',(0.1,-15.7,0.2)); +#2829 = VECTOR('',#2830,1.); +#2830 = DIRECTION('',(0.,0.,-1.)); +#2831 = ORIENTED_EDGE('',*,*,#2832,.T.); +#2832 = EDGE_CURVE('',#2825,#2833,#2835,.T.); +#2833 = VERTEX_POINT('',#2834); +#2834 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#2835 = LINE('',#2836,#2837); +#2836 = CARTESIAN_POINT('',(0.1,-15.7,-2.1)); +#2837 = VECTOR('',#2838,1.); +#2838 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#2839 = ORIENTED_EDGE('',*,*,#2840,.T.); +#2840 = EDGE_CURVE('',#2833,#2841,#2843,.T.); +#2841 = VERTEX_POINT('',#2842); +#2842 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#2843 = LINE('',#2844,#2845); +#2844 = CARTESIAN_POINT('',(0.1,-15.85,-2.7)); +#2845 = VECTOR('',#2846,1.); +#2846 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2847 = ORIENTED_EDGE('',*,*,#2848,.T.); +#2848 = EDGE_CURVE('',#2841,#2816,#2849,.T.); +#2849 = LINE('',#2850,#2851); +#2850 = CARTESIAN_POINT('',(0.1,-16.15,-2.7)); +#2851 = VECTOR('',#2852,1.); +#2852 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#2853 = PLANE('',#2854); +#2854 = AXIS2_PLACEMENT_3D('',#2855,#2856,#2857); +#2855 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#2856 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2857 = DIRECTION('',(0.,0.,1.)); +#2858 = ADVANCED_FACE('',(#2859),#2870,.T.); +#2859 = FACE_BOUND('',#2860,.T.); +#2860 = EDGE_LOOP('',(#2861,#2867,#2868,#2869)); +#2861 = ORIENTED_EDGE('',*,*,#2862,.F.); +#2862 = EDGE_CURVE('',#1105,#1129,#2863,.T.); +#2863 = LINE('',#2864,#2865); +#2864 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#2865 = VECTOR('',#2866,1.); +#2866 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2867 = ORIENTED_EDGE('',*,*,#1112,.T.); +#2868 = ORIENTED_EDGE('',*,*,#1120,.T.); +#2869 = ORIENTED_EDGE('',*,*,#1128,.T.); +#2870 = PLANE('',#2871); +#2871 = AXIS2_PLACEMENT_3D('',#2872,#2873,#2874); +#2872 = CARTESIAN_POINT('',(-0.1,-16.3,0.2)); +#2873 = DIRECTION('',(0.,-0.,-1.)); +#2874 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2875 = ADVANCED_FACE('',(#2876),#2917,.T.); +#2876 = FACE_BOUND('',#2877,.T.); +#2877 = EDGE_LOOP('',(#2878,#2886,#2887,#2895,#2903,#2911)); +#2878 = ORIENTED_EDGE('',*,*,#2879,.T.); +#2879 = EDGE_CURVE('',#2880,#1097,#2882,.T.); +#2880 = VERTEX_POINT('',#2881); +#2881 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#2882 = LINE('',#2883,#2884); +#2883 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#2884 = VECTOR('',#2885,1.); +#2885 = DIRECTION('',(0.,0.,1.)); +#2886 = ORIENTED_EDGE('',*,*,#1104,.F.); +#2887 = ORIENTED_EDGE('',*,*,#2888,.T.); +#2888 = EDGE_CURVE('',#1105,#2889,#2891,.T.); +#2889 = VERTEX_POINT('',#2890); +#2890 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#2891 = LINE('',#2892,#2893); +#2892 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#2893 = VECTOR('',#2894,1.); +#2894 = DIRECTION('',(0.,0.,-1.)); +#2895 = ORIENTED_EDGE('',*,*,#2896,.T.); +#2896 = EDGE_CURVE('',#2889,#2897,#2899,.T.); +#2897 = VERTEX_POINT('',#2898); +#2898 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#2899 = LINE('',#2900,#2901); +#2900 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#2901 = VECTOR('',#2902,1.); +#2902 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#2903 = ORIENTED_EDGE('',*,*,#2904,.F.); +#2904 = EDGE_CURVE('',#2905,#2897,#2907,.T.); +#2905 = VERTEX_POINT('',#2906); +#2906 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#2907 = LINE('',#2908,#2909); +#2908 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#2909 = VECTOR('',#2910,1.); +#2910 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#2911 = ORIENTED_EDGE('',*,*,#2912,.T.); +#2912 = EDGE_CURVE('',#2905,#2880,#2913,.T.); +#2913 = LINE('',#2914,#2915); +#2914 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#2915 = VECTOR('',#2916,1.); +#2916 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#2917 = PLANE('',#2918); +#2918 = AXIS2_PLACEMENT_3D('',#2919,#2920,#2921); +#2919 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#2920 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2921 = DIRECTION('',(0.,0.,1.)); +#2922 = ADVANCED_FACE('',(#2923),#2934,.T.); +#2923 = FACE_BOUND('',#2924,.T.); +#2924 = EDGE_LOOP('',(#2925,#2926,#2927,#2933)); +#2925 = ORIENTED_EDGE('',*,*,#1152,.F.); +#2926 = ORIENTED_EDGE('',*,*,#1162,.T.); +#2927 = ORIENTED_EDGE('',*,*,#2928,.T.); +#2928 = EDGE_CURVE('',#1163,#1203,#2929,.T.); +#2929 = LINE('',#2930,#2931); +#2930 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#2931 = VECTOR('',#2932,1.); +#2932 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2933 = ORIENTED_EDGE('',*,*,#1210,.T.); +#2934 = PLANE('',#2935); +#2935 = AXIS2_PLACEMENT_3D('',#2936,#2937,#2938); +#2936 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#2937 = DIRECTION('',(0.,-0.,-1.)); +#2938 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2939 = ADVANCED_FACE('',(#2940),#2981,.F.); +#2940 = FACE_BOUND('',#2941,.F.); +#2941 = EDGE_LOOP('',(#2942,#2950,#2951,#2959,#2967,#2975)); +#2942 = ORIENTED_EDGE('',*,*,#2943,.T.); +#2943 = EDGE_CURVE('',#2944,#1203,#2946,.T.); +#2944 = VERTEX_POINT('',#2945); +#2945 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#2946 = LINE('',#2947,#2948); +#2947 = CARTESIAN_POINT('',(0.1,-14.3,-2.1)); +#2948 = VECTOR('',#2949,1.); +#2949 = DIRECTION('',(0.,0.,1.)); +#2950 = ORIENTED_EDGE('',*,*,#1202,.F.); +#2951 = ORIENTED_EDGE('',*,*,#2952,.T.); +#2952 = EDGE_CURVE('',#1195,#2953,#2955,.T.); +#2953 = VERTEX_POINT('',#2954); +#2954 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#2955 = LINE('',#2956,#2957); +#2956 = CARTESIAN_POINT('',(0.1,-13.7,0.2)); +#2957 = VECTOR('',#2958,1.); +#2958 = DIRECTION('',(0.,0.,-1.)); +#2959 = ORIENTED_EDGE('',*,*,#2960,.T.); +#2960 = EDGE_CURVE('',#2953,#2961,#2963,.T.); +#2961 = VERTEX_POINT('',#2962); +#2962 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#2963 = LINE('',#2964,#2965); +#2964 = CARTESIAN_POINT('',(0.1,-13.7,-2.1)); +#2965 = VECTOR('',#2966,1.); +#2966 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#2967 = ORIENTED_EDGE('',*,*,#2968,.T.); +#2968 = EDGE_CURVE('',#2961,#2969,#2971,.T.); +#2969 = VERTEX_POINT('',#2970); +#2970 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#2971 = LINE('',#2972,#2973); +#2972 = CARTESIAN_POINT('',(0.1,-13.85,-2.7)); +#2973 = VECTOR('',#2974,1.); +#2974 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#2975 = ORIENTED_EDGE('',*,*,#2976,.T.); +#2976 = EDGE_CURVE('',#2969,#2944,#2977,.T.); +#2977 = LINE('',#2978,#2979); +#2978 = CARTESIAN_POINT('',(0.1,-14.15,-2.7)); +#2979 = VECTOR('',#2980,1.); +#2980 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#2981 = PLANE('',#2982); +#2982 = AXIS2_PLACEMENT_3D('',#2983,#2984,#2985); +#2983 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#2984 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#2985 = DIRECTION('',(0.,0.,1.)); +#2986 = ADVANCED_FACE('',(#2987),#2998,.T.); +#2987 = FACE_BOUND('',#2988,.T.); +#2988 = EDGE_LOOP('',(#2989,#2995,#2996,#2997)); +#2989 = ORIENTED_EDGE('',*,*,#2990,.F.); +#2990 = EDGE_CURVE('',#1171,#1195,#2991,.T.); +#2991 = LINE('',#2992,#2993); +#2992 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#2993 = VECTOR('',#2994,1.); +#2994 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#2995 = ORIENTED_EDGE('',*,*,#1178,.T.); +#2996 = ORIENTED_EDGE('',*,*,#1186,.T.); +#2997 = ORIENTED_EDGE('',*,*,#1194,.T.); +#2998 = PLANE('',#2999); +#2999 = AXIS2_PLACEMENT_3D('',#3000,#3001,#3002); +#3000 = CARTESIAN_POINT('',(-0.1,-14.3,0.2)); +#3001 = DIRECTION('',(0.,-0.,-1.)); +#3002 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3003 = ADVANCED_FACE('',(#3004),#3045,.T.); +#3004 = FACE_BOUND('',#3005,.T.); +#3005 = EDGE_LOOP('',(#3006,#3014,#3015,#3023,#3031,#3039)); +#3006 = ORIENTED_EDGE('',*,*,#3007,.T.); +#3007 = EDGE_CURVE('',#3008,#1163,#3010,.T.); +#3008 = VERTEX_POINT('',#3009); +#3009 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#3010 = LINE('',#3011,#3012); +#3011 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#3012 = VECTOR('',#3013,1.); +#3013 = DIRECTION('',(0.,0.,1.)); +#3014 = ORIENTED_EDGE('',*,*,#1170,.F.); +#3015 = ORIENTED_EDGE('',*,*,#3016,.T.); +#3016 = EDGE_CURVE('',#1171,#3017,#3019,.T.); +#3017 = VERTEX_POINT('',#3018); +#3018 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#3019 = LINE('',#3020,#3021); +#3020 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#3021 = VECTOR('',#3022,1.); +#3022 = DIRECTION('',(0.,0.,-1.)); +#3023 = ORIENTED_EDGE('',*,*,#3024,.T.); +#3024 = EDGE_CURVE('',#3017,#3025,#3027,.T.); +#3025 = VERTEX_POINT('',#3026); +#3026 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#3027 = LINE('',#3028,#3029); +#3028 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#3029 = VECTOR('',#3030,1.); +#3030 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3031 = ORIENTED_EDGE('',*,*,#3032,.F.); +#3032 = EDGE_CURVE('',#3033,#3025,#3035,.T.); +#3033 = VERTEX_POINT('',#3034); +#3034 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#3035 = LINE('',#3036,#3037); +#3036 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#3037 = VECTOR('',#3038,1.); +#3038 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3039 = ORIENTED_EDGE('',*,*,#3040,.T.); +#3040 = EDGE_CURVE('',#3033,#3008,#3041,.T.); +#3041 = LINE('',#3042,#3043); +#3042 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#3043 = VECTOR('',#3044,1.); +#3044 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3045 = PLANE('',#3046); +#3046 = AXIS2_PLACEMENT_3D('',#3047,#3048,#3049); +#3047 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#3048 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3049 = DIRECTION('',(0.,0.,1.)); +#3050 = ADVANCED_FACE('',(#3051),#3062,.T.); +#3051 = FACE_BOUND('',#3052,.T.); +#3052 = EDGE_LOOP('',(#3053,#3054,#3055,#3061)); +#3053 = ORIENTED_EDGE('',*,*,#1218,.F.); +#3054 = ORIENTED_EDGE('',*,*,#1228,.T.); +#3055 = ORIENTED_EDGE('',*,*,#3056,.T.); +#3056 = EDGE_CURVE('',#1229,#1269,#3057,.T.); +#3057 = LINE('',#3058,#3059); +#3058 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#3059 = VECTOR('',#3060,1.); +#3060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3061 = ORIENTED_EDGE('',*,*,#1276,.T.); +#3062 = PLANE('',#3063); +#3063 = AXIS2_PLACEMENT_3D('',#3064,#3065,#3066); +#3064 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#3065 = DIRECTION('',(0.,-0.,-1.)); +#3066 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3067 = ADVANCED_FACE('',(#3068),#3109,.F.); +#3068 = FACE_BOUND('',#3069,.F.); +#3069 = EDGE_LOOP('',(#3070,#3078,#3079,#3087,#3095,#3103)); +#3070 = ORIENTED_EDGE('',*,*,#3071,.T.); +#3071 = EDGE_CURVE('',#3072,#1269,#3074,.T.); +#3072 = VERTEX_POINT('',#3073); +#3073 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#3074 = LINE('',#3075,#3076); +#3075 = CARTESIAN_POINT('',(0.1,-12.3,-2.1)); +#3076 = VECTOR('',#3077,1.); +#3077 = DIRECTION('',(0.,0.,1.)); +#3078 = ORIENTED_EDGE('',*,*,#1268,.F.); +#3079 = ORIENTED_EDGE('',*,*,#3080,.T.); +#3080 = EDGE_CURVE('',#1261,#3081,#3083,.T.); +#3081 = VERTEX_POINT('',#3082); +#3082 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#3083 = LINE('',#3084,#3085); +#3084 = CARTESIAN_POINT('',(0.1,-11.7,0.2)); +#3085 = VECTOR('',#3086,1.); +#3086 = DIRECTION('',(0.,0.,-1.)); +#3087 = ORIENTED_EDGE('',*,*,#3088,.T.); +#3088 = EDGE_CURVE('',#3081,#3089,#3091,.T.); +#3089 = VERTEX_POINT('',#3090); +#3090 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#3091 = LINE('',#3092,#3093); +#3092 = CARTESIAN_POINT('',(0.1,-11.7,-2.1)); +#3093 = VECTOR('',#3094,1.); +#3094 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3095 = ORIENTED_EDGE('',*,*,#3096,.T.); +#3096 = EDGE_CURVE('',#3089,#3097,#3099,.T.); +#3097 = VERTEX_POINT('',#3098); +#3098 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#3099 = LINE('',#3100,#3101); +#3100 = CARTESIAN_POINT('',(0.1,-11.85,-2.7)); +#3101 = VECTOR('',#3102,1.); +#3102 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3103 = ORIENTED_EDGE('',*,*,#3104,.T.); +#3104 = EDGE_CURVE('',#3097,#3072,#3105,.T.); +#3105 = LINE('',#3106,#3107); +#3106 = CARTESIAN_POINT('',(0.1,-12.15,-2.7)); +#3107 = VECTOR('',#3108,1.); +#3108 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3109 = PLANE('',#3110); +#3110 = AXIS2_PLACEMENT_3D('',#3111,#3112,#3113); +#3111 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#3112 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3113 = DIRECTION('',(0.,0.,1.)); +#3114 = ADVANCED_FACE('',(#3115),#3126,.T.); +#3115 = FACE_BOUND('',#3116,.T.); +#3116 = EDGE_LOOP('',(#3117,#3123,#3124,#3125)); +#3117 = ORIENTED_EDGE('',*,*,#3118,.F.); +#3118 = EDGE_CURVE('',#1237,#1261,#3119,.T.); +#3119 = LINE('',#3120,#3121); +#3120 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#3121 = VECTOR('',#3122,1.); +#3122 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3123 = ORIENTED_EDGE('',*,*,#1244,.T.); +#3124 = ORIENTED_EDGE('',*,*,#1252,.T.); +#3125 = ORIENTED_EDGE('',*,*,#1260,.T.); +#3126 = PLANE('',#3127); +#3127 = AXIS2_PLACEMENT_3D('',#3128,#3129,#3130); +#3128 = CARTESIAN_POINT('',(-0.1,-12.3,0.2)); +#3129 = DIRECTION('',(0.,-0.,-1.)); +#3130 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3131 = ADVANCED_FACE('',(#3132),#3173,.T.); +#3132 = FACE_BOUND('',#3133,.T.); +#3133 = EDGE_LOOP('',(#3134,#3142,#3143,#3151,#3159,#3167)); +#3134 = ORIENTED_EDGE('',*,*,#3135,.T.); +#3135 = EDGE_CURVE('',#3136,#1229,#3138,.T.); +#3136 = VERTEX_POINT('',#3137); +#3137 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#3138 = LINE('',#3139,#3140); +#3139 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#3140 = VECTOR('',#3141,1.); +#3141 = DIRECTION('',(0.,0.,1.)); +#3142 = ORIENTED_EDGE('',*,*,#1236,.F.); +#3143 = ORIENTED_EDGE('',*,*,#3144,.T.); +#3144 = EDGE_CURVE('',#1237,#3145,#3147,.T.); +#3145 = VERTEX_POINT('',#3146); +#3146 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#3147 = LINE('',#3148,#3149); +#3148 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#3149 = VECTOR('',#3150,1.); +#3150 = DIRECTION('',(0.,0.,-1.)); +#3151 = ORIENTED_EDGE('',*,*,#3152,.T.); +#3152 = EDGE_CURVE('',#3145,#3153,#3155,.T.); +#3153 = VERTEX_POINT('',#3154); +#3154 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#3155 = LINE('',#3156,#3157); +#3156 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#3157 = VECTOR('',#3158,1.); +#3158 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3159 = ORIENTED_EDGE('',*,*,#3160,.F.); +#3160 = EDGE_CURVE('',#3161,#3153,#3163,.T.); +#3161 = VERTEX_POINT('',#3162); +#3162 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#3163 = LINE('',#3164,#3165); +#3164 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#3165 = VECTOR('',#3166,1.); +#3166 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3167 = ORIENTED_EDGE('',*,*,#3168,.T.); +#3168 = EDGE_CURVE('',#3161,#3136,#3169,.T.); +#3169 = LINE('',#3170,#3171); +#3170 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#3171 = VECTOR('',#3172,1.); +#3172 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3173 = PLANE('',#3174); +#3174 = AXIS2_PLACEMENT_3D('',#3175,#3176,#3177); +#3175 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#3176 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3177 = DIRECTION('',(0.,0.,1.)); +#3178 = ADVANCED_FACE('',(#3179),#3190,.T.); +#3179 = FACE_BOUND('',#3180,.T.); +#3180 = EDGE_LOOP('',(#3181,#3182,#3183,#3189)); +#3181 = ORIENTED_EDGE('',*,*,#1284,.F.); +#3182 = ORIENTED_EDGE('',*,*,#1294,.T.); +#3183 = ORIENTED_EDGE('',*,*,#3184,.T.); +#3184 = EDGE_CURVE('',#1295,#1335,#3185,.T.); +#3185 = LINE('',#3186,#3187); +#3186 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#3187 = VECTOR('',#3188,1.); +#3188 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3189 = ORIENTED_EDGE('',*,*,#1342,.T.); +#3190 = PLANE('',#3191); +#3191 = AXIS2_PLACEMENT_3D('',#3192,#3193,#3194); +#3192 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#3193 = DIRECTION('',(0.,-0.,-1.)); +#3194 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3195 = ADVANCED_FACE('',(#3196),#3237,.F.); +#3196 = FACE_BOUND('',#3197,.F.); +#3197 = EDGE_LOOP('',(#3198,#3206,#3207,#3215,#3223,#3231)); +#3198 = ORIENTED_EDGE('',*,*,#3199,.T.); +#3199 = EDGE_CURVE('',#3200,#1335,#3202,.T.); +#3200 = VERTEX_POINT('',#3201); +#3201 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#3202 = LINE('',#3203,#3204); +#3203 = CARTESIAN_POINT('',(0.1,-10.3,-2.1)); +#3204 = VECTOR('',#3205,1.); +#3205 = DIRECTION('',(0.,0.,1.)); +#3206 = ORIENTED_EDGE('',*,*,#1334,.F.); +#3207 = ORIENTED_EDGE('',*,*,#3208,.T.); +#3208 = EDGE_CURVE('',#1327,#3209,#3211,.T.); +#3209 = VERTEX_POINT('',#3210); +#3210 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#3211 = LINE('',#3212,#3213); +#3212 = CARTESIAN_POINT('',(0.1,-9.7,0.2)); +#3213 = VECTOR('',#3214,1.); +#3214 = DIRECTION('',(0.,0.,-1.)); +#3215 = ORIENTED_EDGE('',*,*,#3216,.T.); +#3216 = EDGE_CURVE('',#3209,#3217,#3219,.T.); +#3217 = VERTEX_POINT('',#3218); +#3218 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#3219 = LINE('',#3220,#3221); +#3220 = CARTESIAN_POINT('',(0.1,-9.7,-2.1)); +#3221 = VECTOR('',#3222,1.); +#3222 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3223 = ORIENTED_EDGE('',*,*,#3224,.T.); +#3224 = EDGE_CURVE('',#3217,#3225,#3227,.T.); +#3225 = VERTEX_POINT('',#3226); +#3226 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#3227 = LINE('',#3228,#3229); +#3228 = CARTESIAN_POINT('',(0.1,-9.85,-2.7)); +#3229 = VECTOR('',#3230,1.); +#3230 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3231 = ORIENTED_EDGE('',*,*,#3232,.T.); +#3232 = EDGE_CURVE('',#3225,#3200,#3233,.T.); +#3233 = LINE('',#3234,#3235); +#3234 = CARTESIAN_POINT('',(0.1,-10.15,-2.7)); +#3235 = VECTOR('',#3236,1.); +#3236 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3237 = PLANE('',#3238); +#3238 = AXIS2_PLACEMENT_3D('',#3239,#3240,#3241); +#3239 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#3240 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3241 = DIRECTION('',(0.,0.,1.)); +#3242 = ADVANCED_FACE('',(#3243),#3254,.T.); +#3243 = FACE_BOUND('',#3244,.T.); +#3244 = EDGE_LOOP('',(#3245,#3251,#3252,#3253)); +#3245 = ORIENTED_EDGE('',*,*,#3246,.F.); +#3246 = EDGE_CURVE('',#1303,#1327,#3247,.T.); +#3247 = LINE('',#3248,#3249); +#3248 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#3249 = VECTOR('',#3250,1.); +#3250 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3251 = ORIENTED_EDGE('',*,*,#1310,.T.); +#3252 = ORIENTED_EDGE('',*,*,#1318,.T.); +#3253 = ORIENTED_EDGE('',*,*,#1326,.T.); +#3254 = PLANE('',#3255); +#3255 = AXIS2_PLACEMENT_3D('',#3256,#3257,#3258); +#3256 = CARTESIAN_POINT('',(-0.1,-10.3,0.2)); +#3257 = DIRECTION('',(0.,-0.,-1.)); +#3258 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3259 = ADVANCED_FACE('',(#3260),#3301,.T.); +#3260 = FACE_BOUND('',#3261,.T.); +#3261 = EDGE_LOOP('',(#3262,#3270,#3271,#3279,#3287,#3295)); +#3262 = ORIENTED_EDGE('',*,*,#3263,.T.); +#3263 = EDGE_CURVE('',#3264,#1295,#3266,.T.); +#3264 = VERTEX_POINT('',#3265); +#3265 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#3266 = LINE('',#3267,#3268); +#3267 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#3268 = VECTOR('',#3269,1.); +#3269 = DIRECTION('',(0.,0.,1.)); +#3270 = ORIENTED_EDGE('',*,*,#1302,.F.); +#3271 = ORIENTED_EDGE('',*,*,#3272,.T.); +#3272 = EDGE_CURVE('',#1303,#3273,#3275,.T.); +#3273 = VERTEX_POINT('',#3274); +#3274 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#3275 = LINE('',#3276,#3277); +#3276 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#3277 = VECTOR('',#3278,1.); +#3278 = DIRECTION('',(0.,0.,-1.)); +#3279 = ORIENTED_EDGE('',*,*,#3280,.T.); +#3280 = EDGE_CURVE('',#3273,#3281,#3283,.T.); +#3281 = VERTEX_POINT('',#3282); +#3282 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#3283 = LINE('',#3284,#3285); +#3284 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#3285 = VECTOR('',#3286,1.); +#3286 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3287 = ORIENTED_EDGE('',*,*,#3288,.F.); +#3288 = EDGE_CURVE('',#3289,#3281,#3291,.T.); +#3289 = VERTEX_POINT('',#3290); +#3290 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#3291 = LINE('',#3292,#3293); +#3292 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#3293 = VECTOR('',#3294,1.); +#3294 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3295 = ORIENTED_EDGE('',*,*,#3296,.T.); +#3296 = EDGE_CURVE('',#3289,#3264,#3297,.T.); +#3297 = LINE('',#3298,#3299); +#3298 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#3299 = VECTOR('',#3300,1.); +#3300 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3301 = PLANE('',#3302); +#3302 = AXIS2_PLACEMENT_3D('',#3303,#3304,#3305); +#3303 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#3304 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3305 = DIRECTION('',(0.,0.,1.)); +#3306 = ADVANCED_FACE('',(#3307),#3318,.T.); +#3307 = FACE_BOUND('',#3308,.T.); +#3308 = EDGE_LOOP('',(#3309,#3310,#3311,#3317)); +#3309 = ORIENTED_EDGE('',*,*,#1350,.F.); +#3310 = ORIENTED_EDGE('',*,*,#1360,.T.); +#3311 = ORIENTED_EDGE('',*,*,#3312,.T.); +#3312 = EDGE_CURVE('',#1361,#1401,#3313,.T.); +#3313 = LINE('',#3314,#3315); +#3314 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#3315 = VECTOR('',#3316,1.); +#3316 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3317 = ORIENTED_EDGE('',*,*,#1408,.T.); +#3318 = PLANE('',#3319); +#3319 = AXIS2_PLACEMENT_3D('',#3320,#3321,#3322); +#3320 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#3321 = DIRECTION('',(0.,-0.,-1.)); +#3322 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3323 = ADVANCED_FACE('',(#3324),#3365,.F.); +#3324 = FACE_BOUND('',#3325,.F.); +#3325 = EDGE_LOOP('',(#3326,#3334,#3335,#3343,#3351,#3359)); +#3326 = ORIENTED_EDGE('',*,*,#3327,.T.); +#3327 = EDGE_CURVE('',#3328,#1401,#3330,.T.); +#3328 = VERTEX_POINT('',#3329); +#3329 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#3330 = LINE('',#3331,#3332); +#3331 = CARTESIAN_POINT('',(0.1,-8.3,-2.1)); +#3332 = VECTOR('',#3333,1.); +#3333 = DIRECTION('',(0.,0.,1.)); +#3334 = ORIENTED_EDGE('',*,*,#1400,.F.); +#3335 = ORIENTED_EDGE('',*,*,#3336,.T.); +#3336 = EDGE_CURVE('',#1393,#3337,#3339,.T.); +#3337 = VERTEX_POINT('',#3338); +#3338 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#3339 = LINE('',#3340,#3341); +#3340 = CARTESIAN_POINT('',(0.1,-7.7,0.2)); +#3341 = VECTOR('',#3342,1.); +#3342 = DIRECTION('',(0.,0.,-1.)); +#3343 = ORIENTED_EDGE('',*,*,#3344,.T.); +#3344 = EDGE_CURVE('',#3337,#3345,#3347,.T.); +#3345 = VERTEX_POINT('',#3346); +#3346 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#3347 = LINE('',#3348,#3349); +#3348 = CARTESIAN_POINT('',(0.1,-7.7,-2.1)); +#3349 = VECTOR('',#3350,1.); +#3350 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3351 = ORIENTED_EDGE('',*,*,#3352,.T.); +#3352 = EDGE_CURVE('',#3345,#3353,#3355,.T.); +#3353 = VERTEX_POINT('',#3354); +#3354 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#3355 = LINE('',#3356,#3357); +#3356 = CARTESIAN_POINT('',(0.1,-7.85,-2.7)); +#3357 = VECTOR('',#3358,1.); +#3358 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3359 = ORIENTED_EDGE('',*,*,#3360,.T.); +#3360 = EDGE_CURVE('',#3353,#3328,#3361,.T.); +#3361 = LINE('',#3362,#3363); +#3362 = CARTESIAN_POINT('',(0.1,-8.15,-2.7)); +#3363 = VECTOR('',#3364,1.); +#3364 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3365 = PLANE('',#3366); +#3366 = AXIS2_PLACEMENT_3D('',#3367,#3368,#3369); +#3367 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#3368 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3369 = DIRECTION('',(0.,0.,1.)); +#3370 = ADVANCED_FACE('',(#3371),#3382,.T.); +#3371 = FACE_BOUND('',#3372,.T.); +#3372 = EDGE_LOOP('',(#3373,#3379,#3380,#3381)); +#3373 = ORIENTED_EDGE('',*,*,#3374,.F.); +#3374 = EDGE_CURVE('',#1369,#1393,#3375,.T.); +#3375 = LINE('',#3376,#3377); +#3376 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#3377 = VECTOR('',#3378,1.); +#3378 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3379 = ORIENTED_EDGE('',*,*,#1376,.T.); +#3380 = ORIENTED_EDGE('',*,*,#1384,.T.); +#3381 = ORIENTED_EDGE('',*,*,#1392,.T.); +#3382 = PLANE('',#3383); +#3383 = AXIS2_PLACEMENT_3D('',#3384,#3385,#3386); +#3384 = CARTESIAN_POINT('',(-0.1,-8.3,0.2)); +#3385 = DIRECTION('',(0.,-0.,-1.)); +#3386 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3387 = ADVANCED_FACE('',(#3388),#3429,.T.); +#3388 = FACE_BOUND('',#3389,.T.); +#3389 = EDGE_LOOP('',(#3390,#3398,#3399,#3407,#3415,#3423)); +#3390 = ORIENTED_EDGE('',*,*,#3391,.T.); +#3391 = EDGE_CURVE('',#3392,#1361,#3394,.T.); +#3392 = VERTEX_POINT('',#3393); +#3393 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#3394 = LINE('',#3395,#3396); +#3395 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#3396 = VECTOR('',#3397,1.); +#3397 = DIRECTION('',(0.,0.,1.)); +#3398 = ORIENTED_EDGE('',*,*,#1368,.F.); +#3399 = ORIENTED_EDGE('',*,*,#3400,.T.); +#3400 = EDGE_CURVE('',#1369,#3401,#3403,.T.); +#3401 = VERTEX_POINT('',#3402); +#3402 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#3403 = LINE('',#3404,#3405); +#3404 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#3405 = VECTOR('',#3406,1.); +#3406 = DIRECTION('',(0.,0.,-1.)); +#3407 = ORIENTED_EDGE('',*,*,#3408,.T.); +#3408 = EDGE_CURVE('',#3401,#3409,#3411,.T.); +#3409 = VERTEX_POINT('',#3410); +#3410 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#3411 = LINE('',#3412,#3413); +#3412 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#3413 = VECTOR('',#3414,1.); +#3414 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3415 = ORIENTED_EDGE('',*,*,#3416,.F.); +#3416 = EDGE_CURVE('',#3417,#3409,#3419,.T.); +#3417 = VERTEX_POINT('',#3418); +#3418 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#3419 = LINE('',#3420,#3421); +#3420 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#3421 = VECTOR('',#3422,1.); +#3422 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3423 = ORIENTED_EDGE('',*,*,#3424,.T.); +#3424 = EDGE_CURVE('',#3417,#3392,#3425,.T.); +#3425 = LINE('',#3426,#3427); +#3426 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#3427 = VECTOR('',#3428,1.); +#3428 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3429 = PLANE('',#3430); +#3430 = AXIS2_PLACEMENT_3D('',#3431,#3432,#3433); +#3431 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#3432 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3433 = DIRECTION('',(0.,0.,1.)); +#3434 = ADVANCED_FACE('',(#3435),#3446,.T.); +#3435 = FACE_BOUND('',#3436,.T.); +#3436 = EDGE_LOOP('',(#3437,#3438,#3439,#3445)); +#3437 = ORIENTED_EDGE('',*,*,#1416,.F.); +#3438 = ORIENTED_EDGE('',*,*,#1426,.T.); +#3439 = ORIENTED_EDGE('',*,*,#3440,.T.); +#3440 = EDGE_CURVE('',#1427,#1467,#3441,.T.); +#3441 = LINE('',#3442,#3443); +#3442 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#3443 = VECTOR('',#3444,1.); +#3444 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3445 = ORIENTED_EDGE('',*,*,#1474,.T.); +#3446 = PLANE('',#3447); +#3447 = AXIS2_PLACEMENT_3D('',#3448,#3449,#3450); +#3448 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#3449 = DIRECTION('',(0.,-0.,-1.)); +#3450 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3451 = ADVANCED_FACE('',(#3452),#3493,.F.); +#3452 = FACE_BOUND('',#3453,.F.); +#3453 = EDGE_LOOP('',(#3454,#3462,#3463,#3471,#3479,#3487)); +#3454 = ORIENTED_EDGE('',*,*,#3455,.T.); +#3455 = EDGE_CURVE('',#3456,#1467,#3458,.T.); +#3456 = VERTEX_POINT('',#3457); +#3457 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#3458 = LINE('',#3459,#3460); +#3459 = CARTESIAN_POINT('',(0.1,-6.3,-2.1)); +#3460 = VECTOR('',#3461,1.); +#3461 = DIRECTION('',(0.,0.,1.)); +#3462 = ORIENTED_EDGE('',*,*,#1466,.F.); +#3463 = ORIENTED_EDGE('',*,*,#3464,.T.); +#3464 = EDGE_CURVE('',#1459,#3465,#3467,.T.); +#3465 = VERTEX_POINT('',#3466); +#3466 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#3467 = LINE('',#3468,#3469); +#3468 = CARTESIAN_POINT('',(0.1,-5.7,0.2)); +#3469 = VECTOR('',#3470,1.); +#3470 = DIRECTION('',(0.,0.,-1.)); +#3471 = ORIENTED_EDGE('',*,*,#3472,.T.); +#3472 = EDGE_CURVE('',#3465,#3473,#3475,.T.); +#3473 = VERTEX_POINT('',#3474); +#3474 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#3475 = LINE('',#3476,#3477); +#3476 = CARTESIAN_POINT('',(0.1,-5.7,-2.1)); +#3477 = VECTOR('',#3478,1.); +#3478 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3479 = ORIENTED_EDGE('',*,*,#3480,.T.); +#3480 = EDGE_CURVE('',#3473,#3481,#3483,.T.); +#3481 = VERTEX_POINT('',#3482); +#3482 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#3483 = LINE('',#3484,#3485); +#3484 = CARTESIAN_POINT('',(0.1,-5.85,-2.7)); +#3485 = VECTOR('',#3486,1.); +#3486 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3487 = ORIENTED_EDGE('',*,*,#3488,.T.); +#3488 = EDGE_CURVE('',#3481,#3456,#3489,.T.); +#3489 = LINE('',#3490,#3491); +#3490 = CARTESIAN_POINT('',(0.1,-6.15,-2.7)); +#3491 = VECTOR('',#3492,1.); +#3492 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3493 = PLANE('',#3494); +#3494 = AXIS2_PLACEMENT_3D('',#3495,#3496,#3497); +#3495 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#3496 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3497 = DIRECTION('',(0.,0.,1.)); +#3498 = ADVANCED_FACE('',(#3499),#3510,.T.); +#3499 = FACE_BOUND('',#3500,.T.); +#3500 = EDGE_LOOP('',(#3501,#3507,#3508,#3509)); +#3501 = ORIENTED_EDGE('',*,*,#3502,.F.); +#3502 = EDGE_CURVE('',#1435,#1459,#3503,.T.); +#3503 = LINE('',#3504,#3505); +#3504 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#3505 = VECTOR('',#3506,1.); +#3506 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3507 = ORIENTED_EDGE('',*,*,#1442,.T.); +#3508 = ORIENTED_EDGE('',*,*,#1450,.T.); +#3509 = ORIENTED_EDGE('',*,*,#1458,.T.); +#3510 = PLANE('',#3511); +#3511 = AXIS2_PLACEMENT_3D('',#3512,#3513,#3514); +#3512 = CARTESIAN_POINT('',(-0.1,-6.3,0.2)); +#3513 = DIRECTION('',(0.,-0.,-1.)); +#3514 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3515 = ADVANCED_FACE('',(#3516),#3557,.T.); +#3516 = FACE_BOUND('',#3517,.T.); +#3517 = EDGE_LOOP('',(#3518,#3526,#3527,#3535,#3543,#3551)); +#3518 = ORIENTED_EDGE('',*,*,#3519,.T.); +#3519 = EDGE_CURVE('',#3520,#1427,#3522,.T.); +#3520 = VERTEX_POINT('',#3521); +#3521 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#3522 = LINE('',#3523,#3524); +#3523 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#3524 = VECTOR('',#3525,1.); +#3525 = DIRECTION('',(0.,0.,1.)); +#3526 = ORIENTED_EDGE('',*,*,#1434,.F.); +#3527 = ORIENTED_EDGE('',*,*,#3528,.T.); +#3528 = EDGE_CURVE('',#1435,#3529,#3531,.T.); +#3529 = VERTEX_POINT('',#3530); +#3530 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#3531 = LINE('',#3532,#3533); +#3532 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#3533 = VECTOR('',#3534,1.); +#3534 = DIRECTION('',(0.,0.,-1.)); +#3535 = ORIENTED_EDGE('',*,*,#3536,.T.); +#3536 = EDGE_CURVE('',#3529,#3537,#3539,.T.); +#3537 = VERTEX_POINT('',#3538); +#3538 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#3539 = LINE('',#3540,#3541); +#3540 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#3541 = VECTOR('',#3542,1.); +#3542 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3543 = ORIENTED_EDGE('',*,*,#3544,.F.); +#3544 = EDGE_CURVE('',#3545,#3537,#3547,.T.); +#3545 = VERTEX_POINT('',#3546); +#3546 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#3547 = LINE('',#3548,#3549); +#3548 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#3549 = VECTOR('',#3550,1.); +#3550 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3551 = ORIENTED_EDGE('',*,*,#3552,.T.); +#3552 = EDGE_CURVE('',#3545,#3520,#3553,.T.); +#3553 = LINE('',#3554,#3555); +#3554 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#3555 = VECTOR('',#3556,1.); +#3556 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3557 = PLANE('',#3558); +#3558 = AXIS2_PLACEMENT_3D('',#3559,#3560,#3561); +#3559 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#3560 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3561 = DIRECTION('',(0.,0.,1.)); +#3562 = ADVANCED_FACE('',(#3563),#3574,.T.); +#3563 = FACE_BOUND('',#3564,.T.); +#3564 = EDGE_LOOP('',(#3565,#3566,#3567,#3573)); +#3565 = ORIENTED_EDGE('',*,*,#1482,.F.); +#3566 = ORIENTED_EDGE('',*,*,#1492,.T.); +#3567 = ORIENTED_EDGE('',*,*,#3568,.T.); +#3568 = EDGE_CURVE('',#1493,#1533,#3569,.T.); +#3569 = LINE('',#3570,#3571); +#3570 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#3571 = VECTOR('',#3572,1.); +#3572 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3573 = ORIENTED_EDGE('',*,*,#1540,.T.); +#3574 = PLANE('',#3575); +#3575 = AXIS2_PLACEMENT_3D('',#3576,#3577,#3578); +#3576 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#3577 = DIRECTION('',(0.,-0.,-1.)); +#3578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3579 = ADVANCED_FACE('',(#3580),#3621,.F.); +#3580 = FACE_BOUND('',#3581,.F.); +#3581 = EDGE_LOOP('',(#3582,#3590,#3591,#3599,#3607,#3615)); +#3582 = ORIENTED_EDGE('',*,*,#3583,.T.); +#3583 = EDGE_CURVE('',#3584,#1533,#3586,.T.); +#3584 = VERTEX_POINT('',#3585); +#3585 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#3586 = LINE('',#3587,#3588); +#3587 = CARTESIAN_POINT('',(0.1,-4.3,-2.1)); +#3588 = VECTOR('',#3589,1.); +#3589 = DIRECTION('',(0.,0.,1.)); +#3590 = ORIENTED_EDGE('',*,*,#1532,.F.); +#3591 = ORIENTED_EDGE('',*,*,#3592,.T.); +#3592 = EDGE_CURVE('',#1525,#3593,#3595,.T.); +#3593 = VERTEX_POINT('',#3594); +#3594 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#3595 = LINE('',#3596,#3597); +#3596 = CARTESIAN_POINT('',(0.1,-3.7,0.2)); +#3597 = VECTOR('',#3598,1.); +#3598 = DIRECTION('',(0.,0.,-1.)); +#3599 = ORIENTED_EDGE('',*,*,#3600,.T.); +#3600 = EDGE_CURVE('',#3593,#3601,#3603,.T.); +#3601 = VERTEX_POINT('',#3602); +#3602 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#3603 = LINE('',#3604,#3605); +#3604 = CARTESIAN_POINT('',(0.1,-3.7,-2.1)); +#3605 = VECTOR('',#3606,1.); +#3606 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3607 = ORIENTED_EDGE('',*,*,#3608,.T.); +#3608 = EDGE_CURVE('',#3601,#3609,#3611,.T.); +#3609 = VERTEX_POINT('',#3610); +#3610 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#3611 = LINE('',#3612,#3613); +#3612 = CARTESIAN_POINT('',(0.1,-3.85,-2.7)); +#3613 = VECTOR('',#3614,1.); +#3614 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3615 = ORIENTED_EDGE('',*,*,#3616,.T.); +#3616 = EDGE_CURVE('',#3609,#3584,#3617,.T.); +#3617 = LINE('',#3618,#3619); +#3618 = CARTESIAN_POINT('',(0.1,-4.15,-2.7)); +#3619 = VECTOR('',#3620,1.); +#3620 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3621 = PLANE('',#3622); +#3622 = AXIS2_PLACEMENT_3D('',#3623,#3624,#3625); +#3623 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#3624 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3625 = DIRECTION('',(0.,0.,1.)); +#3626 = ADVANCED_FACE('',(#3627),#3638,.T.); +#3627 = FACE_BOUND('',#3628,.T.); +#3628 = EDGE_LOOP('',(#3629,#3635,#3636,#3637)); +#3629 = ORIENTED_EDGE('',*,*,#3630,.F.); +#3630 = EDGE_CURVE('',#1501,#1525,#3631,.T.); +#3631 = LINE('',#3632,#3633); +#3632 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#3633 = VECTOR('',#3634,1.); +#3634 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3635 = ORIENTED_EDGE('',*,*,#1508,.T.); +#3636 = ORIENTED_EDGE('',*,*,#1516,.T.); +#3637 = ORIENTED_EDGE('',*,*,#1524,.T.); +#3638 = PLANE('',#3639); +#3639 = AXIS2_PLACEMENT_3D('',#3640,#3641,#3642); +#3640 = CARTESIAN_POINT('',(-0.1,-4.3,0.2)); +#3641 = DIRECTION('',(0.,-0.,-1.)); +#3642 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3643 = ADVANCED_FACE('',(#3644),#3685,.T.); +#3644 = FACE_BOUND('',#3645,.T.); +#3645 = EDGE_LOOP('',(#3646,#3654,#3655,#3663,#3671,#3679)); +#3646 = ORIENTED_EDGE('',*,*,#3647,.T.); +#3647 = EDGE_CURVE('',#3648,#1493,#3650,.T.); +#3648 = VERTEX_POINT('',#3649); +#3649 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#3650 = LINE('',#3651,#3652); +#3651 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#3652 = VECTOR('',#3653,1.); +#3653 = DIRECTION('',(0.,0.,1.)); +#3654 = ORIENTED_EDGE('',*,*,#1500,.F.); +#3655 = ORIENTED_EDGE('',*,*,#3656,.T.); +#3656 = EDGE_CURVE('',#1501,#3657,#3659,.T.); +#3657 = VERTEX_POINT('',#3658); +#3658 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#3659 = LINE('',#3660,#3661); +#3660 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#3661 = VECTOR('',#3662,1.); +#3662 = DIRECTION('',(0.,0.,-1.)); +#3663 = ORIENTED_EDGE('',*,*,#3664,.T.); +#3664 = EDGE_CURVE('',#3657,#3665,#3667,.T.); +#3665 = VERTEX_POINT('',#3666); +#3666 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#3667 = LINE('',#3668,#3669); +#3668 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#3669 = VECTOR('',#3670,1.); +#3670 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3671 = ORIENTED_EDGE('',*,*,#3672,.F.); +#3672 = EDGE_CURVE('',#3673,#3665,#3675,.T.); +#3673 = VERTEX_POINT('',#3674); +#3674 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#3675 = LINE('',#3676,#3677); +#3676 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#3677 = VECTOR('',#3678,1.); +#3678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3679 = ORIENTED_EDGE('',*,*,#3680,.T.); +#3680 = EDGE_CURVE('',#3673,#3648,#3681,.T.); +#3681 = LINE('',#3682,#3683); +#3682 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#3683 = VECTOR('',#3684,1.); +#3684 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3685 = PLANE('',#3686); +#3686 = AXIS2_PLACEMENT_3D('',#3687,#3688,#3689); +#3687 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#3688 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3689 = DIRECTION('',(0.,0.,1.)); +#3690 = ADVANCED_FACE('',(#3691),#3702,.T.); +#3691 = FACE_BOUND('',#3692,.T.); +#3692 = EDGE_LOOP('',(#3693,#3694,#3695,#3701)); +#3693 = ORIENTED_EDGE('',*,*,#1548,.F.); +#3694 = ORIENTED_EDGE('',*,*,#1558,.T.); +#3695 = ORIENTED_EDGE('',*,*,#3696,.T.); +#3696 = EDGE_CURVE('',#1559,#1599,#3697,.T.); +#3697 = LINE('',#3698,#3699); +#3698 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#3699 = VECTOR('',#3700,1.); +#3700 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3701 = ORIENTED_EDGE('',*,*,#1606,.T.); +#3702 = PLANE('',#3703); +#3703 = AXIS2_PLACEMENT_3D('',#3704,#3705,#3706); +#3704 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#3705 = DIRECTION('',(0.,-0.,-1.)); +#3706 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3707 = ADVANCED_FACE('',(#3708),#3749,.F.); +#3708 = FACE_BOUND('',#3709,.F.); +#3709 = EDGE_LOOP('',(#3710,#3718,#3719,#3727,#3735,#3743)); +#3710 = ORIENTED_EDGE('',*,*,#3711,.T.); +#3711 = EDGE_CURVE('',#3712,#1599,#3714,.T.); +#3712 = VERTEX_POINT('',#3713); +#3713 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#3714 = LINE('',#3715,#3716); +#3715 = CARTESIAN_POINT('',(0.1,-2.3,-2.1)); +#3716 = VECTOR('',#3717,1.); +#3717 = DIRECTION('',(0.,0.,1.)); +#3718 = ORIENTED_EDGE('',*,*,#1598,.F.); +#3719 = ORIENTED_EDGE('',*,*,#3720,.T.); +#3720 = EDGE_CURVE('',#1591,#3721,#3723,.T.); +#3721 = VERTEX_POINT('',#3722); +#3722 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#3723 = LINE('',#3724,#3725); +#3724 = CARTESIAN_POINT('',(0.1,-1.7,0.2)); +#3725 = VECTOR('',#3726,1.); +#3726 = DIRECTION('',(0.,0.,-1.)); +#3727 = ORIENTED_EDGE('',*,*,#3728,.T.); +#3728 = EDGE_CURVE('',#3721,#3729,#3731,.T.); +#3729 = VERTEX_POINT('',#3730); +#3730 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#3731 = LINE('',#3732,#3733); +#3732 = CARTESIAN_POINT('',(0.1,-1.7,-2.1)); +#3733 = VECTOR('',#3734,1.); +#3734 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3735 = ORIENTED_EDGE('',*,*,#3736,.T.); +#3736 = EDGE_CURVE('',#3729,#3737,#3739,.T.); +#3737 = VERTEX_POINT('',#3738); +#3738 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#3739 = LINE('',#3740,#3741); +#3740 = CARTESIAN_POINT('',(0.1,-1.85,-2.7)); +#3741 = VECTOR('',#3742,1.); +#3742 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3743 = ORIENTED_EDGE('',*,*,#3744,.T.); +#3744 = EDGE_CURVE('',#3737,#3712,#3745,.T.); +#3745 = LINE('',#3746,#3747); +#3746 = CARTESIAN_POINT('',(0.1,-2.15,-2.7)); +#3747 = VECTOR('',#3748,1.); +#3748 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3749 = PLANE('',#3750); +#3750 = AXIS2_PLACEMENT_3D('',#3751,#3752,#3753); +#3751 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#3752 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3753 = DIRECTION('',(0.,0.,1.)); +#3754 = ADVANCED_FACE('',(#3755),#3766,.T.); +#3755 = FACE_BOUND('',#3756,.T.); +#3756 = EDGE_LOOP('',(#3757,#3763,#3764,#3765)); +#3757 = ORIENTED_EDGE('',*,*,#3758,.F.); +#3758 = EDGE_CURVE('',#1567,#1591,#3759,.T.); +#3759 = LINE('',#3760,#3761); +#3760 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#3761 = VECTOR('',#3762,1.); +#3762 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3763 = ORIENTED_EDGE('',*,*,#1574,.T.); +#3764 = ORIENTED_EDGE('',*,*,#1582,.T.); +#3765 = ORIENTED_EDGE('',*,*,#1590,.T.); +#3766 = PLANE('',#3767); +#3767 = AXIS2_PLACEMENT_3D('',#3768,#3769,#3770); +#3768 = CARTESIAN_POINT('',(-0.1,-2.3,0.2)); +#3769 = DIRECTION('',(0.,-0.,-1.)); +#3770 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3771 = ADVANCED_FACE('',(#3772),#3813,.T.); +#3772 = FACE_BOUND('',#3773,.T.); +#3773 = EDGE_LOOP('',(#3774,#3782,#3783,#3791,#3799,#3807)); +#3774 = ORIENTED_EDGE('',*,*,#3775,.T.); +#3775 = EDGE_CURVE('',#3776,#1559,#3778,.T.); +#3776 = VERTEX_POINT('',#3777); +#3777 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#3778 = LINE('',#3779,#3780); +#3779 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#3780 = VECTOR('',#3781,1.); +#3781 = DIRECTION('',(0.,0.,1.)); +#3782 = ORIENTED_EDGE('',*,*,#1566,.F.); +#3783 = ORIENTED_EDGE('',*,*,#3784,.T.); +#3784 = EDGE_CURVE('',#1567,#3785,#3787,.T.); +#3785 = VERTEX_POINT('',#3786); +#3786 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#3787 = LINE('',#3788,#3789); +#3788 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#3789 = VECTOR('',#3790,1.); +#3790 = DIRECTION('',(0.,0.,-1.)); +#3791 = ORIENTED_EDGE('',*,*,#3792,.T.); +#3792 = EDGE_CURVE('',#3785,#3793,#3795,.T.); +#3793 = VERTEX_POINT('',#3794); +#3794 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#3795 = LINE('',#3796,#3797); +#3796 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#3797 = VECTOR('',#3798,1.); +#3798 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3799 = ORIENTED_EDGE('',*,*,#3800,.F.); +#3800 = EDGE_CURVE('',#3801,#3793,#3803,.T.); +#3801 = VERTEX_POINT('',#3802); +#3802 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#3803 = LINE('',#3804,#3805); +#3804 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#3805 = VECTOR('',#3806,1.); +#3806 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3807 = ORIENTED_EDGE('',*,*,#3808,.T.); +#3808 = EDGE_CURVE('',#3801,#3776,#3809,.T.); +#3809 = LINE('',#3810,#3811); +#3810 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#3811 = VECTOR('',#3812,1.); +#3812 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3813 = PLANE('',#3814); +#3814 = AXIS2_PLACEMENT_3D('',#3815,#3816,#3817); +#3815 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#3816 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3817 = DIRECTION('',(0.,0.,1.)); +#3818 = ADVANCED_FACE('',(#3819),#3830,.T.); +#3819 = FACE_BOUND('',#3820,.T.); +#3820 = EDGE_LOOP('',(#3821,#3822,#3823,#3829)); +#3821 = ORIENTED_EDGE('',*,*,#1614,.F.); +#3822 = ORIENTED_EDGE('',*,*,#1624,.T.); +#3823 = ORIENTED_EDGE('',*,*,#3824,.T.); +#3824 = EDGE_CURVE('',#1625,#1665,#3825,.T.); +#3825 = LINE('',#3826,#3827); +#3826 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#3827 = VECTOR('',#3828,1.); +#3828 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3829 = ORIENTED_EDGE('',*,*,#1672,.T.); +#3830 = PLANE('',#3831); +#3831 = AXIS2_PLACEMENT_3D('',#3832,#3833,#3834); +#3832 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#3833 = DIRECTION('',(0.,-0.,-1.)); +#3834 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3835 = ADVANCED_FACE('',(#3836),#3877,.F.); +#3836 = FACE_BOUND('',#3837,.F.); +#3837 = EDGE_LOOP('',(#3838,#3846,#3847,#3855,#3863,#3871)); +#3838 = ORIENTED_EDGE('',*,*,#3839,.T.); +#3839 = EDGE_CURVE('',#3840,#1665,#3842,.T.); +#3840 = VERTEX_POINT('',#3841); +#3841 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#3842 = LINE('',#3843,#3844); +#3843 = CARTESIAN_POINT('',(0.1,-0.3,-2.1)); +#3844 = VECTOR('',#3845,1.); +#3845 = DIRECTION('',(0.,0.,1.)); +#3846 = ORIENTED_EDGE('',*,*,#1664,.F.); +#3847 = ORIENTED_EDGE('',*,*,#3848,.T.); +#3848 = EDGE_CURVE('',#1657,#3849,#3851,.T.); +#3849 = VERTEX_POINT('',#3850); +#3850 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#3851 = LINE('',#3852,#3853); +#3852 = CARTESIAN_POINT('',(0.1,0.3,0.2)); +#3853 = VECTOR('',#3854,1.); +#3854 = DIRECTION('',(0.,0.,-1.)); +#3855 = ORIENTED_EDGE('',*,*,#3856,.T.); +#3856 = EDGE_CURVE('',#3849,#3857,#3859,.T.); +#3857 = VERTEX_POINT('',#3858); +#3858 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#3859 = LINE('',#3860,#3861); +#3860 = CARTESIAN_POINT('',(0.1,0.3,-2.1)); +#3861 = VECTOR('',#3862,1.); +#3862 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3863 = ORIENTED_EDGE('',*,*,#3864,.T.); +#3864 = EDGE_CURVE('',#3857,#3865,#3867,.T.); +#3865 = VERTEX_POINT('',#3866); +#3866 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#3867 = LINE('',#3868,#3869); +#3868 = CARTESIAN_POINT('',(0.1,0.15,-2.7)); +#3869 = VECTOR('',#3870,1.); +#3870 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3871 = ORIENTED_EDGE('',*,*,#3872,.T.); +#3872 = EDGE_CURVE('',#3865,#3840,#3873,.T.); +#3873 = LINE('',#3874,#3875); +#3874 = CARTESIAN_POINT('',(0.1,-0.15,-2.7)); +#3875 = VECTOR('',#3876,1.); +#3876 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3877 = PLANE('',#3878); +#3878 = AXIS2_PLACEMENT_3D('',#3879,#3880,#3881); +#3879 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#3880 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3881 = DIRECTION('',(0.,0.,1.)); +#3882 = ADVANCED_FACE('',(#3883),#3894,.T.); +#3883 = FACE_BOUND('',#3884,.T.); +#3884 = EDGE_LOOP('',(#3885,#3891,#3892,#3893)); +#3885 = ORIENTED_EDGE('',*,*,#3886,.F.); +#3886 = EDGE_CURVE('',#1633,#1657,#3887,.T.); +#3887 = LINE('',#3888,#3889); +#3888 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#3889 = VECTOR('',#3890,1.); +#3890 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3891 = ORIENTED_EDGE('',*,*,#1640,.T.); +#3892 = ORIENTED_EDGE('',*,*,#1648,.T.); +#3893 = ORIENTED_EDGE('',*,*,#1656,.T.); +#3894 = PLANE('',#3895); +#3895 = AXIS2_PLACEMENT_3D('',#3896,#3897,#3898); +#3896 = CARTESIAN_POINT('',(-0.1,-0.3,0.2)); +#3897 = DIRECTION('',(0.,-0.,-1.)); +#3898 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#3899 = ADVANCED_FACE('',(#3900),#3941,.T.); +#3900 = FACE_BOUND('',#3901,.T.); +#3901 = EDGE_LOOP('',(#3902,#3910,#3911,#3919,#3927,#3935)); +#3902 = ORIENTED_EDGE('',*,*,#3903,.T.); +#3903 = EDGE_CURVE('',#3904,#1625,#3906,.T.); +#3904 = VERTEX_POINT('',#3905); +#3905 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#3906 = LINE('',#3907,#3908); +#3907 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#3908 = VECTOR('',#3909,1.); +#3909 = DIRECTION('',(0.,0.,1.)); +#3910 = ORIENTED_EDGE('',*,*,#1632,.F.); +#3911 = ORIENTED_EDGE('',*,*,#3912,.T.); +#3912 = EDGE_CURVE('',#1633,#3913,#3915,.T.); +#3913 = VERTEX_POINT('',#3914); +#3914 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#3915 = LINE('',#3916,#3917); +#3916 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#3917 = VECTOR('',#3918,1.); +#3918 = DIRECTION('',(0.,0.,-1.)); +#3919 = ORIENTED_EDGE('',*,*,#3920,.T.); +#3920 = EDGE_CURVE('',#3913,#3921,#3923,.T.); +#3921 = VERTEX_POINT('',#3922); +#3922 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#3923 = LINE('',#3924,#3925); +#3924 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#3925 = VECTOR('',#3926,1.); +#3926 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#3927 = ORIENTED_EDGE('',*,*,#3928,.F.); +#3928 = EDGE_CURVE('',#3929,#3921,#3931,.T.); +#3929 = VERTEX_POINT('',#3930); +#3930 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#3931 = LINE('',#3932,#3933); +#3932 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#3933 = VECTOR('',#3934,1.); +#3934 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3935 = ORIENTED_EDGE('',*,*,#3936,.T.); +#3936 = EDGE_CURVE('',#3929,#3904,#3937,.T.); +#3937 = LINE('',#3938,#3939); +#3938 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#3939 = VECTOR('',#3940,1.); +#3940 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#3941 = PLANE('',#3942); +#3942 = AXIS2_PLACEMENT_3D('',#3943,#3944,#3945); +#3943 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#3944 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3945 = DIRECTION('',(0.,0.,1.)); +#3946 = ADVANCED_FACE('',(#3947),#3972,.F.); +#3947 = FACE_BOUND('',#3948,.F.); +#3948 = EDGE_LOOP('',(#3949,#3957,#3965,#3971)); +#3949 = ORIENTED_EDGE('',*,*,#3950,.T.); +#3950 = EDGE_CURVE('',#1711,#3951,#3953,.T.); +#3951 = VERTEX_POINT('',#3952); +#3952 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#3953 = LINE('',#3954,#3955); +#3954 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#3955 = VECTOR('',#3956,1.); +#3956 = DIRECTION('',(0.,-0.,-1.)); +#3957 = ORIENTED_EDGE('',*,*,#3958,.T.); +#3958 = EDGE_CURVE('',#3951,#3959,#3961,.T.); +#3959 = VERTEX_POINT('',#3960); +#3960 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#3961 = LINE('',#3962,#3963); +#3962 = CARTESIAN_POINT('',(0.3,-18.3,0.9)); +#3963 = VECTOR('',#3964,1.); +#3964 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3965 = ORIENTED_EDGE('',*,*,#3966,.F.); +#3966 = EDGE_CURVE('',#1720,#3959,#3967,.T.); +#3967 = LINE('',#3968,#3969); +#3968 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#3969 = VECTOR('',#3970,1.); +#3970 = DIRECTION('',(0.,-0.,-1.)); +#3971 = ORIENTED_EDGE('',*,*,#1727,.F.); +#3972 = PLANE('',#3973); +#3973 = AXIS2_PLACEMENT_3D('',#3974,#3975,#3976); +#3974 = CARTESIAN_POINT('',(0.3,-18.3,5.3)); +#3975 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#3976 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#3977 = ADVANCED_FACE('',(#3978),#4028,.F.); +#3978 = FACE_BOUND('',#3979,.F.); +#3979 = EDGE_LOOP('',(#3980,#3981,#3982,#3990,#3998,#4006,#4014,#4022)); +#3980 = ORIENTED_EDGE('',*,*,#1751,.F.); +#3981 = ORIENTED_EDGE('',*,*,#3966,.T.); +#3982 = ORIENTED_EDGE('',*,*,#3983,.T.); +#3983 = EDGE_CURVE('',#3959,#3984,#3986,.T.); +#3984 = VERTEX_POINT('',#3985); +#3985 = CARTESIAN_POINT('',(0.1,-17.7,0.9)); +#3986 = LINE('',#3987,#3988); +#3987 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#3988 = VECTOR('',#3989,1.); +#3989 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#3990 = ORIENTED_EDGE('',*,*,#3991,.T.); +#3991 = EDGE_CURVE('',#3984,#3992,#3994,.T.); +#3992 = VERTEX_POINT('',#3993); +#3993 = CARTESIAN_POINT('',(0.1,-17.7,4.5)); +#3994 = LINE('',#3995,#3996); +#3995 = CARTESIAN_POINT('',(0.1,-17.7,3.874298700712)); +#3996 = VECTOR('',#3997,1.); +#3997 = DIRECTION('',(0.,-0.,1.)); +#3998 = ORIENTED_EDGE('',*,*,#3999,.F.); +#3999 = EDGE_CURVE('',#4000,#3992,#4002,.T.); +#4000 = VERTEX_POINT('',#4001); +#4001 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#4002 = LINE('',#4003,#4004); +#4003 = CARTESIAN_POINT('',(-0.1,-17.7,4.5)); +#4004 = VECTOR('',#4005,1.); +#4005 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4006 = ORIENTED_EDGE('',*,*,#4007,.F.); +#4007 = EDGE_CURVE('',#4008,#4000,#4010,.T.); +#4008 = VERTEX_POINT('',#4009); +#4009 = CARTESIAN_POINT('',(-0.1,-17.7,0.9)); +#4010 = LINE('',#4011,#4012); +#4011 = CARTESIAN_POINT('',(-0.1,-17.7,3.874298700712)); +#4012 = VECTOR('',#4013,1.); +#4013 = DIRECTION('',(0.,-0.,1.)); +#4014 = ORIENTED_EDGE('',*,*,#4015,.T.); +#4015 = EDGE_CURVE('',#4008,#4016,#4018,.T.); +#4016 = VERTEX_POINT('',#4017); +#4017 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#4018 = LINE('',#4019,#4020); +#4019 = CARTESIAN_POINT('',(0.3,-17.7,0.9)); +#4020 = VECTOR('',#4021,1.); +#4021 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4022 = ORIENTED_EDGE('',*,*,#4023,.F.); +#4023 = EDGE_CURVE('',#1744,#4016,#4024,.T.); +#4024 = LINE('',#4025,#4026); +#4025 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#4026 = VECTOR('',#4027,1.); +#4027 = DIRECTION('',(0.,-0.,-1.)); +#4028 = PLANE('',#4029); +#4029 = AXIS2_PLACEMENT_3D('',#4030,#4031,#4032); +#4030 = CARTESIAN_POINT('',(0.3,-17.7,5.3)); +#4031 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4032 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4033 = ADVANCED_FACE('',(#4034),#4052,.F.); +#4034 = FACE_BOUND('',#4035,.F.); +#4035 = EDGE_LOOP('',(#4036,#4037,#4045,#4051)); +#4036 = ORIENTED_EDGE('',*,*,#4023,.T.); +#4037 = ORIENTED_EDGE('',*,*,#4038,.T.); +#4038 = EDGE_CURVE('',#4016,#4039,#4041,.T.); +#4039 = VERTEX_POINT('',#4040); +#4040 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#4041 = LINE('',#4042,#4043); +#4042 = CARTESIAN_POINT('',(-0.3,-17.7,0.9)); +#4043 = VECTOR('',#4044,1.); +#4044 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4045 = ORIENTED_EDGE('',*,*,#4046,.F.); +#4046 = EDGE_CURVE('',#1768,#4039,#4047,.T.); +#4047 = LINE('',#4048,#4049); +#4048 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#4049 = VECTOR('',#4050,1.); +#4050 = DIRECTION('',(0.,-0.,-1.)); +#4051 = ORIENTED_EDGE('',*,*,#1775,.F.); +#4052 = PLANE('',#4053); +#4053 = AXIS2_PLACEMENT_3D('',#4054,#4055,#4056); +#4054 = CARTESIAN_POINT('',(-0.3,-17.7,5.3)); +#4055 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4056 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4057 = ADVANCED_FACE('',(#4058),#4101,.F.); +#4058 = FACE_BOUND('',#4059,.F.); +#4059 = EDGE_LOOP('',(#4060,#4061,#4062,#4070,#4078,#4086,#4094,#4100)); +#4060 = ORIENTED_EDGE('',*,*,#1792,.F.); +#4061 = ORIENTED_EDGE('',*,*,#4046,.T.); +#4062 = ORIENTED_EDGE('',*,*,#4063,.T.); +#4063 = EDGE_CURVE('',#4039,#4064,#4066,.T.); +#4064 = VERTEX_POINT('',#4065); +#4065 = CARTESIAN_POINT('',(-0.1,-18.3,0.9)); +#4066 = LINE('',#4067,#4068); +#4067 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#4068 = VECTOR('',#4069,1.); +#4069 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4070 = ORIENTED_EDGE('',*,*,#4071,.F.); +#4071 = EDGE_CURVE('',#4072,#4064,#4074,.T.); +#4072 = VERTEX_POINT('',#4073); +#4073 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#4074 = LINE('',#4075,#4076); +#4075 = CARTESIAN_POINT('',(-0.1,-18.3,3.874298700712)); +#4076 = VECTOR('',#4077,1.); +#4077 = DIRECTION('',(-0.,0.,-1.)); +#4078 = ORIENTED_EDGE('',*,*,#4079,.T.); +#4079 = EDGE_CURVE('',#4072,#4080,#4082,.T.); +#4080 = VERTEX_POINT('',#4081); +#4081 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#4082 = LINE('',#4083,#4084); +#4083 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#4084 = VECTOR('',#4085,1.); +#4085 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4086 = ORIENTED_EDGE('',*,*,#4087,.T.); +#4087 = EDGE_CURVE('',#4080,#4088,#4090,.T.); +#4088 = VERTEX_POINT('',#4089); +#4089 = CARTESIAN_POINT('',(0.1,-18.3,0.9)); +#4090 = LINE('',#4091,#4092); +#4091 = CARTESIAN_POINT('',(0.1,-18.3,3.874298700712)); +#4092 = VECTOR('',#4093,1.); +#4093 = DIRECTION('',(-0.,0.,-1.)); +#4094 = ORIENTED_EDGE('',*,*,#4095,.T.); +#4095 = EDGE_CURVE('',#4088,#3951,#4096,.T.); +#4096 = LINE('',#4097,#4098); +#4097 = CARTESIAN_POINT('',(-0.3,-18.3,0.9)); +#4098 = VECTOR('',#4099,1.); +#4099 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4100 = ORIENTED_EDGE('',*,*,#3950,.F.); +#4101 = PLANE('',#4102); +#4102 = AXIS2_PLACEMENT_3D('',#4103,#4104,#4105); +#4103 = CARTESIAN_POINT('',(-0.3,-18.3,5.3)); +#4104 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4105 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4106 = ADVANCED_FACE('',(#4107),#4132,.F.); +#4107 = FACE_BOUND('',#4108,.F.); +#4108 = EDGE_LOOP('',(#4109,#4117,#4125,#4131)); +#4109 = ORIENTED_EDGE('',*,*,#4110,.T.); +#4110 = EDGE_CURVE('',#1807,#4111,#4113,.T.); +#4111 = VERTEX_POINT('',#4112); +#4112 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#4113 = LINE('',#4114,#4115); +#4114 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#4115 = VECTOR('',#4116,1.); +#4116 = DIRECTION('',(0.,-0.,-1.)); +#4117 = ORIENTED_EDGE('',*,*,#4118,.T.); +#4118 = EDGE_CURVE('',#4111,#4119,#4121,.T.); +#4119 = VERTEX_POINT('',#4120); +#4120 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#4121 = LINE('',#4122,#4123); +#4122 = CARTESIAN_POINT('',(0.3,-16.3,0.9)); +#4123 = VECTOR('',#4124,1.); +#4124 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4125 = ORIENTED_EDGE('',*,*,#4126,.F.); +#4126 = EDGE_CURVE('',#1816,#4119,#4127,.T.); +#4127 = LINE('',#4128,#4129); +#4128 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#4129 = VECTOR('',#4130,1.); +#4130 = DIRECTION('',(0.,-0.,-1.)); +#4131 = ORIENTED_EDGE('',*,*,#1823,.F.); +#4132 = PLANE('',#4133); +#4133 = AXIS2_PLACEMENT_3D('',#4134,#4135,#4136); +#4134 = CARTESIAN_POINT('',(0.3,-16.3,5.3)); +#4135 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4136 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4137 = ADVANCED_FACE('',(#4138),#4188,.F.); +#4138 = FACE_BOUND('',#4139,.F.); +#4139 = EDGE_LOOP('',(#4140,#4141,#4142,#4150,#4158,#4166,#4174,#4182)); +#4140 = ORIENTED_EDGE('',*,*,#1847,.F.); +#4141 = ORIENTED_EDGE('',*,*,#4126,.T.); +#4142 = ORIENTED_EDGE('',*,*,#4143,.T.); +#4143 = EDGE_CURVE('',#4119,#4144,#4146,.T.); +#4144 = VERTEX_POINT('',#4145); +#4145 = CARTESIAN_POINT('',(0.1,-15.7,0.9)); +#4146 = LINE('',#4147,#4148); +#4147 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#4148 = VECTOR('',#4149,1.); +#4149 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4150 = ORIENTED_EDGE('',*,*,#4151,.T.); +#4151 = EDGE_CURVE('',#4144,#4152,#4154,.T.); +#4152 = VERTEX_POINT('',#4153); +#4153 = CARTESIAN_POINT('',(0.1,-15.7,4.5)); +#4154 = LINE('',#4155,#4156); +#4155 = CARTESIAN_POINT('',(0.1,-15.7,3.874298700712)); +#4156 = VECTOR('',#4157,1.); +#4157 = DIRECTION('',(0.,-0.,1.)); +#4158 = ORIENTED_EDGE('',*,*,#4159,.F.); +#4159 = EDGE_CURVE('',#4160,#4152,#4162,.T.); +#4160 = VERTEX_POINT('',#4161); +#4161 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#4162 = LINE('',#4163,#4164); +#4163 = CARTESIAN_POINT('',(-0.1,-15.7,4.5)); +#4164 = VECTOR('',#4165,1.); +#4165 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4166 = ORIENTED_EDGE('',*,*,#4167,.F.); +#4167 = EDGE_CURVE('',#4168,#4160,#4170,.T.); +#4168 = VERTEX_POINT('',#4169); +#4169 = CARTESIAN_POINT('',(-0.1,-15.7,0.9)); +#4170 = LINE('',#4171,#4172); +#4171 = CARTESIAN_POINT('',(-0.1,-15.7,3.874298700712)); +#4172 = VECTOR('',#4173,1.); +#4173 = DIRECTION('',(0.,-0.,1.)); +#4174 = ORIENTED_EDGE('',*,*,#4175,.T.); +#4175 = EDGE_CURVE('',#4168,#4176,#4178,.T.); +#4176 = VERTEX_POINT('',#4177); +#4177 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#4178 = LINE('',#4179,#4180); +#4179 = CARTESIAN_POINT('',(0.3,-15.7,0.9)); +#4180 = VECTOR('',#4181,1.); +#4181 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4182 = ORIENTED_EDGE('',*,*,#4183,.F.); +#4183 = EDGE_CURVE('',#1840,#4176,#4184,.T.); +#4184 = LINE('',#4185,#4186); +#4185 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#4186 = VECTOR('',#4187,1.); +#4187 = DIRECTION('',(0.,-0.,-1.)); +#4188 = PLANE('',#4189); +#4189 = AXIS2_PLACEMENT_3D('',#4190,#4191,#4192); +#4190 = CARTESIAN_POINT('',(0.3,-15.7,5.3)); +#4191 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4192 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4193 = ADVANCED_FACE('',(#4194),#4212,.F.); +#4194 = FACE_BOUND('',#4195,.F.); +#4195 = EDGE_LOOP('',(#4196,#4197,#4205,#4211)); +#4196 = ORIENTED_EDGE('',*,*,#4183,.T.); +#4197 = ORIENTED_EDGE('',*,*,#4198,.T.); +#4198 = EDGE_CURVE('',#4176,#4199,#4201,.T.); +#4199 = VERTEX_POINT('',#4200); +#4200 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#4201 = LINE('',#4202,#4203); +#4202 = CARTESIAN_POINT('',(-0.3,-15.7,0.9)); +#4203 = VECTOR('',#4204,1.); +#4204 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4205 = ORIENTED_EDGE('',*,*,#4206,.F.); +#4206 = EDGE_CURVE('',#1864,#4199,#4207,.T.); +#4207 = LINE('',#4208,#4209); +#4208 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#4209 = VECTOR('',#4210,1.); +#4210 = DIRECTION('',(0.,-0.,-1.)); +#4211 = ORIENTED_EDGE('',*,*,#1871,.F.); +#4212 = PLANE('',#4213); +#4213 = AXIS2_PLACEMENT_3D('',#4214,#4215,#4216); +#4214 = CARTESIAN_POINT('',(-0.3,-15.7,5.3)); +#4215 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4216 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4217 = ADVANCED_FACE('',(#4218),#4261,.F.); +#4218 = FACE_BOUND('',#4219,.F.); +#4219 = EDGE_LOOP('',(#4220,#4221,#4222,#4230,#4238,#4246,#4254,#4260)); +#4220 = ORIENTED_EDGE('',*,*,#1888,.F.); +#4221 = ORIENTED_EDGE('',*,*,#4206,.T.); +#4222 = ORIENTED_EDGE('',*,*,#4223,.T.); +#4223 = EDGE_CURVE('',#4199,#4224,#4226,.T.); +#4224 = VERTEX_POINT('',#4225); +#4225 = CARTESIAN_POINT('',(-0.1,-16.3,0.9)); +#4226 = LINE('',#4227,#4228); +#4227 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#4228 = VECTOR('',#4229,1.); +#4229 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4230 = ORIENTED_EDGE('',*,*,#4231,.F.); +#4231 = EDGE_CURVE('',#4232,#4224,#4234,.T.); +#4232 = VERTEX_POINT('',#4233); +#4233 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#4234 = LINE('',#4235,#4236); +#4235 = CARTESIAN_POINT('',(-0.1,-16.3,3.874298700712)); +#4236 = VECTOR('',#4237,1.); +#4237 = DIRECTION('',(-0.,0.,-1.)); +#4238 = ORIENTED_EDGE('',*,*,#4239,.T.); +#4239 = EDGE_CURVE('',#4232,#4240,#4242,.T.); +#4240 = VERTEX_POINT('',#4241); +#4241 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#4242 = LINE('',#4243,#4244); +#4243 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#4244 = VECTOR('',#4245,1.); +#4245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4246 = ORIENTED_EDGE('',*,*,#4247,.T.); +#4247 = EDGE_CURVE('',#4240,#4248,#4250,.T.); +#4248 = VERTEX_POINT('',#4249); +#4249 = CARTESIAN_POINT('',(0.1,-16.3,0.9)); +#4250 = LINE('',#4251,#4252); +#4251 = CARTESIAN_POINT('',(0.1,-16.3,3.874298700712)); +#4252 = VECTOR('',#4253,1.); +#4253 = DIRECTION('',(-0.,0.,-1.)); +#4254 = ORIENTED_EDGE('',*,*,#4255,.T.); +#4255 = EDGE_CURVE('',#4248,#4111,#4256,.T.); +#4256 = LINE('',#4257,#4258); +#4257 = CARTESIAN_POINT('',(-0.3,-16.3,0.9)); +#4258 = VECTOR('',#4259,1.); +#4259 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4260 = ORIENTED_EDGE('',*,*,#4110,.F.); +#4261 = PLANE('',#4262); +#4262 = AXIS2_PLACEMENT_3D('',#4263,#4264,#4265); +#4263 = CARTESIAN_POINT('',(-0.3,-16.3,5.3)); +#4264 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4265 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4266 = ADVANCED_FACE('',(#4267),#4292,.F.); +#4267 = FACE_BOUND('',#4268,.F.); +#4268 = EDGE_LOOP('',(#4269,#4277,#4285,#4291)); +#4269 = ORIENTED_EDGE('',*,*,#4270,.T.); +#4270 = EDGE_CURVE('',#1903,#4271,#4273,.T.); +#4271 = VERTEX_POINT('',#4272); +#4272 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#4273 = LINE('',#4274,#4275); +#4274 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#4275 = VECTOR('',#4276,1.); +#4276 = DIRECTION('',(0.,-0.,-1.)); +#4277 = ORIENTED_EDGE('',*,*,#4278,.T.); +#4278 = EDGE_CURVE('',#4271,#4279,#4281,.T.); +#4279 = VERTEX_POINT('',#4280); +#4280 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#4281 = LINE('',#4282,#4283); +#4282 = CARTESIAN_POINT('',(0.3,-14.3,0.9)); +#4283 = VECTOR('',#4284,1.); +#4284 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4285 = ORIENTED_EDGE('',*,*,#4286,.F.); +#4286 = EDGE_CURVE('',#1912,#4279,#4287,.T.); +#4287 = LINE('',#4288,#4289); +#4288 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#4289 = VECTOR('',#4290,1.); +#4290 = DIRECTION('',(0.,-0.,-1.)); +#4291 = ORIENTED_EDGE('',*,*,#1919,.F.); +#4292 = PLANE('',#4293); +#4293 = AXIS2_PLACEMENT_3D('',#4294,#4295,#4296); +#4294 = CARTESIAN_POINT('',(0.3,-14.3,5.3)); +#4295 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4296 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4297 = ADVANCED_FACE('',(#4298),#4348,.F.); +#4298 = FACE_BOUND('',#4299,.F.); +#4299 = EDGE_LOOP('',(#4300,#4301,#4302,#4310,#4318,#4326,#4334,#4342)); +#4300 = ORIENTED_EDGE('',*,*,#1943,.F.); +#4301 = ORIENTED_EDGE('',*,*,#4286,.T.); +#4302 = ORIENTED_EDGE('',*,*,#4303,.T.); +#4303 = EDGE_CURVE('',#4279,#4304,#4306,.T.); +#4304 = VERTEX_POINT('',#4305); +#4305 = CARTESIAN_POINT('',(0.1,-13.7,0.9)); +#4306 = LINE('',#4307,#4308); +#4307 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#4308 = VECTOR('',#4309,1.); +#4309 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4310 = ORIENTED_EDGE('',*,*,#4311,.T.); +#4311 = EDGE_CURVE('',#4304,#4312,#4314,.T.); +#4312 = VERTEX_POINT('',#4313); +#4313 = CARTESIAN_POINT('',(0.1,-13.7,4.5)); +#4314 = LINE('',#4315,#4316); +#4315 = CARTESIAN_POINT('',(0.1,-13.7,3.874298700712)); +#4316 = VECTOR('',#4317,1.); +#4317 = DIRECTION('',(0.,-0.,1.)); +#4318 = ORIENTED_EDGE('',*,*,#4319,.F.); +#4319 = EDGE_CURVE('',#4320,#4312,#4322,.T.); +#4320 = VERTEX_POINT('',#4321); +#4321 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#4322 = LINE('',#4323,#4324); +#4323 = CARTESIAN_POINT('',(-0.1,-13.7,4.5)); +#4324 = VECTOR('',#4325,1.); +#4325 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4326 = ORIENTED_EDGE('',*,*,#4327,.F.); +#4327 = EDGE_CURVE('',#4328,#4320,#4330,.T.); +#4328 = VERTEX_POINT('',#4329); +#4329 = CARTESIAN_POINT('',(-0.1,-13.7,0.9)); +#4330 = LINE('',#4331,#4332); +#4331 = CARTESIAN_POINT('',(-0.1,-13.7,3.874298700712)); +#4332 = VECTOR('',#4333,1.); +#4333 = DIRECTION('',(0.,-0.,1.)); +#4334 = ORIENTED_EDGE('',*,*,#4335,.T.); +#4335 = EDGE_CURVE('',#4328,#4336,#4338,.T.); +#4336 = VERTEX_POINT('',#4337); +#4337 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#4338 = LINE('',#4339,#4340); +#4339 = CARTESIAN_POINT('',(0.3,-13.7,0.9)); +#4340 = VECTOR('',#4341,1.); +#4341 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4342 = ORIENTED_EDGE('',*,*,#4343,.F.); +#4343 = EDGE_CURVE('',#1936,#4336,#4344,.T.); +#4344 = LINE('',#4345,#4346); +#4345 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#4346 = VECTOR('',#4347,1.); +#4347 = DIRECTION('',(0.,-0.,-1.)); +#4348 = PLANE('',#4349); +#4349 = AXIS2_PLACEMENT_3D('',#4350,#4351,#4352); +#4350 = CARTESIAN_POINT('',(0.3,-13.7,5.3)); +#4351 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4352 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4353 = ADVANCED_FACE('',(#4354),#4372,.F.); +#4354 = FACE_BOUND('',#4355,.F.); +#4355 = EDGE_LOOP('',(#4356,#4357,#4365,#4371)); +#4356 = ORIENTED_EDGE('',*,*,#4343,.T.); +#4357 = ORIENTED_EDGE('',*,*,#4358,.T.); +#4358 = EDGE_CURVE('',#4336,#4359,#4361,.T.); +#4359 = VERTEX_POINT('',#4360); +#4360 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#4361 = LINE('',#4362,#4363); +#4362 = CARTESIAN_POINT('',(-0.3,-13.7,0.9)); +#4363 = VECTOR('',#4364,1.); +#4364 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4365 = ORIENTED_EDGE('',*,*,#4366,.F.); +#4366 = EDGE_CURVE('',#1960,#4359,#4367,.T.); +#4367 = LINE('',#4368,#4369); +#4368 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#4369 = VECTOR('',#4370,1.); +#4370 = DIRECTION('',(0.,-0.,-1.)); +#4371 = ORIENTED_EDGE('',*,*,#1967,.F.); +#4372 = PLANE('',#4373); +#4373 = AXIS2_PLACEMENT_3D('',#4374,#4375,#4376); +#4374 = CARTESIAN_POINT('',(-0.3,-13.7,5.3)); +#4375 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4376 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4377 = ADVANCED_FACE('',(#4378),#4421,.F.); +#4378 = FACE_BOUND('',#4379,.F.); +#4379 = EDGE_LOOP('',(#4380,#4381,#4382,#4390,#4398,#4406,#4414,#4420)); +#4380 = ORIENTED_EDGE('',*,*,#1984,.F.); +#4381 = ORIENTED_EDGE('',*,*,#4366,.T.); +#4382 = ORIENTED_EDGE('',*,*,#4383,.T.); +#4383 = EDGE_CURVE('',#4359,#4384,#4386,.T.); +#4384 = VERTEX_POINT('',#4385); +#4385 = CARTESIAN_POINT('',(-0.1,-14.3,0.9)); +#4386 = LINE('',#4387,#4388); +#4387 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#4388 = VECTOR('',#4389,1.); +#4389 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4390 = ORIENTED_EDGE('',*,*,#4391,.F.); +#4391 = EDGE_CURVE('',#4392,#4384,#4394,.T.); +#4392 = VERTEX_POINT('',#4393); +#4393 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#4394 = LINE('',#4395,#4396); +#4395 = CARTESIAN_POINT('',(-0.1,-14.3,3.874298700712)); +#4396 = VECTOR('',#4397,1.); +#4397 = DIRECTION('',(-0.,0.,-1.)); +#4398 = ORIENTED_EDGE('',*,*,#4399,.T.); +#4399 = EDGE_CURVE('',#4392,#4400,#4402,.T.); +#4400 = VERTEX_POINT('',#4401); +#4401 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#4402 = LINE('',#4403,#4404); +#4403 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#4404 = VECTOR('',#4405,1.); +#4405 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4406 = ORIENTED_EDGE('',*,*,#4407,.T.); +#4407 = EDGE_CURVE('',#4400,#4408,#4410,.T.); +#4408 = VERTEX_POINT('',#4409); +#4409 = CARTESIAN_POINT('',(0.1,-14.3,0.9)); +#4410 = LINE('',#4411,#4412); +#4411 = CARTESIAN_POINT('',(0.1,-14.3,3.874298700712)); +#4412 = VECTOR('',#4413,1.); +#4413 = DIRECTION('',(-0.,0.,-1.)); +#4414 = ORIENTED_EDGE('',*,*,#4415,.T.); +#4415 = EDGE_CURVE('',#4408,#4271,#4416,.T.); +#4416 = LINE('',#4417,#4418); +#4417 = CARTESIAN_POINT('',(-0.3,-14.3,0.9)); +#4418 = VECTOR('',#4419,1.); +#4419 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4420 = ORIENTED_EDGE('',*,*,#4270,.F.); +#4421 = PLANE('',#4422); +#4422 = AXIS2_PLACEMENT_3D('',#4423,#4424,#4425); +#4423 = CARTESIAN_POINT('',(-0.3,-14.3,5.3)); +#4424 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4425 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4426 = ADVANCED_FACE('',(#4427),#4452,.F.); +#4427 = FACE_BOUND('',#4428,.F.); +#4428 = EDGE_LOOP('',(#4429,#4437,#4445,#4451)); +#4429 = ORIENTED_EDGE('',*,*,#4430,.T.); +#4430 = EDGE_CURVE('',#1999,#4431,#4433,.T.); +#4431 = VERTEX_POINT('',#4432); +#4432 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#4433 = LINE('',#4434,#4435); +#4434 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#4435 = VECTOR('',#4436,1.); +#4436 = DIRECTION('',(0.,-0.,-1.)); +#4437 = ORIENTED_EDGE('',*,*,#4438,.T.); +#4438 = EDGE_CURVE('',#4431,#4439,#4441,.T.); +#4439 = VERTEX_POINT('',#4440); +#4440 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#4441 = LINE('',#4442,#4443); +#4442 = CARTESIAN_POINT('',(0.3,-12.3,0.9)); +#4443 = VECTOR('',#4444,1.); +#4444 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4445 = ORIENTED_EDGE('',*,*,#4446,.F.); +#4446 = EDGE_CURVE('',#2008,#4439,#4447,.T.); +#4447 = LINE('',#4448,#4449); +#4448 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#4449 = VECTOR('',#4450,1.); +#4450 = DIRECTION('',(0.,-0.,-1.)); +#4451 = ORIENTED_EDGE('',*,*,#2015,.F.); +#4452 = PLANE('',#4453); +#4453 = AXIS2_PLACEMENT_3D('',#4454,#4455,#4456); +#4454 = CARTESIAN_POINT('',(0.3,-12.3,5.3)); +#4455 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4456 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4457 = ADVANCED_FACE('',(#4458),#4508,.F.); +#4458 = FACE_BOUND('',#4459,.F.); +#4459 = EDGE_LOOP('',(#4460,#4461,#4462,#4470,#4478,#4486,#4494,#4502)); +#4460 = ORIENTED_EDGE('',*,*,#2039,.F.); +#4461 = ORIENTED_EDGE('',*,*,#4446,.T.); +#4462 = ORIENTED_EDGE('',*,*,#4463,.T.); +#4463 = EDGE_CURVE('',#4439,#4464,#4466,.T.); +#4464 = VERTEX_POINT('',#4465); +#4465 = CARTESIAN_POINT('',(0.1,-11.7,0.9)); +#4466 = LINE('',#4467,#4468); +#4467 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#4468 = VECTOR('',#4469,1.); +#4469 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4470 = ORIENTED_EDGE('',*,*,#4471,.T.); +#4471 = EDGE_CURVE('',#4464,#4472,#4474,.T.); +#4472 = VERTEX_POINT('',#4473); +#4473 = CARTESIAN_POINT('',(0.1,-11.7,4.5)); +#4474 = LINE('',#4475,#4476); +#4475 = CARTESIAN_POINT('',(0.1,-11.7,3.874298700712)); +#4476 = VECTOR('',#4477,1.); +#4477 = DIRECTION('',(0.,-0.,1.)); +#4478 = ORIENTED_EDGE('',*,*,#4479,.F.); +#4479 = EDGE_CURVE('',#4480,#4472,#4482,.T.); +#4480 = VERTEX_POINT('',#4481); +#4481 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#4482 = LINE('',#4483,#4484); +#4483 = CARTESIAN_POINT('',(-0.1,-11.7,4.5)); +#4484 = VECTOR('',#4485,1.); +#4485 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4486 = ORIENTED_EDGE('',*,*,#4487,.F.); +#4487 = EDGE_CURVE('',#4488,#4480,#4490,.T.); +#4488 = VERTEX_POINT('',#4489); +#4489 = CARTESIAN_POINT('',(-0.1,-11.7,0.9)); +#4490 = LINE('',#4491,#4492); +#4491 = CARTESIAN_POINT('',(-0.1,-11.7,3.874298700712)); +#4492 = VECTOR('',#4493,1.); +#4493 = DIRECTION('',(0.,-0.,1.)); +#4494 = ORIENTED_EDGE('',*,*,#4495,.T.); +#4495 = EDGE_CURVE('',#4488,#4496,#4498,.T.); +#4496 = VERTEX_POINT('',#4497); +#4497 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#4498 = LINE('',#4499,#4500); +#4499 = CARTESIAN_POINT('',(0.3,-11.7,0.9)); +#4500 = VECTOR('',#4501,1.); +#4501 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4502 = ORIENTED_EDGE('',*,*,#4503,.F.); +#4503 = EDGE_CURVE('',#2032,#4496,#4504,.T.); +#4504 = LINE('',#4505,#4506); +#4505 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#4506 = VECTOR('',#4507,1.); +#4507 = DIRECTION('',(0.,-0.,-1.)); +#4508 = PLANE('',#4509); +#4509 = AXIS2_PLACEMENT_3D('',#4510,#4511,#4512); +#4510 = CARTESIAN_POINT('',(0.3,-11.7,5.3)); +#4511 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4512 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4513 = ADVANCED_FACE('',(#4514),#4532,.F.); +#4514 = FACE_BOUND('',#4515,.F.); +#4515 = EDGE_LOOP('',(#4516,#4517,#4525,#4531)); +#4516 = ORIENTED_EDGE('',*,*,#4503,.T.); +#4517 = ORIENTED_EDGE('',*,*,#4518,.T.); +#4518 = EDGE_CURVE('',#4496,#4519,#4521,.T.); +#4519 = VERTEX_POINT('',#4520); +#4520 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#4521 = LINE('',#4522,#4523); +#4522 = CARTESIAN_POINT('',(-0.3,-11.7,0.9)); +#4523 = VECTOR('',#4524,1.); +#4524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4525 = ORIENTED_EDGE('',*,*,#4526,.F.); +#4526 = EDGE_CURVE('',#2056,#4519,#4527,.T.); +#4527 = LINE('',#4528,#4529); +#4528 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#4529 = VECTOR('',#4530,1.); +#4530 = DIRECTION('',(0.,-0.,-1.)); +#4531 = ORIENTED_EDGE('',*,*,#2063,.F.); +#4532 = PLANE('',#4533); +#4533 = AXIS2_PLACEMENT_3D('',#4534,#4535,#4536); +#4534 = CARTESIAN_POINT('',(-0.3,-11.7,5.3)); +#4535 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4536 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4537 = ADVANCED_FACE('',(#4538),#4581,.F.); +#4538 = FACE_BOUND('',#4539,.F.); +#4539 = EDGE_LOOP('',(#4540,#4541,#4542,#4550,#4558,#4566,#4574,#4580)); +#4540 = ORIENTED_EDGE('',*,*,#2080,.F.); +#4541 = ORIENTED_EDGE('',*,*,#4526,.T.); +#4542 = ORIENTED_EDGE('',*,*,#4543,.T.); +#4543 = EDGE_CURVE('',#4519,#4544,#4546,.T.); +#4544 = VERTEX_POINT('',#4545); +#4545 = CARTESIAN_POINT('',(-0.1,-12.3,0.9)); +#4546 = LINE('',#4547,#4548); +#4547 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#4548 = VECTOR('',#4549,1.); +#4549 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4550 = ORIENTED_EDGE('',*,*,#4551,.F.); +#4551 = EDGE_CURVE('',#4552,#4544,#4554,.T.); +#4552 = VERTEX_POINT('',#4553); +#4553 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#4554 = LINE('',#4555,#4556); +#4555 = CARTESIAN_POINT('',(-0.1,-12.3,3.874298700712)); +#4556 = VECTOR('',#4557,1.); +#4557 = DIRECTION('',(-0.,0.,-1.)); +#4558 = ORIENTED_EDGE('',*,*,#4559,.T.); +#4559 = EDGE_CURVE('',#4552,#4560,#4562,.T.); +#4560 = VERTEX_POINT('',#4561); +#4561 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#4562 = LINE('',#4563,#4564); +#4563 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#4564 = VECTOR('',#4565,1.); +#4565 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4566 = ORIENTED_EDGE('',*,*,#4567,.T.); +#4567 = EDGE_CURVE('',#4560,#4568,#4570,.T.); +#4568 = VERTEX_POINT('',#4569); +#4569 = CARTESIAN_POINT('',(0.1,-12.3,0.9)); +#4570 = LINE('',#4571,#4572); +#4571 = CARTESIAN_POINT('',(0.1,-12.3,3.874298700712)); +#4572 = VECTOR('',#4573,1.); +#4573 = DIRECTION('',(-0.,0.,-1.)); +#4574 = ORIENTED_EDGE('',*,*,#4575,.T.); +#4575 = EDGE_CURVE('',#4568,#4431,#4576,.T.); +#4576 = LINE('',#4577,#4578); +#4577 = CARTESIAN_POINT('',(-0.3,-12.3,0.9)); +#4578 = VECTOR('',#4579,1.); +#4579 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4580 = ORIENTED_EDGE('',*,*,#4430,.F.); +#4581 = PLANE('',#4582); +#4582 = AXIS2_PLACEMENT_3D('',#4583,#4584,#4585); +#4583 = CARTESIAN_POINT('',(-0.3,-12.3,5.3)); +#4584 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4585 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4586 = ADVANCED_FACE('',(#4587),#4612,.F.); +#4587 = FACE_BOUND('',#4588,.F.); +#4588 = EDGE_LOOP('',(#4589,#4597,#4605,#4611)); +#4589 = ORIENTED_EDGE('',*,*,#4590,.T.); +#4590 = EDGE_CURVE('',#2095,#4591,#4593,.T.); +#4591 = VERTEX_POINT('',#4592); +#4592 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#4593 = LINE('',#4594,#4595); +#4594 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#4595 = VECTOR('',#4596,1.); +#4596 = DIRECTION('',(0.,-0.,-1.)); +#4597 = ORIENTED_EDGE('',*,*,#4598,.T.); +#4598 = EDGE_CURVE('',#4591,#4599,#4601,.T.); +#4599 = VERTEX_POINT('',#4600); +#4600 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#4601 = LINE('',#4602,#4603); +#4602 = CARTESIAN_POINT('',(0.3,-10.3,0.9)); +#4603 = VECTOR('',#4604,1.); +#4604 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4605 = ORIENTED_EDGE('',*,*,#4606,.F.); +#4606 = EDGE_CURVE('',#2104,#4599,#4607,.T.); +#4607 = LINE('',#4608,#4609); +#4608 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#4609 = VECTOR('',#4610,1.); +#4610 = DIRECTION('',(0.,-0.,-1.)); +#4611 = ORIENTED_EDGE('',*,*,#2111,.F.); +#4612 = PLANE('',#4613); +#4613 = AXIS2_PLACEMENT_3D('',#4614,#4615,#4616); +#4614 = CARTESIAN_POINT('',(0.3,-10.3,5.3)); +#4615 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4616 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4617 = ADVANCED_FACE('',(#4618),#4668,.F.); +#4618 = FACE_BOUND('',#4619,.F.); +#4619 = EDGE_LOOP('',(#4620,#4621,#4622,#4630,#4638,#4646,#4654,#4662)); +#4620 = ORIENTED_EDGE('',*,*,#2135,.F.); +#4621 = ORIENTED_EDGE('',*,*,#4606,.T.); +#4622 = ORIENTED_EDGE('',*,*,#4623,.T.); +#4623 = EDGE_CURVE('',#4599,#4624,#4626,.T.); +#4624 = VERTEX_POINT('',#4625); +#4625 = CARTESIAN_POINT('',(0.1,-9.7,0.9)); +#4626 = LINE('',#4627,#4628); +#4627 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#4628 = VECTOR('',#4629,1.); +#4629 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4630 = ORIENTED_EDGE('',*,*,#4631,.T.); +#4631 = EDGE_CURVE('',#4624,#4632,#4634,.T.); +#4632 = VERTEX_POINT('',#4633); +#4633 = CARTESIAN_POINT('',(0.1,-9.7,4.5)); +#4634 = LINE('',#4635,#4636); +#4635 = CARTESIAN_POINT('',(0.1,-9.7,3.874298700712)); +#4636 = VECTOR('',#4637,1.); +#4637 = DIRECTION('',(0.,-0.,1.)); +#4638 = ORIENTED_EDGE('',*,*,#4639,.F.); +#4639 = EDGE_CURVE('',#4640,#4632,#4642,.T.); +#4640 = VERTEX_POINT('',#4641); +#4641 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#4642 = LINE('',#4643,#4644); +#4643 = CARTESIAN_POINT('',(-0.1,-9.7,4.5)); +#4644 = VECTOR('',#4645,1.); +#4645 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4646 = ORIENTED_EDGE('',*,*,#4647,.F.); +#4647 = EDGE_CURVE('',#4648,#4640,#4650,.T.); +#4648 = VERTEX_POINT('',#4649); +#4649 = CARTESIAN_POINT('',(-0.1,-9.7,0.9)); +#4650 = LINE('',#4651,#4652); +#4651 = CARTESIAN_POINT('',(-0.1,-9.7,3.874298700712)); +#4652 = VECTOR('',#4653,1.); +#4653 = DIRECTION('',(0.,-0.,1.)); +#4654 = ORIENTED_EDGE('',*,*,#4655,.T.); +#4655 = EDGE_CURVE('',#4648,#4656,#4658,.T.); +#4656 = VERTEX_POINT('',#4657); +#4657 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#4658 = LINE('',#4659,#4660); +#4659 = CARTESIAN_POINT('',(0.3,-9.7,0.9)); +#4660 = VECTOR('',#4661,1.); +#4661 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4662 = ORIENTED_EDGE('',*,*,#4663,.F.); +#4663 = EDGE_CURVE('',#2128,#4656,#4664,.T.); +#4664 = LINE('',#4665,#4666); +#4665 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#4666 = VECTOR('',#4667,1.); +#4667 = DIRECTION('',(0.,-0.,-1.)); +#4668 = PLANE('',#4669); +#4669 = AXIS2_PLACEMENT_3D('',#4670,#4671,#4672); +#4670 = CARTESIAN_POINT('',(0.3,-9.7,5.3)); +#4671 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4672 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4673 = ADVANCED_FACE('',(#4674),#4692,.F.); +#4674 = FACE_BOUND('',#4675,.F.); +#4675 = EDGE_LOOP('',(#4676,#4677,#4685,#4691)); +#4676 = ORIENTED_EDGE('',*,*,#4663,.T.); +#4677 = ORIENTED_EDGE('',*,*,#4678,.T.); +#4678 = EDGE_CURVE('',#4656,#4679,#4681,.T.); +#4679 = VERTEX_POINT('',#4680); +#4680 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#4681 = LINE('',#4682,#4683); +#4682 = CARTESIAN_POINT('',(-0.3,-9.7,0.9)); +#4683 = VECTOR('',#4684,1.); +#4684 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4685 = ORIENTED_EDGE('',*,*,#4686,.F.); +#4686 = EDGE_CURVE('',#2152,#4679,#4687,.T.); +#4687 = LINE('',#4688,#4689); +#4688 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#4689 = VECTOR('',#4690,1.); +#4690 = DIRECTION('',(0.,-0.,-1.)); +#4691 = ORIENTED_EDGE('',*,*,#2159,.F.); +#4692 = PLANE('',#4693); +#4693 = AXIS2_PLACEMENT_3D('',#4694,#4695,#4696); +#4694 = CARTESIAN_POINT('',(-0.3,-9.7,5.3)); +#4695 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4696 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4697 = ADVANCED_FACE('',(#4698),#4741,.F.); +#4698 = FACE_BOUND('',#4699,.F.); +#4699 = EDGE_LOOP('',(#4700,#4701,#4702,#4710,#4718,#4726,#4734,#4740)); +#4700 = ORIENTED_EDGE('',*,*,#2176,.F.); +#4701 = ORIENTED_EDGE('',*,*,#4686,.T.); +#4702 = ORIENTED_EDGE('',*,*,#4703,.T.); +#4703 = EDGE_CURVE('',#4679,#4704,#4706,.T.); +#4704 = VERTEX_POINT('',#4705); +#4705 = CARTESIAN_POINT('',(-0.1,-10.3,0.9)); +#4706 = LINE('',#4707,#4708); +#4707 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#4708 = VECTOR('',#4709,1.); +#4709 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4710 = ORIENTED_EDGE('',*,*,#4711,.F.); +#4711 = EDGE_CURVE('',#4712,#4704,#4714,.T.); +#4712 = VERTEX_POINT('',#4713); +#4713 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#4714 = LINE('',#4715,#4716); +#4715 = CARTESIAN_POINT('',(-0.1,-10.3,3.874298700712)); +#4716 = VECTOR('',#4717,1.); +#4717 = DIRECTION('',(-0.,0.,-1.)); +#4718 = ORIENTED_EDGE('',*,*,#4719,.T.); +#4719 = EDGE_CURVE('',#4712,#4720,#4722,.T.); +#4720 = VERTEX_POINT('',#4721); +#4721 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#4722 = LINE('',#4723,#4724); +#4723 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#4724 = VECTOR('',#4725,1.); +#4725 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4726 = ORIENTED_EDGE('',*,*,#4727,.T.); +#4727 = EDGE_CURVE('',#4720,#4728,#4730,.T.); +#4728 = VERTEX_POINT('',#4729); +#4729 = CARTESIAN_POINT('',(0.1,-10.3,0.9)); +#4730 = LINE('',#4731,#4732); +#4731 = CARTESIAN_POINT('',(0.1,-10.3,3.874298700712)); +#4732 = VECTOR('',#4733,1.); +#4733 = DIRECTION('',(-0.,0.,-1.)); +#4734 = ORIENTED_EDGE('',*,*,#4735,.T.); +#4735 = EDGE_CURVE('',#4728,#4591,#4736,.T.); +#4736 = LINE('',#4737,#4738); +#4737 = CARTESIAN_POINT('',(-0.3,-10.3,0.9)); +#4738 = VECTOR('',#4739,1.); +#4739 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4740 = ORIENTED_EDGE('',*,*,#4590,.F.); +#4741 = PLANE('',#4742); +#4742 = AXIS2_PLACEMENT_3D('',#4743,#4744,#4745); +#4743 = CARTESIAN_POINT('',(-0.3,-10.3,5.3)); +#4744 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4745 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4746 = ADVANCED_FACE('',(#4747),#4772,.F.); +#4747 = FACE_BOUND('',#4748,.F.); +#4748 = EDGE_LOOP('',(#4749,#4757,#4765,#4771)); +#4749 = ORIENTED_EDGE('',*,*,#4750,.T.); +#4750 = EDGE_CURVE('',#2191,#4751,#4753,.T.); +#4751 = VERTEX_POINT('',#4752); +#4752 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#4753 = LINE('',#4754,#4755); +#4754 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#4755 = VECTOR('',#4756,1.); +#4756 = DIRECTION('',(0.,-0.,-1.)); +#4757 = ORIENTED_EDGE('',*,*,#4758,.T.); +#4758 = EDGE_CURVE('',#4751,#4759,#4761,.T.); +#4759 = VERTEX_POINT('',#4760); +#4760 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#4761 = LINE('',#4762,#4763); +#4762 = CARTESIAN_POINT('',(0.3,-8.3,0.9)); +#4763 = VECTOR('',#4764,1.); +#4764 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4765 = ORIENTED_EDGE('',*,*,#4766,.F.); +#4766 = EDGE_CURVE('',#2200,#4759,#4767,.T.); +#4767 = LINE('',#4768,#4769); +#4768 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#4769 = VECTOR('',#4770,1.); +#4770 = DIRECTION('',(0.,-0.,-1.)); +#4771 = ORIENTED_EDGE('',*,*,#2207,.F.); +#4772 = PLANE('',#4773); +#4773 = AXIS2_PLACEMENT_3D('',#4774,#4775,#4776); +#4774 = CARTESIAN_POINT('',(0.3,-8.3,5.3)); +#4775 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4776 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4777 = ADVANCED_FACE('',(#4778),#4828,.F.); +#4778 = FACE_BOUND('',#4779,.F.); +#4779 = EDGE_LOOP('',(#4780,#4781,#4782,#4790,#4798,#4806,#4814,#4822)); +#4780 = ORIENTED_EDGE('',*,*,#2231,.F.); +#4781 = ORIENTED_EDGE('',*,*,#4766,.T.); +#4782 = ORIENTED_EDGE('',*,*,#4783,.T.); +#4783 = EDGE_CURVE('',#4759,#4784,#4786,.T.); +#4784 = VERTEX_POINT('',#4785); +#4785 = CARTESIAN_POINT('',(0.1,-7.7,0.9)); +#4786 = LINE('',#4787,#4788); +#4787 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#4788 = VECTOR('',#4789,1.); +#4789 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4790 = ORIENTED_EDGE('',*,*,#4791,.T.); +#4791 = EDGE_CURVE('',#4784,#4792,#4794,.T.); +#4792 = VERTEX_POINT('',#4793); +#4793 = CARTESIAN_POINT('',(0.1,-7.7,4.5)); +#4794 = LINE('',#4795,#4796); +#4795 = CARTESIAN_POINT('',(0.1,-7.7,3.874298700712)); +#4796 = VECTOR('',#4797,1.); +#4797 = DIRECTION('',(0.,-0.,1.)); +#4798 = ORIENTED_EDGE('',*,*,#4799,.F.); +#4799 = EDGE_CURVE('',#4800,#4792,#4802,.T.); +#4800 = VERTEX_POINT('',#4801); +#4801 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#4802 = LINE('',#4803,#4804); +#4803 = CARTESIAN_POINT('',(-0.1,-7.7,4.5)); +#4804 = VECTOR('',#4805,1.); +#4805 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4806 = ORIENTED_EDGE('',*,*,#4807,.F.); +#4807 = EDGE_CURVE('',#4808,#4800,#4810,.T.); +#4808 = VERTEX_POINT('',#4809); +#4809 = CARTESIAN_POINT('',(-0.1,-7.7,0.9)); +#4810 = LINE('',#4811,#4812); +#4811 = CARTESIAN_POINT('',(-0.1,-7.7,3.874298700712)); +#4812 = VECTOR('',#4813,1.); +#4813 = DIRECTION('',(0.,-0.,1.)); +#4814 = ORIENTED_EDGE('',*,*,#4815,.T.); +#4815 = EDGE_CURVE('',#4808,#4816,#4818,.T.); +#4816 = VERTEX_POINT('',#4817); +#4817 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#4818 = LINE('',#4819,#4820); +#4819 = CARTESIAN_POINT('',(0.3,-7.7,0.9)); +#4820 = VECTOR('',#4821,1.); +#4821 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4822 = ORIENTED_EDGE('',*,*,#4823,.F.); +#4823 = EDGE_CURVE('',#2224,#4816,#4824,.T.); +#4824 = LINE('',#4825,#4826); +#4825 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#4826 = VECTOR('',#4827,1.); +#4827 = DIRECTION('',(0.,-0.,-1.)); +#4828 = PLANE('',#4829); +#4829 = AXIS2_PLACEMENT_3D('',#4830,#4831,#4832); +#4830 = CARTESIAN_POINT('',(0.3,-7.7,5.3)); +#4831 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4832 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4833 = ADVANCED_FACE('',(#4834),#4852,.F.); +#4834 = FACE_BOUND('',#4835,.F.); +#4835 = EDGE_LOOP('',(#4836,#4837,#4845,#4851)); +#4836 = ORIENTED_EDGE('',*,*,#4823,.T.); +#4837 = ORIENTED_EDGE('',*,*,#4838,.T.); +#4838 = EDGE_CURVE('',#4816,#4839,#4841,.T.); +#4839 = VERTEX_POINT('',#4840); +#4840 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#4841 = LINE('',#4842,#4843); +#4842 = CARTESIAN_POINT('',(-0.3,-7.7,0.9)); +#4843 = VECTOR('',#4844,1.); +#4844 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4845 = ORIENTED_EDGE('',*,*,#4846,.F.); +#4846 = EDGE_CURVE('',#2248,#4839,#4847,.T.); +#4847 = LINE('',#4848,#4849); +#4848 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#4849 = VECTOR('',#4850,1.); +#4850 = DIRECTION('',(0.,-0.,-1.)); +#4851 = ORIENTED_EDGE('',*,*,#2255,.F.); +#4852 = PLANE('',#4853); +#4853 = AXIS2_PLACEMENT_3D('',#4854,#4855,#4856); +#4854 = CARTESIAN_POINT('',(-0.3,-7.7,5.3)); +#4855 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4856 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4857 = ADVANCED_FACE('',(#4858),#4901,.F.); +#4858 = FACE_BOUND('',#4859,.F.); +#4859 = EDGE_LOOP('',(#4860,#4861,#4862,#4870,#4878,#4886,#4894,#4900)); +#4860 = ORIENTED_EDGE('',*,*,#2272,.F.); +#4861 = ORIENTED_EDGE('',*,*,#4846,.T.); +#4862 = ORIENTED_EDGE('',*,*,#4863,.T.); +#4863 = EDGE_CURVE('',#4839,#4864,#4866,.T.); +#4864 = VERTEX_POINT('',#4865); +#4865 = CARTESIAN_POINT('',(-0.1,-8.3,0.9)); +#4866 = LINE('',#4867,#4868); +#4867 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#4868 = VECTOR('',#4869,1.); +#4869 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4870 = ORIENTED_EDGE('',*,*,#4871,.F.); +#4871 = EDGE_CURVE('',#4872,#4864,#4874,.T.); +#4872 = VERTEX_POINT('',#4873); +#4873 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#4874 = LINE('',#4875,#4876); +#4875 = CARTESIAN_POINT('',(-0.1,-8.3,3.874298700712)); +#4876 = VECTOR('',#4877,1.); +#4877 = DIRECTION('',(-0.,0.,-1.)); +#4878 = ORIENTED_EDGE('',*,*,#4879,.T.); +#4879 = EDGE_CURVE('',#4872,#4880,#4882,.T.); +#4880 = VERTEX_POINT('',#4881); +#4881 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#4882 = LINE('',#4883,#4884); +#4883 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#4884 = VECTOR('',#4885,1.); +#4885 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4886 = ORIENTED_EDGE('',*,*,#4887,.T.); +#4887 = EDGE_CURVE('',#4880,#4888,#4890,.T.); +#4888 = VERTEX_POINT('',#4889); +#4889 = CARTESIAN_POINT('',(0.1,-8.3,0.9)); +#4890 = LINE('',#4891,#4892); +#4891 = CARTESIAN_POINT('',(0.1,-8.3,3.874298700712)); +#4892 = VECTOR('',#4893,1.); +#4893 = DIRECTION('',(-0.,0.,-1.)); +#4894 = ORIENTED_EDGE('',*,*,#4895,.T.); +#4895 = EDGE_CURVE('',#4888,#4751,#4896,.T.); +#4896 = LINE('',#4897,#4898); +#4897 = CARTESIAN_POINT('',(-0.3,-8.3,0.9)); +#4898 = VECTOR('',#4899,1.); +#4899 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4900 = ORIENTED_EDGE('',*,*,#4750,.F.); +#4901 = PLANE('',#4902); +#4902 = AXIS2_PLACEMENT_3D('',#4903,#4904,#4905); +#4903 = CARTESIAN_POINT('',(-0.3,-8.3,5.3)); +#4904 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#4905 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4906 = ADVANCED_FACE('',(#4907),#4932,.F.); +#4907 = FACE_BOUND('',#4908,.F.); +#4908 = EDGE_LOOP('',(#4909,#4917,#4925,#4931)); +#4909 = ORIENTED_EDGE('',*,*,#4910,.T.); +#4910 = EDGE_CURVE('',#2287,#4911,#4913,.T.); +#4911 = VERTEX_POINT('',#4912); +#4912 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#4913 = LINE('',#4914,#4915); +#4914 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#4915 = VECTOR('',#4916,1.); +#4916 = DIRECTION('',(0.,-0.,-1.)); +#4917 = ORIENTED_EDGE('',*,*,#4918,.T.); +#4918 = EDGE_CURVE('',#4911,#4919,#4921,.T.); +#4919 = VERTEX_POINT('',#4920); +#4920 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#4921 = LINE('',#4922,#4923); +#4922 = CARTESIAN_POINT('',(0.3,-6.3,0.9)); +#4923 = VECTOR('',#4924,1.); +#4924 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4925 = ORIENTED_EDGE('',*,*,#4926,.F.); +#4926 = EDGE_CURVE('',#2296,#4919,#4927,.T.); +#4927 = LINE('',#4928,#4929); +#4928 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#4929 = VECTOR('',#4930,1.); +#4930 = DIRECTION('',(0.,-0.,-1.)); +#4931 = ORIENTED_EDGE('',*,*,#2303,.F.); +#4932 = PLANE('',#4933); +#4933 = AXIS2_PLACEMENT_3D('',#4934,#4935,#4936); +#4934 = CARTESIAN_POINT('',(0.3,-6.3,5.3)); +#4935 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4936 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4937 = ADVANCED_FACE('',(#4938),#4988,.F.); +#4938 = FACE_BOUND('',#4939,.F.); +#4939 = EDGE_LOOP('',(#4940,#4941,#4942,#4950,#4958,#4966,#4974,#4982)); +#4940 = ORIENTED_EDGE('',*,*,#2327,.F.); +#4941 = ORIENTED_EDGE('',*,*,#4926,.T.); +#4942 = ORIENTED_EDGE('',*,*,#4943,.T.); +#4943 = EDGE_CURVE('',#4919,#4944,#4946,.T.); +#4944 = VERTEX_POINT('',#4945); +#4945 = CARTESIAN_POINT('',(0.1,-5.7,0.9)); +#4946 = LINE('',#4947,#4948); +#4947 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#4948 = VECTOR('',#4949,1.); +#4949 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4950 = ORIENTED_EDGE('',*,*,#4951,.T.); +#4951 = EDGE_CURVE('',#4944,#4952,#4954,.T.); +#4952 = VERTEX_POINT('',#4953); +#4953 = CARTESIAN_POINT('',(0.1,-5.7,4.5)); +#4954 = LINE('',#4955,#4956); +#4955 = CARTESIAN_POINT('',(0.1,-5.7,3.874298700712)); +#4956 = VECTOR('',#4957,1.); +#4957 = DIRECTION('',(0.,-0.,1.)); +#4958 = ORIENTED_EDGE('',*,*,#4959,.F.); +#4959 = EDGE_CURVE('',#4960,#4952,#4962,.T.); +#4960 = VERTEX_POINT('',#4961); +#4961 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#4962 = LINE('',#4963,#4964); +#4963 = CARTESIAN_POINT('',(-0.1,-5.7,4.5)); +#4964 = VECTOR('',#4965,1.); +#4965 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#4966 = ORIENTED_EDGE('',*,*,#4967,.F.); +#4967 = EDGE_CURVE('',#4968,#4960,#4970,.T.); +#4968 = VERTEX_POINT('',#4969); +#4969 = CARTESIAN_POINT('',(-0.1,-5.7,0.9)); +#4970 = LINE('',#4971,#4972); +#4971 = CARTESIAN_POINT('',(-0.1,-5.7,3.874298700712)); +#4972 = VECTOR('',#4973,1.); +#4973 = DIRECTION('',(0.,-0.,1.)); +#4974 = ORIENTED_EDGE('',*,*,#4975,.T.); +#4975 = EDGE_CURVE('',#4968,#4976,#4978,.T.); +#4976 = VERTEX_POINT('',#4977); +#4977 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#4978 = LINE('',#4979,#4980); +#4979 = CARTESIAN_POINT('',(0.3,-5.7,0.9)); +#4980 = VECTOR('',#4981,1.); +#4981 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4982 = ORIENTED_EDGE('',*,*,#4983,.F.); +#4983 = EDGE_CURVE('',#2320,#4976,#4984,.T.); +#4984 = LINE('',#4985,#4986); +#4985 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#4986 = VECTOR('',#4987,1.); +#4987 = DIRECTION('',(0.,-0.,-1.)); +#4988 = PLANE('',#4989); +#4989 = AXIS2_PLACEMENT_3D('',#4990,#4991,#4992); +#4990 = CARTESIAN_POINT('',(0.3,-5.7,5.3)); +#4991 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#4992 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#4993 = ADVANCED_FACE('',(#4994),#5012,.F.); +#4994 = FACE_BOUND('',#4995,.F.); +#4995 = EDGE_LOOP('',(#4996,#4997,#5005,#5011)); +#4996 = ORIENTED_EDGE('',*,*,#4983,.T.); +#4997 = ORIENTED_EDGE('',*,*,#4998,.T.); +#4998 = EDGE_CURVE('',#4976,#4999,#5001,.T.); +#4999 = VERTEX_POINT('',#5000); +#5000 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#5001 = LINE('',#5002,#5003); +#5002 = CARTESIAN_POINT('',(-0.3,-5.7,0.9)); +#5003 = VECTOR('',#5004,1.); +#5004 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5005 = ORIENTED_EDGE('',*,*,#5006,.F.); +#5006 = EDGE_CURVE('',#2344,#4999,#5007,.T.); +#5007 = LINE('',#5008,#5009); +#5008 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#5009 = VECTOR('',#5010,1.); +#5010 = DIRECTION('',(0.,-0.,-1.)); +#5011 = ORIENTED_EDGE('',*,*,#2351,.F.); +#5012 = PLANE('',#5013); +#5013 = AXIS2_PLACEMENT_3D('',#5014,#5015,#5016); +#5014 = CARTESIAN_POINT('',(-0.3,-5.7,5.3)); +#5015 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5016 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5017 = ADVANCED_FACE('',(#5018),#5061,.F.); +#5018 = FACE_BOUND('',#5019,.F.); +#5019 = EDGE_LOOP('',(#5020,#5021,#5022,#5030,#5038,#5046,#5054,#5060)); +#5020 = ORIENTED_EDGE('',*,*,#2368,.F.); +#5021 = ORIENTED_EDGE('',*,*,#5006,.T.); +#5022 = ORIENTED_EDGE('',*,*,#5023,.T.); +#5023 = EDGE_CURVE('',#4999,#5024,#5026,.T.); +#5024 = VERTEX_POINT('',#5025); +#5025 = CARTESIAN_POINT('',(-0.1,-6.3,0.9)); +#5026 = LINE('',#5027,#5028); +#5027 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#5028 = VECTOR('',#5029,1.); +#5029 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5030 = ORIENTED_EDGE('',*,*,#5031,.F.); +#5031 = EDGE_CURVE('',#5032,#5024,#5034,.T.); +#5032 = VERTEX_POINT('',#5033); +#5033 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#5034 = LINE('',#5035,#5036); +#5035 = CARTESIAN_POINT('',(-0.1,-6.3,3.874298700712)); +#5036 = VECTOR('',#5037,1.); +#5037 = DIRECTION('',(-0.,0.,-1.)); +#5038 = ORIENTED_EDGE('',*,*,#5039,.T.); +#5039 = EDGE_CURVE('',#5032,#5040,#5042,.T.); +#5040 = VERTEX_POINT('',#5041); +#5041 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#5042 = LINE('',#5043,#5044); +#5043 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#5044 = VECTOR('',#5045,1.); +#5045 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5046 = ORIENTED_EDGE('',*,*,#5047,.T.); +#5047 = EDGE_CURVE('',#5040,#5048,#5050,.T.); +#5048 = VERTEX_POINT('',#5049); +#5049 = CARTESIAN_POINT('',(0.1,-6.3,0.9)); +#5050 = LINE('',#5051,#5052); +#5051 = CARTESIAN_POINT('',(0.1,-6.3,3.874298700712)); +#5052 = VECTOR('',#5053,1.); +#5053 = DIRECTION('',(-0.,0.,-1.)); +#5054 = ORIENTED_EDGE('',*,*,#5055,.T.); +#5055 = EDGE_CURVE('',#5048,#4911,#5056,.T.); +#5056 = LINE('',#5057,#5058); +#5057 = CARTESIAN_POINT('',(-0.3,-6.3,0.9)); +#5058 = VECTOR('',#5059,1.); +#5059 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5060 = ORIENTED_EDGE('',*,*,#4910,.F.); +#5061 = PLANE('',#5062); +#5062 = AXIS2_PLACEMENT_3D('',#5063,#5064,#5065); +#5063 = CARTESIAN_POINT('',(-0.3,-6.3,5.3)); +#5064 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5065 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5066 = ADVANCED_FACE('',(#5067),#5092,.F.); +#5067 = FACE_BOUND('',#5068,.F.); +#5068 = EDGE_LOOP('',(#5069,#5077,#5085,#5091)); +#5069 = ORIENTED_EDGE('',*,*,#5070,.T.); +#5070 = EDGE_CURVE('',#2383,#5071,#5073,.T.); +#5071 = VERTEX_POINT('',#5072); +#5072 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#5073 = LINE('',#5074,#5075); +#5074 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#5075 = VECTOR('',#5076,1.); +#5076 = DIRECTION('',(0.,-0.,-1.)); +#5077 = ORIENTED_EDGE('',*,*,#5078,.T.); +#5078 = EDGE_CURVE('',#5071,#5079,#5081,.T.); +#5079 = VERTEX_POINT('',#5080); +#5080 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#5081 = LINE('',#5082,#5083); +#5082 = CARTESIAN_POINT('',(0.3,-4.3,0.9)); +#5083 = VECTOR('',#5084,1.); +#5084 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5085 = ORIENTED_EDGE('',*,*,#5086,.F.); +#5086 = EDGE_CURVE('',#2392,#5079,#5087,.T.); +#5087 = LINE('',#5088,#5089); +#5088 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#5089 = VECTOR('',#5090,1.); +#5090 = DIRECTION('',(0.,-0.,-1.)); +#5091 = ORIENTED_EDGE('',*,*,#2399,.F.); +#5092 = PLANE('',#5093); +#5093 = AXIS2_PLACEMENT_3D('',#5094,#5095,#5096); +#5094 = CARTESIAN_POINT('',(0.3,-4.3,5.3)); +#5095 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5096 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5097 = ADVANCED_FACE('',(#5098),#5148,.F.); +#5098 = FACE_BOUND('',#5099,.F.); +#5099 = EDGE_LOOP('',(#5100,#5101,#5102,#5110,#5118,#5126,#5134,#5142)); +#5100 = ORIENTED_EDGE('',*,*,#2423,.F.); +#5101 = ORIENTED_EDGE('',*,*,#5086,.T.); +#5102 = ORIENTED_EDGE('',*,*,#5103,.T.); +#5103 = EDGE_CURVE('',#5079,#5104,#5106,.T.); +#5104 = VERTEX_POINT('',#5105); +#5105 = CARTESIAN_POINT('',(0.1,-3.7,0.9)); +#5106 = LINE('',#5107,#5108); +#5107 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#5108 = VECTOR('',#5109,1.); +#5109 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5110 = ORIENTED_EDGE('',*,*,#5111,.T.); +#5111 = EDGE_CURVE('',#5104,#5112,#5114,.T.); +#5112 = VERTEX_POINT('',#5113); +#5113 = CARTESIAN_POINT('',(0.1,-3.7,4.5)); +#5114 = LINE('',#5115,#5116); +#5115 = CARTESIAN_POINT('',(0.1,-3.7,3.874298700712)); +#5116 = VECTOR('',#5117,1.); +#5117 = DIRECTION('',(0.,-0.,1.)); +#5118 = ORIENTED_EDGE('',*,*,#5119,.F.); +#5119 = EDGE_CURVE('',#5120,#5112,#5122,.T.); +#5120 = VERTEX_POINT('',#5121); +#5121 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#5122 = LINE('',#5123,#5124); +#5123 = CARTESIAN_POINT('',(-0.1,-3.7,4.5)); +#5124 = VECTOR('',#5125,1.); +#5125 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5126 = ORIENTED_EDGE('',*,*,#5127,.F.); +#5127 = EDGE_CURVE('',#5128,#5120,#5130,.T.); +#5128 = VERTEX_POINT('',#5129); +#5129 = CARTESIAN_POINT('',(-0.1,-3.7,0.9)); +#5130 = LINE('',#5131,#5132); +#5131 = CARTESIAN_POINT('',(-0.1,-3.7,3.874298700712)); +#5132 = VECTOR('',#5133,1.); +#5133 = DIRECTION('',(0.,-0.,1.)); +#5134 = ORIENTED_EDGE('',*,*,#5135,.T.); +#5135 = EDGE_CURVE('',#5128,#5136,#5138,.T.); +#5136 = VERTEX_POINT('',#5137); +#5137 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#5138 = LINE('',#5139,#5140); +#5139 = CARTESIAN_POINT('',(0.3,-3.7,0.9)); +#5140 = VECTOR('',#5141,1.); +#5141 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5142 = ORIENTED_EDGE('',*,*,#5143,.F.); +#5143 = EDGE_CURVE('',#2416,#5136,#5144,.T.); +#5144 = LINE('',#5145,#5146); +#5145 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#5146 = VECTOR('',#5147,1.); +#5147 = DIRECTION('',(0.,-0.,-1.)); +#5148 = PLANE('',#5149); +#5149 = AXIS2_PLACEMENT_3D('',#5150,#5151,#5152); +#5150 = CARTESIAN_POINT('',(0.3,-3.7,5.3)); +#5151 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5152 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5153 = ADVANCED_FACE('',(#5154),#5172,.F.); +#5154 = FACE_BOUND('',#5155,.F.); +#5155 = EDGE_LOOP('',(#5156,#5157,#5165,#5171)); +#5156 = ORIENTED_EDGE('',*,*,#5143,.T.); +#5157 = ORIENTED_EDGE('',*,*,#5158,.T.); +#5158 = EDGE_CURVE('',#5136,#5159,#5161,.T.); +#5159 = VERTEX_POINT('',#5160); +#5160 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#5161 = LINE('',#5162,#5163); +#5162 = CARTESIAN_POINT('',(-0.3,-3.7,0.9)); +#5163 = VECTOR('',#5164,1.); +#5164 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5165 = ORIENTED_EDGE('',*,*,#5166,.F.); +#5166 = EDGE_CURVE('',#2440,#5159,#5167,.T.); +#5167 = LINE('',#5168,#5169); +#5168 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#5169 = VECTOR('',#5170,1.); +#5170 = DIRECTION('',(0.,-0.,-1.)); +#5171 = ORIENTED_EDGE('',*,*,#2447,.F.); +#5172 = PLANE('',#5173); +#5173 = AXIS2_PLACEMENT_3D('',#5174,#5175,#5176); +#5174 = CARTESIAN_POINT('',(-0.3,-3.7,5.3)); +#5175 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5176 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5177 = ADVANCED_FACE('',(#5178),#5221,.F.); +#5178 = FACE_BOUND('',#5179,.F.); +#5179 = EDGE_LOOP('',(#5180,#5181,#5182,#5190,#5198,#5206,#5214,#5220)); +#5180 = ORIENTED_EDGE('',*,*,#2464,.F.); +#5181 = ORIENTED_EDGE('',*,*,#5166,.T.); +#5182 = ORIENTED_EDGE('',*,*,#5183,.T.); +#5183 = EDGE_CURVE('',#5159,#5184,#5186,.T.); +#5184 = VERTEX_POINT('',#5185); +#5185 = CARTESIAN_POINT('',(-0.1,-4.3,0.9)); +#5186 = LINE('',#5187,#5188); +#5187 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#5188 = VECTOR('',#5189,1.); +#5189 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5190 = ORIENTED_EDGE('',*,*,#5191,.F.); +#5191 = EDGE_CURVE('',#5192,#5184,#5194,.T.); +#5192 = VERTEX_POINT('',#5193); +#5193 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#5194 = LINE('',#5195,#5196); +#5195 = CARTESIAN_POINT('',(-0.1,-4.3,3.874298700712)); +#5196 = VECTOR('',#5197,1.); +#5197 = DIRECTION('',(-0.,0.,-1.)); +#5198 = ORIENTED_EDGE('',*,*,#5199,.T.); +#5199 = EDGE_CURVE('',#5192,#5200,#5202,.T.); +#5200 = VERTEX_POINT('',#5201); +#5201 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#5202 = LINE('',#5203,#5204); +#5203 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#5204 = VECTOR('',#5205,1.); +#5205 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5206 = ORIENTED_EDGE('',*,*,#5207,.T.); +#5207 = EDGE_CURVE('',#5200,#5208,#5210,.T.); +#5208 = VERTEX_POINT('',#5209); +#5209 = CARTESIAN_POINT('',(0.1,-4.3,0.9)); +#5210 = LINE('',#5211,#5212); +#5211 = CARTESIAN_POINT('',(0.1,-4.3,3.874298700712)); +#5212 = VECTOR('',#5213,1.); +#5213 = DIRECTION('',(-0.,0.,-1.)); +#5214 = ORIENTED_EDGE('',*,*,#5215,.T.); +#5215 = EDGE_CURVE('',#5208,#5071,#5216,.T.); +#5216 = LINE('',#5217,#5218); +#5217 = CARTESIAN_POINT('',(-0.3,-4.3,0.9)); +#5218 = VECTOR('',#5219,1.); +#5219 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5220 = ORIENTED_EDGE('',*,*,#5070,.F.); +#5221 = PLANE('',#5222); +#5222 = AXIS2_PLACEMENT_3D('',#5223,#5224,#5225); +#5223 = CARTESIAN_POINT('',(-0.3,-4.3,5.3)); +#5224 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5225 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5226 = ADVANCED_FACE('',(#5227),#5252,.F.); +#5227 = FACE_BOUND('',#5228,.F.); +#5228 = EDGE_LOOP('',(#5229,#5237,#5245,#5251)); +#5229 = ORIENTED_EDGE('',*,*,#5230,.T.); +#5230 = EDGE_CURVE('',#2479,#5231,#5233,.T.); +#5231 = VERTEX_POINT('',#5232); +#5232 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#5233 = LINE('',#5234,#5235); +#5234 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#5235 = VECTOR('',#5236,1.); +#5236 = DIRECTION('',(0.,-0.,-1.)); +#5237 = ORIENTED_EDGE('',*,*,#5238,.T.); +#5238 = EDGE_CURVE('',#5231,#5239,#5241,.T.); +#5239 = VERTEX_POINT('',#5240); +#5240 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#5241 = LINE('',#5242,#5243); +#5242 = CARTESIAN_POINT('',(0.3,-2.3,0.9)); +#5243 = VECTOR('',#5244,1.); +#5244 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5245 = ORIENTED_EDGE('',*,*,#5246,.F.); +#5246 = EDGE_CURVE('',#2488,#5239,#5247,.T.); +#5247 = LINE('',#5248,#5249); +#5248 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#5249 = VECTOR('',#5250,1.); +#5250 = DIRECTION('',(0.,-0.,-1.)); +#5251 = ORIENTED_EDGE('',*,*,#2495,.F.); +#5252 = PLANE('',#5253); +#5253 = AXIS2_PLACEMENT_3D('',#5254,#5255,#5256); +#5254 = CARTESIAN_POINT('',(0.3,-2.3,5.3)); +#5255 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5256 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5257 = ADVANCED_FACE('',(#5258),#5308,.F.); +#5258 = FACE_BOUND('',#5259,.F.); +#5259 = EDGE_LOOP('',(#5260,#5261,#5262,#5270,#5278,#5286,#5294,#5302)); +#5260 = ORIENTED_EDGE('',*,*,#2519,.F.); +#5261 = ORIENTED_EDGE('',*,*,#5246,.T.); +#5262 = ORIENTED_EDGE('',*,*,#5263,.T.); +#5263 = EDGE_CURVE('',#5239,#5264,#5266,.T.); +#5264 = VERTEX_POINT('',#5265); +#5265 = CARTESIAN_POINT('',(0.1,-1.7,0.9)); +#5266 = LINE('',#5267,#5268); +#5267 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#5268 = VECTOR('',#5269,1.); +#5269 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5270 = ORIENTED_EDGE('',*,*,#5271,.T.); +#5271 = EDGE_CURVE('',#5264,#5272,#5274,.T.); +#5272 = VERTEX_POINT('',#5273); +#5273 = CARTESIAN_POINT('',(0.1,-1.7,4.5)); +#5274 = LINE('',#5275,#5276); +#5275 = CARTESIAN_POINT('',(0.1,-1.7,3.874298700712)); +#5276 = VECTOR('',#5277,1.); +#5277 = DIRECTION('',(0.,-0.,1.)); +#5278 = ORIENTED_EDGE('',*,*,#5279,.F.); +#5279 = EDGE_CURVE('',#5280,#5272,#5282,.T.); +#5280 = VERTEX_POINT('',#5281); +#5281 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#5282 = LINE('',#5283,#5284); +#5283 = CARTESIAN_POINT('',(-0.1,-1.7,4.5)); +#5284 = VECTOR('',#5285,1.); +#5285 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5286 = ORIENTED_EDGE('',*,*,#5287,.F.); +#5287 = EDGE_CURVE('',#5288,#5280,#5290,.T.); +#5288 = VERTEX_POINT('',#5289); +#5289 = CARTESIAN_POINT('',(-0.1,-1.7,0.9)); +#5290 = LINE('',#5291,#5292); +#5291 = CARTESIAN_POINT('',(-0.1,-1.7,3.874298700712)); +#5292 = VECTOR('',#5293,1.); +#5293 = DIRECTION('',(0.,-0.,1.)); +#5294 = ORIENTED_EDGE('',*,*,#5295,.T.); +#5295 = EDGE_CURVE('',#5288,#5296,#5298,.T.); +#5296 = VERTEX_POINT('',#5297); +#5297 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#5298 = LINE('',#5299,#5300); +#5299 = CARTESIAN_POINT('',(0.3,-1.7,0.9)); +#5300 = VECTOR('',#5301,1.); +#5301 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5302 = ORIENTED_EDGE('',*,*,#5303,.F.); +#5303 = EDGE_CURVE('',#2512,#5296,#5304,.T.); +#5304 = LINE('',#5305,#5306); +#5305 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#5306 = VECTOR('',#5307,1.); +#5307 = DIRECTION('',(0.,-0.,-1.)); +#5308 = PLANE('',#5309); +#5309 = AXIS2_PLACEMENT_3D('',#5310,#5311,#5312); +#5310 = CARTESIAN_POINT('',(0.3,-1.7,5.3)); +#5311 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5312 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5313 = ADVANCED_FACE('',(#5314),#5332,.F.); +#5314 = FACE_BOUND('',#5315,.F.); +#5315 = EDGE_LOOP('',(#5316,#5317,#5325,#5331)); +#5316 = ORIENTED_EDGE('',*,*,#5303,.T.); +#5317 = ORIENTED_EDGE('',*,*,#5318,.T.); +#5318 = EDGE_CURVE('',#5296,#5319,#5321,.T.); +#5319 = VERTEX_POINT('',#5320); +#5320 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#5321 = LINE('',#5322,#5323); +#5322 = CARTESIAN_POINT('',(-0.3,-1.7,0.9)); +#5323 = VECTOR('',#5324,1.); +#5324 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5325 = ORIENTED_EDGE('',*,*,#5326,.F.); +#5326 = EDGE_CURVE('',#2536,#5319,#5327,.T.); +#5327 = LINE('',#5328,#5329); +#5328 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#5329 = VECTOR('',#5330,1.); +#5330 = DIRECTION('',(0.,-0.,-1.)); +#5331 = ORIENTED_EDGE('',*,*,#2543,.F.); +#5332 = PLANE('',#5333); +#5333 = AXIS2_PLACEMENT_3D('',#5334,#5335,#5336); +#5334 = CARTESIAN_POINT('',(-0.3,-1.7,5.3)); +#5335 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5336 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5337 = ADVANCED_FACE('',(#5338),#5381,.F.); +#5338 = FACE_BOUND('',#5339,.F.); +#5339 = EDGE_LOOP('',(#5340,#5341,#5342,#5350,#5358,#5366,#5374,#5380)); +#5340 = ORIENTED_EDGE('',*,*,#2560,.F.); +#5341 = ORIENTED_EDGE('',*,*,#5326,.T.); +#5342 = ORIENTED_EDGE('',*,*,#5343,.T.); +#5343 = EDGE_CURVE('',#5319,#5344,#5346,.T.); +#5344 = VERTEX_POINT('',#5345); +#5345 = CARTESIAN_POINT('',(-0.1,-2.3,0.9)); +#5346 = LINE('',#5347,#5348); +#5347 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#5348 = VECTOR('',#5349,1.); +#5349 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5350 = ORIENTED_EDGE('',*,*,#5351,.F.); +#5351 = EDGE_CURVE('',#5352,#5344,#5354,.T.); +#5352 = VERTEX_POINT('',#5353); +#5353 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#5354 = LINE('',#5355,#5356); +#5355 = CARTESIAN_POINT('',(-0.1,-2.3,3.874298700712)); +#5356 = VECTOR('',#5357,1.); +#5357 = DIRECTION('',(-0.,0.,-1.)); +#5358 = ORIENTED_EDGE('',*,*,#5359,.T.); +#5359 = EDGE_CURVE('',#5352,#5360,#5362,.T.); +#5360 = VERTEX_POINT('',#5361); +#5361 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#5362 = LINE('',#5363,#5364); +#5363 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#5364 = VECTOR('',#5365,1.); +#5365 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5366 = ORIENTED_EDGE('',*,*,#5367,.T.); +#5367 = EDGE_CURVE('',#5360,#5368,#5370,.T.); +#5368 = VERTEX_POINT('',#5369); +#5369 = CARTESIAN_POINT('',(0.1,-2.3,0.9)); +#5370 = LINE('',#5371,#5372); +#5371 = CARTESIAN_POINT('',(0.1,-2.3,3.874298700712)); +#5372 = VECTOR('',#5373,1.); +#5373 = DIRECTION('',(-0.,0.,-1.)); +#5374 = ORIENTED_EDGE('',*,*,#5375,.T.); +#5375 = EDGE_CURVE('',#5368,#5231,#5376,.T.); +#5376 = LINE('',#5377,#5378); +#5377 = CARTESIAN_POINT('',(-0.3,-2.3,0.9)); +#5378 = VECTOR('',#5379,1.); +#5379 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5380 = ORIENTED_EDGE('',*,*,#5230,.F.); +#5381 = PLANE('',#5382); +#5382 = AXIS2_PLACEMENT_3D('',#5383,#5384,#5385); +#5383 = CARTESIAN_POINT('',(-0.3,-2.3,5.3)); +#5384 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5385 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5386 = ADVANCED_FACE('',(#5387),#5412,.F.); +#5387 = FACE_BOUND('',#5388,.F.); +#5388 = EDGE_LOOP('',(#5389,#5397,#5405,#5411)); +#5389 = ORIENTED_EDGE('',*,*,#5390,.T.); +#5390 = EDGE_CURVE('',#2575,#5391,#5393,.T.); +#5391 = VERTEX_POINT('',#5392); +#5392 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#5393 = LINE('',#5394,#5395); +#5394 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#5395 = VECTOR('',#5396,1.); +#5396 = DIRECTION('',(0.,-0.,-1.)); +#5397 = ORIENTED_EDGE('',*,*,#5398,.T.); +#5398 = EDGE_CURVE('',#5391,#5399,#5401,.T.); +#5399 = VERTEX_POINT('',#5400); +#5400 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#5401 = LINE('',#5402,#5403); +#5402 = CARTESIAN_POINT('',(0.3,-0.3,0.9)); +#5403 = VECTOR('',#5404,1.); +#5404 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5405 = ORIENTED_EDGE('',*,*,#5406,.F.); +#5406 = EDGE_CURVE('',#2584,#5399,#5407,.T.); +#5407 = LINE('',#5408,#5409); +#5408 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#5409 = VECTOR('',#5410,1.); +#5410 = DIRECTION('',(0.,-0.,-1.)); +#5411 = ORIENTED_EDGE('',*,*,#2591,.F.); +#5412 = PLANE('',#5413); +#5413 = AXIS2_PLACEMENT_3D('',#5414,#5415,#5416); +#5414 = CARTESIAN_POINT('',(0.3,-0.3,5.3)); +#5415 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5416 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5417 = ADVANCED_FACE('',(#5418),#5468,.F.); +#5418 = FACE_BOUND('',#5419,.F.); +#5419 = EDGE_LOOP('',(#5420,#5421,#5422,#5430,#5438,#5446,#5454,#5462)); +#5420 = ORIENTED_EDGE('',*,*,#2615,.F.); +#5421 = ORIENTED_EDGE('',*,*,#5406,.T.); +#5422 = ORIENTED_EDGE('',*,*,#5423,.T.); +#5423 = EDGE_CURVE('',#5399,#5424,#5426,.T.); +#5424 = VERTEX_POINT('',#5425); +#5425 = CARTESIAN_POINT('',(0.1,0.3,0.9)); +#5426 = LINE('',#5427,#5428); +#5427 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#5428 = VECTOR('',#5429,1.); +#5429 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5430 = ORIENTED_EDGE('',*,*,#5431,.T.); +#5431 = EDGE_CURVE('',#5424,#5432,#5434,.T.); +#5432 = VERTEX_POINT('',#5433); +#5433 = CARTESIAN_POINT('',(0.1,0.3,4.5)); +#5434 = LINE('',#5435,#5436); +#5435 = CARTESIAN_POINT('',(0.1,0.3,3.874298700712)); +#5436 = VECTOR('',#5437,1.); +#5437 = DIRECTION('',(0.,-0.,1.)); +#5438 = ORIENTED_EDGE('',*,*,#5439,.F.); +#5439 = EDGE_CURVE('',#5440,#5432,#5442,.T.); +#5440 = VERTEX_POINT('',#5441); +#5441 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#5442 = LINE('',#5443,#5444); +#5443 = CARTESIAN_POINT('',(-0.1,0.3,4.5)); +#5444 = VECTOR('',#5445,1.); +#5445 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5446 = ORIENTED_EDGE('',*,*,#5447,.F.); +#5447 = EDGE_CURVE('',#5448,#5440,#5450,.T.); +#5448 = VERTEX_POINT('',#5449); +#5449 = CARTESIAN_POINT('',(-0.1,0.3,0.9)); +#5450 = LINE('',#5451,#5452); +#5451 = CARTESIAN_POINT('',(-0.1,0.3,3.874298700712)); +#5452 = VECTOR('',#5453,1.); +#5453 = DIRECTION('',(0.,-0.,1.)); +#5454 = ORIENTED_EDGE('',*,*,#5455,.T.); +#5455 = EDGE_CURVE('',#5448,#5456,#5458,.T.); +#5456 = VERTEX_POINT('',#5457); +#5457 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#5458 = LINE('',#5459,#5460); +#5459 = CARTESIAN_POINT('',(0.3,0.3,0.9)); +#5460 = VECTOR('',#5461,1.); +#5461 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5462 = ORIENTED_EDGE('',*,*,#5463,.F.); +#5463 = EDGE_CURVE('',#2608,#5456,#5464,.T.); +#5464 = LINE('',#5465,#5466); +#5465 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#5466 = VECTOR('',#5467,1.); +#5467 = DIRECTION('',(0.,-0.,-1.)); +#5468 = PLANE('',#5469); +#5469 = AXIS2_PLACEMENT_3D('',#5470,#5471,#5472); +#5470 = CARTESIAN_POINT('',(0.3,0.3,5.3)); +#5471 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5472 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5473 = ADVANCED_FACE('',(#5474),#5492,.F.); +#5474 = FACE_BOUND('',#5475,.F.); +#5475 = EDGE_LOOP('',(#5476,#5477,#5485,#5491)); +#5476 = ORIENTED_EDGE('',*,*,#5463,.T.); +#5477 = ORIENTED_EDGE('',*,*,#5478,.T.); +#5478 = EDGE_CURVE('',#5456,#5479,#5481,.T.); +#5479 = VERTEX_POINT('',#5480); +#5480 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#5481 = LINE('',#5482,#5483); +#5482 = CARTESIAN_POINT('',(-0.3,0.3,0.9)); +#5483 = VECTOR('',#5484,1.); +#5484 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5485 = ORIENTED_EDGE('',*,*,#5486,.F.); +#5486 = EDGE_CURVE('',#2632,#5479,#5487,.T.); +#5487 = LINE('',#5488,#5489); +#5488 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#5489 = VECTOR('',#5490,1.); +#5490 = DIRECTION('',(0.,-0.,-1.)); +#5491 = ORIENTED_EDGE('',*,*,#2639,.F.); +#5492 = PLANE('',#5493); +#5493 = AXIS2_PLACEMENT_3D('',#5494,#5495,#5496); +#5494 = CARTESIAN_POINT('',(-0.3,0.3,5.3)); +#5495 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#5496 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5497 = ADVANCED_FACE('',(#5498),#5541,.F.); +#5498 = FACE_BOUND('',#5499,.F.); +#5499 = EDGE_LOOP('',(#5500,#5501,#5502,#5510,#5518,#5526,#5534,#5540)); +#5500 = ORIENTED_EDGE('',*,*,#2656,.F.); +#5501 = ORIENTED_EDGE('',*,*,#5486,.T.); +#5502 = ORIENTED_EDGE('',*,*,#5503,.T.); +#5503 = EDGE_CURVE('',#5479,#5504,#5506,.T.); +#5504 = VERTEX_POINT('',#5505); +#5505 = CARTESIAN_POINT('',(-0.1,-0.3,0.9)); +#5506 = LINE('',#5507,#5508); +#5507 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#5508 = VECTOR('',#5509,1.); +#5509 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5510 = ORIENTED_EDGE('',*,*,#5511,.F.); +#5511 = EDGE_CURVE('',#5512,#5504,#5514,.T.); +#5512 = VERTEX_POINT('',#5513); +#5513 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#5514 = LINE('',#5515,#5516); +#5515 = CARTESIAN_POINT('',(-0.1,-0.3,3.874298700712)); +#5516 = VECTOR('',#5517,1.); +#5517 = DIRECTION('',(-0.,0.,-1.)); +#5518 = ORIENTED_EDGE('',*,*,#5519,.T.); +#5519 = EDGE_CURVE('',#5512,#5520,#5522,.T.); +#5520 = VERTEX_POINT('',#5521); +#5521 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#5522 = LINE('',#5523,#5524); +#5523 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#5524 = VECTOR('',#5525,1.); +#5525 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5526 = ORIENTED_EDGE('',*,*,#5527,.T.); +#5527 = EDGE_CURVE('',#5520,#5528,#5530,.T.); +#5528 = VERTEX_POINT('',#5529); +#5529 = CARTESIAN_POINT('',(0.1,-0.3,0.9)); +#5530 = LINE('',#5531,#5532); +#5531 = CARTESIAN_POINT('',(0.1,-0.3,3.874298700712)); +#5532 = VECTOR('',#5533,1.); +#5533 = DIRECTION('',(-0.,0.,-1.)); +#5534 = ORIENTED_EDGE('',*,*,#5535,.T.); +#5535 = EDGE_CURVE('',#5528,#5391,#5536,.T.); +#5536 = LINE('',#5537,#5538); +#5537 = CARTESIAN_POINT('',(-0.3,-0.3,0.9)); +#5538 = VECTOR('',#5539,1.); +#5539 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5540 = ORIENTED_EDGE('',*,*,#5390,.F.); +#5541 = PLANE('',#5542); +#5542 = AXIS2_PLACEMENT_3D('',#5543,#5544,#5545); +#5543 = CARTESIAN_POINT('',(-0.3,-0.3,5.3)); +#5544 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5545 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5546 = ADVANCED_FACE('',(#5547),#5558,.T.); +#5547 = FACE_BOUND('',#5548,.T.); +#5548 = EDGE_LOOP('',(#5549,#5555,#5556,#5557)); +#5549 = ORIENTED_EDGE('',*,*,#5550,.T.); +#5550 = EDGE_CURVE('',#2752,#2688,#5551,.T.); +#5551 = LINE('',#5552,#5553); +#5552 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#5553 = VECTOR('',#5554,1.); +#5554 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5555 = ORIENTED_EDGE('',*,*,#2687,.T.); +#5556 = ORIENTED_EDGE('',*,*,#2672,.F.); +#5557 = ORIENTED_EDGE('',*,*,#2751,.F.); +#5558 = PLANE('',#5559); +#5559 = AXIS2_PLACEMENT_3D('',#5560,#5561,#5562); +#5560 = CARTESIAN_POINT('',(-0.1,-18.3,-2.1)); +#5561 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5562 = DIRECTION('',(0.,0.,1.)); +#5563 = ADVANCED_FACE('',(#5564),#5575,.T.); +#5564 = FACE_BOUND('',#5565,.T.); +#5565 = EDGE_LOOP('',(#5566,#5572,#5573,#5574)); +#5566 = ORIENTED_EDGE('',*,*,#5567,.T.); +#5567 = EDGE_CURVE('',#2777,#2713,#5568,.T.); +#5568 = LINE('',#5569,#5570); +#5569 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#5570 = VECTOR('',#5571,1.); +#5571 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5572 = ORIENTED_EDGE('',*,*,#2720,.T.); +#5573 = ORIENTED_EDGE('',*,*,#5550,.F.); +#5574 = ORIENTED_EDGE('',*,*,#2784,.F.); +#5575 = PLANE('',#5576); +#5576 = AXIS2_PLACEMENT_3D('',#5577,#5578,#5579); +#5577 = CARTESIAN_POINT('',(-0.1,-18.15,-2.7)); +#5578 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5579 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5580 = ADVANCED_FACE('',(#5581),#5592,.T.); +#5581 = FACE_BOUND('',#5582,.T.); +#5582 = EDGE_LOOP('',(#5583,#5589,#5590,#5591)); +#5583 = ORIENTED_EDGE('',*,*,#5584,.T.); +#5584 = EDGE_CURVE('',#2769,#2705,#5585,.T.); +#5585 = LINE('',#5586,#5587); +#5586 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#5587 = VECTOR('',#5588,1.); +#5588 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5589 = ORIENTED_EDGE('',*,*,#2712,.T.); +#5590 = ORIENTED_EDGE('',*,*,#5567,.F.); +#5591 = ORIENTED_EDGE('',*,*,#2776,.T.); +#5592 = PLANE('',#5593); +#5593 = AXIS2_PLACEMENT_3D('',#5594,#5595,#5596); +#5594 = CARTESIAN_POINT('',(-0.1,-17.85,-2.7)); +#5595 = DIRECTION('',(0.,-0.,-1.)); +#5596 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5597 = ADVANCED_FACE('',(#5598),#5609,.T.); +#5598 = FACE_BOUND('',#5599,.T.); +#5599 = EDGE_LOOP('',(#5600,#5606,#5607,#5608)); +#5600 = ORIENTED_EDGE('',*,*,#5601,.T.); +#5601 = EDGE_CURVE('',#2761,#2697,#5602,.T.); +#5602 = LINE('',#5603,#5604); +#5603 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#5604 = VECTOR('',#5605,1.); +#5605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5606 = ORIENTED_EDGE('',*,*,#2704,.T.); +#5607 = ORIENTED_EDGE('',*,*,#5584,.F.); +#5608 = ORIENTED_EDGE('',*,*,#2768,.F.); +#5609 = PLANE('',#5610); +#5610 = AXIS2_PLACEMENT_3D('',#5611,#5612,#5613); +#5611 = CARTESIAN_POINT('',(-0.1,-17.7,-2.1)); +#5612 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#5613 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#5614 = ADVANCED_FACE('',(#5615),#5621,.T.); +#5615 = FACE_BOUND('',#5616,.T.); +#5616 = EDGE_LOOP('',(#5617,#5618,#5619,#5620)); +#5617 = ORIENTED_EDGE('',*,*,#2734,.T.); +#5618 = ORIENTED_EDGE('',*,*,#2696,.T.); +#5619 = ORIENTED_EDGE('',*,*,#5601,.F.); +#5620 = ORIENTED_EDGE('',*,*,#2760,.F.); +#5621 = PLANE('',#5622); +#5622 = AXIS2_PLACEMENT_3D('',#5623,#5624,#5625); +#5623 = CARTESIAN_POINT('',(-0.1,-17.7,0.2)); +#5624 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5625 = DIRECTION('',(0.,0.,-1.)); +#5626 = ADVANCED_FACE('',(#5627),#5638,.T.); +#5627 = FACE_BOUND('',#5628,.T.); +#5628 = EDGE_LOOP('',(#5629,#5635,#5636,#5637)); +#5629 = ORIENTED_EDGE('',*,*,#5630,.T.); +#5630 = EDGE_CURVE('',#2880,#2816,#5631,.T.); +#5631 = LINE('',#5632,#5633); +#5632 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#5633 = VECTOR('',#5634,1.); +#5634 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5635 = ORIENTED_EDGE('',*,*,#2815,.T.); +#5636 = ORIENTED_EDGE('',*,*,#2800,.F.); +#5637 = ORIENTED_EDGE('',*,*,#2879,.F.); +#5638 = PLANE('',#5639); +#5639 = AXIS2_PLACEMENT_3D('',#5640,#5641,#5642); +#5640 = CARTESIAN_POINT('',(-0.1,-16.3,-2.1)); +#5641 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5642 = DIRECTION('',(0.,0.,1.)); +#5643 = ADVANCED_FACE('',(#5644),#5655,.T.); +#5644 = FACE_BOUND('',#5645,.T.); +#5645 = EDGE_LOOP('',(#5646,#5652,#5653,#5654)); +#5646 = ORIENTED_EDGE('',*,*,#5647,.T.); +#5647 = EDGE_CURVE('',#2905,#2841,#5648,.T.); +#5648 = LINE('',#5649,#5650); +#5649 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#5650 = VECTOR('',#5651,1.); +#5651 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5652 = ORIENTED_EDGE('',*,*,#2848,.T.); +#5653 = ORIENTED_EDGE('',*,*,#5630,.F.); +#5654 = ORIENTED_EDGE('',*,*,#2912,.F.); +#5655 = PLANE('',#5656); +#5656 = AXIS2_PLACEMENT_3D('',#5657,#5658,#5659); +#5657 = CARTESIAN_POINT('',(-0.1,-16.15,-2.7)); +#5658 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5659 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5660 = ADVANCED_FACE('',(#5661),#5672,.T.); +#5661 = FACE_BOUND('',#5662,.T.); +#5662 = EDGE_LOOP('',(#5663,#5669,#5670,#5671)); +#5663 = ORIENTED_EDGE('',*,*,#5664,.T.); +#5664 = EDGE_CURVE('',#2897,#2833,#5665,.T.); +#5665 = LINE('',#5666,#5667); +#5666 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#5667 = VECTOR('',#5668,1.); +#5668 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5669 = ORIENTED_EDGE('',*,*,#2840,.T.); +#5670 = ORIENTED_EDGE('',*,*,#5647,.F.); +#5671 = ORIENTED_EDGE('',*,*,#2904,.T.); +#5672 = PLANE('',#5673); +#5673 = AXIS2_PLACEMENT_3D('',#5674,#5675,#5676); +#5674 = CARTESIAN_POINT('',(-0.1,-15.85,-2.7)); +#5675 = DIRECTION('',(0.,-0.,-1.)); +#5676 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5677 = ADVANCED_FACE('',(#5678),#5689,.T.); +#5678 = FACE_BOUND('',#5679,.T.); +#5679 = EDGE_LOOP('',(#5680,#5686,#5687,#5688)); +#5680 = ORIENTED_EDGE('',*,*,#5681,.T.); +#5681 = EDGE_CURVE('',#2889,#2825,#5682,.T.); +#5682 = LINE('',#5683,#5684); +#5683 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#5684 = VECTOR('',#5685,1.); +#5685 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5686 = ORIENTED_EDGE('',*,*,#2832,.T.); +#5687 = ORIENTED_EDGE('',*,*,#5664,.F.); +#5688 = ORIENTED_EDGE('',*,*,#2896,.F.); +#5689 = PLANE('',#5690); +#5690 = AXIS2_PLACEMENT_3D('',#5691,#5692,#5693); +#5691 = CARTESIAN_POINT('',(-0.1,-15.7,-2.1)); +#5692 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#5693 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#5694 = ADVANCED_FACE('',(#5695),#5701,.T.); +#5695 = FACE_BOUND('',#5696,.T.); +#5696 = EDGE_LOOP('',(#5697,#5698,#5699,#5700)); +#5697 = ORIENTED_EDGE('',*,*,#2862,.T.); +#5698 = ORIENTED_EDGE('',*,*,#2824,.T.); +#5699 = ORIENTED_EDGE('',*,*,#5681,.F.); +#5700 = ORIENTED_EDGE('',*,*,#2888,.F.); +#5701 = PLANE('',#5702); +#5702 = AXIS2_PLACEMENT_3D('',#5703,#5704,#5705); +#5703 = CARTESIAN_POINT('',(-0.1,-15.7,0.2)); +#5704 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5705 = DIRECTION('',(0.,0.,-1.)); +#5706 = ADVANCED_FACE('',(#5707),#5718,.T.); +#5707 = FACE_BOUND('',#5708,.T.); +#5708 = EDGE_LOOP('',(#5709,#5715,#5716,#5717)); +#5709 = ORIENTED_EDGE('',*,*,#5710,.T.); +#5710 = EDGE_CURVE('',#3008,#2944,#5711,.T.); +#5711 = LINE('',#5712,#5713); +#5712 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#5713 = VECTOR('',#5714,1.); +#5714 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5715 = ORIENTED_EDGE('',*,*,#2943,.T.); +#5716 = ORIENTED_EDGE('',*,*,#2928,.F.); +#5717 = ORIENTED_EDGE('',*,*,#3007,.F.); +#5718 = PLANE('',#5719); +#5719 = AXIS2_PLACEMENT_3D('',#5720,#5721,#5722); +#5720 = CARTESIAN_POINT('',(-0.1,-14.3,-2.1)); +#5721 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5722 = DIRECTION('',(0.,0.,1.)); +#5723 = ADVANCED_FACE('',(#5724),#5735,.T.); +#5724 = FACE_BOUND('',#5725,.T.); +#5725 = EDGE_LOOP('',(#5726,#5732,#5733,#5734)); +#5726 = ORIENTED_EDGE('',*,*,#5727,.T.); +#5727 = EDGE_CURVE('',#3033,#2969,#5728,.T.); +#5728 = LINE('',#5729,#5730); +#5729 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#5730 = VECTOR('',#5731,1.); +#5731 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5732 = ORIENTED_EDGE('',*,*,#2976,.T.); +#5733 = ORIENTED_EDGE('',*,*,#5710,.F.); +#5734 = ORIENTED_EDGE('',*,*,#3040,.F.); +#5735 = PLANE('',#5736); +#5736 = AXIS2_PLACEMENT_3D('',#5737,#5738,#5739); +#5737 = CARTESIAN_POINT('',(-0.1,-14.15,-2.7)); +#5738 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5739 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5740 = ADVANCED_FACE('',(#5741),#5752,.T.); +#5741 = FACE_BOUND('',#5742,.T.); +#5742 = EDGE_LOOP('',(#5743,#5749,#5750,#5751)); +#5743 = ORIENTED_EDGE('',*,*,#5744,.T.); +#5744 = EDGE_CURVE('',#3025,#2961,#5745,.T.); +#5745 = LINE('',#5746,#5747); +#5746 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#5747 = VECTOR('',#5748,1.); +#5748 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5749 = ORIENTED_EDGE('',*,*,#2968,.T.); +#5750 = ORIENTED_EDGE('',*,*,#5727,.F.); +#5751 = ORIENTED_EDGE('',*,*,#3032,.T.); +#5752 = PLANE('',#5753); +#5753 = AXIS2_PLACEMENT_3D('',#5754,#5755,#5756); +#5754 = CARTESIAN_POINT('',(-0.1,-13.85,-2.7)); +#5755 = DIRECTION('',(0.,-0.,-1.)); +#5756 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5757 = ADVANCED_FACE('',(#5758),#5769,.T.); +#5758 = FACE_BOUND('',#5759,.T.); +#5759 = EDGE_LOOP('',(#5760,#5766,#5767,#5768)); +#5760 = ORIENTED_EDGE('',*,*,#5761,.T.); +#5761 = EDGE_CURVE('',#3017,#2953,#5762,.T.); +#5762 = LINE('',#5763,#5764); +#5763 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#5764 = VECTOR('',#5765,1.); +#5765 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5766 = ORIENTED_EDGE('',*,*,#2960,.T.); +#5767 = ORIENTED_EDGE('',*,*,#5744,.F.); +#5768 = ORIENTED_EDGE('',*,*,#3024,.F.); +#5769 = PLANE('',#5770); +#5770 = AXIS2_PLACEMENT_3D('',#5771,#5772,#5773); +#5771 = CARTESIAN_POINT('',(-0.1,-13.7,-2.1)); +#5772 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#5773 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#5774 = ADVANCED_FACE('',(#5775),#5781,.T.); +#5775 = FACE_BOUND('',#5776,.T.); +#5776 = EDGE_LOOP('',(#5777,#5778,#5779,#5780)); +#5777 = ORIENTED_EDGE('',*,*,#2990,.T.); +#5778 = ORIENTED_EDGE('',*,*,#2952,.T.); +#5779 = ORIENTED_EDGE('',*,*,#5761,.F.); +#5780 = ORIENTED_EDGE('',*,*,#3016,.F.); +#5781 = PLANE('',#5782); +#5782 = AXIS2_PLACEMENT_3D('',#5783,#5784,#5785); +#5783 = CARTESIAN_POINT('',(-0.1,-13.7,0.2)); +#5784 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5785 = DIRECTION('',(0.,0.,-1.)); +#5786 = ADVANCED_FACE('',(#5787),#5798,.T.); +#5787 = FACE_BOUND('',#5788,.T.); +#5788 = EDGE_LOOP('',(#5789,#5795,#5796,#5797)); +#5789 = ORIENTED_EDGE('',*,*,#5790,.T.); +#5790 = EDGE_CURVE('',#3136,#3072,#5791,.T.); +#5791 = LINE('',#5792,#5793); +#5792 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#5793 = VECTOR('',#5794,1.); +#5794 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5795 = ORIENTED_EDGE('',*,*,#3071,.T.); +#5796 = ORIENTED_EDGE('',*,*,#3056,.F.); +#5797 = ORIENTED_EDGE('',*,*,#3135,.F.); +#5798 = PLANE('',#5799); +#5799 = AXIS2_PLACEMENT_3D('',#5800,#5801,#5802); +#5800 = CARTESIAN_POINT('',(-0.1,-12.3,-2.1)); +#5801 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5802 = DIRECTION('',(0.,0.,1.)); +#5803 = ADVANCED_FACE('',(#5804),#5815,.T.); +#5804 = FACE_BOUND('',#5805,.T.); +#5805 = EDGE_LOOP('',(#5806,#5812,#5813,#5814)); +#5806 = ORIENTED_EDGE('',*,*,#5807,.T.); +#5807 = EDGE_CURVE('',#3161,#3097,#5808,.T.); +#5808 = LINE('',#5809,#5810); +#5809 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#5810 = VECTOR('',#5811,1.); +#5811 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5812 = ORIENTED_EDGE('',*,*,#3104,.T.); +#5813 = ORIENTED_EDGE('',*,*,#5790,.F.); +#5814 = ORIENTED_EDGE('',*,*,#3168,.F.); +#5815 = PLANE('',#5816); +#5816 = AXIS2_PLACEMENT_3D('',#5817,#5818,#5819); +#5817 = CARTESIAN_POINT('',(-0.1,-12.15,-2.7)); +#5818 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5819 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5820 = ADVANCED_FACE('',(#5821),#5832,.T.); +#5821 = FACE_BOUND('',#5822,.T.); +#5822 = EDGE_LOOP('',(#5823,#5829,#5830,#5831)); +#5823 = ORIENTED_EDGE('',*,*,#5824,.T.); +#5824 = EDGE_CURVE('',#3153,#3089,#5825,.T.); +#5825 = LINE('',#5826,#5827); +#5826 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#5827 = VECTOR('',#5828,1.); +#5828 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5829 = ORIENTED_EDGE('',*,*,#3096,.T.); +#5830 = ORIENTED_EDGE('',*,*,#5807,.F.); +#5831 = ORIENTED_EDGE('',*,*,#3160,.T.); +#5832 = PLANE('',#5833); +#5833 = AXIS2_PLACEMENT_3D('',#5834,#5835,#5836); +#5834 = CARTESIAN_POINT('',(-0.1,-11.85,-2.7)); +#5835 = DIRECTION('',(0.,-0.,-1.)); +#5836 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5837 = ADVANCED_FACE('',(#5838),#5849,.T.); +#5838 = FACE_BOUND('',#5839,.T.); +#5839 = EDGE_LOOP('',(#5840,#5846,#5847,#5848)); +#5840 = ORIENTED_EDGE('',*,*,#5841,.T.); +#5841 = EDGE_CURVE('',#3145,#3081,#5842,.T.); +#5842 = LINE('',#5843,#5844); +#5843 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#5844 = VECTOR('',#5845,1.); +#5845 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5846 = ORIENTED_EDGE('',*,*,#3088,.T.); +#5847 = ORIENTED_EDGE('',*,*,#5824,.F.); +#5848 = ORIENTED_EDGE('',*,*,#3152,.F.); +#5849 = PLANE('',#5850); +#5850 = AXIS2_PLACEMENT_3D('',#5851,#5852,#5853); +#5851 = CARTESIAN_POINT('',(-0.1,-11.7,-2.1)); +#5852 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#5853 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#5854 = ADVANCED_FACE('',(#5855),#5861,.T.); +#5855 = FACE_BOUND('',#5856,.T.); +#5856 = EDGE_LOOP('',(#5857,#5858,#5859,#5860)); +#5857 = ORIENTED_EDGE('',*,*,#3118,.T.); +#5858 = ORIENTED_EDGE('',*,*,#3080,.T.); +#5859 = ORIENTED_EDGE('',*,*,#5841,.F.); +#5860 = ORIENTED_EDGE('',*,*,#3144,.F.); +#5861 = PLANE('',#5862); +#5862 = AXIS2_PLACEMENT_3D('',#5863,#5864,#5865); +#5863 = CARTESIAN_POINT('',(-0.1,-11.7,0.2)); +#5864 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5865 = DIRECTION('',(0.,0.,-1.)); +#5866 = ADVANCED_FACE('',(#5867),#5878,.T.); +#5867 = FACE_BOUND('',#5868,.T.); +#5868 = EDGE_LOOP('',(#5869,#5875,#5876,#5877)); +#5869 = ORIENTED_EDGE('',*,*,#5870,.T.); +#5870 = EDGE_CURVE('',#3264,#3200,#5871,.T.); +#5871 = LINE('',#5872,#5873); +#5872 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#5873 = VECTOR('',#5874,1.); +#5874 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5875 = ORIENTED_EDGE('',*,*,#3199,.T.); +#5876 = ORIENTED_EDGE('',*,*,#3184,.F.); +#5877 = ORIENTED_EDGE('',*,*,#3263,.F.); +#5878 = PLANE('',#5879); +#5879 = AXIS2_PLACEMENT_3D('',#5880,#5881,#5882); +#5880 = CARTESIAN_POINT('',(-0.1,-10.3,-2.1)); +#5881 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5882 = DIRECTION('',(0.,0.,1.)); +#5883 = ADVANCED_FACE('',(#5884),#5895,.T.); +#5884 = FACE_BOUND('',#5885,.T.); +#5885 = EDGE_LOOP('',(#5886,#5892,#5893,#5894)); +#5886 = ORIENTED_EDGE('',*,*,#5887,.T.); +#5887 = EDGE_CURVE('',#3289,#3225,#5888,.T.); +#5888 = LINE('',#5889,#5890); +#5889 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#5890 = VECTOR('',#5891,1.); +#5891 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5892 = ORIENTED_EDGE('',*,*,#3232,.T.); +#5893 = ORIENTED_EDGE('',*,*,#5870,.F.); +#5894 = ORIENTED_EDGE('',*,*,#3296,.F.); +#5895 = PLANE('',#5896); +#5896 = AXIS2_PLACEMENT_3D('',#5897,#5898,#5899); +#5897 = CARTESIAN_POINT('',(-0.1,-10.15,-2.7)); +#5898 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5899 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5900 = ADVANCED_FACE('',(#5901),#5912,.T.); +#5901 = FACE_BOUND('',#5902,.T.); +#5902 = EDGE_LOOP('',(#5903,#5909,#5910,#5911)); +#5903 = ORIENTED_EDGE('',*,*,#5904,.T.); +#5904 = EDGE_CURVE('',#3281,#3217,#5905,.T.); +#5905 = LINE('',#5906,#5907); +#5906 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#5907 = VECTOR('',#5908,1.); +#5908 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5909 = ORIENTED_EDGE('',*,*,#3224,.T.); +#5910 = ORIENTED_EDGE('',*,*,#5887,.F.); +#5911 = ORIENTED_EDGE('',*,*,#3288,.T.); +#5912 = PLANE('',#5913); +#5913 = AXIS2_PLACEMENT_3D('',#5914,#5915,#5916); +#5914 = CARTESIAN_POINT('',(-0.1,-9.85,-2.7)); +#5915 = DIRECTION('',(0.,-0.,-1.)); +#5916 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5917 = ADVANCED_FACE('',(#5918),#5929,.T.); +#5918 = FACE_BOUND('',#5919,.T.); +#5919 = EDGE_LOOP('',(#5920,#5926,#5927,#5928)); +#5920 = ORIENTED_EDGE('',*,*,#5921,.T.); +#5921 = EDGE_CURVE('',#3273,#3209,#5922,.T.); +#5922 = LINE('',#5923,#5924); +#5923 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#5924 = VECTOR('',#5925,1.); +#5925 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5926 = ORIENTED_EDGE('',*,*,#3216,.T.); +#5927 = ORIENTED_EDGE('',*,*,#5904,.F.); +#5928 = ORIENTED_EDGE('',*,*,#3280,.F.); +#5929 = PLANE('',#5930); +#5930 = AXIS2_PLACEMENT_3D('',#5931,#5932,#5933); +#5931 = CARTESIAN_POINT('',(-0.1,-9.7,-2.1)); +#5932 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#5933 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#5934 = ADVANCED_FACE('',(#5935),#5941,.T.); +#5935 = FACE_BOUND('',#5936,.T.); +#5936 = EDGE_LOOP('',(#5937,#5938,#5939,#5940)); +#5937 = ORIENTED_EDGE('',*,*,#3246,.T.); +#5938 = ORIENTED_EDGE('',*,*,#3208,.T.); +#5939 = ORIENTED_EDGE('',*,*,#5921,.F.); +#5940 = ORIENTED_EDGE('',*,*,#3272,.F.); +#5941 = PLANE('',#5942); +#5942 = AXIS2_PLACEMENT_3D('',#5943,#5944,#5945); +#5943 = CARTESIAN_POINT('',(-0.1,-9.7,0.2)); +#5944 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#5945 = DIRECTION('',(0.,0.,-1.)); +#5946 = ADVANCED_FACE('',(#5947),#5958,.T.); +#5947 = FACE_BOUND('',#5948,.T.); +#5948 = EDGE_LOOP('',(#5949,#5955,#5956,#5957)); +#5949 = ORIENTED_EDGE('',*,*,#5950,.T.); +#5950 = EDGE_CURVE('',#3392,#3328,#5951,.T.); +#5951 = LINE('',#5952,#5953); +#5952 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#5953 = VECTOR('',#5954,1.); +#5954 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5955 = ORIENTED_EDGE('',*,*,#3327,.T.); +#5956 = ORIENTED_EDGE('',*,*,#3312,.F.); +#5957 = ORIENTED_EDGE('',*,*,#3391,.F.); +#5958 = PLANE('',#5959); +#5959 = AXIS2_PLACEMENT_3D('',#5960,#5961,#5962); +#5960 = CARTESIAN_POINT('',(-0.1,-8.3,-2.1)); +#5961 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5962 = DIRECTION('',(0.,0.,1.)); +#5963 = ADVANCED_FACE('',(#5964),#5975,.T.); +#5964 = FACE_BOUND('',#5965,.T.); +#5965 = EDGE_LOOP('',(#5966,#5972,#5973,#5974)); +#5966 = ORIENTED_EDGE('',*,*,#5967,.T.); +#5967 = EDGE_CURVE('',#3417,#3353,#5968,.T.); +#5968 = LINE('',#5969,#5970); +#5969 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#5970 = VECTOR('',#5971,1.); +#5971 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5972 = ORIENTED_EDGE('',*,*,#3360,.T.); +#5973 = ORIENTED_EDGE('',*,*,#5950,.F.); +#5974 = ORIENTED_EDGE('',*,*,#3424,.F.); +#5975 = PLANE('',#5976); +#5976 = AXIS2_PLACEMENT_3D('',#5977,#5978,#5979); +#5977 = CARTESIAN_POINT('',(-0.1,-8.15,-2.7)); +#5978 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#5979 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#5980 = ADVANCED_FACE('',(#5981),#5992,.T.); +#5981 = FACE_BOUND('',#5982,.T.); +#5982 = EDGE_LOOP('',(#5983,#5989,#5990,#5991)); +#5983 = ORIENTED_EDGE('',*,*,#5984,.T.); +#5984 = EDGE_CURVE('',#3409,#3345,#5985,.T.); +#5985 = LINE('',#5986,#5987); +#5986 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#5987 = VECTOR('',#5988,1.); +#5988 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#5989 = ORIENTED_EDGE('',*,*,#3352,.T.); +#5990 = ORIENTED_EDGE('',*,*,#5967,.F.); +#5991 = ORIENTED_EDGE('',*,*,#3416,.T.); +#5992 = PLANE('',#5993); +#5993 = AXIS2_PLACEMENT_3D('',#5994,#5995,#5996); +#5994 = CARTESIAN_POINT('',(-0.1,-7.85,-2.7)); +#5995 = DIRECTION('',(0.,-0.,-1.)); +#5996 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#5997 = ADVANCED_FACE('',(#5998),#6009,.T.); +#5998 = FACE_BOUND('',#5999,.T.); +#5999 = EDGE_LOOP('',(#6000,#6006,#6007,#6008)); +#6000 = ORIENTED_EDGE('',*,*,#6001,.T.); +#6001 = EDGE_CURVE('',#3401,#3337,#6002,.T.); +#6002 = LINE('',#6003,#6004); +#6003 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#6004 = VECTOR('',#6005,1.); +#6005 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6006 = ORIENTED_EDGE('',*,*,#3344,.T.); +#6007 = ORIENTED_EDGE('',*,*,#5984,.F.); +#6008 = ORIENTED_EDGE('',*,*,#3408,.F.); +#6009 = PLANE('',#6010); +#6010 = AXIS2_PLACEMENT_3D('',#6011,#6012,#6013); +#6011 = CARTESIAN_POINT('',(-0.1,-7.7,-2.1)); +#6012 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#6013 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#6014 = ADVANCED_FACE('',(#6015),#6021,.T.); +#6015 = FACE_BOUND('',#6016,.T.); +#6016 = EDGE_LOOP('',(#6017,#6018,#6019,#6020)); +#6017 = ORIENTED_EDGE('',*,*,#3374,.T.); +#6018 = ORIENTED_EDGE('',*,*,#3336,.T.); +#6019 = ORIENTED_EDGE('',*,*,#6001,.F.); +#6020 = ORIENTED_EDGE('',*,*,#3400,.F.); +#6021 = PLANE('',#6022); +#6022 = AXIS2_PLACEMENT_3D('',#6023,#6024,#6025); +#6023 = CARTESIAN_POINT('',(-0.1,-7.7,0.2)); +#6024 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6025 = DIRECTION('',(0.,0.,-1.)); +#6026 = ADVANCED_FACE('',(#6027),#6038,.T.); +#6027 = FACE_BOUND('',#6028,.T.); +#6028 = EDGE_LOOP('',(#6029,#6035,#6036,#6037)); +#6029 = ORIENTED_EDGE('',*,*,#6030,.T.); +#6030 = EDGE_CURVE('',#3520,#3456,#6031,.T.); +#6031 = LINE('',#6032,#6033); +#6032 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#6033 = VECTOR('',#6034,1.); +#6034 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6035 = ORIENTED_EDGE('',*,*,#3455,.T.); +#6036 = ORIENTED_EDGE('',*,*,#3440,.F.); +#6037 = ORIENTED_EDGE('',*,*,#3519,.F.); +#6038 = PLANE('',#6039); +#6039 = AXIS2_PLACEMENT_3D('',#6040,#6041,#6042); +#6040 = CARTESIAN_POINT('',(-0.1,-6.3,-2.1)); +#6041 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6042 = DIRECTION('',(0.,0.,1.)); +#6043 = ADVANCED_FACE('',(#6044),#6055,.T.); +#6044 = FACE_BOUND('',#6045,.T.); +#6045 = EDGE_LOOP('',(#6046,#6052,#6053,#6054)); +#6046 = ORIENTED_EDGE('',*,*,#6047,.T.); +#6047 = EDGE_CURVE('',#3545,#3481,#6048,.T.); +#6048 = LINE('',#6049,#6050); +#6049 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#6050 = VECTOR('',#6051,1.); +#6051 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6052 = ORIENTED_EDGE('',*,*,#3488,.T.); +#6053 = ORIENTED_EDGE('',*,*,#6030,.F.); +#6054 = ORIENTED_EDGE('',*,*,#3552,.F.); +#6055 = PLANE('',#6056); +#6056 = AXIS2_PLACEMENT_3D('',#6057,#6058,#6059); +#6057 = CARTESIAN_POINT('',(-0.1,-6.15,-2.7)); +#6058 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#6059 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#6060 = ADVANCED_FACE('',(#6061),#6072,.T.); +#6061 = FACE_BOUND('',#6062,.T.); +#6062 = EDGE_LOOP('',(#6063,#6069,#6070,#6071)); +#6063 = ORIENTED_EDGE('',*,*,#6064,.T.); +#6064 = EDGE_CURVE('',#3537,#3473,#6065,.T.); +#6065 = LINE('',#6066,#6067); +#6066 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#6067 = VECTOR('',#6068,1.); +#6068 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6069 = ORIENTED_EDGE('',*,*,#3480,.T.); +#6070 = ORIENTED_EDGE('',*,*,#6047,.F.); +#6071 = ORIENTED_EDGE('',*,*,#3544,.T.); +#6072 = PLANE('',#6073); +#6073 = AXIS2_PLACEMENT_3D('',#6074,#6075,#6076); +#6074 = CARTESIAN_POINT('',(-0.1,-5.85,-2.7)); +#6075 = DIRECTION('',(0.,-0.,-1.)); +#6076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6077 = ADVANCED_FACE('',(#6078),#6089,.T.); +#6078 = FACE_BOUND('',#6079,.T.); +#6079 = EDGE_LOOP('',(#6080,#6086,#6087,#6088)); +#6080 = ORIENTED_EDGE('',*,*,#6081,.T.); +#6081 = EDGE_CURVE('',#3529,#3465,#6082,.T.); +#6082 = LINE('',#6083,#6084); +#6083 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#6084 = VECTOR('',#6085,1.); +#6085 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6086 = ORIENTED_EDGE('',*,*,#3472,.T.); +#6087 = ORIENTED_EDGE('',*,*,#6064,.F.); +#6088 = ORIENTED_EDGE('',*,*,#3536,.F.); +#6089 = PLANE('',#6090); +#6090 = AXIS2_PLACEMENT_3D('',#6091,#6092,#6093); +#6091 = CARTESIAN_POINT('',(-0.1,-5.7,-2.1)); +#6092 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#6093 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#6094 = ADVANCED_FACE('',(#6095),#6101,.T.); +#6095 = FACE_BOUND('',#6096,.T.); +#6096 = EDGE_LOOP('',(#6097,#6098,#6099,#6100)); +#6097 = ORIENTED_EDGE('',*,*,#3502,.T.); +#6098 = ORIENTED_EDGE('',*,*,#3464,.T.); +#6099 = ORIENTED_EDGE('',*,*,#6081,.F.); +#6100 = ORIENTED_EDGE('',*,*,#3528,.F.); +#6101 = PLANE('',#6102); +#6102 = AXIS2_PLACEMENT_3D('',#6103,#6104,#6105); +#6103 = CARTESIAN_POINT('',(-0.1,-5.7,0.2)); +#6104 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6105 = DIRECTION('',(0.,0.,-1.)); +#6106 = ADVANCED_FACE('',(#6107),#6118,.T.); +#6107 = FACE_BOUND('',#6108,.T.); +#6108 = EDGE_LOOP('',(#6109,#6115,#6116,#6117)); +#6109 = ORIENTED_EDGE('',*,*,#6110,.T.); +#6110 = EDGE_CURVE('',#3648,#3584,#6111,.T.); +#6111 = LINE('',#6112,#6113); +#6112 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#6113 = VECTOR('',#6114,1.); +#6114 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6115 = ORIENTED_EDGE('',*,*,#3583,.T.); +#6116 = ORIENTED_EDGE('',*,*,#3568,.F.); +#6117 = ORIENTED_EDGE('',*,*,#3647,.F.); +#6118 = PLANE('',#6119); +#6119 = AXIS2_PLACEMENT_3D('',#6120,#6121,#6122); +#6120 = CARTESIAN_POINT('',(-0.1,-4.3,-2.1)); +#6121 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6122 = DIRECTION('',(0.,0.,1.)); +#6123 = ADVANCED_FACE('',(#6124),#6135,.T.); +#6124 = FACE_BOUND('',#6125,.T.); +#6125 = EDGE_LOOP('',(#6126,#6132,#6133,#6134)); +#6126 = ORIENTED_EDGE('',*,*,#6127,.T.); +#6127 = EDGE_CURVE('',#3673,#3609,#6128,.T.); +#6128 = LINE('',#6129,#6130); +#6129 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#6130 = VECTOR('',#6131,1.); +#6131 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6132 = ORIENTED_EDGE('',*,*,#3616,.T.); +#6133 = ORIENTED_EDGE('',*,*,#6110,.F.); +#6134 = ORIENTED_EDGE('',*,*,#3680,.F.); +#6135 = PLANE('',#6136); +#6136 = AXIS2_PLACEMENT_3D('',#6137,#6138,#6139); +#6137 = CARTESIAN_POINT('',(-0.1,-4.15,-2.7)); +#6138 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#6139 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#6140 = ADVANCED_FACE('',(#6141),#6152,.T.); +#6141 = FACE_BOUND('',#6142,.T.); +#6142 = EDGE_LOOP('',(#6143,#6149,#6150,#6151)); +#6143 = ORIENTED_EDGE('',*,*,#6144,.T.); +#6144 = EDGE_CURVE('',#3665,#3601,#6145,.T.); +#6145 = LINE('',#6146,#6147); +#6146 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#6147 = VECTOR('',#6148,1.); +#6148 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6149 = ORIENTED_EDGE('',*,*,#3608,.T.); +#6150 = ORIENTED_EDGE('',*,*,#6127,.F.); +#6151 = ORIENTED_EDGE('',*,*,#3672,.T.); +#6152 = PLANE('',#6153); +#6153 = AXIS2_PLACEMENT_3D('',#6154,#6155,#6156); +#6154 = CARTESIAN_POINT('',(-0.1,-3.85,-2.7)); +#6155 = DIRECTION('',(0.,-0.,-1.)); +#6156 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6157 = ADVANCED_FACE('',(#6158),#6169,.T.); +#6158 = FACE_BOUND('',#6159,.T.); +#6159 = EDGE_LOOP('',(#6160,#6166,#6167,#6168)); +#6160 = ORIENTED_EDGE('',*,*,#6161,.T.); +#6161 = EDGE_CURVE('',#3657,#3593,#6162,.T.); +#6162 = LINE('',#6163,#6164); +#6163 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#6164 = VECTOR('',#6165,1.); +#6165 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6166 = ORIENTED_EDGE('',*,*,#3600,.T.); +#6167 = ORIENTED_EDGE('',*,*,#6144,.F.); +#6168 = ORIENTED_EDGE('',*,*,#3664,.F.); +#6169 = PLANE('',#6170); +#6170 = AXIS2_PLACEMENT_3D('',#6171,#6172,#6173); +#6171 = CARTESIAN_POINT('',(-0.1,-3.7,-2.1)); +#6172 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#6173 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#6174 = ADVANCED_FACE('',(#6175),#6181,.T.); +#6175 = FACE_BOUND('',#6176,.T.); +#6176 = EDGE_LOOP('',(#6177,#6178,#6179,#6180)); +#6177 = ORIENTED_EDGE('',*,*,#3630,.T.); +#6178 = ORIENTED_EDGE('',*,*,#3592,.T.); +#6179 = ORIENTED_EDGE('',*,*,#6161,.F.); +#6180 = ORIENTED_EDGE('',*,*,#3656,.F.); +#6181 = PLANE('',#6182); +#6182 = AXIS2_PLACEMENT_3D('',#6183,#6184,#6185); +#6183 = CARTESIAN_POINT('',(-0.1,-3.7,0.2)); +#6184 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6185 = DIRECTION('',(0.,0.,-1.)); +#6186 = ADVANCED_FACE('',(#6187),#6198,.T.); +#6187 = FACE_BOUND('',#6188,.T.); +#6188 = EDGE_LOOP('',(#6189,#6195,#6196,#6197)); +#6189 = ORIENTED_EDGE('',*,*,#6190,.T.); +#6190 = EDGE_CURVE('',#3776,#3712,#6191,.T.); +#6191 = LINE('',#6192,#6193); +#6192 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#6193 = VECTOR('',#6194,1.); +#6194 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6195 = ORIENTED_EDGE('',*,*,#3711,.T.); +#6196 = ORIENTED_EDGE('',*,*,#3696,.F.); +#6197 = ORIENTED_EDGE('',*,*,#3775,.F.); +#6198 = PLANE('',#6199); +#6199 = AXIS2_PLACEMENT_3D('',#6200,#6201,#6202); +#6200 = CARTESIAN_POINT('',(-0.1,-2.3,-2.1)); +#6201 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6202 = DIRECTION('',(0.,0.,1.)); +#6203 = ADVANCED_FACE('',(#6204),#6215,.T.); +#6204 = FACE_BOUND('',#6205,.T.); +#6205 = EDGE_LOOP('',(#6206,#6212,#6213,#6214)); +#6206 = ORIENTED_EDGE('',*,*,#6207,.T.); +#6207 = EDGE_CURVE('',#3801,#3737,#6208,.T.); +#6208 = LINE('',#6209,#6210); +#6209 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#6210 = VECTOR('',#6211,1.); +#6211 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6212 = ORIENTED_EDGE('',*,*,#3744,.T.); +#6213 = ORIENTED_EDGE('',*,*,#6190,.F.); +#6214 = ORIENTED_EDGE('',*,*,#3808,.F.); +#6215 = PLANE('',#6216); +#6216 = AXIS2_PLACEMENT_3D('',#6217,#6218,#6219); +#6217 = CARTESIAN_POINT('',(-0.1,-2.15,-2.7)); +#6218 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#6219 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#6220 = ADVANCED_FACE('',(#6221),#6232,.T.); +#6221 = FACE_BOUND('',#6222,.T.); +#6222 = EDGE_LOOP('',(#6223,#6229,#6230,#6231)); +#6223 = ORIENTED_EDGE('',*,*,#6224,.T.); +#6224 = EDGE_CURVE('',#3793,#3729,#6225,.T.); +#6225 = LINE('',#6226,#6227); +#6226 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#6227 = VECTOR('',#6228,1.); +#6228 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6229 = ORIENTED_EDGE('',*,*,#3736,.T.); +#6230 = ORIENTED_EDGE('',*,*,#6207,.F.); +#6231 = ORIENTED_EDGE('',*,*,#3800,.T.); +#6232 = PLANE('',#6233); +#6233 = AXIS2_PLACEMENT_3D('',#6234,#6235,#6236); +#6234 = CARTESIAN_POINT('',(-0.1,-1.85,-2.7)); +#6235 = DIRECTION('',(0.,-0.,-1.)); +#6236 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6237 = ADVANCED_FACE('',(#6238),#6249,.T.); +#6238 = FACE_BOUND('',#6239,.T.); +#6239 = EDGE_LOOP('',(#6240,#6246,#6247,#6248)); +#6240 = ORIENTED_EDGE('',*,*,#6241,.T.); +#6241 = EDGE_CURVE('',#3785,#3721,#6242,.T.); +#6242 = LINE('',#6243,#6244); +#6243 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#6244 = VECTOR('',#6245,1.); +#6245 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6246 = ORIENTED_EDGE('',*,*,#3728,.T.); +#6247 = ORIENTED_EDGE('',*,*,#6224,.F.); +#6248 = ORIENTED_EDGE('',*,*,#3792,.F.); +#6249 = PLANE('',#6250); +#6250 = AXIS2_PLACEMENT_3D('',#6251,#6252,#6253); +#6251 = CARTESIAN_POINT('',(-0.1,-1.7,-2.1)); +#6252 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#6253 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#6254 = ADVANCED_FACE('',(#6255),#6261,.T.); +#6255 = FACE_BOUND('',#6256,.T.); +#6256 = EDGE_LOOP('',(#6257,#6258,#6259,#6260)); +#6257 = ORIENTED_EDGE('',*,*,#3758,.T.); +#6258 = ORIENTED_EDGE('',*,*,#3720,.T.); +#6259 = ORIENTED_EDGE('',*,*,#6241,.F.); +#6260 = ORIENTED_EDGE('',*,*,#3784,.F.); +#6261 = PLANE('',#6262); +#6262 = AXIS2_PLACEMENT_3D('',#6263,#6264,#6265); +#6263 = CARTESIAN_POINT('',(-0.1,-1.7,0.2)); +#6264 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6265 = DIRECTION('',(0.,0.,-1.)); +#6266 = ADVANCED_FACE('',(#6267),#6278,.T.); +#6267 = FACE_BOUND('',#6268,.T.); +#6268 = EDGE_LOOP('',(#6269,#6275,#6276,#6277)); +#6269 = ORIENTED_EDGE('',*,*,#6270,.T.); +#6270 = EDGE_CURVE('',#3904,#3840,#6271,.T.); +#6271 = LINE('',#6272,#6273); +#6272 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#6273 = VECTOR('',#6274,1.); +#6274 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6275 = ORIENTED_EDGE('',*,*,#3839,.T.); +#6276 = ORIENTED_EDGE('',*,*,#3824,.F.); +#6277 = ORIENTED_EDGE('',*,*,#3903,.F.); +#6278 = PLANE('',#6279); +#6279 = AXIS2_PLACEMENT_3D('',#6280,#6281,#6282); +#6280 = CARTESIAN_POINT('',(-0.1,-0.3,-2.1)); +#6281 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6282 = DIRECTION('',(0.,0.,1.)); +#6283 = ADVANCED_FACE('',(#6284),#6295,.T.); +#6284 = FACE_BOUND('',#6285,.T.); +#6285 = EDGE_LOOP('',(#6286,#6292,#6293,#6294)); +#6286 = ORIENTED_EDGE('',*,*,#6287,.T.); +#6287 = EDGE_CURVE('',#3929,#3865,#6288,.T.); +#6288 = LINE('',#6289,#6290); +#6289 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#6290 = VECTOR('',#6291,1.); +#6291 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6292 = ORIENTED_EDGE('',*,*,#3872,.T.); +#6293 = ORIENTED_EDGE('',*,*,#6270,.F.); +#6294 = ORIENTED_EDGE('',*,*,#3936,.F.); +#6295 = PLANE('',#6296); +#6296 = AXIS2_PLACEMENT_3D('',#6297,#6298,#6299); +#6297 = CARTESIAN_POINT('',(-0.1,-0.15,-2.7)); +#6298 = DIRECTION('',(-1.077074540829E-16,-0.970142500145, + -0.242535625036)); +#6299 = DIRECTION('',(-2.692686352073E-17,-0.242535625036,0.970142500145 + )); +#6300 = ADVANCED_FACE('',(#6301),#6312,.T.); +#6301 = FACE_BOUND('',#6302,.T.); +#6302 = EDGE_LOOP('',(#6303,#6309,#6310,#6311)); +#6303 = ORIENTED_EDGE('',*,*,#6304,.T.); +#6304 = EDGE_CURVE('',#3921,#3857,#6305,.T.); +#6305 = LINE('',#6306,#6307); +#6306 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#6307 = VECTOR('',#6308,1.); +#6308 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6309 = ORIENTED_EDGE('',*,*,#3864,.T.); +#6310 = ORIENTED_EDGE('',*,*,#6287,.F.); +#6311 = ORIENTED_EDGE('',*,*,#3928,.T.); +#6312 = PLANE('',#6313); +#6313 = AXIS2_PLACEMENT_3D('',#6314,#6315,#6316); +#6314 = CARTESIAN_POINT('',(-0.1,0.15,-2.7)); +#6315 = DIRECTION('',(0.,-0.,-1.)); +#6316 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6317 = ADVANCED_FACE('',(#6318),#6329,.T.); +#6318 = FACE_BOUND('',#6319,.T.); +#6319 = EDGE_LOOP('',(#6320,#6326,#6327,#6328)); +#6320 = ORIENTED_EDGE('',*,*,#6321,.T.); +#6321 = EDGE_CURVE('',#3913,#3849,#6322,.T.); +#6322 = LINE('',#6323,#6324); +#6323 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#6324 = VECTOR('',#6325,1.); +#6325 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6326 = ORIENTED_EDGE('',*,*,#3856,.T.); +#6327 = ORIENTED_EDGE('',*,*,#6304,.F.); +#6328 = ORIENTED_EDGE('',*,*,#3920,.F.); +#6329 = PLANE('',#6330); +#6330 = AXIS2_PLACEMENT_3D('',#6331,#6332,#6333); +#6331 = CARTESIAN_POINT('',(-0.1,0.3,-2.1)); +#6332 = DIRECTION('',(1.077074540829E-16,0.970142500145,-0.242535625036) + ); +#6333 = DIRECTION('',(-2.692686352073E-17,-0.242535625036, + -0.970142500145)); +#6334 = ADVANCED_FACE('',(#6335),#6341,.T.); +#6335 = FACE_BOUND('',#6336,.T.); +#6336 = EDGE_LOOP('',(#6337,#6338,#6339,#6340)); +#6337 = ORIENTED_EDGE('',*,*,#3886,.T.); +#6338 = ORIENTED_EDGE('',*,*,#3848,.T.); +#6339 = ORIENTED_EDGE('',*,*,#6321,.F.); +#6340 = ORIENTED_EDGE('',*,*,#3912,.F.); +#6341 = PLANE('',#6342); +#6342 = AXIS2_PLACEMENT_3D('',#6343,#6344,#6345); +#6343 = CARTESIAN_POINT('',(-0.1,0.3,0.2)); +#6344 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6345 = DIRECTION('',(0.,0.,-1.)); +#6346 = ADVANCED_FACE('',(#6347),#6358,.T.); +#6347 = FACE_BOUND('',#6348,.T.); +#6348 = EDGE_LOOP('',(#6349,#6350,#6351,#6352)); +#6349 = ORIENTED_EDGE('',*,*,#4095,.T.); +#6350 = ORIENTED_EDGE('',*,*,#3958,.T.); +#6351 = ORIENTED_EDGE('',*,*,#3983,.T.); +#6352 = ORIENTED_EDGE('',*,*,#6353,.T.); +#6353 = EDGE_CURVE('',#3984,#4088,#6354,.T.); +#6354 = LINE('',#6355,#6356); +#6355 = CARTESIAN_POINT('',(0.1,-18.,0.9)); +#6356 = VECTOR('',#6357,1.); +#6357 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6358 = PLANE('',#6359); +#6359 = AXIS2_PLACEMENT_3D('',#6360,#6361,#6362); +#6360 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#6361 = DIRECTION('',(0.,0.,1.)); +#6362 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6363 = ADVANCED_FACE('',(#6364),#6375,.T.); +#6364 = FACE_BOUND('',#6365,.T.); +#6365 = EDGE_LOOP('',(#6366,#6367,#6373,#6374)); +#6366 = ORIENTED_EDGE('',*,*,#4063,.T.); +#6367 = ORIENTED_EDGE('',*,*,#6368,.F.); +#6368 = EDGE_CURVE('',#4008,#4064,#6369,.T.); +#6369 = LINE('',#6370,#6371); +#6370 = CARTESIAN_POINT('',(-0.1,-18.,0.9)); +#6371 = VECTOR('',#6372,1.); +#6372 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6373 = ORIENTED_EDGE('',*,*,#4015,.T.); +#6374 = ORIENTED_EDGE('',*,*,#4038,.T.); +#6375 = PLANE('',#6376); +#6376 = AXIS2_PLACEMENT_3D('',#6377,#6378,#6379); +#6377 = CARTESIAN_POINT('',(-1.97064586871E-15,-18.,0.9)); +#6378 = DIRECTION('',(0.,0.,1.)); +#6379 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6380 = ADVANCED_FACE('',(#6381),#6424,.T.); +#6381 = FACE_BOUND('',#6382,.T.); +#6382 = EDGE_LOOP('',(#6383,#6384,#6392,#6400,#6408,#6416,#6422,#6423)); +#6383 = ORIENTED_EDGE('',*,*,#4071,.F.); +#6384 = ORIENTED_EDGE('',*,*,#6385,.T.); +#6385 = EDGE_CURVE('',#4072,#6386,#6388,.T.); +#6386 = VERTEX_POINT('',#6387); +#6387 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#6388 = LINE('',#6389,#6390); +#6389 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#6390 = VECTOR('',#6391,1.); +#6391 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6392 = ORIENTED_EDGE('',*,*,#6393,.T.); +#6393 = EDGE_CURVE('',#6386,#6394,#6396,.T.); +#6394 = VERTEX_POINT('',#6395); +#6395 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#6396 = LINE('',#6397,#6398); +#6397 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#6398 = VECTOR('',#6399,1.); +#6399 = DIRECTION('',(0.,0.,-1.)); +#6400 = ORIENTED_EDGE('',*,*,#6401,.T.); +#6401 = EDGE_CURVE('',#6394,#6402,#6404,.T.); +#6402 = VERTEX_POINT('',#6403); +#6403 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#6404 = LINE('',#6405,#6406); +#6405 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#6406 = VECTOR('',#6407,1.); +#6407 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6408 = ORIENTED_EDGE('',*,*,#6409,.T.); +#6409 = EDGE_CURVE('',#6402,#6410,#6412,.T.); +#6410 = VERTEX_POINT('',#6411); +#6411 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#6412 = LINE('',#6413,#6414); +#6413 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#6414 = VECTOR('',#6415,1.); +#6415 = DIRECTION('',(0.,0.,1.)); +#6416 = ORIENTED_EDGE('',*,*,#6417,.T.); +#6417 = EDGE_CURVE('',#6410,#4000,#6418,.T.); +#6418 = LINE('',#6419,#6420); +#6419 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#6420 = VECTOR('',#6421,1.); +#6421 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6422 = ORIENTED_EDGE('',*,*,#4007,.F.); +#6423 = ORIENTED_EDGE('',*,*,#6368,.T.); +#6424 = PLANE('',#6425); +#6425 = AXIS2_PLACEMENT_3D('',#6426,#6427,#6428); +#6426 = CARTESIAN_POINT('',(-0.1,-18.,2.448597401424)); +#6427 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6428 = DIRECTION('',(0.,0.,1.)); +#6429 = ADVANCED_FACE('',(#6430),#6448,.T.); +#6430 = FACE_BOUND('',#6431,.T.); +#6431 = EDGE_LOOP('',(#6432,#6440,#6446,#6447)); +#6432 = ORIENTED_EDGE('',*,*,#6433,.T.); +#6433 = EDGE_CURVE('',#6410,#6434,#6436,.T.); +#6434 = VERTEX_POINT('',#6435); +#6435 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#6436 = LINE('',#6437,#6438); +#6437 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#6438 = VECTOR('',#6439,1.); +#6439 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6440 = ORIENTED_EDGE('',*,*,#6441,.T.); +#6441 = EDGE_CURVE('',#6434,#3992,#6442,.T.); +#6442 = LINE('',#6443,#6444); +#6443 = CARTESIAN_POINT('',(0.1,-17.75,4.45)); +#6444 = VECTOR('',#6445,1.); +#6445 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6446 = ORIENTED_EDGE('',*,*,#3999,.F.); +#6447 = ORIENTED_EDGE('',*,*,#6417,.F.); +#6448 = PLANE('',#6449); +#6449 = AXIS2_PLACEMENT_3D('',#6450,#6451,#6452); +#6450 = CARTESIAN_POINT('',(-0.1,-17.75,4.45)); +#6451 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#6452 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6453 = ADVANCED_FACE('',(#6454),#6490,.F.); +#6454 = FACE_BOUND('',#6455,.F.); +#6455 = EDGE_LOOP('',(#6456,#6457,#6465,#6473,#6481,#6487,#6488,#6489)); +#6456 = ORIENTED_EDGE('',*,*,#4087,.F.); +#6457 = ORIENTED_EDGE('',*,*,#6458,.T.); +#6458 = EDGE_CURVE('',#4080,#6459,#6461,.T.); +#6459 = VERTEX_POINT('',#6460); +#6460 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#6461 = LINE('',#6462,#6463); +#6462 = CARTESIAN_POINT('',(0.1,-18.3,4.5)); +#6463 = VECTOR('',#6464,1.); +#6464 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6465 = ORIENTED_EDGE('',*,*,#6466,.T.); +#6466 = EDGE_CURVE('',#6459,#6467,#6469,.T.); +#6467 = VERTEX_POINT('',#6468); +#6468 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#6469 = LINE('',#6470,#6471); +#6470 = CARTESIAN_POINT('',(0.1,-18.25,4.45)); +#6471 = VECTOR('',#6472,1.); +#6472 = DIRECTION('',(0.,0.,-1.)); +#6473 = ORIENTED_EDGE('',*,*,#6474,.T.); +#6474 = EDGE_CURVE('',#6467,#6475,#6477,.T.); +#6475 = VERTEX_POINT('',#6476); +#6476 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#6477 = LINE('',#6478,#6479); +#6478 = CARTESIAN_POINT('',(0.1,-18.25,1.25)); +#6479 = VECTOR('',#6480,1.); +#6480 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6481 = ORIENTED_EDGE('',*,*,#6482,.T.); +#6482 = EDGE_CURVE('',#6475,#6434,#6483,.T.); +#6483 = LINE('',#6484,#6485); +#6484 = CARTESIAN_POINT('',(0.1,-17.75,1.25)); +#6485 = VECTOR('',#6486,1.); +#6486 = DIRECTION('',(0.,0.,1.)); +#6487 = ORIENTED_EDGE('',*,*,#6441,.T.); +#6488 = ORIENTED_EDGE('',*,*,#3991,.F.); +#6489 = ORIENTED_EDGE('',*,*,#6353,.T.); +#6490 = PLANE('',#6491); +#6491 = AXIS2_PLACEMENT_3D('',#6492,#6493,#6494); +#6492 = CARTESIAN_POINT('',(0.1,-18.,2.448597401424)); +#6493 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6494 = DIRECTION('',(0.,0.,1.)); +#6495 = ADVANCED_FACE('',(#6496),#6507,.T.); +#6496 = FACE_BOUND('',#6497,.T.); +#6497 = EDGE_LOOP('',(#6498,#6499,#6500,#6506)); +#6498 = ORIENTED_EDGE('',*,*,#4079,.T.); +#6499 = ORIENTED_EDGE('',*,*,#6458,.T.); +#6500 = ORIENTED_EDGE('',*,*,#6501,.F.); +#6501 = EDGE_CURVE('',#6386,#6459,#6502,.T.); +#6502 = LINE('',#6503,#6504); +#6503 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#6504 = VECTOR('',#6505,1.); +#6505 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6506 = ORIENTED_EDGE('',*,*,#6385,.F.); +#6507 = PLANE('',#6508); +#6508 = AXIS2_PLACEMENT_3D('',#6509,#6510,#6511); +#6509 = CARTESIAN_POINT('',(-0.1,-18.3,4.5)); +#6510 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6511 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6512 = ADVANCED_FACE('',(#6513),#6524,.T.); +#6513 = FACE_BOUND('',#6514,.T.); +#6514 = EDGE_LOOP('',(#6515,#6516,#6517,#6518)); +#6515 = ORIENTED_EDGE('',*,*,#4255,.T.); +#6516 = ORIENTED_EDGE('',*,*,#4118,.T.); +#6517 = ORIENTED_EDGE('',*,*,#4143,.T.); +#6518 = ORIENTED_EDGE('',*,*,#6519,.T.); +#6519 = EDGE_CURVE('',#4144,#4248,#6520,.T.); +#6520 = LINE('',#6521,#6522); +#6521 = CARTESIAN_POINT('',(0.1,-16.,0.9)); +#6522 = VECTOR('',#6523,1.); +#6523 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6524 = PLANE('',#6525); +#6525 = AXIS2_PLACEMENT_3D('',#6526,#6527,#6528); +#6526 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#6527 = DIRECTION('',(0.,0.,1.)); +#6528 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6529 = ADVANCED_FACE('',(#6530),#6541,.T.); +#6530 = FACE_BOUND('',#6531,.T.); +#6531 = EDGE_LOOP('',(#6532,#6533,#6539,#6540)); +#6532 = ORIENTED_EDGE('',*,*,#4223,.T.); +#6533 = ORIENTED_EDGE('',*,*,#6534,.F.); +#6534 = EDGE_CURVE('',#4168,#4224,#6535,.T.); +#6535 = LINE('',#6536,#6537); +#6536 = CARTESIAN_POINT('',(-0.1,-16.,0.9)); +#6537 = VECTOR('',#6538,1.); +#6538 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6539 = ORIENTED_EDGE('',*,*,#4175,.T.); +#6540 = ORIENTED_EDGE('',*,*,#4198,.T.); +#6541 = PLANE('',#6542); +#6542 = AXIS2_PLACEMENT_3D('',#6543,#6544,#6545); +#6543 = CARTESIAN_POINT('',(-1.748601263785E-15,-16.,0.9)); +#6544 = DIRECTION('',(0.,0.,1.)); +#6545 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6546 = ADVANCED_FACE('',(#6547),#6590,.T.); +#6547 = FACE_BOUND('',#6548,.T.); +#6548 = EDGE_LOOP('',(#6549,#6550,#6558,#6566,#6574,#6582,#6588,#6589)); +#6549 = ORIENTED_EDGE('',*,*,#4231,.F.); +#6550 = ORIENTED_EDGE('',*,*,#6551,.T.); +#6551 = EDGE_CURVE('',#4232,#6552,#6554,.T.); +#6552 = VERTEX_POINT('',#6553); +#6553 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#6554 = LINE('',#6555,#6556); +#6555 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#6556 = VECTOR('',#6557,1.); +#6557 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6558 = ORIENTED_EDGE('',*,*,#6559,.T.); +#6559 = EDGE_CURVE('',#6552,#6560,#6562,.T.); +#6560 = VERTEX_POINT('',#6561); +#6561 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#6562 = LINE('',#6563,#6564); +#6563 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#6564 = VECTOR('',#6565,1.); +#6565 = DIRECTION('',(0.,0.,-1.)); +#6566 = ORIENTED_EDGE('',*,*,#6567,.T.); +#6567 = EDGE_CURVE('',#6560,#6568,#6570,.T.); +#6568 = VERTEX_POINT('',#6569); +#6569 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#6570 = LINE('',#6571,#6572); +#6571 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#6572 = VECTOR('',#6573,1.); +#6573 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6574 = ORIENTED_EDGE('',*,*,#6575,.T.); +#6575 = EDGE_CURVE('',#6568,#6576,#6578,.T.); +#6576 = VERTEX_POINT('',#6577); +#6577 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#6578 = LINE('',#6579,#6580); +#6579 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#6580 = VECTOR('',#6581,1.); +#6581 = DIRECTION('',(0.,0.,1.)); +#6582 = ORIENTED_EDGE('',*,*,#6583,.T.); +#6583 = EDGE_CURVE('',#6576,#4160,#6584,.T.); +#6584 = LINE('',#6585,#6586); +#6585 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#6586 = VECTOR('',#6587,1.); +#6587 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6588 = ORIENTED_EDGE('',*,*,#4167,.F.); +#6589 = ORIENTED_EDGE('',*,*,#6534,.T.); +#6590 = PLANE('',#6591); +#6591 = AXIS2_PLACEMENT_3D('',#6592,#6593,#6594); +#6592 = CARTESIAN_POINT('',(-0.1,-16.,2.448597401424)); +#6593 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6594 = DIRECTION('',(0.,0.,1.)); +#6595 = ADVANCED_FACE('',(#6596),#6614,.T.); +#6596 = FACE_BOUND('',#6597,.T.); +#6597 = EDGE_LOOP('',(#6598,#6606,#6612,#6613)); +#6598 = ORIENTED_EDGE('',*,*,#6599,.T.); +#6599 = EDGE_CURVE('',#6576,#6600,#6602,.T.); +#6600 = VERTEX_POINT('',#6601); +#6601 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#6602 = LINE('',#6603,#6604); +#6603 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#6604 = VECTOR('',#6605,1.); +#6605 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6606 = ORIENTED_EDGE('',*,*,#6607,.T.); +#6607 = EDGE_CURVE('',#6600,#4152,#6608,.T.); +#6608 = LINE('',#6609,#6610); +#6609 = CARTESIAN_POINT('',(0.1,-15.75,4.45)); +#6610 = VECTOR('',#6611,1.); +#6611 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6612 = ORIENTED_EDGE('',*,*,#4159,.F.); +#6613 = ORIENTED_EDGE('',*,*,#6583,.F.); +#6614 = PLANE('',#6615); +#6615 = AXIS2_PLACEMENT_3D('',#6616,#6617,#6618); +#6616 = CARTESIAN_POINT('',(-0.1,-15.75,4.45)); +#6617 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#6618 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6619 = ADVANCED_FACE('',(#6620),#6656,.F.); +#6620 = FACE_BOUND('',#6621,.F.); +#6621 = EDGE_LOOP('',(#6622,#6623,#6631,#6639,#6647,#6653,#6654,#6655)); +#6622 = ORIENTED_EDGE('',*,*,#4247,.F.); +#6623 = ORIENTED_EDGE('',*,*,#6624,.T.); +#6624 = EDGE_CURVE('',#4240,#6625,#6627,.T.); +#6625 = VERTEX_POINT('',#6626); +#6626 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#6627 = LINE('',#6628,#6629); +#6628 = CARTESIAN_POINT('',(0.1,-16.3,4.5)); +#6629 = VECTOR('',#6630,1.); +#6630 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6631 = ORIENTED_EDGE('',*,*,#6632,.T.); +#6632 = EDGE_CURVE('',#6625,#6633,#6635,.T.); +#6633 = VERTEX_POINT('',#6634); +#6634 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#6635 = LINE('',#6636,#6637); +#6636 = CARTESIAN_POINT('',(0.1,-16.25,4.45)); +#6637 = VECTOR('',#6638,1.); +#6638 = DIRECTION('',(0.,0.,-1.)); +#6639 = ORIENTED_EDGE('',*,*,#6640,.T.); +#6640 = EDGE_CURVE('',#6633,#6641,#6643,.T.); +#6641 = VERTEX_POINT('',#6642); +#6642 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#6643 = LINE('',#6644,#6645); +#6644 = CARTESIAN_POINT('',(0.1,-16.25,1.25)); +#6645 = VECTOR('',#6646,1.); +#6646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6647 = ORIENTED_EDGE('',*,*,#6648,.T.); +#6648 = EDGE_CURVE('',#6641,#6600,#6649,.T.); +#6649 = LINE('',#6650,#6651); +#6650 = CARTESIAN_POINT('',(0.1,-15.75,1.25)); +#6651 = VECTOR('',#6652,1.); +#6652 = DIRECTION('',(0.,0.,1.)); +#6653 = ORIENTED_EDGE('',*,*,#6607,.T.); +#6654 = ORIENTED_EDGE('',*,*,#4151,.F.); +#6655 = ORIENTED_EDGE('',*,*,#6519,.T.); +#6656 = PLANE('',#6657); +#6657 = AXIS2_PLACEMENT_3D('',#6658,#6659,#6660); +#6658 = CARTESIAN_POINT('',(0.1,-16.,2.448597401424)); +#6659 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6660 = DIRECTION('',(0.,0.,1.)); +#6661 = ADVANCED_FACE('',(#6662),#6673,.T.); +#6662 = FACE_BOUND('',#6663,.T.); +#6663 = EDGE_LOOP('',(#6664,#6665,#6666,#6672)); +#6664 = ORIENTED_EDGE('',*,*,#4239,.T.); +#6665 = ORIENTED_EDGE('',*,*,#6624,.T.); +#6666 = ORIENTED_EDGE('',*,*,#6667,.F.); +#6667 = EDGE_CURVE('',#6552,#6625,#6668,.T.); +#6668 = LINE('',#6669,#6670); +#6669 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#6670 = VECTOR('',#6671,1.); +#6671 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6672 = ORIENTED_EDGE('',*,*,#6551,.F.); +#6673 = PLANE('',#6674); +#6674 = AXIS2_PLACEMENT_3D('',#6675,#6676,#6677); +#6675 = CARTESIAN_POINT('',(-0.1,-16.3,4.5)); +#6676 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6677 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6678 = ADVANCED_FACE('',(#6679),#6690,.T.); +#6679 = FACE_BOUND('',#6680,.T.); +#6680 = EDGE_LOOP('',(#6681,#6682,#6683,#6684)); +#6681 = ORIENTED_EDGE('',*,*,#4415,.T.); +#6682 = ORIENTED_EDGE('',*,*,#4278,.T.); +#6683 = ORIENTED_EDGE('',*,*,#4303,.T.); +#6684 = ORIENTED_EDGE('',*,*,#6685,.T.); +#6685 = EDGE_CURVE('',#4304,#4408,#6686,.T.); +#6686 = LINE('',#6687,#6688); +#6687 = CARTESIAN_POINT('',(0.1,-14.,0.9)); +#6688 = VECTOR('',#6689,1.); +#6689 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6690 = PLANE('',#6691); +#6691 = AXIS2_PLACEMENT_3D('',#6692,#6693,#6694); +#6692 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#6693 = DIRECTION('',(0.,0.,1.)); +#6694 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6695 = ADVANCED_FACE('',(#6696),#6707,.T.); +#6696 = FACE_BOUND('',#6697,.T.); +#6697 = EDGE_LOOP('',(#6698,#6699,#6705,#6706)); +#6698 = ORIENTED_EDGE('',*,*,#4383,.T.); +#6699 = ORIENTED_EDGE('',*,*,#6700,.F.); +#6700 = EDGE_CURVE('',#4328,#4384,#6701,.T.); +#6701 = LINE('',#6702,#6703); +#6702 = CARTESIAN_POINT('',(-0.1,-14.,0.9)); +#6703 = VECTOR('',#6704,1.); +#6704 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6705 = ORIENTED_EDGE('',*,*,#4335,.T.); +#6706 = ORIENTED_EDGE('',*,*,#4358,.T.); +#6707 = PLANE('',#6708); +#6708 = AXIS2_PLACEMENT_3D('',#6709,#6710,#6711); +#6709 = CARTESIAN_POINT('',(-1.52655665886E-15,-14.,0.9)); +#6710 = DIRECTION('',(0.,0.,1.)); +#6711 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6712 = ADVANCED_FACE('',(#6713),#6756,.T.); +#6713 = FACE_BOUND('',#6714,.T.); +#6714 = EDGE_LOOP('',(#6715,#6716,#6724,#6732,#6740,#6748,#6754,#6755)); +#6715 = ORIENTED_EDGE('',*,*,#4391,.F.); +#6716 = ORIENTED_EDGE('',*,*,#6717,.T.); +#6717 = EDGE_CURVE('',#4392,#6718,#6720,.T.); +#6718 = VERTEX_POINT('',#6719); +#6719 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#6720 = LINE('',#6721,#6722); +#6721 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#6722 = VECTOR('',#6723,1.); +#6723 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6724 = ORIENTED_EDGE('',*,*,#6725,.T.); +#6725 = EDGE_CURVE('',#6718,#6726,#6728,.T.); +#6726 = VERTEX_POINT('',#6727); +#6727 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#6728 = LINE('',#6729,#6730); +#6729 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#6730 = VECTOR('',#6731,1.); +#6731 = DIRECTION('',(0.,0.,-1.)); +#6732 = ORIENTED_EDGE('',*,*,#6733,.T.); +#6733 = EDGE_CURVE('',#6726,#6734,#6736,.T.); +#6734 = VERTEX_POINT('',#6735); +#6735 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#6736 = LINE('',#6737,#6738); +#6737 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#6738 = VECTOR('',#6739,1.); +#6739 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6740 = ORIENTED_EDGE('',*,*,#6741,.T.); +#6741 = EDGE_CURVE('',#6734,#6742,#6744,.T.); +#6742 = VERTEX_POINT('',#6743); +#6743 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#6744 = LINE('',#6745,#6746); +#6745 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#6746 = VECTOR('',#6747,1.); +#6747 = DIRECTION('',(0.,0.,1.)); +#6748 = ORIENTED_EDGE('',*,*,#6749,.T.); +#6749 = EDGE_CURVE('',#6742,#4320,#6750,.T.); +#6750 = LINE('',#6751,#6752); +#6751 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#6752 = VECTOR('',#6753,1.); +#6753 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6754 = ORIENTED_EDGE('',*,*,#4327,.F.); +#6755 = ORIENTED_EDGE('',*,*,#6700,.T.); +#6756 = PLANE('',#6757); +#6757 = AXIS2_PLACEMENT_3D('',#6758,#6759,#6760); +#6758 = CARTESIAN_POINT('',(-0.1,-14.,2.448597401424)); +#6759 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6760 = DIRECTION('',(0.,0.,1.)); +#6761 = ADVANCED_FACE('',(#6762),#6780,.T.); +#6762 = FACE_BOUND('',#6763,.T.); +#6763 = EDGE_LOOP('',(#6764,#6772,#6778,#6779)); +#6764 = ORIENTED_EDGE('',*,*,#6765,.T.); +#6765 = EDGE_CURVE('',#6742,#6766,#6768,.T.); +#6766 = VERTEX_POINT('',#6767); +#6767 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#6768 = LINE('',#6769,#6770); +#6769 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#6770 = VECTOR('',#6771,1.); +#6771 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6772 = ORIENTED_EDGE('',*,*,#6773,.T.); +#6773 = EDGE_CURVE('',#6766,#4312,#6774,.T.); +#6774 = LINE('',#6775,#6776); +#6775 = CARTESIAN_POINT('',(0.1,-13.75,4.45)); +#6776 = VECTOR('',#6777,1.); +#6777 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6778 = ORIENTED_EDGE('',*,*,#4319,.F.); +#6779 = ORIENTED_EDGE('',*,*,#6749,.F.); +#6780 = PLANE('',#6781); +#6781 = AXIS2_PLACEMENT_3D('',#6782,#6783,#6784); +#6782 = CARTESIAN_POINT('',(-0.1,-13.75,4.45)); +#6783 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#6784 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6785 = ADVANCED_FACE('',(#6786),#6822,.F.); +#6786 = FACE_BOUND('',#6787,.F.); +#6787 = EDGE_LOOP('',(#6788,#6789,#6797,#6805,#6813,#6819,#6820,#6821)); +#6788 = ORIENTED_EDGE('',*,*,#4407,.F.); +#6789 = ORIENTED_EDGE('',*,*,#6790,.T.); +#6790 = EDGE_CURVE('',#4400,#6791,#6793,.T.); +#6791 = VERTEX_POINT('',#6792); +#6792 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#6793 = LINE('',#6794,#6795); +#6794 = CARTESIAN_POINT('',(0.1,-14.3,4.5)); +#6795 = VECTOR('',#6796,1.); +#6796 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6797 = ORIENTED_EDGE('',*,*,#6798,.T.); +#6798 = EDGE_CURVE('',#6791,#6799,#6801,.T.); +#6799 = VERTEX_POINT('',#6800); +#6800 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#6801 = LINE('',#6802,#6803); +#6802 = CARTESIAN_POINT('',(0.1,-14.25,4.45)); +#6803 = VECTOR('',#6804,1.); +#6804 = DIRECTION('',(0.,0.,-1.)); +#6805 = ORIENTED_EDGE('',*,*,#6806,.T.); +#6806 = EDGE_CURVE('',#6799,#6807,#6809,.T.); +#6807 = VERTEX_POINT('',#6808); +#6808 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#6809 = LINE('',#6810,#6811); +#6810 = CARTESIAN_POINT('',(0.1,-14.25,1.25)); +#6811 = VECTOR('',#6812,1.); +#6812 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6813 = ORIENTED_EDGE('',*,*,#6814,.T.); +#6814 = EDGE_CURVE('',#6807,#6766,#6815,.T.); +#6815 = LINE('',#6816,#6817); +#6816 = CARTESIAN_POINT('',(0.1,-13.75,1.25)); +#6817 = VECTOR('',#6818,1.); +#6818 = DIRECTION('',(0.,0.,1.)); +#6819 = ORIENTED_EDGE('',*,*,#6773,.T.); +#6820 = ORIENTED_EDGE('',*,*,#4311,.F.); +#6821 = ORIENTED_EDGE('',*,*,#6685,.T.); +#6822 = PLANE('',#6823); +#6823 = AXIS2_PLACEMENT_3D('',#6824,#6825,#6826); +#6824 = CARTESIAN_POINT('',(0.1,-14.,2.448597401424)); +#6825 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6826 = DIRECTION('',(0.,0.,1.)); +#6827 = ADVANCED_FACE('',(#6828),#6839,.T.); +#6828 = FACE_BOUND('',#6829,.T.); +#6829 = EDGE_LOOP('',(#6830,#6831,#6832,#6838)); +#6830 = ORIENTED_EDGE('',*,*,#4399,.T.); +#6831 = ORIENTED_EDGE('',*,*,#6790,.T.); +#6832 = ORIENTED_EDGE('',*,*,#6833,.F.); +#6833 = EDGE_CURVE('',#6718,#6791,#6834,.T.); +#6834 = LINE('',#6835,#6836); +#6835 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#6836 = VECTOR('',#6837,1.); +#6837 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6838 = ORIENTED_EDGE('',*,*,#6717,.F.); +#6839 = PLANE('',#6840); +#6840 = AXIS2_PLACEMENT_3D('',#6841,#6842,#6843); +#6841 = CARTESIAN_POINT('',(-0.1,-14.3,4.5)); +#6842 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6843 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6844 = ADVANCED_FACE('',(#6845),#6856,.T.); +#6845 = FACE_BOUND('',#6846,.T.); +#6846 = EDGE_LOOP('',(#6847,#6848,#6849,#6850)); +#6847 = ORIENTED_EDGE('',*,*,#4575,.T.); +#6848 = ORIENTED_EDGE('',*,*,#4438,.T.); +#6849 = ORIENTED_EDGE('',*,*,#4463,.T.); +#6850 = ORIENTED_EDGE('',*,*,#6851,.T.); +#6851 = EDGE_CURVE('',#4464,#4568,#6852,.T.); +#6852 = LINE('',#6853,#6854); +#6853 = CARTESIAN_POINT('',(0.1,-12.,0.9)); +#6854 = VECTOR('',#6855,1.); +#6855 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6856 = PLANE('',#6857); +#6857 = AXIS2_PLACEMENT_3D('',#6858,#6859,#6860); +#6858 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#6859 = DIRECTION('',(0.,0.,1.)); +#6860 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6861 = ADVANCED_FACE('',(#6862),#6873,.T.); +#6862 = FACE_BOUND('',#6863,.T.); +#6863 = EDGE_LOOP('',(#6864,#6865,#6871,#6872)); +#6864 = ORIENTED_EDGE('',*,*,#4543,.T.); +#6865 = ORIENTED_EDGE('',*,*,#6866,.F.); +#6866 = EDGE_CURVE('',#4488,#4544,#6867,.T.); +#6867 = LINE('',#6868,#6869); +#6868 = CARTESIAN_POINT('',(-0.1,-12.,0.9)); +#6869 = VECTOR('',#6870,1.); +#6870 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#6871 = ORIENTED_EDGE('',*,*,#4495,.T.); +#6872 = ORIENTED_EDGE('',*,*,#4518,.T.); +#6873 = PLANE('',#6874); +#6874 = AXIS2_PLACEMENT_3D('',#6875,#6876,#6877); +#6875 = CARTESIAN_POINT('',(-1.304512053935E-15,-12.,0.9)); +#6876 = DIRECTION('',(0.,0.,1.)); +#6877 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#6878 = ADVANCED_FACE('',(#6879),#6922,.T.); +#6879 = FACE_BOUND('',#6880,.T.); +#6880 = EDGE_LOOP('',(#6881,#6882,#6890,#6898,#6906,#6914,#6920,#6921)); +#6881 = ORIENTED_EDGE('',*,*,#4551,.F.); +#6882 = ORIENTED_EDGE('',*,*,#6883,.T.); +#6883 = EDGE_CURVE('',#4552,#6884,#6886,.T.); +#6884 = VERTEX_POINT('',#6885); +#6885 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#6886 = LINE('',#6887,#6888); +#6887 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#6888 = VECTOR('',#6889,1.); +#6889 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6890 = ORIENTED_EDGE('',*,*,#6891,.T.); +#6891 = EDGE_CURVE('',#6884,#6892,#6894,.T.); +#6892 = VERTEX_POINT('',#6893); +#6893 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#6894 = LINE('',#6895,#6896); +#6895 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#6896 = VECTOR('',#6897,1.); +#6897 = DIRECTION('',(0.,0.,-1.)); +#6898 = ORIENTED_EDGE('',*,*,#6899,.T.); +#6899 = EDGE_CURVE('',#6892,#6900,#6902,.T.); +#6900 = VERTEX_POINT('',#6901); +#6901 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#6902 = LINE('',#6903,#6904); +#6903 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#6904 = VECTOR('',#6905,1.); +#6905 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6906 = ORIENTED_EDGE('',*,*,#6907,.T.); +#6907 = EDGE_CURVE('',#6900,#6908,#6910,.T.); +#6908 = VERTEX_POINT('',#6909); +#6909 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#6910 = LINE('',#6911,#6912); +#6911 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#6912 = VECTOR('',#6913,1.); +#6913 = DIRECTION('',(0.,0.,1.)); +#6914 = ORIENTED_EDGE('',*,*,#6915,.T.); +#6915 = EDGE_CURVE('',#6908,#4480,#6916,.T.); +#6916 = LINE('',#6917,#6918); +#6917 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#6918 = VECTOR('',#6919,1.); +#6919 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6920 = ORIENTED_EDGE('',*,*,#4487,.F.); +#6921 = ORIENTED_EDGE('',*,*,#6866,.T.); +#6922 = PLANE('',#6923); +#6923 = AXIS2_PLACEMENT_3D('',#6924,#6925,#6926); +#6924 = CARTESIAN_POINT('',(-0.1,-12.,2.448597401424)); +#6925 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6926 = DIRECTION('',(0.,0.,1.)); +#6927 = ADVANCED_FACE('',(#6928),#6946,.T.); +#6928 = FACE_BOUND('',#6929,.T.); +#6929 = EDGE_LOOP('',(#6930,#6938,#6944,#6945)); +#6930 = ORIENTED_EDGE('',*,*,#6931,.T.); +#6931 = EDGE_CURVE('',#6908,#6932,#6934,.T.); +#6932 = VERTEX_POINT('',#6933); +#6933 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#6934 = LINE('',#6935,#6936); +#6935 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#6936 = VECTOR('',#6937,1.); +#6937 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#6938 = ORIENTED_EDGE('',*,*,#6939,.T.); +#6939 = EDGE_CURVE('',#6932,#4472,#6940,.T.); +#6940 = LINE('',#6941,#6942); +#6941 = CARTESIAN_POINT('',(0.1,-11.75,4.45)); +#6942 = VECTOR('',#6943,1.); +#6943 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6944 = ORIENTED_EDGE('',*,*,#4479,.F.); +#6945 = ORIENTED_EDGE('',*,*,#6915,.F.); +#6946 = PLANE('',#6947); +#6947 = AXIS2_PLACEMENT_3D('',#6948,#6949,#6950); +#6948 = CARTESIAN_POINT('',(-0.1,-11.75,4.45)); +#6949 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#6950 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#6951 = ADVANCED_FACE('',(#6952),#6988,.F.); +#6952 = FACE_BOUND('',#6953,.F.); +#6953 = EDGE_LOOP('',(#6954,#6955,#6963,#6971,#6979,#6985,#6986,#6987)); +#6954 = ORIENTED_EDGE('',*,*,#4567,.F.); +#6955 = ORIENTED_EDGE('',*,*,#6956,.T.); +#6956 = EDGE_CURVE('',#4560,#6957,#6959,.T.); +#6957 = VERTEX_POINT('',#6958); +#6958 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#6959 = LINE('',#6960,#6961); +#6960 = CARTESIAN_POINT('',(0.1,-12.3,4.5)); +#6961 = VECTOR('',#6962,1.); +#6962 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#6963 = ORIENTED_EDGE('',*,*,#6964,.T.); +#6964 = EDGE_CURVE('',#6957,#6965,#6967,.T.); +#6965 = VERTEX_POINT('',#6966); +#6966 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#6967 = LINE('',#6968,#6969); +#6968 = CARTESIAN_POINT('',(0.1,-12.25,4.45)); +#6969 = VECTOR('',#6970,1.); +#6970 = DIRECTION('',(0.,0.,-1.)); +#6971 = ORIENTED_EDGE('',*,*,#6972,.T.); +#6972 = EDGE_CURVE('',#6965,#6973,#6975,.T.); +#6973 = VERTEX_POINT('',#6974); +#6974 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#6975 = LINE('',#6976,#6977); +#6976 = CARTESIAN_POINT('',(0.1,-12.25,1.25)); +#6977 = VECTOR('',#6978,1.); +#6978 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#6979 = ORIENTED_EDGE('',*,*,#6980,.T.); +#6980 = EDGE_CURVE('',#6973,#6932,#6981,.T.); +#6981 = LINE('',#6982,#6983); +#6982 = CARTESIAN_POINT('',(0.1,-11.75,1.25)); +#6983 = VECTOR('',#6984,1.); +#6984 = DIRECTION('',(0.,0.,1.)); +#6985 = ORIENTED_EDGE('',*,*,#6939,.T.); +#6986 = ORIENTED_EDGE('',*,*,#4471,.F.); +#6987 = ORIENTED_EDGE('',*,*,#6851,.T.); +#6988 = PLANE('',#6989); +#6989 = AXIS2_PLACEMENT_3D('',#6990,#6991,#6992); +#6990 = CARTESIAN_POINT('',(0.1,-12.,2.448597401424)); +#6991 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#6992 = DIRECTION('',(0.,0.,1.)); +#6993 = ADVANCED_FACE('',(#6994),#7005,.T.); +#6994 = FACE_BOUND('',#6995,.T.); +#6995 = EDGE_LOOP('',(#6996,#6997,#6998,#7004)); +#6996 = ORIENTED_EDGE('',*,*,#4559,.T.); +#6997 = ORIENTED_EDGE('',*,*,#6956,.T.); +#6998 = ORIENTED_EDGE('',*,*,#6999,.F.); +#6999 = EDGE_CURVE('',#6884,#6957,#7000,.T.); +#7000 = LINE('',#7001,#7002); +#7001 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#7002 = VECTOR('',#7003,1.); +#7003 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7004 = ORIENTED_EDGE('',*,*,#6883,.F.); +#7005 = PLANE('',#7006); +#7006 = AXIS2_PLACEMENT_3D('',#7007,#7008,#7009); +#7007 = CARTESIAN_POINT('',(-0.1,-12.3,4.5)); +#7008 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7009 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7010 = ADVANCED_FACE('',(#7011),#7022,.T.); +#7011 = FACE_BOUND('',#7012,.T.); +#7012 = EDGE_LOOP('',(#7013,#7014,#7015,#7016)); +#7013 = ORIENTED_EDGE('',*,*,#4735,.T.); +#7014 = ORIENTED_EDGE('',*,*,#4598,.T.); +#7015 = ORIENTED_EDGE('',*,*,#4623,.T.); +#7016 = ORIENTED_EDGE('',*,*,#7017,.T.); +#7017 = EDGE_CURVE('',#4624,#4728,#7018,.T.); +#7018 = LINE('',#7019,#7020); +#7019 = CARTESIAN_POINT('',(0.1,-10.,0.9)); +#7020 = VECTOR('',#7021,1.); +#7021 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7022 = PLANE('',#7023); +#7023 = AXIS2_PLACEMENT_3D('',#7024,#7025,#7026); +#7024 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#7025 = DIRECTION('',(0.,0.,1.)); +#7026 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7027 = ADVANCED_FACE('',(#7028),#7039,.T.); +#7028 = FACE_BOUND('',#7029,.T.); +#7029 = EDGE_LOOP('',(#7030,#7031,#7037,#7038)); +#7030 = ORIENTED_EDGE('',*,*,#4703,.T.); +#7031 = ORIENTED_EDGE('',*,*,#7032,.F.); +#7032 = EDGE_CURVE('',#4648,#4704,#7033,.T.); +#7033 = LINE('',#7034,#7035); +#7034 = CARTESIAN_POINT('',(-0.1,-10.,0.9)); +#7035 = VECTOR('',#7036,1.); +#7036 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7037 = ORIENTED_EDGE('',*,*,#4655,.T.); +#7038 = ORIENTED_EDGE('',*,*,#4678,.T.); +#7039 = PLANE('',#7040); +#7040 = AXIS2_PLACEMENT_3D('',#7041,#7042,#7043); +#7041 = CARTESIAN_POINT('',(-1.08246744901E-15,-10.,0.9)); +#7042 = DIRECTION('',(0.,0.,1.)); +#7043 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7044 = ADVANCED_FACE('',(#7045),#7088,.T.); +#7045 = FACE_BOUND('',#7046,.T.); +#7046 = EDGE_LOOP('',(#7047,#7048,#7056,#7064,#7072,#7080,#7086,#7087)); +#7047 = ORIENTED_EDGE('',*,*,#4711,.F.); +#7048 = ORIENTED_EDGE('',*,*,#7049,.T.); +#7049 = EDGE_CURVE('',#4712,#7050,#7052,.T.); +#7050 = VERTEX_POINT('',#7051); +#7051 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#7052 = LINE('',#7053,#7054); +#7053 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#7054 = VECTOR('',#7055,1.); +#7055 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7056 = ORIENTED_EDGE('',*,*,#7057,.T.); +#7057 = EDGE_CURVE('',#7050,#7058,#7060,.T.); +#7058 = VERTEX_POINT('',#7059); +#7059 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#7060 = LINE('',#7061,#7062); +#7061 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#7062 = VECTOR('',#7063,1.); +#7063 = DIRECTION('',(0.,0.,-1.)); +#7064 = ORIENTED_EDGE('',*,*,#7065,.T.); +#7065 = EDGE_CURVE('',#7058,#7066,#7068,.T.); +#7066 = VERTEX_POINT('',#7067); +#7067 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#7068 = LINE('',#7069,#7070); +#7069 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#7070 = VECTOR('',#7071,1.); +#7071 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7072 = ORIENTED_EDGE('',*,*,#7073,.T.); +#7073 = EDGE_CURVE('',#7066,#7074,#7076,.T.); +#7074 = VERTEX_POINT('',#7075); +#7075 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#7076 = LINE('',#7077,#7078); +#7077 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#7078 = VECTOR('',#7079,1.); +#7079 = DIRECTION('',(0.,0.,1.)); +#7080 = ORIENTED_EDGE('',*,*,#7081,.T.); +#7081 = EDGE_CURVE('',#7074,#4640,#7082,.T.); +#7082 = LINE('',#7083,#7084); +#7083 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#7084 = VECTOR('',#7085,1.); +#7085 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7086 = ORIENTED_EDGE('',*,*,#4647,.F.); +#7087 = ORIENTED_EDGE('',*,*,#7032,.T.); +#7088 = PLANE('',#7089); +#7089 = AXIS2_PLACEMENT_3D('',#7090,#7091,#7092); +#7090 = CARTESIAN_POINT('',(-0.1,-10.,2.448597401424)); +#7091 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7092 = DIRECTION('',(0.,0.,1.)); +#7093 = ADVANCED_FACE('',(#7094),#7112,.T.); +#7094 = FACE_BOUND('',#7095,.T.); +#7095 = EDGE_LOOP('',(#7096,#7104,#7110,#7111)); +#7096 = ORIENTED_EDGE('',*,*,#7097,.T.); +#7097 = EDGE_CURVE('',#7074,#7098,#7100,.T.); +#7098 = VERTEX_POINT('',#7099); +#7099 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#7100 = LINE('',#7101,#7102); +#7101 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#7102 = VECTOR('',#7103,1.); +#7103 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7104 = ORIENTED_EDGE('',*,*,#7105,.T.); +#7105 = EDGE_CURVE('',#7098,#4632,#7106,.T.); +#7106 = LINE('',#7107,#7108); +#7107 = CARTESIAN_POINT('',(0.1,-9.75,4.45)); +#7108 = VECTOR('',#7109,1.); +#7109 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7110 = ORIENTED_EDGE('',*,*,#4639,.F.); +#7111 = ORIENTED_EDGE('',*,*,#7081,.F.); +#7112 = PLANE('',#7113); +#7113 = AXIS2_PLACEMENT_3D('',#7114,#7115,#7116); +#7114 = CARTESIAN_POINT('',(-0.1,-9.75,4.45)); +#7115 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7116 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7117 = ADVANCED_FACE('',(#7118),#7154,.F.); +#7118 = FACE_BOUND('',#7119,.F.); +#7119 = EDGE_LOOP('',(#7120,#7121,#7129,#7137,#7145,#7151,#7152,#7153)); +#7120 = ORIENTED_EDGE('',*,*,#4727,.F.); +#7121 = ORIENTED_EDGE('',*,*,#7122,.T.); +#7122 = EDGE_CURVE('',#4720,#7123,#7125,.T.); +#7123 = VERTEX_POINT('',#7124); +#7124 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#7125 = LINE('',#7126,#7127); +#7126 = CARTESIAN_POINT('',(0.1,-10.3,4.5)); +#7127 = VECTOR('',#7128,1.); +#7128 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7129 = ORIENTED_EDGE('',*,*,#7130,.T.); +#7130 = EDGE_CURVE('',#7123,#7131,#7133,.T.); +#7131 = VERTEX_POINT('',#7132); +#7132 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#7133 = LINE('',#7134,#7135); +#7134 = CARTESIAN_POINT('',(0.1,-10.25,4.45)); +#7135 = VECTOR('',#7136,1.); +#7136 = DIRECTION('',(0.,0.,-1.)); +#7137 = ORIENTED_EDGE('',*,*,#7138,.T.); +#7138 = EDGE_CURVE('',#7131,#7139,#7141,.T.); +#7139 = VERTEX_POINT('',#7140); +#7140 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#7141 = LINE('',#7142,#7143); +#7142 = CARTESIAN_POINT('',(0.1,-10.25,1.25)); +#7143 = VECTOR('',#7144,1.); +#7144 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7145 = ORIENTED_EDGE('',*,*,#7146,.T.); +#7146 = EDGE_CURVE('',#7139,#7098,#7147,.T.); +#7147 = LINE('',#7148,#7149); +#7148 = CARTESIAN_POINT('',(0.1,-9.75,1.25)); +#7149 = VECTOR('',#7150,1.); +#7150 = DIRECTION('',(0.,0.,1.)); +#7151 = ORIENTED_EDGE('',*,*,#7105,.T.); +#7152 = ORIENTED_EDGE('',*,*,#4631,.F.); +#7153 = ORIENTED_EDGE('',*,*,#7017,.T.); +#7154 = PLANE('',#7155); +#7155 = AXIS2_PLACEMENT_3D('',#7156,#7157,#7158); +#7156 = CARTESIAN_POINT('',(0.1,-10.,2.448597401424)); +#7157 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7158 = DIRECTION('',(0.,0.,1.)); +#7159 = ADVANCED_FACE('',(#7160),#7171,.T.); +#7160 = FACE_BOUND('',#7161,.T.); +#7161 = EDGE_LOOP('',(#7162,#7163,#7164,#7170)); +#7162 = ORIENTED_EDGE('',*,*,#4719,.T.); +#7163 = ORIENTED_EDGE('',*,*,#7122,.T.); +#7164 = ORIENTED_EDGE('',*,*,#7165,.F.); +#7165 = EDGE_CURVE('',#7050,#7123,#7166,.T.); +#7166 = LINE('',#7167,#7168); +#7167 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#7168 = VECTOR('',#7169,1.); +#7169 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7170 = ORIENTED_EDGE('',*,*,#7049,.F.); +#7171 = PLANE('',#7172); +#7172 = AXIS2_PLACEMENT_3D('',#7173,#7174,#7175); +#7173 = CARTESIAN_POINT('',(-0.1,-10.3,4.5)); +#7174 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7175 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7176 = ADVANCED_FACE('',(#7177),#7188,.T.); +#7177 = FACE_BOUND('',#7178,.T.); +#7178 = EDGE_LOOP('',(#7179,#7180,#7181,#7182)); +#7179 = ORIENTED_EDGE('',*,*,#4895,.T.); +#7180 = ORIENTED_EDGE('',*,*,#4758,.T.); +#7181 = ORIENTED_EDGE('',*,*,#4783,.T.); +#7182 = ORIENTED_EDGE('',*,*,#7183,.T.); +#7183 = EDGE_CURVE('',#4784,#4888,#7184,.T.); +#7184 = LINE('',#7185,#7186); +#7185 = CARTESIAN_POINT('',(0.1,-8.,0.9)); +#7186 = VECTOR('',#7187,1.); +#7187 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7188 = PLANE('',#7189); +#7189 = AXIS2_PLACEMENT_3D('',#7190,#7191,#7192); +#7190 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#7191 = DIRECTION('',(0.,0.,1.)); +#7192 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7193 = ADVANCED_FACE('',(#7194),#7205,.T.); +#7194 = FACE_BOUND('',#7195,.T.); +#7195 = EDGE_LOOP('',(#7196,#7197,#7203,#7204)); +#7196 = ORIENTED_EDGE('',*,*,#4863,.T.); +#7197 = ORIENTED_EDGE('',*,*,#7198,.F.); +#7198 = EDGE_CURVE('',#4808,#4864,#7199,.T.); +#7199 = LINE('',#7200,#7201); +#7200 = CARTESIAN_POINT('',(-0.1,-8.,0.9)); +#7201 = VECTOR('',#7202,1.); +#7202 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7203 = ORIENTED_EDGE('',*,*,#4815,.T.); +#7204 = ORIENTED_EDGE('',*,*,#4838,.T.); +#7205 = PLANE('',#7206); +#7206 = AXIS2_PLACEMENT_3D('',#7207,#7208,#7209); +#7207 = CARTESIAN_POINT('',(-8.604228440845E-16,-8.,0.9)); +#7208 = DIRECTION('',(0.,0.,1.)); +#7209 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7210 = ADVANCED_FACE('',(#7211),#7254,.T.); +#7211 = FACE_BOUND('',#7212,.T.); +#7212 = EDGE_LOOP('',(#7213,#7214,#7222,#7230,#7238,#7246,#7252,#7253)); +#7213 = ORIENTED_EDGE('',*,*,#4871,.F.); +#7214 = ORIENTED_EDGE('',*,*,#7215,.T.); +#7215 = EDGE_CURVE('',#4872,#7216,#7218,.T.); +#7216 = VERTEX_POINT('',#7217); +#7217 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#7218 = LINE('',#7219,#7220); +#7219 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#7220 = VECTOR('',#7221,1.); +#7221 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7222 = ORIENTED_EDGE('',*,*,#7223,.T.); +#7223 = EDGE_CURVE('',#7216,#7224,#7226,.T.); +#7224 = VERTEX_POINT('',#7225); +#7225 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#7226 = LINE('',#7227,#7228); +#7227 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#7228 = VECTOR('',#7229,1.); +#7229 = DIRECTION('',(0.,0.,-1.)); +#7230 = ORIENTED_EDGE('',*,*,#7231,.T.); +#7231 = EDGE_CURVE('',#7224,#7232,#7234,.T.); +#7232 = VERTEX_POINT('',#7233); +#7233 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#7234 = LINE('',#7235,#7236); +#7235 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#7236 = VECTOR('',#7237,1.); +#7237 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7238 = ORIENTED_EDGE('',*,*,#7239,.T.); +#7239 = EDGE_CURVE('',#7232,#7240,#7242,.T.); +#7240 = VERTEX_POINT('',#7241); +#7241 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#7242 = LINE('',#7243,#7244); +#7243 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#7244 = VECTOR('',#7245,1.); +#7245 = DIRECTION('',(0.,0.,1.)); +#7246 = ORIENTED_EDGE('',*,*,#7247,.T.); +#7247 = EDGE_CURVE('',#7240,#4800,#7248,.T.); +#7248 = LINE('',#7249,#7250); +#7249 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#7250 = VECTOR('',#7251,1.); +#7251 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7252 = ORIENTED_EDGE('',*,*,#4807,.F.); +#7253 = ORIENTED_EDGE('',*,*,#7198,.T.); +#7254 = PLANE('',#7255); +#7255 = AXIS2_PLACEMENT_3D('',#7256,#7257,#7258); +#7256 = CARTESIAN_POINT('',(-0.1,-8.,2.448597401424)); +#7257 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7258 = DIRECTION('',(0.,0.,1.)); +#7259 = ADVANCED_FACE('',(#7260),#7278,.T.); +#7260 = FACE_BOUND('',#7261,.T.); +#7261 = EDGE_LOOP('',(#7262,#7270,#7276,#7277)); +#7262 = ORIENTED_EDGE('',*,*,#7263,.T.); +#7263 = EDGE_CURVE('',#7240,#7264,#7266,.T.); +#7264 = VERTEX_POINT('',#7265); +#7265 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#7266 = LINE('',#7267,#7268); +#7267 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#7268 = VECTOR('',#7269,1.); +#7269 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7270 = ORIENTED_EDGE('',*,*,#7271,.T.); +#7271 = EDGE_CURVE('',#7264,#4792,#7272,.T.); +#7272 = LINE('',#7273,#7274); +#7273 = CARTESIAN_POINT('',(0.1,-7.75,4.45)); +#7274 = VECTOR('',#7275,1.); +#7275 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7276 = ORIENTED_EDGE('',*,*,#4799,.F.); +#7277 = ORIENTED_EDGE('',*,*,#7247,.F.); +#7278 = PLANE('',#7279); +#7279 = AXIS2_PLACEMENT_3D('',#7280,#7281,#7282); +#7280 = CARTESIAN_POINT('',(-0.1,-7.75,4.45)); +#7281 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7282 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7283 = ADVANCED_FACE('',(#7284),#7320,.F.); +#7284 = FACE_BOUND('',#7285,.F.); +#7285 = EDGE_LOOP('',(#7286,#7287,#7295,#7303,#7311,#7317,#7318,#7319)); +#7286 = ORIENTED_EDGE('',*,*,#4887,.F.); +#7287 = ORIENTED_EDGE('',*,*,#7288,.T.); +#7288 = EDGE_CURVE('',#4880,#7289,#7291,.T.); +#7289 = VERTEX_POINT('',#7290); +#7290 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#7291 = LINE('',#7292,#7293); +#7292 = CARTESIAN_POINT('',(0.1,-8.3,4.5)); +#7293 = VECTOR('',#7294,1.); +#7294 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7295 = ORIENTED_EDGE('',*,*,#7296,.T.); +#7296 = EDGE_CURVE('',#7289,#7297,#7299,.T.); +#7297 = VERTEX_POINT('',#7298); +#7298 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#7299 = LINE('',#7300,#7301); +#7300 = CARTESIAN_POINT('',(0.1,-8.25,4.45)); +#7301 = VECTOR('',#7302,1.); +#7302 = DIRECTION('',(0.,0.,-1.)); +#7303 = ORIENTED_EDGE('',*,*,#7304,.T.); +#7304 = EDGE_CURVE('',#7297,#7305,#7307,.T.); +#7305 = VERTEX_POINT('',#7306); +#7306 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#7307 = LINE('',#7308,#7309); +#7308 = CARTESIAN_POINT('',(0.1,-8.25,1.25)); +#7309 = VECTOR('',#7310,1.); +#7310 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7311 = ORIENTED_EDGE('',*,*,#7312,.T.); +#7312 = EDGE_CURVE('',#7305,#7264,#7313,.T.); +#7313 = LINE('',#7314,#7315); +#7314 = CARTESIAN_POINT('',(0.1,-7.75,1.25)); +#7315 = VECTOR('',#7316,1.); +#7316 = DIRECTION('',(0.,0.,1.)); +#7317 = ORIENTED_EDGE('',*,*,#7271,.T.); +#7318 = ORIENTED_EDGE('',*,*,#4791,.F.); +#7319 = ORIENTED_EDGE('',*,*,#7183,.T.); +#7320 = PLANE('',#7321); +#7321 = AXIS2_PLACEMENT_3D('',#7322,#7323,#7324); +#7322 = CARTESIAN_POINT('',(0.1,-8.,2.448597401424)); +#7323 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7324 = DIRECTION('',(0.,0.,1.)); +#7325 = ADVANCED_FACE('',(#7326),#7337,.T.); +#7326 = FACE_BOUND('',#7327,.T.); +#7327 = EDGE_LOOP('',(#7328,#7329,#7330,#7336)); +#7328 = ORIENTED_EDGE('',*,*,#4879,.T.); +#7329 = ORIENTED_EDGE('',*,*,#7288,.T.); +#7330 = ORIENTED_EDGE('',*,*,#7331,.F.); +#7331 = EDGE_CURVE('',#7216,#7289,#7332,.T.); +#7332 = LINE('',#7333,#7334); +#7333 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#7334 = VECTOR('',#7335,1.); +#7335 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7336 = ORIENTED_EDGE('',*,*,#7215,.F.); +#7337 = PLANE('',#7338); +#7338 = AXIS2_PLACEMENT_3D('',#7339,#7340,#7341); +#7339 = CARTESIAN_POINT('',(-0.1,-8.3,4.5)); +#7340 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7341 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7342 = ADVANCED_FACE('',(#7343),#7354,.T.); +#7343 = FACE_BOUND('',#7344,.T.); +#7344 = EDGE_LOOP('',(#7345,#7346,#7347,#7348)); +#7345 = ORIENTED_EDGE('',*,*,#5055,.T.); +#7346 = ORIENTED_EDGE('',*,*,#4918,.T.); +#7347 = ORIENTED_EDGE('',*,*,#4943,.T.); +#7348 = ORIENTED_EDGE('',*,*,#7349,.T.); +#7349 = EDGE_CURVE('',#4944,#5048,#7350,.T.); +#7350 = LINE('',#7351,#7352); +#7351 = CARTESIAN_POINT('',(0.1,-6.,0.9)); +#7352 = VECTOR('',#7353,1.); +#7353 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7354 = PLANE('',#7355); +#7355 = AXIS2_PLACEMENT_3D('',#7356,#7357,#7358); +#7356 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#7357 = DIRECTION('',(0.,0.,1.)); +#7358 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7359 = ADVANCED_FACE('',(#7360),#7371,.T.); +#7360 = FACE_BOUND('',#7361,.T.); +#7361 = EDGE_LOOP('',(#7362,#7363,#7369,#7370)); +#7362 = ORIENTED_EDGE('',*,*,#5023,.T.); +#7363 = ORIENTED_EDGE('',*,*,#7364,.F.); +#7364 = EDGE_CURVE('',#4968,#5024,#7365,.T.); +#7365 = LINE('',#7366,#7367); +#7366 = CARTESIAN_POINT('',(-0.1,-6.,0.9)); +#7367 = VECTOR('',#7368,1.); +#7368 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7369 = ORIENTED_EDGE('',*,*,#4975,.T.); +#7370 = ORIENTED_EDGE('',*,*,#4998,.T.); +#7371 = PLANE('',#7372); +#7372 = AXIS2_PLACEMENT_3D('',#7373,#7374,#7375); +#7373 = CARTESIAN_POINT('',(-6.383782391595E-16,-6.,0.9)); +#7374 = DIRECTION('',(0.,0.,1.)); +#7375 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7376 = ADVANCED_FACE('',(#7377),#7420,.T.); +#7377 = FACE_BOUND('',#7378,.T.); +#7378 = EDGE_LOOP('',(#7379,#7380,#7388,#7396,#7404,#7412,#7418,#7419)); +#7379 = ORIENTED_EDGE('',*,*,#5031,.F.); +#7380 = ORIENTED_EDGE('',*,*,#7381,.T.); +#7381 = EDGE_CURVE('',#5032,#7382,#7384,.T.); +#7382 = VERTEX_POINT('',#7383); +#7383 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#7384 = LINE('',#7385,#7386); +#7385 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#7386 = VECTOR('',#7387,1.); +#7387 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7388 = ORIENTED_EDGE('',*,*,#7389,.T.); +#7389 = EDGE_CURVE('',#7382,#7390,#7392,.T.); +#7390 = VERTEX_POINT('',#7391); +#7391 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#7392 = LINE('',#7393,#7394); +#7393 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#7394 = VECTOR('',#7395,1.); +#7395 = DIRECTION('',(0.,0.,-1.)); +#7396 = ORIENTED_EDGE('',*,*,#7397,.T.); +#7397 = EDGE_CURVE('',#7390,#7398,#7400,.T.); +#7398 = VERTEX_POINT('',#7399); +#7399 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#7400 = LINE('',#7401,#7402); +#7401 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#7402 = VECTOR('',#7403,1.); +#7403 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7404 = ORIENTED_EDGE('',*,*,#7405,.T.); +#7405 = EDGE_CURVE('',#7398,#7406,#7408,.T.); +#7406 = VERTEX_POINT('',#7407); +#7407 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#7408 = LINE('',#7409,#7410); +#7409 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#7410 = VECTOR('',#7411,1.); +#7411 = DIRECTION('',(0.,0.,1.)); +#7412 = ORIENTED_EDGE('',*,*,#7413,.T.); +#7413 = EDGE_CURVE('',#7406,#4960,#7414,.T.); +#7414 = LINE('',#7415,#7416); +#7415 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#7416 = VECTOR('',#7417,1.); +#7417 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7418 = ORIENTED_EDGE('',*,*,#4967,.F.); +#7419 = ORIENTED_EDGE('',*,*,#7364,.T.); +#7420 = PLANE('',#7421); +#7421 = AXIS2_PLACEMENT_3D('',#7422,#7423,#7424); +#7422 = CARTESIAN_POINT('',(-0.1,-6.,2.448597401424)); +#7423 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7424 = DIRECTION('',(0.,0.,1.)); +#7425 = ADVANCED_FACE('',(#7426),#7444,.T.); +#7426 = FACE_BOUND('',#7427,.T.); +#7427 = EDGE_LOOP('',(#7428,#7436,#7442,#7443)); +#7428 = ORIENTED_EDGE('',*,*,#7429,.T.); +#7429 = EDGE_CURVE('',#7406,#7430,#7432,.T.); +#7430 = VERTEX_POINT('',#7431); +#7431 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#7432 = LINE('',#7433,#7434); +#7433 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#7434 = VECTOR('',#7435,1.); +#7435 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7436 = ORIENTED_EDGE('',*,*,#7437,.T.); +#7437 = EDGE_CURVE('',#7430,#4952,#7438,.T.); +#7438 = LINE('',#7439,#7440); +#7439 = CARTESIAN_POINT('',(0.1,-5.75,4.45)); +#7440 = VECTOR('',#7441,1.); +#7441 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7442 = ORIENTED_EDGE('',*,*,#4959,.F.); +#7443 = ORIENTED_EDGE('',*,*,#7413,.F.); +#7444 = PLANE('',#7445); +#7445 = AXIS2_PLACEMENT_3D('',#7446,#7447,#7448); +#7446 = CARTESIAN_POINT('',(-0.1,-5.75,4.45)); +#7447 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7448 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7449 = ADVANCED_FACE('',(#7450),#7486,.F.); +#7450 = FACE_BOUND('',#7451,.F.); +#7451 = EDGE_LOOP('',(#7452,#7453,#7461,#7469,#7477,#7483,#7484,#7485)); +#7452 = ORIENTED_EDGE('',*,*,#5047,.F.); +#7453 = ORIENTED_EDGE('',*,*,#7454,.T.); +#7454 = EDGE_CURVE('',#5040,#7455,#7457,.T.); +#7455 = VERTEX_POINT('',#7456); +#7456 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#7457 = LINE('',#7458,#7459); +#7458 = CARTESIAN_POINT('',(0.1,-6.3,4.5)); +#7459 = VECTOR('',#7460,1.); +#7460 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7461 = ORIENTED_EDGE('',*,*,#7462,.T.); +#7462 = EDGE_CURVE('',#7455,#7463,#7465,.T.); +#7463 = VERTEX_POINT('',#7464); +#7464 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#7465 = LINE('',#7466,#7467); +#7466 = CARTESIAN_POINT('',(0.1,-6.25,4.45)); +#7467 = VECTOR('',#7468,1.); +#7468 = DIRECTION('',(0.,0.,-1.)); +#7469 = ORIENTED_EDGE('',*,*,#7470,.T.); +#7470 = EDGE_CURVE('',#7463,#7471,#7473,.T.); +#7471 = VERTEX_POINT('',#7472); +#7472 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#7473 = LINE('',#7474,#7475); +#7474 = CARTESIAN_POINT('',(0.1,-6.25,1.25)); +#7475 = VECTOR('',#7476,1.); +#7476 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7477 = ORIENTED_EDGE('',*,*,#7478,.T.); +#7478 = EDGE_CURVE('',#7471,#7430,#7479,.T.); +#7479 = LINE('',#7480,#7481); +#7480 = CARTESIAN_POINT('',(0.1,-5.75,1.25)); +#7481 = VECTOR('',#7482,1.); +#7482 = DIRECTION('',(0.,0.,1.)); +#7483 = ORIENTED_EDGE('',*,*,#7437,.T.); +#7484 = ORIENTED_EDGE('',*,*,#4951,.F.); +#7485 = ORIENTED_EDGE('',*,*,#7349,.T.); +#7486 = PLANE('',#7487); +#7487 = AXIS2_PLACEMENT_3D('',#7488,#7489,#7490); +#7488 = CARTESIAN_POINT('',(0.1,-6.,2.448597401424)); +#7489 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7490 = DIRECTION('',(0.,0.,1.)); +#7491 = ADVANCED_FACE('',(#7492),#7503,.T.); +#7492 = FACE_BOUND('',#7493,.T.); +#7493 = EDGE_LOOP('',(#7494,#7495,#7496,#7502)); +#7494 = ORIENTED_EDGE('',*,*,#5039,.T.); +#7495 = ORIENTED_EDGE('',*,*,#7454,.T.); +#7496 = ORIENTED_EDGE('',*,*,#7497,.F.); +#7497 = EDGE_CURVE('',#7382,#7455,#7498,.T.); +#7498 = LINE('',#7499,#7500); +#7499 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#7500 = VECTOR('',#7501,1.); +#7501 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7502 = ORIENTED_EDGE('',*,*,#7381,.F.); +#7503 = PLANE('',#7504); +#7504 = AXIS2_PLACEMENT_3D('',#7505,#7506,#7507); +#7505 = CARTESIAN_POINT('',(-0.1,-6.3,4.5)); +#7506 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7507 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7508 = ADVANCED_FACE('',(#7509),#7520,.T.); +#7509 = FACE_BOUND('',#7510,.T.); +#7510 = EDGE_LOOP('',(#7511,#7512,#7513,#7514)); +#7511 = ORIENTED_EDGE('',*,*,#5215,.T.); +#7512 = ORIENTED_EDGE('',*,*,#5078,.T.); +#7513 = ORIENTED_EDGE('',*,*,#5103,.T.); +#7514 = ORIENTED_EDGE('',*,*,#7515,.T.); +#7515 = EDGE_CURVE('',#5104,#5208,#7516,.T.); +#7516 = LINE('',#7517,#7518); +#7517 = CARTESIAN_POINT('',(0.1,-4.,0.9)); +#7518 = VECTOR('',#7519,1.); +#7519 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7520 = PLANE('',#7521); +#7521 = AXIS2_PLACEMENT_3D('',#7522,#7523,#7524); +#7522 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#7523 = DIRECTION('',(0.,0.,1.)); +#7524 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7525 = ADVANCED_FACE('',(#7526),#7537,.T.); +#7526 = FACE_BOUND('',#7527,.T.); +#7527 = EDGE_LOOP('',(#7528,#7529,#7535,#7536)); +#7528 = ORIENTED_EDGE('',*,*,#5183,.T.); +#7529 = ORIENTED_EDGE('',*,*,#7530,.F.); +#7530 = EDGE_CURVE('',#5128,#5184,#7531,.T.); +#7531 = LINE('',#7532,#7533); +#7532 = CARTESIAN_POINT('',(-0.1,-4.,0.9)); +#7533 = VECTOR('',#7534,1.); +#7534 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7535 = ORIENTED_EDGE('',*,*,#5135,.T.); +#7536 = ORIENTED_EDGE('',*,*,#5158,.T.); +#7537 = PLANE('',#7538); +#7538 = AXIS2_PLACEMENT_3D('',#7539,#7540,#7541); +#7539 = CARTESIAN_POINT('',(-4.163336342344E-16,-4.,0.9)); +#7540 = DIRECTION('',(0.,0.,1.)); +#7541 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7542 = ADVANCED_FACE('',(#7543),#7586,.T.); +#7543 = FACE_BOUND('',#7544,.T.); +#7544 = EDGE_LOOP('',(#7545,#7546,#7554,#7562,#7570,#7578,#7584,#7585)); +#7545 = ORIENTED_EDGE('',*,*,#5191,.F.); +#7546 = ORIENTED_EDGE('',*,*,#7547,.T.); +#7547 = EDGE_CURVE('',#5192,#7548,#7550,.T.); +#7548 = VERTEX_POINT('',#7549); +#7549 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#7550 = LINE('',#7551,#7552); +#7551 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#7552 = VECTOR('',#7553,1.); +#7553 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7554 = ORIENTED_EDGE('',*,*,#7555,.T.); +#7555 = EDGE_CURVE('',#7548,#7556,#7558,.T.); +#7556 = VERTEX_POINT('',#7557); +#7557 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#7558 = LINE('',#7559,#7560); +#7559 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#7560 = VECTOR('',#7561,1.); +#7561 = DIRECTION('',(0.,0.,-1.)); +#7562 = ORIENTED_EDGE('',*,*,#7563,.T.); +#7563 = EDGE_CURVE('',#7556,#7564,#7566,.T.); +#7564 = VERTEX_POINT('',#7565); +#7565 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#7566 = LINE('',#7567,#7568); +#7567 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#7568 = VECTOR('',#7569,1.); +#7569 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7570 = ORIENTED_EDGE('',*,*,#7571,.T.); +#7571 = EDGE_CURVE('',#7564,#7572,#7574,.T.); +#7572 = VERTEX_POINT('',#7573); +#7573 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#7574 = LINE('',#7575,#7576); +#7575 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#7576 = VECTOR('',#7577,1.); +#7577 = DIRECTION('',(0.,0.,1.)); +#7578 = ORIENTED_EDGE('',*,*,#7579,.T.); +#7579 = EDGE_CURVE('',#7572,#5120,#7580,.T.); +#7580 = LINE('',#7581,#7582); +#7581 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#7582 = VECTOR('',#7583,1.); +#7583 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7584 = ORIENTED_EDGE('',*,*,#5127,.F.); +#7585 = ORIENTED_EDGE('',*,*,#7530,.T.); +#7586 = PLANE('',#7587); +#7587 = AXIS2_PLACEMENT_3D('',#7588,#7589,#7590); +#7588 = CARTESIAN_POINT('',(-0.1,-4.,2.448597401424)); +#7589 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7590 = DIRECTION('',(0.,0.,1.)); +#7591 = ADVANCED_FACE('',(#7592),#7610,.T.); +#7592 = FACE_BOUND('',#7593,.T.); +#7593 = EDGE_LOOP('',(#7594,#7602,#7608,#7609)); +#7594 = ORIENTED_EDGE('',*,*,#7595,.T.); +#7595 = EDGE_CURVE('',#7572,#7596,#7598,.T.); +#7596 = VERTEX_POINT('',#7597); +#7597 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#7598 = LINE('',#7599,#7600); +#7599 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#7600 = VECTOR('',#7601,1.); +#7601 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7602 = ORIENTED_EDGE('',*,*,#7603,.T.); +#7603 = EDGE_CURVE('',#7596,#5112,#7604,.T.); +#7604 = LINE('',#7605,#7606); +#7605 = CARTESIAN_POINT('',(0.1,-3.75,4.45)); +#7606 = VECTOR('',#7607,1.); +#7607 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7608 = ORIENTED_EDGE('',*,*,#5119,.F.); +#7609 = ORIENTED_EDGE('',*,*,#7579,.F.); +#7610 = PLANE('',#7611); +#7611 = AXIS2_PLACEMENT_3D('',#7612,#7613,#7614); +#7612 = CARTESIAN_POINT('',(-0.1,-3.75,4.45)); +#7613 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7614 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7615 = ADVANCED_FACE('',(#7616),#7652,.F.); +#7616 = FACE_BOUND('',#7617,.F.); +#7617 = EDGE_LOOP('',(#7618,#7619,#7627,#7635,#7643,#7649,#7650,#7651)); +#7618 = ORIENTED_EDGE('',*,*,#5207,.F.); +#7619 = ORIENTED_EDGE('',*,*,#7620,.T.); +#7620 = EDGE_CURVE('',#5200,#7621,#7623,.T.); +#7621 = VERTEX_POINT('',#7622); +#7622 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#7623 = LINE('',#7624,#7625); +#7624 = CARTESIAN_POINT('',(0.1,-4.3,4.5)); +#7625 = VECTOR('',#7626,1.); +#7626 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7627 = ORIENTED_EDGE('',*,*,#7628,.T.); +#7628 = EDGE_CURVE('',#7621,#7629,#7631,.T.); +#7629 = VERTEX_POINT('',#7630); +#7630 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#7631 = LINE('',#7632,#7633); +#7632 = CARTESIAN_POINT('',(0.1,-4.25,4.45)); +#7633 = VECTOR('',#7634,1.); +#7634 = DIRECTION('',(0.,0.,-1.)); +#7635 = ORIENTED_EDGE('',*,*,#7636,.T.); +#7636 = EDGE_CURVE('',#7629,#7637,#7639,.T.); +#7637 = VERTEX_POINT('',#7638); +#7638 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#7639 = LINE('',#7640,#7641); +#7640 = CARTESIAN_POINT('',(0.1,-4.25,1.25)); +#7641 = VECTOR('',#7642,1.); +#7642 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7643 = ORIENTED_EDGE('',*,*,#7644,.T.); +#7644 = EDGE_CURVE('',#7637,#7596,#7645,.T.); +#7645 = LINE('',#7646,#7647); +#7646 = CARTESIAN_POINT('',(0.1,-3.75,1.25)); +#7647 = VECTOR('',#7648,1.); +#7648 = DIRECTION('',(0.,0.,1.)); +#7649 = ORIENTED_EDGE('',*,*,#7603,.T.); +#7650 = ORIENTED_EDGE('',*,*,#5111,.F.); +#7651 = ORIENTED_EDGE('',*,*,#7515,.T.); +#7652 = PLANE('',#7653); +#7653 = AXIS2_PLACEMENT_3D('',#7654,#7655,#7656); +#7654 = CARTESIAN_POINT('',(0.1,-4.,2.448597401424)); +#7655 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7656 = DIRECTION('',(0.,0.,1.)); +#7657 = ADVANCED_FACE('',(#7658),#7669,.T.); +#7658 = FACE_BOUND('',#7659,.T.); +#7659 = EDGE_LOOP('',(#7660,#7661,#7662,#7668)); +#7660 = ORIENTED_EDGE('',*,*,#5199,.T.); +#7661 = ORIENTED_EDGE('',*,*,#7620,.T.); +#7662 = ORIENTED_EDGE('',*,*,#7663,.F.); +#7663 = EDGE_CURVE('',#7548,#7621,#7664,.T.); +#7664 = LINE('',#7665,#7666); +#7665 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#7666 = VECTOR('',#7667,1.); +#7667 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7668 = ORIENTED_EDGE('',*,*,#7547,.F.); +#7669 = PLANE('',#7670); +#7670 = AXIS2_PLACEMENT_3D('',#7671,#7672,#7673); +#7671 = CARTESIAN_POINT('',(-0.1,-4.3,4.5)); +#7672 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7673 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7674 = ADVANCED_FACE('',(#7675),#7686,.T.); +#7675 = FACE_BOUND('',#7676,.T.); +#7676 = EDGE_LOOP('',(#7677,#7678,#7679,#7680)); +#7677 = ORIENTED_EDGE('',*,*,#5375,.T.); +#7678 = ORIENTED_EDGE('',*,*,#5238,.T.); +#7679 = ORIENTED_EDGE('',*,*,#5263,.T.); +#7680 = ORIENTED_EDGE('',*,*,#7681,.T.); +#7681 = EDGE_CURVE('',#5264,#5368,#7682,.T.); +#7682 = LINE('',#7683,#7684); +#7683 = CARTESIAN_POINT('',(0.1,-2.,0.9)); +#7684 = VECTOR('',#7685,1.); +#7685 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7686 = PLANE('',#7687); +#7687 = AXIS2_PLACEMENT_3D('',#7688,#7689,#7690); +#7688 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#7689 = DIRECTION('',(0.,0.,1.)); +#7690 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7691 = ADVANCED_FACE('',(#7692),#7703,.T.); +#7692 = FACE_BOUND('',#7693,.T.); +#7693 = EDGE_LOOP('',(#7694,#7695,#7701,#7702)); +#7694 = ORIENTED_EDGE('',*,*,#5343,.T.); +#7695 = ORIENTED_EDGE('',*,*,#7696,.F.); +#7696 = EDGE_CURVE('',#5288,#5344,#7697,.T.); +#7697 = LINE('',#7698,#7699); +#7698 = CARTESIAN_POINT('',(-0.1,-2.,0.9)); +#7699 = VECTOR('',#7700,1.); +#7700 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7701 = ORIENTED_EDGE('',*,*,#5295,.T.); +#7702 = ORIENTED_EDGE('',*,*,#5318,.T.); +#7703 = PLANE('',#7704); +#7704 = AXIS2_PLACEMENT_3D('',#7705,#7706,#7707); +#7705 = CARTESIAN_POINT('',(-1.942890293094E-16,-2.,0.9)); +#7706 = DIRECTION('',(0.,0.,1.)); +#7707 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7708 = ADVANCED_FACE('',(#7709),#7752,.T.); +#7709 = FACE_BOUND('',#7710,.T.); +#7710 = EDGE_LOOP('',(#7711,#7712,#7720,#7728,#7736,#7744,#7750,#7751)); +#7711 = ORIENTED_EDGE('',*,*,#5351,.F.); +#7712 = ORIENTED_EDGE('',*,*,#7713,.T.); +#7713 = EDGE_CURVE('',#5352,#7714,#7716,.T.); +#7714 = VERTEX_POINT('',#7715); +#7715 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#7716 = LINE('',#7717,#7718); +#7717 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#7718 = VECTOR('',#7719,1.); +#7719 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7720 = ORIENTED_EDGE('',*,*,#7721,.T.); +#7721 = EDGE_CURVE('',#7714,#7722,#7724,.T.); +#7722 = VERTEX_POINT('',#7723); +#7723 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#7724 = LINE('',#7725,#7726); +#7725 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#7726 = VECTOR('',#7727,1.); +#7727 = DIRECTION('',(0.,0.,-1.)); +#7728 = ORIENTED_EDGE('',*,*,#7729,.T.); +#7729 = EDGE_CURVE('',#7722,#7730,#7732,.T.); +#7730 = VERTEX_POINT('',#7731); +#7731 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#7732 = LINE('',#7733,#7734); +#7733 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#7734 = VECTOR('',#7735,1.); +#7735 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7736 = ORIENTED_EDGE('',*,*,#7737,.T.); +#7737 = EDGE_CURVE('',#7730,#7738,#7740,.T.); +#7738 = VERTEX_POINT('',#7739); +#7739 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#7740 = LINE('',#7741,#7742); +#7741 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#7742 = VECTOR('',#7743,1.); +#7743 = DIRECTION('',(0.,0.,1.)); +#7744 = ORIENTED_EDGE('',*,*,#7745,.T.); +#7745 = EDGE_CURVE('',#7738,#5280,#7746,.T.); +#7746 = LINE('',#7747,#7748); +#7747 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#7748 = VECTOR('',#7749,1.); +#7749 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7750 = ORIENTED_EDGE('',*,*,#5287,.F.); +#7751 = ORIENTED_EDGE('',*,*,#7696,.T.); +#7752 = PLANE('',#7753); +#7753 = AXIS2_PLACEMENT_3D('',#7754,#7755,#7756); +#7754 = CARTESIAN_POINT('',(-0.1,-2.,2.448597401424)); +#7755 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7756 = DIRECTION('',(0.,0.,1.)); +#7757 = ADVANCED_FACE('',(#7758),#7776,.T.); +#7758 = FACE_BOUND('',#7759,.T.); +#7759 = EDGE_LOOP('',(#7760,#7768,#7774,#7775)); +#7760 = ORIENTED_EDGE('',*,*,#7761,.T.); +#7761 = EDGE_CURVE('',#7738,#7762,#7764,.T.); +#7762 = VERTEX_POINT('',#7763); +#7763 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#7764 = LINE('',#7765,#7766); +#7765 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#7766 = VECTOR('',#7767,1.); +#7767 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7768 = ORIENTED_EDGE('',*,*,#7769,.T.); +#7769 = EDGE_CURVE('',#7762,#5272,#7770,.T.); +#7770 = LINE('',#7771,#7772); +#7771 = CARTESIAN_POINT('',(0.1,-1.75,4.45)); +#7772 = VECTOR('',#7773,1.); +#7773 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7774 = ORIENTED_EDGE('',*,*,#5279,.F.); +#7775 = ORIENTED_EDGE('',*,*,#7745,.F.); +#7776 = PLANE('',#7777); +#7777 = AXIS2_PLACEMENT_3D('',#7778,#7779,#7780); +#7778 = CARTESIAN_POINT('',(-0.1,-1.75,4.45)); +#7779 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7780 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7781 = ADVANCED_FACE('',(#7782),#7818,.F.); +#7782 = FACE_BOUND('',#7783,.F.); +#7783 = EDGE_LOOP('',(#7784,#7785,#7793,#7801,#7809,#7815,#7816,#7817)); +#7784 = ORIENTED_EDGE('',*,*,#5367,.F.); +#7785 = ORIENTED_EDGE('',*,*,#7786,.T.); +#7786 = EDGE_CURVE('',#5360,#7787,#7789,.T.); +#7787 = VERTEX_POINT('',#7788); +#7788 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#7789 = LINE('',#7790,#7791); +#7790 = CARTESIAN_POINT('',(0.1,-2.3,4.5)); +#7791 = VECTOR('',#7792,1.); +#7792 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7793 = ORIENTED_EDGE('',*,*,#7794,.T.); +#7794 = EDGE_CURVE('',#7787,#7795,#7797,.T.); +#7795 = VERTEX_POINT('',#7796); +#7796 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#7797 = LINE('',#7798,#7799); +#7798 = CARTESIAN_POINT('',(0.1,-2.25,4.45)); +#7799 = VECTOR('',#7800,1.); +#7800 = DIRECTION('',(0.,0.,-1.)); +#7801 = ORIENTED_EDGE('',*,*,#7802,.T.); +#7802 = EDGE_CURVE('',#7795,#7803,#7805,.T.); +#7803 = VERTEX_POINT('',#7804); +#7804 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#7805 = LINE('',#7806,#7807); +#7806 = CARTESIAN_POINT('',(0.1,-2.25,1.25)); +#7807 = VECTOR('',#7808,1.); +#7808 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7809 = ORIENTED_EDGE('',*,*,#7810,.T.); +#7810 = EDGE_CURVE('',#7803,#7762,#7811,.T.); +#7811 = LINE('',#7812,#7813); +#7812 = CARTESIAN_POINT('',(0.1,-1.75,1.25)); +#7813 = VECTOR('',#7814,1.); +#7814 = DIRECTION('',(0.,0.,1.)); +#7815 = ORIENTED_EDGE('',*,*,#7769,.T.); +#7816 = ORIENTED_EDGE('',*,*,#5271,.F.); +#7817 = ORIENTED_EDGE('',*,*,#7681,.T.); +#7818 = PLANE('',#7819); +#7819 = AXIS2_PLACEMENT_3D('',#7820,#7821,#7822); +#7820 = CARTESIAN_POINT('',(0.1,-2.,2.448597401424)); +#7821 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7822 = DIRECTION('',(0.,0.,1.)); +#7823 = ADVANCED_FACE('',(#7824),#7835,.T.); +#7824 = FACE_BOUND('',#7825,.T.); +#7825 = EDGE_LOOP('',(#7826,#7827,#7828,#7834)); +#7826 = ORIENTED_EDGE('',*,*,#5359,.T.); +#7827 = ORIENTED_EDGE('',*,*,#7786,.T.); +#7828 = ORIENTED_EDGE('',*,*,#7829,.F.); +#7829 = EDGE_CURVE('',#7714,#7787,#7830,.T.); +#7830 = LINE('',#7831,#7832); +#7831 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#7832 = VECTOR('',#7833,1.); +#7833 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7834 = ORIENTED_EDGE('',*,*,#7713,.F.); +#7835 = PLANE('',#7836); +#7836 = AXIS2_PLACEMENT_3D('',#7837,#7838,#7839); +#7837 = CARTESIAN_POINT('',(-0.1,-2.3,4.5)); +#7838 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7839 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7840 = ADVANCED_FACE('',(#7841),#7852,.T.); +#7841 = FACE_BOUND('',#7842,.T.); +#7842 = EDGE_LOOP('',(#7843,#7844,#7845,#7846)); +#7843 = ORIENTED_EDGE('',*,*,#5535,.T.); +#7844 = ORIENTED_EDGE('',*,*,#5398,.T.); +#7845 = ORIENTED_EDGE('',*,*,#5423,.T.); +#7846 = ORIENTED_EDGE('',*,*,#7847,.T.); +#7847 = EDGE_CURVE('',#5424,#5528,#7848,.T.); +#7848 = LINE('',#7849,#7850); +#7849 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,0.9)); +#7850 = VECTOR('',#7851,1.); +#7851 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7852 = PLANE('',#7853); +#7853 = AXIS2_PLACEMENT_3D('',#7854,#7855,#7856); +#7854 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9)); +#7855 = DIRECTION('',(0.,0.,1.)); +#7856 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7857 = ADVANCED_FACE('',(#7858),#7869,.T.); +#7858 = FACE_BOUND('',#7859,.T.); +#7859 = EDGE_LOOP('',(#7860,#7861,#7867,#7868)); +#7860 = ORIENTED_EDGE('',*,*,#5503,.T.); +#7861 = ORIENTED_EDGE('',*,*,#7862,.F.); +#7862 = EDGE_CURVE('',#5448,#5504,#7863,.T.); +#7863 = LINE('',#7864,#7865); +#7864 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,0.9)); +#7865 = VECTOR('',#7866,1.); +#7866 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#7867 = ORIENTED_EDGE('',*,*,#5455,.T.); +#7868 = ORIENTED_EDGE('',*,*,#5478,.T.); +#7869 = PLANE('',#7870); +#7870 = AXIS2_PLACEMENT_3D('',#7871,#7872,#7873); +#7871 = CARTESIAN_POINT('',(2.775557561563E-17,-3.08148791102E-33,0.9)); +#7872 = DIRECTION('',(0.,0.,1.)); +#7873 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#7874 = ADVANCED_FACE('',(#7875),#7918,.T.); +#7875 = FACE_BOUND('',#7876,.T.); +#7876 = EDGE_LOOP('',(#7877,#7878,#7886,#7894,#7902,#7910,#7916,#7917)); +#7877 = ORIENTED_EDGE('',*,*,#5511,.F.); +#7878 = ORIENTED_EDGE('',*,*,#7879,.T.); +#7879 = EDGE_CURVE('',#5512,#7880,#7882,.T.); +#7880 = VERTEX_POINT('',#7881); +#7881 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#7882 = LINE('',#7883,#7884); +#7883 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#7884 = VECTOR('',#7885,1.); +#7885 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7886 = ORIENTED_EDGE('',*,*,#7887,.T.); +#7887 = EDGE_CURVE('',#7880,#7888,#7890,.T.); +#7888 = VERTEX_POINT('',#7889); +#7889 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#7890 = LINE('',#7891,#7892); +#7891 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#7892 = VECTOR('',#7893,1.); +#7893 = DIRECTION('',(0.,0.,-1.)); +#7894 = ORIENTED_EDGE('',*,*,#7895,.T.); +#7895 = EDGE_CURVE('',#7888,#7896,#7898,.T.); +#7896 = VERTEX_POINT('',#7897); +#7897 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#7898 = LINE('',#7899,#7900); +#7899 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#7900 = VECTOR('',#7901,1.); +#7901 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7902 = ORIENTED_EDGE('',*,*,#7903,.T.); +#7903 = EDGE_CURVE('',#7896,#7904,#7906,.T.); +#7904 = VERTEX_POINT('',#7905); +#7905 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#7906 = LINE('',#7907,#7908); +#7907 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#7908 = VECTOR('',#7909,1.); +#7909 = DIRECTION('',(0.,0.,1.)); +#7910 = ORIENTED_EDGE('',*,*,#7911,.T.); +#7911 = EDGE_CURVE('',#7904,#5440,#7912,.T.); +#7912 = LINE('',#7913,#7914); +#7913 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#7914 = VECTOR('',#7915,1.); +#7915 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7916 = ORIENTED_EDGE('',*,*,#5447,.F.); +#7917 = ORIENTED_EDGE('',*,*,#7862,.T.); +#7918 = PLANE('',#7919); +#7919 = AXIS2_PLACEMENT_3D('',#7920,#7921,#7922); +#7920 = CARTESIAN_POINT('',(-0.1,1.110223024625E-17,2.448597401424)); +#7921 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7922 = DIRECTION('',(0.,0.,1.)); +#7923 = ADVANCED_FACE('',(#7924),#7942,.T.); +#7924 = FACE_BOUND('',#7925,.T.); +#7925 = EDGE_LOOP('',(#7926,#7934,#7940,#7941)); +#7926 = ORIENTED_EDGE('',*,*,#7927,.T.); +#7927 = EDGE_CURVE('',#7904,#7928,#7930,.T.); +#7928 = VERTEX_POINT('',#7929); +#7929 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#7930 = LINE('',#7931,#7932); +#7931 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#7932 = VECTOR('',#7933,1.); +#7933 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#7934 = ORIENTED_EDGE('',*,*,#7935,.T.); +#7935 = EDGE_CURVE('',#7928,#5432,#7936,.T.); +#7936 = LINE('',#7937,#7938); +#7937 = CARTESIAN_POINT('',(0.1,0.25,4.45)); +#7938 = VECTOR('',#7939,1.); +#7939 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7940 = ORIENTED_EDGE('',*,*,#5439,.F.); +#7941 = ORIENTED_EDGE('',*,*,#7911,.F.); +#7942 = PLANE('',#7943); +#7943 = AXIS2_PLACEMENT_3D('',#7944,#7945,#7946); +#7944 = CARTESIAN_POINT('',(-0.1,0.25,4.45)); +#7945 = DIRECTION('',(-7.850462293414E-17,-0.707106781187,0.707106781187 + )); +#7946 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#7947 = ADVANCED_FACE('',(#7948),#7984,.F.); +#7948 = FACE_BOUND('',#7949,.F.); +#7949 = EDGE_LOOP('',(#7950,#7951,#7959,#7967,#7975,#7981,#7982,#7983)); +#7950 = ORIENTED_EDGE('',*,*,#5527,.F.); +#7951 = ORIENTED_EDGE('',*,*,#7952,.T.); +#7952 = EDGE_CURVE('',#5520,#7953,#7955,.T.); +#7953 = VERTEX_POINT('',#7954); +#7954 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#7955 = LINE('',#7956,#7957); +#7956 = CARTESIAN_POINT('',(0.1,-0.3,4.5)); +#7957 = VECTOR('',#7958,1.); +#7958 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#7959 = ORIENTED_EDGE('',*,*,#7960,.T.); +#7960 = EDGE_CURVE('',#7953,#7961,#7963,.T.); +#7961 = VERTEX_POINT('',#7962); +#7962 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#7963 = LINE('',#7964,#7965); +#7964 = CARTESIAN_POINT('',(0.1,-0.25,4.45)); +#7965 = VECTOR('',#7966,1.); +#7966 = DIRECTION('',(0.,0.,-1.)); +#7967 = ORIENTED_EDGE('',*,*,#7968,.T.); +#7968 = EDGE_CURVE('',#7961,#7969,#7971,.T.); +#7969 = VERTEX_POINT('',#7970); +#7970 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#7971 = LINE('',#7972,#7973); +#7972 = CARTESIAN_POINT('',(0.1,-0.25,1.25)); +#7973 = VECTOR('',#7974,1.); +#7974 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#7975 = ORIENTED_EDGE('',*,*,#7976,.T.); +#7976 = EDGE_CURVE('',#7969,#7928,#7977,.T.); +#7977 = LINE('',#7978,#7979); +#7978 = CARTESIAN_POINT('',(0.1,0.25,1.25)); +#7979 = VECTOR('',#7980,1.); +#7980 = DIRECTION('',(0.,0.,1.)); +#7981 = ORIENTED_EDGE('',*,*,#7935,.T.); +#7982 = ORIENTED_EDGE('',*,*,#5431,.F.); +#7983 = ORIENTED_EDGE('',*,*,#7847,.T.); +#7984 = PLANE('',#7985); +#7985 = AXIS2_PLACEMENT_3D('',#7986,#7987,#7988); +#7986 = CARTESIAN_POINT('',(0.1,-1.110223024625E-17,2.448597401424)); +#7987 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#7988 = DIRECTION('',(0.,0.,1.)); +#7989 = ADVANCED_FACE('',(#7990),#8001,.T.); +#7990 = FACE_BOUND('',#7991,.T.); +#7991 = EDGE_LOOP('',(#7992,#7993,#7994,#8000)); +#7992 = ORIENTED_EDGE('',*,*,#5519,.T.); +#7993 = ORIENTED_EDGE('',*,*,#7952,.T.); +#7994 = ORIENTED_EDGE('',*,*,#7995,.F.); +#7995 = EDGE_CURVE('',#7880,#7953,#7996,.T.); +#7996 = LINE('',#7997,#7998); +#7997 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#7998 = VECTOR('',#7999,1.); +#7999 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8000 = ORIENTED_EDGE('',*,*,#7879,.F.); +#8001 = PLANE('',#8002); +#8002 = AXIS2_PLACEMENT_3D('',#8003,#8004,#8005); +#8003 = CARTESIAN_POINT('',(-0.1,-0.3,4.5)); +#8004 = DIRECTION('',(7.850462293414E-17,0.707106781187,0.707106781187) + ); +#8005 = DIRECTION('',(7.850462293414E-17,0.707106781187,-0.707106781187) + ); +#8006 = ADVANCED_FACE('',(#8007),#8018,.T.); +#8007 = FACE_BOUND('',#8008,.T.); +#8008 = EDGE_LOOP('',(#8009,#8015,#8016,#8017)); +#8009 = ORIENTED_EDGE('',*,*,#8010,.T.); +#8010 = EDGE_CURVE('',#6402,#6475,#8011,.T.); +#8011 = LINE('',#8012,#8013); +#8012 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#8013 = VECTOR('',#8014,1.); +#8014 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8015 = ORIENTED_EDGE('',*,*,#6482,.T.); +#8016 = ORIENTED_EDGE('',*,*,#6433,.F.); +#8017 = ORIENTED_EDGE('',*,*,#6409,.F.); +#8018 = PLANE('',#8019); +#8019 = AXIS2_PLACEMENT_3D('',#8020,#8021,#8022); +#8020 = CARTESIAN_POINT('',(-0.1,-17.75,1.25)); +#8021 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8022 = DIRECTION('',(0.,0.,1.)); +#8023 = ADVANCED_FACE('',(#8024),#8035,.T.); +#8024 = FACE_BOUND('',#8025,.T.); +#8025 = EDGE_LOOP('',(#8026,#8032,#8033,#8034)); +#8026 = ORIENTED_EDGE('',*,*,#8027,.T.); +#8027 = EDGE_CURVE('',#6394,#6467,#8028,.T.); +#8028 = LINE('',#8029,#8030); +#8029 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#8030 = VECTOR('',#8031,1.); +#8031 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8032 = ORIENTED_EDGE('',*,*,#6474,.T.); +#8033 = ORIENTED_EDGE('',*,*,#8010,.F.); +#8034 = ORIENTED_EDGE('',*,*,#6401,.F.); +#8035 = PLANE('',#8036); +#8036 = AXIS2_PLACEMENT_3D('',#8037,#8038,#8039); +#8037 = CARTESIAN_POINT('',(-0.1,-18.25,1.25)); +#8038 = DIRECTION('',(0.,0.,1.)); +#8039 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8040 = ADVANCED_FACE('',(#8041),#8047,.T.); +#8041 = FACE_BOUND('',#8042,.T.); +#8042 = EDGE_LOOP('',(#8043,#8044,#8045,#8046)); +#8043 = ORIENTED_EDGE('',*,*,#6501,.T.); +#8044 = ORIENTED_EDGE('',*,*,#6466,.T.); +#8045 = ORIENTED_EDGE('',*,*,#8027,.F.); +#8046 = ORIENTED_EDGE('',*,*,#6393,.F.); +#8047 = PLANE('',#8048); +#8048 = AXIS2_PLACEMENT_3D('',#8049,#8050,#8051); +#8049 = CARTESIAN_POINT('',(-0.1,-18.25,4.45)); +#8050 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8051 = DIRECTION('',(0.,0.,-1.)); +#8052 = ADVANCED_FACE('',(#8053),#8064,.T.); +#8053 = FACE_BOUND('',#8054,.T.); +#8054 = EDGE_LOOP('',(#8055,#8061,#8062,#8063)); +#8055 = ORIENTED_EDGE('',*,*,#8056,.T.); +#8056 = EDGE_CURVE('',#6568,#6641,#8057,.T.); +#8057 = LINE('',#8058,#8059); +#8058 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#8059 = VECTOR('',#8060,1.); +#8060 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8061 = ORIENTED_EDGE('',*,*,#6648,.T.); +#8062 = ORIENTED_EDGE('',*,*,#6599,.F.); +#8063 = ORIENTED_EDGE('',*,*,#6575,.F.); +#8064 = PLANE('',#8065); +#8065 = AXIS2_PLACEMENT_3D('',#8066,#8067,#8068); +#8066 = CARTESIAN_POINT('',(-0.1,-15.75,1.25)); +#8067 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8068 = DIRECTION('',(0.,0.,1.)); +#8069 = ADVANCED_FACE('',(#8070),#8081,.T.); +#8070 = FACE_BOUND('',#8071,.T.); +#8071 = EDGE_LOOP('',(#8072,#8078,#8079,#8080)); +#8072 = ORIENTED_EDGE('',*,*,#8073,.T.); +#8073 = EDGE_CURVE('',#6560,#6633,#8074,.T.); +#8074 = LINE('',#8075,#8076); +#8075 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#8076 = VECTOR('',#8077,1.); +#8077 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8078 = ORIENTED_EDGE('',*,*,#6640,.T.); +#8079 = ORIENTED_EDGE('',*,*,#8056,.F.); +#8080 = ORIENTED_EDGE('',*,*,#6567,.F.); +#8081 = PLANE('',#8082); +#8082 = AXIS2_PLACEMENT_3D('',#8083,#8084,#8085); +#8083 = CARTESIAN_POINT('',(-0.1,-16.25,1.25)); +#8084 = DIRECTION('',(0.,0.,1.)); +#8085 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8086 = ADVANCED_FACE('',(#8087),#8093,.T.); +#8087 = FACE_BOUND('',#8088,.T.); +#8088 = EDGE_LOOP('',(#8089,#8090,#8091,#8092)); +#8089 = ORIENTED_EDGE('',*,*,#6667,.T.); +#8090 = ORIENTED_EDGE('',*,*,#6632,.T.); +#8091 = ORIENTED_EDGE('',*,*,#8073,.F.); +#8092 = ORIENTED_EDGE('',*,*,#6559,.F.); +#8093 = PLANE('',#8094); +#8094 = AXIS2_PLACEMENT_3D('',#8095,#8096,#8097); +#8095 = CARTESIAN_POINT('',(-0.1,-16.25,4.45)); +#8096 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8097 = DIRECTION('',(0.,0.,-1.)); +#8098 = ADVANCED_FACE('',(#8099),#8110,.T.); +#8099 = FACE_BOUND('',#8100,.T.); +#8100 = EDGE_LOOP('',(#8101,#8107,#8108,#8109)); +#8101 = ORIENTED_EDGE('',*,*,#8102,.T.); +#8102 = EDGE_CURVE('',#6734,#6807,#8103,.T.); +#8103 = LINE('',#8104,#8105); +#8104 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#8105 = VECTOR('',#8106,1.); +#8106 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8107 = ORIENTED_EDGE('',*,*,#6814,.T.); +#8108 = ORIENTED_EDGE('',*,*,#6765,.F.); +#8109 = ORIENTED_EDGE('',*,*,#6741,.F.); +#8110 = PLANE('',#8111); +#8111 = AXIS2_PLACEMENT_3D('',#8112,#8113,#8114); +#8112 = CARTESIAN_POINT('',(-0.1,-13.75,1.25)); +#8113 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8114 = DIRECTION('',(0.,0.,1.)); +#8115 = ADVANCED_FACE('',(#8116),#8127,.T.); +#8116 = FACE_BOUND('',#8117,.T.); +#8117 = EDGE_LOOP('',(#8118,#8124,#8125,#8126)); +#8118 = ORIENTED_EDGE('',*,*,#8119,.T.); +#8119 = EDGE_CURVE('',#6726,#6799,#8120,.T.); +#8120 = LINE('',#8121,#8122); +#8121 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#8122 = VECTOR('',#8123,1.); +#8123 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8124 = ORIENTED_EDGE('',*,*,#6806,.T.); +#8125 = ORIENTED_EDGE('',*,*,#8102,.F.); +#8126 = ORIENTED_EDGE('',*,*,#6733,.F.); +#8127 = PLANE('',#8128); +#8128 = AXIS2_PLACEMENT_3D('',#8129,#8130,#8131); +#8129 = CARTESIAN_POINT('',(-0.1,-14.25,1.25)); +#8130 = DIRECTION('',(0.,0.,1.)); +#8131 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8132 = ADVANCED_FACE('',(#8133),#8139,.T.); +#8133 = FACE_BOUND('',#8134,.T.); +#8134 = EDGE_LOOP('',(#8135,#8136,#8137,#8138)); +#8135 = ORIENTED_EDGE('',*,*,#6833,.T.); +#8136 = ORIENTED_EDGE('',*,*,#6798,.T.); +#8137 = ORIENTED_EDGE('',*,*,#8119,.F.); +#8138 = ORIENTED_EDGE('',*,*,#6725,.F.); +#8139 = PLANE('',#8140); +#8140 = AXIS2_PLACEMENT_3D('',#8141,#8142,#8143); +#8141 = CARTESIAN_POINT('',(-0.1,-14.25,4.45)); +#8142 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8143 = DIRECTION('',(0.,0.,-1.)); +#8144 = ADVANCED_FACE('',(#8145),#8156,.T.); +#8145 = FACE_BOUND('',#8146,.T.); +#8146 = EDGE_LOOP('',(#8147,#8153,#8154,#8155)); +#8147 = ORIENTED_EDGE('',*,*,#8148,.T.); +#8148 = EDGE_CURVE('',#6900,#6973,#8149,.T.); +#8149 = LINE('',#8150,#8151); +#8150 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#8151 = VECTOR('',#8152,1.); +#8152 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8153 = ORIENTED_EDGE('',*,*,#6980,.T.); +#8154 = ORIENTED_EDGE('',*,*,#6931,.F.); +#8155 = ORIENTED_EDGE('',*,*,#6907,.F.); +#8156 = PLANE('',#8157); +#8157 = AXIS2_PLACEMENT_3D('',#8158,#8159,#8160); +#8158 = CARTESIAN_POINT('',(-0.1,-11.75,1.25)); +#8159 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8160 = DIRECTION('',(0.,0.,1.)); +#8161 = ADVANCED_FACE('',(#8162),#8173,.T.); +#8162 = FACE_BOUND('',#8163,.T.); +#8163 = EDGE_LOOP('',(#8164,#8170,#8171,#8172)); +#8164 = ORIENTED_EDGE('',*,*,#8165,.T.); +#8165 = EDGE_CURVE('',#6892,#6965,#8166,.T.); +#8166 = LINE('',#8167,#8168); +#8167 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#8168 = VECTOR('',#8169,1.); +#8169 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8170 = ORIENTED_EDGE('',*,*,#6972,.T.); +#8171 = ORIENTED_EDGE('',*,*,#8148,.F.); +#8172 = ORIENTED_EDGE('',*,*,#6899,.F.); +#8173 = PLANE('',#8174); +#8174 = AXIS2_PLACEMENT_3D('',#8175,#8176,#8177); +#8175 = CARTESIAN_POINT('',(-0.1,-12.25,1.25)); +#8176 = DIRECTION('',(0.,0.,1.)); +#8177 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8178 = ADVANCED_FACE('',(#8179),#8185,.T.); +#8179 = FACE_BOUND('',#8180,.T.); +#8180 = EDGE_LOOP('',(#8181,#8182,#8183,#8184)); +#8181 = ORIENTED_EDGE('',*,*,#6999,.T.); +#8182 = ORIENTED_EDGE('',*,*,#6964,.T.); +#8183 = ORIENTED_EDGE('',*,*,#8165,.F.); +#8184 = ORIENTED_EDGE('',*,*,#6891,.F.); +#8185 = PLANE('',#8186); +#8186 = AXIS2_PLACEMENT_3D('',#8187,#8188,#8189); +#8187 = CARTESIAN_POINT('',(-0.1,-12.25,4.45)); +#8188 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8189 = DIRECTION('',(0.,0.,-1.)); +#8190 = ADVANCED_FACE('',(#8191),#8202,.T.); +#8191 = FACE_BOUND('',#8192,.T.); +#8192 = EDGE_LOOP('',(#8193,#8199,#8200,#8201)); +#8193 = ORIENTED_EDGE('',*,*,#8194,.T.); +#8194 = EDGE_CURVE('',#7066,#7139,#8195,.T.); +#8195 = LINE('',#8196,#8197); +#8196 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#8197 = VECTOR('',#8198,1.); +#8198 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8199 = ORIENTED_EDGE('',*,*,#7146,.T.); +#8200 = ORIENTED_EDGE('',*,*,#7097,.F.); +#8201 = ORIENTED_EDGE('',*,*,#7073,.F.); +#8202 = PLANE('',#8203); +#8203 = AXIS2_PLACEMENT_3D('',#8204,#8205,#8206); +#8204 = CARTESIAN_POINT('',(-0.1,-9.75,1.25)); +#8205 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8206 = DIRECTION('',(0.,0.,1.)); +#8207 = ADVANCED_FACE('',(#8208),#8219,.T.); +#8208 = FACE_BOUND('',#8209,.T.); +#8209 = EDGE_LOOP('',(#8210,#8216,#8217,#8218)); +#8210 = ORIENTED_EDGE('',*,*,#8211,.T.); +#8211 = EDGE_CURVE('',#7058,#7131,#8212,.T.); +#8212 = LINE('',#8213,#8214); +#8213 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#8214 = VECTOR('',#8215,1.); +#8215 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8216 = ORIENTED_EDGE('',*,*,#7138,.T.); +#8217 = ORIENTED_EDGE('',*,*,#8194,.F.); +#8218 = ORIENTED_EDGE('',*,*,#7065,.F.); +#8219 = PLANE('',#8220); +#8220 = AXIS2_PLACEMENT_3D('',#8221,#8222,#8223); +#8221 = CARTESIAN_POINT('',(-0.1,-10.25,1.25)); +#8222 = DIRECTION('',(0.,0.,1.)); +#8223 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8224 = ADVANCED_FACE('',(#8225),#8231,.T.); +#8225 = FACE_BOUND('',#8226,.T.); +#8226 = EDGE_LOOP('',(#8227,#8228,#8229,#8230)); +#8227 = ORIENTED_EDGE('',*,*,#7165,.T.); +#8228 = ORIENTED_EDGE('',*,*,#7130,.T.); +#8229 = ORIENTED_EDGE('',*,*,#8211,.F.); +#8230 = ORIENTED_EDGE('',*,*,#7057,.F.); +#8231 = PLANE('',#8232); +#8232 = AXIS2_PLACEMENT_3D('',#8233,#8234,#8235); +#8233 = CARTESIAN_POINT('',(-0.1,-10.25,4.45)); +#8234 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8235 = DIRECTION('',(0.,0.,-1.)); +#8236 = ADVANCED_FACE('',(#8237),#8248,.T.); +#8237 = FACE_BOUND('',#8238,.T.); +#8238 = EDGE_LOOP('',(#8239,#8245,#8246,#8247)); +#8239 = ORIENTED_EDGE('',*,*,#8240,.T.); +#8240 = EDGE_CURVE('',#7232,#7305,#8241,.T.); +#8241 = LINE('',#8242,#8243); +#8242 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#8243 = VECTOR('',#8244,1.); +#8244 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8245 = ORIENTED_EDGE('',*,*,#7312,.T.); +#8246 = ORIENTED_EDGE('',*,*,#7263,.F.); +#8247 = ORIENTED_EDGE('',*,*,#7239,.F.); +#8248 = PLANE('',#8249); +#8249 = AXIS2_PLACEMENT_3D('',#8250,#8251,#8252); +#8250 = CARTESIAN_POINT('',(-0.1,-7.75,1.25)); +#8251 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8252 = DIRECTION('',(0.,0.,1.)); +#8253 = ADVANCED_FACE('',(#8254),#8265,.T.); +#8254 = FACE_BOUND('',#8255,.T.); +#8255 = EDGE_LOOP('',(#8256,#8262,#8263,#8264)); +#8256 = ORIENTED_EDGE('',*,*,#8257,.T.); +#8257 = EDGE_CURVE('',#7224,#7297,#8258,.T.); +#8258 = LINE('',#8259,#8260); +#8259 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#8260 = VECTOR('',#8261,1.); +#8261 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8262 = ORIENTED_EDGE('',*,*,#7304,.T.); +#8263 = ORIENTED_EDGE('',*,*,#8240,.F.); +#8264 = ORIENTED_EDGE('',*,*,#7231,.F.); +#8265 = PLANE('',#8266); +#8266 = AXIS2_PLACEMENT_3D('',#8267,#8268,#8269); +#8267 = CARTESIAN_POINT('',(-0.1,-8.25,1.25)); +#8268 = DIRECTION('',(0.,0.,1.)); +#8269 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8270 = ADVANCED_FACE('',(#8271),#8277,.T.); +#8271 = FACE_BOUND('',#8272,.T.); +#8272 = EDGE_LOOP('',(#8273,#8274,#8275,#8276)); +#8273 = ORIENTED_EDGE('',*,*,#7331,.T.); +#8274 = ORIENTED_EDGE('',*,*,#7296,.T.); +#8275 = ORIENTED_EDGE('',*,*,#8257,.F.); +#8276 = ORIENTED_EDGE('',*,*,#7223,.F.); +#8277 = PLANE('',#8278); +#8278 = AXIS2_PLACEMENT_3D('',#8279,#8280,#8281); +#8279 = CARTESIAN_POINT('',(-0.1,-8.25,4.45)); +#8280 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8281 = DIRECTION('',(0.,0.,-1.)); +#8282 = ADVANCED_FACE('',(#8283),#8294,.T.); +#8283 = FACE_BOUND('',#8284,.T.); +#8284 = EDGE_LOOP('',(#8285,#8291,#8292,#8293)); +#8285 = ORIENTED_EDGE('',*,*,#8286,.T.); +#8286 = EDGE_CURVE('',#7398,#7471,#8287,.T.); +#8287 = LINE('',#8288,#8289); +#8288 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#8289 = VECTOR('',#8290,1.); +#8290 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8291 = ORIENTED_EDGE('',*,*,#7478,.T.); +#8292 = ORIENTED_EDGE('',*,*,#7429,.F.); +#8293 = ORIENTED_EDGE('',*,*,#7405,.F.); +#8294 = PLANE('',#8295); +#8295 = AXIS2_PLACEMENT_3D('',#8296,#8297,#8298); +#8296 = CARTESIAN_POINT('',(-0.1,-5.75,1.25)); +#8297 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8298 = DIRECTION('',(0.,0.,1.)); +#8299 = ADVANCED_FACE('',(#8300),#8311,.T.); +#8300 = FACE_BOUND('',#8301,.T.); +#8301 = EDGE_LOOP('',(#8302,#8308,#8309,#8310)); +#8302 = ORIENTED_EDGE('',*,*,#8303,.T.); +#8303 = EDGE_CURVE('',#7390,#7463,#8304,.T.); +#8304 = LINE('',#8305,#8306); +#8305 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#8306 = VECTOR('',#8307,1.); +#8307 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8308 = ORIENTED_EDGE('',*,*,#7470,.T.); +#8309 = ORIENTED_EDGE('',*,*,#8286,.F.); +#8310 = ORIENTED_EDGE('',*,*,#7397,.F.); +#8311 = PLANE('',#8312); +#8312 = AXIS2_PLACEMENT_3D('',#8313,#8314,#8315); +#8313 = CARTESIAN_POINT('',(-0.1,-6.25,1.25)); +#8314 = DIRECTION('',(0.,0.,1.)); +#8315 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8316 = ADVANCED_FACE('',(#8317),#8323,.T.); +#8317 = FACE_BOUND('',#8318,.T.); +#8318 = EDGE_LOOP('',(#8319,#8320,#8321,#8322)); +#8319 = ORIENTED_EDGE('',*,*,#7497,.T.); +#8320 = ORIENTED_EDGE('',*,*,#7462,.T.); +#8321 = ORIENTED_EDGE('',*,*,#8303,.F.); +#8322 = ORIENTED_EDGE('',*,*,#7389,.F.); +#8323 = PLANE('',#8324); +#8324 = AXIS2_PLACEMENT_3D('',#8325,#8326,#8327); +#8325 = CARTESIAN_POINT('',(-0.1,-6.25,4.45)); +#8326 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8327 = DIRECTION('',(0.,0.,-1.)); +#8328 = ADVANCED_FACE('',(#8329),#8340,.T.); +#8329 = FACE_BOUND('',#8330,.T.); +#8330 = EDGE_LOOP('',(#8331,#8337,#8338,#8339)); +#8331 = ORIENTED_EDGE('',*,*,#8332,.T.); +#8332 = EDGE_CURVE('',#7564,#7637,#8333,.T.); +#8333 = LINE('',#8334,#8335); +#8334 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#8335 = VECTOR('',#8336,1.); +#8336 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8337 = ORIENTED_EDGE('',*,*,#7644,.T.); +#8338 = ORIENTED_EDGE('',*,*,#7595,.F.); +#8339 = ORIENTED_EDGE('',*,*,#7571,.F.); +#8340 = PLANE('',#8341); +#8341 = AXIS2_PLACEMENT_3D('',#8342,#8343,#8344); +#8342 = CARTESIAN_POINT('',(-0.1,-3.75,1.25)); +#8343 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8344 = DIRECTION('',(0.,0.,1.)); +#8345 = ADVANCED_FACE('',(#8346),#8357,.T.); +#8346 = FACE_BOUND('',#8347,.T.); +#8347 = EDGE_LOOP('',(#8348,#8354,#8355,#8356)); +#8348 = ORIENTED_EDGE('',*,*,#8349,.T.); +#8349 = EDGE_CURVE('',#7556,#7629,#8350,.T.); +#8350 = LINE('',#8351,#8352); +#8351 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#8352 = VECTOR('',#8353,1.); +#8353 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8354 = ORIENTED_EDGE('',*,*,#7636,.T.); +#8355 = ORIENTED_EDGE('',*,*,#8332,.F.); +#8356 = ORIENTED_EDGE('',*,*,#7563,.F.); +#8357 = PLANE('',#8358); +#8358 = AXIS2_PLACEMENT_3D('',#8359,#8360,#8361); +#8359 = CARTESIAN_POINT('',(-0.1,-4.25,1.25)); +#8360 = DIRECTION('',(0.,0.,1.)); +#8361 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8362 = ADVANCED_FACE('',(#8363),#8369,.T.); +#8363 = FACE_BOUND('',#8364,.T.); +#8364 = EDGE_LOOP('',(#8365,#8366,#8367,#8368)); +#8365 = ORIENTED_EDGE('',*,*,#7663,.T.); +#8366 = ORIENTED_EDGE('',*,*,#7628,.T.); +#8367 = ORIENTED_EDGE('',*,*,#8349,.F.); +#8368 = ORIENTED_EDGE('',*,*,#7555,.F.); +#8369 = PLANE('',#8370); +#8370 = AXIS2_PLACEMENT_3D('',#8371,#8372,#8373); +#8371 = CARTESIAN_POINT('',(-0.1,-4.25,4.45)); +#8372 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8373 = DIRECTION('',(0.,0.,-1.)); +#8374 = ADVANCED_FACE('',(#8375),#8386,.T.); +#8375 = FACE_BOUND('',#8376,.T.); +#8376 = EDGE_LOOP('',(#8377,#8383,#8384,#8385)); +#8377 = ORIENTED_EDGE('',*,*,#8378,.T.); +#8378 = EDGE_CURVE('',#7730,#7803,#8379,.T.); +#8379 = LINE('',#8380,#8381); +#8380 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#8381 = VECTOR('',#8382,1.); +#8382 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8383 = ORIENTED_EDGE('',*,*,#7810,.T.); +#8384 = ORIENTED_EDGE('',*,*,#7761,.F.); +#8385 = ORIENTED_EDGE('',*,*,#7737,.F.); +#8386 = PLANE('',#8387); +#8387 = AXIS2_PLACEMENT_3D('',#8388,#8389,#8390); +#8388 = CARTESIAN_POINT('',(-0.1,-1.75,1.25)); +#8389 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8390 = DIRECTION('',(0.,0.,1.)); +#8391 = ADVANCED_FACE('',(#8392),#8403,.T.); +#8392 = FACE_BOUND('',#8393,.T.); +#8393 = EDGE_LOOP('',(#8394,#8400,#8401,#8402)); +#8394 = ORIENTED_EDGE('',*,*,#8395,.T.); +#8395 = EDGE_CURVE('',#7722,#7795,#8396,.T.); +#8396 = LINE('',#8397,#8398); +#8397 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#8398 = VECTOR('',#8399,1.); +#8399 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8400 = ORIENTED_EDGE('',*,*,#7802,.T.); +#8401 = ORIENTED_EDGE('',*,*,#8378,.F.); +#8402 = ORIENTED_EDGE('',*,*,#7729,.F.); +#8403 = PLANE('',#8404); +#8404 = AXIS2_PLACEMENT_3D('',#8405,#8406,#8407); +#8405 = CARTESIAN_POINT('',(-0.1,-2.25,1.25)); +#8406 = DIRECTION('',(0.,0.,1.)); +#8407 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8408 = ADVANCED_FACE('',(#8409),#8415,.T.); +#8409 = FACE_BOUND('',#8410,.T.); +#8410 = EDGE_LOOP('',(#8411,#8412,#8413,#8414)); +#8411 = ORIENTED_EDGE('',*,*,#7829,.T.); +#8412 = ORIENTED_EDGE('',*,*,#7794,.T.); +#8413 = ORIENTED_EDGE('',*,*,#8395,.F.); +#8414 = ORIENTED_EDGE('',*,*,#7721,.F.); +#8415 = PLANE('',#8416); +#8416 = AXIS2_PLACEMENT_3D('',#8417,#8418,#8419); +#8417 = CARTESIAN_POINT('',(-0.1,-2.25,4.45)); +#8418 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8419 = DIRECTION('',(0.,0.,-1.)); +#8420 = ADVANCED_FACE('',(#8421),#8432,.T.); +#8421 = FACE_BOUND('',#8422,.T.); +#8422 = EDGE_LOOP('',(#8423,#8429,#8430,#8431)); +#8423 = ORIENTED_EDGE('',*,*,#8424,.T.); +#8424 = EDGE_CURVE('',#7896,#7969,#8425,.T.); +#8425 = LINE('',#8426,#8427); +#8426 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#8427 = VECTOR('',#8428,1.); +#8428 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8429 = ORIENTED_EDGE('',*,*,#7976,.T.); +#8430 = ORIENTED_EDGE('',*,*,#7927,.F.); +#8431 = ORIENTED_EDGE('',*,*,#7903,.F.); +#8432 = PLANE('',#8433); +#8433 = AXIS2_PLACEMENT_3D('',#8434,#8435,#8436); +#8434 = CARTESIAN_POINT('',(-0.1,0.25,1.25)); +#8435 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#8436 = DIRECTION('',(0.,0.,1.)); +#8437 = ADVANCED_FACE('',(#8438),#8449,.T.); +#8438 = FACE_BOUND('',#8439,.T.); +#8439 = EDGE_LOOP('',(#8440,#8446,#8447,#8448)); +#8440 = ORIENTED_EDGE('',*,*,#8441,.T.); +#8441 = EDGE_CURVE('',#7888,#7961,#8442,.T.); +#8442 = LINE('',#8443,#8444); +#8443 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#8444 = VECTOR('',#8445,1.); +#8445 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#8446 = ORIENTED_EDGE('',*,*,#7968,.T.); +#8447 = ORIENTED_EDGE('',*,*,#8424,.F.); +#8448 = ORIENTED_EDGE('',*,*,#7895,.F.); +#8449 = PLANE('',#8450); +#8450 = AXIS2_PLACEMENT_3D('',#8451,#8452,#8453); +#8451 = CARTESIAN_POINT('',(-0.1,-0.25,1.25)); +#8452 = DIRECTION('',(0.,0.,1.)); +#8453 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#8454 = ADVANCED_FACE('',(#8455),#8461,.T.); +#8455 = FACE_BOUND('',#8456,.T.); +#8456 = EDGE_LOOP('',(#8457,#8458,#8459,#8460)); +#8457 = ORIENTED_EDGE('',*,*,#7995,.T.); +#8458 = ORIENTED_EDGE('',*,*,#7960,.T.); +#8459 = ORIENTED_EDGE('',*,*,#8441,.F.); +#8460 = ORIENTED_EDGE('',*,*,#7887,.F.); +#8461 = PLANE('',#8462); +#8462 = AXIS2_PLACEMENT_3D('',#8463,#8464,#8465); +#8463 = CARTESIAN_POINT('',(-0.1,-0.25,4.45)); +#8464 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#8465 = DIRECTION('',(0.,0.,-1.)); +#8466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#8470)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#8467,#8468,#8469)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#8467 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#8468 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#8469 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#8470 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#8467, + 'distance_accuracy_value','confusion accuracy'); +#8471 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8472,#8474); +#8472 = ( REPRESENTATION_RELATIONSHIP('','',#423,#400) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8473) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8473 = ITEM_DEFINED_TRANSFORMATION('','',#11,#401); +#8474 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8475); +#8475 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:3]','',#395,#418,$ + ); +#8476 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#420)); +#8477 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8478,#8480); +#8478 = ( REPRESENTATION_RELATIONSHIP('','',#400,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8479) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8479 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#8480 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8481); +#8481 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','U_XBEE1','',#5,#395,$); +#8482 = SHAPE_DEFINITION_REPRESENTATION(#8483,#8489); +#8483 = PRODUCT_DEFINITION_SHAPE('','',#8484); +#8484 = PRODUCT_DEFINITION('design','',#8485,#8488); +#8485 = PRODUCT_DEFINITION_FORMATION('','',#8486); +#8486 = PRODUCT('XBee3_TH_UFL_placeholder','XBee3_TH_UFL_placeholder','' + ,(#8487)); +#8487 = PRODUCT_CONTEXT('',#2,'mechanical'); +#8488 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#8489 = SHAPE_REPRESENTATION('',(#11,#8490),#8494); +#8490 = AXIS2_PLACEMENT_3D('',#8491,#8492,#8493); +#8491 = CARTESIAN_POINT('',(0.,0.,0.)); +#8492 = DIRECTION('',(0.,0.,1.)); +#8493 = DIRECTION('',(1.,0.,-0.)); +#8494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#8498)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#8495,#8496,#8497)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#8495 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#8496 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#8497 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#8498 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#8495, + 'distance_accuracy_value','confusion accuracy'); +#8499 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#8500,#8502); +#8500 = ( REPRESENTATION_RELATIONSHIP('','',#8489,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#8501) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#8501 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#8502 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #8503); +#8503 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','U_XBEE1','',#5,#8484,$); +#8504 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8486)); +#8505 = SHAPE_DEFINITION_REPRESENTATION(#8506,#8512); +#8506 = PRODUCT_DEFINITION_SHAPE('','',#8507); +#8507 = PRODUCT_DEFINITION('design','',#8508,#8511); +#8508 = PRODUCT_DEFINITION_FORMATION('','',#8509); +#8509 = PRODUCT('Open CASCADE STEP translator 8.0 1', + 'Open CASCADE STEP translator 8.0 1','',(#8510)); +#8510 = PRODUCT_CONTEXT('',#2,'mechanical'); +#8511 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#8512 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#8513),#12137); +#8513 = MANIFOLD_SOLID_BREP('',#8514); +#8514 = CLOSED_SHELL('',(#8515,#8555,#8586,#8617,#8752,#8819,#8836,#8853 + ,#8865,#8896,#8920,#8944,#8961,#8992,#9016,#9040,#9057,#9088,#9112, + #9136,#9153,#9184,#9208,#9232,#9249,#9261,#9613,#9965,#9977,#10008, + #10032,#10056,#10073,#10104,#10128,#10152,#10169,#10200,#10224, + #10248,#10265,#10296,#10320,#10344,#10361,#10392,#10416,#10440, + #10457,#10488,#10512,#10536,#10553,#10584,#10608,#10632,#10649, + #10680,#10704,#10728,#10745,#10776,#10800,#10824,#10841,#10872, + #10896,#10920,#10937,#10968,#10992,#11016,#11033,#11064,#11088, + #11112,#11129,#11160,#11184,#11208,#11225,#11256,#11280,#11304, + #11321,#11352,#11376,#11400,#11417,#11448,#11472,#11496,#11513, + #11544,#11568,#11592,#11609,#11640,#11664,#11688,#11705,#11736, + #11760,#11784,#11801,#11832,#11856,#11880,#11897,#11909,#11921, + #11933,#11945,#11957,#11969,#11981,#11993,#12005,#12017,#12029, + #12041,#12053,#12065,#12077,#12089,#12101,#12113,#12125)); +#8515 = ADVANCED_FACE('',(#8516),#8550,.T.); +#8516 = FACE_BOUND('',#8517,.T.); +#8517 = EDGE_LOOP('',(#8518,#8528,#8536,#8544)); +#8518 = ORIENTED_EDGE('',*,*,#8519,.T.); +#8519 = EDGE_CURVE('',#8520,#8522,#8524,.T.); +#8520 = VERTEX_POINT('',#8521); +#8521 = CARTESIAN_POINT('',(-1.19,1.19,7.6066)); +#8522 = VERTEX_POINT('',#8523); +#8523 = CARTESIAN_POINT('',(-1.19,1.19,8.394)); +#8524 = LINE('',#8525,#8526); +#8525 = CARTESIAN_POINT('',(-1.19,1.19,7.6066)); +#8526 = VECTOR('',#8527,1.); +#8527 = DIRECTION('',(0.,0.,1.)); +#8528 = ORIENTED_EDGE('',*,*,#8529,.T.); +#8529 = EDGE_CURVE('',#8522,#8530,#8532,.T.); +#8530 = VERTEX_POINT('',#8531); +#8531 = CARTESIAN_POINT('',(6.5,7.72,8.394)); +#8532 = LINE('',#8533,#8534); +#8533 = CARTESIAN_POINT('',(-1.19,1.19,8.394)); +#8534 = VECTOR('',#8535,1.); +#8535 = DIRECTION('',(0.762257168185,0.64727429236,0.)); +#8536 = ORIENTED_EDGE('',*,*,#8537,.F.); +#8537 = EDGE_CURVE('',#8538,#8530,#8540,.T.); +#8538 = VERTEX_POINT('',#8539); +#8539 = CARTESIAN_POINT('',(6.5,7.72,7.6066)); +#8540 = LINE('',#8541,#8542); +#8541 = CARTESIAN_POINT('',(6.5,7.72,7.6066)); +#8542 = VECTOR('',#8543,1.); +#8543 = DIRECTION('',(0.,0.,1.)); +#8544 = ORIENTED_EDGE('',*,*,#8545,.F.); +#8545 = EDGE_CURVE('',#8520,#8538,#8546,.T.); +#8546 = LINE('',#8547,#8548); +#8547 = CARTESIAN_POINT('',(-1.19,1.19,7.6066)); +#8548 = VECTOR('',#8549,1.); +#8549 = DIRECTION('',(0.762257168185,0.64727429236,0.)); +#8550 = PLANE('',#8551); +#8551 = AXIS2_PLACEMENT_3D('',#8552,#8553,#8554); +#8552 = CARTESIAN_POINT('',(-1.19,1.19,7.6066)); +#8553 = DIRECTION('',(-0.64727429236,0.762257168185,0.)); +#8554 = DIRECTION('',(0.762257168185,0.64727429236,0.)); +#8555 = ADVANCED_FACE('',(#8556),#8581,.T.); +#8556 = FACE_BOUND('',#8557,.T.); +#8557 = EDGE_LOOP('',(#8558,#8568,#8574,#8575)); +#8558 = ORIENTED_EDGE('',*,*,#8559,.T.); +#8559 = EDGE_CURVE('',#8560,#8562,#8564,.T.); +#8560 = VERTEX_POINT('',#8561); +#8561 = CARTESIAN_POINT('',(-1.19,-19.914,7.6066)); +#8562 = VERTEX_POINT('',#8563); +#8563 = CARTESIAN_POINT('',(-1.19,-19.914,8.394)); +#8564 = LINE('',#8565,#8566); +#8565 = CARTESIAN_POINT('',(-1.19,-19.914,7.6066)); +#8566 = VECTOR('',#8567,1.); +#8567 = DIRECTION('',(0.,0.,1.)); +#8568 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8569 = EDGE_CURVE('',#8562,#8522,#8570,.T.); +#8570 = LINE('',#8571,#8572); +#8571 = CARTESIAN_POINT('',(-1.19,-19.914,8.394)); +#8572 = VECTOR('',#8573,1.); +#8573 = DIRECTION('',(0.,1.,0.)); +#8574 = ORIENTED_EDGE('',*,*,#8519,.F.); +#8575 = ORIENTED_EDGE('',*,*,#8576,.F.); +#8576 = EDGE_CURVE('',#8560,#8520,#8577,.T.); +#8577 = LINE('',#8578,#8579); +#8578 = CARTESIAN_POINT('',(-1.19,-19.914,7.6066)); +#8579 = VECTOR('',#8580,1.); +#8580 = DIRECTION('',(0.,1.,0.)); +#8581 = PLANE('',#8582); +#8582 = AXIS2_PLACEMENT_3D('',#8583,#8584,#8585); +#8583 = CARTESIAN_POINT('',(-1.19,-19.914,7.6066)); +#8584 = DIRECTION('',(-1.,0.,0.)); +#8585 = DIRECTION('',(0.,1.,0.)); +#8586 = ADVANCED_FACE('',(#8587),#8612,.T.); +#8587 = FACE_BOUND('',#8588,.T.); +#8588 = EDGE_LOOP('',(#8589,#8590,#8598,#8606)); +#8589 = ORIENTED_EDGE('',*,*,#8537,.T.); +#8590 = ORIENTED_EDGE('',*,*,#8591,.T.); +#8591 = EDGE_CURVE('',#8530,#8592,#8594,.T.); +#8592 = VERTEX_POINT('',#8593); +#8593 = CARTESIAN_POINT('',(15.5,7.72,8.394)); +#8594 = LINE('',#8595,#8596); +#8595 = CARTESIAN_POINT('',(6.5,7.72,8.394)); +#8596 = VECTOR('',#8597,1.); +#8597 = DIRECTION('',(1.,0.,0.)); +#8598 = ORIENTED_EDGE('',*,*,#8599,.F.); +#8599 = EDGE_CURVE('',#8600,#8592,#8602,.T.); +#8600 = VERTEX_POINT('',#8601); +#8601 = CARTESIAN_POINT('',(15.5,7.72,7.6066)); +#8602 = LINE('',#8603,#8604); +#8603 = CARTESIAN_POINT('',(15.5,7.72,7.6066)); +#8604 = VECTOR('',#8605,1.); +#8605 = DIRECTION('',(0.,0.,1.)); +#8606 = ORIENTED_EDGE('',*,*,#8607,.F.); +#8607 = EDGE_CURVE('',#8538,#8600,#8608,.T.); +#8608 = LINE('',#8609,#8610); +#8609 = CARTESIAN_POINT('',(6.5,7.72,7.6066)); +#8610 = VECTOR('',#8611,1.); +#8611 = DIRECTION('',(1.,0.,0.)); +#8612 = PLANE('',#8613); +#8613 = AXIS2_PLACEMENT_3D('',#8614,#8615,#8616); +#8614 = CARTESIAN_POINT('',(6.5,7.72,7.6066)); +#8615 = DIRECTION('',(0.,1.,0.)); +#8616 = DIRECTION('',(1.,0.,0.)); +#8617 = ADVANCED_FACE('',(#8618,#8645,#8679,#8713),#8747,.T.); +#8618 = FACE_BOUND('',#8619,.T.); +#8619 = EDGE_LOOP('',(#8620,#8621,#8622,#8630,#8638,#8644)); +#8620 = ORIENTED_EDGE('',*,*,#8545,.T.); +#8621 = ORIENTED_EDGE('',*,*,#8607,.T.); +#8622 = ORIENTED_EDGE('',*,*,#8623,.T.); +#8623 = EDGE_CURVE('',#8600,#8624,#8626,.T.); +#8624 = VERTEX_POINT('',#8625); +#8625 = CARTESIAN_POINT('',(23.19,1.19,7.6066)); +#8626 = LINE('',#8627,#8628); +#8627 = CARTESIAN_POINT('',(15.5,7.72,7.6066)); +#8628 = VECTOR('',#8629,1.); +#8629 = DIRECTION('',(0.762257168185,-0.64727429236,0.)); +#8630 = ORIENTED_EDGE('',*,*,#8631,.T.); +#8631 = EDGE_CURVE('',#8624,#8632,#8634,.T.); +#8632 = VERTEX_POINT('',#8633); +#8633 = CARTESIAN_POINT('',(23.19,-19.914,7.6066)); +#8634 = LINE('',#8635,#8636); +#8635 = CARTESIAN_POINT('',(23.19,1.19,7.6066)); +#8636 = VECTOR('',#8637,1.); +#8637 = DIRECTION('',(0.,-1.,0.)); +#8638 = ORIENTED_EDGE('',*,*,#8639,.T.); +#8639 = EDGE_CURVE('',#8632,#8560,#8640,.T.); +#8640 = LINE('',#8641,#8642); +#8641 = CARTESIAN_POINT('',(23.19,-19.914,7.6066)); +#8642 = VECTOR('',#8643,1.); +#8643 = DIRECTION('',(-1.,0.,0.)); +#8644 = ORIENTED_EDGE('',*,*,#8576,.T.); +#8645 = FACE_BOUND('',#8646,.T.); +#8646 = EDGE_LOOP('',(#8647,#8657,#8665,#8673)); +#8647 = ORIENTED_EDGE('',*,*,#8648,.F.); +#8648 = EDGE_CURVE('',#8649,#8651,#8653,.T.); +#8649 = VERTEX_POINT('',#8650); +#8650 = CARTESIAN_POINT('',(3.9152,-2.4298,7.6066)); +#8651 = VERTEX_POINT('',#8652); +#8652 = CARTESIAN_POINT('',(15.7262,-2.4298,7.6066)); +#8653 = LINE('',#8654,#8655); +#8654 = CARTESIAN_POINT('',(3.9152,-2.4298,7.6066)); +#8655 = VECTOR('',#8656,1.); +#8656 = DIRECTION('',(1.,0.,-0.)); +#8657 = ORIENTED_EDGE('',*,*,#8658,.F.); +#8658 = EDGE_CURVE('',#8659,#8649,#8661,.T.); +#8659 = VERTEX_POINT('',#8660); +#8660 = CARTESIAN_POINT('',(3.9152,-16.73,7.6066)); +#8661 = LINE('',#8662,#8663); +#8662 = CARTESIAN_POINT('',(3.9152,-16.73,7.6066)); +#8663 = VECTOR('',#8664,1.); +#8664 = DIRECTION('',(-0.,1.,0.)); +#8665 = ORIENTED_EDGE('',*,*,#8666,.T.); +#8666 = EDGE_CURVE('',#8659,#8667,#8669,.T.); +#8667 = VERTEX_POINT('',#8668); +#8668 = CARTESIAN_POINT('',(15.7262,-16.73,7.6066)); +#8669 = LINE('',#8670,#8671); +#8670 = CARTESIAN_POINT('',(3.9152,-16.73,7.6066)); +#8671 = VECTOR('',#8672,1.); +#8672 = DIRECTION('',(1.,0.,-0.)); +#8673 = ORIENTED_EDGE('',*,*,#8674,.T.); +#8674 = EDGE_CURVE('',#8667,#8651,#8675,.T.); +#8675 = LINE('',#8676,#8677); +#8676 = CARTESIAN_POINT('',(15.7262,-16.73,7.6066)); +#8677 = VECTOR('',#8678,1.); +#8678 = DIRECTION('',(-0.,1.,0.)); +#8679 = FACE_BOUND('',#8680,.T.); +#8680 = EDGE_LOOP('',(#8681,#8691,#8699,#8707)); +#8681 = ORIENTED_EDGE('',*,*,#8682,.F.); +#8682 = EDGE_CURVE('',#8683,#8685,#8687,.T.); +#8683 = VERTEX_POINT('',#8684); +#8684 = CARTESIAN_POINT('',(21.,1.,7.6066)); +#8685 = VERTEX_POINT('',#8686); +#8686 = CARTESIAN_POINT('',(23.,1.,7.6066)); +#8687 = LINE('',#8688,#8689); +#8688 = CARTESIAN_POINT('',(21.,1.,7.6066)); +#8689 = VECTOR('',#8690,1.); +#8690 = DIRECTION('',(1.,0.,-0.)); +#8691 = ORIENTED_EDGE('',*,*,#8692,.F.); +#8692 = EDGE_CURVE('',#8693,#8683,#8695,.T.); +#8693 = VERTEX_POINT('',#8694); +#8694 = CARTESIAN_POINT('',(21.,-19.,7.6066)); +#8695 = LINE('',#8696,#8697); +#8696 = CARTESIAN_POINT('',(21.,-19.,7.6066)); +#8697 = VECTOR('',#8698,1.); +#8698 = DIRECTION('',(-0.,1.,0.)); +#8699 = ORIENTED_EDGE('',*,*,#8700,.T.); +#8700 = EDGE_CURVE('',#8693,#8701,#8703,.T.); +#8701 = VERTEX_POINT('',#8702); +#8702 = CARTESIAN_POINT('',(23.,-19.,7.6066)); +#8703 = LINE('',#8704,#8705); +#8704 = CARTESIAN_POINT('',(21.,-19.,7.6066)); +#8705 = VECTOR('',#8706,1.); +#8706 = DIRECTION('',(1.,0.,-0.)); +#8707 = ORIENTED_EDGE('',*,*,#8708,.T.); +#8708 = EDGE_CURVE('',#8701,#8685,#8709,.T.); +#8709 = LINE('',#8710,#8711); +#8710 = CARTESIAN_POINT('',(23.,-19.,7.6066)); +#8711 = VECTOR('',#8712,1.); +#8712 = DIRECTION('',(-0.,1.,0.)); +#8713 = FACE_BOUND('',#8714,.T.); +#8714 = EDGE_LOOP('',(#8715,#8725,#8733,#8741)); +#8715 = ORIENTED_EDGE('',*,*,#8716,.F.); +#8716 = EDGE_CURVE('',#8717,#8719,#8721,.T.); +#8717 = VERTEX_POINT('',#8718); +#8718 = CARTESIAN_POINT('',(-1.,1.,7.6066)); +#8719 = VERTEX_POINT('',#8720); +#8720 = CARTESIAN_POINT('',(1.,1.,7.6066)); +#8721 = LINE('',#8722,#8723); +#8722 = CARTESIAN_POINT('',(-1.,1.,7.6066)); +#8723 = VECTOR('',#8724,1.); +#8724 = DIRECTION('',(1.,0.,-0.)); +#8725 = ORIENTED_EDGE('',*,*,#8726,.F.); +#8726 = EDGE_CURVE('',#8727,#8717,#8729,.T.); +#8727 = VERTEX_POINT('',#8728); +#8728 = CARTESIAN_POINT('',(-1.,-19.,7.6066)); +#8729 = LINE('',#8730,#8731); +#8730 = CARTESIAN_POINT('',(-1.,-19.,7.6066)); +#8731 = VECTOR('',#8732,1.); +#8732 = DIRECTION('',(-0.,1.,0.)); +#8733 = ORIENTED_EDGE('',*,*,#8734,.T.); +#8734 = EDGE_CURVE('',#8727,#8735,#8737,.T.); +#8735 = VERTEX_POINT('',#8736); +#8736 = CARTESIAN_POINT('',(1.,-19.,7.6066)); +#8737 = LINE('',#8738,#8739); +#8738 = CARTESIAN_POINT('',(-1.,-19.,7.6066)); +#8739 = VECTOR('',#8740,1.); +#8740 = DIRECTION('',(1.,0.,-0.)); +#8741 = ORIENTED_EDGE('',*,*,#8742,.T.); +#8742 = EDGE_CURVE('',#8735,#8719,#8743,.T.); +#8743 = LINE('',#8744,#8745); +#8744 = CARTESIAN_POINT('',(1.,-19.,7.6066)); +#8745 = VECTOR('',#8746,1.); +#8746 = DIRECTION('',(-0.,1.,0.)); +#8747 = PLANE('',#8748); +#8748 = AXIS2_PLACEMENT_3D('',#8749,#8750,#8751); +#8749 = CARTESIAN_POINT('',(11.,-7.531844304869,7.6066)); +#8750 = DIRECTION('',(-0.,-0.,-1.)); +#8751 = DIRECTION('',(-1.,0.,0.)); +#8752 = ADVANCED_FACE('',(#8753,#8780),#8814,.F.); +#8753 = FACE_BOUND('',#8754,.F.); +#8754 = EDGE_LOOP('',(#8755,#8756,#8757,#8765,#8773,#8779)); +#8755 = ORIENTED_EDGE('',*,*,#8529,.T.); +#8756 = ORIENTED_EDGE('',*,*,#8591,.T.); +#8757 = ORIENTED_EDGE('',*,*,#8758,.T.); +#8758 = EDGE_CURVE('',#8592,#8759,#8761,.T.); +#8759 = VERTEX_POINT('',#8760); +#8760 = CARTESIAN_POINT('',(23.19,1.19,8.394)); +#8761 = LINE('',#8762,#8763); +#8762 = CARTESIAN_POINT('',(15.5,7.72,8.394)); +#8763 = VECTOR('',#8764,1.); +#8764 = DIRECTION('',(0.762257168185,-0.64727429236,0.)); +#8765 = ORIENTED_EDGE('',*,*,#8766,.T.); +#8766 = EDGE_CURVE('',#8759,#8767,#8769,.T.); +#8767 = VERTEX_POINT('',#8768); +#8768 = CARTESIAN_POINT('',(23.19,-19.914,8.394)); +#8769 = LINE('',#8770,#8771); +#8770 = CARTESIAN_POINT('',(23.19,1.19,8.394)); +#8771 = VECTOR('',#8772,1.); +#8772 = DIRECTION('',(0.,-1.,0.)); +#8773 = ORIENTED_EDGE('',*,*,#8774,.T.); +#8774 = EDGE_CURVE('',#8767,#8562,#8775,.T.); +#8775 = LINE('',#8776,#8777); +#8776 = CARTESIAN_POINT('',(23.19,-19.914,8.394)); +#8777 = VECTOR('',#8778,1.); +#8778 = DIRECTION('',(-1.,0.,0.)); +#8779 = ORIENTED_EDGE('',*,*,#8569,.T.); +#8780 = FACE_BOUND('',#8781,.F.); +#8781 = EDGE_LOOP('',(#8782,#8792,#8800,#8808)); +#8782 = ORIENTED_EDGE('',*,*,#8783,.F.); +#8783 = EDGE_CURVE('',#8784,#8786,#8788,.T.); +#8784 = VERTEX_POINT('',#8785); +#8785 = CARTESIAN_POINT('',(9.5,3.6326,8.394)); +#8786 = VERTEX_POINT('',#8787); +#8787 = CARTESIAN_POINT('',(12.5,3.6326,8.394)); +#8788 = LINE('',#8789,#8790); +#8789 = CARTESIAN_POINT('',(9.5,3.6326,8.394)); +#8790 = VECTOR('',#8791,1.); +#8791 = DIRECTION('',(1.,0.,-0.)); +#8792 = ORIENTED_EDGE('',*,*,#8793,.F.); +#8793 = EDGE_CURVE('',#8794,#8784,#8796,.T.); +#8794 = VERTEX_POINT('',#8795); +#8795 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#8796 = LINE('',#8797,#8798); +#8797 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#8798 = VECTOR('',#8799,1.); +#8799 = DIRECTION('',(-0.,1.,0.)); +#8800 = ORIENTED_EDGE('',*,*,#8801,.T.); +#8801 = EDGE_CURVE('',#8794,#8802,#8804,.T.); +#8802 = VERTEX_POINT('',#8803); +#8803 = CARTESIAN_POINT('',(12.5,0.6326,8.394)); +#8804 = LINE('',#8805,#8806); +#8805 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#8806 = VECTOR('',#8807,1.); +#8807 = DIRECTION('',(1.,0.,-0.)); +#8808 = ORIENTED_EDGE('',*,*,#8809,.T.); +#8809 = EDGE_CURVE('',#8802,#8786,#8810,.T.); +#8810 = LINE('',#8811,#8812); +#8811 = CARTESIAN_POINT('',(12.5,0.6326,8.394)); +#8812 = VECTOR('',#8813,1.); +#8813 = DIRECTION('',(-0.,1.,0.)); +#8814 = PLANE('',#8815); +#8815 = AXIS2_PLACEMENT_3D('',#8816,#8817,#8818); +#8816 = CARTESIAN_POINT('',(11.,-7.531844304869,8.394)); +#8817 = DIRECTION('',(-0.,-0.,-1.)); +#8818 = DIRECTION('',(-1.,0.,0.)); +#8819 = ADVANCED_FACE('',(#8820),#8831,.T.); +#8820 = FACE_BOUND('',#8821,.T.); +#8821 = EDGE_LOOP('',(#8822,#8828,#8829,#8830)); +#8822 = ORIENTED_EDGE('',*,*,#8823,.T.); +#8823 = EDGE_CURVE('',#8632,#8767,#8824,.T.); +#8824 = LINE('',#8825,#8826); +#8825 = CARTESIAN_POINT('',(23.19,-19.914,7.6066)); +#8826 = VECTOR('',#8827,1.); +#8827 = DIRECTION('',(0.,0.,1.)); +#8828 = ORIENTED_EDGE('',*,*,#8774,.T.); +#8829 = ORIENTED_EDGE('',*,*,#8559,.F.); +#8830 = ORIENTED_EDGE('',*,*,#8639,.F.); +#8831 = PLANE('',#8832); +#8832 = AXIS2_PLACEMENT_3D('',#8833,#8834,#8835); +#8833 = CARTESIAN_POINT('',(23.19,-19.914,7.6066)); +#8834 = DIRECTION('',(0.,-1.,0.)); +#8835 = DIRECTION('',(-1.,0.,0.)); +#8836 = ADVANCED_FACE('',(#8837),#8848,.T.); +#8837 = FACE_BOUND('',#8838,.T.); +#8838 = EDGE_LOOP('',(#8839,#8840,#8841,#8847)); +#8839 = ORIENTED_EDGE('',*,*,#8599,.T.); +#8840 = ORIENTED_EDGE('',*,*,#8758,.T.); +#8841 = ORIENTED_EDGE('',*,*,#8842,.F.); +#8842 = EDGE_CURVE('',#8624,#8759,#8843,.T.); +#8843 = LINE('',#8844,#8845); +#8844 = CARTESIAN_POINT('',(23.19,1.19,7.6066)); +#8845 = VECTOR('',#8846,1.); +#8846 = DIRECTION('',(0.,0.,1.)); +#8847 = ORIENTED_EDGE('',*,*,#8623,.F.); +#8848 = PLANE('',#8849); +#8849 = AXIS2_PLACEMENT_3D('',#8850,#8851,#8852); +#8850 = CARTESIAN_POINT('',(15.5,7.72,7.6066)); +#8851 = DIRECTION('',(0.64727429236,0.762257168185,-0.)); +#8852 = DIRECTION('',(0.762257168185,-0.64727429236,0.)); +#8853 = ADVANCED_FACE('',(#8854),#8860,.T.); +#8854 = FACE_BOUND('',#8855,.T.); +#8855 = EDGE_LOOP('',(#8856,#8857,#8858,#8859)); +#8856 = ORIENTED_EDGE('',*,*,#8842,.T.); +#8857 = ORIENTED_EDGE('',*,*,#8766,.T.); +#8858 = ORIENTED_EDGE('',*,*,#8823,.F.); +#8859 = ORIENTED_EDGE('',*,*,#8631,.F.); +#8860 = PLANE('',#8861); +#8861 = AXIS2_PLACEMENT_3D('',#8862,#8863,#8864); +#8862 = CARTESIAN_POINT('',(23.19,1.19,7.6066)); +#8863 = DIRECTION('',(1.,0.,-0.)); +#8864 = DIRECTION('',(0.,-1.,0.)); +#8865 = ADVANCED_FACE('',(#8866),#8891,.T.); +#8866 = FACE_BOUND('',#8867,.T.); +#8867 = EDGE_LOOP('',(#8868,#8878,#8884,#8885)); +#8868 = ORIENTED_EDGE('',*,*,#8869,.F.); +#8869 = EDGE_CURVE('',#8870,#8872,#8874,.T.); +#8870 = VERTEX_POINT('',#8871); +#8871 = CARTESIAN_POINT('',(3.9152,-2.4298,5.3968)); +#8872 = VERTEX_POINT('',#8873); +#8873 = CARTESIAN_POINT('',(15.7262,-2.4298,5.3968)); +#8874 = LINE('',#8875,#8876); +#8875 = CARTESIAN_POINT('',(3.9152,-2.4298,5.3968)); +#8876 = VECTOR('',#8877,1.); +#8877 = DIRECTION('',(1.,0.,-0.)); +#8878 = ORIENTED_EDGE('',*,*,#8879,.T.); +#8879 = EDGE_CURVE('',#8870,#8649,#8880,.T.); +#8880 = LINE('',#8881,#8882); +#8881 = CARTESIAN_POINT('',(3.9152,-2.4298,5.3968)); +#8882 = VECTOR('',#8883,1.); +#8883 = DIRECTION('',(0.,0.,1.)); +#8884 = ORIENTED_EDGE('',*,*,#8648,.T.); +#8885 = ORIENTED_EDGE('',*,*,#8886,.F.); +#8886 = EDGE_CURVE('',#8872,#8651,#8887,.T.); +#8887 = LINE('',#8888,#8889); +#8888 = CARTESIAN_POINT('',(15.7262,-2.4298,5.3968)); +#8889 = VECTOR('',#8890,1.); +#8890 = DIRECTION('',(0.,0.,1.)); +#8891 = PLANE('',#8892); +#8892 = AXIS2_PLACEMENT_3D('',#8893,#8894,#8895); +#8893 = CARTESIAN_POINT('',(3.9152,-2.4298,5.3968)); +#8894 = DIRECTION('',(-0.,1.,0.)); +#8895 = DIRECTION('',(0.,0.,1.)); +#8896 = ADVANCED_FACE('',(#8897),#8915,.T.); +#8897 = FACE_BOUND('',#8898,.T.); +#8898 = EDGE_LOOP('',(#8899,#8907,#8913,#8914)); +#8899 = ORIENTED_EDGE('',*,*,#8900,.F.); +#8900 = EDGE_CURVE('',#8901,#8667,#8903,.T.); +#8901 = VERTEX_POINT('',#8902); +#8902 = CARTESIAN_POINT('',(15.7262,-16.73,5.3968)); +#8903 = LINE('',#8904,#8905); +#8904 = CARTESIAN_POINT('',(15.7262,-16.73,5.3968)); +#8905 = VECTOR('',#8906,1.); +#8906 = DIRECTION('',(0.,0.,1.)); +#8907 = ORIENTED_EDGE('',*,*,#8908,.T.); +#8908 = EDGE_CURVE('',#8901,#8872,#8909,.T.); +#8909 = LINE('',#8910,#8911); +#8910 = CARTESIAN_POINT('',(15.7262,-16.73,5.3968)); +#8911 = VECTOR('',#8912,1.); +#8912 = DIRECTION('',(-0.,1.,0.)); +#8913 = ORIENTED_EDGE('',*,*,#8886,.T.); +#8914 = ORIENTED_EDGE('',*,*,#8674,.F.); +#8915 = PLANE('',#8916); +#8916 = AXIS2_PLACEMENT_3D('',#8917,#8918,#8919); +#8917 = CARTESIAN_POINT('',(15.7262,-16.73,5.3968)); +#8918 = DIRECTION('',(1.,0.,-0.)); +#8919 = DIRECTION('',(0.,0.,1.)); +#8920 = ADVANCED_FACE('',(#8921),#8939,.F.); +#8921 = FACE_BOUND('',#8922,.F.); +#8922 = EDGE_LOOP('',(#8923,#8931,#8937,#8938)); +#8923 = ORIENTED_EDGE('',*,*,#8924,.F.); +#8924 = EDGE_CURVE('',#8925,#8659,#8927,.T.); +#8925 = VERTEX_POINT('',#8926); +#8926 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8927 = LINE('',#8928,#8929); +#8928 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8929 = VECTOR('',#8930,1.); +#8930 = DIRECTION('',(0.,0.,1.)); +#8931 = ORIENTED_EDGE('',*,*,#8932,.T.); +#8932 = EDGE_CURVE('',#8925,#8870,#8933,.T.); +#8933 = LINE('',#8934,#8935); +#8934 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8935 = VECTOR('',#8936,1.); +#8936 = DIRECTION('',(-0.,1.,0.)); +#8937 = ORIENTED_EDGE('',*,*,#8879,.T.); +#8938 = ORIENTED_EDGE('',*,*,#8658,.F.); +#8939 = PLANE('',#8940); +#8940 = AXIS2_PLACEMENT_3D('',#8941,#8942,#8943); +#8941 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8942 = DIRECTION('',(1.,0.,-0.)); +#8943 = DIRECTION('',(0.,0.,1.)); +#8944 = ADVANCED_FACE('',(#8945),#8956,.F.); +#8945 = FACE_BOUND('',#8946,.F.); +#8946 = EDGE_LOOP('',(#8947,#8953,#8954,#8955)); +#8947 = ORIENTED_EDGE('',*,*,#8948,.F.); +#8948 = EDGE_CURVE('',#8925,#8901,#8949,.T.); +#8949 = LINE('',#8950,#8951); +#8950 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8951 = VECTOR('',#8952,1.); +#8952 = DIRECTION('',(1.,0.,-0.)); +#8953 = ORIENTED_EDGE('',*,*,#8924,.T.); +#8954 = ORIENTED_EDGE('',*,*,#8666,.T.); +#8955 = ORIENTED_EDGE('',*,*,#8900,.F.); +#8956 = PLANE('',#8957); +#8957 = AXIS2_PLACEMENT_3D('',#8958,#8959,#8960); +#8958 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#8959 = DIRECTION('',(-0.,1.,0.)); +#8960 = DIRECTION('',(0.,0.,1.)); +#8961 = ADVANCED_FACE('',(#8962),#8987,.T.); +#8962 = FACE_BOUND('',#8963,.T.); +#8963 = EDGE_LOOP('',(#8964,#8974,#8980,#8981)); +#8964 = ORIENTED_EDGE('',*,*,#8965,.F.); +#8965 = EDGE_CURVE('',#8966,#8968,#8970,.T.); +#8966 = VERTEX_POINT('',#8967); +#8967 = CARTESIAN_POINT('',(21.,1.,5.6)); +#8968 = VERTEX_POINT('',#8969); +#8969 = CARTESIAN_POINT('',(23.,1.,5.6)); +#8970 = LINE('',#8971,#8972); +#8971 = CARTESIAN_POINT('',(21.,1.,5.6)); +#8972 = VECTOR('',#8973,1.); +#8973 = DIRECTION('',(1.,0.,-0.)); +#8974 = ORIENTED_EDGE('',*,*,#8975,.T.); +#8975 = EDGE_CURVE('',#8966,#8683,#8976,.T.); +#8976 = LINE('',#8977,#8978); +#8977 = CARTESIAN_POINT('',(21.,1.,5.6)); +#8978 = VECTOR('',#8979,1.); +#8979 = DIRECTION('',(0.,0.,1.)); +#8980 = ORIENTED_EDGE('',*,*,#8682,.T.); +#8981 = ORIENTED_EDGE('',*,*,#8982,.F.); +#8982 = EDGE_CURVE('',#8968,#8685,#8983,.T.); +#8983 = LINE('',#8984,#8985); +#8984 = CARTESIAN_POINT('',(23.,1.,5.6)); +#8985 = VECTOR('',#8986,1.); +#8986 = DIRECTION('',(0.,0.,1.)); +#8987 = PLANE('',#8988); +#8988 = AXIS2_PLACEMENT_3D('',#8989,#8990,#8991); +#8989 = CARTESIAN_POINT('',(21.,1.,5.6)); +#8990 = DIRECTION('',(-0.,1.,0.)); +#8991 = DIRECTION('',(0.,0.,1.)); +#8992 = ADVANCED_FACE('',(#8993),#9011,.T.); +#8993 = FACE_BOUND('',#8994,.T.); +#8994 = EDGE_LOOP('',(#8995,#9003,#9009,#9010)); +#8995 = ORIENTED_EDGE('',*,*,#8996,.F.); +#8996 = EDGE_CURVE('',#8997,#8701,#8999,.T.); +#8997 = VERTEX_POINT('',#8998); +#8998 = CARTESIAN_POINT('',(23.,-19.,5.6)); +#8999 = LINE('',#9000,#9001); +#9000 = CARTESIAN_POINT('',(23.,-19.,5.6)); +#9001 = VECTOR('',#9002,1.); +#9002 = DIRECTION('',(0.,0.,1.)); +#9003 = ORIENTED_EDGE('',*,*,#9004,.T.); +#9004 = EDGE_CURVE('',#8997,#8968,#9005,.T.); +#9005 = LINE('',#9006,#9007); +#9006 = CARTESIAN_POINT('',(23.,-19.,5.6)); +#9007 = VECTOR('',#9008,1.); +#9008 = DIRECTION('',(-0.,1.,0.)); +#9009 = ORIENTED_EDGE('',*,*,#8982,.T.); +#9010 = ORIENTED_EDGE('',*,*,#8708,.F.); +#9011 = PLANE('',#9012); +#9012 = AXIS2_PLACEMENT_3D('',#9013,#9014,#9015); +#9013 = CARTESIAN_POINT('',(23.,-19.,5.6)); +#9014 = DIRECTION('',(1.,0.,-0.)); +#9015 = DIRECTION('',(0.,0.,1.)); +#9016 = ADVANCED_FACE('',(#9017),#9035,.F.); +#9017 = FACE_BOUND('',#9018,.F.); +#9018 = EDGE_LOOP('',(#9019,#9027,#9033,#9034)); +#9019 = ORIENTED_EDGE('',*,*,#9020,.F.); +#9020 = EDGE_CURVE('',#9021,#8997,#9023,.T.); +#9021 = VERTEX_POINT('',#9022); +#9022 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9023 = LINE('',#9024,#9025); +#9024 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9025 = VECTOR('',#9026,1.); +#9026 = DIRECTION('',(1.,0.,-0.)); +#9027 = ORIENTED_EDGE('',*,*,#9028,.T.); +#9028 = EDGE_CURVE('',#9021,#8693,#9029,.T.); +#9029 = LINE('',#9030,#9031); +#9030 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9031 = VECTOR('',#9032,1.); +#9032 = DIRECTION('',(0.,0.,1.)); +#9033 = ORIENTED_EDGE('',*,*,#8700,.T.); +#9034 = ORIENTED_EDGE('',*,*,#8996,.F.); +#9035 = PLANE('',#9036); +#9036 = AXIS2_PLACEMENT_3D('',#9037,#9038,#9039); +#9037 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9038 = DIRECTION('',(-0.,1.,0.)); +#9039 = DIRECTION('',(0.,0.,1.)); +#9040 = ADVANCED_FACE('',(#9041),#9052,.F.); +#9041 = FACE_BOUND('',#9042,.F.); +#9042 = EDGE_LOOP('',(#9043,#9044,#9050,#9051)); +#9043 = ORIENTED_EDGE('',*,*,#9028,.F.); +#9044 = ORIENTED_EDGE('',*,*,#9045,.T.); +#9045 = EDGE_CURVE('',#9021,#8966,#9046,.T.); +#9046 = LINE('',#9047,#9048); +#9047 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9048 = VECTOR('',#9049,1.); +#9049 = DIRECTION('',(-0.,1.,0.)); +#9050 = ORIENTED_EDGE('',*,*,#8975,.T.); +#9051 = ORIENTED_EDGE('',*,*,#8692,.F.); +#9052 = PLANE('',#9053); +#9053 = AXIS2_PLACEMENT_3D('',#9054,#9055,#9056); +#9054 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9055 = DIRECTION('',(1.,0.,-0.)); +#9056 = DIRECTION('',(0.,0.,1.)); +#9057 = ADVANCED_FACE('',(#9058),#9083,.T.); +#9058 = FACE_BOUND('',#9059,.T.); +#9059 = EDGE_LOOP('',(#9060,#9070,#9076,#9077)); +#9060 = ORIENTED_EDGE('',*,*,#9061,.F.); +#9061 = EDGE_CURVE('',#9062,#9064,#9066,.T.); +#9062 = VERTEX_POINT('',#9063); +#9063 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#9064 = VERTEX_POINT('',#9065); +#9065 = CARTESIAN_POINT('',(1.,1.,5.6)); +#9066 = LINE('',#9067,#9068); +#9067 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#9068 = VECTOR('',#9069,1.); +#9069 = DIRECTION('',(1.,0.,-0.)); +#9070 = ORIENTED_EDGE('',*,*,#9071,.T.); +#9071 = EDGE_CURVE('',#9062,#8717,#9072,.T.); +#9072 = LINE('',#9073,#9074); +#9073 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#9074 = VECTOR('',#9075,1.); +#9075 = DIRECTION('',(0.,0.,1.)); +#9076 = ORIENTED_EDGE('',*,*,#8716,.T.); +#9077 = ORIENTED_EDGE('',*,*,#9078,.F.); +#9078 = EDGE_CURVE('',#9064,#8719,#9079,.T.); +#9079 = LINE('',#9080,#9081); +#9080 = CARTESIAN_POINT('',(1.,1.,5.6)); +#9081 = VECTOR('',#9082,1.); +#9082 = DIRECTION('',(0.,0.,1.)); +#9083 = PLANE('',#9084); +#9084 = AXIS2_PLACEMENT_3D('',#9085,#9086,#9087); +#9085 = CARTESIAN_POINT('',(-1.,1.,5.6)); +#9086 = DIRECTION('',(-0.,1.,0.)); +#9087 = DIRECTION('',(0.,0.,1.)); +#9088 = ADVANCED_FACE('',(#9089),#9107,.T.); +#9089 = FACE_BOUND('',#9090,.T.); +#9090 = EDGE_LOOP('',(#9091,#9099,#9105,#9106)); +#9091 = ORIENTED_EDGE('',*,*,#9092,.F.); +#9092 = EDGE_CURVE('',#9093,#8735,#9095,.T.); +#9093 = VERTEX_POINT('',#9094); +#9094 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#9095 = LINE('',#9096,#9097); +#9096 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#9097 = VECTOR('',#9098,1.); +#9098 = DIRECTION('',(0.,0.,1.)); +#9099 = ORIENTED_EDGE('',*,*,#9100,.T.); +#9100 = EDGE_CURVE('',#9093,#9064,#9101,.T.); +#9101 = LINE('',#9102,#9103); +#9102 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#9103 = VECTOR('',#9104,1.); +#9104 = DIRECTION('',(-0.,1.,0.)); +#9105 = ORIENTED_EDGE('',*,*,#9078,.T.); +#9106 = ORIENTED_EDGE('',*,*,#8742,.F.); +#9107 = PLANE('',#9108); +#9108 = AXIS2_PLACEMENT_3D('',#9109,#9110,#9111); +#9109 = CARTESIAN_POINT('',(1.,-19.,5.6)); +#9110 = DIRECTION('',(1.,0.,-0.)); +#9111 = DIRECTION('',(0.,0.,1.)); +#9112 = ADVANCED_FACE('',(#9113),#9131,.F.); +#9113 = FACE_BOUND('',#9114,.F.); +#9114 = EDGE_LOOP('',(#9115,#9123,#9129,#9130)); +#9115 = ORIENTED_EDGE('',*,*,#9116,.F.); +#9116 = EDGE_CURVE('',#9117,#8727,#9119,.T.); +#9117 = VERTEX_POINT('',#9118); +#9118 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9119 = LINE('',#9120,#9121); +#9120 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9121 = VECTOR('',#9122,1.); +#9122 = DIRECTION('',(0.,0.,1.)); +#9123 = ORIENTED_EDGE('',*,*,#9124,.T.); +#9124 = EDGE_CURVE('',#9117,#9062,#9125,.T.); +#9125 = LINE('',#9126,#9127); +#9126 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9127 = VECTOR('',#9128,1.); +#9128 = DIRECTION('',(-0.,1.,0.)); +#9129 = ORIENTED_EDGE('',*,*,#9071,.T.); +#9130 = ORIENTED_EDGE('',*,*,#8726,.F.); +#9131 = PLANE('',#9132); +#9132 = AXIS2_PLACEMENT_3D('',#9133,#9134,#9135); +#9133 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9134 = DIRECTION('',(1.,0.,-0.)); +#9135 = DIRECTION('',(0.,0.,1.)); +#9136 = ADVANCED_FACE('',(#9137),#9148,.F.); +#9137 = FACE_BOUND('',#9138,.F.); +#9138 = EDGE_LOOP('',(#9139,#9145,#9146,#9147)); +#9139 = ORIENTED_EDGE('',*,*,#9140,.F.); +#9140 = EDGE_CURVE('',#9117,#9093,#9141,.T.); +#9141 = LINE('',#9142,#9143); +#9142 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9143 = VECTOR('',#9144,1.); +#9144 = DIRECTION('',(1.,0.,-0.)); +#9145 = ORIENTED_EDGE('',*,*,#9116,.T.); +#9146 = ORIENTED_EDGE('',*,*,#8734,.T.); +#9147 = ORIENTED_EDGE('',*,*,#9092,.F.); +#9148 = PLANE('',#9149); +#9149 = AXIS2_PLACEMENT_3D('',#9150,#9151,#9152); +#9150 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9151 = DIRECTION('',(-0.,1.,0.)); +#9152 = DIRECTION('',(0.,0.,1.)); +#9153 = ADVANCED_FACE('',(#9154),#9179,.T.); +#9154 = FACE_BOUND('',#9155,.T.); +#9155 = EDGE_LOOP('',(#9156,#9157,#9165,#9173)); +#9156 = ORIENTED_EDGE('',*,*,#8783,.F.); +#9157 = ORIENTED_EDGE('',*,*,#9158,.T.); +#9158 = EDGE_CURVE('',#8784,#9159,#9161,.T.); +#9159 = VERTEX_POINT('',#9160); +#9160 = CARTESIAN_POINT('',(9.5,3.6326,9.6386)); +#9161 = LINE('',#9162,#9163); +#9162 = CARTESIAN_POINT('',(9.5,3.6326,8.394)); +#9163 = VECTOR('',#9164,1.); +#9164 = DIRECTION('',(0.,0.,1.)); +#9165 = ORIENTED_EDGE('',*,*,#9166,.T.); +#9166 = EDGE_CURVE('',#9159,#9167,#9169,.T.); +#9167 = VERTEX_POINT('',#9168); +#9168 = CARTESIAN_POINT('',(12.5,3.6326,9.6386)); +#9169 = LINE('',#9170,#9171); +#9170 = CARTESIAN_POINT('',(9.5,3.6326,9.6386)); +#9171 = VECTOR('',#9172,1.); +#9172 = DIRECTION('',(1.,0.,-0.)); +#9173 = ORIENTED_EDGE('',*,*,#9174,.F.); +#9174 = EDGE_CURVE('',#8786,#9167,#9175,.T.); +#9175 = LINE('',#9176,#9177); +#9176 = CARTESIAN_POINT('',(12.5,3.6326,8.394)); +#9177 = VECTOR('',#9178,1.); +#9178 = DIRECTION('',(0.,0.,1.)); +#9179 = PLANE('',#9180); +#9180 = AXIS2_PLACEMENT_3D('',#9181,#9182,#9183); +#9181 = CARTESIAN_POINT('',(9.5,3.6326,8.394)); +#9182 = DIRECTION('',(-0.,1.,0.)); +#9183 = DIRECTION('',(0.,0.,1.)); +#9184 = ADVANCED_FACE('',(#9185),#9203,.T.); +#9185 = FACE_BOUND('',#9186,.T.); +#9186 = EDGE_LOOP('',(#9187,#9195,#9196,#9197)); +#9187 = ORIENTED_EDGE('',*,*,#9188,.F.); +#9188 = EDGE_CURVE('',#8802,#9189,#9191,.T.); +#9189 = VERTEX_POINT('',#9190); +#9190 = CARTESIAN_POINT('',(12.5,0.6326,9.6386)); +#9191 = LINE('',#9192,#9193); +#9192 = CARTESIAN_POINT('',(12.5,0.6326,8.394)); +#9193 = VECTOR('',#9194,1.); +#9194 = DIRECTION('',(0.,0.,1.)); +#9195 = ORIENTED_EDGE('',*,*,#8809,.T.); +#9196 = ORIENTED_EDGE('',*,*,#9174,.T.); +#9197 = ORIENTED_EDGE('',*,*,#9198,.F.); +#9198 = EDGE_CURVE('',#9189,#9167,#9199,.T.); +#9199 = LINE('',#9200,#9201); +#9200 = CARTESIAN_POINT('',(12.5,0.6326,9.6386)); +#9201 = VECTOR('',#9202,1.); +#9202 = DIRECTION('',(-0.,1.,0.)); +#9203 = PLANE('',#9204); +#9204 = AXIS2_PLACEMENT_3D('',#9205,#9206,#9207); +#9205 = CARTESIAN_POINT('',(12.5,0.6326,8.394)); +#9206 = DIRECTION('',(1.,0.,-0.)); +#9207 = DIRECTION('',(0.,0.,1.)); +#9208 = ADVANCED_FACE('',(#9209),#9227,.F.); +#9209 = FACE_BOUND('',#9210,.F.); +#9210 = EDGE_LOOP('',(#9211,#9212,#9220,#9226)); +#9211 = ORIENTED_EDGE('',*,*,#8801,.F.); +#9212 = ORIENTED_EDGE('',*,*,#9213,.T.); +#9213 = EDGE_CURVE('',#8794,#9214,#9216,.T.); +#9214 = VERTEX_POINT('',#9215); +#9215 = CARTESIAN_POINT('',(9.5,0.6326,9.6386)); +#9216 = LINE('',#9217,#9218); +#9217 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#9218 = VECTOR('',#9219,1.); +#9219 = DIRECTION('',(0.,0.,1.)); +#9220 = ORIENTED_EDGE('',*,*,#9221,.T.); +#9221 = EDGE_CURVE('',#9214,#9189,#9222,.T.); +#9222 = LINE('',#9223,#9224); +#9223 = CARTESIAN_POINT('',(9.5,0.6326,9.6386)); +#9224 = VECTOR('',#9225,1.); +#9225 = DIRECTION('',(1.,0.,-0.)); +#9226 = ORIENTED_EDGE('',*,*,#9188,.F.); +#9227 = PLANE('',#9228); +#9228 = AXIS2_PLACEMENT_3D('',#9229,#9230,#9231); +#9229 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#9230 = DIRECTION('',(-0.,1.,0.)); +#9231 = DIRECTION('',(0.,0.,1.)); +#9232 = ADVANCED_FACE('',(#9233),#9244,.F.); +#9233 = FACE_BOUND('',#9234,.F.); +#9234 = EDGE_LOOP('',(#9235,#9236,#9237,#9238)); +#9235 = ORIENTED_EDGE('',*,*,#9213,.F.); +#9236 = ORIENTED_EDGE('',*,*,#8793,.T.); +#9237 = ORIENTED_EDGE('',*,*,#9158,.T.); +#9238 = ORIENTED_EDGE('',*,*,#9239,.F.); +#9239 = EDGE_CURVE('',#9214,#9159,#9240,.T.); +#9240 = LINE('',#9241,#9242); +#9241 = CARTESIAN_POINT('',(9.5,0.6326,9.6386)); +#9242 = VECTOR('',#9243,1.); +#9243 = DIRECTION('',(-0.,1.,0.)); +#9244 = PLANE('',#9245); +#9245 = AXIS2_PLACEMENT_3D('',#9246,#9247,#9248); +#9246 = CARTESIAN_POINT('',(9.5,0.6326,8.394)); +#9247 = DIRECTION('',(1.,0.,-0.)); +#9248 = DIRECTION('',(0.,0.,1.)); +#9249 = ADVANCED_FACE('',(#9250),#9256,.F.); +#9250 = FACE_BOUND('',#9251,.F.); +#9251 = EDGE_LOOP('',(#9252,#9253,#9254,#9255)); +#9252 = ORIENTED_EDGE('',*,*,#8932,.F.); +#9253 = ORIENTED_EDGE('',*,*,#8948,.T.); +#9254 = ORIENTED_EDGE('',*,*,#8908,.T.); +#9255 = ORIENTED_EDGE('',*,*,#8869,.F.); +#9256 = PLANE('',#9257); +#9257 = AXIS2_PLACEMENT_3D('',#9258,#9259,#9260); +#9258 = CARTESIAN_POINT('',(3.9152,-16.73,5.3968)); +#9259 = DIRECTION('',(0.,0.,1.)); +#9260 = DIRECTION('',(1.,0.,-0.)); +#9261 = ADVANCED_FACE('',(#9262,#9268,#9302,#9336,#9370,#9404,#9438, + #9472,#9506,#9540,#9574),#9608,.F.); +#9262 = FACE_BOUND('',#9263,.F.); +#9263 = EDGE_LOOP('',(#9264,#9265,#9266,#9267)); +#9264 = ORIENTED_EDGE('',*,*,#9045,.F.); +#9265 = ORIENTED_EDGE('',*,*,#9020,.T.); +#9266 = ORIENTED_EDGE('',*,*,#9004,.T.); +#9267 = ORIENTED_EDGE('',*,*,#8965,.F.); +#9268 = FACE_BOUND('',#9269,.F.); +#9269 = EDGE_LOOP('',(#9270,#9280,#9288,#9296)); +#9270 = ORIENTED_EDGE('',*,*,#9271,.T.); +#9271 = EDGE_CURVE('',#9272,#9274,#9276,.T.); +#9272 = VERTEX_POINT('',#9273); +#9273 = CARTESIAN_POINT('',(21.75,-18.25,5.6)); +#9274 = VERTEX_POINT('',#9275); +#9275 = CARTESIAN_POINT('',(21.75,-17.75,5.6)); +#9276 = LINE('',#9277,#9278); +#9277 = CARTESIAN_POINT('',(21.75,-18.25,5.6)); +#9278 = VECTOR('',#9279,1.); +#9279 = DIRECTION('',(-0.,1.,0.)); +#9280 = ORIENTED_EDGE('',*,*,#9281,.T.); +#9281 = EDGE_CURVE('',#9274,#9282,#9284,.T.); +#9282 = VERTEX_POINT('',#9283); +#9283 = CARTESIAN_POINT('',(22.25,-17.75,5.6)); +#9284 = LINE('',#9285,#9286); +#9285 = CARTESIAN_POINT('',(21.75,-17.75,5.6)); +#9286 = VECTOR('',#9287,1.); +#9287 = DIRECTION('',(1.,0.,-0.)); +#9288 = ORIENTED_EDGE('',*,*,#9289,.F.); +#9289 = EDGE_CURVE('',#9290,#9282,#9292,.T.); +#9290 = VERTEX_POINT('',#9291); +#9291 = CARTESIAN_POINT('',(22.25,-18.25,5.6)); +#9292 = LINE('',#9293,#9294); +#9293 = CARTESIAN_POINT('',(22.25,-18.25,5.6)); +#9294 = VECTOR('',#9295,1.); +#9295 = DIRECTION('',(-0.,1.,0.)); +#9296 = ORIENTED_EDGE('',*,*,#9297,.F.); +#9297 = EDGE_CURVE('',#9272,#9290,#9298,.T.); +#9298 = LINE('',#9299,#9300); +#9299 = CARTESIAN_POINT('',(21.75,-18.25,5.6)); +#9300 = VECTOR('',#9301,1.); +#9301 = DIRECTION('',(1.,0.,-0.)); +#9302 = FACE_BOUND('',#9303,.F.); +#9303 = EDGE_LOOP('',(#9304,#9314,#9322,#9330)); +#9304 = ORIENTED_EDGE('',*,*,#9305,.T.); +#9305 = EDGE_CURVE('',#9306,#9308,#9310,.T.); +#9306 = VERTEX_POINT('',#9307); +#9307 = CARTESIAN_POINT('',(21.75,-16.25,5.6)); +#9308 = VERTEX_POINT('',#9309); +#9309 = CARTESIAN_POINT('',(21.75,-15.75,5.6)); +#9310 = LINE('',#9311,#9312); +#9311 = CARTESIAN_POINT('',(21.75,-16.25,5.6)); +#9312 = VECTOR('',#9313,1.); +#9313 = DIRECTION('',(-0.,1.,0.)); +#9314 = ORIENTED_EDGE('',*,*,#9315,.T.); +#9315 = EDGE_CURVE('',#9308,#9316,#9318,.T.); +#9316 = VERTEX_POINT('',#9317); +#9317 = CARTESIAN_POINT('',(22.25,-15.75,5.6)); +#9318 = LINE('',#9319,#9320); +#9319 = CARTESIAN_POINT('',(21.75,-15.75,5.6)); +#9320 = VECTOR('',#9321,1.); +#9321 = DIRECTION('',(1.,0.,-0.)); +#9322 = ORIENTED_EDGE('',*,*,#9323,.F.); +#9323 = EDGE_CURVE('',#9324,#9316,#9326,.T.); +#9324 = VERTEX_POINT('',#9325); +#9325 = CARTESIAN_POINT('',(22.25,-16.25,5.6)); +#9326 = LINE('',#9327,#9328); +#9327 = CARTESIAN_POINT('',(22.25,-16.25,5.6)); +#9328 = VECTOR('',#9329,1.); +#9329 = DIRECTION('',(-0.,1.,0.)); +#9330 = ORIENTED_EDGE('',*,*,#9331,.F.); +#9331 = EDGE_CURVE('',#9306,#9324,#9332,.T.); +#9332 = LINE('',#9333,#9334); +#9333 = CARTESIAN_POINT('',(21.75,-16.25,5.6)); +#9334 = VECTOR('',#9335,1.); +#9335 = DIRECTION('',(1.,0.,-0.)); +#9336 = FACE_BOUND('',#9337,.F.); +#9337 = EDGE_LOOP('',(#9338,#9348,#9356,#9364)); +#9338 = ORIENTED_EDGE('',*,*,#9339,.T.); +#9339 = EDGE_CURVE('',#9340,#9342,#9344,.T.); +#9340 = VERTEX_POINT('',#9341); +#9341 = CARTESIAN_POINT('',(21.75,-14.25,5.6)); +#9342 = VERTEX_POINT('',#9343); +#9343 = CARTESIAN_POINT('',(21.75,-13.75,5.6)); +#9344 = LINE('',#9345,#9346); +#9345 = CARTESIAN_POINT('',(21.75,-14.25,5.6)); +#9346 = VECTOR('',#9347,1.); +#9347 = DIRECTION('',(-0.,1.,0.)); +#9348 = ORIENTED_EDGE('',*,*,#9349,.T.); +#9349 = EDGE_CURVE('',#9342,#9350,#9352,.T.); +#9350 = VERTEX_POINT('',#9351); +#9351 = CARTESIAN_POINT('',(22.25,-13.75,5.6)); +#9352 = LINE('',#9353,#9354); +#9353 = CARTESIAN_POINT('',(21.75,-13.75,5.6)); +#9354 = VECTOR('',#9355,1.); +#9355 = DIRECTION('',(1.,0.,-0.)); +#9356 = ORIENTED_EDGE('',*,*,#9357,.F.); +#9357 = EDGE_CURVE('',#9358,#9350,#9360,.T.); +#9358 = VERTEX_POINT('',#9359); +#9359 = CARTESIAN_POINT('',(22.25,-14.25,5.6)); +#9360 = LINE('',#9361,#9362); +#9361 = CARTESIAN_POINT('',(22.25,-14.25,5.6)); +#9362 = VECTOR('',#9363,1.); +#9363 = DIRECTION('',(-0.,1.,0.)); +#9364 = ORIENTED_EDGE('',*,*,#9365,.F.); +#9365 = EDGE_CURVE('',#9340,#9358,#9366,.T.); +#9366 = LINE('',#9367,#9368); +#9367 = CARTESIAN_POINT('',(21.75,-14.25,5.6)); +#9368 = VECTOR('',#9369,1.); +#9369 = DIRECTION('',(1.,0.,-0.)); +#9370 = FACE_BOUND('',#9371,.F.); +#9371 = EDGE_LOOP('',(#9372,#9382,#9390,#9398)); +#9372 = ORIENTED_EDGE('',*,*,#9373,.T.); +#9373 = EDGE_CURVE('',#9374,#9376,#9378,.T.); +#9374 = VERTEX_POINT('',#9375); +#9375 = CARTESIAN_POINT('',(21.75,-12.25,5.6)); +#9376 = VERTEX_POINT('',#9377); +#9377 = CARTESIAN_POINT('',(21.75,-11.75,5.6)); +#9378 = LINE('',#9379,#9380); +#9379 = CARTESIAN_POINT('',(21.75,-12.25,5.6)); +#9380 = VECTOR('',#9381,1.); +#9381 = DIRECTION('',(-0.,1.,0.)); +#9382 = ORIENTED_EDGE('',*,*,#9383,.T.); +#9383 = EDGE_CURVE('',#9376,#9384,#9386,.T.); +#9384 = VERTEX_POINT('',#9385); +#9385 = CARTESIAN_POINT('',(22.25,-11.75,5.6)); +#9386 = LINE('',#9387,#9388); +#9387 = CARTESIAN_POINT('',(21.75,-11.75,5.6)); +#9388 = VECTOR('',#9389,1.); +#9389 = DIRECTION('',(1.,0.,-0.)); +#9390 = ORIENTED_EDGE('',*,*,#9391,.F.); +#9391 = EDGE_CURVE('',#9392,#9384,#9394,.T.); +#9392 = VERTEX_POINT('',#9393); +#9393 = CARTESIAN_POINT('',(22.25,-12.25,5.6)); +#9394 = LINE('',#9395,#9396); +#9395 = CARTESIAN_POINT('',(22.25,-12.25,5.6)); +#9396 = VECTOR('',#9397,1.); +#9397 = DIRECTION('',(-0.,1.,0.)); +#9398 = ORIENTED_EDGE('',*,*,#9399,.F.); +#9399 = EDGE_CURVE('',#9374,#9392,#9400,.T.); +#9400 = LINE('',#9401,#9402); +#9401 = CARTESIAN_POINT('',(21.75,-12.25,5.6)); +#9402 = VECTOR('',#9403,1.); +#9403 = DIRECTION('',(1.,0.,-0.)); +#9404 = FACE_BOUND('',#9405,.F.); +#9405 = EDGE_LOOP('',(#9406,#9416,#9424,#9432)); +#9406 = ORIENTED_EDGE('',*,*,#9407,.T.); +#9407 = EDGE_CURVE('',#9408,#9410,#9412,.T.); +#9408 = VERTEX_POINT('',#9409); +#9409 = CARTESIAN_POINT('',(21.75,-10.25,5.6)); +#9410 = VERTEX_POINT('',#9411); +#9411 = CARTESIAN_POINT('',(21.75,-9.75,5.6)); +#9412 = LINE('',#9413,#9414); +#9413 = CARTESIAN_POINT('',(21.75,-10.25,5.6)); +#9414 = VECTOR('',#9415,1.); +#9415 = DIRECTION('',(-0.,1.,0.)); +#9416 = ORIENTED_EDGE('',*,*,#9417,.T.); +#9417 = EDGE_CURVE('',#9410,#9418,#9420,.T.); +#9418 = VERTEX_POINT('',#9419); +#9419 = CARTESIAN_POINT('',(22.25,-9.75,5.6)); +#9420 = LINE('',#9421,#9422); +#9421 = CARTESIAN_POINT('',(21.75,-9.75,5.6)); +#9422 = VECTOR('',#9423,1.); +#9423 = DIRECTION('',(1.,0.,-0.)); +#9424 = ORIENTED_EDGE('',*,*,#9425,.F.); +#9425 = EDGE_CURVE('',#9426,#9418,#9428,.T.); +#9426 = VERTEX_POINT('',#9427); +#9427 = CARTESIAN_POINT('',(22.25,-10.25,5.6)); +#9428 = LINE('',#9429,#9430); +#9429 = CARTESIAN_POINT('',(22.25,-10.25,5.6)); +#9430 = VECTOR('',#9431,1.); +#9431 = DIRECTION('',(-0.,1.,0.)); +#9432 = ORIENTED_EDGE('',*,*,#9433,.F.); +#9433 = EDGE_CURVE('',#9408,#9426,#9434,.T.); +#9434 = LINE('',#9435,#9436); +#9435 = CARTESIAN_POINT('',(21.75,-10.25,5.6)); +#9436 = VECTOR('',#9437,1.); +#9437 = DIRECTION('',(1.,0.,-0.)); +#9438 = FACE_BOUND('',#9439,.F.); +#9439 = EDGE_LOOP('',(#9440,#9450,#9458,#9466)); +#9440 = ORIENTED_EDGE('',*,*,#9441,.T.); +#9441 = EDGE_CURVE('',#9442,#9444,#9446,.T.); +#9442 = VERTEX_POINT('',#9443); +#9443 = CARTESIAN_POINT('',(21.75,-8.25,5.6)); +#9444 = VERTEX_POINT('',#9445); +#9445 = CARTESIAN_POINT('',(21.75,-7.75,5.6)); +#9446 = LINE('',#9447,#9448); +#9447 = CARTESIAN_POINT('',(21.75,-8.25,5.6)); +#9448 = VECTOR('',#9449,1.); +#9449 = DIRECTION('',(-0.,1.,0.)); +#9450 = ORIENTED_EDGE('',*,*,#9451,.T.); +#9451 = EDGE_CURVE('',#9444,#9452,#9454,.T.); +#9452 = VERTEX_POINT('',#9453); +#9453 = CARTESIAN_POINT('',(22.25,-7.75,5.6)); +#9454 = LINE('',#9455,#9456); +#9455 = CARTESIAN_POINT('',(21.75,-7.75,5.6)); +#9456 = VECTOR('',#9457,1.); +#9457 = DIRECTION('',(1.,0.,-0.)); +#9458 = ORIENTED_EDGE('',*,*,#9459,.F.); +#9459 = EDGE_CURVE('',#9460,#9452,#9462,.T.); +#9460 = VERTEX_POINT('',#9461); +#9461 = CARTESIAN_POINT('',(22.25,-8.25,5.6)); +#9462 = LINE('',#9463,#9464); +#9463 = CARTESIAN_POINT('',(22.25,-8.25,5.6)); +#9464 = VECTOR('',#9465,1.); +#9465 = DIRECTION('',(-0.,1.,0.)); +#9466 = ORIENTED_EDGE('',*,*,#9467,.F.); +#9467 = EDGE_CURVE('',#9442,#9460,#9468,.T.); +#9468 = LINE('',#9469,#9470); +#9469 = CARTESIAN_POINT('',(21.75,-8.25,5.6)); +#9470 = VECTOR('',#9471,1.); +#9471 = DIRECTION('',(1.,0.,-0.)); +#9472 = FACE_BOUND('',#9473,.F.); +#9473 = EDGE_LOOP('',(#9474,#9484,#9492,#9500)); +#9474 = ORIENTED_EDGE('',*,*,#9475,.T.); +#9475 = EDGE_CURVE('',#9476,#9478,#9480,.T.); +#9476 = VERTEX_POINT('',#9477); +#9477 = CARTESIAN_POINT('',(21.75,-6.25,5.6)); +#9478 = VERTEX_POINT('',#9479); +#9479 = CARTESIAN_POINT('',(21.75,-5.75,5.6)); +#9480 = LINE('',#9481,#9482); +#9481 = CARTESIAN_POINT('',(21.75,-6.25,5.6)); +#9482 = VECTOR('',#9483,1.); +#9483 = DIRECTION('',(-0.,1.,0.)); +#9484 = ORIENTED_EDGE('',*,*,#9485,.T.); +#9485 = EDGE_CURVE('',#9478,#9486,#9488,.T.); +#9486 = VERTEX_POINT('',#9487); +#9487 = CARTESIAN_POINT('',(22.25,-5.75,5.6)); +#9488 = LINE('',#9489,#9490); +#9489 = CARTESIAN_POINT('',(21.75,-5.75,5.6)); +#9490 = VECTOR('',#9491,1.); +#9491 = DIRECTION('',(1.,0.,-0.)); +#9492 = ORIENTED_EDGE('',*,*,#9493,.F.); +#9493 = EDGE_CURVE('',#9494,#9486,#9496,.T.); +#9494 = VERTEX_POINT('',#9495); +#9495 = CARTESIAN_POINT('',(22.25,-6.25,5.6)); +#9496 = LINE('',#9497,#9498); +#9497 = CARTESIAN_POINT('',(22.25,-6.25,5.6)); +#9498 = VECTOR('',#9499,1.); +#9499 = DIRECTION('',(-0.,1.,0.)); +#9500 = ORIENTED_EDGE('',*,*,#9501,.F.); +#9501 = EDGE_CURVE('',#9476,#9494,#9502,.T.); +#9502 = LINE('',#9503,#9504); +#9503 = CARTESIAN_POINT('',(21.75,-6.25,5.6)); +#9504 = VECTOR('',#9505,1.); +#9505 = DIRECTION('',(1.,0.,-0.)); +#9506 = FACE_BOUND('',#9507,.F.); +#9507 = EDGE_LOOP('',(#9508,#9518,#9526,#9534)); +#9508 = ORIENTED_EDGE('',*,*,#9509,.T.); +#9509 = EDGE_CURVE('',#9510,#9512,#9514,.T.); +#9510 = VERTEX_POINT('',#9511); +#9511 = CARTESIAN_POINT('',(21.75,-4.25,5.6)); +#9512 = VERTEX_POINT('',#9513); +#9513 = CARTESIAN_POINT('',(21.75,-3.75,5.6)); +#9514 = LINE('',#9515,#9516); +#9515 = CARTESIAN_POINT('',(21.75,-4.25,5.6)); +#9516 = VECTOR('',#9517,1.); +#9517 = DIRECTION('',(-0.,1.,0.)); +#9518 = ORIENTED_EDGE('',*,*,#9519,.T.); +#9519 = EDGE_CURVE('',#9512,#9520,#9522,.T.); +#9520 = VERTEX_POINT('',#9521); +#9521 = CARTESIAN_POINT('',(22.25,-3.75,5.6)); +#9522 = LINE('',#9523,#9524); +#9523 = CARTESIAN_POINT('',(21.75,-3.75,5.6)); +#9524 = VECTOR('',#9525,1.); +#9525 = DIRECTION('',(1.,0.,-0.)); +#9526 = ORIENTED_EDGE('',*,*,#9527,.F.); +#9527 = EDGE_CURVE('',#9528,#9520,#9530,.T.); +#9528 = VERTEX_POINT('',#9529); +#9529 = CARTESIAN_POINT('',(22.25,-4.25,5.6)); +#9530 = LINE('',#9531,#9532); +#9531 = CARTESIAN_POINT('',(22.25,-4.25,5.6)); +#9532 = VECTOR('',#9533,1.); +#9533 = DIRECTION('',(-0.,1.,0.)); +#9534 = ORIENTED_EDGE('',*,*,#9535,.F.); +#9535 = EDGE_CURVE('',#9510,#9528,#9536,.T.); +#9536 = LINE('',#9537,#9538); +#9537 = CARTESIAN_POINT('',(21.75,-4.25,5.6)); +#9538 = VECTOR('',#9539,1.); +#9539 = DIRECTION('',(1.,0.,-0.)); +#9540 = FACE_BOUND('',#9541,.F.); +#9541 = EDGE_LOOP('',(#9542,#9552,#9560,#9568)); +#9542 = ORIENTED_EDGE('',*,*,#9543,.T.); +#9543 = EDGE_CURVE('',#9544,#9546,#9548,.T.); +#9544 = VERTEX_POINT('',#9545); +#9545 = CARTESIAN_POINT('',(21.75,-2.25,5.6)); +#9546 = VERTEX_POINT('',#9547); +#9547 = CARTESIAN_POINT('',(21.75,-1.75,5.6)); +#9548 = LINE('',#9549,#9550); +#9549 = CARTESIAN_POINT('',(21.75,-2.25,5.6)); +#9550 = VECTOR('',#9551,1.); +#9551 = DIRECTION('',(-0.,1.,0.)); +#9552 = ORIENTED_EDGE('',*,*,#9553,.T.); +#9553 = EDGE_CURVE('',#9546,#9554,#9556,.T.); +#9554 = VERTEX_POINT('',#9555); +#9555 = CARTESIAN_POINT('',(22.25,-1.75,5.6)); +#9556 = LINE('',#9557,#9558); +#9557 = CARTESIAN_POINT('',(21.75,-1.75,5.6)); +#9558 = VECTOR('',#9559,1.); +#9559 = DIRECTION('',(1.,0.,-0.)); +#9560 = ORIENTED_EDGE('',*,*,#9561,.F.); +#9561 = EDGE_CURVE('',#9562,#9554,#9564,.T.); +#9562 = VERTEX_POINT('',#9563); +#9563 = CARTESIAN_POINT('',(22.25,-2.25,5.6)); +#9564 = LINE('',#9565,#9566); +#9565 = CARTESIAN_POINT('',(22.25,-2.25,5.6)); +#9566 = VECTOR('',#9567,1.); +#9567 = DIRECTION('',(-0.,1.,0.)); +#9568 = ORIENTED_EDGE('',*,*,#9569,.F.); +#9569 = EDGE_CURVE('',#9544,#9562,#9570,.T.); +#9570 = LINE('',#9571,#9572); +#9571 = CARTESIAN_POINT('',(21.75,-2.25,5.6)); +#9572 = VECTOR('',#9573,1.); +#9573 = DIRECTION('',(1.,0.,-0.)); +#9574 = FACE_BOUND('',#9575,.F.); +#9575 = EDGE_LOOP('',(#9576,#9586,#9594,#9602)); +#9576 = ORIENTED_EDGE('',*,*,#9577,.T.); +#9577 = EDGE_CURVE('',#9578,#9580,#9582,.T.); +#9578 = VERTEX_POINT('',#9579); +#9579 = CARTESIAN_POINT('',(21.75,-0.25,5.6)); +#9580 = VERTEX_POINT('',#9581); +#9581 = CARTESIAN_POINT('',(21.75,0.25,5.6)); +#9582 = LINE('',#9583,#9584); +#9583 = CARTESIAN_POINT('',(21.75,-0.25,5.6)); +#9584 = VECTOR('',#9585,1.); +#9585 = DIRECTION('',(-0.,1.,0.)); +#9586 = ORIENTED_EDGE('',*,*,#9587,.T.); +#9587 = EDGE_CURVE('',#9580,#9588,#9590,.T.); +#9588 = VERTEX_POINT('',#9589); +#9589 = CARTESIAN_POINT('',(22.25,0.25,5.6)); +#9590 = LINE('',#9591,#9592); +#9591 = CARTESIAN_POINT('',(21.75,0.25,5.6)); +#9592 = VECTOR('',#9593,1.); +#9593 = DIRECTION('',(1.,0.,-0.)); +#9594 = ORIENTED_EDGE('',*,*,#9595,.F.); +#9595 = EDGE_CURVE('',#9596,#9588,#9598,.T.); +#9596 = VERTEX_POINT('',#9597); +#9597 = CARTESIAN_POINT('',(22.25,-0.25,5.6)); +#9598 = LINE('',#9599,#9600); +#9599 = CARTESIAN_POINT('',(22.25,-0.25,5.6)); +#9600 = VECTOR('',#9601,1.); +#9601 = DIRECTION('',(-0.,1.,0.)); +#9602 = ORIENTED_EDGE('',*,*,#9603,.F.); +#9603 = EDGE_CURVE('',#9578,#9596,#9604,.T.); +#9604 = LINE('',#9605,#9606); +#9605 = CARTESIAN_POINT('',(21.75,-0.25,5.6)); +#9606 = VECTOR('',#9607,1.); +#9607 = DIRECTION('',(1.,0.,-0.)); +#9608 = PLANE('',#9609); +#9609 = AXIS2_PLACEMENT_3D('',#9610,#9611,#9612); +#9610 = CARTESIAN_POINT('',(21.,-19.,5.6)); +#9611 = DIRECTION('',(0.,0.,1.)); +#9612 = DIRECTION('',(1.,0.,-0.)); +#9613 = ADVANCED_FACE('',(#9614,#9620,#9654,#9688,#9722,#9756,#9790, + #9824,#9858,#9892,#9926),#9960,.F.); +#9614 = FACE_BOUND('',#9615,.F.); +#9615 = EDGE_LOOP('',(#9616,#9617,#9618,#9619)); +#9616 = ORIENTED_EDGE('',*,*,#9124,.F.); +#9617 = ORIENTED_EDGE('',*,*,#9140,.T.); +#9618 = ORIENTED_EDGE('',*,*,#9100,.T.); +#9619 = ORIENTED_EDGE('',*,*,#9061,.F.); +#9620 = FACE_BOUND('',#9621,.F.); +#9621 = EDGE_LOOP('',(#9622,#9632,#9640,#9648)); +#9622 = ORIENTED_EDGE('',*,*,#9623,.T.); +#9623 = EDGE_CURVE('',#9624,#9626,#9628,.T.); +#9624 = VERTEX_POINT('',#9625); +#9625 = CARTESIAN_POINT('',(-0.25,-18.25,5.6)); +#9626 = VERTEX_POINT('',#9627); +#9627 = CARTESIAN_POINT('',(-0.25,-17.75,5.6)); +#9628 = LINE('',#9629,#9630); +#9629 = CARTESIAN_POINT('',(-0.25,-18.25,5.6)); +#9630 = VECTOR('',#9631,1.); +#9631 = DIRECTION('',(-0.,1.,0.)); +#9632 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9633 = EDGE_CURVE('',#9626,#9634,#9636,.T.); +#9634 = VERTEX_POINT('',#9635); +#9635 = CARTESIAN_POINT('',(0.25,-17.75,5.6)); +#9636 = LINE('',#9637,#9638); +#9637 = CARTESIAN_POINT('',(-0.25,-17.75,5.6)); +#9638 = VECTOR('',#9639,1.); +#9639 = DIRECTION('',(1.,0.,-0.)); +#9640 = ORIENTED_EDGE('',*,*,#9641,.F.); +#9641 = EDGE_CURVE('',#9642,#9634,#9644,.T.); +#9642 = VERTEX_POINT('',#9643); +#9643 = CARTESIAN_POINT('',(0.25,-18.25,5.6)); +#9644 = LINE('',#9645,#9646); +#9645 = CARTESIAN_POINT('',(0.25,-18.25,5.6)); +#9646 = VECTOR('',#9647,1.); +#9647 = DIRECTION('',(-0.,1.,0.)); +#9648 = ORIENTED_EDGE('',*,*,#9649,.F.); +#9649 = EDGE_CURVE('',#9624,#9642,#9650,.T.); +#9650 = LINE('',#9651,#9652); +#9651 = CARTESIAN_POINT('',(-0.25,-18.25,5.6)); +#9652 = VECTOR('',#9653,1.); +#9653 = DIRECTION('',(1.,0.,-0.)); +#9654 = FACE_BOUND('',#9655,.F.); +#9655 = EDGE_LOOP('',(#9656,#9666,#9674,#9682)); +#9656 = ORIENTED_EDGE('',*,*,#9657,.T.); +#9657 = EDGE_CURVE('',#9658,#9660,#9662,.T.); +#9658 = VERTEX_POINT('',#9659); +#9659 = CARTESIAN_POINT('',(-0.25,-16.25,5.6)); +#9660 = VERTEX_POINT('',#9661); +#9661 = CARTESIAN_POINT('',(-0.25,-15.75,5.6)); +#9662 = LINE('',#9663,#9664); +#9663 = CARTESIAN_POINT('',(-0.25,-16.25,5.6)); +#9664 = VECTOR('',#9665,1.); +#9665 = DIRECTION('',(-0.,1.,0.)); +#9666 = ORIENTED_EDGE('',*,*,#9667,.T.); +#9667 = EDGE_CURVE('',#9660,#9668,#9670,.T.); +#9668 = VERTEX_POINT('',#9669); +#9669 = CARTESIAN_POINT('',(0.25,-15.75,5.6)); +#9670 = LINE('',#9671,#9672); +#9671 = CARTESIAN_POINT('',(-0.25,-15.75,5.6)); +#9672 = VECTOR('',#9673,1.); +#9673 = DIRECTION('',(1.,0.,-0.)); +#9674 = ORIENTED_EDGE('',*,*,#9675,.F.); +#9675 = EDGE_CURVE('',#9676,#9668,#9678,.T.); +#9676 = VERTEX_POINT('',#9677); +#9677 = CARTESIAN_POINT('',(0.25,-16.25,5.6)); +#9678 = LINE('',#9679,#9680); +#9679 = CARTESIAN_POINT('',(0.25,-16.25,5.6)); +#9680 = VECTOR('',#9681,1.); +#9681 = DIRECTION('',(-0.,1.,0.)); +#9682 = ORIENTED_EDGE('',*,*,#9683,.F.); +#9683 = EDGE_CURVE('',#9658,#9676,#9684,.T.); +#9684 = LINE('',#9685,#9686); +#9685 = CARTESIAN_POINT('',(-0.25,-16.25,5.6)); +#9686 = VECTOR('',#9687,1.); +#9687 = DIRECTION('',(1.,0.,-0.)); +#9688 = FACE_BOUND('',#9689,.F.); +#9689 = EDGE_LOOP('',(#9690,#9700,#9708,#9716)); +#9690 = ORIENTED_EDGE('',*,*,#9691,.T.); +#9691 = EDGE_CURVE('',#9692,#9694,#9696,.T.); +#9692 = VERTEX_POINT('',#9693); +#9693 = CARTESIAN_POINT('',(-0.25,-14.25,5.6)); +#9694 = VERTEX_POINT('',#9695); +#9695 = CARTESIAN_POINT('',(-0.25,-13.75,5.6)); +#9696 = LINE('',#9697,#9698); +#9697 = CARTESIAN_POINT('',(-0.25,-14.25,5.6)); +#9698 = VECTOR('',#9699,1.); +#9699 = DIRECTION('',(-0.,1.,0.)); +#9700 = ORIENTED_EDGE('',*,*,#9701,.T.); +#9701 = EDGE_CURVE('',#9694,#9702,#9704,.T.); +#9702 = VERTEX_POINT('',#9703); +#9703 = CARTESIAN_POINT('',(0.25,-13.75,5.6)); +#9704 = LINE('',#9705,#9706); +#9705 = CARTESIAN_POINT('',(-0.25,-13.75,5.6)); +#9706 = VECTOR('',#9707,1.); +#9707 = DIRECTION('',(1.,0.,-0.)); +#9708 = ORIENTED_EDGE('',*,*,#9709,.F.); +#9709 = EDGE_CURVE('',#9710,#9702,#9712,.T.); +#9710 = VERTEX_POINT('',#9711); +#9711 = CARTESIAN_POINT('',(0.25,-14.25,5.6)); +#9712 = LINE('',#9713,#9714); +#9713 = CARTESIAN_POINT('',(0.25,-14.25,5.6)); +#9714 = VECTOR('',#9715,1.); +#9715 = DIRECTION('',(-0.,1.,0.)); +#9716 = ORIENTED_EDGE('',*,*,#9717,.F.); +#9717 = EDGE_CURVE('',#9692,#9710,#9718,.T.); +#9718 = LINE('',#9719,#9720); +#9719 = CARTESIAN_POINT('',(-0.25,-14.25,5.6)); +#9720 = VECTOR('',#9721,1.); +#9721 = DIRECTION('',(1.,0.,-0.)); +#9722 = FACE_BOUND('',#9723,.F.); +#9723 = EDGE_LOOP('',(#9724,#9734,#9742,#9750)); +#9724 = ORIENTED_EDGE('',*,*,#9725,.T.); +#9725 = EDGE_CURVE('',#9726,#9728,#9730,.T.); +#9726 = VERTEX_POINT('',#9727); +#9727 = CARTESIAN_POINT('',(-0.25,-12.25,5.6)); +#9728 = VERTEX_POINT('',#9729); +#9729 = CARTESIAN_POINT('',(-0.25,-11.75,5.6)); +#9730 = LINE('',#9731,#9732); +#9731 = CARTESIAN_POINT('',(-0.25,-12.25,5.6)); +#9732 = VECTOR('',#9733,1.); +#9733 = DIRECTION('',(-0.,1.,0.)); +#9734 = ORIENTED_EDGE('',*,*,#9735,.T.); +#9735 = EDGE_CURVE('',#9728,#9736,#9738,.T.); +#9736 = VERTEX_POINT('',#9737); +#9737 = CARTESIAN_POINT('',(0.25,-11.75,5.6)); +#9738 = LINE('',#9739,#9740); +#9739 = CARTESIAN_POINT('',(-0.25,-11.75,5.6)); +#9740 = VECTOR('',#9741,1.); +#9741 = DIRECTION('',(1.,0.,-0.)); +#9742 = ORIENTED_EDGE('',*,*,#9743,.F.); +#9743 = EDGE_CURVE('',#9744,#9736,#9746,.T.); +#9744 = VERTEX_POINT('',#9745); +#9745 = CARTESIAN_POINT('',(0.25,-12.25,5.6)); +#9746 = LINE('',#9747,#9748); +#9747 = CARTESIAN_POINT('',(0.25,-12.25,5.6)); +#9748 = VECTOR('',#9749,1.); +#9749 = DIRECTION('',(-0.,1.,0.)); +#9750 = ORIENTED_EDGE('',*,*,#9751,.F.); +#9751 = EDGE_CURVE('',#9726,#9744,#9752,.T.); +#9752 = LINE('',#9753,#9754); +#9753 = CARTESIAN_POINT('',(-0.25,-12.25,5.6)); +#9754 = VECTOR('',#9755,1.); +#9755 = DIRECTION('',(1.,0.,-0.)); +#9756 = FACE_BOUND('',#9757,.F.); +#9757 = EDGE_LOOP('',(#9758,#9768,#9776,#9784)); +#9758 = ORIENTED_EDGE('',*,*,#9759,.T.); +#9759 = EDGE_CURVE('',#9760,#9762,#9764,.T.); +#9760 = VERTEX_POINT('',#9761); +#9761 = CARTESIAN_POINT('',(-0.25,-10.25,5.6)); +#9762 = VERTEX_POINT('',#9763); +#9763 = CARTESIAN_POINT('',(-0.25,-9.75,5.6)); +#9764 = LINE('',#9765,#9766); +#9765 = CARTESIAN_POINT('',(-0.25,-10.25,5.6)); +#9766 = VECTOR('',#9767,1.); +#9767 = DIRECTION('',(-0.,1.,0.)); +#9768 = ORIENTED_EDGE('',*,*,#9769,.T.); +#9769 = EDGE_CURVE('',#9762,#9770,#9772,.T.); +#9770 = VERTEX_POINT('',#9771); +#9771 = CARTESIAN_POINT('',(0.25,-9.75,5.6)); +#9772 = LINE('',#9773,#9774); +#9773 = CARTESIAN_POINT('',(-0.25,-9.75,5.6)); +#9774 = VECTOR('',#9775,1.); +#9775 = DIRECTION('',(1.,0.,-0.)); +#9776 = ORIENTED_EDGE('',*,*,#9777,.F.); +#9777 = EDGE_CURVE('',#9778,#9770,#9780,.T.); +#9778 = VERTEX_POINT('',#9779); +#9779 = CARTESIAN_POINT('',(0.25,-10.25,5.6)); +#9780 = LINE('',#9781,#9782); +#9781 = CARTESIAN_POINT('',(0.25,-10.25,5.6)); +#9782 = VECTOR('',#9783,1.); +#9783 = DIRECTION('',(-0.,1.,0.)); +#9784 = ORIENTED_EDGE('',*,*,#9785,.F.); +#9785 = EDGE_CURVE('',#9760,#9778,#9786,.T.); +#9786 = LINE('',#9787,#9788); +#9787 = CARTESIAN_POINT('',(-0.25,-10.25,5.6)); +#9788 = VECTOR('',#9789,1.); +#9789 = DIRECTION('',(1.,0.,-0.)); +#9790 = FACE_BOUND('',#9791,.F.); +#9791 = EDGE_LOOP('',(#9792,#9802,#9810,#9818)); +#9792 = ORIENTED_EDGE('',*,*,#9793,.T.); +#9793 = EDGE_CURVE('',#9794,#9796,#9798,.T.); +#9794 = VERTEX_POINT('',#9795); +#9795 = CARTESIAN_POINT('',(-0.25,-8.25,5.6)); +#9796 = VERTEX_POINT('',#9797); +#9797 = CARTESIAN_POINT('',(-0.25,-7.75,5.6)); +#9798 = LINE('',#9799,#9800); +#9799 = CARTESIAN_POINT('',(-0.25,-8.25,5.6)); +#9800 = VECTOR('',#9801,1.); +#9801 = DIRECTION('',(-0.,1.,0.)); +#9802 = ORIENTED_EDGE('',*,*,#9803,.T.); +#9803 = EDGE_CURVE('',#9796,#9804,#9806,.T.); +#9804 = VERTEX_POINT('',#9805); +#9805 = CARTESIAN_POINT('',(0.25,-7.75,5.6)); +#9806 = LINE('',#9807,#9808); +#9807 = CARTESIAN_POINT('',(-0.25,-7.75,5.6)); +#9808 = VECTOR('',#9809,1.); +#9809 = DIRECTION('',(1.,0.,-0.)); +#9810 = ORIENTED_EDGE('',*,*,#9811,.F.); +#9811 = EDGE_CURVE('',#9812,#9804,#9814,.T.); +#9812 = VERTEX_POINT('',#9813); +#9813 = CARTESIAN_POINT('',(0.25,-8.25,5.6)); +#9814 = LINE('',#9815,#9816); +#9815 = CARTESIAN_POINT('',(0.25,-8.25,5.6)); +#9816 = VECTOR('',#9817,1.); +#9817 = DIRECTION('',(-0.,1.,0.)); +#9818 = ORIENTED_EDGE('',*,*,#9819,.F.); +#9819 = EDGE_CURVE('',#9794,#9812,#9820,.T.); +#9820 = LINE('',#9821,#9822); +#9821 = CARTESIAN_POINT('',(-0.25,-8.25,5.6)); +#9822 = VECTOR('',#9823,1.); +#9823 = DIRECTION('',(1.,0.,-0.)); +#9824 = FACE_BOUND('',#9825,.F.); +#9825 = EDGE_LOOP('',(#9826,#9836,#9844,#9852)); +#9826 = ORIENTED_EDGE('',*,*,#9827,.T.); +#9827 = EDGE_CURVE('',#9828,#9830,#9832,.T.); +#9828 = VERTEX_POINT('',#9829); +#9829 = CARTESIAN_POINT('',(-0.25,-6.25,5.6)); +#9830 = VERTEX_POINT('',#9831); +#9831 = CARTESIAN_POINT('',(-0.25,-5.75,5.6)); +#9832 = LINE('',#9833,#9834); +#9833 = CARTESIAN_POINT('',(-0.25,-6.25,5.6)); +#9834 = VECTOR('',#9835,1.); +#9835 = DIRECTION('',(-0.,1.,0.)); +#9836 = ORIENTED_EDGE('',*,*,#9837,.T.); +#9837 = EDGE_CURVE('',#9830,#9838,#9840,.T.); +#9838 = VERTEX_POINT('',#9839); +#9839 = CARTESIAN_POINT('',(0.25,-5.75,5.6)); +#9840 = LINE('',#9841,#9842); +#9841 = CARTESIAN_POINT('',(-0.25,-5.75,5.6)); +#9842 = VECTOR('',#9843,1.); +#9843 = DIRECTION('',(1.,0.,-0.)); +#9844 = ORIENTED_EDGE('',*,*,#9845,.F.); +#9845 = EDGE_CURVE('',#9846,#9838,#9848,.T.); +#9846 = VERTEX_POINT('',#9847); +#9847 = CARTESIAN_POINT('',(0.25,-6.25,5.6)); +#9848 = LINE('',#9849,#9850); +#9849 = CARTESIAN_POINT('',(0.25,-6.25,5.6)); +#9850 = VECTOR('',#9851,1.); +#9851 = DIRECTION('',(-0.,1.,0.)); +#9852 = ORIENTED_EDGE('',*,*,#9853,.F.); +#9853 = EDGE_CURVE('',#9828,#9846,#9854,.T.); +#9854 = LINE('',#9855,#9856); +#9855 = CARTESIAN_POINT('',(-0.25,-6.25,5.6)); +#9856 = VECTOR('',#9857,1.); +#9857 = DIRECTION('',(1.,0.,-0.)); +#9858 = FACE_BOUND('',#9859,.F.); +#9859 = EDGE_LOOP('',(#9860,#9870,#9878,#9886)); +#9860 = ORIENTED_EDGE('',*,*,#9861,.T.); +#9861 = EDGE_CURVE('',#9862,#9864,#9866,.T.); +#9862 = VERTEX_POINT('',#9863); +#9863 = CARTESIAN_POINT('',(-0.25,-4.25,5.6)); +#9864 = VERTEX_POINT('',#9865); +#9865 = CARTESIAN_POINT('',(-0.25,-3.75,5.6)); +#9866 = LINE('',#9867,#9868); +#9867 = CARTESIAN_POINT('',(-0.25,-4.25,5.6)); +#9868 = VECTOR('',#9869,1.); +#9869 = DIRECTION('',(-0.,1.,0.)); +#9870 = ORIENTED_EDGE('',*,*,#9871,.T.); +#9871 = EDGE_CURVE('',#9864,#9872,#9874,.T.); +#9872 = VERTEX_POINT('',#9873); +#9873 = CARTESIAN_POINT('',(0.25,-3.75,5.6)); +#9874 = LINE('',#9875,#9876); +#9875 = CARTESIAN_POINT('',(-0.25,-3.75,5.6)); +#9876 = VECTOR('',#9877,1.); +#9877 = DIRECTION('',(1.,0.,-0.)); +#9878 = ORIENTED_EDGE('',*,*,#9879,.F.); +#9879 = EDGE_CURVE('',#9880,#9872,#9882,.T.); +#9880 = VERTEX_POINT('',#9881); +#9881 = CARTESIAN_POINT('',(0.25,-4.25,5.6)); +#9882 = LINE('',#9883,#9884); +#9883 = CARTESIAN_POINT('',(0.25,-4.25,5.6)); +#9884 = VECTOR('',#9885,1.); +#9885 = DIRECTION('',(-0.,1.,0.)); +#9886 = ORIENTED_EDGE('',*,*,#9887,.F.); +#9887 = EDGE_CURVE('',#9862,#9880,#9888,.T.); +#9888 = LINE('',#9889,#9890); +#9889 = CARTESIAN_POINT('',(-0.25,-4.25,5.6)); +#9890 = VECTOR('',#9891,1.); +#9891 = DIRECTION('',(1.,0.,-0.)); +#9892 = FACE_BOUND('',#9893,.F.); +#9893 = EDGE_LOOP('',(#9894,#9904,#9912,#9920)); +#9894 = ORIENTED_EDGE('',*,*,#9895,.T.); +#9895 = EDGE_CURVE('',#9896,#9898,#9900,.T.); +#9896 = VERTEX_POINT('',#9897); +#9897 = CARTESIAN_POINT('',(-0.25,-2.25,5.6)); +#9898 = VERTEX_POINT('',#9899); +#9899 = CARTESIAN_POINT('',(-0.25,-1.75,5.6)); +#9900 = LINE('',#9901,#9902); +#9901 = CARTESIAN_POINT('',(-0.25,-2.25,5.6)); +#9902 = VECTOR('',#9903,1.); +#9903 = DIRECTION('',(-0.,1.,0.)); +#9904 = ORIENTED_EDGE('',*,*,#9905,.T.); +#9905 = EDGE_CURVE('',#9898,#9906,#9908,.T.); +#9906 = VERTEX_POINT('',#9907); +#9907 = CARTESIAN_POINT('',(0.25,-1.75,5.6)); +#9908 = LINE('',#9909,#9910); +#9909 = CARTESIAN_POINT('',(-0.25,-1.75,5.6)); +#9910 = VECTOR('',#9911,1.); +#9911 = DIRECTION('',(1.,0.,-0.)); +#9912 = ORIENTED_EDGE('',*,*,#9913,.F.); +#9913 = EDGE_CURVE('',#9914,#9906,#9916,.T.); +#9914 = VERTEX_POINT('',#9915); +#9915 = CARTESIAN_POINT('',(0.25,-2.25,5.6)); +#9916 = LINE('',#9917,#9918); +#9917 = CARTESIAN_POINT('',(0.25,-2.25,5.6)); +#9918 = VECTOR('',#9919,1.); +#9919 = DIRECTION('',(-0.,1.,0.)); +#9920 = ORIENTED_EDGE('',*,*,#9921,.F.); +#9921 = EDGE_CURVE('',#9896,#9914,#9922,.T.); +#9922 = LINE('',#9923,#9924); +#9923 = CARTESIAN_POINT('',(-0.25,-2.25,5.6)); +#9924 = VECTOR('',#9925,1.); +#9925 = DIRECTION('',(1.,0.,-0.)); +#9926 = FACE_BOUND('',#9927,.F.); +#9927 = EDGE_LOOP('',(#9928,#9938,#9946,#9954)); +#9928 = ORIENTED_EDGE('',*,*,#9929,.T.); +#9929 = EDGE_CURVE('',#9930,#9932,#9934,.T.); +#9930 = VERTEX_POINT('',#9931); +#9931 = CARTESIAN_POINT('',(-0.25,-0.25,5.6)); +#9932 = VERTEX_POINT('',#9933); +#9933 = CARTESIAN_POINT('',(-0.25,0.25,5.6)); +#9934 = LINE('',#9935,#9936); +#9935 = CARTESIAN_POINT('',(-0.25,-0.25,5.6)); +#9936 = VECTOR('',#9937,1.); +#9937 = DIRECTION('',(-0.,1.,0.)); +#9938 = ORIENTED_EDGE('',*,*,#9939,.T.); +#9939 = EDGE_CURVE('',#9932,#9940,#9942,.T.); +#9940 = VERTEX_POINT('',#9941); +#9941 = CARTESIAN_POINT('',(0.25,0.25,5.6)); +#9942 = LINE('',#9943,#9944); +#9943 = CARTESIAN_POINT('',(-0.25,0.25,5.6)); +#9944 = VECTOR('',#9945,1.); +#9945 = DIRECTION('',(1.,0.,-0.)); +#9946 = ORIENTED_EDGE('',*,*,#9947,.F.); +#9947 = EDGE_CURVE('',#9948,#9940,#9950,.T.); +#9948 = VERTEX_POINT('',#9949); +#9949 = CARTESIAN_POINT('',(0.25,-0.25,5.6)); +#9950 = LINE('',#9951,#9952); +#9951 = CARTESIAN_POINT('',(0.25,-0.25,5.6)); +#9952 = VECTOR('',#9953,1.); +#9953 = DIRECTION('',(-0.,1.,0.)); +#9954 = ORIENTED_EDGE('',*,*,#9955,.F.); +#9955 = EDGE_CURVE('',#9930,#9948,#9956,.T.); +#9956 = LINE('',#9957,#9958); +#9957 = CARTESIAN_POINT('',(-0.25,-0.25,5.6)); +#9958 = VECTOR('',#9959,1.); +#9959 = DIRECTION('',(1.,0.,-0.)); +#9960 = PLANE('',#9961); +#9961 = AXIS2_PLACEMENT_3D('',#9962,#9963,#9964); +#9962 = CARTESIAN_POINT('',(-1.,-19.,5.6)); +#9963 = DIRECTION('',(0.,0.,1.)); +#9964 = DIRECTION('',(1.,0.,-0.)); +#9965 = ADVANCED_FACE('',(#9966),#9972,.T.); +#9966 = FACE_BOUND('',#9967,.T.); +#9967 = EDGE_LOOP('',(#9968,#9969,#9970,#9971)); +#9968 = ORIENTED_EDGE('',*,*,#9239,.F.); +#9969 = ORIENTED_EDGE('',*,*,#9221,.T.); +#9970 = ORIENTED_EDGE('',*,*,#9198,.T.); +#9971 = ORIENTED_EDGE('',*,*,#9166,.F.); +#9972 = PLANE('',#9973); +#9973 = AXIS2_PLACEMENT_3D('',#9974,#9975,#9976); +#9974 = CARTESIAN_POINT('',(9.5,0.6326,9.6386)); +#9975 = DIRECTION('',(0.,0.,1.)); +#9976 = DIRECTION('',(1.,0.,-0.)); +#9977 = ADVANCED_FACE('',(#9978),#10003,.F.); +#9978 = FACE_BOUND('',#9979,.F.); +#9979 = EDGE_LOOP('',(#9980,#9988,#9996,#10002)); +#9980 = ORIENTED_EDGE('',*,*,#9981,.F.); +#9981 = EDGE_CURVE('',#9982,#9272,#9984,.T.); +#9982 = VERTEX_POINT('',#9983); +#9983 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#9984 = LINE('',#9985,#9986); +#9985 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#9986 = VECTOR('',#9987,1.); +#9987 = DIRECTION('',(0.,0.,1.)); +#9988 = ORIENTED_EDGE('',*,*,#9989,.T.); +#9989 = EDGE_CURVE('',#9982,#9990,#9992,.T.); +#9990 = VERTEX_POINT('',#9991); +#9991 = CARTESIAN_POINT('',(21.75,-17.75,1.5106)); +#9992 = LINE('',#9993,#9994); +#9993 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#9994 = VECTOR('',#9995,1.); +#9995 = DIRECTION('',(-0.,1.,0.)); +#9996 = ORIENTED_EDGE('',*,*,#9997,.T.); +#9997 = EDGE_CURVE('',#9990,#9274,#9998,.T.); +#9998 = LINE('',#9999,#10000); +#9999 = CARTESIAN_POINT('',(21.75,-17.75,1.5106)); +#10000 = VECTOR('',#10001,1.); +#10001 = DIRECTION('',(0.,0.,1.)); +#10002 = ORIENTED_EDGE('',*,*,#9271,.F.); +#10003 = PLANE('',#10004); +#10004 = AXIS2_PLACEMENT_3D('',#10005,#10006,#10007); +#10005 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#10006 = DIRECTION('',(1.,0.,-0.)); +#10007 = DIRECTION('',(0.,0.,1.)); +#10008 = ADVANCED_FACE('',(#10009),#10027,.F.); +#10009 = FACE_BOUND('',#10010,.F.); +#10010 = EDGE_LOOP('',(#10011,#10019,#10020,#10021)); +#10011 = ORIENTED_EDGE('',*,*,#10012,.F.); +#10012 = EDGE_CURVE('',#9982,#10013,#10015,.T.); +#10013 = VERTEX_POINT('',#10014); +#10014 = CARTESIAN_POINT('',(22.25,-18.25,1.5106)); +#10015 = LINE('',#10016,#10017); +#10016 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#10017 = VECTOR('',#10018,1.); +#10018 = DIRECTION('',(1.,0.,-0.)); +#10019 = ORIENTED_EDGE('',*,*,#9981,.T.); +#10020 = ORIENTED_EDGE('',*,*,#9297,.T.); +#10021 = ORIENTED_EDGE('',*,*,#10022,.F.); +#10022 = EDGE_CURVE('',#10013,#9290,#10023,.T.); +#10023 = LINE('',#10024,#10025); +#10024 = CARTESIAN_POINT('',(22.25,-18.25,1.5106)); +#10025 = VECTOR('',#10026,1.); +#10026 = DIRECTION('',(0.,0.,1.)); +#10027 = PLANE('',#10028); +#10028 = AXIS2_PLACEMENT_3D('',#10029,#10030,#10031); +#10029 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#10030 = DIRECTION('',(-0.,1.,0.)); +#10031 = DIRECTION('',(0.,0.,1.)); +#10032 = ADVANCED_FACE('',(#10033),#10051,.T.); +#10033 = FACE_BOUND('',#10034,.T.); +#10034 = EDGE_LOOP('',(#10035,#10036,#10044,#10050)); +#10035 = ORIENTED_EDGE('',*,*,#10022,.F.); +#10036 = ORIENTED_EDGE('',*,*,#10037,.T.); +#10037 = EDGE_CURVE('',#10013,#10038,#10040,.T.); +#10038 = VERTEX_POINT('',#10039); +#10039 = CARTESIAN_POINT('',(22.25,-17.75,1.5106)); +#10040 = LINE('',#10041,#10042); +#10041 = CARTESIAN_POINT('',(22.25,-18.25,1.5106)); +#10042 = VECTOR('',#10043,1.); +#10043 = DIRECTION('',(-0.,1.,0.)); +#10044 = ORIENTED_EDGE('',*,*,#10045,.T.); +#10045 = EDGE_CURVE('',#10038,#9282,#10046,.T.); +#10046 = LINE('',#10047,#10048); +#10047 = CARTESIAN_POINT('',(22.25,-17.75,1.5106)); +#10048 = VECTOR('',#10049,1.); +#10049 = DIRECTION('',(0.,0.,1.)); +#10050 = ORIENTED_EDGE('',*,*,#9289,.F.); +#10051 = PLANE('',#10052); +#10052 = AXIS2_PLACEMENT_3D('',#10053,#10054,#10055); +#10053 = CARTESIAN_POINT('',(22.25,-18.25,1.5106)); +#10054 = DIRECTION('',(1.,0.,-0.)); +#10055 = DIRECTION('',(0.,0.,1.)); +#10056 = ADVANCED_FACE('',(#10057),#10068,.T.); +#10057 = FACE_BOUND('',#10058,.T.); +#10058 = EDGE_LOOP('',(#10059,#10065,#10066,#10067)); +#10059 = ORIENTED_EDGE('',*,*,#10060,.F.); +#10060 = EDGE_CURVE('',#9990,#10038,#10061,.T.); +#10061 = LINE('',#10062,#10063); +#10062 = CARTESIAN_POINT('',(21.75,-17.75,1.5106)); +#10063 = VECTOR('',#10064,1.); +#10064 = DIRECTION('',(1.,0.,-0.)); +#10065 = ORIENTED_EDGE('',*,*,#9997,.T.); +#10066 = ORIENTED_EDGE('',*,*,#9281,.T.); +#10067 = ORIENTED_EDGE('',*,*,#10045,.F.); +#10068 = PLANE('',#10069); +#10069 = AXIS2_PLACEMENT_3D('',#10070,#10071,#10072); +#10070 = CARTESIAN_POINT('',(21.75,-17.75,1.5106)); +#10071 = DIRECTION('',(-0.,1.,0.)); +#10072 = DIRECTION('',(0.,0.,1.)); +#10073 = ADVANCED_FACE('',(#10074),#10099,.F.); +#10074 = FACE_BOUND('',#10075,.F.); +#10075 = EDGE_LOOP('',(#10076,#10084,#10092,#10098)); +#10076 = ORIENTED_EDGE('',*,*,#10077,.F.); +#10077 = EDGE_CURVE('',#10078,#9306,#10080,.T.); +#10078 = VERTEX_POINT('',#10079); +#10079 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10080 = LINE('',#10081,#10082); +#10081 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10082 = VECTOR('',#10083,1.); +#10083 = DIRECTION('',(0.,0.,1.)); +#10084 = ORIENTED_EDGE('',*,*,#10085,.T.); +#10085 = EDGE_CURVE('',#10078,#10086,#10088,.T.); +#10086 = VERTEX_POINT('',#10087); +#10087 = CARTESIAN_POINT('',(21.75,-15.75,1.5106)); +#10088 = LINE('',#10089,#10090); +#10089 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10090 = VECTOR('',#10091,1.); +#10091 = DIRECTION('',(-0.,1.,0.)); +#10092 = ORIENTED_EDGE('',*,*,#10093,.T.); +#10093 = EDGE_CURVE('',#10086,#9308,#10094,.T.); +#10094 = LINE('',#10095,#10096); +#10095 = CARTESIAN_POINT('',(21.75,-15.75,1.5106)); +#10096 = VECTOR('',#10097,1.); +#10097 = DIRECTION('',(0.,0.,1.)); +#10098 = ORIENTED_EDGE('',*,*,#9305,.F.); +#10099 = PLANE('',#10100); +#10100 = AXIS2_PLACEMENT_3D('',#10101,#10102,#10103); +#10101 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10102 = DIRECTION('',(1.,0.,-0.)); +#10103 = DIRECTION('',(0.,0.,1.)); +#10104 = ADVANCED_FACE('',(#10105),#10123,.T.); +#10105 = FACE_BOUND('',#10106,.T.); +#10106 = EDGE_LOOP('',(#10107,#10115,#10116,#10117)); +#10107 = ORIENTED_EDGE('',*,*,#10108,.F.); +#10108 = EDGE_CURVE('',#10086,#10109,#10111,.T.); +#10109 = VERTEX_POINT('',#10110); +#10110 = CARTESIAN_POINT('',(22.25,-15.75,1.5106)); +#10111 = LINE('',#10112,#10113); +#10112 = CARTESIAN_POINT('',(21.75,-15.75,1.5106)); +#10113 = VECTOR('',#10114,1.); +#10114 = DIRECTION('',(1.,0.,-0.)); +#10115 = ORIENTED_EDGE('',*,*,#10093,.T.); +#10116 = ORIENTED_EDGE('',*,*,#9315,.T.); +#10117 = ORIENTED_EDGE('',*,*,#10118,.F.); +#10118 = EDGE_CURVE('',#10109,#9316,#10119,.T.); +#10119 = LINE('',#10120,#10121); +#10120 = CARTESIAN_POINT('',(22.25,-15.75,1.5106)); +#10121 = VECTOR('',#10122,1.); +#10122 = DIRECTION('',(0.,0.,1.)); +#10123 = PLANE('',#10124); +#10124 = AXIS2_PLACEMENT_3D('',#10125,#10126,#10127); +#10125 = CARTESIAN_POINT('',(21.75,-15.75,1.5106)); +#10126 = DIRECTION('',(-0.,1.,0.)); +#10127 = DIRECTION('',(0.,0.,1.)); +#10128 = ADVANCED_FACE('',(#10129),#10147,.F.); +#10129 = FACE_BOUND('',#10130,.F.); +#10130 = EDGE_LOOP('',(#10131,#10139,#10140,#10141)); +#10131 = ORIENTED_EDGE('',*,*,#10132,.F.); +#10132 = EDGE_CURVE('',#10078,#10133,#10135,.T.); +#10133 = VERTEX_POINT('',#10134); +#10134 = CARTESIAN_POINT('',(22.25,-16.25,1.5106)); +#10135 = LINE('',#10136,#10137); +#10136 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10137 = VECTOR('',#10138,1.); +#10138 = DIRECTION('',(1.,0.,-0.)); +#10139 = ORIENTED_EDGE('',*,*,#10077,.T.); +#10140 = ORIENTED_EDGE('',*,*,#9331,.T.); +#10141 = ORIENTED_EDGE('',*,*,#10142,.F.); +#10142 = EDGE_CURVE('',#10133,#9324,#10143,.T.); +#10143 = LINE('',#10144,#10145); +#10144 = CARTESIAN_POINT('',(22.25,-16.25,1.5106)); +#10145 = VECTOR('',#10146,1.); +#10146 = DIRECTION('',(0.,0.,1.)); +#10147 = PLANE('',#10148); +#10148 = AXIS2_PLACEMENT_3D('',#10149,#10150,#10151); +#10149 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#10150 = DIRECTION('',(-0.,1.,0.)); +#10151 = DIRECTION('',(0.,0.,1.)); +#10152 = ADVANCED_FACE('',(#10153),#10164,.T.); +#10153 = FACE_BOUND('',#10154,.T.); +#10154 = EDGE_LOOP('',(#10155,#10156,#10162,#10163)); +#10155 = ORIENTED_EDGE('',*,*,#10142,.F.); +#10156 = ORIENTED_EDGE('',*,*,#10157,.T.); +#10157 = EDGE_CURVE('',#10133,#10109,#10158,.T.); +#10158 = LINE('',#10159,#10160); +#10159 = CARTESIAN_POINT('',(22.25,-16.25,1.5106)); +#10160 = VECTOR('',#10161,1.); +#10161 = DIRECTION('',(-0.,1.,0.)); +#10162 = ORIENTED_EDGE('',*,*,#10118,.T.); +#10163 = ORIENTED_EDGE('',*,*,#9323,.F.); +#10164 = PLANE('',#10165); +#10165 = AXIS2_PLACEMENT_3D('',#10166,#10167,#10168); +#10166 = CARTESIAN_POINT('',(22.25,-16.25,1.5106)); +#10167 = DIRECTION('',(1.,0.,-0.)); +#10168 = DIRECTION('',(0.,0.,1.)); +#10169 = ADVANCED_FACE('',(#10170),#10195,.F.); +#10170 = FACE_BOUND('',#10171,.F.); +#10171 = EDGE_LOOP('',(#10172,#10180,#10188,#10194)); +#10172 = ORIENTED_EDGE('',*,*,#10173,.F.); +#10173 = EDGE_CURVE('',#10174,#9340,#10176,.T.); +#10174 = VERTEX_POINT('',#10175); +#10175 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10176 = LINE('',#10177,#10178); +#10177 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10178 = VECTOR('',#10179,1.); +#10179 = DIRECTION('',(0.,0.,1.)); +#10180 = ORIENTED_EDGE('',*,*,#10181,.T.); +#10181 = EDGE_CURVE('',#10174,#10182,#10184,.T.); +#10182 = VERTEX_POINT('',#10183); +#10183 = CARTESIAN_POINT('',(21.75,-13.75,1.5106)); +#10184 = LINE('',#10185,#10186); +#10185 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10186 = VECTOR('',#10187,1.); +#10187 = DIRECTION('',(-0.,1.,0.)); +#10188 = ORIENTED_EDGE('',*,*,#10189,.T.); +#10189 = EDGE_CURVE('',#10182,#9342,#10190,.T.); +#10190 = LINE('',#10191,#10192); +#10191 = CARTESIAN_POINT('',(21.75,-13.75,1.5106)); +#10192 = VECTOR('',#10193,1.); +#10193 = DIRECTION('',(0.,0.,1.)); +#10194 = ORIENTED_EDGE('',*,*,#9339,.F.); +#10195 = PLANE('',#10196); +#10196 = AXIS2_PLACEMENT_3D('',#10197,#10198,#10199); +#10197 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10198 = DIRECTION('',(1.,0.,-0.)); +#10199 = DIRECTION('',(0.,0.,1.)); +#10200 = ADVANCED_FACE('',(#10201),#10219,.T.); +#10201 = FACE_BOUND('',#10202,.T.); +#10202 = EDGE_LOOP('',(#10203,#10211,#10212,#10213)); +#10203 = ORIENTED_EDGE('',*,*,#10204,.F.); +#10204 = EDGE_CURVE('',#10182,#10205,#10207,.T.); +#10205 = VERTEX_POINT('',#10206); +#10206 = CARTESIAN_POINT('',(22.25,-13.75,1.5106)); +#10207 = LINE('',#10208,#10209); +#10208 = CARTESIAN_POINT('',(21.75,-13.75,1.5106)); +#10209 = VECTOR('',#10210,1.); +#10210 = DIRECTION('',(1.,0.,-0.)); +#10211 = ORIENTED_EDGE('',*,*,#10189,.T.); +#10212 = ORIENTED_EDGE('',*,*,#9349,.T.); +#10213 = ORIENTED_EDGE('',*,*,#10214,.F.); +#10214 = EDGE_CURVE('',#10205,#9350,#10215,.T.); +#10215 = LINE('',#10216,#10217); +#10216 = CARTESIAN_POINT('',(22.25,-13.75,1.5106)); +#10217 = VECTOR('',#10218,1.); +#10218 = DIRECTION('',(0.,0.,1.)); +#10219 = PLANE('',#10220); +#10220 = AXIS2_PLACEMENT_3D('',#10221,#10222,#10223); +#10221 = CARTESIAN_POINT('',(21.75,-13.75,1.5106)); +#10222 = DIRECTION('',(-0.,1.,0.)); +#10223 = DIRECTION('',(0.,0.,1.)); +#10224 = ADVANCED_FACE('',(#10225),#10243,.F.); +#10225 = FACE_BOUND('',#10226,.F.); +#10226 = EDGE_LOOP('',(#10227,#10235,#10236,#10237)); +#10227 = ORIENTED_EDGE('',*,*,#10228,.F.); +#10228 = EDGE_CURVE('',#10174,#10229,#10231,.T.); +#10229 = VERTEX_POINT('',#10230); +#10230 = CARTESIAN_POINT('',(22.25,-14.25,1.5106)); +#10231 = LINE('',#10232,#10233); +#10232 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10233 = VECTOR('',#10234,1.); +#10234 = DIRECTION('',(1.,0.,-0.)); +#10235 = ORIENTED_EDGE('',*,*,#10173,.T.); +#10236 = ORIENTED_EDGE('',*,*,#9365,.T.); +#10237 = ORIENTED_EDGE('',*,*,#10238,.F.); +#10238 = EDGE_CURVE('',#10229,#9358,#10239,.T.); +#10239 = LINE('',#10240,#10241); +#10240 = CARTESIAN_POINT('',(22.25,-14.25,1.5106)); +#10241 = VECTOR('',#10242,1.); +#10242 = DIRECTION('',(0.,0.,1.)); +#10243 = PLANE('',#10244); +#10244 = AXIS2_PLACEMENT_3D('',#10245,#10246,#10247); +#10245 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#10246 = DIRECTION('',(-0.,1.,0.)); +#10247 = DIRECTION('',(0.,0.,1.)); +#10248 = ADVANCED_FACE('',(#10249),#10260,.T.); +#10249 = FACE_BOUND('',#10250,.T.); +#10250 = EDGE_LOOP('',(#10251,#10252,#10258,#10259)); +#10251 = ORIENTED_EDGE('',*,*,#10238,.F.); +#10252 = ORIENTED_EDGE('',*,*,#10253,.T.); +#10253 = EDGE_CURVE('',#10229,#10205,#10254,.T.); +#10254 = LINE('',#10255,#10256); +#10255 = CARTESIAN_POINT('',(22.25,-14.25,1.5106)); +#10256 = VECTOR('',#10257,1.); +#10257 = DIRECTION('',(-0.,1.,0.)); +#10258 = ORIENTED_EDGE('',*,*,#10214,.T.); +#10259 = ORIENTED_EDGE('',*,*,#9357,.F.); +#10260 = PLANE('',#10261); +#10261 = AXIS2_PLACEMENT_3D('',#10262,#10263,#10264); +#10262 = CARTESIAN_POINT('',(22.25,-14.25,1.5106)); +#10263 = DIRECTION('',(1.,0.,-0.)); +#10264 = DIRECTION('',(0.,0.,1.)); +#10265 = ADVANCED_FACE('',(#10266),#10291,.F.); +#10266 = FACE_BOUND('',#10267,.F.); +#10267 = EDGE_LOOP('',(#10268,#10276,#10284,#10290)); +#10268 = ORIENTED_EDGE('',*,*,#10269,.F.); +#10269 = EDGE_CURVE('',#10270,#9374,#10272,.T.); +#10270 = VERTEX_POINT('',#10271); +#10271 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10272 = LINE('',#10273,#10274); +#10273 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10274 = VECTOR('',#10275,1.); +#10275 = DIRECTION('',(0.,0.,1.)); +#10276 = ORIENTED_EDGE('',*,*,#10277,.T.); +#10277 = EDGE_CURVE('',#10270,#10278,#10280,.T.); +#10278 = VERTEX_POINT('',#10279); +#10279 = CARTESIAN_POINT('',(21.75,-11.75,1.5106)); +#10280 = LINE('',#10281,#10282); +#10281 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10282 = VECTOR('',#10283,1.); +#10283 = DIRECTION('',(-0.,1.,0.)); +#10284 = ORIENTED_EDGE('',*,*,#10285,.T.); +#10285 = EDGE_CURVE('',#10278,#9376,#10286,.T.); +#10286 = LINE('',#10287,#10288); +#10287 = CARTESIAN_POINT('',(21.75,-11.75,1.5106)); +#10288 = VECTOR('',#10289,1.); +#10289 = DIRECTION('',(0.,0.,1.)); +#10290 = ORIENTED_EDGE('',*,*,#9373,.F.); +#10291 = PLANE('',#10292); +#10292 = AXIS2_PLACEMENT_3D('',#10293,#10294,#10295); +#10293 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10294 = DIRECTION('',(1.,0.,-0.)); +#10295 = DIRECTION('',(0.,0.,1.)); +#10296 = ADVANCED_FACE('',(#10297),#10315,.T.); +#10297 = FACE_BOUND('',#10298,.T.); +#10298 = EDGE_LOOP('',(#10299,#10307,#10308,#10309)); +#10299 = ORIENTED_EDGE('',*,*,#10300,.F.); +#10300 = EDGE_CURVE('',#10278,#10301,#10303,.T.); +#10301 = VERTEX_POINT('',#10302); +#10302 = CARTESIAN_POINT('',(22.25,-11.75,1.5106)); +#10303 = LINE('',#10304,#10305); +#10304 = CARTESIAN_POINT('',(21.75,-11.75,1.5106)); +#10305 = VECTOR('',#10306,1.); +#10306 = DIRECTION('',(1.,0.,-0.)); +#10307 = ORIENTED_EDGE('',*,*,#10285,.T.); +#10308 = ORIENTED_EDGE('',*,*,#9383,.T.); +#10309 = ORIENTED_EDGE('',*,*,#10310,.F.); +#10310 = EDGE_CURVE('',#10301,#9384,#10311,.T.); +#10311 = LINE('',#10312,#10313); +#10312 = CARTESIAN_POINT('',(22.25,-11.75,1.5106)); +#10313 = VECTOR('',#10314,1.); +#10314 = DIRECTION('',(0.,0.,1.)); +#10315 = PLANE('',#10316); +#10316 = AXIS2_PLACEMENT_3D('',#10317,#10318,#10319); +#10317 = CARTESIAN_POINT('',(21.75,-11.75,1.5106)); +#10318 = DIRECTION('',(-0.,1.,0.)); +#10319 = DIRECTION('',(0.,0.,1.)); +#10320 = ADVANCED_FACE('',(#10321),#10339,.F.); +#10321 = FACE_BOUND('',#10322,.F.); +#10322 = EDGE_LOOP('',(#10323,#10331,#10332,#10333)); +#10323 = ORIENTED_EDGE('',*,*,#10324,.F.); +#10324 = EDGE_CURVE('',#10270,#10325,#10327,.T.); +#10325 = VERTEX_POINT('',#10326); +#10326 = CARTESIAN_POINT('',(22.25,-12.25,1.5106)); +#10327 = LINE('',#10328,#10329); +#10328 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10329 = VECTOR('',#10330,1.); +#10330 = DIRECTION('',(1.,0.,-0.)); +#10331 = ORIENTED_EDGE('',*,*,#10269,.T.); +#10332 = ORIENTED_EDGE('',*,*,#9399,.T.); +#10333 = ORIENTED_EDGE('',*,*,#10334,.F.); +#10334 = EDGE_CURVE('',#10325,#9392,#10335,.T.); +#10335 = LINE('',#10336,#10337); +#10336 = CARTESIAN_POINT('',(22.25,-12.25,1.5106)); +#10337 = VECTOR('',#10338,1.); +#10338 = DIRECTION('',(0.,0.,1.)); +#10339 = PLANE('',#10340); +#10340 = AXIS2_PLACEMENT_3D('',#10341,#10342,#10343); +#10341 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#10342 = DIRECTION('',(-0.,1.,0.)); +#10343 = DIRECTION('',(0.,0.,1.)); +#10344 = ADVANCED_FACE('',(#10345),#10356,.T.); +#10345 = FACE_BOUND('',#10346,.T.); +#10346 = EDGE_LOOP('',(#10347,#10348,#10354,#10355)); +#10347 = ORIENTED_EDGE('',*,*,#10334,.F.); +#10348 = ORIENTED_EDGE('',*,*,#10349,.T.); +#10349 = EDGE_CURVE('',#10325,#10301,#10350,.T.); +#10350 = LINE('',#10351,#10352); +#10351 = CARTESIAN_POINT('',(22.25,-12.25,1.5106)); +#10352 = VECTOR('',#10353,1.); +#10353 = DIRECTION('',(-0.,1.,0.)); +#10354 = ORIENTED_EDGE('',*,*,#10310,.T.); +#10355 = ORIENTED_EDGE('',*,*,#9391,.F.); +#10356 = PLANE('',#10357); +#10357 = AXIS2_PLACEMENT_3D('',#10358,#10359,#10360); +#10358 = CARTESIAN_POINT('',(22.25,-12.25,1.5106)); +#10359 = DIRECTION('',(1.,0.,-0.)); +#10360 = DIRECTION('',(0.,0.,1.)); +#10361 = ADVANCED_FACE('',(#10362),#10387,.F.); +#10362 = FACE_BOUND('',#10363,.F.); +#10363 = EDGE_LOOP('',(#10364,#10372,#10380,#10386)); +#10364 = ORIENTED_EDGE('',*,*,#10365,.F.); +#10365 = EDGE_CURVE('',#10366,#9408,#10368,.T.); +#10366 = VERTEX_POINT('',#10367); +#10367 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10368 = LINE('',#10369,#10370); +#10369 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10370 = VECTOR('',#10371,1.); +#10371 = DIRECTION('',(0.,0.,1.)); +#10372 = ORIENTED_EDGE('',*,*,#10373,.T.); +#10373 = EDGE_CURVE('',#10366,#10374,#10376,.T.); +#10374 = VERTEX_POINT('',#10375); +#10375 = CARTESIAN_POINT('',(21.75,-9.75,1.5106)); +#10376 = LINE('',#10377,#10378); +#10377 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10378 = VECTOR('',#10379,1.); +#10379 = DIRECTION('',(-0.,1.,0.)); +#10380 = ORIENTED_EDGE('',*,*,#10381,.T.); +#10381 = EDGE_CURVE('',#10374,#9410,#10382,.T.); +#10382 = LINE('',#10383,#10384); +#10383 = CARTESIAN_POINT('',(21.75,-9.75,1.5106)); +#10384 = VECTOR('',#10385,1.); +#10385 = DIRECTION('',(0.,0.,1.)); +#10386 = ORIENTED_EDGE('',*,*,#9407,.F.); +#10387 = PLANE('',#10388); +#10388 = AXIS2_PLACEMENT_3D('',#10389,#10390,#10391); +#10389 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10390 = DIRECTION('',(1.,0.,-0.)); +#10391 = DIRECTION('',(0.,0.,1.)); +#10392 = ADVANCED_FACE('',(#10393),#10411,.T.); +#10393 = FACE_BOUND('',#10394,.T.); +#10394 = EDGE_LOOP('',(#10395,#10403,#10404,#10405)); +#10395 = ORIENTED_EDGE('',*,*,#10396,.F.); +#10396 = EDGE_CURVE('',#10374,#10397,#10399,.T.); +#10397 = VERTEX_POINT('',#10398); +#10398 = CARTESIAN_POINT('',(22.25,-9.75,1.5106)); +#10399 = LINE('',#10400,#10401); +#10400 = CARTESIAN_POINT('',(21.75,-9.75,1.5106)); +#10401 = VECTOR('',#10402,1.); +#10402 = DIRECTION('',(1.,0.,-0.)); +#10403 = ORIENTED_EDGE('',*,*,#10381,.T.); +#10404 = ORIENTED_EDGE('',*,*,#9417,.T.); +#10405 = ORIENTED_EDGE('',*,*,#10406,.F.); +#10406 = EDGE_CURVE('',#10397,#9418,#10407,.T.); +#10407 = LINE('',#10408,#10409); +#10408 = CARTESIAN_POINT('',(22.25,-9.75,1.5106)); +#10409 = VECTOR('',#10410,1.); +#10410 = DIRECTION('',(0.,0.,1.)); +#10411 = PLANE('',#10412); +#10412 = AXIS2_PLACEMENT_3D('',#10413,#10414,#10415); +#10413 = CARTESIAN_POINT('',(21.75,-9.75,1.5106)); +#10414 = DIRECTION('',(-0.,1.,0.)); +#10415 = DIRECTION('',(0.,0.,1.)); +#10416 = ADVANCED_FACE('',(#10417),#10435,.F.); +#10417 = FACE_BOUND('',#10418,.F.); +#10418 = EDGE_LOOP('',(#10419,#10427,#10428,#10429)); +#10419 = ORIENTED_EDGE('',*,*,#10420,.F.); +#10420 = EDGE_CURVE('',#10366,#10421,#10423,.T.); +#10421 = VERTEX_POINT('',#10422); +#10422 = CARTESIAN_POINT('',(22.25,-10.25,1.5106)); +#10423 = LINE('',#10424,#10425); +#10424 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10425 = VECTOR('',#10426,1.); +#10426 = DIRECTION('',(1.,0.,-0.)); +#10427 = ORIENTED_EDGE('',*,*,#10365,.T.); +#10428 = ORIENTED_EDGE('',*,*,#9433,.T.); +#10429 = ORIENTED_EDGE('',*,*,#10430,.F.); +#10430 = EDGE_CURVE('',#10421,#9426,#10431,.T.); +#10431 = LINE('',#10432,#10433); +#10432 = CARTESIAN_POINT('',(22.25,-10.25,1.5106)); +#10433 = VECTOR('',#10434,1.); +#10434 = DIRECTION('',(0.,0.,1.)); +#10435 = PLANE('',#10436); +#10436 = AXIS2_PLACEMENT_3D('',#10437,#10438,#10439); +#10437 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#10438 = DIRECTION('',(-0.,1.,0.)); +#10439 = DIRECTION('',(0.,0.,1.)); +#10440 = ADVANCED_FACE('',(#10441),#10452,.T.); +#10441 = FACE_BOUND('',#10442,.T.); +#10442 = EDGE_LOOP('',(#10443,#10444,#10450,#10451)); +#10443 = ORIENTED_EDGE('',*,*,#10430,.F.); +#10444 = ORIENTED_EDGE('',*,*,#10445,.T.); +#10445 = EDGE_CURVE('',#10421,#10397,#10446,.T.); +#10446 = LINE('',#10447,#10448); +#10447 = CARTESIAN_POINT('',(22.25,-10.25,1.5106)); +#10448 = VECTOR('',#10449,1.); +#10449 = DIRECTION('',(-0.,1.,0.)); +#10450 = ORIENTED_EDGE('',*,*,#10406,.T.); +#10451 = ORIENTED_EDGE('',*,*,#9425,.F.); +#10452 = PLANE('',#10453); +#10453 = AXIS2_PLACEMENT_3D('',#10454,#10455,#10456); +#10454 = CARTESIAN_POINT('',(22.25,-10.25,1.5106)); +#10455 = DIRECTION('',(1.,0.,-0.)); +#10456 = DIRECTION('',(0.,0.,1.)); +#10457 = ADVANCED_FACE('',(#10458),#10483,.F.); +#10458 = FACE_BOUND('',#10459,.F.); +#10459 = EDGE_LOOP('',(#10460,#10468,#10476,#10482)); +#10460 = ORIENTED_EDGE('',*,*,#10461,.F.); +#10461 = EDGE_CURVE('',#10462,#9442,#10464,.T.); +#10462 = VERTEX_POINT('',#10463); +#10463 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10464 = LINE('',#10465,#10466); +#10465 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10466 = VECTOR('',#10467,1.); +#10467 = DIRECTION('',(0.,0.,1.)); +#10468 = ORIENTED_EDGE('',*,*,#10469,.T.); +#10469 = EDGE_CURVE('',#10462,#10470,#10472,.T.); +#10470 = VERTEX_POINT('',#10471); +#10471 = CARTESIAN_POINT('',(21.75,-7.75,1.5106)); +#10472 = LINE('',#10473,#10474); +#10473 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10474 = VECTOR('',#10475,1.); +#10475 = DIRECTION('',(-0.,1.,0.)); +#10476 = ORIENTED_EDGE('',*,*,#10477,.T.); +#10477 = EDGE_CURVE('',#10470,#9444,#10478,.T.); +#10478 = LINE('',#10479,#10480); +#10479 = CARTESIAN_POINT('',(21.75,-7.75,1.5106)); +#10480 = VECTOR('',#10481,1.); +#10481 = DIRECTION('',(0.,0.,1.)); +#10482 = ORIENTED_EDGE('',*,*,#9441,.F.); +#10483 = PLANE('',#10484); +#10484 = AXIS2_PLACEMENT_3D('',#10485,#10486,#10487); +#10485 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10486 = DIRECTION('',(1.,0.,-0.)); +#10487 = DIRECTION('',(0.,0.,1.)); +#10488 = ADVANCED_FACE('',(#10489),#10507,.T.); +#10489 = FACE_BOUND('',#10490,.T.); +#10490 = EDGE_LOOP('',(#10491,#10499,#10500,#10501)); +#10491 = ORIENTED_EDGE('',*,*,#10492,.F.); +#10492 = EDGE_CURVE('',#10470,#10493,#10495,.T.); +#10493 = VERTEX_POINT('',#10494); +#10494 = CARTESIAN_POINT('',(22.25,-7.75,1.5106)); +#10495 = LINE('',#10496,#10497); +#10496 = CARTESIAN_POINT('',(21.75,-7.75,1.5106)); +#10497 = VECTOR('',#10498,1.); +#10498 = DIRECTION('',(1.,0.,-0.)); +#10499 = ORIENTED_EDGE('',*,*,#10477,.T.); +#10500 = ORIENTED_EDGE('',*,*,#9451,.T.); +#10501 = ORIENTED_EDGE('',*,*,#10502,.F.); +#10502 = EDGE_CURVE('',#10493,#9452,#10503,.T.); +#10503 = LINE('',#10504,#10505); +#10504 = CARTESIAN_POINT('',(22.25,-7.75,1.5106)); +#10505 = VECTOR('',#10506,1.); +#10506 = DIRECTION('',(0.,0.,1.)); +#10507 = PLANE('',#10508); +#10508 = AXIS2_PLACEMENT_3D('',#10509,#10510,#10511); +#10509 = CARTESIAN_POINT('',(21.75,-7.75,1.5106)); +#10510 = DIRECTION('',(-0.,1.,0.)); +#10511 = DIRECTION('',(0.,0.,1.)); +#10512 = ADVANCED_FACE('',(#10513),#10531,.F.); +#10513 = FACE_BOUND('',#10514,.F.); +#10514 = EDGE_LOOP('',(#10515,#10523,#10524,#10525)); +#10515 = ORIENTED_EDGE('',*,*,#10516,.F.); +#10516 = EDGE_CURVE('',#10462,#10517,#10519,.T.); +#10517 = VERTEX_POINT('',#10518); +#10518 = CARTESIAN_POINT('',(22.25,-8.25,1.5106)); +#10519 = LINE('',#10520,#10521); +#10520 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10521 = VECTOR('',#10522,1.); +#10522 = DIRECTION('',(1.,0.,-0.)); +#10523 = ORIENTED_EDGE('',*,*,#10461,.T.); +#10524 = ORIENTED_EDGE('',*,*,#9467,.T.); +#10525 = ORIENTED_EDGE('',*,*,#10526,.F.); +#10526 = EDGE_CURVE('',#10517,#9460,#10527,.T.); +#10527 = LINE('',#10528,#10529); +#10528 = CARTESIAN_POINT('',(22.25,-8.25,1.5106)); +#10529 = VECTOR('',#10530,1.); +#10530 = DIRECTION('',(0.,0.,1.)); +#10531 = PLANE('',#10532); +#10532 = AXIS2_PLACEMENT_3D('',#10533,#10534,#10535); +#10533 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#10534 = DIRECTION('',(-0.,1.,0.)); +#10535 = DIRECTION('',(0.,0.,1.)); +#10536 = ADVANCED_FACE('',(#10537),#10548,.T.); +#10537 = FACE_BOUND('',#10538,.T.); +#10538 = EDGE_LOOP('',(#10539,#10540,#10546,#10547)); +#10539 = ORIENTED_EDGE('',*,*,#10526,.F.); +#10540 = ORIENTED_EDGE('',*,*,#10541,.T.); +#10541 = EDGE_CURVE('',#10517,#10493,#10542,.T.); +#10542 = LINE('',#10543,#10544); +#10543 = CARTESIAN_POINT('',(22.25,-8.25,1.5106)); +#10544 = VECTOR('',#10545,1.); +#10545 = DIRECTION('',(-0.,1.,0.)); +#10546 = ORIENTED_EDGE('',*,*,#10502,.T.); +#10547 = ORIENTED_EDGE('',*,*,#9459,.F.); +#10548 = PLANE('',#10549); +#10549 = AXIS2_PLACEMENT_3D('',#10550,#10551,#10552); +#10550 = CARTESIAN_POINT('',(22.25,-8.25,1.5106)); +#10551 = DIRECTION('',(1.,0.,-0.)); +#10552 = DIRECTION('',(0.,0.,1.)); +#10553 = ADVANCED_FACE('',(#10554),#10579,.F.); +#10554 = FACE_BOUND('',#10555,.F.); +#10555 = EDGE_LOOP('',(#10556,#10564,#10572,#10578)); +#10556 = ORIENTED_EDGE('',*,*,#10557,.F.); +#10557 = EDGE_CURVE('',#10558,#9476,#10560,.T.); +#10558 = VERTEX_POINT('',#10559); +#10559 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10560 = LINE('',#10561,#10562); +#10561 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10562 = VECTOR('',#10563,1.); +#10563 = DIRECTION('',(0.,0.,1.)); +#10564 = ORIENTED_EDGE('',*,*,#10565,.T.); +#10565 = EDGE_CURVE('',#10558,#10566,#10568,.T.); +#10566 = VERTEX_POINT('',#10567); +#10567 = CARTESIAN_POINT('',(21.75,-5.75,1.5106)); +#10568 = LINE('',#10569,#10570); +#10569 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10570 = VECTOR('',#10571,1.); +#10571 = DIRECTION('',(-0.,1.,0.)); +#10572 = ORIENTED_EDGE('',*,*,#10573,.T.); +#10573 = EDGE_CURVE('',#10566,#9478,#10574,.T.); +#10574 = LINE('',#10575,#10576); +#10575 = CARTESIAN_POINT('',(21.75,-5.75,1.5106)); +#10576 = VECTOR('',#10577,1.); +#10577 = DIRECTION('',(0.,0.,1.)); +#10578 = ORIENTED_EDGE('',*,*,#9475,.F.); +#10579 = PLANE('',#10580); +#10580 = AXIS2_PLACEMENT_3D('',#10581,#10582,#10583); +#10581 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10582 = DIRECTION('',(1.,0.,-0.)); +#10583 = DIRECTION('',(0.,0.,1.)); +#10584 = ADVANCED_FACE('',(#10585),#10603,.T.); +#10585 = FACE_BOUND('',#10586,.T.); +#10586 = EDGE_LOOP('',(#10587,#10595,#10596,#10597)); +#10587 = ORIENTED_EDGE('',*,*,#10588,.F.); +#10588 = EDGE_CURVE('',#10566,#10589,#10591,.T.); +#10589 = VERTEX_POINT('',#10590); +#10590 = CARTESIAN_POINT('',(22.25,-5.75,1.5106)); +#10591 = LINE('',#10592,#10593); +#10592 = CARTESIAN_POINT('',(21.75,-5.75,1.5106)); +#10593 = VECTOR('',#10594,1.); +#10594 = DIRECTION('',(1.,0.,-0.)); +#10595 = ORIENTED_EDGE('',*,*,#10573,.T.); +#10596 = ORIENTED_EDGE('',*,*,#9485,.T.); +#10597 = ORIENTED_EDGE('',*,*,#10598,.F.); +#10598 = EDGE_CURVE('',#10589,#9486,#10599,.T.); +#10599 = LINE('',#10600,#10601); +#10600 = CARTESIAN_POINT('',(22.25,-5.75,1.5106)); +#10601 = VECTOR('',#10602,1.); +#10602 = DIRECTION('',(0.,0.,1.)); +#10603 = PLANE('',#10604); +#10604 = AXIS2_PLACEMENT_3D('',#10605,#10606,#10607); +#10605 = CARTESIAN_POINT('',(21.75,-5.75,1.5106)); +#10606 = DIRECTION('',(-0.,1.,0.)); +#10607 = DIRECTION('',(0.,0.,1.)); +#10608 = ADVANCED_FACE('',(#10609),#10627,.F.); +#10609 = FACE_BOUND('',#10610,.F.); +#10610 = EDGE_LOOP('',(#10611,#10619,#10620,#10621)); +#10611 = ORIENTED_EDGE('',*,*,#10612,.F.); +#10612 = EDGE_CURVE('',#10558,#10613,#10615,.T.); +#10613 = VERTEX_POINT('',#10614); +#10614 = CARTESIAN_POINT('',(22.25,-6.25,1.5106)); +#10615 = LINE('',#10616,#10617); +#10616 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10617 = VECTOR('',#10618,1.); +#10618 = DIRECTION('',(1.,0.,-0.)); +#10619 = ORIENTED_EDGE('',*,*,#10557,.T.); +#10620 = ORIENTED_EDGE('',*,*,#9501,.T.); +#10621 = ORIENTED_EDGE('',*,*,#10622,.F.); +#10622 = EDGE_CURVE('',#10613,#9494,#10623,.T.); +#10623 = LINE('',#10624,#10625); +#10624 = CARTESIAN_POINT('',(22.25,-6.25,1.5106)); +#10625 = VECTOR('',#10626,1.); +#10626 = DIRECTION('',(0.,0.,1.)); +#10627 = PLANE('',#10628); +#10628 = AXIS2_PLACEMENT_3D('',#10629,#10630,#10631); +#10629 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#10630 = DIRECTION('',(-0.,1.,0.)); +#10631 = DIRECTION('',(0.,0.,1.)); +#10632 = ADVANCED_FACE('',(#10633),#10644,.T.); +#10633 = FACE_BOUND('',#10634,.T.); +#10634 = EDGE_LOOP('',(#10635,#10636,#10642,#10643)); +#10635 = ORIENTED_EDGE('',*,*,#10622,.F.); +#10636 = ORIENTED_EDGE('',*,*,#10637,.T.); +#10637 = EDGE_CURVE('',#10613,#10589,#10638,.T.); +#10638 = LINE('',#10639,#10640); +#10639 = CARTESIAN_POINT('',(22.25,-6.25,1.5106)); +#10640 = VECTOR('',#10641,1.); +#10641 = DIRECTION('',(-0.,1.,0.)); +#10642 = ORIENTED_EDGE('',*,*,#10598,.T.); +#10643 = ORIENTED_EDGE('',*,*,#9493,.F.); +#10644 = PLANE('',#10645); +#10645 = AXIS2_PLACEMENT_3D('',#10646,#10647,#10648); +#10646 = CARTESIAN_POINT('',(22.25,-6.25,1.5106)); +#10647 = DIRECTION('',(1.,0.,-0.)); +#10648 = DIRECTION('',(0.,0.,1.)); +#10649 = ADVANCED_FACE('',(#10650),#10675,.F.); +#10650 = FACE_BOUND('',#10651,.F.); +#10651 = EDGE_LOOP('',(#10652,#10660,#10668,#10674)); +#10652 = ORIENTED_EDGE('',*,*,#10653,.F.); +#10653 = EDGE_CURVE('',#10654,#9510,#10656,.T.); +#10654 = VERTEX_POINT('',#10655); +#10655 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10656 = LINE('',#10657,#10658); +#10657 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10658 = VECTOR('',#10659,1.); +#10659 = DIRECTION('',(0.,0.,1.)); +#10660 = ORIENTED_EDGE('',*,*,#10661,.T.); +#10661 = EDGE_CURVE('',#10654,#10662,#10664,.T.); +#10662 = VERTEX_POINT('',#10663); +#10663 = CARTESIAN_POINT('',(21.75,-3.75,1.5106)); +#10664 = LINE('',#10665,#10666); +#10665 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10666 = VECTOR('',#10667,1.); +#10667 = DIRECTION('',(-0.,1.,0.)); +#10668 = ORIENTED_EDGE('',*,*,#10669,.T.); +#10669 = EDGE_CURVE('',#10662,#9512,#10670,.T.); +#10670 = LINE('',#10671,#10672); +#10671 = CARTESIAN_POINT('',(21.75,-3.75,1.5106)); +#10672 = VECTOR('',#10673,1.); +#10673 = DIRECTION('',(0.,0.,1.)); +#10674 = ORIENTED_EDGE('',*,*,#9509,.F.); +#10675 = PLANE('',#10676); +#10676 = AXIS2_PLACEMENT_3D('',#10677,#10678,#10679); +#10677 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10678 = DIRECTION('',(1.,0.,-0.)); +#10679 = DIRECTION('',(0.,0.,1.)); +#10680 = ADVANCED_FACE('',(#10681),#10699,.T.); +#10681 = FACE_BOUND('',#10682,.T.); +#10682 = EDGE_LOOP('',(#10683,#10691,#10692,#10693)); +#10683 = ORIENTED_EDGE('',*,*,#10684,.F.); +#10684 = EDGE_CURVE('',#10662,#10685,#10687,.T.); +#10685 = VERTEX_POINT('',#10686); +#10686 = CARTESIAN_POINT('',(22.25,-3.75,1.5106)); +#10687 = LINE('',#10688,#10689); +#10688 = CARTESIAN_POINT('',(21.75,-3.75,1.5106)); +#10689 = VECTOR('',#10690,1.); +#10690 = DIRECTION('',(1.,0.,-0.)); +#10691 = ORIENTED_EDGE('',*,*,#10669,.T.); +#10692 = ORIENTED_EDGE('',*,*,#9519,.T.); +#10693 = ORIENTED_EDGE('',*,*,#10694,.F.); +#10694 = EDGE_CURVE('',#10685,#9520,#10695,.T.); +#10695 = LINE('',#10696,#10697); +#10696 = CARTESIAN_POINT('',(22.25,-3.75,1.5106)); +#10697 = VECTOR('',#10698,1.); +#10698 = DIRECTION('',(0.,0.,1.)); +#10699 = PLANE('',#10700); +#10700 = AXIS2_PLACEMENT_3D('',#10701,#10702,#10703); +#10701 = CARTESIAN_POINT('',(21.75,-3.75,1.5106)); +#10702 = DIRECTION('',(-0.,1.,0.)); +#10703 = DIRECTION('',(0.,0.,1.)); +#10704 = ADVANCED_FACE('',(#10705),#10723,.F.); +#10705 = FACE_BOUND('',#10706,.F.); +#10706 = EDGE_LOOP('',(#10707,#10715,#10716,#10717)); +#10707 = ORIENTED_EDGE('',*,*,#10708,.F.); +#10708 = EDGE_CURVE('',#10654,#10709,#10711,.T.); +#10709 = VERTEX_POINT('',#10710); +#10710 = CARTESIAN_POINT('',(22.25,-4.25,1.5106)); +#10711 = LINE('',#10712,#10713); +#10712 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10713 = VECTOR('',#10714,1.); +#10714 = DIRECTION('',(1.,0.,-0.)); +#10715 = ORIENTED_EDGE('',*,*,#10653,.T.); +#10716 = ORIENTED_EDGE('',*,*,#9535,.T.); +#10717 = ORIENTED_EDGE('',*,*,#10718,.F.); +#10718 = EDGE_CURVE('',#10709,#9528,#10719,.T.); +#10719 = LINE('',#10720,#10721); +#10720 = CARTESIAN_POINT('',(22.25,-4.25,1.5106)); +#10721 = VECTOR('',#10722,1.); +#10722 = DIRECTION('',(0.,0.,1.)); +#10723 = PLANE('',#10724); +#10724 = AXIS2_PLACEMENT_3D('',#10725,#10726,#10727); +#10725 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#10726 = DIRECTION('',(-0.,1.,0.)); +#10727 = DIRECTION('',(0.,0.,1.)); +#10728 = ADVANCED_FACE('',(#10729),#10740,.T.); +#10729 = FACE_BOUND('',#10730,.T.); +#10730 = EDGE_LOOP('',(#10731,#10732,#10738,#10739)); +#10731 = ORIENTED_EDGE('',*,*,#10718,.F.); +#10732 = ORIENTED_EDGE('',*,*,#10733,.T.); +#10733 = EDGE_CURVE('',#10709,#10685,#10734,.T.); +#10734 = LINE('',#10735,#10736); +#10735 = CARTESIAN_POINT('',(22.25,-4.25,1.5106)); +#10736 = VECTOR('',#10737,1.); +#10737 = DIRECTION('',(-0.,1.,0.)); +#10738 = ORIENTED_EDGE('',*,*,#10694,.T.); +#10739 = ORIENTED_EDGE('',*,*,#9527,.F.); +#10740 = PLANE('',#10741); +#10741 = AXIS2_PLACEMENT_3D('',#10742,#10743,#10744); +#10742 = CARTESIAN_POINT('',(22.25,-4.25,1.5106)); +#10743 = DIRECTION('',(1.,0.,-0.)); +#10744 = DIRECTION('',(0.,0.,1.)); +#10745 = ADVANCED_FACE('',(#10746),#10771,.F.); +#10746 = FACE_BOUND('',#10747,.F.); +#10747 = EDGE_LOOP('',(#10748,#10756,#10764,#10770)); +#10748 = ORIENTED_EDGE('',*,*,#10749,.F.); +#10749 = EDGE_CURVE('',#10750,#9544,#10752,.T.); +#10750 = VERTEX_POINT('',#10751); +#10751 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10752 = LINE('',#10753,#10754); +#10753 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10754 = VECTOR('',#10755,1.); +#10755 = DIRECTION('',(0.,0.,1.)); +#10756 = ORIENTED_EDGE('',*,*,#10757,.T.); +#10757 = EDGE_CURVE('',#10750,#10758,#10760,.T.); +#10758 = VERTEX_POINT('',#10759); +#10759 = CARTESIAN_POINT('',(21.75,-1.75,1.5106)); +#10760 = LINE('',#10761,#10762); +#10761 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10762 = VECTOR('',#10763,1.); +#10763 = DIRECTION('',(-0.,1.,0.)); +#10764 = ORIENTED_EDGE('',*,*,#10765,.T.); +#10765 = EDGE_CURVE('',#10758,#9546,#10766,.T.); +#10766 = LINE('',#10767,#10768); +#10767 = CARTESIAN_POINT('',(21.75,-1.75,1.5106)); +#10768 = VECTOR('',#10769,1.); +#10769 = DIRECTION('',(0.,0.,1.)); +#10770 = ORIENTED_EDGE('',*,*,#9543,.F.); +#10771 = PLANE('',#10772); +#10772 = AXIS2_PLACEMENT_3D('',#10773,#10774,#10775); +#10773 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10774 = DIRECTION('',(1.,0.,-0.)); +#10775 = DIRECTION('',(0.,0.,1.)); +#10776 = ADVANCED_FACE('',(#10777),#10795,.T.); +#10777 = FACE_BOUND('',#10778,.T.); +#10778 = EDGE_LOOP('',(#10779,#10787,#10788,#10789)); +#10779 = ORIENTED_EDGE('',*,*,#10780,.F.); +#10780 = EDGE_CURVE('',#10758,#10781,#10783,.T.); +#10781 = VERTEX_POINT('',#10782); +#10782 = CARTESIAN_POINT('',(22.25,-1.75,1.5106)); +#10783 = LINE('',#10784,#10785); +#10784 = CARTESIAN_POINT('',(21.75,-1.75,1.5106)); +#10785 = VECTOR('',#10786,1.); +#10786 = DIRECTION('',(1.,0.,-0.)); +#10787 = ORIENTED_EDGE('',*,*,#10765,.T.); +#10788 = ORIENTED_EDGE('',*,*,#9553,.T.); +#10789 = ORIENTED_EDGE('',*,*,#10790,.F.); +#10790 = EDGE_CURVE('',#10781,#9554,#10791,.T.); +#10791 = LINE('',#10792,#10793); +#10792 = CARTESIAN_POINT('',(22.25,-1.75,1.5106)); +#10793 = VECTOR('',#10794,1.); +#10794 = DIRECTION('',(0.,0.,1.)); +#10795 = PLANE('',#10796); +#10796 = AXIS2_PLACEMENT_3D('',#10797,#10798,#10799); +#10797 = CARTESIAN_POINT('',(21.75,-1.75,1.5106)); +#10798 = DIRECTION('',(-0.,1.,0.)); +#10799 = DIRECTION('',(0.,0.,1.)); +#10800 = ADVANCED_FACE('',(#10801),#10819,.F.); +#10801 = FACE_BOUND('',#10802,.F.); +#10802 = EDGE_LOOP('',(#10803,#10811,#10812,#10813)); +#10803 = ORIENTED_EDGE('',*,*,#10804,.F.); +#10804 = EDGE_CURVE('',#10750,#10805,#10807,.T.); +#10805 = VERTEX_POINT('',#10806); +#10806 = CARTESIAN_POINT('',(22.25,-2.25,1.5106)); +#10807 = LINE('',#10808,#10809); +#10808 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10809 = VECTOR('',#10810,1.); +#10810 = DIRECTION('',(1.,0.,-0.)); +#10811 = ORIENTED_EDGE('',*,*,#10749,.T.); +#10812 = ORIENTED_EDGE('',*,*,#9569,.T.); +#10813 = ORIENTED_EDGE('',*,*,#10814,.F.); +#10814 = EDGE_CURVE('',#10805,#9562,#10815,.T.); +#10815 = LINE('',#10816,#10817); +#10816 = CARTESIAN_POINT('',(22.25,-2.25,1.5106)); +#10817 = VECTOR('',#10818,1.); +#10818 = DIRECTION('',(0.,0.,1.)); +#10819 = PLANE('',#10820); +#10820 = AXIS2_PLACEMENT_3D('',#10821,#10822,#10823); +#10821 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#10822 = DIRECTION('',(-0.,1.,0.)); +#10823 = DIRECTION('',(0.,0.,1.)); +#10824 = ADVANCED_FACE('',(#10825),#10836,.T.); +#10825 = FACE_BOUND('',#10826,.T.); +#10826 = EDGE_LOOP('',(#10827,#10828,#10834,#10835)); +#10827 = ORIENTED_EDGE('',*,*,#10814,.F.); +#10828 = ORIENTED_EDGE('',*,*,#10829,.T.); +#10829 = EDGE_CURVE('',#10805,#10781,#10830,.T.); +#10830 = LINE('',#10831,#10832); +#10831 = CARTESIAN_POINT('',(22.25,-2.25,1.5106)); +#10832 = VECTOR('',#10833,1.); +#10833 = DIRECTION('',(-0.,1.,0.)); +#10834 = ORIENTED_EDGE('',*,*,#10790,.T.); +#10835 = ORIENTED_EDGE('',*,*,#9561,.F.); +#10836 = PLANE('',#10837); +#10837 = AXIS2_PLACEMENT_3D('',#10838,#10839,#10840); +#10838 = CARTESIAN_POINT('',(22.25,-2.25,1.5106)); +#10839 = DIRECTION('',(1.,0.,-0.)); +#10840 = DIRECTION('',(0.,0.,1.)); +#10841 = ADVANCED_FACE('',(#10842),#10867,.F.); +#10842 = FACE_BOUND('',#10843,.F.); +#10843 = EDGE_LOOP('',(#10844,#10852,#10860,#10866)); +#10844 = ORIENTED_EDGE('',*,*,#10845,.F.); +#10845 = EDGE_CURVE('',#10846,#9578,#10848,.T.); +#10846 = VERTEX_POINT('',#10847); +#10847 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10848 = LINE('',#10849,#10850); +#10849 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10850 = VECTOR('',#10851,1.); +#10851 = DIRECTION('',(0.,0.,1.)); +#10852 = ORIENTED_EDGE('',*,*,#10853,.T.); +#10853 = EDGE_CURVE('',#10846,#10854,#10856,.T.); +#10854 = VERTEX_POINT('',#10855); +#10855 = CARTESIAN_POINT('',(21.75,0.25,1.5106)); +#10856 = LINE('',#10857,#10858); +#10857 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10858 = VECTOR('',#10859,1.); +#10859 = DIRECTION('',(-0.,1.,0.)); +#10860 = ORIENTED_EDGE('',*,*,#10861,.T.); +#10861 = EDGE_CURVE('',#10854,#9580,#10862,.T.); +#10862 = LINE('',#10863,#10864); +#10863 = CARTESIAN_POINT('',(21.75,0.25,1.5106)); +#10864 = VECTOR('',#10865,1.); +#10865 = DIRECTION('',(0.,0.,1.)); +#10866 = ORIENTED_EDGE('',*,*,#9577,.F.); +#10867 = PLANE('',#10868); +#10868 = AXIS2_PLACEMENT_3D('',#10869,#10870,#10871); +#10869 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10870 = DIRECTION('',(1.,0.,-0.)); +#10871 = DIRECTION('',(0.,0.,1.)); +#10872 = ADVANCED_FACE('',(#10873),#10891,.T.); +#10873 = FACE_BOUND('',#10874,.T.); +#10874 = EDGE_LOOP('',(#10875,#10883,#10884,#10885)); +#10875 = ORIENTED_EDGE('',*,*,#10876,.F.); +#10876 = EDGE_CURVE('',#10854,#10877,#10879,.T.); +#10877 = VERTEX_POINT('',#10878); +#10878 = CARTESIAN_POINT('',(22.25,0.25,1.5106)); +#10879 = LINE('',#10880,#10881); +#10880 = CARTESIAN_POINT('',(21.75,0.25,1.5106)); +#10881 = VECTOR('',#10882,1.); +#10882 = DIRECTION('',(1.,0.,-0.)); +#10883 = ORIENTED_EDGE('',*,*,#10861,.T.); +#10884 = ORIENTED_EDGE('',*,*,#9587,.T.); +#10885 = ORIENTED_EDGE('',*,*,#10886,.F.); +#10886 = EDGE_CURVE('',#10877,#9588,#10887,.T.); +#10887 = LINE('',#10888,#10889); +#10888 = CARTESIAN_POINT('',(22.25,0.25,1.5106)); +#10889 = VECTOR('',#10890,1.); +#10890 = DIRECTION('',(0.,0.,1.)); +#10891 = PLANE('',#10892); +#10892 = AXIS2_PLACEMENT_3D('',#10893,#10894,#10895); +#10893 = CARTESIAN_POINT('',(21.75,0.25,1.5106)); +#10894 = DIRECTION('',(-0.,1.,0.)); +#10895 = DIRECTION('',(0.,0.,1.)); +#10896 = ADVANCED_FACE('',(#10897),#10915,.F.); +#10897 = FACE_BOUND('',#10898,.F.); +#10898 = EDGE_LOOP('',(#10899,#10907,#10908,#10909)); +#10899 = ORIENTED_EDGE('',*,*,#10900,.F.); +#10900 = EDGE_CURVE('',#10846,#10901,#10903,.T.); +#10901 = VERTEX_POINT('',#10902); +#10902 = CARTESIAN_POINT('',(22.25,-0.25,1.5106)); +#10903 = LINE('',#10904,#10905); +#10904 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10905 = VECTOR('',#10906,1.); +#10906 = DIRECTION('',(1.,0.,-0.)); +#10907 = ORIENTED_EDGE('',*,*,#10845,.T.); +#10908 = ORIENTED_EDGE('',*,*,#9603,.T.); +#10909 = ORIENTED_EDGE('',*,*,#10910,.F.); +#10910 = EDGE_CURVE('',#10901,#9596,#10911,.T.); +#10911 = LINE('',#10912,#10913); +#10912 = CARTESIAN_POINT('',(22.25,-0.25,1.5106)); +#10913 = VECTOR('',#10914,1.); +#10914 = DIRECTION('',(0.,0.,1.)); +#10915 = PLANE('',#10916); +#10916 = AXIS2_PLACEMENT_3D('',#10917,#10918,#10919); +#10917 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#10918 = DIRECTION('',(-0.,1.,0.)); +#10919 = DIRECTION('',(0.,0.,1.)); +#10920 = ADVANCED_FACE('',(#10921),#10932,.T.); +#10921 = FACE_BOUND('',#10922,.T.); +#10922 = EDGE_LOOP('',(#10923,#10924,#10930,#10931)); +#10923 = ORIENTED_EDGE('',*,*,#10910,.F.); +#10924 = ORIENTED_EDGE('',*,*,#10925,.T.); +#10925 = EDGE_CURVE('',#10901,#10877,#10926,.T.); +#10926 = LINE('',#10927,#10928); +#10927 = CARTESIAN_POINT('',(22.25,-0.25,1.5106)); +#10928 = VECTOR('',#10929,1.); +#10929 = DIRECTION('',(-0.,1.,0.)); +#10930 = ORIENTED_EDGE('',*,*,#10886,.T.); +#10931 = ORIENTED_EDGE('',*,*,#9595,.F.); +#10932 = PLANE('',#10933); +#10933 = AXIS2_PLACEMENT_3D('',#10934,#10935,#10936); +#10934 = CARTESIAN_POINT('',(22.25,-0.25,1.5106)); +#10935 = DIRECTION('',(1.,0.,-0.)); +#10936 = DIRECTION('',(0.,0.,1.)); +#10937 = ADVANCED_FACE('',(#10938),#10963,.F.); +#10938 = FACE_BOUND('',#10939,.F.); +#10939 = EDGE_LOOP('',(#10940,#10948,#10956,#10962)); +#10940 = ORIENTED_EDGE('',*,*,#10941,.F.); +#10941 = EDGE_CURVE('',#10942,#9624,#10944,.T.); +#10942 = VERTEX_POINT('',#10943); +#10943 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10944 = LINE('',#10945,#10946); +#10945 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10946 = VECTOR('',#10947,1.); +#10947 = DIRECTION('',(0.,0.,1.)); +#10948 = ORIENTED_EDGE('',*,*,#10949,.T.); +#10949 = EDGE_CURVE('',#10942,#10950,#10952,.T.); +#10950 = VERTEX_POINT('',#10951); +#10951 = CARTESIAN_POINT('',(-0.25,-17.75,1.5106)); +#10952 = LINE('',#10953,#10954); +#10953 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10954 = VECTOR('',#10955,1.); +#10955 = DIRECTION('',(-0.,1.,0.)); +#10956 = ORIENTED_EDGE('',*,*,#10957,.T.); +#10957 = EDGE_CURVE('',#10950,#9626,#10958,.T.); +#10958 = LINE('',#10959,#10960); +#10959 = CARTESIAN_POINT('',(-0.25,-17.75,1.5106)); +#10960 = VECTOR('',#10961,1.); +#10961 = DIRECTION('',(0.,0.,1.)); +#10962 = ORIENTED_EDGE('',*,*,#9623,.F.); +#10963 = PLANE('',#10964); +#10964 = AXIS2_PLACEMENT_3D('',#10965,#10966,#10967); +#10965 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10966 = DIRECTION('',(1.,0.,-0.)); +#10967 = DIRECTION('',(0.,0.,1.)); +#10968 = ADVANCED_FACE('',(#10969),#10987,.F.); +#10969 = FACE_BOUND('',#10970,.F.); +#10970 = EDGE_LOOP('',(#10971,#10979,#10980,#10981)); +#10971 = ORIENTED_EDGE('',*,*,#10972,.F.); +#10972 = EDGE_CURVE('',#10942,#10973,#10975,.T.); +#10973 = VERTEX_POINT('',#10974); +#10974 = CARTESIAN_POINT('',(0.25,-18.25,1.5106)); +#10975 = LINE('',#10976,#10977); +#10976 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10977 = VECTOR('',#10978,1.); +#10978 = DIRECTION('',(1.,0.,-0.)); +#10979 = ORIENTED_EDGE('',*,*,#10941,.T.); +#10980 = ORIENTED_EDGE('',*,*,#9649,.T.); +#10981 = ORIENTED_EDGE('',*,*,#10982,.F.); +#10982 = EDGE_CURVE('',#10973,#9642,#10983,.T.); +#10983 = LINE('',#10984,#10985); +#10984 = CARTESIAN_POINT('',(0.25,-18.25,1.5106)); +#10985 = VECTOR('',#10986,1.); +#10986 = DIRECTION('',(0.,0.,1.)); +#10987 = PLANE('',#10988); +#10988 = AXIS2_PLACEMENT_3D('',#10989,#10990,#10991); +#10989 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#10990 = DIRECTION('',(-0.,1.,0.)); +#10991 = DIRECTION('',(0.,0.,1.)); +#10992 = ADVANCED_FACE('',(#10993),#11011,.T.); +#10993 = FACE_BOUND('',#10994,.T.); +#10994 = EDGE_LOOP('',(#10995,#10996,#11004,#11010)); +#10995 = ORIENTED_EDGE('',*,*,#10982,.F.); +#10996 = ORIENTED_EDGE('',*,*,#10997,.T.); +#10997 = EDGE_CURVE('',#10973,#10998,#11000,.T.); +#10998 = VERTEX_POINT('',#10999); +#10999 = CARTESIAN_POINT('',(0.25,-17.75,1.5106)); +#11000 = LINE('',#11001,#11002); +#11001 = CARTESIAN_POINT('',(0.25,-18.25,1.5106)); +#11002 = VECTOR('',#11003,1.); +#11003 = DIRECTION('',(-0.,1.,0.)); +#11004 = ORIENTED_EDGE('',*,*,#11005,.T.); +#11005 = EDGE_CURVE('',#10998,#9634,#11006,.T.); +#11006 = LINE('',#11007,#11008); +#11007 = CARTESIAN_POINT('',(0.25,-17.75,1.5106)); +#11008 = VECTOR('',#11009,1.); +#11009 = DIRECTION('',(0.,0.,1.)); +#11010 = ORIENTED_EDGE('',*,*,#9641,.F.); +#11011 = PLANE('',#11012); +#11012 = AXIS2_PLACEMENT_3D('',#11013,#11014,#11015); +#11013 = CARTESIAN_POINT('',(0.25,-18.25,1.5106)); +#11014 = DIRECTION('',(1.,0.,-0.)); +#11015 = DIRECTION('',(0.,0.,1.)); +#11016 = ADVANCED_FACE('',(#11017),#11028,.T.); +#11017 = FACE_BOUND('',#11018,.T.); +#11018 = EDGE_LOOP('',(#11019,#11025,#11026,#11027)); +#11019 = ORIENTED_EDGE('',*,*,#11020,.F.); +#11020 = EDGE_CURVE('',#10950,#10998,#11021,.T.); +#11021 = LINE('',#11022,#11023); +#11022 = CARTESIAN_POINT('',(-0.25,-17.75,1.5106)); +#11023 = VECTOR('',#11024,1.); +#11024 = DIRECTION('',(1.,0.,-0.)); +#11025 = ORIENTED_EDGE('',*,*,#10957,.T.); +#11026 = ORIENTED_EDGE('',*,*,#9633,.T.); +#11027 = ORIENTED_EDGE('',*,*,#11005,.F.); +#11028 = PLANE('',#11029); +#11029 = AXIS2_PLACEMENT_3D('',#11030,#11031,#11032); +#11030 = CARTESIAN_POINT('',(-0.25,-17.75,1.5106)); +#11031 = DIRECTION('',(-0.,1.,0.)); +#11032 = DIRECTION('',(0.,0.,1.)); +#11033 = ADVANCED_FACE('',(#11034),#11059,.F.); +#11034 = FACE_BOUND('',#11035,.F.); +#11035 = EDGE_LOOP('',(#11036,#11044,#11052,#11058)); +#11036 = ORIENTED_EDGE('',*,*,#11037,.F.); +#11037 = EDGE_CURVE('',#11038,#9658,#11040,.T.); +#11038 = VERTEX_POINT('',#11039); +#11039 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11040 = LINE('',#11041,#11042); +#11041 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11042 = VECTOR('',#11043,1.); +#11043 = DIRECTION('',(0.,0.,1.)); +#11044 = ORIENTED_EDGE('',*,*,#11045,.T.); +#11045 = EDGE_CURVE('',#11038,#11046,#11048,.T.); +#11046 = VERTEX_POINT('',#11047); +#11047 = CARTESIAN_POINT('',(-0.25,-15.75,1.5106)); +#11048 = LINE('',#11049,#11050); +#11049 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11050 = VECTOR('',#11051,1.); +#11051 = DIRECTION('',(-0.,1.,0.)); +#11052 = ORIENTED_EDGE('',*,*,#11053,.T.); +#11053 = EDGE_CURVE('',#11046,#9660,#11054,.T.); +#11054 = LINE('',#11055,#11056); +#11055 = CARTESIAN_POINT('',(-0.25,-15.75,1.5106)); +#11056 = VECTOR('',#11057,1.); +#11057 = DIRECTION('',(0.,0.,1.)); +#11058 = ORIENTED_EDGE('',*,*,#9657,.F.); +#11059 = PLANE('',#11060); +#11060 = AXIS2_PLACEMENT_3D('',#11061,#11062,#11063); +#11061 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11062 = DIRECTION('',(1.,0.,-0.)); +#11063 = DIRECTION('',(0.,0.,1.)); +#11064 = ADVANCED_FACE('',(#11065),#11083,.T.); +#11065 = FACE_BOUND('',#11066,.T.); +#11066 = EDGE_LOOP('',(#11067,#11075,#11076,#11077)); +#11067 = ORIENTED_EDGE('',*,*,#11068,.F.); +#11068 = EDGE_CURVE('',#11046,#11069,#11071,.T.); +#11069 = VERTEX_POINT('',#11070); +#11070 = CARTESIAN_POINT('',(0.25,-15.75,1.5106)); +#11071 = LINE('',#11072,#11073); +#11072 = CARTESIAN_POINT('',(-0.25,-15.75,1.5106)); +#11073 = VECTOR('',#11074,1.); +#11074 = DIRECTION('',(1.,0.,-0.)); +#11075 = ORIENTED_EDGE('',*,*,#11053,.T.); +#11076 = ORIENTED_EDGE('',*,*,#9667,.T.); +#11077 = ORIENTED_EDGE('',*,*,#11078,.F.); +#11078 = EDGE_CURVE('',#11069,#9668,#11079,.T.); +#11079 = LINE('',#11080,#11081); +#11080 = CARTESIAN_POINT('',(0.25,-15.75,1.5106)); +#11081 = VECTOR('',#11082,1.); +#11082 = DIRECTION('',(0.,0.,1.)); +#11083 = PLANE('',#11084); +#11084 = AXIS2_PLACEMENT_3D('',#11085,#11086,#11087); +#11085 = CARTESIAN_POINT('',(-0.25,-15.75,1.5106)); +#11086 = DIRECTION('',(-0.,1.,0.)); +#11087 = DIRECTION('',(0.,0.,1.)); +#11088 = ADVANCED_FACE('',(#11089),#11107,.F.); +#11089 = FACE_BOUND('',#11090,.F.); +#11090 = EDGE_LOOP('',(#11091,#11099,#11100,#11101)); +#11091 = ORIENTED_EDGE('',*,*,#11092,.F.); +#11092 = EDGE_CURVE('',#11038,#11093,#11095,.T.); +#11093 = VERTEX_POINT('',#11094); +#11094 = CARTESIAN_POINT('',(0.25,-16.25,1.5106)); +#11095 = LINE('',#11096,#11097); +#11096 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11097 = VECTOR('',#11098,1.); +#11098 = DIRECTION('',(1.,0.,-0.)); +#11099 = ORIENTED_EDGE('',*,*,#11037,.T.); +#11100 = ORIENTED_EDGE('',*,*,#9683,.T.); +#11101 = ORIENTED_EDGE('',*,*,#11102,.F.); +#11102 = EDGE_CURVE('',#11093,#9676,#11103,.T.); +#11103 = LINE('',#11104,#11105); +#11104 = CARTESIAN_POINT('',(0.25,-16.25,1.5106)); +#11105 = VECTOR('',#11106,1.); +#11106 = DIRECTION('',(0.,0.,1.)); +#11107 = PLANE('',#11108); +#11108 = AXIS2_PLACEMENT_3D('',#11109,#11110,#11111); +#11109 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#11110 = DIRECTION('',(-0.,1.,0.)); +#11111 = DIRECTION('',(0.,0.,1.)); +#11112 = ADVANCED_FACE('',(#11113),#11124,.T.); +#11113 = FACE_BOUND('',#11114,.T.); +#11114 = EDGE_LOOP('',(#11115,#11116,#11122,#11123)); +#11115 = ORIENTED_EDGE('',*,*,#11102,.F.); +#11116 = ORIENTED_EDGE('',*,*,#11117,.T.); +#11117 = EDGE_CURVE('',#11093,#11069,#11118,.T.); +#11118 = LINE('',#11119,#11120); +#11119 = CARTESIAN_POINT('',(0.25,-16.25,1.5106)); +#11120 = VECTOR('',#11121,1.); +#11121 = DIRECTION('',(-0.,1.,0.)); +#11122 = ORIENTED_EDGE('',*,*,#11078,.T.); +#11123 = ORIENTED_EDGE('',*,*,#9675,.F.); +#11124 = PLANE('',#11125); +#11125 = AXIS2_PLACEMENT_3D('',#11126,#11127,#11128); +#11126 = CARTESIAN_POINT('',(0.25,-16.25,1.5106)); +#11127 = DIRECTION('',(1.,0.,-0.)); +#11128 = DIRECTION('',(0.,0.,1.)); +#11129 = ADVANCED_FACE('',(#11130),#11155,.F.); +#11130 = FACE_BOUND('',#11131,.F.); +#11131 = EDGE_LOOP('',(#11132,#11140,#11148,#11154)); +#11132 = ORIENTED_EDGE('',*,*,#11133,.F.); +#11133 = EDGE_CURVE('',#11134,#9692,#11136,.T.); +#11134 = VERTEX_POINT('',#11135); +#11135 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11136 = LINE('',#11137,#11138); +#11137 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11138 = VECTOR('',#11139,1.); +#11139 = DIRECTION('',(0.,0.,1.)); +#11140 = ORIENTED_EDGE('',*,*,#11141,.T.); +#11141 = EDGE_CURVE('',#11134,#11142,#11144,.T.); +#11142 = VERTEX_POINT('',#11143); +#11143 = CARTESIAN_POINT('',(-0.25,-13.75,1.5106)); +#11144 = LINE('',#11145,#11146); +#11145 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11146 = VECTOR('',#11147,1.); +#11147 = DIRECTION('',(-0.,1.,0.)); +#11148 = ORIENTED_EDGE('',*,*,#11149,.T.); +#11149 = EDGE_CURVE('',#11142,#9694,#11150,.T.); +#11150 = LINE('',#11151,#11152); +#11151 = CARTESIAN_POINT('',(-0.25,-13.75,1.5106)); +#11152 = VECTOR('',#11153,1.); +#11153 = DIRECTION('',(0.,0.,1.)); +#11154 = ORIENTED_EDGE('',*,*,#9691,.F.); +#11155 = PLANE('',#11156); +#11156 = AXIS2_PLACEMENT_3D('',#11157,#11158,#11159); +#11157 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11158 = DIRECTION('',(1.,0.,-0.)); +#11159 = DIRECTION('',(0.,0.,1.)); +#11160 = ADVANCED_FACE('',(#11161),#11179,.T.); +#11161 = FACE_BOUND('',#11162,.T.); +#11162 = EDGE_LOOP('',(#11163,#11171,#11172,#11173)); +#11163 = ORIENTED_EDGE('',*,*,#11164,.F.); +#11164 = EDGE_CURVE('',#11142,#11165,#11167,.T.); +#11165 = VERTEX_POINT('',#11166); +#11166 = CARTESIAN_POINT('',(0.25,-13.75,1.5106)); +#11167 = LINE('',#11168,#11169); +#11168 = CARTESIAN_POINT('',(-0.25,-13.75,1.5106)); +#11169 = VECTOR('',#11170,1.); +#11170 = DIRECTION('',(1.,0.,-0.)); +#11171 = ORIENTED_EDGE('',*,*,#11149,.T.); +#11172 = ORIENTED_EDGE('',*,*,#9701,.T.); +#11173 = ORIENTED_EDGE('',*,*,#11174,.F.); +#11174 = EDGE_CURVE('',#11165,#9702,#11175,.T.); +#11175 = LINE('',#11176,#11177); +#11176 = CARTESIAN_POINT('',(0.25,-13.75,1.5106)); +#11177 = VECTOR('',#11178,1.); +#11178 = DIRECTION('',(0.,0.,1.)); +#11179 = PLANE('',#11180); +#11180 = AXIS2_PLACEMENT_3D('',#11181,#11182,#11183); +#11181 = CARTESIAN_POINT('',(-0.25,-13.75,1.5106)); +#11182 = DIRECTION('',(-0.,1.,0.)); +#11183 = DIRECTION('',(0.,0.,1.)); +#11184 = ADVANCED_FACE('',(#11185),#11203,.F.); +#11185 = FACE_BOUND('',#11186,.F.); +#11186 = EDGE_LOOP('',(#11187,#11195,#11196,#11197)); +#11187 = ORIENTED_EDGE('',*,*,#11188,.F.); +#11188 = EDGE_CURVE('',#11134,#11189,#11191,.T.); +#11189 = VERTEX_POINT('',#11190); +#11190 = CARTESIAN_POINT('',(0.25,-14.25,1.5106)); +#11191 = LINE('',#11192,#11193); +#11192 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11193 = VECTOR('',#11194,1.); +#11194 = DIRECTION('',(1.,0.,-0.)); +#11195 = ORIENTED_EDGE('',*,*,#11133,.T.); +#11196 = ORIENTED_EDGE('',*,*,#9717,.T.); +#11197 = ORIENTED_EDGE('',*,*,#11198,.F.); +#11198 = EDGE_CURVE('',#11189,#9710,#11199,.T.); +#11199 = LINE('',#11200,#11201); +#11200 = CARTESIAN_POINT('',(0.25,-14.25,1.5106)); +#11201 = VECTOR('',#11202,1.); +#11202 = DIRECTION('',(0.,0.,1.)); +#11203 = PLANE('',#11204); +#11204 = AXIS2_PLACEMENT_3D('',#11205,#11206,#11207); +#11205 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#11206 = DIRECTION('',(-0.,1.,0.)); +#11207 = DIRECTION('',(0.,0.,1.)); +#11208 = ADVANCED_FACE('',(#11209),#11220,.T.); +#11209 = FACE_BOUND('',#11210,.T.); +#11210 = EDGE_LOOP('',(#11211,#11212,#11218,#11219)); +#11211 = ORIENTED_EDGE('',*,*,#11198,.F.); +#11212 = ORIENTED_EDGE('',*,*,#11213,.T.); +#11213 = EDGE_CURVE('',#11189,#11165,#11214,.T.); +#11214 = LINE('',#11215,#11216); +#11215 = CARTESIAN_POINT('',(0.25,-14.25,1.5106)); +#11216 = VECTOR('',#11217,1.); +#11217 = DIRECTION('',(-0.,1.,0.)); +#11218 = ORIENTED_EDGE('',*,*,#11174,.T.); +#11219 = ORIENTED_EDGE('',*,*,#9709,.F.); +#11220 = PLANE('',#11221); +#11221 = AXIS2_PLACEMENT_3D('',#11222,#11223,#11224); +#11222 = CARTESIAN_POINT('',(0.25,-14.25,1.5106)); +#11223 = DIRECTION('',(1.,0.,-0.)); +#11224 = DIRECTION('',(0.,0.,1.)); +#11225 = ADVANCED_FACE('',(#11226),#11251,.F.); +#11226 = FACE_BOUND('',#11227,.F.); +#11227 = EDGE_LOOP('',(#11228,#11236,#11244,#11250)); +#11228 = ORIENTED_EDGE('',*,*,#11229,.F.); +#11229 = EDGE_CURVE('',#11230,#9726,#11232,.T.); +#11230 = VERTEX_POINT('',#11231); +#11231 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11232 = LINE('',#11233,#11234); +#11233 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11234 = VECTOR('',#11235,1.); +#11235 = DIRECTION('',(0.,0.,1.)); +#11236 = ORIENTED_EDGE('',*,*,#11237,.T.); +#11237 = EDGE_CURVE('',#11230,#11238,#11240,.T.); +#11238 = VERTEX_POINT('',#11239); +#11239 = CARTESIAN_POINT('',(-0.25,-11.75,1.5106)); +#11240 = LINE('',#11241,#11242); +#11241 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11242 = VECTOR('',#11243,1.); +#11243 = DIRECTION('',(-0.,1.,0.)); +#11244 = ORIENTED_EDGE('',*,*,#11245,.T.); +#11245 = EDGE_CURVE('',#11238,#9728,#11246,.T.); +#11246 = LINE('',#11247,#11248); +#11247 = CARTESIAN_POINT('',(-0.25,-11.75,1.5106)); +#11248 = VECTOR('',#11249,1.); +#11249 = DIRECTION('',(0.,0.,1.)); +#11250 = ORIENTED_EDGE('',*,*,#9725,.F.); +#11251 = PLANE('',#11252); +#11252 = AXIS2_PLACEMENT_3D('',#11253,#11254,#11255); +#11253 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11254 = DIRECTION('',(1.,0.,-0.)); +#11255 = DIRECTION('',(0.,0.,1.)); +#11256 = ADVANCED_FACE('',(#11257),#11275,.T.); +#11257 = FACE_BOUND('',#11258,.T.); +#11258 = EDGE_LOOP('',(#11259,#11267,#11268,#11269)); +#11259 = ORIENTED_EDGE('',*,*,#11260,.F.); +#11260 = EDGE_CURVE('',#11238,#11261,#11263,.T.); +#11261 = VERTEX_POINT('',#11262); +#11262 = CARTESIAN_POINT('',(0.25,-11.75,1.5106)); +#11263 = LINE('',#11264,#11265); +#11264 = CARTESIAN_POINT('',(-0.25,-11.75,1.5106)); +#11265 = VECTOR('',#11266,1.); +#11266 = DIRECTION('',(1.,0.,-0.)); +#11267 = ORIENTED_EDGE('',*,*,#11245,.T.); +#11268 = ORIENTED_EDGE('',*,*,#9735,.T.); +#11269 = ORIENTED_EDGE('',*,*,#11270,.F.); +#11270 = EDGE_CURVE('',#11261,#9736,#11271,.T.); +#11271 = LINE('',#11272,#11273); +#11272 = CARTESIAN_POINT('',(0.25,-11.75,1.5106)); +#11273 = VECTOR('',#11274,1.); +#11274 = DIRECTION('',(0.,0.,1.)); +#11275 = PLANE('',#11276); +#11276 = AXIS2_PLACEMENT_3D('',#11277,#11278,#11279); +#11277 = CARTESIAN_POINT('',(-0.25,-11.75,1.5106)); +#11278 = DIRECTION('',(-0.,1.,0.)); +#11279 = DIRECTION('',(0.,0.,1.)); +#11280 = ADVANCED_FACE('',(#11281),#11299,.F.); +#11281 = FACE_BOUND('',#11282,.F.); +#11282 = EDGE_LOOP('',(#11283,#11291,#11292,#11293)); +#11283 = ORIENTED_EDGE('',*,*,#11284,.F.); +#11284 = EDGE_CURVE('',#11230,#11285,#11287,.T.); +#11285 = VERTEX_POINT('',#11286); +#11286 = CARTESIAN_POINT('',(0.25,-12.25,1.5106)); +#11287 = LINE('',#11288,#11289); +#11288 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11289 = VECTOR('',#11290,1.); +#11290 = DIRECTION('',(1.,0.,-0.)); +#11291 = ORIENTED_EDGE('',*,*,#11229,.T.); +#11292 = ORIENTED_EDGE('',*,*,#9751,.T.); +#11293 = ORIENTED_EDGE('',*,*,#11294,.F.); +#11294 = EDGE_CURVE('',#11285,#9744,#11295,.T.); +#11295 = LINE('',#11296,#11297); +#11296 = CARTESIAN_POINT('',(0.25,-12.25,1.5106)); +#11297 = VECTOR('',#11298,1.); +#11298 = DIRECTION('',(0.,0.,1.)); +#11299 = PLANE('',#11300); +#11300 = AXIS2_PLACEMENT_3D('',#11301,#11302,#11303); +#11301 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#11302 = DIRECTION('',(-0.,1.,0.)); +#11303 = DIRECTION('',(0.,0.,1.)); +#11304 = ADVANCED_FACE('',(#11305),#11316,.T.); +#11305 = FACE_BOUND('',#11306,.T.); +#11306 = EDGE_LOOP('',(#11307,#11308,#11314,#11315)); +#11307 = ORIENTED_EDGE('',*,*,#11294,.F.); +#11308 = ORIENTED_EDGE('',*,*,#11309,.T.); +#11309 = EDGE_CURVE('',#11285,#11261,#11310,.T.); +#11310 = LINE('',#11311,#11312); +#11311 = CARTESIAN_POINT('',(0.25,-12.25,1.5106)); +#11312 = VECTOR('',#11313,1.); +#11313 = DIRECTION('',(-0.,1.,0.)); +#11314 = ORIENTED_EDGE('',*,*,#11270,.T.); +#11315 = ORIENTED_EDGE('',*,*,#9743,.F.); +#11316 = PLANE('',#11317); +#11317 = AXIS2_PLACEMENT_3D('',#11318,#11319,#11320); +#11318 = CARTESIAN_POINT('',(0.25,-12.25,1.5106)); +#11319 = DIRECTION('',(1.,0.,-0.)); +#11320 = DIRECTION('',(0.,0.,1.)); +#11321 = ADVANCED_FACE('',(#11322),#11347,.F.); +#11322 = FACE_BOUND('',#11323,.F.); +#11323 = EDGE_LOOP('',(#11324,#11332,#11340,#11346)); +#11324 = ORIENTED_EDGE('',*,*,#11325,.F.); +#11325 = EDGE_CURVE('',#11326,#9760,#11328,.T.); +#11326 = VERTEX_POINT('',#11327); +#11327 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11328 = LINE('',#11329,#11330); +#11329 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11330 = VECTOR('',#11331,1.); +#11331 = DIRECTION('',(0.,0.,1.)); +#11332 = ORIENTED_EDGE('',*,*,#11333,.T.); +#11333 = EDGE_CURVE('',#11326,#11334,#11336,.T.); +#11334 = VERTEX_POINT('',#11335); +#11335 = CARTESIAN_POINT('',(-0.25,-9.75,1.5106)); +#11336 = LINE('',#11337,#11338); +#11337 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11338 = VECTOR('',#11339,1.); +#11339 = DIRECTION('',(-0.,1.,0.)); +#11340 = ORIENTED_EDGE('',*,*,#11341,.T.); +#11341 = EDGE_CURVE('',#11334,#9762,#11342,.T.); +#11342 = LINE('',#11343,#11344); +#11343 = CARTESIAN_POINT('',(-0.25,-9.75,1.5106)); +#11344 = VECTOR('',#11345,1.); +#11345 = DIRECTION('',(0.,0.,1.)); +#11346 = ORIENTED_EDGE('',*,*,#9759,.F.); +#11347 = PLANE('',#11348); +#11348 = AXIS2_PLACEMENT_3D('',#11349,#11350,#11351); +#11349 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11350 = DIRECTION('',(1.,0.,-0.)); +#11351 = DIRECTION('',(0.,0.,1.)); +#11352 = ADVANCED_FACE('',(#11353),#11371,.T.); +#11353 = FACE_BOUND('',#11354,.T.); +#11354 = EDGE_LOOP('',(#11355,#11363,#11364,#11365)); +#11355 = ORIENTED_EDGE('',*,*,#11356,.F.); +#11356 = EDGE_CURVE('',#11334,#11357,#11359,.T.); +#11357 = VERTEX_POINT('',#11358); +#11358 = CARTESIAN_POINT('',(0.25,-9.75,1.5106)); +#11359 = LINE('',#11360,#11361); +#11360 = CARTESIAN_POINT('',(-0.25,-9.75,1.5106)); +#11361 = VECTOR('',#11362,1.); +#11362 = DIRECTION('',(1.,0.,-0.)); +#11363 = ORIENTED_EDGE('',*,*,#11341,.T.); +#11364 = ORIENTED_EDGE('',*,*,#9769,.T.); +#11365 = ORIENTED_EDGE('',*,*,#11366,.F.); +#11366 = EDGE_CURVE('',#11357,#9770,#11367,.T.); +#11367 = LINE('',#11368,#11369); +#11368 = CARTESIAN_POINT('',(0.25,-9.75,1.5106)); +#11369 = VECTOR('',#11370,1.); +#11370 = DIRECTION('',(0.,0.,1.)); +#11371 = PLANE('',#11372); +#11372 = AXIS2_PLACEMENT_3D('',#11373,#11374,#11375); +#11373 = CARTESIAN_POINT('',(-0.25,-9.75,1.5106)); +#11374 = DIRECTION('',(-0.,1.,0.)); +#11375 = DIRECTION('',(0.,0.,1.)); +#11376 = ADVANCED_FACE('',(#11377),#11395,.F.); +#11377 = FACE_BOUND('',#11378,.F.); +#11378 = EDGE_LOOP('',(#11379,#11387,#11388,#11389)); +#11379 = ORIENTED_EDGE('',*,*,#11380,.F.); +#11380 = EDGE_CURVE('',#11326,#11381,#11383,.T.); +#11381 = VERTEX_POINT('',#11382); +#11382 = CARTESIAN_POINT('',(0.25,-10.25,1.5106)); +#11383 = LINE('',#11384,#11385); +#11384 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11385 = VECTOR('',#11386,1.); +#11386 = DIRECTION('',(1.,0.,-0.)); +#11387 = ORIENTED_EDGE('',*,*,#11325,.T.); +#11388 = ORIENTED_EDGE('',*,*,#9785,.T.); +#11389 = ORIENTED_EDGE('',*,*,#11390,.F.); +#11390 = EDGE_CURVE('',#11381,#9778,#11391,.T.); +#11391 = LINE('',#11392,#11393); +#11392 = CARTESIAN_POINT('',(0.25,-10.25,1.5106)); +#11393 = VECTOR('',#11394,1.); +#11394 = DIRECTION('',(0.,0.,1.)); +#11395 = PLANE('',#11396); +#11396 = AXIS2_PLACEMENT_3D('',#11397,#11398,#11399); +#11397 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#11398 = DIRECTION('',(-0.,1.,0.)); +#11399 = DIRECTION('',(0.,0.,1.)); +#11400 = ADVANCED_FACE('',(#11401),#11412,.T.); +#11401 = FACE_BOUND('',#11402,.T.); +#11402 = EDGE_LOOP('',(#11403,#11404,#11410,#11411)); +#11403 = ORIENTED_EDGE('',*,*,#11390,.F.); +#11404 = ORIENTED_EDGE('',*,*,#11405,.T.); +#11405 = EDGE_CURVE('',#11381,#11357,#11406,.T.); +#11406 = LINE('',#11407,#11408); +#11407 = CARTESIAN_POINT('',(0.25,-10.25,1.5106)); +#11408 = VECTOR('',#11409,1.); +#11409 = DIRECTION('',(-0.,1.,0.)); +#11410 = ORIENTED_EDGE('',*,*,#11366,.T.); +#11411 = ORIENTED_EDGE('',*,*,#9777,.F.); +#11412 = PLANE('',#11413); +#11413 = AXIS2_PLACEMENT_3D('',#11414,#11415,#11416); +#11414 = CARTESIAN_POINT('',(0.25,-10.25,1.5106)); +#11415 = DIRECTION('',(1.,0.,-0.)); +#11416 = DIRECTION('',(0.,0.,1.)); +#11417 = ADVANCED_FACE('',(#11418),#11443,.F.); +#11418 = FACE_BOUND('',#11419,.F.); +#11419 = EDGE_LOOP('',(#11420,#11428,#11436,#11442)); +#11420 = ORIENTED_EDGE('',*,*,#11421,.F.); +#11421 = EDGE_CURVE('',#11422,#9794,#11424,.T.); +#11422 = VERTEX_POINT('',#11423); +#11423 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11424 = LINE('',#11425,#11426); +#11425 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11426 = VECTOR('',#11427,1.); +#11427 = DIRECTION('',(0.,0.,1.)); +#11428 = ORIENTED_EDGE('',*,*,#11429,.T.); +#11429 = EDGE_CURVE('',#11422,#11430,#11432,.T.); +#11430 = VERTEX_POINT('',#11431); +#11431 = CARTESIAN_POINT('',(-0.25,-7.75,1.5106)); +#11432 = LINE('',#11433,#11434); +#11433 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11434 = VECTOR('',#11435,1.); +#11435 = DIRECTION('',(-0.,1.,0.)); +#11436 = ORIENTED_EDGE('',*,*,#11437,.T.); +#11437 = EDGE_CURVE('',#11430,#9796,#11438,.T.); +#11438 = LINE('',#11439,#11440); +#11439 = CARTESIAN_POINT('',(-0.25,-7.75,1.5106)); +#11440 = VECTOR('',#11441,1.); +#11441 = DIRECTION('',(0.,0.,1.)); +#11442 = ORIENTED_EDGE('',*,*,#9793,.F.); +#11443 = PLANE('',#11444); +#11444 = AXIS2_PLACEMENT_3D('',#11445,#11446,#11447); +#11445 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11446 = DIRECTION('',(1.,0.,-0.)); +#11447 = DIRECTION('',(0.,0.,1.)); +#11448 = ADVANCED_FACE('',(#11449),#11467,.T.); +#11449 = FACE_BOUND('',#11450,.T.); +#11450 = EDGE_LOOP('',(#11451,#11459,#11460,#11461)); +#11451 = ORIENTED_EDGE('',*,*,#11452,.F.); +#11452 = EDGE_CURVE('',#11430,#11453,#11455,.T.); +#11453 = VERTEX_POINT('',#11454); +#11454 = CARTESIAN_POINT('',(0.25,-7.75,1.5106)); +#11455 = LINE('',#11456,#11457); +#11456 = CARTESIAN_POINT('',(-0.25,-7.75,1.5106)); +#11457 = VECTOR('',#11458,1.); +#11458 = DIRECTION('',(1.,0.,-0.)); +#11459 = ORIENTED_EDGE('',*,*,#11437,.T.); +#11460 = ORIENTED_EDGE('',*,*,#9803,.T.); +#11461 = ORIENTED_EDGE('',*,*,#11462,.F.); +#11462 = EDGE_CURVE('',#11453,#9804,#11463,.T.); +#11463 = LINE('',#11464,#11465); +#11464 = CARTESIAN_POINT('',(0.25,-7.75,1.5106)); +#11465 = VECTOR('',#11466,1.); +#11466 = DIRECTION('',(0.,0.,1.)); +#11467 = PLANE('',#11468); +#11468 = AXIS2_PLACEMENT_3D('',#11469,#11470,#11471); +#11469 = CARTESIAN_POINT('',(-0.25,-7.75,1.5106)); +#11470 = DIRECTION('',(-0.,1.,0.)); +#11471 = DIRECTION('',(0.,0.,1.)); +#11472 = ADVANCED_FACE('',(#11473),#11491,.F.); +#11473 = FACE_BOUND('',#11474,.F.); +#11474 = EDGE_LOOP('',(#11475,#11483,#11484,#11485)); +#11475 = ORIENTED_EDGE('',*,*,#11476,.F.); +#11476 = EDGE_CURVE('',#11422,#11477,#11479,.T.); +#11477 = VERTEX_POINT('',#11478); +#11478 = CARTESIAN_POINT('',(0.25,-8.25,1.5106)); +#11479 = LINE('',#11480,#11481); +#11480 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11481 = VECTOR('',#11482,1.); +#11482 = DIRECTION('',(1.,0.,-0.)); +#11483 = ORIENTED_EDGE('',*,*,#11421,.T.); +#11484 = ORIENTED_EDGE('',*,*,#9819,.T.); +#11485 = ORIENTED_EDGE('',*,*,#11486,.F.); +#11486 = EDGE_CURVE('',#11477,#9812,#11487,.T.); +#11487 = LINE('',#11488,#11489); +#11488 = CARTESIAN_POINT('',(0.25,-8.25,1.5106)); +#11489 = VECTOR('',#11490,1.); +#11490 = DIRECTION('',(0.,0.,1.)); +#11491 = PLANE('',#11492); +#11492 = AXIS2_PLACEMENT_3D('',#11493,#11494,#11495); +#11493 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#11494 = DIRECTION('',(-0.,1.,0.)); +#11495 = DIRECTION('',(0.,0.,1.)); +#11496 = ADVANCED_FACE('',(#11497),#11508,.T.); +#11497 = FACE_BOUND('',#11498,.T.); +#11498 = EDGE_LOOP('',(#11499,#11500,#11506,#11507)); +#11499 = ORIENTED_EDGE('',*,*,#11486,.F.); +#11500 = ORIENTED_EDGE('',*,*,#11501,.T.); +#11501 = EDGE_CURVE('',#11477,#11453,#11502,.T.); +#11502 = LINE('',#11503,#11504); +#11503 = CARTESIAN_POINT('',(0.25,-8.25,1.5106)); +#11504 = VECTOR('',#11505,1.); +#11505 = DIRECTION('',(-0.,1.,0.)); +#11506 = ORIENTED_EDGE('',*,*,#11462,.T.); +#11507 = ORIENTED_EDGE('',*,*,#9811,.F.); +#11508 = PLANE('',#11509); +#11509 = AXIS2_PLACEMENT_3D('',#11510,#11511,#11512); +#11510 = CARTESIAN_POINT('',(0.25,-8.25,1.5106)); +#11511 = DIRECTION('',(1.,0.,-0.)); +#11512 = DIRECTION('',(0.,0.,1.)); +#11513 = ADVANCED_FACE('',(#11514),#11539,.F.); +#11514 = FACE_BOUND('',#11515,.F.); +#11515 = EDGE_LOOP('',(#11516,#11524,#11532,#11538)); +#11516 = ORIENTED_EDGE('',*,*,#11517,.F.); +#11517 = EDGE_CURVE('',#11518,#9828,#11520,.T.); +#11518 = VERTEX_POINT('',#11519); +#11519 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11520 = LINE('',#11521,#11522); +#11521 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11522 = VECTOR('',#11523,1.); +#11523 = DIRECTION('',(0.,0.,1.)); +#11524 = ORIENTED_EDGE('',*,*,#11525,.T.); +#11525 = EDGE_CURVE('',#11518,#11526,#11528,.T.); +#11526 = VERTEX_POINT('',#11527); +#11527 = CARTESIAN_POINT('',(-0.25,-5.75,1.5106)); +#11528 = LINE('',#11529,#11530); +#11529 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11530 = VECTOR('',#11531,1.); +#11531 = DIRECTION('',(-0.,1.,0.)); +#11532 = ORIENTED_EDGE('',*,*,#11533,.T.); +#11533 = EDGE_CURVE('',#11526,#9830,#11534,.T.); +#11534 = LINE('',#11535,#11536); +#11535 = CARTESIAN_POINT('',(-0.25,-5.75,1.5106)); +#11536 = VECTOR('',#11537,1.); +#11537 = DIRECTION('',(0.,0.,1.)); +#11538 = ORIENTED_EDGE('',*,*,#9827,.F.); +#11539 = PLANE('',#11540); +#11540 = AXIS2_PLACEMENT_3D('',#11541,#11542,#11543); +#11541 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11542 = DIRECTION('',(1.,0.,-0.)); +#11543 = DIRECTION('',(0.,0.,1.)); +#11544 = ADVANCED_FACE('',(#11545),#11563,.T.); +#11545 = FACE_BOUND('',#11546,.T.); +#11546 = EDGE_LOOP('',(#11547,#11555,#11556,#11557)); +#11547 = ORIENTED_EDGE('',*,*,#11548,.F.); +#11548 = EDGE_CURVE('',#11526,#11549,#11551,.T.); +#11549 = VERTEX_POINT('',#11550); +#11550 = CARTESIAN_POINT('',(0.25,-5.75,1.5106)); +#11551 = LINE('',#11552,#11553); +#11552 = CARTESIAN_POINT('',(-0.25,-5.75,1.5106)); +#11553 = VECTOR('',#11554,1.); +#11554 = DIRECTION('',(1.,0.,-0.)); +#11555 = ORIENTED_EDGE('',*,*,#11533,.T.); +#11556 = ORIENTED_EDGE('',*,*,#9837,.T.); +#11557 = ORIENTED_EDGE('',*,*,#11558,.F.); +#11558 = EDGE_CURVE('',#11549,#9838,#11559,.T.); +#11559 = LINE('',#11560,#11561); +#11560 = CARTESIAN_POINT('',(0.25,-5.75,1.5106)); +#11561 = VECTOR('',#11562,1.); +#11562 = DIRECTION('',(0.,0.,1.)); +#11563 = PLANE('',#11564); +#11564 = AXIS2_PLACEMENT_3D('',#11565,#11566,#11567); +#11565 = CARTESIAN_POINT('',(-0.25,-5.75,1.5106)); +#11566 = DIRECTION('',(-0.,1.,0.)); +#11567 = DIRECTION('',(0.,0.,1.)); +#11568 = ADVANCED_FACE('',(#11569),#11587,.F.); +#11569 = FACE_BOUND('',#11570,.F.); +#11570 = EDGE_LOOP('',(#11571,#11579,#11580,#11581)); +#11571 = ORIENTED_EDGE('',*,*,#11572,.F.); +#11572 = EDGE_CURVE('',#11518,#11573,#11575,.T.); +#11573 = VERTEX_POINT('',#11574); +#11574 = CARTESIAN_POINT('',(0.25,-6.25,1.5106)); +#11575 = LINE('',#11576,#11577); +#11576 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11577 = VECTOR('',#11578,1.); +#11578 = DIRECTION('',(1.,0.,-0.)); +#11579 = ORIENTED_EDGE('',*,*,#11517,.T.); +#11580 = ORIENTED_EDGE('',*,*,#9853,.T.); +#11581 = ORIENTED_EDGE('',*,*,#11582,.F.); +#11582 = EDGE_CURVE('',#11573,#9846,#11583,.T.); +#11583 = LINE('',#11584,#11585); +#11584 = CARTESIAN_POINT('',(0.25,-6.25,1.5106)); +#11585 = VECTOR('',#11586,1.); +#11586 = DIRECTION('',(0.,0.,1.)); +#11587 = PLANE('',#11588); +#11588 = AXIS2_PLACEMENT_3D('',#11589,#11590,#11591); +#11589 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#11590 = DIRECTION('',(-0.,1.,0.)); +#11591 = DIRECTION('',(0.,0.,1.)); +#11592 = ADVANCED_FACE('',(#11593),#11604,.T.); +#11593 = FACE_BOUND('',#11594,.T.); +#11594 = EDGE_LOOP('',(#11595,#11596,#11602,#11603)); +#11595 = ORIENTED_EDGE('',*,*,#11582,.F.); +#11596 = ORIENTED_EDGE('',*,*,#11597,.T.); +#11597 = EDGE_CURVE('',#11573,#11549,#11598,.T.); +#11598 = LINE('',#11599,#11600); +#11599 = CARTESIAN_POINT('',(0.25,-6.25,1.5106)); +#11600 = VECTOR('',#11601,1.); +#11601 = DIRECTION('',(-0.,1.,0.)); +#11602 = ORIENTED_EDGE('',*,*,#11558,.T.); +#11603 = ORIENTED_EDGE('',*,*,#9845,.F.); +#11604 = PLANE('',#11605); +#11605 = AXIS2_PLACEMENT_3D('',#11606,#11607,#11608); +#11606 = CARTESIAN_POINT('',(0.25,-6.25,1.5106)); +#11607 = DIRECTION('',(1.,0.,-0.)); +#11608 = DIRECTION('',(0.,0.,1.)); +#11609 = ADVANCED_FACE('',(#11610),#11635,.F.); +#11610 = FACE_BOUND('',#11611,.F.); +#11611 = EDGE_LOOP('',(#11612,#11620,#11628,#11634)); +#11612 = ORIENTED_EDGE('',*,*,#11613,.F.); +#11613 = EDGE_CURVE('',#11614,#9862,#11616,.T.); +#11614 = VERTEX_POINT('',#11615); +#11615 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11616 = LINE('',#11617,#11618); +#11617 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11618 = VECTOR('',#11619,1.); +#11619 = DIRECTION('',(0.,0.,1.)); +#11620 = ORIENTED_EDGE('',*,*,#11621,.T.); +#11621 = EDGE_CURVE('',#11614,#11622,#11624,.T.); +#11622 = VERTEX_POINT('',#11623); +#11623 = CARTESIAN_POINT('',(-0.25,-3.75,1.5106)); +#11624 = LINE('',#11625,#11626); +#11625 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11626 = VECTOR('',#11627,1.); +#11627 = DIRECTION('',(-0.,1.,0.)); +#11628 = ORIENTED_EDGE('',*,*,#11629,.T.); +#11629 = EDGE_CURVE('',#11622,#9864,#11630,.T.); +#11630 = LINE('',#11631,#11632); +#11631 = CARTESIAN_POINT('',(-0.25,-3.75,1.5106)); +#11632 = VECTOR('',#11633,1.); +#11633 = DIRECTION('',(0.,0.,1.)); +#11634 = ORIENTED_EDGE('',*,*,#9861,.F.); +#11635 = PLANE('',#11636); +#11636 = AXIS2_PLACEMENT_3D('',#11637,#11638,#11639); +#11637 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11638 = DIRECTION('',(1.,0.,-0.)); +#11639 = DIRECTION('',(0.,0.,1.)); +#11640 = ADVANCED_FACE('',(#11641),#11659,.T.); +#11641 = FACE_BOUND('',#11642,.T.); +#11642 = EDGE_LOOP('',(#11643,#11651,#11652,#11653)); +#11643 = ORIENTED_EDGE('',*,*,#11644,.F.); +#11644 = EDGE_CURVE('',#11622,#11645,#11647,.T.); +#11645 = VERTEX_POINT('',#11646); +#11646 = CARTESIAN_POINT('',(0.25,-3.75,1.5106)); +#11647 = LINE('',#11648,#11649); +#11648 = CARTESIAN_POINT('',(-0.25,-3.75,1.5106)); +#11649 = VECTOR('',#11650,1.); +#11650 = DIRECTION('',(1.,0.,-0.)); +#11651 = ORIENTED_EDGE('',*,*,#11629,.T.); +#11652 = ORIENTED_EDGE('',*,*,#9871,.T.); +#11653 = ORIENTED_EDGE('',*,*,#11654,.F.); +#11654 = EDGE_CURVE('',#11645,#9872,#11655,.T.); +#11655 = LINE('',#11656,#11657); +#11656 = CARTESIAN_POINT('',(0.25,-3.75,1.5106)); +#11657 = VECTOR('',#11658,1.); +#11658 = DIRECTION('',(0.,0.,1.)); +#11659 = PLANE('',#11660); +#11660 = AXIS2_PLACEMENT_3D('',#11661,#11662,#11663); +#11661 = CARTESIAN_POINT('',(-0.25,-3.75,1.5106)); +#11662 = DIRECTION('',(-0.,1.,0.)); +#11663 = DIRECTION('',(0.,0.,1.)); +#11664 = ADVANCED_FACE('',(#11665),#11683,.F.); +#11665 = FACE_BOUND('',#11666,.F.); +#11666 = EDGE_LOOP('',(#11667,#11675,#11676,#11677)); +#11667 = ORIENTED_EDGE('',*,*,#11668,.F.); +#11668 = EDGE_CURVE('',#11614,#11669,#11671,.T.); +#11669 = VERTEX_POINT('',#11670); +#11670 = CARTESIAN_POINT('',(0.25,-4.25,1.5106)); +#11671 = LINE('',#11672,#11673); +#11672 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11673 = VECTOR('',#11674,1.); +#11674 = DIRECTION('',(1.,0.,-0.)); +#11675 = ORIENTED_EDGE('',*,*,#11613,.T.); +#11676 = ORIENTED_EDGE('',*,*,#9887,.T.); +#11677 = ORIENTED_EDGE('',*,*,#11678,.F.); +#11678 = EDGE_CURVE('',#11669,#9880,#11679,.T.); +#11679 = LINE('',#11680,#11681); +#11680 = CARTESIAN_POINT('',(0.25,-4.25,1.5106)); +#11681 = VECTOR('',#11682,1.); +#11682 = DIRECTION('',(0.,0.,1.)); +#11683 = PLANE('',#11684); +#11684 = AXIS2_PLACEMENT_3D('',#11685,#11686,#11687); +#11685 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#11686 = DIRECTION('',(-0.,1.,0.)); +#11687 = DIRECTION('',(0.,0.,1.)); +#11688 = ADVANCED_FACE('',(#11689),#11700,.T.); +#11689 = FACE_BOUND('',#11690,.T.); +#11690 = EDGE_LOOP('',(#11691,#11692,#11698,#11699)); +#11691 = ORIENTED_EDGE('',*,*,#11678,.F.); +#11692 = ORIENTED_EDGE('',*,*,#11693,.T.); +#11693 = EDGE_CURVE('',#11669,#11645,#11694,.T.); +#11694 = LINE('',#11695,#11696); +#11695 = CARTESIAN_POINT('',(0.25,-4.25,1.5106)); +#11696 = VECTOR('',#11697,1.); +#11697 = DIRECTION('',(-0.,1.,0.)); +#11698 = ORIENTED_EDGE('',*,*,#11654,.T.); +#11699 = ORIENTED_EDGE('',*,*,#9879,.F.); +#11700 = PLANE('',#11701); +#11701 = AXIS2_PLACEMENT_3D('',#11702,#11703,#11704); +#11702 = CARTESIAN_POINT('',(0.25,-4.25,1.5106)); +#11703 = DIRECTION('',(1.,0.,-0.)); +#11704 = DIRECTION('',(0.,0.,1.)); +#11705 = ADVANCED_FACE('',(#11706),#11731,.F.); +#11706 = FACE_BOUND('',#11707,.F.); +#11707 = EDGE_LOOP('',(#11708,#11716,#11724,#11730)); +#11708 = ORIENTED_EDGE('',*,*,#11709,.F.); +#11709 = EDGE_CURVE('',#11710,#9896,#11712,.T.); +#11710 = VERTEX_POINT('',#11711); +#11711 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11712 = LINE('',#11713,#11714); +#11713 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11714 = VECTOR('',#11715,1.); +#11715 = DIRECTION('',(0.,0.,1.)); +#11716 = ORIENTED_EDGE('',*,*,#11717,.T.); +#11717 = EDGE_CURVE('',#11710,#11718,#11720,.T.); +#11718 = VERTEX_POINT('',#11719); +#11719 = CARTESIAN_POINT('',(-0.25,-1.75,1.5106)); +#11720 = LINE('',#11721,#11722); +#11721 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11722 = VECTOR('',#11723,1.); +#11723 = DIRECTION('',(-0.,1.,0.)); +#11724 = ORIENTED_EDGE('',*,*,#11725,.T.); +#11725 = EDGE_CURVE('',#11718,#9898,#11726,.T.); +#11726 = LINE('',#11727,#11728); +#11727 = CARTESIAN_POINT('',(-0.25,-1.75,1.5106)); +#11728 = VECTOR('',#11729,1.); +#11729 = DIRECTION('',(0.,0.,1.)); +#11730 = ORIENTED_EDGE('',*,*,#9895,.F.); +#11731 = PLANE('',#11732); +#11732 = AXIS2_PLACEMENT_3D('',#11733,#11734,#11735); +#11733 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11734 = DIRECTION('',(1.,0.,-0.)); +#11735 = DIRECTION('',(0.,0.,1.)); +#11736 = ADVANCED_FACE('',(#11737),#11755,.T.); +#11737 = FACE_BOUND('',#11738,.T.); +#11738 = EDGE_LOOP('',(#11739,#11747,#11748,#11749)); +#11739 = ORIENTED_EDGE('',*,*,#11740,.F.); +#11740 = EDGE_CURVE('',#11718,#11741,#11743,.T.); +#11741 = VERTEX_POINT('',#11742); +#11742 = CARTESIAN_POINT('',(0.25,-1.75,1.5106)); +#11743 = LINE('',#11744,#11745); +#11744 = CARTESIAN_POINT('',(-0.25,-1.75,1.5106)); +#11745 = VECTOR('',#11746,1.); +#11746 = DIRECTION('',(1.,0.,-0.)); +#11747 = ORIENTED_EDGE('',*,*,#11725,.T.); +#11748 = ORIENTED_EDGE('',*,*,#9905,.T.); +#11749 = ORIENTED_EDGE('',*,*,#11750,.F.); +#11750 = EDGE_CURVE('',#11741,#9906,#11751,.T.); +#11751 = LINE('',#11752,#11753); +#11752 = CARTESIAN_POINT('',(0.25,-1.75,1.5106)); +#11753 = VECTOR('',#11754,1.); +#11754 = DIRECTION('',(0.,0.,1.)); +#11755 = PLANE('',#11756); +#11756 = AXIS2_PLACEMENT_3D('',#11757,#11758,#11759); +#11757 = CARTESIAN_POINT('',(-0.25,-1.75,1.5106)); +#11758 = DIRECTION('',(-0.,1.,0.)); +#11759 = DIRECTION('',(0.,0.,1.)); +#11760 = ADVANCED_FACE('',(#11761),#11779,.F.); +#11761 = FACE_BOUND('',#11762,.F.); +#11762 = EDGE_LOOP('',(#11763,#11771,#11772,#11773)); +#11763 = ORIENTED_EDGE('',*,*,#11764,.F.); +#11764 = EDGE_CURVE('',#11710,#11765,#11767,.T.); +#11765 = VERTEX_POINT('',#11766); +#11766 = CARTESIAN_POINT('',(0.25,-2.25,1.5106)); +#11767 = LINE('',#11768,#11769); +#11768 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11769 = VECTOR('',#11770,1.); +#11770 = DIRECTION('',(1.,0.,-0.)); +#11771 = ORIENTED_EDGE('',*,*,#11709,.T.); +#11772 = ORIENTED_EDGE('',*,*,#9921,.T.); +#11773 = ORIENTED_EDGE('',*,*,#11774,.F.); +#11774 = EDGE_CURVE('',#11765,#9914,#11775,.T.); +#11775 = LINE('',#11776,#11777); +#11776 = CARTESIAN_POINT('',(0.25,-2.25,1.5106)); +#11777 = VECTOR('',#11778,1.); +#11778 = DIRECTION('',(0.,0.,1.)); +#11779 = PLANE('',#11780); +#11780 = AXIS2_PLACEMENT_3D('',#11781,#11782,#11783); +#11781 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#11782 = DIRECTION('',(-0.,1.,0.)); +#11783 = DIRECTION('',(0.,0.,1.)); +#11784 = ADVANCED_FACE('',(#11785),#11796,.T.); +#11785 = FACE_BOUND('',#11786,.T.); +#11786 = EDGE_LOOP('',(#11787,#11788,#11794,#11795)); +#11787 = ORIENTED_EDGE('',*,*,#11774,.F.); +#11788 = ORIENTED_EDGE('',*,*,#11789,.T.); +#11789 = EDGE_CURVE('',#11765,#11741,#11790,.T.); +#11790 = LINE('',#11791,#11792); +#11791 = CARTESIAN_POINT('',(0.25,-2.25,1.5106)); +#11792 = VECTOR('',#11793,1.); +#11793 = DIRECTION('',(-0.,1.,0.)); +#11794 = ORIENTED_EDGE('',*,*,#11750,.T.); +#11795 = ORIENTED_EDGE('',*,*,#9913,.F.); +#11796 = PLANE('',#11797); +#11797 = AXIS2_PLACEMENT_3D('',#11798,#11799,#11800); +#11798 = CARTESIAN_POINT('',(0.25,-2.25,1.5106)); +#11799 = DIRECTION('',(1.,0.,-0.)); +#11800 = DIRECTION('',(0.,0.,1.)); +#11801 = ADVANCED_FACE('',(#11802),#11827,.F.); +#11802 = FACE_BOUND('',#11803,.F.); +#11803 = EDGE_LOOP('',(#11804,#11812,#11820,#11826)); +#11804 = ORIENTED_EDGE('',*,*,#11805,.F.); +#11805 = EDGE_CURVE('',#11806,#9930,#11808,.T.); +#11806 = VERTEX_POINT('',#11807); +#11807 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11808 = LINE('',#11809,#11810); +#11809 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11810 = VECTOR('',#11811,1.); +#11811 = DIRECTION('',(0.,0.,1.)); +#11812 = ORIENTED_EDGE('',*,*,#11813,.T.); +#11813 = EDGE_CURVE('',#11806,#11814,#11816,.T.); +#11814 = VERTEX_POINT('',#11815); +#11815 = CARTESIAN_POINT('',(-0.25,0.25,1.5106)); +#11816 = LINE('',#11817,#11818); +#11817 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11818 = VECTOR('',#11819,1.); +#11819 = DIRECTION('',(-0.,1.,0.)); +#11820 = ORIENTED_EDGE('',*,*,#11821,.T.); +#11821 = EDGE_CURVE('',#11814,#9932,#11822,.T.); +#11822 = LINE('',#11823,#11824); +#11823 = CARTESIAN_POINT('',(-0.25,0.25,1.5106)); +#11824 = VECTOR('',#11825,1.); +#11825 = DIRECTION('',(0.,0.,1.)); +#11826 = ORIENTED_EDGE('',*,*,#9929,.F.); +#11827 = PLANE('',#11828); +#11828 = AXIS2_PLACEMENT_3D('',#11829,#11830,#11831); +#11829 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11830 = DIRECTION('',(1.,0.,-0.)); +#11831 = DIRECTION('',(0.,0.,1.)); +#11832 = ADVANCED_FACE('',(#11833),#11851,.T.); +#11833 = FACE_BOUND('',#11834,.T.); +#11834 = EDGE_LOOP('',(#11835,#11843,#11844,#11845)); +#11835 = ORIENTED_EDGE('',*,*,#11836,.F.); +#11836 = EDGE_CURVE('',#11814,#11837,#11839,.T.); +#11837 = VERTEX_POINT('',#11838); +#11838 = CARTESIAN_POINT('',(0.25,0.25,1.5106)); +#11839 = LINE('',#11840,#11841); +#11840 = CARTESIAN_POINT('',(-0.25,0.25,1.5106)); +#11841 = VECTOR('',#11842,1.); +#11842 = DIRECTION('',(1.,0.,-0.)); +#11843 = ORIENTED_EDGE('',*,*,#11821,.T.); +#11844 = ORIENTED_EDGE('',*,*,#9939,.T.); +#11845 = ORIENTED_EDGE('',*,*,#11846,.F.); +#11846 = EDGE_CURVE('',#11837,#9940,#11847,.T.); +#11847 = LINE('',#11848,#11849); +#11848 = CARTESIAN_POINT('',(0.25,0.25,1.5106)); +#11849 = VECTOR('',#11850,1.); +#11850 = DIRECTION('',(0.,0.,1.)); +#11851 = PLANE('',#11852); +#11852 = AXIS2_PLACEMENT_3D('',#11853,#11854,#11855); +#11853 = CARTESIAN_POINT('',(-0.25,0.25,1.5106)); +#11854 = DIRECTION('',(-0.,1.,0.)); +#11855 = DIRECTION('',(0.,0.,1.)); +#11856 = ADVANCED_FACE('',(#11857),#11875,.F.); +#11857 = FACE_BOUND('',#11858,.F.); +#11858 = EDGE_LOOP('',(#11859,#11867,#11868,#11869)); +#11859 = ORIENTED_EDGE('',*,*,#11860,.F.); +#11860 = EDGE_CURVE('',#11806,#11861,#11863,.T.); +#11861 = VERTEX_POINT('',#11862); +#11862 = CARTESIAN_POINT('',(0.25,-0.25,1.5106)); +#11863 = LINE('',#11864,#11865); +#11864 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11865 = VECTOR('',#11866,1.); +#11866 = DIRECTION('',(1.,0.,-0.)); +#11867 = ORIENTED_EDGE('',*,*,#11805,.T.); +#11868 = ORIENTED_EDGE('',*,*,#9955,.T.); +#11869 = ORIENTED_EDGE('',*,*,#11870,.F.); +#11870 = EDGE_CURVE('',#11861,#9948,#11871,.T.); +#11871 = LINE('',#11872,#11873); +#11872 = CARTESIAN_POINT('',(0.25,-0.25,1.5106)); +#11873 = VECTOR('',#11874,1.); +#11874 = DIRECTION('',(0.,0.,1.)); +#11875 = PLANE('',#11876); +#11876 = AXIS2_PLACEMENT_3D('',#11877,#11878,#11879); +#11877 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#11878 = DIRECTION('',(-0.,1.,0.)); +#11879 = DIRECTION('',(0.,0.,1.)); +#11880 = ADVANCED_FACE('',(#11881),#11892,.T.); +#11881 = FACE_BOUND('',#11882,.T.); +#11882 = EDGE_LOOP('',(#11883,#11884,#11890,#11891)); +#11883 = ORIENTED_EDGE('',*,*,#11870,.F.); +#11884 = ORIENTED_EDGE('',*,*,#11885,.T.); +#11885 = EDGE_CURVE('',#11861,#11837,#11886,.T.); +#11886 = LINE('',#11887,#11888); +#11887 = CARTESIAN_POINT('',(0.25,-0.25,1.5106)); +#11888 = VECTOR('',#11889,1.); +#11889 = DIRECTION('',(-0.,1.,0.)); +#11890 = ORIENTED_EDGE('',*,*,#11846,.T.); +#11891 = ORIENTED_EDGE('',*,*,#9947,.F.); +#11892 = PLANE('',#11893); +#11893 = AXIS2_PLACEMENT_3D('',#11894,#11895,#11896); +#11894 = CARTESIAN_POINT('',(0.25,-0.25,1.5106)); +#11895 = DIRECTION('',(1.,0.,-0.)); +#11896 = DIRECTION('',(0.,0.,1.)); +#11897 = ADVANCED_FACE('',(#11898),#11904,.F.); +#11898 = FACE_BOUND('',#11899,.F.); +#11899 = EDGE_LOOP('',(#11900,#11901,#11902,#11903)); +#11900 = ORIENTED_EDGE('',*,*,#9989,.F.); +#11901 = ORIENTED_EDGE('',*,*,#10012,.T.); +#11902 = ORIENTED_EDGE('',*,*,#10037,.T.); +#11903 = ORIENTED_EDGE('',*,*,#10060,.F.); +#11904 = PLANE('',#11905); +#11905 = AXIS2_PLACEMENT_3D('',#11906,#11907,#11908); +#11906 = CARTESIAN_POINT('',(21.75,-18.25,1.5106)); +#11907 = DIRECTION('',(0.,0.,1.)); +#11908 = DIRECTION('',(1.,0.,-0.)); +#11909 = ADVANCED_FACE('',(#11910),#11916,.F.); +#11910 = FACE_BOUND('',#11911,.F.); +#11911 = EDGE_LOOP('',(#11912,#11913,#11914,#11915)); +#11912 = ORIENTED_EDGE('',*,*,#10085,.F.); +#11913 = ORIENTED_EDGE('',*,*,#10132,.T.); +#11914 = ORIENTED_EDGE('',*,*,#10157,.T.); +#11915 = ORIENTED_EDGE('',*,*,#10108,.F.); +#11916 = PLANE('',#11917); +#11917 = AXIS2_PLACEMENT_3D('',#11918,#11919,#11920); +#11918 = CARTESIAN_POINT('',(21.75,-16.25,1.5106)); +#11919 = DIRECTION('',(0.,0.,1.)); +#11920 = DIRECTION('',(1.,0.,-0.)); +#11921 = ADVANCED_FACE('',(#11922),#11928,.F.); +#11922 = FACE_BOUND('',#11923,.F.); +#11923 = EDGE_LOOP('',(#11924,#11925,#11926,#11927)); +#11924 = ORIENTED_EDGE('',*,*,#10181,.F.); +#11925 = ORIENTED_EDGE('',*,*,#10228,.T.); +#11926 = ORIENTED_EDGE('',*,*,#10253,.T.); +#11927 = ORIENTED_EDGE('',*,*,#10204,.F.); +#11928 = PLANE('',#11929); +#11929 = AXIS2_PLACEMENT_3D('',#11930,#11931,#11932); +#11930 = CARTESIAN_POINT('',(21.75,-14.25,1.5106)); +#11931 = DIRECTION('',(0.,0.,1.)); +#11932 = DIRECTION('',(1.,0.,-0.)); +#11933 = ADVANCED_FACE('',(#11934),#11940,.F.); +#11934 = FACE_BOUND('',#11935,.F.); +#11935 = EDGE_LOOP('',(#11936,#11937,#11938,#11939)); +#11936 = ORIENTED_EDGE('',*,*,#10277,.F.); +#11937 = ORIENTED_EDGE('',*,*,#10324,.T.); +#11938 = ORIENTED_EDGE('',*,*,#10349,.T.); +#11939 = ORIENTED_EDGE('',*,*,#10300,.F.); +#11940 = PLANE('',#11941); +#11941 = AXIS2_PLACEMENT_3D('',#11942,#11943,#11944); +#11942 = CARTESIAN_POINT('',(21.75,-12.25,1.5106)); +#11943 = DIRECTION('',(0.,0.,1.)); +#11944 = DIRECTION('',(1.,0.,-0.)); +#11945 = ADVANCED_FACE('',(#11946),#11952,.F.); +#11946 = FACE_BOUND('',#11947,.F.); +#11947 = EDGE_LOOP('',(#11948,#11949,#11950,#11951)); +#11948 = ORIENTED_EDGE('',*,*,#10373,.F.); +#11949 = ORIENTED_EDGE('',*,*,#10420,.T.); +#11950 = ORIENTED_EDGE('',*,*,#10445,.T.); +#11951 = ORIENTED_EDGE('',*,*,#10396,.F.); +#11952 = PLANE('',#11953); +#11953 = AXIS2_PLACEMENT_3D('',#11954,#11955,#11956); +#11954 = CARTESIAN_POINT('',(21.75,-10.25,1.5106)); +#11955 = DIRECTION('',(0.,0.,1.)); +#11956 = DIRECTION('',(1.,0.,-0.)); +#11957 = ADVANCED_FACE('',(#11958),#11964,.F.); +#11958 = FACE_BOUND('',#11959,.F.); +#11959 = EDGE_LOOP('',(#11960,#11961,#11962,#11963)); +#11960 = ORIENTED_EDGE('',*,*,#10469,.F.); +#11961 = ORIENTED_EDGE('',*,*,#10516,.T.); +#11962 = ORIENTED_EDGE('',*,*,#10541,.T.); +#11963 = ORIENTED_EDGE('',*,*,#10492,.F.); +#11964 = PLANE('',#11965); +#11965 = AXIS2_PLACEMENT_3D('',#11966,#11967,#11968); +#11966 = CARTESIAN_POINT('',(21.75,-8.25,1.5106)); +#11967 = DIRECTION('',(0.,0.,1.)); +#11968 = DIRECTION('',(1.,0.,-0.)); +#11969 = ADVANCED_FACE('',(#11970),#11976,.F.); +#11970 = FACE_BOUND('',#11971,.F.); +#11971 = EDGE_LOOP('',(#11972,#11973,#11974,#11975)); +#11972 = ORIENTED_EDGE('',*,*,#10565,.F.); +#11973 = ORIENTED_EDGE('',*,*,#10612,.T.); +#11974 = ORIENTED_EDGE('',*,*,#10637,.T.); +#11975 = ORIENTED_EDGE('',*,*,#10588,.F.); +#11976 = PLANE('',#11977); +#11977 = AXIS2_PLACEMENT_3D('',#11978,#11979,#11980); +#11978 = CARTESIAN_POINT('',(21.75,-6.25,1.5106)); +#11979 = DIRECTION('',(0.,0.,1.)); +#11980 = DIRECTION('',(1.,0.,-0.)); +#11981 = ADVANCED_FACE('',(#11982),#11988,.F.); +#11982 = FACE_BOUND('',#11983,.F.); +#11983 = EDGE_LOOP('',(#11984,#11985,#11986,#11987)); +#11984 = ORIENTED_EDGE('',*,*,#10661,.F.); +#11985 = ORIENTED_EDGE('',*,*,#10708,.T.); +#11986 = ORIENTED_EDGE('',*,*,#10733,.T.); +#11987 = ORIENTED_EDGE('',*,*,#10684,.F.); +#11988 = PLANE('',#11989); +#11989 = AXIS2_PLACEMENT_3D('',#11990,#11991,#11992); +#11990 = CARTESIAN_POINT('',(21.75,-4.25,1.5106)); +#11991 = DIRECTION('',(0.,0.,1.)); +#11992 = DIRECTION('',(1.,0.,-0.)); +#11993 = ADVANCED_FACE('',(#11994),#12000,.F.); +#11994 = FACE_BOUND('',#11995,.F.); +#11995 = EDGE_LOOP('',(#11996,#11997,#11998,#11999)); +#11996 = ORIENTED_EDGE('',*,*,#10757,.F.); +#11997 = ORIENTED_EDGE('',*,*,#10804,.T.); +#11998 = ORIENTED_EDGE('',*,*,#10829,.T.); +#11999 = ORIENTED_EDGE('',*,*,#10780,.F.); +#12000 = PLANE('',#12001); +#12001 = AXIS2_PLACEMENT_3D('',#12002,#12003,#12004); +#12002 = CARTESIAN_POINT('',(21.75,-2.25,1.5106)); +#12003 = DIRECTION('',(0.,0.,1.)); +#12004 = DIRECTION('',(1.,0.,-0.)); +#12005 = ADVANCED_FACE('',(#12006),#12012,.F.); +#12006 = FACE_BOUND('',#12007,.F.); +#12007 = EDGE_LOOP('',(#12008,#12009,#12010,#12011)); +#12008 = ORIENTED_EDGE('',*,*,#10853,.F.); +#12009 = ORIENTED_EDGE('',*,*,#10900,.T.); +#12010 = ORIENTED_EDGE('',*,*,#10925,.T.); +#12011 = ORIENTED_EDGE('',*,*,#10876,.F.); +#12012 = PLANE('',#12013); +#12013 = AXIS2_PLACEMENT_3D('',#12014,#12015,#12016); +#12014 = CARTESIAN_POINT('',(21.75,-0.25,1.5106)); +#12015 = DIRECTION('',(0.,0.,1.)); +#12016 = DIRECTION('',(1.,0.,-0.)); +#12017 = ADVANCED_FACE('',(#12018),#12024,.F.); +#12018 = FACE_BOUND('',#12019,.F.); +#12019 = EDGE_LOOP('',(#12020,#12021,#12022,#12023)); +#12020 = ORIENTED_EDGE('',*,*,#10949,.F.); +#12021 = ORIENTED_EDGE('',*,*,#10972,.T.); +#12022 = ORIENTED_EDGE('',*,*,#10997,.T.); +#12023 = ORIENTED_EDGE('',*,*,#11020,.F.); +#12024 = PLANE('',#12025); +#12025 = AXIS2_PLACEMENT_3D('',#12026,#12027,#12028); +#12026 = CARTESIAN_POINT('',(-0.25,-18.25,1.5106)); +#12027 = DIRECTION('',(0.,0.,1.)); +#12028 = DIRECTION('',(1.,0.,-0.)); +#12029 = ADVANCED_FACE('',(#12030),#12036,.F.); +#12030 = FACE_BOUND('',#12031,.F.); +#12031 = EDGE_LOOP('',(#12032,#12033,#12034,#12035)); +#12032 = ORIENTED_EDGE('',*,*,#11045,.F.); +#12033 = ORIENTED_EDGE('',*,*,#11092,.T.); +#12034 = ORIENTED_EDGE('',*,*,#11117,.T.); +#12035 = ORIENTED_EDGE('',*,*,#11068,.F.); +#12036 = PLANE('',#12037); +#12037 = AXIS2_PLACEMENT_3D('',#12038,#12039,#12040); +#12038 = CARTESIAN_POINT('',(-0.25,-16.25,1.5106)); +#12039 = DIRECTION('',(0.,0.,1.)); +#12040 = DIRECTION('',(1.,0.,-0.)); +#12041 = ADVANCED_FACE('',(#12042),#12048,.F.); +#12042 = FACE_BOUND('',#12043,.F.); +#12043 = EDGE_LOOP('',(#12044,#12045,#12046,#12047)); +#12044 = ORIENTED_EDGE('',*,*,#11141,.F.); +#12045 = ORIENTED_EDGE('',*,*,#11188,.T.); +#12046 = ORIENTED_EDGE('',*,*,#11213,.T.); +#12047 = ORIENTED_EDGE('',*,*,#11164,.F.); +#12048 = PLANE('',#12049); +#12049 = AXIS2_PLACEMENT_3D('',#12050,#12051,#12052); +#12050 = CARTESIAN_POINT('',(-0.25,-14.25,1.5106)); +#12051 = DIRECTION('',(0.,0.,1.)); +#12052 = DIRECTION('',(1.,0.,-0.)); +#12053 = ADVANCED_FACE('',(#12054),#12060,.F.); +#12054 = FACE_BOUND('',#12055,.F.); +#12055 = EDGE_LOOP('',(#12056,#12057,#12058,#12059)); +#12056 = ORIENTED_EDGE('',*,*,#11237,.F.); +#12057 = ORIENTED_EDGE('',*,*,#11284,.T.); +#12058 = ORIENTED_EDGE('',*,*,#11309,.T.); +#12059 = ORIENTED_EDGE('',*,*,#11260,.F.); +#12060 = PLANE('',#12061); +#12061 = AXIS2_PLACEMENT_3D('',#12062,#12063,#12064); +#12062 = CARTESIAN_POINT('',(-0.25,-12.25,1.5106)); +#12063 = DIRECTION('',(0.,0.,1.)); +#12064 = DIRECTION('',(1.,0.,-0.)); +#12065 = ADVANCED_FACE('',(#12066),#12072,.F.); +#12066 = FACE_BOUND('',#12067,.F.); +#12067 = EDGE_LOOP('',(#12068,#12069,#12070,#12071)); +#12068 = ORIENTED_EDGE('',*,*,#11333,.F.); +#12069 = ORIENTED_EDGE('',*,*,#11380,.T.); +#12070 = ORIENTED_EDGE('',*,*,#11405,.T.); +#12071 = ORIENTED_EDGE('',*,*,#11356,.F.); +#12072 = PLANE('',#12073); +#12073 = AXIS2_PLACEMENT_3D('',#12074,#12075,#12076); +#12074 = CARTESIAN_POINT('',(-0.25,-10.25,1.5106)); +#12075 = DIRECTION('',(0.,0.,1.)); +#12076 = DIRECTION('',(1.,0.,-0.)); +#12077 = ADVANCED_FACE('',(#12078),#12084,.F.); +#12078 = FACE_BOUND('',#12079,.F.); +#12079 = EDGE_LOOP('',(#12080,#12081,#12082,#12083)); +#12080 = ORIENTED_EDGE('',*,*,#11429,.F.); +#12081 = ORIENTED_EDGE('',*,*,#11476,.T.); +#12082 = ORIENTED_EDGE('',*,*,#11501,.T.); +#12083 = ORIENTED_EDGE('',*,*,#11452,.F.); +#12084 = PLANE('',#12085); +#12085 = AXIS2_PLACEMENT_3D('',#12086,#12087,#12088); +#12086 = CARTESIAN_POINT('',(-0.25,-8.25,1.5106)); +#12087 = DIRECTION('',(0.,0.,1.)); +#12088 = DIRECTION('',(1.,0.,-0.)); +#12089 = ADVANCED_FACE('',(#12090),#12096,.F.); +#12090 = FACE_BOUND('',#12091,.F.); +#12091 = EDGE_LOOP('',(#12092,#12093,#12094,#12095)); +#12092 = ORIENTED_EDGE('',*,*,#11525,.F.); +#12093 = ORIENTED_EDGE('',*,*,#11572,.T.); +#12094 = ORIENTED_EDGE('',*,*,#11597,.T.); +#12095 = ORIENTED_EDGE('',*,*,#11548,.F.); +#12096 = PLANE('',#12097); +#12097 = AXIS2_PLACEMENT_3D('',#12098,#12099,#12100); +#12098 = CARTESIAN_POINT('',(-0.25,-6.25,1.5106)); +#12099 = DIRECTION('',(0.,0.,1.)); +#12100 = DIRECTION('',(1.,0.,-0.)); +#12101 = ADVANCED_FACE('',(#12102),#12108,.F.); +#12102 = FACE_BOUND('',#12103,.F.); +#12103 = EDGE_LOOP('',(#12104,#12105,#12106,#12107)); +#12104 = ORIENTED_EDGE('',*,*,#11621,.F.); +#12105 = ORIENTED_EDGE('',*,*,#11668,.T.); +#12106 = ORIENTED_EDGE('',*,*,#11693,.T.); +#12107 = ORIENTED_EDGE('',*,*,#11644,.F.); +#12108 = PLANE('',#12109); +#12109 = AXIS2_PLACEMENT_3D('',#12110,#12111,#12112); +#12110 = CARTESIAN_POINT('',(-0.25,-4.25,1.5106)); +#12111 = DIRECTION('',(0.,0.,1.)); +#12112 = DIRECTION('',(1.,0.,-0.)); +#12113 = ADVANCED_FACE('',(#12114),#12120,.F.); +#12114 = FACE_BOUND('',#12115,.F.); +#12115 = EDGE_LOOP('',(#12116,#12117,#12118,#12119)); +#12116 = ORIENTED_EDGE('',*,*,#11717,.F.); +#12117 = ORIENTED_EDGE('',*,*,#11764,.T.); +#12118 = ORIENTED_EDGE('',*,*,#11789,.T.); +#12119 = ORIENTED_EDGE('',*,*,#11740,.F.); +#12120 = PLANE('',#12121); +#12121 = AXIS2_PLACEMENT_3D('',#12122,#12123,#12124); +#12122 = CARTESIAN_POINT('',(-0.25,-2.25,1.5106)); +#12123 = DIRECTION('',(0.,0.,1.)); +#12124 = DIRECTION('',(1.,0.,-0.)); +#12125 = ADVANCED_FACE('',(#12126),#12132,.F.); +#12126 = FACE_BOUND('',#12127,.F.); +#12127 = EDGE_LOOP('',(#12128,#12129,#12130,#12131)); +#12128 = ORIENTED_EDGE('',*,*,#11813,.F.); +#12129 = ORIENTED_EDGE('',*,*,#11860,.T.); +#12130 = ORIENTED_EDGE('',*,*,#11885,.T.); +#12131 = ORIENTED_EDGE('',*,*,#11836,.F.); +#12132 = PLANE('',#12133); +#12133 = AXIS2_PLACEMENT_3D('',#12134,#12135,#12136); +#12134 = CARTESIAN_POINT('',(-0.25,-0.25,1.5106)); +#12135 = DIRECTION('',(0.,0.,1.)); +#12136 = DIRECTION('',(1.,0.,-0.)); +#12137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#12141)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#12138,#12139,#12140)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#12138 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#12139 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#12140 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#12141 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#12138, + 'distance_accuracy_value','confusion accuracy'); +#12142 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12143,#12145); +#12143 = ( REPRESENTATION_RELATIONSHIP('','',#8512,#8489) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12144) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12144 = ITEM_DEFINED_TRANSFORMATION('','',#11,#8490); +#12145 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12146); +#12146 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','=>[0:1:1:5]','',#8484,#8507 + ,$); +#12147 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8509)); +#12148 = SHAPE_DEFINITION_REPRESENTATION(#12149,#12155); +#12149 = PRODUCT_DEFINITION_SHAPE('','',#12150); +#12150 = PRODUCT_DEFINITION('design','',#12151,#12154); +#12151 = PRODUCT_DEFINITION_FORMATION('','',#12152); +#12152 = PRODUCT('SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm', + 'SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm','',(#12153)); +#12153 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12154 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12155 = SHAPE_REPRESENTATION('',(#11,#12156),#12160); +#12156 = AXIS2_PLACEMENT_3D('',#12157,#12158,#12159); +#12157 = CARTESIAN_POINT('',(0.,0.,0.)); +#12158 = DIRECTION('',(0.,0.,1.)); +#12159 = DIRECTION('',(1.,0.,-0.)); +#12160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#12164)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#12161,#12162,#12163)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#12161 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#12162 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#12163 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#12164 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#12161, + 'distance_accuracy_value','confusion accuracy'); +#12165 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12166,#12168); +#12166 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12167) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12167 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#12168 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12169); +#12169 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','SW_MACRO2','',#5,#12150,$ + ); +#12170 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12152)); +#12171 = SHAPE_DEFINITION_REPRESENTATION(#12172,#12178); +#12172 = PRODUCT_DEFINITION_SHAPE('','',#12173); +#12173 = PRODUCT_DEFINITION('design','',#12174,#12177); +#12174 = PRODUCT_DEFINITION_FORMATION('','',#12175); +#12175 = PRODUCT('LinkGroup','LinkGroup','',(#12176)); +#12176 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12177 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12178 = SHAPE_REPRESENTATION('',(#11,#12179,#12183,#12187),#12191); +#12179 = AXIS2_PLACEMENT_3D('',#12180,#12181,#12182); +#12180 = CARTESIAN_POINT('',(0.,0.,0.)); +#12181 = DIRECTION('',(0.,0.,1.)); +#12182 = DIRECTION('',(1.,0.,0.)); +#12183 = AXIS2_PLACEMENT_3D('',#12184,#12185,#12186); +#12184 = CARTESIAN_POINT('',(0.,0.,0.)); +#12185 = DIRECTION('',(0.,0.,1.)); +#12186 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#12187 = AXIS2_PLACEMENT_3D('',#12188,#12189,#12190); +#12188 = CARTESIAN_POINT('',(0.,0.,0.)); +#12189 = DIRECTION('',(0.,0.,1.)); +#12190 = DIRECTION('',(1.,0.,0.)); +#12191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#12195)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#12192,#12193,#12194)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#12192 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#12193 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#12194 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#12195 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#12192, + 'distance_accuracy_value','confusion accuracy'); +#12196 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12197,#12199); +#12197 = ( REPRESENTATION_RELATIONSHIP('','',#12178,#12155) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12198) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12198 = ITEM_DEFINED_TRANSFORMATION('','',#11,#12156); +#12199 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12200); +#12200 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','=>[0:1:1:7]','',#12150, + #12173,$); +#12201 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12175)); +#12202 = SHAPE_DEFINITION_REPRESENTATION(#12203,#12209); +#12203 = PRODUCT_DEFINITION_SHAPE('','',#12204); +#12204 = PRODUCT_DEFINITION('design','',#12205,#12208); +#12205 = PRODUCT_DEFINITION_FORMATION('','',#12206); +#12206 = PRODUCT('pin_1','pin_1','',(#12207)); +#12207 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12208 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12209 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#12210),#12426); +#12210 = MANIFOLD_SOLID_BREP('',#12211); +#12211 = CLOSED_SHELL('',(#12212,#12252,#12283,#12314,#12345,#12376, + #12398,#12412)); +#12212 = ADVANCED_FACE('',(#12213),#12247,.F.); +#12213 = FACE_BOUND('',#12214,.F.); +#12214 = EDGE_LOOP('',(#12215,#12225,#12233,#12241)); +#12215 = ORIENTED_EDGE('',*,*,#12216,.T.); +#12216 = EDGE_CURVE('',#12217,#12219,#12221,.T.); +#12217 = VERTEX_POINT('',#12218); +#12218 = CARTESIAN_POINT('',(-2.,0.7,-1.554312234475E-16)); +#12219 = VERTEX_POINT('',#12220); +#12220 = CARTESIAN_POINT('',(-2.,-0.7,1.554312234475E-16)); +#12221 = LINE('',#12222,#12223); +#12222 = CARTESIAN_POINT('',(-2.,0.7,-1.554312234475E-16)); +#12223 = VECTOR('',#12224,1.); +#12224 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12225 = ORIENTED_EDGE('',*,*,#12226,.T.); +#12226 = EDGE_CURVE('',#12219,#12227,#12229,.T.); +#12227 = VERTEX_POINT('',#12228); +#12228 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12229 = LINE('',#12230,#12231); +#12230 = CARTESIAN_POINT('',(-2.,-0.7,2.22044604925E-16)); +#12231 = VECTOR('',#12232,1.); +#12232 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12233 = ORIENTED_EDGE('',*,*,#12234,.F.); +#12234 = EDGE_CURVE('',#12235,#12227,#12237,.T.); +#12235 = VERTEX_POINT('',#12236); +#12236 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12237 = LINE('',#12238,#12239); +#12238 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12239 = VECTOR('',#12240,1.); +#12240 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12241 = ORIENTED_EDGE('',*,*,#12242,.F.); +#12242 = EDGE_CURVE('',#12217,#12235,#12243,.T.); +#12243 = LINE('',#12244,#12245); +#12244 = CARTESIAN_POINT('',(-2.,0.7,-2.22044604925E-16)); +#12245 = VECTOR('',#12246,1.); +#12246 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12247 = PLANE('',#12248); +#12248 = AXIS2_PLACEMENT_3D('',#12249,#12250,#12251); +#12249 = CARTESIAN_POINT('',(-2.,0.7,-1.554312234475E-16)); +#12250 = DIRECTION('',(-1.,-0.,0.)); +#12251 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12252 = ADVANCED_FACE('',(#12253),#12278,.F.); +#12253 = FACE_BOUND('',#12254,.F.); +#12254 = EDGE_LOOP('',(#12255,#12256,#12264,#12272)); +#12255 = ORIENTED_EDGE('',*,*,#12234,.T.); +#12256 = ORIENTED_EDGE('',*,*,#12257,.T.); +#12257 = EDGE_CURVE('',#12227,#12258,#12260,.T.); +#12258 = VERTEX_POINT('',#12259); +#12259 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12260 = LINE('',#12261,#12262); +#12261 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12262 = VECTOR('',#12263,1.); +#12263 = DIRECTION('',(-1.,0.,0.)); +#12264 = ORIENTED_EDGE('',*,*,#12265,.F.); +#12265 = EDGE_CURVE('',#12266,#12258,#12268,.T.); +#12266 = VERTEX_POINT('',#12267); +#12267 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12268 = LINE('',#12269,#12270); +#12269 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12270 = VECTOR('',#12271,1.); +#12271 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12272 = ORIENTED_EDGE('',*,*,#12273,.F.); +#12273 = EDGE_CURVE('',#12235,#12266,#12274,.T.); +#12274 = LINE('',#12275,#12276); +#12275 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12276 = VECTOR('',#12277,1.); +#12277 = DIRECTION('',(-1.,0.,0.)); +#12278 = PLANE('',#12279); +#12279 = AXIS2_PLACEMENT_3D('',#12280,#12281,#12282); +#12280 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12281 = DIRECTION('',(0.,-2.22044604925E-16,-1.)); +#12282 = DIRECTION('',(-1.,-0.,0.)); +#12283 = ADVANCED_FACE('',(#12284),#12309,.F.); +#12284 = FACE_BOUND('',#12285,.F.); +#12285 = EDGE_LOOP('',(#12286,#12287,#12295,#12303)); +#12286 = ORIENTED_EDGE('',*,*,#12265,.T.); +#12287 = ORIENTED_EDGE('',*,*,#12288,.T.); +#12288 = EDGE_CURVE('',#12258,#12289,#12291,.T.); +#12289 = VERTEX_POINT('',#12290); +#12290 = CARTESIAN_POINT('',(-3.1,-0.7,1.)); +#12291 = LINE('',#12292,#12293); +#12292 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12293 = VECTOR('',#12294,1.); +#12294 = DIRECTION('',(-0.124034734589,2.203299491106E-16,0.992277876714 + )); +#12295 = ORIENTED_EDGE('',*,*,#12296,.F.); +#12296 = EDGE_CURVE('',#12297,#12289,#12299,.T.); +#12297 = VERTEX_POINT('',#12298); +#12298 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12299 = LINE('',#12300,#12301); +#12300 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12301 = VECTOR('',#12302,1.); +#12302 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12303 = ORIENTED_EDGE('',*,*,#12304,.F.); +#12304 = EDGE_CURVE('',#12266,#12297,#12305,.T.); +#12305 = LINE('',#12306,#12307); +#12306 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12307 = VECTOR('',#12308,1.); +#12308 = DIRECTION('',(-0.124034734589,2.203299491106E-16,0.992277876714 + )); +#12309 = PLANE('',#12310); +#12310 = AXIS2_PLACEMENT_3D('',#12311,#12312,#12313); +#12311 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12312 = DIRECTION('',(-0.992277876714,-2.754124363883E-17, + -0.124034734589)); +#12313 = DIRECTION('',(-0.124034734589,2.203299491106E-16,0.992277876714 + )); +#12314 = ADVANCED_FACE('',(#12315),#12340,.F.); +#12315 = FACE_BOUND('',#12316,.F.); +#12316 = EDGE_LOOP('',(#12317,#12318,#12326,#12334)); +#12317 = ORIENTED_EDGE('',*,*,#12296,.T.); +#12318 = ORIENTED_EDGE('',*,*,#12319,.T.); +#12319 = EDGE_CURVE('',#12289,#12320,#12322,.T.); +#12320 = VERTEX_POINT('',#12321); +#12321 = CARTESIAN_POINT('',(-3.3,-0.7,1.)); +#12322 = LINE('',#12323,#12324); +#12323 = CARTESIAN_POINT('',(-3.1,-0.7,1.)); +#12324 = VECTOR('',#12325,1.); +#12325 = DIRECTION('',(-1.,0.,0.)); +#12326 = ORIENTED_EDGE('',*,*,#12327,.F.); +#12327 = EDGE_CURVE('',#12328,#12320,#12330,.T.); +#12328 = VERTEX_POINT('',#12329); +#12329 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12330 = LINE('',#12331,#12332); +#12331 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12332 = VECTOR('',#12333,1.); +#12333 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12334 = ORIENTED_EDGE('',*,*,#12335,.F.); +#12335 = EDGE_CURVE('',#12297,#12328,#12336,.T.); +#12336 = LINE('',#12337,#12338); +#12337 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12338 = VECTOR('',#12339,1.); +#12339 = DIRECTION('',(-1.,0.,0.)); +#12340 = PLANE('',#12341); +#12341 = AXIS2_PLACEMENT_3D('',#12342,#12343,#12344); +#12342 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12343 = DIRECTION('',(0.,-2.22044604925E-16,-1.)); +#12344 = DIRECTION('',(-1.,-0.,0.)); +#12345 = ADVANCED_FACE('',(#12346),#12371,.F.); +#12346 = FACE_BOUND('',#12347,.F.); +#12347 = EDGE_LOOP('',(#12348,#12349,#12357,#12365)); +#12348 = ORIENTED_EDGE('',*,*,#12327,.T.); +#12349 = ORIENTED_EDGE('',*,*,#12350,.T.); +#12350 = EDGE_CURVE('',#12320,#12351,#12353,.T.); +#12351 = VERTEX_POINT('',#12352); +#12352 = CARTESIAN_POINT('',(-3.2,-0.7,1.554312234475E-16)); +#12353 = LINE('',#12354,#12355); +#12354 = CARTESIAN_POINT('',(-3.3,-0.7,1.)); +#12355 = VECTOR('',#12356,1.); +#12356 = DIRECTION('',(9.9503719021E-02,-2.209426397859E-16, + -0.99503719021)); +#12357 = ORIENTED_EDGE('',*,*,#12358,.F.); +#12358 = EDGE_CURVE('',#12359,#12351,#12361,.T.); +#12359 = VERTEX_POINT('',#12360); +#12360 = CARTESIAN_POINT('',(-3.2,0.7,-1.554312234475E-16)); +#12361 = LINE('',#12362,#12363); +#12362 = CARTESIAN_POINT('',(-3.2,0.7,-1.554312234475E-16)); +#12363 = VECTOR('',#12364,1.); +#12364 = DIRECTION('',(0.,-1.,2.22044604925E-16)); +#12365 = ORIENTED_EDGE('',*,*,#12366,.F.); +#12366 = EDGE_CURVE('',#12328,#12359,#12367,.T.); +#12367 = LINE('',#12368,#12369); +#12368 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12369 = VECTOR('',#12370,1.); +#12370 = DIRECTION('',(9.9503719021E-02,-2.209426397859E-16, + -0.99503719021)); +#12371 = PLANE('',#12372); +#12372 = AXIS2_PLACEMENT_3D('',#12373,#12374,#12375); +#12373 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12374 = DIRECTION('',(0.99503719021,2.209426397859E-17,9.9503719021E-02 + )); +#12375 = DIRECTION('',(9.9503719021E-02,-2.209426397859E-16, + -0.99503719021)); +#12376 = ADVANCED_FACE('',(#12377),#12393,.F.); +#12377 = FACE_BOUND('',#12378,.F.); +#12378 = EDGE_LOOP('',(#12379,#12380,#12386,#12387)); +#12379 = ORIENTED_EDGE('',*,*,#12358,.T.); +#12380 = ORIENTED_EDGE('',*,*,#12381,.T.); +#12381 = EDGE_CURVE('',#12351,#12219,#12382,.T.); +#12382 = LINE('',#12383,#12384); +#12383 = CARTESIAN_POINT('',(-3.2,-0.7,2.22044604925E-16)); +#12384 = VECTOR('',#12385,1.); +#12385 = DIRECTION('',(1.,0.,0.)); +#12386 = ORIENTED_EDGE('',*,*,#12216,.F.); +#12387 = ORIENTED_EDGE('',*,*,#12388,.F.); +#12388 = EDGE_CURVE('',#12359,#12217,#12389,.T.); +#12389 = LINE('',#12390,#12391); +#12390 = CARTESIAN_POINT('',(-3.2,0.7,-2.22044604925E-16)); +#12391 = VECTOR('',#12392,1.); +#12392 = DIRECTION('',(1.,0.,0.)); +#12393 = PLANE('',#12394); +#12394 = AXIS2_PLACEMENT_3D('',#12395,#12396,#12397); +#12395 = CARTESIAN_POINT('',(-3.2,0.7,-1.554312234475E-16)); +#12396 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12397 = DIRECTION('',(1.,0.,-0.)); +#12398 = ADVANCED_FACE('',(#12399),#12407,.T.); +#12399 = FACE_BOUND('',#12400,.F.); +#12400 = EDGE_LOOP('',(#12401,#12402,#12403,#12404,#12405,#12406)); +#12401 = ORIENTED_EDGE('',*,*,#12242,.T.); +#12402 = ORIENTED_EDGE('',*,*,#12273,.T.); +#12403 = ORIENTED_EDGE('',*,*,#12304,.T.); +#12404 = ORIENTED_EDGE('',*,*,#12335,.T.); +#12405 = ORIENTED_EDGE('',*,*,#12366,.T.); +#12406 = ORIENTED_EDGE('',*,*,#12388,.T.); +#12407 = PLANE('',#12408); +#12408 = AXIS2_PLACEMENT_3D('',#12409,#12410,#12411); +#12409 = CARTESIAN_POINT('',(-2.807662482876,0.7,0.318785136547)); +#12410 = DIRECTION('',(-1.266062631321E-48,1.,-2.22044604925E-16)); +#12411 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12412 = ADVANCED_FACE('',(#12413),#12421,.F.); +#12413 = FACE_BOUND('',#12414,.T.); +#12414 = EDGE_LOOP('',(#12415,#12416,#12417,#12418,#12419,#12420)); +#12415 = ORIENTED_EDGE('',*,*,#12226,.T.); +#12416 = ORIENTED_EDGE('',*,*,#12257,.T.); +#12417 = ORIENTED_EDGE('',*,*,#12288,.T.); +#12418 = ORIENTED_EDGE('',*,*,#12319,.T.); +#12419 = ORIENTED_EDGE('',*,*,#12350,.T.); +#12420 = ORIENTED_EDGE('',*,*,#12381,.T.); +#12421 = PLANE('',#12422); +#12422 = AXIS2_PLACEMENT_3D('',#12423,#12424,#12425); +#12423 = CARTESIAN_POINT('',(-2.807662482876,-0.7,0.318785136547)); +#12424 = DIRECTION('',(-1.266062631321E-48,1.,-2.22044604925E-16)); +#12425 = DIRECTION('',(0.,2.22044604925E-16,1.)); +#12426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#12430)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#12427,#12428,#12429)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#12427 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#12428 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#12429 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#12430 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#12427, + 'distance_accuracy_value','confusion accuracy'); +#12431 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12432,#12434); +#12432 = ( REPRESENTATION_RELATIONSHIP('','',#12209,#12178) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12433) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12433 = ITEM_DEFINED_TRANSFORMATION('','',#11,#12179); +#12434 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12435); +#12435 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','pin_1','',#12173,#12204,$); +#12436 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12206)); +#12437 = SHAPE_DEFINITION_REPRESENTATION(#12438,#12444); +#12438 = PRODUCT_DEFINITION_SHAPE('','',#12439); +#12439 = PRODUCT_DEFINITION('design','',#12440,#12443); +#12440 = PRODUCT_DEFINITION_FORMATION('','',#12441); +#12441 = PRODUCT('pin_2','pin_2','',(#12442)); +#12442 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12443 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12444 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#12445),#12661); +#12445 = MANIFOLD_SOLID_BREP('',#12446); +#12446 = CLOSED_SHELL('',(#12447,#12487,#12518,#12549,#12580,#12611, + #12633,#12647)); +#12447 = ADVANCED_FACE('',(#12448),#12482,.F.); +#12448 = FACE_BOUND('',#12449,.F.); +#12449 = EDGE_LOOP('',(#12450,#12460,#12468,#12476)); +#12450 = ORIENTED_EDGE('',*,*,#12451,.T.); +#12451 = EDGE_CURVE('',#12452,#12454,#12456,.T.); +#12452 = VERTEX_POINT('',#12453); +#12453 = CARTESIAN_POINT('',(-2.,0.7,-0.)); +#12454 = VERTEX_POINT('',#12455); +#12455 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#12456 = LINE('',#12457,#12458); +#12457 = CARTESIAN_POINT('',(-2.,0.7,-1.6E-16)); +#12458 = VECTOR('',#12459,1.); +#12459 = DIRECTION('',(0.,-1.,2.2E-16)); +#12460 = ORIENTED_EDGE('',*,*,#12461,.T.); +#12461 = EDGE_CURVE('',#12454,#12462,#12464,.T.); +#12462 = VERTEX_POINT('',#12463); +#12463 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12464 = LINE('',#12465,#12466); +#12465 = CARTESIAN_POINT('',(-2.,-0.7,-1.110223024625E-16)); +#12466 = VECTOR('',#12467,1.); +#12467 = DIRECTION('',(0.,-2.2E-16,1.)); +#12468 = ORIENTED_EDGE('',*,*,#12469,.F.); +#12469 = EDGE_CURVE('',#12470,#12462,#12472,.T.); +#12470 = VERTEX_POINT('',#12471); +#12471 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12472 = LINE('',#12473,#12474); +#12473 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12474 = VECTOR('',#12475,1.); +#12475 = DIRECTION('',(0.,-1.,2.2E-16)); +#12476 = ORIENTED_EDGE('',*,*,#12477,.F.); +#12477 = EDGE_CURVE('',#12452,#12470,#12478,.T.); +#12478 = LINE('',#12479,#12480); +#12479 = CARTESIAN_POINT('',(-2.,0.7,1.110223024625E-16)); +#12480 = VECTOR('',#12481,1.); +#12481 = DIRECTION('',(0.,-2.2E-16,1.)); +#12482 = PLANE('',#12483); +#12483 = AXIS2_PLACEMENT_3D('',#12484,#12485,#12486); +#12484 = CARTESIAN_POINT('',(-2.,0.7,-1.6E-16)); +#12485 = DIRECTION('',(-1.,-0.,0.)); +#12486 = DIRECTION('',(0.,2.2E-16,1.)); +#12487 = ADVANCED_FACE('',(#12488),#12513,.F.); +#12488 = FACE_BOUND('',#12489,.F.); +#12489 = EDGE_LOOP('',(#12490,#12491,#12499,#12507)); +#12490 = ORIENTED_EDGE('',*,*,#12469,.T.); +#12491 = ORIENTED_EDGE('',*,*,#12492,.T.); +#12492 = EDGE_CURVE('',#12462,#12493,#12495,.T.); +#12493 = VERTEX_POINT('',#12494); +#12494 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12495 = LINE('',#12496,#12497); +#12496 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12497 = VECTOR('',#12498,1.); +#12498 = DIRECTION('',(-1.,0.,0.)); +#12499 = ORIENTED_EDGE('',*,*,#12500,.F.); +#12500 = EDGE_CURVE('',#12501,#12493,#12503,.T.); +#12501 = VERTEX_POINT('',#12502); +#12502 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12503 = LINE('',#12504,#12505); +#12504 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12505 = VECTOR('',#12506,1.); +#12506 = DIRECTION('',(0.,-1.,2.2E-16)); +#12507 = ORIENTED_EDGE('',*,*,#12508,.F.); +#12508 = EDGE_CURVE('',#12470,#12501,#12509,.T.); +#12509 = LINE('',#12510,#12511); +#12510 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12511 = VECTOR('',#12512,1.); +#12512 = DIRECTION('',(-1.,0.,0.)); +#12513 = PLANE('',#12514); +#12514 = AXIS2_PLACEMENT_3D('',#12515,#12516,#12517); +#12515 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12516 = DIRECTION('',(0.,-2.2E-16,-1.)); +#12517 = DIRECTION('',(-1.,-0.,0.)); +#12518 = ADVANCED_FACE('',(#12519),#12544,.F.); +#12519 = FACE_BOUND('',#12520,.F.); +#12520 = EDGE_LOOP('',(#12521,#12522,#12530,#12538)); +#12521 = ORIENTED_EDGE('',*,*,#12500,.T.); +#12522 = ORIENTED_EDGE('',*,*,#12523,.T.); +#12523 = EDGE_CURVE('',#12493,#12524,#12526,.T.); +#12524 = VERTEX_POINT('',#12525); +#12525 = CARTESIAN_POINT('',(-3.1,-0.7,1.)); +#12526 = LINE('',#12527,#12528); +#12527 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12528 = VECTOR('',#12529,1.); +#12529 = DIRECTION('',(-0.124034734589,-2.199999999999E-16, + 0.992277876714)); +#12530 = ORIENTED_EDGE('',*,*,#12531,.F.); +#12531 = EDGE_CURVE('',#12532,#12524,#12534,.T.); +#12532 = VERTEX_POINT('',#12533); +#12533 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12534 = LINE('',#12535,#12536); +#12535 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12536 = VECTOR('',#12537,1.); +#12537 = DIRECTION('',(0.,-1.,2.2E-16)); +#12538 = ORIENTED_EDGE('',*,*,#12539,.F.); +#12539 = EDGE_CURVE('',#12501,#12532,#12540,.T.); +#12540 = LINE('',#12541,#12542); +#12541 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12542 = VECTOR('',#12543,1.); +#12543 = DIRECTION('',(-0.124034734589,-2.199999999999E-16, + 0.992277876714)); +#12544 = PLANE('',#12545); +#12545 = AXIS2_PLACEMENT_3D('',#12546,#12547,#12548); +#12546 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12547 = DIRECTION('',(-0.992277876714,-2.999999999999E-17, + -0.124034734589)); +#12548 = DIRECTION('',(-0.124034734589,2.199999999999E-16,0.992277876714 + )); +#12549 = ADVANCED_FACE('',(#12550),#12575,.F.); +#12550 = FACE_BOUND('',#12551,.F.); +#12551 = EDGE_LOOP('',(#12552,#12553,#12561,#12569)); +#12552 = ORIENTED_EDGE('',*,*,#12531,.T.); +#12553 = ORIENTED_EDGE('',*,*,#12554,.T.); +#12554 = EDGE_CURVE('',#12524,#12555,#12557,.T.); +#12555 = VERTEX_POINT('',#12556); +#12556 = CARTESIAN_POINT('',(-3.3,-0.7,1.)); +#12557 = LINE('',#12558,#12559); +#12558 = CARTESIAN_POINT('',(-3.1,-0.7,1.)); +#12559 = VECTOR('',#12560,1.); +#12560 = DIRECTION('',(-1.,0.,0.)); +#12561 = ORIENTED_EDGE('',*,*,#12562,.F.); +#12562 = EDGE_CURVE('',#12563,#12555,#12565,.T.); +#12563 = VERTEX_POINT('',#12564); +#12564 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12565 = LINE('',#12566,#12567); +#12566 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12567 = VECTOR('',#12568,1.); +#12568 = DIRECTION('',(0.,-1.,2.2E-16)); +#12569 = ORIENTED_EDGE('',*,*,#12570,.F.); +#12570 = EDGE_CURVE('',#12532,#12563,#12571,.T.); +#12571 = LINE('',#12572,#12573); +#12572 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12573 = VECTOR('',#12574,1.); +#12574 = DIRECTION('',(-1.,0.,0.)); +#12575 = PLANE('',#12576); +#12576 = AXIS2_PLACEMENT_3D('',#12577,#12578,#12579); +#12577 = CARTESIAN_POINT('',(-3.1,0.7,1.)); +#12578 = DIRECTION('',(0.,-2.2E-16,-1.)); +#12579 = DIRECTION('',(-1.,-0.,0.)); +#12580 = ADVANCED_FACE('',(#12581),#12606,.F.); +#12581 = FACE_BOUND('',#12582,.F.); +#12582 = EDGE_LOOP('',(#12583,#12584,#12592,#12600)); +#12583 = ORIENTED_EDGE('',*,*,#12562,.T.); +#12584 = ORIENTED_EDGE('',*,*,#12585,.T.); +#12585 = EDGE_CURVE('',#12555,#12586,#12588,.T.); +#12586 = VERTEX_POINT('',#12587); +#12587 = CARTESIAN_POINT('',(-3.2,-0.7,0.)); +#12588 = LINE('',#12589,#12590); +#12589 = CARTESIAN_POINT('',(-3.3,-0.7,1.)); +#12590 = VECTOR('',#12591,1.); +#12591 = DIRECTION('',(9.9503719021E-02,2.2E-16,-0.99503719021)); +#12592 = ORIENTED_EDGE('',*,*,#12593,.F.); +#12593 = EDGE_CURVE('',#12594,#12586,#12596,.T.); +#12594 = VERTEX_POINT('',#12595); +#12595 = CARTESIAN_POINT('',(-3.2,0.7,-0.)); +#12596 = LINE('',#12597,#12598); +#12597 = CARTESIAN_POINT('',(-3.2,0.7,-1.6E-16)); +#12598 = VECTOR('',#12599,1.); +#12599 = DIRECTION('',(0.,-1.,2.2E-16)); +#12600 = ORIENTED_EDGE('',*,*,#12601,.F.); +#12601 = EDGE_CURVE('',#12563,#12594,#12602,.T.); +#12602 = LINE('',#12603,#12604); +#12603 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12604 = VECTOR('',#12605,1.); +#12605 = DIRECTION('',(9.9503719021E-02,2.2E-16,-0.99503719021)); +#12606 = PLANE('',#12607); +#12607 = AXIS2_PLACEMENT_3D('',#12608,#12609,#12610); +#12608 = CARTESIAN_POINT('',(-3.3,0.7,1.)); +#12609 = DIRECTION('',(0.99503719021,2.E-17,9.9503719021E-02)); +#12610 = DIRECTION('',(9.9503719021E-02,-2.2E-16,-0.99503719021)); +#12611 = ADVANCED_FACE('',(#12612),#12628,.F.); +#12612 = FACE_BOUND('',#12613,.F.); +#12613 = EDGE_LOOP('',(#12614,#12615,#12621,#12622)); +#12614 = ORIENTED_EDGE('',*,*,#12593,.T.); +#12615 = ORIENTED_EDGE('',*,*,#12616,.T.); +#12616 = EDGE_CURVE('',#12586,#12454,#12617,.T.); +#12617 = LINE('',#12618,#12619); +#12618 = CARTESIAN_POINT('',(-3.2,-0.7,-1.110223024625E-16)); +#12619 = VECTOR('',#12620,1.); +#12620 = DIRECTION('',(1.,0.,0.)); +#12621 = ORIENTED_EDGE('',*,*,#12451,.F.); +#12622 = ORIENTED_EDGE('',*,*,#12623,.F.); +#12623 = EDGE_CURVE('',#12594,#12452,#12624,.T.); +#12624 = LINE('',#12625,#12626); +#12625 = CARTESIAN_POINT('',(-3.2,0.7,1.110223024625E-16)); +#12626 = VECTOR('',#12627,1.); +#12627 = DIRECTION('',(1.,0.,0.)); +#12628 = PLANE('',#12629); +#12629 = AXIS2_PLACEMENT_3D('',#12630,#12631,#12632); +#12630 = CARTESIAN_POINT('',(-3.2,0.7,-1.6E-16)); +#12631 = DIRECTION('',(0.,2.2E-16,1.)); +#12632 = DIRECTION('',(1.,0.,-0.)); +#12633 = ADVANCED_FACE('',(#12634),#12642,.T.); +#12634 = FACE_BOUND('',#12635,.F.); +#12635 = EDGE_LOOP('',(#12636,#12637,#12638,#12639,#12640,#12641)); +#12636 = ORIENTED_EDGE('',*,*,#12477,.T.); +#12637 = ORIENTED_EDGE('',*,*,#12508,.T.); +#12638 = ORIENTED_EDGE('',*,*,#12539,.T.); +#12639 = ORIENTED_EDGE('',*,*,#12570,.T.); +#12640 = ORIENTED_EDGE('',*,*,#12601,.T.); +#12641 = ORIENTED_EDGE('',*,*,#12623,.T.); +#12642 = PLANE('',#12643); +#12643 = AXIS2_PLACEMENT_3D('',#12644,#12645,#12646); +#12644 = CARTESIAN_POINT('',(-2.807662482876,0.7,0.318785136547)); +#12645 = DIRECTION('',(0.,1.,0.)); +#12646 = DIRECTION('',(0.,-0.,1.)); +#12647 = ADVANCED_FACE('',(#12648),#12656,.F.); +#12648 = FACE_BOUND('',#12649,.T.); +#12649 = EDGE_LOOP('',(#12650,#12651,#12652,#12653,#12654,#12655)); +#12650 = ORIENTED_EDGE('',*,*,#12461,.T.); +#12651 = ORIENTED_EDGE('',*,*,#12492,.T.); +#12652 = ORIENTED_EDGE('',*,*,#12523,.T.); +#12653 = ORIENTED_EDGE('',*,*,#12554,.T.); +#12654 = ORIENTED_EDGE('',*,*,#12585,.T.); +#12655 = ORIENTED_EDGE('',*,*,#12616,.T.); +#12656 = PLANE('',#12657); +#12657 = AXIS2_PLACEMENT_3D('',#12658,#12659,#12660); +#12658 = CARTESIAN_POINT('',(-2.807662482876,-0.7,0.318785136547)); +#12659 = DIRECTION('',(0.,1.,0.)); +#12660 = DIRECTION('',(0.,-0.,1.)); +#12661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#12665)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#12662,#12663,#12664)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#12662 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#12663 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#12664 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#12665 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#12662, + 'distance_accuracy_value','confusion accuracy'); +#12666 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#12667,#12669); +#12667 = ( REPRESENTATION_RELATIONSHIP('','',#12444,#12178) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#12668) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#12668 = ITEM_DEFINED_TRANSFORMATION('','',#11,#12183); +#12669 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #12670); +#12670 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','pin_2','',#12173,#12439,$); +#12671 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12441)); +#12672 = SHAPE_DEFINITION_REPRESENTATION(#12673,#12679); +#12673 = PRODUCT_DEFINITION_SHAPE('','',#12674); +#12674 = PRODUCT_DEFINITION('design','',#12675,#12678); +#12675 = PRODUCT_DEFINITION_FORMATION('','',#12676); +#12676 = PRODUCT('Body','Body','',(#12677)); +#12677 = PRODUCT_CONTEXT('',#2,'mechanical'); +#12678 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#12679 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#12680),#13545); +#12680 = MANIFOLD_SOLID_BREP('',#12681); +#12681 = CLOSED_SHELL('',(#12682,#12754,#12872,#12896,#12920,#12937, + #12961,#13083,#13100,#13112,#13129,#13146,#13186,#13210,#13234, + #13251,#13268,#13280,#13311,#13335,#13359,#13383,#13407,#13431, + #13455,#13472,#13484,#13511,#13536)); +#12682 = ADVANCED_FACE('',(#12683),#12749,.T.); +#12683 = FACE_BOUND('',#12684,.T.); +#12684 = EDGE_LOOP('',(#12685,#12695,#12703,#12711,#12719,#12727,#12735, + #12743)); +#12685 = ORIENTED_EDGE('',*,*,#12686,.F.); +#12686 = EDGE_CURVE('',#12687,#12689,#12691,.T.); +#12687 = VERTEX_POINT('',#12688); +#12688 = CARTESIAN_POINT('',(-3.,-1.8,0.)); +#12689 = VERTEX_POINT('',#12690); +#12690 = CARTESIAN_POINT('',(-3.,-0.7,0.)); +#12691 = LINE('',#12692,#12693); +#12692 = CARTESIAN_POINT('',(-3.,-1.8,0.)); +#12693 = VECTOR('',#12694,1.); +#12694 = DIRECTION('',(0.,1.,0.)); +#12695 = ORIENTED_EDGE('',*,*,#12696,.T.); +#12696 = EDGE_CURVE('',#12687,#12697,#12699,.T.); +#12697 = VERTEX_POINT('',#12698); +#12698 = CARTESIAN_POINT('',(-3.,-1.8,3.5)); +#12699 = LINE('',#12700,#12701); +#12700 = CARTESIAN_POINT('',(-3.,-1.8,0.)); +#12701 = VECTOR('',#12702,1.); +#12702 = DIRECTION('',(0.,0.,1.)); +#12703 = ORIENTED_EDGE('',*,*,#12704,.T.); +#12704 = EDGE_CURVE('',#12697,#12705,#12707,.T.); +#12705 = VERTEX_POINT('',#12706); +#12706 = CARTESIAN_POINT('',(-3.,1.8,3.5)); +#12707 = LINE('',#12708,#12709); +#12708 = CARTESIAN_POINT('',(-3.,-1.8,3.5)); +#12709 = VECTOR('',#12710,1.); +#12710 = DIRECTION('',(0.,1.,0.)); +#12711 = ORIENTED_EDGE('',*,*,#12712,.F.); +#12712 = EDGE_CURVE('',#12713,#12705,#12715,.T.); +#12713 = VERTEX_POINT('',#12714); +#12714 = CARTESIAN_POINT('',(-3.,1.8,0.)); +#12715 = LINE('',#12716,#12717); +#12716 = CARTESIAN_POINT('',(-3.,1.8,0.)); +#12717 = VECTOR('',#12718,1.); +#12718 = DIRECTION('',(0.,0.,1.)); +#12719 = ORIENTED_EDGE('',*,*,#12720,.F.); +#12720 = EDGE_CURVE('',#12721,#12713,#12723,.T.); +#12721 = VERTEX_POINT('',#12722); +#12722 = CARTESIAN_POINT('',(-3.,0.7,0.)); +#12723 = LINE('',#12724,#12725); +#12724 = CARTESIAN_POINT('',(-3.,-1.8,0.)); +#12725 = VECTOR('',#12726,1.); +#12726 = DIRECTION('',(0.,1.,0.)); +#12727 = ORIENTED_EDGE('',*,*,#12728,.T.); +#12728 = EDGE_CURVE('',#12721,#12729,#12731,.T.); +#12729 = VERTEX_POINT('',#12730); +#12730 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12731 = LINE('',#12732,#12733); +#12732 = CARTESIAN_POINT('',(-3.,0.7,0.)); +#12733 = VECTOR('',#12734,1.); +#12734 = DIRECTION('',(0.,0.,1.)); +#12735 = ORIENTED_EDGE('',*,*,#12736,.F.); +#12736 = EDGE_CURVE('',#12737,#12729,#12739,.T.); +#12737 = VERTEX_POINT('',#12738); +#12738 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12739 = LINE('',#12740,#12741); +#12740 = CARTESIAN_POINT('',(-3.,-0.7,0.2)); +#12741 = VECTOR('',#12742,1.); +#12742 = DIRECTION('',(0.,1.,0.)); +#12743 = ORIENTED_EDGE('',*,*,#12744,.F.); +#12744 = EDGE_CURVE('',#12689,#12737,#12745,.T.); +#12745 = LINE('',#12746,#12747); +#12746 = CARTESIAN_POINT('',(-3.,-0.7,0.)); +#12747 = VECTOR('',#12748,1.); +#12748 = DIRECTION('',(0.,0.,1.)); +#12749 = PLANE('',#12750); +#12750 = AXIS2_PLACEMENT_3D('',#12751,#12752,#12753); +#12751 = CARTESIAN_POINT('',(-3.,-1.8,0.)); +#12752 = DIRECTION('',(-1.,0.,0.)); +#12753 = DIRECTION('',(0.,1.,0.)); +#12754 = ADVANCED_FACE('',(#12755),#12867,.F.); +#12755 = FACE_BOUND('',#12756,.F.); +#12756 = EDGE_LOOP('',(#12757,#12758,#12766,#12774,#12782,#12790,#12798, + #12806,#12814,#12822,#12830,#12838,#12844,#12845,#12853,#12861)); +#12757 = ORIENTED_EDGE('',*,*,#12686,.F.); +#12758 = ORIENTED_EDGE('',*,*,#12759,.F.); +#12759 = EDGE_CURVE('',#12760,#12687,#12762,.T.); +#12760 = VERTEX_POINT('',#12761); +#12761 = CARTESIAN_POINT('',(-1.8,-3.,0.)); +#12762 = LINE('',#12763,#12764); +#12763 = CARTESIAN_POINT('',(-1.8,-3.,0.)); +#12764 = VECTOR('',#12765,1.); +#12765 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#12766 = ORIENTED_EDGE('',*,*,#12767,.F.); +#12767 = EDGE_CURVE('',#12768,#12760,#12770,.T.); +#12768 = VERTEX_POINT('',#12769); +#12769 = CARTESIAN_POINT('',(1.8,-3.,0.)); +#12770 = LINE('',#12771,#12772); +#12771 = CARTESIAN_POINT('',(1.8,-3.,0.)); +#12772 = VECTOR('',#12773,1.); +#12773 = DIRECTION('',(-1.,0.,0.)); +#12774 = ORIENTED_EDGE('',*,*,#12775,.F.); +#12775 = EDGE_CURVE('',#12776,#12768,#12778,.T.); +#12776 = VERTEX_POINT('',#12777); +#12777 = CARTESIAN_POINT('',(3.,-1.8,0.)); +#12778 = LINE('',#12779,#12780); +#12779 = CARTESIAN_POINT('',(3.,-1.8,0.)); +#12780 = VECTOR('',#12781,1.); +#12781 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#12782 = ORIENTED_EDGE('',*,*,#12783,.F.); +#12783 = EDGE_CURVE('',#12784,#12776,#12786,.T.); +#12784 = VERTEX_POINT('',#12785); +#12785 = CARTESIAN_POINT('',(3.,-0.7,0.)); +#12786 = LINE('',#12787,#12788); +#12787 = CARTESIAN_POINT('',(3.,1.8,0.)); +#12788 = VECTOR('',#12789,1.); +#12789 = DIRECTION('',(0.,-1.,0.)); +#12790 = ORIENTED_EDGE('',*,*,#12791,.F.); +#12791 = EDGE_CURVE('',#12792,#12784,#12794,.T.); +#12792 = VERTEX_POINT('',#12793); +#12793 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#12794 = LINE('',#12795,#12796); +#12795 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#12796 = VECTOR('',#12797,1.); +#12797 = DIRECTION('',(1.,0.,0.)); +#12798 = ORIENTED_EDGE('',*,*,#12799,.F.); +#12799 = EDGE_CURVE('',#12800,#12792,#12802,.T.); +#12800 = VERTEX_POINT('',#12801); +#12801 = CARTESIAN_POINT('',(2.,0.7,0.)); +#12802 = LINE('',#12803,#12804); +#12803 = CARTESIAN_POINT('',(2.,0.7,0.)); +#12804 = VECTOR('',#12805,1.); +#12805 = DIRECTION('',(0.,-1.,0.)); +#12806 = ORIENTED_EDGE('',*,*,#12807,.F.); +#12807 = EDGE_CURVE('',#12808,#12800,#12810,.T.); +#12808 = VERTEX_POINT('',#12809); +#12809 = CARTESIAN_POINT('',(3.,0.7,0.)); +#12810 = LINE('',#12811,#12812); +#12811 = CARTESIAN_POINT('',(3.,0.7,0.)); +#12812 = VECTOR('',#12813,1.); +#12813 = DIRECTION('',(-1.,0.,0.)); +#12814 = ORIENTED_EDGE('',*,*,#12815,.F.); +#12815 = EDGE_CURVE('',#12816,#12808,#12818,.T.); +#12816 = VERTEX_POINT('',#12817); +#12817 = CARTESIAN_POINT('',(3.,1.8,0.)); +#12818 = LINE('',#12819,#12820); +#12819 = CARTESIAN_POINT('',(3.,1.8,0.)); +#12820 = VECTOR('',#12821,1.); +#12821 = DIRECTION('',(0.,-1.,0.)); +#12822 = ORIENTED_EDGE('',*,*,#12823,.F.); +#12823 = EDGE_CURVE('',#12824,#12816,#12826,.T.); +#12824 = VERTEX_POINT('',#12825); +#12825 = CARTESIAN_POINT('',(1.8,3.,0.)); +#12826 = LINE('',#12827,#12828); +#12827 = CARTESIAN_POINT('',(1.8,3.,0.)); +#12828 = VECTOR('',#12829,1.); +#12829 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#12830 = ORIENTED_EDGE('',*,*,#12831,.F.); +#12831 = EDGE_CURVE('',#12832,#12824,#12834,.T.); +#12832 = VERTEX_POINT('',#12833); +#12833 = CARTESIAN_POINT('',(-1.8,3.,0.)); +#12834 = LINE('',#12835,#12836); +#12835 = CARTESIAN_POINT('',(-1.8,3.,0.)); +#12836 = VECTOR('',#12837,1.); +#12837 = DIRECTION('',(1.,0.,0.)); +#12838 = ORIENTED_EDGE('',*,*,#12839,.F.); +#12839 = EDGE_CURVE('',#12713,#12832,#12840,.T.); +#12840 = LINE('',#12841,#12842); +#12841 = CARTESIAN_POINT('',(-3.,1.8,0.)); +#12842 = VECTOR('',#12843,1.); +#12843 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#12844 = ORIENTED_EDGE('',*,*,#12720,.F.); +#12845 = ORIENTED_EDGE('',*,*,#12846,.T.); +#12846 = EDGE_CURVE('',#12721,#12847,#12849,.T.); +#12847 = VERTEX_POINT('',#12848); +#12848 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#12849 = LINE('',#12850,#12851); +#12850 = CARTESIAN_POINT('',(-3.,0.7,0.)); +#12851 = VECTOR('',#12852,1.); +#12852 = DIRECTION('',(1.,0.,0.)); +#12853 = ORIENTED_EDGE('',*,*,#12854,.T.); +#12854 = EDGE_CURVE('',#12847,#12855,#12857,.T.); +#12855 = VERTEX_POINT('',#12856); +#12856 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#12857 = LINE('',#12858,#12859); +#12858 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#12859 = VECTOR('',#12860,1.); +#12860 = DIRECTION('',(0.,-1.,0.)); +#12861 = ORIENTED_EDGE('',*,*,#12862,.T.); +#12862 = EDGE_CURVE('',#12855,#12689,#12863,.T.); +#12863 = LINE('',#12864,#12865); +#12864 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#12865 = VECTOR('',#12866,1.); +#12866 = DIRECTION('',(-1.,0.,0.)); +#12867 = PLANE('',#12868); +#12868 = AXIS2_PLACEMENT_3D('',#12869,#12870,#12871); +#12869 = CARTESIAN_POINT('',(-6.287773625685E-17,3.699306816444E-15,0.) + ); +#12870 = DIRECTION('',(0.,0.,1.)); +#12871 = DIRECTION('',(1.,0.,-0.)); +#12872 = ADVANCED_FACE('',(#12873),#12891,.F.); +#12873 = FACE_BOUND('',#12874,.F.); +#12874 = EDGE_LOOP('',(#12875,#12883,#12889,#12890)); +#12875 = ORIENTED_EDGE('',*,*,#12876,.T.); +#12876 = EDGE_CURVE('',#12855,#12877,#12879,.T.); +#12877 = VERTEX_POINT('',#12878); +#12878 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12879 = LINE('',#12880,#12881); +#12880 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#12881 = VECTOR('',#12882,1.); +#12882 = DIRECTION('',(0.,0.,1.)); +#12883 = ORIENTED_EDGE('',*,*,#12884,.T.); +#12884 = EDGE_CURVE('',#12877,#12737,#12885,.T.); +#12885 = LINE('',#12886,#12887); +#12886 = CARTESIAN_POINT('',(-2.,-0.7,0.2)); +#12887 = VECTOR('',#12888,1.); +#12888 = DIRECTION('',(-1.,0.,0.)); +#12889 = ORIENTED_EDGE('',*,*,#12744,.F.); +#12890 = ORIENTED_EDGE('',*,*,#12862,.F.); +#12891 = PLANE('',#12892); +#12892 = AXIS2_PLACEMENT_3D('',#12893,#12894,#12895); +#12893 = CARTESIAN_POINT('',(-2.,-0.7,0.)); +#12894 = DIRECTION('',(0.,-1.,0.)); +#12895 = DIRECTION('',(-1.,0.,0.)); +#12896 = ADVANCED_FACE('',(#12897),#12915,.F.); +#12897 = FACE_BOUND('',#12898,.T.); +#12898 = EDGE_LOOP('',(#12899,#12907,#12913,#12914)); +#12899 = ORIENTED_EDGE('',*,*,#12900,.T.); +#12900 = EDGE_CURVE('',#12729,#12901,#12903,.T.); +#12901 = VERTEX_POINT('',#12902); +#12902 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12903 = LINE('',#12904,#12905); +#12904 = CARTESIAN_POINT('',(-3.,0.7,0.2)); +#12905 = VECTOR('',#12906,1.); +#12906 = DIRECTION('',(1.,0.,0.)); +#12907 = ORIENTED_EDGE('',*,*,#12908,.T.); +#12908 = EDGE_CURVE('',#12901,#12877,#12909,.T.); +#12909 = LINE('',#12910,#12911); +#12910 = CARTESIAN_POINT('',(-2.,0.7,0.2)); +#12911 = VECTOR('',#12912,1.); +#12912 = DIRECTION('',(0.,-1.,0.)); +#12913 = ORIENTED_EDGE('',*,*,#12884,.T.); +#12914 = ORIENTED_EDGE('',*,*,#12736,.T.); +#12915 = PLANE('',#12916); +#12916 = AXIS2_PLACEMENT_3D('',#12917,#12918,#12919); +#12917 = CARTESIAN_POINT('',(1.850371707709E-16,0.,0.2)); +#12918 = DIRECTION('',(0.,0.,1.)); +#12919 = DIRECTION('',(1.,0.,-0.)); +#12920 = ADVANCED_FACE('',(#12921),#12932,.F.); +#12921 = FACE_BOUND('',#12922,.F.); +#12922 = EDGE_LOOP('',(#12923,#12924,#12925,#12931)); +#12923 = ORIENTED_EDGE('',*,*,#12728,.T.); +#12924 = ORIENTED_EDGE('',*,*,#12900,.T.); +#12925 = ORIENTED_EDGE('',*,*,#12926,.F.); +#12926 = EDGE_CURVE('',#12847,#12901,#12927,.T.); +#12927 = LINE('',#12928,#12929); +#12928 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#12929 = VECTOR('',#12930,1.); +#12930 = DIRECTION('',(0.,0.,1.)); +#12931 = ORIENTED_EDGE('',*,*,#12846,.F.); +#12932 = PLANE('',#12933); +#12933 = AXIS2_PLACEMENT_3D('',#12934,#12935,#12936); +#12934 = CARTESIAN_POINT('',(-3.,0.7,0.)); +#12935 = DIRECTION('',(0.,1.,0.)); +#12936 = DIRECTION('',(1.,0.,0.)); +#12937 = ADVANCED_FACE('',(#12938),#12956,.T.); +#12938 = FACE_BOUND('',#12939,.T.); +#12939 = EDGE_LOOP('',(#12940,#12941,#12949,#12955)); +#12940 = ORIENTED_EDGE('',*,*,#12712,.T.); +#12941 = ORIENTED_EDGE('',*,*,#12942,.T.); +#12942 = EDGE_CURVE('',#12705,#12943,#12945,.T.); +#12943 = VERTEX_POINT('',#12944); +#12944 = CARTESIAN_POINT('',(-1.8,3.,3.5)); +#12945 = LINE('',#12946,#12947); +#12946 = CARTESIAN_POINT('',(-3.,1.8,3.5)); +#12947 = VECTOR('',#12948,1.); +#12948 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#12949 = ORIENTED_EDGE('',*,*,#12950,.F.); +#12950 = EDGE_CURVE('',#12832,#12943,#12951,.T.); +#12951 = LINE('',#12952,#12953); +#12952 = CARTESIAN_POINT('',(-1.8,3.,0.)); +#12953 = VECTOR('',#12954,1.); +#12954 = DIRECTION('',(0.,0.,1.)); +#12955 = ORIENTED_EDGE('',*,*,#12839,.F.); +#12956 = PLANE('',#12957); +#12957 = AXIS2_PLACEMENT_3D('',#12958,#12959,#12960); +#12958 = CARTESIAN_POINT('',(-3.,1.8,0.)); +#12959 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#12960 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#12961 = ADVANCED_FACE('',(#12962,#13012),#13078,.T.); +#12962 = FACE_BOUND('',#12963,.T.); +#12963 = EDGE_LOOP('',(#12964,#12965,#12973,#12981,#12989,#12997,#13005, + #13011)); +#12964 = ORIENTED_EDGE('',*,*,#12704,.F.); +#12965 = ORIENTED_EDGE('',*,*,#12966,.F.); +#12966 = EDGE_CURVE('',#12967,#12697,#12969,.T.); +#12967 = VERTEX_POINT('',#12968); +#12968 = CARTESIAN_POINT('',(-1.8,-3.,3.5)); +#12969 = LINE('',#12970,#12971); +#12970 = CARTESIAN_POINT('',(-1.8,-3.,3.5)); +#12971 = VECTOR('',#12972,1.); +#12972 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#12973 = ORIENTED_EDGE('',*,*,#12974,.F.); +#12974 = EDGE_CURVE('',#12975,#12967,#12977,.T.); +#12975 = VERTEX_POINT('',#12976); +#12976 = CARTESIAN_POINT('',(1.8,-3.,3.5)); +#12977 = LINE('',#12978,#12979); +#12978 = CARTESIAN_POINT('',(1.8,-3.,3.5)); +#12979 = VECTOR('',#12980,1.); +#12980 = DIRECTION('',(-1.,0.,0.)); +#12981 = ORIENTED_EDGE('',*,*,#12982,.F.); +#12982 = EDGE_CURVE('',#12983,#12975,#12985,.T.); +#12983 = VERTEX_POINT('',#12984); +#12984 = CARTESIAN_POINT('',(3.,-1.8,3.5)); +#12985 = LINE('',#12986,#12987); +#12986 = CARTESIAN_POINT('',(3.,-1.8,3.5)); +#12987 = VECTOR('',#12988,1.); +#12988 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#12989 = ORIENTED_EDGE('',*,*,#12990,.F.); +#12990 = EDGE_CURVE('',#12991,#12983,#12993,.T.); +#12991 = VERTEX_POINT('',#12992); +#12992 = CARTESIAN_POINT('',(3.,1.8,3.5)); +#12993 = LINE('',#12994,#12995); +#12994 = CARTESIAN_POINT('',(3.,1.8,3.5)); +#12995 = VECTOR('',#12996,1.); +#12996 = DIRECTION('',(0.,-1.,0.)); +#12997 = ORIENTED_EDGE('',*,*,#12998,.F.); +#12998 = EDGE_CURVE('',#12999,#12991,#13001,.T.); +#12999 = VERTEX_POINT('',#13000); +#13000 = CARTESIAN_POINT('',(1.8,3.,3.5)); +#13001 = LINE('',#13002,#13003); +#13002 = CARTESIAN_POINT('',(1.8,3.,3.5)); +#13003 = VECTOR('',#13004,1.); +#13004 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#13005 = ORIENTED_EDGE('',*,*,#13006,.F.); +#13006 = EDGE_CURVE('',#12943,#12999,#13007,.T.); +#13007 = LINE('',#13008,#13009); +#13008 = CARTESIAN_POINT('',(-1.8,3.,3.5)); +#13009 = VECTOR('',#13010,1.); +#13010 = DIRECTION('',(1.,0.,0.)); +#13011 = ORIENTED_EDGE('',*,*,#12942,.F.); +#13012 = FACE_BOUND('',#13013,.T.); +#13013 = EDGE_LOOP('',(#13014,#13024,#13032,#13040,#13048,#13056,#13064, + #13072)); +#13014 = ORIENTED_EDGE('',*,*,#13015,.T.); +#13015 = EDGE_CURVE('',#13016,#13018,#13020,.T.); +#13016 = VERTEX_POINT('',#13017); +#13017 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,3.5)); +#13018 = VERTEX_POINT('',#13019); +#13019 = CARTESIAN_POINT('',(-1.9,2.5,3.5)); +#13020 = LINE('',#13021,#13022); +#13021 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,3.5)); +#13022 = VECTOR('',#13023,1.); +#13023 = DIRECTION('',(0.707106781206,0.707106781167,0.)); +#13024 = ORIENTED_EDGE('',*,*,#13025,.T.); +#13025 = EDGE_CURVE('',#13018,#13026,#13028,.T.); +#13026 = VERTEX_POINT('',#13027); +#13027 = CARTESIAN_POINT('',(1.9,2.5,3.5)); +#13028 = LINE('',#13029,#13030); +#13029 = CARTESIAN_POINT('',(-1.9,2.5,3.5)); +#13030 = VECTOR('',#13031,1.); +#13031 = DIRECTION('',(1.,0.,0.)); +#13032 = ORIENTED_EDGE('',*,*,#13033,.T.); +#13033 = EDGE_CURVE('',#13026,#13034,#13036,.T.); +#13034 = VERTEX_POINT('',#13035); +#13035 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,3.5)); +#13036 = LINE('',#13037,#13038); +#13037 = CARTESIAN_POINT('',(1.9,2.5,3.5)); +#13038 = VECTOR('',#13039,1.); +#13039 = DIRECTION('',(0.707106781206,-0.707106781167,0.)); +#13040 = ORIENTED_EDGE('',*,*,#13041,.T.); +#13041 = EDGE_CURVE('',#13034,#13042,#13044,.T.); +#13042 = VERTEX_POINT('',#13043); +#13043 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,3.5)); +#13044 = LINE('',#13045,#13046); +#13045 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,3.5)); +#13046 = VECTOR('',#13047,1.); +#13047 = DIRECTION('',(0.,-1.,0.)); +#13048 = ORIENTED_EDGE('',*,*,#13049,.T.); +#13049 = EDGE_CURVE('',#13042,#13050,#13052,.T.); +#13050 = VERTEX_POINT('',#13051); +#13051 = CARTESIAN_POINT('',(1.9,-2.5,3.5)); +#13052 = LINE('',#13053,#13054); +#13053 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,3.5)); +#13054 = VECTOR('',#13055,1.); +#13055 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13056 = ORIENTED_EDGE('',*,*,#13057,.T.); +#13057 = EDGE_CURVE('',#13050,#13058,#13060,.T.); +#13058 = VERTEX_POINT('',#13059); +#13059 = CARTESIAN_POINT('',(-1.9,-2.5,3.5)); +#13060 = LINE('',#13061,#13062); +#13061 = CARTESIAN_POINT('',(1.9,-2.5,3.5)); +#13062 = VECTOR('',#13063,1.); +#13063 = DIRECTION('',(-1.,0.,0.)); +#13064 = ORIENTED_EDGE('',*,*,#13065,.T.); +#13065 = EDGE_CURVE('',#13058,#13066,#13068,.T.); +#13066 = VERTEX_POINT('',#13067); +#13067 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,3.5)); +#13068 = LINE('',#13069,#13070); +#13069 = CARTESIAN_POINT('',(-1.9,-2.5,3.5)); +#13070 = VECTOR('',#13071,1.); +#13071 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#13072 = ORIENTED_EDGE('',*,*,#13073,.T.); +#13073 = EDGE_CURVE('',#13066,#13016,#13074,.T.); +#13074 = LINE('',#13075,#13076); +#13075 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,3.5)); +#13076 = VECTOR('',#13077,1.); +#13077 = DIRECTION('',(0.,1.,0.)); +#13078 = PLANE('',#13079); +#13079 = AXIS2_PLACEMENT_3D('',#13080,#13081,#13082); +#13080 = CARTESIAN_POINT('',(-6.287773625685E-17,3.699306816444E-15,3.5) + ); +#13081 = DIRECTION('',(0.,0.,1.)); +#13082 = DIRECTION('',(1.,0.,-0.)); +#13083 = ADVANCED_FACE('',(#13084),#13095,.T.); +#13084 = FACE_BOUND('',#13085,.T.); +#13085 = EDGE_LOOP('',(#13086,#13092,#13093,#13094)); +#13086 = ORIENTED_EDGE('',*,*,#13087,.T.); +#13087 = EDGE_CURVE('',#12760,#12967,#13088,.T.); +#13088 = LINE('',#13089,#13090); +#13089 = CARTESIAN_POINT('',(-1.8,-3.,0.)); +#13090 = VECTOR('',#13091,1.); +#13091 = DIRECTION('',(0.,0.,1.)); +#13092 = ORIENTED_EDGE('',*,*,#12966,.T.); +#13093 = ORIENTED_EDGE('',*,*,#12696,.F.); +#13094 = ORIENTED_EDGE('',*,*,#12759,.F.); +#13095 = PLANE('',#13096); +#13096 = AXIS2_PLACEMENT_3D('',#13097,#13098,#13099); +#13097 = CARTESIAN_POINT('',(-1.8,-3.,0.)); +#13098 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13099 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#13100 = ADVANCED_FACE('',(#13101),#13107,.F.); +#13101 = FACE_BOUND('',#13102,.F.); +#13102 = EDGE_LOOP('',(#13103,#13104,#13105,#13106)); +#13103 = ORIENTED_EDGE('',*,*,#12926,.T.); +#13104 = ORIENTED_EDGE('',*,*,#12908,.T.); +#13105 = ORIENTED_EDGE('',*,*,#12876,.F.); +#13106 = ORIENTED_EDGE('',*,*,#12854,.F.); +#13107 = PLANE('',#13108); +#13108 = AXIS2_PLACEMENT_3D('',#13109,#13110,#13111); +#13109 = CARTESIAN_POINT('',(-2.,0.7,0.)); +#13110 = DIRECTION('',(1.,0.,0.)); +#13111 = DIRECTION('',(0.,-1.,0.)); +#13112 = ADVANCED_FACE('',(#13113),#13124,.T.); +#13113 = FACE_BOUND('',#13114,.T.); +#13114 = EDGE_LOOP('',(#13115,#13116,#13117,#13123)); +#13115 = ORIENTED_EDGE('',*,*,#12950,.T.); +#13116 = ORIENTED_EDGE('',*,*,#13006,.T.); +#13117 = ORIENTED_EDGE('',*,*,#13118,.F.); +#13118 = EDGE_CURVE('',#12824,#12999,#13119,.T.); +#13119 = LINE('',#13120,#13121); +#13120 = CARTESIAN_POINT('',(1.8,3.,0.)); +#13121 = VECTOR('',#13122,1.); +#13122 = DIRECTION('',(0.,0.,1.)); +#13123 = ORIENTED_EDGE('',*,*,#12831,.F.); +#13124 = PLANE('',#13125); +#13125 = AXIS2_PLACEMENT_3D('',#13126,#13127,#13128); +#13126 = CARTESIAN_POINT('',(-1.8,3.,0.)); +#13127 = DIRECTION('',(0.,1.,0.)); +#13128 = DIRECTION('',(1.,0.,0.)); +#13129 = ADVANCED_FACE('',(#13130),#13141,.T.); +#13130 = FACE_BOUND('',#13131,.T.); +#13131 = EDGE_LOOP('',(#13132,#13133,#13134,#13140)); +#13132 = ORIENTED_EDGE('',*,*,#13118,.T.); +#13133 = ORIENTED_EDGE('',*,*,#12998,.T.); +#13134 = ORIENTED_EDGE('',*,*,#13135,.F.); +#13135 = EDGE_CURVE('',#12816,#12991,#13136,.T.); +#13136 = LINE('',#13137,#13138); +#13137 = CARTESIAN_POINT('',(3.,1.8,0.)); +#13138 = VECTOR('',#13139,1.); +#13139 = DIRECTION('',(0.,0.,1.)); +#13140 = ORIENTED_EDGE('',*,*,#12823,.F.); +#13141 = PLANE('',#13142); +#13142 = AXIS2_PLACEMENT_3D('',#13143,#13144,#13145); +#13143 = CARTESIAN_POINT('',(1.8,3.,0.)); +#13144 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#13145 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#13146 = ADVANCED_FACE('',(#13147),#13181,.T.); +#13147 = FACE_BOUND('',#13148,.T.); +#13148 = EDGE_LOOP('',(#13149,#13150,#13151,#13152,#13158,#13159,#13167, + #13175)); +#13149 = ORIENTED_EDGE('',*,*,#12815,.F.); +#13150 = ORIENTED_EDGE('',*,*,#13135,.T.); +#13151 = ORIENTED_EDGE('',*,*,#12990,.T.); +#13152 = ORIENTED_EDGE('',*,*,#13153,.F.); +#13153 = EDGE_CURVE('',#12776,#12983,#13154,.T.); +#13154 = LINE('',#13155,#13156); +#13155 = CARTESIAN_POINT('',(3.,-1.8,0.)); +#13156 = VECTOR('',#13157,1.); +#13157 = DIRECTION('',(0.,0.,1.)); +#13158 = ORIENTED_EDGE('',*,*,#12783,.F.); +#13159 = ORIENTED_EDGE('',*,*,#13160,.T.); +#13160 = EDGE_CURVE('',#12784,#13161,#13163,.T.); +#13161 = VERTEX_POINT('',#13162); +#13162 = CARTESIAN_POINT('',(3.,-0.7,0.2)); +#13163 = LINE('',#13164,#13165); +#13164 = CARTESIAN_POINT('',(3.,-0.7,0.)); +#13165 = VECTOR('',#13166,1.); +#13166 = DIRECTION('',(0.,0.,1.)); +#13167 = ORIENTED_EDGE('',*,*,#13168,.T.); +#13168 = EDGE_CURVE('',#13161,#13169,#13171,.T.); +#13169 = VERTEX_POINT('',#13170); +#13170 = CARTESIAN_POINT('',(3.,0.7,0.2)); +#13171 = LINE('',#13172,#13173); +#13172 = CARTESIAN_POINT('',(3.,-0.7,0.2)); +#13173 = VECTOR('',#13174,1.); +#13174 = DIRECTION('',(0.,1.,0.)); +#13175 = ORIENTED_EDGE('',*,*,#13176,.F.); +#13176 = EDGE_CURVE('',#12808,#13169,#13177,.T.); +#13177 = LINE('',#13178,#13179); +#13178 = CARTESIAN_POINT('',(3.,0.7,0.)); +#13179 = VECTOR('',#13180,1.); +#13180 = DIRECTION('',(0.,0.,1.)); +#13181 = PLANE('',#13182); +#13182 = AXIS2_PLACEMENT_3D('',#13183,#13184,#13185); +#13183 = CARTESIAN_POINT('',(3.,1.8,0.)); +#13184 = DIRECTION('',(1.,0.,0.)); +#13185 = DIRECTION('',(0.,-1.,0.)); +#13186 = ADVANCED_FACE('',(#13187),#13205,.T.); +#13187 = FACE_BOUND('',#13188,.T.); +#13188 = EDGE_LOOP('',(#13189,#13190,#13198,#13204)); +#13189 = ORIENTED_EDGE('',*,*,#13176,.T.); +#13190 = ORIENTED_EDGE('',*,*,#13191,.T.); +#13191 = EDGE_CURVE('',#13169,#13192,#13194,.T.); +#13192 = VERTEX_POINT('',#13193); +#13193 = CARTESIAN_POINT('',(2.,0.7,0.2)); +#13194 = LINE('',#13195,#13196); +#13195 = CARTESIAN_POINT('',(3.,0.7,0.2)); +#13196 = VECTOR('',#13197,1.); +#13197 = DIRECTION('',(-1.,0.,0.)); +#13198 = ORIENTED_EDGE('',*,*,#13199,.F.); +#13199 = EDGE_CURVE('',#12800,#13192,#13200,.T.); +#13200 = LINE('',#13201,#13202); +#13201 = CARTESIAN_POINT('',(2.,0.7,0.)); +#13202 = VECTOR('',#13203,1.); +#13203 = DIRECTION('',(0.,0.,1.)); +#13204 = ORIENTED_EDGE('',*,*,#12807,.F.); +#13205 = PLANE('',#13206); +#13206 = AXIS2_PLACEMENT_3D('',#13207,#13208,#13209); +#13207 = CARTESIAN_POINT('',(3.,0.7,0.)); +#13208 = DIRECTION('',(0.,-1.,0.)); +#13209 = DIRECTION('',(-1.,0.,0.)); +#13210 = ADVANCED_FACE('',(#13211),#13229,.T.); +#13211 = FACE_BOUND('',#13212,.T.); +#13212 = EDGE_LOOP('',(#13213,#13214,#13222,#13228)); +#13213 = ORIENTED_EDGE('',*,*,#13199,.T.); +#13214 = ORIENTED_EDGE('',*,*,#13215,.T.); +#13215 = EDGE_CURVE('',#13192,#13216,#13218,.T.); +#13216 = VERTEX_POINT('',#13217); +#13217 = CARTESIAN_POINT('',(2.,-0.7,0.2)); +#13218 = LINE('',#13219,#13220); +#13219 = CARTESIAN_POINT('',(2.,0.7,0.2)); +#13220 = VECTOR('',#13221,1.); +#13221 = DIRECTION('',(0.,-1.,0.)); +#13222 = ORIENTED_EDGE('',*,*,#13223,.F.); +#13223 = EDGE_CURVE('',#12792,#13216,#13224,.T.); +#13224 = LINE('',#13225,#13226); +#13225 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#13226 = VECTOR('',#13227,1.); +#13227 = DIRECTION('',(0.,0.,1.)); +#13228 = ORIENTED_EDGE('',*,*,#12799,.F.); +#13229 = PLANE('',#13230); +#13230 = AXIS2_PLACEMENT_3D('',#13231,#13232,#13233); +#13231 = CARTESIAN_POINT('',(2.,0.7,0.)); +#13232 = DIRECTION('',(1.,0.,0.)); +#13233 = DIRECTION('',(0.,-1.,0.)); +#13234 = ADVANCED_FACE('',(#13235),#13246,.T.); +#13235 = FACE_BOUND('',#13236,.T.); +#13236 = EDGE_LOOP('',(#13237,#13238,#13244,#13245)); +#13237 = ORIENTED_EDGE('',*,*,#13223,.T.); +#13238 = ORIENTED_EDGE('',*,*,#13239,.T.); +#13239 = EDGE_CURVE('',#13216,#13161,#13240,.T.); +#13240 = LINE('',#13241,#13242); +#13241 = CARTESIAN_POINT('',(2.,-0.7,0.2)); +#13242 = VECTOR('',#13243,1.); +#13243 = DIRECTION('',(1.,0.,0.)); +#13244 = ORIENTED_EDGE('',*,*,#13160,.F.); +#13245 = ORIENTED_EDGE('',*,*,#12791,.F.); +#13246 = PLANE('',#13247); +#13247 = AXIS2_PLACEMENT_3D('',#13248,#13249,#13250); +#13248 = CARTESIAN_POINT('',(2.,-0.7,0.)); +#13249 = DIRECTION('',(0.,1.,0.)); +#13250 = DIRECTION('',(1.,0.,0.)); +#13251 = ADVANCED_FACE('',(#13252),#13263,.T.); +#13252 = FACE_BOUND('',#13253,.T.); +#13253 = EDGE_LOOP('',(#13254,#13255,#13256,#13262)); +#13254 = ORIENTED_EDGE('',*,*,#13153,.T.); +#13255 = ORIENTED_EDGE('',*,*,#12982,.T.); +#13256 = ORIENTED_EDGE('',*,*,#13257,.F.); +#13257 = EDGE_CURVE('',#12768,#12975,#13258,.T.); +#13258 = LINE('',#13259,#13260); +#13259 = CARTESIAN_POINT('',(1.8,-3.,0.)); +#13260 = VECTOR('',#13261,1.); +#13261 = DIRECTION('',(0.,0.,1.)); +#13262 = ORIENTED_EDGE('',*,*,#12775,.F.); +#13263 = PLANE('',#13264); +#13264 = AXIS2_PLACEMENT_3D('',#13265,#13266,#13267); +#13265 = CARTESIAN_POINT('',(3.,-1.8,0.)); +#13266 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#13267 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13268 = ADVANCED_FACE('',(#13269),#13275,.T.); +#13269 = FACE_BOUND('',#13270,.T.); +#13270 = EDGE_LOOP('',(#13271,#13272,#13273,#13274)); +#13271 = ORIENTED_EDGE('',*,*,#13257,.T.); +#13272 = ORIENTED_EDGE('',*,*,#12974,.T.); +#13273 = ORIENTED_EDGE('',*,*,#13087,.F.); +#13274 = ORIENTED_EDGE('',*,*,#12767,.F.); +#13275 = PLANE('',#13276); +#13276 = AXIS2_PLACEMENT_3D('',#13277,#13278,#13279); +#13277 = CARTESIAN_POINT('',(1.8,-3.,0.)); +#13278 = DIRECTION('',(0.,-1.,0.)); +#13279 = DIRECTION('',(-1.,0.,0.)); +#13280 = ADVANCED_FACE('',(#13281),#13306,.T.); +#13281 = FACE_BOUND('',#13282,.T.); +#13282 = EDGE_LOOP('',(#13283,#13291,#13299,#13305)); +#13283 = ORIENTED_EDGE('',*,*,#13284,.T.); +#13284 = EDGE_CURVE('',#13016,#13285,#13287,.T.); +#13285 = VERTEX_POINT('',#13286); +#13286 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,4.5)); +#13287 = LINE('',#13288,#13289); +#13288 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,3.5)); +#13289 = VECTOR('',#13290,1.); +#13290 = DIRECTION('',(0.,0.,1.)); +#13291 = ORIENTED_EDGE('',*,*,#13292,.T.); +#13292 = EDGE_CURVE('',#13285,#13293,#13295,.T.); +#13293 = VERTEX_POINT('',#13294); +#13294 = CARTESIAN_POINT('',(-1.9,2.5,4.5)); +#13295 = LINE('',#13296,#13297); +#13296 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,4.5)); +#13297 = VECTOR('',#13298,1.); +#13298 = DIRECTION('',(0.707106781206,0.707106781167,0.)); +#13299 = ORIENTED_EDGE('',*,*,#13300,.F.); +#13300 = EDGE_CURVE('',#13018,#13293,#13301,.T.); +#13301 = LINE('',#13302,#13303); +#13302 = CARTESIAN_POINT('',(-1.9,2.5,3.5)); +#13303 = VECTOR('',#13304,1.); +#13304 = DIRECTION('',(0.,0.,1.)); +#13305 = ORIENTED_EDGE('',*,*,#13015,.F.); +#13306 = PLANE('',#13307); +#13307 = AXIS2_PLACEMENT_3D('',#13308,#13309,#13310); +#13308 = CARTESIAN_POINT('',(-2.500000000017,1.900000000017,3.5)); +#13309 = DIRECTION('',(-0.707106781167,0.707106781206,0.)); +#13310 = DIRECTION('',(0.707106781206,0.707106781167,0.)); +#13311 = ADVANCED_FACE('',(#13312),#13330,.T.); +#13312 = FACE_BOUND('',#13313,.T.); +#13313 = EDGE_LOOP('',(#13314,#13322,#13328,#13329)); +#13314 = ORIENTED_EDGE('',*,*,#13315,.T.); +#13315 = EDGE_CURVE('',#13066,#13316,#13318,.T.); +#13316 = VERTEX_POINT('',#13317); +#13317 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,4.5)); +#13318 = LINE('',#13319,#13320); +#13319 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,3.5)); +#13320 = VECTOR('',#13321,1.); +#13321 = DIRECTION('',(0.,0.,1.)); +#13322 = ORIENTED_EDGE('',*,*,#13323,.T.); +#13323 = EDGE_CURVE('',#13316,#13285,#13324,.T.); +#13324 = LINE('',#13325,#13326); +#13325 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,4.5)); +#13326 = VECTOR('',#13327,1.); +#13327 = DIRECTION('',(0.,1.,0.)); +#13328 = ORIENTED_EDGE('',*,*,#13284,.F.); +#13329 = ORIENTED_EDGE('',*,*,#13073,.F.); +#13330 = PLANE('',#13331); +#13331 = AXIS2_PLACEMENT_3D('',#13332,#13333,#13334); +#13332 = CARTESIAN_POINT('',(-2.500000000017,-1.899999999983,3.5)); +#13333 = DIRECTION('',(-1.,0.,0.)); +#13334 = DIRECTION('',(0.,1.,0.)); +#13335 = ADVANCED_FACE('',(#13336),#13354,.T.); +#13336 = FACE_BOUND('',#13337,.T.); +#13337 = EDGE_LOOP('',(#13338,#13346,#13352,#13353)); +#13338 = ORIENTED_EDGE('',*,*,#13339,.T.); +#13339 = EDGE_CURVE('',#13058,#13340,#13342,.T.); +#13340 = VERTEX_POINT('',#13341); +#13341 = CARTESIAN_POINT('',(-1.9,-2.5,4.5)); +#13342 = LINE('',#13343,#13344); +#13343 = CARTESIAN_POINT('',(-1.9,-2.5,3.5)); +#13344 = VECTOR('',#13345,1.); +#13345 = DIRECTION('',(0.,0.,1.)); +#13346 = ORIENTED_EDGE('',*,*,#13347,.T.); +#13347 = EDGE_CURVE('',#13340,#13316,#13348,.T.); +#13348 = LINE('',#13349,#13350); +#13349 = CARTESIAN_POINT('',(-1.9,-2.5,4.5)); +#13350 = VECTOR('',#13351,1.); +#13351 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#13352 = ORIENTED_EDGE('',*,*,#13315,.F.); +#13353 = ORIENTED_EDGE('',*,*,#13065,.F.); +#13354 = PLANE('',#13355); +#13355 = AXIS2_PLACEMENT_3D('',#13356,#13357,#13358); +#13356 = CARTESIAN_POINT('',(-1.9,-2.5,3.5)); +#13357 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13358 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#13359 = ADVANCED_FACE('',(#13360),#13378,.T.); +#13360 = FACE_BOUND('',#13361,.T.); +#13361 = EDGE_LOOP('',(#13362,#13370,#13376,#13377)); +#13362 = ORIENTED_EDGE('',*,*,#13363,.T.); +#13363 = EDGE_CURVE('',#13050,#13364,#13366,.T.); +#13364 = VERTEX_POINT('',#13365); +#13365 = CARTESIAN_POINT('',(1.9,-2.5,4.5)); +#13366 = LINE('',#13367,#13368); +#13367 = CARTESIAN_POINT('',(1.9,-2.5,3.5)); +#13368 = VECTOR('',#13369,1.); +#13369 = DIRECTION('',(0.,0.,1.)); +#13370 = ORIENTED_EDGE('',*,*,#13371,.T.); +#13371 = EDGE_CURVE('',#13364,#13340,#13372,.T.); +#13372 = LINE('',#13373,#13374); +#13373 = CARTESIAN_POINT('',(1.9,-2.5,4.5)); +#13374 = VECTOR('',#13375,1.); +#13375 = DIRECTION('',(-1.,0.,0.)); +#13376 = ORIENTED_EDGE('',*,*,#13339,.F.); +#13377 = ORIENTED_EDGE('',*,*,#13057,.F.); +#13378 = PLANE('',#13379); +#13379 = AXIS2_PLACEMENT_3D('',#13380,#13381,#13382); +#13380 = CARTESIAN_POINT('',(1.9,-2.5,3.5)); +#13381 = DIRECTION('',(0.,-1.,0.)); +#13382 = DIRECTION('',(-1.,0.,0.)); +#13383 = ADVANCED_FACE('',(#13384),#13402,.T.); +#13384 = FACE_BOUND('',#13385,.T.); +#13385 = EDGE_LOOP('',(#13386,#13394,#13400,#13401)); +#13386 = ORIENTED_EDGE('',*,*,#13387,.T.); +#13387 = EDGE_CURVE('',#13042,#13388,#13390,.T.); +#13388 = VERTEX_POINT('',#13389); +#13389 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,4.5)); +#13390 = LINE('',#13391,#13392); +#13391 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,3.5)); +#13392 = VECTOR('',#13393,1.); +#13393 = DIRECTION('',(0.,0.,1.)); +#13394 = ORIENTED_EDGE('',*,*,#13395,.T.); +#13395 = EDGE_CURVE('',#13388,#13364,#13396,.T.); +#13396 = LINE('',#13397,#13398); +#13397 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,4.5)); +#13398 = VECTOR('',#13399,1.); +#13399 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13400 = ORIENTED_EDGE('',*,*,#13363,.F.); +#13401 = ORIENTED_EDGE('',*,*,#13049,.F.); +#13402 = PLANE('',#13403); +#13403 = AXIS2_PLACEMENT_3D('',#13404,#13405,#13406); +#13404 = CARTESIAN_POINT('',(2.500000000017,-1.899999999983,3.5)); +#13405 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#13406 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#13407 = ADVANCED_FACE('',(#13408),#13426,.T.); +#13408 = FACE_BOUND('',#13409,.T.); +#13409 = EDGE_LOOP('',(#13410,#13418,#13424,#13425)); +#13410 = ORIENTED_EDGE('',*,*,#13411,.T.); +#13411 = EDGE_CURVE('',#13034,#13412,#13414,.T.); +#13412 = VERTEX_POINT('',#13413); +#13413 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,4.5)); +#13414 = LINE('',#13415,#13416); +#13415 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,3.5)); +#13416 = VECTOR('',#13417,1.); +#13417 = DIRECTION('',(0.,0.,1.)); +#13418 = ORIENTED_EDGE('',*,*,#13419,.T.); +#13419 = EDGE_CURVE('',#13412,#13388,#13420,.T.); +#13420 = LINE('',#13421,#13422); +#13421 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,4.5)); +#13422 = VECTOR('',#13423,1.); +#13423 = DIRECTION('',(0.,-1.,0.)); +#13424 = ORIENTED_EDGE('',*,*,#13387,.F.); +#13425 = ORIENTED_EDGE('',*,*,#13041,.F.); +#13426 = PLANE('',#13427); +#13427 = AXIS2_PLACEMENT_3D('',#13428,#13429,#13430); +#13428 = CARTESIAN_POINT('',(2.500000000017,1.900000000017,3.5)); +#13429 = DIRECTION('',(1.,0.,0.)); +#13430 = DIRECTION('',(0.,-1.,0.)); +#13431 = ADVANCED_FACE('',(#13432),#13450,.T.); +#13432 = FACE_BOUND('',#13433,.T.); +#13433 = EDGE_LOOP('',(#13434,#13442,#13448,#13449)); +#13434 = ORIENTED_EDGE('',*,*,#13435,.T.); +#13435 = EDGE_CURVE('',#13026,#13436,#13438,.T.); +#13436 = VERTEX_POINT('',#13437); +#13437 = CARTESIAN_POINT('',(1.9,2.5,4.5)); +#13438 = LINE('',#13439,#13440); +#13439 = CARTESIAN_POINT('',(1.9,2.5,3.5)); +#13440 = VECTOR('',#13441,1.); +#13441 = DIRECTION('',(0.,0.,1.)); +#13442 = ORIENTED_EDGE('',*,*,#13443,.T.); +#13443 = EDGE_CURVE('',#13436,#13412,#13444,.T.); +#13444 = LINE('',#13445,#13446); +#13445 = CARTESIAN_POINT('',(1.9,2.5,4.5)); +#13446 = VECTOR('',#13447,1.); +#13447 = DIRECTION('',(0.707106781206,-0.707106781167,0.)); +#13448 = ORIENTED_EDGE('',*,*,#13411,.F.); +#13449 = ORIENTED_EDGE('',*,*,#13033,.F.); +#13450 = PLANE('',#13451); +#13451 = AXIS2_PLACEMENT_3D('',#13452,#13453,#13454); +#13452 = CARTESIAN_POINT('',(1.9,2.5,3.5)); +#13453 = DIRECTION('',(0.707106781167,0.707106781206,0.)); +#13454 = DIRECTION('',(0.707106781206,-0.707106781167,0.)); +#13455 = ADVANCED_FACE('',(#13456),#13467,.T.); +#13456 = FACE_BOUND('',#13457,.T.); +#13457 = EDGE_LOOP('',(#13458,#13459,#13465,#13466)); +#13458 = ORIENTED_EDGE('',*,*,#13300,.T.); +#13459 = ORIENTED_EDGE('',*,*,#13460,.T.); +#13460 = EDGE_CURVE('',#13293,#13436,#13461,.T.); +#13461 = LINE('',#13462,#13463); +#13462 = CARTESIAN_POINT('',(-1.9,2.5,4.5)); +#13463 = VECTOR('',#13464,1.); +#13464 = DIRECTION('',(1.,0.,0.)); +#13465 = ORIENTED_EDGE('',*,*,#13435,.F.); +#13466 = ORIENTED_EDGE('',*,*,#13025,.F.); +#13467 = PLANE('',#13468); +#13468 = AXIS2_PLACEMENT_3D('',#13469,#13470,#13471); +#13469 = CARTESIAN_POINT('',(-1.9,2.5,3.5)); +#13470 = DIRECTION('',(0.,1.,0.)); +#13471 = DIRECTION('',(1.,0.,0.)); +#13472 = ADVANCED_FACE('',(#13473),#13479,.F.); +#13473 = FACE_BOUND('',#13474,.F.); +#13474 = EDGE_LOOP('',(#13475,#13476,#13477,#13478)); +#13475 = ORIENTED_EDGE('',*,*,#13191,.T.); +#13476 = ORIENTED_EDGE('',*,*,#13215,.T.); +#13477 = ORIENTED_EDGE('',*,*,#13239,.T.); +#13478 = ORIENTED_EDGE('',*,*,#13168,.T.); +#13479 = PLANE('',#13480); +#13480 = AXIS2_PLACEMENT_3D('',#13481,#13482,#13483); +#13481 = CARTESIAN_POINT('',(1.850371707709E-16,0.,0.2)); +#13482 = DIRECTION('',(0.,0.,1.)); +#13483 = DIRECTION('',(1.,0.,-0.)); +#13484 = ADVANCED_FACE('',(#13485,#13495),#13506,.T.); +#13485 = FACE_BOUND('',#13486,.T.); +#13486 = EDGE_LOOP('',(#13487,#13488,#13489,#13490,#13491,#13492,#13493, + #13494)); +#13487 = ORIENTED_EDGE('',*,*,#13460,.F.); +#13488 = ORIENTED_EDGE('',*,*,#13292,.F.); +#13489 = ORIENTED_EDGE('',*,*,#13323,.F.); +#13490 = ORIENTED_EDGE('',*,*,#13347,.F.); +#13491 = ORIENTED_EDGE('',*,*,#13371,.F.); +#13492 = ORIENTED_EDGE('',*,*,#13395,.F.); +#13493 = ORIENTED_EDGE('',*,*,#13419,.F.); +#13494 = ORIENTED_EDGE('',*,*,#13443,.F.); +#13495 = FACE_BOUND('',#13496,.T.); +#13496 = EDGE_LOOP('',(#13497)); +#13497 = ORIENTED_EDGE('',*,*,#13498,.F.); +#13498 = EDGE_CURVE('',#13499,#13499,#13501,.T.); +#13499 = VERTEX_POINT('',#13500); +#13500 = CARTESIAN_POINT('',(2.25,0.,4.5)); +#13501 = CIRCLE('',#13502,2.25); +#13502 = AXIS2_PLACEMENT_3D('',#13503,#13504,#13505); +#13503 = CARTESIAN_POINT('',(0.,0.,4.5)); +#13504 = DIRECTION('',(0.,0.,1.)); +#13505 = DIRECTION('',(1.,0.,-0.)); +#13506 = PLANE('',#13507); +#13507 = AXIS2_PLACEMENT_3D('',#13508,#13509,#13510); +#13508 = CARTESIAN_POINT('',(1.015041259331E-16,2.775767652751E-12,4.5) + ); +#13509 = DIRECTION('',(4.087630853375E-33,-8.175261706819E-33,1.)); +#13510 = DIRECTION('',(-1.140350817636E-81,1.,8.175261706819E-33)); +#13511 = ADVANCED_FACE('',(#13512),#13531,.T.); +#13512 = FACE_BOUND('',#13513,.T.); +#13513 = EDGE_LOOP('',(#13514,#13515,#13523,#13530)); +#13514 = ORIENTED_EDGE('',*,*,#13498,.T.); +#13515 = ORIENTED_EDGE('',*,*,#13516,.T.); +#13516 = EDGE_CURVE('',#13499,#13517,#13519,.T.); +#13517 = VERTEX_POINT('',#13518); +#13518 = CARTESIAN_POINT('',(2.25,0.,5.)); +#13519 = LINE('',#13520,#13521); +#13520 = CARTESIAN_POINT('',(2.25,0.,4.5)); +#13521 = VECTOR('',#13522,1.); +#13522 = DIRECTION('',(0.,0.,1.)); +#13523 = ORIENTED_EDGE('',*,*,#13524,.F.); +#13524 = EDGE_CURVE('',#13517,#13517,#13525,.T.); +#13525 = CIRCLE('',#13526,2.25); +#13526 = AXIS2_PLACEMENT_3D('',#13527,#13528,#13529); +#13527 = CARTESIAN_POINT('',(0.,0.,5.)); +#13528 = DIRECTION('',(0.,0.,1.)); +#13529 = DIRECTION('',(1.,0.,-0.)); +#13530 = ORIENTED_EDGE('',*,*,#13516,.F.); +#13531 = CYLINDRICAL_SURFACE('',#13532,2.25); +#13532 = AXIS2_PLACEMENT_3D('',#13533,#13534,#13535); +#13533 = CARTESIAN_POINT('',(0.,0.,4.5)); +#13534 = DIRECTION('',(-0.,-0.,-1.)); +#13535 = DIRECTION('',(1.,0.,0.)); +#13536 = ADVANCED_FACE('',(#13537),#13540,.T.); +#13537 = FACE_BOUND('',#13538,.T.); +#13538 = EDGE_LOOP('',(#13539)); +#13539 = ORIENTED_EDGE('',*,*,#13524,.T.); +#13540 = PLANE('',#13541); +#13541 = AXIS2_PLACEMENT_3D('',#13542,#13543,#13544); +#13542 = CARTESIAN_POINT('',(-7.596889625219E-17,6.008928256833E-17,5.) + ); +#13543 = DIRECTION('',(0.,0.,1.)); +#13544 = DIRECTION('',(1.,0.,-0.)); +#13545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#13549)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#13546,#13547,#13548)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#13546 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#13547 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#13548 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#13549 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#13546, + 'distance_accuracy_value','confusion accuracy'); +#13550 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#13551,#13553); +#13551 = ( REPRESENTATION_RELATIONSHIP('','',#12679,#12178) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#13552) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#13552 = ITEM_DEFINED_TRANSFORMATION('','',#11,#12187); +#13553 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #13554); +#13554 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','Body','',#12173,#12674,$); +#13555 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#12676)); +#13556 = SHAPE_DEFINITION_REPRESENTATION(#13557,#13563); +#13557 = PRODUCT_DEFINITION_SHAPE('','',#13558); +#13558 = PRODUCT_DEFINITION('design','',#13559,#13562); +#13559 = PRODUCT_DEFINITION_FORMATION('','',#13560); +#13560 = PRODUCT('SW_Alps_SKRTLAE010','SW_Alps_SKRTLAE010','',(#13561)); +#13561 = PRODUCT_CONTEXT('',#2,'mechanical'); +#13562 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#13563 = SHAPE_REPRESENTATION('',(#11,#13564),#13568); +#13564 = AXIS2_PLACEMENT_3D('',#13565,#13566,#13567); +#13565 = CARTESIAN_POINT('',(0.,0.,0.)); +#13566 = DIRECTION('',(0.,0.,1.)); +#13567 = DIRECTION('',(1.,0.,-0.)); +#13568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#13572)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#13569,#13570,#13571)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#13569 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#13570 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#13571 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#13572 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#13569, + 'distance_accuracy_value','confusion accuracy'); +#13573 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#13574,#13576); +#13574 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#13575) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#13575 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#13576 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #13577); +#13577 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','SW_TRIG_DIG2','',#5,#13558 + ,$); +#13578 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#13560)); +#13579 = SHAPE_DEFINITION_REPRESENTATION(#13580,#13586); +#13580 = PRODUCT_DEFINITION_SHAPE('','',#13581); +#13581 = PRODUCT_DEFINITION('design','',#13582,#13585); +#13582 = PRODUCT_DEFINITION_FORMATION('','',#13583); +#13583 = PRODUCT('KEY-SMD_L4.6-W3.4-H3.4','KEY-SMD_L4.6-W3.4-H3.4','',( + #13584)); +#13584 = PRODUCT_CONTEXT('',#2,'mechanical'); +#13585 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#13586 = SHAPE_REPRESENTATION('',(#11,#13587,#19152),#31587); +#13587 = MANIFOLD_SOLID_BREP('',#13588); +#13588 = CLOSED_SHELL('',(#13589,#13640,#13691,#13723,#13755,#13799, + #13837,#13879,#13921,#13963,#14613,#14897,#14928,#14952,#14976, + #15007,#15031,#15055,#15086,#15110,#15134,#15165,#15189,#15213, + #15245,#15269,#15294,#15311,#15353,#15457,#15485,#15513,#15534, + #15592,#15632,#15663,#15694,#15725,#15756,#15821,#15847,#15869, + #15883,#15897,#15915,#15925,#15943,#15953,#15971,#15981,#16023, + #16065,#16089,#16113,#16130,#16166,#16183,#16200,#16217,#16234, + #16256,#16274,#16291,#16304,#16316,#16340,#16364,#16381,#16423, + #16465,#16501,#16518,#16535,#16552,#16569,#16591,#16609,#16626, + #16639,#16651,#16675,#16699,#16716,#16758,#16800,#16836,#16853, + #16870,#16887,#16904,#16926,#16944,#16961,#16974,#16986,#16998, + #17014,#17026,#17057,#17081,#17105,#17129,#17153,#17177,#17201, + #17218,#17292,#17323,#17347,#17385,#17409,#17447,#17464,#17495, + #17519,#17543,#17617,#17684,#17771,#17802,#17876,#17950,#17974, + #17991,#18022,#18046,#18070,#18094,#18118,#18142,#18166,#18190, + #18214,#18238,#18262,#18279,#18299,#18330,#18380,#18454,#18528, + #18578,#18602,#18652,#18726,#18800,#18843,#18861,#18892,#18916, + #18940,#18964,#18988,#19005,#19019,#19033,#19046,#19064,#19080, + #19098,#19114,#19133)); +#13589 = ADVANCED_FACE('',(#13590),#13628,.T.); +#13590 = FACE_BOUND('',#13591,.T.); +#13591 = EDGE_LOOP('',(#13592,#13603,#13612,#13621)); +#13592 = ORIENTED_EDGE('',*,*,#13593,.F.); +#13593 = EDGE_CURVE('',#13594,#13596,#13598,.T.); +#13594 = VERTEX_POINT('',#13595); +#13595 = CARTESIAN_POINT('',(-1.59,-1.2,3.1)); +#13596 = VERTEX_POINT('',#13597); +#13597 = CARTESIAN_POINT('',(-1.59,-1.2,2.6)); +#13598 = CIRCLE('',#13599,0.25); +#13599 = AXIS2_PLACEMENT_3D('',#13600,#13601,#13602); +#13600 = CARTESIAN_POINT('',(-1.59,-1.2,2.85)); +#13601 = DIRECTION('',(-0.,1.,0.)); +#13602 = DIRECTION('',(0.,0.,-1.)); +#13603 = ORIENTED_EDGE('',*,*,#13604,.T.); +#13604 = EDGE_CURVE('',#13594,#13605,#13607,.T.); +#13605 = VERTEX_POINT('',#13606); +#13606 = CARTESIAN_POINT('',(-1.59,-1.35,2.95)); +#13607 = CIRCLE('',#13608,0.15); +#13608 = AXIS2_PLACEMENT_3D('',#13609,#13610,#13611); +#13609 = CARTESIAN_POINT('',(-1.59,-1.2,2.95)); +#13610 = DIRECTION('',(1.,0.,-1.224646799147E-16)); +#13611 = DIRECTION('',(-1.224646799147E-16,-0.,-1.)); +#13612 = ORIENTED_EDGE('',*,*,#13613,.F.); +#13613 = EDGE_CURVE('',#13614,#13605,#13616,.T.); +#13614 = VERTEX_POINT('',#13615); +#13615 = CARTESIAN_POINT('',(-1.59,-1.35,2.75)); +#13616 = CIRCLE('',#13617,1.E-01); +#13617 = AXIS2_PLACEMENT_3D('',#13618,#13619,#13620); +#13618 = CARTESIAN_POINT('',(-1.59,-1.35,2.85)); +#13619 = DIRECTION('',(0.,-1.,0.)); +#13620 = DIRECTION('',(0.,0.,-1.)); +#13621 = ORIENTED_EDGE('',*,*,#13622,.F.); +#13622 = EDGE_CURVE('',#13596,#13614,#13623,.T.); +#13623 = CIRCLE('',#13624,0.15); +#13624 = AXIS2_PLACEMENT_3D('',#13625,#13626,#13627); +#13625 = CARTESIAN_POINT('',(-1.59,-1.2,2.75)); +#13626 = DIRECTION('',(-1.,0.,-0.)); +#13627 = DIRECTION('',(-0.,0.,1.)); +#13628 = SURFACE_OF_REVOLUTION('',#13629,#13637); +#13629 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#13630,#13631,#13632,#13633, + #13634,#13635,#13636),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#13630 = CARTESIAN_POINT('',(-1.59,-1.2,2.6)); +#13631 = CARTESIAN_POINT('',(-1.59,-1.23926990817,2.6)); +#13632 = CARTESIAN_POINT('',(-1.59,-1.278536475106,2.612334152903)); +#13633 = CARTESIAN_POINT('',(-1.59,-1.312978522446,2.637021477554)); +#13634 = CARTESIAN_POINT('',(-1.59,-1.337665847097,2.671463524894)); +#13635 = CARTESIAN_POINT('',(-1.59,-1.35,2.71073009183)); +#13636 = CARTESIAN_POINT('',(-1.59,-1.35,2.75)); +#13637 = AXIS1_PLACEMENT('',#13638,#13639); +#13638 = CARTESIAN_POINT('',(-1.59,-1.2,2.85)); +#13639 = DIRECTION('',(0.,-1.,0.)); +#13640 = ADVANCED_FACE('',(#13641),#13679,.T.); +#13641 = FACE_BOUND('',#13642,.T.); +#13642 = EDGE_LOOP('',(#13643,#13654,#13663,#13672)); +#13643 = ORIENTED_EDGE('',*,*,#13644,.F.); +#13644 = EDGE_CURVE('',#13645,#13647,#13649,.T.); +#13645 = VERTEX_POINT('',#13646); +#13646 = CARTESIAN_POINT('',(1.59,-1.2,3.1)); +#13647 = VERTEX_POINT('',#13648); +#13648 = CARTESIAN_POINT('',(1.59,-1.2,2.6)); +#13649 = CIRCLE('',#13650,0.25); +#13650 = AXIS2_PLACEMENT_3D('',#13651,#13652,#13653); +#13651 = CARTESIAN_POINT('',(1.59,-1.2,2.85)); +#13652 = DIRECTION('',(-0.,1.,0.)); +#13653 = DIRECTION('',(0.,0.,-1.)); +#13654 = ORIENTED_EDGE('',*,*,#13655,.T.); +#13655 = EDGE_CURVE('',#13645,#13656,#13658,.T.); +#13656 = VERTEX_POINT('',#13657); +#13657 = CARTESIAN_POINT('',(1.59,-1.35,2.95)); +#13658 = CIRCLE('',#13659,0.15); +#13659 = AXIS2_PLACEMENT_3D('',#13660,#13661,#13662); +#13660 = CARTESIAN_POINT('',(1.59,-1.2,2.95)); +#13661 = DIRECTION('',(1.,0.,-1.224646799147E-16)); +#13662 = DIRECTION('',(-1.224646799147E-16,-0.,-1.)); +#13663 = ORIENTED_EDGE('',*,*,#13664,.F.); +#13664 = EDGE_CURVE('',#13665,#13656,#13667,.T.); +#13665 = VERTEX_POINT('',#13666); +#13666 = CARTESIAN_POINT('',(1.59,-1.35,2.75)); +#13667 = CIRCLE('',#13668,1.E-01); +#13668 = AXIS2_PLACEMENT_3D('',#13669,#13670,#13671); +#13669 = CARTESIAN_POINT('',(1.59,-1.35,2.85)); +#13670 = DIRECTION('',(0.,-1.,0.)); +#13671 = DIRECTION('',(0.,0.,-1.)); +#13672 = ORIENTED_EDGE('',*,*,#13673,.F.); +#13673 = EDGE_CURVE('',#13647,#13665,#13674,.T.); +#13674 = CIRCLE('',#13675,0.15); +#13675 = AXIS2_PLACEMENT_3D('',#13676,#13677,#13678); +#13676 = CARTESIAN_POINT('',(1.59,-1.2,2.75)); +#13677 = DIRECTION('',(-1.,0.,-0.)); +#13678 = DIRECTION('',(-0.,0.,1.)); +#13679 = SURFACE_OF_REVOLUTION('',#13680,#13688); +#13680 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#13681,#13682,#13683,#13684, + #13685,#13686,#13687),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#13681 = CARTESIAN_POINT('',(1.59,-1.2,2.6)); +#13682 = CARTESIAN_POINT('',(1.59,-1.23926990817,2.6)); +#13683 = CARTESIAN_POINT('',(1.59,-1.278536475106,2.612334152903)); +#13684 = CARTESIAN_POINT('',(1.59,-1.312978522446,2.637021477554)); +#13685 = CARTESIAN_POINT('',(1.59,-1.337665847097,2.671463524894)); +#13686 = CARTESIAN_POINT('',(1.59,-1.35,2.71073009183)); +#13687 = CARTESIAN_POINT('',(1.59,-1.35,2.75)); +#13688 = AXIS1_PLACEMENT('',#13689,#13690); +#13689 = CARTESIAN_POINT('',(1.59,-1.2,2.85)); +#13690 = DIRECTION('',(0.,-1.,0.)); +#13691 = ADVANCED_FACE('',(#13692),#13718,.T.); +#13692 = FACE_BOUND('',#13693,.T.); +#13693 = EDGE_LOOP('',(#13694,#13695,#13703,#13712)); +#13694 = ORIENTED_EDGE('',*,*,#13644,.T.); +#13695 = ORIENTED_EDGE('',*,*,#13696,.T.); +#13696 = EDGE_CURVE('',#13647,#13697,#13699,.T.); +#13697 = VERTEX_POINT('',#13698); +#13698 = CARTESIAN_POINT('',(1.59,-1.05,2.6)); +#13699 = LINE('',#13700,#13701); +#13700 = CARTESIAN_POINT('',(1.59,-1.35,2.6)); +#13701 = VECTOR('',#13702,1.); +#13702 = DIRECTION('',(-0.,1.,-0.)); +#13703 = ORIENTED_EDGE('',*,*,#13704,.T.); +#13704 = EDGE_CURVE('',#13697,#13705,#13707,.T.); +#13705 = VERTEX_POINT('',#13706); +#13706 = CARTESIAN_POINT('',(1.59,-1.05,3.1)); +#13707 = CIRCLE('',#13708,0.25); +#13708 = AXIS2_PLACEMENT_3D('',#13709,#13710,#13711); +#13709 = CARTESIAN_POINT('',(1.59,-1.05,2.85)); +#13710 = DIRECTION('',(0.,-1.,0.)); +#13711 = DIRECTION('',(0.,0.,1.)); +#13712 = ORIENTED_EDGE('',*,*,#13713,.F.); +#13713 = EDGE_CURVE('',#13645,#13705,#13714,.T.); +#13714 = LINE('',#13715,#13716); +#13715 = CARTESIAN_POINT('',(1.59,-1.35,3.1)); +#13716 = VECTOR('',#13717,1.); +#13717 = DIRECTION('',(-0.,1.,-0.)); +#13718 = CYLINDRICAL_SURFACE('',#13719,0.25); +#13719 = AXIS2_PLACEMENT_3D('',#13720,#13721,#13722); +#13720 = CARTESIAN_POINT('',(1.59,-1.35,2.85)); +#13721 = DIRECTION('',(-0.,1.,-0.)); +#13722 = DIRECTION('',(0.,0.,1.)); +#13723 = ADVANCED_FACE('',(#13724),#13750,.T.); +#13724 = FACE_BOUND('',#13725,.T.); +#13725 = EDGE_LOOP('',(#13726,#13727,#13735,#13744)); +#13726 = ORIENTED_EDGE('',*,*,#13593,.T.); +#13727 = ORIENTED_EDGE('',*,*,#13728,.T.); +#13728 = EDGE_CURVE('',#13596,#13729,#13731,.T.); +#13729 = VERTEX_POINT('',#13730); +#13730 = CARTESIAN_POINT('',(-1.59,-1.05,2.6)); +#13731 = LINE('',#13732,#13733); +#13732 = CARTESIAN_POINT('',(-1.59,-1.35,2.6)); +#13733 = VECTOR('',#13734,1.); +#13734 = DIRECTION('',(-0.,1.,-0.)); +#13735 = ORIENTED_EDGE('',*,*,#13736,.T.); +#13736 = EDGE_CURVE('',#13729,#13737,#13739,.T.); +#13737 = VERTEX_POINT('',#13738); +#13738 = CARTESIAN_POINT('',(-1.59,-1.05,3.1)); +#13739 = CIRCLE('',#13740,0.25); +#13740 = AXIS2_PLACEMENT_3D('',#13741,#13742,#13743); +#13741 = CARTESIAN_POINT('',(-1.59,-1.05,2.85)); +#13742 = DIRECTION('',(0.,-1.,0.)); +#13743 = DIRECTION('',(0.,0.,1.)); +#13744 = ORIENTED_EDGE('',*,*,#13745,.F.); +#13745 = EDGE_CURVE('',#13594,#13737,#13746,.T.); +#13746 = LINE('',#13747,#13748); +#13747 = CARTESIAN_POINT('',(-1.59,-1.35,3.1)); +#13748 = VECTOR('',#13749,1.); +#13749 = DIRECTION('',(-0.,1.,-0.)); +#13750 = CYLINDRICAL_SURFACE('',#13751,0.25); +#13751 = AXIS2_PLACEMENT_3D('',#13752,#13753,#13754); +#13752 = CARTESIAN_POINT('',(-1.59,-1.35,2.85)); +#13753 = DIRECTION('',(-0.,1.,-0.)); +#13754 = DIRECTION('',(0.,0.,1.)); +#13755 = ADVANCED_FACE('',(#13756),#13794,.T.); +#13756 = FACE_BOUND('',#13757,.T.); +#13757 = EDGE_LOOP('',(#13758,#13769,#13778,#13787)); +#13758 = ORIENTED_EDGE('',*,*,#13759,.F.); +#13759 = EDGE_CURVE('',#13760,#13762,#13764,.T.); +#13760 = VERTEX_POINT('',#13761); +#13761 = CARTESIAN_POINT('',(-5.533926632825E-16,-1.907850393436, + 2.705041965923)); +#13762 = VERTEX_POINT('',#13763); +#13763 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.907850393436, + 0.794958034077)); +#13764 = CIRCLE('',#13765,0.955041965923); +#13765 = AXIS2_PLACEMENT_3D('',#13766,#13767,#13768); +#13766 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.907850393436,1.75)); +#13767 = DIRECTION('',(-0.,1.,0.)); +#13768 = DIRECTION('',(0.,0.,1.)); +#13769 = ORIENTED_EDGE('',*,*,#13770,.T.); +#13770 = EDGE_CURVE('',#13760,#13771,#13773,.T.); +#13771 = VERTEX_POINT('',#13772); +#13772 = CARTESIAN_POINT('',(-3.258942238068E-16,-2.05,2.55524753571)); +#13773 = CIRCLE('',#13774,0.15); +#13774 = AXIS2_PLACEMENT_3D('',#13775,#13776,#13777); +#13775 = CARTESIAN_POINT('',(-3.350664872814E-16,-1.9,2.55524753571)); +#13776 = DIRECTION('',(1.,0.,-1.224646799147E-16)); +#13777 = DIRECTION('',(-1.224646799147E-16,0.,-1.)); +#13778 = ORIENTED_EDGE('',*,*,#13779,.F.); +#13779 = EDGE_CURVE('',#13780,#13771,#13782,.T.); +#13780 = VERTEX_POINT('',#13781); +#13781 = CARTESIAN_POINT('',(-4.336808689942E-16,-2.05,0.94475246429)); +#13782 = CIRCLE('',#13783,0.80524753571); +#13783 = AXIS2_PLACEMENT_3D('',#13784,#13785,#13786); +#13784 = CARTESIAN_POINT('',(-4.336808689942E-16,-2.05,1.75)); +#13785 = DIRECTION('',(0.,-1.,0.)); +#13786 = DIRECTION('',(0.,0.,-1.)); +#13787 = ORIENTED_EDGE('',*,*,#13788,.F.); +#13788 = EDGE_CURVE('',#13762,#13780,#13789,.T.); +#13789 = CIRCLE('',#13790,0.15); +#13790 = AXIS2_PLACEMENT_3D('',#13791,#13792,#13793); +#13791 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.9,0.94475246429)); +#13792 = DIRECTION('',(-1.,0.,-0.)); +#13793 = DIRECTION('',(-0.,0.,1.)); +#13794 = TOROIDAL_SURFACE('',#13795,0.80524753571,0.15); +#13795 = AXIS2_PLACEMENT_3D('',#13796,#13797,#13798); +#13796 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.9,1.75)); +#13797 = DIRECTION('',(0.,-1.,0.)); +#13798 = DIRECTION('',(0.,0.,-1.)); +#13799 = ADVANCED_FACE('',(#13800),#13832,.T.); +#13800 = FACE_BOUND('',#13801,.T.); +#13801 = EDGE_LOOP('',(#13802,#13809,#13817,#13826)); +#13802 = ORIENTED_EDGE('',*,*,#13803,.T.); +#13803 = EDGE_CURVE('',#13762,#13760,#13804,.T.); +#13804 = CIRCLE('',#13805,0.955041965923); +#13805 = AXIS2_PLACEMENT_3D('',#13806,#13807,#13808); +#13806 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.907850393436,1.75)); +#13807 = DIRECTION('',(-0.,1.,0.)); +#13808 = DIRECTION('',(0.,0.,1.)); +#13809 = ORIENTED_EDGE('',*,*,#13810,.T.); +#13810 = EDGE_CURVE('',#13760,#13811,#13813,.T.); +#13811 = VERTEX_POINT('',#13812); +#13812 = CARTESIAN_POINT('',(-5.561455489089E-16,-1.05,2.75)); +#13813 = LINE('',#13814,#13815); +#13814 = CARTESIAN_POINT('',(-5.561455489089E-16,-1.05,2.75)); +#13815 = VECTOR('',#13816,1.); +#13816 = DIRECTION('',(-6.409306129324E-18,0.998629534755, + 5.233595624294E-02)); +#13817 = ORIENTED_EDGE('',*,*,#13818,.T.); +#13818 = EDGE_CURVE('',#13811,#13819,#13821,.T.); +#13819 = VERTEX_POINT('',#13820); +#13820 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,0.75)); +#13821 = CIRCLE('',#13822,1.); +#13822 = AXIS2_PLACEMENT_3D('',#13823,#13824,#13825); +#13823 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#13824 = DIRECTION('',(0.,-1.,0.)); +#13825 = DIRECTION('',(0.,0.,-1.)); +#13826 = ORIENTED_EDGE('',*,*,#13827,.F.); +#13827 = EDGE_CURVE('',#13762,#13819,#13828,.T.); +#13828 = LINE('',#13829,#13830); +#13829 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,0.75)); +#13830 = VECTOR('',#13831,1.); +#13831 = DIRECTION('',(0.,0.998629534755,-5.233595624294E-02)); +#13832 = CONICAL_SURFACE('',#13833,1.,5.235987755983E-02); +#13833 = AXIS2_PLACEMENT_3D('',#13834,#13835,#13836); +#13834 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#13835 = DIRECTION('',(-0.,1.,-0.)); +#13836 = DIRECTION('',(0.,0.,-1.)); +#13837 = ADVANCED_FACE('',(#13838),#13874,.F.); +#13838 = FACE_BOUND('',#13839,.F.); +#13839 = EDGE_LOOP('',(#13840,#13850,#13859,#13867)); +#13840 = ORIENTED_EDGE('',*,*,#13841,.T.); +#13841 = EDGE_CURVE('',#13842,#13844,#13846,.T.); +#13842 = VERTEX_POINT('',#13843); +#13843 = CARTESIAN_POINT('',(1.2,0.46,2.)); +#13844 = VERTEX_POINT('',#13845); +#13845 = CARTESIAN_POINT('',(1.2,0.66,2.)); +#13846 = LINE('',#13847,#13848); +#13847 = CARTESIAN_POINT('',(1.2,0.46,2.)); +#13848 = VECTOR('',#13849,1.); +#13849 = DIRECTION('',(-0.,1.,-0.)); +#13850 = ORIENTED_EDGE('',*,*,#13851,.F.); +#13851 = EDGE_CURVE('',#13852,#13844,#13854,.T.); +#13852 = VERTEX_POINT('',#13853); +#13853 = CARTESIAN_POINT('',(1.2,0.66,1.5)); +#13854 = CIRCLE('',#13855,0.25); +#13855 = AXIS2_PLACEMENT_3D('',#13856,#13857,#13858); +#13856 = CARTESIAN_POINT('',(1.2,0.66,1.75)); +#13857 = DIRECTION('',(0.,1.,0.)); +#13858 = DIRECTION('',(0.,-0.,1.)); +#13859 = ORIENTED_EDGE('',*,*,#13860,.F.); +#13860 = EDGE_CURVE('',#13861,#13852,#13863,.T.); +#13861 = VERTEX_POINT('',#13862); +#13862 = CARTESIAN_POINT('',(1.2,0.46,1.5)); +#13863 = LINE('',#13864,#13865); +#13864 = CARTESIAN_POINT('',(1.2,0.46,1.5)); +#13865 = VECTOR('',#13866,1.); +#13866 = DIRECTION('',(-0.,1.,-0.)); +#13867 = ORIENTED_EDGE('',*,*,#13868,.T.); +#13868 = EDGE_CURVE('',#13861,#13842,#13869,.T.); +#13869 = CIRCLE('',#13870,0.25); +#13870 = AXIS2_PLACEMENT_3D('',#13871,#13872,#13873); +#13871 = CARTESIAN_POINT('',(1.2,0.46,1.75)); +#13872 = DIRECTION('',(0.,1.,0.)); +#13873 = DIRECTION('',(0.,-0.,1.)); +#13874 = CYLINDRICAL_SURFACE('',#13875,0.25); +#13875 = AXIS2_PLACEMENT_3D('',#13876,#13877,#13878); +#13876 = CARTESIAN_POINT('',(1.2,0.46,1.75)); +#13877 = DIRECTION('',(-0.,1.,-0.)); +#13878 = DIRECTION('',(0.,0.,1.)); +#13879 = ADVANCED_FACE('',(#13880),#13916,.F.); +#13880 = FACE_BOUND('',#13881,.F.); +#13881 = EDGE_LOOP('',(#13882,#13892,#13901,#13909)); +#13882 = ORIENTED_EDGE('',*,*,#13883,.T.); +#13883 = EDGE_CURVE('',#13884,#13886,#13888,.T.); +#13884 = VERTEX_POINT('',#13885); +#13885 = CARTESIAN_POINT('',(-1.2,0.46,2.)); +#13886 = VERTEX_POINT('',#13887); +#13887 = CARTESIAN_POINT('',(-1.2,0.66,2.)); +#13888 = LINE('',#13889,#13890); +#13889 = CARTESIAN_POINT('',(-1.2,0.46,2.)); +#13890 = VECTOR('',#13891,1.); +#13891 = DIRECTION('',(-0.,1.,-0.)); +#13892 = ORIENTED_EDGE('',*,*,#13893,.F.); +#13893 = EDGE_CURVE('',#13894,#13886,#13896,.T.); +#13894 = VERTEX_POINT('',#13895); +#13895 = CARTESIAN_POINT('',(-1.2,0.66,1.5)); +#13896 = CIRCLE('',#13897,0.25); +#13897 = AXIS2_PLACEMENT_3D('',#13898,#13899,#13900); +#13898 = CARTESIAN_POINT('',(-1.2,0.66,1.75)); +#13899 = DIRECTION('',(0.,1.,0.)); +#13900 = DIRECTION('',(0.,-0.,1.)); +#13901 = ORIENTED_EDGE('',*,*,#13902,.F.); +#13902 = EDGE_CURVE('',#13903,#13894,#13905,.T.); +#13903 = VERTEX_POINT('',#13904); +#13904 = CARTESIAN_POINT('',(-1.2,0.46,1.5)); +#13905 = LINE('',#13906,#13907); +#13906 = CARTESIAN_POINT('',(-1.2,0.46,1.5)); +#13907 = VECTOR('',#13908,1.); +#13908 = DIRECTION('',(-0.,1.,-0.)); +#13909 = ORIENTED_EDGE('',*,*,#13910,.T.); +#13910 = EDGE_CURVE('',#13903,#13884,#13911,.T.); +#13911 = CIRCLE('',#13912,0.25); +#13912 = AXIS2_PLACEMENT_3D('',#13913,#13914,#13915); +#13913 = CARTESIAN_POINT('',(-1.2,0.46,1.75)); +#13914 = DIRECTION('',(0.,1.,0.)); +#13915 = DIRECTION('',(0.,-0.,1.)); +#13916 = CYLINDRICAL_SURFACE('',#13917,0.25); +#13917 = AXIS2_PLACEMENT_3D('',#13918,#13919,#13920); +#13918 = CARTESIAN_POINT('',(-1.2,0.46,1.75)); +#13919 = DIRECTION('',(-0.,1.,-0.)); +#13920 = DIRECTION('',(0.,0.,1.)); +#13921 = ADVANCED_FACE('',(#13922),#13958,.F.); +#13922 = FACE_BOUND('',#13923,.F.); +#13923 = EDGE_LOOP('',(#13924,#13934,#13943,#13951)); +#13924 = ORIENTED_EDGE('',*,*,#13925,.T.); +#13925 = EDGE_CURVE('',#13926,#13928,#13930,.T.); +#13926 = VERTEX_POINT('',#13927); +#13927 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,2.)); +#13928 = VERTEX_POINT('',#13929); +#13929 = CARTESIAN_POINT('',(1.192622389734E-15,0.66,2.)); +#13930 = LINE('',#13931,#13932); +#13931 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,2.)); +#13932 = VECTOR('',#13933,1.); +#13933 = DIRECTION('',(-0.,1.,-0.)); +#13934 = ORIENTED_EDGE('',*,*,#13935,.F.); +#13935 = EDGE_CURVE('',#13936,#13928,#13938,.T.); +#13936 = VERTEX_POINT('',#13937); +#13937 = CARTESIAN_POINT('',(1.223238559713E-15,0.66,1.5)); +#13938 = CIRCLE('',#13939,0.25); +#13939 = AXIS2_PLACEMENT_3D('',#13940,#13941,#13942); +#13940 = CARTESIAN_POINT('',(1.192622389734E-15,0.66,1.75)); +#13941 = DIRECTION('',(0.,1.,0.)); +#13942 = DIRECTION('',(0.,-0.,1.)); +#13943 = ORIENTED_EDGE('',*,*,#13944,.F.); +#13944 = EDGE_CURVE('',#13945,#13936,#13947,.T.); +#13945 = VERTEX_POINT('',#13946); +#13946 = CARTESIAN_POINT('',(1.223238559713E-15,0.46,1.5)); +#13947 = LINE('',#13948,#13949); +#13948 = CARTESIAN_POINT('',(1.223238559713E-15,0.46,1.5)); +#13949 = VECTOR('',#13950,1.); +#13950 = DIRECTION('',(-0.,1.,-0.)); +#13951 = ORIENTED_EDGE('',*,*,#13952,.T.); +#13952 = EDGE_CURVE('',#13945,#13926,#13953,.T.); +#13953 = CIRCLE('',#13954,0.25); +#13954 = AXIS2_PLACEMENT_3D('',#13955,#13956,#13957); +#13955 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,1.75)); +#13956 = DIRECTION('',(0.,1.,0.)); +#13957 = DIRECTION('',(0.,-0.,1.)); +#13958 = CYLINDRICAL_SURFACE('',#13959,0.25); +#13959 = AXIS2_PLACEMENT_3D('',#13960,#13961,#13962); +#13960 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,1.75)); +#13961 = DIRECTION('',(-0.,1.,-0.)); +#13962 = DIRECTION('',(0.,0.,1.)); +#13963 = ADVANCED_FACE('',(#13964,#14142,#14216,#14394,#14460,#14558), + #14608,.F.); +#13964 = FACE_BOUND('',#13965,.T.); +#13965 = EDGE_LOOP('',(#13966,#13976,#13992,#14016,#14040,#14056,#14064, + #14080,#14104,#14128)); +#13966 = ORIENTED_EDGE('',*,*,#13967,.T.); +#13967 = EDGE_CURVE('',#13968,#13970,#13972,.T.); +#13968 = VERTEX_POINT('',#13969); +#13969 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.15)); +#13970 = VERTEX_POINT('',#13971); +#13971 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.15)); +#13972 = LINE('',#13973,#13974); +#13973 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.15)); +#13974 = VECTOR('',#13975,1.); +#13975 = DIRECTION('',(0.,-1.,0.)); +#13976 = ORIENTED_EDGE('',*,*,#13977,.T.); +#13977 = EDGE_CURVE('',#13970,#13978,#13980,.T.); +#13978 = VERTEX_POINT('',#13979); +#13979 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.15)); +#13980 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#13981,#13982,#13983,#13984, + #13985,#13986,#13987,#13988,#13989,#13990,#13991),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.112448389909,0.226527675213, + 0.344401949326,0.465864972487,0.591659449352,0.722168487025, + 0.858606387555,1.),.UNSPECIFIED.); +#13981 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.15)); +#13982 = CARTESIAN_POINT('',(0.157833652572,-0.208503724566,0.15)); +#13983 = CARTESIAN_POINT('',(0.162559370965,-0.211112128714,0.15)); +#13984 = CARTESIAN_POINT('',(0.170116787086,-0.214330651243,0.15)); +#13985 = CARTESIAN_POINT('',(0.178069020317,-0.217106778395,0.15)); +#13986 = CARTESIAN_POINT('',(0.186485673437,-0.219320490785,0.15)); +#13987 = CARTESIAN_POINT('',(0.195310795015,-0.221099594723,0.15)); +#13988 = CARTESIAN_POINT('',(0.204591147324,-0.222304645569,0.15)); +#13989 = CARTESIAN_POINT('',(0.214289964556,-0.223097891322,0.15)); +#13990 = CARTESIAN_POINT('',(0.220907916226,-0.223175508757,0.15)); +#13991 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.15)); +#13992 = ORIENTED_EDGE('',*,*,#13993,.T.); +#13993 = EDGE_CURVE('',#13978,#13994,#13996,.T.); +#13994 = VERTEX_POINT('',#13995); +#13995 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.15)); +#13996 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#13997,#13998,#13999,#14000, + #14001,#14002,#14003,#14004,#14005,#14006,#14007,#14008,#14009, + #14010,#14011,#14012,#14013,#14014,#14015),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.783324845577E-02, + 0.132655536508,0.195050884051,0.255582933069,0.314799834147, + 0.373600472826,0.432545595327,0.492430629284,0.552671255963, + 0.612513044188,0.672610250357,0.733838369314,0.796594238568, + 0.861449799291,0.929198942351,1.),.UNSPECIFIED.); +#13997 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.15)); +#13998 = CARTESIAN_POINT('',(0.228615680022,-0.223118220438,0.15)); +#13999 = CARTESIAN_POINT('',(0.237102578688,-0.222928938147,0.15)); +#14000 = CARTESIAN_POINT('',(0.249500694155,-0.221336800082,0.15)); +#14001 = CARTESIAN_POINT('',(0.26122976335,-0.218678671358,0.15)); +#14002 = CARTESIAN_POINT('',(0.272285712409,-0.21494390278,0.15)); +#14003 = CARTESIAN_POINT('',(0.282707220224,-0.210224633355,0.15)); +#14004 = CARTESIAN_POINT('',(0.292440302344,-0.204391150756,0.15)); +#14005 = CARTESIAN_POINT('',(0.301420549512,-0.197397514411,0.15)); +#14006 = CARTESIAN_POINT('',(0.30976679401,-0.189525641653,0.15)); +#14007 = CARTESIAN_POINT('',(0.317213881919,-0.180718114888,0.15)); +#14008 = CARTESIAN_POINT('',(0.323732401999,-0.171191443683,0.15)); +#14009 = CARTESIAN_POINT('',(0.329247039144,-0.160975259276,0.15)); +#14010 = CARTESIAN_POINT('',(0.333721794519,-0.150063953105,0.15)); +#14011 = CARTESIAN_POINT('',(0.337208952873,-0.138479674206,0.15)); +#14012 = CARTESIAN_POINT('',(0.33964758708,-0.126211995098,0.15)); +#14013 = CARTESIAN_POINT('',(0.341232371405,-0.113278127127,0.15)); +#14014 = CARTESIAN_POINT('',(0.341385277511,-0.104412677963,0.15)); +#14015 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.15)); +#14016 = ORIENTED_EDGE('',*,*,#14017,.T.); +#14017 = EDGE_CURVE('',#13994,#14018,#14020,.T.); +#14018 = VERTEX_POINT('',#14019); +#14019 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.15)); +#14020 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14021,#14022,#14023,#14024, + #14025,#14026,#14027,#14028,#14029,#14030,#14031,#14032,#14033, + #14034,#14035,#14036,#14037,#14038,#14039),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.064371857535E-02, + 0.138256715509,0.203364124218,0.266324093803,0.327904761543, + 0.388737715173,0.449423528109,0.510861011459,0.572079396048, + 0.631734428731,0.691117210579,0.75036002949,0.810032900531, + 0.871362450829,0.934427141231,1.),.UNSPECIFIED.); +#14021 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.15)); +#14022 = CARTESIAN_POINT('',(0.34135453377,-9.501843376096E-02,0.15)); +#14023 = CARTESIAN_POINT('',(0.341141443195,-8.549934586882E-02,0.15)); +#14024 = CARTESIAN_POINT('',(0.339447664274,-7.158010627453E-02,0.15)); +#14025 = CARTESIAN_POINT('',(0.336668449673,-5.838160741073E-02,0.15)); +#14026 = CARTESIAN_POINT('',(0.332691028588,-4.592388424087E-02,0.15)); +#14027 = CARTESIAN_POINT('',(0.327626106034,-3.419009934494E-02,0.15)); +#14028 = CARTESIAN_POINT('',(0.32146937733,-2.316463987145E-02,0.15)); +#14029 = CARTESIAN_POINT('',(0.314120802037,-1.290431242463E-02,0.15)); +#14030 = CARTESIAN_POINT('',(0.305697408414,-3.478855919552E-03,0.15)); +#14031 = CARTESIAN_POINT('',(0.296477919733,5.064520705757E-03,0.15)); +#14032 = CARTESIAN_POINT('',(0.286530130439,1.251962640766E-02,0.15)); +#14033 = CARTESIAN_POINT('',(0.275974035462,1.881981363007E-02,0.15)); +#14034 = CARTESIAN_POINT('',(0.264824576437,2.400662773259E-02,0.15)); +#14035 = CARTESIAN_POINT('',(0.253040766104,2.796594344877E-02,0.15)); +#14036 = CARTESIAN_POINT('',(0.240677737658,3.080941882068E-02,0.15)); +#14037 = CARTESIAN_POINT('',(0.227692913127,3.257140091851E-02,0.15)); +#14038 = CARTESIAN_POINT('',(0.218835035096,3.27774950131E-02,0.15)); +#14039 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.15)); +#14040 = ORIENTED_EDGE('',*,*,#14041,.T.); +#14041 = EDGE_CURVE('',#14018,#14042,#14044,.T.); +#14042 = VERTEX_POINT('',#14043); +#14043 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.15)); +#14044 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14045,#14046,#14047,#14048, + #14049,#14050,#14051,#14052,#14053,#14054,#14055),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.145186866472,0.28344261092, + 0.416524365929,0.543181123535,0.665153082638,0.781360206313, + 0.892756655642,1.),.UNSPECIFIED.); +#14045 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.15)); +#14046 = CARTESIAN_POINT('',(0.211413025698,3.286171515756E-02,0.15)); +#14047 = CARTESIAN_POINT('',(0.205738359986,3.282103764139E-02,0.15)); +#14048 = CARTESIAN_POINT('',(0.197413548744,3.231093782495E-02,0.15)); +#14049 = CARTESIAN_POINT('',(0.189476729462,3.159001064541E-02,0.15)); +#14050 = CARTESIAN_POINT('',(0.181916416626,3.046585521142E-02,0.15)); +#14051 = CARTESIAN_POINT('',(0.174732999256,2.912766536345E-02,0.15)); +#14052 = CARTESIAN_POINT('',(0.167953387516,2.738327073211E-02,0.15)); +#14053 = CARTESIAN_POINT('',(0.161534963432,2.542868966077E-02,0.15)); +#14054 = CARTESIAN_POINT('',(0.157477835756,2.378181208882E-02,0.15)); +#14055 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.15)); +#14056 = ORIENTED_EDGE('',*,*,#14057,.T.); +#14057 = EDGE_CURVE('',#14042,#14058,#14060,.T.); +#14058 = VERTEX_POINT('',#14059); +#14059 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.15)); +#14060 = LINE('',#14061,#14062); +#14061 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.15)); +#14062 = VECTOR('',#14063,1.); +#14063 = DIRECTION('',(0.,-1.,0.)); +#14064 = ORIENTED_EDGE('',*,*,#14065,.T.); +#14065 = EDGE_CURVE('',#14058,#14066,#14068,.T.); +#14066 = VERTEX_POINT('',#14067); +#14067 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.15)); +#14068 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14069,#14070,#14071,#14072, + #14073,#14074,#14075,#14076,#14077,#14078,#14079),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.125279696736,0.249419970742, + 0.373356799493,0.496681278782,0.620202915744,0.745086320161, + 0.871269195019,1.),.UNSPECIFIED.); +#14069 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.15)); +#14070 = CARTESIAN_POINT('',(0.157707901285,-9.272527436884E-03,0.15)); +#14071 = CARTESIAN_POINT('',(0.162127902253,-6.704173924513E-03,0.15)); +#14072 = CARTESIAN_POINT('',(0.169079760157,-3.493226567989E-03,0.15)); +#14073 = CARTESIAN_POINT('',(0.176165570944,-7.081920244666E-04,0.15)); +#14074 = CARTESIAN_POINT('',(0.183434938833,1.515058182954E-03,0.15)); +#14075 = CARTESIAN_POINT('',(0.190842112582,3.310349788266E-03,0.15)); +#14076 = CARTESIAN_POINT('',(0.198425933917,4.514502466469E-03,0.15)); +#14077 = CARTESIAN_POINT('',(0.206172034184,5.324660863734E-03,0.15)); +#14078 = CARTESIAN_POINT('',(0.211395885256,5.403641727138E-03,0.15)); +#14079 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.15)); +#14080 = ORIENTED_EDGE('',*,*,#14081,.T.); +#14081 = EDGE_CURVE('',#14066,#14082,#14084,.T.); +#14082 = VERTEX_POINT('',#14083); +#14083 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.15)); +#14084 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14085,#14086,#14087,#14088, + #14089,#14090,#14091,#14092,#14093,#14094,#14095,#14096,#14097, + #14098,#14099,#14100,#14101,#14102,#14103),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.460397028839E-02, + 0.126702413963,0.186756814036,0.245505687365,0.30365202445, + 0.361503073971,0.420240222928,0.480033340777,0.540678134776, + 0.601191806381,0.662333502477,0.724739510297,0.789467736173, + 0.856504860044,0.926312095839,1.),.UNSPECIFIED.); +#14085 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.15)); +#14086 = CARTESIAN_POINT('',(0.217421258149,5.370692854728E-03,0.15)); +#14087 = CARTESIAN_POINT('',(0.224064568337,5.227849523261E-03,0.15)); +#14088 = CARTESIAN_POINT('',(0.233769937764,3.8253921019E-03,0.15)); +#14089 = CARTESIAN_POINT('',(0.24302678606,1.727157293832E-03,0.15)); +#14090 = CARTESIAN_POINT('',(0.25179799389,-1.343772025891E-03,0.15)); +#14091 = CARTESIAN_POINT('',(0.260073601506,-5.30727961219E-03,0.15)); +#14092 = CARTESIAN_POINT('',(0.267846432506,-1.017823144022E-02,0.15)); +#14093 = CARTESIAN_POINT('',(0.27516422277,-1.585219453385E-02,0.15)); +#14094 = CARTESIAN_POINT('',(0.281915341895,-2.239995384738E-02,0.15)); +#14095 = CARTESIAN_POINT('',(0.288067489339,-2.964072979152E-02,0.15)); +#14096 = CARTESIAN_POINT('',(0.293348196923,-3.762240745908E-02,0.15)); +#14097 = CARTESIAN_POINT('',(0.297927371978,-4.612895248102E-02,0.15)); +#14098 = CARTESIAN_POINT('',(0.301594366459,-5.530961003933E-02,0.15)); +#14099 = CARTESIAN_POINT('',(0.30443424127,-6.509394100662E-02,0.15)); +#14100 = CARTESIAN_POINT('',(0.306484032278,-7.546859467313E-02,0.15)); +#14101 = CARTESIAN_POINT('',(0.307671652948,-8.645270552792E-02,0.15)); +#14102 = CARTESIAN_POINT('',(0.307840250648,-9.397238941246E-02,0.15)); +#14103 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.15)); +#14104 = ORIENTED_EDGE('',*,*,#14105,.T.); +#14105 = EDGE_CURVE('',#14082,#14106,#14108,.T.); +#14106 = VERTEX_POINT('',#14107); +#14107 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.15)); +#14108 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14109,#14110,#14111,#14112, + #14113,#14114,#14115,#14116,#14117,#14118,#14119,#14120,#14121, + #14122,#14123,#14124,#14125,#14126,#14127),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.377411937406E-02, + 0.144079114726,0.211348518309,0.27607688574,0.33852091582, + 0.399885116693,0.460254067465,0.520588964391,0.580207684563, + 0.638632908553,0.696364549491,0.75400177466,0.812805681374, + 0.872754425526,0.935181996978,1.),.UNSPECIFIED.); +#14109 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.15)); +#14110 = CARTESIAN_POINT('',(0.307857374306,-0.101489213572,0.15)); +#14111 = CARTESIAN_POINT('',(0.307721730402,-0.108627931021,0.15)); +#14112 = CARTESIAN_POINT('',(0.306556333747,-0.119047350501,0.15)); +#14113 = CARTESIAN_POINT('',(0.304668522686,-0.128899030962,0.15)); +#14114 = CARTESIAN_POINT('',(0.302015437261,-0.138174288757,0.15)); +#14115 = CARTESIAN_POINT('',(0.298555910964,-0.146864540276,0.15)); +#14116 = CARTESIAN_POINT('',(0.294376924443,-0.15499287549,0.15)); +#14117 = CARTESIAN_POINT('',(0.289380420004,-0.162522588398,0.15)); +#14118 = CARTESIAN_POINT('',(0.283676695055,-0.16941842821,0.15)); +#14119 = CARTESIAN_POINT('',(0.277344057966,-0.175602341238,0.15)); +#14120 = CARTESIAN_POINT('',(0.270515118482,-0.181033206318,0.15)); +#14121 = CARTESIAN_POINT('',(0.263174998447,-0.185566288026,0.15)); +#14122 = CARTESIAN_POINT('',(0.255392143278,-0.189325263246,0.15)); +#14123 = CARTESIAN_POINT('',(0.247131388515,-0.192231469545,0.15)); +#14124 = CARTESIAN_POINT('',(0.238377270937,-0.194268822081,0.15)); +#14125 = CARTESIAN_POINT('',(0.229171669416,-0.195530714408,0.15)); +#14126 = CARTESIAN_POINT('',(0.22286677546,-0.195693210798,0.15)); +#14127 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.15)); +#14128 = ORIENTED_EDGE('',*,*,#14129,.T.); +#14129 = EDGE_CURVE('',#14106,#13968,#14130,.T.); +#14130 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14131,#14132,#14133,#14134, + #14135,#14136,#14137,#14138,#14139,#14140,#14141),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.135294604763,0.266765657925, + 0.394816018836,0.520051654434,0.642175702971,0.762651820558, + 0.881834004381,1.),.UNSPECIFIED.); +#14131 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.15)); +#14132 = CARTESIAN_POINT('',(0.216636251566,-0.195736350182,0.15)); +#14133 = CARTESIAN_POINT('',(0.210683856942,-0.195658200034,0.15)); +#14134 = CARTESIAN_POINT('',(0.201905886482,-0.194856206297,0.15)); +#14135 = CARTESIAN_POINT('',(0.193403329287,-0.193649151468,0.15)); +#14136 = CARTESIAN_POINT('',(0.185213141573,-0.191872472788,0.15)); +#14137 = CARTESIAN_POINT('',(0.177307243079,-0.189648472075,0.15)); +#14138 = CARTESIAN_POINT('',(0.169730454833,-0.186854956798,0.15)); +#14139 = CARTESIAN_POINT('',(0.162401815219,-0.183664184702,0.15)); +#14140 = CARTESIAN_POINT('',(0.15778588741,-0.181064276302,0.15)); +#14141 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.15)); +#14142 = FACE_BOUND('',#14143,.T.); +#14143 = EDGE_LOOP('',(#14144,#14154,#14162,#14170,#14194)); +#14144 = ORIENTED_EDGE('',*,*,#14145,.T.); +#14145 = EDGE_CURVE('',#14146,#14148,#14150,.T.); +#14146 = VERTEX_POINT('',#14147); +#14147 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.15)); +#14148 = VERTEX_POINT('',#14149); +#14149 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.15)); +#14150 = LINE('',#14151,#14152); +#14151 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.15)); +#14152 = VECTOR('',#14153,1.); +#14153 = DIRECTION('',(1.,0.,0.)); +#14154 = ORIENTED_EDGE('',*,*,#14155,.T.); +#14155 = EDGE_CURVE('',#14148,#14156,#14158,.T.); +#14156 = VERTEX_POINT('',#14157); +#14157 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02,0.15 + )); +#14158 = LINE('',#14159,#14160); +#14159 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.15)); +#14160 = VECTOR('',#14161,1.); +#14161 = DIRECTION('',(0.,1.,0.)); +#14162 = ORIENTED_EDGE('',*,*,#14163,.T.); +#14163 = EDGE_CURVE('',#14156,#14164,#14166,.T.); +#14164 = VERTEX_POINT('',#14165); +#14165 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.15)); +#14166 = LINE('',#14167,#14168); +#14167 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02,0.15 + )); +#14168 = VECTOR('',#14169,1.); +#14169 = DIRECTION('',(-1.,0.,0.)); +#14170 = ORIENTED_EDGE('',*,*,#14171,.T.); +#14171 = EDGE_CURVE('',#14164,#14172,#14174,.T.); +#14172 = VERTEX_POINT('',#14173); +#14173 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.15)); +#14174 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14175,#14176,#14177,#14178, + #14179,#14180,#14181,#14182,#14183,#14184,#14185,#14186,#14187, + #14188,#14189,#14190,#14191,#14192,#14193),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.86311786766E-02, + 0.134566466039,0.198328154011,0.260789766641,0.321999151484, + 0.382721746503,0.443537474036,0.505133429485,0.566213874765, + 0.626105864618,0.685349322161,0.744995870348,0.805415841815, + 0.867636266346,0.932307782302,1.),.UNSPECIFIED.); +#14175 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.15)); +#14176 = CARTESIAN_POINT('',(-0.151363164187,2.973139779052E-02,0.15)); +#14177 = CARTESIAN_POINT('',(-0.160368680593,2.953067311263E-02,0.15)); +#14178 = CARTESIAN_POINT('',(-0.173574716639,2.80059343019E-02,0.15)); +#14179 = CARTESIAN_POINT('',(-0.186173677392,2.536001684969E-02,0.15)); +#14180 = CARTESIAN_POINT('',(-0.198200209149,2.175039216729E-02,0.15)); +#14181 = CARTESIAN_POINT('',(-0.209668242661,1.7139136031E-02,0.15)); +#14182 = CARTESIAN_POINT('',(-0.220469739613,1.136246309969E-02,0.15)); +#14183 = CARTESIAN_POINT('',(-0.230723215626,4.621140949963E-03,0.15)); +#14184 = CARTESIAN_POINT('',(-0.240295243743,-3.099451121006E-03,0.15)); +#14185 = CARTESIAN_POINT('',(-0.249019812633,-1.168398974297E-02,0.15)); +#14186 = CARTESIAN_POINT('',(-0.25662534286,-2.107265815872E-02,0.15)); +#14187 = CARTESIAN_POINT('',(-0.263136857945,-3.113988430946E-02,0.15)); +#14188 = CARTESIAN_POINT('',(-0.268376914018,-4.196526877278E-02,0.15)); +#14189 = CARTESIAN_POINT('',(-0.27244566113,-5.349048437803E-02,0.15)); +#14190 = CARTESIAN_POINT('',(-0.275326864668,-6.570717386482E-02,0.15)); +#14191 = CARTESIAN_POINT('',(-0.277144101593,-7.862917413655E-02,0.15)); +#14192 = CARTESIAN_POINT('',(-0.277339232417,-8.749043270054E-02,0.15)); +#14193 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.15)); +#14194 = ORIENTED_EDGE('',*,*,#14195,.T.); +#14195 = EDGE_CURVE('',#14172,#14146,#14196,.T.); +#14196 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#14197,#14198,#14199,#14200, + #14201,#14202,#14203,#14204,#14205,#14206,#14207,#14208,#14209, + #14210,#14211,#14212,#14213,#14214,#14215),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.806869584499E-02, + 0.133427432819,0.196146033813,0.257048592449,0.316882663159, + 0.376187208666,0.435960335364,0.496535236863,0.557465343481, + 0.61768686341,0.677943640697,0.738805284806,0.800949336767, + 0.86481466747,0.931024781079,1.),.UNSPECIFIED.); +#14197 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.15)); +#14198 = CARTESIAN_POINT('',(-0.27733805759,-9.674407046988E-02,0.15)); +#14199 = CARTESIAN_POINT('',(-0.27714014369,-0.105999874043,0.15)); +#14200 = CARTESIAN_POINT('',(-0.275331199032,-0.119507922813,0.15)); +#14201 = CARTESIAN_POINT('',(-0.272443525011,-0.132307181048,0.15)); +#14202 = CARTESIAN_POINT('',(-0.268390084546,-0.144390377258,0.15)); +#14203 = CARTESIAN_POINT('',(-0.263142063019,-0.155748796095,0.15)); +#14204 = CARTESIAN_POINT('',(-0.256635298103,-0.166340940351,0.15)); +#14205 = CARTESIAN_POINT('',(-0.249045160493,-0.176247571625,0.15)); +#14206 = CARTESIAN_POINT('',(-0.240319648101,-0.185332960942,0.15)); +#14207 = CARTESIAN_POINT('',(-0.230669860209,-0.19346435198,0.15)); +#14208 = CARTESIAN_POINT('',(-0.220351151139,-0.200696055045,0.15)); +#14209 = CARTESIAN_POINT('',(-0.209274856824,-0.20670463646,0.15)); +#14210 = CARTESIAN_POINT('',(-0.197535579708,-0.211613933363,0.15)); +#14211 = CARTESIAN_POINT('',(-0.185153851815,-0.215511621629,0.15)); +#14212 = CARTESIAN_POINT('',(-0.172076012382,-0.218165366243,0.15)); +#14213 = CARTESIAN_POINT('',(-0.158361497248,-0.219909970895,0.15)); +#14214 = CARTESIAN_POINT('',(-0.148982968879,-0.220079652877,0.15)); +#14215 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.15)); +#14216 = FACE_BOUND('',#14217,.T.); +#14217 = EDGE_LOOP('',(#14218,#14228,#14236,#14244,#14252,#14260,#14268, + #14276,#14284,#14292,#14300,#14308,#14316,#14324,#14332,#14340, + #14348,#14356,#14364,#14372,#14380,#14388)); +#14218 = ORIENTED_EDGE('',*,*,#14219,.T.); +#14219 = EDGE_CURVE('',#14220,#14222,#14224,.T.); +#14220 = VERTEX_POINT('',#14221); +#14221 = CARTESIAN_POINT('',(1.5,6.312596248278E-02,0.15)); +#14222 = VERTEX_POINT('',#14223); +#14223 = CARTESIAN_POINT('',(1.5,0.283245582288,0.15)); +#14224 = LINE('',#14225,#14226); +#14225 = CARTESIAN_POINT('',(1.5,0.,0.15)); +#14226 = VECTOR('',#14227,1.); +#14227 = DIRECTION('',(0.,1.,-0.)); +#14228 = ORIENTED_EDGE('',*,*,#14229,.T.); +#14229 = EDGE_CURVE('',#14222,#14230,#14232,.T.); +#14230 = VERTEX_POINT('',#14231); +#14231 = CARTESIAN_POINT('',(1.5,0.36,0.15)); +#14232 = LINE('',#14233,#14234); +#14233 = CARTESIAN_POINT('',(1.5,0.283245582288,0.15)); +#14234 = VECTOR('',#14235,1.); +#14235 = DIRECTION('',(0.,1.,0.)); +#14236 = ORIENTED_EDGE('',*,*,#14237,.T.); +#14237 = EDGE_CURVE('',#14230,#14238,#14240,.T.); +#14238 = VERTEX_POINT('',#14239); +#14239 = CARTESIAN_POINT('',(2.09,0.36,0.15)); +#14240 = LINE('',#14241,#14242); +#14241 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#14242 = VECTOR('',#14243,1.); +#14243 = DIRECTION('',(1.,0.,0.)); +#14244 = ORIENTED_EDGE('',*,*,#14245,.F.); +#14245 = EDGE_CURVE('',#14246,#14238,#14248,.T.); +#14246 = VERTEX_POINT('',#14247); +#14247 = CARTESIAN_POINT('',(2.09,-0.35,0.15)); +#14248 = LINE('',#14249,#14250); +#14249 = CARTESIAN_POINT('',(2.09,1.36,0.15)); +#14250 = VECTOR('',#14251,1.); +#14251 = DIRECTION('',(-0.,1.,-0.)); +#14252 = ORIENTED_EDGE('',*,*,#14253,.F.); +#14253 = EDGE_CURVE('',#14254,#14246,#14256,.T.); +#14254 = VERTEX_POINT('',#14255); +#14255 = CARTESIAN_POINT('',(-2.09,-0.35,0.15)); +#14256 = LINE('',#14257,#14258); +#14257 = CARTESIAN_POINT('',(2.09,-0.35,0.15)); +#14258 = VECTOR('',#14259,1.); +#14259 = DIRECTION('',(1.,-0.,-0.)); +#14260 = ORIENTED_EDGE('',*,*,#14261,.F.); +#14261 = EDGE_CURVE('',#14262,#14254,#14264,.T.); +#14262 = VERTEX_POINT('',#14263); +#14263 = CARTESIAN_POINT('',(-2.09,0.36,0.15)); +#14264 = LINE('',#14265,#14266); +#14265 = CARTESIAN_POINT('',(-2.09,1.36,0.15)); +#14266 = VECTOR('',#14267,1.); +#14267 = DIRECTION('',(0.,-1.,0.)); +#14268 = ORIENTED_EDGE('',*,*,#14269,.T.); +#14269 = EDGE_CURVE('',#14262,#14270,#14272,.T.); +#14270 = VERTEX_POINT('',#14271); +#14271 = CARTESIAN_POINT('',(-1.5,0.36,0.15)); +#14272 = LINE('',#14273,#14274); +#14273 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#14274 = VECTOR('',#14275,1.); +#14275 = DIRECTION('',(1.,0.,0.)); +#14276 = ORIENTED_EDGE('',*,*,#14277,.F.); +#14277 = EDGE_CURVE('',#14278,#14270,#14280,.T.); +#14278 = VERTEX_POINT('',#14279); +#14279 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.15)); +#14280 = LINE('',#14281,#14282); +#14281 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.15)); +#14282 = VECTOR('',#14283,1.); +#14283 = DIRECTION('',(0.,1.,0.)); +#14284 = ORIENTED_EDGE('',*,*,#14285,.T.); +#14285 = EDGE_CURVE('',#14278,#14286,#14288,.T.); +#14286 = VERTEX_POINT('',#14287); +#14287 = CARTESIAN_POINT('',(-1.5,6.312596248278E-02,0.15)); +#14288 = LINE('',#14289,#14290); +#14289 = CARTESIAN_POINT('',(-1.5,0.,0.15)); +#14290 = VECTOR('',#14291,1.); +#14291 = DIRECTION('',(0.,-1.,0.)); +#14292 = ORIENTED_EDGE('',*,*,#14293,.T.); +#14293 = EDGE_CURVE('',#14286,#14294,#14296,.T.); +#14294 = VERTEX_POINT('',#14295); +#14295 = CARTESIAN_POINT('',(-0.85,6.312596248278E-02,0.15)); +#14296 = LINE('',#14297,#14298); +#14297 = CARTESIAN_POINT('',(0.,6.312596248278E-02,0.15)); +#14298 = VECTOR('',#14299,1.); +#14299 = DIRECTION('',(1.,0.,0.)); +#14300 = ORIENTED_EDGE('',*,*,#14301,.T.); +#14301 = EDGE_CURVE('',#14294,#14302,#14304,.T.); +#14302 = VERTEX_POINT('',#14303); +#14303 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.15)); +#14304 = LINE('',#14305,#14306); +#14305 = CARTESIAN_POINT('',(-0.85,0.,0.15)); +#14306 = VECTOR('',#14307,1.); +#14307 = DIRECTION('',(0.,1.,-0.)); +#14308 = ORIENTED_EDGE('',*,*,#14309,.T.); +#14309 = EDGE_CURVE('',#14302,#14310,#14312,.T.); +#14310 = VERTEX_POINT('',#14311); +#14311 = CARTESIAN_POINT('',(-0.85,0.36,0.15)); +#14312 = LINE('',#14313,#14314); +#14313 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.15)); +#14314 = VECTOR('',#14315,1.); +#14315 = DIRECTION('',(0.,1.,0.)); +#14316 = ORIENTED_EDGE('',*,*,#14317,.T.); +#14317 = EDGE_CURVE('',#14310,#14318,#14320,.T.); +#14318 = VERTEX_POINT('',#14319); +#14319 = CARTESIAN_POINT('',(-0.25,0.36,0.15)); +#14320 = LINE('',#14321,#14322); +#14321 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#14322 = VECTOR('',#14323,1.); +#14323 = DIRECTION('',(1.,0.,0.)); +#14324 = ORIENTED_EDGE('',*,*,#14325,.F.); +#14325 = EDGE_CURVE('',#14326,#14318,#14328,.T.); +#14326 = VERTEX_POINT('',#14327); +#14327 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.15)); +#14328 = LINE('',#14329,#14330); +#14329 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.15)); +#14330 = VECTOR('',#14331,1.); +#14331 = DIRECTION('',(0.,1.,0.)); +#14332 = ORIENTED_EDGE('',*,*,#14333,.T.); +#14333 = EDGE_CURVE('',#14326,#14334,#14336,.T.); +#14334 = VERTEX_POINT('',#14335); +#14335 = CARTESIAN_POINT('',(-0.25,6.312596248278E-02,0.15)); +#14336 = LINE('',#14337,#14338); +#14337 = CARTESIAN_POINT('',(-0.25,0.,0.15)); +#14338 = VECTOR('',#14339,1.); +#14339 = DIRECTION('',(0.,-1.,0.)); +#14340 = ORIENTED_EDGE('',*,*,#14341,.T.); +#14341 = EDGE_CURVE('',#14334,#14342,#14344,.T.); +#14342 = VERTEX_POINT('',#14343); +#14343 = CARTESIAN_POINT('',(0.25,6.312596248278E-02,0.15)); +#14344 = LINE('',#14345,#14346); +#14345 = CARTESIAN_POINT('',(0.,6.312596248278E-02,0.15)); +#14346 = VECTOR('',#14347,1.); +#14347 = DIRECTION('',(1.,0.,0.)); +#14348 = ORIENTED_EDGE('',*,*,#14349,.T.); +#14349 = EDGE_CURVE('',#14342,#14350,#14352,.T.); +#14350 = VERTEX_POINT('',#14351); +#14351 = CARTESIAN_POINT('',(0.25,0.283245582288,0.15)); +#14352 = LINE('',#14353,#14354); +#14353 = CARTESIAN_POINT('',(0.25,0.,0.15)); +#14354 = VECTOR('',#14355,1.); +#14355 = DIRECTION('',(0.,1.,-0.)); +#14356 = ORIENTED_EDGE('',*,*,#14357,.T.); +#14357 = EDGE_CURVE('',#14350,#14358,#14360,.T.); +#14358 = VERTEX_POINT('',#14359); +#14359 = CARTESIAN_POINT('',(0.25,0.36,0.15)); +#14360 = LINE('',#14361,#14362); +#14361 = CARTESIAN_POINT('',(0.25,0.283245582288,0.15)); +#14362 = VECTOR('',#14363,1.); +#14363 = DIRECTION('',(0.,1.,0.)); +#14364 = ORIENTED_EDGE('',*,*,#14365,.T.); +#14365 = EDGE_CURVE('',#14358,#14366,#14368,.T.); +#14366 = VERTEX_POINT('',#14367); +#14367 = CARTESIAN_POINT('',(0.85,0.36,0.15)); +#14368 = LINE('',#14369,#14370); +#14369 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#14370 = VECTOR('',#14371,1.); +#14371 = DIRECTION('',(1.,0.,0.)); +#14372 = ORIENTED_EDGE('',*,*,#14373,.F.); +#14373 = EDGE_CURVE('',#14374,#14366,#14376,.T.); +#14374 = VERTEX_POINT('',#14375); +#14375 = CARTESIAN_POINT('',(0.85,0.283245582288,0.15)); +#14376 = LINE('',#14377,#14378); +#14377 = CARTESIAN_POINT('',(0.85,0.283245582288,0.15)); +#14378 = VECTOR('',#14379,1.); +#14379 = DIRECTION('',(0.,1.,0.)); +#14380 = ORIENTED_EDGE('',*,*,#14381,.T.); +#14381 = EDGE_CURVE('',#14374,#14382,#14384,.T.); +#14382 = VERTEX_POINT('',#14383); +#14383 = CARTESIAN_POINT('',(0.85,6.312596248278E-02,0.15)); +#14384 = LINE('',#14385,#14386); +#14385 = CARTESIAN_POINT('',(0.85,0.,0.15)); +#14386 = VECTOR('',#14387,1.); +#14387 = DIRECTION('',(0.,-1.,0.)); +#14388 = ORIENTED_EDGE('',*,*,#14389,.T.); +#14389 = EDGE_CURVE('',#14382,#14220,#14390,.T.); +#14390 = LINE('',#14391,#14392); +#14391 = CARTESIAN_POINT('',(0.,6.312596248278E-02,0.15)); +#14392 = VECTOR('',#14393,1.); +#14393 = DIRECTION('',(1.,0.,0.)); +#14394 = FACE_BOUND('',#14395,.T.); +#14395 = EDGE_LOOP('',(#14396,#14406,#14414,#14422,#14430,#14438,#14446, + #14454)); +#14396 = ORIENTED_EDGE('',*,*,#14397,.T.); +#14397 = EDGE_CURVE('',#14398,#14400,#14402,.T.); +#14398 = VERTEX_POINT('',#14399); +#14399 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.15)); +#14400 = VERTEX_POINT('',#14401); +#14401 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.15)); +#14402 = LINE('',#14403,#14404); +#14403 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.15)); +#14404 = VECTOR('',#14405,1.); +#14405 = DIRECTION('',(-0.363542485653,-0.931577619485,0.)); +#14406 = ORIENTED_EDGE('',*,*,#14407,.T.); +#14407 = EDGE_CURVE('',#14400,#14408,#14410,.T.); +#14408 = VERTEX_POINT('',#14409); +#14409 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.15)); +#14410 = LINE('',#14411,#14412); +#14411 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.15)); +#14412 = VECTOR('',#14413,1.); +#14413 = DIRECTION('',(1.,0.,0.)); +#14414 = ORIENTED_EDGE('',*,*,#14415,.T.); +#14415 = EDGE_CURVE('',#14408,#14416,#14418,.T.); +#14416 = VERTEX_POINT('',#14417); +#14417 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.15)); +#14418 = LINE('',#14419,#14420); +#14419 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.15)); +#14420 = VECTOR('',#14421,1.); +#14421 = DIRECTION('',(0.339330377275,0.940667260544,0.)); +#14422 = ORIENTED_EDGE('',*,*,#14423,.T.); +#14423 = EDGE_CURVE('',#14416,#14424,#14426,.T.); +#14424 = VERTEX_POINT('',#14425); +#14425 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.15)); +#14426 = LINE('',#14427,#14428); +#14427 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.15)); +#14428 = VECTOR('',#14429,1.); +#14429 = DIRECTION('',(1.,0.,0.)); +#14430 = ORIENTED_EDGE('',*,*,#14431,.T.); +#14431 = EDGE_CURVE('',#14424,#14432,#14434,.T.); +#14432 = VERTEX_POINT('',#14433); +#14433 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.15)); +#14434 = LINE('',#14435,#14436); +#14435 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.15)); +#14436 = VECTOR('',#14437,1.); +#14437 = DIRECTION('',(0.322202485606,-0.946670776072,0.)); +#14438 = ORIENTED_EDGE('',*,*,#14439,.T.); +#14439 = EDGE_CURVE('',#14432,#14440,#14442,.T.); +#14440 = VERTEX_POINT('',#14441); +#14441 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.15)); +#14442 = LINE('',#14443,#14444); +#14443 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.15)); +#14444 = VECTOR('',#14445,1.); +#14445 = DIRECTION('',(1.,0.,0.)); +#14446 = ORIENTED_EDGE('',*,*,#14447,.T.); +#14447 = EDGE_CURVE('',#14440,#14448,#14450,.T.); +#14448 = VERTEX_POINT('',#14449); +#14449 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.15)); +#14450 = LINE('',#14451,#14452); +#14451 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.15)); +#14452 = VECTOR('',#14453,1.); +#14453 = DIRECTION('',(-0.353622392329,0.93538826358,0.)); +#14454 = ORIENTED_EDGE('',*,*,#14455,.T.); +#14455 = EDGE_CURVE('',#14448,#14398,#14456,.T.); +#14456 = LINE('',#14457,#14458); +#14457 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.15)); +#14458 = VECTOR('',#14459,1.); +#14459 = DIRECTION('',(-1.,0.,0.)); +#14460 = FACE_BOUND('',#14461,.T.); +#14461 = EDGE_LOOP('',(#14462,#14472,#14480,#14488,#14496,#14504,#14512, + #14520,#14528,#14536,#14544,#14552)); +#14462 = ORIENTED_EDGE('',*,*,#14463,.T.); +#14463 = EDGE_CURVE('',#14464,#14466,#14468,.T.); +#14464 = VERTEX_POINT('',#14465); +#14465 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.15)); +#14466 = VERTEX_POINT('',#14467); +#14467 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.15)); +#14468 = LINE('',#14469,#14470); +#14469 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.15)); +#14470 = VECTOR('',#14471,1.); +#14471 = DIRECTION('',(0.,-1.,0.)); +#14472 = ORIENTED_EDGE('',*,*,#14473,.T.); +#14473 = EDGE_CURVE('',#14466,#14474,#14476,.T.); +#14474 = VERTEX_POINT('',#14475); +#14475 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.15)); +#14476 = LINE('',#14477,#14478); +#14477 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.15)); +#14478 = VECTOR('',#14479,1.); +#14479 = DIRECTION('',(1.,0.,0.)); +#14480 = ORIENTED_EDGE('',*,*,#14481,.T.); +#14481 = EDGE_CURVE('',#14474,#14482,#14484,.T.); +#14482 = VERTEX_POINT('',#14483); +#14483 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.15)); +#14484 = LINE('',#14485,#14486); +#14485 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.15)); +#14486 = VECTOR('',#14487,1.); +#14487 = DIRECTION('',(0.,1.,0.)); +#14488 = ORIENTED_EDGE('',*,*,#14489,.T.); +#14489 = EDGE_CURVE('',#14482,#14490,#14492,.T.); +#14490 = VERTEX_POINT('',#14491); +#14491 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02,0.15 + )); +#14492 = LINE('',#14493,#14494); +#14493 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.15)); +#14494 = VECTOR('',#14495,1.); +#14495 = DIRECTION('',(-1.,0.,0.)); +#14496 = ORIENTED_EDGE('',*,*,#14497,.T.); +#14497 = EDGE_CURVE('',#14490,#14498,#14500,.T.); +#14498 = VERTEX_POINT('',#14499); +#14499 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03,0.15 + )); +#14500 = LINE('',#14501,#14502); +#14501 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02,0.15 + )); +#14502 = VECTOR('',#14503,1.); +#14503 = DIRECTION('',(0.,-1.,0.)); +#14504 = ORIENTED_EDGE('',*,*,#14505,.T.); +#14505 = EDGE_CURVE('',#14498,#14506,#14508,.T.); +#14506 = VERTEX_POINT('',#14507); +#14507 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.15) + ); +#14508 = LINE('',#14509,#14510); +#14509 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03,0.15 + )); +#14510 = VECTOR('',#14511,1.); +#14511 = DIRECTION('',(1.,0.,0.)); +#14512 = ORIENTED_EDGE('',*,*,#14513,.T.); +#14513 = EDGE_CURVE('',#14506,#14514,#14516,.T.); +#14514 = VERTEX_POINT('',#14515); +#14515 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02,0.15 + )); +#14516 = LINE('',#14517,#14518); +#14517 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.15) + ); +#14518 = VECTOR('',#14519,1.); +#14519 = DIRECTION('',(0.,-1.,0.)); +#14520 = ORIENTED_EDGE('',*,*,#14521,.T.); +#14521 = EDGE_CURVE('',#14514,#14522,#14524,.T.); +#14522 = VERTEX_POINT('',#14523); +#14523 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.15)); +#14524 = LINE('',#14525,#14526); +#14525 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02,0.15 + )); +#14526 = VECTOR('',#14527,1.); +#14527 = DIRECTION('',(-1.,0.,0.)); +#14528 = ORIENTED_EDGE('',*,*,#14529,.T.); +#14529 = EDGE_CURVE('',#14522,#14530,#14532,.T.); +#14530 = VERTEX_POINT('',#14531); +#14531 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.15)); +#14532 = LINE('',#14533,#14534); +#14533 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.15)); +#14534 = VECTOR('',#14535,1.); +#14535 = DIRECTION('',(0.,-1.,0.)); +#14536 = ORIENTED_EDGE('',*,*,#14537,.T.); +#14537 = EDGE_CURVE('',#14530,#14538,#14540,.T.); +#14538 = VERTEX_POINT('',#14539); +#14539 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.15)); +#14540 = LINE('',#14541,#14542); +#14541 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.15)); +#14542 = VECTOR('',#14543,1.); +#14543 = DIRECTION('',(1.,0.,0.)); +#14544 = ORIENTED_EDGE('',*,*,#14545,.T.); +#14545 = EDGE_CURVE('',#14538,#14546,#14548,.T.); +#14546 = VERTEX_POINT('',#14547); +#14547 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.15)); +#14548 = LINE('',#14549,#14550); +#14549 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.15)); +#14550 = VECTOR('',#14551,1.); +#14551 = DIRECTION('',(0.,-1.,0.)); +#14552 = ORIENTED_EDGE('',*,*,#14553,.T.); +#14553 = EDGE_CURVE('',#14546,#14464,#14554,.T.); +#14554 = LINE('',#14555,#14556); +#14555 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.15)); +#14556 = VECTOR('',#14557,1.); +#14557 = DIRECTION('',(-1.,0.,0.)); +#14558 = FACE_BOUND('',#14559,.T.); +#14559 = EDGE_LOOP('',(#14560,#14570,#14578,#14586,#14594,#14602)); +#14560 = ORIENTED_EDGE('',*,*,#14561,.T.); +#14561 = EDGE_CURVE('',#14562,#14564,#14566,.T.); +#14562 = VERTEX_POINT('',#14563); +#14563 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.15)); +#14564 = VERTEX_POINT('',#14565); +#14565 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.15)); +#14566 = LINE('',#14567,#14568); +#14567 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.15)); +#14568 = VECTOR('',#14569,1.); +#14569 = DIRECTION('',(0.,-1.,0.)); +#14570 = ORIENTED_EDGE('',*,*,#14571,.T.); +#14571 = EDGE_CURVE('',#14564,#14572,#14574,.T.); +#14572 = VERTEX_POINT('',#14573); +#14573 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.15)); +#14574 = LINE('',#14575,#14576); +#14575 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.15)); +#14576 = VECTOR('',#14577,1.); +#14577 = DIRECTION('',(1.,0.,0.)); +#14578 = ORIENTED_EDGE('',*,*,#14579,.T.); +#14579 = EDGE_CURVE('',#14572,#14580,#14582,.T.); +#14580 = VERTEX_POINT('',#14581); +#14581 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.15)); +#14582 = LINE('',#14583,#14584); +#14583 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.15)); +#14584 = VECTOR('',#14585,1.); +#14585 = DIRECTION('',(0.,1.,0.)); +#14586 = ORIENTED_EDGE('',*,*,#14587,.T.); +#14587 = EDGE_CURVE('',#14580,#14588,#14590,.T.); +#14588 = VERTEX_POINT('',#14589); +#14589 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.15)); +#14590 = LINE('',#14591,#14592); +#14591 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.15)); +#14592 = VECTOR('',#14593,1.); +#14593 = DIRECTION('',(-1.,0.,0.)); +#14594 = ORIENTED_EDGE('',*,*,#14595,.T.); +#14595 = EDGE_CURVE('',#14588,#14596,#14598,.T.); +#14596 = VERTEX_POINT('',#14597); +#14597 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.15)); +#14598 = LINE('',#14599,#14600); +#14599 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.15)); +#14600 = VECTOR('',#14601,1.); +#14601 = DIRECTION('',(0.,-1.,0.)); +#14602 = ORIENTED_EDGE('',*,*,#14603,.T.); +#14603 = EDGE_CURVE('',#14596,#14562,#14604,.T.); +#14604 = LINE('',#14605,#14606); +#14605 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.15)); +#14606 = VECTOR('',#14607,1.); +#14607 = DIRECTION('',(-1.,0.,0.)); +#14608 = PLANE('',#14609); +#14609 = AXIS2_PLACEMENT_3D('',#14610,#14611,#14612); +#14610 = CARTESIAN_POINT('',(0.,0.,0.15)); +#14611 = DIRECTION('',(-0.,0.,1.)); +#14612 = DIRECTION('',(1.,0.,0.)); +#14613 = ADVANCED_FACE('',(#14614,#14650),#14892,.F.); +#14614 = FACE_BOUND('',#14615,.T.); +#14615 = EDGE_LOOP('',(#14616,#14626,#14635,#14643)); +#14616 = ORIENTED_EDGE('',*,*,#14617,.F.); +#14617 = EDGE_CURVE('',#14618,#14620,#14622,.T.); +#14618 = VERTEX_POINT('',#14619); +#14619 = CARTESIAN_POINT('',(-0.8,1.36,2.55)); +#14620 = VERTEX_POINT('',#14621); +#14621 = CARTESIAN_POINT('',(0.8,1.36,2.55)); +#14622 = LINE('',#14623,#14624); +#14623 = CARTESIAN_POINT('',(-0.8,1.36,2.55)); +#14624 = VECTOR('',#14625,1.); +#14625 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#14626 = ORIENTED_EDGE('',*,*,#14627,.F.); +#14627 = EDGE_CURVE('',#14628,#14618,#14630,.T.); +#14628 = VERTEX_POINT('',#14629); +#14629 = CARTESIAN_POINT('',(-0.8,1.36,0.95)); +#14630 = CIRCLE('',#14631,0.8); +#14631 = AXIS2_PLACEMENT_3D('',#14632,#14633,#14634); +#14632 = CARTESIAN_POINT('',(-0.8,1.36,1.75)); +#14633 = DIRECTION('',(0.,1.,0.)); +#14634 = DIRECTION('',(0.,-0.,1.)); +#14635 = ORIENTED_EDGE('',*,*,#14636,.F.); +#14636 = EDGE_CURVE('',#14637,#14628,#14639,.T.); +#14637 = VERTEX_POINT('',#14638); +#14638 = CARTESIAN_POINT('',(0.8,1.36,0.95)); +#14639 = LINE('',#14640,#14641); +#14640 = CARTESIAN_POINT('',(-0.8,1.36,0.95)); +#14641 = VECTOR('',#14642,1.); +#14642 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#14643 = ORIENTED_EDGE('',*,*,#14644,.F.); +#14644 = EDGE_CURVE('',#14620,#14637,#14645,.T.); +#14645 = CIRCLE('',#14646,0.8); +#14646 = AXIS2_PLACEMENT_3D('',#14647,#14648,#14649); +#14647 = CARTESIAN_POINT('',(0.8,1.36,1.75)); +#14648 = DIRECTION('',(0.,1.,0.)); +#14649 = DIRECTION('',(0.,-0.,1.)); +#14650 = FACE_BOUND('',#14651,.T.); +#14651 = EDGE_LOOP('',(#14652,#14662,#14670,#14678,#14686,#14694,#14702, + #14710,#14718,#14726,#14734,#14742,#14750,#14758,#14766,#14774, + #14782,#14790,#14798,#14806,#14814,#14822,#14830,#14838,#14846, + #14854,#14862,#14870,#14878,#14886)); +#14652 = ORIENTED_EDGE('',*,*,#14653,.F.); +#14653 = EDGE_CURVE('',#14654,#14656,#14658,.T.); +#14654 = VERTEX_POINT('',#14655); +#14655 = CARTESIAN_POINT('',(0.85,1.36,0.225)); +#14656 = VERTEX_POINT('',#14657); +#14657 = CARTESIAN_POINT('',(0.85,1.36,0.55)); +#14658 = LINE('',#14659,#14660); +#14659 = CARTESIAN_POINT('',(0.85,1.36,0.225)); +#14660 = VECTOR('',#14661,1.); +#14661 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14662 = ORIENTED_EDGE('',*,*,#14663,.T.); +#14663 = EDGE_CURVE('',#14654,#14664,#14666,.T.); +#14664 = VERTEX_POINT('',#14665); +#14665 = CARTESIAN_POINT('',(0.85,1.36,0.18)); +#14666 = LINE('',#14667,#14668); +#14667 = CARTESIAN_POINT('',(0.85,1.36,3.35)); +#14668 = VECTOR('',#14669,1.); +#14669 = DIRECTION('',(0.,0.,-1.)); +#14670 = ORIENTED_EDGE('',*,*,#14671,.T.); +#14671 = EDGE_CURVE('',#14664,#14672,#14674,.T.); +#14672 = VERTEX_POINT('',#14673); +#14673 = CARTESIAN_POINT('',(0.25,1.36,0.18)); +#14674 = LINE('',#14675,#14676); +#14675 = CARTESIAN_POINT('',(2.06,1.36,0.18)); +#14676 = VECTOR('',#14677,1.); +#14677 = DIRECTION('',(-1.,0.,0.)); +#14678 = ORIENTED_EDGE('',*,*,#14679,.T.); +#14679 = EDGE_CURVE('',#14672,#14680,#14682,.T.); +#14680 = VERTEX_POINT('',#14681); +#14681 = CARTESIAN_POINT('',(0.25,1.36,0.225)); +#14682 = LINE('',#14683,#14684); +#14683 = CARTESIAN_POINT('',(0.25,1.36,3.35)); +#14684 = VECTOR('',#14685,1.); +#14685 = DIRECTION('',(-0.,0.,1.)); +#14686 = ORIENTED_EDGE('',*,*,#14687,.T.); +#14687 = EDGE_CURVE('',#14680,#14688,#14690,.T.); +#14688 = VERTEX_POINT('',#14689); +#14689 = CARTESIAN_POINT('',(0.25,1.36,0.55)); +#14690 = LINE('',#14691,#14692); +#14691 = CARTESIAN_POINT('',(0.25,1.36,0.225)); +#14692 = VECTOR('',#14693,1.); +#14693 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14694 = ORIENTED_EDGE('',*,*,#14695,.F.); +#14695 = EDGE_CURVE('',#14696,#14688,#14698,.T.); +#14696 = VERTEX_POINT('',#14697); +#14697 = CARTESIAN_POINT('',(-0.25,1.36,0.55)); +#14698 = LINE('',#14699,#14700); +#14699 = CARTESIAN_POINT('',(-0.25,1.36,0.55)); +#14700 = VECTOR('',#14701,1.); +#14701 = DIRECTION('',(1.,0.,0.)); +#14702 = ORIENTED_EDGE('',*,*,#14703,.F.); +#14703 = EDGE_CURVE('',#14704,#14696,#14706,.T.); +#14704 = VERTEX_POINT('',#14705); +#14705 = CARTESIAN_POINT('',(-0.25,1.36,0.225)); +#14706 = LINE('',#14707,#14708); +#14707 = CARTESIAN_POINT('',(-0.25,1.36,0.225)); +#14708 = VECTOR('',#14709,1.); +#14709 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14710 = ORIENTED_EDGE('',*,*,#14711,.T.); +#14711 = EDGE_CURVE('',#14704,#14712,#14714,.T.); +#14712 = VERTEX_POINT('',#14713); +#14713 = CARTESIAN_POINT('',(-0.25,1.36,0.18)); +#14714 = LINE('',#14715,#14716); +#14715 = CARTESIAN_POINT('',(-0.25,1.36,3.35)); +#14716 = VECTOR('',#14717,1.); +#14717 = DIRECTION('',(0.,0.,-1.)); +#14718 = ORIENTED_EDGE('',*,*,#14719,.T.); +#14719 = EDGE_CURVE('',#14712,#14720,#14722,.T.); +#14720 = VERTEX_POINT('',#14721); +#14721 = CARTESIAN_POINT('',(-0.85,1.36,0.18)); +#14722 = LINE('',#14723,#14724); +#14723 = CARTESIAN_POINT('',(2.06,1.36,0.18)); +#14724 = VECTOR('',#14725,1.); +#14725 = DIRECTION('',(-1.,0.,0.)); +#14726 = ORIENTED_EDGE('',*,*,#14727,.T.); +#14727 = EDGE_CURVE('',#14720,#14728,#14730,.T.); +#14728 = VERTEX_POINT('',#14729); +#14729 = CARTESIAN_POINT('',(-0.85,1.36,0.225)); +#14730 = LINE('',#14731,#14732); +#14731 = CARTESIAN_POINT('',(-0.85,1.36,3.35)); +#14732 = VECTOR('',#14733,1.); +#14733 = DIRECTION('',(-0.,0.,1.)); +#14734 = ORIENTED_EDGE('',*,*,#14735,.T.); +#14735 = EDGE_CURVE('',#14728,#14736,#14738,.T.); +#14736 = VERTEX_POINT('',#14737); +#14737 = CARTESIAN_POINT('',(-0.85,1.36,0.55)); +#14738 = LINE('',#14739,#14740); +#14739 = CARTESIAN_POINT('',(-0.85,1.36,0.225)); +#14740 = VECTOR('',#14741,1.); +#14741 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14742 = ORIENTED_EDGE('',*,*,#14743,.F.); +#14743 = EDGE_CURVE('',#14744,#14736,#14746,.T.); +#14744 = VERTEX_POINT('',#14745); +#14745 = CARTESIAN_POINT('',(-1.5,1.36,0.55)); +#14746 = LINE('',#14747,#14748); +#14747 = CARTESIAN_POINT('',(-1.5,1.36,0.55)); +#14748 = VECTOR('',#14749,1.); +#14749 = DIRECTION('',(1.,0.,0.)); +#14750 = ORIENTED_EDGE('',*,*,#14751,.F.); +#14751 = EDGE_CURVE('',#14752,#14744,#14754,.T.); +#14752 = VERTEX_POINT('',#14753); +#14753 = CARTESIAN_POINT('',(-1.5,1.36,0.225)); +#14754 = LINE('',#14755,#14756); +#14755 = CARTESIAN_POINT('',(-1.5,1.36,0.225)); +#14756 = VECTOR('',#14757,1.); +#14757 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14758 = ORIENTED_EDGE('',*,*,#14759,.T.); +#14759 = EDGE_CURVE('',#14752,#14760,#14762,.T.); +#14760 = VERTEX_POINT('',#14761); +#14761 = CARTESIAN_POINT('',(-1.5,1.36,0.18)); +#14762 = LINE('',#14763,#14764); +#14763 = CARTESIAN_POINT('',(-1.5,1.36,3.35)); +#14764 = VECTOR('',#14765,1.); +#14765 = DIRECTION('',(0.,0.,-1.)); +#14766 = ORIENTED_EDGE('',*,*,#14767,.T.); +#14767 = EDGE_CURVE('',#14760,#14768,#14770,.T.); +#14768 = VERTEX_POINT('',#14769); +#14769 = CARTESIAN_POINT('',(-1.74,1.36,0.18)); +#14770 = LINE('',#14771,#14772); +#14771 = CARTESIAN_POINT('',(2.06,1.36,0.18)); +#14772 = VECTOR('',#14773,1.); +#14773 = DIRECTION('',(-1.,0.,0.)); +#14774 = ORIENTED_EDGE('',*,*,#14775,.F.); +#14775 = EDGE_CURVE('',#14776,#14768,#14778,.T.); +#14776 = VERTEX_POINT('',#14777); +#14777 = CARTESIAN_POINT('',(-1.74,1.36,0.65014819764)); +#14778 = LINE('',#14779,#14780); +#14779 = CARTESIAN_POINT('',(-1.74,1.36,0.15)); +#14780 = VECTOR('',#14781,1.); +#14781 = DIRECTION('',(-0.,-0.,-1.)); +#14782 = ORIENTED_EDGE('',*,*,#14783,.F.); +#14783 = EDGE_CURVE('',#14784,#14776,#14786,.T.); +#14784 = VERTEX_POINT('',#14785); +#14785 = CARTESIAN_POINT('',(-2.06,1.36,1.107155559798)); +#14786 = LINE('',#14787,#14788); +#14787 = CARTESIAN_POINT('',(-1.74,1.36,0.65014819764)); +#14788 = VECTOR('',#14789,1.); +#14789 = DIRECTION('',(0.573576436351,-0.,-0.819152044289)); +#14790 = ORIENTED_EDGE('',*,*,#14791,.T.); +#14791 = EDGE_CURVE('',#14784,#14792,#14794,.T.); +#14792 = VERTEX_POINT('',#14793); +#14793 = CARTESIAN_POINT('',(-2.06,1.36,2.392844440202)); +#14794 = LINE('',#14795,#14796); +#14795 = CARTESIAN_POINT('',(-2.06,1.36,0.18)); +#14796 = VECTOR('',#14797,1.); +#14797 = DIRECTION('',(0.,0.,1.)); +#14798 = ORIENTED_EDGE('',*,*,#14799,.F.); +#14799 = EDGE_CURVE('',#14800,#14792,#14802,.T.); +#14800 = VERTEX_POINT('',#14801); +#14801 = CARTESIAN_POINT('',(-1.74,1.36,2.84985180236)); +#14802 = LINE('',#14803,#14804); +#14803 = CARTESIAN_POINT('',(-1.74,1.36,2.84985180236)); +#14804 = VECTOR('',#14805,1.); +#14805 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#14806 = ORIENTED_EDGE('',*,*,#14807,.F.); +#14807 = EDGE_CURVE('',#14808,#14800,#14810,.T.); +#14808 = VERTEX_POINT('',#14809); +#14809 = CARTESIAN_POINT('',(-1.74,1.36,3.32)); +#14810 = LINE('',#14811,#14812); +#14811 = CARTESIAN_POINT('',(-1.74,1.36,3.35)); +#14812 = VECTOR('',#14813,1.); +#14813 = DIRECTION('',(0.,0.,-1.)); +#14814 = ORIENTED_EDGE('',*,*,#14815,.T.); +#14815 = EDGE_CURVE('',#14808,#14816,#14818,.T.); +#14816 = VERTEX_POINT('',#14817); +#14817 = CARTESIAN_POINT('',(1.74,1.36,3.32)); +#14818 = LINE('',#14819,#14820); +#14819 = CARTESIAN_POINT('',(2.06,1.36,3.32)); +#14820 = VECTOR('',#14821,1.); +#14821 = DIRECTION('',(1.,-0.,-0.)); +#14822 = ORIENTED_EDGE('',*,*,#14823,.F.); +#14823 = EDGE_CURVE('',#14824,#14816,#14826,.T.); +#14824 = VERTEX_POINT('',#14825); +#14825 = CARTESIAN_POINT('',(1.74,1.36,2.84985180236)); +#14826 = LINE('',#14827,#14828); +#14827 = CARTESIAN_POINT('',(1.74,1.36,3.35)); +#14828 = VECTOR('',#14829,1.); +#14829 = DIRECTION('',(8.671047322381E-16,-0.,1.)); +#14830 = ORIENTED_EDGE('',*,*,#14831,.F.); +#14831 = EDGE_CURVE('',#14832,#14824,#14834,.T.); +#14832 = VERTEX_POINT('',#14833); +#14833 = CARTESIAN_POINT('',(2.06,1.36,2.392844440202)); +#14834 = LINE('',#14835,#14836); +#14835 = CARTESIAN_POINT('',(1.74,1.36,2.84985180236)); +#14836 = VECTOR('',#14837,1.); +#14837 = DIRECTION('',(-0.573576436351,-0.,0.819152044289)); +#14838 = ORIENTED_EDGE('',*,*,#14839,.T.); +#14839 = EDGE_CURVE('',#14832,#14840,#14842,.T.); +#14840 = VERTEX_POINT('',#14841); +#14841 = CARTESIAN_POINT('',(2.06,1.36,1.107155559798)); +#14842 = LINE('',#14843,#14844); +#14843 = CARTESIAN_POINT('',(2.06,1.36,0.18)); +#14844 = VECTOR('',#14845,1.); +#14845 = DIRECTION('',(-2.762298528625E-16,-0.,-1.)); +#14846 = ORIENTED_EDGE('',*,*,#14847,.F.); +#14847 = EDGE_CURVE('',#14848,#14840,#14850,.T.); +#14848 = VERTEX_POINT('',#14849); +#14849 = CARTESIAN_POINT('',(1.74,1.36,0.65014819764)); +#14850 = LINE('',#14851,#14852); +#14851 = CARTESIAN_POINT('',(1.74,1.36,0.65014819764)); +#14852 = VECTOR('',#14853,1.); +#14853 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#14854 = ORIENTED_EDGE('',*,*,#14855,.F.); +#14855 = EDGE_CURVE('',#14856,#14848,#14858,.T.); +#14856 = VERTEX_POINT('',#14857); +#14857 = CARTESIAN_POINT('',(1.74,1.36,0.18)); +#14858 = LINE('',#14859,#14860); +#14859 = CARTESIAN_POINT('',(1.74,1.36,0.15)); +#14860 = VECTOR('',#14861,1.); +#14861 = DIRECTION('',(0.,0.,1.)); +#14862 = ORIENTED_EDGE('',*,*,#14863,.T.); +#14863 = EDGE_CURVE('',#14856,#14864,#14866,.T.); +#14864 = VERTEX_POINT('',#14865); +#14865 = CARTESIAN_POINT('',(1.5,1.36,0.18)); +#14866 = LINE('',#14867,#14868); +#14867 = CARTESIAN_POINT('',(2.06,1.36,0.18)); +#14868 = VECTOR('',#14869,1.); +#14869 = DIRECTION('',(-1.,0.,0.)); +#14870 = ORIENTED_EDGE('',*,*,#14871,.T.); +#14871 = EDGE_CURVE('',#14864,#14872,#14874,.T.); +#14872 = VERTEX_POINT('',#14873); +#14873 = CARTESIAN_POINT('',(1.5,1.36,0.225)); +#14874 = LINE('',#14875,#14876); +#14875 = CARTESIAN_POINT('',(1.5,1.36,3.35)); +#14876 = VECTOR('',#14877,1.); +#14877 = DIRECTION('',(-0.,0.,1.)); +#14878 = ORIENTED_EDGE('',*,*,#14879,.T.); +#14879 = EDGE_CURVE('',#14872,#14880,#14882,.T.); +#14880 = VERTEX_POINT('',#14881); +#14881 = CARTESIAN_POINT('',(1.5,1.36,0.55)); +#14882 = LINE('',#14883,#14884); +#14883 = CARTESIAN_POINT('',(1.5,1.36,0.225)); +#14884 = VECTOR('',#14885,1.); +#14885 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#14886 = ORIENTED_EDGE('',*,*,#14887,.F.); +#14887 = EDGE_CURVE('',#14656,#14880,#14888,.T.); +#14888 = LINE('',#14889,#14890); +#14889 = CARTESIAN_POINT('',(0.85,1.36,0.55)); +#14890 = VECTOR('',#14891,1.); +#14891 = DIRECTION('',(1.,1.251002506714E-16,-8.346705449626E-32)); +#14892 = PLANE('',#14893); +#14893 = AXIS2_PLACEMENT_3D('',#14894,#14895,#14896); +#14894 = CARTESIAN_POINT('',(-2.09,1.36,3.35)); +#14895 = DIRECTION('',(0.,-1.,0.)); +#14896 = DIRECTION('',(0.,-0.,-1.)); +#14897 = ADVANCED_FACE('',(#14898),#14923,.F.); +#14898 = FACE_BOUND('',#14899,.T.); +#14899 = EDGE_LOOP('',(#14900,#14908,#14916,#14922)); +#14900 = ORIENTED_EDGE('',*,*,#14901,.F.); +#14901 = EDGE_CURVE('',#14902,#14768,#14904,.T.); +#14902 = VERTEX_POINT('',#14903); +#14903 = CARTESIAN_POINT('',(-1.74,0.66,0.18)); +#14904 = LINE('',#14905,#14906); +#14905 = CARTESIAN_POINT('',(-1.74,0.66,0.18)); +#14906 = VECTOR('',#14907,1.); +#14907 = DIRECTION('',(0.,1.,0.)); +#14908 = ORIENTED_EDGE('',*,*,#14909,.F.); +#14909 = EDGE_CURVE('',#14910,#14902,#14912,.T.); +#14910 = VERTEX_POINT('',#14911); +#14911 = CARTESIAN_POINT('',(-1.74,0.66,0.65014819764)); +#14912 = LINE('',#14913,#14914); +#14913 = CARTESIAN_POINT('',(-1.74,0.66,0.15)); +#14914 = VECTOR('',#14915,1.); +#14915 = DIRECTION('',(-0.,-0.,-1.)); +#14916 = ORIENTED_EDGE('',*,*,#14917,.T.); +#14917 = EDGE_CURVE('',#14910,#14776,#14918,.T.); +#14918 = LINE('',#14919,#14920); +#14919 = CARTESIAN_POINT('',(-1.74,0.66,0.65014819764)); +#14920 = VECTOR('',#14921,1.); +#14921 = DIRECTION('',(-0.,1.,-0.)); +#14922 = ORIENTED_EDGE('',*,*,#14775,.T.); +#14923 = PLANE('',#14924); +#14924 = AXIS2_PLACEMENT_3D('',#14925,#14926,#14927); +#14925 = CARTESIAN_POINT('',(-1.74,0.66,0.15)); +#14926 = DIRECTION('',(1.,0.,-0.)); +#14927 = DIRECTION('',(-0.,0.,-1.)); +#14928 = ADVANCED_FACE('',(#14929),#14947,.F.); +#14929 = FACE_BOUND('',#14930,.T.); +#14930 = EDGE_LOOP('',(#14931,#14939,#14940,#14941)); +#14931 = ORIENTED_EDGE('',*,*,#14932,.F.); +#14932 = EDGE_CURVE('',#14784,#14933,#14935,.T.); +#14933 = VERTEX_POINT('',#14934); +#14934 = CARTESIAN_POINT('',(-2.06,0.66,1.107155559798)); +#14935 = LINE('',#14936,#14937); +#14936 = CARTESIAN_POINT('',(-2.06,0.66,1.107155559798)); +#14937 = VECTOR('',#14938,1.); +#14938 = DIRECTION('',(0.,-1.,0.)); +#14939 = ORIENTED_EDGE('',*,*,#14783,.T.); +#14940 = ORIENTED_EDGE('',*,*,#14917,.F.); +#14941 = ORIENTED_EDGE('',*,*,#14942,.F.); +#14942 = EDGE_CURVE('',#14933,#14910,#14943,.T.); +#14943 = LINE('',#14944,#14945); +#14944 = CARTESIAN_POINT('',(-1.74,0.66,0.65014819764)); +#14945 = VECTOR('',#14946,1.); +#14946 = DIRECTION('',(0.573576436351,-0.,-0.819152044289)); +#14947 = PLANE('',#14948); +#14948 = AXIS2_PLACEMENT_3D('',#14949,#14950,#14951); +#14949 = CARTESIAN_POINT('',(-1.74,0.66,0.65014819764)); +#14950 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#14951 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#14952 = ADVANCED_FACE('',(#14953),#14971,.F.); +#14953 = FACE_BOUND('',#14954,.T.); +#14954 = EDGE_LOOP('',(#14955,#14963,#14964,#14965)); +#14955 = ORIENTED_EDGE('',*,*,#14956,.F.); +#14956 = EDGE_CURVE('',#14933,#14957,#14959,.T.); +#14957 = VERTEX_POINT('',#14958); +#14958 = CARTESIAN_POINT('',(-2.06,0.66,0.18)); +#14959 = LINE('',#14960,#14961); +#14960 = CARTESIAN_POINT('',(-2.06,0.66,0.)); +#14961 = VECTOR('',#14962,1.); +#14962 = DIRECTION('',(0.,0.,-1.)); +#14963 = ORIENTED_EDGE('',*,*,#14942,.T.); +#14964 = ORIENTED_EDGE('',*,*,#14909,.T.); +#14965 = ORIENTED_EDGE('',*,*,#14966,.F.); +#14966 = EDGE_CURVE('',#14957,#14902,#14967,.T.); +#14967 = LINE('',#14968,#14969); +#14968 = CARTESIAN_POINT('',(0.,0.66,0.18)); +#14969 = VECTOR('',#14970,1.); +#14970 = DIRECTION('',(1.,0.,0.)); +#14971 = PLANE('',#14972); +#14972 = AXIS2_PLACEMENT_3D('',#14973,#14974,#14975); +#14973 = CARTESIAN_POINT('',(0.,0.66,0.)); +#14974 = DIRECTION('',(0.,-1.,0.)); +#14975 = DIRECTION('',(0.,-0.,-1.)); +#14976 = ADVANCED_FACE('',(#14977),#15002,.F.); +#14977 = FACE_BOUND('',#14978,.T.); +#14978 = EDGE_LOOP('',(#14979,#14987,#14995,#15001)); +#14979 = ORIENTED_EDGE('',*,*,#14980,.F.); +#14980 = EDGE_CURVE('',#14981,#14840,#14983,.T.); +#14981 = VERTEX_POINT('',#14982); +#14982 = CARTESIAN_POINT('',(2.06,0.66,1.107155559798)); +#14983 = LINE('',#14984,#14985); +#14984 = CARTESIAN_POINT('',(2.06,0.66,1.107155559798)); +#14985 = VECTOR('',#14986,1.); +#14986 = DIRECTION('',(0.,1.,0.)); +#14987 = ORIENTED_EDGE('',*,*,#14988,.F.); +#14988 = EDGE_CURVE('',#14989,#14981,#14991,.T.); +#14989 = VERTEX_POINT('',#14990); +#14990 = CARTESIAN_POINT('',(1.74,0.66,0.65014819764)); +#14991 = LINE('',#14992,#14993); +#14992 = CARTESIAN_POINT('',(1.74,0.66,0.65014819764)); +#14993 = VECTOR('',#14994,1.); +#14994 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#14995 = ORIENTED_EDGE('',*,*,#14996,.T.); +#14996 = EDGE_CURVE('',#14989,#14848,#14997,.T.); +#14997 = LINE('',#14998,#14999); +#14998 = CARTESIAN_POINT('',(1.74,0.66,0.65014819764)); +#14999 = VECTOR('',#15000,1.); +#15000 = DIRECTION('',(-0.,1.,-0.)); +#15001 = ORIENTED_EDGE('',*,*,#14847,.T.); +#15002 = PLANE('',#15003); +#15003 = AXIS2_PLACEMENT_3D('',#15004,#15005,#15006); +#15004 = CARTESIAN_POINT('',(1.74,0.66,0.65014819764)); +#15005 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#15006 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#15007 = ADVANCED_FACE('',(#15008),#15026,.F.); +#15008 = FACE_BOUND('',#15009,.T.); +#15009 = EDGE_LOOP('',(#15010,#15018,#15019,#15020)); +#15010 = ORIENTED_EDGE('',*,*,#15011,.F.); +#15011 = EDGE_CURVE('',#14856,#15012,#15014,.T.); +#15012 = VERTEX_POINT('',#15013); +#15013 = CARTESIAN_POINT('',(1.74,0.66,0.18)); +#15014 = LINE('',#15015,#15016); +#15015 = CARTESIAN_POINT('',(1.74,0.66,0.18)); +#15016 = VECTOR('',#15017,1.); +#15017 = DIRECTION('',(0.,-1.,0.)); +#15018 = ORIENTED_EDGE('',*,*,#14855,.T.); +#15019 = ORIENTED_EDGE('',*,*,#14996,.F.); +#15020 = ORIENTED_EDGE('',*,*,#15021,.F.); +#15021 = EDGE_CURVE('',#15012,#14989,#15022,.T.); +#15022 = LINE('',#15023,#15024); +#15023 = CARTESIAN_POINT('',(1.74,0.66,0.15)); +#15024 = VECTOR('',#15025,1.); +#15025 = DIRECTION('',(0.,0.,1.)); +#15026 = PLANE('',#15027); +#15027 = AXIS2_PLACEMENT_3D('',#15028,#15029,#15030); +#15028 = CARTESIAN_POINT('',(1.74,0.66,0.15)); +#15029 = DIRECTION('',(-1.,0.,0.)); +#15030 = DIRECTION('',(0.,0.,1.)); +#15031 = ADVANCED_FACE('',(#15032),#15050,.F.); +#15032 = FACE_BOUND('',#15033,.T.); +#15033 = EDGE_LOOP('',(#15034,#15042,#15043,#15044)); +#15034 = ORIENTED_EDGE('',*,*,#15035,.F.); +#15035 = EDGE_CURVE('',#15012,#15036,#15038,.T.); +#15036 = VERTEX_POINT('',#15037); +#15037 = CARTESIAN_POINT('',(2.06,0.66,0.18)); +#15038 = LINE('',#15039,#15040); +#15039 = CARTESIAN_POINT('',(0.,0.66,0.18)); +#15040 = VECTOR('',#15041,1.); +#15041 = DIRECTION('',(1.,0.,0.)); +#15042 = ORIENTED_EDGE('',*,*,#15021,.T.); +#15043 = ORIENTED_EDGE('',*,*,#14988,.T.); +#15044 = ORIENTED_EDGE('',*,*,#15045,.F.); +#15045 = EDGE_CURVE('',#15036,#14981,#15046,.T.); +#15046 = LINE('',#15047,#15048); +#15047 = CARTESIAN_POINT('',(2.06,0.66,-5.690334968969E-16)); +#15048 = VECTOR('',#15049,1.); +#15049 = DIRECTION('',(2.762298528625E-16,0.,1.)); +#15050 = PLANE('',#15051); +#15051 = AXIS2_PLACEMENT_3D('',#15052,#15053,#15054); +#15052 = CARTESIAN_POINT('',(0.,0.66,0.)); +#15053 = DIRECTION('',(0.,-1.,0.)); +#15054 = DIRECTION('',(0.,-0.,-1.)); +#15055 = ADVANCED_FACE('',(#15056),#15081,.F.); +#15056 = FACE_BOUND('',#15057,.T.); +#15057 = EDGE_LOOP('',(#15058,#15066,#15074,#15080)); +#15058 = ORIENTED_EDGE('',*,*,#15059,.F.); +#15059 = EDGE_CURVE('',#15060,#14792,#15062,.T.); +#15060 = VERTEX_POINT('',#15061); +#15061 = CARTESIAN_POINT('',(-2.06,0.66,2.392844440202)); +#15062 = LINE('',#15063,#15064); +#15063 = CARTESIAN_POINT('',(-2.06,0.66,2.392844440202)); +#15064 = VECTOR('',#15065,1.); +#15065 = DIRECTION('',(0.,1.,0.)); +#15066 = ORIENTED_EDGE('',*,*,#15067,.F.); +#15067 = EDGE_CURVE('',#15068,#15060,#15070,.T.); +#15068 = VERTEX_POINT('',#15069); +#15069 = CARTESIAN_POINT('',(-1.74,0.66,2.84985180236)); +#15070 = LINE('',#15071,#15072); +#15071 = CARTESIAN_POINT('',(-1.74,0.66,2.84985180236)); +#15072 = VECTOR('',#15073,1.); +#15073 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#15074 = ORIENTED_EDGE('',*,*,#15075,.T.); +#15075 = EDGE_CURVE('',#15068,#14800,#15076,.T.); +#15076 = LINE('',#15077,#15078); +#15077 = CARTESIAN_POINT('',(-1.74,0.66,2.84985180236)); +#15078 = VECTOR('',#15079,1.); +#15079 = DIRECTION('',(-0.,1.,-0.)); +#15080 = ORIENTED_EDGE('',*,*,#14799,.T.); +#15081 = PLANE('',#15082); +#15082 = AXIS2_PLACEMENT_3D('',#15083,#15084,#15085); +#15083 = CARTESIAN_POINT('',(-1.74,0.66,2.84985180236)); +#15084 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#15085 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#15086 = ADVANCED_FACE('',(#15087),#15105,.F.); +#15087 = FACE_BOUND('',#15088,.T.); +#15088 = EDGE_LOOP('',(#15089,#15097,#15098,#15099)); +#15089 = ORIENTED_EDGE('',*,*,#15090,.F.); +#15090 = EDGE_CURVE('',#14808,#15091,#15093,.T.); +#15091 = VERTEX_POINT('',#15092); +#15092 = CARTESIAN_POINT('',(-1.74,0.66,3.32)); +#15093 = LINE('',#15094,#15095); +#15094 = CARTESIAN_POINT('',(-1.74,0.66,3.32)); +#15095 = VECTOR('',#15096,1.); +#15096 = DIRECTION('',(0.,-1.,0.)); +#15097 = ORIENTED_EDGE('',*,*,#14807,.T.); +#15098 = ORIENTED_EDGE('',*,*,#15075,.F.); +#15099 = ORIENTED_EDGE('',*,*,#15100,.F.); +#15100 = EDGE_CURVE('',#15091,#15068,#15101,.T.); +#15101 = LINE('',#15102,#15103); +#15102 = CARTESIAN_POINT('',(-1.74,0.66,3.35)); +#15103 = VECTOR('',#15104,1.); +#15104 = DIRECTION('',(0.,0.,-1.)); +#15105 = PLANE('',#15106); +#15106 = AXIS2_PLACEMENT_3D('',#15107,#15108,#15109); +#15107 = CARTESIAN_POINT('',(-1.74,0.66,3.35)); +#15108 = DIRECTION('',(1.,0.,0.)); +#15109 = DIRECTION('',(0.,0.,-1.)); +#15110 = ADVANCED_FACE('',(#15111),#15129,.F.); +#15111 = FACE_BOUND('',#15112,.T.); +#15112 = EDGE_LOOP('',(#15113,#15121,#15127,#15128)); +#15113 = ORIENTED_EDGE('',*,*,#15114,.F.); +#15114 = EDGE_CURVE('',#15115,#15060,#15117,.T.); +#15115 = VERTEX_POINT('',#15116); +#15116 = CARTESIAN_POINT('',(-2.06,0.66,3.32)); +#15117 = LINE('',#15118,#15119); +#15118 = CARTESIAN_POINT('',(-2.06,0.66,0.)); +#15119 = VECTOR('',#15120,1.); +#15120 = DIRECTION('',(0.,0.,-1.)); +#15121 = ORIENTED_EDGE('',*,*,#15122,.F.); +#15122 = EDGE_CURVE('',#15091,#15115,#15123,.T.); +#15123 = LINE('',#15124,#15125); +#15124 = CARTESIAN_POINT('',(0.,0.66,3.32)); +#15125 = VECTOR('',#15126,1.); +#15126 = DIRECTION('',(-1.,0.,0.)); +#15127 = ORIENTED_EDGE('',*,*,#15100,.T.); +#15128 = ORIENTED_EDGE('',*,*,#15067,.T.); +#15129 = PLANE('',#15130); +#15130 = AXIS2_PLACEMENT_3D('',#15131,#15132,#15133); +#15131 = CARTESIAN_POINT('',(0.,0.66,0.)); +#15132 = DIRECTION('',(0.,-1.,0.)); +#15133 = DIRECTION('',(0.,0.,-1.)); +#15134 = ADVANCED_FACE('',(#15135),#15160,.F.); +#15135 = FACE_BOUND('',#15136,.T.); +#15136 = EDGE_LOOP('',(#15137,#15145,#15153,#15159)); +#15137 = ORIENTED_EDGE('',*,*,#15138,.F.); +#15138 = EDGE_CURVE('',#15139,#14816,#15141,.T.); +#15139 = VERTEX_POINT('',#15140); +#15140 = CARTESIAN_POINT('',(1.74,0.66,3.32)); +#15141 = LINE('',#15142,#15143); +#15142 = CARTESIAN_POINT('',(1.74,0.66,3.32)); +#15143 = VECTOR('',#15144,1.); +#15144 = DIRECTION('',(0.,1.,-0.)); +#15145 = ORIENTED_EDGE('',*,*,#15146,.F.); +#15146 = EDGE_CURVE('',#15147,#15139,#15149,.T.); +#15147 = VERTEX_POINT('',#15148); +#15148 = CARTESIAN_POINT('',(1.74,0.66,2.84985180236)); +#15149 = LINE('',#15150,#15151); +#15150 = CARTESIAN_POINT('',(1.74,0.66,3.35)); +#15151 = VECTOR('',#15152,1.); +#15152 = DIRECTION('',(8.671047322381E-16,-0.,1.)); +#15153 = ORIENTED_EDGE('',*,*,#15154,.T.); +#15154 = EDGE_CURVE('',#15147,#14824,#15155,.T.); +#15155 = LINE('',#15156,#15157); +#15156 = CARTESIAN_POINT('',(1.74,0.66,2.84985180236)); +#15157 = VECTOR('',#15158,1.); +#15158 = DIRECTION('',(-0.,1.,-0.)); +#15159 = ORIENTED_EDGE('',*,*,#14823,.T.); +#15160 = PLANE('',#15161); +#15161 = AXIS2_PLACEMENT_3D('',#15162,#15163,#15164); +#15162 = CARTESIAN_POINT('',(1.74,0.66,3.35)); +#15163 = DIRECTION('',(-1.,0.,8.671047322381E-16)); +#15164 = DIRECTION('',(8.671047322381E-16,0.,1.)); +#15165 = ADVANCED_FACE('',(#15166),#15184,.F.); +#15166 = FACE_BOUND('',#15167,.T.); +#15167 = EDGE_LOOP('',(#15168,#15176,#15177,#15178)); +#15168 = ORIENTED_EDGE('',*,*,#15169,.F.); +#15169 = EDGE_CURVE('',#14832,#15170,#15172,.T.); +#15170 = VERTEX_POINT('',#15171); +#15171 = CARTESIAN_POINT('',(2.06,0.66,2.392844440202)); +#15172 = LINE('',#15173,#15174); +#15173 = CARTESIAN_POINT('',(2.06,0.66,2.392844440202)); +#15174 = VECTOR('',#15175,1.); +#15175 = DIRECTION('',(0.,-1.,0.)); +#15176 = ORIENTED_EDGE('',*,*,#14831,.T.); +#15177 = ORIENTED_EDGE('',*,*,#15154,.F.); +#15178 = ORIENTED_EDGE('',*,*,#15179,.F.); +#15179 = EDGE_CURVE('',#15170,#15147,#15180,.T.); +#15180 = LINE('',#15181,#15182); +#15181 = CARTESIAN_POINT('',(1.74,0.66,2.84985180236)); +#15182 = VECTOR('',#15183,1.); +#15183 = DIRECTION('',(-0.573576436351,-0.,0.819152044289)); +#15184 = PLANE('',#15185); +#15185 = AXIS2_PLACEMENT_3D('',#15186,#15187,#15188); +#15186 = CARTESIAN_POINT('',(1.74,0.66,2.84985180236)); +#15187 = DIRECTION('',(-0.819152044289,0.,-0.573576436351)); +#15188 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#15189 = ADVANCED_FACE('',(#15190),#15208,.T.); +#15190 = FACE_BOUND('',#15191,.T.); +#15191 = EDGE_LOOP('',(#15192,#15200,#15206,#15207)); +#15192 = ORIENTED_EDGE('',*,*,#15193,.T.); +#15193 = EDGE_CURVE('',#15139,#15194,#15196,.T.); +#15194 = VERTEX_POINT('',#15195); +#15195 = CARTESIAN_POINT('',(2.06,0.66,3.32)); +#15196 = LINE('',#15197,#15198); +#15197 = CARTESIAN_POINT('',(0.,0.66,3.32)); +#15198 = VECTOR('',#15199,1.); +#15199 = DIRECTION('',(1.,0.,0.)); +#15200 = ORIENTED_EDGE('',*,*,#15201,.T.); +#15201 = EDGE_CURVE('',#15194,#15170,#15202,.T.); +#15202 = LINE('',#15203,#15204); +#15203 = CARTESIAN_POINT('',(2.06,0.66,-5.690334968969E-16)); +#15204 = VECTOR('',#15205,1.); +#15205 = DIRECTION('',(-2.762298528625E-16,0.,-1.)); +#15206 = ORIENTED_EDGE('',*,*,#15179,.T.); +#15207 = ORIENTED_EDGE('',*,*,#15146,.T.); +#15208 = PLANE('',#15209); +#15209 = AXIS2_PLACEMENT_3D('',#15210,#15211,#15212); +#15210 = CARTESIAN_POINT('',(0.,0.66,0.)); +#15211 = DIRECTION('',(0.,1.,0.)); +#15212 = DIRECTION('',(0.,-0.,1.)); +#15213 = ADVANCED_FACE('',(#15214),#15240,.F.); +#15214 = FACE_BOUND('',#15215,.F.); +#15215 = EDGE_LOOP('',(#15216,#15224,#15233,#15239)); +#15216 = ORIENTED_EDGE('',*,*,#15217,.F.); +#15217 = EDGE_CURVE('',#15218,#14628,#15220,.T.); +#15218 = VERTEX_POINT('',#15219); +#15219 = CARTESIAN_POINT('',(-0.8,0.66,0.95)); +#15220 = LINE('',#15221,#15222); +#15221 = CARTESIAN_POINT('',(-0.8,0.66,0.95)); +#15222 = VECTOR('',#15223,1.); +#15223 = DIRECTION('',(-0.,1.,-0.)); +#15224 = ORIENTED_EDGE('',*,*,#15225,.T.); +#15225 = EDGE_CURVE('',#15218,#15226,#15228,.T.); +#15226 = VERTEX_POINT('',#15227); +#15227 = CARTESIAN_POINT('',(-0.8,0.66,2.55)); +#15228 = CIRCLE('',#15229,0.8); +#15229 = AXIS2_PLACEMENT_3D('',#15230,#15231,#15232); +#15230 = CARTESIAN_POINT('',(-0.8,0.66,1.75)); +#15231 = DIRECTION('',(0.,1.,0.)); +#15232 = DIRECTION('',(0.,-0.,1.)); +#15233 = ORIENTED_EDGE('',*,*,#15234,.T.); +#15234 = EDGE_CURVE('',#15226,#14618,#15235,.T.); +#15235 = LINE('',#15236,#15237); +#15236 = CARTESIAN_POINT('',(-0.8,0.66,2.55)); +#15237 = VECTOR('',#15238,1.); +#15238 = DIRECTION('',(-0.,1.,-0.)); +#15239 = ORIENTED_EDGE('',*,*,#14627,.F.); +#15240 = CYLINDRICAL_SURFACE('',#15241,0.8); +#15241 = AXIS2_PLACEMENT_3D('',#15242,#15243,#15244); +#15242 = CARTESIAN_POINT('',(-0.8,0.66,1.75)); +#15243 = DIRECTION('',(-0.,1.,-0.)); +#15244 = DIRECTION('',(0.,0.,1.)); +#15245 = ADVANCED_FACE('',(#15246),#15264,.F.); +#15246 = FACE_BOUND('',#15247,.T.); +#15247 = EDGE_LOOP('',(#15248,#15249,#15250,#15258)); +#15248 = ORIENTED_EDGE('',*,*,#14636,.T.); +#15249 = ORIENTED_EDGE('',*,*,#15217,.F.); +#15250 = ORIENTED_EDGE('',*,*,#15251,.F.); +#15251 = EDGE_CURVE('',#15252,#15218,#15254,.T.); +#15252 = VERTEX_POINT('',#15253); +#15253 = CARTESIAN_POINT('',(0.8,0.66,0.95)); +#15254 = LINE('',#15255,#15256); +#15255 = CARTESIAN_POINT('',(-0.8,0.66,0.95)); +#15256 = VECTOR('',#15257,1.); +#15257 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#15258 = ORIENTED_EDGE('',*,*,#15259,.T.); +#15259 = EDGE_CURVE('',#15252,#14637,#15260,.T.); +#15260 = LINE('',#15261,#15262); +#15261 = CARTESIAN_POINT('',(0.8,0.66,0.95)); +#15262 = VECTOR('',#15263,1.); +#15263 = DIRECTION('',(-0.,1.,-0.)); +#15264 = PLANE('',#15265); +#15265 = AXIS2_PLACEMENT_3D('',#15266,#15267,#15268); +#15266 = CARTESIAN_POINT('',(-0.8,0.66,0.95)); +#15267 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#15268 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#15269 = ADVANCED_FACE('',(#15270),#15289,.F.); +#15270 = FACE_BOUND('',#15271,.F.); +#15271 = EDGE_LOOP('',(#15272,#15280,#15287,#15288)); +#15272 = ORIENTED_EDGE('',*,*,#15273,.F.); +#15273 = EDGE_CURVE('',#15274,#14620,#15276,.T.); +#15274 = VERTEX_POINT('',#15275); +#15275 = CARTESIAN_POINT('',(0.8,0.66,2.55)); +#15276 = LINE('',#15277,#15278); +#15277 = CARTESIAN_POINT('',(0.8,0.66,2.55)); +#15278 = VECTOR('',#15279,1.); +#15279 = DIRECTION('',(-0.,1.,-0.)); +#15280 = ORIENTED_EDGE('',*,*,#15281,.T.); +#15281 = EDGE_CURVE('',#15274,#15252,#15282,.T.); +#15282 = CIRCLE('',#15283,0.8); +#15283 = AXIS2_PLACEMENT_3D('',#15284,#15285,#15286); +#15284 = CARTESIAN_POINT('',(0.8,0.66,1.75)); +#15285 = DIRECTION('',(0.,1.,0.)); +#15286 = DIRECTION('',(0.,-0.,1.)); +#15287 = ORIENTED_EDGE('',*,*,#15259,.T.); +#15288 = ORIENTED_EDGE('',*,*,#14644,.F.); +#15289 = CYLINDRICAL_SURFACE('',#15290,0.8); +#15290 = AXIS2_PLACEMENT_3D('',#15291,#15292,#15293); +#15291 = CARTESIAN_POINT('',(0.8,0.66,1.75)); +#15292 = DIRECTION('',(-0.,1.,-0.)); +#15293 = DIRECTION('',(0.,0.,1.)); +#15294 = ADVANCED_FACE('',(#15295),#15306,.F.); +#15295 = FACE_BOUND('',#15296,.T.); +#15296 = EDGE_LOOP('',(#15297,#15298,#15299,#15305)); +#15297 = ORIENTED_EDGE('',*,*,#14617,.T.); +#15298 = ORIENTED_EDGE('',*,*,#15273,.F.); +#15299 = ORIENTED_EDGE('',*,*,#15300,.F.); +#15300 = EDGE_CURVE('',#15226,#15274,#15301,.T.); +#15301 = LINE('',#15302,#15303); +#15302 = CARTESIAN_POINT('',(-0.8,0.66,2.55)); +#15303 = VECTOR('',#15304,1.); +#15304 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#15305 = ORIENTED_EDGE('',*,*,#15234,.T.); +#15306 = PLANE('',#15307); +#15307 = AXIS2_PLACEMENT_3D('',#15308,#15309,#15310); +#15308 = CARTESIAN_POINT('',(-0.8,0.66,2.55)); +#15309 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#15310 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#15311 = ADVANCED_FACE('',(#15312,#15322,#15332,#15342),#15348,.T.); +#15312 = FACE_BOUND('',#15313,.T.); +#15313 = EDGE_LOOP('',(#15314,#15321)); +#15314 = ORIENTED_EDGE('',*,*,#15315,.F.); +#15315 = EDGE_CURVE('',#13844,#13852,#15316,.T.); +#15316 = CIRCLE('',#15317,0.25); +#15317 = AXIS2_PLACEMENT_3D('',#15318,#15319,#15320); +#15318 = CARTESIAN_POINT('',(1.2,0.66,1.75)); +#15319 = DIRECTION('',(0.,1.,0.)); +#15320 = DIRECTION('',(0.,-0.,1.)); +#15321 = ORIENTED_EDGE('',*,*,#13851,.F.); +#15322 = FACE_BOUND('',#15323,.T.); +#15323 = EDGE_LOOP('',(#15324,#15331)); +#15324 = ORIENTED_EDGE('',*,*,#15325,.F.); +#15325 = EDGE_CURVE('',#13886,#13894,#15326,.T.); +#15326 = CIRCLE('',#15327,0.25); +#15327 = AXIS2_PLACEMENT_3D('',#15328,#15329,#15330); +#15328 = CARTESIAN_POINT('',(-1.2,0.66,1.75)); +#15329 = DIRECTION('',(0.,1.,0.)); +#15330 = DIRECTION('',(0.,-0.,1.)); +#15331 = ORIENTED_EDGE('',*,*,#13893,.F.); +#15332 = FACE_BOUND('',#15333,.T.); +#15333 = EDGE_LOOP('',(#15334,#15341)); +#15334 = ORIENTED_EDGE('',*,*,#15335,.F.); +#15335 = EDGE_CURVE('',#13928,#13936,#15336,.T.); +#15336 = CIRCLE('',#15337,0.25); +#15337 = AXIS2_PLACEMENT_3D('',#15338,#15339,#15340); +#15338 = CARTESIAN_POINT('',(1.192622389734E-15,0.66,1.75)); +#15339 = DIRECTION('',(0.,1.,0.)); +#15340 = DIRECTION('',(0.,-0.,1.)); +#15341 = ORIENTED_EDGE('',*,*,#13935,.F.); +#15342 = FACE_BOUND('',#15343,.T.); +#15343 = EDGE_LOOP('',(#15344,#15345,#15346,#15347)); +#15344 = ORIENTED_EDGE('',*,*,#15225,.T.); +#15345 = ORIENTED_EDGE('',*,*,#15300,.T.); +#15346 = ORIENTED_EDGE('',*,*,#15281,.T.); +#15347 = ORIENTED_EDGE('',*,*,#15251,.T.); +#15348 = PLANE('',#15349); +#15349 = AXIS2_PLACEMENT_3D('',#15350,#15351,#15352); +#15350 = CARTESIAN_POINT('',(-0.8,0.66,1.75)); +#15351 = DIRECTION('',(0.,1.,0.)); +#15352 = DIRECTION('',(0.,-0.,1.)); +#15353 = ADVANCED_FACE('',(#15354),#15452,.T.); +#15354 = FACE_BOUND('',#15355,.T.); +#15355 = EDGE_LOOP('',(#15356,#15364,#15372,#15378,#15379,#15380,#15381, + #15389,#15397,#15403,#15404,#15405,#15406,#15414,#15422,#15428, + #15429,#15437,#15445,#15451)); +#15356 = ORIENTED_EDGE('',*,*,#15357,.F.); +#15357 = EDGE_CURVE('',#15358,#14664,#15360,.T.); +#15358 = VERTEX_POINT('',#15359); +#15359 = CARTESIAN_POINT('',(0.85,1.345,0.18)); +#15360 = LINE('',#15361,#15362); +#15361 = CARTESIAN_POINT('',(0.85,0.36,0.18)); +#15362 = VECTOR('',#15363,1.); +#15363 = DIRECTION('',(0.,1.,0.)); +#15364 = ORIENTED_EDGE('',*,*,#15365,.F.); +#15365 = EDGE_CURVE('',#15366,#15358,#15368,.T.); +#15366 = VERTEX_POINT('',#15367); +#15367 = CARTESIAN_POINT('',(1.5,1.345,0.18)); +#15368 = LINE('',#15369,#15370); +#15369 = CARTESIAN_POINT('',(0.,1.345,0.18)); +#15370 = VECTOR('',#15371,1.); +#15371 = DIRECTION('',(-1.,-0.,-0.)); +#15372 = ORIENTED_EDGE('',*,*,#15373,.F.); +#15373 = EDGE_CURVE('',#14864,#15366,#15374,.T.); +#15374 = LINE('',#15375,#15376); +#15375 = CARTESIAN_POINT('',(1.5,0.36,0.18)); +#15376 = VECTOR('',#15377,1.); +#15377 = DIRECTION('',(0.,-1.,0.)); +#15378 = ORIENTED_EDGE('',*,*,#14863,.F.); +#15379 = ORIENTED_EDGE('',*,*,#15011,.T.); +#15380 = ORIENTED_EDGE('',*,*,#15035,.T.); +#15381 = ORIENTED_EDGE('',*,*,#15382,.F.); +#15382 = EDGE_CURVE('',#15383,#15036,#15385,.T.); +#15383 = VERTEX_POINT('',#15384); +#15384 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15385 = LINE('',#15386,#15387); +#15386 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15387 = VECTOR('',#15388,1.); +#15388 = DIRECTION('',(-0.,1.,-0.)); +#15389 = ORIENTED_EDGE('',*,*,#15390,.T.); +#15390 = EDGE_CURVE('',#15383,#15391,#15393,.T.); +#15391 = VERTEX_POINT('',#15392); +#15392 = CARTESIAN_POINT('',(-2.06,0.36,0.18)); +#15393 = LINE('',#15394,#15395); +#15394 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15395 = VECTOR('',#15396,1.); +#15396 = DIRECTION('',(-1.,0.,0.)); +#15397 = ORIENTED_EDGE('',*,*,#15398,.T.); +#15398 = EDGE_CURVE('',#15391,#14957,#15399,.T.); +#15399 = LINE('',#15400,#15401); +#15400 = CARTESIAN_POINT('',(-2.06,0.36,0.18)); +#15401 = VECTOR('',#15402,1.); +#15402 = DIRECTION('',(-0.,1.,-0.)); +#15403 = ORIENTED_EDGE('',*,*,#14966,.T.); +#15404 = ORIENTED_EDGE('',*,*,#14901,.T.); +#15405 = ORIENTED_EDGE('',*,*,#14767,.F.); +#15406 = ORIENTED_EDGE('',*,*,#15407,.F.); +#15407 = EDGE_CURVE('',#15408,#14760,#15410,.T.); +#15408 = VERTEX_POINT('',#15409); +#15409 = CARTESIAN_POINT('',(-1.5,1.345,0.18)); +#15410 = LINE('',#15411,#15412); +#15411 = CARTESIAN_POINT('',(-1.5,0.36,0.18)); +#15412 = VECTOR('',#15413,1.); +#15413 = DIRECTION('',(0.,1.,0.)); +#15414 = ORIENTED_EDGE('',*,*,#15415,.F.); +#15415 = EDGE_CURVE('',#15416,#15408,#15418,.T.); +#15416 = VERTEX_POINT('',#15417); +#15417 = CARTESIAN_POINT('',(-0.85,1.345,0.18)); +#15418 = LINE('',#15419,#15420); +#15419 = CARTESIAN_POINT('',(0.,1.345,0.18)); +#15420 = VECTOR('',#15421,1.); +#15421 = DIRECTION('',(-1.,-0.,-0.)); +#15422 = ORIENTED_EDGE('',*,*,#15423,.F.); +#15423 = EDGE_CURVE('',#14720,#15416,#15424,.T.); +#15424 = LINE('',#15425,#15426); +#15425 = CARTESIAN_POINT('',(-0.85,0.36,0.18)); +#15426 = VECTOR('',#15427,1.); +#15427 = DIRECTION('',(0.,-1.,0.)); +#15428 = ORIENTED_EDGE('',*,*,#14719,.F.); +#15429 = ORIENTED_EDGE('',*,*,#15430,.F.); +#15430 = EDGE_CURVE('',#15431,#14712,#15433,.T.); +#15431 = VERTEX_POINT('',#15432); +#15432 = CARTESIAN_POINT('',(-0.25,1.345,0.18)); +#15433 = LINE('',#15434,#15435); +#15434 = CARTESIAN_POINT('',(-0.25,0.36,0.18)); +#15435 = VECTOR('',#15436,1.); +#15436 = DIRECTION('',(0.,1.,0.)); +#15437 = ORIENTED_EDGE('',*,*,#15438,.F.); +#15438 = EDGE_CURVE('',#15439,#15431,#15441,.T.); +#15439 = VERTEX_POINT('',#15440); +#15440 = CARTESIAN_POINT('',(0.25,1.345,0.18)); +#15441 = LINE('',#15442,#15443); +#15442 = CARTESIAN_POINT('',(0.,1.345,0.18)); +#15443 = VECTOR('',#15444,1.); +#15444 = DIRECTION('',(-1.,-0.,-0.)); +#15445 = ORIENTED_EDGE('',*,*,#15446,.F.); +#15446 = EDGE_CURVE('',#14672,#15439,#15447,.T.); +#15447 = LINE('',#15448,#15449); +#15448 = CARTESIAN_POINT('',(0.25,0.36,0.18)); +#15449 = VECTOR('',#15450,1.); +#15450 = DIRECTION('',(0.,-1.,0.)); +#15451 = ORIENTED_EDGE('',*,*,#14671,.F.); +#15452 = PLANE('',#15453); +#15453 = AXIS2_PLACEMENT_3D('',#15454,#15455,#15456); +#15454 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15455 = DIRECTION('',(-0.,0.,-1.)); +#15456 = DIRECTION('',(-1.,0.,0.)); +#15457 = ADVANCED_FACE('',(#15458),#15480,.T.); +#15458 = FACE_BOUND('',#15459,.T.); +#15459 = EDGE_LOOP('',(#15460,#15461,#15462,#15463,#15471,#15477,#15478, + #15479)); +#15460 = ORIENTED_EDGE('',*,*,#14932,.T.); +#15461 = ORIENTED_EDGE('',*,*,#14956,.T.); +#15462 = ORIENTED_EDGE('',*,*,#15398,.F.); +#15463 = ORIENTED_EDGE('',*,*,#15464,.T.); +#15464 = EDGE_CURVE('',#15391,#15465,#15467,.T.); +#15465 = VERTEX_POINT('',#15466); +#15466 = CARTESIAN_POINT('',(-2.06,0.36,3.32)); +#15467 = LINE('',#15468,#15469); +#15468 = CARTESIAN_POINT('',(-2.06,0.36,0.18)); +#15469 = VECTOR('',#15470,1.); +#15470 = DIRECTION('',(0.,0.,1.)); +#15471 = ORIENTED_EDGE('',*,*,#15472,.T.); +#15472 = EDGE_CURVE('',#15465,#15115,#15473,.T.); +#15473 = LINE('',#15474,#15475); +#15474 = CARTESIAN_POINT('',(-2.06,0.36,3.32)); +#15475 = VECTOR('',#15476,1.); +#15476 = DIRECTION('',(-0.,1.,-0.)); +#15477 = ORIENTED_EDGE('',*,*,#15114,.T.); +#15478 = ORIENTED_EDGE('',*,*,#15059,.T.); +#15479 = ORIENTED_EDGE('',*,*,#14791,.F.); +#15480 = PLANE('',#15481); +#15481 = AXIS2_PLACEMENT_3D('',#15482,#15483,#15484); +#15482 = CARTESIAN_POINT('',(-2.06,0.36,0.18)); +#15483 = DIRECTION('',(-1.,0.,0.)); +#15484 = DIRECTION('',(0.,0.,1.)); +#15485 = ADVANCED_FACE('',(#15486),#15508,.T.); +#15486 = FACE_BOUND('',#15487,.T.); +#15487 = EDGE_LOOP('',(#15488,#15489,#15490,#15491,#15492,#15500,#15506, + #15507)); +#15488 = ORIENTED_EDGE('',*,*,#14980,.T.); +#15489 = ORIENTED_EDGE('',*,*,#14839,.F.); +#15490 = ORIENTED_EDGE('',*,*,#15169,.T.); +#15491 = ORIENTED_EDGE('',*,*,#15201,.F.); +#15492 = ORIENTED_EDGE('',*,*,#15493,.F.); +#15493 = EDGE_CURVE('',#15494,#15194,#15496,.T.); +#15494 = VERTEX_POINT('',#15495); +#15495 = CARTESIAN_POINT('',(2.06,0.36,3.32)); +#15496 = LINE('',#15497,#15498); +#15497 = CARTESIAN_POINT('',(2.06,0.36,3.32)); +#15498 = VECTOR('',#15499,1.); +#15499 = DIRECTION('',(-0.,1.,-0.)); +#15500 = ORIENTED_EDGE('',*,*,#15501,.T.); +#15501 = EDGE_CURVE('',#15494,#15383,#15502,.T.); +#15502 = LINE('',#15503,#15504); +#15503 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15504 = VECTOR('',#15505,1.); +#15505 = DIRECTION('',(-2.762298528625E-16,-0.,-1.)); +#15506 = ORIENTED_EDGE('',*,*,#15382,.T.); +#15507 = ORIENTED_EDGE('',*,*,#15045,.T.); +#15508 = PLANE('',#15509); +#15509 = AXIS2_PLACEMENT_3D('',#15510,#15511,#15512); +#15510 = CARTESIAN_POINT('',(2.06,0.36,0.18)); +#15511 = DIRECTION('',(1.,0.,-2.762298528625E-16)); +#15512 = DIRECTION('',(-2.762298528625E-16,0.,-1.)); +#15513 = ADVANCED_FACE('',(#15514),#15529,.T.); +#15514 = FACE_BOUND('',#15515,.T.); +#15515 = EDGE_LOOP('',(#15516,#15517,#15518,#15519,#15525,#15526,#15527, + #15528)); +#15516 = ORIENTED_EDGE('',*,*,#15090,.T.); +#15517 = ORIENTED_EDGE('',*,*,#15122,.T.); +#15518 = ORIENTED_EDGE('',*,*,#15472,.F.); +#15519 = ORIENTED_EDGE('',*,*,#15520,.T.); +#15520 = EDGE_CURVE('',#15465,#15494,#15521,.T.); +#15521 = LINE('',#15522,#15523); +#15522 = CARTESIAN_POINT('',(2.06,0.36,3.32)); +#15523 = VECTOR('',#15524,1.); +#15524 = DIRECTION('',(1.,-0.,-0.)); +#15525 = ORIENTED_EDGE('',*,*,#15493,.T.); +#15526 = ORIENTED_EDGE('',*,*,#15193,.F.); +#15527 = ORIENTED_EDGE('',*,*,#15138,.T.); +#15528 = ORIENTED_EDGE('',*,*,#14815,.F.); +#15529 = PLANE('',#15530); +#15530 = AXIS2_PLACEMENT_3D('',#15531,#15532,#15533); +#15531 = CARTESIAN_POINT('',(2.06,0.36,3.32)); +#15532 = DIRECTION('',(0.,0.,1.)); +#15533 = DIRECTION('',(1.,0.,-0.)); +#15534 = ADVANCED_FACE('',(#15535,#15581),#15587,.F.); +#15535 = FACE_BOUND('',#15536,.T.); +#15536 = EDGE_LOOP('',(#15537,#15547,#15553,#15554,#15560,#15561,#15567, + #15568,#15574,#15575)); +#15537 = ORIENTED_EDGE('',*,*,#15538,.T.); +#15538 = EDGE_CURVE('',#15539,#15541,#15543,.T.); +#15539 = VERTEX_POINT('',#15540); +#15540 = CARTESIAN_POINT('',(-2.09,0.36,3.35)); +#15541 = VERTEX_POINT('',#15542); +#15542 = CARTESIAN_POINT('',(2.09,0.36,3.35)); +#15543 = LINE('',#15544,#15545); +#15544 = CARTESIAN_POINT('',(0.,0.36,3.35)); +#15545 = VECTOR('',#15546,1.); +#15546 = DIRECTION('',(1.,0.,0.)); +#15547 = ORIENTED_EDGE('',*,*,#15548,.F.); +#15548 = EDGE_CURVE('',#14238,#15541,#15549,.T.); +#15549 = LINE('',#15550,#15551); +#15550 = CARTESIAN_POINT('',(2.09,0.36,3.35)); +#15551 = VECTOR('',#15552,1.); +#15552 = DIRECTION('',(0.,0.,1.)); +#15553 = ORIENTED_EDGE('',*,*,#14237,.F.); +#15554 = ORIENTED_EDGE('',*,*,#15555,.F.); +#15555 = EDGE_CURVE('',#14366,#14230,#15556,.T.); +#15556 = LINE('',#15557,#15558); +#15557 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#15558 = VECTOR('',#15559,1.); +#15559 = DIRECTION('',(1.,0.,0.)); +#15560 = ORIENTED_EDGE('',*,*,#14365,.F.); +#15561 = ORIENTED_EDGE('',*,*,#15562,.F.); +#15562 = EDGE_CURVE('',#14318,#14358,#15563,.T.); +#15563 = LINE('',#15564,#15565); +#15564 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#15565 = VECTOR('',#15566,1.); +#15566 = DIRECTION('',(1.,0.,0.)); +#15567 = ORIENTED_EDGE('',*,*,#14317,.F.); +#15568 = ORIENTED_EDGE('',*,*,#15569,.F.); +#15569 = EDGE_CURVE('',#14270,#14310,#15570,.T.); +#15570 = LINE('',#15571,#15572); +#15571 = CARTESIAN_POINT('',(0.,0.36,0.15)); +#15572 = VECTOR('',#15573,1.); +#15573 = DIRECTION('',(1.,0.,0.)); +#15574 = ORIENTED_EDGE('',*,*,#14269,.F.); +#15575 = ORIENTED_EDGE('',*,*,#15576,.F.); +#15576 = EDGE_CURVE('',#15539,#14262,#15577,.T.); +#15577 = LINE('',#15578,#15579); +#15578 = CARTESIAN_POINT('',(-2.09,0.36,3.35)); +#15579 = VECTOR('',#15580,1.); +#15580 = DIRECTION('',(0.,0.,-1.)); +#15581 = FACE_BOUND('',#15582,.T.); +#15582 = EDGE_LOOP('',(#15583,#15584,#15585,#15586)); +#15583 = ORIENTED_EDGE('',*,*,#15464,.F.); +#15584 = ORIENTED_EDGE('',*,*,#15390,.F.); +#15585 = ORIENTED_EDGE('',*,*,#15501,.F.); +#15586 = ORIENTED_EDGE('',*,*,#15520,.F.); +#15587 = PLANE('',#15588); +#15588 = AXIS2_PLACEMENT_3D('',#15589,#15590,#15591); +#15589 = CARTESIAN_POINT('',(0.,0.36,0.)); +#15590 = DIRECTION('',(0.,-1.,0.)); +#15591 = DIRECTION('',(0.,-0.,-1.)); +#15592 = ADVANCED_FACE('',(#15593),#15627,.F.); +#15593 = FACE_BOUND('',#15594,.T.); +#15594 = EDGE_LOOP('',(#15595,#15605,#15613,#15621)); +#15595 = ORIENTED_EDGE('',*,*,#15596,.T.); +#15596 = EDGE_CURVE('',#15597,#15599,#15601,.T.); +#15597 = VERTEX_POINT('',#15598); +#15598 = CARTESIAN_POINT('',(-0.6,-1.05,0.25)); +#15599 = VERTEX_POINT('',#15600); +#15600 = CARTESIAN_POINT('',(-1.19,-1.05,0.95)); +#15601 = LINE('',#15602,#15603); +#15602 = CARTESIAN_POINT('',(-1.19,-1.05,0.95)); +#15603 = VECTOR('',#15604,1.); +#15604 = DIRECTION('',(-0.644472056026,-0.,0.764627863082)); +#15605 = ORIENTED_EDGE('',*,*,#15606,.F.); +#15606 = EDGE_CURVE('',#15607,#15599,#15609,.T.); +#15607 = VERTEX_POINT('',#15608); +#15608 = CARTESIAN_POINT('',(-1.19,-0.35,0.95)); +#15609 = LINE('',#15610,#15611); +#15610 = CARTESIAN_POINT('',(-1.19,-0.35,0.95)); +#15611 = VECTOR('',#15612,1.); +#15612 = DIRECTION('',(-0.,-1.,-0.)); +#15613 = ORIENTED_EDGE('',*,*,#15614,.F.); +#15614 = EDGE_CURVE('',#15615,#15607,#15617,.T.); +#15615 = VERTEX_POINT('',#15616); +#15616 = CARTESIAN_POINT('',(-0.6,-0.35,0.25)); +#15617 = LINE('',#15618,#15619); +#15618 = CARTESIAN_POINT('',(-1.19,-0.35,0.95)); +#15619 = VECTOR('',#15620,1.); +#15620 = DIRECTION('',(-0.644472056026,-0.,0.764627863082)); +#15621 = ORIENTED_EDGE('',*,*,#15622,.T.); +#15622 = EDGE_CURVE('',#15615,#15597,#15623,.T.); +#15623 = LINE('',#15624,#15625); +#15624 = CARTESIAN_POINT('',(-0.6,-0.35,0.25)); +#15625 = VECTOR('',#15626,1.); +#15626 = DIRECTION('',(-0.,-1.,-0.)); +#15627 = PLANE('',#15628); +#15628 = AXIS2_PLACEMENT_3D('',#15629,#15630,#15631); +#15629 = CARTESIAN_POINT('',(-1.19,-0.35,0.95)); +#15630 = DIRECTION('',(0.764627863082,-0.,0.644472056026)); +#15631 = DIRECTION('',(0.644472056026,0.,-0.764627863082)); +#15632 = ADVANCED_FACE('',(#15633),#15658,.F.); +#15633 = FACE_BOUND('',#15634,.T.); +#15634 = EDGE_LOOP('',(#15635,#15643,#15644,#15652)); +#15635 = ORIENTED_EDGE('',*,*,#15636,.T.); +#15636 = EDGE_CURVE('',#15637,#15597,#15639,.T.); +#15637 = VERTEX_POINT('',#15638); +#15638 = CARTESIAN_POINT('',(0.6,-1.05,0.25)); +#15639 = LINE('',#15640,#15641); +#15640 = CARTESIAN_POINT('',(-0.6,-1.05,0.25)); +#15641 = VECTOR('',#15642,1.); +#15642 = DIRECTION('',(-1.,-0.,-0.)); +#15643 = ORIENTED_EDGE('',*,*,#15622,.F.); +#15644 = ORIENTED_EDGE('',*,*,#15645,.F.); +#15645 = EDGE_CURVE('',#15646,#15615,#15648,.T.); +#15646 = VERTEX_POINT('',#15647); +#15647 = CARTESIAN_POINT('',(0.6,-0.35,0.25)); +#15648 = LINE('',#15649,#15650); +#15649 = CARTESIAN_POINT('',(-0.6,-0.35,0.25)); +#15650 = VECTOR('',#15651,1.); +#15651 = DIRECTION('',(-1.,-0.,-0.)); +#15652 = ORIENTED_EDGE('',*,*,#15653,.T.); +#15653 = EDGE_CURVE('',#15646,#15637,#15654,.T.); +#15654 = LINE('',#15655,#15656); +#15655 = CARTESIAN_POINT('',(0.6,-0.35,0.25)); +#15656 = VECTOR('',#15657,1.); +#15657 = DIRECTION('',(-0.,-1.,-0.)); +#15658 = PLANE('',#15659); +#15659 = AXIS2_PLACEMENT_3D('',#15660,#15661,#15662); +#15660 = CARTESIAN_POINT('',(-0.6,-0.35,0.25)); +#15661 = DIRECTION('',(0.,0.,1.)); +#15662 = DIRECTION('',(1.,0.,-0.)); +#15663 = ADVANCED_FACE('',(#15664),#15689,.F.); +#15664 = FACE_BOUND('',#15665,.T.); +#15665 = EDGE_LOOP('',(#15666,#15674,#15675,#15683)); +#15666 = ORIENTED_EDGE('',*,*,#15667,.T.); +#15667 = EDGE_CURVE('',#15668,#15637,#15670,.T.); +#15668 = VERTEX_POINT('',#15669); +#15669 = CARTESIAN_POINT('',(1.19,-1.05,0.95)); +#15670 = LINE('',#15671,#15672); +#15671 = CARTESIAN_POINT('',(0.6,-1.05,0.25)); +#15672 = VECTOR('',#15673,1.); +#15673 = DIRECTION('',(-0.644472056026,-0.,-0.764627863082)); +#15674 = ORIENTED_EDGE('',*,*,#15653,.F.); +#15675 = ORIENTED_EDGE('',*,*,#15676,.F.); +#15676 = EDGE_CURVE('',#15677,#15646,#15679,.T.); +#15677 = VERTEX_POINT('',#15678); +#15678 = CARTESIAN_POINT('',(1.19,-0.35,0.95)); +#15679 = LINE('',#15680,#15681); +#15680 = CARTESIAN_POINT('',(0.6,-0.35,0.25)); +#15681 = VECTOR('',#15682,1.); +#15682 = DIRECTION('',(-0.644472056026,-0.,-0.764627863082)); +#15683 = ORIENTED_EDGE('',*,*,#15684,.T.); +#15684 = EDGE_CURVE('',#15677,#15668,#15685,.T.); +#15685 = LINE('',#15686,#15687); +#15686 = CARTESIAN_POINT('',(1.19,-0.35,0.95)); +#15687 = VECTOR('',#15688,1.); +#15688 = DIRECTION('',(-0.,-1.,-0.)); +#15689 = PLANE('',#15690); +#15690 = AXIS2_PLACEMENT_3D('',#15691,#15692,#15693); +#15691 = CARTESIAN_POINT('',(0.6,-0.35,0.25)); +#15692 = DIRECTION('',(-0.764627863082,0.,0.644472056026)); +#15693 = DIRECTION('',(0.644472056026,0.,0.764627863082)); +#15694 = ADVANCED_FACE('',(#15695),#15720,.F.); +#15695 = FACE_BOUND('',#15696,.T.); +#15696 = EDGE_LOOP('',(#15697,#15705,#15706,#15714)); +#15697 = ORIENTED_EDGE('',*,*,#15698,.T.); +#15698 = EDGE_CURVE('',#15699,#15668,#15701,.T.); +#15699 = VERTEX_POINT('',#15700); +#15700 = CARTESIAN_POINT('',(2.09,-1.05,0.95)); +#15701 = LINE('',#15702,#15703); +#15702 = CARTESIAN_POINT('',(1.19,-1.05,0.95)); +#15703 = VECTOR('',#15704,1.); +#15704 = DIRECTION('',(-1.,-0.,1.204669080539E-16)); +#15705 = ORIENTED_EDGE('',*,*,#15684,.F.); +#15706 = ORIENTED_EDGE('',*,*,#15707,.F.); +#15707 = EDGE_CURVE('',#15708,#15677,#15710,.T.); +#15708 = VERTEX_POINT('',#15709); +#15709 = CARTESIAN_POINT('',(2.09,-0.35,0.95)); +#15710 = LINE('',#15711,#15712); +#15711 = CARTESIAN_POINT('',(1.19,-0.35,0.95)); +#15712 = VECTOR('',#15713,1.); +#15713 = DIRECTION('',(-1.,-0.,1.204669080539E-16)); +#15714 = ORIENTED_EDGE('',*,*,#15715,.T.); +#15715 = EDGE_CURVE('',#15708,#15699,#15716,.T.); +#15716 = LINE('',#15717,#15718); +#15717 = CARTESIAN_POINT('',(2.09,-0.35,0.95)); +#15718 = VECTOR('',#15719,1.); +#15719 = DIRECTION('',(-0.,-1.,-0.)); +#15720 = PLANE('',#15721); +#15721 = AXIS2_PLACEMENT_3D('',#15722,#15723,#15724); +#15722 = CARTESIAN_POINT('',(1.19,-0.35,0.95)); +#15723 = DIRECTION('',(1.204669080539E-16,-0.,1.)); +#15724 = DIRECTION('',(1.,0.,-1.204669080539E-16)); +#15725 = ADVANCED_FACE('',(#15726),#15751,.F.); +#15726 = FACE_BOUND('',#15727,.T.); +#15727 = EDGE_LOOP('',(#15728,#15736,#15744,#15750)); +#15728 = ORIENTED_EDGE('',*,*,#15729,.T.); +#15729 = EDGE_CURVE('',#15599,#15730,#15732,.T.); +#15730 = VERTEX_POINT('',#15731); +#15731 = CARTESIAN_POINT('',(-2.09,-1.05,0.95)); +#15732 = LINE('',#15733,#15734); +#15733 = CARTESIAN_POINT('',(-2.09,-1.05,0.95)); +#15734 = VECTOR('',#15735,1.); +#15735 = DIRECTION('',(-1.,-0.,-0.)); +#15736 = ORIENTED_EDGE('',*,*,#15737,.F.); +#15737 = EDGE_CURVE('',#15738,#15730,#15740,.T.); +#15738 = VERTEX_POINT('',#15739); +#15739 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#15740 = LINE('',#15741,#15742); +#15741 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#15742 = VECTOR('',#15743,1.); +#15743 = DIRECTION('',(-0.,-1.,-0.)); +#15744 = ORIENTED_EDGE('',*,*,#15745,.F.); +#15745 = EDGE_CURVE('',#15607,#15738,#15746,.T.); +#15746 = LINE('',#15747,#15748); +#15747 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#15748 = VECTOR('',#15749,1.); +#15749 = DIRECTION('',(-1.,-0.,-0.)); +#15750 = ORIENTED_EDGE('',*,*,#15606,.T.); +#15751 = PLANE('',#15752); +#15752 = AXIS2_PLACEMENT_3D('',#15753,#15754,#15755); +#15753 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#15754 = DIRECTION('',(0.,0.,1.)); +#15755 = DIRECTION('',(1.,0.,-0.)); +#15756 = ADVANCED_FACE('',(#15757,#15767,#15777,#15787),#15816,.F.); +#15757 = FACE_BOUND('',#15758,.T.); +#15758 = EDGE_LOOP('',(#15759,#15766)); +#15759 = ORIENTED_EDGE('',*,*,#15760,.F.); +#15760 = EDGE_CURVE('',#13705,#13697,#15761,.T.); +#15761 = CIRCLE('',#15762,0.25); +#15762 = AXIS2_PLACEMENT_3D('',#15763,#15764,#15765); +#15763 = CARTESIAN_POINT('',(1.59,-1.05,2.85)); +#15764 = DIRECTION('',(0.,-1.,0.)); +#15765 = DIRECTION('',(0.,0.,1.)); +#15766 = ORIENTED_EDGE('',*,*,#13704,.F.); +#15767 = FACE_BOUND('',#15768,.T.); +#15768 = EDGE_LOOP('',(#15769,#15776)); +#15769 = ORIENTED_EDGE('',*,*,#15770,.F.); +#15770 = EDGE_CURVE('',#13737,#13729,#15771,.T.); +#15771 = CIRCLE('',#15772,0.25); +#15772 = AXIS2_PLACEMENT_3D('',#15773,#15774,#15775); +#15773 = CARTESIAN_POINT('',(-1.59,-1.05,2.85)); +#15774 = DIRECTION('',(0.,-1.,0.)); +#15775 = DIRECTION('',(0.,0.,1.)); +#15776 = ORIENTED_EDGE('',*,*,#13736,.F.); +#15777 = FACE_BOUND('',#15778,.T.); +#15778 = EDGE_LOOP('',(#15779,#15786)); +#15779 = ORIENTED_EDGE('',*,*,#15780,.F.); +#15780 = EDGE_CURVE('',#13819,#13811,#15781,.T.); +#15781 = CIRCLE('',#15782,1.); +#15782 = AXIS2_PLACEMENT_3D('',#15783,#15784,#15785); +#15783 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#15784 = DIRECTION('',(0.,-1.,0.)); +#15785 = DIRECTION('',(0.,0.,-1.)); +#15786 = ORIENTED_EDGE('',*,*,#13818,.F.); +#15787 = FACE_BOUND('',#15788,.T.); +#15788 = EDGE_LOOP('',(#15789,#15797,#15798,#15799,#15800,#15801,#15802, + #15810)); +#15789 = ORIENTED_EDGE('',*,*,#15790,.T.); +#15790 = EDGE_CURVE('',#15791,#15730,#15793,.T.); +#15791 = VERTEX_POINT('',#15792); +#15792 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#15793 = LINE('',#15794,#15795); +#15794 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#15795 = VECTOR('',#15796,1.); +#15796 = DIRECTION('',(-0.,-0.,-1.)); +#15797 = ORIENTED_EDGE('',*,*,#15729,.F.); +#15798 = ORIENTED_EDGE('',*,*,#15596,.F.); +#15799 = ORIENTED_EDGE('',*,*,#15636,.F.); +#15800 = ORIENTED_EDGE('',*,*,#15667,.F.); +#15801 = ORIENTED_EDGE('',*,*,#15698,.F.); +#15802 = ORIENTED_EDGE('',*,*,#15803,.F.); +#15803 = EDGE_CURVE('',#15804,#15699,#15806,.T.); +#15804 = VERTEX_POINT('',#15805); +#15805 = CARTESIAN_POINT('',(2.09,-1.05,3.35)); +#15806 = LINE('',#15807,#15808); +#15807 = CARTESIAN_POINT('',(2.09,-1.05,3.35)); +#15808 = VECTOR('',#15809,1.); +#15809 = DIRECTION('',(-0.,-0.,-1.)); +#15810 = ORIENTED_EDGE('',*,*,#15811,.F.); +#15811 = EDGE_CURVE('',#15791,#15804,#15812,.T.); +#15812 = LINE('',#15813,#15814); +#15813 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#15814 = VECTOR('',#15815,1.); +#15815 = DIRECTION('',(1.,0.,0.)); +#15816 = PLANE('',#15817); +#15817 = AXIS2_PLACEMENT_3D('',#15818,#15819,#15820); +#15818 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#15819 = DIRECTION('',(0.,1.,0.)); +#15820 = DIRECTION('',(0.,-0.,1.)); +#15821 = ADVANCED_FACE('',(#15822),#15842,.F.); +#15822 = FACE_BOUND('',#15823,.T.); +#15823 = EDGE_LOOP('',(#15824,#15830,#15831,#15837,#15838,#15839,#15840, + #15841)); +#15824 = ORIENTED_EDGE('',*,*,#15825,.T.); +#15825 = EDGE_CURVE('',#15738,#14254,#15826,.T.); +#15826 = LINE('',#15827,#15828); +#15827 = CARTESIAN_POINT('',(-2.09,-0.35,0.15)); +#15828 = VECTOR('',#15829,1.); +#15829 = DIRECTION('',(-0.,-0.,-1.)); +#15830 = ORIENTED_EDGE('',*,*,#14253,.T.); +#15831 = ORIENTED_EDGE('',*,*,#15832,.T.); +#15832 = EDGE_CURVE('',#14246,#15708,#15833,.T.); +#15833 = LINE('',#15834,#15835); +#15834 = CARTESIAN_POINT('',(2.09,-0.35,0.95)); +#15835 = VECTOR('',#15836,1.); +#15836 = DIRECTION('',(-0.,-0.,1.)); +#15837 = ORIENTED_EDGE('',*,*,#15707,.T.); +#15838 = ORIENTED_EDGE('',*,*,#15676,.T.); +#15839 = ORIENTED_EDGE('',*,*,#15645,.T.); +#15840 = ORIENTED_EDGE('',*,*,#15614,.T.); +#15841 = ORIENTED_EDGE('',*,*,#15745,.T.); +#15842 = PLANE('',#15843); +#15843 = AXIS2_PLACEMENT_3D('',#15844,#15845,#15846); +#15844 = CARTESIAN_POINT('',(0.,-0.35,0.)); +#15845 = DIRECTION('',(0.,1.,0.)); +#15846 = DIRECTION('',(0.,-0.,1.)); +#15847 = ADVANCED_FACE('',(#15848),#15864,.T.); +#15848 = FACE_BOUND('',#15849,.T.); +#15849 = EDGE_LOOP('',(#15850,#15851,#15857,#15858)); +#15850 = ORIENTED_EDGE('',*,*,#15538,.F.); +#15851 = ORIENTED_EDGE('',*,*,#15852,.T.); +#15852 = EDGE_CURVE('',#15539,#15791,#15853,.T.); +#15853 = LINE('',#15854,#15855); +#15854 = CARTESIAN_POINT('',(-2.09,1.36,3.35)); +#15855 = VECTOR('',#15856,1.); +#15856 = DIRECTION('',(0.,-1.,0.)); +#15857 = ORIENTED_EDGE('',*,*,#15811,.T.); +#15858 = ORIENTED_EDGE('',*,*,#15859,.T.); +#15859 = EDGE_CURVE('',#15804,#15541,#15860,.T.); +#15860 = LINE('',#15861,#15862); +#15861 = CARTESIAN_POINT('',(2.09,1.36,3.35)); +#15862 = VECTOR('',#15863,1.); +#15863 = DIRECTION('',(-0.,1.,-0.)); +#15864 = PLANE('',#15865); +#15865 = AXIS2_PLACEMENT_3D('',#15866,#15867,#15868); +#15866 = CARTESIAN_POINT('',(0.,0.,3.35)); +#15867 = DIRECTION('',(-0.,0.,1.)); +#15868 = DIRECTION('',(1.,0.,0.)); +#15869 = ADVANCED_FACE('',(#15870),#15878,.F.); +#15870 = FACE_BOUND('',#15871,.T.); +#15871 = EDGE_LOOP('',(#15872,#15873,#15874,#15875,#15876,#15877)); +#15872 = ORIENTED_EDGE('',*,*,#15852,.F.); +#15873 = ORIENTED_EDGE('',*,*,#15576,.T.); +#15874 = ORIENTED_EDGE('',*,*,#14261,.T.); +#15875 = ORIENTED_EDGE('',*,*,#15825,.F.); +#15876 = ORIENTED_EDGE('',*,*,#15737,.T.); +#15877 = ORIENTED_EDGE('',*,*,#15790,.F.); +#15878 = PLANE('',#15879); +#15879 = AXIS2_PLACEMENT_3D('',#15880,#15881,#15882); +#15880 = CARTESIAN_POINT('',(-2.09,1.36,3.35)); +#15881 = DIRECTION('',(1.,0.,-0.)); +#15882 = DIRECTION('',(-0.,0.,-1.)); +#15883 = ADVANCED_FACE('',(#15884),#15892,.F.); +#15884 = FACE_BOUND('',#15885,.T.); +#15885 = EDGE_LOOP('',(#15886,#15887,#15888,#15889,#15890,#15891)); +#15886 = ORIENTED_EDGE('',*,*,#14245,.T.); +#15887 = ORIENTED_EDGE('',*,*,#15548,.T.); +#15888 = ORIENTED_EDGE('',*,*,#15859,.F.); +#15889 = ORIENTED_EDGE('',*,*,#15803,.T.); +#15890 = ORIENTED_EDGE('',*,*,#15715,.F.); +#15891 = ORIENTED_EDGE('',*,*,#15832,.F.); +#15892 = PLANE('',#15893); +#15893 = AXIS2_PLACEMENT_3D('',#15894,#15895,#15896); +#15894 = CARTESIAN_POINT('',(2.09,1.36,3.35)); +#15895 = DIRECTION('',(-1.,0.,0.)); +#15896 = DIRECTION('',(0.,0.,1.)); +#15897 = ADVANCED_FACE('',(#15898),#15910,.F.); +#15898 = FACE_BOUND('',#15899,.F.); +#15899 = EDGE_LOOP('',(#15900,#15901,#15902,#15909)); +#15900 = ORIENTED_EDGE('',*,*,#15335,.F.); +#15901 = ORIENTED_EDGE('',*,*,#13925,.F.); +#15902 = ORIENTED_EDGE('',*,*,#15903,.T.); +#15903 = EDGE_CURVE('',#13926,#13945,#15904,.T.); +#15904 = CIRCLE('',#15905,0.25); +#15905 = AXIS2_PLACEMENT_3D('',#15906,#15907,#15908); +#15906 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,1.75)); +#15907 = DIRECTION('',(0.,1.,0.)); +#15908 = DIRECTION('',(0.,-0.,1.)); +#15909 = ORIENTED_EDGE('',*,*,#13944,.T.); +#15910 = CYLINDRICAL_SURFACE('',#15911,0.25); +#15911 = AXIS2_PLACEMENT_3D('',#15912,#15913,#15914); +#15912 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,1.75)); +#15913 = DIRECTION('',(-0.,1.,-0.)); +#15914 = DIRECTION('',(0.,0.,1.)); +#15915 = ADVANCED_FACE('',(#15916),#15920,.T.); +#15916 = FACE_BOUND('',#15917,.T.); +#15917 = EDGE_LOOP('',(#15918,#15919)); +#15918 = ORIENTED_EDGE('',*,*,#15903,.T.); +#15919 = ORIENTED_EDGE('',*,*,#13952,.T.); +#15920 = PLANE('',#15921); +#15921 = AXIS2_PLACEMENT_3D('',#15922,#15923,#15924); +#15922 = CARTESIAN_POINT('',(1.192622389734E-15,0.46,1.75)); +#15923 = DIRECTION('',(0.,1.,0.)); +#15924 = DIRECTION('',(0.,-0.,1.)); +#15925 = ADVANCED_FACE('',(#15926),#15938,.F.); +#15926 = FACE_BOUND('',#15927,.F.); +#15927 = EDGE_LOOP('',(#15928,#15929,#15930,#15937)); +#15928 = ORIENTED_EDGE('',*,*,#15325,.F.); +#15929 = ORIENTED_EDGE('',*,*,#13883,.F.); +#15930 = ORIENTED_EDGE('',*,*,#15931,.T.); +#15931 = EDGE_CURVE('',#13884,#13903,#15932,.T.); +#15932 = CIRCLE('',#15933,0.25); +#15933 = AXIS2_PLACEMENT_3D('',#15934,#15935,#15936); +#15934 = CARTESIAN_POINT('',(-1.2,0.46,1.75)); +#15935 = DIRECTION('',(0.,1.,0.)); +#15936 = DIRECTION('',(0.,-0.,1.)); +#15937 = ORIENTED_EDGE('',*,*,#13902,.T.); +#15938 = CYLINDRICAL_SURFACE('',#15939,0.25); +#15939 = AXIS2_PLACEMENT_3D('',#15940,#15941,#15942); +#15940 = CARTESIAN_POINT('',(-1.2,0.46,1.75)); +#15941 = DIRECTION('',(-0.,1.,-0.)); +#15942 = DIRECTION('',(0.,0.,1.)); +#15943 = ADVANCED_FACE('',(#15944),#15948,.T.); +#15944 = FACE_BOUND('',#15945,.T.); +#15945 = EDGE_LOOP('',(#15946,#15947)); +#15946 = ORIENTED_EDGE('',*,*,#15931,.T.); +#15947 = ORIENTED_EDGE('',*,*,#13910,.T.); +#15948 = PLANE('',#15949); +#15949 = AXIS2_PLACEMENT_3D('',#15950,#15951,#15952); +#15950 = CARTESIAN_POINT('',(-1.2,0.46,1.75)); +#15951 = DIRECTION('',(0.,1.,0.)); +#15952 = DIRECTION('',(0.,-0.,1.)); +#15953 = ADVANCED_FACE('',(#15954),#15966,.F.); +#15954 = FACE_BOUND('',#15955,.F.); +#15955 = EDGE_LOOP('',(#15956,#15957,#15958,#15965)); +#15956 = ORIENTED_EDGE('',*,*,#15315,.F.); +#15957 = ORIENTED_EDGE('',*,*,#13841,.F.); +#15958 = ORIENTED_EDGE('',*,*,#15959,.T.); +#15959 = EDGE_CURVE('',#13842,#13861,#15960,.T.); +#15960 = CIRCLE('',#15961,0.25); +#15961 = AXIS2_PLACEMENT_3D('',#15962,#15963,#15964); +#15962 = CARTESIAN_POINT('',(1.2,0.46,1.75)); +#15963 = DIRECTION('',(0.,1.,0.)); +#15964 = DIRECTION('',(0.,-0.,1.)); +#15965 = ORIENTED_EDGE('',*,*,#13860,.T.); +#15966 = CYLINDRICAL_SURFACE('',#15967,0.25); +#15967 = AXIS2_PLACEMENT_3D('',#15968,#15969,#15970); +#15968 = CARTESIAN_POINT('',(1.2,0.46,1.75)); +#15969 = DIRECTION('',(-0.,1.,-0.)); +#15970 = DIRECTION('',(0.,0.,1.)); +#15971 = ADVANCED_FACE('',(#15972),#15976,.T.); +#15972 = FACE_BOUND('',#15973,.T.); +#15973 = EDGE_LOOP('',(#15974,#15975)); +#15974 = ORIENTED_EDGE('',*,*,#15959,.T.); +#15975 = ORIENTED_EDGE('',*,*,#13868,.T.); +#15976 = PLANE('',#15977); +#15977 = AXIS2_PLACEMENT_3D('',#15978,#15979,#15980); +#15978 = CARTESIAN_POINT('',(1.2,0.46,1.75)); +#15979 = DIRECTION('',(0.,1.,0.)); +#15980 = DIRECTION('',(0.,-0.,1.)); +#15981 = ADVANCED_FACE('',(#15982),#16018,.T.); +#15982 = FACE_BOUND('',#15983,.T.); +#15983 = EDGE_LOOP('',(#15984,#15985,#15993,#16002,#16010,#16017)); +#15984 = ORIENTED_EDGE('',*,*,#14759,.F.); +#15985 = ORIENTED_EDGE('',*,*,#15986,.F.); +#15986 = EDGE_CURVE('',#15987,#14752,#15989,.T.); +#15987 = VERTEX_POINT('',#15988); +#15988 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#15989 = LINE('',#15990,#15991); +#15990 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#15991 = VECTOR('',#15992,1.); +#15992 = DIRECTION('',(0.,-1.,0.)); +#15993 = ORIENTED_EDGE('',*,*,#15994,.F.); +#15994 = EDGE_CURVE('',#15995,#15987,#15997,.T.); +#15995 = VERTEX_POINT('',#15996); +#15996 = CARTESIAN_POINT('',(-1.5,1.285,0.)); +#15997 = CIRCLE('',#15998,0.225); +#15998 = AXIS2_PLACEMENT_3D('',#15999,#16000,#16001); +#15999 = CARTESIAN_POINT('',(-1.5,1.285,0.225)); +#16000 = DIRECTION('',(1.,0.,0.)); +#16001 = DIRECTION('',(0.,0.,-1.)); +#16002 = ORIENTED_EDGE('',*,*,#16003,.T.); +#16003 = EDGE_CURVE('',#15995,#16004,#16006,.T.); +#16004 = VERTEX_POINT('',#16005); +#16005 = CARTESIAN_POINT('',(-1.5,1.285,0.15)); +#16006 = LINE('',#16007,#16008); +#16007 = CARTESIAN_POINT('',(-1.5,1.285,0.)); +#16008 = VECTOR('',#16009,1.); +#16009 = DIRECTION('',(0.,0.,1.)); +#16010 = ORIENTED_EDGE('',*,*,#16011,.T.); +#16011 = EDGE_CURVE('',#16004,#15408,#16012,.T.); +#16012 = CIRCLE('',#16013,7.5E-02); +#16013 = AXIS2_PLACEMENT_3D('',#16014,#16015,#16016); +#16014 = CARTESIAN_POINT('',(-1.5,1.285,0.225)); +#16015 = DIRECTION('',(1.,0.,0.)); +#16016 = DIRECTION('',(0.,0.,-1.)); +#16017 = ORIENTED_EDGE('',*,*,#15407,.T.); +#16018 = PLANE('',#16019); +#16019 = AXIS2_PLACEMENT_3D('',#16020,#16021,#16022); +#16020 = CARTESIAN_POINT('',(-1.5,1.285,1.355252715607E-16)); +#16021 = DIRECTION('',(-1.,0.,-0.)); +#16022 = DIRECTION('',(0.,0.,1.)); +#16023 = ADVANCED_FACE('',(#16024),#16060,.T.); +#16024 = FACE_BOUND('',#16025,.T.); +#16025 = EDGE_LOOP('',(#16026,#16027,#16028,#16037,#16045,#16054)); +#16026 = ORIENTED_EDGE('',*,*,#14727,.F.); +#16027 = ORIENTED_EDGE('',*,*,#15423,.T.); +#16028 = ORIENTED_EDGE('',*,*,#16029,.F.); +#16029 = EDGE_CURVE('',#16030,#15416,#16032,.T.); +#16030 = VERTEX_POINT('',#16031); +#16031 = CARTESIAN_POINT('',(-0.85,1.285,0.15)); +#16032 = CIRCLE('',#16033,7.5E-02); +#16033 = AXIS2_PLACEMENT_3D('',#16034,#16035,#16036); +#16034 = CARTESIAN_POINT('',(-0.85,1.285,0.225)); +#16035 = DIRECTION('',(1.,0.,0.)); +#16036 = DIRECTION('',(0.,0.,-1.)); +#16037 = ORIENTED_EDGE('',*,*,#16038,.T.); +#16038 = EDGE_CURVE('',#16030,#16039,#16041,.T.); +#16039 = VERTEX_POINT('',#16040); +#16040 = CARTESIAN_POINT('',(-0.85,1.285,0.)); +#16041 = LINE('',#16042,#16043); +#16042 = CARTESIAN_POINT('',(-0.85,1.285,0.)); +#16043 = VECTOR('',#16044,1.); +#16044 = DIRECTION('',(-7.228014483237E-16,0.,-1.)); +#16045 = ORIENTED_EDGE('',*,*,#16046,.T.); +#16046 = EDGE_CURVE('',#16039,#16047,#16049,.T.); +#16047 = VERTEX_POINT('',#16048); +#16048 = CARTESIAN_POINT('',(-0.85,1.51,0.225)); +#16049 = CIRCLE('',#16050,0.225); +#16050 = AXIS2_PLACEMENT_3D('',#16051,#16052,#16053); +#16051 = CARTESIAN_POINT('',(-0.85,1.285,0.225)); +#16052 = DIRECTION('',(1.,0.,0.)); +#16053 = DIRECTION('',(0.,0.,-1.)); +#16054 = ORIENTED_EDGE('',*,*,#16055,.F.); +#16055 = EDGE_CURVE('',#14728,#16047,#16056,.T.); +#16056 = LINE('',#16057,#16058); +#16057 = CARTESIAN_POINT('',(-0.85,1.51,0.225)); +#16058 = VECTOR('',#16059,1.); +#16059 = DIRECTION('',(-7.228014483237E-16,1.,0.)); +#16060 = PLANE('',#16061); +#16061 = AXIS2_PLACEMENT_3D('',#16062,#16063,#16064); +#16062 = CARTESIAN_POINT('',(-0.85,1.285,1.355252715607E-16)); +#16063 = DIRECTION('',(1.,0.,0.)); +#16064 = DIRECTION('',(0.,0.,-1.)); +#16065 = ADVANCED_FACE('',(#16066),#16084,.T.); +#16066 = FACE_BOUND('',#16067,.T.); +#16067 = EDGE_LOOP('',(#16068,#16069,#16077)); +#16068 = ORIENTED_EDGE('',*,*,#14285,.F.); +#16069 = ORIENTED_EDGE('',*,*,#16070,.F.); +#16070 = EDGE_CURVE('',#16071,#14278,#16073,.T.); +#16071 = VERTEX_POINT('',#16072); +#16072 = CARTESIAN_POINT('',(-1.5,0.283245582288,-1.89735380185E-16)); +#16073 = LINE('',#16074,#16075); +#16074 = CARTESIAN_POINT('',(-1.5,0.283245582288,-2.710505431214E-17)); +#16075 = VECTOR('',#16076,1.); +#16076 = DIRECTION('',(0.,0.,1.)); +#16077 = ORIENTED_EDGE('',*,*,#16078,.F.); +#16078 = EDGE_CURVE('',#14286,#16071,#16079,.T.); +#16079 = CIRCLE('',#16080,0.236508823411); +#16080 = AXIS2_PLACEMENT_3D('',#16081,#16082,#16083); +#16081 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.236508823411)); +#16082 = DIRECTION('',(1.,0.,0.)); +#16083 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16084 = PLANE('',#16085); +#16085 = AXIS2_PLACEMENT_3D('',#16086,#16087,#16088); +#16086 = CARTESIAN_POINT('',(-1.5,4.673675887722E-02,0.236508823411)); +#16087 = DIRECTION('',(-1.,0.,-0.)); +#16088 = DIRECTION('',(0.,0.,1.)); +#16089 = ADVANCED_FACE('',(#16090),#16108,.T.); +#16090 = FACE_BOUND('',#16091,.T.); +#16091 = EDGE_LOOP('',(#16092,#16093,#16102)); +#16092 = ORIENTED_EDGE('',*,*,#14301,.F.); +#16093 = ORIENTED_EDGE('',*,*,#16094,.T.); +#16094 = EDGE_CURVE('',#14294,#16095,#16097,.T.); +#16095 = VERTEX_POINT('',#16096); +#16096 = CARTESIAN_POINT('',(-0.85,0.283245582288,-1.89735380185E-16)); +#16097 = CIRCLE('',#16098,0.236508823411); +#16098 = AXIS2_PLACEMENT_3D('',#16099,#16100,#16101); +#16099 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.236508823411)); +#16100 = DIRECTION('',(1.,0.,0.)); +#16101 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16102 = ORIENTED_EDGE('',*,*,#16103,.F.); +#16103 = EDGE_CURVE('',#14302,#16095,#16104,.T.); +#16104 = LINE('',#16105,#16106); +#16105 = CARTESIAN_POINT('',(-0.85,0.283245582288,-2.710505431214E-17)); +#16106 = VECTOR('',#16107,1.); +#16107 = DIRECTION('',(-7.228014483237E-16,0.,-1.)); +#16108 = PLANE('',#16109); +#16109 = AXIS2_PLACEMENT_3D('',#16110,#16111,#16112); +#16110 = CARTESIAN_POINT('',(-0.85,4.673675887722E-02,0.236508823411)); +#16111 = DIRECTION('',(1.,0.,0.)); +#16112 = DIRECTION('',(0.,0.,-1.)); +#16113 = ADVANCED_FACE('',(#16114),#16125,.T.); +#16114 = FACE_BOUND('',#16115,.T.); +#16115 = EDGE_LOOP('',(#16116,#16117,#16118,#16124)); +#16116 = ORIENTED_EDGE('',*,*,#14293,.F.); +#16117 = ORIENTED_EDGE('',*,*,#16078,.T.); +#16118 = ORIENTED_EDGE('',*,*,#16119,.F.); +#16119 = EDGE_CURVE('',#16095,#16071,#16120,.T.); +#16120 = LINE('',#16121,#16122); +#16121 = CARTESIAN_POINT('',(-1.5,0.283245582288,-2.710505431214E-17)); +#16122 = VECTOR('',#16123,1.); +#16123 = DIRECTION('',(-1.,0.,-0.)); +#16124 = ORIENTED_EDGE('',*,*,#16094,.F.); +#16125 = CYLINDRICAL_SURFACE('',#16126,0.236508823411); +#16126 = AXIS2_PLACEMENT_3D('',#16127,#16128,#16129); +#16127 = CARTESIAN_POINT('',(0.,0.283245582288,0.236508823411)); +#16128 = DIRECTION('',(1.,0.,0.)); +#16129 = DIRECTION('',(0.,0.,-1.)); +#16130 = ADVANCED_FACE('',(#16131),#16161,.T.); +#16131 = FACE_BOUND('',#16132,.T.); +#16132 = EDGE_LOOP('',(#16133,#16143,#16149,#16155)); +#16133 = ORIENTED_EDGE('',*,*,#16134,.F.); +#16134 = EDGE_CURVE('',#16135,#16137,#16139,.T.); +#16135 = VERTEX_POINT('',#16136); +#16136 = CARTESIAN_POINT('',(-0.85,1.51,0.55)); +#16137 = VERTEX_POINT('',#16138); +#16138 = CARTESIAN_POINT('',(-1.5,1.51,0.55)); +#16139 = LINE('',#16140,#16141); +#16140 = CARTESIAN_POINT('',(-1.5,1.51,0.55)); +#16141 = VECTOR('',#16142,1.); +#16142 = DIRECTION('',(-1.,0.,0.)); +#16143 = ORIENTED_EDGE('',*,*,#16144,.F.); +#16144 = EDGE_CURVE('',#16047,#16135,#16145,.T.); +#16145 = LINE('',#16146,#16147); +#16146 = CARTESIAN_POINT('',(-0.85,1.51,0.225)); +#16147 = VECTOR('',#16148,1.); +#16148 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16149 = ORIENTED_EDGE('',*,*,#16150,.T.); +#16150 = EDGE_CURVE('',#16047,#15987,#16151,.T.); +#16151 = LINE('',#16152,#16153); +#16152 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#16153 = VECTOR('',#16154,1.); +#16154 = DIRECTION('',(-1.,0.,0.)); +#16155 = ORIENTED_EDGE('',*,*,#16156,.T.); +#16156 = EDGE_CURVE('',#15987,#16137,#16157,.T.); +#16157 = LINE('',#16158,#16159); +#16158 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#16159 = VECTOR('',#16160,1.); +#16160 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16161 = PLANE('',#16162); +#16162 = AXIS2_PLACEMENT_3D('',#16163,#16164,#16165); +#16163 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#16164 = DIRECTION('',(0.,1.,-6.672013369142E-16)); +#16165 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16166 = ADVANCED_FACE('',(#16167),#16178,.T.); +#16167 = FACE_BOUND('',#16168,.T.); +#16168 = EDGE_LOOP('',(#16169,#16170,#16176,#16177)); +#16169 = ORIENTED_EDGE('',*,*,#16144,.T.); +#16170 = ORIENTED_EDGE('',*,*,#16171,.F.); +#16171 = EDGE_CURVE('',#14736,#16135,#16172,.T.); +#16172 = LINE('',#16173,#16174); +#16173 = CARTESIAN_POINT('',(-0.85,1.51,0.55)); +#16174 = VECTOR('',#16175,1.); +#16175 = DIRECTION('',(-7.228014483237E-16,1.,-6.672013369142E-16)); +#16176 = ORIENTED_EDGE('',*,*,#14735,.F.); +#16177 = ORIENTED_EDGE('',*,*,#16055,.T.); +#16178 = PLANE('',#16179); +#16179 = AXIS2_PLACEMENT_3D('',#16180,#16181,#16182); +#16180 = CARTESIAN_POINT('',(-0.85,1.51,0.225)); +#16181 = DIRECTION('',(1.,7.228014483237E-16,-4.82254092645E-31)); +#16182 = DIRECTION('',(-7.228014483237E-16,1.,0.)); +#16183 = ADVANCED_FACE('',(#16184),#16195,.T.); +#16184 = FACE_BOUND('',#16185,.T.); +#16185 = EDGE_LOOP('',(#16186,#16187,#16193,#16194)); +#16186 = ORIENTED_EDGE('',*,*,#14751,.T.); +#16187 = ORIENTED_EDGE('',*,*,#16188,.F.); +#16188 = EDGE_CURVE('',#16137,#14744,#16189,.T.); +#16189 = LINE('',#16190,#16191); +#16190 = CARTESIAN_POINT('',(-1.5,1.51,0.55)); +#16191 = VECTOR('',#16192,1.); +#16192 = DIRECTION('',(0.,-1.,6.672013369142E-16)); +#16193 = ORIENTED_EDGE('',*,*,#16156,.F.); +#16194 = ORIENTED_EDGE('',*,*,#15986,.T.); +#16195 = PLANE('',#16196); +#16196 = AXIS2_PLACEMENT_3D('',#16197,#16198,#16199); +#16197 = CARTESIAN_POINT('',(-1.5,1.51,0.225)); +#16198 = DIRECTION('',(-1.,0.,0.)); +#16199 = DIRECTION('',(0.,0.,1.)); +#16200 = ADVANCED_FACE('',(#16201),#16212,.T.); +#16201 = FACE_BOUND('',#16202,.T.); +#16202 = EDGE_LOOP('',(#16203,#16204,#16205,#16211)); +#16203 = ORIENTED_EDGE('',*,*,#16150,.F.); +#16204 = ORIENTED_EDGE('',*,*,#16046,.F.); +#16205 = ORIENTED_EDGE('',*,*,#16206,.T.); +#16206 = EDGE_CURVE('',#16039,#15995,#16207,.T.); +#16207 = LINE('',#16208,#16209); +#16208 = CARTESIAN_POINT('',(-1.5,1.285,0.)); +#16209 = VECTOR('',#16210,1.); +#16210 = DIRECTION('',(-1.,0.,-0.)); +#16211 = ORIENTED_EDGE('',*,*,#15994,.T.); +#16212 = CYLINDRICAL_SURFACE('',#16213,0.225); +#16213 = AXIS2_PLACEMENT_3D('',#16214,#16215,#16216); +#16214 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16215 = DIRECTION('',(1.,0.,0.)); +#16216 = DIRECTION('',(0.,0.,-1.)); +#16217 = ADVANCED_FACE('',(#16218),#16229,.F.); +#16218 = FACE_BOUND('',#16219,.F.); +#16219 = EDGE_LOOP('',(#16220,#16226,#16227,#16228)); +#16220 = ORIENTED_EDGE('',*,*,#16221,.F.); +#16221 = EDGE_CURVE('',#16004,#16030,#16222,.T.); +#16222 = LINE('',#16223,#16224); +#16223 = CARTESIAN_POINT('',(-1.5,1.285,0.15)); +#16224 = VECTOR('',#16225,1.); +#16225 = DIRECTION('',(1.,0.,0.)); +#16226 = ORIENTED_EDGE('',*,*,#16011,.T.); +#16227 = ORIENTED_EDGE('',*,*,#15415,.F.); +#16228 = ORIENTED_EDGE('',*,*,#16029,.F.); +#16229 = CYLINDRICAL_SURFACE('',#16230,7.5E-02); +#16230 = AXIS2_PLACEMENT_3D('',#16231,#16232,#16233); +#16231 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16232 = DIRECTION('',(1.,0.,0.)); +#16233 = DIRECTION('',(0.,0.,-1.)); +#16234 = ADVANCED_FACE('',(#16235),#16251,.T.); +#16235 = FACE_BOUND('',#16236,.T.); +#16236 = EDGE_LOOP('',(#16237,#16238,#16244,#16245)); +#16237 = ORIENTED_EDGE('',*,*,#16206,.F.); +#16238 = ORIENTED_EDGE('',*,*,#16239,.F.); +#16239 = EDGE_CURVE('',#16095,#16039,#16240,.T.); +#16240 = LINE('',#16241,#16242); +#16241 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.)); +#16242 = VECTOR('',#16243,1.); +#16243 = DIRECTION('',(0.,1.,0.)); +#16244 = ORIENTED_EDGE('',*,*,#16119,.T.); +#16245 = ORIENTED_EDGE('',*,*,#16246,.T.); +#16246 = EDGE_CURVE('',#16071,#15995,#16247,.T.); +#16247 = LINE('',#16248,#16249); +#16248 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.)); +#16249 = VECTOR('',#16250,1.); +#16250 = DIRECTION('',(0.,1.,0.)); +#16251 = PLANE('',#16252); +#16252 = AXIS2_PLACEMENT_3D('',#16253,#16254,#16255); +#16253 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.)); +#16254 = DIRECTION('',(0.,0.,-1.)); +#16255 = DIRECTION('',(-1.,0.,-0.)); +#16256 = ADVANCED_FACE('',(#16257),#16269,.T.); +#16257 = FACE_BOUND('',#16258,.T.); +#16258 = EDGE_LOOP('',(#16259,#16260,#16261,#16267,#16268)); +#16259 = ORIENTED_EDGE('',*,*,#16239,.T.); +#16260 = ORIENTED_EDGE('',*,*,#16038,.F.); +#16261 = ORIENTED_EDGE('',*,*,#16262,.F.); +#16262 = EDGE_CURVE('',#14310,#16030,#16263,.T.); +#16263 = LINE('',#16264,#16265); +#16264 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.15)); +#16265 = VECTOR('',#16266,1.); +#16266 = DIRECTION('',(0.,1.,0.)); +#16267 = ORIENTED_EDGE('',*,*,#14309,.F.); +#16268 = ORIENTED_EDGE('',*,*,#16103,.T.); +#16269 = PLANE('',#16270); +#16270 = AXIS2_PLACEMENT_3D('',#16271,#16272,#16273); +#16271 = CARTESIAN_POINT('',(-0.85,0.283245582288,0.)); +#16272 = DIRECTION('',(1.,0.,-7.228014483237E-16)); +#16273 = DIRECTION('',(-7.228014483237E-16,0.,-1.)); +#16274 = ADVANCED_FACE('',(#16275),#16286,.T.); +#16275 = FACE_BOUND('',#16276,.T.); +#16276 = EDGE_LOOP('',(#16277,#16283,#16284,#16285)); +#16277 = ORIENTED_EDGE('',*,*,#16278,.F.); +#16278 = EDGE_CURVE('',#14270,#16004,#16279,.T.); +#16279 = LINE('',#16280,#16281); +#16280 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.15)); +#16281 = VECTOR('',#16282,1.); +#16282 = DIRECTION('',(0.,1.,0.)); +#16283 = ORIENTED_EDGE('',*,*,#15569,.T.); +#16284 = ORIENTED_EDGE('',*,*,#16262,.T.); +#16285 = ORIENTED_EDGE('',*,*,#16221,.F.); +#16286 = PLANE('',#16287); +#16287 = AXIS2_PLACEMENT_3D('',#16288,#16289,#16290); +#16288 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.15)); +#16289 = DIRECTION('',(0.,0.,1.)); +#16290 = DIRECTION('',(1.,0.,-0.)); +#16291 = ADVANCED_FACE('',(#16292),#16299,.T.); +#16292 = FACE_BOUND('',#16293,.T.); +#16293 = EDGE_LOOP('',(#16294,#16295,#16296,#16297,#16298)); +#16294 = ORIENTED_EDGE('',*,*,#14277,.T.); +#16295 = ORIENTED_EDGE('',*,*,#16278,.T.); +#16296 = ORIENTED_EDGE('',*,*,#16003,.F.); +#16297 = ORIENTED_EDGE('',*,*,#16246,.F.); +#16298 = ORIENTED_EDGE('',*,*,#16070,.T.); +#16299 = PLANE('',#16300); +#16300 = AXIS2_PLACEMENT_3D('',#16301,#16302,#16303); +#16301 = CARTESIAN_POINT('',(-1.5,0.283245582288,0.)); +#16302 = DIRECTION('',(-1.,0.,0.)); +#16303 = DIRECTION('',(0.,0.,1.)); +#16304 = ADVANCED_FACE('',(#16305),#16311,.T.); +#16305 = FACE_BOUND('',#16306,.T.); +#16306 = EDGE_LOOP('',(#16307,#16308,#16309,#16310)); +#16307 = ORIENTED_EDGE('',*,*,#16171,.T.); +#16308 = ORIENTED_EDGE('',*,*,#16134,.T.); +#16309 = ORIENTED_EDGE('',*,*,#16188,.T.); +#16310 = ORIENTED_EDGE('',*,*,#14743,.T.); +#16311 = PLANE('',#16312); +#16312 = AXIS2_PLACEMENT_3D('',#16313,#16314,#16315); +#16313 = CARTESIAN_POINT('',(0.,1.556736758877,0.55)); +#16314 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16315 = DIRECTION('',(-1.,0.,0.)); +#16316 = ADVANCED_FACE('',(#16317),#16335,.T.); +#16317 = FACE_BOUND('',#16318,.T.); +#16318 = EDGE_LOOP('',(#16319,#16320,#16328)); +#16319 = ORIENTED_EDGE('',*,*,#14333,.F.); +#16320 = ORIENTED_EDGE('',*,*,#16321,.F.); +#16321 = EDGE_CURVE('',#16322,#14326,#16324,.T.); +#16322 = VERTEX_POINT('',#16323); +#16323 = CARTESIAN_POINT('',(-0.25,0.283245582288,-1.89735380185E-16)); +#16324 = LINE('',#16325,#16326); +#16325 = CARTESIAN_POINT('',(-0.25,0.283245582288,-2.710505431214E-17)); +#16326 = VECTOR('',#16327,1.); +#16327 = DIRECTION('',(0.,0.,1.)); +#16328 = ORIENTED_EDGE('',*,*,#16329,.F.); +#16329 = EDGE_CURVE('',#14334,#16322,#16330,.T.); +#16330 = CIRCLE('',#16331,0.236508823411); +#16331 = AXIS2_PLACEMENT_3D('',#16332,#16333,#16334); +#16332 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.236508823411)); +#16333 = DIRECTION('',(1.,0.,0.)); +#16334 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16335 = PLANE('',#16336); +#16336 = AXIS2_PLACEMENT_3D('',#16337,#16338,#16339); +#16337 = CARTESIAN_POINT('',(-0.25,4.673675887722E-02,0.236508823411)); +#16338 = DIRECTION('',(-1.,0.,-0.)); +#16339 = DIRECTION('',(0.,0.,1.)); +#16340 = ADVANCED_FACE('',(#16341),#16359,.T.); +#16341 = FACE_BOUND('',#16342,.T.); +#16342 = EDGE_LOOP('',(#16343,#16344,#16353)); +#16343 = ORIENTED_EDGE('',*,*,#14349,.F.); +#16344 = ORIENTED_EDGE('',*,*,#16345,.T.); +#16345 = EDGE_CURVE('',#14342,#16346,#16348,.T.); +#16346 = VERTEX_POINT('',#16347); +#16347 = CARTESIAN_POINT('',(0.25,0.283245582288,-1.89735380185E-16)); +#16348 = CIRCLE('',#16349,0.236508823411); +#16349 = AXIS2_PLACEMENT_3D('',#16350,#16351,#16352); +#16350 = CARTESIAN_POINT('',(0.25,0.283245582288,0.236508823411)); +#16351 = DIRECTION('',(1.,0.,0.)); +#16352 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16353 = ORIENTED_EDGE('',*,*,#16354,.F.); +#16354 = EDGE_CURVE('',#14350,#16346,#16355,.T.); +#16355 = LINE('',#16356,#16357); +#16356 = CARTESIAN_POINT('',(0.25,0.283245582288,-2.710505431214E-17)); +#16357 = VECTOR('',#16358,1.); +#16358 = DIRECTION('',(-3.614007241618E-16,0.,-1.)); +#16359 = PLANE('',#16360); +#16360 = AXIS2_PLACEMENT_3D('',#16361,#16362,#16363); +#16361 = CARTESIAN_POINT('',(0.25,4.673675887722E-02,0.236508823411)); +#16362 = DIRECTION('',(1.,0.,0.)); +#16363 = DIRECTION('',(0.,0.,-1.)); +#16364 = ADVANCED_FACE('',(#16365),#16376,.T.); +#16365 = FACE_BOUND('',#16366,.T.); +#16366 = EDGE_LOOP('',(#16367,#16368,#16369,#16375)); +#16367 = ORIENTED_EDGE('',*,*,#14341,.F.); +#16368 = ORIENTED_EDGE('',*,*,#16329,.T.); +#16369 = ORIENTED_EDGE('',*,*,#16370,.F.); +#16370 = EDGE_CURVE('',#16346,#16322,#16371,.T.); +#16371 = LINE('',#16372,#16373); +#16372 = CARTESIAN_POINT('',(-0.25,0.283245582288,-2.710505431214E-17)); +#16373 = VECTOR('',#16374,1.); +#16374 = DIRECTION('',(-1.,0.,-0.)); +#16375 = ORIENTED_EDGE('',*,*,#16345,.F.); +#16376 = CYLINDRICAL_SURFACE('',#16377,0.236508823411); +#16377 = AXIS2_PLACEMENT_3D('',#16378,#16379,#16380); +#16378 = CARTESIAN_POINT('',(0.,0.283245582288,0.236508823411)); +#16379 = DIRECTION('',(1.,0.,0.)); +#16380 = DIRECTION('',(0.,0.,-1.)); +#16381 = ADVANCED_FACE('',(#16382),#16418,.T.); +#16382 = FACE_BOUND('',#16383,.T.); +#16383 = EDGE_LOOP('',(#16384,#16385,#16393,#16402,#16410,#16417)); +#16384 = ORIENTED_EDGE('',*,*,#14711,.F.); +#16385 = ORIENTED_EDGE('',*,*,#16386,.F.); +#16386 = EDGE_CURVE('',#16387,#14704,#16389,.T.); +#16387 = VERTEX_POINT('',#16388); +#16388 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16389 = LINE('',#16390,#16391); +#16390 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16391 = VECTOR('',#16392,1.); +#16392 = DIRECTION('',(0.,-1.,0.)); +#16393 = ORIENTED_EDGE('',*,*,#16394,.F.); +#16394 = EDGE_CURVE('',#16395,#16387,#16397,.T.); +#16395 = VERTEX_POINT('',#16396); +#16396 = CARTESIAN_POINT('',(-0.25,1.285,0.)); +#16397 = CIRCLE('',#16398,0.225); +#16398 = AXIS2_PLACEMENT_3D('',#16399,#16400,#16401); +#16399 = CARTESIAN_POINT('',(-0.25,1.285,0.225)); +#16400 = DIRECTION('',(1.,0.,0.)); +#16401 = DIRECTION('',(0.,0.,-1.)); +#16402 = ORIENTED_EDGE('',*,*,#16403,.T.); +#16403 = EDGE_CURVE('',#16395,#16404,#16406,.T.); +#16404 = VERTEX_POINT('',#16405); +#16405 = CARTESIAN_POINT('',(-0.25,1.285,0.15)); +#16406 = LINE('',#16407,#16408); +#16407 = CARTESIAN_POINT('',(-0.25,1.285,0.)); +#16408 = VECTOR('',#16409,1.); +#16409 = DIRECTION('',(0.,0.,1.)); +#16410 = ORIENTED_EDGE('',*,*,#16411,.T.); +#16411 = EDGE_CURVE('',#16404,#15431,#16412,.T.); +#16412 = CIRCLE('',#16413,7.5E-02); +#16413 = AXIS2_PLACEMENT_3D('',#16414,#16415,#16416); +#16414 = CARTESIAN_POINT('',(-0.25,1.285,0.225)); +#16415 = DIRECTION('',(1.,0.,0.)); +#16416 = DIRECTION('',(0.,0.,-1.)); +#16417 = ORIENTED_EDGE('',*,*,#15430,.T.); +#16418 = PLANE('',#16419); +#16419 = AXIS2_PLACEMENT_3D('',#16420,#16421,#16422); +#16420 = CARTESIAN_POINT('',(-0.25,1.285,1.355252715607E-16)); +#16421 = DIRECTION('',(-1.,0.,-0.)); +#16422 = DIRECTION('',(0.,0.,1.)); +#16423 = ADVANCED_FACE('',(#16424),#16460,.T.); +#16424 = FACE_BOUND('',#16425,.T.); +#16425 = EDGE_LOOP('',(#16426,#16427,#16428,#16437,#16445,#16454)); +#16426 = ORIENTED_EDGE('',*,*,#14679,.F.); +#16427 = ORIENTED_EDGE('',*,*,#15446,.T.); +#16428 = ORIENTED_EDGE('',*,*,#16429,.F.); +#16429 = EDGE_CURVE('',#16430,#15439,#16432,.T.); +#16430 = VERTEX_POINT('',#16431); +#16431 = CARTESIAN_POINT('',(0.25,1.285,0.15)); +#16432 = CIRCLE('',#16433,7.5E-02); +#16433 = AXIS2_PLACEMENT_3D('',#16434,#16435,#16436); +#16434 = CARTESIAN_POINT('',(0.25,1.285,0.225)); +#16435 = DIRECTION('',(1.,0.,0.)); +#16436 = DIRECTION('',(0.,0.,-1.)); +#16437 = ORIENTED_EDGE('',*,*,#16438,.T.); +#16438 = EDGE_CURVE('',#16430,#16439,#16441,.T.); +#16439 = VERTEX_POINT('',#16440); +#16440 = CARTESIAN_POINT('',(0.25,1.285,0.)); +#16441 = LINE('',#16442,#16443); +#16442 = CARTESIAN_POINT('',(0.25,1.285,0.)); +#16443 = VECTOR('',#16444,1.); +#16444 = DIRECTION('',(-3.614007241618E-16,0.,-1.)); +#16445 = ORIENTED_EDGE('',*,*,#16446,.T.); +#16446 = EDGE_CURVE('',#16439,#16447,#16449,.T.); +#16447 = VERTEX_POINT('',#16448); +#16448 = CARTESIAN_POINT('',(0.25,1.51,0.225)); +#16449 = CIRCLE('',#16450,0.225); +#16450 = AXIS2_PLACEMENT_3D('',#16451,#16452,#16453); +#16451 = CARTESIAN_POINT('',(0.25,1.285,0.225)); +#16452 = DIRECTION('',(1.,0.,0.)); +#16453 = DIRECTION('',(0.,0.,-1.)); +#16454 = ORIENTED_EDGE('',*,*,#16455,.F.); +#16455 = EDGE_CURVE('',#14680,#16447,#16456,.T.); +#16456 = LINE('',#16457,#16458); +#16457 = CARTESIAN_POINT('',(0.25,1.51,0.225)); +#16458 = VECTOR('',#16459,1.); +#16459 = DIRECTION('',(-3.614007241618E-16,1.,0.)); +#16460 = PLANE('',#16461); +#16461 = AXIS2_PLACEMENT_3D('',#16462,#16463,#16464); +#16462 = CARTESIAN_POINT('',(0.25,1.285,1.355252715607E-16)); +#16463 = DIRECTION('',(1.,0.,0.)); +#16464 = DIRECTION('',(0.,0.,-1.)); +#16465 = ADVANCED_FACE('',(#16466),#16496,.T.); +#16466 = FACE_BOUND('',#16467,.T.); +#16467 = EDGE_LOOP('',(#16468,#16478,#16484,#16490)); +#16468 = ORIENTED_EDGE('',*,*,#16469,.F.); +#16469 = EDGE_CURVE('',#16470,#16472,#16474,.T.); +#16470 = VERTEX_POINT('',#16471); +#16471 = CARTESIAN_POINT('',(0.25,1.51,0.55)); +#16472 = VERTEX_POINT('',#16473); +#16473 = CARTESIAN_POINT('',(-0.25,1.51,0.55)); +#16474 = LINE('',#16475,#16476); +#16475 = CARTESIAN_POINT('',(-0.25,1.51,0.55)); +#16476 = VECTOR('',#16477,1.); +#16477 = DIRECTION('',(-1.,0.,0.)); +#16478 = ORIENTED_EDGE('',*,*,#16479,.F.); +#16479 = EDGE_CURVE('',#16447,#16470,#16480,.T.); +#16480 = LINE('',#16481,#16482); +#16481 = CARTESIAN_POINT('',(0.25,1.51,0.225)); +#16482 = VECTOR('',#16483,1.); +#16483 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16484 = ORIENTED_EDGE('',*,*,#16485,.T.); +#16485 = EDGE_CURVE('',#16447,#16387,#16486,.T.); +#16486 = LINE('',#16487,#16488); +#16487 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16488 = VECTOR('',#16489,1.); +#16489 = DIRECTION('',(-1.,0.,0.)); +#16490 = ORIENTED_EDGE('',*,*,#16491,.T.); +#16491 = EDGE_CURVE('',#16387,#16472,#16492,.T.); +#16492 = LINE('',#16493,#16494); +#16493 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16494 = VECTOR('',#16495,1.); +#16495 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16496 = PLANE('',#16497); +#16497 = AXIS2_PLACEMENT_3D('',#16498,#16499,#16500); +#16498 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16499 = DIRECTION('',(0.,1.,-6.672013369142E-16)); +#16500 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16501 = ADVANCED_FACE('',(#16502),#16513,.T.); +#16502 = FACE_BOUND('',#16503,.T.); +#16503 = EDGE_LOOP('',(#16504,#16505,#16511,#16512)); +#16504 = ORIENTED_EDGE('',*,*,#16479,.T.); +#16505 = ORIENTED_EDGE('',*,*,#16506,.F.); +#16506 = EDGE_CURVE('',#14688,#16470,#16507,.T.); +#16507 = LINE('',#16508,#16509); +#16508 = CARTESIAN_POINT('',(0.25,1.51,0.55)); +#16509 = VECTOR('',#16510,1.); +#16510 = DIRECTION('',(-3.614007241618E-16,1.,-6.672013369142E-16)); +#16511 = ORIENTED_EDGE('',*,*,#14687,.F.); +#16512 = ORIENTED_EDGE('',*,*,#16455,.T.); +#16513 = PLANE('',#16514); +#16514 = AXIS2_PLACEMENT_3D('',#16515,#16516,#16517); +#16515 = CARTESIAN_POINT('',(0.25,1.51,0.225)); +#16516 = DIRECTION('',(1.,3.614007241618E-16,-2.411270463225E-31)); +#16517 = DIRECTION('',(-3.614007241618E-16,1.,0.)); +#16518 = ADVANCED_FACE('',(#16519),#16530,.T.); +#16519 = FACE_BOUND('',#16520,.T.); +#16520 = EDGE_LOOP('',(#16521,#16522,#16528,#16529)); +#16521 = ORIENTED_EDGE('',*,*,#14703,.T.); +#16522 = ORIENTED_EDGE('',*,*,#16523,.F.); +#16523 = EDGE_CURVE('',#16472,#14696,#16524,.T.); +#16524 = LINE('',#16525,#16526); +#16525 = CARTESIAN_POINT('',(-0.25,1.51,0.55)); +#16526 = VECTOR('',#16527,1.); +#16527 = DIRECTION('',(0.,-1.,6.672013369142E-16)); +#16528 = ORIENTED_EDGE('',*,*,#16491,.F.); +#16529 = ORIENTED_EDGE('',*,*,#16386,.T.); +#16530 = PLANE('',#16531); +#16531 = AXIS2_PLACEMENT_3D('',#16532,#16533,#16534); +#16532 = CARTESIAN_POINT('',(-0.25,1.51,0.225)); +#16533 = DIRECTION('',(-1.,0.,0.)); +#16534 = DIRECTION('',(0.,0.,1.)); +#16535 = ADVANCED_FACE('',(#16536),#16547,.T.); +#16536 = FACE_BOUND('',#16537,.T.); +#16537 = EDGE_LOOP('',(#16538,#16539,#16540,#16546)); +#16538 = ORIENTED_EDGE('',*,*,#16485,.F.); +#16539 = ORIENTED_EDGE('',*,*,#16446,.F.); +#16540 = ORIENTED_EDGE('',*,*,#16541,.T.); +#16541 = EDGE_CURVE('',#16439,#16395,#16542,.T.); +#16542 = LINE('',#16543,#16544); +#16543 = CARTESIAN_POINT('',(-0.25,1.285,0.)); +#16544 = VECTOR('',#16545,1.); +#16545 = DIRECTION('',(-1.,0.,-0.)); +#16546 = ORIENTED_EDGE('',*,*,#16394,.T.); +#16547 = CYLINDRICAL_SURFACE('',#16548,0.225); +#16548 = AXIS2_PLACEMENT_3D('',#16549,#16550,#16551); +#16549 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16550 = DIRECTION('',(1.,0.,0.)); +#16551 = DIRECTION('',(0.,0.,-1.)); +#16552 = ADVANCED_FACE('',(#16553),#16564,.F.); +#16553 = FACE_BOUND('',#16554,.F.); +#16554 = EDGE_LOOP('',(#16555,#16561,#16562,#16563)); +#16555 = ORIENTED_EDGE('',*,*,#16556,.F.); +#16556 = EDGE_CURVE('',#16404,#16430,#16557,.T.); +#16557 = LINE('',#16558,#16559); +#16558 = CARTESIAN_POINT('',(-0.25,1.285,0.15)); +#16559 = VECTOR('',#16560,1.); +#16560 = DIRECTION('',(1.,0.,0.)); +#16561 = ORIENTED_EDGE('',*,*,#16411,.T.); +#16562 = ORIENTED_EDGE('',*,*,#15438,.F.); +#16563 = ORIENTED_EDGE('',*,*,#16429,.F.); +#16564 = CYLINDRICAL_SURFACE('',#16565,7.5E-02); +#16565 = AXIS2_PLACEMENT_3D('',#16566,#16567,#16568); +#16566 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16567 = DIRECTION('',(1.,0.,0.)); +#16568 = DIRECTION('',(0.,0.,-1.)); +#16569 = ADVANCED_FACE('',(#16570),#16586,.T.); +#16570 = FACE_BOUND('',#16571,.T.); +#16571 = EDGE_LOOP('',(#16572,#16573,#16579,#16580)); +#16572 = ORIENTED_EDGE('',*,*,#16541,.F.); +#16573 = ORIENTED_EDGE('',*,*,#16574,.F.); +#16574 = EDGE_CURVE('',#16346,#16439,#16575,.T.); +#16575 = LINE('',#16576,#16577); +#16576 = CARTESIAN_POINT('',(0.25,0.283245582288,0.)); +#16577 = VECTOR('',#16578,1.); +#16578 = DIRECTION('',(0.,1.,0.)); +#16579 = ORIENTED_EDGE('',*,*,#16370,.T.); +#16580 = ORIENTED_EDGE('',*,*,#16581,.T.); +#16581 = EDGE_CURVE('',#16322,#16395,#16582,.T.); +#16582 = LINE('',#16583,#16584); +#16583 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.)); +#16584 = VECTOR('',#16585,1.); +#16585 = DIRECTION('',(0.,1.,0.)); +#16586 = PLANE('',#16587); +#16587 = AXIS2_PLACEMENT_3D('',#16588,#16589,#16590); +#16588 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.)); +#16589 = DIRECTION('',(0.,0.,-1.)); +#16590 = DIRECTION('',(-1.,0.,-0.)); +#16591 = ADVANCED_FACE('',(#16592),#16604,.T.); +#16592 = FACE_BOUND('',#16593,.T.); +#16593 = EDGE_LOOP('',(#16594,#16595,#16596,#16602,#16603)); +#16594 = ORIENTED_EDGE('',*,*,#16574,.T.); +#16595 = ORIENTED_EDGE('',*,*,#16438,.F.); +#16596 = ORIENTED_EDGE('',*,*,#16597,.F.); +#16597 = EDGE_CURVE('',#14358,#16430,#16598,.T.); +#16598 = LINE('',#16599,#16600); +#16599 = CARTESIAN_POINT('',(0.25,0.283245582288,0.15)); +#16600 = VECTOR('',#16601,1.); +#16601 = DIRECTION('',(0.,1.,0.)); +#16602 = ORIENTED_EDGE('',*,*,#14357,.F.); +#16603 = ORIENTED_EDGE('',*,*,#16354,.T.); +#16604 = PLANE('',#16605); +#16605 = AXIS2_PLACEMENT_3D('',#16606,#16607,#16608); +#16606 = CARTESIAN_POINT('',(0.25,0.283245582288,0.)); +#16607 = DIRECTION('',(1.,0.,-3.614007241618E-16)); +#16608 = DIRECTION('',(-3.614007241618E-16,0.,-1.)); +#16609 = ADVANCED_FACE('',(#16610),#16621,.T.); +#16610 = FACE_BOUND('',#16611,.T.); +#16611 = EDGE_LOOP('',(#16612,#16618,#16619,#16620)); +#16612 = ORIENTED_EDGE('',*,*,#16613,.F.); +#16613 = EDGE_CURVE('',#14318,#16404,#16614,.T.); +#16614 = LINE('',#16615,#16616); +#16615 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.15)); +#16616 = VECTOR('',#16617,1.); +#16617 = DIRECTION('',(0.,1.,0.)); +#16618 = ORIENTED_EDGE('',*,*,#15562,.T.); +#16619 = ORIENTED_EDGE('',*,*,#16597,.T.); +#16620 = ORIENTED_EDGE('',*,*,#16556,.F.); +#16621 = PLANE('',#16622); +#16622 = AXIS2_PLACEMENT_3D('',#16623,#16624,#16625); +#16623 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.15)); +#16624 = DIRECTION('',(0.,0.,1.)); +#16625 = DIRECTION('',(1.,0.,-0.)); +#16626 = ADVANCED_FACE('',(#16627),#16634,.T.); +#16627 = FACE_BOUND('',#16628,.T.); +#16628 = EDGE_LOOP('',(#16629,#16630,#16631,#16632,#16633)); +#16629 = ORIENTED_EDGE('',*,*,#14325,.T.); +#16630 = ORIENTED_EDGE('',*,*,#16613,.T.); +#16631 = ORIENTED_EDGE('',*,*,#16403,.F.); +#16632 = ORIENTED_EDGE('',*,*,#16581,.F.); +#16633 = ORIENTED_EDGE('',*,*,#16321,.T.); +#16634 = PLANE('',#16635); +#16635 = AXIS2_PLACEMENT_3D('',#16636,#16637,#16638); +#16636 = CARTESIAN_POINT('',(-0.25,0.283245582288,0.)); +#16637 = DIRECTION('',(-1.,0.,0.)); +#16638 = DIRECTION('',(0.,0.,1.)); +#16639 = ADVANCED_FACE('',(#16640),#16646,.T.); +#16640 = FACE_BOUND('',#16641,.T.); +#16641 = EDGE_LOOP('',(#16642,#16643,#16644,#16645)); +#16642 = ORIENTED_EDGE('',*,*,#16506,.T.); +#16643 = ORIENTED_EDGE('',*,*,#16469,.T.); +#16644 = ORIENTED_EDGE('',*,*,#16523,.T.); +#16645 = ORIENTED_EDGE('',*,*,#14695,.T.); +#16646 = PLANE('',#16647); +#16647 = AXIS2_PLACEMENT_3D('',#16648,#16649,#16650); +#16648 = CARTESIAN_POINT('',(0.,1.556736758877,0.55)); +#16649 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16650 = DIRECTION('',(-1.,0.,0.)); +#16651 = ADVANCED_FACE('',(#16652),#16670,.T.); +#16652 = FACE_BOUND('',#16653,.T.); +#16653 = EDGE_LOOP('',(#16654,#16655,#16663)); +#16654 = ORIENTED_EDGE('',*,*,#14381,.F.); +#16655 = ORIENTED_EDGE('',*,*,#16656,.F.); +#16656 = EDGE_CURVE('',#16657,#14374,#16659,.T.); +#16657 = VERTEX_POINT('',#16658); +#16658 = CARTESIAN_POINT('',(0.85,0.283245582288,-1.89735380185E-16)); +#16659 = LINE('',#16660,#16661); +#16660 = CARTESIAN_POINT('',(0.85,0.283245582288,-2.710505431214E-17)); +#16661 = VECTOR('',#16662,1.); +#16662 = DIRECTION('',(0.,0.,1.)); +#16663 = ORIENTED_EDGE('',*,*,#16664,.F.); +#16664 = EDGE_CURVE('',#14382,#16657,#16665,.T.); +#16665 = CIRCLE('',#16666,0.236508823411); +#16666 = AXIS2_PLACEMENT_3D('',#16667,#16668,#16669); +#16667 = CARTESIAN_POINT('',(0.85,0.283245582288,0.236508823411)); +#16668 = DIRECTION('',(1.,0.,0.)); +#16669 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16670 = PLANE('',#16671); +#16671 = AXIS2_PLACEMENT_3D('',#16672,#16673,#16674); +#16672 = CARTESIAN_POINT('',(0.85,4.673675887722E-02,0.236508823411)); +#16673 = DIRECTION('',(-1.,0.,-0.)); +#16674 = DIRECTION('',(0.,0.,1.)); +#16675 = ADVANCED_FACE('',(#16676),#16694,.T.); +#16676 = FACE_BOUND('',#16677,.T.); +#16677 = EDGE_LOOP('',(#16678,#16679,#16688)); +#16678 = ORIENTED_EDGE('',*,*,#14219,.F.); +#16679 = ORIENTED_EDGE('',*,*,#16680,.T.); +#16680 = EDGE_CURVE('',#14220,#16681,#16683,.T.); +#16681 = VERTEX_POINT('',#16682); +#16682 = CARTESIAN_POINT('',(1.5,0.283245582288,-1.89735380185E-16)); +#16683 = CIRCLE('',#16684,0.236508823411); +#16684 = AXIS2_PLACEMENT_3D('',#16685,#16686,#16687); +#16685 = CARTESIAN_POINT('',(1.5,0.283245582288,0.236508823411)); +#16686 = DIRECTION('',(1.,0.,0.)); +#16687 = DIRECTION('',(0.,-1.,3.43814500295E-16)); +#16688 = ORIENTED_EDGE('',*,*,#16689,.F.); +#16689 = EDGE_CURVE('',#14222,#16681,#16690,.T.); +#16690 = LINE('',#16691,#16692); +#16691 = CARTESIAN_POINT('',(1.5,0.283245582288,-2.710505431214E-17)); +#16692 = VECTOR('',#16693,1.); +#16693 = DIRECTION('',(-0.,0.,-1.)); +#16694 = PLANE('',#16695); +#16695 = AXIS2_PLACEMENT_3D('',#16696,#16697,#16698); +#16696 = CARTESIAN_POINT('',(1.5,4.673675887722E-02,0.236508823411)); +#16697 = DIRECTION('',(1.,0.,0.)); +#16698 = DIRECTION('',(0.,0.,-1.)); +#16699 = ADVANCED_FACE('',(#16700),#16711,.T.); +#16700 = FACE_BOUND('',#16701,.T.); +#16701 = EDGE_LOOP('',(#16702,#16703,#16704,#16710)); +#16702 = ORIENTED_EDGE('',*,*,#14389,.F.); +#16703 = ORIENTED_EDGE('',*,*,#16664,.T.); +#16704 = ORIENTED_EDGE('',*,*,#16705,.F.); +#16705 = EDGE_CURVE('',#16681,#16657,#16706,.T.); +#16706 = LINE('',#16707,#16708); +#16707 = CARTESIAN_POINT('',(0.85,0.283245582288,-2.710505431214E-17)); +#16708 = VECTOR('',#16709,1.); +#16709 = DIRECTION('',(-1.,0.,-0.)); +#16710 = ORIENTED_EDGE('',*,*,#16680,.F.); +#16711 = CYLINDRICAL_SURFACE('',#16712,0.236508823411); +#16712 = AXIS2_PLACEMENT_3D('',#16713,#16714,#16715); +#16713 = CARTESIAN_POINT('',(0.,0.283245582288,0.236508823411)); +#16714 = DIRECTION('',(1.,0.,0.)); +#16715 = DIRECTION('',(0.,0.,-1.)); +#16716 = ADVANCED_FACE('',(#16717),#16753,.T.); +#16717 = FACE_BOUND('',#16718,.T.); +#16718 = EDGE_LOOP('',(#16719,#16720,#16728,#16737,#16745,#16752)); +#16719 = ORIENTED_EDGE('',*,*,#14663,.F.); +#16720 = ORIENTED_EDGE('',*,*,#16721,.F.); +#16721 = EDGE_CURVE('',#16722,#14654,#16724,.T.); +#16722 = VERTEX_POINT('',#16723); +#16723 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16724 = LINE('',#16725,#16726); +#16725 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16726 = VECTOR('',#16727,1.); +#16727 = DIRECTION('',(0.,-1.,0.)); +#16728 = ORIENTED_EDGE('',*,*,#16729,.F.); +#16729 = EDGE_CURVE('',#16730,#16722,#16732,.T.); +#16730 = VERTEX_POINT('',#16731); +#16731 = CARTESIAN_POINT('',(0.85,1.285,0.)); +#16732 = CIRCLE('',#16733,0.225); +#16733 = AXIS2_PLACEMENT_3D('',#16734,#16735,#16736); +#16734 = CARTESIAN_POINT('',(0.85,1.285,0.225)); +#16735 = DIRECTION('',(1.,0.,0.)); +#16736 = DIRECTION('',(0.,0.,-1.)); +#16737 = ORIENTED_EDGE('',*,*,#16738,.T.); +#16738 = EDGE_CURVE('',#16730,#16739,#16741,.T.); +#16739 = VERTEX_POINT('',#16740); +#16740 = CARTESIAN_POINT('',(0.85,1.285,0.15)); +#16741 = LINE('',#16742,#16743); +#16742 = CARTESIAN_POINT('',(0.85,1.285,0.)); +#16743 = VECTOR('',#16744,1.); +#16744 = DIRECTION('',(0.,0.,1.)); +#16745 = ORIENTED_EDGE('',*,*,#16746,.T.); +#16746 = EDGE_CURVE('',#16739,#15358,#16747,.T.); +#16747 = CIRCLE('',#16748,7.5E-02); +#16748 = AXIS2_PLACEMENT_3D('',#16749,#16750,#16751); +#16749 = CARTESIAN_POINT('',(0.85,1.285,0.225)); +#16750 = DIRECTION('',(1.,0.,0.)); +#16751 = DIRECTION('',(0.,0.,-1.)); +#16752 = ORIENTED_EDGE('',*,*,#15357,.T.); +#16753 = PLANE('',#16754); +#16754 = AXIS2_PLACEMENT_3D('',#16755,#16756,#16757); +#16755 = CARTESIAN_POINT('',(0.85,1.285,1.355252715607E-16)); +#16756 = DIRECTION('',(-1.,0.,-0.)); +#16757 = DIRECTION('',(0.,0.,1.)); +#16758 = ADVANCED_FACE('',(#16759),#16795,.T.); +#16759 = FACE_BOUND('',#16760,.T.); +#16760 = EDGE_LOOP('',(#16761,#16762,#16763,#16772,#16780,#16789)); +#16761 = ORIENTED_EDGE('',*,*,#14871,.F.); +#16762 = ORIENTED_EDGE('',*,*,#15373,.T.); +#16763 = ORIENTED_EDGE('',*,*,#16764,.F.); +#16764 = EDGE_CURVE('',#16765,#15366,#16767,.T.); +#16765 = VERTEX_POINT('',#16766); +#16766 = CARTESIAN_POINT('',(1.5,1.285,0.15)); +#16767 = CIRCLE('',#16768,7.5E-02); +#16768 = AXIS2_PLACEMENT_3D('',#16769,#16770,#16771); +#16769 = CARTESIAN_POINT('',(1.5,1.285,0.225)); +#16770 = DIRECTION('',(1.,0.,0.)); +#16771 = DIRECTION('',(0.,0.,-1.)); +#16772 = ORIENTED_EDGE('',*,*,#16773,.T.); +#16773 = EDGE_CURVE('',#16765,#16774,#16776,.T.); +#16774 = VERTEX_POINT('',#16775); +#16775 = CARTESIAN_POINT('',(1.5,1.285,0.)); +#16776 = LINE('',#16777,#16778); +#16777 = CARTESIAN_POINT('',(1.5,1.285,0.)); +#16778 = VECTOR('',#16779,1.); +#16779 = DIRECTION('',(-0.,0.,-1.)); +#16780 = ORIENTED_EDGE('',*,*,#16781,.T.); +#16781 = EDGE_CURVE('',#16774,#16782,#16784,.T.); +#16782 = VERTEX_POINT('',#16783); +#16783 = CARTESIAN_POINT('',(1.5,1.51,0.225)); +#16784 = CIRCLE('',#16785,0.225); +#16785 = AXIS2_PLACEMENT_3D('',#16786,#16787,#16788); +#16786 = CARTESIAN_POINT('',(1.5,1.285,0.225)); +#16787 = DIRECTION('',(1.,0.,0.)); +#16788 = DIRECTION('',(0.,0.,-1.)); +#16789 = ORIENTED_EDGE('',*,*,#16790,.F.); +#16790 = EDGE_CURVE('',#14872,#16782,#16791,.T.); +#16791 = LINE('',#16792,#16793); +#16792 = CARTESIAN_POINT('',(1.5,1.51,0.225)); +#16793 = VECTOR('',#16794,1.); +#16794 = DIRECTION('',(-0.,1.,0.)); +#16795 = PLANE('',#16796); +#16796 = AXIS2_PLACEMENT_3D('',#16797,#16798,#16799); +#16797 = CARTESIAN_POINT('',(1.5,1.285,1.355252715607E-16)); +#16798 = DIRECTION('',(1.,0.,0.)); +#16799 = DIRECTION('',(0.,0.,-1.)); +#16800 = ADVANCED_FACE('',(#16801),#16831,.T.); +#16801 = FACE_BOUND('',#16802,.T.); +#16802 = EDGE_LOOP('',(#16803,#16813,#16819,#16825)); +#16803 = ORIENTED_EDGE('',*,*,#16804,.F.); +#16804 = EDGE_CURVE('',#16805,#16807,#16809,.T.); +#16805 = VERTEX_POINT('',#16806); +#16806 = CARTESIAN_POINT('',(1.5,1.51,0.55)); +#16807 = VERTEX_POINT('',#16808); +#16808 = CARTESIAN_POINT('',(0.85,1.51,0.55)); +#16809 = LINE('',#16810,#16811); +#16810 = CARTESIAN_POINT('',(0.85,1.51,0.55)); +#16811 = VECTOR('',#16812,1.); +#16812 = DIRECTION('',(-1.,0.,0.)); +#16813 = ORIENTED_EDGE('',*,*,#16814,.F.); +#16814 = EDGE_CURVE('',#16782,#16805,#16815,.T.); +#16815 = LINE('',#16816,#16817); +#16816 = CARTESIAN_POINT('',(1.5,1.51,0.225)); +#16817 = VECTOR('',#16818,1.); +#16818 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16819 = ORIENTED_EDGE('',*,*,#16820,.T.); +#16820 = EDGE_CURVE('',#16782,#16722,#16821,.T.); +#16821 = LINE('',#16822,#16823); +#16822 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16823 = VECTOR('',#16824,1.); +#16824 = DIRECTION('',(-1.,0.,0.)); +#16825 = ORIENTED_EDGE('',*,*,#16826,.T.); +#16826 = EDGE_CURVE('',#16722,#16807,#16827,.T.); +#16827 = LINE('',#16828,#16829); +#16828 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16829 = VECTOR('',#16830,1.); +#16830 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16831 = PLANE('',#16832); +#16832 = AXIS2_PLACEMENT_3D('',#16833,#16834,#16835); +#16833 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16834 = DIRECTION('',(0.,1.,-6.672013369142E-16)); +#16835 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16836 = ADVANCED_FACE('',(#16837),#16848,.T.); +#16837 = FACE_BOUND('',#16838,.T.); +#16838 = EDGE_LOOP('',(#16839,#16840,#16846,#16847)); +#16839 = ORIENTED_EDGE('',*,*,#16814,.T.); +#16840 = ORIENTED_EDGE('',*,*,#16841,.F.); +#16841 = EDGE_CURVE('',#14880,#16805,#16842,.T.); +#16842 = LINE('',#16843,#16844); +#16843 = CARTESIAN_POINT('',(1.5,1.51,0.55)); +#16844 = VECTOR('',#16845,1.); +#16845 = DIRECTION('',(-0.,1.,-6.672013369142E-16)); +#16846 = ORIENTED_EDGE('',*,*,#14879,.F.); +#16847 = ORIENTED_EDGE('',*,*,#16790,.T.); +#16848 = PLANE('',#16849); +#16849 = AXIS2_PLACEMENT_3D('',#16850,#16851,#16852); +#16850 = CARTESIAN_POINT('',(1.5,1.51,0.225)); +#16851 = DIRECTION('',(1.,0.,-0.)); +#16852 = DIRECTION('',(-0.,0.,-1.)); +#16853 = ADVANCED_FACE('',(#16854),#16865,.T.); +#16854 = FACE_BOUND('',#16855,.T.); +#16855 = EDGE_LOOP('',(#16856,#16857,#16863,#16864)); +#16856 = ORIENTED_EDGE('',*,*,#14653,.T.); +#16857 = ORIENTED_EDGE('',*,*,#16858,.F.); +#16858 = EDGE_CURVE('',#16807,#14656,#16859,.T.); +#16859 = LINE('',#16860,#16861); +#16860 = CARTESIAN_POINT('',(0.85,1.51,0.55)); +#16861 = VECTOR('',#16862,1.); +#16862 = DIRECTION('',(0.,-1.,6.672013369142E-16)); +#16863 = ORIENTED_EDGE('',*,*,#16826,.F.); +#16864 = ORIENTED_EDGE('',*,*,#16721,.T.); +#16865 = PLANE('',#16866); +#16866 = AXIS2_PLACEMENT_3D('',#16867,#16868,#16869); +#16867 = CARTESIAN_POINT('',(0.85,1.51,0.225)); +#16868 = DIRECTION('',(-1.,0.,0.)); +#16869 = DIRECTION('',(0.,0.,1.)); +#16870 = ADVANCED_FACE('',(#16871),#16882,.T.); +#16871 = FACE_BOUND('',#16872,.T.); +#16872 = EDGE_LOOP('',(#16873,#16874,#16875,#16881)); +#16873 = ORIENTED_EDGE('',*,*,#16820,.F.); +#16874 = ORIENTED_EDGE('',*,*,#16781,.F.); +#16875 = ORIENTED_EDGE('',*,*,#16876,.T.); +#16876 = EDGE_CURVE('',#16774,#16730,#16877,.T.); +#16877 = LINE('',#16878,#16879); +#16878 = CARTESIAN_POINT('',(0.85,1.285,0.)); +#16879 = VECTOR('',#16880,1.); +#16880 = DIRECTION('',(-1.,0.,-0.)); +#16881 = ORIENTED_EDGE('',*,*,#16729,.T.); +#16882 = CYLINDRICAL_SURFACE('',#16883,0.225); +#16883 = AXIS2_PLACEMENT_3D('',#16884,#16885,#16886); +#16884 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16885 = DIRECTION('',(1.,0.,0.)); +#16886 = DIRECTION('',(0.,0.,-1.)); +#16887 = ADVANCED_FACE('',(#16888),#16899,.F.); +#16888 = FACE_BOUND('',#16889,.F.); +#16889 = EDGE_LOOP('',(#16890,#16896,#16897,#16898)); +#16890 = ORIENTED_EDGE('',*,*,#16891,.F.); +#16891 = EDGE_CURVE('',#16739,#16765,#16892,.T.); +#16892 = LINE('',#16893,#16894); +#16893 = CARTESIAN_POINT('',(0.85,1.285,0.15)); +#16894 = VECTOR('',#16895,1.); +#16895 = DIRECTION('',(1.,0.,-1.251002506714E-16)); +#16896 = ORIENTED_EDGE('',*,*,#16746,.T.); +#16897 = ORIENTED_EDGE('',*,*,#15365,.F.); +#16898 = ORIENTED_EDGE('',*,*,#16764,.F.); +#16899 = CYLINDRICAL_SURFACE('',#16900,7.5E-02); +#16900 = AXIS2_PLACEMENT_3D('',#16901,#16902,#16903); +#16901 = CARTESIAN_POINT('',(0.,1.285,0.225)); +#16902 = DIRECTION('',(1.,0.,0.)); +#16903 = DIRECTION('',(0.,0.,-1.)); +#16904 = ADVANCED_FACE('',(#16905),#16921,.T.); +#16905 = FACE_BOUND('',#16906,.T.); +#16906 = EDGE_LOOP('',(#16907,#16908,#16914,#16915)); +#16907 = ORIENTED_EDGE('',*,*,#16876,.F.); +#16908 = ORIENTED_EDGE('',*,*,#16909,.F.); +#16909 = EDGE_CURVE('',#16681,#16774,#16910,.T.); +#16910 = LINE('',#16911,#16912); +#16911 = CARTESIAN_POINT('',(1.5,0.283245582288,0.)); +#16912 = VECTOR('',#16913,1.); +#16913 = DIRECTION('',(0.,1.,0.)); +#16914 = ORIENTED_EDGE('',*,*,#16705,.T.); +#16915 = ORIENTED_EDGE('',*,*,#16916,.T.); +#16916 = EDGE_CURVE('',#16657,#16730,#16917,.T.); +#16917 = LINE('',#16918,#16919); +#16918 = CARTESIAN_POINT('',(0.85,0.283245582288,0.)); +#16919 = VECTOR('',#16920,1.); +#16920 = DIRECTION('',(0.,1.,0.)); +#16921 = PLANE('',#16922); +#16922 = AXIS2_PLACEMENT_3D('',#16923,#16924,#16925); +#16923 = CARTESIAN_POINT('',(0.85,0.283245582288,0.)); +#16924 = DIRECTION('',(0.,0.,-1.)); +#16925 = DIRECTION('',(-1.,0.,-0.)); +#16926 = ADVANCED_FACE('',(#16927),#16939,.T.); +#16927 = FACE_BOUND('',#16928,.T.); +#16928 = EDGE_LOOP('',(#16929,#16930,#16931,#16937,#16938)); +#16929 = ORIENTED_EDGE('',*,*,#16909,.T.); +#16930 = ORIENTED_EDGE('',*,*,#16773,.F.); +#16931 = ORIENTED_EDGE('',*,*,#16932,.F.); +#16932 = EDGE_CURVE('',#14230,#16765,#16933,.T.); +#16933 = LINE('',#16934,#16935); +#16934 = CARTESIAN_POINT('',(1.5,0.283245582288,0.15)); +#16935 = VECTOR('',#16936,1.); +#16936 = DIRECTION('',(0.,1.,0.)); +#16937 = ORIENTED_EDGE('',*,*,#14229,.F.); +#16938 = ORIENTED_EDGE('',*,*,#16689,.T.); +#16939 = PLANE('',#16940); +#16940 = AXIS2_PLACEMENT_3D('',#16941,#16942,#16943); +#16941 = CARTESIAN_POINT('',(1.5,0.283245582288,0.)); +#16942 = DIRECTION('',(1.,0.,-0.)); +#16943 = DIRECTION('',(-0.,0.,-1.)); +#16944 = ADVANCED_FACE('',(#16945),#16956,.T.); +#16945 = FACE_BOUND('',#16946,.T.); +#16946 = EDGE_LOOP('',(#16947,#16953,#16954,#16955)); +#16947 = ORIENTED_EDGE('',*,*,#16948,.F.); +#16948 = EDGE_CURVE('',#14366,#16739,#16949,.T.); +#16949 = LINE('',#16950,#16951); +#16950 = CARTESIAN_POINT('',(0.85,0.283245582288,0.15)); +#16951 = VECTOR('',#16952,1.); +#16952 = DIRECTION('',(0.,1.,0.)); +#16953 = ORIENTED_EDGE('',*,*,#15555,.T.); +#16954 = ORIENTED_EDGE('',*,*,#16932,.T.); +#16955 = ORIENTED_EDGE('',*,*,#16891,.F.); +#16956 = PLANE('',#16957); +#16957 = AXIS2_PLACEMENT_3D('',#16958,#16959,#16960); +#16958 = CARTESIAN_POINT('',(0.85,0.283245582288,0.15)); +#16959 = DIRECTION('',(1.251002506714E-16,-0.,1.)); +#16960 = DIRECTION('',(1.,0.,-1.251002506714E-16)); +#16961 = ADVANCED_FACE('',(#16962),#16969,.T.); +#16962 = FACE_BOUND('',#16963,.T.); +#16963 = EDGE_LOOP('',(#16964,#16965,#16966,#16967,#16968)); +#16964 = ORIENTED_EDGE('',*,*,#14373,.T.); +#16965 = ORIENTED_EDGE('',*,*,#16948,.T.); +#16966 = ORIENTED_EDGE('',*,*,#16738,.F.); +#16967 = ORIENTED_EDGE('',*,*,#16916,.F.); +#16968 = ORIENTED_EDGE('',*,*,#16656,.T.); +#16969 = PLANE('',#16970); +#16970 = AXIS2_PLACEMENT_3D('',#16971,#16972,#16973); +#16971 = CARTESIAN_POINT('',(0.85,0.283245582288,0.)); +#16972 = DIRECTION('',(-1.,0.,0.)); +#16973 = DIRECTION('',(0.,0.,1.)); +#16974 = ADVANCED_FACE('',(#16975),#16981,.T.); +#16975 = FACE_BOUND('',#16976,.T.); +#16976 = EDGE_LOOP('',(#16977,#16978,#16979,#16980)); +#16977 = ORIENTED_EDGE('',*,*,#16841,.T.); +#16978 = ORIENTED_EDGE('',*,*,#16804,.T.); +#16979 = ORIENTED_EDGE('',*,*,#16858,.T.); +#16980 = ORIENTED_EDGE('',*,*,#14887,.T.); +#16981 = PLANE('',#16982); +#16982 = AXIS2_PLACEMENT_3D('',#16983,#16984,#16985); +#16983 = CARTESIAN_POINT('',(0.,1.556736758877,0.55)); +#16984 = DIRECTION('',(0.,6.672013369142E-16,1.)); +#16985 = DIRECTION('',(-1.,0.,0.)); +#16986 = ADVANCED_FACE('',(#16987),#16993,.T.); +#16987 = FACE_BOUND('',#16988,.T.); +#16988 = EDGE_LOOP('',(#16989,#16990,#16991,#16992)); +#16989 = ORIENTED_EDGE('',*,*,#13810,.F.); +#16990 = ORIENTED_EDGE('',*,*,#13759,.T.); +#16991 = ORIENTED_EDGE('',*,*,#13827,.T.); +#16992 = ORIENTED_EDGE('',*,*,#15780,.T.); +#16993 = CONICAL_SURFACE('',#16994,1.,5.235987755983E-02); +#16994 = AXIS2_PLACEMENT_3D('',#16995,#16996,#16997); +#16995 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#16996 = DIRECTION('',(-0.,1.,-0.)); +#16997 = DIRECTION('',(0.,0.,-1.)); +#16998 = ADVANCED_FACE('',(#16999),#17009,.T.); +#16999 = FACE_BOUND('',#17000,.T.); +#17000 = EDGE_LOOP('',(#17001,#17002)); +#17001 = ORIENTED_EDGE('',*,*,#13779,.T.); +#17002 = ORIENTED_EDGE('',*,*,#17003,.T.); +#17003 = EDGE_CURVE('',#13771,#13780,#17004,.T.); +#17004 = CIRCLE('',#17005,0.80524753571); +#17005 = AXIS2_PLACEMENT_3D('',#17006,#17007,#17008); +#17006 = CARTESIAN_POINT('',(-4.336808689942E-16,-2.05,1.75)); +#17007 = DIRECTION('',(0.,-1.,0.)); +#17008 = DIRECTION('',(0.,0.,-1.)); +#17009 = PLANE('',#17010); +#17010 = AXIS2_PLACEMENT_3D('',#17011,#17012,#17013); +#17011 = CARTESIAN_POINT('',(-4.336808689942E-16,-2.05,1.75)); +#17012 = DIRECTION('',(0.,-1.,0.)); +#17013 = DIRECTION('',(0.,-0.,-1.)); +#17014 = ADVANCED_FACE('',(#17015),#17021,.T.); +#17015 = FACE_BOUND('',#17016,.T.); +#17016 = EDGE_LOOP('',(#17017,#17018,#17019,#17020)); +#17017 = ORIENTED_EDGE('',*,*,#13770,.F.); +#17018 = ORIENTED_EDGE('',*,*,#13803,.F.); +#17019 = ORIENTED_EDGE('',*,*,#13788,.T.); +#17020 = ORIENTED_EDGE('',*,*,#17003,.F.); +#17021 = TOROIDAL_SURFACE('',#17022,0.80524753571,0.15); +#17022 = AXIS2_PLACEMENT_3D('',#17023,#17024,#17025); +#17023 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.9,1.75)); +#17024 = DIRECTION('',(0.,-1.,0.)); +#17025 = DIRECTION('',(0.,0.,-1.)); +#17026 = ADVANCED_FACE('',(#17027),#17052,.T.); +#17027 = FACE_BOUND('',#17028,.T.); +#17028 = EDGE_LOOP('',(#17029,#17030,#17038,#17046)); +#17029 = ORIENTED_EDGE('',*,*,#14397,.F.); +#17030 = ORIENTED_EDGE('',*,*,#17031,.F.); +#17031 = EDGE_CURVE('',#17032,#14398,#17034,.T.); +#17032 = VERTEX_POINT('',#17033); +#17033 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.151)); +#17034 = LINE('',#17035,#17036); +#17035 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.151)); +#17036 = VECTOR('',#17037,1.); +#17037 = DIRECTION('',(-0.,-0.,-1.)); +#17038 = ORIENTED_EDGE('',*,*,#17039,.T.); +#17039 = EDGE_CURVE('',#17032,#17040,#17042,.T.); +#17040 = VERTEX_POINT('',#17041); +#17041 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.151)); +#17042 = LINE('',#17043,#17044); +#17043 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.151)); +#17044 = VECTOR('',#17045,1.); +#17045 = DIRECTION('',(-0.363542485653,-0.931577619485,0.)); +#17046 = ORIENTED_EDGE('',*,*,#17047,.T.); +#17047 = EDGE_CURVE('',#17040,#14400,#17048,.T.); +#17048 = LINE('',#17049,#17050); +#17049 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.151)); +#17050 = VECTOR('',#17051,1.); +#17051 = DIRECTION('',(-0.,-0.,-1.)); +#17052 = PLANE('',#17053); +#17053 = AXIS2_PLACEMENT_3D('',#17054,#17055,#17056); +#17054 = CARTESIAN_POINT('',(-0.423780487805,2.983377077866E-02,0.151)); +#17055 = DIRECTION('',(0.931577619485,-0.363542485653,0.)); +#17056 = DIRECTION('',(0.363542485653,0.931577619485,0.)); +#17057 = ADVANCED_FACE('',(#17058),#17076,.T.); +#17058 = FACE_BOUND('',#17059,.T.); +#17059 = EDGE_LOOP('',(#17060,#17061,#17062,#17070)); +#17060 = ORIENTED_EDGE('',*,*,#14407,.F.); +#17061 = ORIENTED_EDGE('',*,*,#17047,.F.); +#17062 = ORIENTED_EDGE('',*,*,#17063,.T.); +#17063 = EDGE_CURVE('',#17040,#17064,#17066,.T.); +#17064 = VERTEX_POINT('',#17065); +#17065 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.151)); +#17066 = LINE('',#17067,#17068); +#17067 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.151)); +#17068 = VECTOR('',#17069,1.); +#17069 = DIRECTION('',(1.,0.,0.)); +#17070 = ORIENTED_EDGE('',*,*,#17071,.T.); +#17071 = EDGE_CURVE('',#17064,#14408,#17072,.T.); +#17072 = LINE('',#17073,#17074); +#17073 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.151)); +#17074 = VECTOR('',#17075,1.); +#17075 = DIRECTION('',(-0.,-0.,-1.)); +#17076 = PLANE('',#17077); +#17077 = AXIS2_PLACEMENT_3D('',#17078,#17079,#17080); +#17078 = CARTESIAN_POINT('',(-0.521341463415,-0.220166229221,0.151)); +#17079 = DIRECTION('',(0.,1.,0.)); +#17080 = DIRECTION('',(0.,-0.,1.)); +#17081 = ADVANCED_FACE('',(#17082),#17100,.T.); +#17082 = FACE_BOUND('',#17083,.T.); +#17083 = EDGE_LOOP('',(#17084,#17085,#17086,#17094)); +#17084 = ORIENTED_EDGE('',*,*,#14415,.F.); +#17085 = ORIENTED_EDGE('',*,*,#17071,.F.); +#17086 = ORIENTED_EDGE('',*,*,#17087,.T.); +#17087 = EDGE_CURVE('',#17064,#17088,#17090,.T.); +#17088 = VERTEX_POINT('',#17089); +#17089 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.151)); +#17090 = LINE('',#17091,#17092); +#17091 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.151)); +#17092 = VECTOR('',#17093,1.); +#17093 = DIRECTION('',(0.339330377275,0.940667260544,0.)); +#17094 = ORIENTED_EDGE('',*,*,#17095,.T.); +#17095 = EDGE_CURVE('',#17088,#14416,#17096,.T.); +#17096 = LINE('',#17097,#17098); +#17097 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.151)); +#17098 = VECTOR('',#17099,1.); +#17099 = DIRECTION('',(-0.,-0.,-1.)); +#17100 = PLANE('',#17101); +#17101 = AXIS2_PLACEMENT_3D('',#17102,#17103,#17104); +#17102 = CARTESIAN_POINT('',(-0.484756097561,-0.220166229221,0.151)); +#17103 = DIRECTION('',(-0.940667260544,0.339330377275,0.)); +#17104 = DIRECTION('',(-0.339330377275,-0.940667260544,0.)); +#17105 = ADVANCED_FACE('',(#17106),#17124,.T.); +#17106 = FACE_BOUND('',#17107,.T.); +#17107 = EDGE_LOOP('',(#17108,#17109,#17110,#17118)); +#17108 = ORIENTED_EDGE('',*,*,#14423,.F.); +#17109 = ORIENTED_EDGE('',*,*,#17095,.F.); +#17110 = ORIENTED_EDGE('',*,*,#17111,.T.); +#17111 = EDGE_CURVE('',#17088,#17112,#17114,.T.); +#17112 = VERTEX_POINT('',#17113); +#17113 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.151)); +#17114 = LINE('',#17115,#17116); +#17115 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.151)); +#17116 = VECTOR('',#17117,1.); +#17117 = DIRECTION('',(1.,0.,0.)); +#17118 = ORIENTED_EDGE('',*,*,#17119,.T.); +#17119 = EDGE_CURVE('',#17112,#14424,#17120,.T.); +#17120 = LINE('',#17121,#17122); +#17121 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.151)); +#17122 = VECTOR('',#17123,1.); +#17123 = DIRECTION('',(-0.,-0.,-1.)); +#17124 = PLANE('',#17125); +#17125 = AXIS2_PLACEMENT_3D('',#17126,#17127,#17128); +#17126 = CARTESIAN_POINT('',(-0.459460746951,-0.150044278002,0.151)); +#17127 = DIRECTION('',(0.,1.,0.)); +#17128 = DIRECTION('',(0.,-0.,1.)); +#17129 = ADVANCED_FACE('',(#17130),#17148,.T.); +#17130 = FACE_BOUND('',#17131,.T.); +#17131 = EDGE_LOOP('',(#17132,#17133,#17134,#17142)); +#17132 = ORIENTED_EDGE('',*,*,#14431,.F.); +#17133 = ORIENTED_EDGE('',*,*,#17119,.F.); +#17134 = ORIENTED_EDGE('',*,*,#17135,.T.); +#17135 = EDGE_CURVE('',#17112,#17136,#17138,.T.); +#17136 = VERTEX_POINT('',#17137); +#17137 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.151)); +#17138 = LINE('',#17139,#17140); +#17139 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.151)); +#17140 = VECTOR('',#17141,1.); +#17141 = DIRECTION('',(0.322202485606,-0.946670776072,0.)); +#17142 = ORIENTED_EDGE('',*,*,#17143,.T.); +#17143 = EDGE_CURVE('',#17136,#14432,#17144,.T.); +#17144 = LINE('',#17145,#17146); +#17145 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.151)); +#17146 = VECTOR('',#17147,1.); +#17147 = DIRECTION('',(-0.,-0.,-1.)); +#17148 = PLANE('',#17149); +#17149 = AXIS2_PLACEMENT_3D('',#17150,#17151,#17152); +#17150 = CARTESIAN_POINT('',(-0.356183307927,-0.150044278002,0.151)); +#17151 = DIRECTION('',(0.946670776072,0.322202485606,-0.)); +#17152 = DIRECTION('',(-0.322202485606,0.946670776072,0.)); +#17153 = ADVANCED_FACE('',(#17154),#17172,.T.); +#17154 = FACE_BOUND('',#17155,.T.); +#17155 = EDGE_LOOP('',(#17156,#17157,#17158,#17166)); +#17156 = ORIENTED_EDGE('',*,*,#14439,.F.); +#17157 = ORIENTED_EDGE('',*,*,#17143,.F.); +#17158 = ORIENTED_EDGE('',*,*,#17159,.T.); +#17159 = EDGE_CURVE('',#17136,#17160,#17162,.T.); +#17160 = VERTEX_POINT('',#17161); +#17161 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.151)); +#17162 = LINE('',#17163,#17164); +#17163 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.151)); +#17164 = VECTOR('',#17165,1.); +#17165 = DIRECTION('',(1.,0.,0.)); +#17166 = ORIENTED_EDGE('',*,*,#17167,.T.); +#17167 = EDGE_CURVE('',#17160,#14440,#17168,.T.); +#17168 = LINE('',#17169,#17170); +#17169 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.151)); +#17170 = VECTOR('',#17171,1.); +#17171 = DIRECTION('',(-0.,-0.,-1.)); +#17172 = PLANE('',#17173); +#17173 = AXIS2_PLACEMENT_3D('',#17174,#17175,#17176); +#17174 = CARTESIAN_POINT('',(-0.332317073171,-0.220166229221,0.151)); +#17175 = DIRECTION('',(0.,1.,0.)); +#17176 = DIRECTION('',(0.,-0.,1.)); +#17177 = ADVANCED_FACE('',(#17178),#17196,.T.); +#17178 = FACE_BOUND('',#17179,.T.); +#17179 = EDGE_LOOP('',(#17180,#17181,#17182,#17190)); +#17180 = ORIENTED_EDGE('',*,*,#14447,.F.); +#17181 = ORIENTED_EDGE('',*,*,#17167,.F.); +#17182 = ORIENTED_EDGE('',*,*,#17183,.T.); +#17183 = EDGE_CURVE('',#17160,#17184,#17186,.T.); +#17184 = VERTEX_POINT('',#17185); +#17185 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.151)); +#17186 = LINE('',#17187,#17188); +#17187 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.151)); +#17188 = VECTOR('',#17189,1.); +#17189 = DIRECTION('',(-0.353622392329,0.93538826358,0.)); +#17190 = ORIENTED_EDGE('',*,*,#17191,.T.); +#17191 = EDGE_CURVE('',#17184,#14448,#17192,.T.); +#17192 = LINE('',#17193,#17194); +#17193 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.151)); +#17194 = VECTOR('',#17195,1.); +#17195 = DIRECTION('',(-0.,-0.,-1.)); +#17196 = PLANE('',#17197); +#17197 = AXIS2_PLACEMENT_3D('',#17198,#17199,#17200); +#17198 = CARTESIAN_POINT('',(-0.295731707317,-0.220166229221,0.151)); +#17199 = DIRECTION('',(-0.93538826358,-0.353622392329,0.)); +#17200 = DIRECTION('',(0.353622392329,-0.93538826358,0.)); +#17201 = ADVANCED_FACE('',(#17202),#17213,.T.); +#17202 = FACE_BOUND('',#17203,.T.); +#17203 = EDGE_LOOP('',(#17204,#17205,#17206,#17212)); +#17204 = ORIENTED_EDGE('',*,*,#14455,.F.); +#17205 = ORIENTED_EDGE('',*,*,#17191,.F.); +#17206 = ORIENTED_EDGE('',*,*,#17207,.T.); +#17207 = EDGE_CURVE('',#17184,#17032,#17208,.T.); +#17208 = LINE('',#17209,#17210); +#17209 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.151)); +#17210 = VECTOR('',#17211,1.); +#17211 = DIRECTION('',(-1.,0.,0.)); +#17212 = ORIENTED_EDGE('',*,*,#17031,.T.); +#17213 = PLANE('',#17214); +#17214 = AXIS2_PLACEMENT_3D('',#17215,#17216,#17217); +#17215 = CARTESIAN_POINT('',(-0.390243902439,2.983377077866E-02,0.151)); +#17216 = DIRECTION('',(0.,-1.,0.)); +#17217 = DIRECTION('',(0.,-0.,-1.)); +#17218 = ADVANCED_FACE('',(#17219,#17277),#17287,.F.); +#17219 = FACE_BOUND('',#17220,.T.); +#17220 = EDGE_LOOP('',(#17221,#17231,#17239,#17251,#17259,#17271)); +#17221 = ORIENTED_EDGE('',*,*,#17222,.F.); +#17222 = EDGE_CURVE('',#17223,#17225,#17227,.T.); +#17223 = VERTEX_POINT('',#17224); +#17224 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.151)); +#17225 = VERTEX_POINT('',#17226); +#17226 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.151)); +#17227 = LINE('',#17228,#17229); +#17228 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.151)); +#17229 = VECTOR('',#17230,1.); +#17230 = DIRECTION('',(-1.,0.,0.)); +#17231 = ORIENTED_EDGE('',*,*,#17232,.F.); +#17232 = EDGE_CURVE('',#17233,#17223,#17235,.T.); +#17233 = VERTEX_POINT('',#17234); +#17234 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17235 = LINE('',#17236,#17237); +#17236 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17237 = VECTOR('',#17238,1.); +#17238 = DIRECTION('',(0.336390827665,-0.941722470297,0.)); +#17239 = ORIENTED_EDGE('',*,*,#17240,.F.); +#17240 = EDGE_CURVE('',#17241,#17233,#17243,.T.); +#17241 = VERTEX_POINT('',#17242); +#17242 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.151) + ); +#17243 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17244,#17245,#17246,#17247, + #17248,#17249,#17250),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.300541113159,0.567747146484,0.800033613737,1.),.UNSPECIFIED.); +#17244 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.151) + ); +#17245 = CARTESIAN_POINT('',(-0.405625019016,-2.434257171443E-03,0.151) + ); +#17246 = CARTESIAN_POINT('',(-0.405074312335,-5.797246542985E-03,0.151) + ); +#17247 = CARTESIAN_POINT('',(-0.404144690283,-1.050949090729E-02,0.151) + ); +#17248 = CARTESIAN_POINT('',(-0.403109655135,-1.458194371313E-02,0.151) + ); +#17249 = CARTESIAN_POINT('',(-0.402292871226,-1.704505240258E-02,0.151) + ); +#17250 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17251 = ORIENTED_EDGE('',*,*,#17252,.F.); +#17252 = EDGE_CURVE('',#17253,#17241,#17255,.T.); +#17253 = VERTEX_POINT('',#17254); +#17254 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17255 = LINE('',#17256,#17257); +#17256 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17257 = VECTOR('',#17258,1.); +#17258 = DIRECTION('',(1.,0.,0.)); +#17259 = ORIENTED_EDGE('',*,*,#17260,.F.); +#17260 = EDGE_CURVE('',#17261,#17253,#17263,.T.); +#17261 = VERTEX_POINT('',#17262); +#17262 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.151) + ); +#17263 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17264,#17265,#17266,#17267, + #17268,#17269,#17270),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.174481715317,0.398285759128,0.673897847399,1.),.UNSPECIFIED.); +#17264 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.151) + ); +#17265 = CARTESIAN_POINT('',(-0.410273008475,-1.718706329099E-02,0.151) + ); +#17266 = CARTESIAN_POINT('',(-0.40956086675,-1.491018539426E-02,0.151)); +#17267 = CARTESIAN_POINT('',(-0.408627664757,-1.09804205008E-02,0.151)); +#17268 = CARTESIAN_POINT('',(-0.40771271877,-6.122007505996E-03,0.151)); +#17269 = CARTESIAN_POINT('',(-0.407073045952,-2.575877592136E-03,0.151) + ); +#17270 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17271 = ORIENTED_EDGE('',*,*,#17272,.F.); +#17272 = EDGE_CURVE('',#17225,#17261,#17273,.T.); +#17273 = LINE('',#17274,#17275); +#17274 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.151)); +#17275 = VECTOR('',#17276,1.); +#17276 = DIRECTION('',(0.339053795485,0.940766986967,0.)); +#17277 = FACE_BOUND('',#17278,.T.); +#17278 = EDGE_LOOP('',(#17279,#17280,#17281,#17282,#17283,#17284,#17285, + #17286)); +#17279 = ORIENTED_EDGE('',*,*,#17039,.F.); +#17280 = ORIENTED_EDGE('',*,*,#17207,.F.); +#17281 = ORIENTED_EDGE('',*,*,#17183,.F.); +#17282 = ORIENTED_EDGE('',*,*,#17159,.F.); +#17283 = ORIENTED_EDGE('',*,*,#17135,.F.); +#17284 = ORIENTED_EDGE('',*,*,#17111,.F.); +#17285 = ORIENTED_EDGE('',*,*,#17087,.F.); +#17286 = ORIENTED_EDGE('',*,*,#17063,.F.); +#17287 = PLANE('',#17288); +#17288 = AXIS2_PLACEMENT_3D('',#17289,#17290,#17291); +#17289 = CARTESIAN_POINT('',(0.,0.,0.151)); +#17290 = DIRECTION('',(-0.,0.,1.)); +#17291 = DIRECTION('',(1.,0.,0.)); +#17292 = ADVANCED_FACE('',(#17293),#17318,.T.); +#17293 = FACE_BOUND('',#17294,.T.); +#17294 = EDGE_LOOP('',(#17295,#17305,#17311,#17312)); +#17295 = ORIENTED_EDGE('',*,*,#17296,.F.); +#17296 = EDGE_CURVE('',#17297,#17299,#17301,.T.); +#17297 = VERTEX_POINT('',#17298); +#17298 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.15)); +#17299 = VERTEX_POINT('',#17300); +#17300 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.15)); +#17301 = LINE('',#17302,#17303); +#17302 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.15)); +#17303 = VECTOR('',#17304,1.); +#17304 = DIRECTION('',(-1.,0.,0.)); +#17305 = ORIENTED_EDGE('',*,*,#17306,.F.); +#17306 = EDGE_CURVE('',#17223,#17297,#17307,.T.); +#17307 = LINE('',#17308,#17309); +#17308 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.151)); +#17309 = VECTOR('',#17310,1.); +#17310 = DIRECTION('',(-0.,-0.,-1.)); +#17311 = ORIENTED_EDGE('',*,*,#17222,.T.); +#17312 = ORIENTED_EDGE('',*,*,#17313,.T.); +#17313 = EDGE_CURVE('',#17225,#17299,#17314,.T.); +#17314 = LINE('',#17315,#17316); +#17315 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.151)); +#17316 = VECTOR('',#17317,1.); +#17317 = DIRECTION('',(-0.,-0.,-1.)); +#17318 = PLANE('',#17319); +#17319 = AXIS2_PLACEMENT_3D('',#17320,#17321,#17322); +#17320 = CARTESIAN_POINT('',(-0.364615091463,-0.122605253612,0.151)); +#17321 = DIRECTION('',(0.,-1.,0.)); +#17322 = DIRECTION('',(0.,-0.,-1.)); +#17323 = ADVANCED_FACE('',(#17324),#17342,.T.); +#17324 = FACE_BOUND('',#17325,.T.); +#17325 = EDGE_LOOP('',(#17326,#17334,#17340,#17341)); +#17326 = ORIENTED_EDGE('',*,*,#17327,.F.); +#17327 = EDGE_CURVE('',#17328,#17297,#17330,.T.); +#17328 = VERTEX_POINT('',#17329); +#17329 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.15)); +#17330 = LINE('',#17331,#17332); +#17331 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.15)); +#17332 = VECTOR('',#17333,1.); +#17333 = DIRECTION('',(0.336390827665,-0.941722470297,0.)); +#17334 = ORIENTED_EDGE('',*,*,#17335,.F.); +#17335 = EDGE_CURVE('',#17233,#17328,#17336,.T.); +#17336 = LINE('',#17337,#17338); +#17337 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17338 = VECTOR('',#17339,1.); +#17339 = DIRECTION('',(-0.,-0.,-1.)); +#17340 = ORIENTED_EDGE('',*,*,#17232,.T.); +#17341 = ORIENTED_EDGE('',*,*,#17306,.T.); +#17342 = PLANE('',#17343); +#17343 = AXIS2_PLACEMENT_3D('',#17344,#17345,#17346); +#17344 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17345 = DIRECTION('',(0.941722470297,0.336390827665,-0.)); +#17346 = DIRECTION('',(-0.336390827665,0.941722470297,0.)); +#17347 = ADVANCED_FACE('',(#17348),#17370,.T.); +#17348 = FACE_BOUND('',#17349,.T.); +#17349 = EDGE_LOOP('',(#17350,#17362,#17368,#17369)); +#17350 = ORIENTED_EDGE('',*,*,#17351,.F.); +#17351 = EDGE_CURVE('',#17352,#17328,#17354,.T.); +#17352 = VERTEX_POINT('',#17353); +#17353 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.15)); +#17354 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17355,#17356,#17357,#17358, + #17359,#17360,#17361),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.300541113159,0.567747146484,0.800033613737,1.),.UNSPECIFIED.); +#17355 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.15)); +#17356 = CARTESIAN_POINT('',(-0.405625019016,-2.434257171443E-03,0.15)); +#17357 = CARTESIAN_POINT('',(-0.405074312335,-5.797246542985E-03,0.15)); +#17358 = CARTESIAN_POINT('',(-0.404144690283,-1.050949090729E-02,0.15)); +#17359 = CARTESIAN_POINT('',(-0.403109655135,-1.458194371313E-02,0.15)); +#17360 = CARTESIAN_POINT('',(-0.402292871226,-1.704505240258E-02,0.15)); +#17361 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.15)); +#17362 = ORIENTED_EDGE('',*,*,#17363,.F.); +#17363 = EDGE_CURVE('',#17241,#17352,#17364,.T.); +#17364 = LINE('',#17365,#17366); +#17365 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.151) + ); +#17366 = VECTOR('',#17367,1.); +#17367 = DIRECTION('',(-0.,-0.,-1.)); +#17368 = ORIENTED_EDGE('',*,*,#17240,.T.); +#17369 = ORIENTED_EDGE('',*,*,#17335,.T.); +#17370 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17371,#17372) + ,(#17373,#17374) + ,(#17375,#17376) + ,(#17377,#17378) + ,(#17379,#17380) + ,(#17381,#17382) + ,(#17383,#17384 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,4),(2,2),(0.,0.300541113159, + 0.567747146484,0.800033613737,1.),(0.,1.),.UNSPECIFIED.); +#17371 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.151) + ); +#17372 = CARTESIAN_POINT('',(-0.405916539634,-6.540340993875E-04,0.15)); +#17373 = CARTESIAN_POINT('',(-0.405625019016,-2.434257171443E-03,0.151) + ); +#17374 = CARTESIAN_POINT('',(-0.405625019016,-2.434257171443E-03,0.15)); +#17375 = CARTESIAN_POINT('',(-0.405074312335,-5.797246542985E-03,0.151) + ); +#17376 = CARTESIAN_POINT('',(-0.405074312335,-5.797246542985E-03,0.15)); +#17377 = CARTESIAN_POINT('',(-0.404144690283,-1.050949090729E-02,0.151) + ); +#17378 = CARTESIAN_POINT('',(-0.404144690283,-1.050949090729E-02,0.15)); +#17379 = CARTESIAN_POINT('',(-0.403109655135,-1.458194371313E-02,0.151) + ); +#17380 = CARTESIAN_POINT('',(-0.403109655135,-1.458194371313E-02,0.15)); +#17381 = CARTESIAN_POINT('',(-0.402292871226,-1.704505240258E-02,0.151) + ); +#17382 = CARTESIAN_POINT('',(-0.402292871226,-1.704505240258E-02,0.15)); +#17383 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.151) + ); +#17384 = CARTESIAN_POINT('',(-0.401915015244,-1.818452190427E-02,0.15)); +#17385 = ADVANCED_FACE('',(#17386),#17404,.T.); +#17386 = FACE_BOUND('',#17387,.T.); +#17387 = EDGE_LOOP('',(#17388,#17396,#17402,#17403)); +#17388 = ORIENTED_EDGE('',*,*,#17389,.F.); +#17389 = EDGE_CURVE('',#17390,#17352,#17392,.T.); +#17390 = VERTEX_POINT('',#17391); +#17391 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.15)); +#17392 = LINE('',#17393,#17394); +#17393 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.15)); +#17394 = VECTOR('',#17395,1.); +#17395 = DIRECTION('',(1.,0.,0.)); +#17396 = ORIENTED_EDGE('',*,*,#17397,.F.); +#17397 = EDGE_CURVE('',#17253,#17390,#17398,.T.); +#17398 = LINE('',#17399,#17400); +#17399 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17400 = VECTOR('',#17401,1.); +#17401 = DIRECTION('',(-0.,-0.,-1.)); +#17402 = ORIENTED_EDGE('',*,*,#17252,.T.); +#17403 = ORIENTED_EDGE('',*,*,#17363,.T.); +#17404 = PLANE('',#17405); +#17405 = AXIS2_PLACEMENT_3D('',#17406,#17407,#17408); +#17406 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17407 = DIRECTION('',(0.,1.,0.)); +#17408 = DIRECTION('',(0.,-0.,1.)); +#17409 = ADVANCED_FACE('',(#17410),#17432,.T.); +#17410 = FACE_BOUND('',#17411,.T.); +#17411 = EDGE_LOOP('',(#17412,#17424,#17430,#17431)); +#17412 = ORIENTED_EDGE('',*,*,#17413,.F.); +#17413 = EDGE_CURVE('',#17414,#17390,#17416,.T.); +#17414 = VERTEX_POINT('',#17415); +#17415 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.15)); +#17416 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17417,#17418,#17419,#17420, + #17421,#17422,#17423),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.174481715317,0.398285759128,0.673897847399,1.),.UNSPECIFIED.); +#17417 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.15)); +#17418 = CARTESIAN_POINT('',(-0.410273008475,-1.718706329099E-02,0.15)); +#17419 = CARTESIAN_POINT('',(-0.40956086675,-1.491018539426E-02,0.15)); +#17420 = CARTESIAN_POINT('',(-0.408627664757,-1.09804205008E-02,0.15)); +#17421 = CARTESIAN_POINT('',(-0.40771271877,-6.122007505996E-03,0.15)); +#17422 = CARTESIAN_POINT('',(-0.407073045952,-2.575877592136E-03,0.15)); +#17423 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.15)); +#17424 = ORIENTED_EDGE('',*,*,#17425,.F.); +#17425 = EDGE_CURVE('',#17261,#17414,#17426,.T.); +#17426 = LINE('',#17427,#17428); +#17427 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.151) + ); +#17428 = VECTOR('',#17429,1.); +#17429 = DIRECTION('',(-0.,-0.,-1.)); +#17430 = ORIENTED_EDGE('',*,*,#17260,.T.); +#17431 = ORIENTED_EDGE('',*,*,#17397,.T.); +#17432 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17433,#17434) + ,(#17435,#17436) + ,(#17437,#17438) + ,(#17439,#17440) + ,(#17441,#17442) + ,(#17443,#17444) + ,(#17445,#17446 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,4),(2,2),(0.,0.174481715317, + 0.398285759128,0.673897847399,1.),(0.,1.),.UNSPECIFIED.); +#17433 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.151) + ); +#17434 = CARTESIAN_POINT('',(-0.410584984756,-1.818452190427E-02,0.15)); +#17435 = CARTESIAN_POINT('',(-0.410273008475,-1.718706329099E-02,0.151) + ); +#17436 = CARTESIAN_POINT('',(-0.410273008475,-1.718706329099E-02,0.15)); +#17437 = CARTESIAN_POINT('',(-0.40956086675,-1.491018539426E-02,0.151)); +#17438 = CARTESIAN_POINT('',(-0.40956086675,-1.491018539426E-02,0.15)); +#17439 = CARTESIAN_POINT('',(-0.408627664757,-1.09804205008E-02,0.151)); +#17440 = CARTESIAN_POINT('',(-0.408627664757,-1.09804205008E-02,0.15)); +#17441 = CARTESIAN_POINT('',(-0.40771271877,-6.122007505996E-03,0.151)); +#17442 = CARTESIAN_POINT('',(-0.40771271877,-6.122007505996E-03,0.15)); +#17443 = CARTESIAN_POINT('',(-0.407073045952,-2.575877592136E-03,0.151) + ); +#17444 = CARTESIAN_POINT('',(-0.407073045952,-2.575877592136E-03,0.15)); +#17445 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.151) + ); +#17446 = CARTESIAN_POINT('',(-0.406726371951,-6.540340993875E-04,0.15)); +#17447 = ADVANCED_FACE('',(#17448),#17459,.T.); +#17448 = FACE_BOUND('',#17449,.T.); +#17449 = EDGE_LOOP('',(#17450,#17456,#17457,#17458)); +#17450 = ORIENTED_EDGE('',*,*,#17451,.F.); +#17451 = EDGE_CURVE('',#17299,#17414,#17452,.T.); +#17452 = LINE('',#17453,#17454); +#17453 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.15)); +#17454 = VECTOR('',#17455,1.); +#17455 = DIRECTION('',(0.339053795485,0.940766986967,0.)); +#17456 = ORIENTED_EDGE('',*,*,#17313,.F.); +#17457 = ORIENTED_EDGE('',*,*,#17272,.T.); +#17458 = ORIENTED_EDGE('',*,*,#17425,.T.); +#17459 = PLANE('',#17460); +#17460 = AXIS2_PLACEMENT_3D('',#17461,#17462,#17463); +#17461 = CARTESIAN_POINT('',(-0.448218368902,-0.122605253612,0.151)); +#17462 = DIRECTION('',(-0.940766986967,0.339053795485,0.)); +#17463 = DIRECTION('',(-0.339053795485,-0.940766986967,0.)); +#17464 = ADVANCED_FACE('',(#17465),#17490,.T.); +#17465 = FACE_BOUND('',#17466,.T.); +#17466 = EDGE_LOOP('',(#17467,#17468,#17476,#17484)); +#17467 = ORIENTED_EDGE('',*,*,#14145,.F.); +#17468 = ORIENTED_EDGE('',*,*,#17469,.F.); +#17469 = EDGE_CURVE('',#17470,#14146,#17472,.T.); +#17470 = VERTEX_POINT('',#17471); +#17471 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17472 = LINE('',#17473,#17474); +#17473 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17474 = VECTOR('',#17475,1.); +#17475 = DIRECTION('',(-0.,-0.,-1.)); +#17476 = ORIENTED_EDGE('',*,*,#17477,.T.); +#17477 = EDGE_CURVE('',#17470,#17478,#17480,.T.); +#17478 = VERTEX_POINT('',#17479); +#17479 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.151) + ); +#17480 = LINE('',#17481,#17482); +#17481 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17482 = VECTOR('',#17483,1.); +#17483 = DIRECTION('',(1.,0.,0.)); +#17484 = ORIENTED_EDGE('',*,*,#17485,.T.); +#17485 = EDGE_CURVE('',#17478,#14148,#17486,.T.); +#17486 = LINE('',#17487,#17488); +#17487 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.151) + ); +#17488 = VECTOR('',#17489,1.); +#17489 = DIRECTION('',(-0.,-0.,-1.)); +#17490 = PLANE('',#17491); +#17491 = AXIS2_PLACEMENT_3D('',#17492,#17493,#17494); +#17492 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17493 = DIRECTION('',(0.,1.,0.)); +#17494 = DIRECTION('',(0.,-0.,1.)); +#17495 = ADVANCED_FACE('',(#17496),#17514,.T.); +#17496 = FACE_BOUND('',#17497,.T.); +#17497 = EDGE_LOOP('',(#17498,#17499,#17500,#17508)); +#17498 = ORIENTED_EDGE('',*,*,#14155,.F.); +#17499 = ORIENTED_EDGE('',*,*,#17485,.F.); +#17500 = ORIENTED_EDGE('',*,*,#17501,.T.); +#17501 = EDGE_CURVE('',#17478,#17502,#17504,.T.); +#17502 = VERTEX_POINT('',#17503); +#17503 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02, + 0.151)); +#17504 = LINE('',#17505,#17506); +#17505 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.151) + ); +#17506 = VECTOR('',#17507,1.); +#17507 = DIRECTION('',(0.,1.,0.)); +#17508 = ORIENTED_EDGE('',*,*,#17509,.T.); +#17509 = EDGE_CURVE('',#17502,#14156,#17510,.T.); +#17510 = LINE('',#17511,#17512); +#17511 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02, + 0.151)); +#17512 = VECTOR('',#17513,1.); +#17513 = DIRECTION('',(-0.,-0.,-1.)); +#17514 = PLANE('',#17515); +#17515 = AXIS2_PLACEMENT_3D('',#17516,#17517,#17518); +#17516 = CARTESIAN_POINT('',(-7.621951219512E-02,-0.220166229221,0.151) + ); +#17517 = DIRECTION('',(-1.,0.,0.)); +#17518 = DIRECTION('',(0.,0.,1.)); +#17519 = ADVANCED_FACE('',(#17520),#17538,.T.); +#17520 = FACE_BOUND('',#17521,.T.); +#17521 = EDGE_LOOP('',(#17522,#17523,#17524,#17532)); +#17522 = ORIENTED_EDGE('',*,*,#14163,.F.); +#17523 = ORIENTED_EDGE('',*,*,#17509,.F.); +#17524 = ORIENTED_EDGE('',*,*,#17525,.T.); +#17525 = EDGE_CURVE('',#17502,#17526,#17528,.T.); +#17526 = VERTEX_POINT('',#17527); +#17527 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.151)); +#17528 = LINE('',#17529,#17530); +#17529 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02, + 0.151)); +#17530 = VECTOR('',#17531,1.); +#17531 = DIRECTION('',(-1.,0.,0.)); +#17532 = ORIENTED_EDGE('',*,*,#17533,.T.); +#17533 = EDGE_CURVE('',#17526,#14164,#17534,.T.); +#17534 = LINE('',#17535,#17536); +#17535 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.151)); +#17536 = VECTOR('',#17537,1.); +#17537 = DIRECTION('',(-0.,-0.,-1.)); +#17538 = PLANE('',#17539); +#17539 = AXIS2_PLACEMENT_3D('',#17540,#17541,#17542); +#17540 = CARTESIAN_POINT('',(-7.621951219512E-02,2.983377077866E-02, + 0.151)); +#17541 = DIRECTION('',(0.,-1.,0.)); +#17542 = DIRECTION('',(0.,-0.,-1.)); +#17543 = ADVANCED_FACE('',(#17544),#17578,.T.); +#17544 = FACE_BOUND('',#17545,.T.); +#17545 = EDGE_LOOP('',(#17546,#17547,#17548,#17572)); +#17546 = ORIENTED_EDGE('',*,*,#14171,.F.); +#17547 = ORIENTED_EDGE('',*,*,#17533,.F.); +#17548 = ORIENTED_EDGE('',*,*,#17549,.T.); +#17549 = EDGE_CURVE('',#17526,#17550,#17552,.T.); +#17550 = VERTEX_POINT('',#17551); +#17551 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17552 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17553,#17554,#17555,#17556, + #17557,#17558,#17559,#17560,#17561,#17562,#17563,#17564,#17565, + #17566,#17567,#17568,#17569,#17570,#17571),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.86311786766E-02, + 0.134566466039,0.198328154011,0.260789766641,0.321999151484, + 0.382721746503,0.443537474036,0.505133429485,0.566213874765, + 0.626105864618,0.685349322161,0.744995870348,0.805415841815, + 0.867636266346,0.932307782302,1.),.UNSPECIFIED.); +#17553 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.151)); +#17554 = CARTESIAN_POINT('',(-0.151363164187,2.973139779052E-02,0.151)); +#17555 = CARTESIAN_POINT('',(-0.160368680593,2.953067311263E-02,0.151)); +#17556 = CARTESIAN_POINT('',(-0.173574716639,2.80059343019E-02,0.151)); +#17557 = CARTESIAN_POINT('',(-0.186173677392,2.536001684969E-02,0.151)); +#17558 = CARTESIAN_POINT('',(-0.198200209149,2.175039216729E-02,0.151)); +#17559 = CARTESIAN_POINT('',(-0.209668242661,1.7139136031E-02,0.151)); +#17560 = CARTESIAN_POINT('',(-0.220469739613,1.136246309969E-02,0.151)); +#17561 = CARTESIAN_POINT('',(-0.230723215626,4.621140949963E-03,0.151)); +#17562 = CARTESIAN_POINT('',(-0.240295243743,-3.099451121006E-03,0.151) + ); +#17563 = CARTESIAN_POINT('',(-0.249019812633,-1.168398974297E-02,0.151) + ); +#17564 = CARTESIAN_POINT('',(-0.25662534286,-2.107265815872E-02,0.151)); +#17565 = CARTESIAN_POINT('',(-0.263136857945,-3.113988430946E-02,0.151) + ); +#17566 = CARTESIAN_POINT('',(-0.268376914018,-4.196526877278E-02,0.151) + ); +#17567 = CARTESIAN_POINT('',(-0.27244566113,-5.349048437803E-02,0.151)); +#17568 = CARTESIAN_POINT('',(-0.275326864668,-6.570717386482E-02,0.151) + ); +#17569 = CARTESIAN_POINT('',(-0.277144101593,-7.862917413655E-02,0.151) + ); +#17570 = CARTESIAN_POINT('',(-0.277339232417,-8.749043270054E-02,0.151) + ); +#17571 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17572 = ORIENTED_EDGE('',*,*,#17573,.T.); +#17573 = EDGE_CURVE('',#17550,#14172,#17574,.T.); +#17574 = LINE('',#17575,#17576); +#17575 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17576 = VECTOR('',#17577,1.); +#17577 = DIRECTION('',(-0.,-0.,-1.)); +#17578 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17579,#17580) + ,(#17581,#17582) + ,(#17583,#17584) + ,(#17585,#17586) + ,(#17587,#17588) + ,(#17589,#17590) + ,(#17591,#17592) + ,(#17593,#17594) + ,(#17595,#17596) + ,(#17597,#17598) + ,(#17599,#17600) + ,(#17601,#17602) + ,(#17603,#17604) + ,(#17605,#17606) + ,(#17607,#17608) + ,(#17609,#17610) + ,(#17611,#17612) + ,(#17613,#17614) + ,(#17615,#17616 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.86311786766E-02,0.134566466039,0.198328154011, + 0.260789766641,0.321999151484,0.382721746503,0.443537474036, + 0.505133429485,0.566213874765,0.626105864618,0.685349322161, + 0.744995870348,0.805415841815,0.867636266346,0.932307782302,1.),(0., + 1.),.UNSPECIFIED.); +#17579 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.151)); +#17580 = CARTESIAN_POINT('',(-0.146770198171,2.983377077866E-02,0.15)); +#17581 = CARTESIAN_POINT('',(-0.151363164187,2.973139779052E-02,0.151)); +#17582 = CARTESIAN_POINT('',(-0.151363164187,2.973139779052E-02,0.15)); +#17583 = CARTESIAN_POINT('',(-0.160368680593,2.953067311263E-02,0.151)); +#17584 = CARTESIAN_POINT('',(-0.160368680593,2.953067311263E-02,0.15)); +#17585 = CARTESIAN_POINT('',(-0.173574716639,2.80059343019E-02,0.151)); +#17586 = CARTESIAN_POINT('',(-0.173574716639,2.80059343019E-02,0.15)); +#17587 = CARTESIAN_POINT('',(-0.186173677392,2.536001684969E-02,0.151)); +#17588 = CARTESIAN_POINT('',(-0.186173677392,2.536001684969E-02,0.15)); +#17589 = CARTESIAN_POINT('',(-0.198200209149,2.175039216729E-02,0.151)); +#17590 = CARTESIAN_POINT('',(-0.198200209149,2.175039216729E-02,0.15)); +#17591 = CARTESIAN_POINT('',(-0.209668242661,1.7139136031E-02,0.151)); +#17592 = CARTESIAN_POINT('',(-0.209668242661,1.7139136031E-02,0.15)); +#17593 = CARTESIAN_POINT('',(-0.220469739613,1.136246309969E-02,0.151)); +#17594 = CARTESIAN_POINT('',(-0.220469739613,1.136246309969E-02,0.15)); +#17595 = CARTESIAN_POINT('',(-0.230723215626,4.621140949963E-03,0.151)); +#17596 = CARTESIAN_POINT('',(-0.230723215626,4.621140949963E-03,0.15)); +#17597 = CARTESIAN_POINT('',(-0.240295243743,-3.099451121006E-03,0.151) + ); +#17598 = CARTESIAN_POINT('',(-0.240295243743,-3.099451121006E-03,0.15)); +#17599 = CARTESIAN_POINT('',(-0.249019812633,-1.168398974297E-02,0.151) + ); +#17600 = CARTESIAN_POINT('',(-0.249019812633,-1.168398974297E-02,0.15)); +#17601 = CARTESIAN_POINT('',(-0.25662534286,-2.107265815872E-02,0.151)); +#17602 = CARTESIAN_POINT('',(-0.25662534286,-2.107265815872E-02,0.15)); +#17603 = CARTESIAN_POINT('',(-0.263136857945,-3.113988430946E-02,0.151) + ); +#17604 = CARTESIAN_POINT('',(-0.263136857945,-3.113988430946E-02,0.15)); +#17605 = CARTESIAN_POINT('',(-0.268376914018,-4.196526877278E-02,0.151) + ); +#17606 = CARTESIAN_POINT('',(-0.268376914018,-4.196526877278E-02,0.15)); +#17607 = CARTESIAN_POINT('',(-0.27244566113,-5.349048437803E-02,0.151)); +#17608 = CARTESIAN_POINT('',(-0.27244566113,-5.349048437803E-02,0.15)); +#17609 = CARTESIAN_POINT('',(-0.275326864668,-6.570717386482E-02,0.151) + ); +#17610 = CARTESIAN_POINT('',(-0.275326864668,-6.570717386482E-02,0.15)); +#17611 = CARTESIAN_POINT('',(-0.277144101593,-7.862917413655E-02,0.151) + ); +#17612 = CARTESIAN_POINT('',(-0.277144101593,-7.862917413655E-02,0.15)); +#17613 = CARTESIAN_POINT('',(-0.277339232417,-8.749043270054E-02,0.151) + ); +#17614 = CARTESIAN_POINT('',(-0.277339232417,-8.749043270054E-02,0.15)); +#17615 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17616 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.15)); +#17617 = ADVANCED_FACE('',(#17618),#17645,.T.); +#17618 = FACE_BOUND('',#17619,.T.); +#17619 = EDGE_LOOP('',(#17620,#17621,#17622,#17644)); +#17620 = ORIENTED_EDGE('',*,*,#14195,.F.); +#17621 = ORIENTED_EDGE('',*,*,#17573,.F.); +#17622 = ORIENTED_EDGE('',*,*,#17623,.T.); +#17623 = EDGE_CURVE('',#17550,#17470,#17624,.T.); +#17624 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17625,#17626,#17627,#17628, + #17629,#17630,#17631,#17632,#17633,#17634,#17635,#17636,#17637, + #17638,#17639,#17640,#17641,#17642,#17643),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.806869584499E-02, + 0.133427432819,0.196146033813,0.257048592449,0.316882663159, + 0.376187208666,0.435960335364,0.496535236863,0.557465343481, + 0.61768686341,0.677943640697,0.738805284806,0.800949336767, + 0.86481466747,0.931024781079,1.),.UNSPECIFIED.); +#17625 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17626 = CARTESIAN_POINT('',(-0.27733805759,-9.674407046988E-02,0.151)); +#17627 = CARTESIAN_POINT('',(-0.27714014369,-0.105999874043,0.151)); +#17628 = CARTESIAN_POINT('',(-0.275331199032,-0.119507922813,0.151)); +#17629 = CARTESIAN_POINT('',(-0.272443525011,-0.132307181048,0.151)); +#17630 = CARTESIAN_POINT('',(-0.268390084546,-0.144390377258,0.151)); +#17631 = CARTESIAN_POINT('',(-0.263142063019,-0.155748796095,0.151)); +#17632 = CARTESIAN_POINT('',(-0.256635298103,-0.166340940351,0.151)); +#17633 = CARTESIAN_POINT('',(-0.249045160493,-0.176247571625,0.151)); +#17634 = CARTESIAN_POINT('',(-0.240319648101,-0.185332960942,0.151)); +#17635 = CARTESIAN_POINT('',(-0.230669860209,-0.19346435198,0.151)); +#17636 = CARTESIAN_POINT('',(-0.220351151139,-0.200696055045,0.151)); +#17637 = CARTESIAN_POINT('',(-0.209274856824,-0.20670463646,0.151)); +#17638 = CARTESIAN_POINT('',(-0.197535579708,-0.211613933363,0.151)); +#17639 = CARTESIAN_POINT('',(-0.185153851815,-0.215511621629,0.151)); +#17640 = CARTESIAN_POINT('',(-0.172076012382,-0.218165366243,0.151)); +#17641 = CARTESIAN_POINT('',(-0.158361497248,-0.219909970895,0.151)); +#17642 = CARTESIAN_POINT('',(-0.148982968879,-0.220079652877,0.151)); +#17643 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17644 = ORIENTED_EDGE('',*,*,#17469,.T.); +#17645 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17646,#17647) + ,(#17648,#17649) + ,(#17650,#17651) + ,(#17652,#17653) + ,(#17654,#17655) + ,(#17656,#17657) + ,(#17658,#17659) + ,(#17660,#17661) + ,(#17662,#17663) + ,(#17664,#17665) + ,(#17666,#17667) + ,(#17668,#17669) + ,(#17670,#17671) + ,(#17672,#17673) + ,(#17674,#17675) + ,(#17676,#17677) + ,(#17678,#17679) + ,(#17680,#17681) + ,(#17682,#17683 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.806869584499E-02,0.133427432819,0.196146033813, + 0.257048592449,0.316882663159,0.376187208666,0.435960335364, + 0.496535236863,0.557465343481,0.61768686341,0.677943640697, + 0.738805284806,0.800949336767,0.86481466747,0.931024781079,1.),(0., + 1.),.UNSPECIFIED.); +#17646 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.151)); +#17647 = CARTESIAN_POINT('',(-0.27743902439,-9.202217434329E-02,0.15)); +#17648 = CARTESIAN_POINT('',(-0.27733805759,-9.674407046988E-02,0.151)); +#17649 = CARTESIAN_POINT('',(-0.27733805759,-9.674407046988E-02,0.15)); +#17650 = CARTESIAN_POINT('',(-0.27714014369,-0.105999874043,0.151)); +#17651 = CARTESIAN_POINT('',(-0.27714014369,-0.105999874043,0.15)); +#17652 = CARTESIAN_POINT('',(-0.275331199032,-0.119507922813,0.151)); +#17653 = CARTESIAN_POINT('',(-0.275331199032,-0.119507922813,0.15)); +#17654 = CARTESIAN_POINT('',(-0.272443525011,-0.132307181048,0.151)); +#17655 = CARTESIAN_POINT('',(-0.272443525011,-0.132307181048,0.15)); +#17656 = CARTESIAN_POINT('',(-0.268390084546,-0.144390377258,0.151)); +#17657 = CARTESIAN_POINT('',(-0.268390084546,-0.144390377258,0.15)); +#17658 = CARTESIAN_POINT('',(-0.263142063019,-0.155748796095,0.151)); +#17659 = CARTESIAN_POINT('',(-0.263142063019,-0.155748796095,0.15)); +#17660 = CARTESIAN_POINT('',(-0.256635298103,-0.166340940351,0.151)); +#17661 = CARTESIAN_POINT('',(-0.256635298103,-0.166340940351,0.15)); +#17662 = CARTESIAN_POINT('',(-0.249045160493,-0.176247571625,0.151)); +#17663 = CARTESIAN_POINT('',(-0.249045160493,-0.176247571625,0.15)); +#17664 = CARTESIAN_POINT('',(-0.240319648101,-0.185332960942,0.151)); +#17665 = CARTESIAN_POINT('',(-0.240319648101,-0.185332960942,0.15)); +#17666 = CARTESIAN_POINT('',(-0.230669860209,-0.19346435198,0.151)); +#17667 = CARTESIAN_POINT('',(-0.230669860209,-0.19346435198,0.15)); +#17668 = CARTESIAN_POINT('',(-0.220351151139,-0.200696055045,0.151)); +#17669 = CARTESIAN_POINT('',(-0.220351151139,-0.200696055045,0.15)); +#17670 = CARTESIAN_POINT('',(-0.209274856824,-0.20670463646,0.151)); +#17671 = CARTESIAN_POINT('',(-0.209274856824,-0.20670463646,0.15)); +#17672 = CARTESIAN_POINT('',(-0.197535579708,-0.211613933363,0.151)); +#17673 = CARTESIAN_POINT('',(-0.197535579708,-0.211613933363,0.15)); +#17674 = CARTESIAN_POINT('',(-0.185153851815,-0.215511621629,0.151)); +#17675 = CARTESIAN_POINT('',(-0.185153851815,-0.215511621629,0.15)); +#17676 = CARTESIAN_POINT('',(-0.172076012382,-0.218165366243,0.151)); +#17677 = CARTESIAN_POINT('',(-0.172076012382,-0.218165366243,0.15)); +#17678 = CARTESIAN_POINT('',(-0.158361497248,-0.219909970895,0.151)); +#17679 = CARTESIAN_POINT('',(-0.158361497248,-0.219909970895,0.15)); +#17680 = CARTESIAN_POINT('',(-0.148982968879,-0.220079652877,0.151)); +#17681 = CARTESIAN_POINT('',(-0.148982968879,-0.220079652877,0.15)); +#17682 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.151)); +#17683 = CARTESIAN_POINT('',(-0.144197789634,-0.220166229221,0.15)); +#17684 = ADVANCED_FACE('',(#17685,#17759),#17766,.T.); +#17685 = FACE_BOUND('',#17686,.T.); +#17686 = EDGE_LOOP('',(#17687,#17713,#17737,#17745,#17753)); +#17687 = ORIENTED_EDGE('',*,*,#17688,.F.); +#17688 = EDGE_CURVE('',#17689,#17691,#17693,.T.); +#17689 = VERTEX_POINT('',#17690); +#17690 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17691 = VERTEX_POINT('',#17692); +#17692 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17693 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17694,#17695,#17696,#17697, + #17698,#17699,#17700,#17701,#17702,#17703,#17704,#17705,#17706, + #17707,#17708,#17709,#17710,#17711,#17712),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.430379644282E-02, + 0.144393610364,0.210499496103,0.273542606503,0.333824744579, + 0.392529672409,0.4500874546,0.507820611556,0.565464912777, + 0.623148722334,0.681297192791,0.740913498157,0.801855752196, + 0.865241237721,0.930941657047,1.),.UNSPECIFIED.); +#17694 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17695 = CARTESIAN_POINT('',(-0.243820493879,-8.890651098574E-02,0.151) + ); +#17696 = CARTESIAN_POINT('',(-0.243661250933,-8.14632913089E-02,0.151)); +#17697 = CARTESIAN_POINT('',(-0.242422197383,-7.06680393421E-02,0.151)); +#17698 = CARTESIAN_POINT('',(-0.240345701121,-6.059629555815E-02,0.151) + ); +#17699 = CARTESIAN_POINT('',(-0.237393498453,-5.12716088559E-02,0.151)); +#17700 = CARTESIAN_POINT('',(-0.233625365863,-4.265802386901E-02,0.151) + ); +#17701 = CARTESIAN_POINT('',(-0.228985407988,-3.480489176174E-02,0.151) + ); +#17702 = CARTESIAN_POINT('',(-0.223509591224,-2.767371257045E-02,0.151) + ); +#17703 = CARTESIAN_POINT('',(-0.217198704118,-2.134631947101E-02,0.151) + ); +#17704 = CARTESIAN_POINT('',(-0.210207697907,-1.578362777346E-02,0.151) + ); +#17705 = CARTESIAN_POINT('',(-0.202708449294,-1.08881852356E-02,0.151)); +#17706 = CARTESIAN_POINT('',(-0.194635904412,-6.777775147896E-03,0.151) + ); +#17707 = CARTESIAN_POINT('',(-0.186053296442,-3.40004363896E-03,0.151)); +#17708 = CARTESIAN_POINT('',(-0.176931578247,-7.64405247335E-04,0.151)); +#17709 = CARTESIAN_POINT('',(-0.167298734722,1.064994986937E-03,0.151)); +#17710 = CARTESIAN_POINT('',(-0.157133649513,2.178562431342E-03,0.151)); +#17711 = CARTESIAN_POINT('',(-0.150187105637,2.321497846144E-03,0.151)); +#17712 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17713 = ORIENTED_EDGE('',*,*,#17714,.F.); +#17714 = EDGE_CURVE('',#17715,#17689,#17717,.T.); +#17715 = VERTEX_POINT('',#17716); +#17716 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.151)); +#17717 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17718,#17719,#17720,#17721, + #17722,#17723,#17724,#17725,#17726,#17727,#17728,#17729,#17730, + #17731,#17732,#17733,#17734,#17735,#17736),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.082657255516E-02, + 0.13816903328,0.202475331534,0.263973754414,0.323380320598, + 0.381797622713,0.439390074519,0.496902724546,0.554662169609, + 0.612741878492,0.671538836391,0.73165572209,0.794297811614, + 0.859482204979,0.927681325453,1.),.UNSPECIFIED.); +#17718 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.151)); +#17719 = CARTESIAN_POINT('',(-0.14901270012,-0.192645777602,0.151)); +#17720 = CARTESIAN_POINT('',(-0.156361182956,-0.192486928724,0.151)); +#17721 = CARTESIAN_POINT('',(-0.167070322092,-0.191225478321,0.151)); +#17722 = CARTESIAN_POINT('',(-0.177149538377,-0.189199829692,0.151)); +#17723 = CARTESIAN_POINT('',(-0.186600166535,-0.186362205986,0.151)); +#17724 = CARTESIAN_POINT('',(-0.19538126328,-0.182600800808,0.151)); +#17725 = CARTESIAN_POINT('',(-0.203563666512,-0.178086901189,0.151)); +#17726 = CARTESIAN_POINT('',(-0.211091174492,-0.172715446386,0.151)); +#17727 = CARTESIAN_POINT('',(-0.217933273205,-0.166546681208,0.151)); +#17728 = CARTESIAN_POINT('',(-0.224031959178,-0.159611323529,0.151)); +#17729 = CARTESIAN_POINT('',(-0.229412550644,-0.152017862689,0.151)); +#17730 = CARTESIAN_POINT('',(-0.233882928184,-0.143713038816,0.151)); +#17731 = CARTESIAN_POINT('',(-0.237584800738,-0.13477921648,0.151)); +#17732 = CARTESIAN_POINT('',(-0.240413555445,-0.125177026454,0.151)); +#17733 = CARTESIAN_POINT('',(-0.242464124784,-0.114944935649,0.151)); +#17734 = CARTESIAN_POINT('',(-0.243648516798,-0.104054575992,0.151)); +#17735 = CARTESIAN_POINT('',(-0.243816160019,-9.658236764612E-02,0.151) + ); +#17736 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17737 = ORIENTED_EDGE('',*,*,#17738,.F.); +#17738 = EDGE_CURVE('',#17739,#17715,#17741,.T.); +#17739 = VERTEX_POINT('',#17740); +#17740 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.151)); +#17741 = LINE('',#17742,#17743); +#17742 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.151)); +#17743 = VECTOR('',#17744,1.); +#17744 = DIRECTION('',(-1.,0.,0.)); +#17745 = ORIENTED_EDGE('',*,*,#17746,.F.); +#17746 = EDGE_CURVE('',#17747,#17739,#17749,.T.); +#17747 = VERTEX_POINT('',#17748); +#17748 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.151)); +#17749 = LINE('',#17750,#17751); +#17750 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.151)); +#17751 = VECTOR('',#17752,1.); +#17752 = DIRECTION('',(0.,-1.,0.)); +#17753 = ORIENTED_EDGE('',*,*,#17754,.F.); +#17754 = EDGE_CURVE('',#17691,#17747,#17755,.T.); +#17755 = LINE('',#17756,#17757); +#17756 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17757 = VECTOR('',#17758,1.); +#17758 = DIRECTION('',(1.,0.,0.)); +#17759 = FACE_BOUND('',#17760,.T.); +#17760 = EDGE_LOOP('',(#17761,#17762,#17763,#17764,#17765)); +#17761 = ORIENTED_EDGE('',*,*,#17477,.F.); +#17762 = ORIENTED_EDGE('',*,*,#17623,.F.); +#17763 = ORIENTED_EDGE('',*,*,#17549,.F.); +#17764 = ORIENTED_EDGE('',*,*,#17525,.F.); +#17765 = ORIENTED_EDGE('',*,*,#17501,.F.); +#17766 = PLANE('',#17767); +#17767 = AXIS2_PLACEMENT_3D('',#17768,#17769,#17770); +#17768 = CARTESIAN_POINT('',(-0.239414409096,-2.591054114E-03,0.151)); +#17769 = DIRECTION('',(9.258044371303E-15,-1.50594694407E-13,-1.)); +#17770 = DIRECTION('',(4.117707846662E-44,1.,-1.50594694407E-13)); +#17771 = ADVANCED_FACE('',(#17772),#17797,.T.); +#17772 = FACE_BOUND('',#17773,.T.); +#17773 = EDGE_LOOP('',(#17774,#17784,#17790,#17791)); +#17774 = ORIENTED_EDGE('',*,*,#17775,.F.); +#17775 = EDGE_CURVE('',#17776,#17778,#17780,.T.); +#17776 = VERTEX_POINT('',#17777); +#17777 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.15)); +#17778 = VERTEX_POINT('',#17779); +#17779 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.15)); +#17780 = LINE('',#17781,#17782); +#17781 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.15)); +#17782 = VECTOR('',#17783,1.); +#17783 = DIRECTION('',(1.,0.,0.)); +#17784 = ORIENTED_EDGE('',*,*,#17785,.F.); +#17785 = EDGE_CURVE('',#17691,#17776,#17786,.T.); +#17786 = LINE('',#17787,#17788); +#17787 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17788 = VECTOR('',#17789,1.); +#17789 = DIRECTION('',(-0.,-0.,-1.)); +#17790 = ORIENTED_EDGE('',*,*,#17754,.T.); +#17791 = ORIENTED_EDGE('',*,*,#17792,.T.); +#17792 = EDGE_CURVE('',#17747,#17778,#17793,.T.); +#17793 = LINE('',#17794,#17795); +#17794 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.151)); +#17795 = VECTOR('',#17796,1.); +#17796 = DIRECTION('',(-0.,-0.,-1.)); +#17797 = PLANE('',#17798); +#17798 = AXIS2_PLACEMENT_3D('',#17799,#17800,#17801); +#17799 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17800 = DIRECTION('',(0.,1.,0.)); +#17801 = DIRECTION('',(0.,-0.,1.)); +#17802 = ADVANCED_FACE('',(#17803),#17837,.T.); +#17803 = FACE_BOUND('',#17804,.T.); +#17804 = EDGE_LOOP('',(#17805,#17829,#17835,#17836)); +#17805 = ORIENTED_EDGE('',*,*,#17806,.F.); +#17806 = EDGE_CURVE('',#17807,#17776,#17809,.T.); +#17807 = VERTEX_POINT('',#17808); +#17808 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.15)); +#17809 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17810,#17811,#17812,#17813, + #17814,#17815,#17816,#17817,#17818,#17819,#17820,#17821,#17822, + #17823,#17824,#17825,#17826,#17827,#17828),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.430379644282E-02, + 0.144393610364,0.210499496103,0.273542606503,0.333824744579, + 0.392529672409,0.4500874546,0.507820611556,0.565464912777, + 0.623148722334,0.681297192791,0.740913498157,0.801855752196, + 0.865241237721,0.930941657047,1.),.UNSPECIFIED.); +#17810 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.15)); +#17811 = CARTESIAN_POINT('',(-0.243820493879,-8.890651098574E-02,0.15)); +#17812 = CARTESIAN_POINT('',(-0.243661250933,-8.14632913089E-02,0.15)); +#17813 = CARTESIAN_POINT('',(-0.242422197383,-7.06680393421E-02,0.15)); +#17814 = CARTESIAN_POINT('',(-0.240345701121,-6.059629555815E-02,0.15)); +#17815 = CARTESIAN_POINT('',(-0.237393498453,-5.12716088559E-02,0.15)); +#17816 = CARTESIAN_POINT('',(-0.233625365863,-4.265802386901E-02,0.15)); +#17817 = CARTESIAN_POINT('',(-0.228985407988,-3.480489176174E-02,0.15)); +#17818 = CARTESIAN_POINT('',(-0.223509591224,-2.767371257045E-02,0.15)); +#17819 = CARTESIAN_POINT('',(-0.217198704118,-2.134631947101E-02,0.15)); +#17820 = CARTESIAN_POINT('',(-0.210207697907,-1.578362777346E-02,0.15)); +#17821 = CARTESIAN_POINT('',(-0.202708449294,-1.08881852356E-02,0.15)); +#17822 = CARTESIAN_POINT('',(-0.194635904412,-6.777775147896E-03,0.15)); +#17823 = CARTESIAN_POINT('',(-0.186053296442,-3.40004363896E-03,0.15)); +#17824 = CARTESIAN_POINT('',(-0.176931578247,-7.64405247335E-04,0.15)); +#17825 = CARTESIAN_POINT('',(-0.167298734722,1.064994986937E-03,0.15)); +#17826 = CARTESIAN_POINT('',(-0.157133649513,2.178562431342E-03,0.15)); +#17827 = CARTESIAN_POINT('',(-0.150187105637,2.321497846144E-03,0.15)); +#17828 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.15)); +#17829 = ORIENTED_EDGE('',*,*,#17830,.F.); +#17830 = EDGE_CURVE('',#17689,#17807,#17831,.T.); +#17831 = LINE('',#17832,#17833); +#17832 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17833 = VECTOR('',#17834,1.); +#17834 = DIRECTION('',(-0.,-0.,-1.)); +#17835 = ORIENTED_EDGE('',*,*,#17688,.T.); +#17836 = ORIENTED_EDGE('',*,*,#17785,.T.); +#17837 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17838,#17839) + ,(#17840,#17841) + ,(#17842,#17843) + ,(#17844,#17845) + ,(#17846,#17847) + ,(#17848,#17849) + ,(#17850,#17851) + ,(#17852,#17853) + ,(#17854,#17855) + ,(#17856,#17857) + ,(#17858,#17859) + ,(#17860,#17861) + ,(#17862,#17863) + ,(#17864,#17865) + ,(#17866,#17867) + ,(#17868,#17869) + ,(#17870,#17871) + ,(#17872,#17873) + ,(#17874,#17875 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.430379644282E-02,0.144393610364,0.210499496103, + 0.273542606503,0.333824744579,0.392529672409,0.4500874546, + 0.507820611556,0.565464912777,0.623148722334,0.681297192791, + 0.740913498157,0.801855752196,0.865241237721,0.930941657047,1.),(0., + 1.),.UNSPECIFIED.); +#17838 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17839 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.15)); +#17840 = CARTESIAN_POINT('',(-0.243820493879,-8.890651098574E-02,0.151) + ); +#17841 = CARTESIAN_POINT('',(-0.243820493879,-8.890651098574E-02,0.15)); +#17842 = CARTESIAN_POINT('',(-0.243661250933,-8.14632913089E-02,0.151)); +#17843 = CARTESIAN_POINT('',(-0.243661250933,-8.14632913089E-02,0.15)); +#17844 = CARTESIAN_POINT('',(-0.242422197383,-7.06680393421E-02,0.151)); +#17845 = CARTESIAN_POINT('',(-0.242422197383,-7.06680393421E-02,0.15)); +#17846 = CARTESIAN_POINT('',(-0.240345701121,-6.059629555815E-02,0.151) + ); +#17847 = CARTESIAN_POINT('',(-0.240345701121,-6.059629555815E-02,0.15)); +#17848 = CARTESIAN_POINT('',(-0.237393498453,-5.12716088559E-02,0.151)); +#17849 = CARTESIAN_POINT('',(-0.237393498453,-5.12716088559E-02,0.15)); +#17850 = CARTESIAN_POINT('',(-0.233625365863,-4.265802386901E-02,0.151) + ); +#17851 = CARTESIAN_POINT('',(-0.233625365863,-4.265802386901E-02,0.15)); +#17852 = CARTESIAN_POINT('',(-0.228985407988,-3.480489176174E-02,0.151) + ); +#17853 = CARTESIAN_POINT('',(-0.228985407988,-3.480489176174E-02,0.15)); +#17854 = CARTESIAN_POINT('',(-0.223509591224,-2.767371257045E-02,0.151) + ); +#17855 = CARTESIAN_POINT('',(-0.223509591224,-2.767371257045E-02,0.15)); +#17856 = CARTESIAN_POINT('',(-0.217198704118,-2.134631947101E-02,0.151) + ); +#17857 = CARTESIAN_POINT('',(-0.217198704118,-2.134631947101E-02,0.15)); +#17858 = CARTESIAN_POINT('',(-0.210207697907,-1.578362777346E-02,0.151) + ); +#17859 = CARTESIAN_POINT('',(-0.210207697907,-1.578362777346E-02,0.15)); +#17860 = CARTESIAN_POINT('',(-0.202708449294,-1.08881852356E-02,0.151)); +#17861 = CARTESIAN_POINT('',(-0.202708449294,-1.08881852356E-02,0.15)); +#17862 = CARTESIAN_POINT('',(-0.194635904412,-6.777775147896E-03,0.151) + ); +#17863 = CARTESIAN_POINT('',(-0.194635904412,-6.777775147896E-03,0.15)); +#17864 = CARTESIAN_POINT('',(-0.186053296442,-3.40004363896E-03,0.151)); +#17865 = CARTESIAN_POINT('',(-0.186053296442,-3.40004363896E-03,0.15)); +#17866 = CARTESIAN_POINT('',(-0.176931578247,-7.64405247335E-04,0.151)); +#17867 = CARTESIAN_POINT('',(-0.176931578247,-7.64405247335E-04,0.15)); +#17868 = CARTESIAN_POINT('',(-0.167298734722,1.064994986937E-03,0.151)); +#17869 = CARTESIAN_POINT('',(-0.167298734722,1.064994986937E-03,0.15)); +#17870 = CARTESIAN_POINT('',(-0.157133649513,2.178562431342E-03,0.151)); +#17871 = CARTESIAN_POINT('',(-0.157133649513,2.178562431342E-03,0.15)); +#17872 = CARTESIAN_POINT('',(-0.150187105637,2.321497846144E-03,0.151)); +#17873 = CARTESIAN_POINT('',(-0.150187105637,2.321497846144E-03,0.15)); +#17874 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.151)); +#17875 = CARTESIAN_POINT('',(-0.146627286585,2.394746388417E-03,0.15)); +#17876 = ADVANCED_FACE('',(#17877),#17911,.T.); +#17877 = FACE_BOUND('',#17878,.T.); +#17878 = EDGE_LOOP('',(#17879,#17903,#17909,#17910)); +#17879 = ORIENTED_EDGE('',*,*,#17880,.F.); +#17880 = EDGE_CURVE('',#17881,#17807,#17883,.T.); +#17881 = VERTEX_POINT('',#17882); +#17882 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.15)); +#17883 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#17884,#17885,#17886,#17887, + #17888,#17889,#17890,#17891,#17892,#17893,#17894,#17895,#17896, + #17897,#17898,#17899,#17900,#17901,#17902),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.082657255516E-02, + 0.13816903328,0.202475331534,0.263973754414,0.323380320598, + 0.381797622713,0.439390074519,0.496902724546,0.554662169609, + 0.612741878492,0.671538836391,0.73165572209,0.794297811614, + 0.859482204979,0.927681325453,1.),.UNSPECIFIED.); +#17884 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.15)); +#17885 = CARTESIAN_POINT('',(-0.14901270012,-0.192645777602,0.15)); +#17886 = CARTESIAN_POINT('',(-0.156361182956,-0.192486928724,0.15)); +#17887 = CARTESIAN_POINT('',(-0.167070322092,-0.191225478321,0.15)); +#17888 = CARTESIAN_POINT('',(-0.177149538377,-0.189199829692,0.15)); +#17889 = CARTESIAN_POINT('',(-0.186600166535,-0.186362205986,0.15)); +#17890 = CARTESIAN_POINT('',(-0.19538126328,-0.182600800808,0.15)); +#17891 = CARTESIAN_POINT('',(-0.203563666512,-0.178086901189,0.15)); +#17892 = CARTESIAN_POINT('',(-0.211091174492,-0.172715446386,0.15)); +#17893 = CARTESIAN_POINT('',(-0.217933273205,-0.166546681208,0.15)); +#17894 = CARTESIAN_POINT('',(-0.224031959178,-0.159611323529,0.15)); +#17895 = CARTESIAN_POINT('',(-0.229412550644,-0.152017862689,0.15)); +#17896 = CARTESIAN_POINT('',(-0.233882928184,-0.143713038816,0.15)); +#17897 = CARTESIAN_POINT('',(-0.237584800738,-0.13477921648,0.15)); +#17898 = CARTESIAN_POINT('',(-0.240413555445,-0.125177026454,0.15)); +#17899 = CARTESIAN_POINT('',(-0.242464124784,-0.114944935649,0.15)); +#17900 = CARTESIAN_POINT('',(-0.243648516798,-0.104054575992,0.15)); +#17901 = CARTESIAN_POINT('',(-0.243816160019,-9.658236764612E-02,0.15)); +#17902 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.15)); +#17903 = ORIENTED_EDGE('',*,*,#17904,.F.); +#17904 = EDGE_CURVE('',#17715,#17881,#17905,.T.); +#17905 = LINE('',#17906,#17907); +#17906 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.151)); +#17907 = VECTOR('',#17908,1.); +#17908 = DIRECTION('',(-0.,-0.,-1.)); +#17909 = ORIENTED_EDGE('',*,*,#17714,.T.); +#17910 = ORIENTED_EDGE('',*,*,#17830,.T.); +#17911 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#17912,#17913) + ,(#17914,#17915) + ,(#17916,#17917) + ,(#17918,#17919) + ,(#17920,#17921) + ,(#17922,#17923) + ,(#17924,#17925) + ,(#17926,#17927) + ,(#17928,#17929) + ,(#17930,#17931) + ,(#17932,#17933) + ,(#17934,#17935) + ,(#17936,#17937) + ,(#17938,#17939) + ,(#17940,#17941) + ,(#17942,#17943) + ,(#17944,#17945) + ,(#17946,#17947) + ,(#17948,#17949 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.082657255516E-02,0.13816903328,0.202475331534, + 0.263973754414,0.323380320598,0.381797622713,0.439390074519, + 0.496902724546,0.554662169609,0.612741878492,0.671538836391, + 0.73165572209,0.794297811614,0.859482204979,0.927681325453,1.),(0., + 1.),.UNSPECIFIED.); +#17912 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.151)); +#17913 = CARTESIAN_POINT('',(-0.145245807927,-0.192727204831,0.15)); +#17914 = CARTESIAN_POINT('',(-0.14901270012,-0.192645777602,0.151)); +#17915 = CARTESIAN_POINT('',(-0.14901270012,-0.192645777602,0.15)); +#17916 = CARTESIAN_POINT('',(-0.156361182956,-0.192486928724,0.151)); +#17917 = CARTESIAN_POINT('',(-0.156361182956,-0.192486928724,0.15)); +#17918 = CARTESIAN_POINT('',(-0.167070322092,-0.191225478321,0.151)); +#17919 = CARTESIAN_POINT('',(-0.167070322092,-0.191225478321,0.15)); +#17920 = CARTESIAN_POINT('',(-0.177149538377,-0.189199829692,0.151)); +#17921 = CARTESIAN_POINT('',(-0.177149538377,-0.189199829692,0.15)); +#17922 = CARTESIAN_POINT('',(-0.186600166535,-0.186362205986,0.151)); +#17923 = CARTESIAN_POINT('',(-0.186600166535,-0.186362205986,0.15)); +#17924 = CARTESIAN_POINT('',(-0.19538126328,-0.182600800808,0.151)); +#17925 = CARTESIAN_POINT('',(-0.19538126328,-0.182600800808,0.15)); +#17926 = CARTESIAN_POINT('',(-0.203563666512,-0.178086901189,0.151)); +#17927 = CARTESIAN_POINT('',(-0.203563666512,-0.178086901189,0.15)); +#17928 = CARTESIAN_POINT('',(-0.211091174492,-0.172715446386,0.151)); +#17929 = CARTESIAN_POINT('',(-0.211091174492,-0.172715446386,0.15)); +#17930 = CARTESIAN_POINT('',(-0.217933273205,-0.166546681208,0.151)); +#17931 = CARTESIAN_POINT('',(-0.217933273205,-0.166546681208,0.15)); +#17932 = CARTESIAN_POINT('',(-0.224031959178,-0.159611323529,0.151)); +#17933 = CARTESIAN_POINT('',(-0.224031959178,-0.159611323529,0.15)); +#17934 = CARTESIAN_POINT('',(-0.229412550644,-0.152017862689,0.151)); +#17935 = CARTESIAN_POINT('',(-0.229412550644,-0.152017862689,0.15)); +#17936 = CARTESIAN_POINT('',(-0.233882928184,-0.143713038816,0.151)); +#17937 = CARTESIAN_POINT('',(-0.233882928184,-0.143713038816,0.15)); +#17938 = CARTESIAN_POINT('',(-0.237584800738,-0.13477921648,0.151)); +#17939 = CARTESIAN_POINT('',(-0.237584800738,-0.13477921648,0.15)); +#17940 = CARTESIAN_POINT('',(-0.240413555445,-0.125177026454,0.151)); +#17941 = CARTESIAN_POINT('',(-0.240413555445,-0.125177026454,0.15)); +#17942 = CARTESIAN_POINT('',(-0.242464124784,-0.114944935649,0.151)); +#17943 = CARTESIAN_POINT('',(-0.242464124784,-0.114944935649,0.15)); +#17944 = CARTESIAN_POINT('',(-0.243648516798,-0.104054575992,0.151)); +#17945 = CARTESIAN_POINT('',(-0.243648516798,-0.104054575992,0.15)); +#17946 = CARTESIAN_POINT('',(-0.243816160019,-9.658236764612E-02,0.151) + ); +#17947 = CARTESIAN_POINT('',(-0.243816160019,-9.658236764612E-02,0.15)); +#17948 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.151) + ); +#17949 = CARTESIAN_POINT('',(-0.243902439024,-9.273673227012E-02,0.15)); +#17950 = ADVANCED_FACE('',(#17951),#17969,.T.); +#17951 = FACE_BOUND('',#17952,.T.); +#17952 = EDGE_LOOP('',(#17953,#17961,#17967,#17968)); +#17953 = ORIENTED_EDGE('',*,*,#17954,.F.); +#17954 = EDGE_CURVE('',#17955,#17881,#17957,.T.); +#17955 = VERTEX_POINT('',#17956); +#17956 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.15)); +#17957 = LINE('',#17958,#17959); +#17958 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.15)); +#17959 = VECTOR('',#17960,1.); +#17960 = DIRECTION('',(-1.,0.,0.)); +#17961 = ORIENTED_EDGE('',*,*,#17962,.F.); +#17962 = EDGE_CURVE('',#17739,#17955,#17963,.T.); +#17963 = LINE('',#17964,#17965); +#17964 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.151)); +#17965 = VECTOR('',#17966,1.); +#17966 = DIRECTION('',(-0.,-0.,-1.)); +#17967 = ORIENTED_EDGE('',*,*,#17738,.T.); +#17968 = ORIENTED_EDGE('',*,*,#17904,.T.); +#17969 = PLANE('',#17970); +#17970 = AXIS2_PLACEMENT_3D('',#17971,#17972,#17973); +#17971 = CARTESIAN_POINT('',(-0.109756097561,-0.192727204831,0.151)); +#17972 = DIRECTION('',(0.,-1.,0.)); +#17973 = DIRECTION('',(0.,-0.,-1.)); +#17974 = ADVANCED_FACE('',(#17975),#17986,.T.); +#17975 = FACE_BOUND('',#17976,.T.); +#17976 = EDGE_LOOP('',(#17977,#17983,#17984,#17985)); +#17977 = ORIENTED_EDGE('',*,*,#17978,.F.); +#17978 = EDGE_CURVE('',#17778,#17955,#17979,.T.); +#17979 = LINE('',#17980,#17981); +#17980 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.15)); +#17981 = VECTOR('',#17982,1.); +#17982 = DIRECTION('',(0.,-1.,0.)); +#17983 = ORIENTED_EDGE('',*,*,#17792,.F.); +#17984 = ORIENTED_EDGE('',*,*,#17746,.T.); +#17985 = ORIENTED_EDGE('',*,*,#17962,.T.); +#17986 = PLANE('',#17987); +#17987 = AXIS2_PLACEMENT_3D('',#17988,#17989,#17990); +#17988 = CARTESIAN_POINT('',(-0.109756097561,2.394746388417E-03,0.151)); +#17989 = DIRECTION('',(1.,0.,-0.)); +#17990 = DIRECTION('',(-0.,0.,-1.)); +#17991 = ADVANCED_FACE('',(#17992),#18017,.T.); +#17992 = FACE_BOUND('',#17993,.T.); +#17993 = EDGE_LOOP('',(#17994,#17995,#18003,#18011)); +#17994 = ORIENTED_EDGE('',*,*,#14463,.F.); +#17995 = ORIENTED_EDGE('',*,*,#17996,.F.); +#17996 = EDGE_CURVE('',#17997,#14464,#17999,.T.); +#17997 = VERTEX_POINT('',#17998); +#17998 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.151) + ); +#17999 = LINE('',#18000,#18001); +#18000 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.151) + ); +#18001 = VECTOR('',#18002,1.); +#18002 = DIRECTION('',(-0.,-0.,-1.)); +#18003 = ORIENTED_EDGE('',*,*,#18004,.T.); +#18004 = EDGE_CURVE('',#17997,#18005,#18007,.T.); +#18005 = VERTEX_POINT('',#18006); +#18006 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.151) + ); +#18007 = LINE('',#18008,#18009); +#18008 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.151) + ); +#18009 = VECTOR('',#18010,1.); +#18010 = DIRECTION('',(0.,-1.,0.)); +#18011 = ORIENTED_EDGE('',*,*,#18012,.T.); +#18012 = EDGE_CURVE('',#18005,#14466,#18013,.T.); +#18013 = LINE('',#18014,#18015); +#18014 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.151) + ); +#18015 = VECTOR('',#18016,1.); +#18016 = DIRECTION('',(-0.,-0.,-1.)); +#18017 = PLANE('',#18018); +#18018 = AXIS2_PLACEMENT_3D('',#18019,#18020,#18021); +#18019 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.192727204831,0.151) + ); +#18020 = DIRECTION('',(1.,0.,-0.)); +#18021 = DIRECTION('',(-0.,0.,-1.)); +#18022 = ADVANCED_FACE('',(#18023),#18041,.T.); +#18023 = FACE_BOUND('',#18024,.T.); +#18024 = EDGE_LOOP('',(#18025,#18026,#18027,#18035)); +#18025 = ORIENTED_EDGE('',*,*,#14473,.F.); +#18026 = ORIENTED_EDGE('',*,*,#18012,.F.); +#18027 = ORIENTED_EDGE('',*,*,#18028,.T.); +#18028 = EDGE_CURVE('',#18005,#18029,#18031,.T.); +#18029 = VERTEX_POINT('',#18030); +#18030 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.151)); +#18031 = LINE('',#18032,#18033); +#18032 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.151) + ); +#18033 = VECTOR('',#18034,1.); +#18034 = DIRECTION('',(1.,0.,0.)); +#18035 = ORIENTED_EDGE('',*,*,#18036,.T.); +#18036 = EDGE_CURVE('',#18029,#14474,#18037,.T.); +#18037 = LINE('',#18038,#18039); +#18038 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.151)); +#18039 = VECTOR('',#18040,1.); +#18040 = DIRECTION('',(-0.,-0.,-1.)); +#18041 = PLANE('',#18042); +#18042 = AXIS2_PLACEMENT_3D('',#18043,#18044,#18045); +#18043 = CARTESIAN_POINT('',(-2.743902439024E-02,-0.220166229221,0.151) + ); +#18044 = DIRECTION('',(0.,1.,0.)); +#18045 = DIRECTION('',(0.,-0.,1.)); +#18046 = ADVANCED_FACE('',(#18047),#18065,.T.); +#18047 = FACE_BOUND('',#18048,.T.); +#18048 = EDGE_LOOP('',(#18049,#18050,#18051,#18059)); +#18049 = ORIENTED_EDGE('',*,*,#14481,.F.); +#18050 = ORIENTED_EDGE('',*,*,#18036,.F.); +#18051 = ORIENTED_EDGE('',*,*,#18052,.T.); +#18052 = EDGE_CURVE('',#18029,#18053,#18055,.T.); +#18053 = VERTEX_POINT('',#18054); +#18054 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.151)); +#18055 = LINE('',#18056,#18057); +#18056 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.151)); +#18057 = VECTOR('',#18058,1.); +#18058 = DIRECTION('',(0.,1.,0.)); +#18059 = ORIENTED_EDGE('',*,*,#18060,.T.); +#18060 = EDGE_CURVE('',#18053,#14482,#18061,.T.); +#18061 = LINE('',#18062,#18063); +#18062 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.151)); +#18063 = VECTOR('',#18064,1.); +#18064 = DIRECTION('',(-0.,-0.,-1.)); +#18065 = PLANE('',#18066); +#18066 = AXIS2_PLACEMENT_3D('',#18067,#18068,#18069); +#18067 = CARTESIAN_POINT('',(0.106707317073,-0.220166229221,0.151)); +#18068 = DIRECTION('',(-1.,0.,0.)); +#18069 = DIRECTION('',(0.,0.,1.)); +#18070 = ADVANCED_FACE('',(#18071),#18089,.T.); +#18071 = FACE_BOUND('',#18072,.T.); +#18072 = EDGE_LOOP('',(#18073,#18074,#18075,#18083)); +#18073 = ORIENTED_EDGE('',*,*,#14489,.F.); +#18074 = ORIENTED_EDGE('',*,*,#18060,.F.); +#18075 = ORIENTED_EDGE('',*,*,#18076,.T.); +#18076 = EDGE_CURVE('',#18053,#18077,#18079,.T.); +#18077 = VERTEX_POINT('',#18078); +#18078 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02, + 0.151)); +#18079 = LINE('',#18080,#18081); +#18080 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.151)); +#18081 = VECTOR('',#18082,1.); +#18082 = DIRECTION('',(-1.,0.,0.)); +#18083 = ORIENTED_EDGE('',*,*,#18084,.T.); +#18084 = EDGE_CURVE('',#18077,#14490,#18085,.T.); +#18085 = LINE('',#18086,#18087); +#18086 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02, + 0.151)); +#18087 = VECTOR('',#18088,1.); +#18088 = DIRECTION('',(-0.,-0.,-1.)); +#18089 = PLANE('',#18090); +#18090 = AXIS2_PLACEMENT_3D('',#18091,#18092,#18093); +#18091 = CARTESIAN_POINT('',(0.106707317073,2.983377077866E-02,0.151)); +#18092 = DIRECTION('',(0.,-1.,0.)); +#18093 = DIRECTION('',(0.,-0.,-1.)); +#18094 = ADVANCED_FACE('',(#18095),#18113,.T.); +#18095 = FACE_BOUND('',#18096,.T.); +#18096 = EDGE_LOOP('',(#18097,#18098,#18099,#18107)); +#18097 = ORIENTED_EDGE('',*,*,#14497,.F.); +#18098 = ORIENTED_EDGE('',*,*,#18084,.F.); +#18099 = ORIENTED_EDGE('',*,*,#18100,.T.); +#18100 = EDGE_CURVE('',#18077,#18101,#18103,.T.); +#18101 = VERTEX_POINT('',#18102); +#18102 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03, + 0.151)); +#18103 = LINE('',#18104,#18105); +#18104 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02, + 0.151)); +#18105 = VECTOR('',#18106,1.); +#18106 = DIRECTION('',(0.,-1.,0.)); +#18107 = ORIENTED_EDGE('',*,*,#18108,.T.); +#18108 = EDGE_CURVE('',#18101,#14498,#18109,.T.); +#18109 = LINE('',#18110,#18111); +#18110 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03, + 0.151)); +#18111 = VECTOR('',#18112,1.); +#18112 = DIRECTION('',(-0.,-0.,-1.)); +#18113 = PLANE('',#18114); +#18114 = AXIS2_PLACEMENT_3D('',#18115,#18116,#18117); +#18115 = CARTESIAN_POINT('',(-2.134146341464E-02,2.983377077866E-02, + 0.151)); +#18116 = DIRECTION('',(1.,0.,-0.)); +#18117 = DIRECTION('',(-0.,0.,-1.)); +#18118 = ADVANCED_FACE('',(#18119),#18137,.T.); +#18119 = FACE_BOUND('',#18120,.T.); +#18120 = EDGE_LOOP('',(#18121,#18122,#18123,#18131)); +#18121 = ORIENTED_EDGE('',*,*,#14505,.F.); +#18122 = ORIENTED_EDGE('',*,*,#18108,.F.); +#18123 = ORIENTED_EDGE('',*,*,#18124,.T.); +#18124 = EDGE_CURVE('',#18101,#18125,#18127,.T.); +#18125 = VERTEX_POINT('',#18126); +#18126 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.151 + )); +#18127 = LINE('',#18128,#18129); +#18128 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03, + 0.151)); +#18129 = VECTOR('',#18130,1.); +#18130 = DIRECTION('',(1.,0.,0.)); +#18131 = ORIENTED_EDGE('',*,*,#18132,.T.); +#18132 = EDGE_CURVE('',#18125,#14506,#18133,.T.); +#18133 = LINE('',#18134,#18135); +#18134 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.151 + )); +#18135 = VECTOR('',#18136,1.); +#18136 = DIRECTION('',(-0.,-0.,-1.)); +#18137 = PLANE('',#18138); +#18138 = AXIS2_PLACEMENT_3D('',#18139,#18140,#18141); +#18139 = CARTESIAN_POINT('',(-2.134146341464E-02,2.394746388417E-03, + 0.151)); +#18140 = DIRECTION('',(0.,1.,0.)); +#18141 = DIRECTION('',(0.,-0.,1.)); +#18142 = ADVANCED_FACE('',(#18143),#18161,.T.); +#18143 = FACE_BOUND('',#18144,.T.); +#18144 = EDGE_LOOP('',(#18145,#18146,#18147,#18155)); +#18145 = ORIENTED_EDGE('',*,*,#14513,.F.); +#18146 = ORIENTED_EDGE('',*,*,#18132,.F.); +#18147 = ORIENTED_EDGE('',*,*,#18148,.T.); +#18148 = EDGE_CURVE('',#18125,#18149,#18151,.T.); +#18149 = VERTEX_POINT('',#18150); +#18150 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02, + 0.151)); +#18151 = LINE('',#18152,#18153); +#18152 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.151 + )); +#18153 = VECTOR('',#18154,1.); +#18154 = DIRECTION('',(0.,-1.,0.)); +#18155 = ORIENTED_EDGE('',*,*,#18156,.T.); +#18156 = EDGE_CURVE('',#18149,#14514,#18157,.T.); +#18157 = LINE('',#18158,#18159); +#18158 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02, + 0.151)); +#18159 = VECTOR('',#18160,1.); +#18160 = DIRECTION('',(-0.,-0.,-1.)); +#18161 = PLANE('',#18162); +#18162 = AXIS2_PLACEMENT_3D('',#18163,#18164,#18165); +#18163 = CARTESIAN_POINT('',(7.317073170732E-02,2.394746388417E-03,0.151 + )); +#18164 = DIRECTION('',(1.,0.,-0.)); +#18165 = DIRECTION('',(-0.,0.,-1.)); +#18166 = ADVANCED_FACE('',(#18167),#18185,.T.); +#18167 = FACE_BOUND('',#18168,.T.); +#18168 = EDGE_LOOP('',(#18169,#18170,#18171,#18179)); +#18169 = ORIENTED_EDGE('',*,*,#14521,.F.); +#18170 = ORIENTED_EDGE('',*,*,#18156,.F.); +#18171 = ORIENTED_EDGE('',*,*,#18172,.T.); +#18172 = EDGE_CURVE('',#18149,#18173,#18175,.T.); +#18173 = VERTEX_POINT('',#18174); +#18174 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.151)); +#18175 = LINE('',#18176,#18177); +#18176 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02, + 0.151)); +#18177 = VECTOR('',#18178,1.); +#18178 = DIRECTION('',(-1.,0.,0.)); +#18179 = ORIENTED_EDGE('',*,*,#18180,.T.); +#18180 = EDGE_CURVE('',#18173,#14522,#18181,.T.); +#18181 = LINE('',#18182,#18183); +#18182 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.151)); +#18183 = VECTOR('',#18184,1.); +#18184 = DIRECTION('',(-0.,-0.,-1.)); +#18185 = PLANE('',#18186); +#18186 = AXIS2_PLACEMENT_3D('',#18187,#18188,#18189); +#18187 = CARTESIAN_POINT('',(7.317073170732E-02,-7.992232678231E-02, + 0.151)); +#18188 = DIRECTION('',(0.,-1.,0.)); +#18189 = DIRECTION('',(0.,-0.,-1.)); +#18190 = ADVANCED_FACE('',(#18191),#18209,.T.); +#18191 = FACE_BOUND('',#18192,.T.); +#18192 = EDGE_LOOP('',(#18193,#18194,#18195,#18203)); +#18193 = ORIENTED_EDGE('',*,*,#14529,.F.); +#18194 = ORIENTED_EDGE('',*,*,#18180,.F.); +#18195 = ORIENTED_EDGE('',*,*,#18196,.T.); +#18196 = EDGE_CURVE('',#18173,#18197,#18199,.T.); +#18197 = VERTEX_POINT('',#18198); +#18198 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.151) + ); +#18199 = LINE('',#18200,#18201); +#18200 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.151)); +#18201 = VECTOR('',#18202,1.); +#18202 = DIRECTION('',(0.,-1.,0.)); +#18203 = ORIENTED_EDGE('',*,*,#18204,.T.); +#18204 = EDGE_CURVE('',#18197,#14530,#18205,.T.); +#18205 = LINE('',#18206,#18207); +#18206 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.151) + ); +#18207 = VECTOR('',#18208,1.); +#18208 = DIRECTION('',(-0.,-0.,-1.)); +#18209 = PLANE('',#18210); +#18210 = AXIS2_PLACEMENT_3D('',#18211,#18212,#18213); +#18211 = CARTESIAN_POINT('',(-1.524390243903E-02,-7.992232678231E-02, + 0.151)); +#18212 = DIRECTION('',(1.,0.,-0.)); +#18213 = DIRECTION('',(-0.,0.,-1.)); +#18214 = ADVANCED_FACE('',(#18215),#18233,.T.); +#18215 = FACE_BOUND('',#18216,.T.); +#18216 = EDGE_LOOP('',(#18217,#18218,#18219,#18227)); +#18217 = ORIENTED_EDGE('',*,*,#14537,.F.); +#18218 = ORIENTED_EDGE('',*,*,#18204,.F.); +#18219 = ORIENTED_EDGE('',*,*,#18220,.T.); +#18220 = EDGE_CURVE('',#18197,#18221,#18223,.T.); +#18221 = VERTEX_POINT('',#18222); +#18222 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.151)); +#18223 = LINE('',#18224,#18225); +#18224 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.151) + ); +#18225 = VECTOR('',#18226,1.); +#18226 = DIRECTION('',(1.,0.,0.)); +#18227 = ORIENTED_EDGE('',*,*,#18228,.T.); +#18228 = EDGE_CURVE('',#18221,#14538,#18229,.T.); +#18229 = LINE('',#18230,#18231); +#18230 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.151)); +#18231 = VECTOR('',#18232,1.); +#18232 = DIRECTION('',(-0.,-0.,-1.)); +#18233 = PLANE('',#18234); +#18234 = AXIS2_PLACEMENT_3D('',#18235,#18236,#18237); +#18235 = CARTESIAN_POINT('',(-1.524390243903E-02,-0.107361351173,0.151) + ); +#18236 = DIRECTION('',(0.,1.,0.)); +#18237 = DIRECTION('',(0.,-0.,1.)); +#18238 = ADVANCED_FACE('',(#18239),#18257,.T.); +#18239 = FACE_BOUND('',#18240,.T.); +#18240 = EDGE_LOOP('',(#18241,#18242,#18243,#18251)); +#18241 = ORIENTED_EDGE('',*,*,#14545,.F.); +#18242 = ORIENTED_EDGE('',*,*,#18228,.F.); +#18243 = ORIENTED_EDGE('',*,*,#18244,.T.); +#18244 = EDGE_CURVE('',#18221,#18245,#18247,.T.); +#18245 = VERTEX_POINT('',#18246); +#18246 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.151)); +#18247 = LINE('',#18248,#18249); +#18248 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.151)); +#18249 = VECTOR('',#18250,1.); +#18250 = DIRECTION('',(0.,-1.,0.)); +#18251 = ORIENTED_EDGE('',*,*,#18252,.T.); +#18252 = EDGE_CURVE('',#18245,#14546,#18253,.T.); +#18253 = LINE('',#18254,#18255); +#18254 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.151)); +#18255 = VECTOR('',#18256,1.); +#18256 = DIRECTION('',(-0.,-0.,-1.)); +#18257 = PLANE('',#18258); +#18258 = AXIS2_PLACEMENT_3D('',#18259,#18260,#18261); +#18259 = CARTESIAN_POINT('',(7.317073170732E-02,-0.107361351173,0.151)); +#18260 = DIRECTION('',(1.,0.,-0.)); +#18261 = DIRECTION('',(-0.,0.,-1.)); +#18262 = ADVANCED_FACE('',(#18263),#18274,.T.); +#18263 = FACE_BOUND('',#18264,.T.); +#18264 = EDGE_LOOP('',(#18265,#18266,#18267,#18273)); +#18265 = ORIENTED_EDGE('',*,*,#14553,.F.); +#18266 = ORIENTED_EDGE('',*,*,#18252,.F.); +#18267 = ORIENTED_EDGE('',*,*,#18268,.T.); +#18268 = EDGE_CURVE('',#18245,#17997,#18269,.T.); +#18269 = LINE('',#18270,#18271); +#18270 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.151)); +#18271 = VECTOR('',#18272,1.); +#18272 = DIRECTION('',(-1.,0.,0.)); +#18273 = ORIENTED_EDGE('',*,*,#17996,.T.); +#18274 = PLANE('',#18275); +#18275 = AXIS2_PLACEMENT_3D('',#18276,#18277,#18278); +#18276 = CARTESIAN_POINT('',(7.317073170732E-02,-0.192727204831,0.151)); +#18277 = DIRECTION('',(0.,-1.,0.)); +#18278 = DIRECTION('',(0.,-0.,-1.)); +#18279 = ADVANCED_FACE('',(#18280),#18294,.F.); +#18280 = FACE_BOUND('',#18281,.T.); +#18281 = EDGE_LOOP('',(#18282,#18283,#18284,#18285,#18286,#18287,#18288, + #18289,#18290,#18291,#18292,#18293)); +#18282 = ORIENTED_EDGE('',*,*,#18004,.F.); +#18283 = ORIENTED_EDGE('',*,*,#18268,.F.); +#18284 = ORIENTED_EDGE('',*,*,#18244,.F.); +#18285 = ORIENTED_EDGE('',*,*,#18220,.F.); +#18286 = ORIENTED_EDGE('',*,*,#18196,.F.); +#18287 = ORIENTED_EDGE('',*,*,#18172,.F.); +#18288 = ORIENTED_EDGE('',*,*,#18148,.F.); +#18289 = ORIENTED_EDGE('',*,*,#18124,.F.); +#18290 = ORIENTED_EDGE('',*,*,#18100,.F.); +#18291 = ORIENTED_EDGE('',*,*,#18076,.F.); +#18292 = ORIENTED_EDGE('',*,*,#18052,.F.); +#18293 = ORIENTED_EDGE('',*,*,#18028,.F.); +#18294 = PLANE('',#18295); +#18295 = AXIS2_PLACEMENT_3D('',#18296,#18297,#18298); +#18296 = CARTESIAN_POINT('',(0.,0.,0.151)); +#18297 = DIRECTION('',(-0.,0.,1.)); +#18298 = DIRECTION('',(1.,0.,0.)); +#18299 = ADVANCED_FACE('',(#18300),#18325,.T.); +#18300 = FACE_BOUND('',#18301,.T.); +#18301 = EDGE_LOOP('',(#18302,#18303,#18311,#18319)); +#18302 = ORIENTED_EDGE('',*,*,#13967,.F.); +#18303 = ORIENTED_EDGE('',*,*,#18304,.F.); +#18304 = EDGE_CURVE('',#18305,#13968,#18307,.T.); +#18305 = VERTEX_POINT('',#18306); +#18306 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18307 = LINE('',#18308,#18309); +#18308 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18309 = VECTOR('',#18310,1.); +#18310 = DIRECTION('',(-0.,-0.,-1.)); +#18311 = ORIENTED_EDGE('',*,*,#18312,.T.); +#18312 = EDGE_CURVE('',#18305,#18313,#18315,.T.); +#18313 = VERTEX_POINT('',#18314); +#18314 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.151)); +#18315 = LINE('',#18316,#18317); +#18316 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18317 = VECTOR('',#18318,1.); +#18318 = DIRECTION('',(0.,-1.,0.)); +#18319 = ORIENTED_EDGE('',*,*,#18320,.T.); +#18320 = EDGE_CURVE('',#18313,#13970,#18321,.T.); +#18321 = LINE('',#18322,#18323); +#18322 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.151)); +#18323 = VECTOR('',#18324,1.); +#18324 = DIRECTION('',(-0.,-0.,-1.)); +#18325 = PLANE('',#18326); +#18326 = AXIS2_PLACEMENT_3D('',#18327,#18328,#18329); +#18327 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18328 = DIRECTION('',(1.,0.,-0.)); +#18329 = DIRECTION('',(-0.,0.,-1.)); +#18330 = ADVANCED_FACE('',(#18331),#18357,.T.); +#18331 = FACE_BOUND('',#18332,.T.); +#18332 = EDGE_LOOP('',(#18333,#18334,#18335,#18351)); +#18333 = ORIENTED_EDGE('',*,*,#13977,.F.); +#18334 = ORIENTED_EDGE('',*,*,#18320,.F.); +#18335 = ORIENTED_EDGE('',*,*,#18336,.T.); +#18336 = EDGE_CURVE('',#18313,#18337,#18339,.T.); +#18337 = VERTEX_POINT('',#18338); +#18338 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18339 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18340,#18341,#18342,#18343, + #18344,#18345,#18346,#18347,#18348,#18349,#18350),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.112448389909,0.226527675213, + 0.344401949326,0.465864972487,0.591659449352,0.722168487025, + 0.858606387555,1.),.UNSPECIFIED.); +#18340 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.151)); +#18341 = CARTESIAN_POINT('',(0.157833652572,-0.208503724566,0.151)); +#18342 = CARTESIAN_POINT('',(0.162559370965,-0.211112128714,0.151)); +#18343 = CARTESIAN_POINT('',(0.170116787086,-0.214330651243,0.151)); +#18344 = CARTESIAN_POINT('',(0.178069020317,-0.217106778395,0.151)); +#18345 = CARTESIAN_POINT('',(0.186485673437,-0.219320490785,0.151)); +#18346 = CARTESIAN_POINT('',(0.195310795015,-0.221099594723,0.151)); +#18347 = CARTESIAN_POINT('',(0.204591147324,-0.222304645569,0.151)); +#18348 = CARTESIAN_POINT('',(0.214289964556,-0.223097891322,0.151)); +#18349 = CARTESIAN_POINT('',(0.220907916226,-0.223175508757,0.151)); +#18350 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18351 = ORIENTED_EDGE('',*,*,#18352,.T.); +#18352 = EDGE_CURVE('',#18337,#13978,#18353,.T.); +#18353 = LINE('',#18354,#18355); +#18354 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18355 = VECTOR('',#18356,1.); +#18356 = DIRECTION('',(-0.,-0.,-1.)); +#18357 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18358,#18359) + ,(#18360,#18361) + ,(#18362,#18363) + ,(#18364,#18365) + ,(#18366,#18367) + ,(#18368,#18369) + ,(#18370,#18371) + ,(#18372,#18373) + ,(#18374,#18375) + ,(#18376,#18377) + ,(#18378,#18379 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.112448389909,0.226527675213,0.344401949326,0.465864972487, + 0.591659449352,0.722168487025,0.858606387555,1.),(0.,1.), + .UNSPECIFIED.); +#18358 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.151)); +#18359 = CARTESIAN_POINT('',(0.155487804878,-0.207208912148,0.15)); +#18360 = CARTESIAN_POINT('',(0.157833652572,-0.208503724566,0.151)); +#18361 = CARTESIAN_POINT('',(0.157833652572,-0.208503724566,0.15)); +#18362 = CARTESIAN_POINT('',(0.162559370965,-0.211112128714,0.151)); +#18363 = CARTESIAN_POINT('',(0.162559370965,-0.211112128714,0.15)); +#18364 = CARTESIAN_POINT('',(0.170116787086,-0.214330651243,0.151)); +#18365 = CARTESIAN_POINT('',(0.170116787086,-0.214330651243,0.15)); +#18366 = CARTESIAN_POINT('',(0.178069020317,-0.217106778395,0.151)); +#18367 = CARTESIAN_POINT('',(0.178069020317,-0.217106778395,0.15)); +#18368 = CARTESIAN_POINT('',(0.186485673437,-0.219320490785,0.151)); +#18369 = CARTESIAN_POINT('',(0.186485673437,-0.219320490785,0.15)); +#18370 = CARTESIAN_POINT('',(0.195310795015,-0.221099594723,0.151)); +#18371 = CARTESIAN_POINT('',(0.195310795015,-0.221099594723,0.15)); +#18372 = CARTESIAN_POINT('',(0.204591147324,-0.222304645569,0.151)); +#18373 = CARTESIAN_POINT('',(0.204591147324,-0.222304645569,0.15)); +#18374 = CARTESIAN_POINT('',(0.214289964556,-0.223097891322,0.151)); +#18375 = CARTESIAN_POINT('',(0.214289964556,-0.223097891322,0.15)); +#18376 = CARTESIAN_POINT('',(0.220907916226,-0.223175508757,0.151)); +#18377 = CARTESIAN_POINT('',(0.220907916226,-0.223175508757,0.15)); +#18378 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18379 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.15)); +#18380 = ADVANCED_FACE('',(#18381),#18415,.T.); +#18381 = FACE_BOUND('',#18382,.T.); +#18382 = EDGE_LOOP('',(#18383,#18384,#18385,#18409)); +#18383 = ORIENTED_EDGE('',*,*,#13993,.F.); +#18384 = ORIENTED_EDGE('',*,*,#18352,.F.); +#18385 = ORIENTED_EDGE('',*,*,#18386,.T.); +#18386 = EDGE_CURVE('',#18337,#18387,#18389,.T.); +#18387 = VERTEX_POINT('',#18388); +#18388 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18389 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18390,#18391,#18392,#18393, + #18394,#18395,#18396,#18397,#18398,#18399,#18400,#18401,#18402, + #18403,#18404,#18405,#18406,#18407,#18408),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.783324845577E-02, + 0.132655536508,0.195050884051,0.255582933069,0.314799834147, + 0.373600472826,0.432545595327,0.492430629284,0.552671255963, + 0.612513044188,0.672610250357,0.733838369314,0.796594238568, + 0.861449799291,0.929198942351,1.),.UNSPECIFIED.); +#18390 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18391 = CARTESIAN_POINT('',(0.228615680022,-0.223118220438,0.151)); +#18392 = CARTESIAN_POINT('',(0.237102578688,-0.222928938147,0.151)); +#18393 = CARTESIAN_POINT('',(0.249500694155,-0.221336800082,0.151)); +#18394 = CARTESIAN_POINT('',(0.26122976335,-0.218678671358,0.151)); +#18395 = CARTESIAN_POINT('',(0.272285712409,-0.21494390278,0.151)); +#18396 = CARTESIAN_POINT('',(0.282707220224,-0.210224633355,0.151)); +#18397 = CARTESIAN_POINT('',(0.292440302344,-0.204391150756,0.151)); +#18398 = CARTESIAN_POINT('',(0.301420549512,-0.197397514411,0.151)); +#18399 = CARTESIAN_POINT('',(0.30976679401,-0.189525641653,0.151)); +#18400 = CARTESIAN_POINT('',(0.317213881919,-0.180718114888,0.151)); +#18401 = CARTESIAN_POINT('',(0.323732401999,-0.171191443683,0.151)); +#18402 = CARTESIAN_POINT('',(0.329247039144,-0.160975259276,0.151)); +#18403 = CARTESIAN_POINT('',(0.333721794519,-0.150063953105,0.151)); +#18404 = CARTESIAN_POINT('',(0.337208952873,-0.138479674206,0.151)); +#18405 = CARTESIAN_POINT('',(0.33964758708,-0.126211995098,0.151)); +#18406 = CARTESIAN_POINT('',(0.341232371405,-0.113278127127,0.151)); +#18407 = CARTESIAN_POINT('',(0.341385277511,-0.104412677963,0.151)); +#18408 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18409 = ORIENTED_EDGE('',*,*,#18410,.T.); +#18410 = EDGE_CURVE('',#18387,#13994,#18411,.T.); +#18411 = LINE('',#18412,#18413); +#18412 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18413 = VECTOR('',#18414,1.); +#18414 = DIRECTION('',(-0.,-0.,-1.)); +#18415 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18416,#18417) + ,(#18418,#18419) + ,(#18420,#18421) + ,(#18422,#18423) + ,(#18424,#18425) + ,(#18426,#18427) + ,(#18428,#18429) + ,(#18430,#18431) + ,(#18432,#18433) + ,(#18434,#18435) + ,(#18436,#18437) + ,(#18438,#18439) + ,(#18440,#18441) + ,(#18442,#18443) + ,(#18444,#18445) + ,(#18446,#18447) + ,(#18448,#18449) + ,(#18450,#18451) + ,(#18452,#18453 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.783324845577E-02,0.132655536508,0.195050884051, + 0.255582933069,0.314799834147,0.373600472826,0.432545595327, + 0.492430629284,0.552671255963,0.612513044188,0.672610250357, + 0.733838369314,0.796594238568,0.861449799291,0.929198942351,1.),(0., + 1.),.UNSPECIFIED.); +#18416 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.151)); +#18417 = CARTESIAN_POINT('',(0.224275914634,-0.223215009709,0.15)); +#18418 = CARTESIAN_POINT('',(0.228615680022,-0.223118220438,0.151)); +#18419 = CARTESIAN_POINT('',(0.228615680022,-0.223118220438,0.15)); +#18420 = CARTESIAN_POINT('',(0.237102578688,-0.222928938147,0.151)); +#18421 = CARTESIAN_POINT('',(0.237102578688,-0.222928938147,0.15)); +#18422 = CARTESIAN_POINT('',(0.249500694155,-0.221336800082,0.151)); +#18423 = CARTESIAN_POINT('',(0.249500694155,-0.221336800082,0.15)); +#18424 = CARTESIAN_POINT('',(0.26122976335,-0.218678671358,0.151)); +#18425 = CARTESIAN_POINT('',(0.26122976335,-0.218678671358,0.15)); +#18426 = CARTESIAN_POINT('',(0.272285712409,-0.21494390278,0.151)); +#18427 = CARTESIAN_POINT('',(0.272285712409,-0.21494390278,0.15)); +#18428 = CARTESIAN_POINT('',(0.282707220224,-0.210224633355,0.151)); +#18429 = CARTESIAN_POINT('',(0.282707220224,-0.210224633355,0.15)); +#18430 = CARTESIAN_POINT('',(0.292440302344,-0.204391150756,0.151)); +#18431 = CARTESIAN_POINT('',(0.292440302344,-0.204391150756,0.15)); +#18432 = CARTESIAN_POINT('',(0.301420549512,-0.197397514411,0.151)); +#18433 = CARTESIAN_POINT('',(0.301420549512,-0.197397514411,0.15)); +#18434 = CARTESIAN_POINT('',(0.30976679401,-0.189525641653,0.151)); +#18435 = CARTESIAN_POINT('',(0.30976679401,-0.189525641653,0.15)); +#18436 = CARTESIAN_POINT('',(0.317213881919,-0.180718114888,0.151)); +#18437 = CARTESIAN_POINT('',(0.317213881919,-0.180718114888,0.15)); +#18438 = CARTESIAN_POINT('',(0.323732401999,-0.171191443683,0.151)); +#18439 = CARTESIAN_POINT('',(0.323732401999,-0.171191443683,0.15)); +#18440 = CARTESIAN_POINT('',(0.329247039144,-0.160975259276,0.151)); +#18441 = CARTESIAN_POINT('',(0.329247039144,-0.160975259276,0.15)); +#18442 = CARTESIAN_POINT('',(0.333721794519,-0.150063953105,0.151)); +#18443 = CARTESIAN_POINT('',(0.333721794519,-0.150063953105,0.15)); +#18444 = CARTESIAN_POINT('',(0.337208952873,-0.138479674206,0.151)); +#18445 = CARTESIAN_POINT('',(0.337208952873,-0.138479674206,0.15)); +#18446 = CARTESIAN_POINT('',(0.33964758708,-0.126211995098,0.151)); +#18447 = CARTESIAN_POINT('',(0.33964758708,-0.126211995098,0.15)); +#18448 = CARTESIAN_POINT('',(0.341232371405,-0.113278127127,0.151)); +#18449 = CARTESIAN_POINT('',(0.341232371405,-0.113278127127,0.15)); +#18450 = CARTESIAN_POINT('',(0.341385277511,-0.104412677963,0.151)); +#18451 = CARTESIAN_POINT('',(0.341385277511,-0.104412677963,0.15)); +#18452 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18453 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.15)); +#18454 = ADVANCED_FACE('',(#18455),#18489,.T.); +#18455 = FACE_BOUND('',#18456,.T.); +#18456 = EDGE_LOOP('',(#18457,#18458,#18459,#18483)); +#18457 = ORIENTED_EDGE('',*,*,#14017,.F.); +#18458 = ORIENTED_EDGE('',*,*,#18410,.F.); +#18459 = ORIENTED_EDGE('',*,*,#18460,.T.); +#18460 = EDGE_CURVE('',#18387,#18461,#18463,.T.); +#18461 = VERTEX_POINT('',#18462); +#18462 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18463 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18464,#18465,#18466,#18467, + #18468,#18469,#18470,#18471,#18472,#18473,#18474,#18475,#18476, + #18477,#18478,#18479,#18480,#18481,#18482),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.064371857535E-02, + 0.138256715509,0.203364124218,0.266324093803,0.327904761543, + 0.388737715173,0.449423528109,0.510861011459,0.572079396048, + 0.631734428731,0.691117210579,0.75036002949,0.810032900531, + 0.871362450829,0.934427141231,1.),.UNSPECIFIED.); +#18464 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18465 = CARTESIAN_POINT('',(0.34135453377,-9.501843376096E-02,0.151)); +#18466 = CARTESIAN_POINT('',(0.341141443195,-8.549934586882E-02,0.151)); +#18467 = CARTESIAN_POINT('',(0.339447664274,-7.158010627453E-02,0.151)); +#18468 = CARTESIAN_POINT('',(0.336668449673,-5.838160741073E-02,0.151)); +#18469 = CARTESIAN_POINT('',(0.332691028588,-4.592388424087E-02,0.151)); +#18470 = CARTESIAN_POINT('',(0.327626106034,-3.419009934494E-02,0.151)); +#18471 = CARTESIAN_POINT('',(0.32146937733,-2.316463987145E-02,0.151)); +#18472 = CARTESIAN_POINT('',(0.314120802037,-1.290431242463E-02,0.151)); +#18473 = CARTESIAN_POINT('',(0.305697408414,-3.478855919552E-03,0.151)); +#18474 = CARTESIAN_POINT('',(0.296477919733,5.064520705757E-03,0.151)); +#18475 = CARTESIAN_POINT('',(0.286530130439,1.251962640766E-02,0.151)); +#18476 = CARTESIAN_POINT('',(0.275974035462,1.881981363007E-02,0.151)); +#18477 = CARTESIAN_POINT('',(0.264824576437,2.400662773259E-02,0.151)); +#18478 = CARTESIAN_POINT('',(0.253040766104,2.796594344877E-02,0.151)); +#18479 = CARTESIAN_POINT('',(0.240677737658,3.080941882068E-02,0.151)); +#18480 = CARTESIAN_POINT('',(0.227692913127,3.257140091851E-02,0.151)); +#18481 = CARTESIAN_POINT('',(0.218835035096,3.27774950131E-02,0.151)); +#18482 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18483 = ORIENTED_EDGE('',*,*,#18484,.T.); +#18484 = EDGE_CURVE('',#18461,#14018,#18485,.T.); +#18485 = LINE('',#18486,#18487); +#18486 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18487 = VECTOR('',#18488,1.); +#18488 = DIRECTION('',(-0.,-0.,-1.)); +#18489 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18490,#18491) + ,(#18492,#18493) + ,(#18494,#18495) + ,(#18496,#18497) + ,(#18498,#18499) + ,(#18500,#18501) + ,(#18502,#18503) + ,(#18504,#18505) + ,(#18506,#18507) + ,(#18508,#18509) + ,(#18510,#18511) + ,(#18512,#18513) + ,(#18514,#18515) + ,(#18516,#18517) + ,(#18518,#18519) + ,(#18520,#18521) + ,(#18522,#18523) + ,(#18524,#18525) + ,(#18526,#18527 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.064371857535E-02,0.138256715509,0.203364124218, + 0.266324093803,0.327904761543,0.388737715173,0.449423528109, + 0.510861011459,0.572079396048,0.631734428731,0.691117210579, + 0.75036002949,0.810032900531,0.871362450829,0.934427141231,1.),(0., + 1.),.UNSPECIFIED.); +#18490 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.151)); +#18491 = CARTESIAN_POINT('',(0.341463414634,-9.988231153841E-02,0.15)); +#18492 = CARTESIAN_POINT('',(0.34135453377,-9.501843376096E-02,0.151)); +#18493 = CARTESIAN_POINT('',(0.34135453377,-9.501843376096E-02,0.15)); +#18494 = CARTESIAN_POINT('',(0.341141443195,-8.549934586882E-02,0.151)); +#18495 = CARTESIAN_POINT('',(0.341141443195,-8.549934586882E-02,0.15)); +#18496 = CARTESIAN_POINT('',(0.339447664274,-7.158010627453E-02,0.151)); +#18497 = CARTESIAN_POINT('',(0.339447664274,-7.158010627453E-02,0.15)); +#18498 = CARTESIAN_POINT('',(0.336668449673,-5.838160741073E-02,0.151)); +#18499 = CARTESIAN_POINT('',(0.336668449673,-5.838160741073E-02,0.15)); +#18500 = CARTESIAN_POINT('',(0.332691028588,-4.592388424087E-02,0.151)); +#18501 = CARTESIAN_POINT('',(0.332691028588,-4.592388424087E-02,0.15)); +#18502 = CARTESIAN_POINT('',(0.327626106034,-3.419009934494E-02,0.151)); +#18503 = CARTESIAN_POINT('',(0.327626106034,-3.419009934494E-02,0.15)); +#18504 = CARTESIAN_POINT('',(0.32146937733,-2.316463987145E-02,0.151)); +#18505 = CARTESIAN_POINT('',(0.32146937733,-2.316463987145E-02,0.15)); +#18506 = CARTESIAN_POINT('',(0.314120802037,-1.290431242463E-02,0.151)); +#18507 = CARTESIAN_POINT('',(0.314120802037,-1.290431242463E-02,0.15)); +#18508 = CARTESIAN_POINT('',(0.305697408414,-3.478855919552E-03,0.151)); +#18509 = CARTESIAN_POINT('',(0.305697408414,-3.478855919552E-03,0.15)); +#18510 = CARTESIAN_POINT('',(0.296477919733,5.064520705757E-03,0.151)); +#18511 = CARTESIAN_POINT('',(0.296477919733,5.064520705757E-03,0.15)); +#18512 = CARTESIAN_POINT('',(0.286530130439,1.251962640766E-02,0.151)); +#18513 = CARTESIAN_POINT('',(0.286530130439,1.251962640766E-02,0.15)); +#18514 = CARTESIAN_POINT('',(0.275974035462,1.881981363007E-02,0.151)); +#18515 = CARTESIAN_POINT('',(0.275974035462,1.881981363007E-02,0.15)); +#18516 = CARTESIAN_POINT('',(0.264824576437,2.400662773259E-02,0.151)); +#18517 = CARTESIAN_POINT('',(0.264824576437,2.400662773259E-02,0.15)); +#18518 = CARTESIAN_POINT('',(0.253040766104,2.796594344877E-02,0.151)); +#18519 = CARTESIAN_POINT('',(0.253040766104,2.796594344877E-02,0.15)); +#18520 = CARTESIAN_POINT('',(0.240677737658,3.080941882068E-02,0.151)); +#18521 = CARTESIAN_POINT('',(0.240677737658,3.080941882068E-02,0.15)); +#18522 = CARTESIAN_POINT('',(0.227692913127,3.257140091851E-02,0.151)); +#18523 = CARTESIAN_POINT('',(0.227692913127,3.257140091851E-02,0.15)); +#18524 = CARTESIAN_POINT('',(0.218835035096,3.27774950131E-02,0.151)); +#18525 = CARTESIAN_POINT('',(0.218835035096,3.27774950131E-02,0.15)); +#18526 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18527 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.15)); +#18528 = ADVANCED_FACE('',(#18529),#18555,.T.); +#18529 = FACE_BOUND('',#18530,.T.); +#18530 = EDGE_LOOP('',(#18531,#18532,#18533,#18549)); +#18531 = ORIENTED_EDGE('',*,*,#14041,.F.); +#18532 = ORIENTED_EDGE('',*,*,#18484,.F.); +#18533 = ORIENTED_EDGE('',*,*,#18534,.T.); +#18534 = EDGE_CURVE('',#18461,#18535,#18537,.T.); +#18535 = VERTEX_POINT('',#18536); +#18536 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18537 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18538,#18539,#18540,#18541, + #18542,#18543,#18544,#18545,#18546,#18547,#18548),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.145186866472,0.28344261092, + 0.416524365929,0.543181123535,0.665153082638,0.781360206313, + 0.892756655642,1.),.UNSPECIFIED.); +#18538 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18539 = CARTESIAN_POINT('',(0.211413025698,3.286171515756E-02,0.151)); +#18540 = CARTESIAN_POINT('',(0.205738359986,3.282103764139E-02,0.151)); +#18541 = CARTESIAN_POINT('',(0.197413548744,3.231093782495E-02,0.151)); +#18542 = CARTESIAN_POINT('',(0.189476729462,3.159001064541E-02,0.151)); +#18543 = CARTESIAN_POINT('',(0.181916416626,3.046585521142E-02,0.151)); +#18544 = CARTESIAN_POINT('',(0.174732999256,2.912766536345E-02,0.151)); +#18545 = CARTESIAN_POINT('',(0.167953387516,2.738327073211E-02,0.151)); +#18546 = CARTESIAN_POINT('',(0.161534963432,2.542868966077E-02,0.151)); +#18547 = CARTESIAN_POINT('',(0.157477835756,2.378181208882E-02,0.151)); +#18548 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18549 = ORIENTED_EDGE('',*,*,#18550,.T.); +#18550 = EDGE_CURVE('',#18535,#14042,#18551,.T.); +#18551 = LINE('',#18552,#18553); +#18552 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18553 = VECTOR('',#18554,1.); +#18554 = DIRECTION('',(-0.,-0.,-1.)); +#18555 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18556,#18557) + ,(#18558,#18559) + ,(#18560,#18561) + ,(#18562,#18563) + ,(#18564,#18565) + ,(#18566,#18567) + ,(#18568,#18569) + ,(#18570,#18571) + ,(#18572,#18573) + ,(#18574,#18575) + ,(#18576,#18577 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.145186866472,0.28344261092,0.416524365929,0.543181123535, + 0.665153082638,0.781360206313,0.892756655642,1.),(0.,1.), + .UNSPECIFIED.); +#18556 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.151)); +#18557 = CARTESIAN_POINT('',(0.214319740854,3.288255126647E-02,0.15)); +#18558 = CARTESIAN_POINT('',(0.211413025698,3.286171515756E-02,0.151)); +#18559 = CARTESIAN_POINT('',(0.211413025698,3.286171515756E-02,0.15)); +#18560 = CARTESIAN_POINT('',(0.205738359986,3.282103764139E-02,0.151)); +#18561 = CARTESIAN_POINT('',(0.205738359986,3.282103764139E-02,0.15)); +#18562 = CARTESIAN_POINT('',(0.197413548744,3.231093782495E-02,0.151)); +#18563 = CARTESIAN_POINT('',(0.197413548744,3.231093782495E-02,0.15)); +#18564 = CARTESIAN_POINT('',(0.189476729462,3.159001064541E-02,0.151)); +#18565 = CARTESIAN_POINT('',(0.189476729462,3.159001064541E-02,0.15)); +#18566 = CARTESIAN_POINT('',(0.181916416626,3.046585521142E-02,0.151)); +#18567 = CARTESIAN_POINT('',(0.181916416626,3.046585521142E-02,0.15)); +#18568 = CARTESIAN_POINT('',(0.174732999256,2.912766536345E-02,0.151)); +#18569 = CARTESIAN_POINT('',(0.174732999256,2.912766536345E-02,0.15)); +#18570 = CARTESIAN_POINT('',(0.167953387516,2.738327073211E-02,0.151)); +#18571 = CARTESIAN_POINT('',(0.167953387516,2.738327073211E-02,0.15)); +#18572 = CARTESIAN_POINT('',(0.161534963432,2.542868966077E-02,0.151)); +#18573 = CARTESIAN_POINT('',(0.161534963432,2.542868966077E-02,0.15)); +#18574 = CARTESIAN_POINT('',(0.157477835756,2.378181208882E-02,0.151)); +#18575 = CARTESIAN_POINT('',(0.157477835756,2.378181208882E-02,0.15)); +#18576 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18577 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.15)); +#18578 = ADVANCED_FACE('',(#18579),#18597,.T.); +#18579 = FACE_BOUND('',#18580,.T.); +#18580 = EDGE_LOOP('',(#18581,#18582,#18583,#18591)); +#18581 = ORIENTED_EDGE('',*,*,#14057,.F.); +#18582 = ORIENTED_EDGE('',*,*,#18550,.F.); +#18583 = ORIENTED_EDGE('',*,*,#18584,.T.); +#18584 = EDGE_CURVE('',#18535,#18585,#18587,.T.); +#18585 = VERTEX_POINT('',#18586); +#18586 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.151)); +#18587 = LINE('',#18588,#18589); +#18588 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18589 = VECTOR('',#18590,1.); +#18590 = DIRECTION('',(0.,-1.,0.)); +#18591 = ORIENTED_EDGE('',*,*,#18592,.T.); +#18592 = EDGE_CURVE('',#18585,#14058,#18593,.T.); +#18593 = LINE('',#18594,#18595); +#18594 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.151)); +#18595 = VECTOR('',#18596,1.); +#18596 = DIRECTION('',(-0.,-0.,-1.)); +#18597 = PLANE('',#18598); +#18598 = AXIS2_PLACEMENT_3D('',#18599,#18600,#18601); +#18599 = CARTESIAN_POINT('',(0.155487804878,2.29740146811E-02,0.151)); +#18600 = DIRECTION('',(1.,0.,-0.)); +#18601 = DIRECTION('',(-0.,0.,-1.)); +#18602 = ADVANCED_FACE('',(#18603),#18629,.T.); +#18603 = FACE_BOUND('',#18604,.T.); +#18604 = EDGE_LOOP('',(#18605,#18606,#18607,#18623)); +#18605 = ORIENTED_EDGE('',*,*,#14065,.F.); +#18606 = ORIENTED_EDGE('',*,*,#18592,.F.); +#18607 = ORIENTED_EDGE('',*,*,#18608,.T.); +#18608 = EDGE_CURVE('',#18585,#18609,#18611,.T.); +#18609 = VERTEX_POINT('',#18610); +#18610 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18611 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18612,#18613,#18614,#18615, + #18616,#18617,#18618,#18619,#18620,#18621,#18622),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.125279696736,0.249419970742, + 0.373356799493,0.496681278782,0.620202915744,0.745086320161, + 0.871269195019,1.),.UNSPECIFIED.); +#18612 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.151)); +#18613 = CARTESIAN_POINT('',(0.157707901285,-9.272527436884E-03,0.151)); +#18614 = CARTESIAN_POINT('',(0.162127902253,-6.704173924513E-03,0.151)); +#18615 = CARTESIAN_POINT('',(0.169079760157,-3.493226567989E-03,0.151)); +#18616 = CARTESIAN_POINT('',(0.176165570944,-7.081920244666E-04,0.151)); +#18617 = CARTESIAN_POINT('',(0.183434938833,1.515058182954E-03,0.151)); +#18618 = CARTESIAN_POINT('',(0.190842112582,3.310349788266E-03,0.151)); +#18619 = CARTESIAN_POINT('',(0.198425933917,4.514502466469E-03,0.151)); +#18620 = CARTESIAN_POINT('',(0.206172034184,5.324660863734E-03,0.151)); +#18621 = CARTESIAN_POINT('',(0.211395885256,5.403641727138E-03,0.151)); +#18622 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18623 = ORIENTED_EDGE('',*,*,#18624,.T.); +#18624 = EDGE_CURVE('',#18609,#14066,#18625,.T.); +#18625 = LINE('',#18626,#18627); +#18626 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18627 = VECTOR('',#18628,1.); +#18628 = DIRECTION('',(-0.,-0.,-1.)); +#18629 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18630,#18631) + ,(#18632,#18633) + ,(#18634,#18635) + ,(#18636,#18637) + ,(#18638,#18639) + ,(#18640,#18641) + ,(#18642,#18643) + ,(#18644,#18645) + ,(#18646,#18647) + ,(#18648,#18649) + ,(#18650,#18651 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.125279696736,0.249419970742,0.373356799493,0.496681278782, + 0.620202915744,0.745086320161,0.871269195019,1.),(0.,1.), + .UNSPECIFIED.); +#18630 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.151)); +#18631 = CARTESIAN_POINT('',(0.155487804878,-1.056257068475E-02,0.15)); +#18632 = CARTESIAN_POINT('',(0.157707901285,-9.272527436884E-03,0.151)); +#18633 = CARTESIAN_POINT('',(0.157707901285,-9.272527436884E-03,0.15)); +#18634 = CARTESIAN_POINT('',(0.162127902253,-6.704173924513E-03,0.151)); +#18635 = CARTESIAN_POINT('',(0.162127902253,-6.704173924513E-03,0.15)); +#18636 = CARTESIAN_POINT('',(0.169079760157,-3.493226567989E-03,0.151)); +#18637 = CARTESIAN_POINT('',(0.169079760157,-3.493226567989E-03,0.15)); +#18638 = CARTESIAN_POINT('',(0.176165570944,-7.081920244666E-04,0.151)); +#18639 = CARTESIAN_POINT('',(0.176165570944,-7.081920244666E-04,0.15)); +#18640 = CARTESIAN_POINT('',(0.183434938833,1.515058182954E-03,0.151)); +#18641 = CARTESIAN_POINT('',(0.183434938833,1.515058182954E-03,0.15)); +#18642 = CARTESIAN_POINT('',(0.190842112582,3.310349788266E-03,0.151)); +#18643 = CARTESIAN_POINT('',(0.190842112582,3.310349788266E-03,0.15)); +#18644 = CARTESIAN_POINT('',(0.198425933917,4.514502466469E-03,0.151)); +#18645 = CARTESIAN_POINT('',(0.198425933917,4.514502466469E-03,0.15)); +#18646 = CARTESIAN_POINT('',(0.206172034184,5.324660863734E-03,0.151)); +#18647 = CARTESIAN_POINT('',(0.206172034184,5.324660863734E-03,0.15)); +#18648 = CARTESIAN_POINT('',(0.211395885256,5.403641727138E-03,0.151)); +#18649 = CARTESIAN_POINT('',(0.211395885256,5.403641727138E-03,0.15)); +#18650 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18651 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.15)); +#18652 = ADVANCED_FACE('',(#18653),#18687,.T.); +#18653 = FACE_BOUND('',#18654,.T.); +#18654 = EDGE_LOOP('',(#18655,#18656,#18657,#18681)); +#18655 = ORIENTED_EDGE('',*,*,#14081,.F.); +#18656 = ORIENTED_EDGE('',*,*,#18624,.F.); +#18657 = ORIENTED_EDGE('',*,*,#18658,.T.); +#18658 = EDGE_CURVE('',#18609,#18659,#18661,.T.); +#18659 = VERTEX_POINT('',#18660); +#18660 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18661 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18662,#18663,#18664,#18665, + #18666,#18667,#18668,#18669,#18670,#18671,#18672,#18673,#18674, + #18675,#18676,#18677,#18678,#18679,#18680),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.460397028839E-02, + 0.126702413963,0.186756814036,0.245505687365,0.30365202445, + 0.361503073971,0.420240222928,0.480033340777,0.540678134776, + 0.601191806381,0.662333502477,0.724739510297,0.789467736173, + 0.856504860044,0.926312095839,1.),.UNSPECIFIED.); +#18662 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18663 = CARTESIAN_POINT('',(0.217421258149,5.370692854728E-03,0.151)); +#18664 = CARTESIAN_POINT('',(0.224064568337,5.227849523261E-03,0.151)); +#18665 = CARTESIAN_POINT('',(0.233769937764,3.8253921019E-03,0.151)); +#18666 = CARTESIAN_POINT('',(0.24302678606,1.727157293832E-03,0.151)); +#18667 = CARTESIAN_POINT('',(0.25179799389,-1.343772025891E-03,0.151)); +#18668 = CARTESIAN_POINT('',(0.260073601506,-5.30727961219E-03,0.151)); +#18669 = CARTESIAN_POINT('',(0.267846432506,-1.017823144022E-02,0.151)); +#18670 = CARTESIAN_POINT('',(0.27516422277,-1.585219453385E-02,0.151)); +#18671 = CARTESIAN_POINT('',(0.281915341895,-2.239995384738E-02,0.151)); +#18672 = CARTESIAN_POINT('',(0.288067489339,-2.964072979152E-02,0.151)); +#18673 = CARTESIAN_POINT('',(0.293348196923,-3.762240745908E-02,0.151)); +#18674 = CARTESIAN_POINT('',(0.297927371978,-4.612895248102E-02,0.151)); +#18675 = CARTESIAN_POINT('',(0.301594366459,-5.530961003933E-02,0.151)); +#18676 = CARTESIAN_POINT('',(0.30443424127,-6.509394100662E-02,0.151)); +#18677 = CARTESIAN_POINT('',(0.306484032278,-7.546859467313E-02,0.151)); +#18678 = CARTESIAN_POINT('',(0.307671652948,-8.645270552792E-02,0.151)); +#18679 = CARTESIAN_POINT('',(0.307840250648,-9.397238941246E-02,0.151)); +#18680 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18681 = ORIENTED_EDGE('',*,*,#18682,.T.); +#18682 = EDGE_CURVE('',#18659,#14082,#18683,.T.); +#18683 = LINE('',#18684,#18685); +#18684 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18685 = VECTOR('',#18686,1.); +#18686 = DIRECTION('',(-0.,-0.,-1.)); +#18687 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18688,#18689) + ,(#18690,#18691) + ,(#18692,#18693) + ,(#18694,#18695) + ,(#18696,#18697) + ,(#18698,#18699) + ,(#18700,#18701) + ,(#18702,#18703) + ,(#18704,#18705) + ,(#18706,#18707) + ,(#18708,#18709) + ,(#18710,#18711) + ,(#18712,#18713) + ,(#18714,#18715) + ,(#18716,#18717) + ,(#18718,#18719) + ,(#18720,#18721) + ,(#18722,#18723) + ,(#18724,#18725 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.460397028839E-02,0.126702413963,0.186756814036, + 0.245505687365,0.30365202445,0.361503073971,0.420240222928, + 0.480033340777,0.540678134776,0.601191806381,0.662333502477, + 0.724739510297,0.789467736173,0.856504860044,0.926312095839,1.),(0., + 1.),.UNSPECIFIED.); +#18688 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.151)); +#18689 = CARTESIAN_POINT('',(0.214033917683,5.443526876222E-03,0.15)); +#18690 = CARTESIAN_POINT('',(0.217421258149,5.370692854728E-03,0.151)); +#18691 = CARTESIAN_POINT('',(0.217421258149,5.370692854728E-03,0.15)); +#18692 = CARTESIAN_POINT('',(0.224064568337,5.227849523261E-03,0.151)); +#18693 = CARTESIAN_POINT('',(0.224064568337,5.227849523261E-03,0.15)); +#18694 = CARTESIAN_POINT('',(0.233769937764,3.8253921019E-03,0.151)); +#18695 = CARTESIAN_POINT('',(0.233769937764,3.8253921019E-03,0.15)); +#18696 = CARTESIAN_POINT('',(0.24302678606,1.727157293832E-03,0.151)); +#18697 = CARTESIAN_POINT('',(0.24302678606,1.727157293832E-03,0.15)); +#18698 = CARTESIAN_POINT('',(0.25179799389,-1.343772025891E-03,0.151)); +#18699 = CARTESIAN_POINT('',(0.25179799389,-1.343772025891E-03,0.15)); +#18700 = CARTESIAN_POINT('',(0.260073601506,-5.30727961219E-03,0.151)); +#18701 = CARTESIAN_POINT('',(0.260073601506,-5.30727961219E-03,0.15)); +#18702 = CARTESIAN_POINT('',(0.267846432506,-1.017823144022E-02,0.151)); +#18703 = CARTESIAN_POINT('',(0.267846432506,-1.017823144022E-02,0.15)); +#18704 = CARTESIAN_POINT('',(0.27516422277,-1.585219453385E-02,0.151)); +#18705 = CARTESIAN_POINT('',(0.27516422277,-1.585219453385E-02,0.15)); +#18706 = CARTESIAN_POINT('',(0.281915341895,-2.239995384738E-02,0.151)); +#18707 = CARTESIAN_POINT('',(0.281915341895,-2.239995384738E-02,0.15)); +#18708 = CARTESIAN_POINT('',(0.288067489339,-2.964072979152E-02,0.151)); +#18709 = CARTESIAN_POINT('',(0.288067489339,-2.964072979152E-02,0.15)); +#18710 = CARTESIAN_POINT('',(0.293348196923,-3.762240745908E-02,0.151)); +#18711 = CARTESIAN_POINT('',(0.293348196923,-3.762240745908E-02,0.15)); +#18712 = CARTESIAN_POINT('',(0.297927371978,-4.612895248102E-02,0.151)); +#18713 = CARTESIAN_POINT('',(0.297927371978,-4.612895248102E-02,0.15)); +#18714 = CARTESIAN_POINT('',(0.301594366459,-5.530961003933E-02,0.151)); +#18715 = CARTESIAN_POINT('',(0.301594366459,-5.530961003933E-02,0.15)); +#18716 = CARTESIAN_POINT('',(0.30443424127,-6.509394100662E-02,0.151)); +#18717 = CARTESIAN_POINT('',(0.30443424127,-6.509394100662E-02,0.15)); +#18718 = CARTESIAN_POINT('',(0.306484032278,-7.546859467313E-02,0.151)); +#18719 = CARTESIAN_POINT('',(0.306484032278,-7.546859467313E-02,0.15)); +#18720 = CARTESIAN_POINT('',(0.307671652948,-8.645270552792E-02,0.151)); +#18721 = CARTESIAN_POINT('',(0.307671652948,-8.645270552792E-02,0.15)); +#18722 = CARTESIAN_POINT('',(0.307840250648,-9.397238941246E-02,0.151)); +#18723 = CARTESIAN_POINT('',(0.307840250648,-9.397238941246E-02,0.15)); +#18724 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18725 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.15)); +#18726 = ADVANCED_FACE('',(#18727),#18761,.T.); +#18727 = FACE_BOUND('',#18728,.T.); +#18728 = EDGE_LOOP('',(#18729,#18730,#18731,#18755)); +#18729 = ORIENTED_EDGE('',*,*,#14105,.F.); +#18730 = ORIENTED_EDGE('',*,*,#18682,.F.); +#18731 = ORIENTED_EDGE('',*,*,#18732,.T.); +#18732 = EDGE_CURVE('',#18659,#18733,#18735,.T.); +#18733 = VERTEX_POINT('',#18734); +#18734 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18735 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18736,#18737,#18738,#18739, + #18740,#18741,#18742,#18743,#18744,#18745,#18746,#18747,#18748, + #18749,#18750,#18751,#18752,#18753,#18754),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.377411937406E-02, + 0.144079114726,0.211348518309,0.27607688574,0.33852091582, + 0.399885116693,0.460254067465,0.520588964391,0.580207684563, + 0.638632908553,0.696364549491,0.75400177466,0.812805681374, + 0.872754425526,0.935181996978,1.),.UNSPECIFIED.); +#18736 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18737 = CARTESIAN_POINT('',(0.307857374306,-0.101489213572,0.151)); +#18738 = CARTESIAN_POINT('',(0.307721730402,-0.108627931021,0.151)); +#18739 = CARTESIAN_POINT('',(0.306556333747,-0.119047350501,0.151)); +#18740 = CARTESIAN_POINT('',(0.304668522686,-0.128899030962,0.151)); +#18741 = CARTESIAN_POINT('',(0.302015437261,-0.138174288757,0.151)); +#18742 = CARTESIAN_POINT('',(0.298555910964,-0.146864540276,0.151)); +#18743 = CARTESIAN_POINT('',(0.294376924443,-0.15499287549,0.151)); +#18744 = CARTESIAN_POINT('',(0.289380420004,-0.162522588398,0.151)); +#18745 = CARTESIAN_POINT('',(0.283676695055,-0.16941842821,0.151)); +#18746 = CARTESIAN_POINT('',(0.277344057966,-0.175602341238,0.151)); +#18747 = CARTESIAN_POINT('',(0.270515118482,-0.181033206318,0.151)); +#18748 = CARTESIAN_POINT('',(0.263174998447,-0.185566288026,0.151)); +#18749 = CARTESIAN_POINT('',(0.255392143278,-0.189325263246,0.151)); +#18750 = CARTESIAN_POINT('',(0.247131388515,-0.192231469545,0.151)); +#18751 = CARTESIAN_POINT('',(0.238377270937,-0.194268822081,0.151)); +#18752 = CARTESIAN_POINT('',(0.229171669416,-0.195530714408,0.151)); +#18753 = CARTESIAN_POINT('',(0.22286677546,-0.195693210798,0.151)); +#18754 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18755 = ORIENTED_EDGE('',*,*,#18756,.T.); +#18756 = EDGE_CURVE('',#18733,#14106,#18757,.T.); +#18757 = LINE('',#18758,#18759); +#18758 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18759 = VECTOR('',#18760,1.); +#18760 = DIRECTION('',(-0.,-0.,-1.)); +#18761 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18762,#18763) + ,(#18764,#18765) + ,(#18766,#18767) + ,(#18768,#18769) + ,(#18770,#18771) + ,(#18772,#18773) + ,(#18774,#18775) + ,(#18776,#18777) + ,(#18778,#18779) + ,(#18780,#18781) + ,(#18782,#18783) + ,(#18784,#18785) + ,(#18786,#18787) + ,(#18788,#18789) + ,(#18790,#18791) + ,(#18792,#18793) + ,(#18794,#18795) + ,(#18796,#18797) + ,(#18798,#18799 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.377411937406E-02,0.144079114726,0.211348518309, + 0.27607688574,0.33852091582,0.399885116693,0.460254067465, + 0.520588964391,0.580207684563,0.638632908553,0.696364549491, + 0.75400177466,0.812805681374,0.872754425526,0.935181996978,1.),(0., + 1.),.UNSPECIFIED.); +#18762 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.151)); +#18763 = CARTESIAN_POINT('',(0.307926829268,-9.783391214817E-02,0.15)); +#18764 = CARTESIAN_POINT('',(0.307857374306,-0.101489213572,0.151)); +#18765 = CARTESIAN_POINT('',(0.307857374306,-0.101489213572,0.15)); +#18766 = CARTESIAN_POINT('',(0.307721730402,-0.108627931021,0.151)); +#18767 = CARTESIAN_POINT('',(0.307721730402,-0.108627931021,0.15)); +#18768 = CARTESIAN_POINT('',(0.306556333747,-0.119047350501,0.151)); +#18769 = CARTESIAN_POINT('',(0.306556333747,-0.119047350501,0.15)); +#18770 = CARTESIAN_POINT('',(0.304668522686,-0.128899030962,0.151)); +#18771 = CARTESIAN_POINT('',(0.304668522686,-0.128899030962,0.15)); +#18772 = CARTESIAN_POINT('',(0.302015437261,-0.138174288757,0.151)); +#18773 = CARTESIAN_POINT('',(0.302015437261,-0.138174288757,0.15)); +#18774 = CARTESIAN_POINT('',(0.298555910964,-0.146864540276,0.151)); +#18775 = CARTESIAN_POINT('',(0.298555910964,-0.146864540276,0.15)); +#18776 = CARTESIAN_POINT('',(0.294376924443,-0.15499287549,0.151)); +#18777 = CARTESIAN_POINT('',(0.294376924443,-0.15499287549,0.15)); +#18778 = CARTESIAN_POINT('',(0.289380420004,-0.162522588398,0.151)); +#18779 = CARTESIAN_POINT('',(0.289380420004,-0.162522588398,0.15)); +#18780 = CARTESIAN_POINT('',(0.283676695055,-0.16941842821,0.151)); +#18781 = CARTESIAN_POINT('',(0.283676695055,-0.16941842821,0.15)); +#18782 = CARTESIAN_POINT('',(0.277344057966,-0.175602341238,0.151)); +#18783 = CARTESIAN_POINT('',(0.277344057966,-0.175602341238,0.15)); +#18784 = CARTESIAN_POINT('',(0.270515118482,-0.181033206318,0.151)); +#18785 = CARTESIAN_POINT('',(0.270515118482,-0.181033206318,0.15)); +#18786 = CARTESIAN_POINT('',(0.263174998447,-0.185566288026,0.151)); +#18787 = CARTESIAN_POINT('',(0.263174998447,-0.185566288026,0.15)); +#18788 = CARTESIAN_POINT('',(0.255392143278,-0.189325263246,0.151)); +#18789 = CARTESIAN_POINT('',(0.255392143278,-0.189325263246,0.15)); +#18790 = CARTESIAN_POINT('',(0.247131388515,-0.192231469545,0.151)); +#18791 = CARTESIAN_POINT('',(0.247131388515,-0.192231469545,0.15)); +#18792 = CARTESIAN_POINT('',(0.238377270937,-0.194268822081,0.151)); +#18793 = CARTESIAN_POINT('',(0.238377270937,-0.194268822081,0.15)); +#18794 = CARTESIAN_POINT('',(0.229171669416,-0.195530714408,0.151)); +#18795 = CARTESIAN_POINT('',(0.229171669416,-0.195530714408,0.15)); +#18796 = CARTESIAN_POINT('',(0.22286677546,-0.195693210798,0.151)); +#18797 = CARTESIAN_POINT('',(0.22286677546,-0.195693210798,0.15)); +#18798 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18799 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.15)); +#18800 = ADVANCED_FACE('',(#18801),#18820,.T.); +#18801 = FACE_BOUND('',#18802,.T.); +#18802 = EDGE_LOOP('',(#18803,#18804,#18805,#18819)); +#18803 = ORIENTED_EDGE('',*,*,#14129,.F.); +#18804 = ORIENTED_EDGE('',*,*,#18756,.F.); +#18805 = ORIENTED_EDGE('',*,*,#18806,.T.); +#18806 = EDGE_CURVE('',#18733,#18305,#18807,.T.); +#18807 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#18808,#18809,#18810,#18811, + #18812,#18813,#18814,#18815,#18816,#18817,#18818),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.135294604763,0.266765657925, + 0.394816018836,0.520051654434,0.642175702971,0.762651820558, + 0.881834004381,1.),.UNSPECIFIED.); +#18808 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18809 = CARTESIAN_POINT('',(0.216636251566,-0.195736350182,0.151)); +#18810 = CARTESIAN_POINT('',(0.210683856942,-0.195658200034,0.151)); +#18811 = CARTESIAN_POINT('',(0.201905886482,-0.194856206297,0.151)); +#18812 = CARTESIAN_POINT('',(0.193403329287,-0.193649151468,0.151)); +#18813 = CARTESIAN_POINT('',(0.185213141573,-0.191872472788,0.151)); +#18814 = CARTESIAN_POINT('',(0.177307243079,-0.189648472075,0.151)); +#18815 = CARTESIAN_POINT('',(0.169730454833,-0.186854956798,0.151)); +#18816 = CARTESIAN_POINT('',(0.162401815219,-0.183664184702,0.151)); +#18817 = CARTESIAN_POINT('',(0.15778588741,-0.181064276302,0.151)); +#18818 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18819 = ORIENTED_EDGE('',*,*,#18304,.T.); +#18820 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#18821,#18822) + ,(#18823,#18824) + ,(#18825,#18826) + ,(#18827,#18828) + ,(#18829,#18830) + ,(#18831,#18832) + ,(#18833,#18834) + ,(#18835,#18836) + ,(#18837,#18838) + ,(#18839,#18840) + ,(#18841,#18842 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.135294604763,0.266765657925,0.394816018836,0.520051654434, + 0.642175702971,0.762651820558,0.881834004381,1.),(0.,1.), + .UNSPECIFIED.); +#18821 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.151)); +#18822 = CARTESIAN_POINT('',(0.219655106707,-0.195775985319,0.15)); +#18823 = CARTESIAN_POINT('',(0.216636251566,-0.195736350182,0.151)); +#18824 = CARTESIAN_POINT('',(0.216636251566,-0.195736350182,0.15)); +#18825 = CARTESIAN_POINT('',(0.210683856942,-0.195658200034,0.151)); +#18826 = CARTESIAN_POINT('',(0.210683856942,-0.195658200034,0.15)); +#18827 = CARTESIAN_POINT('',(0.201905886482,-0.194856206297,0.151)); +#18828 = CARTESIAN_POINT('',(0.201905886482,-0.194856206297,0.15)); +#18829 = CARTESIAN_POINT('',(0.193403329287,-0.193649151468,0.151)); +#18830 = CARTESIAN_POINT('',(0.193403329287,-0.193649151468,0.15)); +#18831 = CARTESIAN_POINT('',(0.185213141573,-0.191872472788,0.151)); +#18832 = CARTESIAN_POINT('',(0.185213141573,-0.191872472788,0.15)); +#18833 = CARTESIAN_POINT('',(0.177307243079,-0.189648472075,0.151)); +#18834 = CARTESIAN_POINT('',(0.177307243079,-0.189648472075,0.15)); +#18835 = CARTESIAN_POINT('',(0.169730454833,-0.186854956798,0.151)); +#18836 = CARTESIAN_POINT('',(0.169730454833,-0.186854956798,0.15)); +#18837 = CARTESIAN_POINT('',(0.162401815219,-0.183664184702,0.151)); +#18838 = CARTESIAN_POINT('',(0.162401815219,-0.183664184702,0.15)); +#18839 = CARTESIAN_POINT('',(0.15778588741,-0.181064276302,0.151)); +#18840 = CARTESIAN_POINT('',(0.15778588741,-0.181064276302,0.15)); +#18841 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.151)); +#18842 = CARTESIAN_POINT('',(0.155487804878,-0.179769887758,0.15)); +#18843 = ADVANCED_FACE('',(#18844),#18856,.T.); +#18844 = FACE_BOUND('',#18845,.T.); +#18845 = EDGE_LOOP('',(#18846,#18847,#18848,#18849,#18850,#18851,#18852, + #18853,#18854,#18855)); +#18846 = ORIENTED_EDGE('',*,*,#18312,.F.); +#18847 = ORIENTED_EDGE('',*,*,#18806,.F.); +#18848 = ORIENTED_EDGE('',*,*,#18732,.F.); +#18849 = ORIENTED_EDGE('',*,*,#18658,.F.); +#18850 = ORIENTED_EDGE('',*,*,#18608,.F.); +#18851 = ORIENTED_EDGE('',*,*,#18584,.F.); +#18852 = ORIENTED_EDGE('',*,*,#18534,.F.); +#18853 = ORIENTED_EDGE('',*,*,#18460,.F.); +#18854 = ORIENTED_EDGE('',*,*,#18386,.F.); +#18855 = ORIENTED_EDGE('',*,*,#18336,.F.); +#18856 = PLANE('',#18857); +#18857 = AXIS2_PLACEMENT_3D('',#18858,#18859,#18860); +#18858 = CARTESIAN_POINT('',(0.188784815775,-0.219746843098,0.151)); +#18859 = DIRECTION('',(-1.570097583998E-14,-2.844589491632E-14,-1.)); +#18860 = DIRECTION('',(-4.115371281435E-44,1.,-2.844589491632E-14)); +#18861 = ADVANCED_FACE('',(#18862),#18887,.T.); +#18862 = FACE_BOUND('',#18863,.T.); +#18863 = EDGE_LOOP('',(#18864,#18865,#18873,#18881)); +#18864 = ORIENTED_EDGE('',*,*,#14561,.F.); +#18865 = ORIENTED_EDGE('',*,*,#18866,.F.); +#18866 = EDGE_CURVE('',#18867,#14562,#18869,.T.); +#18867 = VERTEX_POINT('',#18868); +#18868 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.151)); +#18869 = LINE('',#18870,#18871); +#18870 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.151)); +#18871 = VECTOR('',#18872,1.); +#18872 = DIRECTION('',(-0.,-0.,-1.)); +#18873 = ORIENTED_EDGE('',*,*,#18874,.T.); +#18874 = EDGE_CURVE('',#18867,#18875,#18877,.T.); +#18875 = VERTEX_POINT('',#18876); +#18876 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.151)); +#18877 = LINE('',#18878,#18879); +#18878 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.151)); +#18879 = VECTOR('',#18880,1.); +#18880 = DIRECTION('',(0.,-1.,0.)); +#18881 = ORIENTED_EDGE('',*,*,#18882,.T.); +#18882 = EDGE_CURVE('',#18875,#14564,#18883,.T.); +#18883 = LINE('',#18884,#18885); +#18884 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.151)); +#18885 = VECTOR('',#18886,1.); +#18886 = DIRECTION('',(-0.,-0.,-1.)); +#18887 = PLANE('',#18888); +#18888 = AXIS2_PLACEMENT_3D('',#18889,#18890,#18891); +#18889 = CARTESIAN_POINT('',(0.362804878049,-0.192727204831,0.151)); +#18890 = DIRECTION('',(1.,0.,-0.)); +#18891 = DIRECTION('',(-0.,0.,-1.)); +#18892 = ADVANCED_FACE('',(#18893),#18911,.T.); +#18893 = FACE_BOUND('',#18894,.T.); +#18894 = EDGE_LOOP('',(#18895,#18896,#18897,#18905)); +#18895 = ORIENTED_EDGE('',*,*,#14571,.F.); +#18896 = ORIENTED_EDGE('',*,*,#18882,.F.); +#18897 = ORIENTED_EDGE('',*,*,#18898,.T.); +#18898 = EDGE_CURVE('',#18875,#18899,#18901,.T.); +#18899 = VERTEX_POINT('',#18900); +#18900 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.151)); +#18901 = LINE('',#18902,#18903); +#18902 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.151)); +#18903 = VECTOR('',#18904,1.); +#18904 = DIRECTION('',(1.,0.,0.)); +#18905 = ORIENTED_EDGE('',*,*,#18906,.T.); +#18906 = EDGE_CURVE('',#18899,#14572,#18907,.T.); +#18907 = LINE('',#18908,#18909); +#18908 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.151)); +#18909 = VECTOR('',#18910,1.); +#18910 = DIRECTION('',(-0.,-0.,-1.)); +#18911 = PLANE('',#18912); +#18912 = AXIS2_PLACEMENT_3D('',#18913,#18914,#18915); +#18913 = CARTESIAN_POINT('',(0.362804878049,-0.220166229221,0.151)); +#18914 = DIRECTION('',(0.,1.,0.)); +#18915 = DIRECTION('',(0.,-0.,1.)); +#18916 = ADVANCED_FACE('',(#18917),#18935,.T.); +#18917 = FACE_BOUND('',#18918,.T.); +#18918 = EDGE_LOOP('',(#18919,#18920,#18921,#18929)); +#18919 = ORIENTED_EDGE('',*,*,#14579,.F.); +#18920 = ORIENTED_EDGE('',*,*,#18906,.F.); +#18921 = ORIENTED_EDGE('',*,*,#18922,.T.); +#18922 = EDGE_CURVE('',#18899,#18923,#18925,.T.); +#18923 = VERTEX_POINT('',#18924); +#18924 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.151)); +#18925 = LINE('',#18926,#18927); +#18926 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.151)); +#18927 = VECTOR('',#18928,1.); +#18928 = DIRECTION('',(0.,1.,0.)); +#18929 = ORIENTED_EDGE('',*,*,#18930,.T.); +#18930 = EDGE_CURVE('',#18923,#14580,#18931,.T.); +#18931 = LINE('',#18932,#18933); +#18932 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.151)); +#18933 = VECTOR('',#18934,1.); +#18934 = DIRECTION('',(-0.,-0.,-1.)); +#18935 = PLANE('',#18936); +#18936 = AXIS2_PLACEMENT_3D('',#18937,#18938,#18939); +#18937 = CARTESIAN_POINT('',(0.490853658537,-0.220166229221,0.151)); +#18938 = DIRECTION('',(-1.,0.,0.)); +#18939 = DIRECTION('',(0.,0.,1.)); +#18940 = ADVANCED_FACE('',(#18941),#18959,.T.); +#18941 = FACE_BOUND('',#18942,.T.); +#18942 = EDGE_LOOP('',(#18943,#18944,#18945,#18953)); +#18943 = ORIENTED_EDGE('',*,*,#14587,.F.); +#18944 = ORIENTED_EDGE('',*,*,#18930,.F.); +#18945 = ORIENTED_EDGE('',*,*,#18946,.T.); +#18946 = EDGE_CURVE('',#18923,#18947,#18949,.T.); +#18947 = VERTEX_POINT('',#18948); +#18948 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.151)); +#18949 = LINE('',#18950,#18951); +#18950 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.151)); +#18951 = VECTOR('',#18952,1.); +#18952 = DIRECTION('',(-1.,0.,0.)); +#18953 = ORIENTED_EDGE('',*,*,#18954,.T.); +#18954 = EDGE_CURVE('',#18947,#14588,#18955,.T.); +#18955 = LINE('',#18956,#18957); +#18956 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.151)); +#18957 = VECTOR('',#18958,1.); +#18958 = DIRECTION('',(-0.,-0.,-1.)); +#18959 = PLANE('',#18960); +#18960 = AXIS2_PLACEMENT_3D('',#18961,#18962,#18963); +#18961 = CARTESIAN_POINT('',(0.490853658537,2.983377077866E-02,0.151)); +#18962 = DIRECTION('',(0.,-1.,0.)); +#18963 = DIRECTION('',(0.,-0.,-1.)); +#18964 = ADVANCED_FACE('',(#18965),#18983,.T.); +#18965 = FACE_BOUND('',#18966,.T.); +#18966 = EDGE_LOOP('',(#18967,#18968,#18969,#18977)); +#18967 = ORIENTED_EDGE('',*,*,#14595,.F.); +#18968 = ORIENTED_EDGE('',*,*,#18954,.F.); +#18969 = ORIENTED_EDGE('',*,*,#18970,.T.); +#18970 = EDGE_CURVE('',#18947,#18971,#18973,.T.); +#18971 = VERTEX_POINT('',#18972); +#18972 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.151)); +#18973 = LINE('',#18974,#18975); +#18974 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.151)); +#18975 = VECTOR('',#18976,1.); +#18976 = DIRECTION('',(0.,-1.,0.)); +#18977 = ORIENTED_EDGE('',*,*,#18978,.T.); +#18978 = EDGE_CURVE('',#18971,#14596,#18979,.T.); +#18979 = LINE('',#18980,#18981); +#18980 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.151)); +#18981 = VECTOR('',#18982,1.); +#18982 = DIRECTION('',(-0.,-0.,-1.)); +#18983 = PLANE('',#18984); +#18984 = AXIS2_PLACEMENT_3D('',#18985,#18986,#18987); +#18985 = CARTESIAN_POINT('',(0.457317073171,2.983377077866E-02,0.151)); +#18986 = DIRECTION('',(1.,0.,-0.)); +#18987 = DIRECTION('',(-0.,0.,-1.)); +#18988 = ADVANCED_FACE('',(#18989),#19000,.T.); +#18989 = FACE_BOUND('',#18990,.T.); +#18990 = EDGE_LOOP('',(#18991,#18992,#18993,#18999)); +#18991 = ORIENTED_EDGE('',*,*,#14603,.F.); +#18992 = ORIENTED_EDGE('',*,*,#18978,.F.); +#18993 = ORIENTED_EDGE('',*,*,#18994,.T.); +#18994 = EDGE_CURVE('',#18971,#18867,#18995,.T.); +#18995 = LINE('',#18996,#18997); +#18996 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.151)); +#18997 = VECTOR('',#18998,1.); +#18998 = DIRECTION('',(-1.,0.,0.)); +#18999 = ORIENTED_EDGE('',*,*,#18866,.T.); +#19000 = PLANE('',#19001); +#19001 = AXIS2_PLACEMENT_3D('',#19002,#19003,#19004); +#19002 = CARTESIAN_POINT('',(0.457317073171,-0.192727204831,0.151)); +#19003 = DIRECTION('',(0.,-1.,0.)); +#19004 = DIRECTION('',(0.,-0.,-1.)); +#19005 = ADVANCED_FACE('',(#19006),#19014,.F.); +#19006 = FACE_BOUND('',#19007,.T.); +#19007 = EDGE_LOOP('',(#19008,#19009,#19010,#19011,#19012,#19013)); +#19008 = ORIENTED_EDGE('',*,*,#18874,.F.); +#19009 = ORIENTED_EDGE('',*,*,#18994,.F.); +#19010 = ORIENTED_EDGE('',*,*,#18970,.F.); +#19011 = ORIENTED_EDGE('',*,*,#18946,.F.); +#19012 = ORIENTED_EDGE('',*,*,#18922,.F.); +#19013 = ORIENTED_EDGE('',*,*,#18898,.F.); +#19014 = PLANE('',#19015); +#19015 = AXIS2_PLACEMENT_3D('',#19016,#19017,#19018); +#19016 = CARTESIAN_POINT('',(0.,0.,0.151)); +#19017 = DIRECTION('',(-0.,0.,1.)); +#19018 = DIRECTION('',(1.,0.,0.)); +#19019 = ADVANCED_FACE('',(#19020),#19028,.F.); +#19020 = FACE_BOUND('',#19021,.T.); +#19021 = EDGE_LOOP('',(#19022,#19023,#19024,#19025,#19026,#19027)); +#19022 = ORIENTED_EDGE('',*,*,#17296,.T.); +#19023 = ORIENTED_EDGE('',*,*,#17451,.T.); +#19024 = ORIENTED_EDGE('',*,*,#17413,.T.); +#19025 = ORIENTED_EDGE('',*,*,#17389,.T.); +#19026 = ORIENTED_EDGE('',*,*,#17351,.T.); +#19027 = ORIENTED_EDGE('',*,*,#17327,.T.); +#19028 = PLANE('',#19029); +#19029 = AXIS2_PLACEMENT_3D('',#19030,#19031,#19032); +#19030 = CARTESIAN_POINT('',(0.,0.,0.15)); +#19031 = DIRECTION('',(-0.,0.,1.)); +#19032 = DIRECTION('',(1.,0.,0.)); +#19033 = ADVANCED_FACE('',(#19034),#19041,.F.); +#19034 = FACE_BOUND('',#19035,.T.); +#19035 = EDGE_LOOP('',(#19036,#19037,#19038,#19039,#19040)); +#19036 = ORIENTED_EDGE('',*,*,#17775,.T.); +#19037 = ORIENTED_EDGE('',*,*,#17978,.T.); +#19038 = ORIENTED_EDGE('',*,*,#17954,.T.); +#19039 = ORIENTED_EDGE('',*,*,#17880,.T.); +#19040 = ORIENTED_EDGE('',*,*,#17806,.T.); +#19041 = PLANE('',#19042); +#19042 = AXIS2_PLACEMENT_3D('',#19043,#19044,#19045); +#19043 = CARTESIAN_POINT('',(0.,0.,0.15)); +#19044 = DIRECTION('',(-0.,0.,1.)); +#19045 = DIRECTION('',(1.,0.,0.)); +#19046 = ADVANCED_FACE('',(#19047),#19059,.T.); +#19047 = FACE_BOUND('',#19048,.T.); +#19048 = EDGE_LOOP('',(#19049,#19050,#19057,#19058)); +#19049 = ORIENTED_EDGE('',*,*,#13728,.F.); +#19050 = ORIENTED_EDGE('',*,*,#19051,.T.); +#19051 = EDGE_CURVE('',#13596,#13594,#19052,.T.); +#19052 = CIRCLE('',#19053,0.25); +#19053 = AXIS2_PLACEMENT_3D('',#19054,#19055,#19056); +#19054 = CARTESIAN_POINT('',(-1.59,-1.2,2.85)); +#19055 = DIRECTION('',(-0.,1.,0.)); +#19056 = DIRECTION('',(0.,0.,-1.)); +#19057 = ORIENTED_EDGE('',*,*,#13745,.T.); +#19058 = ORIENTED_EDGE('',*,*,#15770,.T.); +#19059 = CYLINDRICAL_SURFACE('',#19060,0.25); +#19060 = AXIS2_PLACEMENT_3D('',#19061,#19062,#19063); +#19061 = CARTESIAN_POINT('',(-1.59,-1.35,2.85)); +#19062 = DIRECTION('',(-0.,1.,-0.)); +#19063 = DIRECTION('',(0.,0.,1.)); +#19064 = ADVANCED_FACE('',(#19065),#19075,.T.); +#19065 = FACE_BOUND('',#19066,.T.); +#19066 = EDGE_LOOP('',(#19067,#19068)); +#19067 = ORIENTED_EDGE('',*,*,#13613,.T.); +#19068 = ORIENTED_EDGE('',*,*,#19069,.T.); +#19069 = EDGE_CURVE('',#13605,#13614,#19070,.T.); +#19070 = CIRCLE('',#19071,1.E-01); +#19071 = AXIS2_PLACEMENT_3D('',#19072,#19073,#19074); +#19072 = CARTESIAN_POINT('',(-1.59,-1.35,2.85)); +#19073 = DIRECTION('',(0.,-1.,0.)); +#19074 = DIRECTION('',(0.,0.,-1.)); +#19075 = PLANE('',#19076); +#19076 = AXIS2_PLACEMENT_3D('',#19077,#19078,#19079); +#19077 = CARTESIAN_POINT('',(-1.59,-1.35,2.85)); +#19078 = DIRECTION('',(0.,-1.,0.)); +#19079 = DIRECTION('',(0.,-0.,-1.)); +#19080 = ADVANCED_FACE('',(#19081),#19093,.T.); +#19081 = FACE_BOUND('',#19082,.T.); +#19082 = EDGE_LOOP('',(#19083,#19084,#19091,#19092)); +#19083 = ORIENTED_EDGE('',*,*,#13696,.F.); +#19084 = ORIENTED_EDGE('',*,*,#19085,.T.); +#19085 = EDGE_CURVE('',#13647,#13645,#19086,.T.); +#19086 = CIRCLE('',#19087,0.25); +#19087 = AXIS2_PLACEMENT_3D('',#19088,#19089,#19090); +#19088 = CARTESIAN_POINT('',(1.59,-1.2,2.85)); +#19089 = DIRECTION('',(-0.,1.,0.)); +#19090 = DIRECTION('',(0.,0.,-1.)); +#19091 = ORIENTED_EDGE('',*,*,#13713,.T.); +#19092 = ORIENTED_EDGE('',*,*,#15760,.T.); +#19093 = CYLINDRICAL_SURFACE('',#19094,0.25); +#19094 = AXIS2_PLACEMENT_3D('',#19095,#19096,#19097); +#19095 = CARTESIAN_POINT('',(1.59,-1.35,2.85)); +#19096 = DIRECTION('',(-0.,1.,-0.)); +#19097 = DIRECTION('',(0.,0.,1.)); +#19098 = ADVANCED_FACE('',(#19099),#19109,.T.); +#19099 = FACE_BOUND('',#19100,.T.); +#19100 = EDGE_LOOP('',(#19101,#19102)); +#19101 = ORIENTED_EDGE('',*,*,#13664,.T.); +#19102 = ORIENTED_EDGE('',*,*,#19103,.T.); +#19103 = EDGE_CURVE('',#13656,#13665,#19104,.T.); +#19104 = CIRCLE('',#19105,1.E-01); +#19105 = AXIS2_PLACEMENT_3D('',#19106,#19107,#19108); +#19106 = CARTESIAN_POINT('',(1.59,-1.35,2.85)); +#19107 = DIRECTION('',(0.,-1.,0.)); +#19108 = DIRECTION('',(0.,0.,-1.)); +#19109 = PLANE('',#19110); +#19110 = AXIS2_PLACEMENT_3D('',#19111,#19112,#19113); +#19111 = CARTESIAN_POINT('',(1.59,-1.35,2.85)); +#19112 = DIRECTION('',(0.,-1.,0.)); +#19113 = DIRECTION('',(0.,-0.,-1.)); +#19114 = ADVANCED_FACE('',(#19115),#19121,.T.); +#19115 = FACE_BOUND('',#19116,.T.); +#19116 = EDGE_LOOP('',(#19117,#19118,#19119,#19120)); +#19117 = ORIENTED_EDGE('',*,*,#13655,.F.); +#19118 = ORIENTED_EDGE('',*,*,#19085,.F.); +#19119 = ORIENTED_EDGE('',*,*,#13673,.T.); +#19120 = ORIENTED_EDGE('',*,*,#19103,.F.); +#19121 = SURFACE_OF_REVOLUTION('',#19122,#19130); +#19122 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#19123,#19124,#19125,#19126, + #19127,#19128,#19129),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#19123 = CARTESIAN_POINT('',(1.59,-1.2,2.6)); +#19124 = CARTESIAN_POINT('',(1.59,-1.23926990817,2.6)); +#19125 = CARTESIAN_POINT('',(1.59,-1.278536475106,2.612334152903)); +#19126 = CARTESIAN_POINT('',(1.59,-1.312978522446,2.637021477554)); +#19127 = CARTESIAN_POINT('',(1.59,-1.337665847097,2.671463524894)); +#19128 = CARTESIAN_POINT('',(1.59,-1.35,2.71073009183)); +#19129 = CARTESIAN_POINT('',(1.59,-1.35,2.75)); +#19130 = AXIS1_PLACEMENT('',#19131,#19132); +#19131 = CARTESIAN_POINT('',(1.59,-1.2,2.85)); +#19132 = DIRECTION('',(0.,-1.,0.)); +#19133 = ADVANCED_FACE('',(#19134),#19140,.T.); +#19134 = FACE_BOUND('',#19135,.T.); +#19135 = EDGE_LOOP('',(#19136,#19137,#19138,#19139)); +#19136 = ORIENTED_EDGE('',*,*,#13604,.F.); +#19137 = ORIENTED_EDGE('',*,*,#19051,.F.); +#19138 = ORIENTED_EDGE('',*,*,#13622,.T.); +#19139 = ORIENTED_EDGE('',*,*,#19069,.F.); +#19140 = SURFACE_OF_REVOLUTION('',#19141,#19149); +#19141 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#19142,#19143,#19144,#19145, + #19146,#19147,#19148),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#19142 = CARTESIAN_POINT('',(-1.59,-1.2,2.6)); +#19143 = CARTESIAN_POINT('',(-1.59,-1.23926990817,2.6)); +#19144 = CARTESIAN_POINT('',(-1.59,-1.278536475106,2.612334152903)); +#19145 = CARTESIAN_POINT('',(-1.59,-1.312978522446,2.637021477554)); +#19146 = CARTESIAN_POINT('',(-1.59,-1.337665847097,2.671463524894)); +#19147 = CARTESIAN_POINT('',(-1.59,-1.35,2.71073009183)); +#19148 = CARTESIAN_POINT('',(-1.59,-1.35,2.75)); +#19149 = AXIS1_PLACEMENT('',#19150,#19151); +#19150 = CARTESIAN_POINT('',(-1.59,-1.2,2.85)); +#19151 = DIRECTION('',(0.,-1.,0.)); +#19152 = MANIFOLD_SOLID_BREP('',#19153); +#19153 = CLOSED_SHELL('',(#19154,#19196,#20838,#21192,#21546,#21568, + #21585,#21769,#21791,#21813,#21835,#21857,#21879,#21901,#21923, + #21945,#21967,#21984,#22001,#22023,#22045,#22067,#22089,#22111, + #22133,#22155,#22177,#22194,#22206,#22248,#22290,#22332,#22374, + #22386,#22398,#22410,#22422,#22434,#22446,#22458,#22470,#22482, + #22494,#22506,#22518,#22530,#22542,#22554,#22566,#22597,#22628, + #22659,#22690,#22721,#22763,#22830,#22872,#22903,#22934,#23039, + #23079,#23128,#23159,#23199,#23232,#23257,#23282,#23299,#23321, + #23343,#23360,#23377,#23396,#23415,#23437,#23477,#23526,#23557, + #23597,#23630,#23655,#23680,#23697,#23719,#23741,#23758,#23775, + #23794,#23813,#23835,#23847,#23859,#23871,#23883,#23895,#23909, + #23921,#23938,#23950,#23964,#23976,#23988,#24019,#24050,#24092, + #24159,#24201,#24232,#24263,#24294,#24325,#24356,#24461,#24501, + #24550,#24581,#24621,#24654,#24679,#24704,#24721,#24743,#24765, + #24782,#24799,#24818,#24837,#24859,#24899,#24948,#24979,#25019, + #25052,#25077,#25102,#25119,#25141,#25163,#25180,#25197,#25216, + #25235,#25257,#25269,#25281,#25293,#25305,#25317,#25331,#25343, + #25360,#25372,#25386,#25398,#25410,#25421,#25432,#25443,#25454, + #25466,#25478,#25509,#25533,#25557,#25581,#25605,#25622,#25636, + #25672,#25696,#25725,#25754,#25783,#25812,#25841,#25870,#25894, + #25923,#25952,#25981,#26010,#26032,#26054,#26085,#26109,#26133, + #26157,#26181,#26205,#26229,#26253,#26277,#26301,#26325,#26342, + #26362,#26492,#26514,#26535,#26556,#26577,#26598,#26615,#26627, + #26658,#26682,#26706,#26735,#26764,#26793,#26815,#26830,#26954, + #26976,#26993,#27010,#27027,#27044,#27061,#27078,#27090,#27121, + #27145,#27174,#27198,#27227,#27244,#27258,#27289,#27313,#27337, + #27361,#27385,#27409,#27433,#27457,#27481,#27505,#27529,#27546, + #27566,#27766,#27792,#27809,#27830,#27851,#27868,#27889,#27910, + #27931,#27952,#27969,#27986,#28003,#28020,#28036,#28072,#28101, + #28130,#28159,#28188,#28217,#28241,#28258,#28274,#28310,#28334, + #28363,#28392,#28421,#28450,#28479,#28508,#28537,#28566,#28595, + #28624,#28648,#28677,#28706,#28735,#28764,#28793,#28822,#28851, + #28873,#28902,#28933,#28957,#28986,#29010,#29034,#29058,#29082, + #29106,#29130,#29159,#29188,#29212,#29241,#29270,#29287,#29310, + #29341,#29365,#29389,#29413,#29437,#29461,#29485,#29509,#29533, + #29557,#29581,#29598,#29618,#29748,#29770,#29791,#29812,#29833, + #29854,#29871,#29883,#29914,#29938,#29962,#29991,#30020,#30049, + #30071,#30086,#30210,#30232,#30249,#30266,#30283,#30300,#30317, + #30334,#30346,#30377,#30401,#30430,#30454,#30483,#30500,#30514, + #30839,#30865,#30886,#30907,#30928,#30949,#30970,#30991,#31012, + #31033,#31054,#31075,#31096,#31113,#31130,#31147,#31164,#31185, + #31206,#31227,#31248,#31269,#31290,#31311,#31328,#31349,#31370, + #31387,#31408,#31429,#31450,#31467,#31488,#31504,#31549,#31577)); +#19154 = ADVANCED_FACE('',(#19155),#19191,.F.); +#19155 = FACE_BOUND('',#19156,.F.); +#19156 = EDGE_LOOP('',(#19157,#19167,#19176,#19184)); +#19157 = ORIENTED_EDGE('',*,*,#19158,.T.); +#19158 = EDGE_CURVE('',#19159,#19161,#19163,.T.); +#19159 = VERTEX_POINT('',#19160); +#19160 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,2.85)); +#19161 = VERTEX_POINT('',#19162); +#19162 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,2.85)); +#19163 = LINE('',#19164,#19165); +#19164 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,2.85)); +#19165 = VECTOR('',#19166,1.); +#19166 = DIRECTION('',(-0.,1.,-0.)); +#19167 = ORIENTED_EDGE('',*,*,#19168,.T.); +#19168 = EDGE_CURVE('',#19161,#19169,#19171,.T.); +#19169 = VERTEX_POINT('',#19170); +#19170 = CARTESIAN_POINT('',(-2.98969721088E-16,-1.05,0.65)); +#19171 = CIRCLE('',#19172,1.1); +#19172 = AXIS2_PLACEMENT_3D('',#19173,#19174,#19175); +#19173 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#19174 = DIRECTION('',(0.,-1.,0.)); +#19175 = DIRECTION('',(0.,0.,-1.)); +#19176 = ORIENTED_EDGE('',*,*,#19177,.F.); +#19177 = EDGE_CURVE('',#19178,#19169,#19180,.T.); +#19178 = VERTEX_POINT('',#19179); +#19179 = CARTESIAN_POINT('',(-2.98969721088E-16,-1.2,0.65)); +#19180 = LINE('',#19181,#19182); +#19181 = CARTESIAN_POINT('',(-2.98969721088E-16,-1.2,0.65)); +#19182 = VECTOR('',#19183,1.); +#19183 = DIRECTION('',(-0.,1.,-0.)); +#19184 = ORIENTED_EDGE('',*,*,#19185,.F.); +#19185 = EDGE_CURVE('',#19159,#19178,#19186,.T.); +#19186 = CIRCLE('',#19187,1.1); +#19187 = AXIS2_PLACEMENT_3D('',#19188,#19189,#19190); +#19188 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,1.75)); +#19189 = DIRECTION('',(0.,-1.,0.)); +#19190 = DIRECTION('',(0.,0.,-1.)); +#19191 = CYLINDRICAL_SURFACE('',#19192,1.1); +#19192 = AXIS2_PLACEMENT_3D('',#19193,#19194,#19195); +#19193 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,1.75)); +#19194 = DIRECTION('',(-0.,1.,-0.)); +#19195 = DIRECTION('',(0.,0.,1.)); +#19196 = ADVANCED_FACE('',(#19197,#19324,#19446,#19544,#19670,#19848, + #19898,#19996,#20058,#20124,#20313,#20411,#20473,#20539),#20833,.F. + ); +#19197 = FACE_BOUND('',#19198,.T.); +#19198 = EDGE_LOOP('',(#19199,#19209,#19217,#19226,#19235,#19243,#19252, + #19261,#19269,#19277,#19285,#19293,#19301,#19309,#19318)); +#19199 = ORIENTED_EDGE('',*,*,#19200,.F.); +#19200 = EDGE_CURVE('',#19201,#19203,#19205,.T.); +#19201 = VERTEX_POINT('',#19202); +#19202 = CARTESIAN_POINT('',(2.24,4.279063119782E-03,1.68056198295)); +#19203 = VERTEX_POINT('',#19204); +#19204 = CARTESIAN_POINT('',(2.24,-8.925862416953E-03,1.68056198295)); +#19205 = LINE('',#19206,#19207); +#19206 = CARTESIAN_POINT('',(2.24,-8.925862416954E-03,1.68056198295)); +#19207 = VECTOR('',#19208,1.); +#19208 = DIRECTION('',(-0.,-1.,-1.642117813492E-14)); +#19209 = ORIENTED_EDGE('',*,*,#19210,.F.); +#19210 = EDGE_CURVE('',#19211,#19201,#19213,.T.); +#19211 = VERTEX_POINT('',#19212); +#19212 = CARTESIAN_POINT('',(2.24,-2.868126282734E-02,1.596965446479)); +#19213 = LINE('',#19214,#19215); +#19214 = CARTESIAN_POINT('',(2.24,4.279063119782E-03,1.68056198295)); +#19215 = VECTOR('',#19216,1.); +#19216 = DIRECTION('',(-0.,0.366797678951,0.930300737781)); +#19217 = ORIENTED_EDGE('',*,*,#19218,.F.); +#19218 = EDGE_CURVE('',#19219,#19211,#19221,.T.); +#19219 = VERTEX_POINT('',#19220); +#19220 = CARTESIAN_POINT('',(2.24,-5.459722889146E-02,1.573726857049)); +#19221 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19222,#19223,#19224,#19225), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#19222 = CARTESIAN_POINT('',(2.24,-5.459722889146E-02,1.573726857049)); +#19223 = CARTESIAN_POINT('',(2.24,-4.344582523919E-02,1.573726857049)); +#19224 = CARTESIAN_POINT('',(2.24,-3.481583453354E-02,1.581473053525)); +#19225 = CARTESIAN_POINT('',(2.24,-2.868126282734E-02,1.596965446479)); +#19226 = ORIENTED_EDGE('',*,*,#19227,.F.); +#19227 = EDGE_CURVE('',#19228,#19219,#19230,.T.); +#19228 = VERTEX_POINT('',#19229); +#19229 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.574766614965)); +#19230 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19231,#19232,#19233,#19234), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#19231 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.574766614965)); +#19232 = CARTESIAN_POINT('',(2.24,-6.054984296252E-02,1.57409077232)); +#19233 = CARTESIAN_POINT('',(2.24,-5.77944844843E-02,1.573726857049)); +#19234 = CARTESIAN_POINT('',(2.24,-5.459722889146E-02,1.573726857049)); +#19235 = ORIENTED_EDGE('',*,*,#19236,.F.); +#19236 = EDGE_CURVE('',#19237,#19228,#19239,.T.); +#19237 = VERTEX_POINT('',#19238); +#19238 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.586099976253)); +#19239 = LINE('',#19240,#19241); +#19240 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.574766614965)); +#19241 = VECTOR('',#19242,1.); +#19242 = DIRECTION('',(-0.,-0.,-1.)); +#19243 = ORIENTED_EDGE('',*,*,#19244,.F.); +#19244 = EDGE_CURVE('',#19245,#19237,#19247,.T.); +#19245 = VERTEX_POINT('',#19246); +#19246 = CARTESIAN_POINT('',(2.24,-5.558499891222E-02,1.58464431517)); +#19247 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19248,#19249,#19250,#19251), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#19248 = CARTESIAN_POINT('',(2.24,-5.558499891222E-02,1.58464431517)); +#19249 = CARTESIAN_POINT('',(2.24,-5.792445422369E-02,1.58464431517)); +#19250 = CARTESIAN_POINT('',(2.24,-6.031589743127E-02,1.585112206232)); +#19251 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.586099976253)); +#19252 = ORIENTED_EDGE('',*,*,#19253,.F.); +#19253 = EDGE_CURVE('',#19254,#19245,#19256,.T.); +#19254 = VERTEX_POINT('',#19255); +#19255 = CARTESIAN_POINT('',(2.24,-4.253603706241E-02,1.594885930646)); +#19256 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19257,#19258,#19259,#19260), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#19257 = CARTESIAN_POINT('',(2.24,-4.253603706241E-02,1.594885930646)); +#19258 = CARTESIAN_POINT('',(2.24,-4.542136528002E-02,1.588023528398)); +#19259 = CARTESIAN_POINT('',(2.24,-4.976235458055E-02,1.58464431517)); +#19260 = CARTESIAN_POINT('',(2.24,-5.558499891222E-02,1.58464431517)); +#19261 = ORIENTED_EDGE('',*,*,#19262,.F.); +#19262 = EDGE_CURVE('',#19263,#19254,#19265,.T.); +#19263 = VERTEX_POINT('',#19264); +#19264 = CARTESIAN_POINT('',(2.24,-3.694733826199E-02,1.608090856183)); +#19265 = LINE('',#19266,#19267); +#19266 = CARTESIAN_POINT('',(2.24,-4.253603706241E-02,1.594885930646)); +#19267 = VECTOR('',#19268,1.); +#19268 = DIRECTION('',(-0.,-0.389758265065,-0.920917203017)); +#19269 = ORIENTED_EDGE('',*,*,#19270,.F.); +#19270 = EDGE_CURVE('',#19271,#19263,#19273,.T.); +#19271 = VERTEX_POINT('',#19272); +#19272 = CARTESIAN_POINT('',(2.24,-6.543670516919E-02,1.68056198295)); +#19273 = LINE('',#19274,#19275); +#19274 = CARTESIAN_POINT('',(2.24,-3.694733826199E-02,1.608090856183)); +#19275 = VECTOR('',#19276,1.); +#19276 = DIRECTION('',(-0.,0.365858921669,-0.930670322636)); +#19277 = ORIENTED_EDGE('',*,*,#19278,.F.); +#19278 = EDGE_CURVE('',#19279,#19271,#19281,.T.); +#19279 = VERTEX_POINT('',#19280); +#19280 = CARTESIAN_POINT('',(2.24,-5.119202171559E-02,1.68056198295)); +#19281 = LINE('',#19282,#19283); +#19282 = CARTESIAN_POINT('',(2.24,-6.543670516919E-02,1.68056198295)); +#19283 = VECTOR('',#19284,1.); +#19284 = DIRECTION('',(-0.,-1.,-1.522255199306E-14)); +#19285 = ORIENTED_EDGE('',*,*,#19286,.F.); +#19286 = EDGE_CURVE('',#19287,#19279,#19289,.T.); +#19287 = VERTEX_POINT('',#19288); +#19288 = CARTESIAN_POINT('',(2.24,-3.221643974294E-02,1.625974692344)); +#19289 = LINE('',#19290,#19291); +#19290 = CARTESIAN_POINT('',(2.24,-5.119202171559E-02,1.68056198295)); +#19291 = VECTOR('',#19292,1.); +#19292 = DIRECTION('',(-0.,-0.328346164813,0.944557460429)); +#19293 = ORIENTED_EDGE('',*,*,#19294,.F.); +#19294 = EDGE_CURVE('',#19295,#19287,#19297,.T.); +#19295 = VERTEX_POINT('',#19296); +#19296 = CARTESIAN_POINT('',(2.24,-3.065680286816E-02,1.619996084325)); +#19297 = LINE('',#19298,#19299); +#19298 = CARTESIAN_POINT('',(2.24,-3.221643974294E-02,1.625974692344)); +#19299 = VECTOR('',#19300,1.); +#19300 = DIRECTION('',(-0.,-0.252421897188,0.967617272386)); +#19301 = ORIENTED_EDGE('',*,*,#19302,.F.); +#19302 = EDGE_CURVE('',#19303,#19295,#19305,.T.); +#19303 = VERTEX_POINT('',#19304); +#19304 = CARTESIAN_POINT('',(2.24,-3.031888154575E-02,1.619996084325)); +#19305 = LINE('',#19306,#19307); +#19306 = CARTESIAN_POINT('',(2.24,-3.065680286816E-02,1.619996084325)); +#19307 = VECTOR('',#19308,1.); +#19308 = DIRECTION('',(-0.,-1.,-0.)); +#19309 = ORIENTED_EDGE('',*,*,#19310,.F.); +#19310 = EDGE_CURVE('',#19311,#19303,#19313,.T.); +#19311 = VERTEX_POINT('',#19312); +#19312 = CARTESIAN_POINT('',(2.24,-2.875924467097E-02,1.625870716552)); +#19313 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19314,#19315,#19316,#19317), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#19314 = CARTESIAN_POINT('',(2.24,-2.875924467097E-02,1.625870716552)); +#19315 = CARTESIAN_POINT('',(2.24,-2.953906310801E-02,1.623323309657)); +#19316 = CARTESIAN_POINT('',(2.24,-3.005894206696E-02,1.621347769616)); +#19317 = CARTESIAN_POINT('',(2.24,-3.031888154575E-02,1.619996084325)); +#19318 = ORIENTED_EDGE('',*,*,#19319,.F.); +#19319 = EDGE_CURVE('',#19203,#19311,#19320,.T.); +#19320 = LINE('',#19321,#19322); +#19321 = CARTESIAN_POINT('',(2.24,-2.875924467097E-02,1.625870716552)); +#19322 = VECTOR('',#19323,1.); +#19323 = DIRECTION('',(-0.,-0.340917796219,-0.9400931104)); +#19324 = FACE_BOUND('',#19325,.T.); +#19325 = EDGE_LOOP('',(#19326,#19337,#19346,#19354,#19362,#19370,#19378, + #19387,#19396,#19405,#19414,#19422,#19431,#19440)); +#19326 = ORIENTED_EDGE('',*,*,#19327,.F.); +#19327 = EDGE_CURVE('',#19328,#19330,#19332,.T.); +#19328 = VERTEX_POINT('',#19329); +#19329 = CARTESIAN_POINT('',(2.24,-0.164629610386,1.682225595617)); +#19330 = VERTEX_POINT('',#19331); +#19331 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.675467169161)); +#19332 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19333,#19334,#19335,#19336), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19333 = CARTESIAN_POINT('',(2.24,-0.164629610386,1.682225595617)); +#19334 = CARTESIAN_POINT('',(2.24,-0.174091407424,1.682225595617)); +#19335 = CARTESIAN_POINT('',(2.24,-0.182435464703,1.679990116096)); +#19336 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.675467169161)); +#19337 = ORIENTED_EDGE('',*,*,#19338,.F.); +#19338 = EDGE_CURVE('',#19339,#19328,#19341,.T.); +#19339 = VERTEX_POINT('',#19340); +#19340 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.654672010834)); +#19341 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19342,#19343,#19344,#19345), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#19342 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.654672010834)); +#19343 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.673075725953)); +#19344 = CARTESIAN_POINT('',(2.24,-0.147135683444,1.682225595617)); +#19345 = CARTESIAN_POINT('',(2.24,-0.164629610386,1.682225595617)); +#19346 = ORIENTED_EDGE('',*,*,#19347,.F.); +#19347 = EDGE_CURVE('',#19348,#19339,#19350,.T.); +#19348 = VERTEX_POINT('',#19349); +#19349 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.607934892496)); +#19350 = LINE('',#19351,#19352); +#19351 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.654672010834)); +#19352 = VECTOR('',#19353,1.); +#19353 = DIRECTION('',(-0.,-2.319788234798E-15,1.)); +#19354 = ORIENTED_EDGE('',*,*,#19355,.F.); +#19355 = EDGE_CURVE('',#19356,#19348,#19358,.T.); +#19356 = VERTEX_POINT('',#19357); +#19357 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.607934892496)); +#19358 = LINE('',#19359,#19360); +#19359 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.607934892496)); +#19360 = VECTOR('',#19361,1.); +#19361 = DIRECTION('',(-0.,1.,-0.)); +#19362 = ORIENTED_EDGE('',*,*,#19363,.F.); +#19363 = EDGE_CURVE('',#19364,#19356,#19366,.T.); +#19364 = VERTEX_POINT('',#19365); +#19365 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.619164277992)); +#19366 = LINE('',#19367,#19368); +#19367 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.607934892496)); +#19368 = VECTOR('',#19369,1.); +#19369 = DIRECTION('',(-0.,-0.,-1.)); +#19370 = ORIENTED_EDGE('',*,*,#19371,.F.); +#19371 = EDGE_CURVE('',#19372,#19364,#19374,.T.); +#19372 = VERTEX_POINT('',#19373); +#19373 = CARTESIAN_POINT('',(2.24,-0.151450678797,1.619164277992)); +#19374 = LINE('',#19375,#19376); +#19375 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.619164277992)); +#19376 = VECTOR('',#19377,1.); +#19377 = DIRECTION('',(-0.,1.,-0.)); +#19378 = ORIENTED_EDGE('',*,*,#19379,.F.); +#19379 = EDGE_CURVE('',#19380,#19372,#19382,.T.); +#19380 = VERTEX_POINT('',#19381); +#19381 = CARTESIAN_POINT('',(2.24,-0.173701498206,1.606219291934)); +#19382 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19383,#19384,#19385,#19386), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#19383 = CARTESIAN_POINT('',(2.24,-0.173701498206,1.606219291934)); +#19384 = CARTESIAN_POINT('',(2.24,-0.163901779844,1.606219291934)); +#19385 = CARTESIAN_POINT('',(2.24,-0.156467510743,1.610534287287)); +#19386 = CARTESIAN_POINT('',(2.24,-0.151450678797,1.619164277992)); +#19387 = ORIENTED_EDGE('',*,*,#19388,.F.); +#19388 = EDGE_CURVE('',#19389,#19380,#19391,.T.); +#19389 = VERTEX_POINT('',#19390); +#19390 = CARTESIAN_POINT('',(2.24,-0.190493588554,1.611937960473)); +#19391 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19392,#19393,#19394,#19395), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#19392 = CARTESIAN_POINT('',(2.24,-0.190493588554,1.611937960473)); +#19393 = CARTESIAN_POINT('',(2.24,-0.186334556889,1.608142844079)); +#19394 = CARTESIAN_POINT('',(2.24,-0.180745858089,1.606219291934)); +#19395 = CARTESIAN_POINT('',(2.24,-0.173701498206,1.606219291934)); +#19396 = ORIENTED_EDGE('',*,*,#19397,.F.); +#19397 = EDGE_CURVE('',#19398,#19389,#19400,.T.); +#19398 = VERTEX_POINT('',#19399); +#19399 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.627378365531)); +#19400 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19401,#19402,#19403,#19404), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#19401 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.627378365531)); +#19402 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.620879878554)); +#19403 = CARTESIAN_POINT('',(2.24,-0.19465262022,1.615733076868)); +#19404 = CARTESIAN_POINT('',(2.24,-0.190493588554,1.611937960473)); +#19405 = ORIENTED_EDGE('',*,*,#19406,.F.); +#19406 = EDGE_CURVE('',#19407,#19398,#19409,.T.); +#19407 = VERTEX_POINT('',#19408); +#19408 = CARTESIAN_POINT('',(2.24,-0.172635746342,1.651084846023)); +#19409 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19410,#19411,#19412,#19413), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#19410 = CARTESIAN_POINT('',(2.24,-0.172635746342,1.651084846023)); +#19411 = CARTESIAN_POINT('',(2.24,-0.188700006148,1.648849366503)); +#19412 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.640947206339)); +#19413 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.627378365531)); +#19414 = ORIENTED_EDGE('',*,*,#19415,.F.); +#19415 = EDGE_CURVE('',#19416,#19407,#19418,.T.); +#19416 = VERTEX_POINT('',#19417); +#19417 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.65410014398)); +#19418 = LINE('',#19419,#19420); +#19419 = CARTESIAN_POINT('',(2.24,-0.172635746342,1.651084846023)); +#19420 = VECTOR('',#19421,1.); +#19421 = DIRECTION('',(-0.,-0.990328603988,-0.138741688482)); +#19422 = ORIENTED_EDGE('',*,*,#19423,.F.); +#19423 = EDGE_CURVE('',#19424,#19416,#19426,.T.); +#19424 = VERTEX_POINT('',#19425); +#19425 = CARTESIAN_POINT('',(2.24,-0.16582533199,1.671880004349)); +#19426 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19427,#19428,#19429,#19430), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#19427 = CARTESIAN_POINT('',(2.24,-0.16582533199,1.671880004349)); +#19428 = CARTESIAN_POINT('',(2.24,-0.156025613628,1.671880004349)); +#19429 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.665953384226)); +#19430 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.65410014398)); +#19431 = ORIENTED_EDGE('',*,*,#19432,.F.); +#19432 = EDGE_CURVE('',#19433,#19424,#19435,.T.); +#19433 = VERTEX_POINT('',#19434); +#19434 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.663094049956)); +#19435 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19436,#19437,#19438,#19439), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#19436 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.663094049956)); +#19437 = CARTESIAN_POINT('',(2.24,-0.182461458651,1.668916694288)); +#19438 = CARTESIAN_POINT('',(2.24,-0.174533304539,1.671880004349)); +#19439 = CARTESIAN_POINT('',(2.24,-0.16582533199,1.671880004349)); +#19440 = ORIENTED_EDGE('',*,*,#19441,.F.); +#19441 = EDGE_CURVE('',#19330,#19433,#19442,.T.); +#19442 = LINE('',#19443,#19444); +#19443 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.663094049956)); +#19444 = VECTOR('',#19445,1.); +#19445 = DIRECTION('',(-0.,8.762561441095E-15,-1.)); +#19446 = FACE_BOUND('',#19447,.T.); +#19447 = EDGE_LOOP('',(#19448,#19458,#19466,#19474,#19482,#19490,#19498, + #19506,#19514,#19522,#19530,#19538)); +#19448 = ORIENTED_EDGE('',*,*,#19449,.F.); +#19449 = EDGE_CURVE('',#19450,#19452,#19454,.T.); +#19450 = VERTEX_POINT('',#19451); +#19451 = CARTESIAN_POINT('',(2.24,-0.208923297621,1.607934892496)); +#19452 = VERTEX_POINT('',#19453); +#19453 = CARTESIAN_POINT('',(2.24,-0.208923297621,1.619528193263)); +#19454 = LINE('',#19455,#19456); +#19455 = CARTESIAN_POINT('',(2.24,-0.208923297621,1.619528193263)); +#19456 = VECTOR('',#19457,1.); +#19457 = DIRECTION('',(-0.,-0.,1.)); +#19458 = ORIENTED_EDGE('',*,*,#19459,.F.); +#19459 = EDGE_CURVE('',#19460,#19450,#19462,.T.); +#19460 = VERTEX_POINT('',#19461); +#19461 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.607934892496)); +#19462 = LINE('',#19463,#19464); +#19463 = CARTESIAN_POINT('',(2.24,-0.208923297621,1.607934892496)); +#19464 = VECTOR('',#19465,1.); +#19465 = DIRECTION('',(-0.,1.,3.964809169307E-15)); +#19466 = ORIENTED_EDGE('',*,*,#19467,.F.); +#19467 = EDGE_CURVE('',#19468,#19460,#19470,.T.); +#19468 = VERTEX_POINT('',#19469); +#19469 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.709623216712)); +#19470 = LINE('',#19471,#19472); +#19471 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.607934892496)); +#19472 = VECTOR('',#19473,1.); +#19473 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#19474 = ORIENTED_EDGE('',*,*,#19475,.F.); +#19475 = EDGE_CURVE('',#19476,#19468,#19478,.T.); +#19476 = VERTEX_POINT('',#19477); +#19477 = CARTESIAN_POINT('',(2.24,-0.211236758985,1.709623216712)); +#19478 = LINE('',#19479,#19480); +#19479 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.709623216712)); +#19480 = VECTOR('',#19481,1.); +#19481 = DIRECTION('',(-0.,-1.,-4.139929772825E-15)); +#19482 = ORIENTED_EDGE('',*,*,#19483,.F.); +#19483 = EDGE_CURVE('',#19484,#19476,#19486,.T.); +#19484 = VERTEX_POINT('',#19485); +#19485 = CARTESIAN_POINT('',(2.24,-0.211236758985,1.697925940153)); +#19486 = LINE('',#19487,#19488); +#19487 = CARTESIAN_POINT('',(2.24,-0.211236758985,1.709623216712)); +#19488 = VECTOR('',#19489,1.); +#19489 = DIRECTION('',(-0.,-0.,1.)); +#19490 = ORIENTED_EDGE('',*,*,#19491,.F.); +#19491 = EDGE_CURVE('',#19492,#19484,#19494,.T.); +#19492 = VERTEX_POINT('',#19493); +#19493 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.697925940153)); +#19494 = LINE('',#19495,#19496); +#19495 = CARTESIAN_POINT('',(2.24,-0.211236758985,1.697925940153)); +#19496 = VECTOR('',#19497,1.); +#19497 = DIRECTION('',(-0.,1.,5.524475822673E-15)); +#19498 = ORIENTED_EDGE('',*,*,#19499,.F.); +#19499 = EDGE_CURVE('',#19500,#19492,#19502,.T.); +#19500 = VERTEX_POINT('',#19501); +#19501 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.665381517372)); +#19502 = LINE('',#19503,#19504); +#19503 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.697925940153)); +#19504 = VECTOR('',#19505,1.); +#19505 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#19506 = ORIENTED_EDGE('',*,*,#19507,.F.); +#19507 = EDGE_CURVE('',#19508,#19500,#19510,.T.); +#19508 = VERTEX_POINT('',#19509); +#19509 = CARTESIAN_POINT('',(2.24,-0.214122087203,1.665381517372)); +#19510 = LINE('',#19511,#19512); +#19511 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.665381517372)); +#19512 = VECTOR('',#19513,1.); +#19513 = DIRECTION('',(-0.,-1.,-0.)); +#19514 = ORIENTED_EDGE('',*,*,#19515,.F.); +#19515 = EDGE_CURVE('',#19516,#19508,#19518,.T.); +#19516 = VERTEX_POINT('',#19517); +#19517 = CARTESIAN_POINT('',(2.24,-0.214122087203,1.653736228709)); +#19518 = LINE('',#19519,#19520); +#19519 = CARTESIAN_POINT('',(2.24,-0.214122087203,1.665381517372)); +#19520 = VECTOR('',#19521,1.); +#19521 = DIRECTION('',(-0.,-9.310221531588E-15,1.)); +#19522 = ORIENTED_EDGE('',*,*,#19523,.F.); +#19523 = EDGE_CURVE('',#19524,#19516,#19526,.T.); +#19524 = VERTEX_POINT('',#19525); +#19525 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.653736228709)); +#19526 = LINE('',#19527,#19528); +#19527 = CARTESIAN_POINT('',(2.24,-0.214122087203,1.653736228709)); +#19528 = VECTOR('',#19529,1.); +#19529 = DIRECTION('',(-0.,1.,-0.)); +#19530 = ORIENTED_EDGE('',*,*,#19531,.F.); +#19531 = EDGE_CURVE('',#19532,#19524,#19534,.T.); +#19532 = VERTEX_POINT('',#19533); +#19533 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.619528193263)); +#19534 = LINE('',#19535,#19536); +#19535 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.653736228709)); +#19536 = VECTOR('',#19537,1.); +#19537 = DIRECTION('',(-0.,-3.169437117125E-15,1.)); +#19538 = ORIENTED_EDGE('',*,*,#19539,.F.); +#19539 = EDGE_CURVE('',#19452,#19532,#19540,.T.); +#19540 = LINE('',#19541,#19542); +#19541 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.619528193263)); +#19542 = VECTOR('',#19543,1.); +#19543 = DIRECTION('',(-0.,-1.,-5.216984673051E-15)); +#19544 = FACE_BOUND('',#19545,.T.); +#19545 = EDGE_LOOP('',(#19546,#19557,#19566,#19575,#19584,#19593,#19602, + #19610,#19619,#19628,#19637,#19646,#19655,#19664)); +#19546 = ORIENTED_EDGE('',*,*,#19547,.F.); +#19547 = EDGE_CURVE('',#19548,#19550,#19552,.T.); +#19548 = VERTEX_POINT('',#19549); +#19549 = CARTESIAN_POINT('',(2.24,-0.157845189982,1.76753773265)); +#19550 = VERTEX_POINT('',#19551); +#19551 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.773464352773)); +#19552 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19553,#19554,#19555,#19556), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#19553 = CARTESIAN_POINT('',(2.24,-0.157845189982,1.76753773265)); +#19554 = CARTESIAN_POINT('',(2.24,-0.14656381659,1.76753773265)); +#19555 = CARTESIAN_POINT('',(2.24,-0.137180001395,1.769513272691)); +#19556 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.773464352773)); +#19557 = ORIENTED_EDGE('',*,*,#19558,.F.); +#19558 = EDGE_CURVE('',#19559,#19548,#19561,.T.); +#19559 = VERTEX_POINT('',#19560); +#19560 = CARTESIAN_POINT('',(2.24,-0.19278105597,1.781418500833)); +#19561 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19562,#19563,#19564,#19565), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#19562 = CARTESIAN_POINT('',(2.24,-0.19278105597,1.781418500833)); +#19563 = CARTESIAN_POINT('',(2.24,-0.184073083421,1.772164655378)); +#19564 = CARTESIAN_POINT('',(2.24,-0.172427794758,1.76753773265)); +#19565 = CARTESIAN_POINT('',(2.24,-0.157845189982,1.76753773265)); +#19566 = ORIENTED_EDGE('',*,*,#19567,.F.); +#19567 = EDGE_CURVE('',#19568,#19559,#19570,.T.); +#19568 = VERTEX_POINT('',#19569); +#19569 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.818173943175)); +#19570 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19571,#19572,#19573,#19574), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#19571 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.818173943175)); +#19572 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.802941489701)); +#19573 = CARTESIAN_POINT('',(2.24,-0.201489028519,1.790672346288)); +#19574 = CARTESIAN_POINT('',(2.24,-0.19278105597,1.781418500833)); +#19575 = ORIENTED_EDGE('',*,*,#19576,.F.); +#19576 = EDGE_CURVE('',#19577,#19568,#19579,.T.); +#19577 = VERTEX_POINT('',#19578); +#19578 = CARTESIAN_POINT('',(2.24,-0.191143437252,1.857684743995)); +#19579 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19580,#19581,#19582,#19583), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#19580 = CARTESIAN_POINT('',(2.24,-0.191143437252,1.857684743995)); +#19581 = CARTESIAN_POINT('',(2.24,-0.200943155613,1.847703067998)); +#19582 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.834550130357)); +#19583 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.818173943175)); +#19584 = ORIENTED_EDGE('',*,*,#19585,.F.); +#19585 = EDGE_CURVE('',#19586,#19577,#19588,.T.); +#19586 = VERTEX_POINT('',#19587); +#19587 = CARTESIAN_POINT('',(2.24,-0.153790134108,1.87265725799)); +#19588 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19589,#19590,#19591,#19592), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#19589 = CARTESIAN_POINT('',(2.24,-0.153790134108,1.87265725799)); +#19590 = CARTESIAN_POINT('',(2.24,-0.168892617843,1.87265725799)); +#19591 = CARTESIAN_POINT('',(2.24,-0.181343718891,1.867666419992)); +#19592 = CARTESIAN_POINT('',(2.24,-0.191143437252,1.857684743995)); +#19593 = ORIENTED_EDGE('',*,*,#19594,.F.); +#19594 = EDGE_CURVE('',#19595,#19586,#19597,.T.); +#19595 = VERTEX_POINT('',#19596); +#19596 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.868498226325)); +#19597 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19598,#19599,#19600,#19601), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#19598 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.868498226325)); +#19599 = CARTESIAN_POINT('',(2.24,-0.136036267687,1.871253584803)); +#19600 = CARTESIAN_POINT('',(2.24,-0.144068397591,1.87265725799)); +#19601 = CARTESIAN_POINT('',(2.24,-0.153790134108,1.87265725799)); +#19602 = ORIENTED_EDGE('',*,*,#19603,.F.); +#19603 = EDGE_CURVE('',#19604,#19595,#19606,.T.); +#19604 = VERTEX_POINT('',#19605); +#19605 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.85477342183)); +#19606 = LINE('',#19607,#19608); +#19607 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.868498226325)); +#19608 = VECTOR('',#19609,1.); +#19609 = DIRECTION('',(-0.,-0.,1.)); +#19610 = ORIENTED_EDGE('',*,*,#19611,.F.); +#19611 = EDGE_CURVE('',#19612,#19604,#19614,.T.); +#19612 = VERTEX_POINT('',#19613); +#19613 = CARTESIAN_POINT('',(2.24,-0.153660164369,1.860804017744)); +#19614 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19615,#19616,#19617,#19618), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#19615 = CARTESIAN_POINT('',(2.24,-0.153660164369,1.860804017744)); +#19616 = CARTESIAN_POINT('',(2.24,-0.14495219182,1.860804017744)); +#19617 = CARTESIAN_POINT('',(2.24,-0.136972049812,1.858828477703)); +#19618 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.85477342183)); +#19619 = ORIENTED_EDGE('',*,*,#19620,.F.); +#19620 = EDGE_CURVE('',#19621,#19612,#19623,.T.); +#19621 = VERTEX_POINT('',#19622); +#19622 = CARTESIAN_POINT('',(2.24,-0.181369712838,1.849522644352)); +#19623 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19624,#19625,#19626,#19627), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#19624 = CARTESIAN_POINT('',(2.24,-0.181369712838,1.849522644352)); +#19625 = CARTESIAN_POINT('',(2.24,-0.174221377164,1.857060889245)); +#19626 = CARTESIAN_POINT('',(2.24,-0.164993525656,1.860804017744)); +#19627 = CARTESIAN_POINT('',(2.24,-0.153660164369,1.860804017744)); +#19628 = ORIENTED_EDGE('',*,*,#19629,.F.); +#19629 = EDGE_CURVE('',#19630,#19621,#19632,.T.); +#19630 = VERTEX_POINT('',#19631); +#19631 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.818953761612)); +#19632 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19633,#19634,#19635,#19636), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#19633 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.818953761612)); +#19634 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.831742783983)); +#19635 = CARTESIAN_POINT('',(2.24,-0.188492054565,1.841932411563)); +#19636 = CARTESIAN_POINT('',(2.24,-0.181369712838,1.849522644352)); +#19637 = ORIENTED_EDGE('',*,*,#19638,.F.); +#19638 = EDGE_CURVE('',#19639,#19630,#19641,.T.); +#19639 = VERTEX_POINT('',#19640); +#19640 = CARTESIAN_POINT('',(2.24,-0.182071549432,1.789944515747)); +#19641 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19642,#19643,#19644,#19645), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#19642 = CARTESIAN_POINT('',(2.24,-0.182071549432,1.789944515747)); +#19643 = CARTESIAN_POINT('',(2.24,-0.188726000097,1.79711884537)); +#19644 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.806788593992)); +#19645 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.818953761612)); +#19646 = ORIENTED_EDGE('',*,*,#19647,.F.); +#19647 = EDGE_CURVE('',#19648,#19639,#19650,.T.); +#19648 = VERTEX_POINT('',#19649); +#19649 = CARTESIAN_POINT('',(2.24,-0.155947631785,1.779235009209)); +#19650 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19651,#19652,#19653,#19654), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#19651 = CARTESIAN_POINT('',(2.24,-0.155947631785,1.779235009209)); +#19652 = CARTESIAN_POINT('',(2.24,-0.166709126218,1.779235009209)); +#19653 = CARTESIAN_POINT('',(2.24,-0.175417098768,1.78282217402)); +#19654 = CARTESIAN_POINT('',(2.24,-0.182071549432,1.789944515747)); +#19655 = ORIENTED_EDGE('',*,*,#19656,.F.); +#19656 = EDGE_CURVE('',#19657,#19648,#19659,.T.); +#19657 = VERTEX_POINT('',#19658); +#19658 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.786045423561)); +#19659 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#19660,#19661,#19662,#19663), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#19660 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.786045423561)); +#19661 = CARTESIAN_POINT('',(2.24,-0.137128013499,1.781522476625)); +#19662 = CARTESIAN_POINT('',(2.24,-0.145887973944,1.779235009209)); +#19663 = CARTESIAN_POINT('',(2.24,-0.155947631785,1.779235009209)); +#19664 = ORIENTED_EDGE('',*,*,#19665,.F.); +#19665 = EDGE_CURVE('',#19550,#19657,#19666,.T.); +#19666 = LINE('',#19667,#19668); +#19667 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.786045423561)); +#19668 = VECTOR('',#19669,1.); +#19669 = DIRECTION('',(-0.,-8.617725714965E-15,1.)); +#19670 = FACE_BOUND('',#19671,.T.); +#19671 = EDGE_LOOP('',(#19672,#19682,#19690,#19698,#19706,#19714,#19723, + #19731,#19740,#19748,#19757,#19765,#19774,#19782,#19791,#19799, + #19807,#19815,#19824,#19832,#19841)); +#19672 = ORIENTED_EDGE('',*,*,#19673,.F.); +#19673 = EDGE_CURVE('',#19674,#19676,#19678,.T.); +#19674 = VERTEX_POINT('',#19675); +#19675 = CARTESIAN_POINT('',(2.24,-0.9,2.55)); +#19676 = VERTEX_POINT('',#19677); +#19677 = CARTESIAN_POINT('',(2.24,0.2,2.55)); +#19678 = LINE('',#19679,#19680); +#19679 = CARTESIAN_POINT('',(2.24,-1.05,2.55)); +#19680 = VECTOR('',#19681,1.); +#19681 = DIRECTION('',(0.,1.,0.)); +#19682 = ORIENTED_EDGE('',*,*,#19683,.F.); +#19683 = EDGE_CURVE('',#19684,#19674,#19686,.T.); +#19684 = VERTEX_POINT('',#19685); +#19685 = CARTESIAN_POINT('',(2.24,-1.05,2.55)); +#19686 = LINE('',#19687,#19688); +#19687 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#19688 = VECTOR('',#19689,1.); +#19689 = DIRECTION('',(-0.,1.,-0.)); +#19690 = ORIENTED_EDGE('',*,*,#19691,.T.); +#19691 = EDGE_CURVE('',#19684,#19692,#19694,.T.); +#19692 = VERTEX_POINT('',#19693); +#19693 = CARTESIAN_POINT('',(2.24,-1.05,0.95)); +#19694 = LINE('',#19695,#19696); +#19695 = CARTESIAN_POINT('',(2.24,-1.05,2.55)); +#19696 = VECTOR('',#19697,1.); +#19697 = DIRECTION('',(-2.710505431214E-16,-0.,-1.)); +#19698 = ORIENTED_EDGE('',*,*,#19699,.T.); +#19699 = EDGE_CURVE('',#19692,#19700,#19702,.T.); +#19700 = VERTEX_POINT('',#19701); +#19701 = CARTESIAN_POINT('',(2.24,-0.9,0.95)); +#19702 = LINE('',#19703,#19704); +#19703 = CARTESIAN_POINT('',(2.24,-1.2,0.95)); +#19704 = VECTOR('',#19705,1.); +#19705 = DIRECTION('',(-0.,1.,-0.)); +#19706 = ORIENTED_EDGE('',*,*,#19707,.F.); +#19707 = EDGE_CURVE('',#19708,#19700,#19710,.T.); +#19708 = VERTEX_POINT('',#19709); +#19709 = CARTESIAN_POINT('',(2.24,-0.5,0.95)); +#19710 = LINE('',#19711,#19712); +#19711 = CARTESIAN_POINT('',(2.24,-0.35,0.95)); +#19712 = VECTOR('',#19713,1.); +#19713 = DIRECTION('',(0.,-1.,0.)); +#19714 = ORIENTED_EDGE('',*,*,#19715,.T.); +#19715 = EDGE_CURVE('',#19708,#19716,#19718,.T.); +#19716 = VERTEX_POINT('',#19717); +#19717 = CARTESIAN_POINT('',(2.24,-0.35,0.8)); +#19718 = CIRCLE('',#19719,0.15); +#19719 = AXIS2_PLACEMENT_3D('',#19720,#19721,#19722); +#19720 = CARTESIAN_POINT('',(2.24,-0.5,0.8)); +#19721 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#19722 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19723 = ORIENTED_EDGE('',*,*,#19724,.F.); +#19724 = EDGE_CURVE('',#19725,#19716,#19727,.T.); +#19725 = VERTEX_POINT('',#19726); +#19726 = CARTESIAN_POINT('',(2.24,-0.35,-0.15)); +#19727 = LINE('',#19728,#19729); +#19728 = CARTESIAN_POINT('',(2.24,-0.35,-0.45)); +#19729 = VECTOR('',#19730,1.); +#19730 = DIRECTION('',(0.,-1.161645184806E-16,1.)); +#19731 = ORIENTED_EDGE('',*,*,#19732,.T.); +#19732 = EDGE_CURVE('',#19725,#19733,#19735,.T.); +#19733 = VERTEX_POINT('',#19734); +#19734 = CARTESIAN_POINT('',(2.24,-5.E-02,-0.45)); +#19735 = CIRCLE('',#19736,0.3); +#19736 = AXIS2_PLACEMENT_3D('',#19737,#19738,#19739); +#19737 = CARTESIAN_POINT('',(2.24,-5.E-02,-0.15)); +#19738 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#19739 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19740 = ORIENTED_EDGE('',*,*,#19741,.F.); +#19741 = EDGE_CURVE('',#19742,#19733,#19744,.T.); +#19742 = VERTEX_POINT('',#19743); +#19743 = CARTESIAN_POINT('',(2.24,5.E-02,-0.45)); +#19744 = LINE('',#19745,#19746); +#19745 = CARTESIAN_POINT('',(2.24,0.35,-0.45)); +#19746 = VECTOR('',#19747,1.); +#19747 = DIRECTION('',(0.,-1.,0.)); +#19748 = ORIENTED_EDGE('',*,*,#19749,.T.); +#19749 = EDGE_CURVE('',#19742,#19750,#19752,.T.); +#19750 = VERTEX_POINT('',#19751); +#19751 = CARTESIAN_POINT('',(2.24,0.35,-0.15)); +#19752 = CIRCLE('',#19753,0.3); +#19753 = AXIS2_PLACEMENT_3D('',#19754,#19755,#19756); +#19754 = CARTESIAN_POINT('',(2.24,5.E-02,-0.15)); +#19755 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#19756 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19757 = ORIENTED_EDGE('',*,*,#19758,.F.); +#19758 = EDGE_CURVE('',#19759,#19750,#19761,.T.); +#19759 = VERTEX_POINT('',#19760); +#19760 = CARTESIAN_POINT('',(2.24,0.35,1.1)); +#19761 = LINE('',#19762,#19763); +#19762 = CARTESIAN_POINT('',(2.24,0.35,1.25)); +#19763 = VECTOR('',#19764,1.); +#19764 = DIRECTION('',(-0.,-1.27553196763E-16,-1.)); +#19765 = ORIENTED_EDGE('',*,*,#19766,.T.); +#19766 = EDGE_CURVE('',#19759,#19767,#19769,.T.); +#19767 = VERTEX_POINT('',#19768); +#19768 = CARTESIAN_POINT('',(2.24,0.5,1.25)); +#19769 = CIRCLE('',#19770,0.15); +#19770 = AXIS2_PLACEMENT_3D('',#19771,#19772,#19773); +#19771 = CARTESIAN_POINT('',(2.24,0.5,1.1)); +#19772 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#19773 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19774 = ORIENTED_EDGE('',*,*,#19775,.F.); +#19775 = EDGE_CURVE('',#19776,#19767,#19778,.T.); +#19776 = VERTEX_POINT('',#19777); +#19777 = CARTESIAN_POINT('',(2.24,0.56,1.25)); +#19778 = LINE('',#19779,#19780); +#19779 = CARTESIAN_POINT('',(2.24,0.71,1.25)); +#19780 = VECTOR('',#19781,1.); +#19781 = DIRECTION('',(0.,-1.,0.)); +#19782 = ORIENTED_EDGE('',*,*,#19783,.T.); +#19783 = EDGE_CURVE('',#19776,#19784,#19786,.T.); +#19784 = VERTEX_POINT('',#19785); +#19785 = CARTESIAN_POINT('',(2.24,0.709829229338,1.107155559798)); +#19786 = CIRCLE('',#19787,0.15); +#19787 = AXIS2_PLACEMENT_3D('',#19788,#19789,#19790); +#19788 = CARTESIAN_POINT('',(2.24,0.56,1.1)); +#19789 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#19790 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19791 = ORIENTED_EDGE('',*,*,#19792,.F.); +#19792 = EDGE_CURVE('',#19793,#19784,#19795,.T.); +#19793 = VERTEX_POINT('',#19794); +#19794 = CARTESIAN_POINT('',(2.24,1.31,1.107155559798)); +#19795 = LINE('',#19796,#19797); +#19796 = CARTESIAN_POINT('',(2.24,1.31,1.107155559798)); +#19797 = VECTOR('',#19798,1.); +#19798 = DIRECTION('',(0.,-1.,0.)); +#19799 = ORIENTED_EDGE('',*,*,#19800,.F.); +#19800 = EDGE_CURVE('',#19801,#19793,#19803,.T.); +#19801 = VERTEX_POINT('',#19802); +#19802 = CARTESIAN_POINT('',(2.24,1.31,2.392844440202)); +#19803 = LINE('',#19804,#19805); +#19804 = CARTESIAN_POINT('',(2.24,1.31,2.392844440202)); +#19805 = VECTOR('',#19806,1.); +#19806 = DIRECTION('',(-0.,-1.686570038849E-16,-1.)); +#19807 = ORIENTED_EDGE('',*,*,#19808,.F.); +#19808 = EDGE_CURVE('',#19809,#19801,#19811,.T.); +#19809 = VERTEX_POINT('',#19810); +#19810 = CARTESIAN_POINT('',(2.24,0.709829229338,2.392844440202)); +#19811 = LINE('',#19812,#19813); +#19812 = CARTESIAN_POINT('',(2.24,0.71,2.392844440202)); +#19813 = VECTOR('',#19814,1.); +#19814 = DIRECTION('',(0.,1.,0.)); +#19815 = ORIENTED_EDGE('',*,*,#19816,.T.); +#19816 = EDGE_CURVE('',#19809,#19817,#19819,.T.); +#19817 = VERTEX_POINT('',#19818); +#19818 = CARTESIAN_POINT('',(2.24,0.56,2.25)); +#19819 = CIRCLE('',#19820,0.15); +#19820 = AXIS2_PLACEMENT_3D('',#19821,#19822,#19823); +#19821 = CARTESIAN_POINT('',(2.24,0.56,2.4)); +#19822 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#19823 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19824 = ORIENTED_EDGE('',*,*,#19825,.F.); +#19825 = EDGE_CURVE('',#19826,#19817,#19828,.T.); +#19826 = VERTEX_POINT('',#19827); +#19827 = CARTESIAN_POINT('',(2.24,0.5,2.25)); +#19828 = LINE('',#19829,#19830); +#19829 = CARTESIAN_POINT('',(2.24,0.35,2.25)); +#19830 = VECTOR('',#19831,1.); +#19831 = DIRECTION('',(0.,1.,0.)); +#19832 = ORIENTED_EDGE('',*,*,#19833,.T.); +#19833 = EDGE_CURVE('',#19826,#19834,#19836,.T.); +#19834 = VERTEX_POINT('',#19835); +#19835 = CARTESIAN_POINT('',(2.24,0.35,2.4)); +#19836 = CIRCLE('',#19837,0.15); +#19837 = AXIS2_PLACEMENT_3D('',#19838,#19839,#19840); +#19838 = CARTESIAN_POINT('',(2.24,0.5,2.4)); +#19839 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#19840 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19841 = ORIENTED_EDGE('',*,*,#19842,.T.); +#19842 = EDGE_CURVE('',#19834,#19676,#19843,.T.); +#19843 = CIRCLE('',#19844,0.15); +#19844 = AXIS2_PLACEMENT_3D('',#19845,#19846,#19847); +#19845 = CARTESIAN_POINT('',(2.24,0.2,2.4)); +#19846 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#19847 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#19848 = FACE_BOUND('',#19849,.T.); +#19849 = EDGE_LOOP('',(#19850,#19860,#19868,#19876,#19884,#19892)); +#19850 = ORIENTED_EDGE('',*,*,#19851,.F.); +#19851 = EDGE_CURVE('',#19852,#19854,#19856,.T.); +#19852 = VERTEX_POINT('',#19853); +#19853 = CARTESIAN_POINT('',(2.24,-0.209989049485,1.769253333212)); +#19854 = VERTEX_POINT('',#19855); +#19855 = CARTESIAN_POINT('',(2.24,-0.209989049485,1.780846633979)); +#19856 = LINE('',#19857,#19858); +#19857 = CARTESIAN_POINT('',(2.24,-0.209989049485,1.780846633979)); +#19858 = VECTOR('',#19859,1.); +#19859 = DIRECTION('',(-0.,-0.,1.)); +#19860 = ORIENTED_EDGE('',*,*,#19861,.F.); +#19861 = EDGE_CURVE('',#19862,#19852,#19864,.T.); +#19862 = VERTEX_POINT('',#19863); +#19863 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.769253333212)); +#19864 = LINE('',#19865,#19866); +#19865 = CARTESIAN_POINT('',(2.24,-0.209989049485,1.769253333212)); +#19866 = VECTOR('',#19867,1.); +#19867 = DIRECTION('',(-0.,1.,4.043605667569E-15)); +#19868 = ORIENTED_EDGE('',*,*,#19869,.F.); +#19869 = EDGE_CURVE('',#19870,#19862,#19872,.T.); +#19870 = VERTEX_POINT('',#19871); +#19871 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.870941657428)); +#19872 = LINE('',#19873,#19874); +#19873 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.769253333212)); +#19874 = VECTOR('',#19875,1.); +#19875 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#19876 = ORIENTED_EDGE('',*,*,#19877,.F.); +#19877 = EDGE_CURVE('',#19878,#19870,#19880,.T.); +#19878 = VERTEX_POINT('',#19879); +#19879 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.870941657428)); +#19880 = LINE('',#19881,#19882); +#19881 = CARTESIAN_POINT('',(2.24,-0.263614564019,1.870941657428)); +#19882 = VECTOR('',#19883,1.); +#19883 = DIRECTION('',(-0.,-1.,-0.)); +#19884 = ORIENTED_EDGE('',*,*,#19885,.F.); +#19885 = EDGE_CURVE('',#19886,#19878,#19888,.T.); +#19886 = VERTEX_POINT('',#19887); +#19887 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.780846633979)); +#19888 = LINE('',#19889,#19890); +#19889 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.870941657428)); +#19890 = VECTOR('',#19891,1.); +#19891 = DIRECTION('',(-0.,-3.610195539053E-15,1.)); +#19892 = ORIENTED_EDGE('',*,*,#19893,.F.); +#19893 = EDGE_CURVE('',#19854,#19886,#19894,.T.); +#19894 = LINE('',#19895,#19896); +#19895 = CARTESIAN_POINT('',(2.24,-0.250487620326,1.780846633979)); +#19896 = VECTOR('',#19897,1.); +#19897 = DIRECTION('',(-0.,-1.,-5.354273743371E-15)); +#19898 = FACE_BOUND('',#19899,.T.); +#19899 = EDGE_LOOP('',(#19900,#19910,#19918,#19926,#19934,#19942,#19950, + #19958,#19966,#19974,#19982,#19990)); +#19900 = ORIENTED_EDGE('',*,*,#19901,.F.); +#19901 = EDGE_CURVE('',#19902,#19904,#19906,.T.); +#19902 = VERTEX_POINT('',#19903); +#19903 = CARTESIAN_POINT('',(2.24,-5.464921678756E-02,1.769253333212)); +#19904 = VERTEX_POINT('',#19905); +#19905 = CARTESIAN_POINT('',(2.24,-5.464921678756E-02,1.780846633979)); +#19906 = LINE('',#19907,#19908); +#19907 = CARTESIAN_POINT('',(2.24,-5.464921678756E-02,1.780846633979)); +#19908 = VECTOR('',#19909,1.); +#19909 = DIRECTION('',(-0.,-0.,1.)); +#19910 = ORIENTED_EDGE('',*,*,#19911,.F.); +#19911 = EDGE_CURVE('',#19912,#19902,#19914,.T.); +#19912 = VERTEX_POINT('',#19913); +#19913 = CARTESIAN_POINT('',(2.24,-0.109340483186,1.769253333212)); +#19914 = LINE('',#19915,#19916); +#19915 = CARTESIAN_POINT('',(2.24,-5.464921678756E-02,1.769253333212)); +#19916 = VECTOR('',#19917,1.); +#19917 = DIRECTION('',(-0.,1.,3.964809169332E-15)); +#19918 = ORIENTED_EDGE('',*,*,#19919,.F.); +#19919 = EDGE_CURVE('',#19920,#19912,#19922,.T.); +#19920 = VERTEX_POINT('',#19921); +#19921 = CARTESIAN_POINT('',(2.24,-0.109340483186,1.870941657428)); +#19922 = LINE('',#19923,#19924); +#19923 = CARTESIAN_POINT('',(2.24,-0.109340483186,1.769253333212)); +#19924 = VECTOR('',#19925,1.); +#19925 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#19926 = ORIENTED_EDGE('',*,*,#19927,.F.); +#19927 = EDGE_CURVE('',#19928,#19920,#19930,.T.); +#19928 = VERTEX_POINT('',#19929); +#19929 = CARTESIAN_POINT('',(2.24,-5.696267815116E-02,1.870941657428)); +#19930 = LINE('',#19931,#19932); +#19931 = CARTESIAN_POINT('',(2.24,-0.109340483186,1.870941657428)); +#19932 = VECTOR('',#19933,1.); +#19933 = DIRECTION('',(-0.,-1.,-4.139929772825E-15)); +#19934 = ORIENTED_EDGE('',*,*,#19935,.F.); +#19935 = EDGE_CURVE('',#19936,#19928,#19938,.T.); +#19936 = VERTEX_POINT('',#19937); +#19937 = CARTESIAN_POINT('',(2.24,-5.696267815116E-02,1.85924438087)); +#19938 = LINE('',#19939,#19940); +#19939 = CARTESIAN_POINT('',(2.24,-5.696267815116E-02,1.870941657428)); +#19940 = VECTOR('',#19941,1.); +#19941 = DIRECTION('',(-0.,-0.,1.)); +#19942 = ORIENTED_EDGE('',*,*,#19943,.F.); +#19943 = EDGE_CURVE('',#19944,#19936,#19946,.T.); +#19944 = VERTEX_POINT('',#19945); +#19945 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.85924438087)); +#19946 = LINE('',#19947,#19948); +#19947 = CARTESIAN_POINT('',(2.24,-5.696267815116E-02,1.85924438087)); +#19948 = VECTOR('',#19949,1.); +#19949 = DIRECTION('',(-0.,1.,5.524475822672E-15)); +#19950 = ORIENTED_EDGE('',*,*,#19951,.F.); +#19951 = EDGE_CURVE('',#19952,#19944,#19954,.T.); +#19952 = VERTEX_POINT('',#19953); +#19953 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.826699958089)); +#19954 = LINE('',#19955,#19956); +#19955 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.85924438087)); +#19956 = VECTOR('',#19957,1.); +#19957 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#19958 = ORIENTED_EDGE('',*,*,#19959,.F.); +#19959 = EDGE_CURVE('',#19960,#19952,#19962,.T.); +#19960 = VERTEX_POINT('',#19961); +#19961 = CARTESIAN_POINT('',(2.24,-5.984800636912E-02,1.826699958089)); +#19962 = LINE('',#19963,#19964); +#19963 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.826699958089)); +#19964 = VECTOR('',#19965,1.); +#19965 = DIRECTION('',(-0.,-1.,-0.)); +#19966 = ORIENTED_EDGE('',*,*,#19967,.F.); +#19967 = EDGE_CURVE('',#19968,#19960,#19970,.T.); +#19968 = VERTEX_POINT('',#19969); +#19969 = CARTESIAN_POINT('',(2.24,-5.984800636912E-02,1.815054669426)); +#19970 = LINE('',#19971,#19972); +#19971 = CARTESIAN_POINT('',(2.24,-5.984800636912E-02,1.826699958089)); +#19972 = VECTOR('',#19973,1.); +#19973 = DIRECTION('',(-0.,-0.,1.)); +#19974 = ORIENTED_EDGE('',*,*,#19975,.F.); +#19975 = EDGE_CURVE('',#19976,#19968,#19978,.T.); +#19976 = VERTEX_POINT('',#19977); +#19977 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.815054669426)); +#19978 = LINE('',#19979,#19980); +#19979 = CARTESIAN_POINT('',(2.24,-5.984800636912E-02,1.815054669426)); +#19980 = VECTOR('',#19981,1.); +#19981 = DIRECTION('',(-0.,1.,-0.)); +#19982 = ORIENTED_EDGE('',*,*,#19983,.F.); +#19983 = EDGE_CURVE('',#19984,#19976,#19986,.T.); +#19984 = VERTEX_POINT('',#19985); +#19985 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.780846633979)); +#19986 = LINE('',#19987,#19988); +#19987 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.815054669426)); +#19988 = VECTOR('',#19989,1.); +#19989 = DIRECTION('',(-0.,-6.338874234249E-15,1.)); +#19990 = ORIENTED_EDGE('',*,*,#19991,.F.); +#19991 = EDGE_CURVE('',#19904,#19984,#19992,.T.); +#19992 = LINE('',#19993,#19994); +#19993 = CARTESIAN_POINT('',(2.24,-9.62135394921E-02,1.780846633979)); +#19994 = VECTOR('',#19995,1.); +#19995 = DIRECTION('',(-0.,-1.,-0.)); +#19996 = FACE_BOUND('',#19997,.T.); +#19997 = EDGE_LOOP('',(#19998,#20008,#20016,#20024,#20033,#20042,#20051) + ); +#19998 = ORIENTED_EDGE('',*,*,#19999,.F.); +#19999 = EDGE_CURVE('',#20000,#20002,#20004,.T.); +#20000 = VERTEX_POINT('',#20001); +#20001 = CARTESIAN_POINT('',(2.24,-3.543968928332E-02,1.769253333212)); +#20002 = VERTEX_POINT('',#20003); +#20003 = CARTESIAN_POINT('',(2.24,-7.470201334381E-03,1.769253333212)); +#20004 = LINE('',#20005,#20006); +#20005 = CARTESIAN_POINT('',(2.24,-7.470201334381E-03,1.769253333212)); +#20006 = VECTOR('',#20007,1.); +#20007 = DIRECTION('',(-0.,1.,-0.)); +#20008 = ORIENTED_EDGE('',*,*,#20009,.F.); +#20009 = EDGE_CURVE('',#20010,#20000,#20012,.T.); +#20010 = VERTEX_POINT('',#20011); +#20011 = CARTESIAN_POINT('',(2.24,-3.543968928332E-02,1.870941657428)); +#20012 = LINE('',#20013,#20014); +#20013 = CARTESIAN_POINT('',(2.24,-3.543968928332E-02,1.769253333212)); +#20014 = VECTOR('',#20015,1.); +#20015 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#20016 = ORIENTED_EDGE('',*,*,#20017,.F.); +#20017 = EDGE_CURVE('',#20018,#20010,#20020,.T.); +#20018 = VERTEX_POINT('',#20019); +#20019 = CARTESIAN_POINT('',(2.24,-6.430443417865E-03,1.870941657428)); +#20020 = LINE('',#20021,#20022); +#20021 = CARTESIAN_POINT('',(2.24,-3.543968928332E-02,1.870941657428)); +#20022 = VECTOR('',#20023,1.); +#20023 = DIRECTION('',(-0.,-1.,-7.474873200869E-15)); +#20024 = ORIENTED_EDGE('',*,*,#20025,.F.); +#20025 = EDGE_CURVE('',#20026,#20018,#20028,.T.); +#20026 = VERTEX_POINT('',#20027); +#20027 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.857476792412)); +#20028 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20029,#20030,#20031,#20032), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#20029 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.857476792412)); +#20030 = CARTESIAN_POINT('',(2.24,2.179898400986E-02,1.866470698388)); +#20031 = CARTESIAN_POINT('',(2.24,8.983967691298E-03,1.870941657428)); +#20032 = CARTESIAN_POINT('',(2.24,-6.430443417865E-03,1.870941657428)); +#20033 = ORIENTED_EDGE('',*,*,#20034,.F.); +#20034 = EDGE_CURVE('',#20035,#20026,#20037,.T.); +#20035 = VERTEX_POINT('',#20036); +#20036 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.821397192716)); +#20037 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20038,#20039,#20040,#20041), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#20038 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.821397192716)); +#20039 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.836473682502)); +#20040 = CARTESIAN_POINT('',(2.24,4.223022706577E-02,1.848482886435)); +#20041 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.857476792412)); +#20042 = ORIENTED_EDGE('',*,*,#20043,.F.); +#20043 = EDGE_CURVE('',#20044,#20035,#20046,.T.); +#20044 = VERTEX_POINT('',#20045); +#20045 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.783498016666)); +#20046 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20047,#20048,#20049,#20050), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#20047 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.783498016666)); +#20048 = CARTESIAN_POINT('',(2.24,4.223022706577E-02,1.7930118016)); +#20049 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.805644860284)); +#20050 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.821397192716)); +#20051 = ORIENTED_EDGE('',*,*,#20052,.F.); +#20052 = EDGE_CURVE('',#20002,#20044,#20053,.T.); +#20053 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20054,#20055,#20056,#20057), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#20054 = CARTESIAN_POINT('',(2.24,-7.470201334381E-03,1.769253333212)); +#20055 = CARTESIAN_POINT('',(2.24,8.62005242031E-03,1.769253333212)); +#20056 = CARTESIAN_POINT('',(2.24,2.179898400986E-02,1.773984231732)); +#20057 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.783498016666)); +#20058 = FACE_BOUND('',#20059,.T.); +#20059 = EDGE_LOOP('',(#20060,#20070,#20078,#20086,#20094,#20102,#20110, + #20118)); +#20060 = ORIENTED_EDGE('',*,*,#20061,.F.); +#20061 = EDGE_CURVE('',#20062,#20064,#20066,.T.); +#20062 = VERTEX_POINT('',#20063); +#20063 = CARTESIAN_POINT('',(2.24,0.144490418135,1.769253333212)); +#20064 = VERTEX_POINT('',#20065); +#20065 = CARTESIAN_POINT('',(2.24,0.105759435752,1.870941657428)); +#20066 = LINE('',#20067,#20068); +#20067 = CARTESIAN_POINT('',(2.24,0.105759435752,1.870941657428)); +#20068 = VECTOR('',#20069,1.); +#20069 = DIRECTION('',(-0.,-0.35593572437,0.934510438742)); +#20070 = ORIENTED_EDGE('',*,*,#20071,.F.); +#20071 = EDGE_CURVE('',#20072,#20062,#20074,.T.); +#20072 = VERTEX_POINT('',#20073); +#20073 = CARTESIAN_POINT('',(2.24,0.129985795203,1.769253333212)); +#20074 = LINE('',#20075,#20076); +#20075 = CARTESIAN_POINT('',(2.24,0.144490418135,1.769253333212)); +#20076 = VECTOR('',#20077,1.); +#20077 = DIRECTION('',(-0.,1.,-0.)); +#20078 = ORIENTED_EDGE('',*,*,#20079,.F.); +#20079 = EDGE_CURVE('',#20080,#20072,#20082,.T.); +#20080 = VERTEX_POINT('',#20081); +#20081 = CARTESIAN_POINT('',(2.24,0.119614209987,1.797066857474)); +#20082 = LINE('',#20083,#20084); +#20083 = CARTESIAN_POINT('',(2.24,0.129985795203,1.769253333212)); +#20084 = VECTOR('',#20085,1.); +#20085 = DIRECTION('',(-0.,0.349395479469,-0.936975345954)); +#20086 = ORIENTED_EDGE('',*,*,#20087,.F.); +#20087 = EDGE_CURVE('',#20088,#20080,#20090,.T.); +#20088 = VERTEX_POINT('',#20089); +#20089 = CARTESIAN_POINT('',(2.24,7.727006884523E-02,1.797066857474)); +#20090 = LINE('',#20091,#20092); +#20091 = CARTESIAN_POINT('',(2.24,0.119614209987,1.797066857474)); +#20092 = VECTOR('',#20093,1.); +#20093 = DIRECTION('',(-0.,1.,5.120907607231E-15)); +#20094 = ORIENTED_EDGE('',*,*,#20095,.F.); +#20095 = EDGE_CURVE('',#20096,#20088,#20098,.T.); +#20096 = VERTEX_POINT('',#20097); +#20097 = CARTESIAN_POINT('',(2.24,6.749634443189E-02,1.769253333212)); +#20098 = LINE('',#20099,#20100); +#20099 = CARTESIAN_POINT('',(2.24,7.727006884523E-02,1.797066857474)); +#20100 = VECTOR('',#20101,1.); +#20101 = DIRECTION('',(-0.,0.33152841835,0.943445233082)); +#20102 = ORIENTED_EDGE('',*,*,#20103,.F.); +#20103 = EDGE_CURVE('',#20104,#20096,#20106,.T.); +#20104 = VERTEX_POINT('',#20105); +#20105 = CARTESIAN_POINT('',(2.24,5.299172149986E-02,1.769253333212)); +#20106 = LINE('',#20107,#20108); +#20107 = CARTESIAN_POINT('',(2.24,6.749634443189E-02,1.769253333212)); +#20108 = VECTOR('',#20109,1.); +#20109 = DIRECTION('',(-0.,1.,-0.)); +#20110 = ORIENTED_EDGE('',*,*,#20111,.F.); +#20111 = EDGE_CURVE('',#20112,#20104,#20114,.T.); +#20112 = VERTEX_POINT('',#20113); +#20113 = CARTESIAN_POINT('',(2.24,9.172270388219E-02,1.870941657428)); +#20114 = LINE('',#20115,#20116); +#20115 = CARTESIAN_POINT('',(2.24,5.299172149986E-02,1.769253333212)); +#20116 = VECTOR('',#20117,1.); +#20117 = DIRECTION('',(-0.,-0.355935724364,-0.934510438744)); +#20118 = ORIENTED_EDGE('',*,*,#20119,.F.); +#20119 = EDGE_CURVE('',#20064,#20112,#20120,.T.); +#20120 = LINE('',#20121,#20122); +#20121 = CARTESIAN_POINT('',(2.24,9.17227038822E-02,1.870941657428)); +#20122 = VECTOR('',#20123,1.); +#20123 = DIRECTION('',(-0.,-1.,-0.)); +#20124 = FACE_BOUND('',#20125,.T.); +#20125 = EDGE_LOOP('',(#20126,#20137,#20146,#20155,#20164,#20173,#20182, + #20191,#20200,#20209,#20217,#20226,#20235,#20244,#20253,#20262, + #20271,#20280,#20289,#20298,#20307)); +#20126 = ORIENTED_EDGE('',*,*,#20127,.F.); +#20127 = EDGE_CURVE('',#20128,#20130,#20132,.T.); +#20128 = VERTEX_POINT('',#20129); +#20129 = CARTESIAN_POINT('',(2.24,-0.100164619574,1.616616871097)); +#20130 = VERTEX_POINT('',#20131); +#20131 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.623635237032)); +#20132 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20133,#20134,#20135,#20136), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#20133 = CARTESIAN_POINT('',(2.24,-0.100164619574,1.616616871097)); +#20134 = CARTESIAN_POINT('',(2.24,-0.107650876572,1.616616871097)); +#20135 = CARTESIAN_POINT('',(2.24,-0.114617254611,1.618956326409)); +#20136 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.623635237032)); +#20137 = ORIENTED_EDGE('',*,*,#20138,.F.); +#20138 = EDGE_CURVE('',#20139,#20128,#20141,.T.); +#20139 = VERTEX_POINT('',#20140); +#20140 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.626442583406)); +#20141 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20142,#20143,#20144,#20145), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#20142 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.626442583406)); +#20143 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.619892108533)); +#20144 = CARTESIAN_POINT('',(2.24,-9.015694962952E-02,1.616616871097)); +#20145 = CARTESIAN_POINT('',(2.24,-0.100164619574,1.616616871097)); +#20146 = ORIENTED_EDGE('',*,*,#20147,.F.); +#20147 = EDGE_CURVE('',#20148,#20139,#20150,.T.); +#20148 = VERTEX_POINT('',#20149); +#20149 = CARTESIAN_POINT('',(2.24,-8.841535511994E-02,1.633356973549)); +#20150 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20151,#20152,#20153,#20154), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#20151 = CARTESIAN_POINT('',(2.24,-8.841535511994E-02,1.633356973549)); +#20152 = CARTESIAN_POINT('',(2.24,-8.623186349539E-02,1.631537397196)); +#20153 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.62924992978)); +#20154 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.626442583406)); +#20155 = ORIENTED_EDGE('',*,*,#20156,.F.); +#20156 = EDGE_CURVE('',#20157,#20148,#20159,.T.); +#20157 = VERTEX_POINT('',#20158); +#20158 = CARTESIAN_POINT('',(2.24,-0.101750250396,1.639855460526)); +#20159 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20160,#20161,#20162,#20163), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#20160 = CARTESIAN_POINT('',(2.24,-0.101750250396,1.639855460526)); +#20161 = CARTESIAN_POINT('',(2.24,-9.504381183619E-02,1.637360041527)); +#20162 = CARTESIAN_POINT('',(2.24,-9.059884674415E-02,1.635176549903)); +#20163 = CARTESIAN_POINT('',(2.24,-8.841535511994E-02,1.633356973549)); +#20164 = ORIENTED_EDGE('',*,*,#20165,.F.); +#20165 = EDGE_CURVE('',#20166,#20157,#20168,.T.); +#20166 = VERTEX_POINT('',#20167); +#20167 = CARTESIAN_POINT('',(2.24,-0.117424600985,1.649473221253)); +#20168 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20169,#20170,#20171,#20172), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#20169 = CARTESIAN_POINT('',(2.24,-0.117424600985,1.649473221253)); +#20170 = CARTESIAN_POINT('',(2.24,-0.115033157777,1.646301959608)); +#20171 = CARTESIAN_POINT('',(2.24,-0.1097823803,1.643078710067)); +#20172 = CARTESIAN_POINT('',(2.24,-0.101750250396,1.639855460526)); +#20173 = ORIENTED_EDGE('',*,*,#20174,.F.); +#20174 = EDGE_CURVE('',#20175,#20166,#20177,.T.); +#20175 = VERTEX_POINT('',#20176); +#20176 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.660962546228)); +#20177 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20178,#20179,#20180,#20181), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#20178 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.660962546228)); +#20179 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.656491587187)); +#20180 = CARTESIAN_POINT('',(2.24,-0.119842038141,1.652644482897)); +#20181 = CARTESIAN_POINT('',(2.24,-0.117424600985,1.649473221253)); +#20182 = ORIENTED_EDGE('',*,*,#20183,.F.); +#20183 = EDGE_CURVE('',#20184,#20175,#20186,.T.); +#20184 = VERTEX_POINT('',#20185); +#20185 = CARTESIAN_POINT('',(2.24,-0.112875660101,1.676454939181)); +#20186 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20187,#20188,#20189,#20190), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#20187 = CARTESIAN_POINT('',(2.24,-0.112875660101,1.676454939181)); +#20188 = CARTESIAN_POINT('',(2.24,-0.118308395214,1.672555846995)); +#20189 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.667409045309)); +#20190 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.660962546228)); +#20191 = ORIENTED_EDGE('',*,*,#20192,.F.); +#20192 = EDGE_CURVE('',#20193,#20184,#20195,.T.); +#20193 = VERTEX_POINT('',#20194); +#20194 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.682225595617)); +#20195 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20196,#20197,#20198,#20199), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#20196 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.682225595617)); +#20197 = CARTESIAN_POINT('',(2.24,-0.10071049248,1.682225595617)); +#20198 = CARTESIAN_POINT('',(2.24,-0.10741693104,1.680302043472)); +#20199 = CARTESIAN_POINT('',(2.24,-0.112875660101,1.676454939181)); +#20200 = ORIENTED_EDGE('',*,*,#20201,.F.); +#20201 = EDGE_CURVE('',#20202,#20193,#20204,.T.); +#20202 = VERTEX_POINT('',#20203); +#20203 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.679002346076)); +#20204 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20205,#20206,#20207,#20208), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#20205 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.679002346076)); +#20206 = CARTESIAN_POINT('',(2.24,-8.085111627869E-02,1.6811858377)); +#20207 = CARTESIAN_POINT('',(2.24,-8.656978481851E-02,1.682225595617)); +#20208 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.682225595617)); +#20209 = ORIENTED_EDGE('',*,*,#20210,.F.); +#20210 = EDGE_CURVE('',#20211,#20202,#20213,.T.); +#20211 = VERTEX_POINT('',#20212); +#20212 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.666629226872)); +#20213 = LINE('',#20214,#20215); +#20214 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.679002346076)); +#20215 = VECTOR('',#20216,1.); +#20216 = DIRECTION('',(-0.,-0.,1.)); +#20217 = ORIENTED_EDGE('',*,*,#20218,.F.); +#20218 = EDGE_CURVE('',#20219,#20211,#20221,.T.); +#20219 = VERTEX_POINT('',#20220); +#20220 = CARTESIAN_POINT('',(2.24,-9.400405392002E-02,1.671880004349)); +#20221 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20222,#20223,#20224,#20225), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#20222 = CARTESIAN_POINT('',(2.24,-9.400405392002E-02,1.671880004349)); +#20223 = CARTESIAN_POINT('',(2.24,-8.71156577243E-02,1.671880004349)); +#20224 = CARTESIAN_POINT('',(2.24,-8.098108601809E-02,1.670112415891)); +#20225 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.666629226872)); +#20226 = ORIENTED_EDGE('',*,*,#20227,.F.); +#20227 = EDGE_CURVE('',#20228,#20219,#20230,.T.); +#20228 = VERTEX_POINT('',#20229); +#20229 = CARTESIAN_POINT('',(2.24,-0.104037717812,1.669176633766)); +#20230 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20231,#20232,#20233,#20234), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#20231 = CARTESIAN_POINT('',(2.24,-0.104037717812,1.669176633766)); +#20232 = CARTESIAN_POINT('',(2.24,-0.10146431697,1.67099621012)); +#20233 = CARTESIAN_POINT('',(2.24,-9.811109768929E-02,1.671880004349)); +#20234 = CARTESIAN_POINT('',(2.24,-9.400405392002E-02,1.671880004349)); +#20235 = ORIENTED_EDGE('',*,*,#20236,.F.); +#20236 = EDGE_CURVE('',#20237,#20228,#20239,.T.); +#20237 = VERTEX_POINT('',#20238); +#20238 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.662106279936)); +#20239 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20240,#20241,#20242,#20243), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#20240 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.662106279936)); +#20241 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.665017602101)); +#20242 = CARTESIAN_POINT('',(2.24,-0.106611118655,1.667409045309)); +#20243 = CARTESIAN_POINT('',(2.24,-0.104037717812,1.669176633766)); +#20244 = ORIENTED_EDGE('',*,*,#20245,.F.); +#20245 = EDGE_CURVE('',#20246,#20237,#20248,.T.); +#20246 = VERTEX_POINT('',#20247); +#20247 = CARTESIAN_POINT('',(2.24,-0.105129463625,1.65534785348)); +#20248 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20249,#20250,#20251,#20252), + .UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.),.PIECEWISE_BEZIER_KNOTS.); +#20249 = CARTESIAN_POINT('',(2.24,-0.105129463625,1.65534785348)); +#20250 = CARTESIAN_POINT('',(2.24,-0.106975033926,1.65695947825)); +#20251 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.65919495777)); +#20252 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.662106279936)); +#20253 = ORIENTED_EDGE('',*,*,#20254,.F.); +#20254 = EDGE_CURVE('',#20255,#20246,#20257,.T.); +#20255 = VERTEX_POINT('',#20256); +#20256 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.649109305982)); +#20257 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20258,#20259,#20260,#20261), + .UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.),.PIECEWISE_BEZIER_KNOTS.); +#20258 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.649109305982)); +#20259 = CARTESIAN_POINT('',(2.24,-9.915085560581E-02,1.651604724981)); +#20260 = CARTESIAN_POINT('',(2.24,-0.103257899375,1.653684240814)); +#20261 = CARTESIAN_POINT('',(2.24,-0.105129463625,1.65534785348)); +#20262 = ORIENTED_EDGE('',*,*,#20263,.F.); +#20263 = EDGE_CURVE('',#20264,#20255,#20266,.T.); +#20264 = VERTEX_POINT('',#20265); +#20265 = CARTESIAN_POINT('',(2.24,-7.632816934267E-02,1.639699496839)); +#20266 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20267,#20268,#20269,#20270), + .UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.),.PIECEWISE_BEZIER_KNOTS.); +#20267 = CARTESIAN_POINT('',(2.24,-7.632816934267E-02,1.639699496839)); +#20268 = CARTESIAN_POINT('',(2.24,-7.91875036124E-02,1.64292274638)); +#20269 = CARTESIAN_POINT('',(2.24,-8.464623267308E-02,1.646094008024)); +#20270 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.649109305982)); +#20271 = ORIENTED_EDGE('',*,*,#20272,.F.); +#20272 = EDGE_CURVE('',#20273,#20264,#20275,.T.); +#20273 = VERTEX_POINT('',#20274); +#20274 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.627690292906)); +#20275 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20276,#20277,#20278,#20279), + .UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.),.PIECEWISE_BEZIER_KNOTS.); +#20276 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.627690292906)); +#20277 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.632473179321)); +#20278 = CARTESIAN_POINT('',(2.24,-7.349482902082E-02,1.636476247299)); +#20279 = CARTESIAN_POINT('',(2.24,-7.632816934267E-02,1.639699496839)); +#20280 = ORIENTED_EDGE('',*,*,#20281,.F.); +#20281 = EDGE_CURVE('',#20282,#20273,#20284,.T.); +#20282 = VERTEX_POINT('',#20283); +#20283 = CARTESIAN_POINT('',(2.24,-8.02532554768E-02,1.611989948369)); +#20284 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20285,#20286,#20287,#20288), + .UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.),.PIECEWISE_BEZIER_KNOTS.); +#20285 = CARTESIAN_POINT('',(2.24,-8.02532554768E-02,1.611989948369)); +#20286 = CARTESIAN_POINT('',(2.24,-7.479452641612E-02,1.615785064764)); +#20287 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.621035842241)); +#20288 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.627690292906)); +#20289 = ORIENTED_EDGE('',*,*,#20290,.F.); +#20290 = EDGE_CURVE('',#20291,#20282,#20293,.T.); +#20291 = VERTEX_POINT('',#20292); +#20292 = CARTESIAN_POINT('',(2.24,-0.101412329074,1.606219291934)); +#20293 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20294,#20295,#20296,#20297), + .UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.),.PIECEWISE_BEZIER_KNOTS.); +#20294 = CARTESIAN_POINT('',(2.24,-0.101412329074,1.606219291934)); +#20295 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.606219291934)); +#20296 = CARTESIAN_POINT('',(2.24,-8.56859905896E-02,1.608142844079)); +#20297 = CARTESIAN_POINT('',(2.24,-8.02532554768E-02,1.611989948369)); +#20298 = ORIENTED_EDGE('',*,*,#20299,.F.); +#20299 = EDGE_CURVE('',#20300,#20291,#20302,.T.); +#20300 = VERTEX_POINT('',#20301); +#20301 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.610482299391)); +#20302 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20303,#20304,#20305,#20306), + .UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.),.PIECEWISE_BEZIER_KNOTS.); +#20303 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.610482299391)); +#20304 = CARTESIAN_POINT('',(2.24,-0.11550104884,1.607674953016)); +#20305 = CARTESIAN_POINT('',(2.24,-0.108950573967,1.606219291934)); +#20306 = CARTESIAN_POINT('',(2.24,-0.101412329074,1.606219291934)); +#20307 = ORIENTED_EDGE('',*,*,#20308,.F.); +#20308 = EDGE_CURVE('',#20130,#20300,#20309,.T.); +#20309 = LINE('',#20310,#20311); +#20310 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.610482299391)); +#20311 = VECTOR('',#20312,1.); +#20312 = DIRECTION('',(-0.,-0.,-1.)); +#20313 = FACE_BOUND('',#20314,.T.); +#20314 = EDGE_LOOP('',(#20315,#20325,#20333,#20341,#20349,#20357,#20365, + #20373,#20381,#20389,#20397,#20405)); +#20315 = ORIENTED_EDGE('',*,*,#20316,.F.); +#20316 = EDGE_CURVE('',#20317,#20319,#20321,.T.); +#20317 = VERTEX_POINT('',#20318); +#20318 = CARTESIAN_POINT('',(2.24,7.26951340138E-02,1.607934892496)); +#20319 = VERTEX_POINT('',#20320); +#20320 = CARTESIAN_POINT('',(2.24,7.26951340138E-02,1.619528193263)); +#20321 = LINE('',#20322,#20323); +#20322 = CARTESIAN_POINT('',(2.24,7.26951340138E-02,1.619528193263)); +#20323 = VECTOR('',#20324,1.); +#20324 = DIRECTION('',(-0.,-0.,1.)); +#20325 = ORIENTED_EDGE('',*,*,#20326,.F.); +#20326 = EDGE_CURVE('',#20327,#20317,#20329,.T.); +#20327 = VERTEX_POINT('',#20328); +#20328 = CARTESIAN_POINT('',(2.24,1.800386761547E-02,1.607934892496)); +#20329 = LINE('',#20330,#20331); +#20330 = CARTESIAN_POINT('',(2.24,7.26951340138E-02,1.607934892496)); +#20331 = VECTOR('',#20332,1.); +#20332 = DIRECTION('',(-0.,1.,3.964809169307E-15)); +#20333 = ORIENTED_EDGE('',*,*,#20334,.F.); +#20334 = EDGE_CURVE('',#20335,#20327,#20337,.T.); +#20335 = VERTEX_POINT('',#20336); +#20336 = CARTESIAN_POINT('',(2.24,1.800386761547E-02,1.709623216712)); +#20337 = LINE('',#20338,#20339); +#20338 = CARTESIAN_POINT('',(2.24,1.800386761547E-02,1.607934892496)); +#20339 = VECTOR('',#20340,1.); +#20340 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#20341 = ORIENTED_EDGE('',*,*,#20342,.F.); +#20342 = EDGE_CURVE('',#20343,#20335,#20345,.T.); +#20343 = VERTEX_POINT('',#20344); +#20344 = CARTESIAN_POINT('',(2.24,7.038167264985E-02,1.709623216712)); +#20345 = LINE('',#20346,#20347); +#20346 = CARTESIAN_POINT('',(2.24,1.800386761547E-02,1.709623216712)); +#20347 = VECTOR('',#20348,1.); +#20348 = DIRECTION('',(-0.,-1.,-4.139929772826E-15)); +#20349 = ORIENTED_EDGE('',*,*,#20350,.F.); +#20350 = EDGE_CURVE('',#20351,#20343,#20353,.T.); +#20351 = VERTEX_POINT('',#20352); +#20352 = CARTESIAN_POINT('',(2.24,7.038167264985E-02,1.697925940153)); +#20353 = LINE('',#20354,#20355); +#20354 = CARTESIAN_POINT('',(2.24,7.038167264985E-02,1.709623216712)); +#20355 = VECTOR('',#20356,1.); +#20356 = DIRECTION('',(-0.,-0.,1.)); +#20357 = ORIENTED_EDGE('',*,*,#20358,.F.); +#20358 = EDGE_CURVE('',#20359,#20351,#20361,.T.); +#20359 = VERTEX_POINT('',#20360); +#20360 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.697925940153)); +#20361 = LINE('',#20362,#20363); +#20362 = CARTESIAN_POINT('',(2.24,7.038167264985E-02,1.697925940153)); +#20363 = VECTOR('',#20364,1.); +#20364 = DIRECTION('',(-0.,1.,-0.)); +#20365 = ORIENTED_EDGE('',*,*,#20366,.F.); +#20366 = EDGE_CURVE('',#20367,#20359,#20369,.T.); +#20367 = VERTEX_POINT('',#20368); +#20368 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.665381517372)); +#20369 = LINE('',#20370,#20371); +#20370 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.697925940153)); +#20371 = VECTOR('',#20372,1.); +#20372 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#20373 = ORIENTED_EDGE('',*,*,#20374,.F.); +#20374 = EDGE_CURVE('',#20375,#20367,#20377,.T.); +#20375 = VERTEX_POINT('',#20376); +#20376 = CARTESIAN_POINT('',(2.24,6.74963444319E-02,1.665381517372)); +#20377 = LINE('',#20378,#20379); +#20378 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.665381517372)); +#20379 = VECTOR('',#20380,1.); +#20380 = DIRECTION('',(-0.,-1.,-5.962800923771E-15)); +#20381 = ORIENTED_EDGE('',*,*,#20382,.F.); +#20382 = EDGE_CURVE('',#20383,#20375,#20385,.T.); +#20383 = VERTEX_POINT('',#20384); +#20384 = CARTESIAN_POINT('',(2.24,6.74963444319E-02,1.653736228709)); +#20385 = LINE('',#20386,#20387); +#20386 = CARTESIAN_POINT('',(2.24,6.74963444319E-02,1.665381517372)); +#20387 = VECTOR('',#20388,1.); +#20388 = DIRECTION('',(-0.,-9.310221531588E-15,1.)); +#20389 = ORIENTED_EDGE('',*,*,#20390,.F.); +#20390 = EDGE_CURVE('',#20391,#20383,#20393,.T.); +#20391 = VERTEX_POINT('',#20392); +#20392 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.653736228709)); +#20393 = LINE('',#20394,#20395); +#20394 = CARTESIAN_POINT('',(2.24,6.74963444319E-02,1.653736228709)); +#20395 = VECTOR('',#20396,1.); +#20396 = DIRECTION('',(-0.,1.,5.962800923771E-15)); +#20397 = ORIENTED_EDGE('',*,*,#20398,.F.); +#20398 = EDGE_CURVE('',#20399,#20391,#20401,.T.); +#20399 = VERTEX_POINT('',#20400); +#20400 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.619528193263)); +#20401 = LINE('',#20402,#20403); +#20402 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.653736228709)); +#20403 = VECTOR('',#20404,1.); +#20404 = DIRECTION('',(-0.,-3.169437117125E-15,1.)); +#20405 = ORIENTED_EDGE('',*,*,#20406,.F.); +#20406 = EDGE_CURVE('',#20319,#20399,#20407,.T.); +#20407 = LINE('',#20408,#20409); +#20408 = CARTESIAN_POINT('',(2.24,3.113081130926E-02,1.619528193263)); +#20409 = VECTOR('',#20410,1.); +#20410 = DIRECTION('',(-0.,-1.,-0.)); +#20411 = FACE_BOUND('',#20412,.T.); +#20412 = EDGE_LOOP('',(#20413,#20423,#20431,#20439,#20448,#20457,#20466) + ); +#20413 = ORIENTED_EDGE('',*,*,#20414,.F.); +#20414 = EDGE_CURVE('',#20415,#20417,#20419,.T.); +#20415 = VERTEX_POINT('',#20416); +#20416 = CARTESIAN_POINT('',(2.24,9.190466151804E-02,1.607934892496)); +#20417 = VERTEX_POINT('',#20418); +#20418 = CARTESIAN_POINT('',(2.24,0.119874149467,1.607934892496)); +#20419 = LINE('',#20420,#20421); +#20420 = CARTESIAN_POINT('',(2.24,0.119874149467,1.607934892496)); +#20421 = VECTOR('',#20422,1.); +#20422 = DIRECTION('',(-0.,1.,-0.)); +#20423 = ORIENTED_EDGE('',*,*,#20424,.F.); +#20424 = EDGE_CURVE('',#20425,#20415,#20427,.T.); +#20425 = VERTEX_POINT('',#20426); +#20426 = CARTESIAN_POINT('',(2.24,9.190466151804E-02,1.709623216712)); +#20427 = LINE('',#20428,#20429); +#20428 = CARTESIAN_POINT('',(2.24,9.190466151804E-02,1.607934892496)); +#20429 = VECTOR('',#20430,1.); +#20430 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#20431 = ORIENTED_EDGE('',*,*,#20432,.F.); +#20432 = EDGE_CURVE('',#20433,#20425,#20435,.T.); +#20433 = VERTEX_POINT('',#20434); +#20434 = CARTESIAN_POINT('',(2.24,0.120913907383,1.709623216712)); +#20435 = LINE('',#20436,#20437); +#20436 = CARTESIAN_POINT('',(2.24,9.190466151804E-02,1.709623216712)); +#20437 = VECTOR('',#20438,1.); +#20438 = DIRECTION('',(-0.,-1.,-0.)); +#20439 = ORIENTED_EDGE('',*,*,#20440,.F.); +#20440 = EDGE_CURVE('',#20441,#20433,#20443,.T.); +#20441 = VERTEX_POINT('',#20442); +#20442 = CARTESIAN_POINT('',(2.24,0.159358956338,1.696158351695)); +#20443 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20444,#20445,#20446,#20447), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#20444 = CARTESIAN_POINT('',(2.24,0.159358956338,1.696158351695)); +#20445 = CARTESIAN_POINT('',(2.24,0.149143334811,1.705152257671)); +#20446 = CARTESIAN_POINT('',(2.24,0.136328318492,1.709623216712)); +#20447 = CARTESIAN_POINT('',(2.24,0.120913907383,1.709623216712)); +#20448 = ORIENTED_EDGE('',*,*,#20449,.F.); +#20449 = EDGE_CURVE('',#20450,#20441,#20452,.T.); +#20450 = VERTEX_POINT('',#20451); +#20451 = CARTESIAN_POINT('',(2.24,0.174695385605,1.660078751999)); +#20452 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20453,#20454,#20455,#20456), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#20453 = CARTESIAN_POINT('',(2.24,0.174695385605,1.660078751999)); +#20454 = CARTESIAN_POINT('',(2.24,0.174695385605,1.675155241785)); +#20455 = CARTESIAN_POINT('',(2.24,0.169574577866,1.687164445719)); +#20456 = CARTESIAN_POINT('',(2.24,0.159358956338,1.696158351695)); +#20457 = ORIENTED_EDGE('',*,*,#20458,.F.); +#20458 = EDGE_CURVE('',#20459,#20450,#20461,.T.); +#20459 = VERTEX_POINT('',#20460); +#20460 = CARTESIAN_POINT('',(2.24,0.159358956338,1.622179575949)); +#20461 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20462,#20463,#20464,#20465), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#20462 = CARTESIAN_POINT('',(2.24,0.159358956338,1.622179575949)); +#20463 = CARTESIAN_POINT('',(2.24,0.169574577866,1.631693360884)); +#20464 = CARTESIAN_POINT('',(2.24,0.174695385605,1.644326419566)); +#20465 = CARTESIAN_POINT('',(2.24,0.174695385605,1.660078751999)); +#20466 = ORIENTED_EDGE('',*,*,#20467,.F.); +#20467 = EDGE_CURVE('',#20417,#20459,#20468,.T.); +#20468 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20469,#20470,#20471,#20472), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#20469 = CARTESIAN_POINT('',(2.24,0.119874149467,1.607934892496)); +#20470 = CARTESIAN_POINT('',(2.24,0.135964403222,1.607934892496)); +#20471 = CARTESIAN_POINT('',(2.24,0.149143334811,1.612665791015)); +#20472 = CARTESIAN_POINT('',(2.24,0.159358956338,1.622179575949)); +#20473 = FACE_BOUND('',#20474,.T.); +#20474 = EDGE_LOOP('',(#20475,#20485,#20493,#20501,#20509,#20517,#20525, + #20533)); +#20475 = ORIENTED_EDGE('',*,*,#20476,.F.); +#20476 = EDGE_CURVE('',#20477,#20479,#20481,.T.); +#20477 = VERTEX_POINT('',#20478); +#20478 = CARTESIAN_POINT('',(2.24,0.271834768936,1.607934892496)); +#20479 = VERTEX_POINT('',#20480); +#20480 = CARTESIAN_POINT('',(2.24,0.233103786554,1.709623216712)); +#20481 = LINE('',#20482,#20483); +#20482 = CARTESIAN_POINT('',(2.24,0.233103786554,1.709623216712)); +#20483 = VECTOR('',#20484,1.); +#20484 = DIRECTION('',(-0.,-0.355935724364,0.934510438744)); +#20485 = ORIENTED_EDGE('',*,*,#20486,.F.); +#20486 = EDGE_CURVE('',#20487,#20477,#20489,.T.); +#20487 = VERTEX_POINT('',#20488); +#20488 = CARTESIAN_POINT('',(2.24,0.257330146004,1.607934892496)); +#20489 = LINE('',#20490,#20491); +#20490 = CARTESIAN_POINT('',(2.24,0.271834768936,1.607934892496)); +#20491 = VECTOR('',#20492,1.); +#20492 = DIRECTION('',(-0.,1.,1.494974640245E-14)); +#20493 = ORIENTED_EDGE('',*,*,#20494,.F.); +#20494 = EDGE_CURVE('',#20495,#20487,#20497,.T.); +#20495 = VERTEX_POINT('',#20496); +#20496 = CARTESIAN_POINT('',(2.24,0.246958560788,1.635748416757)); +#20497 = LINE('',#20498,#20499); +#20498 = CARTESIAN_POINT('',(2.24,0.257330146004,1.607934892496)); +#20499 = VECTOR('',#20500,1.); +#20500 = DIRECTION('',(-0.,0.349395479497,-0.936975345944)); +#20501 = ORIENTED_EDGE('',*,*,#20502,.F.); +#20502 = EDGE_CURVE('',#20503,#20495,#20505,.T.); +#20503 = VERTEX_POINT('',#20504); +#20504 = CARTESIAN_POINT('',(2.24,0.204614419646,1.635748416757)); +#20505 = LINE('',#20506,#20507); +#20506 = CARTESIAN_POINT('',(2.24,0.246958560788,1.635748416757)); +#20507 = VECTOR('',#20508,1.); +#20508 = DIRECTION('',(-0.,1.,-0.)); +#20509 = ORIENTED_EDGE('',*,*,#20510,.F.); +#20510 = EDGE_CURVE('',#20511,#20503,#20513,.T.); +#20511 = VERTEX_POINT('',#20512); +#20512 = CARTESIAN_POINT('',(2.24,0.194840695233,1.607934892496)); +#20513 = LINE('',#20514,#20515); +#20514 = CARTESIAN_POINT('',(2.24,0.204614419646,1.635748416757)); +#20515 = VECTOR('',#20516,1.); +#20516 = DIRECTION('',(-0.,0.331528418358,0.94344523308)); +#20517 = ORIENTED_EDGE('',*,*,#20518,.F.); +#20518 = EDGE_CURVE('',#20519,#20511,#20521,.T.); +#20519 = VERTEX_POINT('',#20520); +#20520 = CARTESIAN_POINT('',(2.24,0.1803360723,1.607934892496)); +#20521 = LINE('',#20522,#20523); +#20522 = CARTESIAN_POINT('',(2.24,0.194840695233,1.607934892496)); +#20523 = VECTOR('',#20524,1.); +#20524 = DIRECTION('',(-0.,1.,-0.)); +#20525 = ORIENTED_EDGE('',*,*,#20526,.F.); +#20526 = EDGE_CURVE('',#20527,#20519,#20529,.T.); +#20527 = VERTEX_POINT('',#20528); +#20528 = CARTESIAN_POINT('',(2.24,0.219067054683,1.709623216712)); +#20529 = LINE('',#20530,#20531); +#20530 = CARTESIAN_POINT('',(2.24,0.1803360723,1.607934892496)); +#20531 = VECTOR('',#20532,1.); +#20532 = DIRECTION('',(-0.,-0.35593572437,-0.934510438742)); +#20533 = ORIENTED_EDGE('',*,*,#20534,.F.); +#20534 = EDGE_CURVE('',#20479,#20527,#20535,.T.); +#20535 = LINE('',#20536,#20537); +#20536 = CARTESIAN_POINT('',(2.24,0.219067054683,1.709623216712)); +#20537 = VECTOR('',#20538,1.); +#20538 = DIRECTION('',(-0.,-1.,-0.)); +#20539 = FACE_BOUND('',#20540,.T.); +#20540 = EDGE_LOOP('',(#20541,#20552,#20561,#20570,#20578,#20587,#20596, + #20605,#20613,#20622,#20631,#20640,#20649,#20658,#20667,#20676, + #20685,#20694,#20703,#20711,#20719,#20727,#20736,#20745,#20754, + #20763,#20772,#20781,#20790,#20799,#20808,#20817,#20826)); +#20541 = ORIENTED_EDGE('',*,*,#20542,.F.); +#20542 = EDGE_CURVE('',#20543,#20545,#20547,.T.); +#20543 = VERTEX_POINT('',#20544); +#20544 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.708801322715)); +#20545 = VERTEX_POINT('',#20546); +#20546 = CARTESIAN_POINT('',(2.24,-0.418471677562,1.803513457566)); +#20547 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20548,#20549,#20550,#20551), + .UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.),.PIECEWISE_BEZIER_KNOTS.); +#20548 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.708801322715)); +#20549 = CARTESIAN_POINT('',(2.24,-0.34761831172,1.752180910252)); +#20550 = CARTESIAN_POINT('',(2.24,-0.377261065265,1.790499578546)); +#20551 = CARTESIAN_POINT('',(2.24,-0.418471677562,1.803513457566)); +#20552 = ORIENTED_EDGE('',*,*,#20553,.F.); +#20553 = EDGE_CURVE('',#20554,#20543,#20556,.T.); +#20554 = VERTEX_POINT('',#20555); +#20555 = CARTESIAN_POINT('',(2.24,-0.373646097339,1.640116932113)); +#20556 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20557,#20558,#20559,#20560), + .UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.),.PIECEWISE_BEZIER_KNOTS.); +#20557 = CARTESIAN_POINT('',(2.24,-0.373646097339,1.640116932113)); +#20558 = CARTESIAN_POINT('',(2.24,-0.356294240259,1.658914754298)); +#20559 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.68349654723)); +#20560 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.708801322715)); +#20561 = ORIENTED_EDGE('',*,*,#20562,.F.); +#20562 = EDGE_CURVE('',#20563,#20554,#20565,.T.); +#20563 = VERTEX_POINT('',#20564); +#20564 = CARTESIAN_POINT('',(2.24,-0.439438502567,1.607582220775)); +#20565 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20566,#20567,#20568,#20569), + .UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.),.PIECEWISE_BEZIER_KNOTS.); +#20566 = CARTESIAN_POINT('',(2.24,-0.439438502567,1.607582220775)); +#20567 = CARTESIAN_POINT('',(2.24,-0.414133727083,1.609751196015)); +#20568 = CARTESIAN_POINT('',(2.24,-0.390997926837,1.621319109928)); +#20569 = CARTESIAN_POINT('',(2.24,-0.373646097339,1.640116932113)); +#20570 = ORIENTED_EDGE('',*,*,#20571,.F.); +#20571 = EDGE_CURVE('',#20572,#20563,#20574,.T.); +#20572 = VERTEX_POINT('',#20573); +#20573 = CARTESIAN_POINT('',(2.24,-0.482095107551,1.607582220775)); +#20574 = LINE('',#20575,#20576); +#20575 = CARTESIAN_POINT('',(2.24,-0.441607477807,1.607582220775)); +#20576 = VECTOR('',#20577,1.); +#20577 = DIRECTION('',(0.,1.,0.)); +#20578 = ORIENTED_EDGE('',*,*,#20579,.F.); +#20579 = EDGE_CURVE('',#20580,#20572,#20582,.T.); +#20580 = VERTEX_POINT('',#20581); +#20581 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.629995010887)); +#20582 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20583,#20584,#20585,#20586), + .UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.),.PIECEWISE_BEZIER_KNOTS.); +#20583 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.629995010887)); +#20584 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.618427124554)); +#20585 = CARTESIAN_POINT('',(2.24,-0.493663021464,1.608305203328)); +#20586 = CARTESIAN_POINT('',(2.24,-0.482095107551,1.607582220775)); +#20587 = ORIENTED_EDGE('',*,*,#20588,.F.); +#20588 = EDGE_CURVE('',#20589,#20580,#20591,.T.); +#20589 = VERTEX_POINT('',#20590); +#20590 = CARTESIAN_POINT('',(2.24,-0.480649142445,1.652407800999)); +#20591 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20592,#20593,#20594,#20595), + .UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.),.PIECEWISE_BEZIER_KNOTS.); +#20592 = CARTESIAN_POINT('',(2.24,-0.480649142445,1.652407800999)); +#20593 = CARTESIAN_POINT('',(2.24,-0.492940038911,1.652407800999)); +#20594 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.642285879773)); +#20595 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.629995010887)); +#20596 = ORIENTED_EDGE('',*,*,#20597,.F.); +#20597 = EDGE_CURVE('',#20598,#20589,#20600,.T.); +#20598 = VERTEX_POINT('',#20599); +#20599 = CARTESIAN_POINT('',(2.24,-0.476311191965,1.651684818446)); +#20600 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20601,#20602,#20603,#20604), + .UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.),.PIECEWISE_BEZIER_KNOTS.); +#20601 = CARTESIAN_POINT('',(2.24,-0.476311191965,1.651684818446)); +#20602 = CARTESIAN_POINT('',(2.24,-0.477757184652,1.651684818446)); +#20603 = CARTESIAN_POINT('',(2.24,-0.479203177338,1.652407800999)); +#20604 = CARTESIAN_POINT('',(2.24,-0.480649142445,1.652407800999)); +#20605 = ORIENTED_EDGE('',*,*,#20606,.F.); +#20606 = EDGE_CURVE('',#20607,#20598,#20609,.T.); +#20607 = VERTEX_POINT('',#20608); +#20608 = CARTESIAN_POINT('',(2.24,-0.443776480627,1.651684818446)); +#20609 = LINE('',#20610,#20611); +#20610 = CARTESIAN_POINT('',(2.24,-0.443776480627,1.651684818446)); +#20611 = VECTOR('',#20612,1.); +#20612 = DIRECTION('',(0.,-1.,-6.664894986924E-15)); +#20613 = ORIENTED_EDGE('',*,*,#20614,.F.); +#20614 = EDGE_CURVE('',#20615,#20607,#20617,.T.); +#20615 = VERTEX_POINT('',#20616); +#20616 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.708078312582)); +#20617 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20618,#20619,#20620,#20621), + .UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.),.PIECEWISE_BEZIER_KNOTS.); +#20618 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.708078312582)); +#20619 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.678435572827)); +#20620 = CARTESIAN_POINT('',(2.24,-0.414133727083,1.653853793686)); +#20621 = CARTESIAN_POINT('',(2.24,-0.443776480627,1.651684818446)); +#20622 = ORIENTED_EDGE('',*,*,#20623,.F.); +#20623 = EDGE_CURVE('',#20624,#20615,#20626,.T.); +#20624 = VERTEX_POINT('',#20625); +#20625 = CARTESIAN_POINT('',(2.24,-0.448114431107,1.764471806718)); +#20626 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20627,#20628,#20629,#20630), + .UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.),.PIECEWISE_BEZIER_KNOTS.); +#20627 = CARTESIAN_POINT('',(2.24,-0.448114431107,1.764471806718)); +#20628 = CARTESIAN_POINT('',(2.24,-0.417025712456,1.764471806718)); +#20629 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.739167031233)); +#20630 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.708078312582)); +#20631 = ORIENTED_EDGE('',*,*,#20632,.F.); +#20632 = EDGE_CURVE('',#20633,#20624,#20635,.T.); +#20633 = VERTEX_POINT('',#20634); +#20634 = CARTESIAN_POINT('',(2.24,-0.453898374273,1.764471806718)); +#20635 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20636,#20637,#20638,#20639), + .UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.),.PIECEWISE_BEZIER_KNOTS.); +#20636 = CARTESIAN_POINT('',(2.24,-0.453898374273,1.764471806718)); +#20637 = CARTESIAN_POINT('',(2.24,-0.451729399033,1.764471806718)); +#20638 = CARTESIAN_POINT('',(2.24,-0.450283406347,1.764471806718)); +#20639 = CARTESIAN_POINT('',(2.24,-0.448114431107,1.764471806718)); +#20640 = ORIENTED_EDGE('',*,*,#20641,.F.); +#20641 = EDGE_CURVE('',#20642,#20633,#20644,.T.); +#20642 = VERTEX_POINT('',#20643); +#20643 = CARTESIAN_POINT('',(2.24,-0.555117476213,1.854846004879)); +#20644 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20645,#20646,#20647,#20648), + .UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.),.PIECEWISE_BEZIER_KNOTS.); +#20645 = CARTESIAN_POINT('',(2.24,-0.555117476213,1.854846004879)); +#20646 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.854846004879)); +#20647 = CARTESIAN_POINT('',(2.24,-0.45968231744,1.815081357688)); +#20648 = CARTESIAN_POINT('',(2.24,-0.453898374273,1.764471806718)); +#20649 = ORIENTED_EDGE('',*,*,#20650,.F.); +#20650 = EDGE_CURVE('',#20651,#20642,#20653,.T.); +#20651 = VERTEX_POINT('',#20652); +#20652 = CARTESIAN_POINT('',(2.24,-0.651998600094,1.785438659303)); +#20653 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20654,#20655,#20656,#20657), + .UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.),.PIECEWISE_BEZIER_KNOTS.); +#20654 = CARTESIAN_POINT('',(2.24,-0.651998600094,1.785438659303)); +#20655 = CARTESIAN_POINT('',(2.24,-0.638261738521,1.825926261468)); +#20656 = CARTESIAN_POINT('',(2.24,-0.600666066571,1.854846004879)); +#20657 = CARTESIAN_POINT('',(2.24,-0.555117476213,1.854846004879)); +#20658 = ORIENTED_EDGE('',*,*,#20659,.F.); +#20659 = EDGE_CURVE('',#20660,#20651,#20662,.T.); +#20660 = VERTEX_POINT('',#20661); +#20661 = CARTESIAN_POINT('',(2.24,-0.690317254598,1.796283563083)); +#20662 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20663,#20664,#20665,#20666), + .UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.),.PIECEWISE_BEZIER_KNOTS.); +#20663 = CARTESIAN_POINT('',(2.24,-0.690317254598,1.796283563083)); +#20664 = CARTESIAN_POINT('',(2.24,-0.676580379235,1.796283563083)); +#20665 = CARTESIAN_POINT('',(2.24,-0.662843503873,1.791945598813)); +#20666 = CARTESIAN_POINT('',(2.24,-0.651998600094,1.785438659303)); +#20667 = ORIENTED_EDGE('',*,*,#20668,.F.); +#20668 = EDGE_CURVE('',#20669,#20660,#20671,.T.); +#20669 = VERTEX_POINT('',#20670); +#20670 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.723984204554)); +#20671 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20672,#20673,#20674,#20675), + .UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.),.PIECEWISE_BEZIER_KNOTS.); +#20672 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.723984204554)); +#20673 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.763748851745)); +#20674 = CARTESIAN_POINT('',(2.24,-0.730081901789,1.796283563083)); +#20675 = CARTESIAN_POINT('',(2.24,-0.690317254598,1.796283563083)); +#20676 = ORIENTED_EDGE('',*,*,#20677,.F.); +#20677 = EDGE_CURVE('',#20678,#20669,#20680,.T.); +#20678 = VERTEX_POINT('',#20679); +#20679 = CARTESIAN_POINT('',(2.24,-0.719236998009,1.657468789192)); +#20680 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20681,#20682,#20683,#20684), + .UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.),.PIECEWISE_BEZIER_KNOTS.); +#20681 = CARTESIAN_POINT('',(2.24,-0.719236998009,1.657468789192)); +#20682 = CARTESIAN_POINT('',(2.24,-0.744541773494,1.669036689314)); +#20683 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.694341464799)); +#20684 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.723984204554)); +#20685 = ORIENTED_EDGE('',*,*,#20686,.F.); +#20686 = EDGE_CURVE('',#20687,#20678,#20689,.T.); +#20687 = VERTEX_POINT('',#20688); +#20688 = CARTESIAN_POINT('',(2.24,-0.65127560375,1.705186368579)); +#20689 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20690,#20691,#20692,#20693), + .UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.),.PIECEWISE_BEZIER_KNOTS.); +#20690 = CARTESIAN_POINT('',(2.24,-0.65127560375,1.705186368579)); +#20691 = CARTESIAN_POINT('',(2.24,-0.682364336192,1.705186368579)); +#20692 = CARTESIAN_POINT('',(2.24,-0.709115090573,1.684942553707)); +#20693 = CARTESIAN_POINT('',(2.24,-0.719236998009,1.657468789192)); +#20694 = ORIENTED_EDGE('',*,*,#20695,.F.); +#20695 = EDGE_CURVE('',#20696,#20687,#20698,.T.); +#20696 = VERTEX_POINT('',#20697); +#20697 = CARTESIAN_POINT('',(2.24,-0.597051084854,1.680604589437)); +#20698 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20699,#20700,#20701,#20702), + .UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.),.PIECEWISE_BEZIER_KNOTS.); +#20699 = CARTESIAN_POINT('',(2.24,-0.597051084854,1.680604589437)); +#20700 = CARTESIAN_POINT('',(2.24,-0.610064963873,1.695787457486)); +#20701 = CARTESIAN_POINT('',(2.24,-0.629585796192,1.705186368579)); +#20702 = CARTESIAN_POINT('',(2.24,-0.65127560375,1.705186368579)); +#20703 = ORIENTED_EDGE('',*,*,#20704,.F.); +#20704 = EDGE_CURVE('',#20705,#20696,#20707,.T.); +#20705 = VERTEX_POINT('',#20706); +#20706 = CARTESIAN_POINT('',(2.24,-0.500169947184,1.731214140407)); +#20707 = LINE('',#20708,#20709); +#20708 = CARTESIAN_POINT('',(2.24,-0.500169947184,1.731214140407)); +#20709 = VECTOR('',#20710,1.); +#20710 = DIRECTION('',(0.,-0.886348842796,-0.463018065387)); +#20711 = ORIENTED_EDGE('',*,*,#20712,.F.); +#20712 = EDGE_CURVE('',#20713,#20705,#20715,.T.); +#20713 = VERTEX_POINT('',#20714); +#20714 = CARTESIAN_POINT('',(2.24,-0.477757157072,1.692895472113)); +#20715 = LINE('',#20716,#20717); +#20716 = CARTESIAN_POINT('',(2.24,-0.477757157072,1.692895472113)); +#20717 = VECTOR('',#20718,1.); +#20718 = DIRECTION('',(0.,-0.50488304865,0.863187758941)); +#20719 = ORIENTED_EDGE('',*,*,#20720,.F.); +#20720 = EDGE_CURVE('',#20721,#20713,#20723,.T.); +#20721 = VERTEX_POINT('',#20722); +#20722 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.63939394956)); +#20723 = LINE('',#20724,#20725); +#20724 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.63939394956)); +#20725 = VECTOR('',#20726,1.); +#20726 = DIRECTION('',(0.,0.884094950248,0.467307306755)); +#20727 = ORIENTED_EDGE('',*,*,#20728,.F.); +#20728 = EDGE_CURVE('',#20729,#20721,#20731,.T.); +#20729 = VERTEX_POINT('',#20730); +#20730 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.632164013706)); +#20731 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20732,#20733,#20734,#20735), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#20732 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.632164013706)); +#20733 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.634332988947)); +#20734 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.636501964187)); +#20735 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.63939394956)); +#20736 = ORIENTED_EDGE('',*,*,#20737,.F.); +#20737 = EDGE_CURVE('',#20738,#20729,#20740,.T.); +#20738 = VERTEX_POINT('',#20739); +#20739 = CARTESIAN_POINT('',(2.24,-0.65127561754,1.559864655178)); +#20740 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20741,#20742,#20743,#20744), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#20741 = CARTESIAN_POINT('',(2.24,-0.65127561754,1.559864655178)); +#20742 = CARTESIAN_POINT('',(2.24,-0.61151097035,1.559864655178)); +#20743 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.592399366516)); +#20744 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.632164013706)); +#20745 = ORIENTED_EDGE('',*,*,#20746,.F.); +#20746 = EDGE_CURVE('',#20747,#20738,#20749,.T.); +#20747 = VERTEX_POINT('',#20748); +#20748 = CARTESIAN_POINT('',(2.24,-0.719960015038,1.609028213462)); +#20749 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20750,#20751,#20752,#20753), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#20750 = CARTESIAN_POINT('',(2.24,-0.719960015038,1.609028213462)); +#20751 = CARTESIAN_POINT('',(2.24,-0.71056109705,1.58010847005)); +#20752 = CARTESIAN_POINT('',(2.24,-0.683087346325,1.559864655178)); +#20753 = CARTESIAN_POINT('',(2.24,-0.65127561754,1.559864655178)); +#20754 = ORIENTED_EDGE('',*,*,#20755,.F.); +#20755 = EDGE_CURVE('',#20756,#20747,#20758,.T.); +#20756 = VERTEX_POINT('',#20757); +#20757 = CARTESIAN_POINT('',(2.24,-0.77779950186,1.643731900039)); +#20758 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20759,#20760,#20761,#20762), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#20759 = CARTESIAN_POINT('',(2.24,-0.77779950186,1.643731900039)); +#20760 = CARTESIAN_POINT('',(2.24,-0.761893644364,1.62638004296)); +#20761 = CARTESIAN_POINT('',(2.24,-0.742372812045,1.614812156628)); +#20762 = CARTESIAN_POINT('',(2.24,-0.719960015038,1.609028213462)); +#20763 = ORIENTED_EDGE('',*,*,#20764,.F.); +#20764 = EDGE_CURVE('',#20765,#20756,#20767,.T.); +#20765 = VERTEX_POINT('',#20766); +#20766 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.722538184288)); +#20767 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20768,#20769,#20770,#20771), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#20768 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.722538184288)); +#20769 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.693618440876)); +#20770 = CARTESIAN_POINT('',(2.24,-0.797320327285,1.665421680018)); +#20771 = CARTESIAN_POINT('',(2.24,-0.77779950186,1.643731900039)); +#20772 = ORIENTED_EDGE('',*,*,#20773,.F.); +#20773 = EDGE_CURVE('',#20774,#20765,#20776,.T.); +#20774 = VERTEX_POINT('',#20775); +#20775 = CARTESIAN_POINT('',(2.24,-0.774184513249,1.804959443357)); +#20776 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20777,#20778,#20779,#20780), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#20777 = CARTESIAN_POINT('',(2.24,-0.774184513249,1.804959443357)); +#20778 = CARTESIAN_POINT('',(2.24,-0.795874339769,1.783269642694)); +#20779 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.753626902939)); +#20780 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.722538184288)); +#20781 = ORIENTED_EDGE('',*,*,#20782,.F.); +#20782 = EDGE_CURVE('',#20783,#20774,#20785,.T.); +#20783 = VERTEX_POINT('',#20784); +#20784 = CARTESIAN_POINT('',(2.24,-0.691040250941,1.83966313683)); +#20785 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20786,#20787,#20788,#20789), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#20786 = CARTESIAN_POINT('',(2.24,-0.691040250941,1.83966313683)); +#20787 = CARTESIAN_POINT('',(2.24,-0.722128976488,1.83966313683)); +#20788 = CARTESIAN_POINT('',(2.24,-0.751771709347,1.82737224726)); +#20789 = CARTESIAN_POINT('',(2.24,-0.774184513249,1.804959443357)); +#20790 = ORIENTED_EDGE('',*,*,#20791,.F.); +#20791 = EDGE_CURVE('',#20792,#20783,#20794,.T.); +#20792 = VERTEX_POINT('',#20793); +#20793 = CARTESIAN_POINT('',(2.24,-0.674411403996,1.838217151039)); +#20794 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20795,#20796,#20797,#20798), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#20795 = CARTESIAN_POINT('',(2.24,-0.674411403996,1.838217151039)); +#20796 = CARTESIAN_POINT('',(2.24,-0.680195347162,1.838940147382)); +#20797 = CARTESIAN_POINT('',(2.24,-0.685256307775,1.83966313683)); +#20798 = CARTESIAN_POINT('',(2.24,-0.691040250941,1.83966313683)); +#20799 = ORIENTED_EDGE('',*,*,#20800,.F.); +#20800 = EDGE_CURVE('',#20801,#20792,#20803,.T.); +#20801 = VERTEX_POINT('',#20802); +#20802 = CARTESIAN_POINT('',(2.24,-0.642599689001,1.87002886948)); +#20803 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20804,#20805,#20806,#20807), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#20804 = CARTESIAN_POINT('',(2.24,-0.642599689001,1.87002886948)); +#20805 = CARTESIAN_POINT('',(2.24,-0.654890585467,1.861352944388)); +#20806 = CARTESIAN_POINT('',(2.24,-0.665012492903,1.85050804061)); +#20807 = CARTESIAN_POINT('',(2.24,-0.674411403996,1.838217151039)); +#20808 = ORIENTED_EDGE('',*,*,#20809,.F.); +#20809 = EDGE_CURVE('',#20810,#20801,#20812,.T.); +#20810 = VERTEX_POINT('',#20811); +#20811 = CARTESIAN_POINT('',(2.24,-0.555840458767,1.898225619996)); +#20812 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20813,#20814,#20815,#20816), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#20813 = CARTESIAN_POINT('',(2.24,-0.555840458767,1.898225619996)); +#20814 = CARTESIAN_POINT('',(2.24,-0.587652173761,1.898225619996)); +#20815 = CARTESIAN_POINT('',(2.24,-0.617294913516,1.888103709975)); +#20816 = CARTESIAN_POINT('',(2.24,-0.642599689001,1.87002886948)); +#20817 = ORIENTED_EDGE('',*,*,#20818,.F.); +#20818 = EDGE_CURVE('',#20819,#20810,#20821,.T.); +#20819 = VERTEX_POINT('',#20820); +#20820 = CARTESIAN_POINT('',(2.24,-0.4575133422,1.860629951492)); +#20821 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20822,#20823,#20824,#20825), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#20822 = CARTESIAN_POINT('',(2.24,-0.4575133422,1.860629951492)); +#20823 = CARTESIAN_POINT('',(2.24,-0.484987092925,1.884488742048)); +#20824 = CARTESIAN_POINT('',(2.24,-0.519690779503,1.898225619996)); +#20825 = CARTESIAN_POINT('',(2.24,-0.555840458767,1.898225619996)); +#20826 = ORIENTED_EDGE('',*,*,#20827,.F.); +#20827 = EDGE_CURVE('',#20545,#20819,#20828,.T.); +#20828 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#20829,#20830,#20831,#20832), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#20829 = CARTESIAN_POINT('',(2.24,-0.418471677562,1.803513457566)); +#20830 = CARTESIAN_POINT('',(2.24,-0.426424595968,1.825203265124)); +#20831 = CARTESIAN_POINT('',(2.24,-0.440161485121,1.844724090548)); +#20832 = CARTESIAN_POINT('',(2.24,-0.4575133422,1.860629951492)); +#20833 = PLANE('',#20834); +#20834 = AXIS2_PLACEMENT_3D('',#20835,#20836,#20837); +#20835 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#20836 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#20837 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#20838 = ADVANCED_FACE('',(#20839,#20849),#21187,.T.); +#20839 = FACE_BOUND('',#20840,.T.); +#20840 = EDGE_LOOP('',(#20841,#20842)); +#20841 = ORIENTED_EDGE('',*,*,#19168,.T.); +#20842 = ORIENTED_EDGE('',*,*,#20843,.T.); +#20843 = EDGE_CURVE('',#19169,#19161,#20844,.T.); +#20844 = CIRCLE('',#20845,1.1); +#20845 = AXIS2_PLACEMENT_3D('',#20846,#20847,#20848); +#20846 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.05,1.75)); +#20847 = DIRECTION('',(0.,-1.,0.)); +#20848 = DIRECTION('',(0.,0.,-1.)); +#20849 = FACE_BOUND('',#20850,.T.); +#20850 = EDGE_LOOP('',(#20851,#20861,#20869,#20878,#20886,#20895,#20903, + #20912,#20920,#20929,#20937,#20946,#20954,#20963,#20971,#20980, + #20988,#20997,#21005,#21013,#21021,#21030,#21038,#21047,#21055, + #21064,#21072,#21081,#21089,#21098,#21106,#21115,#21123,#21132, + #21140,#21149,#21157,#21165,#21173,#21181)); +#20851 = ORIENTED_EDGE('',*,*,#20852,.F.); +#20852 = EDGE_CURVE('',#20853,#20855,#20857,.T.); +#20853 = VERTEX_POINT('',#20854); +#20854 = CARTESIAN_POINT('',(2.09,-1.05,0.8)); +#20855 = VERTEX_POINT('',#20856); +#20856 = CARTESIAN_POINT('',(2.09,-1.05,2.7)); +#20857 = LINE('',#20858,#20859); +#20858 = CARTESIAN_POINT('',(2.09,-1.05,0.95)); +#20859 = VECTOR('',#20860,1.); +#20860 = DIRECTION('',(0.,0.,1.)); +#20861 = ORIENTED_EDGE('',*,*,#20862,.F.); +#20862 = EDGE_CURVE('',#20863,#20853,#20865,.T.); +#20863 = VERTEX_POINT('',#20864); +#20864 = CARTESIAN_POINT('',(2.09,-1.05,0.732300462574)); +#20865 = LINE('',#20866,#20867); +#20866 = CARTESIAN_POINT('',(2.09,-1.05,0.95)); +#20867 = VECTOR('',#20868,1.); +#20868 = DIRECTION('',(-0.,-0.,1.)); +#20869 = ORIENTED_EDGE('',*,*,#20870,.T.); +#20870 = EDGE_CURVE('',#20863,#20871,#20873,.T.); +#20871 = VERTEX_POINT('',#20872); +#20872 = CARTESIAN_POINT('',(2.146846924741,-1.05,0.614731314538)); +#20873 = CIRCLE('',#20874,0.15); +#20874 = AXIS2_PLACEMENT_3D('',#20875,#20876,#20877); +#20875 = CARTESIAN_POINT('',(2.24,-1.05,0.732300462574)); +#20876 = DIRECTION('',(0.,-1.,0.)); +#20877 = DIRECTION('',(0.,0.,1.)); +#20878 = ORIENTED_EDGE('',*,*,#20879,.F.); +#20879 = EDGE_CURVE('',#20880,#20871,#20882,.T.); +#20880 = VERTEX_POINT('',#20881); +#20881 = CARTESIAN_POINT('',(2.245041221804,-1.05,0.536929434563)); +#20882 = LINE('',#20883,#20884); +#20883 = CARTESIAN_POINT('',(2.09,-1.05,0.659772602556)); +#20884 = VECTOR('',#20885,1.); +#20885 = DIRECTION('',(-0.783794320238,-0.,0.621020501725)); +#20886 = ORIENTED_EDGE('',*,*,#20887,.T.); +#20887 = EDGE_CURVE('',#20880,#20888,#20890,.T.); +#20888 = VERTEX_POINT('',#20889); +#20889 = CARTESIAN_POINT('',(2.301888146546,-1.05,0.419360286527)); +#20890 = CIRCLE('',#20891,0.15); +#20891 = AXIS2_PLACEMENT_3D('',#20892,#20893,#20894); +#20892 = CARTESIAN_POINT('',(2.151888146546,-1.05,0.419360286527)); +#20893 = DIRECTION('',(-0.,1.,0.)); +#20894 = DIRECTION('',(0.,0.,1.)); +#20895 = ORIENTED_EDGE('',*,*,#20896,.F.); +#20896 = EDGE_CURVE('',#20897,#20888,#20899,.T.); +#20897 = VERTEX_POINT('',#20898); +#20898 = CARTESIAN_POINT('',(2.301888146546,-1.05,0.15)); +#20899 = LINE('',#20900,#20901); +#20900 = CARTESIAN_POINT('',(2.301888146546,-1.05,0.491888146546)); +#20901 = VECTOR('',#20902,1.); +#20902 = DIRECTION('',(-0.,-0.,1.)); +#20903 = ORIENTED_EDGE('',*,*,#20904,.T.); +#20904 = EDGE_CURVE('',#20897,#20905,#20907,.T.); +#20905 = VERTEX_POINT('',#20906); +#20906 = CARTESIAN_POINT('',(2.151888146546,-1.05,0.)); +#20907 = CIRCLE('',#20908,0.15); +#20908 = AXIS2_PLACEMENT_3D('',#20909,#20910,#20911); +#20909 = CARTESIAN_POINT('',(2.151888146546,-1.05,0.15)); +#20910 = DIRECTION('',(-0.,1.,0.)); +#20911 = DIRECTION('',(0.,0.,1.)); +#20912 = ORIENTED_EDGE('',*,*,#20913,.F.); +#20913 = EDGE_CURVE('',#20914,#20905,#20916,.T.); +#20914 = VERTEX_POINT('',#20915); +#20915 = CARTESIAN_POINT('',(1.651888146546,-1.05,0.)); +#20916 = LINE('',#20917,#20918); +#20917 = CARTESIAN_POINT('',(2.301888146546,-1.05,0.)); +#20918 = VECTOR('',#20919,1.); +#20919 = DIRECTION('',(1.,-0.,-0.)); +#20920 = ORIENTED_EDGE('',*,*,#20921,.T.); +#20921 = EDGE_CURVE('',#20914,#20922,#20924,.T.); +#20922 = VERTEX_POINT('',#20923); +#20923 = CARTESIAN_POINT('',(1.501888146546,-1.05,0.15)); +#20924 = CIRCLE('',#20925,0.15); +#20925 = AXIS2_PLACEMENT_3D('',#20926,#20927,#20928); +#20926 = CARTESIAN_POINT('',(1.651888146546,-1.05,0.15)); +#20927 = DIRECTION('',(-0.,1.,0.)); +#20928 = DIRECTION('',(0.,0.,1.)); +#20929 = ORIENTED_EDGE('',*,*,#20930,.F.); +#20930 = EDGE_CURVE('',#20931,#20922,#20933,.T.); +#20931 = VERTEX_POINT('',#20932); +#20932 = CARTESIAN_POINT('',(1.501888146546,-1.05,0.421567430253)); +#20933 = LINE('',#20934,#20935); +#20934 = CARTESIAN_POINT('',(1.501888146546,-1.05,0.)); +#20935 = VECTOR('',#20936,1.); +#20936 = DIRECTION('',(-0.,-0.,-1.)); +#20937 = ORIENTED_EDGE('',*,*,#20938,.T.); +#20938 = EDGE_CURVE('',#20931,#20939,#20941,.T.); +#20939 = VERTEX_POINT('',#20940); +#20940 = CARTESIAN_POINT('',(1.53431899851,-1.05,0.514720505512)); +#20941 = CIRCLE('',#20942,0.15); +#20942 = AXIS2_PLACEMENT_3D('',#20943,#20944,#20945); +#20943 = CARTESIAN_POINT('',(1.651888146546,-1.05,0.421567430253)); +#20944 = DIRECTION('',(-0.,1.,0.)); +#20945 = DIRECTION('',(0.,0.,1.)); +#20946 = ORIENTED_EDGE('',*,*,#20947,.F.); +#20947 = EDGE_CURVE('',#20948,#20939,#20950,.T.); +#20948 = VERTEX_POINT('',#20949); +#20949 = CARTESIAN_POINT('',(1.569457294581,-1.05,0.559068794831)); +#20950 = LINE('',#20951,#20952); +#20951 = CARTESIAN_POINT('',(1.501888146546,-1.05,0.473789300343)); +#20952 = VECTOR('',#20953,1.); +#20953 = DIRECTION('',(-0.621020501725,-0.,-0.783794320238)); +#20954 = ORIENTED_EDGE('',*,*,#20955,.T.); +#20955 = EDGE_CURVE('',#20948,#20956,#20958,.T.); +#20956 = VERTEX_POINT('',#20957); +#20957 = CARTESIAN_POINT('',(1.601888146546,-1.05,0.65222187009)); +#20958 = CIRCLE('',#20959,0.15); +#20959 = AXIS2_PLACEMENT_3D('',#20960,#20961,#20962); +#20960 = CARTESIAN_POINT('',(1.451888146546,-1.05,0.65222187009)); +#20961 = DIRECTION('',(0.,-1.,0.)); +#20962 = DIRECTION('',(0.,0.,1.)); +#20963 = ORIENTED_EDGE('',*,*,#20964,.F.); +#20964 = EDGE_CURVE('',#20965,#20956,#20967,.T.); +#20965 = VERTEX_POINT('',#20966); +#20966 = CARTESIAN_POINT('',(1.601888146546,-1.05,0.7)); +#20967 = LINE('',#20968,#20969); +#20968 = CARTESIAN_POINT('',(1.601888146546,-1.05,0.6)); +#20969 = VECTOR('',#20970,1.); +#20970 = DIRECTION('',(1.734723475977E-15,-0.,-1.)); +#20971 = ORIENTED_EDGE('',*,*,#20972,.T.); +#20972 = EDGE_CURVE('',#20965,#20973,#20975,.T.); +#20973 = VERTEX_POINT('',#20974); +#20974 = CARTESIAN_POINT('',(1.451888146546,-1.05,0.85)); +#20975 = CIRCLE('',#20976,0.15); +#20976 = AXIS2_PLACEMENT_3D('',#20977,#20978,#20979); +#20977 = CARTESIAN_POINT('',(1.451888146546,-1.05,0.7)); +#20978 = DIRECTION('',(0.,-1.,0.)); +#20979 = DIRECTION('',(1.445602896647E-15,0.,1.)); +#20980 = ORIENTED_EDGE('',*,*,#20981,.F.); +#20981 = EDGE_CURVE('',#20982,#20973,#20984,.T.); +#20982 = VERTEX_POINT('',#20983); +#20983 = CARTESIAN_POINT('',(1.371633435948,-1.05,0.85)); +#20984 = LINE('',#20985,#20986); +#20985 = CARTESIAN_POINT('',(1.601888146546,-1.05,0.85)); +#20986 = VECTOR('',#20987,1.); +#20987 = DIRECTION('',(1.,-0.,-0.)); +#20988 = ORIENTED_EDGE('',*,*,#20989,.T.); +#20989 = EDGE_CURVE('',#20982,#20990,#20992,.T.); +#20990 = VERTEX_POINT('',#20991); +#20991 = CARTESIAN_POINT('',(1.256939256486,-1.05,0.796670808404)); +#20992 = CIRCLE('',#20993,0.15); +#20993 = AXIS2_PLACEMENT_3D('',#20994,#20995,#20996); +#20994 = CARTESIAN_POINT('',(1.371633435948,-1.05,0.7)); +#20995 = DIRECTION('',(0.,-1.,0.)); +#20996 = DIRECTION('',(0.,0.,1.)); +#20997 = ORIENTED_EDGE('',*,*,#20998,.F.); +#20998 = EDGE_CURVE('',#20999,#20990,#21001,.T.); +#20999 = VERTEX_POINT('',#21000); +#21000 = CARTESIAN_POINT('',(0.711888146546,-1.05,0.15)); +#21001 = LINE('',#21002,#21003); +#21002 = CARTESIAN_POINT('',(1.301888146546,-1.05,0.85)); +#21003 = VECTOR('',#21004,1.); +#21004 = DIRECTION('',(0.644472056026,-0.,0.764627863082)); +#21005 = ORIENTED_EDGE('',*,*,#21006,.F.); +#21006 = EDGE_CURVE('',#21007,#20999,#21009,.T.); +#21007 = VERTEX_POINT('',#21008); +#21008 = CARTESIAN_POINT('',(-0.711888146546,-1.05,0.15)); +#21009 = LINE('',#21010,#21011); +#21010 = CARTESIAN_POINT('',(-0.711888146546,-1.05,0.15)); +#21011 = VECTOR('',#21012,1.); +#21012 = DIRECTION('',(1.,0.,0.)); +#21013 = ORIENTED_EDGE('',*,*,#21014,.F.); +#21014 = EDGE_CURVE('',#21015,#21007,#21017,.T.); +#21015 = VERTEX_POINT('',#21016); +#21016 = CARTESIAN_POINT('',(-1.256939256486,-1.05,0.796670808404)); +#21017 = LINE('',#21018,#21019); +#21018 = CARTESIAN_POINT('',(-1.301888146546,-1.05,0.85)); +#21019 = VECTOR('',#21020,1.); +#21020 = DIRECTION('',(0.644472056026,0.,-0.764627863082)); +#21021 = ORIENTED_EDGE('',*,*,#21022,.T.); +#21022 = EDGE_CURVE('',#21015,#21023,#21025,.T.); +#21023 = VERTEX_POINT('',#21024); +#21024 = CARTESIAN_POINT('',(-1.371633435948,-1.05,0.85)); +#21025 = CIRCLE('',#21026,0.15); +#21026 = AXIS2_PLACEMENT_3D('',#21027,#21028,#21029); +#21027 = CARTESIAN_POINT('',(-1.371633435948,-1.05,0.7)); +#21028 = DIRECTION('',(0.,-1.,-0.)); +#21029 = DIRECTION('',(-1.445602896647E-15,-0.,1.)); +#21030 = ORIENTED_EDGE('',*,*,#21031,.F.); +#21031 = EDGE_CURVE('',#21032,#21023,#21034,.T.); +#21032 = VERTEX_POINT('',#21033); +#21033 = CARTESIAN_POINT('',(-1.451888146546,-1.05,0.85)); +#21034 = LINE('',#21035,#21036); +#21035 = CARTESIAN_POINT('',(-1.601888146546,-1.05,0.85)); +#21036 = VECTOR('',#21037,1.); +#21037 = DIRECTION('',(1.,0.,0.)); +#21038 = ORIENTED_EDGE('',*,*,#21039,.T.); +#21039 = EDGE_CURVE('',#21032,#21040,#21042,.T.); +#21040 = VERTEX_POINT('',#21041); +#21041 = CARTESIAN_POINT('',(-1.601888146546,-1.05,0.7)); +#21042 = CIRCLE('',#21043,0.15); +#21043 = AXIS2_PLACEMENT_3D('',#21044,#21045,#21046); +#21044 = CARTESIAN_POINT('',(-1.451888146546,-1.05,0.7)); +#21045 = DIRECTION('',(0.,-1.,0.)); +#21046 = DIRECTION('',(0.,0.,1.)); +#21047 = ORIENTED_EDGE('',*,*,#21048,.F.); +#21048 = EDGE_CURVE('',#21049,#21040,#21051,.T.); +#21049 = VERTEX_POINT('',#21050); +#21050 = CARTESIAN_POINT('',(-1.601888146546,-1.05,0.654782546749)); +#21051 = LINE('',#21052,#21053); +#21052 = CARTESIAN_POINT('',(-1.601888146546,-1.05,0.6)); +#21053 = VECTOR('',#21054,1.); +#21054 = DIRECTION('',(0.,0.,1.)); +#21055 = ORIENTED_EDGE('',*,*,#21056,.T.); +#21056 = EDGE_CURVE('',#21049,#21057,#21059,.T.); +#21057 = VERTEX_POINT('',#21058); +#21058 = CARTESIAN_POINT('',(-1.566582326008,-1.05,0.558111738345)); +#21059 = CIRCLE('',#21060,0.15); +#21060 = AXIS2_PLACEMENT_3D('',#21061,#21062,#21063); +#21061 = CARTESIAN_POINT('',(-1.451888146546,-1.05,0.654782546749)); +#21062 = DIRECTION('',(0.,-1.,0.)); +#21063 = DIRECTION('',(0.,0.,1.)); +#21064 = ORIENTED_EDGE('',*,*,#21065,.F.); +#21065 = EDGE_CURVE('',#21066,#21057,#21068,.T.); +#21066 = VERTEX_POINT('',#21067); +#21067 = CARTESIAN_POINT('',(-1.533417673992,-1.05,0.518763846123)); +#21068 = LINE('',#21069,#21070); +#21069 = CARTESIAN_POINT('',(-1.498111853454,-1.05,0.476875584468)); +#21070 = VECTOR('',#21071,1.); +#21071 = DIRECTION('',(-0.644472056026,0.,0.764627863082)); +#21072 = ORIENTED_EDGE('',*,*,#21073,.T.); +#21073 = EDGE_CURVE('',#21066,#21074,#21076,.T.); +#21074 = VERTEX_POINT('',#21075); +#21075 = CARTESIAN_POINT('',(-1.498111853454,-1.05,0.422093037719)); +#21076 = CIRCLE('',#21077,0.15); +#21077 = AXIS2_PLACEMENT_3D('',#21078,#21079,#21080); +#21078 = CARTESIAN_POINT('',(-1.648111853454,-1.05,0.422093037719)); +#21079 = DIRECTION('',(-0.,1.,0.)); +#21080 = DIRECTION('',(0.,0.,1.)); +#21081 = ORIENTED_EDGE('',*,*,#21082,.F.); +#21082 = EDGE_CURVE('',#21083,#21074,#21085,.T.); +#21083 = VERTEX_POINT('',#21084); +#21084 = CARTESIAN_POINT('',(-1.498111853454,-1.05,0.15)); +#21085 = LINE('',#21086,#21087); +#21086 = CARTESIAN_POINT('',(-1.498111853454,-1.05,0.)); +#21087 = VECTOR('',#21088,1.); +#21088 = DIRECTION('',(0.,0.,1.)); +#21089 = ORIENTED_EDGE('',*,*,#21090,.T.); +#21090 = EDGE_CURVE('',#21083,#21091,#21093,.T.); +#21091 = VERTEX_POINT('',#21092); +#21092 = CARTESIAN_POINT('',(-1.648111853454,-1.05,0.)); +#21093 = CIRCLE('',#21094,0.15); +#21094 = AXIS2_PLACEMENT_3D('',#21095,#21096,#21097); +#21095 = CARTESIAN_POINT('',(-1.648111853454,-1.05,0.15)); +#21096 = DIRECTION('',(-0.,1.,0.)); +#21097 = DIRECTION('',(0.,0.,1.)); +#21098 = ORIENTED_EDGE('',*,*,#21099,.F.); +#21099 = EDGE_CURVE('',#21100,#21091,#21102,.T.); +#21100 = VERTEX_POINT('',#21101); +#21101 = CARTESIAN_POINT('',(-2.148111853454,-1.05,0.)); +#21102 = LINE('',#21103,#21104); +#21103 = CARTESIAN_POINT('',(-2.298111853454,-1.05,0.)); +#21104 = VECTOR('',#21105,1.); +#21105 = DIRECTION('',(1.,0.,0.)); +#21106 = ORIENTED_EDGE('',*,*,#21107,.T.); +#21107 = EDGE_CURVE('',#21100,#21108,#21110,.T.); +#21108 = VERTEX_POINT('',#21109); +#21109 = CARTESIAN_POINT('',(-2.298111853454,-1.05,0.15)); +#21110 = CIRCLE('',#21111,0.15); +#21111 = AXIS2_PLACEMENT_3D('',#21112,#21113,#21114); +#21112 = CARTESIAN_POINT('',(-2.148111853454,-1.05,0.15)); +#21113 = DIRECTION('',(-0.,1.,0.)); +#21114 = DIRECTION('',(0.,0.,1.)); +#21115 = ORIENTED_EDGE('',*,*,#21116,.F.); +#21116 = EDGE_CURVE('',#21117,#21108,#21119,.T.); +#21117 = VERTEX_POINT('',#21118); +#21118 = CARTESIAN_POINT('',(-2.298111853454,-1.05,0.42975611219)); +#21119 = LINE('',#21120,#21121); +#21120 = CARTESIAN_POINT('',(-2.298111853454,-1.05,0.491888146546)); +#21121 = VECTOR('',#21122,1.); +#21122 = DIRECTION('',(0.,0.,-1.)); +#21123 = ORIENTED_EDGE('',*,*,#21124,.T.); +#21124 = EDGE_CURVE('',#21117,#21125,#21127,.T.); +#21125 = VERTEX_POINT('',#21126); +#21126 = CARTESIAN_POINT('',(-2.254177870632,-1.05,0.535822129368)); +#21127 = CIRCLE('',#21128,0.15); +#21128 = AXIS2_PLACEMENT_3D('',#21129,#21130,#21131); +#21129 = CARTESIAN_POINT('',(-2.148111853454,-1.05,0.42975611219)); +#21130 = DIRECTION('',(-0.,1.,0.)); +#21131 = DIRECTION('',(0.,0.,1.)); +#21132 = ORIENTED_EDGE('',*,*,#21133,.F.); +#21133 = EDGE_CURVE('',#21134,#21125,#21136,.T.); +#21134 = VERTEX_POINT('',#21135); +#21135 = CARTESIAN_POINT('',(-2.133933982822,-1.05,0.656066017178)); +#21136 = LINE('',#21137,#21138); +#21137 = CARTESIAN_POINT('',(-2.09,-1.05,0.7)); +#21138 = VECTOR('',#21139,1.); +#21139 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#21140 = ORIENTED_EDGE('',*,*,#21141,.T.); +#21141 = EDGE_CURVE('',#21134,#21142,#21144,.T.); +#21142 = VERTEX_POINT('',#21143); +#21143 = CARTESIAN_POINT('',(-2.09,-1.05,0.762132034356)); +#21144 = CIRCLE('',#21145,0.15); +#21145 = AXIS2_PLACEMENT_3D('',#21146,#21147,#21148); +#21146 = CARTESIAN_POINT('',(-2.24,-1.05,0.762132034356)); +#21147 = DIRECTION('',(0.,-1.,-0.)); +#21148 = DIRECTION('',(-2.891205793295E-15,-0.,1.)); +#21149 = ORIENTED_EDGE('',*,*,#21150,.F.); +#21150 = EDGE_CURVE('',#21151,#21142,#21153,.T.); +#21151 = VERTEX_POINT('',#21152); +#21152 = CARTESIAN_POINT('',(-2.09,-1.05,0.8)); +#21153 = LINE('',#21154,#21155); +#21154 = CARTESIAN_POINT('',(-2.09,-1.05,0.95)); +#21155 = VECTOR('',#21156,1.); +#21156 = DIRECTION('',(0.,0.,-1.)); +#21157 = ORIENTED_EDGE('',*,*,#21158,.T.); +#21158 = EDGE_CURVE('',#21151,#21159,#21161,.T.); +#21159 = VERTEX_POINT('',#21160); +#21160 = CARTESIAN_POINT('',(-2.09,-1.05,2.7)); +#21161 = LINE('',#21162,#21163); +#21162 = CARTESIAN_POINT('',(-2.09,-1.05,0.95)); +#21163 = VECTOR('',#21164,1.); +#21164 = DIRECTION('',(0.,0.,1.)); +#21165 = ORIENTED_EDGE('',*,*,#21166,.F.); +#21166 = EDGE_CURVE('',#21167,#21159,#21169,.T.); +#21167 = VERTEX_POINT('',#21168); +#21168 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#21169 = LINE('',#21170,#21171); +#21170 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#21171 = VECTOR('',#21172,1.); +#21172 = DIRECTION('',(0.,0.,-1.)); +#21173 = ORIENTED_EDGE('',*,*,#21174,.F.); +#21174 = EDGE_CURVE('',#21175,#21167,#21177,.T.); +#21175 = VERTEX_POINT('',#21176); +#21176 = CARTESIAN_POINT('',(2.09,-1.05,3.35)); +#21177 = LINE('',#21178,#21179); +#21178 = CARTESIAN_POINT('',(-2.09,-1.05,3.35)); +#21179 = VECTOR('',#21180,1.); +#21180 = DIRECTION('',(-1.,-0.,-0.)); +#21181 = ORIENTED_EDGE('',*,*,#21182,.F.); +#21182 = EDGE_CURVE('',#20855,#21175,#21183,.T.); +#21183 = LINE('',#21184,#21185); +#21184 = CARTESIAN_POINT('',(2.09,-1.05,3.35)); +#21185 = VECTOR('',#21186,1.); +#21186 = DIRECTION('',(-0.,-0.,1.)); +#21187 = PLANE('',#21188); +#21188 = AXIS2_PLACEMENT_3D('',#21189,#21190,#21191); +#21189 = CARTESIAN_POINT('',(0.,-1.05,0.)); +#21190 = DIRECTION('',(-0.,1.,0.)); +#21191 = DIRECTION('',(0.,0.,1.)); +#21192 = ADVANCED_FACE('',(#21193,#21531),#21541,.F.); +#21193 = FACE_BOUND('',#21194,.T.); +#21194 = EDGE_LOOP('',(#21195,#21205,#21213,#21221,#21230,#21238,#21247, + #21255,#21264,#21272,#21281,#21289,#21298,#21306,#21315,#21323, + #21332,#21340,#21349,#21357,#21365,#21373,#21382,#21390,#21399, + #21407,#21416,#21424,#21433,#21441,#21450,#21458,#21467,#21475, + #21484,#21492,#21501,#21509,#21517,#21525)); +#21195 = ORIENTED_EDGE('',*,*,#21196,.T.); +#21196 = EDGE_CURVE('',#21197,#21199,#21201,.T.); +#21197 = VERTEX_POINT('',#21198); +#21198 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21199 = VERTEX_POINT('',#21200); +#21200 = CARTESIAN_POINT('',(-2.09,-1.2,2.7)); +#21201 = LINE('',#21202,#21203); +#21202 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21203 = VECTOR('',#21204,1.); +#21204 = DIRECTION('',(0.,0.,-1.)); +#21205 = ORIENTED_EDGE('',*,*,#21206,.T.); +#21206 = EDGE_CURVE('',#21199,#21207,#21209,.T.); +#21207 = VERTEX_POINT('',#21208); +#21208 = CARTESIAN_POINT('',(-2.09,-1.2,0.8)); +#21209 = LINE('',#21210,#21211); +#21210 = CARTESIAN_POINT('',(-2.09,-1.2,0.)); +#21211 = VECTOR('',#21212,1.); +#21212 = DIRECTION('',(0.,0.,-1.)); +#21213 = ORIENTED_EDGE('',*,*,#21214,.T.); +#21214 = EDGE_CURVE('',#21207,#21215,#21217,.T.); +#21215 = VERTEX_POINT('',#21216); +#21216 = CARTESIAN_POINT('',(-2.09,-1.2,0.762132034356)); +#21217 = LINE('',#21218,#21219); +#21218 = CARTESIAN_POINT('',(-2.09,-1.2,0.95)); +#21219 = VECTOR('',#21220,1.); +#21220 = DIRECTION('',(0.,0.,-1.)); +#21221 = ORIENTED_EDGE('',*,*,#21222,.T.); +#21222 = EDGE_CURVE('',#21215,#21223,#21225,.T.); +#21223 = VERTEX_POINT('',#21224); +#21224 = CARTESIAN_POINT('',(-2.133933982822,-1.2,0.656066017178)); +#21225 = CIRCLE('',#21226,0.15); +#21226 = AXIS2_PLACEMENT_3D('',#21227,#21228,#21229); +#21227 = CARTESIAN_POINT('',(-2.24,-1.2,0.762132034356)); +#21228 = DIRECTION('',(-0.,1.,0.)); +#21229 = DIRECTION('',(0.,0.,1.)); +#21230 = ORIENTED_EDGE('',*,*,#21231,.T.); +#21231 = EDGE_CURVE('',#21223,#21232,#21234,.T.); +#21232 = VERTEX_POINT('',#21233); +#21233 = CARTESIAN_POINT('',(-2.254177870632,-1.2,0.535822129368)); +#21234 = LINE('',#21235,#21236); +#21235 = CARTESIAN_POINT('',(-2.09,-1.2,0.7)); +#21236 = VECTOR('',#21237,1.); +#21237 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#21238 = ORIENTED_EDGE('',*,*,#21239,.T.); +#21239 = EDGE_CURVE('',#21232,#21240,#21242,.T.); +#21240 = VERTEX_POINT('',#21241); +#21241 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.42975611219)); +#21242 = CIRCLE('',#21243,0.15); +#21243 = AXIS2_PLACEMENT_3D('',#21244,#21245,#21246); +#21244 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.42975611219)); +#21245 = DIRECTION('',(0.,-1.,-0.)); +#21246 = DIRECTION('',(-2.891205793295E-15,-0.,1.)); +#21247 = ORIENTED_EDGE('',*,*,#21248,.T.); +#21248 = EDGE_CURVE('',#21240,#21249,#21251,.T.); +#21249 = VERTEX_POINT('',#21250); +#21250 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.15)); +#21251 = LINE('',#21252,#21253); +#21252 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.491888146546)); +#21253 = VECTOR('',#21254,1.); +#21254 = DIRECTION('',(0.,0.,-1.)); +#21255 = ORIENTED_EDGE('',*,*,#21256,.T.); +#21256 = EDGE_CURVE('',#21249,#21257,#21259,.T.); +#21257 = VERTEX_POINT('',#21258); +#21258 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.)); +#21259 = CIRCLE('',#21260,0.15); +#21260 = AXIS2_PLACEMENT_3D('',#21261,#21262,#21263); +#21261 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.15)); +#21262 = DIRECTION('',(0.,-1.,0.)); +#21263 = DIRECTION('',(0.,0.,1.)); +#21264 = ORIENTED_EDGE('',*,*,#21265,.T.); +#21265 = EDGE_CURVE('',#21257,#21266,#21268,.T.); +#21266 = VERTEX_POINT('',#21267); +#21267 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.)); +#21268 = LINE('',#21269,#21270); +#21269 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.)); +#21270 = VECTOR('',#21271,1.); +#21271 = DIRECTION('',(1.,0.,0.)); +#21272 = ORIENTED_EDGE('',*,*,#21273,.T.); +#21273 = EDGE_CURVE('',#21266,#21274,#21276,.T.); +#21274 = VERTEX_POINT('',#21275); +#21275 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.15)); +#21276 = CIRCLE('',#21277,0.15); +#21277 = AXIS2_PLACEMENT_3D('',#21278,#21279,#21280); +#21278 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.15)); +#21279 = DIRECTION('',(0.,-1.,0.)); +#21280 = DIRECTION('',(0.,0.,1.)); +#21281 = ORIENTED_EDGE('',*,*,#21282,.T.); +#21282 = EDGE_CURVE('',#21274,#21283,#21285,.T.); +#21283 = VERTEX_POINT('',#21284); +#21284 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.422093037719)); +#21285 = LINE('',#21286,#21287); +#21286 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.)); +#21287 = VECTOR('',#21288,1.); +#21288 = DIRECTION('',(0.,0.,1.)); +#21289 = ORIENTED_EDGE('',*,*,#21290,.T.); +#21290 = EDGE_CURVE('',#21283,#21291,#21293,.T.); +#21291 = VERTEX_POINT('',#21292); +#21292 = CARTESIAN_POINT('',(-1.533417673992,-1.2,0.518763846123)); +#21293 = CIRCLE('',#21294,0.15); +#21294 = AXIS2_PLACEMENT_3D('',#21295,#21296,#21297); +#21295 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.422093037719)); +#21296 = DIRECTION('',(0.,-1.,-0.)); +#21297 = DIRECTION('',(-1.445602896647E-15,-0.,1.)); +#21298 = ORIENTED_EDGE('',*,*,#21299,.T.); +#21299 = EDGE_CURVE('',#21291,#21300,#21302,.T.); +#21300 = VERTEX_POINT('',#21301); +#21301 = CARTESIAN_POINT('',(-1.566582326008,-1.2,0.558111738345)); +#21302 = LINE('',#21303,#21304); +#21303 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.476875584468)); +#21304 = VECTOR('',#21305,1.); +#21305 = DIRECTION('',(-0.644472056026,0.,0.764627863082)); +#21306 = ORIENTED_EDGE('',*,*,#21307,.T.); +#21307 = EDGE_CURVE('',#21300,#21308,#21310,.T.); +#21308 = VERTEX_POINT('',#21309); +#21309 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.654782546749)); +#21310 = CIRCLE('',#21311,0.15); +#21311 = AXIS2_PLACEMENT_3D('',#21312,#21313,#21314); +#21312 = CARTESIAN_POINT('',(-1.451888146546,-1.2,0.654782546749)); +#21313 = DIRECTION('',(-0.,1.,0.)); +#21314 = DIRECTION('',(0.,0.,1.)); +#21315 = ORIENTED_EDGE('',*,*,#21316,.T.); +#21316 = EDGE_CURVE('',#21308,#21317,#21319,.T.); +#21317 = VERTEX_POINT('',#21318); +#21318 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.7)); +#21319 = LINE('',#21320,#21321); +#21320 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.6)); +#21321 = VECTOR('',#21322,1.); +#21322 = DIRECTION('',(0.,0.,1.)); +#21323 = ORIENTED_EDGE('',*,*,#21324,.T.); +#21324 = EDGE_CURVE('',#21317,#21325,#21327,.T.); +#21325 = VERTEX_POINT('',#21326); +#21326 = CARTESIAN_POINT('',(-1.451888146546,-1.2,0.85)); +#21327 = CIRCLE('',#21328,0.15); +#21328 = AXIS2_PLACEMENT_3D('',#21329,#21330,#21331); +#21329 = CARTESIAN_POINT('',(-1.451888146546,-1.2,0.7)); +#21330 = DIRECTION('',(-0.,1.,0.)); +#21331 = DIRECTION('',(0.,0.,1.)); +#21332 = ORIENTED_EDGE('',*,*,#21333,.T.); +#21333 = EDGE_CURVE('',#21325,#21334,#21336,.T.); +#21334 = VERTEX_POINT('',#21335); +#21335 = CARTESIAN_POINT('',(-1.371633435948,-1.2,0.85)); +#21336 = LINE('',#21337,#21338); +#21337 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.85)); +#21338 = VECTOR('',#21339,1.); +#21339 = DIRECTION('',(1.,0.,0.)); +#21340 = ORIENTED_EDGE('',*,*,#21341,.T.); +#21341 = EDGE_CURVE('',#21334,#21342,#21344,.T.); +#21342 = VERTEX_POINT('',#21343); +#21343 = CARTESIAN_POINT('',(-1.256939256486,-1.2,0.796670808404)); +#21344 = CIRCLE('',#21345,0.15); +#21345 = AXIS2_PLACEMENT_3D('',#21346,#21347,#21348); +#21346 = CARTESIAN_POINT('',(-1.371633435948,-1.2,0.7)); +#21347 = DIRECTION('',(-0.,1.,0.)); +#21348 = DIRECTION('',(0.,0.,1.)); +#21349 = ORIENTED_EDGE('',*,*,#21350,.T.); +#21350 = EDGE_CURVE('',#21342,#21351,#21353,.T.); +#21351 = VERTEX_POINT('',#21352); +#21352 = CARTESIAN_POINT('',(-0.711888146546,-1.2,0.15)); +#21353 = LINE('',#21354,#21355); +#21354 = CARTESIAN_POINT('',(-1.301888146546,-1.2,0.85)); +#21355 = VECTOR('',#21356,1.); +#21356 = DIRECTION('',(0.644472056026,0.,-0.764627863082)); +#21357 = ORIENTED_EDGE('',*,*,#21358,.T.); +#21358 = EDGE_CURVE('',#21351,#21359,#21361,.T.); +#21359 = VERTEX_POINT('',#21360); +#21360 = CARTESIAN_POINT('',(0.711888146546,-1.2,0.15)); +#21361 = LINE('',#21362,#21363); +#21362 = CARTESIAN_POINT('',(-0.711888146546,-1.2,0.15)); +#21363 = VECTOR('',#21364,1.); +#21364 = DIRECTION('',(1.,0.,0.)); +#21365 = ORIENTED_EDGE('',*,*,#21366,.T.); +#21366 = EDGE_CURVE('',#21359,#21367,#21369,.T.); +#21367 = VERTEX_POINT('',#21368); +#21368 = CARTESIAN_POINT('',(1.256939256486,-1.2,0.796670808404)); +#21369 = LINE('',#21370,#21371); +#21370 = CARTESIAN_POINT('',(1.301888146546,-1.2,0.85)); +#21371 = VECTOR('',#21372,1.); +#21372 = DIRECTION('',(0.644472056026,-0.,0.764627863082)); +#21373 = ORIENTED_EDGE('',*,*,#21374,.T.); +#21374 = EDGE_CURVE('',#21367,#21375,#21377,.T.); +#21375 = VERTEX_POINT('',#21376); +#21376 = CARTESIAN_POINT('',(1.371633435948,-1.2,0.85)); +#21377 = CIRCLE('',#21378,0.15); +#21378 = AXIS2_PLACEMENT_3D('',#21379,#21380,#21381); +#21379 = CARTESIAN_POINT('',(1.371633435948,-1.2,0.7)); +#21380 = DIRECTION('',(-0.,1.,0.)); +#21381 = DIRECTION('',(0.,0.,1.)); +#21382 = ORIENTED_EDGE('',*,*,#21383,.T.); +#21383 = EDGE_CURVE('',#21375,#21384,#21386,.T.); +#21384 = VERTEX_POINT('',#21385); +#21385 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.85)); +#21386 = LINE('',#21387,#21388); +#21387 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.85)); +#21388 = VECTOR('',#21389,1.); +#21389 = DIRECTION('',(1.,-0.,-0.)); +#21390 = ORIENTED_EDGE('',*,*,#21391,.T.); +#21391 = EDGE_CURVE('',#21384,#21392,#21394,.T.); +#21392 = VERTEX_POINT('',#21393); +#21393 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.7)); +#21394 = CIRCLE('',#21395,0.15); +#21395 = AXIS2_PLACEMENT_3D('',#21396,#21397,#21398); +#21396 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.7)); +#21397 = DIRECTION('',(-0.,1.,0.)); +#21398 = DIRECTION('',(0.,0.,1.)); +#21399 = ORIENTED_EDGE('',*,*,#21400,.T.); +#21400 = EDGE_CURVE('',#21392,#21401,#21403,.T.); +#21401 = VERTEX_POINT('',#21402); +#21402 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.65222187009)); +#21403 = LINE('',#21404,#21405); +#21404 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.6)); +#21405 = VECTOR('',#21406,1.); +#21406 = DIRECTION('',(1.734723475977E-15,-0.,-1.)); +#21407 = ORIENTED_EDGE('',*,*,#21408,.T.); +#21408 = EDGE_CURVE('',#21401,#21409,#21411,.T.); +#21409 = VERTEX_POINT('',#21410); +#21410 = CARTESIAN_POINT('',(1.569457294581,-1.2,0.559068794831)); +#21411 = CIRCLE('',#21412,0.15); +#21412 = AXIS2_PLACEMENT_3D('',#21413,#21414,#21415); +#21413 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.65222187009)); +#21414 = DIRECTION('',(-0.,1.,0.)); +#21415 = DIRECTION('',(0.,0.,1.)); +#21416 = ORIENTED_EDGE('',*,*,#21417,.T.); +#21417 = EDGE_CURVE('',#21409,#21418,#21420,.T.); +#21418 = VERTEX_POINT('',#21419); +#21419 = CARTESIAN_POINT('',(1.53431899851,-1.2,0.514720505512)); +#21420 = LINE('',#21421,#21422); +#21421 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.473789300343)); +#21422 = VECTOR('',#21423,1.); +#21423 = DIRECTION('',(-0.621020501725,-0.,-0.783794320238)); +#21424 = ORIENTED_EDGE('',*,*,#21425,.T.); +#21425 = EDGE_CURVE('',#21418,#21426,#21428,.T.); +#21426 = VERTEX_POINT('',#21427); +#21427 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.421567430253)); +#21428 = CIRCLE('',#21429,0.15); +#21429 = AXIS2_PLACEMENT_3D('',#21430,#21431,#21432); +#21430 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.421567430253)); +#21431 = DIRECTION('',(0.,-1.,0.)); +#21432 = DIRECTION('',(1.445602896647E-15,0.,1.)); +#21433 = ORIENTED_EDGE('',*,*,#21434,.T.); +#21434 = EDGE_CURVE('',#21426,#21435,#21437,.T.); +#21435 = VERTEX_POINT('',#21436); +#21436 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.15)); +#21437 = LINE('',#21438,#21439); +#21438 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.)); +#21439 = VECTOR('',#21440,1.); +#21440 = DIRECTION('',(-0.,-0.,-1.)); +#21441 = ORIENTED_EDGE('',*,*,#21442,.T.); +#21442 = EDGE_CURVE('',#21435,#21443,#21445,.T.); +#21443 = VERTEX_POINT('',#21444); +#21444 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.)); +#21445 = CIRCLE('',#21446,0.15); +#21446 = AXIS2_PLACEMENT_3D('',#21447,#21448,#21449); +#21447 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.15)); +#21448 = DIRECTION('',(0.,-1.,0.)); +#21449 = DIRECTION('',(0.,0.,1.)); +#21450 = ORIENTED_EDGE('',*,*,#21451,.T.); +#21451 = EDGE_CURVE('',#21443,#21452,#21454,.T.); +#21452 = VERTEX_POINT('',#21453); +#21453 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.)); +#21454 = LINE('',#21455,#21456); +#21455 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.)); +#21456 = VECTOR('',#21457,1.); +#21457 = DIRECTION('',(1.,-0.,-0.)); +#21458 = ORIENTED_EDGE('',*,*,#21459,.T.); +#21459 = EDGE_CURVE('',#21452,#21460,#21462,.T.); +#21460 = VERTEX_POINT('',#21461); +#21461 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.15)); +#21462 = CIRCLE('',#21463,0.15); +#21463 = AXIS2_PLACEMENT_3D('',#21464,#21465,#21466); +#21464 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.15)); +#21465 = DIRECTION('',(0.,-1.,0.)); +#21466 = DIRECTION('',(0.,0.,1.)); +#21467 = ORIENTED_EDGE('',*,*,#21468,.T.); +#21468 = EDGE_CURVE('',#21460,#21469,#21471,.T.); +#21469 = VERTEX_POINT('',#21470); +#21470 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.419360286527)); +#21471 = LINE('',#21472,#21473); +#21472 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.491888146546)); +#21473 = VECTOR('',#21474,1.); +#21474 = DIRECTION('',(-0.,-0.,1.)); +#21475 = ORIENTED_EDGE('',*,*,#21476,.T.); +#21476 = EDGE_CURVE('',#21469,#21477,#21479,.T.); +#21477 = VERTEX_POINT('',#21478); +#21478 = CARTESIAN_POINT('',(2.245041221804,-1.2,0.536929434563)); +#21479 = CIRCLE('',#21480,0.15); +#21480 = AXIS2_PLACEMENT_3D('',#21481,#21482,#21483); +#21481 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.419360286527)); +#21482 = DIRECTION('',(0.,-1.,0.)); +#21483 = DIRECTION('',(0.,0.,1.)); +#21484 = ORIENTED_EDGE('',*,*,#21485,.T.); +#21485 = EDGE_CURVE('',#21477,#21486,#21488,.T.); +#21486 = VERTEX_POINT('',#21487); +#21487 = CARTESIAN_POINT('',(2.146846924741,-1.2,0.614731314538)); +#21488 = LINE('',#21489,#21490); +#21489 = CARTESIAN_POINT('',(2.09,-1.2,0.659772602556)); +#21490 = VECTOR('',#21491,1.); +#21491 = DIRECTION('',(-0.783794320238,-0.,0.621020501725)); +#21492 = ORIENTED_EDGE('',*,*,#21493,.T.); +#21493 = EDGE_CURVE('',#21486,#21494,#21496,.T.); +#21494 = VERTEX_POINT('',#21495); +#21495 = CARTESIAN_POINT('',(2.09,-1.2,0.732300462574)); +#21496 = CIRCLE('',#21497,0.15); +#21497 = AXIS2_PLACEMENT_3D('',#21498,#21499,#21500); +#21498 = CARTESIAN_POINT('',(2.24,-1.2,0.732300462574)); +#21499 = DIRECTION('',(-0.,1.,0.)); +#21500 = DIRECTION('',(0.,0.,1.)); +#21501 = ORIENTED_EDGE('',*,*,#21502,.T.); +#21502 = EDGE_CURVE('',#21494,#21503,#21505,.T.); +#21503 = VERTEX_POINT('',#21504); +#21504 = CARTESIAN_POINT('',(2.09,-1.2,0.8)); +#21505 = LINE('',#21506,#21507); +#21506 = CARTESIAN_POINT('',(2.09,-1.2,0.95)); +#21507 = VECTOR('',#21508,1.); +#21508 = DIRECTION('',(-0.,-0.,1.)); +#21509 = ORIENTED_EDGE('',*,*,#21510,.T.); +#21510 = EDGE_CURVE('',#21503,#21511,#21513,.T.); +#21511 = VERTEX_POINT('',#21512); +#21512 = CARTESIAN_POINT('',(2.09,-1.2,2.7)); +#21513 = LINE('',#21514,#21515); +#21514 = CARTESIAN_POINT('',(2.09,-1.2,-5.664956351237E-16)); +#21515 = VECTOR('',#21516,1.); +#21516 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#21517 = ORIENTED_EDGE('',*,*,#21518,.T.); +#21518 = EDGE_CURVE('',#21511,#21519,#21521,.T.); +#21519 = VERTEX_POINT('',#21520); +#21520 = CARTESIAN_POINT('',(2.09,-1.2,3.35)); +#21521 = LINE('',#21522,#21523); +#21522 = CARTESIAN_POINT('',(2.09,-1.2,3.35)); +#21523 = VECTOR('',#21524,1.); +#21524 = DIRECTION('',(-0.,-0.,1.)); +#21525 = ORIENTED_EDGE('',*,*,#21526,.T.); +#21526 = EDGE_CURVE('',#21519,#21197,#21527,.T.); +#21527 = LINE('',#21528,#21529); +#21528 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21529 = VECTOR('',#21530,1.); +#21530 = DIRECTION('',(-1.,-0.,-0.)); +#21531 = FACE_BOUND('',#21532,.T.); +#21532 = EDGE_LOOP('',(#21533,#21534)); +#21533 = ORIENTED_EDGE('',*,*,#19185,.F.); +#21534 = ORIENTED_EDGE('',*,*,#21535,.F.); +#21535 = EDGE_CURVE('',#19178,#19159,#21536,.T.); +#21536 = CIRCLE('',#21537,1.1); +#21537 = AXIS2_PLACEMENT_3D('',#21538,#21539,#21540); +#21538 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,1.75)); +#21539 = DIRECTION('',(0.,-1.,0.)); +#21540 = DIRECTION('',(0.,0.,-1.)); +#21541 = PLANE('',#21542); +#21542 = AXIS2_PLACEMENT_3D('',#21543,#21544,#21545); +#21543 = CARTESIAN_POINT('',(0.,-1.2,0.)); +#21544 = DIRECTION('',(-0.,1.,0.)); +#21545 = DIRECTION('',(0.,0.,1.)); +#21546 = ADVANCED_FACE('',(#21547),#21563,.F.); +#21547 = FACE_BOUND('',#21548,.T.); +#21548 = EDGE_LOOP('',(#21549,#21550,#21556,#21557)); +#21549 = ORIENTED_EDGE('',*,*,#21174,.T.); +#21550 = ORIENTED_EDGE('',*,*,#21551,.F.); +#21551 = EDGE_CURVE('',#21197,#21167,#21552,.T.); +#21552 = LINE('',#21553,#21554); +#21553 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21554 = VECTOR('',#21555,1.); +#21555 = DIRECTION('',(-0.,1.,-0.)); +#21556 = ORIENTED_EDGE('',*,*,#21526,.F.); +#21557 = ORIENTED_EDGE('',*,*,#21558,.T.); +#21558 = EDGE_CURVE('',#21519,#21175,#21559,.T.); +#21559 = LINE('',#21560,#21561); +#21560 = CARTESIAN_POINT('',(2.09,-1.2,3.35)); +#21561 = VECTOR('',#21562,1.); +#21562 = DIRECTION('',(-0.,1.,-0.)); +#21563 = PLANE('',#21564); +#21564 = AXIS2_PLACEMENT_3D('',#21565,#21566,#21567); +#21565 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21566 = DIRECTION('',(0.,0.,-1.)); +#21567 = DIRECTION('',(-1.,0.,-0.)); +#21568 = ADVANCED_FACE('',(#21569),#21580,.F.); +#21569 = FACE_BOUND('',#21570,.T.); +#21570 = EDGE_LOOP('',(#21571,#21572,#21578,#21579)); +#21571 = ORIENTED_EDGE('',*,*,#21166,.T.); +#21572 = ORIENTED_EDGE('',*,*,#21573,.T.); +#21573 = EDGE_CURVE('',#21159,#21199,#21574,.T.); +#21574 = LINE('',#21575,#21576); +#21575 = CARTESIAN_POINT('',(-2.09,-1.2,2.7)); +#21576 = VECTOR('',#21577,1.); +#21577 = DIRECTION('',(-0.,-1.,0.)); +#21578 = ORIENTED_EDGE('',*,*,#21196,.F.); +#21579 = ORIENTED_EDGE('',*,*,#21551,.T.); +#21580 = PLANE('',#21581); +#21581 = AXIS2_PLACEMENT_3D('',#21582,#21583,#21584); +#21582 = CARTESIAN_POINT('',(-2.09,-1.2,3.35)); +#21583 = DIRECTION('',(1.,0.,0.)); +#21584 = DIRECTION('',(0.,0.,-1.)); +#21585 = ADVANCED_FACE('',(#21586),#21764,.F.); +#21586 = FACE_BOUND('',#21587,.T.); +#21587 = EDGE_LOOP('',(#21588,#21598,#21606,#21614,#21622,#21630,#21639, + #21648,#21656,#21665,#21673,#21681,#21689,#21698,#21706,#21715, + #21723,#21732,#21740,#21749,#21757)); +#21588 = ORIENTED_EDGE('',*,*,#21589,.T.); +#21589 = EDGE_CURVE('',#21590,#21592,#21594,.T.); +#21590 = VERTEX_POINT('',#21591); +#21591 = CARTESIAN_POINT('',(-2.24,-0.5,0.95)); +#21592 = VERTEX_POINT('',#21593); +#21593 = CARTESIAN_POINT('',(-2.24,-0.9,0.95)); +#21594 = LINE('',#21595,#21596); +#21595 = CARTESIAN_POINT('',(-2.24,-0.35,0.95)); +#21596 = VECTOR('',#21597,1.); +#21597 = DIRECTION('',(0.,-1.,0.)); +#21598 = ORIENTED_EDGE('',*,*,#21599,.F.); +#21599 = EDGE_CURVE('',#21600,#21592,#21602,.T.); +#21600 = VERTEX_POINT('',#21601); +#21601 = CARTESIAN_POINT('',(-2.24,-1.05,0.95)); +#21602 = LINE('',#21603,#21604); +#21603 = CARTESIAN_POINT('',(-2.24,-1.2,0.95)); +#21604 = VECTOR('',#21605,1.); +#21605 = DIRECTION('',(-0.,1.,-0.)); +#21606 = ORIENTED_EDGE('',*,*,#21607,.T.); +#21607 = EDGE_CURVE('',#21600,#21608,#21610,.T.); +#21608 = VERTEX_POINT('',#21609); +#21609 = CARTESIAN_POINT('',(-2.24,-1.05,2.55)); +#21610 = LINE('',#21611,#21612); +#21611 = CARTESIAN_POINT('',(-2.24,-1.05,2.55)); +#21612 = VECTOR('',#21613,1.); +#21613 = DIRECTION('',(-0.,-0.,1.)); +#21614 = ORIENTED_EDGE('',*,*,#21615,.T.); +#21615 = EDGE_CURVE('',#21608,#21616,#21618,.T.); +#21616 = VERTEX_POINT('',#21617); +#21617 = CARTESIAN_POINT('',(-2.24,-0.9,2.55)); +#21618 = LINE('',#21619,#21620); +#21619 = CARTESIAN_POINT('',(-2.24,-1.2,2.55)); +#21620 = VECTOR('',#21621,1.); +#21621 = DIRECTION('',(-0.,1.,-0.)); +#21622 = ORIENTED_EDGE('',*,*,#21623,.T.); +#21623 = EDGE_CURVE('',#21616,#21624,#21626,.T.); +#21624 = VERTEX_POINT('',#21625); +#21625 = CARTESIAN_POINT('',(-2.24,0.2,2.55)); +#21626 = LINE('',#21627,#21628); +#21627 = CARTESIAN_POINT('',(-2.24,-1.05,2.55)); +#21628 = VECTOR('',#21629,1.); +#21629 = DIRECTION('',(0.,1.,0.)); +#21630 = ORIENTED_EDGE('',*,*,#21631,.T.); +#21631 = EDGE_CURVE('',#21624,#21632,#21634,.T.); +#21632 = VERTEX_POINT('',#21633); +#21633 = CARTESIAN_POINT('',(-2.24,0.35,2.4)); +#21634 = CIRCLE('',#21635,0.15); +#21635 = AXIS2_PLACEMENT_3D('',#21636,#21637,#21638); +#21636 = CARTESIAN_POINT('',(-2.24,0.2,2.4)); +#21637 = DIRECTION('',(-1.,-0.,-0.)); +#21638 = DIRECTION('',(0.,0.,-1.)); +#21639 = ORIENTED_EDGE('',*,*,#21640,.T.); +#21640 = EDGE_CURVE('',#21632,#21641,#21643,.T.); +#21641 = VERTEX_POINT('',#21642); +#21642 = CARTESIAN_POINT('',(-2.24,0.5,2.25)); +#21643 = CIRCLE('',#21644,0.15); +#21644 = AXIS2_PLACEMENT_3D('',#21645,#21646,#21647); +#21645 = CARTESIAN_POINT('',(-2.24,0.5,2.4)); +#21646 = DIRECTION('',(1.,0.,0.)); +#21647 = DIRECTION('',(0.,0.,-1.)); +#21648 = ORIENTED_EDGE('',*,*,#21649,.T.); +#21649 = EDGE_CURVE('',#21641,#21650,#21652,.T.); +#21650 = VERTEX_POINT('',#21651); +#21651 = CARTESIAN_POINT('',(-2.24,0.56,2.25)); +#21652 = LINE('',#21653,#21654); +#21653 = CARTESIAN_POINT('',(-2.24,0.35,2.25)); +#21654 = VECTOR('',#21655,1.); +#21655 = DIRECTION('',(0.,1.,0.)); +#21656 = ORIENTED_EDGE('',*,*,#21657,.T.); +#21657 = EDGE_CURVE('',#21650,#21658,#21660,.T.); +#21658 = VERTEX_POINT('',#21659); +#21659 = CARTESIAN_POINT('',(-2.24,0.709829229338,2.392844440202)); +#21660 = CIRCLE('',#21661,0.15); +#21661 = AXIS2_PLACEMENT_3D('',#21662,#21663,#21664); +#21662 = CARTESIAN_POINT('',(-2.24,0.56,2.4)); +#21663 = DIRECTION('',(1.,0.,0.)); +#21664 = DIRECTION('',(0.,0.,-1.)); +#21665 = ORIENTED_EDGE('',*,*,#21666,.T.); +#21666 = EDGE_CURVE('',#21658,#21667,#21669,.T.); +#21667 = VERTEX_POINT('',#21668); +#21668 = CARTESIAN_POINT('',(-2.24,1.31,2.392844440202)); +#21669 = LINE('',#21670,#21671); +#21670 = CARTESIAN_POINT('',(-2.24,0.71,2.392844440202)); +#21671 = VECTOR('',#21672,1.); +#21672 = DIRECTION('',(0.,1.,0.)); +#21673 = ORIENTED_EDGE('',*,*,#21674,.T.); +#21674 = EDGE_CURVE('',#21667,#21675,#21677,.T.); +#21675 = VERTEX_POINT('',#21676); +#21676 = CARTESIAN_POINT('',(-2.24,1.31,1.107155559798)); +#21677 = LINE('',#21678,#21679); +#21678 = CARTESIAN_POINT('',(-2.24,1.31,2.392844440202)); +#21679 = VECTOR('',#21680,1.); +#21680 = DIRECTION('',(0.,-1.686570038849E-16,-1.)); +#21681 = ORIENTED_EDGE('',*,*,#21682,.T.); +#21682 = EDGE_CURVE('',#21675,#21683,#21685,.T.); +#21683 = VERTEX_POINT('',#21684); +#21684 = CARTESIAN_POINT('',(-2.24,0.709829229338,1.107155559798)); +#21685 = LINE('',#21686,#21687); +#21686 = CARTESIAN_POINT('',(-2.24,1.31,1.107155559798)); +#21687 = VECTOR('',#21688,1.); +#21688 = DIRECTION('',(0.,-1.,0.)); +#21689 = ORIENTED_EDGE('',*,*,#21690,.T.); +#21690 = EDGE_CURVE('',#21683,#21691,#21693,.T.); +#21691 = VERTEX_POINT('',#21692); +#21692 = CARTESIAN_POINT('',(-2.24,0.56,1.25)); +#21693 = CIRCLE('',#21694,0.15); +#21694 = AXIS2_PLACEMENT_3D('',#21695,#21696,#21697); +#21695 = CARTESIAN_POINT('',(-2.24,0.56,1.1)); +#21696 = DIRECTION('',(1.,0.,0.)); +#21697 = DIRECTION('',(0.,0.,-1.)); +#21698 = ORIENTED_EDGE('',*,*,#21699,.T.); +#21699 = EDGE_CURVE('',#21691,#21700,#21702,.T.); +#21700 = VERTEX_POINT('',#21701); +#21701 = CARTESIAN_POINT('',(-2.24,0.5,1.25)); +#21702 = LINE('',#21703,#21704); +#21703 = CARTESIAN_POINT('',(-2.24,0.71,1.25)); +#21704 = VECTOR('',#21705,1.); +#21705 = DIRECTION('',(0.,-1.,0.)); +#21706 = ORIENTED_EDGE('',*,*,#21707,.T.); +#21707 = EDGE_CURVE('',#21700,#21708,#21710,.T.); +#21708 = VERTEX_POINT('',#21709); +#21709 = CARTESIAN_POINT('',(-2.24,0.35,1.1)); +#21710 = CIRCLE('',#21711,0.15); +#21711 = AXIS2_PLACEMENT_3D('',#21712,#21713,#21714); +#21712 = CARTESIAN_POINT('',(-2.24,0.5,1.1)); +#21713 = DIRECTION('',(1.,0.,0.)); +#21714 = DIRECTION('',(0.,0.,-1.)); +#21715 = ORIENTED_EDGE('',*,*,#21716,.T.); +#21716 = EDGE_CURVE('',#21708,#21717,#21719,.T.); +#21717 = VERTEX_POINT('',#21718); +#21718 = CARTESIAN_POINT('',(-2.24,0.35,-0.15)); +#21719 = LINE('',#21720,#21721); +#21720 = CARTESIAN_POINT('',(-2.24,0.35,1.25)); +#21721 = VECTOR('',#21722,1.); +#21722 = DIRECTION('',(0.,-1.27553196763E-16,-1.)); +#21723 = ORIENTED_EDGE('',*,*,#21724,.T.); +#21724 = EDGE_CURVE('',#21717,#21725,#21727,.T.); +#21725 = VERTEX_POINT('',#21726); +#21726 = CARTESIAN_POINT('',(-2.24,5.E-02,-0.45)); +#21727 = CIRCLE('',#21728,0.3); +#21728 = AXIS2_PLACEMENT_3D('',#21729,#21730,#21731); +#21729 = CARTESIAN_POINT('',(-2.24,5.E-02,-0.15)); +#21730 = DIRECTION('',(-1.,-0.,-0.)); +#21731 = DIRECTION('',(0.,0.,-1.)); +#21732 = ORIENTED_EDGE('',*,*,#21733,.T.); +#21733 = EDGE_CURVE('',#21725,#21734,#21736,.T.); +#21734 = VERTEX_POINT('',#21735); +#21735 = CARTESIAN_POINT('',(-2.24,-5.E-02,-0.45)); +#21736 = LINE('',#21737,#21738); +#21737 = CARTESIAN_POINT('',(-2.24,0.35,-0.45)); +#21738 = VECTOR('',#21739,1.); +#21739 = DIRECTION('',(0.,-1.,0.)); +#21740 = ORIENTED_EDGE('',*,*,#21741,.T.); +#21741 = EDGE_CURVE('',#21734,#21742,#21744,.T.); +#21742 = VERTEX_POINT('',#21743); +#21743 = CARTESIAN_POINT('',(-2.24,-0.35,-0.15)); +#21744 = CIRCLE('',#21745,0.3); +#21745 = AXIS2_PLACEMENT_3D('',#21746,#21747,#21748); +#21746 = CARTESIAN_POINT('',(-2.24,-5.E-02,-0.15)); +#21747 = DIRECTION('',(-1.,-0.,-0.)); +#21748 = DIRECTION('',(0.,0.,-1.)); +#21749 = ORIENTED_EDGE('',*,*,#21750,.T.); +#21750 = EDGE_CURVE('',#21742,#21751,#21753,.T.); +#21751 = VERTEX_POINT('',#21752); +#21752 = CARTESIAN_POINT('',(-2.24,-0.35,0.8)); +#21753 = LINE('',#21754,#21755); +#21754 = CARTESIAN_POINT('',(-2.24,-0.35,-0.45)); +#21755 = VECTOR('',#21756,1.); +#21756 = DIRECTION('',(0.,-1.161645184806E-16,1.)); +#21757 = ORIENTED_EDGE('',*,*,#21758,.T.); +#21758 = EDGE_CURVE('',#21751,#21590,#21759,.T.); +#21759 = CIRCLE('',#21760,0.15); +#21760 = AXIS2_PLACEMENT_3D('',#21761,#21762,#21763); +#21761 = CARTESIAN_POINT('',(-2.24,-0.5,0.8)); +#21762 = DIRECTION('',(1.,0.,0.)); +#21763 = DIRECTION('',(0.,0.,-1.)); +#21764 = PLANE('',#21765); +#21765 = AXIS2_PLACEMENT_3D('',#21766,#21767,#21768); +#21766 = CARTESIAN_POINT('',(-2.24,-1.2,2.55)); +#21767 = DIRECTION('',(1.,0.,0.)); +#21768 = DIRECTION('',(0.,0.,-1.)); +#21769 = ADVANCED_FACE('',(#21770),#21786,.F.); +#21770 = FACE_BOUND('',#21771,.T.); +#21771 = EDGE_LOOP('',(#21772,#21773,#21779,#21780)); +#21772 = ORIENTED_EDGE('',*,*,#21214,.F.); +#21773 = ORIENTED_EDGE('',*,*,#21774,.T.); +#21774 = EDGE_CURVE('',#21207,#21151,#21775,.T.); +#21775 = LINE('',#21776,#21777); +#21776 = CARTESIAN_POINT('',(-2.09,-1.05,0.8)); +#21777 = VECTOR('',#21778,1.); +#21778 = DIRECTION('',(0.,1.,-0.)); +#21779 = ORIENTED_EDGE('',*,*,#21150,.T.); +#21780 = ORIENTED_EDGE('',*,*,#21781,.T.); +#21781 = EDGE_CURVE('',#21142,#21215,#21782,.T.); +#21782 = LINE('',#21783,#21784); +#21783 = CARTESIAN_POINT('',(-2.09,-1.2,0.762132034356)); +#21784 = VECTOR('',#21785,1.); +#21785 = DIRECTION('',(-0.,-1.,0.)); +#21786 = PLANE('',#21787); +#21787 = AXIS2_PLACEMENT_3D('',#21788,#21789,#21790); +#21788 = CARTESIAN_POINT('',(-2.09,-1.2,0.95)); +#21789 = DIRECTION('',(1.,0.,0.)); +#21790 = DIRECTION('',(0.,0.,-1.)); +#21791 = ADVANCED_FACE('',(#21792),#21808,.F.); +#21792 = FACE_BOUND('',#21793,.T.); +#21793 = EDGE_LOOP('',(#21794,#21795,#21801,#21802)); +#21794 = ORIENTED_EDGE('',*,*,#21133,.T.); +#21795 = ORIENTED_EDGE('',*,*,#21796,.T.); +#21796 = EDGE_CURVE('',#21125,#21232,#21797,.T.); +#21797 = LINE('',#21798,#21799); +#21798 = CARTESIAN_POINT('',(-2.254177870632,-1.2,0.535822129368)); +#21799 = VECTOR('',#21800,1.); +#21800 = DIRECTION('',(-0.,-1.,-0.)); +#21801 = ORIENTED_EDGE('',*,*,#21231,.F.); +#21802 = ORIENTED_EDGE('',*,*,#21803,.T.); +#21803 = EDGE_CURVE('',#21223,#21134,#21804,.T.); +#21804 = LINE('',#21805,#21806); +#21805 = CARTESIAN_POINT('',(-2.133933982822,-1.05,0.656066017178)); +#21806 = VECTOR('',#21807,1.); +#21807 = DIRECTION('',(-0.,1.,0.)); +#21808 = PLANE('',#21809); +#21809 = AXIS2_PLACEMENT_3D('',#21810,#21811,#21812); +#21810 = CARTESIAN_POINT('',(-2.09,-1.2,0.7)); +#21811 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#21812 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#21813 = ADVANCED_FACE('',(#21814),#21830,.F.); +#21814 = FACE_BOUND('',#21815,.T.); +#21815 = EDGE_LOOP('',(#21816,#21817,#21823,#21824)); +#21816 = ORIENTED_EDGE('',*,*,#21116,.T.); +#21817 = ORIENTED_EDGE('',*,*,#21818,.T.); +#21818 = EDGE_CURVE('',#21108,#21249,#21819,.T.); +#21819 = LINE('',#21820,#21821); +#21820 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.15)); +#21821 = VECTOR('',#21822,1.); +#21822 = DIRECTION('',(-0.,-1.,-0.)); +#21823 = ORIENTED_EDGE('',*,*,#21248,.F.); +#21824 = ORIENTED_EDGE('',*,*,#21825,.T.); +#21825 = EDGE_CURVE('',#21240,#21117,#21826,.T.); +#21826 = LINE('',#21827,#21828); +#21827 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.42975611219)); +#21828 = VECTOR('',#21829,1.); +#21829 = DIRECTION('',(-0.,1.,0.)); +#21830 = PLANE('',#21831); +#21831 = AXIS2_PLACEMENT_3D('',#21832,#21833,#21834); +#21832 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.491888146546)); +#21833 = DIRECTION('',(1.,0.,0.)); +#21834 = DIRECTION('',(0.,0.,-1.)); +#21835 = ADVANCED_FACE('',(#21836),#21852,.F.); +#21836 = FACE_BOUND('',#21837,.T.); +#21837 = EDGE_LOOP('',(#21838,#21839,#21845,#21846)); +#21838 = ORIENTED_EDGE('',*,*,#21099,.T.); +#21839 = ORIENTED_EDGE('',*,*,#21840,.T.); +#21840 = EDGE_CURVE('',#21091,#21266,#21841,.T.); +#21841 = LINE('',#21842,#21843); +#21842 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.)); +#21843 = VECTOR('',#21844,1.); +#21844 = DIRECTION('',(-0.,-1.,-0.)); +#21845 = ORIENTED_EDGE('',*,*,#21265,.F.); +#21846 = ORIENTED_EDGE('',*,*,#21847,.T.); +#21847 = EDGE_CURVE('',#21257,#21100,#21848,.T.); +#21848 = LINE('',#21849,#21850); +#21849 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.)); +#21850 = VECTOR('',#21851,1.); +#21851 = DIRECTION('',(0.,1.,-0.)); +#21852 = PLANE('',#21853); +#21853 = AXIS2_PLACEMENT_3D('',#21854,#21855,#21856); +#21854 = CARTESIAN_POINT('',(-2.298111853454,-1.2,0.)); +#21855 = DIRECTION('',(-0.,0.,1.)); +#21856 = DIRECTION('',(1.,0.,0.)); +#21857 = ADVANCED_FACE('',(#21858),#21874,.F.); +#21858 = FACE_BOUND('',#21859,.T.); +#21859 = EDGE_LOOP('',(#21860,#21861,#21867,#21868)); +#21860 = ORIENTED_EDGE('',*,*,#21082,.T.); +#21861 = ORIENTED_EDGE('',*,*,#21862,.T.); +#21862 = EDGE_CURVE('',#21074,#21283,#21863,.T.); +#21863 = LINE('',#21864,#21865); +#21864 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.422093037719)); +#21865 = VECTOR('',#21866,1.); +#21866 = DIRECTION('',(-0.,-1.,-0.)); +#21867 = ORIENTED_EDGE('',*,*,#21282,.F.); +#21868 = ORIENTED_EDGE('',*,*,#21869,.T.); +#21869 = EDGE_CURVE('',#21274,#21083,#21870,.T.); +#21870 = LINE('',#21871,#21872); +#21871 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.15)); +#21872 = VECTOR('',#21873,1.); +#21873 = DIRECTION('',(0.,1.,0.)); +#21874 = PLANE('',#21875); +#21875 = AXIS2_PLACEMENT_3D('',#21876,#21877,#21878); +#21876 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.)); +#21877 = DIRECTION('',(-1.,0.,0.)); +#21878 = DIRECTION('',(0.,0.,1.)); +#21879 = ADVANCED_FACE('',(#21880),#21896,.F.); +#21880 = FACE_BOUND('',#21881,.T.); +#21881 = EDGE_LOOP('',(#21882,#21883,#21889,#21890)); +#21882 = ORIENTED_EDGE('',*,*,#21065,.T.); +#21883 = ORIENTED_EDGE('',*,*,#21884,.T.); +#21884 = EDGE_CURVE('',#21057,#21300,#21885,.T.); +#21885 = LINE('',#21886,#21887); +#21886 = CARTESIAN_POINT('',(-1.566582326008,-1.2,0.558111738345)); +#21887 = VECTOR('',#21888,1.); +#21888 = DIRECTION('',(-0.,-1.,-0.)); +#21889 = ORIENTED_EDGE('',*,*,#21299,.F.); +#21890 = ORIENTED_EDGE('',*,*,#21891,.T.); +#21891 = EDGE_CURVE('',#21291,#21066,#21892,.T.); +#21892 = LINE('',#21893,#21894); +#21893 = CARTESIAN_POINT('',(-1.533417673992,-1.2,0.518763846123)); +#21894 = VECTOR('',#21895,1.); +#21895 = DIRECTION('',(0.,1.,0.)); +#21896 = PLANE('',#21897); +#21897 = AXIS2_PLACEMENT_3D('',#21898,#21899,#21900); +#21898 = CARTESIAN_POINT('',(-1.498111853454,-1.2,0.476875584468)); +#21899 = DIRECTION('',(-0.764627863082,0.,-0.644472056026)); +#21900 = DIRECTION('',(-0.644472056026,0.,0.764627863082)); +#21901 = ADVANCED_FACE('',(#21902),#21918,.F.); +#21902 = FACE_BOUND('',#21903,.T.); +#21903 = EDGE_LOOP('',(#21904,#21905,#21911,#21912)); +#21904 = ORIENTED_EDGE('',*,*,#21048,.T.); +#21905 = ORIENTED_EDGE('',*,*,#21906,.T.); +#21906 = EDGE_CURVE('',#21040,#21317,#21907,.T.); +#21907 = LINE('',#21908,#21909); +#21908 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.7)); +#21909 = VECTOR('',#21910,1.); +#21910 = DIRECTION('',(-0.,-1.,-0.)); +#21911 = ORIENTED_EDGE('',*,*,#21316,.F.); +#21912 = ORIENTED_EDGE('',*,*,#21913,.T.); +#21913 = EDGE_CURVE('',#21308,#21049,#21914,.T.); +#21914 = LINE('',#21915,#21916); +#21915 = CARTESIAN_POINT('',(-1.601888146546,-1.05,0.654782546749)); +#21916 = VECTOR('',#21917,1.); +#21917 = DIRECTION('',(0.,1.,0.)); +#21918 = PLANE('',#21919); +#21919 = AXIS2_PLACEMENT_3D('',#21920,#21921,#21922); +#21920 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.6)); +#21921 = DIRECTION('',(-1.,0.,0.)); +#21922 = DIRECTION('',(0.,0.,1.)); +#21923 = ADVANCED_FACE('',(#21924),#21940,.F.); +#21924 = FACE_BOUND('',#21925,.T.); +#21925 = EDGE_LOOP('',(#21926,#21927,#21933,#21934)); +#21926 = ORIENTED_EDGE('',*,*,#21031,.T.); +#21927 = ORIENTED_EDGE('',*,*,#21928,.T.); +#21928 = EDGE_CURVE('',#21023,#21334,#21929,.T.); +#21929 = LINE('',#21930,#21931); +#21930 = CARTESIAN_POINT('',(-1.371633435948,-1.2,0.85)); +#21931 = VECTOR('',#21932,1.); +#21932 = DIRECTION('',(-0.,-1.,0.)); +#21933 = ORIENTED_EDGE('',*,*,#21333,.F.); +#21934 = ORIENTED_EDGE('',*,*,#21935,.T.); +#21935 = EDGE_CURVE('',#21325,#21032,#21936,.T.); +#21936 = LINE('',#21937,#21938); +#21937 = CARTESIAN_POINT('',(-1.451888146546,-1.05,0.85)); +#21938 = VECTOR('',#21939,1.); +#21939 = DIRECTION('',(0.,1.,-0.)); +#21940 = PLANE('',#21941); +#21941 = AXIS2_PLACEMENT_3D('',#21942,#21943,#21944); +#21942 = CARTESIAN_POINT('',(-1.601888146546,-1.2,0.85)); +#21943 = DIRECTION('',(-0.,0.,1.)); +#21944 = DIRECTION('',(1.,0.,0.)); +#21945 = ADVANCED_FACE('',(#21946),#21962,.F.); +#21946 = FACE_BOUND('',#21947,.T.); +#21947 = EDGE_LOOP('',(#21948,#21949,#21955,#21956)); +#21948 = ORIENTED_EDGE('',*,*,#21350,.F.); +#21949 = ORIENTED_EDGE('',*,*,#21950,.T.); +#21950 = EDGE_CURVE('',#21342,#21015,#21951,.T.); +#21951 = LINE('',#21952,#21953); +#21952 = CARTESIAN_POINT('',(-1.256939256486,-1.05,0.796670808404)); +#21953 = VECTOR('',#21954,1.); +#21954 = DIRECTION('',(0.,1.,-0.)); +#21955 = ORIENTED_EDGE('',*,*,#21014,.T.); +#21956 = ORIENTED_EDGE('',*,*,#21957,.F.); +#21957 = EDGE_CURVE('',#21351,#21007,#21958,.T.); +#21958 = LINE('',#21959,#21960); +#21959 = CARTESIAN_POINT('',(-0.711888146546,-1.2,0.15)); +#21960 = VECTOR('',#21961,1.); +#21961 = DIRECTION('',(-0.,1.,-0.)); +#21962 = PLANE('',#21963); +#21963 = AXIS2_PLACEMENT_3D('',#21964,#21965,#21966); +#21964 = CARTESIAN_POINT('',(-1.301888146546,-1.2,0.85)); +#21965 = DIRECTION('',(0.764627863082,0.,0.644472056026)); +#21966 = DIRECTION('',(0.644472056026,0.,-0.764627863082)); +#21967 = ADVANCED_FACE('',(#21968),#21979,.F.); +#21968 = FACE_BOUND('',#21969,.T.); +#21969 = EDGE_LOOP('',(#21970,#21971,#21977,#21978)); +#21970 = ORIENTED_EDGE('',*,*,#21006,.T.); +#21971 = ORIENTED_EDGE('',*,*,#21972,.F.); +#21972 = EDGE_CURVE('',#21359,#20999,#21973,.T.); +#21973 = LINE('',#21974,#21975); +#21974 = CARTESIAN_POINT('',(0.711888146546,-1.2,0.15)); +#21975 = VECTOR('',#21976,1.); +#21976 = DIRECTION('',(-0.,1.,-0.)); +#21977 = ORIENTED_EDGE('',*,*,#21358,.F.); +#21978 = ORIENTED_EDGE('',*,*,#21957,.T.); +#21979 = PLANE('',#21980); +#21980 = AXIS2_PLACEMENT_3D('',#21981,#21982,#21983); +#21981 = CARTESIAN_POINT('',(-0.711888146546,-1.2,0.15)); +#21982 = DIRECTION('',(-0.,0.,1.)); +#21983 = DIRECTION('',(1.,0.,0.)); +#21984 = ADVANCED_FACE('',(#21985),#21996,.F.); +#21985 = FACE_BOUND('',#21986,.T.); +#21986 = EDGE_LOOP('',(#21987,#21988,#21994,#21995)); +#21987 = ORIENTED_EDGE('',*,*,#20998,.T.); +#21988 = ORIENTED_EDGE('',*,*,#21989,.T.); +#21989 = EDGE_CURVE('',#20990,#21367,#21990,.T.); +#21990 = LINE('',#21991,#21992); +#21991 = CARTESIAN_POINT('',(1.256939256486,-1.2,0.796670808404)); +#21992 = VECTOR('',#21993,1.); +#21993 = DIRECTION('',(-0.,-1.,-0.)); +#21994 = ORIENTED_EDGE('',*,*,#21366,.F.); +#21995 = ORIENTED_EDGE('',*,*,#21972,.T.); +#21996 = PLANE('',#21997); +#21997 = AXIS2_PLACEMENT_3D('',#21998,#21999,#22000); +#21998 = CARTESIAN_POINT('',(1.301888146546,-1.2,0.85)); +#21999 = DIRECTION('',(-0.764627863082,0.,0.644472056026)); +#22000 = DIRECTION('',(0.644472056026,0.,0.764627863082)); +#22001 = ADVANCED_FACE('',(#22002),#22018,.F.); +#22002 = FACE_BOUND('',#22003,.T.); +#22003 = EDGE_LOOP('',(#22004,#22005,#22011,#22012)); +#22004 = ORIENTED_EDGE('',*,*,#20981,.T.); +#22005 = ORIENTED_EDGE('',*,*,#22006,.T.); +#22006 = EDGE_CURVE('',#20973,#21384,#22007,.T.); +#22007 = LINE('',#22008,#22009); +#22008 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.85)); +#22009 = VECTOR('',#22010,1.); +#22010 = DIRECTION('',(-0.,-1.,0.)); +#22011 = ORIENTED_EDGE('',*,*,#21383,.F.); +#22012 = ORIENTED_EDGE('',*,*,#22013,.T.); +#22013 = EDGE_CURVE('',#21375,#20982,#22014,.T.); +#22014 = LINE('',#22015,#22016); +#22015 = CARTESIAN_POINT('',(1.371633435948,-1.05,0.85)); +#22016 = VECTOR('',#22017,1.); +#22017 = DIRECTION('',(0.,1.,-0.)); +#22018 = PLANE('',#22019); +#22019 = AXIS2_PLACEMENT_3D('',#22020,#22021,#22022); +#22020 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.85)); +#22021 = DIRECTION('',(0.,0.,1.)); +#22022 = DIRECTION('',(1.,0.,-0.)); +#22023 = ADVANCED_FACE('',(#22024),#22040,.F.); +#22024 = FACE_BOUND('',#22025,.T.); +#22025 = EDGE_LOOP('',(#22026,#22027,#22033,#22034)); +#22026 = ORIENTED_EDGE('',*,*,#20964,.T.); +#22027 = ORIENTED_EDGE('',*,*,#22028,.T.); +#22028 = EDGE_CURVE('',#20956,#21401,#22029,.T.); +#22029 = LINE('',#22030,#22031); +#22030 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.65222187009)); +#22031 = VECTOR('',#22032,1.); +#22032 = DIRECTION('',(-0.,-1.,0.)); +#22033 = ORIENTED_EDGE('',*,*,#21400,.F.); +#22034 = ORIENTED_EDGE('',*,*,#22035,.T.); +#22035 = EDGE_CURVE('',#21392,#20965,#22036,.T.); +#22036 = LINE('',#22037,#22038); +#22037 = CARTESIAN_POINT('',(1.601888146546,-1.05,0.7)); +#22038 = VECTOR('',#22039,1.); +#22039 = DIRECTION('',(0.,1.,-0.)); +#22040 = PLANE('',#22041); +#22041 = AXIS2_PLACEMENT_3D('',#22042,#22043,#22044); +#22042 = CARTESIAN_POINT('',(1.601888146546,-1.2,0.6)); +#22043 = DIRECTION('',(1.,0.,1.734723475977E-15)); +#22044 = DIRECTION('',(1.734723475977E-15,0.,-1.)); +#22045 = ADVANCED_FACE('',(#22046),#22062,.F.); +#22046 = FACE_BOUND('',#22047,.T.); +#22047 = EDGE_LOOP('',(#22048,#22049,#22055,#22056)); +#22048 = ORIENTED_EDGE('',*,*,#20947,.T.); +#22049 = ORIENTED_EDGE('',*,*,#22050,.T.); +#22050 = EDGE_CURVE('',#20939,#21418,#22051,.T.); +#22051 = LINE('',#22052,#22053); +#22052 = CARTESIAN_POINT('',(1.53431899851,-1.2,0.514720505512)); +#22053 = VECTOR('',#22054,1.); +#22054 = DIRECTION('',(-0.,-1.,-0.)); +#22055 = ORIENTED_EDGE('',*,*,#21417,.F.); +#22056 = ORIENTED_EDGE('',*,*,#22057,.T.); +#22057 = EDGE_CURVE('',#21409,#20948,#22058,.T.); +#22058 = LINE('',#22059,#22060); +#22059 = CARTESIAN_POINT('',(1.569457294581,-1.05,0.559068794831)); +#22060 = VECTOR('',#22061,1.); +#22061 = DIRECTION('',(-0.,1.,0.)); +#22062 = PLANE('',#22063); +#22063 = AXIS2_PLACEMENT_3D('',#22064,#22065,#22066); +#22064 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.473789300343)); +#22065 = DIRECTION('',(0.783794320238,0.,-0.621020501725)); +#22066 = DIRECTION('',(-0.621020501725,0.,-0.783794320238)); +#22067 = ADVANCED_FACE('',(#22068),#22084,.F.); +#22068 = FACE_BOUND('',#22069,.T.); +#22069 = EDGE_LOOP('',(#22070,#22071,#22077,#22078)); +#22070 = ORIENTED_EDGE('',*,*,#20930,.T.); +#22071 = ORIENTED_EDGE('',*,*,#22072,.T.); +#22072 = EDGE_CURVE('',#20922,#21435,#22073,.T.); +#22073 = LINE('',#22074,#22075); +#22074 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.15)); +#22075 = VECTOR('',#22076,1.); +#22076 = DIRECTION('',(-0.,-1.,-0.)); +#22077 = ORIENTED_EDGE('',*,*,#21434,.F.); +#22078 = ORIENTED_EDGE('',*,*,#22079,.T.); +#22079 = EDGE_CURVE('',#21426,#20931,#22080,.T.); +#22080 = LINE('',#22081,#22082); +#22081 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.421567430253)); +#22082 = VECTOR('',#22083,1.); +#22083 = DIRECTION('',(0.,1.,0.)); +#22084 = PLANE('',#22085); +#22085 = AXIS2_PLACEMENT_3D('',#22086,#22087,#22088); +#22086 = CARTESIAN_POINT('',(1.501888146546,-1.2,0.)); +#22087 = DIRECTION('',(1.,0.,-0.)); +#22088 = DIRECTION('',(-0.,0.,-1.)); +#22089 = ADVANCED_FACE('',(#22090),#22106,.F.); +#22090 = FACE_BOUND('',#22091,.T.); +#22091 = EDGE_LOOP('',(#22092,#22093,#22099,#22100)); +#22092 = ORIENTED_EDGE('',*,*,#20913,.T.); +#22093 = ORIENTED_EDGE('',*,*,#22094,.T.); +#22094 = EDGE_CURVE('',#20905,#21452,#22095,.T.); +#22095 = LINE('',#22096,#22097); +#22096 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.)); +#22097 = VECTOR('',#22098,1.); +#22098 = DIRECTION('',(-0.,-1.,-0.)); +#22099 = ORIENTED_EDGE('',*,*,#21451,.F.); +#22100 = ORIENTED_EDGE('',*,*,#22101,.T.); +#22101 = EDGE_CURVE('',#21443,#20914,#22102,.T.); +#22102 = LINE('',#22103,#22104); +#22103 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.)); +#22104 = VECTOR('',#22105,1.); +#22105 = DIRECTION('',(-0.,1.,0.)); +#22106 = PLANE('',#22107); +#22107 = AXIS2_PLACEMENT_3D('',#22108,#22109,#22110); +#22108 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.)); +#22109 = DIRECTION('',(0.,0.,1.)); +#22110 = DIRECTION('',(1.,0.,-0.)); +#22111 = ADVANCED_FACE('',(#22112),#22128,.F.); +#22112 = FACE_BOUND('',#22113,.T.); +#22113 = EDGE_LOOP('',(#22114,#22115,#22121,#22122)); +#22114 = ORIENTED_EDGE('',*,*,#20896,.T.); +#22115 = ORIENTED_EDGE('',*,*,#22116,.T.); +#22116 = EDGE_CURVE('',#20888,#21469,#22117,.T.); +#22117 = LINE('',#22118,#22119); +#22118 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.419360286527)); +#22119 = VECTOR('',#22120,1.); +#22120 = DIRECTION('',(-0.,-1.,-0.)); +#22121 = ORIENTED_EDGE('',*,*,#21468,.F.); +#22122 = ORIENTED_EDGE('',*,*,#22123,.T.); +#22123 = EDGE_CURVE('',#21460,#20897,#22124,.T.); +#22124 = LINE('',#22125,#22126); +#22125 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.15)); +#22126 = VECTOR('',#22127,1.); +#22127 = DIRECTION('',(0.,1.,0.)); +#22128 = PLANE('',#22129); +#22129 = AXIS2_PLACEMENT_3D('',#22130,#22131,#22132); +#22130 = CARTESIAN_POINT('',(2.301888146546,-1.2,0.491888146546)); +#22131 = DIRECTION('',(-1.,0.,-0.)); +#22132 = DIRECTION('',(0.,0.,1.)); +#22133 = ADVANCED_FACE('',(#22134),#22150,.F.); +#22134 = FACE_BOUND('',#22135,.T.); +#22135 = EDGE_LOOP('',(#22136,#22137,#22143,#22144)); +#22136 = ORIENTED_EDGE('',*,*,#20879,.T.); +#22137 = ORIENTED_EDGE('',*,*,#22138,.T.); +#22138 = EDGE_CURVE('',#20871,#21486,#22139,.T.); +#22139 = LINE('',#22140,#22141); +#22140 = CARTESIAN_POINT('',(2.146846924741,-1.2,0.614731314538)); +#22141 = VECTOR('',#22142,1.); +#22142 = DIRECTION('',(-0.,-1.,-0.)); +#22143 = ORIENTED_EDGE('',*,*,#21485,.F.); +#22144 = ORIENTED_EDGE('',*,*,#22145,.T.); +#22145 = EDGE_CURVE('',#21477,#20880,#22146,.T.); +#22146 = LINE('',#22147,#22148); +#22147 = CARTESIAN_POINT('',(2.245041221804,-1.2,0.536929434563)); +#22148 = VECTOR('',#22149,1.); +#22149 = DIRECTION('',(0.,1.,0.)); +#22150 = PLANE('',#22151); +#22151 = AXIS2_PLACEMENT_3D('',#22152,#22153,#22154); +#22152 = CARTESIAN_POINT('',(2.09,-1.2,0.659772602556)); +#22153 = DIRECTION('',(-0.621020501725,0.,-0.783794320238)); +#22154 = DIRECTION('',(-0.783794320238,0.,0.621020501725)); +#22155 = ADVANCED_FACE('',(#22156),#22172,.F.); +#22156 = FACE_BOUND('',#22157,.T.); +#22157 = EDGE_LOOP('',(#22158,#22159,#22165,#22166)); +#22158 = ORIENTED_EDGE('',*,*,#20862,.T.); +#22159 = ORIENTED_EDGE('',*,*,#22160,.T.); +#22160 = EDGE_CURVE('',#20853,#21503,#22161,.T.); +#22161 = LINE('',#22162,#22163); +#22162 = CARTESIAN_POINT('',(2.09,-1.2,0.8)); +#22163 = VECTOR('',#22164,1.); +#22164 = DIRECTION('',(-0.,-1.,-0.)); +#22165 = ORIENTED_EDGE('',*,*,#21502,.F.); +#22166 = ORIENTED_EDGE('',*,*,#22167,.T.); +#22167 = EDGE_CURVE('',#21494,#20863,#22168,.T.); +#22168 = LINE('',#22169,#22170); +#22169 = CARTESIAN_POINT('',(2.09,-1.05,0.732300462574)); +#22170 = VECTOR('',#22171,1.); +#22171 = DIRECTION('',(0.,1.,0.)); +#22172 = PLANE('',#22173); +#22173 = AXIS2_PLACEMENT_3D('',#22174,#22175,#22176); +#22174 = CARTESIAN_POINT('',(2.09,-1.2,0.95)); +#22175 = DIRECTION('',(-1.,0.,-0.)); +#22176 = DIRECTION('',(0.,0.,1.)); +#22177 = ADVANCED_FACE('',(#22178),#22189,.F.); +#22178 = FACE_BOUND('',#22179,.T.); +#22179 = EDGE_LOOP('',(#22180,#22181,#22187,#22188)); +#22180 = ORIENTED_EDGE('',*,*,#21518,.F.); +#22181 = ORIENTED_EDGE('',*,*,#22182,.T.); +#22182 = EDGE_CURVE('',#21511,#20855,#22183,.T.); +#22183 = LINE('',#22184,#22185); +#22184 = CARTESIAN_POINT('',(2.09,-1.05,2.7)); +#22185 = VECTOR('',#22186,1.); +#22186 = DIRECTION('',(0.,1.,0.)); +#22187 = ORIENTED_EDGE('',*,*,#21182,.T.); +#22188 = ORIENTED_EDGE('',*,*,#21558,.F.); +#22189 = PLANE('',#22190); +#22190 = AXIS2_PLACEMENT_3D('',#22191,#22192,#22193); +#22191 = CARTESIAN_POINT('',(2.09,-1.2,3.35)); +#22192 = DIRECTION('',(-1.,0.,-0.)); +#22193 = DIRECTION('',(0.,0.,1.)); +#22194 = ADVANCED_FACE('',(#22195),#22201,.F.); +#22195 = FACE_BOUND('',#22196,.F.); +#22196 = EDGE_LOOP('',(#22197,#22198,#22199,#22200)); +#22197 = ORIENTED_EDGE('',*,*,#20843,.T.); +#22198 = ORIENTED_EDGE('',*,*,#19158,.F.); +#22199 = ORIENTED_EDGE('',*,*,#21535,.F.); +#22200 = ORIENTED_EDGE('',*,*,#19177,.T.); +#22201 = CYLINDRICAL_SURFACE('',#22202,1.1); +#22202 = AXIS2_PLACEMENT_3D('',#22203,#22204,#22205); +#22203 = CARTESIAN_POINT('',(-4.336808689942E-16,-1.2,1.75)); +#22204 = DIRECTION('',(-0.,1.,-0.)); +#22205 = DIRECTION('',(0.,0.,1.)); +#22206 = ADVANCED_FACE('',(#22207),#22243,.F.); +#22207 = FACE_BOUND('',#22208,.F.); +#22208 = EDGE_LOOP('',(#22209,#22216,#22217,#22242)); +#22209 = ORIENTED_EDGE('',*,*,#22210,.F.); +#22210 = EDGE_CURVE('',#21592,#21151,#22211,.T.); +#22211 = ( BOUNDED_CURVE() B_SPLINE_CURVE(3,(#22212,#22213,#22214,#22215 +),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((4,4),(4.712388980385 +,6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.804737854124,0.804737854124,1.)) REPRESENTATION_ITEM('') ); +#22212 = CARTESIAN_POINT('',(-2.24,-0.9,0.95)); +#22213 = CARTESIAN_POINT('',(-2.152132034356,-0.987867965644,0.95)); +#22214 = CARTESIAN_POINT('',(-2.09,-1.05,0.887867965644)); +#22215 = CARTESIAN_POINT('',(-2.09,-1.05,0.8)); +#22216 = ORIENTED_EDGE('',*,*,#21599,.F.); +#22217 = ORIENTED_EDGE('',*,*,#22218,.F.); +#22218 = EDGE_CURVE('',#21207,#21600,#22219,.T.); +#22219 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#22220,#22221,#22222,#22223, + #22224,#22225,#22226,#22227,#22228,#22229,#22230,#22231,#22232, + #22233,#22234,#22235,#22236,#22237,#22238,#22239,#22240,#22241), + .UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,4),(1.084202172486E-19, + 4.99171192254E-05,9.993732101126E-05,1.480030705932E-04, + 1.893609445722E-04,2.28234138211E-04,2.70993992285E-04, + 3.178689716183E-04),.UNSPECIFIED.); +#22220 = CARTESIAN_POINT('',(-2.09,-1.2,0.8)); +#22221 = CARTESIAN_POINT('',(-2.09,-1.2,0.816639039742)); +#22222 = CARTESIAN_POINT('',(-2.092846548199,-1.200072614227, + 0.83350563565)); +#22223 = CARTESIAN_POINT('',(-2.098305552793,-1.199769882796, + 0.849220764222)); +#22224 = CARTESIAN_POINT('',(-2.103770410972,-1.199466826753, + 0.864952743826)); +#22225 = CARTESIAN_POINT('',(-2.112041957459,-1.198740752484, + 0.879994476019)); +#22226 = CARTESIAN_POINT('',(-2.12226861295,-1.196488008445, + 0.892947945126)); +#22227 = CARTESIAN_POINT('',(-2.132074742763,-1.194327898476, + 0.905368760486)); +#22228 = CARTESIAN_POINT('',(-2.144042216569,-1.190593429435, + 0.916235311026)); +#22229 = CARTESIAN_POINT('',(-2.156310647248,-1.184547010601, + 0.924483301033)); +#22230 = CARTESIAN_POINT('',(-2.166909695111,-1.179323336579, + 0.931608975304)); +#22231 = CARTESIAN_POINT('',(-2.177996953936,-1.17220128737, + 0.937005664726)); +#22232 = CARTESIAN_POINT('',(-2.188054120803,-1.163513829085, + 0.940718249117)); +#22233 = CARTESIAN_POINT('',(-2.197540880834,-1.155319092623, + 0.944220268888)); +#22234 = CARTESIAN_POINT('',(-2.206347159757,-1.145556519211, + 0.946365614675)); +#22235 = CARTESIAN_POINT('',(-2.213675208525,-1.134878989134, + 0.947671951818)); +#22236 = CARTESIAN_POINT('',(-2.221733194097,-1.123137885051, + 0.949108411398)); +#22237 = CARTESIAN_POINT('',(-2.228209675407,-1.110024048056, + 0.949601622777)); +#22238 = CARTESIAN_POINT('',(-2.232637986607,-1.096415566104, + 0.949819226933)); +#22239 = CARTESIAN_POINT('',(-2.237484875668,-1.081520767764, + 0.950057399716)); +#22240 = CARTESIAN_POINT('',(-2.24,-1.065665378305,0.95)); +#22241 = CARTESIAN_POINT('',(-2.24,-1.05,0.95)); +#22242 = ORIENTED_EDGE('',*,*,#21774,.T.); +#22243 = CYLINDRICAL_SURFACE('',#22244,0.15); +#22244 = AXIS2_PLACEMENT_3D('',#22245,#22246,#22247); +#22245 = CARTESIAN_POINT('',(-2.24,-1.2,0.8)); +#22246 = DIRECTION('',(0.,-1.,0.)); +#22247 = DIRECTION('',(0.,0.,-1.)); +#22248 = ADVANCED_FACE('',(#22249),#22285,.F.); +#22249 = FACE_BOUND('',#22250,.F.); +#22250 = EDGE_LOOP('',(#22251,#22276,#22277,#22284)); +#22251 = ORIENTED_EDGE('',*,*,#22252,.F.); +#22252 = EDGE_CURVE('',#21608,#21199,#22253,.T.); +#22253 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#22254,#22255,#22256,#22257, + #22258,#22259,#22260,#22261,#22262,#22263,#22264,#22265,#22266, + #22267,#22268,#22269,#22270,#22271,#22272,#22273,#22274,#22275), + .UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,4),(0.,4.99171192254E-05, + 9.993732101126E-05,1.480030705932E-04,1.893609445722E-04, + 2.28234138211E-04,2.70993992285E-04,3.178689716183E-04), + .UNSPECIFIED.); +#22254 = CARTESIAN_POINT('',(-2.24,-1.05,2.55)); +#22255 = CARTESIAN_POINT('',(-2.24,-1.066639039742,2.55)); +#22256 = CARTESIAN_POINT('',(-2.237153451801,-1.08350563565, + 2.549927385773)); +#22257 = CARTESIAN_POINT('',(-2.231694447207,-1.099220764222, + 2.550230117204)); +#22258 = CARTESIAN_POINT('',(-2.226229589028,-1.114952743826, + 2.550533173247)); +#22259 = CARTESIAN_POINT('',(-2.217958042541,-1.129994476019, + 2.551259247516)); +#22260 = CARTESIAN_POINT('',(-2.20773138705,-1.142947945126, + 2.553511991555)); +#22261 = CARTESIAN_POINT('',(-2.197925257237,-1.155368760486, + 2.555672101524)); +#22262 = CARTESIAN_POINT('',(-2.185957783431,-1.166235311026, + 2.559406570565)); +#22263 = CARTESIAN_POINT('',(-2.173689352752,-1.174483301033, + 2.565452989399)); +#22264 = CARTESIAN_POINT('',(-2.163090304889,-1.181608975304, + 2.570676663421)); +#22265 = CARTESIAN_POINT('',(-2.152003046064,-1.187005664726, + 2.57779871263)); +#22266 = CARTESIAN_POINT('',(-2.141945879197,-1.190718249117, + 2.586486170915)); +#22267 = CARTESIAN_POINT('',(-2.132459119166,-1.194220268888, + 2.594680907377)); +#22268 = CARTESIAN_POINT('',(-2.123652840243,-1.196365614675, + 2.604443480789)); +#22269 = CARTESIAN_POINT('',(-2.116324791475,-1.197671951818, + 2.615121010866)); +#22270 = CARTESIAN_POINT('',(-2.108266805903,-1.199108411398, + 2.626862114949)); +#22271 = CARTESIAN_POINT('',(-2.101790324593,-1.199601622777, + 2.639975951944)); +#22272 = CARTESIAN_POINT('',(-2.097362013393,-1.199819226933, + 2.653584433896)); +#22273 = CARTESIAN_POINT('',(-2.092515124332,-1.200057399716, + 2.668479232236)); +#22274 = CARTESIAN_POINT('',(-2.09,-1.2,2.684334621695)); +#22275 = CARTESIAN_POINT('',(-2.09,-1.2,2.7)); +#22276 = ORIENTED_EDGE('',*,*,#21615,.T.); +#22277 = ORIENTED_EDGE('',*,*,#22278,.F.); +#22278 = EDGE_CURVE('',#21159,#21616,#22279,.T.); +#22279 = ( BOUNDED_CURVE() B_SPLINE_CURVE(3,(#22280,#22281,#22282,#22283 +),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((4,4),(0., +1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.804737854124,0.804737854124,1.)) REPRESENTATION_ITEM('') ); +#22280 = CARTESIAN_POINT('',(-2.09,-1.05,2.7)); +#22281 = CARTESIAN_POINT('',(-2.09,-1.05,2.612132034356)); +#22282 = CARTESIAN_POINT('',(-2.152132034356,-0.987867965644,2.55)); +#22283 = CARTESIAN_POINT('',(-2.24,-0.9,2.55)); +#22284 = ORIENTED_EDGE('',*,*,#21573,.T.); +#22285 = CYLINDRICAL_SURFACE('',#22286,0.15); +#22286 = AXIS2_PLACEMENT_3D('',#22287,#22288,#22289); +#22287 = CARTESIAN_POINT('',(-2.24,-1.2,2.7)); +#22288 = DIRECTION('',(0.,-1.,0.)); +#22289 = DIRECTION('',(0.,0.,-1.)); +#22290 = ADVANCED_FACE('',(#22291),#22327,.F.); +#22291 = FACE_BOUND('',#22292,.F.); +#22292 = EDGE_LOOP('',(#22293,#22318,#22319,#22326)); +#22293 = ORIENTED_EDGE('',*,*,#22294,.F.); +#22294 = EDGE_CURVE('',#19692,#21503,#22295,.T.); +#22295 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#22296,#22297,#22298,#22299, + #22300,#22301,#22302,#22303,#22304,#22305,#22306,#22307,#22308, + #22309,#22310,#22311,#22312,#22313,#22314,#22315,#22316,#22317), + .UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,4),(4.336808689942E-19, + 4.99171192254E-05,9.993732101126E-05,1.480030705932E-04, + 1.893609445722E-04,2.28234138211E-04,2.70993992285E-04, + 3.178689716183E-04),.UNSPECIFIED.); +#22296 = CARTESIAN_POINT('',(2.24,-1.05,0.95)); +#22297 = CARTESIAN_POINT('',(2.24,-1.066639039742,0.95)); +#22298 = CARTESIAN_POINT('',(2.237153451801,-1.08350563565, + 0.950072614227)); +#22299 = CARTESIAN_POINT('',(2.231694447207,-1.099220764222, + 0.949769882796)); +#22300 = CARTESIAN_POINT('',(2.226229589028,-1.114952743826, + 0.949466826753)); +#22301 = CARTESIAN_POINT('',(2.217958042541,-1.129994476019, + 0.948740752484)); +#22302 = CARTESIAN_POINT('',(2.20773138705,-1.142947945126, + 0.946488008445)); +#22303 = CARTESIAN_POINT('',(2.197925257237,-1.155368760486, + 0.944327898476)); +#22304 = CARTESIAN_POINT('',(2.185957783431,-1.166235311026, + 0.940593429435)); +#22305 = CARTESIAN_POINT('',(2.173689352752,-1.174483301033, + 0.934547010601)); +#22306 = CARTESIAN_POINT('',(2.163090304889,-1.181608975304, + 0.929323336579)); +#22307 = CARTESIAN_POINT('',(2.152003046064,-1.187005664726, + 0.92220128737)); +#22308 = CARTESIAN_POINT('',(2.141945879197,-1.190718249117, + 0.913513829085)); +#22309 = CARTESIAN_POINT('',(2.132459119166,-1.194220268888, + 0.905319092623)); +#22310 = CARTESIAN_POINT('',(2.123652840243,-1.196365614675, + 0.895556519211)); +#22311 = CARTESIAN_POINT('',(2.116324791475,-1.197671951818, + 0.884878989134)); +#22312 = CARTESIAN_POINT('',(2.108266805903,-1.199108411398, + 0.873137885051)); +#22313 = CARTESIAN_POINT('',(2.101790324593,-1.199601622777, + 0.860024048056)); +#22314 = CARTESIAN_POINT('',(2.097362013393,-1.199819226933, + 0.846415566104)); +#22315 = CARTESIAN_POINT('',(2.092515124332,-1.200057399716, + 0.831520767764)); +#22316 = CARTESIAN_POINT('',(2.09,-1.2,0.815665378305)); +#22317 = CARTESIAN_POINT('',(2.09,-1.2,0.8)); +#22318 = ORIENTED_EDGE('',*,*,#19699,.T.); +#22319 = ORIENTED_EDGE('',*,*,#22320,.F.); +#22320 = EDGE_CURVE('',#20853,#19700,#22321,.T.); +#22321 = ( BOUNDED_CURVE() B_SPLINE_CURVE(3,(#22322,#22323,#22324,#22325 +),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((4,4),(0., +1.570796326795),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.804737854124,0.804737854124,1.)) REPRESENTATION_ITEM('') ); +#22322 = CARTESIAN_POINT('',(2.09,-1.05,0.8)); +#22323 = CARTESIAN_POINT('',(2.09,-1.05,0.887867965644)); +#22324 = CARTESIAN_POINT('',(2.152132034356,-0.987867965644,0.95)); +#22325 = CARTESIAN_POINT('',(2.24,-0.9,0.95)); +#22326 = ORIENTED_EDGE('',*,*,#22160,.T.); +#22327 = CYLINDRICAL_SURFACE('',#22328,0.15); +#22328 = AXIS2_PLACEMENT_3D('',#22329,#22330,#22331); +#22329 = CARTESIAN_POINT('',(2.24,-1.2,0.8)); +#22330 = DIRECTION('',(0.,-1.,0.)); +#22331 = DIRECTION('',(0.,0.,-1.)); +#22332 = ADVANCED_FACE('',(#22333),#22369,.F.); +#22333 = FACE_BOUND('',#22334,.F.); +#22334 = EDGE_LOOP('',(#22335,#22342,#22343,#22368)); +#22335 = ORIENTED_EDGE('',*,*,#22336,.F.); +#22336 = EDGE_CURVE('',#19674,#20855,#22337,.T.); +#22337 = ( BOUNDED_CURVE() B_SPLINE_CURVE(3,(#22338,#22339,#22340,#22341 +),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((4,4),(4.712388980385 +,6.28318530718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.804737854124,0.804737854124,1.)) REPRESENTATION_ITEM('') ); +#22338 = CARTESIAN_POINT('',(2.24,-0.9,2.55)); +#22339 = CARTESIAN_POINT('',(2.152132034356,-0.987867965644,2.55)); +#22340 = CARTESIAN_POINT('',(2.09,-1.05,2.612132034356)); +#22341 = CARTESIAN_POINT('',(2.09,-1.05,2.7)); +#22342 = ORIENTED_EDGE('',*,*,#19683,.F.); +#22343 = ORIENTED_EDGE('',*,*,#22344,.F.); +#22344 = EDGE_CURVE('',#21511,#19684,#22345,.T.); +#22345 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#22346,#22347,#22348,#22349, + #22350,#22351,#22352,#22353,#22354,#22355,#22356,#22357,#22358, + #22359,#22360,#22361,#22362,#22363,#22364,#22365,#22366,#22367), + .UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,4),(0.,4.99171192254E-05, + 9.993732101126E-05,1.480030705932E-04,1.893609445722E-04, + 2.28234138211E-04,2.70993992285E-04,3.178689716183E-04), + .UNSPECIFIED.); +#22346 = CARTESIAN_POINT('',(2.09,-1.2,2.7)); +#22347 = CARTESIAN_POINT('',(2.09,-1.2,2.683360960258)); +#22348 = CARTESIAN_POINT('',(2.092846548199,-1.200072614227, + 2.66649436435)); +#22349 = CARTESIAN_POINT('',(2.098305552793,-1.199769882796, + 2.650779235778)); +#22350 = CARTESIAN_POINT('',(2.103770410972,-1.199466826753, + 2.635047256174)); +#22351 = CARTESIAN_POINT('',(2.112041957459,-1.198740752484, + 2.620005523981)); +#22352 = CARTESIAN_POINT('',(2.12226861295,-1.196488008445, + 2.607052054874)); +#22353 = CARTESIAN_POINT('',(2.132074742763,-1.194327898476, + 2.594631239514)); +#22354 = CARTESIAN_POINT('',(2.144042216569,-1.190593429435, + 2.583764688974)); +#22355 = CARTESIAN_POINT('',(2.156310647248,-1.184547010601, + 2.575516698967)); +#22356 = CARTESIAN_POINT('',(2.166909695111,-1.179323336579, + 2.568391024696)); +#22357 = CARTESIAN_POINT('',(2.177996953936,-1.17220128737, + 2.562994335274)); +#22358 = CARTESIAN_POINT('',(2.188054120803,-1.163513829085, + 2.559281750883)); +#22359 = CARTESIAN_POINT('',(2.197540880834,-1.155319092623, + 2.555779731112)); +#22360 = CARTESIAN_POINT('',(2.206347159757,-1.145556519211, + 2.553634385325)); +#22361 = CARTESIAN_POINT('',(2.213675208525,-1.134878989134, + 2.552328048182)); +#22362 = CARTESIAN_POINT('',(2.221733194097,-1.123137885051, + 2.550891588602)); +#22363 = CARTESIAN_POINT('',(2.228209675407,-1.110024048056, + 2.550398377223)); +#22364 = CARTESIAN_POINT('',(2.232637986607,-1.096415566104, + 2.550180773067)); +#22365 = CARTESIAN_POINT('',(2.237484875668,-1.081520767764, + 2.549942600284)); +#22366 = CARTESIAN_POINT('',(2.24,-1.065665378305,2.55)); +#22367 = CARTESIAN_POINT('',(2.24,-1.05,2.55)); +#22368 = ORIENTED_EDGE('',*,*,#22182,.T.); +#22369 = CYLINDRICAL_SURFACE('',#22370,0.15); +#22370 = AXIS2_PLACEMENT_3D('',#22371,#22372,#22373); +#22371 = CARTESIAN_POINT('',(2.24,-1.2,2.7)); +#22372 = DIRECTION('',(0.,-1.,0.)); +#22373 = DIRECTION('',(0.,0.,-1.)); +#22374 = ADVANCED_FACE('',(#22375),#22381,.F.); +#22375 = FACE_BOUND('',#22376,.F.); +#22376 = EDGE_LOOP('',(#22377,#22378,#22379,#22380)); +#22377 = ORIENTED_EDGE('',*,*,#22167,.T.); +#22378 = ORIENTED_EDGE('',*,*,#20870,.T.); +#22379 = ORIENTED_EDGE('',*,*,#22138,.T.); +#22380 = ORIENTED_EDGE('',*,*,#21493,.T.); +#22381 = CYLINDRICAL_SURFACE('',#22382,0.15); +#22382 = AXIS2_PLACEMENT_3D('',#22383,#22384,#22385); +#22383 = CARTESIAN_POINT('',(2.24,-1.2,0.732300462574)); +#22384 = DIRECTION('',(0.,-1.,0.)); +#22385 = DIRECTION('',(0.,0.,-1.)); +#22386 = ADVANCED_FACE('',(#22387),#22393,.T.); +#22387 = FACE_BOUND('',#22388,.T.); +#22388 = EDGE_LOOP('',(#22389,#22390,#22391,#22392)); +#22389 = ORIENTED_EDGE('',*,*,#21476,.F.); +#22390 = ORIENTED_EDGE('',*,*,#22116,.F.); +#22391 = ORIENTED_EDGE('',*,*,#20887,.F.); +#22392 = ORIENTED_EDGE('',*,*,#22145,.F.); +#22393 = CYLINDRICAL_SURFACE('',#22394,0.15); +#22394 = AXIS2_PLACEMENT_3D('',#22395,#22396,#22397); +#22395 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.419360286527)); +#22396 = DIRECTION('',(0.,1.,0.)); +#22397 = DIRECTION('',(0.,-0.,1.)); +#22398 = ADVANCED_FACE('',(#22399),#22405,.T.); +#22399 = FACE_BOUND('',#22400,.T.); +#22400 = EDGE_LOOP('',(#22401,#22402,#22403,#22404)); +#22401 = ORIENTED_EDGE('',*,*,#21459,.F.); +#22402 = ORIENTED_EDGE('',*,*,#22094,.F.); +#22403 = ORIENTED_EDGE('',*,*,#20904,.F.); +#22404 = ORIENTED_EDGE('',*,*,#22123,.F.); +#22405 = CYLINDRICAL_SURFACE('',#22406,0.15); +#22406 = AXIS2_PLACEMENT_3D('',#22407,#22408,#22409); +#22407 = CARTESIAN_POINT('',(2.151888146546,-1.2,0.15)); +#22408 = DIRECTION('',(0.,1.,0.)); +#22409 = DIRECTION('',(0.,-0.,1.)); +#22410 = ADVANCED_FACE('',(#22411),#22417,.T.); +#22411 = FACE_BOUND('',#22412,.T.); +#22412 = EDGE_LOOP('',(#22413,#22414,#22415,#22416)); +#22413 = ORIENTED_EDGE('',*,*,#21442,.F.); +#22414 = ORIENTED_EDGE('',*,*,#22072,.F.); +#22415 = ORIENTED_EDGE('',*,*,#20921,.F.); +#22416 = ORIENTED_EDGE('',*,*,#22101,.F.); +#22417 = CYLINDRICAL_SURFACE('',#22418,0.15); +#22418 = AXIS2_PLACEMENT_3D('',#22419,#22420,#22421); +#22419 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.15)); +#22420 = DIRECTION('',(-0.,1.,0.)); +#22421 = DIRECTION('',(0.,0.,1.)); +#22422 = ADVANCED_FACE('',(#22423),#22429,.T.); +#22423 = FACE_BOUND('',#22424,.T.); +#22424 = EDGE_LOOP('',(#22425,#22426,#22427,#22428)); +#22425 = ORIENTED_EDGE('',*,*,#21425,.F.); +#22426 = ORIENTED_EDGE('',*,*,#22050,.F.); +#22427 = ORIENTED_EDGE('',*,*,#20938,.F.); +#22428 = ORIENTED_EDGE('',*,*,#22079,.F.); +#22429 = CYLINDRICAL_SURFACE('',#22430,0.15); +#22430 = AXIS2_PLACEMENT_3D('',#22431,#22432,#22433); +#22431 = CARTESIAN_POINT('',(1.651888146546,-1.2,0.421567430253)); +#22432 = DIRECTION('',(0.,1.,0.)); +#22433 = DIRECTION('',(0.,-0.,1.)); +#22434 = ADVANCED_FACE('',(#22435),#22441,.F.); +#22435 = FACE_BOUND('',#22436,.F.); +#22436 = EDGE_LOOP('',(#22437,#22438,#22439,#22440)); +#22437 = ORIENTED_EDGE('',*,*,#22057,.T.); +#22438 = ORIENTED_EDGE('',*,*,#20955,.T.); +#22439 = ORIENTED_EDGE('',*,*,#22028,.T.); +#22440 = ORIENTED_EDGE('',*,*,#21408,.T.); +#22441 = CYLINDRICAL_SURFACE('',#22442,0.15); +#22442 = AXIS2_PLACEMENT_3D('',#22443,#22444,#22445); +#22443 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.65222187009)); +#22444 = DIRECTION('',(0.,-1.,0.)); +#22445 = DIRECTION('',(0.,0.,-1.)); +#22446 = ADVANCED_FACE('',(#22447),#22453,.F.); +#22447 = FACE_BOUND('',#22448,.F.); +#22448 = EDGE_LOOP('',(#22449,#22450,#22451,#22452)); +#22449 = ORIENTED_EDGE('',*,*,#22035,.T.); +#22450 = ORIENTED_EDGE('',*,*,#20972,.T.); +#22451 = ORIENTED_EDGE('',*,*,#22006,.T.); +#22452 = ORIENTED_EDGE('',*,*,#21391,.T.); +#22453 = CYLINDRICAL_SURFACE('',#22454,0.15); +#22454 = AXIS2_PLACEMENT_3D('',#22455,#22456,#22457); +#22455 = CARTESIAN_POINT('',(1.451888146546,-1.2,0.7)); +#22456 = DIRECTION('',(0.,-1.,0.)); +#22457 = DIRECTION('',(0.,0.,-1.)); +#22458 = ADVANCED_FACE('',(#22459),#22465,.F.); +#22459 = FACE_BOUND('',#22460,.F.); +#22460 = EDGE_LOOP('',(#22461,#22462,#22463,#22464)); +#22461 = ORIENTED_EDGE('',*,*,#22013,.T.); +#22462 = ORIENTED_EDGE('',*,*,#20989,.T.); +#22463 = ORIENTED_EDGE('',*,*,#21989,.T.); +#22464 = ORIENTED_EDGE('',*,*,#21374,.T.); +#22465 = CYLINDRICAL_SURFACE('',#22466,0.15); +#22466 = AXIS2_PLACEMENT_3D('',#22467,#22468,#22469); +#22467 = CARTESIAN_POINT('',(1.371633435948,-1.2,0.7)); +#22468 = DIRECTION('',(0.,-1.,0.)); +#22469 = DIRECTION('',(0.,0.,-1.)); +#22470 = ADVANCED_FACE('',(#22471),#22477,.F.); +#22471 = FACE_BOUND('',#22472,.F.); +#22472 = EDGE_LOOP('',(#22473,#22474,#22475,#22476)); +#22473 = ORIENTED_EDGE('',*,*,#21950,.T.); +#22474 = ORIENTED_EDGE('',*,*,#21022,.T.); +#22475 = ORIENTED_EDGE('',*,*,#21928,.T.); +#22476 = ORIENTED_EDGE('',*,*,#21341,.T.); +#22477 = CYLINDRICAL_SURFACE('',#22478,0.15); +#22478 = AXIS2_PLACEMENT_3D('',#22479,#22480,#22481); +#22479 = CARTESIAN_POINT('',(-1.371633435948,-1.2,0.7)); +#22480 = DIRECTION('',(0.,-1.,0.)); +#22481 = DIRECTION('',(0.,0.,-1.)); +#22482 = ADVANCED_FACE('',(#22483),#22489,.F.); +#22483 = FACE_BOUND('',#22484,.F.); +#22484 = EDGE_LOOP('',(#22485,#22486,#22487,#22488)); +#22485 = ORIENTED_EDGE('',*,*,#21935,.T.); +#22486 = ORIENTED_EDGE('',*,*,#21039,.T.); +#22487 = ORIENTED_EDGE('',*,*,#21906,.T.); +#22488 = ORIENTED_EDGE('',*,*,#21324,.T.); +#22489 = CYLINDRICAL_SURFACE('',#22490,0.15); +#22490 = AXIS2_PLACEMENT_3D('',#22491,#22492,#22493); +#22491 = CARTESIAN_POINT('',(-1.451888146546,-1.2,0.7)); +#22492 = DIRECTION('',(0.,-1.,0.)); +#22493 = DIRECTION('',(0.,0.,-1.)); +#22494 = ADVANCED_FACE('',(#22495),#22501,.F.); +#22495 = FACE_BOUND('',#22496,.F.); +#22496 = EDGE_LOOP('',(#22497,#22498,#22499,#22500)); +#22497 = ORIENTED_EDGE('',*,*,#21913,.T.); +#22498 = ORIENTED_EDGE('',*,*,#21056,.T.); +#22499 = ORIENTED_EDGE('',*,*,#21884,.T.); +#22500 = ORIENTED_EDGE('',*,*,#21307,.T.); +#22501 = CYLINDRICAL_SURFACE('',#22502,0.15); +#22502 = AXIS2_PLACEMENT_3D('',#22503,#22504,#22505); +#22503 = CARTESIAN_POINT('',(-1.451888146546,-1.2,0.654782546749)); +#22504 = DIRECTION('',(0.,-1.,0.)); +#22505 = DIRECTION('',(0.,0.,-1.)); +#22506 = ADVANCED_FACE('',(#22507),#22513,.T.); +#22507 = FACE_BOUND('',#22508,.T.); +#22508 = EDGE_LOOP('',(#22509,#22510,#22511,#22512)); +#22509 = ORIENTED_EDGE('',*,*,#21290,.F.); +#22510 = ORIENTED_EDGE('',*,*,#21862,.F.); +#22511 = ORIENTED_EDGE('',*,*,#21073,.F.); +#22512 = ORIENTED_EDGE('',*,*,#21891,.F.); +#22513 = CYLINDRICAL_SURFACE('',#22514,0.15); +#22514 = AXIS2_PLACEMENT_3D('',#22515,#22516,#22517); +#22515 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.422093037719)); +#22516 = DIRECTION('',(0.,1.,0.)); +#22517 = DIRECTION('',(0.,-0.,1.)); +#22518 = ADVANCED_FACE('',(#22519),#22525,.T.); +#22519 = FACE_BOUND('',#22520,.T.); +#22520 = EDGE_LOOP('',(#22521,#22522,#22523,#22524)); +#22521 = ORIENTED_EDGE('',*,*,#21273,.F.); +#22522 = ORIENTED_EDGE('',*,*,#21840,.F.); +#22523 = ORIENTED_EDGE('',*,*,#21090,.F.); +#22524 = ORIENTED_EDGE('',*,*,#21869,.F.); +#22525 = CYLINDRICAL_SURFACE('',#22526,0.15); +#22526 = AXIS2_PLACEMENT_3D('',#22527,#22528,#22529); +#22527 = CARTESIAN_POINT('',(-1.648111853454,-1.2,0.15)); +#22528 = DIRECTION('',(0.,1.,0.)); +#22529 = DIRECTION('',(0.,-0.,1.)); +#22530 = ADVANCED_FACE('',(#22531),#22537,.T.); +#22531 = FACE_BOUND('',#22532,.T.); +#22532 = EDGE_LOOP('',(#22533,#22534,#22535,#22536)); +#22533 = ORIENTED_EDGE('',*,*,#21256,.F.); +#22534 = ORIENTED_EDGE('',*,*,#21818,.F.); +#22535 = ORIENTED_EDGE('',*,*,#21107,.F.); +#22536 = ORIENTED_EDGE('',*,*,#21847,.F.); +#22537 = CYLINDRICAL_SURFACE('',#22538,0.15); +#22538 = AXIS2_PLACEMENT_3D('',#22539,#22540,#22541); +#22539 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.15)); +#22540 = DIRECTION('',(0.,1.,-0.)); +#22541 = DIRECTION('',(0.,0.,1.)); +#22542 = ADVANCED_FACE('',(#22543),#22549,.T.); +#22543 = FACE_BOUND('',#22544,.T.); +#22544 = EDGE_LOOP('',(#22545,#22546,#22547,#22548)); +#22545 = ORIENTED_EDGE('',*,*,#21239,.F.); +#22546 = ORIENTED_EDGE('',*,*,#21796,.F.); +#22547 = ORIENTED_EDGE('',*,*,#21124,.F.); +#22548 = ORIENTED_EDGE('',*,*,#21825,.F.); +#22549 = CYLINDRICAL_SURFACE('',#22550,0.15); +#22550 = AXIS2_PLACEMENT_3D('',#22551,#22552,#22553); +#22551 = CARTESIAN_POINT('',(-2.148111853454,-1.2,0.42975611219)); +#22552 = DIRECTION('',(-0.,1.,0.)); +#22553 = DIRECTION('',(0.,0.,1.)); +#22554 = ADVANCED_FACE('',(#22555),#22561,.F.); +#22555 = FACE_BOUND('',#22556,.F.); +#22556 = EDGE_LOOP('',(#22557,#22558,#22559,#22560)); +#22557 = ORIENTED_EDGE('',*,*,#21803,.T.); +#22558 = ORIENTED_EDGE('',*,*,#21141,.T.); +#22559 = ORIENTED_EDGE('',*,*,#21781,.T.); +#22560 = ORIENTED_EDGE('',*,*,#21222,.T.); +#22561 = CYLINDRICAL_SURFACE('',#22562,0.15); +#22562 = AXIS2_PLACEMENT_3D('',#22563,#22564,#22565); +#22563 = CARTESIAN_POINT('',(-2.24,-1.2,0.762132034356)); +#22564 = DIRECTION('',(0.,-1.,0.)); +#22565 = DIRECTION('',(0.,0.,-1.)); +#22566 = ADVANCED_FACE('',(#22567),#22592,.T.); +#22567 = FACE_BOUND('',#22568,.T.); +#22568 = EDGE_LOOP('',(#22569,#22579,#22585,#22586)); +#22569 = ORIENTED_EDGE('',*,*,#22570,.T.); +#22570 = EDGE_CURVE('',#22571,#22573,#22575,.T.); +#22571 = VERTEX_POINT('',#22572); +#22572 = CARTESIAN_POINT('',(-2.09,-0.5,0.95)); +#22573 = VERTEX_POINT('',#22574); +#22574 = CARTESIAN_POINT('',(-2.09,-0.9,0.95)); +#22575 = LINE('',#22576,#22577); +#22576 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#22577 = VECTOR('',#22578,1.); +#22578 = DIRECTION('',(0.,-1.,0.)); +#22579 = ORIENTED_EDGE('',*,*,#22580,.T.); +#22580 = EDGE_CURVE('',#22573,#21592,#22581,.T.); +#22581 = LINE('',#22582,#22583); +#22582 = CARTESIAN_POINT('',(-2.24,-0.9,0.95)); +#22583 = VECTOR('',#22584,1.); +#22584 = DIRECTION('',(-1.,0.,0.)); +#22585 = ORIENTED_EDGE('',*,*,#21589,.F.); +#22586 = ORIENTED_EDGE('',*,*,#22587,.T.); +#22587 = EDGE_CURVE('',#21590,#22571,#22588,.T.); +#22588 = LINE('',#22589,#22590); +#22589 = CARTESIAN_POINT('',(-2.09,-0.5,0.95)); +#22590 = VECTOR('',#22591,1.); +#22591 = DIRECTION('',(1.,-0.,-0.)); +#22592 = PLANE('',#22593); +#22593 = AXIS2_PLACEMENT_3D('',#22594,#22595,#22596); +#22594 = CARTESIAN_POINT('',(-2.09,-0.35,0.95)); +#22595 = DIRECTION('',(-0.,0.,-1.)); +#22596 = DIRECTION('',(-1.,0.,0.)); +#22597 = ADVANCED_FACE('',(#22598),#22623,.T.); +#22598 = FACE_BOUND('',#22599,.T.); +#22599 = EDGE_LOOP('',(#22600,#22601,#22609,#22617)); +#22600 = ORIENTED_EDGE('',*,*,#21750,.F.); +#22601 = ORIENTED_EDGE('',*,*,#22602,.T.); +#22602 = EDGE_CURVE('',#21742,#22603,#22605,.T.); +#22603 = VERTEX_POINT('',#22604); +#22604 = CARTESIAN_POINT('',(-2.09,-0.35,-0.15)); +#22605 = LINE('',#22606,#22607); +#22606 = CARTESIAN_POINT('',(-2.09,-0.35,-0.15)); +#22607 = VECTOR('',#22608,1.); +#22608 = DIRECTION('',(1.,-0.,-0.)); +#22609 = ORIENTED_EDGE('',*,*,#22610,.T.); +#22610 = EDGE_CURVE('',#22603,#22611,#22613,.T.); +#22611 = VERTEX_POINT('',#22612); +#22612 = CARTESIAN_POINT('',(-2.09,-0.35,0.8)); +#22613 = LINE('',#22614,#22615); +#22614 = CARTESIAN_POINT('',(-2.09,-0.35,-0.45)); +#22615 = VECTOR('',#22616,1.); +#22616 = DIRECTION('',(0.,-1.161645184806E-16,1.)); +#22617 = ORIENTED_EDGE('',*,*,#22618,.T.); +#22618 = EDGE_CURVE('',#22611,#21751,#22619,.T.); +#22619 = LINE('',#22620,#22621); +#22620 = CARTESIAN_POINT('',(-2.24,-0.35,0.8)); +#22621 = VECTOR('',#22622,1.); +#22622 = DIRECTION('',(-1.,0.,0.)); +#22623 = PLANE('',#22624); +#22624 = AXIS2_PLACEMENT_3D('',#22625,#22626,#22627); +#22625 = CARTESIAN_POINT('',(-2.09,-0.35,-0.45)); +#22626 = DIRECTION('',(0.,-1.,-1.161645184806E-16)); +#22627 = DIRECTION('',(0.,1.161645184806E-16,-1.)); +#22628 = ADVANCED_FACE('',(#22629),#22654,.T.); +#22629 = FACE_BOUND('',#22630,.T.); +#22630 = EDGE_LOOP('',(#22631,#22641,#22647,#22648)); +#22631 = ORIENTED_EDGE('',*,*,#22632,.T.); +#22632 = EDGE_CURVE('',#22633,#22635,#22637,.T.); +#22633 = VERTEX_POINT('',#22634); +#22634 = CARTESIAN_POINT('',(-2.09,5.E-02,-0.45)); +#22635 = VERTEX_POINT('',#22636); +#22636 = CARTESIAN_POINT('',(-2.09,-5.E-02,-0.45)); +#22637 = LINE('',#22638,#22639); +#22638 = CARTESIAN_POINT('',(-2.09,0.35,-0.45)); +#22639 = VECTOR('',#22640,1.); +#22640 = DIRECTION('',(0.,-1.,0.)); +#22641 = ORIENTED_EDGE('',*,*,#22642,.T.); +#22642 = EDGE_CURVE('',#22635,#21734,#22643,.T.); +#22643 = LINE('',#22644,#22645); +#22644 = CARTESIAN_POINT('',(-2.09,-5.E-02,-0.45)); +#22645 = VECTOR('',#22646,1.); +#22646 = DIRECTION('',(-1.,0.,0.)); +#22647 = ORIENTED_EDGE('',*,*,#21733,.F.); +#22648 = ORIENTED_EDGE('',*,*,#22649,.T.); +#22649 = EDGE_CURVE('',#21725,#22633,#22650,.T.); +#22650 = LINE('',#22651,#22652); +#22651 = CARTESIAN_POINT('',(-2.09,5.E-02,-0.45)); +#22652 = VECTOR('',#22653,1.); +#22653 = DIRECTION('',(1.,-0.,-0.)); +#22654 = PLANE('',#22655); +#22655 = AXIS2_PLACEMENT_3D('',#22656,#22657,#22658); +#22656 = CARTESIAN_POINT('',(-2.09,0.35,-0.45)); +#22657 = DIRECTION('',(-0.,0.,-1.)); +#22658 = DIRECTION('',(-1.,0.,0.)); +#22659 = ADVANCED_FACE('',(#22660),#22685,.T.); +#22660 = FACE_BOUND('',#22661,.T.); +#22661 = EDGE_LOOP('',(#22662,#22672,#22678,#22679)); +#22662 = ORIENTED_EDGE('',*,*,#22663,.T.); +#22663 = EDGE_CURVE('',#22664,#22666,#22668,.T.); +#22664 = VERTEX_POINT('',#22665); +#22665 = CARTESIAN_POINT('',(-2.09,0.35,1.1)); +#22666 = VERTEX_POINT('',#22667); +#22667 = CARTESIAN_POINT('',(-2.09,0.35,-0.15)); +#22668 = LINE('',#22669,#22670); +#22669 = CARTESIAN_POINT('',(-2.09,0.35,1.25)); +#22670 = VECTOR('',#22671,1.); +#22671 = DIRECTION('',(0.,-1.27553196763E-16,-1.)); +#22672 = ORIENTED_EDGE('',*,*,#22673,.T.); +#22673 = EDGE_CURVE('',#22666,#21717,#22674,.T.); +#22674 = LINE('',#22675,#22676); +#22675 = CARTESIAN_POINT('',(-2.09,0.35,-0.15)); +#22676 = VECTOR('',#22677,1.); +#22677 = DIRECTION('',(-1.,0.,0.)); +#22678 = ORIENTED_EDGE('',*,*,#21716,.F.); +#22679 = ORIENTED_EDGE('',*,*,#22680,.T.); +#22680 = EDGE_CURVE('',#21708,#22664,#22681,.T.); +#22681 = LINE('',#22682,#22683); +#22682 = CARTESIAN_POINT('',(-2.09,0.35,1.1)); +#22683 = VECTOR('',#22684,1.); +#22684 = DIRECTION('',(1.,-0.,-0.)); +#22685 = PLANE('',#22686); +#22686 = AXIS2_PLACEMENT_3D('',#22687,#22688,#22689); +#22687 = CARTESIAN_POINT('',(-2.09,0.35,1.25)); +#22688 = DIRECTION('',(0.,1.,-1.27553196763E-16)); +#22689 = DIRECTION('',(0.,1.27553196763E-16,1.)); +#22690 = ADVANCED_FACE('',(#22691),#22716,.T.); +#22691 = FACE_BOUND('',#22692,.T.); +#22692 = EDGE_LOOP('',(#22693,#22694,#22702,#22710)); +#22693 = ORIENTED_EDGE('',*,*,#21699,.F.); +#22694 = ORIENTED_EDGE('',*,*,#22695,.T.); +#22695 = EDGE_CURVE('',#21691,#22696,#22698,.T.); +#22696 = VERTEX_POINT('',#22697); +#22697 = CARTESIAN_POINT('',(-2.09,0.56,1.25)); +#22698 = LINE('',#22699,#22700); +#22699 = CARTESIAN_POINT('',(-2.09,0.56,1.25)); +#22700 = VECTOR('',#22701,1.); +#22701 = DIRECTION('',(1.,-0.,-0.)); +#22702 = ORIENTED_EDGE('',*,*,#22703,.T.); +#22703 = EDGE_CURVE('',#22696,#22704,#22706,.T.); +#22704 = VERTEX_POINT('',#22705); +#22705 = CARTESIAN_POINT('',(-2.09,0.5,1.25)); +#22706 = LINE('',#22707,#22708); +#22707 = CARTESIAN_POINT('',(-2.09,0.71,1.25)); +#22708 = VECTOR('',#22709,1.); +#22709 = DIRECTION('',(0.,-1.,0.)); +#22710 = ORIENTED_EDGE('',*,*,#22711,.T.); +#22711 = EDGE_CURVE('',#22704,#21700,#22712,.T.); +#22712 = LINE('',#22713,#22714); +#22713 = CARTESIAN_POINT('',(-2.24,0.5,1.25)); +#22714 = VECTOR('',#22715,1.); +#22715 = DIRECTION('',(-1.,0.,0.)); +#22716 = PLANE('',#22717); +#22717 = AXIS2_PLACEMENT_3D('',#22718,#22719,#22720); +#22718 = CARTESIAN_POINT('',(-2.09,0.71,1.25)); +#22719 = DIRECTION('',(-0.,0.,-1.)); +#22720 = DIRECTION('',(-1.,0.,0.)); +#22721 = ADVANCED_FACE('',(#22722),#22758,.T.); +#22722 = FACE_BOUND('',#22723,.T.); +#22723 = EDGE_LOOP('',(#22724,#22735,#22743,#22752)); +#22724 = ORIENTED_EDGE('',*,*,#22725,.F.); +#22725 = EDGE_CURVE('',#22726,#22728,#22730,.T.); +#22726 = VERTEX_POINT('',#22727); +#22727 = CARTESIAN_POINT('',(-2.089554180487,0.71,1.1)); +#22728 = VERTEX_POINT('',#22729); +#22729 = CARTESIAN_POINT('',(-2.079574561329,0.71,1.074090292695)); +#22730 = CIRCLE('',#22731,5.764753397594E-02); +#22731 = AXIS2_PLACEMENT_3D('',#22732,#22733,#22734); +#22732 = CARTESIAN_POINT('',(-2.032352466024,0.71,1.107155559798)); +#22733 = DIRECTION('',(-0.,-1.,-0.)); +#22734 = DIRECTION('',(-1.,0.,0.)); +#22735 = ORIENTED_EDGE('',*,*,#22736,.T.); +#22736 = EDGE_CURVE('',#22726,#22737,#22739,.T.); +#22737 = VERTEX_POINT('',#22738); +#22738 = CARTESIAN_POINT('',(-2.239876672637,0.71,1.1)); +#22739 = LINE('',#22740,#22741); +#22740 = CARTESIAN_POINT('',(-2.24,0.71,1.1)); +#22741 = VECTOR('',#22742,1.); +#22742 = DIRECTION('',(-1.,0.,0.)); +#22743 = ORIENTED_EDGE('',*,*,#22744,.T.); +#22744 = EDGE_CURVE('',#22737,#22745,#22747,.T.); +#22745 = VERTEX_POINT('',#22746); +#22746 = CARTESIAN_POINT('',(-2.202447367972,0.71,0.988053827243)); +#22747 = CIRCLE('',#22748,0.207647533976); +#22748 = AXIS2_PLACEMENT_3D('',#22749,#22750,#22751); +#22749 = CARTESIAN_POINT('',(-2.032352466024,0.71,1.107155559798)); +#22750 = DIRECTION('',(-0.,-1.,-0.)); +#22751 = DIRECTION('',(-1.,0.,0.)); +#22752 = ORIENTED_EDGE('',*,*,#22753,.F.); +#22753 = EDGE_CURVE('',#22728,#22745,#22754,.T.); +#22754 = LINE('',#22755,#22756); +#22755 = CARTESIAN_POINT('',(-2.079574561329,0.71,1.074090292695)); +#22756 = VECTOR('',#22757,1.); +#22757 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#22758 = PLANE('',#22759); +#22759 = AXIS2_PLACEMENT_3D('',#22760,#22761,#22762); +#22760 = CARTESIAN_POINT('',(-2.09,0.71,1.107155559798)); +#22761 = DIRECTION('',(0.,-1.,0.)); +#22762 = DIRECTION('',(0.,-0.,-1.)); +#22763 = ADVANCED_FACE('',(#22764),#22825,.T.); +#22764 = FACE_BOUND('',#22765,.T.); +#22765 = EDGE_LOOP('',(#22766,#22767,#22776,#22784,#22793,#22801,#22810, + #22818)); +#22766 = ORIENTED_EDGE('',*,*,#21674,.F.); +#22767 = ORIENTED_EDGE('',*,*,#22768,.T.); +#22768 = EDGE_CURVE('',#21667,#22769,#22771,.T.); +#22769 = VERTEX_POINT('',#22770); +#22770 = CARTESIAN_POINT('',(-2.202447367972,1.31,2.511946172757)); +#22771 = CIRCLE('',#22772,0.207647533976); +#22772 = AXIS2_PLACEMENT_3D('',#22773,#22774,#22775); +#22773 = CARTESIAN_POINT('',(-2.032352466024,1.31,2.392844440202)); +#22774 = DIRECTION('',(0.,1.,0.)); +#22775 = DIRECTION('',(-1.,0.,0.)); +#22776 = ORIENTED_EDGE('',*,*,#22777,.F.); +#22777 = EDGE_CURVE('',#22778,#22769,#22780,.T.); +#22778 = VERTEX_POINT('',#22779); +#22779 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#22780 = LINE('',#22781,#22782); +#22781 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#22782 = VECTOR('',#22783,1.); +#22783 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#22784 = ORIENTED_EDGE('',*,*,#22785,.F.); +#22785 = EDGE_CURVE('',#22786,#22778,#22788,.T.); +#22786 = VERTEX_POINT('',#22787); +#22787 = CARTESIAN_POINT('',(-2.09,1.31,2.392844440202)); +#22788 = CIRCLE('',#22789,5.764753397594E-02); +#22789 = AXIS2_PLACEMENT_3D('',#22790,#22791,#22792); +#22790 = CARTESIAN_POINT('',(-2.032352466024,1.31,2.392844440202)); +#22791 = DIRECTION('',(0.,1.,0.)); +#22792 = DIRECTION('',(-1.,0.,0.)); +#22793 = ORIENTED_EDGE('',*,*,#22794,.T.); +#22794 = EDGE_CURVE('',#22786,#22795,#22797,.T.); +#22795 = VERTEX_POINT('',#22796); +#22796 = CARTESIAN_POINT('',(-2.09,1.31,1.107155559798)); +#22797 = LINE('',#22798,#22799); +#22798 = CARTESIAN_POINT('',(-2.09,1.31,2.392844440202)); +#22799 = VECTOR('',#22800,1.); +#22800 = DIRECTION('',(0.,-1.686570038849E-16,-1.)); +#22801 = ORIENTED_EDGE('',*,*,#22802,.T.); +#22802 = EDGE_CURVE('',#22795,#22803,#22805,.T.); +#22803 = VERTEX_POINT('',#22804); +#22804 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#22805 = CIRCLE('',#22806,5.764753397594E-02); +#22806 = AXIS2_PLACEMENT_3D('',#22807,#22808,#22809); +#22807 = CARTESIAN_POINT('',(-2.032352466024,1.31,1.107155559798)); +#22808 = DIRECTION('',(-0.,-1.,-0.)); +#22809 = DIRECTION('',(-1.,0.,0.)); +#22810 = ORIENTED_EDGE('',*,*,#22811,.F.); +#22811 = EDGE_CURVE('',#22812,#22803,#22814,.T.); +#22812 = VERTEX_POINT('',#22813); +#22813 = CARTESIAN_POINT('',(-2.202447367972,1.31,0.988053827243)); +#22814 = LINE('',#22815,#22816); +#22815 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#22816 = VECTOR('',#22817,1.); +#22817 = DIRECTION('',(0.819152044289,-0.,0.573576436351)); +#22818 = ORIENTED_EDGE('',*,*,#22819,.F.); +#22819 = EDGE_CURVE('',#21675,#22812,#22820,.T.); +#22820 = CIRCLE('',#22821,0.207647533976); +#22821 = AXIS2_PLACEMENT_3D('',#22822,#22823,#22824); +#22822 = CARTESIAN_POINT('',(-2.032352466024,1.31,1.107155559798)); +#22823 = DIRECTION('',(-0.,-1.,-0.)); +#22824 = DIRECTION('',(-1.,0.,0.)); +#22825 = PLANE('',#22826); +#22826 = AXIS2_PLACEMENT_3D('',#22827,#22828,#22829); +#22827 = CARTESIAN_POINT('',(-2.09,1.31,2.392844440202)); +#22828 = DIRECTION('',(0.,1.,-1.686570038849E-16)); +#22829 = DIRECTION('',(0.,1.686570038849E-16,1.)); +#22830 = ADVANCED_FACE('',(#22831),#22867,.T.); +#22831 = FACE_BOUND('',#22832,.T.); +#22832 = EDGE_LOOP('',(#22833,#22844,#22852,#22861)); +#22833 = ORIENTED_EDGE('',*,*,#22834,.F.); +#22834 = EDGE_CURVE('',#22835,#22837,#22839,.T.); +#22835 = VERTEX_POINT('',#22836); +#22836 = CARTESIAN_POINT('',(-2.239876672637,0.71,2.4)); +#22837 = VERTEX_POINT('',#22838); +#22838 = CARTESIAN_POINT('',(-2.202447367972,0.71,2.511946172757)); +#22839 = CIRCLE('',#22840,0.207647533976); +#22840 = AXIS2_PLACEMENT_3D('',#22841,#22842,#22843); +#22841 = CARTESIAN_POINT('',(-2.032352466024,0.71,2.392844440202)); +#22842 = DIRECTION('',(0.,1.,0.)); +#22843 = DIRECTION('',(-1.,0.,0.)); +#22844 = ORIENTED_EDGE('',*,*,#22845,.T.); +#22845 = EDGE_CURVE('',#22835,#22846,#22848,.T.); +#22846 = VERTEX_POINT('',#22847); +#22847 = CARTESIAN_POINT('',(-2.089554180487,0.71,2.4)); +#22848 = LINE('',#22849,#22850); +#22849 = CARTESIAN_POINT('',(-2.09,0.71,2.4)); +#22850 = VECTOR('',#22851,1.); +#22851 = DIRECTION('',(1.,-0.,-0.)); +#22852 = ORIENTED_EDGE('',*,*,#22853,.T.); +#22853 = EDGE_CURVE('',#22846,#22854,#22856,.T.); +#22854 = VERTEX_POINT('',#22855); +#22855 = CARTESIAN_POINT('',(-2.079574561329,0.71,2.425909707305)); +#22856 = CIRCLE('',#22857,5.764753397594E-02); +#22857 = AXIS2_PLACEMENT_3D('',#22858,#22859,#22860); +#22858 = CARTESIAN_POINT('',(-2.032352466024,0.71,2.392844440202)); +#22859 = DIRECTION('',(0.,1.,0.)); +#22860 = DIRECTION('',(-1.,0.,0.)); +#22861 = ORIENTED_EDGE('',*,*,#22862,.F.); +#22862 = EDGE_CURVE('',#22837,#22854,#22863,.T.); +#22863 = LINE('',#22864,#22865); +#22864 = CARTESIAN_POINT('',(-2.079574561329,0.71,2.425909707305)); +#22865 = VECTOR('',#22866,1.); +#22866 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#22867 = PLANE('',#22868); +#22868 = AXIS2_PLACEMENT_3D('',#22869,#22870,#22871); +#22869 = CARTESIAN_POINT('',(-2.09,0.71,2.25)); +#22870 = DIRECTION('',(0.,-1.,0.)); +#22871 = DIRECTION('',(0.,-0.,-1.)); +#22872 = ADVANCED_FACE('',(#22873),#22898,.T.); +#22873 = FACE_BOUND('',#22874,.T.); +#22874 = EDGE_LOOP('',(#22875,#22885,#22891,#22892)); +#22875 = ORIENTED_EDGE('',*,*,#22876,.T.); +#22876 = EDGE_CURVE('',#22877,#22879,#22881,.T.); +#22877 = VERTEX_POINT('',#22878); +#22878 = CARTESIAN_POINT('',(-2.09,0.5,2.25)); +#22879 = VERTEX_POINT('',#22880); +#22880 = CARTESIAN_POINT('',(-2.09,0.56,2.25)); +#22881 = LINE('',#22882,#22883); +#22882 = CARTESIAN_POINT('',(-2.09,0.35,2.25)); +#22883 = VECTOR('',#22884,1.); +#22884 = DIRECTION('',(0.,1.,0.)); +#22885 = ORIENTED_EDGE('',*,*,#22886,.T.); +#22886 = EDGE_CURVE('',#22879,#21650,#22887,.T.); +#22887 = LINE('',#22888,#22889); +#22888 = CARTESIAN_POINT('',(-2.24,0.56,2.25)); +#22889 = VECTOR('',#22890,1.); +#22890 = DIRECTION('',(-1.,0.,0.)); +#22891 = ORIENTED_EDGE('',*,*,#21649,.F.); +#22892 = ORIENTED_EDGE('',*,*,#22893,.T.); +#22893 = EDGE_CURVE('',#21641,#22877,#22894,.T.); +#22894 = LINE('',#22895,#22896); +#22895 = CARTESIAN_POINT('',(-2.09,0.5,2.25)); +#22896 = VECTOR('',#22897,1.); +#22897 = DIRECTION('',(1.,-0.,-0.)); +#22898 = PLANE('',#22899); +#22899 = AXIS2_PLACEMENT_3D('',#22900,#22901,#22902); +#22900 = CARTESIAN_POINT('',(-2.09,0.35,2.25)); +#22901 = DIRECTION('',(0.,-0.,1.)); +#22902 = DIRECTION('',(1.,0.,0.)); +#22903 = ADVANCED_FACE('',(#22904),#22929,.T.); +#22904 = FACE_BOUND('',#22905,.T.); +#22905 = EDGE_LOOP('',(#22906,#22907,#22915,#22923)); +#22906 = ORIENTED_EDGE('',*,*,#21623,.F.); +#22907 = ORIENTED_EDGE('',*,*,#22908,.T.); +#22908 = EDGE_CURVE('',#21616,#22909,#22911,.T.); +#22909 = VERTEX_POINT('',#22910); +#22910 = CARTESIAN_POINT('',(-2.09,-0.9,2.55)); +#22911 = LINE('',#22912,#22913); +#22912 = CARTESIAN_POINT('',(-2.09,-0.9,2.55)); +#22913 = VECTOR('',#22914,1.); +#22914 = DIRECTION('',(1.,-0.,-0.)); +#22915 = ORIENTED_EDGE('',*,*,#22916,.T.); +#22916 = EDGE_CURVE('',#22909,#22917,#22919,.T.); +#22917 = VERTEX_POINT('',#22918); +#22918 = CARTESIAN_POINT('',(-2.09,0.2,2.55)); +#22919 = LINE('',#22920,#22921); +#22920 = CARTESIAN_POINT('',(-2.09,-1.05,2.55)); +#22921 = VECTOR('',#22922,1.); +#22922 = DIRECTION('',(0.,1.,0.)); +#22923 = ORIENTED_EDGE('',*,*,#22924,.T.); +#22924 = EDGE_CURVE('',#22917,#21624,#22925,.T.); +#22925 = LINE('',#22926,#22927); +#22926 = CARTESIAN_POINT('',(-2.09,0.2,2.55)); +#22927 = VECTOR('',#22928,1.); +#22928 = DIRECTION('',(-1.,0.,0.)); +#22929 = PLANE('',#22930); +#22930 = AXIS2_PLACEMENT_3D('',#22931,#22932,#22933); +#22931 = CARTESIAN_POINT('',(-2.09,-1.05,2.55)); +#22932 = DIRECTION('',(0.,-0.,1.)); +#22933 = DIRECTION('',(1.,0.,0.)); +#22934 = ADVANCED_FACE('',(#22935),#23034,.F.); +#22935 = FACE_BOUND('',#22936,.T.); +#22936 = EDGE_LOOP('',(#22937,#22938,#22945,#22946,#22953,#22954,#22961, + #22962,#22971,#22977,#22978,#22986,#22993,#22994,#23003,#23010, + #23011,#23018,#23019,#23026,#23027)); +#22937 = ORIENTED_EDGE('',*,*,#22610,.F.); +#22938 = ORIENTED_EDGE('',*,*,#22939,.T.); +#22939 = EDGE_CURVE('',#22603,#22635,#22940,.T.); +#22940 = CIRCLE('',#22941,0.3); +#22941 = AXIS2_PLACEMENT_3D('',#22942,#22943,#22944); +#22942 = CARTESIAN_POINT('',(-2.09,-5.E-02,-0.15)); +#22943 = DIRECTION('',(1.,0.,-0.)); +#22944 = DIRECTION('',(0.,0.,1.)); +#22945 = ORIENTED_EDGE('',*,*,#22632,.F.); +#22946 = ORIENTED_EDGE('',*,*,#22947,.T.); +#22947 = EDGE_CURVE('',#22633,#22666,#22948,.T.); +#22948 = CIRCLE('',#22949,0.3); +#22949 = AXIS2_PLACEMENT_3D('',#22950,#22951,#22952); +#22950 = CARTESIAN_POINT('',(-2.09,5.E-02,-0.15)); +#22951 = DIRECTION('',(1.,0.,-0.)); +#22952 = DIRECTION('',(0.,0.,1.)); +#22953 = ORIENTED_EDGE('',*,*,#22663,.F.); +#22954 = ORIENTED_EDGE('',*,*,#22955,.T.); +#22955 = EDGE_CURVE('',#22664,#22704,#22956,.T.); +#22956 = CIRCLE('',#22957,0.15); +#22957 = AXIS2_PLACEMENT_3D('',#22958,#22959,#22960); +#22958 = CARTESIAN_POINT('',(-2.09,0.5,1.1)); +#22959 = DIRECTION('',(-1.,0.,0.)); +#22960 = DIRECTION('',(0.,0.,1.)); +#22961 = ORIENTED_EDGE('',*,*,#22703,.F.); +#22962 = ORIENTED_EDGE('',*,*,#22963,.T.); +#22963 = EDGE_CURVE('',#22696,#22964,#22966,.T.); +#22964 = VERTEX_POINT('',#22965); +#22965 = CARTESIAN_POINT('',(-2.09,0.709829229338,1.107155559798)); +#22966 = CIRCLE('',#22967,0.15); +#22967 = AXIS2_PLACEMENT_3D('',#22968,#22969,#22970); +#22968 = CARTESIAN_POINT('',(-2.09,0.56,1.1)); +#22969 = DIRECTION('',(-1.,0.,0.)); +#22970 = DIRECTION('',(0.,0.,1.)); +#22971 = ORIENTED_EDGE('',*,*,#22972,.F.); +#22972 = EDGE_CURVE('',#22795,#22964,#22973,.T.); +#22973 = LINE('',#22974,#22975); +#22974 = CARTESIAN_POINT('',(-2.09,1.31,1.107155559798)); +#22975 = VECTOR('',#22976,1.); +#22976 = DIRECTION('',(0.,-1.,0.)); +#22977 = ORIENTED_EDGE('',*,*,#22794,.F.); +#22978 = ORIENTED_EDGE('',*,*,#22979,.F.); +#22979 = EDGE_CURVE('',#22980,#22786,#22982,.T.); +#22980 = VERTEX_POINT('',#22981); +#22981 = CARTESIAN_POINT('',(-2.09,0.709829229338,2.392844440202)); +#22982 = LINE('',#22983,#22984); +#22983 = CARTESIAN_POINT('',(-2.09,0.71,2.392844440202)); +#22984 = VECTOR('',#22985,1.); +#22985 = DIRECTION('',(0.,1.,0.)); +#22986 = ORIENTED_EDGE('',*,*,#22987,.T.); +#22987 = EDGE_CURVE('',#22980,#22879,#22988,.T.); +#22988 = CIRCLE('',#22989,0.15); +#22989 = AXIS2_PLACEMENT_3D('',#22990,#22991,#22992); +#22990 = CARTESIAN_POINT('',(-2.09,0.56,2.4)); +#22991 = DIRECTION('',(-1.,0.,0.)); +#22992 = DIRECTION('',(0.,0.,1.)); +#22993 = ORIENTED_EDGE('',*,*,#22876,.F.); +#22994 = ORIENTED_EDGE('',*,*,#22995,.T.); +#22995 = EDGE_CURVE('',#22877,#22996,#22998,.T.); +#22996 = VERTEX_POINT('',#22997); +#22997 = CARTESIAN_POINT('',(-2.09,0.35,2.4)); +#22998 = CIRCLE('',#22999,0.15); +#22999 = AXIS2_PLACEMENT_3D('',#23000,#23001,#23002); +#23000 = CARTESIAN_POINT('',(-2.09,0.5,2.4)); +#23001 = DIRECTION('',(-1.,0.,0.)); +#23002 = DIRECTION('',(0.,0.,1.)); +#23003 = ORIENTED_EDGE('',*,*,#23004,.T.); +#23004 = EDGE_CURVE('',#22996,#22917,#23005,.T.); +#23005 = CIRCLE('',#23006,0.15); +#23006 = AXIS2_PLACEMENT_3D('',#23007,#23008,#23009); +#23007 = CARTESIAN_POINT('',(-2.09,0.2,2.4)); +#23008 = DIRECTION('',(1.,0.,-0.)); +#23009 = DIRECTION('',(0.,0.,1.)); +#23010 = ORIENTED_EDGE('',*,*,#22916,.F.); +#23011 = ORIENTED_EDGE('',*,*,#23012,.T.); +#23012 = EDGE_CURVE('',#22909,#21159,#23013,.T.); +#23013 = CIRCLE('',#23014,0.15); +#23014 = AXIS2_PLACEMENT_3D('',#23015,#23016,#23017); +#23015 = CARTESIAN_POINT('',(-2.09,-0.9,2.7)); +#23016 = DIRECTION('',(-1.,0.,0.)); +#23017 = DIRECTION('',(0.,0.,1.)); +#23018 = ORIENTED_EDGE('',*,*,#21158,.F.); +#23019 = ORIENTED_EDGE('',*,*,#23020,.T.); +#23020 = EDGE_CURVE('',#21151,#22573,#23021,.T.); +#23021 = CIRCLE('',#23022,0.15); +#23022 = AXIS2_PLACEMENT_3D('',#23023,#23024,#23025); +#23023 = CARTESIAN_POINT('',(-2.09,-0.9,0.8)); +#23024 = DIRECTION('',(-1.,0.,0.)); +#23025 = DIRECTION('',(0.,0.,1.)); +#23026 = ORIENTED_EDGE('',*,*,#22570,.F.); +#23027 = ORIENTED_EDGE('',*,*,#23028,.T.); +#23028 = EDGE_CURVE('',#22571,#22611,#23029,.T.); +#23029 = CIRCLE('',#23030,0.15); +#23030 = AXIS2_PLACEMENT_3D('',#23031,#23032,#23033); +#23031 = CARTESIAN_POINT('',(-2.09,-0.5,0.8)); +#23032 = DIRECTION('',(-1.,0.,0.)); +#23033 = DIRECTION('',(0.,0.,1.)); +#23034 = PLANE('',#23035); +#23035 = AXIS2_PLACEMENT_3D('',#23036,#23037,#23038); +#23036 = CARTESIAN_POINT('',(-2.09,0.,0.)); +#23037 = DIRECTION('',(-1.,0.,0.)); +#23038 = DIRECTION('',(0.,0.,1.)); +#23039 = ADVANCED_FACE('',(#23040),#23074,.T.); +#23040 = FACE_BOUND('',#23041,.T.); +#23041 = EDGE_LOOP('',(#23042,#23052,#23060,#23068)); +#23042 = ORIENTED_EDGE('',*,*,#23043,.T.); +#23043 = EDGE_CURVE('',#23044,#23046,#23048,.T.); +#23044 = VERTEX_POINT('',#23045); +#23045 = CARTESIAN_POINT('',(-1.925,1.31,2.936601758237)); +#23046 = VERTEX_POINT('',#23047); +#23047 = CARTESIAN_POINT('',(-1.925,1.31,3.1)); +#23048 = LINE('',#23049,#23050); +#23049 = CARTESIAN_POINT('',(-1.925,1.31,2.936601758237)); +#23050 = VECTOR('',#23051,1.); +#23051 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23052 = ORIENTED_EDGE('',*,*,#23053,.T.); +#23053 = EDGE_CURVE('',#23046,#23054,#23056,.T.); +#23054 = VERTEX_POINT('',#23055); +#23055 = CARTESIAN_POINT('',(-1.775,1.31,3.1)); +#23056 = LINE('',#23057,#23058); +#23057 = CARTESIAN_POINT('',(-1.775,1.31,3.1)); +#23058 = VECTOR('',#23059,1.); +#23059 = DIRECTION('',(1.,-0.,-0.)); +#23060 = ORIENTED_EDGE('',*,*,#23061,.F.); +#23061 = EDGE_CURVE('',#23062,#23054,#23064,.T.); +#23062 = VERTEX_POINT('',#23063); +#23063 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23064 = LINE('',#23065,#23066); +#23065 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23066 = VECTOR('',#23067,1.); +#23067 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23068 = ORIENTED_EDGE('',*,*,#23069,.T.); +#23069 = EDGE_CURVE('',#23062,#23044,#23070,.T.); +#23070 = LINE('',#23071,#23072); +#23071 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23072 = VECTOR('',#23073,1.); +#23073 = DIRECTION('',(-1.,0.,0.)); +#23074 = PLANE('',#23075); +#23075 = AXIS2_PLACEMENT_3D('',#23076,#23077,#23078); +#23076 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23077 = DIRECTION('',(0.,1.,0.)); +#23078 = DIRECTION('',(0.,-0.,1.)); +#23079 = ADVANCED_FACE('',(#23080),#23123,.T.); +#23080 = FACE_BOUND('',#23081,.T.); +#23081 = EDGE_LOOP('',(#23082,#23083,#23092,#23100,#23109,#23117)); +#23082 = ORIENTED_EDGE('',*,*,#23061,.T.); +#23083 = ORIENTED_EDGE('',*,*,#23084,.T.); +#23084 = EDGE_CURVE('',#23054,#23085,#23087,.T.); +#23085 = VERTEX_POINT('',#23086); +#23086 = CARTESIAN_POINT('',(-1.775,1.16,3.25)); +#23087 = CIRCLE('',#23088,0.15); +#23088 = AXIS2_PLACEMENT_3D('',#23089,#23090,#23091); +#23089 = CARTESIAN_POINT('',(-1.775,1.16,3.1)); +#23090 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#23091 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#23092 = ORIENTED_EDGE('',*,*,#23093,.F.); +#23093 = EDGE_CURVE('',#23094,#23085,#23096,.T.); +#23094 = VERTEX_POINT('',#23095); +#23095 = CARTESIAN_POINT('',(-1.775,0.86,3.25)); +#23096 = LINE('',#23097,#23098); +#23097 = CARTESIAN_POINT('',(-1.775,1.31,3.25)); +#23098 = VECTOR('',#23099,1.); +#23099 = DIRECTION('',(-0.,1.,0.)); +#23100 = ORIENTED_EDGE('',*,*,#23101,.T.); +#23101 = EDGE_CURVE('',#23094,#23102,#23104,.T.); +#23102 = VERTEX_POINT('',#23103); +#23103 = CARTESIAN_POINT('',(-1.775,0.71,3.1)); +#23104 = CIRCLE('',#23105,0.15); +#23105 = AXIS2_PLACEMENT_3D('',#23106,#23107,#23108); +#23106 = CARTESIAN_POINT('',(-1.775,0.86,3.1)); +#23107 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#23108 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#23109 = ORIENTED_EDGE('',*,*,#23110,.F.); +#23110 = EDGE_CURVE('',#23111,#23102,#23113,.T.); +#23111 = VERTEX_POINT('',#23112); +#23112 = CARTESIAN_POINT('',(-1.775,0.71,2.936601758237)); +#23113 = LINE('',#23114,#23115); +#23114 = CARTESIAN_POINT('',(-1.775,0.71,2.936601758237)); +#23115 = VECTOR('',#23116,1.); +#23116 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23117 = ORIENTED_EDGE('',*,*,#23118,.T.); +#23118 = EDGE_CURVE('',#23111,#23062,#23119,.T.); +#23119 = LINE('',#23120,#23121); +#23120 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23121 = VECTOR('',#23122,1.); +#23122 = DIRECTION('',(-0.,1.,0.)); +#23123 = PLANE('',#23124); +#23124 = AXIS2_PLACEMENT_3D('',#23125,#23126,#23127); +#23125 = CARTESIAN_POINT('',(-1.775,1.31,2.936601758237)); +#23126 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#23127 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#23128 = ADVANCED_FACE('',(#23129),#23154,.T.); +#23129 = FACE_BOUND('',#23130,.T.); +#23130 = EDGE_LOOP('',(#23131,#23132,#23140,#23148)); +#23131 = ORIENTED_EDGE('',*,*,#23110,.T.); +#23132 = ORIENTED_EDGE('',*,*,#23133,.T.); +#23133 = EDGE_CURVE('',#23102,#23134,#23136,.T.); +#23134 = VERTEX_POINT('',#23135); +#23135 = CARTESIAN_POINT('',(-1.925,0.71,3.1)); +#23136 = LINE('',#23137,#23138); +#23137 = CARTESIAN_POINT('',(-1.925,0.71,3.1)); +#23138 = VECTOR('',#23139,1.); +#23139 = DIRECTION('',(-1.,-0.,0.)); +#23140 = ORIENTED_EDGE('',*,*,#23141,.F.); +#23141 = EDGE_CURVE('',#23142,#23134,#23144,.T.); +#23142 = VERTEX_POINT('',#23143); +#23143 = CARTESIAN_POINT('',(-1.925,0.71,2.936601758237)); +#23144 = LINE('',#23145,#23146); +#23145 = CARTESIAN_POINT('',(-1.925,0.71,2.936601758237)); +#23146 = VECTOR('',#23147,1.); +#23147 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23148 = ORIENTED_EDGE('',*,*,#23149,.T.); +#23149 = EDGE_CURVE('',#23142,#23111,#23150,.T.); +#23150 = LINE('',#23151,#23152); +#23151 = CARTESIAN_POINT('',(-1.775,0.71,2.936601758237)); +#23152 = VECTOR('',#23153,1.); +#23153 = DIRECTION('',(1.,0.,-0.)); +#23154 = PLANE('',#23155); +#23155 = AXIS2_PLACEMENT_3D('',#23156,#23157,#23158); +#23156 = CARTESIAN_POINT('',(-1.775,0.71,2.936601758237)); +#23157 = DIRECTION('',(0.,-1.,0.)); +#23158 = DIRECTION('',(0.,-0.,-1.)); +#23159 = ADVANCED_FACE('',(#23160),#23194,.T.); +#23160 = FACE_BOUND('',#23161,.T.); +#23161 = EDGE_LOOP('',(#23162,#23172,#23179,#23180,#23186,#23187)); +#23162 = ORIENTED_EDGE('',*,*,#23163,.F.); +#23163 = EDGE_CURVE('',#23164,#23166,#23168,.T.); +#23164 = VERTEX_POINT('',#23165); +#23165 = CARTESIAN_POINT('',(-1.925,1.16,3.25)); +#23166 = VERTEX_POINT('',#23167); +#23167 = CARTESIAN_POINT('',(-1.925,0.86,3.25)); +#23168 = LINE('',#23169,#23170); +#23169 = CARTESIAN_POINT('',(-1.925,1.31,3.25)); +#23170 = VECTOR('',#23171,1.); +#23171 = DIRECTION('',(0.,-1.,0.)); +#23172 = ORIENTED_EDGE('',*,*,#23173,.T.); +#23173 = EDGE_CURVE('',#23164,#23046,#23174,.T.); +#23174 = CIRCLE('',#23175,0.15); +#23175 = AXIS2_PLACEMENT_3D('',#23176,#23177,#23178); +#23176 = CARTESIAN_POINT('',(-1.925,1.16,3.1)); +#23177 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#23178 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23179 = ORIENTED_EDGE('',*,*,#23043,.F.); +#23180 = ORIENTED_EDGE('',*,*,#23181,.T.); +#23181 = EDGE_CURVE('',#23044,#23142,#23182,.T.); +#23182 = LINE('',#23183,#23184); +#23183 = CARTESIAN_POINT('',(-1.925,1.31,2.936601758237)); +#23184 = VECTOR('',#23185,1.); +#23185 = DIRECTION('',(0.,-1.,0.)); +#23186 = ORIENTED_EDGE('',*,*,#23141,.T.); +#23187 = ORIENTED_EDGE('',*,*,#23188,.T.); +#23188 = EDGE_CURVE('',#23134,#23166,#23189,.T.); +#23189 = CIRCLE('',#23190,0.15); +#23190 = AXIS2_PLACEMENT_3D('',#23191,#23192,#23193); +#23191 = CARTESIAN_POINT('',(-1.925,0.86,3.1)); +#23192 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#23193 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23194 = PLANE('',#23195); +#23195 = AXIS2_PLACEMENT_3D('',#23196,#23197,#23198); +#23196 = CARTESIAN_POINT('',(-1.925,1.31,2.936601758237)); +#23197 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#23198 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#23199 = ADVANCED_FACE('',(#23200),#23227,.T.); +#23200 = FACE_BOUND('',#23201,.T.); +#23201 = EDGE_LOOP('',(#23202,#23203,#23212,#23220)); +#23202 = ORIENTED_EDGE('',*,*,#23069,.F.); +#23203 = ORIENTED_EDGE('',*,*,#23204,.F.); +#23204 = EDGE_CURVE('',#23205,#23062,#23207,.T.); +#23205 = VERTEX_POINT('',#23206); +#23206 = CARTESIAN_POINT('',(-1.818428052096,1.31,2.798865573933)); +#23207 = CIRCLE('',#23208,0.240135709166); +#23208 = AXIS2_PLACEMENT_3D('',#23209,#23210,#23211); +#23209 = CARTESIAN_POINT('',(-2.015135709166,1.31,2.936601758237)); +#23210 = DIRECTION('',(0.,-1.,0.)); +#23211 = DIRECTION('',(0.819152044289,-0.,-0.573576436351)); +#23212 = ORIENTED_EDGE('',*,*,#23213,.T.); +#23213 = EDGE_CURVE('',#23205,#23214,#23216,.T.); +#23214 = VERTEX_POINT('',#23215); +#23215 = CARTESIAN_POINT('',(-1.941300858739,1.31,2.884902039386)); +#23216 = LINE('',#23217,#23218); +#23217 = CARTESIAN_POINT('',(-1.818428052096,1.31,2.798865573933)); +#23218 = VECTOR('',#23219,1.); +#23219 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#23220 = ORIENTED_EDGE('',*,*,#23221,.T.); +#23221 = EDGE_CURVE('',#23214,#23044,#23222,.T.); +#23222 = CIRCLE('',#23223,9.013570916571E-02); +#23223 = AXIS2_PLACEMENT_3D('',#23224,#23225,#23226); +#23224 = CARTESIAN_POINT('',(-2.015135709166,1.31,2.936601758237)); +#23225 = DIRECTION('',(0.,-1.,0.)); +#23226 = DIRECTION('',(0.819152044289,-0.,-0.573576436351)); +#23227 = PLANE('',#23228); +#23228 = AXIS2_PLACEMENT_3D('',#23229,#23230,#23231); +#23229 = CARTESIAN_POINT('',(-1.818428052096,1.31,2.798865573933)); +#23230 = DIRECTION('',(0.,1.,-0.)); +#23231 = DIRECTION('',(0.,0.,1.)); +#23232 = ADVANCED_FACE('',(#23233),#23252,.T.); +#23233 = FACE_BOUND('',#23234,.T.); +#23234 = EDGE_LOOP('',(#23235,#23236,#23237,#23246)); +#23235 = ORIENTED_EDGE('',*,*,#23204,.T.); +#23236 = ORIENTED_EDGE('',*,*,#23118,.F.); +#23237 = ORIENTED_EDGE('',*,*,#23238,.F.); +#23238 = EDGE_CURVE('',#23239,#23111,#23241,.T.); +#23239 = VERTEX_POINT('',#23240); +#23240 = CARTESIAN_POINT('',(-1.818428052096,0.71,2.798865573933)); +#23241 = CIRCLE('',#23242,0.240135709166); +#23242 = AXIS2_PLACEMENT_3D('',#23243,#23244,#23245); +#23243 = CARTESIAN_POINT('',(-2.015135709166,0.71,2.936601758237)); +#23244 = DIRECTION('',(0.,-1.,0.)); +#23245 = DIRECTION('',(0.819152044289,-0.,-0.573576436351)); +#23246 = ORIENTED_EDGE('',*,*,#23247,.T.); +#23247 = EDGE_CURVE('',#23239,#23205,#23248,.T.); +#23248 = LINE('',#23249,#23250); +#23249 = CARTESIAN_POINT('',(-1.818428052096,1.31,2.798865573933)); +#23250 = VECTOR('',#23251,1.); +#23251 = DIRECTION('',(0.,1.,0.)); +#23252 = CYLINDRICAL_SURFACE('',#23253,0.240135709166); +#23253 = AXIS2_PLACEMENT_3D('',#23254,#23255,#23256); +#23254 = CARTESIAN_POINT('',(-2.015135709166,0.,2.936601758237)); +#23255 = DIRECTION('',(-0.,-1.,0.)); +#23256 = DIRECTION('',(-0.,0.,-1.)); +#23257 = ADVANCED_FACE('',(#23258),#23277,.T.); +#23258 = FACE_BOUND('',#23259,.T.); +#23259 = EDGE_LOOP('',(#23260,#23261,#23262,#23271)); +#23260 = ORIENTED_EDGE('',*,*,#23238,.T.); +#23261 = ORIENTED_EDGE('',*,*,#23149,.F.); +#23262 = ORIENTED_EDGE('',*,*,#23263,.F.); +#23263 = EDGE_CURVE('',#23264,#23142,#23266,.T.); +#23264 = VERTEX_POINT('',#23265); +#23265 = CARTESIAN_POINT('',(-1.941300858739,0.71,2.884902039386)); +#23266 = CIRCLE('',#23267,9.013570916571E-02); +#23267 = AXIS2_PLACEMENT_3D('',#23268,#23269,#23270); +#23268 = CARTESIAN_POINT('',(-2.015135709166,0.71,2.936601758237)); +#23269 = DIRECTION('',(0.,-1.,0.)); +#23270 = DIRECTION('',(0.819152044289,-0.,-0.573576436351)); +#23271 = ORIENTED_EDGE('',*,*,#23272,.T.); +#23272 = EDGE_CURVE('',#23264,#23239,#23273,.T.); +#23273 = LINE('',#23274,#23275); +#23274 = CARTESIAN_POINT('',(-1.818428052096,0.71,2.798865573933)); +#23275 = VECTOR('',#23276,1.); +#23276 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#23277 = PLANE('',#23278); +#23278 = AXIS2_PLACEMENT_3D('',#23279,#23280,#23281); +#23279 = CARTESIAN_POINT('',(-1.818428052096,0.71,2.798865573933)); +#23280 = DIRECTION('',(0.,-1.,0.)); +#23281 = DIRECTION('',(0.,-0.,-1.)); +#23282 = ADVANCED_FACE('',(#23283),#23294,.F.); +#23283 = FACE_BOUND('',#23284,.F.); +#23284 = EDGE_LOOP('',(#23285,#23291,#23292,#23293)); +#23285 = ORIENTED_EDGE('',*,*,#23286,.F.); +#23286 = EDGE_CURVE('',#23214,#23264,#23287,.T.); +#23287 = LINE('',#23288,#23289); +#23288 = CARTESIAN_POINT('',(-1.941300858739,1.31,2.884902039386)); +#23289 = VECTOR('',#23290,1.); +#23290 = DIRECTION('',(0.,-1.,0.)); +#23291 = ORIENTED_EDGE('',*,*,#23221,.T.); +#23292 = ORIENTED_EDGE('',*,*,#23181,.T.); +#23293 = ORIENTED_EDGE('',*,*,#23263,.F.); +#23294 = CYLINDRICAL_SURFACE('',#23295,9.013570916571E-02); +#23295 = AXIS2_PLACEMENT_3D('',#23296,#23297,#23298); +#23296 = CARTESIAN_POINT('',(-2.015135709166,0.,2.936601758237)); +#23297 = DIRECTION('',(-0.,-1.,0.)); +#23298 = DIRECTION('',(-0.,0.,-1.)); +#23299 = ADVANCED_FACE('',(#23300),#23316,.T.); +#23300 = FACE_BOUND('',#23301,.T.); +#23301 = EDGE_LOOP('',(#23302,#23303,#23309,#23310)); +#23302 = ORIENTED_EDGE('',*,*,#23213,.F.); +#23303 = ORIENTED_EDGE('',*,*,#23304,.F.); +#23304 = EDGE_CURVE('',#22778,#23205,#23305,.T.); +#23305 = LINE('',#23306,#23307); +#23306 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#23307 = VECTOR('',#23308,1.); +#23308 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#23309 = ORIENTED_EDGE('',*,*,#22777,.T.); +#23310 = ORIENTED_EDGE('',*,*,#23311,.T.); +#23311 = EDGE_CURVE('',#22769,#23214,#23312,.T.); +#23312 = LINE('',#23313,#23314); +#23313 = CARTESIAN_POINT('',(-2.202447367972,1.31,2.511946172757)); +#23314 = VECTOR('',#23315,1.); +#23315 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#23316 = PLANE('',#23317); +#23317 = AXIS2_PLACEMENT_3D('',#23318,#23319,#23320); +#23318 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#23319 = DIRECTION('',(0.,1.,-0.)); +#23320 = DIRECTION('',(0.,0.,1.)); +#23321 = ADVANCED_FACE('',(#23322),#23338,.T.); +#23322 = FACE_BOUND('',#23323,.T.); +#23323 = EDGE_LOOP('',(#23324,#23325,#23326,#23332)); +#23324 = ORIENTED_EDGE('',*,*,#23304,.T.); +#23325 = ORIENTED_EDGE('',*,*,#23247,.F.); +#23326 = ORIENTED_EDGE('',*,*,#23327,.F.); +#23327 = EDGE_CURVE('',#22854,#23239,#23328,.T.); +#23328 = LINE('',#23329,#23330); +#23329 = CARTESIAN_POINT('',(-2.079574561329,0.71,2.425909707305)); +#23330 = VECTOR('',#23331,1.); +#23331 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#23332 = ORIENTED_EDGE('',*,*,#23333,.T.); +#23333 = EDGE_CURVE('',#22854,#22778,#23334,.T.); +#23334 = LINE('',#23335,#23336); +#23335 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#23336 = VECTOR('',#23337,1.); +#23337 = DIRECTION('',(0.,1.,0.)); +#23338 = PLANE('',#23339); +#23339 = AXIS2_PLACEMENT_3D('',#23340,#23341,#23342); +#23340 = CARTESIAN_POINT('',(-2.079574561329,1.31,2.425909707305)); +#23341 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#23342 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#23343 = ADVANCED_FACE('',(#23344),#23355,.T.); +#23344 = FACE_BOUND('',#23345,.T.); +#23345 = EDGE_LOOP('',(#23346,#23347,#23348,#23354)); +#23346 = ORIENTED_EDGE('',*,*,#23327,.T.); +#23347 = ORIENTED_EDGE('',*,*,#23272,.F.); +#23348 = ORIENTED_EDGE('',*,*,#23349,.F.); +#23349 = EDGE_CURVE('',#22837,#23264,#23350,.T.); +#23350 = LINE('',#23351,#23352); +#23351 = CARTESIAN_POINT('',(-2.202447367972,0.71,2.511946172757)); +#23352 = VECTOR('',#23353,1.); +#23353 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#23354 = ORIENTED_EDGE('',*,*,#22862,.T.); +#23355 = PLANE('',#23356); +#23356 = AXIS2_PLACEMENT_3D('',#23357,#23358,#23359); +#23357 = CARTESIAN_POINT('',(-2.079574561329,0.71,2.425909707305)); +#23358 = DIRECTION('',(0.,-1.,0.)); +#23359 = DIRECTION('',(0.,-0.,-1.)); +#23360 = ADVANCED_FACE('',(#23361),#23372,.T.); +#23361 = FACE_BOUND('',#23362,.T.); +#23362 = EDGE_LOOP('',(#23363,#23364,#23365,#23366)); +#23363 = ORIENTED_EDGE('',*,*,#23349,.T.); +#23364 = ORIENTED_EDGE('',*,*,#23286,.F.); +#23365 = ORIENTED_EDGE('',*,*,#23311,.F.); +#23366 = ORIENTED_EDGE('',*,*,#23367,.T.); +#23367 = EDGE_CURVE('',#22769,#22837,#23368,.T.); +#23368 = LINE('',#23369,#23370); +#23369 = CARTESIAN_POINT('',(-2.202447367972,1.31,2.511946172757)); +#23370 = VECTOR('',#23371,1.); +#23371 = DIRECTION('',(0.,-1.,0.)); +#23372 = PLANE('',#23373); +#23373 = AXIS2_PLACEMENT_3D('',#23374,#23375,#23376); +#23374 = CARTESIAN_POINT('',(-2.202447367972,1.31,2.511946172757)); +#23375 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#23376 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#23377 = ADVANCED_FACE('',(#23378),#23391,.F.); +#23378 = FACE_BOUND('',#23379,.F.); +#23379 = EDGE_LOOP('',(#23380,#23381,#23388,#23389,#23390)); +#23380 = ORIENTED_EDGE('',*,*,#22979,.F.); +#23381 = ORIENTED_EDGE('',*,*,#23382,.F.); +#23382 = EDGE_CURVE('',#22846,#22980,#23383,.T.); +#23383 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#23384,#23385,#23386,#23387), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.171468027976E-06), + .PIECEWISE_BEZIER_KNOTS.); +#23384 = CARTESIAN_POINT('',(-2.089554180487,0.71,2.4)); +#23385 = CARTESIAN_POINT('',(-2.08985090245,0.71,2.397627997602)); +#23386 = CARTESIAN_POINT('',(-2.09,0.709943264601,2.395232208042)); +#23387 = CARTESIAN_POINT('',(-2.09,0.709829229338,2.392844440202)); +#23388 = ORIENTED_EDGE('',*,*,#22853,.T.); +#23389 = ORIENTED_EDGE('',*,*,#23333,.T.); +#23390 = ORIENTED_EDGE('',*,*,#22785,.F.); +#23391 = CYLINDRICAL_SURFACE('',#23392,5.764753397594E-02); +#23392 = AXIS2_PLACEMENT_3D('',#23393,#23394,#23395); +#23393 = CARTESIAN_POINT('',(-2.032352466024,0.,2.392844440202)); +#23394 = DIRECTION('',(0.,1.,0.)); +#23395 = DIRECTION('',(0.,-0.,1.)); +#23396 = ADVANCED_FACE('',(#23397),#23410,.T.); +#23397 = FACE_BOUND('',#23398,.T.); +#23398 = EDGE_LOOP('',(#23399,#23400,#23407,#23408,#23409)); +#23399 = ORIENTED_EDGE('',*,*,#21666,.F.); +#23400 = ORIENTED_EDGE('',*,*,#23401,.T.); +#23401 = EDGE_CURVE('',#21658,#22835,#23402,.T.); +#23402 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#23403,#23404,#23405,#23406), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.158659670393E-06), + .PIECEWISE_BEZIER_KNOTS.); +#23403 = CARTESIAN_POINT('',(-2.24,0.709829229338,2.392844440202)); +#23404 = CARTESIAN_POINT('',(-2.24,0.709943060932,2.39522794345)); +#23405 = CARTESIAN_POINT('',(-2.23995890207,0.71,2.397615197349)); +#23406 = CARTESIAN_POINT('',(-2.239876672637,0.71,2.4)); +#23407 = ORIENTED_EDGE('',*,*,#22834,.T.); +#23408 = ORIENTED_EDGE('',*,*,#23367,.F.); +#23409 = ORIENTED_EDGE('',*,*,#22768,.F.); +#23410 = CYLINDRICAL_SURFACE('',#23411,0.207647533976); +#23411 = AXIS2_PLACEMENT_3D('',#23412,#23413,#23414); +#23412 = CARTESIAN_POINT('',(-2.032352466024,0.,2.392844440202)); +#23413 = DIRECTION('',(0.,1.,0.)); +#23414 = DIRECTION('',(0.,-0.,1.)); +#23415 = ADVANCED_FACE('',(#23416),#23432,.F.); +#23416 = FACE_BOUND('',#23417,.T.); +#23417 = EDGE_LOOP('',(#23418,#23419,#23425,#23426)); +#23418 = ORIENTED_EDGE('',*,*,#23093,.T.); +#23419 = ORIENTED_EDGE('',*,*,#23420,.T.); +#23420 = EDGE_CURVE('',#23085,#23164,#23421,.T.); +#23421 = LINE('',#23422,#23423); +#23422 = CARTESIAN_POINT('',(-1.925,1.16,3.25)); +#23423 = VECTOR('',#23424,1.); +#23424 = DIRECTION('',(-1.,0.,0.)); +#23425 = ORIENTED_EDGE('',*,*,#23163,.T.); +#23426 = ORIENTED_EDGE('',*,*,#23427,.T.); +#23427 = EDGE_CURVE('',#23166,#23094,#23428,.T.); +#23428 = LINE('',#23429,#23430); +#23429 = CARTESIAN_POINT('',(-1.775,0.86,3.25)); +#23430 = VECTOR('',#23431,1.); +#23431 = DIRECTION('',(1.,0.,0.)); +#23432 = PLANE('',#23433); +#23433 = AXIS2_PLACEMENT_3D('',#23434,#23435,#23436); +#23434 = CARTESIAN_POINT('',(0.315,0.,3.25)); +#23435 = DIRECTION('',(0.,0.,-1.)); +#23436 = DIRECTION('',(-1.,0.,0.)); +#23437 = ADVANCED_FACE('',(#23438),#23472,.T.); +#23438 = FACE_BOUND('',#23439,.T.); +#23439 = EDGE_LOOP('',(#23440,#23450,#23458,#23466)); +#23440 = ORIENTED_EDGE('',*,*,#23441,.T.); +#23441 = EDGE_CURVE('',#23442,#23444,#23446,.T.); +#23442 = VERTEX_POINT('',#23443); +#23443 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23444 = VERTEX_POINT('',#23445); +#23445 = CARTESIAN_POINT('',(-1.775,1.31,0.4)); +#23446 = LINE('',#23447,#23448); +#23447 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23448 = VECTOR('',#23449,1.); +#23449 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23450 = ORIENTED_EDGE('',*,*,#23451,.T.); +#23451 = EDGE_CURVE('',#23444,#23452,#23454,.T.); +#23452 = VERTEX_POINT('',#23453); +#23453 = CARTESIAN_POINT('',(-1.925,1.31,0.4)); +#23454 = LINE('',#23455,#23456); +#23455 = CARTESIAN_POINT('',(-1.925,1.31,0.4)); +#23456 = VECTOR('',#23457,1.); +#23457 = DIRECTION('',(-1.,0.,-0.)); +#23458 = ORIENTED_EDGE('',*,*,#23459,.F.); +#23459 = EDGE_CURVE('',#23460,#23452,#23462,.T.); +#23460 = VERTEX_POINT('',#23461); +#23461 = CARTESIAN_POINT('',(-1.925,1.31,0.563398241763)); +#23462 = LINE('',#23463,#23464); +#23463 = CARTESIAN_POINT('',(-1.925,1.31,0.563398241763)); +#23464 = VECTOR('',#23465,1.); +#23465 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23466 = ORIENTED_EDGE('',*,*,#23467,.T.); +#23467 = EDGE_CURVE('',#23460,#23442,#23468,.T.); +#23468 = LINE('',#23469,#23470); +#23469 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23470 = VECTOR('',#23471,1.); +#23471 = DIRECTION('',(1.,-0.,-0.)); +#23472 = PLANE('',#23473); +#23473 = AXIS2_PLACEMENT_3D('',#23474,#23475,#23476); +#23474 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23475 = DIRECTION('',(0.,1.,-0.)); +#23476 = DIRECTION('',(0.,0.,1.)); +#23477 = ADVANCED_FACE('',(#23478),#23521,.T.); +#23478 = FACE_BOUND('',#23479,.T.); +#23479 = EDGE_LOOP('',(#23480,#23481,#23490,#23498,#23507,#23515)); +#23480 = ORIENTED_EDGE('',*,*,#23459,.T.); +#23481 = ORIENTED_EDGE('',*,*,#23482,.T.); +#23482 = EDGE_CURVE('',#23452,#23483,#23485,.T.); +#23483 = VERTEX_POINT('',#23484); +#23484 = CARTESIAN_POINT('',(-1.925,1.16,0.25)); +#23485 = CIRCLE('',#23486,0.15); +#23486 = AXIS2_PLACEMENT_3D('',#23487,#23488,#23489); +#23487 = CARTESIAN_POINT('',(-1.925,1.16,0.4)); +#23488 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#23489 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#23490 = ORIENTED_EDGE('',*,*,#23491,.F.); +#23491 = EDGE_CURVE('',#23492,#23483,#23494,.T.); +#23492 = VERTEX_POINT('',#23493); +#23493 = CARTESIAN_POINT('',(-1.925,0.86,0.25)); +#23494 = LINE('',#23495,#23496); +#23495 = CARTESIAN_POINT('',(-1.925,1.31,0.25)); +#23496 = VECTOR('',#23497,1.); +#23497 = DIRECTION('',(-0.,1.,-0.)); +#23498 = ORIENTED_EDGE('',*,*,#23499,.T.); +#23499 = EDGE_CURVE('',#23492,#23500,#23502,.T.); +#23500 = VERTEX_POINT('',#23501); +#23501 = CARTESIAN_POINT('',(-1.925,0.71,0.4)); +#23502 = CIRCLE('',#23503,0.15); +#23503 = AXIS2_PLACEMENT_3D('',#23504,#23505,#23506); +#23504 = CARTESIAN_POINT('',(-1.925,0.86,0.4)); +#23505 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#23506 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#23507 = ORIENTED_EDGE('',*,*,#23508,.F.); +#23508 = EDGE_CURVE('',#23509,#23500,#23511,.T.); +#23509 = VERTEX_POINT('',#23510); +#23510 = CARTESIAN_POINT('',(-1.925,0.71,0.563398241763)); +#23511 = LINE('',#23512,#23513); +#23512 = CARTESIAN_POINT('',(-1.925,0.71,0.563398241763)); +#23513 = VECTOR('',#23514,1.); +#23514 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23515 = ORIENTED_EDGE('',*,*,#23516,.T.); +#23516 = EDGE_CURVE('',#23509,#23460,#23517,.T.); +#23517 = LINE('',#23518,#23519); +#23518 = CARTESIAN_POINT('',(-1.925,1.31,0.563398241763)); +#23519 = VECTOR('',#23520,1.); +#23520 = DIRECTION('',(-0.,1.,-0.)); +#23521 = PLANE('',#23522); +#23522 = AXIS2_PLACEMENT_3D('',#23523,#23524,#23525); +#23523 = CARTESIAN_POINT('',(-1.925,1.31,0.563398241763)); +#23524 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#23525 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#23526 = ADVANCED_FACE('',(#23527),#23552,.T.); +#23527 = FACE_BOUND('',#23528,.T.); +#23528 = EDGE_LOOP('',(#23529,#23530,#23538,#23546)); +#23529 = ORIENTED_EDGE('',*,*,#23508,.T.); +#23530 = ORIENTED_EDGE('',*,*,#23531,.T.); +#23531 = EDGE_CURVE('',#23500,#23532,#23534,.T.); +#23532 = VERTEX_POINT('',#23533); +#23533 = CARTESIAN_POINT('',(-1.775,0.71,0.4)); +#23534 = LINE('',#23535,#23536); +#23535 = CARTESIAN_POINT('',(-1.775,0.71,0.4)); +#23536 = VECTOR('',#23537,1.); +#23537 = DIRECTION('',(1.,-0.,-0.)); +#23538 = ORIENTED_EDGE('',*,*,#23539,.F.); +#23539 = EDGE_CURVE('',#23540,#23532,#23542,.T.); +#23540 = VERTEX_POINT('',#23541); +#23541 = CARTESIAN_POINT('',(-1.775,0.71,0.563398241763)); +#23542 = LINE('',#23543,#23544); +#23543 = CARTESIAN_POINT('',(-1.775,0.71,0.563398241763)); +#23544 = VECTOR('',#23545,1.); +#23545 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23546 = ORIENTED_EDGE('',*,*,#23547,.T.); +#23547 = EDGE_CURVE('',#23540,#23509,#23548,.T.); +#23548 = LINE('',#23549,#23550); +#23549 = CARTESIAN_POINT('',(-1.775,0.71,0.563398241763)); +#23550 = VECTOR('',#23551,1.); +#23551 = DIRECTION('',(-1.,-0.,-0.)); +#23552 = PLANE('',#23553); +#23553 = AXIS2_PLACEMENT_3D('',#23554,#23555,#23556); +#23554 = CARTESIAN_POINT('',(-1.775,0.71,0.563398241763)); +#23555 = DIRECTION('',(0.,-1.,0.)); +#23556 = DIRECTION('',(0.,0.,-1.)); +#23557 = ADVANCED_FACE('',(#23558),#23592,.T.); +#23558 = FACE_BOUND('',#23559,.T.); +#23559 = EDGE_LOOP('',(#23560,#23570,#23577,#23578,#23584,#23585)); +#23560 = ORIENTED_EDGE('',*,*,#23561,.F.); +#23561 = EDGE_CURVE('',#23562,#23564,#23566,.T.); +#23562 = VERTEX_POINT('',#23563); +#23563 = CARTESIAN_POINT('',(-1.775,1.16,0.25)); +#23564 = VERTEX_POINT('',#23565); +#23565 = CARTESIAN_POINT('',(-1.775,0.86,0.25)); +#23566 = LINE('',#23567,#23568); +#23567 = CARTESIAN_POINT('',(-1.775,1.31,0.25)); +#23568 = VECTOR('',#23569,1.); +#23569 = DIRECTION('',(-0.,-1.,-0.)); +#23570 = ORIENTED_EDGE('',*,*,#23571,.T.); +#23571 = EDGE_CURVE('',#23562,#23444,#23572,.T.); +#23572 = CIRCLE('',#23573,0.15); +#23573 = AXIS2_PLACEMENT_3D('',#23574,#23575,#23576); +#23574 = CARTESIAN_POINT('',(-1.775,1.16,0.4)); +#23575 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#23576 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23577 = ORIENTED_EDGE('',*,*,#23441,.F.); +#23578 = ORIENTED_EDGE('',*,*,#23579,.T.); +#23579 = EDGE_CURVE('',#23442,#23540,#23580,.T.); +#23580 = LINE('',#23581,#23582); +#23581 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23582 = VECTOR('',#23583,1.); +#23583 = DIRECTION('',(-0.,-1.,-0.)); +#23584 = ORIENTED_EDGE('',*,*,#23539,.T.); +#23585 = ORIENTED_EDGE('',*,*,#23586,.T.); +#23586 = EDGE_CURVE('',#23532,#23564,#23587,.T.); +#23587 = CIRCLE('',#23588,0.15); +#23588 = AXIS2_PLACEMENT_3D('',#23589,#23590,#23591); +#23589 = CARTESIAN_POINT('',(-1.775,0.86,0.4)); +#23590 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#23591 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23592 = PLANE('',#23593); +#23593 = AXIS2_PLACEMENT_3D('',#23594,#23595,#23596); +#23594 = CARTESIAN_POINT('',(-1.775,1.31,0.563398241763)); +#23595 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#23596 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#23597 = ADVANCED_FACE('',(#23598),#23625,.T.); +#23598 = FACE_BOUND('',#23599,.T.); +#23599 = EDGE_LOOP('',(#23600,#23601,#23610,#23618)); +#23600 = ORIENTED_EDGE('',*,*,#23467,.F.); +#23601 = ORIENTED_EDGE('',*,*,#23602,.F.); +#23602 = EDGE_CURVE('',#23603,#23460,#23605,.T.); +#23603 = VERTEX_POINT('',#23604); +#23604 = CARTESIAN_POINT('',(-1.941300858739,1.31,0.615097960614)); +#23605 = CIRCLE('',#23606,9.013570916571E-02); +#23606 = AXIS2_PLACEMENT_3D('',#23607,#23608,#23609); +#23607 = CARTESIAN_POINT('',(-2.015135709166,1.31,0.563398241763)); +#23608 = DIRECTION('',(-0.,1.,0.)); +#23609 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#23610 = ORIENTED_EDGE('',*,*,#23611,.T.); +#23611 = EDGE_CURVE('',#23603,#23612,#23614,.T.); +#23612 = VERTEX_POINT('',#23613); +#23613 = CARTESIAN_POINT('',(-1.818428052096,1.31,0.701134426067)); +#23614 = LINE('',#23615,#23616); +#23615 = CARTESIAN_POINT('',(-1.818428052096,1.31,0.701134426067)); +#23616 = VECTOR('',#23617,1.); +#23617 = DIRECTION('',(0.819152044289,-0.,0.573576436351)); +#23618 = ORIENTED_EDGE('',*,*,#23619,.T.); +#23619 = EDGE_CURVE('',#23612,#23442,#23620,.T.); +#23620 = CIRCLE('',#23621,0.240135709166); +#23621 = AXIS2_PLACEMENT_3D('',#23622,#23623,#23624); +#23622 = CARTESIAN_POINT('',(-2.015135709166,1.31,0.563398241763)); +#23623 = DIRECTION('',(-0.,1.,0.)); +#23624 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#23625 = PLANE('',#23626); +#23626 = AXIS2_PLACEMENT_3D('',#23627,#23628,#23629); +#23627 = CARTESIAN_POINT('',(-1.818428052096,1.31,0.701134426067)); +#23628 = DIRECTION('',(-0.,1.,0.)); +#23629 = DIRECTION('',(0.,0.,1.)); +#23630 = ADVANCED_FACE('',(#23631),#23650,.F.); +#23631 = FACE_BOUND('',#23632,.F.); +#23632 = EDGE_LOOP('',(#23633,#23641,#23648,#23649)); +#23633 = ORIENTED_EDGE('',*,*,#23634,.F.); +#23634 = EDGE_CURVE('',#23635,#23603,#23637,.T.); +#23635 = VERTEX_POINT('',#23636); +#23636 = CARTESIAN_POINT('',(-1.941300858739,0.71,0.615097960614)); +#23637 = LINE('',#23638,#23639); +#23638 = CARTESIAN_POINT('',(-1.941300858739,1.31,0.615097960614)); +#23639 = VECTOR('',#23640,1.); +#23640 = DIRECTION('',(-0.,1.,-0.)); +#23641 = ORIENTED_EDGE('',*,*,#23642,.T.); +#23642 = EDGE_CURVE('',#23635,#23509,#23643,.T.); +#23643 = CIRCLE('',#23644,9.013570916571E-02); +#23644 = AXIS2_PLACEMENT_3D('',#23645,#23646,#23647); +#23645 = CARTESIAN_POINT('',(-2.015135709166,0.71,0.563398241763)); +#23646 = DIRECTION('',(-0.,1.,0.)); +#23647 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#23648 = ORIENTED_EDGE('',*,*,#23516,.T.); +#23649 = ORIENTED_EDGE('',*,*,#23602,.F.); +#23650 = CYLINDRICAL_SURFACE('',#23651,9.013570916571E-02); +#23651 = AXIS2_PLACEMENT_3D('',#23652,#23653,#23654); +#23652 = CARTESIAN_POINT('',(-2.015135709166,0.,0.563398241763)); +#23653 = DIRECTION('',(-0.,1.,0.)); +#23654 = DIRECTION('',(0.,0.,1.)); +#23655 = ADVANCED_FACE('',(#23656),#23675,.T.); +#23656 = FACE_BOUND('',#23657,.T.); +#23657 = EDGE_LOOP('',(#23658,#23659,#23660,#23669)); +#23658 = ORIENTED_EDGE('',*,*,#23642,.T.); +#23659 = ORIENTED_EDGE('',*,*,#23547,.F.); +#23660 = ORIENTED_EDGE('',*,*,#23661,.F.); +#23661 = EDGE_CURVE('',#23662,#23540,#23664,.T.); +#23662 = VERTEX_POINT('',#23663); +#23663 = CARTESIAN_POINT('',(-1.818428052096,0.71,0.701134426067)); +#23664 = CIRCLE('',#23665,0.240135709166); +#23665 = AXIS2_PLACEMENT_3D('',#23666,#23667,#23668); +#23666 = CARTESIAN_POINT('',(-2.015135709166,0.71,0.563398241763)); +#23667 = DIRECTION('',(-0.,1.,0.)); +#23668 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#23669 = ORIENTED_EDGE('',*,*,#23670,.T.); +#23670 = EDGE_CURVE('',#23662,#23635,#23671,.T.); +#23671 = LINE('',#23672,#23673); +#23672 = CARTESIAN_POINT('',(-1.818428052096,0.71,0.701134426067)); +#23673 = VECTOR('',#23674,1.); +#23674 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#23675 = PLANE('',#23676); +#23676 = AXIS2_PLACEMENT_3D('',#23677,#23678,#23679); +#23677 = CARTESIAN_POINT('',(-1.818428052096,0.71,0.701134426067)); +#23678 = DIRECTION('',(0.,-1.,0.)); +#23679 = DIRECTION('',(0.,0.,-1.)); +#23680 = ADVANCED_FACE('',(#23681),#23692,.T.); +#23681 = FACE_BOUND('',#23682,.T.); +#23682 = EDGE_LOOP('',(#23683,#23684,#23685,#23686)); +#23683 = ORIENTED_EDGE('',*,*,#23661,.T.); +#23684 = ORIENTED_EDGE('',*,*,#23579,.F.); +#23685 = ORIENTED_EDGE('',*,*,#23619,.F.); +#23686 = ORIENTED_EDGE('',*,*,#23687,.T.); +#23687 = EDGE_CURVE('',#23612,#23662,#23688,.T.); +#23688 = LINE('',#23689,#23690); +#23689 = CARTESIAN_POINT('',(-1.818428052096,1.31,0.701134426067)); +#23690 = VECTOR('',#23691,1.); +#23691 = DIRECTION('',(-0.,-1.,-0.)); +#23692 = CYLINDRICAL_SURFACE('',#23693,0.240135709166); +#23693 = AXIS2_PLACEMENT_3D('',#23694,#23695,#23696); +#23694 = CARTESIAN_POINT('',(-2.015135709166,0.,0.563398241763)); +#23695 = DIRECTION('',(-0.,1.,0.)); +#23696 = DIRECTION('',(0.,0.,1.)); +#23697 = ADVANCED_FACE('',(#23698),#23714,.T.); +#23698 = FACE_BOUND('',#23699,.T.); +#23699 = EDGE_LOOP('',(#23700,#23701,#23707,#23708)); +#23700 = ORIENTED_EDGE('',*,*,#23611,.F.); +#23701 = ORIENTED_EDGE('',*,*,#23702,.F.); +#23702 = EDGE_CURVE('',#22812,#23603,#23703,.T.); +#23703 = LINE('',#23704,#23705); +#23704 = CARTESIAN_POINT('',(-2.202447367972,1.31,0.988053827243)); +#23705 = VECTOR('',#23706,1.); +#23706 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#23707 = ORIENTED_EDGE('',*,*,#22811,.T.); +#23708 = ORIENTED_EDGE('',*,*,#23709,.T.); +#23709 = EDGE_CURVE('',#22803,#23612,#23710,.T.); +#23710 = LINE('',#23711,#23712); +#23711 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#23712 = VECTOR('',#23713,1.); +#23713 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#23714 = PLANE('',#23715); +#23715 = AXIS2_PLACEMENT_3D('',#23716,#23717,#23718); +#23716 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#23717 = DIRECTION('',(-0.,1.,0.)); +#23718 = DIRECTION('',(0.,0.,1.)); +#23719 = ADVANCED_FACE('',(#23720),#23736,.T.); +#23720 = FACE_BOUND('',#23721,.T.); +#23721 = EDGE_LOOP('',(#23722,#23723,#23724,#23730)); +#23722 = ORIENTED_EDGE('',*,*,#23702,.T.); +#23723 = ORIENTED_EDGE('',*,*,#23634,.F.); +#23724 = ORIENTED_EDGE('',*,*,#23725,.F.); +#23725 = EDGE_CURVE('',#22745,#23635,#23726,.T.); +#23726 = LINE('',#23727,#23728); +#23727 = CARTESIAN_POINT('',(-2.202447367972,0.71,0.988053827243)); +#23728 = VECTOR('',#23729,1.); +#23729 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#23730 = ORIENTED_EDGE('',*,*,#23731,.T.); +#23731 = EDGE_CURVE('',#22745,#22812,#23732,.T.); +#23732 = LINE('',#23733,#23734); +#23733 = CARTESIAN_POINT('',(-2.202447367972,1.31,0.988053827243)); +#23734 = VECTOR('',#23735,1.); +#23735 = DIRECTION('',(-0.,1.,-0.)); +#23736 = PLANE('',#23737); +#23737 = AXIS2_PLACEMENT_3D('',#23738,#23739,#23740); +#23738 = CARTESIAN_POINT('',(-2.202447367972,1.31,0.988053827243)); +#23739 = DIRECTION('',(-0.819152044289,0.,-0.573576436351)); +#23740 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#23741 = ADVANCED_FACE('',(#23742),#23753,.T.); +#23742 = FACE_BOUND('',#23743,.T.); +#23743 = EDGE_LOOP('',(#23744,#23745,#23746,#23752)); +#23744 = ORIENTED_EDGE('',*,*,#23725,.T.); +#23745 = ORIENTED_EDGE('',*,*,#23670,.F.); +#23746 = ORIENTED_EDGE('',*,*,#23747,.F.); +#23747 = EDGE_CURVE('',#22728,#23662,#23748,.T.); +#23748 = LINE('',#23749,#23750); +#23749 = CARTESIAN_POINT('',(-2.079574561329,0.71,1.074090292695)); +#23750 = VECTOR('',#23751,1.); +#23751 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#23752 = ORIENTED_EDGE('',*,*,#22753,.T.); +#23753 = PLANE('',#23754); +#23754 = AXIS2_PLACEMENT_3D('',#23755,#23756,#23757); +#23755 = CARTESIAN_POINT('',(-2.079574561329,0.71,1.074090292695)); +#23756 = DIRECTION('',(0.,-1.,0.)); +#23757 = DIRECTION('',(0.,0.,-1.)); +#23758 = ADVANCED_FACE('',(#23759),#23770,.T.); +#23759 = FACE_BOUND('',#23760,.T.); +#23760 = EDGE_LOOP('',(#23761,#23762,#23763,#23764)); +#23761 = ORIENTED_EDGE('',*,*,#23747,.T.); +#23762 = ORIENTED_EDGE('',*,*,#23687,.F.); +#23763 = ORIENTED_EDGE('',*,*,#23709,.F.); +#23764 = ORIENTED_EDGE('',*,*,#23765,.T.); +#23765 = EDGE_CURVE('',#22803,#22728,#23766,.T.); +#23766 = LINE('',#23767,#23768); +#23767 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#23768 = VECTOR('',#23769,1.); +#23769 = DIRECTION('',(-0.,-1.,-0.)); +#23770 = PLANE('',#23771); +#23771 = AXIS2_PLACEMENT_3D('',#23772,#23773,#23774); +#23772 = CARTESIAN_POINT('',(-2.079574561329,1.31,1.074090292695)); +#23773 = DIRECTION('',(0.819152044289,-0.,0.573576436351)); +#23774 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#23775 = ADVANCED_FACE('',(#23776),#23789,.T.); +#23776 = FACE_BOUND('',#23777,.T.); +#23777 = EDGE_LOOP('',(#23778,#23779,#23780,#23781,#23788)); +#23778 = ORIENTED_EDGE('',*,*,#22819,.T.); +#23779 = ORIENTED_EDGE('',*,*,#23731,.F.); +#23780 = ORIENTED_EDGE('',*,*,#22744,.F.); +#23781 = ORIENTED_EDGE('',*,*,#23782,.T.); +#23782 = EDGE_CURVE('',#22737,#21683,#23783,.T.); +#23783 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#23784,#23785,#23786,#23787), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.158659670394E-06), + .PIECEWISE_BEZIER_KNOTS.); +#23784 = CARTESIAN_POINT('',(-2.239876672637,0.71,1.1)); +#23785 = CARTESIAN_POINT('',(-2.23995890207,0.71,1.102384802651)); +#23786 = CARTESIAN_POINT('',(-2.24,0.709943060932,1.10477205655)); +#23787 = CARTESIAN_POINT('',(-2.24,0.709829229338,1.107155559798)); +#23788 = ORIENTED_EDGE('',*,*,#21682,.F.); +#23789 = CYLINDRICAL_SURFACE('',#23790,0.207647533976); +#23790 = AXIS2_PLACEMENT_3D('',#23791,#23792,#23793); +#23791 = CARTESIAN_POINT('',(-2.032352466024,0.,1.107155559798)); +#23792 = DIRECTION('',(-0.,-1.,-0.)); +#23793 = DIRECTION('',(0.,0.,-1.)); +#23794 = ADVANCED_FACE('',(#23795),#23808,.F.); +#23795 = FACE_BOUND('',#23796,.F.); +#23796 = EDGE_LOOP('',(#23797,#23798,#23799,#23800,#23807)); +#23797 = ORIENTED_EDGE('',*,*,#22802,.T.); +#23798 = ORIENTED_EDGE('',*,*,#23765,.T.); +#23799 = ORIENTED_EDGE('',*,*,#22725,.F.); +#23800 = ORIENTED_EDGE('',*,*,#23801,.F.); +#23801 = EDGE_CURVE('',#22964,#22726,#23802,.T.); +#23802 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#23803,#23804,#23805,#23806), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.171468027976E-06), + .PIECEWISE_BEZIER_KNOTS.); +#23803 = CARTESIAN_POINT('',(-2.09,0.709829229338,1.107155559798)); +#23804 = CARTESIAN_POINT('',(-2.09,0.709943264601,1.104767791958)); +#23805 = CARTESIAN_POINT('',(-2.08985090245,0.71,1.102372002398)); +#23806 = CARTESIAN_POINT('',(-2.089554180487,0.71,1.1)); +#23807 = ORIENTED_EDGE('',*,*,#22972,.F.); +#23808 = CYLINDRICAL_SURFACE('',#23809,5.764753397594E-02); +#23809 = AXIS2_PLACEMENT_3D('',#23810,#23811,#23812); +#23810 = CARTESIAN_POINT('',(-2.032352466024,0.,1.107155559798)); +#23811 = DIRECTION('',(-0.,-1.,-0.)); +#23812 = DIRECTION('',(0.,0.,-1.)); +#23813 = ADVANCED_FACE('',(#23814),#23830,.F.); +#23814 = FACE_BOUND('',#23815,.T.); +#23815 = EDGE_LOOP('',(#23816,#23817,#23823,#23824)); +#23816 = ORIENTED_EDGE('',*,*,#23491,.T.); +#23817 = ORIENTED_EDGE('',*,*,#23818,.T.); +#23818 = EDGE_CURVE('',#23483,#23562,#23819,.T.); +#23819 = LINE('',#23820,#23821); +#23820 = CARTESIAN_POINT('',(-1.775,1.16,0.25)); +#23821 = VECTOR('',#23822,1.); +#23822 = DIRECTION('',(1.,-0.,0.)); +#23823 = ORIENTED_EDGE('',*,*,#23561,.T.); +#23824 = ORIENTED_EDGE('',*,*,#23825,.T.); +#23825 = EDGE_CURVE('',#23564,#23492,#23826,.T.); +#23826 = LINE('',#23827,#23828); +#23827 = CARTESIAN_POINT('',(-1.925,0.86,0.25)); +#23828 = VECTOR('',#23829,1.); +#23829 = DIRECTION('',(-1.,0.,0.)); +#23830 = PLANE('',#23831); +#23831 = AXIS2_PLACEMENT_3D('',#23832,#23833,#23834); +#23832 = CARTESIAN_POINT('',(0.315,0.,0.25)); +#23833 = DIRECTION('',(0.,0.,1.)); +#23834 = DIRECTION('',(-1.,0.,0.)); +#23835 = ADVANCED_FACE('',(#23836),#23842,.F.); +#23836 = FACE_BOUND('',#23837,.F.); +#23837 = EDGE_LOOP('',(#23838,#23839,#23840,#23841)); +#23838 = ORIENTED_EDGE('',*,*,#22618,.T.); +#23839 = ORIENTED_EDGE('',*,*,#21758,.T.); +#23840 = ORIENTED_EDGE('',*,*,#22587,.T.); +#23841 = ORIENTED_EDGE('',*,*,#23028,.T.); +#23842 = CYLINDRICAL_SURFACE('',#23843,0.15); +#23843 = AXIS2_PLACEMENT_3D('',#23844,#23845,#23846); +#23844 = CARTESIAN_POINT('',(-2.09,-0.5,0.8)); +#23845 = DIRECTION('',(1.,0.,0.)); +#23846 = DIRECTION('',(0.,0.,-1.)); +#23847 = ADVANCED_FACE('',(#23848),#23854,.T.); +#23848 = FACE_BOUND('',#23849,.T.); +#23849 = EDGE_LOOP('',(#23850,#23851,#23852,#23853)); +#23850 = ORIENTED_EDGE('',*,*,#23084,.F.); +#23851 = ORIENTED_EDGE('',*,*,#23053,.F.); +#23852 = ORIENTED_EDGE('',*,*,#23173,.F.); +#23853 = ORIENTED_EDGE('',*,*,#23420,.F.); +#23854 = CYLINDRICAL_SURFACE('',#23855,0.15); +#23855 = AXIS2_PLACEMENT_3D('',#23856,#23857,#23858); +#23856 = CARTESIAN_POINT('',(0.315,1.16,3.1)); +#23857 = DIRECTION('',(1.,0.,0.)); +#23858 = DIRECTION('',(0.,0.,-1.)); +#23859 = ADVANCED_FACE('',(#23860),#23866,.T.); +#23860 = FACE_BOUND('',#23861,.T.); +#23861 = EDGE_LOOP('',(#23862,#23863,#23864,#23865)); +#23862 = ORIENTED_EDGE('',*,*,#23188,.F.); +#23863 = ORIENTED_EDGE('',*,*,#23133,.F.); +#23864 = ORIENTED_EDGE('',*,*,#23101,.F.); +#23865 = ORIENTED_EDGE('',*,*,#23427,.F.); +#23866 = CYLINDRICAL_SURFACE('',#23867,0.15); +#23867 = AXIS2_PLACEMENT_3D('',#23868,#23869,#23870); +#23868 = CARTESIAN_POINT('',(0.315,0.86,3.1)); +#23869 = DIRECTION('',(-1.,0.,0.)); +#23870 = DIRECTION('',(0.,0.,1.)); +#23871 = ADVANCED_FACE('',(#23872),#23878,.T.); +#23872 = FACE_BOUND('',#23873,.T.); +#23873 = EDGE_LOOP('',(#23874,#23875,#23876,#23877)); +#23874 = ORIENTED_EDGE('',*,*,#23482,.F.); +#23875 = ORIENTED_EDGE('',*,*,#23451,.F.); +#23876 = ORIENTED_EDGE('',*,*,#23571,.F.); +#23877 = ORIENTED_EDGE('',*,*,#23818,.F.); +#23878 = CYLINDRICAL_SURFACE('',#23879,0.15); +#23879 = AXIS2_PLACEMENT_3D('',#23880,#23881,#23882); +#23880 = CARTESIAN_POINT('',(0.315,1.16,0.4)); +#23881 = DIRECTION('',(-1.,0.,0.)); +#23882 = DIRECTION('',(0.,0.,1.)); +#23883 = ADVANCED_FACE('',(#23884),#23890,.T.); +#23884 = FACE_BOUND('',#23885,.T.); +#23885 = EDGE_LOOP('',(#23886,#23887,#23888,#23889)); +#23886 = ORIENTED_EDGE('',*,*,#23586,.F.); +#23887 = ORIENTED_EDGE('',*,*,#23531,.F.); +#23888 = ORIENTED_EDGE('',*,*,#23499,.F.); +#23889 = ORIENTED_EDGE('',*,*,#23825,.F.); +#23890 = CYLINDRICAL_SURFACE('',#23891,0.15); +#23891 = AXIS2_PLACEMENT_3D('',#23892,#23893,#23894); +#23892 = CARTESIAN_POINT('',(0.315,0.86,0.4)); +#23893 = DIRECTION('',(1.,0.,0.)); +#23894 = DIRECTION('',(0.,0.,-1.)); +#23895 = ADVANCED_FACE('',(#23896),#23904,.F.); +#23896 = FACE_BOUND('',#23897,.F.); +#23897 = EDGE_LOOP('',(#23898,#23899,#23900,#23901,#23902,#23903)); +#23898 = ORIENTED_EDGE('',*,*,#23801,.T.); +#23899 = ORIENTED_EDGE('',*,*,#22736,.T.); +#23900 = ORIENTED_EDGE('',*,*,#23782,.T.); +#23901 = ORIENTED_EDGE('',*,*,#21690,.T.); +#23902 = ORIENTED_EDGE('',*,*,#22695,.T.); +#23903 = ORIENTED_EDGE('',*,*,#22963,.T.); +#23904 = CYLINDRICAL_SURFACE('',#23905,0.15); +#23905 = AXIS2_PLACEMENT_3D('',#23906,#23907,#23908); +#23906 = CARTESIAN_POINT('',(-2.09,0.56,1.1)); +#23907 = DIRECTION('',(1.,0.,0.)); +#23908 = DIRECTION('',(0.,0.,-1.)); +#23909 = ADVANCED_FACE('',(#23910),#23916,.F.); +#23910 = FACE_BOUND('',#23911,.F.); +#23911 = EDGE_LOOP('',(#23912,#23913,#23914,#23915)); +#23912 = ORIENTED_EDGE('',*,*,#22711,.T.); +#23913 = ORIENTED_EDGE('',*,*,#21707,.T.); +#23914 = ORIENTED_EDGE('',*,*,#22680,.T.); +#23915 = ORIENTED_EDGE('',*,*,#22955,.T.); +#23916 = CYLINDRICAL_SURFACE('',#23917,0.15); +#23917 = AXIS2_PLACEMENT_3D('',#23918,#23919,#23920); +#23918 = CARTESIAN_POINT('',(-2.09,0.5,1.1)); +#23919 = DIRECTION('',(1.,0.,0.)); +#23920 = DIRECTION('',(0.,0.,-1.)); +#23921 = ADVANCED_FACE('',(#23922),#23933,.F.); +#23922 = FACE_BOUND('',#23923,.F.); +#23923 = EDGE_LOOP('',(#23924,#23925,#23926,#23927)); +#23924 = ORIENTED_EDGE('',*,*,#21640,.T.); +#23925 = ORIENTED_EDGE('',*,*,#22893,.T.); +#23926 = ORIENTED_EDGE('',*,*,#22995,.T.); +#23927 = ORIENTED_EDGE('',*,*,#23928,.T.); +#23928 = EDGE_CURVE('',#22996,#21632,#23929,.T.); +#23929 = LINE('',#23930,#23931); +#23930 = CARTESIAN_POINT('',(-2.24,0.35,2.4)); +#23931 = VECTOR('',#23932,1.); +#23932 = DIRECTION('',(-1.,0.,0.)); +#23933 = CYLINDRICAL_SURFACE('',#23934,0.15); +#23934 = AXIS2_PLACEMENT_3D('',#23935,#23936,#23937); +#23935 = CARTESIAN_POINT('',(-2.09,0.5,2.4)); +#23936 = DIRECTION('',(1.,0.,0.)); +#23937 = DIRECTION('',(0.,0.,-1.)); +#23938 = ADVANCED_FACE('',(#23939),#23945,.T.); +#23939 = FACE_BOUND('',#23940,.T.); +#23940 = EDGE_LOOP('',(#23941,#23942,#23943,#23944)); +#23941 = ORIENTED_EDGE('',*,*,#23004,.F.); +#23942 = ORIENTED_EDGE('',*,*,#23928,.T.); +#23943 = ORIENTED_EDGE('',*,*,#21631,.F.); +#23944 = ORIENTED_EDGE('',*,*,#22924,.F.); +#23945 = CYLINDRICAL_SURFACE('',#23946,0.15); +#23946 = AXIS2_PLACEMENT_3D('',#23947,#23948,#23949); +#23947 = CARTESIAN_POINT('',(-2.09,0.2,2.4)); +#23948 = DIRECTION('',(-1.,0.,0.)); +#23949 = DIRECTION('',(0.,0.,1.)); +#23950 = ADVANCED_FACE('',(#23951),#23959,.F.); +#23951 = FACE_BOUND('',#23952,.F.); +#23952 = EDGE_LOOP('',(#23953,#23954,#23955,#23956,#23957,#23958)); +#23953 = ORIENTED_EDGE('',*,*,#22987,.T.); +#23954 = ORIENTED_EDGE('',*,*,#22886,.T.); +#23955 = ORIENTED_EDGE('',*,*,#21657,.T.); +#23956 = ORIENTED_EDGE('',*,*,#23401,.T.); +#23957 = ORIENTED_EDGE('',*,*,#22845,.T.); +#23958 = ORIENTED_EDGE('',*,*,#23382,.T.); +#23959 = CYLINDRICAL_SURFACE('',#23960,0.15); +#23960 = AXIS2_PLACEMENT_3D('',#23961,#23962,#23963); +#23961 = CARTESIAN_POINT('',(-2.09,0.56,2.4)); +#23962 = DIRECTION('',(1.,0.,0.)); +#23963 = DIRECTION('',(0.,0.,-1.)); +#23964 = ADVANCED_FACE('',(#23965),#23971,.T.); +#23965 = FACE_BOUND('',#23966,.T.); +#23966 = EDGE_LOOP('',(#23967,#23968,#23969,#23970)); +#23967 = ORIENTED_EDGE('',*,*,#22939,.F.); +#23968 = ORIENTED_EDGE('',*,*,#22602,.F.); +#23969 = ORIENTED_EDGE('',*,*,#21741,.F.); +#23970 = ORIENTED_EDGE('',*,*,#22642,.F.); +#23971 = CYLINDRICAL_SURFACE('',#23972,0.3); +#23972 = AXIS2_PLACEMENT_3D('',#23973,#23974,#23975); +#23973 = CARTESIAN_POINT('',(-2.09,-5.E-02,-0.15)); +#23974 = DIRECTION('',(-1.,0.,0.)); +#23975 = DIRECTION('',(0.,0.,1.)); +#23976 = ADVANCED_FACE('',(#23977),#23983,.T.); +#23977 = FACE_BOUND('',#23978,.T.); +#23978 = EDGE_LOOP('',(#23979,#23980,#23981,#23982)); +#23979 = ORIENTED_EDGE('',*,*,#22947,.F.); +#23980 = ORIENTED_EDGE('',*,*,#22649,.F.); +#23981 = ORIENTED_EDGE('',*,*,#21724,.F.); +#23982 = ORIENTED_EDGE('',*,*,#22673,.F.); +#23983 = CYLINDRICAL_SURFACE('',#23984,0.3); +#23984 = AXIS2_PLACEMENT_3D('',#23985,#23986,#23987); +#23985 = CARTESIAN_POINT('',(-2.09,5.E-02,-0.15)); +#23986 = DIRECTION('',(-1.,0.,0.)); +#23987 = DIRECTION('',(0.,0.,1.)); +#23988 = ADVANCED_FACE('',(#23989),#24014,.F.); +#23989 = FACE_BOUND('',#23990,.T.); +#23990 = EDGE_LOOP('',(#23991,#24001,#24007,#24008)); +#23991 = ORIENTED_EDGE('',*,*,#23992,.F.); +#23992 = EDGE_CURVE('',#23993,#23995,#23997,.T.); +#23993 = VERTEX_POINT('',#23994); +#23994 = CARTESIAN_POINT('',(2.09,-0.9,2.55)); +#23995 = VERTEX_POINT('',#23996); +#23996 = CARTESIAN_POINT('',(2.09,0.2,2.55)); +#23997 = LINE('',#23998,#23999); +#23998 = CARTESIAN_POINT('',(2.09,-1.05,2.55)); +#23999 = VECTOR('',#24000,1.); +#24000 = DIRECTION('',(0.,1.,0.)); +#24001 = ORIENTED_EDGE('',*,*,#24002,.T.); +#24002 = EDGE_CURVE('',#23993,#19674,#24003,.T.); +#24003 = LINE('',#24004,#24005); +#24004 = CARTESIAN_POINT('',(2.09,-0.9,2.55)); +#24005 = VECTOR('',#24006,1.); +#24006 = DIRECTION('',(1.,0.,0.)); +#24007 = ORIENTED_EDGE('',*,*,#19673,.T.); +#24008 = ORIENTED_EDGE('',*,*,#24009,.T.); +#24009 = EDGE_CURVE('',#19676,#23995,#24010,.T.); +#24010 = LINE('',#24011,#24012); +#24011 = CARTESIAN_POINT('',(2.09,0.2,2.55)); +#24012 = VECTOR('',#24013,1.); +#24013 = DIRECTION('',(-1.,-0.,-0.)); +#24014 = PLANE('',#24015); +#24015 = AXIS2_PLACEMENT_3D('',#24016,#24017,#24018); +#24016 = CARTESIAN_POINT('',(2.09,-1.05,2.55)); +#24017 = DIRECTION('',(0.,0.,-1.)); +#24018 = DIRECTION('',(-1.,0.,-0.)); +#24019 = ADVANCED_FACE('',(#24020),#24045,.F.); +#24020 = FACE_BOUND('',#24021,.T.); +#24021 = EDGE_LOOP('',(#24022,#24023,#24031,#24039)); +#24022 = ORIENTED_EDGE('',*,*,#19825,.T.); +#24023 = ORIENTED_EDGE('',*,*,#24024,.T.); +#24024 = EDGE_CURVE('',#19817,#24025,#24027,.T.); +#24025 = VERTEX_POINT('',#24026); +#24026 = CARTESIAN_POINT('',(2.09,0.56,2.25)); +#24027 = LINE('',#24028,#24029); +#24028 = CARTESIAN_POINT('',(2.09,0.56,2.25)); +#24029 = VECTOR('',#24030,1.); +#24030 = DIRECTION('',(-1.,-0.,-0.)); +#24031 = ORIENTED_EDGE('',*,*,#24032,.F.); +#24032 = EDGE_CURVE('',#24033,#24025,#24035,.T.); +#24033 = VERTEX_POINT('',#24034); +#24034 = CARTESIAN_POINT('',(2.09,0.5,2.25)); +#24035 = LINE('',#24036,#24037); +#24036 = CARTESIAN_POINT('',(2.09,0.35,2.25)); +#24037 = VECTOR('',#24038,1.); +#24038 = DIRECTION('',(0.,1.,0.)); +#24039 = ORIENTED_EDGE('',*,*,#24040,.T.); +#24040 = EDGE_CURVE('',#24033,#19826,#24041,.T.); +#24041 = LINE('',#24042,#24043); +#24042 = CARTESIAN_POINT('',(2.24,0.5,2.25)); +#24043 = VECTOR('',#24044,1.); +#24044 = DIRECTION('',(1.,0.,0.)); +#24045 = PLANE('',#24046); +#24046 = AXIS2_PLACEMENT_3D('',#24047,#24048,#24049); +#24047 = CARTESIAN_POINT('',(2.09,0.35,2.25)); +#24048 = DIRECTION('',(0.,0.,-1.)); +#24049 = DIRECTION('',(-1.,0.,-0.)); +#24050 = ADVANCED_FACE('',(#24051),#24087,.F.); +#24051 = FACE_BOUND('',#24052,.T.); +#24052 = EDGE_LOOP('',(#24053,#24064,#24072,#24081)); +#24053 = ORIENTED_EDGE('',*,*,#24054,.F.); +#24054 = EDGE_CURVE('',#24055,#24057,#24059,.T.); +#24055 = VERTEX_POINT('',#24056); +#24056 = CARTESIAN_POINT('',(2.089554180487,0.71,2.4)); +#24057 = VERTEX_POINT('',#24058); +#24058 = CARTESIAN_POINT('',(2.079574561329,0.71,2.425909707305)); +#24059 = CIRCLE('',#24060,5.764753397594E-02); +#24060 = AXIS2_PLACEMENT_3D('',#24061,#24062,#24063); +#24061 = CARTESIAN_POINT('',(2.032352466024,0.71,2.392844440202)); +#24062 = DIRECTION('',(-0.,-1.,0.)); +#24063 = DIRECTION('',(1.,-0.,0.)); +#24064 = ORIENTED_EDGE('',*,*,#24065,.T.); +#24065 = EDGE_CURVE('',#24055,#24066,#24068,.T.); +#24066 = VERTEX_POINT('',#24067); +#24067 = CARTESIAN_POINT('',(2.239876672637,0.71,2.4)); +#24068 = LINE('',#24069,#24070); +#24069 = CARTESIAN_POINT('',(2.24,0.71,2.4)); +#24070 = VECTOR('',#24071,1.); +#24071 = DIRECTION('',(1.,-0.,0.)); +#24072 = ORIENTED_EDGE('',*,*,#24073,.T.); +#24073 = EDGE_CURVE('',#24066,#24074,#24076,.T.); +#24074 = VERTEX_POINT('',#24075); +#24075 = CARTESIAN_POINT('',(2.202447367972,0.71,2.511946172757)); +#24076 = CIRCLE('',#24077,0.207647533976); +#24077 = AXIS2_PLACEMENT_3D('',#24078,#24079,#24080); +#24078 = CARTESIAN_POINT('',(2.032352466024,0.71,2.392844440202)); +#24079 = DIRECTION('',(-0.,-1.,0.)); +#24080 = DIRECTION('',(1.,-0.,0.)); +#24081 = ORIENTED_EDGE('',*,*,#24082,.F.); +#24082 = EDGE_CURVE('',#24057,#24074,#24083,.T.); +#24083 = LINE('',#24084,#24085); +#24084 = CARTESIAN_POINT('',(2.079574561329,0.71,2.425909707305)); +#24085 = VECTOR('',#24086,1.); +#24086 = DIRECTION('',(0.819152044289,-0.,0.573576436351)); +#24087 = PLANE('',#24088); +#24088 = AXIS2_PLACEMENT_3D('',#24089,#24090,#24091); +#24089 = CARTESIAN_POINT('',(2.09,0.71,2.25)); +#24090 = DIRECTION('',(0.,1.,0.)); +#24091 = DIRECTION('',(0.,-0.,1.)); +#24092 = ADVANCED_FACE('',(#24093),#24154,.F.); +#24093 = FACE_BOUND('',#24094,.T.); +#24094 = EDGE_LOOP('',(#24095,#24096,#24105,#24113,#24122,#24130,#24139, + #24147)); +#24095 = ORIENTED_EDGE('',*,*,#19800,.T.); +#24096 = ORIENTED_EDGE('',*,*,#24097,.T.); +#24097 = EDGE_CURVE('',#19793,#24098,#24100,.T.); +#24098 = VERTEX_POINT('',#24099); +#24099 = CARTESIAN_POINT('',(2.202447367972,1.31,0.988053827243)); +#24100 = CIRCLE('',#24101,0.207647533976); +#24101 = AXIS2_PLACEMENT_3D('',#24102,#24103,#24104); +#24102 = CARTESIAN_POINT('',(2.032352466024,1.31,1.107155559798)); +#24103 = DIRECTION('',(-0.,1.,0.)); +#24104 = DIRECTION('',(1.,0.,0.)); +#24105 = ORIENTED_EDGE('',*,*,#24106,.F.); +#24106 = EDGE_CURVE('',#24107,#24098,#24109,.T.); +#24107 = VERTEX_POINT('',#24108); +#24108 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#24109 = LINE('',#24110,#24111); +#24110 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#24111 = VECTOR('',#24112,1.); +#24112 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#24113 = ORIENTED_EDGE('',*,*,#24114,.F.); +#24114 = EDGE_CURVE('',#24115,#24107,#24117,.T.); +#24115 = VERTEX_POINT('',#24116); +#24116 = CARTESIAN_POINT('',(2.09,1.31,1.107155559798)); +#24117 = CIRCLE('',#24118,5.764753397594E-02); +#24118 = AXIS2_PLACEMENT_3D('',#24119,#24120,#24121); +#24119 = CARTESIAN_POINT('',(2.032352466024,1.31,1.107155559798)); +#24120 = DIRECTION('',(-0.,1.,0.)); +#24121 = DIRECTION('',(1.,0.,0.)); +#24122 = ORIENTED_EDGE('',*,*,#24123,.F.); +#24123 = EDGE_CURVE('',#24124,#24115,#24126,.T.); +#24124 = VERTEX_POINT('',#24125); +#24125 = CARTESIAN_POINT('',(2.09,1.31,2.392844440202)); +#24126 = LINE('',#24127,#24128); +#24127 = CARTESIAN_POINT('',(2.09,1.31,2.392844440202)); +#24128 = VECTOR('',#24129,1.); +#24129 = DIRECTION('',(-0.,-1.686570038849E-16,-1.)); +#24130 = ORIENTED_EDGE('',*,*,#24131,.T.); +#24131 = EDGE_CURVE('',#24124,#24132,#24134,.T.); +#24132 = VERTEX_POINT('',#24133); +#24133 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24134 = CIRCLE('',#24135,5.764753397594E-02); +#24135 = AXIS2_PLACEMENT_3D('',#24136,#24137,#24138); +#24136 = CARTESIAN_POINT('',(2.032352466024,1.31,2.392844440202)); +#24137 = DIRECTION('',(-0.,-1.,0.)); +#24138 = DIRECTION('',(1.,-0.,0.)); +#24139 = ORIENTED_EDGE('',*,*,#24140,.F.); +#24140 = EDGE_CURVE('',#24141,#24132,#24143,.T.); +#24141 = VERTEX_POINT('',#24142); +#24142 = CARTESIAN_POINT('',(2.202447367972,1.31,2.511946172757)); +#24143 = LINE('',#24144,#24145); +#24144 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24145 = VECTOR('',#24146,1.); +#24146 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24147 = ORIENTED_EDGE('',*,*,#24148,.F.); +#24148 = EDGE_CURVE('',#19801,#24141,#24149,.T.); +#24149 = CIRCLE('',#24150,0.207647533976); +#24150 = AXIS2_PLACEMENT_3D('',#24151,#24152,#24153); +#24151 = CARTESIAN_POINT('',(2.032352466024,1.31,2.392844440202)); +#24152 = DIRECTION('',(-0.,-1.,0.)); +#24153 = DIRECTION('',(1.,-0.,0.)); +#24154 = PLANE('',#24155); +#24155 = AXIS2_PLACEMENT_3D('',#24156,#24157,#24158); +#24156 = CARTESIAN_POINT('',(2.09,1.31,2.392844440202)); +#24157 = DIRECTION('',(0.,-1.,1.686570038849E-16)); +#24158 = DIRECTION('',(0.,-1.686570038849E-16,-1.)); +#24159 = ADVANCED_FACE('',(#24160),#24196,.F.); +#24160 = FACE_BOUND('',#24161,.T.); +#24161 = EDGE_LOOP('',(#24162,#24173,#24181,#24190)); +#24162 = ORIENTED_EDGE('',*,*,#24163,.F.); +#24163 = EDGE_CURVE('',#24164,#24166,#24168,.T.); +#24164 = VERTEX_POINT('',#24165); +#24165 = CARTESIAN_POINT('',(2.239876672637,0.71,1.1)); +#24166 = VERTEX_POINT('',#24167); +#24167 = CARTESIAN_POINT('',(2.202447367972,0.71,0.988053827243)); +#24168 = CIRCLE('',#24169,0.207647533976); +#24169 = AXIS2_PLACEMENT_3D('',#24170,#24171,#24172); +#24170 = CARTESIAN_POINT('',(2.032352466024,0.71,1.107155559798)); +#24171 = DIRECTION('',(-0.,1.,0.)); +#24172 = DIRECTION('',(1.,0.,0.)); +#24173 = ORIENTED_EDGE('',*,*,#24174,.T.); +#24174 = EDGE_CURVE('',#24164,#24175,#24177,.T.); +#24175 = VERTEX_POINT('',#24176); +#24176 = CARTESIAN_POINT('',(2.089554180487,0.71,1.1)); +#24177 = LINE('',#24178,#24179); +#24178 = CARTESIAN_POINT('',(2.09,0.71,1.1)); +#24179 = VECTOR('',#24180,1.); +#24180 = DIRECTION('',(-1.,0.,-0.)); +#24181 = ORIENTED_EDGE('',*,*,#24182,.T.); +#24182 = EDGE_CURVE('',#24175,#24183,#24185,.T.); +#24183 = VERTEX_POINT('',#24184); +#24184 = CARTESIAN_POINT('',(2.079574561329,0.71,1.074090292695)); +#24185 = CIRCLE('',#24186,5.764753397594E-02); +#24186 = AXIS2_PLACEMENT_3D('',#24187,#24188,#24189); +#24187 = CARTESIAN_POINT('',(2.032352466024,0.71,1.107155559798)); +#24188 = DIRECTION('',(-0.,1.,0.)); +#24189 = DIRECTION('',(1.,0.,0.)); +#24190 = ORIENTED_EDGE('',*,*,#24191,.F.); +#24191 = EDGE_CURVE('',#24166,#24183,#24192,.T.); +#24192 = LINE('',#24193,#24194); +#24193 = CARTESIAN_POINT('',(2.079574561329,0.71,1.074090292695)); +#24194 = VECTOR('',#24195,1.); +#24195 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#24196 = PLANE('',#24197); +#24197 = AXIS2_PLACEMENT_3D('',#24198,#24199,#24200); +#24198 = CARTESIAN_POINT('',(2.09,0.71,1.107155559798)); +#24199 = DIRECTION('',(0.,1.,0.)); +#24200 = DIRECTION('',(0.,-0.,1.)); +#24201 = ADVANCED_FACE('',(#24202),#24227,.F.); +#24202 = FACE_BOUND('',#24203,.T.); +#24203 = EDGE_LOOP('',(#24204,#24214,#24220,#24221)); +#24204 = ORIENTED_EDGE('',*,*,#24205,.F.); +#24205 = EDGE_CURVE('',#24206,#24208,#24210,.T.); +#24206 = VERTEX_POINT('',#24207); +#24207 = CARTESIAN_POINT('',(2.09,0.56,1.25)); +#24208 = VERTEX_POINT('',#24209); +#24209 = CARTESIAN_POINT('',(2.09,0.5,1.25)); +#24210 = LINE('',#24211,#24212); +#24211 = CARTESIAN_POINT('',(2.09,0.71,1.25)); +#24212 = VECTOR('',#24213,1.); +#24213 = DIRECTION('',(0.,-1.,0.)); +#24214 = ORIENTED_EDGE('',*,*,#24215,.T.); +#24215 = EDGE_CURVE('',#24206,#19776,#24216,.T.); +#24216 = LINE('',#24217,#24218); +#24217 = CARTESIAN_POINT('',(2.24,0.56,1.25)); +#24218 = VECTOR('',#24219,1.); +#24219 = DIRECTION('',(1.,-0.,0.)); +#24220 = ORIENTED_EDGE('',*,*,#19775,.T.); +#24221 = ORIENTED_EDGE('',*,*,#24222,.T.); +#24222 = EDGE_CURVE('',#19767,#24208,#24223,.T.); +#24223 = LINE('',#24224,#24225); +#24224 = CARTESIAN_POINT('',(2.09,0.5,1.25)); +#24225 = VECTOR('',#24226,1.); +#24226 = DIRECTION('',(-1.,0.,-0.)); +#24227 = PLANE('',#24228); +#24228 = AXIS2_PLACEMENT_3D('',#24229,#24230,#24231); +#24229 = CARTESIAN_POINT('',(2.09,0.71,1.25)); +#24230 = DIRECTION('',(-0.,0.,1.)); +#24231 = DIRECTION('',(1.,0.,0.)); +#24232 = ADVANCED_FACE('',(#24233),#24258,.F.); +#24233 = FACE_BOUND('',#24234,.T.); +#24234 = EDGE_LOOP('',(#24235,#24236,#24244,#24252)); +#24235 = ORIENTED_EDGE('',*,*,#19758,.T.); +#24236 = ORIENTED_EDGE('',*,*,#24237,.T.); +#24237 = EDGE_CURVE('',#19750,#24238,#24240,.T.); +#24238 = VERTEX_POINT('',#24239); +#24239 = CARTESIAN_POINT('',(2.09,0.35,-0.15)); +#24240 = LINE('',#24241,#24242); +#24241 = CARTESIAN_POINT('',(2.09,0.35,-0.15)); +#24242 = VECTOR('',#24243,1.); +#24243 = DIRECTION('',(-1.,-0.,-0.)); +#24244 = ORIENTED_EDGE('',*,*,#24245,.F.); +#24245 = EDGE_CURVE('',#24246,#24238,#24248,.T.); +#24246 = VERTEX_POINT('',#24247); +#24247 = CARTESIAN_POINT('',(2.09,0.35,1.1)); +#24248 = LINE('',#24249,#24250); +#24249 = CARTESIAN_POINT('',(2.09,0.35,1.25)); +#24250 = VECTOR('',#24251,1.); +#24251 = DIRECTION('',(-0.,-1.27553196763E-16,-1.)); +#24252 = ORIENTED_EDGE('',*,*,#24253,.T.); +#24253 = EDGE_CURVE('',#24246,#19759,#24254,.T.); +#24254 = LINE('',#24255,#24256); +#24255 = CARTESIAN_POINT('',(2.24,0.35,1.1)); +#24256 = VECTOR('',#24257,1.); +#24257 = DIRECTION('',(1.,0.,-0.)); +#24258 = PLANE('',#24259); +#24259 = AXIS2_PLACEMENT_3D('',#24260,#24261,#24262); +#24260 = CARTESIAN_POINT('',(2.09,0.35,1.25)); +#24261 = DIRECTION('',(0.,-1.,1.27553196763E-16)); +#24262 = DIRECTION('',(0.,-1.27553196763E-16,-1.)); +#24263 = ADVANCED_FACE('',(#24264),#24289,.F.); +#24264 = FACE_BOUND('',#24265,.T.); +#24265 = EDGE_LOOP('',(#24266,#24267,#24275,#24283)); +#24266 = ORIENTED_EDGE('',*,*,#19741,.T.); +#24267 = ORIENTED_EDGE('',*,*,#24268,.T.); +#24268 = EDGE_CURVE('',#19733,#24269,#24271,.T.); +#24269 = VERTEX_POINT('',#24270); +#24270 = CARTESIAN_POINT('',(2.09,-5.E-02,-0.45)); +#24271 = LINE('',#24272,#24273); +#24272 = CARTESIAN_POINT('',(2.09,-5.E-02,-0.45)); +#24273 = VECTOR('',#24274,1.); +#24274 = DIRECTION('',(-1.,-0.,-0.)); +#24275 = ORIENTED_EDGE('',*,*,#24276,.F.); +#24276 = EDGE_CURVE('',#24277,#24269,#24279,.T.); +#24277 = VERTEX_POINT('',#24278); +#24278 = CARTESIAN_POINT('',(2.09,5.E-02,-0.45)); +#24279 = LINE('',#24280,#24281); +#24280 = CARTESIAN_POINT('',(2.09,0.35,-0.45)); +#24281 = VECTOR('',#24282,1.); +#24282 = DIRECTION('',(0.,-1.,0.)); +#24283 = ORIENTED_EDGE('',*,*,#24284,.T.); +#24284 = EDGE_CURVE('',#24277,#19742,#24285,.T.); +#24285 = LINE('',#24286,#24287); +#24286 = CARTESIAN_POINT('',(2.09,5.E-02,-0.45)); +#24287 = VECTOR('',#24288,1.); +#24288 = DIRECTION('',(1.,0.,0.)); +#24289 = PLANE('',#24290); +#24290 = AXIS2_PLACEMENT_3D('',#24291,#24292,#24293); +#24291 = CARTESIAN_POINT('',(2.09,0.35,-0.45)); +#24292 = DIRECTION('',(-0.,0.,1.)); +#24293 = DIRECTION('',(1.,0.,0.)); +#24294 = ADVANCED_FACE('',(#24295),#24320,.F.); +#24295 = FACE_BOUND('',#24296,.T.); +#24296 = EDGE_LOOP('',(#24297,#24307,#24313,#24314)); +#24297 = ORIENTED_EDGE('',*,*,#24298,.F.); +#24298 = EDGE_CURVE('',#24299,#24301,#24303,.T.); +#24299 = VERTEX_POINT('',#24300); +#24300 = CARTESIAN_POINT('',(2.09,-0.35,-0.15)); +#24301 = VERTEX_POINT('',#24302); +#24302 = CARTESIAN_POINT('',(2.09,-0.35,0.8)); +#24303 = LINE('',#24304,#24305); +#24304 = CARTESIAN_POINT('',(2.09,-0.35,-0.45)); +#24305 = VECTOR('',#24306,1.); +#24306 = DIRECTION('',(0.,-1.161645184806E-16,1.)); +#24307 = ORIENTED_EDGE('',*,*,#24308,.T.); +#24308 = EDGE_CURVE('',#24299,#19725,#24309,.T.); +#24309 = LINE('',#24310,#24311); +#24310 = CARTESIAN_POINT('',(2.09,-0.35,-0.15)); +#24311 = VECTOR('',#24312,1.); +#24312 = DIRECTION('',(1.,0.,0.)); +#24313 = ORIENTED_EDGE('',*,*,#19724,.T.); +#24314 = ORIENTED_EDGE('',*,*,#24315,.T.); +#24315 = EDGE_CURVE('',#19716,#24301,#24316,.T.); +#24316 = LINE('',#24317,#24318); +#24317 = CARTESIAN_POINT('',(2.09,-0.35,0.8)); +#24318 = VECTOR('',#24319,1.); +#24319 = DIRECTION('',(-1.,-0.,-0.)); +#24320 = PLANE('',#24321); +#24321 = AXIS2_PLACEMENT_3D('',#24322,#24323,#24324); +#24322 = CARTESIAN_POINT('',(2.09,-0.35,-0.45)); +#24323 = DIRECTION('',(-0.,1.,1.161645184806E-16)); +#24324 = DIRECTION('',(0.,-1.161645184806E-16,1.)); +#24325 = ADVANCED_FACE('',(#24326),#24351,.F.); +#24326 = FACE_BOUND('',#24327,.T.); +#24327 = EDGE_LOOP('',(#24328,#24329,#24337,#24345)); +#24328 = ORIENTED_EDGE('',*,*,#19707,.T.); +#24329 = ORIENTED_EDGE('',*,*,#24330,.T.); +#24330 = EDGE_CURVE('',#19700,#24331,#24333,.T.); +#24331 = VERTEX_POINT('',#24332); +#24332 = CARTESIAN_POINT('',(2.09,-0.9,0.95)); +#24333 = LINE('',#24334,#24335); +#24334 = CARTESIAN_POINT('',(2.09,-0.9,0.95)); +#24335 = VECTOR('',#24336,1.); +#24336 = DIRECTION('',(-1.,-0.,-0.)); +#24337 = ORIENTED_EDGE('',*,*,#24338,.F.); +#24338 = EDGE_CURVE('',#24339,#24331,#24341,.T.); +#24339 = VERTEX_POINT('',#24340); +#24340 = CARTESIAN_POINT('',(2.09,-0.5,0.95)); +#24341 = LINE('',#24342,#24343); +#24342 = CARTESIAN_POINT('',(2.09,-0.35,0.95)); +#24343 = VECTOR('',#24344,1.); +#24344 = DIRECTION('',(0.,-1.,0.)); +#24345 = ORIENTED_EDGE('',*,*,#24346,.T.); +#24346 = EDGE_CURVE('',#24339,#19708,#24347,.T.); +#24347 = LINE('',#24348,#24349); +#24348 = CARTESIAN_POINT('',(2.24,-0.5,0.95)); +#24349 = VECTOR('',#24350,1.); +#24350 = DIRECTION('',(1.,-0.,0.)); +#24351 = PLANE('',#24352); +#24352 = AXIS2_PLACEMENT_3D('',#24353,#24354,#24355); +#24353 = CARTESIAN_POINT('',(2.09,-0.35,0.95)); +#24354 = DIRECTION('',(-0.,0.,1.)); +#24355 = DIRECTION('',(1.,0.,0.)); +#24356 = ADVANCED_FACE('',(#24357),#24456,.F.); +#24357 = FACE_BOUND('',#24358,.T.); +#24358 = EDGE_LOOP('',(#24359,#24360,#24367,#24368,#24375,#24376,#24383, + #24384,#24391,#24392,#24401,#24408,#24409,#24418,#24424,#24425, + #24433,#24440,#24441,#24448,#24449)); +#24359 = ORIENTED_EDGE('',*,*,#24276,.T.); +#24360 = ORIENTED_EDGE('',*,*,#24361,.T.); +#24361 = EDGE_CURVE('',#24269,#24299,#24362,.T.); +#24362 = CIRCLE('',#24363,0.3); +#24363 = AXIS2_PLACEMENT_3D('',#24364,#24365,#24366); +#24364 = CARTESIAN_POINT('',(2.09,-5.E-02,-0.15)); +#24365 = DIRECTION('',(-1.,-0.,-0.)); +#24366 = DIRECTION('',(0.,0.,-1.)); +#24367 = ORIENTED_EDGE('',*,*,#24298,.T.); +#24368 = ORIENTED_EDGE('',*,*,#24369,.T.); +#24369 = EDGE_CURVE('',#24301,#24339,#24370,.T.); +#24370 = CIRCLE('',#24371,0.15); +#24371 = AXIS2_PLACEMENT_3D('',#24372,#24373,#24374); +#24372 = CARTESIAN_POINT('',(2.09,-0.5,0.8)); +#24373 = DIRECTION('',(1.,0.,0.)); +#24374 = DIRECTION('',(0.,0.,-1.)); +#24375 = ORIENTED_EDGE('',*,*,#24338,.T.); +#24376 = ORIENTED_EDGE('',*,*,#24377,.T.); +#24377 = EDGE_CURVE('',#24331,#20853,#24378,.T.); +#24378 = CIRCLE('',#24379,0.15); +#24379 = AXIS2_PLACEMENT_3D('',#24380,#24381,#24382); +#24380 = CARTESIAN_POINT('',(2.09,-0.9,0.8)); +#24381 = DIRECTION('',(1.,0.,0.)); +#24382 = DIRECTION('',(0.,0.,-1.)); +#24383 = ORIENTED_EDGE('',*,*,#20852,.T.); +#24384 = ORIENTED_EDGE('',*,*,#24385,.T.); +#24385 = EDGE_CURVE('',#20855,#23993,#24386,.T.); +#24386 = CIRCLE('',#24387,0.15); +#24387 = AXIS2_PLACEMENT_3D('',#24388,#24389,#24390); +#24388 = CARTESIAN_POINT('',(2.09,-0.9,2.7)); +#24389 = DIRECTION('',(1.,0.,0.)); +#24390 = DIRECTION('',(0.,0.,-1.)); +#24391 = ORIENTED_EDGE('',*,*,#23992,.T.); +#24392 = ORIENTED_EDGE('',*,*,#24393,.T.); +#24393 = EDGE_CURVE('',#23995,#24394,#24396,.T.); +#24394 = VERTEX_POINT('',#24395); +#24395 = CARTESIAN_POINT('',(2.09,0.35,2.4)); +#24396 = CIRCLE('',#24397,0.15); +#24397 = AXIS2_PLACEMENT_3D('',#24398,#24399,#24400); +#24398 = CARTESIAN_POINT('',(2.09,0.2,2.4)); +#24399 = DIRECTION('',(-1.,-0.,-0.)); +#24400 = DIRECTION('',(0.,0.,-1.)); +#24401 = ORIENTED_EDGE('',*,*,#24402,.T.); +#24402 = EDGE_CURVE('',#24394,#24033,#24403,.T.); +#24403 = CIRCLE('',#24404,0.15); +#24404 = AXIS2_PLACEMENT_3D('',#24405,#24406,#24407); +#24405 = CARTESIAN_POINT('',(2.09,0.5,2.4)); +#24406 = DIRECTION('',(1.,0.,0.)); +#24407 = DIRECTION('',(0.,0.,-1.)); +#24408 = ORIENTED_EDGE('',*,*,#24032,.T.); +#24409 = ORIENTED_EDGE('',*,*,#24410,.T.); +#24410 = EDGE_CURVE('',#24025,#24411,#24413,.T.); +#24411 = VERTEX_POINT('',#24412); +#24412 = CARTESIAN_POINT('',(2.09,0.709829229338,2.392844440202)); +#24413 = CIRCLE('',#24414,0.15); +#24414 = AXIS2_PLACEMENT_3D('',#24415,#24416,#24417); +#24415 = CARTESIAN_POINT('',(2.09,0.56,2.4)); +#24416 = DIRECTION('',(1.,0.,0.)); +#24417 = DIRECTION('',(0.,0.,-1.)); +#24418 = ORIENTED_EDGE('',*,*,#24419,.T.); +#24419 = EDGE_CURVE('',#24411,#24124,#24420,.T.); +#24420 = LINE('',#24421,#24422); +#24421 = CARTESIAN_POINT('',(2.09,0.71,2.392844440202)); +#24422 = VECTOR('',#24423,1.); +#24423 = DIRECTION('',(0.,1.,0.)); +#24424 = ORIENTED_EDGE('',*,*,#24123,.T.); +#24425 = ORIENTED_EDGE('',*,*,#24426,.T.); +#24426 = EDGE_CURVE('',#24115,#24427,#24429,.T.); +#24427 = VERTEX_POINT('',#24428); +#24428 = CARTESIAN_POINT('',(2.09,0.709829229338,1.107155559798)); +#24429 = LINE('',#24430,#24431); +#24430 = CARTESIAN_POINT('',(2.09,1.31,1.107155559798)); +#24431 = VECTOR('',#24432,1.); +#24432 = DIRECTION('',(0.,-1.,0.)); +#24433 = ORIENTED_EDGE('',*,*,#24434,.T.); +#24434 = EDGE_CURVE('',#24427,#24206,#24435,.T.); +#24435 = CIRCLE('',#24436,0.15); +#24436 = AXIS2_PLACEMENT_3D('',#24437,#24438,#24439); +#24437 = CARTESIAN_POINT('',(2.09,0.56,1.1)); +#24438 = DIRECTION('',(1.,0.,0.)); +#24439 = DIRECTION('',(0.,0.,-1.)); +#24440 = ORIENTED_EDGE('',*,*,#24205,.T.); +#24441 = ORIENTED_EDGE('',*,*,#24442,.T.); +#24442 = EDGE_CURVE('',#24208,#24246,#24443,.T.); +#24443 = CIRCLE('',#24444,0.15); +#24444 = AXIS2_PLACEMENT_3D('',#24445,#24446,#24447); +#24445 = CARTESIAN_POINT('',(2.09,0.5,1.1)); +#24446 = DIRECTION('',(1.,0.,0.)); +#24447 = DIRECTION('',(0.,0.,-1.)); +#24448 = ORIENTED_EDGE('',*,*,#24245,.T.); +#24449 = ORIENTED_EDGE('',*,*,#24450,.T.); +#24450 = EDGE_CURVE('',#24238,#24277,#24451,.T.); +#24451 = CIRCLE('',#24452,0.3); +#24452 = AXIS2_PLACEMENT_3D('',#24453,#24454,#24455); +#24453 = CARTESIAN_POINT('',(2.09,5.E-02,-0.15)); +#24454 = DIRECTION('',(-1.,-0.,-0.)); +#24455 = DIRECTION('',(0.,0.,-1.)); +#24456 = PLANE('',#24457); +#24457 = AXIS2_PLACEMENT_3D('',#24458,#24459,#24460); +#24458 = CARTESIAN_POINT('',(2.09,0.,0.)); +#24459 = DIRECTION('',(1.,0.,-0.)); +#24460 = DIRECTION('',(0.,0.,1.)); +#24461 = ADVANCED_FACE('',(#24462),#24496,.T.); +#24462 = FACE_BOUND('',#24463,.T.); +#24463 = EDGE_LOOP('',(#24464,#24474,#24482,#24490)); +#24464 = ORIENTED_EDGE('',*,*,#24465,.T.); +#24465 = EDGE_CURVE('',#24466,#24468,#24470,.T.); +#24466 = VERTEX_POINT('',#24467); +#24467 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24468 = VERTEX_POINT('',#24469); +#24469 = CARTESIAN_POINT('',(1.775,1.31,3.1)); +#24470 = LINE('',#24471,#24472); +#24471 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24472 = VECTOR('',#24473,1.); +#24473 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24474 = ORIENTED_EDGE('',*,*,#24475,.T.); +#24475 = EDGE_CURVE('',#24468,#24476,#24478,.T.); +#24476 = VERTEX_POINT('',#24477); +#24477 = CARTESIAN_POINT('',(1.925,1.31,3.1)); +#24478 = LINE('',#24479,#24480); +#24479 = CARTESIAN_POINT('',(1.925,1.31,3.1)); +#24480 = VECTOR('',#24481,1.); +#24481 = DIRECTION('',(1.,0.,-0.)); +#24482 = ORIENTED_EDGE('',*,*,#24483,.F.); +#24483 = EDGE_CURVE('',#24484,#24476,#24486,.T.); +#24484 = VERTEX_POINT('',#24485); +#24485 = CARTESIAN_POINT('',(1.925,1.31,2.936601758237)); +#24486 = LINE('',#24487,#24488); +#24487 = CARTESIAN_POINT('',(1.925,1.31,2.936601758237)); +#24488 = VECTOR('',#24489,1.); +#24489 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24490 = ORIENTED_EDGE('',*,*,#24491,.T.); +#24491 = EDGE_CURVE('',#24484,#24466,#24492,.T.); +#24492 = LINE('',#24493,#24494); +#24493 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24494 = VECTOR('',#24495,1.); +#24495 = DIRECTION('',(-1.,-0.,-0.)); +#24496 = PLANE('',#24497); +#24497 = AXIS2_PLACEMENT_3D('',#24498,#24499,#24500); +#24498 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24499 = DIRECTION('',(-0.,1.,0.)); +#24500 = DIRECTION('',(0.,0.,1.)); +#24501 = ADVANCED_FACE('',(#24502),#24545,.T.); +#24502 = FACE_BOUND('',#24503,.T.); +#24503 = EDGE_LOOP('',(#24504,#24505,#24514,#24522,#24531,#24539)); +#24504 = ORIENTED_EDGE('',*,*,#24483,.T.); +#24505 = ORIENTED_EDGE('',*,*,#24506,.T.); +#24506 = EDGE_CURVE('',#24476,#24507,#24509,.T.); +#24507 = VERTEX_POINT('',#24508); +#24508 = CARTESIAN_POINT('',(1.925,1.16,3.25)); +#24509 = CIRCLE('',#24510,0.15); +#24510 = AXIS2_PLACEMENT_3D('',#24511,#24512,#24513); +#24511 = CARTESIAN_POINT('',(1.925,1.16,3.1)); +#24512 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#24513 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#24514 = ORIENTED_EDGE('',*,*,#24515,.F.); +#24515 = EDGE_CURVE('',#24516,#24507,#24518,.T.); +#24516 = VERTEX_POINT('',#24517); +#24517 = CARTESIAN_POINT('',(1.925,0.86,3.25)); +#24518 = LINE('',#24519,#24520); +#24519 = CARTESIAN_POINT('',(1.925,1.31,3.25)); +#24520 = VECTOR('',#24521,1.); +#24521 = DIRECTION('',(-0.,1.,-0.)); +#24522 = ORIENTED_EDGE('',*,*,#24523,.T.); +#24523 = EDGE_CURVE('',#24516,#24524,#24526,.T.); +#24524 = VERTEX_POINT('',#24525); +#24525 = CARTESIAN_POINT('',(1.925,0.71,3.1)); +#24526 = CIRCLE('',#24527,0.15); +#24527 = AXIS2_PLACEMENT_3D('',#24528,#24529,#24530); +#24528 = CARTESIAN_POINT('',(1.925,0.86,3.1)); +#24529 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#24530 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#24531 = ORIENTED_EDGE('',*,*,#24532,.F.); +#24532 = EDGE_CURVE('',#24533,#24524,#24535,.T.); +#24533 = VERTEX_POINT('',#24534); +#24534 = CARTESIAN_POINT('',(1.925,0.71,2.936601758237)); +#24535 = LINE('',#24536,#24537); +#24536 = CARTESIAN_POINT('',(1.925,0.71,2.936601758237)); +#24537 = VECTOR('',#24538,1.); +#24538 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24539 = ORIENTED_EDGE('',*,*,#24540,.T.); +#24540 = EDGE_CURVE('',#24533,#24484,#24541,.T.); +#24541 = LINE('',#24542,#24543); +#24542 = CARTESIAN_POINT('',(1.925,1.31,2.936601758237)); +#24543 = VECTOR('',#24544,1.); +#24544 = DIRECTION('',(-0.,1.,-0.)); +#24545 = PLANE('',#24546); +#24546 = AXIS2_PLACEMENT_3D('',#24547,#24548,#24549); +#24547 = CARTESIAN_POINT('',(1.925,1.31,2.936601758237)); +#24548 = DIRECTION('',(1.,0.,-6.919006095162E-16)); +#24549 = DIRECTION('',(-6.919006095162E-16,0.,-1.)); +#24550 = ADVANCED_FACE('',(#24551),#24576,.T.); +#24551 = FACE_BOUND('',#24552,.T.); +#24552 = EDGE_LOOP('',(#24553,#24554,#24562,#24570)); +#24553 = ORIENTED_EDGE('',*,*,#24532,.T.); +#24554 = ORIENTED_EDGE('',*,*,#24555,.T.); +#24555 = EDGE_CURVE('',#24524,#24556,#24558,.T.); +#24556 = VERTEX_POINT('',#24557); +#24557 = CARTESIAN_POINT('',(1.775,0.71,3.1)); +#24558 = LINE('',#24559,#24560); +#24559 = CARTESIAN_POINT('',(1.775,0.71,3.1)); +#24560 = VECTOR('',#24561,1.); +#24561 = DIRECTION('',(-1.,-0.,-0.)); +#24562 = ORIENTED_EDGE('',*,*,#24563,.F.); +#24563 = EDGE_CURVE('',#24564,#24556,#24566,.T.); +#24564 = VERTEX_POINT('',#24565); +#24565 = CARTESIAN_POINT('',(1.775,0.71,2.936601758237)); +#24566 = LINE('',#24567,#24568); +#24567 = CARTESIAN_POINT('',(1.775,0.71,2.936601758237)); +#24568 = VECTOR('',#24569,1.); +#24569 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24570 = ORIENTED_EDGE('',*,*,#24571,.T.); +#24571 = EDGE_CURVE('',#24564,#24533,#24572,.T.); +#24572 = LINE('',#24573,#24574); +#24573 = CARTESIAN_POINT('',(1.775,0.71,2.936601758237)); +#24574 = VECTOR('',#24575,1.); +#24575 = DIRECTION('',(1.,-0.,-0.)); +#24576 = PLANE('',#24577); +#24577 = AXIS2_PLACEMENT_3D('',#24578,#24579,#24580); +#24578 = CARTESIAN_POINT('',(1.775,0.71,2.936601758237)); +#24579 = DIRECTION('',(0.,-1.,0.)); +#24580 = DIRECTION('',(0.,-0.,-1.)); +#24581 = ADVANCED_FACE('',(#24582),#24616,.T.); +#24582 = FACE_BOUND('',#24583,.T.); +#24583 = EDGE_LOOP('',(#24584,#24594,#24601,#24602,#24608,#24609)); +#24584 = ORIENTED_EDGE('',*,*,#24585,.F.); +#24585 = EDGE_CURVE('',#24586,#24588,#24590,.T.); +#24586 = VERTEX_POINT('',#24587); +#24587 = CARTESIAN_POINT('',(1.775,1.16,3.25)); +#24588 = VERTEX_POINT('',#24589); +#24589 = CARTESIAN_POINT('',(1.775,0.86,3.25)); +#24590 = LINE('',#24591,#24592); +#24591 = CARTESIAN_POINT('',(1.775,1.31,3.25)); +#24592 = VECTOR('',#24593,1.); +#24593 = DIRECTION('',(-0.,-1.,-0.)); +#24594 = ORIENTED_EDGE('',*,*,#24595,.T.); +#24595 = EDGE_CURVE('',#24586,#24468,#24596,.T.); +#24596 = CIRCLE('',#24597,0.15); +#24597 = AXIS2_PLACEMENT_3D('',#24598,#24599,#24600); +#24598 = CARTESIAN_POINT('',(1.775,1.16,3.1)); +#24599 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#24600 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24601 = ORIENTED_EDGE('',*,*,#24465,.F.); +#24602 = ORIENTED_EDGE('',*,*,#24603,.T.); +#24603 = EDGE_CURVE('',#24466,#24564,#24604,.T.); +#24604 = LINE('',#24605,#24606); +#24605 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24606 = VECTOR('',#24607,1.); +#24607 = DIRECTION('',(-0.,-1.,-0.)); +#24608 = ORIENTED_EDGE('',*,*,#24563,.T.); +#24609 = ORIENTED_EDGE('',*,*,#24610,.T.); +#24610 = EDGE_CURVE('',#24556,#24588,#24611,.T.); +#24611 = CIRCLE('',#24612,0.15); +#24612 = AXIS2_PLACEMENT_3D('',#24613,#24614,#24615); +#24613 = CARTESIAN_POINT('',(1.775,0.86,3.1)); +#24614 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#24615 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24616 = PLANE('',#24617); +#24617 = AXIS2_PLACEMENT_3D('',#24618,#24619,#24620); +#24618 = CARTESIAN_POINT('',(1.775,1.31,2.936601758237)); +#24619 = DIRECTION('',(-1.,-0.,6.919006095162E-16)); +#24620 = DIRECTION('',(6.919006095162E-16,0.,1.)); +#24621 = ADVANCED_FACE('',(#24622),#24649,.T.); +#24622 = FACE_BOUND('',#24623,.T.); +#24623 = EDGE_LOOP('',(#24624,#24625,#24634,#24642)); +#24624 = ORIENTED_EDGE('',*,*,#24491,.F.); +#24625 = ORIENTED_EDGE('',*,*,#24626,.F.); +#24626 = EDGE_CURVE('',#24627,#24484,#24629,.T.); +#24627 = VERTEX_POINT('',#24628); +#24628 = CARTESIAN_POINT('',(1.941300858739,1.31,2.884902039386)); +#24629 = CIRCLE('',#24630,9.013570916571E-02); +#24630 = AXIS2_PLACEMENT_3D('',#24631,#24632,#24633); +#24631 = CARTESIAN_POINT('',(2.015135709166,1.31,2.936601758237)); +#24632 = DIRECTION('',(0.,1.,-0.)); +#24633 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24634 = ORIENTED_EDGE('',*,*,#24635,.T.); +#24635 = EDGE_CURVE('',#24627,#24636,#24638,.T.); +#24636 = VERTEX_POINT('',#24637); +#24637 = CARTESIAN_POINT('',(1.818428052096,1.31,2.798865573933)); +#24638 = LINE('',#24639,#24640); +#24639 = CARTESIAN_POINT('',(1.818428052096,1.31,2.798865573933)); +#24640 = VECTOR('',#24641,1.); +#24641 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24642 = ORIENTED_EDGE('',*,*,#24643,.T.); +#24643 = EDGE_CURVE('',#24636,#24466,#24644,.T.); +#24644 = CIRCLE('',#24645,0.240135709166); +#24645 = AXIS2_PLACEMENT_3D('',#24646,#24647,#24648); +#24646 = CARTESIAN_POINT('',(2.015135709166,1.31,2.936601758237)); +#24647 = DIRECTION('',(0.,1.,-0.)); +#24648 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24649 = PLANE('',#24650); +#24650 = AXIS2_PLACEMENT_3D('',#24651,#24652,#24653); +#24651 = CARTESIAN_POINT('',(1.818428052096,1.31,2.798865573933)); +#24652 = DIRECTION('',(-0.,1.,0.)); +#24653 = DIRECTION('',(0.,0.,1.)); +#24654 = ADVANCED_FACE('',(#24655),#24674,.F.); +#24655 = FACE_BOUND('',#24656,.F.); +#24656 = EDGE_LOOP('',(#24657,#24665,#24672,#24673)); +#24657 = ORIENTED_EDGE('',*,*,#24658,.F.); +#24658 = EDGE_CURVE('',#24659,#24627,#24661,.T.); +#24659 = VERTEX_POINT('',#24660); +#24660 = CARTESIAN_POINT('',(1.941300858739,0.71,2.884902039386)); +#24661 = LINE('',#24662,#24663); +#24662 = CARTESIAN_POINT('',(1.941300858739,1.31,2.884902039386)); +#24663 = VECTOR('',#24664,1.); +#24664 = DIRECTION('',(-0.,1.,-0.)); +#24665 = ORIENTED_EDGE('',*,*,#24666,.T.); +#24666 = EDGE_CURVE('',#24659,#24533,#24667,.T.); +#24667 = CIRCLE('',#24668,9.013570916571E-02); +#24668 = AXIS2_PLACEMENT_3D('',#24669,#24670,#24671); +#24669 = CARTESIAN_POINT('',(2.015135709166,0.71,2.936601758237)); +#24670 = DIRECTION('',(0.,1.,-0.)); +#24671 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24672 = ORIENTED_EDGE('',*,*,#24540,.T.); +#24673 = ORIENTED_EDGE('',*,*,#24626,.F.); +#24674 = CYLINDRICAL_SURFACE('',#24675,9.013570916571E-02); +#24675 = AXIS2_PLACEMENT_3D('',#24676,#24677,#24678); +#24676 = CARTESIAN_POINT('',(2.015135709166,0.,2.936601758237)); +#24677 = DIRECTION('',(-0.,1.,-0.)); +#24678 = DIRECTION('',(0.,0.,1.)); +#24679 = ADVANCED_FACE('',(#24680),#24699,.T.); +#24680 = FACE_BOUND('',#24681,.T.); +#24681 = EDGE_LOOP('',(#24682,#24683,#24684,#24693)); +#24682 = ORIENTED_EDGE('',*,*,#24666,.T.); +#24683 = ORIENTED_EDGE('',*,*,#24571,.F.); +#24684 = ORIENTED_EDGE('',*,*,#24685,.F.); +#24685 = EDGE_CURVE('',#24686,#24564,#24688,.T.); +#24686 = VERTEX_POINT('',#24687); +#24687 = CARTESIAN_POINT('',(1.818428052096,0.71,2.798865573933)); +#24688 = CIRCLE('',#24689,0.240135709166); +#24689 = AXIS2_PLACEMENT_3D('',#24690,#24691,#24692); +#24690 = CARTESIAN_POINT('',(2.015135709166,0.71,2.936601758237)); +#24691 = DIRECTION('',(0.,1.,-0.)); +#24692 = DIRECTION('',(-0.819152044289,-0.,-0.573576436351)); +#24693 = ORIENTED_EDGE('',*,*,#24694,.T.); +#24694 = EDGE_CURVE('',#24686,#24659,#24695,.T.); +#24695 = LINE('',#24696,#24697); +#24696 = CARTESIAN_POINT('',(1.818428052096,0.71,2.798865573933)); +#24697 = VECTOR('',#24698,1.); +#24698 = DIRECTION('',(0.819152044289,-0.,0.573576436351)); +#24699 = PLANE('',#24700); +#24700 = AXIS2_PLACEMENT_3D('',#24701,#24702,#24703); +#24701 = CARTESIAN_POINT('',(1.818428052096,0.71,2.798865573933)); +#24702 = DIRECTION('',(0.,-1.,0.)); +#24703 = DIRECTION('',(0.,-0.,-1.)); +#24704 = ADVANCED_FACE('',(#24705),#24716,.T.); +#24705 = FACE_BOUND('',#24706,.T.); +#24706 = EDGE_LOOP('',(#24707,#24708,#24709,#24710)); +#24707 = ORIENTED_EDGE('',*,*,#24685,.T.); +#24708 = ORIENTED_EDGE('',*,*,#24603,.F.); +#24709 = ORIENTED_EDGE('',*,*,#24643,.F.); +#24710 = ORIENTED_EDGE('',*,*,#24711,.T.); +#24711 = EDGE_CURVE('',#24636,#24686,#24712,.T.); +#24712 = LINE('',#24713,#24714); +#24713 = CARTESIAN_POINT('',(1.818428052096,1.31,2.798865573933)); +#24714 = VECTOR('',#24715,1.); +#24715 = DIRECTION('',(-0.,-1.,-0.)); +#24716 = CYLINDRICAL_SURFACE('',#24717,0.240135709166); +#24717 = AXIS2_PLACEMENT_3D('',#24718,#24719,#24720); +#24718 = CARTESIAN_POINT('',(2.015135709166,0.,2.936601758237)); +#24719 = DIRECTION('',(-0.,1.,-0.)); +#24720 = DIRECTION('',(0.,0.,1.)); +#24721 = ADVANCED_FACE('',(#24722),#24738,.T.); +#24722 = FACE_BOUND('',#24723,.T.); +#24723 = EDGE_LOOP('',(#24724,#24725,#24731,#24732)); +#24724 = ORIENTED_EDGE('',*,*,#24635,.F.); +#24725 = ORIENTED_EDGE('',*,*,#24726,.F.); +#24726 = EDGE_CURVE('',#24141,#24627,#24727,.T.); +#24727 = LINE('',#24728,#24729); +#24728 = CARTESIAN_POINT('',(2.202447367972,1.31,2.511946172757)); +#24729 = VECTOR('',#24730,1.); +#24730 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#24731 = ORIENTED_EDGE('',*,*,#24140,.T.); +#24732 = ORIENTED_EDGE('',*,*,#24733,.T.); +#24733 = EDGE_CURVE('',#24132,#24636,#24734,.T.); +#24734 = LINE('',#24735,#24736); +#24735 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24736 = VECTOR('',#24737,1.); +#24737 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#24738 = PLANE('',#24739); +#24739 = AXIS2_PLACEMENT_3D('',#24740,#24741,#24742); +#24740 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24741 = DIRECTION('',(-0.,1.,0.)); +#24742 = DIRECTION('',(0.,0.,1.)); +#24743 = ADVANCED_FACE('',(#24744),#24760,.T.); +#24744 = FACE_BOUND('',#24745,.T.); +#24745 = EDGE_LOOP('',(#24746,#24747,#24748,#24754)); +#24746 = ORIENTED_EDGE('',*,*,#24726,.T.); +#24747 = ORIENTED_EDGE('',*,*,#24658,.F.); +#24748 = ORIENTED_EDGE('',*,*,#24749,.F.); +#24749 = EDGE_CURVE('',#24074,#24659,#24750,.T.); +#24750 = LINE('',#24751,#24752); +#24751 = CARTESIAN_POINT('',(2.202447367972,0.71,2.511946172757)); +#24752 = VECTOR('',#24753,1.); +#24753 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#24754 = ORIENTED_EDGE('',*,*,#24755,.T.); +#24755 = EDGE_CURVE('',#24074,#24141,#24756,.T.); +#24756 = LINE('',#24757,#24758); +#24757 = CARTESIAN_POINT('',(2.202447367972,1.31,2.511946172757)); +#24758 = VECTOR('',#24759,1.); +#24759 = DIRECTION('',(-0.,1.,-0.)); +#24760 = PLANE('',#24761); +#24761 = AXIS2_PLACEMENT_3D('',#24762,#24763,#24764); +#24762 = CARTESIAN_POINT('',(2.202447367972,1.31,2.511946172757)); +#24763 = DIRECTION('',(0.819152044289,0.,0.573576436351)); +#24764 = DIRECTION('',(0.573576436351,0.,-0.819152044289)); +#24765 = ADVANCED_FACE('',(#24766),#24777,.T.); +#24766 = FACE_BOUND('',#24767,.T.); +#24767 = EDGE_LOOP('',(#24768,#24769,#24770,#24776)); +#24768 = ORIENTED_EDGE('',*,*,#24749,.T.); +#24769 = ORIENTED_EDGE('',*,*,#24694,.F.); +#24770 = ORIENTED_EDGE('',*,*,#24771,.F.); +#24771 = EDGE_CURVE('',#24057,#24686,#24772,.T.); +#24772 = LINE('',#24773,#24774); +#24773 = CARTESIAN_POINT('',(2.079574561329,0.71,2.425909707305)); +#24774 = VECTOR('',#24775,1.); +#24775 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#24776 = ORIENTED_EDGE('',*,*,#24082,.T.); +#24777 = PLANE('',#24778); +#24778 = AXIS2_PLACEMENT_3D('',#24779,#24780,#24781); +#24779 = CARTESIAN_POINT('',(2.079574561329,0.71,2.425909707305)); +#24780 = DIRECTION('',(0.,-1.,-0.)); +#24781 = DIRECTION('',(0.,0.,-1.)); +#24782 = ADVANCED_FACE('',(#24783),#24794,.T.); +#24783 = FACE_BOUND('',#24784,.T.); +#24784 = EDGE_LOOP('',(#24785,#24786,#24787,#24788)); +#24785 = ORIENTED_EDGE('',*,*,#24771,.T.); +#24786 = ORIENTED_EDGE('',*,*,#24711,.F.); +#24787 = ORIENTED_EDGE('',*,*,#24733,.F.); +#24788 = ORIENTED_EDGE('',*,*,#24789,.T.); +#24789 = EDGE_CURVE('',#24132,#24057,#24790,.T.); +#24790 = LINE('',#24791,#24792); +#24791 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24792 = VECTOR('',#24793,1.); +#24793 = DIRECTION('',(-0.,-1.,-0.)); +#24794 = PLANE('',#24795); +#24795 = AXIS2_PLACEMENT_3D('',#24796,#24797,#24798); +#24796 = CARTESIAN_POINT('',(2.079574561329,1.31,2.425909707305)); +#24797 = DIRECTION('',(-0.819152044289,0.,-0.573576436351)); +#24798 = DIRECTION('',(-0.573576436351,0.,0.819152044289)); +#24799 = ADVANCED_FACE('',(#24800),#24813,.T.); +#24800 = FACE_BOUND('',#24801,.T.); +#24801 = EDGE_LOOP('',(#24802,#24803,#24804,#24805,#24812)); +#24802 = ORIENTED_EDGE('',*,*,#24148,.T.); +#24803 = ORIENTED_EDGE('',*,*,#24755,.F.); +#24804 = ORIENTED_EDGE('',*,*,#24073,.F.); +#24805 = ORIENTED_EDGE('',*,*,#24806,.T.); +#24806 = EDGE_CURVE('',#24066,#19809,#24807,.T.); +#24807 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#24808,#24809,#24810,#24811), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.158659670394E-06), + .PIECEWISE_BEZIER_KNOTS.); +#24808 = CARTESIAN_POINT('',(2.239876672637,0.71,2.4)); +#24809 = CARTESIAN_POINT('',(2.23995890207,0.71,2.397615197349)); +#24810 = CARTESIAN_POINT('',(2.24,0.709943060932,2.39522794345)); +#24811 = CARTESIAN_POINT('',(2.24,0.709829229338,2.392844440202)); +#24812 = ORIENTED_EDGE('',*,*,#19808,.T.); +#24813 = CYLINDRICAL_SURFACE('',#24814,0.207647533976); +#24814 = AXIS2_PLACEMENT_3D('',#24815,#24816,#24817); +#24815 = CARTESIAN_POINT('',(2.032352466024,0.,2.392844440202)); +#24816 = DIRECTION('',(-0.,-1.,-0.)); +#24817 = DIRECTION('',(0.,0.,-1.)); +#24818 = ADVANCED_FACE('',(#24819),#24832,.F.); +#24819 = FACE_BOUND('',#24820,.F.); +#24820 = EDGE_LOOP('',(#24821,#24822,#24823,#24824,#24831)); +#24821 = ORIENTED_EDGE('',*,*,#24131,.T.); +#24822 = ORIENTED_EDGE('',*,*,#24789,.T.); +#24823 = ORIENTED_EDGE('',*,*,#24054,.F.); +#24824 = ORIENTED_EDGE('',*,*,#24825,.F.); +#24825 = EDGE_CURVE('',#24411,#24055,#24826,.T.); +#24826 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#24827,#24828,#24829,#24830), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.171468027976E-06), + .PIECEWISE_BEZIER_KNOTS.); +#24827 = CARTESIAN_POINT('',(2.09,0.709829229338,2.392844440202)); +#24828 = CARTESIAN_POINT('',(2.09,0.709943264601,2.395232208042)); +#24829 = CARTESIAN_POINT('',(2.08985090245,0.71,2.397627997602)); +#24830 = CARTESIAN_POINT('',(2.089554180487,0.71,2.4)); +#24831 = ORIENTED_EDGE('',*,*,#24419,.T.); +#24832 = CYLINDRICAL_SURFACE('',#24833,5.764753397594E-02); +#24833 = AXIS2_PLACEMENT_3D('',#24834,#24835,#24836); +#24834 = CARTESIAN_POINT('',(2.032352466024,0.,2.392844440202)); +#24835 = DIRECTION('',(-0.,-1.,-0.)); +#24836 = DIRECTION('',(0.,0.,-1.)); +#24837 = ADVANCED_FACE('',(#24838),#24854,.F.); +#24838 = FACE_BOUND('',#24839,.T.); +#24839 = EDGE_LOOP('',(#24840,#24841,#24847,#24848)); +#24840 = ORIENTED_EDGE('',*,*,#24515,.T.); +#24841 = ORIENTED_EDGE('',*,*,#24842,.T.); +#24842 = EDGE_CURVE('',#24507,#24586,#24843,.T.); +#24843 = LINE('',#24844,#24845); +#24844 = CARTESIAN_POINT('',(1.775,1.16,3.25)); +#24845 = VECTOR('',#24846,1.); +#24846 = DIRECTION('',(-1.,0.,0.)); +#24847 = ORIENTED_EDGE('',*,*,#24585,.T.); +#24848 = ORIENTED_EDGE('',*,*,#24849,.T.); +#24849 = EDGE_CURVE('',#24588,#24516,#24850,.T.); +#24850 = LINE('',#24851,#24852); +#24851 = CARTESIAN_POINT('',(1.925,0.86,3.25)); +#24852 = VECTOR('',#24853,1.); +#24853 = DIRECTION('',(1.,0.,0.)); +#24854 = PLANE('',#24855); +#24855 = AXIS2_PLACEMENT_3D('',#24856,#24857,#24858); +#24856 = CARTESIAN_POINT('',(-0.315,0.,3.25)); +#24857 = DIRECTION('',(0.,0.,-1.)); +#24858 = DIRECTION('',(1.,0.,0.)); +#24859 = ADVANCED_FACE('',(#24860),#24894,.T.); +#24860 = FACE_BOUND('',#24861,.T.); +#24861 = EDGE_LOOP('',(#24862,#24872,#24880,#24888)); +#24862 = ORIENTED_EDGE('',*,*,#24863,.T.); +#24863 = EDGE_CURVE('',#24864,#24866,#24868,.T.); +#24864 = VERTEX_POINT('',#24865); +#24865 = CARTESIAN_POINT('',(1.925,1.31,0.563398241763)); +#24866 = VERTEX_POINT('',#24867); +#24867 = CARTESIAN_POINT('',(1.925,1.31,0.4)); +#24868 = LINE('',#24869,#24870); +#24869 = CARTESIAN_POINT('',(1.925,1.31,0.563398241763)); +#24870 = VECTOR('',#24871,1.); +#24871 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#24872 = ORIENTED_EDGE('',*,*,#24873,.T.); +#24873 = EDGE_CURVE('',#24866,#24874,#24876,.T.); +#24874 = VERTEX_POINT('',#24875); +#24875 = CARTESIAN_POINT('',(1.775,1.31,0.4)); +#24876 = LINE('',#24877,#24878); +#24877 = CARTESIAN_POINT('',(1.775,1.31,0.4)); +#24878 = VECTOR('',#24879,1.); +#24879 = DIRECTION('',(-1.,-0.,-0.)); +#24880 = ORIENTED_EDGE('',*,*,#24881,.F.); +#24881 = EDGE_CURVE('',#24882,#24874,#24884,.T.); +#24882 = VERTEX_POINT('',#24883); +#24883 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24884 = LINE('',#24885,#24886); +#24885 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24886 = VECTOR('',#24887,1.); +#24887 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#24888 = ORIENTED_EDGE('',*,*,#24889,.T.); +#24889 = EDGE_CURVE('',#24882,#24864,#24890,.T.); +#24890 = LINE('',#24891,#24892); +#24891 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24892 = VECTOR('',#24893,1.); +#24893 = DIRECTION('',(1.,0.,0.)); +#24894 = PLANE('',#24895); +#24895 = AXIS2_PLACEMENT_3D('',#24896,#24897,#24898); +#24896 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24897 = DIRECTION('',(-0.,1.,0.)); +#24898 = DIRECTION('',(0.,0.,1.)); +#24899 = ADVANCED_FACE('',(#24900),#24943,.T.); +#24900 = FACE_BOUND('',#24901,.T.); +#24901 = EDGE_LOOP('',(#24902,#24903,#24912,#24920,#24929,#24937)); +#24902 = ORIENTED_EDGE('',*,*,#24881,.T.); +#24903 = ORIENTED_EDGE('',*,*,#24904,.T.); +#24904 = EDGE_CURVE('',#24874,#24905,#24907,.T.); +#24905 = VERTEX_POINT('',#24906); +#24906 = CARTESIAN_POINT('',(1.775,1.16,0.25)); +#24907 = CIRCLE('',#24908,0.15); +#24908 = AXIS2_PLACEMENT_3D('',#24909,#24910,#24911); +#24909 = CARTESIAN_POINT('',(1.775,1.16,0.4)); +#24910 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#24911 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#24912 = ORIENTED_EDGE('',*,*,#24913,.F.); +#24913 = EDGE_CURVE('',#24914,#24905,#24916,.T.); +#24914 = VERTEX_POINT('',#24915); +#24915 = CARTESIAN_POINT('',(1.775,0.86,0.25)); +#24916 = LINE('',#24917,#24918); +#24917 = CARTESIAN_POINT('',(1.775,1.31,0.25)); +#24918 = VECTOR('',#24919,1.); +#24919 = DIRECTION('',(0.,1.,0.)); +#24920 = ORIENTED_EDGE('',*,*,#24921,.T.); +#24921 = EDGE_CURVE('',#24914,#24922,#24924,.T.); +#24922 = VERTEX_POINT('',#24923); +#24923 = CARTESIAN_POINT('',(1.775,0.71,0.4)); +#24924 = CIRCLE('',#24925,0.15); +#24925 = AXIS2_PLACEMENT_3D('',#24926,#24927,#24928); +#24926 = CARTESIAN_POINT('',(1.775,0.86,0.4)); +#24927 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#24928 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#24929 = ORIENTED_EDGE('',*,*,#24930,.F.); +#24930 = EDGE_CURVE('',#24931,#24922,#24933,.T.); +#24931 = VERTEX_POINT('',#24932); +#24932 = CARTESIAN_POINT('',(1.775,0.71,0.563398241763)); +#24933 = LINE('',#24934,#24935); +#24934 = CARTESIAN_POINT('',(1.775,0.71,0.563398241763)); +#24935 = VECTOR('',#24936,1.); +#24936 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#24937 = ORIENTED_EDGE('',*,*,#24938,.T.); +#24938 = EDGE_CURVE('',#24931,#24882,#24939,.T.); +#24939 = LINE('',#24940,#24941); +#24940 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24941 = VECTOR('',#24942,1.); +#24942 = DIRECTION('',(0.,1.,0.)); +#24943 = PLANE('',#24944); +#24944 = AXIS2_PLACEMENT_3D('',#24945,#24946,#24947); +#24945 = CARTESIAN_POINT('',(1.775,1.31,0.563398241763)); +#24946 = DIRECTION('',(-1.,0.,-6.919006095162E-16)); +#24947 = DIRECTION('',(-6.919006095162E-16,0.,1.)); +#24948 = ADVANCED_FACE('',(#24949),#24974,.T.); +#24949 = FACE_BOUND('',#24950,.T.); +#24950 = EDGE_LOOP('',(#24951,#24952,#24960,#24968)); +#24951 = ORIENTED_EDGE('',*,*,#24930,.T.); +#24952 = ORIENTED_EDGE('',*,*,#24953,.T.); +#24953 = EDGE_CURVE('',#24922,#24954,#24956,.T.); +#24954 = VERTEX_POINT('',#24955); +#24955 = CARTESIAN_POINT('',(1.925,0.71,0.4)); +#24956 = LINE('',#24957,#24958); +#24957 = CARTESIAN_POINT('',(1.925,0.71,0.4)); +#24958 = VECTOR('',#24959,1.); +#24959 = DIRECTION('',(1.,-0.,-0.)); +#24960 = ORIENTED_EDGE('',*,*,#24961,.F.); +#24961 = EDGE_CURVE('',#24962,#24954,#24964,.T.); +#24962 = VERTEX_POINT('',#24963); +#24963 = CARTESIAN_POINT('',(1.925,0.71,0.563398241763)); +#24964 = LINE('',#24965,#24966); +#24965 = CARTESIAN_POINT('',(1.925,0.71,0.563398241763)); +#24966 = VECTOR('',#24967,1.); +#24967 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#24968 = ORIENTED_EDGE('',*,*,#24969,.T.); +#24969 = EDGE_CURVE('',#24962,#24931,#24970,.T.); +#24970 = LINE('',#24971,#24972); +#24971 = CARTESIAN_POINT('',(1.775,0.71,0.563398241763)); +#24972 = VECTOR('',#24973,1.); +#24973 = DIRECTION('',(-1.,0.,0.)); +#24974 = PLANE('',#24975); +#24975 = AXIS2_PLACEMENT_3D('',#24976,#24977,#24978); +#24976 = CARTESIAN_POINT('',(1.775,0.71,0.563398241763)); +#24977 = DIRECTION('',(0.,-1.,-0.)); +#24978 = DIRECTION('',(0.,0.,-1.)); +#24979 = ADVANCED_FACE('',(#24980),#25014,.T.); +#24980 = FACE_BOUND('',#24981,.T.); +#24981 = EDGE_LOOP('',(#24982,#24992,#24999,#25000,#25006,#25007)); +#24982 = ORIENTED_EDGE('',*,*,#24983,.F.); +#24983 = EDGE_CURVE('',#24984,#24986,#24988,.T.); +#24984 = VERTEX_POINT('',#24985); +#24985 = CARTESIAN_POINT('',(1.925,1.16,0.25)); +#24986 = VERTEX_POINT('',#24987); +#24987 = CARTESIAN_POINT('',(1.925,0.86,0.25)); +#24988 = LINE('',#24989,#24990); +#24989 = CARTESIAN_POINT('',(1.925,1.31,0.25)); +#24990 = VECTOR('',#24991,1.); +#24991 = DIRECTION('',(0.,-1.,0.)); +#24992 = ORIENTED_EDGE('',*,*,#24993,.T.); +#24993 = EDGE_CURVE('',#24984,#24866,#24994,.T.); +#24994 = CIRCLE('',#24995,0.15); +#24995 = AXIS2_PLACEMENT_3D('',#24996,#24997,#24998); +#24996 = CARTESIAN_POINT('',(1.925,1.16,0.4)); +#24997 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#24998 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#24999 = ORIENTED_EDGE('',*,*,#24863,.F.); +#25000 = ORIENTED_EDGE('',*,*,#25001,.T.); +#25001 = EDGE_CURVE('',#24864,#24962,#25002,.T.); +#25002 = LINE('',#25003,#25004); +#25003 = CARTESIAN_POINT('',(1.925,1.31,0.563398241763)); +#25004 = VECTOR('',#25005,1.); +#25005 = DIRECTION('',(0.,-1.,0.)); +#25006 = ORIENTED_EDGE('',*,*,#24961,.T.); +#25007 = ORIENTED_EDGE('',*,*,#25008,.T.); +#25008 = EDGE_CURVE('',#24954,#24986,#25009,.T.); +#25009 = CIRCLE('',#25010,0.15); +#25010 = AXIS2_PLACEMENT_3D('',#25011,#25012,#25013); +#25011 = CARTESIAN_POINT('',(1.925,0.86,0.4)); +#25012 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#25013 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#25014 = PLANE('',#25015); +#25015 = AXIS2_PLACEMENT_3D('',#25016,#25017,#25018); +#25016 = CARTESIAN_POINT('',(1.925,1.31,0.563398241763)); +#25017 = DIRECTION('',(1.,0.,6.919006095162E-16)); +#25018 = DIRECTION('',(6.919006095162E-16,0.,-1.)); +#25019 = ADVANCED_FACE('',(#25020),#25047,.T.); +#25020 = FACE_BOUND('',#25021,.T.); +#25021 = EDGE_LOOP('',(#25022,#25023,#25032,#25040)); +#25022 = ORIENTED_EDGE('',*,*,#24889,.F.); +#25023 = ORIENTED_EDGE('',*,*,#25024,.F.); +#25024 = EDGE_CURVE('',#25025,#24882,#25027,.T.); +#25025 = VERTEX_POINT('',#25026); +#25026 = CARTESIAN_POINT('',(1.818428052096,1.31,0.701134426067)); +#25027 = CIRCLE('',#25028,0.240135709166); +#25028 = AXIS2_PLACEMENT_3D('',#25029,#25030,#25031); +#25029 = CARTESIAN_POINT('',(2.015135709166,1.31,0.563398241763)); +#25030 = DIRECTION('',(0.,-1.,-0.)); +#25031 = DIRECTION('',(-0.819152044289,-0.,0.573576436351)); +#25032 = ORIENTED_EDGE('',*,*,#25033,.T.); +#25033 = EDGE_CURVE('',#25025,#25034,#25036,.T.); +#25034 = VERTEX_POINT('',#25035); +#25035 = CARTESIAN_POINT('',(1.941300858739,1.31,0.615097960614)); +#25036 = LINE('',#25037,#25038); +#25037 = CARTESIAN_POINT('',(1.818428052096,1.31,0.701134426067)); +#25038 = VECTOR('',#25039,1.); +#25039 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#25040 = ORIENTED_EDGE('',*,*,#25041,.T.); +#25041 = EDGE_CURVE('',#25034,#24864,#25042,.T.); +#25042 = CIRCLE('',#25043,9.013570916571E-02); +#25043 = AXIS2_PLACEMENT_3D('',#25044,#25045,#25046); +#25044 = CARTESIAN_POINT('',(2.015135709166,1.31,0.563398241763)); +#25045 = DIRECTION('',(0.,-1.,-0.)); +#25046 = DIRECTION('',(-0.819152044289,-0.,0.573576436351)); +#25047 = PLANE('',#25048); +#25048 = AXIS2_PLACEMENT_3D('',#25049,#25050,#25051); +#25049 = CARTESIAN_POINT('',(1.818428052096,1.31,0.701134426067)); +#25050 = DIRECTION('',(-0.,1.,0.)); +#25051 = DIRECTION('',(0.,0.,1.)); +#25052 = ADVANCED_FACE('',(#25053),#25072,.T.); +#25053 = FACE_BOUND('',#25054,.T.); +#25054 = EDGE_LOOP('',(#25055,#25056,#25057,#25066)); +#25055 = ORIENTED_EDGE('',*,*,#25024,.T.); +#25056 = ORIENTED_EDGE('',*,*,#24938,.F.); +#25057 = ORIENTED_EDGE('',*,*,#25058,.F.); +#25058 = EDGE_CURVE('',#25059,#24931,#25061,.T.); +#25059 = VERTEX_POINT('',#25060); +#25060 = CARTESIAN_POINT('',(1.818428052096,0.71,0.701134426067)); +#25061 = CIRCLE('',#25062,0.240135709166); +#25062 = AXIS2_PLACEMENT_3D('',#25063,#25064,#25065); +#25063 = CARTESIAN_POINT('',(2.015135709166,0.71,0.563398241763)); +#25064 = DIRECTION('',(0.,-1.,-0.)); +#25065 = DIRECTION('',(-0.819152044289,-0.,0.573576436351)); +#25066 = ORIENTED_EDGE('',*,*,#25067,.T.); +#25067 = EDGE_CURVE('',#25059,#25025,#25068,.T.); +#25068 = LINE('',#25069,#25070); +#25069 = CARTESIAN_POINT('',(1.818428052096,1.31,0.701134426067)); +#25070 = VECTOR('',#25071,1.); +#25071 = DIRECTION('',(0.,1.,0.)); +#25072 = CYLINDRICAL_SURFACE('',#25073,0.240135709166); +#25073 = AXIS2_PLACEMENT_3D('',#25074,#25075,#25076); +#25074 = CARTESIAN_POINT('',(2.015135709166,0.,0.563398241763)); +#25075 = DIRECTION('',(0.,-1.,-0.)); +#25076 = DIRECTION('',(0.,0.,-1.)); +#25077 = ADVANCED_FACE('',(#25078),#25097,.T.); +#25078 = FACE_BOUND('',#25079,.T.); +#25079 = EDGE_LOOP('',(#25080,#25081,#25082,#25091)); +#25080 = ORIENTED_EDGE('',*,*,#25058,.T.); +#25081 = ORIENTED_EDGE('',*,*,#24969,.F.); +#25082 = ORIENTED_EDGE('',*,*,#25083,.F.); +#25083 = EDGE_CURVE('',#25084,#24962,#25086,.T.); +#25084 = VERTEX_POINT('',#25085); +#25085 = CARTESIAN_POINT('',(1.941300858739,0.71,0.615097960614)); +#25086 = CIRCLE('',#25087,9.013570916571E-02); +#25087 = AXIS2_PLACEMENT_3D('',#25088,#25089,#25090); +#25088 = CARTESIAN_POINT('',(2.015135709166,0.71,0.563398241763)); +#25089 = DIRECTION('',(0.,-1.,-0.)); +#25090 = DIRECTION('',(-0.819152044289,-0.,0.573576436351)); +#25091 = ORIENTED_EDGE('',*,*,#25092,.T.); +#25092 = EDGE_CURVE('',#25084,#25059,#25093,.T.); +#25093 = LINE('',#25094,#25095); +#25094 = CARTESIAN_POINT('',(1.818428052096,0.71,0.701134426067)); +#25095 = VECTOR('',#25096,1.); +#25096 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#25097 = PLANE('',#25098); +#25098 = AXIS2_PLACEMENT_3D('',#25099,#25100,#25101); +#25099 = CARTESIAN_POINT('',(1.818428052096,0.71,0.701134426067)); +#25100 = DIRECTION('',(0.,-1.,0.)); +#25101 = DIRECTION('',(0.,0.,-1.)); +#25102 = ADVANCED_FACE('',(#25103),#25114,.F.); +#25103 = FACE_BOUND('',#25104,.F.); +#25104 = EDGE_LOOP('',(#25105,#25111,#25112,#25113)); +#25105 = ORIENTED_EDGE('',*,*,#25106,.F.); +#25106 = EDGE_CURVE('',#25034,#25084,#25107,.T.); +#25107 = LINE('',#25108,#25109); +#25108 = CARTESIAN_POINT('',(1.941300858739,1.31,0.615097960614)); +#25109 = VECTOR('',#25110,1.); +#25110 = DIRECTION('',(0.,-1.,0.)); +#25111 = ORIENTED_EDGE('',*,*,#25041,.T.); +#25112 = ORIENTED_EDGE('',*,*,#25001,.T.); +#25113 = ORIENTED_EDGE('',*,*,#25083,.F.); +#25114 = CYLINDRICAL_SURFACE('',#25115,9.013570916571E-02); +#25115 = AXIS2_PLACEMENT_3D('',#25116,#25117,#25118); +#25116 = CARTESIAN_POINT('',(2.015135709166,0.,0.563398241763)); +#25117 = DIRECTION('',(0.,-1.,-0.)); +#25118 = DIRECTION('',(0.,0.,-1.)); +#25119 = ADVANCED_FACE('',(#25120),#25136,.T.); +#25120 = FACE_BOUND('',#25121,.T.); +#25121 = EDGE_LOOP('',(#25122,#25123,#25129,#25130)); +#25122 = ORIENTED_EDGE('',*,*,#25033,.F.); +#25123 = ORIENTED_EDGE('',*,*,#25124,.F.); +#25124 = EDGE_CURVE('',#24107,#25025,#25125,.T.); +#25125 = LINE('',#25126,#25127); +#25126 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#25127 = VECTOR('',#25128,1.); +#25128 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#25129 = ORIENTED_EDGE('',*,*,#24106,.T.); +#25130 = ORIENTED_EDGE('',*,*,#25131,.T.); +#25131 = EDGE_CURVE('',#24098,#25034,#25132,.T.); +#25132 = LINE('',#25133,#25134); +#25133 = CARTESIAN_POINT('',(2.202447367972,1.31,0.988053827243)); +#25134 = VECTOR('',#25135,1.); +#25135 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#25136 = PLANE('',#25137); +#25137 = AXIS2_PLACEMENT_3D('',#25138,#25139,#25140); +#25138 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#25139 = DIRECTION('',(0.,1.,0.)); +#25140 = DIRECTION('',(0.,-0.,1.)); +#25141 = ADVANCED_FACE('',(#25142),#25158,.T.); +#25142 = FACE_BOUND('',#25143,.T.); +#25143 = EDGE_LOOP('',(#25144,#25145,#25146,#25152)); +#25144 = ORIENTED_EDGE('',*,*,#25124,.T.); +#25145 = ORIENTED_EDGE('',*,*,#25067,.F.); +#25146 = ORIENTED_EDGE('',*,*,#25147,.F.); +#25147 = EDGE_CURVE('',#24183,#25059,#25148,.T.); +#25148 = LINE('',#25149,#25150); +#25149 = CARTESIAN_POINT('',(2.079574561329,0.71,1.074090292695)); +#25150 = VECTOR('',#25151,1.); +#25151 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#25152 = ORIENTED_EDGE('',*,*,#25153,.T.); +#25153 = EDGE_CURVE('',#24183,#24107,#25154,.T.); +#25154 = LINE('',#25155,#25156); +#25155 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#25156 = VECTOR('',#25157,1.); +#25157 = DIRECTION('',(0.,1.,0.)); +#25158 = PLANE('',#25159); +#25159 = AXIS2_PLACEMENT_3D('',#25160,#25161,#25162); +#25160 = CARTESIAN_POINT('',(2.079574561329,1.31,1.074090292695)); +#25161 = DIRECTION('',(-0.819152044289,0.,0.573576436351)); +#25162 = DIRECTION('',(0.573576436351,0.,0.819152044289)); +#25163 = ADVANCED_FACE('',(#25164),#25175,.T.); +#25164 = FACE_BOUND('',#25165,.T.); +#25165 = EDGE_LOOP('',(#25166,#25167,#25168,#25174)); +#25166 = ORIENTED_EDGE('',*,*,#25147,.T.); +#25167 = ORIENTED_EDGE('',*,*,#25092,.F.); +#25168 = ORIENTED_EDGE('',*,*,#25169,.F.); +#25169 = EDGE_CURVE('',#24166,#25084,#25170,.T.); +#25170 = LINE('',#25171,#25172); +#25171 = CARTESIAN_POINT('',(2.202447367972,0.71,0.988053827243)); +#25172 = VECTOR('',#25173,1.); +#25173 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#25174 = ORIENTED_EDGE('',*,*,#24191,.T.); +#25175 = PLANE('',#25176); +#25176 = AXIS2_PLACEMENT_3D('',#25177,#25178,#25179); +#25177 = CARTESIAN_POINT('',(2.079574561329,0.71,1.074090292695)); +#25178 = DIRECTION('',(0.,-1.,0.)); +#25179 = DIRECTION('',(0.,-0.,-1.)); +#25180 = ADVANCED_FACE('',(#25181),#25192,.T.); +#25181 = FACE_BOUND('',#25182,.T.); +#25182 = EDGE_LOOP('',(#25183,#25184,#25185,#25186)); +#25183 = ORIENTED_EDGE('',*,*,#25169,.T.); +#25184 = ORIENTED_EDGE('',*,*,#25106,.F.); +#25185 = ORIENTED_EDGE('',*,*,#25131,.F.); +#25186 = ORIENTED_EDGE('',*,*,#25187,.T.); +#25187 = EDGE_CURVE('',#24098,#24166,#25188,.T.); +#25188 = LINE('',#25189,#25190); +#25189 = CARTESIAN_POINT('',(2.202447367972,1.31,0.988053827243)); +#25190 = VECTOR('',#25191,1.); +#25191 = DIRECTION('',(0.,-1.,0.)); +#25192 = PLANE('',#25193); +#25193 = AXIS2_PLACEMENT_3D('',#25194,#25195,#25196); +#25194 = CARTESIAN_POINT('',(2.202447367972,1.31,0.988053827243)); +#25195 = DIRECTION('',(0.819152044289,0.,-0.573576436351)); +#25196 = DIRECTION('',(-0.573576436351,0.,-0.819152044289)); +#25197 = ADVANCED_FACE('',(#25198),#25211,.F.); +#25198 = FACE_BOUND('',#25199,.F.); +#25199 = EDGE_LOOP('',(#25200,#25201,#25208,#25209,#25210)); +#25200 = ORIENTED_EDGE('',*,*,#24426,.T.); +#25201 = ORIENTED_EDGE('',*,*,#25202,.F.); +#25202 = EDGE_CURVE('',#24175,#24427,#25203,.T.); +#25203 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25204,#25205,#25206,#25207), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.171468027976E-06), + .PIECEWISE_BEZIER_KNOTS.); +#25204 = CARTESIAN_POINT('',(2.089554180487,0.71,1.1)); +#25205 = CARTESIAN_POINT('',(2.08985090245,0.71,1.102372002398)); +#25206 = CARTESIAN_POINT('',(2.09,0.709943264601,1.104767791958)); +#25207 = CARTESIAN_POINT('',(2.09,0.709829229338,1.107155559798)); +#25208 = ORIENTED_EDGE('',*,*,#24182,.T.); +#25209 = ORIENTED_EDGE('',*,*,#25153,.T.); +#25210 = ORIENTED_EDGE('',*,*,#24114,.F.); +#25211 = CYLINDRICAL_SURFACE('',#25212,5.764753397594E-02); +#25212 = AXIS2_PLACEMENT_3D('',#25213,#25214,#25215); +#25213 = CARTESIAN_POINT('',(2.032352466024,0.,1.107155559798)); +#25214 = DIRECTION('',(0.,1.,0.)); +#25215 = DIRECTION('',(0.,-0.,1.)); +#25216 = ADVANCED_FACE('',(#25217),#25230,.T.); +#25217 = FACE_BOUND('',#25218,.T.); +#25218 = EDGE_LOOP('',(#25219,#25220,#25227,#25228,#25229)); +#25219 = ORIENTED_EDGE('',*,*,#19792,.T.); +#25220 = ORIENTED_EDGE('',*,*,#25221,.T.); +#25221 = EDGE_CURVE('',#19784,#24164,#25222,.T.); +#25222 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25223,#25224,#25225,#25226), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,7.158659670393E-06), + .PIECEWISE_BEZIER_KNOTS.); +#25223 = CARTESIAN_POINT('',(2.24,0.709829229338,1.107155559798)); +#25224 = CARTESIAN_POINT('',(2.24,0.709943060932,1.10477205655)); +#25225 = CARTESIAN_POINT('',(2.23995890207,0.71,1.102384802651)); +#25226 = CARTESIAN_POINT('',(2.239876672637,0.71,1.1)); +#25227 = ORIENTED_EDGE('',*,*,#24163,.T.); +#25228 = ORIENTED_EDGE('',*,*,#25187,.F.); +#25229 = ORIENTED_EDGE('',*,*,#24097,.F.); +#25230 = CYLINDRICAL_SURFACE('',#25231,0.207647533976); +#25231 = AXIS2_PLACEMENT_3D('',#25232,#25233,#25234); +#25232 = CARTESIAN_POINT('',(2.032352466024,0.,1.107155559798)); +#25233 = DIRECTION('',(0.,1.,0.)); +#25234 = DIRECTION('',(0.,-0.,1.)); +#25235 = ADVANCED_FACE('',(#25236),#25252,.F.); +#25236 = FACE_BOUND('',#25237,.T.); +#25237 = EDGE_LOOP('',(#25238,#25239,#25245,#25246)); +#25238 = ORIENTED_EDGE('',*,*,#24913,.T.); +#25239 = ORIENTED_EDGE('',*,*,#25240,.T.); +#25240 = EDGE_CURVE('',#24905,#24984,#25241,.T.); +#25241 = LINE('',#25242,#25243); +#25242 = CARTESIAN_POINT('',(1.925,1.16,0.25)); +#25243 = VECTOR('',#25244,1.); +#25244 = DIRECTION('',(1.,0.,-0.)); +#25245 = ORIENTED_EDGE('',*,*,#24983,.T.); +#25246 = ORIENTED_EDGE('',*,*,#25247,.T.); +#25247 = EDGE_CURVE('',#24986,#24914,#25248,.T.); +#25248 = LINE('',#25249,#25250); +#25249 = CARTESIAN_POINT('',(1.775,0.86,0.25)); +#25250 = VECTOR('',#25251,1.); +#25251 = DIRECTION('',(-1.,0.,0.)); +#25252 = PLANE('',#25253); +#25253 = AXIS2_PLACEMENT_3D('',#25254,#25255,#25256); +#25254 = CARTESIAN_POINT('',(-0.315,0.,0.25)); +#25255 = DIRECTION('',(0.,0.,1.)); +#25256 = DIRECTION('',(1.,0.,-0.)); +#25257 = ADVANCED_FACE('',(#25258),#25264,.F.); +#25258 = FACE_BOUND('',#25259,.F.); +#25259 = EDGE_LOOP('',(#25260,#25261,#25262,#25263)); +#25260 = ORIENTED_EDGE('',*,*,#24346,.T.); +#25261 = ORIENTED_EDGE('',*,*,#19715,.T.); +#25262 = ORIENTED_EDGE('',*,*,#24315,.T.); +#25263 = ORIENTED_EDGE('',*,*,#24369,.T.); +#25264 = CYLINDRICAL_SURFACE('',#25265,0.15); +#25265 = AXIS2_PLACEMENT_3D('',#25266,#25267,#25268); +#25266 = CARTESIAN_POINT('',(2.09,-0.5,0.8)); +#25267 = DIRECTION('',(-1.,0.,0.)); +#25268 = DIRECTION('',(0.,0.,1.)); +#25269 = ADVANCED_FACE('',(#25270),#25276,.T.); +#25270 = FACE_BOUND('',#25271,.T.); +#25271 = EDGE_LOOP('',(#25272,#25273,#25274,#25275)); +#25272 = ORIENTED_EDGE('',*,*,#24506,.F.); +#25273 = ORIENTED_EDGE('',*,*,#24475,.F.); +#25274 = ORIENTED_EDGE('',*,*,#24595,.F.); +#25275 = ORIENTED_EDGE('',*,*,#24842,.F.); +#25276 = CYLINDRICAL_SURFACE('',#25277,0.15); +#25277 = AXIS2_PLACEMENT_3D('',#25278,#25279,#25280); +#25278 = CARTESIAN_POINT('',(-0.315,1.16,3.1)); +#25279 = DIRECTION('',(1.,0.,0.)); +#25280 = DIRECTION('',(0.,0.,-1.)); +#25281 = ADVANCED_FACE('',(#25282),#25288,.T.); +#25282 = FACE_BOUND('',#25283,.T.); +#25283 = EDGE_LOOP('',(#25284,#25285,#25286,#25287)); +#25284 = ORIENTED_EDGE('',*,*,#24610,.F.); +#25285 = ORIENTED_EDGE('',*,*,#24555,.F.); +#25286 = ORIENTED_EDGE('',*,*,#24523,.F.); +#25287 = ORIENTED_EDGE('',*,*,#24849,.F.); +#25288 = CYLINDRICAL_SURFACE('',#25289,0.15); +#25289 = AXIS2_PLACEMENT_3D('',#25290,#25291,#25292); +#25290 = CARTESIAN_POINT('',(-0.315,0.86,3.1)); +#25291 = DIRECTION('',(-1.,0.,0.)); +#25292 = DIRECTION('',(0.,0.,1.)); +#25293 = ADVANCED_FACE('',(#25294),#25300,.T.); +#25294 = FACE_BOUND('',#25295,.T.); +#25295 = EDGE_LOOP('',(#25296,#25297,#25298,#25299)); +#25296 = ORIENTED_EDGE('',*,*,#24904,.F.); +#25297 = ORIENTED_EDGE('',*,*,#24873,.F.); +#25298 = ORIENTED_EDGE('',*,*,#24993,.F.); +#25299 = ORIENTED_EDGE('',*,*,#25240,.F.); +#25300 = CYLINDRICAL_SURFACE('',#25301,0.15); +#25301 = AXIS2_PLACEMENT_3D('',#25302,#25303,#25304); +#25302 = CARTESIAN_POINT('',(-0.315,1.16,0.4)); +#25303 = DIRECTION('',(-1.,-0.,0.)); +#25304 = DIRECTION('',(0.,0.,1.)); +#25305 = ADVANCED_FACE('',(#25306),#25312,.T.); +#25306 = FACE_BOUND('',#25307,.T.); +#25307 = EDGE_LOOP('',(#25308,#25309,#25310,#25311)); +#25308 = ORIENTED_EDGE('',*,*,#25008,.F.); +#25309 = ORIENTED_EDGE('',*,*,#24953,.F.); +#25310 = ORIENTED_EDGE('',*,*,#24921,.F.); +#25311 = ORIENTED_EDGE('',*,*,#25247,.F.); +#25312 = CYLINDRICAL_SURFACE('',#25313,0.15); +#25313 = AXIS2_PLACEMENT_3D('',#25314,#25315,#25316); +#25314 = CARTESIAN_POINT('',(-0.315,0.86,0.4)); +#25315 = DIRECTION('',(1.,0.,0.)); +#25316 = DIRECTION('',(0.,0.,-1.)); +#25317 = ADVANCED_FACE('',(#25318),#25326,.F.); +#25318 = FACE_BOUND('',#25319,.F.); +#25319 = EDGE_LOOP('',(#25320,#25321,#25322,#25323,#25324,#25325)); +#25320 = ORIENTED_EDGE('',*,*,#24434,.T.); +#25321 = ORIENTED_EDGE('',*,*,#24215,.T.); +#25322 = ORIENTED_EDGE('',*,*,#19783,.T.); +#25323 = ORIENTED_EDGE('',*,*,#25221,.T.); +#25324 = ORIENTED_EDGE('',*,*,#24174,.T.); +#25325 = ORIENTED_EDGE('',*,*,#25202,.T.); +#25326 = CYLINDRICAL_SURFACE('',#25327,0.15); +#25327 = AXIS2_PLACEMENT_3D('',#25328,#25329,#25330); +#25328 = CARTESIAN_POINT('',(2.09,0.56,1.1)); +#25329 = DIRECTION('',(-1.,0.,-0.)); +#25330 = DIRECTION('',(0.,0.,1.)); +#25331 = ADVANCED_FACE('',(#25332),#25338,.F.); +#25332 = FACE_BOUND('',#25333,.F.); +#25333 = EDGE_LOOP('',(#25334,#25335,#25336,#25337)); +#25334 = ORIENTED_EDGE('',*,*,#24253,.T.); +#25335 = ORIENTED_EDGE('',*,*,#19766,.T.); +#25336 = ORIENTED_EDGE('',*,*,#24222,.T.); +#25337 = ORIENTED_EDGE('',*,*,#24442,.T.); +#25338 = CYLINDRICAL_SURFACE('',#25339,0.15); +#25339 = AXIS2_PLACEMENT_3D('',#25340,#25341,#25342); +#25340 = CARTESIAN_POINT('',(2.09,0.5,1.1)); +#25341 = DIRECTION('',(-1.,0.,0.)); +#25342 = DIRECTION('',(0.,0.,1.)); +#25343 = ADVANCED_FACE('',(#25344),#25355,.F.); +#25344 = FACE_BOUND('',#25345,.F.); +#25345 = EDGE_LOOP('',(#25346,#25347,#25353,#25354)); +#25346 = ORIENTED_EDGE('',*,*,#19833,.T.); +#25347 = ORIENTED_EDGE('',*,*,#25348,.T.); +#25348 = EDGE_CURVE('',#19834,#24394,#25349,.T.); +#25349 = LINE('',#25350,#25351); +#25350 = CARTESIAN_POINT('',(2.09,0.35,2.4)); +#25351 = VECTOR('',#25352,1.); +#25352 = DIRECTION('',(-1.,-0.,0.)); +#25353 = ORIENTED_EDGE('',*,*,#24402,.T.); +#25354 = ORIENTED_EDGE('',*,*,#24040,.T.); +#25355 = CYLINDRICAL_SURFACE('',#25356,0.15); +#25356 = AXIS2_PLACEMENT_3D('',#25357,#25358,#25359); +#25357 = CARTESIAN_POINT('',(2.09,0.5,2.4)); +#25358 = DIRECTION('',(-1.,0.,0.)); +#25359 = DIRECTION('',(0.,0.,1.)); +#25360 = ADVANCED_FACE('',(#25361),#25367,.T.); +#25361 = FACE_BOUND('',#25362,.T.); +#25362 = EDGE_LOOP('',(#25363,#25364,#25365,#25366)); +#25363 = ORIENTED_EDGE('',*,*,#24393,.F.); +#25364 = ORIENTED_EDGE('',*,*,#24009,.F.); +#25365 = ORIENTED_EDGE('',*,*,#19842,.F.); +#25366 = ORIENTED_EDGE('',*,*,#25348,.T.); +#25367 = CYLINDRICAL_SURFACE('',#25368,0.15); +#25368 = AXIS2_PLACEMENT_3D('',#25369,#25370,#25371); +#25369 = CARTESIAN_POINT('',(2.09,0.2,2.4)); +#25370 = DIRECTION('',(1.,0.,0.)); +#25371 = DIRECTION('',(0.,0.,-1.)); +#25372 = ADVANCED_FACE('',(#25373),#25381,.F.); +#25373 = FACE_BOUND('',#25374,.F.); +#25374 = EDGE_LOOP('',(#25375,#25376,#25377,#25378,#25379,#25380)); +#25375 = ORIENTED_EDGE('',*,*,#24825,.T.); +#25376 = ORIENTED_EDGE('',*,*,#24065,.T.); +#25377 = ORIENTED_EDGE('',*,*,#24806,.T.); +#25378 = ORIENTED_EDGE('',*,*,#19816,.T.); +#25379 = ORIENTED_EDGE('',*,*,#24024,.T.); +#25380 = ORIENTED_EDGE('',*,*,#24410,.T.); +#25381 = CYLINDRICAL_SURFACE('',#25382,0.15); +#25382 = AXIS2_PLACEMENT_3D('',#25383,#25384,#25385); +#25383 = CARTESIAN_POINT('',(2.09,0.56,2.4)); +#25384 = DIRECTION('',(-1.,0.,0.)); +#25385 = DIRECTION('',(0.,0.,1.)); +#25386 = ADVANCED_FACE('',(#25387),#25393,.T.); +#25387 = FACE_BOUND('',#25388,.T.); +#25388 = EDGE_LOOP('',(#25389,#25390,#25391,#25392)); +#25389 = ORIENTED_EDGE('',*,*,#24361,.F.); +#25390 = ORIENTED_EDGE('',*,*,#24268,.F.); +#25391 = ORIENTED_EDGE('',*,*,#19732,.F.); +#25392 = ORIENTED_EDGE('',*,*,#24308,.F.); +#25393 = CYLINDRICAL_SURFACE('',#25394,0.3); +#25394 = AXIS2_PLACEMENT_3D('',#25395,#25396,#25397); +#25395 = CARTESIAN_POINT('',(2.09,-5.E-02,-0.15)); +#25396 = DIRECTION('',(1.,0.,0.)); +#25397 = DIRECTION('',(0.,0.,-1.)); +#25398 = ADVANCED_FACE('',(#25399),#25405,.T.); +#25399 = FACE_BOUND('',#25400,.T.); +#25400 = EDGE_LOOP('',(#25401,#25402,#25403,#25404)); +#25401 = ORIENTED_EDGE('',*,*,#24450,.F.); +#25402 = ORIENTED_EDGE('',*,*,#24237,.F.); +#25403 = ORIENTED_EDGE('',*,*,#19749,.F.); +#25404 = ORIENTED_EDGE('',*,*,#24284,.F.); +#25405 = CYLINDRICAL_SURFACE('',#25406,0.3); +#25406 = AXIS2_PLACEMENT_3D('',#25407,#25408,#25409); +#25407 = CARTESIAN_POINT('',(2.09,5.E-02,-0.15)); +#25408 = DIRECTION('',(1.,0.,0.)); +#25409 = DIRECTION('',(0.,0.,-1.)); +#25410 = ADVANCED_FACE('',(#25411),#25416,.F.); +#25411 = FACE_BOUND('',#25412,.F.); +#25412 = EDGE_LOOP('',(#25413,#25414,#25415)); +#25413 = ORIENTED_EDGE('',*,*,#22320,.T.); +#25414 = ORIENTED_EDGE('',*,*,#24330,.T.); +#25415 = ORIENTED_EDGE('',*,*,#24377,.T.); +#25416 = CYLINDRICAL_SURFACE('',#25417,0.15); +#25417 = AXIS2_PLACEMENT_3D('',#25418,#25419,#25420); +#25418 = CARTESIAN_POINT('',(0.,-0.9,0.8)); +#25419 = DIRECTION('',(1.,0.,0.)); +#25420 = DIRECTION('',(0.,0.,-1.)); +#25421 = ADVANCED_FACE('',(#25422),#25427,.F.); +#25422 = FACE_BOUND('',#25423,.F.); +#25423 = EDGE_LOOP('',(#25424,#25425,#25426)); +#25424 = ORIENTED_EDGE('',*,*,#22336,.T.); +#25425 = ORIENTED_EDGE('',*,*,#24385,.T.); +#25426 = ORIENTED_EDGE('',*,*,#24002,.T.); +#25427 = CYLINDRICAL_SURFACE('',#25428,0.15); +#25428 = AXIS2_PLACEMENT_3D('',#25429,#25430,#25431); +#25429 = CARTESIAN_POINT('',(2.09,-0.9,2.7)); +#25430 = DIRECTION('',(1.,0.,0.)); +#25431 = DIRECTION('',(0.,0.,-1.)); +#25432 = ADVANCED_FACE('',(#25433),#25438,.F.); +#25433 = FACE_BOUND('',#25434,.F.); +#25434 = EDGE_LOOP('',(#25435,#25436,#25437)); +#25435 = ORIENTED_EDGE('',*,*,#22278,.T.); +#25436 = ORIENTED_EDGE('',*,*,#22908,.T.); +#25437 = ORIENTED_EDGE('',*,*,#23012,.T.); +#25438 = CYLINDRICAL_SURFACE('',#25439,0.15); +#25439 = AXIS2_PLACEMENT_3D('',#25440,#25441,#25442); +#25440 = CARTESIAN_POINT('',(0.,-0.9,2.7)); +#25441 = DIRECTION('',(1.,0.,0.)); +#25442 = DIRECTION('',(0.,0.,-1.)); +#25443 = ADVANCED_FACE('',(#25444),#25449,.F.); +#25444 = FACE_BOUND('',#25445,.F.); +#25445 = EDGE_LOOP('',(#25446,#25447,#25448)); +#25446 = ORIENTED_EDGE('',*,*,#22210,.T.); +#25447 = ORIENTED_EDGE('',*,*,#23020,.T.); +#25448 = ORIENTED_EDGE('',*,*,#22580,.T.); +#25449 = CYLINDRICAL_SURFACE('',#25450,0.15); +#25450 = AXIS2_PLACEMENT_3D('',#25451,#25452,#25453); +#25451 = CARTESIAN_POINT('',(-2.09,-0.9,0.8)); +#25452 = DIRECTION('',(1.,0.,0.)); +#25453 = DIRECTION('',(0.,0.,-1.)); +#25454 = ADVANCED_FACE('',(#25455),#25461,.T.); +#25455 = FACE_BOUND('',#25456,.T.); +#25456 = EDGE_LOOP('',(#25457,#25458,#25459,#25460)); +#25457 = ORIENTED_EDGE('',*,*,#22252,.F.); +#25458 = ORIENTED_EDGE('',*,*,#21607,.F.); +#25459 = ORIENTED_EDGE('',*,*,#22218,.F.); +#25460 = ORIENTED_EDGE('',*,*,#21206,.F.); +#25461 = CYLINDRICAL_SURFACE('',#25462,0.15); +#25462 = AXIS2_PLACEMENT_3D('',#25463,#25464,#25465); +#25463 = CARTESIAN_POINT('',(-2.09,-1.05,0.)); +#25464 = DIRECTION('',(0.,0.,-1.)); +#25465 = DIRECTION('',(-1.,0.,0.)); +#25466 = ADVANCED_FACE('',(#25467),#25473,.T.); +#25467 = FACE_BOUND('',#25468,.T.); +#25468 = EDGE_LOOP('',(#25469,#25470,#25471,#25472)); +#25469 = ORIENTED_EDGE('',*,*,#22294,.F.); +#25470 = ORIENTED_EDGE('',*,*,#19691,.F.); +#25471 = ORIENTED_EDGE('',*,*,#22344,.F.); +#25472 = ORIENTED_EDGE('',*,*,#21510,.F.); +#25473 = CYLINDRICAL_SURFACE('',#25474,0.15); +#25474 = AXIS2_PLACEMENT_3D('',#25475,#25476,#25477); +#25475 = CARTESIAN_POINT('',(2.09,-1.05,-5.664956351237E-16)); +#25476 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#25477 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#25478 = ADVANCED_FACE('',(#25479),#25504,.F.); +#25479 = FACE_BOUND('',#25480,.T.); +#25480 = EDGE_LOOP('',(#25481,#25482,#25490,#25498)); +#25481 = ORIENTED_EDGE('',*,*,#19851,.T.); +#25482 = ORIENTED_EDGE('',*,*,#25483,.F.); +#25483 = EDGE_CURVE('',#25484,#19854,#25486,.T.); +#25484 = VERTEX_POINT('',#25485); +#25485 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.780846633979)); +#25486 = LINE('',#25487,#25488); +#25487 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.780846633979)); +#25488 = VECTOR('',#25489,1.); +#25489 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25490 = ORIENTED_EDGE('',*,*,#25491,.F.); +#25491 = EDGE_CURVE('',#25492,#25484,#25494,.T.); +#25492 = VERTEX_POINT('',#25493); +#25493 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.769253333212)); +#25494 = LINE('',#25495,#25496); +#25495 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.780846633979)); +#25496 = VECTOR('',#25497,1.); +#25497 = DIRECTION('',(-0.,-0.,1.)); +#25498 = ORIENTED_EDGE('',*,*,#25499,.T.); +#25499 = EDGE_CURVE('',#25492,#19852,#25500,.T.); +#25500 = LINE('',#25501,#25502); +#25501 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.769253333212)); +#25502 = VECTOR('',#25503,1.); +#25503 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25504 = PLANE('',#25505); +#25505 = AXIS2_PLACEMENT_3D('',#25506,#25507,#25508); +#25506 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.780846633979)); +#25507 = DIRECTION('',(0.,-1.,0.)); +#25508 = DIRECTION('',(0.,-0.,-1.)); +#25509 = ADVANCED_FACE('',(#25510),#25528,.F.); +#25510 = FACE_BOUND('',#25511,.T.); +#25511 = EDGE_LOOP('',(#25512,#25513,#25521,#25527)); +#25512 = ORIENTED_EDGE('',*,*,#19893,.T.); +#25513 = ORIENTED_EDGE('',*,*,#25514,.F.); +#25514 = EDGE_CURVE('',#25515,#19886,#25517,.T.); +#25515 = VERTEX_POINT('',#25516); +#25516 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.780846633979)); +#25517 = LINE('',#25518,#25519); +#25518 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.780846633979)); +#25519 = VECTOR('',#25520,1.); +#25520 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25521 = ORIENTED_EDGE('',*,*,#25522,.F.); +#25522 = EDGE_CURVE('',#25484,#25515,#25523,.T.); +#25523 = LINE('',#25524,#25525); +#25524 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.780846633979)); +#25525 = VECTOR('',#25526,1.); +#25526 = DIRECTION('',(-0.,-1.,-5.354273743371E-15)); +#25527 = ORIENTED_EDGE('',*,*,#25483,.T.); +#25528 = PLANE('',#25529); +#25529 = AXIS2_PLACEMENT_3D('',#25530,#25531,#25532); +#25530 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.780846633979)); +#25531 = DIRECTION('',(-2.710505431214E-16,5.354273743371E-15,-1.)); +#25532 = DIRECTION('',(1.757364862017E-47,1.,5.354273743371E-15)); +#25533 = ADVANCED_FACE('',(#25534),#25552,.F.); +#25534 = FACE_BOUND('',#25535,.T.); +#25535 = EDGE_LOOP('',(#25536,#25537,#25545,#25551)); +#25536 = ORIENTED_EDGE('',*,*,#19885,.T.); +#25537 = ORIENTED_EDGE('',*,*,#25538,.F.); +#25538 = EDGE_CURVE('',#25539,#19878,#25541,.T.); +#25539 = VERTEX_POINT('',#25540); +#25540 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.870941657428)); +#25541 = LINE('',#25542,#25543); +#25542 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.870941657428)); +#25543 = VECTOR('',#25544,1.); +#25544 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25545 = ORIENTED_EDGE('',*,*,#25546,.F.); +#25546 = EDGE_CURVE('',#25515,#25539,#25547,.T.); +#25547 = LINE('',#25548,#25549); +#25548 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.870941657428)); +#25549 = VECTOR('',#25550,1.); +#25550 = DIRECTION('',(-0.,-3.610195539053E-15,1.)); +#25551 = ORIENTED_EDGE('',*,*,#25514,.T.); +#25552 = PLANE('',#25553); +#25553 = AXIS2_PLACEMENT_3D('',#25554,#25555,#25556); +#25554 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.870941657428)); +#25555 = DIRECTION('',(-9.785454616347E-31,-1.,-3.610195539053E-15)); +#25556 = DIRECTION('',(0.,3.610195539053E-15,-1.)); +#25557 = ADVANCED_FACE('',(#25558),#25576,.F.); +#25558 = FACE_BOUND('',#25559,.T.); +#25559 = EDGE_LOOP('',(#25560,#25561,#25569,#25575)); +#25560 = ORIENTED_EDGE('',*,*,#19877,.T.); +#25561 = ORIENTED_EDGE('',*,*,#25562,.F.); +#25562 = EDGE_CURVE('',#25563,#19870,#25565,.T.); +#25563 = VERTEX_POINT('',#25564); +#25564 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.870941657428)); +#25565 = LINE('',#25566,#25567); +#25566 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.870941657428)); +#25567 = VECTOR('',#25568,1.); +#25568 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25569 = ORIENTED_EDGE('',*,*,#25570,.F.); +#25570 = EDGE_CURVE('',#25539,#25563,#25571,.T.); +#25571 = LINE('',#25572,#25573); +#25572 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.870941657428)); +#25573 = VECTOR('',#25574,1.); +#25574 = DIRECTION('',(-0.,-1.,-0.)); +#25575 = ORIENTED_EDGE('',*,*,#25538,.T.); +#25576 = PLANE('',#25577); +#25577 = AXIS2_PLACEMENT_3D('',#25578,#25579,#25580); +#25578 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.870941657428)); +#25579 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#25580 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#25581 = ADVANCED_FACE('',(#25582),#25600,.F.); +#25582 = FACE_BOUND('',#25583,.T.); +#25583 = EDGE_LOOP('',(#25584,#25585,#25593,#25599)); +#25584 = ORIENTED_EDGE('',*,*,#19869,.T.); +#25585 = ORIENTED_EDGE('',*,*,#25586,.F.); +#25586 = EDGE_CURVE('',#25587,#19862,#25589,.T.); +#25587 = VERTEX_POINT('',#25588); +#25588 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.769253333212)); +#25589 = LINE('',#25590,#25591); +#25590 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.769253333212)); +#25591 = VECTOR('',#25592,1.); +#25592 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25593 = ORIENTED_EDGE('',*,*,#25594,.F.); +#25594 = EDGE_CURVE('',#25563,#25587,#25595,.T.); +#25595 = LINE('',#25596,#25597); +#25596 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.769253333212)); +#25597 = VECTOR('',#25598,1.); +#25598 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#25599 = ORIENTED_EDGE('',*,*,#25562,.T.); +#25600 = PLANE('',#25601); +#25601 = AXIS2_PLACEMENT_3D('',#25602,#25603,#25604); +#25602 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.769253333212)); +#25603 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#25604 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#25605 = ADVANCED_FACE('',(#25606),#25617,.F.); +#25606 = FACE_BOUND('',#25607,.T.); +#25607 = EDGE_LOOP('',(#25608,#25609,#25610,#25616)); +#25608 = ORIENTED_EDGE('',*,*,#19861,.T.); +#25609 = ORIENTED_EDGE('',*,*,#25499,.F.); +#25610 = ORIENTED_EDGE('',*,*,#25611,.F.); +#25611 = EDGE_CURVE('',#25587,#25492,#25612,.T.); +#25612 = LINE('',#25613,#25614); +#25613 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.769253333212)); +#25614 = VECTOR('',#25615,1.); +#25615 = DIRECTION('',(-0.,1.,4.043605667569E-15)); +#25616 = ORIENTED_EDGE('',*,*,#25586,.T.); +#25617 = PLANE('',#25618); +#25618 = AXIS2_PLACEMENT_3D('',#25619,#25620,#25621); +#25619 = CARTESIAN_POINT('',(2.241,-0.209989049485,1.769253333212)); +#25620 = DIRECTION('',(2.710505431214E-16,-4.043605667569E-15,1.)); +#25621 = DIRECTION('',(4.165065169158E-47,-1.,-4.043605667569E-15)); +#25622 = ADVANCED_FACE('',(#25623),#25631,.F.); +#25623 = FACE_BOUND('',#25624,.T.); +#25624 = EDGE_LOOP('',(#25625,#25626,#25627,#25628,#25629,#25630)); +#25625 = ORIENTED_EDGE('',*,*,#25491,.T.); +#25626 = ORIENTED_EDGE('',*,*,#25522,.T.); +#25627 = ORIENTED_EDGE('',*,*,#25546,.T.); +#25628 = ORIENTED_EDGE('',*,*,#25570,.T.); +#25629 = ORIENTED_EDGE('',*,*,#25594,.T.); +#25630 = ORIENTED_EDGE('',*,*,#25611,.T.); +#25631 = PLANE('',#25632); +#25632 = AXIS2_PLACEMENT_3D('',#25633,#25634,#25635); +#25633 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#25634 = DIRECTION('',(-1.,0.,-0.)); +#25635 = DIRECTION('',(0.,0.,1.)); +#25636 = ADVANCED_FACE('',(#25637),#25663,.F.); +#25637 = FACE_BOUND('',#25638,.F.); +#25638 = EDGE_LOOP('',(#25639,#25647,#25656,#25662)); +#25639 = ORIENTED_EDGE('',*,*,#25640,.F.); +#25640 = EDGE_CURVE('',#25641,#19548,#25643,.T.); +#25641 = VERTEX_POINT('',#25642); +#25642 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#25643 = LINE('',#25644,#25645); +#25644 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#25645 = VECTOR('',#25646,1.); +#25646 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25647 = ORIENTED_EDGE('',*,*,#25648,.T.); +#25648 = EDGE_CURVE('',#25641,#25649,#25651,.T.); +#25649 = VERTEX_POINT('',#25650); +#25650 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.773464352773)); +#25651 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25652,#25653,#25654,#25655), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25652 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#25653 = CARTESIAN_POINT('',(2.241,-0.14656381659,1.76753773265)); +#25654 = CARTESIAN_POINT('',(2.241,-0.137180001395,1.769513272691)); +#25655 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.773464352773)); +#25656 = ORIENTED_EDGE('',*,*,#25657,.T.); +#25657 = EDGE_CURVE('',#25649,#19550,#25658,.T.); +#25658 = LINE('',#25659,#25660); +#25659 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.773464352773)); +#25660 = VECTOR('',#25661,1.); +#25661 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25662 = ORIENTED_EDGE('',*,*,#19547,.F.); +#25663 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25664,#25665) + ,(#25666,#25667) + ,(#25668,#25669) + ,(#25670,#25671 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25664 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#25665 = CARTESIAN_POINT('',(2.24,-0.157845189982,1.76753773265)); +#25666 = CARTESIAN_POINT('',(2.241,-0.14656381659,1.76753773265)); +#25667 = CARTESIAN_POINT('',(2.24,-0.14656381659,1.76753773265)); +#25668 = CARTESIAN_POINT('',(2.241,-0.137180001395,1.769513272691)); +#25669 = CARTESIAN_POINT('',(2.24,-0.137180001395,1.769513272691)); +#25670 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.773464352773)); +#25671 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.773464352773)); +#25672 = ADVANCED_FACE('',(#25673),#25691,.F.); +#25673 = FACE_BOUND('',#25674,.T.); +#25674 = EDGE_LOOP('',(#25675,#25676,#25684,#25690)); +#25675 = ORIENTED_EDGE('',*,*,#19665,.T.); +#25676 = ORIENTED_EDGE('',*,*,#25677,.F.); +#25677 = EDGE_CURVE('',#25678,#19657,#25680,.T.); +#25678 = VERTEX_POINT('',#25679); +#25679 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25680 = LINE('',#25681,#25682); +#25681 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25682 = VECTOR('',#25683,1.); +#25683 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25684 = ORIENTED_EDGE('',*,*,#25685,.F.); +#25685 = EDGE_CURVE('',#25649,#25678,#25686,.T.); +#25686 = LINE('',#25687,#25688); +#25687 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25688 = VECTOR('',#25689,1.); +#25689 = DIRECTION('',(-0.,-8.617725714965E-15,1.)); +#25690 = ORIENTED_EDGE('',*,*,#25657,.T.); +#25691 = PLANE('',#25692); +#25692 = AXIS2_PLACEMENT_3D('',#25693,#25694,#25695); +#25693 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25694 = DIRECTION('',(-2.335839235512E-30,-1.,-8.617725714965E-15)); +#25695 = DIRECTION('',(0.,8.617725714965E-15,-1.)); +#25696 = ADVANCED_FACE('',(#25697),#25716,.F.); +#25697 = FACE_BOUND('',#25698,.F.); +#25698 = EDGE_LOOP('',(#25699,#25700,#25709,#25715)); +#25699 = ORIENTED_EDGE('',*,*,#25677,.F.); +#25700 = ORIENTED_EDGE('',*,*,#25701,.T.); +#25701 = EDGE_CURVE('',#25678,#25702,#25704,.T.); +#25702 = VERTEX_POINT('',#25703); +#25703 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25704 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25705,#25706,#25707,#25708), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#25705 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25706 = CARTESIAN_POINT('',(2.241,-0.137128013499,1.781522476625)); +#25707 = CARTESIAN_POINT('',(2.241,-0.145887973944,1.779235009209)); +#25708 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25709 = ORIENTED_EDGE('',*,*,#25710,.T.); +#25710 = EDGE_CURVE('',#25702,#19648,#25711,.T.); +#25711 = LINE('',#25712,#25713); +#25712 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25713 = VECTOR('',#25714,1.); +#25714 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25715 = ORIENTED_EDGE('',*,*,#19656,.F.); +#25716 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25717,#25718) + ,(#25719,#25720) + ,(#25721,#25722) + ,(#25723,#25724 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25717 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.786045423561)); +#25718 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.786045423561)); +#25719 = CARTESIAN_POINT('',(2.241,-0.137128013499,1.781522476625)); +#25720 = CARTESIAN_POINT('',(2.24,-0.137128013499,1.781522476625)); +#25721 = CARTESIAN_POINT('',(2.241,-0.145887973944,1.779235009209)); +#25722 = CARTESIAN_POINT('',(2.24,-0.145887973944,1.779235009209)); +#25723 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25724 = CARTESIAN_POINT('',(2.24,-0.155947631785,1.779235009209)); +#25725 = ADVANCED_FACE('',(#25726),#25745,.F.); +#25726 = FACE_BOUND('',#25727,.F.); +#25727 = EDGE_LOOP('',(#25728,#25729,#25738,#25744)); +#25728 = ORIENTED_EDGE('',*,*,#25710,.F.); +#25729 = ORIENTED_EDGE('',*,*,#25730,.T.); +#25730 = EDGE_CURVE('',#25702,#25731,#25733,.T.); +#25731 = VERTEX_POINT('',#25732); +#25732 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25733 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25734,#25735,#25736,#25737), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#25734 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25735 = CARTESIAN_POINT('',(2.241,-0.166709126218,1.779235009209)); +#25736 = CARTESIAN_POINT('',(2.241,-0.175417098768,1.78282217402)); +#25737 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25738 = ORIENTED_EDGE('',*,*,#25739,.T.); +#25739 = EDGE_CURVE('',#25731,#19639,#25740,.T.); +#25740 = LINE('',#25741,#25742); +#25741 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25742 = VECTOR('',#25743,1.); +#25743 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25744 = ORIENTED_EDGE('',*,*,#19647,.F.); +#25745 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25746,#25747) + ,(#25748,#25749) + ,(#25750,#25751) + ,(#25752,#25753 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25746 = CARTESIAN_POINT('',(2.241,-0.155947631785,1.779235009209)); +#25747 = CARTESIAN_POINT('',(2.24,-0.155947631785,1.779235009209)); +#25748 = CARTESIAN_POINT('',(2.241,-0.166709126218,1.779235009209)); +#25749 = CARTESIAN_POINT('',(2.24,-0.166709126218,1.779235009209)); +#25750 = CARTESIAN_POINT('',(2.241,-0.175417098768,1.78282217402)); +#25751 = CARTESIAN_POINT('',(2.24,-0.175417098768,1.78282217402)); +#25752 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25753 = CARTESIAN_POINT('',(2.24,-0.182071549432,1.789944515747)); +#25754 = ADVANCED_FACE('',(#25755),#25774,.F.); +#25755 = FACE_BOUND('',#25756,.F.); +#25756 = EDGE_LOOP('',(#25757,#25758,#25767,#25773)); +#25757 = ORIENTED_EDGE('',*,*,#25739,.F.); +#25758 = ORIENTED_EDGE('',*,*,#25759,.T.); +#25759 = EDGE_CURVE('',#25731,#25760,#25762,.T.); +#25760 = VERTEX_POINT('',#25761); +#25761 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25762 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25763,#25764,#25765,#25766), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#25763 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25764 = CARTESIAN_POINT('',(2.241,-0.188726000097,1.79711884537)); +#25765 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.806788593992)); +#25766 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25767 = ORIENTED_EDGE('',*,*,#25768,.T.); +#25768 = EDGE_CURVE('',#25760,#19630,#25769,.T.); +#25769 = LINE('',#25770,#25771); +#25770 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25771 = VECTOR('',#25772,1.); +#25772 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25773 = ORIENTED_EDGE('',*,*,#19638,.F.); +#25774 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25775,#25776) + ,(#25777,#25778) + ,(#25779,#25780) + ,(#25781,#25782 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25775 = CARTESIAN_POINT('',(2.241,-0.182071549432,1.789944515747)); +#25776 = CARTESIAN_POINT('',(2.24,-0.182071549432,1.789944515747)); +#25777 = CARTESIAN_POINT('',(2.241,-0.188726000097,1.79711884537)); +#25778 = CARTESIAN_POINT('',(2.24,-0.188726000097,1.79711884537)); +#25779 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.806788593992)); +#25780 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.806788593992)); +#25781 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25782 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.818953761612)); +#25783 = ADVANCED_FACE('',(#25784),#25803,.F.); +#25784 = FACE_BOUND('',#25785,.F.); +#25785 = EDGE_LOOP('',(#25786,#25787,#25796,#25802)); +#25786 = ORIENTED_EDGE('',*,*,#25768,.F.); +#25787 = ORIENTED_EDGE('',*,*,#25788,.T.); +#25788 = EDGE_CURVE('',#25760,#25789,#25791,.T.); +#25789 = VERTEX_POINT('',#25790); +#25790 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25791 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25792,#25793,#25794,#25795), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#25792 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25793 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.831742783983)); +#25794 = CARTESIAN_POINT('',(2.241,-0.188492054565,1.841932411563)); +#25795 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25796 = ORIENTED_EDGE('',*,*,#25797,.T.); +#25797 = EDGE_CURVE('',#25789,#19621,#25798,.T.); +#25798 = LINE('',#25799,#25800); +#25799 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25800 = VECTOR('',#25801,1.); +#25801 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25802 = ORIENTED_EDGE('',*,*,#19629,.F.); +#25803 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25804,#25805) + ,(#25806,#25807) + ,(#25808,#25809) + ,(#25810,#25811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25804 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.818953761612)); +#25805 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.818953761612)); +#25806 = CARTESIAN_POINT('',(2.241,-0.192053225429,1.831742783983)); +#25807 = CARTESIAN_POINT('',(2.24,-0.192053225429,1.831742783983)); +#25808 = CARTESIAN_POINT('',(2.241,-0.188492054565,1.841932411563)); +#25809 = CARTESIAN_POINT('',(2.24,-0.188492054565,1.841932411563)); +#25810 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25811 = CARTESIAN_POINT('',(2.24,-0.181369712838,1.849522644352)); +#25812 = ADVANCED_FACE('',(#25813),#25832,.F.); +#25813 = FACE_BOUND('',#25814,.F.); +#25814 = EDGE_LOOP('',(#25815,#25816,#25825,#25831)); +#25815 = ORIENTED_EDGE('',*,*,#25797,.F.); +#25816 = ORIENTED_EDGE('',*,*,#25817,.T.); +#25817 = EDGE_CURVE('',#25789,#25818,#25820,.T.); +#25818 = VERTEX_POINT('',#25819); +#25819 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25820 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25821,#25822,#25823,#25824), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#25821 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25822 = CARTESIAN_POINT('',(2.241,-0.174221377164,1.857060889245)); +#25823 = CARTESIAN_POINT('',(2.241,-0.164993525656,1.860804017744)); +#25824 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25825 = ORIENTED_EDGE('',*,*,#25826,.T.); +#25826 = EDGE_CURVE('',#25818,#19612,#25827,.T.); +#25827 = LINE('',#25828,#25829); +#25828 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25829 = VECTOR('',#25830,1.); +#25830 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25831 = ORIENTED_EDGE('',*,*,#19620,.F.); +#25832 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25833,#25834) + ,(#25835,#25836) + ,(#25837,#25838) + ,(#25839,#25840 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25833 = CARTESIAN_POINT('',(2.241,-0.181369712838,1.849522644352)); +#25834 = CARTESIAN_POINT('',(2.24,-0.181369712838,1.849522644352)); +#25835 = CARTESIAN_POINT('',(2.241,-0.174221377164,1.857060889245)); +#25836 = CARTESIAN_POINT('',(2.24,-0.174221377164,1.857060889245)); +#25837 = CARTESIAN_POINT('',(2.241,-0.164993525656,1.860804017744)); +#25838 = CARTESIAN_POINT('',(2.24,-0.164993525656,1.860804017744)); +#25839 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25840 = CARTESIAN_POINT('',(2.24,-0.153660164369,1.860804017744)); +#25841 = ADVANCED_FACE('',(#25842),#25861,.F.); +#25842 = FACE_BOUND('',#25843,.F.); +#25843 = EDGE_LOOP('',(#25844,#25845,#25854,#25860)); +#25844 = ORIENTED_EDGE('',*,*,#25826,.F.); +#25845 = ORIENTED_EDGE('',*,*,#25846,.T.); +#25846 = EDGE_CURVE('',#25818,#25847,#25849,.T.); +#25847 = VERTEX_POINT('',#25848); +#25848 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.85477342183)); +#25849 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25850,#25851,#25852,#25853), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#25850 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25851 = CARTESIAN_POINT('',(2.241,-0.14495219182,1.860804017744)); +#25852 = CARTESIAN_POINT('',(2.241,-0.136972049812,1.858828477703)); +#25853 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.85477342183)); +#25854 = ORIENTED_EDGE('',*,*,#25855,.T.); +#25855 = EDGE_CURVE('',#25847,#19604,#25856,.T.); +#25856 = LINE('',#25857,#25858); +#25857 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.85477342183)); +#25858 = VECTOR('',#25859,1.); +#25859 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25860 = ORIENTED_EDGE('',*,*,#19611,.F.); +#25861 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25862,#25863) + ,(#25864,#25865) + ,(#25866,#25867) + ,(#25868,#25869 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25862 = CARTESIAN_POINT('',(2.241,-0.153660164369,1.860804017744)); +#25863 = CARTESIAN_POINT('',(2.24,-0.153660164369,1.860804017744)); +#25864 = CARTESIAN_POINT('',(2.241,-0.14495219182,1.860804017744)); +#25865 = CARTESIAN_POINT('',(2.24,-0.14495219182,1.860804017744)); +#25866 = CARTESIAN_POINT('',(2.241,-0.136972049812,1.858828477703)); +#25867 = CARTESIAN_POINT('',(2.24,-0.136972049812,1.858828477703)); +#25868 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.85477342183)); +#25869 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.85477342183)); +#25870 = ADVANCED_FACE('',(#25871),#25889,.F.); +#25871 = FACE_BOUND('',#25872,.T.); +#25872 = EDGE_LOOP('',(#25873,#25874,#25882,#25888)); +#25873 = ORIENTED_EDGE('',*,*,#19603,.T.); +#25874 = ORIENTED_EDGE('',*,*,#25875,.F.); +#25875 = EDGE_CURVE('',#25876,#19595,#25878,.T.); +#25876 = VERTEX_POINT('',#25877); +#25877 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25878 = LINE('',#25879,#25880); +#25879 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25880 = VECTOR('',#25881,1.); +#25881 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25882 = ORIENTED_EDGE('',*,*,#25883,.F.); +#25883 = EDGE_CURVE('',#25847,#25876,#25884,.T.); +#25884 = LINE('',#25885,#25886); +#25885 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25886 = VECTOR('',#25887,1.); +#25887 = DIRECTION('',(-0.,-0.,1.)); +#25888 = ORIENTED_EDGE('',*,*,#25855,.T.); +#25889 = PLANE('',#25890); +#25890 = AXIS2_PLACEMENT_3D('',#25891,#25892,#25893); +#25891 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25892 = DIRECTION('',(0.,-1.,0.)); +#25893 = DIRECTION('',(0.,-0.,-1.)); +#25894 = ADVANCED_FACE('',(#25895),#25914,.F.); +#25895 = FACE_BOUND('',#25896,.F.); +#25896 = EDGE_LOOP('',(#25897,#25898,#25907,#25913)); +#25897 = ORIENTED_EDGE('',*,*,#25875,.F.); +#25898 = ORIENTED_EDGE('',*,*,#25899,.T.); +#25899 = EDGE_CURVE('',#25876,#25900,#25902,.T.); +#25900 = VERTEX_POINT('',#25901); +#25901 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25902 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25903,#25904,#25905,#25906), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#25903 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25904 = CARTESIAN_POINT('',(2.241,-0.136036267687,1.871253584803)); +#25905 = CARTESIAN_POINT('',(2.241,-0.144068397591,1.87265725799)); +#25906 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25907 = ORIENTED_EDGE('',*,*,#25908,.T.); +#25908 = EDGE_CURVE('',#25900,#19586,#25909,.T.); +#25909 = LINE('',#25910,#25911); +#25910 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25911 = VECTOR('',#25912,1.); +#25912 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25913 = ORIENTED_EDGE('',*,*,#19594,.F.); +#25914 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25915,#25916) + ,(#25917,#25918) + ,(#25919,#25920) + ,(#25921,#25922 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25915 = CARTESIAN_POINT('',(2.241,-0.129693744397,1.868498226325)); +#25916 = CARTESIAN_POINT('',(2.24,-0.129693744397,1.868498226325)); +#25917 = CARTESIAN_POINT('',(2.241,-0.136036267687,1.871253584803)); +#25918 = CARTESIAN_POINT('',(2.24,-0.136036267687,1.871253584803)); +#25919 = CARTESIAN_POINT('',(2.241,-0.144068397591,1.87265725799)); +#25920 = CARTESIAN_POINT('',(2.24,-0.144068397591,1.87265725799)); +#25921 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25922 = CARTESIAN_POINT('',(2.24,-0.153790134108,1.87265725799)); +#25923 = ADVANCED_FACE('',(#25924),#25943,.F.); +#25924 = FACE_BOUND('',#25925,.F.); +#25925 = EDGE_LOOP('',(#25926,#25927,#25936,#25942)); +#25926 = ORIENTED_EDGE('',*,*,#25908,.F.); +#25927 = ORIENTED_EDGE('',*,*,#25928,.T.); +#25928 = EDGE_CURVE('',#25900,#25929,#25931,.T.); +#25929 = VERTEX_POINT('',#25930); +#25930 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25931 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25932,#25933,#25934,#25935), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#25932 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25933 = CARTESIAN_POINT('',(2.241,-0.168892617843,1.87265725799)); +#25934 = CARTESIAN_POINT('',(2.241,-0.181343718891,1.867666419992)); +#25935 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25936 = ORIENTED_EDGE('',*,*,#25937,.T.); +#25937 = EDGE_CURVE('',#25929,#19577,#25938,.T.); +#25938 = LINE('',#25939,#25940); +#25939 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25940 = VECTOR('',#25941,1.); +#25941 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25942 = ORIENTED_EDGE('',*,*,#19585,.F.); +#25943 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25944,#25945) + ,(#25946,#25947) + ,(#25948,#25949) + ,(#25950,#25951 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25944 = CARTESIAN_POINT('',(2.241,-0.153790134108,1.87265725799)); +#25945 = CARTESIAN_POINT('',(2.24,-0.153790134108,1.87265725799)); +#25946 = CARTESIAN_POINT('',(2.241,-0.168892617843,1.87265725799)); +#25947 = CARTESIAN_POINT('',(2.24,-0.168892617843,1.87265725799)); +#25948 = CARTESIAN_POINT('',(2.241,-0.181343718891,1.867666419992)); +#25949 = CARTESIAN_POINT('',(2.24,-0.181343718891,1.867666419992)); +#25950 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25951 = CARTESIAN_POINT('',(2.24,-0.191143437252,1.857684743995)); +#25952 = ADVANCED_FACE('',(#25953),#25972,.F.); +#25953 = FACE_BOUND('',#25954,.F.); +#25954 = EDGE_LOOP('',(#25955,#25956,#25965,#25971)); +#25955 = ORIENTED_EDGE('',*,*,#25937,.F.); +#25956 = ORIENTED_EDGE('',*,*,#25957,.T.); +#25957 = EDGE_CURVE('',#25929,#25958,#25960,.T.); +#25958 = VERTEX_POINT('',#25959); +#25959 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#25960 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25961,#25962,#25963,#25964), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#25961 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25962 = CARTESIAN_POINT('',(2.241,-0.200943155613,1.847703067998)); +#25963 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.834550130357)); +#25964 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#25965 = ORIENTED_EDGE('',*,*,#25966,.T.); +#25966 = EDGE_CURVE('',#25958,#19568,#25967,.T.); +#25967 = LINE('',#25968,#25969); +#25968 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#25969 = VECTOR('',#25970,1.); +#25970 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#25971 = ORIENTED_EDGE('',*,*,#19576,.F.); +#25972 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#25973,#25974) + ,(#25975,#25976) + ,(#25977,#25978) + ,(#25979,#25980 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#25973 = CARTESIAN_POINT('',(2.241,-0.191143437252,1.857684743995)); +#25974 = CARTESIAN_POINT('',(2.24,-0.191143437252,1.857684743995)); +#25975 = CARTESIAN_POINT('',(2.241,-0.200943155613,1.847703067998)); +#25976 = CARTESIAN_POINT('',(2.24,-0.200943155613,1.847703067998)); +#25977 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.834550130357)); +#25978 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.834550130357)); +#25979 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#25980 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.818173943175)); +#25981 = ADVANCED_FACE('',(#25982),#26001,.F.); +#25982 = FACE_BOUND('',#25983,.F.); +#25983 = EDGE_LOOP('',(#25984,#25985,#25994,#26000)); +#25984 = ORIENTED_EDGE('',*,*,#25966,.F.); +#25985 = ORIENTED_EDGE('',*,*,#25986,.T.); +#25986 = EDGE_CURVE('',#25958,#25987,#25989,.T.); +#25987 = VERTEX_POINT('',#25988); +#25988 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#25989 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#25990,#25991,#25992,#25993), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#25990 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#25991 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.802941489701)); +#25992 = CARTESIAN_POINT('',(2.241,-0.201489028519,1.790672346288)); +#25993 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#25994 = ORIENTED_EDGE('',*,*,#25995,.T.); +#25995 = EDGE_CURVE('',#25987,#19559,#25996,.T.); +#25996 = LINE('',#25997,#25998); +#25997 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#25998 = VECTOR('',#25999,1.); +#25999 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26000 = ORIENTED_EDGE('',*,*,#19567,.F.); +#26001 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26002,#26003) + ,(#26004,#26005) + ,(#26006,#26007) + ,(#26008,#26009 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26002 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.818173943175)); +#26003 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.818173943175)); +#26004 = CARTESIAN_POINT('',(2.241,-0.20583001782,1.802941489701)); +#26005 = CARTESIAN_POINT('',(2.24,-0.20583001782,1.802941489701)); +#26006 = CARTESIAN_POINT('',(2.241,-0.201489028519,1.790672346288)); +#26007 = CARTESIAN_POINT('',(2.24,-0.201489028519,1.790672346288)); +#26008 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#26009 = CARTESIAN_POINT('',(2.24,-0.19278105597,1.781418500833)); +#26010 = ADVANCED_FACE('',(#26011),#26023,.F.); +#26011 = FACE_BOUND('',#26012,.F.); +#26012 = EDGE_LOOP('',(#26013,#26014,#26021,#26022)); +#26013 = ORIENTED_EDGE('',*,*,#25995,.F.); +#26014 = ORIENTED_EDGE('',*,*,#26015,.T.); +#26015 = EDGE_CURVE('',#25987,#25641,#26016,.T.); +#26016 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26017,#26018,#26019,#26020), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#26017 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#26018 = CARTESIAN_POINT('',(2.241,-0.184073083421,1.772164655378)); +#26019 = CARTESIAN_POINT('',(2.241,-0.172427794758,1.76753773265)); +#26020 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#26021 = ORIENTED_EDGE('',*,*,#25640,.T.); +#26022 = ORIENTED_EDGE('',*,*,#19558,.F.); +#26023 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26024,#26025) + ,(#26026,#26027) + ,(#26028,#26029) + ,(#26030,#26031 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26024 = CARTESIAN_POINT('',(2.241,-0.19278105597,1.781418500833)); +#26025 = CARTESIAN_POINT('',(2.24,-0.19278105597,1.781418500833)); +#26026 = CARTESIAN_POINT('',(2.241,-0.184073083421,1.772164655378)); +#26027 = CARTESIAN_POINT('',(2.24,-0.184073083421,1.772164655378)); +#26028 = CARTESIAN_POINT('',(2.241,-0.172427794758,1.76753773265)); +#26029 = CARTESIAN_POINT('',(2.24,-0.172427794758,1.76753773265)); +#26030 = CARTESIAN_POINT('',(2.241,-0.157845189982,1.76753773265)); +#26031 = CARTESIAN_POINT('',(2.24,-0.157845189982,1.76753773265)); +#26032 = ADVANCED_FACE('',(#26033),#26049,.T.); +#26033 = FACE_BOUND('',#26034,.T.); +#26034 = EDGE_LOOP('',(#26035,#26036,#26037,#26038,#26039,#26040,#26041, + #26042,#26043,#26044,#26045,#26046,#26047,#26048)); +#26035 = ORIENTED_EDGE('',*,*,#25648,.T.); +#26036 = ORIENTED_EDGE('',*,*,#25685,.T.); +#26037 = ORIENTED_EDGE('',*,*,#25701,.T.); +#26038 = ORIENTED_EDGE('',*,*,#25730,.T.); +#26039 = ORIENTED_EDGE('',*,*,#25759,.T.); +#26040 = ORIENTED_EDGE('',*,*,#25788,.T.); +#26041 = ORIENTED_EDGE('',*,*,#25817,.T.); +#26042 = ORIENTED_EDGE('',*,*,#25846,.T.); +#26043 = ORIENTED_EDGE('',*,*,#25883,.T.); +#26044 = ORIENTED_EDGE('',*,*,#25899,.T.); +#26045 = ORIENTED_EDGE('',*,*,#25928,.T.); +#26046 = ORIENTED_EDGE('',*,*,#25957,.T.); +#26047 = ORIENTED_EDGE('',*,*,#25986,.T.); +#26048 = ORIENTED_EDGE('',*,*,#26015,.T.); +#26049 = PLANE('',#26050); +#26050 = AXIS2_PLACEMENT_3D('',#26051,#26052,#26053); +#26051 = CARTESIAN_POINT('',(2.241,-0.142346298542,1.769019387681)); +#26052 = DIRECTION('',(1.,0.,0.)); +#26053 = DIRECTION('',(0.,0.,-1.)); +#26054 = ADVANCED_FACE('',(#26055),#26080,.F.); +#26055 = FACE_BOUND('',#26056,.T.); +#26056 = EDGE_LOOP('',(#26057,#26058,#26066,#26074)); +#26057 = ORIENTED_EDGE('',*,*,#19901,.T.); +#26058 = ORIENTED_EDGE('',*,*,#26059,.F.); +#26059 = EDGE_CURVE('',#26060,#19904,#26062,.T.); +#26060 = VERTEX_POINT('',#26061); +#26061 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.780846633979)); +#26062 = LINE('',#26063,#26064); +#26063 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.780846633979)); +#26064 = VECTOR('',#26065,1.); +#26065 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26066 = ORIENTED_EDGE('',*,*,#26067,.F.); +#26067 = EDGE_CURVE('',#26068,#26060,#26070,.T.); +#26068 = VERTEX_POINT('',#26069); +#26069 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.769253333212)); +#26070 = LINE('',#26071,#26072); +#26071 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.780846633979)); +#26072 = VECTOR('',#26073,1.); +#26073 = DIRECTION('',(-0.,-0.,1.)); +#26074 = ORIENTED_EDGE('',*,*,#26075,.T.); +#26075 = EDGE_CURVE('',#26068,#19902,#26076,.T.); +#26076 = LINE('',#26077,#26078); +#26077 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.769253333212)); +#26078 = VECTOR('',#26079,1.); +#26079 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26080 = PLANE('',#26081); +#26081 = AXIS2_PLACEMENT_3D('',#26082,#26083,#26084); +#26082 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.780846633979)); +#26083 = DIRECTION('',(0.,-1.,0.)); +#26084 = DIRECTION('',(0.,-0.,-1.)); +#26085 = ADVANCED_FACE('',(#26086),#26104,.F.); +#26086 = FACE_BOUND('',#26087,.T.); +#26087 = EDGE_LOOP('',(#26088,#26089,#26097,#26103)); +#26088 = ORIENTED_EDGE('',*,*,#19991,.T.); +#26089 = ORIENTED_EDGE('',*,*,#26090,.F.); +#26090 = EDGE_CURVE('',#26091,#19984,#26093,.T.); +#26091 = VERTEX_POINT('',#26092); +#26092 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.780846633979)); +#26093 = LINE('',#26094,#26095); +#26094 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.780846633979)); +#26095 = VECTOR('',#26096,1.); +#26096 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26097 = ORIENTED_EDGE('',*,*,#26098,.F.); +#26098 = EDGE_CURVE('',#26060,#26091,#26099,.T.); +#26099 = LINE('',#26100,#26101); +#26100 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.780846633979)); +#26101 = VECTOR('',#26102,1.); +#26102 = DIRECTION('',(-0.,-1.,-0.)); +#26103 = ORIENTED_EDGE('',*,*,#26059,.T.); +#26104 = PLANE('',#26105); +#26105 = AXIS2_PLACEMENT_3D('',#26106,#26107,#26108); +#26106 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.780846633979)); +#26107 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#26108 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#26109 = ADVANCED_FACE('',(#26110),#26128,.F.); +#26110 = FACE_BOUND('',#26111,.T.); +#26111 = EDGE_LOOP('',(#26112,#26113,#26121,#26127)); +#26112 = ORIENTED_EDGE('',*,*,#19983,.T.); +#26113 = ORIENTED_EDGE('',*,*,#26114,.F.); +#26114 = EDGE_CURVE('',#26115,#19976,#26117,.T.); +#26115 = VERTEX_POINT('',#26116); +#26116 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.815054669426)); +#26117 = LINE('',#26118,#26119); +#26118 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.815054669426)); +#26119 = VECTOR('',#26120,1.); +#26120 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26121 = ORIENTED_EDGE('',*,*,#26122,.F.); +#26122 = EDGE_CURVE('',#26091,#26115,#26123,.T.); +#26123 = LINE('',#26124,#26125); +#26124 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.815054669426)); +#26125 = VECTOR('',#26126,1.); +#26126 = DIRECTION('',(-0.,-6.338874234249E-15,1.)); +#26127 = ORIENTED_EDGE('',*,*,#26090,.T.); +#26128 = PLANE('',#26129); +#26129 = AXIS2_PLACEMENT_3D('',#26130,#26131,#26132); +#26130 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.815054669426)); +#26131 = DIRECTION('',(-1.718155303971E-30,-1.,-6.338874234249E-15)); +#26132 = DIRECTION('',(0.,6.338874234249E-15,-1.)); +#26133 = ADVANCED_FACE('',(#26134),#26152,.F.); +#26134 = FACE_BOUND('',#26135,.T.); +#26135 = EDGE_LOOP('',(#26136,#26137,#26145,#26151)); +#26136 = ORIENTED_EDGE('',*,*,#19975,.T.); +#26137 = ORIENTED_EDGE('',*,*,#26138,.F.); +#26138 = EDGE_CURVE('',#26139,#19968,#26141,.T.); +#26139 = VERTEX_POINT('',#26140); +#26140 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.815054669426)); +#26141 = LINE('',#26142,#26143); +#26142 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.815054669426)); +#26143 = VECTOR('',#26144,1.); +#26144 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26145 = ORIENTED_EDGE('',*,*,#26146,.F.); +#26146 = EDGE_CURVE('',#26115,#26139,#26147,.T.); +#26147 = LINE('',#26148,#26149); +#26148 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.815054669426)); +#26149 = VECTOR('',#26150,1.); +#26150 = DIRECTION('',(-0.,1.,-0.)); +#26151 = ORIENTED_EDGE('',*,*,#26114,.T.); +#26152 = PLANE('',#26153); +#26153 = AXIS2_PLACEMENT_3D('',#26154,#26155,#26156); +#26154 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.815054669426)); +#26155 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#26156 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#26157 = ADVANCED_FACE('',(#26158),#26176,.F.); +#26158 = FACE_BOUND('',#26159,.T.); +#26159 = EDGE_LOOP('',(#26160,#26161,#26169,#26175)); +#26160 = ORIENTED_EDGE('',*,*,#19967,.T.); +#26161 = ORIENTED_EDGE('',*,*,#26162,.F.); +#26162 = EDGE_CURVE('',#26163,#19960,#26165,.T.); +#26163 = VERTEX_POINT('',#26164); +#26164 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.826699958089)); +#26165 = LINE('',#26166,#26167); +#26166 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.826699958089)); +#26167 = VECTOR('',#26168,1.); +#26168 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26169 = ORIENTED_EDGE('',*,*,#26170,.F.); +#26170 = EDGE_CURVE('',#26139,#26163,#26171,.T.); +#26171 = LINE('',#26172,#26173); +#26172 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.826699958089)); +#26173 = VECTOR('',#26174,1.); +#26174 = DIRECTION('',(-0.,-0.,1.)); +#26175 = ORIENTED_EDGE('',*,*,#26138,.T.); +#26176 = PLANE('',#26177); +#26177 = AXIS2_PLACEMENT_3D('',#26178,#26179,#26180); +#26178 = CARTESIAN_POINT('',(2.241,-5.984800636912E-02,1.826699958089)); +#26179 = DIRECTION('',(0.,-1.,0.)); +#26180 = DIRECTION('',(0.,-0.,-1.)); +#26181 = ADVANCED_FACE('',(#26182),#26200,.F.); +#26182 = FACE_BOUND('',#26183,.T.); +#26183 = EDGE_LOOP('',(#26184,#26185,#26193,#26199)); +#26184 = ORIENTED_EDGE('',*,*,#19959,.T.); +#26185 = ORIENTED_EDGE('',*,*,#26186,.F.); +#26186 = EDGE_CURVE('',#26187,#19952,#26189,.T.); +#26187 = VERTEX_POINT('',#26188); +#26188 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.826699958089)); +#26189 = LINE('',#26190,#26191); +#26190 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.826699958089)); +#26191 = VECTOR('',#26192,1.); +#26192 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26193 = ORIENTED_EDGE('',*,*,#26194,.F.); +#26194 = EDGE_CURVE('',#26163,#26187,#26195,.T.); +#26195 = LINE('',#26196,#26197); +#26196 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.826699958089)); +#26197 = VECTOR('',#26198,1.); +#26198 = DIRECTION('',(-0.,-1.,-0.)); +#26199 = ORIENTED_EDGE('',*,*,#26162,.T.); +#26200 = PLANE('',#26201); +#26201 = AXIS2_PLACEMENT_3D('',#26202,#26203,#26204); +#26202 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.826699958089)); +#26203 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#26204 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#26205 = ADVANCED_FACE('',(#26206),#26224,.F.); +#26206 = FACE_BOUND('',#26207,.T.); +#26207 = EDGE_LOOP('',(#26208,#26209,#26217,#26223)); +#26208 = ORIENTED_EDGE('',*,*,#19951,.T.); +#26209 = ORIENTED_EDGE('',*,*,#26210,.F.); +#26210 = EDGE_CURVE('',#26211,#19944,#26213,.T.); +#26211 = VERTEX_POINT('',#26212); +#26212 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.85924438087)); +#26213 = LINE('',#26214,#26215); +#26214 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.85924438087)); +#26215 = VECTOR('',#26216,1.); +#26216 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26217 = ORIENTED_EDGE('',*,*,#26218,.F.); +#26218 = EDGE_CURVE('',#26187,#26211,#26219,.T.); +#26219 = LINE('',#26220,#26221); +#26220 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.85924438087)); +#26221 = VECTOR('',#26222,1.); +#26222 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#26223 = ORIENTED_EDGE('',*,*,#26186,.T.); +#26224 = PLANE('',#26225); +#26225 = AXIS2_PLACEMENT_3D('',#26226,#26227,#26228); +#26226 = CARTESIAN_POINT('',(2.241,-9.62135394921E-02,1.85924438087)); +#26227 = DIRECTION('',(-9.029921645333E-31,-1.,-3.331453071942E-15)); +#26228 = DIRECTION('',(0.,3.331453071942E-15,-1.)); +#26229 = ADVANCED_FACE('',(#26230),#26248,.F.); +#26230 = FACE_BOUND('',#26231,.T.); +#26231 = EDGE_LOOP('',(#26232,#26233,#26241,#26247)); +#26232 = ORIENTED_EDGE('',*,*,#19943,.T.); +#26233 = ORIENTED_EDGE('',*,*,#26234,.F.); +#26234 = EDGE_CURVE('',#26235,#19936,#26237,.T.); +#26235 = VERTEX_POINT('',#26236); +#26236 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.85924438087)); +#26237 = LINE('',#26238,#26239); +#26238 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.85924438087)); +#26239 = VECTOR('',#26240,1.); +#26240 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26241 = ORIENTED_EDGE('',*,*,#26242,.F.); +#26242 = EDGE_CURVE('',#26211,#26235,#26243,.T.); +#26243 = LINE('',#26244,#26245); +#26244 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.85924438087)); +#26245 = VECTOR('',#26246,1.); +#26246 = DIRECTION('',(-0.,1.,5.524475822672E-15)); +#26247 = ORIENTED_EDGE('',*,*,#26210,.T.); +#26248 = PLANE('',#26249); +#26249 = AXIS2_PLACEMENT_3D('',#26250,#26251,#26252); +#26250 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.85924438087)); +#26251 = DIRECTION('',(2.710505431214E-16,-5.524475822672E-15,1.)); +#26252 = DIRECTION('',(-3.997228768367E-47,-1.,-5.524475822672E-15)); +#26253 = ADVANCED_FACE('',(#26254),#26272,.F.); +#26254 = FACE_BOUND('',#26255,.T.); +#26255 = EDGE_LOOP('',(#26256,#26257,#26265,#26271)); +#26256 = ORIENTED_EDGE('',*,*,#19935,.T.); +#26257 = ORIENTED_EDGE('',*,*,#26258,.F.); +#26258 = EDGE_CURVE('',#26259,#19928,#26261,.T.); +#26259 = VERTEX_POINT('',#26260); +#26260 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.870941657428)); +#26261 = LINE('',#26262,#26263); +#26262 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.870941657428)); +#26263 = VECTOR('',#26264,1.); +#26264 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26265 = ORIENTED_EDGE('',*,*,#26266,.F.); +#26266 = EDGE_CURVE('',#26235,#26259,#26267,.T.); +#26267 = LINE('',#26268,#26269); +#26268 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.870941657428)); +#26269 = VECTOR('',#26270,1.); +#26270 = DIRECTION('',(-0.,-0.,1.)); +#26271 = ORIENTED_EDGE('',*,*,#26234,.T.); +#26272 = PLANE('',#26273); +#26273 = AXIS2_PLACEMENT_3D('',#26274,#26275,#26276); +#26274 = CARTESIAN_POINT('',(2.241,-5.696267815116E-02,1.870941657428)); +#26275 = DIRECTION('',(0.,-1.,0.)); +#26276 = DIRECTION('',(0.,-0.,-1.)); +#26277 = ADVANCED_FACE('',(#26278),#26296,.F.); +#26278 = FACE_BOUND('',#26279,.T.); +#26279 = EDGE_LOOP('',(#26280,#26281,#26289,#26295)); +#26280 = ORIENTED_EDGE('',*,*,#19927,.T.); +#26281 = ORIENTED_EDGE('',*,*,#26282,.F.); +#26282 = EDGE_CURVE('',#26283,#19920,#26285,.T.); +#26283 = VERTEX_POINT('',#26284); +#26284 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.870941657428)); +#26285 = LINE('',#26286,#26287); +#26286 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.870941657428)); +#26287 = VECTOR('',#26288,1.); +#26288 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26289 = ORIENTED_EDGE('',*,*,#26290,.F.); +#26290 = EDGE_CURVE('',#26259,#26283,#26291,.T.); +#26291 = LINE('',#26292,#26293); +#26292 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.870941657428)); +#26293 = VECTOR('',#26294,1.); +#26294 = DIRECTION('',(-0.,-1.,-4.139929772825E-15)); +#26295 = ORIENTED_EDGE('',*,*,#26258,.T.); +#26296 = PLANE('',#26297); +#26297 = AXIS2_PLACEMENT_3D('',#26298,#26299,#26300); +#26298 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.870941657428)); +#26299 = DIRECTION('',(-2.710505431214E-16,4.139929772825E-15,-1.)); +#26300 = DIRECTION('',(2.818102972463E-47,1.,4.139929772825E-15)); +#26301 = ADVANCED_FACE('',(#26302),#26320,.F.); +#26302 = FACE_BOUND('',#26303,.T.); +#26303 = EDGE_LOOP('',(#26304,#26305,#26313,#26319)); +#26304 = ORIENTED_EDGE('',*,*,#19919,.T.); +#26305 = ORIENTED_EDGE('',*,*,#26306,.F.); +#26306 = EDGE_CURVE('',#26307,#19912,#26309,.T.); +#26307 = VERTEX_POINT('',#26308); +#26308 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.769253333212)); +#26309 = LINE('',#26310,#26311); +#26310 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.769253333212)); +#26311 = VECTOR('',#26312,1.); +#26312 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26313 = ORIENTED_EDGE('',*,*,#26314,.F.); +#26314 = EDGE_CURVE('',#26283,#26307,#26315,.T.); +#26315 = LINE('',#26316,#26317); +#26316 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.769253333212)); +#26317 = VECTOR('',#26318,1.); +#26318 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#26319 = ORIENTED_EDGE('',*,*,#26282,.T.); +#26320 = PLANE('',#26321); +#26321 = AXIS2_PLACEMENT_3D('',#26322,#26323,#26324); +#26322 = CARTESIAN_POINT('',(2.241,-0.109340483186,1.769253333212)); +#26323 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#26324 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#26325 = ADVANCED_FACE('',(#26326),#26337,.F.); +#26326 = FACE_BOUND('',#26327,.T.); +#26327 = EDGE_LOOP('',(#26328,#26329,#26330,#26336)); +#26328 = ORIENTED_EDGE('',*,*,#19911,.T.); +#26329 = ORIENTED_EDGE('',*,*,#26075,.F.); +#26330 = ORIENTED_EDGE('',*,*,#26331,.F.); +#26331 = EDGE_CURVE('',#26307,#26068,#26332,.T.); +#26332 = LINE('',#26333,#26334); +#26333 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.769253333212)); +#26334 = VECTOR('',#26335,1.); +#26335 = DIRECTION('',(-0.,1.,3.964809169332E-15)); +#26336 = ORIENTED_EDGE('',*,*,#26306,.T.); +#26337 = PLANE('',#26338); +#26338 = AXIS2_PLACEMENT_3D('',#26339,#26340,#26341); +#26339 = CARTESIAN_POINT('',(2.241,-5.464921678756E-02,1.769253333212)); +#26340 = DIRECTION('',(2.710505431214E-16,-3.964809169332E-15,1.)); +#26341 = DIRECTION('',(-6.367006509418E-48,-1.,-3.964809169332E-15)); +#26342 = ADVANCED_FACE('',(#26343),#26357,.F.); +#26343 = FACE_BOUND('',#26344,.T.); +#26344 = EDGE_LOOP('',(#26345,#26346,#26347,#26348,#26349,#26350,#26351, + #26352,#26353,#26354,#26355,#26356)); +#26345 = ORIENTED_EDGE('',*,*,#26067,.T.); +#26346 = ORIENTED_EDGE('',*,*,#26098,.T.); +#26347 = ORIENTED_EDGE('',*,*,#26122,.T.); +#26348 = ORIENTED_EDGE('',*,*,#26146,.T.); +#26349 = ORIENTED_EDGE('',*,*,#26170,.T.); +#26350 = ORIENTED_EDGE('',*,*,#26194,.T.); +#26351 = ORIENTED_EDGE('',*,*,#26218,.T.); +#26352 = ORIENTED_EDGE('',*,*,#26242,.T.); +#26353 = ORIENTED_EDGE('',*,*,#26266,.T.); +#26354 = ORIENTED_EDGE('',*,*,#26290,.T.); +#26355 = ORIENTED_EDGE('',*,*,#26314,.T.); +#26356 = ORIENTED_EDGE('',*,*,#26331,.T.); +#26357 = PLANE('',#26358); +#26358 = AXIS2_PLACEMENT_3D('',#26359,#26360,#26361); +#26359 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#26360 = DIRECTION('',(-1.,0.,-0.)); +#26361 = DIRECTION('',(0.,0.,1.)); +#26362 = ADVANCED_FACE('',(#26363,#26425),#26487,.T.); +#26363 = FACE_BOUND('',#26364,.T.); +#26364 = EDGE_LOOP('',(#26365,#26375,#26384,#26393,#26402,#26411,#26419) + ); +#26365 = ORIENTED_EDGE('',*,*,#26366,.T.); +#26366 = EDGE_CURVE('',#26367,#26369,#26371,.T.); +#26367 = VERTEX_POINT('',#26368); +#26368 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.769253333212)); +#26369 = VERTEX_POINT('',#26370); +#26370 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26371 = LINE('',#26372,#26373); +#26372 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26373 = VECTOR('',#26374,1.); +#26374 = DIRECTION('',(-0.,1.,-0.)); +#26375 = ORIENTED_EDGE('',*,*,#26376,.T.); +#26376 = EDGE_CURVE('',#26369,#26377,#26379,.T.); +#26377 = VERTEX_POINT('',#26378); +#26378 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26379 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26380,#26381,#26382,#26383), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#26380 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26381 = CARTESIAN_POINT('',(2.241,8.62005242031E-03,1.769253333212)); +#26382 = CARTESIAN_POINT('',(2.241,2.179898400986E-02,1.773984231732)); +#26383 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26384 = ORIENTED_EDGE('',*,*,#26385,.T.); +#26385 = EDGE_CURVE('',#26377,#26386,#26388,.T.); +#26386 = VERTEX_POINT('',#26387); +#26387 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26388 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26389,#26390,#26391,#26392), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#26389 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26390 = CARTESIAN_POINT('',(2.241,4.223022706577E-02,1.7930118016)); +#26391 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.805644860284)); +#26392 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26393 = ORIENTED_EDGE('',*,*,#26394,.T.); +#26394 = EDGE_CURVE('',#26386,#26395,#26397,.T.); +#26395 = VERTEX_POINT('',#26396); +#26396 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26397 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26398,#26399,#26400,#26401), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#26398 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26399 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.836473682502)); +#26400 = CARTESIAN_POINT('',(2.241,4.223022706577E-02,1.848482886435)); +#26401 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26402 = ORIENTED_EDGE('',*,*,#26403,.T.); +#26403 = EDGE_CURVE('',#26395,#26404,#26406,.T.); +#26404 = VERTEX_POINT('',#26405); +#26405 = CARTESIAN_POINT('',(2.241,-6.430443417865E-03,1.870941657428)); +#26406 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26407,#26408,#26409,#26410), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#26407 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26408 = CARTESIAN_POINT('',(2.241,2.179898400986E-02,1.866470698388)); +#26409 = CARTESIAN_POINT('',(2.241,8.983967691298E-03,1.870941657428)); +#26410 = CARTESIAN_POINT('',(2.241,-6.430443417865E-03,1.870941657428)); +#26411 = ORIENTED_EDGE('',*,*,#26412,.T.); +#26412 = EDGE_CURVE('',#26404,#26413,#26415,.T.); +#26413 = VERTEX_POINT('',#26414); +#26414 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.870941657428)); +#26415 = LINE('',#26416,#26417); +#26416 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.870941657428)); +#26417 = VECTOR('',#26418,1.); +#26418 = DIRECTION('',(-0.,-1.,-7.474873200869E-15)); +#26419 = ORIENTED_EDGE('',*,*,#26420,.T.); +#26420 = EDGE_CURVE('',#26413,#26367,#26421,.T.); +#26421 = LINE('',#26422,#26423); +#26422 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.769253333212)); +#26423 = VECTOR('',#26424,1.); +#26424 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#26425 = FACE_BOUND('',#26426,.T.); +#26426 = EDGE_LOOP('',(#26427,#26437,#26445,#26454,#26463,#26472,#26481) + ); +#26427 = ORIENTED_EDGE('',*,*,#26428,.F.); +#26428 = EDGE_CURVE('',#26429,#26431,#26433,.T.); +#26429 = VERTEX_POINT('',#26430); +#26430 = CARTESIAN_POINT('',(2.241,-2.231274558953E-02,1.85924438087)); +#26431 = VERTEX_POINT('',#26432); +#26432 = CARTESIAN_POINT('',(2.241,-2.231274558952E-02,1.780846633979)); +#26433 = LINE('',#26434,#26435); +#26434 = CARTESIAN_POINT('',(2.241,-2.231274558953E-02,1.85924438087)); +#26435 = VECTOR('',#26436,1.); +#26436 = DIRECTION('',(0.,4.148852035257E-15,-1.)); +#26437 = ORIENTED_EDGE('',*,*,#26438,.F.); +#26438 = EDGE_CURVE('',#26439,#26429,#26441,.T.); +#26439 = VERTEX_POINT('',#26440); +#26440 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26441 = LINE('',#26442,#26443); +#26442 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26443 = VECTOR('',#26444,1.); +#26444 = DIRECTION('',(0.,-1.,0.)); +#26445 = ORIENTED_EDGE('',*,*,#26446,.F.); +#26446 = EDGE_CURVE('',#26447,#26439,#26449,.T.); +#26447 = VERTEX_POINT('',#26448); +#26448 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26449 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26450,#26451,#26452,#26453), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#26450 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26451 = CARTESIAN_POINT('',(2.241,1.496257570955E-02,1.856073119225)); +#26452 = CARTESIAN_POINT('',(2.241,5.162857348336E-03,1.85924438087)); +#26453 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26454 = ORIENTED_EDGE('',*,*,#26455,.F.); +#26455 = EDGE_CURVE('',#26456,#26447,#26458,.T.); +#26456 = VERTEX_POINT('',#26457); +#26457 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26458 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26459,#26460,#26461,#26462), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#26459 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26460 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.833718324024)); +#26461 = CARTESIAN_POINT('',(2.241,2.983111391326E-02,1.843284096854)); +#26462 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26463 = ORIENTED_EDGE('',*,*,#26464,.F.); +#26464 = EDGE_CURVE('',#26465,#26456,#26467,.T.); +#26465 = VERTEX_POINT('',#26466); +#26466 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26467 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26468,#26469,#26470,#26471), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#26468 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26469 = CARTESIAN_POINT('',(2.241,2.993508970547E-02,1.798470530661)); +#26470 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.808348230866)); +#26471 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26472 = ORIENTED_EDGE('',*,*,#26473,.F.); +#26473 = EDGE_CURVE('',#26474,#26465,#26476,.T.); +#26474 = VERTEX_POINT('',#26475); +#26475 = CARTESIAN_POINT('',(2.241,-7.548183178017E-03,1.780846633979)); +#26476 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26477,#26478,#26479,#26480), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#26477 = CARTESIAN_POINT('',(2.241,-7.548183178017E-03,1.780846633979)); +#26478 = CARTESIAN_POINT('',(2.241,5.370808932056E-03,1.780846633979)); +#26479 = CARTESIAN_POINT('',(2.241,1.545646072062E-02,1.784381810895)); +#26480 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26481 = ORIENTED_EDGE('',*,*,#26482,.F.); +#26482 = EDGE_CURVE('',#26431,#26474,#26483,.T.); +#26483 = LINE('',#26484,#26485); +#26484 = CARTESIAN_POINT('',(2.241,-2.231274558952E-02,1.780846633979)); +#26485 = VECTOR('',#26486,1.); +#26486 = DIRECTION('',(0.,1.,0.)); +#26487 = PLANE('',#26488); +#26488 = AXIS2_PLACEMENT_3D('',#26489,#26490,#26491); +#26489 = CARTESIAN_POINT('',(2.241,1.474162715293E-02,1.867581939661)); +#26490 = DIRECTION('',(1.,-0.,0.)); +#26491 = DIRECTION('',(0.,0.,-1.)); +#26492 = ADVANCED_FACE('',(#26493),#26509,.F.); +#26493 = FACE_BOUND('',#26494,.T.); +#26494 = EDGE_LOOP('',(#26495,#26496,#26502,#26503)); +#26495 = ORIENTED_EDGE('',*,*,#19999,.T.); +#26496 = ORIENTED_EDGE('',*,*,#26497,.F.); +#26497 = EDGE_CURVE('',#26369,#20002,#26498,.T.); +#26498 = LINE('',#26499,#26500); +#26499 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26500 = VECTOR('',#26501,1.); +#26501 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26502 = ORIENTED_EDGE('',*,*,#26366,.F.); +#26503 = ORIENTED_EDGE('',*,*,#26504,.T.); +#26504 = EDGE_CURVE('',#26367,#20000,#26505,.T.); +#26505 = LINE('',#26506,#26507); +#26506 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.769253333212)); +#26507 = VECTOR('',#26508,1.); +#26508 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26509 = PLANE('',#26510); +#26510 = AXIS2_PLACEMENT_3D('',#26511,#26512,#26513); +#26511 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26512 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#26513 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#26514 = ADVANCED_FACE('',(#26515),#26526,.F.); +#26515 = FACE_BOUND('',#26516,.F.); +#26516 = EDGE_LOOP('',(#26517,#26518,#26519,#26525)); +#26517 = ORIENTED_EDGE('',*,*,#26497,.F.); +#26518 = ORIENTED_EDGE('',*,*,#26376,.T.); +#26519 = ORIENTED_EDGE('',*,*,#26520,.T.); +#26520 = EDGE_CURVE('',#26377,#20044,#26521,.T.); +#26521 = LINE('',#26522,#26523); +#26522 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26523 = VECTOR('',#26524,1.); +#26524 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26525 = ORIENTED_EDGE('',*,*,#20052,.F.); +#26526 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26527,#26528) + ,(#26529,#26530) + ,(#26531,#26532) + ,(#26533,#26534 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26527 = CARTESIAN_POINT('',(2.241,-7.470201334381E-03,1.769253333212)); +#26528 = CARTESIAN_POINT('',(2.24,-7.470201334381E-03,1.769253333212)); +#26529 = CARTESIAN_POINT('',(2.241,8.62005242031E-03,1.769253333212)); +#26530 = CARTESIAN_POINT('',(2.24,8.62005242031E-03,1.769253333212)); +#26531 = CARTESIAN_POINT('',(2.241,2.179898400986E-02,1.773984231732)); +#26532 = CARTESIAN_POINT('',(2.24,2.179898400986E-02,1.773984231732)); +#26533 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26534 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.783498016666)); +#26535 = ADVANCED_FACE('',(#26536),#26547,.F.); +#26536 = FACE_BOUND('',#26537,.F.); +#26537 = EDGE_LOOP('',(#26538,#26539,#26540,#26546)); +#26538 = ORIENTED_EDGE('',*,*,#26520,.F.); +#26539 = ORIENTED_EDGE('',*,*,#26385,.T.); +#26540 = ORIENTED_EDGE('',*,*,#26541,.T.); +#26541 = EDGE_CURVE('',#26386,#20035,#26542,.T.); +#26542 = LINE('',#26543,#26544); +#26543 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26544 = VECTOR('',#26545,1.); +#26545 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26546 = ORIENTED_EDGE('',*,*,#20043,.F.); +#26547 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26548,#26549) + ,(#26550,#26551) + ,(#26552,#26553) + ,(#26554,#26555 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26548 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.783498016666)); +#26549 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.783498016666)); +#26550 = CARTESIAN_POINT('',(2.241,4.223022706577E-02,1.7930118016)); +#26551 = CARTESIAN_POINT('',(2.24,4.223022706577E-02,1.7930118016)); +#26552 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.805644860284)); +#26553 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.805644860284)); +#26554 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26555 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.821397192716)); +#26556 = ADVANCED_FACE('',(#26557),#26568,.F.); +#26557 = FACE_BOUND('',#26558,.F.); +#26558 = EDGE_LOOP('',(#26559,#26560,#26561,#26567)); +#26559 = ORIENTED_EDGE('',*,*,#26541,.F.); +#26560 = ORIENTED_EDGE('',*,*,#26394,.T.); +#26561 = ORIENTED_EDGE('',*,*,#26562,.T.); +#26562 = EDGE_CURVE('',#26395,#20026,#26563,.T.); +#26563 = LINE('',#26564,#26565); +#26564 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26565 = VECTOR('',#26566,1.); +#26566 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26567 = ORIENTED_EDGE('',*,*,#20034,.F.); +#26568 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26569,#26570) + ,(#26571,#26572) + ,(#26573,#26574) + ,(#26575,#26576 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26569 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.821397192716)); +#26570 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.821397192716)); +#26571 = CARTESIAN_POINT('',(2.241,4.735103480334E-02,1.836473682502)); +#26572 = CARTESIAN_POINT('',(2.24,4.735103480334E-02,1.836473682502)); +#26573 = CARTESIAN_POINT('',(2.241,4.223022706577E-02,1.848482886435)); +#26574 = CARTESIAN_POINT('',(2.24,4.223022706577E-02,1.848482886435)); +#26575 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26576 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.857476792412)); +#26577 = ADVANCED_FACE('',(#26578),#26589,.F.); +#26578 = FACE_BOUND('',#26579,.F.); +#26579 = EDGE_LOOP('',(#26580,#26581,#26582,#26588)); +#26580 = ORIENTED_EDGE('',*,*,#26562,.F.); +#26581 = ORIENTED_EDGE('',*,*,#26403,.T.); +#26582 = ORIENTED_EDGE('',*,*,#26583,.T.); +#26583 = EDGE_CURVE('',#26404,#20018,#26584,.T.); +#26584 = LINE('',#26585,#26586); +#26585 = CARTESIAN_POINT('',(2.241,-6.430443417865E-03,1.870941657428)); +#26586 = VECTOR('',#26587,1.); +#26587 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26588 = ORIENTED_EDGE('',*,*,#20025,.F.); +#26589 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26590,#26591) + ,(#26592,#26593) + ,(#26594,#26595) + ,(#26596,#26597 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26590 = CARTESIAN_POINT('',(2.241,3.201460553781E-02,1.857476792412)); +#26591 = CARTESIAN_POINT('',(2.24,3.201460553781E-02,1.857476792412)); +#26592 = CARTESIAN_POINT('',(2.241,2.179898400986E-02,1.866470698388)); +#26593 = CARTESIAN_POINT('',(2.24,2.179898400986E-02,1.866470698388)); +#26594 = CARTESIAN_POINT('',(2.241,8.983967691298E-03,1.870941657428)); +#26595 = CARTESIAN_POINT('',(2.24,8.983967691298E-03,1.870941657428)); +#26596 = CARTESIAN_POINT('',(2.241,-6.430443417865E-03,1.870941657428)); +#26597 = CARTESIAN_POINT('',(2.24,-6.430443417865E-03,1.870941657428)); +#26598 = ADVANCED_FACE('',(#26599),#26610,.F.); +#26599 = FACE_BOUND('',#26600,.T.); +#26600 = EDGE_LOOP('',(#26601,#26602,#26608,#26609)); +#26601 = ORIENTED_EDGE('',*,*,#20017,.T.); +#26602 = ORIENTED_EDGE('',*,*,#26603,.F.); +#26603 = EDGE_CURVE('',#26413,#20010,#26604,.T.); +#26604 = LINE('',#26605,#26606); +#26605 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.870941657428)); +#26606 = VECTOR('',#26607,1.); +#26607 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26608 = ORIENTED_EDGE('',*,*,#26412,.F.); +#26609 = ORIENTED_EDGE('',*,*,#26583,.T.); +#26610 = PLANE('',#26611); +#26611 = AXIS2_PLACEMENT_3D('',#26612,#26613,#26614); +#26612 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.870941657428)); +#26613 = DIRECTION('',(-2.710505431214E-16,7.474873200869E-15,-1.)); +#26614 = DIRECTION('',(9.536672272317E-47,1.,7.474873200869E-15)); +#26615 = ADVANCED_FACE('',(#26616),#26622,.F.); +#26616 = FACE_BOUND('',#26617,.T.); +#26617 = EDGE_LOOP('',(#26618,#26619,#26620,#26621)); +#26618 = ORIENTED_EDGE('',*,*,#20009,.T.); +#26619 = ORIENTED_EDGE('',*,*,#26504,.F.); +#26620 = ORIENTED_EDGE('',*,*,#26420,.F.); +#26621 = ORIENTED_EDGE('',*,*,#26603,.T.); +#26622 = PLANE('',#26623); +#26623 = AXIS2_PLACEMENT_3D('',#26624,#26625,#26626); +#26624 = CARTESIAN_POINT('',(2.241,-3.543968928332E-02,1.769253333212)); +#26625 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#26626 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#26627 = ADVANCED_FACE('',(#26628),#26653,.T.); +#26628 = FACE_BOUND('',#26629,.T.); +#26629 = EDGE_LOOP('',(#26630,#26640,#26646,#26647)); +#26630 = ORIENTED_EDGE('',*,*,#26631,.F.); +#26631 = EDGE_CURVE('',#26632,#26634,#26636,.T.); +#26632 = VERTEX_POINT('',#26633); +#26633 = CARTESIAN_POINT('',(2.24,-6.950322376815E-03,1.85924438087)); +#26634 = VERTEX_POINT('',#26635); +#26635 = CARTESIAN_POINT('',(2.24,-2.231274558953E-02,1.85924438087)); +#26636 = LINE('',#26637,#26638); +#26637 = CARTESIAN_POINT('',(2.24,-6.950322376815E-03,1.85924438087)); +#26638 = VECTOR('',#26639,1.); +#26639 = DIRECTION('',(0.,-1.,0.)); +#26640 = ORIENTED_EDGE('',*,*,#26641,.F.); +#26641 = EDGE_CURVE('',#26439,#26632,#26642,.T.); +#26642 = LINE('',#26643,#26644); +#26643 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26644 = VECTOR('',#26645,1.); +#26645 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26646 = ORIENTED_EDGE('',*,*,#26438,.T.); +#26647 = ORIENTED_EDGE('',*,*,#26648,.T.); +#26648 = EDGE_CURVE('',#26429,#26634,#26649,.T.); +#26649 = LINE('',#26650,#26651); +#26650 = CARTESIAN_POINT('',(2.241,-2.231274558953E-02,1.85924438087)); +#26651 = VECTOR('',#26652,1.); +#26652 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26653 = PLANE('',#26654); +#26654 = AXIS2_PLACEMENT_3D('',#26655,#26656,#26657); +#26655 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26656 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#26657 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#26658 = ADVANCED_FACE('',(#26659),#26677,.T.); +#26659 = FACE_BOUND('',#26660,.T.); +#26660 = EDGE_LOOP('',(#26661,#26669,#26670,#26671)); +#26661 = ORIENTED_EDGE('',*,*,#26662,.F.); +#26662 = EDGE_CURVE('',#26634,#26663,#26665,.T.); +#26663 = VERTEX_POINT('',#26664); +#26664 = CARTESIAN_POINT('',(2.24,-2.231274558952E-02,1.780846633979)); +#26665 = LINE('',#26666,#26667); +#26666 = CARTESIAN_POINT('',(2.24,-2.231274558953E-02,1.85924438087)); +#26667 = VECTOR('',#26668,1.); +#26668 = DIRECTION('',(0.,4.148852035257E-15,-1.)); +#26669 = ORIENTED_EDGE('',*,*,#26648,.F.); +#26670 = ORIENTED_EDGE('',*,*,#26428,.T.); +#26671 = ORIENTED_EDGE('',*,*,#26672,.T.); +#26672 = EDGE_CURVE('',#26431,#26663,#26673,.T.); +#26673 = LINE('',#26674,#26675); +#26674 = CARTESIAN_POINT('',(2.241,-2.231274558952E-02,1.780846633979)); +#26675 = VECTOR('',#26676,1.); +#26676 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26677 = PLANE('',#26678); +#26678 = AXIS2_PLACEMENT_3D('',#26679,#26680,#26681); +#26679 = CARTESIAN_POINT('',(2.241,-2.231274558953E-02,1.85924438087)); +#26680 = DIRECTION('',(1.124548597487E-30,1.,4.148852035257E-15)); +#26681 = DIRECTION('',(0.,-4.148852035257E-15,1.)); +#26682 = ADVANCED_FACE('',(#26683),#26701,.T.); +#26683 = FACE_BOUND('',#26684,.T.); +#26684 = EDGE_LOOP('',(#26685,#26693,#26694,#26695)); +#26685 = ORIENTED_EDGE('',*,*,#26686,.F.); +#26686 = EDGE_CURVE('',#26663,#26687,#26689,.T.); +#26687 = VERTEX_POINT('',#26688); +#26688 = CARTESIAN_POINT('',(2.24,-7.548183178017E-03,1.780846633979)); +#26689 = LINE('',#26690,#26691); +#26690 = CARTESIAN_POINT('',(2.24,-2.231274558952E-02,1.780846633979)); +#26691 = VECTOR('',#26692,1.); +#26692 = DIRECTION('',(0.,1.,0.)); +#26693 = ORIENTED_EDGE('',*,*,#26672,.F.); +#26694 = ORIENTED_EDGE('',*,*,#26482,.T.); +#26695 = ORIENTED_EDGE('',*,*,#26696,.T.); +#26696 = EDGE_CURVE('',#26474,#26687,#26697,.T.); +#26697 = LINE('',#26698,#26699); +#26698 = CARTESIAN_POINT('',(2.241,-7.548183178017E-03,1.780846633979)); +#26699 = VECTOR('',#26700,1.); +#26700 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26701 = PLANE('',#26702); +#26702 = AXIS2_PLACEMENT_3D('',#26703,#26704,#26705); +#26703 = CARTESIAN_POINT('',(2.241,-2.231274558952E-02,1.780846633979)); +#26704 = DIRECTION('',(2.710505431214E-16,-0.,1.)); +#26705 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#26706 = ADVANCED_FACE('',(#26707),#26726,.T.); +#26707 = FACE_BOUND('',#26708,.T.); +#26708 = EDGE_LOOP('',(#26709,#26718,#26719,#26720)); +#26709 = ORIENTED_EDGE('',*,*,#26710,.F.); +#26710 = EDGE_CURVE('',#26687,#26711,#26713,.T.); +#26711 = VERTEX_POINT('',#26712); +#26712 = CARTESIAN_POINT('',(2.24,2.268277823911E-02,1.791452164725)); +#26713 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26714,#26715,#26716,#26717), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#26714 = CARTESIAN_POINT('',(2.24,-7.548183178017E-03,1.780846633979)); +#26715 = CARTESIAN_POINT('',(2.24,5.370808932056E-03,1.780846633979)); +#26716 = CARTESIAN_POINT('',(2.24,1.545646072062E-02,1.784381810895)); +#26717 = CARTESIAN_POINT('',(2.24,2.268277823911E-02,1.791452164725)); +#26718 = ORIENTED_EDGE('',*,*,#26696,.F.); +#26719 = ORIENTED_EDGE('',*,*,#26473,.T.); +#26720 = ORIENTED_EDGE('',*,*,#26721,.T.); +#26721 = EDGE_CURVE('',#26465,#26711,#26722,.T.); +#26722 = LINE('',#26723,#26724); +#26723 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26724 = VECTOR('',#26725,1.); +#26725 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26726 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26727,#26728) + ,(#26729,#26730) + ,(#26731,#26732) + ,(#26733,#26734 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26727 = CARTESIAN_POINT('',(2.241,-7.548183178017E-03,1.780846633979)); +#26728 = CARTESIAN_POINT('',(2.24,-7.548183178017E-03,1.780846633979)); +#26729 = CARTESIAN_POINT('',(2.241,5.370808932056E-03,1.780846633979)); +#26730 = CARTESIAN_POINT('',(2.24,5.370808932056E-03,1.780846633979)); +#26731 = CARTESIAN_POINT('',(2.241,1.545646072062E-02,1.784381810895)); +#26732 = CARTESIAN_POINT('',(2.24,1.545646072062E-02,1.784381810895)); +#26733 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26734 = CARTESIAN_POINT('',(2.24,2.268277823911E-02,1.791452164725)); +#26735 = ADVANCED_FACE('',(#26736),#26755,.T.); +#26736 = FACE_BOUND('',#26737,.T.); +#26737 = EDGE_LOOP('',(#26738,#26747,#26748,#26749)); +#26738 = ORIENTED_EDGE('',*,*,#26739,.F.); +#26739 = EDGE_CURVE('',#26711,#26740,#26742,.T.); +#26740 = VERTEX_POINT('',#26741); +#26741 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.821033277445)); +#26742 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26743,#26744,#26745,#26746), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#26743 = CARTESIAN_POINT('',(2.24,2.268277823911E-02,1.791452164725)); +#26744 = CARTESIAN_POINT('',(2.24,2.993508970547E-02,1.798470530661)); +#26745 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.808348230866)); +#26746 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.821033277445)); +#26747 = ORIENTED_EDGE('',*,*,#26721,.F.); +#26748 = ORIENTED_EDGE('',*,*,#26464,.T.); +#26749 = ORIENTED_EDGE('',*,*,#26750,.T.); +#26750 = EDGE_CURVE('',#26456,#26740,#26751,.T.); +#26751 = LINE('',#26752,#26753); +#26752 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26753 = VECTOR('',#26754,1.); +#26754 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26755 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26756,#26757) + ,(#26758,#26759) + ,(#26760,#26761) + ,(#26762,#26763 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26756 = CARTESIAN_POINT('',(2.241,2.268277823911E-02,1.791452164725)); +#26757 = CARTESIAN_POINT('',(2.24,2.268277823911E-02,1.791452164725)); +#26758 = CARTESIAN_POINT('',(2.241,2.993508970547E-02,1.798470530661)); +#26759 = CARTESIAN_POINT('',(2.24,2.993508970547E-02,1.798470530661)); +#26760 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.808348230866)); +#26761 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.808348230866)); +#26762 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26763 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.821033277445)); +#26764 = ADVANCED_FACE('',(#26765),#26784,.T.); +#26765 = FACE_BOUND('',#26766,.T.); +#26766 = EDGE_LOOP('',(#26767,#26776,#26777,#26778)); +#26767 = ORIENTED_EDGE('',*,*,#26768,.F.); +#26768 = EDGE_CURVE('',#26740,#26769,#26771,.T.); +#26769 = VERTEX_POINT('',#26770); +#26770 = CARTESIAN_POINT('',(2.24,2.239684481175E-02,1.849678608039)); +#26771 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26772,#26773,#26774,#26775), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#26772 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.821033277445)); +#26773 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.833718324024)); +#26774 = CARTESIAN_POINT('',(2.24,2.983111391326E-02,1.843284096854)); +#26775 = CARTESIAN_POINT('',(2.24,2.239684481175E-02,1.849678608039)); +#26776 = ORIENTED_EDGE('',*,*,#26750,.F.); +#26777 = ORIENTED_EDGE('',*,*,#26455,.T.); +#26778 = ORIENTED_EDGE('',*,*,#26779,.T.); +#26779 = EDGE_CURVE('',#26447,#26769,#26780,.T.); +#26780 = LINE('',#26781,#26782); +#26781 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26782 = VECTOR('',#26783,1.); +#26783 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26784 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26785,#26786) + ,(#26787,#26788) + ,(#26789,#26790) + ,(#26791,#26792 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26785 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.821033277445)); +#26786 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.821033277445)); +#26787 = CARTESIAN_POINT('',(2.241,3.354824846471E-02,1.833718324024)); +#26788 = CARTESIAN_POINT('',(2.24,3.354824846471E-02,1.833718324024)); +#26789 = CARTESIAN_POINT('',(2.241,2.983111391326E-02,1.843284096854)); +#26790 = CARTESIAN_POINT('',(2.24,2.983111391326E-02,1.843284096854)); +#26791 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26792 = CARTESIAN_POINT('',(2.24,2.239684481175E-02,1.849678608039)); +#26793 = ADVANCED_FACE('',(#26794),#26806,.T.); +#26794 = FACE_BOUND('',#26795,.T.); +#26795 = EDGE_LOOP('',(#26796,#26803,#26804,#26805)); +#26796 = ORIENTED_EDGE('',*,*,#26797,.F.); +#26797 = EDGE_CURVE('',#26769,#26632,#26798,.T.); +#26798 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26799,#26800,#26801,#26802), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#26799 = CARTESIAN_POINT('',(2.24,2.239684481175E-02,1.849678608039)); +#26800 = CARTESIAN_POINT('',(2.24,1.496257570955E-02,1.856073119225)); +#26801 = CARTESIAN_POINT('',(2.24,5.162857348336E-03,1.85924438087)); +#26802 = CARTESIAN_POINT('',(2.24,-6.950322376815E-03,1.85924438087)); +#26803 = ORIENTED_EDGE('',*,*,#26779,.F.); +#26804 = ORIENTED_EDGE('',*,*,#26446,.T.); +#26805 = ORIENTED_EDGE('',*,*,#26641,.T.); +#26806 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#26807,#26808) + ,(#26809,#26810) + ,(#26811,#26812) + ,(#26813,#26814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#26807 = CARTESIAN_POINT('',(2.241,2.239684481175E-02,1.849678608039)); +#26808 = CARTESIAN_POINT('',(2.24,2.239684481175E-02,1.849678608039)); +#26809 = CARTESIAN_POINT('',(2.241,1.496257570955E-02,1.856073119225)); +#26810 = CARTESIAN_POINT('',(2.24,1.496257570955E-02,1.856073119225)); +#26811 = CARTESIAN_POINT('',(2.241,5.162857348336E-03,1.85924438087)); +#26812 = CARTESIAN_POINT('',(2.24,5.162857348336E-03,1.85924438087)); +#26813 = CARTESIAN_POINT('',(2.241,-6.950322376815E-03,1.85924438087)); +#26814 = CARTESIAN_POINT('',(2.24,-6.950322376815E-03,1.85924438087)); +#26815 = ADVANCED_FACE('',(#26816),#26825,.F.); +#26816 = FACE_BOUND('',#26817,.T.); +#26817 = EDGE_LOOP('',(#26818,#26819,#26820,#26821,#26822,#26823,#26824) + ); +#26818 = ORIENTED_EDGE('',*,*,#26797,.T.); +#26819 = ORIENTED_EDGE('',*,*,#26631,.T.); +#26820 = ORIENTED_EDGE('',*,*,#26662,.T.); +#26821 = ORIENTED_EDGE('',*,*,#26686,.T.); +#26822 = ORIENTED_EDGE('',*,*,#26710,.T.); +#26823 = ORIENTED_EDGE('',*,*,#26739,.T.); +#26824 = ORIENTED_EDGE('',*,*,#26768,.T.); +#26825 = PLANE('',#26826); +#26826 = AXIS2_PLACEMENT_3D('',#26827,#26828,#26829); +#26827 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#26828 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#26829 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#26830 = ADVANCED_FACE('',(#26831,#26897),#26949,.F.); +#26831 = FACE_BOUND('',#26832,.T.); +#26832 = EDGE_LOOP('',(#26833,#26843,#26851,#26859,#26867,#26875,#26883, + #26891)); +#26833 = ORIENTED_EDGE('',*,*,#26834,.T.); +#26834 = EDGE_CURVE('',#26835,#26837,#26839,.T.); +#26835 = VERTEX_POINT('',#26836); +#26836 = CARTESIAN_POINT('',(2.241,0.144490418135,1.769253333212)); +#26837 = VERTEX_POINT('',#26838); +#26838 = CARTESIAN_POINT('',(2.241,0.105759435752,1.870941657428)); +#26839 = LINE('',#26840,#26841); +#26840 = CARTESIAN_POINT('',(2.241,0.105759435752,1.870941657428)); +#26841 = VECTOR('',#26842,1.); +#26842 = DIRECTION('',(-0.,-0.35593572437,0.934510438742)); +#26843 = ORIENTED_EDGE('',*,*,#26844,.T.); +#26844 = EDGE_CURVE('',#26837,#26845,#26847,.T.); +#26845 = VERTEX_POINT('',#26846); +#26846 = CARTESIAN_POINT('',(2.241,9.17227038822E-02,1.870941657428)); +#26847 = LINE('',#26848,#26849); +#26848 = CARTESIAN_POINT('',(2.241,9.17227038822E-02,1.870941657428)); +#26849 = VECTOR('',#26850,1.); +#26850 = DIRECTION('',(-0.,-1.,-0.)); +#26851 = ORIENTED_EDGE('',*,*,#26852,.T.); +#26852 = EDGE_CURVE('',#26845,#26853,#26855,.T.); +#26853 = VERTEX_POINT('',#26854); +#26854 = CARTESIAN_POINT('',(2.241,5.299172149986E-02,1.769253333212)); +#26855 = LINE('',#26856,#26857); +#26856 = CARTESIAN_POINT('',(2.241,5.299172149986E-02,1.769253333212)); +#26857 = VECTOR('',#26858,1.); +#26858 = DIRECTION('',(-0.,-0.355935724364,-0.934510438744)); +#26859 = ORIENTED_EDGE('',*,*,#26860,.T.); +#26860 = EDGE_CURVE('',#26853,#26861,#26863,.T.); +#26861 = VERTEX_POINT('',#26862); +#26862 = CARTESIAN_POINT('',(2.241,6.749634443189E-02,1.769253333212)); +#26863 = LINE('',#26864,#26865); +#26864 = CARTESIAN_POINT('',(2.241,6.749634443189E-02,1.769253333212)); +#26865 = VECTOR('',#26866,1.); +#26866 = DIRECTION('',(-0.,1.,-0.)); +#26867 = ORIENTED_EDGE('',*,*,#26868,.T.); +#26868 = EDGE_CURVE('',#26861,#26869,#26871,.T.); +#26869 = VERTEX_POINT('',#26870); +#26870 = CARTESIAN_POINT('',(2.241,7.727006884523E-02,1.797066857474)); +#26871 = LINE('',#26872,#26873); +#26872 = CARTESIAN_POINT('',(2.241,7.727006884523E-02,1.797066857474)); +#26873 = VECTOR('',#26874,1.); +#26874 = DIRECTION('',(-0.,0.33152841835,0.943445233082)); +#26875 = ORIENTED_EDGE('',*,*,#26876,.T.); +#26876 = EDGE_CURVE('',#26869,#26877,#26879,.T.); +#26877 = VERTEX_POINT('',#26878); +#26878 = CARTESIAN_POINT('',(2.241,0.119614209987,1.797066857474)); +#26879 = LINE('',#26880,#26881); +#26880 = CARTESIAN_POINT('',(2.241,0.119614209987,1.797066857474)); +#26881 = VECTOR('',#26882,1.); +#26882 = DIRECTION('',(-0.,1.,5.120907607231E-15)); +#26883 = ORIENTED_EDGE('',*,*,#26884,.T.); +#26884 = EDGE_CURVE('',#26877,#26885,#26887,.T.); +#26885 = VERTEX_POINT('',#26886); +#26886 = CARTESIAN_POINT('',(2.241,0.129985795203,1.769253333212)); +#26887 = LINE('',#26888,#26889); +#26888 = CARTESIAN_POINT('',(2.241,0.129985795203,1.769253333212)); +#26889 = VECTOR('',#26890,1.); +#26890 = DIRECTION('',(-0.,0.349395479469,-0.936975345954)); +#26891 = ORIENTED_EDGE('',*,*,#26892,.T.); +#26892 = EDGE_CURVE('',#26885,#26835,#26893,.T.); +#26893 = LINE('',#26894,#26895); +#26894 = CARTESIAN_POINT('',(2.241,0.144490418135,1.769253333212)); +#26895 = VECTOR('',#26896,1.); +#26896 = DIRECTION('',(-0.,1.,-0.)); +#26897 = FACE_BOUND('',#26898,.T.); +#26898 = EDGE_LOOP('',(#26899,#26909,#26917,#26926,#26934,#26943)); +#26899 = ORIENTED_EDGE('',*,*,#26900,.F.); +#26900 = EDGE_CURVE('',#26901,#26903,#26905,.T.); +#26901 = VERTEX_POINT('',#26902); +#26902 = CARTESIAN_POINT('',(2.241,8.142910051061E-02,1.808556182449)); +#26903 = VERTEX_POINT('',#26904); +#26904 = CARTESIAN_POINT('',(2.241,0.115559154114,1.808556182449)); +#26905 = LINE('',#26906,#26907); +#26906 = CARTESIAN_POINT('',(2.241,8.142910051061E-02,1.808556182449)); +#26907 = VECTOR('',#26908,1.); +#26908 = DIRECTION('',(0.,1.,0.)); +#26909 = ORIENTED_EDGE('',*,*,#26910,.F.); +#26910 = EDGE_CURVE('',#26911,#26901,#26913,.T.); +#26911 = VERTEX_POINT('',#26912); +#26912 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#26913 = LINE('',#26914,#26915); +#26914 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#26915 = VECTOR('',#26916,1.); +#26916 = DIRECTION('',(0.,-0.338535034314,-0.940953787676)); +#26917 = ORIENTED_EDGE('',*,*,#26918,.F.); +#26918 = EDGE_CURVE('',#26919,#26911,#26921,.T.); +#26919 = VERTEX_POINT('',#26920); +#26920 = CARTESIAN_POINT('',(2.241,9.829917270303E-02,1.857944683474)); +#26921 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26922,#26923,#26924,#26925), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#26922 = CARTESIAN_POINT('',(2.241,9.829917270303E-02,1.857944683474)); +#26923 = CARTESIAN_POINT('',(2.241,9.780528769265E-02,1.854877397621)); +#26924 = CARTESIAN_POINT('',(2.241,9.725941478651E-02,1.852485954414)); +#26925 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#26926 = ORIENTED_EDGE('',*,*,#26927,.F.); +#26927 = EDGE_CURVE('',#26928,#26919,#26930,.T.); +#26928 = VERTEX_POINT('',#26929); +#26929 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#26930 = LINE('',#26931,#26932); +#26931 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#26932 = VECTOR('',#26933,1.); +#26933 = DIRECTION('',(0.,-1.,0.)); +#26934 = ORIENTED_EDGE('',*,*,#26935,.F.); +#26935 = EDGE_CURVE('',#26936,#26928,#26938,.T.); +#26936 = VERTEX_POINT('',#26937); +#26937 = CARTESIAN_POINT('',(2.241,0.1001967309,1.850822341747)); +#26938 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26939,#26940,#26941,#26942), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#26939 = CARTESIAN_POINT('',(2.241,0.1001967309,1.850822341747)); +#26940 = CARTESIAN_POINT('',(2.241,9.970284588984E-02,1.852226014934)); +#26941 = CARTESIAN_POINT('',(2.241,9.918296693159E-02,1.854565470246)); +#26942 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#26943 = ORIENTED_EDGE('',*,*,#26944,.F.); +#26944 = EDGE_CURVE('',#26903,#26936,#26945,.T.); +#26945 = LINE('',#26946,#26947); +#26946 = CARTESIAN_POINT('',(2.241,0.115559154114,1.808556182449)); +#26947 = VECTOR('',#26948,1.); +#26948 = DIRECTION('',(0.,-0.341603830682,0.939844041777)); +#26949 = PLANE('',#26950); +#26950 = AXIS2_PLACEMENT_3D('',#26951,#26952,#26953); +#26951 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#26952 = DIRECTION('',(-1.,0.,-0.)); +#26953 = DIRECTION('',(0.,0.,1.)); +#26954 = ADVANCED_FACE('',(#26955),#26971,.F.); +#26955 = FACE_BOUND('',#26956,.T.); +#26956 = EDGE_LOOP('',(#26957,#26958,#26964,#26965)); +#26957 = ORIENTED_EDGE('',*,*,#20061,.T.); +#26958 = ORIENTED_EDGE('',*,*,#26959,.F.); +#26959 = EDGE_CURVE('',#26837,#20064,#26960,.T.); +#26960 = LINE('',#26961,#26962); +#26961 = CARTESIAN_POINT('',(2.241,0.105759435752,1.870941657428)); +#26962 = VECTOR('',#26963,1.); +#26963 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26964 = ORIENTED_EDGE('',*,*,#26834,.F.); +#26965 = ORIENTED_EDGE('',*,*,#26966,.T.); +#26966 = EDGE_CURVE('',#26835,#20062,#26967,.T.); +#26967 = LINE('',#26968,#26969); +#26968 = CARTESIAN_POINT('',(2.241,0.144490418135,1.769253333212)); +#26969 = VECTOR('',#26970,1.); +#26970 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26971 = PLANE('',#26972); +#26972 = AXIS2_PLACEMENT_3D('',#26973,#26974,#26975); +#26973 = CARTESIAN_POINT('',(2.241,0.105759435752,1.870941657428)); +#26974 = DIRECTION('',(-9.647657140676E-17,-0.934510438742, + -0.35593572437)); +#26975 = DIRECTION('',(2.116953779202E-33,0.35593572437,-0.934510438742) + ); +#26976 = ADVANCED_FACE('',(#26977),#26988,.F.); +#26977 = FACE_BOUND('',#26978,.T.); +#26978 = EDGE_LOOP('',(#26979,#26980,#26986,#26987)); +#26979 = ORIENTED_EDGE('',*,*,#20119,.T.); +#26980 = ORIENTED_EDGE('',*,*,#26981,.F.); +#26981 = EDGE_CURVE('',#26845,#20112,#26982,.T.); +#26982 = LINE('',#26983,#26984); +#26983 = CARTESIAN_POINT('',(2.241,9.17227038822E-02,1.870941657428)); +#26984 = VECTOR('',#26985,1.); +#26985 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#26986 = ORIENTED_EDGE('',*,*,#26844,.F.); +#26987 = ORIENTED_EDGE('',*,*,#26959,.T.); +#26988 = PLANE('',#26989); +#26989 = AXIS2_PLACEMENT_3D('',#26990,#26991,#26992); +#26990 = CARTESIAN_POINT('',(2.241,9.17227038822E-02,1.870941657428)); +#26991 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#26992 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#26993 = ADVANCED_FACE('',(#26994),#27005,.F.); +#26994 = FACE_BOUND('',#26995,.T.); +#26995 = EDGE_LOOP('',(#26996,#26997,#27003,#27004)); +#26996 = ORIENTED_EDGE('',*,*,#20111,.T.); +#26997 = ORIENTED_EDGE('',*,*,#26998,.F.); +#26998 = EDGE_CURVE('',#26853,#20104,#26999,.T.); +#26999 = LINE('',#27000,#27001); +#27000 = CARTESIAN_POINT('',(2.241,5.299172149986E-02,1.769253333212)); +#27001 = VECTOR('',#27002,1.); +#27002 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27003 = ORIENTED_EDGE('',*,*,#26852,.F.); +#27004 = ORIENTED_EDGE('',*,*,#26981,.T.); +#27005 = PLANE('',#27006); +#27006 = AXIS2_PLACEMENT_3D('',#27007,#27008,#27009); +#27007 = CARTESIAN_POINT('',(2.241,5.299172149986E-02,1.769253333212)); +#27008 = DIRECTION('',(-9.647657140525E-17,0.934510438744, + -0.355935724364)); +#27009 = DIRECTION('',(3.033240953668E-33,0.355935724364,0.934510438744) + ); +#27010 = ADVANCED_FACE('',(#27011),#27022,.F.); +#27011 = FACE_BOUND('',#27012,.T.); +#27012 = EDGE_LOOP('',(#27013,#27014,#27020,#27021)); +#27013 = ORIENTED_EDGE('',*,*,#20103,.T.); +#27014 = ORIENTED_EDGE('',*,*,#27015,.F.); +#27015 = EDGE_CURVE('',#26861,#20096,#27016,.T.); +#27016 = LINE('',#27017,#27018); +#27017 = CARTESIAN_POINT('',(2.241,6.749634443189E-02,1.769253333212)); +#27018 = VECTOR('',#27019,1.); +#27019 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27020 = ORIENTED_EDGE('',*,*,#26860,.F.); +#27021 = ORIENTED_EDGE('',*,*,#26998,.T.); +#27022 = PLANE('',#27023); +#27023 = AXIS2_PLACEMENT_3D('',#27024,#27025,#27026); +#27024 = CARTESIAN_POINT('',(2.241,6.749634443189E-02,1.769253333212)); +#27025 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#27026 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#27027 = ADVANCED_FACE('',(#27028),#27039,.F.); +#27028 = FACE_BOUND('',#27029,.T.); +#27029 = EDGE_LOOP('',(#27030,#27031,#27037,#27038)); +#27030 = ORIENTED_EDGE('',*,*,#20095,.T.); +#27031 = ORIENTED_EDGE('',*,*,#27032,.F.); +#27032 = EDGE_CURVE('',#26869,#20088,#27033,.T.); +#27033 = LINE('',#27034,#27035); +#27034 = CARTESIAN_POINT('',(2.241,7.727006884523E-02,1.797066857474)); +#27035 = VECTOR('',#27036,1.); +#27036 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27037 = ORIENTED_EDGE('',*,*,#26868,.F.); +#27038 = ORIENTED_EDGE('',*,*,#27015,.T.); +#27039 = PLANE('',#27040); +#27040 = AXIS2_PLACEMENT_3D('',#27041,#27042,#27043); +#27041 = CARTESIAN_POINT('',(2.241,7.727006884523E-02,1.797066857474)); +#27042 = DIRECTION('',(8.986095785405E-17,-0.943445233082,0.33152841835) + ); +#27043 = DIRECTION('',(-1.818490127641E-34,-0.33152841835, + -0.943445233082)); +#27044 = ADVANCED_FACE('',(#27045),#27056,.F.); +#27045 = FACE_BOUND('',#27046,.T.); +#27046 = EDGE_LOOP('',(#27047,#27048,#27054,#27055)); +#27047 = ORIENTED_EDGE('',*,*,#20087,.T.); +#27048 = ORIENTED_EDGE('',*,*,#27049,.F.); +#27049 = EDGE_CURVE('',#26877,#20080,#27050,.T.); +#27050 = LINE('',#27051,#27052); +#27051 = CARTESIAN_POINT('',(2.241,0.119614209987,1.797066857474)); +#27052 = VECTOR('',#27053,1.); +#27053 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27054 = ORIENTED_EDGE('',*,*,#26876,.F.); +#27055 = ORIENTED_EDGE('',*,*,#27032,.T.); +#27056 = PLANE('',#27057); +#27057 = AXIS2_PLACEMENT_3D('',#27058,#27059,#27060); +#27058 = CARTESIAN_POINT('',(2.241,0.119614209987,1.797066857474)); +#27059 = DIRECTION('',(2.710505431214E-16,-5.120907607231E-15,1.)); +#27060 = DIRECTION('',(-6.15803063326E-47,-1.,-5.120907607231E-15)); +#27061 = ADVANCED_FACE('',(#27062),#27073,.F.); +#27062 = FACE_BOUND('',#27063,.T.); +#27063 = EDGE_LOOP('',(#27064,#27065,#27071,#27072)); +#27064 = ORIENTED_EDGE('',*,*,#20079,.T.); +#27065 = ORIENTED_EDGE('',*,*,#27066,.F.); +#27066 = EDGE_CURVE('',#26885,#20072,#27067,.T.); +#27067 = LINE('',#27068,#27069); +#27068 = CARTESIAN_POINT('',(2.241,0.129985795203,1.769253333212)); +#27069 = VECTOR('',#27070,1.); +#27070 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27071 = ORIENTED_EDGE('',*,*,#26884,.F.); +#27072 = ORIENTED_EDGE('',*,*,#27049,.T.); +#27073 = PLANE('',#27074); +#27074 = AXIS2_PLACEMENT_3D('',#27075,#27076,#27077); +#27075 = CARTESIAN_POINT('',(2.241,0.129985795203,1.769253333212)); +#27076 = DIRECTION('',(9.470383447427E-17,0.936975345954,0.349395479469) + ); +#27077 = DIRECTION('',(-6.2561398313E-34,-0.349395479469,0.936975345954) + ); +#27078 = ADVANCED_FACE('',(#27079),#27085,.F.); +#27079 = FACE_BOUND('',#27080,.T.); +#27080 = EDGE_LOOP('',(#27081,#27082,#27083,#27084)); +#27081 = ORIENTED_EDGE('',*,*,#20071,.T.); +#27082 = ORIENTED_EDGE('',*,*,#26966,.F.); +#27083 = ORIENTED_EDGE('',*,*,#26892,.F.); +#27084 = ORIENTED_EDGE('',*,*,#27066,.T.); +#27085 = PLANE('',#27086); +#27086 = AXIS2_PLACEMENT_3D('',#27087,#27088,#27089); +#27087 = CARTESIAN_POINT('',(2.241,0.144490418135,1.769253333212)); +#27088 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#27089 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#27090 = ADVANCED_FACE('',(#27091),#27116,.T.); +#27091 = FACE_BOUND('',#27092,.T.); +#27092 = EDGE_LOOP('',(#27093,#27103,#27109,#27110)); +#27093 = ORIENTED_EDGE('',*,*,#27094,.F.); +#27094 = EDGE_CURVE('',#27095,#27097,#27099,.T.); +#27095 = VERTEX_POINT('',#27096); +#27096 = CARTESIAN_POINT('',(2.24,8.142910051061E-02,1.808556182449)); +#27097 = VERTEX_POINT('',#27098); +#27098 = CARTESIAN_POINT('',(2.24,0.115559154114,1.808556182449)); +#27099 = LINE('',#27100,#27101); +#27100 = CARTESIAN_POINT('',(2.24,8.142910051061E-02,1.808556182449)); +#27101 = VECTOR('',#27102,1.); +#27102 = DIRECTION('',(0.,1.,0.)); +#27103 = ORIENTED_EDGE('',*,*,#27104,.F.); +#27104 = EDGE_CURVE('',#26901,#27095,#27105,.T.); +#27105 = LINE('',#27106,#27107); +#27106 = CARTESIAN_POINT('',(2.241,8.142910051061E-02,1.808556182449)); +#27107 = VECTOR('',#27108,1.); +#27108 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27109 = ORIENTED_EDGE('',*,*,#26900,.T.); +#27110 = ORIENTED_EDGE('',*,*,#27111,.T.); +#27111 = EDGE_CURVE('',#26903,#27097,#27112,.T.); +#27112 = LINE('',#27113,#27114); +#27113 = CARTESIAN_POINT('',(2.241,0.115559154114,1.808556182449)); +#27114 = VECTOR('',#27115,1.); +#27115 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27116 = PLANE('',#27117); +#27117 = AXIS2_PLACEMENT_3D('',#27118,#27119,#27120); +#27118 = CARTESIAN_POINT('',(2.241,8.142910051061E-02,1.808556182449)); +#27119 = DIRECTION('',(2.710505431214E-16,-0.,1.)); +#27120 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#27121 = ADVANCED_FACE('',(#27122),#27140,.T.); +#27122 = FACE_BOUND('',#27123,.T.); +#27123 = EDGE_LOOP('',(#27124,#27132,#27133,#27134)); +#27124 = ORIENTED_EDGE('',*,*,#27125,.F.); +#27125 = EDGE_CURVE('',#27097,#27126,#27128,.T.); +#27126 = VERTEX_POINT('',#27127); +#27127 = CARTESIAN_POINT('',(2.24,0.1001967309,1.850822341747)); +#27128 = LINE('',#27129,#27130); +#27129 = CARTESIAN_POINT('',(2.24,0.115559154114,1.808556182449)); +#27130 = VECTOR('',#27131,1.); +#27131 = DIRECTION('',(0.,-0.341603830682,0.939844041777)); +#27132 = ORIENTED_EDGE('',*,*,#27111,.F.); +#27133 = ORIENTED_EDGE('',*,*,#26944,.T.); +#27134 = ORIENTED_EDGE('',*,*,#27135,.T.); +#27135 = EDGE_CURVE('',#26936,#27126,#27136,.T.); +#27136 = LINE('',#27137,#27138); +#27137 = CARTESIAN_POINT('',(2.241,0.1001967309,1.850822341747)); +#27138 = VECTOR('',#27139,1.); +#27139 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27140 = PLANE('',#27141); +#27141 = AXIS2_PLACEMENT_3D('',#27142,#27143,#27144); +#27142 = CARTESIAN_POINT('',(2.241,0.115559154114,1.808556182449)); +#27143 = DIRECTION('',(-9.259190383858E-17,-0.939844041777, + -0.341603830682)); +#27144 = DIRECTION('',(-1.424495079315E-33,0.341603830682, + -0.939844041777)); +#27145 = ADVANCED_FACE('',(#27146),#27165,.T.); +#27146 = FACE_BOUND('',#27147,.T.); +#27147 = EDGE_LOOP('',(#27148,#27157,#27158,#27159)); +#27148 = ORIENTED_EDGE('',*,*,#27149,.F.); +#27149 = EDGE_CURVE('',#27126,#27150,#27152,.T.); +#27150 = VERTEX_POINT('',#27151); +#27151 = CARTESIAN_POINT('',(2.24,9.861110007757E-02,1.857944683474)); +#27152 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27153,#27154,#27155,#27156), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#27153 = CARTESIAN_POINT('',(2.24,0.1001967309,1.850822341747)); +#27154 = CARTESIAN_POINT('',(2.24,9.970284588984E-02,1.852226014934)); +#27155 = CARTESIAN_POINT('',(2.24,9.918296693159E-02,1.854565470246)); +#27156 = CARTESIAN_POINT('',(2.24,9.861110007757E-02,1.857944683474)); +#27157 = ORIENTED_EDGE('',*,*,#27135,.F.); +#27158 = ORIENTED_EDGE('',*,*,#26935,.T.); +#27159 = ORIENTED_EDGE('',*,*,#27160,.T.); +#27160 = EDGE_CURVE('',#26928,#27150,#27161,.T.); +#27161 = LINE('',#27162,#27163); +#27162 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#27163 = VECTOR('',#27164,1.); +#27164 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27165 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27166,#27167) + ,(#27168,#27169) + ,(#27170,#27171) + ,(#27172,#27173 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27166 = CARTESIAN_POINT('',(2.241,0.1001967309,1.850822341747)); +#27167 = CARTESIAN_POINT('',(2.24,0.1001967309,1.850822341747)); +#27168 = CARTESIAN_POINT('',(2.241,9.970284588984E-02,1.852226014934)); +#27169 = CARTESIAN_POINT('',(2.24,9.970284588984E-02,1.852226014934)); +#27170 = CARTESIAN_POINT('',(2.241,9.918296693159E-02,1.854565470246)); +#27171 = CARTESIAN_POINT('',(2.24,9.918296693159E-02,1.854565470246)); +#27172 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#27173 = CARTESIAN_POINT('',(2.24,9.861110007757E-02,1.857944683474)); +#27174 = ADVANCED_FACE('',(#27175),#27193,.T.); +#27175 = FACE_BOUND('',#27176,.T.); +#27176 = EDGE_LOOP('',(#27177,#27185,#27186,#27187)); +#27177 = ORIENTED_EDGE('',*,*,#27178,.F.); +#27178 = EDGE_CURVE('',#27150,#27179,#27181,.T.); +#27179 = VERTEX_POINT('',#27180); +#27180 = CARTESIAN_POINT('',(2.24,9.829917270303E-02,1.857944683474)); +#27181 = LINE('',#27182,#27183); +#27182 = CARTESIAN_POINT('',(2.24,9.861110007757E-02,1.857944683474)); +#27183 = VECTOR('',#27184,1.); +#27184 = DIRECTION('',(0.,-1.,0.)); +#27185 = ORIENTED_EDGE('',*,*,#27160,.F.); +#27186 = ORIENTED_EDGE('',*,*,#26927,.T.); +#27187 = ORIENTED_EDGE('',*,*,#27188,.T.); +#27188 = EDGE_CURVE('',#26919,#27179,#27189,.T.); +#27189 = LINE('',#27190,#27191); +#27190 = CARTESIAN_POINT('',(2.241,9.829917270303E-02,1.857944683474)); +#27191 = VECTOR('',#27192,1.); +#27192 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27193 = PLANE('',#27194); +#27194 = AXIS2_PLACEMENT_3D('',#27195,#27196,#27197); +#27195 = CARTESIAN_POINT('',(2.241,9.861110007757E-02,1.857944683474)); +#27196 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#27197 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#27198 = ADVANCED_FACE('',(#27199),#27218,.T.); +#27199 = FACE_BOUND('',#27200,.T.); +#27200 = EDGE_LOOP('',(#27201,#27210,#27211,#27212)); +#27201 = ORIENTED_EDGE('',*,*,#27202,.F.); +#27202 = EDGE_CURVE('',#27179,#27203,#27205,.T.); +#27203 = VERTEX_POINT('',#27204); +#27204 = CARTESIAN_POINT('',(2.24,9.663556003674E-02,1.850822341747)); +#27205 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27206,#27207,#27208,#27209), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#27206 = CARTESIAN_POINT('',(2.24,9.829917270303E-02,1.857944683474)); +#27207 = CARTESIAN_POINT('',(2.24,9.780528769265E-02,1.854877397621)); +#27208 = CARTESIAN_POINT('',(2.24,9.725941478651E-02,1.852485954414)); +#27209 = CARTESIAN_POINT('',(2.24,9.663556003674E-02,1.850822341747)); +#27210 = ORIENTED_EDGE('',*,*,#27188,.F.); +#27211 = ORIENTED_EDGE('',*,*,#26918,.T.); +#27212 = ORIENTED_EDGE('',*,*,#27213,.T.); +#27213 = EDGE_CURVE('',#26911,#27203,#27214,.T.); +#27214 = LINE('',#27215,#27216); +#27215 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#27216 = VECTOR('',#27217,1.); +#27217 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27218 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27219,#27220) + ,(#27221,#27222) + ,(#27223,#27224) + ,(#27225,#27226 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27219 = CARTESIAN_POINT('',(2.241,9.829917270303E-02,1.857944683474)); +#27220 = CARTESIAN_POINT('',(2.24,9.829917270303E-02,1.857944683474)); +#27221 = CARTESIAN_POINT('',(2.241,9.780528769265E-02,1.854877397621)); +#27222 = CARTESIAN_POINT('',(2.24,9.780528769265E-02,1.854877397621)); +#27223 = CARTESIAN_POINT('',(2.241,9.725941478651E-02,1.852485954414)); +#27224 = CARTESIAN_POINT('',(2.24,9.725941478651E-02,1.852485954414)); +#27225 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#27226 = CARTESIAN_POINT('',(2.24,9.663556003674E-02,1.850822341747)); +#27227 = ADVANCED_FACE('',(#27228),#27239,.T.); +#27228 = FACE_BOUND('',#27229,.T.); +#27229 = EDGE_LOOP('',(#27230,#27236,#27237,#27238)); +#27230 = ORIENTED_EDGE('',*,*,#27231,.F.); +#27231 = EDGE_CURVE('',#27203,#27095,#27232,.T.); +#27232 = LINE('',#27233,#27234); +#27233 = CARTESIAN_POINT('',(2.24,9.663556003674E-02,1.850822341747)); +#27234 = VECTOR('',#27235,1.); +#27235 = DIRECTION('',(0.,-0.338535034314,-0.940953787676)); +#27236 = ORIENTED_EDGE('',*,*,#27213,.F.); +#27237 = ORIENTED_EDGE('',*,*,#26910,.T.); +#27238 = ORIENTED_EDGE('',*,*,#27104,.T.); +#27239 = PLANE('',#27240); +#27240 = AXIS2_PLACEMENT_3D('',#27241,#27242,#27243); +#27241 = CARTESIAN_POINT('',(2.241,9.663556003674E-02,1.850822341747)); +#27242 = DIRECTION('',(-9.176010491646E-17,0.940953787676, + -0.338535034314)); +#27243 = DIRECTION('',(1.055718610625E-32,0.338535034314,0.940953787676) + ); +#27244 = ADVANCED_FACE('',(#27245),#27253,.F.); +#27245 = FACE_BOUND('',#27246,.T.); +#27246 = EDGE_LOOP('',(#27247,#27248,#27249,#27250,#27251,#27252)); +#27247 = ORIENTED_EDGE('',*,*,#27231,.T.); +#27248 = ORIENTED_EDGE('',*,*,#27094,.T.); +#27249 = ORIENTED_EDGE('',*,*,#27125,.T.); +#27250 = ORIENTED_EDGE('',*,*,#27149,.T.); +#27251 = ORIENTED_EDGE('',*,*,#27178,.T.); +#27252 = ORIENTED_EDGE('',*,*,#27202,.T.); +#27253 = PLANE('',#27254); +#27254 = AXIS2_PLACEMENT_3D('',#27255,#27256,#27257); +#27255 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#27256 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#27257 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#27258 = ADVANCED_FACE('',(#27259),#27284,.F.); +#27259 = FACE_BOUND('',#27260,.T.); +#27260 = EDGE_LOOP('',(#27261,#27262,#27270,#27278)); +#27261 = ORIENTED_EDGE('',*,*,#19449,.T.); +#27262 = ORIENTED_EDGE('',*,*,#27263,.F.); +#27263 = EDGE_CURVE('',#27264,#19452,#27266,.T.); +#27264 = VERTEX_POINT('',#27265); +#27265 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.619528193263)); +#27266 = LINE('',#27267,#27268); +#27267 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.619528193263)); +#27268 = VECTOR('',#27269,1.); +#27269 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27270 = ORIENTED_EDGE('',*,*,#27271,.F.); +#27271 = EDGE_CURVE('',#27272,#27264,#27274,.T.); +#27272 = VERTEX_POINT('',#27273); +#27273 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.607934892496)); +#27274 = LINE('',#27275,#27276); +#27275 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.619528193263)); +#27276 = VECTOR('',#27277,1.); +#27277 = DIRECTION('',(-0.,-0.,1.)); +#27278 = ORIENTED_EDGE('',*,*,#27279,.T.); +#27279 = EDGE_CURVE('',#27272,#19450,#27280,.T.); +#27280 = LINE('',#27281,#27282); +#27281 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.607934892496)); +#27282 = VECTOR('',#27283,1.); +#27283 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27284 = PLANE('',#27285); +#27285 = AXIS2_PLACEMENT_3D('',#27286,#27287,#27288); +#27286 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.619528193263)); +#27287 = DIRECTION('',(0.,-1.,0.)); +#27288 = DIRECTION('',(0.,-0.,-1.)); +#27289 = ADVANCED_FACE('',(#27290),#27308,.F.); +#27290 = FACE_BOUND('',#27291,.T.); +#27291 = EDGE_LOOP('',(#27292,#27293,#27301,#27307)); +#27292 = ORIENTED_EDGE('',*,*,#19539,.T.); +#27293 = ORIENTED_EDGE('',*,*,#27294,.F.); +#27294 = EDGE_CURVE('',#27295,#19532,#27297,.T.); +#27295 = VERTEX_POINT('',#27296); +#27296 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.619528193263)); +#27297 = LINE('',#27298,#27299); +#27298 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.619528193263)); +#27299 = VECTOR('',#27300,1.); +#27300 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27301 = ORIENTED_EDGE('',*,*,#27302,.F.); +#27302 = EDGE_CURVE('',#27264,#27295,#27303,.T.); +#27303 = LINE('',#27304,#27305); +#27304 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.619528193263)); +#27305 = VECTOR('',#27306,1.); +#27306 = DIRECTION('',(-0.,-1.,-5.216984673051E-15)); +#27307 = ORIENTED_EDGE('',*,*,#27263,.T.); +#27308 = PLANE('',#27309); +#27309 = AXIS2_PLACEMENT_3D('',#27310,#27311,#27312); +#27310 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.619528193263)); +#27311 = DIRECTION('',(-2.710505431214E-16,5.216984673051E-15,-1.)); +#27312 = DIRECTION('',(-1.294789084694E-47,1.,5.216984673051E-15)); +#27313 = ADVANCED_FACE('',(#27314),#27332,.F.); +#27314 = FACE_BOUND('',#27315,.T.); +#27315 = EDGE_LOOP('',(#27316,#27317,#27325,#27331)); +#27316 = ORIENTED_EDGE('',*,*,#19531,.T.); +#27317 = ORIENTED_EDGE('',*,*,#27318,.F.); +#27318 = EDGE_CURVE('',#27319,#19524,#27321,.T.); +#27319 = VERTEX_POINT('',#27320); +#27320 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.653736228709)); +#27321 = LINE('',#27322,#27323); +#27322 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.653736228709)); +#27323 = VECTOR('',#27324,1.); +#27324 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27325 = ORIENTED_EDGE('',*,*,#27326,.F.); +#27326 = EDGE_CURVE('',#27295,#27319,#27327,.T.); +#27327 = LINE('',#27328,#27329); +#27328 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.653736228709)); +#27329 = VECTOR('',#27330,1.); +#27330 = DIRECTION('',(-0.,-3.169437117125E-15,1.)); +#27331 = ORIENTED_EDGE('',*,*,#27294,.T.); +#27332 = PLANE('',#27333); +#27333 = AXIS2_PLACEMENT_3D('',#27334,#27335,#27336); +#27334 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.653736228709)); +#27335 = DIRECTION('',(-8.590776519857E-31,-1.,-3.169437117125E-15)); +#27336 = DIRECTION('',(0.,3.169437117125E-15,-1.)); +#27337 = ADVANCED_FACE('',(#27338),#27356,.F.); +#27338 = FACE_BOUND('',#27339,.T.); +#27339 = EDGE_LOOP('',(#27340,#27341,#27349,#27355)); +#27340 = ORIENTED_EDGE('',*,*,#19523,.T.); +#27341 = ORIENTED_EDGE('',*,*,#27342,.F.); +#27342 = EDGE_CURVE('',#27343,#19516,#27345,.T.); +#27343 = VERTEX_POINT('',#27344); +#27344 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.653736228709)); +#27345 = LINE('',#27346,#27347); +#27346 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.653736228709)); +#27347 = VECTOR('',#27348,1.); +#27348 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27349 = ORIENTED_EDGE('',*,*,#27350,.F.); +#27350 = EDGE_CURVE('',#27319,#27343,#27351,.T.); +#27351 = LINE('',#27352,#27353); +#27352 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.653736228709)); +#27353 = VECTOR('',#27354,1.); +#27354 = DIRECTION('',(-0.,1.,-0.)); +#27355 = ORIENTED_EDGE('',*,*,#27318,.T.); +#27356 = PLANE('',#27357); +#27357 = AXIS2_PLACEMENT_3D('',#27358,#27359,#27360); +#27358 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.653736228709)); +#27359 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#27360 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#27361 = ADVANCED_FACE('',(#27362),#27380,.F.); +#27362 = FACE_BOUND('',#27363,.T.); +#27363 = EDGE_LOOP('',(#27364,#27365,#27373,#27379)); +#27364 = ORIENTED_EDGE('',*,*,#19515,.T.); +#27365 = ORIENTED_EDGE('',*,*,#27366,.F.); +#27366 = EDGE_CURVE('',#27367,#19508,#27369,.T.); +#27367 = VERTEX_POINT('',#27368); +#27368 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.665381517372)); +#27369 = LINE('',#27370,#27371); +#27370 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.665381517372)); +#27371 = VECTOR('',#27372,1.); +#27372 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27373 = ORIENTED_EDGE('',*,*,#27374,.F.); +#27374 = EDGE_CURVE('',#27343,#27367,#27375,.T.); +#27375 = LINE('',#27376,#27377); +#27376 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.665381517372)); +#27377 = VECTOR('',#27378,1.); +#27378 = DIRECTION('',(-0.,-9.310221531588E-15,1.)); +#27379 = ORIENTED_EDGE('',*,*,#27342,.T.); +#27380 = PLANE('',#27381); +#27381 = AXIS2_PLACEMENT_3D('',#27382,#27383,#27384); +#27382 = CARTESIAN_POINT('',(2.241,-0.214122087203,1.665381517372)); +#27383 = DIRECTION('',(-2.523540602717E-30,-1.,-9.310221531588E-15)); +#27384 = DIRECTION('',(0.,9.310221531588E-15,-1.)); +#27385 = ADVANCED_FACE('',(#27386),#27404,.F.); +#27386 = FACE_BOUND('',#27387,.T.); +#27387 = EDGE_LOOP('',(#27388,#27389,#27397,#27403)); +#27388 = ORIENTED_EDGE('',*,*,#19507,.T.); +#27389 = ORIENTED_EDGE('',*,*,#27390,.F.); +#27390 = EDGE_CURVE('',#27391,#19500,#27393,.T.); +#27391 = VERTEX_POINT('',#27392); +#27392 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.665381517372)); +#27393 = LINE('',#27394,#27395); +#27394 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.665381517372)); +#27395 = VECTOR('',#27396,1.); +#27396 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27397 = ORIENTED_EDGE('',*,*,#27398,.F.); +#27398 = EDGE_CURVE('',#27367,#27391,#27399,.T.); +#27399 = LINE('',#27400,#27401); +#27400 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.665381517372)); +#27401 = VECTOR('',#27402,1.); +#27402 = DIRECTION('',(-0.,-1.,-0.)); +#27403 = ORIENTED_EDGE('',*,*,#27366,.T.); +#27404 = PLANE('',#27405); +#27405 = AXIS2_PLACEMENT_3D('',#27406,#27407,#27408); +#27406 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.665381517372)); +#27407 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#27408 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#27409 = ADVANCED_FACE('',(#27410),#27428,.F.); +#27410 = FACE_BOUND('',#27411,.T.); +#27411 = EDGE_LOOP('',(#27412,#27413,#27421,#27427)); +#27412 = ORIENTED_EDGE('',*,*,#19499,.T.); +#27413 = ORIENTED_EDGE('',*,*,#27414,.F.); +#27414 = EDGE_CURVE('',#27415,#19492,#27417,.T.); +#27415 = VERTEX_POINT('',#27416); +#27416 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.697925940153)); +#27417 = LINE('',#27418,#27419); +#27418 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.697925940153)); +#27419 = VECTOR('',#27420,1.); +#27420 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27421 = ORIENTED_EDGE('',*,*,#27422,.F.); +#27422 = EDGE_CURVE('',#27391,#27415,#27423,.T.); +#27423 = LINE('',#27424,#27425); +#27424 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.697925940153)); +#27425 = VECTOR('',#27426,1.); +#27426 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#27427 = ORIENTED_EDGE('',*,*,#27390,.T.); +#27428 = PLANE('',#27429); +#27429 = AXIS2_PLACEMENT_3D('',#27430,#27431,#27432); +#27430 = CARTESIAN_POINT('',(2.241,-0.250487620326,1.697925940153)); +#27431 = DIRECTION('',(-9.029921645332E-31,-1.,-3.331453071942E-15)); +#27432 = DIRECTION('',(0.,3.331453071942E-15,-1.)); +#27433 = ADVANCED_FACE('',(#27434),#27452,.F.); +#27434 = FACE_BOUND('',#27435,.T.); +#27435 = EDGE_LOOP('',(#27436,#27437,#27445,#27451)); +#27436 = ORIENTED_EDGE('',*,*,#19491,.T.); +#27437 = ORIENTED_EDGE('',*,*,#27438,.F.); +#27438 = EDGE_CURVE('',#27439,#19484,#27441,.T.); +#27439 = VERTEX_POINT('',#27440); +#27440 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.697925940153)); +#27441 = LINE('',#27442,#27443); +#27442 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.697925940153)); +#27443 = VECTOR('',#27444,1.); +#27444 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27445 = ORIENTED_EDGE('',*,*,#27446,.F.); +#27446 = EDGE_CURVE('',#27415,#27439,#27447,.T.); +#27447 = LINE('',#27448,#27449); +#27448 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.697925940153)); +#27449 = VECTOR('',#27450,1.); +#27450 = DIRECTION('',(-0.,1.,5.524475822673E-15)); +#27451 = ORIENTED_EDGE('',*,*,#27414,.T.); +#27452 = PLANE('',#27453); +#27453 = AXIS2_PLACEMENT_3D('',#27454,#27455,#27456); +#27454 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.697925940153)); +#27455 = DIRECTION('',(2.710505431214E-16,-5.524475822673E-15,1.)); +#27456 = DIRECTION('',(6.129342165232E-47,-1.,-5.524475822673E-15)); +#27457 = ADVANCED_FACE('',(#27458),#27476,.F.); +#27458 = FACE_BOUND('',#27459,.T.); +#27459 = EDGE_LOOP('',(#27460,#27461,#27469,#27475)); +#27460 = ORIENTED_EDGE('',*,*,#19483,.T.); +#27461 = ORIENTED_EDGE('',*,*,#27462,.F.); +#27462 = EDGE_CURVE('',#27463,#19476,#27465,.T.); +#27463 = VERTEX_POINT('',#27464); +#27464 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.709623216712)); +#27465 = LINE('',#27466,#27467); +#27466 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.709623216712)); +#27467 = VECTOR('',#27468,1.); +#27468 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27469 = ORIENTED_EDGE('',*,*,#27470,.F.); +#27470 = EDGE_CURVE('',#27439,#27463,#27471,.T.); +#27471 = LINE('',#27472,#27473); +#27472 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.709623216712)); +#27473 = VECTOR('',#27474,1.); +#27474 = DIRECTION('',(-0.,-0.,1.)); +#27475 = ORIENTED_EDGE('',*,*,#27438,.T.); +#27476 = PLANE('',#27477); +#27477 = AXIS2_PLACEMENT_3D('',#27478,#27479,#27480); +#27478 = CARTESIAN_POINT('',(2.241,-0.211236758985,1.709623216712)); +#27479 = DIRECTION('',(0.,-1.,0.)); +#27480 = DIRECTION('',(0.,-0.,-1.)); +#27481 = ADVANCED_FACE('',(#27482),#27500,.F.); +#27482 = FACE_BOUND('',#27483,.T.); +#27483 = EDGE_LOOP('',(#27484,#27485,#27493,#27499)); +#27484 = ORIENTED_EDGE('',*,*,#19475,.T.); +#27485 = ORIENTED_EDGE('',*,*,#27486,.F.); +#27486 = EDGE_CURVE('',#27487,#19468,#27489,.T.); +#27487 = VERTEX_POINT('',#27488); +#27488 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.709623216712)); +#27489 = LINE('',#27490,#27491); +#27490 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.709623216712)); +#27491 = VECTOR('',#27492,1.); +#27492 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27493 = ORIENTED_EDGE('',*,*,#27494,.F.); +#27494 = EDGE_CURVE('',#27463,#27487,#27495,.T.); +#27495 = LINE('',#27496,#27497); +#27496 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.709623216712)); +#27497 = VECTOR('',#27498,1.); +#27498 = DIRECTION('',(-0.,-1.,-4.139929772825E-15)); +#27499 = ORIENTED_EDGE('',*,*,#27462,.T.); +#27500 = PLANE('',#27501); +#27501 = AXIS2_PLACEMENT_3D('',#27502,#27503,#27504); +#27502 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.709623216712)); +#27503 = DIRECTION('',(-2.710505431214E-16,4.139929772825E-15,-1.)); +#27504 = DIRECTION('',(6.285741219558E-48,1.,4.139929772825E-15)); +#27505 = ADVANCED_FACE('',(#27506),#27524,.F.); +#27506 = FACE_BOUND('',#27507,.T.); +#27507 = EDGE_LOOP('',(#27508,#27509,#27517,#27523)); +#27508 = ORIENTED_EDGE('',*,*,#19467,.T.); +#27509 = ORIENTED_EDGE('',*,*,#27510,.F.); +#27510 = EDGE_CURVE('',#27511,#19460,#27513,.T.); +#27511 = VERTEX_POINT('',#27512); +#27512 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.607934892496)); +#27513 = LINE('',#27514,#27515); +#27514 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.607934892496)); +#27515 = VECTOR('',#27516,1.); +#27516 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27517 = ORIENTED_EDGE('',*,*,#27518,.F.); +#27518 = EDGE_CURVE('',#27487,#27511,#27519,.T.); +#27519 = LINE('',#27520,#27521); +#27520 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.607934892496)); +#27521 = VECTOR('',#27522,1.); +#27522 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#27523 = ORIENTED_EDGE('',*,*,#27486,.T.); +#27524 = PLANE('',#27525); +#27525 = AXIS2_PLACEMENT_3D('',#27526,#27527,#27528); +#27526 = CARTESIAN_POINT('',(2.241,-0.263614564019,1.607934892496)); +#27527 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#27528 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#27529 = ADVANCED_FACE('',(#27530),#27541,.F.); +#27530 = FACE_BOUND('',#27531,.T.); +#27531 = EDGE_LOOP('',(#27532,#27533,#27534,#27540)); +#27532 = ORIENTED_EDGE('',*,*,#19459,.T.); +#27533 = ORIENTED_EDGE('',*,*,#27279,.F.); +#27534 = ORIENTED_EDGE('',*,*,#27535,.F.); +#27535 = EDGE_CURVE('',#27511,#27272,#27536,.T.); +#27536 = LINE('',#27537,#27538); +#27537 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.607934892496)); +#27538 = VECTOR('',#27539,1.); +#27539 = DIRECTION('',(-0.,1.,3.964809169307E-15)); +#27540 = ORIENTED_EDGE('',*,*,#27510,.T.); +#27541 = PLANE('',#27542); +#27542 = AXIS2_PLACEMENT_3D('',#27543,#27544,#27545); +#27543 = CARTESIAN_POINT('',(2.241,-0.208923297621,1.607934892496)); +#27544 = DIRECTION('',(2.710505431214E-16,-3.964809169307E-15,1.)); +#27545 = DIRECTION('',(4.597641757179E-47,-1.,-3.964809169307E-15)); +#27546 = ADVANCED_FACE('',(#27547),#27561,.F.); +#27547 = FACE_BOUND('',#27548,.T.); +#27548 = EDGE_LOOP('',(#27549,#27550,#27551,#27552,#27553,#27554,#27555, + #27556,#27557,#27558,#27559,#27560)); +#27549 = ORIENTED_EDGE('',*,*,#27271,.T.); +#27550 = ORIENTED_EDGE('',*,*,#27302,.T.); +#27551 = ORIENTED_EDGE('',*,*,#27326,.T.); +#27552 = ORIENTED_EDGE('',*,*,#27350,.T.); +#27553 = ORIENTED_EDGE('',*,*,#27374,.T.); +#27554 = ORIENTED_EDGE('',*,*,#27398,.T.); +#27555 = ORIENTED_EDGE('',*,*,#27422,.T.); +#27556 = ORIENTED_EDGE('',*,*,#27446,.T.); +#27557 = ORIENTED_EDGE('',*,*,#27470,.T.); +#27558 = ORIENTED_EDGE('',*,*,#27494,.T.); +#27559 = ORIENTED_EDGE('',*,*,#27518,.T.); +#27560 = ORIENTED_EDGE('',*,*,#27535,.T.); +#27561 = PLANE('',#27562); +#27562 = AXIS2_PLACEMENT_3D('',#27563,#27564,#27565); +#27563 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#27564 = DIRECTION('',(-1.,0.,-0.)); +#27565 = DIRECTION('',(0.,0.,1.)); +#27566 = ADVANCED_FACE('',(#27567,#27689),#27761,.T.); +#27567 = FACE_BOUND('',#27568,.T.); +#27568 = EDGE_LOOP('',(#27569,#27580,#27588,#27597,#27606,#27614,#27623, + #27632,#27641,#27650,#27658,#27666,#27674,#27682)); +#27569 = ORIENTED_EDGE('',*,*,#27570,.T.); +#27570 = EDGE_CURVE('',#27571,#27573,#27575,.T.); +#27571 = VERTEX_POINT('',#27572); +#27572 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#27573 = VERTEX_POINT('',#27574); +#27574 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.675467169161)); +#27575 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27576,#27577,#27578,#27579), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#27576 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#27577 = CARTESIAN_POINT('',(2.241,-0.174091407424,1.682225595617)); +#27578 = CARTESIAN_POINT('',(2.241,-0.182435464703,1.679990116096)); +#27579 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.675467169161)); +#27580 = ORIENTED_EDGE('',*,*,#27581,.T.); +#27581 = EDGE_CURVE('',#27573,#27582,#27584,.T.); +#27582 = VERTEX_POINT('',#27583); +#27583 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27584 = LINE('',#27585,#27586); +#27585 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27586 = VECTOR('',#27587,1.); +#27587 = DIRECTION('',(-0.,8.762561441095E-15,-1.)); +#27588 = ORIENTED_EDGE('',*,*,#27589,.T.); +#27589 = EDGE_CURVE('',#27582,#27590,#27592,.T.); +#27590 = VERTEX_POINT('',#27591); +#27591 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27592 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27593,#27594,#27595,#27596), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#27593 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27594 = CARTESIAN_POINT('',(2.241,-0.182461458651,1.668916694288)); +#27595 = CARTESIAN_POINT('',(2.241,-0.174533304539,1.671880004349)); +#27596 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27597 = ORIENTED_EDGE('',*,*,#27598,.T.); +#27598 = EDGE_CURVE('',#27590,#27599,#27601,.T.); +#27599 = VERTEX_POINT('',#27600); +#27600 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.65410014398)); +#27601 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27602,#27603,#27604,#27605), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#27602 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27603 = CARTESIAN_POINT('',(2.241,-0.156025613628,1.671880004349)); +#27604 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.665953384226)); +#27605 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.65410014398)); +#27606 = ORIENTED_EDGE('',*,*,#27607,.T.); +#27607 = EDGE_CURVE('',#27599,#27608,#27610,.T.); +#27608 = VERTEX_POINT('',#27609); +#27609 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27610 = LINE('',#27611,#27612); +#27611 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27612 = VECTOR('',#27613,1.); +#27613 = DIRECTION('',(-0.,-0.990328603988,-0.138741688482)); +#27614 = ORIENTED_EDGE('',*,*,#27615,.T.); +#27615 = EDGE_CURVE('',#27608,#27616,#27618,.T.); +#27616 = VERTEX_POINT('',#27617); +#27617 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27618 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27619,#27620,#27621,#27622), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#27619 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27620 = CARTESIAN_POINT('',(2.241,-0.188700006148,1.648849366503)); +#27621 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.640947206339)); +#27622 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27623 = ORIENTED_EDGE('',*,*,#27624,.T.); +#27624 = EDGE_CURVE('',#27616,#27625,#27627,.T.); +#27625 = VERTEX_POINT('',#27626); +#27626 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27627 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27628,#27629,#27630,#27631), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#27628 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27629 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.620879878554)); +#27630 = CARTESIAN_POINT('',(2.241,-0.19465262022,1.615733076868)); +#27631 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27632 = ORIENTED_EDGE('',*,*,#27633,.T.); +#27633 = EDGE_CURVE('',#27625,#27634,#27636,.T.); +#27634 = VERTEX_POINT('',#27635); +#27635 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27636 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27637,#27638,#27639,#27640), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#27637 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27638 = CARTESIAN_POINT('',(2.241,-0.186334556889,1.608142844079)); +#27639 = CARTESIAN_POINT('',(2.241,-0.180745858089,1.606219291934)); +#27640 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27641 = ORIENTED_EDGE('',*,*,#27642,.T.); +#27642 = EDGE_CURVE('',#27634,#27643,#27645,.T.); +#27643 = VERTEX_POINT('',#27644); +#27644 = CARTESIAN_POINT('',(2.241,-0.151450678797,1.619164277992)); +#27645 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27646,#27647,#27648,#27649), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#27646 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27647 = CARTESIAN_POINT('',(2.241,-0.163901779844,1.606219291934)); +#27648 = CARTESIAN_POINT('',(2.241,-0.156467510743,1.610534287287)); +#27649 = CARTESIAN_POINT('',(2.241,-0.151450678797,1.619164277992)); +#27650 = ORIENTED_EDGE('',*,*,#27651,.T.); +#27651 = EDGE_CURVE('',#27643,#27652,#27654,.T.); +#27652 = VERTEX_POINT('',#27653); +#27653 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.619164277992)); +#27654 = LINE('',#27655,#27656); +#27655 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.619164277992)); +#27656 = VECTOR('',#27657,1.); +#27657 = DIRECTION('',(-0.,1.,-0.)); +#27658 = ORIENTED_EDGE('',*,*,#27659,.T.); +#27659 = EDGE_CURVE('',#27652,#27660,#27662,.T.); +#27660 = VERTEX_POINT('',#27661); +#27661 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.607934892496)); +#27662 = LINE('',#27663,#27664); +#27663 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.607934892496)); +#27664 = VECTOR('',#27665,1.); +#27665 = DIRECTION('',(-0.,-0.,-1.)); +#27666 = ORIENTED_EDGE('',*,*,#27667,.T.); +#27667 = EDGE_CURVE('',#27660,#27668,#27670,.T.); +#27668 = VERTEX_POINT('',#27669); +#27669 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.607934892496)); +#27670 = LINE('',#27671,#27672); +#27671 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.607934892496)); +#27672 = VECTOR('',#27673,1.); +#27673 = DIRECTION('',(-0.,1.,-0.)); +#27674 = ORIENTED_EDGE('',*,*,#27675,.T.); +#27675 = EDGE_CURVE('',#27668,#27676,#27678,.T.); +#27676 = VERTEX_POINT('',#27677); +#27677 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#27678 = LINE('',#27679,#27680); +#27679 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#27680 = VECTOR('',#27681,1.); +#27681 = DIRECTION('',(-0.,-2.319788234798E-15,1.)); +#27682 = ORIENTED_EDGE('',*,*,#27683,.T.); +#27683 = EDGE_CURVE('',#27676,#27571,#27684,.T.); +#27684 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27685,#27686,#27687,#27688), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#27685 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#27686 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.673075725953)); +#27687 = CARTESIAN_POINT('',(2.241,-0.147135683444,1.682225595617)); +#27688 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#27689 = FACE_BOUND('',#27690,.T.); +#27690 = EDGE_LOOP('',(#27691,#27702,#27711,#27719,#27727,#27736,#27745, + #27754)); +#27691 = ORIENTED_EDGE('',*,*,#27692,.F.); +#27692 = EDGE_CURVE('',#27693,#27695,#27697,.T.); +#27693 = VERTEX_POINT('',#27694); +#27694 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#27695 = VERTEX_POINT('',#27696); +#27696 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#27697 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27698,#27699,#27700,#27701), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#27698 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#27699 = CARTESIAN_POINT('',(2.241,-0.182669410234,1.635436489382)); +#27700 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.632369203529)); +#27701 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#27702 = ORIENTED_EDGE('',*,*,#27703,.F.); +#27703 = EDGE_CURVE('',#27704,#27693,#27706,.T.); +#27704 = VERTEX_POINT('',#27705); +#27705 = CARTESIAN_POINT('',(2.241,-0.168112799406,1.642090940047)); +#27706 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27707,#27708,#27709,#27710), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#27707 = CARTESIAN_POINT('',(2.241,-0.168112799406,1.642090940047)); +#27708 = CARTESIAN_POINT('',(2.241,-0.174065413476,1.641259133713)); +#27709 = CARTESIAN_POINT('',(2.241,-0.178172457246,1.639803472631)); +#27710 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#27711 = ORIENTED_EDGE('',*,*,#27712,.F.); +#27712 = EDGE_CURVE('',#27713,#27704,#27715,.T.); +#27713 = VERTEX_POINT('',#27714); +#27714 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.644378407463)); +#27715 = LINE('',#27716,#27717); +#27716 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.644378407463)); +#27717 = VECTOR('',#27718,1.); +#27718 = DIRECTION('',(0.,-0.9910683663,-0.133354764894)); +#27719 = ORIENTED_EDGE('',*,*,#27720,.F.); +#27720 = EDGE_CURVE('',#27721,#27713,#27723,.T.); +#27721 = VERTEX_POINT('',#27722); +#27722 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#27723 = LINE('',#27724,#27725); +#27724 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#27725 = VECTOR('',#27726,1.); +#27726 = DIRECTION('',(0.,0.,1.)); +#27727 = ORIENTED_EDGE('',*,*,#27728,.F.); +#27728 = EDGE_CURVE('',#27729,#27721,#27731,.T.); +#27729 = VERTEX_POINT('',#27730); +#27730 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#27731 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27732,#27733,#27734,#27735), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#27732 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#27733 = CARTESIAN_POINT('',(2.241,-0.152932333827,1.626494571302)); +#27734 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.631433421404)); +#27735 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#27736 = ORIENTED_EDGE('',*,*,#27737,.F.); +#27737 = EDGE_CURVE('',#27738,#27729,#27740,.T.); +#27738 = VERTEX_POINT('',#27739); +#27739 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#27740 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27741,#27742,#27743,#27744), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#27741 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#27742 = CARTESIAN_POINT('',(2.241,-0.164811568021,1.616668858993)); +#27743 = CARTESIAN_POINT('',(2.241,-0.160184645294,1.618644399034)); +#27744 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#27745 = ORIENTED_EDGE('',*,*,#27746,.F.); +#27746 = EDGE_CURVE('',#27747,#27738,#27749,.T.); +#27747 = VERTEX_POINT('',#27748); +#27748 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#27749 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27750,#27751,#27752,#27753), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#27750 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#27751 = CARTESIAN_POINT('',(2.241,-0.177678572236,1.617760604805)); +#27752 = CARTESIAN_POINT('',(2.241,-0.174429328747,1.616668858993)); +#27753 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#27754 = ORIENTED_EDGE('',*,*,#27755,.F.); +#27755 = EDGE_CURVE('',#27695,#27747,#27756,.T.); +#27756 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27757,#27758,#27759,#27760), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#27757 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#27758 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.624934934428)); +#27759 = CARTESIAN_POINT('',(2.241,-0.18259142839,1.622127588053)); +#27760 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#27761 = PLANE('',#27762); +#27762 = AXIS2_PLACEMENT_3D('',#27763,#27764,#27765); +#27763 = CARTESIAN_POINT('',(2.241,-0.17798075188,1.68054248749)); +#27764 = DIRECTION('',(1.,0.,0.)); +#27765 = DIRECTION('',(0.,0.,-1.)); +#27766 = ADVANCED_FACE('',(#27767),#27783,.F.); +#27767 = FACE_BOUND('',#27768,.F.); +#27768 = EDGE_LOOP('',(#27769,#27775,#27776,#27782)); +#27769 = ORIENTED_EDGE('',*,*,#27770,.F.); +#27770 = EDGE_CURVE('',#27571,#19328,#27771,.T.); +#27771 = LINE('',#27772,#27773); +#27772 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#27773 = VECTOR('',#27774,1.); +#27774 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27775 = ORIENTED_EDGE('',*,*,#27570,.T.); +#27776 = ORIENTED_EDGE('',*,*,#27777,.T.); +#27777 = EDGE_CURVE('',#27573,#19330,#27778,.T.); +#27778 = LINE('',#27779,#27780); +#27779 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.675467169161)); +#27780 = VECTOR('',#27781,1.); +#27781 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27782 = ORIENTED_EDGE('',*,*,#19327,.F.); +#27783 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27784,#27785) + ,(#27786,#27787) + ,(#27788,#27789) + ,(#27790,#27791 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27784 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#27785 = CARTESIAN_POINT('',(2.24,-0.164629610386,1.682225595617)); +#27786 = CARTESIAN_POINT('',(2.241,-0.174091407424,1.682225595617)); +#27787 = CARTESIAN_POINT('',(2.24,-0.174091407424,1.682225595617)); +#27788 = CARTESIAN_POINT('',(2.241,-0.182435464703,1.679990116096)); +#27789 = CARTESIAN_POINT('',(2.24,-0.182435464703,1.679990116096)); +#27790 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.675467169161)); +#27791 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.675467169161)); +#27792 = ADVANCED_FACE('',(#27793),#27804,.F.); +#27793 = FACE_BOUND('',#27794,.T.); +#27794 = EDGE_LOOP('',(#27795,#27796,#27802,#27803)); +#27795 = ORIENTED_EDGE('',*,*,#19441,.T.); +#27796 = ORIENTED_EDGE('',*,*,#27797,.F.); +#27797 = EDGE_CURVE('',#27582,#19433,#27798,.T.); +#27798 = LINE('',#27799,#27800); +#27799 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27800 = VECTOR('',#27801,1.); +#27801 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27802 = ORIENTED_EDGE('',*,*,#27581,.F.); +#27803 = ORIENTED_EDGE('',*,*,#27777,.T.); +#27804 = PLANE('',#27805); +#27805 = AXIS2_PLACEMENT_3D('',#27806,#27807,#27808); +#27806 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27807 = DIRECTION('',(2.375097037743E-30,1.,8.762561441095E-15)); +#27808 = DIRECTION('',(0.,-8.762561441095E-15,1.)); +#27809 = ADVANCED_FACE('',(#27810),#27821,.F.); +#27810 = FACE_BOUND('',#27811,.F.); +#27811 = EDGE_LOOP('',(#27812,#27813,#27814,#27820)); +#27812 = ORIENTED_EDGE('',*,*,#27797,.F.); +#27813 = ORIENTED_EDGE('',*,*,#27589,.T.); +#27814 = ORIENTED_EDGE('',*,*,#27815,.T.); +#27815 = EDGE_CURVE('',#27590,#19424,#27816,.T.); +#27816 = LINE('',#27817,#27818); +#27817 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27818 = VECTOR('',#27819,1.); +#27819 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27820 = ORIENTED_EDGE('',*,*,#19432,.F.); +#27821 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27822,#27823) + ,(#27824,#27825) + ,(#27826,#27827) + ,(#27828,#27829 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27822 = CARTESIAN_POINT('',(2.241,-0.189635788273,1.663094049956)); +#27823 = CARTESIAN_POINT('',(2.24,-0.189635788273,1.663094049956)); +#27824 = CARTESIAN_POINT('',(2.241,-0.182461458651,1.668916694288)); +#27825 = CARTESIAN_POINT('',(2.24,-0.182461458651,1.668916694288)); +#27826 = CARTESIAN_POINT('',(2.241,-0.174533304539,1.671880004349)); +#27827 = CARTESIAN_POINT('',(2.24,-0.174533304539,1.671880004349)); +#27828 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27829 = CARTESIAN_POINT('',(2.24,-0.16582533199,1.671880004349)); +#27830 = ADVANCED_FACE('',(#27831),#27842,.F.); +#27831 = FACE_BOUND('',#27832,.F.); +#27832 = EDGE_LOOP('',(#27833,#27834,#27835,#27841)); +#27833 = ORIENTED_EDGE('',*,*,#27815,.F.); +#27834 = ORIENTED_EDGE('',*,*,#27598,.T.); +#27835 = ORIENTED_EDGE('',*,*,#27836,.T.); +#27836 = EDGE_CURVE('',#27599,#19416,#27837,.T.); +#27837 = LINE('',#27838,#27839); +#27838 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.65410014398)); +#27839 = VECTOR('',#27840,1.); +#27840 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27841 = ORIENTED_EDGE('',*,*,#19423,.F.); +#27842 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27843,#27844) + ,(#27845,#27846) + ,(#27847,#27848) + ,(#27849,#27850 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27843 = CARTESIAN_POINT('',(2.241,-0.16582533199,1.671880004349)); +#27844 = CARTESIAN_POINT('',(2.24,-0.16582533199,1.671880004349)); +#27845 = CARTESIAN_POINT('',(2.241,-0.156025613628,1.671880004349)); +#27846 = CARTESIAN_POINT('',(2.24,-0.156025613628,1.671880004349)); +#27847 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.665953384226)); +#27848 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.665953384226)); +#27849 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.65410014398)); +#27850 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.65410014398)); +#27851 = ADVANCED_FACE('',(#27852),#27863,.F.); +#27852 = FACE_BOUND('',#27853,.T.); +#27853 = EDGE_LOOP('',(#27854,#27855,#27861,#27862)); +#27854 = ORIENTED_EDGE('',*,*,#19415,.T.); +#27855 = ORIENTED_EDGE('',*,*,#27856,.F.); +#27856 = EDGE_CURVE('',#27608,#19407,#27857,.T.); +#27857 = LINE('',#27858,#27859); +#27858 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27859 = VECTOR('',#27860,1.); +#27860 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27861 = ORIENTED_EDGE('',*,*,#27607,.F.); +#27862 = ORIENTED_EDGE('',*,*,#27836,.T.); +#27863 = PLANE('',#27864); +#27864 = AXIS2_PLACEMENT_3D('',#27865,#27866,#27867); +#27865 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27866 = DIRECTION('',(-2.684291059796E-16,0.138741688482, + -0.990328603988)); +#27867 = DIRECTION('',(5.400264008226E-33,0.990328603988,0.138741688482) + ); +#27868 = ADVANCED_FACE('',(#27869),#27880,.F.); +#27869 = FACE_BOUND('',#27870,.F.); +#27870 = EDGE_LOOP('',(#27871,#27872,#27873,#27879)); +#27871 = ORIENTED_EDGE('',*,*,#27856,.F.); +#27872 = ORIENTED_EDGE('',*,*,#27615,.T.); +#27873 = ORIENTED_EDGE('',*,*,#27874,.T.); +#27874 = EDGE_CURVE('',#27616,#19398,#27875,.T.); +#27875 = LINE('',#27876,#27877); +#27876 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27877 = VECTOR('',#27878,1.); +#27878 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27879 = ORIENTED_EDGE('',*,*,#19406,.F.); +#27880 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27881,#27882) + ,(#27883,#27884) + ,(#27885,#27886) + ,(#27887,#27888 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27881 = CARTESIAN_POINT('',(2.241,-0.172635746342,1.651084846023)); +#27882 = CARTESIAN_POINT('',(2.24,-0.172635746342,1.651084846023)); +#27883 = CARTESIAN_POINT('',(2.241,-0.188700006148,1.648849366503)); +#27884 = CARTESIAN_POINT('',(2.24,-0.188700006148,1.648849366503)); +#27885 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.640947206339)); +#27886 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.640947206339)); +#27887 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27888 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.627378365531)); +#27889 = ADVANCED_FACE('',(#27890),#27901,.F.); +#27890 = FACE_BOUND('',#27891,.F.); +#27891 = EDGE_LOOP('',(#27892,#27893,#27894,#27900)); +#27892 = ORIENTED_EDGE('',*,*,#27874,.F.); +#27893 = ORIENTED_EDGE('',*,*,#27624,.T.); +#27894 = ORIENTED_EDGE('',*,*,#27895,.T.); +#27895 = EDGE_CURVE('',#27625,#19389,#27896,.T.); +#27896 = LINE('',#27897,#27898); +#27897 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27898 = VECTOR('',#27899,1.); +#27899 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27900 = ORIENTED_EDGE('',*,*,#19397,.F.); +#27901 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27902,#27903) + ,(#27904,#27905) + ,(#27906,#27907) + ,(#27908,#27909 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27902 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.627378365531)); +#27903 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.627378365531)); +#27904 = CARTESIAN_POINT('',(2.241,-0.196732136052,1.620879878554)); +#27905 = CARTESIAN_POINT('',(2.24,-0.196732136052,1.620879878554)); +#27906 = CARTESIAN_POINT('',(2.241,-0.19465262022,1.615733076868)); +#27907 = CARTESIAN_POINT('',(2.24,-0.19465262022,1.615733076868)); +#27908 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27909 = CARTESIAN_POINT('',(2.24,-0.190493588554,1.611937960473)); +#27910 = ADVANCED_FACE('',(#27911),#27922,.F.); +#27911 = FACE_BOUND('',#27912,.F.); +#27912 = EDGE_LOOP('',(#27913,#27914,#27915,#27921)); +#27913 = ORIENTED_EDGE('',*,*,#27895,.F.); +#27914 = ORIENTED_EDGE('',*,*,#27633,.T.); +#27915 = ORIENTED_EDGE('',*,*,#27916,.T.); +#27916 = EDGE_CURVE('',#27634,#19380,#27917,.T.); +#27917 = LINE('',#27918,#27919); +#27918 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27919 = VECTOR('',#27920,1.); +#27920 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27921 = ORIENTED_EDGE('',*,*,#19388,.F.); +#27922 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27923,#27924) + ,(#27925,#27926) + ,(#27927,#27928) + ,(#27929,#27930 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27923 = CARTESIAN_POINT('',(2.241,-0.190493588554,1.611937960473)); +#27924 = CARTESIAN_POINT('',(2.24,-0.190493588554,1.611937960473)); +#27925 = CARTESIAN_POINT('',(2.241,-0.186334556889,1.608142844079)); +#27926 = CARTESIAN_POINT('',(2.24,-0.186334556889,1.608142844079)); +#27927 = CARTESIAN_POINT('',(2.241,-0.180745858089,1.606219291934)); +#27928 = CARTESIAN_POINT('',(2.24,-0.180745858089,1.606219291934)); +#27929 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27930 = CARTESIAN_POINT('',(2.24,-0.173701498206,1.606219291934)); +#27931 = ADVANCED_FACE('',(#27932),#27943,.F.); +#27932 = FACE_BOUND('',#27933,.F.); +#27933 = EDGE_LOOP('',(#27934,#27935,#27936,#27942)); +#27934 = ORIENTED_EDGE('',*,*,#27916,.F.); +#27935 = ORIENTED_EDGE('',*,*,#27642,.T.); +#27936 = ORIENTED_EDGE('',*,*,#27937,.T.); +#27937 = EDGE_CURVE('',#27643,#19372,#27938,.T.); +#27938 = LINE('',#27939,#27940); +#27939 = CARTESIAN_POINT('',(2.241,-0.151450678797,1.619164277992)); +#27940 = VECTOR('',#27941,1.); +#27941 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27942 = ORIENTED_EDGE('',*,*,#19379,.F.); +#27943 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#27944,#27945) + ,(#27946,#27947) + ,(#27948,#27949) + ,(#27950,#27951 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#27944 = CARTESIAN_POINT('',(2.241,-0.173701498206,1.606219291934)); +#27945 = CARTESIAN_POINT('',(2.24,-0.173701498206,1.606219291934)); +#27946 = CARTESIAN_POINT('',(2.241,-0.163901779844,1.606219291934)); +#27947 = CARTESIAN_POINT('',(2.24,-0.163901779844,1.606219291934)); +#27948 = CARTESIAN_POINT('',(2.241,-0.156467510743,1.610534287287)); +#27949 = CARTESIAN_POINT('',(2.24,-0.156467510743,1.610534287287)); +#27950 = CARTESIAN_POINT('',(2.241,-0.151450678797,1.619164277992)); +#27951 = CARTESIAN_POINT('',(2.24,-0.151450678797,1.619164277992)); +#27952 = ADVANCED_FACE('',(#27953),#27964,.F.); +#27953 = FACE_BOUND('',#27954,.T.); +#27954 = EDGE_LOOP('',(#27955,#27956,#27962,#27963)); +#27955 = ORIENTED_EDGE('',*,*,#19371,.T.); +#27956 = ORIENTED_EDGE('',*,*,#27957,.F.); +#27957 = EDGE_CURVE('',#27652,#19364,#27958,.T.); +#27958 = LINE('',#27959,#27960); +#27959 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.619164277992)); +#27960 = VECTOR('',#27961,1.); +#27961 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27962 = ORIENTED_EDGE('',*,*,#27651,.F.); +#27963 = ORIENTED_EDGE('',*,*,#27937,.T.); +#27964 = PLANE('',#27965); +#27965 = AXIS2_PLACEMENT_3D('',#27966,#27967,#27968); +#27966 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.619164277992)); +#27967 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#27968 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#27969 = ADVANCED_FACE('',(#27970),#27981,.F.); +#27970 = FACE_BOUND('',#27971,.T.); +#27971 = EDGE_LOOP('',(#27972,#27973,#27979,#27980)); +#27972 = ORIENTED_EDGE('',*,*,#19363,.T.); +#27973 = ORIENTED_EDGE('',*,*,#27974,.F.); +#27974 = EDGE_CURVE('',#27660,#19356,#27975,.T.); +#27975 = LINE('',#27976,#27977); +#27976 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.607934892496)); +#27977 = VECTOR('',#27978,1.); +#27978 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27979 = ORIENTED_EDGE('',*,*,#27659,.F.); +#27980 = ORIENTED_EDGE('',*,*,#27957,.T.); +#27981 = PLANE('',#27982); +#27982 = AXIS2_PLACEMENT_3D('',#27983,#27984,#27985); +#27983 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.607934892496)); +#27984 = DIRECTION('',(-0.,1.,0.)); +#27985 = DIRECTION('',(0.,0.,1.)); +#27986 = ADVANCED_FACE('',(#27987),#27998,.F.); +#27987 = FACE_BOUND('',#27988,.T.); +#27988 = EDGE_LOOP('',(#27989,#27990,#27996,#27997)); +#27989 = ORIENTED_EDGE('',*,*,#19355,.T.); +#27990 = ORIENTED_EDGE('',*,*,#27991,.F.); +#27991 = EDGE_CURVE('',#27668,#19348,#27992,.T.); +#27992 = LINE('',#27993,#27994); +#27993 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.607934892496)); +#27994 = VECTOR('',#27995,1.); +#27995 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#27996 = ORIENTED_EDGE('',*,*,#27667,.F.); +#27997 = ORIENTED_EDGE('',*,*,#27974,.T.); +#27998 = PLANE('',#27999); +#27999 = AXIS2_PLACEMENT_3D('',#28000,#28001,#28002); +#28000 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.607934892496)); +#28001 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#28002 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#28003 = ADVANCED_FACE('',(#28004),#28015,.F.); +#28004 = FACE_BOUND('',#28005,.T.); +#28005 = EDGE_LOOP('',(#28006,#28007,#28013,#28014)); +#28006 = ORIENTED_EDGE('',*,*,#19347,.T.); +#28007 = ORIENTED_EDGE('',*,*,#28008,.F.); +#28008 = EDGE_CURVE('',#27676,#19339,#28009,.T.); +#28009 = LINE('',#28010,#28011); +#28010 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#28011 = VECTOR('',#28012,1.); +#28012 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28013 = ORIENTED_EDGE('',*,*,#27675,.F.); +#28014 = ORIENTED_EDGE('',*,*,#27991,.T.); +#28015 = PLANE('',#28016); +#28016 = AXIS2_PLACEMENT_3D('',#28017,#28018,#28019); +#28017 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#28018 = DIRECTION('',(-6.287798609686E-31,-1.,-2.319788234798E-15)); +#28019 = DIRECTION('',(0.,2.319788234798E-15,-1.)); +#28020 = ADVANCED_FACE('',(#28021),#28027,.F.); +#28021 = FACE_BOUND('',#28022,.F.); +#28022 = EDGE_LOOP('',(#28023,#28024,#28025,#28026)); +#28023 = ORIENTED_EDGE('',*,*,#28008,.F.); +#28024 = ORIENTED_EDGE('',*,*,#27683,.T.); +#28025 = ORIENTED_EDGE('',*,*,#27770,.T.); +#28026 = ORIENTED_EDGE('',*,*,#19338,.F.); +#28027 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28028,#28029) + ,(#28030,#28031) + ,(#28032,#28033) + ,(#28034,#28035 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28028 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.654672010834)); +#28029 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.654672010834)); +#28030 = CARTESIAN_POINT('',(2.241,-0.138375722999,1.673075725953)); +#28031 = CARTESIAN_POINT('',(2.24,-0.138375722999,1.673075725953)); +#28032 = CARTESIAN_POINT('',(2.241,-0.147135683444,1.682225595617)); +#28033 = CARTESIAN_POINT('',(2.24,-0.147135683444,1.682225595617)); +#28034 = CARTESIAN_POINT('',(2.241,-0.164629610386,1.682225595617)); +#28035 = CARTESIAN_POINT('',(2.24,-0.164629610386,1.682225595617)); +#28036 = ADVANCED_FACE('',(#28037),#28063,.T.); +#28037 = FACE_BOUND('',#28038,.T.); +#28038 = EDGE_LOOP('',(#28039,#28050,#28056,#28057)); +#28039 = ORIENTED_EDGE('',*,*,#28040,.F.); +#28040 = EDGE_CURVE('',#28041,#28043,#28045,.T.); +#28041 = VERTEX_POINT('',#28042); +#28042 = CARTESIAN_POINT('',(2.24,-0.168112799406,1.642090940047)); +#28043 = VERTEX_POINT('',#28044); +#28044 = CARTESIAN_POINT('',(2.24,-0.180433930714,1.637619981006)); +#28045 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28046,#28047,#28048,#28049), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#28046 = CARTESIAN_POINT('',(2.24,-0.168112799406,1.642090940047)); +#28047 = CARTESIAN_POINT('',(2.24,-0.174065413476,1.641259133713)); +#28048 = CARTESIAN_POINT('',(2.24,-0.178172457246,1.639803472631)); +#28049 = CARTESIAN_POINT('',(2.24,-0.180433930714,1.637619981006)); +#28050 = ORIENTED_EDGE('',*,*,#28051,.F.); +#28051 = EDGE_CURVE('',#27704,#28041,#28052,.T.); +#28052 = LINE('',#28053,#28054); +#28053 = CARTESIAN_POINT('',(2.241,-0.168112799406,1.642090940047)); +#28054 = VECTOR('',#28055,1.); +#28055 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28056 = ORIENTED_EDGE('',*,*,#27703,.T.); +#28057 = ORIENTED_EDGE('',*,*,#28058,.T.); +#28058 = EDGE_CURVE('',#27693,#28043,#28059,.T.); +#28059 = LINE('',#28060,#28061); +#28060 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#28061 = VECTOR('',#28062,1.); +#28062 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28063 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28064,#28065) + ,(#28066,#28067) + ,(#28068,#28069) + ,(#28070,#28071 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28064 = CARTESIAN_POINT('',(2.241,-0.168112799406,1.642090940047)); +#28065 = CARTESIAN_POINT('',(2.24,-0.168112799406,1.642090940047)); +#28066 = CARTESIAN_POINT('',(2.241,-0.174065413476,1.641259133713)); +#28067 = CARTESIAN_POINT('',(2.24,-0.174065413476,1.641259133713)); +#28068 = CARTESIAN_POINT('',(2.241,-0.178172457246,1.639803472631)); +#28069 = CARTESIAN_POINT('',(2.24,-0.178172457246,1.639803472631)); +#28070 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#28071 = CARTESIAN_POINT('',(2.24,-0.180433930714,1.637619981006)); +#28072 = ADVANCED_FACE('',(#28073),#28092,.T.); +#28073 = FACE_BOUND('',#28074,.T.); +#28074 = EDGE_LOOP('',(#28075,#28084,#28085,#28086)); +#28075 = ORIENTED_EDGE('',*,*,#28076,.F.); +#28076 = EDGE_CURVE('',#28043,#28077,#28079,.T.); +#28077 = VERTEX_POINT('',#28078); +#28078 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.628418123447)); +#28079 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28080,#28081,#28082,#28083), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#28080 = CARTESIAN_POINT('',(2.24,-0.180433930714,1.637619981006)); +#28081 = CARTESIAN_POINT('',(2.24,-0.182669410234,1.635436489382)); +#28082 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.632369203529)); +#28083 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.628418123447)); +#28084 = ORIENTED_EDGE('',*,*,#28058,.F.); +#28085 = ORIENTED_EDGE('',*,*,#27692,.T.); +#28086 = ORIENTED_EDGE('',*,*,#28087,.T.); +#28087 = EDGE_CURVE('',#27695,#28077,#28088,.T.); +#28088 = LINE('',#28089,#28090); +#28089 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#28090 = VECTOR('',#28091,1.); +#28091 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28092 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28093,#28094) + ,(#28095,#28096) + ,(#28097,#28098) + ,(#28099,#28100 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28093 = CARTESIAN_POINT('',(2.241,-0.180433930714,1.637619981006)); +#28094 = CARTESIAN_POINT('',(2.24,-0.180433930714,1.637619981006)); +#28095 = CARTESIAN_POINT('',(2.241,-0.182669410234,1.635436489382)); +#28096 = CARTESIAN_POINT('',(2.24,-0.182669410234,1.635436489382)); +#28097 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.632369203529)); +#28098 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.632369203529)); +#28099 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#28100 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.628418123447)); +#28101 = ADVANCED_FACE('',(#28102),#28121,.T.); +#28102 = FACE_BOUND('',#28103,.T.); +#28103 = EDGE_LOOP('',(#28104,#28113,#28114,#28115)); +#28104 = ORIENTED_EDGE('',*,*,#28105,.F.); +#28105 = EDGE_CURVE('',#28077,#28106,#28108,.T.); +#28106 = VERTEX_POINT('',#28107); +#28107 = CARTESIAN_POINT('',(2.24,-0.180122003339,1.619944096429)); +#28108 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28109,#28110,#28111,#28112), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#28109 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.628418123447)); +#28110 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.624934934428)); +#28111 = CARTESIAN_POINT('',(2.24,-0.18259142839,1.622127588053)); +#28112 = CARTESIAN_POINT('',(2.24,-0.180122003339,1.619944096429)); +#28113 = ORIENTED_EDGE('',*,*,#28087,.F.); +#28114 = ORIENTED_EDGE('',*,*,#27755,.T.); +#28115 = ORIENTED_EDGE('',*,*,#28116,.T.); +#28116 = EDGE_CURVE('',#27747,#28106,#28117,.T.); +#28117 = LINE('',#28118,#28119); +#28118 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#28119 = VECTOR('',#28120,1.); +#28120 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28121 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28122,#28123) + ,(#28124,#28125) + ,(#28126,#28127) + ,(#28128,#28129 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28122 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.628418123447)); +#28123 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.628418123447)); +#28124 = CARTESIAN_POINT('',(2.241,-0.183813143942,1.624934934428)); +#28125 = CARTESIAN_POINT('',(2.24,-0.183813143942,1.624934934428)); +#28126 = CARTESIAN_POINT('',(2.241,-0.18259142839,1.622127588053)); +#28127 = CARTESIAN_POINT('',(2.24,-0.18259142839,1.622127588053)); +#28128 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#28129 = CARTESIAN_POINT('',(2.24,-0.180122003339,1.619944096429)); +#28130 = ADVANCED_FACE('',(#28131),#28150,.T.); +#28131 = FACE_BOUND('',#28132,.T.); +#28132 = EDGE_LOOP('',(#28133,#28142,#28143,#28144)); +#28133 = ORIENTED_EDGE('',*,*,#28134,.F.); +#28134 = EDGE_CURVE('',#28106,#28135,#28137,.T.); +#28135 = VERTEX_POINT('',#28136); +#28136 = CARTESIAN_POINT('',(2.24,-0.170400266821,1.616668858993)); +#28137 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28138,#28139,#28140,#28141), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#28138 = CARTESIAN_POINT('',(2.24,-0.180122003339,1.619944096429)); +#28139 = CARTESIAN_POINT('',(2.24,-0.177678572236,1.617760604805)); +#28140 = CARTESIAN_POINT('',(2.24,-0.174429328747,1.616668858993)); +#28141 = CARTESIAN_POINT('',(2.24,-0.170400266821,1.616668858993)); +#28142 = ORIENTED_EDGE('',*,*,#28116,.F.); +#28143 = ORIENTED_EDGE('',*,*,#27746,.T.); +#28144 = ORIENTED_EDGE('',*,*,#28145,.T.); +#28145 = EDGE_CURVE('',#27738,#28135,#28146,.T.); +#28146 = LINE('',#28147,#28148); +#28147 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#28148 = VECTOR('',#28149,1.); +#28149 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28150 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28151,#28152) + ,(#28153,#28154) + ,(#28155,#28156) + ,(#28157,#28158 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28151 = CARTESIAN_POINT('',(2.241,-0.180122003339,1.619944096429)); +#28152 = CARTESIAN_POINT('',(2.24,-0.180122003339,1.619944096429)); +#28153 = CARTESIAN_POINT('',(2.241,-0.177678572236,1.617760604805)); +#28154 = CARTESIAN_POINT('',(2.24,-0.177678572236,1.617760604805)); +#28155 = CARTESIAN_POINT('',(2.241,-0.174429328747,1.616668858993)); +#28156 = CARTESIAN_POINT('',(2.24,-0.174429328747,1.616668858993)); +#28157 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#28158 = CARTESIAN_POINT('',(2.24,-0.170400266821,1.616668858993)); +#28159 = ADVANCED_FACE('',(#28160),#28179,.T.); +#28160 = FACE_BOUND('',#28161,.T.); +#28161 = EDGE_LOOP('',(#28162,#28171,#28172,#28173)); +#28162 = ORIENTED_EDGE('',*,*,#28163,.F.); +#28163 = EDGE_CURVE('',#28135,#28164,#28166,.T.); +#28164 = VERTEX_POINT('',#28165); +#28165 = CARTESIAN_POINT('',(2.24,-0.156571486534,1.622595479116)); +#28166 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28167,#28168,#28169,#28170), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#28167 = CARTESIAN_POINT('',(2.24,-0.170400266821,1.616668858993)); +#28168 = CARTESIAN_POINT('',(2.24,-0.164811568021,1.616668858993)); +#28169 = CARTESIAN_POINT('',(2.24,-0.160184645294,1.618644399034)); +#28170 = CARTESIAN_POINT('',(2.24,-0.156571486534,1.622595479116)); +#28171 = ORIENTED_EDGE('',*,*,#28145,.F.); +#28172 = ORIENTED_EDGE('',*,*,#27737,.T.); +#28173 = ORIENTED_EDGE('',*,*,#28174,.T.); +#28174 = EDGE_CURVE('',#27729,#28164,#28175,.T.); +#28175 = LINE('',#28176,#28177); +#28176 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#28177 = VECTOR('',#28178,1.); +#28178 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28179 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28180,#28181) + ,(#28182,#28183) + ,(#28184,#28185) + ,(#28186,#28187 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28180 = CARTESIAN_POINT('',(2.241,-0.170400266821,1.616668858993)); +#28181 = CARTESIAN_POINT('',(2.24,-0.170400266821,1.616668858993)); +#28182 = CARTESIAN_POINT('',(2.241,-0.164811568021,1.616668858993)); +#28183 = CARTESIAN_POINT('',(2.24,-0.164811568021,1.616668858993)); +#28184 = CARTESIAN_POINT('',(2.241,-0.160184645294,1.618644399034)); +#28185 = CARTESIAN_POINT('',(2.24,-0.160184645294,1.618644399034)); +#28186 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#28187 = CARTESIAN_POINT('',(2.24,-0.156571486534,1.622595479116)); +#28188 = ADVANCED_FACE('',(#28189),#28208,.T.); +#28189 = FACE_BOUND('',#28190,.T.); +#28190 = EDGE_LOOP('',(#28191,#28200,#28201,#28202)); +#28191 = ORIENTED_EDGE('',*,*,#28192,.F.); +#28192 = EDGE_CURVE('',#28164,#28193,#28195,.T.); +#28193 = VERTEX_POINT('',#28194); +#28194 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.637412029423)); +#28195 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28196,#28197,#28198,#28199), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#28196 = CARTESIAN_POINT('',(2.24,-0.156571486534,1.622595479116)); +#28197 = CARTESIAN_POINT('',(2.24,-0.152932333827,1.626494571302)); +#28198 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.631433421404)); +#28199 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.637412029423)); +#28200 = ORIENTED_EDGE('',*,*,#28174,.F.); +#28201 = ORIENTED_EDGE('',*,*,#27728,.T.); +#28202 = ORIENTED_EDGE('',*,*,#28203,.T.); +#28203 = EDGE_CURVE('',#27721,#28193,#28204,.T.); +#28204 = LINE('',#28205,#28206); +#28205 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#28206 = VECTOR('',#28207,1.); +#28207 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28208 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28209,#28210) + ,(#28211,#28212) + ,(#28213,#28214) + ,(#28215,#28216 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28209 = CARTESIAN_POINT('',(2.241,-0.156571486534,1.622595479116)); +#28210 = CARTESIAN_POINT('',(2.24,-0.156571486534,1.622595479116)); +#28211 = CARTESIAN_POINT('',(2.241,-0.152932333827,1.626494571302)); +#28212 = CARTESIAN_POINT('',(2.24,-0.152932333827,1.626494571302)); +#28213 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.631433421404)); +#28214 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.631433421404)); +#28215 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#28216 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.637412029423)); +#28217 = ADVANCED_FACE('',(#28218),#28236,.T.); +#28218 = FACE_BOUND('',#28219,.T.); +#28219 = EDGE_LOOP('',(#28220,#28228,#28229,#28230)); +#28220 = ORIENTED_EDGE('',*,*,#28221,.F.); +#28221 = EDGE_CURVE('',#28193,#28222,#28224,.T.); +#28222 = VERTEX_POINT('',#28223); +#28223 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.644378407463)); +#28224 = LINE('',#28225,#28226); +#28225 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.637412029423)); +#28226 = VECTOR('',#28227,1.); +#28227 = DIRECTION('',(0.,0.,1.)); +#28228 = ORIENTED_EDGE('',*,*,#28203,.F.); +#28229 = ORIENTED_EDGE('',*,*,#27720,.T.); +#28230 = ORIENTED_EDGE('',*,*,#28231,.T.); +#28231 = EDGE_CURVE('',#27713,#28222,#28232,.T.); +#28232 = LINE('',#28233,#28234); +#28233 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.644378407463)); +#28234 = VECTOR('',#28235,1.); +#28235 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28236 = PLANE('',#28237); +#28237 = AXIS2_PLACEMENT_3D('',#28238,#28239,#28240); +#28238 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.637412029423)); +#28239 = DIRECTION('',(0.,-1.,0.)); +#28240 = DIRECTION('',(0.,-0.,-1.)); +#28241 = ADVANCED_FACE('',(#28242),#28253,.T.); +#28242 = FACE_BOUND('',#28243,.T.); +#28243 = EDGE_LOOP('',(#28244,#28250,#28251,#28252)); +#28244 = ORIENTED_EDGE('',*,*,#28245,.F.); +#28245 = EDGE_CURVE('',#28222,#28041,#28246,.T.); +#28246 = LINE('',#28247,#28248); +#28247 = CARTESIAN_POINT('',(2.24,-0.151112757474,1.644378407463)); +#28248 = VECTOR('',#28249,1.); +#28249 = DIRECTION('',(0.,-0.9910683663,-0.133354764894)); +#28250 = ORIENTED_EDGE('',*,*,#28231,.F.); +#28251 = ORIENTED_EDGE('',*,*,#27712,.T.); +#28252 = ORIENTED_EDGE('',*,*,#28051,.T.); +#28253 = PLANE('',#28254); +#28254 = AXIS2_PLACEMENT_3D('',#28255,#28256,#28257); +#28255 = CARTESIAN_POINT('',(2.241,-0.151112757474,1.644378407463)); +#28256 = DIRECTION('',(-2.68629618956E-16,0.133354764894,-0.9910683663) + ); +#28257 = DIRECTION('',(3.781934744151E-33,0.9910683663,0.133354764894)); +#28258 = ADVANCED_FACE('',(#28259),#28269,.F.); +#28259 = FACE_BOUND('',#28260,.T.); +#28260 = EDGE_LOOP('',(#28261,#28262,#28263,#28264,#28265,#28266,#28267, + #28268)); +#28261 = ORIENTED_EDGE('',*,*,#28245,.T.); +#28262 = ORIENTED_EDGE('',*,*,#28040,.T.); +#28263 = ORIENTED_EDGE('',*,*,#28076,.T.); +#28264 = ORIENTED_EDGE('',*,*,#28105,.T.); +#28265 = ORIENTED_EDGE('',*,*,#28134,.T.); +#28266 = ORIENTED_EDGE('',*,*,#28163,.T.); +#28267 = ORIENTED_EDGE('',*,*,#28192,.T.); +#28268 = ORIENTED_EDGE('',*,*,#28221,.T.); +#28269 = PLANE('',#28270); +#28270 = AXIS2_PLACEMENT_3D('',#28271,#28272,#28273); +#28271 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#28272 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#28273 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#28274 = ADVANCED_FACE('',(#28275),#28301,.F.); +#28275 = FACE_BOUND('',#28276,.F.); +#28276 = EDGE_LOOP('',(#28277,#28285,#28294,#28300)); +#28277 = ORIENTED_EDGE('',*,*,#28278,.F.); +#28278 = EDGE_CURVE('',#28279,#20128,#28281,.T.); +#28279 = VERTEX_POINT('',#28280); +#28280 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28281 = LINE('',#28282,#28283); +#28282 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28283 = VECTOR('',#28284,1.); +#28284 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28285 = ORIENTED_EDGE('',*,*,#28286,.T.); +#28286 = EDGE_CURVE('',#28279,#28287,#28289,.T.); +#28287 = VERTEX_POINT('',#28288); +#28288 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.623635237032)); +#28289 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28290,#28291,#28292,#28293), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#28290 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28291 = CARTESIAN_POINT('',(2.241,-0.107650876572,1.616616871097)); +#28292 = CARTESIAN_POINT('',(2.241,-0.114617254611,1.618956326409)); +#28293 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.623635237032)); +#28294 = ORIENTED_EDGE('',*,*,#28295,.T.); +#28295 = EDGE_CURVE('',#28287,#20130,#28296,.T.); +#28296 = LINE('',#28297,#28298); +#28297 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.623635237032)); +#28298 = VECTOR('',#28299,1.); +#28299 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28300 = ORIENTED_EDGE('',*,*,#20127,.F.); +#28301 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28302,#28303) + ,(#28304,#28305) + ,(#28306,#28307) + ,(#28308,#28309 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28302 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28303 = CARTESIAN_POINT('',(2.24,-0.100164619574,1.616616871097)); +#28304 = CARTESIAN_POINT('',(2.241,-0.107650876572,1.616616871097)); +#28305 = CARTESIAN_POINT('',(2.24,-0.107650876572,1.616616871097)); +#28306 = CARTESIAN_POINT('',(2.241,-0.114617254611,1.618956326409)); +#28307 = CARTESIAN_POINT('',(2.24,-0.114617254611,1.618956326409)); +#28308 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.623635237032)); +#28309 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.623635237032)); +#28310 = ADVANCED_FACE('',(#28311),#28329,.F.); +#28311 = FACE_BOUND('',#28312,.T.); +#28312 = EDGE_LOOP('',(#28313,#28314,#28322,#28328)); +#28313 = ORIENTED_EDGE('',*,*,#20308,.T.); +#28314 = ORIENTED_EDGE('',*,*,#28315,.F.); +#28315 = EDGE_CURVE('',#28316,#20300,#28318,.T.); +#28316 = VERTEX_POINT('',#28317); +#28317 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28318 = LINE('',#28319,#28320); +#28319 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28320 = VECTOR('',#28321,1.); +#28321 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28322 = ORIENTED_EDGE('',*,*,#28323,.F.); +#28323 = EDGE_CURVE('',#28287,#28316,#28324,.T.); +#28324 = LINE('',#28325,#28326); +#28325 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28326 = VECTOR('',#28327,1.); +#28327 = DIRECTION('',(-0.,-0.,-1.)); +#28328 = ORIENTED_EDGE('',*,*,#28295,.T.); +#28329 = PLANE('',#28330); +#28330 = AXIS2_PLACEMENT_3D('',#28331,#28332,#28333); +#28331 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28332 = DIRECTION('',(-0.,1.,0.)); +#28333 = DIRECTION('',(0.,0.,1.)); +#28334 = ADVANCED_FACE('',(#28335),#28354,.F.); +#28335 = FACE_BOUND('',#28336,.F.); +#28336 = EDGE_LOOP('',(#28337,#28338,#28347,#28353)); +#28337 = ORIENTED_EDGE('',*,*,#28315,.F.); +#28338 = ORIENTED_EDGE('',*,*,#28339,.T.); +#28339 = EDGE_CURVE('',#28316,#28340,#28342,.T.); +#28340 = VERTEX_POINT('',#28341); +#28341 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28342 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28343,#28344,#28345,#28346), + .UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.),.PIECEWISE_BEZIER_KNOTS.); +#28343 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28344 = CARTESIAN_POINT('',(2.241,-0.11550104884,1.607674953016)); +#28345 = CARTESIAN_POINT('',(2.241,-0.108950573967,1.606219291934)); +#28346 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28347 = ORIENTED_EDGE('',*,*,#28348,.T.); +#28348 = EDGE_CURVE('',#28340,#20291,#28349,.T.); +#28349 = LINE('',#28350,#28351); +#28350 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28351 = VECTOR('',#28352,1.); +#28352 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28353 = ORIENTED_EDGE('',*,*,#20299,.F.); +#28354 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28355,#28356) + ,(#28357,#28358) + ,(#28359,#28360) + ,(#28361,#28362 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28355 = CARTESIAN_POINT('',(2.241,-0.121115741588,1.610482299391)); +#28356 = CARTESIAN_POINT('',(2.24,-0.121115741588,1.610482299391)); +#28357 = CARTESIAN_POINT('',(2.241,-0.11550104884,1.607674953016)); +#28358 = CARTESIAN_POINT('',(2.24,-0.11550104884,1.607674953016)); +#28359 = CARTESIAN_POINT('',(2.241,-0.108950573967,1.606219291934)); +#28360 = CARTESIAN_POINT('',(2.24,-0.108950573967,1.606219291934)); +#28361 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28362 = CARTESIAN_POINT('',(2.24,-0.101412329074,1.606219291934)); +#28363 = ADVANCED_FACE('',(#28364),#28383,.F.); +#28364 = FACE_BOUND('',#28365,.F.); +#28365 = EDGE_LOOP('',(#28366,#28367,#28376,#28382)); +#28366 = ORIENTED_EDGE('',*,*,#28348,.F.); +#28367 = ORIENTED_EDGE('',*,*,#28368,.T.); +#28368 = EDGE_CURVE('',#28340,#28369,#28371,.T.); +#28369 = VERTEX_POINT('',#28370); +#28370 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28371 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28372,#28373,#28374,#28375), + .UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.),.PIECEWISE_BEZIER_KNOTS.); +#28372 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28373 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.606219291934)); +#28374 = CARTESIAN_POINT('',(2.241,-8.56859905896E-02,1.608142844079)); +#28375 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28376 = ORIENTED_EDGE('',*,*,#28377,.T.); +#28377 = EDGE_CURVE('',#28369,#20282,#28378,.T.); +#28378 = LINE('',#28379,#28380); +#28379 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28380 = VECTOR('',#28381,1.); +#28381 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28382 = ORIENTED_EDGE('',*,*,#20290,.F.); +#28383 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28384,#28385) + ,(#28386,#28387) + ,(#28388,#28389) + ,(#28390,#28391 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28384 = CARTESIAN_POINT('',(2.241,-0.101412329074,1.606219291934)); +#28385 = CARTESIAN_POINT('',(2.24,-0.101412329074,1.606219291934)); +#28386 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.606219291934)); +#28387 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.606219291934)); +#28388 = CARTESIAN_POINT('',(2.241,-8.56859905896E-02,1.608142844079)); +#28389 = CARTESIAN_POINT('',(2.24,-8.56859905896E-02,1.608142844079)); +#28390 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28391 = CARTESIAN_POINT('',(2.24,-8.02532554768E-02,1.611989948369)); +#28392 = ADVANCED_FACE('',(#28393),#28412,.F.); +#28393 = FACE_BOUND('',#28394,.F.); +#28394 = EDGE_LOOP('',(#28395,#28396,#28405,#28411)); +#28395 = ORIENTED_EDGE('',*,*,#28377,.F.); +#28396 = ORIENTED_EDGE('',*,*,#28397,.T.); +#28397 = EDGE_CURVE('',#28369,#28398,#28400,.T.); +#28398 = VERTEX_POINT('',#28399); +#28399 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28400 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28401,#28402,#28403,#28404), + .UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.),.PIECEWISE_BEZIER_KNOTS.); +#28401 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28402 = CARTESIAN_POINT('',(2.241,-7.479452641612E-02,1.615785064764)); +#28403 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.621035842241)); +#28404 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28405 = ORIENTED_EDGE('',*,*,#28406,.T.); +#28406 = EDGE_CURVE('',#28398,#20273,#28407,.T.); +#28407 = LINE('',#28408,#28409); +#28408 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28409 = VECTOR('',#28410,1.); +#28410 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28411 = ORIENTED_EDGE('',*,*,#20281,.F.); +#28412 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28413,#28414) + ,(#28415,#28416) + ,(#28417,#28418) + ,(#28419,#28420 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28413 = CARTESIAN_POINT('',(2.241,-8.02532554768E-02,1.611989948369)); +#28414 = CARTESIAN_POINT('',(2.24,-8.02532554768E-02,1.611989948369)); +#28415 = CARTESIAN_POINT('',(2.241,-7.479452641612E-02,1.615785064764)); +#28416 = CARTESIAN_POINT('',(2.24,-7.479452641612E-02,1.615785064764)); +#28417 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.621035842241)); +#28418 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.621035842241)); +#28419 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28420 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.627690292906)); +#28421 = ADVANCED_FACE('',(#28422),#28441,.F.); +#28422 = FACE_BOUND('',#28423,.F.); +#28423 = EDGE_LOOP('',(#28424,#28425,#28434,#28440)); +#28424 = ORIENTED_EDGE('',*,*,#28406,.F.); +#28425 = ORIENTED_EDGE('',*,*,#28426,.T.); +#28426 = EDGE_CURVE('',#28398,#28427,#28429,.T.); +#28427 = VERTEX_POINT('',#28428); +#28428 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28429 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28430,#28431,#28432,#28433), + .UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.),.PIECEWISE_BEZIER_KNOTS.); +#28430 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28431 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.632473179321)); +#28432 = CARTESIAN_POINT('',(2.241,-7.349482902082E-02,1.636476247299)); +#28433 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28434 = ORIENTED_EDGE('',*,*,#28435,.T.); +#28435 = EDGE_CURVE('',#28427,#20264,#28436,.T.); +#28436 = LINE('',#28437,#28438); +#28437 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28438 = VECTOR('',#28439,1.); +#28439 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28440 = ORIENTED_EDGE('',*,*,#20272,.F.); +#28441 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28442,#28443) + ,(#28444,#28445) + ,(#28446,#28447) + ,(#28448,#28449 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28442 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.627690292906)); +#28443 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.627690292906)); +#28444 = CARTESIAN_POINT('',(2.241,-7.206516188578E-02,1.632473179321)); +#28445 = CARTESIAN_POINT('',(2.24,-7.206516188578E-02,1.632473179321)); +#28446 = CARTESIAN_POINT('',(2.241,-7.349482902082E-02,1.636476247299)); +#28447 = CARTESIAN_POINT('',(2.24,-7.349482902082E-02,1.636476247299)); +#28448 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28449 = CARTESIAN_POINT('',(2.24,-7.632816934267E-02,1.639699496839)); +#28450 = ADVANCED_FACE('',(#28451),#28470,.F.); +#28451 = FACE_BOUND('',#28452,.F.); +#28452 = EDGE_LOOP('',(#28453,#28454,#28463,#28469)); +#28453 = ORIENTED_EDGE('',*,*,#28435,.F.); +#28454 = ORIENTED_EDGE('',*,*,#28455,.T.); +#28455 = EDGE_CURVE('',#28427,#28456,#28458,.T.); +#28456 = VERTEX_POINT('',#28457); +#28457 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28458 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28459,#28460,#28461,#28462), + .UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.),.PIECEWISE_BEZIER_KNOTS.); +#28459 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28460 = CARTESIAN_POINT('',(2.241,-7.91875036124E-02,1.64292274638)); +#28461 = CARTESIAN_POINT('',(2.241,-8.464623267308E-02,1.646094008024)); +#28462 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28463 = ORIENTED_EDGE('',*,*,#28464,.T.); +#28464 = EDGE_CURVE('',#28456,#20255,#28465,.T.); +#28465 = LINE('',#28466,#28467); +#28466 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28467 = VECTOR('',#28468,1.); +#28468 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28469 = ORIENTED_EDGE('',*,*,#20263,.F.); +#28470 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28471,#28472) + ,(#28473,#28474) + ,(#28475,#28476) + ,(#28477,#28478 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28471 = CARTESIAN_POINT('',(2.241,-7.632816934267E-02,1.639699496839)); +#28472 = CARTESIAN_POINT('',(2.24,-7.632816934267E-02,1.639699496839)); +#28473 = CARTESIAN_POINT('',(2.241,-7.91875036124E-02,1.64292274638)); +#28474 = CARTESIAN_POINT('',(2.24,-7.91875036124E-02,1.64292274638)); +#28475 = CARTESIAN_POINT('',(2.241,-8.464623267308E-02,1.646094008024)); +#28476 = CARTESIAN_POINT('',(2.24,-8.464623267308E-02,1.646094008024)); +#28477 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28478 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.649109305982)); +#28479 = ADVANCED_FACE('',(#28480),#28499,.F.); +#28480 = FACE_BOUND('',#28481,.F.); +#28481 = EDGE_LOOP('',(#28482,#28483,#28492,#28498)); +#28482 = ORIENTED_EDGE('',*,*,#28464,.F.); +#28483 = ORIENTED_EDGE('',*,*,#28484,.T.); +#28484 = EDGE_CURVE('',#28456,#28485,#28487,.T.); +#28485 = VERTEX_POINT('',#28486); +#28486 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28487 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28488,#28489,#28490,#28491), + .UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.),.PIECEWISE_BEZIER_KNOTS.); +#28488 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28489 = CARTESIAN_POINT('',(2.241,-9.915085560581E-02,1.651604724981)); +#28490 = CARTESIAN_POINT('',(2.241,-0.103257899375,1.653684240814)); +#28491 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28492 = ORIENTED_EDGE('',*,*,#28493,.T.); +#28493 = EDGE_CURVE('',#28485,#20246,#28494,.T.); +#28494 = LINE('',#28495,#28496); +#28495 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28496 = VECTOR('',#28497,1.); +#28497 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28498 = ORIENTED_EDGE('',*,*,#20254,.F.); +#28499 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28500,#28501) + ,(#28502,#28503) + ,(#28504,#28505) + ,(#28506,#28507 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(14.,15.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28500 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.649109305982)); +#28501 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.649109305982)); +#28502 = CARTESIAN_POINT('',(2.241,-9.915085560581E-02,1.651604724981)); +#28503 = CARTESIAN_POINT('',(2.24,-9.915085560581E-02,1.651604724981)); +#28504 = CARTESIAN_POINT('',(2.241,-0.103257899375,1.653684240814)); +#28505 = CARTESIAN_POINT('',(2.24,-0.103257899375,1.653684240814)); +#28506 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28507 = CARTESIAN_POINT('',(2.24,-0.105129463625,1.65534785348)); +#28508 = ADVANCED_FACE('',(#28509),#28528,.F.); +#28509 = FACE_BOUND('',#28510,.F.); +#28510 = EDGE_LOOP('',(#28511,#28512,#28521,#28527)); +#28511 = ORIENTED_EDGE('',*,*,#28493,.F.); +#28512 = ORIENTED_EDGE('',*,*,#28513,.T.); +#28513 = EDGE_CURVE('',#28485,#28514,#28516,.T.); +#28514 = VERTEX_POINT('',#28515); +#28515 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28516 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28517,#28518,#28519,#28520), + .UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.),.PIECEWISE_BEZIER_KNOTS.); +#28517 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28518 = CARTESIAN_POINT('',(2.241,-0.106975033926,1.65695947825)); +#28519 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.65919495777)); +#28520 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28521 = ORIENTED_EDGE('',*,*,#28522,.T.); +#28522 = EDGE_CURVE('',#28514,#20237,#28523,.T.); +#28523 = LINE('',#28524,#28525); +#28524 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28525 = VECTOR('',#28526,1.); +#28526 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28527 = ORIENTED_EDGE('',*,*,#20245,.F.); +#28528 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28529,#28530) + ,(#28531,#28532) + ,(#28533,#28534) + ,(#28535,#28536 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(13.,14.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28529 = CARTESIAN_POINT('',(2.241,-0.105129463625,1.65534785348)); +#28530 = CARTESIAN_POINT('',(2.24,-0.105129463625,1.65534785348)); +#28531 = CARTESIAN_POINT('',(2.241,-0.106975033926,1.65695947825)); +#28532 = CARTESIAN_POINT('',(2.24,-0.106975033926,1.65695947825)); +#28533 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.65919495777)); +#28534 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.65919495777)); +#28535 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28536 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.662106279936)); +#28537 = ADVANCED_FACE('',(#28538),#28557,.F.); +#28538 = FACE_BOUND('',#28539,.F.); +#28539 = EDGE_LOOP('',(#28540,#28541,#28550,#28556)); +#28540 = ORIENTED_EDGE('',*,*,#28522,.F.); +#28541 = ORIENTED_EDGE('',*,*,#28542,.T.); +#28542 = EDGE_CURVE('',#28514,#28543,#28545,.T.); +#28543 = VERTEX_POINT('',#28544); +#28544 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28545 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28546,#28547,#28548,#28549), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#28546 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28547 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.665017602101)); +#28548 = CARTESIAN_POINT('',(2.241,-0.106611118655,1.667409045309)); +#28549 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28550 = ORIENTED_EDGE('',*,*,#28551,.T.); +#28551 = EDGE_CURVE('',#28543,#20228,#28552,.T.); +#28552 = LINE('',#28553,#28554); +#28553 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28554 = VECTOR('',#28555,1.); +#28555 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28556 = ORIENTED_EDGE('',*,*,#20236,.F.); +#28557 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28558,#28559) + ,(#28560,#28561) + ,(#28562,#28563) + ,(#28564,#28565 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28558 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.662106279936)); +#28559 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.662106279936)); +#28560 = CARTESIAN_POINT('',(2.241,-0.107910816051,1.665017602101)); +#28561 = CARTESIAN_POINT('',(2.24,-0.107910816051,1.665017602101)); +#28562 = CARTESIAN_POINT('',(2.241,-0.106611118655,1.667409045309)); +#28563 = CARTESIAN_POINT('',(2.24,-0.106611118655,1.667409045309)); +#28564 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28565 = CARTESIAN_POINT('',(2.24,-0.104037717812,1.669176633766)); +#28566 = ADVANCED_FACE('',(#28567),#28586,.F.); +#28567 = FACE_BOUND('',#28568,.F.); +#28568 = EDGE_LOOP('',(#28569,#28570,#28579,#28585)); +#28569 = ORIENTED_EDGE('',*,*,#28551,.F.); +#28570 = ORIENTED_EDGE('',*,*,#28571,.T.); +#28571 = EDGE_CURVE('',#28543,#28572,#28574,.T.); +#28572 = VERTEX_POINT('',#28573); +#28573 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28574 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28575,#28576,#28577,#28578), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#28575 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28576 = CARTESIAN_POINT('',(2.241,-0.10146431697,1.67099621012)); +#28577 = CARTESIAN_POINT('',(2.241,-9.811109768929E-02,1.671880004349)); +#28578 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28579 = ORIENTED_EDGE('',*,*,#28580,.T.); +#28580 = EDGE_CURVE('',#28572,#20219,#28581,.T.); +#28581 = LINE('',#28582,#28583); +#28582 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28583 = VECTOR('',#28584,1.); +#28584 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28585 = ORIENTED_EDGE('',*,*,#20227,.F.); +#28586 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28587,#28588) + ,(#28589,#28590) + ,(#28591,#28592) + ,(#28593,#28594 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28587 = CARTESIAN_POINT('',(2.241,-0.104037717812,1.669176633766)); +#28588 = CARTESIAN_POINT('',(2.24,-0.104037717812,1.669176633766)); +#28589 = CARTESIAN_POINT('',(2.241,-0.10146431697,1.67099621012)); +#28590 = CARTESIAN_POINT('',(2.24,-0.10146431697,1.67099621012)); +#28591 = CARTESIAN_POINT('',(2.241,-9.811109768929E-02,1.671880004349)); +#28592 = CARTESIAN_POINT('',(2.24,-9.811109768929E-02,1.671880004349)); +#28593 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28594 = CARTESIAN_POINT('',(2.24,-9.400405392002E-02,1.671880004349)); +#28595 = ADVANCED_FACE('',(#28596),#28615,.F.); +#28596 = FACE_BOUND('',#28597,.F.); +#28597 = EDGE_LOOP('',(#28598,#28599,#28608,#28614)); +#28598 = ORIENTED_EDGE('',*,*,#28580,.F.); +#28599 = ORIENTED_EDGE('',*,*,#28600,.T.); +#28600 = EDGE_CURVE('',#28572,#28601,#28603,.T.); +#28601 = VERTEX_POINT('',#28602); +#28602 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.666629226872)); +#28603 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28604,#28605,#28606,#28607), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#28604 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28605 = CARTESIAN_POINT('',(2.241,-8.71156577243E-02,1.671880004349)); +#28606 = CARTESIAN_POINT('',(2.241,-8.098108601809E-02,1.670112415891)); +#28607 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.666629226872)); +#28608 = ORIENTED_EDGE('',*,*,#28609,.T.); +#28609 = EDGE_CURVE('',#28601,#20211,#28610,.T.); +#28610 = LINE('',#28611,#28612); +#28611 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.666629226872)); +#28612 = VECTOR('',#28613,1.); +#28613 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28614 = ORIENTED_EDGE('',*,*,#20218,.F.); +#28615 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28616,#28617) + ,(#28618,#28619) + ,(#28620,#28621) + ,(#28622,#28623 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28616 = CARTESIAN_POINT('',(2.241,-9.400405392002E-02,1.671880004349)); +#28617 = CARTESIAN_POINT('',(2.24,-9.400405392002E-02,1.671880004349)); +#28618 = CARTESIAN_POINT('',(2.241,-8.71156577243E-02,1.671880004349)); +#28619 = CARTESIAN_POINT('',(2.24,-8.71156577243E-02,1.671880004349)); +#28620 = CARTESIAN_POINT('',(2.241,-8.098108601809E-02,1.670112415891)); +#28621 = CARTESIAN_POINT('',(2.24,-8.098108601809E-02,1.670112415891)); +#28622 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.666629226872)); +#28623 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.666629226872)); +#28624 = ADVANCED_FACE('',(#28625),#28643,.F.); +#28625 = FACE_BOUND('',#28626,.T.); +#28626 = EDGE_LOOP('',(#28627,#28628,#28636,#28642)); +#28627 = ORIENTED_EDGE('',*,*,#20210,.T.); +#28628 = ORIENTED_EDGE('',*,*,#28629,.F.); +#28629 = EDGE_CURVE('',#28630,#20202,#28632,.T.); +#28630 = VERTEX_POINT('',#28631); +#28631 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28632 = LINE('',#28633,#28634); +#28633 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28634 = VECTOR('',#28635,1.); +#28635 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28636 = ORIENTED_EDGE('',*,*,#28637,.F.); +#28637 = EDGE_CURVE('',#28601,#28630,#28638,.T.); +#28638 = LINE('',#28639,#28640); +#28639 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28640 = VECTOR('',#28641,1.); +#28641 = DIRECTION('',(-0.,-0.,1.)); +#28642 = ORIENTED_EDGE('',*,*,#28609,.T.); +#28643 = PLANE('',#28644); +#28644 = AXIS2_PLACEMENT_3D('',#28645,#28646,#28647); +#28645 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28646 = DIRECTION('',(0.,-1.,0.)); +#28647 = DIRECTION('',(0.,-0.,-1.)); +#28648 = ADVANCED_FACE('',(#28649),#28668,.F.); +#28649 = FACE_BOUND('',#28650,.F.); +#28650 = EDGE_LOOP('',(#28651,#28652,#28661,#28667)); +#28651 = ORIENTED_EDGE('',*,*,#28629,.F.); +#28652 = ORIENTED_EDGE('',*,*,#28653,.T.); +#28653 = EDGE_CURVE('',#28630,#28654,#28656,.T.); +#28654 = VERTEX_POINT('',#28655); +#28655 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28656 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28657,#28658,#28659,#28660), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#28657 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28658 = CARTESIAN_POINT('',(2.241,-8.085111627869E-02,1.6811858377)); +#28659 = CARTESIAN_POINT('',(2.241,-8.656978481851E-02,1.682225595617)); +#28660 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28661 = ORIENTED_EDGE('',*,*,#28662,.T.); +#28662 = EDGE_CURVE('',#28654,#20193,#28663,.T.); +#28663 = LINE('',#28664,#28665); +#28664 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28665 = VECTOR('',#28666,1.); +#28666 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28667 = ORIENTED_EDGE('',*,*,#20201,.F.); +#28668 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28669,#28670) + ,(#28671,#28672) + ,(#28673,#28674) + ,(#28675,#28676 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28669 = CARTESIAN_POINT('',(2.241,-7.554835090528E-02,1.679002346076)); +#28670 = CARTESIAN_POINT('',(2.24,-7.554835090528E-02,1.679002346076)); +#28671 = CARTESIAN_POINT('',(2.241,-8.085111627869E-02,1.6811858377)); +#28672 = CARTESIAN_POINT('',(2.24,-8.085111627869E-02,1.6811858377)); +#28673 = CARTESIAN_POINT('',(2.241,-8.656978481851E-02,1.682225595617)); +#28674 = CARTESIAN_POINT('',(2.24,-8.656978481851E-02,1.682225595617)); +#28675 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28676 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.682225595617)); +#28677 = ADVANCED_FACE('',(#28678),#28697,.F.); +#28678 = FACE_BOUND('',#28679,.F.); +#28679 = EDGE_LOOP('',(#28680,#28681,#28690,#28696)); +#28680 = ORIENTED_EDGE('',*,*,#28662,.F.); +#28681 = ORIENTED_EDGE('',*,*,#28682,.T.); +#28682 = EDGE_CURVE('',#28654,#28683,#28685,.T.); +#28683 = VERTEX_POINT('',#28684); +#28684 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28685 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28686,#28687,#28688,#28689), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#28686 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28687 = CARTESIAN_POINT('',(2.241,-0.10071049248,1.682225595617)); +#28688 = CARTESIAN_POINT('',(2.241,-0.10741693104,1.680302043472)); +#28689 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28690 = ORIENTED_EDGE('',*,*,#28691,.T.); +#28691 = EDGE_CURVE('',#28683,#20184,#28692,.T.); +#28692 = LINE('',#28693,#28694); +#28693 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28694 = VECTOR('',#28695,1.); +#28695 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28696 = ORIENTED_EDGE('',*,*,#20192,.F.); +#28697 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28698,#28699) + ,(#28700,#28701) + ,(#28702,#28703) + ,(#28704,#28705 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28698 = CARTESIAN_POINT('',(2.241,-9.275634442047E-02,1.682225595617)); +#28699 = CARTESIAN_POINT('',(2.24,-9.275634442047E-02,1.682225595617)); +#28700 = CARTESIAN_POINT('',(2.241,-0.10071049248,1.682225595617)); +#28701 = CARTESIAN_POINT('',(2.24,-0.10071049248,1.682225595617)); +#28702 = CARTESIAN_POINT('',(2.241,-0.10741693104,1.680302043472)); +#28703 = CARTESIAN_POINT('',(2.24,-0.10741693104,1.680302043472)); +#28704 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28705 = CARTESIAN_POINT('',(2.24,-0.112875660101,1.676454939181)); +#28706 = ADVANCED_FACE('',(#28707),#28726,.F.); +#28707 = FACE_BOUND('',#28708,.F.); +#28708 = EDGE_LOOP('',(#28709,#28710,#28719,#28725)); +#28709 = ORIENTED_EDGE('',*,*,#28691,.F.); +#28710 = ORIENTED_EDGE('',*,*,#28711,.T.); +#28711 = EDGE_CURVE('',#28683,#28712,#28714,.T.); +#28712 = VERTEX_POINT('',#28713); +#28713 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28714 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28715,#28716,#28717,#28718), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#28715 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28716 = CARTESIAN_POINT('',(2.241,-0.118308395214,1.672555846995)); +#28717 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.667409045309)); +#28718 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28719 = ORIENTED_EDGE('',*,*,#28720,.T.); +#28720 = EDGE_CURVE('',#28712,#20175,#28721,.T.); +#28721 = LINE('',#28722,#28723); +#28722 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28723 = VECTOR('',#28724,1.); +#28724 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28725 = ORIENTED_EDGE('',*,*,#20183,.F.); +#28726 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28727,#28728) + ,(#28729,#28730) + ,(#28731,#28732) + ,(#28733,#28734 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28727 = CARTESIAN_POINT('',(2.241,-0.112875660101,1.676454939181)); +#28728 = CARTESIAN_POINT('',(2.24,-0.112875660101,1.676454939181)); +#28729 = CARTESIAN_POINT('',(2.241,-0.118308395214,1.672555846995)); +#28730 = CARTESIAN_POINT('',(2.24,-0.118308395214,1.672555846995)); +#28731 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.667409045309)); +#28732 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.667409045309)); +#28733 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28734 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.660962546228)); +#28735 = ADVANCED_FACE('',(#28736),#28755,.F.); +#28736 = FACE_BOUND('',#28737,.F.); +#28737 = EDGE_LOOP('',(#28738,#28739,#28748,#28754)); +#28738 = ORIENTED_EDGE('',*,*,#28720,.F.); +#28739 = ORIENTED_EDGE('',*,*,#28740,.T.); +#28740 = EDGE_CURVE('',#28712,#28741,#28743,.T.); +#28741 = VERTEX_POINT('',#28742); +#28742 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28743 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28744,#28745,#28746,#28747), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#28744 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28745 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.656491587187)); +#28746 = CARTESIAN_POINT('',(2.241,-0.119842038141,1.652644482897)); +#28747 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28748 = ORIENTED_EDGE('',*,*,#28749,.T.); +#28749 = EDGE_CURVE('',#28741,#20166,#28750,.T.); +#28750 = LINE('',#28751,#28752); +#28751 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28752 = VECTOR('',#28753,1.); +#28753 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28754 = ORIENTED_EDGE('',*,*,#20174,.F.); +#28755 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28756,#28757) + ,(#28758,#28759) + ,(#28760,#28761) + ,(#28762,#28763 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28756 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.660962546228)); +#28757 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.660962546228)); +#28758 = CARTESIAN_POINT('',(2.241,-0.121037759744,1.656491587187)); +#28759 = CARTESIAN_POINT('',(2.24,-0.121037759744,1.656491587187)); +#28760 = CARTESIAN_POINT('',(2.241,-0.119842038141,1.652644482897)); +#28761 = CARTESIAN_POINT('',(2.24,-0.119842038141,1.652644482897)); +#28762 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28763 = CARTESIAN_POINT('',(2.24,-0.117424600985,1.649473221253)); +#28764 = ADVANCED_FACE('',(#28765),#28784,.F.); +#28765 = FACE_BOUND('',#28766,.F.); +#28766 = EDGE_LOOP('',(#28767,#28768,#28777,#28783)); +#28767 = ORIENTED_EDGE('',*,*,#28749,.F.); +#28768 = ORIENTED_EDGE('',*,*,#28769,.T.); +#28769 = EDGE_CURVE('',#28741,#28770,#28772,.T.); +#28770 = VERTEX_POINT('',#28771); +#28771 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28772 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28773,#28774,#28775,#28776), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#28773 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28774 = CARTESIAN_POINT('',(2.241,-0.115033157777,1.646301959608)); +#28775 = CARTESIAN_POINT('',(2.241,-0.1097823803,1.643078710067)); +#28776 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28777 = ORIENTED_EDGE('',*,*,#28778,.T.); +#28778 = EDGE_CURVE('',#28770,#20157,#28779,.T.); +#28779 = LINE('',#28780,#28781); +#28780 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28781 = VECTOR('',#28782,1.); +#28782 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28783 = ORIENTED_EDGE('',*,*,#20165,.F.); +#28784 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28785,#28786) + ,(#28787,#28788) + ,(#28789,#28790) + ,(#28791,#28792 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28785 = CARTESIAN_POINT('',(2.241,-0.117424600985,1.649473221253)); +#28786 = CARTESIAN_POINT('',(2.24,-0.117424600985,1.649473221253)); +#28787 = CARTESIAN_POINT('',(2.241,-0.115033157777,1.646301959608)); +#28788 = CARTESIAN_POINT('',(2.24,-0.115033157777,1.646301959608)); +#28789 = CARTESIAN_POINT('',(2.241,-0.1097823803,1.643078710067)); +#28790 = CARTESIAN_POINT('',(2.24,-0.1097823803,1.643078710067)); +#28791 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28792 = CARTESIAN_POINT('',(2.24,-0.101750250396,1.639855460526)); +#28793 = ADVANCED_FACE('',(#28794),#28813,.F.); +#28794 = FACE_BOUND('',#28795,.F.); +#28795 = EDGE_LOOP('',(#28796,#28797,#28806,#28812)); +#28796 = ORIENTED_EDGE('',*,*,#28778,.F.); +#28797 = ORIENTED_EDGE('',*,*,#28798,.T.); +#28798 = EDGE_CURVE('',#28770,#28799,#28801,.T.); +#28799 = VERTEX_POINT('',#28800); +#28800 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28801 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28802,#28803,#28804,#28805), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#28802 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28803 = CARTESIAN_POINT('',(2.241,-9.504381183619E-02,1.637360041527)); +#28804 = CARTESIAN_POINT('',(2.241,-9.059884674415E-02,1.635176549903)); +#28805 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28806 = ORIENTED_EDGE('',*,*,#28807,.T.); +#28807 = EDGE_CURVE('',#28799,#20148,#28808,.T.); +#28808 = LINE('',#28809,#28810); +#28809 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28810 = VECTOR('',#28811,1.); +#28811 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28812 = ORIENTED_EDGE('',*,*,#20156,.F.); +#28813 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28814,#28815) + ,(#28816,#28817) + ,(#28818,#28819) + ,(#28820,#28821 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28814 = CARTESIAN_POINT('',(2.241,-0.101750250396,1.639855460526)); +#28815 = CARTESIAN_POINT('',(2.24,-0.101750250396,1.639855460526)); +#28816 = CARTESIAN_POINT('',(2.241,-9.504381183619E-02,1.637360041527)); +#28817 = CARTESIAN_POINT('',(2.24,-9.504381183619E-02,1.637360041527)); +#28818 = CARTESIAN_POINT('',(2.241,-9.059884674415E-02,1.635176549903)); +#28819 = CARTESIAN_POINT('',(2.24,-9.059884674415E-02,1.635176549903)); +#28820 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28821 = CARTESIAN_POINT('',(2.24,-8.841535511994E-02,1.633356973549)); +#28822 = ADVANCED_FACE('',(#28823),#28842,.F.); +#28823 = FACE_BOUND('',#28824,.F.); +#28824 = EDGE_LOOP('',(#28825,#28826,#28835,#28841)); +#28825 = ORIENTED_EDGE('',*,*,#28807,.F.); +#28826 = ORIENTED_EDGE('',*,*,#28827,.T.); +#28827 = EDGE_CURVE('',#28799,#28828,#28830,.T.); +#28828 = VERTEX_POINT('',#28829); +#28829 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28830 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28831,#28832,#28833,#28834), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#28831 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28832 = CARTESIAN_POINT('',(2.241,-8.623186349539E-02,1.631537397196)); +#28833 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.62924992978)); +#28834 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28835 = ORIENTED_EDGE('',*,*,#28836,.T.); +#28836 = EDGE_CURVE('',#28828,#20139,#28837,.T.); +#28837 = LINE('',#28838,#28839); +#28838 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28839 = VECTOR('',#28840,1.); +#28840 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28841 = ORIENTED_EDGE('',*,*,#20147,.F.); +#28842 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28843,#28844) + ,(#28845,#28846) + ,(#28847,#28848) + ,(#28849,#28850 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28843 = CARTESIAN_POINT('',(2.241,-8.841535511994E-02,1.633356973549)); +#28844 = CARTESIAN_POINT('',(2.24,-8.841535511994E-02,1.633356973549)); +#28845 = CARTESIAN_POINT('',(2.241,-8.623186349539E-02,1.631537397196)); +#28846 = CARTESIAN_POINT('',(2.24,-8.623186349539E-02,1.631537397196)); +#28847 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.62924992978)); +#28848 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.62924992978)); +#28849 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28850 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.626442583406)); +#28851 = ADVANCED_FACE('',(#28852),#28864,.F.); +#28852 = FACE_BOUND('',#28853,.F.); +#28853 = EDGE_LOOP('',(#28854,#28855,#28862,#28863)); +#28854 = ORIENTED_EDGE('',*,*,#28836,.F.); +#28855 = ORIENTED_EDGE('',*,*,#28856,.T.); +#28856 = EDGE_CURVE('',#28828,#28279,#28857,.T.); +#28857 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28858,#28859,#28860,#28861), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#28858 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28859 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.619892108533)); +#28860 = CARTESIAN_POINT('',(2.241,-9.015694962952E-02,1.616616871097)); +#28861 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28862 = ORIENTED_EDGE('',*,*,#28278,.T.); +#28863 = ORIENTED_EDGE('',*,*,#20138,.F.); +#28864 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28865,#28866) + ,(#28867,#28868) + ,(#28869,#28870) + ,(#28871,#28872 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28865 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.626442583406)); +#28866 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.626442583406)); +#28867 = CARTESIAN_POINT('',(2.241,-8.514011768347E-02,1.619892108533)); +#28868 = CARTESIAN_POINT('',(2.24,-8.514011768347E-02,1.619892108533)); +#28869 = CARTESIAN_POINT('',(2.241,-9.015694962952E-02,1.616616871097)); +#28870 = CARTESIAN_POINT('',(2.24,-9.015694962952E-02,1.616616871097)); +#28871 = CARTESIAN_POINT('',(2.241,-0.100164619574,1.616616871097)); +#28872 = CARTESIAN_POINT('',(2.24,-0.100164619574,1.616616871097)); +#28873 = ADVANCED_FACE('',(#28874),#28897,.F.); +#28874 = FACE_BOUND('',#28875,.T.); +#28875 = EDGE_LOOP('',(#28876,#28877,#28878,#28879,#28880,#28881,#28882, + #28883,#28884,#28885,#28886,#28887,#28888,#28889,#28890,#28891, + #28892,#28893,#28894,#28895,#28896)); +#28876 = ORIENTED_EDGE('',*,*,#28286,.T.); +#28877 = ORIENTED_EDGE('',*,*,#28323,.T.); +#28878 = ORIENTED_EDGE('',*,*,#28339,.T.); +#28879 = ORIENTED_EDGE('',*,*,#28368,.T.); +#28880 = ORIENTED_EDGE('',*,*,#28397,.T.); +#28881 = ORIENTED_EDGE('',*,*,#28426,.T.); +#28882 = ORIENTED_EDGE('',*,*,#28455,.T.); +#28883 = ORIENTED_EDGE('',*,*,#28484,.T.); +#28884 = ORIENTED_EDGE('',*,*,#28513,.T.); +#28885 = ORIENTED_EDGE('',*,*,#28542,.T.); +#28886 = ORIENTED_EDGE('',*,*,#28571,.T.); +#28887 = ORIENTED_EDGE('',*,*,#28600,.T.); +#28888 = ORIENTED_EDGE('',*,*,#28637,.T.); +#28889 = ORIENTED_EDGE('',*,*,#28653,.T.); +#28890 = ORIENTED_EDGE('',*,*,#28682,.T.); +#28891 = ORIENTED_EDGE('',*,*,#28711,.T.); +#28892 = ORIENTED_EDGE('',*,*,#28740,.T.); +#28893 = ORIENTED_EDGE('',*,*,#28769,.T.); +#28894 = ORIENTED_EDGE('',*,*,#28798,.T.); +#28895 = ORIENTED_EDGE('',*,*,#28827,.T.); +#28896 = ORIENTED_EDGE('',*,*,#28856,.T.); +#28897 = PLANE('',#28898); +#28898 = AXIS2_PLACEMENT_3D('',#28899,#28900,#28901); +#28899 = CARTESIAN_POINT('',(2.241,-0.111010594339,1.618371462581)); +#28900 = DIRECTION('',(-1.,0.,0.)); +#28901 = DIRECTION('',(0.,0.,1.)); +#28902 = ADVANCED_FACE('',(#28903),#28928,.F.); +#28903 = FACE_BOUND('',#28904,.T.); +#28904 = EDGE_LOOP('',(#28905,#28906,#28914,#28922)); +#28905 = ORIENTED_EDGE('',*,*,#19200,.T.); +#28906 = ORIENTED_EDGE('',*,*,#28907,.F.); +#28907 = EDGE_CURVE('',#28908,#19203,#28910,.T.); +#28908 = VERTEX_POINT('',#28909); +#28909 = CARTESIAN_POINT('',(2.241,-8.925862416954E-03,1.68056198295)); +#28910 = LINE('',#28911,#28912); +#28911 = CARTESIAN_POINT('',(2.241,-8.925862416954E-03,1.68056198295)); +#28912 = VECTOR('',#28913,1.); +#28913 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28914 = ORIENTED_EDGE('',*,*,#28915,.F.); +#28915 = EDGE_CURVE('',#28916,#28908,#28918,.T.); +#28916 = VERTEX_POINT('',#28917); +#28917 = CARTESIAN_POINT('',(2.241,4.279063119782E-03,1.68056198295)); +#28918 = LINE('',#28919,#28920); +#28919 = CARTESIAN_POINT('',(2.241,-8.925862416954E-03,1.68056198295)); +#28920 = VECTOR('',#28921,1.); +#28921 = DIRECTION('',(-0.,-1.,-1.642117813492E-14)); +#28922 = ORIENTED_EDGE('',*,*,#28923,.T.); +#28923 = EDGE_CURVE('',#28916,#19201,#28924,.T.); +#28924 = LINE('',#28925,#28926); +#28925 = CARTESIAN_POINT('',(2.241,4.279063119782E-03,1.68056198295)); +#28926 = VECTOR('',#28927,1.); +#28927 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28928 = PLANE('',#28929); +#28929 = AXIS2_PLACEMENT_3D('',#28930,#28931,#28932); +#28930 = CARTESIAN_POINT('',(2.241,-8.925862416954E-03,1.68056198295)); +#28931 = DIRECTION('',(-2.710505431214E-16,1.642117813492E-14,-1.)); +#28932 = DIRECTION('',(-3.097539305759E-47,1.,1.642117813492E-14)); +#28933 = ADVANCED_FACE('',(#28934),#28952,.F.); +#28934 = FACE_BOUND('',#28935,.T.); +#28935 = EDGE_LOOP('',(#28936,#28937,#28945,#28951)); +#28936 = ORIENTED_EDGE('',*,*,#19319,.T.); +#28937 = ORIENTED_EDGE('',*,*,#28938,.F.); +#28938 = EDGE_CURVE('',#28939,#19311,#28941,.T.); +#28939 = VERTEX_POINT('',#28940); +#28940 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28941 = LINE('',#28942,#28943); +#28942 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28943 = VECTOR('',#28944,1.); +#28944 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28945 = ORIENTED_EDGE('',*,*,#28946,.F.); +#28946 = EDGE_CURVE('',#28908,#28939,#28947,.T.); +#28947 = LINE('',#28948,#28949); +#28948 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28949 = VECTOR('',#28950,1.); +#28950 = DIRECTION('',(-0.,-0.340917796219,-0.9400931104)); +#28951 = ORIENTED_EDGE('',*,*,#28907,.T.); +#28952 = PLANE('',#28953); +#28953 = AXIS2_PLACEMENT_3D('',#28954,#28955,#28956); +#28954 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28955 = DIRECTION('',(-9.240595382483E-17,0.9400931104,-0.340917796219) + ); +#28956 = DIRECTION('',(-9.614584106463E-33,0.340917796219,0.9400931104) + ); +#28957 = ADVANCED_FACE('',(#28958),#28977,.F.); +#28958 = FACE_BOUND('',#28959,.F.); +#28959 = EDGE_LOOP('',(#28960,#28961,#28970,#28976)); +#28960 = ORIENTED_EDGE('',*,*,#28938,.F.); +#28961 = ORIENTED_EDGE('',*,*,#28962,.T.); +#28962 = EDGE_CURVE('',#28939,#28963,#28965,.T.); +#28963 = VERTEX_POINT('',#28964); +#28964 = CARTESIAN_POINT('',(2.241,-3.031888154575E-02,1.619996084325)); +#28965 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#28966,#28967,#28968,#28969), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#28966 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28967 = CARTESIAN_POINT('',(2.241,-2.953906310801E-02,1.623323309657)); +#28968 = CARTESIAN_POINT('',(2.241,-3.005894206696E-02,1.621347769616)); +#28969 = CARTESIAN_POINT('',(2.241,-3.031888154575E-02,1.619996084325)); +#28970 = ORIENTED_EDGE('',*,*,#28971,.T.); +#28971 = EDGE_CURVE('',#28963,#19303,#28972,.T.); +#28972 = LINE('',#28973,#28974); +#28973 = CARTESIAN_POINT('',(2.241,-3.031888154575E-02,1.619996084325)); +#28974 = VECTOR('',#28975,1.); +#28975 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28976 = ORIENTED_EDGE('',*,*,#19310,.F.); +#28977 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#28978,#28979) + ,(#28980,#28981) + ,(#28982,#28983) + ,(#28984,#28985 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#28978 = CARTESIAN_POINT('',(2.241,-2.875924467097E-02,1.625870716552)); +#28979 = CARTESIAN_POINT('',(2.24,-2.875924467097E-02,1.625870716552)); +#28980 = CARTESIAN_POINT('',(2.241,-2.953906310801E-02,1.623323309657)); +#28981 = CARTESIAN_POINT('',(2.24,-2.953906310801E-02,1.623323309657)); +#28982 = CARTESIAN_POINT('',(2.241,-3.005894206696E-02,1.621347769616)); +#28983 = CARTESIAN_POINT('',(2.24,-3.005894206696E-02,1.621347769616)); +#28984 = CARTESIAN_POINT('',(2.241,-3.031888154575E-02,1.619996084325)); +#28985 = CARTESIAN_POINT('',(2.24,-3.031888154575E-02,1.619996084325)); +#28986 = ADVANCED_FACE('',(#28987),#29005,.F.); +#28987 = FACE_BOUND('',#28988,.T.); +#28988 = EDGE_LOOP('',(#28989,#28990,#28998,#29004)); +#28989 = ORIENTED_EDGE('',*,*,#19302,.T.); +#28990 = ORIENTED_EDGE('',*,*,#28991,.F.); +#28991 = EDGE_CURVE('',#28992,#19295,#28994,.T.); +#28992 = VERTEX_POINT('',#28993); +#28993 = CARTESIAN_POINT('',(2.241,-3.065680286816E-02,1.619996084325)); +#28994 = LINE('',#28995,#28996); +#28995 = CARTESIAN_POINT('',(2.241,-3.065680286816E-02,1.619996084325)); +#28996 = VECTOR('',#28997,1.); +#28997 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#28998 = ORIENTED_EDGE('',*,*,#28999,.F.); +#28999 = EDGE_CURVE('',#28963,#28992,#29000,.T.); +#29000 = LINE('',#29001,#29002); +#29001 = CARTESIAN_POINT('',(2.241,-3.065680286816E-02,1.619996084325)); +#29002 = VECTOR('',#29003,1.); +#29003 = DIRECTION('',(-0.,-1.,-0.)); +#29004 = ORIENTED_EDGE('',*,*,#28971,.T.); +#29005 = PLANE('',#29006); +#29006 = AXIS2_PLACEMENT_3D('',#29007,#29008,#29009); +#29007 = CARTESIAN_POINT('',(2.241,-3.065680286816E-02,1.619996084325)); +#29008 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#29009 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#29010 = ADVANCED_FACE('',(#29011),#29029,.F.); +#29011 = FACE_BOUND('',#29012,.T.); +#29012 = EDGE_LOOP('',(#29013,#29014,#29022,#29028)); +#29013 = ORIENTED_EDGE('',*,*,#19294,.T.); +#29014 = ORIENTED_EDGE('',*,*,#29015,.F.); +#29015 = EDGE_CURVE('',#29016,#19287,#29018,.T.); +#29016 = VERTEX_POINT('',#29017); +#29017 = CARTESIAN_POINT('',(2.241,-3.221643974294E-02,1.625974692344)); +#29018 = LINE('',#29019,#29020); +#29019 = CARTESIAN_POINT('',(2.241,-3.221643974294E-02,1.625974692344)); +#29020 = VECTOR('',#29021,1.); +#29021 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29022 = ORIENTED_EDGE('',*,*,#29023,.F.); +#29023 = EDGE_CURVE('',#28992,#29016,#29024,.T.); +#29024 = LINE('',#29025,#29026); +#29025 = CARTESIAN_POINT('',(2.241,-3.221643974294E-02,1.625974692344)); +#29026 = VECTOR('',#29027,1.); +#29027 = DIRECTION('',(-0.,-0.252421897188,0.967617272386)); +#29028 = ORIENTED_EDGE('',*,*,#28991,.T.); +#29029 = PLANE('',#29030); +#29030 = AXIS2_PLACEMENT_3D('',#29031,#29032,#29033); +#29031 = CARTESIAN_POINT('',(2.241,-3.221643974294E-02,1.625974692344)); +#29032 = DIRECTION('',(-6.84190923285E-17,-0.967617272386, + -0.252421897188)); +#29033 = DIRECTION('',(-4.649527368512E-33,0.252421897188, + -0.967617272386)); +#29034 = ADVANCED_FACE('',(#29035),#29053,.F.); +#29035 = FACE_BOUND('',#29036,.T.); +#29036 = EDGE_LOOP('',(#29037,#29038,#29046,#29052)); +#29037 = ORIENTED_EDGE('',*,*,#19286,.T.); +#29038 = ORIENTED_EDGE('',*,*,#29039,.F.); +#29039 = EDGE_CURVE('',#29040,#19279,#29042,.T.); +#29040 = VERTEX_POINT('',#29041); +#29041 = CARTESIAN_POINT('',(2.241,-5.119202171559E-02,1.68056198295)); +#29042 = LINE('',#29043,#29044); +#29043 = CARTESIAN_POINT('',(2.241,-5.119202171559E-02,1.68056198295)); +#29044 = VECTOR('',#29045,1.); +#29045 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29046 = ORIENTED_EDGE('',*,*,#29047,.F.); +#29047 = EDGE_CURVE('',#29016,#29040,#29048,.T.); +#29048 = LINE('',#29049,#29050); +#29049 = CARTESIAN_POINT('',(2.241,-5.119202171559E-02,1.68056198295)); +#29050 = VECTOR('',#29051,1.); +#29051 = DIRECTION('',(-0.,-0.328346164813,0.944557460429)); +#29052 = ORIENTED_EDGE('',*,*,#29015,.T.); +#29053 = PLANE('',#29054); +#29054 = AXIS2_PLACEMENT_3D('',#29055,#29056,#29057); +#29055 = CARTESIAN_POINT('',(2.241,-5.119202171559E-02,1.68056198295)); +#29056 = DIRECTION('',(-8.899840630425E-17,-0.944557460429, + -0.328346164813)); +#29057 = DIRECTION('',(1.058107918247E-32,0.328346164813,-0.944557460429 + )); +#29058 = ADVANCED_FACE('',(#29059),#29077,.F.); +#29059 = FACE_BOUND('',#29060,.T.); +#29060 = EDGE_LOOP('',(#29061,#29062,#29070,#29076)); +#29061 = ORIENTED_EDGE('',*,*,#19278,.T.); +#29062 = ORIENTED_EDGE('',*,*,#29063,.F.); +#29063 = EDGE_CURVE('',#29064,#19271,#29066,.T.); +#29064 = VERTEX_POINT('',#29065); +#29065 = CARTESIAN_POINT('',(2.241,-6.543670516919E-02,1.68056198295)); +#29066 = LINE('',#29067,#29068); +#29067 = CARTESIAN_POINT('',(2.241,-6.543670516919E-02,1.68056198295)); +#29068 = VECTOR('',#29069,1.); +#29069 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29070 = ORIENTED_EDGE('',*,*,#29071,.F.); +#29071 = EDGE_CURVE('',#29040,#29064,#29072,.T.); +#29072 = LINE('',#29073,#29074); +#29073 = CARTESIAN_POINT('',(2.241,-6.543670516919E-02,1.68056198295)); +#29074 = VECTOR('',#29075,1.); +#29075 = DIRECTION('',(-0.,-1.,-1.522255199306E-14)); +#29076 = ORIENTED_EDGE('',*,*,#29039,.T.); +#29077 = PLANE('',#29078); +#29078 = AXIS2_PLACEMENT_3D('',#29079,#29080,#29081); +#29079 = CARTESIAN_POINT('',(2.241,-6.543670516919E-02,1.68056198295)); +#29080 = DIRECTION('',(-2.710505431214E-16,1.522255199306E-14,-1.)); +#29081 = DIRECTION('',(-1.771468913371E-46,1.,1.522255199306E-14)); +#29082 = ADVANCED_FACE('',(#29083),#29101,.F.); +#29083 = FACE_BOUND('',#29084,.T.); +#29084 = EDGE_LOOP('',(#29085,#29086,#29094,#29100)); +#29085 = ORIENTED_EDGE('',*,*,#19270,.T.); +#29086 = ORIENTED_EDGE('',*,*,#29087,.F.); +#29087 = EDGE_CURVE('',#29088,#19263,#29090,.T.); +#29088 = VERTEX_POINT('',#29089); +#29089 = CARTESIAN_POINT('',(2.241,-3.694733826199E-02,1.608090856183)); +#29090 = LINE('',#29091,#29092); +#29091 = CARTESIAN_POINT('',(2.241,-3.694733826199E-02,1.608090856183)); +#29092 = VECTOR('',#29093,1.); +#29093 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29094 = ORIENTED_EDGE('',*,*,#29095,.F.); +#29095 = EDGE_CURVE('',#29064,#29088,#29096,.T.); +#29096 = LINE('',#29097,#29098); +#29097 = CARTESIAN_POINT('',(2.241,-3.694733826199E-02,1.608090856183)); +#29098 = VECTOR('',#29099,1.); +#29099 = DIRECTION('',(-0.,0.365858921669,-0.930670322636)); +#29100 = ORIENTED_EDGE('',*,*,#29063,.T.); +#29101 = PLANE('',#29102); +#29102 = AXIS2_PLACEMENT_3D('',#29103,#29104,#29105); +#29103 = CARTESIAN_POINT('',(2.241,-3.694733826199E-02,1.608090856183)); +#29104 = DIRECTION('',(9.916625942428E-17,0.930670322636,0.365858921669) + ); +#29105 = DIRECTION('',(-3.185703441361E-34,-0.365858921669, + 0.930670322636)); +#29106 = ADVANCED_FACE('',(#29107),#29125,.F.); +#29107 = FACE_BOUND('',#29108,.T.); +#29108 = EDGE_LOOP('',(#29109,#29110,#29118,#29124)); +#29109 = ORIENTED_EDGE('',*,*,#19262,.T.); +#29110 = ORIENTED_EDGE('',*,*,#29111,.F.); +#29111 = EDGE_CURVE('',#29112,#19254,#29114,.T.); +#29112 = VERTEX_POINT('',#29113); +#29113 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29114 = LINE('',#29115,#29116); +#29115 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29116 = VECTOR('',#29117,1.); +#29117 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29118 = ORIENTED_EDGE('',*,*,#29119,.F.); +#29119 = EDGE_CURVE('',#29088,#29112,#29120,.T.); +#29120 = LINE('',#29121,#29122); +#29121 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29122 = VECTOR('',#29123,1.); +#29123 = DIRECTION('',(-0.,-0.389758265065,-0.920917203017)); +#29124 = ORIENTED_EDGE('',*,*,#29087,.T.); +#29125 = PLANE('',#29126); +#29126 = AXIS2_PLACEMENT_3D('',#29127,#29128,#29129); +#29127 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29128 = DIRECTION('',(-1.05644189432E-16,0.920917203017,-0.389758265065 + )); +#29129 = DIRECTION('',(1.674476091446E-33,0.389758265065,0.920917203017) + ); +#29130 = ADVANCED_FACE('',(#29131),#29150,.F.); +#29131 = FACE_BOUND('',#29132,.F.); +#29132 = EDGE_LOOP('',(#29133,#29134,#29143,#29149)); +#29133 = ORIENTED_EDGE('',*,*,#29111,.F.); +#29134 = ORIENTED_EDGE('',*,*,#29135,.T.); +#29135 = EDGE_CURVE('',#29112,#29136,#29138,.T.); +#29136 = VERTEX_POINT('',#29137); +#29137 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29138 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29139,#29140,#29141,#29142), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#29139 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29140 = CARTESIAN_POINT('',(2.241,-4.542136528002E-02,1.588023528398)); +#29141 = CARTESIAN_POINT('',(2.241,-4.976235458055E-02,1.58464431517)); +#29142 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29143 = ORIENTED_EDGE('',*,*,#29144,.T.); +#29144 = EDGE_CURVE('',#29136,#19245,#29145,.T.); +#29145 = LINE('',#29146,#29147); +#29146 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29147 = VECTOR('',#29148,1.); +#29148 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29149 = ORIENTED_EDGE('',*,*,#19253,.F.); +#29150 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29151,#29152) + ,(#29153,#29154) + ,(#29155,#29156) + ,(#29157,#29158 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29151 = CARTESIAN_POINT('',(2.241,-4.253603706241E-02,1.594885930646)); +#29152 = CARTESIAN_POINT('',(2.24,-4.253603706241E-02,1.594885930646)); +#29153 = CARTESIAN_POINT('',(2.241,-4.542136528002E-02,1.588023528398)); +#29154 = CARTESIAN_POINT('',(2.24,-4.542136528002E-02,1.588023528398)); +#29155 = CARTESIAN_POINT('',(2.241,-4.976235458055E-02,1.58464431517)); +#29156 = CARTESIAN_POINT('',(2.24,-4.976235458055E-02,1.58464431517)); +#29157 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29158 = CARTESIAN_POINT('',(2.24,-5.558499891222E-02,1.58464431517)); +#29159 = ADVANCED_FACE('',(#29160),#29179,.F.); +#29160 = FACE_BOUND('',#29161,.F.); +#29161 = EDGE_LOOP('',(#29162,#29163,#29172,#29178)); +#29162 = ORIENTED_EDGE('',*,*,#29144,.F.); +#29163 = ORIENTED_EDGE('',*,*,#29164,.T.); +#29164 = EDGE_CURVE('',#29136,#29165,#29167,.T.); +#29165 = VERTEX_POINT('',#29166); +#29166 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.586099976253)); +#29167 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29168,#29169,#29170,#29171), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#29168 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29169 = CARTESIAN_POINT('',(2.241,-5.792445422369E-02,1.58464431517)); +#29170 = CARTESIAN_POINT('',(2.241,-6.031589743127E-02,1.585112206232)); +#29171 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.586099976253)); +#29172 = ORIENTED_EDGE('',*,*,#29173,.T.); +#29173 = EDGE_CURVE('',#29165,#19237,#29174,.T.); +#29174 = LINE('',#29175,#29176); +#29175 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.586099976253)); +#29176 = VECTOR('',#29177,1.); +#29177 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29178 = ORIENTED_EDGE('',*,*,#19244,.F.); +#29179 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29180,#29181) + ,(#29182,#29183) + ,(#29184,#29185) + ,(#29186,#29187 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29180 = CARTESIAN_POINT('',(2.241,-5.558499891222E-02,1.58464431517)); +#29181 = CARTESIAN_POINT('',(2.24,-5.558499891222E-02,1.58464431517)); +#29182 = CARTESIAN_POINT('',(2.241,-5.792445422369E-02,1.58464431517)); +#29183 = CARTESIAN_POINT('',(2.24,-5.792445422369E-02,1.58464431517)); +#29184 = CARTESIAN_POINT('',(2.241,-6.031589743127E-02,1.585112206232)); +#29185 = CARTESIAN_POINT('',(2.24,-6.031589743127E-02,1.585112206232)); +#29186 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.586099976253)); +#29187 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.586099976253)); +#29188 = ADVANCED_FACE('',(#29189),#29207,.F.); +#29189 = FACE_BOUND('',#29190,.T.); +#29190 = EDGE_LOOP('',(#29191,#29192,#29200,#29206)); +#29191 = ORIENTED_EDGE('',*,*,#19236,.T.); +#29192 = ORIENTED_EDGE('',*,*,#29193,.F.); +#29193 = EDGE_CURVE('',#29194,#19228,#29196,.T.); +#29194 = VERTEX_POINT('',#29195); +#29195 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29196 = LINE('',#29197,#29198); +#29197 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29198 = VECTOR('',#29199,1.); +#29199 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29200 = ORIENTED_EDGE('',*,*,#29201,.F.); +#29201 = EDGE_CURVE('',#29165,#29194,#29202,.T.); +#29202 = LINE('',#29203,#29204); +#29203 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29204 = VECTOR('',#29205,1.); +#29205 = DIRECTION('',(-0.,-0.,-1.)); +#29206 = ORIENTED_EDGE('',*,*,#29173,.T.); +#29207 = PLANE('',#29208); +#29208 = AXIS2_PLACEMENT_3D('',#29209,#29210,#29211); +#29209 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29210 = DIRECTION('',(-0.,1.,0.)); +#29211 = DIRECTION('',(0.,0.,1.)); +#29212 = ADVANCED_FACE('',(#29213),#29232,.F.); +#29213 = FACE_BOUND('',#29214,.F.); +#29214 = EDGE_LOOP('',(#29215,#29216,#29225,#29231)); +#29215 = ORIENTED_EDGE('',*,*,#29193,.F.); +#29216 = ORIENTED_EDGE('',*,*,#29217,.T.); +#29217 = EDGE_CURVE('',#29194,#29218,#29220,.T.); +#29218 = VERTEX_POINT('',#29219); +#29219 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29220 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29221,#29222,#29223,#29224), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#29221 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29222 = CARTESIAN_POINT('',(2.241,-6.054984296252E-02,1.57409077232)); +#29223 = CARTESIAN_POINT('',(2.241,-5.77944844843E-02,1.573726857049)); +#29224 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29225 = ORIENTED_EDGE('',*,*,#29226,.T.); +#29226 = EDGE_CURVE('',#29218,#19219,#29227,.T.); +#29227 = LINE('',#29228,#29229); +#29228 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29229 = VECTOR('',#29230,1.); +#29230 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29231 = ORIENTED_EDGE('',*,*,#19227,.F.); +#29232 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29233,#29234) + ,(#29235,#29236) + ,(#29237,#29238) + ,(#29239,#29240 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29233 = CARTESIAN_POINT('',(2.241,-6.281131643036E-02,1.574766614965)); +#29234 = CARTESIAN_POINT('',(2.24,-6.281131643036E-02,1.574766614965)); +#29235 = CARTESIAN_POINT('',(2.241,-6.054984296252E-02,1.57409077232)); +#29236 = CARTESIAN_POINT('',(2.24,-6.054984296252E-02,1.57409077232)); +#29237 = CARTESIAN_POINT('',(2.241,-5.77944844843E-02,1.573726857049)); +#29238 = CARTESIAN_POINT('',(2.24,-5.77944844843E-02,1.573726857049)); +#29239 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29240 = CARTESIAN_POINT('',(2.24,-5.459722889146E-02,1.573726857049)); +#29241 = ADVANCED_FACE('',(#29242),#29261,.F.); +#29242 = FACE_BOUND('',#29243,.F.); +#29243 = EDGE_LOOP('',(#29244,#29245,#29254,#29260)); +#29244 = ORIENTED_EDGE('',*,*,#29226,.F.); +#29245 = ORIENTED_EDGE('',*,*,#29246,.T.); +#29246 = EDGE_CURVE('',#29218,#29247,#29249,.T.); +#29247 = VERTEX_POINT('',#29248); +#29248 = CARTESIAN_POINT('',(2.241,-2.868126282734E-02,1.596965446479)); +#29249 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29250,#29251,#29252,#29253), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#29250 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29251 = CARTESIAN_POINT('',(2.241,-4.344582523919E-02,1.573726857049)); +#29252 = CARTESIAN_POINT('',(2.241,-3.481583453354E-02,1.581473053525)); +#29253 = CARTESIAN_POINT('',(2.241,-2.868126282734E-02,1.596965446479)); +#29254 = ORIENTED_EDGE('',*,*,#29255,.T.); +#29255 = EDGE_CURVE('',#29247,#19211,#29256,.T.); +#29256 = LINE('',#29257,#29258); +#29257 = CARTESIAN_POINT('',(2.241,-2.868126282734E-02,1.596965446479)); +#29258 = VECTOR('',#29259,1.); +#29259 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29260 = ORIENTED_EDGE('',*,*,#19218,.F.); +#29261 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29262,#29263) + ,(#29264,#29265) + ,(#29266,#29267) + ,(#29268,#29269 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29262 = CARTESIAN_POINT('',(2.241,-5.459722889146E-02,1.573726857049)); +#29263 = CARTESIAN_POINT('',(2.24,-5.459722889146E-02,1.573726857049)); +#29264 = CARTESIAN_POINT('',(2.241,-4.344582523919E-02,1.573726857049)); +#29265 = CARTESIAN_POINT('',(2.24,-4.344582523919E-02,1.573726857049)); +#29266 = CARTESIAN_POINT('',(2.241,-3.481583453354E-02,1.581473053525)); +#29267 = CARTESIAN_POINT('',(2.24,-3.481583453354E-02,1.581473053525)); +#29268 = CARTESIAN_POINT('',(2.241,-2.868126282734E-02,1.596965446479)); +#29269 = CARTESIAN_POINT('',(2.24,-2.868126282734E-02,1.596965446479)); +#29270 = ADVANCED_FACE('',(#29271),#29282,.F.); +#29271 = FACE_BOUND('',#29272,.T.); +#29272 = EDGE_LOOP('',(#29273,#29274,#29275,#29281)); +#29273 = ORIENTED_EDGE('',*,*,#19210,.T.); +#29274 = ORIENTED_EDGE('',*,*,#28923,.F.); +#29275 = ORIENTED_EDGE('',*,*,#29276,.F.); +#29276 = EDGE_CURVE('',#29247,#28916,#29277,.T.); +#29277 = LINE('',#29278,#29279); +#29278 = CARTESIAN_POINT('',(2.241,4.279063119782E-03,1.68056198295)); +#29279 = VECTOR('',#29280,1.); +#29280 = DIRECTION('',(-0.,0.366797678951,0.930300737781)); +#29281 = ORIENTED_EDGE('',*,*,#29255,.T.); +#29282 = PLANE('',#29283); +#29283 = AXIS2_PLACEMENT_3D('',#29284,#29285,#29286); +#29284 = CARTESIAN_POINT('',(2.241,4.279063119782E-03,1.68056198295)); +#29285 = DIRECTION('',(9.942071009531E-17,-0.930300737781,0.366797678951 + )); +#29286 = DIRECTION('',(1.371948700783E-33,-0.366797678951, + -0.930300737781)); +#29287 = ADVANCED_FACE('',(#29288),#29305,.T.); +#29288 = FACE_BOUND('',#29289,.T.); +#29289 = EDGE_LOOP('',(#29290,#29291,#29292,#29293,#29294,#29295,#29296, + #29297,#29298,#29299,#29300,#29301,#29302,#29303,#29304)); +#29290 = ORIENTED_EDGE('',*,*,#28915,.T.); +#29291 = ORIENTED_EDGE('',*,*,#28946,.T.); +#29292 = ORIENTED_EDGE('',*,*,#28962,.T.); +#29293 = ORIENTED_EDGE('',*,*,#28999,.T.); +#29294 = ORIENTED_EDGE('',*,*,#29023,.T.); +#29295 = ORIENTED_EDGE('',*,*,#29047,.T.); +#29296 = ORIENTED_EDGE('',*,*,#29071,.T.); +#29297 = ORIENTED_EDGE('',*,*,#29095,.T.); +#29298 = ORIENTED_EDGE('',*,*,#29119,.T.); +#29299 = ORIENTED_EDGE('',*,*,#29135,.T.); +#29300 = ORIENTED_EDGE('',*,*,#29164,.T.); +#29301 = ORIENTED_EDGE('',*,*,#29201,.T.); +#29302 = ORIENTED_EDGE('',*,*,#29217,.T.); +#29303 = ORIENTED_EDGE('',*,*,#29246,.T.); +#29304 = ORIENTED_EDGE('',*,*,#29276,.T.); +#29305 = PLANE('',#29306); +#29306 = AXIS2_PLACEMENT_3D('',#29307,#29308,#29309); +#29307 = CARTESIAN_POINT('',(2.241,-3.975793387962E-02,1.579536504406)); +#29308 = DIRECTION('',(1.,0.,0.)); +#29309 = DIRECTION('',(0.,0.,-1.)); +#29310 = ADVANCED_FACE('',(#29311),#29336,.F.); +#29311 = FACE_BOUND('',#29312,.T.); +#29312 = EDGE_LOOP('',(#29313,#29314,#29322,#29330)); +#29313 = ORIENTED_EDGE('',*,*,#20316,.T.); +#29314 = ORIENTED_EDGE('',*,*,#29315,.F.); +#29315 = EDGE_CURVE('',#29316,#20319,#29318,.T.); +#29316 = VERTEX_POINT('',#29317); +#29317 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.619528193263)); +#29318 = LINE('',#29319,#29320); +#29319 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.619528193263)); +#29320 = VECTOR('',#29321,1.); +#29321 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29322 = ORIENTED_EDGE('',*,*,#29323,.F.); +#29323 = EDGE_CURVE('',#29324,#29316,#29326,.T.); +#29324 = VERTEX_POINT('',#29325); +#29325 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.607934892496)); +#29326 = LINE('',#29327,#29328); +#29327 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.619528193263)); +#29328 = VECTOR('',#29329,1.); +#29329 = DIRECTION('',(-0.,-0.,1.)); +#29330 = ORIENTED_EDGE('',*,*,#29331,.T.); +#29331 = EDGE_CURVE('',#29324,#20317,#29332,.T.); +#29332 = LINE('',#29333,#29334); +#29333 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.607934892496)); +#29334 = VECTOR('',#29335,1.); +#29335 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29336 = PLANE('',#29337); +#29337 = AXIS2_PLACEMENT_3D('',#29338,#29339,#29340); +#29338 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.619528193263)); +#29339 = DIRECTION('',(0.,-1.,0.)); +#29340 = DIRECTION('',(0.,-0.,-1.)); +#29341 = ADVANCED_FACE('',(#29342),#29360,.F.); +#29342 = FACE_BOUND('',#29343,.T.); +#29343 = EDGE_LOOP('',(#29344,#29345,#29353,#29359)); +#29344 = ORIENTED_EDGE('',*,*,#20406,.T.); +#29345 = ORIENTED_EDGE('',*,*,#29346,.F.); +#29346 = EDGE_CURVE('',#29347,#20399,#29349,.T.); +#29347 = VERTEX_POINT('',#29348); +#29348 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.619528193263)); +#29349 = LINE('',#29350,#29351); +#29350 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.619528193263)); +#29351 = VECTOR('',#29352,1.); +#29352 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29353 = ORIENTED_EDGE('',*,*,#29354,.F.); +#29354 = EDGE_CURVE('',#29316,#29347,#29355,.T.); +#29355 = LINE('',#29356,#29357); +#29356 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.619528193263)); +#29357 = VECTOR('',#29358,1.); +#29358 = DIRECTION('',(-0.,-1.,-0.)); +#29359 = ORIENTED_EDGE('',*,*,#29315,.T.); +#29360 = PLANE('',#29361); +#29361 = AXIS2_PLACEMENT_3D('',#29362,#29363,#29364); +#29362 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.619528193263)); +#29363 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#29364 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#29365 = ADVANCED_FACE('',(#29366),#29384,.F.); +#29366 = FACE_BOUND('',#29367,.T.); +#29367 = EDGE_LOOP('',(#29368,#29369,#29377,#29383)); +#29368 = ORIENTED_EDGE('',*,*,#20398,.T.); +#29369 = ORIENTED_EDGE('',*,*,#29370,.F.); +#29370 = EDGE_CURVE('',#29371,#20391,#29373,.T.); +#29371 = VERTEX_POINT('',#29372); +#29372 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.653736228709)); +#29373 = LINE('',#29374,#29375); +#29374 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.653736228709)); +#29375 = VECTOR('',#29376,1.); +#29376 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29377 = ORIENTED_EDGE('',*,*,#29378,.F.); +#29378 = EDGE_CURVE('',#29347,#29371,#29379,.T.); +#29379 = LINE('',#29380,#29381); +#29380 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.653736228709)); +#29381 = VECTOR('',#29382,1.); +#29382 = DIRECTION('',(-0.,-3.169437117125E-15,1.)); +#29383 = ORIENTED_EDGE('',*,*,#29346,.T.); +#29384 = PLANE('',#29385); +#29385 = AXIS2_PLACEMENT_3D('',#29386,#29387,#29388); +#29386 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.653736228709)); +#29387 = DIRECTION('',(-8.590776519857E-31,-1.,-3.169437117125E-15)); +#29388 = DIRECTION('',(0.,3.169437117125E-15,-1.)); +#29389 = ADVANCED_FACE('',(#29390),#29408,.F.); +#29390 = FACE_BOUND('',#29391,.T.); +#29391 = EDGE_LOOP('',(#29392,#29393,#29401,#29407)); +#29392 = ORIENTED_EDGE('',*,*,#20390,.T.); +#29393 = ORIENTED_EDGE('',*,*,#29394,.F.); +#29394 = EDGE_CURVE('',#29395,#20383,#29397,.T.); +#29395 = VERTEX_POINT('',#29396); +#29396 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.653736228709)); +#29397 = LINE('',#29398,#29399); +#29398 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.653736228709)); +#29399 = VECTOR('',#29400,1.); +#29400 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29401 = ORIENTED_EDGE('',*,*,#29402,.F.); +#29402 = EDGE_CURVE('',#29371,#29395,#29403,.T.); +#29403 = LINE('',#29404,#29405); +#29404 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.653736228709)); +#29405 = VECTOR('',#29406,1.); +#29406 = DIRECTION('',(-0.,1.,5.962800923771E-15)); +#29407 = ORIENTED_EDGE('',*,*,#29370,.T.); +#29408 = PLANE('',#29409); +#29409 = AXIS2_PLACEMENT_3D('',#29410,#29411,#29412); +#29410 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.653736228709)); +#29411 = DIRECTION('',(2.710505431214E-16,-5.962800923771E-15,1.)); +#29412 = DIRECTION('',(-1.316008869187E-46,-1.,-5.962800923771E-15)); +#29413 = ADVANCED_FACE('',(#29414),#29432,.F.); +#29414 = FACE_BOUND('',#29415,.T.); +#29415 = EDGE_LOOP('',(#29416,#29417,#29425,#29431)); +#29416 = ORIENTED_EDGE('',*,*,#20382,.T.); +#29417 = ORIENTED_EDGE('',*,*,#29418,.F.); +#29418 = EDGE_CURVE('',#29419,#20375,#29421,.T.); +#29419 = VERTEX_POINT('',#29420); +#29420 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.665381517372)); +#29421 = LINE('',#29422,#29423); +#29422 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.665381517372)); +#29423 = VECTOR('',#29424,1.); +#29424 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29425 = ORIENTED_EDGE('',*,*,#29426,.F.); +#29426 = EDGE_CURVE('',#29395,#29419,#29427,.T.); +#29427 = LINE('',#29428,#29429); +#29428 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.665381517372)); +#29429 = VECTOR('',#29430,1.); +#29430 = DIRECTION('',(-0.,-9.310221531588E-15,1.)); +#29431 = ORIENTED_EDGE('',*,*,#29394,.T.); +#29432 = PLANE('',#29433); +#29433 = AXIS2_PLACEMENT_3D('',#29434,#29435,#29436); +#29434 = CARTESIAN_POINT('',(2.241,6.74963444319E-02,1.665381517372)); +#29435 = DIRECTION('',(-2.523540602717E-30,-1.,-9.310221531588E-15)); +#29436 = DIRECTION('',(0.,9.310221531588E-15,-1.)); +#29437 = ADVANCED_FACE('',(#29438),#29456,.F.); +#29438 = FACE_BOUND('',#29439,.T.); +#29439 = EDGE_LOOP('',(#29440,#29441,#29449,#29455)); +#29440 = ORIENTED_EDGE('',*,*,#20374,.T.); +#29441 = ORIENTED_EDGE('',*,*,#29442,.F.); +#29442 = EDGE_CURVE('',#29443,#20367,#29445,.T.); +#29443 = VERTEX_POINT('',#29444); +#29444 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.665381517372)); +#29445 = LINE('',#29446,#29447); +#29446 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.665381517372)); +#29447 = VECTOR('',#29448,1.); +#29448 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29449 = ORIENTED_EDGE('',*,*,#29450,.F.); +#29450 = EDGE_CURVE('',#29419,#29443,#29451,.T.); +#29451 = LINE('',#29452,#29453); +#29452 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.665381517372)); +#29453 = VECTOR('',#29454,1.); +#29454 = DIRECTION('',(-0.,-1.,-5.962800923771E-15)); +#29455 = ORIENTED_EDGE('',*,*,#29418,.T.); +#29456 = PLANE('',#29457); +#29457 = AXIS2_PLACEMENT_3D('',#29458,#29459,#29460); +#29458 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.665381517372)); +#29459 = DIRECTION('',(-2.710505431214E-16,5.962800923771E-15,-1.)); +#29460 = DIRECTION('',(1.316008869187E-46,1.,5.962800923771E-15)); +#29461 = ADVANCED_FACE('',(#29462),#29480,.F.); +#29462 = FACE_BOUND('',#29463,.T.); +#29463 = EDGE_LOOP('',(#29464,#29465,#29473,#29479)); +#29464 = ORIENTED_EDGE('',*,*,#20366,.T.); +#29465 = ORIENTED_EDGE('',*,*,#29466,.F.); +#29466 = EDGE_CURVE('',#29467,#20359,#29469,.T.); +#29467 = VERTEX_POINT('',#29468); +#29468 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.697925940153)); +#29469 = LINE('',#29470,#29471); +#29470 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.697925940153)); +#29471 = VECTOR('',#29472,1.); +#29472 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29473 = ORIENTED_EDGE('',*,*,#29474,.F.); +#29474 = EDGE_CURVE('',#29443,#29467,#29475,.T.); +#29475 = LINE('',#29476,#29477); +#29476 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.697925940153)); +#29477 = VECTOR('',#29478,1.); +#29478 = DIRECTION('',(-0.,-3.331453071942E-15,1.)); +#29479 = ORIENTED_EDGE('',*,*,#29442,.T.); +#29480 = PLANE('',#29481); +#29481 = AXIS2_PLACEMENT_3D('',#29482,#29483,#29484); +#29482 = CARTESIAN_POINT('',(2.241,3.113081130926E-02,1.697925940153)); +#29483 = DIRECTION('',(-9.029921645332E-31,-1.,-3.331453071942E-15)); +#29484 = DIRECTION('',(0.,3.331453071942E-15,-1.)); +#29485 = ADVANCED_FACE('',(#29486),#29504,.F.); +#29486 = FACE_BOUND('',#29487,.T.); +#29487 = EDGE_LOOP('',(#29488,#29489,#29497,#29503)); +#29488 = ORIENTED_EDGE('',*,*,#20358,.T.); +#29489 = ORIENTED_EDGE('',*,*,#29490,.F.); +#29490 = EDGE_CURVE('',#29491,#20351,#29493,.T.); +#29491 = VERTEX_POINT('',#29492); +#29492 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.697925940153)); +#29493 = LINE('',#29494,#29495); +#29494 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.697925940153)); +#29495 = VECTOR('',#29496,1.); +#29496 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29497 = ORIENTED_EDGE('',*,*,#29498,.F.); +#29498 = EDGE_CURVE('',#29467,#29491,#29499,.T.); +#29499 = LINE('',#29500,#29501); +#29500 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.697925940153)); +#29501 = VECTOR('',#29502,1.); +#29502 = DIRECTION('',(-0.,1.,-0.)); +#29503 = ORIENTED_EDGE('',*,*,#29466,.T.); +#29504 = PLANE('',#29505); +#29505 = AXIS2_PLACEMENT_3D('',#29506,#29507,#29508); +#29506 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.697925940153)); +#29507 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#29508 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#29509 = ADVANCED_FACE('',(#29510),#29528,.F.); +#29510 = FACE_BOUND('',#29511,.T.); +#29511 = EDGE_LOOP('',(#29512,#29513,#29521,#29527)); +#29512 = ORIENTED_EDGE('',*,*,#20350,.T.); +#29513 = ORIENTED_EDGE('',*,*,#29514,.F.); +#29514 = EDGE_CURVE('',#29515,#20343,#29517,.T.); +#29515 = VERTEX_POINT('',#29516); +#29516 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.709623216712)); +#29517 = LINE('',#29518,#29519); +#29518 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.709623216712)); +#29519 = VECTOR('',#29520,1.); +#29520 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29521 = ORIENTED_EDGE('',*,*,#29522,.F.); +#29522 = EDGE_CURVE('',#29491,#29515,#29523,.T.); +#29523 = LINE('',#29524,#29525); +#29524 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.709623216712)); +#29525 = VECTOR('',#29526,1.); +#29526 = DIRECTION('',(-0.,-0.,1.)); +#29527 = ORIENTED_EDGE('',*,*,#29490,.T.); +#29528 = PLANE('',#29529); +#29529 = AXIS2_PLACEMENT_3D('',#29530,#29531,#29532); +#29530 = CARTESIAN_POINT('',(2.241,7.038167264985E-02,1.709623216712)); +#29531 = DIRECTION('',(0.,-1.,0.)); +#29532 = DIRECTION('',(0.,-0.,-1.)); +#29533 = ADVANCED_FACE('',(#29534),#29552,.F.); +#29534 = FACE_BOUND('',#29535,.T.); +#29535 = EDGE_LOOP('',(#29536,#29537,#29545,#29551)); +#29536 = ORIENTED_EDGE('',*,*,#20342,.T.); +#29537 = ORIENTED_EDGE('',*,*,#29538,.F.); +#29538 = EDGE_CURVE('',#29539,#20335,#29541,.T.); +#29539 = VERTEX_POINT('',#29540); +#29540 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.709623216712)); +#29541 = LINE('',#29542,#29543); +#29542 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.709623216712)); +#29543 = VECTOR('',#29544,1.); +#29544 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29545 = ORIENTED_EDGE('',*,*,#29546,.F.); +#29546 = EDGE_CURVE('',#29515,#29539,#29547,.T.); +#29547 = LINE('',#29548,#29549); +#29548 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.709623216712)); +#29549 = VECTOR('',#29550,1.); +#29550 = DIRECTION('',(-0.,-1.,-4.139929772826E-15)); +#29551 = ORIENTED_EDGE('',*,*,#29514,.T.); +#29552 = PLANE('',#29553); +#29553 = AXIS2_PLACEMENT_3D('',#29554,#29555,#29556); +#29554 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.709623216712)); +#29555 = DIRECTION('',(-2.710505431214E-16,4.139929772826E-15,-1.)); +#29556 = DIRECTION('',(-4.229443015109E-47,1.,4.139929772826E-15)); +#29557 = ADVANCED_FACE('',(#29558),#29576,.F.); +#29558 = FACE_BOUND('',#29559,.T.); +#29559 = EDGE_LOOP('',(#29560,#29561,#29569,#29575)); +#29560 = ORIENTED_EDGE('',*,*,#20334,.T.); +#29561 = ORIENTED_EDGE('',*,*,#29562,.F.); +#29562 = EDGE_CURVE('',#29563,#20327,#29565,.T.); +#29563 = VERTEX_POINT('',#29564); +#29564 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.607934892496)); +#29565 = LINE('',#29566,#29567); +#29566 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.607934892496)); +#29567 = VECTOR('',#29568,1.); +#29568 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29569 = ORIENTED_EDGE('',*,*,#29570,.F.); +#29570 = EDGE_CURVE('',#29539,#29563,#29571,.T.); +#29571 = LINE('',#29572,#29573); +#29572 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.607934892496)); +#29573 = VECTOR('',#29574,1.); +#29574 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#29575 = ORIENTED_EDGE('',*,*,#29538,.T.); +#29576 = PLANE('',#29577); +#29577 = AXIS2_PLACEMENT_3D('',#29578,#29579,#29580); +#29578 = CARTESIAN_POINT('',(2.241,1.800386761547E-02,1.607934892496)); +#29579 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#29580 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#29581 = ADVANCED_FACE('',(#29582),#29593,.F.); +#29582 = FACE_BOUND('',#29583,.T.); +#29583 = EDGE_LOOP('',(#29584,#29585,#29586,#29592)); +#29584 = ORIENTED_EDGE('',*,*,#20326,.T.); +#29585 = ORIENTED_EDGE('',*,*,#29331,.F.); +#29586 = ORIENTED_EDGE('',*,*,#29587,.F.); +#29587 = EDGE_CURVE('',#29563,#29324,#29588,.T.); +#29588 = LINE('',#29589,#29590); +#29589 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.607934892496)); +#29590 = VECTOR('',#29591,1.); +#29591 = DIRECTION('',(-0.,1.,3.964809169307E-15)); +#29592 = ORIENTED_EDGE('',*,*,#29562,.T.); +#29593 = PLANE('',#29594); +#29594 = AXIS2_PLACEMENT_3D('',#29595,#29596,#29597); +#29595 = CARTESIAN_POINT('',(2.241,7.26951340138E-02,1.607934892496)); +#29596 = DIRECTION('',(2.710505431214E-16,-3.964809169307E-15,1.)); +#29597 = DIRECTION('',(-3.510457267357E-47,-1.,-3.964809169307E-15)); +#29598 = ADVANCED_FACE('',(#29599),#29613,.F.); +#29599 = FACE_BOUND('',#29600,.T.); +#29600 = EDGE_LOOP('',(#29601,#29602,#29603,#29604,#29605,#29606,#29607, + #29608,#29609,#29610,#29611,#29612)); +#29601 = ORIENTED_EDGE('',*,*,#29323,.T.); +#29602 = ORIENTED_EDGE('',*,*,#29354,.T.); +#29603 = ORIENTED_EDGE('',*,*,#29378,.T.); +#29604 = ORIENTED_EDGE('',*,*,#29402,.T.); +#29605 = ORIENTED_EDGE('',*,*,#29426,.T.); +#29606 = ORIENTED_EDGE('',*,*,#29450,.T.); +#29607 = ORIENTED_EDGE('',*,*,#29474,.T.); +#29608 = ORIENTED_EDGE('',*,*,#29498,.T.); +#29609 = ORIENTED_EDGE('',*,*,#29522,.T.); +#29610 = ORIENTED_EDGE('',*,*,#29546,.T.); +#29611 = ORIENTED_EDGE('',*,*,#29570,.T.); +#29612 = ORIENTED_EDGE('',*,*,#29587,.T.); +#29613 = PLANE('',#29614); +#29614 = AXIS2_PLACEMENT_3D('',#29615,#29616,#29617); +#29615 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#29616 = DIRECTION('',(-1.,0.,-0.)); +#29617 = DIRECTION('',(0.,0.,1.)); +#29618 = ADVANCED_FACE('',(#29619,#29681),#29743,.T.); +#29619 = FACE_BOUND('',#29620,.T.); +#29620 = EDGE_LOOP('',(#29621,#29631,#29640,#29649,#29658,#29667,#29675) + ); +#29621 = ORIENTED_EDGE('',*,*,#29622,.T.); +#29622 = EDGE_CURVE('',#29623,#29625,#29627,.T.); +#29623 = VERTEX_POINT('',#29624); +#29624 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.607934892496)); +#29625 = VERTEX_POINT('',#29626); +#29626 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29627 = LINE('',#29628,#29629); +#29628 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29629 = VECTOR('',#29630,1.); +#29630 = DIRECTION('',(-0.,1.,-0.)); +#29631 = ORIENTED_EDGE('',*,*,#29632,.T.); +#29632 = EDGE_CURVE('',#29625,#29633,#29635,.T.); +#29633 = VERTEX_POINT('',#29634); +#29634 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29635 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29636,#29637,#29638,#29639), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#29636 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29637 = CARTESIAN_POINT('',(2.241,0.135964403222,1.607934892496)); +#29638 = CARTESIAN_POINT('',(2.241,0.149143334811,1.612665791015)); +#29639 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29640 = ORIENTED_EDGE('',*,*,#29641,.T.); +#29641 = EDGE_CURVE('',#29633,#29642,#29644,.T.); +#29642 = VERTEX_POINT('',#29643); +#29643 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29644 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29645,#29646,#29647,#29648), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#29645 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29646 = CARTESIAN_POINT('',(2.241,0.169574577866,1.631693360884)); +#29647 = CARTESIAN_POINT('',(2.241,0.174695385605,1.644326419566)); +#29648 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29649 = ORIENTED_EDGE('',*,*,#29650,.T.); +#29650 = EDGE_CURVE('',#29642,#29651,#29653,.T.); +#29651 = VERTEX_POINT('',#29652); +#29652 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29653 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29654,#29655,#29656,#29657), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#29654 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29655 = CARTESIAN_POINT('',(2.241,0.174695385605,1.675155241785)); +#29656 = CARTESIAN_POINT('',(2.241,0.169574577866,1.687164445719)); +#29657 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29658 = ORIENTED_EDGE('',*,*,#29659,.T.); +#29659 = EDGE_CURVE('',#29651,#29660,#29662,.T.); +#29660 = VERTEX_POINT('',#29661); +#29661 = CARTESIAN_POINT('',(2.241,0.120913907383,1.709623216712)); +#29662 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29663,#29664,#29665,#29666), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#29663 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29664 = CARTESIAN_POINT('',(2.241,0.149143334811,1.705152257671)); +#29665 = CARTESIAN_POINT('',(2.241,0.136328318492,1.709623216712)); +#29666 = CARTESIAN_POINT('',(2.241,0.120913907383,1.709623216712)); +#29667 = ORIENTED_EDGE('',*,*,#29668,.T.); +#29668 = EDGE_CURVE('',#29660,#29669,#29671,.T.); +#29669 = VERTEX_POINT('',#29670); +#29670 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.709623216712)); +#29671 = LINE('',#29672,#29673); +#29672 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.709623216712)); +#29673 = VECTOR('',#29674,1.); +#29674 = DIRECTION('',(-0.,-1.,-0.)); +#29675 = ORIENTED_EDGE('',*,*,#29676,.T.); +#29676 = EDGE_CURVE('',#29669,#29623,#29677,.T.); +#29677 = LINE('',#29678,#29679); +#29678 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.607934892496)); +#29679 = VECTOR('',#29680,1.); +#29680 = DIRECTION('',(-0.,3.19860371635E-15,-1.)); +#29681 = FACE_BOUND('',#29682,.T.); +#29682 = EDGE_LOOP('',(#29683,#29693,#29701,#29710,#29719,#29728,#29737) + ); +#29683 = ORIENTED_EDGE('',*,*,#29684,.F.); +#29684 = EDGE_CURVE('',#29685,#29687,#29689,.T.); +#29685 = VERTEX_POINT('',#29686); +#29686 = CARTESIAN_POINT('',(2.241,0.105031605211,1.697925940153)); +#29687 = VERTEX_POINT('',#29688); +#29688 = CARTESIAN_POINT('',(2.241,0.105031605211,1.619528193263)); +#29689 = LINE('',#29690,#29691); +#29690 = CARTESIAN_POINT('',(2.241,0.105031605211,1.697925940153)); +#29691 = VECTOR('',#29692,1.); +#29692 = DIRECTION('',(0.,2.765901356838E-15,-1.)); +#29693 = ORIENTED_EDGE('',*,*,#29694,.F.); +#29694 = EDGE_CURVE('',#29695,#29685,#29697,.T.); +#29695 = VERTEX_POINT('',#29696); +#29696 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#29697 = LINE('',#29698,#29699); +#29698 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#29699 = VECTOR('',#29700,1.); +#29700 = DIRECTION('',(0.,-1.,0.)); +#29701 = ORIENTED_EDGE('',*,*,#29702,.F.); +#29702 = EDGE_CURVE('',#29703,#29695,#29705,.T.); +#29703 = VERTEX_POINT('',#29704); +#29704 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#29705 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29706,#29707,#29708,#29709), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#29706 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#29707 = CARTESIAN_POINT('',(2.241,0.142306926511,1.694754678508)); +#29708 = CARTESIAN_POINT('',(2.241,0.13250720815,1.697925940153)); +#29709 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#29710 = ORIENTED_EDGE('',*,*,#29711,.F.); +#29711 = EDGE_CURVE('',#29712,#29703,#29714,.T.); +#29712 = VERTEX_POINT('',#29713); +#29713 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#29714 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29715,#29716,#29717,#29718), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#29715 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#29716 = CARTESIAN_POINT('',(2.241,0.160892599265,1.672399883308)); +#29717 = CARTESIAN_POINT('',(2.241,0.157175464714,1.681965656137)); +#29718 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#29719 = ORIENTED_EDGE('',*,*,#29720,.F.); +#29720 = EDGE_CURVE('',#29721,#29712,#29723,.T.); +#29721 = VERTEX_POINT('',#29722); +#29722 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#29723 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29724,#29725,#29726,#29727), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#29724 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#29725 = CARTESIAN_POINT('',(2.241,0.157279440506,1.637152089944)); +#29726 = CARTESIAN_POINT('',(2.241,0.160892599265,1.647029790149)); +#29727 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#29728 = ORIENTED_EDGE('',*,*,#29729,.F.); +#29729 = EDGE_CURVE('',#29730,#29721,#29732,.T.); +#29730 = VERTEX_POINT('',#29731); +#29731 = CARTESIAN_POINT('',(2.241,0.119796167623,1.619528193263)); +#29732 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29733,#29734,#29735,#29736), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#29733 = CARTESIAN_POINT('',(2.241,0.119796167623,1.619528193263)); +#29734 = CARTESIAN_POINT('',(2.241,0.132715159733,1.619528193263)); +#29735 = CARTESIAN_POINT('',(2.241,0.142800811521,1.623063370178)); +#29736 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#29737 = ORIENTED_EDGE('',*,*,#29738,.F.); +#29738 = EDGE_CURVE('',#29687,#29730,#29739,.T.); +#29739 = LINE('',#29740,#29741); +#29740 = CARTESIAN_POINT('',(2.241,0.105031605211,1.619528193263)); +#29741 = VECTOR('',#29742,1.); +#29742 = DIRECTION('',(0.,1.,0.)); +#29743 = PLANE('',#29744); +#29744 = AXIS2_PLACEMENT_3D('',#29745,#29746,#29747); +#29745 = CARTESIAN_POINT('',(2.241,0.142085977954,1.706263498944)); +#29746 = DIRECTION('',(1.,-0.,0.)); +#29747 = DIRECTION('',(0.,0.,-1.)); +#29748 = ADVANCED_FACE('',(#29749),#29765,.F.); +#29749 = FACE_BOUND('',#29750,.T.); +#29750 = EDGE_LOOP('',(#29751,#29752,#29758,#29759)); +#29751 = ORIENTED_EDGE('',*,*,#20414,.T.); +#29752 = ORIENTED_EDGE('',*,*,#29753,.F.); +#29753 = EDGE_CURVE('',#29625,#20417,#29754,.T.); +#29754 = LINE('',#29755,#29756); +#29755 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29756 = VECTOR('',#29757,1.); +#29757 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29758 = ORIENTED_EDGE('',*,*,#29622,.F.); +#29759 = ORIENTED_EDGE('',*,*,#29760,.T.); +#29760 = EDGE_CURVE('',#29623,#20415,#29761,.T.); +#29761 = LINE('',#29762,#29763); +#29762 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.607934892496)); +#29763 = VECTOR('',#29764,1.); +#29764 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29765 = PLANE('',#29766); +#29766 = AXIS2_PLACEMENT_3D('',#29767,#29768,#29769); +#29767 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29768 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#29769 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#29770 = ADVANCED_FACE('',(#29771),#29782,.F.); +#29771 = FACE_BOUND('',#29772,.F.); +#29772 = EDGE_LOOP('',(#29773,#29774,#29775,#29781)); +#29773 = ORIENTED_EDGE('',*,*,#29753,.F.); +#29774 = ORIENTED_EDGE('',*,*,#29632,.T.); +#29775 = ORIENTED_EDGE('',*,*,#29776,.T.); +#29776 = EDGE_CURVE('',#29633,#20459,#29777,.T.); +#29777 = LINE('',#29778,#29779); +#29778 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29779 = VECTOR('',#29780,1.); +#29780 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29781 = ORIENTED_EDGE('',*,*,#20467,.F.); +#29782 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29783,#29784) + ,(#29785,#29786) + ,(#29787,#29788) + ,(#29789,#29790 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29783 = CARTESIAN_POINT('',(2.241,0.119874149467,1.607934892496)); +#29784 = CARTESIAN_POINT('',(2.24,0.119874149467,1.607934892496)); +#29785 = CARTESIAN_POINT('',(2.241,0.135964403222,1.607934892496)); +#29786 = CARTESIAN_POINT('',(2.24,0.135964403222,1.607934892496)); +#29787 = CARTESIAN_POINT('',(2.241,0.149143334811,1.612665791015)); +#29788 = CARTESIAN_POINT('',(2.24,0.149143334811,1.612665791015)); +#29789 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29790 = CARTESIAN_POINT('',(2.24,0.159358956338,1.622179575949)); +#29791 = ADVANCED_FACE('',(#29792),#29803,.F.); +#29792 = FACE_BOUND('',#29793,.F.); +#29793 = EDGE_LOOP('',(#29794,#29795,#29796,#29802)); +#29794 = ORIENTED_EDGE('',*,*,#29776,.F.); +#29795 = ORIENTED_EDGE('',*,*,#29641,.T.); +#29796 = ORIENTED_EDGE('',*,*,#29797,.T.); +#29797 = EDGE_CURVE('',#29642,#20450,#29798,.T.); +#29798 = LINE('',#29799,#29800); +#29799 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29800 = VECTOR('',#29801,1.); +#29801 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29802 = ORIENTED_EDGE('',*,*,#20458,.F.); +#29803 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29804,#29805) + ,(#29806,#29807) + ,(#29808,#29809) + ,(#29810,#29811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29804 = CARTESIAN_POINT('',(2.241,0.159358956338,1.622179575949)); +#29805 = CARTESIAN_POINT('',(2.24,0.159358956338,1.622179575949)); +#29806 = CARTESIAN_POINT('',(2.241,0.169574577866,1.631693360884)); +#29807 = CARTESIAN_POINT('',(2.24,0.169574577866,1.631693360884)); +#29808 = CARTESIAN_POINT('',(2.241,0.174695385605,1.644326419566)); +#29809 = CARTESIAN_POINT('',(2.24,0.174695385605,1.644326419566)); +#29810 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29811 = CARTESIAN_POINT('',(2.24,0.174695385605,1.660078751999)); +#29812 = ADVANCED_FACE('',(#29813),#29824,.F.); +#29813 = FACE_BOUND('',#29814,.F.); +#29814 = EDGE_LOOP('',(#29815,#29816,#29817,#29823)); +#29815 = ORIENTED_EDGE('',*,*,#29797,.F.); +#29816 = ORIENTED_EDGE('',*,*,#29650,.T.); +#29817 = ORIENTED_EDGE('',*,*,#29818,.T.); +#29818 = EDGE_CURVE('',#29651,#20441,#29819,.T.); +#29819 = LINE('',#29820,#29821); +#29820 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29821 = VECTOR('',#29822,1.); +#29822 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29823 = ORIENTED_EDGE('',*,*,#20449,.F.); +#29824 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29825,#29826) + ,(#29827,#29828) + ,(#29829,#29830) + ,(#29831,#29832 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29825 = CARTESIAN_POINT('',(2.241,0.174695385605,1.660078751999)); +#29826 = CARTESIAN_POINT('',(2.24,0.174695385605,1.660078751999)); +#29827 = CARTESIAN_POINT('',(2.241,0.174695385605,1.675155241785)); +#29828 = CARTESIAN_POINT('',(2.24,0.174695385605,1.675155241785)); +#29829 = CARTESIAN_POINT('',(2.241,0.169574577866,1.687164445719)); +#29830 = CARTESIAN_POINT('',(2.24,0.169574577866,1.687164445719)); +#29831 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29832 = CARTESIAN_POINT('',(2.24,0.159358956338,1.696158351695)); +#29833 = ADVANCED_FACE('',(#29834),#29845,.F.); +#29834 = FACE_BOUND('',#29835,.F.); +#29835 = EDGE_LOOP('',(#29836,#29837,#29838,#29844)); +#29836 = ORIENTED_EDGE('',*,*,#29818,.F.); +#29837 = ORIENTED_EDGE('',*,*,#29659,.T.); +#29838 = ORIENTED_EDGE('',*,*,#29839,.T.); +#29839 = EDGE_CURVE('',#29660,#20433,#29840,.T.); +#29840 = LINE('',#29841,#29842); +#29841 = CARTESIAN_POINT('',(2.241,0.120913907383,1.709623216712)); +#29842 = VECTOR('',#29843,1.); +#29843 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29844 = ORIENTED_EDGE('',*,*,#20440,.F.); +#29845 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29846,#29847) + ,(#29848,#29849) + ,(#29850,#29851) + ,(#29852,#29853 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29846 = CARTESIAN_POINT('',(2.241,0.159358956338,1.696158351695)); +#29847 = CARTESIAN_POINT('',(2.24,0.159358956338,1.696158351695)); +#29848 = CARTESIAN_POINT('',(2.241,0.149143334811,1.705152257671)); +#29849 = CARTESIAN_POINT('',(2.24,0.149143334811,1.705152257671)); +#29850 = CARTESIAN_POINT('',(2.241,0.136328318492,1.709623216712)); +#29851 = CARTESIAN_POINT('',(2.24,0.136328318492,1.709623216712)); +#29852 = CARTESIAN_POINT('',(2.241,0.120913907383,1.709623216712)); +#29853 = CARTESIAN_POINT('',(2.24,0.120913907383,1.709623216712)); +#29854 = ADVANCED_FACE('',(#29855),#29866,.F.); +#29855 = FACE_BOUND('',#29856,.T.); +#29856 = EDGE_LOOP('',(#29857,#29858,#29864,#29865)); +#29857 = ORIENTED_EDGE('',*,*,#20432,.T.); +#29858 = ORIENTED_EDGE('',*,*,#29859,.F.); +#29859 = EDGE_CURVE('',#29669,#20425,#29860,.T.); +#29860 = LINE('',#29861,#29862); +#29861 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.709623216712)); +#29862 = VECTOR('',#29863,1.); +#29863 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29864 = ORIENTED_EDGE('',*,*,#29668,.F.); +#29865 = ORIENTED_EDGE('',*,*,#29839,.T.); +#29866 = PLANE('',#29867); +#29867 = AXIS2_PLACEMENT_3D('',#29868,#29869,#29870); +#29868 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.709623216712)); +#29869 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#29870 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#29871 = ADVANCED_FACE('',(#29872),#29878,.F.); +#29872 = FACE_BOUND('',#29873,.T.); +#29873 = EDGE_LOOP('',(#29874,#29875,#29876,#29877)); +#29874 = ORIENTED_EDGE('',*,*,#20424,.T.); +#29875 = ORIENTED_EDGE('',*,*,#29760,.F.); +#29876 = ORIENTED_EDGE('',*,*,#29676,.F.); +#29877 = ORIENTED_EDGE('',*,*,#29859,.T.); +#29878 = PLANE('',#29879); +#29879 = AXIS2_PLACEMENT_3D('',#29880,#29881,#29882); +#29880 = CARTESIAN_POINT('',(2.241,9.190466151804E-02,1.607934892496)); +#29881 = DIRECTION('',(8.669832745468E-31,1.,3.19860371635E-15)); +#29882 = DIRECTION('',(0.,-3.19860371635E-15,1.)); +#29883 = ADVANCED_FACE('',(#29884),#29909,.T.); +#29884 = FACE_BOUND('',#29885,.T.); +#29885 = EDGE_LOOP('',(#29886,#29896,#29902,#29903)); +#29886 = ORIENTED_EDGE('',*,*,#29887,.F.); +#29887 = EDGE_CURVE('',#29888,#29890,#29892,.T.); +#29888 = VERTEX_POINT('',#29889); +#29889 = CARTESIAN_POINT('',(2.24,0.120394028425,1.697925940153)); +#29890 = VERTEX_POINT('',#29891); +#29891 = CARTESIAN_POINT('',(2.24,0.105031605211,1.697925940153)); +#29892 = LINE('',#29893,#29894); +#29893 = CARTESIAN_POINT('',(2.24,0.120394028425,1.697925940153)); +#29894 = VECTOR('',#29895,1.); +#29895 = DIRECTION('',(0.,-1.,0.)); +#29896 = ORIENTED_EDGE('',*,*,#29897,.F.); +#29897 = EDGE_CURVE('',#29695,#29888,#29898,.T.); +#29898 = LINE('',#29899,#29900); +#29899 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#29900 = VECTOR('',#29901,1.); +#29901 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29902 = ORIENTED_EDGE('',*,*,#29694,.T.); +#29903 = ORIENTED_EDGE('',*,*,#29904,.T.); +#29904 = EDGE_CURVE('',#29685,#29890,#29905,.T.); +#29905 = LINE('',#29906,#29907); +#29906 = CARTESIAN_POINT('',(2.241,0.105031605211,1.697925940153)); +#29907 = VECTOR('',#29908,1.); +#29908 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29909 = PLANE('',#29910); +#29910 = AXIS2_PLACEMENT_3D('',#29911,#29912,#29913); +#29911 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#29912 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#29913 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#29914 = ADVANCED_FACE('',(#29915),#29933,.T.); +#29915 = FACE_BOUND('',#29916,.T.); +#29916 = EDGE_LOOP('',(#29917,#29925,#29926,#29927)); +#29917 = ORIENTED_EDGE('',*,*,#29918,.F.); +#29918 = EDGE_CURVE('',#29890,#29919,#29921,.T.); +#29919 = VERTEX_POINT('',#29920); +#29920 = CARTESIAN_POINT('',(2.24,0.105031605211,1.619528193263)); +#29921 = LINE('',#29922,#29923); +#29922 = CARTESIAN_POINT('',(2.24,0.105031605211,1.697925940153)); +#29923 = VECTOR('',#29924,1.); +#29924 = DIRECTION('',(0.,2.765901356838E-15,-1.)); +#29925 = ORIENTED_EDGE('',*,*,#29904,.F.); +#29926 = ORIENTED_EDGE('',*,*,#29684,.T.); +#29927 = ORIENTED_EDGE('',*,*,#29928,.T.); +#29928 = EDGE_CURVE('',#29687,#29919,#29929,.T.); +#29929 = LINE('',#29930,#29931); +#29930 = CARTESIAN_POINT('',(2.241,0.105031605211,1.619528193263)); +#29931 = VECTOR('',#29932,1.); +#29932 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29933 = PLANE('',#29934); +#29934 = AXIS2_PLACEMENT_3D('',#29935,#29936,#29937); +#29935 = CARTESIAN_POINT('',(2.241,0.105031605211,1.697925940153)); +#29936 = DIRECTION('',(7.496990649911E-31,1.,2.765901356838E-15)); +#29937 = DIRECTION('',(0.,-2.765901356838E-15,1.)); +#29938 = ADVANCED_FACE('',(#29939),#29957,.T.); +#29939 = FACE_BOUND('',#29940,.T.); +#29940 = EDGE_LOOP('',(#29941,#29949,#29950,#29951)); +#29941 = ORIENTED_EDGE('',*,*,#29942,.F.); +#29942 = EDGE_CURVE('',#29919,#29943,#29945,.T.); +#29943 = VERTEX_POINT('',#29944); +#29944 = CARTESIAN_POINT('',(2.24,0.119796167623,1.619528193263)); +#29945 = LINE('',#29946,#29947); +#29946 = CARTESIAN_POINT('',(2.24,0.105031605211,1.619528193263)); +#29947 = VECTOR('',#29948,1.); +#29948 = DIRECTION('',(0.,1.,0.)); +#29949 = ORIENTED_EDGE('',*,*,#29928,.F.); +#29950 = ORIENTED_EDGE('',*,*,#29738,.T.); +#29951 = ORIENTED_EDGE('',*,*,#29952,.T.); +#29952 = EDGE_CURVE('',#29730,#29943,#29953,.T.); +#29953 = LINE('',#29954,#29955); +#29954 = CARTESIAN_POINT('',(2.241,0.119796167623,1.619528193263)); +#29955 = VECTOR('',#29956,1.); +#29956 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29957 = PLANE('',#29958); +#29958 = AXIS2_PLACEMENT_3D('',#29959,#29960,#29961); +#29959 = CARTESIAN_POINT('',(2.241,0.105031605211,1.619528193263)); +#29960 = DIRECTION('',(2.710505431214E-16,-0.,1.)); +#29961 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#29962 = ADVANCED_FACE('',(#29963),#29982,.T.); +#29963 = FACE_BOUND('',#29964,.T.); +#29964 = EDGE_LOOP('',(#29965,#29974,#29975,#29976)); +#29965 = ORIENTED_EDGE('',*,*,#29966,.F.); +#29966 = EDGE_CURVE('',#29943,#29967,#29969,.T.); +#29967 = VERTEX_POINT('',#29968); +#29968 = CARTESIAN_POINT('',(2.24,0.15002712904,1.630133724009)); +#29969 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29970,#29971,#29972,#29973), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#29970 = CARTESIAN_POINT('',(2.24,0.119796167623,1.619528193263)); +#29971 = CARTESIAN_POINT('',(2.24,0.132715159733,1.619528193263)); +#29972 = CARTESIAN_POINT('',(2.24,0.142800811521,1.623063370178)); +#29973 = CARTESIAN_POINT('',(2.24,0.15002712904,1.630133724009)); +#29974 = ORIENTED_EDGE('',*,*,#29952,.F.); +#29975 = ORIENTED_EDGE('',*,*,#29729,.T.); +#29976 = ORIENTED_EDGE('',*,*,#29977,.T.); +#29977 = EDGE_CURVE('',#29721,#29967,#29978,.T.); +#29978 = LINE('',#29979,#29980); +#29979 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#29980 = VECTOR('',#29981,1.); +#29981 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#29982 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#29983,#29984) + ,(#29985,#29986) + ,(#29987,#29988) + ,(#29989,#29990 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29983 = CARTESIAN_POINT('',(2.241,0.119796167623,1.619528193263)); +#29984 = CARTESIAN_POINT('',(2.24,0.119796167623,1.619528193263)); +#29985 = CARTESIAN_POINT('',(2.241,0.132715159733,1.619528193263)); +#29986 = CARTESIAN_POINT('',(2.24,0.132715159733,1.619528193263)); +#29987 = CARTESIAN_POINT('',(2.241,0.142800811521,1.623063370178)); +#29988 = CARTESIAN_POINT('',(2.24,0.142800811521,1.623063370178)); +#29989 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#29990 = CARTESIAN_POINT('',(2.24,0.15002712904,1.630133724009)); +#29991 = ADVANCED_FACE('',(#29992),#30011,.T.); +#29992 = FACE_BOUND('',#29993,.T.); +#29993 = EDGE_LOOP('',(#29994,#30003,#30004,#30005)); +#29994 = ORIENTED_EDGE('',*,*,#29995,.F.); +#29995 = EDGE_CURVE('',#29967,#29996,#29998,.T.); +#29996 = VERTEX_POINT('',#29997); +#29997 = CARTESIAN_POINT('',(2.24,0.160892599265,1.659714836728)); +#29998 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29999,#30000,#30001,#30002), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#29999 = CARTESIAN_POINT('',(2.24,0.15002712904,1.630133724009)); +#30000 = CARTESIAN_POINT('',(2.24,0.157279440506,1.637152089944)); +#30001 = CARTESIAN_POINT('',(2.24,0.160892599265,1.647029790149)); +#30002 = CARTESIAN_POINT('',(2.24,0.160892599265,1.659714836728)); +#30003 = ORIENTED_EDGE('',*,*,#29977,.F.); +#30004 = ORIENTED_EDGE('',*,*,#29720,.T.); +#30005 = ORIENTED_EDGE('',*,*,#30006,.T.); +#30006 = EDGE_CURVE('',#29712,#29996,#30007,.T.); +#30007 = LINE('',#30008,#30009); +#30008 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#30009 = VECTOR('',#30010,1.); +#30010 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30011 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30012,#30013) + ,(#30014,#30015) + ,(#30016,#30017) + ,(#30018,#30019 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30012 = CARTESIAN_POINT('',(2.241,0.15002712904,1.630133724009)); +#30013 = CARTESIAN_POINT('',(2.24,0.15002712904,1.630133724009)); +#30014 = CARTESIAN_POINT('',(2.241,0.157279440506,1.637152089944)); +#30015 = CARTESIAN_POINT('',(2.24,0.157279440506,1.637152089944)); +#30016 = CARTESIAN_POINT('',(2.241,0.160892599265,1.647029790149)); +#30017 = CARTESIAN_POINT('',(2.24,0.160892599265,1.647029790149)); +#30018 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#30019 = CARTESIAN_POINT('',(2.24,0.160892599265,1.659714836728)); +#30020 = ADVANCED_FACE('',(#30021),#30040,.T.); +#30021 = FACE_BOUND('',#30022,.T.); +#30022 = EDGE_LOOP('',(#30023,#30032,#30033,#30034)); +#30023 = ORIENTED_EDGE('',*,*,#30024,.F.); +#30024 = EDGE_CURVE('',#29996,#30025,#30027,.T.); +#30025 = VERTEX_POINT('',#30026); +#30026 = CARTESIAN_POINT('',(2.24,0.149741195612,1.688360167323)); +#30027 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30028,#30029,#30030,#30031), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#30028 = CARTESIAN_POINT('',(2.24,0.160892599265,1.659714836728)); +#30029 = CARTESIAN_POINT('',(2.24,0.160892599265,1.672399883308)); +#30030 = CARTESIAN_POINT('',(2.24,0.157175464714,1.681965656137)); +#30031 = CARTESIAN_POINT('',(2.24,0.149741195612,1.688360167323)); +#30032 = ORIENTED_EDGE('',*,*,#30006,.F.); +#30033 = ORIENTED_EDGE('',*,*,#29711,.T.); +#30034 = ORIENTED_EDGE('',*,*,#30035,.T.); +#30035 = EDGE_CURVE('',#29703,#30025,#30036,.T.); +#30036 = LINE('',#30037,#30038); +#30037 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#30038 = VECTOR('',#30039,1.); +#30039 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30040 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30041,#30042) + ,(#30043,#30044) + ,(#30045,#30046) + ,(#30047,#30048 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30041 = CARTESIAN_POINT('',(2.241,0.160892599265,1.659714836728)); +#30042 = CARTESIAN_POINT('',(2.24,0.160892599265,1.659714836728)); +#30043 = CARTESIAN_POINT('',(2.241,0.160892599265,1.672399883308)); +#30044 = CARTESIAN_POINT('',(2.24,0.160892599265,1.672399883308)); +#30045 = CARTESIAN_POINT('',(2.241,0.157175464714,1.681965656137)); +#30046 = CARTESIAN_POINT('',(2.24,0.157175464714,1.681965656137)); +#30047 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#30048 = CARTESIAN_POINT('',(2.24,0.149741195612,1.688360167323)); +#30049 = ADVANCED_FACE('',(#30050),#30062,.T.); +#30050 = FACE_BOUND('',#30051,.T.); +#30051 = EDGE_LOOP('',(#30052,#30059,#30060,#30061)); +#30052 = ORIENTED_EDGE('',*,*,#30053,.F.); +#30053 = EDGE_CURVE('',#30025,#29888,#30054,.T.); +#30054 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30055,#30056,#30057,#30058), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#30055 = CARTESIAN_POINT('',(2.24,0.149741195612,1.688360167323)); +#30056 = CARTESIAN_POINT('',(2.24,0.142306926511,1.694754678508)); +#30057 = CARTESIAN_POINT('',(2.24,0.13250720815,1.697925940153)); +#30058 = CARTESIAN_POINT('',(2.24,0.120394028425,1.697925940153)); +#30059 = ORIENTED_EDGE('',*,*,#30035,.F.); +#30060 = ORIENTED_EDGE('',*,*,#29702,.T.); +#30061 = ORIENTED_EDGE('',*,*,#29897,.T.); +#30062 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30063,#30064) + ,(#30065,#30066) + ,(#30067,#30068) + ,(#30069,#30070 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30063 = CARTESIAN_POINT('',(2.241,0.149741195612,1.688360167323)); +#30064 = CARTESIAN_POINT('',(2.24,0.149741195612,1.688360167323)); +#30065 = CARTESIAN_POINT('',(2.241,0.142306926511,1.694754678508)); +#30066 = CARTESIAN_POINT('',(2.24,0.142306926511,1.694754678508)); +#30067 = CARTESIAN_POINT('',(2.241,0.13250720815,1.697925940153)); +#30068 = CARTESIAN_POINT('',(2.24,0.13250720815,1.697925940153)); +#30069 = CARTESIAN_POINT('',(2.241,0.120394028425,1.697925940153)); +#30070 = CARTESIAN_POINT('',(2.24,0.120394028425,1.697925940153)); +#30071 = ADVANCED_FACE('',(#30072),#30081,.F.); +#30072 = FACE_BOUND('',#30073,.T.); +#30073 = EDGE_LOOP('',(#30074,#30075,#30076,#30077,#30078,#30079,#30080) + ); +#30074 = ORIENTED_EDGE('',*,*,#30053,.T.); +#30075 = ORIENTED_EDGE('',*,*,#29887,.T.); +#30076 = ORIENTED_EDGE('',*,*,#29918,.T.); +#30077 = ORIENTED_EDGE('',*,*,#29942,.T.); +#30078 = ORIENTED_EDGE('',*,*,#29966,.T.); +#30079 = ORIENTED_EDGE('',*,*,#29995,.T.); +#30080 = ORIENTED_EDGE('',*,*,#30024,.T.); +#30081 = PLANE('',#30082); +#30082 = AXIS2_PLACEMENT_3D('',#30083,#30084,#30085); +#30083 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#30084 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#30085 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#30086 = ADVANCED_FACE('',(#30087,#30153),#30205,.F.); +#30087 = FACE_BOUND('',#30088,.T.); +#30088 = EDGE_LOOP('',(#30089,#30099,#30107,#30115,#30123,#30131,#30139, + #30147)); +#30089 = ORIENTED_EDGE('',*,*,#30090,.T.); +#30090 = EDGE_CURVE('',#30091,#30093,#30095,.T.); +#30091 = VERTEX_POINT('',#30092); +#30092 = CARTESIAN_POINT('',(2.241,0.271834768936,1.607934892496)); +#30093 = VERTEX_POINT('',#30094); +#30094 = CARTESIAN_POINT('',(2.241,0.233103786554,1.709623216712)); +#30095 = LINE('',#30096,#30097); +#30096 = CARTESIAN_POINT('',(2.241,0.233103786554,1.709623216712)); +#30097 = VECTOR('',#30098,1.); +#30098 = DIRECTION('',(-0.,-0.355935724364,0.934510438744)); +#30099 = ORIENTED_EDGE('',*,*,#30100,.T.); +#30100 = EDGE_CURVE('',#30093,#30101,#30103,.T.); +#30101 = VERTEX_POINT('',#30102); +#30102 = CARTESIAN_POINT('',(2.241,0.219067054683,1.709623216712)); +#30103 = LINE('',#30104,#30105); +#30104 = CARTESIAN_POINT('',(2.241,0.219067054683,1.709623216712)); +#30105 = VECTOR('',#30106,1.); +#30106 = DIRECTION('',(-0.,-1.,-0.)); +#30107 = ORIENTED_EDGE('',*,*,#30108,.T.); +#30108 = EDGE_CURVE('',#30101,#30109,#30111,.T.); +#30109 = VERTEX_POINT('',#30110); +#30110 = CARTESIAN_POINT('',(2.241,0.1803360723,1.607934892496)); +#30111 = LINE('',#30112,#30113); +#30112 = CARTESIAN_POINT('',(2.241,0.1803360723,1.607934892496)); +#30113 = VECTOR('',#30114,1.); +#30114 = DIRECTION('',(-0.,-0.35593572437,-0.934510438742)); +#30115 = ORIENTED_EDGE('',*,*,#30116,.T.); +#30116 = EDGE_CURVE('',#30109,#30117,#30119,.T.); +#30117 = VERTEX_POINT('',#30118); +#30118 = CARTESIAN_POINT('',(2.241,0.194840695233,1.607934892496)); +#30119 = LINE('',#30120,#30121); +#30120 = CARTESIAN_POINT('',(2.241,0.194840695233,1.607934892496)); +#30121 = VECTOR('',#30122,1.); +#30122 = DIRECTION('',(-0.,1.,-0.)); +#30123 = ORIENTED_EDGE('',*,*,#30124,.T.); +#30124 = EDGE_CURVE('',#30117,#30125,#30127,.T.); +#30125 = VERTEX_POINT('',#30126); +#30126 = CARTESIAN_POINT('',(2.241,0.204614419646,1.635748416757)); +#30127 = LINE('',#30128,#30129); +#30128 = CARTESIAN_POINT('',(2.241,0.204614419646,1.635748416757)); +#30129 = VECTOR('',#30130,1.); +#30130 = DIRECTION('',(-0.,0.331528418358,0.94344523308)); +#30131 = ORIENTED_EDGE('',*,*,#30132,.T.); +#30132 = EDGE_CURVE('',#30125,#30133,#30135,.T.); +#30133 = VERTEX_POINT('',#30134); +#30134 = CARTESIAN_POINT('',(2.241,0.246958560788,1.635748416757)); +#30135 = LINE('',#30136,#30137); +#30136 = CARTESIAN_POINT('',(2.241,0.246958560788,1.635748416757)); +#30137 = VECTOR('',#30138,1.); +#30138 = DIRECTION('',(-0.,1.,-0.)); +#30139 = ORIENTED_EDGE('',*,*,#30140,.T.); +#30140 = EDGE_CURVE('',#30133,#30141,#30143,.T.); +#30141 = VERTEX_POINT('',#30142); +#30142 = CARTESIAN_POINT('',(2.241,0.257330146004,1.607934892496)); +#30143 = LINE('',#30144,#30145); +#30144 = CARTESIAN_POINT('',(2.241,0.257330146004,1.607934892496)); +#30145 = VECTOR('',#30146,1.); +#30146 = DIRECTION('',(-0.,0.349395479497,-0.936975345944)); +#30147 = ORIENTED_EDGE('',*,*,#30148,.T.); +#30148 = EDGE_CURVE('',#30141,#30091,#30149,.T.); +#30149 = LINE('',#30150,#30151); +#30150 = CARTESIAN_POINT('',(2.241,0.271834768936,1.607934892496)); +#30151 = VECTOR('',#30152,1.); +#30152 = DIRECTION('',(-0.,1.,1.494974640245E-14)); +#30153 = FACE_BOUND('',#30154,.T.); +#30154 = EDGE_LOOP('',(#30155,#30165,#30173,#30182,#30190,#30199)); +#30155 = ORIENTED_EDGE('',*,*,#30156,.F.); +#30156 = EDGE_CURVE('',#30157,#30159,#30161,.T.); +#30157 = VERTEX_POINT('',#30158); +#30158 = CARTESIAN_POINT('',(2.241,0.208773451312,1.647237741732)); +#30159 = VERTEX_POINT('',#30160); +#30160 = CARTESIAN_POINT('',(2.241,0.242903504915,1.647237741732)); +#30161 = LINE('',#30162,#30163); +#30162 = CARTESIAN_POINT('',(2.241,0.208773451312,1.647237741732)); +#30163 = VECTOR('',#30164,1.); +#30164 = DIRECTION('',(0.,1.,6.353357572162E-15)); +#30165 = ORIENTED_EDGE('',*,*,#30166,.F.); +#30166 = EDGE_CURVE('',#30167,#30157,#30169,.T.); +#30167 = VERTEX_POINT('',#30168); +#30168 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30169 = LINE('',#30170,#30171); +#30170 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30171 = VECTOR('',#30172,1.); +#30172 = DIRECTION('',(0.,-0.338535034296,-0.940953787683)); +#30173 = ORIENTED_EDGE('',*,*,#30174,.F.); +#30174 = EDGE_CURVE('',#30175,#30167,#30177,.T.); +#30175 = VERTEX_POINT('',#30176); +#30176 = CARTESIAN_POINT('',(2.241,0.225643523504,1.696626242757)); +#30177 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30178,#30179,#30180,#30181), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#30178 = CARTESIAN_POINT('',(2.241,0.225643523504,1.696626242757)); +#30179 = CARTESIAN_POINT('',(2.241,0.225149638493,1.693558956904)); +#30180 = CARTESIAN_POINT('',(2.241,0.224603765588,1.691167513696)); +#30181 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30182 = ORIENTED_EDGE('',*,*,#30183,.F.); +#30183 = EDGE_CURVE('',#30184,#30175,#30186,.T.); +#30184 = VERTEX_POINT('',#30185); +#30185 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30186 = LINE('',#30187,#30188); +#30187 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30188 = VECTOR('',#30189,1.); +#30189 = DIRECTION('',(0.,-1.,0.)); +#30190 = ORIENTED_EDGE('',*,*,#30191,.F.); +#30191 = EDGE_CURVE('',#30192,#30184,#30194,.T.); +#30192 = VERTEX_POINT('',#30193); +#30193 = CARTESIAN_POINT('',(2.241,0.227541081701,1.689503901031)); +#30194 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30195,#30196,#30197,#30198), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#30195 = CARTESIAN_POINT('',(2.241,0.227541081701,1.689503901031)); +#30196 = CARTESIAN_POINT('',(2.241,0.227047196691,1.690907574218)); +#30197 = CARTESIAN_POINT('',(2.241,0.226527317732,1.69324702953)); +#30198 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30199 = ORIENTED_EDGE('',*,*,#30200,.F.); +#30200 = EDGE_CURVE('',#30159,#30192,#30201,.T.); +#30201 = LINE('',#30202,#30203); +#30202 = CARTESIAN_POINT('',(2.241,0.242903504915,1.647237741732)); +#30203 = VECTOR('',#30204,1.); +#30204 = DIRECTION('',(0.,-0.34160383069,0.939844041774)); +#30205 = PLANE('',#30206); +#30206 = AXIS2_PLACEMENT_3D('',#30207,#30208,#30209); +#30207 = CARTESIAN_POINT('',(2.241,0.,-2.710505431214E-19)); +#30208 = DIRECTION('',(-1.,0.,-0.)); +#30209 = DIRECTION('',(0.,0.,1.)); +#30210 = ADVANCED_FACE('',(#30211),#30227,.F.); +#30211 = FACE_BOUND('',#30212,.T.); +#30212 = EDGE_LOOP('',(#30213,#30214,#30220,#30221)); +#30213 = ORIENTED_EDGE('',*,*,#20476,.T.); +#30214 = ORIENTED_EDGE('',*,*,#30215,.F.); +#30215 = EDGE_CURVE('',#30093,#20479,#30216,.T.); +#30216 = LINE('',#30217,#30218); +#30217 = CARTESIAN_POINT('',(2.241,0.233103786554,1.709623216712)); +#30218 = VECTOR('',#30219,1.); +#30219 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30220 = ORIENTED_EDGE('',*,*,#30090,.F.); +#30221 = ORIENTED_EDGE('',*,*,#30222,.T.); +#30222 = EDGE_CURVE('',#30091,#20477,#30223,.T.); +#30223 = LINE('',#30224,#30225); +#30224 = CARTESIAN_POINT('',(2.241,0.271834768936,1.607934892496)); +#30225 = VECTOR('',#30226,1.); +#30226 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30227 = PLANE('',#30228); +#30228 = AXIS2_PLACEMENT_3D('',#30229,#30230,#30231); +#30229 = CARTESIAN_POINT('',(2.241,0.233103786554,1.709623216712)); +#30230 = DIRECTION('',(-9.647657140525E-17,-0.934510438744, + -0.355935724364)); +#30231 = DIRECTION('',(-1.253113917987E-33,0.355935724364, + -0.934510438744)); +#30232 = ADVANCED_FACE('',(#30233),#30244,.F.); +#30233 = FACE_BOUND('',#30234,.T.); +#30234 = EDGE_LOOP('',(#30235,#30236,#30242,#30243)); +#30235 = ORIENTED_EDGE('',*,*,#20534,.T.); +#30236 = ORIENTED_EDGE('',*,*,#30237,.F.); +#30237 = EDGE_CURVE('',#30101,#20527,#30238,.T.); +#30238 = LINE('',#30239,#30240); +#30239 = CARTESIAN_POINT('',(2.241,0.219067054683,1.709623216712)); +#30240 = VECTOR('',#30241,1.); +#30241 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30242 = ORIENTED_EDGE('',*,*,#30100,.F.); +#30243 = ORIENTED_EDGE('',*,*,#30215,.T.); +#30244 = PLANE('',#30245); +#30245 = AXIS2_PLACEMENT_3D('',#30246,#30247,#30248); +#30246 = CARTESIAN_POINT('',(2.241,0.219067054683,1.709623216712)); +#30247 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#30248 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#30249 = ADVANCED_FACE('',(#30250),#30261,.F.); +#30250 = FACE_BOUND('',#30251,.T.); +#30251 = EDGE_LOOP('',(#30252,#30253,#30259,#30260)); +#30252 = ORIENTED_EDGE('',*,*,#20526,.T.); +#30253 = ORIENTED_EDGE('',*,*,#30254,.F.); +#30254 = EDGE_CURVE('',#30109,#20519,#30255,.T.); +#30255 = LINE('',#30256,#30257); +#30256 = CARTESIAN_POINT('',(2.241,0.1803360723,1.607934892496)); +#30257 = VECTOR('',#30258,1.); +#30258 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30259 = ORIENTED_EDGE('',*,*,#30108,.F.); +#30260 = ORIENTED_EDGE('',*,*,#30237,.T.); +#30261 = PLANE('',#30262); +#30262 = AXIS2_PLACEMENT_3D('',#30263,#30264,#30265); +#30263 = CARTESIAN_POINT('',(2.241,0.1803360723,1.607934892496)); +#30264 = DIRECTION('',(-9.647657140675E-17,0.934510438742,-0.35593572437 + )); +#30265 = DIRECTION('',(1.415420368854E-33,0.35593572437,0.934510438742) + ); +#30266 = ADVANCED_FACE('',(#30267),#30278,.F.); +#30267 = FACE_BOUND('',#30268,.T.); +#30268 = EDGE_LOOP('',(#30269,#30270,#30276,#30277)); +#30269 = ORIENTED_EDGE('',*,*,#20518,.T.); +#30270 = ORIENTED_EDGE('',*,*,#30271,.F.); +#30271 = EDGE_CURVE('',#30117,#20511,#30272,.T.); +#30272 = LINE('',#30273,#30274); +#30273 = CARTESIAN_POINT('',(2.241,0.194840695233,1.607934892496)); +#30274 = VECTOR('',#30275,1.); +#30275 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30276 = ORIENTED_EDGE('',*,*,#30116,.F.); +#30277 = ORIENTED_EDGE('',*,*,#30254,.T.); +#30278 = PLANE('',#30279); +#30279 = AXIS2_PLACEMENT_3D('',#30280,#30281,#30282); +#30280 = CARTESIAN_POINT('',(2.241,0.194840695233,1.607934892496)); +#30281 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#30282 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#30283 = ADVANCED_FACE('',(#30284),#30295,.F.); +#30284 = FACE_BOUND('',#30285,.T.); +#30285 = EDGE_LOOP('',(#30286,#30287,#30293,#30294)); +#30286 = ORIENTED_EDGE('',*,*,#20510,.T.); +#30287 = ORIENTED_EDGE('',*,*,#30288,.F.); +#30288 = EDGE_CURVE('',#30125,#20503,#30289,.T.); +#30289 = LINE('',#30290,#30291); +#30290 = CARTESIAN_POINT('',(2.241,0.204614419646,1.635748416757)); +#30291 = VECTOR('',#30292,1.); +#30292 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30293 = ORIENTED_EDGE('',*,*,#30124,.F.); +#30294 = ORIENTED_EDGE('',*,*,#30271,.T.); +#30295 = PLANE('',#30296); +#30296 = AXIS2_PLACEMENT_3D('',#30297,#30298,#30299); +#30297 = CARTESIAN_POINT('',(2.241,0.204614419646,1.635748416757)); +#30298 = DIRECTION('',(8.986095785601E-17,-0.94344523308,0.331528418358) + ); +#30299 = DIRECTION('',(1.81483367343E-33,-0.331528418358,-0.94344523308) + ); +#30300 = ADVANCED_FACE('',(#30301),#30312,.F.); +#30301 = FACE_BOUND('',#30302,.T.); +#30302 = EDGE_LOOP('',(#30303,#30304,#30310,#30311)); +#30303 = ORIENTED_EDGE('',*,*,#20502,.T.); +#30304 = ORIENTED_EDGE('',*,*,#30305,.F.); +#30305 = EDGE_CURVE('',#30133,#20495,#30306,.T.); +#30306 = LINE('',#30307,#30308); +#30307 = CARTESIAN_POINT('',(2.241,0.246958560788,1.635748416757)); +#30308 = VECTOR('',#30309,1.); +#30309 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30310 = ORIENTED_EDGE('',*,*,#30132,.F.); +#30311 = ORIENTED_EDGE('',*,*,#30288,.T.); +#30312 = PLANE('',#30313); +#30313 = AXIS2_PLACEMENT_3D('',#30314,#30315,#30316); +#30314 = CARTESIAN_POINT('',(2.241,0.246958560788,1.635748416757)); +#30315 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#30316 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#30317 = ADVANCED_FACE('',(#30318),#30329,.F.); +#30318 = FACE_BOUND('',#30319,.T.); +#30319 = EDGE_LOOP('',(#30320,#30321,#30327,#30328)); +#30320 = ORIENTED_EDGE('',*,*,#20494,.T.); +#30321 = ORIENTED_EDGE('',*,*,#30322,.F.); +#30322 = EDGE_CURVE('',#30141,#20487,#30323,.T.); +#30323 = LINE('',#30324,#30325); +#30324 = CARTESIAN_POINT('',(2.241,0.257330146004,1.607934892496)); +#30325 = VECTOR('',#30326,1.); +#30326 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30327 = ORIENTED_EDGE('',*,*,#30140,.F.); +#30328 = ORIENTED_EDGE('',*,*,#30305,.T.); +#30329 = PLANE('',#30330); +#30330 = AXIS2_PLACEMENT_3D('',#30331,#30332,#30333); +#30331 = CARTESIAN_POINT('',(2.241,0.257330146004,1.607934892496)); +#30332 = DIRECTION('',(9.47038344819E-17,0.936975345944,0.349395479497) + ); +#30333 = DIRECTION('',(-6.469450585799E-34,-0.349395479497, + 0.936975345944)); +#30334 = ADVANCED_FACE('',(#30335),#30341,.F.); +#30335 = FACE_BOUND('',#30336,.T.); +#30336 = EDGE_LOOP('',(#30337,#30338,#30339,#30340)); +#30337 = ORIENTED_EDGE('',*,*,#20486,.T.); +#30338 = ORIENTED_EDGE('',*,*,#30222,.F.); +#30339 = ORIENTED_EDGE('',*,*,#30148,.F.); +#30340 = ORIENTED_EDGE('',*,*,#30322,.T.); +#30341 = PLANE('',#30342); +#30342 = AXIS2_PLACEMENT_3D('',#30343,#30344,#30345); +#30343 = CARTESIAN_POINT('',(2.241,0.271834768936,1.607934892496)); +#30344 = DIRECTION('',(2.710505431214E-16,-1.494974640245E-14,1.)); +#30345 = DIRECTION('',(3.388588453054E-46,-1.,-1.494974640245E-14)); +#30346 = ADVANCED_FACE('',(#30347),#30372,.T.); +#30347 = FACE_BOUND('',#30348,.T.); +#30348 = EDGE_LOOP('',(#30349,#30359,#30365,#30366)); +#30349 = ORIENTED_EDGE('',*,*,#30350,.F.); +#30350 = EDGE_CURVE('',#30351,#30353,#30355,.T.); +#30351 = VERTEX_POINT('',#30352); +#30352 = CARTESIAN_POINT('',(2.24,0.208773451312,1.647237741732)); +#30353 = VERTEX_POINT('',#30354); +#30354 = CARTESIAN_POINT('',(2.24,0.242903504915,1.647237741732)); +#30355 = LINE('',#30356,#30357); +#30356 = CARTESIAN_POINT('',(2.24,0.208773451312,1.647237741732)); +#30357 = VECTOR('',#30358,1.); +#30358 = DIRECTION('',(0.,1.,6.353357572162E-15)); +#30359 = ORIENTED_EDGE('',*,*,#30360,.F.); +#30360 = EDGE_CURVE('',#30157,#30351,#30361,.T.); +#30361 = LINE('',#30362,#30363); +#30362 = CARTESIAN_POINT('',(2.241,0.208773451312,1.647237741732)); +#30363 = VECTOR('',#30364,1.); +#30364 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30365 = ORIENTED_EDGE('',*,*,#30156,.T.); +#30366 = ORIENTED_EDGE('',*,*,#30367,.T.); +#30367 = EDGE_CURVE('',#30159,#30353,#30368,.T.); +#30368 = LINE('',#30369,#30370); +#30369 = CARTESIAN_POINT('',(2.241,0.242903504915,1.647237741732)); +#30370 = VECTOR('',#30371,1.); +#30371 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30372 = PLANE('',#30373); +#30373 = AXIS2_PLACEMENT_3D('',#30374,#30375,#30376); +#30374 = CARTESIAN_POINT('',(2.241,0.208773451312,1.647237741732)); +#30375 = DIRECTION('',(2.710505431214E-16,-6.353357572162E-15,1.)); +#30376 = DIRECTION('',(-3.263242275557E-47,-1.,-6.353357572162E-15)); +#30377 = ADVANCED_FACE('',(#30378),#30396,.T.); +#30378 = FACE_BOUND('',#30379,.T.); +#30379 = EDGE_LOOP('',(#30380,#30388,#30389,#30390)); +#30380 = ORIENTED_EDGE('',*,*,#30381,.F.); +#30381 = EDGE_CURVE('',#30353,#30382,#30384,.T.); +#30382 = VERTEX_POINT('',#30383); +#30383 = CARTESIAN_POINT('',(2.24,0.227541081701,1.689503901031)); +#30384 = LINE('',#30385,#30386); +#30385 = CARTESIAN_POINT('',(2.24,0.242903504915,1.647237741732)); +#30386 = VECTOR('',#30387,1.); +#30387 = DIRECTION('',(0.,-0.34160383069,0.939844041774)); +#30388 = ORIENTED_EDGE('',*,*,#30367,.F.); +#30389 = ORIENTED_EDGE('',*,*,#30200,.T.); +#30390 = ORIENTED_EDGE('',*,*,#30391,.T.); +#30391 = EDGE_CURVE('',#30192,#30382,#30392,.T.); +#30392 = LINE('',#30393,#30394); +#30393 = CARTESIAN_POINT('',(2.241,0.227541081701,1.689503901031)); +#30394 = VECTOR('',#30395,1.); +#30395 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30396 = PLANE('',#30397); +#30397 = AXIS2_PLACEMENT_3D('',#30398,#30399,#30400); +#30398 = CARTESIAN_POINT('',(2.241,0.242903504915,1.647237741732)); +#30399 = DIRECTION('',(-9.259190384093E-17,-0.939844041774, + -0.34160383069)); +#30400 = DIRECTION('',(1.685557244366E-33,0.34160383069,-0.939844041774) + ); +#30401 = ADVANCED_FACE('',(#30402),#30421,.T.); +#30402 = FACE_BOUND('',#30403,.T.); +#30403 = EDGE_LOOP('',(#30404,#30413,#30414,#30415)); +#30404 = ORIENTED_EDGE('',*,*,#30405,.F.); +#30405 = EDGE_CURVE('',#30382,#30406,#30408,.T.); +#30406 = VERTEX_POINT('',#30407); +#30407 = CARTESIAN_POINT('',(2.24,0.225955450879,1.696626242757)); +#30408 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30409,#30410,#30411,#30412), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#30409 = CARTESIAN_POINT('',(2.24,0.227541081701,1.689503901031)); +#30410 = CARTESIAN_POINT('',(2.24,0.227047196691,1.690907574218)); +#30411 = CARTESIAN_POINT('',(2.24,0.226527317732,1.69324702953)); +#30412 = CARTESIAN_POINT('',(2.24,0.225955450879,1.696626242757)); +#30413 = ORIENTED_EDGE('',*,*,#30391,.F.); +#30414 = ORIENTED_EDGE('',*,*,#30191,.T.); +#30415 = ORIENTED_EDGE('',*,*,#30416,.T.); +#30416 = EDGE_CURVE('',#30184,#30406,#30417,.T.); +#30417 = LINE('',#30418,#30419); +#30418 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30419 = VECTOR('',#30420,1.); +#30420 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30421 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30422,#30423) + ,(#30424,#30425) + ,(#30426,#30427) + ,(#30428,#30429 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30422 = CARTESIAN_POINT('',(2.241,0.227541081701,1.689503901031)); +#30423 = CARTESIAN_POINT('',(2.24,0.227541081701,1.689503901031)); +#30424 = CARTESIAN_POINT('',(2.241,0.227047196691,1.690907574218)); +#30425 = CARTESIAN_POINT('',(2.24,0.227047196691,1.690907574218)); +#30426 = CARTESIAN_POINT('',(2.241,0.226527317732,1.69324702953)); +#30427 = CARTESIAN_POINT('',(2.24,0.226527317732,1.69324702953)); +#30428 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30429 = CARTESIAN_POINT('',(2.24,0.225955450879,1.696626242757)); +#30430 = ADVANCED_FACE('',(#30431),#30449,.T.); +#30431 = FACE_BOUND('',#30432,.T.); +#30432 = EDGE_LOOP('',(#30433,#30441,#30442,#30443)); +#30433 = ORIENTED_EDGE('',*,*,#30434,.F.); +#30434 = EDGE_CURVE('',#30406,#30435,#30437,.T.); +#30435 = VERTEX_POINT('',#30436); +#30436 = CARTESIAN_POINT('',(2.24,0.225643523504,1.696626242757)); +#30437 = LINE('',#30438,#30439); +#30438 = CARTESIAN_POINT('',(2.24,0.225955450879,1.696626242757)); +#30439 = VECTOR('',#30440,1.); +#30440 = DIRECTION('',(0.,-1.,0.)); +#30441 = ORIENTED_EDGE('',*,*,#30416,.F.); +#30442 = ORIENTED_EDGE('',*,*,#30183,.T.); +#30443 = ORIENTED_EDGE('',*,*,#30444,.T.); +#30444 = EDGE_CURVE('',#30175,#30435,#30445,.T.); +#30445 = LINE('',#30446,#30447); +#30446 = CARTESIAN_POINT('',(2.241,0.225643523504,1.696626242757)); +#30447 = VECTOR('',#30448,1.); +#30448 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30449 = PLANE('',#30450); +#30450 = AXIS2_PLACEMENT_3D('',#30451,#30452,#30453); +#30451 = CARTESIAN_POINT('',(2.241,0.225955450879,1.696626242757)); +#30452 = DIRECTION('',(-2.710505431214E-16,0.,-1.)); +#30453 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#30454 = ADVANCED_FACE('',(#30455),#30474,.T.); +#30455 = FACE_BOUND('',#30456,.T.); +#30456 = EDGE_LOOP('',(#30457,#30466,#30467,#30468)); +#30457 = ORIENTED_EDGE('',*,*,#30458,.F.); +#30458 = EDGE_CURVE('',#30435,#30459,#30461,.T.); +#30459 = VERTEX_POINT('',#30460); +#30460 = CARTESIAN_POINT('',(2.24,0.223979910837,1.689503901031)); +#30461 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30462,#30463,#30464,#30465), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#30462 = CARTESIAN_POINT('',(2.24,0.225643523504,1.696626242757)); +#30463 = CARTESIAN_POINT('',(2.24,0.225149638493,1.693558956904)); +#30464 = CARTESIAN_POINT('',(2.24,0.224603765588,1.691167513696)); +#30465 = CARTESIAN_POINT('',(2.24,0.223979910837,1.689503901031)); +#30466 = ORIENTED_EDGE('',*,*,#30444,.F.); +#30467 = ORIENTED_EDGE('',*,*,#30174,.T.); +#30468 = ORIENTED_EDGE('',*,*,#30469,.T.); +#30469 = EDGE_CURVE('',#30167,#30459,#30470,.T.); +#30470 = LINE('',#30471,#30472); +#30471 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30472 = VECTOR('',#30473,1.); +#30473 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30474 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30475,#30476) + ,(#30477,#30478) + ,(#30479,#30480) + ,(#30481,#30482 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30475 = CARTESIAN_POINT('',(2.241,0.225643523504,1.696626242757)); +#30476 = CARTESIAN_POINT('',(2.24,0.225643523504,1.696626242757)); +#30477 = CARTESIAN_POINT('',(2.241,0.225149638493,1.693558956904)); +#30478 = CARTESIAN_POINT('',(2.24,0.225149638493,1.693558956904)); +#30479 = CARTESIAN_POINT('',(2.241,0.224603765588,1.691167513696)); +#30480 = CARTESIAN_POINT('',(2.24,0.224603765588,1.691167513696)); +#30481 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30482 = CARTESIAN_POINT('',(2.24,0.223979910837,1.689503901031)); +#30483 = ADVANCED_FACE('',(#30484),#30495,.T.); +#30484 = FACE_BOUND('',#30485,.T.); +#30485 = EDGE_LOOP('',(#30486,#30492,#30493,#30494)); +#30486 = ORIENTED_EDGE('',*,*,#30487,.F.); +#30487 = EDGE_CURVE('',#30459,#30351,#30488,.T.); +#30488 = LINE('',#30489,#30490); +#30489 = CARTESIAN_POINT('',(2.24,0.223979910837,1.689503901031)); +#30490 = VECTOR('',#30491,1.); +#30491 = DIRECTION('',(0.,-0.338535034296,-0.940953787683)); +#30492 = ORIENTED_EDGE('',*,*,#30469,.F.); +#30493 = ORIENTED_EDGE('',*,*,#30166,.T.); +#30494 = ORIENTED_EDGE('',*,*,#30360,.T.); +#30495 = PLANE('',#30496); +#30496 = AXIS2_PLACEMENT_3D('',#30497,#30498,#30499); +#30497 = CARTESIAN_POINT('',(2.241,0.223979910837,1.689503901031)); +#30498 = DIRECTION('',(-9.176010491145E-17,0.940953787683, + -0.338535034296)); +#30499 = DIRECTION('',(1.565728325462E-33,0.338535034296,0.940953787683) + ); +#30500 = ADVANCED_FACE('',(#30501),#30509,.F.); +#30501 = FACE_BOUND('',#30502,.T.); +#30502 = EDGE_LOOP('',(#30503,#30504,#30505,#30506,#30507,#30508)); +#30503 = ORIENTED_EDGE('',*,*,#30487,.T.); +#30504 = ORIENTED_EDGE('',*,*,#30350,.T.); +#30505 = ORIENTED_EDGE('',*,*,#30381,.T.); +#30506 = ORIENTED_EDGE('',*,*,#30405,.T.); +#30507 = ORIENTED_EDGE('',*,*,#30434,.T.); +#30508 = ORIENTED_EDGE('',*,*,#30458,.T.); +#30509 = PLANE('',#30510); +#30510 = AXIS2_PLACEMENT_3D('',#30511,#30512,#30513); +#30511 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#30512 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#30513 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#30514 = ADVANCED_FACE('',(#30515,#30809),#30834,.F.); +#30515 = FACE_BOUND('',#30516,.T.); +#30516 = EDGE_LOOP('',(#30517,#30528,#30537,#30546,#30555,#30564,#30573, + #30582,#30591,#30600,#30609,#30618,#30627,#30636,#30644,#30652, + #30660,#30669,#30678,#30687,#30696,#30705,#30714,#30723,#30732, + #30741,#30750,#30758,#30767,#30776,#30785,#30793,#30802)); +#30517 = ORIENTED_EDGE('',*,*,#30518,.T.); +#30518 = EDGE_CURVE('',#30519,#30521,#30523,.T.); +#30519 = VERTEX_POINT('',#30520); +#30520 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#30521 = VERTEX_POINT('',#30522); +#30522 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30523 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30524,#30525,#30526,#30527), + .UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.),.PIECEWISE_BEZIER_KNOTS.); +#30524 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#30525 = CARTESIAN_POINT('',(2.241,-0.34761831172,1.752180910252)); +#30526 = CARTESIAN_POINT('',(2.241,-0.377261065265,1.790499578546)); +#30527 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30528 = ORIENTED_EDGE('',*,*,#30529,.T.); +#30529 = EDGE_CURVE('',#30521,#30530,#30532,.T.); +#30530 = VERTEX_POINT('',#30531); +#30531 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30532 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30533,#30534,#30535,#30536), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30533 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30534 = CARTESIAN_POINT('',(2.241,-0.426424595968,1.825203265124)); +#30535 = CARTESIAN_POINT('',(2.241,-0.440161485121,1.844724090548)); +#30536 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30537 = ORIENTED_EDGE('',*,*,#30538,.T.); +#30538 = EDGE_CURVE('',#30530,#30539,#30541,.T.); +#30539 = VERTEX_POINT('',#30540); +#30540 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30541 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30542,#30543,#30544,#30545), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#30542 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30543 = CARTESIAN_POINT('',(2.241,-0.484987092925,1.884488742048)); +#30544 = CARTESIAN_POINT('',(2.241,-0.519690779503,1.898225619996)); +#30545 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30546 = ORIENTED_EDGE('',*,*,#30547,.T.); +#30547 = EDGE_CURVE('',#30539,#30548,#30550,.T.); +#30548 = VERTEX_POINT('',#30549); +#30549 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30550 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30551,#30552,#30553,#30554), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#30551 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30552 = CARTESIAN_POINT('',(2.241,-0.587652173761,1.898225619996)); +#30553 = CARTESIAN_POINT('',(2.241,-0.617294913516,1.888103709975)); +#30554 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30555 = ORIENTED_EDGE('',*,*,#30556,.T.); +#30556 = EDGE_CURVE('',#30548,#30557,#30559,.T.); +#30557 = VERTEX_POINT('',#30558); +#30558 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30559 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30560,#30561,#30562,#30563), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#30560 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30561 = CARTESIAN_POINT('',(2.241,-0.654890585467,1.861352944388)); +#30562 = CARTESIAN_POINT('',(2.241,-0.665012492903,1.85050804061)); +#30563 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30564 = ORIENTED_EDGE('',*,*,#30565,.T.); +#30565 = EDGE_CURVE('',#30557,#30566,#30568,.T.); +#30566 = VERTEX_POINT('',#30567); +#30567 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30568 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30569,#30570,#30571,#30572), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#30569 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30570 = CARTESIAN_POINT('',(2.241,-0.680195347162,1.838940147382)); +#30571 = CARTESIAN_POINT('',(2.241,-0.685256307775,1.83966313683)); +#30572 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30573 = ORIENTED_EDGE('',*,*,#30574,.T.); +#30574 = EDGE_CURVE('',#30566,#30575,#30577,.T.); +#30575 = VERTEX_POINT('',#30576); +#30576 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#30577 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30578,#30579,#30580,#30581), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#30578 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30579 = CARTESIAN_POINT('',(2.241,-0.722128976488,1.83966313683)); +#30580 = CARTESIAN_POINT('',(2.241,-0.751771709347,1.82737224726)); +#30581 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#30582 = ORIENTED_EDGE('',*,*,#30583,.T.); +#30583 = EDGE_CURVE('',#30575,#30584,#30586,.T.); +#30584 = VERTEX_POINT('',#30585); +#30585 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#30586 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30587,#30588,#30589,#30590), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#30587 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#30588 = CARTESIAN_POINT('',(2.241,-0.795874339769,1.783269642694)); +#30589 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.753626902939)); +#30590 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#30591 = ORIENTED_EDGE('',*,*,#30592,.T.); +#30592 = EDGE_CURVE('',#30584,#30593,#30595,.T.); +#30593 = VERTEX_POINT('',#30594); +#30594 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#30595 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30596,#30597,#30598,#30599), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#30596 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#30597 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.693618440876)); +#30598 = CARTESIAN_POINT('',(2.241,-0.797320327285,1.665421680018)); +#30599 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#30600 = ORIENTED_EDGE('',*,*,#30601,.T.); +#30601 = EDGE_CURVE('',#30593,#30602,#30604,.T.); +#30602 = VERTEX_POINT('',#30603); +#30603 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#30604 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30605,#30606,#30607,#30608), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#30605 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#30606 = CARTESIAN_POINT('',(2.241,-0.761893644364,1.62638004296)); +#30607 = CARTESIAN_POINT('',(2.241,-0.742372812045,1.614812156628)); +#30608 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#30609 = ORIENTED_EDGE('',*,*,#30610,.T.); +#30610 = EDGE_CURVE('',#30602,#30611,#30613,.T.); +#30611 = VERTEX_POINT('',#30612); +#30612 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#30613 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30614,#30615,#30616,#30617), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#30614 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#30615 = CARTESIAN_POINT('',(2.241,-0.71056109705,1.58010847005)); +#30616 = CARTESIAN_POINT('',(2.241,-0.683087346325,1.559864655178)); +#30617 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#30618 = ORIENTED_EDGE('',*,*,#30619,.T.); +#30619 = EDGE_CURVE('',#30611,#30620,#30622,.T.); +#30620 = VERTEX_POINT('',#30621); +#30621 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#30622 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30623,#30624,#30625,#30626), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#30623 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#30624 = CARTESIAN_POINT('',(2.241,-0.61151097035,1.559864655178)); +#30625 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.592399366516)); +#30626 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#30627 = ORIENTED_EDGE('',*,*,#30628,.T.); +#30628 = EDGE_CURVE('',#30620,#30629,#30631,.T.); +#30629 = VERTEX_POINT('',#30630); +#30630 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.63939394956)); +#30631 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30632,#30633,#30634,#30635), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#30632 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#30633 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.634332988947)); +#30634 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.636501964187)); +#30635 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.63939394956)); +#30636 = ORIENTED_EDGE('',*,*,#30637,.T.); +#30637 = EDGE_CURVE('',#30629,#30638,#30640,.T.); +#30638 = VERTEX_POINT('',#30639); +#30639 = CARTESIAN_POINT('',(2.241,-0.477757157072,1.692895472113)); +#30640 = LINE('',#30641,#30642); +#30641 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.63939394956)); +#30642 = VECTOR('',#30643,1.); +#30643 = DIRECTION('',(0.,0.884094950248,0.467307306755)); +#30644 = ORIENTED_EDGE('',*,*,#30645,.T.); +#30645 = EDGE_CURVE('',#30638,#30646,#30648,.T.); +#30646 = VERTEX_POINT('',#30647); +#30647 = CARTESIAN_POINT('',(2.241,-0.500169947184,1.731214140407)); +#30648 = LINE('',#30649,#30650); +#30649 = CARTESIAN_POINT('',(2.241,-0.477757157072,1.692895472113)); +#30650 = VECTOR('',#30651,1.); +#30651 = DIRECTION('',(0.,-0.50488304865,0.863187758941)); +#30652 = ORIENTED_EDGE('',*,*,#30653,.T.); +#30653 = EDGE_CURVE('',#30646,#30654,#30656,.T.); +#30654 = VERTEX_POINT('',#30655); +#30655 = CARTESIAN_POINT('',(2.241,-0.597051084854,1.680604589437)); +#30656 = LINE('',#30657,#30658); +#30657 = CARTESIAN_POINT('',(2.241,-0.500169947184,1.731214140407)); +#30658 = VECTOR('',#30659,1.); +#30659 = DIRECTION('',(0.,-0.886348842796,-0.463018065387)); +#30660 = ORIENTED_EDGE('',*,*,#30661,.T.); +#30661 = EDGE_CURVE('',#30654,#30662,#30664,.T.); +#30662 = VERTEX_POINT('',#30663); +#30663 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#30664 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30665,#30666,#30667,#30668), + .UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.),.PIECEWISE_BEZIER_KNOTS.); +#30665 = CARTESIAN_POINT('',(2.241,-0.597051084854,1.680604589437)); +#30666 = CARTESIAN_POINT('',(2.241,-0.610064963873,1.695787457486)); +#30667 = CARTESIAN_POINT('',(2.241,-0.629585796192,1.705186368579)); +#30668 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#30669 = ORIENTED_EDGE('',*,*,#30670,.T.); +#30670 = EDGE_CURVE('',#30662,#30671,#30673,.T.); +#30671 = VERTEX_POINT('',#30672); +#30672 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#30673 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30674,#30675,#30676,#30677), + .UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.),.PIECEWISE_BEZIER_KNOTS.); +#30674 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#30675 = CARTESIAN_POINT('',(2.241,-0.682364336192,1.705186368579)); +#30676 = CARTESIAN_POINT('',(2.241,-0.709115090573,1.684942553707)); +#30677 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#30678 = ORIENTED_EDGE('',*,*,#30679,.T.); +#30679 = EDGE_CURVE('',#30671,#30680,#30682,.T.); +#30680 = VERTEX_POINT('',#30681); +#30681 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#30682 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30683,#30684,#30685,#30686), + .UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.),.PIECEWISE_BEZIER_KNOTS.); +#30683 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#30684 = CARTESIAN_POINT('',(2.241,-0.744541773494,1.669036689314)); +#30685 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.694341464799)); +#30686 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#30687 = ORIENTED_EDGE('',*,*,#30688,.T.); +#30688 = EDGE_CURVE('',#30680,#30689,#30691,.T.); +#30689 = VERTEX_POINT('',#30690); +#30690 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#30691 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30692,#30693,#30694,#30695), + .UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.),.PIECEWISE_BEZIER_KNOTS.); +#30692 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#30693 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.763748851745)); +#30694 = CARTESIAN_POINT('',(2.241,-0.730081901789,1.796283563083)); +#30695 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#30696 = ORIENTED_EDGE('',*,*,#30697,.T.); +#30697 = EDGE_CURVE('',#30689,#30698,#30700,.T.); +#30698 = VERTEX_POINT('',#30699); +#30699 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#30700 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30701,#30702,#30703,#30704), + .UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.),.PIECEWISE_BEZIER_KNOTS.); +#30701 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#30702 = CARTESIAN_POINT('',(2.241,-0.676580379235,1.796283563083)); +#30703 = CARTESIAN_POINT('',(2.241,-0.662843503873,1.791945598813)); +#30704 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#30705 = ORIENTED_EDGE('',*,*,#30706,.T.); +#30706 = EDGE_CURVE('',#30698,#30707,#30709,.T.); +#30707 = VERTEX_POINT('',#30708); +#30708 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#30709 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30710,#30711,#30712,#30713), + .UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.),.PIECEWISE_BEZIER_KNOTS.); +#30710 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#30711 = CARTESIAN_POINT('',(2.241,-0.638261738521,1.825926261468)); +#30712 = CARTESIAN_POINT('',(2.241,-0.600666066571,1.854846004879)); +#30713 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#30714 = ORIENTED_EDGE('',*,*,#30715,.T.); +#30715 = EDGE_CURVE('',#30707,#30716,#30718,.T.); +#30716 = VERTEX_POINT('',#30717); +#30717 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#30718 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30719,#30720,#30721,#30722), + .UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.),.PIECEWISE_BEZIER_KNOTS.); +#30719 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#30720 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.854846004879)); +#30721 = CARTESIAN_POINT('',(2.241,-0.45968231744,1.815081357688)); +#30722 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#30723 = ORIENTED_EDGE('',*,*,#30724,.T.); +#30724 = EDGE_CURVE('',#30716,#30725,#30727,.T.); +#30725 = VERTEX_POINT('',#30726); +#30726 = CARTESIAN_POINT('',(2.241,-0.448114431107,1.764471806718)); +#30727 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30728,#30729,#30730,#30731), + .UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.),.PIECEWISE_BEZIER_KNOTS.); +#30728 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#30729 = CARTESIAN_POINT('',(2.241,-0.451729399033,1.764471806718)); +#30730 = CARTESIAN_POINT('',(2.241,-0.450283406347,1.764471806718)); +#30731 = CARTESIAN_POINT('',(2.241,-0.448114431107,1.764471806718)); +#30732 = ORIENTED_EDGE('',*,*,#30733,.T.); +#30733 = EDGE_CURVE('',#30725,#30734,#30736,.T.); +#30734 = VERTEX_POINT('',#30735); +#30735 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#30736 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30737,#30738,#30739,#30740), + .UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.),.PIECEWISE_BEZIER_KNOTS.); +#30737 = CARTESIAN_POINT('',(2.241,-0.448114431107,1.764471806718)); +#30738 = CARTESIAN_POINT('',(2.241,-0.417025712456,1.764471806718)); +#30739 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.739167031233)); +#30740 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#30741 = ORIENTED_EDGE('',*,*,#30742,.T.); +#30742 = EDGE_CURVE('',#30734,#30743,#30745,.T.); +#30743 = VERTEX_POINT('',#30744); +#30744 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#30745 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30746,#30747,#30748,#30749), + .UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.),.PIECEWISE_BEZIER_KNOTS.); +#30746 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#30747 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.678435572827)); +#30748 = CARTESIAN_POINT('',(2.241,-0.414133727083,1.653853793686)); +#30749 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#30750 = ORIENTED_EDGE('',*,*,#30751,.T.); +#30751 = EDGE_CURVE('',#30743,#30752,#30754,.T.); +#30752 = VERTEX_POINT('',#30753); +#30753 = CARTESIAN_POINT('',(2.241,-0.476311191965,1.651684818446)); +#30754 = LINE('',#30755,#30756); +#30755 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#30756 = VECTOR('',#30757,1.); +#30757 = DIRECTION('',(0.,-1.,-6.664894986924E-15)); +#30758 = ORIENTED_EDGE('',*,*,#30759,.T.); +#30759 = EDGE_CURVE('',#30752,#30760,#30762,.T.); +#30760 = VERTEX_POINT('',#30761); +#30761 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#30762 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30763,#30764,#30765,#30766), + .UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.),.PIECEWISE_BEZIER_KNOTS.); +#30763 = CARTESIAN_POINT('',(2.241,-0.476311191965,1.651684818446)); +#30764 = CARTESIAN_POINT('',(2.241,-0.477757184652,1.651684818446)); +#30765 = CARTESIAN_POINT('',(2.241,-0.479203177338,1.652407800999)); +#30766 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#30767 = ORIENTED_EDGE('',*,*,#30768,.T.); +#30768 = EDGE_CURVE('',#30760,#30769,#30771,.T.); +#30769 = VERTEX_POINT('',#30770); +#30770 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#30771 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30772,#30773,#30774,#30775), + .UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.),.PIECEWISE_BEZIER_KNOTS.); +#30772 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#30773 = CARTESIAN_POINT('',(2.241,-0.492940038911,1.652407800999)); +#30774 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.642285879773)); +#30775 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#30776 = ORIENTED_EDGE('',*,*,#30777,.T.); +#30777 = EDGE_CURVE('',#30769,#30778,#30780,.T.); +#30778 = VERTEX_POINT('',#30779); +#30779 = CARTESIAN_POINT('',(2.241,-0.482095107551,1.607582220775)); +#30780 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30781,#30782,#30783,#30784), + .UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.),.PIECEWISE_BEZIER_KNOTS.); +#30781 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#30782 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.618427124554)); +#30783 = CARTESIAN_POINT('',(2.241,-0.493663021464,1.608305203328)); +#30784 = CARTESIAN_POINT('',(2.241,-0.482095107551,1.607582220775)); +#30785 = ORIENTED_EDGE('',*,*,#30786,.T.); +#30786 = EDGE_CURVE('',#30778,#30787,#30789,.T.); +#30787 = VERTEX_POINT('',#30788); +#30788 = CARTESIAN_POINT('',(2.241,-0.439438502567,1.607582220775)); +#30789 = LINE('',#30790,#30791); +#30790 = CARTESIAN_POINT('',(2.241,-0.482095107551,1.607582220775)); +#30791 = VECTOR('',#30792,1.); +#30792 = DIRECTION('',(0.,1.,0.)); +#30793 = ORIENTED_EDGE('',*,*,#30794,.T.); +#30794 = EDGE_CURVE('',#30787,#30795,#30797,.T.); +#30795 = VERTEX_POINT('',#30796); +#30796 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#30797 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30798,#30799,#30800,#30801), + .UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.),.PIECEWISE_BEZIER_KNOTS.); +#30798 = CARTESIAN_POINT('',(2.241,-0.439438502567,1.607582220775)); +#30799 = CARTESIAN_POINT('',(2.241,-0.414133727083,1.609751196015)); +#30800 = CARTESIAN_POINT('',(2.241,-0.390997926837,1.621319109928)); +#30801 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#30802 = ORIENTED_EDGE('',*,*,#30803,.T.); +#30803 = EDGE_CURVE('',#30795,#30519,#30804,.T.); +#30804 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30805,#30806,#30807,#30808), + .UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.),.PIECEWISE_BEZIER_KNOTS.); +#30805 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#30806 = CARTESIAN_POINT('',(2.241,-0.356294240259,1.658914754298)); +#30807 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.68349654723)); +#30808 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#30809 = FACE_BOUND('',#30810,.T.); +#30810 = EDGE_LOOP('',(#30811,#30825)); +#30811 = ORIENTED_EDGE('',*,*,#30812,.F.); +#30812 = EDGE_CURVE('',#30813,#30815,#30817,.T.); +#30813 = VERTEX_POINT('',#30814); +#30814 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#30815 = VERTEX_POINT('',#30816); +#30816 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#30817 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30818,#30819,#30820,#30821, + #30822,#30823,#30824),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0.,1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#30818 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#30819 = CARTESIAN_POINT('',(2.241,-0.636092763282,1.603244215135)); +#30820 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.616258121734)); +#30821 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.631440975993)); +#30822 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.647346840386)); +#30823 = CARTESIAN_POINT('',(2.241,-0.636815745835,1.659637736851)); +#30824 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#30825 = ORIENTED_EDGE('',*,*,#30826,.F.); +#30826 = EDGE_CURVE('',#30815,#30813,#30827,.T.); +#30827 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30828,#30829,#30830,#30831, + #30832,#30833),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#30828 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#30829 = CARTESIAN_POINT('',(2.241,-0.667181481933,1.659637736851)); +#30830 = CARTESIAN_POINT('',(2.241,-0.680195360952,1.647346840386)); +#30831 = CARTESIAN_POINT('',(2.241,-0.680195360952,1.615535111601)); +#30832 = CARTESIAN_POINT('',(2.241,-0.667181481933,1.603244215135)); +#30833 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#30834 = PLANE('',#30835); +#30835 = AXIS2_PLACEMENT_3D('',#30836,#30837,#30838); +#30836 = CARTESIAN_POINT('',(2.241,-0.367500642211,1.767544530835)); +#30837 = DIRECTION('',(-1.,0.,0.)); +#30838 = DIRECTION('',(0.,0.,1.)); +#30839 = ADVANCED_FACE('',(#30840),#30856,.F.); +#30840 = FACE_BOUND('',#30841,.F.); +#30841 = EDGE_LOOP('',(#30842,#30848,#30849,#30855)); +#30842 = ORIENTED_EDGE('',*,*,#30843,.F.); +#30843 = EDGE_CURVE('',#30519,#20543,#30844,.T.); +#30844 = LINE('',#30845,#30846); +#30845 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#30846 = VECTOR('',#30847,1.); +#30847 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30848 = ORIENTED_EDGE('',*,*,#30518,.T.); +#30849 = ORIENTED_EDGE('',*,*,#30850,.T.); +#30850 = EDGE_CURVE('',#30521,#20545,#30851,.T.); +#30851 = LINE('',#30852,#30853); +#30852 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30853 = VECTOR('',#30854,1.); +#30854 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30855 = ORIENTED_EDGE('',*,*,#20542,.F.); +#30856 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30857,#30858) + ,(#30859,#30860) + ,(#30861,#30862) + ,(#30863,#30864 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(35.,36.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30857 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#30858 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.708801322715)); +#30859 = CARTESIAN_POINT('',(2.241,-0.34761831172,1.752180910252)); +#30860 = CARTESIAN_POINT('',(2.24,-0.34761831172,1.752180910252)); +#30861 = CARTESIAN_POINT('',(2.241,-0.377261065265,1.790499578546)); +#30862 = CARTESIAN_POINT('',(2.24,-0.377261065265,1.790499578546)); +#30863 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30864 = CARTESIAN_POINT('',(2.24,-0.418471677562,1.803513457566)); +#30865 = ADVANCED_FACE('',(#30866),#30877,.F.); +#30866 = FACE_BOUND('',#30867,.F.); +#30867 = EDGE_LOOP('',(#30868,#30869,#30870,#30876)); +#30868 = ORIENTED_EDGE('',*,*,#30850,.F.); +#30869 = ORIENTED_EDGE('',*,*,#30529,.T.); +#30870 = ORIENTED_EDGE('',*,*,#30871,.T.); +#30871 = EDGE_CURVE('',#30530,#20819,#30872,.T.); +#30872 = LINE('',#30873,#30874); +#30873 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30874 = VECTOR('',#30875,1.); +#30875 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30876 = ORIENTED_EDGE('',*,*,#20827,.F.); +#30877 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30878,#30879) + ,(#30880,#30881) + ,(#30882,#30883) + ,(#30884,#30885 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30878 = CARTESIAN_POINT('',(2.241,-0.418471677562,1.803513457566)); +#30879 = CARTESIAN_POINT('',(2.24,-0.418471677562,1.803513457566)); +#30880 = CARTESIAN_POINT('',(2.241,-0.426424595968,1.825203265124)); +#30881 = CARTESIAN_POINT('',(2.24,-0.426424595968,1.825203265124)); +#30882 = CARTESIAN_POINT('',(2.241,-0.440161485121,1.844724090548)); +#30883 = CARTESIAN_POINT('',(2.24,-0.440161485121,1.844724090548)); +#30884 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30885 = CARTESIAN_POINT('',(2.24,-0.4575133422,1.860629951492)); +#30886 = ADVANCED_FACE('',(#30887),#30898,.F.); +#30887 = FACE_BOUND('',#30888,.F.); +#30888 = EDGE_LOOP('',(#30889,#30890,#30891,#30897)); +#30889 = ORIENTED_EDGE('',*,*,#30871,.F.); +#30890 = ORIENTED_EDGE('',*,*,#30538,.T.); +#30891 = ORIENTED_EDGE('',*,*,#30892,.T.); +#30892 = EDGE_CURVE('',#30539,#20810,#30893,.T.); +#30893 = LINE('',#30894,#30895); +#30894 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30895 = VECTOR('',#30896,1.); +#30896 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30897 = ORIENTED_EDGE('',*,*,#20818,.F.); +#30898 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30899,#30900) + ,(#30901,#30902) + ,(#30903,#30904) + ,(#30905,#30906 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30899 = CARTESIAN_POINT('',(2.241,-0.4575133422,1.860629951492)); +#30900 = CARTESIAN_POINT('',(2.24,-0.4575133422,1.860629951492)); +#30901 = CARTESIAN_POINT('',(2.241,-0.484987092925,1.884488742048)); +#30902 = CARTESIAN_POINT('',(2.24,-0.484987092925,1.884488742048)); +#30903 = CARTESIAN_POINT('',(2.241,-0.519690779503,1.898225619996)); +#30904 = CARTESIAN_POINT('',(2.24,-0.519690779503,1.898225619996)); +#30905 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30906 = CARTESIAN_POINT('',(2.24,-0.555840458767,1.898225619996)); +#30907 = ADVANCED_FACE('',(#30908),#30919,.F.); +#30908 = FACE_BOUND('',#30909,.F.); +#30909 = EDGE_LOOP('',(#30910,#30911,#30912,#30918)); +#30910 = ORIENTED_EDGE('',*,*,#30892,.F.); +#30911 = ORIENTED_EDGE('',*,*,#30547,.T.); +#30912 = ORIENTED_EDGE('',*,*,#30913,.T.); +#30913 = EDGE_CURVE('',#30548,#20801,#30914,.T.); +#30914 = LINE('',#30915,#30916); +#30915 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30916 = VECTOR('',#30917,1.); +#30917 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30918 = ORIENTED_EDGE('',*,*,#20809,.F.); +#30919 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30920,#30921) + ,(#30922,#30923) + ,(#30924,#30925) + ,(#30926,#30927 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30920 = CARTESIAN_POINT('',(2.241,-0.555840458767,1.898225619996)); +#30921 = CARTESIAN_POINT('',(2.24,-0.555840458767,1.898225619996)); +#30922 = CARTESIAN_POINT('',(2.241,-0.587652173761,1.898225619996)); +#30923 = CARTESIAN_POINT('',(2.24,-0.587652173761,1.898225619996)); +#30924 = CARTESIAN_POINT('',(2.241,-0.617294913516,1.888103709975)); +#30925 = CARTESIAN_POINT('',(2.24,-0.617294913516,1.888103709975)); +#30926 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30927 = CARTESIAN_POINT('',(2.24,-0.642599689001,1.87002886948)); +#30928 = ADVANCED_FACE('',(#30929),#30940,.F.); +#30929 = FACE_BOUND('',#30930,.F.); +#30930 = EDGE_LOOP('',(#30931,#30932,#30933,#30939)); +#30931 = ORIENTED_EDGE('',*,*,#30913,.F.); +#30932 = ORIENTED_EDGE('',*,*,#30556,.T.); +#30933 = ORIENTED_EDGE('',*,*,#30934,.T.); +#30934 = EDGE_CURVE('',#30557,#20792,#30935,.T.); +#30935 = LINE('',#30936,#30937); +#30936 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30937 = VECTOR('',#30938,1.); +#30938 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30939 = ORIENTED_EDGE('',*,*,#20800,.F.); +#30940 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30941,#30942) + ,(#30943,#30944) + ,(#30945,#30946) + ,(#30947,#30948 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30941 = CARTESIAN_POINT('',(2.241,-0.642599689001,1.87002886948)); +#30942 = CARTESIAN_POINT('',(2.24,-0.642599689001,1.87002886948)); +#30943 = CARTESIAN_POINT('',(2.241,-0.654890585467,1.861352944388)); +#30944 = CARTESIAN_POINT('',(2.24,-0.654890585467,1.861352944388)); +#30945 = CARTESIAN_POINT('',(2.241,-0.665012492903,1.85050804061)); +#30946 = CARTESIAN_POINT('',(2.24,-0.665012492903,1.85050804061)); +#30947 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30948 = CARTESIAN_POINT('',(2.24,-0.674411403996,1.838217151039)); +#30949 = ADVANCED_FACE('',(#30950),#30961,.F.); +#30950 = FACE_BOUND('',#30951,.F.); +#30951 = EDGE_LOOP('',(#30952,#30953,#30954,#30960)); +#30952 = ORIENTED_EDGE('',*,*,#30934,.F.); +#30953 = ORIENTED_EDGE('',*,*,#30565,.T.); +#30954 = ORIENTED_EDGE('',*,*,#30955,.T.); +#30955 = EDGE_CURVE('',#30566,#20783,#30956,.T.); +#30956 = LINE('',#30957,#30958); +#30957 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30958 = VECTOR('',#30959,1.); +#30959 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30960 = ORIENTED_EDGE('',*,*,#20791,.F.); +#30961 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30962,#30963) + ,(#30964,#30965) + ,(#30966,#30967) + ,(#30968,#30969 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30962 = CARTESIAN_POINT('',(2.241,-0.674411403996,1.838217151039)); +#30963 = CARTESIAN_POINT('',(2.24,-0.674411403996,1.838217151039)); +#30964 = CARTESIAN_POINT('',(2.241,-0.680195347162,1.838940147382)); +#30965 = CARTESIAN_POINT('',(2.24,-0.680195347162,1.838940147382)); +#30966 = CARTESIAN_POINT('',(2.241,-0.685256307775,1.83966313683)); +#30967 = CARTESIAN_POINT('',(2.24,-0.685256307775,1.83966313683)); +#30968 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30969 = CARTESIAN_POINT('',(2.24,-0.691040250941,1.83966313683)); +#30970 = ADVANCED_FACE('',(#30971),#30982,.F.); +#30971 = FACE_BOUND('',#30972,.F.); +#30972 = EDGE_LOOP('',(#30973,#30974,#30975,#30981)); +#30973 = ORIENTED_EDGE('',*,*,#30955,.F.); +#30974 = ORIENTED_EDGE('',*,*,#30574,.T.); +#30975 = ORIENTED_EDGE('',*,*,#30976,.T.); +#30976 = EDGE_CURVE('',#30575,#20774,#30977,.T.); +#30977 = LINE('',#30978,#30979); +#30978 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#30979 = VECTOR('',#30980,1.); +#30980 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#30981 = ORIENTED_EDGE('',*,*,#20782,.F.); +#30982 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#30983,#30984) + ,(#30985,#30986) + ,(#30987,#30988) + ,(#30989,#30990 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30983 = CARTESIAN_POINT('',(2.241,-0.691040250941,1.83966313683)); +#30984 = CARTESIAN_POINT('',(2.24,-0.691040250941,1.83966313683)); +#30985 = CARTESIAN_POINT('',(2.241,-0.722128976488,1.83966313683)); +#30986 = CARTESIAN_POINT('',(2.24,-0.722128976488,1.83966313683)); +#30987 = CARTESIAN_POINT('',(2.241,-0.751771709347,1.82737224726)); +#30988 = CARTESIAN_POINT('',(2.24,-0.751771709347,1.82737224726)); +#30989 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#30990 = CARTESIAN_POINT('',(2.24,-0.774184513249,1.804959443357)); +#30991 = ADVANCED_FACE('',(#30992),#31003,.F.); +#30992 = FACE_BOUND('',#30993,.F.); +#30993 = EDGE_LOOP('',(#30994,#30995,#30996,#31002)); +#30994 = ORIENTED_EDGE('',*,*,#30976,.F.); +#30995 = ORIENTED_EDGE('',*,*,#30583,.T.); +#30996 = ORIENTED_EDGE('',*,*,#30997,.T.); +#30997 = EDGE_CURVE('',#30584,#20765,#30998,.T.); +#30998 = LINE('',#30999,#31000); +#30999 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#31000 = VECTOR('',#31001,1.); +#31001 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31002 = ORIENTED_EDGE('',*,*,#20773,.F.); +#31003 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31004,#31005) + ,(#31006,#31007) + ,(#31008,#31009) + ,(#31010,#31011 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31004 = CARTESIAN_POINT('',(2.241,-0.774184513249,1.804959443357)); +#31005 = CARTESIAN_POINT('',(2.24,-0.774184513249,1.804959443357)); +#31006 = CARTESIAN_POINT('',(2.241,-0.795874339769,1.783269642694)); +#31007 = CARTESIAN_POINT('',(2.24,-0.795874339769,1.783269642694)); +#31008 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.753626902939)); +#31009 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.753626902939)); +#31010 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#31011 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.722538184288)); +#31012 = ADVANCED_FACE('',(#31013),#31024,.F.); +#31013 = FACE_BOUND('',#31014,.F.); +#31014 = EDGE_LOOP('',(#31015,#31016,#31017,#31023)); +#31015 = ORIENTED_EDGE('',*,*,#30997,.F.); +#31016 = ORIENTED_EDGE('',*,*,#30592,.T.); +#31017 = ORIENTED_EDGE('',*,*,#31018,.T.); +#31018 = EDGE_CURVE('',#30593,#20756,#31019,.T.); +#31019 = LINE('',#31020,#31021); +#31020 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#31021 = VECTOR('',#31022,1.); +#31022 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31023 = ORIENTED_EDGE('',*,*,#20764,.F.); +#31024 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31025,#31026) + ,(#31027,#31028) + ,(#31029,#31030) + ,(#31031,#31032 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31025 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.722538184288)); +#31026 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.722538184288)); +#31027 = CARTESIAN_POINT('',(2.241,-0.808165231064,1.693618440876)); +#31028 = CARTESIAN_POINT('',(2.24,-0.808165231064,1.693618440876)); +#31029 = CARTESIAN_POINT('',(2.241,-0.797320327285,1.665421680018)); +#31030 = CARTESIAN_POINT('',(2.24,-0.797320327285,1.665421680018)); +#31031 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#31032 = CARTESIAN_POINT('',(2.24,-0.77779950186,1.643731900039)); +#31033 = ADVANCED_FACE('',(#31034),#31045,.F.); +#31034 = FACE_BOUND('',#31035,.F.); +#31035 = EDGE_LOOP('',(#31036,#31037,#31038,#31044)); +#31036 = ORIENTED_EDGE('',*,*,#31018,.F.); +#31037 = ORIENTED_EDGE('',*,*,#30601,.T.); +#31038 = ORIENTED_EDGE('',*,*,#31039,.T.); +#31039 = EDGE_CURVE('',#30602,#20747,#31040,.T.); +#31040 = LINE('',#31041,#31042); +#31041 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#31042 = VECTOR('',#31043,1.); +#31043 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31044 = ORIENTED_EDGE('',*,*,#20755,.F.); +#31045 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31046,#31047) + ,(#31048,#31049) + ,(#31050,#31051) + ,(#31052,#31053 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31046 = CARTESIAN_POINT('',(2.241,-0.77779950186,1.643731900039)); +#31047 = CARTESIAN_POINT('',(2.24,-0.77779950186,1.643731900039)); +#31048 = CARTESIAN_POINT('',(2.241,-0.761893644364,1.62638004296)); +#31049 = CARTESIAN_POINT('',(2.24,-0.761893644364,1.62638004296)); +#31050 = CARTESIAN_POINT('',(2.241,-0.742372812045,1.614812156628)); +#31051 = CARTESIAN_POINT('',(2.24,-0.742372812045,1.614812156628)); +#31052 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#31053 = CARTESIAN_POINT('',(2.24,-0.719960015038,1.609028213462)); +#31054 = ADVANCED_FACE('',(#31055),#31066,.F.); +#31055 = FACE_BOUND('',#31056,.F.); +#31056 = EDGE_LOOP('',(#31057,#31058,#31059,#31065)); +#31057 = ORIENTED_EDGE('',*,*,#31039,.F.); +#31058 = ORIENTED_EDGE('',*,*,#30610,.T.); +#31059 = ORIENTED_EDGE('',*,*,#31060,.T.); +#31060 = EDGE_CURVE('',#30611,#20738,#31061,.T.); +#31061 = LINE('',#31062,#31063); +#31062 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#31063 = VECTOR('',#31064,1.); +#31064 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31065 = ORIENTED_EDGE('',*,*,#20746,.F.); +#31066 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31067,#31068) + ,(#31069,#31070) + ,(#31071,#31072) + ,(#31073,#31074 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31067 = CARTESIAN_POINT('',(2.241,-0.719960015038,1.609028213462)); +#31068 = CARTESIAN_POINT('',(2.24,-0.719960015038,1.609028213462)); +#31069 = CARTESIAN_POINT('',(2.241,-0.71056109705,1.58010847005)); +#31070 = CARTESIAN_POINT('',(2.24,-0.71056109705,1.58010847005)); +#31071 = CARTESIAN_POINT('',(2.241,-0.683087346325,1.559864655178)); +#31072 = CARTESIAN_POINT('',(2.24,-0.683087346325,1.559864655178)); +#31073 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#31074 = CARTESIAN_POINT('',(2.24,-0.65127561754,1.559864655178)); +#31075 = ADVANCED_FACE('',(#31076),#31087,.F.); +#31076 = FACE_BOUND('',#31077,.F.); +#31077 = EDGE_LOOP('',(#31078,#31079,#31080,#31086)); +#31078 = ORIENTED_EDGE('',*,*,#31060,.F.); +#31079 = ORIENTED_EDGE('',*,*,#30619,.T.); +#31080 = ORIENTED_EDGE('',*,*,#31081,.T.); +#31081 = EDGE_CURVE('',#30620,#20729,#31082,.T.); +#31082 = LINE('',#31083,#31084); +#31083 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#31084 = VECTOR('',#31085,1.); +#31085 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31086 = ORIENTED_EDGE('',*,*,#20737,.F.); +#31087 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31088,#31089) + ,(#31090,#31091) + ,(#31092,#31093) + ,(#31094,#31095 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31088 = CARTESIAN_POINT('',(2.241,-0.65127561754,1.559864655178)); +#31089 = CARTESIAN_POINT('',(2.24,-0.65127561754,1.559864655178)); +#31090 = CARTESIAN_POINT('',(2.241,-0.61151097035,1.559864655178)); +#31091 = CARTESIAN_POINT('',(2.24,-0.61151097035,1.559864655178)); +#31092 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.592399366516)); +#31093 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.592399366516)); +#31094 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#31095 = CARTESIAN_POINT('',(2.24,-0.578976259012,1.632164013706)); +#31096 = ADVANCED_FACE('',(#31097),#31108,.F.); +#31097 = FACE_BOUND('',#31098,.T.); +#31098 = EDGE_LOOP('',(#31099,#31100,#31106,#31107)); +#31099 = ORIENTED_EDGE('',*,*,#20728,.T.); +#31100 = ORIENTED_EDGE('',*,*,#31101,.F.); +#31101 = EDGE_CURVE('',#30629,#20721,#31102,.T.); +#31102 = LINE('',#31103,#31104); +#31103 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.63939394956)); +#31104 = VECTOR('',#31105,1.); +#31105 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31106 = ORIENTED_EDGE('',*,*,#30628,.F.); +#31107 = ORIENTED_EDGE('',*,*,#31081,.T.); +#31108 = PLANE('',#31109); +#31109 = AXIS2_PLACEMENT_3D('',#31110,#31111,#31112); +#31110 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.632164013706)); +#31111 = DIRECTION('',(0.,-1.,0.)); +#31112 = DIRECTION('',(0.,-0.,-1.)); +#31113 = ADVANCED_FACE('',(#31114),#31125,.F.); +#31114 = FACE_BOUND('',#31115,.T.); +#31115 = EDGE_LOOP('',(#31116,#31117,#31123,#31124)); +#31116 = ORIENTED_EDGE('',*,*,#20720,.T.); +#31117 = ORIENTED_EDGE('',*,*,#31118,.F.); +#31118 = EDGE_CURVE('',#30638,#20713,#31119,.T.); +#31119 = LINE('',#31120,#31121); +#31120 = CARTESIAN_POINT('',(2.241,-0.477757157072,1.692895472113)); +#31121 = VECTOR('',#31122,1.); +#31122 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31123 = ORIENTED_EDGE('',*,*,#30637,.F.); +#31124 = ORIENTED_EDGE('',*,*,#31101,.T.); +#31125 = PLANE('',#31126); +#31126 = AXIS2_PLACEMENT_3D('',#31127,#31128,#31129); +#31127 = CARTESIAN_POINT('',(2.241,-0.578976259012,1.63939394956)); +#31128 = DIRECTION('',(2.396344164356E-16,-0.467307306755,0.884094950248 + )); +#31129 = DIRECTION('',(1.602384389616E-32,-0.884094950248, + -0.467307306755)); +#31130 = ADVANCED_FACE('',(#31131),#31142,.F.); +#31131 = FACE_BOUND('',#31132,.T.); +#31132 = EDGE_LOOP('',(#31133,#31134,#31140,#31141)); +#31133 = ORIENTED_EDGE('',*,*,#20712,.T.); +#31134 = ORIENTED_EDGE('',*,*,#31135,.F.); +#31135 = EDGE_CURVE('',#30646,#20705,#31136,.T.); +#31136 = LINE('',#31137,#31138); +#31137 = CARTESIAN_POINT('',(2.241,-0.500169947184,1.731214140407)); +#31138 = VECTOR('',#31139,1.); +#31139 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31140 = ORIENTED_EDGE('',*,*,#30645,.F.); +#31141 = ORIENTED_EDGE('',*,*,#31118,.T.); +#31142 = PLANE('',#31143); +#31143 = AXIS2_PLACEMENT_3D('',#31144,#31145,#31146); +#31144 = CARTESIAN_POINT('',(2.241,-0.477757157072,1.692895472113)); +#31145 = DIRECTION('',(-1.368488245493E-16,-0.863187758941, + -0.50488304865)); +#31146 = DIRECTION('',(2.172048559526E-32,0.50488304865,-0.863187758941) + ); +#31147 = ADVANCED_FACE('',(#31148),#31159,.F.); +#31148 = FACE_BOUND('',#31149,.T.); +#31149 = EDGE_LOOP('',(#31150,#31151,#31157,#31158)); +#31150 = ORIENTED_EDGE('',*,*,#20704,.T.); +#31151 = ORIENTED_EDGE('',*,*,#31152,.F.); +#31152 = EDGE_CURVE('',#30654,#20696,#31153,.T.); +#31153 = LINE('',#31154,#31155); +#31154 = CARTESIAN_POINT('',(2.241,-0.597051084854,1.680604589437)); +#31155 = VECTOR('',#31156,1.); +#31156 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31157 = ORIENTED_EDGE('',*,*,#30653,.F.); +#31158 = ORIENTED_EDGE('',*,*,#31135,.T.); +#31159 = PLANE('',#31160); +#31160 = AXIS2_PLACEMENT_3D('',#31161,#31162,#31163); +#31161 = CARTESIAN_POINT('',(2.241,-0.500169947184,1.731214140407)); +#31162 = DIRECTION('',(-2.402453352348E-16,0.463018065387, + -0.886348842796)); +#31163 = DIRECTION('',(-2.440059546277E-33,0.886348842796,0.463018065387 + )); +#31164 = ADVANCED_FACE('',(#31165),#31176,.F.); +#31165 = FACE_BOUND('',#31166,.F.); +#31166 = EDGE_LOOP('',(#31167,#31168,#31169,#31175)); +#31167 = ORIENTED_EDGE('',*,*,#31152,.F.); +#31168 = ORIENTED_EDGE('',*,*,#30661,.T.); +#31169 = ORIENTED_EDGE('',*,*,#31170,.T.); +#31170 = EDGE_CURVE('',#30662,#20687,#31171,.T.); +#31171 = LINE('',#31172,#31173); +#31172 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#31173 = VECTOR('',#31174,1.); +#31174 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31175 = ORIENTED_EDGE('',*,*,#20695,.F.); +#31176 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31177,#31178) + ,(#31179,#31180) + ,(#31181,#31182) + ,(#31183,#31184 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31177 = CARTESIAN_POINT('',(2.241,-0.597051084854,1.680604589437)); +#31178 = CARTESIAN_POINT('',(2.24,-0.597051084854,1.680604589437)); +#31179 = CARTESIAN_POINT('',(2.241,-0.610064963873,1.695787457486)); +#31180 = CARTESIAN_POINT('',(2.24,-0.610064963873,1.695787457486)); +#31181 = CARTESIAN_POINT('',(2.241,-0.629585796192,1.705186368579)); +#31182 = CARTESIAN_POINT('',(2.24,-0.629585796192,1.705186368579)); +#31183 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#31184 = CARTESIAN_POINT('',(2.24,-0.65127560375,1.705186368579)); +#31185 = ADVANCED_FACE('',(#31186),#31197,.F.); +#31186 = FACE_BOUND('',#31187,.F.); +#31187 = EDGE_LOOP('',(#31188,#31189,#31190,#31196)); +#31188 = ORIENTED_EDGE('',*,*,#31170,.F.); +#31189 = ORIENTED_EDGE('',*,*,#30670,.T.); +#31190 = ORIENTED_EDGE('',*,*,#31191,.T.); +#31191 = EDGE_CURVE('',#30671,#20678,#31192,.T.); +#31192 = LINE('',#31193,#31194); +#31193 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#31194 = VECTOR('',#31195,1.); +#31195 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31196 = ORIENTED_EDGE('',*,*,#20686,.F.); +#31197 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31198,#31199) + ,(#31200,#31201) + ,(#31202,#31203) + ,(#31204,#31205 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31198 = CARTESIAN_POINT('',(2.241,-0.65127560375,1.705186368579)); +#31199 = CARTESIAN_POINT('',(2.24,-0.65127560375,1.705186368579)); +#31200 = CARTESIAN_POINT('',(2.241,-0.682364336192,1.705186368579)); +#31201 = CARTESIAN_POINT('',(2.24,-0.682364336192,1.705186368579)); +#31202 = CARTESIAN_POINT('',(2.241,-0.709115090573,1.684942553707)); +#31203 = CARTESIAN_POINT('',(2.24,-0.709115090573,1.684942553707)); +#31204 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#31205 = CARTESIAN_POINT('',(2.24,-0.719236998009,1.657468789192)); +#31206 = ADVANCED_FACE('',(#31207),#31218,.F.); +#31207 = FACE_BOUND('',#31208,.F.); +#31208 = EDGE_LOOP('',(#31209,#31210,#31211,#31217)); +#31209 = ORIENTED_EDGE('',*,*,#31191,.F.); +#31210 = ORIENTED_EDGE('',*,*,#30679,.T.); +#31211 = ORIENTED_EDGE('',*,*,#31212,.T.); +#31212 = EDGE_CURVE('',#30680,#20669,#31213,.T.); +#31213 = LINE('',#31214,#31215); +#31214 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#31215 = VECTOR('',#31216,1.); +#31216 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31217 = ORIENTED_EDGE('',*,*,#20677,.F.); +#31218 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31219,#31220) + ,(#31221,#31222) + ,(#31223,#31224) + ,(#31225,#31226 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31219 = CARTESIAN_POINT('',(2.241,-0.719236998009,1.657468789192)); +#31220 = CARTESIAN_POINT('',(2.24,-0.719236998009,1.657468789192)); +#31221 = CARTESIAN_POINT('',(2.241,-0.744541773494,1.669036689314)); +#31222 = CARTESIAN_POINT('',(2.24,-0.744541773494,1.669036689314)); +#31223 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.694341464799)); +#31224 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.694341464799)); +#31225 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#31226 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.723984204554)); +#31227 = ADVANCED_FACE('',(#31228),#31239,.F.); +#31228 = FACE_BOUND('',#31229,.F.); +#31229 = EDGE_LOOP('',(#31230,#31231,#31232,#31238)); +#31230 = ORIENTED_EDGE('',*,*,#31212,.F.); +#31231 = ORIENTED_EDGE('',*,*,#30688,.T.); +#31232 = ORIENTED_EDGE('',*,*,#31233,.T.); +#31233 = EDGE_CURVE('',#30689,#20660,#31234,.T.); +#31234 = LINE('',#31235,#31236); +#31235 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#31236 = VECTOR('',#31237,1.); +#31237 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31238 = ORIENTED_EDGE('',*,*,#20668,.F.); +#31239 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31240,#31241) + ,(#31242,#31243) + ,(#31244,#31245) + ,(#31246,#31247 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31240 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.723984204554)); +#31241 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.723984204554)); +#31242 = CARTESIAN_POINT('',(2.241,-0.762616613127,1.763748851745)); +#31243 = CARTESIAN_POINT('',(2.24,-0.762616613127,1.763748851745)); +#31244 = CARTESIAN_POINT('',(2.241,-0.730081901789,1.796283563083)); +#31245 = CARTESIAN_POINT('',(2.24,-0.730081901789,1.796283563083)); +#31246 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#31247 = CARTESIAN_POINT('',(2.24,-0.690317254598,1.796283563083)); +#31248 = ADVANCED_FACE('',(#31249),#31260,.F.); +#31249 = FACE_BOUND('',#31250,.F.); +#31250 = EDGE_LOOP('',(#31251,#31252,#31253,#31259)); +#31251 = ORIENTED_EDGE('',*,*,#31233,.F.); +#31252 = ORIENTED_EDGE('',*,*,#30697,.T.); +#31253 = ORIENTED_EDGE('',*,*,#31254,.T.); +#31254 = EDGE_CURVE('',#30698,#20651,#31255,.T.); +#31255 = LINE('',#31256,#31257); +#31256 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#31257 = VECTOR('',#31258,1.); +#31258 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31259 = ORIENTED_EDGE('',*,*,#20659,.F.); +#31260 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31261,#31262) + ,(#31263,#31264) + ,(#31265,#31266) + ,(#31267,#31268 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31261 = CARTESIAN_POINT('',(2.241,-0.690317254598,1.796283563083)); +#31262 = CARTESIAN_POINT('',(2.24,-0.690317254598,1.796283563083)); +#31263 = CARTESIAN_POINT('',(2.241,-0.676580379235,1.796283563083)); +#31264 = CARTESIAN_POINT('',(2.24,-0.676580379235,1.796283563083)); +#31265 = CARTESIAN_POINT('',(2.241,-0.662843503873,1.791945598813)); +#31266 = CARTESIAN_POINT('',(2.24,-0.662843503873,1.791945598813)); +#31267 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#31268 = CARTESIAN_POINT('',(2.24,-0.651998600094,1.785438659303)); +#31269 = ADVANCED_FACE('',(#31270),#31281,.F.); +#31270 = FACE_BOUND('',#31271,.F.); +#31271 = EDGE_LOOP('',(#31272,#31273,#31274,#31280)); +#31272 = ORIENTED_EDGE('',*,*,#31254,.F.); +#31273 = ORIENTED_EDGE('',*,*,#30706,.T.); +#31274 = ORIENTED_EDGE('',*,*,#31275,.T.); +#31275 = EDGE_CURVE('',#30707,#20642,#31276,.T.); +#31276 = LINE('',#31277,#31278); +#31277 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#31278 = VECTOR('',#31279,1.); +#31279 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31280 = ORIENTED_EDGE('',*,*,#20650,.F.); +#31281 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31282,#31283) + ,(#31284,#31285) + ,(#31286,#31287) + ,(#31288,#31289 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(20.,21.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31282 = CARTESIAN_POINT('',(2.241,-0.651998600094,1.785438659303)); +#31283 = CARTESIAN_POINT('',(2.24,-0.651998600094,1.785438659303)); +#31284 = CARTESIAN_POINT('',(2.241,-0.638261738521,1.825926261468)); +#31285 = CARTESIAN_POINT('',(2.24,-0.638261738521,1.825926261468)); +#31286 = CARTESIAN_POINT('',(2.241,-0.600666066571,1.854846004879)); +#31287 = CARTESIAN_POINT('',(2.24,-0.600666066571,1.854846004879)); +#31288 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#31289 = CARTESIAN_POINT('',(2.24,-0.555117476213,1.854846004879)); +#31290 = ADVANCED_FACE('',(#31291),#31302,.F.); +#31291 = FACE_BOUND('',#31292,.F.); +#31292 = EDGE_LOOP('',(#31293,#31294,#31295,#31301)); +#31293 = ORIENTED_EDGE('',*,*,#31275,.F.); +#31294 = ORIENTED_EDGE('',*,*,#30715,.T.); +#31295 = ORIENTED_EDGE('',*,*,#31296,.T.); +#31296 = EDGE_CURVE('',#30716,#20633,#31297,.T.); +#31297 = LINE('',#31298,#31299); +#31298 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#31299 = VECTOR('',#31300,1.); +#31300 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31301 = ORIENTED_EDGE('',*,*,#20641,.F.); +#31302 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31303,#31304) + ,(#31305,#31306) + ,(#31307,#31308) + ,(#31309,#31310 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(21.,22.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31303 = CARTESIAN_POINT('',(2.241,-0.555117476213,1.854846004879)); +#31304 = CARTESIAN_POINT('',(2.24,-0.555117476213,1.854846004879)); +#31305 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.854846004879)); +#31306 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.854846004879)); +#31307 = CARTESIAN_POINT('',(2.241,-0.45968231744,1.815081357688)); +#31308 = CARTESIAN_POINT('',(2.24,-0.45968231744,1.815081357688)); +#31309 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#31310 = CARTESIAN_POINT('',(2.24,-0.453898374273,1.764471806718)); +#31311 = ADVANCED_FACE('',(#31312),#31323,.F.); +#31312 = FACE_BOUND('',#31313,.T.); +#31313 = EDGE_LOOP('',(#31314,#31315,#31321,#31322)); +#31314 = ORIENTED_EDGE('',*,*,#20632,.T.); +#31315 = ORIENTED_EDGE('',*,*,#31316,.F.); +#31316 = EDGE_CURVE('',#30725,#20624,#31317,.T.); +#31317 = LINE('',#31318,#31319); +#31318 = CARTESIAN_POINT('',(2.241,-0.448114431107,1.764471806718)); +#31319 = VECTOR('',#31320,1.); +#31320 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31321 = ORIENTED_EDGE('',*,*,#30724,.F.); +#31322 = ORIENTED_EDGE('',*,*,#31296,.T.); +#31323 = PLANE('',#31324); +#31324 = AXIS2_PLACEMENT_3D('',#31325,#31326,#31327); +#31325 = CARTESIAN_POINT('',(2.241,-0.453898374273,1.764471806718)); +#31326 = DIRECTION('',(2.710505431214E-16,-0.,1.)); +#31327 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#31328 = ADVANCED_FACE('',(#31329),#31340,.F.); +#31329 = FACE_BOUND('',#31330,.F.); +#31330 = EDGE_LOOP('',(#31331,#31332,#31333,#31339)); +#31331 = ORIENTED_EDGE('',*,*,#31316,.F.); +#31332 = ORIENTED_EDGE('',*,*,#30733,.T.); +#31333 = ORIENTED_EDGE('',*,*,#31334,.T.); +#31334 = EDGE_CURVE('',#30734,#20615,#31335,.T.); +#31335 = LINE('',#31336,#31337); +#31336 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#31337 = VECTOR('',#31338,1.); +#31338 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31339 = ORIENTED_EDGE('',*,*,#20623,.F.); +#31340 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31341,#31342) + ,(#31343,#31344) + ,(#31345,#31346) + ,(#31347,#31348 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(23.,24.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31341 = CARTESIAN_POINT('',(2.241,-0.448114431107,1.764471806718)); +#31342 = CARTESIAN_POINT('',(2.24,-0.448114431107,1.764471806718)); +#31343 = CARTESIAN_POINT('',(2.241,-0.417025712456,1.764471806718)); +#31344 = CARTESIAN_POINT('',(2.24,-0.417025712456,1.764471806718)); +#31345 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.739167031233)); +#31346 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.739167031233)); +#31347 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#31348 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.708078312582)); +#31349 = ADVANCED_FACE('',(#31350),#31361,.F.); +#31350 = FACE_BOUND('',#31351,.F.); +#31351 = EDGE_LOOP('',(#31352,#31353,#31354,#31360)); +#31352 = ORIENTED_EDGE('',*,*,#31334,.F.); +#31353 = ORIENTED_EDGE('',*,*,#30742,.T.); +#31354 = ORIENTED_EDGE('',*,*,#31355,.T.); +#31355 = EDGE_CURVE('',#30743,#20607,#31356,.T.); +#31356 = LINE('',#31357,#31358); +#31357 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#31358 = VECTOR('',#31359,1.); +#31359 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31360 = ORIENTED_EDGE('',*,*,#20614,.F.); +#31361 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31362,#31363) + ,(#31364,#31365) + ,(#31366,#31367) + ,(#31368,#31369 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(24.,25.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31362 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.708078312582)); +#31363 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.708078312582)); +#31364 = CARTESIAN_POINT('',(2.241,-0.391720936971,1.678435572827)); +#31365 = CARTESIAN_POINT('',(2.24,-0.391720936971,1.678435572827)); +#31366 = CARTESIAN_POINT('',(2.241,-0.414133727083,1.653853793686)); +#31367 = CARTESIAN_POINT('',(2.24,-0.414133727083,1.653853793686)); +#31368 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#31369 = CARTESIAN_POINT('',(2.24,-0.443776480627,1.651684818446)); +#31370 = ADVANCED_FACE('',(#31371),#31382,.F.); +#31371 = FACE_BOUND('',#31372,.T.); +#31372 = EDGE_LOOP('',(#31373,#31374,#31380,#31381)); +#31373 = ORIENTED_EDGE('',*,*,#20606,.T.); +#31374 = ORIENTED_EDGE('',*,*,#31375,.F.); +#31375 = EDGE_CURVE('',#30752,#20598,#31376,.T.); +#31376 = LINE('',#31377,#31378); +#31377 = CARTESIAN_POINT('',(2.241,-0.476311191965,1.651684818446)); +#31378 = VECTOR('',#31379,1.); +#31379 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31380 = ORIENTED_EDGE('',*,*,#30751,.F.); +#31381 = ORIENTED_EDGE('',*,*,#31355,.T.); +#31382 = PLANE('',#31383); +#31383 = AXIS2_PLACEMENT_3D('',#31384,#31385,#31386); +#31384 = CARTESIAN_POINT('',(2.241,-0.443776480627,1.651684818446)); +#31385 = DIRECTION('',(-2.710505431214E-16,6.664894986924E-15,-1.)); +#31386 = DIRECTION('',(8.261619394922E-47,1.,6.664894986924E-15)); +#31387 = ADVANCED_FACE('',(#31388),#31399,.F.); +#31388 = FACE_BOUND('',#31389,.F.); +#31389 = EDGE_LOOP('',(#31390,#31391,#31392,#31398)); +#31390 = ORIENTED_EDGE('',*,*,#31375,.F.); +#31391 = ORIENTED_EDGE('',*,*,#30759,.T.); +#31392 = ORIENTED_EDGE('',*,*,#31393,.T.); +#31393 = EDGE_CURVE('',#30760,#20589,#31394,.T.); +#31394 = LINE('',#31395,#31396); +#31395 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#31396 = VECTOR('',#31397,1.); +#31397 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31398 = ORIENTED_EDGE('',*,*,#20597,.F.); +#31399 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31400,#31401) + ,(#31402,#31403) + ,(#31404,#31405) + ,(#31406,#31407 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(26.,27.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31400 = CARTESIAN_POINT('',(2.241,-0.476311191965,1.651684818446)); +#31401 = CARTESIAN_POINT('',(2.24,-0.476311191965,1.651684818446)); +#31402 = CARTESIAN_POINT('',(2.241,-0.477757184652,1.651684818446)); +#31403 = CARTESIAN_POINT('',(2.24,-0.477757184652,1.651684818446)); +#31404 = CARTESIAN_POINT('',(2.241,-0.479203177338,1.652407800999)); +#31405 = CARTESIAN_POINT('',(2.24,-0.479203177338,1.652407800999)); +#31406 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#31407 = CARTESIAN_POINT('',(2.24,-0.480649142445,1.652407800999)); +#31408 = ADVANCED_FACE('',(#31409),#31420,.F.); +#31409 = FACE_BOUND('',#31410,.F.); +#31410 = EDGE_LOOP('',(#31411,#31412,#31413,#31419)); +#31411 = ORIENTED_EDGE('',*,*,#31393,.F.); +#31412 = ORIENTED_EDGE('',*,*,#30768,.T.); +#31413 = ORIENTED_EDGE('',*,*,#31414,.T.); +#31414 = EDGE_CURVE('',#30769,#20580,#31415,.T.); +#31415 = LINE('',#31416,#31417); +#31416 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#31417 = VECTOR('',#31418,1.); +#31418 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31419 = ORIENTED_EDGE('',*,*,#20588,.F.); +#31420 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31421,#31422) + ,(#31423,#31424) + ,(#31425,#31426) + ,(#31427,#31428 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(27.,28.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31421 = CARTESIAN_POINT('',(2.241,-0.480649142445,1.652407800999)); +#31422 = CARTESIAN_POINT('',(2.24,-0.480649142445,1.652407800999)); +#31423 = CARTESIAN_POINT('',(2.241,-0.492940038911,1.652407800999)); +#31424 = CARTESIAN_POINT('',(2.24,-0.492940038911,1.652407800999)); +#31425 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.642285879773)); +#31426 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.642285879773)); +#31427 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#31428 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.629995010887)); +#31429 = ADVANCED_FACE('',(#31430),#31441,.F.); +#31430 = FACE_BOUND('',#31431,.F.); +#31431 = EDGE_LOOP('',(#31432,#31433,#31434,#31440)); +#31432 = ORIENTED_EDGE('',*,*,#31414,.F.); +#31433 = ORIENTED_EDGE('',*,*,#30777,.T.); +#31434 = ORIENTED_EDGE('',*,*,#31435,.T.); +#31435 = EDGE_CURVE('',#30778,#20572,#31436,.T.); +#31436 = LINE('',#31437,#31438); +#31437 = CARTESIAN_POINT('',(2.241,-0.482095107551,1.607582220775)); +#31438 = VECTOR('',#31439,1.); +#31439 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31440 = ORIENTED_EDGE('',*,*,#20579,.F.); +#31441 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31442,#31443) + ,(#31444,#31445) + ,(#31446,#31447) + ,(#31448,#31449 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(28.,29.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31442 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.629995010887)); +#31443 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.629995010887)); +#31444 = CARTESIAN_POINT('',(2.241,-0.503061932556,1.618427124554)); +#31445 = CARTESIAN_POINT('',(2.24,-0.503061932556,1.618427124554)); +#31446 = CARTESIAN_POINT('',(2.241,-0.493663021464,1.608305203328)); +#31447 = CARTESIAN_POINT('',(2.24,-0.493663021464,1.608305203328)); +#31448 = CARTESIAN_POINT('',(2.241,-0.482095107551,1.607582220775)); +#31449 = CARTESIAN_POINT('',(2.24,-0.482095107551,1.607582220775)); +#31450 = ADVANCED_FACE('',(#31451),#31462,.F.); +#31451 = FACE_BOUND('',#31452,.T.); +#31452 = EDGE_LOOP('',(#31453,#31454,#31460,#31461)); +#31453 = ORIENTED_EDGE('',*,*,#20571,.T.); +#31454 = ORIENTED_EDGE('',*,*,#31455,.F.); +#31455 = EDGE_CURVE('',#30787,#20563,#31456,.T.); +#31456 = LINE('',#31457,#31458); +#31457 = CARTESIAN_POINT('',(2.241,-0.439438502567,1.607582220775)); +#31458 = VECTOR('',#31459,1.); +#31459 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31460 = ORIENTED_EDGE('',*,*,#30786,.F.); +#31461 = ORIENTED_EDGE('',*,*,#31435,.T.); +#31462 = PLANE('',#31463); +#31463 = AXIS2_PLACEMENT_3D('',#31464,#31465,#31466); +#31464 = CARTESIAN_POINT('',(2.241,-0.441607477807,1.607582220775)); +#31465 = DIRECTION('',(2.710505431214E-16,-0.,1.)); +#31466 = DIRECTION('',(1.,0.,-2.710505431214E-16)); +#31467 = ADVANCED_FACE('',(#31468),#31479,.F.); +#31468 = FACE_BOUND('',#31469,.F.); +#31469 = EDGE_LOOP('',(#31470,#31471,#31472,#31478)); +#31470 = ORIENTED_EDGE('',*,*,#31455,.F.); +#31471 = ORIENTED_EDGE('',*,*,#30794,.T.); +#31472 = ORIENTED_EDGE('',*,*,#31473,.T.); +#31473 = EDGE_CURVE('',#30795,#20554,#31474,.T.); +#31474 = LINE('',#31475,#31476); +#31475 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#31476 = VECTOR('',#31477,1.); +#31477 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31478 = ORIENTED_EDGE('',*,*,#20562,.F.); +#31479 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31480,#31481) + ,(#31482,#31483) + ,(#31484,#31485) + ,(#31486,#31487 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(33.,34.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31480 = CARTESIAN_POINT('',(2.241,-0.439438502567,1.607582220775)); +#31481 = CARTESIAN_POINT('',(2.24,-0.439438502567,1.607582220775)); +#31482 = CARTESIAN_POINT('',(2.241,-0.414133727083,1.609751196015)); +#31483 = CARTESIAN_POINT('',(2.24,-0.414133727083,1.609751196015)); +#31484 = CARTESIAN_POINT('',(2.241,-0.390997926837,1.621319109928)); +#31485 = CARTESIAN_POINT('',(2.24,-0.390997926837,1.621319109928)); +#31486 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#31487 = CARTESIAN_POINT('',(2.24,-0.373646097339,1.640116932113)); +#31488 = ADVANCED_FACE('',(#31489),#31495,.F.); +#31489 = FACE_BOUND('',#31490,.F.); +#31490 = EDGE_LOOP('',(#31491,#31492,#31493,#31494)); +#31491 = ORIENTED_EDGE('',*,*,#31473,.F.); +#31492 = ORIENTED_EDGE('',*,*,#30803,.T.); +#31493 = ORIENTED_EDGE('',*,*,#30843,.T.); +#31494 = ORIENTED_EDGE('',*,*,#20553,.F.); +#31495 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31496,#31497) + ,(#31498,#31499) + ,(#31500,#31501) + ,(#31502,#31503 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(34.,35.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31496 = CARTESIAN_POINT('',(2.241,-0.373646097339,1.640116932113)); +#31497 = CARTESIAN_POINT('',(2.24,-0.373646097339,1.640116932113)); +#31498 = CARTESIAN_POINT('',(2.241,-0.356294240259,1.658914754298)); +#31499 = CARTESIAN_POINT('',(2.24,-0.356294240259,1.658914754298)); +#31500 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.68349654723)); +#31501 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.68349654723)); +#31502 = CARTESIAN_POINT('',(2.241,-0.346895329167,1.708801322715)); +#31503 = CARTESIAN_POINT('',(2.24,-0.346895329167,1.708801322715)); +#31504 = ADVANCED_FACE('',(#31505),#31534,.T.); +#31505 = FACE_BOUND('',#31506,.T.); +#31506 = EDGE_LOOP('',(#31507,#31521,#31527,#31528)); +#31507 = ORIENTED_EDGE('',*,*,#31508,.F.); +#31508 = EDGE_CURVE('',#31509,#31511,#31513,.T.); +#31509 = VERTEX_POINT('',#31510); +#31510 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.603244215135)); +#31511 = VERTEX_POINT('',#31512); +#31512 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.659637736851)); +#31513 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#31514,#31515,#31516,#31517, + #31518,#31519,#31520),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0.,1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#31514 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.603244215135)); +#31515 = CARTESIAN_POINT('',(2.24,-0.636092763282,1.603244215135)); +#31516 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.616258121734)); +#31517 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.631440975993)); +#31518 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.647346840386)); +#31519 = CARTESIAN_POINT('',(2.24,-0.636815745835,1.659637736851)); +#31520 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.659637736851)); +#31521 = ORIENTED_EDGE('',*,*,#31522,.F.); +#31522 = EDGE_CURVE('',#30813,#31509,#31523,.T.); +#31523 = LINE('',#31524,#31525); +#31524 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#31525 = VECTOR('',#31526,1.); +#31526 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31527 = ORIENTED_EDGE('',*,*,#30812,.T.); +#31528 = ORIENTED_EDGE('',*,*,#31529,.T.); +#31529 = EDGE_CURVE('',#30815,#31511,#31530,.T.); +#31530 = LINE('',#31531,#31532); +#31531 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#31532 = VECTOR('',#31533,1.); +#31533 = DIRECTION('',(-1.,-0.,2.710505431214E-16)); +#31534 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31535,#31536) + ,(#31537,#31538) + ,(#31539,#31540) + ,(#31541,#31542) + ,(#31543,#31544) + ,(#31545,#31546) + ,(#31547,#31548 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,3,4),(2,2),(0.,1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31535 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#31536 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.603244215135)); +#31537 = CARTESIAN_POINT('',(2.241,-0.636092763282,1.603244215135)); +#31538 = CARTESIAN_POINT('',(2.24,-0.636092763282,1.603244215135)); +#31539 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.616258121734)); +#31540 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.616258121734)); +#31541 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.631440975993)); +#31542 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.631440975993)); +#31543 = CARTESIAN_POINT('',(2.241,-0.623801866816,1.647346840386)); +#31544 = CARTESIAN_POINT('',(2.24,-0.623801866816,1.647346840386)); +#31545 = CARTESIAN_POINT('',(2.241,-0.636815745835,1.659637736851)); +#31546 = CARTESIAN_POINT('',(2.24,-0.636815745835,1.659637736851)); +#31547 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#31548 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.659637736851)); +#31549 = ADVANCED_FACE('',(#31550),#31564,.T.); +#31550 = FACE_BOUND('',#31551,.T.); +#31551 = EDGE_LOOP('',(#31552,#31561,#31562,#31563)); +#31552 = ORIENTED_EDGE('',*,*,#31553,.F.); +#31553 = EDGE_CURVE('',#31511,#31509,#31554,.T.); +#31554 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#31555,#31556,#31557,#31558, + #31559,#31560),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#31555 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.659637736851)); +#31556 = CARTESIAN_POINT('',(2.24,-0.667181481933,1.659637736851)); +#31557 = CARTESIAN_POINT('',(2.24,-0.680195360952,1.647346840386)); +#31558 = CARTESIAN_POINT('',(2.24,-0.680195360952,1.615535111601)); +#31559 = CARTESIAN_POINT('',(2.24,-0.667181481933,1.603244215135)); +#31560 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.603244215135)); +#31561 = ORIENTED_EDGE('',*,*,#31529,.F.); +#31562 = ORIENTED_EDGE('',*,*,#30826,.T.); +#31563 = ORIENTED_EDGE('',*,*,#31522,.T.); +#31564 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#31565,#31566) + ,(#31567,#31568) + ,(#31569,#31570) + ,(#31571,#31572) + ,(#31573,#31574) + ,(#31575,#31576 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,2,4),(2,2),(2.,3.,4.),(0.,1.), + .UNSPECIFIED.); +#31565 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.659637736851)); +#31566 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.659637736851)); +#31567 = CARTESIAN_POINT('',(2.241,-0.667181481933,1.659637736851)); +#31568 = CARTESIAN_POINT('',(2.24,-0.667181481933,1.659637736851)); +#31569 = CARTESIAN_POINT('',(2.241,-0.680195360952,1.647346840386)); +#31570 = CARTESIAN_POINT('',(2.24,-0.680195360952,1.647346840386)); +#31571 = CARTESIAN_POINT('',(2.241,-0.680195360952,1.615535111601)); +#31572 = CARTESIAN_POINT('',(2.24,-0.680195360952,1.615535111601)); +#31573 = CARTESIAN_POINT('',(2.241,-0.667181481933,1.603244215135)); +#31574 = CARTESIAN_POINT('',(2.24,-0.667181481933,1.603244215135)); +#31575 = CARTESIAN_POINT('',(2.241,-0.651998613884,1.603244215135)); +#31576 = CARTESIAN_POINT('',(2.24,-0.651998613884,1.603244215135)); +#31577 = ADVANCED_FACE('',(#31578),#31582,.F.); +#31578 = FACE_BOUND('',#31579,.T.); +#31579 = EDGE_LOOP('',(#31580,#31581)); +#31580 = ORIENTED_EDGE('',*,*,#31553,.T.); +#31581 = ORIENTED_EDGE('',*,*,#31508,.T.); +#31582 = PLANE('',#31583); +#31583 = AXIS2_PLACEMENT_3D('',#31584,#31585,#31586); +#31584 = CARTESIAN_POINT('',(2.24,-1.2,2.55)); +#31585 = DIRECTION('',(-1.,0.,2.710505431214E-16)); +#31586 = DIRECTION('',(2.710505431214E-16,0.,1.)); +#31587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#31591)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#31588,#31589,#31590)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#31588 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#31589 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#31590 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#31591 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#31588, + 'distance_accuracy_value','confusion accuracy'); +#31592 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#31593,#31595); +#31593 = ( REPRESENTATION_RELATIONSHIP('','',#13586,#13563) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#31594) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#31594 = ITEM_DEFINED_TRANSFORMATION('','',#11,#13564); +#31595 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #31596); +#31596 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','=>[0:1:1:12]','',#13558, + #13581,$); +#31597 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#13583)); +#31598 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#31599,#31601); +#31599 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#31600) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#31600 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#31601 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #31602); +#31602 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','SW_MACRO5','',#5,#12150,$ + ); +#31603 = SHAPE_DEFINITION_REPRESENTATION(#31604,#31610); +#31604 = PRODUCT_DEFINITION_SHAPE('','',#31605); +#31605 = PRODUCT_DEFINITION('design','',#31606,#31609); +#31606 = PRODUCT_DEFINITION_FORMATION('','',#31607); +#31607 = PRODUCT('R_0402_1005Metric','R_0402_1005Metric','',(#31608)); +#31608 = PRODUCT_CONTEXT('',#2,'mechanical'); +#31609 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#31610 = SHAPE_REPRESENTATION('',(#11,#31611),#31615); +#31611 = AXIS2_PLACEMENT_3D('',#31612,#31613,#31614); +#31612 = CARTESIAN_POINT('',(0.,0.,0.)); +#31613 = DIRECTION('',(0.,0.,1.)); +#31614 = DIRECTION('',(1.,0.,-0.)); +#31615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#31619)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#31616,#31617,#31618)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#31616 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#31617 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#31618 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#31619 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#31616, + 'distance_accuracy_value','confusion accuracy'); +#31620 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#31621,#31623); +#31621 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#31622) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#31622 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#31623 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #31624); +#31624 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','R_XBEE_RST1','',#5,#31605, + $); +#31625 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#31607)); +#31626 = SHAPE_DEFINITION_REPRESENTATION(#31627,#31633); +#31627 = PRODUCT_DEFINITION_SHAPE('','',#31628); +#31628 = PRODUCT_DEFINITION('design','',#31629,#31632); +#31629 = PRODUCT_DEFINITION_FORMATION('','',#31630); +#31630 = PRODUCT('R_0402_1005Metric','R_0402_1005Metric','',(#31631)); +#31631 = PRODUCT_CONTEXT('',#2,'mechanical'); +#31632 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#31633 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#31634),#32424); +#31634 = MANIFOLD_SOLID_BREP('',#31635); +#31635 = CLOSED_SHELL('',(#31636,#31676,#31759,#31784,#31809,#31876, + #31893,#31910,#31959,#31976,#31993,#32042,#32059,#32128,#32159, + #32183,#32252,#32276,#32293,#32310,#32327,#32344,#32361,#32378, + #32395,#32412)); +#31636 = ADVANCED_FACE('',(#31637),#31671,.F.); +#31637 = FACE_BOUND('',#31638,.F.); +#31638 = EDGE_LOOP('',(#31639,#31649,#31657,#31665)); +#31639 = ORIENTED_EDGE('',*,*,#31640,.F.); +#31640 = EDGE_CURVE('',#31641,#31643,#31645,.T.); +#31641 = VERTEX_POINT('',#31642); +#31642 = CARTESIAN_POINT('',(-0.5,-0.25,3.5E-02)); +#31643 = VERTEX_POINT('',#31644); +#31644 = CARTESIAN_POINT('',(-0.5,-0.25,0.315)); +#31645 = LINE('',#31646,#31647); +#31646 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#31647 = VECTOR('',#31648,1.); +#31648 = DIRECTION('',(0.,0.,1.)); +#31649 = ORIENTED_EDGE('',*,*,#31650,.T.); +#31650 = EDGE_CURVE('',#31641,#31651,#31653,.T.); +#31651 = VERTEX_POINT('',#31652); +#31652 = CARTESIAN_POINT('',(-0.5,0.25,3.5E-02)); +#31653 = LINE('',#31654,#31655); +#31654 = CARTESIAN_POINT('',(-0.5,-0.25,3.5E-02)); +#31655 = VECTOR('',#31656,1.); +#31656 = DIRECTION('',(0.,1.,0.)); +#31657 = ORIENTED_EDGE('',*,*,#31658,.T.); +#31658 = EDGE_CURVE('',#31651,#31659,#31661,.T.); +#31659 = VERTEX_POINT('',#31660); +#31660 = CARTESIAN_POINT('',(-0.5,0.25,0.315)); +#31661 = LINE('',#31662,#31663); +#31662 = CARTESIAN_POINT('',(-0.5,0.25,0.)); +#31663 = VECTOR('',#31664,1.); +#31664 = DIRECTION('',(0.,0.,1.)); +#31665 = ORIENTED_EDGE('',*,*,#31666,.F.); +#31666 = EDGE_CURVE('',#31643,#31659,#31667,.T.); +#31667 = LINE('',#31668,#31669); +#31668 = CARTESIAN_POINT('',(-0.5,-0.25,0.315)); +#31669 = VECTOR('',#31670,1.); +#31670 = DIRECTION('',(0.,1.,0.)); +#31671 = PLANE('',#31672); +#31672 = AXIS2_PLACEMENT_3D('',#31673,#31674,#31675); +#31673 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#31674 = DIRECTION('',(1.,0.,0.)); +#31675 = DIRECTION('',(0.,0.,1.)); +#31676 = ADVANCED_FACE('',(#31677),#31754,.F.); +#31677 = FACE_BOUND('',#31678,.F.); +#31678 = EDGE_LOOP('',(#31679,#31689,#31696,#31697,#31706,#31714,#31723, + #31731,#31739,#31747)); +#31679 = ORIENTED_EDGE('',*,*,#31680,.F.); +#31680 = EDGE_CURVE('',#31681,#31683,#31685,.T.); +#31681 = VERTEX_POINT('',#31682); +#31682 = CARTESIAN_POINT('',(-0.465,-0.25,-2.775557561563E-17)); +#31683 = VERTEX_POINT('',#31684); +#31684 = CARTESIAN_POINT('',(-0.335,-0.25,-2.775557561563E-17)); +#31685 = LINE('',#31686,#31687); +#31686 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#31687 = VECTOR('',#31688,1.); +#31688 = DIRECTION('',(1.,0.,0.)); +#31689 = ORIENTED_EDGE('',*,*,#31690,.F.); +#31690 = EDGE_CURVE('',#31641,#31681,#31691,.T.); +#31691 = CIRCLE('',#31692,3.5E-02); +#31692 = AXIS2_PLACEMENT_3D('',#31693,#31694,#31695); +#31693 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31694 = DIRECTION('',(0.,-1.,0.)); +#31695 = DIRECTION('',(0.,0.,1.)); +#31696 = ORIENTED_EDGE('',*,*,#31640,.T.); +#31697 = ORIENTED_EDGE('',*,*,#31698,.T.); +#31698 = EDGE_CURVE('',#31643,#31699,#31701,.T.); +#31699 = VERTEX_POINT('',#31700); +#31700 = CARTESIAN_POINT('',(-0.465,-0.25,0.35)); +#31701 = CIRCLE('',#31702,3.5E-02); +#31702 = AXIS2_PLACEMENT_3D('',#31703,#31704,#31705); +#31703 = CARTESIAN_POINT('',(-0.465,-0.25,0.315)); +#31704 = DIRECTION('',(0.,1.,0.)); +#31705 = DIRECTION('',(0.,-0.,1.)); +#31706 = ORIENTED_EDGE('',*,*,#31707,.T.); +#31707 = EDGE_CURVE('',#31699,#31708,#31710,.T.); +#31708 = VERTEX_POINT('',#31709); +#31709 = CARTESIAN_POINT('',(-0.335,-0.25,0.35)); +#31710 = LINE('',#31711,#31712); +#31711 = CARTESIAN_POINT('',(-0.5,-0.25,0.35)); +#31712 = VECTOR('',#31713,1.); +#31713 = DIRECTION('',(1.,0.,0.)); +#31714 = ORIENTED_EDGE('',*,*,#31715,.F.); +#31715 = EDGE_CURVE('',#31716,#31708,#31718,.T.); +#31716 = VERTEX_POINT('',#31717); +#31717 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#31718 = CIRCLE('',#31719,3.5E-02); +#31719 = AXIS2_PLACEMENT_3D('',#31720,#31721,#31722); +#31720 = CARTESIAN_POINT('',(-0.335,-0.25,0.315)); +#31721 = DIRECTION('',(0.,-1.,0.)); +#31722 = DIRECTION('',(0.,0.,1.)); +#31723 = ORIENTED_EDGE('',*,*,#31724,.F.); +#31724 = EDGE_CURVE('',#31725,#31716,#31727,.T.); +#31725 = VERTEX_POINT('',#31726); +#31726 = CARTESIAN_POINT('',(-0.465,-0.25,0.315)); +#31727 = LINE('',#31728,#31729); +#31728 = CARTESIAN_POINT('',(-0.465,-0.25,0.315)); +#31729 = VECTOR('',#31730,1.); +#31730 = DIRECTION('',(1.,0.,0.)); +#31731 = ORIENTED_EDGE('',*,*,#31732,.F.); +#31732 = EDGE_CURVE('',#31733,#31725,#31735,.T.); +#31733 = VERTEX_POINT('',#31734); +#31734 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31735 = LINE('',#31736,#31737); +#31736 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31737 = VECTOR('',#31738,1.); +#31738 = DIRECTION('',(0.,0.,1.)); +#31739 = ORIENTED_EDGE('',*,*,#31740,.T.); +#31740 = EDGE_CURVE('',#31733,#31741,#31743,.T.); +#31741 = VERTEX_POINT('',#31742); +#31742 = CARTESIAN_POINT('',(-0.3,-0.25,3.5E-02)); +#31743 = LINE('',#31744,#31745); +#31744 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31745 = VECTOR('',#31746,1.); +#31746 = DIRECTION('',(1.,0.,0.)); +#31747 = ORIENTED_EDGE('',*,*,#31748,.T.); +#31748 = EDGE_CURVE('',#31741,#31683,#31749,.T.); +#31749 = CIRCLE('',#31750,3.5E-02); +#31750 = AXIS2_PLACEMENT_3D('',#31751,#31752,#31753); +#31751 = CARTESIAN_POINT('',(-0.335,-0.25,3.5E-02)); +#31752 = DIRECTION('',(0.,1.,0.)); +#31753 = DIRECTION('',(0.,-0.,1.)); +#31754 = PLANE('',#31755); +#31755 = AXIS2_PLACEMENT_3D('',#31756,#31757,#31758); +#31756 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#31757 = DIRECTION('',(0.,1.,0.)); +#31758 = DIRECTION('',(0.,-0.,1.)); +#31759 = ADVANCED_FACE('',(#31760),#31779,.T.); +#31760 = FACE_BOUND('',#31761,.T.); +#31761 = EDGE_LOOP('',(#31762,#31763,#31772,#31778)); +#31762 = ORIENTED_EDGE('',*,*,#31650,.T.); +#31763 = ORIENTED_EDGE('',*,*,#31764,.T.); +#31764 = EDGE_CURVE('',#31651,#31765,#31767,.T.); +#31765 = VERTEX_POINT('',#31766); +#31766 = CARTESIAN_POINT('',(-0.465,0.25,-2.775557561563E-17)); +#31767 = CIRCLE('',#31768,3.5E-02); +#31768 = AXIS2_PLACEMENT_3D('',#31769,#31770,#31771); +#31769 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#31770 = DIRECTION('',(0.,-1.,0.)); +#31771 = DIRECTION('',(0.,0.,1.)); +#31772 = ORIENTED_EDGE('',*,*,#31773,.F.); +#31773 = EDGE_CURVE('',#31681,#31765,#31774,.T.); +#31774 = LINE('',#31775,#31776); +#31775 = CARTESIAN_POINT('',(-0.465,-0.25,-2.775557561563E-17)); +#31776 = VECTOR('',#31777,1.); +#31777 = DIRECTION('',(0.,1.,0.)); +#31778 = ORIENTED_EDGE('',*,*,#31690,.F.); +#31779 = CYLINDRICAL_SURFACE('',#31780,3.5E-02); +#31780 = AXIS2_PLACEMENT_3D('',#31781,#31782,#31783); +#31781 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31782 = DIRECTION('',(0.,1.,0.)); +#31783 = DIRECTION('',(-1.,0.,0.)); +#31784 = ADVANCED_FACE('',(#31785),#31804,.T.); +#31785 = FACE_BOUND('',#31786,.T.); +#31786 = EDGE_LOOP('',(#31787,#31788,#31796,#31803)); +#31787 = ORIENTED_EDGE('',*,*,#31698,.T.); +#31788 = ORIENTED_EDGE('',*,*,#31789,.T.); +#31789 = EDGE_CURVE('',#31699,#31790,#31792,.T.); +#31790 = VERTEX_POINT('',#31791); +#31791 = CARTESIAN_POINT('',(-0.465,0.25,0.35)); +#31792 = LINE('',#31793,#31794); +#31793 = CARTESIAN_POINT('',(-0.465,-0.25,0.35)); +#31794 = VECTOR('',#31795,1.); +#31795 = DIRECTION('',(0.,1.,0.)); +#31796 = ORIENTED_EDGE('',*,*,#31797,.F.); +#31797 = EDGE_CURVE('',#31659,#31790,#31798,.T.); +#31798 = CIRCLE('',#31799,3.5E-02); +#31799 = AXIS2_PLACEMENT_3D('',#31800,#31801,#31802); +#31800 = CARTESIAN_POINT('',(-0.465,0.25,0.315)); +#31801 = DIRECTION('',(0.,1.,0.)); +#31802 = DIRECTION('',(0.,-0.,1.)); +#31803 = ORIENTED_EDGE('',*,*,#31666,.F.); +#31804 = CYLINDRICAL_SURFACE('',#31805,3.5E-02); +#31805 = AXIS2_PLACEMENT_3D('',#31806,#31807,#31808); +#31806 = CARTESIAN_POINT('',(-0.465,-0.25,0.315)); +#31807 = DIRECTION('',(0.,1.,0.)); +#31808 = DIRECTION('',(-1.,0.,0.)); +#31809 = ADVANCED_FACE('',(#31810),#31871,.T.); +#31810 = FACE_BOUND('',#31811,.T.); +#31811 = EDGE_LOOP('',(#31812,#31820,#31821,#31822,#31823,#31831,#31840, + #31848,#31856,#31864)); +#31812 = ORIENTED_EDGE('',*,*,#31813,.F.); +#31813 = EDGE_CURVE('',#31765,#31814,#31816,.T.); +#31814 = VERTEX_POINT('',#31815); +#31815 = CARTESIAN_POINT('',(-0.335,0.25,-2.775557561563E-17)); +#31816 = LINE('',#31817,#31818); +#31817 = CARTESIAN_POINT('',(-0.5,0.25,0.)); +#31818 = VECTOR('',#31819,1.); +#31819 = DIRECTION('',(1.,0.,0.)); +#31820 = ORIENTED_EDGE('',*,*,#31764,.F.); +#31821 = ORIENTED_EDGE('',*,*,#31658,.T.); +#31822 = ORIENTED_EDGE('',*,*,#31797,.T.); +#31823 = ORIENTED_EDGE('',*,*,#31824,.T.); +#31824 = EDGE_CURVE('',#31790,#31825,#31827,.T.); +#31825 = VERTEX_POINT('',#31826); +#31826 = CARTESIAN_POINT('',(-0.335,0.25,0.35)); +#31827 = LINE('',#31828,#31829); +#31828 = CARTESIAN_POINT('',(-0.5,0.25,0.35)); +#31829 = VECTOR('',#31830,1.); +#31830 = DIRECTION('',(1.,0.,0.)); +#31831 = ORIENTED_EDGE('',*,*,#31832,.F.); +#31832 = EDGE_CURVE('',#31833,#31825,#31835,.T.); +#31833 = VERTEX_POINT('',#31834); +#31834 = CARTESIAN_POINT('',(-0.3,0.25,0.315)); +#31835 = CIRCLE('',#31836,3.5E-02); +#31836 = AXIS2_PLACEMENT_3D('',#31837,#31838,#31839); +#31837 = CARTESIAN_POINT('',(-0.335,0.25,0.315)); +#31838 = DIRECTION('',(0.,-1.,0.)); +#31839 = DIRECTION('',(0.,0.,1.)); +#31840 = ORIENTED_EDGE('',*,*,#31841,.F.); +#31841 = EDGE_CURVE('',#31842,#31833,#31844,.T.); +#31842 = VERTEX_POINT('',#31843); +#31843 = CARTESIAN_POINT('',(-0.465,0.25,0.315)); +#31844 = LINE('',#31845,#31846); +#31845 = CARTESIAN_POINT('',(-0.465,0.25,0.315)); +#31846 = VECTOR('',#31847,1.); +#31847 = DIRECTION('',(1.,0.,0.)); +#31848 = ORIENTED_EDGE('',*,*,#31849,.F.); +#31849 = EDGE_CURVE('',#31850,#31842,#31852,.T.); +#31850 = VERTEX_POINT('',#31851); +#31851 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#31852 = LINE('',#31853,#31854); +#31853 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#31854 = VECTOR('',#31855,1.); +#31855 = DIRECTION('',(0.,0.,1.)); +#31856 = ORIENTED_EDGE('',*,*,#31857,.T.); +#31857 = EDGE_CURVE('',#31850,#31858,#31860,.T.); +#31858 = VERTEX_POINT('',#31859); +#31859 = CARTESIAN_POINT('',(-0.3,0.25,3.5E-02)); +#31860 = LINE('',#31861,#31862); +#31861 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#31862 = VECTOR('',#31863,1.); +#31863 = DIRECTION('',(1.,0.,0.)); +#31864 = ORIENTED_EDGE('',*,*,#31865,.T.); +#31865 = EDGE_CURVE('',#31858,#31814,#31866,.T.); +#31866 = CIRCLE('',#31867,3.5E-02); +#31867 = AXIS2_PLACEMENT_3D('',#31868,#31869,#31870); +#31868 = CARTESIAN_POINT('',(-0.335,0.25,3.5E-02)); +#31869 = DIRECTION('',(0.,1.,0.)); +#31870 = DIRECTION('',(0.,-0.,1.)); +#31871 = PLANE('',#31872); +#31872 = AXIS2_PLACEMENT_3D('',#31873,#31874,#31875); +#31873 = CARTESIAN_POINT('',(-0.5,0.25,0.)); +#31874 = DIRECTION('',(0.,1.,0.)); +#31875 = DIRECTION('',(0.,-0.,1.)); +#31876 = ADVANCED_FACE('',(#31877),#31888,.F.); +#31877 = FACE_BOUND('',#31878,.F.); +#31878 = EDGE_LOOP('',(#31879,#31880,#31881,#31882)); +#31879 = ORIENTED_EDGE('',*,*,#31813,.F.); +#31880 = ORIENTED_EDGE('',*,*,#31773,.F.); +#31881 = ORIENTED_EDGE('',*,*,#31680,.T.); +#31882 = ORIENTED_EDGE('',*,*,#31883,.T.); +#31883 = EDGE_CURVE('',#31683,#31814,#31884,.T.); +#31884 = LINE('',#31885,#31886); +#31885 = CARTESIAN_POINT('',(-0.335,-0.25,-2.775557561563E-17)); +#31886 = VECTOR('',#31887,1.); +#31887 = DIRECTION('',(0.,1.,0.)); +#31888 = PLANE('',#31889); +#31889 = AXIS2_PLACEMENT_3D('',#31890,#31891,#31892); +#31890 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#31891 = DIRECTION('',(0.,0.,1.)); +#31892 = DIRECTION('',(1.,0.,-0.)); +#31893 = ADVANCED_FACE('',(#31894),#31905,.T.); +#31894 = FACE_BOUND('',#31895,.T.); +#31895 = EDGE_LOOP('',(#31896,#31897,#31898,#31899)); +#31896 = ORIENTED_EDGE('',*,*,#31748,.T.); +#31897 = ORIENTED_EDGE('',*,*,#31883,.T.); +#31898 = ORIENTED_EDGE('',*,*,#31865,.F.); +#31899 = ORIENTED_EDGE('',*,*,#31900,.F.); +#31900 = EDGE_CURVE('',#31741,#31858,#31901,.T.); +#31901 = LINE('',#31902,#31903); +#31902 = CARTESIAN_POINT('',(-0.3,-0.25,3.5E-02)); +#31903 = VECTOR('',#31904,1.); +#31904 = DIRECTION('',(0.,1.,0.)); +#31905 = CYLINDRICAL_SURFACE('',#31906,3.5E-02); +#31906 = AXIS2_PLACEMENT_3D('',#31907,#31908,#31909); +#31907 = CARTESIAN_POINT('',(-0.335,-0.25,3.5E-02)); +#31908 = DIRECTION('',(0.,1.,0.)); +#31909 = DIRECTION('',(1.,0.,0.)); +#31910 = ADVANCED_FACE('',(#31911),#31954,.F.); +#31911 = FACE_BOUND('',#31912,.F.); +#31912 = EDGE_LOOP('',(#31913,#31914,#31915,#31916,#31924,#31932,#31940, + #31948)); +#31913 = ORIENTED_EDGE('',*,*,#31740,.F.); +#31914 = ORIENTED_EDGE('',*,*,#31732,.T.); +#31915 = ORIENTED_EDGE('',*,*,#31724,.T.); +#31916 = ORIENTED_EDGE('',*,*,#31917,.T.); +#31917 = EDGE_CURVE('',#31716,#31918,#31920,.T.); +#31918 = VERTEX_POINT('',#31919); +#31919 = CARTESIAN_POINT('',(0.3,-0.25,0.315)); +#31920 = LINE('',#31921,#31922); +#31921 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#31922 = VECTOR('',#31923,1.); +#31923 = DIRECTION('',(1.,0.,0.)); +#31924 = ORIENTED_EDGE('',*,*,#31925,.T.); +#31925 = EDGE_CURVE('',#31918,#31926,#31928,.T.); +#31926 = VERTEX_POINT('',#31927); +#31927 = CARTESIAN_POINT('',(0.465,-0.25,0.315)); +#31928 = LINE('',#31929,#31930); +#31929 = CARTESIAN_POINT('',(-0.465,-0.25,0.315)); +#31930 = VECTOR('',#31931,1.); +#31931 = DIRECTION('',(1.,0.,0.)); +#31932 = ORIENTED_EDGE('',*,*,#31933,.F.); +#31933 = EDGE_CURVE('',#31934,#31926,#31936,.T.); +#31934 = VERTEX_POINT('',#31935); +#31935 = CARTESIAN_POINT('',(0.465,-0.25,3.5E-02)); +#31936 = LINE('',#31937,#31938); +#31937 = CARTESIAN_POINT('',(0.465,-0.25,3.5E-02)); +#31938 = VECTOR('',#31939,1.); +#31939 = DIRECTION('',(0.,0.,1.)); +#31940 = ORIENTED_EDGE('',*,*,#31941,.F.); +#31941 = EDGE_CURVE('',#31942,#31934,#31944,.T.); +#31942 = VERTEX_POINT('',#31943); +#31943 = CARTESIAN_POINT('',(0.3,-0.25,3.5E-02)); +#31944 = LINE('',#31945,#31946); +#31945 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31946 = VECTOR('',#31947,1.); +#31947 = DIRECTION('',(1.,0.,0.)); +#31948 = ORIENTED_EDGE('',*,*,#31949,.F.); +#31949 = EDGE_CURVE('',#31741,#31942,#31950,.T.); +#31950 = LINE('',#31951,#31952); +#31951 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31952 = VECTOR('',#31953,1.); +#31953 = DIRECTION('',(1.,0.,0.)); +#31954 = PLANE('',#31955); +#31955 = AXIS2_PLACEMENT_3D('',#31956,#31957,#31958); +#31956 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#31957 = DIRECTION('',(0.,1.,0.)); +#31958 = DIRECTION('',(0.,-0.,1.)); +#31959 = ADVANCED_FACE('',(#31960),#31971,.T.); +#31960 = FACE_BOUND('',#31961,.T.); +#31961 = EDGE_LOOP('',(#31962,#31963,#31964,#31965)); +#31962 = ORIENTED_EDGE('',*,*,#31824,.F.); +#31963 = ORIENTED_EDGE('',*,*,#31789,.F.); +#31964 = ORIENTED_EDGE('',*,*,#31707,.T.); +#31965 = ORIENTED_EDGE('',*,*,#31966,.T.); +#31966 = EDGE_CURVE('',#31708,#31825,#31967,.T.); +#31967 = LINE('',#31968,#31969); +#31968 = CARTESIAN_POINT('',(-0.335,-0.25,0.35)); +#31969 = VECTOR('',#31970,1.); +#31970 = DIRECTION('',(0.,1.,0.)); +#31971 = PLANE('',#31972); +#31972 = AXIS2_PLACEMENT_3D('',#31973,#31974,#31975); +#31973 = CARTESIAN_POINT('',(-0.5,-0.25,0.35)); +#31974 = DIRECTION('',(0.,0.,1.)); +#31975 = DIRECTION('',(1.,0.,-0.)); +#31976 = ADVANCED_FACE('',(#31977),#31988,.T.); +#31977 = FACE_BOUND('',#31978,.T.); +#31978 = EDGE_LOOP('',(#31979,#31985,#31986,#31987)); +#31979 = ORIENTED_EDGE('',*,*,#31980,.T.); +#31980 = EDGE_CURVE('',#31716,#31833,#31981,.T.); +#31981 = LINE('',#31982,#31983); +#31982 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#31983 = VECTOR('',#31984,1.); +#31984 = DIRECTION('',(0.,1.,0.)); +#31985 = ORIENTED_EDGE('',*,*,#31832,.T.); +#31986 = ORIENTED_EDGE('',*,*,#31966,.F.); +#31987 = ORIENTED_EDGE('',*,*,#31715,.F.); +#31988 = CYLINDRICAL_SURFACE('',#31989,3.5E-02); +#31989 = AXIS2_PLACEMENT_3D('',#31990,#31991,#31992); +#31990 = CARTESIAN_POINT('',(-0.335,-0.25,0.315)); +#31991 = DIRECTION('',(0.,1.,0.)); +#31992 = DIRECTION('',(1.,0.,0.)); +#31993 = ADVANCED_FACE('',(#31994),#32037,.T.); +#31994 = FACE_BOUND('',#31995,.T.); +#31995 = EDGE_LOOP('',(#31996,#31997,#31998,#31999,#32007,#32015,#32023, + #32031)); +#31996 = ORIENTED_EDGE('',*,*,#31857,.F.); +#31997 = ORIENTED_EDGE('',*,*,#31849,.T.); +#31998 = ORIENTED_EDGE('',*,*,#31841,.T.); +#31999 = ORIENTED_EDGE('',*,*,#32000,.T.); +#32000 = EDGE_CURVE('',#31833,#32001,#32003,.T.); +#32001 = VERTEX_POINT('',#32002); +#32002 = CARTESIAN_POINT('',(0.3,0.25,0.315)); +#32003 = LINE('',#32004,#32005); +#32004 = CARTESIAN_POINT('',(-0.3,0.25,0.315)); +#32005 = VECTOR('',#32006,1.); +#32006 = DIRECTION('',(1.,0.,0.)); +#32007 = ORIENTED_EDGE('',*,*,#32008,.T.); +#32008 = EDGE_CURVE('',#32001,#32009,#32011,.T.); +#32009 = VERTEX_POINT('',#32010); +#32010 = CARTESIAN_POINT('',(0.465,0.25,0.315)); +#32011 = LINE('',#32012,#32013); +#32012 = CARTESIAN_POINT('',(-0.465,0.25,0.315)); +#32013 = VECTOR('',#32014,1.); +#32014 = DIRECTION('',(1.,0.,0.)); +#32015 = ORIENTED_EDGE('',*,*,#32016,.F.); +#32016 = EDGE_CURVE('',#32017,#32009,#32019,.T.); +#32017 = VERTEX_POINT('',#32018); +#32018 = CARTESIAN_POINT('',(0.465,0.25,3.5E-02)); +#32019 = LINE('',#32020,#32021); +#32020 = CARTESIAN_POINT('',(0.465,0.25,3.5E-02)); +#32021 = VECTOR('',#32022,1.); +#32022 = DIRECTION('',(0.,0.,1.)); +#32023 = ORIENTED_EDGE('',*,*,#32024,.F.); +#32024 = EDGE_CURVE('',#32025,#32017,#32027,.T.); +#32025 = VERTEX_POINT('',#32026); +#32026 = CARTESIAN_POINT('',(0.3,0.25,3.5E-02)); +#32027 = LINE('',#32028,#32029); +#32028 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#32029 = VECTOR('',#32030,1.); +#32030 = DIRECTION('',(1.,0.,0.)); +#32031 = ORIENTED_EDGE('',*,*,#32032,.F.); +#32032 = EDGE_CURVE('',#31858,#32025,#32033,.T.); +#32033 = LINE('',#32034,#32035); +#32034 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#32035 = VECTOR('',#32036,1.); +#32036 = DIRECTION('',(1.,0.,0.)); +#32037 = PLANE('',#32038); +#32038 = AXIS2_PLACEMENT_3D('',#32039,#32040,#32041); +#32039 = CARTESIAN_POINT('',(-0.465,0.25,3.5E-02)); +#32040 = DIRECTION('',(0.,1.,0.)); +#32041 = DIRECTION('',(0.,-0.,1.)); +#32042 = ADVANCED_FACE('',(#32043),#32054,.F.); +#32043 = FACE_BOUND('',#32044,.F.); +#32044 = EDGE_LOOP('',(#32045,#32046,#32047,#32053)); +#32045 = ORIENTED_EDGE('',*,*,#31900,.F.); +#32046 = ORIENTED_EDGE('',*,*,#31949,.T.); +#32047 = ORIENTED_EDGE('',*,*,#32048,.T.); +#32048 = EDGE_CURVE('',#31942,#32025,#32049,.T.); +#32049 = LINE('',#32050,#32051); +#32050 = CARTESIAN_POINT('',(0.3,-0.25,3.5E-02)); +#32051 = VECTOR('',#32052,1.); +#32052 = DIRECTION('',(0.,1.,0.)); +#32053 = ORIENTED_EDGE('',*,*,#32032,.F.); +#32054 = PLANE('',#32055); +#32055 = AXIS2_PLACEMENT_3D('',#32056,#32057,#32058); +#32056 = CARTESIAN_POINT('',(-0.465,-0.25,3.5E-02)); +#32057 = DIRECTION('',(0.,0.,1.)); +#32058 = DIRECTION('',(1.,0.,-0.)); +#32059 = ADVANCED_FACE('',(#32060),#32123,.F.); +#32060 = FACE_BOUND('',#32061,.F.); +#32061 = EDGE_LOOP('',(#32062,#32072,#32079,#32080,#32081,#32082,#32091, + #32099,#32108,#32116)); +#32062 = ORIENTED_EDGE('',*,*,#32063,.F.); +#32063 = EDGE_CURVE('',#32064,#32066,#32068,.T.); +#32064 = VERTEX_POINT('',#32065); +#32065 = CARTESIAN_POINT('',(0.335,-0.25,-2.775557561563E-17)); +#32066 = VERTEX_POINT('',#32067); +#32067 = CARTESIAN_POINT('',(0.465,-0.25,-2.775557561563E-17)); +#32068 = LINE('',#32069,#32070); +#32069 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#32070 = VECTOR('',#32071,1.); +#32071 = DIRECTION('',(1.,0.,0.)); +#32072 = ORIENTED_EDGE('',*,*,#32073,.F.); +#32073 = EDGE_CURVE('',#31942,#32064,#32074,.T.); +#32074 = CIRCLE('',#32075,3.5E-02); +#32075 = AXIS2_PLACEMENT_3D('',#32076,#32077,#32078); +#32076 = CARTESIAN_POINT('',(0.335,-0.25,3.5E-02)); +#32077 = DIRECTION('',(0.,-1.,0.)); +#32078 = DIRECTION('',(0.,0.,1.)); +#32079 = ORIENTED_EDGE('',*,*,#31941,.T.); +#32080 = ORIENTED_EDGE('',*,*,#31933,.T.); +#32081 = ORIENTED_EDGE('',*,*,#31925,.F.); +#32082 = ORIENTED_EDGE('',*,*,#32083,.T.); +#32083 = EDGE_CURVE('',#31918,#32084,#32086,.T.); +#32084 = VERTEX_POINT('',#32085); +#32085 = CARTESIAN_POINT('',(0.335,-0.25,0.35)); +#32086 = CIRCLE('',#32087,3.5E-02); +#32087 = AXIS2_PLACEMENT_3D('',#32088,#32089,#32090); +#32088 = CARTESIAN_POINT('',(0.335,-0.25,0.315)); +#32089 = DIRECTION('',(0.,1.,0.)); +#32090 = DIRECTION('',(0.,-0.,1.)); +#32091 = ORIENTED_EDGE('',*,*,#32092,.T.); +#32092 = EDGE_CURVE('',#32084,#32093,#32095,.T.); +#32093 = VERTEX_POINT('',#32094); +#32094 = CARTESIAN_POINT('',(0.465,-0.25,0.35)); +#32095 = LINE('',#32096,#32097); +#32096 = CARTESIAN_POINT('',(0.3,-0.25,0.35)); +#32097 = VECTOR('',#32098,1.); +#32098 = DIRECTION('',(1.,0.,0.)); +#32099 = ORIENTED_EDGE('',*,*,#32100,.F.); +#32100 = EDGE_CURVE('',#32101,#32093,#32103,.T.); +#32101 = VERTEX_POINT('',#32102); +#32102 = CARTESIAN_POINT('',(0.5,-0.25,0.315)); +#32103 = CIRCLE('',#32104,3.5E-02); +#32104 = AXIS2_PLACEMENT_3D('',#32105,#32106,#32107); +#32105 = CARTESIAN_POINT('',(0.465,-0.25,0.315)); +#32106 = DIRECTION('',(0.,-1.,0.)); +#32107 = DIRECTION('',(0.,0.,1.)); +#32108 = ORIENTED_EDGE('',*,*,#32109,.F.); +#32109 = EDGE_CURVE('',#32110,#32101,#32112,.T.); +#32110 = VERTEX_POINT('',#32111); +#32111 = CARTESIAN_POINT('',(0.5,-0.25,3.5E-02)); +#32112 = LINE('',#32113,#32114); +#32113 = CARTESIAN_POINT('',(0.5,-0.25,0.)); +#32114 = VECTOR('',#32115,1.); +#32115 = DIRECTION('',(0.,0.,1.)); +#32116 = ORIENTED_EDGE('',*,*,#32117,.T.); +#32117 = EDGE_CURVE('',#32110,#32066,#32118,.T.); +#32118 = CIRCLE('',#32119,3.5E-02); +#32119 = AXIS2_PLACEMENT_3D('',#32120,#32121,#32122); +#32120 = CARTESIAN_POINT('',(0.465,-0.25,3.5E-02)); +#32121 = DIRECTION('',(0.,1.,0.)); +#32122 = DIRECTION('',(0.,-0.,1.)); +#32123 = PLANE('',#32124); +#32124 = AXIS2_PLACEMENT_3D('',#32125,#32126,#32127); +#32125 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#32126 = DIRECTION('',(0.,1.,0.)); +#32127 = DIRECTION('',(0.,-0.,1.)); +#32128 = ADVANCED_FACE('',(#32129),#32154,.F.); +#32129 = FACE_BOUND('',#32130,.F.); +#32130 = EDGE_LOOP('',(#32131,#32132,#32140,#32148)); +#32131 = ORIENTED_EDGE('',*,*,#31917,.F.); +#32132 = ORIENTED_EDGE('',*,*,#32133,.T.); +#32133 = EDGE_CURVE('',#31716,#32134,#32136,.T.); +#32134 = VERTEX_POINT('',#32135); +#32135 = CARTESIAN_POINT('',(-0.3,-0.25,0.35)); +#32136 = LINE('',#32137,#32138); +#32137 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#32138 = VECTOR('',#32139,1.); +#32139 = DIRECTION('',(0.,0.,1.)); +#32140 = ORIENTED_EDGE('',*,*,#32141,.T.); +#32141 = EDGE_CURVE('',#32134,#32142,#32144,.T.); +#32142 = VERTEX_POINT('',#32143); +#32143 = CARTESIAN_POINT('',(0.3,-0.25,0.35)); +#32144 = LINE('',#32145,#32146); +#32145 = CARTESIAN_POINT('',(-0.3,-0.25,0.35)); +#32146 = VECTOR('',#32147,1.); +#32147 = DIRECTION('',(1.,0.,0.)); +#32148 = ORIENTED_EDGE('',*,*,#32149,.F.); +#32149 = EDGE_CURVE('',#31918,#32142,#32150,.T.); +#32150 = LINE('',#32151,#32152); +#32151 = CARTESIAN_POINT('',(0.3,-0.25,0.315)); +#32152 = VECTOR('',#32153,1.); +#32153 = DIRECTION('',(0.,0.,1.)); +#32154 = PLANE('',#32155); +#32155 = AXIS2_PLACEMENT_3D('',#32156,#32157,#32158); +#32156 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#32157 = DIRECTION('',(0.,1.,0.)); +#32158 = DIRECTION('',(0.,-0.,1.)); +#32159 = ADVANCED_FACE('',(#32160),#32178,.F.); +#32160 = FACE_BOUND('',#32161,.F.); +#32161 = EDGE_LOOP('',(#32162,#32163,#32164,#32172)); +#32162 = ORIENTED_EDGE('',*,*,#32133,.F.); +#32163 = ORIENTED_EDGE('',*,*,#31980,.T.); +#32164 = ORIENTED_EDGE('',*,*,#32165,.T.); +#32165 = EDGE_CURVE('',#31833,#32166,#32168,.T.); +#32166 = VERTEX_POINT('',#32167); +#32167 = CARTESIAN_POINT('',(-0.3,0.25,0.35)); +#32168 = LINE('',#32169,#32170); +#32169 = CARTESIAN_POINT('',(-0.3,0.25,0.315)); +#32170 = VECTOR('',#32171,1.); +#32171 = DIRECTION('',(0.,0.,1.)); +#32172 = ORIENTED_EDGE('',*,*,#32173,.F.); +#32173 = EDGE_CURVE('',#32134,#32166,#32174,.T.); +#32174 = LINE('',#32175,#32176); +#32175 = CARTESIAN_POINT('',(-0.3,-0.25,0.35)); +#32176 = VECTOR('',#32177,1.); +#32177 = DIRECTION('',(0.,1.,0.)); +#32178 = PLANE('',#32179); +#32179 = AXIS2_PLACEMENT_3D('',#32180,#32181,#32182); +#32180 = CARTESIAN_POINT('',(-0.3,-0.25,0.315)); +#32181 = DIRECTION('',(1.,0.,0.)); +#32182 = DIRECTION('',(0.,0.,1.)); +#32183 = ADVANCED_FACE('',(#32184),#32247,.T.); +#32184 = FACE_BOUND('',#32185,.T.); +#32185 = EDGE_LOOP('',(#32186,#32196,#32203,#32204,#32205,#32206,#32215, + #32223,#32232,#32240)); +#32186 = ORIENTED_EDGE('',*,*,#32187,.F.); +#32187 = EDGE_CURVE('',#32188,#32190,#32192,.T.); +#32188 = VERTEX_POINT('',#32189); +#32189 = CARTESIAN_POINT('',(0.335,0.25,-2.775557561563E-17)); +#32190 = VERTEX_POINT('',#32191); +#32191 = CARTESIAN_POINT('',(0.465,0.25,-2.775557561563E-17)); +#32192 = LINE('',#32193,#32194); +#32193 = CARTESIAN_POINT('',(0.3,0.25,0.)); +#32194 = VECTOR('',#32195,1.); +#32195 = DIRECTION('',(1.,0.,0.)); +#32196 = ORIENTED_EDGE('',*,*,#32197,.F.); +#32197 = EDGE_CURVE('',#32025,#32188,#32198,.T.); +#32198 = CIRCLE('',#32199,3.5E-02); +#32199 = AXIS2_PLACEMENT_3D('',#32200,#32201,#32202); +#32200 = CARTESIAN_POINT('',(0.335,0.25,3.5E-02)); +#32201 = DIRECTION('',(0.,-1.,0.)); +#32202 = DIRECTION('',(0.,0.,1.)); +#32203 = ORIENTED_EDGE('',*,*,#32024,.T.); +#32204 = ORIENTED_EDGE('',*,*,#32016,.T.); +#32205 = ORIENTED_EDGE('',*,*,#32008,.F.); +#32206 = ORIENTED_EDGE('',*,*,#32207,.T.); +#32207 = EDGE_CURVE('',#32001,#32208,#32210,.T.); +#32208 = VERTEX_POINT('',#32209); +#32209 = CARTESIAN_POINT('',(0.335,0.25,0.35)); +#32210 = CIRCLE('',#32211,3.5E-02); +#32211 = AXIS2_PLACEMENT_3D('',#32212,#32213,#32214); +#32212 = CARTESIAN_POINT('',(0.335,0.25,0.315)); +#32213 = DIRECTION('',(0.,1.,0.)); +#32214 = DIRECTION('',(0.,-0.,1.)); +#32215 = ORIENTED_EDGE('',*,*,#32216,.T.); +#32216 = EDGE_CURVE('',#32208,#32217,#32219,.T.); +#32217 = VERTEX_POINT('',#32218); +#32218 = CARTESIAN_POINT('',(0.465,0.25,0.35)); +#32219 = LINE('',#32220,#32221); +#32220 = CARTESIAN_POINT('',(0.3,0.25,0.35)); +#32221 = VECTOR('',#32222,1.); +#32222 = DIRECTION('',(1.,0.,0.)); +#32223 = ORIENTED_EDGE('',*,*,#32224,.F.); +#32224 = EDGE_CURVE('',#32225,#32217,#32227,.T.); +#32225 = VERTEX_POINT('',#32226); +#32226 = CARTESIAN_POINT('',(0.5,0.25,0.315)); +#32227 = CIRCLE('',#32228,3.5E-02); +#32228 = AXIS2_PLACEMENT_3D('',#32229,#32230,#32231); +#32229 = CARTESIAN_POINT('',(0.465,0.25,0.315)); +#32230 = DIRECTION('',(0.,-1.,0.)); +#32231 = DIRECTION('',(0.,0.,1.)); +#32232 = ORIENTED_EDGE('',*,*,#32233,.F.); +#32233 = EDGE_CURVE('',#32234,#32225,#32236,.T.); +#32234 = VERTEX_POINT('',#32235); +#32235 = CARTESIAN_POINT('',(0.5,0.25,3.5E-02)); +#32236 = LINE('',#32237,#32238); +#32237 = CARTESIAN_POINT('',(0.5,0.25,0.)); +#32238 = VECTOR('',#32239,1.); +#32239 = DIRECTION('',(0.,0.,1.)); +#32240 = ORIENTED_EDGE('',*,*,#32241,.T.); +#32241 = EDGE_CURVE('',#32234,#32190,#32242,.T.); +#32242 = CIRCLE('',#32243,3.5E-02); +#32243 = AXIS2_PLACEMENT_3D('',#32244,#32245,#32246); +#32244 = CARTESIAN_POINT('',(0.465,0.25,3.5E-02)); +#32245 = DIRECTION('',(0.,1.,0.)); +#32246 = DIRECTION('',(0.,-0.,1.)); +#32247 = PLANE('',#32248); +#32248 = AXIS2_PLACEMENT_3D('',#32249,#32250,#32251); +#32249 = CARTESIAN_POINT('',(0.3,0.25,0.)); +#32250 = DIRECTION('',(0.,1.,0.)); +#32251 = DIRECTION('',(0.,-0.,1.)); +#32252 = ADVANCED_FACE('',(#32253),#32271,.T.); +#32253 = FACE_BOUND('',#32254,.T.); +#32254 = EDGE_LOOP('',(#32255,#32256,#32257,#32265)); +#32255 = ORIENTED_EDGE('',*,*,#32000,.F.); +#32256 = ORIENTED_EDGE('',*,*,#32165,.T.); +#32257 = ORIENTED_EDGE('',*,*,#32258,.T.); +#32258 = EDGE_CURVE('',#32166,#32259,#32261,.T.); +#32259 = VERTEX_POINT('',#32260); +#32260 = CARTESIAN_POINT('',(0.3,0.25,0.35)); +#32261 = LINE('',#32262,#32263); +#32262 = CARTESIAN_POINT('',(-0.3,0.25,0.35)); +#32263 = VECTOR('',#32264,1.); +#32264 = DIRECTION('',(1.,0.,0.)); +#32265 = ORIENTED_EDGE('',*,*,#32266,.F.); +#32266 = EDGE_CURVE('',#32001,#32259,#32267,.T.); +#32267 = LINE('',#32268,#32269); +#32268 = CARTESIAN_POINT('',(0.3,0.25,0.315)); +#32269 = VECTOR('',#32270,1.); +#32270 = DIRECTION('',(0.,0.,1.)); +#32271 = PLANE('',#32272); +#32272 = AXIS2_PLACEMENT_3D('',#32273,#32274,#32275); +#32273 = CARTESIAN_POINT('',(-0.3,0.25,0.315)); +#32274 = DIRECTION('',(0.,1.,0.)); +#32275 = DIRECTION('',(0.,-0.,1.)); +#32276 = ADVANCED_FACE('',(#32277),#32288,.T.); +#32277 = FACE_BOUND('',#32278,.T.); +#32278 = EDGE_LOOP('',(#32279,#32280,#32281,#32287)); +#32279 = ORIENTED_EDGE('',*,*,#32048,.T.); +#32280 = ORIENTED_EDGE('',*,*,#32197,.T.); +#32281 = ORIENTED_EDGE('',*,*,#32282,.F.); +#32282 = EDGE_CURVE('',#32064,#32188,#32283,.T.); +#32283 = LINE('',#32284,#32285); +#32284 = CARTESIAN_POINT('',(0.335,-0.25,-2.775557561563E-17)); +#32285 = VECTOR('',#32286,1.); +#32286 = DIRECTION('',(0.,1.,0.)); +#32287 = ORIENTED_EDGE('',*,*,#32073,.F.); +#32288 = CYLINDRICAL_SURFACE('',#32289,3.5E-02); +#32289 = AXIS2_PLACEMENT_3D('',#32290,#32291,#32292); +#32290 = CARTESIAN_POINT('',(0.335,-0.25,3.5E-02)); +#32291 = DIRECTION('',(0.,1.,0.)); +#32292 = DIRECTION('',(-1.,0.,0.)); +#32293 = ADVANCED_FACE('',(#32294),#32305,.F.); +#32294 = FACE_BOUND('',#32295,.F.); +#32295 = EDGE_LOOP('',(#32296,#32297,#32298,#32299)); +#32296 = ORIENTED_EDGE('',*,*,#32187,.F.); +#32297 = ORIENTED_EDGE('',*,*,#32282,.F.); +#32298 = ORIENTED_EDGE('',*,*,#32063,.T.); +#32299 = ORIENTED_EDGE('',*,*,#32300,.T.); +#32300 = EDGE_CURVE('',#32066,#32190,#32301,.T.); +#32301 = LINE('',#32302,#32303); +#32302 = CARTESIAN_POINT('',(0.465,-0.25,-2.775557561563E-17)); +#32303 = VECTOR('',#32304,1.); +#32304 = DIRECTION('',(0.,1.,0.)); +#32305 = PLANE('',#32306); +#32306 = AXIS2_PLACEMENT_3D('',#32307,#32308,#32309); +#32307 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#32308 = DIRECTION('',(0.,0.,1.)); +#32309 = DIRECTION('',(1.,0.,-0.)); +#32310 = ADVANCED_FACE('',(#32311),#32322,.T.); +#32311 = FACE_BOUND('',#32312,.T.); +#32312 = EDGE_LOOP('',(#32313,#32314,#32315,#32316)); +#32313 = ORIENTED_EDGE('',*,*,#32117,.T.); +#32314 = ORIENTED_EDGE('',*,*,#32300,.T.); +#32315 = ORIENTED_EDGE('',*,*,#32241,.F.); +#32316 = ORIENTED_EDGE('',*,*,#32317,.F.); +#32317 = EDGE_CURVE('',#32110,#32234,#32318,.T.); +#32318 = LINE('',#32319,#32320); +#32319 = CARTESIAN_POINT('',(0.5,-0.25,3.5E-02)); +#32320 = VECTOR('',#32321,1.); +#32321 = DIRECTION('',(0.,1.,0.)); +#32322 = CYLINDRICAL_SURFACE('',#32323,3.5E-02); +#32323 = AXIS2_PLACEMENT_3D('',#32324,#32325,#32326); +#32324 = CARTESIAN_POINT('',(0.465,-0.25,3.5E-02)); +#32325 = DIRECTION('',(0.,1.,0.)); +#32326 = DIRECTION('',(1.,0.,0.)); +#32327 = ADVANCED_FACE('',(#32328),#32339,.T.); +#32328 = FACE_BOUND('',#32329,.T.); +#32329 = EDGE_LOOP('',(#32330,#32331,#32332,#32333)); +#32330 = ORIENTED_EDGE('',*,*,#32109,.F.); +#32331 = ORIENTED_EDGE('',*,*,#32317,.T.); +#32332 = ORIENTED_EDGE('',*,*,#32233,.T.); +#32333 = ORIENTED_EDGE('',*,*,#32334,.F.); +#32334 = EDGE_CURVE('',#32101,#32225,#32335,.T.); +#32335 = LINE('',#32336,#32337); +#32336 = CARTESIAN_POINT('',(0.5,-0.25,0.315)); +#32337 = VECTOR('',#32338,1.); +#32338 = DIRECTION('',(0.,1.,0.)); +#32339 = PLANE('',#32340); +#32340 = AXIS2_PLACEMENT_3D('',#32341,#32342,#32343); +#32341 = CARTESIAN_POINT('',(0.5,-0.25,0.)); +#32342 = DIRECTION('',(1.,0.,0.)); +#32343 = DIRECTION('',(0.,0.,1.)); +#32344 = ADVANCED_FACE('',(#32345),#32356,.T.); +#32345 = FACE_BOUND('',#32346,.T.); +#32346 = EDGE_LOOP('',(#32347,#32348,#32349,#32355)); +#32347 = ORIENTED_EDGE('',*,*,#32334,.T.); +#32348 = ORIENTED_EDGE('',*,*,#32224,.T.); +#32349 = ORIENTED_EDGE('',*,*,#32350,.F.); +#32350 = EDGE_CURVE('',#32093,#32217,#32351,.T.); +#32351 = LINE('',#32352,#32353); +#32352 = CARTESIAN_POINT('',(0.465,-0.25,0.35)); +#32353 = VECTOR('',#32354,1.); +#32354 = DIRECTION('',(0.,1.,0.)); +#32355 = ORIENTED_EDGE('',*,*,#32100,.F.); +#32356 = CYLINDRICAL_SURFACE('',#32357,3.5E-02); +#32357 = AXIS2_PLACEMENT_3D('',#32358,#32359,#32360); +#32358 = CARTESIAN_POINT('',(0.465,-0.25,0.315)); +#32359 = DIRECTION('',(0.,1.,0.)); +#32360 = DIRECTION('',(1.,0.,0.)); +#32361 = ADVANCED_FACE('',(#32362),#32373,.T.); +#32362 = FACE_BOUND('',#32363,.T.); +#32363 = EDGE_LOOP('',(#32364,#32365,#32371,#32372)); +#32364 = ORIENTED_EDGE('',*,*,#32216,.F.); +#32365 = ORIENTED_EDGE('',*,*,#32366,.F.); +#32366 = EDGE_CURVE('',#32084,#32208,#32367,.T.); +#32367 = LINE('',#32368,#32369); +#32368 = CARTESIAN_POINT('',(0.335,-0.25,0.35)); +#32369 = VECTOR('',#32370,1.); +#32370 = DIRECTION('',(0.,1.,0.)); +#32371 = ORIENTED_EDGE('',*,*,#32092,.T.); +#32372 = ORIENTED_EDGE('',*,*,#32350,.T.); +#32373 = PLANE('',#32374); +#32374 = AXIS2_PLACEMENT_3D('',#32375,#32376,#32377); +#32375 = CARTESIAN_POINT('',(0.3,-0.25,0.35)); +#32376 = DIRECTION('',(0.,0.,1.)); +#32377 = DIRECTION('',(1.,0.,-0.)); +#32378 = ADVANCED_FACE('',(#32379),#32390,.T.); +#32379 = FACE_BOUND('',#32380,.T.); +#32380 = EDGE_LOOP('',(#32381,#32382,#32383,#32384)); +#32381 = ORIENTED_EDGE('',*,*,#32083,.T.); +#32382 = ORIENTED_EDGE('',*,*,#32366,.T.); +#32383 = ORIENTED_EDGE('',*,*,#32207,.F.); +#32384 = ORIENTED_EDGE('',*,*,#32385,.F.); +#32385 = EDGE_CURVE('',#31918,#32001,#32386,.T.); +#32386 = LINE('',#32387,#32388); +#32387 = CARTESIAN_POINT('',(0.3,-0.25,0.315)); +#32388 = VECTOR('',#32389,1.); +#32389 = DIRECTION('',(0.,1.,0.)); +#32390 = CYLINDRICAL_SURFACE('',#32391,3.5E-02); +#32391 = AXIS2_PLACEMENT_3D('',#32392,#32393,#32394); +#32392 = CARTESIAN_POINT('',(0.335,-0.25,0.315)); +#32393 = DIRECTION('',(0.,1.,0.)); +#32394 = DIRECTION('',(-1.,0.,0.)); +#32395 = ADVANCED_FACE('',(#32396),#32407,.T.); +#32396 = FACE_BOUND('',#32397,.T.); +#32397 = EDGE_LOOP('',(#32398,#32399,#32400,#32401)); +#32398 = ORIENTED_EDGE('',*,*,#32149,.F.); +#32399 = ORIENTED_EDGE('',*,*,#32385,.T.); +#32400 = ORIENTED_EDGE('',*,*,#32266,.T.); +#32401 = ORIENTED_EDGE('',*,*,#32402,.F.); +#32402 = EDGE_CURVE('',#32142,#32259,#32403,.T.); +#32403 = LINE('',#32404,#32405); +#32404 = CARTESIAN_POINT('',(0.3,-0.25,0.35)); +#32405 = VECTOR('',#32406,1.); +#32406 = DIRECTION('',(0.,1.,0.)); +#32407 = PLANE('',#32408); +#32408 = AXIS2_PLACEMENT_3D('',#32409,#32410,#32411); +#32409 = CARTESIAN_POINT('',(0.3,-0.25,0.315)); +#32410 = DIRECTION('',(1.,0.,0.)); +#32411 = DIRECTION('',(0.,0.,1.)); +#32412 = ADVANCED_FACE('',(#32413),#32419,.T.); +#32413 = FACE_BOUND('',#32414,.T.); +#32414 = EDGE_LOOP('',(#32415,#32416,#32417,#32418)); +#32415 = ORIENTED_EDGE('',*,*,#32173,.F.); +#32416 = ORIENTED_EDGE('',*,*,#32141,.T.); +#32417 = ORIENTED_EDGE('',*,*,#32402,.T.); +#32418 = ORIENTED_EDGE('',*,*,#32258,.F.); +#32419 = PLANE('',#32420); +#32420 = AXIS2_PLACEMENT_3D('',#32421,#32422,#32423); +#32421 = CARTESIAN_POINT('',(-0.3,-0.25,0.35)); +#32422 = DIRECTION('',(0.,0.,1.)); +#32423 = DIRECTION('',(1.,0.,-0.)); +#32424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#32428)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#32425,#32426,#32427)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#32425 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#32426 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#32427 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#32428 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#32425, + 'distance_accuracy_value','confusion accuracy'); +#32429 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#32430,#32432); +#32430 = ( REPRESENTATION_RELATIONSHIP('','',#31633,#31610) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#32431) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#32431 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31611); +#32432 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #32433); +#32433 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','=>[0:1:1:14]','',#31605, + #31628,$); +#32434 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#31630)); +#32435 = SHAPE_DEFINITION_REPRESENTATION(#32436,#32442); +#32436 = PRODUCT_DEFINITION_SHAPE('','',#32437); +#32437 = PRODUCT_DEFINITION('design','',#32438,#32441); +#32438 = PRODUCT_DEFINITION_FORMATION('','',#32439); +#32439 = PRODUCT('C_0402_1005Metric','C_0402_1005Metric','',(#32440)); +#32440 = PRODUCT_CONTEXT('',#2,'mechanical'); +#32441 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#32442 = SHAPE_REPRESENTATION('',(#11,#32443),#32447); +#32443 = AXIS2_PLACEMENT_3D('',#32444,#32445,#32446); +#32444 = CARTESIAN_POINT('',(0.,0.,0.)); +#32445 = DIRECTION('',(0.,0.,1.)); +#32446 = DIRECTION('',(1.,0.,-0.)); +#32447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#32451)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#32448,#32449,#32450)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#32448 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#32449 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#32450 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#32451 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#32448, + 'distance_accuracy_value','confusion accuracy'); +#32452 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#32453,#32455); +#32453 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#32454) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#32454 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#32455 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #32456); +#32456 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','C_XBEE_RC1','',#5,#32437,$ + ); +#32457 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#32439)); +#32458 = SHAPE_DEFINITION_REPRESENTATION(#32459,#32465); +#32459 = PRODUCT_DEFINITION_SHAPE('','',#32460); +#32460 = PRODUCT_DEFINITION('design','',#32461,#32464); +#32461 = PRODUCT_DEFINITION_FORMATION('','',#32462); +#32462 = PRODUCT('C_0402_1005Metric','C_0402_1005Metric','',(#32463)); +#32463 = PRODUCT_CONTEXT('',#2,'mechanical'); +#32464 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#32465 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#32466),#33320); +#32466 = MANIFOLD_SOLID_BREP('',#32467); +#32467 = CLOSED_SHELL('',(#32468,#32544,#32575,#32600,#32625,#32649, + #32673,#32698,#32723,#32740,#32826,#32858,#32882,#32907,#32931, + #32956,#32980,#33005,#33022,#33108,#33139,#33164,#33189,#33213, + #33237,#33262,#33287,#33304)); +#32468 = ADVANCED_FACE('',(#32469),#32539,.F.); +#32469 = FACE_BOUND('',#32470,.F.); +#32470 = EDGE_LOOP('',(#32471,#32481,#32490,#32498,#32507,#32515,#32524, + #32532)); +#32471 = ORIENTED_EDGE('',*,*,#32472,.F.); +#32472 = EDGE_CURVE('',#32473,#32475,#32477,.T.); +#32473 = VERTEX_POINT('',#32474); +#32474 = CARTESIAN_POINT('',(-0.5,-0.25,2.E-02)); +#32475 = VERTEX_POINT('',#32476); +#32476 = CARTESIAN_POINT('',(-0.5,-0.25,0.48)); +#32477 = LINE('',#32478,#32479); +#32478 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#32479 = VECTOR('',#32480,1.); +#32480 = DIRECTION('',(0.,0.,1.)); +#32481 = ORIENTED_EDGE('',*,*,#32482,.T.); +#32482 = EDGE_CURVE('',#32473,#32483,#32485,.T.); +#32483 = VERTEX_POINT('',#32484); +#32484 = CARTESIAN_POINT('',(-0.5,-0.23,0.)); +#32485 = CIRCLE('',#32486,2.E-02); +#32486 = AXIS2_PLACEMENT_3D('',#32487,#32488,#32489); +#32487 = CARTESIAN_POINT('',(-0.5,-0.23,2.E-02)); +#32488 = DIRECTION('',(1.,0.,-0.)); +#32489 = DIRECTION('',(0.,0.,1.)); +#32490 = ORIENTED_EDGE('',*,*,#32491,.T.); +#32491 = EDGE_CURVE('',#32483,#32492,#32494,.T.); +#32492 = VERTEX_POINT('',#32493); +#32493 = CARTESIAN_POINT('',(-0.5,0.23,0.)); +#32494 = LINE('',#32495,#32496); +#32495 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#32496 = VECTOR('',#32497,1.); +#32497 = DIRECTION('',(0.,1.,0.)); +#32498 = ORIENTED_EDGE('',*,*,#32499,.F.); +#32499 = EDGE_CURVE('',#32500,#32492,#32502,.T.); +#32500 = VERTEX_POINT('',#32501); +#32501 = CARTESIAN_POINT('',(-0.5,0.25,2.E-02)); +#32502 = CIRCLE('',#32503,2.E-02); +#32503 = AXIS2_PLACEMENT_3D('',#32504,#32505,#32506); +#32504 = CARTESIAN_POINT('',(-0.5,0.23,2.E-02)); +#32505 = DIRECTION('',(-1.,0.,0.)); +#32506 = DIRECTION('',(0.,0.,1.)); +#32507 = ORIENTED_EDGE('',*,*,#32508,.T.); +#32508 = EDGE_CURVE('',#32500,#32509,#32511,.T.); +#32509 = VERTEX_POINT('',#32510); +#32510 = CARTESIAN_POINT('',(-0.5,0.25,0.48)); +#32511 = LINE('',#32512,#32513); +#32512 = CARTESIAN_POINT('',(-0.5,0.25,0.)); +#32513 = VECTOR('',#32514,1.); +#32514 = DIRECTION('',(0.,0.,1.)); +#32515 = ORIENTED_EDGE('',*,*,#32516,.T.); +#32516 = EDGE_CURVE('',#32509,#32517,#32519,.T.); +#32517 = VERTEX_POINT('',#32518); +#32518 = CARTESIAN_POINT('',(-0.5,0.23,0.5)); +#32519 = CIRCLE('',#32520,2.E-02); +#32520 = AXIS2_PLACEMENT_3D('',#32521,#32522,#32523); +#32521 = CARTESIAN_POINT('',(-0.5,0.23,0.48)); +#32522 = DIRECTION('',(1.,0.,-0.)); +#32523 = DIRECTION('',(0.,0.,1.)); +#32524 = ORIENTED_EDGE('',*,*,#32525,.F.); +#32525 = EDGE_CURVE('',#32526,#32517,#32528,.T.); +#32526 = VERTEX_POINT('',#32527); +#32527 = CARTESIAN_POINT('',(-0.5,-0.23,0.5)); +#32528 = LINE('',#32529,#32530); +#32529 = CARTESIAN_POINT('',(-0.5,-0.25,0.5)); +#32530 = VECTOR('',#32531,1.); +#32531 = DIRECTION('',(0.,1.,0.)); +#32532 = ORIENTED_EDGE('',*,*,#32533,.F.); +#32533 = EDGE_CURVE('',#32475,#32526,#32534,.T.); +#32534 = CIRCLE('',#32535,2.E-02); +#32535 = AXIS2_PLACEMENT_3D('',#32536,#32537,#32538); +#32536 = CARTESIAN_POINT('',(-0.5,-0.23,0.48)); +#32537 = DIRECTION('',(-1.,0.,0.)); +#32538 = DIRECTION('',(0.,0.,1.)); +#32539 = PLANE('',#32540); +#32540 = AXIS2_PLACEMENT_3D('',#32541,#32542,#32543); +#32541 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#32542 = DIRECTION('',(1.,0.,0.)); +#32543 = DIRECTION('',(0.,0.,1.)); +#32544 = ADVANCED_FACE('',(#32545),#32570,.F.); +#32545 = FACE_BOUND('',#32546,.F.); +#32546 = EDGE_LOOP('',(#32547,#32557,#32563,#32564)); +#32547 = ORIENTED_EDGE('',*,*,#32548,.F.); +#32548 = EDGE_CURVE('',#32549,#32551,#32553,.T.); +#32549 = VERTEX_POINT('',#32550); +#32550 = CARTESIAN_POINT('',(-0.3,-0.25,2.E-02)); +#32551 = VERTEX_POINT('',#32552); +#32552 = CARTESIAN_POINT('',(-0.3,-0.25,0.48)); +#32553 = LINE('',#32554,#32555); +#32554 = CARTESIAN_POINT('',(-0.3,-0.25,0.)); +#32555 = VECTOR('',#32556,1.); +#32556 = DIRECTION('',(0.,0.,1.)); +#32557 = ORIENTED_EDGE('',*,*,#32558,.F.); +#32558 = EDGE_CURVE('',#32473,#32549,#32559,.T.); +#32559 = LINE('',#32560,#32561); +#32560 = CARTESIAN_POINT('',(-0.5,-0.25,2.E-02)); +#32561 = VECTOR('',#32562,1.); +#32562 = DIRECTION('',(1.,0.,0.)); +#32563 = ORIENTED_EDGE('',*,*,#32472,.T.); +#32564 = ORIENTED_EDGE('',*,*,#32565,.T.); +#32565 = EDGE_CURVE('',#32475,#32551,#32566,.T.); +#32566 = LINE('',#32567,#32568); +#32567 = CARTESIAN_POINT('',(-0.5,-0.25,0.48)); +#32568 = VECTOR('',#32569,1.); +#32569 = DIRECTION('',(1.,0.,0.)); +#32570 = PLANE('',#32571); +#32571 = AXIS2_PLACEMENT_3D('',#32572,#32573,#32574); +#32572 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#32573 = DIRECTION('',(0.,1.,0.)); +#32574 = DIRECTION('',(0.,-0.,1.)); +#32575 = ADVANCED_FACE('',(#32576),#32595,.T.); +#32576 = FACE_BOUND('',#32577,.T.); +#32577 = EDGE_LOOP('',(#32578,#32579,#32587,#32594)); +#32578 = ORIENTED_EDGE('',*,*,#32482,.T.); +#32579 = ORIENTED_EDGE('',*,*,#32580,.T.); +#32580 = EDGE_CURVE('',#32483,#32581,#32583,.T.); +#32581 = VERTEX_POINT('',#32582); +#32582 = CARTESIAN_POINT('',(-0.3,-0.23,0.)); +#32583 = LINE('',#32584,#32585); +#32584 = CARTESIAN_POINT('',(-0.5,-0.23,0.)); +#32585 = VECTOR('',#32586,1.); +#32586 = DIRECTION('',(1.,0.,0.)); +#32587 = ORIENTED_EDGE('',*,*,#32588,.F.); +#32588 = EDGE_CURVE('',#32549,#32581,#32589,.T.); +#32589 = CIRCLE('',#32590,2.E-02); +#32590 = AXIS2_PLACEMENT_3D('',#32591,#32592,#32593); +#32591 = CARTESIAN_POINT('',(-0.3,-0.23,2.E-02)); +#32592 = DIRECTION('',(1.,0.,-0.)); +#32593 = DIRECTION('',(0.,0.,1.)); +#32594 = ORIENTED_EDGE('',*,*,#32558,.F.); +#32595 = CYLINDRICAL_SURFACE('',#32596,2.E-02); +#32596 = AXIS2_PLACEMENT_3D('',#32597,#32598,#32599); +#32597 = CARTESIAN_POINT('',(-0.5,-0.23,2.E-02)); +#32598 = DIRECTION('',(1.,0.,0.)); +#32599 = DIRECTION('',(0.,-1.,0.)); +#32600 = ADVANCED_FACE('',(#32601),#32620,.T.); +#32601 = FACE_BOUND('',#32602,.T.); +#32602 = EDGE_LOOP('',(#32603,#32604,#32613,#32619)); +#32603 = ORIENTED_EDGE('',*,*,#32565,.T.); +#32604 = ORIENTED_EDGE('',*,*,#32605,.T.); +#32605 = EDGE_CURVE('',#32551,#32606,#32608,.T.); +#32606 = VERTEX_POINT('',#32607); +#32607 = CARTESIAN_POINT('',(-0.3,-0.23,0.5)); +#32608 = CIRCLE('',#32609,2.E-02); +#32609 = AXIS2_PLACEMENT_3D('',#32610,#32611,#32612); +#32610 = CARTESIAN_POINT('',(-0.3,-0.23,0.48)); +#32611 = DIRECTION('',(-1.,0.,0.)); +#32612 = DIRECTION('',(0.,0.,1.)); +#32613 = ORIENTED_EDGE('',*,*,#32614,.F.); +#32614 = EDGE_CURVE('',#32526,#32606,#32615,.T.); +#32615 = LINE('',#32616,#32617); +#32616 = CARTESIAN_POINT('',(-0.5,-0.23,0.5)); +#32617 = VECTOR('',#32618,1.); +#32618 = DIRECTION('',(1.,0.,0.)); +#32619 = ORIENTED_EDGE('',*,*,#32533,.F.); +#32620 = CYLINDRICAL_SURFACE('',#32621,2.E-02); +#32621 = AXIS2_PLACEMENT_3D('',#32622,#32623,#32624); +#32622 = CARTESIAN_POINT('',(-0.5,-0.23,0.48)); +#32623 = DIRECTION('',(1.,0.,0.)); +#32624 = DIRECTION('',(0.,-1.,0.)); +#32625 = ADVANCED_FACE('',(#32626),#32644,.F.); +#32626 = FACE_BOUND('',#32627,.F.); +#32627 = EDGE_LOOP('',(#32628,#32629,#32630,#32638)); +#32628 = ORIENTED_EDGE('',*,*,#32491,.F.); +#32629 = ORIENTED_EDGE('',*,*,#32580,.T.); +#32630 = ORIENTED_EDGE('',*,*,#32631,.T.); +#32631 = EDGE_CURVE('',#32581,#32632,#32634,.T.); +#32632 = VERTEX_POINT('',#32633); +#32633 = CARTESIAN_POINT('',(-0.3,0.23,0.)); +#32634 = LINE('',#32635,#32636); +#32635 = CARTESIAN_POINT('',(-0.3,-0.25,0.)); +#32636 = VECTOR('',#32637,1.); +#32637 = DIRECTION('',(0.,1.,0.)); +#32638 = ORIENTED_EDGE('',*,*,#32639,.F.); +#32639 = EDGE_CURVE('',#32492,#32632,#32640,.T.); +#32640 = LINE('',#32641,#32642); +#32641 = CARTESIAN_POINT('',(-0.5,0.23,0.)); +#32642 = VECTOR('',#32643,1.); +#32643 = DIRECTION('',(1.,0.,0.)); +#32644 = PLANE('',#32645); +#32645 = AXIS2_PLACEMENT_3D('',#32646,#32647,#32648); +#32646 = CARTESIAN_POINT('',(-0.5,-0.25,0.)); +#32647 = DIRECTION('',(0.,0.,1.)); +#32648 = DIRECTION('',(1.,0.,-0.)); +#32649 = ADVANCED_FACE('',(#32650),#32668,.T.); +#32650 = FACE_BOUND('',#32651,.T.); +#32651 = EDGE_LOOP('',(#32652,#32653,#32654,#32662)); +#32652 = ORIENTED_EDGE('',*,*,#32525,.F.); +#32653 = ORIENTED_EDGE('',*,*,#32614,.T.); +#32654 = ORIENTED_EDGE('',*,*,#32655,.T.); +#32655 = EDGE_CURVE('',#32606,#32656,#32658,.T.); +#32656 = VERTEX_POINT('',#32657); +#32657 = CARTESIAN_POINT('',(-0.3,0.23,0.5)); +#32658 = LINE('',#32659,#32660); +#32659 = CARTESIAN_POINT('',(-0.3,-0.25,0.5)); +#32660 = VECTOR('',#32661,1.); +#32661 = DIRECTION('',(0.,1.,0.)); +#32662 = ORIENTED_EDGE('',*,*,#32663,.F.); +#32663 = EDGE_CURVE('',#32517,#32656,#32664,.T.); +#32664 = LINE('',#32665,#32666); +#32665 = CARTESIAN_POINT('',(-0.5,0.23,0.5)); +#32666 = VECTOR('',#32667,1.); +#32667 = DIRECTION('',(1.,0.,0.)); +#32668 = PLANE('',#32669); +#32669 = AXIS2_PLACEMENT_3D('',#32670,#32671,#32672); +#32670 = CARTESIAN_POINT('',(-0.5,-0.25,0.5)); +#32671 = DIRECTION('',(0.,0.,1.)); +#32672 = DIRECTION('',(1.,0.,-0.)); +#32673 = ADVANCED_FACE('',(#32674),#32693,.T.); +#32674 = FACE_BOUND('',#32675,.T.); +#32675 = EDGE_LOOP('',(#32676,#32684,#32691,#32692)); +#32676 = ORIENTED_EDGE('',*,*,#32677,.T.); +#32677 = EDGE_CURVE('',#32500,#32678,#32680,.T.); +#32678 = VERTEX_POINT('',#32679); +#32679 = CARTESIAN_POINT('',(-0.3,0.25,2.E-02)); +#32680 = LINE('',#32681,#32682); +#32681 = CARTESIAN_POINT('',(-0.5,0.25,2.E-02)); +#32682 = VECTOR('',#32683,1.); +#32683 = DIRECTION('',(1.,0.,0.)); +#32684 = ORIENTED_EDGE('',*,*,#32685,.T.); +#32685 = EDGE_CURVE('',#32678,#32632,#32686,.T.); +#32686 = CIRCLE('',#32687,2.E-02); +#32687 = AXIS2_PLACEMENT_3D('',#32688,#32689,#32690); +#32688 = CARTESIAN_POINT('',(-0.3,0.23,2.E-02)); +#32689 = DIRECTION('',(-1.,0.,0.)); +#32690 = DIRECTION('',(0.,0.,1.)); +#32691 = ORIENTED_EDGE('',*,*,#32639,.F.); +#32692 = ORIENTED_EDGE('',*,*,#32499,.F.); +#32693 = CYLINDRICAL_SURFACE('',#32694,2.E-02); +#32694 = AXIS2_PLACEMENT_3D('',#32695,#32696,#32697); +#32695 = CARTESIAN_POINT('',(-0.5,0.23,2.E-02)); +#32696 = DIRECTION('',(1.,0.,0.)); +#32697 = DIRECTION('',(-0.,1.,0.)); +#32698 = ADVANCED_FACE('',(#32699),#32718,.T.); +#32699 = FACE_BOUND('',#32700,.T.); +#32700 = EDGE_LOOP('',(#32701,#32702,#32703,#32712)); +#32701 = ORIENTED_EDGE('',*,*,#32516,.T.); +#32702 = ORIENTED_EDGE('',*,*,#32663,.T.); +#32703 = ORIENTED_EDGE('',*,*,#32704,.F.); +#32704 = EDGE_CURVE('',#32705,#32656,#32707,.T.); +#32705 = VERTEX_POINT('',#32706); +#32706 = CARTESIAN_POINT('',(-0.3,0.25,0.48)); +#32707 = CIRCLE('',#32708,2.E-02); +#32708 = AXIS2_PLACEMENT_3D('',#32709,#32710,#32711); +#32709 = CARTESIAN_POINT('',(-0.3,0.23,0.48)); +#32710 = DIRECTION('',(1.,0.,-0.)); +#32711 = DIRECTION('',(0.,0.,1.)); +#32712 = ORIENTED_EDGE('',*,*,#32713,.F.); +#32713 = EDGE_CURVE('',#32509,#32705,#32714,.T.); +#32714 = LINE('',#32715,#32716); +#32715 = CARTESIAN_POINT('',(-0.5,0.25,0.48)); +#32716 = VECTOR('',#32717,1.); +#32717 = DIRECTION('',(1.,0.,0.)); +#32718 = CYLINDRICAL_SURFACE('',#32719,2.E-02); +#32719 = AXIS2_PLACEMENT_3D('',#32720,#32721,#32722); +#32720 = CARTESIAN_POINT('',(-0.5,0.23,0.48)); +#32721 = DIRECTION('',(1.,0.,0.)); +#32722 = DIRECTION('',(-0.,1.,0.)); +#32723 = ADVANCED_FACE('',(#32724),#32735,.T.); +#32724 = FACE_BOUND('',#32725,.T.); +#32725 = EDGE_LOOP('',(#32726,#32732,#32733,#32734)); +#32726 = ORIENTED_EDGE('',*,*,#32727,.F.); +#32727 = EDGE_CURVE('',#32678,#32705,#32728,.T.); +#32728 = LINE('',#32729,#32730); +#32729 = CARTESIAN_POINT('',(-0.3,0.25,0.)); +#32730 = VECTOR('',#32731,1.); +#32731 = DIRECTION('',(0.,0.,1.)); +#32732 = ORIENTED_EDGE('',*,*,#32677,.F.); +#32733 = ORIENTED_EDGE('',*,*,#32508,.T.); +#32734 = ORIENTED_EDGE('',*,*,#32713,.T.); +#32735 = PLANE('',#32736); +#32736 = AXIS2_PLACEMENT_3D('',#32737,#32738,#32739); +#32737 = CARTESIAN_POINT('',(-0.5,0.25,0.)); +#32738 = DIRECTION('',(0.,1.,0.)); +#32739 = DIRECTION('',(0.,-0.,1.)); +#32740 = ADVANCED_FACE('',(#32741,#32751),#32821,.T.); +#32741 = FACE_BOUND('',#32742,.T.); +#32742 = EDGE_LOOP('',(#32743,#32744,#32745,#32746,#32747,#32748,#32749, + #32750)); +#32743 = ORIENTED_EDGE('',*,*,#32548,.F.); +#32744 = ORIENTED_EDGE('',*,*,#32588,.T.); +#32745 = ORIENTED_EDGE('',*,*,#32631,.T.); +#32746 = ORIENTED_EDGE('',*,*,#32685,.F.); +#32747 = ORIENTED_EDGE('',*,*,#32727,.T.); +#32748 = ORIENTED_EDGE('',*,*,#32704,.T.); +#32749 = ORIENTED_EDGE('',*,*,#32655,.F.); +#32750 = ORIENTED_EDGE('',*,*,#32605,.F.); +#32751 = FACE_BOUND('',#32752,.T.); +#32752 = EDGE_LOOP('',(#32753,#32764,#32772,#32781,#32789,#32798,#32806, + #32815)); +#32753 = ORIENTED_EDGE('',*,*,#32754,.F.); +#32754 = EDGE_CURVE('',#32755,#32757,#32759,.T.); +#32755 = VERTEX_POINT('',#32756); +#32756 = CARTESIAN_POINT('',(-0.3,-0.23,4.E-02)); +#32757 = VERTEX_POINT('',#32758); +#32758 = CARTESIAN_POINT('',(-0.3,-0.21,2.E-02)); +#32759 = CIRCLE('',#32760,2.E-02); +#32760 = AXIS2_PLACEMENT_3D('',#32761,#32762,#32763); +#32761 = CARTESIAN_POINT('',(-0.3,-0.21,4.E-02)); +#32762 = DIRECTION('',(1.,0.,-0.)); +#32763 = DIRECTION('',(0.,0.,1.)); +#32764 = ORIENTED_EDGE('',*,*,#32765,.T.); +#32765 = EDGE_CURVE('',#32755,#32766,#32768,.T.); +#32766 = VERTEX_POINT('',#32767); +#32767 = CARTESIAN_POINT('',(-0.3,-0.23,0.46)); +#32768 = LINE('',#32769,#32770); +#32769 = CARTESIAN_POINT('',(-0.3,-0.23,2.E-02)); +#32770 = VECTOR('',#32771,1.); +#32771 = DIRECTION('',(0.,0.,1.)); +#32772 = ORIENTED_EDGE('',*,*,#32773,.T.); +#32773 = EDGE_CURVE('',#32766,#32774,#32776,.T.); +#32774 = VERTEX_POINT('',#32775); +#32775 = CARTESIAN_POINT('',(-0.3,-0.21,0.48)); +#32776 = CIRCLE('',#32777,2.E-02); +#32777 = AXIS2_PLACEMENT_3D('',#32778,#32779,#32780); +#32778 = CARTESIAN_POINT('',(-0.3,-0.21,0.46)); +#32779 = DIRECTION('',(-1.,0.,0.)); +#32780 = DIRECTION('',(0.,0.,1.)); +#32781 = ORIENTED_EDGE('',*,*,#32782,.T.); +#32782 = EDGE_CURVE('',#32774,#32783,#32785,.T.); +#32783 = VERTEX_POINT('',#32784); +#32784 = CARTESIAN_POINT('',(-0.3,0.21,0.48)); +#32785 = LINE('',#32786,#32787); +#32786 = CARTESIAN_POINT('',(-0.3,-0.23,0.48)); +#32787 = VECTOR('',#32788,1.); +#32788 = DIRECTION('',(0.,1.,0.)); +#32789 = ORIENTED_EDGE('',*,*,#32790,.F.); +#32790 = EDGE_CURVE('',#32791,#32783,#32793,.T.); +#32791 = VERTEX_POINT('',#32792); +#32792 = CARTESIAN_POINT('',(-0.3,0.23,0.46)); +#32793 = CIRCLE('',#32794,2.E-02); +#32794 = AXIS2_PLACEMENT_3D('',#32795,#32796,#32797); +#32795 = CARTESIAN_POINT('',(-0.3,0.21,0.46)); +#32796 = DIRECTION('',(1.,0.,-0.)); +#32797 = DIRECTION('',(0.,0.,1.)); +#32798 = ORIENTED_EDGE('',*,*,#32799,.F.); +#32799 = EDGE_CURVE('',#32800,#32791,#32802,.T.); +#32800 = VERTEX_POINT('',#32801); +#32801 = CARTESIAN_POINT('',(-0.3,0.23,4.E-02)); +#32802 = LINE('',#32803,#32804); +#32803 = CARTESIAN_POINT('',(-0.3,0.23,2.E-02)); +#32804 = VECTOR('',#32805,1.); +#32805 = DIRECTION('',(0.,0.,1.)); +#32806 = ORIENTED_EDGE('',*,*,#32807,.T.); +#32807 = EDGE_CURVE('',#32800,#32808,#32810,.T.); +#32808 = VERTEX_POINT('',#32809); +#32809 = CARTESIAN_POINT('',(-0.3,0.21,2.E-02)); +#32810 = CIRCLE('',#32811,2.E-02); +#32811 = AXIS2_PLACEMENT_3D('',#32812,#32813,#32814); +#32812 = CARTESIAN_POINT('',(-0.3,0.21,4.E-02)); +#32813 = DIRECTION('',(-1.,0.,0.)); +#32814 = DIRECTION('',(0.,0.,1.)); +#32815 = ORIENTED_EDGE('',*,*,#32816,.F.); +#32816 = EDGE_CURVE('',#32757,#32808,#32817,.T.); +#32817 = LINE('',#32818,#32819); +#32818 = CARTESIAN_POINT('',(-0.3,-0.23,2.E-02)); +#32819 = VECTOR('',#32820,1.); +#32820 = DIRECTION('',(0.,1.,0.)); +#32821 = PLANE('',#32822); +#32822 = AXIS2_PLACEMENT_3D('',#32823,#32824,#32825); +#32823 = CARTESIAN_POINT('',(-0.3,-0.25,0.)); +#32824 = DIRECTION('',(1.,0.,0.)); +#32825 = DIRECTION('',(0.,0.,1.)); +#32826 = ADVANCED_FACE('',(#32827),#32853,.T.); +#32827 = FACE_BOUND('',#32828,.T.); +#32828 = EDGE_LOOP('',(#32829,#32830,#32838,#32847)); +#32829 = ORIENTED_EDGE('',*,*,#32754,.T.); +#32830 = ORIENTED_EDGE('',*,*,#32831,.T.); +#32831 = EDGE_CURVE('',#32757,#32832,#32834,.T.); +#32832 = VERTEX_POINT('',#32833); +#32833 = CARTESIAN_POINT('',(0.3,-0.21,2.E-02)); +#32834 = LINE('',#32835,#32836); +#32835 = CARTESIAN_POINT('',(-0.3,-0.21,2.E-02)); +#32836 = VECTOR('',#32837,1.); +#32837 = DIRECTION('',(1.,0.,0.)); +#32838 = ORIENTED_EDGE('',*,*,#32839,.F.); +#32839 = EDGE_CURVE('',#32840,#32832,#32842,.T.); +#32840 = VERTEX_POINT('',#32841); +#32841 = CARTESIAN_POINT('',(0.3,-0.23,4.E-02)); +#32842 = CIRCLE('',#32843,2.E-02); +#32843 = AXIS2_PLACEMENT_3D('',#32844,#32845,#32846); +#32844 = CARTESIAN_POINT('',(0.3,-0.21,4.E-02)); +#32845 = DIRECTION('',(1.,0.,-0.)); +#32846 = DIRECTION('',(0.,0.,1.)); +#32847 = ORIENTED_EDGE('',*,*,#32848,.F.); +#32848 = EDGE_CURVE('',#32755,#32840,#32849,.T.); +#32849 = LINE('',#32850,#32851); +#32850 = CARTESIAN_POINT('',(-0.3,-0.23,4.E-02)); +#32851 = VECTOR('',#32852,1.); +#32852 = DIRECTION('',(1.,0.,0.)); +#32853 = CYLINDRICAL_SURFACE('',#32854,2.E-02); +#32854 = AXIS2_PLACEMENT_3D('',#32855,#32856,#32857); +#32855 = CARTESIAN_POINT('',(-0.3,-0.21,4.E-02)); +#32856 = DIRECTION('',(1.,0.,0.)); +#32857 = DIRECTION('',(0.,-1.,0.)); +#32858 = ADVANCED_FACE('',(#32859),#32877,.F.); +#32859 = FACE_BOUND('',#32860,.F.); +#32860 = EDGE_LOOP('',(#32861,#32862,#32863,#32871)); +#32861 = ORIENTED_EDGE('',*,*,#32816,.F.); +#32862 = ORIENTED_EDGE('',*,*,#32831,.T.); +#32863 = ORIENTED_EDGE('',*,*,#32864,.T.); +#32864 = EDGE_CURVE('',#32832,#32865,#32867,.T.); +#32865 = VERTEX_POINT('',#32866); +#32866 = CARTESIAN_POINT('',(0.3,0.21,2.E-02)); +#32867 = LINE('',#32868,#32869); +#32868 = CARTESIAN_POINT('',(0.3,-0.23,2.E-02)); +#32869 = VECTOR('',#32870,1.); +#32870 = DIRECTION('',(0.,1.,0.)); +#32871 = ORIENTED_EDGE('',*,*,#32872,.F.); +#32872 = EDGE_CURVE('',#32808,#32865,#32873,.T.); +#32873 = LINE('',#32874,#32875); +#32874 = CARTESIAN_POINT('',(-0.3,0.21,2.E-02)); +#32875 = VECTOR('',#32876,1.); +#32876 = DIRECTION('',(1.,0.,0.)); +#32877 = PLANE('',#32878); +#32878 = AXIS2_PLACEMENT_3D('',#32879,#32880,#32881); +#32879 = CARTESIAN_POINT('',(-0.3,-0.23,2.E-02)); +#32880 = DIRECTION('',(0.,0.,1.)); +#32881 = DIRECTION('',(1.,0.,-0.)); +#32882 = ADVANCED_FACE('',(#32883),#32902,.T.); +#32883 = FACE_BOUND('',#32884,.T.); +#32884 = EDGE_LOOP('',(#32885,#32893,#32900,#32901)); +#32885 = ORIENTED_EDGE('',*,*,#32886,.T.); +#32886 = EDGE_CURVE('',#32800,#32887,#32889,.T.); +#32887 = VERTEX_POINT('',#32888); +#32888 = CARTESIAN_POINT('',(0.3,0.23,4.E-02)); +#32889 = LINE('',#32890,#32891); +#32890 = CARTESIAN_POINT('',(-0.3,0.23,4.E-02)); +#32891 = VECTOR('',#32892,1.); +#32892 = DIRECTION('',(1.,0.,0.)); +#32893 = ORIENTED_EDGE('',*,*,#32894,.T.); +#32894 = EDGE_CURVE('',#32887,#32865,#32895,.T.); +#32895 = CIRCLE('',#32896,2.E-02); +#32896 = AXIS2_PLACEMENT_3D('',#32897,#32898,#32899); +#32897 = CARTESIAN_POINT('',(0.3,0.21,4.E-02)); +#32898 = DIRECTION('',(-1.,0.,0.)); +#32899 = DIRECTION('',(0.,0.,1.)); +#32900 = ORIENTED_EDGE('',*,*,#32872,.F.); +#32901 = ORIENTED_EDGE('',*,*,#32807,.F.); +#32902 = CYLINDRICAL_SURFACE('',#32903,2.E-02); +#32903 = AXIS2_PLACEMENT_3D('',#32904,#32905,#32906); +#32904 = CARTESIAN_POINT('',(-0.3,0.21,4.E-02)); +#32905 = DIRECTION('',(1.,0.,0.)); +#32906 = DIRECTION('',(-0.,1.,0.)); +#32907 = ADVANCED_FACE('',(#32908),#32926,.T.); +#32908 = FACE_BOUND('',#32909,.T.); +#32909 = EDGE_LOOP('',(#32910,#32918,#32919,#32920)); +#32910 = ORIENTED_EDGE('',*,*,#32911,.F.); +#32911 = EDGE_CURVE('',#32887,#32912,#32914,.T.); +#32912 = VERTEX_POINT('',#32913); +#32913 = CARTESIAN_POINT('',(0.3,0.23,0.46)); +#32914 = LINE('',#32915,#32916); +#32915 = CARTESIAN_POINT('',(0.3,0.23,2.E-02)); +#32916 = VECTOR('',#32917,1.); +#32917 = DIRECTION('',(0.,0.,1.)); +#32918 = ORIENTED_EDGE('',*,*,#32886,.F.); +#32919 = ORIENTED_EDGE('',*,*,#32799,.T.); +#32920 = ORIENTED_EDGE('',*,*,#32921,.T.); +#32921 = EDGE_CURVE('',#32791,#32912,#32922,.T.); +#32922 = LINE('',#32923,#32924); +#32923 = CARTESIAN_POINT('',(-0.3,0.23,0.46)); +#32924 = VECTOR('',#32925,1.); +#32925 = DIRECTION('',(1.,0.,0.)); +#32926 = PLANE('',#32927); +#32927 = AXIS2_PLACEMENT_3D('',#32928,#32929,#32930); +#32928 = CARTESIAN_POINT('',(-0.3,0.23,2.E-02)); +#32929 = DIRECTION('',(0.,1.,0.)); +#32930 = DIRECTION('',(0.,-0.,1.)); +#32931 = ADVANCED_FACE('',(#32932),#32951,.T.); +#32932 = FACE_BOUND('',#32933,.T.); +#32933 = EDGE_LOOP('',(#32934,#32935,#32943,#32950)); +#32934 = ORIENTED_EDGE('',*,*,#32790,.T.); +#32935 = ORIENTED_EDGE('',*,*,#32936,.T.); +#32936 = EDGE_CURVE('',#32783,#32937,#32939,.T.); +#32937 = VERTEX_POINT('',#32938); +#32938 = CARTESIAN_POINT('',(0.3,0.21,0.48)); +#32939 = LINE('',#32940,#32941); +#32940 = CARTESIAN_POINT('',(-0.3,0.21,0.48)); +#32941 = VECTOR('',#32942,1.); +#32942 = DIRECTION('',(1.,0.,0.)); +#32943 = ORIENTED_EDGE('',*,*,#32944,.F.); +#32944 = EDGE_CURVE('',#32912,#32937,#32945,.T.); +#32945 = CIRCLE('',#32946,2.E-02); +#32946 = AXIS2_PLACEMENT_3D('',#32947,#32948,#32949); +#32947 = CARTESIAN_POINT('',(0.3,0.21,0.46)); +#32948 = DIRECTION('',(1.,0.,-0.)); +#32949 = DIRECTION('',(0.,0.,1.)); +#32950 = ORIENTED_EDGE('',*,*,#32921,.F.); +#32951 = CYLINDRICAL_SURFACE('',#32952,2.E-02); +#32952 = AXIS2_PLACEMENT_3D('',#32953,#32954,#32955); +#32953 = CARTESIAN_POINT('',(-0.3,0.21,0.46)); +#32954 = DIRECTION('',(1.,0.,0.)); +#32955 = DIRECTION('',(-0.,1.,0.)); +#32956 = ADVANCED_FACE('',(#32957),#32975,.T.); +#32957 = FACE_BOUND('',#32958,.T.); +#32958 = EDGE_LOOP('',(#32959,#32960,#32968,#32974)); +#32959 = ORIENTED_EDGE('',*,*,#32782,.F.); +#32960 = ORIENTED_EDGE('',*,*,#32961,.T.); +#32961 = EDGE_CURVE('',#32774,#32962,#32964,.T.); +#32962 = VERTEX_POINT('',#32963); +#32963 = CARTESIAN_POINT('',(0.3,-0.21,0.48)); +#32964 = LINE('',#32965,#32966); +#32965 = CARTESIAN_POINT('',(-0.3,-0.21,0.48)); +#32966 = VECTOR('',#32967,1.); +#32967 = DIRECTION('',(1.,0.,0.)); +#32968 = ORIENTED_EDGE('',*,*,#32969,.T.); +#32969 = EDGE_CURVE('',#32962,#32937,#32970,.T.); +#32970 = LINE('',#32971,#32972); +#32971 = CARTESIAN_POINT('',(0.3,-0.23,0.48)); +#32972 = VECTOR('',#32973,1.); +#32973 = DIRECTION('',(0.,1.,0.)); +#32974 = ORIENTED_EDGE('',*,*,#32936,.F.); +#32975 = PLANE('',#32976); +#32976 = AXIS2_PLACEMENT_3D('',#32977,#32978,#32979); +#32977 = CARTESIAN_POINT('',(-0.3,-0.23,0.48)); +#32978 = DIRECTION('',(0.,0.,1.)); +#32979 = DIRECTION('',(1.,0.,-0.)); +#32980 = ADVANCED_FACE('',(#32981),#33000,.T.); +#32981 = FACE_BOUND('',#32982,.T.); +#32982 = EDGE_LOOP('',(#32983,#32991,#32998,#32999)); +#32983 = ORIENTED_EDGE('',*,*,#32984,.T.); +#32984 = EDGE_CURVE('',#32766,#32985,#32987,.T.); +#32985 = VERTEX_POINT('',#32986); +#32986 = CARTESIAN_POINT('',(0.3,-0.23,0.46)); +#32987 = LINE('',#32988,#32989); +#32988 = CARTESIAN_POINT('',(-0.3,-0.23,0.46)); +#32989 = VECTOR('',#32990,1.); +#32990 = DIRECTION('',(1.,0.,0.)); +#32991 = ORIENTED_EDGE('',*,*,#32992,.T.); +#32992 = EDGE_CURVE('',#32985,#32962,#32993,.T.); +#32993 = CIRCLE('',#32994,2.E-02); +#32994 = AXIS2_PLACEMENT_3D('',#32995,#32996,#32997); +#32995 = CARTESIAN_POINT('',(0.3,-0.21,0.46)); +#32996 = DIRECTION('',(-1.,0.,0.)); +#32997 = DIRECTION('',(0.,0.,1.)); +#32998 = ORIENTED_EDGE('',*,*,#32961,.F.); +#32999 = ORIENTED_EDGE('',*,*,#32773,.F.); +#33000 = CYLINDRICAL_SURFACE('',#33001,2.E-02); +#33001 = AXIS2_PLACEMENT_3D('',#33002,#33003,#33004); +#33002 = CARTESIAN_POINT('',(-0.3,-0.21,0.46)); +#33003 = DIRECTION('',(1.,0.,0.)); +#33004 = DIRECTION('',(0.,-1.,0.)); +#33005 = ADVANCED_FACE('',(#33006),#33017,.F.); +#33006 = FACE_BOUND('',#33007,.F.); +#33007 = EDGE_LOOP('',(#33008,#33014,#33015,#33016)); +#33008 = ORIENTED_EDGE('',*,*,#33009,.F.); +#33009 = EDGE_CURVE('',#32840,#32985,#33010,.T.); +#33010 = LINE('',#33011,#33012); +#33011 = CARTESIAN_POINT('',(0.3,-0.23,2.E-02)); +#33012 = VECTOR('',#33013,1.); +#33013 = DIRECTION('',(0.,0.,1.)); +#33014 = ORIENTED_EDGE('',*,*,#32848,.F.); +#33015 = ORIENTED_EDGE('',*,*,#32765,.T.); +#33016 = ORIENTED_EDGE('',*,*,#32984,.T.); +#33017 = PLANE('',#33018); +#33018 = AXIS2_PLACEMENT_3D('',#33019,#33020,#33021); +#33019 = CARTESIAN_POINT('',(-0.3,-0.23,2.E-02)); +#33020 = DIRECTION('',(0.,1.,0.)); +#33021 = DIRECTION('',(0.,-0.,1.)); +#33022 = ADVANCED_FACE('',(#33023,#33093),#33103,.F.); +#33023 = FACE_BOUND('',#33024,.F.); +#33024 = EDGE_LOOP('',(#33025,#33035,#33044,#33052,#33061,#33069,#33078, + #33086)); +#33025 = ORIENTED_EDGE('',*,*,#33026,.F.); +#33026 = EDGE_CURVE('',#33027,#33029,#33031,.T.); +#33027 = VERTEX_POINT('',#33028); +#33028 = CARTESIAN_POINT('',(0.3,-0.25,2.E-02)); +#33029 = VERTEX_POINT('',#33030); +#33030 = CARTESIAN_POINT('',(0.3,-0.25,0.48)); +#33031 = LINE('',#33032,#33033); +#33032 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#33033 = VECTOR('',#33034,1.); +#33034 = DIRECTION('',(0.,0.,1.)); +#33035 = ORIENTED_EDGE('',*,*,#33036,.T.); +#33036 = EDGE_CURVE('',#33027,#33037,#33039,.T.); +#33037 = VERTEX_POINT('',#33038); +#33038 = CARTESIAN_POINT('',(0.3,-0.23,0.)); +#33039 = CIRCLE('',#33040,2.E-02); +#33040 = AXIS2_PLACEMENT_3D('',#33041,#33042,#33043); +#33041 = CARTESIAN_POINT('',(0.3,-0.23,2.E-02)); +#33042 = DIRECTION('',(1.,0.,-0.)); +#33043 = DIRECTION('',(0.,0.,1.)); +#33044 = ORIENTED_EDGE('',*,*,#33045,.T.); +#33045 = EDGE_CURVE('',#33037,#33046,#33048,.T.); +#33046 = VERTEX_POINT('',#33047); +#33047 = CARTESIAN_POINT('',(0.3,0.23,0.)); +#33048 = LINE('',#33049,#33050); +#33049 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#33050 = VECTOR('',#33051,1.); +#33051 = DIRECTION('',(0.,1.,0.)); +#33052 = ORIENTED_EDGE('',*,*,#33053,.F.); +#33053 = EDGE_CURVE('',#33054,#33046,#33056,.T.); +#33054 = VERTEX_POINT('',#33055); +#33055 = CARTESIAN_POINT('',(0.3,0.25,2.E-02)); +#33056 = CIRCLE('',#33057,2.E-02); +#33057 = AXIS2_PLACEMENT_3D('',#33058,#33059,#33060); +#33058 = CARTESIAN_POINT('',(0.3,0.23,2.E-02)); +#33059 = DIRECTION('',(-1.,0.,0.)); +#33060 = DIRECTION('',(0.,0.,1.)); +#33061 = ORIENTED_EDGE('',*,*,#33062,.T.); +#33062 = EDGE_CURVE('',#33054,#33063,#33065,.T.); +#33063 = VERTEX_POINT('',#33064); +#33064 = CARTESIAN_POINT('',(0.3,0.25,0.48)); +#33065 = LINE('',#33066,#33067); +#33066 = CARTESIAN_POINT('',(0.3,0.25,0.)); +#33067 = VECTOR('',#33068,1.); +#33068 = DIRECTION('',(0.,0.,1.)); +#33069 = ORIENTED_EDGE('',*,*,#33070,.T.); +#33070 = EDGE_CURVE('',#33063,#33071,#33073,.T.); +#33071 = VERTEX_POINT('',#33072); +#33072 = CARTESIAN_POINT('',(0.3,0.23,0.5)); +#33073 = CIRCLE('',#33074,2.E-02); +#33074 = AXIS2_PLACEMENT_3D('',#33075,#33076,#33077); +#33075 = CARTESIAN_POINT('',(0.3,0.23,0.48)); +#33076 = DIRECTION('',(1.,0.,-0.)); +#33077 = DIRECTION('',(0.,0.,1.)); +#33078 = ORIENTED_EDGE('',*,*,#33079,.F.); +#33079 = EDGE_CURVE('',#33080,#33071,#33082,.T.); +#33080 = VERTEX_POINT('',#33081); +#33081 = CARTESIAN_POINT('',(0.3,-0.23,0.5)); +#33082 = LINE('',#33083,#33084); +#33083 = CARTESIAN_POINT('',(0.3,-0.25,0.5)); +#33084 = VECTOR('',#33085,1.); +#33085 = DIRECTION('',(0.,1.,0.)); +#33086 = ORIENTED_EDGE('',*,*,#33087,.F.); +#33087 = EDGE_CURVE('',#33029,#33080,#33088,.T.); +#33088 = CIRCLE('',#33089,2.E-02); +#33089 = AXIS2_PLACEMENT_3D('',#33090,#33091,#33092); +#33090 = CARTESIAN_POINT('',(0.3,-0.23,0.48)); +#33091 = DIRECTION('',(-1.,0.,0.)); +#33092 = DIRECTION('',(0.,0.,1.)); +#33093 = FACE_BOUND('',#33094,.F.); +#33094 = EDGE_LOOP('',(#33095,#33096,#33097,#33098,#33099,#33100,#33101, + #33102)); +#33095 = ORIENTED_EDGE('',*,*,#32839,.F.); +#33096 = ORIENTED_EDGE('',*,*,#33009,.T.); +#33097 = ORIENTED_EDGE('',*,*,#32992,.T.); +#33098 = ORIENTED_EDGE('',*,*,#32969,.T.); +#33099 = ORIENTED_EDGE('',*,*,#32944,.F.); +#33100 = ORIENTED_EDGE('',*,*,#32911,.F.); +#33101 = ORIENTED_EDGE('',*,*,#32894,.T.); +#33102 = ORIENTED_EDGE('',*,*,#32864,.F.); +#33103 = PLANE('',#33104); +#33104 = AXIS2_PLACEMENT_3D('',#33105,#33106,#33107); +#33105 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#33106 = DIRECTION('',(1.,0.,0.)); +#33107 = DIRECTION('',(0.,0.,1.)); +#33108 = ADVANCED_FACE('',(#33109),#33134,.F.); +#33109 = FACE_BOUND('',#33110,.F.); +#33110 = EDGE_LOOP('',(#33111,#33121,#33127,#33128)); +#33111 = ORIENTED_EDGE('',*,*,#33112,.F.); +#33112 = EDGE_CURVE('',#33113,#33115,#33117,.T.); +#33113 = VERTEX_POINT('',#33114); +#33114 = CARTESIAN_POINT('',(0.5,-0.25,2.E-02)); +#33115 = VERTEX_POINT('',#33116); +#33116 = CARTESIAN_POINT('',(0.5,-0.25,0.48)); +#33117 = LINE('',#33118,#33119); +#33118 = CARTESIAN_POINT('',(0.5,-0.25,0.)); +#33119 = VECTOR('',#33120,1.); +#33120 = DIRECTION('',(0.,0.,1.)); +#33121 = ORIENTED_EDGE('',*,*,#33122,.F.); +#33122 = EDGE_CURVE('',#33027,#33113,#33123,.T.); +#33123 = LINE('',#33124,#33125); +#33124 = CARTESIAN_POINT('',(0.3,-0.25,2.E-02)); +#33125 = VECTOR('',#33126,1.); +#33126 = DIRECTION('',(1.,0.,0.)); +#33127 = ORIENTED_EDGE('',*,*,#33026,.T.); +#33128 = ORIENTED_EDGE('',*,*,#33129,.T.); +#33129 = EDGE_CURVE('',#33029,#33115,#33130,.T.); +#33130 = LINE('',#33131,#33132); +#33131 = CARTESIAN_POINT('',(0.3,-0.25,0.48)); +#33132 = VECTOR('',#33133,1.); +#33133 = DIRECTION('',(1.,0.,0.)); +#33134 = PLANE('',#33135); +#33135 = AXIS2_PLACEMENT_3D('',#33136,#33137,#33138); +#33136 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#33137 = DIRECTION('',(0.,1.,0.)); +#33138 = DIRECTION('',(0.,-0.,1.)); +#33139 = ADVANCED_FACE('',(#33140),#33159,.T.); +#33140 = FACE_BOUND('',#33141,.T.); +#33141 = EDGE_LOOP('',(#33142,#33143,#33151,#33158)); +#33142 = ORIENTED_EDGE('',*,*,#33036,.T.); +#33143 = ORIENTED_EDGE('',*,*,#33144,.T.); +#33144 = EDGE_CURVE('',#33037,#33145,#33147,.T.); +#33145 = VERTEX_POINT('',#33146); +#33146 = CARTESIAN_POINT('',(0.5,-0.23,0.)); +#33147 = LINE('',#33148,#33149); +#33148 = CARTESIAN_POINT('',(0.3,-0.23,0.)); +#33149 = VECTOR('',#33150,1.); +#33150 = DIRECTION('',(1.,0.,0.)); +#33151 = ORIENTED_EDGE('',*,*,#33152,.F.); +#33152 = EDGE_CURVE('',#33113,#33145,#33153,.T.); +#33153 = CIRCLE('',#33154,2.E-02); +#33154 = AXIS2_PLACEMENT_3D('',#33155,#33156,#33157); +#33155 = CARTESIAN_POINT('',(0.5,-0.23,2.E-02)); +#33156 = DIRECTION('',(1.,0.,-0.)); +#33157 = DIRECTION('',(0.,0.,1.)); +#33158 = ORIENTED_EDGE('',*,*,#33122,.F.); +#33159 = CYLINDRICAL_SURFACE('',#33160,2.E-02); +#33160 = AXIS2_PLACEMENT_3D('',#33161,#33162,#33163); +#33161 = CARTESIAN_POINT('',(0.3,-0.23,2.E-02)); +#33162 = DIRECTION('',(1.,0.,0.)); +#33163 = DIRECTION('',(0.,-1.,0.)); +#33164 = ADVANCED_FACE('',(#33165),#33184,.T.); +#33165 = FACE_BOUND('',#33166,.T.); +#33166 = EDGE_LOOP('',(#33167,#33168,#33177,#33183)); +#33167 = ORIENTED_EDGE('',*,*,#33129,.T.); +#33168 = ORIENTED_EDGE('',*,*,#33169,.T.); +#33169 = EDGE_CURVE('',#33115,#33170,#33172,.T.); +#33170 = VERTEX_POINT('',#33171); +#33171 = CARTESIAN_POINT('',(0.5,-0.23,0.5)); +#33172 = CIRCLE('',#33173,2.E-02); +#33173 = AXIS2_PLACEMENT_3D('',#33174,#33175,#33176); +#33174 = CARTESIAN_POINT('',(0.5,-0.23,0.48)); +#33175 = DIRECTION('',(-1.,0.,0.)); +#33176 = DIRECTION('',(0.,0.,1.)); +#33177 = ORIENTED_EDGE('',*,*,#33178,.F.); +#33178 = EDGE_CURVE('',#33080,#33170,#33179,.T.); +#33179 = LINE('',#33180,#33181); +#33180 = CARTESIAN_POINT('',(0.3,-0.23,0.5)); +#33181 = VECTOR('',#33182,1.); +#33182 = DIRECTION('',(1.,0.,0.)); +#33183 = ORIENTED_EDGE('',*,*,#33087,.F.); +#33184 = CYLINDRICAL_SURFACE('',#33185,2.E-02); +#33185 = AXIS2_PLACEMENT_3D('',#33186,#33187,#33188); +#33186 = CARTESIAN_POINT('',(0.3,-0.23,0.48)); +#33187 = DIRECTION('',(1.,0.,0.)); +#33188 = DIRECTION('',(0.,-1.,0.)); +#33189 = ADVANCED_FACE('',(#33190),#33208,.F.); +#33190 = FACE_BOUND('',#33191,.F.); +#33191 = EDGE_LOOP('',(#33192,#33193,#33194,#33202)); +#33192 = ORIENTED_EDGE('',*,*,#33045,.F.); +#33193 = ORIENTED_EDGE('',*,*,#33144,.T.); +#33194 = ORIENTED_EDGE('',*,*,#33195,.T.); +#33195 = EDGE_CURVE('',#33145,#33196,#33198,.T.); +#33196 = VERTEX_POINT('',#33197); +#33197 = CARTESIAN_POINT('',(0.5,0.23,0.)); +#33198 = LINE('',#33199,#33200); +#33199 = CARTESIAN_POINT('',(0.5,-0.25,0.)); +#33200 = VECTOR('',#33201,1.); +#33201 = DIRECTION('',(0.,1.,0.)); +#33202 = ORIENTED_EDGE('',*,*,#33203,.F.); +#33203 = EDGE_CURVE('',#33046,#33196,#33204,.T.); +#33204 = LINE('',#33205,#33206); +#33205 = CARTESIAN_POINT('',(0.3,0.23,0.)); +#33206 = VECTOR('',#33207,1.); +#33207 = DIRECTION('',(1.,0.,0.)); +#33208 = PLANE('',#33209); +#33209 = AXIS2_PLACEMENT_3D('',#33210,#33211,#33212); +#33210 = CARTESIAN_POINT('',(0.3,-0.25,0.)); +#33211 = DIRECTION('',(0.,0.,1.)); +#33212 = DIRECTION('',(1.,0.,-0.)); +#33213 = ADVANCED_FACE('',(#33214),#33232,.T.); +#33214 = FACE_BOUND('',#33215,.T.); +#33215 = EDGE_LOOP('',(#33216,#33217,#33218,#33226)); +#33216 = ORIENTED_EDGE('',*,*,#33079,.F.); +#33217 = ORIENTED_EDGE('',*,*,#33178,.T.); +#33218 = ORIENTED_EDGE('',*,*,#33219,.T.); +#33219 = EDGE_CURVE('',#33170,#33220,#33222,.T.); +#33220 = VERTEX_POINT('',#33221); +#33221 = CARTESIAN_POINT('',(0.5,0.23,0.5)); +#33222 = LINE('',#33223,#33224); +#33223 = CARTESIAN_POINT('',(0.5,-0.25,0.5)); +#33224 = VECTOR('',#33225,1.); +#33225 = DIRECTION('',(0.,1.,0.)); +#33226 = ORIENTED_EDGE('',*,*,#33227,.F.); +#33227 = EDGE_CURVE('',#33071,#33220,#33228,.T.); +#33228 = LINE('',#33229,#33230); +#33229 = CARTESIAN_POINT('',(0.3,0.23,0.5)); +#33230 = VECTOR('',#33231,1.); +#33231 = DIRECTION('',(1.,0.,0.)); +#33232 = PLANE('',#33233); +#33233 = AXIS2_PLACEMENT_3D('',#33234,#33235,#33236); +#33234 = CARTESIAN_POINT('',(0.3,-0.25,0.5)); +#33235 = DIRECTION('',(0.,0.,1.)); +#33236 = DIRECTION('',(1.,0.,-0.)); +#33237 = ADVANCED_FACE('',(#33238),#33257,.T.); +#33238 = FACE_BOUND('',#33239,.T.); +#33239 = EDGE_LOOP('',(#33240,#33248,#33255,#33256)); +#33240 = ORIENTED_EDGE('',*,*,#33241,.T.); +#33241 = EDGE_CURVE('',#33054,#33242,#33244,.T.); +#33242 = VERTEX_POINT('',#33243); +#33243 = CARTESIAN_POINT('',(0.5,0.25,2.E-02)); +#33244 = LINE('',#33245,#33246); +#33245 = CARTESIAN_POINT('',(0.3,0.25,2.E-02)); +#33246 = VECTOR('',#33247,1.); +#33247 = DIRECTION('',(1.,0.,0.)); +#33248 = ORIENTED_EDGE('',*,*,#33249,.T.); +#33249 = EDGE_CURVE('',#33242,#33196,#33250,.T.); +#33250 = CIRCLE('',#33251,2.E-02); +#33251 = AXIS2_PLACEMENT_3D('',#33252,#33253,#33254); +#33252 = CARTESIAN_POINT('',(0.5,0.23,2.E-02)); +#33253 = DIRECTION('',(-1.,0.,0.)); +#33254 = DIRECTION('',(0.,0.,1.)); +#33255 = ORIENTED_EDGE('',*,*,#33203,.F.); +#33256 = ORIENTED_EDGE('',*,*,#33053,.F.); +#33257 = CYLINDRICAL_SURFACE('',#33258,2.E-02); +#33258 = AXIS2_PLACEMENT_3D('',#33259,#33260,#33261); +#33259 = CARTESIAN_POINT('',(0.3,0.23,2.E-02)); +#33260 = DIRECTION('',(1.,0.,0.)); +#33261 = DIRECTION('',(-0.,1.,0.)); +#33262 = ADVANCED_FACE('',(#33263),#33282,.T.); +#33263 = FACE_BOUND('',#33264,.T.); +#33264 = EDGE_LOOP('',(#33265,#33266,#33267,#33276)); +#33265 = ORIENTED_EDGE('',*,*,#33070,.T.); +#33266 = ORIENTED_EDGE('',*,*,#33227,.T.); +#33267 = ORIENTED_EDGE('',*,*,#33268,.F.); +#33268 = EDGE_CURVE('',#33269,#33220,#33271,.T.); +#33269 = VERTEX_POINT('',#33270); +#33270 = CARTESIAN_POINT('',(0.5,0.25,0.48)); +#33271 = CIRCLE('',#33272,2.E-02); +#33272 = AXIS2_PLACEMENT_3D('',#33273,#33274,#33275); +#33273 = CARTESIAN_POINT('',(0.5,0.23,0.48)); +#33274 = DIRECTION('',(1.,0.,-0.)); +#33275 = DIRECTION('',(0.,0.,1.)); +#33276 = ORIENTED_EDGE('',*,*,#33277,.F.); +#33277 = EDGE_CURVE('',#33063,#33269,#33278,.T.); +#33278 = LINE('',#33279,#33280); +#33279 = CARTESIAN_POINT('',(0.3,0.25,0.48)); +#33280 = VECTOR('',#33281,1.); +#33281 = DIRECTION('',(1.,0.,0.)); +#33282 = CYLINDRICAL_SURFACE('',#33283,2.E-02); +#33283 = AXIS2_PLACEMENT_3D('',#33284,#33285,#33286); +#33284 = CARTESIAN_POINT('',(0.3,0.23,0.48)); +#33285 = DIRECTION('',(1.,0.,0.)); +#33286 = DIRECTION('',(-0.,1.,0.)); +#33287 = ADVANCED_FACE('',(#33288),#33299,.T.); +#33288 = FACE_BOUND('',#33289,.T.); +#33289 = EDGE_LOOP('',(#33290,#33296,#33297,#33298)); +#33290 = ORIENTED_EDGE('',*,*,#33291,.F.); +#33291 = EDGE_CURVE('',#33242,#33269,#33292,.T.); +#33292 = LINE('',#33293,#33294); +#33293 = CARTESIAN_POINT('',(0.5,0.25,0.)); +#33294 = VECTOR('',#33295,1.); +#33295 = DIRECTION('',(0.,0.,1.)); +#33296 = ORIENTED_EDGE('',*,*,#33241,.F.); +#33297 = ORIENTED_EDGE('',*,*,#33062,.T.); +#33298 = ORIENTED_EDGE('',*,*,#33277,.T.); +#33299 = PLANE('',#33300); +#33300 = AXIS2_PLACEMENT_3D('',#33301,#33302,#33303); +#33301 = CARTESIAN_POINT('',(0.3,0.25,0.)); +#33302 = DIRECTION('',(0.,1.,0.)); +#33303 = DIRECTION('',(0.,-0.,1.)); +#33304 = ADVANCED_FACE('',(#33305),#33315,.T.); +#33305 = FACE_BOUND('',#33306,.T.); +#33306 = EDGE_LOOP('',(#33307,#33308,#33309,#33310,#33311,#33312,#33313, + #33314)); +#33307 = ORIENTED_EDGE('',*,*,#33112,.F.); +#33308 = ORIENTED_EDGE('',*,*,#33152,.T.); +#33309 = ORIENTED_EDGE('',*,*,#33195,.T.); +#33310 = ORIENTED_EDGE('',*,*,#33249,.F.); +#33311 = ORIENTED_EDGE('',*,*,#33291,.T.); +#33312 = ORIENTED_EDGE('',*,*,#33268,.T.); +#33313 = ORIENTED_EDGE('',*,*,#33219,.F.); +#33314 = ORIENTED_EDGE('',*,*,#33169,.F.); +#33315 = PLANE('',#33316); +#33316 = AXIS2_PLACEMENT_3D('',#33317,#33318,#33319); +#33317 = CARTESIAN_POINT('',(0.5,-0.25,0.)); +#33318 = DIRECTION('',(1.,0.,0.)); +#33319 = DIRECTION('',(0.,0.,1.)); +#33320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#33324)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#33321,#33322,#33323)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#33321 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#33322 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#33323 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#33324 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#33321, + 'distance_accuracy_value','confusion accuracy'); +#33325 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33326,#33328); +#33326 = ( REPRESENTATION_RELATIONSHIP('','',#32465,#32442) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33327) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33327 = ITEM_DEFINED_TRANSFORMATION('','',#11,#32443); +#33328 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33329); +#33329 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','=>[0:1:1:16]','',#32437, + #32460,$); +#33330 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#32462)); +#33331 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33332,#33334); +#33332 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33333) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33333 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#33334 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33335); +#33335 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','SW_MACRO6','',#5,#12150,$ + ); +#33336 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33337,#33339); +#33337 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33338) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33338 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#33339 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33340); +#33340 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','C_RGB1','',#5,#32437,$); +#33341 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33342,#33344); +#33342 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33343) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33343 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#33344 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33345); +#33345 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','SW_MACRO3','',#5,#12150,$ + ); +#33346 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33347,#33349); +#33347 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33348) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33348 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#33349 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33350); +#33350 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','C_XBEE_VCC1','',#5,#32437, + $); +#33351 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33352,#33354); +#33352 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33353) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33353 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#33354 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33355); +#33355 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','R_XBEE_RC1','',#5,#31605,$ + ); +#33356 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33357,#33359); +#33357 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33358) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33358 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#33359 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33360); +#33360 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','R_USB_DM1','',#5,#31605,$ + ); +#33361 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33362,#33364); +#33362 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33363) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33363 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#33364 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33365); +#33365 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','SW_TRIG_DIG1','',#5,#13558 + ,$); +#33366 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33367,#33369); +#33367 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33368) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33368 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#33369 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33370); +#33370 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','R_EN_PU1','',#5,#31605,$); +#33371 = SHAPE_DEFINITION_REPRESENTATION(#33372,#33378); +#33372 = PRODUCT_DEFINITION_SHAPE('','',#33373); +#33373 = PRODUCT_DEFINITION('design','',#33374,#33377); +#33374 = PRODUCT_DEFINITION_FORMATION('','',#33375); +#33375 = PRODUCT('ESP32-S3-WROOM-1','ESP32-S3-WROOM-1','',(#33376)); +#33376 = PRODUCT_CONTEXT('',#2,'mechanical'); +#33377 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#33378 = SHAPE_REPRESENTATION('',(#11,#33379),#33383); +#33379 = AXIS2_PLACEMENT_3D('',#33380,#33381,#33382); +#33380 = CARTESIAN_POINT('',(0.,0.,0.)); +#33381 = DIRECTION('',(0.,0.,1.)); +#33382 = DIRECTION('',(1.,0.,-0.)); +#33383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#33387)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#33384,#33385,#33386)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#33384 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#33385 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#33386 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#33387 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#33384, + 'distance_accuracy_value','confusion accuracy'); +#33388 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#33389,#33391); +#33389 = ( REPRESENTATION_RELATIONSHIP('','',#33378,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#33390) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#33390 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#33391 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #33392); +#33392 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','U_MCU1','',#5,#33373,$); +#33393 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33375)); +#33394 = SHAPE_DEFINITION_REPRESENTATION(#33395,#33401); +#33395 = PRODUCT_DEFINITION_SHAPE('','',#33396); +#33396 = PRODUCT_DEFINITION('design','',#33397,#33400); +#33397 = PRODUCT_DEFINITION_FORMATION('','',#33398); +#33398 = PRODUCT('ESP32-S3-WROOM-1','ESP32-S3-WROOM-1','',(#33399)); +#33399 = PRODUCT_CONTEXT('',#2,'mechanical'); +#33400 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#33401 = SHAPE_REPRESENTATION('',(#11,#33402,#34344,#47532,#48031,#48509 + ,#48987,#49465,#49943,#50421,#50899,#51377,#51855,#52333,#52811, + #53289,#53767,#54245,#54723,#55201,#55679,#56157,#56635,#57113, + #57591,#58069,#58547,#59025,#59503,#59981,#60459,#60937,#61415, + #61893,#62371,#62849,#63327,#63805,#64283,#64761,#65239,#65717, + #66195,#66673,#67151,#67301,#67451,#67601,#67751,#67901,#68051, + #68201,#68351),#68501); +#33402 = MANIFOLD_SOLID_BREP('',#33403); +#33403 = CLOSED_SHELL('',(#33404,#33444,#33475,#33506,#33537,#33568, + #33599,#33630,#33661,#33692,#33723,#33754,#33785,#33816,#33847, + #33878,#33909,#33940,#33971,#34002,#34033,#34064,#34095,#34126, + #34157,#34188,#34219,#34250,#34272,#34308)); +#33404 = ADVANCED_FACE('',(#33405),#33439,.F.); +#33405 = FACE_BOUND('',#33406,.F.); +#33406 = EDGE_LOOP('',(#33407,#33417,#33425,#33433)); +#33407 = ORIENTED_EDGE('',*,*,#33408,.T.); +#33408 = EDGE_CURVE('',#33409,#33411,#33413,.T.); +#33409 = VERTEX_POINT('',#33410); +#33410 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33411 = VERTEX_POINT('',#33412); +#33412 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#33413 = LINE('',#33414,#33415); +#33414 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33415 = VECTOR('',#33416,1.); +#33416 = DIRECTION('',(0.,0.,1.)); +#33417 = ORIENTED_EDGE('',*,*,#33418,.T.); +#33418 = EDGE_CURVE('',#33411,#33419,#33421,.T.); +#33419 = VERTEX_POINT('',#33420); +#33420 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#33421 = LINE('',#33422,#33423); +#33422 = CARTESIAN_POINT('',(7.5,6.75,1.)); +#33423 = VECTOR('',#33424,1.); +#33424 = DIRECTION('',(0.,1.,0.)); +#33425 = ORIENTED_EDGE('',*,*,#33426,.F.); +#33426 = EDGE_CURVE('',#33427,#33419,#33429,.T.); +#33427 = VERTEX_POINT('',#33428); +#33428 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33429 = LINE('',#33430,#33431); +#33430 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33431 = VECTOR('',#33432,1.); +#33432 = DIRECTION('',(0.,0.,1.)); +#33433 = ORIENTED_EDGE('',*,*,#33434,.F.); +#33434 = EDGE_CURVE('',#33409,#33427,#33435,.T.); +#33435 = LINE('',#33436,#33437); +#33436 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33437 = VECTOR('',#33438,1.); +#33438 = DIRECTION('',(0.,1.,0.)); +#33439 = PLANE('',#33440); +#33440 = AXIS2_PLACEMENT_3D('',#33441,#33442,#33443); +#33441 = CARTESIAN_POINT('',(7.5,6.75,0.8)); +#33442 = DIRECTION('',(-1.,0.,0.)); +#33443 = DIRECTION('',(0.,1.,0.)); +#33444 = ADVANCED_FACE('',(#33445),#33470,.F.); +#33445 = FACE_BOUND('',#33446,.F.); +#33446 = EDGE_LOOP('',(#33447,#33448,#33456,#33464)); +#33447 = ORIENTED_EDGE('',*,*,#33426,.T.); +#33448 = ORIENTED_EDGE('',*,*,#33449,.T.); +#33449 = EDGE_CURVE('',#33419,#33450,#33452,.T.); +#33450 = VERTEX_POINT('',#33451); +#33451 = CARTESIAN_POINT('',(2.,12.25,1.)); +#33452 = LINE('',#33453,#33454); +#33453 = CARTESIAN_POINT('',(7.5,12.25,1.)); +#33454 = VECTOR('',#33455,1.); +#33455 = DIRECTION('',(-1.,0.,0.)); +#33456 = ORIENTED_EDGE('',*,*,#33457,.F.); +#33457 = EDGE_CURVE('',#33458,#33450,#33460,.T.); +#33458 = VERTEX_POINT('',#33459); +#33459 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33460 = LINE('',#33461,#33462); +#33461 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33462 = VECTOR('',#33463,1.); +#33463 = DIRECTION('',(0.,0.,1.)); +#33464 = ORIENTED_EDGE('',*,*,#33465,.F.); +#33465 = EDGE_CURVE('',#33427,#33458,#33466,.T.); +#33466 = LINE('',#33467,#33468); +#33467 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33468 = VECTOR('',#33469,1.); +#33469 = DIRECTION('',(-1.,0.,0.)); +#33470 = PLANE('',#33471); +#33471 = AXIS2_PLACEMENT_3D('',#33472,#33473,#33474); +#33472 = CARTESIAN_POINT('',(7.5,12.25,0.8)); +#33473 = DIRECTION('',(0.,-1.,0.)); +#33474 = DIRECTION('',(-1.,0.,0.)); +#33475 = ADVANCED_FACE('',(#33476),#33501,.F.); +#33476 = FACE_BOUND('',#33477,.F.); +#33477 = EDGE_LOOP('',(#33478,#33479,#33487,#33495)); +#33478 = ORIENTED_EDGE('',*,*,#33457,.T.); +#33479 = ORIENTED_EDGE('',*,*,#33480,.T.); +#33480 = EDGE_CURVE('',#33450,#33481,#33483,.T.); +#33481 = VERTEX_POINT('',#33482); +#33482 = CARTESIAN_POINT('',(2.,9.75,1.)); +#33483 = LINE('',#33484,#33485); +#33484 = CARTESIAN_POINT('',(2.,12.25,1.)); +#33485 = VECTOR('',#33486,1.); +#33486 = DIRECTION('',(0.,-1.,0.)); +#33487 = ORIENTED_EDGE('',*,*,#33488,.F.); +#33488 = EDGE_CURVE('',#33489,#33481,#33491,.T.); +#33489 = VERTEX_POINT('',#33490); +#33490 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33491 = LINE('',#33492,#33493); +#33492 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33493 = VECTOR('',#33494,1.); +#33494 = DIRECTION('',(0.,0.,1.)); +#33495 = ORIENTED_EDGE('',*,*,#33496,.F.); +#33496 = EDGE_CURVE('',#33458,#33489,#33497,.T.); +#33497 = LINE('',#33498,#33499); +#33498 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33499 = VECTOR('',#33500,1.); +#33500 = DIRECTION('',(0.,-1.,0.)); +#33501 = PLANE('',#33502); +#33502 = AXIS2_PLACEMENT_3D('',#33503,#33504,#33505); +#33503 = CARTESIAN_POINT('',(2.,12.25,0.8)); +#33504 = DIRECTION('',(1.,0.,0.)); +#33505 = DIRECTION('',(0.,-1.,0.)); +#33506 = ADVANCED_FACE('',(#33507),#33532,.F.); +#33507 = FACE_BOUND('',#33508,.F.); +#33508 = EDGE_LOOP('',(#33509,#33510,#33518,#33526)); +#33509 = ORIENTED_EDGE('',*,*,#33488,.T.); +#33510 = ORIENTED_EDGE('',*,*,#33511,.T.); +#33511 = EDGE_CURVE('',#33481,#33512,#33514,.T.); +#33512 = VERTEX_POINT('',#33513); +#33513 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#33514 = LINE('',#33515,#33516); +#33515 = CARTESIAN_POINT('',(2.,9.75,1.)); +#33516 = VECTOR('',#33517,1.); +#33517 = DIRECTION('',(-1.,0.,0.)); +#33518 = ORIENTED_EDGE('',*,*,#33519,.F.); +#33519 = EDGE_CURVE('',#33520,#33512,#33522,.T.); +#33520 = VERTEX_POINT('',#33521); +#33521 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33522 = LINE('',#33523,#33524); +#33523 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33524 = VECTOR('',#33525,1.); +#33525 = DIRECTION('',(0.,0.,1.)); +#33526 = ORIENTED_EDGE('',*,*,#33527,.F.); +#33527 = EDGE_CURVE('',#33489,#33520,#33528,.T.); +#33528 = LINE('',#33529,#33530); +#33529 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33530 = VECTOR('',#33531,1.); +#33531 = DIRECTION('',(-1.,0.,0.)); +#33532 = PLANE('',#33533); +#33533 = AXIS2_PLACEMENT_3D('',#33534,#33535,#33536); +#33534 = CARTESIAN_POINT('',(2.,9.75,0.8)); +#33535 = DIRECTION('',(0.,-1.,0.)); +#33536 = DIRECTION('',(-1.,0.,0.)); +#33537 = ADVANCED_FACE('',(#33538),#33563,.F.); +#33538 = FACE_BOUND('',#33539,.F.); +#33539 = EDGE_LOOP('',(#33540,#33541,#33549,#33557)); +#33540 = ORIENTED_EDGE('',*,*,#33519,.T.); +#33541 = ORIENTED_EDGE('',*,*,#33542,.T.); +#33542 = EDGE_CURVE('',#33512,#33543,#33545,.T.); +#33543 = VERTEX_POINT('',#33544); +#33544 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#33545 = LINE('',#33546,#33547); +#33546 = CARTESIAN_POINT('',(0.5,9.75,1.)); +#33547 = VECTOR('',#33548,1.); +#33548 = DIRECTION('',(0.,1.,0.)); +#33549 = ORIENTED_EDGE('',*,*,#33550,.F.); +#33550 = EDGE_CURVE('',#33551,#33543,#33553,.T.); +#33551 = VERTEX_POINT('',#33552); +#33552 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33553 = LINE('',#33554,#33555); +#33554 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33555 = VECTOR('',#33556,1.); +#33556 = DIRECTION('',(0.,0.,1.)); +#33557 = ORIENTED_EDGE('',*,*,#33558,.F.); +#33558 = EDGE_CURVE('',#33520,#33551,#33559,.T.); +#33559 = LINE('',#33560,#33561); +#33560 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33561 = VECTOR('',#33562,1.); +#33562 = DIRECTION('',(0.,1.,0.)); +#33563 = PLANE('',#33564); +#33564 = AXIS2_PLACEMENT_3D('',#33565,#33566,#33567); +#33565 = CARTESIAN_POINT('',(0.5,9.75,0.8)); +#33566 = DIRECTION('',(-1.,0.,0.)); +#33567 = DIRECTION('',(0.,1.,0.)); +#33568 = ADVANCED_FACE('',(#33569),#33594,.F.); +#33569 = FACE_BOUND('',#33570,.F.); +#33570 = EDGE_LOOP('',(#33571,#33572,#33580,#33588)); +#33571 = ORIENTED_EDGE('',*,*,#33550,.T.); +#33572 = ORIENTED_EDGE('',*,*,#33573,.T.); +#33573 = EDGE_CURVE('',#33543,#33574,#33576,.T.); +#33574 = VERTEX_POINT('',#33575); +#33575 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#33576 = LINE('',#33577,#33578); +#33577 = CARTESIAN_POINT('',(0.5,12.25,1.)); +#33578 = VECTOR('',#33579,1.); +#33579 = DIRECTION('',(-1.,0.,0.)); +#33580 = ORIENTED_EDGE('',*,*,#33581,.F.); +#33581 = EDGE_CURVE('',#33582,#33574,#33584,.T.); +#33582 = VERTEX_POINT('',#33583); +#33583 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33584 = LINE('',#33585,#33586); +#33585 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33586 = VECTOR('',#33587,1.); +#33587 = DIRECTION('',(0.,0.,1.)); +#33588 = ORIENTED_EDGE('',*,*,#33589,.F.); +#33589 = EDGE_CURVE('',#33551,#33582,#33590,.T.); +#33590 = LINE('',#33591,#33592); +#33591 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33592 = VECTOR('',#33593,1.); +#33593 = DIRECTION('',(-1.,0.,0.)); +#33594 = PLANE('',#33595); +#33595 = AXIS2_PLACEMENT_3D('',#33596,#33597,#33598); +#33596 = CARTESIAN_POINT('',(0.5,12.25,0.8)); +#33597 = DIRECTION('',(0.,-1.,0.)); +#33598 = DIRECTION('',(-1.,0.,0.)); +#33599 = ADVANCED_FACE('',(#33600),#33625,.F.); +#33600 = FACE_BOUND('',#33601,.F.); +#33601 = EDGE_LOOP('',(#33602,#33603,#33611,#33619)); +#33602 = ORIENTED_EDGE('',*,*,#33581,.T.); +#33603 = ORIENTED_EDGE('',*,*,#33604,.T.); +#33604 = EDGE_CURVE('',#33574,#33605,#33607,.T.); +#33605 = VERTEX_POINT('',#33606); +#33606 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#33607 = LINE('',#33608,#33609); +#33608 = CARTESIAN_POINT('',(-2.75,12.25,1.)); +#33609 = VECTOR('',#33610,1.); +#33610 = DIRECTION('',(0.,-1.,0.)); +#33611 = ORIENTED_EDGE('',*,*,#33612,.F.); +#33612 = EDGE_CURVE('',#33613,#33605,#33615,.T.); +#33613 = VERTEX_POINT('',#33614); +#33614 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33615 = LINE('',#33616,#33617); +#33616 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33617 = VECTOR('',#33618,1.); +#33618 = DIRECTION('',(0.,0.,1.)); +#33619 = ORIENTED_EDGE('',*,*,#33620,.F.); +#33620 = EDGE_CURVE('',#33582,#33613,#33621,.T.); +#33621 = LINE('',#33622,#33623); +#33622 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33623 = VECTOR('',#33624,1.); +#33624 = DIRECTION('',(0.,-1.,0.)); +#33625 = PLANE('',#33626); +#33626 = AXIS2_PLACEMENT_3D('',#33627,#33628,#33629); +#33627 = CARTESIAN_POINT('',(-2.75,12.25,0.8)); +#33628 = DIRECTION('',(1.,0.,0.)); +#33629 = DIRECTION('',(0.,-1.,0.)); +#33630 = ADVANCED_FACE('',(#33631),#33656,.F.); +#33631 = FACE_BOUND('',#33632,.F.); +#33632 = EDGE_LOOP('',(#33633,#33634,#33642,#33650)); +#33633 = ORIENTED_EDGE('',*,*,#33612,.T.); +#33634 = ORIENTED_EDGE('',*,*,#33635,.T.); +#33635 = EDGE_CURVE('',#33605,#33636,#33638,.T.); +#33636 = VERTEX_POINT('',#33637); +#33637 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#33638 = LINE('',#33639,#33640); +#33639 = CARTESIAN_POINT('',(-2.75,9.75,1.)); +#33640 = VECTOR('',#33641,1.); +#33641 = DIRECTION('',(-1.,0.,0.)); +#33642 = ORIENTED_EDGE('',*,*,#33643,.F.); +#33643 = EDGE_CURVE('',#33644,#33636,#33646,.T.); +#33644 = VERTEX_POINT('',#33645); +#33645 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33646 = LINE('',#33647,#33648); +#33647 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33648 = VECTOR('',#33649,1.); +#33649 = DIRECTION('',(0.,0.,1.)); +#33650 = ORIENTED_EDGE('',*,*,#33651,.F.); +#33651 = EDGE_CURVE('',#33613,#33644,#33652,.T.); +#33652 = LINE('',#33653,#33654); +#33653 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33654 = VECTOR('',#33655,1.); +#33655 = DIRECTION('',(-1.,0.,0.)); +#33656 = PLANE('',#33657); +#33657 = AXIS2_PLACEMENT_3D('',#33658,#33659,#33660); +#33658 = CARTESIAN_POINT('',(-2.75,9.75,0.8)); +#33659 = DIRECTION('',(0.,-1.,0.)); +#33660 = DIRECTION('',(-1.,0.,0.)); +#33661 = ADVANCED_FACE('',(#33662),#33687,.F.); +#33662 = FACE_BOUND('',#33663,.F.); +#33663 = EDGE_LOOP('',(#33664,#33665,#33673,#33681)); +#33664 = ORIENTED_EDGE('',*,*,#33643,.T.); +#33665 = ORIENTED_EDGE('',*,*,#33666,.T.); +#33666 = EDGE_CURVE('',#33636,#33667,#33669,.T.); +#33667 = VERTEX_POINT('',#33668); +#33668 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#33669 = LINE('',#33670,#33671); +#33670 = CARTESIAN_POINT('',(-4.25,9.75,1.)); +#33671 = VECTOR('',#33672,1.); +#33672 = DIRECTION('',(0.,1.,0.)); +#33673 = ORIENTED_EDGE('',*,*,#33674,.F.); +#33674 = EDGE_CURVE('',#33675,#33667,#33677,.T.); +#33675 = VERTEX_POINT('',#33676); +#33676 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33677 = LINE('',#33678,#33679); +#33678 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33679 = VECTOR('',#33680,1.); +#33680 = DIRECTION('',(0.,0.,1.)); +#33681 = ORIENTED_EDGE('',*,*,#33682,.F.); +#33682 = EDGE_CURVE('',#33644,#33675,#33683,.T.); +#33683 = LINE('',#33684,#33685); +#33684 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33685 = VECTOR('',#33686,1.); +#33686 = DIRECTION('',(0.,1.,0.)); +#33687 = PLANE('',#33688); +#33688 = AXIS2_PLACEMENT_3D('',#33689,#33690,#33691); +#33689 = CARTESIAN_POINT('',(-4.25,9.75,0.8)); +#33690 = DIRECTION('',(-1.,0.,0.)); +#33691 = DIRECTION('',(0.,1.,0.)); +#33692 = ADVANCED_FACE('',(#33693),#33718,.F.); +#33693 = FACE_BOUND('',#33694,.F.); +#33694 = EDGE_LOOP('',(#33695,#33696,#33704,#33712)); +#33695 = ORIENTED_EDGE('',*,*,#33674,.T.); +#33696 = ORIENTED_EDGE('',*,*,#33697,.T.); +#33697 = EDGE_CURVE('',#33667,#33698,#33700,.T.); +#33698 = VERTEX_POINT('',#33699); +#33699 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#33700 = LINE('',#33701,#33702); +#33701 = CARTESIAN_POINT('',(-4.25,12.25,1.)); +#33702 = VECTOR('',#33703,1.); +#33703 = DIRECTION('',(-1.,0.,0.)); +#33704 = ORIENTED_EDGE('',*,*,#33705,.F.); +#33705 = EDGE_CURVE('',#33706,#33698,#33708,.T.); +#33706 = VERTEX_POINT('',#33707); +#33707 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33708 = LINE('',#33709,#33710); +#33709 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33710 = VECTOR('',#33711,1.); +#33711 = DIRECTION('',(0.,0.,1.)); +#33712 = ORIENTED_EDGE('',*,*,#33713,.F.); +#33713 = EDGE_CURVE('',#33675,#33706,#33714,.T.); +#33714 = LINE('',#33715,#33716); +#33715 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33716 = VECTOR('',#33717,1.); +#33717 = DIRECTION('',(-1.,0.,0.)); +#33718 = PLANE('',#33719); +#33719 = AXIS2_PLACEMENT_3D('',#33720,#33721,#33722); +#33720 = CARTESIAN_POINT('',(-4.25,12.25,0.8)); +#33721 = DIRECTION('',(0.,-1.,0.)); +#33722 = DIRECTION('',(-1.,0.,0.)); +#33723 = ADVANCED_FACE('',(#33724),#33749,.F.); +#33724 = FACE_BOUND('',#33725,.F.); +#33725 = EDGE_LOOP('',(#33726,#33727,#33735,#33743)); +#33726 = ORIENTED_EDGE('',*,*,#33705,.T.); +#33727 = ORIENTED_EDGE('',*,*,#33728,.T.); +#33728 = EDGE_CURVE('',#33698,#33729,#33731,.T.); +#33729 = VERTEX_POINT('',#33730); +#33730 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#33731 = LINE('',#33732,#33733); +#33732 = CARTESIAN_POINT('',(-7.5,12.25,1.)); +#33733 = VECTOR('',#33734,1.); +#33734 = DIRECTION('',(0.,-1.,0.)); +#33735 = ORIENTED_EDGE('',*,*,#33736,.F.); +#33736 = EDGE_CURVE('',#33737,#33729,#33739,.T.); +#33737 = VERTEX_POINT('',#33738); +#33738 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33739 = LINE('',#33740,#33741); +#33740 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33741 = VECTOR('',#33742,1.); +#33742 = DIRECTION('',(0.,0.,1.)); +#33743 = ORIENTED_EDGE('',*,*,#33744,.F.); +#33744 = EDGE_CURVE('',#33706,#33737,#33745,.T.); +#33745 = LINE('',#33746,#33747); +#33746 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33747 = VECTOR('',#33748,1.); +#33748 = DIRECTION('',(0.,-1.,0.)); +#33749 = PLANE('',#33750); +#33750 = AXIS2_PLACEMENT_3D('',#33751,#33752,#33753); +#33751 = CARTESIAN_POINT('',(-7.5,12.25,0.8)); +#33752 = DIRECTION('',(1.,0.,0.)); +#33753 = DIRECTION('',(0.,-1.,0.)); +#33754 = ADVANCED_FACE('',(#33755),#33780,.F.); +#33755 = FACE_BOUND('',#33756,.F.); +#33756 = EDGE_LOOP('',(#33757,#33758,#33766,#33774)); +#33757 = ORIENTED_EDGE('',*,*,#33736,.T.); +#33758 = ORIENTED_EDGE('',*,*,#33759,.T.); +#33759 = EDGE_CURVE('',#33729,#33760,#33762,.T.); +#33760 = VERTEX_POINT('',#33761); +#33761 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#33762 = LINE('',#33763,#33764); +#33763 = CARTESIAN_POINT('',(-7.5,7.75,1.)); +#33764 = VECTOR('',#33765,1.); +#33765 = DIRECTION('',(1.,0.,0.)); +#33766 = ORIENTED_EDGE('',*,*,#33767,.F.); +#33767 = EDGE_CURVE('',#33768,#33760,#33770,.T.); +#33768 = VERTEX_POINT('',#33769); +#33769 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33770 = LINE('',#33771,#33772); +#33771 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33772 = VECTOR('',#33773,1.); +#33773 = DIRECTION('',(0.,0.,1.)); +#33774 = ORIENTED_EDGE('',*,*,#33775,.F.); +#33775 = EDGE_CURVE('',#33737,#33768,#33776,.T.); +#33776 = LINE('',#33777,#33778); +#33777 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33778 = VECTOR('',#33779,1.); +#33779 = DIRECTION('',(1.,0.,0.)); +#33780 = PLANE('',#33781); +#33781 = AXIS2_PLACEMENT_3D('',#33782,#33783,#33784); +#33782 = CARTESIAN_POINT('',(-7.5,7.75,0.8)); +#33783 = DIRECTION('',(0.,1.,0.)); +#33784 = DIRECTION('',(1.,0.,0.)); +#33785 = ADVANCED_FACE('',(#33786),#33811,.F.); +#33786 = FACE_BOUND('',#33787,.F.); +#33787 = EDGE_LOOP('',(#33788,#33789,#33797,#33805)); +#33788 = ORIENTED_EDGE('',*,*,#33767,.T.); +#33789 = ORIENTED_EDGE('',*,*,#33790,.T.); +#33790 = EDGE_CURVE('',#33760,#33791,#33793,.T.); +#33791 = VERTEX_POINT('',#33792); +#33792 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#33793 = LINE('',#33794,#33795); +#33794 = CARTESIAN_POINT('',(-6.5,7.75,1.)); +#33795 = VECTOR('',#33796,1.); +#33796 = DIRECTION('',(0.,1.,0.)); +#33797 = ORIENTED_EDGE('',*,*,#33798,.F.); +#33798 = EDGE_CURVE('',#33799,#33791,#33801,.T.); +#33799 = VERTEX_POINT('',#33800); +#33800 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33801 = LINE('',#33802,#33803); +#33802 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33803 = VECTOR('',#33804,1.); +#33804 = DIRECTION('',(0.,0.,1.)); +#33805 = ORIENTED_EDGE('',*,*,#33806,.F.); +#33806 = EDGE_CURVE('',#33768,#33799,#33807,.T.); +#33807 = LINE('',#33808,#33809); +#33808 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33809 = VECTOR('',#33810,1.); +#33810 = DIRECTION('',(0.,1.,0.)); +#33811 = PLANE('',#33812); +#33812 = AXIS2_PLACEMENT_3D('',#33813,#33814,#33815); +#33813 = CARTESIAN_POINT('',(-6.5,7.75,0.8)); +#33814 = DIRECTION('',(-1.,0.,0.)); +#33815 = DIRECTION('',(0.,1.,0.)); +#33816 = ADVANCED_FACE('',(#33817),#33842,.F.); +#33817 = FACE_BOUND('',#33818,.F.); +#33818 = EDGE_LOOP('',(#33819,#33820,#33828,#33836)); +#33819 = ORIENTED_EDGE('',*,*,#33798,.T.); +#33820 = ORIENTED_EDGE('',*,*,#33821,.T.); +#33821 = EDGE_CURVE('',#33791,#33822,#33824,.T.); +#33822 = VERTEX_POINT('',#33823); +#33823 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#33824 = LINE('',#33825,#33826); +#33825 = CARTESIAN_POINT('',(-6.5,11.25,1.)); +#33826 = VECTOR('',#33827,1.); +#33827 = DIRECTION('',(1.,0.,0.)); +#33828 = ORIENTED_EDGE('',*,*,#33829,.F.); +#33829 = EDGE_CURVE('',#33830,#33822,#33832,.T.); +#33830 = VERTEX_POINT('',#33831); +#33831 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33832 = LINE('',#33833,#33834); +#33833 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33834 = VECTOR('',#33835,1.); +#33835 = DIRECTION('',(0.,0.,1.)); +#33836 = ORIENTED_EDGE('',*,*,#33837,.F.); +#33837 = EDGE_CURVE('',#33799,#33830,#33838,.T.); +#33838 = LINE('',#33839,#33840); +#33839 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33840 = VECTOR('',#33841,1.); +#33841 = DIRECTION('',(1.,0.,0.)); +#33842 = PLANE('',#33843); +#33843 = AXIS2_PLACEMENT_3D('',#33844,#33845,#33846); +#33844 = CARTESIAN_POINT('',(-6.5,11.25,0.8)); +#33845 = DIRECTION('',(0.,1.,0.)); +#33846 = DIRECTION('',(1.,0.,0.)); +#33847 = ADVANCED_FACE('',(#33848),#33873,.F.); +#33848 = FACE_BOUND('',#33849,.F.); +#33849 = EDGE_LOOP('',(#33850,#33851,#33859,#33867)); +#33850 = ORIENTED_EDGE('',*,*,#33829,.T.); +#33851 = ORIENTED_EDGE('',*,*,#33852,.T.); +#33852 = EDGE_CURVE('',#33822,#33853,#33855,.T.); +#33853 = VERTEX_POINT('',#33854); +#33854 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#33855 = LINE('',#33856,#33857); +#33856 = CARTESIAN_POINT('',(-5.25,11.25,1.)); +#33857 = VECTOR('',#33858,1.); +#33858 = DIRECTION('',(0.,-1.,0.)); +#33859 = ORIENTED_EDGE('',*,*,#33860,.F.); +#33860 = EDGE_CURVE('',#33861,#33853,#33863,.T.); +#33861 = VERTEX_POINT('',#33862); +#33862 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33863 = LINE('',#33864,#33865); +#33864 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33865 = VECTOR('',#33866,1.); +#33866 = DIRECTION('',(0.,0.,1.)); +#33867 = ORIENTED_EDGE('',*,*,#33868,.F.); +#33868 = EDGE_CURVE('',#33830,#33861,#33869,.T.); +#33869 = LINE('',#33870,#33871); +#33870 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33871 = VECTOR('',#33872,1.); +#33872 = DIRECTION('',(0.,-1.,0.)); +#33873 = PLANE('',#33874); +#33874 = AXIS2_PLACEMENT_3D('',#33875,#33876,#33877); +#33875 = CARTESIAN_POINT('',(-5.25,11.25,0.8)); +#33876 = DIRECTION('',(1.,0.,0.)); +#33877 = DIRECTION('',(0.,-1.,0.)); +#33878 = ADVANCED_FACE('',(#33879),#33904,.F.); +#33879 = FACE_BOUND('',#33880,.F.); +#33880 = EDGE_LOOP('',(#33881,#33882,#33890,#33898)); +#33881 = ORIENTED_EDGE('',*,*,#33860,.T.); +#33882 = ORIENTED_EDGE('',*,*,#33883,.T.); +#33883 = EDGE_CURVE('',#33853,#33884,#33886,.T.); +#33884 = VERTEX_POINT('',#33885); +#33885 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#33886 = LINE('',#33887,#33888); +#33887 = CARTESIAN_POINT('',(-5.25,8.75,1.)); +#33888 = VECTOR('',#33889,1.); +#33889 = DIRECTION('',(1.,0.,0.)); +#33890 = ORIENTED_EDGE('',*,*,#33891,.F.); +#33891 = EDGE_CURVE('',#33892,#33884,#33894,.T.); +#33892 = VERTEX_POINT('',#33893); +#33893 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33894 = LINE('',#33895,#33896); +#33895 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33896 = VECTOR('',#33897,1.); +#33897 = DIRECTION('',(0.,0.,1.)); +#33898 = ORIENTED_EDGE('',*,*,#33899,.F.); +#33899 = EDGE_CURVE('',#33861,#33892,#33900,.T.); +#33900 = LINE('',#33901,#33902); +#33901 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33902 = VECTOR('',#33903,1.); +#33903 = DIRECTION('',(1.,0.,0.)); +#33904 = PLANE('',#33905); +#33905 = AXIS2_PLACEMENT_3D('',#33906,#33907,#33908); +#33906 = CARTESIAN_POINT('',(-5.25,8.75,0.8)); +#33907 = DIRECTION('',(0.,1.,0.)); +#33908 = DIRECTION('',(1.,0.,0.)); +#33909 = ADVANCED_FACE('',(#33910),#33935,.F.); +#33910 = FACE_BOUND('',#33911,.F.); +#33911 = EDGE_LOOP('',(#33912,#33913,#33921,#33929)); +#33912 = ORIENTED_EDGE('',*,*,#33891,.T.); +#33913 = ORIENTED_EDGE('',*,*,#33914,.T.); +#33914 = EDGE_CURVE('',#33884,#33915,#33917,.T.); +#33915 = VERTEX_POINT('',#33916); +#33916 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#33917 = LINE('',#33918,#33919); +#33918 = CARTESIAN_POINT('',(-1.75,8.75,1.)); +#33919 = VECTOR('',#33920,1.); +#33920 = DIRECTION('',(0.,1.,0.)); +#33921 = ORIENTED_EDGE('',*,*,#33922,.F.); +#33922 = EDGE_CURVE('',#33923,#33915,#33925,.T.); +#33923 = VERTEX_POINT('',#33924); +#33924 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33925 = LINE('',#33926,#33927); +#33926 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33927 = VECTOR('',#33928,1.); +#33928 = DIRECTION('',(0.,0.,1.)); +#33929 = ORIENTED_EDGE('',*,*,#33930,.F.); +#33930 = EDGE_CURVE('',#33892,#33923,#33931,.T.); +#33931 = LINE('',#33932,#33933); +#33932 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33933 = VECTOR('',#33934,1.); +#33934 = DIRECTION('',(0.,1.,0.)); +#33935 = PLANE('',#33936); +#33936 = AXIS2_PLACEMENT_3D('',#33937,#33938,#33939); +#33937 = CARTESIAN_POINT('',(-1.75,8.75,0.8)); +#33938 = DIRECTION('',(-1.,0.,0.)); +#33939 = DIRECTION('',(0.,1.,0.)); +#33940 = ADVANCED_FACE('',(#33941),#33966,.F.); +#33941 = FACE_BOUND('',#33942,.F.); +#33942 = EDGE_LOOP('',(#33943,#33944,#33952,#33960)); +#33943 = ORIENTED_EDGE('',*,*,#33922,.T.); +#33944 = ORIENTED_EDGE('',*,*,#33945,.T.); +#33945 = EDGE_CURVE('',#33915,#33946,#33948,.T.); +#33946 = VERTEX_POINT('',#33947); +#33947 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#33948 = LINE('',#33949,#33950); +#33949 = CARTESIAN_POINT('',(-1.75,11.25,1.)); +#33950 = VECTOR('',#33951,1.); +#33951 = DIRECTION('',(1.,0.,0.)); +#33952 = ORIENTED_EDGE('',*,*,#33953,.F.); +#33953 = EDGE_CURVE('',#33954,#33946,#33956,.T.); +#33954 = VERTEX_POINT('',#33955); +#33955 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#33956 = LINE('',#33957,#33958); +#33957 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#33958 = VECTOR('',#33959,1.); +#33959 = DIRECTION('',(0.,0.,1.)); +#33960 = ORIENTED_EDGE('',*,*,#33961,.F.); +#33961 = EDGE_CURVE('',#33923,#33954,#33962,.T.); +#33962 = LINE('',#33963,#33964); +#33963 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33964 = VECTOR('',#33965,1.); +#33965 = DIRECTION('',(1.,0.,0.)); +#33966 = PLANE('',#33967); +#33967 = AXIS2_PLACEMENT_3D('',#33968,#33969,#33970); +#33968 = CARTESIAN_POINT('',(-1.75,11.25,0.8)); +#33969 = DIRECTION('',(0.,1.,0.)); +#33970 = DIRECTION('',(1.,0.,0.)); +#33971 = ADVANCED_FACE('',(#33972),#33997,.F.); +#33972 = FACE_BOUND('',#33973,.F.); +#33973 = EDGE_LOOP('',(#33974,#33975,#33983,#33991)); +#33974 = ORIENTED_EDGE('',*,*,#33953,.T.); +#33975 = ORIENTED_EDGE('',*,*,#33976,.T.); +#33976 = EDGE_CURVE('',#33946,#33977,#33979,.T.); +#33977 = VERTEX_POINT('',#33978); +#33978 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#33979 = LINE('',#33980,#33981); +#33980 = CARTESIAN_POINT('',(-0.5,11.25,1.)); +#33981 = VECTOR('',#33982,1.); +#33982 = DIRECTION('',(0.,-1.,0.)); +#33983 = ORIENTED_EDGE('',*,*,#33984,.F.); +#33984 = EDGE_CURVE('',#33985,#33977,#33987,.T.); +#33985 = VERTEX_POINT('',#33986); +#33986 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#33987 = LINE('',#33988,#33989); +#33988 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#33989 = VECTOR('',#33990,1.); +#33990 = DIRECTION('',(0.,0.,1.)); +#33991 = ORIENTED_EDGE('',*,*,#33992,.F.); +#33992 = EDGE_CURVE('',#33954,#33985,#33993,.T.); +#33993 = LINE('',#33994,#33995); +#33994 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#33995 = VECTOR('',#33996,1.); +#33996 = DIRECTION('',(0.,-1.,0.)); +#33997 = PLANE('',#33998); +#33998 = AXIS2_PLACEMENT_3D('',#33999,#34000,#34001); +#33999 = CARTESIAN_POINT('',(-0.5,11.25,0.8)); +#34000 = DIRECTION('',(1.,0.,0.)); +#34001 = DIRECTION('',(0.,-1.,0.)); +#34002 = ADVANCED_FACE('',(#34003),#34028,.F.); +#34003 = FACE_BOUND('',#34004,.F.); +#34004 = EDGE_LOOP('',(#34005,#34006,#34014,#34022)); +#34005 = ORIENTED_EDGE('',*,*,#33984,.T.); +#34006 = ORIENTED_EDGE('',*,*,#34007,.T.); +#34007 = EDGE_CURVE('',#33977,#34008,#34010,.T.); +#34008 = VERTEX_POINT('',#34009); +#34009 = CARTESIAN_POINT('',(3.,8.75,1.)); +#34010 = LINE('',#34011,#34012); +#34011 = CARTESIAN_POINT('',(-0.5,8.75,1.)); +#34012 = VECTOR('',#34013,1.); +#34013 = DIRECTION('',(1.,0.,0.)); +#34014 = ORIENTED_EDGE('',*,*,#34015,.F.); +#34015 = EDGE_CURVE('',#34016,#34008,#34018,.T.); +#34016 = VERTEX_POINT('',#34017); +#34017 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#34018 = LINE('',#34019,#34020); +#34019 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#34020 = VECTOR('',#34021,1.); +#34021 = DIRECTION('',(0.,0.,1.)); +#34022 = ORIENTED_EDGE('',*,*,#34023,.F.); +#34023 = EDGE_CURVE('',#33985,#34016,#34024,.T.); +#34024 = LINE('',#34025,#34026); +#34025 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#34026 = VECTOR('',#34027,1.); +#34027 = DIRECTION('',(1.,0.,0.)); +#34028 = PLANE('',#34029); +#34029 = AXIS2_PLACEMENT_3D('',#34030,#34031,#34032); +#34030 = CARTESIAN_POINT('',(-0.5,8.75,0.8)); +#34031 = DIRECTION('',(0.,1.,0.)); +#34032 = DIRECTION('',(1.,0.,0.)); +#34033 = ADVANCED_FACE('',(#34034),#34059,.F.); +#34034 = FACE_BOUND('',#34035,.F.); +#34035 = EDGE_LOOP('',(#34036,#34037,#34045,#34053)); +#34036 = ORIENTED_EDGE('',*,*,#34015,.T.); +#34037 = ORIENTED_EDGE('',*,*,#34038,.T.); +#34038 = EDGE_CURVE('',#34008,#34039,#34041,.T.); +#34039 = VERTEX_POINT('',#34040); +#34040 = CARTESIAN_POINT('',(3.,11.25,1.)); +#34041 = LINE('',#34042,#34043); +#34042 = CARTESIAN_POINT('',(3.,8.75,1.)); +#34043 = VECTOR('',#34044,1.); +#34044 = DIRECTION('',(0.,1.,0.)); +#34045 = ORIENTED_EDGE('',*,*,#34046,.F.); +#34046 = EDGE_CURVE('',#34047,#34039,#34049,.T.); +#34047 = VERTEX_POINT('',#34048); +#34048 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#34049 = LINE('',#34050,#34051); +#34050 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#34051 = VECTOR('',#34052,1.); +#34052 = DIRECTION('',(0.,0.,1.)); +#34053 = ORIENTED_EDGE('',*,*,#34054,.F.); +#34054 = EDGE_CURVE('',#34016,#34047,#34055,.T.); +#34055 = LINE('',#34056,#34057); +#34056 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#34057 = VECTOR('',#34058,1.); +#34058 = DIRECTION('',(0.,1.,0.)); +#34059 = PLANE('',#34060); +#34060 = AXIS2_PLACEMENT_3D('',#34061,#34062,#34063); +#34061 = CARTESIAN_POINT('',(3.,8.75,0.8)); +#34062 = DIRECTION('',(-1.,0.,0.)); +#34063 = DIRECTION('',(0.,1.,0.)); +#34064 = ADVANCED_FACE('',(#34065),#34090,.F.); +#34065 = FACE_BOUND('',#34066,.F.); +#34066 = EDGE_LOOP('',(#34067,#34068,#34076,#34084)); +#34067 = ORIENTED_EDGE('',*,*,#34046,.T.); +#34068 = ORIENTED_EDGE('',*,*,#34069,.T.); +#34069 = EDGE_CURVE('',#34039,#34070,#34072,.T.); +#34070 = VERTEX_POINT('',#34071); +#34071 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#34072 = LINE('',#34073,#34074); +#34073 = CARTESIAN_POINT('',(3.,11.25,1.)); +#34074 = VECTOR('',#34075,1.); +#34075 = DIRECTION('',(1.,0.,0.)); +#34076 = ORIENTED_EDGE('',*,*,#34077,.F.); +#34077 = EDGE_CURVE('',#34078,#34070,#34080,.T.); +#34078 = VERTEX_POINT('',#34079); +#34079 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#34080 = LINE('',#34081,#34082); +#34081 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#34082 = VECTOR('',#34083,1.); +#34083 = DIRECTION('',(0.,0.,1.)); +#34084 = ORIENTED_EDGE('',*,*,#34085,.F.); +#34085 = EDGE_CURVE('',#34047,#34078,#34086,.T.); +#34086 = LINE('',#34087,#34088); +#34087 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#34088 = VECTOR('',#34089,1.); +#34089 = DIRECTION('',(1.,0.,0.)); +#34090 = PLANE('',#34091); +#34091 = AXIS2_PLACEMENT_3D('',#34092,#34093,#34094); +#34092 = CARTESIAN_POINT('',(3.,11.25,0.8)); +#34093 = DIRECTION('',(0.,1.,0.)); +#34094 = DIRECTION('',(1.,0.,0.)); +#34095 = ADVANCED_FACE('',(#34096),#34121,.F.); +#34096 = FACE_BOUND('',#34097,.F.); +#34097 = EDGE_LOOP('',(#34098,#34099,#34107,#34115)); +#34098 = ORIENTED_EDGE('',*,*,#34077,.T.); +#34099 = ORIENTED_EDGE('',*,*,#34100,.T.); +#34100 = EDGE_CURVE('',#34070,#34101,#34103,.T.); +#34101 = VERTEX_POINT('',#34102); +#34102 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#34103 = LINE('',#34104,#34105); +#34104 = CARTESIAN_POINT('',(4.25,11.25,1.)); +#34105 = VECTOR('',#34106,1.); +#34106 = DIRECTION('',(0.,-1.,0.)); +#34107 = ORIENTED_EDGE('',*,*,#34108,.F.); +#34108 = EDGE_CURVE('',#34109,#34101,#34111,.T.); +#34109 = VERTEX_POINT('',#34110); +#34110 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#34111 = LINE('',#34112,#34113); +#34112 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#34113 = VECTOR('',#34114,1.); +#34114 = DIRECTION('',(0.,0.,1.)); +#34115 = ORIENTED_EDGE('',*,*,#34116,.F.); +#34116 = EDGE_CURVE('',#34078,#34109,#34117,.T.); +#34117 = LINE('',#34118,#34119); +#34118 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#34119 = VECTOR('',#34120,1.); +#34120 = DIRECTION('',(0.,-1.,0.)); +#34121 = PLANE('',#34122); +#34122 = AXIS2_PLACEMENT_3D('',#34123,#34124,#34125); +#34123 = CARTESIAN_POINT('',(4.25,11.25,0.8)); +#34124 = DIRECTION('',(1.,0.,0.)); +#34125 = DIRECTION('',(0.,-1.,0.)); +#34126 = ADVANCED_FACE('',(#34127),#34152,.F.); +#34127 = FACE_BOUND('',#34128,.F.); +#34128 = EDGE_LOOP('',(#34129,#34130,#34138,#34146)); +#34129 = ORIENTED_EDGE('',*,*,#34108,.T.); +#34130 = ORIENTED_EDGE('',*,*,#34131,.T.); +#34131 = EDGE_CURVE('',#34101,#34132,#34134,.T.); +#34132 = VERTEX_POINT('',#34133); +#34133 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#34134 = LINE('',#34135,#34136); +#34135 = CARTESIAN_POINT('',(4.25,6.75,1.)); +#34136 = VECTOR('',#34137,1.); +#34137 = DIRECTION('',(1.,0.,0.)); +#34138 = ORIENTED_EDGE('',*,*,#34139,.F.); +#34139 = EDGE_CURVE('',#34140,#34132,#34142,.T.); +#34140 = VERTEX_POINT('',#34141); +#34141 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#34142 = LINE('',#34143,#34144); +#34143 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#34144 = VECTOR('',#34145,1.); +#34145 = DIRECTION('',(0.,0.,1.)); +#34146 = ORIENTED_EDGE('',*,*,#34147,.F.); +#34147 = EDGE_CURVE('',#34109,#34140,#34148,.T.); +#34148 = LINE('',#34149,#34150); +#34149 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#34150 = VECTOR('',#34151,1.); +#34151 = DIRECTION('',(1.,0.,0.)); +#34152 = PLANE('',#34153); +#34153 = AXIS2_PLACEMENT_3D('',#34154,#34155,#34156); +#34154 = CARTESIAN_POINT('',(4.25,6.75,0.8)); +#34155 = DIRECTION('',(0.,1.,0.)); +#34156 = DIRECTION('',(1.,0.,0.)); +#34157 = ADVANCED_FACE('',(#34158),#34183,.F.); +#34158 = FACE_BOUND('',#34159,.F.); +#34159 = EDGE_LOOP('',(#34160,#34161,#34169,#34177)); +#34160 = ORIENTED_EDGE('',*,*,#34139,.T.); +#34161 = ORIENTED_EDGE('',*,*,#34162,.T.); +#34162 = EDGE_CURVE('',#34132,#34163,#34165,.T.); +#34163 = VERTEX_POINT('',#34164); +#34164 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#34165 = LINE('',#34166,#34167); +#34166 = CARTESIAN_POINT('',(5.25,6.75,1.)); +#34167 = VECTOR('',#34168,1.); +#34168 = DIRECTION('',(0.,1.,0.)); +#34169 = ORIENTED_EDGE('',*,*,#34170,.F.); +#34170 = EDGE_CURVE('',#34171,#34163,#34173,.T.); +#34171 = VERTEX_POINT('',#34172); +#34172 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#34173 = LINE('',#34174,#34175); +#34174 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#34175 = VECTOR('',#34176,1.); +#34176 = DIRECTION('',(0.,0.,1.)); +#34177 = ORIENTED_EDGE('',*,*,#34178,.F.); +#34178 = EDGE_CURVE('',#34140,#34171,#34179,.T.); +#34179 = LINE('',#34180,#34181); +#34180 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#34181 = VECTOR('',#34182,1.); +#34182 = DIRECTION('',(0.,1.,0.)); +#34183 = PLANE('',#34184); +#34184 = AXIS2_PLACEMENT_3D('',#34185,#34186,#34187); +#34185 = CARTESIAN_POINT('',(5.25,6.75,0.8)); +#34186 = DIRECTION('',(-1.,0.,0.)); +#34187 = DIRECTION('',(0.,1.,0.)); +#34188 = ADVANCED_FACE('',(#34189),#34214,.F.); +#34189 = FACE_BOUND('',#34190,.F.); +#34190 = EDGE_LOOP('',(#34191,#34192,#34200,#34208)); +#34191 = ORIENTED_EDGE('',*,*,#34170,.T.); +#34192 = ORIENTED_EDGE('',*,*,#34193,.T.); +#34193 = EDGE_CURVE('',#34163,#34194,#34196,.T.); +#34194 = VERTEX_POINT('',#34195); +#34195 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#34196 = LINE('',#34197,#34198); +#34197 = CARTESIAN_POINT('',(5.25,11.25,1.)); +#34198 = VECTOR('',#34199,1.); +#34199 = DIRECTION('',(1.,0.,0.)); +#34200 = ORIENTED_EDGE('',*,*,#34201,.F.); +#34201 = EDGE_CURVE('',#34202,#34194,#34204,.T.); +#34202 = VERTEX_POINT('',#34203); +#34203 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#34204 = LINE('',#34205,#34206); +#34205 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#34206 = VECTOR('',#34207,1.); +#34207 = DIRECTION('',(0.,0.,1.)); +#34208 = ORIENTED_EDGE('',*,*,#34209,.F.); +#34209 = EDGE_CURVE('',#34171,#34202,#34210,.T.); +#34210 = LINE('',#34211,#34212); +#34211 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#34212 = VECTOR('',#34213,1.); +#34213 = DIRECTION('',(1.,0.,0.)); +#34214 = PLANE('',#34215); +#34215 = AXIS2_PLACEMENT_3D('',#34216,#34217,#34218); +#34216 = CARTESIAN_POINT('',(5.25,11.25,0.8)); +#34217 = DIRECTION('',(0.,1.,0.)); +#34218 = DIRECTION('',(1.,0.,0.)); +#34219 = ADVANCED_FACE('',(#34220),#34245,.F.); +#34220 = FACE_BOUND('',#34221,.F.); +#34221 = EDGE_LOOP('',(#34222,#34223,#34231,#34239)); +#34222 = ORIENTED_EDGE('',*,*,#34201,.T.); +#34223 = ORIENTED_EDGE('',*,*,#34224,.T.); +#34224 = EDGE_CURVE('',#34194,#34225,#34227,.T.); +#34225 = VERTEX_POINT('',#34226); +#34226 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#34227 = LINE('',#34228,#34229); +#34228 = CARTESIAN_POINT('',(6.5,11.25,1.)); +#34229 = VECTOR('',#34230,1.); +#34230 = DIRECTION('',(0.,-1.,0.)); +#34231 = ORIENTED_EDGE('',*,*,#34232,.F.); +#34232 = EDGE_CURVE('',#34233,#34225,#34235,.T.); +#34233 = VERTEX_POINT('',#34234); +#34234 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#34235 = LINE('',#34236,#34237); +#34236 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#34237 = VECTOR('',#34238,1.); +#34238 = DIRECTION('',(0.,0.,1.)); +#34239 = ORIENTED_EDGE('',*,*,#34240,.F.); +#34240 = EDGE_CURVE('',#34202,#34233,#34241,.T.); +#34241 = LINE('',#34242,#34243); +#34242 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#34243 = VECTOR('',#34244,1.); +#34244 = DIRECTION('',(0.,-1.,0.)); +#34245 = PLANE('',#34246); +#34246 = AXIS2_PLACEMENT_3D('',#34247,#34248,#34249); +#34247 = CARTESIAN_POINT('',(6.5,11.25,0.8)); +#34248 = DIRECTION('',(1.,0.,0.)); +#34249 = DIRECTION('',(0.,-1.,0.)); +#34250 = ADVANCED_FACE('',(#34251),#34267,.F.); +#34251 = FACE_BOUND('',#34252,.F.); +#34252 = EDGE_LOOP('',(#34253,#34254,#34260,#34261)); +#34253 = ORIENTED_EDGE('',*,*,#34232,.T.); +#34254 = ORIENTED_EDGE('',*,*,#34255,.T.); +#34255 = EDGE_CURVE('',#34225,#33411,#34256,.T.); +#34256 = LINE('',#34257,#34258); +#34257 = CARTESIAN_POINT('',(6.5,6.75,1.)); +#34258 = VECTOR('',#34259,1.); +#34259 = DIRECTION('',(1.,0.,0.)); +#34260 = ORIENTED_EDGE('',*,*,#33408,.F.); +#34261 = ORIENTED_EDGE('',*,*,#34262,.F.); +#34262 = EDGE_CURVE('',#34233,#33409,#34263,.T.); +#34263 = LINE('',#34264,#34265); +#34264 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#34265 = VECTOR('',#34266,1.); +#34266 = DIRECTION('',(1.,0.,0.)); +#34267 = PLANE('',#34268); +#34268 = AXIS2_PLACEMENT_3D('',#34269,#34270,#34271); +#34269 = CARTESIAN_POINT('',(6.5,6.75,0.8)); +#34270 = DIRECTION('',(0.,1.,0.)); +#34271 = DIRECTION('',(1.,0.,0.)); +#34272 = ADVANCED_FACE('',(#34273),#34303,.F.); +#34273 = FACE_BOUND('',#34274,.F.); +#34274 = EDGE_LOOP('',(#34275,#34276,#34277,#34278,#34279,#34280,#34281, + #34282,#34283,#34284,#34285,#34286,#34287,#34288,#34289,#34290, + #34291,#34292,#34293,#34294,#34295,#34296,#34297,#34298,#34299, + #34300,#34301,#34302)); +#34275 = ORIENTED_EDGE('',*,*,#33434,.T.); +#34276 = ORIENTED_EDGE('',*,*,#33465,.T.); +#34277 = ORIENTED_EDGE('',*,*,#33496,.T.); +#34278 = ORIENTED_EDGE('',*,*,#33527,.T.); +#34279 = ORIENTED_EDGE('',*,*,#33558,.T.); +#34280 = ORIENTED_EDGE('',*,*,#33589,.T.); +#34281 = ORIENTED_EDGE('',*,*,#33620,.T.); +#34282 = ORIENTED_EDGE('',*,*,#33651,.T.); +#34283 = ORIENTED_EDGE('',*,*,#33682,.T.); +#34284 = ORIENTED_EDGE('',*,*,#33713,.T.); +#34285 = ORIENTED_EDGE('',*,*,#33744,.T.); +#34286 = ORIENTED_EDGE('',*,*,#33775,.T.); +#34287 = ORIENTED_EDGE('',*,*,#33806,.T.); +#34288 = ORIENTED_EDGE('',*,*,#33837,.T.); +#34289 = ORIENTED_EDGE('',*,*,#33868,.T.); +#34290 = ORIENTED_EDGE('',*,*,#33899,.T.); +#34291 = ORIENTED_EDGE('',*,*,#33930,.T.); +#34292 = ORIENTED_EDGE('',*,*,#33961,.T.); +#34293 = ORIENTED_EDGE('',*,*,#33992,.T.); +#34294 = ORIENTED_EDGE('',*,*,#34023,.T.); +#34295 = ORIENTED_EDGE('',*,*,#34054,.T.); +#34296 = ORIENTED_EDGE('',*,*,#34085,.T.); +#34297 = ORIENTED_EDGE('',*,*,#34116,.T.); +#34298 = ORIENTED_EDGE('',*,*,#34147,.T.); +#34299 = ORIENTED_EDGE('',*,*,#34178,.T.); +#34300 = ORIENTED_EDGE('',*,*,#34209,.T.); +#34301 = ORIENTED_EDGE('',*,*,#34240,.T.); +#34302 = ORIENTED_EDGE('',*,*,#34262,.T.); +#34303 = PLANE('',#34304); +#34304 = AXIS2_PLACEMENT_3D('',#34305,#34306,#34307); +#34305 = CARTESIAN_POINT('',(0.444805194805,10.090909090909,0.8)); +#34306 = DIRECTION('',(0.,0.,1.)); +#34307 = DIRECTION('',(1.,0.,-0.)); +#34308 = ADVANCED_FACE('',(#34309),#34339,.T.); +#34309 = FACE_BOUND('',#34310,.T.); +#34310 = EDGE_LOOP('',(#34311,#34312,#34313,#34314,#34315,#34316,#34317, + #34318,#34319,#34320,#34321,#34322,#34323,#34324,#34325,#34326, + #34327,#34328,#34329,#34330,#34331,#34332,#34333,#34334,#34335, + #34336,#34337,#34338)); +#34311 = ORIENTED_EDGE('',*,*,#33418,.T.); +#34312 = ORIENTED_EDGE('',*,*,#33449,.T.); +#34313 = ORIENTED_EDGE('',*,*,#33480,.T.); +#34314 = ORIENTED_EDGE('',*,*,#33511,.T.); +#34315 = ORIENTED_EDGE('',*,*,#33542,.T.); +#34316 = ORIENTED_EDGE('',*,*,#33573,.T.); +#34317 = ORIENTED_EDGE('',*,*,#33604,.T.); +#34318 = ORIENTED_EDGE('',*,*,#33635,.T.); +#34319 = ORIENTED_EDGE('',*,*,#33666,.T.); +#34320 = ORIENTED_EDGE('',*,*,#33697,.T.); +#34321 = ORIENTED_EDGE('',*,*,#33728,.T.); +#34322 = ORIENTED_EDGE('',*,*,#33759,.T.); +#34323 = ORIENTED_EDGE('',*,*,#33790,.T.); +#34324 = ORIENTED_EDGE('',*,*,#33821,.T.); +#34325 = ORIENTED_EDGE('',*,*,#33852,.T.); +#34326 = ORIENTED_EDGE('',*,*,#33883,.T.); +#34327 = ORIENTED_EDGE('',*,*,#33914,.T.); +#34328 = ORIENTED_EDGE('',*,*,#33945,.T.); +#34329 = ORIENTED_EDGE('',*,*,#33976,.T.); +#34330 = ORIENTED_EDGE('',*,*,#34007,.T.); +#34331 = ORIENTED_EDGE('',*,*,#34038,.T.); +#34332 = ORIENTED_EDGE('',*,*,#34069,.T.); +#34333 = ORIENTED_EDGE('',*,*,#34100,.T.); +#34334 = ORIENTED_EDGE('',*,*,#34131,.T.); +#34335 = ORIENTED_EDGE('',*,*,#34162,.T.); +#34336 = ORIENTED_EDGE('',*,*,#34193,.T.); +#34337 = ORIENTED_EDGE('',*,*,#34224,.T.); +#34338 = ORIENTED_EDGE('',*,*,#34255,.T.); +#34339 = PLANE('',#34340); +#34340 = AXIS2_PLACEMENT_3D('',#34341,#34342,#34343); +#34341 = CARTESIAN_POINT('',(0.444805194805,10.090909090909,1.)); +#34342 = DIRECTION('',(0.,0.,1.)); +#34343 = DIRECTION('',(1.,0.,-0.)); +#34344 = MANIFOLD_SOLID_BREP('',#34345); +#34345 = CLOSED_SHELL('',(#34346,#34386,#34425,#34464,#36707,#38004, + #38028,#38045,#38069,#38086,#38110,#38134,#38158,#38182,#38206, + #38230,#38254,#38278,#38309,#38340,#38364,#38388,#38412,#38436, + #38460,#38484,#38508,#38532,#38556,#38580,#38611,#38642,#38666, + #38690,#38714,#38738,#38762,#38786,#38810,#38834,#38858,#38882, + #38913,#38944,#38968,#38992,#39016,#39040,#39064,#39088,#39112, + #39136,#39160,#39184,#39215,#39246,#39270,#39294,#39318,#39342, + #39366,#39390,#39414,#39438,#39462,#39486,#39517,#39548,#39572, + #39596,#39620,#39644,#39668,#39692,#39716,#39740,#39764,#39788, + #39819,#39850,#39874,#39898,#39922,#39946,#39970,#39994,#40018, + #40042,#40066,#40090,#40121,#40152,#40176,#40200,#40224,#40248, + #40272,#40296,#40320,#40344,#40368,#40392,#40423,#40454,#40478, + #40502,#40526,#40550,#40574,#40598,#40622,#40646,#40670,#40694, + #40725,#40756,#40780,#40804,#40828,#40852,#40876,#40900,#40924, + #40948,#40972,#40996,#41027,#41058,#41082,#41106,#41130,#41154, + #41178,#41202,#41226,#41250,#41274,#41298,#41329,#41360,#41384, + #41408,#41432,#41456,#41480,#41504,#41528,#41552,#41576,#41600, + #41631,#41662,#41686,#41710,#41734,#41758,#41782,#41806,#41830, + #41854,#41878,#41902,#41933,#41964,#41988,#42012,#42036,#42060, + #42084,#42108,#42132,#42156,#42180,#42204,#42227,#42250,#42275, + #42300,#42324,#42348,#42372,#42396,#42420,#42444,#42468,#42492, + #42516,#42540,#42571,#42602,#42626,#42650,#42674,#42698,#42722, + #42746,#42770,#42794,#42818,#42842,#42873,#42904,#42928,#42952, + #42976,#43000,#43024,#43048,#43072,#43096,#43120,#43144,#43175, + #43206,#43230,#43254,#43278,#43302,#43326,#43350,#43374,#43398, + #43422,#43446,#43477,#43508,#43532,#43556,#43580,#43604,#43628, + #43652,#43676,#43700,#43724,#43748,#43779,#43810,#43834,#43858, + #43882,#43906,#43930,#43954,#43978,#44002,#44026,#44050,#44074, + #44105,#44129,#44153,#44170,#44201,#44225,#44249,#44266,#44297, + #44321,#44345,#44362,#44393,#44417,#44441,#44458,#44489,#44513, + #44537,#44554,#44585,#44609,#44633,#44650,#44681,#44705,#44729, + #44746,#44777,#44801,#44825,#44842,#44873,#44897,#44921,#44938, + #44960,#44972,#44989,#45011,#45023,#45040,#45062,#45074,#45091, + #45113,#45125,#45142,#45164,#45176,#45193,#45215,#45227,#45244, + #45266,#45278,#45295,#45317,#45329,#45346,#45368,#45380,#45397, + #45419,#45431,#45448,#45470,#45482,#45499,#45521,#45533,#45550, + #45572,#45584,#45601,#45623,#45635,#45652,#45674,#45686,#45703, + #45725,#45737,#45754,#45776,#45788,#45805,#45827,#45839,#45856, + #45878,#45890,#45907,#45929,#45941,#45958,#45980,#45992,#46009, + #46031,#46043,#46060,#46082,#46094,#46111,#46133,#46145,#46162, + #46184,#46196,#46213,#46235,#46247,#46264,#46286,#46298,#46315, + #46337,#46349,#46366,#46388,#46400,#46417,#46439,#46451,#46468, + #46490,#46502,#46519,#46541,#46553,#46570,#46592,#46604,#46621, + #46643,#46655,#46672,#46694,#46706,#46723,#46745,#46757,#46774, + #46796,#46808,#46825,#46847,#46859,#46876,#46898,#46910,#46927, + #46944,#46956,#46968,#46980,#46992,#47004,#47016,#47028,#47040, + #47052,#47064,#47076,#47088,#47100,#47112,#47124,#47136,#47148, + #47160,#47172,#47184,#47196,#47208,#47220,#47232,#47244,#47256, + #47268,#47280,#47292,#47304,#47316,#47328,#47340,#47352,#47364, + #47376,#47388,#47400,#47412,#47424,#47436,#47448,#47460,#47472, + #47484,#47496,#47508,#47520)); +#34346 = ADVANCED_FACE('',(#34347),#34381,.T.); +#34347 = FACE_BOUND('',#34348,.T.); +#34348 = EDGE_LOOP('',(#34349,#34359,#34367,#34375)); +#34349 = ORIENTED_EDGE('',*,*,#34350,.T.); +#34350 = EDGE_CURVE('',#34351,#34353,#34355,.T.); +#34351 = VERTEX_POINT('',#34352); +#34352 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#34353 = VERTEX_POINT('',#34354); +#34354 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#34355 = LINE('',#34356,#34357); +#34356 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#34357 = VECTOR('',#34358,1.); +#34358 = DIRECTION('',(0.,0.,1.)); +#34359 = ORIENTED_EDGE('',*,*,#34360,.T.); +#34360 = EDGE_CURVE('',#34353,#34361,#34363,.T.); +#34361 = VERTEX_POINT('',#34362); +#34362 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#34363 = LINE('',#34364,#34365); +#34364 = CARTESIAN_POINT('',(-9.,12.75,0.8)); +#34365 = VECTOR('',#34366,1.); +#34366 = DIRECTION('',(1.,0.,0.)); +#34367 = ORIENTED_EDGE('',*,*,#34368,.F.); +#34368 = EDGE_CURVE('',#34369,#34361,#34371,.T.); +#34369 = VERTEX_POINT('',#34370); +#34370 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34371 = LINE('',#34372,#34373); +#34372 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34373 = VECTOR('',#34374,1.); +#34374 = DIRECTION('',(0.,0.,1.)); +#34375 = ORIENTED_EDGE('',*,*,#34376,.F.); +#34376 = EDGE_CURVE('',#34351,#34369,#34377,.T.); +#34377 = LINE('',#34378,#34379); +#34378 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#34379 = VECTOR('',#34380,1.); +#34380 = DIRECTION('',(1.,0.,0.)); +#34381 = PLANE('',#34382); +#34382 = AXIS2_PLACEMENT_3D('',#34383,#34384,#34385); +#34383 = CARTESIAN_POINT('',(-9.,12.75,0.)); +#34384 = DIRECTION('',(0.,1.,0.)); +#34385 = DIRECTION('',(1.,0.,0.)); +#34386 = ADVANCED_FACE('',(#34387),#34420,.T.); +#34387 = FACE_BOUND('',#34388,.T.); +#34388 = EDGE_LOOP('',(#34389,#34397,#34405,#34413,#34419)); +#34389 = ORIENTED_EDGE('',*,*,#34390,.F.); +#34390 = EDGE_CURVE('',#34391,#34351,#34393,.T.); +#34391 = VERTEX_POINT('',#34392); +#34392 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#34393 = LINE('',#34394,#34395); +#34394 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34395 = VECTOR('',#34396,1.); +#34396 = DIRECTION('',(0.,1.,0.)); +#34397 = ORIENTED_EDGE('',*,*,#34398,.F.); +#34398 = EDGE_CURVE('',#34399,#34391,#34401,.T.); +#34399 = VERTEX_POINT('',#34400); +#34400 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#34401 = LINE('',#34402,#34403); +#34402 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#34403 = VECTOR('',#34404,1.); +#34404 = DIRECTION('',(-0.,-0.,-1.)); +#34405 = ORIENTED_EDGE('',*,*,#34406,.F.); +#34406 = EDGE_CURVE('',#34407,#34399,#34409,.T.); +#34407 = VERTEX_POINT('',#34408); +#34408 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#34409 = LINE('',#34410,#34411); +#34410 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#34411 = VECTOR('',#34412,1.); +#34412 = DIRECTION('',(-0.,-0.,-1.)); +#34413 = ORIENTED_EDGE('',*,*,#34414,.T.); +#34414 = EDGE_CURVE('',#34407,#34353,#34415,.T.); +#34415 = LINE('',#34416,#34417); +#34416 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#34417 = VECTOR('',#34418,1.); +#34418 = DIRECTION('',(0.,1.,0.)); +#34419 = ORIENTED_EDGE('',*,*,#34350,.F.); +#34420 = PLANE('',#34421); +#34421 = AXIS2_PLACEMENT_3D('',#34422,#34423,#34424); +#34422 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34423 = DIRECTION('',(-1.,0.,0.)); +#34424 = DIRECTION('',(0.,1.,0.)); +#34425 = ADVANCED_FACE('',(#34426),#34459,.T.); +#34426 = FACE_BOUND('',#34427,.T.); +#34427 = EDGE_LOOP('',(#34428,#34436,#34437,#34445,#34453)); +#34428 = ORIENTED_EDGE('',*,*,#34429,.F.); +#34429 = EDGE_CURVE('',#34369,#34430,#34432,.T.); +#34430 = VERTEX_POINT('',#34431); +#34431 = CARTESIAN_POINT('',(9.,5.71,0.)); +#34432 = LINE('',#34433,#34434); +#34433 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34434 = VECTOR('',#34435,1.); +#34435 = DIRECTION('',(0.,-1.,0.)); +#34436 = ORIENTED_EDGE('',*,*,#34368,.T.); +#34437 = ORIENTED_EDGE('',*,*,#34438,.T.); +#34438 = EDGE_CURVE('',#34361,#34439,#34441,.T.); +#34439 = VERTEX_POINT('',#34440); +#34440 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#34441 = LINE('',#34442,#34443); +#34442 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#34443 = VECTOR('',#34444,1.); +#34444 = DIRECTION('',(0.,-1.,0.)); +#34445 = ORIENTED_EDGE('',*,*,#34446,.T.); +#34446 = EDGE_CURVE('',#34439,#34447,#34449,.T.); +#34447 = VERTEX_POINT('',#34448); +#34448 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#34449 = LINE('',#34450,#34451); +#34450 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#34451 = VECTOR('',#34452,1.); +#34452 = DIRECTION('',(0.,0.,-1.)); +#34453 = ORIENTED_EDGE('',*,*,#34454,.T.); +#34454 = EDGE_CURVE('',#34447,#34430,#34455,.T.); +#34455 = LINE('',#34456,#34457); +#34456 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#34457 = VECTOR('',#34458,1.); +#34458 = DIRECTION('',(0.,0.,-1.)); +#34459 = PLANE('',#34460); +#34460 = AXIS2_PLACEMENT_3D('',#34461,#34462,#34463); +#34461 = CARTESIAN_POINT('',(9.,12.75,0.)); +#34462 = DIRECTION('',(1.,0.,0.)); +#34463 = DIRECTION('',(0.,-1.,0.)); +#34464 = ADVANCED_FACE('',(#34465,#36396,#36430,#36464,#36498,#36532, + #36566,#36600,#36634,#36668),#36702,.F.); +#34465 = FACE_BOUND('',#34466,.F.); +#34466 = EDGE_LOOP('',(#34467,#34468,#34469,#34477,#34485,#34493,#34501, + #34509,#34517,#34525,#34533,#34541,#34549,#34557,#34565,#34573, + #34581,#34589,#34597,#34605,#34613,#34621,#34629,#34637,#34645, + #34653,#34661,#34669,#34677,#34685,#34693,#34701,#34709,#34717, + #34725,#34733,#34741,#34749,#34757,#34765,#34773,#34781,#34789, + #34797,#34805,#34813,#34821,#34829,#34837,#34845,#34853,#34861, + #34869,#34877,#34885,#34893,#34901,#34909,#34917,#34925,#34933, + #34941,#34949,#34957,#34965,#34973,#34981,#34989,#34997,#35005, + #35013,#35021,#35029,#35037,#35045,#35053,#35061,#35069,#35077, + #35085,#35093,#35101,#35109,#35117,#35125,#35133,#35141,#35149, + #35157,#35165,#35173,#35181,#35189,#35197,#35205,#35213,#35221, + #35229,#35237,#35245,#35253,#35261,#35269,#35277,#35285,#35293, + #35301,#35309,#35317,#35325,#35333,#35341,#35349,#35357,#35365, + #35373,#35381,#35389,#35397,#35405,#35413,#35421,#35429,#35437, + #35445,#35453,#35461,#35469,#35477,#35485,#35493,#35501,#35509, + #35517,#35525,#35533,#35541,#35549,#35557,#35565,#35573,#35581, + #35589,#35597,#35605,#35613,#35621,#35629,#35637,#35645,#35653, + #35661,#35669,#35677,#35685,#35693,#35701,#35709,#35717,#35725, + #35733,#35741,#35749,#35757,#35765,#35773,#35781,#35789,#35797, + #35805,#35813,#35821,#35829,#35837,#35845,#35853,#35861,#35869, + #35877,#35885,#35893,#35901,#35909,#35917,#35925,#35933,#35941, + #35949,#35957,#35965,#35973,#35981,#35989,#35997,#36005,#36013, + #36021,#36029,#36037,#36045,#36053,#36061,#36069,#36077,#36085, + #36093,#36101,#36109,#36117,#36125,#36133,#36141,#36149,#36157, + #36165,#36173,#36181,#36189,#36197,#36205,#36213,#36221,#36229, + #36237,#36245,#36253,#36261,#36269,#36277,#36285,#36293,#36301, + #36309,#36317,#36325,#36333,#36341,#36349,#36357,#36365,#36373, + #36381,#36389,#36395)); +#34467 = ORIENTED_EDGE('',*,*,#34376,.F.); +#34468 = ORIENTED_EDGE('',*,*,#34390,.F.); +#34469 = ORIENTED_EDGE('',*,*,#34470,.T.); +#34470 = EDGE_CURVE('',#34391,#34471,#34473,.T.); +#34471 = VERTEX_POINT('',#34472); +#34472 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#34473 = LINE('',#34474,#34475); +#34474 = CARTESIAN_POINT('',(-4.5,5.71,0.)); +#34475 = VECTOR('',#34476,1.); +#34476 = DIRECTION('',(1.,0.,0.)); +#34477 = ORIENTED_EDGE('',*,*,#34478,.T.); +#34478 = EDGE_CURVE('',#34471,#34479,#34481,.T.); +#34479 = VERTEX_POINT('',#34480); +#34480 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#34481 = LINE('',#34482,#34483); +#34482 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#34483 = VECTOR('',#34484,1.); +#34484 = DIRECTION('',(1.,0.,0.)); +#34485 = ORIENTED_EDGE('',*,*,#34486,.T.); +#34486 = EDGE_CURVE('',#34479,#34487,#34489,.T.); +#34487 = VERTEX_POINT('',#34488); +#34488 = CARTESIAN_POINT('',(-8.15,4.81,0.)); +#34489 = LINE('',#34490,#34491); +#34490 = CARTESIAN_POINT('',(-8.15,11.11,0.)); +#34491 = VECTOR('',#34492,1.); +#34492 = DIRECTION('',(0.,-1.,0.)); +#34493 = ORIENTED_EDGE('',*,*,#34494,.F.); +#34494 = EDGE_CURVE('',#34495,#34487,#34497,.T.); +#34495 = VERTEX_POINT('',#34496); +#34496 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#34497 = LINE('',#34498,#34499); +#34498 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#34499 = VECTOR('',#34500,1.); +#34500 = DIRECTION('',(1.,0.,0.)); +#34501 = ORIENTED_EDGE('',*,*,#34502,.T.); +#34502 = EDGE_CURVE('',#34495,#34503,#34505,.T.); +#34503 = VERTEX_POINT('',#34504); +#34504 = CARTESIAN_POINT('',(-9.,4.81,0.)); +#34505 = LINE('',#34506,#34507); +#34506 = CARTESIAN_POINT('',(-4.275,4.81,0.)); +#34507 = VECTOR('',#34508,1.); +#34508 = DIRECTION('',(-1.,0.,0.)); +#34509 = ORIENTED_EDGE('',*,*,#34510,.F.); +#34510 = EDGE_CURVE('',#34511,#34503,#34513,.T.); +#34511 = VERTEX_POINT('',#34512); +#34512 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#34513 = LINE('',#34514,#34515); +#34514 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34515 = VECTOR('',#34516,1.); +#34516 = DIRECTION('',(0.,1.,0.)); +#34517 = ORIENTED_EDGE('',*,*,#34518,.T.); +#34518 = EDGE_CURVE('',#34511,#34519,#34521,.T.); +#34519 = VERTEX_POINT('',#34520); +#34520 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#34521 = LINE('',#34522,#34523); +#34522 = CARTESIAN_POINT('',(-4.5,4.44,0.)); +#34523 = VECTOR('',#34524,1.); +#34524 = DIRECTION('',(1.,0.,0.)); +#34525 = ORIENTED_EDGE('',*,*,#34526,.T.); +#34526 = EDGE_CURVE('',#34519,#34527,#34529,.T.); +#34527 = VERTEX_POINT('',#34528); +#34528 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#34529 = LINE('',#34530,#34531); +#34530 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#34531 = VECTOR('',#34532,1.); +#34532 = DIRECTION('',(1.,0.,0.)); +#34533 = ORIENTED_EDGE('',*,*,#34534,.T.); +#34534 = EDGE_CURVE('',#34527,#34535,#34537,.T.); +#34535 = VERTEX_POINT('',#34536); +#34536 = CARTESIAN_POINT('',(-8.15,3.54,0.)); +#34537 = LINE('',#34538,#34539); +#34538 = CARTESIAN_POINT('',(-8.15,9.84,0.)); +#34539 = VECTOR('',#34540,1.); +#34540 = DIRECTION('',(0.,-1.,0.)); +#34541 = ORIENTED_EDGE('',*,*,#34542,.F.); +#34542 = EDGE_CURVE('',#34543,#34535,#34545,.T.); +#34543 = VERTEX_POINT('',#34544); +#34544 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#34545 = LINE('',#34546,#34547); +#34546 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#34547 = VECTOR('',#34548,1.); +#34548 = DIRECTION('',(1.,0.,0.)); +#34549 = ORIENTED_EDGE('',*,*,#34550,.T.); +#34550 = EDGE_CURVE('',#34543,#34551,#34553,.T.); +#34551 = VERTEX_POINT('',#34552); +#34552 = CARTESIAN_POINT('',(-9.,3.54,0.)); +#34553 = LINE('',#34554,#34555); +#34554 = CARTESIAN_POINT('',(-4.275,3.54,0.)); +#34555 = VECTOR('',#34556,1.); +#34556 = DIRECTION('',(-1.,0.,0.)); +#34557 = ORIENTED_EDGE('',*,*,#34558,.F.); +#34558 = EDGE_CURVE('',#34559,#34551,#34561,.T.); +#34559 = VERTEX_POINT('',#34560); +#34560 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#34561 = LINE('',#34562,#34563); +#34562 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34563 = VECTOR('',#34564,1.); +#34564 = DIRECTION('',(0.,1.,0.)); +#34565 = ORIENTED_EDGE('',*,*,#34566,.T.); +#34566 = EDGE_CURVE('',#34559,#34567,#34569,.T.); +#34567 = VERTEX_POINT('',#34568); +#34568 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#34569 = LINE('',#34570,#34571); +#34570 = CARTESIAN_POINT('',(-4.5,3.17,0.)); +#34571 = VECTOR('',#34572,1.); +#34572 = DIRECTION('',(1.,0.,0.)); +#34573 = ORIENTED_EDGE('',*,*,#34574,.T.); +#34574 = EDGE_CURVE('',#34567,#34575,#34577,.T.); +#34575 = VERTEX_POINT('',#34576); +#34576 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#34577 = LINE('',#34578,#34579); +#34578 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#34579 = VECTOR('',#34580,1.); +#34580 = DIRECTION('',(1.,0.,0.)); +#34581 = ORIENTED_EDGE('',*,*,#34582,.T.); +#34582 = EDGE_CURVE('',#34575,#34583,#34585,.T.); +#34583 = VERTEX_POINT('',#34584); +#34584 = CARTESIAN_POINT('',(-8.15,2.27,0.)); +#34585 = LINE('',#34586,#34587); +#34586 = CARTESIAN_POINT('',(-8.15,8.57,0.)); +#34587 = VECTOR('',#34588,1.); +#34588 = DIRECTION('',(0.,-1.,0.)); +#34589 = ORIENTED_EDGE('',*,*,#34590,.F.); +#34590 = EDGE_CURVE('',#34591,#34583,#34593,.T.); +#34591 = VERTEX_POINT('',#34592); +#34592 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#34593 = LINE('',#34594,#34595); +#34594 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#34595 = VECTOR('',#34596,1.); +#34596 = DIRECTION('',(1.,0.,0.)); +#34597 = ORIENTED_EDGE('',*,*,#34598,.T.); +#34598 = EDGE_CURVE('',#34591,#34599,#34601,.T.); +#34599 = VERTEX_POINT('',#34600); +#34600 = CARTESIAN_POINT('',(-9.,2.27,0.)); +#34601 = LINE('',#34602,#34603); +#34602 = CARTESIAN_POINT('',(-4.275,2.27,0.)); +#34603 = VECTOR('',#34604,1.); +#34604 = DIRECTION('',(-1.,0.,0.)); +#34605 = ORIENTED_EDGE('',*,*,#34606,.F.); +#34606 = EDGE_CURVE('',#34607,#34599,#34609,.T.); +#34607 = VERTEX_POINT('',#34608); +#34608 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#34609 = LINE('',#34610,#34611); +#34610 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34611 = VECTOR('',#34612,1.); +#34612 = DIRECTION('',(0.,1.,0.)); +#34613 = ORIENTED_EDGE('',*,*,#34614,.T.); +#34614 = EDGE_CURVE('',#34607,#34615,#34617,.T.); +#34615 = VERTEX_POINT('',#34616); +#34616 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#34617 = LINE('',#34618,#34619); +#34618 = CARTESIAN_POINT('',(-4.5,1.9,0.)); +#34619 = VECTOR('',#34620,1.); +#34620 = DIRECTION('',(1.,0.,0.)); +#34621 = ORIENTED_EDGE('',*,*,#34622,.T.); +#34622 = EDGE_CURVE('',#34615,#34623,#34625,.T.); +#34623 = VERTEX_POINT('',#34624); +#34624 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#34625 = LINE('',#34626,#34627); +#34626 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#34627 = VECTOR('',#34628,1.); +#34628 = DIRECTION('',(1.,0.,0.)); +#34629 = ORIENTED_EDGE('',*,*,#34630,.T.); +#34630 = EDGE_CURVE('',#34623,#34631,#34633,.T.); +#34631 = VERTEX_POINT('',#34632); +#34632 = CARTESIAN_POINT('',(-8.15,1.,0.)); +#34633 = LINE('',#34634,#34635); +#34634 = CARTESIAN_POINT('',(-8.15,7.3,0.)); +#34635 = VECTOR('',#34636,1.); +#34636 = DIRECTION('',(0.,-1.,0.)); +#34637 = ORIENTED_EDGE('',*,*,#34638,.F.); +#34638 = EDGE_CURVE('',#34639,#34631,#34641,.T.); +#34639 = VERTEX_POINT('',#34640); +#34640 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#34641 = LINE('',#34642,#34643); +#34642 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#34643 = VECTOR('',#34644,1.); +#34644 = DIRECTION('',(1.,0.,0.)); +#34645 = ORIENTED_EDGE('',*,*,#34646,.T.); +#34646 = EDGE_CURVE('',#34639,#34647,#34649,.T.); +#34647 = VERTEX_POINT('',#34648); +#34648 = CARTESIAN_POINT('',(-9.,1.,0.)); +#34649 = LINE('',#34650,#34651); +#34650 = CARTESIAN_POINT('',(-4.275,1.,0.)); +#34651 = VECTOR('',#34652,1.); +#34652 = DIRECTION('',(-1.,0.,0.)); +#34653 = ORIENTED_EDGE('',*,*,#34654,.F.); +#34654 = EDGE_CURVE('',#34655,#34647,#34657,.T.); +#34655 = VERTEX_POINT('',#34656); +#34656 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#34657 = LINE('',#34658,#34659); +#34658 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34659 = VECTOR('',#34660,1.); +#34660 = DIRECTION('',(0.,1.,0.)); +#34661 = ORIENTED_EDGE('',*,*,#34662,.T.); +#34662 = EDGE_CURVE('',#34655,#34663,#34665,.T.); +#34663 = VERTEX_POINT('',#34664); +#34664 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#34665 = LINE('',#34666,#34667); +#34666 = CARTESIAN_POINT('',(-4.5,0.63,0.)); +#34667 = VECTOR('',#34668,1.); +#34668 = DIRECTION('',(1.,0.,0.)); +#34669 = ORIENTED_EDGE('',*,*,#34670,.T.); +#34670 = EDGE_CURVE('',#34663,#34671,#34673,.T.); +#34671 = VERTEX_POINT('',#34672); +#34672 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#34673 = LINE('',#34674,#34675); +#34674 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#34675 = VECTOR('',#34676,1.); +#34676 = DIRECTION('',(1.,0.,0.)); +#34677 = ORIENTED_EDGE('',*,*,#34678,.T.); +#34678 = EDGE_CURVE('',#34671,#34679,#34681,.T.); +#34679 = VERTEX_POINT('',#34680); +#34680 = CARTESIAN_POINT('',(-8.15,-0.27,0.)); +#34681 = LINE('',#34682,#34683); +#34682 = CARTESIAN_POINT('',(-8.15,6.03,0.)); +#34683 = VECTOR('',#34684,1.); +#34684 = DIRECTION('',(0.,-1.,0.)); +#34685 = ORIENTED_EDGE('',*,*,#34686,.F.); +#34686 = EDGE_CURVE('',#34687,#34679,#34689,.T.); +#34687 = VERTEX_POINT('',#34688); +#34688 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#34689 = LINE('',#34690,#34691); +#34690 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#34691 = VECTOR('',#34692,1.); +#34692 = DIRECTION('',(1.,0.,0.)); +#34693 = ORIENTED_EDGE('',*,*,#34694,.T.); +#34694 = EDGE_CURVE('',#34687,#34695,#34697,.T.); +#34695 = VERTEX_POINT('',#34696); +#34696 = CARTESIAN_POINT('',(-9.,-0.27,0.)); +#34697 = LINE('',#34698,#34699); +#34698 = CARTESIAN_POINT('',(-4.275,-0.27,0.)); +#34699 = VECTOR('',#34700,1.); +#34700 = DIRECTION('',(-1.,0.,0.)); +#34701 = ORIENTED_EDGE('',*,*,#34702,.F.); +#34702 = EDGE_CURVE('',#34703,#34695,#34705,.T.); +#34703 = VERTEX_POINT('',#34704); +#34704 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#34705 = LINE('',#34706,#34707); +#34706 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34707 = VECTOR('',#34708,1.); +#34708 = DIRECTION('',(0.,1.,0.)); +#34709 = ORIENTED_EDGE('',*,*,#34710,.T.); +#34710 = EDGE_CURVE('',#34703,#34711,#34713,.T.); +#34711 = VERTEX_POINT('',#34712); +#34712 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#34713 = LINE('',#34714,#34715); +#34714 = CARTESIAN_POINT('',(-4.5,-0.64,0.)); +#34715 = VECTOR('',#34716,1.); +#34716 = DIRECTION('',(1.,0.,0.)); +#34717 = ORIENTED_EDGE('',*,*,#34718,.T.); +#34718 = EDGE_CURVE('',#34711,#34719,#34721,.T.); +#34719 = VERTEX_POINT('',#34720); +#34720 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#34721 = LINE('',#34722,#34723); +#34722 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#34723 = VECTOR('',#34724,1.); +#34724 = DIRECTION('',(1.,0.,0.)); +#34725 = ORIENTED_EDGE('',*,*,#34726,.T.); +#34726 = EDGE_CURVE('',#34719,#34727,#34729,.T.); +#34727 = VERTEX_POINT('',#34728); +#34728 = CARTESIAN_POINT('',(-8.15,-1.54,0.)); +#34729 = LINE('',#34730,#34731); +#34730 = CARTESIAN_POINT('',(-8.15,4.76,0.)); +#34731 = VECTOR('',#34732,1.); +#34732 = DIRECTION('',(0.,-1.,0.)); +#34733 = ORIENTED_EDGE('',*,*,#34734,.F.); +#34734 = EDGE_CURVE('',#34735,#34727,#34737,.T.); +#34735 = VERTEX_POINT('',#34736); +#34736 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#34737 = LINE('',#34738,#34739); +#34738 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#34739 = VECTOR('',#34740,1.); +#34740 = DIRECTION('',(1.,0.,0.)); +#34741 = ORIENTED_EDGE('',*,*,#34742,.T.); +#34742 = EDGE_CURVE('',#34735,#34743,#34745,.T.); +#34743 = VERTEX_POINT('',#34744); +#34744 = CARTESIAN_POINT('',(-9.,-1.54,0.)); +#34745 = LINE('',#34746,#34747); +#34746 = CARTESIAN_POINT('',(-4.275,-1.54,0.)); +#34747 = VECTOR('',#34748,1.); +#34748 = DIRECTION('',(-1.,0.,0.)); +#34749 = ORIENTED_EDGE('',*,*,#34750,.F.); +#34750 = EDGE_CURVE('',#34751,#34743,#34753,.T.); +#34751 = VERTEX_POINT('',#34752); +#34752 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#34753 = LINE('',#34754,#34755); +#34754 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34755 = VECTOR('',#34756,1.); +#34756 = DIRECTION('',(0.,1.,0.)); +#34757 = ORIENTED_EDGE('',*,*,#34758,.T.); +#34758 = EDGE_CURVE('',#34751,#34759,#34761,.T.); +#34759 = VERTEX_POINT('',#34760); +#34760 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#34761 = LINE('',#34762,#34763); +#34762 = CARTESIAN_POINT('',(-4.5,-1.91,0.)); +#34763 = VECTOR('',#34764,1.); +#34764 = DIRECTION('',(1.,0.,0.)); +#34765 = ORIENTED_EDGE('',*,*,#34766,.T.); +#34766 = EDGE_CURVE('',#34759,#34767,#34769,.T.); +#34767 = VERTEX_POINT('',#34768); +#34768 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#34769 = LINE('',#34770,#34771); +#34770 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#34771 = VECTOR('',#34772,1.); +#34772 = DIRECTION('',(1.,0.,0.)); +#34773 = ORIENTED_EDGE('',*,*,#34774,.T.); +#34774 = EDGE_CURVE('',#34767,#34775,#34777,.T.); +#34775 = VERTEX_POINT('',#34776); +#34776 = CARTESIAN_POINT('',(-8.15,-2.81,0.)); +#34777 = LINE('',#34778,#34779); +#34778 = CARTESIAN_POINT('',(-8.15,3.49,0.)); +#34779 = VECTOR('',#34780,1.); +#34780 = DIRECTION('',(0.,-1.,0.)); +#34781 = ORIENTED_EDGE('',*,*,#34782,.F.); +#34782 = EDGE_CURVE('',#34783,#34775,#34785,.T.); +#34783 = VERTEX_POINT('',#34784); +#34784 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#34785 = LINE('',#34786,#34787); +#34786 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#34787 = VECTOR('',#34788,1.); +#34788 = DIRECTION('',(1.,0.,0.)); +#34789 = ORIENTED_EDGE('',*,*,#34790,.T.); +#34790 = EDGE_CURVE('',#34783,#34791,#34793,.T.); +#34791 = VERTEX_POINT('',#34792); +#34792 = CARTESIAN_POINT('',(-9.,-2.81,0.)); +#34793 = LINE('',#34794,#34795); +#34794 = CARTESIAN_POINT('',(-4.275,-2.81,0.)); +#34795 = VECTOR('',#34796,1.); +#34796 = DIRECTION('',(-1.,0.,0.)); +#34797 = ORIENTED_EDGE('',*,*,#34798,.F.); +#34798 = EDGE_CURVE('',#34799,#34791,#34801,.T.); +#34799 = VERTEX_POINT('',#34800); +#34800 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#34801 = LINE('',#34802,#34803); +#34802 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34803 = VECTOR('',#34804,1.); +#34804 = DIRECTION('',(0.,1.,0.)); +#34805 = ORIENTED_EDGE('',*,*,#34806,.T.); +#34806 = EDGE_CURVE('',#34799,#34807,#34809,.T.); +#34807 = VERTEX_POINT('',#34808); +#34808 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#34809 = LINE('',#34810,#34811); +#34810 = CARTESIAN_POINT('',(-4.5,-3.18,0.)); +#34811 = VECTOR('',#34812,1.); +#34812 = DIRECTION('',(1.,0.,0.)); +#34813 = ORIENTED_EDGE('',*,*,#34814,.T.); +#34814 = EDGE_CURVE('',#34807,#34815,#34817,.T.); +#34815 = VERTEX_POINT('',#34816); +#34816 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#34817 = LINE('',#34818,#34819); +#34818 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#34819 = VECTOR('',#34820,1.); +#34820 = DIRECTION('',(1.,0.,0.)); +#34821 = ORIENTED_EDGE('',*,*,#34822,.T.); +#34822 = EDGE_CURVE('',#34815,#34823,#34825,.T.); +#34823 = VERTEX_POINT('',#34824); +#34824 = CARTESIAN_POINT('',(-8.15,-4.08,0.)); +#34825 = LINE('',#34826,#34827); +#34826 = CARTESIAN_POINT('',(-8.15,2.22,0.)); +#34827 = VECTOR('',#34828,1.); +#34828 = DIRECTION('',(0.,-1.,0.)); +#34829 = ORIENTED_EDGE('',*,*,#34830,.F.); +#34830 = EDGE_CURVE('',#34831,#34823,#34833,.T.); +#34831 = VERTEX_POINT('',#34832); +#34832 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#34833 = LINE('',#34834,#34835); +#34834 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#34835 = VECTOR('',#34836,1.); +#34836 = DIRECTION('',(1.,0.,0.)); +#34837 = ORIENTED_EDGE('',*,*,#34838,.T.); +#34838 = EDGE_CURVE('',#34831,#34839,#34841,.T.); +#34839 = VERTEX_POINT('',#34840); +#34840 = CARTESIAN_POINT('',(-9.,-4.08,0.)); +#34841 = LINE('',#34842,#34843); +#34842 = CARTESIAN_POINT('',(-4.275,-4.08,0.)); +#34843 = VECTOR('',#34844,1.); +#34844 = DIRECTION('',(-1.,0.,0.)); +#34845 = ORIENTED_EDGE('',*,*,#34846,.F.); +#34846 = EDGE_CURVE('',#34847,#34839,#34849,.T.); +#34847 = VERTEX_POINT('',#34848); +#34848 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#34849 = LINE('',#34850,#34851); +#34850 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34851 = VECTOR('',#34852,1.); +#34852 = DIRECTION('',(0.,1.,0.)); +#34853 = ORIENTED_EDGE('',*,*,#34854,.T.); +#34854 = EDGE_CURVE('',#34847,#34855,#34857,.T.); +#34855 = VERTEX_POINT('',#34856); +#34856 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#34857 = LINE('',#34858,#34859); +#34858 = CARTESIAN_POINT('',(-4.5,-4.45,0.)); +#34859 = VECTOR('',#34860,1.); +#34860 = DIRECTION('',(1.,0.,0.)); +#34861 = ORIENTED_EDGE('',*,*,#34862,.T.); +#34862 = EDGE_CURVE('',#34855,#34863,#34865,.T.); +#34863 = VERTEX_POINT('',#34864); +#34864 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#34865 = LINE('',#34866,#34867); +#34866 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#34867 = VECTOR('',#34868,1.); +#34868 = DIRECTION('',(1.,0.,0.)); +#34869 = ORIENTED_EDGE('',*,*,#34870,.T.); +#34870 = EDGE_CURVE('',#34863,#34871,#34873,.T.); +#34871 = VERTEX_POINT('',#34872); +#34872 = CARTESIAN_POINT('',(-8.15,-5.35,0.)); +#34873 = LINE('',#34874,#34875); +#34874 = CARTESIAN_POINT('',(-8.15,0.95,0.)); +#34875 = VECTOR('',#34876,1.); +#34876 = DIRECTION('',(0.,-1.,0.)); +#34877 = ORIENTED_EDGE('',*,*,#34878,.F.); +#34878 = EDGE_CURVE('',#34879,#34871,#34881,.T.); +#34879 = VERTEX_POINT('',#34880); +#34880 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#34881 = LINE('',#34882,#34883); +#34882 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#34883 = VECTOR('',#34884,1.); +#34884 = DIRECTION('',(1.,0.,0.)); +#34885 = ORIENTED_EDGE('',*,*,#34886,.T.); +#34886 = EDGE_CURVE('',#34879,#34887,#34889,.T.); +#34887 = VERTEX_POINT('',#34888); +#34888 = CARTESIAN_POINT('',(-9.,-5.35,0.)); +#34889 = LINE('',#34890,#34891); +#34890 = CARTESIAN_POINT('',(-4.275,-5.35,0.)); +#34891 = VECTOR('',#34892,1.); +#34892 = DIRECTION('',(-1.,0.,0.)); +#34893 = ORIENTED_EDGE('',*,*,#34894,.F.); +#34894 = EDGE_CURVE('',#34895,#34887,#34897,.T.); +#34895 = VERTEX_POINT('',#34896); +#34896 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#34897 = LINE('',#34898,#34899); +#34898 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34899 = VECTOR('',#34900,1.); +#34900 = DIRECTION('',(0.,1.,0.)); +#34901 = ORIENTED_EDGE('',*,*,#34902,.T.); +#34902 = EDGE_CURVE('',#34895,#34903,#34905,.T.); +#34903 = VERTEX_POINT('',#34904); +#34904 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#34905 = LINE('',#34906,#34907); +#34906 = CARTESIAN_POINT('',(-4.5,-5.72,0.)); +#34907 = VECTOR('',#34908,1.); +#34908 = DIRECTION('',(1.,0.,0.)); +#34909 = ORIENTED_EDGE('',*,*,#34910,.T.); +#34910 = EDGE_CURVE('',#34903,#34911,#34913,.T.); +#34911 = VERTEX_POINT('',#34912); +#34912 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#34913 = LINE('',#34914,#34915); +#34914 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#34915 = VECTOR('',#34916,1.); +#34916 = DIRECTION('',(1.,0.,0.)); +#34917 = ORIENTED_EDGE('',*,*,#34918,.T.); +#34918 = EDGE_CURVE('',#34911,#34919,#34921,.T.); +#34919 = VERTEX_POINT('',#34920); +#34920 = CARTESIAN_POINT('',(-8.15,-6.62,0.)); +#34921 = LINE('',#34922,#34923); +#34922 = CARTESIAN_POINT('',(-8.15,-0.32,0.)); +#34923 = VECTOR('',#34924,1.); +#34924 = DIRECTION('',(0.,-1.,0.)); +#34925 = ORIENTED_EDGE('',*,*,#34926,.F.); +#34926 = EDGE_CURVE('',#34927,#34919,#34929,.T.); +#34927 = VERTEX_POINT('',#34928); +#34928 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#34929 = LINE('',#34930,#34931); +#34930 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#34931 = VECTOR('',#34932,1.); +#34932 = DIRECTION('',(1.,0.,0.)); +#34933 = ORIENTED_EDGE('',*,*,#34934,.T.); +#34934 = EDGE_CURVE('',#34927,#34935,#34937,.T.); +#34935 = VERTEX_POINT('',#34936); +#34936 = CARTESIAN_POINT('',(-9.,-6.62,0.)); +#34937 = LINE('',#34938,#34939); +#34938 = CARTESIAN_POINT('',(-4.275,-6.62,0.)); +#34939 = VECTOR('',#34940,1.); +#34940 = DIRECTION('',(-1.,0.,0.)); +#34941 = ORIENTED_EDGE('',*,*,#34942,.F.); +#34942 = EDGE_CURVE('',#34943,#34935,#34945,.T.); +#34943 = VERTEX_POINT('',#34944); +#34944 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#34945 = LINE('',#34946,#34947); +#34946 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34947 = VECTOR('',#34948,1.); +#34948 = DIRECTION('',(0.,1.,0.)); +#34949 = ORIENTED_EDGE('',*,*,#34950,.T.); +#34950 = EDGE_CURVE('',#34943,#34951,#34953,.T.); +#34951 = VERTEX_POINT('',#34952); +#34952 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#34953 = LINE('',#34954,#34955); +#34954 = CARTESIAN_POINT('',(-4.5,-6.99,0.)); +#34955 = VECTOR('',#34956,1.); +#34956 = DIRECTION('',(1.,0.,0.)); +#34957 = ORIENTED_EDGE('',*,*,#34958,.T.); +#34958 = EDGE_CURVE('',#34951,#34959,#34961,.T.); +#34959 = VERTEX_POINT('',#34960); +#34960 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#34961 = LINE('',#34962,#34963); +#34962 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#34963 = VECTOR('',#34964,1.); +#34964 = DIRECTION('',(1.,0.,0.)); +#34965 = ORIENTED_EDGE('',*,*,#34966,.T.); +#34966 = EDGE_CURVE('',#34959,#34967,#34969,.T.); +#34967 = VERTEX_POINT('',#34968); +#34968 = CARTESIAN_POINT('',(-8.15,-7.89,0.)); +#34969 = LINE('',#34970,#34971); +#34970 = CARTESIAN_POINT('',(-8.15,-1.59,0.)); +#34971 = VECTOR('',#34972,1.); +#34972 = DIRECTION('',(0.,-1.,0.)); +#34973 = ORIENTED_EDGE('',*,*,#34974,.F.); +#34974 = EDGE_CURVE('',#34975,#34967,#34977,.T.); +#34975 = VERTEX_POINT('',#34976); +#34976 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#34977 = LINE('',#34978,#34979); +#34978 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#34979 = VECTOR('',#34980,1.); +#34980 = DIRECTION('',(1.,0.,0.)); +#34981 = ORIENTED_EDGE('',*,*,#34982,.T.); +#34982 = EDGE_CURVE('',#34975,#34983,#34985,.T.); +#34983 = VERTEX_POINT('',#34984); +#34984 = CARTESIAN_POINT('',(-9.,-7.89,0.)); +#34985 = LINE('',#34986,#34987); +#34986 = CARTESIAN_POINT('',(-4.275,-7.89,0.)); +#34987 = VECTOR('',#34988,1.); +#34988 = DIRECTION('',(-1.,0.,0.)); +#34989 = ORIENTED_EDGE('',*,*,#34990,.F.); +#34990 = EDGE_CURVE('',#34991,#34983,#34993,.T.); +#34991 = VERTEX_POINT('',#34992); +#34992 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#34993 = LINE('',#34994,#34995); +#34994 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#34995 = VECTOR('',#34996,1.); +#34996 = DIRECTION('',(0.,1.,0.)); +#34997 = ORIENTED_EDGE('',*,*,#34998,.T.); +#34998 = EDGE_CURVE('',#34991,#34999,#35001,.T.); +#34999 = VERTEX_POINT('',#35000); +#35000 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#35001 = LINE('',#35002,#35003); +#35002 = CARTESIAN_POINT('',(-4.5,-8.26,0.)); +#35003 = VECTOR('',#35004,1.); +#35004 = DIRECTION('',(1.,0.,0.)); +#35005 = ORIENTED_EDGE('',*,*,#35006,.T.); +#35006 = EDGE_CURVE('',#34999,#35007,#35009,.T.); +#35007 = VERTEX_POINT('',#35008); +#35008 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#35009 = LINE('',#35010,#35011); +#35010 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#35011 = VECTOR('',#35012,1.); +#35012 = DIRECTION('',(1.,0.,0.)); +#35013 = ORIENTED_EDGE('',*,*,#35014,.T.); +#35014 = EDGE_CURVE('',#35007,#35015,#35017,.T.); +#35015 = VERTEX_POINT('',#35016); +#35016 = CARTESIAN_POINT('',(-8.15,-9.16,0.)); +#35017 = LINE('',#35018,#35019); +#35018 = CARTESIAN_POINT('',(-8.15,-2.86,0.)); +#35019 = VECTOR('',#35020,1.); +#35020 = DIRECTION('',(0.,-1.,0.)); +#35021 = ORIENTED_EDGE('',*,*,#35022,.F.); +#35022 = EDGE_CURVE('',#35023,#35015,#35025,.T.); +#35023 = VERTEX_POINT('',#35024); +#35024 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#35025 = LINE('',#35026,#35027); +#35026 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#35027 = VECTOR('',#35028,1.); +#35028 = DIRECTION('',(1.,0.,0.)); +#35029 = ORIENTED_EDGE('',*,*,#35030,.T.); +#35030 = EDGE_CURVE('',#35023,#35031,#35033,.T.); +#35031 = VERTEX_POINT('',#35032); +#35032 = CARTESIAN_POINT('',(-9.,-9.16,0.)); +#35033 = LINE('',#35034,#35035); +#35034 = CARTESIAN_POINT('',(-4.275,-9.16,0.)); +#35035 = VECTOR('',#35036,1.); +#35036 = DIRECTION('',(-1.,0.,0.)); +#35037 = ORIENTED_EDGE('',*,*,#35038,.F.); +#35038 = EDGE_CURVE('',#35039,#35031,#35041,.T.); +#35039 = VERTEX_POINT('',#35040); +#35040 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#35041 = LINE('',#35042,#35043); +#35042 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35043 = VECTOR('',#35044,1.); +#35044 = DIRECTION('',(0.,1.,0.)); +#35045 = ORIENTED_EDGE('',*,*,#35046,.T.); +#35046 = EDGE_CURVE('',#35039,#35047,#35049,.T.); +#35047 = VERTEX_POINT('',#35048); +#35048 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#35049 = LINE('',#35050,#35051); +#35050 = CARTESIAN_POINT('',(-4.5,-9.53,0.)); +#35051 = VECTOR('',#35052,1.); +#35052 = DIRECTION('',(1.,0.,0.)); +#35053 = ORIENTED_EDGE('',*,*,#35054,.T.); +#35054 = EDGE_CURVE('',#35047,#35055,#35057,.T.); +#35055 = VERTEX_POINT('',#35056); +#35056 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#35057 = LINE('',#35058,#35059); +#35058 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#35059 = VECTOR('',#35060,1.); +#35060 = DIRECTION('',(1.,0.,0.)); +#35061 = ORIENTED_EDGE('',*,*,#35062,.T.); +#35062 = EDGE_CURVE('',#35055,#35063,#35065,.T.); +#35063 = VERTEX_POINT('',#35064); +#35064 = CARTESIAN_POINT('',(-8.15,-10.43,0.)); +#35065 = LINE('',#35066,#35067); +#35066 = CARTESIAN_POINT('',(-8.15,-4.13,0.)); +#35067 = VECTOR('',#35068,1.); +#35068 = DIRECTION('',(0.,-1.,0.)); +#35069 = ORIENTED_EDGE('',*,*,#35070,.F.); +#35070 = EDGE_CURVE('',#35071,#35063,#35073,.T.); +#35071 = VERTEX_POINT('',#35072); +#35072 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#35073 = LINE('',#35074,#35075); +#35074 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#35075 = VECTOR('',#35076,1.); +#35076 = DIRECTION('',(1.,0.,0.)); +#35077 = ORIENTED_EDGE('',*,*,#35078,.T.); +#35078 = EDGE_CURVE('',#35071,#35079,#35081,.T.); +#35079 = VERTEX_POINT('',#35080); +#35080 = CARTESIAN_POINT('',(-9.,-10.43,0.)); +#35081 = LINE('',#35082,#35083); +#35082 = CARTESIAN_POINT('',(-4.275,-10.43,0.)); +#35083 = VECTOR('',#35084,1.); +#35084 = DIRECTION('',(-1.,0.,0.)); +#35085 = ORIENTED_EDGE('',*,*,#35086,.F.); +#35086 = EDGE_CURVE('',#35087,#35079,#35089,.T.); +#35087 = VERTEX_POINT('',#35088); +#35088 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#35089 = LINE('',#35090,#35091); +#35090 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35091 = VECTOR('',#35092,1.); +#35092 = DIRECTION('',(0.,1.,0.)); +#35093 = ORIENTED_EDGE('',*,*,#35094,.T.); +#35094 = EDGE_CURVE('',#35087,#35095,#35097,.T.); +#35095 = VERTEX_POINT('',#35096); +#35096 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#35097 = LINE('',#35098,#35099); +#35098 = CARTESIAN_POINT('',(-4.5,-10.8,0.)); +#35099 = VECTOR('',#35100,1.); +#35100 = DIRECTION('',(1.,0.,0.)); +#35101 = ORIENTED_EDGE('',*,*,#35102,.T.); +#35102 = EDGE_CURVE('',#35095,#35103,#35105,.T.); +#35103 = VERTEX_POINT('',#35104); +#35104 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#35105 = LINE('',#35106,#35107); +#35106 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#35107 = VECTOR('',#35108,1.); +#35108 = DIRECTION('',(1.,0.,0.)); +#35109 = ORIENTED_EDGE('',*,*,#35110,.T.); +#35110 = EDGE_CURVE('',#35103,#35111,#35113,.T.); +#35111 = VERTEX_POINT('',#35112); +#35112 = CARTESIAN_POINT('',(-8.15,-11.7,0.)); +#35113 = LINE('',#35114,#35115); +#35114 = CARTESIAN_POINT('',(-8.15,-5.4,0.)); +#35115 = VECTOR('',#35116,1.); +#35116 = DIRECTION('',(0.,-1.,0.)); +#35117 = ORIENTED_EDGE('',*,*,#35118,.F.); +#35118 = EDGE_CURVE('',#35119,#35111,#35121,.T.); +#35119 = VERTEX_POINT('',#35120); +#35120 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#35121 = LINE('',#35122,#35123); +#35122 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#35123 = VECTOR('',#35124,1.); +#35124 = DIRECTION('',(1.,0.,0.)); +#35125 = ORIENTED_EDGE('',*,*,#35126,.T.); +#35126 = EDGE_CURVE('',#35119,#35127,#35129,.T.); +#35127 = VERTEX_POINT('',#35128); +#35128 = CARTESIAN_POINT('',(-9.,-11.7,0.)); +#35129 = LINE('',#35130,#35131); +#35130 = CARTESIAN_POINT('',(-4.275,-11.7,0.)); +#35131 = VECTOR('',#35132,1.); +#35132 = DIRECTION('',(-1.,0.,0.)); +#35133 = ORIENTED_EDGE('',*,*,#35134,.F.); +#35134 = EDGE_CURVE('',#35135,#35127,#35137,.T.); +#35135 = VERTEX_POINT('',#35136); +#35136 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35137 = LINE('',#35138,#35139); +#35138 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#35139 = VECTOR('',#35140,1.); +#35140 = DIRECTION('',(0.,1.,0.)); +#35141 = ORIENTED_EDGE('',*,*,#35142,.F.); +#35142 = EDGE_CURVE('',#35143,#35135,#35145,.T.); +#35143 = VERTEX_POINT('',#35144); +#35144 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#35145 = LINE('',#35146,#35147); +#35146 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35147 = VECTOR('',#35148,1.); +#35148 = DIRECTION('',(-1.,0.,0.)); +#35149 = ORIENTED_EDGE('',*,*,#35150,.T.); +#35150 = EDGE_CURVE('',#35143,#35151,#35153,.T.); +#35151 = VERTEX_POINT('',#35152); +#35152 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#35153 = LINE('',#35154,#35155); +#35154 = CARTESIAN_POINT('',(-7.435,-6.375,0.)); +#35155 = VECTOR('',#35156,1.); +#35156 = DIRECTION('',(0.,1.,0.)); +#35157 = ORIENTED_EDGE('',*,*,#35158,.T.); +#35158 = EDGE_CURVE('',#35151,#35159,#35161,.T.); +#35159 = VERTEX_POINT('',#35160); +#35160 = CARTESIAN_POINT('',(-7.435,-11.9,0.)); +#35161 = LINE('',#35162,#35163); +#35162 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#35163 = VECTOR('',#35164,1.); +#35164 = DIRECTION('',(0.,1.,0.)); +#35165 = ORIENTED_EDGE('',*,*,#35166,.T.); +#35166 = EDGE_CURVE('',#35159,#35167,#35169,.T.); +#35167 = VERTEX_POINT('',#35168); +#35168 = CARTESIAN_POINT('',(-6.535,-11.9,0.)); +#35169 = LINE('',#35170,#35171); +#35170 = CARTESIAN_POINT('',(-6.8925,-11.9,0.)); +#35171 = VECTOR('',#35172,1.); +#35172 = DIRECTION('',(1.,0.,0.)); +#35173 = ORIENTED_EDGE('',*,*,#35174,.F.); +#35174 = EDGE_CURVE('',#35175,#35167,#35177,.T.); +#35175 = VERTEX_POINT('',#35176); +#35176 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#35177 = LINE('',#35178,#35179); +#35178 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#35179 = VECTOR('',#35180,1.); +#35180 = DIRECTION('',(0.,1.,0.)); +#35181 = ORIENTED_EDGE('',*,*,#35182,.T.); +#35182 = EDGE_CURVE('',#35175,#35183,#35185,.T.); +#35183 = VERTEX_POINT('',#35184); +#35184 = CARTESIAN_POINT('',(-6.535,-12.75,0.)); +#35185 = LINE('',#35186,#35187); +#35186 = CARTESIAN_POINT('',(-6.535,-6.15,0.)); +#35187 = VECTOR('',#35188,1.); +#35188 = DIRECTION('',(0.,-1.,0.)); +#35189 = ORIENTED_EDGE('',*,*,#35190,.F.); +#35190 = EDGE_CURVE('',#35191,#35183,#35193,.T.); +#35191 = VERTEX_POINT('',#35192); +#35192 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#35193 = LINE('',#35194,#35195); +#35194 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35195 = VECTOR('',#35196,1.); +#35196 = DIRECTION('',(-1.,0.,0.)); +#35197 = ORIENTED_EDGE('',*,*,#35198,.T.); +#35198 = EDGE_CURVE('',#35191,#35199,#35201,.T.); +#35199 = VERTEX_POINT('',#35200); +#35200 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#35201 = LINE('',#35202,#35203); +#35202 = CARTESIAN_POINT('',(-6.165,-6.375,0.)); +#35203 = VECTOR('',#35204,1.); +#35204 = DIRECTION('',(0.,1.,0.)); +#35205 = ORIENTED_EDGE('',*,*,#35206,.T.); +#35206 = EDGE_CURVE('',#35199,#35207,#35209,.T.); +#35207 = VERTEX_POINT('',#35208); +#35208 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#35209 = LINE('',#35210,#35211); +#35210 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#35211 = VECTOR('',#35212,1.); +#35212 = DIRECTION('',(0.,1.,0.)); +#35213 = ORIENTED_EDGE('',*,*,#35214,.T.); +#35214 = EDGE_CURVE('',#35207,#35215,#35217,.T.); +#35215 = VERTEX_POINT('',#35216); +#35216 = CARTESIAN_POINT('',(-5.265,-11.9,0.)); +#35217 = LINE('',#35218,#35219); +#35218 = CARTESIAN_POINT('',(-5.6225,-11.9,0.)); +#35219 = VECTOR('',#35220,1.); +#35220 = DIRECTION('',(1.,0.,0.)); +#35221 = ORIENTED_EDGE('',*,*,#35222,.F.); +#35222 = EDGE_CURVE('',#35223,#35215,#35225,.T.); +#35223 = VERTEX_POINT('',#35224); +#35224 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#35225 = LINE('',#35226,#35227); +#35226 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#35227 = VECTOR('',#35228,1.); +#35228 = DIRECTION('',(0.,1.,0.)); +#35229 = ORIENTED_EDGE('',*,*,#35230,.T.); +#35230 = EDGE_CURVE('',#35223,#35231,#35233,.T.); +#35231 = VERTEX_POINT('',#35232); +#35232 = CARTESIAN_POINT('',(-5.265,-12.75,0.)); +#35233 = LINE('',#35234,#35235); +#35234 = CARTESIAN_POINT('',(-5.265,-6.15,0.)); +#35235 = VECTOR('',#35236,1.); +#35236 = DIRECTION('',(0.,-1.,0.)); +#35237 = ORIENTED_EDGE('',*,*,#35238,.F.); +#35238 = EDGE_CURVE('',#35239,#35231,#35241,.T.); +#35239 = VERTEX_POINT('',#35240); +#35240 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#35241 = LINE('',#35242,#35243); +#35242 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35243 = VECTOR('',#35244,1.); +#35244 = DIRECTION('',(-1.,0.,0.)); +#35245 = ORIENTED_EDGE('',*,*,#35246,.T.); +#35246 = EDGE_CURVE('',#35239,#35247,#35249,.T.); +#35247 = VERTEX_POINT('',#35248); +#35248 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#35249 = LINE('',#35250,#35251); +#35250 = CARTESIAN_POINT('',(-4.895,-6.375,0.)); +#35251 = VECTOR('',#35252,1.); +#35252 = DIRECTION('',(0.,1.,0.)); +#35253 = ORIENTED_EDGE('',*,*,#35254,.T.); +#35254 = EDGE_CURVE('',#35247,#35255,#35257,.T.); +#35255 = VERTEX_POINT('',#35256); +#35256 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#35257 = LINE('',#35258,#35259); +#35258 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#35259 = VECTOR('',#35260,1.); +#35260 = DIRECTION('',(0.,1.,0.)); +#35261 = ORIENTED_EDGE('',*,*,#35262,.T.); +#35262 = EDGE_CURVE('',#35255,#35263,#35265,.T.); +#35263 = VERTEX_POINT('',#35264); +#35264 = CARTESIAN_POINT('',(-3.995,-11.9,0.)); +#35265 = LINE('',#35266,#35267); +#35266 = CARTESIAN_POINT('',(-4.3525,-11.9,0.)); +#35267 = VECTOR('',#35268,1.); +#35268 = DIRECTION('',(1.,0.,0.)); +#35269 = ORIENTED_EDGE('',*,*,#35270,.F.); +#35270 = EDGE_CURVE('',#35271,#35263,#35273,.T.); +#35271 = VERTEX_POINT('',#35272); +#35272 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#35273 = LINE('',#35274,#35275); +#35274 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#35275 = VECTOR('',#35276,1.); +#35276 = DIRECTION('',(0.,1.,0.)); +#35277 = ORIENTED_EDGE('',*,*,#35278,.T.); +#35278 = EDGE_CURVE('',#35271,#35279,#35281,.T.); +#35279 = VERTEX_POINT('',#35280); +#35280 = CARTESIAN_POINT('',(-3.995,-12.75,0.)); +#35281 = LINE('',#35282,#35283); +#35282 = CARTESIAN_POINT('',(-3.995,-6.15,0.)); +#35283 = VECTOR('',#35284,1.); +#35284 = DIRECTION('',(0.,-1.,0.)); +#35285 = ORIENTED_EDGE('',*,*,#35286,.F.); +#35286 = EDGE_CURVE('',#35287,#35279,#35289,.T.); +#35287 = VERTEX_POINT('',#35288); +#35288 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#35289 = LINE('',#35290,#35291); +#35290 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35291 = VECTOR('',#35292,1.); +#35292 = DIRECTION('',(-1.,0.,0.)); +#35293 = ORIENTED_EDGE('',*,*,#35294,.T.); +#35294 = EDGE_CURVE('',#35287,#35295,#35297,.T.); +#35295 = VERTEX_POINT('',#35296); +#35296 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#35297 = LINE('',#35298,#35299); +#35298 = CARTESIAN_POINT('',(-3.625,-6.375,0.)); +#35299 = VECTOR('',#35300,1.); +#35300 = DIRECTION('',(0.,1.,0.)); +#35301 = ORIENTED_EDGE('',*,*,#35302,.T.); +#35302 = EDGE_CURVE('',#35295,#35303,#35305,.T.); +#35303 = VERTEX_POINT('',#35304); +#35304 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#35305 = LINE('',#35306,#35307); +#35306 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#35307 = VECTOR('',#35308,1.); +#35308 = DIRECTION('',(0.,1.,0.)); +#35309 = ORIENTED_EDGE('',*,*,#35310,.T.); +#35310 = EDGE_CURVE('',#35303,#35311,#35313,.T.); +#35311 = VERTEX_POINT('',#35312); +#35312 = CARTESIAN_POINT('',(-2.725,-11.9,0.)); +#35313 = LINE('',#35314,#35315); +#35314 = CARTESIAN_POINT('',(-3.0825,-11.9,0.)); +#35315 = VECTOR('',#35316,1.); +#35316 = DIRECTION('',(1.,0.,0.)); +#35317 = ORIENTED_EDGE('',*,*,#35318,.F.); +#35318 = EDGE_CURVE('',#35319,#35311,#35321,.T.); +#35319 = VERTEX_POINT('',#35320); +#35320 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#35321 = LINE('',#35322,#35323); +#35322 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#35323 = VECTOR('',#35324,1.); +#35324 = DIRECTION('',(0.,1.,0.)); +#35325 = ORIENTED_EDGE('',*,*,#35326,.T.); +#35326 = EDGE_CURVE('',#35319,#35327,#35329,.T.); +#35327 = VERTEX_POINT('',#35328); +#35328 = CARTESIAN_POINT('',(-2.725,-12.75,0.)); +#35329 = LINE('',#35330,#35331); +#35330 = CARTESIAN_POINT('',(-2.725,-6.15,0.)); +#35331 = VECTOR('',#35332,1.); +#35332 = DIRECTION('',(0.,-1.,0.)); +#35333 = ORIENTED_EDGE('',*,*,#35334,.F.); +#35334 = EDGE_CURVE('',#35335,#35327,#35337,.T.); +#35335 = VERTEX_POINT('',#35336); +#35336 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#35337 = LINE('',#35338,#35339); +#35338 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35339 = VECTOR('',#35340,1.); +#35340 = DIRECTION('',(-1.,0.,0.)); +#35341 = ORIENTED_EDGE('',*,*,#35342,.T.); +#35342 = EDGE_CURVE('',#35335,#35343,#35345,.T.); +#35343 = VERTEX_POINT('',#35344); +#35344 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#35345 = LINE('',#35346,#35347); +#35346 = CARTESIAN_POINT('',(-2.355,-6.375,0.)); +#35347 = VECTOR('',#35348,1.); +#35348 = DIRECTION('',(0.,1.,0.)); +#35349 = ORIENTED_EDGE('',*,*,#35350,.T.); +#35350 = EDGE_CURVE('',#35343,#35351,#35353,.T.); +#35351 = VERTEX_POINT('',#35352); +#35352 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#35353 = LINE('',#35354,#35355); +#35354 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#35355 = VECTOR('',#35356,1.); +#35356 = DIRECTION('',(0.,1.,0.)); +#35357 = ORIENTED_EDGE('',*,*,#35358,.T.); +#35358 = EDGE_CURVE('',#35351,#35359,#35361,.T.); +#35359 = VERTEX_POINT('',#35360); +#35360 = CARTESIAN_POINT('',(-1.455,-11.9,0.)); +#35361 = LINE('',#35362,#35363); +#35362 = CARTESIAN_POINT('',(-1.8125,-11.9,0.)); +#35363 = VECTOR('',#35364,1.); +#35364 = DIRECTION('',(1.,0.,0.)); +#35365 = ORIENTED_EDGE('',*,*,#35366,.F.); +#35366 = EDGE_CURVE('',#35367,#35359,#35369,.T.); +#35367 = VERTEX_POINT('',#35368); +#35368 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#35369 = LINE('',#35370,#35371); +#35370 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#35371 = VECTOR('',#35372,1.); +#35372 = DIRECTION('',(0.,1.,0.)); +#35373 = ORIENTED_EDGE('',*,*,#35374,.T.); +#35374 = EDGE_CURVE('',#35367,#35375,#35377,.T.); +#35375 = VERTEX_POINT('',#35376); +#35376 = CARTESIAN_POINT('',(-1.455,-12.75,0.)); +#35377 = LINE('',#35378,#35379); +#35378 = CARTESIAN_POINT('',(-1.455,-6.15,0.)); +#35379 = VECTOR('',#35380,1.); +#35380 = DIRECTION('',(0.,-1.,0.)); +#35381 = ORIENTED_EDGE('',*,*,#35382,.F.); +#35382 = EDGE_CURVE('',#35383,#35375,#35385,.T.); +#35383 = VERTEX_POINT('',#35384); +#35384 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#35385 = LINE('',#35386,#35387); +#35386 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35387 = VECTOR('',#35388,1.); +#35388 = DIRECTION('',(-1.,0.,0.)); +#35389 = ORIENTED_EDGE('',*,*,#35390,.T.); +#35390 = EDGE_CURVE('',#35383,#35391,#35393,.T.); +#35391 = VERTEX_POINT('',#35392); +#35392 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#35393 = LINE('',#35394,#35395); +#35394 = CARTESIAN_POINT('',(-1.085,-6.375,0.)); +#35395 = VECTOR('',#35396,1.); +#35396 = DIRECTION('',(0.,1.,0.)); +#35397 = ORIENTED_EDGE('',*,*,#35398,.T.); +#35398 = EDGE_CURVE('',#35391,#35399,#35401,.T.); +#35399 = VERTEX_POINT('',#35400); +#35400 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#35401 = LINE('',#35402,#35403); +#35402 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#35403 = VECTOR('',#35404,1.); +#35404 = DIRECTION('',(0.,1.,0.)); +#35405 = ORIENTED_EDGE('',*,*,#35406,.T.); +#35406 = EDGE_CURVE('',#35399,#35407,#35409,.T.); +#35407 = VERTEX_POINT('',#35408); +#35408 = CARTESIAN_POINT('',(-0.185,-11.9,0.)); +#35409 = LINE('',#35410,#35411); +#35410 = CARTESIAN_POINT('',(-0.5425,-11.9,0.)); +#35411 = VECTOR('',#35412,1.); +#35412 = DIRECTION('',(1.,0.,0.)); +#35413 = ORIENTED_EDGE('',*,*,#35414,.F.); +#35414 = EDGE_CURVE('',#35415,#35407,#35417,.T.); +#35415 = VERTEX_POINT('',#35416); +#35416 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#35417 = LINE('',#35418,#35419); +#35418 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#35419 = VECTOR('',#35420,1.); +#35420 = DIRECTION('',(0.,1.,0.)); +#35421 = ORIENTED_EDGE('',*,*,#35422,.T.); +#35422 = EDGE_CURVE('',#35415,#35423,#35425,.T.); +#35423 = VERTEX_POINT('',#35424); +#35424 = CARTESIAN_POINT('',(-0.185,-12.75,0.)); +#35425 = LINE('',#35426,#35427); +#35426 = CARTESIAN_POINT('',(-0.185,-6.15,0.)); +#35427 = VECTOR('',#35428,1.); +#35428 = DIRECTION('',(0.,-1.,0.)); +#35429 = ORIENTED_EDGE('',*,*,#35430,.F.); +#35430 = EDGE_CURVE('',#35431,#35423,#35433,.T.); +#35431 = VERTEX_POINT('',#35432); +#35432 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#35433 = LINE('',#35434,#35435); +#35434 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35435 = VECTOR('',#35436,1.); +#35436 = DIRECTION('',(-1.,0.,0.)); +#35437 = ORIENTED_EDGE('',*,*,#35438,.F.); +#35438 = EDGE_CURVE('',#35439,#35431,#35441,.T.); +#35439 = VERTEX_POINT('',#35440); +#35440 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#35441 = LINE('',#35442,#35443); +#35442 = CARTESIAN_POINT('',(0.185,-6.15,0.)); +#35443 = VECTOR('',#35444,1.); +#35444 = DIRECTION('',(0.,-1.,0.)); +#35445 = ORIENTED_EDGE('',*,*,#35446,.T.); +#35446 = EDGE_CURVE('',#35439,#35447,#35449,.T.); +#35447 = VERTEX_POINT('',#35448); +#35448 = CARTESIAN_POINT('',(0.185,-11.9,0.)); +#35449 = LINE('',#35450,#35451); +#35450 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#35451 = VECTOR('',#35452,1.); +#35452 = DIRECTION('',(0.,1.,0.)); +#35453 = ORIENTED_EDGE('',*,*,#35454,.F.); +#35454 = EDGE_CURVE('',#35455,#35447,#35457,.T.); +#35455 = VERTEX_POINT('',#35456); +#35456 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#35457 = LINE('',#35458,#35459); +#35458 = CARTESIAN_POINT('',(0.5425,-11.9,0.)); +#35459 = VECTOR('',#35460,1.); +#35460 = DIRECTION('',(-1.,-0.,-0.)); +#35461 = ORIENTED_EDGE('',*,*,#35462,.F.); +#35462 = EDGE_CURVE('',#35463,#35455,#35465,.T.); +#35463 = VERTEX_POINT('',#35464); +#35464 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#35465 = LINE('',#35466,#35467); +#35466 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#35467 = VECTOR('',#35468,1.); +#35468 = DIRECTION('',(0.,1.,0.)); +#35469 = ORIENTED_EDGE('',*,*,#35470,.F.); +#35470 = EDGE_CURVE('',#35471,#35463,#35473,.T.); +#35471 = VERTEX_POINT('',#35472); +#35472 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#35473 = LINE('',#35474,#35475); +#35474 = CARTESIAN_POINT('',(1.085,-6.375,0.)); +#35475 = VECTOR('',#35476,1.); +#35476 = DIRECTION('',(0.,1.,0.)); +#35477 = ORIENTED_EDGE('',*,*,#35478,.F.); +#35478 = EDGE_CURVE('',#35479,#35471,#35481,.T.); +#35479 = VERTEX_POINT('',#35480); +#35480 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#35481 = LINE('',#35482,#35483); +#35482 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35483 = VECTOR('',#35484,1.); +#35484 = DIRECTION('',(-1.,0.,0.)); +#35485 = ORIENTED_EDGE('',*,*,#35486,.F.); +#35486 = EDGE_CURVE('',#35487,#35479,#35489,.T.); +#35487 = VERTEX_POINT('',#35488); +#35488 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#35489 = LINE('',#35490,#35491); +#35490 = CARTESIAN_POINT('',(1.455,-6.15,0.)); +#35491 = VECTOR('',#35492,1.); +#35492 = DIRECTION('',(0.,-1.,0.)); +#35493 = ORIENTED_EDGE('',*,*,#35494,.T.); +#35494 = EDGE_CURVE('',#35487,#35495,#35497,.T.); +#35495 = VERTEX_POINT('',#35496); +#35496 = CARTESIAN_POINT('',(1.455,-11.9,0.)); +#35497 = LINE('',#35498,#35499); +#35498 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#35499 = VECTOR('',#35500,1.); +#35500 = DIRECTION('',(0.,1.,0.)); +#35501 = ORIENTED_EDGE('',*,*,#35502,.F.); +#35502 = EDGE_CURVE('',#35503,#35495,#35505,.T.); +#35503 = VERTEX_POINT('',#35504); +#35504 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#35505 = LINE('',#35506,#35507); +#35506 = CARTESIAN_POINT('',(1.8125,-11.9,0.)); +#35507 = VECTOR('',#35508,1.); +#35508 = DIRECTION('',(-1.,-0.,-0.)); +#35509 = ORIENTED_EDGE('',*,*,#35510,.F.); +#35510 = EDGE_CURVE('',#35511,#35503,#35513,.T.); +#35511 = VERTEX_POINT('',#35512); +#35512 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#35513 = LINE('',#35514,#35515); +#35514 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#35515 = VECTOR('',#35516,1.); +#35516 = DIRECTION('',(0.,1.,0.)); +#35517 = ORIENTED_EDGE('',*,*,#35518,.F.); +#35518 = EDGE_CURVE('',#35519,#35511,#35521,.T.); +#35519 = VERTEX_POINT('',#35520); +#35520 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#35521 = LINE('',#35522,#35523); +#35522 = CARTESIAN_POINT('',(2.355,-6.375,0.)); +#35523 = VECTOR('',#35524,1.); +#35524 = DIRECTION('',(0.,1.,0.)); +#35525 = ORIENTED_EDGE('',*,*,#35526,.F.); +#35526 = EDGE_CURVE('',#35527,#35519,#35529,.T.); +#35527 = VERTEX_POINT('',#35528); +#35528 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#35529 = LINE('',#35530,#35531); +#35530 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35531 = VECTOR('',#35532,1.); +#35532 = DIRECTION('',(-1.,0.,0.)); +#35533 = ORIENTED_EDGE('',*,*,#35534,.F.); +#35534 = EDGE_CURVE('',#35535,#35527,#35537,.T.); +#35535 = VERTEX_POINT('',#35536); +#35536 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#35537 = LINE('',#35538,#35539); +#35538 = CARTESIAN_POINT('',(2.725,-6.15,0.)); +#35539 = VECTOR('',#35540,1.); +#35540 = DIRECTION('',(0.,-1.,0.)); +#35541 = ORIENTED_EDGE('',*,*,#35542,.T.); +#35542 = EDGE_CURVE('',#35535,#35543,#35545,.T.); +#35543 = VERTEX_POINT('',#35544); +#35544 = CARTESIAN_POINT('',(2.725,-11.9,0.)); +#35545 = LINE('',#35546,#35547); +#35546 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#35547 = VECTOR('',#35548,1.); +#35548 = DIRECTION('',(0.,1.,0.)); +#35549 = ORIENTED_EDGE('',*,*,#35550,.F.); +#35550 = EDGE_CURVE('',#35551,#35543,#35553,.T.); +#35551 = VERTEX_POINT('',#35552); +#35552 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#35553 = LINE('',#35554,#35555); +#35554 = CARTESIAN_POINT('',(3.0825,-11.9,0.)); +#35555 = VECTOR('',#35556,1.); +#35556 = DIRECTION('',(-1.,-0.,-0.)); +#35557 = ORIENTED_EDGE('',*,*,#35558,.F.); +#35558 = EDGE_CURVE('',#35559,#35551,#35561,.T.); +#35559 = VERTEX_POINT('',#35560); +#35560 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#35561 = LINE('',#35562,#35563); +#35562 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#35563 = VECTOR('',#35564,1.); +#35564 = DIRECTION('',(0.,1.,0.)); +#35565 = ORIENTED_EDGE('',*,*,#35566,.F.); +#35566 = EDGE_CURVE('',#35567,#35559,#35569,.T.); +#35567 = VERTEX_POINT('',#35568); +#35568 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#35569 = LINE('',#35570,#35571); +#35570 = CARTESIAN_POINT('',(3.625,-6.375,0.)); +#35571 = VECTOR('',#35572,1.); +#35572 = DIRECTION('',(0.,1.,0.)); +#35573 = ORIENTED_EDGE('',*,*,#35574,.F.); +#35574 = EDGE_CURVE('',#35575,#35567,#35577,.T.); +#35575 = VERTEX_POINT('',#35576); +#35576 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#35577 = LINE('',#35578,#35579); +#35578 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35579 = VECTOR('',#35580,1.); +#35580 = DIRECTION('',(-1.,0.,0.)); +#35581 = ORIENTED_EDGE('',*,*,#35582,.F.); +#35582 = EDGE_CURVE('',#35583,#35575,#35585,.T.); +#35583 = VERTEX_POINT('',#35584); +#35584 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#35585 = LINE('',#35586,#35587); +#35586 = CARTESIAN_POINT('',(3.995,-6.15,0.)); +#35587 = VECTOR('',#35588,1.); +#35588 = DIRECTION('',(0.,-1.,0.)); +#35589 = ORIENTED_EDGE('',*,*,#35590,.T.); +#35590 = EDGE_CURVE('',#35583,#35591,#35593,.T.); +#35591 = VERTEX_POINT('',#35592); +#35592 = CARTESIAN_POINT('',(3.995,-11.9,0.)); +#35593 = LINE('',#35594,#35595); +#35594 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#35595 = VECTOR('',#35596,1.); +#35596 = DIRECTION('',(0.,1.,0.)); +#35597 = ORIENTED_EDGE('',*,*,#35598,.F.); +#35598 = EDGE_CURVE('',#35599,#35591,#35601,.T.); +#35599 = VERTEX_POINT('',#35600); +#35600 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#35601 = LINE('',#35602,#35603); +#35602 = CARTESIAN_POINT('',(4.3525,-11.9,0.)); +#35603 = VECTOR('',#35604,1.); +#35604 = DIRECTION('',(-1.,-0.,-0.)); +#35605 = ORIENTED_EDGE('',*,*,#35606,.F.); +#35606 = EDGE_CURVE('',#35607,#35599,#35609,.T.); +#35607 = VERTEX_POINT('',#35608); +#35608 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#35609 = LINE('',#35610,#35611); +#35610 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#35611 = VECTOR('',#35612,1.); +#35612 = DIRECTION('',(0.,1.,0.)); +#35613 = ORIENTED_EDGE('',*,*,#35614,.F.); +#35614 = EDGE_CURVE('',#35615,#35607,#35617,.T.); +#35615 = VERTEX_POINT('',#35616); +#35616 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#35617 = LINE('',#35618,#35619); +#35618 = CARTESIAN_POINT('',(4.895,-6.375,0.)); +#35619 = VECTOR('',#35620,1.); +#35620 = DIRECTION('',(0.,1.,0.)); +#35621 = ORIENTED_EDGE('',*,*,#35622,.F.); +#35622 = EDGE_CURVE('',#35623,#35615,#35625,.T.); +#35623 = VERTEX_POINT('',#35624); +#35624 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#35625 = LINE('',#35626,#35627); +#35626 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35627 = VECTOR('',#35628,1.); +#35628 = DIRECTION('',(-1.,0.,0.)); +#35629 = ORIENTED_EDGE('',*,*,#35630,.F.); +#35630 = EDGE_CURVE('',#35631,#35623,#35633,.T.); +#35631 = VERTEX_POINT('',#35632); +#35632 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#35633 = LINE('',#35634,#35635); +#35634 = CARTESIAN_POINT('',(5.265,-6.15,0.)); +#35635 = VECTOR('',#35636,1.); +#35636 = DIRECTION('',(0.,-1.,0.)); +#35637 = ORIENTED_EDGE('',*,*,#35638,.T.); +#35638 = EDGE_CURVE('',#35631,#35639,#35641,.T.); +#35639 = VERTEX_POINT('',#35640); +#35640 = CARTESIAN_POINT('',(5.265,-11.9,0.)); +#35641 = LINE('',#35642,#35643); +#35642 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#35643 = VECTOR('',#35644,1.); +#35644 = DIRECTION('',(0.,1.,0.)); +#35645 = ORIENTED_EDGE('',*,*,#35646,.F.); +#35646 = EDGE_CURVE('',#35647,#35639,#35649,.T.); +#35647 = VERTEX_POINT('',#35648); +#35648 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#35649 = LINE('',#35650,#35651); +#35650 = CARTESIAN_POINT('',(5.6225,-11.9,0.)); +#35651 = VECTOR('',#35652,1.); +#35652 = DIRECTION('',(-1.,-0.,-0.)); +#35653 = ORIENTED_EDGE('',*,*,#35654,.F.); +#35654 = EDGE_CURVE('',#35655,#35647,#35657,.T.); +#35655 = VERTEX_POINT('',#35656); +#35656 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#35657 = LINE('',#35658,#35659); +#35658 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#35659 = VECTOR('',#35660,1.); +#35660 = DIRECTION('',(0.,1.,0.)); +#35661 = ORIENTED_EDGE('',*,*,#35662,.F.); +#35662 = EDGE_CURVE('',#35663,#35655,#35665,.T.); +#35663 = VERTEX_POINT('',#35664); +#35664 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#35665 = LINE('',#35666,#35667); +#35666 = CARTESIAN_POINT('',(6.165,-6.375,0.)); +#35667 = VECTOR('',#35668,1.); +#35668 = DIRECTION('',(0.,1.,0.)); +#35669 = ORIENTED_EDGE('',*,*,#35670,.F.); +#35670 = EDGE_CURVE('',#35671,#35663,#35673,.T.); +#35671 = VERTEX_POINT('',#35672); +#35672 = CARTESIAN_POINT('',(6.535,-12.75,0.)); +#35673 = LINE('',#35674,#35675); +#35674 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35675 = VECTOR('',#35676,1.); +#35676 = DIRECTION('',(-1.,0.,0.)); +#35677 = ORIENTED_EDGE('',*,*,#35678,.F.); +#35678 = EDGE_CURVE('',#35679,#35671,#35681,.T.); +#35679 = VERTEX_POINT('',#35680); +#35680 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#35681 = LINE('',#35682,#35683); +#35682 = CARTESIAN_POINT('',(6.535,-6.15,0.)); +#35683 = VECTOR('',#35684,1.); +#35684 = DIRECTION('',(0.,-1.,0.)); +#35685 = ORIENTED_EDGE('',*,*,#35686,.T.); +#35686 = EDGE_CURVE('',#35679,#35687,#35689,.T.); +#35687 = VERTEX_POINT('',#35688); +#35688 = CARTESIAN_POINT('',(6.535,-11.9,0.)); +#35689 = LINE('',#35690,#35691); +#35690 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#35691 = VECTOR('',#35692,1.); +#35692 = DIRECTION('',(0.,1.,0.)); +#35693 = ORIENTED_EDGE('',*,*,#35694,.F.); +#35694 = EDGE_CURVE('',#35695,#35687,#35697,.T.); +#35695 = VERTEX_POINT('',#35696); +#35696 = CARTESIAN_POINT('',(7.435,-11.9,0.)); +#35697 = LINE('',#35698,#35699); +#35698 = CARTESIAN_POINT('',(6.8925,-11.9,0.)); +#35699 = VECTOR('',#35700,1.); +#35700 = DIRECTION('',(-1.,-0.,-0.)); +#35701 = ORIENTED_EDGE('',*,*,#35702,.F.); +#35702 = EDGE_CURVE('',#35703,#35695,#35705,.T.); +#35703 = VERTEX_POINT('',#35704); +#35704 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#35705 = LINE('',#35706,#35707); +#35706 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#35707 = VECTOR('',#35708,1.); +#35708 = DIRECTION('',(0.,1.,0.)); +#35709 = ORIENTED_EDGE('',*,*,#35710,.F.); +#35710 = EDGE_CURVE('',#35711,#35703,#35713,.T.); +#35711 = VERTEX_POINT('',#35712); +#35712 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#35713 = LINE('',#35714,#35715); +#35714 = CARTESIAN_POINT('',(7.435,-6.375,0.)); +#35715 = VECTOR('',#35716,1.); +#35716 = DIRECTION('',(0.,1.,0.)); +#35717 = ORIENTED_EDGE('',*,*,#35718,.F.); +#35718 = EDGE_CURVE('',#35719,#35711,#35721,.T.); +#35719 = VERTEX_POINT('',#35720); +#35720 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35721 = LINE('',#35722,#35723); +#35722 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#35723 = VECTOR('',#35724,1.); +#35724 = DIRECTION('',(-1.,0.,0.)); +#35725 = ORIENTED_EDGE('',*,*,#35726,.F.); +#35726 = EDGE_CURVE('',#35727,#35719,#35729,.T.); +#35727 = VERTEX_POINT('',#35728); +#35728 = CARTESIAN_POINT('',(9.,-11.7,0.)); +#35729 = LINE('',#35730,#35731); +#35730 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35731 = VECTOR('',#35732,1.); +#35732 = DIRECTION('',(0.,-1.,0.)); +#35733 = ORIENTED_EDGE('',*,*,#35734,.F.); +#35734 = EDGE_CURVE('',#35735,#35727,#35737,.T.); +#35735 = VERTEX_POINT('',#35736); +#35736 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#35737 = LINE('',#35738,#35739); +#35738 = CARTESIAN_POINT('',(4.275,-11.7,0.)); +#35739 = VECTOR('',#35740,1.); +#35740 = DIRECTION('',(1.,0.,0.)); +#35741 = ORIENTED_EDGE('',*,*,#35742,.T.); +#35742 = EDGE_CURVE('',#35735,#35743,#35745,.T.); +#35743 = VERTEX_POINT('',#35744); +#35744 = CARTESIAN_POINT('',(8.15,-11.7,0.)); +#35745 = LINE('',#35746,#35747); +#35746 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#35747 = VECTOR('',#35748,1.); +#35748 = DIRECTION('',(-1.,-0.,-0.)); +#35749 = ORIENTED_EDGE('',*,*,#35750,.F.); +#35750 = EDGE_CURVE('',#35751,#35743,#35753,.T.); +#35751 = VERTEX_POINT('',#35752); +#35752 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#35753 = LINE('',#35754,#35755); +#35754 = CARTESIAN_POINT('',(8.15,-5.4,0.)); +#35755 = VECTOR('',#35756,1.); +#35756 = DIRECTION('',(-0.,-1.,-0.)); +#35757 = ORIENTED_EDGE('',*,*,#35758,.F.); +#35758 = EDGE_CURVE('',#35759,#35751,#35761,.T.); +#35759 = VERTEX_POINT('',#35760); +#35760 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#35761 = LINE('',#35762,#35763); +#35762 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#35763 = VECTOR('',#35764,1.); +#35764 = DIRECTION('',(-1.,-0.,-0.)); +#35765 = ORIENTED_EDGE('',*,*,#35766,.F.); +#35766 = EDGE_CURVE('',#35767,#35759,#35769,.T.); +#35767 = VERTEX_POINT('',#35768); +#35768 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#35769 = LINE('',#35770,#35771); +#35770 = CARTESIAN_POINT('',(4.5,-10.8,0.)); +#35771 = VECTOR('',#35772,1.); +#35772 = DIRECTION('',(-1.,0.,0.)); +#35773 = ORIENTED_EDGE('',*,*,#35774,.F.); +#35774 = EDGE_CURVE('',#35775,#35767,#35777,.T.); +#35775 = VERTEX_POINT('',#35776); +#35776 = CARTESIAN_POINT('',(9.,-10.43,0.)); +#35777 = LINE('',#35778,#35779); +#35778 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35779 = VECTOR('',#35780,1.); +#35780 = DIRECTION('',(0.,-1.,0.)); +#35781 = ORIENTED_EDGE('',*,*,#35782,.F.); +#35782 = EDGE_CURVE('',#35783,#35775,#35785,.T.); +#35783 = VERTEX_POINT('',#35784); +#35784 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#35785 = LINE('',#35786,#35787); +#35786 = CARTESIAN_POINT('',(4.275,-10.43,0.)); +#35787 = VECTOR('',#35788,1.); +#35788 = DIRECTION('',(1.,0.,0.)); +#35789 = ORIENTED_EDGE('',*,*,#35790,.T.); +#35790 = EDGE_CURVE('',#35783,#35791,#35793,.T.); +#35791 = VERTEX_POINT('',#35792); +#35792 = CARTESIAN_POINT('',(8.15,-10.43,0.)); +#35793 = LINE('',#35794,#35795); +#35794 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#35795 = VECTOR('',#35796,1.); +#35796 = DIRECTION('',(-1.,-0.,-0.)); +#35797 = ORIENTED_EDGE('',*,*,#35798,.F.); +#35798 = EDGE_CURVE('',#35799,#35791,#35801,.T.); +#35799 = VERTEX_POINT('',#35800); +#35800 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#35801 = LINE('',#35802,#35803); +#35802 = CARTESIAN_POINT('',(8.15,-4.13,0.)); +#35803 = VECTOR('',#35804,1.); +#35804 = DIRECTION('',(-0.,-1.,-0.)); +#35805 = ORIENTED_EDGE('',*,*,#35806,.F.); +#35806 = EDGE_CURVE('',#35807,#35799,#35809,.T.); +#35807 = VERTEX_POINT('',#35808); +#35808 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#35809 = LINE('',#35810,#35811); +#35810 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#35811 = VECTOR('',#35812,1.); +#35812 = DIRECTION('',(-1.,-0.,-0.)); +#35813 = ORIENTED_EDGE('',*,*,#35814,.F.); +#35814 = EDGE_CURVE('',#35815,#35807,#35817,.T.); +#35815 = VERTEX_POINT('',#35816); +#35816 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#35817 = LINE('',#35818,#35819); +#35818 = CARTESIAN_POINT('',(4.5,-9.53,0.)); +#35819 = VECTOR('',#35820,1.); +#35820 = DIRECTION('',(-1.,0.,0.)); +#35821 = ORIENTED_EDGE('',*,*,#35822,.F.); +#35822 = EDGE_CURVE('',#35823,#35815,#35825,.T.); +#35823 = VERTEX_POINT('',#35824); +#35824 = CARTESIAN_POINT('',(9.,-9.16,0.)); +#35825 = LINE('',#35826,#35827); +#35826 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35827 = VECTOR('',#35828,1.); +#35828 = DIRECTION('',(0.,-1.,0.)); +#35829 = ORIENTED_EDGE('',*,*,#35830,.F.); +#35830 = EDGE_CURVE('',#35831,#35823,#35833,.T.); +#35831 = VERTEX_POINT('',#35832); +#35832 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#35833 = LINE('',#35834,#35835); +#35834 = CARTESIAN_POINT('',(4.275,-9.16,0.)); +#35835 = VECTOR('',#35836,1.); +#35836 = DIRECTION('',(1.,0.,0.)); +#35837 = ORIENTED_EDGE('',*,*,#35838,.T.); +#35838 = EDGE_CURVE('',#35831,#35839,#35841,.T.); +#35839 = VERTEX_POINT('',#35840); +#35840 = CARTESIAN_POINT('',(8.15,-9.16,0.)); +#35841 = LINE('',#35842,#35843); +#35842 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#35843 = VECTOR('',#35844,1.); +#35844 = DIRECTION('',(-1.,-0.,-0.)); +#35845 = ORIENTED_EDGE('',*,*,#35846,.F.); +#35846 = EDGE_CURVE('',#35847,#35839,#35849,.T.); +#35847 = VERTEX_POINT('',#35848); +#35848 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#35849 = LINE('',#35850,#35851); +#35850 = CARTESIAN_POINT('',(8.15,-2.86,0.)); +#35851 = VECTOR('',#35852,1.); +#35852 = DIRECTION('',(-0.,-1.,-0.)); +#35853 = ORIENTED_EDGE('',*,*,#35854,.F.); +#35854 = EDGE_CURVE('',#35855,#35847,#35857,.T.); +#35855 = VERTEX_POINT('',#35856); +#35856 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#35857 = LINE('',#35858,#35859); +#35858 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#35859 = VECTOR('',#35860,1.); +#35860 = DIRECTION('',(-1.,-0.,-0.)); +#35861 = ORIENTED_EDGE('',*,*,#35862,.F.); +#35862 = EDGE_CURVE('',#35863,#35855,#35865,.T.); +#35863 = VERTEX_POINT('',#35864); +#35864 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#35865 = LINE('',#35866,#35867); +#35866 = CARTESIAN_POINT('',(4.5,-8.26,0.)); +#35867 = VECTOR('',#35868,1.); +#35868 = DIRECTION('',(-1.,0.,0.)); +#35869 = ORIENTED_EDGE('',*,*,#35870,.F.); +#35870 = EDGE_CURVE('',#35871,#35863,#35873,.T.); +#35871 = VERTEX_POINT('',#35872); +#35872 = CARTESIAN_POINT('',(9.,-7.89,0.)); +#35873 = LINE('',#35874,#35875); +#35874 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35875 = VECTOR('',#35876,1.); +#35876 = DIRECTION('',(0.,-1.,0.)); +#35877 = ORIENTED_EDGE('',*,*,#35878,.F.); +#35878 = EDGE_CURVE('',#35879,#35871,#35881,.T.); +#35879 = VERTEX_POINT('',#35880); +#35880 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#35881 = LINE('',#35882,#35883); +#35882 = CARTESIAN_POINT('',(4.275,-7.89,0.)); +#35883 = VECTOR('',#35884,1.); +#35884 = DIRECTION('',(1.,0.,0.)); +#35885 = ORIENTED_EDGE('',*,*,#35886,.T.); +#35886 = EDGE_CURVE('',#35879,#35887,#35889,.T.); +#35887 = VERTEX_POINT('',#35888); +#35888 = CARTESIAN_POINT('',(8.15,-7.89,0.)); +#35889 = LINE('',#35890,#35891); +#35890 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#35891 = VECTOR('',#35892,1.); +#35892 = DIRECTION('',(-1.,-0.,-0.)); +#35893 = ORIENTED_EDGE('',*,*,#35894,.F.); +#35894 = EDGE_CURVE('',#35895,#35887,#35897,.T.); +#35895 = VERTEX_POINT('',#35896); +#35896 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#35897 = LINE('',#35898,#35899); +#35898 = CARTESIAN_POINT('',(8.15,-1.59,0.)); +#35899 = VECTOR('',#35900,1.); +#35900 = DIRECTION('',(-0.,-1.,-0.)); +#35901 = ORIENTED_EDGE('',*,*,#35902,.F.); +#35902 = EDGE_CURVE('',#35903,#35895,#35905,.T.); +#35903 = VERTEX_POINT('',#35904); +#35904 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#35905 = LINE('',#35906,#35907); +#35906 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#35907 = VECTOR('',#35908,1.); +#35908 = DIRECTION('',(-1.,-0.,-0.)); +#35909 = ORIENTED_EDGE('',*,*,#35910,.F.); +#35910 = EDGE_CURVE('',#35911,#35903,#35913,.T.); +#35911 = VERTEX_POINT('',#35912); +#35912 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#35913 = LINE('',#35914,#35915); +#35914 = CARTESIAN_POINT('',(4.5,-6.99,0.)); +#35915 = VECTOR('',#35916,1.); +#35916 = DIRECTION('',(-1.,0.,0.)); +#35917 = ORIENTED_EDGE('',*,*,#35918,.F.); +#35918 = EDGE_CURVE('',#35919,#35911,#35921,.T.); +#35919 = VERTEX_POINT('',#35920); +#35920 = CARTESIAN_POINT('',(9.,-6.62,0.)); +#35921 = LINE('',#35922,#35923); +#35922 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35923 = VECTOR('',#35924,1.); +#35924 = DIRECTION('',(0.,-1.,0.)); +#35925 = ORIENTED_EDGE('',*,*,#35926,.F.); +#35926 = EDGE_CURVE('',#35927,#35919,#35929,.T.); +#35927 = VERTEX_POINT('',#35928); +#35928 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#35929 = LINE('',#35930,#35931); +#35930 = CARTESIAN_POINT('',(4.275,-6.62,0.)); +#35931 = VECTOR('',#35932,1.); +#35932 = DIRECTION('',(1.,0.,0.)); +#35933 = ORIENTED_EDGE('',*,*,#35934,.T.); +#35934 = EDGE_CURVE('',#35927,#35935,#35937,.T.); +#35935 = VERTEX_POINT('',#35936); +#35936 = CARTESIAN_POINT('',(8.15,-6.62,0.)); +#35937 = LINE('',#35938,#35939); +#35938 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#35939 = VECTOR('',#35940,1.); +#35940 = DIRECTION('',(-1.,-0.,-0.)); +#35941 = ORIENTED_EDGE('',*,*,#35942,.F.); +#35942 = EDGE_CURVE('',#35943,#35935,#35945,.T.); +#35943 = VERTEX_POINT('',#35944); +#35944 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#35945 = LINE('',#35946,#35947); +#35946 = CARTESIAN_POINT('',(8.15,-0.32,0.)); +#35947 = VECTOR('',#35948,1.); +#35948 = DIRECTION('',(-0.,-1.,-0.)); +#35949 = ORIENTED_EDGE('',*,*,#35950,.F.); +#35950 = EDGE_CURVE('',#35951,#35943,#35953,.T.); +#35951 = VERTEX_POINT('',#35952); +#35952 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#35953 = LINE('',#35954,#35955); +#35954 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#35955 = VECTOR('',#35956,1.); +#35956 = DIRECTION('',(-1.,-0.,-0.)); +#35957 = ORIENTED_EDGE('',*,*,#35958,.F.); +#35958 = EDGE_CURVE('',#35959,#35951,#35961,.T.); +#35959 = VERTEX_POINT('',#35960); +#35960 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#35961 = LINE('',#35962,#35963); +#35962 = CARTESIAN_POINT('',(4.5,-5.72,0.)); +#35963 = VECTOR('',#35964,1.); +#35964 = DIRECTION('',(-1.,0.,0.)); +#35965 = ORIENTED_EDGE('',*,*,#35966,.F.); +#35966 = EDGE_CURVE('',#35967,#35959,#35969,.T.); +#35967 = VERTEX_POINT('',#35968); +#35968 = CARTESIAN_POINT('',(9.,-5.35,0.)); +#35969 = LINE('',#35970,#35971); +#35970 = CARTESIAN_POINT('',(9.,12.75,0.)); +#35971 = VECTOR('',#35972,1.); +#35972 = DIRECTION('',(0.,-1.,0.)); +#35973 = ORIENTED_EDGE('',*,*,#35974,.F.); +#35974 = EDGE_CURVE('',#35975,#35967,#35977,.T.); +#35975 = VERTEX_POINT('',#35976); +#35976 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#35977 = LINE('',#35978,#35979); +#35978 = CARTESIAN_POINT('',(4.275,-5.35,0.)); +#35979 = VECTOR('',#35980,1.); +#35980 = DIRECTION('',(1.,0.,0.)); +#35981 = ORIENTED_EDGE('',*,*,#35982,.T.); +#35982 = EDGE_CURVE('',#35975,#35983,#35985,.T.); +#35983 = VERTEX_POINT('',#35984); +#35984 = CARTESIAN_POINT('',(8.15,-5.35,0.)); +#35985 = LINE('',#35986,#35987); +#35986 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#35987 = VECTOR('',#35988,1.); +#35988 = DIRECTION('',(-1.,-0.,-0.)); +#35989 = ORIENTED_EDGE('',*,*,#35990,.F.); +#35990 = EDGE_CURVE('',#35991,#35983,#35993,.T.); +#35991 = VERTEX_POINT('',#35992); +#35992 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#35993 = LINE('',#35994,#35995); +#35994 = CARTESIAN_POINT('',(8.15,0.95,0.)); +#35995 = VECTOR('',#35996,1.); +#35996 = DIRECTION('',(-0.,-1.,-0.)); +#35997 = ORIENTED_EDGE('',*,*,#35998,.F.); +#35998 = EDGE_CURVE('',#35999,#35991,#36001,.T.); +#35999 = VERTEX_POINT('',#36000); +#36000 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#36001 = LINE('',#36002,#36003); +#36002 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#36003 = VECTOR('',#36004,1.); +#36004 = DIRECTION('',(-1.,-0.,-0.)); +#36005 = ORIENTED_EDGE('',*,*,#36006,.F.); +#36006 = EDGE_CURVE('',#36007,#35999,#36009,.T.); +#36007 = VERTEX_POINT('',#36008); +#36008 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#36009 = LINE('',#36010,#36011); +#36010 = CARTESIAN_POINT('',(4.5,-4.45,0.)); +#36011 = VECTOR('',#36012,1.); +#36012 = DIRECTION('',(-1.,0.,0.)); +#36013 = ORIENTED_EDGE('',*,*,#36014,.F.); +#36014 = EDGE_CURVE('',#36015,#36007,#36017,.T.); +#36015 = VERTEX_POINT('',#36016); +#36016 = CARTESIAN_POINT('',(9.,-4.08,0.)); +#36017 = LINE('',#36018,#36019); +#36018 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36019 = VECTOR('',#36020,1.); +#36020 = DIRECTION('',(0.,-1.,0.)); +#36021 = ORIENTED_EDGE('',*,*,#36022,.F.); +#36022 = EDGE_CURVE('',#36023,#36015,#36025,.T.); +#36023 = VERTEX_POINT('',#36024); +#36024 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#36025 = LINE('',#36026,#36027); +#36026 = CARTESIAN_POINT('',(4.275,-4.08,0.)); +#36027 = VECTOR('',#36028,1.); +#36028 = DIRECTION('',(1.,0.,0.)); +#36029 = ORIENTED_EDGE('',*,*,#36030,.T.); +#36030 = EDGE_CURVE('',#36023,#36031,#36033,.T.); +#36031 = VERTEX_POINT('',#36032); +#36032 = CARTESIAN_POINT('',(8.15,-4.08,0.)); +#36033 = LINE('',#36034,#36035); +#36034 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#36035 = VECTOR('',#36036,1.); +#36036 = DIRECTION('',(-1.,-0.,-0.)); +#36037 = ORIENTED_EDGE('',*,*,#36038,.F.); +#36038 = EDGE_CURVE('',#36039,#36031,#36041,.T.); +#36039 = VERTEX_POINT('',#36040); +#36040 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#36041 = LINE('',#36042,#36043); +#36042 = CARTESIAN_POINT('',(8.15,2.22,0.)); +#36043 = VECTOR('',#36044,1.); +#36044 = DIRECTION('',(-0.,-1.,-0.)); +#36045 = ORIENTED_EDGE('',*,*,#36046,.F.); +#36046 = EDGE_CURVE('',#36047,#36039,#36049,.T.); +#36047 = VERTEX_POINT('',#36048); +#36048 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#36049 = LINE('',#36050,#36051); +#36050 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#36051 = VECTOR('',#36052,1.); +#36052 = DIRECTION('',(-1.,-0.,-0.)); +#36053 = ORIENTED_EDGE('',*,*,#36054,.F.); +#36054 = EDGE_CURVE('',#36055,#36047,#36057,.T.); +#36055 = VERTEX_POINT('',#36056); +#36056 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#36057 = LINE('',#36058,#36059); +#36058 = CARTESIAN_POINT('',(4.5,-3.18,0.)); +#36059 = VECTOR('',#36060,1.); +#36060 = DIRECTION('',(-1.,0.,0.)); +#36061 = ORIENTED_EDGE('',*,*,#36062,.F.); +#36062 = EDGE_CURVE('',#36063,#36055,#36065,.T.); +#36063 = VERTEX_POINT('',#36064); +#36064 = CARTESIAN_POINT('',(9.,-2.81,0.)); +#36065 = LINE('',#36066,#36067); +#36066 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36067 = VECTOR('',#36068,1.); +#36068 = DIRECTION('',(0.,-1.,0.)); +#36069 = ORIENTED_EDGE('',*,*,#36070,.F.); +#36070 = EDGE_CURVE('',#36071,#36063,#36073,.T.); +#36071 = VERTEX_POINT('',#36072); +#36072 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#36073 = LINE('',#36074,#36075); +#36074 = CARTESIAN_POINT('',(4.275,-2.81,0.)); +#36075 = VECTOR('',#36076,1.); +#36076 = DIRECTION('',(1.,0.,0.)); +#36077 = ORIENTED_EDGE('',*,*,#36078,.T.); +#36078 = EDGE_CURVE('',#36071,#36079,#36081,.T.); +#36079 = VERTEX_POINT('',#36080); +#36080 = CARTESIAN_POINT('',(8.15,-2.81,0.)); +#36081 = LINE('',#36082,#36083); +#36082 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#36083 = VECTOR('',#36084,1.); +#36084 = DIRECTION('',(-1.,-0.,-0.)); +#36085 = ORIENTED_EDGE('',*,*,#36086,.F.); +#36086 = EDGE_CURVE('',#36087,#36079,#36089,.T.); +#36087 = VERTEX_POINT('',#36088); +#36088 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#36089 = LINE('',#36090,#36091); +#36090 = CARTESIAN_POINT('',(8.15,3.49,0.)); +#36091 = VECTOR('',#36092,1.); +#36092 = DIRECTION('',(-0.,-1.,-0.)); +#36093 = ORIENTED_EDGE('',*,*,#36094,.F.); +#36094 = EDGE_CURVE('',#36095,#36087,#36097,.T.); +#36095 = VERTEX_POINT('',#36096); +#36096 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#36097 = LINE('',#36098,#36099); +#36098 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#36099 = VECTOR('',#36100,1.); +#36100 = DIRECTION('',(-1.,-0.,-0.)); +#36101 = ORIENTED_EDGE('',*,*,#36102,.F.); +#36102 = EDGE_CURVE('',#36103,#36095,#36105,.T.); +#36103 = VERTEX_POINT('',#36104); +#36104 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#36105 = LINE('',#36106,#36107); +#36106 = CARTESIAN_POINT('',(4.5,-1.91,0.)); +#36107 = VECTOR('',#36108,1.); +#36108 = DIRECTION('',(-1.,0.,0.)); +#36109 = ORIENTED_EDGE('',*,*,#36110,.F.); +#36110 = EDGE_CURVE('',#36111,#36103,#36113,.T.); +#36111 = VERTEX_POINT('',#36112); +#36112 = CARTESIAN_POINT('',(9.,-1.54,0.)); +#36113 = LINE('',#36114,#36115); +#36114 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36115 = VECTOR('',#36116,1.); +#36116 = DIRECTION('',(0.,-1.,0.)); +#36117 = ORIENTED_EDGE('',*,*,#36118,.F.); +#36118 = EDGE_CURVE('',#36119,#36111,#36121,.T.); +#36119 = VERTEX_POINT('',#36120); +#36120 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#36121 = LINE('',#36122,#36123); +#36122 = CARTESIAN_POINT('',(4.275,-1.54,0.)); +#36123 = VECTOR('',#36124,1.); +#36124 = DIRECTION('',(1.,0.,0.)); +#36125 = ORIENTED_EDGE('',*,*,#36126,.T.); +#36126 = EDGE_CURVE('',#36119,#36127,#36129,.T.); +#36127 = VERTEX_POINT('',#36128); +#36128 = CARTESIAN_POINT('',(8.15,-1.54,0.)); +#36129 = LINE('',#36130,#36131); +#36130 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#36131 = VECTOR('',#36132,1.); +#36132 = DIRECTION('',(-1.,-0.,-0.)); +#36133 = ORIENTED_EDGE('',*,*,#36134,.F.); +#36134 = EDGE_CURVE('',#36135,#36127,#36137,.T.); +#36135 = VERTEX_POINT('',#36136); +#36136 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#36137 = LINE('',#36138,#36139); +#36138 = CARTESIAN_POINT('',(8.15,4.76,0.)); +#36139 = VECTOR('',#36140,1.); +#36140 = DIRECTION('',(-0.,-1.,-0.)); +#36141 = ORIENTED_EDGE('',*,*,#36142,.F.); +#36142 = EDGE_CURVE('',#36143,#36135,#36145,.T.); +#36143 = VERTEX_POINT('',#36144); +#36144 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#36145 = LINE('',#36146,#36147); +#36146 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#36147 = VECTOR('',#36148,1.); +#36148 = DIRECTION('',(-1.,-0.,-0.)); +#36149 = ORIENTED_EDGE('',*,*,#36150,.F.); +#36150 = EDGE_CURVE('',#36151,#36143,#36153,.T.); +#36151 = VERTEX_POINT('',#36152); +#36152 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#36153 = LINE('',#36154,#36155); +#36154 = CARTESIAN_POINT('',(4.5,-0.64,0.)); +#36155 = VECTOR('',#36156,1.); +#36156 = DIRECTION('',(-1.,0.,0.)); +#36157 = ORIENTED_EDGE('',*,*,#36158,.F.); +#36158 = EDGE_CURVE('',#36159,#36151,#36161,.T.); +#36159 = VERTEX_POINT('',#36160); +#36160 = CARTESIAN_POINT('',(9.,-0.27,0.)); +#36161 = LINE('',#36162,#36163); +#36162 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36163 = VECTOR('',#36164,1.); +#36164 = DIRECTION('',(0.,-1.,0.)); +#36165 = ORIENTED_EDGE('',*,*,#36166,.F.); +#36166 = EDGE_CURVE('',#36167,#36159,#36169,.T.); +#36167 = VERTEX_POINT('',#36168); +#36168 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#36169 = LINE('',#36170,#36171); +#36170 = CARTESIAN_POINT('',(4.275,-0.27,0.)); +#36171 = VECTOR('',#36172,1.); +#36172 = DIRECTION('',(1.,0.,0.)); +#36173 = ORIENTED_EDGE('',*,*,#36174,.T.); +#36174 = EDGE_CURVE('',#36167,#36175,#36177,.T.); +#36175 = VERTEX_POINT('',#36176); +#36176 = CARTESIAN_POINT('',(8.15,-0.27,0.)); +#36177 = LINE('',#36178,#36179); +#36178 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#36179 = VECTOR('',#36180,1.); +#36180 = DIRECTION('',(-1.,-0.,-0.)); +#36181 = ORIENTED_EDGE('',*,*,#36182,.F.); +#36182 = EDGE_CURVE('',#36183,#36175,#36185,.T.); +#36183 = VERTEX_POINT('',#36184); +#36184 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#36185 = LINE('',#36186,#36187); +#36186 = CARTESIAN_POINT('',(8.15,6.03,0.)); +#36187 = VECTOR('',#36188,1.); +#36188 = DIRECTION('',(-0.,-1.,-0.)); +#36189 = ORIENTED_EDGE('',*,*,#36190,.F.); +#36190 = EDGE_CURVE('',#36191,#36183,#36193,.T.); +#36191 = VERTEX_POINT('',#36192); +#36192 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#36193 = LINE('',#36194,#36195); +#36194 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#36195 = VECTOR('',#36196,1.); +#36196 = DIRECTION('',(-1.,-0.,-0.)); +#36197 = ORIENTED_EDGE('',*,*,#36198,.F.); +#36198 = EDGE_CURVE('',#36199,#36191,#36201,.T.); +#36199 = VERTEX_POINT('',#36200); +#36200 = CARTESIAN_POINT('',(9.,0.63,0.)); +#36201 = LINE('',#36202,#36203); +#36202 = CARTESIAN_POINT('',(4.5,0.63,0.)); +#36203 = VECTOR('',#36204,1.); +#36204 = DIRECTION('',(-1.,0.,0.)); +#36205 = ORIENTED_EDGE('',*,*,#36206,.F.); +#36206 = EDGE_CURVE('',#36207,#36199,#36209,.T.); +#36207 = VERTEX_POINT('',#36208); +#36208 = CARTESIAN_POINT('',(9.,1.,0.)); +#36209 = LINE('',#36210,#36211); +#36210 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36211 = VECTOR('',#36212,1.); +#36212 = DIRECTION('',(0.,-1.,0.)); +#36213 = ORIENTED_EDGE('',*,*,#36214,.F.); +#36214 = EDGE_CURVE('',#36215,#36207,#36217,.T.); +#36215 = VERTEX_POINT('',#36216); +#36216 = CARTESIAN_POINT('',(8.55,1.,0.)); +#36217 = LINE('',#36218,#36219); +#36218 = CARTESIAN_POINT('',(4.275,1.,0.)); +#36219 = VECTOR('',#36220,1.); +#36220 = DIRECTION('',(1.,0.,0.)); +#36221 = ORIENTED_EDGE('',*,*,#36222,.T.); +#36222 = EDGE_CURVE('',#36215,#36223,#36225,.T.); +#36223 = VERTEX_POINT('',#36224); +#36224 = CARTESIAN_POINT('',(8.15,1.,0.)); +#36225 = LINE('',#36226,#36227); +#36226 = CARTESIAN_POINT('',(8.55,1.,0.)); +#36227 = VECTOR('',#36228,1.); +#36228 = DIRECTION('',(-1.,-0.,-0.)); +#36229 = ORIENTED_EDGE('',*,*,#36230,.F.); +#36230 = EDGE_CURVE('',#36231,#36223,#36233,.T.); +#36231 = VERTEX_POINT('',#36232); +#36232 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#36233 = LINE('',#36234,#36235); +#36234 = CARTESIAN_POINT('',(8.15,7.3,0.)); +#36235 = VECTOR('',#36236,1.); +#36236 = DIRECTION('',(-0.,-1.,-0.)); +#36237 = ORIENTED_EDGE('',*,*,#36238,.F.); +#36238 = EDGE_CURVE('',#36239,#36231,#36241,.T.); +#36239 = VERTEX_POINT('',#36240); +#36240 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#36241 = LINE('',#36242,#36243); +#36242 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#36243 = VECTOR('',#36244,1.); +#36244 = DIRECTION('',(-1.,-0.,-0.)); +#36245 = ORIENTED_EDGE('',*,*,#36246,.F.); +#36246 = EDGE_CURVE('',#36247,#36239,#36249,.T.); +#36247 = VERTEX_POINT('',#36248); +#36248 = CARTESIAN_POINT('',(9.,1.9,0.)); +#36249 = LINE('',#36250,#36251); +#36250 = CARTESIAN_POINT('',(4.5,1.9,0.)); +#36251 = VECTOR('',#36252,1.); +#36252 = DIRECTION('',(-1.,0.,0.)); +#36253 = ORIENTED_EDGE('',*,*,#36254,.F.); +#36254 = EDGE_CURVE('',#36255,#36247,#36257,.T.); +#36255 = VERTEX_POINT('',#36256); +#36256 = CARTESIAN_POINT('',(9.,2.27,0.)); +#36257 = LINE('',#36258,#36259); +#36258 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36259 = VECTOR('',#36260,1.); +#36260 = DIRECTION('',(0.,-1.,0.)); +#36261 = ORIENTED_EDGE('',*,*,#36262,.F.); +#36262 = EDGE_CURVE('',#36263,#36255,#36265,.T.); +#36263 = VERTEX_POINT('',#36264); +#36264 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#36265 = LINE('',#36266,#36267); +#36266 = CARTESIAN_POINT('',(4.275,2.27,0.)); +#36267 = VECTOR('',#36268,1.); +#36268 = DIRECTION('',(1.,0.,0.)); +#36269 = ORIENTED_EDGE('',*,*,#36270,.T.); +#36270 = EDGE_CURVE('',#36263,#36271,#36273,.T.); +#36271 = VERTEX_POINT('',#36272); +#36272 = CARTESIAN_POINT('',(8.15,2.27,0.)); +#36273 = LINE('',#36274,#36275); +#36274 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#36275 = VECTOR('',#36276,1.); +#36276 = DIRECTION('',(-1.,-0.,-0.)); +#36277 = ORIENTED_EDGE('',*,*,#36278,.F.); +#36278 = EDGE_CURVE('',#36279,#36271,#36281,.T.); +#36279 = VERTEX_POINT('',#36280); +#36280 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#36281 = LINE('',#36282,#36283); +#36282 = CARTESIAN_POINT('',(8.15,8.57,0.)); +#36283 = VECTOR('',#36284,1.); +#36284 = DIRECTION('',(-0.,-1.,-0.)); +#36285 = ORIENTED_EDGE('',*,*,#36286,.F.); +#36286 = EDGE_CURVE('',#36287,#36279,#36289,.T.); +#36287 = VERTEX_POINT('',#36288); +#36288 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#36289 = LINE('',#36290,#36291); +#36290 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#36291 = VECTOR('',#36292,1.); +#36292 = DIRECTION('',(-1.,-0.,-0.)); +#36293 = ORIENTED_EDGE('',*,*,#36294,.F.); +#36294 = EDGE_CURVE('',#36295,#36287,#36297,.T.); +#36295 = VERTEX_POINT('',#36296); +#36296 = CARTESIAN_POINT('',(9.,3.17,0.)); +#36297 = LINE('',#36298,#36299); +#36298 = CARTESIAN_POINT('',(4.5,3.17,0.)); +#36299 = VECTOR('',#36300,1.); +#36300 = DIRECTION('',(-1.,0.,0.)); +#36301 = ORIENTED_EDGE('',*,*,#36302,.F.); +#36302 = EDGE_CURVE('',#36303,#36295,#36305,.T.); +#36303 = VERTEX_POINT('',#36304); +#36304 = CARTESIAN_POINT('',(9.,3.54,0.)); +#36305 = LINE('',#36306,#36307); +#36306 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36307 = VECTOR('',#36308,1.); +#36308 = DIRECTION('',(0.,-1.,0.)); +#36309 = ORIENTED_EDGE('',*,*,#36310,.F.); +#36310 = EDGE_CURVE('',#36311,#36303,#36313,.T.); +#36311 = VERTEX_POINT('',#36312); +#36312 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#36313 = LINE('',#36314,#36315); +#36314 = CARTESIAN_POINT('',(4.275,3.54,0.)); +#36315 = VECTOR('',#36316,1.); +#36316 = DIRECTION('',(1.,0.,0.)); +#36317 = ORIENTED_EDGE('',*,*,#36318,.T.); +#36318 = EDGE_CURVE('',#36311,#36319,#36321,.T.); +#36319 = VERTEX_POINT('',#36320); +#36320 = CARTESIAN_POINT('',(8.15,3.54,0.)); +#36321 = LINE('',#36322,#36323); +#36322 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#36323 = VECTOR('',#36324,1.); +#36324 = DIRECTION('',(-1.,-0.,-0.)); +#36325 = ORIENTED_EDGE('',*,*,#36326,.F.); +#36326 = EDGE_CURVE('',#36327,#36319,#36329,.T.); +#36327 = VERTEX_POINT('',#36328); +#36328 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#36329 = LINE('',#36330,#36331); +#36330 = CARTESIAN_POINT('',(8.15,9.84,0.)); +#36331 = VECTOR('',#36332,1.); +#36332 = DIRECTION('',(-0.,-1.,-0.)); +#36333 = ORIENTED_EDGE('',*,*,#36334,.F.); +#36334 = EDGE_CURVE('',#36335,#36327,#36337,.T.); +#36335 = VERTEX_POINT('',#36336); +#36336 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#36337 = LINE('',#36338,#36339); +#36338 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#36339 = VECTOR('',#36340,1.); +#36340 = DIRECTION('',(-1.,-0.,-0.)); +#36341 = ORIENTED_EDGE('',*,*,#36342,.F.); +#36342 = EDGE_CURVE('',#36343,#36335,#36345,.T.); +#36343 = VERTEX_POINT('',#36344); +#36344 = CARTESIAN_POINT('',(9.,4.44,0.)); +#36345 = LINE('',#36346,#36347); +#36346 = CARTESIAN_POINT('',(4.5,4.44,0.)); +#36347 = VECTOR('',#36348,1.); +#36348 = DIRECTION('',(-1.,0.,0.)); +#36349 = ORIENTED_EDGE('',*,*,#36350,.F.); +#36350 = EDGE_CURVE('',#36351,#36343,#36353,.T.); +#36351 = VERTEX_POINT('',#36352); +#36352 = CARTESIAN_POINT('',(9.,4.81,0.)); +#36353 = LINE('',#36354,#36355); +#36354 = CARTESIAN_POINT('',(9.,12.75,0.)); +#36355 = VECTOR('',#36356,1.); +#36356 = DIRECTION('',(0.,-1.,0.)); +#36357 = ORIENTED_EDGE('',*,*,#36358,.F.); +#36358 = EDGE_CURVE('',#36359,#36351,#36361,.T.); +#36359 = VERTEX_POINT('',#36360); +#36360 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#36361 = LINE('',#36362,#36363); +#36362 = CARTESIAN_POINT('',(4.275,4.81,0.)); +#36363 = VECTOR('',#36364,1.); +#36364 = DIRECTION('',(1.,0.,0.)); +#36365 = ORIENTED_EDGE('',*,*,#36366,.T.); +#36366 = EDGE_CURVE('',#36359,#36367,#36369,.T.); +#36367 = VERTEX_POINT('',#36368); +#36368 = CARTESIAN_POINT('',(8.15,4.81,0.)); +#36369 = LINE('',#36370,#36371); +#36370 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#36371 = VECTOR('',#36372,1.); +#36372 = DIRECTION('',(-1.,-0.,-0.)); +#36373 = ORIENTED_EDGE('',*,*,#36374,.F.); +#36374 = EDGE_CURVE('',#36375,#36367,#36377,.T.); +#36375 = VERTEX_POINT('',#36376); +#36376 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#36377 = LINE('',#36378,#36379); +#36378 = CARTESIAN_POINT('',(8.15,11.11,0.)); +#36379 = VECTOR('',#36380,1.); +#36380 = DIRECTION('',(-0.,-1.,-0.)); +#36381 = ORIENTED_EDGE('',*,*,#36382,.F.); +#36382 = EDGE_CURVE('',#36383,#36375,#36385,.T.); +#36383 = VERTEX_POINT('',#36384); +#36384 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#36385 = LINE('',#36386,#36387); +#36386 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#36387 = VECTOR('',#36388,1.); +#36388 = DIRECTION('',(-1.,-0.,-0.)); +#36389 = ORIENTED_EDGE('',*,*,#36390,.F.); +#36390 = EDGE_CURVE('',#34430,#36383,#36391,.T.); +#36391 = LINE('',#36392,#36393); +#36392 = CARTESIAN_POINT('',(4.5,5.71,0.)); +#36393 = VECTOR('',#36394,1.); +#36394 = DIRECTION('',(-1.,0.,0.)); +#36395 = ORIENTED_EDGE('',*,*,#34429,.F.); +#36396 = FACE_BOUND('',#36397,.F.); +#36397 = EDGE_LOOP('',(#36398,#36408,#36416,#36424)); +#36398 = ORIENTED_EDGE('',*,*,#36399,.F.); +#36399 = EDGE_CURVE('',#36400,#36402,#36404,.T.); +#36400 = VERTEX_POINT('',#36401); +#36401 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#36402 = VERTEX_POINT('',#36403); +#36403 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#36404 = LINE('',#36405,#36406); +#36405 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#36406 = VECTOR('',#36407,1.); +#36407 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36408 = ORIENTED_EDGE('',*,*,#36409,.F.); +#36409 = EDGE_CURVE('',#36410,#36400,#36412,.T.); +#36410 = VERTEX_POINT('',#36411); +#36411 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#36412 = LINE('',#36413,#36414); +#36413 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#36414 = VECTOR('',#36415,1.); +#36415 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36416 = ORIENTED_EDGE('',*,*,#36417,.F.); +#36417 = EDGE_CURVE('',#36418,#36410,#36420,.T.); +#36418 = VERTEX_POINT('',#36419); +#36419 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#36420 = LINE('',#36421,#36422); +#36421 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#36422 = VECTOR('',#36423,1.); +#36423 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36424 = ORIENTED_EDGE('',*,*,#36425,.F.); +#36425 = EDGE_CURVE('',#36402,#36418,#36426,.T.); +#36426 = LINE('',#36427,#36428); +#36427 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#36428 = VECTOR('',#36429,1.); +#36429 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36430 = FACE_BOUND('',#36431,.F.); +#36431 = EDGE_LOOP('',(#36432,#36442,#36450,#36458)); +#36432 = ORIENTED_EDGE('',*,*,#36433,.F.); +#36433 = EDGE_CURVE('',#36434,#36436,#36438,.T.); +#36434 = VERTEX_POINT('',#36435); +#36435 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#36436 = VERTEX_POINT('',#36437); +#36437 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#36438 = LINE('',#36439,#36440); +#36439 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#36440 = VECTOR('',#36441,1.); +#36441 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36442 = ORIENTED_EDGE('',*,*,#36443,.F.); +#36443 = EDGE_CURVE('',#36444,#36434,#36446,.T.); +#36444 = VERTEX_POINT('',#36445); +#36445 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#36446 = LINE('',#36447,#36448); +#36447 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#36448 = VECTOR('',#36449,1.); +#36449 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36450 = ORIENTED_EDGE('',*,*,#36451,.F.); +#36451 = EDGE_CURVE('',#36452,#36444,#36454,.T.); +#36452 = VERTEX_POINT('',#36453); +#36453 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#36454 = LINE('',#36455,#36456); +#36455 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#36456 = VECTOR('',#36457,1.); +#36457 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36458 = ORIENTED_EDGE('',*,*,#36459,.F.); +#36459 = EDGE_CURVE('',#36436,#36452,#36460,.T.); +#36460 = LINE('',#36461,#36462); +#36461 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#36462 = VECTOR('',#36463,1.); +#36463 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36464 = FACE_BOUND('',#36465,.F.); +#36465 = EDGE_LOOP('',(#36466,#36476,#36484,#36492)); +#36466 = ORIENTED_EDGE('',*,*,#36467,.F.); +#36467 = EDGE_CURVE('',#36468,#36470,#36472,.T.); +#36468 = VERTEX_POINT('',#36469); +#36469 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#36470 = VERTEX_POINT('',#36471); +#36471 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#36472 = LINE('',#36473,#36474); +#36473 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#36474 = VECTOR('',#36475,1.); +#36475 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36476 = ORIENTED_EDGE('',*,*,#36477,.F.); +#36477 = EDGE_CURVE('',#36478,#36468,#36480,.T.); +#36478 = VERTEX_POINT('',#36479); +#36479 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#36480 = LINE('',#36481,#36482); +#36481 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#36482 = VECTOR('',#36483,1.); +#36483 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36484 = ORIENTED_EDGE('',*,*,#36485,.F.); +#36485 = EDGE_CURVE('',#36486,#36478,#36488,.T.); +#36486 = VERTEX_POINT('',#36487); +#36487 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#36488 = LINE('',#36489,#36490); +#36489 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#36490 = VECTOR('',#36491,1.); +#36491 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36492 = ORIENTED_EDGE('',*,*,#36493,.F.); +#36493 = EDGE_CURVE('',#36470,#36486,#36494,.T.); +#36494 = LINE('',#36495,#36496); +#36495 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#36496 = VECTOR('',#36497,1.); +#36497 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36498 = FACE_BOUND('',#36499,.F.); +#36499 = EDGE_LOOP('',(#36500,#36510,#36518,#36526)); +#36500 = ORIENTED_EDGE('',*,*,#36501,.T.); +#36501 = EDGE_CURVE('',#36502,#36504,#36506,.T.); +#36502 = VERTEX_POINT('',#36503); +#36503 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#36504 = VERTEX_POINT('',#36505); +#36505 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#36506 = LINE('',#36507,#36508); +#36507 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#36508 = VECTOR('',#36509,1.); +#36509 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36510 = ORIENTED_EDGE('',*,*,#36511,.T.); +#36511 = EDGE_CURVE('',#36504,#36512,#36514,.T.); +#36512 = VERTEX_POINT('',#36513); +#36513 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#36514 = LINE('',#36515,#36516); +#36515 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#36516 = VECTOR('',#36517,1.); +#36517 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36518 = ORIENTED_EDGE('',*,*,#36519,.T.); +#36519 = EDGE_CURVE('',#36512,#36520,#36522,.T.); +#36520 = VERTEX_POINT('',#36521); +#36521 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#36522 = LINE('',#36523,#36524); +#36523 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#36524 = VECTOR('',#36525,1.); +#36525 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36526 = ORIENTED_EDGE('',*,*,#36527,.T.); +#36527 = EDGE_CURVE('',#36520,#36502,#36528,.T.); +#36528 = LINE('',#36529,#36530); +#36529 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#36530 = VECTOR('',#36531,1.); +#36531 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36532 = FACE_BOUND('',#36533,.F.); +#36533 = EDGE_LOOP('',(#36534,#36544,#36552,#36560)); +#36534 = ORIENTED_EDGE('',*,*,#36535,.T.); +#36535 = EDGE_CURVE('',#36536,#36538,#36540,.T.); +#36536 = VERTEX_POINT('',#36537); +#36537 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#36538 = VERTEX_POINT('',#36539); +#36539 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#36540 = LINE('',#36541,#36542); +#36541 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#36542 = VECTOR('',#36543,1.); +#36543 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36544 = ORIENTED_EDGE('',*,*,#36545,.T.); +#36545 = EDGE_CURVE('',#36538,#36546,#36548,.T.); +#36546 = VERTEX_POINT('',#36547); +#36547 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#36548 = LINE('',#36549,#36550); +#36549 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#36550 = VECTOR('',#36551,1.); +#36551 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36552 = ORIENTED_EDGE('',*,*,#36553,.T.); +#36553 = EDGE_CURVE('',#36546,#36554,#36556,.T.); +#36554 = VERTEX_POINT('',#36555); +#36555 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#36556 = LINE('',#36557,#36558); +#36557 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#36558 = VECTOR('',#36559,1.); +#36559 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36560 = ORIENTED_EDGE('',*,*,#36561,.T.); +#36561 = EDGE_CURVE('',#36554,#36536,#36562,.T.); +#36562 = LINE('',#36563,#36564); +#36563 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#36564 = VECTOR('',#36565,1.); +#36565 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36566 = FACE_BOUND('',#36567,.F.); +#36567 = EDGE_LOOP('',(#36568,#36578,#36586,#36594)); +#36568 = ORIENTED_EDGE('',*,*,#36569,.F.); +#36569 = EDGE_CURVE('',#36570,#36572,#36574,.T.); +#36570 = VERTEX_POINT('',#36571); +#36571 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#36572 = VERTEX_POINT('',#36573); +#36573 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#36574 = LINE('',#36575,#36576); +#36575 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#36576 = VECTOR('',#36577,1.); +#36577 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36578 = ORIENTED_EDGE('',*,*,#36579,.F.); +#36579 = EDGE_CURVE('',#36580,#36570,#36582,.T.); +#36580 = VERTEX_POINT('',#36581); +#36581 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#36582 = LINE('',#36583,#36584); +#36583 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#36584 = VECTOR('',#36585,1.); +#36585 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36586 = ORIENTED_EDGE('',*,*,#36587,.F.); +#36587 = EDGE_CURVE('',#36588,#36580,#36590,.T.); +#36588 = VERTEX_POINT('',#36589); +#36589 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#36590 = LINE('',#36591,#36592); +#36591 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#36592 = VECTOR('',#36593,1.); +#36593 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36594 = ORIENTED_EDGE('',*,*,#36595,.F.); +#36595 = EDGE_CURVE('',#36572,#36588,#36596,.T.); +#36596 = LINE('',#36597,#36598); +#36597 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#36598 = VECTOR('',#36599,1.); +#36599 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36600 = FACE_BOUND('',#36601,.F.); +#36601 = EDGE_LOOP('',(#36602,#36612,#36620,#36628)); +#36602 = ORIENTED_EDGE('',*,*,#36603,.F.); +#36603 = EDGE_CURVE('',#36604,#36606,#36608,.T.); +#36604 = VERTEX_POINT('',#36605); +#36605 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#36606 = VERTEX_POINT('',#36607); +#36607 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#36608 = LINE('',#36609,#36610); +#36609 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#36610 = VECTOR('',#36611,1.); +#36611 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36612 = ORIENTED_EDGE('',*,*,#36613,.F.); +#36613 = EDGE_CURVE('',#36614,#36604,#36616,.T.); +#36614 = VERTEX_POINT('',#36615); +#36615 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#36616 = LINE('',#36617,#36618); +#36617 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#36618 = VECTOR('',#36619,1.); +#36619 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36620 = ORIENTED_EDGE('',*,*,#36621,.F.); +#36621 = EDGE_CURVE('',#36622,#36614,#36624,.T.); +#36622 = VERTEX_POINT('',#36623); +#36623 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#36624 = LINE('',#36625,#36626); +#36625 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#36626 = VECTOR('',#36627,1.); +#36627 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36628 = ORIENTED_EDGE('',*,*,#36629,.F.); +#36629 = EDGE_CURVE('',#36606,#36622,#36630,.T.); +#36630 = LINE('',#36631,#36632); +#36631 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#36632 = VECTOR('',#36633,1.); +#36633 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36634 = FACE_BOUND('',#36635,.F.); +#36635 = EDGE_LOOP('',(#36636,#36646,#36654,#36662)); +#36636 = ORIENTED_EDGE('',*,*,#36637,.F.); +#36637 = EDGE_CURVE('',#36638,#36640,#36642,.T.); +#36638 = VERTEX_POINT('',#36639); +#36639 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#36640 = VERTEX_POINT('',#36641); +#36641 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#36642 = LINE('',#36643,#36644); +#36643 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#36644 = VECTOR('',#36645,1.); +#36645 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36646 = ORIENTED_EDGE('',*,*,#36647,.F.); +#36647 = EDGE_CURVE('',#36648,#36638,#36650,.T.); +#36648 = VERTEX_POINT('',#36649); +#36649 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#36650 = LINE('',#36651,#36652); +#36651 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#36652 = VECTOR('',#36653,1.); +#36653 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36654 = ORIENTED_EDGE('',*,*,#36655,.F.); +#36655 = EDGE_CURVE('',#36656,#36648,#36658,.T.); +#36656 = VERTEX_POINT('',#36657); +#36657 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#36658 = LINE('',#36659,#36660); +#36659 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#36660 = VECTOR('',#36661,1.); +#36661 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36662 = ORIENTED_EDGE('',*,*,#36663,.F.); +#36663 = EDGE_CURVE('',#36640,#36656,#36664,.T.); +#36664 = LINE('',#36665,#36666); +#36665 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#36666 = VECTOR('',#36667,1.); +#36667 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36668 = FACE_BOUND('',#36669,.F.); +#36669 = EDGE_LOOP('',(#36670,#36680,#36688,#36696)); +#36670 = ORIENTED_EDGE('',*,*,#36671,.F.); +#36671 = EDGE_CURVE('',#36672,#36674,#36676,.T.); +#36672 = VERTEX_POINT('',#36673); +#36673 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#36674 = VERTEX_POINT('',#36675); +#36675 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#36676 = LINE('',#36677,#36678); +#36677 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#36678 = VECTOR('',#36679,1.); +#36679 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#36680 = ORIENTED_EDGE('',*,*,#36681,.F.); +#36681 = EDGE_CURVE('',#36682,#36672,#36684,.T.); +#36682 = VERTEX_POINT('',#36683); +#36683 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#36684 = LINE('',#36685,#36686); +#36685 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#36686 = VECTOR('',#36687,1.); +#36687 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#36688 = ORIENTED_EDGE('',*,*,#36689,.F.); +#36689 = EDGE_CURVE('',#36690,#36682,#36692,.T.); +#36690 = VERTEX_POINT('',#36691); +#36691 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#36692 = LINE('',#36693,#36694); +#36693 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#36694 = VECTOR('',#36695,1.); +#36695 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#36696 = ORIENTED_EDGE('',*,*,#36697,.F.); +#36697 = EDGE_CURVE('',#36674,#36690,#36698,.T.); +#36698 = LINE('',#36699,#36700); +#36699 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#36700 = VECTOR('',#36701,1.); +#36701 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#36702 = PLANE('',#36703); +#36703 = AXIS2_PLACEMENT_3D('',#36704,#36705,#36706); +#36704 = CARTESIAN_POINT('',(0.,0.,0.)); +#36705 = DIRECTION('',(0.,0.,1.)); +#36706 = DIRECTION('',(1.,0.,-0.)); +#36707 = ADVANCED_FACE('',(#36708),#37999,.T.); +#36708 = FACE_BOUND('',#36709,.T.); +#36709 = EDGE_LOOP('',(#36710,#36711,#36712,#36720,#36728,#36736,#36744, + #36752,#36760,#36768,#36776,#36784,#36792,#36800,#36808,#36816, + #36824,#36832,#36840,#36848,#36856,#36864,#36872,#36880,#36888, + #36896,#36904,#36912,#36920,#36928,#36936,#36944,#36952,#36960, + #36968,#36976,#36984,#36992,#37000,#37008,#37016,#37024,#37032, + #37040,#37048,#37056,#37064,#37072,#37080,#37088,#37096,#37104, + #37112,#37120,#37128,#37136,#37144,#37152,#37160,#37168,#37176, + #37184,#37192,#37200,#37208,#37216,#37224,#37232,#37240,#37248, + #37256,#37264,#37272,#37280,#37288,#37296,#37304,#37312,#37320, + #37328,#37336,#37344,#37352,#37360,#37368,#37376,#37384,#37392, + #37400,#37408,#37416,#37424,#37432,#37440,#37448,#37456,#37464, + #37472,#37480,#37488,#37496,#37504,#37512,#37520,#37528,#37536, + #37544,#37552,#37560,#37568,#37576,#37584,#37592,#37600,#37608, + #37616,#37624,#37632,#37640,#37648,#37656,#37664,#37672,#37680, + #37688,#37696,#37704,#37712,#37720,#37728,#37736,#37744,#37752, + #37760,#37768,#37776,#37784,#37792,#37800,#37808,#37816,#37824, + #37832,#37840,#37848,#37856,#37864,#37872,#37880,#37888,#37896, + #37904,#37912,#37920,#37928,#37936,#37944,#37952,#37960,#37968, + #37976,#37984,#37992,#37998)); +#36710 = ORIENTED_EDGE('',*,*,#34360,.F.); +#36711 = ORIENTED_EDGE('',*,*,#34414,.F.); +#36712 = ORIENTED_EDGE('',*,*,#36713,.T.); +#36713 = EDGE_CURVE('',#34407,#36714,#36716,.T.); +#36714 = VERTEX_POINT('',#36715); +#36715 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#36716 = LINE('',#36717,#36718); +#36717 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#36718 = VECTOR('',#36719,1.); +#36719 = DIRECTION('',(1.,0.,0.)); +#36720 = ORIENTED_EDGE('',*,*,#36721,.T.); +#36721 = EDGE_CURVE('',#36714,#36722,#36724,.T.); +#36722 = VERTEX_POINT('',#36723); +#36723 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#36724 = LINE('',#36725,#36726); +#36725 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#36726 = VECTOR('',#36727,1.); +#36727 = DIRECTION('',(0.,-1.,0.)); +#36728 = ORIENTED_EDGE('',*,*,#36729,.T.); +#36729 = EDGE_CURVE('',#36722,#36730,#36732,.T.); +#36730 = VERTEX_POINT('',#36731); +#36731 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#36732 = LINE('',#36733,#36734); +#36733 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#36734 = VECTOR('',#36735,1.); +#36735 = DIRECTION('',(-1.,0.,0.)); +#36736 = ORIENTED_EDGE('',*,*,#36737,.F.); +#36737 = EDGE_CURVE('',#36738,#36730,#36740,.T.); +#36738 = VERTEX_POINT('',#36739); +#36739 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#36740 = LINE('',#36741,#36742); +#36741 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36742 = VECTOR('',#36743,1.); +#36743 = DIRECTION('',(0.,1.,0.)); +#36744 = ORIENTED_EDGE('',*,*,#36745,.T.); +#36745 = EDGE_CURVE('',#36738,#36746,#36748,.T.); +#36746 = VERTEX_POINT('',#36747); +#36747 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#36748 = LINE('',#36749,#36750); +#36749 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#36750 = VECTOR('',#36751,1.); +#36751 = DIRECTION('',(1.,0.,0.)); +#36752 = ORIENTED_EDGE('',*,*,#36753,.T.); +#36753 = EDGE_CURVE('',#36746,#36754,#36756,.T.); +#36754 = VERTEX_POINT('',#36755); +#36755 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#36756 = LINE('',#36757,#36758); +#36757 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#36758 = VECTOR('',#36759,1.); +#36759 = DIRECTION('',(0.,-1.,0.)); +#36760 = ORIENTED_EDGE('',*,*,#36761,.T.); +#36761 = EDGE_CURVE('',#36754,#36762,#36764,.T.); +#36762 = VERTEX_POINT('',#36763); +#36763 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#36764 = LINE('',#36765,#36766); +#36765 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#36766 = VECTOR('',#36767,1.); +#36767 = DIRECTION('',(-1.,0.,0.)); +#36768 = ORIENTED_EDGE('',*,*,#36769,.F.); +#36769 = EDGE_CURVE('',#36770,#36762,#36772,.T.); +#36770 = VERTEX_POINT('',#36771); +#36771 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#36772 = LINE('',#36773,#36774); +#36773 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36774 = VECTOR('',#36775,1.); +#36775 = DIRECTION('',(0.,1.,0.)); +#36776 = ORIENTED_EDGE('',*,*,#36777,.T.); +#36777 = EDGE_CURVE('',#36770,#36778,#36780,.T.); +#36778 = VERTEX_POINT('',#36779); +#36779 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#36780 = LINE('',#36781,#36782); +#36781 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#36782 = VECTOR('',#36783,1.); +#36783 = DIRECTION('',(1.,0.,0.)); +#36784 = ORIENTED_EDGE('',*,*,#36785,.T.); +#36785 = EDGE_CURVE('',#36778,#36786,#36788,.T.); +#36786 = VERTEX_POINT('',#36787); +#36787 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#36788 = LINE('',#36789,#36790); +#36789 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#36790 = VECTOR('',#36791,1.); +#36791 = DIRECTION('',(0.,-1.,0.)); +#36792 = ORIENTED_EDGE('',*,*,#36793,.T.); +#36793 = EDGE_CURVE('',#36786,#36794,#36796,.T.); +#36794 = VERTEX_POINT('',#36795); +#36795 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#36796 = LINE('',#36797,#36798); +#36797 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#36798 = VECTOR('',#36799,1.); +#36799 = DIRECTION('',(-1.,0.,0.)); +#36800 = ORIENTED_EDGE('',*,*,#36801,.F.); +#36801 = EDGE_CURVE('',#36802,#36794,#36804,.T.); +#36802 = VERTEX_POINT('',#36803); +#36803 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#36804 = LINE('',#36805,#36806); +#36805 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36806 = VECTOR('',#36807,1.); +#36807 = DIRECTION('',(0.,1.,0.)); +#36808 = ORIENTED_EDGE('',*,*,#36809,.T.); +#36809 = EDGE_CURVE('',#36802,#36810,#36812,.T.); +#36810 = VERTEX_POINT('',#36811); +#36811 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#36812 = LINE('',#36813,#36814); +#36813 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#36814 = VECTOR('',#36815,1.); +#36815 = DIRECTION('',(1.,0.,0.)); +#36816 = ORIENTED_EDGE('',*,*,#36817,.T.); +#36817 = EDGE_CURVE('',#36810,#36818,#36820,.T.); +#36818 = VERTEX_POINT('',#36819); +#36819 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#36820 = LINE('',#36821,#36822); +#36821 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#36822 = VECTOR('',#36823,1.); +#36823 = DIRECTION('',(0.,-1.,0.)); +#36824 = ORIENTED_EDGE('',*,*,#36825,.T.); +#36825 = EDGE_CURVE('',#36818,#36826,#36828,.T.); +#36826 = VERTEX_POINT('',#36827); +#36827 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#36828 = LINE('',#36829,#36830); +#36829 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#36830 = VECTOR('',#36831,1.); +#36831 = DIRECTION('',(-1.,0.,0.)); +#36832 = ORIENTED_EDGE('',*,*,#36833,.F.); +#36833 = EDGE_CURVE('',#36834,#36826,#36836,.T.); +#36834 = VERTEX_POINT('',#36835); +#36835 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#36836 = LINE('',#36837,#36838); +#36837 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36838 = VECTOR('',#36839,1.); +#36839 = DIRECTION('',(0.,1.,0.)); +#36840 = ORIENTED_EDGE('',*,*,#36841,.T.); +#36841 = EDGE_CURVE('',#36834,#36842,#36844,.T.); +#36842 = VERTEX_POINT('',#36843); +#36843 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#36844 = LINE('',#36845,#36846); +#36845 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#36846 = VECTOR('',#36847,1.); +#36847 = DIRECTION('',(1.,0.,0.)); +#36848 = ORIENTED_EDGE('',*,*,#36849,.T.); +#36849 = EDGE_CURVE('',#36842,#36850,#36852,.T.); +#36850 = VERTEX_POINT('',#36851); +#36851 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#36852 = LINE('',#36853,#36854); +#36853 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#36854 = VECTOR('',#36855,1.); +#36855 = DIRECTION('',(0.,-1.,0.)); +#36856 = ORIENTED_EDGE('',*,*,#36857,.T.); +#36857 = EDGE_CURVE('',#36850,#36858,#36860,.T.); +#36858 = VERTEX_POINT('',#36859); +#36859 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#36860 = LINE('',#36861,#36862); +#36861 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#36862 = VECTOR('',#36863,1.); +#36863 = DIRECTION('',(-1.,0.,0.)); +#36864 = ORIENTED_EDGE('',*,*,#36865,.F.); +#36865 = EDGE_CURVE('',#36866,#36858,#36868,.T.); +#36866 = VERTEX_POINT('',#36867); +#36867 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#36868 = LINE('',#36869,#36870); +#36869 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36870 = VECTOR('',#36871,1.); +#36871 = DIRECTION('',(0.,1.,0.)); +#36872 = ORIENTED_EDGE('',*,*,#36873,.T.); +#36873 = EDGE_CURVE('',#36866,#36874,#36876,.T.); +#36874 = VERTEX_POINT('',#36875); +#36875 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#36876 = LINE('',#36877,#36878); +#36877 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#36878 = VECTOR('',#36879,1.); +#36879 = DIRECTION('',(1.,0.,0.)); +#36880 = ORIENTED_EDGE('',*,*,#36881,.T.); +#36881 = EDGE_CURVE('',#36874,#36882,#36884,.T.); +#36882 = VERTEX_POINT('',#36883); +#36883 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#36884 = LINE('',#36885,#36886); +#36885 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#36886 = VECTOR('',#36887,1.); +#36887 = DIRECTION('',(0.,-1.,0.)); +#36888 = ORIENTED_EDGE('',*,*,#36889,.T.); +#36889 = EDGE_CURVE('',#36882,#36890,#36892,.T.); +#36890 = VERTEX_POINT('',#36891); +#36891 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#36892 = LINE('',#36893,#36894); +#36893 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#36894 = VECTOR('',#36895,1.); +#36895 = DIRECTION('',(-1.,0.,0.)); +#36896 = ORIENTED_EDGE('',*,*,#36897,.F.); +#36897 = EDGE_CURVE('',#36898,#36890,#36900,.T.); +#36898 = VERTEX_POINT('',#36899); +#36899 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#36900 = LINE('',#36901,#36902); +#36901 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36902 = VECTOR('',#36903,1.); +#36903 = DIRECTION('',(0.,1.,0.)); +#36904 = ORIENTED_EDGE('',*,*,#36905,.T.); +#36905 = EDGE_CURVE('',#36898,#36906,#36908,.T.); +#36906 = VERTEX_POINT('',#36907); +#36907 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#36908 = LINE('',#36909,#36910); +#36909 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#36910 = VECTOR('',#36911,1.); +#36911 = DIRECTION('',(1.,0.,0.)); +#36912 = ORIENTED_EDGE('',*,*,#36913,.T.); +#36913 = EDGE_CURVE('',#36906,#36914,#36916,.T.); +#36914 = VERTEX_POINT('',#36915); +#36915 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#36916 = LINE('',#36917,#36918); +#36917 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#36918 = VECTOR('',#36919,1.); +#36919 = DIRECTION('',(0.,-1.,0.)); +#36920 = ORIENTED_EDGE('',*,*,#36921,.T.); +#36921 = EDGE_CURVE('',#36914,#36922,#36924,.T.); +#36922 = VERTEX_POINT('',#36923); +#36923 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#36924 = LINE('',#36925,#36926); +#36925 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#36926 = VECTOR('',#36927,1.); +#36927 = DIRECTION('',(-1.,0.,0.)); +#36928 = ORIENTED_EDGE('',*,*,#36929,.F.); +#36929 = EDGE_CURVE('',#36930,#36922,#36932,.T.); +#36930 = VERTEX_POINT('',#36931); +#36931 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#36932 = LINE('',#36933,#36934); +#36933 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36934 = VECTOR('',#36935,1.); +#36935 = DIRECTION('',(0.,1.,0.)); +#36936 = ORIENTED_EDGE('',*,*,#36937,.T.); +#36937 = EDGE_CURVE('',#36930,#36938,#36940,.T.); +#36938 = VERTEX_POINT('',#36939); +#36939 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#36940 = LINE('',#36941,#36942); +#36941 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#36942 = VECTOR('',#36943,1.); +#36943 = DIRECTION('',(1.,0.,0.)); +#36944 = ORIENTED_EDGE('',*,*,#36945,.T.); +#36945 = EDGE_CURVE('',#36938,#36946,#36948,.T.); +#36946 = VERTEX_POINT('',#36947); +#36947 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#36948 = LINE('',#36949,#36950); +#36949 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#36950 = VECTOR('',#36951,1.); +#36951 = DIRECTION('',(0.,-1.,0.)); +#36952 = ORIENTED_EDGE('',*,*,#36953,.T.); +#36953 = EDGE_CURVE('',#36946,#36954,#36956,.T.); +#36954 = VERTEX_POINT('',#36955); +#36955 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#36956 = LINE('',#36957,#36958); +#36957 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#36958 = VECTOR('',#36959,1.); +#36959 = DIRECTION('',(-1.,0.,0.)); +#36960 = ORIENTED_EDGE('',*,*,#36961,.F.); +#36961 = EDGE_CURVE('',#36962,#36954,#36964,.T.); +#36962 = VERTEX_POINT('',#36963); +#36963 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#36964 = LINE('',#36965,#36966); +#36965 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36966 = VECTOR('',#36967,1.); +#36967 = DIRECTION('',(0.,1.,0.)); +#36968 = ORIENTED_EDGE('',*,*,#36969,.T.); +#36969 = EDGE_CURVE('',#36962,#36970,#36972,.T.); +#36970 = VERTEX_POINT('',#36971); +#36971 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#36972 = LINE('',#36973,#36974); +#36973 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#36974 = VECTOR('',#36975,1.); +#36975 = DIRECTION('',(1.,0.,0.)); +#36976 = ORIENTED_EDGE('',*,*,#36977,.T.); +#36977 = EDGE_CURVE('',#36970,#36978,#36980,.T.); +#36978 = VERTEX_POINT('',#36979); +#36979 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#36980 = LINE('',#36981,#36982); +#36981 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#36982 = VECTOR('',#36983,1.); +#36983 = DIRECTION('',(0.,-1.,0.)); +#36984 = ORIENTED_EDGE('',*,*,#36985,.T.); +#36985 = EDGE_CURVE('',#36978,#36986,#36988,.T.); +#36986 = VERTEX_POINT('',#36987); +#36987 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#36988 = LINE('',#36989,#36990); +#36989 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#36990 = VECTOR('',#36991,1.); +#36991 = DIRECTION('',(-1.,0.,0.)); +#36992 = ORIENTED_EDGE('',*,*,#36993,.F.); +#36993 = EDGE_CURVE('',#36994,#36986,#36996,.T.); +#36994 = VERTEX_POINT('',#36995); +#36995 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#36996 = LINE('',#36997,#36998); +#36997 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#36998 = VECTOR('',#36999,1.); +#36999 = DIRECTION('',(0.,1.,0.)); +#37000 = ORIENTED_EDGE('',*,*,#37001,.T.); +#37001 = EDGE_CURVE('',#36994,#37002,#37004,.T.); +#37002 = VERTEX_POINT('',#37003); +#37003 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#37004 = LINE('',#37005,#37006); +#37005 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#37006 = VECTOR('',#37007,1.); +#37007 = DIRECTION('',(1.,0.,0.)); +#37008 = ORIENTED_EDGE('',*,*,#37009,.T.); +#37009 = EDGE_CURVE('',#37002,#37010,#37012,.T.); +#37010 = VERTEX_POINT('',#37011); +#37011 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#37012 = LINE('',#37013,#37014); +#37013 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#37014 = VECTOR('',#37015,1.); +#37015 = DIRECTION('',(0.,-1.,0.)); +#37016 = ORIENTED_EDGE('',*,*,#37017,.T.); +#37017 = EDGE_CURVE('',#37010,#37018,#37020,.T.); +#37018 = VERTEX_POINT('',#37019); +#37019 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#37020 = LINE('',#37021,#37022); +#37021 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#37022 = VECTOR('',#37023,1.); +#37023 = DIRECTION('',(-1.,0.,0.)); +#37024 = ORIENTED_EDGE('',*,*,#37025,.F.); +#37025 = EDGE_CURVE('',#37026,#37018,#37028,.T.); +#37026 = VERTEX_POINT('',#37027); +#37027 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#37028 = LINE('',#37029,#37030); +#37029 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37030 = VECTOR('',#37031,1.); +#37031 = DIRECTION('',(0.,1.,0.)); +#37032 = ORIENTED_EDGE('',*,*,#37033,.T.); +#37033 = EDGE_CURVE('',#37026,#37034,#37036,.T.); +#37034 = VERTEX_POINT('',#37035); +#37035 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#37036 = LINE('',#37037,#37038); +#37037 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#37038 = VECTOR('',#37039,1.); +#37039 = DIRECTION('',(1.,0.,0.)); +#37040 = ORIENTED_EDGE('',*,*,#37041,.T.); +#37041 = EDGE_CURVE('',#37034,#37042,#37044,.T.); +#37042 = VERTEX_POINT('',#37043); +#37043 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#37044 = LINE('',#37045,#37046); +#37045 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#37046 = VECTOR('',#37047,1.); +#37047 = DIRECTION('',(0.,-1.,0.)); +#37048 = ORIENTED_EDGE('',*,*,#37049,.T.); +#37049 = EDGE_CURVE('',#37042,#37050,#37052,.T.); +#37050 = VERTEX_POINT('',#37051); +#37051 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#37052 = LINE('',#37053,#37054); +#37053 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#37054 = VECTOR('',#37055,1.); +#37055 = DIRECTION('',(-1.,0.,0.)); +#37056 = ORIENTED_EDGE('',*,*,#37057,.F.); +#37057 = EDGE_CURVE('',#37058,#37050,#37060,.T.); +#37058 = VERTEX_POINT('',#37059); +#37059 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#37060 = LINE('',#37061,#37062); +#37061 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37062 = VECTOR('',#37063,1.); +#37063 = DIRECTION('',(0.,1.,0.)); +#37064 = ORIENTED_EDGE('',*,*,#37065,.T.); +#37065 = EDGE_CURVE('',#37058,#37066,#37068,.T.); +#37066 = VERTEX_POINT('',#37067); +#37067 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#37068 = LINE('',#37069,#37070); +#37069 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#37070 = VECTOR('',#37071,1.); +#37071 = DIRECTION('',(1.,0.,0.)); +#37072 = ORIENTED_EDGE('',*,*,#37073,.T.); +#37073 = EDGE_CURVE('',#37066,#37074,#37076,.T.); +#37074 = VERTEX_POINT('',#37075); +#37075 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#37076 = LINE('',#37077,#37078); +#37077 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#37078 = VECTOR('',#37079,1.); +#37079 = DIRECTION('',(0.,-1.,0.)); +#37080 = ORIENTED_EDGE('',*,*,#37081,.T.); +#37081 = EDGE_CURVE('',#37074,#37082,#37084,.T.); +#37082 = VERTEX_POINT('',#37083); +#37083 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#37084 = LINE('',#37085,#37086); +#37085 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#37086 = VECTOR('',#37087,1.); +#37087 = DIRECTION('',(-1.,0.,0.)); +#37088 = ORIENTED_EDGE('',*,*,#37089,.F.); +#37089 = EDGE_CURVE('',#37090,#37082,#37092,.T.); +#37090 = VERTEX_POINT('',#37091); +#37091 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#37092 = LINE('',#37093,#37094); +#37093 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37094 = VECTOR('',#37095,1.); +#37095 = DIRECTION('',(0.,1.,0.)); +#37096 = ORIENTED_EDGE('',*,*,#37097,.T.); +#37097 = EDGE_CURVE('',#37090,#37098,#37100,.T.); +#37098 = VERTEX_POINT('',#37099); +#37099 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#37100 = LINE('',#37101,#37102); +#37101 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#37102 = VECTOR('',#37103,1.); +#37103 = DIRECTION('',(1.,0.,0.)); +#37104 = ORIENTED_EDGE('',*,*,#37105,.T.); +#37105 = EDGE_CURVE('',#37098,#37106,#37108,.T.); +#37106 = VERTEX_POINT('',#37107); +#37107 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#37108 = LINE('',#37109,#37110); +#37109 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#37110 = VECTOR('',#37111,1.); +#37111 = DIRECTION('',(0.,-1.,0.)); +#37112 = ORIENTED_EDGE('',*,*,#37113,.T.); +#37113 = EDGE_CURVE('',#37106,#37114,#37116,.T.); +#37114 = VERTEX_POINT('',#37115); +#37115 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#37116 = LINE('',#37117,#37118); +#37117 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#37118 = VECTOR('',#37119,1.); +#37119 = DIRECTION('',(-1.,0.,0.)); +#37120 = ORIENTED_EDGE('',*,*,#37121,.F.); +#37121 = EDGE_CURVE('',#37122,#37114,#37124,.T.); +#37122 = VERTEX_POINT('',#37123); +#37123 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#37124 = LINE('',#37125,#37126); +#37125 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37126 = VECTOR('',#37127,1.); +#37127 = DIRECTION('',(0.,1.,0.)); +#37128 = ORIENTED_EDGE('',*,*,#37129,.T.); +#37129 = EDGE_CURVE('',#37122,#37130,#37132,.T.); +#37130 = VERTEX_POINT('',#37131); +#37131 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#37132 = LINE('',#37133,#37134); +#37133 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#37134 = VECTOR('',#37135,1.); +#37135 = DIRECTION('',(1.,0.,0.)); +#37136 = ORIENTED_EDGE('',*,*,#37137,.T.); +#37137 = EDGE_CURVE('',#37130,#37138,#37140,.T.); +#37138 = VERTEX_POINT('',#37139); +#37139 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#37140 = LINE('',#37141,#37142); +#37141 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#37142 = VECTOR('',#37143,1.); +#37143 = DIRECTION('',(0.,-1.,0.)); +#37144 = ORIENTED_EDGE('',*,*,#37145,.T.); +#37145 = EDGE_CURVE('',#37138,#37146,#37148,.T.); +#37146 = VERTEX_POINT('',#37147); +#37147 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#37148 = LINE('',#37149,#37150); +#37149 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#37150 = VECTOR('',#37151,1.); +#37151 = DIRECTION('',(-1.,0.,0.)); +#37152 = ORIENTED_EDGE('',*,*,#37153,.F.); +#37153 = EDGE_CURVE('',#37154,#37146,#37156,.T.); +#37154 = VERTEX_POINT('',#37155); +#37155 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37156 = LINE('',#37157,#37158); +#37157 = CARTESIAN_POINT('',(-9.,-12.75,0.8)); +#37158 = VECTOR('',#37159,1.); +#37159 = DIRECTION('',(0.,1.,0.)); +#37160 = ORIENTED_EDGE('',*,*,#37161,.F.); +#37161 = EDGE_CURVE('',#37162,#37154,#37164,.T.); +#37162 = VERTEX_POINT('',#37163); +#37163 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#37164 = LINE('',#37165,#37166); +#37165 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37166 = VECTOR('',#37167,1.); +#37167 = DIRECTION('',(-1.,0.,0.)); +#37168 = ORIENTED_EDGE('',*,*,#37169,.T.); +#37169 = EDGE_CURVE('',#37162,#37170,#37172,.T.); +#37170 = VERTEX_POINT('',#37171); +#37171 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#37172 = LINE('',#37173,#37174); +#37173 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#37174 = VECTOR('',#37175,1.); +#37175 = DIRECTION('',(0.,1.,0.)); +#37176 = ORIENTED_EDGE('',*,*,#37177,.T.); +#37177 = EDGE_CURVE('',#37170,#37178,#37180,.T.); +#37178 = VERTEX_POINT('',#37179); +#37179 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#37180 = LINE('',#37181,#37182); +#37181 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#37182 = VECTOR('',#37183,1.); +#37183 = DIRECTION('',(1.,0.,0.)); +#37184 = ORIENTED_EDGE('',*,*,#37185,.T.); +#37185 = EDGE_CURVE('',#37178,#37186,#37188,.T.); +#37186 = VERTEX_POINT('',#37187); +#37187 = CARTESIAN_POINT('',(-6.535,-12.75,0.8)); +#37188 = LINE('',#37189,#37190); +#37189 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#37190 = VECTOR('',#37191,1.); +#37191 = DIRECTION('',(0.,-1.,0.)); +#37192 = ORIENTED_EDGE('',*,*,#37193,.F.); +#37193 = EDGE_CURVE('',#37194,#37186,#37196,.T.); +#37194 = VERTEX_POINT('',#37195); +#37195 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#37196 = LINE('',#37197,#37198); +#37197 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37198 = VECTOR('',#37199,1.); +#37199 = DIRECTION('',(-1.,0.,0.)); +#37200 = ORIENTED_EDGE('',*,*,#37201,.T.); +#37201 = EDGE_CURVE('',#37194,#37202,#37204,.T.); +#37202 = VERTEX_POINT('',#37203); +#37203 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#37204 = LINE('',#37205,#37206); +#37205 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#37206 = VECTOR('',#37207,1.); +#37207 = DIRECTION('',(0.,1.,0.)); +#37208 = ORIENTED_EDGE('',*,*,#37209,.T.); +#37209 = EDGE_CURVE('',#37202,#37210,#37212,.T.); +#37210 = VERTEX_POINT('',#37211); +#37211 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#37212 = LINE('',#37213,#37214); +#37213 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#37214 = VECTOR('',#37215,1.); +#37215 = DIRECTION('',(1.,0.,0.)); +#37216 = ORIENTED_EDGE('',*,*,#37217,.T.); +#37217 = EDGE_CURVE('',#37210,#37218,#37220,.T.); +#37218 = VERTEX_POINT('',#37219); +#37219 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#37220 = LINE('',#37221,#37222); +#37221 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#37222 = VECTOR('',#37223,1.); +#37223 = DIRECTION('',(0.,-1.,0.)); +#37224 = ORIENTED_EDGE('',*,*,#37225,.F.); +#37225 = EDGE_CURVE('',#37226,#37218,#37228,.T.); +#37226 = VERTEX_POINT('',#37227); +#37227 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#37228 = LINE('',#37229,#37230); +#37229 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37230 = VECTOR('',#37231,1.); +#37231 = DIRECTION('',(-1.,0.,0.)); +#37232 = ORIENTED_EDGE('',*,*,#37233,.T.); +#37233 = EDGE_CURVE('',#37226,#37234,#37236,.T.); +#37234 = VERTEX_POINT('',#37235); +#37235 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#37236 = LINE('',#37237,#37238); +#37237 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#37238 = VECTOR('',#37239,1.); +#37239 = DIRECTION('',(0.,1.,0.)); +#37240 = ORIENTED_EDGE('',*,*,#37241,.T.); +#37241 = EDGE_CURVE('',#37234,#37242,#37244,.T.); +#37242 = VERTEX_POINT('',#37243); +#37243 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#37244 = LINE('',#37245,#37246); +#37245 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#37246 = VECTOR('',#37247,1.); +#37247 = DIRECTION('',(1.,0.,0.)); +#37248 = ORIENTED_EDGE('',*,*,#37249,.T.); +#37249 = EDGE_CURVE('',#37242,#37250,#37252,.T.); +#37250 = VERTEX_POINT('',#37251); +#37251 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#37252 = LINE('',#37253,#37254); +#37253 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#37254 = VECTOR('',#37255,1.); +#37255 = DIRECTION('',(0.,-1.,0.)); +#37256 = ORIENTED_EDGE('',*,*,#37257,.F.); +#37257 = EDGE_CURVE('',#37258,#37250,#37260,.T.); +#37258 = VERTEX_POINT('',#37259); +#37259 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#37260 = LINE('',#37261,#37262); +#37261 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37262 = VECTOR('',#37263,1.); +#37263 = DIRECTION('',(-1.,0.,0.)); +#37264 = ORIENTED_EDGE('',*,*,#37265,.T.); +#37265 = EDGE_CURVE('',#37258,#37266,#37268,.T.); +#37266 = VERTEX_POINT('',#37267); +#37267 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#37268 = LINE('',#37269,#37270); +#37269 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#37270 = VECTOR('',#37271,1.); +#37271 = DIRECTION('',(0.,1.,0.)); +#37272 = ORIENTED_EDGE('',*,*,#37273,.T.); +#37273 = EDGE_CURVE('',#37266,#37274,#37276,.T.); +#37274 = VERTEX_POINT('',#37275); +#37275 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#37276 = LINE('',#37277,#37278); +#37277 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#37278 = VECTOR('',#37279,1.); +#37279 = DIRECTION('',(1.,0.,0.)); +#37280 = ORIENTED_EDGE('',*,*,#37281,.T.); +#37281 = EDGE_CURVE('',#37274,#37282,#37284,.T.); +#37282 = VERTEX_POINT('',#37283); +#37283 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#37284 = LINE('',#37285,#37286); +#37285 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#37286 = VECTOR('',#37287,1.); +#37287 = DIRECTION('',(0.,-1.,0.)); +#37288 = ORIENTED_EDGE('',*,*,#37289,.F.); +#37289 = EDGE_CURVE('',#37290,#37282,#37292,.T.); +#37290 = VERTEX_POINT('',#37291); +#37291 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#37292 = LINE('',#37293,#37294); +#37293 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37294 = VECTOR('',#37295,1.); +#37295 = DIRECTION('',(-1.,0.,0.)); +#37296 = ORIENTED_EDGE('',*,*,#37297,.T.); +#37297 = EDGE_CURVE('',#37290,#37298,#37300,.T.); +#37298 = VERTEX_POINT('',#37299); +#37299 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#37300 = LINE('',#37301,#37302); +#37301 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#37302 = VECTOR('',#37303,1.); +#37303 = DIRECTION('',(0.,1.,0.)); +#37304 = ORIENTED_EDGE('',*,*,#37305,.T.); +#37305 = EDGE_CURVE('',#37298,#37306,#37308,.T.); +#37306 = VERTEX_POINT('',#37307); +#37307 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#37308 = LINE('',#37309,#37310); +#37309 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#37310 = VECTOR('',#37311,1.); +#37311 = DIRECTION('',(1.,0.,0.)); +#37312 = ORIENTED_EDGE('',*,*,#37313,.T.); +#37313 = EDGE_CURVE('',#37306,#37314,#37316,.T.); +#37314 = VERTEX_POINT('',#37315); +#37315 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#37316 = LINE('',#37317,#37318); +#37317 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#37318 = VECTOR('',#37319,1.); +#37319 = DIRECTION('',(0.,-1.,0.)); +#37320 = ORIENTED_EDGE('',*,*,#37321,.F.); +#37321 = EDGE_CURVE('',#37322,#37314,#37324,.T.); +#37322 = VERTEX_POINT('',#37323); +#37323 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#37324 = LINE('',#37325,#37326); +#37325 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37326 = VECTOR('',#37327,1.); +#37327 = DIRECTION('',(-1.,0.,0.)); +#37328 = ORIENTED_EDGE('',*,*,#37329,.T.); +#37329 = EDGE_CURVE('',#37322,#37330,#37332,.T.); +#37330 = VERTEX_POINT('',#37331); +#37331 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#37332 = LINE('',#37333,#37334); +#37333 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#37334 = VECTOR('',#37335,1.); +#37335 = DIRECTION('',(0.,1.,0.)); +#37336 = ORIENTED_EDGE('',*,*,#37337,.T.); +#37337 = EDGE_CURVE('',#37330,#37338,#37340,.T.); +#37338 = VERTEX_POINT('',#37339); +#37339 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#37340 = LINE('',#37341,#37342); +#37341 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#37342 = VECTOR('',#37343,1.); +#37343 = DIRECTION('',(1.,0.,0.)); +#37344 = ORIENTED_EDGE('',*,*,#37345,.T.); +#37345 = EDGE_CURVE('',#37338,#37346,#37348,.T.); +#37346 = VERTEX_POINT('',#37347); +#37347 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#37348 = LINE('',#37349,#37350); +#37349 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#37350 = VECTOR('',#37351,1.); +#37351 = DIRECTION('',(0.,-1.,0.)); +#37352 = ORIENTED_EDGE('',*,*,#37353,.F.); +#37353 = EDGE_CURVE('',#37354,#37346,#37356,.T.); +#37354 = VERTEX_POINT('',#37355); +#37355 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#37356 = LINE('',#37357,#37358); +#37357 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37358 = VECTOR('',#37359,1.); +#37359 = DIRECTION('',(-1.,0.,0.)); +#37360 = ORIENTED_EDGE('',*,*,#37361,.F.); +#37361 = EDGE_CURVE('',#37362,#37354,#37364,.T.); +#37362 = VERTEX_POINT('',#37363); +#37363 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#37364 = LINE('',#37365,#37366); +#37365 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#37366 = VECTOR('',#37367,1.); +#37367 = DIRECTION('',(-0.,-1.,-0.)); +#37368 = ORIENTED_EDGE('',*,*,#37369,.F.); +#37369 = EDGE_CURVE('',#37370,#37362,#37372,.T.); +#37370 = VERTEX_POINT('',#37371); +#37371 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#37372 = LINE('',#37373,#37374); +#37373 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#37374 = VECTOR('',#37375,1.); +#37375 = DIRECTION('',(-1.,-0.,-0.)); +#37376 = ORIENTED_EDGE('',*,*,#37377,.F.); +#37377 = EDGE_CURVE('',#37378,#37370,#37380,.T.); +#37378 = VERTEX_POINT('',#37379); +#37379 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#37380 = LINE('',#37381,#37382); +#37381 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#37382 = VECTOR('',#37383,1.); +#37383 = DIRECTION('',(0.,1.,0.)); +#37384 = ORIENTED_EDGE('',*,*,#37385,.F.); +#37385 = EDGE_CURVE('',#37386,#37378,#37388,.T.); +#37386 = VERTEX_POINT('',#37387); +#37387 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#37388 = LINE('',#37389,#37390); +#37389 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37390 = VECTOR('',#37391,1.); +#37391 = DIRECTION('',(-1.,0.,0.)); +#37392 = ORIENTED_EDGE('',*,*,#37393,.F.); +#37393 = EDGE_CURVE('',#37394,#37386,#37396,.T.); +#37394 = VERTEX_POINT('',#37395); +#37395 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#37396 = LINE('',#37397,#37398); +#37397 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#37398 = VECTOR('',#37399,1.); +#37399 = DIRECTION('',(-0.,-1.,-0.)); +#37400 = ORIENTED_EDGE('',*,*,#37401,.F.); +#37401 = EDGE_CURVE('',#37402,#37394,#37404,.T.); +#37402 = VERTEX_POINT('',#37403); +#37403 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#37404 = LINE('',#37405,#37406); +#37405 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#37406 = VECTOR('',#37407,1.); +#37407 = DIRECTION('',(-1.,-0.,-0.)); +#37408 = ORIENTED_EDGE('',*,*,#37409,.F.); +#37409 = EDGE_CURVE('',#37410,#37402,#37412,.T.); +#37410 = VERTEX_POINT('',#37411); +#37411 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#37412 = LINE('',#37413,#37414); +#37413 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#37414 = VECTOR('',#37415,1.); +#37415 = DIRECTION('',(0.,1.,0.)); +#37416 = ORIENTED_EDGE('',*,*,#37417,.F.); +#37417 = EDGE_CURVE('',#37418,#37410,#37420,.T.); +#37418 = VERTEX_POINT('',#37419); +#37419 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#37420 = LINE('',#37421,#37422); +#37421 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37422 = VECTOR('',#37423,1.); +#37423 = DIRECTION('',(-1.,0.,0.)); +#37424 = ORIENTED_EDGE('',*,*,#37425,.F.); +#37425 = EDGE_CURVE('',#37426,#37418,#37428,.T.); +#37426 = VERTEX_POINT('',#37427); +#37427 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#37428 = LINE('',#37429,#37430); +#37429 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#37430 = VECTOR('',#37431,1.); +#37431 = DIRECTION('',(-0.,-1.,-0.)); +#37432 = ORIENTED_EDGE('',*,*,#37433,.F.); +#37433 = EDGE_CURVE('',#37434,#37426,#37436,.T.); +#37434 = VERTEX_POINT('',#37435); +#37435 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#37436 = LINE('',#37437,#37438); +#37437 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#37438 = VECTOR('',#37439,1.); +#37439 = DIRECTION('',(-1.,-0.,-0.)); +#37440 = ORIENTED_EDGE('',*,*,#37441,.F.); +#37441 = EDGE_CURVE('',#37442,#37434,#37444,.T.); +#37442 = VERTEX_POINT('',#37443); +#37443 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#37444 = LINE('',#37445,#37446); +#37445 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#37446 = VECTOR('',#37447,1.); +#37447 = DIRECTION('',(0.,1.,0.)); +#37448 = ORIENTED_EDGE('',*,*,#37449,.F.); +#37449 = EDGE_CURVE('',#37450,#37442,#37452,.T.); +#37450 = VERTEX_POINT('',#37451); +#37451 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#37452 = LINE('',#37453,#37454); +#37453 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37454 = VECTOR('',#37455,1.); +#37455 = DIRECTION('',(-1.,0.,0.)); +#37456 = ORIENTED_EDGE('',*,*,#37457,.F.); +#37457 = EDGE_CURVE('',#37458,#37450,#37460,.T.); +#37458 = VERTEX_POINT('',#37459); +#37459 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#37460 = LINE('',#37461,#37462); +#37461 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#37462 = VECTOR('',#37463,1.); +#37463 = DIRECTION('',(-0.,-1.,-0.)); +#37464 = ORIENTED_EDGE('',*,*,#37465,.F.); +#37465 = EDGE_CURVE('',#37466,#37458,#37468,.T.); +#37466 = VERTEX_POINT('',#37467); +#37467 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#37468 = LINE('',#37469,#37470); +#37469 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#37470 = VECTOR('',#37471,1.); +#37471 = DIRECTION('',(-1.,-0.,-0.)); +#37472 = ORIENTED_EDGE('',*,*,#37473,.F.); +#37473 = EDGE_CURVE('',#37474,#37466,#37476,.T.); +#37474 = VERTEX_POINT('',#37475); +#37475 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#37476 = LINE('',#37477,#37478); +#37477 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#37478 = VECTOR('',#37479,1.); +#37479 = DIRECTION('',(0.,1.,0.)); +#37480 = ORIENTED_EDGE('',*,*,#37481,.F.); +#37481 = EDGE_CURVE('',#37482,#37474,#37484,.T.); +#37482 = VERTEX_POINT('',#37483); +#37483 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#37484 = LINE('',#37485,#37486); +#37485 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37486 = VECTOR('',#37487,1.); +#37487 = DIRECTION('',(-1.,0.,0.)); +#37488 = ORIENTED_EDGE('',*,*,#37489,.F.); +#37489 = EDGE_CURVE('',#37490,#37482,#37492,.T.); +#37490 = VERTEX_POINT('',#37491); +#37491 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#37492 = LINE('',#37493,#37494); +#37493 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#37494 = VECTOR('',#37495,1.); +#37495 = DIRECTION('',(-0.,-1.,-0.)); +#37496 = ORIENTED_EDGE('',*,*,#37497,.F.); +#37497 = EDGE_CURVE('',#37498,#37490,#37500,.T.); +#37498 = VERTEX_POINT('',#37499); +#37499 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#37500 = LINE('',#37501,#37502); +#37501 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#37502 = VECTOR('',#37503,1.); +#37503 = DIRECTION('',(-1.,-0.,-0.)); +#37504 = ORIENTED_EDGE('',*,*,#37505,.F.); +#37505 = EDGE_CURVE('',#37506,#37498,#37508,.T.); +#37506 = VERTEX_POINT('',#37507); +#37507 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#37508 = LINE('',#37509,#37510); +#37509 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#37510 = VECTOR('',#37511,1.); +#37511 = DIRECTION('',(0.,1.,0.)); +#37512 = ORIENTED_EDGE('',*,*,#37513,.F.); +#37513 = EDGE_CURVE('',#37514,#37506,#37516,.T.); +#37514 = VERTEX_POINT('',#37515); +#37515 = CARTESIAN_POINT('',(6.535,-12.75,0.8)); +#37516 = LINE('',#37517,#37518); +#37517 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37518 = VECTOR('',#37519,1.); +#37519 = DIRECTION('',(-1.,0.,0.)); +#37520 = ORIENTED_EDGE('',*,*,#37521,.F.); +#37521 = EDGE_CURVE('',#37522,#37514,#37524,.T.); +#37522 = VERTEX_POINT('',#37523); +#37523 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#37524 = LINE('',#37525,#37526); +#37525 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#37526 = VECTOR('',#37527,1.); +#37527 = DIRECTION('',(-0.,-1.,-0.)); +#37528 = ORIENTED_EDGE('',*,*,#37529,.F.); +#37529 = EDGE_CURVE('',#37530,#37522,#37532,.T.); +#37530 = VERTEX_POINT('',#37531); +#37531 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#37532 = LINE('',#37533,#37534); +#37533 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#37534 = VECTOR('',#37535,1.); +#37535 = DIRECTION('',(-1.,-0.,-0.)); +#37536 = ORIENTED_EDGE('',*,*,#37537,.F.); +#37537 = EDGE_CURVE('',#37538,#37530,#37540,.T.); +#37538 = VERTEX_POINT('',#37539); +#37539 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#37540 = LINE('',#37541,#37542); +#37541 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#37542 = VECTOR('',#37543,1.); +#37543 = DIRECTION('',(0.,1.,0.)); +#37544 = ORIENTED_EDGE('',*,*,#37545,.F.); +#37545 = EDGE_CURVE('',#37546,#37538,#37548,.T.); +#37546 = VERTEX_POINT('',#37547); +#37547 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37548 = LINE('',#37549,#37550); +#37549 = CARTESIAN_POINT('',(9.,-12.75,0.8)); +#37550 = VECTOR('',#37551,1.); +#37551 = DIRECTION('',(-1.,0.,0.)); +#37552 = ORIENTED_EDGE('',*,*,#37553,.F.); +#37553 = EDGE_CURVE('',#37554,#37546,#37556,.T.); +#37554 = VERTEX_POINT('',#37555); +#37555 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#37556 = LINE('',#37557,#37558); +#37557 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37558 = VECTOR('',#37559,1.); +#37559 = DIRECTION('',(0.,-1.,0.)); +#37560 = ORIENTED_EDGE('',*,*,#37561,.F.); +#37561 = EDGE_CURVE('',#37562,#37554,#37564,.T.); +#37562 = VERTEX_POINT('',#37563); +#37563 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#37564 = LINE('',#37565,#37566); +#37565 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#37566 = VECTOR('',#37567,1.); +#37567 = DIRECTION('',(1.,0.,0.)); +#37568 = ORIENTED_EDGE('',*,*,#37569,.F.); +#37569 = EDGE_CURVE('',#37570,#37562,#37572,.T.); +#37570 = VERTEX_POINT('',#37571); +#37571 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#37572 = LINE('',#37573,#37574); +#37573 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#37574 = VECTOR('',#37575,1.); +#37575 = DIRECTION('',(-0.,-1.,-0.)); +#37576 = ORIENTED_EDGE('',*,*,#37577,.F.); +#37577 = EDGE_CURVE('',#37578,#37570,#37580,.T.); +#37578 = VERTEX_POINT('',#37579); +#37579 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#37580 = LINE('',#37581,#37582); +#37581 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#37582 = VECTOR('',#37583,1.); +#37583 = DIRECTION('',(-1.,-0.,-0.)); +#37584 = ORIENTED_EDGE('',*,*,#37585,.F.); +#37585 = EDGE_CURVE('',#37586,#37578,#37588,.T.); +#37586 = VERTEX_POINT('',#37587); +#37587 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#37588 = LINE('',#37589,#37590); +#37589 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37590 = VECTOR('',#37591,1.); +#37591 = DIRECTION('',(0.,-1.,0.)); +#37592 = ORIENTED_EDGE('',*,*,#37593,.F.); +#37593 = EDGE_CURVE('',#37594,#37586,#37596,.T.); +#37594 = VERTEX_POINT('',#37595); +#37595 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#37596 = LINE('',#37597,#37598); +#37597 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#37598 = VECTOR('',#37599,1.); +#37599 = DIRECTION('',(1.,0.,0.)); +#37600 = ORIENTED_EDGE('',*,*,#37601,.F.); +#37601 = EDGE_CURVE('',#37602,#37594,#37604,.T.); +#37602 = VERTEX_POINT('',#37603); +#37603 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#37604 = LINE('',#37605,#37606); +#37605 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#37606 = VECTOR('',#37607,1.); +#37607 = DIRECTION('',(-0.,-1.,-0.)); +#37608 = ORIENTED_EDGE('',*,*,#37609,.F.); +#37609 = EDGE_CURVE('',#37610,#37602,#37612,.T.); +#37610 = VERTEX_POINT('',#37611); +#37611 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#37612 = LINE('',#37613,#37614); +#37613 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#37614 = VECTOR('',#37615,1.); +#37615 = DIRECTION('',(-1.,-0.,-0.)); +#37616 = ORIENTED_EDGE('',*,*,#37617,.F.); +#37617 = EDGE_CURVE('',#37618,#37610,#37620,.T.); +#37618 = VERTEX_POINT('',#37619); +#37619 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#37620 = LINE('',#37621,#37622); +#37621 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37622 = VECTOR('',#37623,1.); +#37623 = DIRECTION('',(0.,-1.,0.)); +#37624 = ORIENTED_EDGE('',*,*,#37625,.F.); +#37625 = EDGE_CURVE('',#37626,#37618,#37628,.T.); +#37626 = VERTEX_POINT('',#37627); +#37627 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#37628 = LINE('',#37629,#37630); +#37629 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#37630 = VECTOR('',#37631,1.); +#37631 = DIRECTION('',(1.,0.,0.)); +#37632 = ORIENTED_EDGE('',*,*,#37633,.F.); +#37633 = EDGE_CURVE('',#37634,#37626,#37636,.T.); +#37634 = VERTEX_POINT('',#37635); +#37635 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#37636 = LINE('',#37637,#37638); +#37637 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#37638 = VECTOR('',#37639,1.); +#37639 = DIRECTION('',(-0.,-1.,-0.)); +#37640 = ORIENTED_EDGE('',*,*,#37641,.F.); +#37641 = EDGE_CURVE('',#37642,#37634,#37644,.T.); +#37642 = VERTEX_POINT('',#37643); +#37643 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#37644 = LINE('',#37645,#37646); +#37645 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#37646 = VECTOR('',#37647,1.); +#37647 = DIRECTION('',(-1.,-0.,-0.)); +#37648 = ORIENTED_EDGE('',*,*,#37649,.F.); +#37649 = EDGE_CURVE('',#37650,#37642,#37652,.T.); +#37650 = VERTEX_POINT('',#37651); +#37651 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#37652 = LINE('',#37653,#37654); +#37653 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37654 = VECTOR('',#37655,1.); +#37655 = DIRECTION('',(0.,-1.,0.)); +#37656 = ORIENTED_EDGE('',*,*,#37657,.F.); +#37657 = EDGE_CURVE('',#37658,#37650,#37660,.T.); +#37658 = VERTEX_POINT('',#37659); +#37659 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#37660 = LINE('',#37661,#37662); +#37661 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#37662 = VECTOR('',#37663,1.); +#37663 = DIRECTION('',(1.,0.,0.)); +#37664 = ORIENTED_EDGE('',*,*,#37665,.F.); +#37665 = EDGE_CURVE('',#37666,#37658,#37668,.T.); +#37666 = VERTEX_POINT('',#37667); +#37667 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#37668 = LINE('',#37669,#37670); +#37669 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#37670 = VECTOR('',#37671,1.); +#37671 = DIRECTION('',(-0.,-1.,-0.)); +#37672 = ORIENTED_EDGE('',*,*,#37673,.F.); +#37673 = EDGE_CURVE('',#37674,#37666,#37676,.T.); +#37674 = VERTEX_POINT('',#37675); +#37675 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#37676 = LINE('',#37677,#37678); +#37677 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#37678 = VECTOR('',#37679,1.); +#37679 = DIRECTION('',(-1.,-0.,-0.)); +#37680 = ORIENTED_EDGE('',*,*,#37681,.F.); +#37681 = EDGE_CURVE('',#37682,#37674,#37684,.T.); +#37682 = VERTEX_POINT('',#37683); +#37683 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#37684 = LINE('',#37685,#37686); +#37685 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37686 = VECTOR('',#37687,1.); +#37687 = DIRECTION('',(0.,-1.,0.)); +#37688 = ORIENTED_EDGE('',*,*,#37689,.F.); +#37689 = EDGE_CURVE('',#37690,#37682,#37692,.T.); +#37690 = VERTEX_POINT('',#37691); +#37691 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#37692 = LINE('',#37693,#37694); +#37693 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#37694 = VECTOR('',#37695,1.); +#37695 = DIRECTION('',(1.,0.,0.)); +#37696 = ORIENTED_EDGE('',*,*,#37697,.F.); +#37697 = EDGE_CURVE('',#37698,#37690,#37700,.T.); +#37698 = VERTEX_POINT('',#37699); +#37699 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#37700 = LINE('',#37701,#37702); +#37701 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#37702 = VECTOR('',#37703,1.); +#37703 = DIRECTION('',(-0.,-1.,-0.)); +#37704 = ORIENTED_EDGE('',*,*,#37705,.F.); +#37705 = EDGE_CURVE('',#37706,#37698,#37708,.T.); +#37706 = VERTEX_POINT('',#37707); +#37707 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#37708 = LINE('',#37709,#37710); +#37709 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#37710 = VECTOR('',#37711,1.); +#37711 = DIRECTION('',(-1.,-0.,-0.)); +#37712 = ORIENTED_EDGE('',*,*,#37713,.F.); +#37713 = EDGE_CURVE('',#37714,#37706,#37716,.T.); +#37714 = VERTEX_POINT('',#37715); +#37715 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#37716 = LINE('',#37717,#37718); +#37717 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37718 = VECTOR('',#37719,1.); +#37719 = DIRECTION('',(0.,-1.,0.)); +#37720 = ORIENTED_EDGE('',*,*,#37721,.F.); +#37721 = EDGE_CURVE('',#37722,#37714,#37724,.T.); +#37722 = VERTEX_POINT('',#37723); +#37723 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#37724 = LINE('',#37725,#37726); +#37725 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#37726 = VECTOR('',#37727,1.); +#37727 = DIRECTION('',(1.,0.,0.)); +#37728 = ORIENTED_EDGE('',*,*,#37729,.F.); +#37729 = EDGE_CURVE('',#37730,#37722,#37732,.T.); +#37730 = VERTEX_POINT('',#37731); +#37731 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#37732 = LINE('',#37733,#37734); +#37733 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#37734 = VECTOR('',#37735,1.); +#37735 = DIRECTION('',(-0.,-1.,-0.)); +#37736 = ORIENTED_EDGE('',*,*,#37737,.F.); +#37737 = EDGE_CURVE('',#37738,#37730,#37740,.T.); +#37738 = VERTEX_POINT('',#37739); +#37739 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#37740 = LINE('',#37741,#37742); +#37741 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#37742 = VECTOR('',#37743,1.); +#37743 = DIRECTION('',(-1.,-0.,-0.)); +#37744 = ORIENTED_EDGE('',*,*,#37745,.F.); +#37745 = EDGE_CURVE('',#37746,#37738,#37748,.T.); +#37746 = VERTEX_POINT('',#37747); +#37747 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#37748 = LINE('',#37749,#37750); +#37749 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37750 = VECTOR('',#37751,1.); +#37751 = DIRECTION('',(0.,-1.,0.)); +#37752 = ORIENTED_EDGE('',*,*,#37753,.F.); +#37753 = EDGE_CURVE('',#37754,#37746,#37756,.T.); +#37754 = VERTEX_POINT('',#37755); +#37755 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#37756 = LINE('',#37757,#37758); +#37757 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#37758 = VECTOR('',#37759,1.); +#37759 = DIRECTION('',(1.,0.,0.)); +#37760 = ORIENTED_EDGE('',*,*,#37761,.F.); +#37761 = EDGE_CURVE('',#37762,#37754,#37764,.T.); +#37762 = VERTEX_POINT('',#37763); +#37763 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#37764 = LINE('',#37765,#37766); +#37765 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#37766 = VECTOR('',#37767,1.); +#37767 = DIRECTION('',(-0.,-1.,-0.)); +#37768 = ORIENTED_EDGE('',*,*,#37769,.F.); +#37769 = EDGE_CURVE('',#37770,#37762,#37772,.T.); +#37770 = VERTEX_POINT('',#37771); +#37771 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#37772 = LINE('',#37773,#37774); +#37773 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#37774 = VECTOR('',#37775,1.); +#37775 = DIRECTION('',(-1.,-0.,-0.)); +#37776 = ORIENTED_EDGE('',*,*,#37777,.F.); +#37777 = EDGE_CURVE('',#37778,#37770,#37780,.T.); +#37778 = VERTEX_POINT('',#37779); +#37779 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#37780 = LINE('',#37781,#37782); +#37781 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37782 = VECTOR('',#37783,1.); +#37783 = DIRECTION('',(0.,-1.,0.)); +#37784 = ORIENTED_EDGE('',*,*,#37785,.F.); +#37785 = EDGE_CURVE('',#37786,#37778,#37788,.T.); +#37786 = VERTEX_POINT('',#37787); +#37787 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#37788 = LINE('',#37789,#37790); +#37789 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#37790 = VECTOR('',#37791,1.); +#37791 = DIRECTION('',(1.,0.,0.)); +#37792 = ORIENTED_EDGE('',*,*,#37793,.F.); +#37793 = EDGE_CURVE('',#37794,#37786,#37796,.T.); +#37794 = VERTEX_POINT('',#37795); +#37795 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#37796 = LINE('',#37797,#37798); +#37797 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#37798 = VECTOR('',#37799,1.); +#37799 = DIRECTION('',(-0.,-1.,-0.)); +#37800 = ORIENTED_EDGE('',*,*,#37801,.F.); +#37801 = EDGE_CURVE('',#37802,#37794,#37804,.T.); +#37802 = VERTEX_POINT('',#37803); +#37803 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#37804 = LINE('',#37805,#37806); +#37805 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#37806 = VECTOR('',#37807,1.); +#37807 = DIRECTION('',(-1.,-0.,-0.)); +#37808 = ORIENTED_EDGE('',*,*,#37809,.F.); +#37809 = EDGE_CURVE('',#37810,#37802,#37812,.T.); +#37810 = VERTEX_POINT('',#37811); +#37811 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#37812 = LINE('',#37813,#37814); +#37813 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37814 = VECTOR('',#37815,1.); +#37815 = DIRECTION('',(0.,-1.,0.)); +#37816 = ORIENTED_EDGE('',*,*,#37817,.F.); +#37817 = EDGE_CURVE('',#37818,#37810,#37820,.T.); +#37818 = VERTEX_POINT('',#37819); +#37819 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#37820 = LINE('',#37821,#37822); +#37821 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#37822 = VECTOR('',#37823,1.); +#37823 = DIRECTION('',(1.,0.,0.)); +#37824 = ORIENTED_EDGE('',*,*,#37825,.F.); +#37825 = EDGE_CURVE('',#37826,#37818,#37828,.T.); +#37826 = VERTEX_POINT('',#37827); +#37827 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#37828 = LINE('',#37829,#37830); +#37829 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#37830 = VECTOR('',#37831,1.); +#37831 = DIRECTION('',(-0.,-1.,-0.)); +#37832 = ORIENTED_EDGE('',*,*,#37833,.F.); +#37833 = EDGE_CURVE('',#37834,#37826,#37836,.T.); +#37834 = VERTEX_POINT('',#37835); +#37835 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#37836 = LINE('',#37837,#37838); +#37837 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#37838 = VECTOR('',#37839,1.); +#37839 = DIRECTION('',(-1.,-0.,-0.)); +#37840 = ORIENTED_EDGE('',*,*,#37841,.F.); +#37841 = EDGE_CURVE('',#37842,#37834,#37844,.T.); +#37842 = VERTEX_POINT('',#37843); +#37843 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#37844 = LINE('',#37845,#37846); +#37845 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37846 = VECTOR('',#37847,1.); +#37847 = DIRECTION('',(0.,-1.,0.)); +#37848 = ORIENTED_EDGE('',*,*,#37849,.F.); +#37849 = EDGE_CURVE('',#37850,#37842,#37852,.T.); +#37850 = VERTEX_POINT('',#37851); +#37851 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#37852 = LINE('',#37853,#37854); +#37853 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#37854 = VECTOR('',#37855,1.); +#37855 = DIRECTION('',(1.,0.,0.)); +#37856 = ORIENTED_EDGE('',*,*,#37857,.F.); +#37857 = EDGE_CURVE('',#37858,#37850,#37860,.T.); +#37858 = VERTEX_POINT('',#37859); +#37859 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#37860 = LINE('',#37861,#37862); +#37861 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#37862 = VECTOR('',#37863,1.); +#37863 = DIRECTION('',(-0.,-1.,-0.)); +#37864 = ORIENTED_EDGE('',*,*,#37865,.F.); +#37865 = EDGE_CURVE('',#37866,#37858,#37868,.T.); +#37866 = VERTEX_POINT('',#37867); +#37867 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#37868 = LINE('',#37869,#37870); +#37869 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#37870 = VECTOR('',#37871,1.); +#37871 = DIRECTION('',(-1.,-0.,-0.)); +#37872 = ORIENTED_EDGE('',*,*,#37873,.F.); +#37873 = EDGE_CURVE('',#37874,#37866,#37876,.T.); +#37874 = VERTEX_POINT('',#37875); +#37875 = CARTESIAN_POINT('',(9.,1.,0.8)); +#37876 = LINE('',#37877,#37878); +#37877 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37878 = VECTOR('',#37879,1.); +#37879 = DIRECTION('',(0.,-1.,0.)); +#37880 = ORIENTED_EDGE('',*,*,#37881,.F.); +#37881 = EDGE_CURVE('',#37882,#37874,#37884,.T.); +#37882 = VERTEX_POINT('',#37883); +#37883 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#37884 = LINE('',#37885,#37886); +#37885 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#37886 = VECTOR('',#37887,1.); +#37887 = DIRECTION('',(1.,0.,0.)); +#37888 = ORIENTED_EDGE('',*,*,#37889,.F.); +#37889 = EDGE_CURVE('',#37890,#37882,#37892,.T.); +#37890 = VERTEX_POINT('',#37891); +#37891 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#37892 = LINE('',#37893,#37894); +#37893 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#37894 = VECTOR('',#37895,1.); +#37895 = DIRECTION('',(-0.,-1.,-0.)); +#37896 = ORIENTED_EDGE('',*,*,#37897,.F.); +#37897 = EDGE_CURVE('',#37898,#37890,#37900,.T.); +#37898 = VERTEX_POINT('',#37899); +#37899 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#37900 = LINE('',#37901,#37902); +#37901 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#37902 = VECTOR('',#37903,1.); +#37903 = DIRECTION('',(-1.,-0.,-0.)); +#37904 = ORIENTED_EDGE('',*,*,#37905,.F.); +#37905 = EDGE_CURVE('',#37906,#37898,#37908,.T.); +#37906 = VERTEX_POINT('',#37907); +#37907 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#37908 = LINE('',#37909,#37910); +#37909 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37910 = VECTOR('',#37911,1.); +#37911 = DIRECTION('',(0.,-1.,0.)); +#37912 = ORIENTED_EDGE('',*,*,#37913,.F.); +#37913 = EDGE_CURVE('',#37914,#37906,#37916,.T.); +#37914 = VERTEX_POINT('',#37915); +#37915 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#37916 = LINE('',#37917,#37918); +#37917 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#37918 = VECTOR('',#37919,1.); +#37919 = DIRECTION('',(1.,0.,0.)); +#37920 = ORIENTED_EDGE('',*,*,#37921,.F.); +#37921 = EDGE_CURVE('',#37922,#37914,#37924,.T.); +#37922 = VERTEX_POINT('',#37923); +#37923 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#37924 = LINE('',#37925,#37926); +#37925 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#37926 = VECTOR('',#37927,1.); +#37927 = DIRECTION('',(-0.,-1.,-0.)); +#37928 = ORIENTED_EDGE('',*,*,#37929,.F.); +#37929 = EDGE_CURVE('',#37930,#37922,#37932,.T.); +#37930 = VERTEX_POINT('',#37931); +#37931 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#37932 = LINE('',#37933,#37934); +#37933 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#37934 = VECTOR('',#37935,1.); +#37935 = DIRECTION('',(-1.,-0.,-0.)); +#37936 = ORIENTED_EDGE('',*,*,#37937,.F.); +#37937 = EDGE_CURVE('',#37938,#37930,#37940,.T.); +#37938 = VERTEX_POINT('',#37939); +#37939 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#37940 = LINE('',#37941,#37942); +#37941 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37942 = VECTOR('',#37943,1.); +#37943 = DIRECTION('',(0.,-1.,0.)); +#37944 = ORIENTED_EDGE('',*,*,#37945,.F.); +#37945 = EDGE_CURVE('',#37946,#37938,#37948,.T.); +#37946 = VERTEX_POINT('',#37947); +#37947 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#37948 = LINE('',#37949,#37950); +#37949 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#37950 = VECTOR('',#37951,1.); +#37951 = DIRECTION('',(1.,0.,0.)); +#37952 = ORIENTED_EDGE('',*,*,#37953,.F.); +#37953 = EDGE_CURVE('',#37954,#37946,#37956,.T.); +#37954 = VERTEX_POINT('',#37955); +#37955 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#37956 = LINE('',#37957,#37958); +#37957 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#37958 = VECTOR('',#37959,1.); +#37959 = DIRECTION('',(-0.,-1.,-0.)); +#37960 = ORIENTED_EDGE('',*,*,#37961,.F.); +#37961 = EDGE_CURVE('',#37962,#37954,#37964,.T.); +#37962 = VERTEX_POINT('',#37963); +#37963 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#37964 = LINE('',#37965,#37966); +#37965 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#37966 = VECTOR('',#37967,1.); +#37967 = DIRECTION('',(-1.,-0.,-0.)); +#37968 = ORIENTED_EDGE('',*,*,#37969,.F.); +#37969 = EDGE_CURVE('',#37970,#37962,#37972,.T.); +#37970 = VERTEX_POINT('',#37971); +#37971 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#37972 = LINE('',#37973,#37974); +#37973 = CARTESIAN_POINT('',(9.,12.75,0.8)); +#37974 = VECTOR('',#37975,1.); +#37975 = DIRECTION('',(0.,-1.,0.)); +#37976 = ORIENTED_EDGE('',*,*,#37977,.F.); +#37977 = EDGE_CURVE('',#37978,#37970,#37980,.T.); +#37978 = VERTEX_POINT('',#37979); +#37979 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#37980 = LINE('',#37981,#37982); +#37981 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#37982 = VECTOR('',#37983,1.); +#37983 = DIRECTION('',(1.,0.,0.)); +#37984 = ORIENTED_EDGE('',*,*,#37985,.F.); +#37985 = EDGE_CURVE('',#37986,#37978,#37988,.T.); +#37986 = VERTEX_POINT('',#37987); +#37987 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#37988 = LINE('',#37989,#37990); +#37989 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#37990 = VECTOR('',#37991,1.); +#37991 = DIRECTION('',(-0.,-1.,-0.)); +#37992 = ORIENTED_EDGE('',*,*,#37993,.F.); +#37993 = EDGE_CURVE('',#34439,#37986,#37994,.T.); +#37994 = LINE('',#37995,#37996); +#37995 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#37996 = VECTOR('',#37997,1.); +#37997 = DIRECTION('',(-1.,-0.,-0.)); +#37998 = ORIENTED_EDGE('',*,*,#34438,.F.); +#37999 = PLANE('',#38000); +#38000 = AXIS2_PLACEMENT_3D('',#38001,#38002,#38003); +#38001 = CARTESIAN_POINT('',(0.,0.,0.8)); +#38002 = DIRECTION('',(0.,0.,1.)); +#38003 = DIRECTION('',(1.,0.,-0.)); +#38004 = ADVANCED_FACE('',(#38005),#38023,.T.); +#38005 = FACE_BOUND('',#38006,.T.); +#38006 = EDGE_LOOP('',(#38007,#38008,#38016,#38022)); +#38007 = ORIENTED_EDGE('',*,*,#34406,.T.); +#38008 = ORIENTED_EDGE('',*,*,#38009,.T.); +#38009 = EDGE_CURVE('',#34399,#38010,#38012,.T.); +#38010 = VERTEX_POINT('',#38011); +#38011 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#38012 = LINE('',#38013,#38014); +#38013 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#38014 = VECTOR('',#38015,1.); +#38015 = DIRECTION('',(1.,0.,0.)); +#38016 = ORIENTED_EDGE('',*,*,#38017,.F.); +#38017 = EDGE_CURVE('',#36714,#38010,#38018,.T.); +#38018 = LINE('',#38019,#38020); +#38019 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#38020 = VECTOR('',#38021,1.); +#38021 = DIRECTION('',(-0.,-0.,-1.)); +#38022 = ORIENTED_EDGE('',*,*,#36713,.F.); +#38023 = PLANE('',#38024); +#38024 = AXIS2_PLACEMENT_3D('',#38025,#38026,#38027); +#38025 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#38026 = DIRECTION('',(0.,-1.,0.)); +#38027 = DIRECTION('',(1.,0.,0.)); +#38028 = ADVANCED_FACE('',(#38029),#38040,.T.); +#38029 = FACE_BOUND('',#38030,.T.); +#38030 = EDGE_LOOP('',(#38031,#38032,#38033,#38034)); +#38031 = ORIENTED_EDGE('',*,*,#38009,.F.); +#38032 = ORIENTED_EDGE('',*,*,#34398,.T.); +#38033 = ORIENTED_EDGE('',*,*,#34470,.T.); +#38034 = ORIENTED_EDGE('',*,*,#38035,.F.); +#38035 = EDGE_CURVE('',#38010,#34471,#38036,.T.); +#38036 = LINE('',#38037,#38038); +#38037 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#38038 = VECTOR('',#38039,1.); +#38039 = DIRECTION('',(-0.,-0.,-1.)); +#38040 = PLANE('',#38041); +#38041 = AXIS2_PLACEMENT_3D('',#38042,#38043,#38044); +#38042 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#38043 = DIRECTION('',(0.,-1.,0.)); +#38044 = DIRECTION('',(1.,0.,0.)); +#38045 = ADVANCED_FACE('',(#38046),#38064,.T.); +#38046 = FACE_BOUND('',#38047,.F.); +#38047 = EDGE_LOOP('',(#38048,#38056,#38057,#38058)); +#38048 = ORIENTED_EDGE('',*,*,#38049,.F.); +#38049 = EDGE_CURVE('',#34447,#38050,#38052,.T.); +#38050 = VERTEX_POINT('',#38051); +#38051 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#38052 = LINE('',#38053,#38054); +#38053 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#38054 = VECTOR('',#38055,1.); +#38055 = DIRECTION('',(-1.,-0.,-0.)); +#38056 = ORIENTED_EDGE('',*,*,#34454,.T.); +#38057 = ORIENTED_EDGE('',*,*,#36390,.T.); +#38058 = ORIENTED_EDGE('',*,*,#38059,.F.); +#38059 = EDGE_CURVE('',#38050,#36383,#38060,.T.); +#38060 = LINE('',#38061,#38062); +#38061 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#38062 = VECTOR('',#38063,1.); +#38063 = DIRECTION('',(0.,0.,-1.)); +#38064 = PLANE('',#38065); +#38065 = AXIS2_PLACEMENT_3D('',#38066,#38067,#38068); +#38066 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#38067 = DIRECTION('',(-0.,-1.,-0.)); +#38068 = DIRECTION('',(1.,-0.,0.)); +#38069 = ADVANCED_FACE('',(#38070),#38081,.T.); +#38070 = FACE_BOUND('',#38071,.F.); +#38071 = EDGE_LOOP('',(#38072,#38073,#38074,#38080)); +#38072 = ORIENTED_EDGE('',*,*,#34446,.T.); +#38073 = ORIENTED_EDGE('',*,*,#38049,.T.); +#38074 = ORIENTED_EDGE('',*,*,#38075,.F.); +#38075 = EDGE_CURVE('',#37986,#38050,#38076,.T.); +#38076 = LINE('',#38077,#38078); +#38077 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#38078 = VECTOR('',#38079,1.); +#38079 = DIRECTION('',(0.,0.,-1.)); +#38080 = ORIENTED_EDGE('',*,*,#37993,.F.); +#38081 = PLANE('',#38082); +#38082 = AXIS2_PLACEMENT_3D('',#38083,#38084,#38085); +#38083 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#38084 = DIRECTION('',(-0.,-1.,-0.)); +#38085 = DIRECTION('',(1.,-0.,0.)); +#38086 = ADVANCED_FACE('',(#38087),#38105,.F.); +#38087 = FACE_BOUND('',#38088,.F.); +#38088 = EDGE_LOOP('',(#38089,#38097,#38103,#38104)); +#38089 = ORIENTED_EDGE('',*,*,#38090,.T.); +#38090 = EDGE_CURVE('',#38010,#38091,#38093,.T.); +#38091 = VERTEX_POINT('',#38092); +#38092 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#38093 = LINE('',#38094,#38095); +#38094 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#38095 = VECTOR('',#38096,1.); +#38096 = DIRECTION('',(1.,0.,0.)); +#38097 = ORIENTED_EDGE('',*,*,#38098,.T.); +#38098 = EDGE_CURVE('',#38091,#34479,#38099,.T.); +#38099 = LINE('',#38100,#38101); +#38100 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#38101 = VECTOR('',#38102,1.); +#38102 = DIRECTION('',(-0.,-0.,-1.)); +#38103 = ORIENTED_EDGE('',*,*,#34478,.F.); +#38104 = ORIENTED_EDGE('',*,*,#38035,.F.); +#38105 = PLANE('',#38106); +#38106 = AXIS2_PLACEMENT_3D('',#38107,#38108,#38109); +#38107 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#38108 = DIRECTION('',(0.,1.,0.)); +#38109 = DIRECTION('',(0.,0.,-1.)); +#38110 = ADVANCED_FACE('',(#38111),#38129,.F.); +#38111 = FACE_BOUND('',#38112,.T.); +#38112 = EDGE_LOOP('',(#38113,#38121,#38127,#38128)); +#38113 = ORIENTED_EDGE('',*,*,#38114,.T.); +#38114 = EDGE_CURVE('',#38050,#38115,#38117,.T.); +#38115 = VERTEX_POINT('',#38116); +#38116 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#38117 = LINE('',#38118,#38119); +#38118 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#38119 = VECTOR('',#38120,1.); +#38120 = DIRECTION('',(-1.,-0.,-0.)); +#38121 = ORIENTED_EDGE('',*,*,#38122,.T.); +#38122 = EDGE_CURVE('',#38115,#36375,#38123,.T.); +#38123 = LINE('',#38124,#38125); +#38124 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#38125 = VECTOR('',#38126,1.); +#38126 = DIRECTION('',(0.,0.,-1.)); +#38127 = ORIENTED_EDGE('',*,*,#36382,.F.); +#38128 = ORIENTED_EDGE('',*,*,#38059,.F.); +#38129 = PLANE('',#38130); +#38130 = AXIS2_PLACEMENT_3D('',#38131,#38132,#38133); +#38131 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#38132 = DIRECTION('',(0.,1.,0.)); +#38133 = DIRECTION('',(0.,-0.,1.)); +#38134 = ADVANCED_FACE('',(#38135),#38153,.T.); +#38135 = FACE_BOUND('',#38136,.T.); +#38136 = EDGE_LOOP('',(#38137,#38145,#38146,#38147)); +#38137 = ORIENTED_EDGE('',*,*,#38138,.F.); +#38138 = EDGE_CURVE('',#38091,#38139,#38141,.T.); +#38139 = VERTEX_POINT('',#38140); +#38140 = CARTESIAN_POINT('',(-8.15,4.81,0.4)); +#38141 = LINE('',#38142,#38143); +#38142 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#38143 = VECTOR('',#38144,1.); +#38144 = DIRECTION('',(0.,-1.,0.)); +#38145 = ORIENTED_EDGE('',*,*,#38098,.T.); +#38146 = ORIENTED_EDGE('',*,*,#34486,.T.); +#38147 = ORIENTED_EDGE('',*,*,#38148,.F.); +#38148 = EDGE_CURVE('',#38139,#34487,#38149,.T.); +#38149 = LINE('',#38150,#38151); +#38150 = CARTESIAN_POINT('',(-8.15,4.81,0.4)); +#38151 = VECTOR('',#38152,1.); +#38152 = DIRECTION('',(-0.,-0.,-1.)); +#38153 = PLANE('',#38154); +#38154 = AXIS2_PLACEMENT_3D('',#38155,#38156,#38157); +#38155 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#38156 = DIRECTION('',(-1.,0.,0.)); +#38157 = DIRECTION('',(0.,-1.,0.)); +#38158 = ADVANCED_FACE('',(#38159),#38177,.T.); +#38159 = FACE_BOUND('',#38160,.F.); +#38160 = EDGE_LOOP('',(#38161,#38169,#38170,#38171)); +#38161 = ORIENTED_EDGE('',*,*,#38162,.F.); +#38162 = EDGE_CURVE('',#38115,#38163,#38165,.T.); +#38163 = VERTEX_POINT('',#38164); +#38164 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#38165 = LINE('',#38166,#38167); +#38166 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#38167 = VECTOR('',#38168,1.); +#38168 = DIRECTION('',(-0.,-1.,-0.)); +#38169 = ORIENTED_EDGE('',*,*,#38122,.T.); +#38170 = ORIENTED_EDGE('',*,*,#36374,.T.); +#38171 = ORIENTED_EDGE('',*,*,#38172,.F.); +#38172 = EDGE_CURVE('',#38163,#36367,#38173,.T.); +#38173 = LINE('',#38174,#38175); +#38174 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#38175 = VECTOR('',#38176,1.); +#38176 = DIRECTION('',(0.,0.,-1.)); +#38177 = PLANE('',#38178); +#38178 = AXIS2_PLACEMENT_3D('',#38179,#38180,#38181); +#38179 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#38180 = DIRECTION('',(1.,0.,0.)); +#38181 = DIRECTION('',(-0.,1.,0.)); +#38182 = ADVANCED_FACE('',(#38183),#38201,.T.); +#38183 = FACE_BOUND('',#38184,.T.); +#38184 = EDGE_LOOP('',(#38185,#38193,#38194,#38195)); +#38185 = ORIENTED_EDGE('',*,*,#38186,.T.); +#38186 = EDGE_CURVE('',#38187,#38139,#38189,.T.); +#38187 = VERTEX_POINT('',#38188); +#38188 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38189 = LINE('',#38190,#38191); +#38190 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38191 = VECTOR('',#38192,1.); +#38192 = DIRECTION('',(1.,0.,0.)); +#38193 = ORIENTED_EDGE('',*,*,#38148,.T.); +#38194 = ORIENTED_EDGE('',*,*,#34494,.F.); +#38195 = ORIENTED_EDGE('',*,*,#38196,.F.); +#38196 = EDGE_CURVE('',#38187,#34495,#38197,.T.); +#38197 = LINE('',#38198,#38199); +#38198 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38199 = VECTOR('',#38200,1.); +#38200 = DIRECTION('',(-0.,-0.,-1.)); +#38201 = PLANE('',#38202); +#38202 = AXIS2_PLACEMENT_3D('',#38203,#38204,#38205); +#38203 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38204 = DIRECTION('',(0.,1.,0.)); +#38205 = DIRECTION('',(0.,0.,-1.)); +#38206 = ADVANCED_FACE('',(#38207),#38225,.T.); +#38207 = FACE_BOUND('',#38208,.F.); +#38208 = EDGE_LOOP('',(#38209,#38217,#38218,#38219)); +#38209 = ORIENTED_EDGE('',*,*,#38210,.T.); +#38210 = EDGE_CURVE('',#38211,#38163,#38213,.T.); +#38211 = VERTEX_POINT('',#38212); +#38212 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38213 = LINE('',#38214,#38215); +#38214 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38215 = VECTOR('',#38216,1.); +#38216 = DIRECTION('',(-1.,-0.,-0.)); +#38217 = ORIENTED_EDGE('',*,*,#38172,.T.); +#38218 = ORIENTED_EDGE('',*,*,#36366,.F.); +#38219 = ORIENTED_EDGE('',*,*,#38220,.F.); +#38220 = EDGE_CURVE('',#38211,#36359,#38221,.T.); +#38221 = LINE('',#38222,#38223); +#38222 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38223 = VECTOR('',#38224,1.); +#38224 = DIRECTION('',(0.,0.,-1.)); +#38225 = PLANE('',#38226); +#38226 = AXIS2_PLACEMENT_3D('',#38227,#38228,#38229); +#38227 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38228 = DIRECTION('',(0.,1.,0.)); +#38229 = DIRECTION('',(0.,-0.,1.)); +#38230 = ADVANCED_FACE('',(#38231),#38249,.T.); +#38231 = FACE_BOUND('',#38232,.T.); +#38232 = EDGE_LOOP('',(#38233,#38241,#38242,#38243)); +#38233 = ORIENTED_EDGE('',*,*,#38234,.F.); +#38234 = EDGE_CURVE('',#38187,#38235,#38237,.T.); +#38235 = VERTEX_POINT('',#38236); +#38236 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#38237 = LINE('',#38238,#38239); +#38238 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38239 = VECTOR('',#38240,1.); +#38240 = DIRECTION('',(-1.,0.,0.)); +#38241 = ORIENTED_EDGE('',*,*,#38196,.T.); +#38242 = ORIENTED_EDGE('',*,*,#34502,.T.); +#38243 = ORIENTED_EDGE('',*,*,#38244,.F.); +#38244 = EDGE_CURVE('',#38235,#34503,#38245,.T.); +#38245 = LINE('',#38246,#38247); +#38246 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#38247 = VECTOR('',#38248,1.); +#38248 = DIRECTION('',(-0.,-0.,-1.)); +#38249 = PLANE('',#38250); +#38250 = AXIS2_PLACEMENT_3D('',#38251,#38252,#38253); +#38251 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#38252 = DIRECTION('',(0.,1.,0.)); +#38253 = DIRECTION('',(-1.,0.,0.)); +#38254 = ADVANCED_FACE('',(#38255),#38273,.T.); +#38255 = FACE_BOUND('',#38256,.F.); +#38256 = EDGE_LOOP('',(#38257,#38265,#38266,#38267)); +#38257 = ORIENTED_EDGE('',*,*,#38258,.F.); +#38258 = EDGE_CURVE('',#38211,#38259,#38261,.T.); +#38259 = VERTEX_POINT('',#38260); +#38260 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#38261 = LINE('',#38262,#38263); +#38262 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38263 = VECTOR('',#38264,1.); +#38264 = DIRECTION('',(1.,0.,0.)); +#38265 = ORIENTED_EDGE('',*,*,#38220,.T.); +#38266 = ORIENTED_EDGE('',*,*,#36358,.T.); +#38267 = ORIENTED_EDGE('',*,*,#38268,.F.); +#38268 = EDGE_CURVE('',#38259,#36351,#38269,.T.); +#38269 = LINE('',#38270,#38271); +#38270 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#38271 = VECTOR('',#38272,1.); +#38272 = DIRECTION('',(0.,0.,-1.)); +#38273 = PLANE('',#38274); +#38274 = AXIS2_PLACEMENT_3D('',#38275,#38276,#38277); +#38275 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#38276 = DIRECTION('',(0.,1.,0.)); +#38277 = DIRECTION('',(-1.,0.,0.)); +#38278 = ADVANCED_FACE('',(#38279),#38304,.T.); +#38279 = FACE_BOUND('',#38280,.T.); +#38280 = EDGE_LOOP('',(#38281,#38282,#38290,#38296,#38297,#38303)); +#38281 = ORIENTED_EDGE('',*,*,#34510,.F.); +#38282 = ORIENTED_EDGE('',*,*,#38283,.F.); +#38283 = EDGE_CURVE('',#38284,#34511,#38286,.T.); +#38284 = VERTEX_POINT('',#38285); +#38285 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#38286 = LINE('',#38287,#38288); +#38287 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#38288 = VECTOR('',#38289,1.); +#38289 = DIRECTION('',(-0.,-0.,-1.)); +#38290 = ORIENTED_EDGE('',*,*,#38291,.F.); +#38291 = EDGE_CURVE('',#36738,#38284,#38292,.T.); +#38292 = LINE('',#38293,#38294); +#38293 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#38294 = VECTOR('',#38295,1.); +#38295 = DIRECTION('',(-0.,-0.,-1.)); +#38296 = ORIENTED_EDGE('',*,*,#36737,.T.); +#38297 = ORIENTED_EDGE('',*,*,#38298,.T.); +#38298 = EDGE_CURVE('',#36730,#38235,#38299,.T.); +#38299 = LINE('',#38300,#38301); +#38300 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#38301 = VECTOR('',#38302,1.); +#38302 = DIRECTION('',(-0.,-0.,-1.)); +#38303 = ORIENTED_EDGE('',*,*,#38244,.T.); +#38304 = PLANE('',#38305); +#38305 = AXIS2_PLACEMENT_3D('',#38306,#38307,#38308); +#38306 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#38307 = DIRECTION('',(-1.,0.,0.)); +#38308 = DIRECTION('',(0.,1.,0.)); +#38309 = ADVANCED_FACE('',(#38310),#38335,.T.); +#38310 = FACE_BOUND('',#38311,.T.); +#38311 = EDGE_LOOP('',(#38312,#38313,#38314,#38320,#38321,#38329)); +#38312 = ORIENTED_EDGE('',*,*,#36350,.F.); +#38313 = ORIENTED_EDGE('',*,*,#38268,.F.); +#38314 = ORIENTED_EDGE('',*,*,#38315,.F.); +#38315 = EDGE_CURVE('',#37970,#38259,#38316,.T.); +#38316 = LINE('',#38317,#38318); +#38317 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#38318 = VECTOR('',#38319,1.); +#38319 = DIRECTION('',(0.,0.,-1.)); +#38320 = ORIENTED_EDGE('',*,*,#37969,.T.); +#38321 = ORIENTED_EDGE('',*,*,#38322,.T.); +#38322 = EDGE_CURVE('',#37962,#38323,#38325,.T.); +#38323 = VERTEX_POINT('',#38324); +#38324 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#38325 = LINE('',#38326,#38327); +#38326 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#38327 = VECTOR('',#38328,1.); +#38328 = DIRECTION('',(0.,0.,-1.)); +#38329 = ORIENTED_EDGE('',*,*,#38330,.T.); +#38330 = EDGE_CURVE('',#38323,#36343,#38331,.T.); +#38331 = LINE('',#38332,#38333); +#38332 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#38333 = VECTOR('',#38334,1.); +#38334 = DIRECTION('',(0.,0.,-1.)); +#38335 = PLANE('',#38336); +#38336 = AXIS2_PLACEMENT_3D('',#38337,#38338,#38339); +#38337 = CARTESIAN_POINT('',(9.,12.75,0.)); +#38338 = DIRECTION('',(1.,0.,0.)); +#38339 = DIRECTION('',(0.,-1.,0.)); +#38340 = ADVANCED_FACE('',(#38341),#38359,.T.); +#38341 = FACE_BOUND('',#38342,.T.); +#38342 = EDGE_LOOP('',(#38343,#38351,#38352,#38353)); +#38343 = ORIENTED_EDGE('',*,*,#38344,.F.); +#38344 = EDGE_CURVE('',#38284,#38345,#38347,.T.); +#38345 = VERTEX_POINT('',#38346); +#38346 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#38347 = LINE('',#38348,#38349); +#38348 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#38349 = VECTOR('',#38350,1.); +#38350 = DIRECTION('',(1.,0.,0.)); +#38351 = ORIENTED_EDGE('',*,*,#38283,.T.); +#38352 = ORIENTED_EDGE('',*,*,#34518,.T.); +#38353 = ORIENTED_EDGE('',*,*,#38354,.F.); +#38354 = EDGE_CURVE('',#38345,#34519,#38355,.T.); +#38355 = LINE('',#38356,#38357); +#38356 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#38357 = VECTOR('',#38358,1.); +#38358 = DIRECTION('',(-0.,-0.,-1.)); +#38359 = PLANE('',#38360); +#38360 = AXIS2_PLACEMENT_3D('',#38361,#38362,#38363); +#38361 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#38362 = DIRECTION('',(0.,-1.,0.)); +#38363 = DIRECTION('',(1.,0.,0.)); +#38364 = ADVANCED_FACE('',(#38365),#38383,.T.); +#38365 = FACE_BOUND('',#38366,.F.); +#38366 = EDGE_LOOP('',(#38367,#38375,#38376,#38377)); +#38367 = ORIENTED_EDGE('',*,*,#38368,.F.); +#38368 = EDGE_CURVE('',#38323,#38369,#38371,.T.); +#38369 = VERTEX_POINT('',#38370); +#38370 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#38371 = LINE('',#38372,#38373); +#38372 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#38373 = VECTOR('',#38374,1.); +#38374 = DIRECTION('',(-1.,-0.,-0.)); +#38375 = ORIENTED_EDGE('',*,*,#38330,.T.); +#38376 = ORIENTED_EDGE('',*,*,#36342,.T.); +#38377 = ORIENTED_EDGE('',*,*,#38378,.F.); +#38378 = EDGE_CURVE('',#38369,#36335,#38379,.T.); +#38379 = LINE('',#38380,#38381); +#38380 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#38381 = VECTOR('',#38382,1.); +#38382 = DIRECTION('',(0.,0.,-1.)); +#38383 = PLANE('',#38384); +#38384 = AXIS2_PLACEMENT_3D('',#38385,#38386,#38387); +#38385 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#38386 = DIRECTION('',(-0.,-1.,-0.)); +#38387 = DIRECTION('',(1.,-0.,0.)); +#38388 = ADVANCED_FACE('',(#38389),#38407,.F.); +#38389 = FACE_BOUND('',#38390,.F.); +#38390 = EDGE_LOOP('',(#38391,#38399,#38405,#38406)); +#38391 = ORIENTED_EDGE('',*,*,#38392,.T.); +#38392 = EDGE_CURVE('',#38345,#38393,#38395,.T.); +#38393 = VERTEX_POINT('',#38394); +#38394 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#38395 = LINE('',#38396,#38397); +#38396 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#38397 = VECTOR('',#38398,1.); +#38398 = DIRECTION('',(1.,0.,0.)); +#38399 = ORIENTED_EDGE('',*,*,#38400,.T.); +#38400 = EDGE_CURVE('',#38393,#34527,#38401,.T.); +#38401 = LINE('',#38402,#38403); +#38402 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#38403 = VECTOR('',#38404,1.); +#38404 = DIRECTION('',(-0.,-0.,-1.)); +#38405 = ORIENTED_EDGE('',*,*,#34526,.F.); +#38406 = ORIENTED_EDGE('',*,*,#38354,.F.); +#38407 = PLANE('',#38408); +#38408 = AXIS2_PLACEMENT_3D('',#38409,#38410,#38411); +#38409 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#38410 = DIRECTION('',(0.,1.,0.)); +#38411 = DIRECTION('',(0.,0.,-1.)); +#38412 = ADVANCED_FACE('',(#38413),#38431,.F.); +#38413 = FACE_BOUND('',#38414,.T.); +#38414 = EDGE_LOOP('',(#38415,#38423,#38429,#38430)); +#38415 = ORIENTED_EDGE('',*,*,#38416,.T.); +#38416 = EDGE_CURVE('',#38369,#38417,#38419,.T.); +#38417 = VERTEX_POINT('',#38418); +#38418 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#38419 = LINE('',#38420,#38421); +#38420 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#38421 = VECTOR('',#38422,1.); +#38422 = DIRECTION('',(-1.,-0.,-0.)); +#38423 = ORIENTED_EDGE('',*,*,#38424,.T.); +#38424 = EDGE_CURVE('',#38417,#36327,#38425,.T.); +#38425 = LINE('',#38426,#38427); +#38426 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#38427 = VECTOR('',#38428,1.); +#38428 = DIRECTION('',(0.,0.,-1.)); +#38429 = ORIENTED_EDGE('',*,*,#36334,.F.); +#38430 = ORIENTED_EDGE('',*,*,#38378,.F.); +#38431 = PLANE('',#38432); +#38432 = AXIS2_PLACEMENT_3D('',#38433,#38434,#38435); +#38433 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#38434 = DIRECTION('',(0.,1.,0.)); +#38435 = DIRECTION('',(0.,-0.,1.)); +#38436 = ADVANCED_FACE('',(#38437),#38455,.T.); +#38437 = FACE_BOUND('',#38438,.T.); +#38438 = EDGE_LOOP('',(#38439,#38447,#38448,#38449)); +#38439 = ORIENTED_EDGE('',*,*,#38440,.F.); +#38440 = EDGE_CURVE('',#38393,#38441,#38443,.T.); +#38441 = VERTEX_POINT('',#38442); +#38442 = CARTESIAN_POINT('',(-8.15,3.54,0.4)); +#38443 = LINE('',#38444,#38445); +#38444 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#38445 = VECTOR('',#38446,1.); +#38446 = DIRECTION('',(0.,-1.,0.)); +#38447 = ORIENTED_EDGE('',*,*,#38400,.T.); +#38448 = ORIENTED_EDGE('',*,*,#34534,.T.); +#38449 = ORIENTED_EDGE('',*,*,#38450,.F.); +#38450 = EDGE_CURVE('',#38441,#34535,#38451,.T.); +#38451 = LINE('',#38452,#38453); +#38452 = CARTESIAN_POINT('',(-8.15,3.54,0.4)); +#38453 = VECTOR('',#38454,1.); +#38454 = DIRECTION('',(-0.,-0.,-1.)); +#38455 = PLANE('',#38456); +#38456 = AXIS2_PLACEMENT_3D('',#38457,#38458,#38459); +#38457 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#38458 = DIRECTION('',(-1.,0.,0.)); +#38459 = DIRECTION('',(0.,-1.,0.)); +#38460 = ADVANCED_FACE('',(#38461),#38479,.T.); +#38461 = FACE_BOUND('',#38462,.F.); +#38462 = EDGE_LOOP('',(#38463,#38471,#38472,#38473)); +#38463 = ORIENTED_EDGE('',*,*,#38464,.F.); +#38464 = EDGE_CURVE('',#38417,#38465,#38467,.T.); +#38465 = VERTEX_POINT('',#38466); +#38466 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#38467 = LINE('',#38468,#38469); +#38468 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#38469 = VECTOR('',#38470,1.); +#38470 = DIRECTION('',(-0.,-1.,-0.)); +#38471 = ORIENTED_EDGE('',*,*,#38424,.T.); +#38472 = ORIENTED_EDGE('',*,*,#36326,.T.); +#38473 = ORIENTED_EDGE('',*,*,#38474,.F.); +#38474 = EDGE_CURVE('',#38465,#36319,#38475,.T.); +#38475 = LINE('',#38476,#38477); +#38476 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#38477 = VECTOR('',#38478,1.); +#38478 = DIRECTION('',(0.,0.,-1.)); +#38479 = PLANE('',#38480); +#38480 = AXIS2_PLACEMENT_3D('',#38481,#38482,#38483); +#38481 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#38482 = DIRECTION('',(1.,0.,0.)); +#38483 = DIRECTION('',(-0.,1.,0.)); +#38484 = ADVANCED_FACE('',(#38485),#38503,.T.); +#38485 = FACE_BOUND('',#38486,.T.); +#38486 = EDGE_LOOP('',(#38487,#38495,#38496,#38497)); +#38487 = ORIENTED_EDGE('',*,*,#38488,.T.); +#38488 = EDGE_CURVE('',#38489,#38441,#38491,.T.); +#38489 = VERTEX_POINT('',#38490); +#38490 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38491 = LINE('',#38492,#38493); +#38492 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38493 = VECTOR('',#38494,1.); +#38494 = DIRECTION('',(1.,0.,0.)); +#38495 = ORIENTED_EDGE('',*,*,#38450,.T.); +#38496 = ORIENTED_EDGE('',*,*,#34542,.F.); +#38497 = ORIENTED_EDGE('',*,*,#38498,.F.); +#38498 = EDGE_CURVE('',#38489,#34543,#38499,.T.); +#38499 = LINE('',#38500,#38501); +#38500 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38501 = VECTOR('',#38502,1.); +#38502 = DIRECTION('',(-0.,-0.,-1.)); +#38503 = PLANE('',#38504); +#38504 = AXIS2_PLACEMENT_3D('',#38505,#38506,#38507); +#38505 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38506 = DIRECTION('',(0.,1.,0.)); +#38507 = DIRECTION('',(0.,0.,-1.)); +#38508 = ADVANCED_FACE('',(#38509),#38527,.T.); +#38509 = FACE_BOUND('',#38510,.F.); +#38510 = EDGE_LOOP('',(#38511,#38519,#38520,#38521)); +#38511 = ORIENTED_EDGE('',*,*,#38512,.T.); +#38512 = EDGE_CURVE('',#38513,#38465,#38515,.T.); +#38513 = VERTEX_POINT('',#38514); +#38514 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38515 = LINE('',#38516,#38517); +#38516 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38517 = VECTOR('',#38518,1.); +#38518 = DIRECTION('',(-1.,-0.,-0.)); +#38519 = ORIENTED_EDGE('',*,*,#38474,.T.); +#38520 = ORIENTED_EDGE('',*,*,#36318,.F.); +#38521 = ORIENTED_EDGE('',*,*,#38522,.F.); +#38522 = EDGE_CURVE('',#38513,#36311,#38523,.T.); +#38523 = LINE('',#38524,#38525); +#38524 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38525 = VECTOR('',#38526,1.); +#38526 = DIRECTION('',(0.,0.,-1.)); +#38527 = PLANE('',#38528); +#38528 = AXIS2_PLACEMENT_3D('',#38529,#38530,#38531); +#38529 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38530 = DIRECTION('',(0.,1.,0.)); +#38531 = DIRECTION('',(0.,-0.,1.)); +#38532 = ADVANCED_FACE('',(#38533),#38551,.T.); +#38533 = FACE_BOUND('',#38534,.T.); +#38534 = EDGE_LOOP('',(#38535,#38543,#38544,#38545)); +#38535 = ORIENTED_EDGE('',*,*,#38536,.F.); +#38536 = EDGE_CURVE('',#38489,#38537,#38539,.T.); +#38537 = VERTEX_POINT('',#38538); +#38538 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#38539 = LINE('',#38540,#38541); +#38540 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38541 = VECTOR('',#38542,1.); +#38542 = DIRECTION('',(-1.,0.,0.)); +#38543 = ORIENTED_EDGE('',*,*,#38498,.T.); +#38544 = ORIENTED_EDGE('',*,*,#34550,.T.); +#38545 = ORIENTED_EDGE('',*,*,#38546,.F.); +#38546 = EDGE_CURVE('',#38537,#34551,#38547,.T.); +#38547 = LINE('',#38548,#38549); +#38548 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#38549 = VECTOR('',#38550,1.); +#38550 = DIRECTION('',(-0.,-0.,-1.)); +#38551 = PLANE('',#38552); +#38552 = AXIS2_PLACEMENT_3D('',#38553,#38554,#38555); +#38553 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#38554 = DIRECTION('',(0.,1.,0.)); +#38555 = DIRECTION('',(-1.,0.,0.)); +#38556 = ADVANCED_FACE('',(#38557),#38575,.T.); +#38557 = FACE_BOUND('',#38558,.F.); +#38558 = EDGE_LOOP('',(#38559,#38567,#38568,#38569)); +#38559 = ORIENTED_EDGE('',*,*,#38560,.F.); +#38560 = EDGE_CURVE('',#38513,#38561,#38563,.T.); +#38561 = VERTEX_POINT('',#38562); +#38562 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#38563 = LINE('',#38564,#38565); +#38564 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38565 = VECTOR('',#38566,1.); +#38566 = DIRECTION('',(1.,0.,0.)); +#38567 = ORIENTED_EDGE('',*,*,#38522,.T.); +#38568 = ORIENTED_EDGE('',*,*,#36310,.T.); +#38569 = ORIENTED_EDGE('',*,*,#38570,.F.); +#38570 = EDGE_CURVE('',#38561,#36303,#38571,.T.); +#38571 = LINE('',#38572,#38573); +#38572 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#38573 = VECTOR('',#38574,1.); +#38574 = DIRECTION('',(0.,0.,-1.)); +#38575 = PLANE('',#38576); +#38576 = AXIS2_PLACEMENT_3D('',#38577,#38578,#38579); +#38577 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#38578 = DIRECTION('',(0.,1.,0.)); +#38579 = DIRECTION('',(-1.,0.,0.)); +#38580 = ADVANCED_FACE('',(#38581),#38606,.T.); +#38581 = FACE_BOUND('',#38582,.T.); +#38582 = EDGE_LOOP('',(#38583,#38584,#38592,#38598,#38599,#38605)); +#38583 = ORIENTED_EDGE('',*,*,#34558,.F.); +#38584 = ORIENTED_EDGE('',*,*,#38585,.F.); +#38585 = EDGE_CURVE('',#38586,#34559,#38588,.T.); +#38586 = VERTEX_POINT('',#38587); +#38587 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#38588 = LINE('',#38589,#38590); +#38589 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#38590 = VECTOR('',#38591,1.); +#38591 = DIRECTION('',(-0.,-0.,-1.)); +#38592 = ORIENTED_EDGE('',*,*,#38593,.F.); +#38593 = EDGE_CURVE('',#36770,#38586,#38594,.T.); +#38594 = LINE('',#38595,#38596); +#38595 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#38596 = VECTOR('',#38597,1.); +#38597 = DIRECTION('',(-0.,-0.,-1.)); +#38598 = ORIENTED_EDGE('',*,*,#36769,.T.); +#38599 = ORIENTED_EDGE('',*,*,#38600,.T.); +#38600 = EDGE_CURVE('',#36762,#38537,#38601,.T.); +#38601 = LINE('',#38602,#38603); +#38602 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#38603 = VECTOR('',#38604,1.); +#38604 = DIRECTION('',(-0.,-0.,-1.)); +#38605 = ORIENTED_EDGE('',*,*,#38546,.T.); +#38606 = PLANE('',#38607); +#38607 = AXIS2_PLACEMENT_3D('',#38608,#38609,#38610); +#38608 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#38609 = DIRECTION('',(-1.,0.,0.)); +#38610 = DIRECTION('',(0.,1.,0.)); +#38611 = ADVANCED_FACE('',(#38612),#38637,.T.); +#38612 = FACE_BOUND('',#38613,.T.); +#38613 = EDGE_LOOP('',(#38614,#38615,#38616,#38622,#38623,#38631)); +#38614 = ORIENTED_EDGE('',*,*,#36302,.F.); +#38615 = ORIENTED_EDGE('',*,*,#38570,.F.); +#38616 = ORIENTED_EDGE('',*,*,#38617,.F.); +#38617 = EDGE_CURVE('',#37938,#38561,#38618,.T.); +#38618 = LINE('',#38619,#38620); +#38619 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#38620 = VECTOR('',#38621,1.); +#38621 = DIRECTION('',(0.,0.,-1.)); +#38622 = ORIENTED_EDGE('',*,*,#37937,.T.); +#38623 = ORIENTED_EDGE('',*,*,#38624,.T.); +#38624 = EDGE_CURVE('',#37930,#38625,#38627,.T.); +#38625 = VERTEX_POINT('',#38626); +#38626 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#38627 = LINE('',#38628,#38629); +#38628 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#38629 = VECTOR('',#38630,1.); +#38630 = DIRECTION('',(0.,0.,-1.)); +#38631 = ORIENTED_EDGE('',*,*,#38632,.T.); +#38632 = EDGE_CURVE('',#38625,#36295,#38633,.T.); +#38633 = LINE('',#38634,#38635); +#38634 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#38635 = VECTOR('',#38636,1.); +#38636 = DIRECTION('',(0.,0.,-1.)); +#38637 = PLANE('',#38638); +#38638 = AXIS2_PLACEMENT_3D('',#38639,#38640,#38641); +#38639 = CARTESIAN_POINT('',(9.,12.75,0.)); +#38640 = DIRECTION('',(1.,0.,0.)); +#38641 = DIRECTION('',(0.,-1.,0.)); +#38642 = ADVANCED_FACE('',(#38643),#38661,.T.); +#38643 = FACE_BOUND('',#38644,.T.); +#38644 = EDGE_LOOP('',(#38645,#38653,#38654,#38655)); +#38645 = ORIENTED_EDGE('',*,*,#38646,.F.); +#38646 = EDGE_CURVE('',#38586,#38647,#38649,.T.); +#38647 = VERTEX_POINT('',#38648); +#38648 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#38649 = LINE('',#38650,#38651); +#38650 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#38651 = VECTOR('',#38652,1.); +#38652 = DIRECTION('',(1.,0.,0.)); +#38653 = ORIENTED_EDGE('',*,*,#38585,.T.); +#38654 = ORIENTED_EDGE('',*,*,#34566,.T.); +#38655 = ORIENTED_EDGE('',*,*,#38656,.F.); +#38656 = EDGE_CURVE('',#38647,#34567,#38657,.T.); +#38657 = LINE('',#38658,#38659); +#38658 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#38659 = VECTOR('',#38660,1.); +#38660 = DIRECTION('',(-0.,-0.,-1.)); +#38661 = PLANE('',#38662); +#38662 = AXIS2_PLACEMENT_3D('',#38663,#38664,#38665); +#38663 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#38664 = DIRECTION('',(0.,-1.,0.)); +#38665 = DIRECTION('',(1.,0.,0.)); +#38666 = ADVANCED_FACE('',(#38667),#38685,.T.); +#38667 = FACE_BOUND('',#38668,.F.); +#38668 = EDGE_LOOP('',(#38669,#38677,#38678,#38679)); +#38669 = ORIENTED_EDGE('',*,*,#38670,.F.); +#38670 = EDGE_CURVE('',#38625,#38671,#38673,.T.); +#38671 = VERTEX_POINT('',#38672); +#38672 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#38673 = LINE('',#38674,#38675); +#38674 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#38675 = VECTOR('',#38676,1.); +#38676 = DIRECTION('',(-1.,-0.,-0.)); +#38677 = ORIENTED_EDGE('',*,*,#38632,.T.); +#38678 = ORIENTED_EDGE('',*,*,#36294,.T.); +#38679 = ORIENTED_EDGE('',*,*,#38680,.F.); +#38680 = EDGE_CURVE('',#38671,#36287,#38681,.T.); +#38681 = LINE('',#38682,#38683); +#38682 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#38683 = VECTOR('',#38684,1.); +#38684 = DIRECTION('',(0.,0.,-1.)); +#38685 = PLANE('',#38686); +#38686 = AXIS2_PLACEMENT_3D('',#38687,#38688,#38689); +#38687 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#38688 = DIRECTION('',(-0.,-1.,-0.)); +#38689 = DIRECTION('',(1.,-0.,0.)); +#38690 = ADVANCED_FACE('',(#38691),#38709,.F.); +#38691 = FACE_BOUND('',#38692,.F.); +#38692 = EDGE_LOOP('',(#38693,#38701,#38707,#38708)); +#38693 = ORIENTED_EDGE('',*,*,#38694,.T.); +#38694 = EDGE_CURVE('',#38647,#38695,#38697,.T.); +#38695 = VERTEX_POINT('',#38696); +#38696 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#38697 = LINE('',#38698,#38699); +#38698 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#38699 = VECTOR('',#38700,1.); +#38700 = DIRECTION('',(1.,0.,0.)); +#38701 = ORIENTED_EDGE('',*,*,#38702,.T.); +#38702 = EDGE_CURVE('',#38695,#34575,#38703,.T.); +#38703 = LINE('',#38704,#38705); +#38704 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#38705 = VECTOR('',#38706,1.); +#38706 = DIRECTION('',(-0.,-0.,-1.)); +#38707 = ORIENTED_EDGE('',*,*,#34574,.F.); +#38708 = ORIENTED_EDGE('',*,*,#38656,.F.); +#38709 = PLANE('',#38710); +#38710 = AXIS2_PLACEMENT_3D('',#38711,#38712,#38713); +#38711 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#38712 = DIRECTION('',(0.,1.,0.)); +#38713 = DIRECTION('',(0.,0.,-1.)); +#38714 = ADVANCED_FACE('',(#38715),#38733,.F.); +#38715 = FACE_BOUND('',#38716,.T.); +#38716 = EDGE_LOOP('',(#38717,#38725,#38731,#38732)); +#38717 = ORIENTED_EDGE('',*,*,#38718,.T.); +#38718 = EDGE_CURVE('',#38671,#38719,#38721,.T.); +#38719 = VERTEX_POINT('',#38720); +#38720 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#38721 = LINE('',#38722,#38723); +#38722 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#38723 = VECTOR('',#38724,1.); +#38724 = DIRECTION('',(-1.,-0.,-0.)); +#38725 = ORIENTED_EDGE('',*,*,#38726,.T.); +#38726 = EDGE_CURVE('',#38719,#36279,#38727,.T.); +#38727 = LINE('',#38728,#38729); +#38728 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#38729 = VECTOR('',#38730,1.); +#38730 = DIRECTION('',(0.,0.,-1.)); +#38731 = ORIENTED_EDGE('',*,*,#36286,.F.); +#38732 = ORIENTED_EDGE('',*,*,#38680,.F.); +#38733 = PLANE('',#38734); +#38734 = AXIS2_PLACEMENT_3D('',#38735,#38736,#38737); +#38735 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#38736 = DIRECTION('',(0.,1.,0.)); +#38737 = DIRECTION('',(0.,-0.,1.)); +#38738 = ADVANCED_FACE('',(#38739),#38757,.T.); +#38739 = FACE_BOUND('',#38740,.T.); +#38740 = EDGE_LOOP('',(#38741,#38749,#38750,#38751)); +#38741 = ORIENTED_EDGE('',*,*,#38742,.F.); +#38742 = EDGE_CURVE('',#38695,#38743,#38745,.T.); +#38743 = VERTEX_POINT('',#38744); +#38744 = CARTESIAN_POINT('',(-8.15,2.27,0.4)); +#38745 = LINE('',#38746,#38747); +#38746 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#38747 = VECTOR('',#38748,1.); +#38748 = DIRECTION('',(0.,-1.,0.)); +#38749 = ORIENTED_EDGE('',*,*,#38702,.T.); +#38750 = ORIENTED_EDGE('',*,*,#34582,.T.); +#38751 = ORIENTED_EDGE('',*,*,#38752,.F.); +#38752 = EDGE_CURVE('',#38743,#34583,#38753,.T.); +#38753 = LINE('',#38754,#38755); +#38754 = CARTESIAN_POINT('',(-8.15,2.27,0.4)); +#38755 = VECTOR('',#38756,1.); +#38756 = DIRECTION('',(-0.,-0.,-1.)); +#38757 = PLANE('',#38758); +#38758 = AXIS2_PLACEMENT_3D('',#38759,#38760,#38761); +#38759 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#38760 = DIRECTION('',(-1.,0.,0.)); +#38761 = DIRECTION('',(0.,-1.,0.)); +#38762 = ADVANCED_FACE('',(#38763),#38781,.T.); +#38763 = FACE_BOUND('',#38764,.F.); +#38764 = EDGE_LOOP('',(#38765,#38773,#38774,#38775)); +#38765 = ORIENTED_EDGE('',*,*,#38766,.F.); +#38766 = EDGE_CURVE('',#38719,#38767,#38769,.T.); +#38767 = VERTEX_POINT('',#38768); +#38768 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#38769 = LINE('',#38770,#38771); +#38770 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#38771 = VECTOR('',#38772,1.); +#38772 = DIRECTION('',(-0.,-1.,-0.)); +#38773 = ORIENTED_EDGE('',*,*,#38726,.T.); +#38774 = ORIENTED_EDGE('',*,*,#36278,.T.); +#38775 = ORIENTED_EDGE('',*,*,#38776,.F.); +#38776 = EDGE_CURVE('',#38767,#36271,#38777,.T.); +#38777 = LINE('',#38778,#38779); +#38778 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#38779 = VECTOR('',#38780,1.); +#38780 = DIRECTION('',(0.,0.,-1.)); +#38781 = PLANE('',#38782); +#38782 = AXIS2_PLACEMENT_3D('',#38783,#38784,#38785); +#38783 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#38784 = DIRECTION('',(1.,0.,0.)); +#38785 = DIRECTION('',(-0.,1.,0.)); +#38786 = ADVANCED_FACE('',(#38787),#38805,.T.); +#38787 = FACE_BOUND('',#38788,.T.); +#38788 = EDGE_LOOP('',(#38789,#38797,#38798,#38799)); +#38789 = ORIENTED_EDGE('',*,*,#38790,.T.); +#38790 = EDGE_CURVE('',#38791,#38743,#38793,.T.); +#38791 = VERTEX_POINT('',#38792); +#38792 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38793 = LINE('',#38794,#38795); +#38794 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38795 = VECTOR('',#38796,1.); +#38796 = DIRECTION('',(1.,0.,0.)); +#38797 = ORIENTED_EDGE('',*,*,#38752,.T.); +#38798 = ORIENTED_EDGE('',*,*,#34590,.F.); +#38799 = ORIENTED_EDGE('',*,*,#38800,.F.); +#38800 = EDGE_CURVE('',#38791,#34591,#38801,.T.); +#38801 = LINE('',#38802,#38803); +#38802 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38803 = VECTOR('',#38804,1.); +#38804 = DIRECTION('',(-0.,-0.,-1.)); +#38805 = PLANE('',#38806); +#38806 = AXIS2_PLACEMENT_3D('',#38807,#38808,#38809); +#38807 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38808 = DIRECTION('',(0.,1.,0.)); +#38809 = DIRECTION('',(0.,0.,-1.)); +#38810 = ADVANCED_FACE('',(#38811),#38829,.T.); +#38811 = FACE_BOUND('',#38812,.F.); +#38812 = EDGE_LOOP('',(#38813,#38821,#38822,#38823)); +#38813 = ORIENTED_EDGE('',*,*,#38814,.T.); +#38814 = EDGE_CURVE('',#38815,#38767,#38817,.T.); +#38815 = VERTEX_POINT('',#38816); +#38816 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38817 = LINE('',#38818,#38819); +#38818 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38819 = VECTOR('',#38820,1.); +#38820 = DIRECTION('',(-1.,-0.,-0.)); +#38821 = ORIENTED_EDGE('',*,*,#38776,.T.); +#38822 = ORIENTED_EDGE('',*,*,#36270,.F.); +#38823 = ORIENTED_EDGE('',*,*,#38824,.F.); +#38824 = EDGE_CURVE('',#38815,#36263,#38825,.T.); +#38825 = LINE('',#38826,#38827); +#38826 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38827 = VECTOR('',#38828,1.); +#38828 = DIRECTION('',(0.,0.,-1.)); +#38829 = PLANE('',#38830); +#38830 = AXIS2_PLACEMENT_3D('',#38831,#38832,#38833); +#38831 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38832 = DIRECTION('',(0.,1.,0.)); +#38833 = DIRECTION('',(0.,-0.,1.)); +#38834 = ADVANCED_FACE('',(#38835),#38853,.T.); +#38835 = FACE_BOUND('',#38836,.T.); +#38836 = EDGE_LOOP('',(#38837,#38845,#38846,#38847)); +#38837 = ORIENTED_EDGE('',*,*,#38838,.F.); +#38838 = EDGE_CURVE('',#38791,#38839,#38841,.T.); +#38839 = VERTEX_POINT('',#38840); +#38840 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#38841 = LINE('',#38842,#38843); +#38842 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38843 = VECTOR('',#38844,1.); +#38844 = DIRECTION('',(-1.,0.,0.)); +#38845 = ORIENTED_EDGE('',*,*,#38800,.T.); +#38846 = ORIENTED_EDGE('',*,*,#34598,.T.); +#38847 = ORIENTED_EDGE('',*,*,#38848,.F.); +#38848 = EDGE_CURVE('',#38839,#34599,#38849,.T.); +#38849 = LINE('',#38850,#38851); +#38850 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#38851 = VECTOR('',#38852,1.); +#38852 = DIRECTION('',(-0.,-0.,-1.)); +#38853 = PLANE('',#38854); +#38854 = AXIS2_PLACEMENT_3D('',#38855,#38856,#38857); +#38855 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#38856 = DIRECTION('',(0.,1.,0.)); +#38857 = DIRECTION('',(-1.,0.,0.)); +#38858 = ADVANCED_FACE('',(#38859),#38877,.T.); +#38859 = FACE_BOUND('',#38860,.F.); +#38860 = EDGE_LOOP('',(#38861,#38869,#38870,#38871)); +#38861 = ORIENTED_EDGE('',*,*,#38862,.F.); +#38862 = EDGE_CURVE('',#38815,#38863,#38865,.T.); +#38863 = VERTEX_POINT('',#38864); +#38864 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#38865 = LINE('',#38866,#38867); +#38866 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38867 = VECTOR('',#38868,1.); +#38868 = DIRECTION('',(1.,0.,0.)); +#38869 = ORIENTED_EDGE('',*,*,#38824,.T.); +#38870 = ORIENTED_EDGE('',*,*,#36262,.T.); +#38871 = ORIENTED_EDGE('',*,*,#38872,.F.); +#38872 = EDGE_CURVE('',#38863,#36255,#38873,.T.); +#38873 = LINE('',#38874,#38875); +#38874 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#38875 = VECTOR('',#38876,1.); +#38876 = DIRECTION('',(0.,0.,-1.)); +#38877 = PLANE('',#38878); +#38878 = AXIS2_PLACEMENT_3D('',#38879,#38880,#38881); +#38879 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#38880 = DIRECTION('',(0.,1.,0.)); +#38881 = DIRECTION('',(-1.,0.,0.)); +#38882 = ADVANCED_FACE('',(#38883),#38908,.T.); +#38883 = FACE_BOUND('',#38884,.T.); +#38884 = EDGE_LOOP('',(#38885,#38886,#38894,#38900,#38901,#38907)); +#38885 = ORIENTED_EDGE('',*,*,#34606,.F.); +#38886 = ORIENTED_EDGE('',*,*,#38887,.F.); +#38887 = EDGE_CURVE('',#38888,#34607,#38890,.T.); +#38888 = VERTEX_POINT('',#38889); +#38889 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#38890 = LINE('',#38891,#38892); +#38891 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#38892 = VECTOR('',#38893,1.); +#38893 = DIRECTION('',(-0.,-0.,-1.)); +#38894 = ORIENTED_EDGE('',*,*,#38895,.F.); +#38895 = EDGE_CURVE('',#36802,#38888,#38896,.T.); +#38896 = LINE('',#38897,#38898); +#38897 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#38898 = VECTOR('',#38899,1.); +#38899 = DIRECTION('',(-0.,-0.,-1.)); +#38900 = ORIENTED_EDGE('',*,*,#36801,.T.); +#38901 = ORIENTED_EDGE('',*,*,#38902,.T.); +#38902 = EDGE_CURVE('',#36794,#38839,#38903,.T.); +#38903 = LINE('',#38904,#38905); +#38904 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#38905 = VECTOR('',#38906,1.); +#38906 = DIRECTION('',(-0.,-0.,-1.)); +#38907 = ORIENTED_EDGE('',*,*,#38848,.T.); +#38908 = PLANE('',#38909); +#38909 = AXIS2_PLACEMENT_3D('',#38910,#38911,#38912); +#38910 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#38911 = DIRECTION('',(-1.,0.,0.)); +#38912 = DIRECTION('',(0.,1.,0.)); +#38913 = ADVANCED_FACE('',(#38914),#38939,.T.); +#38914 = FACE_BOUND('',#38915,.T.); +#38915 = EDGE_LOOP('',(#38916,#38917,#38918,#38924,#38925,#38933)); +#38916 = ORIENTED_EDGE('',*,*,#36254,.F.); +#38917 = ORIENTED_EDGE('',*,*,#38872,.F.); +#38918 = ORIENTED_EDGE('',*,*,#38919,.F.); +#38919 = EDGE_CURVE('',#37906,#38863,#38920,.T.); +#38920 = LINE('',#38921,#38922); +#38921 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#38922 = VECTOR('',#38923,1.); +#38923 = DIRECTION('',(0.,0.,-1.)); +#38924 = ORIENTED_EDGE('',*,*,#37905,.T.); +#38925 = ORIENTED_EDGE('',*,*,#38926,.T.); +#38926 = EDGE_CURVE('',#37898,#38927,#38929,.T.); +#38927 = VERTEX_POINT('',#38928); +#38928 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#38929 = LINE('',#38930,#38931); +#38930 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#38931 = VECTOR('',#38932,1.); +#38932 = DIRECTION('',(0.,0.,-1.)); +#38933 = ORIENTED_EDGE('',*,*,#38934,.T.); +#38934 = EDGE_CURVE('',#38927,#36247,#38935,.T.); +#38935 = LINE('',#38936,#38937); +#38936 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#38937 = VECTOR('',#38938,1.); +#38938 = DIRECTION('',(0.,0.,-1.)); +#38939 = PLANE('',#38940); +#38940 = AXIS2_PLACEMENT_3D('',#38941,#38942,#38943); +#38941 = CARTESIAN_POINT('',(9.,12.75,0.)); +#38942 = DIRECTION('',(1.,0.,0.)); +#38943 = DIRECTION('',(0.,-1.,0.)); +#38944 = ADVANCED_FACE('',(#38945),#38963,.T.); +#38945 = FACE_BOUND('',#38946,.T.); +#38946 = EDGE_LOOP('',(#38947,#38955,#38956,#38957)); +#38947 = ORIENTED_EDGE('',*,*,#38948,.F.); +#38948 = EDGE_CURVE('',#38888,#38949,#38951,.T.); +#38949 = VERTEX_POINT('',#38950); +#38950 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#38951 = LINE('',#38952,#38953); +#38952 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#38953 = VECTOR('',#38954,1.); +#38954 = DIRECTION('',(1.,0.,0.)); +#38955 = ORIENTED_EDGE('',*,*,#38887,.T.); +#38956 = ORIENTED_EDGE('',*,*,#34614,.T.); +#38957 = ORIENTED_EDGE('',*,*,#38958,.F.); +#38958 = EDGE_CURVE('',#38949,#34615,#38959,.T.); +#38959 = LINE('',#38960,#38961); +#38960 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#38961 = VECTOR('',#38962,1.); +#38962 = DIRECTION('',(-0.,-0.,-1.)); +#38963 = PLANE('',#38964); +#38964 = AXIS2_PLACEMENT_3D('',#38965,#38966,#38967); +#38965 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#38966 = DIRECTION('',(0.,-1.,0.)); +#38967 = DIRECTION('',(1.,0.,0.)); +#38968 = ADVANCED_FACE('',(#38969),#38987,.T.); +#38969 = FACE_BOUND('',#38970,.F.); +#38970 = EDGE_LOOP('',(#38971,#38979,#38980,#38981)); +#38971 = ORIENTED_EDGE('',*,*,#38972,.F.); +#38972 = EDGE_CURVE('',#38927,#38973,#38975,.T.); +#38973 = VERTEX_POINT('',#38974); +#38974 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#38975 = LINE('',#38976,#38977); +#38976 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#38977 = VECTOR('',#38978,1.); +#38978 = DIRECTION('',(-1.,-0.,-0.)); +#38979 = ORIENTED_EDGE('',*,*,#38934,.T.); +#38980 = ORIENTED_EDGE('',*,*,#36246,.T.); +#38981 = ORIENTED_EDGE('',*,*,#38982,.F.); +#38982 = EDGE_CURVE('',#38973,#36239,#38983,.T.); +#38983 = LINE('',#38984,#38985); +#38984 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#38985 = VECTOR('',#38986,1.); +#38986 = DIRECTION('',(0.,0.,-1.)); +#38987 = PLANE('',#38988); +#38988 = AXIS2_PLACEMENT_3D('',#38989,#38990,#38991); +#38989 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#38990 = DIRECTION('',(-0.,-1.,-0.)); +#38991 = DIRECTION('',(1.,-0.,0.)); +#38992 = ADVANCED_FACE('',(#38993),#39011,.F.); +#38993 = FACE_BOUND('',#38994,.F.); +#38994 = EDGE_LOOP('',(#38995,#39003,#39009,#39010)); +#38995 = ORIENTED_EDGE('',*,*,#38996,.T.); +#38996 = EDGE_CURVE('',#38949,#38997,#38999,.T.); +#38997 = VERTEX_POINT('',#38998); +#38998 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#38999 = LINE('',#39000,#39001); +#39000 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#39001 = VECTOR('',#39002,1.); +#39002 = DIRECTION('',(1.,0.,0.)); +#39003 = ORIENTED_EDGE('',*,*,#39004,.T.); +#39004 = EDGE_CURVE('',#38997,#34623,#39005,.T.); +#39005 = LINE('',#39006,#39007); +#39006 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#39007 = VECTOR('',#39008,1.); +#39008 = DIRECTION('',(-0.,-0.,-1.)); +#39009 = ORIENTED_EDGE('',*,*,#34622,.F.); +#39010 = ORIENTED_EDGE('',*,*,#38958,.F.); +#39011 = PLANE('',#39012); +#39012 = AXIS2_PLACEMENT_3D('',#39013,#39014,#39015); +#39013 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#39014 = DIRECTION('',(0.,1.,0.)); +#39015 = DIRECTION('',(0.,0.,-1.)); +#39016 = ADVANCED_FACE('',(#39017),#39035,.F.); +#39017 = FACE_BOUND('',#39018,.T.); +#39018 = EDGE_LOOP('',(#39019,#39027,#39033,#39034)); +#39019 = ORIENTED_EDGE('',*,*,#39020,.T.); +#39020 = EDGE_CURVE('',#38973,#39021,#39023,.T.); +#39021 = VERTEX_POINT('',#39022); +#39022 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#39023 = LINE('',#39024,#39025); +#39024 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#39025 = VECTOR('',#39026,1.); +#39026 = DIRECTION('',(-1.,-0.,-0.)); +#39027 = ORIENTED_EDGE('',*,*,#39028,.T.); +#39028 = EDGE_CURVE('',#39021,#36231,#39029,.T.); +#39029 = LINE('',#39030,#39031); +#39030 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#39031 = VECTOR('',#39032,1.); +#39032 = DIRECTION('',(0.,0.,-1.)); +#39033 = ORIENTED_EDGE('',*,*,#36238,.F.); +#39034 = ORIENTED_EDGE('',*,*,#38982,.F.); +#39035 = PLANE('',#39036); +#39036 = AXIS2_PLACEMENT_3D('',#39037,#39038,#39039); +#39037 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#39038 = DIRECTION('',(0.,1.,0.)); +#39039 = DIRECTION('',(0.,-0.,1.)); +#39040 = ADVANCED_FACE('',(#39041),#39059,.T.); +#39041 = FACE_BOUND('',#39042,.T.); +#39042 = EDGE_LOOP('',(#39043,#39051,#39052,#39053)); +#39043 = ORIENTED_EDGE('',*,*,#39044,.F.); +#39044 = EDGE_CURVE('',#38997,#39045,#39047,.T.); +#39045 = VERTEX_POINT('',#39046); +#39046 = CARTESIAN_POINT('',(-8.15,1.,0.4)); +#39047 = LINE('',#39048,#39049); +#39048 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#39049 = VECTOR('',#39050,1.); +#39050 = DIRECTION('',(0.,-1.,0.)); +#39051 = ORIENTED_EDGE('',*,*,#39004,.T.); +#39052 = ORIENTED_EDGE('',*,*,#34630,.T.); +#39053 = ORIENTED_EDGE('',*,*,#39054,.F.); +#39054 = EDGE_CURVE('',#39045,#34631,#39055,.T.); +#39055 = LINE('',#39056,#39057); +#39056 = CARTESIAN_POINT('',(-8.15,1.,0.4)); +#39057 = VECTOR('',#39058,1.); +#39058 = DIRECTION('',(-0.,-0.,-1.)); +#39059 = PLANE('',#39060); +#39060 = AXIS2_PLACEMENT_3D('',#39061,#39062,#39063); +#39061 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#39062 = DIRECTION('',(-1.,0.,0.)); +#39063 = DIRECTION('',(0.,-1.,0.)); +#39064 = ADVANCED_FACE('',(#39065),#39083,.T.); +#39065 = FACE_BOUND('',#39066,.F.); +#39066 = EDGE_LOOP('',(#39067,#39075,#39076,#39077)); +#39067 = ORIENTED_EDGE('',*,*,#39068,.F.); +#39068 = EDGE_CURVE('',#39021,#39069,#39071,.T.); +#39069 = VERTEX_POINT('',#39070); +#39070 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#39071 = LINE('',#39072,#39073); +#39072 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#39073 = VECTOR('',#39074,1.); +#39074 = DIRECTION('',(-0.,-1.,-0.)); +#39075 = ORIENTED_EDGE('',*,*,#39028,.T.); +#39076 = ORIENTED_EDGE('',*,*,#36230,.T.); +#39077 = ORIENTED_EDGE('',*,*,#39078,.F.); +#39078 = EDGE_CURVE('',#39069,#36223,#39079,.T.); +#39079 = LINE('',#39080,#39081); +#39080 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#39081 = VECTOR('',#39082,1.); +#39082 = DIRECTION('',(0.,0.,-1.)); +#39083 = PLANE('',#39084); +#39084 = AXIS2_PLACEMENT_3D('',#39085,#39086,#39087); +#39085 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#39086 = DIRECTION('',(1.,0.,0.)); +#39087 = DIRECTION('',(-0.,1.,0.)); +#39088 = ADVANCED_FACE('',(#39089),#39107,.T.); +#39089 = FACE_BOUND('',#39090,.T.); +#39090 = EDGE_LOOP('',(#39091,#39099,#39100,#39101)); +#39091 = ORIENTED_EDGE('',*,*,#39092,.T.); +#39092 = EDGE_CURVE('',#39093,#39045,#39095,.T.); +#39093 = VERTEX_POINT('',#39094); +#39094 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39095 = LINE('',#39096,#39097); +#39096 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39097 = VECTOR('',#39098,1.); +#39098 = DIRECTION('',(1.,0.,0.)); +#39099 = ORIENTED_EDGE('',*,*,#39054,.T.); +#39100 = ORIENTED_EDGE('',*,*,#34638,.F.); +#39101 = ORIENTED_EDGE('',*,*,#39102,.F.); +#39102 = EDGE_CURVE('',#39093,#34639,#39103,.T.); +#39103 = LINE('',#39104,#39105); +#39104 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39105 = VECTOR('',#39106,1.); +#39106 = DIRECTION('',(-0.,-0.,-1.)); +#39107 = PLANE('',#39108); +#39108 = AXIS2_PLACEMENT_3D('',#39109,#39110,#39111); +#39109 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39110 = DIRECTION('',(0.,1.,0.)); +#39111 = DIRECTION('',(0.,0.,-1.)); +#39112 = ADVANCED_FACE('',(#39113),#39131,.T.); +#39113 = FACE_BOUND('',#39114,.F.); +#39114 = EDGE_LOOP('',(#39115,#39123,#39124,#39125)); +#39115 = ORIENTED_EDGE('',*,*,#39116,.T.); +#39116 = EDGE_CURVE('',#39117,#39069,#39119,.T.); +#39117 = VERTEX_POINT('',#39118); +#39118 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39119 = LINE('',#39120,#39121); +#39120 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39121 = VECTOR('',#39122,1.); +#39122 = DIRECTION('',(-1.,-0.,-0.)); +#39123 = ORIENTED_EDGE('',*,*,#39078,.T.); +#39124 = ORIENTED_EDGE('',*,*,#36222,.F.); +#39125 = ORIENTED_EDGE('',*,*,#39126,.F.); +#39126 = EDGE_CURVE('',#39117,#36215,#39127,.T.); +#39127 = LINE('',#39128,#39129); +#39128 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39129 = VECTOR('',#39130,1.); +#39130 = DIRECTION('',(0.,0.,-1.)); +#39131 = PLANE('',#39132); +#39132 = AXIS2_PLACEMENT_3D('',#39133,#39134,#39135); +#39133 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39134 = DIRECTION('',(0.,1.,0.)); +#39135 = DIRECTION('',(0.,-0.,1.)); +#39136 = ADVANCED_FACE('',(#39137),#39155,.T.); +#39137 = FACE_BOUND('',#39138,.T.); +#39138 = EDGE_LOOP('',(#39139,#39147,#39148,#39149)); +#39139 = ORIENTED_EDGE('',*,*,#39140,.F.); +#39140 = EDGE_CURVE('',#39093,#39141,#39143,.T.); +#39141 = VERTEX_POINT('',#39142); +#39142 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#39143 = LINE('',#39144,#39145); +#39144 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39145 = VECTOR('',#39146,1.); +#39146 = DIRECTION('',(-1.,0.,0.)); +#39147 = ORIENTED_EDGE('',*,*,#39102,.T.); +#39148 = ORIENTED_EDGE('',*,*,#34646,.T.); +#39149 = ORIENTED_EDGE('',*,*,#39150,.F.); +#39150 = EDGE_CURVE('',#39141,#34647,#39151,.T.); +#39151 = LINE('',#39152,#39153); +#39152 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#39153 = VECTOR('',#39154,1.); +#39154 = DIRECTION('',(-0.,-0.,-1.)); +#39155 = PLANE('',#39156); +#39156 = AXIS2_PLACEMENT_3D('',#39157,#39158,#39159); +#39157 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#39158 = DIRECTION('',(0.,1.,0.)); +#39159 = DIRECTION('',(-1.,0.,0.)); +#39160 = ADVANCED_FACE('',(#39161),#39179,.T.); +#39161 = FACE_BOUND('',#39162,.F.); +#39162 = EDGE_LOOP('',(#39163,#39171,#39172,#39173)); +#39163 = ORIENTED_EDGE('',*,*,#39164,.F.); +#39164 = EDGE_CURVE('',#39117,#39165,#39167,.T.); +#39165 = VERTEX_POINT('',#39166); +#39166 = CARTESIAN_POINT('',(9.,1.,0.4)); +#39167 = LINE('',#39168,#39169); +#39168 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39169 = VECTOR('',#39170,1.); +#39170 = DIRECTION('',(1.,0.,0.)); +#39171 = ORIENTED_EDGE('',*,*,#39126,.T.); +#39172 = ORIENTED_EDGE('',*,*,#36214,.T.); +#39173 = ORIENTED_EDGE('',*,*,#39174,.F.); +#39174 = EDGE_CURVE('',#39165,#36207,#39175,.T.); +#39175 = LINE('',#39176,#39177); +#39176 = CARTESIAN_POINT('',(9.,1.,0.4)); +#39177 = VECTOR('',#39178,1.); +#39178 = DIRECTION('',(0.,0.,-1.)); +#39179 = PLANE('',#39180); +#39180 = AXIS2_PLACEMENT_3D('',#39181,#39182,#39183); +#39181 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#39182 = DIRECTION('',(0.,1.,0.)); +#39183 = DIRECTION('',(-1.,0.,0.)); +#39184 = ADVANCED_FACE('',(#39185),#39210,.T.); +#39185 = FACE_BOUND('',#39186,.T.); +#39186 = EDGE_LOOP('',(#39187,#39188,#39196,#39202,#39203,#39209)); +#39187 = ORIENTED_EDGE('',*,*,#34654,.F.); +#39188 = ORIENTED_EDGE('',*,*,#39189,.F.); +#39189 = EDGE_CURVE('',#39190,#34655,#39192,.T.); +#39190 = VERTEX_POINT('',#39191); +#39191 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#39192 = LINE('',#39193,#39194); +#39193 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#39194 = VECTOR('',#39195,1.); +#39195 = DIRECTION('',(-0.,-0.,-1.)); +#39196 = ORIENTED_EDGE('',*,*,#39197,.F.); +#39197 = EDGE_CURVE('',#36834,#39190,#39198,.T.); +#39198 = LINE('',#39199,#39200); +#39199 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#39200 = VECTOR('',#39201,1.); +#39201 = DIRECTION('',(-0.,-0.,-1.)); +#39202 = ORIENTED_EDGE('',*,*,#36833,.T.); +#39203 = ORIENTED_EDGE('',*,*,#39204,.T.); +#39204 = EDGE_CURVE('',#36826,#39141,#39205,.T.); +#39205 = LINE('',#39206,#39207); +#39206 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#39207 = VECTOR('',#39208,1.); +#39208 = DIRECTION('',(-0.,-0.,-1.)); +#39209 = ORIENTED_EDGE('',*,*,#39150,.T.); +#39210 = PLANE('',#39211); +#39211 = AXIS2_PLACEMENT_3D('',#39212,#39213,#39214); +#39212 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#39213 = DIRECTION('',(-1.,0.,0.)); +#39214 = DIRECTION('',(0.,1.,0.)); +#39215 = ADVANCED_FACE('',(#39216),#39241,.T.); +#39216 = FACE_BOUND('',#39217,.T.); +#39217 = EDGE_LOOP('',(#39218,#39219,#39220,#39226,#39227,#39235)); +#39218 = ORIENTED_EDGE('',*,*,#36206,.F.); +#39219 = ORIENTED_EDGE('',*,*,#39174,.F.); +#39220 = ORIENTED_EDGE('',*,*,#39221,.F.); +#39221 = EDGE_CURVE('',#37874,#39165,#39222,.T.); +#39222 = LINE('',#39223,#39224); +#39223 = CARTESIAN_POINT('',(9.,1.,0.8)); +#39224 = VECTOR('',#39225,1.); +#39225 = DIRECTION('',(0.,0.,-1.)); +#39226 = ORIENTED_EDGE('',*,*,#37873,.T.); +#39227 = ORIENTED_EDGE('',*,*,#39228,.T.); +#39228 = EDGE_CURVE('',#37866,#39229,#39231,.T.); +#39229 = VERTEX_POINT('',#39230); +#39230 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#39231 = LINE('',#39232,#39233); +#39232 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#39233 = VECTOR('',#39234,1.); +#39234 = DIRECTION('',(0.,0.,-1.)); +#39235 = ORIENTED_EDGE('',*,*,#39236,.T.); +#39236 = EDGE_CURVE('',#39229,#36199,#39237,.T.); +#39237 = LINE('',#39238,#39239); +#39238 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#39239 = VECTOR('',#39240,1.); +#39240 = DIRECTION('',(0.,0.,-1.)); +#39241 = PLANE('',#39242); +#39242 = AXIS2_PLACEMENT_3D('',#39243,#39244,#39245); +#39243 = CARTESIAN_POINT('',(9.,12.75,0.)); +#39244 = DIRECTION('',(1.,0.,0.)); +#39245 = DIRECTION('',(0.,-1.,0.)); +#39246 = ADVANCED_FACE('',(#39247),#39265,.T.); +#39247 = FACE_BOUND('',#39248,.T.); +#39248 = EDGE_LOOP('',(#39249,#39257,#39258,#39259)); +#39249 = ORIENTED_EDGE('',*,*,#39250,.F.); +#39250 = EDGE_CURVE('',#39190,#39251,#39253,.T.); +#39251 = VERTEX_POINT('',#39252); +#39252 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#39253 = LINE('',#39254,#39255); +#39254 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#39255 = VECTOR('',#39256,1.); +#39256 = DIRECTION('',(1.,0.,0.)); +#39257 = ORIENTED_EDGE('',*,*,#39189,.T.); +#39258 = ORIENTED_EDGE('',*,*,#34662,.T.); +#39259 = ORIENTED_EDGE('',*,*,#39260,.F.); +#39260 = EDGE_CURVE('',#39251,#34663,#39261,.T.); +#39261 = LINE('',#39262,#39263); +#39262 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#39263 = VECTOR('',#39264,1.); +#39264 = DIRECTION('',(-0.,-0.,-1.)); +#39265 = PLANE('',#39266); +#39266 = AXIS2_PLACEMENT_3D('',#39267,#39268,#39269); +#39267 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#39268 = DIRECTION('',(0.,-1.,0.)); +#39269 = DIRECTION('',(1.,0.,0.)); +#39270 = ADVANCED_FACE('',(#39271),#39289,.T.); +#39271 = FACE_BOUND('',#39272,.F.); +#39272 = EDGE_LOOP('',(#39273,#39281,#39282,#39283)); +#39273 = ORIENTED_EDGE('',*,*,#39274,.F.); +#39274 = EDGE_CURVE('',#39229,#39275,#39277,.T.); +#39275 = VERTEX_POINT('',#39276); +#39276 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#39277 = LINE('',#39278,#39279); +#39278 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#39279 = VECTOR('',#39280,1.); +#39280 = DIRECTION('',(-1.,-0.,-0.)); +#39281 = ORIENTED_EDGE('',*,*,#39236,.T.); +#39282 = ORIENTED_EDGE('',*,*,#36198,.T.); +#39283 = ORIENTED_EDGE('',*,*,#39284,.F.); +#39284 = EDGE_CURVE('',#39275,#36191,#39285,.T.); +#39285 = LINE('',#39286,#39287); +#39286 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#39287 = VECTOR('',#39288,1.); +#39288 = DIRECTION('',(0.,0.,-1.)); +#39289 = PLANE('',#39290); +#39290 = AXIS2_PLACEMENT_3D('',#39291,#39292,#39293); +#39291 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#39292 = DIRECTION('',(-0.,-1.,-0.)); +#39293 = DIRECTION('',(1.,-0.,0.)); +#39294 = ADVANCED_FACE('',(#39295),#39313,.F.); +#39295 = FACE_BOUND('',#39296,.F.); +#39296 = EDGE_LOOP('',(#39297,#39305,#39311,#39312)); +#39297 = ORIENTED_EDGE('',*,*,#39298,.T.); +#39298 = EDGE_CURVE('',#39251,#39299,#39301,.T.); +#39299 = VERTEX_POINT('',#39300); +#39300 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#39301 = LINE('',#39302,#39303); +#39302 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#39303 = VECTOR('',#39304,1.); +#39304 = DIRECTION('',(1.,0.,0.)); +#39305 = ORIENTED_EDGE('',*,*,#39306,.T.); +#39306 = EDGE_CURVE('',#39299,#34671,#39307,.T.); +#39307 = LINE('',#39308,#39309); +#39308 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#39309 = VECTOR('',#39310,1.); +#39310 = DIRECTION('',(-0.,-0.,-1.)); +#39311 = ORIENTED_EDGE('',*,*,#34670,.F.); +#39312 = ORIENTED_EDGE('',*,*,#39260,.F.); +#39313 = PLANE('',#39314); +#39314 = AXIS2_PLACEMENT_3D('',#39315,#39316,#39317); +#39315 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#39316 = DIRECTION('',(0.,1.,0.)); +#39317 = DIRECTION('',(0.,0.,-1.)); +#39318 = ADVANCED_FACE('',(#39319),#39337,.F.); +#39319 = FACE_BOUND('',#39320,.T.); +#39320 = EDGE_LOOP('',(#39321,#39329,#39335,#39336)); +#39321 = ORIENTED_EDGE('',*,*,#39322,.T.); +#39322 = EDGE_CURVE('',#39275,#39323,#39325,.T.); +#39323 = VERTEX_POINT('',#39324); +#39324 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#39325 = LINE('',#39326,#39327); +#39326 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#39327 = VECTOR('',#39328,1.); +#39328 = DIRECTION('',(-1.,-0.,-0.)); +#39329 = ORIENTED_EDGE('',*,*,#39330,.T.); +#39330 = EDGE_CURVE('',#39323,#36183,#39331,.T.); +#39331 = LINE('',#39332,#39333); +#39332 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#39333 = VECTOR('',#39334,1.); +#39334 = DIRECTION('',(0.,0.,-1.)); +#39335 = ORIENTED_EDGE('',*,*,#36190,.F.); +#39336 = ORIENTED_EDGE('',*,*,#39284,.F.); +#39337 = PLANE('',#39338); +#39338 = AXIS2_PLACEMENT_3D('',#39339,#39340,#39341); +#39339 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#39340 = DIRECTION('',(0.,1.,0.)); +#39341 = DIRECTION('',(0.,-0.,1.)); +#39342 = ADVANCED_FACE('',(#39343),#39361,.T.); +#39343 = FACE_BOUND('',#39344,.T.); +#39344 = EDGE_LOOP('',(#39345,#39353,#39354,#39355)); +#39345 = ORIENTED_EDGE('',*,*,#39346,.F.); +#39346 = EDGE_CURVE('',#39299,#39347,#39349,.T.); +#39347 = VERTEX_POINT('',#39348); +#39348 = CARTESIAN_POINT('',(-8.15,-0.27,0.4)); +#39349 = LINE('',#39350,#39351); +#39350 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#39351 = VECTOR('',#39352,1.); +#39352 = DIRECTION('',(0.,-1.,0.)); +#39353 = ORIENTED_EDGE('',*,*,#39306,.T.); +#39354 = ORIENTED_EDGE('',*,*,#34678,.T.); +#39355 = ORIENTED_EDGE('',*,*,#39356,.F.); +#39356 = EDGE_CURVE('',#39347,#34679,#39357,.T.); +#39357 = LINE('',#39358,#39359); +#39358 = CARTESIAN_POINT('',(-8.15,-0.27,0.4)); +#39359 = VECTOR('',#39360,1.); +#39360 = DIRECTION('',(-0.,-0.,-1.)); +#39361 = PLANE('',#39362); +#39362 = AXIS2_PLACEMENT_3D('',#39363,#39364,#39365); +#39363 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#39364 = DIRECTION('',(-1.,0.,0.)); +#39365 = DIRECTION('',(0.,-1.,0.)); +#39366 = ADVANCED_FACE('',(#39367),#39385,.T.); +#39367 = FACE_BOUND('',#39368,.F.); +#39368 = EDGE_LOOP('',(#39369,#39377,#39378,#39379)); +#39369 = ORIENTED_EDGE('',*,*,#39370,.F.); +#39370 = EDGE_CURVE('',#39323,#39371,#39373,.T.); +#39371 = VERTEX_POINT('',#39372); +#39372 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#39373 = LINE('',#39374,#39375); +#39374 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#39375 = VECTOR('',#39376,1.); +#39376 = DIRECTION('',(-0.,-1.,-0.)); +#39377 = ORIENTED_EDGE('',*,*,#39330,.T.); +#39378 = ORIENTED_EDGE('',*,*,#36182,.T.); +#39379 = ORIENTED_EDGE('',*,*,#39380,.F.); +#39380 = EDGE_CURVE('',#39371,#36175,#39381,.T.); +#39381 = LINE('',#39382,#39383); +#39382 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#39383 = VECTOR('',#39384,1.); +#39384 = DIRECTION('',(0.,0.,-1.)); +#39385 = PLANE('',#39386); +#39386 = AXIS2_PLACEMENT_3D('',#39387,#39388,#39389); +#39387 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#39388 = DIRECTION('',(1.,0.,0.)); +#39389 = DIRECTION('',(-0.,1.,0.)); +#39390 = ADVANCED_FACE('',(#39391),#39409,.T.); +#39391 = FACE_BOUND('',#39392,.T.); +#39392 = EDGE_LOOP('',(#39393,#39401,#39402,#39403)); +#39393 = ORIENTED_EDGE('',*,*,#39394,.T.); +#39394 = EDGE_CURVE('',#39395,#39347,#39397,.T.); +#39395 = VERTEX_POINT('',#39396); +#39396 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39397 = LINE('',#39398,#39399); +#39398 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39399 = VECTOR('',#39400,1.); +#39400 = DIRECTION('',(1.,0.,0.)); +#39401 = ORIENTED_EDGE('',*,*,#39356,.T.); +#39402 = ORIENTED_EDGE('',*,*,#34686,.F.); +#39403 = ORIENTED_EDGE('',*,*,#39404,.F.); +#39404 = EDGE_CURVE('',#39395,#34687,#39405,.T.); +#39405 = LINE('',#39406,#39407); +#39406 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39407 = VECTOR('',#39408,1.); +#39408 = DIRECTION('',(-0.,-0.,-1.)); +#39409 = PLANE('',#39410); +#39410 = AXIS2_PLACEMENT_3D('',#39411,#39412,#39413); +#39411 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39412 = DIRECTION('',(0.,1.,0.)); +#39413 = DIRECTION('',(0.,0.,-1.)); +#39414 = ADVANCED_FACE('',(#39415),#39433,.T.); +#39415 = FACE_BOUND('',#39416,.F.); +#39416 = EDGE_LOOP('',(#39417,#39425,#39426,#39427)); +#39417 = ORIENTED_EDGE('',*,*,#39418,.T.); +#39418 = EDGE_CURVE('',#39419,#39371,#39421,.T.); +#39419 = VERTEX_POINT('',#39420); +#39420 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39421 = LINE('',#39422,#39423); +#39422 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39423 = VECTOR('',#39424,1.); +#39424 = DIRECTION('',(-1.,-0.,-0.)); +#39425 = ORIENTED_EDGE('',*,*,#39380,.T.); +#39426 = ORIENTED_EDGE('',*,*,#36174,.F.); +#39427 = ORIENTED_EDGE('',*,*,#39428,.F.); +#39428 = EDGE_CURVE('',#39419,#36167,#39429,.T.); +#39429 = LINE('',#39430,#39431); +#39430 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39431 = VECTOR('',#39432,1.); +#39432 = DIRECTION('',(0.,0.,-1.)); +#39433 = PLANE('',#39434); +#39434 = AXIS2_PLACEMENT_3D('',#39435,#39436,#39437); +#39435 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39436 = DIRECTION('',(0.,1.,0.)); +#39437 = DIRECTION('',(0.,-0.,1.)); +#39438 = ADVANCED_FACE('',(#39439),#39457,.T.); +#39439 = FACE_BOUND('',#39440,.T.); +#39440 = EDGE_LOOP('',(#39441,#39449,#39450,#39451)); +#39441 = ORIENTED_EDGE('',*,*,#39442,.F.); +#39442 = EDGE_CURVE('',#39395,#39443,#39445,.T.); +#39443 = VERTEX_POINT('',#39444); +#39444 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#39445 = LINE('',#39446,#39447); +#39446 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39447 = VECTOR('',#39448,1.); +#39448 = DIRECTION('',(-1.,0.,0.)); +#39449 = ORIENTED_EDGE('',*,*,#39404,.T.); +#39450 = ORIENTED_EDGE('',*,*,#34694,.T.); +#39451 = ORIENTED_EDGE('',*,*,#39452,.F.); +#39452 = EDGE_CURVE('',#39443,#34695,#39453,.T.); +#39453 = LINE('',#39454,#39455); +#39454 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#39455 = VECTOR('',#39456,1.); +#39456 = DIRECTION('',(-0.,-0.,-1.)); +#39457 = PLANE('',#39458); +#39458 = AXIS2_PLACEMENT_3D('',#39459,#39460,#39461); +#39459 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#39460 = DIRECTION('',(0.,1.,0.)); +#39461 = DIRECTION('',(-1.,0.,0.)); +#39462 = ADVANCED_FACE('',(#39463),#39481,.T.); +#39463 = FACE_BOUND('',#39464,.F.); +#39464 = EDGE_LOOP('',(#39465,#39473,#39474,#39475)); +#39465 = ORIENTED_EDGE('',*,*,#39466,.F.); +#39466 = EDGE_CURVE('',#39419,#39467,#39469,.T.); +#39467 = VERTEX_POINT('',#39468); +#39468 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#39469 = LINE('',#39470,#39471); +#39470 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39471 = VECTOR('',#39472,1.); +#39472 = DIRECTION('',(1.,0.,0.)); +#39473 = ORIENTED_EDGE('',*,*,#39428,.T.); +#39474 = ORIENTED_EDGE('',*,*,#36166,.T.); +#39475 = ORIENTED_EDGE('',*,*,#39476,.F.); +#39476 = EDGE_CURVE('',#39467,#36159,#39477,.T.); +#39477 = LINE('',#39478,#39479); +#39478 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#39479 = VECTOR('',#39480,1.); +#39480 = DIRECTION('',(0.,0.,-1.)); +#39481 = PLANE('',#39482); +#39482 = AXIS2_PLACEMENT_3D('',#39483,#39484,#39485); +#39483 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#39484 = DIRECTION('',(0.,1.,0.)); +#39485 = DIRECTION('',(-1.,0.,0.)); +#39486 = ADVANCED_FACE('',(#39487),#39512,.T.); +#39487 = FACE_BOUND('',#39488,.T.); +#39488 = EDGE_LOOP('',(#39489,#39490,#39498,#39504,#39505,#39511)); +#39489 = ORIENTED_EDGE('',*,*,#34702,.F.); +#39490 = ORIENTED_EDGE('',*,*,#39491,.F.); +#39491 = EDGE_CURVE('',#39492,#34703,#39494,.T.); +#39492 = VERTEX_POINT('',#39493); +#39493 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#39494 = LINE('',#39495,#39496); +#39495 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#39496 = VECTOR('',#39497,1.); +#39497 = DIRECTION('',(-0.,-0.,-1.)); +#39498 = ORIENTED_EDGE('',*,*,#39499,.F.); +#39499 = EDGE_CURVE('',#36866,#39492,#39500,.T.); +#39500 = LINE('',#39501,#39502); +#39501 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#39502 = VECTOR('',#39503,1.); +#39503 = DIRECTION('',(-0.,-0.,-1.)); +#39504 = ORIENTED_EDGE('',*,*,#36865,.T.); +#39505 = ORIENTED_EDGE('',*,*,#39506,.T.); +#39506 = EDGE_CURVE('',#36858,#39443,#39507,.T.); +#39507 = LINE('',#39508,#39509); +#39508 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#39509 = VECTOR('',#39510,1.); +#39510 = DIRECTION('',(-0.,-0.,-1.)); +#39511 = ORIENTED_EDGE('',*,*,#39452,.T.); +#39512 = PLANE('',#39513); +#39513 = AXIS2_PLACEMENT_3D('',#39514,#39515,#39516); +#39514 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#39515 = DIRECTION('',(-1.,0.,0.)); +#39516 = DIRECTION('',(0.,1.,0.)); +#39517 = ADVANCED_FACE('',(#39518),#39543,.T.); +#39518 = FACE_BOUND('',#39519,.T.); +#39519 = EDGE_LOOP('',(#39520,#39521,#39522,#39528,#39529,#39537)); +#39520 = ORIENTED_EDGE('',*,*,#36158,.F.); +#39521 = ORIENTED_EDGE('',*,*,#39476,.F.); +#39522 = ORIENTED_EDGE('',*,*,#39523,.F.); +#39523 = EDGE_CURVE('',#37842,#39467,#39524,.T.); +#39524 = LINE('',#39525,#39526); +#39525 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#39526 = VECTOR('',#39527,1.); +#39527 = DIRECTION('',(0.,0.,-1.)); +#39528 = ORIENTED_EDGE('',*,*,#37841,.T.); +#39529 = ORIENTED_EDGE('',*,*,#39530,.T.); +#39530 = EDGE_CURVE('',#37834,#39531,#39533,.T.); +#39531 = VERTEX_POINT('',#39532); +#39532 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#39533 = LINE('',#39534,#39535); +#39534 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#39535 = VECTOR('',#39536,1.); +#39536 = DIRECTION('',(0.,0.,-1.)); +#39537 = ORIENTED_EDGE('',*,*,#39538,.T.); +#39538 = EDGE_CURVE('',#39531,#36151,#39539,.T.); +#39539 = LINE('',#39540,#39541); +#39540 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#39541 = VECTOR('',#39542,1.); +#39542 = DIRECTION('',(0.,0.,-1.)); +#39543 = PLANE('',#39544); +#39544 = AXIS2_PLACEMENT_3D('',#39545,#39546,#39547); +#39545 = CARTESIAN_POINT('',(9.,12.75,0.)); +#39546 = DIRECTION('',(1.,0.,0.)); +#39547 = DIRECTION('',(0.,-1.,0.)); +#39548 = ADVANCED_FACE('',(#39549),#39567,.T.); +#39549 = FACE_BOUND('',#39550,.T.); +#39550 = EDGE_LOOP('',(#39551,#39559,#39560,#39561)); +#39551 = ORIENTED_EDGE('',*,*,#39552,.F.); +#39552 = EDGE_CURVE('',#39492,#39553,#39555,.T.); +#39553 = VERTEX_POINT('',#39554); +#39554 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#39555 = LINE('',#39556,#39557); +#39556 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#39557 = VECTOR('',#39558,1.); +#39558 = DIRECTION('',(1.,0.,0.)); +#39559 = ORIENTED_EDGE('',*,*,#39491,.T.); +#39560 = ORIENTED_EDGE('',*,*,#34710,.T.); +#39561 = ORIENTED_EDGE('',*,*,#39562,.F.); +#39562 = EDGE_CURVE('',#39553,#34711,#39563,.T.); +#39563 = LINE('',#39564,#39565); +#39564 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#39565 = VECTOR('',#39566,1.); +#39566 = DIRECTION('',(-0.,-0.,-1.)); +#39567 = PLANE('',#39568); +#39568 = AXIS2_PLACEMENT_3D('',#39569,#39570,#39571); +#39569 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#39570 = DIRECTION('',(0.,-1.,0.)); +#39571 = DIRECTION('',(1.,0.,0.)); +#39572 = ADVANCED_FACE('',(#39573),#39591,.T.); +#39573 = FACE_BOUND('',#39574,.F.); +#39574 = EDGE_LOOP('',(#39575,#39583,#39584,#39585)); +#39575 = ORIENTED_EDGE('',*,*,#39576,.F.); +#39576 = EDGE_CURVE('',#39531,#39577,#39579,.T.); +#39577 = VERTEX_POINT('',#39578); +#39578 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#39579 = LINE('',#39580,#39581); +#39580 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#39581 = VECTOR('',#39582,1.); +#39582 = DIRECTION('',(-1.,-0.,-0.)); +#39583 = ORIENTED_EDGE('',*,*,#39538,.T.); +#39584 = ORIENTED_EDGE('',*,*,#36150,.T.); +#39585 = ORIENTED_EDGE('',*,*,#39586,.F.); +#39586 = EDGE_CURVE('',#39577,#36143,#39587,.T.); +#39587 = LINE('',#39588,#39589); +#39588 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#39589 = VECTOR('',#39590,1.); +#39590 = DIRECTION('',(0.,0.,-1.)); +#39591 = PLANE('',#39592); +#39592 = AXIS2_PLACEMENT_3D('',#39593,#39594,#39595); +#39593 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#39594 = DIRECTION('',(-0.,-1.,-0.)); +#39595 = DIRECTION('',(1.,-0.,0.)); +#39596 = ADVANCED_FACE('',(#39597),#39615,.F.); +#39597 = FACE_BOUND('',#39598,.F.); +#39598 = EDGE_LOOP('',(#39599,#39607,#39613,#39614)); +#39599 = ORIENTED_EDGE('',*,*,#39600,.T.); +#39600 = EDGE_CURVE('',#39553,#39601,#39603,.T.); +#39601 = VERTEX_POINT('',#39602); +#39602 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#39603 = LINE('',#39604,#39605); +#39604 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#39605 = VECTOR('',#39606,1.); +#39606 = DIRECTION('',(1.,0.,0.)); +#39607 = ORIENTED_EDGE('',*,*,#39608,.T.); +#39608 = EDGE_CURVE('',#39601,#34719,#39609,.T.); +#39609 = LINE('',#39610,#39611); +#39610 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#39611 = VECTOR('',#39612,1.); +#39612 = DIRECTION('',(-0.,-0.,-1.)); +#39613 = ORIENTED_EDGE('',*,*,#34718,.F.); +#39614 = ORIENTED_EDGE('',*,*,#39562,.F.); +#39615 = PLANE('',#39616); +#39616 = AXIS2_PLACEMENT_3D('',#39617,#39618,#39619); +#39617 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#39618 = DIRECTION('',(0.,1.,0.)); +#39619 = DIRECTION('',(0.,0.,-1.)); +#39620 = ADVANCED_FACE('',(#39621),#39639,.F.); +#39621 = FACE_BOUND('',#39622,.T.); +#39622 = EDGE_LOOP('',(#39623,#39631,#39637,#39638)); +#39623 = ORIENTED_EDGE('',*,*,#39624,.T.); +#39624 = EDGE_CURVE('',#39577,#39625,#39627,.T.); +#39625 = VERTEX_POINT('',#39626); +#39626 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#39627 = LINE('',#39628,#39629); +#39628 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#39629 = VECTOR('',#39630,1.); +#39630 = DIRECTION('',(-1.,-0.,-0.)); +#39631 = ORIENTED_EDGE('',*,*,#39632,.T.); +#39632 = EDGE_CURVE('',#39625,#36135,#39633,.T.); +#39633 = LINE('',#39634,#39635); +#39634 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#39635 = VECTOR('',#39636,1.); +#39636 = DIRECTION('',(0.,0.,-1.)); +#39637 = ORIENTED_EDGE('',*,*,#36142,.F.); +#39638 = ORIENTED_EDGE('',*,*,#39586,.F.); +#39639 = PLANE('',#39640); +#39640 = AXIS2_PLACEMENT_3D('',#39641,#39642,#39643); +#39641 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#39642 = DIRECTION('',(0.,1.,0.)); +#39643 = DIRECTION('',(0.,-0.,1.)); +#39644 = ADVANCED_FACE('',(#39645),#39663,.T.); +#39645 = FACE_BOUND('',#39646,.T.); +#39646 = EDGE_LOOP('',(#39647,#39655,#39656,#39657)); +#39647 = ORIENTED_EDGE('',*,*,#39648,.F.); +#39648 = EDGE_CURVE('',#39601,#39649,#39651,.T.); +#39649 = VERTEX_POINT('',#39650); +#39650 = CARTESIAN_POINT('',(-8.15,-1.54,0.4)); +#39651 = LINE('',#39652,#39653); +#39652 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#39653 = VECTOR('',#39654,1.); +#39654 = DIRECTION('',(0.,-1.,0.)); +#39655 = ORIENTED_EDGE('',*,*,#39608,.T.); +#39656 = ORIENTED_EDGE('',*,*,#34726,.T.); +#39657 = ORIENTED_EDGE('',*,*,#39658,.F.); +#39658 = EDGE_CURVE('',#39649,#34727,#39659,.T.); +#39659 = LINE('',#39660,#39661); +#39660 = CARTESIAN_POINT('',(-8.15,-1.54,0.4)); +#39661 = VECTOR('',#39662,1.); +#39662 = DIRECTION('',(-0.,-0.,-1.)); +#39663 = PLANE('',#39664); +#39664 = AXIS2_PLACEMENT_3D('',#39665,#39666,#39667); +#39665 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#39666 = DIRECTION('',(-1.,0.,0.)); +#39667 = DIRECTION('',(0.,-1.,0.)); +#39668 = ADVANCED_FACE('',(#39669),#39687,.T.); +#39669 = FACE_BOUND('',#39670,.F.); +#39670 = EDGE_LOOP('',(#39671,#39679,#39680,#39681)); +#39671 = ORIENTED_EDGE('',*,*,#39672,.F.); +#39672 = EDGE_CURVE('',#39625,#39673,#39675,.T.); +#39673 = VERTEX_POINT('',#39674); +#39674 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#39675 = LINE('',#39676,#39677); +#39676 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#39677 = VECTOR('',#39678,1.); +#39678 = DIRECTION('',(-0.,-1.,-0.)); +#39679 = ORIENTED_EDGE('',*,*,#39632,.T.); +#39680 = ORIENTED_EDGE('',*,*,#36134,.T.); +#39681 = ORIENTED_EDGE('',*,*,#39682,.F.); +#39682 = EDGE_CURVE('',#39673,#36127,#39683,.T.); +#39683 = LINE('',#39684,#39685); +#39684 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#39685 = VECTOR('',#39686,1.); +#39686 = DIRECTION('',(0.,0.,-1.)); +#39687 = PLANE('',#39688); +#39688 = AXIS2_PLACEMENT_3D('',#39689,#39690,#39691); +#39689 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#39690 = DIRECTION('',(1.,0.,0.)); +#39691 = DIRECTION('',(-0.,1.,0.)); +#39692 = ADVANCED_FACE('',(#39693),#39711,.T.); +#39693 = FACE_BOUND('',#39694,.T.); +#39694 = EDGE_LOOP('',(#39695,#39703,#39704,#39705)); +#39695 = ORIENTED_EDGE('',*,*,#39696,.T.); +#39696 = EDGE_CURVE('',#39697,#39649,#39699,.T.); +#39697 = VERTEX_POINT('',#39698); +#39698 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39699 = LINE('',#39700,#39701); +#39700 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39701 = VECTOR('',#39702,1.); +#39702 = DIRECTION('',(1.,0.,0.)); +#39703 = ORIENTED_EDGE('',*,*,#39658,.T.); +#39704 = ORIENTED_EDGE('',*,*,#34734,.F.); +#39705 = ORIENTED_EDGE('',*,*,#39706,.F.); +#39706 = EDGE_CURVE('',#39697,#34735,#39707,.T.); +#39707 = LINE('',#39708,#39709); +#39708 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39709 = VECTOR('',#39710,1.); +#39710 = DIRECTION('',(-0.,-0.,-1.)); +#39711 = PLANE('',#39712); +#39712 = AXIS2_PLACEMENT_3D('',#39713,#39714,#39715); +#39713 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39714 = DIRECTION('',(0.,1.,0.)); +#39715 = DIRECTION('',(0.,0.,-1.)); +#39716 = ADVANCED_FACE('',(#39717),#39735,.T.); +#39717 = FACE_BOUND('',#39718,.F.); +#39718 = EDGE_LOOP('',(#39719,#39727,#39728,#39729)); +#39719 = ORIENTED_EDGE('',*,*,#39720,.T.); +#39720 = EDGE_CURVE('',#39721,#39673,#39723,.T.); +#39721 = VERTEX_POINT('',#39722); +#39722 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39723 = LINE('',#39724,#39725); +#39724 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39725 = VECTOR('',#39726,1.); +#39726 = DIRECTION('',(-1.,-0.,-0.)); +#39727 = ORIENTED_EDGE('',*,*,#39682,.T.); +#39728 = ORIENTED_EDGE('',*,*,#36126,.F.); +#39729 = ORIENTED_EDGE('',*,*,#39730,.F.); +#39730 = EDGE_CURVE('',#39721,#36119,#39731,.T.); +#39731 = LINE('',#39732,#39733); +#39732 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39733 = VECTOR('',#39734,1.); +#39734 = DIRECTION('',(0.,0.,-1.)); +#39735 = PLANE('',#39736); +#39736 = AXIS2_PLACEMENT_3D('',#39737,#39738,#39739); +#39737 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39738 = DIRECTION('',(0.,1.,0.)); +#39739 = DIRECTION('',(0.,-0.,1.)); +#39740 = ADVANCED_FACE('',(#39741),#39759,.T.); +#39741 = FACE_BOUND('',#39742,.T.); +#39742 = EDGE_LOOP('',(#39743,#39751,#39752,#39753)); +#39743 = ORIENTED_EDGE('',*,*,#39744,.F.); +#39744 = EDGE_CURVE('',#39697,#39745,#39747,.T.); +#39745 = VERTEX_POINT('',#39746); +#39746 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#39747 = LINE('',#39748,#39749); +#39748 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39749 = VECTOR('',#39750,1.); +#39750 = DIRECTION('',(-1.,0.,0.)); +#39751 = ORIENTED_EDGE('',*,*,#39706,.T.); +#39752 = ORIENTED_EDGE('',*,*,#34742,.T.); +#39753 = ORIENTED_EDGE('',*,*,#39754,.F.); +#39754 = EDGE_CURVE('',#39745,#34743,#39755,.T.); +#39755 = LINE('',#39756,#39757); +#39756 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#39757 = VECTOR('',#39758,1.); +#39758 = DIRECTION('',(-0.,-0.,-1.)); +#39759 = PLANE('',#39760); +#39760 = AXIS2_PLACEMENT_3D('',#39761,#39762,#39763); +#39761 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#39762 = DIRECTION('',(0.,1.,0.)); +#39763 = DIRECTION('',(-1.,0.,0.)); +#39764 = ADVANCED_FACE('',(#39765),#39783,.T.); +#39765 = FACE_BOUND('',#39766,.F.); +#39766 = EDGE_LOOP('',(#39767,#39775,#39776,#39777)); +#39767 = ORIENTED_EDGE('',*,*,#39768,.F.); +#39768 = EDGE_CURVE('',#39721,#39769,#39771,.T.); +#39769 = VERTEX_POINT('',#39770); +#39770 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#39771 = LINE('',#39772,#39773); +#39772 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39773 = VECTOR('',#39774,1.); +#39774 = DIRECTION('',(1.,0.,0.)); +#39775 = ORIENTED_EDGE('',*,*,#39730,.T.); +#39776 = ORIENTED_EDGE('',*,*,#36118,.T.); +#39777 = ORIENTED_EDGE('',*,*,#39778,.F.); +#39778 = EDGE_CURVE('',#39769,#36111,#39779,.T.); +#39779 = LINE('',#39780,#39781); +#39780 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#39781 = VECTOR('',#39782,1.); +#39782 = DIRECTION('',(0.,0.,-1.)); +#39783 = PLANE('',#39784); +#39784 = AXIS2_PLACEMENT_3D('',#39785,#39786,#39787); +#39785 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#39786 = DIRECTION('',(0.,1.,0.)); +#39787 = DIRECTION('',(-1.,0.,0.)); +#39788 = ADVANCED_FACE('',(#39789),#39814,.T.); +#39789 = FACE_BOUND('',#39790,.T.); +#39790 = EDGE_LOOP('',(#39791,#39792,#39800,#39806,#39807,#39813)); +#39791 = ORIENTED_EDGE('',*,*,#34750,.F.); +#39792 = ORIENTED_EDGE('',*,*,#39793,.F.); +#39793 = EDGE_CURVE('',#39794,#34751,#39796,.T.); +#39794 = VERTEX_POINT('',#39795); +#39795 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#39796 = LINE('',#39797,#39798); +#39797 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#39798 = VECTOR('',#39799,1.); +#39799 = DIRECTION('',(-0.,-0.,-1.)); +#39800 = ORIENTED_EDGE('',*,*,#39801,.F.); +#39801 = EDGE_CURVE('',#36898,#39794,#39802,.T.); +#39802 = LINE('',#39803,#39804); +#39803 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#39804 = VECTOR('',#39805,1.); +#39805 = DIRECTION('',(-0.,-0.,-1.)); +#39806 = ORIENTED_EDGE('',*,*,#36897,.T.); +#39807 = ORIENTED_EDGE('',*,*,#39808,.T.); +#39808 = EDGE_CURVE('',#36890,#39745,#39809,.T.); +#39809 = LINE('',#39810,#39811); +#39810 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#39811 = VECTOR('',#39812,1.); +#39812 = DIRECTION('',(-0.,-0.,-1.)); +#39813 = ORIENTED_EDGE('',*,*,#39754,.T.); +#39814 = PLANE('',#39815); +#39815 = AXIS2_PLACEMENT_3D('',#39816,#39817,#39818); +#39816 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#39817 = DIRECTION('',(-1.,0.,0.)); +#39818 = DIRECTION('',(0.,1.,0.)); +#39819 = ADVANCED_FACE('',(#39820),#39845,.T.); +#39820 = FACE_BOUND('',#39821,.T.); +#39821 = EDGE_LOOP('',(#39822,#39823,#39824,#39830,#39831,#39839)); +#39822 = ORIENTED_EDGE('',*,*,#36110,.F.); +#39823 = ORIENTED_EDGE('',*,*,#39778,.F.); +#39824 = ORIENTED_EDGE('',*,*,#39825,.F.); +#39825 = EDGE_CURVE('',#37810,#39769,#39826,.T.); +#39826 = LINE('',#39827,#39828); +#39827 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#39828 = VECTOR('',#39829,1.); +#39829 = DIRECTION('',(0.,0.,-1.)); +#39830 = ORIENTED_EDGE('',*,*,#37809,.T.); +#39831 = ORIENTED_EDGE('',*,*,#39832,.T.); +#39832 = EDGE_CURVE('',#37802,#39833,#39835,.T.); +#39833 = VERTEX_POINT('',#39834); +#39834 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#39835 = LINE('',#39836,#39837); +#39836 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#39837 = VECTOR('',#39838,1.); +#39838 = DIRECTION('',(0.,0.,-1.)); +#39839 = ORIENTED_EDGE('',*,*,#39840,.T.); +#39840 = EDGE_CURVE('',#39833,#36103,#39841,.T.); +#39841 = LINE('',#39842,#39843); +#39842 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#39843 = VECTOR('',#39844,1.); +#39844 = DIRECTION('',(0.,0.,-1.)); +#39845 = PLANE('',#39846); +#39846 = AXIS2_PLACEMENT_3D('',#39847,#39848,#39849); +#39847 = CARTESIAN_POINT('',(9.,12.75,0.)); +#39848 = DIRECTION('',(1.,0.,0.)); +#39849 = DIRECTION('',(0.,-1.,0.)); +#39850 = ADVANCED_FACE('',(#39851),#39869,.T.); +#39851 = FACE_BOUND('',#39852,.T.); +#39852 = EDGE_LOOP('',(#39853,#39861,#39862,#39863)); +#39853 = ORIENTED_EDGE('',*,*,#39854,.F.); +#39854 = EDGE_CURVE('',#39794,#39855,#39857,.T.); +#39855 = VERTEX_POINT('',#39856); +#39856 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#39857 = LINE('',#39858,#39859); +#39858 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#39859 = VECTOR('',#39860,1.); +#39860 = DIRECTION('',(1.,0.,0.)); +#39861 = ORIENTED_EDGE('',*,*,#39793,.T.); +#39862 = ORIENTED_EDGE('',*,*,#34758,.T.); +#39863 = ORIENTED_EDGE('',*,*,#39864,.F.); +#39864 = EDGE_CURVE('',#39855,#34759,#39865,.T.); +#39865 = LINE('',#39866,#39867); +#39866 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#39867 = VECTOR('',#39868,1.); +#39868 = DIRECTION('',(-0.,-0.,-1.)); +#39869 = PLANE('',#39870); +#39870 = AXIS2_PLACEMENT_3D('',#39871,#39872,#39873); +#39871 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#39872 = DIRECTION('',(0.,-1.,0.)); +#39873 = DIRECTION('',(1.,0.,0.)); +#39874 = ADVANCED_FACE('',(#39875),#39893,.T.); +#39875 = FACE_BOUND('',#39876,.F.); +#39876 = EDGE_LOOP('',(#39877,#39885,#39886,#39887)); +#39877 = ORIENTED_EDGE('',*,*,#39878,.F.); +#39878 = EDGE_CURVE('',#39833,#39879,#39881,.T.); +#39879 = VERTEX_POINT('',#39880); +#39880 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#39881 = LINE('',#39882,#39883); +#39882 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#39883 = VECTOR('',#39884,1.); +#39884 = DIRECTION('',(-1.,-0.,-0.)); +#39885 = ORIENTED_EDGE('',*,*,#39840,.T.); +#39886 = ORIENTED_EDGE('',*,*,#36102,.T.); +#39887 = ORIENTED_EDGE('',*,*,#39888,.F.); +#39888 = EDGE_CURVE('',#39879,#36095,#39889,.T.); +#39889 = LINE('',#39890,#39891); +#39890 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#39891 = VECTOR('',#39892,1.); +#39892 = DIRECTION('',(0.,0.,-1.)); +#39893 = PLANE('',#39894); +#39894 = AXIS2_PLACEMENT_3D('',#39895,#39896,#39897); +#39895 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#39896 = DIRECTION('',(-0.,-1.,-0.)); +#39897 = DIRECTION('',(1.,-0.,0.)); +#39898 = ADVANCED_FACE('',(#39899),#39917,.F.); +#39899 = FACE_BOUND('',#39900,.F.); +#39900 = EDGE_LOOP('',(#39901,#39909,#39915,#39916)); +#39901 = ORIENTED_EDGE('',*,*,#39902,.T.); +#39902 = EDGE_CURVE('',#39855,#39903,#39905,.T.); +#39903 = VERTEX_POINT('',#39904); +#39904 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#39905 = LINE('',#39906,#39907); +#39906 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#39907 = VECTOR('',#39908,1.); +#39908 = DIRECTION('',(1.,0.,0.)); +#39909 = ORIENTED_EDGE('',*,*,#39910,.T.); +#39910 = EDGE_CURVE('',#39903,#34767,#39911,.T.); +#39911 = LINE('',#39912,#39913); +#39912 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#39913 = VECTOR('',#39914,1.); +#39914 = DIRECTION('',(-0.,-0.,-1.)); +#39915 = ORIENTED_EDGE('',*,*,#34766,.F.); +#39916 = ORIENTED_EDGE('',*,*,#39864,.F.); +#39917 = PLANE('',#39918); +#39918 = AXIS2_PLACEMENT_3D('',#39919,#39920,#39921); +#39919 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#39920 = DIRECTION('',(0.,1.,0.)); +#39921 = DIRECTION('',(0.,0.,-1.)); +#39922 = ADVANCED_FACE('',(#39923),#39941,.F.); +#39923 = FACE_BOUND('',#39924,.T.); +#39924 = EDGE_LOOP('',(#39925,#39933,#39939,#39940)); +#39925 = ORIENTED_EDGE('',*,*,#39926,.T.); +#39926 = EDGE_CURVE('',#39879,#39927,#39929,.T.); +#39927 = VERTEX_POINT('',#39928); +#39928 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#39929 = LINE('',#39930,#39931); +#39930 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#39931 = VECTOR('',#39932,1.); +#39932 = DIRECTION('',(-1.,-0.,-0.)); +#39933 = ORIENTED_EDGE('',*,*,#39934,.T.); +#39934 = EDGE_CURVE('',#39927,#36087,#39935,.T.); +#39935 = LINE('',#39936,#39937); +#39936 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#39937 = VECTOR('',#39938,1.); +#39938 = DIRECTION('',(0.,0.,-1.)); +#39939 = ORIENTED_EDGE('',*,*,#36094,.F.); +#39940 = ORIENTED_EDGE('',*,*,#39888,.F.); +#39941 = PLANE('',#39942); +#39942 = AXIS2_PLACEMENT_3D('',#39943,#39944,#39945); +#39943 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#39944 = DIRECTION('',(0.,1.,0.)); +#39945 = DIRECTION('',(0.,-0.,1.)); +#39946 = ADVANCED_FACE('',(#39947),#39965,.T.); +#39947 = FACE_BOUND('',#39948,.T.); +#39948 = EDGE_LOOP('',(#39949,#39957,#39958,#39959)); +#39949 = ORIENTED_EDGE('',*,*,#39950,.F.); +#39950 = EDGE_CURVE('',#39903,#39951,#39953,.T.); +#39951 = VERTEX_POINT('',#39952); +#39952 = CARTESIAN_POINT('',(-8.15,-2.81,0.4)); +#39953 = LINE('',#39954,#39955); +#39954 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#39955 = VECTOR('',#39956,1.); +#39956 = DIRECTION('',(0.,-1.,0.)); +#39957 = ORIENTED_EDGE('',*,*,#39910,.T.); +#39958 = ORIENTED_EDGE('',*,*,#34774,.T.); +#39959 = ORIENTED_EDGE('',*,*,#39960,.F.); +#39960 = EDGE_CURVE('',#39951,#34775,#39961,.T.); +#39961 = LINE('',#39962,#39963); +#39962 = CARTESIAN_POINT('',(-8.15,-2.81,0.4)); +#39963 = VECTOR('',#39964,1.); +#39964 = DIRECTION('',(-0.,-0.,-1.)); +#39965 = PLANE('',#39966); +#39966 = AXIS2_PLACEMENT_3D('',#39967,#39968,#39969); +#39967 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#39968 = DIRECTION('',(-1.,0.,0.)); +#39969 = DIRECTION('',(0.,-1.,0.)); +#39970 = ADVANCED_FACE('',(#39971),#39989,.T.); +#39971 = FACE_BOUND('',#39972,.F.); +#39972 = EDGE_LOOP('',(#39973,#39981,#39982,#39983)); +#39973 = ORIENTED_EDGE('',*,*,#39974,.F.); +#39974 = EDGE_CURVE('',#39927,#39975,#39977,.T.); +#39975 = VERTEX_POINT('',#39976); +#39976 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#39977 = LINE('',#39978,#39979); +#39978 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#39979 = VECTOR('',#39980,1.); +#39980 = DIRECTION('',(-0.,-1.,-0.)); +#39981 = ORIENTED_EDGE('',*,*,#39934,.T.); +#39982 = ORIENTED_EDGE('',*,*,#36086,.T.); +#39983 = ORIENTED_EDGE('',*,*,#39984,.F.); +#39984 = EDGE_CURVE('',#39975,#36079,#39985,.T.); +#39985 = LINE('',#39986,#39987); +#39986 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#39987 = VECTOR('',#39988,1.); +#39988 = DIRECTION('',(0.,0.,-1.)); +#39989 = PLANE('',#39990); +#39990 = AXIS2_PLACEMENT_3D('',#39991,#39992,#39993); +#39991 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#39992 = DIRECTION('',(1.,0.,0.)); +#39993 = DIRECTION('',(-0.,1.,0.)); +#39994 = ADVANCED_FACE('',(#39995),#40013,.T.); +#39995 = FACE_BOUND('',#39996,.T.); +#39996 = EDGE_LOOP('',(#39997,#40005,#40006,#40007)); +#39997 = ORIENTED_EDGE('',*,*,#39998,.T.); +#39998 = EDGE_CURVE('',#39999,#39951,#40001,.T.); +#39999 = VERTEX_POINT('',#40000); +#40000 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40001 = LINE('',#40002,#40003); +#40002 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40003 = VECTOR('',#40004,1.); +#40004 = DIRECTION('',(1.,0.,0.)); +#40005 = ORIENTED_EDGE('',*,*,#39960,.T.); +#40006 = ORIENTED_EDGE('',*,*,#34782,.F.); +#40007 = ORIENTED_EDGE('',*,*,#40008,.F.); +#40008 = EDGE_CURVE('',#39999,#34783,#40009,.T.); +#40009 = LINE('',#40010,#40011); +#40010 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40011 = VECTOR('',#40012,1.); +#40012 = DIRECTION('',(-0.,-0.,-1.)); +#40013 = PLANE('',#40014); +#40014 = AXIS2_PLACEMENT_3D('',#40015,#40016,#40017); +#40015 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40016 = DIRECTION('',(0.,1.,0.)); +#40017 = DIRECTION('',(0.,0.,-1.)); +#40018 = ADVANCED_FACE('',(#40019),#40037,.T.); +#40019 = FACE_BOUND('',#40020,.F.); +#40020 = EDGE_LOOP('',(#40021,#40029,#40030,#40031)); +#40021 = ORIENTED_EDGE('',*,*,#40022,.T.); +#40022 = EDGE_CURVE('',#40023,#39975,#40025,.T.); +#40023 = VERTEX_POINT('',#40024); +#40024 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40025 = LINE('',#40026,#40027); +#40026 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40027 = VECTOR('',#40028,1.); +#40028 = DIRECTION('',(-1.,-0.,-0.)); +#40029 = ORIENTED_EDGE('',*,*,#39984,.T.); +#40030 = ORIENTED_EDGE('',*,*,#36078,.F.); +#40031 = ORIENTED_EDGE('',*,*,#40032,.F.); +#40032 = EDGE_CURVE('',#40023,#36071,#40033,.T.); +#40033 = LINE('',#40034,#40035); +#40034 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40035 = VECTOR('',#40036,1.); +#40036 = DIRECTION('',(0.,0.,-1.)); +#40037 = PLANE('',#40038); +#40038 = AXIS2_PLACEMENT_3D('',#40039,#40040,#40041); +#40039 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40040 = DIRECTION('',(0.,1.,0.)); +#40041 = DIRECTION('',(0.,-0.,1.)); +#40042 = ADVANCED_FACE('',(#40043),#40061,.T.); +#40043 = FACE_BOUND('',#40044,.T.); +#40044 = EDGE_LOOP('',(#40045,#40053,#40054,#40055)); +#40045 = ORIENTED_EDGE('',*,*,#40046,.F.); +#40046 = EDGE_CURVE('',#39999,#40047,#40049,.T.); +#40047 = VERTEX_POINT('',#40048); +#40048 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#40049 = LINE('',#40050,#40051); +#40050 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40051 = VECTOR('',#40052,1.); +#40052 = DIRECTION('',(-1.,0.,0.)); +#40053 = ORIENTED_EDGE('',*,*,#40008,.T.); +#40054 = ORIENTED_EDGE('',*,*,#34790,.T.); +#40055 = ORIENTED_EDGE('',*,*,#40056,.F.); +#40056 = EDGE_CURVE('',#40047,#34791,#40057,.T.); +#40057 = LINE('',#40058,#40059); +#40058 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#40059 = VECTOR('',#40060,1.); +#40060 = DIRECTION('',(-0.,-0.,-1.)); +#40061 = PLANE('',#40062); +#40062 = AXIS2_PLACEMENT_3D('',#40063,#40064,#40065); +#40063 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#40064 = DIRECTION('',(0.,1.,0.)); +#40065 = DIRECTION('',(-1.,0.,0.)); +#40066 = ADVANCED_FACE('',(#40067),#40085,.T.); +#40067 = FACE_BOUND('',#40068,.F.); +#40068 = EDGE_LOOP('',(#40069,#40077,#40078,#40079)); +#40069 = ORIENTED_EDGE('',*,*,#40070,.F.); +#40070 = EDGE_CURVE('',#40023,#40071,#40073,.T.); +#40071 = VERTEX_POINT('',#40072); +#40072 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#40073 = LINE('',#40074,#40075); +#40074 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40075 = VECTOR('',#40076,1.); +#40076 = DIRECTION('',(1.,0.,0.)); +#40077 = ORIENTED_EDGE('',*,*,#40032,.T.); +#40078 = ORIENTED_EDGE('',*,*,#36070,.T.); +#40079 = ORIENTED_EDGE('',*,*,#40080,.F.); +#40080 = EDGE_CURVE('',#40071,#36063,#40081,.T.); +#40081 = LINE('',#40082,#40083); +#40082 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#40083 = VECTOR('',#40084,1.); +#40084 = DIRECTION('',(0.,0.,-1.)); +#40085 = PLANE('',#40086); +#40086 = AXIS2_PLACEMENT_3D('',#40087,#40088,#40089); +#40087 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#40088 = DIRECTION('',(0.,1.,0.)); +#40089 = DIRECTION('',(-1.,0.,0.)); +#40090 = ADVANCED_FACE('',(#40091),#40116,.T.); +#40091 = FACE_BOUND('',#40092,.T.); +#40092 = EDGE_LOOP('',(#40093,#40094,#40102,#40108,#40109,#40115)); +#40093 = ORIENTED_EDGE('',*,*,#34798,.F.); +#40094 = ORIENTED_EDGE('',*,*,#40095,.F.); +#40095 = EDGE_CURVE('',#40096,#34799,#40098,.T.); +#40096 = VERTEX_POINT('',#40097); +#40097 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#40098 = LINE('',#40099,#40100); +#40099 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#40100 = VECTOR('',#40101,1.); +#40101 = DIRECTION('',(-0.,-0.,-1.)); +#40102 = ORIENTED_EDGE('',*,*,#40103,.F.); +#40103 = EDGE_CURVE('',#36930,#40096,#40104,.T.); +#40104 = LINE('',#40105,#40106); +#40105 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#40106 = VECTOR('',#40107,1.); +#40107 = DIRECTION('',(-0.,-0.,-1.)); +#40108 = ORIENTED_EDGE('',*,*,#36929,.T.); +#40109 = ORIENTED_EDGE('',*,*,#40110,.T.); +#40110 = EDGE_CURVE('',#36922,#40047,#40111,.T.); +#40111 = LINE('',#40112,#40113); +#40112 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#40113 = VECTOR('',#40114,1.); +#40114 = DIRECTION('',(-0.,-0.,-1.)); +#40115 = ORIENTED_EDGE('',*,*,#40056,.T.); +#40116 = PLANE('',#40117); +#40117 = AXIS2_PLACEMENT_3D('',#40118,#40119,#40120); +#40118 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#40119 = DIRECTION('',(-1.,0.,0.)); +#40120 = DIRECTION('',(0.,1.,0.)); +#40121 = ADVANCED_FACE('',(#40122),#40147,.T.); +#40122 = FACE_BOUND('',#40123,.T.); +#40123 = EDGE_LOOP('',(#40124,#40125,#40126,#40132,#40133,#40141)); +#40124 = ORIENTED_EDGE('',*,*,#36062,.F.); +#40125 = ORIENTED_EDGE('',*,*,#40080,.F.); +#40126 = ORIENTED_EDGE('',*,*,#40127,.F.); +#40127 = EDGE_CURVE('',#37778,#40071,#40128,.T.); +#40128 = LINE('',#40129,#40130); +#40129 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#40130 = VECTOR('',#40131,1.); +#40131 = DIRECTION('',(0.,0.,-1.)); +#40132 = ORIENTED_EDGE('',*,*,#37777,.T.); +#40133 = ORIENTED_EDGE('',*,*,#40134,.T.); +#40134 = EDGE_CURVE('',#37770,#40135,#40137,.T.); +#40135 = VERTEX_POINT('',#40136); +#40136 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#40137 = LINE('',#40138,#40139); +#40138 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#40139 = VECTOR('',#40140,1.); +#40140 = DIRECTION('',(0.,0.,-1.)); +#40141 = ORIENTED_EDGE('',*,*,#40142,.T.); +#40142 = EDGE_CURVE('',#40135,#36055,#40143,.T.); +#40143 = LINE('',#40144,#40145); +#40144 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#40145 = VECTOR('',#40146,1.); +#40146 = DIRECTION('',(0.,0.,-1.)); +#40147 = PLANE('',#40148); +#40148 = AXIS2_PLACEMENT_3D('',#40149,#40150,#40151); +#40149 = CARTESIAN_POINT('',(9.,12.75,0.)); +#40150 = DIRECTION('',(1.,0.,0.)); +#40151 = DIRECTION('',(0.,-1.,0.)); +#40152 = ADVANCED_FACE('',(#40153),#40171,.T.); +#40153 = FACE_BOUND('',#40154,.T.); +#40154 = EDGE_LOOP('',(#40155,#40163,#40164,#40165)); +#40155 = ORIENTED_EDGE('',*,*,#40156,.F.); +#40156 = EDGE_CURVE('',#40096,#40157,#40159,.T.); +#40157 = VERTEX_POINT('',#40158); +#40158 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#40159 = LINE('',#40160,#40161); +#40160 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#40161 = VECTOR('',#40162,1.); +#40162 = DIRECTION('',(1.,0.,0.)); +#40163 = ORIENTED_EDGE('',*,*,#40095,.T.); +#40164 = ORIENTED_EDGE('',*,*,#34806,.T.); +#40165 = ORIENTED_EDGE('',*,*,#40166,.F.); +#40166 = EDGE_CURVE('',#40157,#34807,#40167,.T.); +#40167 = LINE('',#40168,#40169); +#40168 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#40169 = VECTOR('',#40170,1.); +#40170 = DIRECTION('',(-0.,-0.,-1.)); +#40171 = PLANE('',#40172); +#40172 = AXIS2_PLACEMENT_3D('',#40173,#40174,#40175); +#40173 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#40174 = DIRECTION('',(0.,-1.,0.)); +#40175 = DIRECTION('',(1.,0.,0.)); +#40176 = ADVANCED_FACE('',(#40177),#40195,.T.); +#40177 = FACE_BOUND('',#40178,.F.); +#40178 = EDGE_LOOP('',(#40179,#40187,#40188,#40189)); +#40179 = ORIENTED_EDGE('',*,*,#40180,.F.); +#40180 = EDGE_CURVE('',#40135,#40181,#40183,.T.); +#40181 = VERTEX_POINT('',#40182); +#40182 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#40183 = LINE('',#40184,#40185); +#40184 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#40185 = VECTOR('',#40186,1.); +#40186 = DIRECTION('',(-1.,-0.,-0.)); +#40187 = ORIENTED_EDGE('',*,*,#40142,.T.); +#40188 = ORIENTED_EDGE('',*,*,#36054,.T.); +#40189 = ORIENTED_EDGE('',*,*,#40190,.F.); +#40190 = EDGE_CURVE('',#40181,#36047,#40191,.T.); +#40191 = LINE('',#40192,#40193); +#40192 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#40193 = VECTOR('',#40194,1.); +#40194 = DIRECTION('',(0.,0.,-1.)); +#40195 = PLANE('',#40196); +#40196 = AXIS2_PLACEMENT_3D('',#40197,#40198,#40199); +#40197 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#40198 = DIRECTION('',(-0.,-1.,-0.)); +#40199 = DIRECTION('',(1.,-0.,0.)); +#40200 = ADVANCED_FACE('',(#40201),#40219,.F.); +#40201 = FACE_BOUND('',#40202,.F.); +#40202 = EDGE_LOOP('',(#40203,#40211,#40217,#40218)); +#40203 = ORIENTED_EDGE('',*,*,#40204,.T.); +#40204 = EDGE_CURVE('',#40157,#40205,#40207,.T.); +#40205 = VERTEX_POINT('',#40206); +#40206 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#40207 = LINE('',#40208,#40209); +#40208 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#40209 = VECTOR('',#40210,1.); +#40210 = DIRECTION('',(1.,0.,0.)); +#40211 = ORIENTED_EDGE('',*,*,#40212,.T.); +#40212 = EDGE_CURVE('',#40205,#34815,#40213,.T.); +#40213 = LINE('',#40214,#40215); +#40214 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#40215 = VECTOR('',#40216,1.); +#40216 = DIRECTION('',(-0.,-0.,-1.)); +#40217 = ORIENTED_EDGE('',*,*,#34814,.F.); +#40218 = ORIENTED_EDGE('',*,*,#40166,.F.); +#40219 = PLANE('',#40220); +#40220 = AXIS2_PLACEMENT_3D('',#40221,#40222,#40223); +#40221 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#40222 = DIRECTION('',(0.,1.,0.)); +#40223 = DIRECTION('',(0.,0.,-1.)); +#40224 = ADVANCED_FACE('',(#40225),#40243,.F.); +#40225 = FACE_BOUND('',#40226,.T.); +#40226 = EDGE_LOOP('',(#40227,#40235,#40241,#40242)); +#40227 = ORIENTED_EDGE('',*,*,#40228,.T.); +#40228 = EDGE_CURVE('',#40181,#40229,#40231,.T.); +#40229 = VERTEX_POINT('',#40230); +#40230 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#40231 = LINE('',#40232,#40233); +#40232 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#40233 = VECTOR('',#40234,1.); +#40234 = DIRECTION('',(-1.,-0.,-0.)); +#40235 = ORIENTED_EDGE('',*,*,#40236,.T.); +#40236 = EDGE_CURVE('',#40229,#36039,#40237,.T.); +#40237 = LINE('',#40238,#40239); +#40238 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#40239 = VECTOR('',#40240,1.); +#40240 = DIRECTION('',(0.,0.,-1.)); +#40241 = ORIENTED_EDGE('',*,*,#36046,.F.); +#40242 = ORIENTED_EDGE('',*,*,#40190,.F.); +#40243 = PLANE('',#40244); +#40244 = AXIS2_PLACEMENT_3D('',#40245,#40246,#40247); +#40245 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#40246 = DIRECTION('',(0.,1.,0.)); +#40247 = DIRECTION('',(0.,-0.,1.)); +#40248 = ADVANCED_FACE('',(#40249),#40267,.T.); +#40249 = FACE_BOUND('',#40250,.T.); +#40250 = EDGE_LOOP('',(#40251,#40259,#40260,#40261)); +#40251 = ORIENTED_EDGE('',*,*,#40252,.F.); +#40252 = EDGE_CURVE('',#40205,#40253,#40255,.T.); +#40253 = VERTEX_POINT('',#40254); +#40254 = CARTESIAN_POINT('',(-8.15,-4.08,0.4)); +#40255 = LINE('',#40256,#40257); +#40256 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#40257 = VECTOR('',#40258,1.); +#40258 = DIRECTION('',(0.,-1.,0.)); +#40259 = ORIENTED_EDGE('',*,*,#40212,.T.); +#40260 = ORIENTED_EDGE('',*,*,#34822,.T.); +#40261 = ORIENTED_EDGE('',*,*,#40262,.F.); +#40262 = EDGE_CURVE('',#40253,#34823,#40263,.T.); +#40263 = LINE('',#40264,#40265); +#40264 = CARTESIAN_POINT('',(-8.15,-4.08,0.4)); +#40265 = VECTOR('',#40266,1.); +#40266 = DIRECTION('',(-0.,-0.,-1.)); +#40267 = PLANE('',#40268); +#40268 = AXIS2_PLACEMENT_3D('',#40269,#40270,#40271); +#40269 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#40270 = DIRECTION('',(-1.,0.,0.)); +#40271 = DIRECTION('',(0.,-1.,0.)); +#40272 = ADVANCED_FACE('',(#40273),#40291,.T.); +#40273 = FACE_BOUND('',#40274,.F.); +#40274 = EDGE_LOOP('',(#40275,#40283,#40284,#40285)); +#40275 = ORIENTED_EDGE('',*,*,#40276,.F.); +#40276 = EDGE_CURVE('',#40229,#40277,#40279,.T.); +#40277 = VERTEX_POINT('',#40278); +#40278 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#40279 = LINE('',#40280,#40281); +#40280 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#40281 = VECTOR('',#40282,1.); +#40282 = DIRECTION('',(-0.,-1.,-0.)); +#40283 = ORIENTED_EDGE('',*,*,#40236,.T.); +#40284 = ORIENTED_EDGE('',*,*,#36038,.T.); +#40285 = ORIENTED_EDGE('',*,*,#40286,.F.); +#40286 = EDGE_CURVE('',#40277,#36031,#40287,.T.); +#40287 = LINE('',#40288,#40289); +#40288 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#40289 = VECTOR('',#40290,1.); +#40290 = DIRECTION('',(0.,0.,-1.)); +#40291 = PLANE('',#40292); +#40292 = AXIS2_PLACEMENT_3D('',#40293,#40294,#40295); +#40293 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#40294 = DIRECTION('',(1.,0.,0.)); +#40295 = DIRECTION('',(-0.,1.,0.)); +#40296 = ADVANCED_FACE('',(#40297),#40315,.T.); +#40297 = FACE_BOUND('',#40298,.T.); +#40298 = EDGE_LOOP('',(#40299,#40307,#40308,#40309)); +#40299 = ORIENTED_EDGE('',*,*,#40300,.T.); +#40300 = EDGE_CURVE('',#40301,#40253,#40303,.T.); +#40301 = VERTEX_POINT('',#40302); +#40302 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40303 = LINE('',#40304,#40305); +#40304 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40305 = VECTOR('',#40306,1.); +#40306 = DIRECTION('',(1.,0.,0.)); +#40307 = ORIENTED_EDGE('',*,*,#40262,.T.); +#40308 = ORIENTED_EDGE('',*,*,#34830,.F.); +#40309 = ORIENTED_EDGE('',*,*,#40310,.F.); +#40310 = EDGE_CURVE('',#40301,#34831,#40311,.T.); +#40311 = LINE('',#40312,#40313); +#40312 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40313 = VECTOR('',#40314,1.); +#40314 = DIRECTION('',(-0.,-0.,-1.)); +#40315 = PLANE('',#40316); +#40316 = AXIS2_PLACEMENT_3D('',#40317,#40318,#40319); +#40317 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40318 = DIRECTION('',(0.,1.,0.)); +#40319 = DIRECTION('',(0.,0.,-1.)); +#40320 = ADVANCED_FACE('',(#40321),#40339,.T.); +#40321 = FACE_BOUND('',#40322,.F.); +#40322 = EDGE_LOOP('',(#40323,#40331,#40332,#40333)); +#40323 = ORIENTED_EDGE('',*,*,#40324,.T.); +#40324 = EDGE_CURVE('',#40325,#40277,#40327,.T.); +#40325 = VERTEX_POINT('',#40326); +#40326 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40327 = LINE('',#40328,#40329); +#40328 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40329 = VECTOR('',#40330,1.); +#40330 = DIRECTION('',(-1.,-0.,-0.)); +#40331 = ORIENTED_EDGE('',*,*,#40286,.T.); +#40332 = ORIENTED_EDGE('',*,*,#36030,.F.); +#40333 = ORIENTED_EDGE('',*,*,#40334,.F.); +#40334 = EDGE_CURVE('',#40325,#36023,#40335,.T.); +#40335 = LINE('',#40336,#40337); +#40336 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40337 = VECTOR('',#40338,1.); +#40338 = DIRECTION('',(0.,0.,-1.)); +#40339 = PLANE('',#40340); +#40340 = AXIS2_PLACEMENT_3D('',#40341,#40342,#40343); +#40341 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40342 = DIRECTION('',(0.,1.,0.)); +#40343 = DIRECTION('',(0.,-0.,1.)); +#40344 = ADVANCED_FACE('',(#40345),#40363,.T.); +#40345 = FACE_BOUND('',#40346,.T.); +#40346 = EDGE_LOOP('',(#40347,#40355,#40356,#40357)); +#40347 = ORIENTED_EDGE('',*,*,#40348,.F.); +#40348 = EDGE_CURVE('',#40301,#40349,#40351,.T.); +#40349 = VERTEX_POINT('',#40350); +#40350 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#40351 = LINE('',#40352,#40353); +#40352 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40353 = VECTOR('',#40354,1.); +#40354 = DIRECTION('',(-1.,0.,0.)); +#40355 = ORIENTED_EDGE('',*,*,#40310,.T.); +#40356 = ORIENTED_EDGE('',*,*,#34838,.T.); +#40357 = ORIENTED_EDGE('',*,*,#40358,.F.); +#40358 = EDGE_CURVE('',#40349,#34839,#40359,.T.); +#40359 = LINE('',#40360,#40361); +#40360 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#40361 = VECTOR('',#40362,1.); +#40362 = DIRECTION('',(-0.,-0.,-1.)); +#40363 = PLANE('',#40364); +#40364 = AXIS2_PLACEMENT_3D('',#40365,#40366,#40367); +#40365 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#40366 = DIRECTION('',(0.,1.,0.)); +#40367 = DIRECTION('',(-1.,0.,0.)); +#40368 = ADVANCED_FACE('',(#40369),#40387,.T.); +#40369 = FACE_BOUND('',#40370,.F.); +#40370 = EDGE_LOOP('',(#40371,#40379,#40380,#40381)); +#40371 = ORIENTED_EDGE('',*,*,#40372,.F.); +#40372 = EDGE_CURVE('',#40325,#40373,#40375,.T.); +#40373 = VERTEX_POINT('',#40374); +#40374 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#40375 = LINE('',#40376,#40377); +#40376 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40377 = VECTOR('',#40378,1.); +#40378 = DIRECTION('',(1.,0.,0.)); +#40379 = ORIENTED_EDGE('',*,*,#40334,.T.); +#40380 = ORIENTED_EDGE('',*,*,#36022,.T.); +#40381 = ORIENTED_EDGE('',*,*,#40382,.F.); +#40382 = EDGE_CURVE('',#40373,#36015,#40383,.T.); +#40383 = LINE('',#40384,#40385); +#40384 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#40385 = VECTOR('',#40386,1.); +#40386 = DIRECTION('',(0.,0.,-1.)); +#40387 = PLANE('',#40388); +#40388 = AXIS2_PLACEMENT_3D('',#40389,#40390,#40391); +#40389 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#40390 = DIRECTION('',(0.,1.,0.)); +#40391 = DIRECTION('',(-1.,0.,0.)); +#40392 = ADVANCED_FACE('',(#40393),#40418,.T.); +#40393 = FACE_BOUND('',#40394,.T.); +#40394 = EDGE_LOOP('',(#40395,#40396,#40404,#40410,#40411,#40417)); +#40395 = ORIENTED_EDGE('',*,*,#34846,.F.); +#40396 = ORIENTED_EDGE('',*,*,#40397,.F.); +#40397 = EDGE_CURVE('',#40398,#34847,#40400,.T.); +#40398 = VERTEX_POINT('',#40399); +#40399 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#40400 = LINE('',#40401,#40402); +#40401 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#40402 = VECTOR('',#40403,1.); +#40403 = DIRECTION('',(-0.,-0.,-1.)); +#40404 = ORIENTED_EDGE('',*,*,#40405,.F.); +#40405 = EDGE_CURVE('',#36962,#40398,#40406,.T.); +#40406 = LINE('',#40407,#40408); +#40407 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#40408 = VECTOR('',#40409,1.); +#40409 = DIRECTION('',(-0.,-0.,-1.)); +#40410 = ORIENTED_EDGE('',*,*,#36961,.T.); +#40411 = ORIENTED_EDGE('',*,*,#40412,.T.); +#40412 = EDGE_CURVE('',#36954,#40349,#40413,.T.); +#40413 = LINE('',#40414,#40415); +#40414 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#40415 = VECTOR('',#40416,1.); +#40416 = DIRECTION('',(-0.,-0.,-1.)); +#40417 = ORIENTED_EDGE('',*,*,#40358,.T.); +#40418 = PLANE('',#40419); +#40419 = AXIS2_PLACEMENT_3D('',#40420,#40421,#40422); +#40420 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#40421 = DIRECTION('',(-1.,0.,0.)); +#40422 = DIRECTION('',(0.,1.,0.)); +#40423 = ADVANCED_FACE('',(#40424),#40449,.T.); +#40424 = FACE_BOUND('',#40425,.T.); +#40425 = EDGE_LOOP('',(#40426,#40427,#40428,#40434,#40435,#40443)); +#40426 = ORIENTED_EDGE('',*,*,#36014,.F.); +#40427 = ORIENTED_EDGE('',*,*,#40382,.F.); +#40428 = ORIENTED_EDGE('',*,*,#40429,.F.); +#40429 = EDGE_CURVE('',#37746,#40373,#40430,.T.); +#40430 = LINE('',#40431,#40432); +#40431 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#40432 = VECTOR('',#40433,1.); +#40433 = DIRECTION('',(0.,0.,-1.)); +#40434 = ORIENTED_EDGE('',*,*,#37745,.T.); +#40435 = ORIENTED_EDGE('',*,*,#40436,.T.); +#40436 = EDGE_CURVE('',#37738,#40437,#40439,.T.); +#40437 = VERTEX_POINT('',#40438); +#40438 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#40439 = LINE('',#40440,#40441); +#40440 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#40441 = VECTOR('',#40442,1.); +#40442 = DIRECTION('',(0.,0.,-1.)); +#40443 = ORIENTED_EDGE('',*,*,#40444,.T.); +#40444 = EDGE_CURVE('',#40437,#36007,#40445,.T.); +#40445 = LINE('',#40446,#40447); +#40446 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#40447 = VECTOR('',#40448,1.); +#40448 = DIRECTION('',(0.,0.,-1.)); +#40449 = PLANE('',#40450); +#40450 = AXIS2_PLACEMENT_3D('',#40451,#40452,#40453); +#40451 = CARTESIAN_POINT('',(9.,12.75,0.)); +#40452 = DIRECTION('',(1.,0.,0.)); +#40453 = DIRECTION('',(0.,-1.,0.)); +#40454 = ADVANCED_FACE('',(#40455),#40473,.T.); +#40455 = FACE_BOUND('',#40456,.T.); +#40456 = EDGE_LOOP('',(#40457,#40465,#40466,#40467)); +#40457 = ORIENTED_EDGE('',*,*,#40458,.F.); +#40458 = EDGE_CURVE('',#40398,#40459,#40461,.T.); +#40459 = VERTEX_POINT('',#40460); +#40460 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#40461 = LINE('',#40462,#40463); +#40462 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#40463 = VECTOR('',#40464,1.); +#40464 = DIRECTION('',(1.,0.,0.)); +#40465 = ORIENTED_EDGE('',*,*,#40397,.T.); +#40466 = ORIENTED_EDGE('',*,*,#34854,.T.); +#40467 = ORIENTED_EDGE('',*,*,#40468,.F.); +#40468 = EDGE_CURVE('',#40459,#34855,#40469,.T.); +#40469 = LINE('',#40470,#40471); +#40470 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#40471 = VECTOR('',#40472,1.); +#40472 = DIRECTION('',(-0.,-0.,-1.)); +#40473 = PLANE('',#40474); +#40474 = AXIS2_PLACEMENT_3D('',#40475,#40476,#40477); +#40475 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#40476 = DIRECTION('',(0.,-1.,0.)); +#40477 = DIRECTION('',(1.,0.,0.)); +#40478 = ADVANCED_FACE('',(#40479),#40497,.T.); +#40479 = FACE_BOUND('',#40480,.F.); +#40480 = EDGE_LOOP('',(#40481,#40489,#40490,#40491)); +#40481 = ORIENTED_EDGE('',*,*,#40482,.F.); +#40482 = EDGE_CURVE('',#40437,#40483,#40485,.T.); +#40483 = VERTEX_POINT('',#40484); +#40484 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#40485 = LINE('',#40486,#40487); +#40486 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#40487 = VECTOR('',#40488,1.); +#40488 = DIRECTION('',(-1.,-0.,-0.)); +#40489 = ORIENTED_EDGE('',*,*,#40444,.T.); +#40490 = ORIENTED_EDGE('',*,*,#36006,.T.); +#40491 = ORIENTED_EDGE('',*,*,#40492,.F.); +#40492 = EDGE_CURVE('',#40483,#35999,#40493,.T.); +#40493 = LINE('',#40494,#40495); +#40494 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#40495 = VECTOR('',#40496,1.); +#40496 = DIRECTION('',(0.,0.,-1.)); +#40497 = PLANE('',#40498); +#40498 = AXIS2_PLACEMENT_3D('',#40499,#40500,#40501); +#40499 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#40500 = DIRECTION('',(-0.,-1.,-0.)); +#40501 = DIRECTION('',(1.,-0.,0.)); +#40502 = ADVANCED_FACE('',(#40503),#40521,.F.); +#40503 = FACE_BOUND('',#40504,.F.); +#40504 = EDGE_LOOP('',(#40505,#40513,#40519,#40520)); +#40505 = ORIENTED_EDGE('',*,*,#40506,.T.); +#40506 = EDGE_CURVE('',#40459,#40507,#40509,.T.); +#40507 = VERTEX_POINT('',#40508); +#40508 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#40509 = LINE('',#40510,#40511); +#40510 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#40511 = VECTOR('',#40512,1.); +#40512 = DIRECTION('',(1.,0.,0.)); +#40513 = ORIENTED_EDGE('',*,*,#40514,.T.); +#40514 = EDGE_CURVE('',#40507,#34863,#40515,.T.); +#40515 = LINE('',#40516,#40517); +#40516 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#40517 = VECTOR('',#40518,1.); +#40518 = DIRECTION('',(-0.,-0.,-1.)); +#40519 = ORIENTED_EDGE('',*,*,#34862,.F.); +#40520 = ORIENTED_EDGE('',*,*,#40468,.F.); +#40521 = PLANE('',#40522); +#40522 = AXIS2_PLACEMENT_3D('',#40523,#40524,#40525); +#40523 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#40524 = DIRECTION('',(0.,1.,0.)); +#40525 = DIRECTION('',(0.,0.,-1.)); +#40526 = ADVANCED_FACE('',(#40527),#40545,.F.); +#40527 = FACE_BOUND('',#40528,.T.); +#40528 = EDGE_LOOP('',(#40529,#40537,#40543,#40544)); +#40529 = ORIENTED_EDGE('',*,*,#40530,.T.); +#40530 = EDGE_CURVE('',#40483,#40531,#40533,.T.); +#40531 = VERTEX_POINT('',#40532); +#40532 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#40533 = LINE('',#40534,#40535); +#40534 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#40535 = VECTOR('',#40536,1.); +#40536 = DIRECTION('',(-1.,-0.,-0.)); +#40537 = ORIENTED_EDGE('',*,*,#40538,.T.); +#40538 = EDGE_CURVE('',#40531,#35991,#40539,.T.); +#40539 = LINE('',#40540,#40541); +#40540 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#40541 = VECTOR('',#40542,1.); +#40542 = DIRECTION('',(0.,0.,-1.)); +#40543 = ORIENTED_EDGE('',*,*,#35998,.F.); +#40544 = ORIENTED_EDGE('',*,*,#40492,.F.); +#40545 = PLANE('',#40546); +#40546 = AXIS2_PLACEMENT_3D('',#40547,#40548,#40549); +#40547 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#40548 = DIRECTION('',(0.,1.,0.)); +#40549 = DIRECTION('',(0.,-0.,1.)); +#40550 = ADVANCED_FACE('',(#40551),#40569,.T.); +#40551 = FACE_BOUND('',#40552,.T.); +#40552 = EDGE_LOOP('',(#40553,#40561,#40562,#40563)); +#40553 = ORIENTED_EDGE('',*,*,#40554,.F.); +#40554 = EDGE_CURVE('',#40507,#40555,#40557,.T.); +#40555 = VERTEX_POINT('',#40556); +#40556 = CARTESIAN_POINT('',(-8.15,-5.35,0.4)); +#40557 = LINE('',#40558,#40559); +#40558 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#40559 = VECTOR('',#40560,1.); +#40560 = DIRECTION('',(0.,-1.,0.)); +#40561 = ORIENTED_EDGE('',*,*,#40514,.T.); +#40562 = ORIENTED_EDGE('',*,*,#34870,.T.); +#40563 = ORIENTED_EDGE('',*,*,#40564,.F.); +#40564 = EDGE_CURVE('',#40555,#34871,#40565,.T.); +#40565 = LINE('',#40566,#40567); +#40566 = CARTESIAN_POINT('',(-8.15,-5.35,0.4)); +#40567 = VECTOR('',#40568,1.); +#40568 = DIRECTION('',(-0.,-0.,-1.)); +#40569 = PLANE('',#40570); +#40570 = AXIS2_PLACEMENT_3D('',#40571,#40572,#40573); +#40571 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#40572 = DIRECTION('',(-1.,0.,0.)); +#40573 = DIRECTION('',(0.,-1.,0.)); +#40574 = ADVANCED_FACE('',(#40575),#40593,.T.); +#40575 = FACE_BOUND('',#40576,.F.); +#40576 = EDGE_LOOP('',(#40577,#40585,#40586,#40587)); +#40577 = ORIENTED_EDGE('',*,*,#40578,.F.); +#40578 = EDGE_CURVE('',#40531,#40579,#40581,.T.); +#40579 = VERTEX_POINT('',#40580); +#40580 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#40581 = LINE('',#40582,#40583); +#40582 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#40583 = VECTOR('',#40584,1.); +#40584 = DIRECTION('',(-0.,-1.,-0.)); +#40585 = ORIENTED_EDGE('',*,*,#40538,.T.); +#40586 = ORIENTED_EDGE('',*,*,#35990,.T.); +#40587 = ORIENTED_EDGE('',*,*,#40588,.F.); +#40588 = EDGE_CURVE('',#40579,#35983,#40589,.T.); +#40589 = LINE('',#40590,#40591); +#40590 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#40591 = VECTOR('',#40592,1.); +#40592 = DIRECTION('',(0.,0.,-1.)); +#40593 = PLANE('',#40594); +#40594 = AXIS2_PLACEMENT_3D('',#40595,#40596,#40597); +#40595 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#40596 = DIRECTION('',(1.,0.,0.)); +#40597 = DIRECTION('',(-0.,1.,0.)); +#40598 = ADVANCED_FACE('',(#40599),#40617,.T.); +#40599 = FACE_BOUND('',#40600,.T.); +#40600 = EDGE_LOOP('',(#40601,#40609,#40610,#40611)); +#40601 = ORIENTED_EDGE('',*,*,#40602,.T.); +#40602 = EDGE_CURVE('',#40603,#40555,#40605,.T.); +#40603 = VERTEX_POINT('',#40604); +#40604 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40605 = LINE('',#40606,#40607); +#40606 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40607 = VECTOR('',#40608,1.); +#40608 = DIRECTION('',(1.,0.,0.)); +#40609 = ORIENTED_EDGE('',*,*,#40564,.T.); +#40610 = ORIENTED_EDGE('',*,*,#34878,.F.); +#40611 = ORIENTED_EDGE('',*,*,#40612,.F.); +#40612 = EDGE_CURVE('',#40603,#34879,#40613,.T.); +#40613 = LINE('',#40614,#40615); +#40614 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40615 = VECTOR('',#40616,1.); +#40616 = DIRECTION('',(-0.,-0.,-1.)); +#40617 = PLANE('',#40618); +#40618 = AXIS2_PLACEMENT_3D('',#40619,#40620,#40621); +#40619 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40620 = DIRECTION('',(0.,1.,0.)); +#40621 = DIRECTION('',(0.,0.,-1.)); +#40622 = ADVANCED_FACE('',(#40623),#40641,.T.); +#40623 = FACE_BOUND('',#40624,.F.); +#40624 = EDGE_LOOP('',(#40625,#40633,#40634,#40635)); +#40625 = ORIENTED_EDGE('',*,*,#40626,.T.); +#40626 = EDGE_CURVE('',#40627,#40579,#40629,.T.); +#40627 = VERTEX_POINT('',#40628); +#40628 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40629 = LINE('',#40630,#40631); +#40630 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40631 = VECTOR('',#40632,1.); +#40632 = DIRECTION('',(-1.,-0.,-0.)); +#40633 = ORIENTED_EDGE('',*,*,#40588,.T.); +#40634 = ORIENTED_EDGE('',*,*,#35982,.F.); +#40635 = ORIENTED_EDGE('',*,*,#40636,.F.); +#40636 = EDGE_CURVE('',#40627,#35975,#40637,.T.); +#40637 = LINE('',#40638,#40639); +#40638 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40639 = VECTOR('',#40640,1.); +#40640 = DIRECTION('',(0.,0.,-1.)); +#40641 = PLANE('',#40642); +#40642 = AXIS2_PLACEMENT_3D('',#40643,#40644,#40645); +#40643 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40644 = DIRECTION('',(0.,1.,0.)); +#40645 = DIRECTION('',(0.,-0.,1.)); +#40646 = ADVANCED_FACE('',(#40647),#40665,.T.); +#40647 = FACE_BOUND('',#40648,.T.); +#40648 = EDGE_LOOP('',(#40649,#40657,#40658,#40659)); +#40649 = ORIENTED_EDGE('',*,*,#40650,.F.); +#40650 = EDGE_CURVE('',#40603,#40651,#40653,.T.); +#40651 = VERTEX_POINT('',#40652); +#40652 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#40653 = LINE('',#40654,#40655); +#40654 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40655 = VECTOR('',#40656,1.); +#40656 = DIRECTION('',(-1.,0.,0.)); +#40657 = ORIENTED_EDGE('',*,*,#40612,.T.); +#40658 = ORIENTED_EDGE('',*,*,#34886,.T.); +#40659 = ORIENTED_EDGE('',*,*,#40660,.F.); +#40660 = EDGE_CURVE('',#40651,#34887,#40661,.T.); +#40661 = LINE('',#40662,#40663); +#40662 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#40663 = VECTOR('',#40664,1.); +#40664 = DIRECTION('',(-0.,-0.,-1.)); +#40665 = PLANE('',#40666); +#40666 = AXIS2_PLACEMENT_3D('',#40667,#40668,#40669); +#40667 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#40668 = DIRECTION('',(0.,1.,0.)); +#40669 = DIRECTION('',(-1.,0.,0.)); +#40670 = ADVANCED_FACE('',(#40671),#40689,.T.); +#40671 = FACE_BOUND('',#40672,.F.); +#40672 = EDGE_LOOP('',(#40673,#40681,#40682,#40683)); +#40673 = ORIENTED_EDGE('',*,*,#40674,.F.); +#40674 = EDGE_CURVE('',#40627,#40675,#40677,.T.); +#40675 = VERTEX_POINT('',#40676); +#40676 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#40677 = LINE('',#40678,#40679); +#40678 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40679 = VECTOR('',#40680,1.); +#40680 = DIRECTION('',(1.,0.,0.)); +#40681 = ORIENTED_EDGE('',*,*,#40636,.T.); +#40682 = ORIENTED_EDGE('',*,*,#35974,.T.); +#40683 = ORIENTED_EDGE('',*,*,#40684,.F.); +#40684 = EDGE_CURVE('',#40675,#35967,#40685,.T.); +#40685 = LINE('',#40686,#40687); +#40686 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#40687 = VECTOR('',#40688,1.); +#40688 = DIRECTION('',(0.,0.,-1.)); +#40689 = PLANE('',#40690); +#40690 = AXIS2_PLACEMENT_3D('',#40691,#40692,#40693); +#40691 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#40692 = DIRECTION('',(0.,1.,0.)); +#40693 = DIRECTION('',(-1.,0.,0.)); +#40694 = ADVANCED_FACE('',(#40695),#40720,.T.); +#40695 = FACE_BOUND('',#40696,.T.); +#40696 = EDGE_LOOP('',(#40697,#40698,#40706,#40712,#40713,#40719)); +#40697 = ORIENTED_EDGE('',*,*,#34894,.F.); +#40698 = ORIENTED_EDGE('',*,*,#40699,.F.); +#40699 = EDGE_CURVE('',#40700,#34895,#40702,.T.); +#40700 = VERTEX_POINT('',#40701); +#40701 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#40702 = LINE('',#40703,#40704); +#40703 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#40704 = VECTOR('',#40705,1.); +#40705 = DIRECTION('',(-0.,-0.,-1.)); +#40706 = ORIENTED_EDGE('',*,*,#40707,.F.); +#40707 = EDGE_CURVE('',#36994,#40700,#40708,.T.); +#40708 = LINE('',#40709,#40710); +#40709 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#40710 = VECTOR('',#40711,1.); +#40711 = DIRECTION('',(-0.,-0.,-1.)); +#40712 = ORIENTED_EDGE('',*,*,#36993,.T.); +#40713 = ORIENTED_EDGE('',*,*,#40714,.T.); +#40714 = EDGE_CURVE('',#36986,#40651,#40715,.T.); +#40715 = LINE('',#40716,#40717); +#40716 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#40717 = VECTOR('',#40718,1.); +#40718 = DIRECTION('',(-0.,-0.,-1.)); +#40719 = ORIENTED_EDGE('',*,*,#40660,.T.); +#40720 = PLANE('',#40721); +#40721 = AXIS2_PLACEMENT_3D('',#40722,#40723,#40724); +#40722 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#40723 = DIRECTION('',(-1.,0.,0.)); +#40724 = DIRECTION('',(0.,1.,0.)); +#40725 = ADVANCED_FACE('',(#40726),#40751,.T.); +#40726 = FACE_BOUND('',#40727,.T.); +#40727 = EDGE_LOOP('',(#40728,#40729,#40730,#40736,#40737,#40745)); +#40728 = ORIENTED_EDGE('',*,*,#35966,.F.); +#40729 = ORIENTED_EDGE('',*,*,#40684,.F.); +#40730 = ORIENTED_EDGE('',*,*,#40731,.F.); +#40731 = EDGE_CURVE('',#37714,#40675,#40732,.T.); +#40732 = LINE('',#40733,#40734); +#40733 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#40734 = VECTOR('',#40735,1.); +#40735 = DIRECTION('',(0.,0.,-1.)); +#40736 = ORIENTED_EDGE('',*,*,#37713,.T.); +#40737 = ORIENTED_EDGE('',*,*,#40738,.T.); +#40738 = EDGE_CURVE('',#37706,#40739,#40741,.T.); +#40739 = VERTEX_POINT('',#40740); +#40740 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#40741 = LINE('',#40742,#40743); +#40742 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#40743 = VECTOR('',#40744,1.); +#40744 = DIRECTION('',(0.,0.,-1.)); +#40745 = ORIENTED_EDGE('',*,*,#40746,.T.); +#40746 = EDGE_CURVE('',#40739,#35959,#40747,.T.); +#40747 = LINE('',#40748,#40749); +#40748 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#40749 = VECTOR('',#40750,1.); +#40750 = DIRECTION('',(0.,0.,-1.)); +#40751 = PLANE('',#40752); +#40752 = AXIS2_PLACEMENT_3D('',#40753,#40754,#40755); +#40753 = CARTESIAN_POINT('',(9.,12.75,0.)); +#40754 = DIRECTION('',(1.,0.,0.)); +#40755 = DIRECTION('',(0.,-1.,0.)); +#40756 = ADVANCED_FACE('',(#40757),#40775,.T.); +#40757 = FACE_BOUND('',#40758,.T.); +#40758 = EDGE_LOOP('',(#40759,#40767,#40768,#40769)); +#40759 = ORIENTED_EDGE('',*,*,#40760,.F.); +#40760 = EDGE_CURVE('',#40700,#40761,#40763,.T.); +#40761 = VERTEX_POINT('',#40762); +#40762 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#40763 = LINE('',#40764,#40765); +#40764 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#40765 = VECTOR('',#40766,1.); +#40766 = DIRECTION('',(1.,0.,0.)); +#40767 = ORIENTED_EDGE('',*,*,#40699,.T.); +#40768 = ORIENTED_EDGE('',*,*,#34902,.T.); +#40769 = ORIENTED_EDGE('',*,*,#40770,.F.); +#40770 = EDGE_CURVE('',#40761,#34903,#40771,.T.); +#40771 = LINE('',#40772,#40773); +#40772 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#40773 = VECTOR('',#40774,1.); +#40774 = DIRECTION('',(-0.,-0.,-1.)); +#40775 = PLANE('',#40776); +#40776 = AXIS2_PLACEMENT_3D('',#40777,#40778,#40779); +#40777 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#40778 = DIRECTION('',(0.,-1.,0.)); +#40779 = DIRECTION('',(1.,0.,0.)); +#40780 = ADVANCED_FACE('',(#40781),#40799,.T.); +#40781 = FACE_BOUND('',#40782,.F.); +#40782 = EDGE_LOOP('',(#40783,#40791,#40792,#40793)); +#40783 = ORIENTED_EDGE('',*,*,#40784,.F.); +#40784 = EDGE_CURVE('',#40739,#40785,#40787,.T.); +#40785 = VERTEX_POINT('',#40786); +#40786 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#40787 = LINE('',#40788,#40789); +#40788 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#40789 = VECTOR('',#40790,1.); +#40790 = DIRECTION('',(-1.,-0.,-0.)); +#40791 = ORIENTED_EDGE('',*,*,#40746,.T.); +#40792 = ORIENTED_EDGE('',*,*,#35958,.T.); +#40793 = ORIENTED_EDGE('',*,*,#40794,.F.); +#40794 = EDGE_CURVE('',#40785,#35951,#40795,.T.); +#40795 = LINE('',#40796,#40797); +#40796 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#40797 = VECTOR('',#40798,1.); +#40798 = DIRECTION('',(0.,0.,-1.)); +#40799 = PLANE('',#40800); +#40800 = AXIS2_PLACEMENT_3D('',#40801,#40802,#40803); +#40801 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#40802 = DIRECTION('',(-0.,-1.,-0.)); +#40803 = DIRECTION('',(1.,-0.,0.)); +#40804 = ADVANCED_FACE('',(#40805),#40823,.F.); +#40805 = FACE_BOUND('',#40806,.F.); +#40806 = EDGE_LOOP('',(#40807,#40815,#40821,#40822)); +#40807 = ORIENTED_EDGE('',*,*,#40808,.T.); +#40808 = EDGE_CURVE('',#40761,#40809,#40811,.T.); +#40809 = VERTEX_POINT('',#40810); +#40810 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#40811 = LINE('',#40812,#40813); +#40812 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#40813 = VECTOR('',#40814,1.); +#40814 = DIRECTION('',(1.,0.,0.)); +#40815 = ORIENTED_EDGE('',*,*,#40816,.T.); +#40816 = EDGE_CURVE('',#40809,#34911,#40817,.T.); +#40817 = LINE('',#40818,#40819); +#40818 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#40819 = VECTOR('',#40820,1.); +#40820 = DIRECTION('',(-0.,-0.,-1.)); +#40821 = ORIENTED_EDGE('',*,*,#34910,.F.); +#40822 = ORIENTED_EDGE('',*,*,#40770,.F.); +#40823 = PLANE('',#40824); +#40824 = AXIS2_PLACEMENT_3D('',#40825,#40826,#40827); +#40825 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#40826 = DIRECTION('',(0.,1.,0.)); +#40827 = DIRECTION('',(0.,0.,-1.)); +#40828 = ADVANCED_FACE('',(#40829),#40847,.F.); +#40829 = FACE_BOUND('',#40830,.T.); +#40830 = EDGE_LOOP('',(#40831,#40839,#40845,#40846)); +#40831 = ORIENTED_EDGE('',*,*,#40832,.T.); +#40832 = EDGE_CURVE('',#40785,#40833,#40835,.T.); +#40833 = VERTEX_POINT('',#40834); +#40834 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#40835 = LINE('',#40836,#40837); +#40836 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#40837 = VECTOR('',#40838,1.); +#40838 = DIRECTION('',(-1.,-0.,-0.)); +#40839 = ORIENTED_EDGE('',*,*,#40840,.T.); +#40840 = EDGE_CURVE('',#40833,#35943,#40841,.T.); +#40841 = LINE('',#40842,#40843); +#40842 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#40843 = VECTOR('',#40844,1.); +#40844 = DIRECTION('',(0.,0.,-1.)); +#40845 = ORIENTED_EDGE('',*,*,#35950,.F.); +#40846 = ORIENTED_EDGE('',*,*,#40794,.F.); +#40847 = PLANE('',#40848); +#40848 = AXIS2_PLACEMENT_3D('',#40849,#40850,#40851); +#40849 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#40850 = DIRECTION('',(0.,1.,0.)); +#40851 = DIRECTION('',(0.,-0.,1.)); +#40852 = ADVANCED_FACE('',(#40853),#40871,.T.); +#40853 = FACE_BOUND('',#40854,.T.); +#40854 = EDGE_LOOP('',(#40855,#40863,#40864,#40865)); +#40855 = ORIENTED_EDGE('',*,*,#40856,.F.); +#40856 = EDGE_CURVE('',#40809,#40857,#40859,.T.); +#40857 = VERTEX_POINT('',#40858); +#40858 = CARTESIAN_POINT('',(-8.15,-6.62,0.4)); +#40859 = LINE('',#40860,#40861); +#40860 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#40861 = VECTOR('',#40862,1.); +#40862 = DIRECTION('',(0.,-1.,0.)); +#40863 = ORIENTED_EDGE('',*,*,#40816,.T.); +#40864 = ORIENTED_EDGE('',*,*,#34918,.T.); +#40865 = ORIENTED_EDGE('',*,*,#40866,.F.); +#40866 = EDGE_CURVE('',#40857,#34919,#40867,.T.); +#40867 = LINE('',#40868,#40869); +#40868 = CARTESIAN_POINT('',(-8.15,-6.62,0.4)); +#40869 = VECTOR('',#40870,1.); +#40870 = DIRECTION('',(-0.,-0.,-1.)); +#40871 = PLANE('',#40872); +#40872 = AXIS2_PLACEMENT_3D('',#40873,#40874,#40875); +#40873 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#40874 = DIRECTION('',(-1.,0.,0.)); +#40875 = DIRECTION('',(0.,-1.,0.)); +#40876 = ADVANCED_FACE('',(#40877),#40895,.T.); +#40877 = FACE_BOUND('',#40878,.F.); +#40878 = EDGE_LOOP('',(#40879,#40887,#40888,#40889)); +#40879 = ORIENTED_EDGE('',*,*,#40880,.F.); +#40880 = EDGE_CURVE('',#40833,#40881,#40883,.T.); +#40881 = VERTEX_POINT('',#40882); +#40882 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#40883 = LINE('',#40884,#40885); +#40884 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#40885 = VECTOR('',#40886,1.); +#40886 = DIRECTION('',(-0.,-1.,-0.)); +#40887 = ORIENTED_EDGE('',*,*,#40840,.T.); +#40888 = ORIENTED_EDGE('',*,*,#35942,.T.); +#40889 = ORIENTED_EDGE('',*,*,#40890,.F.); +#40890 = EDGE_CURVE('',#40881,#35935,#40891,.T.); +#40891 = LINE('',#40892,#40893); +#40892 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#40893 = VECTOR('',#40894,1.); +#40894 = DIRECTION('',(0.,0.,-1.)); +#40895 = PLANE('',#40896); +#40896 = AXIS2_PLACEMENT_3D('',#40897,#40898,#40899); +#40897 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#40898 = DIRECTION('',(1.,0.,0.)); +#40899 = DIRECTION('',(-0.,1.,0.)); +#40900 = ADVANCED_FACE('',(#40901),#40919,.T.); +#40901 = FACE_BOUND('',#40902,.T.); +#40902 = EDGE_LOOP('',(#40903,#40911,#40912,#40913)); +#40903 = ORIENTED_EDGE('',*,*,#40904,.T.); +#40904 = EDGE_CURVE('',#40905,#40857,#40907,.T.); +#40905 = VERTEX_POINT('',#40906); +#40906 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40907 = LINE('',#40908,#40909); +#40908 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40909 = VECTOR('',#40910,1.); +#40910 = DIRECTION('',(1.,0.,0.)); +#40911 = ORIENTED_EDGE('',*,*,#40866,.T.); +#40912 = ORIENTED_EDGE('',*,*,#34926,.F.); +#40913 = ORIENTED_EDGE('',*,*,#40914,.F.); +#40914 = EDGE_CURVE('',#40905,#34927,#40915,.T.); +#40915 = LINE('',#40916,#40917); +#40916 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40917 = VECTOR('',#40918,1.); +#40918 = DIRECTION('',(-0.,-0.,-1.)); +#40919 = PLANE('',#40920); +#40920 = AXIS2_PLACEMENT_3D('',#40921,#40922,#40923); +#40921 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40922 = DIRECTION('',(0.,1.,0.)); +#40923 = DIRECTION('',(0.,0.,-1.)); +#40924 = ADVANCED_FACE('',(#40925),#40943,.T.); +#40925 = FACE_BOUND('',#40926,.F.); +#40926 = EDGE_LOOP('',(#40927,#40935,#40936,#40937)); +#40927 = ORIENTED_EDGE('',*,*,#40928,.T.); +#40928 = EDGE_CURVE('',#40929,#40881,#40931,.T.); +#40929 = VERTEX_POINT('',#40930); +#40930 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40931 = LINE('',#40932,#40933); +#40932 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40933 = VECTOR('',#40934,1.); +#40934 = DIRECTION('',(-1.,-0.,-0.)); +#40935 = ORIENTED_EDGE('',*,*,#40890,.T.); +#40936 = ORIENTED_EDGE('',*,*,#35934,.F.); +#40937 = ORIENTED_EDGE('',*,*,#40938,.F.); +#40938 = EDGE_CURVE('',#40929,#35927,#40939,.T.); +#40939 = LINE('',#40940,#40941); +#40940 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40941 = VECTOR('',#40942,1.); +#40942 = DIRECTION('',(0.,0.,-1.)); +#40943 = PLANE('',#40944); +#40944 = AXIS2_PLACEMENT_3D('',#40945,#40946,#40947); +#40945 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40946 = DIRECTION('',(0.,1.,0.)); +#40947 = DIRECTION('',(0.,-0.,1.)); +#40948 = ADVANCED_FACE('',(#40949),#40967,.T.); +#40949 = FACE_BOUND('',#40950,.T.); +#40950 = EDGE_LOOP('',(#40951,#40959,#40960,#40961)); +#40951 = ORIENTED_EDGE('',*,*,#40952,.F.); +#40952 = EDGE_CURVE('',#40905,#40953,#40955,.T.); +#40953 = VERTEX_POINT('',#40954); +#40954 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#40955 = LINE('',#40956,#40957); +#40956 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40957 = VECTOR('',#40958,1.); +#40958 = DIRECTION('',(-1.,0.,0.)); +#40959 = ORIENTED_EDGE('',*,*,#40914,.T.); +#40960 = ORIENTED_EDGE('',*,*,#34934,.T.); +#40961 = ORIENTED_EDGE('',*,*,#40962,.F.); +#40962 = EDGE_CURVE('',#40953,#34935,#40963,.T.); +#40963 = LINE('',#40964,#40965); +#40964 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#40965 = VECTOR('',#40966,1.); +#40966 = DIRECTION('',(-0.,-0.,-1.)); +#40967 = PLANE('',#40968); +#40968 = AXIS2_PLACEMENT_3D('',#40969,#40970,#40971); +#40969 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#40970 = DIRECTION('',(0.,1.,0.)); +#40971 = DIRECTION('',(-1.,0.,0.)); +#40972 = ADVANCED_FACE('',(#40973),#40991,.T.); +#40973 = FACE_BOUND('',#40974,.F.); +#40974 = EDGE_LOOP('',(#40975,#40983,#40984,#40985)); +#40975 = ORIENTED_EDGE('',*,*,#40976,.F.); +#40976 = EDGE_CURVE('',#40929,#40977,#40979,.T.); +#40977 = VERTEX_POINT('',#40978); +#40978 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#40979 = LINE('',#40980,#40981); +#40980 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40981 = VECTOR('',#40982,1.); +#40982 = DIRECTION('',(1.,0.,0.)); +#40983 = ORIENTED_EDGE('',*,*,#40938,.T.); +#40984 = ORIENTED_EDGE('',*,*,#35926,.T.); +#40985 = ORIENTED_EDGE('',*,*,#40986,.F.); +#40986 = EDGE_CURVE('',#40977,#35919,#40987,.T.); +#40987 = LINE('',#40988,#40989); +#40988 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#40989 = VECTOR('',#40990,1.); +#40990 = DIRECTION('',(0.,0.,-1.)); +#40991 = PLANE('',#40992); +#40992 = AXIS2_PLACEMENT_3D('',#40993,#40994,#40995); +#40993 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#40994 = DIRECTION('',(0.,1.,0.)); +#40995 = DIRECTION('',(-1.,0.,0.)); +#40996 = ADVANCED_FACE('',(#40997),#41022,.T.); +#40997 = FACE_BOUND('',#40998,.T.); +#40998 = EDGE_LOOP('',(#40999,#41000,#41008,#41014,#41015,#41021)); +#40999 = ORIENTED_EDGE('',*,*,#34942,.F.); +#41000 = ORIENTED_EDGE('',*,*,#41001,.F.); +#41001 = EDGE_CURVE('',#41002,#34943,#41004,.T.); +#41002 = VERTEX_POINT('',#41003); +#41003 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#41004 = LINE('',#41005,#41006); +#41005 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#41006 = VECTOR('',#41007,1.); +#41007 = DIRECTION('',(-0.,-0.,-1.)); +#41008 = ORIENTED_EDGE('',*,*,#41009,.F.); +#41009 = EDGE_CURVE('',#37026,#41002,#41010,.T.); +#41010 = LINE('',#41011,#41012); +#41011 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#41012 = VECTOR('',#41013,1.); +#41013 = DIRECTION('',(-0.,-0.,-1.)); +#41014 = ORIENTED_EDGE('',*,*,#37025,.T.); +#41015 = ORIENTED_EDGE('',*,*,#41016,.T.); +#41016 = EDGE_CURVE('',#37018,#40953,#41017,.T.); +#41017 = LINE('',#41018,#41019); +#41018 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#41019 = VECTOR('',#41020,1.); +#41020 = DIRECTION('',(-0.,-0.,-1.)); +#41021 = ORIENTED_EDGE('',*,*,#40962,.T.); +#41022 = PLANE('',#41023); +#41023 = AXIS2_PLACEMENT_3D('',#41024,#41025,#41026); +#41024 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#41025 = DIRECTION('',(-1.,0.,0.)); +#41026 = DIRECTION('',(0.,1.,0.)); +#41027 = ADVANCED_FACE('',(#41028),#41053,.T.); +#41028 = FACE_BOUND('',#41029,.T.); +#41029 = EDGE_LOOP('',(#41030,#41031,#41032,#41038,#41039,#41047)); +#41030 = ORIENTED_EDGE('',*,*,#35918,.F.); +#41031 = ORIENTED_EDGE('',*,*,#40986,.F.); +#41032 = ORIENTED_EDGE('',*,*,#41033,.F.); +#41033 = EDGE_CURVE('',#37682,#40977,#41034,.T.); +#41034 = LINE('',#41035,#41036); +#41035 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#41036 = VECTOR('',#41037,1.); +#41037 = DIRECTION('',(0.,0.,-1.)); +#41038 = ORIENTED_EDGE('',*,*,#37681,.T.); +#41039 = ORIENTED_EDGE('',*,*,#41040,.T.); +#41040 = EDGE_CURVE('',#37674,#41041,#41043,.T.); +#41041 = VERTEX_POINT('',#41042); +#41042 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#41043 = LINE('',#41044,#41045); +#41044 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#41045 = VECTOR('',#41046,1.); +#41046 = DIRECTION('',(0.,0.,-1.)); +#41047 = ORIENTED_EDGE('',*,*,#41048,.T.); +#41048 = EDGE_CURVE('',#41041,#35911,#41049,.T.); +#41049 = LINE('',#41050,#41051); +#41050 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#41051 = VECTOR('',#41052,1.); +#41052 = DIRECTION('',(0.,0.,-1.)); +#41053 = PLANE('',#41054); +#41054 = AXIS2_PLACEMENT_3D('',#41055,#41056,#41057); +#41055 = CARTESIAN_POINT('',(9.,12.75,0.)); +#41056 = DIRECTION('',(1.,0.,0.)); +#41057 = DIRECTION('',(0.,-1.,0.)); +#41058 = ADVANCED_FACE('',(#41059),#41077,.T.); +#41059 = FACE_BOUND('',#41060,.T.); +#41060 = EDGE_LOOP('',(#41061,#41069,#41070,#41071)); +#41061 = ORIENTED_EDGE('',*,*,#41062,.F.); +#41062 = EDGE_CURVE('',#41002,#41063,#41065,.T.); +#41063 = VERTEX_POINT('',#41064); +#41064 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#41065 = LINE('',#41066,#41067); +#41066 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#41067 = VECTOR('',#41068,1.); +#41068 = DIRECTION('',(1.,0.,0.)); +#41069 = ORIENTED_EDGE('',*,*,#41001,.T.); +#41070 = ORIENTED_EDGE('',*,*,#34950,.T.); +#41071 = ORIENTED_EDGE('',*,*,#41072,.F.); +#41072 = EDGE_CURVE('',#41063,#34951,#41073,.T.); +#41073 = LINE('',#41074,#41075); +#41074 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#41075 = VECTOR('',#41076,1.); +#41076 = DIRECTION('',(-0.,-0.,-1.)); +#41077 = PLANE('',#41078); +#41078 = AXIS2_PLACEMENT_3D('',#41079,#41080,#41081); +#41079 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#41080 = DIRECTION('',(0.,-1.,0.)); +#41081 = DIRECTION('',(1.,0.,0.)); +#41082 = ADVANCED_FACE('',(#41083),#41101,.T.); +#41083 = FACE_BOUND('',#41084,.F.); +#41084 = EDGE_LOOP('',(#41085,#41093,#41094,#41095)); +#41085 = ORIENTED_EDGE('',*,*,#41086,.F.); +#41086 = EDGE_CURVE('',#41041,#41087,#41089,.T.); +#41087 = VERTEX_POINT('',#41088); +#41088 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41089 = LINE('',#41090,#41091); +#41090 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#41091 = VECTOR('',#41092,1.); +#41092 = DIRECTION('',(-1.,-0.,-0.)); +#41093 = ORIENTED_EDGE('',*,*,#41048,.T.); +#41094 = ORIENTED_EDGE('',*,*,#35910,.T.); +#41095 = ORIENTED_EDGE('',*,*,#41096,.F.); +#41096 = EDGE_CURVE('',#41087,#35903,#41097,.T.); +#41097 = LINE('',#41098,#41099); +#41098 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41099 = VECTOR('',#41100,1.); +#41100 = DIRECTION('',(0.,0.,-1.)); +#41101 = PLANE('',#41102); +#41102 = AXIS2_PLACEMENT_3D('',#41103,#41104,#41105); +#41103 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#41104 = DIRECTION('',(-0.,-1.,-0.)); +#41105 = DIRECTION('',(1.,-0.,0.)); +#41106 = ADVANCED_FACE('',(#41107),#41125,.F.); +#41107 = FACE_BOUND('',#41108,.F.); +#41108 = EDGE_LOOP('',(#41109,#41117,#41123,#41124)); +#41109 = ORIENTED_EDGE('',*,*,#41110,.T.); +#41110 = EDGE_CURVE('',#41063,#41111,#41113,.T.); +#41111 = VERTEX_POINT('',#41112); +#41112 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#41113 = LINE('',#41114,#41115); +#41114 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#41115 = VECTOR('',#41116,1.); +#41116 = DIRECTION('',(1.,0.,0.)); +#41117 = ORIENTED_EDGE('',*,*,#41118,.T.); +#41118 = EDGE_CURVE('',#41111,#34959,#41119,.T.); +#41119 = LINE('',#41120,#41121); +#41120 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#41121 = VECTOR('',#41122,1.); +#41122 = DIRECTION('',(-0.,-0.,-1.)); +#41123 = ORIENTED_EDGE('',*,*,#34958,.F.); +#41124 = ORIENTED_EDGE('',*,*,#41072,.F.); +#41125 = PLANE('',#41126); +#41126 = AXIS2_PLACEMENT_3D('',#41127,#41128,#41129); +#41127 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#41128 = DIRECTION('',(0.,1.,0.)); +#41129 = DIRECTION('',(0.,0.,-1.)); +#41130 = ADVANCED_FACE('',(#41131),#41149,.F.); +#41131 = FACE_BOUND('',#41132,.T.); +#41132 = EDGE_LOOP('',(#41133,#41141,#41147,#41148)); +#41133 = ORIENTED_EDGE('',*,*,#41134,.T.); +#41134 = EDGE_CURVE('',#41087,#41135,#41137,.T.); +#41135 = VERTEX_POINT('',#41136); +#41136 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41137 = LINE('',#41138,#41139); +#41138 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41139 = VECTOR('',#41140,1.); +#41140 = DIRECTION('',(-1.,-0.,-0.)); +#41141 = ORIENTED_EDGE('',*,*,#41142,.T.); +#41142 = EDGE_CURVE('',#41135,#35895,#41143,.T.); +#41143 = LINE('',#41144,#41145); +#41144 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41145 = VECTOR('',#41146,1.); +#41146 = DIRECTION('',(0.,0.,-1.)); +#41147 = ORIENTED_EDGE('',*,*,#35902,.F.); +#41148 = ORIENTED_EDGE('',*,*,#41096,.F.); +#41149 = PLANE('',#41150); +#41150 = AXIS2_PLACEMENT_3D('',#41151,#41152,#41153); +#41151 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#41152 = DIRECTION('',(0.,1.,0.)); +#41153 = DIRECTION('',(0.,-0.,1.)); +#41154 = ADVANCED_FACE('',(#41155),#41173,.T.); +#41155 = FACE_BOUND('',#41156,.T.); +#41156 = EDGE_LOOP('',(#41157,#41165,#41166,#41167)); +#41157 = ORIENTED_EDGE('',*,*,#41158,.F.); +#41158 = EDGE_CURVE('',#41111,#41159,#41161,.T.); +#41159 = VERTEX_POINT('',#41160); +#41160 = CARTESIAN_POINT('',(-8.15,-7.89,0.4)); +#41161 = LINE('',#41162,#41163); +#41162 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#41163 = VECTOR('',#41164,1.); +#41164 = DIRECTION('',(0.,-1.,0.)); +#41165 = ORIENTED_EDGE('',*,*,#41118,.T.); +#41166 = ORIENTED_EDGE('',*,*,#34966,.T.); +#41167 = ORIENTED_EDGE('',*,*,#41168,.F.); +#41168 = EDGE_CURVE('',#41159,#34967,#41169,.T.); +#41169 = LINE('',#41170,#41171); +#41170 = CARTESIAN_POINT('',(-8.15,-7.89,0.4)); +#41171 = VECTOR('',#41172,1.); +#41172 = DIRECTION('',(-0.,-0.,-1.)); +#41173 = PLANE('',#41174); +#41174 = AXIS2_PLACEMENT_3D('',#41175,#41176,#41177); +#41175 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#41176 = DIRECTION('',(-1.,0.,0.)); +#41177 = DIRECTION('',(0.,-1.,0.)); +#41178 = ADVANCED_FACE('',(#41179),#41197,.T.); +#41179 = FACE_BOUND('',#41180,.F.); +#41180 = EDGE_LOOP('',(#41181,#41189,#41190,#41191)); +#41181 = ORIENTED_EDGE('',*,*,#41182,.F.); +#41182 = EDGE_CURVE('',#41135,#41183,#41185,.T.); +#41183 = VERTEX_POINT('',#41184); +#41184 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#41185 = LINE('',#41186,#41187); +#41186 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41187 = VECTOR('',#41188,1.); +#41188 = DIRECTION('',(-0.,-1.,-0.)); +#41189 = ORIENTED_EDGE('',*,*,#41142,.T.); +#41190 = ORIENTED_EDGE('',*,*,#35894,.T.); +#41191 = ORIENTED_EDGE('',*,*,#41192,.F.); +#41192 = EDGE_CURVE('',#41183,#35887,#41193,.T.); +#41193 = LINE('',#41194,#41195); +#41194 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#41195 = VECTOR('',#41196,1.); +#41196 = DIRECTION('',(0.,0.,-1.)); +#41197 = PLANE('',#41198); +#41198 = AXIS2_PLACEMENT_3D('',#41199,#41200,#41201); +#41199 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#41200 = DIRECTION('',(1.,0.,0.)); +#41201 = DIRECTION('',(-0.,1.,0.)); +#41202 = ADVANCED_FACE('',(#41203),#41221,.T.); +#41203 = FACE_BOUND('',#41204,.T.); +#41204 = EDGE_LOOP('',(#41205,#41213,#41214,#41215)); +#41205 = ORIENTED_EDGE('',*,*,#41206,.T.); +#41206 = EDGE_CURVE('',#41207,#41159,#41209,.T.); +#41207 = VERTEX_POINT('',#41208); +#41208 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41209 = LINE('',#41210,#41211); +#41210 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41211 = VECTOR('',#41212,1.); +#41212 = DIRECTION('',(1.,0.,0.)); +#41213 = ORIENTED_EDGE('',*,*,#41168,.T.); +#41214 = ORIENTED_EDGE('',*,*,#34974,.F.); +#41215 = ORIENTED_EDGE('',*,*,#41216,.F.); +#41216 = EDGE_CURVE('',#41207,#34975,#41217,.T.); +#41217 = LINE('',#41218,#41219); +#41218 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41219 = VECTOR('',#41220,1.); +#41220 = DIRECTION('',(-0.,-0.,-1.)); +#41221 = PLANE('',#41222); +#41222 = AXIS2_PLACEMENT_3D('',#41223,#41224,#41225); +#41223 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41224 = DIRECTION('',(0.,1.,0.)); +#41225 = DIRECTION('',(0.,0.,-1.)); +#41226 = ADVANCED_FACE('',(#41227),#41245,.T.); +#41227 = FACE_BOUND('',#41228,.F.); +#41228 = EDGE_LOOP('',(#41229,#41237,#41238,#41239)); +#41229 = ORIENTED_EDGE('',*,*,#41230,.T.); +#41230 = EDGE_CURVE('',#41231,#41183,#41233,.T.); +#41231 = VERTEX_POINT('',#41232); +#41232 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41233 = LINE('',#41234,#41235); +#41234 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41235 = VECTOR('',#41236,1.); +#41236 = DIRECTION('',(-1.,-0.,-0.)); +#41237 = ORIENTED_EDGE('',*,*,#41192,.T.); +#41238 = ORIENTED_EDGE('',*,*,#35886,.F.); +#41239 = ORIENTED_EDGE('',*,*,#41240,.F.); +#41240 = EDGE_CURVE('',#41231,#35879,#41241,.T.); +#41241 = LINE('',#41242,#41243); +#41242 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41243 = VECTOR('',#41244,1.); +#41244 = DIRECTION('',(0.,0.,-1.)); +#41245 = PLANE('',#41246); +#41246 = AXIS2_PLACEMENT_3D('',#41247,#41248,#41249); +#41247 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41248 = DIRECTION('',(0.,1.,0.)); +#41249 = DIRECTION('',(0.,-0.,1.)); +#41250 = ADVANCED_FACE('',(#41251),#41269,.T.); +#41251 = FACE_BOUND('',#41252,.T.); +#41252 = EDGE_LOOP('',(#41253,#41261,#41262,#41263)); +#41253 = ORIENTED_EDGE('',*,*,#41254,.F.); +#41254 = EDGE_CURVE('',#41207,#41255,#41257,.T.); +#41255 = VERTEX_POINT('',#41256); +#41256 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#41257 = LINE('',#41258,#41259); +#41258 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41259 = VECTOR('',#41260,1.); +#41260 = DIRECTION('',(-1.,0.,0.)); +#41261 = ORIENTED_EDGE('',*,*,#41216,.T.); +#41262 = ORIENTED_EDGE('',*,*,#34982,.T.); +#41263 = ORIENTED_EDGE('',*,*,#41264,.F.); +#41264 = EDGE_CURVE('',#41255,#34983,#41265,.T.); +#41265 = LINE('',#41266,#41267); +#41266 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#41267 = VECTOR('',#41268,1.); +#41268 = DIRECTION('',(-0.,-0.,-1.)); +#41269 = PLANE('',#41270); +#41270 = AXIS2_PLACEMENT_3D('',#41271,#41272,#41273); +#41271 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#41272 = DIRECTION('',(0.,1.,0.)); +#41273 = DIRECTION('',(-1.,0.,0.)); +#41274 = ADVANCED_FACE('',(#41275),#41293,.T.); +#41275 = FACE_BOUND('',#41276,.F.); +#41276 = EDGE_LOOP('',(#41277,#41285,#41286,#41287)); +#41277 = ORIENTED_EDGE('',*,*,#41278,.F.); +#41278 = EDGE_CURVE('',#41231,#41279,#41281,.T.); +#41279 = VERTEX_POINT('',#41280); +#41280 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#41281 = LINE('',#41282,#41283); +#41282 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41283 = VECTOR('',#41284,1.); +#41284 = DIRECTION('',(1.,0.,0.)); +#41285 = ORIENTED_EDGE('',*,*,#41240,.T.); +#41286 = ORIENTED_EDGE('',*,*,#35878,.T.); +#41287 = ORIENTED_EDGE('',*,*,#41288,.F.); +#41288 = EDGE_CURVE('',#41279,#35871,#41289,.T.); +#41289 = LINE('',#41290,#41291); +#41290 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#41291 = VECTOR('',#41292,1.); +#41292 = DIRECTION('',(0.,0.,-1.)); +#41293 = PLANE('',#41294); +#41294 = AXIS2_PLACEMENT_3D('',#41295,#41296,#41297); +#41295 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#41296 = DIRECTION('',(0.,1.,0.)); +#41297 = DIRECTION('',(-1.,0.,0.)); +#41298 = ADVANCED_FACE('',(#41299),#41324,.T.); +#41299 = FACE_BOUND('',#41300,.T.); +#41300 = EDGE_LOOP('',(#41301,#41302,#41310,#41316,#41317,#41323)); +#41301 = ORIENTED_EDGE('',*,*,#34990,.F.); +#41302 = ORIENTED_EDGE('',*,*,#41303,.F.); +#41303 = EDGE_CURVE('',#41304,#34991,#41306,.T.); +#41304 = VERTEX_POINT('',#41305); +#41305 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#41306 = LINE('',#41307,#41308); +#41307 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#41308 = VECTOR('',#41309,1.); +#41309 = DIRECTION('',(-0.,-0.,-1.)); +#41310 = ORIENTED_EDGE('',*,*,#41311,.F.); +#41311 = EDGE_CURVE('',#37058,#41304,#41312,.T.); +#41312 = LINE('',#41313,#41314); +#41313 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#41314 = VECTOR('',#41315,1.); +#41315 = DIRECTION('',(-0.,-0.,-1.)); +#41316 = ORIENTED_EDGE('',*,*,#37057,.T.); +#41317 = ORIENTED_EDGE('',*,*,#41318,.T.); +#41318 = EDGE_CURVE('',#37050,#41255,#41319,.T.); +#41319 = LINE('',#41320,#41321); +#41320 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#41321 = VECTOR('',#41322,1.); +#41322 = DIRECTION('',(-0.,-0.,-1.)); +#41323 = ORIENTED_EDGE('',*,*,#41264,.T.); +#41324 = PLANE('',#41325); +#41325 = AXIS2_PLACEMENT_3D('',#41326,#41327,#41328); +#41326 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#41327 = DIRECTION('',(-1.,0.,0.)); +#41328 = DIRECTION('',(0.,1.,0.)); +#41329 = ADVANCED_FACE('',(#41330),#41355,.T.); +#41330 = FACE_BOUND('',#41331,.T.); +#41331 = EDGE_LOOP('',(#41332,#41333,#41334,#41340,#41341,#41349)); +#41332 = ORIENTED_EDGE('',*,*,#35870,.F.); +#41333 = ORIENTED_EDGE('',*,*,#41288,.F.); +#41334 = ORIENTED_EDGE('',*,*,#41335,.F.); +#41335 = EDGE_CURVE('',#37650,#41279,#41336,.T.); +#41336 = LINE('',#41337,#41338); +#41337 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#41338 = VECTOR('',#41339,1.); +#41339 = DIRECTION('',(0.,0.,-1.)); +#41340 = ORIENTED_EDGE('',*,*,#37649,.T.); +#41341 = ORIENTED_EDGE('',*,*,#41342,.T.); +#41342 = EDGE_CURVE('',#37642,#41343,#41345,.T.); +#41343 = VERTEX_POINT('',#41344); +#41344 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#41345 = LINE('',#41346,#41347); +#41346 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#41347 = VECTOR('',#41348,1.); +#41348 = DIRECTION('',(0.,0.,-1.)); +#41349 = ORIENTED_EDGE('',*,*,#41350,.T.); +#41350 = EDGE_CURVE('',#41343,#35863,#41351,.T.); +#41351 = LINE('',#41352,#41353); +#41352 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#41353 = VECTOR('',#41354,1.); +#41354 = DIRECTION('',(0.,0.,-1.)); +#41355 = PLANE('',#41356); +#41356 = AXIS2_PLACEMENT_3D('',#41357,#41358,#41359); +#41357 = CARTESIAN_POINT('',(9.,12.75,0.)); +#41358 = DIRECTION('',(1.,0.,0.)); +#41359 = DIRECTION('',(0.,-1.,0.)); +#41360 = ADVANCED_FACE('',(#41361),#41379,.T.); +#41361 = FACE_BOUND('',#41362,.T.); +#41362 = EDGE_LOOP('',(#41363,#41371,#41372,#41373)); +#41363 = ORIENTED_EDGE('',*,*,#41364,.F.); +#41364 = EDGE_CURVE('',#41304,#41365,#41367,.T.); +#41365 = VERTEX_POINT('',#41366); +#41366 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#41367 = LINE('',#41368,#41369); +#41368 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#41369 = VECTOR('',#41370,1.); +#41370 = DIRECTION('',(1.,0.,0.)); +#41371 = ORIENTED_EDGE('',*,*,#41303,.T.); +#41372 = ORIENTED_EDGE('',*,*,#34998,.T.); +#41373 = ORIENTED_EDGE('',*,*,#41374,.F.); +#41374 = EDGE_CURVE('',#41365,#34999,#41375,.T.); +#41375 = LINE('',#41376,#41377); +#41376 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#41377 = VECTOR('',#41378,1.); +#41378 = DIRECTION('',(-0.,-0.,-1.)); +#41379 = PLANE('',#41380); +#41380 = AXIS2_PLACEMENT_3D('',#41381,#41382,#41383); +#41381 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#41382 = DIRECTION('',(0.,-1.,0.)); +#41383 = DIRECTION('',(1.,0.,0.)); +#41384 = ADVANCED_FACE('',(#41385),#41403,.T.); +#41385 = FACE_BOUND('',#41386,.F.); +#41386 = EDGE_LOOP('',(#41387,#41395,#41396,#41397)); +#41387 = ORIENTED_EDGE('',*,*,#41388,.F.); +#41388 = EDGE_CURVE('',#41343,#41389,#41391,.T.); +#41389 = VERTEX_POINT('',#41390); +#41390 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41391 = LINE('',#41392,#41393); +#41392 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#41393 = VECTOR('',#41394,1.); +#41394 = DIRECTION('',(-1.,-0.,-0.)); +#41395 = ORIENTED_EDGE('',*,*,#41350,.T.); +#41396 = ORIENTED_EDGE('',*,*,#35862,.T.); +#41397 = ORIENTED_EDGE('',*,*,#41398,.F.); +#41398 = EDGE_CURVE('',#41389,#35855,#41399,.T.); +#41399 = LINE('',#41400,#41401); +#41400 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41401 = VECTOR('',#41402,1.); +#41402 = DIRECTION('',(0.,0.,-1.)); +#41403 = PLANE('',#41404); +#41404 = AXIS2_PLACEMENT_3D('',#41405,#41406,#41407); +#41405 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#41406 = DIRECTION('',(-0.,-1.,-0.)); +#41407 = DIRECTION('',(1.,-0.,0.)); +#41408 = ADVANCED_FACE('',(#41409),#41427,.F.); +#41409 = FACE_BOUND('',#41410,.F.); +#41410 = EDGE_LOOP('',(#41411,#41419,#41425,#41426)); +#41411 = ORIENTED_EDGE('',*,*,#41412,.T.); +#41412 = EDGE_CURVE('',#41365,#41413,#41415,.T.); +#41413 = VERTEX_POINT('',#41414); +#41414 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#41415 = LINE('',#41416,#41417); +#41416 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#41417 = VECTOR('',#41418,1.); +#41418 = DIRECTION('',(1.,0.,0.)); +#41419 = ORIENTED_EDGE('',*,*,#41420,.T.); +#41420 = EDGE_CURVE('',#41413,#35007,#41421,.T.); +#41421 = LINE('',#41422,#41423); +#41422 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#41423 = VECTOR('',#41424,1.); +#41424 = DIRECTION('',(-0.,-0.,-1.)); +#41425 = ORIENTED_EDGE('',*,*,#35006,.F.); +#41426 = ORIENTED_EDGE('',*,*,#41374,.F.); +#41427 = PLANE('',#41428); +#41428 = AXIS2_PLACEMENT_3D('',#41429,#41430,#41431); +#41429 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#41430 = DIRECTION('',(0.,1.,0.)); +#41431 = DIRECTION('',(0.,0.,-1.)); +#41432 = ADVANCED_FACE('',(#41433),#41451,.F.); +#41433 = FACE_BOUND('',#41434,.T.); +#41434 = EDGE_LOOP('',(#41435,#41443,#41449,#41450)); +#41435 = ORIENTED_EDGE('',*,*,#41436,.T.); +#41436 = EDGE_CURVE('',#41389,#41437,#41439,.T.); +#41437 = VERTEX_POINT('',#41438); +#41438 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41439 = LINE('',#41440,#41441); +#41440 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41441 = VECTOR('',#41442,1.); +#41442 = DIRECTION('',(-1.,-0.,-0.)); +#41443 = ORIENTED_EDGE('',*,*,#41444,.T.); +#41444 = EDGE_CURVE('',#41437,#35847,#41445,.T.); +#41445 = LINE('',#41446,#41447); +#41446 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41447 = VECTOR('',#41448,1.); +#41448 = DIRECTION('',(0.,0.,-1.)); +#41449 = ORIENTED_EDGE('',*,*,#35854,.F.); +#41450 = ORIENTED_EDGE('',*,*,#41398,.F.); +#41451 = PLANE('',#41452); +#41452 = AXIS2_PLACEMENT_3D('',#41453,#41454,#41455); +#41453 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#41454 = DIRECTION('',(0.,1.,0.)); +#41455 = DIRECTION('',(0.,-0.,1.)); +#41456 = ADVANCED_FACE('',(#41457),#41475,.T.); +#41457 = FACE_BOUND('',#41458,.T.); +#41458 = EDGE_LOOP('',(#41459,#41467,#41468,#41469)); +#41459 = ORIENTED_EDGE('',*,*,#41460,.F.); +#41460 = EDGE_CURVE('',#41413,#41461,#41463,.T.); +#41461 = VERTEX_POINT('',#41462); +#41462 = CARTESIAN_POINT('',(-8.15,-9.16,0.4)); +#41463 = LINE('',#41464,#41465); +#41464 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#41465 = VECTOR('',#41466,1.); +#41466 = DIRECTION('',(0.,-1.,0.)); +#41467 = ORIENTED_EDGE('',*,*,#41420,.T.); +#41468 = ORIENTED_EDGE('',*,*,#35014,.T.); +#41469 = ORIENTED_EDGE('',*,*,#41470,.F.); +#41470 = EDGE_CURVE('',#41461,#35015,#41471,.T.); +#41471 = LINE('',#41472,#41473); +#41472 = CARTESIAN_POINT('',(-8.15,-9.16,0.4)); +#41473 = VECTOR('',#41474,1.); +#41474 = DIRECTION('',(-0.,-0.,-1.)); +#41475 = PLANE('',#41476); +#41476 = AXIS2_PLACEMENT_3D('',#41477,#41478,#41479); +#41477 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#41478 = DIRECTION('',(-1.,0.,0.)); +#41479 = DIRECTION('',(0.,-1.,0.)); +#41480 = ADVANCED_FACE('',(#41481),#41499,.T.); +#41481 = FACE_BOUND('',#41482,.F.); +#41482 = EDGE_LOOP('',(#41483,#41491,#41492,#41493)); +#41483 = ORIENTED_EDGE('',*,*,#41484,.F.); +#41484 = EDGE_CURVE('',#41437,#41485,#41487,.T.); +#41485 = VERTEX_POINT('',#41486); +#41486 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#41487 = LINE('',#41488,#41489); +#41488 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41489 = VECTOR('',#41490,1.); +#41490 = DIRECTION('',(-0.,-1.,-0.)); +#41491 = ORIENTED_EDGE('',*,*,#41444,.T.); +#41492 = ORIENTED_EDGE('',*,*,#35846,.T.); +#41493 = ORIENTED_EDGE('',*,*,#41494,.F.); +#41494 = EDGE_CURVE('',#41485,#35839,#41495,.T.); +#41495 = LINE('',#41496,#41497); +#41496 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#41497 = VECTOR('',#41498,1.); +#41498 = DIRECTION('',(0.,0.,-1.)); +#41499 = PLANE('',#41500); +#41500 = AXIS2_PLACEMENT_3D('',#41501,#41502,#41503); +#41501 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#41502 = DIRECTION('',(1.,0.,0.)); +#41503 = DIRECTION('',(-0.,1.,0.)); +#41504 = ADVANCED_FACE('',(#41505),#41523,.T.); +#41505 = FACE_BOUND('',#41506,.T.); +#41506 = EDGE_LOOP('',(#41507,#41515,#41516,#41517)); +#41507 = ORIENTED_EDGE('',*,*,#41508,.T.); +#41508 = EDGE_CURVE('',#41509,#41461,#41511,.T.); +#41509 = VERTEX_POINT('',#41510); +#41510 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41511 = LINE('',#41512,#41513); +#41512 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41513 = VECTOR('',#41514,1.); +#41514 = DIRECTION('',(1.,0.,0.)); +#41515 = ORIENTED_EDGE('',*,*,#41470,.T.); +#41516 = ORIENTED_EDGE('',*,*,#35022,.F.); +#41517 = ORIENTED_EDGE('',*,*,#41518,.F.); +#41518 = EDGE_CURVE('',#41509,#35023,#41519,.T.); +#41519 = LINE('',#41520,#41521); +#41520 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41521 = VECTOR('',#41522,1.); +#41522 = DIRECTION('',(-0.,-0.,-1.)); +#41523 = PLANE('',#41524); +#41524 = AXIS2_PLACEMENT_3D('',#41525,#41526,#41527); +#41525 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41526 = DIRECTION('',(0.,1.,0.)); +#41527 = DIRECTION('',(0.,0.,-1.)); +#41528 = ADVANCED_FACE('',(#41529),#41547,.T.); +#41529 = FACE_BOUND('',#41530,.F.); +#41530 = EDGE_LOOP('',(#41531,#41539,#41540,#41541)); +#41531 = ORIENTED_EDGE('',*,*,#41532,.T.); +#41532 = EDGE_CURVE('',#41533,#41485,#41535,.T.); +#41533 = VERTEX_POINT('',#41534); +#41534 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41535 = LINE('',#41536,#41537); +#41536 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41537 = VECTOR('',#41538,1.); +#41538 = DIRECTION('',(-1.,-0.,-0.)); +#41539 = ORIENTED_EDGE('',*,*,#41494,.T.); +#41540 = ORIENTED_EDGE('',*,*,#35838,.F.); +#41541 = ORIENTED_EDGE('',*,*,#41542,.F.); +#41542 = EDGE_CURVE('',#41533,#35831,#41543,.T.); +#41543 = LINE('',#41544,#41545); +#41544 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41545 = VECTOR('',#41546,1.); +#41546 = DIRECTION('',(0.,0.,-1.)); +#41547 = PLANE('',#41548); +#41548 = AXIS2_PLACEMENT_3D('',#41549,#41550,#41551); +#41549 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41550 = DIRECTION('',(0.,1.,0.)); +#41551 = DIRECTION('',(0.,-0.,1.)); +#41552 = ADVANCED_FACE('',(#41553),#41571,.T.); +#41553 = FACE_BOUND('',#41554,.T.); +#41554 = EDGE_LOOP('',(#41555,#41563,#41564,#41565)); +#41555 = ORIENTED_EDGE('',*,*,#41556,.F.); +#41556 = EDGE_CURVE('',#41509,#41557,#41559,.T.); +#41557 = VERTEX_POINT('',#41558); +#41558 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#41559 = LINE('',#41560,#41561); +#41560 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41561 = VECTOR('',#41562,1.); +#41562 = DIRECTION('',(-1.,0.,0.)); +#41563 = ORIENTED_EDGE('',*,*,#41518,.T.); +#41564 = ORIENTED_EDGE('',*,*,#35030,.T.); +#41565 = ORIENTED_EDGE('',*,*,#41566,.F.); +#41566 = EDGE_CURVE('',#41557,#35031,#41567,.T.); +#41567 = LINE('',#41568,#41569); +#41568 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#41569 = VECTOR('',#41570,1.); +#41570 = DIRECTION('',(-0.,-0.,-1.)); +#41571 = PLANE('',#41572); +#41572 = AXIS2_PLACEMENT_3D('',#41573,#41574,#41575); +#41573 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#41574 = DIRECTION('',(0.,1.,0.)); +#41575 = DIRECTION('',(-1.,0.,0.)); +#41576 = ADVANCED_FACE('',(#41577),#41595,.T.); +#41577 = FACE_BOUND('',#41578,.F.); +#41578 = EDGE_LOOP('',(#41579,#41587,#41588,#41589)); +#41579 = ORIENTED_EDGE('',*,*,#41580,.F.); +#41580 = EDGE_CURVE('',#41533,#41581,#41583,.T.); +#41581 = VERTEX_POINT('',#41582); +#41582 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#41583 = LINE('',#41584,#41585); +#41584 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41585 = VECTOR('',#41586,1.); +#41586 = DIRECTION('',(1.,0.,0.)); +#41587 = ORIENTED_EDGE('',*,*,#41542,.T.); +#41588 = ORIENTED_EDGE('',*,*,#35830,.T.); +#41589 = ORIENTED_EDGE('',*,*,#41590,.F.); +#41590 = EDGE_CURVE('',#41581,#35823,#41591,.T.); +#41591 = LINE('',#41592,#41593); +#41592 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#41593 = VECTOR('',#41594,1.); +#41594 = DIRECTION('',(0.,0.,-1.)); +#41595 = PLANE('',#41596); +#41596 = AXIS2_PLACEMENT_3D('',#41597,#41598,#41599); +#41597 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#41598 = DIRECTION('',(0.,1.,0.)); +#41599 = DIRECTION('',(-1.,0.,0.)); +#41600 = ADVANCED_FACE('',(#41601),#41626,.T.); +#41601 = FACE_BOUND('',#41602,.T.); +#41602 = EDGE_LOOP('',(#41603,#41604,#41612,#41618,#41619,#41625)); +#41603 = ORIENTED_EDGE('',*,*,#35038,.F.); +#41604 = ORIENTED_EDGE('',*,*,#41605,.F.); +#41605 = EDGE_CURVE('',#41606,#35039,#41608,.T.); +#41606 = VERTEX_POINT('',#41607); +#41607 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#41608 = LINE('',#41609,#41610); +#41609 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#41610 = VECTOR('',#41611,1.); +#41611 = DIRECTION('',(-0.,-0.,-1.)); +#41612 = ORIENTED_EDGE('',*,*,#41613,.F.); +#41613 = EDGE_CURVE('',#37090,#41606,#41614,.T.); +#41614 = LINE('',#41615,#41616); +#41615 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#41616 = VECTOR('',#41617,1.); +#41617 = DIRECTION('',(-0.,-0.,-1.)); +#41618 = ORIENTED_EDGE('',*,*,#37089,.T.); +#41619 = ORIENTED_EDGE('',*,*,#41620,.T.); +#41620 = EDGE_CURVE('',#37082,#41557,#41621,.T.); +#41621 = LINE('',#41622,#41623); +#41622 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#41623 = VECTOR('',#41624,1.); +#41624 = DIRECTION('',(-0.,-0.,-1.)); +#41625 = ORIENTED_EDGE('',*,*,#41566,.T.); +#41626 = PLANE('',#41627); +#41627 = AXIS2_PLACEMENT_3D('',#41628,#41629,#41630); +#41628 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#41629 = DIRECTION('',(-1.,0.,0.)); +#41630 = DIRECTION('',(0.,1.,0.)); +#41631 = ADVANCED_FACE('',(#41632),#41657,.T.); +#41632 = FACE_BOUND('',#41633,.T.); +#41633 = EDGE_LOOP('',(#41634,#41635,#41636,#41642,#41643,#41651)); +#41634 = ORIENTED_EDGE('',*,*,#35822,.F.); +#41635 = ORIENTED_EDGE('',*,*,#41590,.F.); +#41636 = ORIENTED_EDGE('',*,*,#41637,.F.); +#41637 = EDGE_CURVE('',#37618,#41581,#41638,.T.); +#41638 = LINE('',#41639,#41640); +#41639 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#41640 = VECTOR('',#41641,1.); +#41641 = DIRECTION('',(0.,0.,-1.)); +#41642 = ORIENTED_EDGE('',*,*,#37617,.T.); +#41643 = ORIENTED_EDGE('',*,*,#41644,.T.); +#41644 = EDGE_CURVE('',#37610,#41645,#41647,.T.); +#41645 = VERTEX_POINT('',#41646); +#41646 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#41647 = LINE('',#41648,#41649); +#41648 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#41649 = VECTOR('',#41650,1.); +#41650 = DIRECTION('',(0.,0.,-1.)); +#41651 = ORIENTED_EDGE('',*,*,#41652,.T.); +#41652 = EDGE_CURVE('',#41645,#35815,#41653,.T.); +#41653 = LINE('',#41654,#41655); +#41654 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#41655 = VECTOR('',#41656,1.); +#41656 = DIRECTION('',(0.,0.,-1.)); +#41657 = PLANE('',#41658); +#41658 = AXIS2_PLACEMENT_3D('',#41659,#41660,#41661); +#41659 = CARTESIAN_POINT('',(9.,12.75,0.)); +#41660 = DIRECTION('',(1.,0.,0.)); +#41661 = DIRECTION('',(0.,-1.,0.)); +#41662 = ADVANCED_FACE('',(#41663),#41681,.T.); +#41663 = FACE_BOUND('',#41664,.T.); +#41664 = EDGE_LOOP('',(#41665,#41673,#41674,#41675)); +#41665 = ORIENTED_EDGE('',*,*,#41666,.F.); +#41666 = EDGE_CURVE('',#41606,#41667,#41669,.T.); +#41667 = VERTEX_POINT('',#41668); +#41668 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#41669 = LINE('',#41670,#41671); +#41670 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#41671 = VECTOR('',#41672,1.); +#41672 = DIRECTION('',(1.,0.,0.)); +#41673 = ORIENTED_EDGE('',*,*,#41605,.T.); +#41674 = ORIENTED_EDGE('',*,*,#35046,.T.); +#41675 = ORIENTED_EDGE('',*,*,#41676,.F.); +#41676 = EDGE_CURVE('',#41667,#35047,#41677,.T.); +#41677 = LINE('',#41678,#41679); +#41678 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#41679 = VECTOR('',#41680,1.); +#41680 = DIRECTION('',(-0.,-0.,-1.)); +#41681 = PLANE('',#41682); +#41682 = AXIS2_PLACEMENT_3D('',#41683,#41684,#41685); +#41683 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#41684 = DIRECTION('',(0.,-1.,0.)); +#41685 = DIRECTION('',(1.,0.,0.)); +#41686 = ADVANCED_FACE('',(#41687),#41705,.T.); +#41687 = FACE_BOUND('',#41688,.F.); +#41688 = EDGE_LOOP('',(#41689,#41697,#41698,#41699)); +#41689 = ORIENTED_EDGE('',*,*,#41690,.F.); +#41690 = EDGE_CURVE('',#41645,#41691,#41693,.T.); +#41691 = VERTEX_POINT('',#41692); +#41692 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41693 = LINE('',#41694,#41695); +#41694 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#41695 = VECTOR('',#41696,1.); +#41696 = DIRECTION('',(-1.,-0.,-0.)); +#41697 = ORIENTED_EDGE('',*,*,#41652,.T.); +#41698 = ORIENTED_EDGE('',*,*,#35814,.T.); +#41699 = ORIENTED_EDGE('',*,*,#41700,.F.); +#41700 = EDGE_CURVE('',#41691,#35807,#41701,.T.); +#41701 = LINE('',#41702,#41703); +#41702 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41703 = VECTOR('',#41704,1.); +#41704 = DIRECTION('',(0.,0.,-1.)); +#41705 = PLANE('',#41706); +#41706 = AXIS2_PLACEMENT_3D('',#41707,#41708,#41709); +#41707 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#41708 = DIRECTION('',(-0.,-1.,-0.)); +#41709 = DIRECTION('',(1.,-0.,0.)); +#41710 = ADVANCED_FACE('',(#41711),#41729,.F.); +#41711 = FACE_BOUND('',#41712,.F.); +#41712 = EDGE_LOOP('',(#41713,#41721,#41727,#41728)); +#41713 = ORIENTED_EDGE('',*,*,#41714,.T.); +#41714 = EDGE_CURVE('',#41667,#41715,#41717,.T.); +#41715 = VERTEX_POINT('',#41716); +#41716 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#41717 = LINE('',#41718,#41719); +#41718 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#41719 = VECTOR('',#41720,1.); +#41720 = DIRECTION('',(1.,0.,0.)); +#41721 = ORIENTED_EDGE('',*,*,#41722,.T.); +#41722 = EDGE_CURVE('',#41715,#35055,#41723,.T.); +#41723 = LINE('',#41724,#41725); +#41724 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#41725 = VECTOR('',#41726,1.); +#41726 = DIRECTION('',(-0.,-0.,-1.)); +#41727 = ORIENTED_EDGE('',*,*,#35054,.F.); +#41728 = ORIENTED_EDGE('',*,*,#41676,.F.); +#41729 = PLANE('',#41730); +#41730 = AXIS2_PLACEMENT_3D('',#41731,#41732,#41733); +#41731 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#41732 = DIRECTION('',(0.,1.,0.)); +#41733 = DIRECTION('',(0.,0.,-1.)); +#41734 = ADVANCED_FACE('',(#41735),#41753,.F.); +#41735 = FACE_BOUND('',#41736,.T.); +#41736 = EDGE_LOOP('',(#41737,#41745,#41751,#41752)); +#41737 = ORIENTED_EDGE('',*,*,#41738,.T.); +#41738 = EDGE_CURVE('',#41691,#41739,#41741,.T.); +#41739 = VERTEX_POINT('',#41740); +#41740 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41741 = LINE('',#41742,#41743); +#41742 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41743 = VECTOR('',#41744,1.); +#41744 = DIRECTION('',(-1.,-0.,-0.)); +#41745 = ORIENTED_EDGE('',*,*,#41746,.T.); +#41746 = EDGE_CURVE('',#41739,#35799,#41747,.T.); +#41747 = LINE('',#41748,#41749); +#41748 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41749 = VECTOR('',#41750,1.); +#41750 = DIRECTION('',(0.,0.,-1.)); +#41751 = ORIENTED_EDGE('',*,*,#35806,.F.); +#41752 = ORIENTED_EDGE('',*,*,#41700,.F.); +#41753 = PLANE('',#41754); +#41754 = AXIS2_PLACEMENT_3D('',#41755,#41756,#41757); +#41755 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#41756 = DIRECTION('',(0.,1.,0.)); +#41757 = DIRECTION('',(0.,-0.,1.)); +#41758 = ADVANCED_FACE('',(#41759),#41777,.T.); +#41759 = FACE_BOUND('',#41760,.T.); +#41760 = EDGE_LOOP('',(#41761,#41769,#41770,#41771)); +#41761 = ORIENTED_EDGE('',*,*,#41762,.F.); +#41762 = EDGE_CURVE('',#41715,#41763,#41765,.T.); +#41763 = VERTEX_POINT('',#41764); +#41764 = CARTESIAN_POINT('',(-8.15,-10.43,0.4)); +#41765 = LINE('',#41766,#41767); +#41766 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#41767 = VECTOR('',#41768,1.); +#41768 = DIRECTION('',(0.,-1.,0.)); +#41769 = ORIENTED_EDGE('',*,*,#41722,.T.); +#41770 = ORIENTED_EDGE('',*,*,#35062,.T.); +#41771 = ORIENTED_EDGE('',*,*,#41772,.F.); +#41772 = EDGE_CURVE('',#41763,#35063,#41773,.T.); +#41773 = LINE('',#41774,#41775); +#41774 = CARTESIAN_POINT('',(-8.15,-10.43,0.4)); +#41775 = VECTOR('',#41776,1.); +#41776 = DIRECTION('',(-0.,-0.,-1.)); +#41777 = PLANE('',#41778); +#41778 = AXIS2_PLACEMENT_3D('',#41779,#41780,#41781); +#41779 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#41780 = DIRECTION('',(-1.,0.,0.)); +#41781 = DIRECTION('',(0.,-1.,0.)); +#41782 = ADVANCED_FACE('',(#41783),#41801,.T.); +#41783 = FACE_BOUND('',#41784,.F.); +#41784 = EDGE_LOOP('',(#41785,#41793,#41794,#41795)); +#41785 = ORIENTED_EDGE('',*,*,#41786,.F.); +#41786 = EDGE_CURVE('',#41739,#41787,#41789,.T.); +#41787 = VERTEX_POINT('',#41788); +#41788 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#41789 = LINE('',#41790,#41791); +#41790 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41791 = VECTOR('',#41792,1.); +#41792 = DIRECTION('',(-0.,-1.,-0.)); +#41793 = ORIENTED_EDGE('',*,*,#41746,.T.); +#41794 = ORIENTED_EDGE('',*,*,#35798,.T.); +#41795 = ORIENTED_EDGE('',*,*,#41796,.F.); +#41796 = EDGE_CURVE('',#41787,#35791,#41797,.T.); +#41797 = LINE('',#41798,#41799); +#41798 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#41799 = VECTOR('',#41800,1.); +#41800 = DIRECTION('',(0.,0.,-1.)); +#41801 = PLANE('',#41802); +#41802 = AXIS2_PLACEMENT_3D('',#41803,#41804,#41805); +#41803 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#41804 = DIRECTION('',(1.,0.,0.)); +#41805 = DIRECTION('',(-0.,1.,0.)); +#41806 = ADVANCED_FACE('',(#41807),#41825,.T.); +#41807 = FACE_BOUND('',#41808,.T.); +#41808 = EDGE_LOOP('',(#41809,#41817,#41818,#41819)); +#41809 = ORIENTED_EDGE('',*,*,#41810,.T.); +#41810 = EDGE_CURVE('',#41811,#41763,#41813,.T.); +#41811 = VERTEX_POINT('',#41812); +#41812 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41813 = LINE('',#41814,#41815); +#41814 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41815 = VECTOR('',#41816,1.); +#41816 = DIRECTION('',(1.,0.,0.)); +#41817 = ORIENTED_EDGE('',*,*,#41772,.T.); +#41818 = ORIENTED_EDGE('',*,*,#35070,.F.); +#41819 = ORIENTED_EDGE('',*,*,#41820,.F.); +#41820 = EDGE_CURVE('',#41811,#35071,#41821,.T.); +#41821 = LINE('',#41822,#41823); +#41822 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41823 = VECTOR('',#41824,1.); +#41824 = DIRECTION('',(-0.,-0.,-1.)); +#41825 = PLANE('',#41826); +#41826 = AXIS2_PLACEMENT_3D('',#41827,#41828,#41829); +#41827 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41828 = DIRECTION('',(0.,1.,0.)); +#41829 = DIRECTION('',(0.,0.,-1.)); +#41830 = ADVANCED_FACE('',(#41831),#41849,.T.); +#41831 = FACE_BOUND('',#41832,.F.); +#41832 = EDGE_LOOP('',(#41833,#41841,#41842,#41843)); +#41833 = ORIENTED_EDGE('',*,*,#41834,.T.); +#41834 = EDGE_CURVE('',#41835,#41787,#41837,.T.); +#41835 = VERTEX_POINT('',#41836); +#41836 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41837 = LINE('',#41838,#41839); +#41838 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41839 = VECTOR('',#41840,1.); +#41840 = DIRECTION('',(-1.,-0.,-0.)); +#41841 = ORIENTED_EDGE('',*,*,#41796,.T.); +#41842 = ORIENTED_EDGE('',*,*,#35790,.F.); +#41843 = ORIENTED_EDGE('',*,*,#41844,.F.); +#41844 = EDGE_CURVE('',#41835,#35783,#41845,.T.); +#41845 = LINE('',#41846,#41847); +#41846 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41847 = VECTOR('',#41848,1.); +#41848 = DIRECTION('',(0.,0.,-1.)); +#41849 = PLANE('',#41850); +#41850 = AXIS2_PLACEMENT_3D('',#41851,#41852,#41853); +#41851 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41852 = DIRECTION('',(0.,1.,0.)); +#41853 = DIRECTION('',(0.,-0.,1.)); +#41854 = ADVANCED_FACE('',(#41855),#41873,.T.); +#41855 = FACE_BOUND('',#41856,.T.); +#41856 = EDGE_LOOP('',(#41857,#41865,#41866,#41867)); +#41857 = ORIENTED_EDGE('',*,*,#41858,.F.); +#41858 = EDGE_CURVE('',#41811,#41859,#41861,.T.); +#41859 = VERTEX_POINT('',#41860); +#41860 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#41861 = LINE('',#41862,#41863); +#41862 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41863 = VECTOR('',#41864,1.); +#41864 = DIRECTION('',(-1.,0.,0.)); +#41865 = ORIENTED_EDGE('',*,*,#41820,.T.); +#41866 = ORIENTED_EDGE('',*,*,#35078,.T.); +#41867 = ORIENTED_EDGE('',*,*,#41868,.F.); +#41868 = EDGE_CURVE('',#41859,#35079,#41869,.T.); +#41869 = LINE('',#41870,#41871); +#41870 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#41871 = VECTOR('',#41872,1.); +#41872 = DIRECTION('',(-0.,-0.,-1.)); +#41873 = PLANE('',#41874); +#41874 = AXIS2_PLACEMENT_3D('',#41875,#41876,#41877); +#41875 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#41876 = DIRECTION('',(0.,1.,0.)); +#41877 = DIRECTION('',(-1.,0.,0.)); +#41878 = ADVANCED_FACE('',(#41879),#41897,.T.); +#41879 = FACE_BOUND('',#41880,.F.); +#41880 = EDGE_LOOP('',(#41881,#41889,#41890,#41891)); +#41881 = ORIENTED_EDGE('',*,*,#41882,.F.); +#41882 = EDGE_CURVE('',#41835,#41883,#41885,.T.); +#41883 = VERTEX_POINT('',#41884); +#41884 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#41885 = LINE('',#41886,#41887); +#41886 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41887 = VECTOR('',#41888,1.); +#41888 = DIRECTION('',(1.,0.,0.)); +#41889 = ORIENTED_EDGE('',*,*,#41844,.T.); +#41890 = ORIENTED_EDGE('',*,*,#35782,.T.); +#41891 = ORIENTED_EDGE('',*,*,#41892,.F.); +#41892 = EDGE_CURVE('',#41883,#35775,#41893,.T.); +#41893 = LINE('',#41894,#41895); +#41894 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#41895 = VECTOR('',#41896,1.); +#41896 = DIRECTION('',(0.,0.,-1.)); +#41897 = PLANE('',#41898); +#41898 = AXIS2_PLACEMENT_3D('',#41899,#41900,#41901); +#41899 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#41900 = DIRECTION('',(0.,1.,0.)); +#41901 = DIRECTION('',(-1.,0.,0.)); +#41902 = ADVANCED_FACE('',(#41903),#41928,.T.); +#41903 = FACE_BOUND('',#41904,.T.); +#41904 = EDGE_LOOP('',(#41905,#41906,#41914,#41920,#41921,#41927)); +#41905 = ORIENTED_EDGE('',*,*,#35086,.F.); +#41906 = ORIENTED_EDGE('',*,*,#41907,.F.); +#41907 = EDGE_CURVE('',#41908,#35087,#41910,.T.); +#41908 = VERTEX_POINT('',#41909); +#41909 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#41910 = LINE('',#41911,#41912); +#41911 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#41912 = VECTOR('',#41913,1.); +#41913 = DIRECTION('',(-0.,-0.,-1.)); +#41914 = ORIENTED_EDGE('',*,*,#41915,.F.); +#41915 = EDGE_CURVE('',#37122,#41908,#41916,.T.); +#41916 = LINE('',#41917,#41918); +#41917 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#41918 = VECTOR('',#41919,1.); +#41919 = DIRECTION('',(-0.,-0.,-1.)); +#41920 = ORIENTED_EDGE('',*,*,#37121,.T.); +#41921 = ORIENTED_EDGE('',*,*,#41922,.T.); +#41922 = EDGE_CURVE('',#37114,#41859,#41923,.T.); +#41923 = LINE('',#41924,#41925); +#41924 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#41925 = VECTOR('',#41926,1.); +#41926 = DIRECTION('',(-0.,-0.,-1.)); +#41927 = ORIENTED_EDGE('',*,*,#41868,.T.); +#41928 = PLANE('',#41929); +#41929 = AXIS2_PLACEMENT_3D('',#41930,#41931,#41932); +#41930 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#41931 = DIRECTION('',(-1.,0.,0.)); +#41932 = DIRECTION('',(0.,1.,0.)); +#41933 = ADVANCED_FACE('',(#41934),#41959,.T.); +#41934 = FACE_BOUND('',#41935,.T.); +#41935 = EDGE_LOOP('',(#41936,#41937,#41938,#41944,#41945,#41953)); +#41936 = ORIENTED_EDGE('',*,*,#35774,.F.); +#41937 = ORIENTED_EDGE('',*,*,#41892,.F.); +#41938 = ORIENTED_EDGE('',*,*,#41939,.F.); +#41939 = EDGE_CURVE('',#37586,#41883,#41940,.T.); +#41940 = LINE('',#41941,#41942); +#41941 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#41942 = VECTOR('',#41943,1.); +#41943 = DIRECTION('',(0.,0.,-1.)); +#41944 = ORIENTED_EDGE('',*,*,#37585,.T.); +#41945 = ORIENTED_EDGE('',*,*,#41946,.T.); +#41946 = EDGE_CURVE('',#37578,#41947,#41949,.T.); +#41947 = VERTEX_POINT('',#41948); +#41948 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#41949 = LINE('',#41950,#41951); +#41950 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#41951 = VECTOR('',#41952,1.); +#41952 = DIRECTION('',(0.,0.,-1.)); +#41953 = ORIENTED_EDGE('',*,*,#41954,.T.); +#41954 = EDGE_CURVE('',#41947,#35767,#41955,.T.); +#41955 = LINE('',#41956,#41957); +#41956 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#41957 = VECTOR('',#41958,1.); +#41958 = DIRECTION('',(0.,0.,-1.)); +#41959 = PLANE('',#41960); +#41960 = AXIS2_PLACEMENT_3D('',#41961,#41962,#41963); +#41961 = CARTESIAN_POINT('',(9.,12.75,0.)); +#41962 = DIRECTION('',(1.,0.,0.)); +#41963 = DIRECTION('',(0.,-1.,0.)); +#41964 = ADVANCED_FACE('',(#41965),#41983,.T.); +#41965 = FACE_BOUND('',#41966,.T.); +#41966 = EDGE_LOOP('',(#41967,#41975,#41976,#41977)); +#41967 = ORIENTED_EDGE('',*,*,#41968,.F.); +#41968 = EDGE_CURVE('',#41908,#41969,#41971,.T.); +#41969 = VERTEX_POINT('',#41970); +#41970 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#41971 = LINE('',#41972,#41973); +#41972 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#41973 = VECTOR('',#41974,1.); +#41974 = DIRECTION('',(1.,0.,0.)); +#41975 = ORIENTED_EDGE('',*,*,#41907,.T.); +#41976 = ORIENTED_EDGE('',*,*,#35094,.T.); +#41977 = ORIENTED_EDGE('',*,*,#41978,.F.); +#41978 = EDGE_CURVE('',#41969,#35095,#41979,.T.); +#41979 = LINE('',#41980,#41981); +#41980 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#41981 = VECTOR('',#41982,1.); +#41982 = DIRECTION('',(-0.,-0.,-1.)); +#41983 = PLANE('',#41984); +#41984 = AXIS2_PLACEMENT_3D('',#41985,#41986,#41987); +#41985 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#41986 = DIRECTION('',(0.,-1.,0.)); +#41987 = DIRECTION('',(1.,0.,0.)); +#41988 = ADVANCED_FACE('',(#41989),#42007,.T.); +#41989 = FACE_BOUND('',#41990,.F.); +#41990 = EDGE_LOOP('',(#41991,#41999,#42000,#42001)); +#41991 = ORIENTED_EDGE('',*,*,#41992,.F.); +#41992 = EDGE_CURVE('',#41947,#41993,#41995,.T.); +#41993 = VERTEX_POINT('',#41994); +#41994 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#41995 = LINE('',#41996,#41997); +#41996 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#41997 = VECTOR('',#41998,1.); +#41998 = DIRECTION('',(-1.,-0.,-0.)); +#41999 = ORIENTED_EDGE('',*,*,#41954,.T.); +#42000 = ORIENTED_EDGE('',*,*,#35766,.T.); +#42001 = ORIENTED_EDGE('',*,*,#42002,.F.); +#42002 = EDGE_CURVE('',#41993,#35759,#42003,.T.); +#42003 = LINE('',#42004,#42005); +#42004 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#42005 = VECTOR('',#42006,1.); +#42006 = DIRECTION('',(0.,0.,-1.)); +#42007 = PLANE('',#42008); +#42008 = AXIS2_PLACEMENT_3D('',#42009,#42010,#42011); +#42009 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#42010 = DIRECTION('',(-0.,-1.,-0.)); +#42011 = DIRECTION('',(1.,-0.,0.)); +#42012 = ADVANCED_FACE('',(#42013),#42031,.F.); +#42013 = FACE_BOUND('',#42014,.F.); +#42014 = EDGE_LOOP('',(#42015,#42023,#42029,#42030)); +#42015 = ORIENTED_EDGE('',*,*,#42016,.T.); +#42016 = EDGE_CURVE('',#41969,#42017,#42019,.T.); +#42017 = VERTEX_POINT('',#42018); +#42018 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#42019 = LINE('',#42020,#42021); +#42020 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#42021 = VECTOR('',#42022,1.); +#42022 = DIRECTION('',(1.,0.,0.)); +#42023 = ORIENTED_EDGE('',*,*,#42024,.T.); +#42024 = EDGE_CURVE('',#42017,#35103,#42025,.T.); +#42025 = LINE('',#42026,#42027); +#42026 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#42027 = VECTOR('',#42028,1.); +#42028 = DIRECTION('',(-0.,-0.,-1.)); +#42029 = ORIENTED_EDGE('',*,*,#35102,.F.); +#42030 = ORIENTED_EDGE('',*,*,#41978,.F.); +#42031 = PLANE('',#42032); +#42032 = AXIS2_PLACEMENT_3D('',#42033,#42034,#42035); +#42033 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#42034 = DIRECTION('',(0.,1.,0.)); +#42035 = DIRECTION('',(0.,0.,-1.)); +#42036 = ADVANCED_FACE('',(#42037),#42055,.F.); +#42037 = FACE_BOUND('',#42038,.T.); +#42038 = EDGE_LOOP('',(#42039,#42047,#42053,#42054)); +#42039 = ORIENTED_EDGE('',*,*,#42040,.T.); +#42040 = EDGE_CURVE('',#41993,#42041,#42043,.T.); +#42041 = VERTEX_POINT('',#42042); +#42042 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#42043 = LINE('',#42044,#42045); +#42044 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#42045 = VECTOR('',#42046,1.); +#42046 = DIRECTION('',(-1.,-0.,-0.)); +#42047 = ORIENTED_EDGE('',*,*,#42048,.T.); +#42048 = EDGE_CURVE('',#42041,#35751,#42049,.T.); +#42049 = LINE('',#42050,#42051); +#42050 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#42051 = VECTOR('',#42052,1.); +#42052 = DIRECTION('',(0.,0.,-1.)); +#42053 = ORIENTED_EDGE('',*,*,#35758,.F.); +#42054 = ORIENTED_EDGE('',*,*,#42002,.F.); +#42055 = PLANE('',#42056); +#42056 = AXIS2_PLACEMENT_3D('',#42057,#42058,#42059); +#42057 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#42058 = DIRECTION('',(0.,1.,0.)); +#42059 = DIRECTION('',(0.,-0.,1.)); +#42060 = ADVANCED_FACE('',(#42061),#42079,.T.); +#42061 = FACE_BOUND('',#42062,.T.); +#42062 = EDGE_LOOP('',(#42063,#42071,#42072,#42073)); +#42063 = ORIENTED_EDGE('',*,*,#42064,.F.); +#42064 = EDGE_CURVE('',#42017,#42065,#42067,.T.); +#42065 = VERTEX_POINT('',#42066); +#42066 = CARTESIAN_POINT('',(-8.15,-11.7,0.4)); +#42067 = LINE('',#42068,#42069); +#42068 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#42069 = VECTOR('',#42070,1.); +#42070 = DIRECTION('',(0.,-1.,0.)); +#42071 = ORIENTED_EDGE('',*,*,#42024,.T.); +#42072 = ORIENTED_EDGE('',*,*,#35110,.T.); +#42073 = ORIENTED_EDGE('',*,*,#42074,.F.); +#42074 = EDGE_CURVE('',#42065,#35111,#42075,.T.); +#42075 = LINE('',#42076,#42077); +#42076 = CARTESIAN_POINT('',(-8.15,-11.7,0.4)); +#42077 = VECTOR('',#42078,1.); +#42078 = DIRECTION('',(-0.,-0.,-1.)); +#42079 = PLANE('',#42080); +#42080 = AXIS2_PLACEMENT_3D('',#42081,#42082,#42083); +#42081 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#42082 = DIRECTION('',(-1.,0.,0.)); +#42083 = DIRECTION('',(0.,-1.,0.)); +#42084 = ADVANCED_FACE('',(#42085),#42103,.T.); +#42085 = FACE_BOUND('',#42086,.F.); +#42086 = EDGE_LOOP('',(#42087,#42095,#42096,#42097)); +#42087 = ORIENTED_EDGE('',*,*,#42088,.F.); +#42088 = EDGE_CURVE('',#42041,#42089,#42091,.T.); +#42089 = VERTEX_POINT('',#42090); +#42090 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#42091 = LINE('',#42092,#42093); +#42092 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#42093 = VECTOR('',#42094,1.); +#42094 = DIRECTION('',(-0.,-1.,-0.)); +#42095 = ORIENTED_EDGE('',*,*,#42048,.T.); +#42096 = ORIENTED_EDGE('',*,*,#35750,.T.); +#42097 = ORIENTED_EDGE('',*,*,#42098,.F.); +#42098 = EDGE_CURVE('',#42089,#35743,#42099,.T.); +#42099 = LINE('',#42100,#42101); +#42100 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#42101 = VECTOR('',#42102,1.); +#42102 = DIRECTION('',(0.,0.,-1.)); +#42103 = PLANE('',#42104); +#42104 = AXIS2_PLACEMENT_3D('',#42105,#42106,#42107); +#42105 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#42106 = DIRECTION('',(1.,0.,0.)); +#42107 = DIRECTION('',(-0.,1.,0.)); +#42108 = ADVANCED_FACE('',(#42109),#42127,.T.); +#42109 = FACE_BOUND('',#42110,.T.); +#42110 = EDGE_LOOP('',(#42111,#42119,#42120,#42121)); +#42111 = ORIENTED_EDGE('',*,*,#42112,.T.); +#42112 = EDGE_CURVE('',#42113,#42065,#42115,.T.); +#42113 = VERTEX_POINT('',#42114); +#42114 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42115 = LINE('',#42116,#42117); +#42116 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42117 = VECTOR('',#42118,1.); +#42118 = DIRECTION('',(1.,0.,0.)); +#42119 = ORIENTED_EDGE('',*,*,#42074,.T.); +#42120 = ORIENTED_EDGE('',*,*,#35118,.F.); +#42121 = ORIENTED_EDGE('',*,*,#42122,.F.); +#42122 = EDGE_CURVE('',#42113,#35119,#42123,.T.); +#42123 = LINE('',#42124,#42125); +#42124 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42125 = VECTOR('',#42126,1.); +#42126 = DIRECTION('',(-0.,-0.,-1.)); +#42127 = PLANE('',#42128); +#42128 = AXIS2_PLACEMENT_3D('',#42129,#42130,#42131); +#42129 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42130 = DIRECTION('',(0.,1.,0.)); +#42131 = DIRECTION('',(0.,0.,-1.)); +#42132 = ADVANCED_FACE('',(#42133),#42151,.T.); +#42133 = FACE_BOUND('',#42134,.F.); +#42134 = EDGE_LOOP('',(#42135,#42143,#42144,#42145)); +#42135 = ORIENTED_EDGE('',*,*,#42136,.T.); +#42136 = EDGE_CURVE('',#42137,#42089,#42139,.T.); +#42137 = VERTEX_POINT('',#42138); +#42138 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42139 = LINE('',#42140,#42141); +#42140 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42141 = VECTOR('',#42142,1.); +#42142 = DIRECTION('',(-1.,-0.,-0.)); +#42143 = ORIENTED_EDGE('',*,*,#42098,.T.); +#42144 = ORIENTED_EDGE('',*,*,#35742,.F.); +#42145 = ORIENTED_EDGE('',*,*,#42146,.F.); +#42146 = EDGE_CURVE('',#42137,#35735,#42147,.T.); +#42147 = LINE('',#42148,#42149); +#42148 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42149 = VECTOR('',#42150,1.); +#42150 = DIRECTION('',(0.,0.,-1.)); +#42151 = PLANE('',#42152); +#42152 = AXIS2_PLACEMENT_3D('',#42153,#42154,#42155); +#42153 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42154 = DIRECTION('',(0.,1.,0.)); +#42155 = DIRECTION('',(0.,-0.,1.)); +#42156 = ADVANCED_FACE('',(#42157),#42175,.T.); +#42157 = FACE_BOUND('',#42158,.T.); +#42158 = EDGE_LOOP('',(#42159,#42167,#42168,#42169)); +#42159 = ORIENTED_EDGE('',*,*,#42160,.F.); +#42160 = EDGE_CURVE('',#42113,#42161,#42163,.T.); +#42161 = VERTEX_POINT('',#42162); +#42162 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#42163 = LINE('',#42164,#42165); +#42164 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42165 = VECTOR('',#42166,1.); +#42166 = DIRECTION('',(-1.,0.,0.)); +#42167 = ORIENTED_EDGE('',*,*,#42122,.T.); +#42168 = ORIENTED_EDGE('',*,*,#35126,.T.); +#42169 = ORIENTED_EDGE('',*,*,#42170,.F.); +#42170 = EDGE_CURVE('',#42161,#35127,#42171,.T.); +#42171 = LINE('',#42172,#42173); +#42172 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#42173 = VECTOR('',#42174,1.); +#42174 = DIRECTION('',(-0.,-0.,-1.)); +#42175 = PLANE('',#42176); +#42176 = AXIS2_PLACEMENT_3D('',#42177,#42178,#42179); +#42177 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#42178 = DIRECTION('',(0.,1.,0.)); +#42179 = DIRECTION('',(-1.,0.,0.)); +#42180 = ADVANCED_FACE('',(#42181),#42199,.T.); +#42181 = FACE_BOUND('',#42182,.F.); +#42182 = EDGE_LOOP('',(#42183,#42191,#42192,#42193)); +#42183 = ORIENTED_EDGE('',*,*,#42184,.F.); +#42184 = EDGE_CURVE('',#42137,#42185,#42187,.T.); +#42185 = VERTEX_POINT('',#42186); +#42186 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#42187 = LINE('',#42188,#42189); +#42188 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42189 = VECTOR('',#42190,1.); +#42190 = DIRECTION('',(1.,0.,0.)); +#42191 = ORIENTED_EDGE('',*,*,#42146,.T.); +#42192 = ORIENTED_EDGE('',*,*,#35734,.T.); +#42193 = ORIENTED_EDGE('',*,*,#42194,.F.); +#42194 = EDGE_CURVE('',#42185,#35727,#42195,.T.); +#42195 = LINE('',#42196,#42197); +#42196 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#42197 = VECTOR('',#42198,1.); +#42198 = DIRECTION('',(0.,0.,-1.)); +#42199 = PLANE('',#42200); +#42200 = AXIS2_PLACEMENT_3D('',#42201,#42202,#42203); +#42201 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#42202 = DIRECTION('',(0.,1.,0.)); +#42203 = DIRECTION('',(-1.,0.,0.)); +#42204 = ADVANCED_FACE('',(#42205),#42222,.T.); +#42205 = FACE_BOUND('',#42206,.T.); +#42206 = EDGE_LOOP('',(#42207,#42208,#42214,#42215,#42221)); +#42207 = ORIENTED_EDGE('',*,*,#35134,.F.); +#42208 = ORIENTED_EDGE('',*,*,#42209,.T.); +#42209 = EDGE_CURVE('',#35135,#37154,#42210,.T.); +#42210 = LINE('',#42211,#42212); +#42211 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#42212 = VECTOR('',#42213,1.); +#42213 = DIRECTION('',(0.,0.,1.)); +#42214 = ORIENTED_EDGE('',*,*,#37153,.T.); +#42215 = ORIENTED_EDGE('',*,*,#42216,.T.); +#42216 = EDGE_CURVE('',#37146,#42161,#42217,.T.); +#42217 = LINE('',#42218,#42219); +#42218 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#42219 = VECTOR('',#42220,1.); +#42220 = DIRECTION('',(-0.,-0.,-1.)); +#42221 = ORIENTED_EDGE('',*,*,#42170,.T.); +#42222 = PLANE('',#42223); +#42223 = AXIS2_PLACEMENT_3D('',#42224,#42225,#42226); +#42224 = CARTESIAN_POINT('',(-9.,-12.75,0.)); +#42225 = DIRECTION('',(-1.,0.,0.)); +#42226 = DIRECTION('',(0.,1.,0.)); +#42227 = ADVANCED_FACE('',(#42228),#42245,.T.); +#42228 = FACE_BOUND('',#42229,.T.); +#42229 = EDGE_LOOP('',(#42230,#42231,#42232,#42238,#42239)); +#42230 = ORIENTED_EDGE('',*,*,#35726,.F.); +#42231 = ORIENTED_EDGE('',*,*,#42194,.F.); +#42232 = ORIENTED_EDGE('',*,*,#42233,.F.); +#42233 = EDGE_CURVE('',#37554,#42185,#42234,.T.); +#42234 = LINE('',#42235,#42236); +#42235 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#42236 = VECTOR('',#42237,1.); +#42237 = DIRECTION('',(0.,0.,-1.)); +#42238 = ORIENTED_EDGE('',*,*,#37553,.T.); +#42239 = ORIENTED_EDGE('',*,*,#42240,.F.); +#42240 = EDGE_CURVE('',#35719,#37546,#42241,.T.); +#42241 = LINE('',#42242,#42243); +#42242 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42243 = VECTOR('',#42244,1.); +#42244 = DIRECTION('',(0.,0.,1.)); +#42245 = PLANE('',#42246); +#42246 = AXIS2_PLACEMENT_3D('',#42247,#42248,#42249); +#42247 = CARTESIAN_POINT('',(9.,12.75,0.)); +#42248 = DIRECTION('',(1.,0.,0.)); +#42249 = DIRECTION('',(0.,-1.,0.)); +#42250 = ADVANCED_FACE('',(#42251),#42270,.T.); +#42251 = FACE_BOUND('',#42252,.T.); +#42252 = EDGE_LOOP('',(#42253,#42254,#42262,#42268,#42269)); +#42253 = ORIENTED_EDGE('',*,*,#35142,.F.); +#42254 = ORIENTED_EDGE('',*,*,#42255,.F.); +#42255 = EDGE_CURVE('',#42256,#35143,#42258,.T.); +#42256 = VERTEX_POINT('',#42257); +#42257 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#42258 = LINE('',#42259,#42260); +#42259 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#42260 = VECTOR('',#42261,1.); +#42261 = DIRECTION('',(0.,0.,-1.)); +#42262 = ORIENTED_EDGE('',*,*,#42263,.F.); +#42263 = EDGE_CURVE('',#37162,#42256,#42264,.T.); +#42264 = LINE('',#42265,#42266); +#42265 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#42266 = VECTOR('',#42267,1.); +#42267 = DIRECTION('',(-0.,-0.,-1.)); +#42268 = ORIENTED_EDGE('',*,*,#37161,.T.); +#42269 = ORIENTED_EDGE('',*,*,#42209,.F.); +#42270 = PLANE('',#42271); +#42271 = AXIS2_PLACEMENT_3D('',#42272,#42273,#42274); +#42272 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42273 = DIRECTION('',(0.,-1.,0.)); +#42274 = DIRECTION('',(-1.,0.,0.)); +#42275 = ADVANCED_FACE('',(#42276),#42295,.T.); +#42276 = FACE_BOUND('',#42277,.T.); +#42277 = EDGE_LOOP('',(#42278,#42279,#42280,#42281,#42289)); +#42278 = ORIENTED_EDGE('',*,*,#35718,.F.); +#42279 = ORIENTED_EDGE('',*,*,#42240,.T.); +#42280 = ORIENTED_EDGE('',*,*,#37545,.T.); +#42281 = ORIENTED_EDGE('',*,*,#42282,.T.); +#42282 = EDGE_CURVE('',#37538,#42283,#42285,.T.); +#42283 = VERTEX_POINT('',#42284); +#42284 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#42285 = LINE('',#42286,#42287); +#42286 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#42287 = VECTOR('',#42288,1.); +#42288 = DIRECTION('',(0.,0.,-1.)); +#42289 = ORIENTED_EDGE('',*,*,#42290,.T.); +#42290 = EDGE_CURVE('',#42283,#35711,#42291,.T.); +#42291 = LINE('',#42292,#42293); +#42292 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#42293 = VECTOR('',#42294,1.); +#42294 = DIRECTION('',(0.,0.,-1.)); +#42295 = PLANE('',#42296); +#42296 = AXIS2_PLACEMENT_3D('',#42297,#42298,#42299); +#42297 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42298 = DIRECTION('',(0.,-1.,0.)); +#42299 = DIRECTION('',(-1.,0.,0.)); +#42300 = ADVANCED_FACE('',(#42301),#42319,.T.); +#42301 = FACE_BOUND('',#42302,.T.); +#42302 = EDGE_LOOP('',(#42303,#42311,#42312,#42313)); +#42303 = ORIENTED_EDGE('',*,*,#42304,.F.); +#42304 = EDGE_CURVE('',#42256,#42305,#42307,.T.); +#42305 = VERTEX_POINT('',#42306); +#42306 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#42307 = LINE('',#42308,#42309); +#42308 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#42309 = VECTOR('',#42310,1.); +#42310 = DIRECTION('',(0.,1.,0.)); +#42311 = ORIENTED_EDGE('',*,*,#42255,.T.); +#42312 = ORIENTED_EDGE('',*,*,#35150,.T.); +#42313 = ORIENTED_EDGE('',*,*,#42314,.F.); +#42314 = EDGE_CURVE('',#42305,#35151,#42315,.T.); +#42315 = LINE('',#42316,#42317); +#42316 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#42317 = VECTOR('',#42318,1.); +#42318 = DIRECTION('',(0.,0.,-1.)); +#42319 = PLANE('',#42320); +#42320 = AXIS2_PLACEMENT_3D('',#42321,#42322,#42323); +#42321 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#42322 = DIRECTION('',(1.,0.,0.)); +#42323 = DIRECTION('',(-0.,1.,0.)); +#42324 = ADVANCED_FACE('',(#42325),#42343,.T.); +#42325 = FACE_BOUND('',#42326,.F.); +#42326 = EDGE_LOOP('',(#42327,#42335,#42336,#42337)); +#42327 = ORIENTED_EDGE('',*,*,#42328,.F.); +#42328 = EDGE_CURVE('',#42283,#42329,#42331,.T.); +#42329 = VERTEX_POINT('',#42330); +#42330 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#42331 = LINE('',#42332,#42333); +#42332 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#42333 = VECTOR('',#42334,1.); +#42334 = DIRECTION('',(0.,1.,0.)); +#42335 = ORIENTED_EDGE('',*,*,#42290,.T.); +#42336 = ORIENTED_EDGE('',*,*,#35710,.T.); +#42337 = ORIENTED_EDGE('',*,*,#42338,.F.); +#42338 = EDGE_CURVE('',#42329,#35703,#42339,.T.); +#42339 = LINE('',#42340,#42341); +#42340 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#42341 = VECTOR('',#42342,1.); +#42342 = DIRECTION('',(0.,0.,-1.)); +#42343 = PLANE('',#42344); +#42344 = AXIS2_PLACEMENT_3D('',#42345,#42346,#42347); +#42345 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#42346 = DIRECTION('',(-1.,-0.,-0.)); +#42347 = DIRECTION('',(0.,-1.,0.)); +#42348 = ADVANCED_FACE('',(#42349),#42367,.F.); +#42349 = FACE_BOUND('',#42350,.F.); +#42350 = EDGE_LOOP('',(#42351,#42359,#42365,#42366)); +#42351 = ORIENTED_EDGE('',*,*,#42352,.T.); +#42352 = EDGE_CURVE('',#42305,#42353,#42355,.T.); +#42353 = VERTEX_POINT('',#42354); +#42354 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#42355 = LINE('',#42356,#42357); +#42356 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#42357 = VECTOR('',#42358,1.); +#42358 = DIRECTION('',(0.,1.,0.)); +#42359 = ORIENTED_EDGE('',*,*,#42360,.T.); +#42360 = EDGE_CURVE('',#42353,#35159,#42361,.T.); +#42361 = LINE('',#42362,#42363); +#42362 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#42363 = VECTOR('',#42364,1.); +#42364 = DIRECTION('',(0.,0.,-1.)); +#42365 = ORIENTED_EDGE('',*,*,#35158,.F.); +#42366 = ORIENTED_EDGE('',*,*,#42314,.F.); +#42367 = PLANE('',#42368); +#42368 = AXIS2_PLACEMENT_3D('',#42369,#42370,#42371); +#42369 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#42370 = DIRECTION('',(-1.,0.,0.)); +#42371 = DIRECTION('',(0.,0.,-1.)); +#42372 = ADVANCED_FACE('',(#42373),#42391,.F.); +#42373 = FACE_BOUND('',#42374,.T.); +#42374 = EDGE_LOOP('',(#42375,#42383,#42389,#42390)); +#42375 = ORIENTED_EDGE('',*,*,#42376,.T.); +#42376 = EDGE_CURVE('',#42329,#42377,#42379,.T.); +#42377 = VERTEX_POINT('',#42378); +#42378 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#42379 = LINE('',#42380,#42381); +#42380 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#42381 = VECTOR('',#42382,1.); +#42382 = DIRECTION('',(0.,1.,0.)); +#42383 = ORIENTED_EDGE('',*,*,#42384,.T.); +#42384 = EDGE_CURVE('',#42377,#35695,#42385,.T.); +#42385 = LINE('',#42386,#42387); +#42386 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#42387 = VECTOR('',#42388,1.); +#42388 = DIRECTION('',(0.,0.,-1.)); +#42389 = ORIENTED_EDGE('',*,*,#35702,.F.); +#42390 = ORIENTED_EDGE('',*,*,#42338,.F.); +#42391 = PLANE('',#42392); +#42392 = AXIS2_PLACEMENT_3D('',#42393,#42394,#42395); +#42393 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#42394 = DIRECTION('',(1.,0.,0.)); +#42395 = DIRECTION('',(0.,0.,1.)); +#42396 = ADVANCED_FACE('',(#42397),#42415,.T.); +#42397 = FACE_BOUND('',#42398,.T.); +#42398 = EDGE_LOOP('',(#42399,#42407,#42408,#42409)); +#42399 = ORIENTED_EDGE('',*,*,#42400,.F.); +#42400 = EDGE_CURVE('',#42353,#42401,#42403,.T.); +#42401 = VERTEX_POINT('',#42402); +#42402 = CARTESIAN_POINT('',(-6.535,-11.9,0.4)); +#42403 = LINE('',#42404,#42405); +#42404 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#42405 = VECTOR('',#42406,1.); +#42406 = DIRECTION('',(1.,0.,0.)); +#42407 = ORIENTED_EDGE('',*,*,#42360,.T.); +#42408 = ORIENTED_EDGE('',*,*,#35166,.T.); +#42409 = ORIENTED_EDGE('',*,*,#42410,.F.); +#42410 = EDGE_CURVE('',#42401,#35167,#42411,.T.); +#42411 = LINE('',#42412,#42413); +#42412 = CARTESIAN_POINT('',(-6.535,-11.9,0.4)); +#42413 = VECTOR('',#42414,1.); +#42414 = DIRECTION('',(0.,0.,-1.)); +#42415 = PLANE('',#42416); +#42416 = AXIS2_PLACEMENT_3D('',#42417,#42418,#42419); +#42417 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#42418 = DIRECTION('',(0.,-1.,0.)); +#42419 = DIRECTION('',(1.,0.,0.)); +#42420 = ADVANCED_FACE('',(#42421),#42439,.T.); +#42421 = FACE_BOUND('',#42422,.F.); +#42422 = EDGE_LOOP('',(#42423,#42431,#42432,#42433)); +#42423 = ORIENTED_EDGE('',*,*,#42424,.F.); +#42424 = EDGE_CURVE('',#42377,#42425,#42427,.T.); +#42425 = VERTEX_POINT('',#42426); +#42426 = CARTESIAN_POINT('',(6.535,-11.9,0.4)); +#42427 = LINE('',#42428,#42429); +#42428 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#42429 = VECTOR('',#42430,1.); +#42430 = DIRECTION('',(-1.,-0.,-0.)); +#42431 = ORIENTED_EDGE('',*,*,#42384,.T.); +#42432 = ORIENTED_EDGE('',*,*,#35694,.T.); +#42433 = ORIENTED_EDGE('',*,*,#42434,.F.); +#42434 = EDGE_CURVE('',#42425,#35687,#42435,.T.); +#42435 = LINE('',#42436,#42437); +#42436 = CARTESIAN_POINT('',(6.535,-11.9,0.4)); +#42437 = VECTOR('',#42438,1.); +#42438 = DIRECTION('',(0.,0.,-1.)); +#42439 = PLANE('',#42440); +#42440 = AXIS2_PLACEMENT_3D('',#42441,#42442,#42443); +#42441 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#42442 = DIRECTION('',(-0.,-1.,-0.)); +#42443 = DIRECTION('',(1.,-0.,0.)); +#42444 = ADVANCED_FACE('',(#42445),#42463,.T.); +#42445 = FACE_BOUND('',#42446,.T.); +#42446 = EDGE_LOOP('',(#42447,#42455,#42456,#42457)); +#42447 = ORIENTED_EDGE('',*,*,#42448,.T.); +#42448 = EDGE_CURVE('',#42449,#42401,#42451,.T.); +#42449 = VERTEX_POINT('',#42450); +#42450 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42451 = LINE('',#42452,#42453); +#42452 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42453 = VECTOR('',#42454,1.); +#42454 = DIRECTION('',(0.,1.,0.)); +#42455 = ORIENTED_EDGE('',*,*,#42410,.T.); +#42456 = ORIENTED_EDGE('',*,*,#35174,.F.); +#42457 = ORIENTED_EDGE('',*,*,#42458,.F.); +#42458 = EDGE_CURVE('',#42449,#35175,#42459,.T.); +#42459 = LINE('',#42460,#42461); +#42460 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42461 = VECTOR('',#42462,1.); +#42462 = DIRECTION('',(0.,0.,-1.)); +#42463 = PLANE('',#42464); +#42464 = AXIS2_PLACEMENT_3D('',#42465,#42466,#42467); +#42465 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42466 = DIRECTION('',(-1.,0.,0.)); +#42467 = DIRECTION('',(0.,0.,-1.)); +#42468 = ADVANCED_FACE('',(#42469),#42487,.T.); +#42469 = FACE_BOUND('',#42470,.F.); +#42470 = EDGE_LOOP('',(#42471,#42479,#42480,#42481)); +#42471 = ORIENTED_EDGE('',*,*,#42472,.T.); +#42472 = EDGE_CURVE('',#42473,#42425,#42475,.T.); +#42473 = VERTEX_POINT('',#42474); +#42474 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42475 = LINE('',#42476,#42477); +#42476 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42477 = VECTOR('',#42478,1.); +#42478 = DIRECTION('',(0.,1.,0.)); +#42479 = ORIENTED_EDGE('',*,*,#42434,.T.); +#42480 = ORIENTED_EDGE('',*,*,#35686,.F.); +#42481 = ORIENTED_EDGE('',*,*,#42482,.F.); +#42482 = EDGE_CURVE('',#42473,#35679,#42483,.T.); +#42483 = LINE('',#42484,#42485); +#42484 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42485 = VECTOR('',#42486,1.); +#42486 = DIRECTION('',(0.,0.,-1.)); +#42487 = PLANE('',#42488); +#42488 = AXIS2_PLACEMENT_3D('',#42489,#42490,#42491); +#42489 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42490 = DIRECTION('',(1.,0.,0.)); +#42491 = DIRECTION('',(0.,0.,1.)); +#42492 = ADVANCED_FACE('',(#42493),#42511,.T.); +#42493 = FACE_BOUND('',#42494,.T.); +#42494 = EDGE_LOOP('',(#42495,#42503,#42504,#42505)); +#42495 = ORIENTED_EDGE('',*,*,#42496,.F.); +#42496 = EDGE_CURVE('',#42449,#42497,#42499,.T.); +#42497 = VERTEX_POINT('',#42498); +#42498 = CARTESIAN_POINT('',(-6.535,-12.75,0.4)); +#42499 = LINE('',#42500,#42501); +#42500 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42501 = VECTOR('',#42502,1.); +#42502 = DIRECTION('',(0.,-1.,0.)); +#42503 = ORIENTED_EDGE('',*,*,#42458,.T.); +#42504 = ORIENTED_EDGE('',*,*,#35182,.T.); +#42505 = ORIENTED_EDGE('',*,*,#42506,.F.); +#42506 = EDGE_CURVE('',#42497,#35183,#42507,.T.); +#42507 = LINE('',#42508,#42509); +#42508 = CARTESIAN_POINT('',(-6.535,-12.75,0.4)); +#42509 = VECTOR('',#42510,1.); +#42510 = DIRECTION('',(0.,0.,-1.)); +#42511 = PLANE('',#42512); +#42512 = AXIS2_PLACEMENT_3D('',#42513,#42514,#42515); +#42513 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#42514 = DIRECTION('',(-1.,0.,0.)); +#42515 = DIRECTION('',(0.,-1.,0.)); +#42516 = ADVANCED_FACE('',(#42517),#42535,.T.); +#42517 = FACE_BOUND('',#42518,.F.); +#42518 = EDGE_LOOP('',(#42519,#42527,#42528,#42529)); +#42519 = ORIENTED_EDGE('',*,*,#42520,.F.); +#42520 = EDGE_CURVE('',#42473,#42521,#42523,.T.); +#42521 = VERTEX_POINT('',#42522); +#42522 = CARTESIAN_POINT('',(6.535,-12.75,0.4)); +#42523 = LINE('',#42524,#42525); +#42524 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42525 = VECTOR('',#42526,1.); +#42526 = DIRECTION('',(-0.,-1.,-0.)); +#42527 = ORIENTED_EDGE('',*,*,#42482,.T.); +#42528 = ORIENTED_EDGE('',*,*,#35678,.T.); +#42529 = ORIENTED_EDGE('',*,*,#42530,.F.); +#42530 = EDGE_CURVE('',#42521,#35671,#42531,.T.); +#42531 = LINE('',#42532,#42533); +#42532 = CARTESIAN_POINT('',(6.535,-12.75,0.4)); +#42533 = VECTOR('',#42534,1.); +#42534 = DIRECTION('',(0.,0.,-1.)); +#42535 = PLANE('',#42536); +#42536 = AXIS2_PLACEMENT_3D('',#42537,#42538,#42539); +#42537 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#42538 = DIRECTION('',(1.,0.,0.)); +#42539 = DIRECTION('',(-0.,1.,0.)); +#42540 = ADVANCED_FACE('',(#42541),#42566,.T.); +#42541 = FACE_BOUND('',#42542,.T.); +#42542 = EDGE_LOOP('',(#42543,#42544,#42552,#42558,#42559,#42565)); +#42543 = ORIENTED_EDGE('',*,*,#35190,.F.); +#42544 = ORIENTED_EDGE('',*,*,#42545,.F.); +#42545 = EDGE_CURVE('',#42546,#35191,#42548,.T.); +#42546 = VERTEX_POINT('',#42547); +#42547 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#42548 = LINE('',#42549,#42550); +#42549 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#42550 = VECTOR('',#42551,1.); +#42551 = DIRECTION('',(0.,0.,-1.)); +#42552 = ORIENTED_EDGE('',*,*,#42553,.F.); +#42553 = EDGE_CURVE('',#37194,#42546,#42554,.T.); +#42554 = LINE('',#42555,#42556); +#42555 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#42556 = VECTOR('',#42557,1.); +#42557 = DIRECTION('',(-0.,-0.,-1.)); +#42558 = ORIENTED_EDGE('',*,*,#37193,.T.); +#42559 = ORIENTED_EDGE('',*,*,#42560,.T.); +#42560 = EDGE_CURVE('',#37186,#42497,#42561,.T.); +#42561 = LINE('',#42562,#42563); +#42562 = CARTESIAN_POINT('',(-6.535,-12.75,0.8)); +#42563 = VECTOR('',#42564,1.); +#42564 = DIRECTION('',(-0.,-0.,-1.)); +#42565 = ORIENTED_EDGE('',*,*,#42506,.T.); +#42566 = PLANE('',#42567); +#42567 = AXIS2_PLACEMENT_3D('',#42568,#42569,#42570); +#42568 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42569 = DIRECTION('',(0.,-1.,0.)); +#42570 = DIRECTION('',(-1.,0.,0.)); +#42571 = ADVANCED_FACE('',(#42572),#42597,.T.); +#42572 = FACE_BOUND('',#42573,.T.); +#42573 = EDGE_LOOP('',(#42574,#42575,#42576,#42582,#42583,#42591)); +#42574 = ORIENTED_EDGE('',*,*,#35670,.F.); +#42575 = ORIENTED_EDGE('',*,*,#42530,.F.); +#42576 = ORIENTED_EDGE('',*,*,#42577,.F.); +#42577 = EDGE_CURVE('',#37514,#42521,#42578,.T.); +#42578 = LINE('',#42579,#42580); +#42579 = CARTESIAN_POINT('',(6.535,-12.75,0.8)); +#42580 = VECTOR('',#42581,1.); +#42581 = DIRECTION('',(0.,0.,-1.)); +#42582 = ORIENTED_EDGE('',*,*,#37513,.T.); +#42583 = ORIENTED_EDGE('',*,*,#42584,.T.); +#42584 = EDGE_CURVE('',#37506,#42585,#42587,.T.); +#42585 = VERTEX_POINT('',#42586); +#42586 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#42587 = LINE('',#42588,#42589); +#42588 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#42589 = VECTOR('',#42590,1.); +#42590 = DIRECTION('',(0.,0.,-1.)); +#42591 = ORIENTED_EDGE('',*,*,#42592,.T.); +#42592 = EDGE_CURVE('',#42585,#35663,#42593,.T.); +#42593 = LINE('',#42594,#42595); +#42594 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#42595 = VECTOR('',#42596,1.); +#42596 = DIRECTION('',(0.,0.,-1.)); +#42597 = PLANE('',#42598); +#42598 = AXIS2_PLACEMENT_3D('',#42599,#42600,#42601); +#42599 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42600 = DIRECTION('',(0.,-1.,0.)); +#42601 = DIRECTION('',(-1.,0.,0.)); +#42602 = ADVANCED_FACE('',(#42603),#42621,.T.); +#42603 = FACE_BOUND('',#42604,.T.); +#42604 = EDGE_LOOP('',(#42605,#42613,#42614,#42615)); +#42605 = ORIENTED_EDGE('',*,*,#42606,.F.); +#42606 = EDGE_CURVE('',#42546,#42607,#42609,.T.); +#42607 = VERTEX_POINT('',#42608); +#42608 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#42609 = LINE('',#42610,#42611); +#42610 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#42611 = VECTOR('',#42612,1.); +#42612 = DIRECTION('',(0.,1.,0.)); +#42613 = ORIENTED_EDGE('',*,*,#42545,.T.); +#42614 = ORIENTED_EDGE('',*,*,#35198,.T.); +#42615 = ORIENTED_EDGE('',*,*,#42616,.F.); +#42616 = EDGE_CURVE('',#42607,#35199,#42617,.T.); +#42617 = LINE('',#42618,#42619); +#42618 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#42619 = VECTOR('',#42620,1.); +#42620 = DIRECTION('',(0.,0.,-1.)); +#42621 = PLANE('',#42622); +#42622 = AXIS2_PLACEMENT_3D('',#42623,#42624,#42625); +#42623 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#42624 = DIRECTION('',(1.,0.,0.)); +#42625 = DIRECTION('',(-0.,1.,0.)); +#42626 = ADVANCED_FACE('',(#42627),#42645,.T.); +#42627 = FACE_BOUND('',#42628,.F.); +#42628 = EDGE_LOOP('',(#42629,#42637,#42638,#42639)); +#42629 = ORIENTED_EDGE('',*,*,#42630,.F.); +#42630 = EDGE_CURVE('',#42585,#42631,#42633,.T.); +#42631 = VERTEX_POINT('',#42632); +#42632 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#42633 = LINE('',#42634,#42635); +#42634 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#42635 = VECTOR('',#42636,1.); +#42636 = DIRECTION('',(0.,1.,0.)); +#42637 = ORIENTED_EDGE('',*,*,#42592,.T.); +#42638 = ORIENTED_EDGE('',*,*,#35662,.T.); +#42639 = ORIENTED_EDGE('',*,*,#42640,.F.); +#42640 = EDGE_CURVE('',#42631,#35655,#42641,.T.); +#42641 = LINE('',#42642,#42643); +#42642 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#42643 = VECTOR('',#42644,1.); +#42644 = DIRECTION('',(0.,0.,-1.)); +#42645 = PLANE('',#42646); +#42646 = AXIS2_PLACEMENT_3D('',#42647,#42648,#42649); +#42647 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#42648 = DIRECTION('',(-1.,-0.,-0.)); +#42649 = DIRECTION('',(0.,-1.,0.)); +#42650 = ADVANCED_FACE('',(#42651),#42669,.F.); +#42651 = FACE_BOUND('',#42652,.F.); +#42652 = EDGE_LOOP('',(#42653,#42661,#42667,#42668)); +#42653 = ORIENTED_EDGE('',*,*,#42654,.T.); +#42654 = EDGE_CURVE('',#42607,#42655,#42657,.T.); +#42655 = VERTEX_POINT('',#42656); +#42656 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#42657 = LINE('',#42658,#42659); +#42658 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#42659 = VECTOR('',#42660,1.); +#42660 = DIRECTION('',(0.,1.,0.)); +#42661 = ORIENTED_EDGE('',*,*,#42662,.T.); +#42662 = EDGE_CURVE('',#42655,#35207,#42663,.T.); +#42663 = LINE('',#42664,#42665); +#42664 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#42665 = VECTOR('',#42666,1.); +#42666 = DIRECTION('',(0.,0.,-1.)); +#42667 = ORIENTED_EDGE('',*,*,#35206,.F.); +#42668 = ORIENTED_EDGE('',*,*,#42616,.F.); +#42669 = PLANE('',#42670); +#42670 = AXIS2_PLACEMENT_3D('',#42671,#42672,#42673); +#42671 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#42672 = DIRECTION('',(-1.,0.,0.)); +#42673 = DIRECTION('',(0.,0.,-1.)); +#42674 = ADVANCED_FACE('',(#42675),#42693,.F.); +#42675 = FACE_BOUND('',#42676,.T.); +#42676 = EDGE_LOOP('',(#42677,#42685,#42691,#42692)); +#42677 = ORIENTED_EDGE('',*,*,#42678,.T.); +#42678 = EDGE_CURVE('',#42631,#42679,#42681,.T.); +#42679 = VERTEX_POINT('',#42680); +#42680 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#42681 = LINE('',#42682,#42683); +#42682 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#42683 = VECTOR('',#42684,1.); +#42684 = DIRECTION('',(0.,1.,0.)); +#42685 = ORIENTED_EDGE('',*,*,#42686,.T.); +#42686 = EDGE_CURVE('',#42679,#35647,#42687,.T.); +#42687 = LINE('',#42688,#42689); +#42688 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#42689 = VECTOR('',#42690,1.); +#42690 = DIRECTION('',(0.,0.,-1.)); +#42691 = ORIENTED_EDGE('',*,*,#35654,.F.); +#42692 = ORIENTED_EDGE('',*,*,#42640,.F.); +#42693 = PLANE('',#42694); +#42694 = AXIS2_PLACEMENT_3D('',#42695,#42696,#42697); +#42695 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#42696 = DIRECTION('',(1.,0.,0.)); +#42697 = DIRECTION('',(0.,0.,1.)); +#42698 = ADVANCED_FACE('',(#42699),#42717,.T.); +#42699 = FACE_BOUND('',#42700,.T.); +#42700 = EDGE_LOOP('',(#42701,#42709,#42710,#42711)); +#42701 = ORIENTED_EDGE('',*,*,#42702,.F.); +#42702 = EDGE_CURVE('',#42655,#42703,#42705,.T.); +#42703 = VERTEX_POINT('',#42704); +#42704 = CARTESIAN_POINT('',(-5.265,-11.9,0.4)); +#42705 = LINE('',#42706,#42707); +#42706 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#42707 = VECTOR('',#42708,1.); +#42708 = DIRECTION('',(1.,0.,0.)); +#42709 = ORIENTED_EDGE('',*,*,#42662,.T.); +#42710 = ORIENTED_EDGE('',*,*,#35214,.T.); +#42711 = ORIENTED_EDGE('',*,*,#42712,.F.); +#42712 = EDGE_CURVE('',#42703,#35215,#42713,.T.); +#42713 = LINE('',#42714,#42715); +#42714 = CARTESIAN_POINT('',(-5.265,-11.9,0.4)); +#42715 = VECTOR('',#42716,1.); +#42716 = DIRECTION('',(0.,0.,-1.)); +#42717 = PLANE('',#42718); +#42718 = AXIS2_PLACEMENT_3D('',#42719,#42720,#42721); +#42719 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#42720 = DIRECTION('',(0.,-1.,0.)); +#42721 = DIRECTION('',(1.,0.,0.)); +#42722 = ADVANCED_FACE('',(#42723),#42741,.T.); +#42723 = FACE_BOUND('',#42724,.F.); +#42724 = EDGE_LOOP('',(#42725,#42733,#42734,#42735)); +#42725 = ORIENTED_EDGE('',*,*,#42726,.F.); +#42726 = EDGE_CURVE('',#42679,#42727,#42729,.T.); +#42727 = VERTEX_POINT('',#42728); +#42728 = CARTESIAN_POINT('',(5.265,-11.9,0.4)); +#42729 = LINE('',#42730,#42731); +#42730 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#42731 = VECTOR('',#42732,1.); +#42732 = DIRECTION('',(-1.,-0.,-0.)); +#42733 = ORIENTED_EDGE('',*,*,#42686,.T.); +#42734 = ORIENTED_EDGE('',*,*,#35646,.T.); +#42735 = ORIENTED_EDGE('',*,*,#42736,.F.); +#42736 = EDGE_CURVE('',#42727,#35639,#42737,.T.); +#42737 = LINE('',#42738,#42739); +#42738 = CARTESIAN_POINT('',(5.265,-11.9,0.4)); +#42739 = VECTOR('',#42740,1.); +#42740 = DIRECTION('',(0.,0.,-1.)); +#42741 = PLANE('',#42742); +#42742 = AXIS2_PLACEMENT_3D('',#42743,#42744,#42745); +#42743 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#42744 = DIRECTION('',(-0.,-1.,-0.)); +#42745 = DIRECTION('',(1.,-0.,0.)); +#42746 = ADVANCED_FACE('',(#42747),#42765,.T.); +#42747 = FACE_BOUND('',#42748,.T.); +#42748 = EDGE_LOOP('',(#42749,#42757,#42758,#42759)); +#42749 = ORIENTED_EDGE('',*,*,#42750,.T.); +#42750 = EDGE_CURVE('',#42751,#42703,#42753,.T.); +#42751 = VERTEX_POINT('',#42752); +#42752 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42753 = LINE('',#42754,#42755); +#42754 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42755 = VECTOR('',#42756,1.); +#42756 = DIRECTION('',(0.,1.,0.)); +#42757 = ORIENTED_EDGE('',*,*,#42712,.T.); +#42758 = ORIENTED_EDGE('',*,*,#35222,.F.); +#42759 = ORIENTED_EDGE('',*,*,#42760,.F.); +#42760 = EDGE_CURVE('',#42751,#35223,#42761,.T.); +#42761 = LINE('',#42762,#42763); +#42762 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42763 = VECTOR('',#42764,1.); +#42764 = DIRECTION('',(0.,0.,-1.)); +#42765 = PLANE('',#42766); +#42766 = AXIS2_PLACEMENT_3D('',#42767,#42768,#42769); +#42767 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42768 = DIRECTION('',(-1.,0.,0.)); +#42769 = DIRECTION('',(0.,0.,-1.)); +#42770 = ADVANCED_FACE('',(#42771),#42789,.T.); +#42771 = FACE_BOUND('',#42772,.F.); +#42772 = EDGE_LOOP('',(#42773,#42781,#42782,#42783)); +#42773 = ORIENTED_EDGE('',*,*,#42774,.T.); +#42774 = EDGE_CURVE('',#42775,#42727,#42777,.T.); +#42775 = VERTEX_POINT('',#42776); +#42776 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42777 = LINE('',#42778,#42779); +#42778 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42779 = VECTOR('',#42780,1.); +#42780 = DIRECTION('',(0.,1.,0.)); +#42781 = ORIENTED_EDGE('',*,*,#42736,.T.); +#42782 = ORIENTED_EDGE('',*,*,#35638,.F.); +#42783 = ORIENTED_EDGE('',*,*,#42784,.F.); +#42784 = EDGE_CURVE('',#42775,#35631,#42785,.T.); +#42785 = LINE('',#42786,#42787); +#42786 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42787 = VECTOR('',#42788,1.); +#42788 = DIRECTION('',(0.,0.,-1.)); +#42789 = PLANE('',#42790); +#42790 = AXIS2_PLACEMENT_3D('',#42791,#42792,#42793); +#42791 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42792 = DIRECTION('',(1.,0.,0.)); +#42793 = DIRECTION('',(0.,0.,1.)); +#42794 = ADVANCED_FACE('',(#42795),#42813,.T.); +#42795 = FACE_BOUND('',#42796,.T.); +#42796 = EDGE_LOOP('',(#42797,#42805,#42806,#42807)); +#42797 = ORIENTED_EDGE('',*,*,#42798,.F.); +#42798 = EDGE_CURVE('',#42751,#42799,#42801,.T.); +#42799 = VERTEX_POINT('',#42800); +#42800 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#42801 = LINE('',#42802,#42803); +#42802 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42803 = VECTOR('',#42804,1.); +#42804 = DIRECTION('',(0.,-1.,0.)); +#42805 = ORIENTED_EDGE('',*,*,#42760,.T.); +#42806 = ORIENTED_EDGE('',*,*,#35230,.T.); +#42807 = ORIENTED_EDGE('',*,*,#42808,.F.); +#42808 = EDGE_CURVE('',#42799,#35231,#42809,.T.); +#42809 = LINE('',#42810,#42811); +#42810 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#42811 = VECTOR('',#42812,1.); +#42812 = DIRECTION('',(0.,0.,-1.)); +#42813 = PLANE('',#42814); +#42814 = AXIS2_PLACEMENT_3D('',#42815,#42816,#42817); +#42815 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#42816 = DIRECTION('',(-1.,0.,0.)); +#42817 = DIRECTION('',(0.,-1.,0.)); +#42818 = ADVANCED_FACE('',(#42819),#42837,.T.); +#42819 = FACE_BOUND('',#42820,.F.); +#42820 = EDGE_LOOP('',(#42821,#42829,#42830,#42831)); +#42821 = ORIENTED_EDGE('',*,*,#42822,.F.); +#42822 = EDGE_CURVE('',#42775,#42823,#42825,.T.); +#42823 = VERTEX_POINT('',#42824); +#42824 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#42825 = LINE('',#42826,#42827); +#42826 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42827 = VECTOR('',#42828,1.); +#42828 = DIRECTION('',(-0.,-1.,-0.)); +#42829 = ORIENTED_EDGE('',*,*,#42784,.T.); +#42830 = ORIENTED_EDGE('',*,*,#35630,.T.); +#42831 = ORIENTED_EDGE('',*,*,#42832,.F.); +#42832 = EDGE_CURVE('',#42823,#35623,#42833,.T.); +#42833 = LINE('',#42834,#42835); +#42834 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#42835 = VECTOR('',#42836,1.); +#42836 = DIRECTION('',(0.,0.,-1.)); +#42837 = PLANE('',#42838); +#42838 = AXIS2_PLACEMENT_3D('',#42839,#42840,#42841); +#42839 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#42840 = DIRECTION('',(1.,0.,0.)); +#42841 = DIRECTION('',(-0.,1.,0.)); +#42842 = ADVANCED_FACE('',(#42843),#42868,.T.); +#42843 = FACE_BOUND('',#42844,.T.); +#42844 = EDGE_LOOP('',(#42845,#42846,#42854,#42860,#42861,#42867)); +#42845 = ORIENTED_EDGE('',*,*,#35238,.F.); +#42846 = ORIENTED_EDGE('',*,*,#42847,.F.); +#42847 = EDGE_CURVE('',#42848,#35239,#42850,.T.); +#42848 = VERTEX_POINT('',#42849); +#42849 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#42850 = LINE('',#42851,#42852); +#42851 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#42852 = VECTOR('',#42853,1.); +#42853 = DIRECTION('',(0.,0.,-1.)); +#42854 = ORIENTED_EDGE('',*,*,#42855,.F.); +#42855 = EDGE_CURVE('',#37226,#42848,#42856,.T.); +#42856 = LINE('',#42857,#42858); +#42857 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#42858 = VECTOR('',#42859,1.); +#42859 = DIRECTION('',(-0.,-0.,-1.)); +#42860 = ORIENTED_EDGE('',*,*,#37225,.T.); +#42861 = ORIENTED_EDGE('',*,*,#42862,.T.); +#42862 = EDGE_CURVE('',#37218,#42799,#42863,.T.); +#42863 = LINE('',#42864,#42865); +#42864 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#42865 = VECTOR('',#42866,1.); +#42866 = DIRECTION('',(-0.,-0.,-1.)); +#42867 = ORIENTED_EDGE('',*,*,#42808,.T.); +#42868 = PLANE('',#42869); +#42869 = AXIS2_PLACEMENT_3D('',#42870,#42871,#42872); +#42870 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42871 = DIRECTION('',(0.,-1.,0.)); +#42872 = DIRECTION('',(-1.,0.,0.)); +#42873 = ADVANCED_FACE('',(#42874),#42899,.T.); +#42874 = FACE_BOUND('',#42875,.T.); +#42875 = EDGE_LOOP('',(#42876,#42877,#42878,#42884,#42885,#42893)); +#42876 = ORIENTED_EDGE('',*,*,#35622,.F.); +#42877 = ORIENTED_EDGE('',*,*,#42832,.F.); +#42878 = ORIENTED_EDGE('',*,*,#42879,.F.); +#42879 = EDGE_CURVE('',#37482,#42823,#42880,.T.); +#42880 = LINE('',#42881,#42882); +#42881 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#42882 = VECTOR('',#42883,1.); +#42883 = DIRECTION('',(0.,0.,-1.)); +#42884 = ORIENTED_EDGE('',*,*,#37481,.T.); +#42885 = ORIENTED_EDGE('',*,*,#42886,.T.); +#42886 = EDGE_CURVE('',#37474,#42887,#42889,.T.); +#42887 = VERTEX_POINT('',#42888); +#42888 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#42889 = LINE('',#42890,#42891); +#42890 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#42891 = VECTOR('',#42892,1.); +#42892 = DIRECTION('',(0.,0.,-1.)); +#42893 = ORIENTED_EDGE('',*,*,#42894,.T.); +#42894 = EDGE_CURVE('',#42887,#35615,#42895,.T.); +#42895 = LINE('',#42896,#42897); +#42896 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#42897 = VECTOR('',#42898,1.); +#42898 = DIRECTION('',(0.,0.,-1.)); +#42899 = PLANE('',#42900); +#42900 = AXIS2_PLACEMENT_3D('',#42901,#42902,#42903); +#42901 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#42902 = DIRECTION('',(0.,-1.,0.)); +#42903 = DIRECTION('',(-1.,0.,0.)); +#42904 = ADVANCED_FACE('',(#42905),#42923,.T.); +#42905 = FACE_BOUND('',#42906,.T.); +#42906 = EDGE_LOOP('',(#42907,#42915,#42916,#42917)); +#42907 = ORIENTED_EDGE('',*,*,#42908,.F.); +#42908 = EDGE_CURVE('',#42848,#42909,#42911,.T.); +#42909 = VERTEX_POINT('',#42910); +#42910 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#42911 = LINE('',#42912,#42913); +#42912 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#42913 = VECTOR('',#42914,1.); +#42914 = DIRECTION('',(0.,1.,0.)); +#42915 = ORIENTED_EDGE('',*,*,#42847,.T.); +#42916 = ORIENTED_EDGE('',*,*,#35246,.T.); +#42917 = ORIENTED_EDGE('',*,*,#42918,.F.); +#42918 = EDGE_CURVE('',#42909,#35247,#42919,.T.); +#42919 = LINE('',#42920,#42921); +#42920 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#42921 = VECTOR('',#42922,1.); +#42922 = DIRECTION('',(0.,0.,-1.)); +#42923 = PLANE('',#42924); +#42924 = AXIS2_PLACEMENT_3D('',#42925,#42926,#42927); +#42925 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#42926 = DIRECTION('',(1.,0.,0.)); +#42927 = DIRECTION('',(-0.,1.,0.)); +#42928 = ADVANCED_FACE('',(#42929),#42947,.T.); +#42929 = FACE_BOUND('',#42930,.F.); +#42930 = EDGE_LOOP('',(#42931,#42939,#42940,#42941)); +#42931 = ORIENTED_EDGE('',*,*,#42932,.F.); +#42932 = EDGE_CURVE('',#42887,#42933,#42935,.T.); +#42933 = VERTEX_POINT('',#42934); +#42934 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#42935 = LINE('',#42936,#42937); +#42936 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#42937 = VECTOR('',#42938,1.); +#42938 = DIRECTION('',(0.,1.,0.)); +#42939 = ORIENTED_EDGE('',*,*,#42894,.T.); +#42940 = ORIENTED_EDGE('',*,*,#35614,.T.); +#42941 = ORIENTED_EDGE('',*,*,#42942,.F.); +#42942 = EDGE_CURVE('',#42933,#35607,#42943,.T.); +#42943 = LINE('',#42944,#42945); +#42944 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#42945 = VECTOR('',#42946,1.); +#42946 = DIRECTION('',(0.,0.,-1.)); +#42947 = PLANE('',#42948); +#42948 = AXIS2_PLACEMENT_3D('',#42949,#42950,#42951); +#42949 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#42950 = DIRECTION('',(-1.,-0.,-0.)); +#42951 = DIRECTION('',(0.,-1.,0.)); +#42952 = ADVANCED_FACE('',(#42953),#42971,.F.); +#42953 = FACE_BOUND('',#42954,.F.); +#42954 = EDGE_LOOP('',(#42955,#42963,#42969,#42970)); +#42955 = ORIENTED_EDGE('',*,*,#42956,.T.); +#42956 = EDGE_CURVE('',#42909,#42957,#42959,.T.); +#42957 = VERTEX_POINT('',#42958); +#42958 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#42959 = LINE('',#42960,#42961); +#42960 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#42961 = VECTOR('',#42962,1.); +#42962 = DIRECTION('',(0.,1.,0.)); +#42963 = ORIENTED_EDGE('',*,*,#42964,.T.); +#42964 = EDGE_CURVE('',#42957,#35255,#42965,.T.); +#42965 = LINE('',#42966,#42967); +#42966 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#42967 = VECTOR('',#42968,1.); +#42968 = DIRECTION('',(0.,0.,-1.)); +#42969 = ORIENTED_EDGE('',*,*,#35254,.F.); +#42970 = ORIENTED_EDGE('',*,*,#42918,.F.); +#42971 = PLANE('',#42972); +#42972 = AXIS2_PLACEMENT_3D('',#42973,#42974,#42975); +#42973 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#42974 = DIRECTION('',(-1.,0.,0.)); +#42975 = DIRECTION('',(0.,0.,-1.)); +#42976 = ADVANCED_FACE('',(#42977),#42995,.F.); +#42977 = FACE_BOUND('',#42978,.T.); +#42978 = EDGE_LOOP('',(#42979,#42987,#42993,#42994)); +#42979 = ORIENTED_EDGE('',*,*,#42980,.T.); +#42980 = EDGE_CURVE('',#42933,#42981,#42983,.T.); +#42981 = VERTEX_POINT('',#42982); +#42982 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#42983 = LINE('',#42984,#42985); +#42984 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#42985 = VECTOR('',#42986,1.); +#42986 = DIRECTION('',(0.,1.,0.)); +#42987 = ORIENTED_EDGE('',*,*,#42988,.T.); +#42988 = EDGE_CURVE('',#42981,#35599,#42989,.T.); +#42989 = LINE('',#42990,#42991); +#42990 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#42991 = VECTOR('',#42992,1.); +#42992 = DIRECTION('',(0.,0.,-1.)); +#42993 = ORIENTED_EDGE('',*,*,#35606,.F.); +#42994 = ORIENTED_EDGE('',*,*,#42942,.F.); +#42995 = PLANE('',#42996); +#42996 = AXIS2_PLACEMENT_3D('',#42997,#42998,#42999); +#42997 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#42998 = DIRECTION('',(1.,0.,0.)); +#42999 = DIRECTION('',(0.,0.,1.)); +#43000 = ADVANCED_FACE('',(#43001),#43019,.T.); +#43001 = FACE_BOUND('',#43002,.T.); +#43002 = EDGE_LOOP('',(#43003,#43011,#43012,#43013)); +#43003 = ORIENTED_EDGE('',*,*,#43004,.F.); +#43004 = EDGE_CURVE('',#42957,#43005,#43007,.T.); +#43005 = VERTEX_POINT('',#43006); +#43006 = CARTESIAN_POINT('',(-3.995,-11.9,0.4)); +#43007 = LINE('',#43008,#43009); +#43008 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#43009 = VECTOR('',#43010,1.); +#43010 = DIRECTION('',(1.,0.,0.)); +#43011 = ORIENTED_EDGE('',*,*,#42964,.T.); +#43012 = ORIENTED_EDGE('',*,*,#35262,.T.); +#43013 = ORIENTED_EDGE('',*,*,#43014,.F.); +#43014 = EDGE_CURVE('',#43005,#35263,#43015,.T.); +#43015 = LINE('',#43016,#43017); +#43016 = CARTESIAN_POINT('',(-3.995,-11.9,0.4)); +#43017 = VECTOR('',#43018,1.); +#43018 = DIRECTION('',(0.,0.,-1.)); +#43019 = PLANE('',#43020); +#43020 = AXIS2_PLACEMENT_3D('',#43021,#43022,#43023); +#43021 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#43022 = DIRECTION('',(0.,-1.,0.)); +#43023 = DIRECTION('',(1.,0.,0.)); +#43024 = ADVANCED_FACE('',(#43025),#43043,.T.); +#43025 = FACE_BOUND('',#43026,.F.); +#43026 = EDGE_LOOP('',(#43027,#43035,#43036,#43037)); +#43027 = ORIENTED_EDGE('',*,*,#43028,.F.); +#43028 = EDGE_CURVE('',#42981,#43029,#43031,.T.); +#43029 = VERTEX_POINT('',#43030); +#43030 = CARTESIAN_POINT('',(3.995,-11.9,0.4)); +#43031 = LINE('',#43032,#43033); +#43032 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#43033 = VECTOR('',#43034,1.); +#43034 = DIRECTION('',(-1.,-0.,-0.)); +#43035 = ORIENTED_EDGE('',*,*,#42988,.T.); +#43036 = ORIENTED_EDGE('',*,*,#35598,.T.); +#43037 = ORIENTED_EDGE('',*,*,#43038,.F.); +#43038 = EDGE_CURVE('',#43029,#35591,#43039,.T.); +#43039 = LINE('',#43040,#43041); +#43040 = CARTESIAN_POINT('',(3.995,-11.9,0.4)); +#43041 = VECTOR('',#43042,1.); +#43042 = DIRECTION('',(0.,0.,-1.)); +#43043 = PLANE('',#43044); +#43044 = AXIS2_PLACEMENT_3D('',#43045,#43046,#43047); +#43045 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#43046 = DIRECTION('',(-0.,-1.,-0.)); +#43047 = DIRECTION('',(1.,-0.,0.)); +#43048 = ADVANCED_FACE('',(#43049),#43067,.T.); +#43049 = FACE_BOUND('',#43050,.T.); +#43050 = EDGE_LOOP('',(#43051,#43059,#43060,#43061)); +#43051 = ORIENTED_EDGE('',*,*,#43052,.T.); +#43052 = EDGE_CURVE('',#43053,#43005,#43055,.T.); +#43053 = VERTEX_POINT('',#43054); +#43054 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43055 = LINE('',#43056,#43057); +#43056 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43057 = VECTOR('',#43058,1.); +#43058 = DIRECTION('',(0.,1.,0.)); +#43059 = ORIENTED_EDGE('',*,*,#43014,.T.); +#43060 = ORIENTED_EDGE('',*,*,#35270,.F.); +#43061 = ORIENTED_EDGE('',*,*,#43062,.F.); +#43062 = EDGE_CURVE('',#43053,#35271,#43063,.T.); +#43063 = LINE('',#43064,#43065); +#43064 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43065 = VECTOR('',#43066,1.); +#43066 = DIRECTION('',(0.,0.,-1.)); +#43067 = PLANE('',#43068); +#43068 = AXIS2_PLACEMENT_3D('',#43069,#43070,#43071); +#43069 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43070 = DIRECTION('',(-1.,0.,0.)); +#43071 = DIRECTION('',(0.,0.,-1.)); +#43072 = ADVANCED_FACE('',(#43073),#43091,.T.); +#43073 = FACE_BOUND('',#43074,.F.); +#43074 = EDGE_LOOP('',(#43075,#43083,#43084,#43085)); +#43075 = ORIENTED_EDGE('',*,*,#43076,.T.); +#43076 = EDGE_CURVE('',#43077,#43029,#43079,.T.); +#43077 = VERTEX_POINT('',#43078); +#43078 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43079 = LINE('',#43080,#43081); +#43080 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43081 = VECTOR('',#43082,1.); +#43082 = DIRECTION('',(0.,1.,0.)); +#43083 = ORIENTED_EDGE('',*,*,#43038,.T.); +#43084 = ORIENTED_EDGE('',*,*,#35590,.F.); +#43085 = ORIENTED_EDGE('',*,*,#43086,.F.); +#43086 = EDGE_CURVE('',#43077,#35583,#43087,.T.); +#43087 = LINE('',#43088,#43089); +#43088 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43089 = VECTOR('',#43090,1.); +#43090 = DIRECTION('',(0.,0.,-1.)); +#43091 = PLANE('',#43092); +#43092 = AXIS2_PLACEMENT_3D('',#43093,#43094,#43095); +#43093 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43094 = DIRECTION('',(1.,0.,0.)); +#43095 = DIRECTION('',(0.,0.,1.)); +#43096 = ADVANCED_FACE('',(#43097),#43115,.T.); +#43097 = FACE_BOUND('',#43098,.T.); +#43098 = EDGE_LOOP('',(#43099,#43107,#43108,#43109)); +#43099 = ORIENTED_EDGE('',*,*,#43100,.F.); +#43100 = EDGE_CURVE('',#43053,#43101,#43103,.T.); +#43101 = VERTEX_POINT('',#43102); +#43102 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#43103 = LINE('',#43104,#43105); +#43104 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43105 = VECTOR('',#43106,1.); +#43106 = DIRECTION('',(0.,-1.,0.)); +#43107 = ORIENTED_EDGE('',*,*,#43062,.T.); +#43108 = ORIENTED_EDGE('',*,*,#35278,.T.); +#43109 = ORIENTED_EDGE('',*,*,#43110,.F.); +#43110 = EDGE_CURVE('',#43101,#35279,#43111,.T.); +#43111 = LINE('',#43112,#43113); +#43112 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#43113 = VECTOR('',#43114,1.); +#43114 = DIRECTION('',(0.,0.,-1.)); +#43115 = PLANE('',#43116); +#43116 = AXIS2_PLACEMENT_3D('',#43117,#43118,#43119); +#43117 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#43118 = DIRECTION('',(-1.,0.,0.)); +#43119 = DIRECTION('',(0.,-1.,0.)); +#43120 = ADVANCED_FACE('',(#43121),#43139,.T.); +#43121 = FACE_BOUND('',#43122,.F.); +#43122 = EDGE_LOOP('',(#43123,#43131,#43132,#43133)); +#43123 = ORIENTED_EDGE('',*,*,#43124,.F.); +#43124 = EDGE_CURVE('',#43077,#43125,#43127,.T.); +#43125 = VERTEX_POINT('',#43126); +#43126 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#43127 = LINE('',#43128,#43129); +#43128 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43129 = VECTOR('',#43130,1.); +#43130 = DIRECTION('',(-0.,-1.,-0.)); +#43131 = ORIENTED_EDGE('',*,*,#43086,.T.); +#43132 = ORIENTED_EDGE('',*,*,#35582,.T.); +#43133 = ORIENTED_EDGE('',*,*,#43134,.F.); +#43134 = EDGE_CURVE('',#43125,#35575,#43135,.T.); +#43135 = LINE('',#43136,#43137); +#43136 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#43137 = VECTOR('',#43138,1.); +#43138 = DIRECTION('',(0.,0.,-1.)); +#43139 = PLANE('',#43140); +#43140 = AXIS2_PLACEMENT_3D('',#43141,#43142,#43143); +#43141 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#43142 = DIRECTION('',(1.,0.,0.)); +#43143 = DIRECTION('',(-0.,1.,0.)); +#43144 = ADVANCED_FACE('',(#43145),#43170,.T.); +#43145 = FACE_BOUND('',#43146,.T.); +#43146 = EDGE_LOOP('',(#43147,#43148,#43156,#43162,#43163,#43169)); +#43147 = ORIENTED_EDGE('',*,*,#35286,.F.); +#43148 = ORIENTED_EDGE('',*,*,#43149,.F.); +#43149 = EDGE_CURVE('',#43150,#35287,#43152,.T.); +#43150 = VERTEX_POINT('',#43151); +#43151 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#43152 = LINE('',#43153,#43154); +#43153 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#43154 = VECTOR('',#43155,1.); +#43155 = DIRECTION('',(0.,0.,-1.)); +#43156 = ORIENTED_EDGE('',*,*,#43157,.F.); +#43157 = EDGE_CURVE('',#37258,#43150,#43158,.T.); +#43158 = LINE('',#43159,#43160); +#43159 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#43160 = VECTOR('',#43161,1.); +#43161 = DIRECTION('',(-0.,-0.,-1.)); +#43162 = ORIENTED_EDGE('',*,*,#37257,.T.); +#43163 = ORIENTED_EDGE('',*,*,#43164,.T.); +#43164 = EDGE_CURVE('',#37250,#43101,#43165,.T.); +#43165 = LINE('',#43166,#43167); +#43166 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#43167 = VECTOR('',#43168,1.); +#43168 = DIRECTION('',(-0.,-0.,-1.)); +#43169 = ORIENTED_EDGE('',*,*,#43110,.T.); +#43170 = PLANE('',#43171); +#43171 = AXIS2_PLACEMENT_3D('',#43172,#43173,#43174); +#43172 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43173 = DIRECTION('',(0.,-1.,0.)); +#43174 = DIRECTION('',(-1.,0.,0.)); +#43175 = ADVANCED_FACE('',(#43176),#43201,.T.); +#43176 = FACE_BOUND('',#43177,.T.); +#43177 = EDGE_LOOP('',(#43178,#43179,#43180,#43186,#43187,#43195)); +#43178 = ORIENTED_EDGE('',*,*,#35574,.F.); +#43179 = ORIENTED_EDGE('',*,*,#43134,.F.); +#43180 = ORIENTED_EDGE('',*,*,#43181,.F.); +#43181 = EDGE_CURVE('',#37450,#43125,#43182,.T.); +#43182 = LINE('',#43183,#43184); +#43183 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#43184 = VECTOR('',#43185,1.); +#43185 = DIRECTION('',(0.,0.,-1.)); +#43186 = ORIENTED_EDGE('',*,*,#37449,.T.); +#43187 = ORIENTED_EDGE('',*,*,#43188,.T.); +#43188 = EDGE_CURVE('',#37442,#43189,#43191,.T.); +#43189 = VERTEX_POINT('',#43190); +#43190 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#43191 = LINE('',#43192,#43193); +#43192 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#43193 = VECTOR('',#43194,1.); +#43194 = DIRECTION('',(0.,0.,-1.)); +#43195 = ORIENTED_EDGE('',*,*,#43196,.T.); +#43196 = EDGE_CURVE('',#43189,#35567,#43197,.T.); +#43197 = LINE('',#43198,#43199); +#43198 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#43199 = VECTOR('',#43200,1.); +#43200 = DIRECTION('',(0.,0.,-1.)); +#43201 = PLANE('',#43202); +#43202 = AXIS2_PLACEMENT_3D('',#43203,#43204,#43205); +#43203 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43204 = DIRECTION('',(0.,-1.,0.)); +#43205 = DIRECTION('',(-1.,0.,0.)); +#43206 = ADVANCED_FACE('',(#43207),#43225,.T.); +#43207 = FACE_BOUND('',#43208,.T.); +#43208 = EDGE_LOOP('',(#43209,#43217,#43218,#43219)); +#43209 = ORIENTED_EDGE('',*,*,#43210,.F.); +#43210 = EDGE_CURVE('',#43150,#43211,#43213,.T.); +#43211 = VERTEX_POINT('',#43212); +#43212 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#43213 = LINE('',#43214,#43215); +#43214 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#43215 = VECTOR('',#43216,1.); +#43216 = DIRECTION('',(0.,1.,0.)); +#43217 = ORIENTED_EDGE('',*,*,#43149,.T.); +#43218 = ORIENTED_EDGE('',*,*,#35294,.T.); +#43219 = ORIENTED_EDGE('',*,*,#43220,.F.); +#43220 = EDGE_CURVE('',#43211,#35295,#43221,.T.); +#43221 = LINE('',#43222,#43223); +#43222 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#43223 = VECTOR('',#43224,1.); +#43224 = DIRECTION('',(0.,0.,-1.)); +#43225 = PLANE('',#43226); +#43226 = AXIS2_PLACEMENT_3D('',#43227,#43228,#43229); +#43227 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#43228 = DIRECTION('',(1.,0.,0.)); +#43229 = DIRECTION('',(-0.,1.,0.)); +#43230 = ADVANCED_FACE('',(#43231),#43249,.T.); +#43231 = FACE_BOUND('',#43232,.F.); +#43232 = EDGE_LOOP('',(#43233,#43241,#43242,#43243)); +#43233 = ORIENTED_EDGE('',*,*,#43234,.F.); +#43234 = EDGE_CURVE('',#43189,#43235,#43237,.T.); +#43235 = VERTEX_POINT('',#43236); +#43236 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#43237 = LINE('',#43238,#43239); +#43238 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#43239 = VECTOR('',#43240,1.); +#43240 = DIRECTION('',(0.,1.,0.)); +#43241 = ORIENTED_EDGE('',*,*,#43196,.T.); +#43242 = ORIENTED_EDGE('',*,*,#35566,.T.); +#43243 = ORIENTED_EDGE('',*,*,#43244,.F.); +#43244 = EDGE_CURVE('',#43235,#35559,#43245,.T.); +#43245 = LINE('',#43246,#43247); +#43246 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#43247 = VECTOR('',#43248,1.); +#43248 = DIRECTION('',(0.,0.,-1.)); +#43249 = PLANE('',#43250); +#43250 = AXIS2_PLACEMENT_3D('',#43251,#43252,#43253); +#43251 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#43252 = DIRECTION('',(-1.,-0.,-0.)); +#43253 = DIRECTION('',(0.,-1.,0.)); +#43254 = ADVANCED_FACE('',(#43255),#43273,.F.); +#43255 = FACE_BOUND('',#43256,.F.); +#43256 = EDGE_LOOP('',(#43257,#43265,#43271,#43272)); +#43257 = ORIENTED_EDGE('',*,*,#43258,.T.); +#43258 = EDGE_CURVE('',#43211,#43259,#43261,.T.); +#43259 = VERTEX_POINT('',#43260); +#43260 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#43261 = LINE('',#43262,#43263); +#43262 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#43263 = VECTOR('',#43264,1.); +#43264 = DIRECTION('',(0.,1.,0.)); +#43265 = ORIENTED_EDGE('',*,*,#43266,.T.); +#43266 = EDGE_CURVE('',#43259,#35303,#43267,.T.); +#43267 = LINE('',#43268,#43269); +#43268 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#43269 = VECTOR('',#43270,1.); +#43270 = DIRECTION('',(0.,0.,-1.)); +#43271 = ORIENTED_EDGE('',*,*,#35302,.F.); +#43272 = ORIENTED_EDGE('',*,*,#43220,.F.); +#43273 = PLANE('',#43274); +#43274 = AXIS2_PLACEMENT_3D('',#43275,#43276,#43277); +#43275 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#43276 = DIRECTION('',(-1.,0.,0.)); +#43277 = DIRECTION('',(0.,0.,-1.)); +#43278 = ADVANCED_FACE('',(#43279),#43297,.F.); +#43279 = FACE_BOUND('',#43280,.T.); +#43280 = EDGE_LOOP('',(#43281,#43289,#43295,#43296)); +#43281 = ORIENTED_EDGE('',*,*,#43282,.T.); +#43282 = EDGE_CURVE('',#43235,#43283,#43285,.T.); +#43283 = VERTEX_POINT('',#43284); +#43284 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#43285 = LINE('',#43286,#43287); +#43286 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#43287 = VECTOR('',#43288,1.); +#43288 = DIRECTION('',(0.,1.,0.)); +#43289 = ORIENTED_EDGE('',*,*,#43290,.T.); +#43290 = EDGE_CURVE('',#43283,#35551,#43291,.T.); +#43291 = LINE('',#43292,#43293); +#43292 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#43293 = VECTOR('',#43294,1.); +#43294 = DIRECTION('',(0.,0.,-1.)); +#43295 = ORIENTED_EDGE('',*,*,#35558,.F.); +#43296 = ORIENTED_EDGE('',*,*,#43244,.F.); +#43297 = PLANE('',#43298); +#43298 = AXIS2_PLACEMENT_3D('',#43299,#43300,#43301); +#43299 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#43300 = DIRECTION('',(1.,0.,0.)); +#43301 = DIRECTION('',(0.,0.,1.)); +#43302 = ADVANCED_FACE('',(#43303),#43321,.T.); +#43303 = FACE_BOUND('',#43304,.T.); +#43304 = EDGE_LOOP('',(#43305,#43313,#43314,#43315)); +#43305 = ORIENTED_EDGE('',*,*,#43306,.F.); +#43306 = EDGE_CURVE('',#43259,#43307,#43309,.T.); +#43307 = VERTEX_POINT('',#43308); +#43308 = CARTESIAN_POINT('',(-2.725,-11.9,0.4)); +#43309 = LINE('',#43310,#43311); +#43310 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#43311 = VECTOR('',#43312,1.); +#43312 = DIRECTION('',(1.,0.,0.)); +#43313 = ORIENTED_EDGE('',*,*,#43266,.T.); +#43314 = ORIENTED_EDGE('',*,*,#35310,.T.); +#43315 = ORIENTED_EDGE('',*,*,#43316,.F.); +#43316 = EDGE_CURVE('',#43307,#35311,#43317,.T.); +#43317 = LINE('',#43318,#43319); +#43318 = CARTESIAN_POINT('',(-2.725,-11.9,0.4)); +#43319 = VECTOR('',#43320,1.); +#43320 = DIRECTION('',(0.,0.,-1.)); +#43321 = PLANE('',#43322); +#43322 = AXIS2_PLACEMENT_3D('',#43323,#43324,#43325); +#43323 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#43324 = DIRECTION('',(0.,-1.,0.)); +#43325 = DIRECTION('',(1.,0.,0.)); +#43326 = ADVANCED_FACE('',(#43327),#43345,.T.); +#43327 = FACE_BOUND('',#43328,.F.); +#43328 = EDGE_LOOP('',(#43329,#43337,#43338,#43339)); +#43329 = ORIENTED_EDGE('',*,*,#43330,.F.); +#43330 = EDGE_CURVE('',#43283,#43331,#43333,.T.); +#43331 = VERTEX_POINT('',#43332); +#43332 = CARTESIAN_POINT('',(2.725,-11.9,0.4)); +#43333 = LINE('',#43334,#43335); +#43334 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#43335 = VECTOR('',#43336,1.); +#43336 = DIRECTION('',(-1.,-0.,-0.)); +#43337 = ORIENTED_EDGE('',*,*,#43290,.T.); +#43338 = ORIENTED_EDGE('',*,*,#35550,.T.); +#43339 = ORIENTED_EDGE('',*,*,#43340,.F.); +#43340 = EDGE_CURVE('',#43331,#35543,#43341,.T.); +#43341 = LINE('',#43342,#43343); +#43342 = CARTESIAN_POINT('',(2.725,-11.9,0.4)); +#43343 = VECTOR('',#43344,1.); +#43344 = DIRECTION('',(0.,0.,-1.)); +#43345 = PLANE('',#43346); +#43346 = AXIS2_PLACEMENT_3D('',#43347,#43348,#43349); +#43347 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#43348 = DIRECTION('',(-0.,-1.,-0.)); +#43349 = DIRECTION('',(1.,-0.,0.)); +#43350 = ADVANCED_FACE('',(#43351),#43369,.T.); +#43351 = FACE_BOUND('',#43352,.T.); +#43352 = EDGE_LOOP('',(#43353,#43361,#43362,#43363)); +#43353 = ORIENTED_EDGE('',*,*,#43354,.T.); +#43354 = EDGE_CURVE('',#43355,#43307,#43357,.T.); +#43355 = VERTEX_POINT('',#43356); +#43356 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43357 = LINE('',#43358,#43359); +#43358 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43359 = VECTOR('',#43360,1.); +#43360 = DIRECTION('',(0.,1.,0.)); +#43361 = ORIENTED_EDGE('',*,*,#43316,.T.); +#43362 = ORIENTED_EDGE('',*,*,#35318,.F.); +#43363 = ORIENTED_EDGE('',*,*,#43364,.F.); +#43364 = EDGE_CURVE('',#43355,#35319,#43365,.T.); +#43365 = LINE('',#43366,#43367); +#43366 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43367 = VECTOR('',#43368,1.); +#43368 = DIRECTION('',(0.,0.,-1.)); +#43369 = PLANE('',#43370); +#43370 = AXIS2_PLACEMENT_3D('',#43371,#43372,#43373); +#43371 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43372 = DIRECTION('',(-1.,0.,0.)); +#43373 = DIRECTION('',(0.,0.,-1.)); +#43374 = ADVANCED_FACE('',(#43375),#43393,.T.); +#43375 = FACE_BOUND('',#43376,.F.); +#43376 = EDGE_LOOP('',(#43377,#43385,#43386,#43387)); +#43377 = ORIENTED_EDGE('',*,*,#43378,.T.); +#43378 = EDGE_CURVE('',#43379,#43331,#43381,.T.); +#43379 = VERTEX_POINT('',#43380); +#43380 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43381 = LINE('',#43382,#43383); +#43382 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43383 = VECTOR('',#43384,1.); +#43384 = DIRECTION('',(0.,1.,0.)); +#43385 = ORIENTED_EDGE('',*,*,#43340,.T.); +#43386 = ORIENTED_EDGE('',*,*,#35542,.F.); +#43387 = ORIENTED_EDGE('',*,*,#43388,.F.); +#43388 = EDGE_CURVE('',#43379,#35535,#43389,.T.); +#43389 = LINE('',#43390,#43391); +#43390 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43391 = VECTOR('',#43392,1.); +#43392 = DIRECTION('',(0.,0.,-1.)); +#43393 = PLANE('',#43394); +#43394 = AXIS2_PLACEMENT_3D('',#43395,#43396,#43397); +#43395 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43396 = DIRECTION('',(1.,0.,0.)); +#43397 = DIRECTION('',(0.,0.,1.)); +#43398 = ADVANCED_FACE('',(#43399),#43417,.T.); +#43399 = FACE_BOUND('',#43400,.T.); +#43400 = EDGE_LOOP('',(#43401,#43409,#43410,#43411)); +#43401 = ORIENTED_EDGE('',*,*,#43402,.F.); +#43402 = EDGE_CURVE('',#43355,#43403,#43405,.T.); +#43403 = VERTEX_POINT('',#43404); +#43404 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#43405 = LINE('',#43406,#43407); +#43406 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43407 = VECTOR('',#43408,1.); +#43408 = DIRECTION('',(0.,-1.,0.)); +#43409 = ORIENTED_EDGE('',*,*,#43364,.T.); +#43410 = ORIENTED_EDGE('',*,*,#35326,.T.); +#43411 = ORIENTED_EDGE('',*,*,#43412,.F.); +#43412 = EDGE_CURVE('',#43403,#35327,#43413,.T.); +#43413 = LINE('',#43414,#43415); +#43414 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#43415 = VECTOR('',#43416,1.); +#43416 = DIRECTION('',(0.,0.,-1.)); +#43417 = PLANE('',#43418); +#43418 = AXIS2_PLACEMENT_3D('',#43419,#43420,#43421); +#43419 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#43420 = DIRECTION('',(-1.,0.,0.)); +#43421 = DIRECTION('',(0.,-1.,0.)); +#43422 = ADVANCED_FACE('',(#43423),#43441,.T.); +#43423 = FACE_BOUND('',#43424,.F.); +#43424 = EDGE_LOOP('',(#43425,#43433,#43434,#43435)); +#43425 = ORIENTED_EDGE('',*,*,#43426,.F.); +#43426 = EDGE_CURVE('',#43379,#43427,#43429,.T.); +#43427 = VERTEX_POINT('',#43428); +#43428 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#43429 = LINE('',#43430,#43431); +#43430 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43431 = VECTOR('',#43432,1.); +#43432 = DIRECTION('',(-0.,-1.,-0.)); +#43433 = ORIENTED_EDGE('',*,*,#43388,.T.); +#43434 = ORIENTED_EDGE('',*,*,#35534,.T.); +#43435 = ORIENTED_EDGE('',*,*,#43436,.F.); +#43436 = EDGE_CURVE('',#43427,#35527,#43437,.T.); +#43437 = LINE('',#43438,#43439); +#43438 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#43439 = VECTOR('',#43440,1.); +#43440 = DIRECTION('',(0.,0.,-1.)); +#43441 = PLANE('',#43442); +#43442 = AXIS2_PLACEMENT_3D('',#43443,#43444,#43445); +#43443 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#43444 = DIRECTION('',(1.,0.,0.)); +#43445 = DIRECTION('',(-0.,1.,0.)); +#43446 = ADVANCED_FACE('',(#43447),#43472,.T.); +#43447 = FACE_BOUND('',#43448,.T.); +#43448 = EDGE_LOOP('',(#43449,#43450,#43458,#43464,#43465,#43471)); +#43449 = ORIENTED_EDGE('',*,*,#35334,.F.); +#43450 = ORIENTED_EDGE('',*,*,#43451,.F.); +#43451 = EDGE_CURVE('',#43452,#35335,#43454,.T.); +#43452 = VERTEX_POINT('',#43453); +#43453 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#43454 = LINE('',#43455,#43456); +#43455 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#43456 = VECTOR('',#43457,1.); +#43457 = DIRECTION('',(0.,0.,-1.)); +#43458 = ORIENTED_EDGE('',*,*,#43459,.F.); +#43459 = EDGE_CURVE('',#37290,#43452,#43460,.T.); +#43460 = LINE('',#43461,#43462); +#43461 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#43462 = VECTOR('',#43463,1.); +#43463 = DIRECTION('',(-0.,-0.,-1.)); +#43464 = ORIENTED_EDGE('',*,*,#37289,.T.); +#43465 = ORIENTED_EDGE('',*,*,#43466,.T.); +#43466 = EDGE_CURVE('',#37282,#43403,#43467,.T.); +#43467 = LINE('',#43468,#43469); +#43468 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#43469 = VECTOR('',#43470,1.); +#43470 = DIRECTION('',(-0.,-0.,-1.)); +#43471 = ORIENTED_EDGE('',*,*,#43412,.T.); +#43472 = PLANE('',#43473); +#43473 = AXIS2_PLACEMENT_3D('',#43474,#43475,#43476); +#43474 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43475 = DIRECTION('',(0.,-1.,0.)); +#43476 = DIRECTION('',(-1.,0.,0.)); +#43477 = ADVANCED_FACE('',(#43478),#43503,.T.); +#43478 = FACE_BOUND('',#43479,.T.); +#43479 = EDGE_LOOP('',(#43480,#43481,#43482,#43488,#43489,#43497)); +#43480 = ORIENTED_EDGE('',*,*,#35526,.F.); +#43481 = ORIENTED_EDGE('',*,*,#43436,.F.); +#43482 = ORIENTED_EDGE('',*,*,#43483,.F.); +#43483 = EDGE_CURVE('',#37418,#43427,#43484,.T.); +#43484 = LINE('',#43485,#43486); +#43485 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#43486 = VECTOR('',#43487,1.); +#43487 = DIRECTION('',(0.,0.,-1.)); +#43488 = ORIENTED_EDGE('',*,*,#37417,.T.); +#43489 = ORIENTED_EDGE('',*,*,#43490,.T.); +#43490 = EDGE_CURVE('',#37410,#43491,#43493,.T.); +#43491 = VERTEX_POINT('',#43492); +#43492 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#43493 = LINE('',#43494,#43495); +#43494 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#43495 = VECTOR('',#43496,1.); +#43496 = DIRECTION('',(0.,0.,-1.)); +#43497 = ORIENTED_EDGE('',*,*,#43498,.T.); +#43498 = EDGE_CURVE('',#43491,#35519,#43499,.T.); +#43499 = LINE('',#43500,#43501); +#43500 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#43501 = VECTOR('',#43502,1.); +#43502 = DIRECTION('',(0.,0.,-1.)); +#43503 = PLANE('',#43504); +#43504 = AXIS2_PLACEMENT_3D('',#43505,#43506,#43507); +#43505 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43506 = DIRECTION('',(0.,-1.,0.)); +#43507 = DIRECTION('',(-1.,0.,0.)); +#43508 = ADVANCED_FACE('',(#43509),#43527,.T.); +#43509 = FACE_BOUND('',#43510,.T.); +#43510 = EDGE_LOOP('',(#43511,#43519,#43520,#43521)); +#43511 = ORIENTED_EDGE('',*,*,#43512,.F.); +#43512 = EDGE_CURVE('',#43452,#43513,#43515,.T.); +#43513 = VERTEX_POINT('',#43514); +#43514 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#43515 = LINE('',#43516,#43517); +#43516 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#43517 = VECTOR('',#43518,1.); +#43518 = DIRECTION('',(0.,1.,0.)); +#43519 = ORIENTED_EDGE('',*,*,#43451,.T.); +#43520 = ORIENTED_EDGE('',*,*,#35342,.T.); +#43521 = ORIENTED_EDGE('',*,*,#43522,.F.); +#43522 = EDGE_CURVE('',#43513,#35343,#43523,.T.); +#43523 = LINE('',#43524,#43525); +#43524 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#43525 = VECTOR('',#43526,1.); +#43526 = DIRECTION('',(0.,0.,-1.)); +#43527 = PLANE('',#43528); +#43528 = AXIS2_PLACEMENT_3D('',#43529,#43530,#43531); +#43529 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#43530 = DIRECTION('',(1.,0.,0.)); +#43531 = DIRECTION('',(-0.,1.,0.)); +#43532 = ADVANCED_FACE('',(#43533),#43551,.T.); +#43533 = FACE_BOUND('',#43534,.F.); +#43534 = EDGE_LOOP('',(#43535,#43543,#43544,#43545)); +#43535 = ORIENTED_EDGE('',*,*,#43536,.F.); +#43536 = EDGE_CURVE('',#43491,#43537,#43539,.T.); +#43537 = VERTEX_POINT('',#43538); +#43538 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#43539 = LINE('',#43540,#43541); +#43540 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#43541 = VECTOR('',#43542,1.); +#43542 = DIRECTION('',(0.,1.,0.)); +#43543 = ORIENTED_EDGE('',*,*,#43498,.T.); +#43544 = ORIENTED_EDGE('',*,*,#35518,.T.); +#43545 = ORIENTED_EDGE('',*,*,#43546,.F.); +#43546 = EDGE_CURVE('',#43537,#35511,#43547,.T.); +#43547 = LINE('',#43548,#43549); +#43548 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#43549 = VECTOR('',#43550,1.); +#43550 = DIRECTION('',(0.,0.,-1.)); +#43551 = PLANE('',#43552); +#43552 = AXIS2_PLACEMENT_3D('',#43553,#43554,#43555); +#43553 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#43554 = DIRECTION('',(-1.,-0.,-0.)); +#43555 = DIRECTION('',(0.,-1.,0.)); +#43556 = ADVANCED_FACE('',(#43557),#43575,.F.); +#43557 = FACE_BOUND('',#43558,.F.); +#43558 = EDGE_LOOP('',(#43559,#43567,#43573,#43574)); +#43559 = ORIENTED_EDGE('',*,*,#43560,.T.); +#43560 = EDGE_CURVE('',#43513,#43561,#43563,.T.); +#43561 = VERTEX_POINT('',#43562); +#43562 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#43563 = LINE('',#43564,#43565); +#43564 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#43565 = VECTOR('',#43566,1.); +#43566 = DIRECTION('',(0.,1.,0.)); +#43567 = ORIENTED_EDGE('',*,*,#43568,.T.); +#43568 = EDGE_CURVE('',#43561,#35351,#43569,.T.); +#43569 = LINE('',#43570,#43571); +#43570 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#43571 = VECTOR('',#43572,1.); +#43572 = DIRECTION('',(0.,0.,-1.)); +#43573 = ORIENTED_EDGE('',*,*,#35350,.F.); +#43574 = ORIENTED_EDGE('',*,*,#43522,.F.); +#43575 = PLANE('',#43576); +#43576 = AXIS2_PLACEMENT_3D('',#43577,#43578,#43579); +#43577 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#43578 = DIRECTION('',(-1.,0.,0.)); +#43579 = DIRECTION('',(0.,0.,-1.)); +#43580 = ADVANCED_FACE('',(#43581),#43599,.F.); +#43581 = FACE_BOUND('',#43582,.T.); +#43582 = EDGE_LOOP('',(#43583,#43591,#43597,#43598)); +#43583 = ORIENTED_EDGE('',*,*,#43584,.T.); +#43584 = EDGE_CURVE('',#43537,#43585,#43587,.T.); +#43585 = VERTEX_POINT('',#43586); +#43586 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#43587 = LINE('',#43588,#43589); +#43588 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#43589 = VECTOR('',#43590,1.); +#43590 = DIRECTION('',(0.,1.,0.)); +#43591 = ORIENTED_EDGE('',*,*,#43592,.T.); +#43592 = EDGE_CURVE('',#43585,#35503,#43593,.T.); +#43593 = LINE('',#43594,#43595); +#43594 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#43595 = VECTOR('',#43596,1.); +#43596 = DIRECTION('',(0.,0.,-1.)); +#43597 = ORIENTED_EDGE('',*,*,#35510,.F.); +#43598 = ORIENTED_EDGE('',*,*,#43546,.F.); +#43599 = PLANE('',#43600); +#43600 = AXIS2_PLACEMENT_3D('',#43601,#43602,#43603); +#43601 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#43602 = DIRECTION('',(1.,0.,0.)); +#43603 = DIRECTION('',(0.,0.,1.)); +#43604 = ADVANCED_FACE('',(#43605),#43623,.T.); +#43605 = FACE_BOUND('',#43606,.T.); +#43606 = EDGE_LOOP('',(#43607,#43615,#43616,#43617)); +#43607 = ORIENTED_EDGE('',*,*,#43608,.F.); +#43608 = EDGE_CURVE('',#43561,#43609,#43611,.T.); +#43609 = VERTEX_POINT('',#43610); +#43610 = CARTESIAN_POINT('',(-1.455,-11.9,0.4)); +#43611 = LINE('',#43612,#43613); +#43612 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#43613 = VECTOR('',#43614,1.); +#43614 = DIRECTION('',(1.,0.,0.)); +#43615 = ORIENTED_EDGE('',*,*,#43568,.T.); +#43616 = ORIENTED_EDGE('',*,*,#35358,.T.); +#43617 = ORIENTED_EDGE('',*,*,#43618,.F.); +#43618 = EDGE_CURVE('',#43609,#35359,#43619,.T.); +#43619 = LINE('',#43620,#43621); +#43620 = CARTESIAN_POINT('',(-1.455,-11.9,0.4)); +#43621 = VECTOR('',#43622,1.); +#43622 = DIRECTION('',(0.,0.,-1.)); +#43623 = PLANE('',#43624); +#43624 = AXIS2_PLACEMENT_3D('',#43625,#43626,#43627); +#43625 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#43626 = DIRECTION('',(0.,-1.,0.)); +#43627 = DIRECTION('',(1.,0.,0.)); +#43628 = ADVANCED_FACE('',(#43629),#43647,.T.); +#43629 = FACE_BOUND('',#43630,.F.); +#43630 = EDGE_LOOP('',(#43631,#43639,#43640,#43641)); +#43631 = ORIENTED_EDGE('',*,*,#43632,.F.); +#43632 = EDGE_CURVE('',#43585,#43633,#43635,.T.); +#43633 = VERTEX_POINT('',#43634); +#43634 = CARTESIAN_POINT('',(1.455,-11.9,0.4)); +#43635 = LINE('',#43636,#43637); +#43636 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#43637 = VECTOR('',#43638,1.); +#43638 = DIRECTION('',(-1.,-0.,-0.)); +#43639 = ORIENTED_EDGE('',*,*,#43592,.T.); +#43640 = ORIENTED_EDGE('',*,*,#35502,.T.); +#43641 = ORIENTED_EDGE('',*,*,#43642,.F.); +#43642 = EDGE_CURVE('',#43633,#35495,#43643,.T.); +#43643 = LINE('',#43644,#43645); +#43644 = CARTESIAN_POINT('',(1.455,-11.9,0.4)); +#43645 = VECTOR('',#43646,1.); +#43646 = DIRECTION('',(0.,0.,-1.)); +#43647 = PLANE('',#43648); +#43648 = AXIS2_PLACEMENT_3D('',#43649,#43650,#43651); +#43649 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#43650 = DIRECTION('',(-0.,-1.,-0.)); +#43651 = DIRECTION('',(1.,-0.,0.)); +#43652 = ADVANCED_FACE('',(#43653),#43671,.T.); +#43653 = FACE_BOUND('',#43654,.T.); +#43654 = EDGE_LOOP('',(#43655,#43663,#43664,#43665)); +#43655 = ORIENTED_EDGE('',*,*,#43656,.T.); +#43656 = EDGE_CURVE('',#43657,#43609,#43659,.T.); +#43657 = VERTEX_POINT('',#43658); +#43658 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43659 = LINE('',#43660,#43661); +#43660 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43661 = VECTOR('',#43662,1.); +#43662 = DIRECTION('',(0.,1.,0.)); +#43663 = ORIENTED_EDGE('',*,*,#43618,.T.); +#43664 = ORIENTED_EDGE('',*,*,#35366,.F.); +#43665 = ORIENTED_EDGE('',*,*,#43666,.F.); +#43666 = EDGE_CURVE('',#43657,#35367,#43667,.T.); +#43667 = LINE('',#43668,#43669); +#43668 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43669 = VECTOR('',#43670,1.); +#43670 = DIRECTION('',(0.,0.,-1.)); +#43671 = PLANE('',#43672); +#43672 = AXIS2_PLACEMENT_3D('',#43673,#43674,#43675); +#43673 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43674 = DIRECTION('',(-1.,0.,0.)); +#43675 = DIRECTION('',(0.,0.,-1.)); +#43676 = ADVANCED_FACE('',(#43677),#43695,.T.); +#43677 = FACE_BOUND('',#43678,.F.); +#43678 = EDGE_LOOP('',(#43679,#43687,#43688,#43689)); +#43679 = ORIENTED_EDGE('',*,*,#43680,.T.); +#43680 = EDGE_CURVE('',#43681,#43633,#43683,.T.); +#43681 = VERTEX_POINT('',#43682); +#43682 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43683 = LINE('',#43684,#43685); +#43684 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43685 = VECTOR('',#43686,1.); +#43686 = DIRECTION('',(0.,1.,0.)); +#43687 = ORIENTED_EDGE('',*,*,#43642,.T.); +#43688 = ORIENTED_EDGE('',*,*,#35494,.F.); +#43689 = ORIENTED_EDGE('',*,*,#43690,.F.); +#43690 = EDGE_CURVE('',#43681,#35487,#43691,.T.); +#43691 = LINE('',#43692,#43693); +#43692 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43693 = VECTOR('',#43694,1.); +#43694 = DIRECTION('',(0.,0.,-1.)); +#43695 = PLANE('',#43696); +#43696 = AXIS2_PLACEMENT_3D('',#43697,#43698,#43699); +#43697 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43698 = DIRECTION('',(1.,0.,0.)); +#43699 = DIRECTION('',(0.,0.,1.)); +#43700 = ADVANCED_FACE('',(#43701),#43719,.T.); +#43701 = FACE_BOUND('',#43702,.T.); +#43702 = EDGE_LOOP('',(#43703,#43711,#43712,#43713)); +#43703 = ORIENTED_EDGE('',*,*,#43704,.F.); +#43704 = EDGE_CURVE('',#43657,#43705,#43707,.T.); +#43705 = VERTEX_POINT('',#43706); +#43706 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#43707 = LINE('',#43708,#43709); +#43708 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43709 = VECTOR('',#43710,1.); +#43710 = DIRECTION('',(0.,-1.,0.)); +#43711 = ORIENTED_EDGE('',*,*,#43666,.T.); +#43712 = ORIENTED_EDGE('',*,*,#35374,.T.); +#43713 = ORIENTED_EDGE('',*,*,#43714,.F.); +#43714 = EDGE_CURVE('',#43705,#35375,#43715,.T.); +#43715 = LINE('',#43716,#43717); +#43716 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#43717 = VECTOR('',#43718,1.); +#43718 = DIRECTION('',(0.,0.,-1.)); +#43719 = PLANE('',#43720); +#43720 = AXIS2_PLACEMENT_3D('',#43721,#43722,#43723); +#43721 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#43722 = DIRECTION('',(-1.,0.,0.)); +#43723 = DIRECTION('',(0.,-1.,0.)); +#43724 = ADVANCED_FACE('',(#43725),#43743,.T.); +#43725 = FACE_BOUND('',#43726,.F.); +#43726 = EDGE_LOOP('',(#43727,#43735,#43736,#43737)); +#43727 = ORIENTED_EDGE('',*,*,#43728,.F.); +#43728 = EDGE_CURVE('',#43681,#43729,#43731,.T.); +#43729 = VERTEX_POINT('',#43730); +#43730 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#43731 = LINE('',#43732,#43733); +#43732 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43733 = VECTOR('',#43734,1.); +#43734 = DIRECTION('',(-0.,-1.,-0.)); +#43735 = ORIENTED_EDGE('',*,*,#43690,.T.); +#43736 = ORIENTED_EDGE('',*,*,#35486,.T.); +#43737 = ORIENTED_EDGE('',*,*,#43738,.F.); +#43738 = EDGE_CURVE('',#43729,#35479,#43739,.T.); +#43739 = LINE('',#43740,#43741); +#43740 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#43741 = VECTOR('',#43742,1.); +#43742 = DIRECTION('',(0.,0.,-1.)); +#43743 = PLANE('',#43744); +#43744 = AXIS2_PLACEMENT_3D('',#43745,#43746,#43747); +#43745 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#43746 = DIRECTION('',(1.,0.,0.)); +#43747 = DIRECTION('',(-0.,1.,0.)); +#43748 = ADVANCED_FACE('',(#43749),#43774,.T.); +#43749 = FACE_BOUND('',#43750,.T.); +#43750 = EDGE_LOOP('',(#43751,#43752,#43760,#43766,#43767,#43773)); +#43751 = ORIENTED_EDGE('',*,*,#35382,.F.); +#43752 = ORIENTED_EDGE('',*,*,#43753,.F.); +#43753 = EDGE_CURVE('',#43754,#35383,#43756,.T.); +#43754 = VERTEX_POINT('',#43755); +#43755 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#43756 = LINE('',#43757,#43758); +#43757 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#43758 = VECTOR('',#43759,1.); +#43759 = DIRECTION('',(0.,0.,-1.)); +#43760 = ORIENTED_EDGE('',*,*,#43761,.F.); +#43761 = EDGE_CURVE('',#37322,#43754,#43762,.T.); +#43762 = LINE('',#43763,#43764); +#43763 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#43764 = VECTOR('',#43765,1.); +#43765 = DIRECTION('',(-0.,-0.,-1.)); +#43766 = ORIENTED_EDGE('',*,*,#37321,.T.); +#43767 = ORIENTED_EDGE('',*,*,#43768,.T.); +#43768 = EDGE_CURVE('',#37314,#43705,#43769,.T.); +#43769 = LINE('',#43770,#43771); +#43770 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#43771 = VECTOR('',#43772,1.); +#43772 = DIRECTION('',(-0.,-0.,-1.)); +#43773 = ORIENTED_EDGE('',*,*,#43714,.T.); +#43774 = PLANE('',#43775); +#43775 = AXIS2_PLACEMENT_3D('',#43776,#43777,#43778); +#43776 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43777 = DIRECTION('',(0.,-1.,0.)); +#43778 = DIRECTION('',(-1.,0.,0.)); +#43779 = ADVANCED_FACE('',(#43780),#43805,.T.); +#43780 = FACE_BOUND('',#43781,.T.); +#43781 = EDGE_LOOP('',(#43782,#43783,#43784,#43790,#43791,#43799)); +#43782 = ORIENTED_EDGE('',*,*,#35478,.F.); +#43783 = ORIENTED_EDGE('',*,*,#43738,.F.); +#43784 = ORIENTED_EDGE('',*,*,#43785,.F.); +#43785 = EDGE_CURVE('',#37386,#43729,#43786,.T.); +#43786 = LINE('',#43787,#43788); +#43787 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#43788 = VECTOR('',#43789,1.); +#43789 = DIRECTION('',(0.,0.,-1.)); +#43790 = ORIENTED_EDGE('',*,*,#37385,.T.); +#43791 = ORIENTED_EDGE('',*,*,#43792,.T.); +#43792 = EDGE_CURVE('',#37378,#43793,#43795,.T.); +#43793 = VERTEX_POINT('',#43794); +#43794 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#43795 = LINE('',#43796,#43797); +#43796 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#43797 = VECTOR('',#43798,1.); +#43798 = DIRECTION('',(0.,0.,-1.)); +#43799 = ORIENTED_EDGE('',*,*,#43800,.T.); +#43800 = EDGE_CURVE('',#43793,#35471,#43801,.T.); +#43801 = LINE('',#43802,#43803); +#43802 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#43803 = VECTOR('',#43804,1.); +#43804 = DIRECTION('',(0.,0.,-1.)); +#43805 = PLANE('',#43806); +#43806 = AXIS2_PLACEMENT_3D('',#43807,#43808,#43809); +#43807 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#43808 = DIRECTION('',(0.,-1.,0.)); +#43809 = DIRECTION('',(-1.,0.,0.)); +#43810 = ADVANCED_FACE('',(#43811),#43829,.T.); +#43811 = FACE_BOUND('',#43812,.T.); +#43812 = EDGE_LOOP('',(#43813,#43821,#43822,#43823)); +#43813 = ORIENTED_EDGE('',*,*,#43814,.F.); +#43814 = EDGE_CURVE('',#43754,#43815,#43817,.T.); +#43815 = VERTEX_POINT('',#43816); +#43816 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#43817 = LINE('',#43818,#43819); +#43818 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#43819 = VECTOR('',#43820,1.); +#43820 = DIRECTION('',(0.,1.,0.)); +#43821 = ORIENTED_EDGE('',*,*,#43753,.T.); +#43822 = ORIENTED_EDGE('',*,*,#35390,.T.); +#43823 = ORIENTED_EDGE('',*,*,#43824,.F.); +#43824 = EDGE_CURVE('',#43815,#35391,#43825,.T.); +#43825 = LINE('',#43826,#43827); +#43826 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#43827 = VECTOR('',#43828,1.); +#43828 = DIRECTION('',(0.,0.,-1.)); +#43829 = PLANE('',#43830); +#43830 = AXIS2_PLACEMENT_3D('',#43831,#43832,#43833); +#43831 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#43832 = DIRECTION('',(1.,0.,0.)); +#43833 = DIRECTION('',(-0.,1.,0.)); +#43834 = ADVANCED_FACE('',(#43835),#43853,.T.); +#43835 = FACE_BOUND('',#43836,.F.); +#43836 = EDGE_LOOP('',(#43837,#43845,#43846,#43847)); +#43837 = ORIENTED_EDGE('',*,*,#43838,.F.); +#43838 = EDGE_CURVE('',#43793,#43839,#43841,.T.); +#43839 = VERTEX_POINT('',#43840); +#43840 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#43841 = LINE('',#43842,#43843); +#43842 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#43843 = VECTOR('',#43844,1.); +#43844 = DIRECTION('',(0.,1.,0.)); +#43845 = ORIENTED_EDGE('',*,*,#43800,.T.); +#43846 = ORIENTED_EDGE('',*,*,#35470,.T.); +#43847 = ORIENTED_EDGE('',*,*,#43848,.F.); +#43848 = EDGE_CURVE('',#43839,#35463,#43849,.T.); +#43849 = LINE('',#43850,#43851); +#43850 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#43851 = VECTOR('',#43852,1.); +#43852 = DIRECTION('',(0.,0.,-1.)); +#43853 = PLANE('',#43854); +#43854 = AXIS2_PLACEMENT_3D('',#43855,#43856,#43857); +#43855 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#43856 = DIRECTION('',(-1.,-0.,-0.)); +#43857 = DIRECTION('',(0.,-1.,0.)); +#43858 = ADVANCED_FACE('',(#43859),#43877,.F.); +#43859 = FACE_BOUND('',#43860,.F.); +#43860 = EDGE_LOOP('',(#43861,#43869,#43875,#43876)); +#43861 = ORIENTED_EDGE('',*,*,#43862,.T.); +#43862 = EDGE_CURVE('',#43815,#43863,#43865,.T.); +#43863 = VERTEX_POINT('',#43864); +#43864 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#43865 = LINE('',#43866,#43867); +#43866 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#43867 = VECTOR('',#43868,1.); +#43868 = DIRECTION('',(0.,1.,0.)); +#43869 = ORIENTED_EDGE('',*,*,#43870,.T.); +#43870 = EDGE_CURVE('',#43863,#35399,#43871,.T.); +#43871 = LINE('',#43872,#43873); +#43872 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#43873 = VECTOR('',#43874,1.); +#43874 = DIRECTION('',(0.,0.,-1.)); +#43875 = ORIENTED_EDGE('',*,*,#35398,.F.); +#43876 = ORIENTED_EDGE('',*,*,#43824,.F.); +#43877 = PLANE('',#43878); +#43878 = AXIS2_PLACEMENT_3D('',#43879,#43880,#43881); +#43879 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#43880 = DIRECTION('',(-1.,0.,0.)); +#43881 = DIRECTION('',(0.,0.,-1.)); +#43882 = ADVANCED_FACE('',(#43883),#43901,.F.); +#43883 = FACE_BOUND('',#43884,.T.); +#43884 = EDGE_LOOP('',(#43885,#43893,#43899,#43900)); +#43885 = ORIENTED_EDGE('',*,*,#43886,.T.); +#43886 = EDGE_CURVE('',#43839,#43887,#43889,.T.); +#43887 = VERTEX_POINT('',#43888); +#43888 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#43889 = LINE('',#43890,#43891); +#43890 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#43891 = VECTOR('',#43892,1.); +#43892 = DIRECTION('',(0.,1.,0.)); +#43893 = ORIENTED_EDGE('',*,*,#43894,.T.); +#43894 = EDGE_CURVE('',#43887,#35455,#43895,.T.); +#43895 = LINE('',#43896,#43897); +#43896 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#43897 = VECTOR('',#43898,1.); +#43898 = DIRECTION('',(0.,0.,-1.)); +#43899 = ORIENTED_EDGE('',*,*,#35462,.F.); +#43900 = ORIENTED_EDGE('',*,*,#43848,.F.); +#43901 = PLANE('',#43902); +#43902 = AXIS2_PLACEMENT_3D('',#43903,#43904,#43905); +#43903 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#43904 = DIRECTION('',(1.,0.,0.)); +#43905 = DIRECTION('',(0.,0.,1.)); +#43906 = ADVANCED_FACE('',(#43907),#43925,.T.); +#43907 = FACE_BOUND('',#43908,.T.); +#43908 = EDGE_LOOP('',(#43909,#43917,#43918,#43919)); +#43909 = ORIENTED_EDGE('',*,*,#43910,.F.); +#43910 = EDGE_CURVE('',#43863,#43911,#43913,.T.); +#43911 = VERTEX_POINT('',#43912); +#43912 = CARTESIAN_POINT('',(-0.185,-11.9,0.4)); +#43913 = LINE('',#43914,#43915); +#43914 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#43915 = VECTOR('',#43916,1.); +#43916 = DIRECTION('',(1.,0.,0.)); +#43917 = ORIENTED_EDGE('',*,*,#43870,.T.); +#43918 = ORIENTED_EDGE('',*,*,#35406,.T.); +#43919 = ORIENTED_EDGE('',*,*,#43920,.F.); +#43920 = EDGE_CURVE('',#43911,#35407,#43921,.T.); +#43921 = LINE('',#43922,#43923); +#43922 = CARTESIAN_POINT('',(-0.185,-11.9,0.4)); +#43923 = VECTOR('',#43924,1.); +#43924 = DIRECTION('',(0.,0.,-1.)); +#43925 = PLANE('',#43926); +#43926 = AXIS2_PLACEMENT_3D('',#43927,#43928,#43929); +#43927 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#43928 = DIRECTION('',(0.,-1.,0.)); +#43929 = DIRECTION('',(1.,0.,0.)); +#43930 = ADVANCED_FACE('',(#43931),#43949,.T.); +#43931 = FACE_BOUND('',#43932,.F.); +#43932 = EDGE_LOOP('',(#43933,#43941,#43942,#43943)); +#43933 = ORIENTED_EDGE('',*,*,#43934,.F.); +#43934 = EDGE_CURVE('',#43887,#43935,#43937,.T.); +#43935 = VERTEX_POINT('',#43936); +#43936 = CARTESIAN_POINT('',(0.185,-11.9,0.4)); +#43937 = LINE('',#43938,#43939); +#43938 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#43939 = VECTOR('',#43940,1.); +#43940 = DIRECTION('',(-1.,-0.,-0.)); +#43941 = ORIENTED_EDGE('',*,*,#43894,.T.); +#43942 = ORIENTED_EDGE('',*,*,#35454,.T.); +#43943 = ORIENTED_EDGE('',*,*,#43944,.F.); +#43944 = EDGE_CURVE('',#43935,#35447,#43945,.T.); +#43945 = LINE('',#43946,#43947); +#43946 = CARTESIAN_POINT('',(0.185,-11.9,0.4)); +#43947 = VECTOR('',#43948,1.); +#43948 = DIRECTION('',(0.,0.,-1.)); +#43949 = PLANE('',#43950); +#43950 = AXIS2_PLACEMENT_3D('',#43951,#43952,#43953); +#43951 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#43952 = DIRECTION('',(-0.,-1.,-0.)); +#43953 = DIRECTION('',(1.,-0.,0.)); +#43954 = ADVANCED_FACE('',(#43955),#43973,.T.); +#43955 = FACE_BOUND('',#43956,.T.); +#43956 = EDGE_LOOP('',(#43957,#43965,#43966,#43967)); +#43957 = ORIENTED_EDGE('',*,*,#43958,.T.); +#43958 = EDGE_CURVE('',#43959,#43911,#43961,.T.); +#43959 = VERTEX_POINT('',#43960); +#43960 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#43961 = LINE('',#43962,#43963); +#43962 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#43963 = VECTOR('',#43964,1.); +#43964 = DIRECTION('',(0.,1.,0.)); +#43965 = ORIENTED_EDGE('',*,*,#43920,.T.); +#43966 = ORIENTED_EDGE('',*,*,#35414,.F.); +#43967 = ORIENTED_EDGE('',*,*,#43968,.F.); +#43968 = EDGE_CURVE('',#43959,#35415,#43969,.T.); +#43969 = LINE('',#43970,#43971); +#43970 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#43971 = VECTOR('',#43972,1.); +#43972 = DIRECTION('',(0.,0.,-1.)); +#43973 = PLANE('',#43974); +#43974 = AXIS2_PLACEMENT_3D('',#43975,#43976,#43977); +#43975 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#43976 = DIRECTION('',(-1.,0.,0.)); +#43977 = DIRECTION('',(0.,0.,-1.)); +#43978 = ADVANCED_FACE('',(#43979),#43997,.T.); +#43979 = FACE_BOUND('',#43980,.F.); +#43980 = EDGE_LOOP('',(#43981,#43989,#43990,#43991)); +#43981 = ORIENTED_EDGE('',*,*,#43982,.T.); +#43982 = EDGE_CURVE('',#43983,#43935,#43985,.T.); +#43983 = VERTEX_POINT('',#43984); +#43984 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#43985 = LINE('',#43986,#43987); +#43986 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#43987 = VECTOR('',#43988,1.); +#43988 = DIRECTION('',(0.,1.,0.)); +#43989 = ORIENTED_EDGE('',*,*,#43944,.T.); +#43990 = ORIENTED_EDGE('',*,*,#35446,.F.); +#43991 = ORIENTED_EDGE('',*,*,#43992,.F.); +#43992 = EDGE_CURVE('',#43983,#35439,#43993,.T.); +#43993 = LINE('',#43994,#43995); +#43994 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#43995 = VECTOR('',#43996,1.); +#43996 = DIRECTION('',(0.,0.,-1.)); +#43997 = PLANE('',#43998); +#43998 = AXIS2_PLACEMENT_3D('',#43999,#44000,#44001); +#43999 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#44000 = DIRECTION('',(1.,0.,0.)); +#44001 = DIRECTION('',(0.,0.,1.)); +#44002 = ADVANCED_FACE('',(#44003),#44021,.T.); +#44003 = FACE_BOUND('',#44004,.T.); +#44004 = EDGE_LOOP('',(#44005,#44013,#44014,#44015)); +#44005 = ORIENTED_EDGE('',*,*,#44006,.F.); +#44006 = EDGE_CURVE('',#43959,#44007,#44009,.T.); +#44007 = VERTEX_POINT('',#44008); +#44008 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#44009 = LINE('',#44010,#44011); +#44010 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#44011 = VECTOR('',#44012,1.); +#44012 = DIRECTION('',(0.,-1.,0.)); +#44013 = ORIENTED_EDGE('',*,*,#43968,.T.); +#44014 = ORIENTED_EDGE('',*,*,#35422,.T.); +#44015 = ORIENTED_EDGE('',*,*,#44016,.F.); +#44016 = EDGE_CURVE('',#44007,#35423,#44017,.T.); +#44017 = LINE('',#44018,#44019); +#44018 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#44019 = VECTOR('',#44020,1.); +#44020 = DIRECTION('',(0.,0.,-1.)); +#44021 = PLANE('',#44022); +#44022 = AXIS2_PLACEMENT_3D('',#44023,#44024,#44025); +#44023 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#44024 = DIRECTION('',(-1.,0.,0.)); +#44025 = DIRECTION('',(0.,-1.,0.)); +#44026 = ADVANCED_FACE('',(#44027),#44045,.T.); +#44027 = FACE_BOUND('',#44028,.F.); +#44028 = EDGE_LOOP('',(#44029,#44037,#44038,#44039)); +#44029 = ORIENTED_EDGE('',*,*,#44030,.F.); +#44030 = EDGE_CURVE('',#43983,#44031,#44033,.T.); +#44031 = VERTEX_POINT('',#44032); +#44032 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#44033 = LINE('',#44034,#44035); +#44034 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#44035 = VECTOR('',#44036,1.); +#44036 = DIRECTION('',(-0.,-1.,-0.)); +#44037 = ORIENTED_EDGE('',*,*,#43992,.T.); +#44038 = ORIENTED_EDGE('',*,*,#35438,.T.); +#44039 = ORIENTED_EDGE('',*,*,#44040,.F.); +#44040 = EDGE_CURVE('',#44031,#35431,#44041,.T.); +#44041 = LINE('',#44042,#44043); +#44042 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#44043 = VECTOR('',#44044,1.); +#44044 = DIRECTION('',(0.,0.,-1.)); +#44045 = PLANE('',#44046); +#44046 = AXIS2_PLACEMENT_3D('',#44047,#44048,#44049); +#44047 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#44048 = DIRECTION('',(1.,0.,0.)); +#44049 = DIRECTION('',(-0.,1.,0.)); +#44050 = ADVANCED_FACE('',(#44051),#44069,.T.); +#44051 = FACE_BOUND('',#44052,.T.); +#44052 = EDGE_LOOP('',(#44053,#44054,#44055,#44061,#44062,#44068)); +#44053 = ORIENTED_EDGE('',*,*,#35430,.F.); +#44054 = ORIENTED_EDGE('',*,*,#44040,.F.); +#44055 = ORIENTED_EDGE('',*,*,#44056,.F.); +#44056 = EDGE_CURVE('',#37354,#44031,#44057,.T.); +#44057 = LINE('',#44058,#44059); +#44058 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#44059 = VECTOR('',#44060,1.); +#44060 = DIRECTION('',(0.,0.,-1.)); +#44061 = ORIENTED_EDGE('',*,*,#37353,.T.); +#44062 = ORIENTED_EDGE('',*,*,#44063,.T.); +#44063 = EDGE_CURVE('',#37346,#44007,#44064,.T.); +#44064 = LINE('',#44065,#44066); +#44065 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#44066 = VECTOR('',#44067,1.); +#44067 = DIRECTION('',(-0.,-0.,-1.)); +#44068 = ORIENTED_EDGE('',*,*,#44016,.T.); +#44069 = PLANE('',#44070); +#44070 = AXIS2_PLACEMENT_3D('',#44071,#44072,#44073); +#44071 = CARTESIAN_POINT('',(9.,-12.75,0.)); +#44072 = DIRECTION('',(0.,-1.,0.)); +#44073 = DIRECTION('',(-1.,0.,0.)); +#44074 = ADVANCED_FACE('',(#44075),#44100,.T.); +#44075 = FACE_BOUND('',#44076,.T.); +#44076 = EDGE_LOOP('',(#44077,#44085,#44093,#44099)); +#44077 = ORIENTED_EDGE('',*,*,#44078,.T.); +#44078 = EDGE_CURVE('',#36400,#44079,#44081,.T.); +#44079 = VERTEX_POINT('',#44080); +#44080 = CARTESIAN_POINT('',(-2.45,-3.41,0.4)); +#44081 = LINE('',#44082,#44083); +#44082 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#44083 = VECTOR('',#44084,1.); +#44084 = DIRECTION('',(0.,0.,1.)); +#44085 = ORIENTED_EDGE('',*,*,#44086,.T.); +#44086 = EDGE_CURVE('',#44079,#44087,#44089,.T.); +#44087 = VERTEX_POINT('',#44088); +#44088 = CARTESIAN_POINT('',(-3.35,-3.41,0.4)); +#44089 = LINE('',#44090,#44091); +#44090 = CARTESIAN_POINT('',(-2.45,-3.41,0.4)); +#44091 = VECTOR('',#44092,1.); +#44092 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44093 = ORIENTED_EDGE('',*,*,#44094,.F.); +#44094 = EDGE_CURVE('',#36402,#44087,#44095,.T.); +#44095 = LINE('',#44096,#44097); +#44096 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#44097 = VECTOR('',#44098,1.); +#44098 = DIRECTION('',(0.,0.,1.)); +#44099 = ORIENTED_EDGE('',*,*,#36399,.F.); +#44100 = PLANE('',#44101); +#44101 = AXIS2_PLACEMENT_3D('',#44102,#44103,#44104); +#44102 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#44103 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44104 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44105 = ADVANCED_FACE('',(#44106),#44124,.T.); +#44106 = FACE_BOUND('',#44107,.T.); +#44107 = EDGE_LOOP('',(#44108,#44109,#44117,#44123)); +#44108 = ORIENTED_EDGE('',*,*,#44094,.T.); +#44109 = ORIENTED_EDGE('',*,*,#44110,.T.); +#44110 = EDGE_CURVE('',#44087,#44111,#44113,.T.); +#44111 = VERTEX_POINT('',#44112); +#44112 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#44113 = LINE('',#44114,#44115); +#44114 = CARTESIAN_POINT('',(-3.35,-3.41,0.4)); +#44115 = VECTOR('',#44116,1.); +#44116 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44117 = ORIENTED_EDGE('',*,*,#44118,.F.); +#44118 = EDGE_CURVE('',#36418,#44111,#44119,.T.); +#44119 = LINE('',#44120,#44121); +#44120 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#44121 = VECTOR('',#44122,1.); +#44122 = DIRECTION('',(0.,0.,1.)); +#44123 = ORIENTED_EDGE('',*,*,#36425,.F.); +#44124 = PLANE('',#44125); +#44125 = AXIS2_PLACEMENT_3D('',#44126,#44127,#44128); +#44126 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#44127 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44128 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44129 = ADVANCED_FACE('',(#44130),#44148,.T.); +#44130 = FACE_BOUND('',#44131,.T.); +#44131 = EDGE_LOOP('',(#44132,#44133,#44141,#44147)); +#44132 = ORIENTED_EDGE('',*,*,#44118,.T.); +#44133 = ORIENTED_EDGE('',*,*,#44134,.T.); +#44134 = EDGE_CURVE('',#44111,#44135,#44137,.T.); +#44135 = VERTEX_POINT('',#44136); +#44136 = CARTESIAN_POINT('',(-2.45,-4.31,0.4)); +#44137 = LINE('',#44138,#44139); +#44138 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#44139 = VECTOR('',#44140,1.); +#44140 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44141 = ORIENTED_EDGE('',*,*,#44142,.F.); +#44142 = EDGE_CURVE('',#36410,#44135,#44143,.T.); +#44143 = LINE('',#44144,#44145); +#44144 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#44145 = VECTOR('',#44146,1.); +#44146 = DIRECTION('',(0.,0.,1.)); +#44147 = ORIENTED_EDGE('',*,*,#36417,.F.); +#44148 = PLANE('',#44149); +#44149 = AXIS2_PLACEMENT_3D('',#44150,#44151,#44152); +#44150 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#44151 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44152 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44153 = ADVANCED_FACE('',(#44154),#44165,.T.); +#44154 = FACE_BOUND('',#44155,.T.); +#44155 = EDGE_LOOP('',(#44156,#44157,#44163,#44164)); +#44156 = ORIENTED_EDGE('',*,*,#44142,.T.); +#44157 = ORIENTED_EDGE('',*,*,#44158,.T.); +#44158 = EDGE_CURVE('',#44135,#44079,#44159,.T.); +#44159 = LINE('',#44160,#44161); +#44160 = CARTESIAN_POINT('',(-2.45,-4.31,0.4)); +#44161 = VECTOR('',#44162,1.); +#44162 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44163 = ORIENTED_EDGE('',*,*,#44078,.F.); +#44164 = ORIENTED_EDGE('',*,*,#36409,.F.); +#44165 = PLANE('',#44166); +#44166 = AXIS2_PLACEMENT_3D('',#44167,#44168,#44169); +#44167 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#44168 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44169 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44170 = ADVANCED_FACE('',(#44171),#44196,.T.); +#44171 = FACE_BOUND('',#44172,.T.); +#44172 = EDGE_LOOP('',(#44173,#44181,#44189,#44195)); +#44173 = ORIENTED_EDGE('',*,*,#44174,.T.); +#44174 = EDGE_CURVE('',#36434,#44175,#44177,.T.); +#44175 = VERTEX_POINT('',#44176); +#44176 = CARTESIAN_POINT('',(-1.05,-3.41,0.4)); +#44177 = LINE('',#44178,#44179); +#44178 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#44179 = VECTOR('',#44180,1.); +#44180 = DIRECTION('',(0.,0.,1.)); +#44181 = ORIENTED_EDGE('',*,*,#44182,.T.); +#44182 = EDGE_CURVE('',#44175,#44183,#44185,.T.); +#44183 = VERTEX_POINT('',#44184); +#44184 = CARTESIAN_POINT('',(-1.95,-3.41,0.4)); +#44185 = LINE('',#44186,#44187); +#44186 = CARTESIAN_POINT('',(-1.05,-3.41,0.4)); +#44187 = VECTOR('',#44188,1.); +#44188 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44189 = ORIENTED_EDGE('',*,*,#44190,.F.); +#44190 = EDGE_CURVE('',#36436,#44183,#44191,.T.); +#44191 = LINE('',#44192,#44193); +#44192 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#44193 = VECTOR('',#44194,1.); +#44194 = DIRECTION('',(0.,0.,1.)); +#44195 = ORIENTED_EDGE('',*,*,#36433,.F.); +#44196 = PLANE('',#44197); +#44197 = AXIS2_PLACEMENT_3D('',#44198,#44199,#44200); +#44198 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#44199 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44200 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44201 = ADVANCED_FACE('',(#44202),#44220,.T.); +#44202 = FACE_BOUND('',#44203,.T.); +#44203 = EDGE_LOOP('',(#44204,#44205,#44213,#44219)); +#44204 = ORIENTED_EDGE('',*,*,#44190,.T.); +#44205 = ORIENTED_EDGE('',*,*,#44206,.T.); +#44206 = EDGE_CURVE('',#44183,#44207,#44209,.T.); +#44207 = VERTEX_POINT('',#44208); +#44208 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#44209 = LINE('',#44210,#44211); +#44210 = CARTESIAN_POINT('',(-1.95,-3.41,0.4)); +#44211 = VECTOR('',#44212,1.); +#44212 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44213 = ORIENTED_EDGE('',*,*,#44214,.F.); +#44214 = EDGE_CURVE('',#36452,#44207,#44215,.T.); +#44215 = LINE('',#44216,#44217); +#44216 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#44217 = VECTOR('',#44218,1.); +#44218 = DIRECTION('',(0.,0.,1.)); +#44219 = ORIENTED_EDGE('',*,*,#36459,.F.); +#44220 = PLANE('',#44221); +#44221 = AXIS2_PLACEMENT_3D('',#44222,#44223,#44224); +#44222 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#44223 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44224 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44225 = ADVANCED_FACE('',(#44226),#44244,.T.); +#44226 = FACE_BOUND('',#44227,.T.); +#44227 = EDGE_LOOP('',(#44228,#44229,#44237,#44243)); +#44228 = ORIENTED_EDGE('',*,*,#44214,.T.); +#44229 = ORIENTED_EDGE('',*,*,#44230,.T.); +#44230 = EDGE_CURVE('',#44207,#44231,#44233,.T.); +#44231 = VERTEX_POINT('',#44232); +#44232 = CARTESIAN_POINT('',(-1.05,-4.31,0.4)); +#44233 = LINE('',#44234,#44235); +#44234 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#44235 = VECTOR('',#44236,1.); +#44236 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44237 = ORIENTED_EDGE('',*,*,#44238,.F.); +#44238 = EDGE_CURVE('',#36444,#44231,#44239,.T.); +#44239 = LINE('',#44240,#44241); +#44240 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#44241 = VECTOR('',#44242,1.); +#44242 = DIRECTION('',(0.,0.,1.)); +#44243 = ORIENTED_EDGE('',*,*,#36451,.F.); +#44244 = PLANE('',#44245); +#44245 = AXIS2_PLACEMENT_3D('',#44246,#44247,#44248); +#44246 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#44247 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44248 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44249 = ADVANCED_FACE('',(#44250),#44261,.T.); +#44250 = FACE_BOUND('',#44251,.T.); +#44251 = EDGE_LOOP('',(#44252,#44253,#44259,#44260)); +#44252 = ORIENTED_EDGE('',*,*,#44238,.T.); +#44253 = ORIENTED_EDGE('',*,*,#44254,.T.); +#44254 = EDGE_CURVE('',#44231,#44175,#44255,.T.); +#44255 = LINE('',#44256,#44257); +#44256 = CARTESIAN_POINT('',(-1.05,-4.31,0.4)); +#44257 = VECTOR('',#44258,1.); +#44258 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44259 = ORIENTED_EDGE('',*,*,#44174,.F.); +#44260 = ORIENTED_EDGE('',*,*,#36443,.F.); +#44261 = PLANE('',#44262); +#44262 = AXIS2_PLACEMENT_3D('',#44263,#44264,#44265); +#44263 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#44264 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44265 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44266 = ADVANCED_FACE('',(#44267),#44292,.T.); +#44267 = FACE_BOUND('',#44268,.T.); +#44268 = EDGE_LOOP('',(#44269,#44277,#44285,#44291)); +#44269 = ORIENTED_EDGE('',*,*,#44270,.T.); +#44270 = EDGE_CURVE('',#36468,#44271,#44273,.T.); +#44271 = VERTEX_POINT('',#44272); +#44272 = CARTESIAN_POINT('',(0.35,-3.41,0.4)); +#44273 = LINE('',#44274,#44275); +#44274 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#44275 = VECTOR('',#44276,1.); +#44276 = DIRECTION('',(0.,0.,1.)); +#44277 = ORIENTED_EDGE('',*,*,#44278,.T.); +#44278 = EDGE_CURVE('',#44271,#44279,#44281,.T.); +#44279 = VERTEX_POINT('',#44280); +#44280 = CARTESIAN_POINT('',(-0.55,-3.41,0.4)); +#44281 = LINE('',#44282,#44283); +#44282 = CARTESIAN_POINT('',(0.35,-3.41,0.4)); +#44283 = VECTOR('',#44284,1.); +#44284 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44285 = ORIENTED_EDGE('',*,*,#44286,.F.); +#44286 = EDGE_CURVE('',#36470,#44279,#44287,.T.); +#44287 = LINE('',#44288,#44289); +#44288 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#44289 = VECTOR('',#44290,1.); +#44290 = DIRECTION('',(0.,0.,1.)); +#44291 = ORIENTED_EDGE('',*,*,#36467,.F.); +#44292 = PLANE('',#44293); +#44293 = AXIS2_PLACEMENT_3D('',#44294,#44295,#44296); +#44294 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#44295 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44296 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44297 = ADVANCED_FACE('',(#44298),#44316,.T.); +#44298 = FACE_BOUND('',#44299,.T.); +#44299 = EDGE_LOOP('',(#44300,#44301,#44309,#44315)); +#44300 = ORIENTED_EDGE('',*,*,#44286,.T.); +#44301 = ORIENTED_EDGE('',*,*,#44302,.T.); +#44302 = EDGE_CURVE('',#44279,#44303,#44305,.T.); +#44303 = VERTEX_POINT('',#44304); +#44304 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#44305 = LINE('',#44306,#44307); +#44306 = CARTESIAN_POINT('',(-0.55,-3.41,0.4)); +#44307 = VECTOR('',#44308,1.); +#44308 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44309 = ORIENTED_EDGE('',*,*,#44310,.F.); +#44310 = EDGE_CURVE('',#36486,#44303,#44311,.T.); +#44311 = LINE('',#44312,#44313); +#44312 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#44313 = VECTOR('',#44314,1.); +#44314 = DIRECTION('',(0.,0.,1.)); +#44315 = ORIENTED_EDGE('',*,*,#36493,.F.); +#44316 = PLANE('',#44317); +#44317 = AXIS2_PLACEMENT_3D('',#44318,#44319,#44320); +#44318 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#44319 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44320 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44321 = ADVANCED_FACE('',(#44322),#44340,.T.); +#44322 = FACE_BOUND('',#44323,.T.); +#44323 = EDGE_LOOP('',(#44324,#44325,#44333,#44339)); +#44324 = ORIENTED_EDGE('',*,*,#44310,.T.); +#44325 = ORIENTED_EDGE('',*,*,#44326,.T.); +#44326 = EDGE_CURVE('',#44303,#44327,#44329,.T.); +#44327 = VERTEX_POINT('',#44328); +#44328 = CARTESIAN_POINT('',(0.35,-4.31,0.4)); +#44329 = LINE('',#44330,#44331); +#44330 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#44331 = VECTOR('',#44332,1.); +#44332 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44333 = ORIENTED_EDGE('',*,*,#44334,.F.); +#44334 = EDGE_CURVE('',#36478,#44327,#44335,.T.); +#44335 = LINE('',#44336,#44337); +#44336 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#44337 = VECTOR('',#44338,1.); +#44338 = DIRECTION('',(0.,0.,1.)); +#44339 = ORIENTED_EDGE('',*,*,#36485,.F.); +#44340 = PLANE('',#44341); +#44341 = AXIS2_PLACEMENT_3D('',#44342,#44343,#44344); +#44342 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#44343 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44344 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44345 = ADVANCED_FACE('',(#44346),#44357,.T.); +#44346 = FACE_BOUND('',#44347,.T.); +#44347 = EDGE_LOOP('',(#44348,#44349,#44355,#44356)); +#44348 = ORIENTED_EDGE('',*,*,#44334,.T.); +#44349 = ORIENTED_EDGE('',*,*,#44350,.T.); +#44350 = EDGE_CURVE('',#44327,#44271,#44351,.T.); +#44351 = LINE('',#44352,#44353); +#44352 = CARTESIAN_POINT('',(0.35,-4.31,0.4)); +#44353 = VECTOR('',#44354,1.); +#44354 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44355 = ORIENTED_EDGE('',*,*,#44270,.F.); +#44356 = ORIENTED_EDGE('',*,*,#36477,.F.); +#44357 = PLANE('',#44358); +#44358 = AXIS2_PLACEMENT_3D('',#44359,#44360,#44361); +#44359 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#44360 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44361 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44362 = ADVANCED_FACE('',(#44363),#44388,.F.); +#44363 = FACE_BOUND('',#44364,.F.); +#44364 = EDGE_LOOP('',(#44365,#44373,#44381,#44387)); +#44365 = ORIENTED_EDGE('',*,*,#44366,.T.); +#44366 = EDGE_CURVE('',#36502,#44367,#44369,.T.); +#44367 = VERTEX_POINT('',#44368); +#44368 = CARTESIAN_POINT('',(-2.45,-2.01,0.4)); +#44369 = LINE('',#44370,#44371); +#44370 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#44371 = VECTOR('',#44372,1.); +#44372 = DIRECTION('',(0.,0.,1.)); +#44373 = ORIENTED_EDGE('',*,*,#44374,.T.); +#44374 = EDGE_CURVE('',#44367,#44375,#44377,.T.); +#44375 = VERTEX_POINT('',#44376); +#44376 = CARTESIAN_POINT('',(-2.45,-2.91,0.4)); +#44377 = LINE('',#44378,#44379); +#44378 = CARTESIAN_POINT('',(-2.45,-2.01,0.4)); +#44379 = VECTOR('',#44380,1.); +#44380 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44381 = ORIENTED_EDGE('',*,*,#44382,.F.); +#44382 = EDGE_CURVE('',#36504,#44375,#44383,.T.); +#44383 = LINE('',#44384,#44385); +#44384 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#44385 = VECTOR('',#44386,1.); +#44386 = DIRECTION('',(0.,0.,1.)); +#44387 = ORIENTED_EDGE('',*,*,#36501,.F.); +#44388 = PLANE('',#44389); +#44389 = AXIS2_PLACEMENT_3D('',#44390,#44391,#44392); +#44390 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#44391 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44392 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44393 = ADVANCED_FACE('',(#44394),#44412,.F.); +#44394 = FACE_BOUND('',#44395,.F.); +#44395 = EDGE_LOOP('',(#44396,#44404,#44410,#44411)); +#44396 = ORIENTED_EDGE('',*,*,#44397,.T.); +#44397 = EDGE_CURVE('',#36520,#44398,#44400,.T.); +#44398 = VERTEX_POINT('',#44399); +#44399 = CARTESIAN_POINT('',(-3.35,-2.01,0.4)); +#44400 = LINE('',#44401,#44402); +#44401 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#44402 = VECTOR('',#44403,1.); +#44403 = DIRECTION('',(0.,0.,1.)); +#44404 = ORIENTED_EDGE('',*,*,#44405,.T.); +#44405 = EDGE_CURVE('',#44398,#44367,#44406,.T.); +#44406 = LINE('',#44407,#44408); +#44407 = CARTESIAN_POINT('',(-3.35,-2.01,0.4)); +#44408 = VECTOR('',#44409,1.); +#44409 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44410 = ORIENTED_EDGE('',*,*,#44366,.F.); +#44411 = ORIENTED_EDGE('',*,*,#36527,.F.); +#44412 = PLANE('',#44413); +#44413 = AXIS2_PLACEMENT_3D('',#44414,#44415,#44416); +#44414 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#44415 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44416 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44417 = ADVANCED_FACE('',(#44418),#44436,.F.); +#44418 = FACE_BOUND('',#44419,.F.); +#44419 = EDGE_LOOP('',(#44420,#44428,#44434,#44435)); +#44420 = ORIENTED_EDGE('',*,*,#44421,.T.); +#44421 = EDGE_CURVE('',#36512,#44422,#44424,.T.); +#44422 = VERTEX_POINT('',#44423); +#44423 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#44424 = LINE('',#44425,#44426); +#44425 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#44426 = VECTOR('',#44427,1.); +#44427 = DIRECTION('',(0.,0.,1.)); +#44428 = ORIENTED_EDGE('',*,*,#44429,.T.); +#44429 = EDGE_CURVE('',#44422,#44398,#44430,.T.); +#44430 = LINE('',#44431,#44432); +#44431 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#44432 = VECTOR('',#44433,1.); +#44433 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44434 = ORIENTED_EDGE('',*,*,#44397,.F.); +#44435 = ORIENTED_EDGE('',*,*,#36519,.F.); +#44436 = PLANE('',#44437); +#44437 = AXIS2_PLACEMENT_3D('',#44438,#44439,#44440); +#44438 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#44439 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44440 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44441 = ADVANCED_FACE('',(#44442),#44453,.F.); +#44442 = FACE_BOUND('',#44443,.F.); +#44443 = EDGE_LOOP('',(#44444,#44445,#44451,#44452)); +#44444 = ORIENTED_EDGE('',*,*,#44382,.T.); +#44445 = ORIENTED_EDGE('',*,*,#44446,.T.); +#44446 = EDGE_CURVE('',#44375,#44422,#44447,.T.); +#44447 = LINE('',#44448,#44449); +#44448 = CARTESIAN_POINT('',(-2.45,-2.91,0.4)); +#44449 = VECTOR('',#44450,1.); +#44450 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44451 = ORIENTED_EDGE('',*,*,#44421,.F.); +#44452 = ORIENTED_EDGE('',*,*,#36511,.F.); +#44453 = PLANE('',#44454); +#44454 = AXIS2_PLACEMENT_3D('',#44455,#44456,#44457); +#44455 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#44456 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44457 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44458 = ADVANCED_FACE('',(#44459),#44484,.F.); +#44459 = FACE_BOUND('',#44460,.F.); +#44460 = EDGE_LOOP('',(#44461,#44469,#44477,#44483)); +#44461 = ORIENTED_EDGE('',*,*,#44462,.T.); +#44462 = EDGE_CURVE('',#36536,#44463,#44465,.T.); +#44463 = VERTEX_POINT('',#44464); +#44464 = CARTESIAN_POINT('',(-1.05,-2.01,0.4)); +#44465 = LINE('',#44466,#44467); +#44466 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#44467 = VECTOR('',#44468,1.); +#44468 = DIRECTION('',(0.,0.,1.)); +#44469 = ORIENTED_EDGE('',*,*,#44470,.T.); +#44470 = EDGE_CURVE('',#44463,#44471,#44473,.T.); +#44471 = VERTEX_POINT('',#44472); +#44472 = CARTESIAN_POINT('',(-1.05,-2.91,0.4)); +#44473 = LINE('',#44474,#44475); +#44474 = CARTESIAN_POINT('',(-1.05,-2.01,0.4)); +#44475 = VECTOR('',#44476,1.); +#44476 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44477 = ORIENTED_EDGE('',*,*,#44478,.F.); +#44478 = EDGE_CURVE('',#36538,#44471,#44479,.T.); +#44479 = LINE('',#44480,#44481); +#44480 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#44481 = VECTOR('',#44482,1.); +#44482 = DIRECTION('',(0.,0.,1.)); +#44483 = ORIENTED_EDGE('',*,*,#36535,.F.); +#44484 = PLANE('',#44485); +#44485 = AXIS2_PLACEMENT_3D('',#44486,#44487,#44488); +#44486 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#44487 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44488 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44489 = ADVANCED_FACE('',(#44490),#44508,.F.); +#44490 = FACE_BOUND('',#44491,.F.); +#44491 = EDGE_LOOP('',(#44492,#44500,#44506,#44507)); +#44492 = ORIENTED_EDGE('',*,*,#44493,.T.); +#44493 = EDGE_CURVE('',#36554,#44494,#44496,.T.); +#44494 = VERTEX_POINT('',#44495); +#44495 = CARTESIAN_POINT('',(-1.95,-2.01,0.4)); +#44496 = LINE('',#44497,#44498); +#44497 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#44498 = VECTOR('',#44499,1.); +#44499 = DIRECTION('',(0.,0.,1.)); +#44500 = ORIENTED_EDGE('',*,*,#44501,.T.); +#44501 = EDGE_CURVE('',#44494,#44463,#44502,.T.); +#44502 = LINE('',#44503,#44504); +#44503 = CARTESIAN_POINT('',(-1.95,-2.01,0.4)); +#44504 = VECTOR('',#44505,1.); +#44505 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44506 = ORIENTED_EDGE('',*,*,#44462,.F.); +#44507 = ORIENTED_EDGE('',*,*,#36561,.F.); +#44508 = PLANE('',#44509); +#44509 = AXIS2_PLACEMENT_3D('',#44510,#44511,#44512); +#44510 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#44511 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44512 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44513 = ADVANCED_FACE('',(#44514),#44532,.F.); +#44514 = FACE_BOUND('',#44515,.F.); +#44515 = EDGE_LOOP('',(#44516,#44524,#44530,#44531)); +#44516 = ORIENTED_EDGE('',*,*,#44517,.T.); +#44517 = EDGE_CURVE('',#36546,#44518,#44520,.T.); +#44518 = VERTEX_POINT('',#44519); +#44519 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#44520 = LINE('',#44521,#44522); +#44521 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#44522 = VECTOR('',#44523,1.); +#44523 = DIRECTION('',(0.,0.,1.)); +#44524 = ORIENTED_EDGE('',*,*,#44525,.T.); +#44525 = EDGE_CURVE('',#44518,#44494,#44526,.T.); +#44526 = LINE('',#44527,#44528); +#44527 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#44528 = VECTOR('',#44529,1.); +#44529 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44530 = ORIENTED_EDGE('',*,*,#44493,.F.); +#44531 = ORIENTED_EDGE('',*,*,#36553,.F.); +#44532 = PLANE('',#44533); +#44533 = AXIS2_PLACEMENT_3D('',#44534,#44535,#44536); +#44534 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#44535 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44536 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44537 = ADVANCED_FACE('',(#44538),#44549,.F.); +#44538 = FACE_BOUND('',#44539,.F.); +#44539 = EDGE_LOOP('',(#44540,#44541,#44547,#44548)); +#44540 = ORIENTED_EDGE('',*,*,#44478,.T.); +#44541 = ORIENTED_EDGE('',*,*,#44542,.T.); +#44542 = EDGE_CURVE('',#44471,#44518,#44543,.T.); +#44543 = LINE('',#44544,#44545); +#44544 = CARTESIAN_POINT('',(-1.05,-2.91,0.4)); +#44545 = VECTOR('',#44546,1.); +#44546 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44547 = ORIENTED_EDGE('',*,*,#44517,.F.); +#44548 = ORIENTED_EDGE('',*,*,#36545,.F.); +#44549 = PLANE('',#44550); +#44550 = AXIS2_PLACEMENT_3D('',#44551,#44552,#44553); +#44551 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#44552 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44553 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44554 = ADVANCED_FACE('',(#44555),#44580,.T.); +#44555 = FACE_BOUND('',#44556,.T.); +#44556 = EDGE_LOOP('',(#44557,#44565,#44573,#44579)); +#44557 = ORIENTED_EDGE('',*,*,#44558,.T.); +#44558 = EDGE_CURVE('',#36570,#44559,#44561,.T.); +#44559 = VERTEX_POINT('',#44560); +#44560 = CARTESIAN_POINT('',(-2.45,-0.61,0.4)); +#44561 = LINE('',#44562,#44563); +#44562 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#44563 = VECTOR('',#44564,1.); +#44564 = DIRECTION('',(0.,0.,1.)); +#44565 = ORIENTED_EDGE('',*,*,#44566,.T.); +#44566 = EDGE_CURVE('',#44559,#44567,#44569,.T.); +#44567 = VERTEX_POINT('',#44568); +#44568 = CARTESIAN_POINT('',(-3.35,-0.61,0.4)); +#44569 = LINE('',#44570,#44571); +#44570 = CARTESIAN_POINT('',(-2.45,-0.61,0.4)); +#44571 = VECTOR('',#44572,1.); +#44572 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44573 = ORIENTED_EDGE('',*,*,#44574,.F.); +#44574 = EDGE_CURVE('',#36572,#44567,#44575,.T.); +#44575 = LINE('',#44576,#44577); +#44576 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#44577 = VECTOR('',#44578,1.); +#44578 = DIRECTION('',(0.,0.,1.)); +#44579 = ORIENTED_EDGE('',*,*,#36569,.F.); +#44580 = PLANE('',#44581); +#44581 = AXIS2_PLACEMENT_3D('',#44582,#44583,#44584); +#44582 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#44583 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44584 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44585 = ADVANCED_FACE('',(#44586),#44604,.T.); +#44586 = FACE_BOUND('',#44587,.T.); +#44587 = EDGE_LOOP('',(#44588,#44589,#44597,#44603)); +#44588 = ORIENTED_EDGE('',*,*,#44574,.T.); +#44589 = ORIENTED_EDGE('',*,*,#44590,.T.); +#44590 = EDGE_CURVE('',#44567,#44591,#44593,.T.); +#44591 = VERTEX_POINT('',#44592); +#44592 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#44593 = LINE('',#44594,#44595); +#44594 = CARTESIAN_POINT('',(-3.35,-0.61,0.4)); +#44595 = VECTOR('',#44596,1.); +#44596 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44597 = ORIENTED_EDGE('',*,*,#44598,.F.); +#44598 = EDGE_CURVE('',#36588,#44591,#44599,.T.); +#44599 = LINE('',#44600,#44601); +#44600 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#44601 = VECTOR('',#44602,1.); +#44602 = DIRECTION('',(0.,0.,1.)); +#44603 = ORIENTED_EDGE('',*,*,#36595,.F.); +#44604 = PLANE('',#44605); +#44605 = AXIS2_PLACEMENT_3D('',#44606,#44607,#44608); +#44606 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#44607 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44608 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44609 = ADVANCED_FACE('',(#44610),#44628,.T.); +#44610 = FACE_BOUND('',#44611,.T.); +#44611 = EDGE_LOOP('',(#44612,#44613,#44621,#44627)); +#44612 = ORIENTED_EDGE('',*,*,#44598,.T.); +#44613 = ORIENTED_EDGE('',*,*,#44614,.T.); +#44614 = EDGE_CURVE('',#44591,#44615,#44617,.T.); +#44615 = VERTEX_POINT('',#44616); +#44616 = CARTESIAN_POINT('',(-2.45,-1.51,0.4)); +#44617 = LINE('',#44618,#44619); +#44618 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#44619 = VECTOR('',#44620,1.); +#44620 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44621 = ORIENTED_EDGE('',*,*,#44622,.F.); +#44622 = EDGE_CURVE('',#36580,#44615,#44623,.T.); +#44623 = LINE('',#44624,#44625); +#44624 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#44625 = VECTOR('',#44626,1.); +#44626 = DIRECTION('',(0.,0.,1.)); +#44627 = ORIENTED_EDGE('',*,*,#36587,.F.); +#44628 = PLANE('',#44629); +#44629 = AXIS2_PLACEMENT_3D('',#44630,#44631,#44632); +#44630 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#44631 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44632 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44633 = ADVANCED_FACE('',(#44634),#44645,.T.); +#44634 = FACE_BOUND('',#44635,.T.); +#44635 = EDGE_LOOP('',(#44636,#44637,#44643,#44644)); +#44636 = ORIENTED_EDGE('',*,*,#44622,.T.); +#44637 = ORIENTED_EDGE('',*,*,#44638,.T.); +#44638 = EDGE_CURVE('',#44615,#44559,#44639,.T.); +#44639 = LINE('',#44640,#44641); +#44640 = CARTESIAN_POINT('',(-2.45,-1.51,0.4)); +#44641 = VECTOR('',#44642,1.); +#44642 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44643 = ORIENTED_EDGE('',*,*,#44558,.F.); +#44644 = ORIENTED_EDGE('',*,*,#36579,.F.); +#44645 = PLANE('',#44646); +#44646 = AXIS2_PLACEMENT_3D('',#44647,#44648,#44649); +#44647 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#44648 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44649 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44650 = ADVANCED_FACE('',(#44651),#44676,.T.); +#44651 = FACE_BOUND('',#44652,.T.); +#44652 = EDGE_LOOP('',(#44653,#44661,#44669,#44675)); +#44653 = ORIENTED_EDGE('',*,*,#44654,.T.); +#44654 = EDGE_CURVE('',#36604,#44655,#44657,.T.); +#44655 = VERTEX_POINT('',#44656); +#44656 = CARTESIAN_POINT('',(-1.05,-0.61,0.4)); +#44657 = LINE('',#44658,#44659); +#44658 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#44659 = VECTOR('',#44660,1.); +#44660 = DIRECTION('',(0.,0.,1.)); +#44661 = ORIENTED_EDGE('',*,*,#44662,.T.); +#44662 = EDGE_CURVE('',#44655,#44663,#44665,.T.); +#44663 = VERTEX_POINT('',#44664); +#44664 = CARTESIAN_POINT('',(-1.95,-0.61,0.4)); +#44665 = LINE('',#44666,#44667); +#44666 = CARTESIAN_POINT('',(-1.05,-0.61,0.4)); +#44667 = VECTOR('',#44668,1.); +#44668 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44669 = ORIENTED_EDGE('',*,*,#44670,.F.); +#44670 = EDGE_CURVE('',#36606,#44663,#44671,.T.); +#44671 = LINE('',#44672,#44673); +#44672 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#44673 = VECTOR('',#44674,1.); +#44674 = DIRECTION('',(0.,0.,1.)); +#44675 = ORIENTED_EDGE('',*,*,#36603,.F.); +#44676 = PLANE('',#44677); +#44677 = AXIS2_PLACEMENT_3D('',#44678,#44679,#44680); +#44678 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#44679 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44680 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44681 = ADVANCED_FACE('',(#44682),#44700,.T.); +#44682 = FACE_BOUND('',#44683,.T.); +#44683 = EDGE_LOOP('',(#44684,#44685,#44693,#44699)); +#44684 = ORIENTED_EDGE('',*,*,#44670,.T.); +#44685 = ORIENTED_EDGE('',*,*,#44686,.T.); +#44686 = EDGE_CURVE('',#44663,#44687,#44689,.T.); +#44687 = VERTEX_POINT('',#44688); +#44688 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#44689 = LINE('',#44690,#44691); +#44690 = CARTESIAN_POINT('',(-1.95,-0.61,0.4)); +#44691 = VECTOR('',#44692,1.); +#44692 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44693 = ORIENTED_EDGE('',*,*,#44694,.F.); +#44694 = EDGE_CURVE('',#36622,#44687,#44695,.T.); +#44695 = LINE('',#44696,#44697); +#44696 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#44697 = VECTOR('',#44698,1.); +#44698 = DIRECTION('',(0.,0.,1.)); +#44699 = ORIENTED_EDGE('',*,*,#36629,.F.); +#44700 = PLANE('',#44701); +#44701 = AXIS2_PLACEMENT_3D('',#44702,#44703,#44704); +#44702 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#44703 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44704 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44705 = ADVANCED_FACE('',(#44706),#44724,.T.); +#44706 = FACE_BOUND('',#44707,.T.); +#44707 = EDGE_LOOP('',(#44708,#44709,#44717,#44723)); +#44708 = ORIENTED_EDGE('',*,*,#44694,.T.); +#44709 = ORIENTED_EDGE('',*,*,#44710,.T.); +#44710 = EDGE_CURVE('',#44687,#44711,#44713,.T.); +#44711 = VERTEX_POINT('',#44712); +#44712 = CARTESIAN_POINT('',(-1.05,-1.51,0.4)); +#44713 = LINE('',#44714,#44715); +#44714 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#44715 = VECTOR('',#44716,1.); +#44716 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44717 = ORIENTED_EDGE('',*,*,#44718,.F.); +#44718 = EDGE_CURVE('',#36614,#44711,#44719,.T.); +#44719 = LINE('',#44720,#44721); +#44720 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#44721 = VECTOR('',#44722,1.); +#44722 = DIRECTION('',(0.,0.,1.)); +#44723 = ORIENTED_EDGE('',*,*,#36621,.F.); +#44724 = PLANE('',#44725); +#44725 = AXIS2_PLACEMENT_3D('',#44726,#44727,#44728); +#44726 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#44727 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44728 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44729 = ADVANCED_FACE('',(#44730),#44741,.T.); +#44730 = FACE_BOUND('',#44731,.T.); +#44731 = EDGE_LOOP('',(#44732,#44733,#44739,#44740)); +#44732 = ORIENTED_EDGE('',*,*,#44718,.T.); +#44733 = ORIENTED_EDGE('',*,*,#44734,.T.); +#44734 = EDGE_CURVE('',#44711,#44655,#44735,.T.); +#44735 = LINE('',#44736,#44737); +#44736 = CARTESIAN_POINT('',(-1.05,-1.51,0.4)); +#44737 = VECTOR('',#44738,1.); +#44738 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44739 = ORIENTED_EDGE('',*,*,#44654,.F.); +#44740 = ORIENTED_EDGE('',*,*,#36613,.F.); +#44741 = PLANE('',#44742); +#44742 = AXIS2_PLACEMENT_3D('',#44743,#44744,#44745); +#44743 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#44744 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44745 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44746 = ADVANCED_FACE('',(#44747),#44772,.T.); +#44747 = FACE_BOUND('',#44748,.T.); +#44748 = EDGE_LOOP('',(#44749,#44757,#44765,#44771)); +#44749 = ORIENTED_EDGE('',*,*,#44750,.T.); +#44750 = EDGE_CURVE('',#36638,#44751,#44753,.T.); +#44751 = VERTEX_POINT('',#44752); +#44752 = CARTESIAN_POINT('',(0.35,-2.01,0.4)); +#44753 = LINE('',#44754,#44755); +#44754 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#44755 = VECTOR('',#44756,1.); +#44756 = DIRECTION('',(0.,0.,1.)); +#44757 = ORIENTED_EDGE('',*,*,#44758,.T.); +#44758 = EDGE_CURVE('',#44751,#44759,#44761,.T.); +#44759 = VERTEX_POINT('',#44760); +#44760 = CARTESIAN_POINT('',(-0.55,-2.01,0.4)); +#44761 = LINE('',#44762,#44763); +#44762 = CARTESIAN_POINT('',(0.35,-2.01,0.4)); +#44763 = VECTOR('',#44764,1.); +#44764 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44765 = ORIENTED_EDGE('',*,*,#44766,.F.); +#44766 = EDGE_CURVE('',#36640,#44759,#44767,.T.); +#44767 = LINE('',#44768,#44769); +#44768 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#44769 = VECTOR('',#44770,1.); +#44770 = DIRECTION('',(0.,0.,1.)); +#44771 = ORIENTED_EDGE('',*,*,#36637,.F.); +#44772 = PLANE('',#44773); +#44773 = AXIS2_PLACEMENT_3D('',#44774,#44775,#44776); +#44774 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#44775 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44776 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44777 = ADVANCED_FACE('',(#44778),#44796,.T.); +#44778 = FACE_BOUND('',#44779,.T.); +#44779 = EDGE_LOOP('',(#44780,#44781,#44789,#44795)); +#44780 = ORIENTED_EDGE('',*,*,#44766,.T.); +#44781 = ORIENTED_EDGE('',*,*,#44782,.T.); +#44782 = EDGE_CURVE('',#44759,#44783,#44785,.T.); +#44783 = VERTEX_POINT('',#44784); +#44784 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#44785 = LINE('',#44786,#44787); +#44786 = CARTESIAN_POINT('',(-0.55,-2.01,0.4)); +#44787 = VECTOR('',#44788,1.); +#44788 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44789 = ORIENTED_EDGE('',*,*,#44790,.F.); +#44790 = EDGE_CURVE('',#36656,#44783,#44791,.T.); +#44791 = LINE('',#44792,#44793); +#44792 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#44793 = VECTOR('',#44794,1.); +#44794 = DIRECTION('',(0.,0.,1.)); +#44795 = ORIENTED_EDGE('',*,*,#36663,.F.); +#44796 = PLANE('',#44797); +#44797 = AXIS2_PLACEMENT_3D('',#44798,#44799,#44800); +#44798 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#44799 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44800 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44801 = ADVANCED_FACE('',(#44802),#44820,.T.); +#44802 = FACE_BOUND('',#44803,.T.); +#44803 = EDGE_LOOP('',(#44804,#44805,#44813,#44819)); +#44804 = ORIENTED_EDGE('',*,*,#44790,.T.); +#44805 = ORIENTED_EDGE('',*,*,#44806,.T.); +#44806 = EDGE_CURVE('',#44783,#44807,#44809,.T.); +#44807 = VERTEX_POINT('',#44808); +#44808 = CARTESIAN_POINT('',(0.35,-2.91,0.4)); +#44809 = LINE('',#44810,#44811); +#44810 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#44811 = VECTOR('',#44812,1.); +#44812 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44813 = ORIENTED_EDGE('',*,*,#44814,.F.); +#44814 = EDGE_CURVE('',#36648,#44807,#44815,.T.); +#44815 = LINE('',#44816,#44817); +#44816 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#44817 = VECTOR('',#44818,1.); +#44818 = DIRECTION('',(0.,0.,1.)); +#44819 = ORIENTED_EDGE('',*,*,#36655,.F.); +#44820 = PLANE('',#44821); +#44821 = AXIS2_PLACEMENT_3D('',#44822,#44823,#44824); +#44822 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#44823 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44824 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44825 = ADVANCED_FACE('',(#44826),#44837,.T.); +#44826 = FACE_BOUND('',#44827,.T.); +#44827 = EDGE_LOOP('',(#44828,#44829,#44835,#44836)); +#44828 = ORIENTED_EDGE('',*,*,#44814,.T.); +#44829 = ORIENTED_EDGE('',*,*,#44830,.T.); +#44830 = EDGE_CURVE('',#44807,#44751,#44831,.T.); +#44831 = LINE('',#44832,#44833); +#44832 = CARTESIAN_POINT('',(0.35,-2.91,0.4)); +#44833 = VECTOR('',#44834,1.); +#44834 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44835 = ORIENTED_EDGE('',*,*,#44750,.F.); +#44836 = ORIENTED_EDGE('',*,*,#36647,.F.); +#44837 = PLANE('',#44838); +#44838 = AXIS2_PLACEMENT_3D('',#44839,#44840,#44841); +#44839 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#44840 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44841 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44842 = ADVANCED_FACE('',(#44843),#44868,.T.); +#44843 = FACE_BOUND('',#44844,.T.); +#44844 = EDGE_LOOP('',(#44845,#44853,#44861,#44867)); +#44845 = ORIENTED_EDGE('',*,*,#44846,.T.); +#44846 = EDGE_CURVE('',#36672,#44847,#44849,.T.); +#44847 = VERTEX_POINT('',#44848); +#44848 = CARTESIAN_POINT('',(0.35,-0.61,0.4)); +#44849 = LINE('',#44850,#44851); +#44850 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#44851 = VECTOR('',#44852,1.); +#44852 = DIRECTION('',(0.,0.,1.)); +#44853 = ORIENTED_EDGE('',*,*,#44854,.T.); +#44854 = EDGE_CURVE('',#44847,#44855,#44857,.T.); +#44855 = VERTEX_POINT('',#44856); +#44856 = CARTESIAN_POINT('',(-0.55,-0.61,0.4)); +#44857 = LINE('',#44858,#44859); +#44858 = CARTESIAN_POINT('',(0.35,-0.61,0.4)); +#44859 = VECTOR('',#44860,1.); +#44860 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44861 = ORIENTED_EDGE('',*,*,#44862,.F.); +#44862 = EDGE_CURVE('',#36674,#44855,#44863,.T.); +#44863 = LINE('',#44864,#44865); +#44864 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#44865 = VECTOR('',#44866,1.); +#44866 = DIRECTION('',(0.,0.,1.)); +#44867 = ORIENTED_EDGE('',*,*,#36671,.F.); +#44868 = PLANE('',#44869); +#44869 = AXIS2_PLACEMENT_3D('',#44870,#44871,#44872); +#44870 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#44871 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44872 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44873 = ADVANCED_FACE('',(#44874),#44892,.T.); +#44874 = FACE_BOUND('',#44875,.T.); +#44875 = EDGE_LOOP('',(#44876,#44877,#44885,#44891)); +#44876 = ORIENTED_EDGE('',*,*,#44862,.T.); +#44877 = ORIENTED_EDGE('',*,*,#44878,.T.); +#44878 = EDGE_CURVE('',#44855,#44879,#44881,.T.); +#44879 = VERTEX_POINT('',#44880); +#44880 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#44881 = LINE('',#44882,#44883); +#44882 = CARTESIAN_POINT('',(-0.55,-0.61,0.4)); +#44883 = VECTOR('',#44884,1.); +#44884 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44885 = ORIENTED_EDGE('',*,*,#44886,.F.); +#44886 = EDGE_CURVE('',#36690,#44879,#44887,.T.); +#44887 = LINE('',#44888,#44889); +#44888 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#44889 = VECTOR('',#44890,1.); +#44890 = DIRECTION('',(0.,0.,1.)); +#44891 = ORIENTED_EDGE('',*,*,#36697,.F.); +#44892 = PLANE('',#44893); +#44893 = AXIS2_PLACEMENT_3D('',#44894,#44895,#44896); +#44894 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#44895 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44896 = DIRECTION('',(1.224646799147E-16,-1.,0.)); +#44897 = ADVANCED_FACE('',(#44898),#44916,.T.); +#44898 = FACE_BOUND('',#44899,.T.); +#44899 = EDGE_LOOP('',(#44900,#44901,#44909,#44915)); +#44900 = ORIENTED_EDGE('',*,*,#44886,.T.); +#44901 = ORIENTED_EDGE('',*,*,#44902,.T.); +#44902 = EDGE_CURVE('',#44879,#44903,#44905,.T.); +#44903 = VERTEX_POINT('',#44904); +#44904 = CARTESIAN_POINT('',(0.35,-1.51,0.4)); +#44905 = LINE('',#44906,#44907); +#44906 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#44907 = VECTOR('',#44908,1.); +#44908 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44909 = ORIENTED_EDGE('',*,*,#44910,.F.); +#44910 = EDGE_CURVE('',#36682,#44903,#44911,.T.); +#44911 = LINE('',#44912,#44913); +#44912 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#44913 = VECTOR('',#44914,1.); +#44914 = DIRECTION('',(0.,0.,1.)); +#44915 = ORIENTED_EDGE('',*,*,#36689,.F.); +#44916 = PLANE('',#44917); +#44917 = AXIS2_PLACEMENT_3D('',#44918,#44919,#44920); +#44918 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#44919 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44920 = DIRECTION('',(1.,1.224646799147E-16,0.)); +#44921 = ADVANCED_FACE('',(#44922),#44933,.T.); +#44922 = FACE_BOUND('',#44923,.T.); +#44923 = EDGE_LOOP('',(#44924,#44925,#44931,#44932)); +#44924 = ORIENTED_EDGE('',*,*,#44910,.T.); +#44925 = ORIENTED_EDGE('',*,*,#44926,.T.); +#44926 = EDGE_CURVE('',#44903,#44847,#44927,.T.); +#44927 = LINE('',#44928,#44929); +#44928 = CARTESIAN_POINT('',(0.35,-1.51,0.4)); +#44929 = VECTOR('',#44930,1.); +#44930 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44931 = ORIENTED_EDGE('',*,*,#44846,.F.); +#44932 = ORIENTED_EDGE('',*,*,#36681,.F.); +#44933 = PLANE('',#44934); +#44934 = AXIS2_PLACEMENT_3D('',#44935,#44936,#44937); +#44935 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#44936 = DIRECTION('',(-1.,-1.224646799147E-16,0.)); +#44937 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#44938 = ADVANCED_FACE('',(#44939),#44955,.T.); +#44939 = FACE_BOUND('',#44940,.F.); +#44940 = EDGE_LOOP('',(#44941,#44942,#44948,#44954)); +#44941 = ORIENTED_EDGE('',*,*,#38075,.T.); +#44942 = ORIENTED_EDGE('',*,*,#44943,.T.); +#44943 = EDGE_CURVE('',#38050,#38211,#44944,.T.); +#44944 = LINE('',#44945,#44946); +#44945 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#44946 = VECTOR('',#44947,1.); +#44947 = DIRECTION('',(-0.,-1.,-0.)); +#44948 = ORIENTED_EDGE('',*,*,#44949,.F.); +#44949 = EDGE_CURVE('',#37978,#38211,#44950,.T.); +#44950 = LINE('',#44951,#44952); +#44951 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#44952 = VECTOR('',#44953,1.); +#44953 = DIRECTION('',(0.,0.,-1.)); +#44954 = ORIENTED_EDGE('',*,*,#37985,.F.); +#44955 = PLANE('',#44956); +#44956 = AXIS2_PLACEMENT_3D('',#44957,#44958,#44959); +#44957 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#44958 = DIRECTION('',(1.,0.,0.)); +#44959 = DIRECTION('',(-0.,1.,0.)); +#44960 = ADVANCED_FACE('',(#44961),#44967,.T.); +#44961 = FACE_BOUND('',#44962,.F.); +#44962 = EDGE_LOOP('',(#44963,#44964,#44965,#44966)); +#44963 = ORIENTED_EDGE('',*,*,#44949,.T.); +#44964 = ORIENTED_EDGE('',*,*,#38258,.T.); +#44965 = ORIENTED_EDGE('',*,*,#38315,.F.); +#44966 = ORIENTED_EDGE('',*,*,#37977,.F.); +#44967 = PLANE('',#44968); +#44968 = AXIS2_PLACEMENT_3D('',#44969,#44970,#44971); +#44969 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#44970 = DIRECTION('',(0.,1.,0.)); +#44971 = DIRECTION('',(-1.,0.,0.)); +#44972 = ADVANCED_FACE('',(#44973),#44984,.T.); +#44973 = FACE_BOUND('',#44974,.F.); +#44974 = EDGE_LOOP('',(#44975,#44976,#44977,#44983)); +#44975 = ORIENTED_EDGE('',*,*,#38322,.T.); +#44976 = ORIENTED_EDGE('',*,*,#38368,.T.); +#44977 = ORIENTED_EDGE('',*,*,#44978,.F.); +#44978 = EDGE_CURVE('',#37954,#38369,#44979,.T.); +#44979 = LINE('',#44980,#44981); +#44980 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#44981 = VECTOR('',#44982,1.); +#44982 = DIRECTION('',(0.,0.,-1.)); +#44983 = ORIENTED_EDGE('',*,*,#37961,.F.); +#44984 = PLANE('',#44985); +#44985 = AXIS2_PLACEMENT_3D('',#44986,#44987,#44988); +#44986 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#44987 = DIRECTION('',(-0.,-1.,-0.)); +#44988 = DIRECTION('',(1.,-0.,0.)); +#44989 = ADVANCED_FACE('',(#44990),#45006,.T.); +#44990 = FACE_BOUND('',#44991,.F.); +#44991 = EDGE_LOOP('',(#44992,#44993,#44999,#45005)); +#44992 = ORIENTED_EDGE('',*,*,#44978,.T.); +#44993 = ORIENTED_EDGE('',*,*,#44994,.T.); +#44994 = EDGE_CURVE('',#38369,#38513,#44995,.T.); +#44995 = LINE('',#44996,#44997); +#44996 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#44997 = VECTOR('',#44998,1.); +#44998 = DIRECTION('',(-0.,-1.,-0.)); +#44999 = ORIENTED_EDGE('',*,*,#45000,.F.); +#45000 = EDGE_CURVE('',#37946,#38513,#45001,.T.); +#45001 = LINE('',#45002,#45003); +#45002 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#45003 = VECTOR('',#45004,1.); +#45004 = DIRECTION('',(0.,0.,-1.)); +#45005 = ORIENTED_EDGE('',*,*,#37953,.F.); +#45006 = PLANE('',#45007); +#45007 = AXIS2_PLACEMENT_3D('',#45008,#45009,#45010); +#45008 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#45009 = DIRECTION('',(1.,0.,0.)); +#45010 = DIRECTION('',(-0.,1.,0.)); +#45011 = ADVANCED_FACE('',(#45012),#45018,.T.); +#45012 = FACE_BOUND('',#45013,.F.); +#45013 = EDGE_LOOP('',(#45014,#45015,#45016,#45017)); +#45014 = ORIENTED_EDGE('',*,*,#45000,.T.); +#45015 = ORIENTED_EDGE('',*,*,#38560,.T.); +#45016 = ORIENTED_EDGE('',*,*,#38617,.F.); +#45017 = ORIENTED_EDGE('',*,*,#37945,.F.); +#45018 = PLANE('',#45019); +#45019 = AXIS2_PLACEMENT_3D('',#45020,#45021,#45022); +#45020 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#45021 = DIRECTION('',(0.,1.,0.)); +#45022 = DIRECTION('',(-1.,0.,0.)); +#45023 = ADVANCED_FACE('',(#45024),#45035,.T.); +#45024 = FACE_BOUND('',#45025,.F.); +#45025 = EDGE_LOOP('',(#45026,#45027,#45028,#45034)); +#45026 = ORIENTED_EDGE('',*,*,#38624,.T.); +#45027 = ORIENTED_EDGE('',*,*,#38670,.T.); +#45028 = ORIENTED_EDGE('',*,*,#45029,.F.); +#45029 = EDGE_CURVE('',#37922,#38671,#45030,.T.); +#45030 = LINE('',#45031,#45032); +#45031 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#45032 = VECTOR('',#45033,1.); +#45033 = DIRECTION('',(0.,0.,-1.)); +#45034 = ORIENTED_EDGE('',*,*,#37929,.F.); +#45035 = PLANE('',#45036); +#45036 = AXIS2_PLACEMENT_3D('',#45037,#45038,#45039); +#45037 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#45038 = DIRECTION('',(-0.,-1.,-0.)); +#45039 = DIRECTION('',(1.,-0.,0.)); +#45040 = ADVANCED_FACE('',(#45041),#45057,.T.); +#45041 = FACE_BOUND('',#45042,.F.); +#45042 = EDGE_LOOP('',(#45043,#45044,#45050,#45056)); +#45043 = ORIENTED_EDGE('',*,*,#45029,.T.); +#45044 = ORIENTED_EDGE('',*,*,#45045,.T.); +#45045 = EDGE_CURVE('',#38671,#38815,#45046,.T.); +#45046 = LINE('',#45047,#45048); +#45047 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#45048 = VECTOR('',#45049,1.); +#45049 = DIRECTION('',(-0.,-1.,-0.)); +#45050 = ORIENTED_EDGE('',*,*,#45051,.F.); +#45051 = EDGE_CURVE('',#37914,#38815,#45052,.T.); +#45052 = LINE('',#45053,#45054); +#45053 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#45054 = VECTOR('',#45055,1.); +#45055 = DIRECTION('',(0.,0.,-1.)); +#45056 = ORIENTED_EDGE('',*,*,#37921,.F.); +#45057 = PLANE('',#45058); +#45058 = AXIS2_PLACEMENT_3D('',#45059,#45060,#45061); +#45059 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#45060 = DIRECTION('',(1.,0.,0.)); +#45061 = DIRECTION('',(-0.,1.,0.)); +#45062 = ADVANCED_FACE('',(#45063),#45069,.T.); +#45063 = FACE_BOUND('',#45064,.F.); +#45064 = EDGE_LOOP('',(#45065,#45066,#45067,#45068)); +#45065 = ORIENTED_EDGE('',*,*,#45051,.T.); +#45066 = ORIENTED_EDGE('',*,*,#38862,.T.); +#45067 = ORIENTED_EDGE('',*,*,#38919,.F.); +#45068 = ORIENTED_EDGE('',*,*,#37913,.F.); +#45069 = PLANE('',#45070); +#45070 = AXIS2_PLACEMENT_3D('',#45071,#45072,#45073); +#45071 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#45072 = DIRECTION('',(0.,1.,0.)); +#45073 = DIRECTION('',(-1.,0.,0.)); +#45074 = ADVANCED_FACE('',(#45075),#45086,.T.); +#45075 = FACE_BOUND('',#45076,.F.); +#45076 = EDGE_LOOP('',(#45077,#45078,#45079,#45085)); +#45077 = ORIENTED_EDGE('',*,*,#38926,.T.); +#45078 = ORIENTED_EDGE('',*,*,#38972,.T.); +#45079 = ORIENTED_EDGE('',*,*,#45080,.F.); +#45080 = EDGE_CURVE('',#37890,#38973,#45081,.T.); +#45081 = LINE('',#45082,#45083); +#45082 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#45083 = VECTOR('',#45084,1.); +#45084 = DIRECTION('',(0.,0.,-1.)); +#45085 = ORIENTED_EDGE('',*,*,#37897,.F.); +#45086 = PLANE('',#45087); +#45087 = AXIS2_PLACEMENT_3D('',#45088,#45089,#45090); +#45088 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#45089 = DIRECTION('',(-0.,-1.,-0.)); +#45090 = DIRECTION('',(1.,-0.,0.)); +#45091 = ADVANCED_FACE('',(#45092),#45108,.T.); +#45092 = FACE_BOUND('',#45093,.F.); +#45093 = EDGE_LOOP('',(#45094,#45095,#45101,#45107)); +#45094 = ORIENTED_EDGE('',*,*,#45080,.T.); +#45095 = ORIENTED_EDGE('',*,*,#45096,.T.); +#45096 = EDGE_CURVE('',#38973,#39117,#45097,.T.); +#45097 = LINE('',#45098,#45099); +#45098 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#45099 = VECTOR('',#45100,1.); +#45100 = DIRECTION('',(-0.,-1.,-0.)); +#45101 = ORIENTED_EDGE('',*,*,#45102,.F.); +#45102 = EDGE_CURVE('',#37882,#39117,#45103,.T.); +#45103 = LINE('',#45104,#45105); +#45104 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#45105 = VECTOR('',#45106,1.); +#45106 = DIRECTION('',(0.,0.,-1.)); +#45107 = ORIENTED_EDGE('',*,*,#37889,.F.); +#45108 = PLANE('',#45109); +#45109 = AXIS2_PLACEMENT_3D('',#45110,#45111,#45112); +#45110 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#45111 = DIRECTION('',(1.,0.,0.)); +#45112 = DIRECTION('',(-0.,1.,0.)); +#45113 = ADVANCED_FACE('',(#45114),#45120,.T.); +#45114 = FACE_BOUND('',#45115,.F.); +#45115 = EDGE_LOOP('',(#45116,#45117,#45118,#45119)); +#45116 = ORIENTED_EDGE('',*,*,#45102,.T.); +#45117 = ORIENTED_EDGE('',*,*,#39164,.T.); +#45118 = ORIENTED_EDGE('',*,*,#39221,.F.); +#45119 = ORIENTED_EDGE('',*,*,#37881,.F.); +#45120 = PLANE('',#45121); +#45121 = AXIS2_PLACEMENT_3D('',#45122,#45123,#45124); +#45122 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#45123 = DIRECTION('',(0.,1.,0.)); +#45124 = DIRECTION('',(-1.,0.,0.)); +#45125 = ADVANCED_FACE('',(#45126),#45137,.T.); +#45126 = FACE_BOUND('',#45127,.F.); +#45127 = EDGE_LOOP('',(#45128,#45129,#45130,#45136)); +#45128 = ORIENTED_EDGE('',*,*,#39228,.T.); +#45129 = ORIENTED_EDGE('',*,*,#39274,.T.); +#45130 = ORIENTED_EDGE('',*,*,#45131,.F.); +#45131 = EDGE_CURVE('',#37858,#39275,#45132,.T.); +#45132 = LINE('',#45133,#45134); +#45133 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#45134 = VECTOR('',#45135,1.); +#45135 = DIRECTION('',(0.,0.,-1.)); +#45136 = ORIENTED_EDGE('',*,*,#37865,.F.); +#45137 = PLANE('',#45138); +#45138 = AXIS2_PLACEMENT_3D('',#45139,#45140,#45141); +#45139 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#45140 = DIRECTION('',(-0.,-1.,-0.)); +#45141 = DIRECTION('',(1.,-0.,0.)); +#45142 = ADVANCED_FACE('',(#45143),#45159,.T.); +#45143 = FACE_BOUND('',#45144,.F.); +#45144 = EDGE_LOOP('',(#45145,#45146,#45152,#45158)); +#45145 = ORIENTED_EDGE('',*,*,#45131,.T.); +#45146 = ORIENTED_EDGE('',*,*,#45147,.T.); +#45147 = EDGE_CURVE('',#39275,#39419,#45148,.T.); +#45148 = LINE('',#45149,#45150); +#45149 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#45150 = VECTOR('',#45151,1.); +#45151 = DIRECTION('',(-0.,-1.,-0.)); +#45152 = ORIENTED_EDGE('',*,*,#45153,.F.); +#45153 = EDGE_CURVE('',#37850,#39419,#45154,.T.); +#45154 = LINE('',#45155,#45156); +#45155 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#45156 = VECTOR('',#45157,1.); +#45157 = DIRECTION('',(0.,0.,-1.)); +#45158 = ORIENTED_EDGE('',*,*,#37857,.F.); +#45159 = PLANE('',#45160); +#45160 = AXIS2_PLACEMENT_3D('',#45161,#45162,#45163); +#45161 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#45162 = DIRECTION('',(1.,0.,0.)); +#45163 = DIRECTION('',(-0.,1.,0.)); +#45164 = ADVANCED_FACE('',(#45165),#45171,.T.); +#45165 = FACE_BOUND('',#45166,.F.); +#45166 = EDGE_LOOP('',(#45167,#45168,#45169,#45170)); +#45167 = ORIENTED_EDGE('',*,*,#45153,.T.); +#45168 = ORIENTED_EDGE('',*,*,#39466,.T.); +#45169 = ORIENTED_EDGE('',*,*,#39523,.F.); +#45170 = ORIENTED_EDGE('',*,*,#37849,.F.); +#45171 = PLANE('',#45172); +#45172 = AXIS2_PLACEMENT_3D('',#45173,#45174,#45175); +#45173 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#45174 = DIRECTION('',(0.,1.,0.)); +#45175 = DIRECTION('',(-1.,0.,0.)); +#45176 = ADVANCED_FACE('',(#45177),#45188,.T.); +#45177 = FACE_BOUND('',#45178,.F.); +#45178 = EDGE_LOOP('',(#45179,#45180,#45181,#45187)); +#45179 = ORIENTED_EDGE('',*,*,#39530,.T.); +#45180 = ORIENTED_EDGE('',*,*,#39576,.T.); +#45181 = ORIENTED_EDGE('',*,*,#45182,.F.); +#45182 = EDGE_CURVE('',#37826,#39577,#45183,.T.); +#45183 = LINE('',#45184,#45185); +#45184 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#45185 = VECTOR('',#45186,1.); +#45186 = DIRECTION('',(0.,0.,-1.)); +#45187 = ORIENTED_EDGE('',*,*,#37833,.F.); +#45188 = PLANE('',#45189); +#45189 = AXIS2_PLACEMENT_3D('',#45190,#45191,#45192); +#45190 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#45191 = DIRECTION('',(-0.,-1.,-0.)); +#45192 = DIRECTION('',(1.,-0.,0.)); +#45193 = ADVANCED_FACE('',(#45194),#45210,.T.); +#45194 = FACE_BOUND('',#45195,.F.); +#45195 = EDGE_LOOP('',(#45196,#45197,#45203,#45209)); +#45196 = ORIENTED_EDGE('',*,*,#45182,.T.); +#45197 = ORIENTED_EDGE('',*,*,#45198,.T.); +#45198 = EDGE_CURVE('',#39577,#39721,#45199,.T.); +#45199 = LINE('',#45200,#45201); +#45200 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#45201 = VECTOR('',#45202,1.); +#45202 = DIRECTION('',(-0.,-1.,-0.)); +#45203 = ORIENTED_EDGE('',*,*,#45204,.F.); +#45204 = EDGE_CURVE('',#37818,#39721,#45205,.T.); +#45205 = LINE('',#45206,#45207); +#45206 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#45207 = VECTOR('',#45208,1.); +#45208 = DIRECTION('',(0.,0.,-1.)); +#45209 = ORIENTED_EDGE('',*,*,#37825,.F.); +#45210 = PLANE('',#45211); +#45211 = AXIS2_PLACEMENT_3D('',#45212,#45213,#45214); +#45212 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#45213 = DIRECTION('',(1.,0.,0.)); +#45214 = DIRECTION('',(-0.,1.,0.)); +#45215 = ADVANCED_FACE('',(#45216),#45222,.T.); +#45216 = FACE_BOUND('',#45217,.F.); +#45217 = EDGE_LOOP('',(#45218,#45219,#45220,#45221)); +#45218 = ORIENTED_EDGE('',*,*,#45204,.T.); +#45219 = ORIENTED_EDGE('',*,*,#39768,.T.); +#45220 = ORIENTED_EDGE('',*,*,#39825,.F.); +#45221 = ORIENTED_EDGE('',*,*,#37817,.F.); +#45222 = PLANE('',#45223); +#45223 = AXIS2_PLACEMENT_3D('',#45224,#45225,#45226); +#45224 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#45225 = DIRECTION('',(0.,1.,0.)); +#45226 = DIRECTION('',(-1.,0.,0.)); +#45227 = ADVANCED_FACE('',(#45228),#45239,.T.); +#45228 = FACE_BOUND('',#45229,.F.); +#45229 = EDGE_LOOP('',(#45230,#45231,#45232,#45238)); +#45230 = ORIENTED_EDGE('',*,*,#39832,.T.); +#45231 = ORIENTED_EDGE('',*,*,#39878,.T.); +#45232 = ORIENTED_EDGE('',*,*,#45233,.F.); +#45233 = EDGE_CURVE('',#37794,#39879,#45234,.T.); +#45234 = LINE('',#45235,#45236); +#45235 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#45236 = VECTOR('',#45237,1.); +#45237 = DIRECTION('',(0.,0.,-1.)); +#45238 = ORIENTED_EDGE('',*,*,#37801,.F.); +#45239 = PLANE('',#45240); +#45240 = AXIS2_PLACEMENT_3D('',#45241,#45242,#45243); +#45241 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#45242 = DIRECTION('',(-0.,-1.,-0.)); +#45243 = DIRECTION('',(1.,-0.,0.)); +#45244 = ADVANCED_FACE('',(#45245),#45261,.T.); +#45245 = FACE_BOUND('',#45246,.F.); +#45246 = EDGE_LOOP('',(#45247,#45248,#45254,#45260)); +#45247 = ORIENTED_EDGE('',*,*,#45233,.T.); +#45248 = ORIENTED_EDGE('',*,*,#45249,.T.); +#45249 = EDGE_CURVE('',#39879,#40023,#45250,.T.); +#45250 = LINE('',#45251,#45252); +#45251 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#45252 = VECTOR('',#45253,1.); +#45253 = DIRECTION('',(-0.,-1.,-0.)); +#45254 = ORIENTED_EDGE('',*,*,#45255,.F.); +#45255 = EDGE_CURVE('',#37786,#40023,#45256,.T.); +#45256 = LINE('',#45257,#45258); +#45257 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#45258 = VECTOR('',#45259,1.); +#45259 = DIRECTION('',(0.,0.,-1.)); +#45260 = ORIENTED_EDGE('',*,*,#37793,.F.); +#45261 = PLANE('',#45262); +#45262 = AXIS2_PLACEMENT_3D('',#45263,#45264,#45265); +#45263 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#45264 = DIRECTION('',(1.,0.,0.)); +#45265 = DIRECTION('',(-0.,1.,0.)); +#45266 = ADVANCED_FACE('',(#45267),#45273,.T.); +#45267 = FACE_BOUND('',#45268,.F.); +#45268 = EDGE_LOOP('',(#45269,#45270,#45271,#45272)); +#45269 = ORIENTED_EDGE('',*,*,#45255,.T.); +#45270 = ORIENTED_EDGE('',*,*,#40070,.T.); +#45271 = ORIENTED_EDGE('',*,*,#40127,.F.); +#45272 = ORIENTED_EDGE('',*,*,#37785,.F.); +#45273 = PLANE('',#45274); +#45274 = AXIS2_PLACEMENT_3D('',#45275,#45276,#45277); +#45275 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#45276 = DIRECTION('',(0.,1.,0.)); +#45277 = DIRECTION('',(-1.,0.,0.)); +#45278 = ADVANCED_FACE('',(#45279),#45290,.T.); +#45279 = FACE_BOUND('',#45280,.F.); +#45280 = EDGE_LOOP('',(#45281,#45282,#45283,#45289)); +#45281 = ORIENTED_EDGE('',*,*,#40134,.T.); +#45282 = ORIENTED_EDGE('',*,*,#40180,.T.); +#45283 = ORIENTED_EDGE('',*,*,#45284,.F.); +#45284 = EDGE_CURVE('',#37762,#40181,#45285,.T.); +#45285 = LINE('',#45286,#45287); +#45286 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#45287 = VECTOR('',#45288,1.); +#45288 = DIRECTION('',(0.,0.,-1.)); +#45289 = ORIENTED_EDGE('',*,*,#37769,.F.); +#45290 = PLANE('',#45291); +#45291 = AXIS2_PLACEMENT_3D('',#45292,#45293,#45294); +#45292 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#45293 = DIRECTION('',(-0.,-1.,-0.)); +#45294 = DIRECTION('',(1.,-0.,0.)); +#45295 = ADVANCED_FACE('',(#45296),#45312,.T.); +#45296 = FACE_BOUND('',#45297,.F.); +#45297 = EDGE_LOOP('',(#45298,#45299,#45305,#45311)); +#45298 = ORIENTED_EDGE('',*,*,#45284,.T.); +#45299 = ORIENTED_EDGE('',*,*,#45300,.T.); +#45300 = EDGE_CURVE('',#40181,#40325,#45301,.T.); +#45301 = LINE('',#45302,#45303); +#45302 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#45303 = VECTOR('',#45304,1.); +#45304 = DIRECTION('',(-0.,-1.,-0.)); +#45305 = ORIENTED_EDGE('',*,*,#45306,.F.); +#45306 = EDGE_CURVE('',#37754,#40325,#45307,.T.); +#45307 = LINE('',#45308,#45309); +#45308 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#45309 = VECTOR('',#45310,1.); +#45310 = DIRECTION('',(0.,0.,-1.)); +#45311 = ORIENTED_EDGE('',*,*,#37761,.F.); +#45312 = PLANE('',#45313); +#45313 = AXIS2_PLACEMENT_3D('',#45314,#45315,#45316); +#45314 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#45315 = DIRECTION('',(1.,0.,0.)); +#45316 = DIRECTION('',(-0.,1.,0.)); +#45317 = ADVANCED_FACE('',(#45318),#45324,.T.); +#45318 = FACE_BOUND('',#45319,.F.); +#45319 = EDGE_LOOP('',(#45320,#45321,#45322,#45323)); +#45320 = ORIENTED_EDGE('',*,*,#45306,.T.); +#45321 = ORIENTED_EDGE('',*,*,#40372,.T.); +#45322 = ORIENTED_EDGE('',*,*,#40429,.F.); +#45323 = ORIENTED_EDGE('',*,*,#37753,.F.); +#45324 = PLANE('',#45325); +#45325 = AXIS2_PLACEMENT_3D('',#45326,#45327,#45328); +#45326 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#45327 = DIRECTION('',(0.,1.,0.)); +#45328 = DIRECTION('',(-1.,0.,0.)); +#45329 = ADVANCED_FACE('',(#45330),#45341,.T.); +#45330 = FACE_BOUND('',#45331,.F.); +#45331 = EDGE_LOOP('',(#45332,#45333,#45334,#45340)); +#45332 = ORIENTED_EDGE('',*,*,#40436,.T.); +#45333 = ORIENTED_EDGE('',*,*,#40482,.T.); +#45334 = ORIENTED_EDGE('',*,*,#45335,.F.); +#45335 = EDGE_CURVE('',#37730,#40483,#45336,.T.); +#45336 = LINE('',#45337,#45338); +#45337 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#45338 = VECTOR('',#45339,1.); +#45339 = DIRECTION('',(0.,0.,-1.)); +#45340 = ORIENTED_EDGE('',*,*,#37737,.F.); +#45341 = PLANE('',#45342); +#45342 = AXIS2_PLACEMENT_3D('',#45343,#45344,#45345); +#45343 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#45344 = DIRECTION('',(-0.,-1.,-0.)); +#45345 = DIRECTION('',(1.,-0.,0.)); +#45346 = ADVANCED_FACE('',(#45347),#45363,.T.); +#45347 = FACE_BOUND('',#45348,.F.); +#45348 = EDGE_LOOP('',(#45349,#45350,#45356,#45362)); +#45349 = ORIENTED_EDGE('',*,*,#45335,.T.); +#45350 = ORIENTED_EDGE('',*,*,#45351,.T.); +#45351 = EDGE_CURVE('',#40483,#40627,#45352,.T.); +#45352 = LINE('',#45353,#45354); +#45353 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#45354 = VECTOR('',#45355,1.); +#45355 = DIRECTION('',(-0.,-1.,-0.)); +#45356 = ORIENTED_EDGE('',*,*,#45357,.F.); +#45357 = EDGE_CURVE('',#37722,#40627,#45358,.T.); +#45358 = LINE('',#45359,#45360); +#45359 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#45360 = VECTOR('',#45361,1.); +#45361 = DIRECTION('',(0.,0.,-1.)); +#45362 = ORIENTED_EDGE('',*,*,#37729,.F.); +#45363 = PLANE('',#45364); +#45364 = AXIS2_PLACEMENT_3D('',#45365,#45366,#45367); +#45365 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#45366 = DIRECTION('',(1.,0.,0.)); +#45367 = DIRECTION('',(-0.,1.,0.)); +#45368 = ADVANCED_FACE('',(#45369),#45375,.T.); +#45369 = FACE_BOUND('',#45370,.F.); +#45370 = EDGE_LOOP('',(#45371,#45372,#45373,#45374)); +#45371 = ORIENTED_EDGE('',*,*,#45357,.T.); +#45372 = ORIENTED_EDGE('',*,*,#40674,.T.); +#45373 = ORIENTED_EDGE('',*,*,#40731,.F.); +#45374 = ORIENTED_EDGE('',*,*,#37721,.F.); +#45375 = PLANE('',#45376); +#45376 = AXIS2_PLACEMENT_3D('',#45377,#45378,#45379); +#45377 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#45378 = DIRECTION('',(0.,1.,0.)); +#45379 = DIRECTION('',(-1.,0.,0.)); +#45380 = ADVANCED_FACE('',(#45381),#45392,.T.); +#45381 = FACE_BOUND('',#45382,.F.); +#45382 = EDGE_LOOP('',(#45383,#45384,#45385,#45391)); +#45383 = ORIENTED_EDGE('',*,*,#40738,.T.); +#45384 = ORIENTED_EDGE('',*,*,#40784,.T.); +#45385 = ORIENTED_EDGE('',*,*,#45386,.F.); +#45386 = EDGE_CURVE('',#37698,#40785,#45387,.T.); +#45387 = LINE('',#45388,#45389); +#45388 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#45389 = VECTOR('',#45390,1.); +#45390 = DIRECTION('',(0.,0.,-1.)); +#45391 = ORIENTED_EDGE('',*,*,#37705,.F.); +#45392 = PLANE('',#45393); +#45393 = AXIS2_PLACEMENT_3D('',#45394,#45395,#45396); +#45394 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#45395 = DIRECTION('',(-0.,-1.,-0.)); +#45396 = DIRECTION('',(1.,-0.,0.)); +#45397 = ADVANCED_FACE('',(#45398),#45414,.T.); +#45398 = FACE_BOUND('',#45399,.F.); +#45399 = EDGE_LOOP('',(#45400,#45401,#45407,#45413)); +#45400 = ORIENTED_EDGE('',*,*,#45386,.T.); +#45401 = ORIENTED_EDGE('',*,*,#45402,.T.); +#45402 = EDGE_CURVE('',#40785,#40929,#45403,.T.); +#45403 = LINE('',#45404,#45405); +#45404 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#45405 = VECTOR('',#45406,1.); +#45406 = DIRECTION('',(-0.,-1.,-0.)); +#45407 = ORIENTED_EDGE('',*,*,#45408,.F.); +#45408 = EDGE_CURVE('',#37690,#40929,#45409,.T.); +#45409 = LINE('',#45410,#45411); +#45410 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#45411 = VECTOR('',#45412,1.); +#45412 = DIRECTION('',(0.,0.,-1.)); +#45413 = ORIENTED_EDGE('',*,*,#37697,.F.); +#45414 = PLANE('',#45415); +#45415 = AXIS2_PLACEMENT_3D('',#45416,#45417,#45418); +#45416 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#45417 = DIRECTION('',(1.,0.,0.)); +#45418 = DIRECTION('',(-0.,1.,0.)); +#45419 = ADVANCED_FACE('',(#45420),#45426,.T.); +#45420 = FACE_BOUND('',#45421,.F.); +#45421 = EDGE_LOOP('',(#45422,#45423,#45424,#45425)); +#45422 = ORIENTED_EDGE('',*,*,#45408,.T.); +#45423 = ORIENTED_EDGE('',*,*,#40976,.T.); +#45424 = ORIENTED_EDGE('',*,*,#41033,.F.); +#45425 = ORIENTED_EDGE('',*,*,#37689,.F.); +#45426 = PLANE('',#45427); +#45427 = AXIS2_PLACEMENT_3D('',#45428,#45429,#45430); +#45428 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#45429 = DIRECTION('',(0.,1.,0.)); +#45430 = DIRECTION('',(-1.,0.,0.)); +#45431 = ADVANCED_FACE('',(#45432),#45443,.T.); +#45432 = FACE_BOUND('',#45433,.F.); +#45433 = EDGE_LOOP('',(#45434,#45435,#45436,#45442)); +#45434 = ORIENTED_EDGE('',*,*,#41040,.T.); +#45435 = ORIENTED_EDGE('',*,*,#41086,.T.); +#45436 = ORIENTED_EDGE('',*,*,#45437,.F.); +#45437 = EDGE_CURVE('',#37666,#41087,#45438,.T.); +#45438 = LINE('',#45439,#45440); +#45439 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#45440 = VECTOR('',#45441,1.); +#45441 = DIRECTION('',(0.,0.,-1.)); +#45442 = ORIENTED_EDGE('',*,*,#37673,.F.); +#45443 = PLANE('',#45444); +#45444 = AXIS2_PLACEMENT_3D('',#45445,#45446,#45447); +#45445 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#45446 = DIRECTION('',(-0.,-1.,-0.)); +#45447 = DIRECTION('',(1.,-0.,0.)); +#45448 = ADVANCED_FACE('',(#45449),#45465,.T.); +#45449 = FACE_BOUND('',#45450,.F.); +#45450 = EDGE_LOOP('',(#45451,#45452,#45458,#45464)); +#45451 = ORIENTED_EDGE('',*,*,#45437,.T.); +#45452 = ORIENTED_EDGE('',*,*,#45453,.T.); +#45453 = EDGE_CURVE('',#41087,#41231,#45454,.T.); +#45454 = LINE('',#45455,#45456); +#45455 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#45456 = VECTOR('',#45457,1.); +#45457 = DIRECTION('',(-0.,-1.,-0.)); +#45458 = ORIENTED_EDGE('',*,*,#45459,.F.); +#45459 = EDGE_CURVE('',#37658,#41231,#45460,.T.); +#45460 = LINE('',#45461,#45462); +#45461 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#45462 = VECTOR('',#45463,1.); +#45463 = DIRECTION('',(0.,0.,-1.)); +#45464 = ORIENTED_EDGE('',*,*,#37665,.F.); +#45465 = PLANE('',#45466); +#45466 = AXIS2_PLACEMENT_3D('',#45467,#45468,#45469); +#45467 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#45468 = DIRECTION('',(1.,0.,0.)); +#45469 = DIRECTION('',(-0.,1.,0.)); +#45470 = ADVANCED_FACE('',(#45471),#45477,.T.); +#45471 = FACE_BOUND('',#45472,.F.); +#45472 = EDGE_LOOP('',(#45473,#45474,#45475,#45476)); +#45473 = ORIENTED_EDGE('',*,*,#45459,.T.); +#45474 = ORIENTED_EDGE('',*,*,#41278,.T.); +#45475 = ORIENTED_EDGE('',*,*,#41335,.F.); +#45476 = ORIENTED_EDGE('',*,*,#37657,.F.); +#45477 = PLANE('',#45478); +#45478 = AXIS2_PLACEMENT_3D('',#45479,#45480,#45481); +#45479 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#45480 = DIRECTION('',(0.,1.,0.)); +#45481 = DIRECTION('',(-1.,0.,0.)); +#45482 = ADVANCED_FACE('',(#45483),#45494,.T.); +#45483 = FACE_BOUND('',#45484,.F.); +#45484 = EDGE_LOOP('',(#45485,#45486,#45487,#45493)); +#45485 = ORIENTED_EDGE('',*,*,#41342,.T.); +#45486 = ORIENTED_EDGE('',*,*,#41388,.T.); +#45487 = ORIENTED_EDGE('',*,*,#45488,.F.); +#45488 = EDGE_CURVE('',#37634,#41389,#45489,.T.); +#45489 = LINE('',#45490,#45491); +#45490 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#45491 = VECTOR('',#45492,1.); +#45492 = DIRECTION('',(0.,0.,-1.)); +#45493 = ORIENTED_EDGE('',*,*,#37641,.F.); +#45494 = PLANE('',#45495); +#45495 = AXIS2_PLACEMENT_3D('',#45496,#45497,#45498); +#45496 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#45497 = DIRECTION('',(-0.,-1.,-0.)); +#45498 = DIRECTION('',(1.,-0.,0.)); +#45499 = ADVANCED_FACE('',(#45500),#45516,.T.); +#45500 = FACE_BOUND('',#45501,.F.); +#45501 = EDGE_LOOP('',(#45502,#45503,#45509,#45515)); +#45502 = ORIENTED_EDGE('',*,*,#45488,.T.); +#45503 = ORIENTED_EDGE('',*,*,#45504,.T.); +#45504 = EDGE_CURVE('',#41389,#41533,#45505,.T.); +#45505 = LINE('',#45506,#45507); +#45506 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#45507 = VECTOR('',#45508,1.); +#45508 = DIRECTION('',(-0.,-1.,-0.)); +#45509 = ORIENTED_EDGE('',*,*,#45510,.F.); +#45510 = EDGE_CURVE('',#37626,#41533,#45511,.T.); +#45511 = LINE('',#45512,#45513); +#45512 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#45513 = VECTOR('',#45514,1.); +#45514 = DIRECTION('',(0.,0.,-1.)); +#45515 = ORIENTED_EDGE('',*,*,#37633,.F.); +#45516 = PLANE('',#45517); +#45517 = AXIS2_PLACEMENT_3D('',#45518,#45519,#45520); +#45518 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#45519 = DIRECTION('',(1.,0.,0.)); +#45520 = DIRECTION('',(-0.,1.,0.)); +#45521 = ADVANCED_FACE('',(#45522),#45528,.T.); +#45522 = FACE_BOUND('',#45523,.F.); +#45523 = EDGE_LOOP('',(#45524,#45525,#45526,#45527)); +#45524 = ORIENTED_EDGE('',*,*,#45510,.T.); +#45525 = ORIENTED_EDGE('',*,*,#41580,.T.); +#45526 = ORIENTED_EDGE('',*,*,#41637,.F.); +#45527 = ORIENTED_EDGE('',*,*,#37625,.F.); +#45528 = PLANE('',#45529); +#45529 = AXIS2_PLACEMENT_3D('',#45530,#45531,#45532); +#45530 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#45531 = DIRECTION('',(0.,1.,0.)); +#45532 = DIRECTION('',(-1.,0.,0.)); +#45533 = ADVANCED_FACE('',(#45534),#45545,.T.); +#45534 = FACE_BOUND('',#45535,.F.); +#45535 = EDGE_LOOP('',(#45536,#45537,#45538,#45544)); +#45536 = ORIENTED_EDGE('',*,*,#41644,.T.); +#45537 = ORIENTED_EDGE('',*,*,#41690,.T.); +#45538 = ORIENTED_EDGE('',*,*,#45539,.F.); +#45539 = EDGE_CURVE('',#37602,#41691,#45540,.T.); +#45540 = LINE('',#45541,#45542); +#45541 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#45542 = VECTOR('',#45543,1.); +#45543 = DIRECTION('',(0.,0.,-1.)); +#45544 = ORIENTED_EDGE('',*,*,#37609,.F.); +#45545 = PLANE('',#45546); +#45546 = AXIS2_PLACEMENT_3D('',#45547,#45548,#45549); +#45547 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#45548 = DIRECTION('',(-0.,-1.,-0.)); +#45549 = DIRECTION('',(1.,-0.,0.)); +#45550 = ADVANCED_FACE('',(#45551),#45567,.T.); +#45551 = FACE_BOUND('',#45552,.F.); +#45552 = EDGE_LOOP('',(#45553,#45554,#45560,#45566)); +#45553 = ORIENTED_EDGE('',*,*,#45539,.T.); +#45554 = ORIENTED_EDGE('',*,*,#45555,.T.); +#45555 = EDGE_CURVE('',#41691,#41835,#45556,.T.); +#45556 = LINE('',#45557,#45558); +#45557 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#45558 = VECTOR('',#45559,1.); +#45559 = DIRECTION('',(-0.,-1.,-0.)); +#45560 = ORIENTED_EDGE('',*,*,#45561,.F.); +#45561 = EDGE_CURVE('',#37594,#41835,#45562,.T.); +#45562 = LINE('',#45563,#45564); +#45563 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#45564 = VECTOR('',#45565,1.); +#45565 = DIRECTION('',(0.,0.,-1.)); +#45566 = ORIENTED_EDGE('',*,*,#37601,.F.); +#45567 = PLANE('',#45568); +#45568 = AXIS2_PLACEMENT_3D('',#45569,#45570,#45571); +#45569 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#45570 = DIRECTION('',(1.,0.,0.)); +#45571 = DIRECTION('',(-0.,1.,0.)); +#45572 = ADVANCED_FACE('',(#45573),#45579,.T.); +#45573 = FACE_BOUND('',#45574,.F.); +#45574 = EDGE_LOOP('',(#45575,#45576,#45577,#45578)); +#45575 = ORIENTED_EDGE('',*,*,#45561,.T.); +#45576 = ORIENTED_EDGE('',*,*,#41882,.T.); +#45577 = ORIENTED_EDGE('',*,*,#41939,.F.); +#45578 = ORIENTED_EDGE('',*,*,#37593,.F.); +#45579 = PLANE('',#45580); +#45580 = AXIS2_PLACEMENT_3D('',#45581,#45582,#45583); +#45581 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#45582 = DIRECTION('',(0.,1.,0.)); +#45583 = DIRECTION('',(-1.,0.,0.)); +#45584 = ADVANCED_FACE('',(#45585),#45596,.T.); +#45585 = FACE_BOUND('',#45586,.F.); +#45586 = EDGE_LOOP('',(#45587,#45588,#45589,#45595)); +#45587 = ORIENTED_EDGE('',*,*,#41946,.T.); +#45588 = ORIENTED_EDGE('',*,*,#41992,.T.); +#45589 = ORIENTED_EDGE('',*,*,#45590,.F.); +#45590 = EDGE_CURVE('',#37570,#41993,#45591,.T.); +#45591 = LINE('',#45592,#45593); +#45592 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#45593 = VECTOR('',#45594,1.); +#45594 = DIRECTION('',(0.,0.,-1.)); +#45595 = ORIENTED_EDGE('',*,*,#37577,.F.); +#45596 = PLANE('',#45597); +#45597 = AXIS2_PLACEMENT_3D('',#45598,#45599,#45600); +#45598 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#45599 = DIRECTION('',(-0.,-1.,-0.)); +#45600 = DIRECTION('',(1.,-0.,0.)); +#45601 = ADVANCED_FACE('',(#45602),#45618,.T.); +#45602 = FACE_BOUND('',#45603,.F.); +#45603 = EDGE_LOOP('',(#45604,#45605,#45611,#45617)); +#45604 = ORIENTED_EDGE('',*,*,#45590,.T.); +#45605 = ORIENTED_EDGE('',*,*,#45606,.T.); +#45606 = EDGE_CURVE('',#41993,#42137,#45607,.T.); +#45607 = LINE('',#45608,#45609); +#45608 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#45609 = VECTOR('',#45610,1.); +#45610 = DIRECTION('',(-0.,-1.,-0.)); +#45611 = ORIENTED_EDGE('',*,*,#45612,.F.); +#45612 = EDGE_CURVE('',#37562,#42137,#45613,.T.); +#45613 = LINE('',#45614,#45615); +#45614 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#45615 = VECTOR('',#45616,1.); +#45616 = DIRECTION('',(0.,0.,-1.)); +#45617 = ORIENTED_EDGE('',*,*,#37569,.F.); +#45618 = PLANE('',#45619); +#45619 = AXIS2_PLACEMENT_3D('',#45620,#45621,#45622); +#45620 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#45621 = DIRECTION('',(1.,0.,0.)); +#45622 = DIRECTION('',(-0.,1.,0.)); +#45623 = ADVANCED_FACE('',(#45624),#45630,.T.); +#45624 = FACE_BOUND('',#45625,.F.); +#45625 = EDGE_LOOP('',(#45626,#45627,#45628,#45629)); +#45626 = ORIENTED_EDGE('',*,*,#45612,.T.); +#45627 = ORIENTED_EDGE('',*,*,#42184,.T.); +#45628 = ORIENTED_EDGE('',*,*,#42233,.F.); +#45629 = ORIENTED_EDGE('',*,*,#37561,.F.); +#45630 = PLANE('',#45631); +#45631 = AXIS2_PLACEMENT_3D('',#45632,#45633,#45634); +#45632 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#45633 = DIRECTION('',(0.,1.,0.)); +#45634 = DIRECTION('',(-1.,0.,0.)); +#45635 = ADVANCED_FACE('',(#45636),#45647,.T.); +#45636 = FACE_BOUND('',#45637,.F.); +#45637 = EDGE_LOOP('',(#45638,#45639,#45640,#45646)); +#45638 = ORIENTED_EDGE('',*,*,#42282,.T.); +#45639 = ORIENTED_EDGE('',*,*,#42328,.T.); +#45640 = ORIENTED_EDGE('',*,*,#45641,.F.); +#45641 = EDGE_CURVE('',#37530,#42329,#45642,.T.); +#45642 = LINE('',#45643,#45644); +#45643 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#45644 = VECTOR('',#45645,1.); +#45645 = DIRECTION('',(0.,0.,-1.)); +#45646 = ORIENTED_EDGE('',*,*,#37537,.F.); +#45647 = PLANE('',#45648); +#45648 = AXIS2_PLACEMENT_3D('',#45649,#45650,#45651); +#45649 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#45650 = DIRECTION('',(-1.,-0.,-0.)); +#45651 = DIRECTION('',(0.,-1.,0.)); +#45652 = ADVANCED_FACE('',(#45653),#45669,.T.); +#45653 = FACE_BOUND('',#45654,.F.); +#45654 = EDGE_LOOP('',(#45655,#45656,#45662,#45668)); +#45655 = ORIENTED_EDGE('',*,*,#45641,.T.); +#45656 = ORIENTED_EDGE('',*,*,#45657,.T.); +#45657 = EDGE_CURVE('',#42329,#42473,#45658,.T.); +#45658 = LINE('',#45659,#45660); +#45659 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#45660 = VECTOR('',#45661,1.); +#45661 = DIRECTION('',(-1.,-0.,-0.)); +#45662 = ORIENTED_EDGE('',*,*,#45663,.F.); +#45663 = EDGE_CURVE('',#37522,#42473,#45664,.T.); +#45664 = LINE('',#45665,#45666); +#45665 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#45666 = VECTOR('',#45667,1.); +#45667 = DIRECTION('',(0.,0.,-1.)); +#45668 = ORIENTED_EDGE('',*,*,#37529,.F.); +#45669 = PLANE('',#45670); +#45670 = AXIS2_PLACEMENT_3D('',#45671,#45672,#45673); +#45671 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#45672 = DIRECTION('',(-0.,-1.,-0.)); +#45673 = DIRECTION('',(1.,-0.,0.)); +#45674 = ADVANCED_FACE('',(#45675),#45681,.T.); +#45675 = FACE_BOUND('',#45676,.F.); +#45676 = EDGE_LOOP('',(#45677,#45678,#45679,#45680)); +#45677 = ORIENTED_EDGE('',*,*,#45663,.T.); +#45678 = ORIENTED_EDGE('',*,*,#42520,.T.); +#45679 = ORIENTED_EDGE('',*,*,#42577,.F.); +#45680 = ORIENTED_EDGE('',*,*,#37521,.F.); +#45681 = PLANE('',#45682); +#45682 = AXIS2_PLACEMENT_3D('',#45683,#45684,#45685); +#45683 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#45684 = DIRECTION('',(1.,0.,0.)); +#45685 = DIRECTION('',(-0.,1.,0.)); +#45686 = ADVANCED_FACE('',(#45687),#45698,.T.); +#45687 = FACE_BOUND('',#45688,.F.); +#45688 = EDGE_LOOP('',(#45689,#45690,#45691,#45697)); +#45689 = ORIENTED_EDGE('',*,*,#42584,.T.); +#45690 = ORIENTED_EDGE('',*,*,#42630,.T.); +#45691 = ORIENTED_EDGE('',*,*,#45692,.F.); +#45692 = EDGE_CURVE('',#37498,#42631,#45693,.T.); +#45693 = LINE('',#45694,#45695); +#45694 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#45695 = VECTOR('',#45696,1.); +#45696 = DIRECTION('',(0.,0.,-1.)); +#45697 = ORIENTED_EDGE('',*,*,#37505,.F.); +#45698 = PLANE('',#45699); +#45699 = AXIS2_PLACEMENT_3D('',#45700,#45701,#45702); +#45700 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#45701 = DIRECTION('',(-1.,-0.,-0.)); +#45702 = DIRECTION('',(0.,-1.,0.)); +#45703 = ADVANCED_FACE('',(#45704),#45720,.T.); +#45704 = FACE_BOUND('',#45705,.F.); +#45705 = EDGE_LOOP('',(#45706,#45707,#45713,#45719)); +#45706 = ORIENTED_EDGE('',*,*,#45692,.T.); +#45707 = ORIENTED_EDGE('',*,*,#45708,.T.); +#45708 = EDGE_CURVE('',#42631,#42775,#45709,.T.); +#45709 = LINE('',#45710,#45711); +#45710 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#45711 = VECTOR('',#45712,1.); +#45712 = DIRECTION('',(-1.,-0.,-0.)); +#45713 = ORIENTED_EDGE('',*,*,#45714,.F.); +#45714 = EDGE_CURVE('',#37490,#42775,#45715,.T.); +#45715 = LINE('',#45716,#45717); +#45716 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#45717 = VECTOR('',#45718,1.); +#45718 = DIRECTION('',(0.,0.,-1.)); +#45719 = ORIENTED_EDGE('',*,*,#37497,.F.); +#45720 = PLANE('',#45721); +#45721 = AXIS2_PLACEMENT_3D('',#45722,#45723,#45724); +#45722 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#45723 = DIRECTION('',(-0.,-1.,-0.)); +#45724 = DIRECTION('',(1.,-0.,0.)); +#45725 = ADVANCED_FACE('',(#45726),#45732,.T.); +#45726 = FACE_BOUND('',#45727,.F.); +#45727 = EDGE_LOOP('',(#45728,#45729,#45730,#45731)); +#45728 = ORIENTED_EDGE('',*,*,#45714,.T.); +#45729 = ORIENTED_EDGE('',*,*,#42822,.T.); +#45730 = ORIENTED_EDGE('',*,*,#42879,.F.); +#45731 = ORIENTED_EDGE('',*,*,#37489,.F.); +#45732 = PLANE('',#45733); +#45733 = AXIS2_PLACEMENT_3D('',#45734,#45735,#45736); +#45734 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#45735 = DIRECTION('',(1.,0.,0.)); +#45736 = DIRECTION('',(-0.,1.,0.)); +#45737 = ADVANCED_FACE('',(#45738),#45749,.T.); +#45738 = FACE_BOUND('',#45739,.F.); +#45739 = EDGE_LOOP('',(#45740,#45741,#45742,#45748)); +#45740 = ORIENTED_EDGE('',*,*,#42886,.T.); +#45741 = ORIENTED_EDGE('',*,*,#42932,.T.); +#45742 = ORIENTED_EDGE('',*,*,#45743,.F.); +#45743 = EDGE_CURVE('',#37466,#42933,#45744,.T.); +#45744 = LINE('',#45745,#45746); +#45745 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#45746 = VECTOR('',#45747,1.); +#45747 = DIRECTION('',(0.,0.,-1.)); +#45748 = ORIENTED_EDGE('',*,*,#37473,.F.); +#45749 = PLANE('',#45750); +#45750 = AXIS2_PLACEMENT_3D('',#45751,#45752,#45753); +#45751 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#45752 = DIRECTION('',(-1.,-0.,-0.)); +#45753 = DIRECTION('',(0.,-1.,0.)); +#45754 = ADVANCED_FACE('',(#45755),#45771,.T.); +#45755 = FACE_BOUND('',#45756,.F.); +#45756 = EDGE_LOOP('',(#45757,#45758,#45764,#45770)); +#45757 = ORIENTED_EDGE('',*,*,#45743,.T.); +#45758 = ORIENTED_EDGE('',*,*,#45759,.T.); +#45759 = EDGE_CURVE('',#42933,#43077,#45760,.T.); +#45760 = LINE('',#45761,#45762); +#45761 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#45762 = VECTOR('',#45763,1.); +#45763 = DIRECTION('',(-1.,-0.,-0.)); +#45764 = ORIENTED_EDGE('',*,*,#45765,.F.); +#45765 = EDGE_CURVE('',#37458,#43077,#45766,.T.); +#45766 = LINE('',#45767,#45768); +#45767 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#45768 = VECTOR('',#45769,1.); +#45769 = DIRECTION('',(0.,0.,-1.)); +#45770 = ORIENTED_EDGE('',*,*,#37465,.F.); +#45771 = PLANE('',#45772); +#45772 = AXIS2_PLACEMENT_3D('',#45773,#45774,#45775); +#45773 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#45774 = DIRECTION('',(-0.,-1.,-0.)); +#45775 = DIRECTION('',(1.,-0.,0.)); +#45776 = ADVANCED_FACE('',(#45777),#45783,.T.); +#45777 = FACE_BOUND('',#45778,.F.); +#45778 = EDGE_LOOP('',(#45779,#45780,#45781,#45782)); +#45779 = ORIENTED_EDGE('',*,*,#45765,.T.); +#45780 = ORIENTED_EDGE('',*,*,#43124,.T.); +#45781 = ORIENTED_EDGE('',*,*,#43181,.F.); +#45782 = ORIENTED_EDGE('',*,*,#37457,.F.); +#45783 = PLANE('',#45784); +#45784 = AXIS2_PLACEMENT_3D('',#45785,#45786,#45787); +#45785 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#45786 = DIRECTION('',(1.,0.,0.)); +#45787 = DIRECTION('',(-0.,1.,0.)); +#45788 = ADVANCED_FACE('',(#45789),#45800,.T.); +#45789 = FACE_BOUND('',#45790,.F.); +#45790 = EDGE_LOOP('',(#45791,#45792,#45793,#45799)); +#45791 = ORIENTED_EDGE('',*,*,#43188,.T.); +#45792 = ORIENTED_EDGE('',*,*,#43234,.T.); +#45793 = ORIENTED_EDGE('',*,*,#45794,.F.); +#45794 = EDGE_CURVE('',#37434,#43235,#45795,.T.); +#45795 = LINE('',#45796,#45797); +#45796 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#45797 = VECTOR('',#45798,1.); +#45798 = DIRECTION('',(0.,0.,-1.)); +#45799 = ORIENTED_EDGE('',*,*,#37441,.F.); +#45800 = PLANE('',#45801); +#45801 = AXIS2_PLACEMENT_3D('',#45802,#45803,#45804); +#45802 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#45803 = DIRECTION('',(-1.,-0.,-0.)); +#45804 = DIRECTION('',(0.,-1.,0.)); +#45805 = ADVANCED_FACE('',(#45806),#45822,.T.); +#45806 = FACE_BOUND('',#45807,.F.); +#45807 = EDGE_LOOP('',(#45808,#45809,#45815,#45821)); +#45808 = ORIENTED_EDGE('',*,*,#45794,.T.); +#45809 = ORIENTED_EDGE('',*,*,#45810,.T.); +#45810 = EDGE_CURVE('',#43235,#43379,#45811,.T.); +#45811 = LINE('',#45812,#45813); +#45812 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#45813 = VECTOR('',#45814,1.); +#45814 = DIRECTION('',(-1.,-0.,-0.)); +#45815 = ORIENTED_EDGE('',*,*,#45816,.F.); +#45816 = EDGE_CURVE('',#37426,#43379,#45817,.T.); +#45817 = LINE('',#45818,#45819); +#45818 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#45819 = VECTOR('',#45820,1.); +#45820 = DIRECTION('',(0.,0.,-1.)); +#45821 = ORIENTED_EDGE('',*,*,#37433,.F.); +#45822 = PLANE('',#45823); +#45823 = AXIS2_PLACEMENT_3D('',#45824,#45825,#45826); +#45824 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#45825 = DIRECTION('',(-0.,-1.,-0.)); +#45826 = DIRECTION('',(1.,-0.,0.)); +#45827 = ADVANCED_FACE('',(#45828),#45834,.T.); +#45828 = FACE_BOUND('',#45829,.F.); +#45829 = EDGE_LOOP('',(#45830,#45831,#45832,#45833)); +#45830 = ORIENTED_EDGE('',*,*,#45816,.T.); +#45831 = ORIENTED_EDGE('',*,*,#43426,.T.); +#45832 = ORIENTED_EDGE('',*,*,#43483,.F.); +#45833 = ORIENTED_EDGE('',*,*,#37425,.F.); +#45834 = PLANE('',#45835); +#45835 = AXIS2_PLACEMENT_3D('',#45836,#45837,#45838); +#45836 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#45837 = DIRECTION('',(1.,0.,0.)); +#45838 = DIRECTION('',(-0.,1.,0.)); +#45839 = ADVANCED_FACE('',(#45840),#45851,.T.); +#45840 = FACE_BOUND('',#45841,.F.); +#45841 = EDGE_LOOP('',(#45842,#45843,#45844,#45850)); +#45842 = ORIENTED_EDGE('',*,*,#43490,.T.); +#45843 = ORIENTED_EDGE('',*,*,#43536,.T.); +#45844 = ORIENTED_EDGE('',*,*,#45845,.F.); +#45845 = EDGE_CURVE('',#37402,#43537,#45846,.T.); +#45846 = LINE('',#45847,#45848); +#45847 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#45848 = VECTOR('',#45849,1.); +#45849 = DIRECTION('',(0.,0.,-1.)); +#45850 = ORIENTED_EDGE('',*,*,#37409,.F.); +#45851 = PLANE('',#45852); +#45852 = AXIS2_PLACEMENT_3D('',#45853,#45854,#45855); +#45853 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#45854 = DIRECTION('',(-1.,-0.,-0.)); +#45855 = DIRECTION('',(0.,-1.,0.)); +#45856 = ADVANCED_FACE('',(#45857),#45873,.T.); +#45857 = FACE_BOUND('',#45858,.F.); +#45858 = EDGE_LOOP('',(#45859,#45860,#45866,#45872)); +#45859 = ORIENTED_EDGE('',*,*,#45845,.T.); +#45860 = ORIENTED_EDGE('',*,*,#45861,.T.); +#45861 = EDGE_CURVE('',#43537,#43681,#45862,.T.); +#45862 = LINE('',#45863,#45864); +#45863 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#45864 = VECTOR('',#45865,1.); +#45865 = DIRECTION('',(-1.,-0.,-0.)); +#45866 = ORIENTED_EDGE('',*,*,#45867,.F.); +#45867 = EDGE_CURVE('',#37394,#43681,#45868,.T.); +#45868 = LINE('',#45869,#45870); +#45869 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#45870 = VECTOR('',#45871,1.); +#45871 = DIRECTION('',(0.,0.,-1.)); +#45872 = ORIENTED_EDGE('',*,*,#37401,.F.); +#45873 = PLANE('',#45874); +#45874 = AXIS2_PLACEMENT_3D('',#45875,#45876,#45877); +#45875 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#45876 = DIRECTION('',(-0.,-1.,-0.)); +#45877 = DIRECTION('',(1.,-0.,0.)); +#45878 = ADVANCED_FACE('',(#45879),#45885,.T.); +#45879 = FACE_BOUND('',#45880,.F.); +#45880 = EDGE_LOOP('',(#45881,#45882,#45883,#45884)); +#45881 = ORIENTED_EDGE('',*,*,#45867,.T.); +#45882 = ORIENTED_EDGE('',*,*,#43728,.T.); +#45883 = ORIENTED_EDGE('',*,*,#43785,.F.); +#45884 = ORIENTED_EDGE('',*,*,#37393,.F.); +#45885 = PLANE('',#45886); +#45886 = AXIS2_PLACEMENT_3D('',#45887,#45888,#45889); +#45887 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#45888 = DIRECTION('',(1.,0.,0.)); +#45889 = DIRECTION('',(-0.,1.,0.)); +#45890 = ADVANCED_FACE('',(#45891),#45902,.T.); +#45891 = FACE_BOUND('',#45892,.F.); +#45892 = EDGE_LOOP('',(#45893,#45894,#45895,#45901)); +#45893 = ORIENTED_EDGE('',*,*,#43792,.T.); +#45894 = ORIENTED_EDGE('',*,*,#43838,.T.); +#45895 = ORIENTED_EDGE('',*,*,#45896,.F.); +#45896 = EDGE_CURVE('',#37370,#43839,#45897,.T.); +#45897 = LINE('',#45898,#45899); +#45898 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#45899 = VECTOR('',#45900,1.); +#45900 = DIRECTION('',(0.,0.,-1.)); +#45901 = ORIENTED_EDGE('',*,*,#37377,.F.); +#45902 = PLANE('',#45903); +#45903 = AXIS2_PLACEMENT_3D('',#45904,#45905,#45906); +#45904 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#45905 = DIRECTION('',(-1.,-0.,-0.)); +#45906 = DIRECTION('',(0.,-1.,0.)); +#45907 = ADVANCED_FACE('',(#45908),#45924,.T.); +#45908 = FACE_BOUND('',#45909,.F.); +#45909 = EDGE_LOOP('',(#45910,#45911,#45917,#45923)); +#45910 = ORIENTED_EDGE('',*,*,#45896,.T.); +#45911 = ORIENTED_EDGE('',*,*,#45912,.T.); +#45912 = EDGE_CURVE('',#43839,#43983,#45913,.T.); +#45913 = LINE('',#45914,#45915); +#45914 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#45915 = VECTOR('',#45916,1.); +#45916 = DIRECTION('',(-1.,-0.,-0.)); +#45917 = ORIENTED_EDGE('',*,*,#45918,.F.); +#45918 = EDGE_CURVE('',#37362,#43983,#45919,.T.); +#45919 = LINE('',#45920,#45921); +#45920 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#45921 = VECTOR('',#45922,1.); +#45922 = DIRECTION('',(0.,0.,-1.)); +#45923 = ORIENTED_EDGE('',*,*,#37369,.F.); +#45924 = PLANE('',#45925); +#45925 = AXIS2_PLACEMENT_3D('',#45926,#45927,#45928); +#45926 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#45927 = DIRECTION('',(-0.,-1.,-0.)); +#45928 = DIRECTION('',(1.,-0.,0.)); +#45929 = ADVANCED_FACE('',(#45930),#45936,.T.); +#45930 = FACE_BOUND('',#45931,.F.); +#45931 = EDGE_LOOP('',(#45932,#45933,#45934,#45935)); +#45932 = ORIENTED_EDGE('',*,*,#45918,.T.); +#45933 = ORIENTED_EDGE('',*,*,#44030,.T.); +#45934 = ORIENTED_EDGE('',*,*,#44056,.F.); +#45935 = ORIENTED_EDGE('',*,*,#37361,.F.); +#45936 = PLANE('',#45937); +#45937 = AXIS2_PLACEMENT_3D('',#45938,#45939,#45940); +#45938 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#45939 = DIRECTION('',(1.,0.,0.)); +#45940 = DIRECTION('',(-0.,1.,0.)); +#45941 = ADVANCED_FACE('',(#45942),#45953,.T.); +#45942 = FACE_BOUND('',#45943,.T.); +#45943 = EDGE_LOOP('',(#45944,#45950,#45951,#45952)); +#45944 = ORIENTED_EDGE('',*,*,#45945,.T.); +#45945 = EDGE_CURVE('',#37338,#43959,#45946,.T.); +#45946 = LINE('',#45947,#45948); +#45947 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#45948 = VECTOR('',#45949,1.); +#45949 = DIRECTION('',(-0.,-0.,-1.)); +#45950 = ORIENTED_EDGE('',*,*,#44006,.T.); +#45951 = ORIENTED_EDGE('',*,*,#44063,.F.); +#45952 = ORIENTED_EDGE('',*,*,#37345,.F.); +#45953 = PLANE('',#45954); +#45954 = AXIS2_PLACEMENT_3D('',#45955,#45956,#45957); +#45955 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#45956 = DIRECTION('',(-1.,0.,0.)); +#45957 = DIRECTION('',(0.,-1.,0.)); +#45958 = ADVANCED_FACE('',(#45959),#45975,.T.); +#45959 = FACE_BOUND('',#45960,.T.); +#45960 = EDGE_LOOP('',(#45961,#45967,#45973,#45974)); +#45961 = ORIENTED_EDGE('',*,*,#45962,.T.); +#45962 = EDGE_CURVE('',#37330,#43815,#45963,.T.); +#45963 = LINE('',#45964,#45965); +#45964 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#45965 = VECTOR('',#45966,1.); +#45966 = DIRECTION('',(-0.,-0.,-1.)); +#45967 = ORIENTED_EDGE('',*,*,#45968,.T.); +#45968 = EDGE_CURVE('',#43815,#43959,#45969,.T.); +#45969 = LINE('',#45970,#45971); +#45970 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#45971 = VECTOR('',#45972,1.); +#45972 = DIRECTION('',(1.,0.,0.)); +#45973 = ORIENTED_EDGE('',*,*,#45945,.F.); +#45974 = ORIENTED_EDGE('',*,*,#37337,.F.); +#45975 = PLANE('',#45976); +#45976 = AXIS2_PLACEMENT_3D('',#45977,#45978,#45979); +#45977 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#45978 = DIRECTION('',(0.,-1.,0.)); +#45979 = DIRECTION('',(1.,0.,0.)); +#45980 = ADVANCED_FACE('',(#45981),#45987,.T.); +#45981 = FACE_BOUND('',#45982,.T.); +#45982 = EDGE_LOOP('',(#45983,#45984,#45985,#45986)); +#45983 = ORIENTED_EDGE('',*,*,#43761,.T.); +#45984 = ORIENTED_EDGE('',*,*,#43814,.T.); +#45985 = ORIENTED_EDGE('',*,*,#45962,.F.); +#45986 = ORIENTED_EDGE('',*,*,#37329,.F.); +#45987 = PLANE('',#45988); +#45988 = AXIS2_PLACEMENT_3D('',#45989,#45990,#45991); +#45989 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#45990 = DIRECTION('',(1.,0.,0.)); +#45991 = DIRECTION('',(-0.,1.,0.)); +#45992 = ADVANCED_FACE('',(#45993),#46004,.T.); +#45993 = FACE_BOUND('',#45994,.T.); +#45994 = EDGE_LOOP('',(#45995,#46001,#46002,#46003)); +#45995 = ORIENTED_EDGE('',*,*,#45996,.T.); +#45996 = EDGE_CURVE('',#37306,#43657,#45997,.T.); +#45997 = LINE('',#45998,#45999); +#45998 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#45999 = VECTOR('',#46000,1.); +#46000 = DIRECTION('',(-0.,-0.,-1.)); +#46001 = ORIENTED_EDGE('',*,*,#43704,.T.); +#46002 = ORIENTED_EDGE('',*,*,#43768,.F.); +#46003 = ORIENTED_EDGE('',*,*,#37313,.F.); +#46004 = PLANE('',#46005); +#46005 = AXIS2_PLACEMENT_3D('',#46006,#46007,#46008); +#46006 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#46007 = DIRECTION('',(-1.,0.,0.)); +#46008 = DIRECTION('',(0.,-1.,0.)); +#46009 = ADVANCED_FACE('',(#46010),#46026,.T.); +#46010 = FACE_BOUND('',#46011,.T.); +#46011 = EDGE_LOOP('',(#46012,#46018,#46024,#46025)); +#46012 = ORIENTED_EDGE('',*,*,#46013,.T.); +#46013 = EDGE_CURVE('',#37298,#43513,#46014,.T.); +#46014 = LINE('',#46015,#46016); +#46015 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#46016 = VECTOR('',#46017,1.); +#46017 = DIRECTION('',(-0.,-0.,-1.)); +#46018 = ORIENTED_EDGE('',*,*,#46019,.T.); +#46019 = EDGE_CURVE('',#43513,#43657,#46020,.T.); +#46020 = LINE('',#46021,#46022); +#46021 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#46022 = VECTOR('',#46023,1.); +#46023 = DIRECTION('',(1.,0.,0.)); +#46024 = ORIENTED_EDGE('',*,*,#45996,.F.); +#46025 = ORIENTED_EDGE('',*,*,#37305,.F.); +#46026 = PLANE('',#46027); +#46027 = AXIS2_PLACEMENT_3D('',#46028,#46029,#46030); +#46028 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#46029 = DIRECTION('',(0.,-1.,0.)); +#46030 = DIRECTION('',(1.,0.,0.)); +#46031 = ADVANCED_FACE('',(#46032),#46038,.T.); +#46032 = FACE_BOUND('',#46033,.T.); +#46033 = EDGE_LOOP('',(#46034,#46035,#46036,#46037)); +#46034 = ORIENTED_EDGE('',*,*,#43459,.T.); +#46035 = ORIENTED_EDGE('',*,*,#43512,.T.); +#46036 = ORIENTED_EDGE('',*,*,#46013,.F.); +#46037 = ORIENTED_EDGE('',*,*,#37297,.F.); +#46038 = PLANE('',#46039); +#46039 = AXIS2_PLACEMENT_3D('',#46040,#46041,#46042); +#46040 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#46041 = DIRECTION('',(1.,0.,0.)); +#46042 = DIRECTION('',(-0.,1.,0.)); +#46043 = ADVANCED_FACE('',(#46044),#46055,.T.); +#46044 = FACE_BOUND('',#46045,.T.); +#46045 = EDGE_LOOP('',(#46046,#46052,#46053,#46054)); +#46046 = ORIENTED_EDGE('',*,*,#46047,.T.); +#46047 = EDGE_CURVE('',#37274,#43355,#46048,.T.); +#46048 = LINE('',#46049,#46050); +#46049 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#46050 = VECTOR('',#46051,1.); +#46051 = DIRECTION('',(-0.,-0.,-1.)); +#46052 = ORIENTED_EDGE('',*,*,#43402,.T.); +#46053 = ORIENTED_EDGE('',*,*,#43466,.F.); +#46054 = ORIENTED_EDGE('',*,*,#37281,.F.); +#46055 = PLANE('',#46056); +#46056 = AXIS2_PLACEMENT_3D('',#46057,#46058,#46059); +#46057 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#46058 = DIRECTION('',(-1.,0.,0.)); +#46059 = DIRECTION('',(0.,-1.,0.)); +#46060 = ADVANCED_FACE('',(#46061),#46077,.T.); +#46061 = FACE_BOUND('',#46062,.T.); +#46062 = EDGE_LOOP('',(#46063,#46069,#46075,#46076)); +#46063 = ORIENTED_EDGE('',*,*,#46064,.T.); +#46064 = EDGE_CURVE('',#37266,#43211,#46065,.T.); +#46065 = LINE('',#46066,#46067); +#46066 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#46067 = VECTOR('',#46068,1.); +#46068 = DIRECTION('',(-0.,-0.,-1.)); +#46069 = ORIENTED_EDGE('',*,*,#46070,.T.); +#46070 = EDGE_CURVE('',#43211,#43355,#46071,.T.); +#46071 = LINE('',#46072,#46073); +#46072 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#46073 = VECTOR('',#46074,1.); +#46074 = DIRECTION('',(1.,0.,0.)); +#46075 = ORIENTED_EDGE('',*,*,#46047,.F.); +#46076 = ORIENTED_EDGE('',*,*,#37273,.F.); +#46077 = PLANE('',#46078); +#46078 = AXIS2_PLACEMENT_3D('',#46079,#46080,#46081); +#46079 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#46080 = DIRECTION('',(0.,-1.,0.)); +#46081 = DIRECTION('',(1.,0.,0.)); +#46082 = ADVANCED_FACE('',(#46083),#46089,.T.); +#46083 = FACE_BOUND('',#46084,.T.); +#46084 = EDGE_LOOP('',(#46085,#46086,#46087,#46088)); +#46085 = ORIENTED_EDGE('',*,*,#43157,.T.); +#46086 = ORIENTED_EDGE('',*,*,#43210,.T.); +#46087 = ORIENTED_EDGE('',*,*,#46064,.F.); +#46088 = ORIENTED_EDGE('',*,*,#37265,.F.); +#46089 = PLANE('',#46090); +#46090 = AXIS2_PLACEMENT_3D('',#46091,#46092,#46093); +#46091 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#46092 = DIRECTION('',(1.,0.,0.)); +#46093 = DIRECTION('',(-0.,1.,0.)); +#46094 = ADVANCED_FACE('',(#46095),#46106,.T.); +#46095 = FACE_BOUND('',#46096,.T.); +#46096 = EDGE_LOOP('',(#46097,#46103,#46104,#46105)); +#46097 = ORIENTED_EDGE('',*,*,#46098,.T.); +#46098 = EDGE_CURVE('',#37242,#43053,#46099,.T.); +#46099 = LINE('',#46100,#46101); +#46100 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#46101 = VECTOR('',#46102,1.); +#46102 = DIRECTION('',(-0.,-0.,-1.)); +#46103 = ORIENTED_EDGE('',*,*,#43100,.T.); +#46104 = ORIENTED_EDGE('',*,*,#43164,.F.); +#46105 = ORIENTED_EDGE('',*,*,#37249,.F.); +#46106 = PLANE('',#46107); +#46107 = AXIS2_PLACEMENT_3D('',#46108,#46109,#46110); +#46108 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#46109 = DIRECTION('',(-1.,0.,0.)); +#46110 = DIRECTION('',(0.,-1.,0.)); +#46111 = ADVANCED_FACE('',(#46112),#46128,.T.); +#46112 = FACE_BOUND('',#46113,.T.); +#46113 = EDGE_LOOP('',(#46114,#46120,#46126,#46127)); +#46114 = ORIENTED_EDGE('',*,*,#46115,.T.); +#46115 = EDGE_CURVE('',#37234,#42909,#46116,.T.); +#46116 = LINE('',#46117,#46118); +#46117 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#46118 = VECTOR('',#46119,1.); +#46119 = DIRECTION('',(-0.,-0.,-1.)); +#46120 = ORIENTED_EDGE('',*,*,#46121,.T.); +#46121 = EDGE_CURVE('',#42909,#43053,#46122,.T.); +#46122 = LINE('',#46123,#46124); +#46123 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#46124 = VECTOR('',#46125,1.); +#46125 = DIRECTION('',(1.,0.,0.)); +#46126 = ORIENTED_EDGE('',*,*,#46098,.F.); +#46127 = ORIENTED_EDGE('',*,*,#37241,.F.); +#46128 = PLANE('',#46129); +#46129 = AXIS2_PLACEMENT_3D('',#46130,#46131,#46132); +#46130 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#46131 = DIRECTION('',(0.,-1.,0.)); +#46132 = DIRECTION('',(1.,0.,0.)); +#46133 = ADVANCED_FACE('',(#46134),#46140,.T.); +#46134 = FACE_BOUND('',#46135,.T.); +#46135 = EDGE_LOOP('',(#46136,#46137,#46138,#46139)); +#46136 = ORIENTED_EDGE('',*,*,#42855,.T.); +#46137 = ORIENTED_EDGE('',*,*,#42908,.T.); +#46138 = ORIENTED_EDGE('',*,*,#46115,.F.); +#46139 = ORIENTED_EDGE('',*,*,#37233,.F.); +#46140 = PLANE('',#46141); +#46141 = AXIS2_PLACEMENT_3D('',#46142,#46143,#46144); +#46142 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#46143 = DIRECTION('',(1.,0.,0.)); +#46144 = DIRECTION('',(-0.,1.,0.)); +#46145 = ADVANCED_FACE('',(#46146),#46157,.T.); +#46146 = FACE_BOUND('',#46147,.T.); +#46147 = EDGE_LOOP('',(#46148,#46154,#46155,#46156)); +#46148 = ORIENTED_EDGE('',*,*,#46149,.T.); +#46149 = EDGE_CURVE('',#37210,#42751,#46150,.T.); +#46150 = LINE('',#46151,#46152); +#46151 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#46152 = VECTOR('',#46153,1.); +#46153 = DIRECTION('',(-0.,-0.,-1.)); +#46154 = ORIENTED_EDGE('',*,*,#42798,.T.); +#46155 = ORIENTED_EDGE('',*,*,#42862,.F.); +#46156 = ORIENTED_EDGE('',*,*,#37217,.F.); +#46157 = PLANE('',#46158); +#46158 = AXIS2_PLACEMENT_3D('',#46159,#46160,#46161); +#46159 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#46160 = DIRECTION('',(-1.,0.,0.)); +#46161 = DIRECTION('',(0.,-1.,0.)); +#46162 = ADVANCED_FACE('',(#46163),#46179,.T.); +#46163 = FACE_BOUND('',#46164,.T.); +#46164 = EDGE_LOOP('',(#46165,#46171,#46177,#46178)); +#46165 = ORIENTED_EDGE('',*,*,#46166,.T.); +#46166 = EDGE_CURVE('',#37202,#42607,#46167,.T.); +#46167 = LINE('',#46168,#46169); +#46168 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#46169 = VECTOR('',#46170,1.); +#46170 = DIRECTION('',(-0.,-0.,-1.)); +#46171 = ORIENTED_EDGE('',*,*,#46172,.T.); +#46172 = EDGE_CURVE('',#42607,#42751,#46173,.T.); +#46173 = LINE('',#46174,#46175); +#46174 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#46175 = VECTOR('',#46176,1.); +#46176 = DIRECTION('',(1.,0.,0.)); +#46177 = ORIENTED_EDGE('',*,*,#46149,.F.); +#46178 = ORIENTED_EDGE('',*,*,#37209,.F.); +#46179 = PLANE('',#46180); +#46180 = AXIS2_PLACEMENT_3D('',#46181,#46182,#46183); +#46181 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#46182 = DIRECTION('',(0.,-1.,0.)); +#46183 = DIRECTION('',(1.,0.,0.)); +#46184 = ADVANCED_FACE('',(#46185),#46191,.T.); +#46185 = FACE_BOUND('',#46186,.T.); +#46186 = EDGE_LOOP('',(#46187,#46188,#46189,#46190)); +#46187 = ORIENTED_EDGE('',*,*,#42553,.T.); +#46188 = ORIENTED_EDGE('',*,*,#42606,.T.); +#46189 = ORIENTED_EDGE('',*,*,#46166,.F.); +#46190 = ORIENTED_EDGE('',*,*,#37201,.F.); +#46191 = PLANE('',#46192); +#46192 = AXIS2_PLACEMENT_3D('',#46193,#46194,#46195); +#46193 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#46194 = DIRECTION('',(1.,0.,0.)); +#46195 = DIRECTION('',(-0.,1.,0.)); +#46196 = ADVANCED_FACE('',(#46197),#46208,.T.); +#46197 = FACE_BOUND('',#46198,.T.); +#46198 = EDGE_LOOP('',(#46199,#46205,#46206,#46207)); +#46199 = ORIENTED_EDGE('',*,*,#46200,.T.); +#46200 = EDGE_CURVE('',#37178,#42449,#46201,.T.); +#46201 = LINE('',#46202,#46203); +#46202 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#46203 = VECTOR('',#46204,1.); +#46204 = DIRECTION('',(-0.,-0.,-1.)); +#46205 = ORIENTED_EDGE('',*,*,#42496,.T.); +#46206 = ORIENTED_EDGE('',*,*,#42560,.F.); +#46207 = ORIENTED_EDGE('',*,*,#37185,.F.); +#46208 = PLANE('',#46209); +#46209 = AXIS2_PLACEMENT_3D('',#46210,#46211,#46212); +#46210 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#46211 = DIRECTION('',(-1.,0.,0.)); +#46212 = DIRECTION('',(0.,-1.,0.)); +#46213 = ADVANCED_FACE('',(#46214),#46230,.T.); +#46214 = FACE_BOUND('',#46215,.T.); +#46215 = EDGE_LOOP('',(#46216,#46222,#46228,#46229)); +#46216 = ORIENTED_EDGE('',*,*,#46217,.T.); +#46217 = EDGE_CURVE('',#37170,#42305,#46218,.T.); +#46218 = LINE('',#46219,#46220); +#46219 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#46220 = VECTOR('',#46221,1.); +#46221 = DIRECTION('',(-0.,-0.,-1.)); +#46222 = ORIENTED_EDGE('',*,*,#46223,.T.); +#46223 = EDGE_CURVE('',#42305,#42449,#46224,.T.); +#46224 = LINE('',#46225,#46226); +#46225 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#46226 = VECTOR('',#46227,1.); +#46227 = DIRECTION('',(1.,0.,0.)); +#46228 = ORIENTED_EDGE('',*,*,#46200,.F.); +#46229 = ORIENTED_EDGE('',*,*,#37177,.F.); +#46230 = PLANE('',#46231); +#46231 = AXIS2_PLACEMENT_3D('',#46232,#46233,#46234); +#46232 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#46233 = DIRECTION('',(0.,-1.,0.)); +#46234 = DIRECTION('',(1.,0.,0.)); +#46235 = ADVANCED_FACE('',(#46236),#46242,.T.); +#46236 = FACE_BOUND('',#46237,.T.); +#46237 = EDGE_LOOP('',(#46238,#46239,#46240,#46241)); +#46238 = ORIENTED_EDGE('',*,*,#42263,.T.); +#46239 = ORIENTED_EDGE('',*,*,#42304,.T.); +#46240 = ORIENTED_EDGE('',*,*,#46217,.F.); +#46241 = ORIENTED_EDGE('',*,*,#37169,.F.); +#46242 = PLANE('',#46243); +#46243 = AXIS2_PLACEMENT_3D('',#46244,#46245,#46246); +#46244 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#46245 = DIRECTION('',(1.,0.,0.)); +#46246 = DIRECTION('',(-0.,1.,0.)); +#46247 = ADVANCED_FACE('',(#46248),#46259,.T.); +#46248 = FACE_BOUND('',#46249,.T.); +#46249 = EDGE_LOOP('',(#46250,#46256,#46257,#46258)); +#46250 = ORIENTED_EDGE('',*,*,#46251,.T.); +#46251 = EDGE_CURVE('',#37138,#42113,#46252,.T.); +#46252 = LINE('',#46253,#46254); +#46253 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#46254 = VECTOR('',#46255,1.); +#46255 = DIRECTION('',(-0.,-0.,-1.)); +#46256 = ORIENTED_EDGE('',*,*,#42160,.T.); +#46257 = ORIENTED_EDGE('',*,*,#42216,.F.); +#46258 = ORIENTED_EDGE('',*,*,#37145,.F.); +#46259 = PLANE('',#46260); +#46260 = AXIS2_PLACEMENT_3D('',#46261,#46262,#46263); +#46261 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#46262 = DIRECTION('',(0.,1.,0.)); +#46263 = DIRECTION('',(-1.,0.,0.)); +#46264 = ADVANCED_FACE('',(#46265),#46281,.T.); +#46265 = FACE_BOUND('',#46266,.T.); +#46266 = EDGE_LOOP('',(#46267,#46273,#46279,#46280)); +#46267 = ORIENTED_EDGE('',*,*,#46268,.T.); +#46268 = EDGE_CURVE('',#37130,#41969,#46269,.T.); +#46269 = LINE('',#46270,#46271); +#46270 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#46271 = VECTOR('',#46272,1.); +#46272 = DIRECTION('',(-0.,-0.,-1.)); +#46273 = ORIENTED_EDGE('',*,*,#46274,.T.); +#46274 = EDGE_CURVE('',#41969,#42113,#46275,.T.); +#46275 = LINE('',#46276,#46277); +#46276 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#46277 = VECTOR('',#46278,1.); +#46278 = DIRECTION('',(0.,-1.,0.)); +#46279 = ORIENTED_EDGE('',*,*,#46251,.F.); +#46280 = ORIENTED_EDGE('',*,*,#37137,.F.); +#46281 = PLANE('',#46282); +#46282 = AXIS2_PLACEMENT_3D('',#46283,#46284,#46285); +#46283 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#46284 = DIRECTION('',(-1.,0.,0.)); +#46285 = DIRECTION('',(0.,-1.,0.)); +#46286 = ADVANCED_FACE('',(#46287),#46293,.T.); +#46287 = FACE_BOUND('',#46288,.T.); +#46288 = EDGE_LOOP('',(#46289,#46290,#46291,#46292)); +#46289 = ORIENTED_EDGE('',*,*,#41915,.T.); +#46290 = ORIENTED_EDGE('',*,*,#41968,.T.); +#46291 = ORIENTED_EDGE('',*,*,#46268,.F.); +#46292 = ORIENTED_EDGE('',*,*,#37129,.F.); +#46293 = PLANE('',#46294); +#46294 = AXIS2_PLACEMENT_3D('',#46295,#46296,#46297); +#46295 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#46296 = DIRECTION('',(0.,-1.,0.)); +#46297 = DIRECTION('',(1.,0.,0.)); +#46298 = ADVANCED_FACE('',(#46299),#46310,.T.); +#46299 = FACE_BOUND('',#46300,.T.); +#46300 = EDGE_LOOP('',(#46301,#46307,#46308,#46309)); +#46301 = ORIENTED_EDGE('',*,*,#46302,.T.); +#46302 = EDGE_CURVE('',#37106,#41811,#46303,.T.); +#46303 = LINE('',#46304,#46305); +#46304 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#46305 = VECTOR('',#46306,1.); +#46306 = DIRECTION('',(-0.,-0.,-1.)); +#46307 = ORIENTED_EDGE('',*,*,#41858,.T.); +#46308 = ORIENTED_EDGE('',*,*,#41922,.F.); +#46309 = ORIENTED_EDGE('',*,*,#37113,.F.); +#46310 = PLANE('',#46311); +#46311 = AXIS2_PLACEMENT_3D('',#46312,#46313,#46314); +#46312 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#46313 = DIRECTION('',(0.,1.,0.)); +#46314 = DIRECTION('',(-1.,0.,0.)); +#46315 = ADVANCED_FACE('',(#46316),#46332,.T.); +#46316 = FACE_BOUND('',#46317,.T.); +#46317 = EDGE_LOOP('',(#46318,#46324,#46330,#46331)); +#46318 = ORIENTED_EDGE('',*,*,#46319,.T.); +#46319 = EDGE_CURVE('',#37098,#41667,#46320,.T.); +#46320 = LINE('',#46321,#46322); +#46321 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#46322 = VECTOR('',#46323,1.); +#46323 = DIRECTION('',(-0.,-0.,-1.)); +#46324 = ORIENTED_EDGE('',*,*,#46325,.T.); +#46325 = EDGE_CURVE('',#41667,#41811,#46326,.T.); +#46326 = LINE('',#46327,#46328); +#46327 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#46328 = VECTOR('',#46329,1.); +#46329 = DIRECTION('',(0.,-1.,0.)); +#46330 = ORIENTED_EDGE('',*,*,#46302,.F.); +#46331 = ORIENTED_EDGE('',*,*,#37105,.F.); +#46332 = PLANE('',#46333); +#46333 = AXIS2_PLACEMENT_3D('',#46334,#46335,#46336); +#46334 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#46335 = DIRECTION('',(-1.,0.,0.)); +#46336 = DIRECTION('',(0.,-1.,0.)); +#46337 = ADVANCED_FACE('',(#46338),#46344,.T.); +#46338 = FACE_BOUND('',#46339,.T.); +#46339 = EDGE_LOOP('',(#46340,#46341,#46342,#46343)); +#46340 = ORIENTED_EDGE('',*,*,#41613,.T.); +#46341 = ORIENTED_EDGE('',*,*,#41666,.T.); +#46342 = ORIENTED_EDGE('',*,*,#46319,.F.); +#46343 = ORIENTED_EDGE('',*,*,#37097,.F.); +#46344 = PLANE('',#46345); +#46345 = AXIS2_PLACEMENT_3D('',#46346,#46347,#46348); +#46346 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#46347 = DIRECTION('',(0.,-1.,0.)); +#46348 = DIRECTION('',(1.,0.,0.)); +#46349 = ADVANCED_FACE('',(#46350),#46361,.T.); +#46350 = FACE_BOUND('',#46351,.T.); +#46351 = EDGE_LOOP('',(#46352,#46358,#46359,#46360)); +#46352 = ORIENTED_EDGE('',*,*,#46353,.T.); +#46353 = EDGE_CURVE('',#37074,#41509,#46354,.T.); +#46354 = LINE('',#46355,#46356); +#46355 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#46356 = VECTOR('',#46357,1.); +#46357 = DIRECTION('',(-0.,-0.,-1.)); +#46358 = ORIENTED_EDGE('',*,*,#41556,.T.); +#46359 = ORIENTED_EDGE('',*,*,#41620,.F.); +#46360 = ORIENTED_EDGE('',*,*,#37081,.F.); +#46361 = PLANE('',#46362); +#46362 = AXIS2_PLACEMENT_3D('',#46363,#46364,#46365); +#46363 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#46364 = DIRECTION('',(0.,1.,0.)); +#46365 = DIRECTION('',(-1.,0.,0.)); +#46366 = ADVANCED_FACE('',(#46367),#46383,.T.); +#46367 = FACE_BOUND('',#46368,.T.); +#46368 = EDGE_LOOP('',(#46369,#46375,#46381,#46382)); +#46369 = ORIENTED_EDGE('',*,*,#46370,.T.); +#46370 = EDGE_CURVE('',#37066,#41365,#46371,.T.); +#46371 = LINE('',#46372,#46373); +#46372 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#46373 = VECTOR('',#46374,1.); +#46374 = DIRECTION('',(-0.,-0.,-1.)); +#46375 = ORIENTED_EDGE('',*,*,#46376,.T.); +#46376 = EDGE_CURVE('',#41365,#41509,#46377,.T.); +#46377 = LINE('',#46378,#46379); +#46378 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#46379 = VECTOR('',#46380,1.); +#46380 = DIRECTION('',(0.,-1.,0.)); +#46381 = ORIENTED_EDGE('',*,*,#46353,.F.); +#46382 = ORIENTED_EDGE('',*,*,#37073,.F.); +#46383 = PLANE('',#46384); +#46384 = AXIS2_PLACEMENT_3D('',#46385,#46386,#46387); +#46385 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#46386 = DIRECTION('',(-1.,0.,0.)); +#46387 = DIRECTION('',(0.,-1.,0.)); +#46388 = ADVANCED_FACE('',(#46389),#46395,.T.); +#46389 = FACE_BOUND('',#46390,.T.); +#46390 = EDGE_LOOP('',(#46391,#46392,#46393,#46394)); +#46391 = ORIENTED_EDGE('',*,*,#41311,.T.); +#46392 = ORIENTED_EDGE('',*,*,#41364,.T.); +#46393 = ORIENTED_EDGE('',*,*,#46370,.F.); +#46394 = ORIENTED_EDGE('',*,*,#37065,.F.); +#46395 = PLANE('',#46396); +#46396 = AXIS2_PLACEMENT_3D('',#46397,#46398,#46399); +#46397 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#46398 = DIRECTION('',(0.,-1.,0.)); +#46399 = DIRECTION('',(1.,0.,0.)); +#46400 = ADVANCED_FACE('',(#46401),#46412,.T.); +#46401 = FACE_BOUND('',#46402,.T.); +#46402 = EDGE_LOOP('',(#46403,#46409,#46410,#46411)); +#46403 = ORIENTED_EDGE('',*,*,#46404,.T.); +#46404 = EDGE_CURVE('',#37042,#41207,#46405,.T.); +#46405 = LINE('',#46406,#46407); +#46406 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#46407 = VECTOR('',#46408,1.); +#46408 = DIRECTION('',(-0.,-0.,-1.)); +#46409 = ORIENTED_EDGE('',*,*,#41254,.T.); +#46410 = ORIENTED_EDGE('',*,*,#41318,.F.); +#46411 = ORIENTED_EDGE('',*,*,#37049,.F.); +#46412 = PLANE('',#46413); +#46413 = AXIS2_PLACEMENT_3D('',#46414,#46415,#46416); +#46414 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#46415 = DIRECTION('',(0.,1.,0.)); +#46416 = DIRECTION('',(-1.,0.,0.)); +#46417 = ADVANCED_FACE('',(#46418),#46434,.T.); +#46418 = FACE_BOUND('',#46419,.T.); +#46419 = EDGE_LOOP('',(#46420,#46426,#46432,#46433)); +#46420 = ORIENTED_EDGE('',*,*,#46421,.T.); +#46421 = EDGE_CURVE('',#37034,#41063,#46422,.T.); +#46422 = LINE('',#46423,#46424); +#46423 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#46424 = VECTOR('',#46425,1.); +#46425 = DIRECTION('',(-0.,-0.,-1.)); +#46426 = ORIENTED_EDGE('',*,*,#46427,.T.); +#46427 = EDGE_CURVE('',#41063,#41207,#46428,.T.); +#46428 = LINE('',#46429,#46430); +#46429 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#46430 = VECTOR('',#46431,1.); +#46431 = DIRECTION('',(0.,-1.,0.)); +#46432 = ORIENTED_EDGE('',*,*,#46404,.F.); +#46433 = ORIENTED_EDGE('',*,*,#37041,.F.); +#46434 = PLANE('',#46435); +#46435 = AXIS2_PLACEMENT_3D('',#46436,#46437,#46438); +#46436 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#46437 = DIRECTION('',(-1.,0.,0.)); +#46438 = DIRECTION('',(0.,-1.,0.)); +#46439 = ADVANCED_FACE('',(#46440),#46446,.T.); +#46440 = FACE_BOUND('',#46441,.T.); +#46441 = EDGE_LOOP('',(#46442,#46443,#46444,#46445)); +#46442 = ORIENTED_EDGE('',*,*,#41009,.T.); +#46443 = ORIENTED_EDGE('',*,*,#41062,.T.); +#46444 = ORIENTED_EDGE('',*,*,#46421,.F.); +#46445 = ORIENTED_EDGE('',*,*,#37033,.F.); +#46446 = PLANE('',#46447); +#46447 = AXIS2_PLACEMENT_3D('',#46448,#46449,#46450); +#46448 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#46449 = DIRECTION('',(0.,-1.,0.)); +#46450 = DIRECTION('',(1.,0.,0.)); +#46451 = ADVANCED_FACE('',(#46452),#46463,.T.); +#46452 = FACE_BOUND('',#46453,.T.); +#46453 = EDGE_LOOP('',(#46454,#46460,#46461,#46462)); +#46454 = ORIENTED_EDGE('',*,*,#46455,.T.); +#46455 = EDGE_CURVE('',#37010,#40905,#46456,.T.); +#46456 = LINE('',#46457,#46458); +#46457 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#46458 = VECTOR('',#46459,1.); +#46459 = DIRECTION('',(-0.,-0.,-1.)); +#46460 = ORIENTED_EDGE('',*,*,#40952,.T.); +#46461 = ORIENTED_EDGE('',*,*,#41016,.F.); +#46462 = ORIENTED_EDGE('',*,*,#37017,.F.); +#46463 = PLANE('',#46464); +#46464 = AXIS2_PLACEMENT_3D('',#46465,#46466,#46467); +#46465 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#46466 = DIRECTION('',(0.,1.,0.)); +#46467 = DIRECTION('',(-1.,0.,0.)); +#46468 = ADVANCED_FACE('',(#46469),#46485,.T.); +#46469 = FACE_BOUND('',#46470,.T.); +#46470 = EDGE_LOOP('',(#46471,#46477,#46483,#46484)); +#46471 = ORIENTED_EDGE('',*,*,#46472,.T.); +#46472 = EDGE_CURVE('',#37002,#40761,#46473,.T.); +#46473 = LINE('',#46474,#46475); +#46474 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#46475 = VECTOR('',#46476,1.); +#46476 = DIRECTION('',(-0.,-0.,-1.)); +#46477 = ORIENTED_EDGE('',*,*,#46478,.T.); +#46478 = EDGE_CURVE('',#40761,#40905,#46479,.T.); +#46479 = LINE('',#46480,#46481); +#46480 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#46481 = VECTOR('',#46482,1.); +#46482 = DIRECTION('',(0.,-1.,0.)); +#46483 = ORIENTED_EDGE('',*,*,#46455,.F.); +#46484 = ORIENTED_EDGE('',*,*,#37009,.F.); +#46485 = PLANE('',#46486); +#46486 = AXIS2_PLACEMENT_3D('',#46487,#46488,#46489); +#46487 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#46488 = DIRECTION('',(-1.,0.,0.)); +#46489 = DIRECTION('',(0.,-1.,0.)); +#46490 = ADVANCED_FACE('',(#46491),#46497,.T.); +#46491 = FACE_BOUND('',#46492,.T.); +#46492 = EDGE_LOOP('',(#46493,#46494,#46495,#46496)); +#46493 = ORIENTED_EDGE('',*,*,#40707,.T.); +#46494 = ORIENTED_EDGE('',*,*,#40760,.T.); +#46495 = ORIENTED_EDGE('',*,*,#46472,.F.); +#46496 = ORIENTED_EDGE('',*,*,#37001,.F.); +#46497 = PLANE('',#46498); +#46498 = AXIS2_PLACEMENT_3D('',#46499,#46500,#46501); +#46499 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#46500 = DIRECTION('',(0.,-1.,0.)); +#46501 = DIRECTION('',(1.,0.,0.)); +#46502 = ADVANCED_FACE('',(#46503),#46514,.T.); +#46503 = FACE_BOUND('',#46504,.T.); +#46504 = EDGE_LOOP('',(#46505,#46511,#46512,#46513)); +#46505 = ORIENTED_EDGE('',*,*,#46506,.T.); +#46506 = EDGE_CURVE('',#36978,#40603,#46507,.T.); +#46507 = LINE('',#46508,#46509); +#46508 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#46509 = VECTOR('',#46510,1.); +#46510 = DIRECTION('',(-0.,-0.,-1.)); +#46511 = ORIENTED_EDGE('',*,*,#40650,.T.); +#46512 = ORIENTED_EDGE('',*,*,#40714,.F.); +#46513 = ORIENTED_EDGE('',*,*,#36985,.F.); +#46514 = PLANE('',#46515); +#46515 = AXIS2_PLACEMENT_3D('',#46516,#46517,#46518); +#46516 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#46517 = DIRECTION('',(0.,1.,0.)); +#46518 = DIRECTION('',(-1.,0.,0.)); +#46519 = ADVANCED_FACE('',(#46520),#46536,.T.); +#46520 = FACE_BOUND('',#46521,.T.); +#46521 = EDGE_LOOP('',(#46522,#46528,#46534,#46535)); +#46522 = ORIENTED_EDGE('',*,*,#46523,.T.); +#46523 = EDGE_CURVE('',#36970,#40459,#46524,.T.); +#46524 = LINE('',#46525,#46526); +#46525 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#46526 = VECTOR('',#46527,1.); +#46527 = DIRECTION('',(-0.,-0.,-1.)); +#46528 = ORIENTED_EDGE('',*,*,#46529,.T.); +#46529 = EDGE_CURVE('',#40459,#40603,#46530,.T.); +#46530 = LINE('',#46531,#46532); +#46531 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#46532 = VECTOR('',#46533,1.); +#46533 = DIRECTION('',(0.,-1.,0.)); +#46534 = ORIENTED_EDGE('',*,*,#46506,.F.); +#46535 = ORIENTED_EDGE('',*,*,#36977,.F.); +#46536 = PLANE('',#46537); +#46537 = AXIS2_PLACEMENT_3D('',#46538,#46539,#46540); +#46538 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#46539 = DIRECTION('',(-1.,0.,0.)); +#46540 = DIRECTION('',(0.,-1.,0.)); +#46541 = ADVANCED_FACE('',(#46542),#46548,.T.); +#46542 = FACE_BOUND('',#46543,.T.); +#46543 = EDGE_LOOP('',(#46544,#46545,#46546,#46547)); +#46544 = ORIENTED_EDGE('',*,*,#40405,.T.); +#46545 = ORIENTED_EDGE('',*,*,#40458,.T.); +#46546 = ORIENTED_EDGE('',*,*,#46523,.F.); +#46547 = ORIENTED_EDGE('',*,*,#36969,.F.); +#46548 = PLANE('',#46549); +#46549 = AXIS2_PLACEMENT_3D('',#46550,#46551,#46552); +#46550 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#46551 = DIRECTION('',(0.,-1.,0.)); +#46552 = DIRECTION('',(1.,0.,0.)); +#46553 = ADVANCED_FACE('',(#46554),#46565,.T.); +#46554 = FACE_BOUND('',#46555,.T.); +#46555 = EDGE_LOOP('',(#46556,#46562,#46563,#46564)); +#46556 = ORIENTED_EDGE('',*,*,#46557,.T.); +#46557 = EDGE_CURVE('',#36946,#40301,#46558,.T.); +#46558 = LINE('',#46559,#46560); +#46559 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#46560 = VECTOR('',#46561,1.); +#46561 = DIRECTION('',(-0.,-0.,-1.)); +#46562 = ORIENTED_EDGE('',*,*,#40348,.T.); +#46563 = ORIENTED_EDGE('',*,*,#40412,.F.); +#46564 = ORIENTED_EDGE('',*,*,#36953,.F.); +#46565 = PLANE('',#46566); +#46566 = AXIS2_PLACEMENT_3D('',#46567,#46568,#46569); +#46567 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#46568 = DIRECTION('',(0.,1.,0.)); +#46569 = DIRECTION('',(-1.,0.,0.)); +#46570 = ADVANCED_FACE('',(#46571),#46587,.T.); +#46571 = FACE_BOUND('',#46572,.T.); +#46572 = EDGE_LOOP('',(#46573,#46579,#46585,#46586)); +#46573 = ORIENTED_EDGE('',*,*,#46574,.T.); +#46574 = EDGE_CURVE('',#36938,#40157,#46575,.T.); +#46575 = LINE('',#46576,#46577); +#46576 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#46577 = VECTOR('',#46578,1.); +#46578 = DIRECTION('',(-0.,-0.,-1.)); +#46579 = ORIENTED_EDGE('',*,*,#46580,.T.); +#46580 = EDGE_CURVE('',#40157,#40301,#46581,.T.); +#46581 = LINE('',#46582,#46583); +#46582 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#46583 = VECTOR('',#46584,1.); +#46584 = DIRECTION('',(0.,-1.,0.)); +#46585 = ORIENTED_EDGE('',*,*,#46557,.F.); +#46586 = ORIENTED_EDGE('',*,*,#36945,.F.); +#46587 = PLANE('',#46588); +#46588 = AXIS2_PLACEMENT_3D('',#46589,#46590,#46591); +#46589 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#46590 = DIRECTION('',(-1.,0.,0.)); +#46591 = DIRECTION('',(0.,-1.,0.)); +#46592 = ADVANCED_FACE('',(#46593),#46599,.T.); +#46593 = FACE_BOUND('',#46594,.T.); +#46594 = EDGE_LOOP('',(#46595,#46596,#46597,#46598)); +#46595 = ORIENTED_EDGE('',*,*,#40103,.T.); +#46596 = ORIENTED_EDGE('',*,*,#40156,.T.); +#46597 = ORIENTED_EDGE('',*,*,#46574,.F.); +#46598 = ORIENTED_EDGE('',*,*,#36937,.F.); +#46599 = PLANE('',#46600); +#46600 = AXIS2_PLACEMENT_3D('',#46601,#46602,#46603); +#46601 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#46602 = DIRECTION('',(0.,-1.,0.)); +#46603 = DIRECTION('',(1.,0.,0.)); +#46604 = ADVANCED_FACE('',(#46605),#46616,.T.); +#46605 = FACE_BOUND('',#46606,.T.); +#46606 = EDGE_LOOP('',(#46607,#46613,#46614,#46615)); +#46607 = ORIENTED_EDGE('',*,*,#46608,.T.); +#46608 = EDGE_CURVE('',#36914,#39999,#46609,.T.); +#46609 = LINE('',#46610,#46611); +#46610 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#46611 = VECTOR('',#46612,1.); +#46612 = DIRECTION('',(-0.,-0.,-1.)); +#46613 = ORIENTED_EDGE('',*,*,#40046,.T.); +#46614 = ORIENTED_EDGE('',*,*,#40110,.F.); +#46615 = ORIENTED_EDGE('',*,*,#36921,.F.); +#46616 = PLANE('',#46617); +#46617 = AXIS2_PLACEMENT_3D('',#46618,#46619,#46620); +#46618 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#46619 = DIRECTION('',(0.,1.,0.)); +#46620 = DIRECTION('',(-1.,0.,0.)); +#46621 = ADVANCED_FACE('',(#46622),#46638,.T.); +#46622 = FACE_BOUND('',#46623,.T.); +#46623 = EDGE_LOOP('',(#46624,#46630,#46636,#46637)); +#46624 = ORIENTED_EDGE('',*,*,#46625,.T.); +#46625 = EDGE_CURVE('',#36906,#39855,#46626,.T.); +#46626 = LINE('',#46627,#46628); +#46627 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#46628 = VECTOR('',#46629,1.); +#46629 = DIRECTION('',(-0.,-0.,-1.)); +#46630 = ORIENTED_EDGE('',*,*,#46631,.T.); +#46631 = EDGE_CURVE('',#39855,#39999,#46632,.T.); +#46632 = LINE('',#46633,#46634); +#46633 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#46634 = VECTOR('',#46635,1.); +#46635 = DIRECTION('',(0.,-1.,0.)); +#46636 = ORIENTED_EDGE('',*,*,#46608,.F.); +#46637 = ORIENTED_EDGE('',*,*,#36913,.F.); +#46638 = PLANE('',#46639); +#46639 = AXIS2_PLACEMENT_3D('',#46640,#46641,#46642); +#46640 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#46641 = DIRECTION('',(-1.,0.,0.)); +#46642 = DIRECTION('',(0.,-1.,0.)); +#46643 = ADVANCED_FACE('',(#46644),#46650,.T.); +#46644 = FACE_BOUND('',#46645,.T.); +#46645 = EDGE_LOOP('',(#46646,#46647,#46648,#46649)); +#46646 = ORIENTED_EDGE('',*,*,#39801,.T.); +#46647 = ORIENTED_EDGE('',*,*,#39854,.T.); +#46648 = ORIENTED_EDGE('',*,*,#46625,.F.); +#46649 = ORIENTED_EDGE('',*,*,#36905,.F.); +#46650 = PLANE('',#46651); +#46651 = AXIS2_PLACEMENT_3D('',#46652,#46653,#46654); +#46652 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#46653 = DIRECTION('',(0.,-1.,0.)); +#46654 = DIRECTION('',(1.,0.,0.)); +#46655 = ADVANCED_FACE('',(#46656),#46667,.T.); +#46656 = FACE_BOUND('',#46657,.T.); +#46657 = EDGE_LOOP('',(#46658,#46664,#46665,#46666)); +#46658 = ORIENTED_EDGE('',*,*,#46659,.T.); +#46659 = EDGE_CURVE('',#36882,#39697,#46660,.T.); +#46660 = LINE('',#46661,#46662); +#46661 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#46662 = VECTOR('',#46663,1.); +#46663 = DIRECTION('',(-0.,-0.,-1.)); +#46664 = ORIENTED_EDGE('',*,*,#39744,.T.); +#46665 = ORIENTED_EDGE('',*,*,#39808,.F.); +#46666 = ORIENTED_EDGE('',*,*,#36889,.F.); +#46667 = PLANE('',#46668); +#46668 = AXIS2_PLACEMENT_3D('',#46669,#46670,#46671); +#46669 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#46670 = DIRECTION('',(0.,1.,0.)); +#46671 = DIRECTION('',(-1.,0.,0.)); +#46672 = ADVANCED_FACE('',(#46673),#46689,.T.); +#46673 = FACE_BOUND('',#46674,.T.); +#46674 = EDGE_LOOP('',(#46675,#46681,#46687,#46688)); +#46675 = ORIENTED_EDGE('',*,*,#46676,.T.); +#46676 = EDGE_CURVE('',#36874,#39553,#46677,.T.); +#46677 = LINE('',#46678,#46679); +#46678 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#46679 = VECTOR('',#46680,1.); +#46680 = DIRECTION('',(-0.,-0.,-1.)); +#46681 = ORIENTED_EDGE('',*,*,#46682,.T.); +#46682 = EDGE_CURVE('',#39553,#39697,#46683,.T.); +#46683 = LINE('',#46684,#46685); +#46684 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#46685 = VECTOR('',#46686,1.); +#46686 = DIRECTION('',(0.,-1.,0.)); +#46687 = ORIENTED_EDGE('',*,*,#46659,.F.); +#46688 = ORIENTED_EDGE('',*,*,#36881,.F.); +#46689 = PLANE('',#46690); +#46690 = AXIS2_PLACEMENT_3D('',#46691,#46692,#46693); +#46691 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#46692 = DIRECTION('',(-1.,0.,0.)); +#46693 = DIRECTION('',(0.,-1.,0.)); +#46694 = ADVANCED_FACE('',(#46695),#46701,.T.); +#46695 = FACE_BOUND('',#46696,.T.); +#46696 = EDGE_LOOP('',(#46697,#46698,#46699,#46700)); +#46697 = ORIENTED_EDGE('',*,*,#39499,.T.); +#46698 = ORIENTED_EDGE('',*,*,#39552,.T.); +#46699 = ORIENTED_EDGE('',*,*,#46676,.F.); +#46700 = ORIENTED_EDGE('',*,*,#36873,.F.); +#46701 = PLANE('',#46702); +#46702 = AXIS2_PLACEMENT_3D('',#46703,#46704,#46705); +#46703 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#46704 = DIRECTION('',(0.,-1.,0.)); +#46705 = DIRECTION('',(1.,0.,0.)); +#46706 = ADVANCED_FACE('',(#46707),#46718,.T.); +#46707 = FACE_BOUND('',#46708,.T.); +#46708 = EDGE_LOOP('',(#46709,#46715,#46716,#46717)); +#46709 = ORIENTED_EDGE('',*,*,#46710,.T.); +#46710 = EDGE_CURVE('',#36850,#39395,#46711,.T.); +#46711 = LINE('',#46712,#46713); +#46712 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#46713 = VECTOR('',#46714,1.); +#46714 = DIRECTION('',(-0.,-0.,-1.)); +#46715 = ORIENTED_EDGE('',*,*,#39442,.T.); +#46716 = ORIENTED_EDGE('',*,*,#39506,.F.); +#46717 = ORIENTED_EDGE('',*,*,#36857,.F.); +#46718 = PLANE('',#46719); +#46719 = AXIS2_PLACEMENT_3D('',#46720,#46721,#46722); +#46720 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#46721 = DIRECTION('',(0.,1.,0.)); +#46722 = DIRECTION('',(-1.,0.,0.)); +#46723 = ADVANCED_FACE('',(#46724),#46740,.T.); +#46724 = FACE_BOUND('',#46725,.T.); +#46725 = EDGE_LOOP('',(#46726,#46732,#46738,#46739)); +#46726 = ORIENTED_EDGE('',*,*,#46727,.T.); +#46727 = EDGE_CURVE('',#36842,#39251,#46728,.T.); +#46728 = LINE('',#46729,#46730); +#46729 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#46730 = VECTOR('',#46731,1.); +#46731 = DIRECTION('',(-0.,-0.,-1.)); +#46732 = ORIENTED_EDGE('',*,*,#46733,.T.); +#46733 = EDGE_CURVE('',#39251,#39395,#46734,.T.); +#46734 = LINE('',#46735,#46736); +#46735 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#46736 = VECTOR('',#46737,1.); +#46737 = DIRECTION('',(0.,-1.,0.)); +#46738 = ORIENTED_EDGE('',*,*,#46710,.F.); +#46739 = ORIENTED_EDGE('',*,*,#36849,.F.); +#46740 = PLANE('',#46741); +#46741 = AXIS2_PLACEMENT_3D('',#46742,#46743,#46744); +#46742 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#46743 = DIRECTION('',(-1.,0.,0.)); +#46744 = DIRECTION('',(0.,-1.,0.)); +#46745 = ADVANCED_FACE('',(#46746),#46752,.T.); +#46746 = FACE_BOUND('',#46747,.T.); +#46747 = EDGE_LOOP('',(#46748,#46749,#46750,#46751)); +#46748 = ORIENTED_EDGE('',*,*,#39197,.T.); +#46749 = ORIENTED_EDGE('',*,*,#39250,.T.); +#46750 = ORIENTED_EDGE('',*,*,#46727,.F.); +#46751 = ORIENTED_EDGE('',*,*,#36841,.F.); +#46752 = PLANE('',#46753); +#46753 = AXIS2_PLACEMENT_3D('',#46754,#46755,#46756); +#46754 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#46755 = DIRECTION('',(0.,-1.,0.)); +#46756 = DIRECTION('',(1.,0.,0.)); +#46757 = ADVANCED_FACE('',(#46758),#46769,.T.); +#46758 = FACE_BOUND('',#46759,.T.); +#46759 = EDGE_LOOP('',(#46760,#46766,#46767,#46768)); +#46760 = ORIENTED_EDGE('',*,*,#46761,.T.); +#46761 = EDGE_CURVE('',#36818,#39093,#46762,.T.); +#46762 = LINE('',#46763,#46764); +#46763 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#46764 = VECTOR('',#46765,1.); +#46765 = DIRECTION('',(-0.,-0.,-1.)); +#46766 = ORIENTED_EDGE('',*,*,#39140,.T.); +#46767 = ORIENTED_EDGE('',*,*,#39204,.F.); +#46768 = ORIENTED_EDGE('',*,*,#36825,.F.); +#46769 = PLANE('',#46770); +#46770 = AXIS2_PLACEMENT_3D('',#46771,#46772,#46773); +#46771 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#46772 = DIRECTION('',(0.,1.,0.)); +#46773 = DIRECTION('',(-1.,0.,0.)); +#46774 = ADVANCED_FACE('',(#46775),#46791,.T.); +#46775 = FACE_BOUND('',#46776,.T.); +#46776 = EDGE_LOOP('',(#46777,#46783,#46789,#46790)); +#46777 = ORIENTED_EDGE('',*,*,#46778,.T.); +#46778 = EDGE_CURVE('',#36810,#38949,#46779,.T.); +#46779 = LINE('',#46780,#46781); +#46780 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#46781 = VECTOR('',#46782,1.); +#46782 = DIRECTION('',(-0.,-0.,-1.)); +#46783 = ORIENTED_EDGE('',*,*,#46784,.T.); +#46784 = EDGE_CURVE('',#38949,#39093,#46785,.T.); +#46785 = LINE('',#46786,#46787); +#46786 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#46787 = VECTOR('',#46788,1.); +#46788 = DIRECTION('',(0.,-1.,0.)); +#46789 = ORIENTED_EDGE('',*,*,#46761,.F.); +#46790 = ORIENTED_EDGE('',*,*,#36817,.F.); +#46791 = PLANE('',#46792); +#46792 = AXIS2_PLACEMENT_3D('',#46793,#46794,#46795); +#46793 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#46794 = DIRECTION('',(-1.,0.,0.)); +#46795 = DIRECTION('',(0.,-1.,0.)); +#46796 = ADVANCED_FACE('',(#46797),#46803,.T.); +#46797 = FACE_BOUND('',#46798,.T.); +#46798 = EDGE_LOOP('',(#46799,#46800,#46801,#46802)); +#46799 = ORIENTED_EDGE('',*,*,#38895,.T.); +#46800 = ORIENTED_EDGE('',*,*,#38948,.T.); +#46801 = ORIENTED_EDGE('',*,*,#46778,.F.); +#46802 = ORIENTED_EDGE('',*,*,#36809,.F.); +#46803 = PLANE('',#46804); +#46804 = AXIS2_PLACEMENT_3D('',#46805,#46806,#46807); +#46805 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#46806 = DIRECTION('',(0.,-1.,0.)); +#46807 = DIRECTION('',(1.,0.,0.)); +#46808 = ADVANCED_FACE('',(#46809),#46820,.T.); +#46809 = FACE_BOUND('',#46810,.T.); +#46810 = EDGE_LOOP('',(#46811,#46817,#46818,#46819)); +#46811 = ORIENTED_EDGE('',*,*,#46812,.T.); +#46812 = EDGE_CURVE('',#36786,#38791,#46813,.T.); +#46813 = LINE('',#46814,#46815); +#46814 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#46815 = VECTOR('',#46816,1.); +#46816 = DIRECTION('',(-0.,-0.,-1.)); +#46817 = ORIENTED_EDGE('',*,*,#38838,.T.); +#46818 = ORIENTED_EDGE('',*,*,#38902,.F.); +#46819 = ORIENTED_EDGE('',*,*,#36793,.F.); +#46820 = PLANE('',#46821); +#46821 = AXIS2_PLACEMENT_3D('',#46822,#46823,#46824); +#46822 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#46823 = DIRECTION('',(0.,1.,0.)); +#46824 = DIRECTION('',(-1.,0.,0.)); +#46825 = ADVANCED_FACE('',(#46826),#46842,.T.); +#46826 = FACE_BOUND('',#46827,.T.); +#46827 = EDGE_LOOP('',(#46828,#46834,#46840,#46841)); +#46828 = ORIENTED_EDGE('',*,*,#46829,.T.); +#46829 = EDGE_CURVE('',#36778,#38647,#46830,.T.); +#46830 = LINE('',#46831,#46832); +#46831 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#46832 = VECTOR('',#46833,1.); +#46833 = DIRECTION('',(-0.,-0.,-1.)); +#46834 = ORIENTED_EDGE('',*,*,#46835,.T.); +#46835 = EDGE_CURVE('',#38647,#38791,#46836,.T.); +#46836 = LINE('',#46837,#46838); +#46837 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#46838 = VECTOR('',#46839,1.); +#46839 = DIRECTION('',(0.,-1.,0.)); +#46840 = ORIENTED_EDGE('',*,*,#46812,.F.); +#46841 = ORIENTED_EDGE('',*,*,#36785,.F.); +#46842 = PLANE('',#46843); +#46843 = AXIS2_PLACEMENT_3D('',#46844,#46845,#46846); +#46844 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#46845 = DIRECTION('',(-1.,0.,0.)); +#46846 = DIRECTION('',(0.,-1.,0.)); +#46847 = ADVANCED_FACE('',(#46848),#46854,.T.); +#46848 = FACE_BOUND('',#46849,.T.); +#46849 = EDGE_LOOP('',(#46850,#46851,#46852,#46853)); +#46850 = ORIENTED_EDGE('',*,*,#38593,.T.); +#46851 = ORIENTED_EDGE('',*,*,#38646,.T.); +#46852 = ORIENTED_EDGE('',*,*,#46829,.F.); +#46853 = ORIENTED_EDGE('',*,*,#36777,.F.); +#46854 = PLANE('',#46855); +#46855 = AXIS2_PLACEMENT_3D('',#46856,#46857,#46858); +#46856 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#46857 = DIRECTION('',(0.,-1.,0.)); +#46858 = DIRECTION('',(1.,0.,0.)); +#46859 = ADVANCED_FACE('',(#46860),#46871,.T.); +#46860 = FACE_BOUND('',#46861,.T.); +#46861 = EDGE_LOOP('',(#46862,#46868,#46869,#46870)); +#46862 = ORIENTED_EDGE('',*,*,#46863,.T.); +#46863 = EDGE_CURVE('',#36754,#38489,#46864,.T.); +#46864 = LINE('',#46865,#46866); +#46865 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#46866 = VECTOR('',#46867,1.); +#46867 = DIRECTION('',(-0.,-0.,-1.)); +#46868 = ORIENTED_EDGE('',*,*,#38536,.T.); +#46869 = ORIENTED_EDGE('',*,*,#38600,.F.); +#46870 = ORIENTED_EDGE('',*,*,#36761,.F.); +#46871 = PLANE('',#46872); +#46872 = AXIS2_PLACEMENT_3D('',#46873,#46874,#46875); +#46873 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#46874 = DIRECTION('',(0.,1.,0.)); +#46875 = DIRECTION('',(-1.,0.,0.)); +#46876 = ADVANCED_FACE('',(#46877),#46893,.T.); +#46877 = FACE_BOUND('',#46878,.T.); +#46878 = EDGE_LOOP('',(#46879,#46885,#46891,#46892)); +#46879 = ORIENTED_EDGE('',*,*,#46880,.T.); +#46880 = EDGE_CURVE('',#36746,#38345,#46881,.T.); +#46881 = LINE('',#46882,#46883); +#46882 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#46883 = VECTOR('',#46884,1.); +#46884 = DIRECTION('',(-0.,-0.,-1.)); +#46885 = ORIENTED_EDGE('',*,*,#46886,.T.); +#46886 = EDGE_CURVE('',#38345,#38489,#46887,.T.); +#46887 = LINE('',#46888,#46889); +#46888 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#46889 = VECTOR('',#46890,1.); +#46890 = DIRECTION('',(0.,-1.,0.)); +#46891 = ORIENTED_EDGE('',*,*,#46863,.F.); +#46892 = ORIENTED_EDGE('',*,*,#36753,.F.); +#46893 = PLANE('',#46894); +#46894 = AXIS2_PLACEMENT_3D('',#46895,#46896,#46897); +#46895 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#46896 = DIRECTION('',(-1.,0.,0.)); +#46897 = DIRECTION('',(0.,-1.,0.)); +#46898 = ADVANCED_FACE('',(#46899),#46905,.T.); +#46899 = FACE_BOUND('',#46900,.T.); +#46900 = EDGE_LOOP('',(#46901,#46902,#46903,#46904)); +#46901 = ORIENTED_EDGE('',*,*,#38291,.T.); +#46902 = ORIENTED_EDGE('',*,*,#38344,.T.); +#46903 = ORIENTED_EDGE('',*,*,#46880,.F.); +#46904 = ORIENTED_EDGE('',*,*,#36745,.F.); +#46905 = PLANE('',#46906); +#46906 = AXIS2_PLACEMENT_3D('',#46907,#46908,#46909); +#46907 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#46908 = DIRECTION('',(0.,-1.,0.)); +#46909 = DIRECTION('',(1.,0.,0.)); +#46910 = ADVANCED_FACE('',(#46911),#46922,.T.); +#46911 = FACE_BOUND('',#46912,.T.); +#46912 = EDGE_LOOP('',(#46913,#46919,#46920,#46921)); +#46913 = ORIENTED_EDGE('',*,*,#46914,.T.); +#46914 = EDGE_CURVE('',#36722,#38187,#46915,.T.); +#46915 = LINE('',#46916,#46917); +#46916 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#46917 = VECTOR('',#46918,1.); +#46918 = DIRECTION('',(-0.,-0.,-1.)); +#46919 = ORIENTED_EDGE('',*,*,#38234,.T.); +#46920 = ORIENTED_EDGE('',*,*,#38298,.F.); +#46921 = ORIENTED_EDGE('',*,*,#36729,.F.); +#46922 = PLANE('',#46923); +#46923 = AXIS2_PLACEMENT_3D('',#46924,#46925,#46926); +#46924 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#46925 = DIRECTION('',(0.,1.,0.)); +#46926 = DIRECTION('',(-1.,0.,0.)); +#46927 = ADVANCED_FACE('',(#46928),#46939,.T.); +#46928 = FACE_BOUND('',#46929,.T.); +#46929 = EDGE_LOOP('',(#46930,#46931,#46937,#46938)); +#46930 = ORIENTED_EDGE('',*,*,#38017,.T.); +#46931 = ORIENTED_EDGE('',*,*,#46932,.T.); +#46932 = EDGE_CURVE('',#38010,#38187,#46933,.T.); +#46933 = LINE('',#46934,#46935); +#46934 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#46935 = VECTOR('',#46936,1.); +#46936 = DIRECTION('',(0.,-1.,0.)); +#46937 = ORIENTED_EDGE('',*,*,#46914,.F.); +#46938 = ORIENTED_EDGE('',*,*,#36721,.F.); +#46939 = PLANE('',#46940); +#46940 = AXIS2_PLACEMENT_3D('',#46941,#46942,#46943); +#46941 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#46942 = DIRECTION('',(-1.,0.,0.)); +#46943 = DIRECTION('',(0.,-1.,0.)); +#46944 = ADVANCED_FACE('',(#46945),#46951,.T.); +#46945 = FACE_BOUND('',#46946,.T.); +#46946 = EDGE_LOOP('',(#46947,#46948,#46949,#46950)); +#46947 = ORIENTED_EDGE('',*,*,#38090,.T.); +#46948 = ORIENTED_EDGE('',*,*,#38138,.T.); +#46949 = ORIENTED_EDGE('',*,*,#38186,.F.); +#46950 = ORIENTED_EDGE('',*,*,#46932,.F.); +#46951 = PLANE('',#46952); +#46952 = AXIS2_PLACEMENT_3D('',#46953,#46954,#46955); +#46953 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#46954 = DIRECTION('',(0.,0.,-1.)); +#46955 = DIRECTION('',(0.,-1.,0.)); +#46956 = ADVANCED_FACE('',(#46957),#46963,.T.); +#46957 = FACE_BOUND('',#46958,.F.); +#46958 = EDGE_LOOP('',(#46959,#46960,#46961,#46962)); +#46959 = ORIENTED_EDGE('',*,*,#38114,.T.); +#46960 = ORIENTED_EDGE('',*,*,#38162,.T.); +#46961 = ORIENTED_EDGE('',*,*,#38210,.F.); +#46962 = ORIENTED_EDGE('',*,*,#44943,.F.); +#46963 = PLANE('',#46964); +#46964 = AXIS2_PLACEMENT_3D('',#46965,#46966,#46967); +#46965 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#46966 = DIRECTION('',(-0.,-0.,-1.)); +#46967 = DIRECTION('',(0.,1.,-0.)); +#46968 = ADVANCED_FACE('',(#46969),#46975,.T.); +#46969 = FACE_BOUND('',#46970,.T.); +#46970 = EDGE_LOOP('',(#46971,#46972,#46973,#46974)); +#46971 = ORIENTED_EDGE('',*,*,#38392,.T.); +#46972 = ORIENTED_EDGE('',*,*,#38440,.T.); +#46973 = ORIENTED_EDGE('',*,*,#38488,.F.); +#46974 = ORIENTED_EDGE('',*,*,#46886,.F.); +#46975 = PLANE('',#46976); +#46976 = AXIS2_PLACEMENT_3D('',#46977,#46978,#46979); +#46977 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#46978 = DIRECTION('',(0.,0.,-1.)); +#46979 = DIRECTION('',(0.,-1.,0.)); +#46980 = ADVANCED_FACE('',(#46981),#46987,.T.); +#46981 = FACE_BOUND('',#46982,.F.); +#46982 = EDGE_LOOP('',(#46983,#46984,#46985,#46986)); +#46983 = ORIENTED_EDGE('',*,*,#38416,.T.); +#46984 = ORIENTED_EDGE('',*,*,#38464,.T.); +#46985 = ORIENTED_EDGE('',*,*,#38512,.F.); +#46986 = ORIENTED_EDGE('',*,*,#44994,.F.); +#46987 = PLANE('',#46988); +#46988 = AXIS2_PLACEMENT_3D('',#46989,#46990,#46991); +#46989 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#46990 = DIRECTION('',(-0.,-0.,-1.)); +#46991 = DIRECTION('',(0.,1.,-0.)); +#46992 = ADVANCED_FACE('',(#46993),#46999,.T.); +#46993 = FACE_BOUND('',#46994,.T.); +#46994 = EDGE_LOOP('',(#46995,#46996,#46997,#46998)); +#46995 = ORIENTED_EDGE('',*,*,#38694,.T.); +#46996 = ORIENTED_EDGE('',*,*,#38742,.T.); +#46997 = ORIENTED_EDGE('',*,*,#38790,.F.); +#46998 = ORIENTED_EDGE('',*,*,#46835,.F.); +#46999 = PLANE('',#47000); +#47000 = AXIS2_PLACEMENT_3D('',#47001,#47002,#47003); +#47001 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#47002 = DIRECTION('',(0.,0.,-1.)); +#47003 = DIRECTION('',(0.,-1.,0.)); +#47004 = ADVANCED_FACE('',(#47005),#47011,.T.); +#47005 = FACE_BOUND('',#47006,.F.); +#47006 = EDGE_LOOP('',(#47007,#47008,#47009,#47010)); +#47007 = ORIENTED_EDGE('',*,*,#38718,.T.); +#47008 = ORIENTED_EDGE('',*,*,#38766,.T.); +#47009 = ORIENTED_EDGE('',*,*,#38814,.F.); +#47010 = ORIENTED_EDGE('',*,*,#45045,.F.); +#47011 = PLANE('',#47012); +#47012 = AXIS2_PLACEMENT_3D('',#47013,#47014,#47015); +#47013 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#47014 = DIRECTION('',(-0.,-0.,-1.)); +#47015 = DIRECTION('',(0.,1.,-0.)); +#47016 = ADVANCED_FACE('',(#47017),#47023,.T.); +#47017 = FACE_BOUND('',#47018,.T.); +#47018 = EDGE_LOOP('',(#47019,#47020,#47021,#47022)); +#47019 = ORIENTED_EDGE('',*,*,#38996,.T.); +#47020 = ORIENTED_EDGE('',*,*,#39044,.T.); +#47021 = ORIENTED_EDGE('',*,*,#39092,.F.); +#47022 = ORIENTED_EDGE('',*,*,#46784,.F.); +#47023 = PLANE('',#47024); +#47024 = AXIS2_PLACEMENT_3D('',#47025,#47026,#47027); +#47025 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#47026 = DIRECTION('',(0.,0.,-1.)); +#47027 = DIRECTION('',(0.,-1.,0.)); +#47028 = ADVANCED_FACE('',(#47029),#47035,.T.); +#47029 = FACE_BOUND('',#47030,.F.); +#47030 = EDGE_LOOP('',(#47031,#47032,#47033,#47034)); +#47031 = ORIENTED_EDGE('',*,*,#39020,.T.); +#47032 = ORIENTED_EDGE('',*,*,#39068,.T.); +#47033 = ORIENTED_EDGE('',*,*,#39116,.F.); +#47034 = ORIENTED_EDGE('',*,*,#45096,.F.); +#47035 = PLANE('',#47036); +#47036 = AXIS2_PLACEMENT_3D('',#47037,#47038,#47039); +#47037 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#47038 = DIRECTION('',(-0.,-0.,-1.)); +#47039 = DIRECTION('',(0.,1.,-0.)); +#47040 = ADVANCED_FACE('',(#47041),#47047,.T.); +#47041 = FACE_BOUND('',#47042,.T.); +#47042 = EDGE_LOOP('',(#47043,#47044,#47045,#47046)); +#47043 = ORIENTED_EDGE('',*,*,#39298,.T.); +#47044 = ORIENTED_EDGE('',*,*,#39346,.T.); +#47045 = ORIENTED_EDGE('',*,*,#39394,.F.); +#47046 = ORIENTED_EDGE('',*,*,#46733,.F.); +#47047 = PLANE('',#47048); +#47048 = AXIS2_PLACEMENT_3D('',#47049,#47050,#47051); +#47049 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#47050 = DIRECTION('',(0.,0.,-1.)); +#47051 = DIRECTION('',(0.,-1.,0.)); +#47052 = ADVANCED_FACE('',(#47053),#47059,.T.); +#47053 = FACE_BOUND('',#47054,.F.); +#47054 = EDGE_LOOP('',(#47055,#47056,#47057,#47058)); +#47055 = ORIENTED_EDGE('',*,*,#39322,.T.); +#47056 = ORIENTED_EDGE('',*,*,#39370,.T.); +#47057 = ORIENTED_EDGE('',*,*,#39418,.F.); +#47058 = ORIENTED_EDGE('',*,*,#45147,.F.); +#47059 = PLANE('',#47060); +#47060 = AXIS2_PLACEMENT_3D('',#47061,#47062,#47063); +#47061 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#47062 = DIRECTION('',(-0.,-0.,-1.)); +#47063 = DIRECTION('',(0.,1.,-0.)); +#47064 = ADVANCED_FACE('',(#47065),#47071,.T.); +#47065 = FACE_BOUND('',#47066,.T.); +#47066 = EDGE_LOOP('',(#47067,#47068,#47069,#47070)); +#47067 = ORIENTED_EDGE('',*,*,#39600,.T.); +#47068 = ORIENTED_EDGE('',*,*,#39648,.T.); +#47069 = ORIENTED_EDGE('',*,*,#39696,.F.); +#47070 = ORIENTED_EDGE('',*,*,#46682,.F.); +#47071 = PLANE('',#47072); +#47072 = AXIS2_PLACEMENT_3D('',#47073,#47074,#47075); +#47073 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#47074 = DIRECTION('',(0.,0.,-1.)); +#47075 = DIRECTION('',(0.,-1.,0.)); +#47076 = ADVANCED_FACE('',(#47077),#47083,.T.); +#47077 = FACE_BOUND('',#47078,.F.); +#47078 = EDGE_LOOP('',(#47079,#47080,#47081,#47082)); +#47079 = ORIENTED_EDGE('',*,*,#39624,.T.); +#47080 = ORIENTED_EDGE('',*,*,#39672,.T.); +#47081 = ORIENTED_EDGE('',*,*,#39720,.F.); +#47082 = ORIENTED_EDGE('',*,*,#45198,.F.); +#47083 = PLANE('',#47084); +#47084 = AXIS2_PLACEMENT_3D('',#47085,#47086,#47087); +#47085 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#47086 = DIRECTION('',(-0.,-0.,-1.)); +#47087 = DIRECTION('',(0.,1.,-0.)); +#47088 = ADVANCED_FACE('',(#47089),#47095,.T.); +#47089 = FACE_BOUND('',#47090,.T.); +#47090 = EDGE_LOOP('',(#47091,#47092,#47093,#47094)); +#47091 = ORIENTED_EDGE('',*,*,#39902,.T.); +#47092 = ORIENTED_EDGE('',*,*,#39950,.T.); +#47093 = ORIENTED_EDGE('',*,*,#39998,.F.); +#47094 = ORIENTED_EDGE('',*,*,#46631,.F.); +#47095 = PLANE('',#47096); +#47096 = AXIS2_PLACEMENT_3D('',#47097,#47098,#47099); +#47097 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#47098 = DIRECTION('',(0.,0.,-1.)); +#47099 = DIRECTION('',(0.,-1.,0.)); +#47100 = ADVANCED_FACE('',(#47101),#47107,.T.); +#47101 = FACE_BOUND('',#47102,.F.); +#47102 = EDGE_LOOP('',(#47103,#47104,#47105,#47106)); +#47103 = ORIENTED_EDGE('',*,*,#39926,.T.); +#47104 = ORIENTED_EDGE('',*,*,#39974,.T.); +#47105 = ORIENTED_EDGE('',*,*,#40022,.F.); +#47106 = ORIENTED_EDGE('',*,*,#45249,.F.); +#47107 = PLANE('',#47108); +#47108 = AXIS2_PLACEMENT_3D('',#47109,#47110,#47111); +#47109 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#47110 = DIRECTION('',(-0.,-0.,-1.)); +#47111 = DIRECTION('',(0.,1.,-0.)); +#47112 = ADVANCED_FACE('',(#47113),#47119,.T.); +#47113 = FACE_BOUND('',#47114,.T.); +#47114 = EDGE_LOOP('',(#47115,#47116,#47117,#47118)); +#47115 = ORIENTED_EDGE('',*,*,#40204,.T.); +#47116 = ORIENTED_EDGE('',*,*,#40252,.T.); +#47117 = ORIENTED_EDGE('',*,*,#40300,.F.); +#47118 = ORIENTED_EDGE('',*,*,#46580,.F.); +#47119 = PLANE('',#47120); +#47120 = AXIS2_PLACEMENT_3D('',#47121,#47122,#47123); +#47121 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#47122 = DIRECTION('',(0.,0.,-1.)); +#47123 = DIRECTION('',(0.,-1.,0.)); +#47124 = ADVANCED_FACE('',(#47125),#47131,.T.); +#47125 = FACE_BOUND('',#47126,.F.); +#47126 = EDGE_LOOP('',(#47127,#47128,#47129,#47130)); +#47127 = ORIENTED_EDGE('',*,*,#40228,.T.); +#47128 = ORIENTED_EDGE('',*,*,#40276,.T.); +#47129 = ORIENTED_EDGE('',*,*,#40324,.F.); +#47130 = ORIENTED_EDGE('',*,*,#45300,.F.); +#47131 = PLANE('',#47132); +#47132 = AXIS2_PLACEMENT_3D('',#47133,#47134,#47135); +#47133 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#47134 = DIRECTION('',(-0.,-0.,-1.)); +#47135 = DIRECTION('',(0.,1.,-0.)); +#47136 = ADVANCED_FACE('',(#47137),#47143,.T.); +#47137 = FACE_BOUND('',#47138,.T.); +#47138 = EDGE_LOOP('',(#47139,#47140,#47141,#47142)); +#47139 = ORIENTED_EDGE('',*,*,#40506,.T.); +#47140 = ORIENTED_EDGE('',*,*,#40554,.T.); +#47141 = ORIENTED_EDGE('',*,*,#40602,.F.); +#47142 = ORIENTED_EDGE('',*,*,#46529,.F.); +#47143 = PLANE('',#47144); +#47144 = AXIS2_PLACEMENT_3D('',#47145,#47146,#47147); +#47145 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#47146 = DIRECTION('',(0.,0.,-1.)); +#47147 = DIRECTION('',(0.,-1.,0.)); +#47148 = ADVANCED_FACE('',(#47149),#47155,.T.); +#47149 = FACE_BOUND('',#47150,.F.); +#47150 = EDGE_LOOP('',(#47151,#47152,#47153,#47154)); +#47151 = ORIENTED_EDGE('',*,*,#40530,.T.); +#47152 = ORIENTED_EDGE('',*,*,#40578,.T.); +#47153 = ORIENTED_EDGE('',*,*,#40626,.F.); +#47154 = ORIENTED_EDGE('',*,*,#45351,.F.); +#47155 = PLANE('',#47156); +#47156 = AXIS2_PLACEMENT_3D('',#47157,#47158,#47159); +#47157 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#47158 = DIRECTION('',(-0.,-0.,-1.)); +#47159 = DIRECTION('',(0.,1.,-0.)); +#47160 = ADVANCED_FACE('',(#47161),#47167,.T.); +#47161 = FACE_BOUND('',#47162,.T.); +#47162 = EDGE_LOOP('',(#47163,#47164,#47165,#47166)); +#47163 = ORIENTED_EDGE('',*,*,#40808,.T.); +#47164 = ORIENTED_EDGE('',*,*,#40856,.T.); +#47165 = ORIENTED_EDGE('',*,*,#40904,.F.); +#47166 = ORIENTED_EDGE('',*,*,#46478,.F.); +#47167 = PLANE('',#47168); +#47168 = AXIS2_PLACEMENT_3D('',#47169,#47170,#47171); +#47169 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#47170 = DIRECTION('',(0.,0.,-1.)); +#47171 = DIRECTION('',(0.,-1.,0.)); +#47172 = ADVANCED_FACE('',(#47173),#47179,.T.); +#47173 = FACE_BOUND('',#47174,.F.); +#47174 = EDGE_LOOP('',(#47175,#47176,#47177,#47178)); +#47175 = ORIENTED_EDGE('',*,*,#40832,.T.); +#47176 = ORIENTED_EDGE('',*,*,#40880,.T.); +#47177 = ORIENTED_EDGE('',*,*,#40928,.F.); +#47178 = ORIENTED_EDGE('',*,*,#45402,.F.); +#47179 = PLANE('',#47180); +#47180 = AXIS2_PLACEMENT_3D('',#47181,#47182,#47183); +#47181 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#47182 = DIRECTION('',(-0.,-0.,-1.)); +#47183 = DIRECTION('',(0.,1.,-0.)); +#47184 = ADVANCED_FACE('',(#47185),#47191,.T.); +#47185 = FACE_BOUND('',#47186,.T.); +#47186 = EDGE_LOOP('',(#47187,#47188,#47189,#47190)); +#47187 = ORIENTED_EDGE('',*,*,#41110,.T.); +#47188 = ORIENTED_EDGE('',*,*,#41158,.T.); +#47189 = ORIENTED_EDGE('',*,*,#41206,.F.); +#47190 = ORIENTED_EDGE('',*,*,#46427,.F.); +#47191 = PLANE('',#47192); +#47192 = AXIS2_PLACEMENT_3D('',#47193,#47194,#47195); +#47193 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#47194 = DIRECTION('',(0.,0.,-1.)); +#47195 = DIRECTION('',(0.,-1.,0.)); +#47196 = ADVANCED_FACE('',(#47197),#47203,.T.); +#47197 = FACE_BOUND('',#47198,.F.); +#47198 = EDGE_LOOP('',(#47199,#47200,#47201,#47202)); +#47199 = ORIENTED_EDGE('',*,*,#41134,.T.); +#47200 = ORIENTED_EDGE('',*,*,#41182,.T.); +#47201 = ORIENTED_EDGE('',*,*,#41230,.F.); +#47202 = ORIENTED_EDGE('',*,*,#45453,.F.); +#47203 = PLANE('',#47204); +#47204 = AXIS2_PLACEMENT_3D('',#47205,#47206,#47207); +#47205 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#47206 = DIRECTION('',(-0.,-0.,-1.)); +#47207 = DIRECTION('',(0.,1.,-0.)); +#47208 = ADVANCED_FACE('',(#47209),#47215,.T.); +#47209 = FACE_BOUND('',#47210,.T.); +#47210 = EDGE_LOOP('',(#47211,#47212,#47213,#47214)); +#47211 = ORIENTED_EDGE('',*,*,#41412,.T.); +#47212 = ORIENTED_EDGE('',*,*,#41460,.T.); +#47213 = ORIENTED_EDGE('',*,*,#41508,.F.); +#47214 = ORIENTED_EDGE('',*,*,#46376,.F.); +#47215 = PLANE('',#47216); +#47216 = AXIS2_PLACEMENT_3D('',#47217,#47218,#47219); +#47217 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#47218 = DIRECTION('',(0.,0.,-1.)); +#47219 = DIRECTION('',(0.,-1.,0.)); +#47220 = ADVANCED_FACE('',(#47221),#47227,.T.); +#47221 = FACE_BOUND('',#47222,.F.); +#47222 = EDGE_LOOP('',(#47223,#47224,#47225,#47226)); +#47223 = ORIENTED_EDGE('',*,*,#41436,.T.); +#47224 = ORIENTED_EDGE('',*,*,#41484,.T.); +#47225 = ORIENTED_EDGE('',*,*,#41532,.F.); +#47226 = ORIENTED_EDGE('',*,*,#45504,.F.); +#47227 = PLANE('',#47228); +#47228 = AXIS2_PLACEMENT_3D('',#47229,#47230,#47231); +#47229 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#47230 = DIRECTION('',(-0.,-0.,-1.)); +#47231 = DIRECTION('',(0.,1.,-0.)); +#47232 = ADVANCED_FACE('',(#47233),#47239,.T.); +#47233 = FACE_BOUND('',#47234,.T.); +#47234 = EDGE_LOOP('',(#47235,#47236,#47237,#47238)); +#47235 = ORIENTED_EDGE('',*,*,#41714,.T.); +#47236 = ORIENTED_EDGE('',*,*,#41762,.T.); +#47237 = ORIENTED_EDGE('',*,*,#41810,.F.); +#47238 = ORIENTED_EDGE('',*,*,#46325,.F.); +#47239 = PLANE('',#47240); +#47240 = AXIS2_PLACEMENT_3D('',#47241,#47242,#47243); +#47241 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#47242 = DIRECTION('',(0.,0.,-1.)); +#47243 = DIRECTION('',(0.,-1.,0.)); +#47244 = ADVANCED_FACE('',(#47245),#47251,.T.); +#47245 = FACE_BOUND('',#47246,.F.); +#47246 = EDGE_LOOP('',(#47247,#47248,#47249,#47250)); +#47247 = ORIENTED_EDGE('',*,*,#41738,.T.); +#47248 = ORIENTED_EDGE('',*,*,#41786,.T.); +#47249 = ORIENTED_EDGE('',*,*,#41834,.F.); +#47250 = ORIENTED_EDGE('',*,*,#45555,.F.); +#47251 = PLANE('',#47252); +#47252 = AXIS2_PLACEMENT_3D('',#47253,#47254,#47255); +#47253 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#47254 = DIRECTION('',(-0.,-0.,-1.)); +#47255 = DIRECTION('',(0.,1.,-0.)); +#47256 = ADVANCED_FACE('',(#47257),#47263,.T.); +#47257 = FACE_BOUND('',#47258,.T.); +#47258 = EDGE_LOOP('',(#47259,#47260,#47261,#47262)); +#47259 = ORIENTED_EDGE('',*,*,#42016,.T.); +#47260 = ORIENTED_EDGE('',*,*,#42064,.T.); +#47261 = ORIENTED_EDGE('',*,*,#42112,.F.); +#47262 = ORIENTED_EDGE('',*,*,#46274,.F.); +#47263 = PLANE('',#47264); +#47264 = AXIS2_PLACEMENT_3D('',#47265,#47266,#47267); +#47265 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#47266 = DIRECTION('',(0.,0.,-1.)); +#47267 = DIRECTION('',(0.,-1.,0.)); +#47268 = ADVANCED_FACE('',(#47269),#47275,.T.); +#47269 = FACE_BOUND('',#47270,.F.); +#47270 = EDGE_LOOP('',(#47271,#47272,#47273,#47274)); +#47271 = ORIENTED_EDGE('',*,*,#42040,.T.); +#47272 = ORIENTED_EDGE('',*,*,#42088,.T.); +#47273 = ORIENTED_EDGE('',*,*,#42136,.F.); +#47274 = ORIENTED_EDGE('',*,*,#45606,.F.); +#47275 = PLANE('',#47276); +#47276 = AXIS2_PLACEMENT_3D('',#47277,#47278,#47279); +#47277 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#47278 = DIRECTION('',(-0.,-0.,-1.)); +#47279 = DIRECTION('',(0.,1.,-0.)); +#47280 = ADVANCED_FACE('',(#47281),#47287,.T.); +#47281 = FACE_BOUND('',#47282,.T.); +#47282 = EDGE_LOOP('',(#47283,#47284,#47285,#47286)); +#47283 = ORIENTED_EDGE('',*,*,#42352,.T.); +#47284 = ORIENTED_EDGE('',*,*,#42400,.T.); +#47285 = ORIENTED_EDGE('',*,*,#42448,.F.); +#47286 = ORIENTED_EDGE('',*,*,#46223,.F.); +#47287 = PLANE('',#47288); +#47288 = AXIS2_PLACEMENT_3D('',#47289,#47290,#47291); +#47289 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#47290 = DIRECTION('',(0.,0.,-1.)); +#47291 = DIRECTION('',(1.,0.,0.)); +#47292 = ADVANCED_FACE('',(#47293),#47299,.T.); +#47293 = FACE_BOUND('',#47294,.F.); +#47294 = EDGE_LOOP('',(#47295,#47296,#47297,#47298)); +#47295 = ORIENTED_EDGE('',*,*,#42376,.T.); +#47296 = ORIENTED_EDGE('',*,*,#42424,.T.); +#47297 = ORIENTED_EDGE('',*,*,#42472,.F.); +#47298 = ORIENTED_EDGE('',*,*,#45657,.F.); +#47299 = PLANE('',#47300); +#47300 = AXIS2_PLACEMENT_3D('',#47301,#47302,#47303); +#47301 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#47302 = DIRECTION('',(0.,0.,-1.)); +#47303 = DIRECTION('',(1.,0.,0.)); +#47304 = ADVANCED_FACE('',(#47305),#47311,.T.); +#47305 = FACE_BOUND('',#47306,.T.); +#47306 = EDGE_LOOP('',(#47307,#47308,#47309,#47310)); +#47307 = ORIENTED_EDGE('',*,*,#42654,.T.); +#47308 = ORIENTED_EDGE('',*,*,#42702,.T.); +#47309 = ORIENTED_EDGE('',*,*,#42750,.F.); +#47310 = ORIENTED_EDGE('',*,*,#46172,.F.); +#47311 = PLANE('',#47312); +#47312 = AXIS2_PLACEMENT_3D('',#47313,#47314,#47315); +#47313 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#47314 = DIRECTION('',(0.,0.,-1.)); +#47315 = DIRECTION('',(1.,0.,0.)); +#47316 = ADVANCED_FACE('',(#47317),#47323,.T.); +#47317 = FACE_BOUND('',#47318,.F.); +#47318 = EDGE_LOOP('',(#47319,#47320,#47321,#47322)); +#47319 = ORIENTED_EDGE('',*,*,#42678,.T.); +#47320 = ORIENTED_EDGE('',*,*,#42726,.T.); +#47321 = ORIENTED_EDGE('',*,*,#42774,.F.); +#47322 = ORIENTED_EDGE('',*,*,#45708,.F.); +#47323 = PLANE('',#47324); +#47324 = AXIS2_PLACEMENT_3D('',#47325,#47326,#47327); +#47325 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#47326 = DIRECTION('',(0.,0.,-1.)); +#47327 = DIRECTION('',(1.,0.,0.)); +#47328 = ADVANCED_FACE('',(#47329),#47335,.T.); +#47329 = FACE_BOUND('',#47330,.T.); +#47330 = EDGE_LOOP('',(#47331,#47332,#47333,#47334)); +#47331 = ORIENTED_EDGE('',*,*,#42956,.T.); +#47332 = ORIENTED_EDGE('',*,*,#43004,.T.); +#47333 = ORIENTED_EDGE('',*,*,#43052,.F.); +#47334 = ORIENTED_EDGE('',*,*,#46121,.F.); +#47335 = PLANE('',#47336); +#47336 = AXIS2_PLACEMENT_3D('',#47337,#47338,#47339); +#47337 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#47338 = DIRECTION('',(0.,0.,-1.)); +#47339 = DIRECTION('',(1.,0.,0.)); +#47340 = ADVANCED_FACE('',(#47341),#47347,.T.); +#47341 = FACE_BOUND('',#47342,.F.); +#47342 = EDGE_LOOP('',(#47343,#47344,#47345,#47346)); +#47343 = ORIENTED_EDGE('',*,*,#42980,.T.); +#47344 = ORIENTED_EDGE('',*,*,#43028,.T.); +#47345 = ORIENTED_EDGE('',*,*,#43076,.F.); +#47346 = ORIENTED_EDGE('',*,*,#45759,.F.); +#47347 = PLANE('',#47348); +#47348 = AXIS2_PLACEMENT_3D('',#47349,#47350,#47351); +#47349 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#47350 = DIRECTION('',(0.,0.,-1.)); +#47351 = DIRECTION('',(1.,0.,0.)); +#47352 = ADVANCED_FACE('',(#47353),#47359,.T.); +#47353 = FACE_BOUND('',#47354,.T.); +#47354 = EDGE_LOOP('',(#47355,#47356,#47357,#47358)); +#47355 = ORIENTED_EDGE('',*,*,#43258,.T.); +#47356 = ORIENTED_EDGE('',*,*,#43306,.T.); +#47357 = ORIENTED_EDGE('',*,*,#43354,.F.); +#47358 = ORIENTED_EDGE('',*,*,#46070,.F.); +#47359 = PLANE('',#47360); +#47360 = AXIS2_PLACEMENT_3D('',#47361,#47362,#47363); +#47361 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#47362 = DIRECTION('',(0.,0.,-1.)); +#47363 = DIRECTION('',(1.,0.,0.)); +#47364 = ADVANCED_FACE('',(#47365),#47371,.T.); +#47365 = FACE_BOUND('',#47366,.F.); +#47366 = EDGE_LOOP('',(#47367,#47368,#47369,#47370)); +#47367 = ORIENTED_EDGE('',*,*,#43282,.T.); +#47368 = ORIENTED_EDGE('',*,*,#43330,.T.); +#47369 = ORIENTED_EDGE('',*,*,#43378,.F.); +#47370 = ORIENTED_EDGE('',*,*,#45810,.F.); +#47371 = PLANE('',#47372); +#47372 = AXIS2_PLACEMENT_3D('',#47373,#47374,#47375); +#47373 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#47374 = DIRECTION('',(0.,0.,-1.)); +#47375 = DIRECTION('',(1.,0.,0.)); +#47376 = ADVANCED_FACE('',(#47377),#47383,.T.); +#47377 = FACE_BOUND('',#47378,.T.); +#47378 = EDGE_LOOP('',(#47379,#47380,#47381,#47382)); +#47379 = ORIENTED_EDGE('',*,*,#43560,.T.); +#47380 = ORIENTED_EDGE('',*,*,#43608,.T.); +#47381 = ORIENTED_EDGE('',*,*,#43656,.F.); +#47382 = ORIENTED_EDGE('',*,*,#46019,.F.); +#47383 = PLANE('',#47384); +#47384 = AXIS2_PLACEMENT_3D('',#47385,#47386,#47387); +#47385 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#47386 = DIRECTION('',(0.,0.,-1.)); +#47387 = DIRECTION('',(1.,0.,0.)); +#47388 = ADVANCED_FACE('',(#47389),#47395,.T.); +#47389 = FACE_BOUND('',#47390,.F.); +#47390 = EDGE_LOOP('',(#47391,#47392,#47393,#47394)); +#47391 = ORIENTED_EDGE('',*,*,#43584,.T.); +#47392 = ORIENTED_EDGE('',*,*,#43632,.T.); +#47393 = ORIENTED_EDGE('',*,*,#43680,.F.); +#47394 = ORIENTED_EDGE('',*,*,#45861,.F.); +#47395 = PLANE('',#47396); +#47396 = AXIS2_PLACEMENT_3D('',#47397,#47398,#47399); +#47397 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#47398 = DIRECTION('',(0.,0.,-1.)); +#47399 = DIRECTION('',(1.,0.,0.)); +#47400 = ADVANCED_FACE('',(#47401),#47407,.T.); +#47401 = FACE_BOUND('',#47402,.T.); +#47402 = EDGE_LOOP('',(#47403,#47404,#47405,#47406)); +#47403 = ORIENTED_EDGE('',*,*,#43862,.T.); +#47404 = ORIENTED_EDGE('',*,*,#43910,.T.); +#47405 = ORIENTED_EDGE('',*,*,#43958,.F.); +#47406 = ORIENTED_EDGE('',*,*,#45968,.F.); +#47407 = PLANE('',#47408); +#47408 = AXIS2_PLACEMENT_3D('',#47409,#47410,#47411); +#47409 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#47410 = DIRECTION('',(0.,0.,-1.)); +#47411 = DIRECTION('',(1.,0.,0.)); +#47412 = ADVANCED_FACE('',(#47413),#47419,.T.); +#47413 = FACE_BOUND('',#47414,.F.); +#47414 = EDGE_LOOP('',(#47415,#47416,#47417,#47418)); +#47415 = ORIENTED_EDGE('',*,*,#43886,.T.); +#47416 = ORIENTED_EDGE('',*,*,#43934,.T.); +#47417 = ORIENTED_EDGE('',*,*,#43982,.F.); +#47418 = ORIENTED_EDGE('',*,*,#45912,.F.); +#47419 = PLANE('',#47420); +#47420 = AXIS2_PLACEMENT_3D('',#47421,#47422,#47423); +#47421 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#47422 = DIRECTION('',(0.,0.,-1.)); +#47423 = DIRECTION('',(1.,0.,0.)); +#47424 = ADVANCED_FACE('',(#47425),#47431,.F.); +#47425 = FACE_BOUND('',#47426,.F.); +#47426 = EDGE_LOOP('',(#47427,#47428,#47429,#47430)); +#47427 = ORIENTED_EDGE('',*,*,#44086,.T.); +#47428 = ORIENTED_EDGE('',*,*,#44110,.T.); +#47429 = ORIENTED_EDGE('',*,*,#44134,.T.); +#47430 = ORIENTED_EDGE('',*,*,#44158,.T.); +#47431 = PLANE('',#47432); +#47432 = AXIS2_PLACEMENT_3D('',#47433,#47434,#47435); +#47433 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47434 = DIRECTION('',(0.,0.,1.)); +#47435 = DIRECTION('',(1.,0.,-0.)); +#47436 = ADVANCED_FACE('',(#47437),#47443,.F.); +#47437 = FACE_BOUND('',#47438,.F.); +#47438 = EDGE_LOOP('',(#47439,#47440,#47441,#47442)); +#47439 = ORIENTED_EDGE('',*,*,#44182,.T.); +#47440 = ORIENTED_EDGE('',*,*,#44206,.T.); +#47441 = ORIENTED_EDGE('',*,*,#44230,.T.); +#47442 = ORIENTED_EDGE('',*,*,#44254,.T.); +#47443 = PLANE('',#47444); +#47444 = AXIS2_PLACEMENT_3D('',#47445,#47446,#47447); +#47445 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47446 = DIRECTION('',(0.,0.,1.)); +#47447 = DIRECTION('',(1.,0.,-0.)); +#47448 = ADVANCED_FACE('',(#47449),#47455,.F.); +#47449 = FACE_BOUND('',#47450,.F.); +#47450 = EDGE_LOOP('',(#47451,#47452,#47453,#47454)); +#47451 = ORIENTED_EDGE('',*,*,#44278,.T.); +#47452 = ORIENTED_EDGE('',*,*,#44302,.T.); +#47453 = ORIENTED_EDGE('',*,*,#44326,.T.); +#47454 = ORIENTED_EDGE('',*,*,#44350,.T.); +#47455 = PLANE('',#47456); +#47456 = AXIS2_PLACEMENT_3D('',#47457,#47458,#47459); +#47457 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47458 = DIRECTION('',(0.,0.,1.)); +#47459 = DIRECTION('',(1.,0.,-0.)); +#47460 = ADVANCED_FACE('',(#47461),#47467,.F.); +#47461 = FACE_BOUND('',#47462,.T.); +#47462 = EDGE_LOOP('',(#47463,#47464,#47465,#47466)); +#47463 = ORIENTED_EDGE('',*,*,#44446,.T.); +#47464 = ORIENTED_EDGE('',*,*,#44429,.T.); +#47465 = ORIENTED_EDGE('',*,*,#44405,.T.); +#47466 = ORIENTED_EDGE('',*,*,#44374,.T.); +#47467 = PLANE('',#47468); +#47468 = AXIS2_PLACEMENT_3D('',#47469,#47470,#47471); +#47469 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47470 = DIRECTION('',(0.,0.,1.)); +#47471 = DIRECTION('',(1.,0.,-0.)); +#47472 = ADVANCED_FACE('',(#47473),#47479,.F.); +#47473 = FACE_BOUND('',#47474,.T.); +#47474 = EDGE_LOOP('',(#47475,#47476,#47477,#47478)); +#47475 = ORIENTED_EDGE('',*,*,#44542,.T.); +#47476 = ORIENTED_EDGE('',*,*,#44525,.T.); +#47477 = ORIENTED_EDGE('',*,*,#44501,.T.); +#47478 = ORIENTED_EDGE('',*,*,#44470,.T.); +#47479 = PLANE('',#47480); +#47480 = AXIS2_PLACEMENT_3D('',#47481,#47482,#47483); +#47481 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47482 = DIRECTION('',(0.,0.,1.)); +#47483 = DIRECTION('',(1.,0.,-0.)); +#47484 = ADVANCED_FACE('',(#47485),#47491,.F.); +#47485 = FACE_BOUND('',#47486,.F.); +#47486 = EDGE_LOOP('',(#47487,#47488,#47489,#47490)); +#47487 = ORIENTED_EDGE('',*,*,#44566,.T.); +#47488 = ORIENTED_EDGE('',*,*,#44590,.T.); +#47489 = ORIENTED_EDGE('',*,*,#44614,.T.); +#47490 = ORIENTED_EDGE('',*,*,#44638,.T.); +#47491 = PLANE('',#47492); +#47492 = AXIS2_PLACEMENT_3D('',#47493,#47494,#47495); +#47493 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47494 = DIRECTION('',(0.,0.,1.)); +#47495 = DIRECTION('',(1.,0.,-0.)); +#47496 = ADVANCED_FACE('',(#47497),#47503,.F.); +#47497 = FACE_BOUND('',#47498,.F.); +#47498 = EDGE_LOOP('',(#47499,#47500,#47501,#47502)); +#47499 = ORIENTED_EDGE('',*,*,#44662,.T.); +#47500 = ORIENTED_EDGE('',*,*,#44686,.T.); +#47501 = ORIENTED_EDGE('',*,*,#44710,.T.); +#47502 = ORIENTED_EDGE('',*,*,#44734,.T.); +#47503 = PLANE('',#47504); +#47504 = AXIS2_PLACEMENT_3D('',#47505,#47506,#47507); +#47505 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47506 = DIRECTION('',(0.,0.,1.)); +#47507 = DIRECTION('',(1.,0.,-0.)); +#47508 = ADVANCED_FACE('',(#47509),#47515,.F.); +#47509 = FACE_BOUND('',#47510,.F.); +#47510 = EDGE_LOOP('',(#47511,#47512,#47513,#47514)); +#47511 = ORIENTED_EDGE('',*,*,#44758,.T.); +#47512 = ORIENTED_EDGE('',*,*,#44782,.T.); +#47513 = ORIENTED_EDGE('',*,*,#44806,.T.); +#47514 = ORIENTED_EDGE('',*,*,#44830,.T.); +#47515 = PLANE('',#47516); +#47516 = AXIS2_PLACEMENT_3D('',#47517,#47518,#47519); +#47517 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47518 = DIRECTION('',(0.,0.,1.)); +#47519 = DIRECTION('',(1.,0.,-0.)); +#47520 = ADVANCED_FACE('',(#47521),#47527,.F.); +#47521 = FACE_BOUND('',#47522,.F.); +#47522 = EDGE_LOOP('',(#47523,#47524,#47525,#47526)); +#47523 = ORIENTED_EDGE('',*,*,#44854,.T.); +#47524 = ORIENTED_EDGE('',*,*,#44878,.T.); +#47525 = ORIENTED_EDGE('',*,*,#44902,.T.); +#47526 = ORIENTED_EDGE('',*,*,#44926,.T.); +#47527 = PLANE('',#47528); +#47528 = AXIS2_PLACEMENT_3D('',#47529,#47530,#47531); +#47529 = CARTESIAN_POINT('',(-1.5,-2.46,0.4)); +#47530 = DIRECTION('',(0.,0.,1.)); +#47531 = DIRECTION('',(1.,0.,-0.)); +#47532 = MANIFOLD_SOLID_BREP('',#47533); +#47533 = CLOSED_SHELL('',(#47534,#47574,#47641,#47666,#47691,#47724, + #47748,#47772,#47797,#47822,#47839,#47856,#47873,#47915,#47933, + #47951,#47968,#47985,#47997,#48022)); +#47534 = ADVANCED_FACE('',(#47535),#47569,.T.); +#47535 = FACE_BOUND('',#47536,.T.); +#47536 = EDGE_LOOP('',(#47537,#47547,#47555,#47563)); +#47537 = ORIENTED_EDGE('',*,*,#47538,.F.); +#47538 = EDGE_CURVE('',#47539,#47541,#47543,.T.); +#47539 = VERTEX_POINT('',#47540); +#47540 = CARTESIAN_POINT('',(-7.55,5.9,0.8)); +#47541 = VERTEX_POINT('',#47542); +#47542 = CARTESIAN_POINT('',(7.75,5.9,0.8)); +#47543 = LINE('',#47544,#47545); +#47544 = CARTESIAN_POINT('',(-7.8,5.9,0.8)); +#47545 = VECTOR('',#47546,1.); +#47546 = DIRECTION('',(1.,0.,0.)); +#47547 = ORIENTED_EDGE('',*,*,#47548,.T.); +#47548 = EDGE_CURVE('',#47539,#47549,#47551,.T.); +#47549 = VERTEX_POINT('',#47550); +#47550 = CARTESIAN_POINT('',(-7.55,5.9,2.85)); +#47551 = LINE('',#47552,#47553); +#47552 = CARTESIAN_POINT('',(-7.55,5.9,0.8)); +#47553 = VECTOR('',#47554,1.); +#47554 = DIRECTION('',(0.,0.,1.)); +#47555 = ORIENTED_EDGE('',*,*,#47556,.T.); +#47556 = EDGE_CURVE('',#47549,#47557,#47559,.T.); +#47557 = VERTEX_POINT('',#47558); +#47558 = CARTESIAN_POINT('',(7.75,5.9,2.85)); +#47559 = LINE('',#47560,#47561); +#47560 = CARTESIAN_POINT('',(-7.8,5.9,2.85)); +#47561 = VECTOR('',#47562,1.); +#47562 = DIRECTION('',(1.,0.,0.)); +#47563 = ORIENTED_EDGE('',*,*,#47564,.F.); +#47564 = EDGE_CURVE('',#47541,#47557,#47565,.T.); +#47565 = LINE('',#47566,#47567); +#47566 = CARTESIAN_POINT('',(7.75,5.9,0.8)); +#47567 = VECTOR('',#47568,1.); +#47568 = DIRECTION('',(0.,0.,1.)); +#47569 = PLANE('',#47570); +#47570 = AXIS2_PLACEMENT_3D('',#47571,#47572,#47573); +#47571 = CARTESIAN_POINT('',(-7.8,5.9,0.8)); +#47572 = DIRECTION('',(0.,1.,0.)); +#47573 = DIRECTION('',(1.,0.,0.)); +#47574 = ADVANCED_FACE('',(#47575),#47636,.F.); +#47575 = FACE_BOUND('',#47576,.F.); +#47576 = EDGE_LOOP('',(#47577,#47578,#47587,#47595,#47604,#47612,#47621, + #47629)); +#47577 = ORIENTED_EDGE('',*,*,#47538,.F.); +#47578 = ORIENTED_EDGE('',*,*,#47579,.T.); +#47579 = EDGE_CURVE('',#47539,#47580,#47582,.T.); +#47580 = VERTEX_POINT('',#47581); +#47581 = CARTESIAN_POINT('',(-7.8,5.65,0.8)); +#47582 = CIRCLE('',#47583,0.25); +#47583 = AXIS2_PLACEMENT_3D('',#47584,#47585,#47586); +#47584 = CARTESIAN_POINT('',(-7.55,5.65,0.8)); +#47585 = DIRECTION('',(-0.,0.,1.)); +#47586 = DIRECTION('',(0.,-1.,0.)); +#47587 = ORIENTED_EDGE('',*,*,#47588,.F.); +#47588 = EDGE_CURVE('',#47589,#47580,#47591,.T.); +#47589 = VERTEX_POINT('',#47590); +#47590 = CARTESIAN_POINT('',(-7.8,-11.45,0.8)); +#47591 = LINE('',#47592,#47593); +#47592 = CARTESIAN_POINT('',(-7.8,-11.7,0.8)); +#47593 = VECTOR('',#47594,1.); +#47594 = DIRECTION('',(0.,1.,0.)); +#47595 = ORIENTED_EDGE('',*,*,#47596,.F.); +#47596 = EDGE_CURVE('',#47597,#47589,#47599,.T.); +#47597 = VERTEX_POINT('',#47598); +#47598 = CARTESIAN_POINT('',(-7.55,-11.7,0.8)); +#47599 = CIRCLE('',#47600,0.25); +#47600 = AXIS2_PLACEMENT_3D('',#47601,#47602,#47603); +#47601 = CARTESIAN_POINT('',(-7.55,-11.45,0.8)); +#47602 = DIRECTION('',(-0.,-0.,-1.)); +#47603 = DIRECTION('',(0.,-1.,0.)); +#47604 = ORIENTED_EDGE('',*,*,#47605,.F.); +#47605 = EDGE_CURVE('',#47606,#47597,#47608,.T.); +#47606 = VERTEX_POINT('',#47607); +#47607 = CARTESIAN_POINT('',(7.75,-11.7,0.8)); +#47608 = LINE('',#47609,#47610); +#47609 = CARTESIAN_POINT('',(8.,-11.7,0.8)); +#47610 = VECTOR('',#47611,1.); +#47611 = DIRECTION('',(-1.,0.,0.)); +#47612 = ORIENTED_EDGE('',*,*,#47613,.F.); +#47613 = EDGE_CURVE('',#47614,#47606,#47616,.T.); +#47614 = VERTEX_POINT('',#47615); +#47615 = CARTESIAN_POINT('',(8.,-11.45,0.8)); +#47616 = CIRCLE('',#47617,0.25); +#47617 = AXIS2_PLACEMENT_3D('',#47618,#47619,#47620); +#47618 = CARTESIAN_POINT('',(7.75,-11.45,0.8)); +#47619 = DIRECTION('',(-0.,-0.,-1.)); +#47620 = DIRECTION('',(0.,-1.,0.)); +#47621 = ORIENTED_EDGE('',*,*,#47622,.F.); +#47622 = EDGE_CURVE('',#47623,#47614,#47625,.T.); +#47623 = VERTEX_POINT('',#47624); +#47624 = CARTESIAN_POINT('',(8.,5.65,0.8)); +#47625 = LINE('',#47626,#47627); +#47626 = CARTESIAN_POINT('',(8.,5.9,0.8)); +#47627 = VECTOR('',#47628,1.); +#47628 = DIRECTION('',(0.,-1.,0.)); +#47629 = ORIENTED_EDGE('',*,*,#47630,.F.); +#47630 = EDGE_CURVE('',#47541,#47623,#47631,.T.); +#47631 = CIRCLE('',#47632,0.25); +#47632 = AXIS2_PLACEMENT_3D('',#47633,#47634,#47635); +#47633 = CARTESIAN_POINT('',(7.75,5.65,0.8)); +#47634 = DIRECTION('',(-0.,-0.,-1.)); +#47635 = DIRECTION('',(0.,-1.,0.)); +#47636 = PLANE('',#47637); +#47637 = AXIS2_PLACEMENT_3D('',#47638,#47639,#47640); +#47638 = CARTESIAN_POINT('',(0.1,-2.9,0.8)); +#47639 = DIRECTION('',(0.,0.,1.)); +#47640 = DIRECTION('',(1.,0.,-0.)); +#47641 = ADVANCED_FACE('',(#47642),#47661,.T.); +#47642 = FACE_BOUND('',#47643,.T.); +#47643 = EDGE_LOOP('',(#47644,#47645,#47653,#47660)); +#47644 = ORIENTED_EDGE('',*,*,#47579,.T.); +#47645 = ORIENTED_EDGE('',*,*,#47646,.T.); +#47646 = EDGE_CURVE('',#47580,#47647,#47649,.T.); +#47647 = VERTEX_POINT('',#47648); +#47648 = CARTESIAN_POINT('',(-7.8,5.65,2.85)); +#47649 = LINE('',#47650,#47651); +#47650 = CARTESIAN_POINT('',(-7.8,5.65,0.8)); +#47651 = VECTOR('',#47652,1.); +#47652 = DIRECTION('',(0.,0.,1.)); +#47653 = ORIENTED_EDGE('',*,*,#47654,.T.); +#47654 = EDGE_CURVE('',#47647,#47549,#47655,.T.); +#47655 = CIRCLE('',#47656,0.25); +#47656 = AXIS2_PLACEMENT_3D('',#47657,#47658,#47659); +#47657 = CARTESIAN_POINT('',(-7.55,5.65,2.85)); +#47658 = DIRECTION('',(0.,0.,-1.)); +#47659 = DIRECTION('',(0.,1.,0.)); +#47660 = ORIENTED_EDGE('',*,*,#47548,.F.); +#47661 = CYLINDRICAL_SURFACE('',#47662,0.25); +#47662 = AXIS2_PLACEMENT_3D('',#47663,#47664,#47665); +#47663 = CARTESIAN_POINT('',(-7.55,5.65,0.8)); +#47664 = DIRECTION('',(0.,0.,1.)); +#47665 = DIRECTION('',(0.,1.,0.)); +#47666 = ADVANCED_FACE('',(#47667),#47686,.T.); +#47667 = FACE_BOUND('',#47668,.T.); +#47668 = EDGE_LOOP('',(#47669,#47670,#47679,#47685)); +#47669 = ORIENTED_EDGE('',*,*,#47564,.T.); +#47670 = ORIENTED_EDGE('',*,*,#47671,.T.); +#47671 = EDGE_CURVE('',#47557,#47672,#47674,.T.); +#47672 = VERTEX_POINT('',#47673); +#47673 = CARTESIAN_POINT('',(8.,5.65,2.85)); +#47674 = CIRCLE('',#47675,0.25); +#47675 = AXIS2_PLACEMENT_3D('',#47676,#47677,#47678); +#47676 = CARTESIAN_POINT('',(7.75,5.65,2.85)); +#47677 = DIRECTION('',(0.,0.,-1.)); +#47678 = DIRECTION('',(1.,0.,0.)); +#47679 = ORIENTED_EDGE('',*,*,#47680,.F.); +#47680 = EDGE_CURVE('',#47623,#47672,#47681,.T.); +#47681 = LINE('',#47682,#47683); +#47682 = CARTESIAN_POINT('',(8.,5.65,0.8)); +#47683 = VECTOR('',#47684,1.); +#47684 = DIRECTION('',(0.,0.,1.)); +#47685 = ORIENTED_EDGE('',*,*,#47630,.F.); +#47686 = CYLINDRICAL_SURFACE('',#47687,0.25); +#47687 = AXIS2_PLACEMENT_3D('',#47688,#47689,#47690); +#47688 = CARTESIAN_POINT('',(7.75,5.65,0.8)); +#47689 = DIRECTION('',(0.,0.,1.)); +#47690 = DIRECTION('',(0.,1.,0.)); +#47691 = ADVANCED_FACE('',(#47692),#47719,.T.); +#47692 = FACE_BOUND('',#47693,.T.); +#47693 = EDGE_LOOP('',(#47694,#47695,#47704,#47712)); +#47694 = ORIENTED_EDGE('',*,*,#47556,.F.); +#47695 = ORIENTED_EDGE('',*,*,#47696,.T.); +#47696 = EDGE_CURVE('',#47549,#47697,#47699,.T.); +#47697 = VERTEX_POINT('',#47698); +#47698 = CARTESIAN_POINT('',(-7.55,5.65,3.1)); +#47699 = CIRCLE('',#47700,0.25); +#47700 = AXIS2_PLACEMENT_3D('',#47701,#47702,#47703); +#47701 = CARTESIAN_POINT('',(-7.55,5.65,2.85)); +#47702 = DIRECTION('',(1.,0.,0.)); +#47703 = DIRECTION('',(-0.,1.,0.)); +#47704 = ORIENTED_EDGE('',*,*,#47705,.T.); +#47705 = EDGE_CURVE('',#47697,#47706,#47708,.T.); +#47706 = VERTEX_POINT('',#47707); +#47707 = CARTESIAN_POINT('',(7.75,5.65,3.1)); +#47708 = LINE('',#47709,#47710); +#47709 = CARTESIAN_POINT('',(-7.8,5.65,3.1)); +#47710 = VECTOR('',#47711,1.); +#47711 = DIRECTION('',(1.,0.,0.)); +#47712 = ORIENTED_EDGE('',*,*,#47713,.F.); +#47713 = EDGE_CURVE('',#47557,#47706,#47714,.T.); +#47714 = CIRCLE('',#47715,0.25); +#47715 = AXIS2_PLACEMENT_3D('',#47716,#47717,#47718); +#47716 = CARTESIAN_POINT('',(7.75,5.65,2.85)); +#47717 = DIRECTION('',(1.,0.,-6.E-17)); +#47718 = DIRECTION('',(6.E-17,0.,1.)); +#47719 = CYLINDRICAL_SURFACE('',#47720,0.25); +#47720 = AXIS2_PLACEMENT_3D('',#47721,#47722,#47723); +#47721 = CARTESIAN_POINT('',(-7.8,5.65,2.85)); +#47722 = DIRECTION('',(1.,0.,0.)); +#47723 = DIRECTION('',(-0.,1.,0.)); +#47724 = ADVANCED_FACE('',(#47725),#47743,.T.); +#47725 = FACE_BOUND('',#47726,.T.); +#47726 = EDGE_LOOP('',(#47727,#47728,#47736,#47742)); +#47727 = ORIENTED_EDGE('',*,*,#47588,.F.); +#47728 = ORIENTED_EDGE('',*,*,#47729,.T.); +#47729 = EDGE_CURVE('',#47589,#47730,#47732,.T.); +#47730 = VERTEX_POINT('',#47731); +#47731 = CARTESIAN_POINT('',(-7.8,-11.45,2.85)); +#47732 = LINE('',#47733,#47734); +#47733 = CARTESIAN_POINT('',(-7.8,-11.45,0.8)); +#47734 = VECTOR('',#47735,1.); +#47735 = DIRECTION('',(0.,0.,1.)); +#47736 = ORIENTED_EDGE('',*,*,#47737,.T.); +#47737 = EDGE_CURVE('',#47730,#47647,#47738,.T.); +#47738 = LINE('',#47739,#47740); +#47739 = CARTESIAN_POINT('',(-7.8,-11.7,2.85)); +#47740 = VECTOR('',#47741,1.); +#47741 = DIRECTION('',(0.,1.,0.)); +#47742 = ORIENTED_EDGE('',*,*,#47646,.F.); +#47743 = PLANE('',#47744); +#47744 = AXIS2_PLACEMENT_3D('',#47745,#47746,#47747); +#47745 = CARTESIAN_POINT('',(-7.8,-11.7,0.8)); +#47746 = DIRECTION('',(-1.,0.,0.)); +#47747 = DIRECTION('',(0.,1.,0.)); +#47748 = ADVANCED_FACE('',(#47749),#47767,.T.); +#47749 = FACE_BOUND('',#47750,.T.); +#47750 = EDGE_LOOP('',(#47751,#47752,#47753,#47761)); +#47751 = ORIENTED_EDGE('',*,*,#47622,.F.); +#47752 = ORIENTED_EDGE('',*,*,#47680,.T.); +#47753 = ORIENTED_EDGE('',*,*,#47754,.T.); +#47754 = EDGE_CURVE('',#47672,#47755,#47757,.T.); +#47755 = VERTEX_POINT('',#47756); +#47756 = CARTESIAN_POINT('',(8.,-11.45,2.85)); +#47757 = LINE('',#47758,#47759); +#47758 = CARTESIAN_POINT('',(8.,5.9,2.85)); +#47759 = VECTOR('',#47760,1.); +#47760 = DIRECTION('',(0.,-1.,0.)); +#47761 = ORIENTED_EDGE('',*,*,#47762,.F.); +#47762 = EDGE_CURVE('',#47614,#47755,#47763,.T.); +#47763 = LINE('',#47764,#47765); +#47764 = CARTESIAN_POINT('',(8.,-11.45,0.8)); +#47765 = VECTOR('',#47766,1.); +#47766 = DIRECTION('',(0.,0.,1.)); +#47767 = PLANE('',#47768); +#47768 = AXIS2_PLACEMENT_3D('',#47769,#47770,#47771); +#47769 = CARTESIAN_POINT('',(8.,5.9,0.8)); +#47770 = DIRECTION('',(1.,0.,0.)); +#47771 = DIRECTION('',(0.,-1.,0.)); +#47772 = ADVANCED_FACE('',(#47773),#47792,.T.); +#47773 = FACE_BOUND('',#47774,.T.); +#47774 = EDGE_LOOP('',(#47775,#47783,#47790,#47791)); +#47775 = ORIENTED_EDGE('',*,*,#47776,.T.); +#47776 = EDGE_CURVE('',#47597,#47777,#47779,.T.); +#47777 = VERTEX_POINT('',#47778); +#47778 = CARTESIAN_POINT('',(-7.55,-11.7,2.85)); +#47779 = LINE('',#47780,#47781); +#47780 = CARTESIAN_POINT('',(-7.55,-11.7,0.8)); +#47781 = VECTOR('',#47782,1.); +#47782 = DIRECTION('',(0.,0.,1.)); +#47783 = ORIENTED_EDGE('',*,*,#47784,.T.); +#47784 = EDGE_CURVE('',#47777,#47730,#47785,.T.); +#47785 = CIRCLE('',#47786,0.25); +#47786 = AXIS2_PLACEMENT_3D('',#47787,#47788,#47789); +#47787 = CARTESIAN_POINT('',(-7.55,-11.45,2.85)); +#47788 = DIRECTION('',(-0.,-0.,-1.)); +#47789 = DIRECTION('',(0.,-1.,0.)); +#47790 = ORIENTED_EDGE('',*,*,#47729,.F.); +#47791 = ORIENTED_EDGE('',*,*,#47596,.F.); +#47792 = CYLINDRICAL_SURFACE('',#47793,0.25); +#47793 = AXIS2_PLACEMENT_3D('',#47794,#47795,#47796); +#47794 = CARTESIAN_POINT('',(-7.55,-11.45,0.8)); +#47795 = DIRECTION('',(0.,0.,1.)); +#47796 = DIRECTION('',(0.,-1.,0.)); +#47797 = ADVANCED_FACE('',(#47798),#47817,.T.); +#47798 = FACE_BOUND('',#47799,.T.); +#47799 = EDGE_LOOP('',(#47800,#47801,#47810,#47816)); +#47800 = ORIENTED_EDGE('',*,*,#47762,.T.); +#47801 = ORIENTED_EDGE('',*,*,#47802,.F.); +#47802 = EDGE_CURVE('',#47803,#47755,#47805,.T.); +#47803 = VERTEX_POINT('',#47804); +#47804 = CARTESIAN_POINT('',(7.75,-11.7,2.85)); +#47805 = CIRCLE('',#47806,0.25); +#47806 = AXIS2_PLACEMENT_3D('',#47807,#47808,#47809); +#47807 = CARTESIAN_POINT('',(7.75,-11.45,2.85)); +#47808 = DIRECTION('',(-0.,0.,1.)); +#47809 = DIRECTION('',(0.,-1.,0.)); +#47810 = ORIENTED_EDGE('',*,*,#47811,.F.); +#47811 = EDGE_CURVE('',#47606,#47803,#47812,.T.); +#47812 = LINE('',#47813,#47814); +#47813 = CARTESIAN_POINT('',(7.75,-11.7,0.8)); +#47814 = VECTOR('',#47815,1.); +#47815 = DIRECTION('',(0.,0.,1.)); +#47816 = ORIENTED_EDGE('',*,*,#47613,.F.); +#47817 = CYLINDRICAL_SURFACE('',#47818,0.25); +#47818 = AXIS2_PLACEMENT_3D('',#47819,#47820,#47821); +#47819 = CARTESIAN_POINT('',(7.75,-11.45,0.8)); +#47820 = DIRECTION('',(0.,0.,1.)); +#47821 = DIRECTION('',(1.,0.,-0.)); +#47822 = ADVANCED_FACE('',(#47823),#47834,.T.); +#47823 = FACE_BOUND('',#47824,.T.); +#47824 = EDGE_LOOP('',(#47825,#47826,#47827,#47833)); +#47825 = ORIENTED_EDGE('',*,*,#47605,.F.); +#47826 = ORIENTED_EDGE('',*,*,#47811,.T.); +#47827 = ORIENTED_EDGE('',*,*,#47828,.T.); +#47828 = EDGE_CURVE('',#47803,#47777,#47829,.T.); +#47829 = LINE('',#47830,#47831); +#47830 = CARTESIAN_POINT('',(8.,-11.7,2.85)); +#47831 = VECTOR('',#47832,1.); +#47832 = DIRECTION('',(-1.,0.,0.)); +#47833 = ORIENTED_EDGE('',*,*,#47776,.F.); +#47834 = PLANE('',#47835); +#47835 = AXIS2_PLACEMENT_3D('',#47836,#47837,#47838); +#47836 = CARTESIAN_POINT('',(8.,-11.7,0.8)); +#47837 = DIRECTION('',(0.,-1.,0.)); +#47838 = DIRECTION('',(-1.,0.,0.)); +#47839 = ADVANCED_FACE('',(#47840),#47851,.T.); +#47840 = FACE_BOUND('',#47841,.T.); +#47841 = EDGE_LOOP('',(#47842,#47843,#47850)); +#47842 = ORIENTED_EDGE('',*,*,#47654,.F.); +#47843 = ORIENTED_EDGE('',*,*,#47844,.T.); +#47844 = EDGE_CURVE('',#47647,#47697,#47845,.T.); +#47845 = CIRCLE('',#47846,0.25); +#47846 = AXIS2_PLACEMENT_3D('',#47847,#47848,#47849); +#47847 = CARTESIAN_POINT('',(-7.55,5.65,2.85)); +#47848 = DIRECTION('',(0.,1.,-6.E-17)); +#47849 = DIRECTION('',(0.,6.E-17,1.)); +#47850 = ORIENTED_EDGE('',*,*,#47696,.F.); +#47851 = SPHERICAL_SURFACE('',#47852,0.25); +#47852 = AXIS2_PLACEMENT_3D('',#47853,#47854,#47855); +#47853 = CARTESIAN_POINT('',(-7.55,5.65,2.85)); +#47854 = DIRECTION('',(1.,0.,0.)); +#47855 = DIRECTION('',(-0.,1.,0.)); +#47856 = ADVANCED_FACE('',(#47857),#47868,.T.); +#47857 = FACE_BOUND('',#47858,.T.); +#47858 = EDGE_LOOP('',(#47859,#47860,#47861)); +#47859 = ORIENTED_EDGE('',*,*,#47671,.F.); +#47860 = ORIENTED_EDGE('',*,*,#47713,.T.); +#47861 = ORIENTED_EDGE('',*,*,#47862,.F.); +#47862 = EDGE_CURVE('',#47672,#47706,#47863,.T.); +#47863 = CIRCLE('',#47864,0.25); +#47864 = AXIS2_PLACEMENT_3D('',#47865,#47866,#47867); +#47865 = CARTESIAN_POINT('',(7.75,5.65,2.85)); +#47866 = DIRECTION('',(0.,-1.,0.)); +#47867 = DIRECTION('',(1.,0.,0.)); +#47868 = SPHERICAL_SURFACE('',#47869,0.25); +#47869 = AXIS2_PLACEMENT_3D('',#47870,#47871,#47872); +#47870 = CARTESIAN_POINT('',(7.75,5.65,2.85)); +#47871 = DIRECTION('',(0.,-1.,0.)); +#47872 = DIRECTION('',(1.,0.,0.)); +#47873 = ADVANCED_FACE('',(#47874,#47899),#47910,.T.); +#47874 = FACE_BOUND('',#47875,.T.); +#47875 = EDGE_LOOP('',(#47876,#47886,#47892,#47893)); +#47876 = ORIENTED_EDGE('',*,*,#47877,.F.); +#47877 = EDGE_CURVE('',#47878,#47880,#47882,.T.); +#47878 = VERTEX_POINT('',#47879); +#47879 = CARTESIAN_POINT('',(7.75,-11.45,3.1)); +#47880 = VERTEX_POINT('',#47881); +#47881 = CARTESIAN_POINT('',(-7.55,-11.45,3.1)); +#47882 = LINE('',#47883,#47884); +#47883 = CARTESIAN_POINT('',(8.,-11.45,3.1)); +#47884 = VECTOR('',#47885,1.); +#47885 = DIRECTION('',(-1.,0.,0.)); +#47886 = ORIENTED_EDGE('',*,*,#47887,.F.); +#47887 = EDGE_CURVE('',#47706,#47878,#47888,.T.); +#47888 = LINE('',#47889,#47890); +#47889 = CARTESIAN_POINT('',(7.75,5.9,3.1)); +#47890 = VECTOR('',#47891,1.); +#47891 = DIRECTION('',(0.,-1.,0.)); +#47892 = ORIENTED_EDGE('',*,*,#47705,.F.); +#47893 = ORIENTED_EDGE('',*,*,#47894,.F.); +#47894 = EDGE_CURVE('',#47880,#47697,#47895,.T.); +#47895 = LINE('',#47896,#47897); +#47896 = CARTESIAN_POINT('',(-7.55,-11.7,3.1)); +#47897 = VECTOR('',#47898,1.); +#47898 = DIRECTION('',(0.,1.,0.)); +#47899 = FACE_BOUND('',#47900,.T.); +#47900 = EDGE_LOOP('',(#47901)); +#47901 = ORIENTED_EDGE('',*,*,#47902,.F.); +#47902 = EDGE_CURVE('',#47903,#47903,#47905,.T.); +#47903 = VERTEX_POINT('',#47904); +#47904 = CARTESIAN_POINT('',(-5.35,-9.6,3.1)); +#47905 = CIRCLE('',#47906,0.25); +#47906 = AXIS2_PLACEMENT_3D('',#47907,#47908,#47909); +#47907 = CARTESIAN_POINT('',(-5.6,-9.6,3.1)); +#47908 = DIRECTION('',(0.,0.,1.)); +#47909 = DIRECTION('',(1.,0.,-0.)); +#47910 = PLANE('',#47911); +#47911 = AXIS2_PLACEMENT_3D('',#47912,#47913,#47914); +#47912 = CARTESIAN_POINT('',(0.1,-2.9,3.1)); +#47913 = DIRECTION('',(0.,0.,1.)); +#47914 = DIRECTION('',(1.,0.,-0.)); +#47915 = ADVANCED_FACE('',(#47916),#47928,.T.); +#47916 = FACE_BOUND('',#47917,.T.); +#47917 = EDGE_LOOP('',(#47918,#47925,#47926,#47927)); +#47918 = ORIENTED_EDGE('',*,*,#47919,.F.); +#47919 = EDGE_CURVE('',#47880,#47730,#47920,.T.); +#47920 = CIRCLE('',#47921,0.25); +#47921 = AXIS2_PLACEMENT_3D('',#47922,#47923,#47924); +#47922 = CARTESIAN_POINT('',(-7.55,-11.45,2.85)); +#47923 = DIRECTION('',(6.E-17,-1.,0.)); +#47924 = DIRECTION('',(-1.,-6.E-17,0.)); +#47925 = ORIENTED_EDGE('',*,*,#47894,.T.); +#47926 = ORIENTED_EDGE('',*,*,#47844,.F.); +#47927 = ORIENTED_EDGE('',*,*,#47737,.F.); +#47928 = CYLINDRICAL_SURFACE('',#47929,0.25); +#47929 = AXIS2_PLACEMENT_3D('',#47930,#47931,#47932); +#47930 = CARTESIAN_POINT('',(-7.55,-11.7,2.85)); +#47931 = DIRECTION('',(0.,1.,0.)); +#47932 = DIRECTION('',(-1.,0.,0.)); +#47933 = ADVANCED_FACE('',(#47934),#47946,.T.); +#47934 = FACE_BOUND('',#47935,.T.); +#47935 = EDGE_LOOP('',(#47936,#47937,#47938,#47939)); +#47936 = ORIENTED_EDGE('',*,*,#47754,.F.); +#47937 = ORIENTED_EDGE('',*,*,#47862,.T.); +#47938 = ORIENTED_EDGE('',*,*,#47887,.T.); +#47939 = ORIENTED_EDGE('',*,*,#47940,.T.); +#47940 = EDGE_CURVE('',#47878,#47755,#47941,.T.); +#47941 = CIRCLE('',#47942,0.25); +#47942 = AXIS2_PLACEMENT_3D('',#47943,#47944,#47945); +#47943 = CARTESIAN_POINT('',(7.75,-11.45,2.85)); +#47944 = DIRECTION('',(6.E-17,1.,0.)); +#47945 = DIRECTION('',(1.,-6.E-17,0.)); +#47946 = CYLINDRICAL_SURFACE('',#47947,0.25); +#47947 = AXIS2_PLACEMENT_3D('',#47948,#47949,#47950); +#47948 = CARTESIAN_POINT('',(7.75,5.9,2.85)); +#47949 = DIRECTION('',(0.,-1.,0.)); +#47950 = DIRECTION('',(1.,0.,0.)); +#47951 = ADVANCED_FACE('',(#47952),#47963,.T.); +#47952 = FACE_BOUND('',#47953,.T.); +#47953 = EDGE_LOOP('',(#47954,#47961,#47962)); +#47954 = ORIENTED_EDGE('',*,*,#47955,.F.); +#47955 = EDGE_CURVE('',#47880,#47777,#47956,.T.); +#47956 = CIRCLE('',#47957,0.25); +#47957 = AXIS2_PLACEMENT_3D('',#47958,#47959,#47960); +#47958 = CARTESIAN_POINT('',(-7.55,-11.45,2.85)); +#47959 = DIRECTION('',(1.,0.,0.)); +#47960 = DIRECTION('',(0.,-1.,0.)); +#47961 = ORIENTED_EDGE('',*,*,#47919,.T.); +#47962 = ORIENTED_EDGE('',*,*,#47784,.F.); +#47963 = SPHERICAL_SURFACE('',#47964,0.25); +#47964 = AXIS2_PLACEMENT_3D('',#47965,#47966,#47967); +#47965 = CARTESIAN_POINT('',(-7.55,-11.45,2.85)); +#47966 = DIRECTION('',(-0.,-0.,-1.)); +#47967 = DIRECTION('',(0.,-1.,0.)); +#47968 = ADVANCED_FACE('',(#47969),#47980,.T.); +#47969 = FACE_BOUND('',#47970,.T.); +#47970 = EDGE_LOOP('',(#47971,#47972,#47973)); +#47971 = ORIENTED_EDGE('',*,*,#47802,.T.); +#47972 = ORIENTED_EDGE('',*,*,#47940,.F.); +#47973 = ORIENTED_EDGE('',*,*,#47974,.T.); +#47974 = EDGE_CURVE('',#47878,#47803,#47975,.T.); +#47975 = CIRCLE('',#47976,0.25); +#47976 = AXIS2_PLACEMENT_3D('',#47977,#47978,#47979); +#47977 = CARTESIAN_POINT('',(7.75,-11.45,2.85)); +#47978 = DIRECTION('',(1.,0.,0.)); +#47979 = DIRECTION('',(0.,-1.,0.)); +#47980 = SPHERICAL_SURFACE('',#47981,0.25); +#47981 = AXIS2_PLACEMENT_3D('',#47982,#47983,#47984); +#47982 = CARTESIAN_POINT('',(7.75,-11.45,2.85)); +#47983 = DIRECTION('',(-0.,-0.,-1.)); +#47984 = DIRECTION('',(0.,-1.,0.)); +#47985 = ADVANCED_FACE('',(#47986),#47992,.T.); +#47986 = FACE_BOUND('',#47987,.T.); +#47987 = EDGE_LOOP('',(#47988,#47989,#47990,#47991)); +#47988 = ORIENTED_EDGE('',*,*,#47974,.F.); +#47989 = ORIENTED_EDGE('',*,*,#47877,.T.); +#47990 = ORIENTED_EDGE('',*,*,#47955,.T.); +#47991 = ORIENTED_EDGE('',*,*,#47828,.F.); +#47992 = CYLINDRICAL_SURFACE('',#47993,0.25); +#47993 = AXIS2_PLACEMENT_3D('',#47994,#47995,#47996); +#47994 = CARTESIAN_POINT('',(8.,-11.45,2.85)); +#47995 = DIRECTION('',(-1.,0.,0.)); +#47996 = DIRECTION('',(0.,-1.,0.)); +#47997 = ADVANCED_FACE('',(#47998),#48017,.F.); +#47998 = FACE_BOUND('',#47999,.F.); +#47999 = EDGE_LOOP('',(#48000,#48008,#48015,#48016)); +#48000 = ORIENTED_EDGE('',*,*,#48001,.T.); +#48001 = EDGE_CURVE('',#47903,#48002,#48004,.T.); +#48002 = VERTEX_POINT('',#48003); +#48003 = CARTESIAN_POINT('',(-5.35,-9.6,1.1)); +#48004 = LINE('',#48005,#48006); +#48005 = CARTESIAN_POINT('',(-5.35,-9.6,3.1)); +#48006 = VECTOR('',#48007,1.); +#48007 = DIRECTION('',(-0.,-0.,-1.)); +#48008 = ORIENTED_EDGE('',*,*,#48009,.T.); +#48009 = EDGE_CURVE('',#48002,#48002,#48010,.T.); +#48010 = CIRCLE('',#48011,0.25); +#48011 = AXIS2_PLACEMENT_3D('',#48012,#48013,#48014); +#48012 = CARTESIAN_POINT('',(-5.6,-9.6,1.1)); +#48013 = DIRECTION('',(0.,0.,1.)); +#48014 = DIRECTION('',(1.,0.,-0.)); +#48015 = ORIENTED_EDGE('',*,*,#48001,.F.); +#48016 = ORIENTED_EDGE('',*,*,#47902,.F.); +#48017 = CYLINDRICAL_SURFACE('',#48018,0.25); +#48018 = AXIS2_PLACEMENT_3D('',#48019,#48020,#48021); +#48019 = CARTESIAN_POINT('',(-5.6,-9.6,3.1)); +#48020 = DIRECTION('',(0.,0.,1.)); +#48021 = DIRECTION('',(1.,0.,-0.)); +#48022 = ADVANCED_FACE('',(#48023),#48026,.T.); +#48023 = FACE_BOUND('',#48024,.T.); +#48024 = EDGE_LOOP('',(#48025)); +#48025 = ORIENTED_EDGE('',*,*,#48009,.T.); +#48026 = PLANE('',#48027); +#48027 = AXIS2_PLACEMENT_3D('',#48028,#48029,#48030); +#48028 = CARTESIAN_POINT('',(-5.6,-9.6,1.1)); +#48029 = DIRECTION('',(0.,0.,1.)); +#48030 = DIRECTION('',(1.,0.,-0.)); +#48031 = MANIFOLD_SOLID_BREP('',#48032); +#48032 = CLOSED_SHELL('',(#48033,#48073,#48104,#48135,#48185,#48216, + #48249,#48266,#48290,#48321,#48338,#48367,#48391,#48417,#48441, + #48468,#48480,#48497)); +#48033 = ADVANCED_FACE('',(#48034),#48068,.T.); +#48034 = FACE_BOUND('',#48035,.F.); +#48035 = EDGE_LOOP('',(#48036,#48046,#48054,#48062)); +#48036 = ORIENTED_EDGE('',*,*,#48037,.T.); +#48037 = EDGE_CURVE('',#48038,#48040,#48042,.T.); +#48038 = VERTEX_POINT('',#48039); +#48039 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48040 = VERTEX_POINT('',#48041); +#48041 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48042 = LINE('',#48043,#48044); +#48043 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48044 = VECTOR('',#48045,1.); +#48045 = DIRECTION('',(0.,0.,1.)); +#48046 = ORIENTED_EDGE('',*,*,#48047,.T.); +#48047 = EDGE_CURVE('',#48040,#48048,#48050,.T.); +#48048 = VERTEX_POINT('',#48049); +#48049 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48050 = LINE('',#48051,#48052); +#48051 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48052 = VECTOR('',#48053,1.); +#48053 = DIRECTION('',(-1.,-0.,-0.)); +#48054 = ORIENTED_EDGE('',*,*,#48055,.F.); +#48055 = EDGE_CURVE('',#48056,#48048,#48058,.T.); +#48056 = VERTEX_POINT('',#48057); +#48057 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48058 = LINE('',#48059,#48060); +#48059 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48060 = VECTOR('',#48061,1.); +#48061 = DIRECTION('',(0.,0.,1.)); +#48062 = ORIENTED_EDGE('',*,*,#48063,.F.); +#48063 = EDGE_CURVE('',#48038,#48056,#48064,.T.); +#48064 = LINE('',#48065,#48066); +#48065 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48066 = VECTOR('',#48067,1.); +#48067 = DIRECTION('',(-1.,-0.,-0.)); +#48068 = PLANE('',#48069); +#48069 = AXIS2_PLACEMENT_3D('',#48070,#48071,#48072); +#48070 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48071 = DIRECTION('',(0.,1.,0.)); +#48072 = DIRECTION('',(1.,0.,0.)); +#48073 = ADVANCED_FACE('',(#48074),#48099,.F.); +#48074 = FACE_BOUND('',#48075,.T.); +#48075 = EDGE_LOOP('',(#48076,#48084,#48085,#48093)); +#48076 = ORIENTED_EDGE('',*,*,#48077,.F.); +#48077 = EDGE_CURVE('',#48038,#48078,#48080,.T.); +#48078 = VERTEX_POINT('',#48079); +#48079 = CARTESIAN_POINT('',(9.,4.265,0.)); +#48080 = LINE('',#48081,#48082); +#48081 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48082 = VECTOR('',#48083,1.); +#48083 = DIRECTION('',(-0.,-1.,-0.)); +#48084 = ORIENTED_EDGE('',*,*,#48037,.T.); +#48085 = ORIENTED_EDGE('',*,*,#48086,.T.); +#48086 = EDGE_CURVE('',#48040,#48087,#48089,.T.); +#48087 = VERTEX_POINT('',#48088); +#48088 = CARTESIAN_POINT('',(9.,4.265,0.4)); +#48089 = LINE('',#48090,#48091); +#48090 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48091 = VECTOR('',#48092,1.); +#48092 = DIRECTION('',(-0.,-1.,-0.)); +#48093 = ORIENTED_EDGE('',*,*,#48094,.F.); +#48094 = EDGE_CURVE('',#48078,#48087,#48095,.T.); +#48095 = LINE('',#48096,#48097); +#48096 = CARTESIAN_POINT('',(9.,4.265,0.8)); +#48097 = VECTOR('',#48098,1.); +#48098 = DIRECTION('',(0.,0.,1.)); +#48099 = PLANE('',#48100); +#48100 = AXIS2_PLACEMENT_3D('',#48101,#48102,#48103); +#48101 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48102 = DIRECTION('',(-1.,-0.,-0.)); +#48103 = DIRECTION('',(0.,1.,0.)); +#48104 = ADVANCED_FACE('',(#48105),#48130,.F.); +#48105 = FACE_BOUND('',#48106,.T.); +#48106 = EDGE_LOOP('',(#48107,#48115,#48123,#48129)); +#48107 = ORIENTED_EDGE('',*,*,#48108,.T.); +#48108 = EDGE_CURVE('',#48056,#48109,#48111,.T.); +#48109 = VERTEX_POINT('',#48110); +#48110 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#48111 = LINE('',#48112,#48113); +#48112 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48113 = VECTOR('',#48114,1.); +#48114 = DIRECTION('',(-1.,-0.,-0.)); +#48115 = ORIENTED_EDGE('',*,*,#48116,.T.); +#48116 = EDGE_CURVE('',#48109,#48117,#48119,.T.); +#48117 = VERTEX_POINT('',#48118); +#48118 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#48119 = LINE('',#48120,#48121); +#48120 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#48121 = VECTOR('',#48122,1.); +#48122 = DIRECTION('',(0.,0.,1.)); +#48123 = ORIENTED_EDGE('',*,*,#48124,.F.); +#48124 = EDGE_CURVE('',#48048,#48117,#48125,.T.); +#48125 = LINE('',#48126,#48127); +#48126 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48127 = VECTOR('',#48128,1.); +#48128 = DIRECTION('',(-1.,-0.,-0.)); +#48129 = ORIENTED_EDGE('',*,*,#48055,.F.); +#48130 = PLANE('',#48131); +#48131 = AXIS2_PLACEMENT_3D('',#48132,#48133,#48134); +#48132 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48133 = DIRECTION('',(-0.,-1.,-0.)); +#48134 = DIRECTION('',(0.,0.,-1.)); +#48135 = ADVANCED_FACE('',(#48136),#48180,.F.); +#48136 = FACE_BOUND('',#48137,.T.); +#48137 = EDGE_LOOP('',(#48138,#48139,#48140,#48149,#48158,#48166,#48174) + ); +#48138 = ORIENTED_EDGE('',*,*,#48063,.F.); +#48139 = ORIENTED_EDGE('',*,*,#48077,.T.); +#48140 = ORIENTED_EDGE('',*,*,#48141,.F.); +#48141 = EDGE_CURVE('',#48142,#48078,#48144,.T.); +#48142 = VERTEX_POINT('',#48143); +#48143 = CARTESIAN_POINT('',(8.725,3.99,0.)); +#48144 = CIRCLE('',#48145,0.275); +#48145 = AXIS2_PLACEMENT_3D('',#48146,#48147,#48148); +#48146 = CARTESIAN_POINT('',(9.,3.99,0.)); +#48147 = DIRECTION('',(0.,0.,-1.)); +#48148 = DIRECTION('',(-1.,-0.,-0.)); +#48149 = ORIENTED_EDGE('',*,*,#48150,.F.); +#48150 = EDGE_CURVE('',#48151,#48142,#48153,.T.); +#48151 = VERTEX_POINT('',#48152); +#48152 = CARTESIAN_POINT('',(9.,3.715,0.)); +#48153 = CIRCLE('',#48154,0.275); +#48154 = AXIS2_PLACEMENT_3D('',#48155,#48156,#48157); +#48155 = CARTESIAN_POINT('',(9.,3.99,0.)); +#48156 = DIRECTION('',(0.,0.,-1.)); +#48157 = DIRECTION('',(-1.,-0.,-0.)); +#48158 = ORIENTED_EDGE('',*,*,#48159,.T.); +#48159 = EDGE_CURVE('',#48151,#48160,#48162,.T.); +#48160 = VERTEX_POINT('',#48161); +#48161 = CARTESIAN_POINT('',(9.,3.54,0.)); +#48162 = LINE('',#48163,#48164); +#48163 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48164 = VECTOR('',#48165,1.); +#48165 = DIRECTION('',(-0.,-1.,-0.)); +#48166 = ORIENTED_EDGE('',*,*,#48167,.F.); +#48167 = EDGE_CURVE('',#48168,#48160,#48170,.T.); +#48168 = VERTEX_POINT('',#48169); +#48169 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48170 = LINE('',#48171,#48172); +#48171 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48172 = VECTOR('',#48173,1.); +#48173 = DIRECTION('',(1.,0.,0.)); +#48174 = ORIENTED_EDGE('',*,*,#48175,.F.); +#48175 = EDGE_CURVE('',#48056,#48168,#48176,.T.); +#48176 = LINE('',#48177,#48178); +#48177 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48178 = VECTOR('',#48179,1.); +#48179 = DIRECTION('',(-0.,-1.,-0.)); +#48180 = PLANE('',#48181); +#48181 = AXIS2_PLACEMENT_3D('',#48182,#48183,#48184); +#48182 = CARTESIAN_POINT('',(8.775,3.99,0.)); +#48183 = DIRECTION('',(0.,0.,1.)); +#48184 = DIRECTION('',(1.,0.,-0.)); +#48185 = ADVANCED_FACE('',(#48186),#48211,.T.); +#48186 = FACE_BOUND('',#48187,.F.); +#48187 = EDGE_LOOP('',(#48188,#48196,#48204,#48210)); +#48188 = ORIENTED_EDGE('',*,*,#48189,.T.); +#48189 = EDGE_CURVE('',#48040,#48190,#48192,.T.); +#48190 = VERTEX_POINT('',#48191); +#48191 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#48192 = LINE('',#48193,#48194); +#48193 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48194 = VECTOR('',#48195,1.); +#48195 = DIRECTION('',(0.,0.,1.)); +#48196 = ORIENTED_EDGE('',*,*,#48197,.T.); +#48197 = EDGE_CURVE('',#48190,#48198,#48200,.T.); +#48198 = VERTEX_POINT('',#48199); +#48199 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#48200 = LINE('',#48201,#48202); +#48201 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#48202 = VECTOR('',#48203,1.); +#48203 = DIRECTION('',(-1.,-0.,-0.)); +#48204 = ORIENTED_EDGE('',*,*,#48205,.F.); +#48205 = EDGE_CURVE('',#48048,#48198,#48206,.T.); +#48206 = LINE('',#48207,#48208); +#48207 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48208 = VECTOR('',#48209,1.); +#48209 = DIRECTION('',(0.,0.,1.)); +#48210 = ORIENTED_EDGE('',*,*,#48047,.F.); +#48211 = PLANE('',#48212); +#48212 = AXIS2_PLACEMENT_3D('',#48213,#48214,#48215); +#48213 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48214 = DIRECTION('',(0.,1.,0.)); +#48215 = DIRECTION('',(1.,0.,0.)); +#48216 = ADVANCED_FACE('',(#48217),#48244,.F.); +#48217 = FACE_BOUND('',#48218,.F.); +#48218 = EDGE_LOOP('',(#48219,#48227,#48228,#48229,#48237)); +#48219 = ORIENTED_EDGE('',*,*,#48220,.F.); +#48220 = EDGE_CURVE('',#48087,#48221,#48223,.T.); +#48221 = VERTEX_POINT('',#48222); +#48222 = CARTESIAN_POINT('',(9.,4.265,0.8)); +#48223 = LINE('',#48224,#48225); +#48224 = CARTESIAN_POINT('',(9.,4.265,0.8)); +#48225 = VECTOR('',#48226,1.); +#48226 = DIRECTION('',(0.,0.,1.)); +#48227 = ORIENTED_EDGE('',*,*,#48094,.F.); +#48228 = ORIENTED_EDGE('',*,*,#48141,.F.); +#48229 = ORIENTED_EDGE('',*,*,#48230,.F.); +#48230 = EDGE_CURVE('',#48231,#48142,#48233,.T.); +#48231 = VERTEX_POINT('',#48232); +#48232 = CARTESIAN_POINT('',(8.725,3.99,0.8)); +#48233 = LINE('',#48234,#48235); +#48234 = CARTESIAN_POINT('',(8.725,3.99,0.8)); +#48235 = VECTOR('',#48236,1.); +#48236 = DIRECTION('',(0.,0.,-1.)); +#48237 = ORIENTED_EDGE('',*,*,#48238,.T.); +#48238 = EDGE_CURVE('',#48231,#48221,#48239,.T.); +#48239 = CIRCLE('',#48240,0.275); +#48240 = AXIS2_PLACEMENT_3D('',#48241,#48242,#48243); +#48241 = CARTESIAN_POINT('',(9.,3.99,0.8)); +#48242 = DIRECTION('',(0.,0.,-1.)); +#48243 = DIRECTION('',(-1.,-0.,-0.)); +#48244 = CYLINDRICAL_SURFACE('',#48245,0.275); +#48245 = AXIS2_PLACEMENT_3D('',#48246,#48247,#48248); +#48246 = CARTESIAN_POINT('',(9.,3.99,0.8)); +#48247 = DIRECTION('',(0.,0.,1.)); +#48248 = DIRECTION('',(-1.,0.,0.)); +#48249 = ADVANCED_FACE('',(#48250),#48261,.F.); +#48250 = FACE_BOUND('',#48251,.T.); +#48251 = EDGE_LOOP('',(#48252,#48253,#48254,#48260)); +#48252 = ORIENTED_EDGE('',*,*,#48086,.F.); +#48253 = ORIENTED_EDGE('',*,*,#48189,.T.); +#48254 = ORIENTED_EDGE('',*,*,#48255,.T.); +#48255 = EDGE_CURVE('',#48190,#48221,#48256,.T.); +#48256 = LINE('',#48257,#48258); +#48257 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#48258 = VECTOR('',#48259,1.); +#48259 = DIRECTION('',(-0.,-1.,-0.)); +#48260 = ORIENTED_EDGE('',*,*,#48220,.F.); +#48261 = PLANE('',#48262); +#48262 = AXIS2_PLACEMENT_3D('',#48263,#48264,#48265); +#48263 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48264 = DIRECTION('',(-1.,-0.,-0.)); +#48265 = DIRECTION('',(0.,1.,0.)); +#48266 = ADVANCED_FACE('',(#48267),#48285,.T.); +#48267 = FACE_BOUND('',#48268,.F.); +#48268 = EDGE_LOOP('',(#48269,#48270,#48278,#48284)); +#48269 = ORIENTED_EDGE('',*,*,#48108,.T.); +#48270 = ORIENTED_EDGE('',*,*,#48271,.T.); +#48271 = EDGE_CURVE('',#48109,#48272,#48274,.T.); +#48272 = VERTEX_POINT('',#48273); +#48273 = CARTESIAN_POINT('',(8.15,3.54,0.)); +#48274 = LINE('',#48275,#48276); +#48275 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#48276 = VECTOR('',#48277,1.); +#48277 = DIRECTION('',(-0.,-1.,-0.)); +#48278 = ORIENTED_EDGE('',*,*,#48279,.F.); +#48279 = EDGE_CURVE('',#48168,#48272,#48280,.T.); +#48280 = LINE('',#48281,#48282); +#48281 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48282 = VECTOR('',#48283,1.); +#48283 = DIRECTION('',(-1.,-0.,-0.)); +#48284 = ORIENTED_EDGE('',*,*,#48175,.F.); +#48285 = PLANE('',#48286); +#48286 = AXIS2_PLACEMENT_3D('',#48287,#48288,#48289); +#48287 = CARTESIAN_POINT('',(8.55,4.44,0.)); +#48288 = DIRECTION('',(-0.,-0.,-1.)); +#48289 = DIRECTION('',(0.,1.,-0.)); +#48290 = ADVANCED_FACE('',(#48291),#48316,.F.); +#48291 = FACE_BOUND('',#48292,.T.); +#48292 = EDGE_LOOP('',(#48293,#48294,#48302,#48310)); +#48293 = ORIENTED_EDGE('',*,*,#48124,.T.); +#48294 = ORIENTED_EDGE('',*,*,#48295,.T.); +#48295 = EDGE_CURVE('',#48117,#48296,#48298,.T.); +#48296 = VERTEX_POINT('',#48297); +#48297 = CARTESIAN_POINT('',(8.15,3.54,0.4)); +#48298 = LINE('',#48299,#48300); +#48299 = CARTESIAN_POINT('',(8.15,4.44,0.4)); +#48300 = VECTOR('',#48301,1.); +#48301 = DIRECTION('',(-0.,-1.,-0.)); +#48302 = ORIENTED_EDGE('',*,*,#48303,.F.); +#48303 = EDGE_CURVE('',#48304,#48296,#48306,.T.); +#48304 = VERTEX_POINT('',#48305); +#48305 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#48306 = LINE('',#48307,#48308); +#48307 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#48308 = VECTOR('',#48309,1.); +#48309 = DIRECTION('',(-1.,-0.,-0.)); +#48310 = ORIENTED_EDGE('',*,*,#48311,.F.); +#48311 = EDGE_CURVE('',#48048,#48304,#48312,.T.); +#48312 = LINE('',#48313,#48314); +#48313 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48314 = VECTOR('',#48315,1.); +#48315 = DIRECTION('',(-0.,-1.,-0.)); +#48316 = PLANE('',#48317); +#48317 = AXIS2_PLACEMENT_3D('',#48318,#48319,#48320); +#48318 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48319 = DIRECTION('',(-0.,-0.,-1.)); +#48320 = DIRECTION('',(0.,1.,-0.)); +#48321 = ADVANCED_FACE('',(#48322),#48333,.T.); +#48322 = FACE_BOUND('',#48323,.F.); +#48323 = EDGE_LOOP('',(#48324,#48325,#48326,#48332)); +#48324 = ORIENTED_EDGE('',*,*,#48116,.T.); +#48325 = ORIENTED_EDGE('',*,*,#48295,.T.); +#48326 = ORIENTED_EDGE('',*,*,#48327,.F.); +#48327 = EDGE_CURVE('',#48272,#48296,#48328,.T.); +#48328 = LINE('',#48329,#48330); +#48329 = CARTESIAN_POINT('',(8.15,3.54,0.)); +#48330 = VECTOR('',#48331,1.); +#48331 = DIRECTION('',(0.,0.,1.)); +#48332 = ORIENTED_EDGE('',*,*,#48271,.F.); +#48333 = PLANE('',#48334); +#48334 = AXIS2_PLACEMENT_3D('',#48335,#48336,#48337); +#48335 = CARTESIAN_POINT('',(8.15,4.44,0.)); +#48336 = DIRECTION('',(-1.,-0.,-0.)); +#48337 = DIRECTION('',(0.,1.,0.)); +#48338 = ADVANCED_FACE('',(#48339),#48362,.T.); +#48339 = FACE_BOUND('',#48340,.F.); +#48340 = EDGE_LOOP('',(#48341,#48347,#48355,#48361)); +#48341 = ORIENTED_EDGE('',*,*,#48342,.T.); +#48342 = EDGE_CURVE('',#48168,#48304,#48343,.T.); +#48343 = LINE('',#48344,#48345); +#48344 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48345 = VECTOR('',#48346,1.); +#48346 = DIRECTION('',(0.,0.,1.)); +#48347 = ORIENTED_EDGE('',*,*,#48348,.T.); +#48348 = EDGE_CURVE('',#48304,#48349,#48351,.T.); +#48349 = VERTEX_POINT('',#48350); +#48350 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#48351 = LINE('',#48352,#48353); +#48352 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#48353 = VECTOR('',#48354,1.); +#48354 = DIRECTION('',(1.,0.,0.)); +#48355 = ORIENTED_EDGE('',*,*,#48356,.F.); +#48356 = EDGE_CURVE('',#48160,#48349,#48357,.T.); +#48357 = LINE('',#48358,#48359); +#48358 = CARTESIAN_POINT('',(9.,3.54,0.)); +#48359 = VECTOR('',#48360,1.); +#48360 = DIRECTION('',(0.,0.,1.)); +#48361 = ORIENTED_EDGE('',*,*,#48167,.F.); +#48362 = PLANE('',#48363); +#48363 = AXIS2_PLACEMENT_3D('',#48364,#48365,#48366); +#48364 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48365 = DIRECTION('',(-0.,-1.,-0.)); +#48366 = DIRECTION('',(-1.,0.,0.)); +#48367 = ADVANCED_FACE('',(#48368),#48386,.F.); +#48368 = FACE_BOUND('',#48369,.T.); +#48369 = EDGE_LOOP('',(#48370,#48371,#48379,#48385)); +#48370 = ORIENTED_EDGE('',*,*,#48159,.F.); +#48371 = ORIENTED_EDGE('',*,*,#48372,.T.); +#48372 = EDGE_CURVE('',#48151,#48373,#48375,.T.); +#48373 = VERTEX_POINT('',#48374); +#48374 = CARTESIAN_POINT('',(9.,3.715,0.4)); +#48375 = LINE('',#48376,#48377); +#48376 = CARTESIAN_POINT('',(9.,3.715,0.8)); +#48377 = VECTOR('',#48378,1.); +#48378 = DIRECTION('',(0.,0.,1.)); +#48379 = ORIENTED_EDGE('',*,*,#48380,.T.); +#48380 = EDGE_CURVE('',#48373,#48349,#48381,.T.); +#48381 = LINE('',#48382,#48383); +#48382 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48383 = VECTOR('',#48384,1.); +#48384 = DIRECTION('',(-0.,-1.,-0.)); +#48385 = ORIENTED_EDGE('',*,*,#48356,.F.); +#48386 = PLANE('',#48387); +#48387 = AXIS2_PLACEMENT_3D('',#48388,#48389,#48390); +#48388 = CARTESIAN_POINT('',(9.,4.44,0.)); +#48389 = DIRECTION('',(-1.,-0.,-0.)); +#48390 = DIRECTION('',(0.,1.,0.)); +#48391 = ADVANCED_FACE('',(#48392),#48412,.F.); +#48392 = FACE_BOUND('',#48393,.F.); +#48393 = EDGE_LOOP('',(#48394,#48395,#48396,#48404,#48411)); +#48394 = ORIENTED_EDGE('',*,*,#48150,.F.); +#48395 = ORIENTED_EDGE('',*,*,#48372,.T.); +#48396 = ORIENTED_EDGE('',*,*,#48397,.T.); +#48397 = EDGE_CURVE('',#48373,#48398,#48400,.T.); +#48398 = VERTEX_POINT('',#48399); +#48399 = CARTESIAN_POINT('',(9.,3.715,0.8)); +#48400 = LINE('',#48401,#48402); +#48401 = CARTESIAN_POINT('',(9.,3.715,0.8)); +#48402 = VECTOR('',#48403,1.); +#48403 = DIRECTION('',(0.,0.,1.)); +#48404 = ORIENTED_EDGE('',*,*,#48405,.T.); +#48405 = EDGE_CURVE('',#48398,#48231,#48406,.T.); +#48406 = CIRCLE('',#48407,0.275); +#48407 = AXIS2_PLACEMENT_3D('',#48408,#48409,#48410); +#48408 = CARTESIAN_POINT('',(9.,3.99,0.8)); +#48409 = DIRECTION('',(0.,0.,-1.)); +#48410 = DIRECTION('',(-1.,-0.,-0.)); +#48411 = ORIENTED_EDGE('',*,*,#48230,.T.); +#48412 = CYLINDRICAL_SURFACE('',#48413,0.275); +#48413 = AXIS2_PLACEMENT_3D('',#48414,#48415,#48416); +#48414 = CARTESIAN_POINT('',(9.,3.99,0.8)); +#48415 = DIRECTION('',(0.,0.,1.)); +#48416 = DIRECTION('',(-1.,0.,0.)); +#48417 = ADVANCED_FACE('',(#48418),#48436,.T.); +#48418 = FACE_BOUND('',#48419,.F.); +#48419 = EDGE_LOOP('',(#48420,#48421,#48429,#48435)); +#48420 = ORIENTED_EDGE('',*,*,#48205,.T.); +#48421 = ORIENTED_EDGE('',*,*,#48422,.T.); +#48422 = EDGE_CURVE('',#48198,#48423,#48425,.T.); +#48423 = VERTEX_POINT('',#48424); +#48424 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#48425 = LINE('',#48426,#48427); +#48426 = CARTESIAN_POINT('',(8.55,4.44,0.8)); +#48427 = VECTOR('',#48428,1.); +#48428 = DIRECTION('',(-0.,-1.,-0.)); +#48429 = ORIENTED_EDGE('',*,*,#48430,.F.); +#48430 = EDGE_CURVE('',#48304,#48423,#48431,.T.); +#48431 = LINE('',#48432,#48433); +#48432 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#48433 = VECTOR('',#48434,1.); +#48434 = DIRECTION('',(0.,0.,1.)); +#48435 = ORIENTED_EDGE('',*,*,#48311,.F.); +#48436 = PLANE('',#48437); +#48437 = AXIS2_PLACEMENT_3D('',#48438,#48439,#48440); +#48438 = CARTESIAN_POINT('',(8.55,4.44,0.4)); +#48439 = DIRECTION('',(-1.,-0.,-0.)); +#48440 = DIRECTION('',(0.,1.,0.)); +#48441 = ADVANCED_FACE('',(#48442),#48463,.T.); +#48442 = FACE_BOUND('',#48443,.F.); +#48443 = EDGE_LOOP('',(#48444,#48445,#48446,#48447,#48448,#48456,#48462) + ); +#48444 = ORIENTED_EDGE('',*,*,#48197,.F.); +#48445 = ORIENTED_EDGE('',*,*,#48255,.T.); +#48446 = ORIENTED_EDGE('',*,*,#48238,.F.); +#48447 = ORIENTED_EDGE('',*,*,#48405,.F.); +#48448 = ORIENTED_EDGE('',*,*,#48449,.T.); +#48449 = EDGE_CURVE('',#48398,#48450,#48452,.T.); +#48450 = VERTEX_POINT('',#48451); +#48451 = CARTESIAN_POINT('',(9.,3.54,0.8)); +#48452 = LINE('',#48453,#48454); +#48453 = CARTESIAN_POINT('',(9.,4.44,0.8)); +#48454 = VECTOR('',#48455,1.); +#48455 = DIRECTION('',(-0.,-1.,-0.)); +#48456 = ORIENTED_EDGE('',*,*,#48457,.F.); +#48457 = EDGE_CURVE('',#48423,#48450,#48458,.T.); +#48458 = LINE('',#48459,#48460); +#48459 = CARTESIAN_POINT('',(8.55,3.54,0.8)); +#48460 = VECTOR('',#48461,1.); +#48461 = DIRECTION('',(1.,0.,0.)); +#48462 = ORIENTED_EDGE('',*,*,#48422,.F.); +#48463 = PLANE('',#48464); +#48464 = AXIS2_PLACEMENT_3D('',#48465,#48466,#48467); +#48465 = CARTESIAN_POINT('',(8.775,3.99,0.8)); +#48466 = DIRECTION('',(0.,0.,1.)); +#48467 = DIRECTION('',(1.,0.,-0.)); +#48468 = ADVANCED_FACE('',(#48469),#48475,.T.); +#48469 = FACE_BOUND('',#48470,.F.); +#48470 = EDGE_LOOP('',(#48471,#48472,#48473,#48474)); +#48471 = ORIENTED_EDGE('',*,*,#48279,.T.); +#48472 = ORIENTED_EDGE('',*,*,#48327,.T.); +#48473 = ORIENTED_EDGE('',*,*,#48303,.F.); +#48474 = ORIENTED_EDGE('',*,*,#48342,.F.); +#48475 = PLANE('',#48476); +#48476 = AXIS2_PLACEMENT_3D('',#48477,#48478,#48479); +#48477 = CARTESIAN_POINT('',(8.55,3.54,0.)); +#48478 = DIRECTION('',(-0.,-1.,-0.)); +#48479 = DIRECTION('',(0.,0.,-1.)); +#48480 = ADVANCED_FACE('',(#48481),#48492,.T.); +#48481 = FACE_BOUND('',#48482,.F.); +#48482 = EDGE_LOOP('',(#48483,#48484,#48485,#48491)); +#48483 = ORIENTED_EDGE('',*,*,#48430,.T.); +#48484 = ORIENTED_EDGE('',*,*,#48457,.T.); +#48485 = ORIENTED_EDGE('',*,*,#48486,.F.); +#48486 = EDGE_CURVE('',#48349,#48450,#48487,.T.); +#48487 = LINE('',#48488,#48489); +#48488 = CARTESIAN_POINT('',(9.,3.54,0.4)); +#48489 = VECTOR('',#48490,1.); +#48490 = DIRECTION('',(0.,0.,1.)); +#48491 = ORIENTED_EDGE('',*,*,#48348,.F.); +#48492 = PLANE('',#48493); +#48493 = AXIS2_PLACEMENT_3D('',#48494,#48495,#48496); +#48494 = CARTESIAN_POINT('',(8.55,3.54,0.4)); +#48495 = DIRECTION('',(-0.,-1.,-0.)); +#48496 = DIRECTION('',(-1.,0.,0.)); +#48497 = ADVANCED_FACE('',(#48498),#48504,.F.); +#48498 = FACE_BOUND('',#48499,.T.); +#48499 = EDGE_LOOP('',(#48500,#48501,#48502,#48503)); +#48500 = ORIENTED_EDGE('',*,*,#48380,.F.); +#48501 = ORIENTED_EDGE('',*,*,#48397,.T.); +#48502 = ORIENTED_EDGE('',*,*,#48449,.T.); +#48503 = ORIENTED_EDGE('',*,*,#48486,.F.); +#48504 = PLANE('',#48505); +#48505 = AXIS2_PLACEMENT_3D('',#48506,#48507,#48508); +#48506 = CARTESIAN_POINT('',(9.,4.44,0.4)); +#48507 = DIRECTION('',(-1.,-0.,-0.)); +#48508 = DIRECTION('',(0.,1.,0.)); +#48509 = MANIFOLD_SOLID_BREP('',#48510); +#48510 = CLOSED_SHELL('',(#48511,#48551,#48582,#48613,#48663,#48694, + #48727,#48744,#48768,#48799,#48816,#48845,#48869,#48895,#48919, + #48946,#48958,#48975)); +#48511 = ADVANCED_FACE('',(#48512),#48546,.T.); +#48512 = FACE_BOUND('',#48513,.F.); +#48513 = EDGE_LOOP('',(#48514,#48524,#48532,#48540)); +#48514 = ORIENTED_EDGE('',*,*,#48515,.T.); +#48515 = EDGE_CURVE('',#48516,#48518,#48520,.T.); +#48516 = VERTEX_POINT('',#48517); +#48517 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48518 = VERTEX_POINT('',#48519); +#48519 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48520 = LINE('',#48521,#48522); +#48521 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48522 = VECTOR('',#48523,1.); +#48523 = DIRECTION('',(0.,0.,1.)); +#48524 = ORIENTED_EDGE('',*,*,#48525,.T.); +#48525 = EDGE_CURVE('',#48518,#48526,#48528,.T.); +#48526 = VERTEX_POINT('',#48527); +#48527 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48528 = LINE('',#48529,#48530); +#48529 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48530 = VECTOR('',#48531,1.); +#48531 = DIRECTION('',(-1.,-0.,-0.)); +#48532 = ORIENTED_EDGE('',*,*,#48533,.F.); +#48533 = EDGE_CURVE('',#48534,#48526,#48536,.T.); +#48534 = VERTEX_POINT('',#48535); +#48535 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48536 = LINE('',#48537,#48538); +#48537 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48538 = VECTOR('',#48539,1.); +#48539 = DIRECTION('',(0.,0.,1.)); +#48540 = ORIENTED_EDGE('',*,*,#48541,.F.); +#48541 = EDGE_CURVE('',#48516,#48534,#48542,.T.); +#48542 = LINE('',#48543,#48544); +#48543 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48544 = VECTOR('',#48545,1.); +#48545 = DIRECTION('',(-1.,-0.,-0.)); +#48546 = PLANE('',#48547); +#48547 = AXIS2_PLACEMENT_3D('',#48548,#48549,#48550); +#48548 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48549 = DIRECTION('',(0.,1.,0.)); +#48550 = DIRECTION('',(1.,0.,0.)); +#48551 = ADVANCED_FACE('',(#48552),#48577,.F.); +#48552 = FACE_BOUND('',#48553,.T.); +#48553 = EDGE_LOOP('',(#48554,#48562,#48563,#48571)); +#48554 = ORIENTED_EDGE('',*,*,#48555,.F.); +#48555 = EDGE_CURVE('',#48516,#48556,#48558,.T.); +#48556 = VERTEX_POINT('',#48557); +#48557 = CARTESIAN_POINT('',(9.,2.995,0.)); +#48558 = LINE('',#48559,#48560); +#48559 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48560 = VECTOR('',#48561,1.); +#48561 = DIRECTION('',(-0.,-1.,-0.)); +#48562 = ORIENTED_EDGE('',*,*,#48515,.T.); +#48563 = ORIENTED_EDGE('',*,*,#48564,.T.); +#48564 = EDGE_CURVE('',#48518,#48565,#48567,.T.); +#48565 = VERTEX_POINT('',#48566); +#48566 = CARTESIAN_POINT('',(9.,2.995,0.4)); +#48567 = LINE('',#48568,#48569); +#48568 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48569 = VECTOR('',#48570,1.); +#48570 = DIRECTION('',(-0.,-1.,-0.)); +#48571 = ORIENTED_EDGE('',*,*,#48572,.F.); +#48572 = EDGE_CURVE('',#48556,#48565,#48573,.T.); +#48573 = LINE('',#48574,#48575); +#48574 = CARTESIAN_POINT('',(9.,2.995,0.8)); +#48575 = VECTOR('',#48576,1.); +#48576 = DIRECTION('',(0.,0.,1.)); +#48577 = PLANE('',#48578); +#48578 = AXIS2_PLACEMENT_3D('',#48579,#48580,#48581); +#48579 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48580 = DIRECTION('',(-1.,-0.,-0.)); +#48581 = DIRECTION('',(0.,1.,0.)); +#48582 = ADVANCED_FACE('',(#48583),#48608,.F.); +#48583 = FACE_BOUND('',#48584,.T.); +#48584 = EDGE_LOOP('',(#48585,#48593,#48601,#48607)); +#48585 = ORIENTED_EDGE('',*,*,#48586,.T.); +#48586 = EDGE_CURVE('',#48534,#48587,#48589,.T.); +#48587 = VERTEX_POINT('',#48588); +#48588 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#48589 = LINE('',#48590,#48591); +#48590 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48591 = VECTOR('',#48592,1.); +#48592 = DIRECTION('',(-1.,-0.,-0.)); +#48593 = ORIENTED_EDGE('',*,*,#48594,.T.); +#48594 = EDGE_CURVE('',#48587,#48595,#48597,.T.); +#48595 = VERTEX_POINT('',#48596); +#48596 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#48597 = LINE('',#48598,#48599); +#48598 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#48599 = VECTOR('',#48600,1.); +#48600 = DIRECTION('',(0.,0.,1.)); +#48601 = ORIENTED_EDGE('',*,*,#48602,.F.); +#48602 = EDGE_CURVE('',#48526,#48595,#48603,.T.); +#48603 = LINE('',#48604,#48605); +#48604 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48605 = VECTOR('',#48606,1.); +#48606 = DIRECTION('',(-1.,-0.,-0.)); +#48607 = ORIENTED_EDGE('',*,*,#48533,.F.); +#48608 = PLANE('',#48609); +#48609 = AXIS2_PLACEMENT_3D('',#48610,#48611,#48612); +#48610 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48611 = DIRECTION('',(-0.,-1.,-0.)); +#48612 = DIRECTION('',(0.,0.,-1.)); +#48613 = ADVANCED_FACE('',(#48614),#48658,.F.); +#48614 = FACE_BOUND('',#48615,.T.); +#48615 = EDGE_LOOP('',(#48616,#48617,#48618,#48627,#48636,#48644,#48652) + ); +#48616 = ORIENTED_EDGE('',*,*,#48541,.F.); +#48617 = ORIENTED_EDGE('',*,*,#48555,.T.); +#48618 = ORIENTED_EDGE('',*,*,#48619,.F.); +#48619 = EDGE_CURVE('',#48620,#48556,#48622,.T.); +#48620 = VERTEX_POINT('',#48621); +#48621 = CARTESIAN_POINT('',(8.725,2.72,0.)); +#48622 = CIRCLE('',#48623,0.275); +#48623 = AXIS2_PLACEMENT_3D('',#48624,#48625,#48626); +#48624 = CARTESIAN_POINT('',(9.,2.72,0.)); +#48625 = DIRECTION('',(0.,0.,-1.)); +#48626 = DIRECTION('',(-1.,-0.,-0.)); +#48627 = ORIENTED_EDGE('',*,*,#48628,.F.); +#48628 = EDGE_CURVE('',#48629,#48620,#48631,.T.); +#48629 = VERTEX_POINT('',#48630); +#48630 = CARTESIAN_POINT('',(9.,2.445,0.)); +#48631 = CIRCLE('',#48632,0.275); +#48632 = AXIS2_PLACEMENT_3D('',#48633,#48634,#48635); +#48633 = CARTESIAN_POINT('',(9.,2.72,0.)); +#48634 = DIRECTION('',(0.,0.,-1.)); +#48635 = DIRECTION('',(-1.,-0.,-0.)); +#48636 = ORIENTED_EDGE('',*,*,#48637,.T.); +#48637 = EDGE_CURVE('',#48629,#48638,#48640,.T.); +#48638 = VERTEX_POINT('',#48639); +#48639 = CARTESIAN_POINT('',(9.,2.27,0.)); +#48640 = LINE('',#48641,#48642); +#48641 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48642 = VECTOR('',#48643,1.); +#48643 = DIRECTION('',(-0.,-1.,-0.)); +#48644 = ORIENTED_EDGE('',*,*,#48645,.F.); +#48645 = EDGE_CURVE('',#48646,#48638,#48648,.T.); +#48646 = VERTEX_POINT('',#48647); +#48647 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48648 = LINE('',#48649,#48650); +#48649 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48650 = VECTOR('',#48651,1.); +#48651 = DIRECTION('',(1.,0.,0.)); +#48652 = ORIENTED_EDGE('',*,*,#48653,.F.); +#48653 = EDGE_CURVE('',#48534,#48646,#48654,.T.); +#48654 = LINE('',#48655,#48656); +#48655 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48656 = VECTOR('',#48657,1.); +#48657 = DIRECTION('',(-0.,-1.,-0.)); +#48658 = PLANE('',#48659); +#48659 = AXIS2_PLACEMENT_3D('',#48660,#48661,#48662); +#48660 = CARTESIAN_POINT('',(8.775,2.72,0.)); +#48661 = DIRECTION('',(0.,0.,1.)); +#48662 = DIRECTION('',(1.,0.,-0.)); +#48663 = ADVANCED_FACE('',(#48664),#48689,.T.); +#48664 = FACE_BOUND('',#48665,.F.); +#48665 = EDGE_LOOP('',(#48666,#48674,#48682,#48688)); +#48666 = ORIENTED_EDGE('',*,*,#48667,.T.); +#48667 = EDGE_CURVE('',#48518,#48668,#48670,.T.); +#48668 = VERTEX_POINT('',#48669); +#48669 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#48670 = LINE('',#48671,#48672); +#48671 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48672 = VECTOR('',#48673,1.); +#48673 = DIRECTION('',(0.,0.,1.)); +#48674 = ORIENTED_EDGE('',*,*,#48675,.T.); +#48675 = EDGE_CURVE('',#48668,#48676,#48678,.T.); +#48676 = VERTEX_POINT('',#48677); +#48677 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#48678 = LINE('',#48679,#48680); +#48679 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#48680 = VECTOR('',#48681,1.); +#48681 = DIRECTION('',(-1.,-0.,-0.)); +#48682 = ORIENTED_EDGE('',*,*,#48683,.F.); +#48683 = EDGE_CURVE('',#48526,#48676,#48684,.T.); +#48684 = LINE('',#48685,#48686); +#48685 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48686 = VECTOR('',#48687,1.); +#48687 = DIRECTION('',(0.,0.,1.)); +#48688 = ORIENTED_EDGE('',*,*,#48525,.F.); +#48689 = PLANE('',#48690); +#48690 = AXIS2_PLACEMENT_3D('',#48691,#48692,#48693); +#48691 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48692 = DIRECTION('',(0.,1.,0.)); +#48693 = DIRECTION('',(1.,0.,0.)); +#48694 = ADVANCED_FACE('',(#48695),#48722,.F.); +#48695 = FACE_BOUND('',#48696,.F.); +#48696 = EDGE_LOOP('',(#48697,#48705,#48706,#48707,#48715)); +#48697 = ORIENTED_EDGE('',*,*,#48698,.F.); +#48698 = EDGE_CURVE('',#48565,#48699,#48701,.T.); +#48699 = VERTEX_POINT('',#48700); +#48700 = CARTESIAN_POINT('',(9.,2.995,0.8)); +#48701 = LINE('',#48702,#48703); +#48702 = CARTESIAN_POINT('',(9.,2.995,0.8)); +#48703 = VECTOR('',#48704,1.); +#48704 = DIRECTION('',(0.,0.,1.)); +#48705 = ORIENTED_EDGE('',*,*,#48572,.F.); +#48706 = ORIENTED_EDGE('',*,*,#48619,.F.); +#48707 = ORIENTED_EDGE('',*,*,#48708,.F.); +#48708 = EDGE_CURVE('',#48709,#48620,#48711,.T.); +#48709 = VERTEX_POINT('',#48710); +#48710 = CARTESIAN_POINT('',(8.725,2.72,0.8)); +#48711 = LINE('',#48712,#48713); +#48712 = CARTESIAN_POINT('',(8.725,2.72,0.8)); +#48713 = VECTOR('',#48714,1.); +#48714 = DIRECTION('',(0.,0.,-1.)); +#48715 = ORIENTED_EDGE('',*,*,#48716,.T.); +#48716 = EDGE_CURVE('',#48709,#48699,#48717,.T.); +#48717 = CIRCLE('',#48718,0.275); +#48718 = AXIS2_PLACEMENT_3D('',#48719,#48720,#48721); +#48719 = CARTESIAN_POINT('',(9.,2.72,0.8)); +#48720 = DIRECTION('',(0.,0.,-1.)); +#48721 = DIRECTION('',(-1.,-0.,-0.)); +#48722 = CYLINDRICAL_SURFACE('',#48723,0.275); +#48723 = AXIS2_PLACEMENT_3D('',#48724,#48725,#48726); +#48724 = CARTESIAN_POINT('',(9.,2.72,0.8)); +#48725 = DIRECTION('',(0.,0.,1.)); +#48726 = DIRECTION('',(-1.,0.,0.)); +#48727 = ADVANCED_FACE('',(#48728),#48739,.F.); +#48728 = FACE_BOUND('',#48729,.T.); +#48729 = EDGE_LOOP('',(#48730,#48731,#48732,#48738)); +#48730 = ORIENTED_EDGE('',*,*,#48564,.F.); +#48731 = ORIENTED_EDGE('',*,*,#48667,.T.); +#48732 = ORIENTED_EDGE('',*,*,#48733,.T.); +#48733 = EDGE_CURVE('',#48668,#48699,#48734,.T.); +#48734 = LINE('',#48735,#48736); +#48735 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#48736 = VECTOR('',#48737,1.); +#48737 = DIRECTION('',(-0.,-1.,-0.)); +#48738 = ORIENTED_EDGE('',*,*,#48698,.F.); +#48739 = PLANE('',#48740); +#48740 = AXIS2_PLACEMENT_3D('',#48741,#48742,#48743); +#48741 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48742 = DIRECTION('',(-1.,-0.,-0.)); +#48743 = DIRECTION('',(0.,1.,0.)); +#48744 = ADVANCED_FACE('',(#48745),#48763,.T.); +#48745 = FACE_BOUND('',#48746,.F.); +#48746 = EDGE_LOOP('',(#48747,#48748,#48756,#48762)); +#48747 = ORIENTED_EDGE('',*,*,#48586,.T.); +#48748 = ORIENTED_EDGE('',*,*,#48749,.T.); +#48749 = EDGE_CURVE('',#48587,#48750,#48752,.T.); +#48750 = VERTEX_POINT('',#48751); +#48751 = CARTESIAN_POINT('',(8.15,2.27,0.)); +#48752 = LINE('',#48753,#48754); +#48753 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#48754 = VECTOR('',#48755,1.); +#48755 = DIRECTION('',(-0.,-1.,-0.)); +#48756 = ORIENTED_EDGE('',*,*,#48757,.F.); +#48757 = EDGE_CURVE('',#48646,#48750,#48758,.T.); +#48758 = LINE('',#48759,#48760); +#48759 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48760 = VECTOR('',#48761,1.); +#48761 = DIRECTION('',(-1.,-0.,-0.)); +#48762 = ORIENTED_EDGE('',*,*,#48653,.F.); +#48763 = PLANE('',#48764); +#48764 = AXIS2_PLACEMENT_3D('',#48765,#48766,#48767); +#48765 = CARTESIAN_POINT('',(8.55,3.17,0.)); +#48766 = DIRECTION('',(-0.,-0.,-1.)); +#48767 = DIRECTION('',(0.,1.,-0.)); +#48768 = ADVANCED_FACE('',(#48769),#48794,.F.); +#48769 = FACE_BOUND('',#48770,.T.); +#48770 = EDGE_LOOP('',(#48771,#48772,#48780,#48788)); +#48771 = ORIENTED_EDGE('',*,*,#48602,.T.); +#48772 = ORIENTED_EDGE('',*,*,#48773,.T.); +#48773 = EDGE_CURVE('',#48595,#48774,#48776,.T.); +#48774 = VERTEX_POINT('',#48775); +#48775 = CARTESIAN_POINT('',(8.15,2.27,0.4)); +#48776 = LINE('',#48777,#48778); +#48777 = CARTESIAN_POINT('',(8.15,3.17,0.4)); +#48778 = VECTOR('',#48779,1.); +#48779 = DIRECTION('',(-0.,-1.,-0.)); +#48780 = ORIENTED_EDGE('',*,*,#48781,.F.); +#48781 = EDGE_CURVE('',#48782,#48774,#48784,.T.); +#48782 = VERTEX_POINT('',#48783); +#48783 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#48784 = LINE('',#48785,#48786); +#48785 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#48786 = VECTOR('',#48787,1.); +#48787 = DIRECTION('',(-1.,-0.,-0.)); +#48788 = ORIENTED_EDGE('',*,*,#48789,.F.); +#48789 = EDGE_CURVE('',#48526,#48782,#48790,.T.); +#48790 = LINE('',#48791,#48792); +#48791 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48792 = VECTOR('',#48793,1.); +#48793 = DIRECTION('',(-0.,-1.,-0.)); +#48794 = PLANE('',#48795); +#48795 = AXIS2_PLACEMENT_3D('',#48796,#48797,#48798); +#48796 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48797 = DIRECTION('',(-0.,-0.,-1.)); +#48798 = DIRECTION('',(0.,1.,-0.)); +#48799 = ADVANCED_FACE('',(#48800),#48811,.T.); +#48800 = FACE_BOUND('',#48801,.F.); +#48801 = EDGE_LOOP('',(#48802,#48803,#48804,#48810)); +#48802 = ORIENTED_EDGE('',*,*,#48594,.T.); +#48803 = ORIENTED_EDGE('',*,*,#48773,.T.); +#48804 = ORIENTED_EDGE('',*,*,#48805,.F.); +#48805 = EDGE_CURVE('',#48750,#48774,#48806,.T.); +#48806 = LINE('',#48807,#48808); +#48807 = CARTESIAN_POINT('',(8.15,2.27,0.)); +#48808 = VECTOR('',#48809,1.); +#48809 = DIRECTION('',(0.,0.,1.)); +#48810 = ORIENTED_EDGE('',*,*,#48749,.F.); +#48811 = PLANE('',#48812); +#48812 = AXIS2_PLACEMENT_3D('',#48813,#48814,#48815); +#48813 = CARTESIAN_POINT('',(8.15,3.17,0.)); +#48814 = DIRECTION('',(-1.,-0.,-0.)); +#48815 = DIRECTION('',(0.,1.,0.)); +#48816 = ADVANCED_FACE('',(#48817),#48840,.T.); +#48817 = FACE_BOUND('',#48818,.F.); +#48818 = EDGE_LOOP('',(#48819,#48825,#48833,#48839)); +#48819 = ORIENTED_EDGE('',*,*,#48820,.T.); +#48820 = EDGE_CURVE('',#48646,#48782,#48821,.T.); +#48821 = LINE('',#48822,#48823); +#48822 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48823 = VECTOR('',#48824,1.); +#48824 = DIRECTION('',(0.,0.,1.)); +#48825 = ORIENTED_EDGE('',*,*,#48826,.T.); +#48826 = EDGE_CURVE('',#48782,#48827,#48829,.T.); +#48827 = VERTEX_POINT('',#48828); +#48828 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#48829 = LINE('',#48830,#48831); +#48830 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#48831 = VECTOR('',#48832,1.); +#48832 = DIRECTION('',(1.,0.,0.)); +#48833 = ORIENTED_EDGE('',*,*,#48834,.F.); +#48834 = EDGE_CURVE('',#48638,#48827,#48835,.T.); +#48835 = LINE('',#48836,#48837); +#48836 = CARTESIAN_POINT('',(9.,2.27,0.)); +#48837 = VECTOR('',#48838,1.); +#48838 = DIRECTION('',(0.,0.,1.)); +#48839 = ORIENTED_EDGE('',*,*,#48645,.F.); +#48840 = PLANE('',#48841); +#48841 = AXIS2_PLACEMENT_3D('',#48842,#48843,#48844); +#48842 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48843 = DIRECTION('',(-0.,-1.,-0.)); +#48844 = DIRECTION('',(-1.,0.,0.)); +#48845 = ADVANCED_FACE('',(#48846),#48864,.F.); +#48846 = FACE_BOUND('',#48847,.T.); +#48847 = EDGE_LOOP('',(#48848,#48849,#48857,#48863)); +#48848 = ORIENTED_EDGE('',*,*,#48637,.F.); +#48849 = ORIENTED_EDGE('',*,*,#48850,.T.); +#48850 = EDGE_CURVE('',#48629,#48851,#48853,.T.); +#48851 = VERTEX_POINT('',#48852); +#48852 = CARTESIAN_POINT('',(9.,2.445,0.4)); +#48853 = LINE('',#48854,#48855); +#48854 = CARTESIAN_POINT('',(9.,2.445,0.8)); +#48855 = VECTOR('',#48856,1.); +#48856 = DIRECTION('',(0.,0.,1.)); +#48857 = ORIENTED_EDGE('',*,*,#48858,.T.); +#48858 = EDGE_CURVE('',#48851,#48827,#48859,.T.); +#48859 = LINE('',#48860,#48861); +#48860 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48861 = VECTOR('',#48862,1.); +#48862 = DIRECTION('',(-0.,-1.,-0.)); +#48863 = ORIENTED_EDGE('',*,*,#48834,.F.); +#48864 = PLANE('',#48865); +#48865 = AXIS2_PLACEMENT_3D('',#48866,#48867,#48868); +#48866 = CARTESIAN_POINT('',(9.,3.17,0.)); +#48867 = DIRECTION('',(-1.,-0.,-0.)); +#48868 = DIRECTION('',(0.,1.,0.)); +#48869 = ADVANCED_FACE('',(#48870),#48890,.F.); +#48870 = FACE_BOUND('',#48871,.F.); +#48871 = EDGE_LOOP('',(#48872,#48873,#48874,#48882,#48889)); +#48872 = ORIENTED_EDGE('',*,*,#48628,.F.); +#48873 = ORIENTED_EDGE('',*,*,#48850,.T.); +#48874 = ORIENTED_EDGE('',*,*,#48875,.T.); +#48875 = EDGE_CURVE('',#48851,#48876,#48878,.T.); +#48876 = VERTEX_POINT('',#48877); +#48877 = CARTESIAN_POINT('',(9.,2.445,0.8)); +#48878 = LINE('',#48879,#48880); +#48879 = CARTESIAN_POINT('',(9.,2.445,0.8)); +#48880 = VECTOR('',#48881,1.); +#48881 = DIRECTION('',(0.,0.,1.)); +#48882 = ORIENTED_EDGE('',*,*,#48883,.T.); +#48883 = EDGE_CURVE('',#48876,#48709,#48884,.T.); +#48884 = CIRCLE('',#48885,0.275); +#48885 = AXIS2_PLACEMENT_3D('',#48886,#48887,#48888); +#48886 = CARTESIAN_POINT('',(9.,2.72,0.8)); +#48887 = DIRECTION('',(0.,0.,-1.)); +#48888 = DIRECTION('',(-1.,-0.,-0.)); +#48889 = ORIENTED_EDGE('',*,*,#48708,.T.); +#48890 = CYLINDRICAL_SURFACE('',#48891,0.275); +#48891 = AXIS2_PLACEMENT_3D('',#48892,#48893,#48894); +#48892 = CARTESIAN_POINT('',(9.,2.72,0.8)); +#48893 = DIRECTION('',(0.,0.,1.)); +#48894 = DIRECTION('',(-1.,0.,0.)); +#48895 = ADVANCED_FACE('',(#48896),#48914,.T.); +#48896 = FACE_BOUND('',#48897,.F.); +#48897 = EDGE_LOOP('',(#48898,#48899,#48907,#48913)); +#48898 = ORIENTED_EDGE('',*,*,#48683,.T.); +#48899 = ORIENTED_EDGE('',*,*,#48900,.T.); +#48900 = EDGE_CURVE('',#48676,#48901,#48903,.T.); +#48901 = VERTEX_POINT('',#48902); +#48902 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#48903 = LINE('',#48904,#48905); +#48904 = CARTESIAN_POINT('',(8.55,3.17,0.8)); +#48905 = VECTOR('',#48906,1.); +#48906 = DIRECTION('',(-0.,-1.,-0.)); +#48907 = ORIENTED_EDGE('',*,*,#48908,.F.); +#48908 = EDGE_CURVE('',#48782,#48901,#48909,.T.); +#48909 = LINE('',#48910,#48911); +#48910 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#48911 = VECTOR('',#48912,1.); +#48912 = DIRECTION('',(0.,0.,1.)); +#48913 = ORIENTED_EDGE('',*,*,#48789,.F.); +#48914 = PLANE('',#48915); +#48915 = AXIS2_PLACEMENT_3D('',#48916,#48917,#48918); +#48916 = CARTESIAN_POINT('',(8.55,3.17,0.4)); +#48917 = DIRECTION('',(-1.,-0.,-0.)); +#48918 = DIRECTION('',(0.,1.,0.)); +#48919 = ADVANCED_FACE('',(#48920),#48941,.T.); +#48920 = FACE_BOUND('',#48921,.F.); +#48921 = EDGE_LOOP('',(#48922,#48923,#48924,#48925,#48926,#48934,#48940) + ); +#48922 = ORIENTED_EDGE('',*,*,#48675,.F.); +#48923 = ORIENTED_EDGE('',*,*,#48733,.T.); +#48924 = ORIENTED_EDGE('',*,*,#48716,.F.); +#48925 = ORIENTED_EDGE('',*,*,#48883,.F.); +#48926 = ORIENTED_EDGE('',*,*,#48927,.T.); +#48927 = EDGE_CURVE('',#48876,#48928,#48930,.T.); +#48928 = VERTEX_POINT('',#48929); +#48929 = CARTESIAN_POINT('',(9.,2.27,0.8)); +#48930 = LINE('',#48931,#48932); +#48931 = CARTESIAN_POINT('',(9.,3.17,0.8)); +#48932 = VECTOR('',#48933,1.); +#48933 = DIRECTION('',(-0.,-1.,-0.)); +#48934 = ORIENTED_EDGE('',*,*,#48935,.F.); +#48935 = EDGE_CURVE('',#48901,#48928,#48936,.T.); +#48936 = LINE('',#48937,#48938); +#48937 = CARTESIAN_POINT('',(8.55,2.27,0.8)); +#48938 = VECTOR('',#48939,1.); +#48939 = DIRECTION('',(1.,0.,0.)); +#48940 = ORIENTED_EDGE('',*,*,#48900,.F.); +#48941 = PLANE('',#48942); +#48942 = AXIS2_PLACEMENT_3D('',#48943,#48944,#48945); +#48943 = CARTESIAN_POINT('',(8.775,2.72,0.8)); +#48944 = DIRECTION('',(0.,0.,1.)); +#48945 = DIRECTION('',(1.,0.,-0.)); +#48946 = ADVANCED_FACE('',(#48947),#48953,.T.); +#48947 = FACE_BOUND('',#48948,.F.); +#48948 = EDGE_LOOP('',(#48949,#48950,#48951,#48952)); +#48949 = ORIENTED_EDGE('',*,*,#48757,.T.); +#48950 = ORIENTED_EDGE('',*,*,#48805,.T.); +#48951 = ORIENTED_EDGE('',*,*,#48781,.F.); +#48952 = ORIENTED_EDGE('',*,*,#48820,.F.); +#48953 = PLANE('',#48954); +#48954 = AXIS2_PLACEMENT_3D('',#48955,#48956,#48957); +#48955 = CARTESIAN_POINT('',(8.55,2.27,0.)); +#48956 = DIRECTION('',(-0.,-1.,-0.)); +#48957 = DIRECTION('',(0.,0.,-1.)); +#48958 = ADVANCED_FACE('',(#48959),#48970,.T.); +#48959 = FACE_BOUND('',#48960,.F.); +#48960 = EDGE_LOOP('',(#48961,#48962,#48963,#48969)); +#48961 = ORIENTED_EDGE('',*,*,#48908,.T.); +#48962 = ORIENTED_EDGE('',*,*,#48935,.T.); +#48963 = ORIENTED_EDGE('',*,*,#48964,.F.); +#48964 = EDGE_CURVE('',#48827,#48928,#48965,.T.); +#48965 = LINE('',#48966,#48967); +#48966 = CARTESIAN_POINT('',(9.,2.27,0.4)); +#48967 = VECTOR('',#48968,1.); +#48968 = DIRECTION('',(0.,0.,1.)); +#48969 = ORIENTED_EDGE('',*,*,#48826,.F.); +#48970 = PLANE('',#48971); +#48971 = AXIS2_PLACEMENT_3D('',#48972,#48973,#48974); +#48972 = CARTESIAN_POINT('',(8.55,2.27,0.4)); +#48973 = DIRECTION('',(-0.,-1.,-0.)); +#48974 = DIRECTION('',(-1.,0.,0.)); +#48975 = ADVANCED_FACE('',(#48976),#48982,.F.); +#48976 = FACE_BOUND('',#48977,.T.); +#48977 = EDGE_LOOP('',(#48978,#48979,#48980,#48981)); +#48978 = ORIENTED_EDGE('',*,*,#48858,.F.); +#48979 = ORIENTED_EDGE('',*,*,#48875,.T.); +#48980 = ORIENTED_EDGE('',*,*,#48927,.T.); +#48981 = ORIENTED_EDGE('',*,*,#48964,.F.); +#48982 = PLANE('',#48983); +#48983 = AXIS2_PLACEMENT_3D('',#48984,#48985,#48986); +#48984 = CARTESIAN_POINT('',(9.,3.17,0.4)); +#48985 = DIRECTION('',(-1.,-0.,-0.)); +#48986 = DIRECTION('',(0.,1.,0.)); +#48987 = MANIFOLD_SOLID_BREP('',#48988); +#48988 = CLOSED_SHELL('',(#48989,#49029,#49060,#49091,#49141,#49172, + #49205,#49222,#49246,#49277,#49294,#49323,#49347,#49373,#49397, + #49424,#49436,#49453)); +#48989 = ADVANCED_FACE('',(#48990),#49024,.T.); +#48990 = FACE_BOUND('',#48991,.F.); +#48991 = EDGE_LOOP('',(#48992,#49002,#49010,#49018)); +#48992 = ORIENTED_EDGE('',*,*,#48993,.T.); +#48993 = EDGE_CURVE('',#48994,#48996,#48998,.T.); +#48994 = VERTEX_POINT('',#48995); +#48995 = CARTESIAN_POINT('',(9.,1.9,0.)); +#48996 = VERTEX_POINT('',#48997); +#48997 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#48998 = LINE('',#48999,#49000); +#48999 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49000 = VECTOR('',#49001,1.); +#49001 = DIRECTION('',(0.,0.,1.)); +#49002 = ORIENTED_EDGE('',*,*,#49003,.T.); +#49003 = EDGE_CURVE('',#48996,#49004,#49006,.T.); +#49004 = VERTEX_POINT('',#49005); +#49005 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49006 = LINE('',#49007,#49008); +#49007 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49008 = VECTOR('',#49009,1.); +#49009 = DIRECTION('',(-1.,-0.,-0.)); +#49010 = ORIENTED_EDGE('',*,*,#49011,.F.); +#49011 = EDGE_CURVE('',#49012,#49004,#49014,.T.); +#49012 = VERTEX_POINT('',#49013); +#49013 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49014 = LINE('',#49015,#49016); +#49015 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49016 = VECTOR('',#49017,1.); +#49017 = DIRECTION('',(0.,0.,1.)); +#49018 = ORIENTED_EDGE('',*,*,#49019,.F.); +#49019 = EDGE_CURVE('',#48994,#49012,#49020,.T.); +#49020 = LINE('',#49021,#49022); +#49021 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49022 = VECTOR('',#49023,1.); +#49023 = DIRECTION('',(-1.,-0.,-0.)); +#49024 = PLANE('',#49025); +#49025 = AXIS2_PLACEMENT_3D('',#49026,#49027,#49028); +#49026 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49027 = DIRECTION('',(0.,1.,0.)); +#49028 = DIRECTION('',(1.,0.,0.)); +#49029 = ADVANCED_FACE('',(#49030),#49055,.F.); +#49030 = FACE_BOUND('',#49031,.T.); +#49031 = EDGE_LOOP('',(#49032,#49040,#49041,#49049)); +#49032 = ORIENTED_EDGE('',*,*,#49033,.F.); +#49033 = EDGE_CURVE('',#48994,#49034,#49036,.T.); +#49034 = VERTEX_POINT('',#49035); +#49035 = CARTESIAN_POINT('',(9.,1.725,0.)); +#49036 = LINE('',#49037,#49038); +#49037 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49038 = VECTOR('',#49039,1.); +#49039 = DIRECTION('',(-0.,-1.,-0.)); +#49040 = ORIENTED_EDGE('',*,*,#48993,.T.); +#49041 = ORIENTED_EDGE('',*,*,#49042,.T.); +#49042 = EDGE_CURVE('',#48996,#49043,#49045,.T.); +#49043 = VERTEX_POINT('',#49044); +#49044 = CARTESIAN_POINT('',(9.,1.725,0.4)); +#49045 = LINE('',#49046,#49047); +#49046 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49047 = VECTOR('',#49048,1.); +#49048 = DIRECTION('',(-0.,-1.,-0.)); +#49049 = ORIENTED_EDGE('',*,*,#49050,.F.); +#49050 = EDGE_CURVE('',#49034,#49043,#49051,.T.); +#49051 = LINE('',#49052,#49053); +#49052 = CARTESIAN_POINT('',(9.,1.725,0.8)); +#49053 = VECTOR('',#49054,1.); +#49054 = DIRECTION('',(0.,0.,1.)); +#49055 = PLANE('',#49056); +#49056 = AXIS2_PLACEMENT_3D('',#49057,#49058,#49059); +#49057 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49058 = DIRECTION('',(-1.,-0.,-0.)); +#49059 = DIRECTION('',(0.,1.,0.)); +#49060 = ADVANCED_FACE('',(#49061),#49086,.F.); +#49061 = FACE_BOUND('',#49062,.T.); +#49062 = EDGE_LOOP('',(#49063,#49071,#49079,#49085)); +#49063 = ORIENTED_EDGE('',*,*,#49064,.T.); +#49064 = EDGE_CURVE('',#49012,#49065,#49067,.T.); +#49065 = VERTEX_POINT('',#49066); +#49066 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#49067 = LINE('',#49068,#49069); +#49068 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49069 = VECTOR('',#49070,1.); +#49070 = DIRECTION('',(-1.,-0.,-0.)); +#49071 = ORIENTED_EDGE('',*,*,#49072,.T.); +#49072 = EDGE_CURVE('',#49065,#49073,#49075,.T.); +#49073 = VERTEX_POINT('',#49074); +#49074 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#49075 = LINE('',#49076,#49077); +#49076 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#49077 = VECTOR('',#49078,1.); +#49078 = DIRECTION('',(0.,0.,1.)); +#49079 = ORIENTED_EDGE('',*,*,#49080,.F.); +#49080 = EDGE_CURVE('',#49004,#49073,#49081,.T.); +#49081 = LINE('',#49082,#49083); +#49082 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49083 = VECTOR('',#49084,1.); +#49084 = DIRECTION('',(-1.,-0.,-0.)); +#49085 = ORIENTED_EDGE('',*,*,#49011,.F.); +#49086 = PLANE('',#49087); +#49087 = AXIS2_PLACEMENT_3D('',#49088,#49089,#49090); +#49088 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49089 = DIRECTION('',(-0.,-1.,-0.)); +#49090 = DIRECTION('',(0.,0.,-1.)); +#49091 = ADVANCED_FACE('',(#49092),#49136,.F.); +#49092 = FACE_BOUND('',#49093,.T.); +#49093 = EDGE_LOOP('',(#49094,#49095,#49096,#49105,#49114,#49122,#49130) + ); +#49094 = ORIENTED_EDGE('',*,*,#49019,.F.); +#49095 = ORIENTED_EDGE('',*,*,#49033,.T.); +#49096 = ORIENTED_EDGE('',*,*,#49097,.F.); +#49097 = EDGE_CURVE('',#49098,#49034,#49100,.T.); +#49098 = VERTEX_POINT('',#49099); +#49099 = CARTESIAN_POINT('',(8.725,1.45,0.)); +#49100 = CIRCLE('',#49101,0.275); +#49101 = AXIS2_PLACEMENT_3D('',#49102,#49103,#49104); +#49102 = CARTESIAN_POINT('',(9.,1.45,0.)); +#49103 = DIRECTION('',(0.,0.,-1.)); +#49104 = DIRECTION('',(-1.,-0.,-0.)); +#49105 = ORIENTED_EDGE('',*,*,#49106,.F.); +#49106 = EDGE_CURVE('',#49107,#49098,#49109,.T.); +#49107 = VERTEX_POINT('',#49108); +#49108 = CARTESIAN_POINT('',(9.,1.175,0.)); +#49109 = CIRCLE('',#49110,0.275); +#49110 = AXIS2_PLACEMENT_3D('',#49111,#49112,#49113); +#49111 = CARTESIAN_POINT('',(9.,1.45,0.)); +#49112 = DIRECTION('',(0.,0.,-1.)); +#49113 = DIRECTION('',(-1.,-0.,-0.)); +#49114 = ORIENTED_EDGE('',*,*,#49115,.T.); +#49115 = EDGE_CURVE('',#49107,#49116,#49118,.T.); +#49116 = VERTEX_POINT('',#49117); +#49117 = CARTESIAN_POINT('',(9.,1.,0.)); +#49118 = LINE('',#49119,#49120); +#49119 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49120 = VECTOR('',#49121,1.); +#49121 = DIRECTION('',(-0.,-1.,-0.)); +#49122 = ORIENTED_EDGE('',*,*,#49123,.F.); +#49123 = EDGE_CURVE('',#49124,#49116,#49126,.T.); +#49124 = VERTEX_POINT('',#49125); +#49125 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49126 = LINE('',#49127,#49128); +#49127 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49128 = VECTOR('',#49129,1.); +#49129 = DIRECTION('',(1.,0.,0.)); +#49130 = ORIENTED_EDGE('',*,*,#49131,.F.); +#49131 = EDGE_CURVE('',#49012,#49124,#49132,.T.); +#49132 = LINE('',#49133,#49134); +#49133 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49134 = VECTOR('',#49135,1.); +#49135 = DIRECTION('',(-0.,-1.,-0.)); +#49136 = PLANE('',#49137); +#49137 = AXIS2_PLACEMENT_3D('',#49138,#49139,#49140); +#49138 = CARTESIAN_POINT('',(8.775,1.45,0.)); +#49139 = DIRECTION('',(0.,0.,1.)); +#49140 = DIRECTION('',(1.,0.,-0.)); +#49141 = ADVANCED_FACE('',(#49142),#49167,.T.); +#49142 = FACE_BOUND('',#49143,.F.); +#49143 = EDGE_LOOP('',(#49144,#49152,#49160,#49166)); +#49144 = ORIENTED_EDGE('',*,*,#49145,.T.); +#49145 = EDGE_CURVE('',#48996,#49146,#49148,.T.); +#49146 = VERTEX_POINT('',#49147); +#49147 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#49148 = LINE('',#49149,#49150); +#49149 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49150 = VECTOR('',#49151,1.); +#49151 = DIRECTION('',(0.,0.,1.)); +#49152 = ORIENTED_EDGE('',*,*,#49153,.T.); +#49153 = EDGE_CURVE('',#49146,#49154,#49156,.T.); +#49154 = VERTEX_POINT('',#49155); +#49155 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#49156 = LINE('',#49157,#49158); +#49157 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#49158 = VECTOR('',#49159,1.); +#49159 = DIRECTION('',(-1.,-0.,-0.)); +#49160 = ORIENTED_EDGE('',*,*,#49161,.F.); +#49161 = EDGE_CURVE('',#49004,#49154,#49162,.T.); +#49162 = LINE('',#49163,#49164); +#49163 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49164 = VECTOR('',#49165,1.); +#49165 = DIRECTION('',(0.,0.,1.)); +#49166 = ORIENTED_EDGE('',*,*,#49003,.F.); +#49167 = PLANE('',#49168); +#49168 = AXIS2_PLACEMENT_3D('',#49169,#49170,#49171); +#49169 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49170 = DIRECTION('',(0.,1.,0.)); +#49171 = DIRECTION('',(1.,0.,0.)); +#49172 = ADVANCED_FACE('',(#49173),#49200,.F.); +#49173 = FACE_BOUND('',#49174,.F.); +#49174 = EDGE_LOOP('',(#49175,#49183,#49184,#49185,#49193)); +#49175 = ORIENTED_EDGE('',*,*,#49176,.F.); +#49176 = EDGE_CURVE('',#49043,#49177,#49179,.T.); +#49177 = VERTEX_POINT('',#49178); +#49178 = CARTESIAN_POINT('',(9.,1.725,0.8)); +#49179 = LINE('',#49180,#49181); +#49180 = CARTESIAN_POINT('',(9.,1.725,0.8)); +#49181 = VECTOR('',#49182,1.); +#49182 = DIRECTION('',(0.,0.,1.)); +#49183 = ORIENTED_EDGE('',*,*,#49050,.F.); +#49184 = ORIENTED_EDGE('',*,*,#49097,.F.); +#49185 = ORIENTED_EDGE('',*,*,#49186,.F.); +#49186 = EDGE_CURVE('',#49187,#49098,#49189,.T.); +#49187 = VERTEX_POINT('',#49188); +#49188 = CARTESIAN_POINT('',(8.725,1.45,0.8)); +#49189 = LINE('',#49190,#49191); +#49190 = CARTESIAN_POINT('',(8.725,1.45,0.8)); +#49191 = VECTOR('',#49192,1.); +#49192 = DIRECTION('',(0.,0.,-1.)); +#49193 = ORIENTED_EDGE('',*,*,#49194,.T.); +#49194 = EDGE_CURVE('',#49187,#49177,#49195,.T.); +#49195 = CIRCLE('',#49196,0.275); +#49196 = AXIS2_PLACEMENT_3D('',#49197,#49198,#49199); +#49197 = CARTESIAN_POINT('',(9.,1.45,0.8)); +#49198 = DIRECTION('',(0.,0.,-1.)); +#49199 = DIRECTION('',(-1.,-0.,-0.)); +#49200 = CYLINDRICAL_SURFACE('',#49201,0.275); +#49201 = AXIS2_PLACEMENT_3D('',#49202,#49203,#49204); +#49202 = CARTESIAN_POINT('',(9.,1.45,0.8)); +#49203 = DIRECTION('',(0.,0.,1.)); +#49204 = DIRECTION('',(-1.,0.,0.)); +#49205 = ADVANCED_FACE('',(#49206),#49217,.F.); +#49206 = FACE_BOUND('',#49207,.T.); +#49207 = EDGE_LOOP('',(#49208,#49209,#49210,#49216)); +#49208 = ORIENTED_EDGE('',*,*,#49042,.F.); +#49209 = ORIENTED_EDGE('',*,*,#49145,.T.); +#49210 = ORIENTED_EDGE('',*,*,#49211,.T.); +#49211 = EDGE_CURVE('',#49146,#49177,#49212,.T.); +#49212 = LINE('',#49213,#49214); +#49213 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#49214 = VECTOR('',#49215,1.); +#49215 = DIRECTION('',(-0.,-1.,-0.)); +#49216 = ORIENTED_EDGE('',*,*,#49176,.F.); +#49217 = PLANE('',#49218); +#49218 = AXIS2_PLACEMENT_3D('',#49219,#49220,#49221); +#49219 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49220 = DIRECTION('',(-1.,-0.,-0.)); +#49221 = DIRECTION('',(0.,1.,0.)); +#49222 = ADVANCED_FACE('',(#49223),#49241,.T.); +#49223 = FACE_BOUND('',#49224,.F.); +#49224 = EDGE_LOOP('',(#49225,#49226,#49234,#49240)); +#49225 = ORIENTED_EDGE('',*,*,#49064,.T.); +#49226 = ORIENTED_EDGE('',*,*,#49227,.T.); +#49227 = EDGE_CURVE('',#49065,#49228,#49230,.T.); +#49228 = VERTEX_POINT('',#49229); +#49229 = CARTESIAN_POINT('',(8.15,1.,0.)); +#49230 = LINE('',#49231,#49232); +#49231 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#49232 = VECTOR('',#49233,1.); +#49233 = DIRECTION('',(-0.,-1.,-0.)); +#49234 = ORIENTED_EDGE('',*,*,#49235,.F.); +#49235 = EDGE_CURVE('',#49124,#49228,#49236,.T.); +#49236 = LINE('',#49237,#49238); +#49237 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49238 = VECTOR('',#49239,1.); +#49239 = DIRECTION('',(-1.,-0.,-0.)); +#49240 = ORIENTED_EDGE('',*,*,#49131,.F.); +#49241 = PLANE('',#49242); +#49242 = AXIS2_PLACEMENT_3D('',#49243,#49244,#49245); +#49243 = CARTESIAN_POINT('',(8.55,1.9,0.)); +#49244 = DIRECTION('',(-0.,-0.,-1.)); +#49245 = DIRECTION('',(0.,1.,-0.)); +#49246 = ADVANCED_FACE('',(#49247),#49272,.F.); +#49247 = FACE_BOUND('',#49248,.T.); +#49248 = EDGE_LOOP('',(#49249,#49250,#49258,#49266)); +#49249 = ORIENTED_EDGE('',*,*,#49080,.T.); +#49250 = ORIENTED_EDGE('',*,*,#49251,.T.); +#49251 = EDGE_CURVE('',#49073,#49252,#49254,.T.); +#49252 = VERTEX_POINT('',#49253); +#49253 = CARTESIAN_POINT('',(8.15,1.,0.4)); +#49254 = LINE('',#49255,#49256); +#49255 = CARTESIAN_POINT('',(8.15,1.9,0.4)); +#49256 = VECTOR('',#49257,1.); +#49257 = DIRECTION('',(-0.,-1.,-0.)); +#49258 = ORIENTED_EDGE('',*,*,#49259,.F.); +#49259 = EDGE_CURVE('',#49260,#49252,#49262,.T.); +#49260 = VERTEX_POINT('',#49261); +#49261 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#49262 = LINE('',#49263,#49264); +#49263 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#49264 = VECTOR('',#49265,1.); +#49265 = DIRECTION('',(-1.,-0.,-0.)); +#49266 = ORIENTED_EDGE('',*,*,#49267,.F.); +#49267 = EDGE_CURVE('',#49004,#49260,#49268,.T.); +#49268 = LINE('',#49269,#49270); +#49269 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49270 = VECTOR('',#49271,1.); +#49271 = DIRECTION('',(-0.,-1.,-0.)); +#49272 = PLANE('',#49273); +#49273 = AXIS2_PLACEMENT_3D('',#49274,#49275,#49276); +#49274 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49275 = DIRECTION('',(-0.,-0.,-1.)); +#49276 = DIRECTION('',(0.,1.,-0.)); +#49277 = ADVANCED_FACE('',(#49278),#49289,.T.); +#49278 = FACE_BOUND('',#49279,.F.); +#49279 = EDGE_LOOP('',(#49280,#49281,#49282,#49288)); +#49280 = ORIENTED_EDGE('',*,*,#49072,.T.); +#49281 = ORIENTED_EDGE('',*,*,#49251,.T.); +#49282 = ORIENTED_EDGE('',*,*,#49283,.F.); +#49283 = EDGE_CURVE('',#49228,#49252,#49284,.T.); +#49284 = LINE('',#49285,#49286); +#49285 = CARTESIAN_POINT('',(8.15,1.,0.)); +#49286 = VECTOR('',#49287,1.); +#49287 = DIRECTION('',(0.,0.,1.)); +#49288 = ORIENTED_EDGE('',*,*,#49227,.F.); +#49289 = PLANE('',#49290); +#49290 = AXIS2_PLACEMENT_3D('',#49291,#49292,#49293); +#49291 = CARTESIAN_POINT('',(8.15,1.9,0.)); +#49292 = DIRECTION('',(-1.,-0.,-0.)); +#49293 = DIRECTION('',(0.,1.,0.)); +#49294 = ADVANCED_FACE('',(#49295),#49318,.T.); +#49295 = FACE_BOUND('',#49296,.F.); +#49296 = EDGE_LOOP('',(#49297,#49303,#49311,#49317)); +#49297 = ORIENTED_EDGE('',*,*,#49298,.T.); +#49298 = EDGE_CURVE('',#49124,#49260,#49299,.T.); +#49299 = LINE('',#49300,#49301); +#49300 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49301 = VECTOR('',#49302,1.); +#49302 = DIRECTION('',(0.,0.,1.)); +#49303 = ORIENTED_EDGE('',*,*,#49304,.T.); +#49304 = EDGE_CURVE('',#49260,#49305,#49307,.T.); +#49305 = VERTEX_POINT('',#49306); +#49306 = CARTESIAN_POINT('',(9.,1.,0.4)); +#49307 = LINE('',#49308,#49309); +#49308 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#49309 = VECTOR('',#49310,1.); +#49310 = DIRECTION('',(1.,0.,0.)); +#49311 = ORIENTED_EDGE('',*,*,#49312,.F.); +#49312 = EDGE_CURVE('',#49116,#49305,#49313,.T.); +#49313 = LINE('',#49314,#49315); +#49314 = CARTESIAN_POINT('',(9.,1.,0.)); +#49315 = VECTOR('',#49316,1.); +#49316 = DIRECTION('',(0.,0.,1.)); +#49317 = ORIENTED_EDGE('',*,*,#49123,.F.); +#49318 = PLANE('',#49319); +#49319 = AXIS2_PLACEMENT_3D('',#49320,#49321,#49322); +#49320 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49321 = DIRECTION('',(-0.,-1.,-0.)); +#49322 = DIRECTION('',(-1.,0.,0.)); +#49323 = ADVANCED_FACE('',(#49324),#49342,.F.); +#49324 = FACE_BOUND('',#49325,.T.); +#49325 = EDGE_LOOP('',(#49326,#49327,#49335,#49341)); +#49326 = ORIENTED_EDGE('',*,*,#49115,.F.); +#49327 = ORIENTED_EDGE('',*,*,#49328,.T.); +#49328 = EDGE_CURVE('',#49107,#49329,#49331,.T.); +#49329 = VERTEX_POINT('',#49330); +#49330 = CARTESIAN_POINT('',(9.,1.175,0.4)); +#49331 = LINE('',#49332,#49333); +#49332 = CARTESIAN_POINT('',(9.,1.175,0.8)); +#49333 = VECTOR('',#49334,1.); +#49334 = DIRECTION('',(0.,0.,1.)); +#49335 = ORIENTED_EDGE('',*,*,#49336,.T.); +#49336 = EDGE_CURVE('',#49329,#49305,#49337,.T.); +#49337 = LINE('',#49338,#49339); +#49338 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49339 = VECTOR('',#49340,1.); +#49340 = DIRECTION('',(-0.,-1.,-0.)); +#49341 = ORIENTED_EDGE('',*,*,#49312,.F.); +#49342 = PLANE('',#49343); +#49343 = AXIS2_PLACEMENT_3D('',#49344,#49345,#49346); +#49344 = CARTESIAN_POINT('',(9.,1.9,0.)); +#49345 = DIRECTION('',(-1.,-0.,-0.)); +#49346 = DIRECTION('',(0.,1.,0.)); +#49347 = ADVANCED_FACE('',(#49348),#49368,.F.); +#49348 = FACE_BOUND('',#49349,.F.); +#49349 = EDGE_LOOP('',(#49350,#49351,#49352,#49360,#49367)); +#49350 = ORIENTED_EDGE('',*,*,#49106,.F.); +#49351 = ORIENTED_EDGE('',*,*,#49328,.T.); +#49352 = ORIENTED_EDGE('',*,*,#49353,.T.); +#49353 = EDGE_CURVE('',#49329,#49354,#49356,.T.); +#49354 = VERTEX_POINT('',#49355); +#49355 = CARTESIAN_POINT('',(9.,1.175,0.8)); +#49356 = LINE('',#49357,#49358); +#49357 = CARTESIAN_POINT('',(9.,1.175,0.8)); +#49358 = VECTOR('',#49359,1.); +#49359 = DIRECTION('',(0.,0.,1.)); +#49360 = ORIENTED_EDGE('',*,*,#49361,.T.); +#49361 = EDGE_CURVE('',#49354,#49187,#49362,.T.); +#49362 = CIRCLE('',#49363,0.275); +#49363 = AXIS2_PLACEMENT_3D('',#49364,#49365,#49366); +#49364 = CARTESIAN_POINT('',(9.,1.45,0.8)); +#49365 = DIRECTION('',(0.,0.,-1.)); +#49366 = DIRECTION('',(-1.,-0.,-0.)); +#49367 = ORIENTED_EDGE('',*,*,#49186,.T.); +#49368 = CYLINDRICAL_SURFACE('',#49369,0.275); +#49369 = AXIS2_PLACEMENT_3D('',#49370,#49371,#49372); +#49370 = CARTESIAN_POINT('',(9.,1.45,0.8)); +#49371 = DIRECTION('',(0.,0.,1.)); +#49372 = DIRECTION('',(-1.,0.,0.)); +#49373 = ADVANCED_FACE('',(#49374),#49392,.T.); +#49374 = FACE_BOUND('',#49375,.F.); +#49375 = EDGE_LOOP('',(#49376,#49377,#49385,#49391)); +#49376 = ORIENTED_EDGE('',*,*,#49161,.T.); +#49377 = ORIENTED_EDGE('',*,*,#49378,.T.); +#49378 = EDGE_CURVE('',#49154,#49379,#49381,.T.); +#49379 = VERTEX_POINT('',#49380); +#49380 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#49381 = LINE('',#49382,#49383); +#49382 = CARTESIAN_POINT('',(8.55,1.9,0.8)); +#49383 = VECTOR('',#49384,1.); +#49384 = DIRECTION('',(-0.,-1.,-0.)); +#49385 = ORIENTED_EDGE('',*,*,#49386,.F.); +#49386 = EDGE_CURVE('',#49260,#49379,#49387,.T.); +#49387 = LINE('',#49388,#49389); +#49388 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#49389 = VECTOR('',#49390,1.); +#49390 = DIRECTION('',(0.,0.,1.)); +#49391 = ORIENTED_EDGE('',*,*,#49267,.F.); +#49392 = PLANE('',#49393); +#49393 = AXIS2_PLACEMENT_3D('',#49394,#49395,#49396); +#49394 = CARTESIAN_POINT('',(8.55,1.9,0.4)); +#49395 = DIRECTION('',(-1.,-0.,-0.)); +#49396 = DIRECTION('',(0.,1.,0.)); +#49397 = ADVANCED_FACE('',(#49398),#49419,.T.); +#49398 = FACE_BOUND('',#49399,.F.); +#49399 = EDGE_LOOP('',(#49400,#49401,#49402,#49403,#49404,#49412,#49418) + ); +#49400 = ORIENTED_EDGE('',*,*,#49153,.F.); +#49401 = ORIENTED_EDGE('',*,*,#49211,.T.); +#49402 = ORIENTED_EDGE('',*,*,#49194,.F.); +#49403 = ORIENTED_EDGE('',*,*,#49361,.F.); +#49404 = ORIENTED_EDGE('',*,*,#49405,.T.); +#49405 = EDGE_CURVE('',#49354,#49406,#49408,.T.); +#49406 = VERTEX_POINT('',#49407); +#49407 = CARTESIAN_POINT('',(9.,1.,0.8)); +#49408 = LINE('',#49409,#49410); +#49409 = CARTESIAN_POINT('',(9.,1.9,0.8)); +#49410 = VECTOR('',#49411,1.); +#49411 = DIRECTION('',(-0.,-1.,-0.)); +#49412 = ORIENTED_EDGE('',*,*,#49413,.F.); +#49413 = EDGE_CURVE('',#49379,#49406,#49414,.T.); +#49414 = LINE('',#49415,#49416); +#49415 = CARTESIAN_POINT('',(8.55,1.,0.8)); +#49416 = VECTOR('',#49417,1.); +#49417 = DIRECTION('',(1.,0.,0.)); +#49418 = ORIENTED_EDGE('',*,*,#49378,.F.); +#49419 = PLANE('',#49420); +#49420 = AXIS2_PLACEMENT_3D('',#49421,#49422,#49423); +#49421 = CARTESIAN_POINT('',(8.775,1.45,0.8)); +#49422 = DIRECTION('',(0.,0.,1.)); +#49423 = DIRECTION('',(1.,0.,-0.)); +#49424 = ADVANCED_FACE('',(#49425),#49431,.T.); +#49425 = FACE_BOUND('',#49426,.F.); +#49426 = EDGE_LOOP('',(#49427,#49428,#49429,#49430)); +#49427 = ORIENTED_EDGE('',*,*,#49235,.T.); +#49428 = ORIENTED_EDGE('',*,*,#49283,.T.); +#49429 = ORIENTED_EDGE('',*,*,#49259,.F.); +#49430 = ORIENTED_EDGE('',*,*,#49298,.F.); +#49431 = PLANE('',#49432); +#49432 = AXIS2_PLACEMENT_3D('',#49433,#49434,#49435); +#49433 = CARTESIAN_POINT('',(8.55,1.,0.)); +#49434 = DIRECTION('',(-0.,-1.,-0.)); +#49435 = DIRECTION('',(0.,0.,-1.)); +#49436 = ADVANCED_FACE('',(#49437),#49448,.T.); +#49437 = FACE_BOUND('',#49438,.F.); +#49438 = EDGE_LOOP('',(#49439,#49440,#49441,#49447)); +#49439 = ORIENTED_EDGE('',*,*,#49386,.T.); +#49440 = ORIENTED_EDGE('',*,*,#49413,.T.); +#49441 = ORIENTED_EDGE('',*,*,#49442,.F.); +#49442 = EDGE_CURVE('',#49305,#49406,#49443,.T.); +#49443 = LINE('',#49444,#49445); +#49444 = CARTESIAN_POINT('',(9.,1.,0.4)); +#49445 = VECTOR('',#49446,1.); +#49446 = DIRECTION('',(0.,0.,1.)); +#49447 = ORIENTED_EDGE('',*,*,#49304,.F.); +#49448 = PLANE('',#49449); +#49449 = AXIS2_PLACEMENT_3D('',#49450,#49451,#49452); +#49450 = CARTESIAN_POINT('',(8.55,1.,0.4)); +#49451 = DIRECTION('',(-0.,-1.,-0.)); +#49452 = DIRECTION('',(-1.,0.,0.)); +#49453 = ADVANCED_FACE('',(#49454),#49460,.F.); +#49454 = FACE_BOUND('',#49455,.T.); +#49455 = EDGE_LOOP('',(#49456,#49457,#49458,#49459)); +#49456 = ORIENTED_EDGE('',*,*,#49336,.F.); +#49457 = ORIENTED_EDGE('',*,*,#49353,.T.); +#49458 = ORIENTED_EDGE('',*,*,#49405,.T.); +#49459 = ORIENTED_EDGE('',*,*,#49442,.F.); +#49460 = PLANE('',#49461); +#49461 = AXIS2_PLACEMENT_3D('',#49462,#49463,#49464); +#49462 = CARTESIAN_POINT('',(9.,1.9,0.4)); +#49463 = DIRECTION('',(-1.,-0.,-0.)); +#49464 = DIRECTION('',(0.,1.,0.)); +#49465 = MANIFOLD_SOLID_BREP('',#49466); +#49466 = CLOSED_SHELL('',(#49467,#49507,#49538,#49569,#49619,#49650, + #49683,#49700,#49724,#49755,#49772,#49801,#49825,#49851,#49875, + #49902,#49914,#49931)); +#49467 = ADVANCED_FACE('',(#49468),#49502,.T.); +#49468 = FACE_BOUND('',#49469,.F.); +#49469 = EDGE_LOOP('',(#49470,#49480,#49488,#49496)); +#49470 = ORIENTED_EDGE('',*,*,#49471,.T.); +#49471 = EDGE_CURVE('',#49472,#49474,#49476,.T.); +#49472 = VERTEX_POINT('',#49473); +#49473 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49474 = VERTEX_POINT('',#49475); +#49475 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49476 = LINE('',#49477,#49478); +#49477 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49478 = VECTOR('',#49479,1.); +#49479 = DIRECTION('',(0.,0.,1.)); +#49480 = ORIENTED_EDGE('',*,*,#49481,.T.); +#49481 = EDGE_CURVE('',#49474,#49482,#49484,.T.); +#49482 = VERTEX_POINT('',#49483); +#49483 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49484 = LINE('',#49485,#49486); +#49485 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49486 = VECTOR('',#49487,1.); +#49487 = DIRECTION('',(-1.,-0.,-0.)); +#49488 = ORIENTED_EDGE('',*,*,#49489,.F.); +#49489 = EDGE_CURVE('',#49490,#49482,#49492,.T.); +#49490 = VERTEX_POINT('',#49491); +#49491 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49492 = LINE('',#49493,#49494); +#49493 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49494 = VECTOR('',#49495,1.); +#49495 = DIRECTION('',(0.,0.,1.)); +#49496 = ORIENTED_EDGE('',*,*,#49497,.F.); +#49497 = EDGE_CURVE('',#49472,#49490,#49498,.T.); +#49498 = LINE('',#49499,#49500); +#49499 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49500 = VECTOR('',#49501,1.); +#49501 = DIRECTION('',(-1.,-0.,-0.)); +#49502 = PLANE('',#49503); +#49503 = AXIS2_PLACEMENT_3D('',#49504,#49505,#49506); +#49504 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49505 = DIRECTION('',(0.,1.,0.)); +#49506 = DIRECTION('',(1.,0.,0.)); +#49507 = ADVANCED_FACE('',(#49508),#49533,.F.); +#49508 = FACE_BOUND('',#49509,.T.); +#49509 = EDGE_LOOP('',(#49510,#49518,#49519,#49527)); +#49510 = ORIENTED_EDGE('',*,*,#49511,.F.); +#49511 = EDGE_CURVE('',#49472,#49512,#49514,.T.); +#49512 = VERTEX_POINT('',#49513); +#49513 = CARTESIAN_POINT('',(9.,0.455,0.)); +#49514 = LINE('',#49515,#49516); +#49515 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49516 = VECTOR('',#49517,1.); +#49517 = DIRECTION('',(-0.,-1.,-0.)); +#49518 = ORIENTED_EDGE('',*,*,#49471,.T.); +#49519 = ORIENTED_EDGE('',*,*,#49520,.T.); +#49520 = EDGE_CURVE('',#49474,#49521,#49523,.T.); +#49521 = VERTEX_POINT('',#49522); +#49522 = CARTESIAN_POINT('',(9.,0.455,0.4)); +#49523 = LINE('',#49524,#49525); +#49524 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49525 = VECTOR('',#49526,1.); +#49526 = DIRECTION('',(-0.,-1.,-0.)); +#49527 = ORIENTED_EDGE('',*,*,#49528,.F.); +#49528 = EDGE_CURVE('',#49512,#49521,#49529,.T.); +#49529 = LINE('',#49530,#49531); +#49530 = CARTESIAN_POINT('',(9.,0.455,0.8)); +#49531 = VECTOR('',#49532,1.); +#49532 = DIRECTION('',(0.,0.,1.)); +#49533 = PLANE('',#49534); +#49534 = AXIS2_PLACEMENT_3D('',#49535,#49536,#49537); +#49535 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49536 = DIRECTION('',(-1.,-0.,-0.)); +#49537 = DIRECTION('',(0.,1.,0.)); +#49538 = ADVANCED_FACE('',(#49539),#49564,.F.); +#49539 = FACE_BOUND('',#49540,.T.); +#49540 = EDGE_LOOP('',(#49541,#49549,#49557,#49563)); +#49541 = ORIENTED_EDGE('',*,*,#49542,.T.); +#49542 = EDGE_CURVE('',#49490,#49543,#49545,.T.); +#49543 = VERTEX_POINT('',#49544); +#49544 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#49545 = LINE('',#49546,#49547); +#49546 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49547 = VECTOR('',#49548,1.); +#49548 = DIRECTION('',(-1.,-0.,-0.)); +#49549 = ORIENTED_EDGE('',*,*,#49550,.T.); +#49550 = EDGE_CURVE('',#49543,#49551,#49553,.T.); +#49551 = VERTEX_POINT('',#49552); +#49552 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#49553 = LINE('',#49554,#49555); +#49554 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#49555 = VECTOR('',#49556,1.); +#49556 = DIRECTION('',(0.,0.,1.)); +#49557 = ORIENTED_EDGE('',*,*,#49558,.F.); +#49558 = EDGE_CURVE('',#49482,#49551,#49559,.T.); +#49559 = LINE('',#49560,#49561); +#49560 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49561 = VECTOR('',#49562,1.); +#49562 = DIRECTION('',(-1.,-0.,-0.)); +#49563 = ORIENTED_EDGE('',*,*,#49489,.F.); +#49564 = PLANE('',#49565); +#49565 = AXIS2_PLACEMENT_3D('',#49566,#49567,#49568); +#49566 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49567 = DIRECTION('',(-0.,-1.,-0.)); +#49568 = DIRECTION('',(0.,0.,-1.)); +#49569 = ADVANCED_FACE('',(#49570),#49614,.F.); +#49570 = FACE_BOUND('',#49571,.T.); +#49571 = EDGE_LOOP('',(#49572,#49573,#49574,#49583,#49592,#49600,#49608) + ); +#49572 = ORIENTED_EDGE('',*,*,#49497,.F.); +#49573 = ORIENTED_EDGE('',*,*,#49511,.T.); +#49574 = ORIENTED_EDGE('',*,*,#49575,.F.); +#49575 = EDGE_CURVE('',#49576,#49512,#49578,.T.); +#49576 = VERTEX_POINT('',#49577); +#49577 = CARTESIAN_POINT('',(8.725,0.18,0.)); +#49578 = CIRCLE('',#49579,0.275); +#49579 = AXIS2_PLACEMENT_3D('',#49580,#49581,#49582); +#49580 = CARTESIAN_POINT('',(9.,0.18,0.)); +#49581 = DIRECTION('',(0.,0.,-1.)); +#49582 = DIRECTION('',(-1.,-0.,-0.)); +#49583 = ORIENTED_EDGE('',*,*,#49584,.F.); +#49584 = EDGE_CURVE('',#49585,#49576,#49587,.T.); +#49585 = VERTEX_POINT('',#49586); +#49586 = CARTESIAN_POINT('',(9.,-9.5E-02,0.)); +#49587 = CIRCLE('',#49588,0.275); +#49588 = AXIS2_PLACEMENT_3D('',#49589,#49590,#49591); +#49589 = CARTESIAN_POINT('',(9.,0.18,0.)); +#49590 = DIRECTION('',(0.,0.,-1.)); +#49591 = DIRECTION('',(-1.,-0.,-0.)); +#49592 = ORIENTED_EDGE('',*,*,#49593,.T.); +#49593 = EDGE_CURVE('',#49585,#49594,#49596,.T.); +#49594 = VERTEX_POINT('',#49595); +#49595 = CARTESIAN_POINT('',(9.,-0.27,0.)); +#49596 = LINE('',#49597,#49598); +#49597 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49598 = VECTOR('',#49599,1.); +#49599 = DIRECTION('',(-0.,-1.,-0.)); +#49600 = ORIENTED_EDGE('',*,*,#49601,.F.); +#49601 = EDGE_CURVE('',#49602,#49594,#49604,.T.); +#49602 = VERTEX_POINT('',#49603); +#49603 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49604 = LINE('',#49605,#49606); +#49605 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49606 = VECTOR('',#49607,1.); +#49607 = DIRECTION('',(1.,0.,0.)); +#49608 = ORIENTED_EDGE('',*,*,#49609,.F.); +#49609 = EDGE_CURVE('',#49490,#49602,#49610,.T.); +#49610 = LINE('',#49611,#49612); +#49611 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49612 = VECTOR('',#49613,1.); +#49613 = DIRECTION('',(-0.,-1.,-0.)); +#49614 = PLANE('',#49615); +#49615 = AXIS2_PLACEMENT_3D('',#49616,#49617,#49618); +#49616 = CARTESIAN_POINT('',(8.775,0.18,0.)); +#49617 = DIRECTION('',(0.,0.,1.)); +#49618 = DIRECTION('',(1.,0.,-0.)); +#49619 = ADVANCED_FACE('',(#49620),#49645,.T.); +#49620 = FACE_BOUND('',#49621,.F.); +#49621 = EDGE_LOOP('',(#49622,#49630,#49638,#49644)); +#49622 = ORIENTED_EDGE('',*,*,#49623,.T.); +#49623 = EDGE_CURVE('',#49474,#49624,#49626,.T.); +#49624 = VERTEX_POINT('',#49625); +#49625 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#49626 = LINE('',#49627,#49628); +#49627 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49628 = VECTOR('',#49629,1.); +#49629 = DIRECTION('',(0.,0.,1.)); +#49630 = ORIENTED_EDGE('',*,*,#49631,.T.); +#49631 = EDGE_CURVE('',#49624,#49632,#49634,.T.); +#49632 = VERTEX_POINT('',#49633); +#49633 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#49634 = LINE('',#49635,#49636); +#49635 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#49636 = VECTOR('',#49637,1.); +#49637 = DIRECTION('',(-1.,-0.,-0.)); +#49638 = ORIENTED_EDGE('',*,*,#49639,.F.); +#49639 = EDGE_CURVE('',#49482,#49632,#49640,.T.); +#49640 = LINE('',#49641,#49642); +#49641 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49642 = VECTOR('',#49643,1.); +#49643 = DIRECTION('',(0.,0.,1.)); +#49644 = ORIENTED_EDGE('',*,*,#49481,.F.); +#49645 = PLANE('',#49646); +#49646 = AXIS2_PLACEMENT_3D('',#49647,#49648,#49649); +#49647 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49648 = DIRECTION('',(0.,1.,0.)); +#49649 = DIRECTION('',(1.,0.,0.)); +#49650 = ADVANCED_FACE('',(#49651),#49678,.F.); +#49651 = FACE_BOUND('',#49652,.F.); +#49652 = EDGE_LOOP('',(#49653,#49661,#49662,#49663,#49671)); +#49653 = ORIENTED_EDGE('',*,*,#49654,.F.); +#49654 = EDGE_CURVE('',#49521,#49655,#49657,.T.); +#49655 = VERTEX_POINT('',#49656); +#49656 = CARTESIAN_POINT('',(9.,0.455,0.8)); +#49657 = LINE('',#49658,#49659); +#49658 = CARTESIAN_POINT('',(9.,0.455,0.8)); +#49659 = VECTOR('',#49660,1.); +#49660 = DIRECTION('',(0.,0.,1.)); +#49661 = ORIENTED_EDGE('',*,*,#49528,.F.); +#49662 = ORIENTED_EDGE('',*,*,#49575,.F.); +#49663 = ORIENTED_EDGE('',*,*,#49664,.F.); +#49664 = EDGE_CURVE('',#49665,#49576,#49667,.T.); +#49665 = VERTEX_POINT('',#49666); +#49666 = CARTESIAN_POINT('',(8.725,0.18,0.8)); +#49667 = LINE('',#49668,#49669); +#49668 = CARTESIAN_POINT('',(8.725,0.18,0.8)); +#49669 = VECTOR('',#49670,1.); +#49670 = DIRECTION('',(0.,0.,-1.)); +#49671 = ORIENTED_EDGE('',*,*,#49672,.T.); +#49672 = EDGE_CURVE('',#49665,#49655,#49673,.T.); +#49673 = CIRCLE('',#49674,0.275); +#49674 = AXIS2_PLACEMENT_3D('',#49675,#49676,#49677); +#49675 = CARTESIAN_POINT('',(9.,0.18,0.8)); +#49676 = DIRECTION('',(0.,0.,-1.)); +#49677 = DIRECTION('',(-1.,-0.,-0.)); +#49678 = CYLINDRICAL_SURFACE('',#49679,0.275); +#49679 = AXIS2_PLACEMENT_3D('',#49680,#49681,#49682); +#49680 = CARTESIAN_POINT('',(9.,0.18,0.8)); +#49681 = DIRECTION('',(0.,0.,1.)); +#49682 = DIRECTION('',(-1.,0.,0.)); +#49683 = ADVANCED_FACE('',(#49684),#49695,.F.); +#49684 = FACE_BOUND('',#49685,.T.); +#49685 = EDGE_LOOP('',(#49686,#49687,#49688,#49694)); +#49686 = ORIENTED_EDGE('',*,*,#49520,.F.); +#49687 = ORIENTED_EDGE('',*,*,#49623,.T.); +#49688 = ORIENTED_EDGE('',*,*,#49689,.T.); +#49689 = EDGE_CURVE('',#49624,#49655,#49690,.T.); +#49690 = LINE('',#49691,#49692); +#49691 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#49692 = VECTOR('',#49693,1.); +#49693 = DIRECTION('',(-0.,-1.,-0.)); +#49694 = ORIENTED_EDGE('',*,*,#49654,.F.); +#49695 = PLANE('',#49696); +#49696 = AXIS2_PLACEMENT_3D('',#49697,#49698,#49699); +#49697 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49698 = DIRECTION('',(-1.,-0.,-0.)); +#49699 = DIRECTION('',(0.,1.,0.)); +#49700 = ADVANCED_FACE('',(#49701),#49719,.T.); +#49701 = FACE_BOUND('',#49702,.F.); +#49702 = EDGE_LOOP('',(#49703,#49704,#49712,#49718)); +#49703 = ORIENTED_EDGE('',*,*,#49542,.T.); +#49704 = ORIENTED_EDGE('',*,*,#49705,.T.); +#49705 = EDGE_CURVE('',#49543,#49706,#49708,.T.); +#49706 = VERTEX_POINT('',#49707); +#49707 = CARTESIAN_POINT('',(8.15,-0.27,0.)); +#49708 = LINE('',#49709,#49710); +#49709 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#49710 = VECTOR('',#49711,1.); +#49711 = DIRECTION('',(-0.,-1.,-0.)); +#49712 = ORIENTED_EDGE('',*,*,#49713,.F.); +#49713 = EDGE_CURVE('',#49602,#49706,#49714,.T.); +#49714 = LINE('',#49715,#49716); +#49715 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49716 = VECTOR('',#49717,1.); +#49717 = DIRECTION('',(-1.,-0.,-0.)); +#49718 = ORIENTED_EDGE('',*,*,#49609,.F.); +#49719 = PLANE('',#49720); +#49720 = AXIS2_PLACEMENT_3D('',#49721,#49722,#49723); +#49721 = CARTESIAN_POINT('',(8.55,0.63,0.)); +#49722 = DIRECTION('',(-0.,-0.,-1.)); +#49723 = DIRECTION('',(0.,1.,-0.)); +#49724 = ADVANCED_FACE('',(#49725),#49750,.F.); +#49725 = FACE_BOUND('',#49726,.T.); +#49726 = EDGE_LOOP('',(#49727,#49728,#49736,#49744)); +#49727 = ORIENTED_EDGE('',*,*,#49558,.T.); +#49728 = ORIENTED_EDGE('',*,*,#49729,.T.); +#49729 = EDGE_CURVE('',#49551,#49730,#49732,.T.); +#49730 = VERTEX_POINT('',#49731); +#49731 = CARTESIAN_POINT('',(8.15,-0.27,0.4)); +#49732 = LINE('',#49733,#49734); +#49733 = CARTESIAN_POINT('',(8.15,0.63,0.4)); +#49734 = VECTOR('',#49735,1.); +#49735 = DIRECTION('',(-0.,-1.,-0.)); +#49736 = ORIENTED_EDGE('',*,*,#49737,.F.); +#49737 = EDGE_CURVE('',#49738,#49730,#49740,.T.); +#49738 = VERTEX_POINT('',#49739); +#49739 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#49740 = LINE('',#49741,#49742); +#49741 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#49742 = VECTOR('',#49743,1.); +#49743 = DIRECTION('',(-1.,-0.,-0.)); +#49744 = ORIENTED_EDGE('',*,*,#49745,.F.); +#49745 = EDGE_CURVE('',#49482,#49738,#49746,.T.); +#49746 = LINE('',#49747,#49748); +#49747 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49748 = VECTOR('',#49749,1.); +#49749 = DIRECTION('',(-0.,-1.,-0.)); +#49750 = PLANE('',#49751); +#49751 = AXIS2_PLACEMENT_3D('',#49752,#49753,#49754); +#49752 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49753 = DIRECTION('',(-0.,-0.,-1.)); +#49754 = DIRECTION('',(0.,1.,-0.)); +#49755 = ADVANCED_FACE('',(#49756),#49767,.T.); +#49756 = FACE_BOUND('',#49757,.F.); +#49757 = EDGE_LOOP('',(#49758,#49759,#49760,#49766)); +#49758 = ORIENTED_EDGE('',*,*,#49550,.T.); +#49759 = ORIENTED_EDGE('',*,*,#49729,.T.); +#49760 = ORIENTED_EDGE('',*,*,#49761,.F.); +#49761 = EDGE_CURVE('',#49706,#49730,#49762,.T.); +#49762 = LINE('',#49763,#49764); +#49763 = CARTESIAN_POINT('',(8.15,-0.27,0.)); +#49764 = VECTOR('',#49765,1.); +#49765 = DIRECTION('',(0.,0.,1.)); +#49766 = ORIENTED_EDGE('',*,*,#49705,.F.); +#49767 = PLANE('',#49768); +#49768 = AXIS2_PLACEMENT_3D('',#49769,#49770,#49771); +#49769 = CARTESIAN_POINT('',(8.15,0.63,0.)); +#49770 = DIRECTION('',(-1.,-0.,-0.)); +#49771 = DIRECTION('',(0.,1.,0.)); +#49772 = ADVANCED_FACE('',(#49773),#49796,.T.); +#49773 = FACE_BOUND('',#49774,.F.); +#49774 = EDGE_LOOP('',(#49775,#49781,#49789,#49795)); +#49775 = ORIENTED_EDGE('',*,*,#49776,.T.); +#49776 = EDGE_CURVE('',#49602,#49738,#49777,.T.); +#49777 = LINE('',#49778,#49779); +#49778 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49779 = VECTOR('',#49780,1.); +#49780 = DIRECTION('',(0.,0.,1.)); +#49781 = ORIENTED_EDGE('',*,*,#49782,.T.); +#49782 = EDGE_CURVE('',#49738,#49783,#49785,.T.); +#49783 = VERTEX_POINT('',#49784); +#49784 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#49785 = LINE('',#49786,#49787); +#49786 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#49787 = VECTOR('',#49788,1.); +#49788 = DIRECTION('',(1.,0.,0.)); +#49789 = ORIENTED_EDGE('',*,*,#49790,.F.); +#49790 = EDGE_CURVE('',#49594,#49783,#49791,.T.); +#49791 = LINE('',#49792,#49793); +#49792 = CARTESIAN_POINT('',(9.,-0.27,0.)); +#49793 = VECTOR('',#49794,1.); +#49794 = DIRECTION('',(0.,0.,1.)); +#49795 = ORIENTED_EDGE('',*,*,#49601,.F.); +#49796 = PLANE('',#49797); +#49797 = AXIS2_PLACEMENT_3D('',#49798,#49799,#49800); +#49798 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49799 = DIRECTION('',(-0.,-1.,-0.)); +#49800 = DIRECTION('',(-1.,0.,0.)); +#49801 = ADVANCED_FACE('',(#49802),#49820,.F.); +#49802 = FACE_BOUND('',#49803,.T.); +#49803 = EDGE_LOOP('',(#49804,#49805,#49813,#49819)); +#49804 = ORIENTED_EDGE('',*,*,#49593,.F.); +#49805 = ORIENTED_EDGE('',*,*,#49806,.T.); +#49806 = EDGE_CURVE('',#49585,#49807,#49809,.T.); +#49807 = VERTEX_POINT('',#49808); +#49808 = CARTESIAN_POINT('',(9.,-9.5E-02,0.4)); +#49809 = LINE('',#49810,#49811); +#49810 = CARTESIAN_POINT('',(9.,-9.5E-02,0.8)); +#49811 = VECTOR('',#49812,1.); +#49812 = DIRECTION('',(0.,0.,1.)); +#49813 = ORIENTED_EDGE('',*,*,#49814,.T.); +#49814 = EDGE_CURVE('',#49807,#49783,#49815,.T.); +#49815 = LINE('',#49816,#49817); +#49816 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49817 = VECTOR('',#49818,1.); +#49818 = DIRECTION('',(-0.,-1.,-0.)); +#49819 = ORIENTED_EDGE('',*,*,#49790,.F.); +#49820 = PLANE('',#49821); +#49821 = AXIS2_PLACEMENT_3D('',#49822,#49823,#49824); +#49822 = CARTESIAN_POINT('',(9.,0.63,0.)); +#49823 = DIRECTION('',(-1.,-0.,-0.)); +#49824 = DIRECTION('',(0.,1.,0.)); +#49825 = ADVANCED_FACE('',(#49826),#49846,.F.); +#49826 = FACE_BOUND('',#49827,.F.); +#49827 = EDGE_LOOP('',(#49828,#49829,#49830,#49838,#49845)); +#49828 = ORIENTED_EDGE('',*,*,#49584,.F.); +#49829 = ORIENTED_EDGE('',*,*,#49806,.T.); +#49830 = ORIENTED_EDGE('',*,*,#49831,.T.); +#49831 = EDGE_CURVE('',#49807,#49832,#49834,.T.); +#49832 = VERTEX_POINT('',#49833); +#49833 = CARTESIAN_POINT('',(9.,-9.5E-02,0.8)); +#49834 = LINE('',#49835,#49836); +#49835 = CARTESIAN_POINT('',(9.,-9.5E-02,0.8)); +#49836 = VECTOR('',#49837,1.); +#49837 = DIRECTION('',(0.,0.,1.)); +#49838 = ORIENTED_EDGE('',*,*,#49839,.T.); +#49839 = EDGE_CURVE('',#49832,#49665,#49840,.T.); +#49840 = CIRCLE('',#49841,0.275); +#49841 = AXIS2_PLACEMENT_3D('',#49842,#49843,#49844); +#49842 = CARTESIAN_POINT('',(9.,0.18,0.8)); +#49843 = DIRECTION('',(0.,0.,-1.)); +#49844 = DIRECTION('',(-1.,-0.,-0.)); +#49845 = ORIENTED_EDGE('',*,*,#49664,.T.); +#49846 = CYLINDRICAL_SURFACE('',#49847,0.275); +#49847 = AXIS2_PLACEMENT_3D('',#49848,#49849,#49850); +#49848 = CARTESIAN_POINT('',(9.,0.18,0.8)); +#49849 = DIRECTION('',(0.,0.,1.)); +#49850 = DIRECTION('',(-1.,0.,0.)); +#49851 = ADVANCED_FACE('',(#49852),#49870,.T.); +#49852 = FACE_BOUND('',#49853,.F.); +#49853 = EDGE_LOOP('',(#49854,#49855,#49863,#49869)); +#49854 = ORIENTED_EDGE('',*,*,#49639,.T.); +#49855 = ORIENTED_EDGE('',*,*,#49856,.T.); +#49856 = EDGE_CURVE('',#49632,#49857,#49859,.T.); +#49857 = VERTEX_POINT('',#49858); +#49858 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#49859 = LINE('',#49860,#49861); +#49860 = CARTESIAN_POINT('',(8.55,0.63,0.8)); +#49861 = VECTOR('',#49862,1.); +#49862 = DIRECTION('',(-0.,-1.,-0.)); +#49863 = ORIENTED_EDGE('',*,*,#49864,.F.); +#49864 = EDGE_CURVE('',#49738,#49857,#49865,.T.); +#49865 = LINE('',#49866,#49867); +#49866 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#49867 = VECTOR('',#49868,1.); +#49868 = DIRECTION('',(0.,0.,1.)); +#49869 = ORIENTED_EDGE('',*,*,#49745,.F.); +#49870 = PLANE('',#49871); +#49871 = AXIS2_PLACEMENT_3D('',#49872,#49873,#49874); +#49872 = CARTESIAN_POINT('',(8.55,0.63,0.4)); +#49873 = DIRECTION('',(-1.,-0.,-0.)); +#49874 = DIRECTION('',(0.,1.,0.)); +#49875 = ADVANCED_FACE('',(#49876),#49897,.T.); +#49876 = FACE_BOUND('',#49877,.F.); +#49877 = EDGE_LOOP('',(#49878,#49879,#49880,#49881,#49882,#49890,#49896) + ); +#49878 = ORIENTED_EDGE('',*,*,#49631,.F.); +#49879 = ORIENTED_EDGE('',*,*,#49689,.T.); +#49880 = ORIENTED_EDGE('',*,*,#49672,.F.); +#49881 = ORIENTED_EDGE('',*,*,#49839,.F.); +#49882 = ORIENTED_EDGE('',*,*,#49883,.T.); +#49883 = EDGE_CURVE('',#49832,#49884,#49886,.T.); +#49884 = VERTEX_POINT('',#49885); +#49885 = CARTESIAN_POINT('',(9.,-0.27,0.8)); +#49886 = LINE('',#49887,#49888); +#49887 = CARTESIAN_POINT('',(9.,0.63,0.8)); +#49888 = VECTOR('',#49889,1.); +#49889 = DIRECTION('',(-0.,-1.,-0.)); +#49890 = ORIENTED_EDGE('',*,*,#49891,.F.); +#49891 = EDGE_CURVE('',#49857,#49884,#49892,.T.); +#49892 = LINE('',#49893,#49894); +#49893 = CARTESIAN_POINT('',(8.55,-0.27,0.8)); +#49894 = VECTOR('',#49895,1.); +#49895 = DIRECTION('',(1.,0.,0.)); +#49896 = ORIENTED_EDGE('',*,*,#49856,.F.); +#49897 = PLANE('',#49898); +#49898 = AXIS2_PLACEMENT_3D('',#49899,#49900,#49901); +#49899 = CARTESIAN_POINT('',(8.775,0.18,0.8)); +#49900 = DIRECTION('',(0.,0.,1.)); +#49901 = DIRECTION('',(1.,0.,-0.)); +#49902 = ADVANCED_FACE('',(#49903),#49909,.T.); +#49903 = FACE_BOUND('',#49904,.F.); +#49904 = EDGE_LOOP('',(#49905,#49906,#49907,#49908)); +#49905 = ORIENTED_EDGE('',*,*,#49713,.T.); +#49906 = ORIENTED_EDGE('',*,*,#49761,.T.); +#49907 = ORIENTED_EDGE('',*,*,#49737,.F.); +#49908 = ORIENTED_EDGE('',*,*,#49776,.F.); +#49909 = PLANE('',#49910); +#49910 = AXIS2_PLACEMENT_3D('',#49911,#49912,#49913); +#49911 = CARTESIAN_POINT('',(8.55,-0.27,0.)); +#49912 = DIRECTION('',(-0.,-1.,-0.)); +#49913 = DIRECTION('',(0.,0.,-1.)); +#49914 = ADVANCED_FACE('',(#49915),#49926,.T.); +#49915 = FACE_BOUND('',#49916,.F.); +#49916 = EDGE_LOOP('',(#49917,#49918,#49919,#49925)); +#49917 = ORIENTED_EDGE('',*,*,#49864,.T.); +#49918 = ORIENTED_EDGE('',*,*,#49891,.T.); +#49919 = ORIENTED_EDGE('',*,*,#49920,.F.); +#49920 = EDGE_CURVE('',#49783,#49884,#49921,.T.); +#49921 = LINE('',#49922,#49923); +#49922 = CARTESIAN_POINT('',(9.,-0.27,0.4)); +#49923 = VECTOR('',#49924,1.); +#49924 = DIRECTION('',(0.,0.,1.)); +#49925 = ORIENTED_EDGE('',*,*,#49782,.F.); +#49926 = PLANE('',#49927); +#49927 = AXIS2_PLACEMENT_3D('',#49928,#49929,#49930); +#49928 = CARTESIAN_POINT('',(8.55,-0.27,0.4)); +#49929 = DIRECTION('',(-0.,-1.,-0.)); +#49930 = DIRECTION('',(-1.,0.,0.)); +#49931 = ADVANCED_FACE('',(#49932),#49938,.F.); +#49932 = FACE_BOUND('',#49933,.T.); +#49933 = EDGE_LOOP('',(#49934,#49935,#49936,#49937)); +#49934 = ORIENTED_EDGE('',*,*,#49814,.F.); +#49935 = ORIENTED_EDGE('',*,*,#49831,.T.); +#49936 = ORIENTED_EDGE('',*,*,#49883,.T.); +#49937 = ORIENTED_EDGE('',*,*,#49920,.F.); +#49938 = PLANE('',#49939); +#49939 = AXIS2_PLACEMENT_3D('',#49940,#49941,#49942); +#49940 = CARTESIAN_POINT('',(9.,0.63,0.4)); +#49941 = DIRECTION('',(-1.,-0.,-0.)); +#49942 = DIRECTION('',(0.,1.,0.)); +#49943 = MANIFOLD_SOLID_BREP('',#49944); +#49944 = CLOSED_SHELL('',(#49945,#49985,#50016,#50047,#50097,#50128, + #50161,#50178,#50202,#50233,#50250,#50279,#50303,#50329,#50353, + #50380,#50392,#50409)); +#49945 = ADVANCED_FACE('',(#49946),#49980,.T.); +#49946 = FACE_BOUND('',#49947,.F.); +#49947 = EDGE_LOOP('',(#49948,#49958,#49966,#49974)); +#49948 = ORIENTED_EDGE('',*,*,#49949,.T.); +#49949 = EDGE_CURVE('',#49950,#49952,#49954,.T.); +#49950 = VERTEX_POINT('',#49951); +#49951 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#49952 = VERTEX_POINT('',#49953); +#49953 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#49954 = LINE('',#49955,#49956); +#49955 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#49956 = VECTOR('',#49957,1.); +#49957 = DIRECTION('',(0.,0.,1.)); +#49958 = ORIENTED_EDGE('',*,*,#49959,.T.); +#49959 = EDGE_CURVE('',#49952,#49960,#49962,.T.); +#49960 = VERTEX_POINT('',#49961); +#49961 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#49962 = LINE('',#49963,#49964); +#49963 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#49964 = VECTOR('',#49965,1.); +#49965 = DIRECTION('',(-1.,-0.,-0.)); +#49966 = ORIENTED_EDGE('',*,*,#49967,.F.); +#49967 = EDGE_CURVE('',#49968,#49960,#49970,.T.); +#49968 = VERTEX_POINT('',#49969); +#49969 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#49970 = LINE('',#49971,#49972); +#49971 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#49972 = VECTOR('',#49973,1.); +#49973 = DIRECTION('',(0.,0.,1.)); +#49974 = ORIENTED_EDGE('',*,*,#49975,.F.); +#49975 = EDGE_CURVE('',#49950,#49968,#49976,.T.); +#49976 = LINE('',#49977,#49978); +#49977 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#49978 = VECTOR('',#49979,1.); +#49979 = DIRECTION('',(-1.,-0.,-0.)); +#49980 = PLANE('',#49981); +#49981 = AXIS2_PLACEMENT_3D('',#49982,#49983,#49984); +#49982 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#49983 = DIRECTION('',(0.,1.,0.)); +#49984 = DIRECTION('',(1.,0.,0.)); +#49985 = ADVANCED_FACE('',(#49986),#50011,.F.); +#49986 = FACE_BOUND('',#49987,.T.); +#49987 = EDGE_LOOP('',(#49988,#49996,#49997,#50005)); +#49988 = ORIENTED_EDGE('',*,*,#49989,.F.); +#49989 = EDGE_CURVE('',#49950,#49990,#49992,.T.); +#49990 = VERTEX_POINT('',#49991); +#49991 = CARTESIAN_POINT('',(9.,-0.815,0.)); +#49992 = LINE('',#49993,#49994); +#49993 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#49994 = VECTOR('',#49995,1.); +#49995 = DIRECTION('',(-0.,-1.,-0.)); +#49996 = ORIENTED_EDGE('',*,*,#49949,.T.); +#49997 = ORIENTED_EDGE('',*,*,#49998,.T.); +#49998 = EDGE_CURVE('',#49952,#49999,#50001,.T.); +#49999 = VERTEX_POINT('',#50000); +#50000 = CARTESIAN_POINT('',(9.,-0.815,0.4)); +#50001 = LINE('',#50002,#50003); +#50002 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50003 = VECTOR('',#50004,1.); +#50004 = DIRECTION('',(-0.,-1.,-0.)); +#50005 = ORIENTED_EDGE('',*,*,#50006,.F.); +#50006 = EDGE_CURVE('',#49990,#49999,#50007,.T.); +#50007 = LINE('',#50008,#50009); +#50008 = CARTESIAN_POINT('',(9.,-0.815,0.8)); +#50009 = VECTOR('',#50010,1.); +#50010 = DIRECTION('',(0.,0.,1.)); +#50011 = PLANE('',#50012); +#50012 = AXIS2_PLACEMENT_3D('',#50013,#50014,#50015); +#50013 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#50014 = DIRECTION('',(-1.,-0.,-0.)); +#50015 = DIRECTION('',(0.,1.,0.)); +#50016 = ADVANCED_FACE('',(#50017),#50042,.F.); +#50017 = FACE_BOUND('',#50018,.T.); +#50018 = EDGE_LOOP('',(#50019,#50027,#50035,#50041)); +#50019 = ORIENTED_EDGE('',*,*,#50020,.T.); +#50020 = EDGE_CURVE('',#49968,#50021,#50023,.T.); +#50021 = VERTEX_POINT('',#50022); +#50022 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#50023 = LINE('',#50024,#50025); +#50024 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#50025 = VECTOR('',#50026,1.); +#50026 = DIRECTION('',(-1.,-0.,-0.)); +#50027 = ORIENTED_EDGE('',*,*,#50028,.T.); +#50028 = EDGE_CURVE('',#50021,#50029,#50031,.T.); +#50029 = VERTEX_POINT('',#50030); +#50030 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#50031 = LINE('',#50032,#50033); +#50032 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#50033 = VECTOR('',#50034,1.); +#50034 = DIRECTION('',(0.,0.,1.)); +#50035 = ORIENTED_EDGE('',*,*,#50036,.F.); +#50036 = EDGE_CURVE('',#49960,#50029,#50037,.T.); +#50037 = LINE('',#50038,#50039); +#50038 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#50039 = VECTOR('',#50040,1.); +#50040 = DIRECTION('',(-1.,-0.,-0.)); +#50041 = ORIENTED_EDGE('',*,*,#49967,.F.); +#50042 = PLANE('',#50043); +#50043 = AXIS2_PLACEMENT_3D('',#50044,#50045,#50046); +#50044 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#50045 = DIRECTION('',(-0.,-1.,-0.)); +#50046 = DIRECTION('',(0.,0.,-1.)); +#50047 = ADVANCED_FACE('',(#50048),#50092,.F.); +#50048 = FACE_BOUND('',#50049,.T.); +#50049 = EDGE_LOOP('',(#50050,#50051,#50052,#50061,#50070,#50078,#50086) + ); +#50050 = ORIENTED_EDGE('',*,*,#49975,.F.); +#50051 = ORIENTED_EDGE('',*,*,#49989,.T.); +#50052 = ORIENTED_EDGE('',*,*,#50053,.F.); +#50053 = EDGE_CURVE('',#50054,#49990,#50056,.T.); +#50054 = VERTEX_POINT('',#50055); +#50055 = CARTESIAN_POINT('',(8.725,-1.09,0.)); +#50056 = CIRCLE('',#50057,0.275); +#50057 = AXIS2_PLACEMENT_3D('',#50058,#50059,#50060); +#50058 = CARTESIAN_POINT('',(9.,-1.09,0.)); +#50059 = DIRECTION('',(0.,0.,-1.)); +#50060 = DIRECTION('',(-1.,-0.,-0.)); +#50061 = ORIENTED_EDGE('',*,*,#50062,.F.); +#50062 = EDGE_CURVE('',#50063,#50054,#50065,.T.); +#50063 = VERTEX_POINT('',#50064); +#50064 = CARTESIAN_POINT('',(9.,-1.365,0.)); +#50065 = CIRCLE('',#50066,0.275); +#50066 = AXIS2_PLACEMENT_3D('',#50067,#50068,#50069); +#50067 = CARTESIAN_POINT('',(9.,-1.09,0.)); +#50068 = DIRECTION('',(0.,0.,-1.)); +#50069 = DIRECTION('',(-1.,-0.,-0.)); +#50070 = ORIENTED_EDGE('',*,*,#50071,.T.); +#50071 = EDGE_CURVE('',#50063,#50072,#50074,.T.); +#50072 = VERTEX_POINT('',#50073); +#50073 = CARTESIAN_POINT('',(9.,-1.54,0.)); +#50074 = LINE('',#50075,#50076); +#50075 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#50076 = VECTOR('',#50077,1.); +#50077 = DIRECTION('',(-0.,-1.,-0.)); +#50078 = ORIENTED_EDGE('',*,*,#50079,.F.); +#50079 = EDGE_CURVE('',#50080,#50072,#50082,.T.); +#50080 = VERTEX_POINT('',#50081); +#50081 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50082 = LINE('',#50083,#50084); +#50083 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50084 = VECTOR('',#50085,1.); +#50085 = DIRECTION('',(1.,0.,0.)); +#50086 = ORIENTED_EDGE('',*,*,#50087,.F.); +#50087 = EDGE_CURVE('',#49968,#50080,#50088,.T.); +#50088 = LINE('',#50089,#50090); +#50089 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#50090 = VECTOR('',#50091,1.); +#50091 = DIRECTION('',(-0.,-1.,-0.)); +#50092 = PLANE('',#50093); +#50093 = AXIS2_PLACEMENT_3D('',#50094,#50095,#50096); +#50094 = CARTESIAN_POINT('',(8.775,-1.09,0.)); +#50095 = DIRECTION('',(0.,0.,1.)); +#50096 = DIRECTION('',(1.,0.,-0.)); +#50097 = ADVANCED_FACE('',(#50098),#50123,.T.); +#50098 = FACE_BOUND('',#50099,.F.); +#50099 = EDGE_LOOP('',(#50100,#50108,#50116,#50122)); +#50100 = ORIENTED_EDGE('',*,*,#50101,.T.); +#50101 = EDGE_CURVE('',#49952,#50102,#50104,.T.); +#50102 = VERTEX_POINT('',#50103); +#50103 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#50104 = LINE('',#50105,#50106); +#50105 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50106 = VECTOR('',#50107,1.); +#50107 = DIRECTION('',(0.,0.,1.)); +#50108 = ORIENTED_EDGE('',*,*,#50109,.T.); +#50109 = EDGE_CURVE('',#50102,#50110,#50112,.T.); +#50110 = VERTEX_POINT('',#50111); +#50111 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#50112 = LINE('',#50113,#50114); +#50113 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#50114 = VECTOR('',#50115,1.); +#50115 = DIRECTION('',(-1.,-0.,-0.)); +#50116 = ORIENTED_EDGE('',*,*,#50117,.F.); +#50117 = EDGE_CURVE('',#49960,#50110,#50118,.T.); +#50118 = LINE('',#50119,#50120); +#50119 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#50120 = VECTOR('',#50121,1.); +#50121 = DIRECTION('',(0.,0.,1.)); +#50122 = ORIENTED_EDGE('',*,*,#49959,.F.); +#50123 = PLANE('',#50124); +#50124 = AXIS2_PLACEMENT_3D('',#50125,#50126,#50127); +#50125 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50126 = DIRECTION('',(0.,1.,0.)); +#50127 = DIRECTION('',(1.,0.,0.)); +#50128 = ADVANCED_FACE('',(#50129),#50156,.F.); +#50129 = FACE_BOUND('',#50130,.F.); +#50130 = EDGE_LOOP('',(#50131,#50139,#50140,#50141,#50149)); +#50131 = ORIENTED_EDGE('',*,*,#50132,.F.); +#50132 = EDGE_CURVE('',#49999,#50133,#50135,.T.); +#50133 = VERTEX_POINT('',#50134); +#50134 = CARTESIAN_POINT('',(9.,-0.815,0.8)); +#50135 = LINE('',#50136,#50137); +#50136 = CARTESIAN_POINT('',(9.,-0.815,0.8)); +#50137 = VECTOR('',#50138,1.); +#50138 = DIRECTION('',(0.,0.,1.)); +#50139 = ORIENTED_EDGE('',*,*,#50006,.F.); +#50140 = ORIENTED_EDGE('',*,*,#50053,.F.); +#50141 = ORIENTED_EDGE('',*,*,#50142,.F.); +#50142 = EDGE_CURVE('',#50143,#50054,#50145,.T.); +#50143 = VERTEX_POINT('',#50144); +#50144 = CARTESIAN_POINT('',(8.725,-1.09,0.8)); +#50145 = LINE('',#50146,#50147); +#50146 = CARTESIAN_POINT('',(8.725,-1.09,0.8)); +#50147 = VECTOR('',#50148,1.); +#50148 = DIRECTION('',(0.,0.,-1.)); +#50149 = ORIENTED_EDGE('',*,*,#50150,.T.); +#50150 = EDGE_CURVE('',#50143,#50133,#50151,.T.); +#50151 = CIRCLE('',#50152,0.275); +#50152 = AXIS2_PLACEMENT_3D('',#50153,#50154,#50155); +#50153 = CARTESIAN_POINT('',(9.,-1.09,0.8)); +#50154 = DIRECTION('',(0.,0.,-1.)); +#50155 = DIRECTION('',(-1.,-0.,-0.)); +#50156 = CYLINDRICAL_SURFACE('',#50157,0.275); +#50157 = AXIS2_PLACEMENT_3D('',#50158,#50159,#50160); +#50158 = CARTESIAN_POINT('',(9.,-1.09,0.8)); +#50159 = DIRECTION('',(0.,0.,1.)); +#50160 = DIRECTION('',(-1.,0.,0.)); +#50161 = ADVANCED_FACE('',(#50162),#50173,.F.); +#50162 = FACE_BOUND('',#50163,.T.); +#50163 = EDGE_LOOP('',(#50164,#50165,#50166,#50172)); +#50164 = ORIENTED_EDGE('',*,*,#49998,.F.); +#50165 = ORIENTED_EDGE('',*,*,#50101,.T.); +#50166 = ORIENTED_EDGE('',*,*,#50167,.T.); +#50167 = EDGE_CURVE('',#50102,#50133,#50168,.T.); +#50168 = LINE('',#50169,#50170); +#50169 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#50170 = VECTOR('',#50171,1.); +#50171 = DIRECTION('',(-0.,-1.,-0.)); +#50172 = ORIENTED_EDGE('',*,*,#50132,.F.); +#50173 = PLANE('',#50174); +#50174 = AXIS2_PLACEMENT_3D('',#50175,#50176,#50177); +#50175 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50176 = DIRECTION('',(-1.,-0.,-0.)); +#50177 = DIRECTION('',(0.,1.,0.)); +#50178 = ADVANCED_FACE('',(#50179),#50197,.T.); +#50179 = FACE_BOUND('',#50180,.F.); +#50180 = EDGE_LOOP('',(#50181,#50182,#50190,#50196)); +#50181 = ORIENTED_EDGE('',*,*,#50020,.T.); +#50182 = ORIENTED_EDGE('',*,*,#50183,.T.); +#50183 = EDGE_CURVE('',#50021,#50184,#50186,.T.); +#50184 = VERTEX_POINT('',#50185); +#50185 = CARTESIAN_POINT('',(8.15,-1.54,0.)); +#50186 = LINE('',#50187,#50188); +#50187 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#50188 = VECTOR('',#50189,1.); +#50189 = DIRECTION('',(-0.,-1.,-0.)); +#50190 = ORIENTED_EDGE('',*,*,#50191,.F.); +#50191 = EDGE_CURVE('',#50080,#50184,#50192,.T.); +#50192 = LINE('',#50193,#50194); +#50193 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50194 = VECTOR('',#50195,1.); +#50195 = DIRECTION('',(-1.,-0.,-0.)); +#50196 = ORIENTED_EDGE('',*,*,#50087,.F.); +#50197 = PLANE('',#50198); +#50198 = AXIS2_PLACEMENT_3D('',#50199,#50200,#50201); +#50199 = CARTESIAN_POINT('',(8.55,-0.64,0.)); +#50200 = DIRECTION('',(-0.,-0.,-1.)); +#50201 = DIRECTION('',(0.,1.,-0.)); +#50202 = ADVANCED_FACE('',(#50203),#50228,.F.); +#50203 = FACE_BOUND('',#50204,.T.); +#50204 = EDGE_LOOP('',(#50205,#50206,#50214,#50222)); +#50205 = ORIENTED_EDGE('',*,*,#50036,.T.); +#50206 = ORIENTED_EDGE('',*,*,#50207,.T.); +#50207 = EDGE_CURVE('',#50029,#50208,#50210,.T.); +#50208 = VERTEX_POINT('',#50209); +#50209 = CARTESIAN_POINT('',(8.15,-1.54,0.4)); +#50210 = LINE('',#50211,#50212); +#50211 = CARTESIAN_POINT('',(8.15,-0.64,0.4)); +#50212 = VECTOR('',#50213,1.); +#50213 = DIRECTION('',(-0.,-1.,-0.)); +#50214 = ORIENTED_EDGE('',*,*,#50215,.F.); +#50215 = EDGE_CURVE('',#50216,#50208,#50218,.T.); +#50216 = VERTEX_POINT('',#50217); +#50217 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#50218 = LINE('',#50219,#50220); +#50219 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#50220 = VECTOR('',#50221,1.); +#50221 = DIRECTION('',(-1.,-0.,-0.)); +#50222 = ORIENTED_EDGE('',*,*,#50223,.F.); +#50223 = EDGE_CURVE('',#49960,#50216,#50224,.T.); +#50224 = LINE('',#50225,#50226); +#50225 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#50226 = VECTOR('',#50227,1.); +#50227 = DIRECTION('',(-0.,-1.,-0.)); +#50228 = PLANE('',#50229); +#50229 = AXIS2_PLACEMENT_3D('',#50230,#50231,#50232); +#50230 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#50231 = DIRECTION('',(-0.,-0.,-1.)); +#50232 = DIRECTION('',(0.,1.,-0.)); +#50233 = ADVANCED_FACE('',(#50234),#50245,.T.); +#50234 = FACE_BOUND('',#50235,.F.); +#50235 = EDGE_LOOP('',(#50236,#50237,#50238,#50244)); +#50236 = ORIENTED_EDGE('',*,*,#50028,.T.); +#50237 = ORIENTED_EDGE('',*,*,#50207,.T.); +#50238 = ORIENTED_EDGE('',*,*,#50239,.F.); +#50239 = EDGE_CURVE('',#50184,#50208,#50240,.T.); +#50240 = LINE('',#50241,#50242); +#50241 = CARTESIAN_POINT('',(8.15,-1.54,0.)); +#50242 = VECTOR('',#50243,1.); +#50243 = DIRECTION('',(0.,0.,1.)); +#50244 = ORIENTED_EDGE('',*,*,#50183,.F.); +#50245 = PLANE('',#50246); +#50246 = AXIS2_PLACEMENT_3D('',#50247,#50248,#50249); +#50247 = CARTESIAN_POINT('',(8.15,-0.64,0.)); +#50248 = DIRECTION('',(-1.,-0.,-0.)); +#50249 = DIRECTION('',(0.,1.,0.)); +#50250 = ADVANCED_FACE('',(#50251),#50274,.T.); +#50251 = FACE_BOUND('',#50252,.F.); +#50252 = EDGE_LOOP('',(#50253,#50259,#50267,#50273)); +#50253 = ORIENTED_EDGE('',*,*,#50254,.T.); +#50254 = EDGE_CURVE('',#50080,#50216,#50255,.T.); +#50255 = LINE('',#50256,#50257); +#50256 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50257 = VECTOR('',#50258,1.); +#50258 = DIRECTION('',(0.,0.,1.)); +#50259 = ORIENTED_EDGE('',*,*,#50260,.T.); +#50260 = EDGE_CURVE('',#50216,#50261,#50263,.T.); +#50261 = VERTEX_POINT('',#50262); +#50262 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#50263 = LINE('',#50264,#50265); +#50264 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#50265 = VECTOR('',#50266,1.); +#50266 = DIRECTION('',(1.,0.,0.)); +#50267 = ORIENTED_EDGE('',*,*,#50268,.F.); +#50268 = EDGE_CURVE('',#50072,#50261,#50269,.T.); +#50269 = LINE('',#50270,#50271); +#50270 = CARTESIAN_POINT('',(9.,-1.54,0.)); +#50271 = VECTOR('',#50272,1.); +#50272 = DIRECTION('',(0.,0.,1.)); +#50273 = ORIENTED_EDGE('',*,*,#50079,.F.); +#50274 = PLANE('',#50275); +#50275 = AXIS2_PLACEMENT_3D('',#50276,#50277,#50278); +#50276 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50277 = DIRECTION('',(-0.,-1.,-0.)); +#50278 = DIRECTION('',(-1.,0.,0.)); +#50279 = ADVANCED_FACE('',(#50280),#50298,.F.); +#50280 = FACE_BOUND('',#50281,.T.); +#50281 = EDGE_LOOP('',(#50282,#50283,#50291,#50297)); +#50282 = ORIENTED_EDGE('',*,*,#50071,.F.); +#50283 = ORIENTED_EDGE('',*,*,#50284,.T.); +#50284 = EDGE_CURVE('',#50063,#50285,#50287,.T.); +#50285 = VERTEX_POINT('',#50286); +#50286 = CARTESIAN_POINT('',(9.,-1.365,0.4)); +#50287 = LINE('',#50288,#50289); +#50288 = CARTESIAN_POINT('',(9.,-1.365,0.8)); +#50289 = VECTOR('',#50290,1.); +#50290 = DIRECTION('',(0.,0.,1.)); +#50291 = ORIENTED_EDGE('',*,*,#50292,.T.); +#50292 = EDGE_CURVE('',#50285,#50261,#50293,.T.); +#50293 = LINE('',#50294,#50295); +#50294 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50295 = VECTOR('',#50296,1.); +#50296 = DIRECTION('',(-0.,-1.,-0.)); +#50297 = ORIENTED_EDGE('',*,*,#50268,.F.); +#50298 = PLANE('',#50299); +#50299 = AXIS2_PLACEMENT_3D('',#50300,#50301,#50302); +#50300 = CARTESIAN_POINT('',(9.,-0.64,0.)); +#50301 = DIRECTION('',(-1.,-0.,-0.)); +#50302 = DIRECTION('',(0.,1.,0.)); +#50303 = ADVANCED_FACE('',(#50304),#50324,.F.); +#50304 = FACE_BOUND('',#50305,.F.); +#50305 = EDGE_LOOP('',(#50306,#50307,#50308,#50316,#50323)); +#50306 = ORIENTED_EDGE('',*,*,#50062,.F.); +#50307 = ORIENTED_EDGE('',*,*,#50284,.T.); +#50308 = ORIENTED_EDGE('',*,*,#50309,.T.); +#50309 = EDGE_CURVE('',#50285,#50310,#50312,.T.); +#50310 = VERTEX_POINT('',#50311); +#50311 = CARTESIAN_POINT('',(9.,-1.365,0.8)); +#50312 = LINE('',#50313,#50314); +#50313 = CARTESIAN_POINT('',(9.,-1.365,0.8)); +#50314 = VECTOR('',#50315,1.); +#50315 = DIRECTION('',(0.,0.,1.)); +#50316 = ORIENTED_EDGE('',*,*,#50317,.T.); +#50317 = EDGE_CURVE('',#50310,#50143,#50318,.T.); +#50318 = CIRCLE('',#50319,0.275); +#50319 = AXIS2_PLACEMENT_3D('',#50320,#50321,#50322); +#50320 = CARTESIAN_POINT('',(9.,-1.09,0.8)); +#50321 = DIRECTION('',(0.,0.,-1.)); +#50322 = DIRECTION('',(-1.,-0.,-0.)); +#50323 = ORIENTED_EDGE('',*,*,#50142,.T.); +#50324 = CYLINDRICAL_SURFACE('',#50325,0.275); +#50325 = AXIS2_PLACEMENT_3D('',#50326,#50327,#50328); +#50326 = CARTESIAN_POINT('',(9.,-1.09,0.8)); +#50327 = DIRECTION('',(0.,0.,1.)); +#50328 = DIRECTION('',(-1.,0.,0.)); +#50329 = ADVANCED_FACE('',(#50330),#50348,.T.); +#50330 = FACE_BOUND('',#50331,.F.); +#50331 = EDGE_LOOP('',(#50332,#50333,#50341,#50347)); +#50332 = ORIENTED_EDGE('',*,*,#50117,.T.); +#50333 = ORIENTED_EDGE('',*,*,#50334,.T.); +#50334 = EDGE_CURVE('',#50110,#50335,#50337,.T.); +#50335 = VERTEX_POINT('',#50336); +#50336 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#50337 = LINE('',#50338,#50339); +#50338 = CARTESIAN_POINT('',(8.55,-0.64,0.8)); +#50339 = VECTOR('',#50340,1.); +#50340 = DIRECTION('',(-0.,-1.,-0.)); +#50341 = ORIENTED_EDGE('',*,*,#50342,.F.); +#50342 = EDGE_CURVE('',#50216,#50335,#50343,.T.); +#50343 = LINE('',#50344,#50345); +#50344 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#50345 = VECTOR('',#50346,1.); +#50346 = DIRECTION('',(0.,0.,1.)); +#50347 = ORIENTED_EDGE('',*,*,#50223,.F.); +#50348 = PLANE('',#50349); +#50349 = AXIS2_PLACEMENT_3D('',#50350,#50351,#50352); +#50350 = CARTESIAN_POINT('',(8.55,-0.64,0.4)); +#50351 = DIRECTION('',(-1.,-0.,-0.)); +#50352 = DIRECTION('',(0.,1.,0.)); +#50353 = ADVANCED_FACE('',(#50354),#50375,.T.); +#50354 = FACE_BOUND('',#50355,.F.); +#50355 = EDGE_LOOP('',(#50356,#50357,#50358,#50359,#50360,#50368,#50374) + ); +#50356 = ORIENTED_EDGE('',*,*,#50109,.F.); +#50357 = ORIENTED_EDGE('',*,*,#50167,.T.); +#50358 = ORIENTED_EDGE('',*,*,#50150,.F.); +#50359 = ORIENTED_EDGE('',*,*,#50317,.F.); +#50360 = ORIENTED_EDGE('',*,*,#50361,.T.); +#50361 = EDGE_CURVE('',#50310,#50362,#50364,.T.); +#50362 = VERTEX_POINT('',#50363); +#50363 = CARTESIAN_POINT('',(9.,-1.54,0.8)); +#50364 = LINE('',#50365,#50366); +#50365 = CARTESIAN_POINT('',(9.,-0.64,0.8)); +#50366 = VECTOR('',#50367,1.); +#50367 = DIRECTION('',(-0.,-1.,-0.)); +#50368 = ORIENTED_EDGE('',*,*,#50369,.F.); +#50369 = EDGE_CURVE('',#50335,#50362,#50370,.T.); +#50370 = LINE('',#50371,#50372); +#50371 = CARTESIAN_POINT('',(8.55,-1.54,0.8)); +#50372 = VECTOR('',#50373,1.); +#50373 = DIRECTION('',(1.,0.,0.)); +#50374 = ORIENTED_EDGE('',*,*,#50334,.F.); +#50375 = PLANE('',#50376); +#50376 = AXIS2_PLACEMENT_3D('',#50377,#50378,#50379); +#50377 = CARTESIAN_POINT('',(8.775,-1.09,0.8)); +#50378 = DIRECTION('',(0.,0.,1.)); +#50379 = DIRECTION('',(1.,0.,-0.)); +#50380 = ADVANCED_FACE('',(#50381),#50387,.T.); +#50381 = FACE_BOUND('',#50382,.F.); +#50382 = EDGE_LOOP('',(#50383,#50384,#50385,#50386)); +#50383 = ORIENTED_EDGE('',*,*,#50191,.T.); +#50384 = ORIENTED_EDGE('',*,*,#50239,.T.); +#50385 = ORIENTED_EDGE('',*,*,#50215,.F.); +#50386 = ORIENTED_EDGE('',*,*,#50254,.F.); +#50387 = PLANE('',#50388); +#50388 = AXIS2_PLACEMENT_3D('',#50389,#50390,#50391); +#50389 = CARTESIAN_POINT('',(8.55,-1.54,0.)); +#50390 = DIRECTION('',(-0.,-1.,-0.)); +#50391 = DIRECTION('',(0.,0.,-1.)); +#50392 = ADVANCED_FACE('',(#50393),#50404,.T.); +#50393 = FACE_BOUND('',#50394,.F.); +#50394 = EDGE_LOOP('',(#50395,#50396,#50397,#50403)); +#50395 = ORIENTED_EDGE('',*,*,#50342,.T.); +#50396 = ORIENTED_EDGE('',*,*,#50369,.T.); +#50397 = ORIENTED_EDGE('',*,*,#50398,.F.); +#50398 = EDGE_CURVE('',#50261,#50362,#50399,.T.); +#50399 = LINE('',#50400,#50401); +#50400 = CARTESIAN_POINT('',(9.,-1.54,0.4)); +#50401 = VECTOR('',#50402,1.); +#50402 = DIRECTION('',(0.,0.,1.)); +#50403 = ORIENTED_EDGE('',*,*,#50260,.F.); +#50404 = PLANE('',#50405); +#50405 = AXIS2_PLACEMENT_3D('',#50406,#50407,#50408); +#50406 = CARTESIAN_POINT('',(8.55,-1.54,0.4)); +#50407 = DIRECTION('',(-0.,-1.,-0.)); +#50408 = DIRECTION('',(-1.,0.,0.)); +#50409 = ADVANCED_FACE('',(#50410),#50416,.F.); +#50410 = FACE_BOUND('',#50411,.T.); +#50411 = EDGE_LOOP('',(#50412,#50413,#50414,#50415)); +#50412 = ORIENTED_EDGE('',*,*,#50292,.F.); +#50413 = ORIENTED_EDGE('',*,*,#50309,.T.); +#50414 = ORIENTED_EDGE('',*,*,#50361,.T.); +#50415 = ORIENTED_EDGE('',*,*,#50398,.F.); +#50416 = PLANE('',#50417); +#50417 = AXIS2_PLACEMENT_3D('',#50418,#50419,#50420); +#50418 = CARTESIAN_POINT('',(9.,-0.64,0.4)); +#50419 = DIRECTION('',(-1.,-0.,-0.)); +#50420 = DIRECTION('',(0.,1.,0.)); +#50421 = MANIFOLD_SOLID_BREP('',#50422); +#50422 = CLOSED_SHELL('',(#50423,#50463,#50494,#50525,#50575,#50606, + #50639,#50656,#50680,#50711,#50728,#50757,#50781,#50807,#50831, + #50858,#50870,#50887)); +#50423 = ADVANCED_FACE('',(#50424),#50458,.T.); +#50424 = FACE_BOUND('',#50425,.F.); +#50425 = EDGE_LOOP('',(#50426,#50436,#50444,#50452)); +#50426 = ORIENTED_EDGE('',*,*,#50427,.T.); +#50427 = EDGE_CURVE('',#50428,#50430,#50432,.T.); +#50428 = VERTEX_POINT('',#50429); +#50429 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50430 = VERTEX_POINT('',#50431); +#50431 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50432 = LINE('',#50433,#50434); +#50433 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50434 = VECTOR('',#50435,1.); +#50435 = DIRECTION('',(0.,0.,1.)); +#50436 = ORIENTED_EDGE('',*,*,#50437,.T.); +#50437 = EDGE_CURVE('',#50430,#50438,#50440,.T.); +#50438 = VERTEX_POINT('',#50439); +#50439 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50440 = LINE('',#50441,#50442); +#50441 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50442 = VECTOR('',#50443,1.); +#50443 = DIRECTION('',(-1.,-0.,-0.)); +#50444 = ORIENTED_EDGE('',*,*,#50445,.F.); +#50445 = EDGE_CURVE('',#50446,#50438,#50448,.T.); +#50446 = VERTEX_POINT('',#50447); +#50447 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50448 = LINE('',#50449,#50450); +#50449 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50450 = VECTOR('',#50451,1.); +#50451 = DIRECTION('',(0.,0.,1.)); +#50452 = ORIENTED_EDGE('',*,*,#50453,.F.); +#50453 = EDGE_CURVE('',#50428,#50446,#50454,.T.); +#50454 = LINE('',#50455,#50456); +#50455 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50456 = VECTOR('',#50457,1.); +#50457 = DIRECTION('',(-1.,-0.,-0.)); +#50458 = PLANE('',#50459); +#50459 = AXIS2_PLACEMENT_3D('',#50460,#50461,#50462); +#50460 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50461 = DIRECTION('',(0.,1.,0.)); +#50462 = DIRECTION('',(1.,0.,0.)); +#50463 = ADVANCED_FACE('',(#50464),#50489,.F.); +#50464 = FACE_BOUND('',#50465,.T.); +#50465 = EDGE_LOOP('',(#50466,#50474,#50475,#50483)); +#50466 = ORIENTED_EDGE('',*,*,#50467,.F.); +#50467 = EDGE_CURVE('',#50428,#50468,#50470,.T.); +#50468 = VERTEX_POINT('',#50469); +#50469 = CARTESIAN_POINT('',(9.,-2.085,0.)); +#50470 = LINE('',#50471,#50472); +#50471 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50472 = VECTOR('',#50473,1.); +#50473 = DIRECTION('',(-0.,-1.,-0.)); +#50474 = ORIENTED_EDGE('',*,*,#50427,.T.); +#50475 = ORIENTED_EDGE('',*,*,#50476,.T.); +#50476 = EDGE_CURVE('',#50430,#50477,#50479,.T.); +#50477 = VERTEX_POINT('',#50478); +#50478 = CARTESIAN_POINT('',(9.,-2.085,0.4)); +#50479 = LINE('',#50480,#50481); +#50480 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50481 = VECTOR('',#50482,1.); +#50482 = DIRECTION('',(-0.,-1.,-0.)); +#50483 = ORIENTED_EDGE('',*,*,#50484,.F.); +#50484 = EDGE_CURVE('',#50468,#50477,#50485,.T.); +#50485 = LINE('',#50486,#50487); +#50486 = CARTESIAN_POINT('',(9.,-2.085,0.8)); +#50487 = VECTOR('',#50488,1.); +#50488 = DIRECTION('',(0.,0.,1.)); +#50489 = PLANE('',#50490); +#50490 = AXIS2_PLACEMENT_3D('',#50491,#50492,#50493); +#50491 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50492 = DIRECTION('',(-1.,-0.,-0.)); +#50493 = DIRECTION('',(0.,1.,0.)); +#50494 = ADVANCED_FACE('',(#50495),#50520,.F.); +#50495 = FACE_BOUND('',#50496,.T.); +#50496 = EDGE_LOOP('',(#50497,#50505,#50513,#50519)); +#50497 = ORIENTED_EDGE('',*,*,#50498,.T.); +#50498 = EDGE_CURVE('',#50446,#50499,#50501,.T.); +#50499 = VERTEX_POINT('',#50500); +#50500 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#50501 = LINE('',#50502,#50503); +#50502 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50503 = VECTOR('',#50504,1.); +#50504 = DIRECTION('',(-1.,-0.,-0.)); +#50505 = ORIENTED_EDGE('',*,*,#50506,.T.); +#50506 = EDGE_CURVE('',#50499,#50507,#50509,.T.); +#50507 = VERTEX_POINT('',#50508); +#50508 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#50509 = LINE('',#50510,#50511); +#50510 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#50511 = VECTOR('',#50512,1.); +#50512 = DIRECTION('',(0.,0.,1.)); +#50513 = ORIENTED_EDGE('',*,*,#50514,.F.); +#50514 = EDGE_CURVE('',#50438,#50507,#50515,.T.); +#50515 = LINE('',#50516,#50517); +#50516 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50517 = VECTOR('',#50518,1.); +#50518 = DIRECTION('',(-1.,-0.,-0.)); +#50519 = ORIENTED_EDGE('',*,*,#50445,.F.); +#50520 = PLANE('',#50521); +#50521 = AXIS2_PLACEMENT_3D('',#50522,#50523,#50524); +#50522 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50523 = DIRECTION('',(-0.,-1.,-0.)); +#50524 = DIRECTION('',(0.,0.,-1.)); +#50525 = ADVANCED_FACE('',(#50526),#50570,.F.); +#50526 = FACE_BOUND('',#50527,.T.); +#50527 = EDGE_LOOP('',(#50528,#50529,#50530,#50539,#50548,#50556,#50564) + ); +#50528 = ORIENTED_EDGE('',*,*,#50453,.F.); +#50529 = ORIENTED_EDGE('',*,*,#50467,.T.); +#50530 = ORIENTED_EDGE('',*,*,#50531,.F.); +#50531 = EDGE_CURVE('',#50532,#50468,#50534,.T.); +#50532 = VERTEX_POINT('',#50533); +#50533 = CARTESIAN_POINT('',(8.725,-2.36,0.)); +#50534 = CIRCLE('',#50535,0.275); +#50535 = AXIS2_PLACEMENT_3D('',#50536,#50537,#50538); +#50536 = CARTESIAN_POINT('',(9.,-2.36,0.)); +#50537 = DIRECTION('',(0.,0.,-1.)); +#50538 = DIRECTION('',(-1.,-0.,-0.)); +#50539 = ORIENTED_EDGE('',*,*,#50540,.F.); +#50540 = EDGE_CURVE('',#50541,#50532,#50543,.T.); +#50541 = VERTEX_POINT('',#50542); +#50542 = CARTESIAN_POINT('',(9.,-2.635,0.)); +#50543 = CIRCLE('',#50544,0.275); +#50544 = AXIS2_PLACEMENT_3D('',#50545,#50546,#50547); +#50545 = CARTESIAN_POINT('',(9.,-2.36,0.)); +#50546 = DIRECTION('',(0.,0.,-1.)); +#50547 = DIRECTION('',(-1.,-0.,-0.)); +#50548 = ORIENTED_EDGE('',*,*,#50549,.T.); +#50549 = EDGE_CURVE('',#50541,#50550,#50552,.T.); +#50550 = VERTEX_POINT('',#50551); +#50551 = CARTESIAN_POINT('',(9.,-2.81,0.)); +#50552 = LINE('',#50553,#50554); +#50553 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50554 = VECTOR('',#50555,1.); +#50555 = DIRECTION('',(-0.,-1.,-0.)); +#50556 = ORIENTED_EDGE('',*,*,#50557,.F.); +#50557 = EDGE_CURVE('',#50558,#50550,#50560,.T.); +#50558 = VERTEX_POINT('',#50559); +#50559 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50560 = LINE('',#50561,#50562); +#50561 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50562 = VECTOR('',#50563,1.); +#50563 = DIRECTION('',(1.,0.,0.)); +#50564 = ORIENTED_EDGE('',*,*,#50565,.F.); +#50565 = EDGE_CURVE('',#50446,#50558,#50566,.T.); +#50566 = LINE('',#50567,#50568); +#50567 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50568 = VECTOR('',#50569,1.); +#50569 = DIRECTION('',(-0.,-1.,-0.)); +#50570 = PLANE('',#50571); +#50571 = AXIS2_PLACEMENT_3D('',#50572,#50573,#50574); +#50572 = CARTESIAN_POINT('',(8.775,-2.36,0.)); +#50573 = DIRECTION('',(0.,0.,1.)); +#50574 = DIRECTION('',(1.,0.,-0.)); +#50575 = ADVANCED_FACE('',(#50576),#50601,.T.); +#50576 = FACE_BOUND('',#50577,.F.); +#50577 = EDGE_LOOP('',(#50578,#50586,#50594,#50600)); +#50578 = ORIENTED_EDGE('',*,*,#50579,.T.); +#50579 = EDGE_CURVE('',#50430,#50580,#50582,.T.); +#50580 = VERTEX_POINT('',#50581); +#50581 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#50582 = LINE('',#50583,#50584); +#50583 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50584 = VECTOR('',#50585,1.); +#50585 = DIRECTION('',(0.,0.,1.)); +#50586 = ORIENTED_EDGE('',*,*,#50587,.T.); +#50587 = EDGE_CURVE('',#50580,#50588,#50590,.T.); +#50588 = VERTEX_POINT('',#50589); +#50589 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#50590 = LINE('',#50591,#50592); +#50591 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#50592 = VECTOR('',#50593,1.); +#50593 = DIRECTION('',(-1.,-0.,-0.)); +#50594 = ORIENTED_EDGE('',*,*,#50595,.F.); +#50595 = EDGE_CURVE('',#50438,#50588,#50596,.T.); +#50596 = LINE('',#50597,#50598); +#50597 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50598 = VECTOR('',#50599,1.); +#50599 = DIRECTION('',(0.,0.,1.)); +#50600 = ORIENTED_EDGE('',*,*,#50437,.F.); +#50601 = PLANE('',#50602); +#50602 = AXIS2_PLACEMENT_3D('',#50603,#50604,#50605); +#50603 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50604 = DIRECTION('',(0.,1.,0.)); +#50605 = DIRECTION('',(1.,0.,0.)); +#50606 = ADVANCED_FACE('',(#50607),#50634,.F.); +#50607 = FACE_BOUND('',#50608,.F.); +#50608 = EDGE_LOOP('',(#50609,#50617,#50618,#50619,#50627)); +#50609 = ORIENTED_EDGE('',*,*,#50610,.F.); +#50610 = EDGE_CURVE('',#50477,#50611,#50613,.T.); +#50611 = VERTEX_POINT('',#50612); +#50612 = CARTESIAN_POINT('',(9.,-2.085,0.8)); +#50613 = LINE('',#50614,#50615); +#50614 = CARTESIAN_POINT('',(9.,-2.085,0.8)); +#50615 = VECTOR('',#50616,1.); +#50616 = DIRECTION('',(0.,0.,1.)); +#50617 = ORIENTED_EDGE('',*,*,#50484,.F.); +#50618 = ORIENTED_EDGE('',*,*,#50531,.F.); +#50619 = ORIENTED_EDGE('',*,*,#50620,.F.); +#50620 = EDGE_CURVE('',#50621,#50532,#50623,.T.); +#50621 = VERTEX_POINT('',#50622); +#50622 = CARTESIAN_POINT('',(8.725,-2.36,0.8)); +#50623 = LINE('',#50624,#50625); +#50624 = CARTESIAN_POINT('',(8.725,-2.36,0.8)); +#50625 = VECTOR('',#50626,1.); +#50626 = DIRECTION('',(0.,0.,-1.)); +#50627 = ORIENTED_EDGE('',*,*,#50628,.T.); +#50628 = EDGE_CURVE('',#50621,#50611,#50629,.T.); +#50629 = CIRCLE('',#50630,0.275); +#50630 = AXIS2_PLACEMENT_3D('',#50631,#50632,#50633); +#50631 = CARTESIAN_POINT('',(9.,-2.36,0.8)); +#50632 = DIRECTION('',(0.,0.,-1.)); +#50633 = DIRECTION('',(-1.,-0.,-0.)); +#50634 = CYLINDRICAL_SURFACE('',#50635,0.275); +#50635 = AXIS2_PLACEMENT_3D('',#50636,#50637,#50638); +#50636 = CARTESIAN_POINT('',(9.,-2.36,0.8)); +#50637 = DIRECTION('',(0.,0.,1.)); +#50638 = DIRECTION('',(-1.,0.,0.)); +#50639 = ADVANCED_FACE('',(#50640),#50651,.F.); +#50640 = FACE_BOUND('',#50641,.T.); +#50641 = EDGE_LOOP('',(#50642,#50643,#50644,#50650)); +#50642 = ORIENTED_EDGE('',*,*,#50476,.F.); +#50643 = ORIENTED_EDGE('',*,*,#50579,.T.); +#50644 = ORIENTED_EDGE('',*,*,#50645,.T.); +#50645 = EDGE_CURVE('',#50580,#50611,#50646,.T.); +#50646 = LINE('',#50647,#50648); +#50647 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#50648 = VECTOR('',#50649,1.); +#50649 = DIRECTION('',(-0.,-1.,-0.)); +#50650 = ORIENTED_EDGE('',*,*,#50610,.F.); +#50651 = PLANE('',#50652); +#50652 = AXIS2_PLACEMENT_3D('',#50653,#50654,#50655); +#50653 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50654 = DIRECTION('',(-1.,-0.,-0.)); +#50655 = DIRECTION('',(0.,1.,0.)); +#50656 = ADVANCED_FACE('',(#50657),#50675,.T.); +#50657 = FACE_BOUND('',#50658,.F.); +#50658 = EDGE_LOOP('',(#50659,#50660,#50668,#50674)); +#50659 = ORIENTED_EDGE('',*,*,#50498,.T.); +#50660 = ORIENTED_EDGE('',*,*,#50661,.T.); +#50661 = EDGE_CURVE('',#50499,#50662,#50664,.T.); +#50662 = VERTEX_POINT('',#50663); +#50663 = CARTESIAN_POINT('',(8.15,-2.81,0.)); +#50664 = LINE('',#50665,#50666); +#50665 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#50666 = VECTOR('',#50667,1.); +#50667 = DIRECTION('',(-0.,-1.,-0.)); +#50668 = ORIENTED_EDGE('',*,*,#50669,.F.); +#50669 = EDGE_CURVE('',#50558,#50662,#50670,.T.); +#50670 = LINE('',#50671,#50672); +#50671 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50672 = VECTOR('',#50673,1.); +#50673 = DIRECTION('',(-1.,-0.,-0.)); +#50674 = ORIENTED_EDGE('',*,*,#50565,.F.); +#50675 = PLANE('',#50676); +#50676 = AXIS2_PLACEMENT_3D('',#50677,#50678,#50679); +#50677 = CARTESIAN_POINT('',(8.55,-1.91,0.)); +#50678 = DIRECTION('',(-0.,-0.,-1.)); +#50679 = DIRECTION('',(0.,1.,-0.)); +#50680 = ADVANCED_FACE('',(#50681),#50706,.F.); +#50681 = FACE_BOUND('',#50682,.T.); +#50682 = EDGE_LOOP('',(#50683,#50684,#50692,#50700)); +#50683 = ORIENTED_EDGE('',*,*,#50514,.T.); +#50684 = ORIENTED_EDGE('',*,*,#50685,.T.); +#50685 = EDGE_CURVE('',#50507,#50686,#50688,.T.); +#50686 = VERTEX_POINT('',#50687); +#50687 = CARTESIAN_POINT('',(8.15,-2.81,0.4)); +#50688 = LINE('',#50689,#50690); +#50689 = CARTESIAN_POINT('',(8.15,-1.91,0.4)); +#50690 = VECTOR('',#50691,1.); +#50691 = DIRECTION('',(-0.,-1.,-0.)); +#50692 = ORIENTED_EDGE('',*,*,#50693,.F.); +#50693 = EDGE_CURVE('',#50694,#50686,#50696,.T.); +#50694 = VERTEX_POINT('',#50695); +#50695 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#50696 = LINE('',#50697,#50698); +#50697 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#50698 = VECTOR('',#50699,1.); +#50699 = DIRECTION('',(-1.,-0.,-0.)); +#50700 = ORIENTED_EDGE('',*,*,#50701,.F.); +#50701 = EDGE_CURVE('',#50438,#50694,#50702,.T.); +#50702 = LINE('',#50703,#50704); +#50703 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50704 = VECTOR('',#50705,1.); +#50705 = DIRECTION('',(-0.,-1.,-0.)); +#50706 = PLANE('',#50707); +#50707 = AXIS2_PLACEMENT_3D('',#50708,#50709,#50710); +#50708 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50709 = DIRECTION('',(-0.,-0.,-1.)); +#50710 = DIRECTION('',(0.,1.,-0.)); +#50711 = ADVANCED_FACE('',(#50712),#50723,.T.); +#50712 = FACE_BOUND('',#50713,.F.); +#50713 = EDGE_LOOP('',(#50714,#50715,#50716,#50722)); +#50714 = ORIENTED_EDGE('',*,*,#50506,.T.); +#50715 = ORIENTED_EDGE('',*,*,#50685,.T.); +#50716 = ORIENTED_EDGE('',*,*,#50717,.F.); +#50717 = EDGE_CURVE('',#50662,#50686,#50718,.T.); +#50718 = LINE('',#50719,#50720); +#50719 = CARTESIAN_POINT('',(8.15,-2.81,0.)); +#50720 = VECTOR('',#50721,1.); +#50721 = DIRECTION('',(0.,0.,1.)); +#50722 = ORIENTED_EDGE('',*,*,#50661,.F.); +#50723 = PLANE('',#50724); +#50724 = AXIS2_PLACEMENT_3D('',#50725,#50726,#50727); +#50725 = CARTESIAN_POINT('',(8.15,-1.91,0.)); +#50726 = DIRECTION('',(-1.,-0.,-0.)); +#50727 = DIRECTION('',(0.,1.,0.)); +#50728 = ADVANCED_FACE('',(#50729),#50752,.T.); +#50729 = FACE_BOUND('',#50730,.F.); +#50730 = EDGE_LOOP('',(#50731,#50737,#50745,#50751)); +#50731 = ORIENTED_EDGE('',*,*,#50732,.T.); +#50732 = EDGE_CURVE('',#50558,#50694,#50733,.T.); +#50733 = LINE('',#50734,#50735); +#50734 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50735 = VECTOR('',#50736,1.); +#50736 = DIRECTION('',(0.,0.,1.)); +#50737 = ORIENTED_EDGE('',*,*,#50738,.T.); +#50738 = EDGE_CURVE('',#50694,#50739,#50741,.T.); +#50739 = VERTEX_POINT('',#50740); +#50740 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#50741 = LINE('',#50742,#50743); +#50742 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#50743 = VECTOR('',#50744,1.); +#50744 = DIRECTION('',(1.,0.,0.)); +#50745 = ORIENTED_EDGE('',*,*,#50746,.F.); +#50746 = EDGE_CURVE('',#50550,#50739,#50747,.T.); +#50747 = LINE('',#50748,#50749); +#50748 = CARTESIAN_POINT('',(9.,-2.81,0.)); +#50749 = VECTOR('',#50750,1.); +#50750 = DIRECTION('',(0.,0.,1.)); +#50751 = ORIENTED_EDGE('',*,*,#50557,.F.); +#50752 = PLANE('',#50753); +#50753 = AXIS2_PLACEMENT_3D('',#50754,#50755,#50756); +#50754 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50755 = DIRECTION('',(-0.,-1.,-0.)); +#50756 = DIRECTION('',(-1.,0.,0.)); +#50757 = ADVANCED_FACE('',(#50758),#50776,.F.); +#50758 = FACE_BOUND('',#50759,.T.); +#50759 = EDGE_LOOP('',(#50760,#50761,#50769,#50775)); +#50760 = ORIENTED_EDGE('',*,*,#50549,.F.); +#50761 = ORIENTED_EDGE('',*,*,#50762,.T.); +#50762 = EDGE_CURVE('',#50541,#50763,#50765,.T.); +#50763 = VERTEX_POINT('',#50764); +#50764 = CARTESIAN_POINT('',(9.,-2.635,0.4)); +#50765 = LINE('',#50766,#50767); +#50766 = CARTESIAN_POINT('',(9.,-2.635,0.8)); +#50767 = VECTOR('',#50768,1.); +#50768 = DIRECTION('',(0.,0.,1.)); +#50769 = ORIENTED_EDGE('',*,*,#50770,.T.); +#50770 = EDGE_CURVE('',#50763,#50739,#50771,.T.); +#50771 = LINE('',#50772,#50773); +#50772 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50773 = VECTOR('',#50774,1.); +#50774 = DIRECTION('',(-0.,-1.,-0.)); +#50775 = ORIENTED_EDGE('',*,*,#50746,.F.); +#50776 = PLANE('',#50777); +#50777 = AXIS2_PLACEMENT_3D('',#50778,#50779,#50780); +#50778 = CARTESIAN_POINT('',(9.,-1.91,0.)); +#50779 = DIRECTION('',(-1.,-0.,-0.)); +#50780 = DIRECTION('',(0.,1.,0.)); +#50781 = ADVANCED_FACE('',(#50782),#50802,.F.); +#50782 = FACE_BOUND('',#50783,.F.); +#50783 = EDGE_LOOP('',(#50784,#50785,#50786,#50794,#50801)); +#50784 = ORIENTED_EDGE('',*,*,#50540,.F.); +#50785 = ORIENTED_EDGE('',*,*,#50762,.T.); +#50786 = ORIENTED_EDGE('',*,*,#50787,.T.); +#50787 = EDGE_CURVE('',#50763,#50788,#50790,.T.); +#50788 = VERTEX_POINT('',#50789); +#50789 = CARTESIAN_POINT('',(9.,-2.635,0.8)); +#50790 = LINE('',#50791,#50792); +#50791 = CARTESIAN_POINT('',(9.,-2.635,0.8)); +#50792 = VECTOR('',#50793,1.); +#50793 = DIRECTION('',(0.,0.,1.)); +#50794 = ORIENTED_EDGE('',*,*,#50795,.T.); +#50795 = EDGE_CURVE('',#50788,#50621,#50796,.T.); +#50796 = CIRCLE('',#50797,0.275); +#50797 = AXIS2_PLACEMENT_3D('',#50798,#50799,#50800); +#50798 = CARTESIAN_POINT('',(9.,-2.36,0.8)); +#50799 = DIRECTION('',(0.,0.,-1.)); +#50800 = DIRECTION('',(-1.,-0.,-0.)); +#50801 = ORIENTED_EDGE('',*,*,#50620,.T.); +#50802 = CYLINDRICAL_SURFACE('',#50803,0.275); +#50803 = AXIS2_PLACEMENT_3D('',#50804,#50805,#50806); +#50804 = CARTESIAN_POINT('',(9.,-2.36,0.8)); +#50805 = DIRECTION('',(0.,0.,1.)); +#50806 = DIRECTION('',(-1.,0.,0.)); +#50807 = ADVANCED_FACE('',(#50808),#50826,.T.); +#50808 = FACE_BOUND('',#50809,.F.); +#50809 = EDGE_LOOP('',(#50810,#50811,#50819,#50825)); +#50810 = ORIENTED_EDGE('',*,*,#50595,.T.); +#50811 = ORIENTED_EDGE('',*,*,#50812,.T.); +#50812 = EDGE_CURVE('',#50588,#50813,#50815,.T.); +#50813 = VERTEX_POINT('',#50814); +#50814 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#50815 = LINE('',#50816,#50817); +#50816 = CARTESIAN_POINT('',(8.55,-1.91,0.8)); +#50817 = VECTOR('',#50818,1.); +#50818 = DIRECTION('',(-0.,-1.,-0.)); +#50819 = ORIENTED_EDGE('',*,*,#50820,.F.); +#50820 = EDGE_CURVE('',#50694,#50813,#50821,.T.); +#50821 = LINE('',#50822,#50823); +#50822 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#50823 = VECTOR('',#50824,1.); +#50824 = DIRECTION('',(0.,0.,1.)); +#50825 = ORIENTED_EDGE('',*,*,#50701,.F.); +#50826 = PLANE('',#50827); +#50827 = AXIS2_PLACEMENT_3D('',#50828,#50829,#50830); +#50828 = CARTESIAN_POINT('',(8.55,-1.91,0.4)); +#50829 = DIRECTION('',(-1.,-0.,-0.)); +#50830 = DIRECTION('',(0.,1.,0.)); +#50831 = ADVANCED_FACE('',(#50832),#50853,.T.); +#50832 = FACE_BOUND('',#50833,.F.); +#50833 = EDGE_LOOP('',(#50834,#50835,#50836,#50837,#50838,#50846,#50852) + ); +#50834 = ORIENTED_EDGE('',*,*,#50587,.F.); +#50835 = ORIENTED_EDGE('',*,*,#50645,.T.); +#50836 = ORIENTED_EDGE('',*,*,#50628,.F.); +#50837 = ORIENTED_EDGE('',*,*,#50795,.F.); +#50838 = ORIENTED_EDGE('',*,*,#50839,.T.); +#50839 = EDGE_CURVE('',#50788,#50840,#50842,.T.); +#50840 = VERTEX_POINT('',#50841); +#50841 = CARTESIAN_POINT('',(9.,-2.81,0.8)); +#50842 = LINE('',#50843,#50844); +#50843 = CARTESIAN_POINT('',(9.,-1.91,0.8)); +#50844 = VECTOR('',#50845,1.); +#50845 = DIRECTION('',(-0.,-1.,-0.)); +#50846 = ORIENTED_EDGE('',*,*,#50847,.F.); +#50847 = EDGE_CURVE('',#50813,#50840,#50848,.T.); +#50848 = LINE('',#50849,#50850); +#50849 = CARTESIAN_POINT('',(8.55,-2.81,0.8)); +#50850 = VECTOR('',#50851,1.); +#50851 = DIRECTION('',(1.,0.,0.)); +#50852 = ORIENTED_EDGE('',*,*,#50812,.F.); +#50853 = PLANE('',#50854); +#50854 = AXIS2_PLACEMENT_3D('',#50855,#50856,#50857); +#50855 = CARTESIAN_POINT('',(8.775,-2.36,0.8)); +#50856 = DIRECTION('',(0.,0.,1.)); +#50857 = DIRECTION('',(1.,0.,-0.)); +#50858 = ADVANCED_FACE('',(#50859),#50865,.T.); +#50859 = FACE_BOUND('',#50860,.F.); +#50860 = EDGE_LOOP('',(#50861,#50862,#50863,#50864)); +#50861 = ORIENTED_EDGE('',*,*,#50669,.T.); +#50862 = ORIENTED_EDGE('',*,*,#50717,.T.); +#50863 = ORIENTED_EDGE('',*,*,#50693,.F.); +#50864 = ORIENTED_EDGE('',*,*,#50732,.F.); +#50865 = PLANE('',#50866); +#50866 = AXIS2_PLACEMENT_3D('',#50867,#50868,#50869); +#50867 = CARTESIAN_POINT('',(8.55,-2.81,0.)); +#50868 = DIRECTION('',(-0.,-1.,-0.)); +#50869 = DIRECTION('',(0.,0.,-1.)); +#50870 = ADVANCED_FACE('',(#50871),#50882,.T.); +#50871 = FACE_BOUND('',#50872,.F.); +#50872 = EDGE_LOOP('',(#50873,#50874,#50875,#50881)); +#50873 = ORIENTED_EDGE('',*,*,#50820,.T.); +#50874 = ORIENTED_EDGE('',*,*,#50847,.T.); +#50875 = ORIENTED_EDGE('',*,*,#50876,.F.); +#50876 = EDGE_CURVE('',#50739,#50840,#50877,.T.); +#50877 = LINE('',#50878,#50879); +#50878 = CARTESIAN_POINT('',(9.,-2.81,0.4)); +#50879 = VECTOR('',#50880,1.); +#50880 = DIRECTION('',(0.,0.,1.)); +#50881 = ORIENTED_EDGE('',*,*,#50738,.F.); +#50882 = PLANE('',#50883); +#50883 = AXIS2_PLACEMENT_3D('',#50884,#50885,#50886); +#50884 = CARTESIAN_POINT('',(8.55,-2.81,0.4)); +#50885 = DIRECTION('',(-0.,-1.,-0.)); +#50886 = DIRECTION('',(-1.,0.,0.)); +#50887 = ADVANCED_FACE('',(#50888),#50894,.F.); +#50888 = FACE_BOUND('',#50889,.T.); +#50889 = EDGE_LOOP('',(#50890,#50891,#50892,#50893)); +#50890 = ORIENTED_EDGE('',*,*,#50770,.F.); +#50891 = ORIENTED_EDGE('',*,*,#50787,.T.); +#50892 = ORIENTED_EDGE('',*,*,#50839,.T.); +#50893 = ORIENTED_EDGE('',*,*,#50876,.F.); +#50894 = PLANE('',#50895); +#50895 = AXIS2_PLACEMENT_3D('',#50896,#50897,#50898); +#50896 = CARTESIAN_POINT('',(9.,-1.91,0.4)); +#50897 = DIRECTION('',(-1.,-0.,-0.)); +#50898 = DIRECTION('',(0.,1.,0.)); +#50899 = MANIFOLD_SOLID_BREP('',#50900); +#50900 = CLOSED_SHELL('',(#50901,#50941,#50972,#51003,#51053,#51084, + #51117,#51134,#51158,#51189,#51206,#51235,#51259,#51285,#51309, + #51336,#51348,#51365)); +#50901 = ADVANCED_FACE('',(#50902),#50936,.T.); +#50902 = FACE_BOUND('',#50903,.F.); +#50903 = EDGE_LOOP('',(#50904,#50914,#50922,#50930)); +#50904 = ORIENTED_EDGE('',*,*,#50905,.T.); +#50905 = EDGE_CURVE('',#50906,#50908,#50910,.T.); +#50906 = VERTEX_POINT('',#50907); +#50907 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50908 = VERTEX_POINT('',#50909); +#50909 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#50910 = LINE('',#50911,#50912); +#50911 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50912 = VECTOR('',#50913,1.); +#50913 = DIRECTION('',(0.,0.,1.)); +#50914 = ORIENTED_EDGE('',*,*,#50915,.T.); +#50915 = EDGE_CURVE('',#50908,#50916,#50918,.T.); +#50916 = VERTEX_POINT('',#50917); +#50917 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#50918 = LINE('',#50919,#50920); +#50919 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#50920 = VECTOR('',#50921,1.); +#50921 = DIRECTION('',(-1.,-0.,-0.)); +#50922 = ORIENTED_EDGE('',*,*,#50923,.F.); +#50923 = EDGE_CURVE('',#50924,#50916,#50926,.T.); +#50924 = VERTEX_POINT('',#50925); +#50925 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#50926 = LINE('',#50927,#50928); +#50927 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#50928 = VECTOR('',#50929,1.); +#50929 = DIRECTION('',(0.,0.,1.)); +#50930 = ORIENTED_EDGE('',*,*,#50931,.F.); +#50931 = EDGE_CURVE('',#50906,#50924,#50932,.T.); +#50932 = LINE('',#50933,#50934); +#50933 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50934 = VECTOR('',#50935,1.); +#50935 = DIRECTION('',(-1.,-0.,-0.)); +#50936 = PLANE('',#50937); +#50937 = AXIS2_PLACEMENT_3D('',#50938,#50939,#50940); +#50938 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50939 = DIRECTION('',(0.,1.,0.)); +#50940 = DIRECTION('',(1.,0.,0.)); +#50941 = ADVANCED_FACE('',(#50942),#50967,.F.); +#50942 = FACE_BOUND('',#50943,.T.); +#50943 = EDGE_LOOP('',(#50944,#50952,#50953,#50961)); +#50944 = ORIENTED_EDGE('',*,*,#50945,.F.); +#50945 = EDGE_CURVE('',#50906,#50946,#50948,.T.); +#50946 = VERTEX_POINT('',#50947); +#50947 = CARTESIAN_POINT('',(9.,-3.355,0.)); +#50948 = LINE('',#50949,#50950); +#50949 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50950 = VECTOR('',#50951,1.); +#50951 = DIRECTION('',(-0.,-1.,-0.)); +#50952 = ORIENTED_EDGE('',*,*,#50905,.T.); +#50953 = ORIENTED_EDGE('',*,*,#50954,.T.); +#50954 = EDGE_CURVE('',#50908,#50955,#50957,.T.); +#50955 = VERTEX_POINT('',#50956); +#50956 = CARTESIAN_POINT('',(9.,-3.355,0.4)); +#50957 = LINE('',#50958,#50959); +#50958 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#50959 = VECTOR('',#50960,1.); +#50960 = DIRECTION('',(-0.,-1.,-0.)); +#50961 = ORIENTED_EDGE('',*,*,#50962,.F.); +#50962 = EDGE_CURVE('',#50946,#50955,#50963,.T.); +#50963 = LINE('',#50964,#50965); +#50964 = CARTESIAN_POINT('',(9.,-3.355,0.8)); +#50965 = VECTOR('',#50966,1.); +#50966 = DIRECTION('',(0.,0.,1.)); +#50967 = PLANE('',#50968); +#50968 = AXIS2_PLACEMENT_3D('',#50969,#50970,#50971); +#50969 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#50970 = DIRECTION('',(-1.,-0.,-0.)); +#50971 = DIRECTION('',(0.,1.,0.)); +#50972 = ADVANCED_FACE('',(#50973),#50998,.F.); +#50973 = FACE_BOUND('',#50974,.T.); +#50974 = EDGE_LOOP('',(#50975,#50983,#50991,#50997)); +#50975 = ORIENTED_EDGE('',*,*,#50976,.T.); +#50976 = EDGE_CURVE('',#50924,#50977,#50979,.T.); +#50977 = VERTEX_POINT('',#50978); +#50978 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#50979 = LINE('',#50980,#50981); +#50980 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#50981 = VECTOR('',#50982,1.); +#50982 = DIRECTION('',(-1.,-0.,-0.)); +#50983 = ORIENTED_EDGE('',*,*,#50984,.T.); +#50984 = EDGE_CURVE('',#50977,#50985,#50987,.T.); +#50985 = VERTEX_POINT('',#50986); +#50986 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#50987 = LINE('',#50988,#50989); +#50988 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#50989 = VECTOR('',#50990,1.); +#50990 = DIRECTION('',(0.,0.,1.)); +#50991 = ORIENTED_EDGE('',*,*,#50992,.F.); +#50992 = EDGE_CURVE('',#50916,#50985,#50993,.T.); +#50993 = LINE('',#50994,#50995); +#50994 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#50995 = VECTOR('',#50996,1.); +#50996 = DIRECTION('',(-1.,-0.,-0.)); +#50997 = ORIENTED_EDGE('',*,*,#50923,.F.); +#50998 = PLANE('',#50999); +#50999 = AXIS2_PLACEMENT_3D('',#51000,#51001,#51002); +#51000 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#51001 = DIRECTION('',(-0.,-1.,-0.)); +#51002 = DIRECTION('',(0.,0.,-1.)); +#51003 = ADVANCED_FACE('',(#51004),#51048,.F.); +#51004 = FACE_BOUND('',#51005,.T.); +#51005 = EDGE_LOOP('',(#51006,#51007,#51008,#51017,#51026,#51034,#51042) + ); +#51006 = ORIENTED_EDGE('',*,*,#50931,.F.); +#51007 = ORIENTED_EDGE('',*,*,#50945,.T.); +#51008 = ORIENTED_EDGE('',*,*,#51009,.F.); +#51009 = EDGE_CURVE('',#51010,#50946,#51012,.T.); +#51010 = VERTEX_POINT('',#51011); +#51011 = CARTESIAN_POINT('',(8.725,-3.63,0.)); +#51012 = CIRCLE('',#51013,0.275); +#51013 = AXIS2_PLACEMENT_3D('',#51014,#51015,#51016); +#51014 = CARTESIAN_POINT('',(9.,-3.63,0.)); +#51015 = DIRECTION('',(0.,0.,-1.)); +#51016 = DIRECTION('',(-1.,-0.,-0.)); +#51017 = ORIENTED_EDGE('',*,*,#51018,.F.); +#51018 = EDGE_CURVE('',#51019,#51010,#51021,.T.); +#51019 = VERTEX_POINT('',#51020); +#51020 = CARTESIAN_POINT('',(9.,-3.905,0.)); +#51021 = CIRCLE('',#51022,0.275); +#51022 = AXIS2_PLACEMENT_3D('',#51023,#51024,#51025); +#51023 = CARTESIAN_POINT('',(9.,-3.63,0.)); +#51024 = DIRECTION('',(0.,0.,-1.)); +#51025 = DIRECTION('',(-1.,-0.,-0.)); +#51026 = ORIENTED_EDGE('',*,*,#51027,.T.); +#51027 = EDGE_CURVE('',#51019,#51028,#51030,.T.); +#51028 = VERTEX_POINT('',#51029); +#51029 = CARTESIAN_POINT('',(9.,-4.08,0.)); +#51030 = LINE('',#51031,#51032); +#51031 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#51032 = VECTOR('',#51033,1.); +#51033 = DIRECTION('',(-0.,-1.,-0.)); +#51034 = ORIENTED_EDGE('',*,*,#51035,.F.); +#51035 = EDGE_CURVE('',#51036,#51028,#51038,.T.); +#51036 = VERTEX_POINT('',#51037); +#51037 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51038 = LINE('',#51039,#51040); +#51039 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51040 = VECTOR('',#51041,1.); +#51041 = DIRECTION('',(1.,0.,0.)); +#51042 = ORIENTED_EDGE('',*,*,#51043,.F.); +#51043 = EDGE_CURVE('',#50924,#51036,#51044,.T.); +#51044 = LINE('',#51045,#51046); +#51045 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#51046 = VECTOR('',#51047,1.); +#51047 = DIRECTION('',(-0.,-1.,-0.)); +#51048 = PLANE('',#51049); +#51049 = AXIS2_PLACEMENT_3D('',#51050,#51051,#51052); +#51050 = CARTESIAN_POINT('',(8.775,-3.63,0.)); +#51051 = DIRECTION('',(0.,0.,1.)); +#51052 = DIRECTION('',(1.,0.,-0.)); +#51053 = ADVANCED_FACE('',(#51054),#51079,.T.); +#51054 = FACE_BOUND('',#51055,.F.); +#51055 = EDGE_LOOP('',(#51056,#51064,#51072,#51078)); +#51056 = ORIENTED_EDGE('',*,*,#51057,.T.); +#51057 = EDGE_CURVE('',#50908,#51058,#51060,.T.); +#51058 = VERTEX_POINT('',#51059); +#51059 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#51060 = LINE('',#51061,#51062); +#51061 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#51062 = VECTOR('',#51063,1.); +#51063 = DIRECTION('',(0.,0.,1.)); +#51064 = ORIENTED_EDGE('',*,*,#51065,.T.); +#51065 = EDGE_CURVE('',#51058,#51066,#51068,.T.); +#51066 = VERTEX_POINT('',#51067); +#51067 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#51068 = LINE('',#51069,#51070); +#51069 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#51070 = VECTOR('',#51071,1.); +#51071 = DIRECTION('',(-1.,-0.,-0.)); +#51072 = ORIENTED_EDGE('',*,*,#51073,.F.); +#51073 = EDGE_CURVE('',#50916,#51066,#51074,.T.); +#51074 = LINE('',#51075,#51076); +#51075 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#51076 = VECTOR('',#51077,1.); +#51077 = DIRECTION('',(0.,0.,1.)); +#51078 = ORIENTED_EDGE('',*,*,#50915,.F.); +#51079 = PLANE('',#51080); +#51080 = AXIS2_PLACEMENT_3D('',#51081,#51082,#51083); +#51081 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#51082 = DIRECTION('',(0.,1.,0.)); +#51083 = DIRECTION('',(1.,0.,0.)); +#51084 = ADVANCED_FACE('',(#51085),#51112,.F.); +#51085 = FACE_BOUND('',#51086,.F.); +#51086 = EDGE_LOOP('',(#51087,#51095,#51096,#51097,#51105)); +#51087 = ORIENTED_EDGE('',*,*,#51088,.F.); +#51088 = EDGE_CURVE('',#50955,#51089,#51091,.T.); +#51089 = VERTEX_POINT('',#51090); +#51090 = CARTESIAN_POINT('',(9.,-3.355,0.8)); +#51091 = LINE('',#51092,#51093); +#51092 = CARTESIAN_POINT('',(9.,-3.355,0.8)); +#51093 = VECTOR('',#51094,1.); +#51094 = DIRECTION('',(0.,0.,1.)); +#51095 = ORIENTED_EDGE('',*,*,#50962,.F.); +#51096 = ORIENTED_EDGE('',*,*,#51009,.F.); +#51097 = ORIENTED_EDGE('',*,*,#51098,.F.); +#51098 = EDGE_CURVE('',#51099,#51010,#51101,.T.); +#51099 = VERTEX_POINT('',#51100); +#51100 = CARTESIAN_POINT('',(8.725,-3.63,0.8)); +#51101 = LINE('',#51102,#51103); +#51102 = CARTESIAN_POINT('',(8.725,-3.63,0.8)); +#51103 = VECTOR('',#51104,1.); +#51104 = DIRECTION('',(0.,0.,-1.)); +#51105 = ORIENTED_EDGE('',*,*,#51106,.T.); +#51106 = EDGE_CURVE('',#51099,#51089,#51107,.T.); +#51107 = CIRCLE('',#51108,0.275); +#51108 = AXIS2_PLACEMENT_3D('',#51109,#51110,#51111); +#51109 = CARTESIAN_POINT('',(9.,-3.63,0.8)); +#51110 = DIRECTION('',(0.,0.,-1.)); +#51111 = DIRECTION('',(-1.,-0.,-0.)); +#51112 = CYLINDRICAL_SURFACE('',#51113,0.275); +#51113 = AXIS2_PLACEMENT_3D('',#51114,#51115,#51116); +#51114 = CARTESIAN_POINT('',(9.,-3.63,0.8)); +#51115 = DIRECTION('',(0.,0.,1.)); +#51116 = DIRECTION('',(-1.,0.,0.)); +#51117 = ADVANCED_FACE('',(#51118),#51129,.F.); +#51118 = FACE_BOUND('',#51119,.T.); +#51119 = EDGE_LOOP('',(#51120,#51121,#51122,#51128)); +#51120 = ORIENTED_EDGE('',*,*,#50954,.F.); +#51121 = ORIENTED_EDGE('',*,*,#51057,.T.); +#51122 = ORIENTED_EDGE('',*,*,#51123,.T.); +#51123 = EDGE_CURVE('',#51058,#51089,#51124,.T.); +#51124 = LINE('',#51125,#51126); +#51125 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#51126 = VECTOR('',#51127,1.); +#51127 = DIRECTION('',(-0.,-1.,-0.)); +#51128 = ORIENTED_EDGE('',*,*,#51088,.F.); +#51129 = PLANE('',#51130); +#51130 = AXIS2_PLACEMENT_3D('',#51131,#51132,#51133); +#51131 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#51132 = DIRECTION('',(-1.,-0.,-0.)); +#51133 = DIRECTION('',(0.,1.,0.)); +#51134 = ADVANCED_FACE('',(#51135),#51153,.T.); +#51135 = FACE_BOUND('',#51136,.F.); +#51136 = EDGE_LOOP('',(#51137,#51138,#51146,#51152)); +#51137 = ORIENTED_EDGE('',*,*,#50976,.T.); +#51138 = ORIENTED_EDGE('',*,*,#51139,.T.); +#51139 = EDGE_CURVE('',#50977,#51140,#51142,.T.); +#51140 = VERTEX_POINT('',#51141); +#51141 = CARTESIAN_POINT('',(8.15,-4.08,0.)); +#51142 = LINE('',#51143,#51144); +#51143 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#51144 = VECTOR('',#51145,1.); +#51145 = DIRECTION('',(-0.,-1.,-0.)); +#51146 = ORIENTED_EDGE('',*,*,#51147,.F.); +#51147 = EDGE_CURVE('',#51036,#51140,#51148,.T.); +#51148 = LINE('',#51149,#51150); +#51149 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51150 = VECTOR('',#51151,1.); +#51151 = DIRECTION('',(-1.,-0.,-0.)); +#51152 = ORIENTED_EDGE('',*,*,#51043,.F.); +#51153 = PLANE('',#51154); +#51154 = AXIS2_PLACEMENT_3D('',#51155,#51156,#51157); +#51155 = CARTESIAN_POINT('',(8.55,-3.18,0.)); +#51156 = DIRECTION('',(-0.,-0.,-1.)); +#51157 = DIRECTION('',(0.,1.,-0.)); +#51158 = ADVANCED_FACE('',(#51159),#51184,.F.); +#51159 = FACE_BOUND('',#51160,.T.); +#51160 = EDGE_LOOP('',(#51161,#51162,#51170,#51178)); +#51161 = ORIENTED_EDGE('',*,*,#50992,.T.); +#51162 = ORIENTED_EDGE('',*,*,#51163,.T.); +#51163 = EDGE_CURVE('',#50985,#51164,#51166,.T.); +#51164 = VERTEX_POINT('',#51165); +#51165 = CARTESIAN_POINT('',(8.15,-4.08,0.4)); +#51166 = LINE('',#51167,#51168); +#51167 = CARTESIAN_POINT('',(8.15,-3.18,0.4)); +#51168 = VECTOR('',#51169,1.); +#51169 = DIRECTION('',(-0.,-1.,-0.)); +#51170 = ORIENTED_EDGE('',*,*,#51171,.F.); +#51171 = EDGE_CURVE('',#51172,#51164,#51174,.T.); +#51172 = VERTEX_POINT('',#51173); +#51173 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#51174 = LINE('',#51175,#51176); +#51175 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#51176 = VECTOR('',#51177,1.); +#51177 = DIRECTION('',(-1.,-0.,-0.)); +#51178 = ORIENTED_EDGE('',*,*,#51179,.F.); +#51179 = EDGE_CURVE('',#50916,#51172,#51180,.T.); +#51180 = LINE('',#51181,#51182); +#51181 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#51182 = VECTOR('',#51183,1.); +#51183 = DIRECTION('',(-0.,-1.,-0.)); +#51184 = PLANE('',#51185); +#51185 = AXIS2_PLACEMENT_3D('',#51186,#51187,#51188); +#51186 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#51187 = DIRECTION('',(-0.,-0.,-1.)); +#51188 = DIRECTION('',(0.,1.,-0.)); +#51189 = ADVANCED_FACE('',(#51190),#51201,.T.); +#51190 = FACE_BOUND('',#51191,.F.); +#51191 = EDGE_LOOP('',(#51192,#51193,#51194,#51200)); +#51192 = ORIENTED_EDGE('',*,*,#50984,.T.); +#51193 = ORIENTED_EDGE('',*,*,#51163,.T.); +#51194 = ORIENTED_EDGE('',*,*,#51195,.F.); +#51195 = EDGE_CURVE('',#51140,#51164,#51196,.T.); +#51196 = LINE('',#51197,#51198); +#51197 = CARTESIAN_POINT('',(8.15,-4.08,0.)); +#51198 = VECTOR('',#51199,1.); +#51199 = DIRECTION('',(0.,0.,1.)); +#51200 = ORIENTED_EDGE('',*,*,#51139,.F.); +#51201 = PLANE('',#51202); +#51202 = AXIS2_PLACEMENT_3D('',#51203,#51204,#51205); +#51203 = CARTESIAN_POINT('',(8.15,-3.18,0.)); +#51204 = DIRECTION('',(-1.,-0.,-0.)); +#51205 = DIRECTION('',(0.,1.,0.)); +#51206 = ADVANCED_FACE('',(#51207),#51230,.T.); +#51207 = FACE_BOUND('',#51208,.F.); +#51208 = EDGE_LOOP('',(#51209,#51215,#51223,#51229)); +#51209 = ORIENTED_EDGE('',*,*,#51210,.T.); +#51210 = EDGE_CURVE('',#51036,#51172,#51211,.T.); +#51211 = LINE('',#51212,#51213); +#51212 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51213 = VECTOR('',#51214,1.); +#51214 = DIRECTION('',(0.,0.,1.)); +#51215 = ORIENTED_EDGE('',*,*,#51216,.T.); +#51216 = EDGE_CURVE('',#51172,#51217,#51219,.T.); +#51217 = VERTEX_POINT('',#51218); +#51218 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#51219 = LINE('',#51220,#51221); +#51220 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#51221 = VECTOR('',#51222,1.); +#51222 = DIRECTION('',(1.,0.,0.)); +#51223 = ORIENTED_EDGE('',*,*,#51224,.F.); +#51224 = EDGE_CURVE('',#51028,#51217,#51225,.T.); +#51225 = LINE('',#51226,#51227); +#51226 = CARTESIAN_POINT('',(9.,-4.08,0.)); +#51227 = VECTOR('',#51228,1.); +#51228 = DIRECTION('',(0.,0.,1.)); +#51229 = ORIENTED_EDGE('',*,*,#51035,.F.); +#51230 = PLANE('',#51231); +#51231 = AXIS2_PLACEMENT_3D('',#51232,#51233,#51234); +#51232 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51233 = DIRECTION('',(-0.,-1.,-0.)); +#51234 = DIRECTION('',(-1.,0.,0.)); +#51235 = ADVANCED_FACE('',(#51236),#51254,.F.); +#51236 = FACE_BOUND('',#51237,.T.); +#51237 = EDGE_LOOP('',(#51238,#51239,#51247,#51253)); +#51238 = ORIENTED_EDGE('',*,*,#51027,.F.); +#51239 = ORIENTED_EDGE('',*,*,#51240,.T.); +#51240 = EDGE_CURVE('',#51019,#51241,#51243,.T.); +#51241 = VERTEX_POINT('',#51242); +#51242 = CARTESIAN_POINT('',(9.,-3.905,0.4)); +#51243 = LINE('',#51244,#51245); +#51244 = CARTESIAN_POINT('',(9.,-3.905,0.8)); +#51245 = VECTOR('',#51246,1.); +#51246 = DIRECTION('',(0.,0.,1.)); +#51247 = ORIENTED_EDGE('',*,*,#51248,.T.); +#51248 = EDGE_CURVE('',#51241,#51217,#51249,.T.); +#51249 = LINE('',#51250,#51251); +#51250 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#51251 = VECTOR('',#51252,1.); +#51252 = DIRECTION('',(-0.,-1.,-0.)); +#51253 = ORIENTED_EDGE('',*,*,#51224,.F.); +#51254 = PLANE('',#51255); +#51255 = AXIS2_PLACEMENT_3D('',#51256,#51257,#51258); +#51256 = CARTESIAN_POINT('',(9.,-3.18,0.)); +#51257 = DIRECTION('',(-1.,-0.,-0.)); +#51258 = DIRECTION('',(0.,1.,0.)); +#51259 = ADVANCED_FACE('',(#51260),#51280,.F.); +#51260 = FACE_BOUND('',#51261,.F.); +#51261 = EDGE_LOOP('',(#51262,#51263,#51264,#51272,#51279)); +#51262 = ORIENTED_EDGE('',*,*,#51018,.F.); +#51263 = ORIENTED_EDGE('',*,*,#51240,.T.); +#51264 = ORIENTED_EDGE('',*,*,#51265,.T.); +#51265 = EDGE_CURVE('',#51241,#51266,#51268,.T.); +#51266 = VERTEX_POINT('',#51267); +#51267 = CARTESIAN_POINT('',(9.,-3.905,0.8)); +#51268 = LINE('',#51269,#51270); +#51269 = CARTESIAN_POINT('',(9.,-3.905,0.8)); +#51270 = VECTOR('',#51271,1.); +#51271 = DIRECTION('',(0.,0.,1.)); +#51272 = ORIENTED_EDGE('',*,*,#51273,.T.); +#51273 = EDGE_CURVE('',#51266,#51099,#51274,.T.); +#51274 = CIRCLE('',#51275,0.275); +#51275 = AXIS2_PLACEMENT_3D('',#51276,#51277,#51278); +#51276 = CARTESIAN_POINT('',(9.,-3.63,0.8)); +#51277 = DIRECTION('',(0.,0.,-1.)); +#51278 = DIRECTION('',(-1.,-0.,-0.)); +#51279 = ORIENTED_EDGE('',*,*,#51098,.T.); +#51280 = CYLINDRICAL_SURFACE('',#51281,0.275); +#51281 = AXIS2_PLACEMENT_3D('',#51282,#51283,#51284); +#51282 = CARTESIAN_POINT('',(9.,-3.63,0.8)); +#51283 = DIRECTION('',(0.,0.,1.)); +#51284 = DIRECTION('',(-1.,0.,0.)); +#51285 = ADVANCED_FACE('',(#51286),#51304,.T.); +#51286 = FACE_BOUND('',#51287,.F.); +#51287 = EDGE_LOOP('',(#51288,#51289,#51297,#51303)); +#51288 = ORIENTED_EDGE('',*,*,#51073,.T.); +#51289 = ORIENTED_EDGE('',*,*,#51290,.T.); +#51290 = EDGE_CURVE('',#51066,#51291,#51293,.T.); +#51291 = VERTEX_POINT('',#51292); +#51292 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#51293 = LINE('',#51294,#51295); +#51294 = CARTESIAN_POINT('',(8.55,-3.18,0.8)); +#51295 = VECTOR('',#51296,1.); +#51296 = DIRECTION('',(-0.,-1.,-0.)); +#51297 = ORIENTED_EDGE('',*,*,#51298,.F.); +#51298 = EDGE_CURVE('',#51172,#51291,#51299,.T.); +#51299 = LINE('',#51300,#51301); +#51300 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#51301 = VECTOR('',#51302,1.); +#51302 = DIRECTION('',(0.,0.,1.)); +#51303 = ORIENTED_EDGE('',*,*,#51179,.F.); +#51304 = PLANE('',#51305); +#51305 = AXIS2_PLACEMENT_3D('',#51306,#51307,#51308); +#51306 = CARTESIAN_POINT('',(8.55,-3.18,0.4)); +#51307 = DIRECTION('',(-1.,-0.,-0.)); +#51308 = DIRECTION('',(0.,1.,0.)); +#51309 = ADVANCED_FACE('',(#51310),#51331,.T.); +#51310 = FACE_BOUND('',#51311,.F.); +#51311 = EDGE_LOOP('',(#51312,#51313,#51314,#51315,#51316,#51324,#51330) + ); +#51312 = ORIENTED_EDGE('',*,*,#51065,.F.); +#51313 = ORIENTED_EDGE('',*,*,#51123,.T.); +#51314 = ORIENTED_EDGE('',*,*,#51106,.F.); +#51315 = ORIENTED_EDGE('',*,*,#51273,.F.); +#51316 = ORIENTED_EDGE('',*,*,#51317,.T.); +#51317 = EDGE_CURVE('',#51266,#51318,#51320,.T.); +#51318 = VERTEX_POINT('',#51319); +#51319 = CARTESIAN_POINT('',(9.,-4.08,0.8)); +#51320 = LINE('',#51321,#51322); +#51321 = CARTESIAN_POINT('',(9.,-3.18,0.8)); +#51322 = VECTOR('',#51323,1.); +#51323 = DIRECTION('',(-0.,-1.,-0.)); +#51324 = ORIENTED_EDGE('',*,*,#51325,.F.); +#51325 = EDGE_CURVE('',#51291,#51318,#51326,.T.); +#51326 = LINE('',#51327,#51328); +#51327 = CARTESIAN_POINT('',(8.55,-4.08,0.8)); +#51328 = VECTOR('',#51329,1.); +#51329 = DIRECTION('',(1.,0.,0.)); +#51330 = ORIENTED_EDGE('',*,*,#51290,.F.); +#51331 = PLANE('',#51332); +#51332 = AXIS2_PLACEMENT_3D('',#51333,#51334,#51335); +#51333 = CARTESIAN_POINT('',(8.775,-3.63,0.8)); +#51334 = DIRECTION('',(0.,0.,1.)); +#51335 = DIRECTION('',(1.,0.,-0.)); +#51336 = ADVANCED_FACE('',(#51337),#51343,.T.); +#51337 = FACE_BOUND('',#51338,.F.); +#51338 = EDGE_LOOP('',(#51339,#51340,#51341,#51342)); +#51339 = ORIENTED_EDGE('',*,*,#51147,.T.); +#51340 = ORIENTED_EDGE('',*,*,#51195,.T.); +#51341 = ORIENTED_EDGE('',*,*,#51171,.F.); +#51342 = ORIENTED_EDGE('',*,*,#51210,.F.); +#51343 = PLANE('',#51344); +#51344 = AXIS2_PLACEMENT_3D('',#51345,#51346,#51347); +#51345 = CARTESIAN_POINT('',(8.55,-4.08,0.)); +#51346 = DIRECTION('',(-0.,-1.,-0.)); +#51347 = DIRECTION('',(0.,0.,-1.)); +#51348 = ADVANCED_FACE('',(#51349),#51360,.T.); +#51349 = FACE_BOUND('',#51350,.F.); +#51350 = EDGE_LOOP('',(#51351,#51352,#51353,#51359)); +#51351 = ORIENTED_EDGE('',*,*,#51298,.T.); +#51352 = ORIENTED_EDGE('',*,*,#51325,.T.); +#51353 = ORIENTED_EDGE('',*,*,#51354,.F.); +#51354 = EDGE_CURVE('',#51217,#51318,#51355,.T.); +#51355 = LINE('',#51356,#51357); +#51356 = CARTESIAN_POINT('',(9.,-4.08,0.4)); +#51357 = VECTOR('',#51358,1.); +#51358 = DIRECTION('',(0.,0.,1.)); +#51359 = ORIENTED_EDGE('',*,*,#51216,.F.); +#51360 = PLANE('',#51361); +#51361 = AXIS2_PLACEMENT_3D('',#51362,#51363,#51364); +#51362 = CARTESIAN_POINT('',(8.55,-4.08,0.4)); +#51363 = DIRECTION('',(-0.,-1.,-0.)); +#51364 = DIRECTION('',(-1.,0.,0.)); +#51365 = ADVANCED_FACE('',(#51366),#51372,.F.); +#51366 = FACE_BOUND('',#51367,.T.); +#51367 = EDGE_LOOP('',(#51368,#51369,#51370,#51371)); +#51368 = ORIENTED_EDGE('',*,*,#51248,.F.); +#51369 = ORIENTED_EDGE('',*,*,#51265,.T.); +#51370 = ORIENTED_EDGE('',*,*,#51317,.T.); +#51371 = ORIENTED_EDGE('',*,*,#51354,.F.); +#51372 = PLANE('',#51373); +#51373 = AXIS2_PLACEMENT_3D('',#51374,#51375,#51376); +#51374 = CARTESIAN_POINT('',(9.,-3.18,0.4)); +#51375 = DIRECTION('',(-1.,-0.,-0.)); +#51376 = DIRECTION('',(0.,1.,0.)); +#51377 = MANIFOLD_SOLID_BREP('',#51378); +#51378 = CLOSED_SHELL('',(#51379,#51419,#51450,#51481,#51531,#51562, + #51595,#51612,#51636,#51667,#51684,#51713,#51737,#51763,#51787, + #51814,#51826,#51843)); +#51379 = ADVANCED_FACE('',(#51380),#51414,.T.); +#51380 = FACE_BOUND('',#51381,.F.); +#51381 = EDGE_LOOP('',(#51382,#51392,#51400,#51408)); +#51382 = ORIENTED_EDGE('',*,*,#51383,.T.); +#51383 = EDGE_CURVE('',#51384,#51386,#51388,.T.); +#51384 = VERTEX_POINT('',#51385); +#51385 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51386 = VERTEX_POINT('',#51387); +#51387 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51388 = LINE('',#51389,#51390); +#51389 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51390 = VECTOR('',#51391,1.); +#51391 = DIRECTION('',(0.,0.,1.)); +#51392 = ORIENTED_EDGE('',*,*,#51393,.T.); +#51393 = EDGE_CURVE('',#51386,#51394,#51396,.T.); +#51394 = VERTEX_POINT('',#51395); +#51395 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51396 = LINE('',#51397,#51398); +#51397 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51398 = VECTOR('',#51399,1.); +#51399 = DIRECTION('',(-1.,-0.,-0.)); +#51400 = ORIENTED_EDGE('',*,*,#51401,.F.); +#51401 = EDGE_CURVE('',#51402,#51394,#51404,.T.); +#51402 = VERTEX_POINT('',#51403); +#51403 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51404 = LINE('',#51405,#51406); +#51405 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51406 = VECTOR('',#51407,1.); +#51407 = DIRECTION('',(0.,0.,1.)); +#51408 = ORIENTED_EDGE('',*,*,#51409,.F.); +#51409 = EDGE_CURVE('',#51384,#51402,#51410,.T.); +#51410 = LINE('',#51411,#51412); +#51411 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51412 = VECTOR('',#51413,1.); +#51413 = DIRECTION('',(-1.,-0.,-0.)); +#51414 = PLANE('',#51415); +#51415 = AXIS2_PLACEMENT_3D('',#51416,#51417,#51418); +#51416 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51417 = DIRECTION('',(0.,1.,0.)); +#51418 = DIRECTION('',(1.,0.,0.)); +#51419 = ADVANCED_FACE('',(#51420),#51445,.F.); +#51420 = FACE_BOUND('',#51421,.T.); +#51421 = EDGE_LOOP('',(#51422,#51430,#51431,#51439)); +#51422 = ORIENTED_EDGE('',*,*,#51423,.F.); +#51423 = EDGE_CURVE('',#51384,#51424,#51426,.T.); +#51424 = VERTEX_POINT('',#51425); +#51425 = CARTESIAN_POINT('',(9.,-4.625,0.)); +#51426 = LINE('',#51427,#51428); +#51427 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51428 = VECTOR('',#51429,1.); +#51429 = DIRECTION('',(-0.,-1.,-0.)); +#51430 = ORIENTED_EDGE('',*,*,#51383,.T.); +#51431 = ORIENTED_EDGE('',*,*,#51432,.T.); +#51432 = EDGE_CURVE('',#51386,#51433,#51435,.T.); +#51433 = VERTEX_POINT('',#51434); +#51434 = CARTESIAN_POINT('',(9.,-4.625,0.4)); +#51435 = LINE('',#51436,#51437); +#51436 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51437 = VECTOR('',#51438,1.); +#51438 = DIRECTION('',(-0.,-1.,-0.)); +#51439 = ORIENTED_EDGE('',*,*,#51440,.F.); +#51440 = EDGE_CURVE('',#51424,#51433,#51441,.T.); +#51441 = LINE('',#51442,#51443); +#51442 = CARTESIAN_POINT('',(9.,-4.625,0.8)); +#51443 = VECTOR('',#51444,1.); +#51444 = DIRECTION('',(0.,0.,1.)); +#51445 = PLANE('',#51446); +#51446 = AXIS2_PLACEMENT_3D('',#51447,#51448,#51449); +#51447 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51448 = DIRECTION('',(-1.,-0.,-0.)); +#51449 = DIRECTION('',(0.,1.,0.)); +#51450 = ADVANCED_FACE('',(#51451),#51476,.F.); +#51451 = FACE_BOUND('',#51452,.T.); +#51452 = EDGE_LOOP('',(#51453,#51461,#51469,#51475)); +#51453 = ORIENTED_EDGE('',*,*,#51454,.T.); +#51454 = EDGE_CURVE('',#51402,#51455,#51457,.T.); +#51455 = VERTEX_POINT('',#51456); +#51456 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#51457 = LINE('',#51458,#51459); +#51458 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51459 = VECTOR('',#51460,1.); +#51460 = DIRECTION('',(-1.,-0.,-0.)); +#51461 = ORIENTED_EDGE('',*,*,#51462,.T.); +#51462 = EDGE_CURVE('',#51455,#51463,#51465,.T.); +#51463 = VERTEX_POINT('',#51464); +#51464 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#51465 = LINE('',#51466,#51467); +#51466 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#51467 = VECTOR('',#51468,1.); +#51468 = DIRECTION('',(0.,0.,1.)); +#51469 = ORIENTED_EDGE('',*,*,#51470,.F.); +#51470 = EDGE_CURVE('',#51394,#51463,#51471,.T.); +#51471 = LINE('',#51472,#51473); +#51472 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51473 = VECTOR('',#51474,1.); +#51474 = DIRECTION('',(-1.,-0.,-0.)); +#51475 = ORIENTED_EDGE('',*,*,#51401,.F.); +#51476 = PLANE('',#51477); +#51477 = AXIS2_PLACEMENT_3D('',#51478,#51479,#51480); +#51478 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51479 = DIRECTION('',(-0.,-1.,-0.)); +#51480 = DIRECTION('',(0.,0.,-1.)); +#51481 = ADVANCED_FACE('',(#51482),#51526,.F.); +#51482 = FACE_BOUND('',#51483,.T.); +#51483 = EDGE_LOOP('',(#51484,#51485,#51486,#51495,#51504,#51512,#51520) + ); +#51484 = ORIENTED_EDGE('',*,*,#51409,.F.); +#51485 = ORIENTED_EDGE('',*,*,#51423,.T.); +#51486 = ORIENTED_EDGE('',*,*,#51487,.F.); +#51487 = EDGE_CURVE('',#51488,#51424,#51490,.T.); +#51488 = VERTEX_POINT('',#51489); +#51489 = CARTESIAN_POINT('',(8.725,-4.9,0.)); +#51490 = CIRCLE('',#51491,0.275); +#51491 = AXIS2_PLACEMENT_3D('',#51492,#51493,#51494); +#51492 = CARTESIAN_POINT('',(9.,-4.9,0.)); +#51493 = DIRECTION('',(0.,0.,-1.)); +#51494 = DIRECTION('',(-1.,-0.,-0.)); +#51495 = ORIENTED_EDGE('',*,*,#51496,.F.); +#51496 = EDGE_CURVE('',#51497,#51488,#51499,.T.); +#51497 = VERTEX_POINT('',#51498); +#51498 = CARTESIAN_POINT('',(9.,-5.175,0.)); +#51499 = CIRCLE('',#51500,0.275); +#51500 = AXIS2_PLACEMENT_3D('',#51501,#51502,#51503); +#51501 = CARTESIAN_POINT('',(9.,-4.9,0.)); +#51502 = DIRECTION('',(0.,0.,-1.)); +#51503 = DIRECTION('',(-1.,-0.,-0.)); +#51504 = ORIENTED_EDGE('',*,*,#51505,.T.); +#51505 = EDGE_CURVE('',#51497,#51506,#51508,.T.); +#51506 = VERTEX_POINT('',#51507); +#51507 = CARTESIAN_POINT('',(9.,-5.35,0.)); +#51508 = LINE('',#51509,#51510); +#51509 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51510 = VECTOR('',#51511,1.); +#51511 = DIRECTION('',(-0.,-1.,-0.)); +#51512 = ORIENTED_EDGE('',*,*,#51513,.F.); +#51513 = EDGE_CURVE('',#51514,#51506,#51516,.T.); +#51514 = VERTEX_POINT('',#51515); +#51515 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51516 = LINE('',#51517,#51518); +#51517 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51518 = VECTOR('',#51519,1.); +#51519 = DIRECTION('',(1.,0.,0.)); +#51520 = ORIENTED_EDGE('',*,*,#51521,.F.); +#51521 = EDGE_CURVE('',#51402,#51514,#51522,.T.); +#51522 = LINE('',#51523,#51524); +#51523 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51524 = VECTOR('',#51525,1.); +#51525 = DIRECTION('',(-0.,-1.,-0.)); +#51526 = PLANE('',#51527); +#51527 = AXIS2_PLACEMENT_3D('',#51528,#51529,#51530); +#51528 = CARTESIAN_POINT('',(8.775,-4.9,0.)); +#51529 = DIRECTION('',(0.,0.,1.)); +#51530 = DIRECTION('',(1.,0.,-0.)); +#51531 = ADVANCED_FACE('',(#51532),#51557,.T.); +#51532 = FACE_BOUND('',#51533,.F.); +#51533 = EDGE_LOOP('',(#51534,#51542,#51550,#51556)); +#51534 = ORIENTED_EDGE('',*,*,#51535,.T.); +#51535 = EDGE_CURVE('',#51386,#51536,#51538,.T.); +#51536 = VERTEX_POINT('',#51537); +#51537 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#51538 = LINE('',#51539,#51540); +#51539 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51540 = VECTOR('',#51541,1.); +#51541 = DIRECTION('',(0.,0.,1.)); +#51542 = ORIENTED_EDGE('',*,*,#51543,.T.); +#51543 = EDGE_CURVE('',#51536,#51544,#51546,.T.); +#51544 = VERTEX_POINT('',#51545); +#51545 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#51546 = LINE('',#51547,#51548); +#51547 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#51548 = VECTOR('',#51549,1.); +#51549 = DIRECTION('',(-1.,-0.,-0.)); +#51550 = ORIENTED_EDGE('',*,*,#51551,.F.); +#51551 = EDGE_CURVE('',#51394,#51544,#51552,.T.); +#51552 = LINE('',#51553,#51554); +#51553 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51554 = VECTOR('',#51555,1.); +#51555 = DIRECTION('',(0.,0.,1.)); +#51556 = ORIENTED_EDGE('',*,*,#51393,.F.); +#51557 = PLANE('',#51558); +#51558 = AXIS2_PLACEMENT_3D('',#51559,#51560,#51561); +#51559 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51560 = DIRECTION('',(0.,1.,0.)); +#51561 = DIRECTION('',(1.,0.,0.)); +#51562 = ADVANCED_FACE('',(#51563),#51590,.F.); +#51563 = FACE_BOUND('',#51564,.F.); +#51564 = EDGE_LOOP('',(#51565,#51573,#51574,#51575,#51583)); +#51565 = ORIENTED_EDGE('',*,*,#51566,.F.); +#51566 = EDGE_CURVE('',#51433,#51567,#51569,.T.); +#51567 = VERTEX_POINT('',#51568); +#51568 = CARTESIAN_POINT('',(9.,-4.625,0.8)); +#51569 = LINE('',#51570,#51571); +#51570 = CARTESIAN_POINT('',(9.,-4.625,0.8)); +#51571 = VECTOR('',#51572,1.); +#51572 = DIRECTION('',(0.,0.,1.)); +#51573 = ORIENTED_EDGE('',*,*,#51440,.F.); +#51574 = ORIENTED_EDGE('',*,*,#51487,.F.); +#51575 = ORIENTED_EDGE('',*,*,#51576,.F.); +#51576 = EDGE_CURVE('',#51577,#51488,#51579,.T.); +#51577 = VERTEX_POINT('',#51578); +#51578 = CARTESIAN_POINT('',(8.725,-4.9,0.8)); +#51579 = LINE('',#51580,#51581); +#51580 = CARTESIAN_POINT('',(8.725,-4.9,0.8)); +#51581 = VECTOR('',#51582,1.); +#51582 = DIRECTION('',(0.,0.,-1.)); +#51583 = ORIENTED_EDGE('',*,*,#51584,.T.); +#51584 = EDGE_CURVE('',#51577,#51567,#51585,.T.); +#51585 = CIRCLE('',#51586,0.275); +#51586 = AXIS2_PLACEMENT_3D('',#51587,#51588,#51589); +#51587 = CARTESIAN_POINT('',(9.,-4.9,0.8)); +#51588 = DIRECTION('',(0.,0.,-1.)); +#51589 = DIRECTION('',(-1.,-0.,-0.)); +#51590 = CYLINDRICAL_SURFACE('',#51591,0.275); +#51591 = AXIS2_PLACEMENT_3D('',#51592,#51593,#51594); +#51592 = CARTESIAN_POINT('',(9.,-4.9,0.8)); +#51593 = DIRECTION('',(0.,0.,1.)); +#51594 = DIRECTION('',(-1.,0.,0.)); +#51595 = ADVANCED_FACE('',(#51596),#51607,.F.); +#51596 = FACE_BOUND('',#51597,.T.); +#51597 = EDGE_LOOP('',(#51598,#51599,#51600,#51606)); +#51598 = ORIENTED_EDGE('',*,*,#51432,.F.); +#51599 = ORIENTED_EDGE('',*,*,#51535,.T.); +#51600 = ORIENTED_EDGE('',*,*,#51601,.T.); +#51601 = EDGE_CURVE('',#51536,#51567,#51602,.T.); +#51602 = LINE('',#51603,#51604); +#51603 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#51604 = VECTOR('',#51605,1.); +#51605 = DIRECTION('',(-0.,-1.,-0.)); +#51606 = ORIENTED_EDGE('',*,*,#51566,.F.); +#51607 = PLANE('',#51608); +#51608 = AXIS2_PLACEMENT_3D('',#51609,#51610,#51611); +#51609 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51610 = DIRECTION('',(-1.,-0.,-0.)); +#51611 = DIRECTION('',(0.,1.,0.)); +#51612 = ADVANCED_FACE('',(#51613),#51631,.T.); +#51613 = FACE_BOUND('',#51614,.F.); +#51614 = EDGE_LOOP('',(#51615,#51616,#51624,#51630)); +#51615 = ORIENTED_EDGE('',*,*,#51454,.T.); +#51616 = ORIENTED_EDGE('',*,*,#51617,.T.); +#51617 = EDGE_CURVE('',#51455,#51618,#51620,.T.); +#51618 = VERTEX_POINT('',#51619); +#51619 = CARTESIAN_POINT('',(8.15,-5.35,0.)); +#51620 = LINE('',#51621,#51622); +#51621 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#51622 = VECTOR('',#51623,1.); +#51623 = DIRECTION('',(-0.,-1.,-0.)); +#51624 = ORIENTED_EDGE('',*,*,#51625,.F.); +#51625 = EDGE_CURVE('',#51514,#51618,#51626,.T.); +#51626 = LINE('',#51627,#51628); +#51627 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51628 = VECTOR('',#51629,1.); +#51629 = DIRECTION('',(-1.,-0.,-0.)); +#51630 = ORIENTED_EDGE('',*,*,#51521,.F.); +#51631 = PLANE('',#51632); +#51632 = AXIS2_PLACEMENT_3D('',#51633,#51634,#51635); +#51633 = CARTESIAN_POINT('',(8.55,-4.45,0.)); +#51634 = DIRECTION('',(-0.,-0.,-1.)); +#51635 = DIRECTION('',(0.,1.,-0.)); +#51636 = ADVANCED_FACE('',(#51637),#51662,.F.); +#51637 = FACE_BOUND('',#51638,.T.); +#51638 = EDGE_LOOP('',(#51639,#51640,#51648,#51656)); +#51639 = ORIENTED_EDGE('',*,*,#51470,.T.); +#51640 = ORIENTED_EDGE('',*,*,#51641,.T.); +#51641 = EDGE_CURVE('',#51463,#51642,#51644,.T.); +#51642 = VERTEX_POINT('',#51643); +#51643 = CARTESIAN_POINT('',(8.15,-5.35,0.4)); +#51644 = LINE('',#51645,#51646); +#51645 = CARTESIAN_POINT('',(8.15,-4.45,0.4)); +#51646 = VECTOR('',#51647,1.); +#51647 = DIRECTION('',(-0.,-1.,-0.)); +#51648 = ORIENTED_EDGE('',*,*,#51649,.F.); +#51649 = EDGE_CURVE('',#51650,#51642,#51652,.T.); +#51650 = VERTEX_POINT('',#51651); +#51651 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#51652 = LINE('',#51653,#51654); +#51653 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#51654 = VECTOR('',#51655,1.); +#51655 = DIRECTION('',(-1.,-0.,-0.)); +#51656 = ORIENTED_EDGE('',*,*,#51657,.F.); +#51657 = EDGE_CURVE('',#51394,#51650,#51658,.T.); +#51658 = LINE('',#51659,#51660); +#51659 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51660 = VECTOR('',#51661,1.); +#51661 = DIRECTION('',(-0.,-1.,-0.)); +#51662 = PLANE('',#51663); +#51663 = AXIS2_PLACEMENT_3D('',#51664,#51665,#51666); +#51664 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51665 = DIRECTION('',(-0.,-0.,-1.)); +#51666 = DIRECTION('',(0.,1.,-0.)); +#51667 = ADVANCED_FACE('',(#51668),#51679,.T.); +#51668 = FACE_BOUND('',#51669,.F.); +#51669 = EDGE_LOOP('',(#51670,#51671,#51672,#51678)); +#51670 = ORIENTED_EDGE('',*,*,#51462,.T.); +#51671 = ORIENTED_EDGE('',*,*,#51641,.T.); +#51672 = ORIENTED_EDGE('',*,*,#51673,.F.); +#51673 = EDGE_CURVE('',#51618,#51642,#51674,.T.); +#51674 = LINE('',#51675,#51676); +#51675 = CARTESIAN_POINT('',(8.15,-5.35,0.)); +#51676 = VECTOR('',#51677,1.); +#51677 = DIRECTION('',(0.,0.,1.)); +#51678 = ORIENTED_EDGE('',*,*,#51617,.F.); +#51679 = PLANE('',#51680); +#51680 = AXIS2_PLACEMENT_3D('',#51681,#51682,#51683); +#51681 = CARTESIAN_POINT('',(8.15,-4.45,0.)); +#51682 = DIRECTION('',(-1.,-0.,-0.)); +#51683 = DIRECTION('',(0.,1.,0.)); +#51684 = ADVANCED_FACE('',(#51685),#51708,.T.); +#51685 = FACE_BOUND('',#51686,.F.); +#51686 = EDGE_LOOP('',(#51687,#51693,#51701,#51707)); +#51687 = ORIENTED_EDGE('',*,*,#51688,.T.); +#51688 = EDGE_CURVE('',#51514,#51650,#51689,.T.); +#51689 = LINE('',#51690,#51691); +#51690 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51691 = VECTOR('',#51692,1.); +#51692 = DIRECTION('',(0.,0.,1.)); +#51693 = ORIENTED_EDGE('',*,*,#51694,.T.); +#51694 = EDGE_CURVE('',#51650,#51695,#51697,.T.); +#51695 = VERTEX_POINT('',#51696); +#51696 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#51697 = LINE('',#51698,#51699); +#51698 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#51699 = VECTOR('',#51700,1.); +#51700 = DIRECTION('',(1.,0.,0.)); +#51701 = ORIENTED_EDGE('',*,*,#51702,.F.); +#51702 = EDGE_CURVE('',#51506,#51695,#51703,.T.); +#51703 = LINE('',#51704,#51705); +#51704 = CARTESIAN_POINT('',(9.,-5.35,0.)); +#51705 = VECTOR('',#51706,1.); +#51706 = DIRECTION('',(0.,0.,1.)); +#51707 = ORIENTED_EDGE('',*,*,#51513,.F.); +#51708 = PLANE('',#51709); +#51709 = AXIS2_PLACEMENT_3D('',#51710,#51711,#51712); +#51710 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51711 = DIRECTION('',(-0.,-1.,-0.)); +#51712 = DIRECTION('',(-1.,0.,0.)); +#51713 = ADVANCED_FACE('',(#51714),#51732,.F.); +#51714 = FACE_BOUND('',#51715,.T.); +#51715 = EDGE_LOOP('',(#51716,#51717,#51725,#51731)); +#51716 = ORIENTED_EDGE('',*,*,#51505,.F.); +#51717 = ORIENTED_EDGE('',*,*,#51718,.T.); +#51718 = EDGE_CURVE('',#51497,#51719,#51721,.T.); +#51719 = VERTEX_POINT('',#51720); +#51720 = CARTESIAN_POINT('',(9.,-5.175,0.4)); +#51721 = LINE('',#51722,#51723); +#51722 = CARTESIAN_POINT('',(9.,-5.175,0.8)); +#51723 = VECTOR('',#51724,1.); +#51724 = DIRECTION('',(0.,0.,1.)); +#51725 = ORIENTED_EDGE('',*,*,#51726,.T.); +#51726 = EDGE_CURVE('',#51719,#51695,#51727,.T.); +#51727 = LINE('',#51728,#51729); +#51728 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51729 = VECTOR('',#51730,1.); +#51730 = DIRECTION('',(-0.,-1.,-0.)); +#51731 = ORIENTED_EDGE('',*,*,#51702,.F.); +#51732 = PLANE('',#51733); +#51733 = AXIS2_PLACEMENT_3D('',#51734,#51735,#51736); +#51734 = CARTESIAN_POINT('',(9.,-4.45,0.)); +#51735 = DIRECTION('',(-1.,-0.,-0.)); +#51736 = DIRECTION('',(0.,1.,0.)); +#51737 = ADVANCED_FACE('',(#51738),#51758,.F.); +#51738 = FACE_BOUND('',#51739,.F.); +#51739 = EDGE_LOOP('',(#51740,#51741,#51742,#51750,#51757)); +#51740 = ORIENTED_EDGE('',*,*,#51496,.F.); +#51741 = ORIENTED_EDGE('',*,*,#51718,.T.); +#51742 = ORIENTED_EDGE('',*,*,#51743,.T.); +#51743 = EDGE_CURVE('',#51719,#51744,#51746,.T.); +#51744 = VERTEX_POINT('',#51745); +#51745 = CARTESIAN_POINT('',(9.,-5.175,0.8)); +#51746 = LINE('',#51747,#51748); +#51747 = CARTESIAN_POINT('',(9.,-5.175,0.8)); +#51748 = VECTOR('',#51749,1.); +#51749 = DIRECTION('',(0.,0.,1.)); +#51750 = ORIENTED_EDGE('',*,*,#51751,.T.); +#51751 = EDGE_CURVE('',#51744,#51577,#51752,.T.); +#51752 = CIRCLE('',#51753,0.275); +#51753 = AXIS2_PLACEMENT_3D('',#51754,#51755,#51756); +#51754 = CARTESIAN_POINT('',(9.,-4.9,0.8)); +#51755 = DIRECTION('',(0.,0.,-1.)); +#51756 = DIRECTION('',(-1.,-0.,-0.)); +#51757 = ORIENTED_EDGE('',*,*,#51576,.T.); +#51758 = CYLINDRICAL_SURFACE('',#51759,0.275); +#51759 = AXIS2_PLACEMENT_3D('',#51760,#51761,#51762); +#51760 = CARTESIAN_POINT('',(9.,-4.9,0.8)); +#51761 = DIRECTION('',(0.,0.,1.)); +#51762 = DIRECTION('',(-1.,0.,0.)); +#51763 = ADVANCED_FACE('',(#51764),#51782,.T.); +#51764 = FACE_BOUND('',#51765,.F.); +#51765 = EDGE_LOOP('',(#51766,#51767,#51775,#51781)); +#51766 = ORIENTED_EDGE('',*,*,#51551,.T.); +#51767 = ORIENTED_EDGE('',*,*,#51768,.T.); +#51768 = EDGE_CURVE('',#51544,#51769,#51771,.T.); +#51769 = VERTEX_POINT('',#51770); +#51770 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#51771 = LINE('',#51772,#51773); +#51772 = CARTESIAN_POINT('',(8.55,-4.45,0.8)); +#51773 = VECTOR('',#51774,1.); +#51774 = DIRECTION('',(-0.,-1.,-0.)); +#51775 = ORIENTED_EDGE('',*,*,#51776,.F.); +#51776 = EDGE_CURVE('',#51650,#51769,#51777,.T.); +#51777 = LINE('',#51778,#51779); +#51778 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#51779 = VECTOR('',#51780,1.); +#51780 = DIRECTION('',(0.,0.,1.)); +#51781 = ORIENTED_EDGE('',*,*,#51657,.F.); +#51782 = PLANE('',#51783); +#51783 = AXIS2_PLACEMENT_3D('',#51784,#51785,#51786); +#51784 = CARTESIAN_POINT('',(8.55,-4.45,0.4)); +#51785 = DIRECTION('',(-1.,-0.,-0.)); +#51786 = DIRECTION('',(0.,1.,0.)); +#51787 = ADVANCED_FACE('',(#51788),#51809,.T.); +#51788 = FACE_BOUND('',#51789,.F.); +#51789 = EDGE_LOOP('',(#51790,#51791,#51792,#51793,#51794,#51802,#51808) + ); +#51790 = ORIENTED_EDGE('',*,*,#51543,.F.); +#51791 = ORIENTED_EDGE('',*,*,#51601,.T.); +#51792 = ORIENTED_EDGE('',*,*,#51584,.F.); +#51793 = ORIENTED_EDGE('',*,*,#51751,.F.); +#51794 = ORIENTED_EDGE('',*,*,#51795,.T.); +#51795 = EDGE_CURVE('',#51744,#51796,#51798,.T.); +#51796 = VERTEX_POINT('',#51797); +#51797 = CARTESIAN_POINT('',(9.,-5.35,0.8)); +#51798 = LINE('',#51799,#51800); +#51799 = CARTESIAN_POINT('',(9.,-4.45,0.8)); +#51800 = VECTOR('',#51801,1.); +#51801 = DIRECTION('',(-0.,-1.,-0.)); +#51802 = ORIENTED_EDGE('',*,*,#51803,.F.); +#51803 = EDGE_CURVE('',#51769,#51796,#51804,.T.); +#51804 = LINE('',#51805,#51806); +#51805 = CARTESIAN_POINT('',(8.55,-5.35,0.8)); +#51806 = VECTOR('',#51807,1.); +#51807 = DIRECTION('',(1.,0.,0.)); +#51808 = ORIENTED_EDGE('',*,*,#51768,.F.); +#51809 = PLANE('',#51810); +#51810 = AXIS2_PLACEMENT_3D('',#51811,#51812,#51813); +#51811 = CARTESIAN_POINT('',(8.775,-4.9,0.8)); +#51812 = DIRECTION('',(0.,0.,1.)); +#51813 = DIRECTION('',(1.,0.,-0.)); +#51814 = ADVANCED_FACE('',(#51815),#51821,.T.); +#51815 = FACE_BOUND('',#51816,.F.); +#51816 = EDGE_LOOP('',(#51817,#51818,#51819,#51820)); +#51817 = ORIENTED_EDGE('',*,*,#51625,.T.); +#51818 = ORIENTED_EDGE('',*,*,#51673,.T.); +#51819 = ORIENTED_EDGE('',*,*,#51649,.F.); +#51820 = ORIENTED_EDGE('',*,*,#51688,.F.); +#51821 = PLANE('',#51822); +#51822 = AXIS2_PLACEMENT_3D('',#51823,#51824,#51825); +#51823 = CARTESIAN_POINT('',(8.55,-5.35,0.)); +#51824 = DIRECTION('',(-0.,-1.,-0.)); +#51825 = DIRECTION('',(0.,0.,-1.)); +#51826 = ADVANCED_FACE('',(#51827),#51838,.T.); +#51827 = FACE_BOUND('',#51828,.F.); +#51828 = EDGE_LOOP('',(#51829,#51830,#51831,#51837)); +#51829 = ORIENTED_EDGE('',*,*,#51776,.T.); +#51830 = ORIENTED_EDGE('',*,*,#51803,.T.); +#51831 = ORIENTED_EDGE('',*,*,#51832,.F.); +#51832 = EDGE_CURVE('',#51695,#51796,#51833,.T.); +#51833 = LINE('',#51834,#51835); +#51834 = CARTESIAN_POINT('',(9.,-5.35,0.4)); +#51835 = VECTOR('',#51836,1.); +#51836 = DIRECTION('',(0.,0.,1.)); +#51837 = ORIENTED_EDGE('',*,*,#51694,.F.); +#51838 = PLANE('',#51839); +#51839 = AXIS2_PLACEMENT_3D('',#51840,#51841,#51842); +#51840 = CARTESIAN_POINT('',(8.55,-5.35,0.4)); +#51841 = DIRECTION('',(-0.,-1.,-0.)); +#51842 = DIRECTION('',(-1.,0.,0.)); +#51843 = ADVANCED_FACE('',(#51844),#51850,.F.); +#51844 = FACE_BOUND('',#51845,.T.); +#51845 = EDGE_LOOP('',(#51846,#51847,#51848,#51849)); +#51846 = ORIENTED_EDGE('',*,*,#51726,.F.); +#51847 = ORIENTED_EDGE('',*,*,#51743,.T.); +#51848 = ORIENTED_EDGE('',*,*,#51795,.T.); +#51849 = ORIENTED_EDGE('',*,*,#51832,.F.); +#51850 = PLANE('',#51851); +#51851 = AXIS2_PLACEMENT_3D('',#51852,#51853,#51854); +#51852 = CARTESIAN_POINT('',(9.,-4.45,0.4)); +#51853 = DIRECTION('',(-1.,-0.,-0.)); +#51854 = DIRECTION('',(0.,1.,0.)); +#51855 = MANIFOLD_SOLID_BREP('',#51856); +#51856 = CLOSED_SHELL('',(#51857,#51897,#51928,#51959,#52009,#52040, + #52073,#52090,#52114,#52145,#52162,#52191,#52215,#52241,#52265, + #52292,#52304,#52321)); +#51857 = ADVANCED_FACE('',(#51858),#51892,.T.); +#51858 = FACE_BOUND('',#51859,.F.); +#51859 = EDGE_LOOP('',(#51860,#51870,#51878,#51886)); +#51860 = ORIENTED_EDGE('',*,*,#51861,.T.); +#51861 = EDGE_CURVE('',#51862,#51864,#51866,.T.); +#51862 = VERTEX_POINT('',#51863); +#51863 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51864 = VERTEX_POINT('',#51865); +#51865 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#51866 = LINE('',#51867,#51868); +#51867 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51868 = VECTOR('',#51869,1.); +#51869 = DIRECTION('',(0.,0.,1.)); +#51870 = ORIENTED_EDGE('',*,*,#51871,.T.); +#51871 = EDGE_CURVE('',#51864,#51872,#51874,.T.); +#51872 = VERTEX_POINT('',#51873); +#51873 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#51874 = LINE('',#51875,#51876); +#51875 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#51876 = VECTOR('',#51877,1.); +#51877 = DIRECTION('',(-1.,-0.,-0.)); +#51878 = ORIENTED_EDGE('',*,*,#51879,.F.); +#51879 = EDGE_CURVE('',#51880,#51872,#51882,.T.); +#51880 = VERTEX_POINT('',#51881); +#51881 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#51882 = LINE('',#51883,#51884); +#51883 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#51884 = VECTOR('',#51885,1.); +#51885 = DIRECTION('',(0.,0.,1.)); +#51886 = ORIENTED_EDGE('',*,*,#51887,.F.); +#51887 = EDGE_CURVE('',#51862,#51880,#51888,.T.); +#51888 = LINE('',#51889,#51890); +#51889 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51890 = VECTOR('',#51891,1.); +#51891 = DIRECTION('',(-1.,-0.,-0.)); +#51892 = PLANE('',#51893); +#51893 = AXIS2_PLACEMENT_3D('',#51894,#51895,#51896); +#51894 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51895 = DIRECTION('',(0.,1.,0.)); +#51896 = DIRECTION('',(1.,0.,0.)); +#51897 = ADVANCED_FACE('',(#51898),#51923,.F.); +#51898 = FACE_BOUND('',#51899,.T.); +#51899 = EDGE_LOOP('',(#51900,#51908,#51909,#51917)); +#51900 = ORIENTED_EDGE('',*,*,#51901,.F.); +#51901 = EDGE_CURVE('',#51862,#51902,#51904,.T.); +#51902 = VERTEX_POINT('',#51903); +#51903 = CARTESIAN_POINT('',(9.,-5.895,0.)); +#51904 = LINE('',#51905,#51906); +#51905 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51906 = VECTOR('',#51907,1.); +#51907 = DIRECTION('',(-0.,-1.,-0.)); +#51908 = ORIENTED_EDGE('',*,*,#51861,.T.); +#51909 = ORIENTED_EDGE('',*,*,#51910,.T.); +#51910 = EDGE_CURVE('',#51864,#51911,#51913,.T.); +#51911 = VERTEX_POINT('',#51912); +#51912 = CARTESIAN_POINT('',(9.,-5.895,0.4)); +#51913 = LINE('',#51914,#51915); +#51914 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#51915 = VECTOR('',#51916,1.); +#51916 = DIRECTION('',(-0.,-1.,-0.)); +#51917 = ORIENTED_EDGE('',*,*,#51918,.F.); +#51918 = EDGE_CURVE('',#51902,#51911,#51919,.T.); +#51919 = LINE('',#51920,#51921); +#51920 = CARTESIAN_POINT('',(9.,-5.895,0.8)); +#51921 = VECTOR('',#51922,1.); +#51922 = DIRECTION('',(0.,0.,1.)); +#51923 = PLANE('',#51924); +#51924 = AXIS2_PLACEMENT_3D('',#51925,#51926,#51927); +#51925 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51926 = DIRECTION('',(-1.,-0.,-0.)); +#51927 = DIRECTION('',(0.,1.,0.)); +#51928 = ADVANCED_FACE('',(#51929),#51954,.F.); +#51929 = FACE_BOUND('',#51930,.T.); +#51930 = EDGE_LOOP('',(#51931,#51939,#51947,#51953)); +#51931 = ORIENTED_EDGE('',*,*,#51932,.T.); +#51932 = EDGE_CURVE('',#51880,#51933,#51935,.T.); +#51933 = VERTEX_POINT('',#51934); +#51934 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#51935 = LINE('',#51936,#51937); +#51936 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#51937 = VECTOR('',#51938,1.); +#51938 = DIRECTION('',(-1.,-0.,-0.)); +#51939 = ORIENTED_EDGE('',*,*,#51940,.T.); +#51940 = EDGE_CURVE('',#51933,#51941,#51943,.T.); +#51941 = VERTEX_POINT('',#51942); +#51942 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#51943 = LINE('',#51944,#51945); +#51944 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#51945 = VECTOR('',#51946,1.); +#51946 = DIRECTION('',(0.,0.,1.)); +#51947 = ORIENTED_EDGE('',*,*,#51948,.F.); +#51948 = EDGE_CURVE('',#51872,#51941,#51949,.T.); +#51949 = LINE('',#51950,#51951); +#51950 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#51951 = VECTOR('',#51952,1.); +#51952 = DIRECTION('',(-1.,-0.,-0.)); +#51953 = ORIENTED_EDGE('',*,*,#51879,.F.); +#51954 = PLANE('',#51955); +#51955 = AXIS2_PLACEMENT_3D('',#51956,#51957,#51958); +#51956 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#51957 = DIRECTION('',(-0.,-1.,-0.)); +#51958 = DIRECTION('',(0.,0.,-1.)); +#51959 = ADVANCED_FACE('',(#51960),#52004,.F.); +#51960 = FACE_BOUND('',#51961,.T.); +#51961 = EDGE_LOOP('',(#51962,#51963,#51964,#51973,#51982,#51990,#51998) + ); +#51962 = ORIENTED_EDGE('',*,*,#51887,.F.); +#51963 = ORIENTED_EDGE('',*,*,#51901,.T.); +#51964 = ORIENTED_EDGE('',*,*,#51965,.F.); +#51965 = EDGE_CURVE('',#51966,#51902,#51968,.T.); +#51966 = VERTEX_POINT('',#51967); +#51967 = CARTESIAN_POINT('',(8.725,-6.17,0.)); +#51968 = CIRCLE('',#51969,0.275); +#51969 = AXIS2_PLACEMENT_3D('',#51970,#51971,#51972); +#51970 = CARTESIAN_POINT('',(9.,-6.17,0.)); +#51971 = DIRECTION('',(0.,0.,-1.)); +#51972 = DIRECTION('',(-1.,-0.,-0.)); +#51973 = ORIENTED_EDGE('',*,*,#51974,.F.); +#51974 = EDGE_CURVE('',#51975,#51966,#51977,.T.); +#51975 = VERTEX_POINT('',#51976); +#51976 = CARTESIAN_POINT('',(9.,-6.445,0.)); +#51977 = CIRCLE('',#51978,0.275); +#51978 = AXIS2_PLACEMENT_3D('',#51979,#51980,#51981); +#51979 = CARTESIAN_POINT('',(9.,-6.17,0.)); +#51980 = DIRECTION('',(0.,0.,-1.)); +#51981 = DIRECTION('',(-1.,-0.,-0.)); +#51982 = ORIENTED_EDGE('',*,*,#51983,.T.); +#51983 = EDGE_CURVE('',#51975,#51984,#51986,.T.); +#51984 = VERTEX_POINT('',#51985); +#51985 = CARTESIAN_POINT('',(9.,-6.62,0.)); +#51986 = LINE('',#51987,#51988); +#51987 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#51988 = VECTOR('',#51989,1.); +#51989 = DIRECTION('',(-0.,-1.,-0.)); +#51990 = ORIENTED_EDGE('',*,*,#51991,.F.); +#51991 = EDGE_CURVE('',#51992,#51984,#51994,.T.); +#51992 = VERTEX_POINT('',#51993); +#51993 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#51994 = LINE('',#51995,#51996); +#51995 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#51996 = VECTOR('',#51997,1.); +#51997 = DIRECTION('',(1.,0.,0.)); +#51998 = ORIENTED_EDGE('',*,*,#51999,.F.); +#51999 = EDGE_CURVE('',#51880,#51992,#52000,.T.); +#52000 = LINE('',#52001,#52002); +#52001 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#52002 = VECTOR('',#52003,1.); +#52003 = DIRECTION('',(-0.,-1.,-0.)); +#52004 = PLANE('',#52005); +#52005 = AXIS2_PLACEMENT_3D('',#52006,#52007,#52008); +#52006 = CARTESIAN_POINT('',(8.775,-6.17,0.)); +#52007 = DIRECTION('',(0.,0.,1.)); +#52008 = DIRECTION('',(1.,0.,-0.)); +#52009 = ADVANCED_FACE('',(#52010),#52035,.T.); +#52010 = FACE_BOUND('',#52011,.F.); +#52011 = EDGE_LOOP('',(#52012,#52020,#52028,#52034)); +#52012 = ORIENTED_EDGE('',*,*,#52013,.T.); +#52013 = EDGE_CURVE('',#51864,#52014,#52016,.T.); +#52014 = VERTEX_POINT('',#52015); +#52015 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#52016 = LINE('',#52017,#52018); +#52017 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#52018 = VECTOR('',#52019,1.); +#52019 = DIRECTION('',(0.,0.,1.)); +#52020 = ORIENTED_EDGE('',*,*,#52021,.T.); +#52021 = EDGE_CURVE('',#52014,#52022,#52024,.T.); +#52022 = VERTEX_POINT('',#52023); +#52023 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#52024 = LINE('',#52025,#52026); +#52025 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#52026 = VECTOR('',#52027,1.); +#52027 = DIRECTION('',(-1.,-0.,-0.)); +#52028 = ORIENTED_EDGE('',*,*,#52029,.F.); +#52029 = EDGE_CURVE('',#51872,#52022,#52030,.T.); +#52030 = LINE('',#52031,#52032); +#52031 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#52032 = VECTOR('',#52033,1.); +#52033 = DIRECTION('',(0.,0.,1.)); +#52034 = ORIENTED_EDGE('',*,*,#51871,.F.); +#52035 = PLANE('',#52036); +#52036 = AXIS2_PLACEMENT_3D('',#52037,#52038,#52039); +#52037 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#52038 = DIRECTION('',(0.,1.,0.)); +#52039 = DIRECTION('',(1.,0.,0.)); +#52040 = ADVANCED_FACE('',(#52041),#52068,.F.); +#52041 = FACE_BOUND('',#52042,.F.); +#52042 = EDGE_LOOP('',(#52043,#52051,#52052,#52053,#52061)); +#52043 = ORIENTED_EDGE('',*,*,#52044,.F.); +#52044 = EDGE_CURVE('',#51911,#52045,#52047,.T.); +#52045 = VERTEX_POINT('',#52046); +#52046 = CARTESIAN_POINT('',(9.,-5.895,0.8)); +#52047 = LINE('',#52048,#52049); +#52048 = CARTESIAN_POINT('',(9.,-5.895,0.8)); +#52049 = VECTOR('',#52050,1.); +#52050 = DIRECTION('',(0.,0.,1.)); +#52051 = ORIENTED_EDGE('',*,*,#51918,.F.); +#52052 = ORIENTED_EDGE('',*,*,#51965,.F.); +#52053 = ORIENTED_EDGE('',*,*,#52054,.F.); +#52054 = EDGE_CURVE('',#52055,#51966,#52057,.T.); +#52055 = VERTEX_POINT('',#52056); +#52056 = CARTESIAN_POINT('',(8.725,-6.17,0.8)); +#52057 = LINE('',#52058,#52059); +#52058 = CARTESIAN_POINT('',(8.725,-6.17,0.8)); +#52059 = VECTOR('',#52060,1.); +#52060 = DIRECTION('',(0.,0.,-1.)); +#52061 = ORIENTED_EDGE('',*,*,#52062,.T.); +#52062 = EDGE_CURVE('',#52055,#52045,#52063,.T.); +#52063 = CIRCLE('',#52064,0.275); +#52064 = AXIS2_PLACEMENT_3D('',#52065,#52066,#52067); +#52065 = CARTESIAN_POINT('',(9.,-6.17,0.8)); +#52066 = DIRECTION('',(0.,0.,-1.)); +#52067 = DIRECTION('',(-1.,-0.,-0.)); +#52068 = CYLINDRICAL_SURFACE('',#52069,0.275); +#52069 = AXIS2_PLACEMENT_3D('',#52070,#52071,#52072); +#52070 = CARTESIAN_POINT('',(9.,-6.17,0.8)); +#52071 = DIRECTION('',(0.,0.,1.)); +#52072 = DIRECTION('',(-1.,0.,0.)); +#52073 = ADVANCED_FACE('',(#52074),#52085,.F.); +#52074 = FACE_BOUND('',#52075,.T.); +#52075 = EDGE_LOOP('',(#52076,#52077,#52078,#52084)); +#52076 = ORIENTED_EDGE('',*,*,#51910,.F.); +#52077 = ORIENTED_EDGE('',*,*,#52013,.T.); +#52078 = ORIENTED_EDGE('',*,*,#52079,.T.); +#52079 = EDGE_CURVE('',#52014,#52045,#52080,.T.); +#52080 = LINE('',#52081,#52082); +#52081 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#52082 = VECTOR('',#52083,1.); +#52083 = DIRECTION('',(-0.,-1.,-0.)); +#52084 = ORIENTED_EDGE('',*,*,#52044,.F.); +#52085 = PLANE('',#52086); +#52086 = AXIS2_PLACEMENT_3D('',#52087,#52088,#52089); +#52087 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#52088 = DIRECTION('',(-1.,-0.,-0.)); +#52089 = DIRECTION('',(0.,1.,0.)); +#52090 = ADVANCED_FACE('',(#52091),#52109,.T.); +#52091 = FACE_BOUND('',#52092,.F.); +#52092 = EDGE_LOOP('',(#52093,#52094,#52102,#52108)); +#52093 = ORIENTED_EDGE('',*,*,#51932,.T.); +#52094 = ORIENTED_EDGE('',*,*,#52095,.T.); +#52095 = EDGE_CURVE('',#51933,#52096,#52098,.T.); +#52096 = VERTEX_POINT('',#52097); +#52097 = CARTESIAN_POINT('',(8.15,-6.62,0.)); +#52098 = LINE('',#52099,#52100); +#52099 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#52100 = VECTOR('',#52101,1.); +#52101 = DIRECTION('',(-0.,-1.,-0.)); +#52102 = ORIENTED_EDGE('',*,*,#52103,.F.); +#52103 = EDGE_CURVE('',#51992,#52096,#52104,.T.); +#52104 = LINE('',#52105,#52106); +#52105 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#52106 = VECTOR('',#52107,1.); +#52107 = DIRECTION('',(-1.,-0.,-0.)); +#52108 = ORIENTED_EDGE('',*,*,#51999,.F.); +#52109 = PLANE('',#52110); +#52110 = AXIS2_PLACEMENT_3D('',#52111,#52112,#52113); +#52111 = CARTESIAN_POINT('',(8.55,-5.72,0.)); +#52112 = DIRECTION('',(-0.,-0.,-1.)); +#52113 = DIRECTION('',(0.,1.,-0.)); +#52114 = ADVANCED_FACE('',(#52115),#52140,.F.); +#52115 = FACE_BOUND('',#52116,.T.); +#52116 = EDGE_LOOP('',(#52117,#52118,#52126,#52134)); +#52117 = ORIENTED_EDGE('',*,*,#51948,.T.); +#52118 = ORIENTED_EDGE('',*,*,#52119,.T.); +#52119 = EDGE_CURVE('',#51941,#52120,#52122,.T.); +#52120 = VERTEX_POINT('',#52121); +#52121 = CARTESIAN_POINT('',(8.15,-6.62,0.4)); +#52122 = LINE('',#52123,#52124); +#52123 = CARTESIAN_POINT('',(8.15,-5.72,0.4)); +#52124 = VECTOR('',#52125,1.); +#52125 = DIRECTION('',(-0.,-1.,-0.)); +#52126 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52127 = EDGE_CURVE('',#52128,#52120,#52130,.T.); +#52128 = VERTEX_POINT('',#52129); +#52129 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#52130 = LINE('',#52131,#52132); +#52131 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#52132 = VECTOR('',#52133,1.); +#52133 = DIRECTION('',(-1.,-0.,-0.)); +#52134 = ORIENTED_EDGE('',*,*,#52135,.F.); +#52135 = EDGE_CURVE('',#51872,#52128,#52136,.T.); +#52136 = LINE('',#52137,#52138); +#52137 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#52138 = VECTOR('',#52139,1.); +#52139 = DIRECTION('',(-0.,-1.,-0.)); +#52140 = PLANE('',#52141); +#52141 = AXIS2_PLACEMENT_3D('',#52142,#52143,#52144); +#52142 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#52143 = DIRECTION('',(-0.,-0.,-1.)); +#52144 = DIRECTION('',(0.,1.,-0.)); +#52145 = ADVANCED_FACE('',(#52146),#52157,.T.); +#52146 = FACE_BOUND('',#52147,.F.); +#52147 = EDGE_LOOP('',(#52148,#52149,#52150,#52156)); +#52148 = ORIENTED_EDGE('',*,*,#51940,.T.); +#52149 = ORIENTED_EDGE('',*,*,#52119,.T.); +#52150 = ORIENTED_EDGE('',*,*,#52151,.F.); +#52151 = EDGE_CURVE('',#52096,#52120,#52152,.T.); +#52152 = LINE('',#52153,#52154); +#52153 = CARTESIAN_POINT('',(8.15,-6.62,0.)); +#52154 = VECTOR('',#52155,1.); +#52155 = DIRECTION('',(0.,0.,1.)); +#52156 = ORIENTED_EDGE('',*,*,#52095,.F.); +#52157 = PLANE('',#52158); +#52158 = AXIS2_PLACEMENT_3D('',#52159,#52160,#52161); +#52159 = CARTESIAN_POINT('',(8.15,-5.72,0.)); +#52160 = DIRECTION('',(-1.,-0.,-0.)); +#52161 = DIRECTION('',(0.,1.,0.)); +#52162 = ADVANCED_FACE('',(#52163),#52186,.T.); +#52163 = FACE_BOUND('',#52164,.F.); +#52164 = EDGE_LOOP('',(#52165,#52171,#52179,#52185)); +#52165 = ORIENTED_EDGE('',*,*,#52166,.T.); +#52166 = EDGE_CURVE('',#51992,#52128,#52167,.T.); +#52167 = LINE('',#52168,#52169); +#52168 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#52169 = VECTOR('',#52170,1.); +#52170 = DIRECTION('',(0.,0.,1.)); +#52171 = ORIENTED_EDGE('',*,*,#52172,.T.); +#52172 = EDGE_CURVE('',#52128,#52173,#52175,.T.); +#52173 = VERTEX_POINT('',#52174); +#52174 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#52175 = LINE('',#52176,#52177); +#52176 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#52177 = VECTOR('',#52178,1.); +#52178 = DIRECTION('',(1.,0.,0.)); +#52179 = ORIENTED_EDGE('',*,*,#52180,.F.); +#52180 = EDGE_CURVE('',#51984,#52173,#52181,.T.); +#52181 = LINE('',#52182,#52183); +#52182 = CARTESIAN_POINT('',(9.,-6.62,0.)); +#52183 = VECTOR('',#52184,1.); +#52184 = DIRECTION('',(0.,0.,1.)); +#52185 = ORIENTED_EDGE('',*,*,#51991,.F.); +#52186 = PLANE('',#52187); +#52187 = AXIS2_PLACEMENT_3D('',#52188,#52189,#52190); +#52188 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#52189 = DIRECTION('',(-0.,-1.,-0.)); +#52190 = DIRECTION('',(-1.,0.,0.)); +#52191 = ADVANCED_FACE('',(#52192),#52210,.F.); +#52192 = FACE_BOUND('',#52193,.T.); +#52193 = EDGE_LOOP('',(#52194,#52195,#52203,#52209)); +#52194 = ORIENTED_EDGE('',*,*,#51983,.F.); +#52195 = ORIENTED_EDGE('',*,*,#52196,.T.); +#52196 = EDGE_CURVE('',#51975,#52197,#52199,.T.); +#52197 = VERTEX_POINT('',#52198); +#52198 = CARTESIAN_POINT('',(9.,-6.445,0.4)); +#52199 = LINE('',#52200,#52201); +#52200 = CARTESIAN_POINT('',(9.,-6.445,0.8)); +#52201 = VECTOR('',#52202,1.); +#52202 = DIRECTION('',(0.,0.,1.)); +#52203 = ORIENTED_EDGE('',*,*,#52204,.T.); +#52204 = EDGE_CURVE('',#52197,#52173,#52205,.T.); +#52205 = LINE('',#52206,#52207); +#52206 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#52207 = VECTOR('',#52208,1.); +#52208 = DIRECTION('',(-0.,-1.,-0.)); +#52209 = ORIENTED_EDGE('',*,*,#52180,.F.); +#52210 = PLANE('',#52211); +#52211 = AXIS2_PLACEMENT_3D('',#52212,#52213,#52214); +#52212 = CARTESIAN_POINT('',(9.,-5.72,0.)); +#52213 = DIRECTION('',(-1.,-0.,-0.)); +#52214 = DIRECTION('',(0.,1.,0.)); +#52215 = ADVANCED_FACE('',(#52216),#52236,.F.); +#52216 = FACE_BOUND('',#52217,.F.); +#52217 = EDGE_LOOP('',(#52218,#52219,#52220,#52228,#52235)); +#52218 = ORIENTED_EDGE('',*,*,#51974,.F.); +#52219 = ORIENTED_EDGE('',*,*,#52196,.T.); +#52220 = ORIENTED_EDGE('',*,*,#52221,.T.); +#52221 = EDGE_CURVE('',#52197,#52222,#52224,.T.); +#52222 = VERTEX_POINT('',#52223); +#52223 = CARTESIAN_POINT('',(9.,-6.445,0.8)); +#52224 = LINE('',#52225,#52226); +#52225 = CARTESIAN_POINT('',(9.,-6.445,0.8)); +#52226 = VECTOR('',#52227,1.); +#52227 = DIRECTION('',(0.,0.,1.)); +#52228 = ORIENTED_EDGE('',*,*,#52229,.T.); +#52229 = EDGE_CURVE('',#52222,#52055,#52230,.T.); +#52230 = CIRCLE('',#52231,0.275); +#52231 = AXIS2_PLACEMENT_3D('',#52232,#52233,#52234); +#52232 = CARTESIAN_POINT('',(9.,-6.17,0.8)); +#52233 = DIRECTION('',(0.,0.,-1.)); +#52234 = DIRECTION('',(-1.,-0.,-0.)); +#52235 = ORIENTED_EDGE('',*,*,#52054,.T.); +#52236 = CYLINDRICAL_SURFACE('',#52237,0.275); +#52237 = AXIS2_PLACEMENT_3D('',#52238,#52239,#52240); +#52238 = CARTESIAN_POINT('',(9.,-6.17,0.8)); +#52239 = DIRECTION('',(0.,0.,1.)); +#52240 = DIRECTION('',(-1.,0.,0.)); +#52241 = ADVANCED_FACE('',(#52242),#52260,.T.); +#52242 = FACE_BOUND('',#52243,.F.); +#52243 = EDGE_LOOP('',(#52244,#52245,#52253,#52259)); +#52244 = ORIENTED_EDGE('',*,*,#52029,.T.); +#52245 = ORIENTED_EDGE('',*,*,#52246,.T.); +#52246 = EDGE_CURVE('',#52022,#52247,#52249,.T.); +#52247 = VERTEX_POINT('',#52248); +#52248 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#52249 = LINE('',#52250,#52251); +#52250 = CARTESIAN_POINT('',(8.55,-5.72,0.8)); +#52251 = VECTOR('',#52252,1.); +#52252 = DIRECTION('',(-0.,-1.,-0.)); +#52253 = ORIENTED_EDGE('',*,*,#52254,.F.); +#52254 = EDGE_CURVE('',#52128,#52247,#52255,.T.); +#52255 = LINE('',#52256,#52257); +#52256 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#52257 = VECTOR('',#52258,1.); +#52258 = DIRECTION('',(0.,0.,1.)); +#52259 = ORIENTED_EDGE('',*,*,#52135,.F.); +#52260 = PLANE('',#52261); +#52261 = AXIS2_PLACEMENT_3D('',#52262,#52263,#52264); +#52262 = CARTESIAN_POINT('',(8.55,-5.72,0.4)); +#52263 = DIRECTION('',(-1.,-0.,-0.)); +#52264 = DIRECTION('',(0.,1.,0.)); +#52265 = ADVANCED_FACE('',(#52266),#52287,.T.); +#52266 = FACE_BOUND('',#52267,.F.); +#52267 = EDGE_LOOP('',(#52268,#52269,#52270,#52271,#52272,#52280,#52286) + ); +#52268 = ORIENTED_EDGE('',*,*,#52021,.F.); +#52269 = ORIENTED_EDGE('',*,*,#52079,.T.); +#52270 = ORIENTED_EDGE('',*,*,#52062,.F.); +#52271 = ORIENTED_EDGE('',*,*,#52229,.F.); +#52272 = ORIENTED_EDGE('',*,*,#52273,.T.); +#52273 = EDGE_CURVE('',#52222,#52274,#52276,.T.); +#52274 = VERTEX_POINT('',#52275); +#52275 = CARTESIAN_POINT('',(9.,-6.62,0.8)); +#52276 = LINE('',#52277,#52278); +#52277 = CARTESIAN_POINT('',(9.,-5.72,0.8)); +#52278 = VECTOR('',#52279,1.); +#52279 = DIRECTION('',(-0.,-1.,-0.)); +#52280 = ORIENTED_EDGE('',*,*,#52281,.F.); +#52281 = EDGE_CURVE('',#52247,#52274,#52282,.T.); +#52282 = LINE('',#52283,#52284); +#52283 = CARTESIAN_POINT('',(8.55,-6.62,0.8)); +#52284 = VECTOR('',#52285,1.); +#52285 = DIRECTION('',(1.,0.,0.)); +#52286 = ORIENTED_EDGE('',*,*,#52246,.F.); +#52287 = PLANE('',#52288); +#52288 = AXIS2_PLACEMENT_3D('',#52289,#52290,#52291); +#52289 = CARTESIAN_POINT('',(8.775,-6.17,0.8)); +#52290 = DIRECTION('',(0.,0.,1.)); +#52291 = DIRECTION('',(1.,0.,-0.)); +#52292 = ADVANCED_FACE('',(#52293),#52299,.T.); +#52293 = FACE_BOUND('',#52294,.F.); +#52294 = EDGE_LOOP('',(#52295,#52296,#52297,#52298)); +#52295 = ORIENTED_EDGE('',*,*,#52103,.T.); +#52296 = ORIENTED_EDGE('',*,*,#52151,.T.); +#52297 = ORIENTED_EDGE('',*,*,#52127,.F.); +#52298 = ORIENTED_EDGE('',*,*,#52166,.F.); +#52299 = PLANE('',#52300); +#52300 = AXIS2_PLACEMENT_3D('',#52301,#52302,#52303); +#52301 = CARTESIAN_POINT('',(8.55,-6.62,0.)); +#52302 = DIRECTION('',(-0.,-1.,-0.)); +#52303 = DIRECTION('',(0.,0.,-1.)); +#52304 = ADVANCED_FACE('',(#52305),#52316,.T.); +#52305 = FACE_BOUND('',#52306,.F.); +#52306 = EDGE_LOOP('',(#52307,#52308,#52309,#52315)); +#52307 = ORIENTED_EDGE('',*,*,#52254,.T.); +#52308 = ORIENTED_EDGE('',*,*,#52281,.T.); +#52309 = ORIENTED_EDGE('',*,*,#52310,.F.); +#52310 = EDGE_CURVE('',#52173,#52274,#52311,.T.); +#52311 = LINE('',#52312,#52313); +#52312 = CARTESIAN_POINT('',(9.,-6.62,0.4)); +#52313 = VECTOR('',#52314,1.); +#52314 = DIRECTION('',(0.,0.,1.)); +#52315 = ORIENTED_EDGE('',*,*,#52172,.F.); +#52316 = PLANE('',#52317); +#52317 = AXIS2_PLACEMENT_3D('',#52318,#52319,#52320); +#52318 = CARTESIAN_POINT('',(8.55,-6.62,0.4)); +#52319 = DIRECTION('',(-0.,-1.,-0.)); +#52320 = DIRECTION('',(-1.,0.,0.)); +#52321 = ADVANCED_FACE('',(#52322),#52328,.F.); +#52322 = FACE_BOUND('',#52323,.T.); +#52323 = EDGE_LOOP('',(#52324,#52325,#52326,#52327)); +#52324 = ORIENTED_EDGE('',*,*,#52204,.F.); +#52325 = ORIENTED_EDGE('',*,*,#52221,.T.); +#52326 = ORIENTED_EDGE('',*,*,#52273,.T.); +#52327 = ORIENTED_EDGE('',*,*,#52310,.F.); +#52328 = PLANE('',#52329); +#52329 = AXIS2_PLACEMENT_3D('',#52330,#52331,#52332); +#52330 = CARTESIAN_POINT('',(9.,-5.72,0.4)); +#52331 = DIRECTION('',(-1.,-0.,-0.)); +#52332 = DIRECTION('',(0.,1.,0.)); +#52333 = MANIFOLD_SOLID_BREP('',#52334); +#52334 = CLOSED_SHELL('',(#52335,#52375,#52406,#52437,#52487,#52518, + #52551,#52568,#52592,#52623,#52640,#52669,#52693,#52719,#52743, + #52770,#52782,#52799)); +#52335 = ADVANCED_FACE('',(#52336),#52370,.T.); +#52336 = FACE_BOUND('',#52337,.F.); +#52337 = EDGE_LOOP('',(#52338,#52348,#52356,#52364)); +#52338 = ORIENTED_EDGE('',*,*,#52339,.T.); +#52339 = EDGE_CURVE('',#52340,#52342,#52344,.T.); +#52340 = VERTEX_POINT('',#52341); +#52341 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52342 = VERTEX_POINT('',#52343); +#52343 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52344 = LINE('',#52345,#52346); +#52345 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52346 = VECTOR('',#52347,1.); +#52347 = DIRECTION('',(0.,0.,1.)); +#52348 = ORIENTED_EDGE('',*,*,#52349,.T.); +#52349 = EDGE_CURVE('',#52342,#52350,#52352,.T.); +#52350 = VERTEX_POINT('',#52351); +#52351 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52352 = LINE('',#52353,#52354); +#52353 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52354 = VECTOR('',#52355,1.); +#52355 = DIRECTION('',(-1.,-0.,-0.)); +#52356 = ORIENTED_EDGE('',*,*,#52357,.F.); +#52357 = EDGE_CURVE('',#52358,#52350,#52360,.T.); +#52358 = VERTEX_POINT('',#52359); +#52359 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52360 = LINE('',#52361,#52362); +#52361 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52362 = VECTOR('',#52363,1.); +#52363 = DIRECTION('',(0.,0.,1.)); +#52364 = ORIENTED_EDGE('',*,*,#52365,.F.); +#52365 = EDGE_CURVE('',#52340,#52358,#52366,.T.); +#52366 = LINE('',#52367,#52368); +#52367 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52368 = VECTOR('',#52369,1.); +#52369 = DIRECTION('',(-1.,-0.,-0.)); +#52370 = PLANE('',#52371); +#52371 = AXIS2_PLACEMENT_3D('',#52372,#52373,#52374); +#52372 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52373 = DIRECTION('',(0.,1.,0.)); +#52374 = DIRECTION('',(1.,0.,0.)); +#52375 = ADVANCED_FACE('',(#52376),#52401,.F.); +#52376 = FACE_BOUND('',#52377,.T.); +#52377 = EDGE_LOOP('',(#52378,#52386,#52387,#52395)); +#52378 = ORIENTED_EDGE('',*,*,#52379,.F.); +#52379 = EDGE_CURVE('',#52340,#52380,#52382,.T.); +#52380 = VERTEX_POINT('',#52381); +#52381 = CARTESIAN_POINT('',(9.,-7.165,0.)); +#52382 = LINE('',#52383,#52384); +#52383 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52384 = VECTOR('',#52385,1.); +#52385 = DIRECTION('',(-0.,-1.,-0.)); +#52386 = ORIENTED_EDGE('',*,*,#52339,.T.); +#52387 = ORIENTED_EDGE('',*,*,#52388,.T.); +#52388 = EDGE_CURVE('',#52342,#52389,#52391,.T.); +#52389 = VERTEX_POINT('',#52390); +#52390 = CARTESIAN_POINT('',(9.,-7.165,0.4)); +#52391 = LINE('',#52392,#52393); +#52392 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52393 = VECTOR('',#52394,1.); +#52394 = DIRECTION('',(-0.,-1.,-0.)); +#52395 = ORIENTED_EDGE('',*,*,#52396,.F.); +#52396 = EDGE_CURVE('',#52380,#52389,#52397,.T.); +#52397 = LINE('',#52398,#52399); +#52398 = CARTESIAN_POINT('',(9.,-7.165,0.8)); +#52399 = VECTOR('',#52400,1.); +#52400 = DIRECTION('',(0.,0.,1.)); +#52401 = PLANE('',#52402); +#52402 = AXIS2_PLACEMENT_3D('',#52403,#52404,#52405); +#52403 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52404 = DIRECTION('',(-1.,-0.,-0.)); +#52405 = DIRECTION('',(0.,1.,0.)); +#52406 = ADVANCED_FACE('',(#52407),#52432,.F.); +#52407 = FACE_BOUND('',#52408,.T.); +#52408 = EDGE_LOOP('',(#52409,#52417,#52425,#52431)); +#52409 = ORIENTED_EDGE('',*,*,#52410,.T.); +#52410 = EDGE_CURVE('',#52358,#52411,#52413,.T.); +#52411 = VERTEX_POINT('',#52412); +#52412 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#52413 = LINE('',#52414,#52415); +#52414 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52415 = VECTOR('',#52416,1.); +#52416 = DIRECTION('',(-1.,-0.,-0.)); +#52417 = ORIENTED_EDGE('',*,*,#52418,.T.); +#52418 = EDGE_CURVE('',#52411,#52419,#52421,.T.); +#52419 = VERTEX_POINT('',#52420); +#52420 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#52421 = LINE('',#52422,#52423); +#52422 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#52423 = VECTOR('',#52424,1.); +#52424 = DIRECTION('',(0.,0.,1.)); +#52425 = ORIENTED_EDGE('',*,*,#52426,.F.); +#52426 = EDGE_CURVE('',#52350,#52419,#52427,.T.); +#52427 = LINE('',#52428,#52429); +#52428 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52429 = VECTOR('',#52430,1.); +#52430 = DIRECTION('',(-1.,-0.,-0.)); +#52431 = ORIENTED_EDGE('',*,*,#52357,.F.); +#52432 = PLANE('',#52433); +#52433 = AXIS2_PLACEMENT_3D('',#52434,#52435,#52436); +#52434 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52435 = DIRECTION('',(-0.,-1.,-0.)); +#52436 = DIRECTION('',(0.,0.,-1.)); +#52437 = ADVANCED_FACE('',(#52438),#52482,.F.); +#52438 = FACE_BOUND('',#52439,.T.); +#52439 = EDGE_LOOP('',(#52440,#52441,#52442,#52451,#52460,#52468,#52476) + ); +#52440 = ORIENTED_EDGE('',*,*,#52365,.F.); +#52441 = ORIENTED_EDGE('',*,*,#52379,.T.); +#52442 = ORIENTED_EDGE('',*,*,#52443,.F.); +#52443 = EDGE_CURVE('',#52444,#52380,#52446,.T.); +#52444 = VERTEX_POINT('',#52445); +#52445 = CARTESIAN_POINT('',(8.725,-7.44,0.)); +#52446 = CIRCLE('',#52447,0.275); +#52447 = AXIS2_PLACEMENT_3D('',#52448,#52449,#52450); +#52448 = CARTESIAN_POINT('',(9.,-7.44,0.)); +#52449 = DIRECTION('',(0.,0.,-1.)); +#52450 = DIRECTION('',(-1.,-0.,-0.)); +#52451 = ORIENTED_EDGE('',*,*,#52452,.F.); +#52452 = EDGE_CURVE('',#52453,#52444,#52455,.T.); +#52453 = VERTEX_POINT('',#52454); +#52454 = CARTESIAN_POINT('',(9.,-7.715,0.)); +#52455 = CIRCLE('',#52456,0.275); +#52456 = AXIS2_PLACEMENT_3D('',#52457,#52458,#52459); +#52457 = CARTESIAN_POINT('',(9.,-7.44,0.)); +#52458 = DIRECTION('',(0.,0.,-1.)); +#52459 = DIRECTION('',(-1.,-0.,-0.)); +#52460 = ORIENTED_EDGE('',*,*,#52461,.T.); +#52461 = EDGE_CURVE('',#52453,#52462,#52464,.T.); +#52462 = VERTEX_POINT('',#52463); +#52463 = CARTESIAN_POINT('',(9.,-7.89,0.)); +#52464 = LINE('',#52465,#52466); +#52465 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52466 = VECTOR('',#52467,1.); +#52467 = DIRECTION('',(-0.,-1.,-0.)); +#52468 = ORIENTED_EDGE('',*,*,#52469,.F.); +#52469 = EDGE_CURVE('',#52470,#52462,#52472,.T.); +#52470 = VERTEX_POINT('',#52471); +#52471 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52472 = LINE('',#52473,#52474); +#52473 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52474 = VECTOR('',#52475,1.); +#52475 = DIRECTION('',(1.,0.,0.)); +#52476 = ORIENTED_EDGE('',*,*,#52477,.F.); +#52477 = EDGE_CURVE('',#52358,#52470,#52478,.T.); +#52478 = LINE('',#52479,#52480); +#52479 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52480 = VECTOR('',#52481,1.); +#52481 = DIRECTION('',(-0.,-1.,-0.)); +#52482 = PLANE('',#52483); +#52483 = AXIS2_PLACEMENT_3D('',#52484,#52485,#52486); +#52484 = CARTESIAN_POINT('',(8.775,-7.44,0.)); +#52485 = DIRECTION('',(0.,0.,1.)); +#52486 = DIRECTION('',(1.,0.,-0.)); +#52487 = ADVANCED_FACE('',(#52488),#52513,.T.); +#52488 = FACE_BOUND('',#52489,.F.); +#52489 = EDGE_LOOP('',(#52490,#52498,#52506,#52512)); +#52490 = ORIENTED_EDGE('',*,*,#52491,.T.); +#52491 = EDGE_CURVE('',#52342,#52492,#52494,.T.); +#52492 = VERTEX_POINT('',#52493); +#52493 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#52494 = LINE('',#52495,#52496); +#52495 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52496 = VECTOR('',#52497,1.); +#52497 = DIRECTION('',(0.,0.,1.)); +#52498 = ORIENTED_EDGE('',*,*,#52499,.T.); +#52499 = EDGE_CURVE('',#52492,#52500,#52502,.T.); +#52500 = VERTEX_POINT('',#52501); +#52501 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#52502 = LINE('',#52503,#52504); +#52503 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#52504 = VECTOR('',#52505,1.); +#52505 = DIRECTION('',(-1.,-0.,-0.)); +#52506 = ORIENTED_EDGE('',*,*,#52507,.F.); +#52507 = EDGE_CURVE('',#52350,#52500,#52508,.T.); +#52508 = LINE('',#52509,#52510); +#52509 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52510 = VECTOR('',#52511,1.); +#52511 = DIRECTION('',(0.,0.,1.)); +#52512 = ORIENTED_EDGE('',*,*,#52349,.F.); +#52513 = PLANE('',#52514); +#52514 = AXIS2_PLACEMENT_3D('',#52515,#52516,#52517); +#52515 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52516 = DIRECTION('',(0.,1.,0.)); +#52517 = DIRECTION('',(1.,0.,0.)); +#52518 = ADVANCED_FACE('',(#52519),#52546,.F.); +#52519 = FACE_BOUND('',#52520,.F.); +#52520 = EDGE_LOOP('',(#52521,#52529,#52530,#52531,#52539)); +#52521 = ORIENTED_EDGE('',*,*,#52522,.F.); +#52522 = EDGE_CURVE('',#52389,#52523,#52525,.T.); +#52523 = VERTEX_POINT('',#52524); +#52524 = CARTESIAN_POINT('',(9.,-7.165,0.8)); +#52525 = LINE('',#52526,#52527); +#52526 = CARTESIAN_POINT('',(9.,-7.165,0.8)); +#52527 = VECTOR('',#52528,1.); +#52528 = DIRECTION('',(0.,0.,1.)); +#52529 = ORIENTED_EDGE('',*,*,#52396,.F.); +#52530 = ORIENTED_EDGE('',*,*,#52443,.F.); +#52531 = ORIENTED_EDGE('',*,*,#52532,.F.); +#52532 = EDGE_CURVE('',#52533,#52444,#52535,.T.); +#52533 = VERTEX_POINT('',#52534); +#52534 = CARTESIAN_POINT('',(8.725,-7.44,0.8)); +#52535 = LINE('',#52536,#52537); +#52536 = CARTESIAN_POINT('',(8.725,-7.44,0.8)); +#52537 = VECTOR('',#52538,1.); +#52538 = DIRECTION('',(0.,0.,-1.)); +#52539 = ORIENTED_EDGE('',*,*,#52540,.T.); +#52540 = EDGE_CURVE('',#52533,#52523,#52541,.T.); +#52541 = CIRCLE('',#52542,0.275); +#52542 = AXIS2_PLACEMENT_3D('',#52543,#52544,#52545); +#52543 = CARTESIAN_POINT('',(9.,-7.44,0.8)); +#52544 = DIRECTION('',(0.,0.,-1.)); +#52545 = DIRECTION('',(-1.,-0.,-0.)); +#52546 = CYLINDRICAL_SURFACE('',#52547,0.275); +#52547 = AXIS2_PLACEMENT_3D('',#52548,#52549,#52550); +#52548 = CARTESIAN_POINT('',(9.,-7.44,0.8)); +#52549 = DIRECTION('',(0.,0.,1.)); +#52550 = DIRECTION('',(-1.,0.,0.)); +#52551 = ADVANCED_FACE('',(#52552),#52563,.F.); +#52552 = FACE_BOUND('',#52553,.T.); +#52553 = EDGE_LOOP('',(#52554,#52555,#52556,#52562)); +#52554 = ORIENTED_EDGE('',*,*,#52388,.F.); +#52555 = ORIENTED_EDGE('',*,*,#52491,.T.); +#52556 = ORIENTED_EDGE('',*,*,#52557,.T.); +#52557 = EDGE_CURVE('',#52492,#52523,#52558,.T.); +#52558 = LINE('',#52559,#52560); +#52559 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#52560 = VECTOR('',#52561,1.); +#52561 = DIRECTION('',(-0.,-1.,-0.)); +#52562 = ORIENTED_EDGE('',*,*,#52522,.F.); +#52563 = PLANE('',#52564); +#52564 = AXIS2_PLACEMENT_3D('',#52565,#52566,#52567); +#52565 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52566 = DIRECTION('',(-1.,-0.,-0.)); +#52567 = DIRECTION('',(0.,1.,0.)); +#52568 = ADVANCED_FACE('',(#52569),#52587,.T.); +#52569 = FACE_BOUND('',#52570,.F.); +#52570 = EDGE_LOOP('',(#52571,#52572,#52580,#52586)); +#52571 = ORIENTED_EDGE('',*,*,#52410,.T.); +#52572 = ORIENTED_EDGE('',*,*,#52573,.T.); +#52573 = EDGE_CURVE('',#52411,#52574,#52576,.T.); +#52574 = VERTEX_POINT('',#52575); +#52575 = CARTESIAN_POINT('',(8.15,-7.89,0.)); +#52576 = LINE('',#52577,#52578); +#52577 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#52578 = VECTOR('',#52579,1.); +#52579 = DIRECTION('',(-0.,-1.,-0.)); +#52580 = ORIENTED_EDGE('',*,*,#52581,.F.); +#52581 = EDGE_CURVE('',#52470,#52574,#52582,.T.); +#52582 = LINE('',#52583,#52584); +#52583 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52584 = VECTOR('',#52585,1.); +#52585 = DIRECTION('',(-1.,-0.,-0.)); +#52586 = ORIENTED_EDGE('',*,*,#52477,.F.); +#52587 = PLANE('',#52588); +#52588 = AXIS2_PLACEMENT_3D('',#52589,#52590,#52591); +#52589 = CARTESIAN_POINT('',(8.55,-6.99,0.)); +#52590 = DIRECTION('',(-0.,-0.,-1.)); +#52591 = DIRECTION('',(0.,1.,-0.)); +#52592 = ADVANCED_FACE('',(#52593),#52618,.F.); +#52593 = FACE_BOUND('',#52594,.T.); +#52594 = EDGE_LOOP('',(#52595,#52596,#52604,#52612)); +#52595 = ORIENTED_EDGE('',*,*,#52426,.T.); +#52596 = ORIENTED_EDGE('',*,*,#52597,.T.); +#52597 = EDGE_CURVE('',#52419,#52598,#52600,.T.); +#52598 = VERTEX_POINT('',#52599); +#52599 = CARTESIAN_POINT('',(8.15,-7.89,0.4)); +#52600 = LINE('',#52601,#52602); +#52601 = CARTESIAN_POINT('',(8.15,-6.99,0.4)); +#52602 = VECTOR('',#52603,1.); +#52603 = DIRECTION('',(-0.,-1.,-0.)); +#52604 = ORIENTED_EDGE('',*,*,#52605,.F.); +#52605 = EDGE_CURVE('',#52606,#52598,#52608,.T.); +#52606 = VERTEX_POINT('',#52607); +#52607 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#52608 = LINE('',#52609,#52610); +#52609 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#52610 = VECTOR('',#52611,1.); +#52611 = DIRECTION('',(-1.,-0.,-0.)); +#52612 = ORIENTED_EDGE('',*,*,#52613,.F.); +#52613 = EDGE_CURVE('',#52350,#52606,#52614,.T.); +#52614 = LINE('',#52615,#52616); +#52615 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52616 = VECTOR('',#52617,1.); +#52617 = DIRECTION('',(-0.,-1.,-0.)); +#52618 = PLANE('',#52619); +#52619 = AXIS2_PLACEMENT_3D('',#52620,#52621,#52622); +#52620 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52621 = DIRECTION('',(-0.,-0.,-1.)); +#52622 = DIRECTION('',(0.,1.,-0.)); +#52623 = ADVANCED_FACE('',(#52624),#52635,.T.); +#52624 = FACE_BOUND('',#52625,.F.); +#52625 = EDGE_LOOP('',(#52626,#52627,#52628,#52634)); +#52626 = ORIENTED_EDGE('',*,*,#52418,.T.); +#52627 = ORIENTED_EDGE('',*,*,#52597,.T.); +#52628 = ORIENTED_EDGE('',*,*,#52629,.F.); +#52629 = EDGE_CURVE('',#52574,#52598,#52630,.T.); +#52630 = LINE('',#52631,#52632); +#52631 = CARTESIAN_POINT('',(8.15,-7.89,0.)); +#52632 = VECTOR('',#52633,1.); +#52633 = DIRECTION('',(0.,0.,1.)); +#52634 = ORIENTED_EDGE('',*,*,#52573,.F.); +#52635 = PLANE('',#52636); +#52636 = AXIS2_PLACEMENT_3D('',#52637,#52638,#52639); +#52637 = CARTESIAN_POINT('',(8.15,-6.99,0.)); +#52638 = DIRECTION('',(-1.,-0.,-0.)); +#52639 = DIRECTION('',(0.,1.,0.)); +#52640 = ADVANCED_FACE('',(#52641),#52664,.T.); +#52641 = FACE_BOUND('',#52642,.F.); +#52642 = EDGE_LOOP('',(#52643,#52649,#52657,#52663)); +#52643 = ORIENTED_EDGE('',*,*,#52644,.T.); +#52644 = EDGE_CURVE('',#52470,#52606,#52645,.T.); +#52645 = LINE('',#52646,#52647); +#52646 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52647 = VECTOR('',#52648,1.); +#52648 = DIRECTION('',(0.,0.,1.)); +#52649 = ORIENTED_EDGE('',*,*,#52650,.T.); +#52650 = EDGE_CURVE('',#52606,#52651,#52653,.T.); +#52651 = VERTEX_POINT('',#52652); +#52652 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#52653 = LINE('',#52654,#52655); +#52654 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#52655 = VECTOR('',#52656,1.); +#52656 = DIRECTION('',(1.,0.,0.)); +#52657 = ORIENTED_EDGE('',*,*,#52658,.F.); +#52658 = EDGE_CURVE('',#52462,#52651,#52659,.T.); +#52659 = LINE('',#52660,#52661); +#52660 = CARTESIAN_POINT('',(9.,-7.89,0.)); +#52661 = VECTOR('',#52662,1.); +#52662 = DIRECTION('',(0.,0.,1.)); +#52663 = ORIENTED_EDGE('',*,*,#52469,.F.); +#52664 = PLANE('',#52665); +#52665 = AXIS2_PLACEMENT_3D('',#52666,#52667,#52668); +#52666 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52667 = DIRECTION('',(-0.,-1.,-0.)); +#52668 = DIRECTION('',(-1.,0.,0.)); +#52669 = ADVANCED_FACE('',(#52670),#52688,.F.); +#52670 = FACE_BOUND('',#52671,.T.); +#52671 = EDGE_LOOP('',(#52672,#52673,#52681,#52687)); +#52672 = ORIENTED_EDGE('',*,*,#52461,.F.); +#52673 = ORIENTED_EDGE('',*,*,#52674,.T.); +#52674 = EDGE_CURVE('',#52453,#52675,#52677,.T.); +#52675 = VERTEX_POINT('',#52676); +#52676 = CARTESIAN_POINT('',(9.,-7.715,0.4)); +#52677 = LINE('',#52678,#52679); +#52678 = CARTESIAN_POINT('',(9.,-7.715,0.8)); +#52679 = VECTOR('',#52680,1.); +#52680 = DIRECTION('',(0.,0.,1.)); +#52681 = ORIENTED_EDGE('',*,*,#52682,.T.); +#52682 = EDGE_CURVE('',#52675,#52651,#52683,.T.); +#52683 = LINE('',#52684,#52685); +#52684 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52685 = VECTOR('',#52686,1.); +#52686 = DIRECTION('',(-0.,-1.,-0.)); +#52687 = ORIENTED_EDGE('',*,*,#52658,.F.); +#52688 = PLANE('',#52689); +#52689 = AXIS2_PLACEMENT_3D('',#52690,#52691,#52692); +#52690 = CARTESIAN_POINT('',(9.,-6.99,0.)); +#52691 = DIRECTION('',(-1.,-0.,-0.)); +#52692 = DIRECTION('',(0.,1.,0.)); +#52693 = ADVANCED_FACE('',(#52694),#52714,.F.); +#52694 = FACE_BOUND('',#52695,.F.); +#52695 = EDGE_LOOP('',(#52696,#52697,#52698,#52706,#52713)); +#52696 = ORIENTED_EDGE('',*,*,#52452,.F.); +#52697 = ORIENTED_EDGE('',*,*,#52674,.T.); +#52698 = ORIENTED_EDGE('',*,*,#52699,.T.); +#52699 = EDGE_CURVE('',#52675,#52700,#52702,.T.); +#52700 = VERTEX_POINT('',#52701); +#52701 = CARTESIAN_POINT('',(9.,-7.715,0.8)); +#52702 = LINE('',#52703,#52704); +#52703 = CARTESIAN_POINT('',(9.,-7.715,0.8)); +#52704 = VECTOR('',#52705,1.); +#52705 = DIRECTION('',(0.,0.,1.)); +#52706 = ORIENTED_EDGE('',*,*,#52707,.T.); +#52707 = EDGE_CURVE('',#52700,#52533,#52708,.T.); +#52708 = CIRCLE('',#52709,0.275); +#52709 = AXIS2_PLACEMENT_3D('',#52710,#52711,#52712); +#52710 = CARTESIAN_POINT('',(9.,-7.44,0.8)); +#52711 = DIRECTION('',(0.,0.,-1.)); +#52712 = DIRECTION('',(-1.,-0.,-0.)); +#52713 = ORIENTED_EDGE('',*,*,#52532,.T.); +#52714 = CYLINDRICAL_SURFACE('',#52715,0.275); +#52715 = AXIS2_PLACEMENT_3D('',#52716,#52717,#52718); +#52716 = CARTESIAN_POINT('',(9.,-7.44,0.8)); +#52717 = DIRECTION('',(0.,0.,1.)); +#52718 = DIRECTION('',(-1.,0.,0.)); +#52719 = ADVANCED_FACE('',(#52720),#52738,.T.); +#52720 = FACE_BOUND('',#52721,.F.); +#52721 = EDGE_LOOP('',(#52722,#52723,#52731,#52737)); +#52722 = ORIENTED_EDGE('',*,*,#52507,.T.); +#52723 = ORIENTED_EDGE('',*,*,#52724,.T.); +#52724 = EDGE_CURVE('',#52500,#52725,#52727,.T.); +#52725 = VERTEX_POINT('',#52726); +#52726 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#52727 = LINE('',#52728,#52729); +#52728 = CARTESIAN_POINT('',(8.55,-6.99,0.8)); +#52729 = VECTOR('',#52730,1.); +#52730 = DIRECTION('',(-0.,-1.,-0.)); +#52731 = ORIENTED_EDGE('',*,*,#52732,.F.); +#52732 = EDGE_CURVE('',#52606,#52725,#52733,.T.); +#52733 = LINE('',#52734,#52735); +#52734 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#52735 = VECTOR('',#52736,1.); +#52736 = DIRECTION('',(0.,0.,1.)); +#52737 = ORIENTED_EDGE('',*,*,#52613,.F.); +#52738 = PLANE('',#52739); +#52739 = AXIS2_PLACEMENT_3D('',#52740,#52741,#52742); +#52740 = CARTESIAN_POINT('',(8.55,-6.99,0.4)); +#52741 = DIRECTION('',(-1.,-0.,-0.)); +#52742 = DIRECTION('',(0.,1.,0.)); +#52743 = ADVANCED_FACE('',(#52744),#52765,.T.); +#52744 = FACE_BOUND('',#52745,.F.); +#52745 = EDGE_LOOP('',(#52746,#52747,#52748,#52749,#52750,#52758,#52764) + ); +#52746 = ORIENTED_EDGE('',*,*,#52499,.F.); +#52747 = ORIENTED_EDGE('',*,*,#52557,.T.); +#52748 = ORIENTED_EDGE('',*,*,#52540,.F.); +#52749 = ORIENTED_EDGE('',*,*,#52707,.F.); +#52750 = ORIENTED_EDGE('',*,*,#52751,.T.); +#52751 = EDGE_CURVE('',#52700,#52752,#52754,.T.); +#52752 = VERTEX_POINT('',#52753); +#52753 = CARTESIAN_POINT('',(9.,-7.89,0.8)); +#52754 = LINE('',#52755,#52756); +#52755 = CARTESIAN_POINT('',(9.,-6.99,0.8)); +#52756 = VECTOR('',#52757,1.); +#52757 = DIRECTION('',(-0.,-1.,-0.)); +#52758 = ORIENTED_EDGE('',*,*,#52759,.F.); +#52759 = EDGE_CURVE('',#52725,#52752,#52760,.T.); +#52760 = LINE('',#52761,#52762); +#52761 = CARTESIAN_POINT('',(8.55,-7.89,0.8)); +#52762 = VECTOR('',#52763,1.); +#52763 = DIRECTION('',(1.,0.,0.)); +#52764 = ORIENTED_EDGE('',*,*,#52724,.F.); +#52765 = PLANE('',#52766); +#52766 = AXIS2_PLACEMENT_3D('',#52767,#52768,#52769); +#52767 = CARTESIAN_POINT('',(8.775,-7.44,0.8)); +#52768 = DIRECTION('',(0.,0.,1.)); +#52769 = DIRECTION('',(1.,0.,-0.)); +#52770 = ADVANCED_FACE('',(#52771),#52777,.T.); +#52771 = FACE_BOUND('',#52772,.F.); +#52772 = EDGE_LOOP('',(#52773,#52774,#52775,#52776)); +#52773 = ORIENTED_EDGE('',*,*,#52581,.T.); +#52774 = ORIENTED_EDGE('',*,*,#52629,.T.); +#52775 = ORIENTED_EDGE('',*,*,#52605,.F.); +#52776 = ORIENTED_EDGE('',*,*,#52644,.F.); +#52777 = PLANE('',#52778); +#52778 = AXIS2_PLACEMENT_3D('',#52779,#52780,#52781); +#52779 = CARTESIAN_POINT('',(8.55,-7.89,0.)); +#52780 = DIRECTION('',(-0.,-1.,-0.)); +#52781 = DIRECTION('',(0.,0.,-1.)); +#52782 = ADVANCED_FACE('',(#52783),#52794,.T.); +#52783 = FACE_BOUND('',#52784,.F.); +#52784 = EDGE_LOOP('',(#52785,#52786,#52787,#52793)); +#52785 = ORIENTED_EDGE('',*,*,#52732,.T.); +#52786 = ORIENTED_EDGE('',*,*,#52759,.T.); +#52787 = ORIENTED_EDGE('',*,*,#52788,.F.); +#52788 = EDGE_CURVE('',#52651,#52752,#52789,.T.); +#52789 = LINE('',#52790,#52791); +#52790 = CARTESIAN_POINT('',(9.,-7.89,0.4)); +#52791 = VECTOR('',#52792,1.); +#52792 = DIRECTION('',(0.,0.,1.)); +#52793 = ORIENTED_EDGE('',*,*,#52650,.F.); +#52794 = PLANE('',#52795); +#52795 = AXIS2_PLACEMENT_3D('',#52796,#52797,#52798); +#52796 = CARTESIAN_POINT('',(8.55,-7.89,0.4)); +#52797 = DIRECTION('',(-0.,-1.,-0.)); +#52798 = DIRECTION('',(-1.,0.,0.)); +#52799 = ADVANCED_FACE('',(#52800),#52806,.F.); +#52800 = FACE_BOUND('',#52801,.T.); +#52801 = EDGE_LOOP('',(#52802,#52803,#52804,#52805)); +#52802 = ORIENTED_EDGE('',*,*,#52682,.F.); +#52803 = ORIENTED_EDGE('',*,*,#52699,.T.); +#52804 = ORIENTED_EDGE('',*,*,#52751,.T.); +#52805 = ORIENTED_EDGE('',*,*,#52788,.F.); +#52806 = PLANE('',#52807); +#52807 = AXIS2_PLACEMENT_3D('',#52808,#52809,#52810); +#52808 = CARTESIAN_POINT('',(9.,-6.99,0.4)); +#52809 = DIRECTION('',(-1.,-0.,-0.)); +#52810 = DIRECTION('',(0.,1.,0.)); +#52811 = MANIFOLD_SOLID_BREP('',#52812); +#52812 = CLOSED_SHELL('',(#52813,#52853,#52884,#52915,#52965,#52996, + #53029,#53046,#53070,#53101,#53118,#53147,#53171,#53197,#53221, + #53248,#53260,#53277)); +#52813 = ADVANCED_FACE('',(#52814),#52848,.T.); +#52814 = FACE_BOUND('',#52815,.F.); +#52815 = EDGE_LOOP('',(#52816,#52826,#52834,#52842)); +#52816 = ORIENTED_EDGE('',*,*,#52817,.T.); +#52817 = EDGE_CURVE('',#52818,#52820,#52822,.T.); +#52818 = VERTEX_POINT('',#52819); +#52819 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52820 = VERTEX_POINT('',#52821); +#52821 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#52822 = LINE('',#52823,#52824); +#52823 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52824 = VECTOR('',#52825,1.); +#52825 = DIRECTION('',(0.,0.,1.)); +#52826 = ORIENTED_EDGE('',*,*,#52827,.T.); +#52827 = EDGE_CURVE('',#52820,#52828,#52830,.T.); +#52828 = VERTEX_POINT('',#52829); +#52829 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#52830 = LINE('',#52831,#52832); +#52831 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#52832 = VECTOR('',#52833,1.); +#52833 = DIRECTION('',(-1.,-0.,-0.)); +#52834 = ORIENTED_EDGE('',*,*,#52835,.F.); +#52835 = EDGE_CURVE('',#52836,#52828,#52838,.T.); +#52836 = VERTEX_POINT('',#52837); +#52837 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#52838 = LINE('',#52839,#52840); +#52839 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#52840 = VECTOR('',#52841,1.); +#52841 = DIRECTION('',(0.,0.,1.)); +#52842 = ORIENTED_EDGE('',*,*,#52843,.F.); +#52843 = EDGE_CURVE('',#52818,#52836,#52844,.T.); +#52844 = LINE('',#52845,#52846); +#52845 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52846 = VECTOR('',#52847,1.); +#52847 = DIRECTION('',(-1.,-0.,-0.)); +#52848 = PLANE('',#52849); +#52849 = AXIS2_PLACEMENT_3D('',#52850,#52851,#52852); +#52850 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52851 = DIRECTION('',(0.,1.,0.)); +#52852 = DIRECTION('',(1.,0.,0.)); +#52853 = ADVANCED_FACE('',(#52854),#52879,.F.); +#52854 = FACE_BOUND('',#52855,.T.); +#52855 = EDGE_LOOP('',(#52856,#52864,#52865,#52873)); +#52856 = ORIENTED_EDGE('',*,*,#52857,.F.); +#52857 = EDGE_CURVE('',#52818,#52858,#52860,.T.); +#52858 = VERTEX_POINT('',#52859); +#52859 = CARTESIAN_POINT('',(9.,-8.435,0.)); +#52860 = LINE('',#52861,#52862); +#52861 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52862 = VECTOR('',#52863,1.); +#52863 = DIRECTION('',(-0.,-1.,-0.)); +#52864 = ORIENTED_EDGE('',*,*,#52817,.T.); +#52865 = ORIENTED_EDGE('',*,*,#52866,.T.); +#52866 = EDGE_CURVE('',#52820,#52867,#52869,.T.); +#52867 = VERTEX_POINT('',#52868); +#52868 = CARTESIAN_POINT('',(9.,-8.435,0.4)); +#52869 = LINE('',#52870,#52871); +#52870 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#52871 = VECTOR('',#52872,1.); +#52872 = DIRECTION('',(-0.,-1.,-0.)); +#52873 = ORIENTED_EDGE('',*,*,#52874,.F.); +#52874 = EDGE_CURVE('',#52858,#52867,#52875,.T.); +#52875 = LINE('',#52876,#52877); +#52876 = CARTESIAN_POINT('',(9.,-8.435,0.8)); +#52877 = VECTOR('',#52878,1.); +#52878 = DIRECTION('',(0.,0.,1.)); +#52879 = PLANE('',#52880); +#52880 = AXIS2_PLACEMENT_3D('',#52881,#52882,#52883); +#52881 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52882 = DIRECTION('',(-1.,-0.,-0.)); +#52883 = DIRECTION('',(0.,1.,0.)); +#52884 = ADVANCED_FACE('',(#52885),#52910,.F.); +#52885 = FACE_BOUND('',#52886,.T.); +#52886 = EDGE_LOOP('',(#52887,#52895,#52903,#52909)); +#52887 = ORIENTED_EDGE('',*,*,#52888,.T.); +#52888 = EDGE_CURVE('',#52836,#52889,#52891,.T.); +#52889 = VERTEX_POINT('',#52890); +#52890 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#52891 = LINE('',#52892,#52893); +#52892 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#52893 = VECTOR('',#52894,1.); +#52894 = DIRECTION('',(-1.,-0.,-0.)); +#52895 = ORIENTED_EDGE('',*,*,#52896,.T.); +#52896 = EDGE_CURVE('',#52889,#52897,#52899,.T.); +#52897 = VERTEX_POINT('',#52898); +#52898 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#52899 = LINE('',#52900,#52901); +#52900 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#52901 = VECTOR('',#52902,1.); +#52902 = DIRECTION('',(0.,0.,1.)); +#52903 = ORIENTED_EDGE('',*,*,#52904,.F.); +#52904 = EDGE_CURVE('',#52828,#52897,#52905,.T.); +#52905 = LINE('',#52906,#52907); +#52906 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#52907 = VECTOR('',#52908,1.); +#52908 = DIRECTION('',(-1.,-0.,-0.)); +#52909 = ORIENTED_EDGE('',*,*,#52835,.F.); +#52910 = PLANE('',#52911); +#52911 = AXIS2_PLACEMENT_3D('',#52912,#52913,#52914); +#52912 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#52913 = DIRECTION('',(-0.,-1.,-0.)); +#52914 = DIRECTION('',(0.,0.,-1.)); +#52915 = ADVANCED_FACE('',(#52916),#52960,.F.); +#52916 = FACE_BOUND('',#52917,.T.); +#52917 = EDGE_LOOP('',(#52918,#52919,#52920,#52929,#52938,#52946,#52954) + ); +#52918 = ORIENTED_EDGE('',*,*,#52843,.F.); +#52919 = ORIENTED_EDGE('',*,*,#52857,.T.); +#52920 = ORIENTED_EDGE('',*,*,#52921,.F.); +#52921 = EDGE_CURVE('',#52922,#52858,#52924,.T.); +#52922 = VERTEX_POINT('',#52923); +#52923 = CARTESIAN_POINT('',(8.725,-8.71,0.)); +#52924 = CIRCLE('',#52925,0.275); +#52925 = AXIS2_PLACEMENT_3D('',#52926,#52927,#52928); +#52926 = CARTESIAN_POINT('',(9.,-8.71,0.)); +#52927 = DIRECTION('',(0.,0.,-1.)); +#52928 = DIRECTION('',(-1.,-0.,-0.)); +#52929 = ORIENTED_EDGE('',*,*,#52930,.F.); +#52930 = EDGE_CURVE('',#52931,#52922,#52933,.T.); +#52931 = VERTEX_POINT('',#52932); +#52932 = CARTESIAN_POINT('',(9.,-8.985,0.)); +#52933 = CIRCLE('',#52934,0.275); +#52934 = AXIS2_PLACEMENT_3D('',#52935,#52936,#52937); +#52935 = CARTESIAN_POINT('',(9.,-8.71,0.)); +#52936 = DIRECTION('',(0.,0.,-1.)); +#52937 = DIRECTION('',(-1.,-0.,-0.)); +#52938 = ORIENTED_EDGE('',*,*,#52939,.T.); +#52939 = EDGE_CURVE('',#52931,#52940,#52942,.T.); +#52940 = VERTEX_POINT('',#52941); +#52941 = CARTESIAN_POINT('',(9.,-9.16,0.)); +#52942 = LINE('',#52943,#52944); +#52943 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#52944 = VECTOR('',#52945,1.); +#52945 = DIRECTION('',(-0.,-1.,-0.)); +#52946 = ORIENTED_EDGE('',*,*,#52947,.F.); +#52947 = EDGE_CURVE('',#52948,#52940,#52950,.T.); +#52948 = VERTEX_POINT('',#52949); +#52949 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#52950 = LINE('',#52951,#52952); +#52951 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#52952 = VECTOR('',#52953,1.); +#52953 = DIRECTION('',(1.,0.,0.)); +#52954 = ORIENTED_EDGE('',*,*,#52955,.F.); +#52955 = EDGE_CURVE('',#52836,#52948,#52956,.T.); +#52956 = LINE('',#52957,#52958); +#52957 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#52958 = VECTOR('',#52959,1.); +#52959 = DIRECTION('',(-0.,-1.,-0.)); +#52960 = PLANE('',#52961); +#52961 = AXIS2_PLACEMENT_3D('',#52962,#52963,#52964); +#52962 = CARTESIAN_POINT('',(8.775,-8.71,0.)); +#52963 = DIRECTION('',(0.,0.,1.)); +#52964 = DIRECTION('',(1.,0.,-0.)); +#52965 = ADVANCED_FACE('',(#52966),#52991,.T.); +#52966 = FACE_BOUND('',#52967,.F.); +#52967 = EDGE_LOOP('',(#52968,#52976,#52984,#52990)); +#52968 = ORIENTED_EDGE('',*,*,#52969,.T.); +#52969 = EDGE_CURVE('',#52820,#52970,#52972,.T.); +#52970 = VERTEX_POINT('',#52971); +#52971 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#52972 = LINE('',#52973,#52974); +#52973 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#52974 = VECTOR('',#52975,1.); +#52975 = DIRECTION('',(0.,0.,1.)); +#52976 = ORIENTED_EDGE('',*,*,#52977,.T.); +#52977 = EDGE_CURVE('',#52970,#52978,#52980,.T.); +#52978 = VERTEX_POINT('',#52979); +#52979 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#52980 = LINE('',#52981,#52982); +#52981 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#52982 = VECTOR('',#52983,1.); +#52983 = DIRECTION('',(-1.,-0.,-0.)); +#52984 = ORIENTED_EDGE('',*,*,#52985,.F.); +#52985 = EDGE_CURVE('',#52828,#52978,#52986,.T.); +#52986 = LINE('',#52987,#52988); +#52987 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#52988 = VECTOR('',#52989,1.); +#52989 = DIRECTION('',(0.,0.,1.)); +#52990 = ORIENTED_EDGE('',*,*,#52827,.F.); +#52991 = PLANE('',#52992); +#52992 = AXIS2_PLACEMENT_3D('',#52993,#52994,#52995); +#52993 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#52994 = DIRECTION('',(0.,1.,0.)); +#52995 = DIRECTION('',(1.,0.,0.)); +#52996 = ADVANCED_FACE('',(#52997),#53024,.F.); +#52997 = FACE_BOUND('',#52998,.F.); +#52998 = EDGE_LOOP('',(#52999,#53007,#53008,#53009,#53017)); +#52999 = ORIENTED_EDGE('',*,*,#53000,.F.); +#53000 = EDGE_CURVE('',#52867,#53001,#53003,.T.); +#53001 = VERTEX_POINT('',#53002); +#53002 = CARTESIAN_POINT('',(9.,-8.435,0.8)); +#53003 = LINE('',#53004,#53005); +#53004 = CARTESIAN_POINT('',(9.,-8.435,0.8)); +#53005 = VECTOR('',#53006,1.); +#53006 = DIRECTION('',(0.,0.,1.)); +#53007 = ORIENTED_EDGE('',*,*,#52874,.F.); +#53008 = ORIENTED_EDGE('',*,*,#52921,.F.); +#53009 = ORIENTED_EDGE('',*,*,#53010,.F.); +#53010 = EDGE_CURVE('',#53011,#52922,#53013,.T.); +#53011 = VERTEX_POINT('',#53012); +#53012 = CARTESIAN_POINT('',(8.725,-8.71,0.8)); +#53013 = LINE('',#53014,#53015); +#53014 = CARTESIAN_POINT('',(8.725,-8.71,0.8)); +#53015 = VECTOR('',#53016,1.); +#53016 = DIRECTION('',(0.,0.,-1.)); +#53017 = ORIENTED_EDGE('',*,*,#53018,.T.); +#53018 = EDGE_CURVE('',#53011,#53001,#53019,.T.); +#53019 = CIRCLE('',#53020,0.275); +#53020 = AXIS2_PLACEMENT_3D('',#53021,#53022,#53023); +#53021 = CARTESIAN_POINT('',(9.,-8.71,0.8)); +#53022 = DIRECTION('',(0.,0.,-1.)); +#53023 = DIRECTION('',(-1.,-0.,-0.)); +#53024 = CYLINDRICAL_SURFACE('',#53025,0.275); +#53025 = AXIS2_PLACEMENT_3D('',#53026,#53027,#53028); +#53026 = CARTESIAN_POINT('',(9.,-8.71,0.8)); +#53027 = DIRECTION('',(0.,0.,1.)); +#53028 = DIRECTION('',(-1.,0.,0.)); +#53029 = ADVANCED_FACE('',(#53030),#53041,.F.); +#53030 = FACE_BOUND('',#53031,.T.); +#53031 = EDGE_LOOP('',(#53032,#53033,#53034,#53040)); +#53032 = ORIENTED_EDGE('',*,*,#52866,.F.); +#53033 = ORIENTED_EDGE('',*,*,#52969,.T.); +#53034 = ORIENTED_EDGE('',*,*,#53035,.T.); +#53035 = EDGE_CURVE('',#52970,#53001,#53036,.T.); +#53036 = LINE('',#53037,#53038); +#53037 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#53038 = VECTOR('',#53039,1.); +#53039 = DIRECTION('',(-0.,-1.,-0.)); +#53040 = ORIENTED_EDGE('',*,*,#53000,.F.); +#53041 = PLANE('',#53042); +#53042 = AXIS2_PLACEMENT_3D('',#53043,#53044,#53045); +#53043 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#53044 = DIRECTION('',(-1.,-0.,-0.)); +#53045 = DIRECTION('',(0.,1.,0.)); +#53046 = ADVANCED_FACE('',(#53047),#53065,.T.); +#53047 = FACE_BOUND('',#53048,.F.); +#53048 = EDGE_LOOP('',(#53049,#53050,#53058,#53064)); +#53049 = ORIENTED_EDGE('',*,*,#52888,.T.); +#53050 = ORIENTED_EDGE('',*,*,#53051,.T.); +#53051 = EDGE_CURVE('',#52889,#53052,#53054,.T.); +#53052 = VERTEX_POINT('',#53053); +#53053 = CARTESIAN_POINT('',(8.15,-9.16,0.)); +#53054 = LINE('',#53055,#53056); +#53055 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#53056 = VECTOR('',#53057,1.); +#53057 = DIRECTION('',(-0.,-1.,-0.)); +#53058 = ORIENTED_EDGE('',*,*,#53059,.F.); +#53059 = EDGE_CURVE('',#52948,#53052,#53060,.T.); +#53060 = LINE('',#53061,#53062); +#53061 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#53062 = VECTOR('',#53063,1.); +#53063 = DIRECTION('',(-1.,-0.,-0.)); +#53064 = ORIENTED_EDGE('',*,*,#52955,.F.); +#53065 = PLANE('',#53066); +#53066 = AXIS2_PLACEMENT_3D('',#53067,#53068,#53069); +#53067 = CARTESIAN_POINT('',(8.55,-8.26,0.)); +#53068 = DIRECTION('',(-0.,-0.,-1.)); +#53069 = DIRECTION('',(0.,1.,-0.)); +#53070 = ADVANCED_FACE('',(#53071),#53096,.F.); +#53071 = FACE_BOUND('',#53072,.T.); +#53072 = EDGE_LOOP('',(#53073,#53074,#53082,#53090)); +#53073 = ORIENTED_EDGE('',*,*,#52904,.T.); +#53074 = ORIENTED_EDGE('',*,*,#53075,.T.); +#53075 = EDGE_CURVE('',#52897,#53076,#53078,.T.); +#53076 = VERTEX_POINT('',#53077); +#53077 = CARTESIAN_POINT('',(8.15,-9.16,0.4)); +#53078 = LINE('',#53079,#53080); +#53079 = CARTESIAN_POINT('',(8.15,-8.26,0.4)); +#53080 = VECTOR('',#53081,1.); +#53081 = DIRECTION('',(-0.,-1.,-0.)); +#53082 = ORIENTED_EDGE('',*,*,#53083,.F.); +#53083 = EDGE_CURVE('',#53084,#53076,#53086,.T.); +#53084 = VERTEX_POINT('',#53085); +#53085 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#53086 = LINE('',#53087,#53088); +#53087 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#53088 = VECTOR('',#53089,1.); +#53089 = DIRECTION('',(-1.,-0.,-0.)); +#53090 = ORIENTED_EDGE('',*,*,#53091,.F.); +#53091 = EDGE_CURVE('',#52828,#53084,#53092,.T.); +#53092 = LINE('',#53093,#53094); +#53093 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#53094 = VECTOR('',#53095,1.); +#53095 = DIRECTION('',(-0.,-1.,-0.)); +#53096 = PLANE('',#53097); +#53097 = AXIS2_PLACEMENT_3D('',#53098,#53099,#53100); +#53098 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#53099 = DIRECTION('',(-0.,-0.,-1.)); +#53100 = DIRECTION('',(0.,1.,-0.)); +#53101 = ADVANCED_FACE('',(#53102),#53113,.T.); +#53102 = FACE_BOUND('',#53103,.F.); +#53103 = EDGE_LOOP('',(#53104,#53105,#53106,#53112)); +#53104 = ORIENTED_EDGE('',*,*,#52896,.T.); +#53105 = ORIENTED_EDGE('',*,*,#53075,.T.); +#53106 = ORIENTED_EDGE('',*,*,#53107,.F.); +#53107 = EDGE_CURVE('',#53052,#53076,#53108,.T.); +#53108 = LINE('',#53109,#53110); +#53109 = CARTESIAN_POINT('',(8.15,-9.16,0.)); +#53110 = VECTOR('',#53111,1.); +#53111 = DIRECTION('',(0.,0.,1.)); +#53112 = ORIENTED_EDGE('',*,*,#53051,.F.); +#53113 = PLANE('',#53114); +#53114 = AXIS2_PLACEMENT_3D('',#53115,#53116,#53117); +#53115 = CARTESIAN_POINT('',(8.15,-8.26,0.)); +#53116 = DIRECTION('',(-1.,-0.,-0.)); +#53117 = DIRECTION('',(0.,1.,0.)); +#53118 = ADVANCED_FACE('',(#53119),#53142,.T.); +#53119 = FACE_BOUND('',#53120,.F.); +#53120 = EDGE_LOOP('',(#53121,#53127,#53135,#53141)); +#53121 = ORIENTED_EDGE('',*,*,#53122,.T.); +#53122 = EDGE_CURVE('',#52948,#53084,#53123,.T.); +#53123 = LINE('',#53124,#53125); +#53124 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#53125 = VECTOR('',#53126,1.); +#53126 = DIRECTION('',(0.,0.,1.)); +#53127 = ORIENTED_EDGE('',*,*,#53128,.T.); +#53128 = EDGE_CURVE('',#53084,#53129,#53131,.T.); +#53129 = VERTEX_POINT('',#53130); +#53130 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#53131 = LINE('',#53132,#53133); +#53132 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#53133 = VECTOR('',#53134,1.); +#53134 = DIRECTION('',(1.,0.,0.)); +#53135 = ORIENTED_EDGE('',*,*,#53136,.F.); +#53136 = EDGE_CURVE('',#52940,#53129,#53137,.T.); +#53137 = LINE('',#53138,#53139); +#53138 = CARTESIAN_POINT('',(9.,-9.16,0.)); +#53139 = VECTOR('',#53140,1.); +#53140 = DIRECTION('',(0.,0.,1.)); +#53141 = ORIENTED_EDGE('',*,*,#52947,.F.); +#53142 = PLANE('',#53143); +#53143 = AXIS2_PLACEMENT_3D('',#53144,#53145,#53146); +#53144 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#53145 = DIRECTION('',(-0.,-1.,-0.)); +#53146 = DIRECTION('',(-1.,0.,0.)); +#53147 = ADVANCED_FACE('',(#53148),#53166,.F.); +#53148 = FACE_BOUND('',#53149,.T.); +#53149 = EDGE_LOOP('',(#53150,#53151,#53159,#53165)); +#53150 = ORIENTED_EDGE('',*,*,#52939,.F.); +#53151 = ORIENTED_EDGE('',*,*,#53152,.T.); +#53152 = EDGE_CURVE('',#52931,#53153,#53155,.T.); +#53153 = VERTEX_POINT('',#53154); +#53154 = CARTESIAN_POINT('',(9.,-8.985,0.4)); +#53155 = LINE('',#53156,#53157); +#53156 = CARTESIAN_POINT('',(9.,-8.985,0.8)); +#53157 = VECTOR('',#53158,1.); +#53158 = DIRECTION('',(0.,0.,1.)); +#53159 = ORIENTED_EDGE('',*,*,#53160,.T.); +#53160 = EDGE_CURVE('',#53153,#53129,#53161,.T.); +#53161 = LINE('',#53162,#53163); +#53162 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#53163 = VECTOR('',#53164,1.); +#53164 = DIRECTION('',(-0.,-1.,-0.)); +#53165 = ORIENTED_EDGE('',*,*,#53136,.F.); +#53166 = PLANE('',#53167); +#53167 = AXIS2_PLACEMENT_3D('',#53168,#53169,#53170); +#53168 = CARTESIAN_POINT('',(9.,-8.26,0.)); +#53169 = DIRECTION('',(-1.,-0.,-0.)); +#53170 = DIRECTION('',(0.,1.,0.)); +#53171 = ADVANCED_FACE('',(#53172),#53192,.F.); +#53172 = FACE_BOUND('',#53173,.F.); +#53173 = EDGE_LOOP('',(#53174,#53175,#53176,#53184,#53191)); +#53174 = ORIENTED_EDGE('',*,*,#52930,.F.); +#53175 = ORIENTED_EDGE('',*,*,#53152,.T.); +#53176 = ORIENTED_EDGE('',*,*,#53177,.T.); +#53177 = EDGE_CURVE('',#53153,#53178,#53180,.T.); +#53178 = VERTEX_POINT('',#53179); +#53179 = CARTESIAN_POINT('',(9.,-8.985,0.8)); +#53180 = LINE('',#53181,#53182); +#53181 = CARTESIAN_POINT('',(9.,-8.985,0.8)); +#53182 = VECTOR('',#53183,1.); +#53183 = DIRECTION('',(0.,0.,1.)); +#53184 = ORIENTED_EDGE('',*,*,#53185,.T.); +#53185 = EDGE_CURVE('',#53178,#53011,#53186,.T.); +#53186 = CIRCLE('',#53187,0.275); +#53187 = AXIS2_PLACEMENT_3D('',#53188,#53189,#53190); +#53188 = CARTESIAN_POINT('',(9.,-8.71,0.8)); +#53189 = DIRECTION('',(0.,0.,-1.)); +#53190 = DIRECTION('',(-1.,-0.,-0.)); +#53191 = ORIENTED_EDGE('',*,*,#53010,.T.); +#53192 = CYLINDRICAL_SURFACE('',#53193,0.275); +#53193 = AXIS2_PLACEMENT_3D('',#53194,#53195,#53196); +#53194 = CARTESIAN_POINT('',(9.,-8.71,0.8)); +#53195 = DIRECTION('',(0.,0.,1.)); +#53196 = DIRECTION('',(-1.,0.,0.)); +#53197 = ADVANCED_FACE('',(#53198),#53216,.T.); +#53198 = FACE_BOUND('',#53199,.F.); +#53199 = EDGE_LOOP('',(#53200,#53201,#53209,#53215)); +#53200 = ORIENTED_EDGE('',*,*,#52985,.T.); +#53201 = ORIENTED_EDGE('',*,*,#53202,.T.); +#53202 = EDGE_CURVE('',#52978,#53203,#53205,.T.); +#53203 = VERTEX_POINT('',#53204); +#53204 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#53205 = LINE('',#53206,#53207); +#53206 = CARTESIAN_POINT('',(8.55,-8.26,0.8)); +#53207 = VECTOR('',#53208,1.); +#53208 = DIRECTION('',(-0.,-1.,-0.)); +#53209 = ORIENTED_EDGE('',*,*,#53210,.F.); +#53210 = EDGE_CURVE('',#53084,#53203,#53211,.T.); +#53211 = LINE('',#53212,#53213); +#53212 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#53213 = VECTOR('',#53214,1.); +#53214 = DIRECTION('',(0.,0.,1.)); +#53215 = ORIENTED_EDGE('',*,*,#53091,.F.); +#53216 = PLANE('',#53217); +#53217 = AXIS2_PLACEMENT_3D('',#53218,#53219,#53220); +#53218 = CARTESIAN_POINT('',(8.55,-8.26,0.4)); +#53219 = DIRECTION('',(-1.,-0.,-0.)); +#53220 = DIRECTION('',(0.,1.,0.)); +#53221 = ADVANCED_FACE('',(#53222),#53243,.T.); +#53222 = FACE_BOUND('',#53223,.F.); +#53223 = EDGE_LOOP('',(#53224,#53225,#53226,#53227,#53228,#53236,#53242) + ); +#53224 = ORIENTED_EDGE('',*,*,#52977,.F.); +#53225 = ORIENTED_EDGE('',*,*,#53035,.T.); +#53226 = ORIENTED_EDGE('',*,*,#53018,.F.); +#53227 = ORIENTED_EDGE('',*,*,#53185,.F.); +#53228 = ORIENTED_EDGE('',*,*,#53229,.T.); +#53229 = EDGE_CURVE('',#53178,#53230,#53232,.T.); +#53230 = VERTEX_POINT('',#53231); +#53231 = CARTESIAN_POINT('',(9.,-9.16,0.8)); +#53232 = LINE('',#53233,#53234); +#53233 = CARTESIAN_POINT('',(9.,-8.26,0.8)); +#53234 = VECTOR('',#53235,1.); +#53235 = DIRECTION('',(-0.,-1.,-0.)); +#53236 = ORIENTED_EDGE('',*,*,#53237,.F.); +#53237 = EDGE_CURVE('',#53203,#53230,#53238,.T.); +#53238 = LINE('',#53239,#53240); +#53239 = CARTESIAN_POINT('',(8.55,-9.16,0.8)); +#53240 = VECTOR('',#53241,1.); +#53241 = DIRECTION('',(1.,0.,0.)); +#53242 = ORIENTED_EDGE('',*,*,#53202,.F.); +#53243 = PLANE('',#53244); +#53244 = AXIS2_PLACEMENT_3D('',#53245,#53246,#53247); +#53245 = CARTESIAN_POINT('',(8.775,-8.71,0.8)); +#53246 = DIRECTION('',(0.,0.,1.)); +#53247 = DIRECTION('',(1.,0.,-0.)); +#53248 = ADVANCED_FACE('',(#53249),#53255,.T.); +#53249 = FACE_BOUND('',#53250,.F.); +#53250 = EDGE_LOOP('',(#53251,#53252,#53253,#53254)); +#53251 = ORIENTED_EDGE('',*,*,#53059,.T.); +#53252 = ORIENTED_EDGE('',*,*,#53107,.T.); +#53253 = ORIENTED_EDGE('',*,*,#53083,.F.); +#53254 = ORIENTED_EDGE('',*,*,#53122,.F.); +#53255 = PLANE('',#53256); +#53256 = AXIS2_PLACEMENT_3D('',#53257,#53258,#53259); +#53257 = CARTESIAN_POINT('',(8.55,-9.16,0.)); +#53258 = DIRECTION('',(-0.,-1.,-0.)); +#53259 = DIRECTION('',(0.,0.,-1.)); +#53260 = ADVANCED_FACE('',(#53261),#53272,.T.); +#53261 = FACE_BOUND('',#53262,.F.); +#53262 = EDGE_LOOP('',(#53263,#53264,#53265,#53271)); +#53263 = ORIENTED_EDGE('',*,*,#53210,.T.); +#53264 = ORIENTED_EDGE('',*,*,#53237,.T.); +#53265 = ORIENTED_EDGE('',*,*,#53266,.F.); +#53266 = EDGE_CURVE('',#53129,#53230,#53267,.T.); +#53267 = LINE('',#53268,#53269); +#53268 = CARTESIAN_POINT('',(9.,-9.16,0.4)); +#53269 = VECTOR('',#53270,1.); +#53270 = DIRECTION('',(0.,0.,1.)); +#53271 = ORIENTED_EDGE('',*,*,#53128,.F.); +#53272 = PLANE('',#53273); +#53273 = AXIS2_PLACEMENT_3D('',#53274,#53275,#53276); +#53274 = CARTESIAN_POINT('',(8.55,-9.16,0.4)); +#53275 = DIRECTION('',(-0.,-1.,-0.)); +#53276 = DIRECTION('',(-1.,0.,0.)); +#53277 = ADVANCED_FACE('',(#53278),#53284,.F.); +#53278 = FACE_BOUND('',#53279,.T.); +#53279 = EDGE_LOOP('',(#53280,#53281,#53282,#53283)); +#53280 = ORIENTED_EDGE('',*,*,#53160,.F.); +#53281 = ORIENTED_EDGE('',*,*,#53177,.T.); +#53282 = ORIENTED_EDGE('',*,*,#53229,.T.); +#53283 = ORIENTED_EDGE('',*,*,#53266,.F.); +#53284 = PLANE('',#53285); +#53285 = AXIS2_PLACEMENT_3D('',#53286,#53287,#53288); +#53286 = CARTESIAN_POINT('',(9.,-8.26,0.4)); +#53287 = DIRECTION('',(-1.,-0.,-0.)); +#53288 = DIRECTION('',(0.,1.,0.)); +#53289 = MANIFOLD_SOLID_BREP('',#53290); +#53290 = CLOSED_SHELL('',(#53291,#53331,#53362,#53393,#53443,#53474, + #53507,#53524,#53548,#53579,#53596,#53625,#53649,#53675,#53699, + #53726,#53738,#53755)); +#53291 = ADVANCED_FACE('',(#53292),#53326,.T.); +#53292 = FACE_BOUND('',#53293,.F.); +#53293 = EDGE_LOOP('',(#53294,#53304,#53312,#53320)); +#53294 = ORIENTED_EDGE('',*,*,#53295,.T.); +#53295 = EDGE_CURVE('',#53296,#53298,#53300,.T.); +#53296 = VERTEX_POINT('',#53297); +#53297 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53298 = VERTEX_POINT('',#53299); +#53299 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53300 = LINE('',#53301,#53302); +#53301 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53302 = VECTOR('',#53303,1.); +#53303 = DIRECTION('',(0.,0.,1.)); +#53304 = ORIENTED_EDGE('',*,*,#53305,.T.); +#53305 = EDGE_CURVE('',#53298,#53306,#53308,.T.); +#53306 = VERTEX_POINT('',#53307); +#53307 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53308 = LINE('',#53309,#53310); +#53309 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53310 = VECTOR('',#53311,1.); +#53311 = DIRECTION('',(-1.,-0.,-0.)); +#53312 = ORIENTED_EDGE('',*,*,#53313,.F.); +#53313 = EDGE_CURVE('',#53314,#53306,#53316,.T.); +#53314 = VERTEX_POINT('',#53315); +#53315 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53316 = LINE('',#53317,#53318); +#53317 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53318 = VECTOR('',#53319,1.); +#53319 = DIRECTION('',(0.,0.,1.)); +#53320 = ORIENTED_EDGE('',*,*,#53321,.F.); +#53321 = EDGE_CURVE('',#53296,#53314,#53322,.T.); +#53322 = LINE('',#53323,#53324); +#53323 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53324 = VECTOR('',#53325,1.); +#53325 = DIRECTION('',(-1.,-0.,-0.)); +#53326 = PLANE('',#53327); +#53327 = AXIS2_PLACEMENT_3D('',#53328,#53329,#53330); +#53328 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53329 = DIRECTION('',(0.,1.,0.)); +#53330 = DIRECTION('',(1.,0.,0.)); +#53331 = ADVANCED_FACE('',(#53332),#53357,.F.); +#53332 = FACE_BOUND('',#53333,.T.); +#53333 = EDGE_LOOP('',(#53334,#53342,#53343,#53351)); +#53334 = ORIENTED_EDGE('',*,*,#53335,.F.); +#53335 = EDGE_CURVE('',#53296,#53336,#53338,.T.); +#53336 = VERTEX_POINT('',#53337); +#53337 = CARTESIAN_POINT('',(9.,-9.705,0.)); +#53338 = LINE('',#53339,#53340); +#53339 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53340 = VECTOR('',#53341,1.); +#53341 = DIRECTION('',(-0.,-1.,-0.)); +#53342 = ORIENTED_EDGE('',*,*,#53295,.T.); +#53343 = ORIENTED_EDGE('',*,*,#53344,.T.); +#53344 = EDGE_CURVE('',#53298,#53345,#53347,.T.); +#53345 = VERTEX_POINT('',#53346); +#53346 = CARTESIAN_POINT('',(9.,-9.705,0.4)); +#53347 = LINE('',#53348,#53349); +#53348 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53349 = VECTOR('',#53350,1.); +#53350 = DIRECTION('',(-0.,-1.,-0.)); +#53351 = ORIENTED_EDGE('',*,*,#53352,.F.); +#53352 = EDGE_CURVE('',#53336,#53345,#53353,.T.); +#53353 = LINE('',#53354,#53355); +#53354 = CARTESIAN_POINT('',(9.,-9.705,0.8)); +#53355 = VECTOR('',#53356,1.); +#53356 = DIRECTION('',(0.,0.,1.)); +#53357 = PLANE('',#53358); +#53358 = AXIS2_PLACEMENT_3D('',#53359,#53360,#53361); +#53359 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53360 = DIRECTION('',(-1.,-0.,-0.)); +#53361 = DIRECTION('',(0.,1.,0.)); +#53362 = ADVANCED_FACE('',(#53363),#53388,.F.); +#53363 = FACE_BOUND('',#53364,.T.); +#53364 = EDGE_LOOP('',(#53365,#53373,#53381,#53387)); +#53365 = ORIENTED_EDGE('',*,*,#53366,.T.); +#53366 = EDGE_CURVE('',#53314,#53367,#53369,.T.); +#53367 = VERTEX_POINT('',#53368); +#53368 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#53369 = LINE('',#53370,#53371); +#53370 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53371 = VECTOR('',#53372,1.); +#53372 = DIRECTION('',(-1.,-0.,-0.)); +#53373 = ORIENTED_EDGE('',*,*,#53374,.T.); +#53374 = EDGE_CURVE('',#53367,#53375,#53377,.T.); +#53375 = VERTEX_POINT('',#53376); +#53376 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#53377 = LINE('',#53378,#53379); +#53378 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#53379 = VECTOR('',#53380,1.); +#53380 = DIRECTION('',(0.,0.,1.)); +#53381 = ORIENTED_EDGE('',*,*,#53382,.F.); +#53382 = EDGE_CURVE('',#53306,#53375,#53383,.T.); +#53383 = LINE('',#53384,#53385); +#53384 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53385 = VECTOR('',#53386,1.); +#53386 = DIRECTION('',(-1.,-0.,-0.)); +#53387 = ORIENTED_EDGE('',*,*,#53313,.F.); +#53388 = PLANE('',#53389); +#53389 = AXIS2_PLACEMENT_3D('',#53390,#53391,#53392); +#53390 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53391 = DIRECTION('',(-0.,-1.,-0.)); +#53392 = DIRECTION('',(0.,0.,-1.)); +#53393 = ADVANCED_FACE('',(#53394),#53438,.F.); +#53394 = FACE_BOUND('',#53395,.T.); +#53395 = EDGE_LOOP('',(#53396,#53397,#53398,#53407,#53416,#53424,#53432) + ); +#53396 = ORIENTED_EDGE('',*,*,#53321,.F.); +#53397 = ORIENTED_EDGE('',*,*,#53335,.T.); +#53398 = ORIENTED_EDGE('',*,*,#53399,.F.); +#53399 = EDGE_CURVE('',#53400,#53336,#53402,.T.); +#53400 = VERTEX_POINT('',#53401); +#53401 = CARTESIAN_POINT('',(8.725,-9.98,0.)); +#53402 = CIRCLE('',#53403,0.275); +#53403 = AXIS2_PLACEMENT_3D('',#53404,#53405,#53406); +#53404 = CARTESIAN_POINT('',(9.,-9.98,0.)); +#53405 = DIRECTION('',(0.,0.,-1.)); +#53406 = DIRECTION('',(-1.,-0.,-0.)); +#53407 = ORIENTED_EDGE('',*,*,#53408,.F.); +#53408 = EDGE_CURVE('',#53409,#53400,#53411,.T.); +#53409 = VERTEX_POINT('',#53410); +#53410 = CARTESIAN_POINT('',(9.,-10.255,0.)); +#53411 = CIRCLE('',#53412,0.275); +#53412 = AXIS2_PLACEMENT_3D('',#53413,#53414,#53415); +#53413 = CARTESIAN_POINT('',(9.,-9.98,0.)); +#53414 = DIRECTION('',(0.,0.,-1.)); +#53415 = DIRECTION('',(-1.,-0.,-0.)); +#53416 = ORIENTED_EDGE('',*,*,#53417,.T.); +#53417 = EDGE_CURVE('',#53409,#53418,#53420,.T.); +#53418 = VERTEX_POINT('',#53419); +#53419 = CARTESIAN_POINT('',(9.,-10.43,0.)); +#53420 = LINE('',#53421,#53422); +#53421 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53422 = VECTOR('',#53423,1.); +#53423 = DIRECTION('',(-0.,-1.,-0.)); +#53424 = ORIENTED_EDGE('',*,*,#53425,.F.); +#53425 = EDGE_CURVE('',#53426,#53418,#53428,.T.); +#53426 = VERTEX_POINT('',#53427); +#53427 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53428 = LINE('',#53429,#53430); +#53429 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53430 = VECTOR('',#53431,1.); +#53431 = DIRECTION('',(1.,0.,0.)); +#53432 = ORIENTED_EDGE('',*,*,#53433,.F.); +#53433 = EDGE_CURVE('',#53314,#53426,#53434,.T.); +#53434 = LINE('',#53435,#53436); +#53435 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53436 = VECTOR('',#53437,1.); +#53437 = DIRECTION('',(-0.,-1.,-0.)); +#53438 = PLANE('',#53439); +#53439 = AXIS2_PLACEMENT_3D('',#53440,#53441,#53442); +#53440 = CARTESIAN_POINT('',(8.775,-9.98,0.)); +#53441 = DIRECTION('',(0.,0.,1.)); +#53442 = DIRECTION('',(1.,0.,-0.)); +#53443 = ADVANCED_FACE('',(#53444),#53469,.T.); +#53444 = FACE_BOUND('',#53445,.F.); +#53445 = EDGE_LOOP('',(#53446,#53454,#53462,#53468)); +#53446 = ORIENTED_EDGE('',*,*,#53447,.T.); +#53447 = EDGE_CURVE('',#53298,#53448,#53450,.T.); +#53448 = VERTEX_POINT('',#53449); +#53449 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#53450 = LINE('',#53451,#53452); +#53451 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53452 = VECTOR('',#53453,1.); +#53453 = DIRECTION('',(0.,0.,1.)); +#53454 = ORIENTED_EDGE('',*,*,#53455,.T.); +#53455 = EDGE_CURVE('',#53448,#53456,#53458,.T.); +#53456 = VERTEX_POINT('',#53457); +#53457 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#53458 = LINE('',#53459,#53460); +#53459 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#53460 = VECTOR('',#53461,1.); +#53461 = DIRECTION('',(-1.,-0.,-0.)); +#53462 = ORIENTED_EDGE('',*,*,#53463,.F.); +#53463 = EDGE_CURVE('',#53306,#53456,#53464,.T.); +#53464 = LINE('',#53465,#53466); +#53465 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53466 = VECTOR('',#53467,1.); +#53467 = DIRECTION('',(0.,0.,1.)); +#53468 = ORIENTED_EDGE('',*,*,#53305,.F.); +#53469 = PLANE('',#53470); +#53470 = AXIS2_PLACEMENT_3D('',#53471,#53472,#53473); +#53471 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53472 = DIRECTION('',(0.,1.,0.)); +#53473 = DIRECTION('',(1.,0.,0.)); +#53474 = ADVANCED_FACE('',(#53475),#53502,.F.); +#53475 = FACE_BOUND('',#53476,.F.); +#53476 = EDGE_LOOP('',(#53477,#53485,#53486,#53487,#53495)); +#53477 = ORIENTED_EDGE('',*,*,#53478,.F.); +#53478 = EDGE_CURVE('',#53345,#53479,#53481,.T.); +#53479 = VERTEX_POINT('',#53480); +#53480 = CARTESIAN_POINT('',(9.,-9.705,0.8)); +#53481 = LINE('',#53482,#53483); +#53482 = CARTESIAN_POINT('',(9.,-9.705,0.8)); +#53483 = VECTOR('',#53484,1.); +#53484 = DIRECTION('',(0.,0.,1.)); +#53485 = ORIENTED_EDGE('',*,*,#53352,.F.); +#53486 = ORIENTED_EDGE('',*,*,#53399,.F.); +#53487 = ORIENTED_EDGE('',*,*,#53488,.F.); +#53488 = EDGE_CURVE('',#53489,#53400,#53491,.T.); +#53489 = VERTEX_POINT('',#53490); +#53490 = CARTESIAN_POINT('',(8.725,-9.98,0.8)); +#53491 = LINE('',#53492,#53493); +#53492 = CARTESIAN_POINT('',(8.725,-9.98,0.8)); +#53493 = VECTOR('',#53494,1.); +#53494 = DIRECTION('',(0.,0.,-1.)); +#53495 = ORIENTED_EDGE('',*,*,#53496,.T.); +#53496 = EDGE_CURVE('',#53489,#53479,#53497,.T.); +#53497 = CIRCLE('',#53498,0.275); +#53498 = AXIS2_PLACEMENT_3D('',#53499,#53500,#53501); +#53499 = CARTESIAN_POINT('',(9.,-9.98,0.8)); +#53500 = DIRECTION('',(0.,0.,-1.)); +#53501 = DIRECTION('',(-1.,-0.,-0.)); +#53502 = CYLINDRICAL_SURFACE('',#53503,0.275); +#53503 = AXIS2_PLACEMENT_3D('',#53504,#53505,#53506); +#53504 = CARTESIAN_POINT('',(9.,-9.98,0.8)); +#53505 = DIRECTION('',(0.,0.,1.)); +#53506 = DIRECTION('',(-1.,0.,0.)); +#53507 = ADVANCED_FACE('',(#53508),#53519,.F.); +#53508 = FACE_BOUND('',#53509,.T.); +#53509 = EDGE_LOOP('',(#53510,#53511,#53512,#53518)); +#53510 = ORIENTED_EDGE('',*,*,#53344,.F.); +#53511 = ORIENTED_EDGE('',*,*,#53447,.T.); +#53512 = ORIENTED_EDGE('',*,*,#53513,.T.); +#53513 = EDGE_CURVE('',#53448,#53479,#53514,.T.); +#53514 = LINE('',#53515,#53516); +#53515 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#53516 = VECTOR('',#53517,1.); +#53517 = DIRECTION('',(-0.,-1.,-0.)); +#53518 = ORIENTED_EDGE('',*,*,#53478,.F.); +#53519 = PLANE('',#53520); +#53520 = AXIS2_PLACEMENT_3D('',#53521,#53522,#53523); +#53521 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53522 = DIRECTION('',(-1.,-0.,-0.)); +#53523 = DIRECTION('',(0.,1.,0.)); +#53524 = ADVANCED_FACE('',(#53525),#53543,.T.); +#53525 = FACE_BOUND('',#53526,.F.); +#53526 = EDGE_LOOP('',(#53527,#53528,#53536,#53542)); +#53527 = ORIENTED_EDGE('',*,*,#53366,.T.); +#53528 = ORIENTED_EDGE('',*,*,#53529,.T.); +#53529 = EDGE_CURVE('',#53367,#53530,#53532,.T.); +#53530 = VERTEX_POINT('',#53531); +#53531 = CARTESIAN_POINT('',(8.15,-10.43,0.)); +#53532 = LINE('',#53533,#53534); +#53533 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#53534 = VECTOR('',#53535,1.); +#53535 = DIRECTION('',(-0.,-1.,-0.)); +#53536 = ORIENTED_EDGE('',*,*,#53537,.F.); +#53537 = EDGE_CURVE('',#53426,#53530,#53538,.T.); +#53538 = LINE('',#53539,#53540); +#53539 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53540 = VECTOR('',#53541,1.); +#53541 = DIRECTION('',(-1.,-0.,-0.)); +#53542 = ORIENTED_EDGE('',*,*,#53433,.F.); +#53543 = PLANE('',#53544); +#53544 = AXIS2_PLACEMENT_3D('',#53545,#53546,#53547); +#53545 = CARTESIAN_POINT('',(8.55,-9.53,0.)); +#53546 = DIRECTION('',(-0.,-0.,-1.)); +#53547 = DIRECTION('',(0.,1.,-0.)); +#53548 = ADVANCED_FACE('',(#53549),#53574,.F.); +#53549 = FACE_BOUND('',#53550,.T.); +#53550 = EDGE_LOOP('',(#53551,#53552,#53560,#53568)); +#53551 = ORIENTED_EDGE('',*,*,#53382,.T.); +#53552 = ORIENTED_EDGE('',*,*,#53553,.T.); +#53553 = EDGE_CURVE('',#53375,#53554,#53556,.T.); +#53554 = VERTEX_POINT('',#53555); +#53555 = CARTESIAN_POINT('',(8.15,-10.43,0.4)); +#53556 = LINE('',#53557,#53558); +#53557 = CARTESIAN_POINT('',(8.15,-9.53,0.4)); +#53558 = VECTOR('',#53559,1.); +#53559 = DIRECTION('',(-0.,-1.,-0.)); +#53560 = ORIENTED_EDGE('',*,*,#53561,.F.); +#53561 = EDGE_CURVE('',#53562,#53554,#53564,.T.); +#53562 = VERTEX_POINT('',#53563); +#53563 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#53564 = LINE('',#53565,#53566); +#53565 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#53566 = VECTOR('',#53567,1.); +#53567 = DIRECTION('',(-1.,-0.,-0.)); +#53568 = ORIENTED_EDGE('',*,*,#53569,.F.); +#53569 = EDGE_CURVE('',#53306,#53562,#53570,.T.); +#53570 = LINE('',#53571,#53572); +#53571 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53572 = VECTOR('',#53573,1.); +#53573 = DIRECTION('',(-0.,-1.,-0.)); +#53574 = PLANE('',#53575); +#53575 = AXIS2_PLACEMENT_3D('',#53576,#53577,#53578); +#53576 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53577 = DIRECTION('',(-0.,-0.,-1.)); +#53578 = DIRECTION('',(0.,1.,-0.)); +#53579 = ADVANCED_FACE('',(#53580),#53591,.T.); +#53580 = FACE_BOUND('',#53581,.F.); +#53581 = EDGE_LOOP('',(#53582,#53583,#53584,#53590)); +#53582 = ORIENTED_EDGE('',*,*,#53374,.T.); +#53583 = ORIENTED_EDGE('',*,*,#53553,.T.); +#53584 = ORIENTED_EDGE('',*,*,#53585,.F.); +#53585 = EDGE_CURVE('',#53530,#53554,#53586,.T.); +#53586 = LINE('',#53587,#53588); +#53587 = CARTESIAN_POINT('',(8.15,-10.43,0.)); +#53588 = VECTOR('',#53589,1.); +#53589 = DIRECTION('',(0.,0.,1.)); +#53590 = ORIENTED_EDGE('',*,*,#53529,.F.); +#53591 = PLANE('',#53592); +#53592 = AXIS2_PLACEMENT_3D('',#53593,#53594,#53595); +#53593 = CARTESIAN_POINT('',(8.15,-9.53,0.)); +#53594 = DIRECTION('',(-1.,-0.,-0.)); +#53595 = DIRECTION('',(0.,1.,0.)); +#53596 = ADVANCED_FACE('',(#53597),#53620,.T.); +#53597 = FACE_BOUND('',#53598,.F.); +#53598 = EDGE_LOOP('',(#53599,#53605,#53613,#53619)); +#53599 = ORIENTED_EDGE('',*,*,#53600,.T.); +#53600 = EDGE_CURVE('',#53426,#53562,#53601,.T.); +#53601 = LINE('',#53602,#53603); +#53602 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53603 = VECTOR('',#53604,1.); +#53604 = DIRECTION('',(0.,0.,1.)); +#53605 = ORIENTED_EDGE('',*,*,#53606,.T.); +#53606 = EDGE_CURVE('',#53562,#53607,#53609,.T.); +#53607 = VERTEX_POINT('',#53608); +#53608 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#53609 = LINE('',#53610,#53611); +#53610 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#53611 = VECTOR('',#53612,1.); +#53612 = DIRECTION('',(1.,0.,0.)); +#53613 = ORIENTED_EDGE('',*,*,#53614,.F.); +#53614 = EDGE_CURVE('',#53418,#53607,#53615,.T.); +#53615 = LINE('',#53616,#53617); +#53616 = CARTESIAN_POINT('',(9.,-10.43,0.)); +#53617 = VECTOR('',#53618,1.); +#53618 = DIRECTION('',(0.,0.,1.)); +#53619 = ORIENTED_EDGE('',*,*,#53425,.F.); +#53620 = PLANE('',#53621); +#53621 = AXIS2_PLACEMENT_3D('',#53622,#53623,#53624); +#53622 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53623 = DIRECTION('',(-0.,-1.,-0.)); +#53624 = DIRECTION('',(-1.,0.,0.)); +#53625 = ADVANCED_FACE('',(#53626),#53644,.F.); +#53626 = FACE_BOUND('',#53627,.T.); +#53627 = EDGE_LOOP('',(#53628,#53629,#53637,#53643)); +#53628 = ORIENTED_EDGE('',*,*,#53417,.F.); +#53629 = ORIENTED_EDGE('',*,*,#53630,.T.); +#53630 = EDGE_CURVE('',#53409,#53631,#53633,.T.); +#53631 = VERTEX_POINT('',#53632); +#53632 = CARTESIAN_POINT('',(9.,-10.255,0.4)); +#53633 = LINE('',#53634,#53635); +#53634 = CARTESIAN_POINT('',(9.,-10.255,0.8)); +#53635 = VECTOR('',#53636,1.); +#53636 = DIRECTION('',(0.,0.,1.)); +#53637 = ORIENTED_EDGE('',*,*,#53638,.T.); +#53638 = EDGE_CURVE('',#53631,#53607,#53639,.T.); +#53639 = LINE('',#53640,#53641); +#53640 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53641 = VECTOR('',#53642,1.); +#53642 = DIRECTION('',(-0.,-1.,-0.)); +#53643 = ORIENTED_EDGE('',*,*,#53614,.F.); +#53644 = PLANE('',#53645); +#53645 = AXIS2_PLACEMENT_3D('',#53646,#53647,#53648); +#53646 = CARTESIAN_POINT('',(9.,-9.53,0.)); +#53647 = DIRECTION('',(-1.,-0.,-0.)); +#53648 = DIRECTION('',(0.,1.,0.)); +#53649 = ADVANCED_FACE('',(#53650),#53670,.F.); +#53650 = FACE_BOUND('',#53651,.F.); +#53651 = EDGE_LOOP('',(#53652,#53653,#53654,#53662,#53669)); +#53652 = ORIENTED_EDGE('',*,*,#53408,.F.); +#53653 = ORIENTED_EDGE('',*,*,#53630,.T.); +#53654 = ORIENTED_EDGE('',*,*,#53655,.T.); +#53655 = EDGE_CURVE('',#53631,#53656,#53658,.T.); +#53656 = VERTEX_POINT('',#53657); +#53657 = CARTESIAN_POINT('',(9.,-10.255,0.8)); +#53658 = LINE('',#53659,#53660); +#53659 = CARTESIAN_POINT('',(9.,-10.255,0.8)); +#53660 = VECTOR('',#53661,1.); +#53661 = DIRECTION('',(0.,0.,1.)); +#53662 = ORIENTED_EDGE('',*,*,#53663,.T.); +#53663 = EDGE_CURVE('',#53656,#53489,#53664,.T.); +#53664 = CIRCLE('',#53665,0.275); +#53665 = AXIS2_PLACEMENT_3D('',#53666,#53667,#53668); +#53666 = CARTESIAN_POINT('',(9.,-9.98,0.8)); +#53667 = DIRECTION('',(0.,0.,-1.)); +#53668 = DIRECTION('',(-1.,-0.,-0.)); +#53669 = ORIENTED_EDGE('',*,*,#53488,.T.); +#53670 = CYLINDRICAL_SURFACE('',#53671,0.275); +#53671 = AXIS2_PLACEMENT_3D('',#53672,#53673,#53674); +#53672 = CARTESIAN_POINT('',(9.,-9.98,0.8)); +#53673 = DIRECTION('',(0.,0.,1.)); +#53674 = DIRECTION('',(-1.,0.,0.)); +#53675 = ADVANCED_FACE('',(#53676),#53694,.T.); +#53676 = FACE_BOUND('',#53677,.F.); +#53677 = EDGE_LOOP('',(#53678,#53679,#53687,#53693)); +#53678 = ORIENTED_EDGE('',*,*,#53463,.T.); +#53679 = ORIENTED_EDGE('',*,*,#53680,.T.); +#53680 = EDGE_CURVE('',#53456,#53681,#53683,.T.); +#53681 = VERTEX_POINT('',#53682); +#53682 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#53683 = LINE('',#53684,#53685); +#53684 = CARTESIAN_POINT('',(8.55,-9.53,0.8)); +#53685 = VECTOR('',#53686,1.); +#53686 = DIRECTION('',(-0.,-1.,-0.)); +#53687 = ORIENTED_EDGE('',*,*,#53688,.F.); +#53688 = EDGE_CURVE('',#53562,#53681,#53689,.T.); +#53689 = LINE('',#53690,#53691); +#53690 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#53691 = VECTOR('',#53692,1.); +#53692 = DIRECTION('',(0.,0.,1.)); +#53693 = ORIENTED_EDGE('',*,*,#53569,.F.); +#53694 = PLANE('',#53695); +#53695 = AXIS2_PLACEMENT_3D('',#53696,#53697,#53698); +#53696 = CARTESIAN_POINT('',(8.55,-9.53,0.4)); +#53697 = DIRECTION('',(-1.,-0.,-0.)); +#53698 = DIRECTION('',(0.,1.,0.)); +#53699 = ADVANCED_FACE('',(#53700),#53721,.T.); +#53700 = FACE_BOUND('',#53701,.F.); +#53701 = EDGE_LOOP('',(#53702,#53703,#53704,#53705,#53706,#53714,#53720) + ); +#53702 = ORIENTED_EDGE('',*,*,#53455,.F.); +#53703 = ORIENTED_EDGE('',*,*,#53513,.T.); +#53704 = ORIENTED_EDGE('',*,*,#53496,.F.); +#53705 = ORIENTED_EDGE('',*,*,#53663,.F.); +#53706 = ORIENTED_EDGE('',*,*,#53707,.T.); +#53707 = EDGE_CURVE('',#53656,#53708,#53710,.T.); +#53708 = VERTEX_POINT('',#53709); +#53709 = CARTESIAN_POINT('',(9.,-10.43,0.8)); +#53710 = LINE('',#53711,#53712); +#53711 = CARTESIAN_POINT('',(9.,-9.53,0.8)); +#53712 = VECTOR('',#53713,1.); +#53713 = DIRECTION('',(-0.,-1.,-0.)); +#53714 = ORIENTED_EDGE('',*,*,#53715,.F.); +#53715 = EDGE_CURVE('',#53681,#53708,#53716,.T.); +#53716 = LINE('',#53717,#53718); +#53717 = CARTESIAN_POINT('',(8.55,-10.43,0.8)); +#53718 = VECTOR('',#53719,1.); +#53719 = DIRECTION('',(1.,0.,0.)); +#53720 = ORIENTED_EDGE('',*,*,#53680,.F.); +#53721 = PLANE('',#53722); +#53722 = AXIS2_PLACEMENT_3D('',#53723,#53724,#53725); +#53723 = CARTESIAN_POINT('',(8.775,-9.98,0.8)); +#53724 = DIRECTION('',(0.,0.,1.)); +#53725 = DIRECTION('',(1.,0.,-0.)); +#53726 = ADVANCED_FACE('',(#53727),#53733,.T.); +#53727 = FACE_BOUND('',#53728,.F.); +#53728 = EDGE_LOOP('',(#53729,#53730,#53731,#53732)); +#53729 = ORIENTED_EDGE('',*,*,#53537,.T.); +#53730 = ORIENTED_EDGE('',*,*,#53585,.T.); +#53731 = ORIENTED_EDGE('',*,*,#53561,.F.); +#53732 = ORIENTED_EDGE('',*,*,#53600,.F.); +#53733 = PLANE('',#53734); +#53734 = AXIS2_PLACEMENT_3D('',#53735,#53736,#53737); +#53735 = CARTESIAN_POINT('',(8.55,-10.43,0.)); +#53736 = DIRECTION('',(-0.,-1.,-0.)); +#53737 = DIRECTION('',(0.,0.,-1.)); +#53738 = ADVANCED_FACE('',(#53739),#53750,.T.); +#53739 = FACE_BOUND('',#53740,.F.); +#53740 = EDGE_LOOP('',(#53741,#53742,#53743,#53749)); +#53741 = ORIENTED_EDGE('',*,*,#53688,.T.); +#53742 = ORIENTED_EDGE('',*,*,#53715,.T.); +#53743 = ORIENTED_EDGE('',*,*,#53744,.F.); +#53744 = EDGE_CURVE('',#53607,#53708,#53745,.T.); +#53745 = LINE('',#53746,#53747); +#53746 = CARTESIAN_POINT('',(9.,-10.43,0.4)); +#53747 = VECTOR('',#53748,1.); +#53748 = DIRECTION('',(0.,0.,1.)); +#53749 = ORIENTED_EDGE('',*,*,#53606,.F.); +#53750 = PLANE('',#53751); +#53751 = AXIS2_PLACEMENT_3D('',#53752,#53753,#53754); +#53752 = CARTESIAN_POINT('',(8.55,-10.43,0.4)); +#53753 = DIRECTION('',(-0.,-1.,-0.)); +#53754 = DIRECTION('',(-1.,0.,0.)); +#53755 = ADVANCED_FACE('',(#53756),#53762,.F.); +#53756 = FACE_BOUND('',#53757,.T.); +#53757 = EDGE_LOOP('',(#53758,#53759,#53760,#53761)); +#53758 = ORIENTED_EDGE('',*,*,#53638,.F.); +#53759 = ORIENTED_EDGE('',*,*,#53655,.T.); +#53760 = ORIENTED_EDGE('',*,*,#53707,.T.); +#53761 = ORIENTED_EDGE('',*,*,#53744,.F.); +#53762 = PLANE('',#53763); +#53763 = AXIS2_PLACEMENT_3D('',#53764,#53765,#53766); +#53764 = CARTESIAN_POINT('',(9.,-9.53,0.4)); +#53765 = DIRECTION('',(-1.,-0.,-0.)); +#53766 = DIRECTION('',(0.,1.,0.)); +#53767 = MANIFOLD_SOLID_BREP('',#53768); +#53768 = CLOSED_SHELL('',(#53769,#53809,#53840,#53871,#53921,#53952, + #53985,#54002,#54026,#54057,#54074,#54103,#54127,#54153,#54177, + #54204,#54216,#54233)); +#53769 = ADVANCED_FACE('',(#53770),#53804,.T.); +#53770 = FACE_BOUND('',#53771,.F.); +#53771 = EDGE_LOOP('',(#53772,#53782,#53790,#53798)); +#53772 = ORIENTED_EDGE('',*,*,#53773,.T.); +#53773 = EDGE_CURVE('',#53774,#53776,#53778,.T.); +#53774 = VERTEX_POINT('',#53775); +#53775 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53776 = VERTEX_POINT('',#53777); +#53777 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#53778 = LINE('',#53779,#53780); +#53779 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53780 = VECTOR('',#53781,1.); +#53781 = DIRECTION('',(0.,0.,1.)); +#53782 = ORIENTED_EDGE('',*,*,#53783,.T.); +#53783 = EDGE_CURVE('',#53776,#53784,#53786,.T.); +#53784 = VERTEX_POINT('',#53785); +#53785 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#53786 = LINE('',#53787,#53788); +#53787 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#53788 = VECTOR('',#53789,1.); +#53789 = DIRECTION('',(-1.,-0.,-0.)); +#53790 = ORIENTED_EDGE('',*,*,#53791,.F.); +#53791 = EDGE_CURVE('',#53792,#53784,#53794,.T.); +#53792 = VERTEX_POINT('',#53793); +#53793 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#53794 = LINE('',#53795,#53796); +#53795 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#53796 = VECTOR('',#53797,1.); +#53797 = DIRECTION('',(0.,0.,1.)); +#53798 = ORIENTED_EDGE('',*,*,#53799,.F.); +#53799 = EDGE_CURVE('',#53774,#53792,#53800,.T.); +#53800 = LINE('',#53801,#53802); +#53801 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53802 = VECTOR('',#53803,1.); +#53803 = DIRECTION('',(-1.,-0.,-0.)); +#53804 = PLANE('',#53805); +#53805 = AXIS2_PLACEMENT_3D('',#53806,#53807,#53808); +#53806 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53807 = DIRECTION('',(0.,1.,0.)); +#53808 = DIRECTION('',(1.,0.,0.)); +#53809 = ADVANCED_FACE('',(#53810),#53835,.F.); +#53810 = FACE_BOUND('',#53811,.T.); +#53811 = EDGE_LOOP('',(#53812,#53820,#53821,#53829)); +#53812 = ORIENTED_EDGE('',*,*,#53813,.F.); +#53813 = EDGE_CURVE('',#53774,#53814,#53816,.T.); +#53814 = VERTEX_POINT('',#53815); +#53815 = CARTESIAN_POINT('',(9.,-10.975,0.)); +#53816 = LINE('',#53817,#53818); +#53817 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53818 = VECTOR('',#53819,1.); +#53819 = DIRECTION('',(-0.,-1.,-0.)); +#53820 = ORIENTED_EDGE('',*,*,#53773,.T.); +#53821 = ORIENTED_EDGE('',*,*,#53822,.T.); +#53822 = EDGE_CURVE('',#53776,#53823,#53825,.T.); +#53823 = VERTEX_POINT('',#53824); +#53824 = CARTESIAN_POINT('',(9.,-10.975,0.4)); +#53825 = LINE('',#53826,#53827); +#53826 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#53827 = VECTOR('',#53828,1.); +#53828 = DIRECTION('',(-0.,-1.,-0.)); +#53829 = ORIENTED_EDGE('',*,*,#53830,.F.); +#53830 = EDGE_CURVE('',#53814,#53823,#53831,.T.); +#53831 = LINE('',#53832,#53833); +#53832 = CARTESIAN_POINT('',(9.,-10.975,0.8)); +#53833 = VECTOR('',#53834,1.); +#53834 = DIRECTION('',(0.,0.,1.)); +#53835 = PLANE('',#53836); +#53836 = AXIS2_PLACEMENT_3D('',#53837,#53838,#53839); +#53837 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53838 = DIRECTION('',(-1.,-0.,-0.)); +#53839 = DIRECTION('',(0.,1.,0.)); +#53840 = ADVANCED_FACE('',(#53841),#53866,.F.); +#53841 = FACE_BOUND('',#53842,.T.); +#53842 = EDGE_LOOP('',(#53843,#53851,#53859,#53865)); +#53843 = ORIENTED_EDGE('',*,*,#53844,.T.); +#53844 = EDGE_CURVE('',#53792,#53845,#53847,.T.); +#53845 = VERTEX_POINT('',#53846); +#53846 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#53847 = LINE('',#53848,#53849); +#53848 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#53849 = VECTOR('',#53850,1.); +#53850 = DIRECTION('',(-1.,-0.,-0.)); +#53851 = ORIENTED_EDGE('',*,*,#53852,.T.); +#53852 = EDGE_CURVE('',#53845,#53853,#53855,.T.); +#53853 = VERTEX_POINT('',#53854); +#53854 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#53855 = LINE('',#53856,#53857); +#53856 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#53857 = VECTOR('',#53858,1.); +#53858 = DIRECTION('',(0.,0.,1.)); +#53859 = ORIENTED_EDGE('',*,*,#53860,.F.); +#53860 = EDGE_CURVE('',#53784,#53853,#53861,.T.); +#53861 = LINE('',#53862,#53863); +#53862 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#53863 = VECTOR('',#53864,1.); +#53864 = DIRECTION('',(-1.,-0.,-0.)); +#53865 = ORIENTED_EDGE('',*,*,#53791,.F.); +#53866 = PLANE('',#53867); +#53867 = AXIS2_PLACEMENT_3D('',#53868,#53869,#53870); +#53868 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#53869 = DIRECTION('',(-0.,-1.,-0.)); +#53870 = DIRECTION('',(0.,0.,-1.)); +#53871 = ADVANCED_FACE('',(#53872),#53916,.F.); +#53872 = FACE_BOUND('',#53873,.T.); +#53873 = EDGE_LOOP('',(#53874,#53875,#53876,#53885,#53894,#53902,#53910) + ); +#53874 = ORIENTED_EDGE('',*,*,#53799,.F.); +#53875 = ORIENTED_EDGE('',*,*,#53813,.T.); +#53876 = ORIENTED_EDGE('',*,*,#53877,.F.); +#53877 = EDGE_CURVE('',#53878,#53814,#53880,.T.); +#53878 = VERTEX_POINT('',#53879); +#53879 = CARTESIAN_POINT('',(8.725,-11.25,0.)); +#53880 = CIRCLE('',#53881,0.275); +#53881 = AXIS2_PLACEMENT_3D('',#53882,#53883,#53884); +#53882 = CARTESIAN_POINT('',(9.,-11.25,0.)); +#53883 = DIRECTION('',(0.,0.,-1.)); +#53884 = DIRECTION('',(-1.,-0.,-0.)); +#53885 = ORIENTED_EDGE('',*,*,#53886,.F.); +#53886 = EDGE_CURVE('',#53887,#53878,#53889,.T.); +#53887 = VERTEX_POINT('',#53888); +#53888 = CARTESIAN_POINT('',(9.,-11.525,0.)); +#53889 = CIRCLE('',#53890,0.275); +#53890 = AXIS2_PLACEMENT_3D('',#53891,#53892,#53893); +#53891 = CARTESIAN_POINT('',(9.,-11.25,0.)); +#53892 = DIRECTION('',(0.,0.,-1.)); +#53893 = DIRECTION('',(-1.,-0.,-0.)); +#53894 = ORIENTED_EDGE('',*,*,#53895,.T.); +#53895 = EDGE_CURVE('',#53887,#53896,#53898,.T.); +#53896 = VERTEX_POINT('',#53897); +#53897 = CARTESIAN_POINT('',(9.,-11.7,0.)); +#53898 = LINE('',#53899,#53900); +#53899 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#53900 = VECTOR('',#53901,1.); +#53901 = DIRECTION('',(-0.,-1.,-0.)); +#53902 = ORIENTED_EDGE('',*,*,#53903,.F.); +#53903 = EDGE_CURVE('',#53904,#53896,#53906,.T.); +#53904 = VERTEX_POINT('',#53905); +#53905 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#53906 = LINE('',#53907,#53908); +#53907 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#53908 = VECTOR('',#53909,1.); +#53909 = DIRECTION('',(1.,0.,0.)); +#53910 = ORIENTED_EDGE('',*,*,#53911,.F.); +#53911 = EDGE_CURVE('',#53792,#53904,#53912,.T.); +#53912 = LINE('',#53913,#53914); +#53913 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#53914 = VECTOR('',#53915,1.); +#53915 = DIRECTION('',(-0.,-1.,-0.)); +#53916 = PLANE('',#53917); +#53917 = AXIS2_PLACEMENT_3D('',#53918,#53919,#53920); +#53918 = CARTESIAN_POINT('',(8.775,-11.25,0.)); +#53919 = DIRECTION('',(0.,0.,1.)); +#53920 = DIRECTION('',(1.,0.,-0.)); +#53921 = ADVANCED_FACE('',(#53922),#53947,.T.); +#53922 = FACE_BOUND('',#53923,.F.); +#53923 = EDGE_LOOP('',(#53924,#53932,#53940,#53946)); +#53924 = ORIENTED_EDGE('',*,*,#53925,.T.); +#53925 = EDGE_CURVE('',#53776,#53926,#53928,.T.); +#53926 = VERTEX_POINT('',#53927); +#53927 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#53928 = LINE('',#53929,#53930); +#53929 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#53930 = VECTOR('',#53931,1.); +#53931 = DIRECTION('',(0.,0.,1.)); +#53932 = ORIENTED_EDGE('',*,*,#53933,.T.); +#53933 = EDGE_CURVE('',#53926,#53934,#53936,.T.); +#53934 = VERTEX_POINT('',#53935); +#53935 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#53936 = LINE('',#53937,#53938); +#53937 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#53938 = VECTOR('',#53939,1.); +#53939 = DIRECTION('',(-1.,-0.,-0.)); +#53940 = ORIENTED_EDGE('',*,*,#53941,.F.); +#53941 = EDGE_CURVE('',#53784,#53934,#53942,.T.); +#53942 = LINE('',#53943,#53944); +#53943 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#53944 = VECTOR('',#53945,1.); +#53945 = DIRECTION('',(0.,0.,1.)); +#53946 = ORIENTED_EDGE('',*,*,#53783,.F.); +#53947 = PLANE('',#53948); +#53948 = AXIS2_PLACEMENT_3D('',#53949,#53950,#53951); +#53949 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#53950 = DIRECTION('',(0.,1.,0.)); +#53951 = DIRECTION('',(1.,0.,0.)); +#53952 = ADVANCED_FACE('',(#53953),#53980,.F.); +#53953 = FACE_BOUND('',#53954,.F.); +#53954 = EDGE_LOOP('',(#53955,#53963,#53964,#53965,#53973)); +#53955 = ORIENTED_EDGE('',*,*,#53956,.F.); +#53956 = EDGE_CURVE('',#53823,#53957,#53959,.T.); +#53957 = VERTEX_POINT('',#53958); +#53958 = CARTESIAN_POINT('',(9.,-10.975,0.8)); +#53959 = LINE('',#53960,#53961); +#53960 = CARTESIAN_POINT('',(9.,-10.975,0.8)); +#53961 = VECTOR('',#53962,1.); +#53962 = DIRECTION('',(0.,0.,1.)); +#53963 = ORIENTED_EDGE('',*,*,#53830,.F.); +#53964 = ORIENTED_EDGE('',*,*,#53877,.F.); +#53965 = ORIENTED_EDGE('',*,*,#53966,.F.); +#53966 = EDGE_CURVE('',#53967,#53878,#53969,.T.); +#53967 = VERTEX_POINT('',#53968); +#53968 = CARTESIAN_POINT('',(8.725,-11.25,0.8)); +#53969 = LINE('',#53970,#53971); +#53970 = CARTESIAN_POINT('',(8.725,-11.25,0.8)); +#53971 = VECTOR('',#53972,1.); +#53972 = DIRECTION('',(0.,0.,-1.)); +#53973 = ORIENTED_EDGE('',*,*,#53974,.T.); +#53974 = EDGE_CURVE('',#53967,#53957,#53975,.T.); +#53975 = CIRCLE('',#53976,0.275); +#53976 = AXIS2_PLACEMENT_3D('',#53977,#53978,#53979); +#53977 = CARTESIAN_POINT('',(9.,-11.25,0.8)); +#53978 = DIRECTION('',(0.,0.,-1.)); +#53979 = DIRECTION('',(-1.,-0.,-0.)); +#53980 = CYLINDRICAL_SURFACE('',#53981,0.275); +#53981 = AXIS2_PLACEMENT_3D('',#53982,#53983,#53984); +#53982 = CARTESIAN_POINT('',(9.,-11.25,0.8)); +#53983 = DIRECTION('',(0.,0.,1.)); +#53984 = DIRECTION('',(-1.,0.,0.)); +#53985 = ADVANCED_FACE('',(#53986),#53997,.F.); +#53986 = FACE_BOUND('',#53987,.T.); +#53987 = EDGE_LOOP('',(#53988,#53989,#53990,#53996)); +#53988 = ORIENTED_EDGE('',*,*,#53822,.F.); +#53989 = ORIENTED_EDGE('',*,*,#53925,.T.); +#53990 = ORIENTED_EDGE('',*,*,#53991,.T.); +#53991 = EDGE_CURVE('',#53926,#53957,#53992,.T.); +#53992 = LINE('',#53993,#53994); +#53993 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#53994 = VECTOR('',#53995,1.); +#53995 = DIRECTION('',(-0.,-1.,-0.)); +#53996 = ORIENTED_EDGE('',*,*,#53956,.F.); +#53997 = PLANE('',#53998); +#53998 = AXIS2_PLACEMENT_3D('',#53999,#54000,#54001); +#53999 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#54000 = DIRECTION('',(-1.,-0.,-0.)); +#54001 = DIRECTION('',(0.,1.,0.)); +#54002 = ADVANCED_FACE('',(#54003),#54021,.T.); +#54003 = FACE_BOUND('',#54004,.F.); +#54004 = EDGE_LOOP('',(#54005,#54006,#54014,#54020)); +#54005 = ORIENTED_EDGE('',*,*,#53844,.T.); +#54006 = ORIENTED_EDGE('',*,*,#54007,.T.); +#54007 = EDGE_CURVE('',#53845,#54008,#54010,.T.); +#54008 = VERTEX_POINT('',#54009); +#54009 = CARTESIAN_POINT('',(8.15,-11.7,0.)); +#54010 = LINE('',#54011,#54012); +#54011 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#54012 = VECTOR('',#54013,1.); +#54013 = DIRECTION('',(-0.,-1.,-0.)); +#54014 = ORIENTED_EDGE('',*,*,#54015,.F.); +#54015 = EDGE_CURVE('',#53904,#54008,#54016,.T.); +#54016 = LINE('',#54017,#54018); +#54017 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#54018 = VECTOR('',#54019,1.); +#54019 = DIRECTION('',(-1.,-0.,-0.)); +#54020 = ORIENTED_EDGE('',*,*,#53911,.F.); +#54021 = PLANE('',#54022); +#54022 = AXIS2_PLACEMENT_3D('',#54023,#54024,#54025); +#54023 = CARTESIAN_POINT('',(8.55,-10.8,0.)); +#54024 = DIRECTION('',(-0.,-0.,-1.)); +#54025 = DIRECTION('',(0.,1.,-0.)); +#54026 = ADVANCED_FACE('',(#54027),#54052,.F.); +#54027 = FACE_BOUND('',#54028,.T.); +#54028 = EDGE_LOOP('',(#54029,#54030,#54038,#54046)); +#54029 = ORIENTED_EDGE('',*,*,#53860,.T.); +#54030 = ORIENTED_EDGE('',*,*,#54031,.T.); +#54031 = EDGE_CURVE('',#53853,#54032,#54034,.T.); +#54032 = VERTEX_POINT('',#54033); +#54033 = CARTESIAN_POINT('',(8.15,-11.7,0.4)); +#54034 = LINE('',#54035,#54036); +#54035 = CARTESIAN_POINT('',(8.15,-10.8,0.4)); +#54036 = VECTOR('',#54037,1.); +#54037 = DIRECTION('',(-0.,-1.,-0.)); +#54038 = ORIENTED_EDGE('',*,*,#54039,.F.); +#54039 = EDGE_CURVE('',#54040,#54032,#54042,.T.); +#54040 = VERTEX_POINT('',#54041); +#54041 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#54042 = LINE('',#54043,#54044); +#54043 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#54044 = VECTOR('',#54045,1.); +#54045 = DIRECTION('',(-1.,-0.,-0.)); +#54046 = ORIENTED_EDGE('',*,*,#54047,.F.); +#54047 = EDGE_CURVE('',#53784,#54040,#54048,.T.); +#54048 = LINE('',#54049,#54050); +#54049 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#54050 = VECTOR('',#54051,1.); +#54051 = DIRECTION('',(-0.,-1.,-0.)); +#54052 = PLANE('',#54053); +#54053 = AXIS2_PLACEMENT_3D('',#54054,#54055,#54056); +#54054 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#54055 = DIRECTION('',(-0.,-0.,-1.)); +#54056 = DIRECTION('',(0.,1.,-0.)); +#54057 = ADVANCED_FACE('',(#54058),#54069,.T.); +#54058 = FACE_BOUND('',#54059,.F.); +#54059 = EDGE_LOOP('',(#54060,#54061,#54062,#54068)); +#54060 = ORIENTED_EDGE('',*,*,#53852,.T.); +#54061 = ORIENTED_EDGE('',*,*,#54031,.T.); +#54062 = ORIENTED_EDGE('',*,*,#54063,.F.); +#54063 = EDGE_CURVE('',#54008,#54032,#54064,.T.); +#54064 = LINE('',#54065,#54066); +#54065 = CARTESIAN_POINT('',(8.15,-11.7,0.)); +#54066 = VECTOR('',#54067,1.); +#54067 = DIRECTION('',(0.,0.,1.)); +#54068 = ORIENTED_EDGE('',*,*,#54007,.F.); +#54069 = PLANE('',#54070); +#54070 = AXIS2_PLACEMENT_3D('',#54071,#54072,#54073); +#54071 = CARTESIAN_POINT('',(8.15,-10.8,0.)); +#54072 = DIRECTION('',(-1.,-0.,-0.)); +#54073 = DIRECTION('',(0.,1.,0.)); +#54074 = ADVANCED_FACE('',(#54075),#54098,.T.); +#54075 = FACE_BOUND('',#54076,.F.); +#54076 = EDGE_LOOP('',(#54077,#54083,#54091,#54097)); +#54077 = ORIENTED_EDGE('',*,*,#54078,.T.); +#54078 = EDGE_CURVE('',#53904,#54040,#54079,.T.); +#54079 = LINE('',#54080,#54081); +#54080 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#54081 = VECTOR('',#54082,1.); +#54082 = DIRECTION('',(0.,0.,1.)); +#54083 = ORIENTED_EDGE('',*,*,#54084,.T.); +#54084 = EDGE_CURVE('',#54040,#54085,#54087,.T.); +#54085 = VERTEX_POINT('',#54086); +#54086 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#54087 = LINE('',#54088,#54089); +#54088 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#54089 = VECTOR('',#54090,1.); +#54090 = DIRECTION('',(1.,0.,0.)); +#54091 = ORIENTED_EDGE('',*,*,#54092,.F.); +#54092 = EDGE_CURVE('',#53896,#54085,#54093,.T.); +#54093 = LINE('',#54094,#54095); +#54094 = CARTESIAN_POINT('',(9.,-11.7,0.)); +#54095 = VECTOR('',#54096,1.); +#54096 = DIRECTION('',(0.,0.,1.)); +#54097 = ORIENTED_EDGE('',*,*,#53903,.F.); +#54098 = PLANE('',#54099); +#54099 = AXIS2_PLACEMENT_3D('',#54100,#54101,#54102); +#54100 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#54101 = DIRECTION('',(-0.,-1.,-0.)); +#54102 = DIRECTION('',(-1.,0.,0.)); +#54103 = ADVANCED_FACE('',(#54104),#54122,.F.); +#54104 = FACE_BOUND('',#54105,.T.); +#54105 = EDGE_LOOP('',(#54106,#54107,#54115,#54121)); +#54106 = ORIENTED_EDGE('',*,*,#53895,.F.); +#54107 = ORIENTED_EDGE('',*,*,#54108,.T.); +#54108 = EDGE_CURVE('',#53887,#54109,#54111,.T.); +#54109 = VERTEX_POINT('',#54110); +#54110 = CARTESIAN_POINT('',(9.,-11.525,0.4)); +#54111 = LINE('',#54112,#54113); +#54112 = CARTESIAN_POINT('',(9.,-11.525,0.8)); +#54113 = VECTOR('',#54114,1.); +#54114 = DIRECTION('',(0.,0.,1.)); +#54115 = ORIENTED_EDGE('',*,*,#54116,.T.); +#54116 = EDGE_CURVE('',#54109,#54085,#54117,.T.); +#54117 = LINE('',#54118,#54119); +#54118 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#54119 = VECTOR('',#54120,1.); +#54120 = DIRECTION('',(-0.,-1.,-0.)); +#54121 = ORIENTED_EDGE('',*,*,#54092,.F.); +#54122 = PLANE('',#54123); +#54123 = AXIS2_PLACEMENT_3D('',#54124,#54125,#54126); +#54124 = CARTESIAN_POINT('',(9.,-10.8,0.)); +#54125 = DIRECTION('',(-1.,-0.,-0.)); +#54126 = DIRECTION('',(0.,1.,0.)); +#54127 = ADVANCED_FACE('',(#54128),#54148,.F.); +#54128 = FACE_BOUND('',#54129,.F.); +#54129 = EDGE_LOOP('',(#54130,#54131,#54132,#54140,#54147)); +#54130 = ORIENTED_EDGE('',*,*,#53886,.F.); +#54131 = ORIENTED_EDGE('',*,*,#54108,.T.); +#54132 = ORIENTED_EDGE('',*,*,#54133,.T.); +#54133 = EDGE_CURVE('',#54109,#54134,#54136,.T.); +#54134 = VERTEX_POINT('',#54135); +#54135 = CARTESIAN_POINT('',(9.,-11.525,0.8)); +#54136 = LINE('',#54137,#54138); +#54137 = CARTESIAN_POINT('',(9.,-11.525,0.8)); +#54138 = VECTOR('',#54139,1.); +#54139 = DIRECTION('',(0.,0.,1.)); +#54140 = ORIENTED_EDGE('',*,*,#54141,.T.); +#54141 = EDGE_CURVE('',#54134,#53967,#54142,.T.); +#54142 = CIRCLE('',#54143,0.275); +#54143 = AXIS2_PLACEMENT_3D('',#54144,#54145,#54146); +#54144 = CARTESIAN_POINT('',(9.,-11.25,0.8)); +#54145 = DIRECTION('',(0.,0.,-1.)); +#54146 = DIRECTION('',(-1.,-0.,-0.)); +#54147 = ORIENTED_EDGE('',*,*,#53966,.T.); +#54148 = CYLINDRICAL_SURFACE('',#54149,0.275); +#54149 = AXIS2_PLACEMENT_3D('',#54150,#54151,#54152); +#54150 = CARTESIAN_POINT('',(9.,-11.25,0.8)); +#54151 = DIRECTION('',(0.,0.,1.)); +#54152 = DIRECTION('',(-1.,0.,0.)); +#54153 = ADVANCED_FACE('',(#54154),#54172,.T.); +#54154 = FACE_BOUND('',#54155,.F.); +#54155 = EDGE_LOOP('',(#54156,#54157,#54165,#54171)); +#54156 = ORIENTED_EDGE('',*,*,#53941,.T.); +#54157 = ORIENTED_EDGE('',*,*,#54158,.T.); +#54158 = EDGE_CURVE('',#53934,#54159,#54161,.T.); +#54159 = VERTEX_POINT('',#54160); +#54160 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#54161 = LINE('',#54162,#54163); +#54162 = CARTESIAN_POINT('',(8.55,-10.8,0.8)); +#54163 = VECTOR('',#54164,1.); +#54164 = DIRECTION('',(-0.,-1.,-0.)); +#54165 = ORIENTED_EDGE('',*,*,#54166,.F.); +#54166 = EDGE_CURVE('',#54040,#54159,#54167,.T.); +#54167 = LINE('',#54168,#54169); +#54168 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#54169 = VECTOR('',#54170,1.); +#54170 = DIRECTION('',(0.,0.,1.)); +#54171 = ORIENTED_EDGE('',*,*,#54047,.F.); +#54172 = PLANE('',#54173); +#54173 = AXIS2_PLACEMENT_3D('',#54174,#54175,#54176); +#54174 = CARTESIAN_POINT('',(8.55,-10.8,0.4)); +#54175 = DIRECTION('',(-1.,-0.,-0.)); +#54176 = DIRECTION('',(0.,1.,0.)); +#54177 = ADVANCED_FACE('',(#54178),#54199,.T.); +#54178 = FACE_BOUND('',#54179,.F.); +#54179 = EDGE_LOOP('',(#54180,#54181,#54182,#54183,#54184,#54192,#54198) + ); +#54180 = ORIENTED_EDGE('',*,*,#53933,.F.); +#54181 = ORIENTED_EDGE('',*,*,#53991,.T.); +#54182 = ORIENTED_EDGE('',*,*,#53974,.F.); +#54183 = ORIENTED_EDGE('',*,*,#54141,.F.); +#54184 = ORIENTED_EDGE('',*,*,#54185,.T.); +#54185 = EDGE_CURVE('',#54134,#54186,#54188,.T.); +#54186 = VERTEX_POINT('',#54187); +#54187 = CARTESIAN_POINT('',(9.,-11.7,0.8)); +#54188 = LINE('',#54189,#54190); +#54189 = CARTESIAN_POINT('',(9.,-10.8,0.8)); +#54190 = VECTOR('',#54191,1.); +#54191 = DIRECTION('',(-0.,-1.,-0.)); +#54192 = ORIENTED_EDGE('',*,*,#54193,.F.); +#54193 = EDGE_CURVE('',#54159,#54186,#54194,.T.); +#54194 = LINE('',#54195,#54196); +#54195 = CARTESIAN_POINT('',(8.55,-11.7,0.8)); +#54196 = VECTOR('',#54197,1.); +#54197 = DIRECTION('',(1.,0.,0.)); +#54198 = ORIENTED_EDGE('',*,*,#54158,.F.); +#54199 = PLANE('',#54200); +#54200 = AXIS2_PLACEMENT_3D('',#54201,#54202,#54203); +#54201 = CARTESIAN_POINT('',(8.775,-11.25,0.8)); +#54202 = DIRECTION('',(0.,0.,1.)); +#54203 = DIRECTION('',(1.,0.,-0.)); +#54204 = ADVANCED_FACE('',(#54205),#54211,.T.); +#54205 = FACE_BOUND('',#54206,.F.); +#54206 = EDGE_LOOP('',(#54207,#54208,#54209,#54210)); +#54207 = ORIENTED_EDGE('',*,*,#54015,.T.); +#54208 = ORIENTED_EDGE('',*,*,#54063,.T.); +#54209 = ORIENTED_EDGE('',*,*,#54039,.F.); +#54210 = ORIENTED_EDGE('',*,*,#54078,.F.); +#54211 = PLANE('',#54212); +#54212 = AXIS2_PLACEMENT_3D('',#54213,#54214,#54215); +#54213 = CARTESIAN_POINT('',(8.55,-11.7,0.)); +#54214 = DIRECTION('',(-0.,-1.,-0.)); +#54215 = DIRECTION('',(0.,0.,-1.)); +#54216 = ADVANCED_FACE('',(#54217),#54228,.T.); +#54217 = FACE_BOUND('',#54218,.F.); +#54218 = EDGE_LOOP('',(#54219,#54220,#54221,#54227)); +#54219 = ORIENTED_EDGE('',*,*,#54166,.T.); +#54220 = ORIENTED_EDGE('',*,*,#54193,.T.); +#54221 = ORIENTED_EDGE('',*,*,#54222,.F.); +#54222 = EDGE_CURVE('',#54085,#54186,#54223,.T.); +#54223 = LINE('',#54224,#54225); +#54224 = CARTESIAN_POINT('',(9.,-11.7,0.4)); +#54225 = VECTOR('',#54226,1.); +#54226 = DIRECTION('',(0.,0.,1.)); +#54227 = ORIENTED_EDGE('',*,*,#54084,.F.); +#54228 = PLANE('',#54229); +#54229 = AXIS2_PLACEMENT_3D('',#54230,#54231,#54232); +#54230 = CARTESIAN_POINT('',(8.55,-11.7,0.4)); +#54231 = DIRECTION('',(-0.,-1.,-0.)); +#54232 = DIRECTION('',(-1.,0.,0.)); +#54233 = ADVANCED_FACE('',(#54234),#54240,.F.); +#54234 = FACE_BOUND('',#54235,.T.); +#54235 = EDGE_LOOP('',(#54236,#54237,#54238,#54239)); +#54236 = ORIENTED_EDGE('',*,*,#54116,.F.); +#54237 = ORIENTED_EDGE('',*,*,#54133,.T.); +#54238 = ORIENTED_EDGE('',*,*,#54185,.T.); +#54239 = ORIENTED_EDGE('',*,*,#54222,.F.); +#54240 = PLANE('',#54241); +#54241 = AXIS2_PLACEMENT_3D('',#54242,#54243,#54244); +#54242 = CARTESIAN_POINT('',(9.,-10.8,0.4)); +#54243 = DIRECTION('',(-1.,-0.,-0.)); +#54244 = DIRECTION('',(0.,1.,0.)); +#54245 = MANIFOLD_SOLID_BREP('',#54246); +#54246 = CLOSED_SHELL('',(#54247,#54287,#54318,#54349,#54399,#54430, + #54463,#54480,#54504,#54535,#54552,#54581,#54605,#54631,#54655, + #54682,#54694,#54711)); +#54247 = ADVANCED_FACE('',(#54248),#54282,.T.); +#54248 = FACE_BOUND('',#54249,.F.); +#54249 = EDGE_LOOP('',(#54250,#54260,#54268,#54276)); +#54250 = ORIENTED_EDGE('',*,*,#54251,.T.); +#54251 = EDGE_CURVE('',#54252,#54254,#54256,.T.); +#54252 = VERTEX_POINT('',#54253); +#54253 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54254 = VERTEX_POINT('',#54255); +#54255 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54256 = LINE('',#54257,#54258); +#54257 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54258 = VECTOR('',#54259,1.); +#54259 = DIRECTION('',(0.,0.,1.)); +#54260 = ORIENTED_EDGE('',*,*,#54261,.T.); +#54261 = EDGE_CURVE('',#54254,#54262,#54264,.T.); +#54262 = VERTEX_POINT('',#54263); +#54263 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54264 = LINE('',#54265,#54266); +#54265 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54266 = VECTOR('',#54267,1.); +#54267 = DIRECTION('',(-4.4E-16,1.,0.)); +#54268 = ORIENTED_EDGE('',*,*,#54269,.F.); +#54269 = EDGE_CURVE('',#54270,#54262,#54272,.T.); +#54270 = VERTEX_POINT('',#54271); +#54271 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54272 = LINE('',#54273,#54274); +#54273 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54274 = VECTOR('',#54275,1.); +#54275 = DIRECTION('',(0.,0.,1.)); +#54276 = ORIENTED_EDGE('',*,*,#54277,.F.); +#54277 = EDGE_CURVE('',#54252,#54270,#54278,.T.); +#54278 = LINE('',#54279,#54280); +#54279 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54280 = VECTOR('',#54281,1.); +#54281 = DIRECTION('',(-4.4E-16,1.,0.)); +#54282 = PLANE('',#54283); +#54283 = AXIS2_PLACEMENT_3D('',#54284,#54285,#54286); +#54284 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54285 = DIRECTION('',(1.,4.4E-16,0.)); +#54286 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54287 = ADVANCED_FACE('',(#54288),#54313,.F.); +#54288 = FACE_BOUND('',#54289,.T.); +#54289 = EDGE_LOOP('',(#54290,#54298,#54299,#54307)); +#54290 = ORIENTED_EDGE('',*,*,#54291,.F.); +#54291 = EDGE_CURVE('',#54252,#54292,#54294,.T.); +#54292 = VERTEX_POINT('',#54293); +#54293 = CARTESIAN_POINT('',(7.26,-12.75,0.)); +#54294 = LINE('',#54295,#54296); +#54295 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54296 = VECTOR('',#54297,1.); +#54297 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54298 = ORIENTED_EDGE('',*,*,#54251,.T.); +#54299 = ORIENTED_EDGE('',*,*,#54300,.T.); +#54300 = EDGE_CURVE('',#54254,#54301,#54303,.T.); +#54301 = VERTEX_POINT('',#54302); +#54302 = CARTESIAN_POINT('',(7.26,-12.75,0.4)); +#54303 = LINE('',#54304,#54305); +#54304 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54305 = VECTOR('',#54306,1.); +#54306 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54307 = ORIENTED_EDGE('',*,*,#54308,.F.); +#54308 = EDGE_CURVE('',#54292,#54301,#54309,.T.); +#54309 = LINE('',#54310,#54311); +#54310 = CARTESIAN_POINT('',(7.26,-12.75,0.8)); +#54311 = VECTOR('',#54312,1.); +#54312 = DIRECTION('',(0.,0.,1.)); +#54313 = PLANE('',#54314); +#54314 = AXIS2_PLACEMENT_3D('',#54315,#54316,#54317); +#54315 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54316 = DIRECTION('',(-4.4E-16,1.,0.)); +#54317 = DIRECTION('',(1.,4.4E-16,0.)); +#54318 = ADVANCED_FACE('',(#54319),#54344,.F.); +#54319 = FACE_BOUND('',#54320,.T.); +#54320 = EDGE_LOOP('',(#54321,#54329,#54337,#54343)); +#54321 = ORIENTED_EDGE('',*,*,#54322,.T.); +#54322 = EDGE_CURVE('',#54270,#54323,#54325,.T.); +#54323 = VERTEX_POINT('',#54324); +#54324 = CARTESIAN_POINT('',(7.435,-11.9,0.)); +#54325 = LINE('',#54326,#54327); +#54326 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54327 = VECTOR('',#54328,1.); +#54328 = DIRECTION('',(-4.4E-16,1.,0.)); +#54329 = ORIENTED_EDGE('',*,*,#54330,.T.); +#54330 = EDGE_CURVE('',#54323,#54331,#54333,.T.); +#54331 = VERTEX_POINT('',#54332); +#54332 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#54333 = LINE('',#54334,#54335); +#54334 = CARTESIAN_POINT('',(7.435,-11.9,0.)); +#54335 = VECTOR('',#54336,1.); +#54336 = DIRECTION('',(0.,0.,1.)); +#54337 = ORIENTED_EDGE('',*,*,#54338,.F.); +#54338 = EDGE_CURVE('',#54262,#54331,#54339,.T.); +#54339 = LINE('',#54340,#54341); +#54340 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54341 = VECTOR('',#54342,1.); +#54342 = DIRECTION('',(-4.4E-16,1.,0.)); +#54343 = ORIENTED_EDGE('',*,*,#54269,.F.); +#54344 = PLANE('',#54345); +#54345 = AXIS2_PLACEMENT_3D('',#54346,#54347,#54348); +#54346 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54347 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54348 = DIRECTION('',(0.,-0.,-1.)); +#54349 = ADVANCED_FACE('',(#54350),#54394,.F.); +#54350 = FACE_BOUND('',#54351,.T.); +#54351 = EDGE_LOOP('',(#54352,#54353,#54354,#54363,#54372,#54380,#54388) + ); +#54352 = ORIENTED_EDGE('',*,*,#54277,.F.); +#54353 = ORIENTED_EDGE('',*,*,#54291,.T.); +#54354 = ORIENTED_EDGE('',*,*,#54355,.F.); +#54355 = EDGE_CURVE('',#54356,#54292,#54358,.T.); +#54356 = VERTEX_POINT('',#54357); +#54357 = CARTESIAN_POINT('',(6.985,-12.475,0.)); +#54358 = CIRCLE('',#54359,0.275); +#54359 = AXIS2_PLACEMENT_3D('',#54360,#54361,#54362); +#54360 = CARTESIAN_POINT('',(6.985,-12.75,0.)); +#54361 = DIRECTION('',(0.,0.,-1.)); +#54362 = DIRECTION('',(-4.4E-16,1.,0.)); +#54363 = ORIENTED_EDGE('',*,*,#54364,.F.); +#54364 = EDGE_CURVE('',#54365,#54356,#54367,.T.); +#54365 = VERTEX_POINT('',#54366); +#54366 = CARTESIAN_POINT('',(6.71,-12.75,0.)); +#54367 = CIRCLE('',#54368,0.275); +#54368 = AXIS2_PLACEMENT_3D('',#54369,#54370,#54371); +#54369 = CARTESIAN_POINT('',(6.985,-12.75,0.)); +#54370 = DIRECTION('',(0.,0.,-1.)); +#54371 = DIRECTION('',(-4.4E-16,1.,0.)); +#54372 = ORIENTED_EDGE('',*,*,#54373,.T.); +#54373 = EDGE_CURVE('',#54365,#54374,#54376,.T.); +#54374 = VERTEX_POINT('',#54375); +#54375 = CARTESIAN_POINT('',(6.535,-12.75,0.)); +#54376 = LINE('',#54377,#54378); +#54377 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54378 = VECTOR('',#54379,1.); +#54379 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54380 = ORIENTED_EDGE('',*,*,#54381,.F.); +#54381 = EDGE_CURVE('',#54382,#54374,#54384,.T.); +#54382 = VERTEX_POINT('',#54383); +#54383 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54384 = LINE('',#54385,#54386); +#54385 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54386 = VECTOR('',#54387,1.); +#54387 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54388 = ORIENTED_EDGE('',*,*,#54389,.F.); +#54389 = EDGE_CURVE('',#54270,#54382,#54390,.T.); +#54390 = LINE('',#54391,#54392); +#54391 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54392 = VECTOR('',#54393,1.); +#54393 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54394 = PLANE('',#54395); +#54395 = AXIS2_PLACEMENT_3D('',#54396,#54397,#54398); +#54396 = CARTESIAN_POINT('',(6.985,-12.525,0.)); +#54397 = DIRECTION('',(0.,0.,1.)); +#54398 = DIRECTION('',(4.4E-16,-1.,0.)); +#54399 = ADVANCED_FACE('',(#54400),#54425,.T.); +#54400 = FACE_BOUND('',#54401,.F.); +#54401 = EDGE_LOOP('',(#54402,#54410,#54418,#54424)); +#54402 = ORIENTED_EDGE('',*,*,#54403,.T.); +#54403 = EDGE_CURVE('',#54254,#54404,#54406,.T.); +#54404 = VERTEX_POINT('',#54405); +#54405 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#54406 = LINE('',#54407,#54408); +#54407 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54408 = VECTOR('',#54409,1.); +#54409 = DIRECTION('',(0.,0.,1.)); +#54410 = ORIENTED_EDGE('',*,*,#54411,.T.); +#54411 = EDGE_CURVE('',#54404,#54412,#54414,.T.); +#54412 = VERTEX_POINT('',#54413); +#54413 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#54414 = LINE('',#54415,#54416); +#54415 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#54416 = VECTOR('',#54417,1.); +#54417 = DIRECTION('',(-4.4E-16,1.,0.)); +#54418 = ORIENTED_EDGE('',*,*,#54419,.F.); +#54419 = EDGE_CURVE('',#54262,#54412,#54420,.T.); +#54420 = LINE('',#54421,#54422); +#54421 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54422 = VECTOR('',#54423,1.); +#54423 = DIRECTION('',(0.,0.,1.)); +#54424 = ORIENTED_EDGE('',*,*,#54261,.F.); +#54425 = PLANE('',#54426); +#54426 = AXIS2_PLACEMENT_3D('',#54427,#54428,#54429); +#54427 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54428 = DIRECTION('',(1.,4.4E-16,0.)); +#54429 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54430 = ADVANCED_FACE('',(#54431),#54458,.F.); +#54431 = FACE_BOUND('',#54432,.F.); +#54432 = EDGE_LOOP('',(#54433,#54441,#54442,#54443,#54451)); +#54433 = ORIENTED_EDGE('',*,*,#54434,.F.); +#54434 = EDGE_CURVE('',#54301,#54435,#54437,.T.); +#54435 = VERTEX_POINT('',#54436); +#54436 = CARTESIAN_POINT('',(7.26,-12.75,0.8)); +#54437 = LINE('',#54438,#54439); +#54438 = CARTESIAN_POINT('',(7.26,-12.75,0.8)); +#54439 = VECTOR('',#54440,1.); +#54440 = DIRECTION('',(0.,0.,1.)); +#54441 = ORIENTED_EDGE('',*,*,#54308,.F.); +#54442 = ORIENTED_EDGE('',*,*,#54355,.F.); +#54443 = ORIENTED_EDGE('',*,*,#54444,.F.); +#54444 = EDGE_CURVE('',#54445,#54356,#54447,.T.); +#54445 = VERTEX_POINT('',#54446); +#54446 = CARTESIAN_POINT('',(6.985,-12.475,0.8)); +#54447 = LINE('',#54448,#54449); +#54448 = CARTESIAN_POINT('',(6.985,-12.475,0.8)); +#54449 = VECTOR('',#54450,1.); +#54450 = DIRECTION('',(0.,-0.,-1.)); +#54451 = ORIENTED_EDGE('',*,*,#54452,.T.); +#54452 = EDGE_CURVE('',#54445,#54435,#54453,.T.); +#54453 = CIRCLE('',#54454,0.275); +#54454 = AXIS2_PLACEMENT_3D('',#54455,#54456,#54457); +#54455 = CARTESIAN_POINT('',(6.985,-12.75,0.8)); +#54456 = DIRECTION('',(0.,0.,-1.)); +#54457 = DIRECTION('',(-4.4E-16,1.,0.)); +#54458 = CYLINDRICAL_SURFACE('',#54459,0.275); +#54459 = AXIS2_PLACEMENT_3D('',#54460,#54461,#54462); +#54460 = CARTESIAN_POINT('',(6.985,-12.75,0.8)); +#54461 = DIRECTION('',(0.,0.,1.)); +#54462 = DIRECTION('',(-4.4E-16,1.,0.)); +#54463 = ADVANCED_FACE('',(#54464),#54475,.F.); +#54464 = FACE_BOUND('',#54465,.T.); +#54465 = EDGE_LOOP('',(#54466,#54467,#54468,#54474)); +#54466 = ORIENTED_EDGE('',*,*,#54300,.F.); +#54467 = ORIENTED_EDGE('',*,*,#54403,.T.); +#54468 = ORIENTED_EDGE('',*,*,#54469,.T.); +#54469 = EDGE_CURVE('',#54404,#54435,#54470,.T.); +#54470 = LINE('',#54471,#54472); +#54471 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#54472 = VECTOR('',#54473,1.); +#54473 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54474 = ORIENTED_EDGE('',*,*,#54434,.F.); +#54475 = PLANE('',#54476); +#54476 = AXIS2_PLACEMENT_3D('',#54477,#54478,#54479); +#54477 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54478 = DIRECTION('',(-4.4E-16,1.,0.)); +#54479 = DIRECTION('',(1.,4.4E-16,0.)); +#54480 = ADVANCED_FACE('',(#54481),#54499,.T.); +#54481 = FACE_BOUND('',#54482,.F.); +#54482 = EDGE_LOOP('',(#54483,#54484,#54492,#54498)); +#54483 = ORIENTED_EDGE('',*,*,#54322,.T.); +#54484 = ORIENTED_EDGE('',*,*,#54485,.T.); +#54485 = EDGE_CURVE('',#54323,#54486,#54488,.T.); +#54486 = VERTEX_POINT('',#54487); +#54487 = CARTESIAN_POINT('',(6.535,-11.9,0.)); +#54488 = LINE('',#54489,#54490); +#54489 = CARTESIAN_POINT('',(7.435,-11.9,0.)); +#54490 = VECTOR('',#54491,1.); +#54491 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54492 = ORIENTED_EDGE('',*,*,#54493,.F.); +#54493 = EDGE_CURVE('',#54382,#54486,#54494,.T.); +#54494 = LINE('',#54495,#54496); +#54495 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54496 = VECTOR('',#54497,1.); +#54497 = DIRECTION('',(-4.4E-16,1.,0.)); +#54498 = ORIENTED_EDGE('',*,*,#54389,.F.); +#54499 = PLANE('',#54500); +#54500 = AXIS2_PLACEMENT_3D('',#54501,#54502,#54503); +#54501 = CARTESIAN_POINT('',(7.435,-12.3,0.)); +#54502 = DIRECTION('',(0.,0.,-1.)); +#54503 = DIRECTION('',(1.,4.4E-16,0.)); +#54504 = ADVANCED_FACE('',(#54505),#54530,.F.); +#54505 = FACE_BOUND('',#54506,.T.); +#54506 = EDGE_LOOP('',(#54507,#54508,#54516,#54524)); +#54507 = ORIENTED_EDGE('',*,*,#54338,.T.); +#54508 = ORIENTED_EDGE('',*,*,#54509,.T.); +#54509 = EDGE_CURVE('',#54331,#54510,#54512,.T.); +#54510 = VERTEX_POINT('',#54511); +#54511 = CARTESIAN_POINT('',(6.535,-11.9,0.4)); +#54512 = LINE('',#54513,#54514); +#54513 = CARTESIAN_POINT('',(7.435,-11.9,0.4)); +#54514 = VECTOR('',#54515,1.); +#54515 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54516 = ORIENTED_EDGE('',*,*,#54517,.F.); +#54517 = EDGE_CURVE('',#54518,#54510,#54520,.T.); +#54518 = VERTEX_POINT('',#54519); +#54519 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#54520 = LINE('',#54521,#54522); +#54521 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#54522 = VECTOR('',#54523,1.); +#54523 = DIRECTION('',(-4.4E-16,1.,0.)); +#54524 = ORIENTED_EDGE('',*,*,#54525,.F.); +#54525 = EDGE_CURVE('',#54262,#54518,#54526,.T.); +#54526 = LINE('',#54527,#54528); +#54527 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54528 = VECTOR('',#54529,1.); +#54529 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54530 = PLANE('',#54531); +#54531 = AXIS2_PLACEMENT_3D('',#54532,#54533,#54534); +#54532 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54533 = DIRECTION('',(0.,0.,-1.)); +#54534 = DIRECTION('',(1.,4.4E-16,0.)); +#54535 = ADVANCED_FACE('',(#54536),#54547,.T.); +#54536 = FACE_BOUND('',#54537,.F.); +#54537 = EDGE_LOOP('',(#54538,#54539,#54540,#54546)); +#54538 = ORIENTED_EDGE('',*,*,#54330,.T.); +#54539 = ORIENTED_EDGE('',*,*,#54509,.T.); +#54540 = ORIENTED_EDGE('',*,*,#54541,.F.); +#54541 = EDGE_CURVE('',#54486,#54510,#54542,.T.); +#54542 = LINE('',#54543,#54544); +#54543 = CARTESIAN_POINT('',(6.535,-11.9,0.)); +#54544 = VECTOR('',#54545,1.); +#54545 = DIRECTION('',(0.,0.,1.)); +#54546 = ORIENTED_EDGE('',*,*,#54485,.F.); +#54547 = PLANE('',#54548); +#54548 = AXIS2_PLACEMENT_3D('',#54549,#54550,#54551); +#54549 = CARTESIAN_POINT('',(7.435,-11.9,0.)); +#54550 = DIRECTION('',(-4.4E-16,1.,0.)); +#54551 = DIRECTION('',(1.,4.4E-16,0.)); +#54552 = ADVANCED_FACE('',(#54553),#54576,.T.); +#54553 = FACE_BOUND('',#54554,.F.); +#54554 = EDGE_LOOP('',(#54555,#54561,#54569,#54575)); +#54555 = ORIENTED_EDGE('',*,*,#54556,.T.); +#54556 = EDGE_CURVE('',#54382,#54518,#54557,.T.); +#54557 = LINE('',#54558,#54559); +#54558 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54559 = VECTOR('',#54560,1.); +#54560 = DIRECTION('',(0.,0.,1.)); +#54561 = ORIENTED_EDGE('',*,*,#54562,.T.); +#54562 = EDGE_CURVE('',#54518,#54563,#54565,.T.); +#54563 = VERTEX_POINT('',#54564); +#54564 = CARTESIAN_POINT('',(6.535,-12.75,0.4)); +#54565 = LINE('',#54566,#54567); +#54566 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#54567 = VECTOR('',#54568,1.); +#54568 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54569 = ORIENTED_EDGE('',*,*,#54570,.F.); +#54570 = EDGE_CURVE('',#54374,#54563,#54571,.T.); +#54571 = LINE('',#54572,#54573); +#54572 = CARTESIAN_POINT('',(6.535,-12.75,0.)); +#54573 = VECTOR('',#54574,1.); +#54574 = DIRECTION('',(0.,0.,1.)); +#54575 = ORIENTED_EDGE('',*,*,#54381,.F.); +#54576 = PLANE('',#54577); +#54577 = AXIS2_PLACEMENT_3D('',#54578,#54579,#54580); +#54578 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54579 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54580 = DIRECTION('',(-4.4E-16,1.,0.)); +#54581 = ADVANCED_FACE('',(#54582),#54600,.F.); +#54582 = FACE_BOUND('',#54583,.T.); +#54583 = EDGE_LOOP('',(#54584,#54585,#54593,#54599)); +#54584 = ORIENTED_EDGE('',*,*,#54373,.F.); +#54585 = ORIENTED_EDGE('',*,*,#54586,.T.); +#54586 = EDGE_CURVE('',#54365,#54587,#54589,.T.); +#54587 = VERTEX_POINT('',#54588); +#54588 = CARTESIAN_POINT('',(6.71,-12.75,0.4)); +#54589 = LINE('',#54590,#54591); +#54590 = CARTESIAN_POINT('',(6.71,-12.75,0.8)); +#54591 = VECTOR('',#54592,1.); +#54592 = DIRECTION('',(0.,0.,1.)); +#54593 = ORIENTED_EDGE('',*,*,#54594,.T.); +#54594 = EDGE_CURVE('',#54587,#54563,#54595,.T.); +#54595 = LINE('',#54596,#54597); +#54596 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54597 = VECTOR('',#54598,1.); +#54598 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54599 = ORIENTED_EDGE('',*,*,#54570,.F.); +#54600 = PLANE('',#54601); +#54601 = AXIS2_PLACEMENT_3D('',#54602,#54603,#54604); +#54602 = CARTESIAN_POINT('',(7.435,-12.75,0.)); +#54603 = DIRECTION('',(-4.4E-16,1.,0.)); +#54604 = DIRECTION('',(1.,4.4E-16,0.)); +#54605 = ADVANCED_FACE('',(#54606),#54626,.F.); +#54606 = FACE_BOUND('',#54607,.F.); +#54607 = EDGE_LOOP('',(#54608,#54609,#54610,#54618,#54625)); +#54608 = ORIENTED_EDGE('',*,*,#54364,.F.); +#54609 = ORIENTED_EDGE('',*,*,#54586,.T.); +#54610 = ORIENTED_EDGE('',*,*,#54611,.T.); +#54611 = EDGE_CURVE('',#54587,#54612,#54614,.T.); +#54612 = VERTEX_POINT('',#54613); +#54613 = CARTESIAN_POINT('',(6.71,-12.75,0.8)); +#54614 = LINE('',#54615,#54616); +#54615 = CARTESIAN_POINT('',(6.71,-12.75,0.8)); +#54616 = VECTOR('',#54617,1.); +#54617 = DIRECTION('',(0.,0.,1.)); +#54618 = ORIENTED_EDGE('',*,*,#54619,.T.); +#54619 = EDGE_CURVE('',#54612,#54445,#54620,.T.); +#54620 = CIRCLE('',#54621,0.275); +#54621 = AXIS2_PLACEMENT_3D('',#54622,#54623,#54624); +#54622 = CARTESIAN_POINT('',(6.985,-12.75,0.8)); +#54623 = DIRECTION('',(0.,0.,-1.)); +#54624 = DIRECTION('',(-4.4E-16,1.,0.)); +#54625 = ORIENTED_EDGE('',*,*,#54444,.T.); +#54626 = CYLINDRICAL_SURFACE('',#54627,0.275); +#54627 = AXIS2_PLACEMENT_3D('',#54628,#54629,#54630); +#54628 = CARTESIAN_POINT('',(6.985,-12.75,0.8)); +#54629 = DIRECTION('',(0.,0.,1.)); +#54630 = DIRECTION('',(-4.4E-16,1.,0.)); +#54631 = ADVANCED_FACE('',(#54632),#54650,.T.); +#54632 = FACE_BOUND('',#54633,.F.); +#54633 = EDGE_LOOP('',(#54634,#54635,#54643,#54649)); +#54634 = ORIENTED_EDGE('',*,*,#54419,.T.); +#54635 = ORIENTED_EDGE('',*,*,#54636,.T.); +#54636 = EDGE_CURVE('',#54412,#54637,#54639,.T.); +#54637 = VERTEX_POINT('',#54638); +#54638 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#54639 = LINE('',#54640,#54641); +#54640 = CARTESIAN_POINT('',(7.435,-12.3,0.8)); +#54641 = VECTOR('',#54642,1.); +#54642 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54643 = ORIENTED_EDGE('',*,*,#54644,.F.); +#54644 = EDGE_CURVE('',#54518,#54637,#54645,.T.); +#54645 = LINE('',#54646,#54647); +#54646 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#54647 = VECTOR('',#54648,1.); +#54648 = DIRECTION('',(0.,0.,1.)); +#54649 = ORIENTED_EDGE('',*,*,#54525,.F.); +#54650 = PLANE('',#54651); +#54651 = AXIS2_PLACEMENT_3D('',#54652,#54653,#54654); +#54652 = CARTESIAN_POINT('',(7.435,-12.3,0.4)); +#54653 = DIRECTION('',(-4.4E-16,1.,0.)); +#54654 = DIRECTION('',(1.,4.4E-16,0.)); +#54655 = ADVANCED_FACE('',(#54656),#54677,.T.); +#54656 = FACE_BOUND('',#54657,.F.); +#54657 = EDGE_LOOP('',(#54658,#54659,#54660,#54661,#54662,#54670,#54676) + ); +#54658 = ORIENTED_EDGE('',*,*,#54411,.F.); +#54659 = ORIENTED_EDGE('',*,*,#54469,.T.); +#54660 = ORIENTED_EDGE('',*,*,#54452,.F.); +#54661 = ORIENTED_EDGE('',*,*,#54619,.F.); +#54662 = ORIENTED_EDGE('',*,*,#54663,.T.); +#54663 = EDGE_CURVE('',#54612,#54664,#54666,.T.); +#54664 = VERTEX_POINT('',#54665); +#54665 = CARTESIAN_POINT('',(6.535,-12.75,0.8)); +#54666 = LINE('',#54667,#54668); +#54667 = CARTESIAN_POINT('',(7.435,-12.75,0.8)); +#54668 = VECTOR('',#54669,1.); +#54669 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54670 = ORIENTED_EDGE('',*,*,#54671,.F.); +#54671 = EDGE_CURVE('',#54637,#54664,#54672,.T.); +#54672 = LINE('',#54673,#54674); +#54673 = CARTESIAN_POINT('',(6.535,-12.3,0.8)); +#54674 = VECTOR('',#54675,1.); +#54675 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54676 = ORIENTED_EDGE('',*,*,#54636,.F.); +#54677 = PLANE('',#54678); +#54678 = AXIS2_PLACEMENT_3D('',#54679,#54680,#54681); +#54679 = CARTESIAN_POINT('',(6.985,-12.525,0.8)); +#54680 = DIRECTION('',(0.,0.,1.)); +#54681 = DIRECTION('',(4.4E-16,-1.,0.)); +#54682 = ADVANCED_FACE('',(#54683),#54689,.T.); +#54683 = FACE_BOUND('',#54684,.F.); +#54684 = EDGE_LOOP('',(#54685,#54686,#54687,#54688)); +#54685 = ORIENTED_EDGE('',*,*,#54493,.T.); +#54686 = ORIENTED_EDGE('',*,*,#54541,.T.); +#54687 = ORIENTED_EDGE('',*,*,#54517,.F.); +#54688 = ORIENTED_EDGE('',*,*,#54556,.F.); +#54689 = PLANE('',#54690); +#54690 = AXIS2_PLACEMENT_3D('',#54691,#54692,#54693); +#54691 = CARTESIAN_POINT('',(6.535,-12.3,0.)); +#54692 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54693 = DIRECTION('',(0.,-0.,-1.)); +#54694 = ADVANCED_FACE('',(#54695),#54706,.T.); +#54695 = FACE_BOUND('',#54696,.F.); +#54696 = EDGE_LOOP('',(#54697,#54698,#54699,#54705)); +#54697 = ORIENTED_EDGE('',*,*,#54644,.T.); +#54698 = ORIENTED_EDGE('',*,*,#54671,.T.); +#54699 = ORIENTED_EDGE('',*,*,#54700,.F.); +#54700 = EDGE_CURVE('',#54563,#54664,#54701,.T.); +#54701 = LINE('',#54702,#54703); +#54702 = CARTESIAN_POINT('',(6.535,-12.75,0.4)); +#54703 = VECTOR('',#54704,1.); +#54704 = DIRECTION('',(0.,0.,1.)); +#54705 = ORIENTED_EDGE('',*,*,#54562,.F.); +#54706 = PLANE('',#54707); +#54707 = AXIS2_PLACEMENT_3D('',#54708,#54709,#54710); +#54708 = CARTESIAN_POINT('',(6.535,-12.3,0.4)); +#54709 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54710 = DIRECTION('',(-4.4E-16,1.,0.)); +#54711 = ADVANCED_FACE('',(#54712),#54718,.F.); +#54712 = FACE_BOUND('',#54713,.T.); +#54713 = EDGE_LOOP('',(#54714,#54715,#54716,#54717)); +#54714 = ORIENTED_EDGE('',*,*,#54594,.F.); +#54715 = ORIENTED_EDGE('',*,*,#54611,.T.); +#54716 = ORIENTED_EDGE('',*,*,#54663,.T.); +#54717 = ORIENTED_EDGE('',*,*,#54700,.F.); +#54718 = PLANE('',#54719); +#54719 = AXIS2_PLACEMENT_3D('',#54720,#54721,#54722); +#54720 = CARTESIAN_POINT('',(7.435,-12.75,0.4)); +#54721 = DIRECTION('',(-4.4E-16,1.,0.)); +#54722 = DIRECTION('',(1.,4.4E-16,0.)); +#54723 = MANIFOLD_SOLID_BREP('',#54724); +#54724 = CLOSED_SHELL('',(#54725,#54765,#54796,#54827,#54877,#54908, + #54941,#54958,#54982,#55013,#55030,#55059,#55083,#55109,#55133, + #55160,#55172,#55189)); +#54725 = ADVANCED_FACE('',(#54726),#54760,.T.); +#54726 = FACE_BOUND('',#54727,.F.); +#54727 = EDGE_LOOP('',(#54728,#54738,#54746,#54754)); +#54728 = ORIENTED_EDGE('',*,*,#54729,.T.); +#54729 = EDGE_CURVE('',#54730,#54732,#54734,.T.); +#54730 = VERTEX_POINT('',#54731); +#54731 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54732 = VERTEX_POINT('',#54733); +#54733 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54734 = LINE('',#54735,#54736); +#54735 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54736 = VECTOR('',#54737,1.); +#54737 = DIRECTION('',(0.,0.,1.)); +#54738 = ORIENTED_EDGE('',*,*,#54739,.T.); +#54739 = EDGE_CURVE('',#54732,#54740,#54742,.T.); +#54740 = VERTEX_POINT('',#54741); +#54741 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#54742 = LINE('',#54743,#54744); +#54743 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54744 = VECTOR('',#54745,1.); +#54745 = DIRECTION('',(-4.4E-16,1.,0.)); +#54746 = ORIENTED_EDGE('',*,*,#54747,.F.); +#54747 = EDGE_CURVE('',#54748,#54740,#54750,.T.); +#54748 = VERTEX_POINT('',#54749); +#54749 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54750 = LINE('',#54751,#54752); +#54751 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54752 = VECTOR('',#54753,1.); +#54753 = DIRECTION('',(0.,0.,1.)); +#54754 = ORIENTED_EDGE('',*,*,#54755,.F.); +#54755 = EDGE_CURVE('',#54730,#54748,#54756,.T.); +#54756 = LINE('',#54757,#54758); +#54757 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54758 = VECTOR('',#54759,1.); +#54759 = DIRECTION('',(-4.4E-16,1.,0.)); +#54760 = PLANE('',#54761); +#54761 = AXIS2_PLACEMENT_3D('',#54762,#54763,#54764); +#54762 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54763 = DIRECTION('',(1.,4.4E-16,0.)); +#54764 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54765 = ADVANCED_FACE('',(#54766),#54791,.F.); +#54766 = FACE_BOUND('',#54767,.T.); +#54767 = EDGE_LOOP('',(#54768,#54776,#54777,#54785)); +#54768 = ORIENTED_EDGE('',*,*,#54769,.F.); +#54769 = EDGE_CURVE('',#54730,#54770,#54772,.T.); +#54770 = VERTEX_POINT('',#54771); +#54771 = CARTESIAN_POINT('',(5.99,-12.75,0.)); +#54772 = LINE('',#54773,#54774); +#54773 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54774 = VECTOR('',#54775,1.); +#54775 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54776 = ORIENTED_EDGE('',*,*,#54729,.T.); +#54777 = ORIENTED_EDGE('',*,*,#54778,.T.); +#54778 = EDGE_CURVE('',#54732,#54779,#54781,.T.); +#54779 = VERTEX_POINT('',#54780); +#54780 = CARTESIAN_POINT('',(5.99,-12.75,0.4)); +#54781 = LINE('',#54782,#54783); +#54782 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54783 = VECTOR('',#54784,1.); +#54784 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54785 = ORIENTED_EDGE('',*,*,#54786,.F.); +#54786 = EDGE_CURVE('',#54770,#54779,#54787,.T.); +#54787 = LINE('',#54788,#54789); +#54788 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#54789 = VECTOR('',#54790,1.); +#54790 = DIRECTION('',(0.,0.,1.)); +#54791 = PLANE('',#54792); +#54792 = AXIS2_PLACEMENT_3D('',#54793,#54794,#54795); +#54793 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54794 = DIRECTION('',(-4.4E-16,1.,0.)); +#54795 = DIRECTION('',(1.,4.4E-16,0.)); +#54796 = ADVANCED_FACE('',(#54797),#54822,.F.); +#54797 = FACE_BOUND('',#54798,.T.); +#54798 = EDGE_LOOP('',(#54799,#54807,#54815,#54821)); +#54799 = ORIENTED_EDGE('',*,*,#54800,.T.); +#54800 = EDGE_CURVE('',#54748,#54801,#54803,.T.); +#54801 = VERTEX_POINT('',#54802); +#54802 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#54803 = LINE('',#54804,#54805); +#54804 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54805 = VECTOR('',#54806,1.); +#54806 = DIRECTION('',(-4.4E-16,1.,0.)); +#54807 = ORIENTED_EDGE('',*,*,#54808,.T.); +#54808 = EDGE_CURVE('',#54801,#54809,#54811,.T.); +#54809 = VERTEX_POINT('',#54810); +#54810 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#54811 = LINE('',#54812,#54813); +#54812 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#54813 = VECTOR('',#54814,1.); +#54814 = DIRECTION('',(0.,0.,1.)); +#54815 = ORIENTED_EDGE('',*,*,#54816,.F.); +#54816 = EDGE_CURVE('',#54740,#54809,#54817,.T.); +#54817 = LINE('',#54818,#54819); +#54818 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#54819 = VECTOR('',#54820,1.); +#54820 = DIRECTION('',(-4.4E-16,1.,0.)); +#54821 = ORIENTED_EDGE('',*,*,#54747,.F.); +#54822 = PLANE('',#54823); +#54823 = AXIS2_PLACEMENT_3D('',#54824,#54825,#54826); +#54824 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54825 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54826 = DIRECTION('',(0.,-0.,-1.)); +#54827 = ADVANCED_FACE('',(#54828),#54872,.F.); +#54828 = FACE_BOUND('',#54829,.T.); +#54829 = EDGE_LOOP('',(#54830,#54831,#54832,#54841,#54850,#54858,#54866) + ); +#54830 = ORIENTED_EDGE('',*,*,#54755,.F.); +#54831 = ORIENTED_EDGE('',*,*,#54769,.T.); +#54832 = ORIENTED_EDGE('',*,*,#54833,.F.); +#54833 = EDGE_CURVE('',#54834,#54770,#54836,.T.); +#54834 = VERTEX_POINT('',#54835); +#54835 = CARTESIAN_POINT('',(5.715,-12.475,0.)); +#54836 = CIRCLE('',#54837,0.275); +#54837 = AXIS2_PLACEMENT_3D('',#54838,#54839,#54840); +#54838 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#54839 = DIRECTION('',(0.,0.,-1.)); +#54840 = DIRECTION('',(-4.4E-16,1.,0.)); +#54841 = ORIENTED_EDGE('',*,*,#54842,.F.); +#54842 = EDGE_CURVE('',#54843,#54834,#54845,.T.); +#54843 = VERTEX_POINT('',#54844); +#54844 = CARTESIAN_POINT('',(5.44,-12.75,0.)); +#54845 = CIRCLE('',#54846,0.275); +#54846 = AXIS2_PLACEMENT_3D('',#54847,#54848,#54849); +#54847 = CARTESIAN_POINT('',(5.715,-12.75,0.)); +#54848 = DIRECTION('',(0.,0.,-1.)); +#54849 = DIRECTION('',(-4.4E-16,1.,0.)); +#54850 = ORIENTED_EDGE('',*,*,#54851,.T.); +#54851 = EDGE_CURVE('',#54843,#54852,#54854,.T.); +#54852 = VERTEX_POINT('',#54853); +#54853 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#54854 = LINE('',#54855,#54856); +#54855 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#54856 = VECTOR('',#54857,1.); +#54857 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54858 = ORIENTED_EDGE('',*,*,#54859,.F.); +#54859 = EDGE_CURVE('',#54860,#54852,#54862,.T.); +#54860 = VERTEX_POINT('',#54861); +#54861 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#54862 = LINE('',#54863,#54864); +#54863 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#54864 = VECTOR('',#54865,1.); +#54865 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54866 = ORIENTED_EDGE('',*,*,#54867,.F.); +#54867 = EDGE_CURVE('',#54748,#54860,#54868,.T.); +#54868 = LINE('',#54869,#54870); +#54869 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54870 = VECTOR('',#54871,1.); +#54871 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54872 = PLANE('',#54873); +#54873 = AXIS2_PLACEMENT_3D('',#54874,#54875,#54876); +#54874 = CARTESIAN_POINT('',(5.715,-12.525,0.)); +#54875 = DIRECTION('',(0.,0.,1.)); +#54876 = DIRECTION('',(4.4E-16,-1.,0.)); +#54877 = ADVANCED_FACE('',(#54878),#54903,.T.); +#54878 = FACE_BOUND('',#54879,.F.); +#54879 = EDGE_LOOP('',(#54880,#54888,#54896,#54902)); +#54880 = ORIENTED_EDGE('',*,*,#54881,.T.); +#54881 = EDGE_CURVE('',#54732,#54882,#54884,.T.); +#54882 = VERTEX_POINT('',#54883); +#54883 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#54884 = LINE('',#54885,#54886); +#54885 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54886 = VECTOR('',#54887,1.); +#54887 = DIRECTION('',(0.,0.,1.)); +#54888 = ORIENTED_EDGE('',*,*,#54889,.T.); +#54889 = EDGE_CURVE('',#54882,#54890,#54892,.T.); +#54890 = VERTEX_POINT('',#54891); +#54891 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#54892 = LINE('',#54893,#54894); +#54893 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#54894 = VECTOR('',#54895,1.); +#54895 = DIRECTION('',(-4.4E-16,1.,0.)); +#54896 = ORIENTED_EDGE('',*,*,#54897,.F.); +#54897 = EDGE_CURVE('',#54740,#54890,#54898,.T.); +#54898 = LINE('',#54899,#54900); +#54899 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#54900 = VECTOR('',#54901,1.); +#54901 = DIRECTION('',(0.,0.,1.)); +#54902 = ORIENTED_EDGE('',*,*,#54739,.F.); +#54903 = PLANE('',#54904); +#54904 = AXIS2_PLACEMENT_3D('',#54905,#54906,#54907); +#54905 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54906 = DIRECTION('',(1.,4.4E-16,0.)); +#54907 = DIRECTION('',(4.4E-16,-1.,-0.)); +#54908 = ADVANCED_FACE('',(#54909),#54936,.F.); +#54909 = FACE_BOUND('',#54910,.F.); +#54910 = EDGE_LOOP('',(#54911,#54919,#54920,#54921,#54929)); +#54911 = ORIENTED_EDGE('',*,*,#54912,.F.); +#54912 = EDGE_CURVE('',#54779,#54913,#54915,.T.); +#54913 = VERTEX_POINT('',#54914); +#54914 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#54915 = LINE('',#54916,#54917); +#54916 = CARTESIAN_POINT('',(5.99,-12.75,0.8)); +#54917 = VECTOR('',#54918,1.); +#54918 = DIRECTION('',(0.,0.,1.)); +#54919 = ORIENTED_EDGE('',*,*,#54786,.F.); +#54920 = ORIENTED_EDGE('',*,*,#54833,.F.); +#54921 = ORIENTED_EDGE('',*,*,#54922,.F.); +#54922 = EDGE_CURVE('',#54923,#54834,#54925,.T.); +#54923 = VERTEX_POINT('',#54924); +#54924 = CARTESIAN_POINT('',(5.715,-12.475,0.8)); +#54925 = LINE('',#54926,#54927); +#54926 = CARTESIAN_POINT('',(5.715,-12.475,0.8)); +#54927 = VECTOR('',#54928,1.); +#54928 = DIRECTION('',(0.,-0.,-1.)); +#54929 = ORIENTED_EDGE('',*,*,#54930,.T.); +#54930 = EDGE_CURVE('',#54923,#54913,#54931,.T.); +#54931 = CIRCLE('',#54932,0.275); +#54932 = AXIS2_PLACEMENT_3D('',#54933,#54934,#54935); +#54933 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#54934 = DIRECTION('',(0.,0.,-1.)); +#54935 = DIRECTION('',(-4.4E-16,1.,0.)); +#54936 = CYLINDRICAL_SURFACE('',#54937,0.275); +#54937 = AXIS2_PLACEMENT_3D('',#54938,#54939,#54940); +#54938 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#54939 = DIRECTION('',(0.,0.,1.)); +#54940 = DIRECTION('',(-4.4E-16,1.,0.)); +#54941 = ADVANCED_FACE('',(#54942),#54953,.F.); +#54942 = FACE_BOUND('',#54943,.T.); +#54943 = EDGE_LOOP('',(#54944,#54945,#54946,#54952)); +#54944 = ORIENTED_EDGE('',*,*,#54778,.F.); +#54945 = ORIENTED_EDGE('',*,*,#54881,.T.); +#54946 = ORIENTED_EDGE('',*,*,#54947,.T.); +#54947 = EDGE_CURVE('',#54882,#54913,#54948,.T.); +#54948 = LINE('',#54949,#54950); +#54949 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#54950 = VECTOR('',#54951,1.); +#54951 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54952 = ORIENTED_EDGE('',*,*,#54912,.F.); +#54953 = PLANE('',#54954); +#54954 = AXIS2_PLACEMENT_3D('',#54955,#54956,#54957); +#54955 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#54956 = DIRECTION('',(-4.4E-16,1.,0.)); +#54957 = DIRECTION('',(1.,4.4E-16,0.)); +#54958 = ADVANCED_FACE('',(#54959),#54977,.T.); +#54959 = FACE_BOUND('',#54960,.F.); +#54960 = EDGE_LOOP('',(#54961,#54962,#54970,#54976)); +#54961 = ORIENTED_EDGE('',*,*,#54800,.T.); +#54962 = ORIENTED_EDGE('',*,*,#54963,.T.); +#54963 = EDGE_CURVE('',#54801,#54964,#54966,.T.); +#54964 = VERTEX_POINT('',#54965); +#54965 = CARTESIAN_POINT('',(5.265,-11.9,0.)); +#54966 = LINE('',#54967,#54968); +#54967 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#54968 = VECTOR('',#54969,1.); +#54969 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54970 = ORIENTED_EDGE('',*,*,#54971,.F.); +#54971 = EDGE_CURVE('',#54860,#54964,#54972,.T.); +#54972 = LINE('',#54973,#54974); +#54973 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#54974 = VECTOR('',#54975,1.); +#54975 = DIRECTION('',(-4.4E-16,1.,0.)); +#54976 = ORIENTED_EDGE('',*,*,#54867,.F.); +#54977 = PLANE('',#54978); +#54978 = AXIS2_PLACEMENT_3D('',#54979,#54980,#54981); +#54979 = CARTESIAN_POINT('',(6.165,-12.3,0.)); +#54980 = DIRECTION('',(0.,0.,-1.)); +#54981 = DIRECTION('',(1.,4.4E-16,0.)); +#54982 = ADVANCED_FACE('',(#54983),#55008,.F.); +#54983 = FACE_BOUND('',#54984,.T.); +#54984 = EDGE_LOOP('',(#54985,#54986,#54994,#55002)); +#54985 = ORIENTED_EDGE('',*,*,#54816,.T.); +#54986 = ORIENTED_EDGE('',*,*,#54987,.T.); +#54987 = EDGE_CURVE('',#54809,#54988,#54990,.T.); +#54988 = VERTEX_POINT('',#54989); +#54989 = CARTESIAN_POINT('',(5.265,-11.9,0.4)); +#54990 = LINE('',#54991,#54992); +#54991 = CARTESIAN_POINT('',(6.165,-11.9,0.4)); +#54992 = VECTOR('',#54993,1.); +#54993 = DIRECTION('',(-1.,-4.4E-16,0.)); +#54994 = ORIENTED_EDGE('',*,*,#54995,.F.); +#54995 = EDGE_CURVE('',#54996,#54988,#54998,.T.); +#54996 = VERTEX_POINT('',#54997); +#54997 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#54998 = LINE('',#54999,#55000); +#54999 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#55000 = VECTOR('',#55001,1.); +#55001 = DIRECTION('',(-4.4E-16,1.,0.)); +#55002 = ORIENTED_EDGE('',*,*,#55003,.F.); +#55003 = EDGE_CURVE('',#54740,#54996,#55004,.T.); +#55004 = LINE('',#55005,#55006); +#55005 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#55006 = VECTOR('',#55007,1.); +#55007 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55008 = PLANE('',#55009); +#55009 = AXIS2_PLACEMENT_3D('',#55010,#55011,#55012); +#55010 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#55011 = DIRECTION('',(0.,0.,-1.)); +#55012 = DIRECTION('',(1.,4.4E-16,0.)); +#55013 = ADVANCED_FACE('',(#55014),#55025,.T.); +#55014 = FACE_BOUND('',#55015,.F.); +#55015 = EDGE_LOOP('',(#55016,#55017,#55018,#55024)); +#55016 = ORIENTED_EDGE('',*,*,#54808,.T.); +#55017 = ORIENTED_EDGE('',*,*,#54987,.T.); +#55018 = ORIENTED_EDGE('',*,*,#55019,.F.); +#55019 = EDGE_CURVE('',#54964,#54988,#55020,.T.); +#55020 = LINE('',#55021,#55022); +#55021 = CARTESIAN_POINT('',(5.265,-11.9,0.)); +#55022 = VECTOR('',#55023,1.); +#55023 = DIRECTION('',(0.,0.,1.)); +#55024 = ORIENTED_EDGE('',*,*,#54963,.F.); +#55025 = PLANE('',#55026); +#55026 = AXIS2_PLACEMENT_3D('',#55027,#55028,#55029); +#55027 = CARTESIAN_POINT('',(6.165,-11.9,0.)); +#55028 = DIRECTION('',(-4.4E-16,1.,0.)); +#55029 = DIRECTION('',(1.,4.4E-16,0.)); +#55030 = ADVANCED_FACE('',(#55031),#55054,.T.); +#55031 = FACE_BOUND('',#55032,.F.); +#55032 = EDGE_LOOP('',(#55033,#55039,#55047,#55053)); +#55033 = ORIENTED_EDGE('',*,*,#55034,.T.); +#55034 = EDGE_CURVE('',#54860,#54996,#55035,.T.); +#55035 = LINE('',#55036,#55037); +#55036 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#55037 = VECTOR('',#55038,1.); +#55038 = DIRECTION('',(0.,0.,1.)); +#55039 = ORIENTED_EDGE('',*,*,#55040,.T.); +#55040 = EDGE_CURVE('',#54996,#55041,#55043,.T.); +#55041 = VERTEX_POINT('',#55042); +#55042 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#55043 = LINE('',#55044,#55045); +#55044 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#55045 = VECTOR('',#55046,1.); +#55046 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55047 = ORIENTED_EDGE('',*,*,#55048,.F.); +#55048 = EDGE_CURVE('',#54852,#55041,#55049,.T.); +#55049 = LINE('',#55050,#55051); +#55050 = CARTESIAN_POINT('',(5.265,-12.75,0.)); +#55051 = VECTOR('',#55052,1.); +#55052 = DIRECTION('',(0.,0.,1.)); +#55053 = ORIENTED_EDGE('',*,*,#54859,.F.); +#55054 = PLANE('',#55055); +#55055 = AXIS2_PLACEMENT_3D('',#55056,#55057,#55058); +#55056 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#55057 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55058 = DIRECTION('',(-4.4E-16,1.,0.)); +#55059 = ADVANCED_FACE('',(#55060),#55078,.F.); +#55060 = FACE_BOUND('',#55061,.T.); +#55061 = EDGE_LOOP('',(#55062,#55063,#55071,#55077)); +#55062 = ORIENTED_EDGE('',*,*,#54851,.F.); +#55063 = ORIENTED_EDGE('',*,*,#55064,.T.); +#55064 = EDGE_CURVE('',#54843,#55065,#55067,.T.); +#55065 = VERTEX_POINT('',#55066); +#55066 = CARTESIAN_POINT('',(5.44,-12.75,0.4)); +#55067 = LINE('',#55068,#55069); +#55068 = CARTESIAN_POINT('',(5.44,-12.75,0.8)); +#55069 = VECTOR('',#55070,1.); +#55070 = DIRECTION('',(0.,0.,1.)); +#55071 = ORIENTED_EDGE('',*,*,#55072,.T.); +#55072 = EDGE_CURVE('',#55065,#55041,#55073,.T.); +#55073 = LINE('',#55074,#55075); +#55074 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#55075 = VECTOR('',#55076,1.); +#55076 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55077 = ORIENTED_EDGE('',*,*,#55048,.F.); +#55078 = PLANE('',#55079); +#55079 = AXIS2_PLACEMENT_3D('',#55080,#55081,#55082); +#55080 = CARTESIAN_POINT('',(6.165,-12.75,0.)); +#55081 = DIRECTION('',(-4.4E-16,1.,0.)); +#55082 = DIRECTION('',(1.,4.4E-16,0.)); +#55083 = ADVANCED_FACE('',(#55084),#55104,.F.); +#55084 = FACE_BOUND('',#55085,.F.); +#55085 = EDGE_LOOP('',(#55086,#55087,#55088,#55096,#55103)); +#55086 = ORIENTED_EDGE('',*,*,#54842,.F.); +#55087 = ORIENTED_EDGE('',*,*,#55064,.T.); +#55088 = ORIENTED_EDGE('',*,*,#55089,.T.); +#55089 = EDGE_CURVE('',#55065,#55090,#55092,.T.); +#55090 = VERTEX_POINT('',#55091); +#55091 = CARTESIAN_POINT('',(5.44,-12.75,0.8)); +#55092 = LINE('',#55093,#55094); +#55093 = CARTESIAN_POINT('',(5.44,-12.75,0.8)); +#55094 = VECTOR('',#55095,1.); +#55095 = DIRECTION('',(0.,0.,1.)); +#55096 = ORIENTED_EDGE('',*,*,#55097,.T.); +#55097 = EDGE_CURVE('',#55090,#54923,#55098,.T.); +#55098 = CIRCLE('',#55099,0.275); +#55099 = AXIS2_PLACEMENT_3D('',#55100,#55101,#55102); +#55100 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#55101 = DIRECTION('',(0.,0.,-1.)); +#55102 = DIRECTION('',(-4.4E-16,1.,0.)); +#55103 = ORIENTED_EDGE('',*,*,#54922,.T.); +#55104 = CYLINDRICAL_SURFACE('',#55105,0.275); +#55105 = AXIS2_PLACEMENT_3D('',#55106,#55107,#55108); +#55106 = CARTESIAN_POINT('',(5.715,-12.75,0.8)); +#55107 = DIRECTION('',(0.,0.,1.)); +#55108 = DIRECTION('',(-4.4E-16,1.,0.)); +#55109 = ADVANCED_FACE('',(#55110),#55128,.T.); +#55110 = FACE_BOUND('',#55111,.F.); +#55111 = EDGE_LOOP('',(#55112,#55113,#55121,#55127)); +#55112 = ORIENTED_EDGE('',*,*,#54897,.T.); +#55113 = ORIENTED_EDGE('',*,*,#55114,.T.); +#55114 = EDGE_CURVE('',#54890,#55115,#55117,.T.); +#55115 = VERTEX_POINT('',#55116); +#55116 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#55117 = LINE('',#55118,#55119); +#55118 = CARTESIAN_POINT('',(6.165,-12.3,0.8)); +#55119 = VECTOR('',#55120,1.); +#55120 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55121 = ORIENTED_EDGE('',*,*,#55122,.F.); +#55122 = EDGE_CURVE('',#54996,#55115,#55123,.T.); +#55123 = LINE('',#55124,#55125); +#55124 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#55125 = VECTOR('',#55126,1.); +#55126 = DIRECTION('',(0.,0.,1.)); +#55127 = ORIENTED_EDGE('',*,*,#55003,.F.); +#55128 = PLANE('',#55129); +#55129 = AXIS2_PLACEMENT_3D('',#55130,#55131,#55132); +#55130 = CARTESIAN_POINT('',(6.165,-12.3,0.4)); +#55131 = DIRECTION('',(-4.4E-16,1.,0.)); +#55132 = DIRECTION('',(1.,4.4E-16,0.)); +#55133 = ADVANCED_FACE('',(#55134),#55155,.T.); +#55134 = FACE_BOUND('',#55135,.F.); +#55135 = EDGE_LOOP('',(#55136,#55137,#55138,#55139,#55140,#55148,#55154) + ); +#55136 = ORIENTED_EDGE('',*,*,#54889,.F.); +#55137 = ORIENTED_EDGE('',*,*,#54947,.T.); +#55138 = ORIENTED_EDGE('',*,*,#54930,.F.); +#55139 = ORIENTED_EDGE('',*,*,#55097,.F.); +#55140 = ORIENTED_EDGE('',*,*,#55141,.T.); +#55141 = EDGE_CURVE('',#55090,#55142,#55144,.T.); +#55142 = VERTEX_POINT('',#55143); +#55143 = CARTESIAN_POINT('',(5.265,-12.75,0.8)); +#55144 = LINE('',#55145,#55146); +#55145 = CARTESIAN_POINT('',(6.165,-12.75,0.8)); +#55146 = VECTOR('',#55147,1.); +#55147 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55148 = ORIENTED_EDGE('',*,*,#55149,.F.); +#55149 = EDGE_CURVE('',#55115,#55142,#55150,.T.); +#55150 = LINE('',#55151,#55152); +#55151 = CARTESIAN_POINT('',(5.265,-12.3,0.8)); +#55152 = VECTOR('',#55153,1.); +#55153 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55154 = ORIENTED_EDGE('',*,*,#55114,.F.); +#55155 = PLANE('',#55156); +#55156 = AXIS2_PLACEMENT_3D('',#55157,#55158,#55159); +#55157 = CARTESIAN_POINT('',(5.715,-12.525,0.8)); +#55158 = DIRECTION('',(0.,0.,1.)); +#55159 = DIRECTION('',(4.4E-16,-1.,0.)); +#55160 = ADVANCED_FACE('',(#55161),#55167,.T.); +#55161 = FACE_BOUND('',#55162,.F.); +#55162 = EDGE_LOOP('',(#55163,#55164,#55165,#55166)); +#55163 = ORIENTED_EDGE('',*,*,#54971,.T.); +#55164 = ORIENTED_EDGE('',*,*,#55019,.T.); +#55165 = ORIENTED_EDGE('',*,*,#54995,.F.); +#55166 = ORIENTED_EDGE('',*,*,#55034,.F.); +#55167 = PLANE('',#55168); +#55168 = AXIS2_PLACEMENT_3D('',#55169,#55170,#55171); +#55169 = CARTESIAN_POINT('',(5.265,-12.3,0.)); +#55170 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55171 = DIRECTION('',(0.,-0.,-1.)); +#55172 = ADVANCED_FACE('',(#55173),#55184,.T.); +#55173 = FACE_BOUND('',#55174,.F.); +#55174 = EDGE_LOOP('',(#55175,#55176,#55177,#55183)); +#55175 = ORIENTED_EDGE('',*,*,#55122,.T.); +#55176 = ORIENTED_EDGE('',*,*,#55149,.T.); +#55177 = ORIENTED_EDGE('',*,*,#55178,.F.); +#55178 = EDGE_CURVE('',#55041,#55142,#55179,.T.); +#55179 = LINE('',#55180,#55181); +#55180 = CARTESIAN_POINT('',(5.265,-12.75,0.4)); +#55181 = VECTOR('',#55182,1.); +#55182 = DIRECTION('',(0.,0.,1.)); +#55183 = ORIENTED_EDGE('',*,*,#55040,.F.); +#55184 = PLANE('',#55185); +#55185 = AXIS2_PLACEMENT_3D('',#55186,#55187,#55188); +#55186 = CARTESIAN_POINT('',(5.265,-12.3,0.4)); +#55187 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55188 = DIRECTION('',(-4.4E-16,1.,0.)); +#55189 = ADVANCED_FACE('',(#55190),#55196,.F.); +#55190 = FACE_BOUND('',#55191,.T.); +#55191 = EDGE_LOOP('',(#55192,#55193,#55194,#55195)); +#55192 = ORIENTED_EDGE('',*,*,#55072,.F.); +#55193 = ORIENTED_EDGE('',*,*,#55089,.T.); +#55194 = ORIENTED_EDGE('',*,*,#55141,.T.); +#55195 = ORIENTED_EDGE('',*,*,#55178,.F.); +#55196 = PLANE('',#55197); +#55197 = AXIS2_PLACEMENT_3D('',#55198,#55199,#55200); +#55198 = CARTESIAN_POINT('',(6.165,-12.75,0.4)); +#55199 = DIRECTION('',(-4.4E-16,1.,0.)); +#55200 = DIRECTION('',(1.,4.4E-16,0.)); +#55201 = MANIFOLD_SOLID_BREP('',#55202); +#55202 = CLOSED_SHELL('',(#55203,#55243,#55274,#55305,#55355,#55386, + #55419,#55436,#55460,#55491,#55508,#55537,#55561,#55587,#55611, + #55638,#55650,#55667)); +#55203 = ADVANCED_FACE('',(#55204),#55238,.T.); +#55204 = FACE_BOUND('',#55205,.F.); +#55205 = EDGE_LOOP('',(#55206,#55216,#55224,#55232)); +#55206 = ORIENTED_EDGE('',*,*,#55207,.T.); +#55207 = EDGE_CURVE('',#55208,#55210,#55212,.T.); +#55208 = VERTEX_POINT('',#55209); +#55209 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55210 = VERTEX_POINT('',#55211); +#55211 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55212 = LINE('',#55213,#55214); +#55213 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55214 = VECTOR('',#55215,1.); +#55215 = DIRECTION('',(0.,0.,1.)); +#55216 = ORIENTED_EDGE('',*,*,#55217,.T.); +#55217 = EDGE_CURVE('',#55210,#55218,#55220,.T.); +#55218 = VERTEX_POINT('',#55219); +#55219 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55220 = LINE('',#55221,#55222); +#55221 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55222 = VECTOR('',#55223,1.); +#55223 = DIRECTION('',(-4.4E-16,1.,0.)); +#55224 = ORIENTED_EDGE('',*,*,#55225,.F.); +#55225 = EDGE_CURVE('',#55226,#55218,#55228,.T.); +#55226 = VERTEX_POINT('',#55227); +#55227 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55228 = LINE('',#55229,#55230); +#55229 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55230 = VECTOR('',#55231,1.); +#55231 = DIRECTION('',(0.,0.,1.)); +#55232 = ORIENTED_EDGE('',*,*,#55233,.F.); +#55233 = EDGE_CURVE('',#55208,#55226,#55234,.T.); +#55234 = LINE('',#55235,#55236); +#55235 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55236 = VECTOR('',#55237,1.); +#55237 = DIRECTION('',(-4.4E-16,1.,0.)); +#55238 = PLANE('',#55239); +#55239 = AXIS2_PLACEMENT_3D('',#55240,#55241,#55242); +#55240 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55241 = DIRECTION('',(1.,4.4E-16,0.)); +#55242 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55243 = ADVANCED_FACE('',(#55244),#55269,.F.); +#55244 = FACE_BOUND('',#55245,.T.); +#55245 = EDGE_LOOP('',(#55246,#55254,#55255,#55263)); +#55246 = ORIENTED_EDGE('',*,*,#55247,.F.); +#55247 = EDGE_CURVE('',#55208,#55248,#55250,.T.); +#55248 = VERTEX_POINT('',#55249); +#55249 = CARTESIAN_POINT('',(4.72,-12.75,0.)); +#55250 = LINE('',#55251,#55252); +#55251 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55252 = VECTOR('',#55253,1.); +#55253 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55254 = ORIENTED_EDGE('',*,*,#55207,.T.); +#55255 = ORIENTED_EDGE('',*,*,#55256,.T.); +#55256 = EDGE_CURVE('',#55210,#55257,#55259,.T.); +#55257 = VERTEX_POINT('',#55258); +#55258 = CARTESIAN_POINT('',(4.72,-12.75,0.4)); +#55259 = LINE('',#55260,#55261); +#55260 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55261 = VECTOR('',#55262,1.); +#55262 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55263 = ORIENTED_EDGE('',*,*,#55264,.F.); +#55264 = EDGE_CURVE('',#55248,#55257,#55265,.T.); +#55265 = LINE('',#55266,#55267); +#55266 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#55267 = VECTOR('',#55268,1.); +#55268 = DIRECTION('',(0.,0.,1.)); +#55269 = PLANE('',#55270); +#55270 = AXIS2_PLACEMENT_3D('',#55271,#55272,#55273); +#55271 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55272 = DIRECTION('',(-4.4E-16,1.,0.)); +#55273 = DIRECTION('',(1.,4.4E-16,0.)); +#55274 = ADVANCED_FACE('',(#55275),#55300,.F.); +#55275 = FACE_BOUND('',#55276,.T.); +#55276 = EDGE_LOOP('',(#55277,#55285,#55293,#55299)); +#55277 = ORIENTED_EDGE('',*,*,#55278,.T.); +#55278 = EDGE_CURVE('',#55226,#55279,#55281,.T.); +#55279 = VERTEX_POINT('',#55280); +#55280 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#55281 = LINE('',#55282,#55283); +#55282 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55283 = VECTOR('',#55284,1.); +#55284 = DIRECTION('',(-4.4E-16,1.,0.)); +#55285 = ORIENTED_EDGE('',*,*,#55286,.T.); +#55286 = EDGE_CURVE('',#55279,#55287,#55289,.T.); +#55287 = VERTEX_POINT('',#55288); +#55288 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#55289 = LINE('',#55290,#55291); +#55290 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#55291 = VECTOR('',#55292,1.); +#55292 = DIRECTION('',(0.,0.,1.)); +#55293 = ORIENTED_EDGE('',*,*,#55294,.F.); +#55294 = EDGE_CURVE('',#55218,#55287,#55295,.T.); +#55295 = LINE('',#55296,#55297); +#55296 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55297 = VECTOR('',#55298,1.); +#55298 = DIRECTION('',(-4.4E-16,1.,0.)); +#55299 = ORIENTED_EDGE('',*,*,#55225,.F.); +#55300 = PLANE('',#55301); +#55301 = AXIS2_PLACEMENT_3D('',#55302,#55303,#55304); +#55302 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55303 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55304 = DIRECTION('',(0.,-0.,-1.)); +#55305 = ADVANCED_FACE('',(#55306),#55350,.F.); +#55306 = FACE_BOUND('',#55307,.T.); +#55307 = EDGE_LOOP('',(#55308,#55309,#55310,#55319,#55328,#55336,#55344) + ); +#55308 = ORIENTED_EDGE('',*,*,#55233,.F.); +#55309 = ORIENTED_EDGE('',*,*,#55247,.T.); +#55310 = ORIENTED_EDGE('',*,*,#55311,.F.); +#55311 = EDGE_CURVE('',#55312,#55248,#55314,.T.); +#55312 = VERTEX_POINT('',#55313); +#55313 = CARTESIAN_POINT('',(4.445,-12.475,0.)); +#55314 = CIRCLE('',#55315,0.275); +#55315 = AXIS2_PLACEMENT_3D('',#55316,#55317,#55318); +#55316 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#55317 = DIRECTION('',(0.,0.,-1.)); +#55318 = DIRECTION('',(-4.4E-16,1.,0.)); +#55319 = ORIENTED_EDGE('',*,*,#55320,.F.); +#55320 = EDGE_CURVE('',#55321,#55312,#55323,.T.); +#55321 = VERTEX_POINT('',#55322); +#55322 = CARTESIAN_POINT('',(4.17,-12.75,0.)); +#55323 = CIRCLE('',#55324,0.275); +#55324 = AXIS2_PLACEMENT_3D('',#55325,#55326,#55327); +#55325 = CARTESIAN_POINT('',(4.445,-12.75,0.)); +#55326 = DIRECTION('',(0.,0.,-1.)); +#55327 = DIRECTION('',(-4.4E-16,1.,0.)); +#55328 = ORIENTED_EDGE('',*,*,#55329,.T.); +#55329 = EDGE_CURVE('',#55321,#55330,#55332,.T.); +#55330 = VERTEX_POINT('',#55331); +#55331 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#55332 = LINE('',#55333,#55334); +#55333 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55334 = VECTOR('',#55335,1.); +#55335 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55336 = ORIENTED_EDGE('',*,*,#55337,.F.); +#55337 = EDGE_CURVE('',#55338,#55330,#55340,.T.); +#55338 = VERTEX_POINT('',#55339); +#55339 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55340 = LINE('',#55341,#55342); +#55341 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55342 = VECTOR('',#55343,1.); +#55343 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55344 = ORIENTED_EDGE('',*,*,#55345,.F.); +#55345 = EDGE_CURVE('',#55226,#55338,#55346,.T.); +#55346 = LINE('',#55347,#55348); +#55347 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55348 = VECTOR('',#55349,1.); +#55349 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55350 = PLANE('',#55351); +#55351 = AXIS2_PLACEMENT_3D('',#55352,#55353,#55354); +#55352 = CARTESIAN_POINT('',(4.445,-12.525,0.)); +#55353 = DIRECTION('',(0.,0.,1.)); +#55354 = DIRECTION('',(4.4E-16,-1.,0.)); +#55355 = ADVANCED_FACE('',(#55356),#55381,.T.); +#55356 = FACE_BOUND('',#55357,.F.); +#55357 = EDGE_LOOP('',(#55358,#55366,#55374,#55380)); +#55358 = ORIENTED_EDGE('',*,*,#55359,.T.); +#55359 = EDGE_CURVE('',#55210,#55360,#55362,.T.); +#55360 = VERTEX_POINT('',#55361); +#55361 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#55362 = LINE('',#55363,#55364); +#55363 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55364 = VECTOR('',#55365,1.); +#55365 = DIRECTION('',(0.,0.,1.)); +#55366 = ORIENTED_EDGE('',*,*,#55367,.T.); +#55367 = EDGE_CURVE('',#55360,#55368,#55370,.T.); +#55368 = VERTEX_POINT('',#55369); +#55369 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#55370 = LINE('',#55371,#55372); +#55371 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#55372 = VECTOR('',#55373,1.); +#55373 = DIRECTION('',(-4.4E-16,1.,0.)); +#55374 = ORIENTED_EDGE('',*,*,#55375,.F.); +#55375 = EDGE_CURVE('',#55218,#55368,#55376,.T.); +#55376 = LINE('',#55377,#55378); +#55377 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55378 = VECTOR('',#55379,1.); +#55379 = DIRECTION('',(0.,0.,1.)); +#55380 = ORIENTED_EDGE('',*,*,#55217,.F.); +#55381 = PLANE('',#55382); +#55382 = AXIS2_PLACEMENT_3D('',#55383,#55384,#55385); +#55383 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55384 = DIRECTION('',(1.,4.4E-16,0.)); +#55385 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55386 = ADVANCED_FACE('',(#55387),#55414,.F.); +#55387 = FACE_BOUND('',#55388,.F.); +#55388 = EDGE_LOOP('',(#55389,#55397,#55398,#55399,#55407)); +#55389 = ORIENTED_EDGE('',*,*,#55390,.F.); +#55390 = EDGE_CURVE('',#55257,#55391,#55393,.T.); +#55391 = VERTEX_POINT('',#55392); +#55392 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#55393 = LINE('',#55394,#55395); +#55394 = CARTESIAN_POINT('',(4.72,-12.75,0.8)); +#55395 = VECTOR('',#55396,1.); +#55396 = DIRECTION('',(0.,0.,1.)); +#55397 = ORIENTED_EDGE('',*,*,#55264,.F.); +#55398 = ORIENTED_EDGE('',*,*,#55311,.F.); +#55399 = ORIENTED_EDGE('',*,*,#55400,.F.); +#55400 = EDGE_CURVE('',#55401,#55312,#55403,.T.); +#55401 = VERTEX_POINT('',#55402); +#55402 = CARTESIAN_POINT('',(4.445,-12.475,0.8)); +#55403 = LINE('',#55404,#55405); +#55404 = CARTESIAN_POINT('',(4.445,-12.475,0.8)); +#55405 = VECTOR('',#55406,1.); +#55406 = DIRECTION('',(0.,-0.,-1.)); +#55407 = ORIENTED_EDGE('',*,*,#55408,.T.); +#55408 = EDGE_CURVE('',#55401,#55391,#55409,.T.); +#55409 = CIRCLE('',#55410,0.275); +#55410 = AXIS2_PLACEMENT_3D('',#55411,#55412,#55413); +#55411 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#55412 = DIRECTION('',(0.,0.,-1.)); +#55413 = DIRECTION('',(-4.4E-16,1.,0.)); +#55414 = CYLINDRICAL_SURFACE('',#55415,0.275); +#55415 = AXIS2_PLACEMENT_3D('',#55416,#55417,#55418); +#55416 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#55417 = DIRECTION('',(0.,0.,1.)); +#55418 = DIRECTION('',(-4.4E-16,1.,0.)); +#55419 = ADVANCED_FACE('',(#55420),#55431,.F.); +#55420 = FACE_BOUND('',#55421,.T.); +#55421 = EDGE_LOOP('',(#55422,#55423,#55424,#55430)); +#55422 = ORIENTED_EDGE('',*,*,#55256,.F.); +#55423 = ORIENTED_EDGE('',*,*,#55359,.T.); +#55424 = ORIENTED_EDGE('',*,*,#55425,.T.); +#55425 = EDGE_CURVE('',#55360,#55391,#55426,.T.); +#55426 = LINE('',#55427,#55428); +#55427 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#55428 = VECTOR('',#55429,1.); +#55429 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55430 = ORIENTED_EDGE('',*,*,#55390,.F.); +#55431 = PLANE('',#55432); +#55432 = AXIS2_PLACEMENT_3D('',#55433,#55434,#55435); +#55433 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55434 = DIRECTION('',(-4.4E-16,1.,0.)); +#55435 = DIRECTION('',(1.,4.4E-16,0.)); +#55436 = ADVANCED_FACE('',(#55437),#55455,.T.); +#55437 = FACE_BOUND('',#55438,.F.); +#55438 = EDGE_LOOP('',(#55439,#55440,#55448,#55454)); +#55439 = ORIENTED_EDGE('',*,*,#55278,.T.); +#55440 = ORIENTED_EDGE('',*,*,#55441,.T.); +#55441 = EDGE_CURVE('',#55279,#55442,#55444,.T.); +#55442 = VERTEX_POINT('',#55443); +#55443 = CARTESIAN_POINT('',(3.995,-11.9,0.)); +#55444 = LINE('',#55445,#55446); +#55445 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#55446 = VECTOR('',#55447,1.); +#55447 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55448 = ORIENTED_EDGE('',*,*,#55449,.F.); +#55449 = EDGE_CURVE('',#55338,#55442,#55450,.T.); +#55450 = LINE('',#55451,#55452); +#55451 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55452 = VECTOR('',#55453,1.); +#55453 = DIRECTION('',(-4.4E-16,1.,0.)); +#55454 = ORIENTED_EDGE('',*,*,#55345,.F.); +#55455 = PLANE('',#55456); +#55456 = AXIS2_PLACEMENT_3D('',#55457,#55458,#55459); +#55457 = CARTESIAN_POINT('',(4.895,-12.3,0.)); +#55458 = DIRECTION('',(0.,0.,-1.)); +#55459 = DIRECTION('',(1.,4.4E-16,0.)); +#55460 = ADVANCED_FACE('',(#55461),#55486,.F.); +#55461 = FACE_BOUND('',#55462,.T.); +#55462 = EDGE_LOOP('',(#55463,#55464,#55472,#55480)); +#55463 = ORIENTED_EDGE('',*,*,#55294,.T.); +#55464 = ORIENTED_EDGE('',*,*,#55465,.T.); +#55465 = EDGE_CURVE('',#55287,#55466,#55468,.T.); +#55466 = VERTEX_POINT('',#55467); +#55467 = CARTESIAN_POINT('',(3.995,-11.9,0.4)); +#55468 = LINE('',#55469,#55470); +#55469 = CARTESIAN_POINT('',(4.895,-11.9,0.4)); +#55470 = VECTOR('',#55471,1.); +#55471 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55472 = ORIENTED_EDGE('',*,*,#55473,.F.); +#55473 = EDGE_CURVE('',#55474,#55466,#55476,.T.); +#55474 = VERTEX_POINT('',#55475); +#55475 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#55476 = LINE('',#55477,#55478); +#55477 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#55478 = VECTOR('',#55479,1.); +#55479 = DIRECTION('',(-4.4E-16,1.,0.)); +#55480 = ORIENTED_EDGE('',*,*,#55481,.F.); +#55481 = EDGE_CURVE('',#55218,#55474,#55482,.T.); +#55482 = LINE('',#55483,#55484); +#55483 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55484 = VECTOR('',#55485,1.); +#55485 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55486 = PLANE('',#55487); +#55487 = AXIS2_PLACEMENT_3D('',#55488,#55489,#55490); +#55488 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55489 = DIRECTION('',(0.,0.,-1.)); +#55490 = DIRECTION('',(1.,4.4E-16,0.)); +#55491 = ADVANCED_FACE('',(#55492),#55503,.T.); +#55492 = FACE_BOUND('',#55493,.F.); +#55493 = EDGE_LOOP('',(#55494,#55495,#55496,#55502)); +#55494 = ORIENTED_EDGE('',*,*,#55286,.T.); +#55495 = ORIENTED_EDGE('',*,*,#55465,.T.); +#55496 = ORIENTED_EDGE('',*,*,#55497,.F.); +#55497 = EDGE_CURVE('',#55442,#55466,#55498,.T.); +#55498 = LINE('',#55499,#55500); +#55499 = CARTESIAN_POINT('',(3.995,-11.9,0.)); +#55500 = VECTOR('',#55501,1.); +#55501 = DIRECTION('',(0.,0.,1.)); +#55502 = ORIENTED_EDGE('',*,*,#55441,.F.); +#55503 = PLANE('',#55504); +#55504 = AXIS2_PLACEMENT_3D('',#55505,#55506,#55507); +#55505 = CARTESIAN_POINT('',(4.895,-11.9,0.)); +#55506 = DIRECTION('',(-4.4E-16,1.,0.)); +#55507 = DIRECTION('',(1.,4.4E-16,0.)); +#55508 = ADVANCED_FACE('',(#55509),#55532,.T.); +#55509 = FACE_BOUND('',#55510,.F.); +#55510 = EDGE_LOOP('',(#55511,#55517,#55525,#55531)); +#55511 = ORIENTED_EDGE('',*,*,#55512,.T.); +#55512 = EDGE_CURVE('',#55338,#55474,#55513,.T.); +#55513 = LINE('',#55514,#55515); +#55514 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55515 = VECTOR('',#55516,1.); +#55516 = DIRECTION('',(0.,0.,1.)); +#55517 = ORIENTED_EDGE('',*,*,#55518,.T.); +#55518 = EDGE_CURVE('',#55474,#55519,#55521,.T.); +#55519 = VERTEX_POINT('',#55520); +#55520 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#55521 = LINE('',#55522,#55523); +#55522 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#55523 = VECTOR('',#55524,1.); +#55524 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55525 = ORIENTED_EDGE('',*,*,#55526,.F.); +#55526 = EDGE_CURVE('',#55330,#55519,#55527,.T.); +#55527 = LINE('',#55528,#55529); +#55528 = CARTESIAN_POINT('',(3.995,-12.75,0.)); +#55529 = VECTOR('',#55530,1.); +#55530 = DIRECTION('',(0.,0.,1.)); +#55531 = ORIENTED_EDGE('',*,*,#55337,.F.); +#55532 = PLANE('',#55533); +#55533 = AXIS2_PLACEMENT_3D('',#55534,#55535,#55536); +#55534 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55535 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55536 = DIRECTION('',(-4.4E-16,1.,0.)); +#55537 = ADVANCED_FACE('',(#55538),#55556,.F.); +#55538 = FACE_BOUND('',#55539,.T.); +#55539 = EDGE_LOOP('',(#55540,#55541,#55549,#55555)); +#55540 = ORIENTED_EDGE('',*,*,#55329,.F.); +#55541 = ORIENTED_EDGE('',*,*,#55542,.T.); +#55542 = EDGE_CURVE('',#55321,#55543,#55545,.T.); +#55543 = VERTEX_POINT('',#55544); +#55544 = CARTESIAN_POINT('',(4.17,-12.75,0.4)); +#55545 = LINE('',#55546,#55547); +#55546 = CARTESIAN_POINT('',(4.17,-12.75,0.8)); +#55547 = VECTOR('',#55548,1.); +#55548 = DIRECTION('',(0.,0.,1.)); +#55549 = ORIENTED_EDGE('',*,*,#55550,.T.); +#55550 = EDGE_CURVE('',#55543,#55519,#55551,.T.); +#55551 = LINE('',#55552,#55553); +#55552 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55553 = VECTOR('',#55554,1.); +#55554 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55555 = ORIENTED_EDGE('',*,*,#55526,.F.); +#55556 = PLANE('',#55557); +#55557 = AXIS2_PLACEMENT_3D('',#55558,#55559,#55560); +#55558 = CARTESIAN_POINT('',(4.895,-12.75,0.)); +#55559 = DIRECTION('',(-4.4E-16,1.,0.)); +#55560 = DIRECTION('',(1.,4.4E-16,0.)); +#55561 = ADVANCED_FACE('',(#55562),#55582,.F.); +#55562 = FACE_BOUND('',#55563,.F.); +#55563 = EDGE_LOOP('',(#55564,#55565,#55566,#55574,#55581)); +#55564 = ORIENTED_EDGE('',*,*,#55320,.F.); +#55565 = ORIENTED_EDGE('',*,*,#55542,.T.); +#55566 = ORIENTED_EDGE('',*,*,#55567,.T.); +#55567 = EDGE_CURVE('',#55543,#55568,#55570,.T.); +#55568 = VERTEX_POINT('',#55569); +#55569 = CARTESIAN_POINT('',(4.17,-12.75,0.8)); +#55570 = LINE('',#55571,#55572); +#55571 = CARTESIAN_POINT('',(4.17,-12.75,0.8)); +#55572 = VECTOR('',#55573,1.); +#55573 = DIRECTION('',(0.,0.,1.)); +#55574 = ORIENTED_EDGE('',*,*,#55575,.T.); +#55575 = EDGE_CURVE('',#55568,#55401,#55576,.T.); +#55576 = CIRCLE('',#55577,0.275); +#55577 = AXIS2_PLACEMENT_3D('',#55578,#55579,#55580); +#55578 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#55579 = DIRECTION('',(0.,0.,-1.)); +#55580 = DIRECTION('',(-4.4E-16,1.,0.)); +#55581 = ORIENTED_EDGE('',*,*,#55400,.T.); +#55582 = CYLINDRICAL_SURFACE('',#55583,0.275); +#55583 = AXIS2_PLACEMENT_3D('',#55584,#55585,#55586); +#55584 = CARTESIAN_POINT('',(4.445,-12.75,0.8)); +#55585 = DIRECTION('',(0.,0.,1.)); +#55586 = DIRECTION('',(-4.4E-16,1.,0.)); +#55587 = ADVANCED_FACE('',(#55588),#55606,.T.); +#55588 = FACE_BOUND('',#55589,.F.); +#55589 = EDGE_LOOP('',(#55590,#55591,#55599,#55605)); +#55590 = ORIENTED_EDGE('',*,*,#55375,.T.); +#55591 = ORIENTED_EDGE('',*,*,#55592,.T.); +#55592 = EDGE_CURVE('',#55368,#55593,#55595,.T.); +#55593 = VERTEX_POINT('',#55594); +#55594 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#55595 = LINE('',#55596,#55597); +#55596 = CARTESIAN_POINT('',(4.895,-12.3,0.8)); +#55597 = VECTOR('',#55598,1.); +#55598 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55599 = ORIENTED_EDGE('',*,*,#55600,.F.); +#55600 = EDGE_CURVE('',#55474,#55593,#55601,.T.); +#55601 = LINE('',#55602,#55603); +#55602 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#55603 = VECTOR('',#55604,1.); +#55604 = DIRECTION('',(0.,0.,1.)); +#55605 = ORIENTED_EDGE('',*,*,#55481,.F.); +#55606 = PLANE('',#55607); +#55607 = AXIS2_PLACEMENT_3D('',#55608,#55609,#55610); +#55608 = CARTESIAN_POINT('',(4.895,-12.3,0.4)); +#55609 = DIRECTION('',(-4.4E-16,1.,0.)); +#55610 = DIRECTION('',(1.,4.4E-16,0.)); +#55611 = ADVANCED_FACE('',(#55612),#55633,.T.); +#55612 = FACE_BOUND('',#55613,.F.); +#55613 = EDGE_LOOP('',(#55614,#55615,#55616,#55617,#55618,#55626,#55632) + ); +#55614 = ORIENTED_EDGE('',*,*,#55367,.F.); +#55615 = ORIENTED_EDGE('',*,*,#55425,.T.); +#55616 = ORIENTED_EDGE('',*,*,#55408,.F.); +#55617 = ORIENTED_EDGE('',*,*,#55575,.F.); +#55618 = ORIENTED_EDGE('',*,*,#55619,.T.); +#55619 = EDGE_CURVE('',#55568,#55620,#55622,.T.); +#55620 = VERTEX_POINT('',#55621); +#55621 = CARTESIAN_POINT('',(3.995,-12.75,0.8)); +#55622 = LINE('',#55623,#55624); +#55623 = CARTESIAN_POINT('',(4.895,-12.75,0.8)); +#55624 = VECTOR('',#55625,1.); +#55625 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55626 = ORIENTED_EDGE('',*,*,#55627,.F.); +#55627 = EDGE_CURVE('',#55593,#55620,#55628,.T.); +#55628 = LINE('',#55629,#55630); +#55629 = CARTESIAN_POINT('',(3.995,-12.3,0.8)); +#55630 = VECTOR('',#55631,1.); +#55631 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55632 = ORIENTED_EDGE('',*,*,#55592,.F.); +#55633 = PLANE('',#55634); +#55634 = AXIS2_PLACEMENT_3D('',#55635,#55636,#55637); +#55635 = CARTESIAN_POINT('',(4.445,-12.525,0.8)); +#55636 = DIRECTION('',(0.,0.,1.)); +#55637 = DIRECTION('',(4.4E-16,-1.,0.)); +#55638 = ADVANCED_FACE('',(#55639),#55645,.T.); +#55639 = FACE_BOUND('',#55640,.F.); +#55640 = EDGE_LOOP('',(#55641,#55642,#55643,#55644)); +#55641 = ORIENTED_EDGE('',*,*,#55449,.T.); +#55642 = ORIENTED_EDGE('',*,*,#55497,.T.); +#55643 = ORIENTED_EDGE('',*,*,#55473,.F.); +#55644 = ORIENTED_EDGE('',*,*,#55512,.F.); +#55645 = PLANE('',#55646); +#55646 = AXIS2_PLACEMENT_3D('',#55647,#55648,#55649); +#55647 = CARTESIAN_POINT('',(3.995,-12.3,0.)); +#55648 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55649 = DIRECTION('',(0.,-0.,-1.)); +#55650 = ADVANCED_FACE('',(#55651),#55662,.T.); +#55651 = FACE_BOUND('',#55652,.F.); +#55652 = EDGE_LOOP('',(#55653,#55654,#55655,#55661)); +#55653 = ORIENTED_EDGE('',*,*,#55600,.T.); +#55654 = ORIENTED_EDGE('',*,*,#55627,.T.); +#55655 = ORIENTED_EDGE('',*,*,#55656,.F.); +#55656 = EDGE_CURVE('',#55519,#55620,#55657,.T.); +#55657 = LINE('',#55658,#55659); +#55658 = CARTESIAN_POINT('',(3.995,-12.75,0.4)); +#55659 = VECTOR('',#55660,1.); +#55660 = DIRECTION('',(0.,0.,1.)); +#55661 = ORIENTED_EDGE('',*,*,#55518,.F.); +#55662 = PLANE('',#55663); +#55663 = AXIS2_PLACEMENT_3D('',#55664,#55665,#55666); +#55664 = CARTESIAN_POINT('',(3.995,-12.3,0.4)); +#55665 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55666 = DIRECTION('',(-4.4E-16,1.,0.)); +#55667 = ADVANCED_FACE('',(#55668),#55674,.F.); +#55668 = FACE_BOUND('',#55669,.T.); +#55669 = EDGE_LOOP('',(#55670,#55671,#55672,#55673)); +#55670 = ORIENTED_EDGE('',*,*,#55550,.F.); +#55671 = ORIENTED_EDGE('',*,*,#55567,.T.); +#55672 = ORIENTED_EDGE('',*,*,#55619,.T.); +#55673 = ORIENTED_EDGE('',*,*,#55656,.F.); +#55674 = PLANE('',#55675); +#55675 = AXIS2_PLACEMENT_3D('',#55676,#55677,#55678); +#55676 = CARTESIAN_POINT('',(4.895,-12.75,0.4)); +#55677 = DIRECTION('',(-4.4E-16,1.,0.)); +#55678 = DIRECTION('',(1.,4.4E-16,0.)); +#55679 = MANIFOLD_SOLID_BREP('',#55680); +#55680 = CLOSED_SHELL('',(#55681,#55721,#55752,#55783,#55833,#55864, + #55897,#55914,#55938,#55969,#55986,#56015,#56039,#56065,#56089, + #56116,#56128,#56145)); +#55681 = ADVANCED_FACE('',(#55682),#55716,.T.); +#55682 = FACE_BOUND('',#55683,.F.); +#55683 = EDGE_LOOP('',(#55684,#55694,#55702,#55710)); +#55684 = ORIENTED_EDGE('',*,*,#55685,.T.); +#55685 = EDGE_CURVE('',#55686,#55688,#55690,.T.); +#55686 = VERTEX_POINT('',#55687); +#55687 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55688 = VERTEX_POINT('',#55689); +#55689 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55690 = LINE('',#55691,#55692); +#55691 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55692 = VECTOR('',#55693,1.); +#55693 = DIRECTION('',(0.,0.,1.)); +#55694 = ORIENTED_EDGE('',*,*,#55695,.T.); +#55695 = EDGE_CURVE('',#55688,#55696,#55698,.T.); +#55696 = VERTEX_POINT('',#55697); +#55697 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#55698 = LINE('',#55699,#55700); +#55699 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55700 = VECTOR('',#55701,1.); +#55701 = DIRECTION('',(-4.4E-16,1.,0.)); +#55702 = ORIENTED_EDGE('',*,*,#55703,.F.); +#55703 = EDGE_CURVE('',#55704,#55696,#55706,.T.); +#55704 = VERTEX_POINT('',#55705); +#55705 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55706 = LINE('',#55707,#55708); +#55707 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55708 = VECTOR('',#55709,1.); +#55709 = DIRECTION('',(0.,0.,1.)); +#55710 = ORIENTED_EDGE('',*,*,#55711,.F.); +#55711 = EDGE_CURVE('',#55686,#55704,#55712,.T.); +#55712 = LINE('',#55713,#55714); +#55713 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55714 = VECTOR('',#55715,1.); +#55715 = DIRECTION('',(-4.4E-16,1.,0.)); +#55716 = PLANE('',#55717); +#55717 = AXIS2_PLACEMENT_3D('',#55718,#55719,#55720); +#55718 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55719 = DIRECTION('',(1.,4.4E-16,0.)); +#55720 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55721 = ADVANCED_FACE('',(#55722),#55747,.F.); +#55722 = FACE_BOUND('',#55723,.T.); +#55723 = EDGE_LOOP('',(#55724,#55732,#55733,#55741)); +#55724 = ORIENTED_EDGE('',*,*,#55725,.F.); +#55725 = EDGE_CURVE('',#55686,#55726,#55728,.T.); +#55726 = VERTEX_POINT('',#55727); +#55727 = CARTESIAN_POINT('',(3.45,-12.75,0.)); +#55728 = LINE('',#55729,#55730); +#55729 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55730 = VECTOR('',#55731,1.); +#55731 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55732 = ORIENTED_EDGE('',*,*,#55685,.T.); +#55733 = ORIENTED_EDGE('',*,*,#55734,.T.); +#55734 = EDGE_CURVE('',#55688,#55735,#55737,.T.); +#55735 = VERTEX_POINT('',#55736); +#55736 = CARTESIAN_POINT('',(3.45,-12.75,0.4)); +#55737 = LINE('',#55738,#55739); +#55738 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55739 = VECTOR('',#55740,1.); +#55740 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55741 = ORIENTED_EDGE('',*,*,#55742,.F.); +#55742 = EDGE_CURVE('',#55726,#55735,#55743,.T.); +#55743 = LINE('',#55744,#55745); +#55744 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#55745 = VECTOR('',#55746,1.); +#55746 = DIRECTION('',(0.,0.,1.)); +#55747 = PLANE('',#55748); +#55748 = AXIS2_PLACEMENT_3D('',#55749,#55750,#55751); +#55749 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55750 = DIRECTION('',(-4.4E-16,1.,0.)); +#55751 = DIRECTION('',(1.,4.4E-16,0.)); +#55752 = ADVANCED_FACE('',(#55753),#55778,.F.); +#55753 = FACE_BOUND('',#55754,.T.); +#55754 = EDGE_LOOP('',(#55755,#55763,#55771,#55777)); +#55755 = ORIENTED_EDGE('',*,*,#55756,.T.); +#55756 = EDGE_CURVE('',#55704,#55757,#55759,.T.); +#55757 = VERTEX_POINT('',#55758); +#55758 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#55759 = LINE('',#55760,#55761); +#55760 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55761 = VECTOR('',#55762,1.); +#55762 = DIRECTION('',(-4.4E-16,1.,0.)); +#55763 = ORIENTED_EDGE('',*,*,#55764,.T.); +#55764 = EDGE_CURVE('',#55757,#55765,#55767,.T.); +#55765 = VERTEX_POINT('',#55766); +#55766 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#55767 = LINE('',#55768,#55769); +#55768 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#55769 = VECTOR('',#55770,1.); +#55770 = DIRECTION('',(0.,0.,1.)); +#55771 = ORIENTED_EDGE('',*,*,#55772,.F.); +#55772 = EDGE_CURVE('',#55696,#55765,#55773,.T.); +#55773 = LINE('',#55774,#55775); +#55774 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#55775 = VECTOR('',#55776,1.); +#55776 = DIRECTION('',(-4.4E-16,1.,0.)); +#55777 = ORIENTED_EDGE('',*,*,#55703,.F.); +#55778 = PLANE('',#55779); +#55779 = AXIS2_PLACEMENT_3D('',#55780,#55781,#55782); +#55780 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55781 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55782 = DIRECTION('',(0.,-0.,-1.)); +#55783 = ADVANCED_FACE('',(#55784),#55828,.F.); +#55784 = FACE_BOUND('',#55785,.T.); +#55785 = EDGE_LOOP('',(#55786,#55787,#55788,#55797,#55806,#55814,#55822) + ); +#55786 = ORIENTED_EDGE('',*,*,#55711,.F.); +#55787 = ORIENTED_EDGE('',*,*,#55725,.T.); +#55788 = ORIENTED_EDGE('',*,*,#55789,.F.); +#55789 = EDGE_CURVE('',#55790,#55726,#55792,.T.); +#55790 = VERTEX_POINT('',#55791); +#55791 = CARTESIAN_POINT('',(3.175,-12.475,0.)); +#55792 = CIRCLE('',#55793,0.275); +#55793 = AXIS2_PLACEMENT_3D('',#55794,#55795,#55796); +#55794 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#55795 = DIRECTION('',(0.,0.,-1.)); +#55796 = DIRECTION('',(-4.4E-16,1.,0.)); +#55797 = ORIENTED_EDGE('',*,*,#55798,.F.); +#55798 = EDGE_CURVE('',#55799,#55790,#55801,.T.); +#55799 = VERTEX_POINT('',#55800); +#55800 = CARTESIAN_POINT('',(2.9,-12.75,0.)); +#55801 = CIRCLE('',#55802,0.275); +#55802 = AXIS2_PLACEMENT_3D('',#55803,#55804,#55805); +#55803 = CARTESIAN_POINT('',(3.175,-12.75,0.)); +#55804 = DIRECTION('',(0.,0.,-1.)); +#55805 = DIRECTION('',(-4.4E-16,1.,0.)); +#55806 = ORIENTED_EDGE('',*,*,#55807,.T.); +#55807 = EDGE_CURVE('',#55799,#55808,#55810,.T.); +#55808 = VERTEX_POINT('',#55809); +#55809 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#55810 = LINE('',#55811,#55812); +#55811 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#55812 = VECTOR('',#55813,1.); +#55813 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55814 = ORIENTED_EDGE('',*,*,#55815,.F.); +#55815 = EDGE_CURVE('',#55816,#55808,#55818,.T.); +#55816 = VERTEX_POINT('',#55817); +#55817 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#55818 = LINE('',#55819,#55820); +#55819 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#55820 = VECTOR('',#55821,1.); +#55821 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55822 = ORIENTED_EDGE('',*,*,#55823,.F.); +#55823 = EDGE_CURVE('',#55704,#55816,#55824,.T.); +#55824 = LINE('',#55825,#55826); +#55825 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55826 = VECTOR('',#55827,1.); +#55827 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55828 = PLANE('',#55829); +#55829 = AXIS2_PLACEMENT_3D('',#55830,#55831,#55832); +#55830 = CARTESIAN_POINT('',(3.175,-12.525,0.)); +#55831 = DIRECTION('',(0.,0.,1.)); +#55832 = DIRECTION('',(4.4E-16,-1.,0.)); +#55833 = ADVANCED_FACE('',(#55834),#55859,.T.); +#55834 = FACE_BOUND('',#55835,.F.); +#55835 = EDGE_LOOP('',(#55836,#55844,#55852,#55858)); +#55836 = ORIENTED_EDGE('',*,*,#55837,.T.); +#55837 = EDGE_CURVE('',#55688,#55838,#55840,.T.); +#55838 = VERTEX_POINT('',#55839); +#55839 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#55840 = LINE('',#55841,#55842); +#55841 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55842 = VECTOR('',#55843,1.); +#55843 = DIRECTION('',(0.,0.,1.)); +#55844 = ORIENTED_EDGE('',*,*,#55845,.T.); +#55845 = EDGE_CURVE('',#55838,#55846,#55848,.T.); +#55846 = VERTEX_POINT('',#55847); +#55847 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#55848 = LINE('',#55849,#55850); +#55849 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#55850 = VECTOR('',#55851,1.); +#55851 = DIRECTION('',(-4.4E-16,1.,0.)); +#55852 = ORIENTED_EDGE('',*,*,#55853,.F.); +#55853 = EDGE_CURVE('',#55696,#55846,#55854,.T.); +#55854 = LINE('',#55855,#55856); +#55855 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#55856 = VECTOR('',#55857,1.); +#55857 = DIRECTION('',(0.,0.,1.)); +#55858 = ORIENTED_EDGE('',*,*,#55695,.F.); +#55859 = PLANE('',#55860); +#55860 = AXIS2_PLACEMENT_3D('',#55861,#55862,#55863); +#55861 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55862 = DIRECTION('',(1.,4.4E-16,0.)); +#55863 = DIRECTION('',(4.4E-16,-1.,-0.)); +#55864 = ADVANCED_FACE('',(#55865),#55892,.F.); +#55865 = FACE_BOUND('',#55866,.F.); +#55866 = EDGE_LOOP('',(#55867,#55875,#55876,#55877,#55885)); +#55867 = ORIENTED_EDGE('',*,*,#55868,.F.); +#55868 = EDGE_CURVE('',#55735,#55869,#55871,.T.); +#55869 = VERTEX_POINT('',#55870); +#55870 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#55871 = LINE('',#55872,#55873); +#55872 = CARTESIAN_POINT('',(3.45,-12.75,0.8)); +#55873 = VECTOR('',#55874,1.); +#55874 = DIRECTION('',(0.,0.,1.)); +#55875 = ORIENTED_EDGE('',*,*,#55742,.F.); +#55876 = ORIENTED_EDGE('',*,*,#55789,.F.); +#55877 = ORIENTED_EDGE('',*,*,#55878,.F.); +#55878 = EDGE_CURVE('',#55879,#55790,#55881,.T.); +#55879 = VERTEX_POINT('',#55880); +#55880 = CARTESIAN_POINT('',(3.175,-12.475,0.8)); +#55881 = LINE('',#55882,#55883); +#55882 = CARTESIAN_POINT('',(3.175,-12.475,0.8)); +#55883 = VECTOR('',#55884,1.); +#55884 = DIRECTION('',(0.,-0.,-1.)); +#55885 = ORIENTED_EDGE('',*,*,#55886,.T.); +#55886 = EDGE_CURVE('',#55879,#55869,#55887,.T.); +#55887 = CIRCLE('',#55888,0.275); +#55888 = AXIS2_PLACEMENT_3D('',#55889,#55890,#55891); +#55889 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#55890 = DIRECTION('',(0.,0.,-1.)); +#55891 = DIRECTION('',(-4.4E-16,1.,0.)); +#55892 = CYLINDRICAL_SURFACE('',#55893,0.275); +#55893 = AXIS2_PLACEMENT_3D('',#55894,#55895,#55896); +#55894 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#55895 = DIRECTION('',(0.,0.,1.)); +#55896 = DIRECTION('',(-4.4E-16,1.,0.)); +#55897 = ADVANCED_FACE('',(#55898),#55909,.F.); +#55898 = FACE_BOUND('',#55899,.T.); +#55899 = EDGE_LOOP('',(#55900,#55901,#55902,#55908)); +#55900 = ORIENTED_EDGE('',*,*,#55734,.F.); +#55901 = ORIENTED_EDGE('',*,*,#55837,.T.); +#55902 = ORIENTED_EDGE('',*,*,#55903,.T.); +#55903 = EDGE_CURVE('',#55838,#55869,#55904,.T.); +#55904 = LINE('',#55905,#55906); +#55905 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#55906 = VECTOR('',#55907,1.); +#55907 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55908 = ORIENTED_EDGE('',*,*,#55868,.F.); +#55909 = PLANE('',#55910); +#55910 = AXIS2_PLACEMENT_3D('',#55911,#55912,#55913); +#55911 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#55912 = DIRECTION('',(-4.4E-16,1.,0.)); +#55913 = DIRECTION('',(1.,4.4E-16,0.)); +#55914 = ADVANCED_FACE('',(#55915),#55933,.T.); +#55915 = FACE_BOUND('',#55916,.F.); +#55916 = EDGE_LOOP('',(#55917,#55918,#55926,#55932)); +#55917 = ORIENTED_EDGE('',*,*,#55756,.T.); +#55918 = ORIENTED_EDGE('',*,*,#55919,.T.); +#55919 = EDGE_CURVE('',#55757,#55920,#55922,.T.); +#55920 = VERTEX_POINT('',#55921); +#55921 = CARTESIAN_POINT('',(2.725,-11.9,0.)); +#55922 = LINE('',#55923,#55924); +#55923 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#55924 = VECTOR('',#55925,1.); +#55925 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55926 = ORIENTED_EDGE('',*,*,#55927,.F.); +#55927 = EDGE_CURVE('',#55816,#55920,#55928,.T.); +#55928 = LINE('',#55929,#55930); +#55929 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#55930 = VECTOR('',#55931,1.); +#55931 = DIRECTION('',(-4.4E-16,1.,0.)); +#55932 = ORIENTED_EDGE('',*,*,#55823,.F.); +#55933 = PLANE('',#55934); +#55934 = AXIS2_PLACEMENT_3D('',#55935,#55936,#55937); +#55935 = CARTESIAN_POINT('',(3.625,-12.3,0.)); +#55936 = DIRECTION('',(0.,0.,-1.)); +#55937 = DIRECTION('',(1.,4.4E-16,0.)); +#55938 = ADVANCED_FACE('',(#55939),#55964,.F.); +#55939 = FACE_BOUND('',#55940,.T.); +#55940 = EDGE_LOOP('',(#55941,#55942,#55950,#55958)); +#55941 = ORIENTED_EDGE('',*,*,#55772,.T.); +#55942 = ORIENTED_EDGE('',*,*,#55943,.T.); +#55943 = EDGE_CURVE('',#55765,#55944,#55946,.T.); +#55944 = VERTEX_POINT('',#55945); +#55945 = CARTESIAN_POINT('',(2.725,-11.9,0.4)); +#55946 = LINE('',#55947,#55948); +#55947 = CARTESIAN_POINT('',(3.625,-11.9,0.4)); +#55948 = VECTOR('',#55949,1.); +#55949 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55950 = ORIENTED_EDGE('',*,*,#55951,.F.); +#55951 = EDGE_CURVE('',#55952,#55944,#55954,.T.); +#55952 = VERTEX_POINT('',#55953); +#55953 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#55954 = LINE('',#55955,#55956); +#55955 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#55956 = VECTOR('',#55957,1.); +#55957 = DIRECTION('',(-4.4E-16,1.,0.)); +#55958 = ORIENTED_EDGE('',*,*,#55959,.F.); +#55959 = EDGE_CURVE('',#55696,#55952,#55960,.T.); +#55960 = LINE('',#55961,#55962); +#55961 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#55962 = VECTOR('',#55963,1.); +#55963 = DIRECTION('',(-1.,-4.4E-16,0.)); +#55964 = PLANE('',#55965); +#55965 = AXIS2_PLACEMENT_3D('',#55966,#55967,#55968); +#55966 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#55967 = DIRECTION('',(0.,0.,-1.)); +#55968 = DIRECTION('',(1.,4.4E-16,0.)); +#55969 = ADVANCED_FACE('',(#55970),#55981,.T.); +#55970 = FACE_BOUND('',#55971,.F.); +#55971 = EDGE_LOOP('',(#55972,#55973,#55974,#55980)); +#55972 = ORIENTED_EDGE('',*,*,#55764,.T.); +#55973 = ORIENTED_EDGE('',*,*,#55943,.T.); +#55974 = ORIENTED_EDGE('',*,*,#55975,.F.); +#55975 = EDGE_CURVE('',#55920,#55944,#55976,.T.); +#55976 = LINE('',#55977,#55978); +#55977 = CARTESIAN_POINT('',(2.725,-11.9,0.)); +#55978 = VECTOR('',#55979,1.); +#55979 = DIRECTION('',(0.,0.,1.)); +#55980 = ORIENTED_EDGE('',*,*,#55919,.F.); +#55981 = PLANE('',#55982); +#55982 = AXIS2_PLACEMENT_3D('',#55983,#55984,#55985); +#55983 = CARTESIAN_POINT('',(3.625,-11.9,0.)); +#55984 = DIRECTION('',(-4.4E-16,1.,0.)); +#55985 = DIRECTION('',(1.,4.4E-16,0.)); +#55986 = ADVANCED_FACE('',(#55987),#56010,.T.); +#55987 = FACE_BOUND('',#55988,.F.); +#55988 = EDGE_LOOP('',(#55989,#55995,#56003,#56009)); +#55989 = ORIENTED_EDGE('',*,*,#55990,.T.); +#55990 = EDGE_CURVE('',#55816,#55952,#55991,.T.); +#55991 = LINE('',#55992,#55993); +#55992 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#55993 = VECTOR('',#55994,1.); +#55994 = DIRECTION('',(0.,0.,1.)); +#55995 = ORIENTED_EDGE('',*,*,#55996,.T.); +#55996 = EDGE_CURVE('',#55952,#55997,#55999,.T.); +#55997 = VERTEX_POINT('',#55998); +#55998 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#55999 = LINE('',#56000,#56001); +#56000 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#56001 = VECTOR('',#56002,1.); +#56002 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56003 = ORIENTED_EDGE('',*,*,#56004,.F.); +#56004 = EDGE_CURVE('',#55808,#55997,#56005,.T.); +#56005 = LINE('',#56006,#56007); +#56006 = CARTESIAN_POINT('',(2.725,-12.75,0.)); +#56007 = VECTOR('',#56008,1.); +#56008 = DIRECTION('',(0.,0.,1.)); +#56009 = ORIENTED_EDGE('',*,*,#55815,.F.); +#56010 = PLANE('',#56011); +#56011 = AXIS2_PLACEMENT_3D('',#56012,#56013,#56014); +#56012 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#56013 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56014 = DIRECTION('',(-4.4E-16,1.,0.)); +#56015 = ADVANCED_FACE('',(#56016),#56034,.F.); +#56016 = FACE_BOUND('',#56017,.T.); +#56017 = EDGE_LOOP('',(#56018,#56019,#56027,#56033)); +#56018 = ORIENTED_EDGE('',*,*,#55807,.F.); +#56019 = ORIENTED_EDGE('',*,*,#56020,.T.); +#56020 = EDGE_CURVE('',#55799,#56021,#56023,.T.); +#56021 = VERTEX_POINT('',#56022); +#56022 = CARTESIAN_POINT('',(2.9,-12.75,0.4)); +#56023 = LINE('',#56024,#56025); +#56024 = CARTESIAN_POINT('',(2.9,-12.75,0.8)); +#56025 = VECTOR('',#56026,1.); +#56026 = DIRECTION('',(0.,0.,1.)); +#56027 = ORIENTED_EDGE('',*,*,#56028,.T.); +#56028 = EDGE_CURVE('',#56021,#55997,#56029,.T.); +#56029 = LINE('',#56030,#56031); +#56030 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#56031 = VECTOR('',#56032,1.); +#56032 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56033 = ORIENTED_EDGE('',*,*,#56004,.F.); +#56034 = PLANE('',#56035); +#56035 = AXIS2_PLACEMENT_3D('',#56036,#56037,#56038); +#56036 = CARTESIAN_POINT('',(3.625,-12.75,0.)); +#56037 = DIRECTION('',(-4.4E-16,1.,0.)); +#56038 = DIRECTION('',(1.,4.4E-16,0.)); +#56039 = ADVANCED_FACE('',(#56040),#56060,.F.); +#56040 = FACE_BOUND('',#56041,.F.); +#56041 = EDGE_LOOP('',(#56042,#56043,#56044,#56052,#56059)); +#56042 = ORIENTED_EDGE('',*,*,#55798,.F.); +#56043 = ORIENTED_EDGE('',*,*,#56020,.T.); +#56044 = ORIENTED_EDGE('',*,*,#56045,.T.); +#56045 = EDGE_CURVE('',#56021,#56046,#56048,.T.); +#56046 = VERTEX_POINT('',#56047); +#56047 = CARTESIAN_POINT('',(2.9,-12.75,0.8)); +#56048 = LINE('',#56049,#56050); +#56049 = CARTESIAN_POINT('',(2.9,-12.75,0.8)); +#56050 = VECTOR('',#56051,1.); +#56051 = DIRECTION('',(0.,0.,1.)); +#56052 = ORIENTED_EDGE('',*,*,#56053,.T.); +#56053 = EDGE_CURVE('',#56046,#55879,#56054,.T.); +#56054 = CIRCLE('',#56055,0.275); +#56055 = AXIS2_PLACEMENT_3D('',#56056,#56057,#56058); +#56056 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#56057 = DIRECTION('',(0.,0.,-1.)); +#56058 = DIRECTION('',(-4.4E-16,1.,0.)); +#56059 = ORIENTED_EDGE('',*,*,#55878,.T.); +#56060 = CYLINDRICAL_SURFACE('',#56061,0.275); +#56061 = AXIS2_PLACEMENT_3D('',#56062,#56063,#56064); +#56062 = CARTESIAN_POINT('',(3.175,-12.75,0.8)); +#56063 = DIRECTION('',(0.,0.,1.)); +#56064 = DIRECTION('',(-4.4E-16,1.,0.)); +#56065 = ADVANCED_FACE('',(#56066),#56084,.T.); +#56066 = FACE_BOUND('',#56067,.F.); +#56067 = EDGE_LOOP('',(#56068,#56069,#56077,#56083)); +#56068 = ORIENTED_EDGE('',*,*,#55853,.T.); +#56069 = ORIENTED_EDGE('',*,*,#56070,.T.); +#56070 = EDGE_CURVE('',#55846,#56071,#56073,.T.); +#56071 = VERTEX_POINT('',#56072); +#56072 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#56073 = LINE('',#56074,#56075); +#56074 = CARTESIAN_POINT('',(3.625,-12.3,0.8)); +#56075 = VECTOR('',#56076,1.); +#56076 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56077 = ORIENTED_EDGE('',*,*,#56078,.F.); +#56078 = EDGE_CURVE('',#55952,#56071,#56079,.T.); +#56079 = LINE('',#56080,#56081); +#56080 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#56081 = VECTOR('',#56082,1.); +#56082 = DIRECTION('',(0.,0.,1.)); +#56083 = ORIENTED_EDGE('',*,*,#55959,.F.); +#56084 = PLANE('',#56085); +#56085 = AXIS2_PLACEMENT_3D('',#56086,#56087,#56088); +#56086 = CARTESIAN_POINT('',(3.625,-12.3,0.4)); +#56087 = DIRECTION('',(-4.4E-16,1.,0.)); +#56088 = DIRECTION('',(1.,4.4E-16,0.)); +#56089 = ADVANCED_FACE('',(#56090),#56111,.T.); +#56090 = FACE_BOUND('',#56091,.F.); +#56091 = EDGE_LOOP('',(#56092,#56093,#56094,#56095,#56096,#56104,#56110) + ); +#56092 = ORIENTED_EDGE('',*,*,#55845,.F.); +#56093 = ORIENTED_EDGE('',*,*,#55903,.T.); +#56094 = ORIENTED_EDGE('',*,*,#55886,.F.); +#56095 = ORIENTED_EDGE('',*,*,#56053,.F.); +#56096 = ORIENTED_EDGE('',*,*,#56097,.T.); +#56097 = EDGE_CURVE('',#56046,#56098,#56100,.T.); +#56098 = VERTEX_POINT('',#56099); +#56099 = CARTESIAN_POINT('',(2.725,-12.75,0.8)); +#56100 = LINE('',#56101,#56102); +#56101 = CARTESIAN_POINT('',(3.625,-12.75,0.8)); +#56102 = VECTOR('',#56103,1.); +#56103 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56104 = ORIENTED_EDGE('',*,*,#56105,.F.); +#56105 = EDGE_CURVE('',#56071,#56098,#56106,.T.); +#56106 = LINE('',#56107,#56108); +#56107 = CARTESIAN_POINT('',(2.725,-12.3,0.8)); +#56108 = VECTOR('',#56109,1.); +#56109 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56110 = ORIENTED_EDGE('',*,*,#56070,.F.); +#56111 = PLANE('',#56112); +#56112 = AXIS2_PLACEMENT_3D('',#56113,#56114,#56115); +#56113 = CARTESIAN_POINT('',(3.175,-12.525,0.8)); +#56114 = DIRECTION('',(0.,0.,1.)); +#56115 = DIRECTION('',(4.4E-16,-1.,0.)); +#56116 = ADVANCED_FACE('',(#56117),#56123,.T.); +#56117 = FACE_BOUND('',#56118,.F.); +#56118 = EDGE_LOOP('',(#56119,#56120,#56121,#56122)); +#56119 = ORIENTED_EDGE('',*,*,#55927,.T.); +#56120 = ORIENTED_EDGE('',*,*,#55975,.T.); +#56121 = ORIENTED_EDGE('',*,*,#55951,.F.); +#56122 = ORIENTED_EDGE('',*,*,#55990,.F.); +#56123 = PLANE('',#56124); +#56124 = AXIS2_PLACEMENT_3D('',#56125,#56126,#56127); +#56125 = CARTESIAN_POINT('',(2.725,-12.3,0.)); +#56126 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56127 = DIRECTION('',(0.,-0.,-1.)); +#56128 = ADVANCED_FACE('',(#56129),#56140,.T.); +#56129 = FACE_BOUND('',#56130,.F.); +#56130 = EDGE_LOOP('',(#56131,#56132,#56133,#56139)); +#56131 = ORIENTED_EDGE('',*,*,#56078,.T.); +#56132 = ORIENTED_EDGE('',*,*,#56105,.T.); +#56133 = ORIENTED_EDGE('',*,*,#56134,.F.); +#56134 = EDGE_CURVE('',#55997,#56098,#56135,.T.); +#56135 = LINE('',#56136,#56137); +#56136 = CARTESIAN_POINT('',(2.725,-12.75,0.4)); +#56137 = VECTOR('',#56138,1.); +#56138 = DIRECTION('',(0.,0.,1.)); +#56139 = ORIENTED_EDGE('',*,*,#55996,.F.); +#56140 = PLANE('',#56141); +#56141 = AXIS2_PLACEMENT_3D('',#56142,#56143,#56144); +#56142 = CARTESIAN_POINT('',(2.725,-12.3,0.4)); +#56143 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56144 = DIRECTION('',(-4.4E-16,1.,0.)); +#56145 = ADVANCED_FACE('',(#56146),#56152,.F.); +#56146 = FACE_BOUND('',#56147,.T.); +#56147 = EDGE_LOOP('',(#56148,#56149,#56150,#56151)); +#56148 = ORIENTED_EDGE('',*,*,#56028,.F.); +#56149 = ORIENTED_EDGE('',*,*,#56045,.T.); +#56150 = ORIENTED_EDGE('',*,*,#56097,.T.); +#56151 = ORIENTED_EDGE('',*,*,#56134,.F.); +#56152 = PLANE('',#56153); +#56153 = AXIS2_PLACEMENT_3D('',#56154,#56155,#56156); +#56154 = CARTESIAN_POINT('',(3.625,-12.75,0.4)); +#56155 = DIRECTION('',(-4.4E-16,1.,0.)); +#56156 = DIRECTION('',(1.,4.4E-16,0.)); +#56157 = MANIFOLD_SOLID_BREP('',#56158); +#56158 = CLOSED_SHELL('',(#56159,#56199,#56230,#56261,#56311,#56342, + #56375,#56392,#56416,#56447,#56464,#56493,#56517,#56543,#56567, + #56594,#56606,#56623)); +#56159 = ADVANCED_FACE('',(#56160),#56194,.T.); +#56160 = FACE_BOUND('',#56161,.F.); +#56161 = EDGE_LOOP('',(#56162,#56172,#56180,#56188)); +#56162 = ORIENTED_EDGE('',*,*,#56163,.T.); +#56163 = EDGE_CURVE('',#56164,#56166,#56168,.T.); +#56164 = VERTEX_POINT('',#56165); +#56165 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56166 = VERTEX_POINT('',#56167); +#56167 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56168 = LINE('',#56169,#56170); +#56169 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56170 = VECTOR('',#56171,1.); +#56171 = DIRECTION('',(0.,0.,1.)); +#56172 = ORIENTED_EDGE('',*,*,#56173,.T.); +#56173 = EDGE_CURVE('',#56166,#56174,#56176,.T.); +#56174 = VERTEX_POINT('',#56175); +#56175 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56176 = LINE('',#56177,#56178); +#56177 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56178 = VECTOR('',#56179,1.); +#56179 = DIRECTION('',(-4.4E-16,1.,0.)); +#56180 = ORIENTED_EDGE('',*,*,#56181,.F.); +#56181 = EDGE_CURVE('',#56182,#56174,#56184,.T.); +#56182 = VERTEX_POINT('',#56183); +#56183 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56184 = LINE('',#56185,#56186); +#56185 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56186 = VECTOR('',#56187,1.); +#56187 = DIRECTION('',(0.,0.,1.)); +#56188 = ORIENTED_EDGE('',*,*,#56189,.F.); +#56189 = EDGE_CURVE('',#56164,#56182,#56190,.T.); +#56190 = LINE('',#56191,#56192); +#56191 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56192 = VECTOR('',#56193,1.); +#56193 = DIRECTION('',(-4.4E-16,1.,0.)); +#56194 = PLANE('',#56195); +#56195 = AXIS2_PLACEMENT_3D('',#56196,#56197,#56198); +#56196 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56197 = DIRECTION('',(1.,4.4E-16,0.)); +#56198 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56199 = ADVANCED_FACE('',(#56200),#56225,.F.); +#56200 = FACE_BOUND('',#56201,.T.); +#56201 = EDGE_LOOP('',(#56202,#56210,#56211,#56219)); +#56202 = ORIENTED_EDGE('',*,*,#56203,.F.); +#56203 = EDGE_CURVE('',#56164,#56204,#56206,.T.); +#56204 = VERTEX_POINT('',#56205); +#56205 = CARTESIAN_POINT('',(2.18,-12.75,0.)); +#56206 = LINE('',#56207,#56208); +#56207 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56208 = VECTOR('',#56209,1.); +#56209 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56210 = ORIENTED_EDGE('',*,*,#56163,.T.); +#56211 = ORIENTED_EDGE('',*,*,#56212,.T.); +#56212 = EDGE_CURVE('',#56166,#56213,#56215,.T.); +#56213 = VERTEX_POINT('',#56214); +#56214 = CARTESIAN_POINT('',(2.18,-12.75,0.4)); +#56215 = LINE('',#56216,#56217); +#56216 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56217 = VECTOR('',#56218,1.); +#56218 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56219 = ORIENTED_EDGE('',*,*,#56220,.F.); +#56220 = EDGE_CURVE('',#56204,#56213,#56221,.T.); +#56221 = LINE('',#56222,#56223); +#56222 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#56223 = VECTOR('',#56224,1.); +#56224 = DIRECTION('',(0.,0.,1.)); +#56225 = PLANE('',#56226); +#56226 = AXIS2_PLACEMENT_3D('',#56227,#56228,#56229); +#56227 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56228 = DIRECTION('',(-4.4E-16,1.,0.)); +#56229 = DIRECTION('',(1.,4.4E-16,0.)); +#56230 = ADVANCED_FACE('',(#56231),#56256,.F.); +#56231 = FACE_BOUND('',#56232,.T.); +#56232 = EDGE_LOOP('',(#56233,#56241,#56249,#56255)); +#56233 = ORIENTED_EDGE('',*,*,#56234,.T.); +#56234 = EDGE_CURVE('',#56182,#56235,#56237,.T.); +#56235 = VERTEX_POINT('',#56236); +#56236 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#56237 = LINE('',#56238,#56239); +#56238 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56239 = VECTOR('',#56240,1.); +#56240 = DIRECTION('',(-4.4E-16,1.,0.)); +#56241 = ORIENTED_EDGE('',*,*,#56242,.T.); +#56242 = EDGE_CURVE('',#56235,#56243,#56245,.T.); +#56243 = VERTEX_POINT('',#56244); +#56244 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#56245 = LINE('',#56246,#56247); +#56246 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#56247 = VECTOR('',#56248,1.); +#56248 = DIRECTION('',(0.,0.,1.)); +#56249 = ORIENTED_EDGE('',*,*,#56250,.F.); +#56250 = EDGE_CURVE('',#56174,#56243,#56251,.T.); +#56251 = LINE('',#56252,#56253); +#56252 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56253 = VECTOR('',#56254,1.); +#56254 = DIRECTION('',(-4.4E-16,1.,0.)); +#56255 = ORIENTED_EDGE('',*,*,#56181,.F.); +#56256 = PLANE('',#56257); +#56257 = AXIS2_PLACEMENT_3D('',#56258,#56259,#56260); +#56258 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56259 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56260 = DIRECTION('',(0.,-0.,-1.)); +#56261 = ADVANCED_FACE('',(#56262),#56306,.F.); +#56262 = FACE_BOUND('',#56263,.T.); +#56263 = EDGE_LOOP('',(#56264,#56265,#56266,#56275,#56284,#56292,#56300) + ); +#56264 = ORIENTED_EDGE('',*,*,#56189,.F.); +#56265 = ORIENTED_EDGE('',*,*,#56203,.T.); +#56266 = ORIENTED_EDGE('',*,*,#56267,.F.); +#56267 = EDGE_CURVE('',#56268,#56204,#56270,.T.); +#56268 = VERTEX_POINT('',#56269); +#56269 = CARTESIAN_POINT('',(1.905,-12.475,0.)); +#56270 = CIRCLE('',#56271,0.275); +#56271 = AXIS2_PLACEMENT_3D('',#56272,#56273,#56274); +#56272 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#56273 = DIRECTION('',(0.,0.,-1.)); +#56274 = DIRECTION('',(-4.4E-16,1.,0.)); +#56275 = ORIENTED_EDGE('',*,*,#56276,.F.); +#56276 = EDGE_CURVE('',#56277,#56268,#56279,.T.); +#56277 = VERTEX_POINT('',#56278); +#56278 = CARTESIAN_POINT('',(1.63,-12.75,0.)); +#56279 = CIRCLE('',#56280,0.275); +#56280 = AXIS2_PLACEMENT_3D('',#56281,#56282,#56283); +#56281 = CARTESIAN_POINT('',(1.905,-12.75,0.)); +#56282 = DIRECTION('',(0.,0.,-1.)); +#56283 = DIRECTION('',(-4.4E-16,1.,0.)); +#56284 = ORIENTED_EDGE('',*,*,#56285,.T.); +#56285 = EDGE_CURVE('',#56277,#56286,#56288,.T.); +#56286 = VERTEX_POINT('',#56287); +#56287 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#56288 = LINE('',#56289,#56290); +#56289 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56290 = VECTOR('',#56291,1.); +#56291 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56292 = ORIENTED_EDGE('',*,*,#56293,.F.); +#56293 = EDGE_CURVE('',#56294,#56286,#56296,.T.); +#56294 = VERTEX_POINT('',#56295); +#56295 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56296 = LINE('',#56297,#56298); +#56297 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56298 = VECTOR('',#56299,1.); +#56299 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56300 = ORIENTED_EDGE('',*,*,#56301,.F.); +#56301 = EDGE_CURVE('',#56182,#56294,#56302,.T.); +#56302 = LINE('',#56303,#56304); +#56303 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56304 = VECTOR('',#56305,1.); +#56305 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56306 = PLANE('',#56307); +#56307 = AXIS2_PLACEMENT_3D('',#56308,#56309,#56310); +#56308 = CARTESIAN_POINT('',(1.905,-12.525,0.)); +#56309 = DIRECTION('',(0.,0.,1.)); +#56310 = DIRECTION('',(4.4E-16,-1.,0.)); +#56311 = ADVANCED_FACE('',(#56312),#56337,.T.); +#56312 = FACE_BOUND('',#56313,.F.); +#56313 = EDGE_LOOP('',(#56314,#56322,#56330,#56336)); +#56314 = ORIENTED_EDGE('',*,*,#56315,.T.); +#56315 = EDGE_CURVE('',#56166,#56316,#56318,.T.); +#56316 = VERTEX_POINT('',#56317); +#56317 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#56318 = LINE('',#56319,#56320); +#56319 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56320 = VECTOR('',#56321,1.); +#56321 = DIRECTION('',(0.,0.,1.)); +#56322 = ORIENTED_EDGE('',*,*,#56323,.T.); +#56323 = EDGE_CURVE('',#56316,#56324,#56326,.T.); +#56324 = VERTEX_POINT('',#56325); +#56325 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#56326 = LINE('',#56327,#56328); +#56327 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#56328 = VECTOR('',#56329,1.); +#56329 = DIRECTION('',(-4.4E-16,1.,0.)); +#56330 = ORIENTED_EDGE('',*,*,#56331,.F.); +#56331 = EDGE_CURVE('',#56174,#56324,#56332,.T.); +#56332 = LINE('',#56333,#56334); +#56333 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56334 = VECTOR('',#56335,1.); +#56335 = DIRECTION('',(0.,0.,1.)); +#56336 = ORIENTED_EDGE('',*,*,#56173,.F.); +#56337 = PLANE('',#56338); +#56338 = AXIS2_PLACEMENT_3D('',#56339,#56340,#56341); +#56339 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56340 = DIRECTION('',(1.,4.4E-16,0.)); +#56341 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56342 = ADVANCED_FACE('',(#56343),#56370,.F.); +#56343 = FACE_BOUND('',#56344,.F.); +#56344 = EDGE_LOOP('',(#56345,#56353,#56354,#56355,#56363)); +#56345 = ORIENTED_EDGE('',*,*,#56346,.F.); +#56346 = EDGE_CURVE('',#56213,#56347,#56349,.T.); +#56347 = VERTEX_POINT('',#56348); +#56348 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#56349 = LINE('',#56350,#56351); +#56350 = CARTESIAN_POINT('',(2.18,-12.75,0.8)); +#56351 = VECTOR('',#56352,1.); +#56352 = DIRECTION('',(0.,0.,1.)); +#56353 = ORIENTED_EDGE('',*,*,#56220,.F.); +#56354 = ORIENTED_EDGE('',*,*,#56267,.F.); +#56355 = ORIENTED_EDGE('',*,*,#56356,.F.); +#56356 = EDGE_CURVE('',#56357,#56268,#56359,.T.); +#56357 = VERTEX_POINT('',#56358); +#56358 = CARTESIAN_POINT('',(1.905,-12.475,0.8)); +#56359 = LINE('',#56360,#56361); +#56360 = CARTESIAN_POINT('',(1.905,-12.475,0.8)); +#56361 = VECTOR('',#56362,1.); +#56362 = DIRECTION('',(0.,-0.,-1.)); +#56363 = ORIENTED_EDGE('',*,*,#56364,.T.); +#56364 = EDGE_CURVE('',#56357,#56347,#56365,.T.); +#56365 = CIRCLE('',#56366,0.275); +#56366 = AXIS2_PLACEMENT_3D('',#56367,#56368,#56369); +#56367 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#56368 = DIRECTION('',(0.,0.,-1.)); +#56369 = DIRECTION('',(-4.4E-16,1.,0.)); +#56370 = CYLINDRICAL_SURFACE('',#56371,0.275); +#56371 = AXIS2_PLACEMENT_3D('',#56372,#56373,#56374); +#56372 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#56373 = DIRECTION('',(0.,0.,1.)); +#56374 = DIRECTION('',(-4.4E-16,1.,0.)); +#56375 = ADVANCED_FACE('',(#56376),#56387,.F.); +#56376 = FACE_BOUND('',#56377,.T.); +#56377 = EDGE_LOOP('',(#56378,#56379,#56380,#56386)); +#56378 = ORIENTED_EDGE('',*,*,#56212,.F.); +#56379 = ORIENTED_EDGE('',*,*,#56315,.T.); +#56380 = ORIENTED_EDGE('',*,*,#56381,.T.); +#56381 = EDGE_CURVE('',#56316,#56347,#56382,.T.); +#56382 = LINE('',#56383,#56384); +#56383 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#56384 = VECTOR('',#56385,1.); +#56385 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56386 = ORIENTED_EDGE('',*,*,#56346,.F.); +#56387 = PLANE('',#56388); +#56388 = AXIS2_PLACEMENT_3D('',#56389,#56390,#56391); +#56389 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56390 = DIRECTION('',(-4.4E-16,1.,0.)); +#56391 = DIRECTION('',(1.,4.4E-16,0.)); +#56392 = ADVANCED_FACE('',(#56393),#56411,.T.); +#56393 = FACE_BOUND('',#56394,.F.); +#56394 = EDGE_LOOP('',(#56395,#56396,#56404,#56410)); +#56395 = ORIENTED_EDGE('',*,*,#56234,.T.); +#56396 = ORIENTED_EDGE('',*,*,#56397,.T.); +#56397 = EDGE_CURVE('',#56235,#56398,#56400,.T.); +#56398 = VERTEX_POINT('',#56399); +#56399 = CARTESIAN_POINT('',(1.455,-11.9,0.)); +#56400 = LINE('',#56401,#56402); +#56401 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#56402 = VECTOR('',#56403,1.); +#56403 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56404 = ORIENTED_EDGE('',*,*,#56405,.F.); +#56405 = EDGE_CURVE('',#56294,#56398,#56406,.T.); +#56406 = LINE('',#56407,#56408); +#56407 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56408 = VECTOR('',#56409,1.); +#56409 = DIRECTION('',(-4.4E-16,1.,0.)); +#56410 = ORIENTED_EDGE('',*,*,#56301,.F.); +#56411 = PLANE('',#56412); +#56412 = AXIS2_PLACEMENT_3D('',#56413,#56414,#56415); +#56413 = CARTESIAN_POINT('',(2.355,-12.3,0.)); +#56414 = DIRECTION('',(0.,0.,-1.)); +#56415 = DIRECTION('',(1.,4.4E-16,0.)); +#56416 = ADVANCED_FACE('',(#56417),#56442,.F.); +#56417 = FACE_BOUND('',#56418,.T.); +#56418 = EDGE_LOOP('',(#56419,#56420,#56428,#56436)); +#56419 = ORIENTED_EDGE('',*,*,#56250,.T.); +#56420 = ORIENTED_EDGE('',*,*,#56421,.T.); +#56421 = EDGE_CURVE('',#56243,#56422,#56424,.T.); +#56422 = VERTEX_POINT('',#56423); +#56423 = CARTESIAN_POINT('',(1.455,-11.9,0.4)); +#56424 = LINE('',#56425,#56426); +#56425 = CARTESIAN_POINT('',(2.355,-11.9,0.4)); +#56426 = VECTOR('',#56427,1.); +#56427 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56428 = ORIENTED_EDGE('',*,*,#56429,.F.); +#56429 = EDGE_CURVE('',#56430,#56422,#56432,.T.); +#56430 = VERTEX_POINT('',#56431); +#56431 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#56432 = LINE('',#56433,#56434); +#56433 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#56434 = VECTOR('',#56435,1.); +#56435 = DIRECTION('',(-4.4E-16,1.,0.)); +#56436 = ORIENTED_EDGE('',*,*,#56437,.F.); +#56437 = EDGE_CURVE('',#56174,#56430,#56438,.T.); +#56438 = LINE('',#56439,#56440); +#56439 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56440 = VECTOR('',#56441,1.); +#56441 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56442 = PLANE('',#56443); +#56443 = AXIS2_PLACEMENT_3D('',#56444,#56445,#56446); +#56444 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56445 = DIRECTION('',(0.,0.,-1.)); +#56446 = DIRECTION('',(1.,4.4E-16,0.)); +#56447 = ADVANCED_FACE('',(#56448),#56459,.T.); +#56448 = FACE_BOUND('',#56449,.F.); +#56449 = EDGE_LOOP('',(#56450,#56451,#56452,#56458)); +#56450 = ORIENTED_EDGE('',*,*,#56242,.T.); +#56451 = ORIENTED_EDGE('',*,*,#56421,.T.); +#56452 = ORIENTED_EDGE('',*,*,#56453,.F.); +#56453 = EDGE_CURVE('',#56398,#56422,#56454,.T.); +#56454 = LINE('',#56455,#56456); +#56455 = CARTESIAN_POINT('',(1.455,-11.9,0.)); +#56456 = VECTOR('',#56457,1.); +#56457 = DIRECTION('',(0.,0.,1.)); +#56458 = ORIENTED_EDGE('',*,*,#56397,.F.); +#56459 = PLANE('',#56460); +#56460 = AXIS2_PLACEMENT_3D('',#56461,#56462,#56463); +#56461 = CARTESIAN_POINT('',(2.355,-11.9,0.)); +#56462 = DIRECTION('',(-4.4E-16,1.,0.)); +#56463 = DIRECTION('',(1.,4.4E-16,0.)); +#56464 = ADVANCED_FACE('',(#56465),#56488,.T.); +#56465 = FACE_BOUND('',#56466,.F.); +#56466 = EDGE_LOOP('',(#56467,#56473,#56481,#56487)); +#56467 = ORIENTED_EDGE('',*,*,#56468,.T.); +#56468 = EDGE_CURVE('',#56294,#56430,#56469,.T.); +#56469 = LINE('',#56470,#56471); +#56470 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56471 = VECTOR('',#56472,1.); +#56472 = DIRECTION('',(0.,0.,1.)); +#56473 = ORIENTED_EDGE('',*,*,#56474,.T.); +#56474 = EDGE_CURVE('',#56430,#56475,#56477,.T.); +#56475 = VERTEX_POINT('',#56476); +#56476 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#56477 = LINE('',#56478,#56479); +#56478 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#56479 = VECTOR('',#56480,1.); +#56480 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56481 = ORIENTED_EDGE('',*,*,#56482,.F.); +#56482 = EDGE_CURVE('',#56286,#56475,#56483,.T.); +#56483 = LINE('',#56484,#56485); +#56484 = CARTESIAN_POINT('',(1.455,-12.75,0.)); +#56485 = VECTOR('',#56486,1.); +#56486 = DIRECTION('',(0.,0.,1.)); +#56487 = ORIENTED_EDGE('',*,*,#56293,.F.); +#56488 = PLANE('',#56489); +#56489 = AXIS2_PLACEMENT_3D('',#56490,#56491,#56492); +#56490 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56491 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56492 = DIRECTION('',(-4.4E-16,1.,0.)); +#56493 = ADVANCED_FACE('',(#56494),#56512,.F.); +#56494 = FACE_BOUND('',#56495,.T.); +#56495 = EDGE_LOOP('',(#56496,#56497,#56505,#56511)); +#56496 = ORIENTED_EDGE('',*,*,#56285,.F.); +#56497 = ORIENTED_EDGE('',*,*,#56498,.T.); +#56498 = EDGE_CURVE('',#56277,#56499,#56501,.T.); +#56499 = VERTEX_POINT('',#56500); +#56500 = CARTESIAN_POINT('',(1.63,-12.75,0.4)); +#56501 = LINE('',#56502,#56503); +#56502 = CARTESIAN_POINT('',(1.63,-12.75,0.8)); +#56503 = VECTOR('',#56504,1.); +#56504 = DIRECTION('',(0.,0.,1.)); +#56505 = ORIENTED_EDGE('',*,*,#56506,.T.); +#56506 = EDGE_CURVE('',#56499,#56475,#56507,.T.); +#56507 = LINE('',#56508,#56509); +#56508 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56509 = VECTOR('',#56510,1.); +#56510 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56511 = ORIENTED_EDGE('',*,*,#56482,.F.); +#56512 = PLANE('',#56513); +#56513 = AXIS2_PLACEMENT_3D('',#56514,#56515,#56516); +#56514 = CARTESIAN_POINT('',(2.355,-12.75,0.)); +#56515 = DIRECTION('',(-4.4E-16,1.,0.)); +#56516 = DIRECTION('',(1.,4.4E-16,0.)); +#56517 = ADVANCED_FACE('',(#56518),#56538,.F.); +#56518 = FACE_BOUND('',#56519,.F.); +#56519 = EDGE_LOOP('',(#56520,#56521,#56522,#56530,#56537)); +#56520 = ORIENTED_EDGE('',*,*,#56276,.F.); +#56521 = ORIENTED_EDGE('',*,*,#56498,.T.); +#56522 = ORIENTED_EDGE('',*,*,#56523,.T.); +#56523 = EDGE_CURVE('',#56499,#56524,#56526,.T.); +#56524 = VERTEX_POINT('',#56525); +#56525 = CARTESIAN_POINT('',(1.63,-12.75,0.8)); +#56526 = LINE('',#56527,#56528); +#56527 = CARTESIAN_POINT('',(1.63,-12.75,0.8)); +#56528 = VECTOR('',#56529,1.); +#56529 = DIRECTION('',(0.,0.,1.)); +#56530 = ORIENTED_EDGE('',*,*,#56531,.T.); +#56531 = EDGE_CURVE('',#56524,#56357,#56532,.T.); +#56532 = CIRCLE('',#56533,0.275); +#56533 = AXIS2_PLACEMENT_3D('',#56534,#56535,#56536); +#56534 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#56535 = DIRECTION('',(0.,0.,-1.)); +#56536 = DIRECTION('',(-4.4E-16,1.,0.)); +#56537 = ORIENTED_EDGE('',*,*,#56356,.T.); +#56538 = CYLINDRICAL_SURFACE('',#56539,0.275); +#56539 = AXIS2_PLACEMENT_3D('',#56540,#56541,#56542); +#56540 = CARTESIAN_POINT('',(1.905,-12.75,0.8)); +#56541 = DIRECTION('',(0.,0.,1.)); +#56542 = DIRECTION('',(-4.4E-16,1.,0.)); +#56543 = ADVANCED_FACE('',(#56544),#56562,.T.); +#56544 = FACE_BOUND('',#56545,.F.); +#56545 = EDGE_LOOP('',(#56546,#56547,#56555,#56561)); +#56546 = ORIENTED_EDGE('',*,*,#56331,.T.); +#56547 = ORIENTED_EDGE('',*,*,#56548,.T.); +#56548 = EDGE_CURVE('',#56324,#56549,#56551,.T.); +#56549 = VERTEX_POINT('',#56550); +#56550 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#56551 = LINE('',#56552,#56553); +#56552 = CARTESIAN_POINT('',(2.355,-12.3,0.8)); +#56553 = VECTOR('',#56554,1.); +#56554 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56555 = ORIENTED_EDGE('',*,*,#56556,.F.); +#56556 = EDGE_CURVE('',#56430,#56549,#56557,.T.); +#56557 = LINE('',#56558,#56559); +#56558 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#56559 = VECTOR('',#56560,1.); +#56560 = DIRECTION('',(0.,0.,1.)); +#56561 = ORIENTED_EDGE('',*,*,#56437,.F.); +#56562 = PLANE('',#56563); +#56563 = AXIS2_PLACEMENT_3D('',#56564,#56565,#56566); +#56564 = CARTESIAN_POINT('',(2.355,-12.3,0.4)); +#56565 = DIRECTION('',(-4.4E-16,1.,0.)); +#56566 = DIRECTION('',(1.,4.4E-16,0.)); +#56567 = ADVANCED_FACE('',(#56568),#56589,.T.); +#56568 = FACE_BOUND('',#56569,.F.); +#56569 = EDGE_LOOP('',(#56570,#56571,#56572,#56573,#56574,#56582,#56588) + ); +#56570 = ORIENTED_EDGE('',*,*,#56323,.F.); +#56571 = ORIENTED_EDGE('',*,*,#56381,.T.); +#56572 = ORIENTED_EDGE('',*,*,#56364,.F.); +#56573 = ORIENTED_EDGE('',*,*,#56531,.F.); +#56574 = ORIENTED_EDGE('',*,*,#56575,.T.); +#56575 = EDGE_CURVE('',#56524,#56576,#56578,.T.); +#56576 = VERTEX_POINT('',#56577); +#56577 = CARTESIAN_POINT('',(1.455,-12.75,0.8)); +#56578 = LINE('',#56579,#56580); +#56579 = CARTESIAN_POINT('',(2.355,-12.75,0.8)); +#56580 = VECTOR('',#56581,1.); +#56581 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56582 = ORIENTED_EDGE('',*,*,#56583,.F.); +#56583 = EDGE_CURVE('',#56549,#56576,#56584,.T.); +#56584 = LINE('',#56585,#56586); +#56585 = CARTESIAN_POINT('',(1.455,-12.3,0.8)); +#56586 = VECTOR('',#56587,1.); +#56587 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56588 = ORIENTED_EDGE('',*,*,#56548,.F.); +#56589 = PLANE('',#56590); +#56590 = AXIS2_PLACEMENT_3D('',#56591,#56592,#56593); +#56591 = CARTESIAN_POINT('',(1.905,-12.525,0.8)); +#56592 = DIRECTION('',(0.,0.,1.)); +#56593 = DIRECTION('',(4.4E-16,-1.,0.)); +#56594 = ADVANCED_FACE('',(#56595),#56601,.T.); +#56595 = FACE_BOUND('',#56596,.F.); +#56596 = EDGE_LOOP('',(#56597,#56598,#56599,#56600)); +#56597 = ORIENTED_EDGE('',*,*,#56405,.T.); +#56598 = ORIENTED_EDGE('',*,*,#56453,.T.); +#56599 = ORIENTED_EDGE('',*,*,#56429,.F.); +#56600 = ORIENTED_EDGE('',*,*,#56468,.F.); +#56601 = PLANE('',#56602); +#56602 = AXIS2_PLACEMENT_3D('',#56603,#56604,#56605); +#56603 = CARTESIAN_POINT('',(1.455,-12.3,0.)); +#56604 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56605 = DIRECTION('',(0.,-0.,-1.)); +#56606 = ADVANCED_FACE('',(#56607),#56618,.T.); +#56607 = FACE_BOUND('',#56608,.F.); +#56608 = EDGE_LOOP('',(#56609,#56610,#56611,#56617)); +#56609 = ORIENTED_EDGE('',*,*,#56556,.T.); +#56610 = ORIENTED_EDGE('',*,*,#56583,.T.); +#56611 = ORIENTED_EDGE('',*,*,#56612,.F.); +#56612 = EDGE_CURVE('',#56475,#56576,#56613,.T.); +#56613 = LINE('',#56614,#56615); +#56614 = CARTESIAN_POINT('',(1.455,-12.75,0.4)); +#56615 = VECTOR('',#56616,1.); +#56616 = DIRECTION('',(0.,0.,1.)); +#56617 = ORIENTED_EDGE('',*,*,#56474,.F.); +#56618 = PLANE('',#56619); +#56619 = AXIS2_PLACEMENT_3D('',#56620,#56621,#56622); +#56620 = CARTESIAN_POINT('',(1.455,-12.3,0.4)); +#56621 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56622 = DIRECTION('',(-4.4E-16,1.,0.)); +#56623 = ADVANCED_FACE('',(#56624),#56630,.F.); +#56624 = FACE_BOUND('',#56625,.T.); +#56625 = EDGE_LOOP('',(#56626,#56627,#56628,#56629)); +#56626 = ORIENTED_EDGE('',*,*,#56506,.F.); +#56627 = ORIENTED_EDGE('',*,*,#56523,.T.); +#56628 = ORIENTED_EDGE('',*,*,#56575,.T.); +#56629 = ORIENTED_EDGE('',*,*,#56612,.F.); +#56630 = PLANE('',#56631); +#56631 = AXIS2_PLACEMENT_3D('',#56632,#56633,#56634); +#56632 = CARTESIAN_POINT('',(2.355,-12.75,0.4)); +#56633 = DIRECTION('',(-4.4E-16,1.,0.)); +#56634 = DIRECTION('',(1.,4.4E-16,0.)); +#56635 = MANIFOLD_SOLID_BREP('',#56636); +#56636 = CLOSED_SHELL('',(#56637,#56677,#56708,#56739,#56789,#56820, + #56853,#56870,#56894,#56925,#56942,#56971,#56995,#57021,#57045, + #57072,#57084,#57101)); +#56637 = ADVANCED_FACE('',(#56638),#56672,.T.); +#56638 = FACE_BOUND('',#56639,.F.); +#56639 = EDGE_LOOP('',(#56640,#56650,#56658,#56666)); +#56640 = ORIENTED_EDGE('',*,*,#56641,.T.); +#56641 = EDGE_CURVE('',#56642,#56644,#56646,.T.); +#56642 = VERTEX_POINT('',#56643); +#56643 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56644 = VERTEX_POINT('',#56645); +#56645 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56646 = LINE('',#56647,#56648); +#56647 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56648 = VECTOR('',#56649,1.); +#56649 = DIRECTION('',(0.,0.,1.)); +#56650 = ORIENTED_EDGE('',*,*,#56651,.T.); +#56651 = EDGE_CURVE('',#56644,#56652,#56654,.T.); +#56652 = VERTEX_POINT('',#56653); +#56653 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#56654 = LINE('',#56655,#56656); +#56655 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56656 = VECTOR('',#56657,1.); +#56657 = DIRECTION('',(-4.4E-16,1.,0.)); +#56658 = ORIENTED_EDGE('',*,*,#56659,.F.); +#56659 = EDGE_CURVE('',#56660,#56652,#56662,.T.); +#56660 = VERTEX_POINT('',#56661); +#56661 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56662 = LINE('',#56663,#56664); +#56663 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56664 = VECTOR('',#56665,1.); +#56665 = DIRECTION('',(0.,0.,1.)); +#56666 = ORIENTED_EDGE('',*,*,#56667,.F.); +#56667 = EDGE_CURVE('',#56642,#56660,#56668,.T.); +#56668 = LINE('',#56669,#56670); +#56669 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56670 = VECTOR('',#56671,1.); +#56671 = DIRECTION('',(-4.4E-16,1.,0.)); +#56672 = PLANE('',#56673); +#56673 = AXIS2_PLACEMENT_3D('',#56674,#56675,#56676); +#56674 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56675 = DIRECTION('',(1.,4.4E-16,0.)); +#56676 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56677 = ADVANCED_FACE('',(#56678),#56703,.F.); +#56678 = FACE_BOUND('',#56679,.T.); +#56679 = EDGE_LOOP('',(#56680,#56688,#56689,#56697)); +#56680 = ORIENTED_EDGE('',*,*,#56681,.F.); +#56681 = EDGE_CURVE('',#56642,#56682,#56684,.T.); +#56682 = VERTEX_POINT('',#56683); +#56683 = CARTESIAN_POINT('',(0.91,-12.75,0.)); +#56684 = LINE('',#56685,#56686); +#56685 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56686 = VECTOR('',#56687,1.); +#56687 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56688 = ORIENTED_EDGE('',*,*,#56641,.T.); +#56689 = ORIENTED_EDGE('',*,*,#56690,.T.); +#56690 = EDGE_CURVE('',#56644,#56691,#56693,.T.); +#56691 = VERTEX_POINT('',#56692); +#56692 = CARTESIAN_POINT('',(0.91,-12.75,0.4)); +#56693 = LINE('',#56694,#56695); +#56694 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56695 = VECTOR('',#56696,1.); +#56696 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56697 = ORIENTED_EDGE('',*,*,#56698,.F.); +#56698 = EDGE_CURVE('',#56682,#56691,#56699,.T.); +#56699 = LINE('',#56700,#56701); +#56700 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#56701 = VECTOR('',#56702,1.); +#56702 = DIRECTION('',(0.,0.,1.)); +#56703 = PLANE('',#56704); +#56704 = AXIS2_PLACEMENT_3D('',#56705,#56706,#56707); +#56705 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56706 = DIRECTION('',(-4.4E-16,1.,0.)); +#56707 = DIRECTION('',(1.,4.4E-16,0.)); +#56708 = ADVANCED_FACE('',(#56709),#56734,.F.); +#56709 = FACE_BOUND('',#56710,.T.); +#56710 = EDGE_LOOP('',(#56711,#56719,#56727,#56733)); +#56711 = ORIENTED_EDGE('',*,*,#56712,.T.); +#56712 = EDGE_CURVE('',#56660,#56713,#56715,.T.); +#56713 = VERTEX_POINT('',#56714); +#56714 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#56715 = LINE('',#56716,#56717); +#56716 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56717 = VECTOR('',#56718,1.); +#56718 = DIRECTION('',(-4.4E-16,1.,0.)); +#56719 = ORIENTED_EDGE('',*,*,#56720,.T.); +#56720 = EDGE_CURVE('',#56713,#56721,#56723,.T.); +#56721 = VERTEX_POINT('',#56722); +#56722 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#56723 = LINE('',#56724,#56725); +#56724 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#56725 = VECTOR('',#56726,1.); +#56726 = DIRECTION('',(0.,0.,1.)); +#56727 = ORIENTED_EDGE('',*,*,#56728,.F.); +#56728 = EDGE_CURVE('',#56652,#56721,#56729,.T.); +#56729 = LINE('',#56730,#56731); +#56730 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#56731 = VECTOR('',#56732,1.); +#56732 = DIRECTION('',(-4.4E-16,1.,0.)); +#56733 = ORIENTED_EDGE('',*,*,#56659,.F.); +#56734 = PLANE('',#56735); +#56735 = AXIS2_PLACEMENT_3D('',#56736,#56737,#56738); +#56736 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56737 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56738 = DIRECTION('',(0.,-0.,-1.)); +#56739 = ADVANCED_FACE('',(#56740),#56784,.F.); +#56740 = FACE_BOUND('',#56741,.T.); +#56741 = EDGE_LOOP('',(#56742,#56743,#56744,#56753,#56762,#56770,#56778) + ); +#56742 = ORIENTED_EDGE('',*,*,#56667,.F.); +#56743 = ORIENTED_EDGE('',*,*,#56681,.T.); +#56744 = ORIENTED_EDGE('',*,*,#56745,.F.); +#56745 = EDGE_CURVE('',#56746,#56682,#56748,.T.); +#56746 = VERTEX_POINT('',#56747); +#56747 = CARTESIAN_POINT('',(0.635,-12.475,0.)); +#56748 = CIRCLE('',#56749,0.275); +#56749 = AXIS2_PLACEMENT_3D('',#56750,#56751,#56752); +#56750 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#56751 = DIRECTION('',(0.,0.,-1.)); +#56752 = DIRECTION('',(-4.4E-16,1.,0.)); +#56753 = ORIENTED_EDGE('',*,*,#56754,.F.); +#56754 = EDGE_CURVE('',#56755,#56746,#56757,.T.); +#56755 = VERTEX_POINT('',#56756); +#56756 = CARTESIAN_POINT('',(0.36,-12.75,0.)); +#56757 = CIRCLE('',#56758,0.275); +#56758 = AXIS2_PLACEMENT_3D('',#56759,#56760,#56761); +#56759 = CARTESIAN_POINT('',(0.635,-12.75,0.)); +#56760 = DIRECTION('',(0.,0.,-1.)); +#56761 = DIRECTION('',(-4.4E-16,1.,0.)); +#56762 = ORIENTED_EDGE('',*,*,#56763,.T.); +#56763 = EDGE_CURVE('',#56755,#56764,#56766,.T.); +#56764 = VERTEX_POINT('',#56765); +#56765 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#56766 = LINE('',#56767,#56768); +#56767 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56768 = VECTOR('',#56769,1.); +#56769 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56770 = ORIENTED_EDGE('',*,*,#56771,.F.); +#56771 = EDGE_CURVE('',#56772,#56764,#56774,.T.); +#56772 = VERTEX_POINT('',#56773); +#56773 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#56774 = LINE('',#56775,#56776); +#56775 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#56776 = VECTOR('',#56777,1.); +#56777 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56778 = ORIENTED_EDGE('',*,*,#56779,.F.); +#56779 = EDGE_CURVE('',#56660,#56772,#56780,.T.); +#56780 = LINE('',#56781,#56782); +#56781 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56782 = VECTOR('',#56783,1.); +#56783 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56784 = PLANE('',#56785); +#56785 = AXIS2_PLACEMENT_3D('',#56786,#56787,#56788); +#56786 = CARTESIAN_POINT('',(0.635,-12.525,0.)); +#56787 = DIRECTION('',(0.,0.,1.)); +#56788 = DIRECTION('',(4.4E-16,-1.,0.)); +#56789 = ADVANCED_FACE('',(#56790),#56815,.T.); +#56790 = FACE_BOUND('',#56791,.F.); +#56791 = EDGE_LOOP('',(#56792,#56800,#56808,#56814)); +#56792 = ORIENTED_EDGE('',*,*,#56793,.T.); +#56793 = EDGE_CURVE('',#56644,#56794,#56796,.T.); +#56794 = VERTEX_POINT('',#56795); +#56795 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#56796 = LINE('',#56797,#56798); +#56797 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56798 = VECTOR('',#56799,1.); +#56799 = DIRECTION('',(0.,0.,1.)); +#56800 = ORIENTED_EDGE('',*,*,#56801,.T.); +#56801 = EDGE_CURVE('',#56794,#56802,#56804,.T.); +#56802 = VERTEX_POINT('',#56803); +#56803 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#56804 = LINE('',#56805,#56806); +#56805 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#56806 = VECTOR('',#56807,1.); +#56807 = DIRECTION('',(-4.4E-16,1.,0.)); +#56808 = ORIENTED_EDGE('',*,*,#56809,.F.); +#56809 = EDGE_CURVE('',#56652,#56802,#56810,.T.); +#56810 = LINE('',#56811,#56812); +#56811 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#56812 = VECTOR('',#56813,1.); +#56813 = DIRECTION('',(0.,0.,1.)); +#56814 = ORIENTED_EDGE('',*,*,#56651,.F.); +#56815 = PLANE('',#56816); +#56816 = AXIS2_PLACEMENT_3D('',#56817,#56818,#56819); +#56817 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56818 = DIRECTION('',(1.,4.4E-16,0.)); +#56819 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56820 = ADVANCED_FACE('',(#56821),#56848,.F.); +#56821 = FACE_BOUND('',#56822,.F.); +#56822 = EDGE_LOOP('',(#56823,#56831,#56832,#56833,#56841)); +#56823 = ORIENTED_EDGE('',*,*,#56824,.F.); +#56824 = EDGE_CURVE('',#56691,#56825,#56827,.T.); +#56825 = VERTEX_POINT('',#56826); +#56826 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#56827 = LINE('',#56828,#56829); +#56828 = CARTESIAN_POINT('',(0.91,-12.75,0.8)); +#56829 = VECTOR('',#56830,1.); +#56830 = DIRECTION('',(0.,0.,1.)); +#56831 = ORIENTED_EDGE('',*,*,#56698,.F.); +#56832 = ORIENTED_EDGE('',*,*,#56745,.F.); +#56833 = ORIENTED_EDGE('',*,*,#56834,.F.); +#56834 = EDGE_CURVE('',#56835,#56746,#56837,.T.); +#56835 = VERTEX_POINT('',#56836); +#56836 = CARTESIAN_POINT('',(0.635,-12.475,0.8)); +#56837 = LINE('',#56838,#56839); +#56838 = CARTESIAN_POINT('',(0.635,-12.475,0.8)); +#56839 = VECTOR('',#56840,1.); +#56840 = DIRECTION('',(0.,-0.,-1.)); +#56841 = ORIENTED_EDGE('',*,*,#56842,.T.); +#56842 = EDGE_CURVE('',#56835,#56825,#56843,.T.); +#56843 = CIRCLE('',#56844,0.275); +#56844 = AXIS2_PLACEMENT_3D('',#56845,#56846,#56847); +#56845 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#56846 = DIRECTION('',(0.,0.,-1.)); +#56847 = DIRECTION('',(-4.4E-16,1.,0.)); +#56848 = CYLINDRICAL_SURFACE('',#56849,0.275); +#56849 = AXIS2_PLACEMENT_3D('',#56850,#56851,#56852); +#56850 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#56851 = DIRECTION('',(0.,0.,1.)); +#56852 = DIRECTION('',(-4.4E-16,1.,0.)); +#56853 = ADVANCED_FACE('',(#56854),#56865,.F.); +#56854 = FACE_BOUND('',#56855,.T.); +#56855 = EDGE_LOOP('',(#56856,#56857,#56858,#56864)); +#56856 = ORIENTED_EDGE('',*,*,#56690,.F.); +#56857 = ORIENTED_EDGE('',*,*,#56793,.T.); +#56858 = ORIENTED_EDGE('',*,*,#56859,.T.); +#56859 = EDGE_CURVE('',#56794,#56825,#56860,.T.); +#56860 = LINE('',#56861,#56862); +#56861 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#56862 = VECTOR('',#56863,1.); +#56863 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56864 = ORIENTED_EDGE('',*,*,#56824,.F.); +#56865 = PLANE('',#56866); +#56866 = AXIS2_PLACEMENT_3D('',#56867,#56868,#56869); +#56867 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56868 = DIRECTION('',(-4.4E-16,1.,0.)); +#56869 = DIRECTION('',(1.,4.4E-16,0.)); +#56870 = ADVANCED_FACE('',(#56871),#56889,.T.); +#56871 = FACE_BOUND('',#56872,.F.); +#56872 = EDGE_LOOP('',(#56873,#56874,#56882,#56888)); +#56873 = ORIENTED_EDGE('',*,*,#56712,.T.); +#56874 = ORIENTED_EDGE('',*,*,#56875,.T.); +#56875 = EDGE_CURVE('',#56713,#56876,#56878,.T.); +#56876 = VERTEX_POINT('',#56877); +#56877 = CARTESIAN_POINT('',(0.185,-11.9,0.)); +#56878 = LINE('',#56879,#56880); +#56879 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#56880 = VECTOR('',#56881,1.); +#56881 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56882 = ORIENTED_EDGE('',*,*,#56883,.F.); +#56883 = EDGE_CURVE('',#56772,#56876,#56884,.T.); +#56884 = LINE('',#56885,#56886); +#56885 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#56886 = VECTOR('',#56887,1.); +#56887 = DIRECTION('',(-4.4E-16,1.,0.)); +#56888 = ORIENTED_EDGE('',*,*,#56779,.F.); +#56889 = PLANE('',#56890); +#56890 = AXIS2_PLACEMENT_3D('',#56891,#56892,#56893); +#56891 = CARTESIAN_POINT('',(1.085,-12.3,0.)); +#56892 = DIRECTION('',(0.,0.,-1.)); +#56893 = DIRECTION('',(1.,4.4E-16,0.)); +#56894 = ADVANCED_FACE('',(#56895),#56920,.F.); +#56895 = FACE_BOUND('',#56896,.T.); +#56896 = EDGE_LOOP('',(#56897,#56898,#56906,#56914)); +#56897 = ORIENTED_EDGE('',*,*,#56728,.T.); +#56898 = ORIENTED_EDGE('',*,*,#56899,.T.); +#56899 = EDGE_CURVE('',#56721,#56900,#56902,.T.); +#56900 = VERTEX_POINT('',#56901); +#56901 = CARTESIAN_POINT('',(0.185,-11.9,0.4)); +#56902 = LINE('',#56903,#56904); +#56903 = CARTESIAN_POINT('',(1.085,-11.9,0.4)); +#56904 = VECTOR('',#56905,1.); +#56905 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56906 = ORIENTED_EDGE('',*,*,#56907,.F.); +#56907 = EDGE_CURVE('',#56908,#56900,#56910,.T.); +#56908 = VERTEX_POINT('',#56909); +#56909 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#56910 = LINE('',#56911,#56912); +#56911 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#56912 = VECTOR('',#56913,1.); +#56913 = DIRECTION('',(-4.4E-16,1.,0.)); +#56914 = ORIENTED_EDGE('',*,*,#56915,.F.); +#56915 = EDGE_CURVE('',#56652,#56908,#56916,.T.); +#56916 = LINE('',#56917,#56918); +#56917 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#56918 = VECTOR('',#56919,1.); +#56919 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56920 = PLANE('',#56921); +#56921 = AXIS2_PLACEMENT_3D('',#56922,#56923,#56924); +#56922 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#56923 = DIRECTION('',(0.,0.,-1.)); +#56924 = DIRECTION('',(1.,4.4E-16,0.)); +#56925 = ADVANCED_FACE('',(#56926),#56937,.T.); +#56926 = FACE_BOUND('',#56927,.F.); +#56927 = EDGE_LOOP('',(#56928,#56929,#56930,#56936)); +#56928 = ORIENTED_EDGE('',*,*,#56720,.T.); +#56929 = ORIENTED_EDGE('',*,*,#56899,.T.); +#56930 = ORIENTED_EDGE('',*,*,#56931,.F.); +#56931 = EDGE_CURVE('',#56876,#56900,#56932,.T.); +#56932 = LINE('',#56933,#56934); +#56933 = CARTESIAN_POINT('',(0.185,-11.9,0.)); +#56934 = VECTOR('',#56935,1.); +#56935 = DIRECTION('',(0.,0.,1.)); +#56936 = ORIENTED_EDGE('',*,*,#56875,.F.); +#56937 = PLANE('',#56938); +#56938 = AXIS2_PLACEMENT_3D('',#56939,#56940,#56941); +#56939 = CARTESIAN_POINT('',(1.085,-11.9,0.)); +#56940 = DIRECTION('',(-4.4E-16,1.,0.)); +#56941 = DIRECTION('',(1.,4.4E-16,0.)); +#56942 = ADVANCED_FACE('',(#56943),#56966,.T.); +#56943 = FACE_BOUND('',#56944,.F.); +#56944 = EDGE_LOOP('',(#56945,#56951,#56959,#56965)); +#56945 = ORIENTED_EDGE('',*,*,#56946,.T.); +#56946 = EDGE_CURVE('',#56772,#56908,#56947,.T.); +#56947 = LINE('',#56948,#56949); +#56948 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#56949 = VECTOR('',#56950,1.); +#56950 = DIRECTION('',(0.,0.,1.)); +#56951 = ORIENTED_EDGE('',*,*,#56952,.T.); +#56952 = EDGE_CURVE('',#56908,#56953,#56955,.T.); +#56953 = VERTEX_POINT('',#56954); +#56954 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#56955 = LINE('',#56956,#56957); +#56956 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#56957 = VECTOR('',#56958,1.); +#56958 = DIRECTION('',(4.4E-16,-1.,-0.)); +#56959 = ORIENTED_EDGE('',*,*,#56960,.F.); +#56960 = EDGE_CURVE('',#56764,#56953,#56961,.T.); +#56961 = LINE('',#56962,#56963); +#56962 = CARTESIAN_POINT('',(0.185,-12.75,0.)); +#56963 = VECTOR('',#56964,1.); +#56964 = DIRECTION('',(0.,0.,1.)); +#56965 = ORIENTED_EDGE('',*,*,#56771,.F.); +#56966 = PLANE('',#56967); +#56967 = AXIS2_PLACEMENT_3D('',#56968,#56969,#56970); +#56968 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#56969 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56970 = DIRECTION('',(-4.4E-16,1.,0.)); +#56971 = ADVANCED_FACE('',(#56972),#56990,.F.); +#56972 = FACE_BOUND('',#56973,.T.); +#56973 = EDGE_LOOP('',(#56974,#56975,#56983,#56989)); +#56974 = ORIENTED_EDGE('',*,*,#56763,.F.); +#56975 = ORIENTED_EDGE('',*,*,#56976,.T.); +#56976 = EDGE_CURVE('',#56755,#56977,#56979,.T.); +#56977 = VERTEX_POINT('',#56978); +#56978 = CARTESIAN_POINT('',(0.36,-12.75,0.4)); +#56979 = LINE('',#56980,#56981); +#56980 = CARTESIAN_POINT('',(0.36,-12.75,0.8)); +#56981 = VECTOR('',#56982,1.); +#56982 = DIRECTION('',(0.,0.,1.)); +#56983 = ORIENTED_EDGE('',*,*,#56984,.T.); +#56984 = EDGE_CURVE('',#56977,#56953,#56985,.T.); +#56985 = LINE('',#56986,#56987); +#56986 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#56987 = VECTOR('',#56988,1.); +#56988 = DIRECTION('',(-1.,-4.4E-16,0.)); +#56989 = ORIENTED_EDGE('',*,*,#56960,.F.); +#56990 = PLANE('',#56991); +#56991 = AXIS2_PLACEMENT_3D('',#56992,#56993,#56994); +#56992 = CARTESIAN_POINT('',(1.085,-12.75,0.)); +#56993 = DIRECTION('',(-4.4E-16,1.,0.)); +#56994 = DIRECTION('',(1.,4.4E-16,0.)); +#56995 = ADVANCED_FACE('',(#56996),#57016,.F.); +#56996 = FACE_BOUND('',#56997,.F.); +#56997 = EDGE_LOOP('',(#56998,#56999,#57000,#57008,#57015)); +#56998 = ORIENTED_EDGE('',*,*,#56754,.F.); +#56999 = ORIENTED_EDGE('',*,*,#56976,.T.); +#57000 = ORIENTED_EDGE('',*,*,#57001,.T.); +#57001 = EDGE_CURVE('',#56977,#57002,#57004,.T.); +#57002 = VERTEX_POINT('',#57003); +#57003 = CARTESIAN_POINT('',(0.36,-12.75,0.8)); +#57004 = LINE('',#57005,#57006); +#57005 = CARTESIAN_POINT('',(0.36,-12.75,0.8)); +#57006 = VECTOR('',#57007,1.); +#57007 = DIRECTION('',(0.,0.,1.)); +#57008 = ORIENTED_EDGE('',*,*,#57009,.T.); +#57009 = EDGE_CURVE('',#57002,#56835,#57010,.T.); +#57010 = CIRCLE('',#57011,0.275); +#57011 = AXIS2_PLACEMENT_3D('',#57012,#57013,#57014); +#57012 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#57013 = DIRECTION('',(0.,0.,-1.)); +#57014 = DIRECTION('',(-4.4E-16,1.,0.)); +#57015 = ORIENTED_EDGE('',*,*,#56834,.T.); +#57016 = CYLINDRICAL_SURFACE('',#57017,0.275); +#57017 = AXIS2_PLACEMENT_3D('',#57018,#57019,#57020); +#57018 = CARTESIAN_POINT('',(0.635,-12.75,0.8)); +#57019 = DIRECTION('',(0.,0.,1.)); +#57020 = DIRECTION('',(-4.4E-16,1.,0.)); +#57021 = ADVANCED_FACE('',(#57022),#57040,.T.); +#57022 = FACE_BOUND('',#57023,.F.); +#57023 = EDGE_LOOP('',(#57024,#57025,#57033,#57039)); +#57024 = ORIENTED_EDGE('',*,*,#56809,.T.); +#57025 = ORIENTED_EDGE('',*,*,#57026,.T.); +#57026 = EDGE_CURVE('',#56802,#57027,#57029,.T.); +#57027 = VERTEX_POINT('',#57028); +#57028 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#57029 = LINE('',#57030,#57031); +#57030 = CARTESIAN_POINT('',(1.085,-12.3,0.8)); +#57031 = VECTOR('',#57032,1.); +#57032 = DIRECTION('',(-1.,-4.4E-16,0.)); +#57033 = ORIENTED_EDGE('',*,*,#57034,.F.); +#57034 = EDGE_CURVE('',#56908,#57027,#57035,.T.); +#57035 = LINE('',#57036,#57037); +#57036 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#57037 = VECTOR('',#57038,1.); +#57038 = DIRECTION('',(0.,0.,1.)); +#57039 = ORIENTED_EDGE('',*,*,#56915,.F.); +#57040 = PLANE('',#57041); +#57041 = AXIS2_PLACEMENT_3D('',#57042,#57043,#57044); +#57042 = CARTESIAN_POINT('',(1.085,-12.3,0.4)); +#57043 = DIRECTION('',(-4.4E-16,1.,0.)); +#57044 = DIRECTION('',(1.,4.4E-16,0.)); +#57045 = ADVANCED_FACE('',(#57046),#57067,.T.); +#57046 = FACE_BOUND('',#57047,.F.); +#57047 = EDGE_LOOP('',(#57048,#57049,#57050,#57051,#57052,#57060,#57066) + ); +#57048 = ORIENTED_EDGE('',*,*,#56801,.F.); +#57049 = ORIENTED_EDGE('',*,*,#56859,.T.); +#57050 = ORIENTED_EDGE('',*,*,#56842,.F.); +#57051 = ORIENTED_EDGE('',*,*,#57009,.F.); +#57052 = ORIENTED_EDGE('',*,*,#57053,.T.); +#57053 = EDGE_CURVE('',#57002,#57054,#57056,.T.); +#57054 = VERTEX_POINT('',#57055); +#57055 = CARTESIAN_POINT('',(0.185,-12.75,0.8)); +#57056 = LINE('',#57057,#57058); +#57057 = CARTESIAN_POINT('',(1.085,-12.75,0.8)); +#57058 = VECTOR('',#57059,1.); +#57059 = DIRECTION('',(-1.,-4.4E-16,0.)); +#57060 = ORIENTED_EDGE('',*,*,#57061,.F.); +#57061 = EDGE_CURVE('',#57027,#57054,#57062,.T.); +#57062 = LINE('',#57063,#57064); +#57063 = CARTESIAN_POINT('',(0.185,-12.3,0.8)); +#57064 = VECTOR('',#57065,1.); +#57065 = DIRECTION('',(4.4E-16,-1.,-0.)); +#57066 = ORIENTED_EDGE('',*,*,#57026,.F.); +#57067 = PLANE('',#57068); +#57068 = AXIS2_PLACEMENT_3D('',#57069,#57070,#57071); +#57069 = CARTESIAN_POINT('',(0.635,-12.525,0.8)); +#57070 = DIRECTION('',(0.,0.,1.)); +#57071 = DIRECTION('',(4.4E-16,-1.,0.)); +#57072 = ADVANCED_FACE('',(#57073),#57079,.T.); +#57073 = FACE_BOUND('',#57074,.F.); +#57074 = EDGE_LOOP('',(#57075,#57076,#57077,#57078)); +#57075 = ORIENTED_EDGE('',*,*,#56883,.T.); +#57076 = ORIENTED_EDGE('',*,*,#56931,.T.); +#57077 = ORIENTED_EDGE('',*,*,#56907,.F.); +#57078 = ORIENTED_EDGE('',*,*,#56946,.F.); +#57079 = PLANE('',#57080); +#57080 = AXIS2_PLACEMENT_3D('',#57081,#57082,#57083); +#57081 = CARTESIAN_POINT('',(0.185,-12.3,0.)); +#57082 = DIRECTION('',(-1.,-4.4E-16,0.)); +#57083 = DIRECTION('',(0.,-0.,-1.)); +#57084 = ADVANCED_FACE('',(#57085),#57096,.T.); +#57085 = FACE_BOUND('',#57086,.F.); +#57086 = EDGE_LOOP('',(#57087,#57088,#57089,#57095)); +#57087 = ORIENTED_EDGE('',*,*,#57034,.T.); +#57088 = ORIENTED_EDGE('',*,*,#57061,.T.); +#57089 = ORIENTED_EDGE('',*,*,#57090,.F.); +#57090 = EDGE_CURVE('',#56953,#57054,#57091,.T.); +#57091 = LINE('',#57092,#57093); +#57092 = CARTESIAN_POINT('',(0.185,-12.75,0.4)); +#57093 = VECTOR('',#57094,1.); +#57094 = DIRECTION('',(0.,0.,1.)); +#57095 = ORIENTED_EDGE('',*,*,#56952,.F.); +#57096 = PLANE('',#57097); +#57097 = AXIS2_PLACEMENT_3D('',#57098,#57099,#57100); +#57098 = CARTESIAN_POINT('',(0.185,-12.3,0.4)); +#57099 = DIRECTION('',(-1.,-4.4E-16,0.)); +#57100 = DIRECTION('',(-4.4E-16,1.,0.)); +#57101 = ADVANCED_FACE('',(#57102),#57108,.F.); +#57102 = FACE_BOUND('',#57103,.T.); +#57103 = EDGE_LOOP('',(#57104,#57105,#57106,#57107)); +#57104 = ORIENTED_EDGE('',*,*,#56984,.F.); +#57105 = ORIENTED_EDGE('',*,*,#57001,.T.); +#57106 = ORIENTED_EDGE('',*,*,#57053,.T.); +#57107 = ORIENTED_EDGE('',*,*,#57090,.F.); +#57108 = PLANE('',#57109); +#57109 = AXIS2_PLACEMENT_3D('',#57110,#57111,#57112); +#57110 = CARTESIAN_POINT('',(1.085,-12.75,0.4)); +#57111 = DIRECTION('',(-4.4E-16,1.,0.)); +#57112 = DIRECTION('',(1.,4.4E-16,0.)); +#57113 = MANIFOLD_SOLID_BREP('',#57114); +#57114 = CLOSED_SHELL('',(#57115,#57155,#57186,#57217,#57267,#57298, + #57331,#57348,#57372,#57403,#57420,#57449,#57473,#57499,#57523, + #57550,#57562,#57579)); +#57115 = ADVANCED_FACE('',(#57116),#57150,.T.); +#57116 = FACE_BOUND('',#57117,.F.); +#57117 = EDGE_LOOP('',(#57118,#57128,#57136,#57144)); +#57118 = ORIENTED_EDGE('',*,*,#57119,.T.); +#57119 = EDGE_CURVE('',#57120,#57122,#57124,.T.); +#57120 = VERTEX_POINT('',#57121); +#57121 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57122 = VERTEX_POINT('',#57123); +#57123 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57124 = LINE('',#57125,#57126); +#57125 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57126 = VECTOR('',#57127,1.); +#57127 = DIRECTION('',(0.,0.,1.)); +#57128 = ORIENTED_EDGE('',*,*,#57129,.T.); +#57129 = EDGE_CURVE('',#57122,#57130,#57132,.T.); +#57130 = VERTEX_POINT('',#57131); +#57131 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57132 = LINE('',#57133,#57134); +#57133 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57134 = VECTOR('',#57135,1.); +#57135 = DIRECTION('',(-1.,-0.,-0.)); +#57136 = ORIENTED_EDGE('',*,*,#57137,.F.); +#57137 = EDGE_CURVE('',#57138,#57130,#57140,.T.); +#57138 = VERTEX_POINT('',#57139); +#57139 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57140 = LINE('',#57141,#57142); +#57141 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57142 = VECTOR('',#57143,1.); +#57143 = DIRECTION('',(0.,0.,1.)); +#57144 = ORIENTED_EDGE('',*,*,#57145,.F.); +#57145 = EDGE_CURVE('',#57120,#57138,#57146,.T.); +#57146 = LINE('',#57147,#57148); +#57147 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57148 = VECTOR('',#57149,1.); +#57149 = DIRECTION('',(-1.,-0.,-0.)); +#57150 = PLANE('',#57151); +#57151 = AXIS2_PLACEMENT_3D('',#57152,#57153,#57154); +#57152 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57153 = DIRECTION('',(0.,1.,0.)); +#57154 = DIRECTION('',(1.,0.,0.)); +#57155 = ADVANCED_FACE('',(#57156),#57181,.F.); +#57156 = FACE_BOUND('',#57157,.T.); +#57157 = EDGE_LOOP('',(#57158,#57166,#57167,#57175)); +#57158 = ORIENTED_EDGE('',*,*,#57159,.F.); +#57159 = EDGE_CURVE('',#57120,#57160,#57162,.T.); +#57160 = VERTEX_POINT('',#57161); +#57161 = CARTESIAN_POINT('',(9.,5.535,0.)); +#57162 = LINE('',#57163,#57164); +#57163 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57164 = VECTOR('',#57165,1.); +#57165 = DIRECTION('',(-0.,-1.,-0.)); +#57166 = ORIENTED_EDGE('',*,*,#57119,.T.); +#57167 = ORIENTED_EDGE('',*,*,#57168,.T.); +#57168 = EDGE_CURVE('',#57122,#57169,#57171,.T.); +#57169 = VERTEX_POINT('',#57170); +#57170 = CARTESIAN_POINT('',(9.,5.535,0.4)); +#57171 = LINE('',#57172,#57173); +#57172 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57173 = VECTOR('',#57174,1.); +#57174 = DIRECTION('',(-0.,-1.,-0.)); +#57175 = ORIENTED_EDGE('',*,*,#57176,.F.); +#57176 = EDGE_CURVE('',#57160,#57169,#57177,.T.); +#57177 = LINE('',#57178,#57179); +#57178 = CARTESIAN_POINT('',(9.,5.535,0.8)); +#57179 = VECTOR('',#57180,1.); +#57180 = DIRECTION('',(0.,0.,1.)); +#57181 = PLANE('',#57182); +#57182 = AXIS2_PLACEMENT_3D('',#57183,#57184,#57185); +#57183 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57184 = DIRECTION('',(-1.,-0.,-0.)); +#57185 = DIRECTION('',(0.,1.,0.)); +#57186 = ADVANCED_FACE('',(#57187),#57212,.F.); +#57187 = FACE_BOUND('',#57188,.T.); +#57188 = EDGE_LOOP('',(#57189,#57197,#57205,#57211)); +#57189 = ORIENTED_EDGE('',*,*,#57190,.T.); +#57190 = EDGE_CURVE('',#57138,#57191,#57193,.T.); +#57191 = VERTEX_POINT('',#57192); +#57192 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#57193 = LINE('',#57194,#57195); +#57194 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57195 = VECTOR('',#57196,1.); +#57196 = DIRECTION('',(-1.,-0.,-0.)); +#57197 = ORIENTED_EDGE('',*,*,#57198,.T.); +#57198 = EDGE_CURVE('',#57191,#57199,#57201,.T.); +#57199 = VERTEX_POINT('',#57200); +#57200 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#57201 = LINE('',#57202,#57203); +#57202 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#57203 = VECTOR('',#57204,1.); +#57204 = DIRECTION('',(0.,0.,1.)); +#57205 = ORIENTED_EDGE('',*,*,#57206,.F.); +#57206 = EDGE_CURVE('',#57130,#57199,#57207,.T.); +#57207 = LINE('',#57208,#57209); +#57208 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57209 = VECTOR('',#57210,1.); +#57210 = DIRECTION('',(-1.,-0.,-0.)); +#57211 = ORIENTED_EDGE('',*,*,#57137,.F.); +#57212 = PLANE('',#57213); +#57213 = AXIS2_PLACEMENT_3D('',#57214,#57215,#57216); +#57214 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57215 = DIRECTION('',(-0.,-1.,-0.)); +#57216 = DIRECTION('',(0.,0.,-1.)); +#57217 = ADVANCED_FACE('',(#57218),#57262,.F.); +#57218 = FACE_BOUND('',#57219,.T.); +#57219 = EDGE_LOOP('',(#57220,#57221,#57222,#57231,#57240,#57248,#57256) + ); +#57220 = ORIENTED_EDGE('',*,*,#57145,.F.); +#57221 = ORIENTED_EDGE('',*,*,#57159,.T.); +#57222 = ORIENTED_EDGE('',*,*,#57223,.F.); +#57223 = EDGE_CURVE('',#57224,#57160,#57226,.T.); +#57224 = VERTEX_POINT('',#57225); +#57225 = CARTESIAN_POINT('',(8.725,5.26,0.)); +#57226 = CIRCLE('',#57227,0.275); +#57227 = AXIS2_PLACEMENT_3D('',#57228,#57229,#57230); +#57228 = CARTESIAN_POINT('',(9.,5.26,0.)); +#57229 = DIRECTION('',(0.,0.,-1.)); +#57230 = DIRECTION('',(-1.,-0.,-0.)); +#57231 = ORIENTED_EDGE('',*,*,#57232,.F.); +#57232 = EDGE_CURVE('',#57233,#57224,#57235,.T.); +#57233 = VERTEX_POINT('',#57234); +#57234 = CARTESIAN_POINT('',(9.,4.985,0.)); +#57235 = CIRCLE('',#57236,0.275); +#57236 = AXIS2_PLACEMENT_3D('',#57237,#57238,#57239); +#57237 = CARTESIAN_POINT('',(9.,5.26,0.)); +#57238 = DIRECTION('',(0.,0.,-1.)); +#57239 = DIRECTION('',(-1.,-0.,-0.)); +#57240 = ORIENTED_EDGE('',*,*,#57241,.T.); +#57241 = EDGE_CURVE('',#57233,#57242,#57244,.T.); +#57242 = VERTEX_POINT('',#57243); +#57243 = CARTESIAN_POINT('',(9.,4.81,0.)); +#57244 = LINE('',#57245,#57246); +#57245 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57246 = VECTOR('',#57247,1.); +#57247 = DIRECTION('',(-0.,-1.,-0.)); +#57248 = ORIENTED_EDGE('',*,*,#57249,.F.); +#57249 = EDGE_CURVE('',#57250,#57242,#57252,.T.); +#57250 = VERTEX_POINT('',#57251); +#57251 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57252 = LINE('',#57253,#57254); +#57253 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57254 = VECTOR('',#57255,1.); +#57255 = DIRECTION('',(1.,0.,0.)); +#57256 = ORIENTED_EDGE('',*,*,#57257,.F.); +#57257 = EDGE_CURVE('',#57138,#57250,#57258,.T.); +#57258 = LINE('',#57259,#57260); +#57259 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57260 = VECTOR('',#57261,1.); +#57261 = DIRECTION('',(-0.,-1.,-0.)); +#57262 = PLANE('',#57263); +#57263 = AXIS2_PLACEMENT_3D('',#57264,#57265,#57266); +#57264 = CARTESIAN_POINT('',(8.775,5.26,0.)); +#57265 = DIRECTION('',(0.,0.,1.)); +#57266 = DIRECTION('',(1.,0.,-0.)); +#57267 = ADVANCED_FACE('',(#57268),#57293,.T.); +#57268 = FACE_BOUND('',#57269,.F.); +#57269 = EDGE_LOOP('',(#57270,#57278,#57286,#57292)); +#57270 = ORIENTED_EDGE('',*,*,#57271,.T.); +#57271 = EDGE_CURVE('',#57122,#57272,#57274,.T.); +#57272 = VERTEX_POINT('',#57273); +#57273 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#57274 = LINE('',#57275,#57276); +#57275 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57276 = VECTOR('',#57277,1.); +#57277 = DIRECTION('',(0.,0.,1.)); +#57278 = ORIENTED_EDGE('',*,*,#57279,.T.); +#57279 = EDGE_CURVE('',#57272,#57280,#57282,.T.); +#57280 = VERTEX_POINT('',#57281); +#57281 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#57282 = LINE('',#57283,#57284); +#57283 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#57284 = VECTOR('',#57285,1.); +#57285 = DIRECTION('',(-1.,-0.,-0.)); +#57286 = ORIENTED_EDGE('',*,*,#57287,.F.); +#57287 = EDGE_CURVE('',#57130,#57280,#57288,.T.); +#57288 = LINE('',#57289,#57290); +#57289 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57290 = VECTOR('',#57291,1.); +#57291 = DIRECTION('',(0.,0.,1.)); +#57292 = ORIENTED_EDGE('',*,*,#57129,.F.); +#57293 = PLANE('',#57294); +#57294 = AXIS2_PLACEMENT_3D('',#57295,#57296,#57297); +#57295 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57296 = DIRECTION('',(0.,1.,0.)); +#57297 = DIRECTION('',(1.,0.,0.)); +#57298 = ADVANCED_FACE('',(#57299),#57326,.F.); +#57299 = FACE_BOUND('',#57300,.F.); +#57300 = EDGE_LOOP('',(#57301,#57309,#57310,#57311,#57319)); +#57301 = ORIENTED_EDGE('',*,*,#57302,.F.); +#57302 = EDGE_CURVE('',#57169,#57303,#57305,.T.); +#57303 = VERTEX_POINT('',#57304); +#57304 = CARTESIAN_POINT('',(9.,5.535,0.8)); +#57305 = LINE('',#57306,#57307); +#57306 = CARTESIAN_POINT('',(9.,5.535,0.8)); +#57307 = VECTOR('',#57308,1.); +#57308 = DIRECTION('',(0.,0.,1.)); +#57309 = ORIENTED_EDGE('',*,*,#57176,.F.); +#57310 = ORIENTED_EDGE('',*,*,#57223,.F.); +#57311 = ORIENTED_EDGE('',*,*,#57312,.F.); +#57312 = EDGE_CURVE('',#57313,#57224,#57315,.T.); +#57313 = VERTEX_POINT('',#57314); +#57314 = CARTESIAN_POINT('',(8.725,5.26,0.8)); +#57315 = LINE('',#57316,#57317); +#57316 = CARTESIAN_POINT('',(8.725,5.26,0.8)); +#57317 = VECTOR('',#57318,1.); +#57318 = DIRECTION('',(0.,0.,-1.)); +#57319 = ORIENTED_EDGE('',*,*,#57320,.T.); +#57320 = EDGE_CURVE('',#57313,#57303,#57321,.T.); +#57321 = CIRCLE('',#57322,0.275); +#57322 = AXIS2_PLACEMENT_3D('',#57323,#57324,#57325); +#57323 = CARTESIAN_POINT('',(9.,5.26,0.8)); +#57324 = DIRECTION('',(0.,0.,-1.)); +#57325 = DIRECTION('',(-1.,-0.,-0.)); +#57326 = CYLINDRICAL_SURFACE('',#57327,0.275); +#57327 = AXIS2_PLACEMENT_3D('',#57328,#57329,#57330); +#57328 = CARTESIAN_POINT('',(9.,5.26,0.8)); +#57329 = DIRECTION('',(0.,0.,1.)); +#57330 = DIRECTION('',(-1.,0.,0.)); +#57331 = ADVANCED_FACE('',(#57332),#57343,.F.); +#57332 = FACE_BOUND('',#57333,.T.); +#57333 = EDGE_LOOP('',(#57334,#57335,#57336,#57342)); +#57334 = ORIENTED_EDGE('',*,*,#57168,.F.); +#57335 = ORIENTED_EDGE('',*,*,#57271,.T.); +#57336 = ORIENTED_EDGE('',*,*,#57337,.T.); +#57337 = EDGE_CURVE('',#57272,#57303,#57338,.T.); +#57338 = LINE('',#57339,#57340); +#57339 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#57340 = VECTOR('',#57341,1.); +#57341 = DIRECTION('',(-0.,-1.,-0.)); +#57342 = ORIENTED_EDGE('',*,*,#57302,.F.); +#57343 = PLANE('',#57344); +#57344 = AXIS2_PLACEMENT_3D('',#57345,#57346,#57347); +#57345 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57346 = DIRECTION('',(-1.,-0.,-0.)); +#57347 = DIRECTION('',(0.,1.,0.)); +#57348 = ADVANCED_FACE('',(#57349),#57367,.T.); +#57349 = FACE_BOUND('',#57350,.F.); +#57350 = EDGE_LOOP('',(#57351,#57352,#57360,#57366)); +#57351 = ORIENTED_EDGE('',*,*,#57190,.T.); +#57352 = ORIENTED_EDGE('',*,*,#57353,.T.); +#57353 = EDGE_CURVE('',#57191,#57354,#57356,.T.); +#57354 = VERTEX_POINT('',#57355); +#57355 = CARTESIAN_POINT('',(8.15,4.81,0.)); +#57356 = LINE('',#57357,#57358); +#57357 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#57358 = VECTOR('',#57359,1.); +#57359 = DIRECTION('',(-0.,-1.,-0.)); +#57360 = ORIENTED_EDGE('',*,*,#57361,.F.); +#57361 = EDGE_CURVE('',#57250,#57354,#57362,.T.); +#57362 = LINE('',#57363,#57364); +#57363 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57364 = VECTOR('',#57365,1.); +#57365 = DIRECTION('',(-1.,-0.,-0.)); +#57366 = ORIENTED_EDGE('',*,*,#57257,.F.); +#57367 = PLANE('',#57368); +#57368 = AXIS2_PLACEMENT_3D('',#57369,#57370,#57371); +#57369 = CARTESIAN_POINT('',(8.55,5.71,0.)); +#57370 = DIRECTION('',(-0.,-0.,-1.)); +#57371 = DIRECTION('',(0.,1.,-0.)); +#57372 = ADVANCED_FACE('',(#57373),#57398,.F.); +#57373 = FACE_BOUND('',#57374,.T.); +#57374 = EDGE_LOOP('',(#57375,#57376,#57384,#57392)); +#57375 = ORIENTED_EDGE('',*,*,#57206,.T.); +#57376 = ORIENTED_EDGE('',*,*,#57377,.T.); +#57377 = EDGE_CURVE('',#57199,#57378,#57380,.T.); +#57378 = VERTEX_POINT('',#57379); +#57379 = CARTESIAN_POINT('',(8.15,4.81,0.4)); +#57380 = LINE('',#57381,#57382); +#57381 = CARTESIAN_POINT('',(8.15,5.71,0.4)); +#57382 = VECTOR('',#57383,1.); +#57383 = DIRECTION('',(-0.,-1.,-0.)); +#57384 = ORIENTED_EDGE('',*,*,#57385,.F.); +#57385 = EDGE_CURVE('',#57386,#57378,#57388,.T.); +#57386 = VERTEX_POINT('',#57387); +#57387 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#57388 = LINE('',#57389,#57390); +#57389 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#57390 = VECTOR('',#57391,1.); +#57391 = DIRECTION('',(-1.,-0.,-0.)); +#57392 = ORIENTED_EDGE('',*,*,#57393,.F.); +#57393 = EDGE_CURVE('',#57130,#57386,#57394,.T.); +#57394 = LINE('',#57395,#57396); +#57395 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57396 = VECTOR('',#57397,1.); +#57397 = DIRECTION('',(-0.,-1.,-0.)); +#57398 = PLANE('',#57399); +#57399 = AXIS2_PLACEMENT_3D('',#57400,#57401,#57402); +#57400 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57401 = DIRECTION('',(-0.,-0.,-1.)); +#57402 = DIRECTION('',(0.,1.,-0.)); +#57403 = ADVANCED_FACE('',(#57404),#57415,.T.); +#57404 = FACE_BOUND('',#57405,.F.); +#57405 = EDGE_LOOP('',(#57406,#57407,#57408,#57414)); +#57406 = ORIENTED_EDGE('',*,*,#57198,.T.); +#57407 = ORIENTED_EDGE('',*,*,#57377,.T.); +#57408 = ORIENTED_EDGE('',*,*,#57409,.F.); +#57409 = EDGE_CURVE('',#57354,#57378,#57410,.T.); +#57410 = LINE('',#57411,#57412); +#57411 = CARTESIAN_POINT('',(8.15,4.81,0.)); +#57412 = VECTOR('',#57413,1.); +#57413 = DIRECTION('',(0.,0.,1.)); +#57414 = ORIENTED_EDGE('',*,*,#57353,.F.); +#57415 = PLANE('',#57416); +#57416 = AXIS2_PLACEMENT_3D('',#57417,#57418,#57419); +#57417 = CARTESIAN_POINT('',(8.15,5.71,0.)); +#57418 = DIRECTION('',(-1.,-0.,-0.)); +#57419 = DIRECTION('',(0.,1.,0.)); +#57420 = ADVANCED_FACE('',(#57421),#57444,.T.); +#57421 = FACE_BOUND('',#57422,.F.); +#57422 = EDGE_LOOP('',(#57423,#57429,#57437,#57443)); +#57423 = ORIENTED_EDGE('',*,*,#57424,.T.); +#57424 = EDGE_CURVE('',#57250,#57386,#57425,.T.); +#57425 = LINE('',#57426,#57427); +#57426 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57427 = VECTOR('',#57428,1.); +#57428 = DIRECTION('',(0.,0.,1.)); +#57429 = ORIENTED_EDGE('',*,*,#57430,.T.); +#57430 = EDGE_CURVE('',#57386,#57431,#57433,.T.); +#57431 = VERTEX_POINT('',#57432); +#57432 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#57433 = LINE('',#57434,#57435); +#57434 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#57435 = VECTOR('',#57436,1.); +#57436 = DIRECTION('',(1.,0.,0.)); +#57437 = ORIENTED_EDGE('',*,*,#57438,.F.); +#57438 = EDGE_CURVE('',#57242,#57431,#57439,.T.); +#57439 = LINE('',#57440,#57441); +#57440 = CARTESIAN_POINT('',(9.,4.81,0.)); +#57441 = VECTOR('',#57442,1.); +#57442 = DIRECTION('',(0.,0.,1.)); +#57443 = ORIENTED_EDGE('',*,*,#57249,.F.); +#57444 = PLANE('',#57445); +#57445 = AXIS2_PLACEMENT_3D('',#57446,#57447,#57448); +#57446 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57447 = DIRECTION('',(-0.,-1.,-0.)); +#57448 = DIRECTION('',(-1.,0.,0.)); +#57449 = ADVANCED_FACE('',(#57450),#57468,.F.); +#57450 = FACE_BOUND('',#57451,.T.); +#57451 = EDGE_LOOP('',(#57452,#57453,#57461,#57467)); +#57452 = ORIENTED_EDGE('',*,*,#57241,.F.); +#57453 = ORIENTED_EDGE('',*,*,#57454,.T.); +#57454 = EDGE_CURVE('',#57233,#57455,#57457,.T.); +#57455 = VERTEX_POINT('',#57456); +#57456 = CARTESIAN_POINT('',(9.,4.985,0.4)); +#57457 = LINE('',#57458,#57459); +#57458 = CARTESIAN_POINT('',(9.,4.985,0.8)); +#57459 = VECTOR('',#57460,1.); +#57460 = DIRECTION('',(0.,0.,1.)); +#57461 = ORIENTED_EDGE('',*,*,#57462,.T.); +#57462 = EDGE_CURVE('',#57455,#57431,#57463,.T.); +#57463 = LINE('',#57464,#57465); +#57464 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57465 = VECTOR('',#57466,1.); +#57466 = DIRECTION('',(-0.,-1.,-0.)); +#57467 = ORIENTED_EDGE('',*,*,#57438,.F.); +#57468 = PLANE('',#57469); +#57469 = AXIS2_PLACEMENT_3D('',#57470,#57471,#57472); +#57470 = CARTESIAN_POINT('',(9.,5.71,0.)); +#57471 = DIRECTION('',(-1.,-0.,-0.)); +#57472 = DIRECTION('',(0.,1.,0.)); +#57473 = ADVANCED_FACE('',(#57474),#57494,.F.); +#57474 = FACE_BOUND('',#57475,.F.); +#57475 = EDGE_LOOP('',(#57476,#57477,#57478,#57486,#57493)); +#57476 = ORIENTED_EDGE('',*,*,#57232,.F.); +#57477 = ORIENTED_EDGE('',*,*,#57454,.T.); +#57478 = ORIENTED_EDGE('',*,*,#57479,.T.); +#57479 = EDGE_CURVE('',#57455,#57480,#57482,.T.); +#57480 = VERTEX_POINT('',#57481); +#57481 = CARTESIAN_POINT('',(9.,4.985,0.8)); +#57482 = LINE('',#57483,#57484); +#57483 = CARTESIAN_POINT('',(9.,4.985,0.8)); +#57484 = VECTOR('',#57485,1.); +#57485 = DIRECTION('',(0.,0.,1.)); +#57486 = ORIENTED_EDGE('',*,*,#57487,.T.); +#57487 = EDGE_CURVE('',#57480,#57313,#57488,.T.); +#57488 = CIRCLE('',#57489,0.275); +#57489 = AXIS2_PLACEMENT_3D('',#57490,#57491,#57492); +#57490 = CARTESIAN_POINT('',(9.,5.26,0.8)); +#57491 = DIRECTION('',(0.,0.,-1.)); +#57492 = DIRECTION('',(-1.,-0.,-0.)); +#57493 = ORIENTED_EDGE('',*,*,#57312,.T.); +#57494 = CYLINDRICAL_SURFACE('',#57495,0.275); +#57495 = AXIS2_PLACEMENT_3D('',#57496,#57497,#57498); +#57496 = CARTESIAN_POINT('',(9.,5.26,0.8)); +#57497 = DIRECTION('',(0.,0.,1.)); +#57498 = DIRECTION('',(-1.,0.,0.)); +#57499 = ADVANCED_FACE('',(#57500),#57518,.T.); +#57500 = FACE_BOUND('',#57501,.F.); +#57501 = EDGE_LOOP('',(#57502,#57503,#57511,#57517)); +#57502 = ORIENTED_EDGE('',*,*,#57287,.T.); +#57503 = ORIENTED_EDGE('',*,*,#57504,.T.); +#57504 = EDGE_CURVE('',#57280,#57505,#57507,.T.); +#57505 = VERTEX_POINT('',#57506); +#57506 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#57507 = LINE('',#57508,#57509); +#57508 = CARTESIAN_POINT('',(8.55,5.71,0.8)); +#57509 = VECTOR('',#57510,1.); +#57510 = DIRECTION('',(-0.,-1.,-0.)); +#57511 = ORIENTED_EDGE('',*,*,#57512,.F.); +#57512 = EDGE_CURVE('',#57386,#57505,#57513,.T.); +#57513 = LINE('',#57514,#57515); +#57514 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#57515 = VECTOR('',#57516,1.); +#57516 = DIRECTION('',(0.,0.,1.)); +#57517 = ORIENTED_EDGE('',*,*,#57393,.F.); +#57518 = PLANE('',#57519); +#57519 = AXIS2_PLACEMENT_3D('',#57520,#57521,#57522); +#57520 = CARTESIAN_POINT('',(8.55,5.71,0.4)); +#57521 = DIRECTION('',(-1.,-0.,-0.)); +#57522 = DIRECTION('',(0.,1.,0.)); +#57523 = ADVANCED_FACE('',(#57524),#57545,.T.); +#57524 = FACE_BOUND('',#57525,.F.); +#57525 = EDGE_LOOP('',(#57526,#57527,#57528,#57529,#57530,#57538,#57544) + ); +#57526 = ORIENTED_EDGE('',*,*,#57279,.F.); +#57527 = ORIENTED_EDGE('',*,*,#57337,.T.); +#57528 = ORIENTED_EDGE('',*,*,#57320,.F.); +#57529 = ORIENTED_EDGE('',*,*,#57487,.F.); +#57530 = ORIENTED_EDGE('',*,*,#57531,.T.); +#57531 = EDGE_CURVE('',#57480,#57532,#57534,.T.); +#57532 = VERTEX_POINT('',#57533); +#57533 = CARTESIAN_POINT('',(9.,4.81,0.8)); +#57534 = LINE('',#57535,#57536); +#57535 = CARTESIAN_POINT('',(9.,5.71,0.8)); +#57536 = VECTOR('',#57537,1.); +#57537 = DIRECTION('',(-0.,-1.,-0.)); +#57538 = ORIENTED_EDGE('',*,*,#57539,.F.); +#57539 = EDGE_CURVE('',#57505,#57532,#57540,.T.); +#57540 = LINE('',#57541,#57542); +#57541 = CARTESIAN_POINT('',(8.55,4.81,0.8)); +#57542 = VECTOR('',#57543,1.); +#57543 = DIRECTION('',(1.,0.,0.)); +#57544 = ORIENTED_EDGE('',*,*,#57504,.F.); +#57545 = PLANE('',#57546); +#57546 = AXIS2_PLACEMENT_3D('',#57547,#57548,#57549); +#57547 = CARTESIAN_POINT('',(8.775,5.26,0.8)); +#57548 = DIRECTION('',(0.,0.,1.)); +#57549 = DIRECTION('',(1.,0.,-0.)); +#57550 = ADVANCED_FACE('',(#57551),#57557,.T.); +#57551 = FACE_BOUND('',#57552,.F.); +#57552 = EDGE_LOOP('',(#57553,#57554,#57555,#57556)); +#57553 = ORIENTED_EDGE('',*,*,#57361,.T.); +#57554 = ORIENTED_EDGE('',*,*,#57409,.T.); +#57555 = ORIENTED_EDGE('',*,*,#57385,.F.); +#57556 = ORIENTED_EDGE('',*,*,#57424,.F.); +#57557 = PLANE('',#57558); +#57558 = AXIS2_PLACEMENT_3D('',#57559,#57560,#57561); +#57559 = CARTESIAN_POINT('',(8.55,4.81,0.)); +#57560 = DIRECTION('',(-0.,-1.,-0.)); +#57561 = DIRECTION('',(0.,0.,-1.)); +#57562 = ADVANCED_FACE('',(#57563),#57574,.T.); +#57563 = FACE_BOUND('',#57564,.F.); +#57564 = EDGE_LOOP('',(#57565,#57566,#57567,#57573)); +#57565 = ORIENTED_EDGE('',*,*,#57512,.T.); +#57566 = ORIENTED_EDGE('',*,*,#57539,.T.); +#57567 = ORIENTED_EDGE('',*,*,#57568,.F.); +#57568 = EDGE_CURVE('',#57431,#57532,#57569,.T.); +#57569 = LINE('',#57570,#57571); +#57570 = CARTESIAN_POINT('',(9.,4.81,0.4)); +#57571 = VECTOR('',#57572,1.); +#57572 = DIRECTION('',(0.,0.,1.)); +#57573 = ORIENTED_EDGE('',*,*,#57430,.F.); +#57574 = PLANE('',#57575); +#57575 = AXIS2_PLACEMENT_3D('',#57576,#57577,#57578); +#57576 = CARTESIAN_POINT('',(8.55,4.81,0.4)); +#57577 = DIRECTION('',(-0.,-1.,-0.)); +#57578 = DIRECTION('',(-1.,0.,0.)); +#57579 = ADVANCED_FACE('',(#57580),#57586,.F.); +#57580 = FACE_BOUND('',#57581,.T.); +#57581 = EDGE_LOOP('',(#57582,#57583,#57584,#57585)); +#57582 = ORIENTED_EDGE('',*,*,#57462,.F.); +#57583 = ORIENTED_EDGE('',*,*,#57479,.T.); +#57584 = ORIENTED_EDGE('',*,*,#57531,.T.); +#57585 = ORIENTED_EDGE('',*,*,#57568,.F.); +#57586 = PLANE('',#57587); +#57587 = AXIS2_PLACEMENT_3D('',#57588,#57589,#57590); +#57588 = CARTESIAN_POINT('',(9.,5.71,0.4)); +#57589 = DIRECTION('',(-1.,-0.,-0.)); +#57590 = DIRECTION('',(0.,1.,0.)); +#57591 = MANIFOLD_SOLID_BREP('',#57592); +#57592 = CLOSED_SHELL('',(#57593,#57633,#57664,#57695,#57745,#57776, + #57809,#57826,#57850,#57881,#57898,#57927,#57951,#57977,#58001, + #58028,#58040,#58057)); +#57593 = ADVANCED_FACE('',(#57594),#57628,.T.); +#57594 = FACE_BOUND('',#57595,.T.); +#57595 = EDGE_LOOP('',(#57596,#57606,#57614,#57622)); +#57596 = ORIENTED_EDGE('',*,*,#57597,.T.); +#57597 = EDGE_CURVE('',#57598,#57600,#57602,.T.); +#57598 = VERTEX_POINT('',#57599); +#57599 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57600 = VERTEX_POINT('',#57601); +#57601 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57602 = LINE('',#57603,#57604); +#57603 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57604 = VECTOR('',#57605,1.); +#57605 = DIRECTION('',(0.,0.,1.)); +#57606 = ORIENTED_EDGE('',*,*,#57607,.T.); +#57607 = EDGE_CURVE('',#57600,#57608,#57610,.T.); +#57608 = VERTEX_POINT('',#57609); +#57609 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57610 = LINE('',#57611,#57612); +#57611 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57612 = VECTOR('',#57613,1.); +#57613 = DIRECTION('',(1.,0.,0.)); +#57614 = ORIENTED_EDGE('',*,*,#57615,.F.); +#57615 = EDGE_CURVE('',#57616,#57608,#57618,.T.); +#57616 = VERTEX_POINT('',#57617); +#57617 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57618 = LINE('',#57619,#57620); +#57619 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57620 = VECTOR('',#57621,1.); +#57621 = DIRECTION('',(0.,0.,1.)); +#57622 = ORIENTED_EDGE('',*,*,#57623,.F.); +#57623 = EDGE_CURVE('',#57598,#57616,#57624,.T.); +#57624 = LINE('',#57625,#57626); +#57625 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57626 = VECTOR('',#57627,1.); +#57627 = DIRECTION('',(1.,0.,0.)); +#57628 = PLANE('',#57629); +#57629 = AXIS2_PLACEMENT_3D('',#57630,#57631,#57632); +#57630 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57631 = DIRECTION('',(0.,1.,0.)); +#57632 = DIRECTION('',(1.,0.,0.)); +#57633 = ADVANCED_FACE('',(#57634),#57659,.F.); +#57634 = FACE_BOUND('',#57635,.F.); +#57635 = EDGE_LOOP('',(#57636,#57644,#57645,#57653)); +#57636 = ORIENTED_EDGE('',*,*,#57637,.F.); +#57637 = EDGE_CURVE('',#57598,#57638,#57640,.T.); +#57638 = VERTEX_POINT('',#57639); +#57639 = CARTESIAN_POINT('',(-9.,4.265,0.)); +#57640 = LINE('',#57641,#57642); +#57641 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57642 = VECTOR('',#57643,1.); +#57643 = DIRECTION('',(0.,-1.,0.)); +#57644 = ORIENTED_EDGE('',*,*,#57597,.T.); +#57645 = ORIENTED_EDGE('',*,*,#57646,.T.); +#57646 = EDGE_CURVE('',#57600,#57647,#57649,.T.); +#57647 = VERTEX_POINT('',#57648); +#57648 = CARTESIAN_POINT('',(-9.,4.265,0.4)); +#57649 = LINE('',#57650,#57651); +#57650 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57651 = VECTOR('',#57652,1.); +#57652 = DIRECTION('',(0.,-1.,0.)); +#57653 = ORIENTED_EDGE('',*,*,#57654,.F.); +#57654 = EDGE_CURVE('',#57638,#57647,#57655,.T.); +#57655 = LINE('',#57656,#57657); +#57656 = CARTESIAN_POINT('',(-9.,4.265,0.8)); +#57657 = VECTOR('',#57658,1.); +#57658 = DIRECTION('',(0.,0.,1.)); +#57659 = PLANE('',#57660); +#57660 = AXIS2_PLACEMENT_3D('',#57661,#57662,#57663); +#57661 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57662 = DIRECTION('',(1.,0.,0.)); +#57663 = DIRECTION('',(0.,-1.,0.)); +#57664 = ADVANCED_FACE('',(#57665),#57690,.F.); +#57665 = FACE_BOUND('',#57666,.F.); +#57666 = EDGE_LOOP('',(#57667,#57675,#57683,#57689)); +#57667 = ORIENTED_EDGE('',*,*,#57668,.T.); +#57668 = EDGE_CURVE('',#57616,#57669,#57671,.T.); +#57669 = VERTEX_POINT('',#57670); +#57670 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#57671 = LINE('',#57672,#57673); +#57672 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57673 = VECTOR('',#57674,1.); +#57674 = DIRECTION('',(1.,0.,0.)); +#57675 = ORIENTED_EDGE('',*,*,#57676,.T.); +#57676 = EDGE_CURVE('',#57669,#57677,#57679,.T.); +#57677 = VERTEX_POINT('',#57678); +#57678 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#57679 = LINE('',#57680,#57681); +#57680 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#57681 = VECTOR('',#57682,1.); +#57682 = DIRECTION('',(0.,0.,1.)); +#57683 = ORIENTED_EDGE('',*,*,#57684,.F.); +#57684 = EDGE_CURVE('',#57608,#57677,#57685,.T.); +#57685 = LINE('',#57686,#57687); +#57686 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57687 = VECTOR('',#57688,1.); +#57688 = DIRECTION('',(1.,0.,0.)); +#57689 = ORIENTED_EDGE('',*,*,#57615,.F.); +#57690 = PLANE('',#57691); +#57691 = AXIS2_PLACEMENT_3D('',#57692,#57693,#57694); +#57692 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57693 = DIRECTION('',(0.,-1.,0.)); +#57694 = DIRECTION('',(0.,0.,1.)); +#57695 = ADVANCED_FACE('',(#57696),#57740,.F.); +#57696 = FACE_BOUND('',#57697,.F.); +#57697 = EDGE_LOOP('',(#57698,#57699,#57700,#57709,#57718,#57726,#57734) + ); +#57698 = ORIENTED_EDGE('',*,*,#57623,.F.); +#57699 = ORIENTED_EDGE('',*,*,#57637,.T.); +#57700 = ORIENTED_EDGE('',*,*,#57701,.F.); +#57701 = EDGE_CURVE('',#57702,#57638,#57704,.T.); +#57702 = VERTEX_POINT('',#57703); +#57703 = CARTESIAN_POINT('',(-8.725,3.99,0.)); +#57704 = CIRCLE('',#57705,0.275); +#57705 = AXIS2_PLACEMENT_3D('',#57706,#57707,#57708); +#57706 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#57707 = DIRECTION('',(0.,0.,1.)); +#57708 = DIRECTION('',(1.,0.,-0.)); +#57709 = ORIENTED_EDGE('',*,*,#57710,.F.); +#57710 = EDGE_CURVE('',#57711,#57702,#57713,.T.); +#57711 = VERTEX_POINT('',#57712); +#57712 = CARTESIAN_POINT('',(-9.,3.715,0.)); +#57713 = CIRCLE('',#57714,0.275); +#57714 = AXIS2_PLACEMENT_3D('',#57715,#57716,#57717); +#57715 = CARTESIAN_POINT('',(-9.,3.99,0.)); +#57716 = DIRECTION('',(0.,0.,1.)); +#57717 = DIRECTION('',(1.,0.,-0.)); +#57718 = ORIENTED_EDGE('',*,*,#57719,.T.); +#57719 = EDGE_CURVE('',#57711,#57720,#57722,.T.); +#57720 = VERTEX_POINT('',#57721); +#57721 = CARTESIAN_POINT('',(-9.,3.54,0.)); +#57722 = LINE('',#57723,#57724); +#57723 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57724 = VECTOR('',#57725,1.); +#57725 = DIRECTION('',(0.,-1.,0.)); +#57726 = ORIENTED_EDGE('',*,*,#57727,.F.); +#57727 = EDGE_CURVE('',#57728,#57720,#57730,.T.); +#57728 = VERTEX_POINT('',#57729); +#57729 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#57730 = LINE('',#57731,#57732); +#57731 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#57732 = VECTOR('',#57733,1.); +#57733 = DIRECTION('',(-1.,0.,0.)); +#57734 = ORIENTED_EDGE('',*,*,#57735,.F.); +#57735 = EDGE_CURVE('',#57616,#57728,#57736,.T.); +#57736 = LINE('',#57737,#57738); +#57737 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57738 = VECTOR('',#57739,1.); +#57739 = DIRECTION('',(0.,-1.,0.)); +#57740 = PLANE('',#57741); +#57741 = AXIS2_PLACEMENT_3D('',#57742,#57743,#57744); +#57742 = CARTESIAN_POINT('',(-8.775,3.99,0.)); +#57743 = DIRECTION('',(0.,0.,1.)); +#57744 = DIRECTION('',(1.,0.,-0.)); +#57745 = ADVANCED_FACE('',(#57746),#57771,.T.); +#57746 = FACE_BOUND('',#57747,.T.); +#57747 = EDGE_LOOP('',(#57748,#57756,#57764,#57770)); +#57748 = ORIENTED_EDGE('',*,*,#57749,.T.); +#57749 = EDGE_CURVE('',#57600,#57750,#57752,.T.); +#57750 = VERTEX_POINT('',#57751); +#57751 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#57752 = LINE('',#57753,#57754); +#57753 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57754 = VECTOR('',#57755,1.); +#57755 = DIRECTION('',(0.,0.,1.)); +#57756 = ORIENTED_EDGE('',*,*,#57757,.T.); +#57757 = EDGE_CURVE('',#57750,#57758,#57760,.T.); +#57758 = VERTEX_POINT('',#57759); +#57759 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#57760 = LINE('',#57761,#57762); +#57761 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#57762 = VECTOR('',#57763,1.); +#57763 = DIRECTION('',(1.,0.,0.)); +#57764 = ORIENTED_EDGE('',*,*,#57765,.F.); +#57765 = EDGE_CURVE('',#57608,#57758,#57766,.T.); +#57766 = LINE('',#57767,#57768); +#57767 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57768 = VECTOR('',#57769,1.); +#57769 = DIRECTION('',(0.,0.,1.)); +#57770 = ORIENTED_EDGE('',*,*,#57607,.F.); +#57771 = PLANE('',#57772); +#57772 = AXIS2_PLACEMENT_3D('',#57773,#57774,#57775); +#57773 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57774 = DIRECTION('',(0.,1.,0.)); +#57775 = DIRECTION('',(1.,0.,0.)); +#57776 = ADVANCED_FACE('',(#57777),#57804,.F.); +#57777 = FACE_BOUND('',#57778,.F.); +#57778 = EDGE_LOOP('',(#57779,#57790,#57796,#57797,#57798)); +#57779 = ORIENTED_EDGE('',*,*,#57780,.F.); +#57780 = EDGE_CURVE('',#57781,#57783,#57785,.T.); +#57781 = VERTEX_POINT('',#57782); +#57782 = CARTESIAN_POINT('',(-8.725,3.99,0.8)); +#57783 = VERTEX_POINT('',#57784); +#57784 = CARTESIAN_POINT('',(-9.,4.265,0.8)); +#57785 = CIRCLE('',#57786,0.275); +#57786 = AXIS2_PLACEMENT_3D('',#57787,#57788,#57789); +#57787 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#57788 = DIRECTION('',(0.,0.,1.)); +#57789 = DIRECTION('',(1.,0.,-0.)); +#57790 = ORIENTED_EDGE('',*,*,#57791,.T.); +#57791 = EDGE_CURVE('',#57781,#57702,#57792,.T.); +#57792 = LINE('',#57793,#57794); +#57793 = CARTESIAN_POINT('',(-8.725,3.99,0.8)); +#57794 = VECTOR('',#57795,1.); +#57795 = DIRECTION('',(-0.,-0.,-1.)); +#57796 = ORIENTED_EDGE('',*,*,#57701,.T.); +#57797 = ORIENTED_EDGE('',*,*,#57654,.T.); +#57798 = ORIENTED_EDGE('',*,*,#57799,.T.); +#57799 = EDGE_CURVE('',#57647,#57783,#57800,.T.); +#57800 = LINE('',#57801,#57802); +#57801 = CARTESIAN_POINT('',(-9.,4.265,0.8)); +#57802 = VECTOR('',#57803,1.); +#57803 = DIRECTION('',(0.,0.,1.)); +#57804 = CYLINDRICAL_SURFACE('',#57805,0.275); +#57805 = AXIS2_PLACEMENT_3D('',#57806,#57807,#57808); +#57806 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#57807 = DIRECTION('',(0.,0.,1.)); +#57808 = DIRECTION('',(1.,0.,-0.)); +#57809 = ADVANCED_FACE('',(#57810),#57821,.F.); +#57810 = FACE_BOUND('',#57811,.F.); +#57811 = EDGE_LOOP('',(#57812,#57813,#57814,#57820)); +#57812 = ORIENTED_EDGE('',*,*,#57646,.F.); +#57813 = ORIENTED_EDGE('',*,*,#57749,.T.); +#57814 = ORIENTED_EDGE('',*,*,#57815,.T.); +#57815 = EDGE_CURVE('',#57750,#57783,#57816,.T.); +#57816 = LINE('',#57817,#57818); +#57817 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#57818 = VECTOR('',#57819,1.); +#57819 = DIRECTION('',(0.,-1.,0.)); +#57820 = ORIENTED_EDGE('',*,*,#57799,.F.); +#57821 = PLANE('',#57822); +#57822 = AXIS2_PLACEMENT_3D('',#57823,#57824,#57825); +#57823 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57824 = DIRECTION('',(1.,0.,0.)); +#57825 = DIRECTION('',(0.,-1.,0.)); +#57826 = ADVANCED_FACE('',(#57827),#57845,.T.); +#57827 = FACE_BOUND('',#57828,.T.); +#57828 = EDGE_LOOP('',(#57829,#57830,#57838,#57844)); +#57829 = ORIENTED_EDGE('',*,*,#57668,.T.); +#57830 = ORIENTED_EDGE('',*,*,#57831,.T.); +#57831 = EDGE_CURVE('',#57669,#57832,#57834,.T.); +#57832 = VERTEX_POINT('',#57833); +#57833 = CARTESIAN_POINT('',(-8.15,3.54,0.)); +#57834 = LINE('',#57835,#57836); +#57835 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#57836 = VECTOR('',#57837,1.); +#57837 = DIRECTION('',(0.,-1.,0.)); +#57838 = ORIENTED_EDGE('',*,*,#57839,.F.); +#57839 = EDGE_CURVE('',#57728,#57832,#57840,.T.); +#57840 = LINE('',#57841,#57842); +#57841 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#57842 = VECTOR('',#57843,1.); +#57843 = DIRECTION('',(1.,0.,0.)); +#57844 = ORIENTED_EDGE('',*,*,#57735,.F.); +#57845 = PLANE('',#57846); +#57846 = AXIS2_PLACEMENT_3D('',#57847,#57848,#57849); +#57847 = CARTESIAN_POINT('',(-8.55,4.44,0.)); +#57848 = DIRECTION('',(0.,0.,-1.)); +#57849 = DIRECTION('',(0.,-1.,0.)); +#57850 = ADVANCED_FACE('',(#57851),#57876,.F.); +#57851 = FACE_BOUND('',#57852,.F.); +#57852 = EDGE_LOOP('',(#57853,#57854,#57862,#57870)); +#57853 = ORIENTED_EDGE('',*,*,#57684,.T.); +#57854 = ORIENTED_EDGE('',*,*,#57855,.T.); +#57855 = EDGE_CURVE('',#57677,#57856,#57858,.T.); +#57856 = VERTEX_POINT('',#57857); +#57857 = CARTESIAN_POINT('',(-8.15,3.54,0.4)); +#57858 = LINE('',#57859,#57860); +#57859 = CARTESIAN_POINT('',(-8.15,4.44,0.4)); +#57860 = VECTOR('',#57861,1.); +#57861 = DIRECTION('',(0.,-1.,0.)); +#57862 = ORIENTED_EDGE('',*,*,#57863,.F.); +#57863 = EDGE_CURVE('',#57864,#57856,#57866,.T.); +#57864 = VERTEX_POINT('',#57865); +#57865 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#57866 = LINE('',#57867,#57868); +#57867 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#57868 = VECTOR('',#57869,1.); +#57869 = DIRECTION('',(1.,0.,0.)); +#57870 = ORIENTED_EDGE('',*,*,#57871,.F.); +#57871 = EDGE_CURVE('',#57608,#57864,#57872,.T.); +#57872 = LINE('',#57873,#57874); +#57873 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57874 = VECTOR('',#57875,1.); +#57875 = DIRECTION('',(0.,-1.,0.)); +#57876 = PLANE('',#57877); +#57877 = AXIS2_PLACEMENT_3D('',#57878,#57879,#57880); +#57878 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57879 = DIRECTION('',(0.,0.,-1.)); +#57880 = DIRECTION('',(0.,-1.,0.)); +#57881 = ADVANCED_FACE('',(#57882),#57893,.T.); +#57882 = FACE_BOUND('',#57883,.T.); +#57883 = EDGE_LOOP('',(#57884,#57885,#57886,#57892)); +#57884 = ORIENTED_EDGE('',*,*,#57676,.T.); +#57885 = ORIENTED_EDGE('',*,*,#57855,.T.); +#57886 = ORIENTED_EDGE('',*,*,#57887,.F.); +#57887 = EDGE_CURVE('',#57832,#57856,#57888,.T.); +#57888 = LINE('',#57889,#57890); +#57889 = CARTESIAN_POINT('',(-8.15,3.54,0.)); +#57890 = VECTOR('',#57891,1.); +#57891 = DIRECTION('',(0.,0.,1.)); +#57892 = ORIENTED_EDGE('',*,*,#57831,.F.); +#57893 = PLANE('',#57894); +#57894 = AXIS2_PLACEMENT_3D('',#57895,#57896,#57897); +#57895 = CARTESIAN_POINT('',(-8.15,4.44,0.)); +#57896 = DIRECTION('',(1.,0.,0.)); +#57897 = DIRECTION('',(0.,-1.,0.)); +#57898 = ADVANCED_FACE('',(#57899),#57922,.T.); +#57899 = FACE_BOUND('',#57900,.T.); +#57900 = EDGE_LOOP('',(#57901,#57907,#57915,#57921)); +#57901 = ORIENTED_EDGE('',*,*,#57902,.T.); +#57902 = EDGE_CURVE('',#57728,#57864,#57903,.T.); +#57903 = LINE('',#57904,#57905); +#57904 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#57905 = VECTOR('',#57906,1.); +#57906 = DIRECTION('',(0.,0.,1.)); +#57907 = ORIENTED_EDGE('',*,*,#57908,.T.); +#57908 = EDGE_CURVE('',#57864,#57909,#57911,.T.); +#57909 = VERTEX_POINT('',#57910); +#57910 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#57911 = LINE('',#57912,#57913); +#57912 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#57913 = VECTOR('',#57914,1.); +#57914 = DIRECTION('',(-1.,0.,0.)); +#57915 = ORIENTED_EDGE('',*,*,#57916,.F.); +#57916 = EDGE_CURVE('',#57720,#57909,#57917,.T.); +#57917 = LINE('',#57918,#57919); +#57918 = CARTESIAN_POINT('',(-9.,3.54,0.)); +#57919 = VECTOR('',#57920,1.); +#57920 = DIRECTION('',(0.,0.,1.)); +#57921 = ORIENTED_EDGE('',*,*,#57727,.F.); +#57922 = PLANE('',#57923); +#57923 = AXIS2_PLACEMENT_3D('',#57924,#57925,#57926); +#57924 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#57925 = DIRECTION('',(0.,-1.,0.)); +#57926 = DIRECTION('',(-1.,0.,0.)); +#57927 = ADVANCED_FACE('',(#57928),#57946,.F.); +#57928 = FACE_BOUND('',#57929,.F.); +#57929 = EDGE_LOOP('',(#57930,#57931,#57939,#57945)); +#57930 = ORIENTED_EDGE('',*,*,#57719,.F.); +#57931 = ORIENTED_EDGE('',*,*,#57932,.T.); +#57932 = EDGE_CURVE('',#57711,#57933,#57935,.T.); +#57933 = VERTEX_POINT('',#57934); +#57934 = CARTESIAN_POINT('',(-9.,3.715,0.4)); +#57935 = LINE('',#57936,#57937); +#57936 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#57937 = VECTOR('',#57938,1.); +#57938 = DIRECTION('',(0.,0.,1.)); +#57939 = ORIENTED_EDGE('',*,*,#57940,.T.); +#57940 = EDGE_CURVE('',#57933,#57909,#57941,.T.); +#57941 = LINE('',#57942,#57943); +#57942 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#57943 = VECTOR('',#57944,1.); +#57944 = DIRECTION('',(0.,-1.,0.)); +#57945 = ORIENTED_EDGE('',*,*,#57916,.F.); +#57946 = PLANE('',#57947); +#57947 = AXIS2_PLACEMENT_3D('',#57948,#57949,#57950); +#57948 = CARTESIAN_POINT('',(-9.,4.44,0.)); +#57949 = DIRECTION('',(1.,0.,0.)); +#57950 = DIRECTION('',(0.,-1.,0.)); +#57951 = ADVANCED_FACE('',(#57952),#57972,.F.); +#57952 = FACE_BOUND('',#57953,.F.); +#57953 = EDGE_LOOP('',(#57954,#57955,#57964,#57970,#57971)); +#57954 = ORIENTED_EDGE('',*,*,#57791,.F.); +#57955 = ORIENTED_EDGE('',*,*,#57956,.F.); +#57956 = EDGE_CURVE('',#57957,#57781,#57959,.T.); +#57957 = VERTEX_POINT('',#57958); +#57958 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#57959 = CIRCLE('',#57960,0.275); +#57960 = AXIS2_PLACEMENT_3D('',#57961,#57962,#57963); +#57961 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#57962 = DIRECTION('',(0.,0.,1.)); +#57963 = DIRECTION('',(1.,0.,-0.)); +#57964 = ORIENTED_EDGE('',*,*,#57965,.F.); +#57965 = EDGE_CURVE('',#57933,#57957,#57966,.T.); +#57966 = LINE('',#57967,#57968); +#57967 = CARTESIAN_POINT('',(-9.,3.715,0.8)); +#57968 = VECTOR('',#57969,1.); +#57969 = DIRECTION('',(0.,0.,1.)); +#57970 = ORIENTED_EDGE('',*,*,#57932,.F.); +#57971 = ORIENTED_EDGE('',*,*,#57710,.T.); +#57972 = CYLINDRICAL_SURFACE('',#57973,0.275); +#57973 = AXIS2_PLACEMENT_3D('',#57974,#57975,#57976); +#57974 = CARTESIAN_POINT('',(-9.,3.99,0.8)); +#57975 = DIRECTION('',(0.,0.,1.)); +#57976 = DIRECTION('',(1.,0.,-0.)); +#57977 = ADVANCED_FACE('',(#57978),#57996,.T.); +#57978 = FACE_BOUND('',#57979,.T.); +#57979 = EDGE_LOOP('',(#57980,#57981,#57989,#57995)); +#57980 = ORIENTED_EDGE('',*,*,#57765,.T.); +#57981 = ORIENTED_EDGE('',*,*,#57982,.T.); +#57982 = EDGE_CURVE('',#57758,#57983,#57985,.T.); +#57983 = VERTEX_POINT('',#57984); +#57984 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#57985 = LINE('',#57986,#57987); +#57986 = CARTESIAN_POINT('',(-8.55,4.44,0.8)); +#57987 = VECTOR('',#57988,1.); +#57988 = DIRECTION('',(0.,-1.,0.)); +#57989 = ORIENTED_EDGE('',*,*,#57990,.F.); +#57990 = EDGE_CURVE('',#57864,#57983,#57991,.T.); +#57991 = LINE('',#57992,#57993); +#57992 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#57993 = VECTOR('',#57994,1.); +#57994 = DIRECTION('',(0.,0.,1.)); +#57995 = ORIENTED_EDGE('',*,*,#57871,.F.); +#57996 = PLANE('',#57997); +#57997 = AXIS2_PLACEMENT_3D('',#57998,#57999,#58000); +#57998 = CARTESIAN_POINT('',(-8.55,4.44,0.4)); +#57999 = DIRECTION('',(1.,0.,0.)); +#58000 = DIRECTION('',(0.,-1.,0.)); +#58001 = ADVANCED_FACE('',(#58002),#58023,.T.); +#58002 = FACE_BOUND('',#58003,.T.); +#58003 = EDGE_LOOP('',(#58004,#58005,#58006,#58007,#58008,#58016,#58022) + ); +#58004 = ORIENTED_EDGE('',*,*,#57757,.F.); +#58005 = ORIENTED_EDGE('',*,*,#57815,.T.); +#58006 = ORIENTED_EDGE('',*,*,#57780,.F.); +#58007 = ORIENTED_EDGE('',*,*,#57956,.F.); +#58008 = ORIENTED_EDGE('',*,*,#58009,.T.); +#58009 = EDGE_CURVE('',#57957,#58010,#58012,.T.); +#58010 = VERTEX_POINT('',#58011); +#58011 = CARTESIAN_POINT('',(-9.,3.54,0.8)); +#58012 = LINE('',#58013,#58014); +#58013 = CARTESIAN_POINT('',(-9.,4.44,0.8)); +#58014 = VECTOR('',#58015,1.); +#58015 = DIRECTION('',(0.,-1.,0.)); +#58016 = ORIENTED_EDGE('',*,*,#58017,.F.); +#58017 = EDGE_CURVE('',#57983,#58010,#58018,.T.); +#58018 = LINE('',#58019,#58020); +#58019 = CARTESIAN_POINT('',(-8.55,3.54,0.8)); +#58020 = VECTOR('',#58021,1.); +#58021 = DIRECTION('',(-1.,0.,0.)); +#58022 = ORIENTED_EDGE('',*,*,#57982,.F.); +#58023 = PLANE('',#58024); +#58024 = AXIS2_PLACEMENT_3D('',#58025,#58026,#58027); +#58025 = CARTESIAN_POINT('',(-8.775,3.99,0.8)); +#58026 = DIRECTION('',(0.,0.,1.)); +#58027 = DIRECTION('',(1.,0.,-0.)); +#58028 = ADVANCED_FACE('',(#58029),#58035,.T.); +#58029 = FACE_BOUND('',#58030,.T.); +#58030 = EDGE_LOOP('',(#58031,#58032,#58033,#58034)); +#58031 = ORIENTED_EDGE('',*,*,#57839,.T.); +#58032 = ORIENTED_EDGE('',*,*,#57887,.T.); +#58033 = ORIENTED_EDGE('',*,*,#57863,.F.); +#58034 = ORIENTED_EDGE('',*,*,#57902,.F.); +#58035 = PLANE('',#58036); +#58036 = AXIS2_PLACEMENT_3D('',#58037,#58038,#58039); +#58037 = CARTESIAN_POINT('',(-8.55,3.54,0.)); +#58038 = DIRECTION('',(0.,-1.,0.)); +#58039 = DIRECTION('',(0.,0.,1.)); +#58040 = ADVANCED_FACE('',(#58041),#58052,.T.); +#58041 = FACE_BOUND('',#58042,.T.); +#58042 = EDGE_LOOP('',(#58043,#58044,#58045,#58051)); +#58043 = ORIENTED_EDGE('',*,*,#57990,.T.); +#58044 = ORIENTED_EDGE('',*,*,#58017,.T.); +#58045 = ORIENTED_EDGE('',*,*,#58046,.F.); +#58046 = EDGE_CURVE('',#57909,#58010,#58047,.T.); +#58047 = LINE('',#58048,#58049); +#58048 = CARTESIAN_POINT('',(-9.,3.54,0.4)); +#58049 = VECTOR('',#58050,1.); +#58050 = DIRECTION('',(0.,0.,1.)); +#58051 = ORIENTED_EDGE('',*,*,#57908,.F.); +#58052 = PLANE('',#58053); +#58053 = AXIS2_PLACEMENT_3D('',#58054,#58055,#58056); +#58054 = CARTESIAN_POINT('',(-8.55,3.54,0.4)); +#58055 = DIRECTION('',(0.,-1.,0.)); +#58056 = DIRECTION('',(-1.,0.,0.)); +#58057 = ADVANCED_FACE('',(#58058),#58064,.F.); +#58058 = FACE_BOUND('',#58059,.F.); +#58059 = EDGE_LOOP('',(#58060,#58061,#58062,#58063)); +#58060 = ORIENTED_EDGE('',*,*,#57940,.F.); +#58061 = ORIENTED_EDGE('',*,*,#57965,.T.); +#58062 = ORIENTED_EDGE('',*,*,#58009,.T.); +#58063 = ORIENTED_EDGE('',*,*,#58046,.F.); +#58064 = PLANE('',#58065); +#58065 = AXIS2_PLACEMENT_3D('',#58066,#58067,#58068); +#58066 = CARTESIAN_POINT('',(-9.,4.44,0.4)); +#58067 = DIRECTION('',(1.,0.,0.)); +#58068 = DIRECTION('',(0.,-1.,0.)); +#58069 = MANIFOLD_SOLID_BREP('',#58070); +#58070 = CLOSED_SHELL('',(#58071,#58111,#58142,#58173,#58223,#58254, + #58287,#58304,#58328,#58359,#58376,#58405,#58429,#58455,#58479, + #58506,#58518,#58535)); +#58071 = ADVANCED_FACE('',(#58072),#58106,.T.); +#58072 = FACE_BOUND('',#58073,.T.); +#58073 = EDGE_LOOP('',(#58074,#58084,#58092,#58100)); +#58074 = ORIENTED_EDGE('',*,*,#58075,.T.); +#58075 = EDGE_CURVE('',#58076,#58078,#58080,.T.); +#58076 = VERTEX_POINT('',#58077); +#58077 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58078 = VERTEX_POINT('',#58079); +#58079 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58080 = LINE('',#58081,#58082); +#58081 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58082 = VECTOR('',#58083,1.); +#58083 = DIRECTION('',(0.,0.,1.)); +#58084 = ORIENTED_EDGE('',*,*,#58085,.T.); +#58085 = EDGE_CURVE('',#58078,#58086,#58088,.T.); +#58086 = VERTEX_POINT('',#58087); +#58087 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58088 = LINE('',#58089,#58090); +#58089 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58090 = VECTOR('',#58091,1.); +#58091 = DIRECTION('',(1.,0.,0.)); +#58092 = ORIENTED_EDGE('',*,*,#58093,.F.); +#58093 = EDGE_CURVE('',#58094,#58086,#58096,.T.); +#58094 = VERTEX_POINT('',#58095); +#58095 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58096 = LINE('',#58097,#58098); +#58097 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58098 = VECTOR('',#58099,1.); +#58099 = DIRECTION('',(0.,0.,1.)); +#58100 = ORIENTED_EDGE('',*,*,#58101,.F.); +#58101 = EDGE_CURVE('',#58076,#58094,#58102,.T.); +#58102 = LINE('',#58103,#58104); +#58103 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58104 = VECTOR('',#58105,1.); +#58105 = DIRECTION('',(1.,0.,0.)); +#58106 = PLANE('',#58107); +#58107 = AXIS2_PLACEMENT_3D('',#58108,#58109,#58110); +#58108 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58109 = DIRECTION('',(0.,1.,0.)); +#58110 = DIRECTION('',(1.,0.,0.)); +#58111 = ADVANCED_FACE('',(#58112),#58137,.F.); +#58112 = FACE_BOUND('',#58113,.F.); +#58113 = EDGE_LOOP('',(#58114,#58122,#58123,#58131)); +#58114 = ORIENTED_EDGE('',*,*,#58115,.F.); +#58115 = EDGE_CURVE('',#58076,#58116,#58118,.T.); +#58116 = VERTEX_POINT('',#58117); +#58117 = CARTESIAN_POINT('',(-9.,2.995,0.)); +#58118 = LINE('',#58119,#58120); +#58119 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58120 = VECTOR('',#58121,1.); +#58121 = DIRECTION('',(0.,-1.,0.)); +#58122 = ORIENTED_EDGE('',*,*,#58075,.T.); +#58123 = ORIENTED_EDGE('',*,*,#58124,.T.); +#58124 = EDGE_CURVE('',#58078,#58125,#58127,.T.); +#58125 = VERTEX_POINT('',#58126); +#58126 = CARTESIAN_POINT('',(-9.,2.995,0.4)); +#58127 = LINE('',#58128,#58129); +#58128 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58129 = VECTOR('',#58130,1.); +#58130 = DIRECTION('',(0.,-1.,0.)); +#58131 = ORIENTED_EDGE('',*,*,#58132,.F.); +#58132 = EDGE_CURVE('',#58116,#58125,#58133,.T.); +#58133 = LINE('',#58134,#58135); +#58134 = CARTESIAN_POINT('',(-9.,2.995,0.8)); +#58135 = VECTOR('',#58136,1.); +#58136 = DIRECTION('',(0.,0.,1.)); +#58137 = PLANE('',#58138); +#58138 = AXIS2_PLACEMENT_3D('',#58139,#58140,#58141); +#58139 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58140 = DIRECTION('',(1.,0.,0.)); +#58141 = DIRECTION('',(0.,-1.,0.)); +#58142 = ADVANCED_FACE('',(#58143),#58168,.F.); +#58143 = FACE_BOUND('',#58144,.F.); +#58144 = EDGE_LOOP('',(#58145,#58153,#58161,#58167)); +#58145 = ORIENTED_EDGE('',*,*,#58146,.T.); +#58146 = EDGE_CURVE('',#58094,#58147,#58149,.T.); +#58147 = VERTEX_POINT('',#58148); +#58148 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#58149 = LINE('',#58150,#58151); +#58150 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58151 = VECTOR('',#58152,1.); +#58152 = DIRECTION('',(1.,0.,0.)); +#58153 = ORIENTED_EDGE('',*,*,#58154,.T.); +#58154 = EDGE_CURVE('',#58147,#58155,#58157,.T.); +#58155 = VERTEX_POINT('',#58156); +#58156 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#58157 = LINE('',#58158,#58159); +#58158 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#58159 = VECTOR('',#58160,1.); +#58160 = DIRECTION('',(0.,0.,1.)); +#58161 = ORIENTED_EDGE('',*,*,#58162,.F.); +#58162 = EDGE_CURVE('',#58086,#58155,#58163,.T.); +#58163 = LINE('',#58164,#58165); +#58164 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58165 = VECTOR('',#58166,1.); +#58166 = DIRECTION('',(1.,0.,0.)); +#58167 = ORIENTED_EDGE('',*,*,#58093,.F.); +#58168 = PLANE('',#58169); +#58169 = AXIS2_PLACEMENT_3D('',#58170,#58171,#58172); +#58170 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58171 = DIRECTION('',(0.,-1.,0.)); +#58172 = DIRECTION('',(0.,0.,1.)); +#58173 = ADVANCED_FACE('',(#58174),#58218,.F.); +#58174 = FACE_BOUND('',#58175,.F.); +#58175 = EDGE_LOOP('',(#58176,#58177,#58178,#58187,#58196,#58204,#58212) + ); +#58176 = ORIENTED_EDGE('',*,*,#58101,.F.); +#58177 = ORIENTED_EDGE('',*,*,#58115,.T.); +#58178 = ORIENTED_EDGE('',*,*,#58179,.F.); +#58179 = EDGE_CURVE('',#58180,#58116,#58182,.T.); +#58180 = VERTEX_POINT('',#58181); +#58181 = CARTESIAN_POINT('',(-8.725,2.72,0.)); +#58182 = CIRCLE('',#58183,0.275); +#58183 = AXIS2_PLACEMENT_3D('',#58184,#58185,#58186); +#58184 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#58185 = DIRECTION('',(0.,0.,1.)); +#58186 = DIRECTION('',(1.,0.,-0.)); +#58187 = ORIENTED_EDGE('',*,*,#58188,.F.); +#58188 = EDGE_CURVE('',#58189,#58180,#58191,.T.); +#58189 = VERTEX_POINT('',#58190); +#58190 = CARTESIAN_POINT('',(-9.,2.445,0.)); +#58191 = CIRCLE('',#58192,0.275); +#58192 = AXIS2_PLACEMENT_3D('',#58193,#58194,#58195); +#58193 = CARTESIAN_POINT('',(-9.,2.72,0.)); +#58194 = DIRECTION('',(0.,0.,1.)); +#58195 = DIRECTION('',(1.,0.,-0.)); +#58196 = ORIENTED_EDGE('',*,*,#58197,.T.); +#58197 = EDGE_CURVE('',#58189,#58198,#58200,.T.); +#58198 = VERTEX_POINT('',#58199); +#58199 = CARTESIAN_POINT('',(-9.,2.27,0.)); +#58200 = LINE('',#58201,#58202); +#58201 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58202 = VECTOR('',#58203,1.); +#58203 = DIRECTION('',(0.,-1.,0.)); +#58204 = ORIENTED_EDGE('',*,*,#58205,.F.); +#58205 = EDGE_CURVE('',#58206,#58198,#58208,.T.); +#58206 = VERTEX_POINT('',#58207); +#58207 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58208 = LINE('',#58209,#58210); +#58209 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58210 = VECTOR('',#58211,1.); +#58211 = DIRECTION('',(-1.,0.,0.)); +#58212 = ORIENTED_EDGE('',*,*,#58213,.F.); +#58213 = EDGE_CURVE('',#58094,#58206,#58214,.T.); +#58214 = LINE('',#58215,#58216); +#58215 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58216 = VECTOR('',#58217,1.); +#58217 = DIRECTION('',(0.,-1.,0.)); +#58218 = PLANE('',#58219); +#58219 = AXIS2_PLACEMENT_3D('',#58220,#58221,#58222); +#58220 = CARTESIAN_POINT('',(-8.775,2.72,0.)); +#58221 = DIRECTION('',(0.,0.,1.)); +#58222 = DIRECTION('',(1.,0.,-0.)); +#58223 = ADVANCED_FACE('',(#58224),#58249,.T.); +#58224 = FACE_BOUND('',#58225,.T.); +#58225 = EDGE_LOOP('',(#58226,#58234,#58242,#58248)); +#58226 = ORIENTED_EDGE('',*,*,#58227,.T.); +#58227 = EDGE_CURVE('',#58078,#58228,#58230,.T.); +#58228 = VERTEX_POINT('',#58229); +#58229 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#58230 = LINE('',#58231,#58232); +#58231 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58232 = VECTOR('',#58233,1.); +#58233 = DIRECTION('',(0.,0.,1.)); +#58234 = ORIENTED_EDGE('',*,*,#58235,.T.); +#58235 = EDGE_CURVE('',#58228,#58236,#58238,.T.); +#58236 = VERTEX_POINT('',#58237); +#58237 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#58238 = LINE('',#58239,#58240); +#58239 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#58240 = VECTOR('',#58241,1.); +#58241 = DIRECTION('',(1.,0.,0.)); +#58242 = ORIENTED_EDGE('',*,*,#58243,.F.); +#58243 = EDGE_CURVE('',#58086,#58236,#58244,.T.); +#58244 = LINE('',#58245,#58246); +#58245 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58246 = VECTOR('',#58247,1.); +#58247 = DIRECTION('',(0.,0.,1.)); +#58248 = ORIENTED_EDGE('',*,*,#58085,.F.); +#58249 = PLANE('',#58250); +#58250 = AXIS2_PLACEMENT_3D('',#58251,#58252,#58253); +#58251 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58252 = DIRECTION('',(0.,1.,0.)); +#58253 = DIRECTION('',(1.,0.,0.)); +#58254 = ADVANCED_FACE('',(#58255),#58282,.F.); +#58255 = FACE_BOUND('',#58256,.F.); +#58256 = EDGE_LOOP('',(#58257,#58268,#58274,#58275,#58276)); +#58257 = ORIENTED_EDGE('',*,*,#58258,.F.); +#58258 = EDGE_CURVE('',#58259,#58261,#58263,.T.); +#58259 = VERTEX_POINT('',#58260); +#58260 = CARTESIAN_POINT('',(-8.725,2.72,0.8)); +#58261 = VERTEX_POINT('',#58262); +#58262 = CARTESIAN_POINT('',(-9.,2.995,0.8)); +#58263 = CIRCLE('',#58264,0.275); +#58264 = AXIS2_PLACEMENT_3D('',#58265,#58266,#58267); +#58265 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#58266 = DIRECTION('',(0.,0.,1.)); +#58267 = DIRECTION('',(1.,0.,-0.)); +#58268 = ORIENTED_EDGE('',*,*,#58269,.T.); +#58269 = EDGE_CURVE('',#58259,#58180,#58270,.T.); +#58270 = LINE('',#58271,#58272); +#58271 = CARTESIAN_POINT('',(-8.725,2.72,0.8)); +#58272 = VECTOR('',#58273,1.); +#58273 = DIRECTION('',(-0.,-0.,-1.)); +#58274 = ORIENTED_EDGE('',*,*,#58179,.T.); +#58275 = ORIENTED_EDGE('',*,*,#58132,.T.); +#58276 = ORIENTED_EDGE('',*,*,#58277,.T.); +#58277 = EDGE_CURVE('',#58125,#58261,#58278,.T.); +#58278 = LINE('',#58279,#58280); +#58279 = CARTESIAN_POINT('',(-9.,2.995,0.8)); +#58280 = VECTOR('',#58281,1.); +#58281 = DIRECTION('',(0.,0.,1.)); +#58282 = CYLINDRICAL_SURFACE('',#58283,0.275); +#58283 = AXIS2_PLACEMENT_3D('',#58284,#58285,#58286); +#58284 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#58285 = DIRECTION('',(0.,0.,1.)); +#58286 = DIRECTION('',(1.,0.,-0.)); +#58287 = ADVANCED_FACE('',(#58288),#58299,.F.); +#58288 = FACE_BOUND('',#58289,.F.); +#58289 = EDGE_LOOP('',(#58290,#58291,#58292,#58298)); +#58290 = ORIENTED_EDGE('',*,*,#58124,.F.); +#58291 = ORIENTED_EDGE('',*,*,#58227,.T.); +#58292 = ORIENTED_EDGE('',*,*,#58293,.T.); +#58293 = EDGE_CURVE('',#58228,#58261,#58294,.T.); +#58294 = LINE('',#58295,#58296); +#58295 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#58296 = VECTOR('',#58297,1.); +#58297 = DIRECTION('',(0.,-1.,0.)); +#58298 = ORIENTED_EDGE('',*,*,#58277,.F.); +#58299 = PLANE('',#58300); +#58300 = AXIS2_PLACEMENT_3D('',#58301,#58302,#58303); +#58301 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58302 = DIRECTION('',(1.,0.,0.)); +#58303 = DIRECTION('',(0.,-1.,0.)); +#58304 = ADVANCED_FACE('',(#58305),#58323,.T.); +#58305 = FACE_BOUND('',#58306,.T.); +#58306 = EDGE_LOOP('',(#58307,#58308,#58316,#58322)); +#58307 = ORIENTED_EDGE('',*,*,#58146,.T.); +#58308 = ORIENTED_EDGE('',*,*,#58309,.T.); +#58309 = EDGE_CURVE('',#58147,#58310,#58312,.T.); +#58310 = VERTEX_POINT('',#58311); +#58311 = CARTESIAN_POINT('',(-8.15,2.27,0.)); +#58312 = LINE('',#58313,#58314); +#58313 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#58314 = VECTOR('',#58315,1.); +#58315 = DIRECTION('',(0.,-1.,0.)); +#58316 = ORIENTED_EDGE('',*,*,#58317,.F.); +#58317 = EDGE_CURVE('',#58206,#58310,#58318,.T.); +#58318 = LINE('',#58319,#58320); +#58319 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58320 = VECTOR('',#58321,1.); +#58321 = DIRECTION('',(1.,0.,0.)); +#58322 = ORIENTED_EDGE('',*,*,#58213,.F.); +#58323 = PLANE('',#58324); +#58324 = AXIS2_PLACEMENT_3D('',#58325,#58326,#58327); +#58325 = CARTESIAN_POINT('',(-8.55,3.17,0.)); +#58326 = DIRECTION('',(0.,0.,-1.)); +#58327 = DIRECTION('',(0.,-1.,0.)); +#58328 = ADVANCED_FACE('',(#58329),#58354,.F.); +#58329 = FACE_BOUND('',#58330,.F.); +#58330 = EDGE_LOOP('',(#58331,#58332,#58340,#58348)); +#58331 = ORIENTED_EDGE('',*,*,#58162,.T.); +#58332 = ORIENTED_EDGE('',*,*,#58333,.T.); +#58333 = EDGE_CURVE('',#58155,#58334,#58336,.T.); +#58334 = VERTEX_POINT('',#58335); +#58335 = CARTESIAN_POINT('',(-8.15,2.27,0.4)); +#58336 = LINE('',#58337,#58338); +#58337 = CARTESIAN_POINT('',(-8.15,3.17,0.4)); +#58338 = VECTOR('',#58339,1.); +#58339 = DIRECTION('',(0.,-1.,0.)); +#58340 = ORIENTED_EDGE('',*,*,#58341,.F.); +#58341 = EDGE_CURVE('',#58342,#58334,#58344,.T.); +#58342 = VERTEX_POINT('',#58343); +#58343 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#58344 = LINE('',#58345,#58346); +#58345 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#58346 = VECTOR('',#58347,1.); +#58347 = DIRECTION('',(1.,0.,0.)); +#58348 = ORIENTED_EDGE('',*,*,#58349,.F.); +#58349 = EDGE_CURVE('',#58086,#58342,#58350,.T.); +#58350 = LINE('',#58351,#58352); +#58351 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58352 = VECTOR('',#58353,1.); +#58353 = DIRECTION('',(0.,-1.,0.)); +#58354 = PLANE('',#58355); +#58355 = AXIS2_PLACEMENT_3D('',#58356,#58357,#58358); +#58356 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58357 = DIRECTION('',(0.,0.,-1.)); +#58358 = DIRECTION('',(0.,-1.,0.)); +#58359 = ADVANCED_FACE('',(#58360),#58371,.T.); +#58360 = FACE_BOUND('',#58361,.T.); +#58361 = EDGE_LOOP('',(#58362,#58363,#58364,#58370)); +#58362 = ORIENTED_EDGE('',*,*,#58154,.T.); +#58363 = ORIENTED_EDGE('',*,*,#58333,.T.); +#58364 = ORIENTED_EDGE('',*,*,#58365,.F.); +#58365 = EDGE_CURVE('',#58310,#58334,#58366,.T.); +#58366 = LINE('',#58367,#58368); +#58367 = CARTESIAN_POINT('',(-8.15,2.27,0.)); +#58368 = VECTOR('',#58369,1.); +#58369 = DIRECTION('',(0.,0.,1.)); +#58370 = ORIENTED_EDGE('',*,*,#58309,.F.); +#58371 = PLANE('',#58372); +#58372 = AXIS2_PLACEMENT_3D('',#58373,#58374,#58375); +#58373 = CARTESIAN_POINT('',(-8.15,3.17,0.)); +#58374 = DIRECTION('',(1.,0.,0.)); +#58375 = DIRECTION('',(0.,-1.,0.)); +#58376 = ADVANCED_FACE('',(#58377),#58400,.T.); +#58377 = FACE_BOUND('',#58378,.T.); +#58378 = EDGE_LOOP('',(#58379,#58385,#58393,#58399)); +#58379 = ORIENTED_EDGE('',*,*,#58380,.T.); +#58380 = EDGE_CURVE('',#58206,#58342,#58381,.T.); +#58381 = LINE('',#58382,#58383); +#58382 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58383 = VECTOR('',#58384,1.); +#58384 = DIRECTION('',(0.,0.,1.)); +#58385 = ORIENTED_EDGE('',*,*,#58386,.T.); +#58386 = EDGE_CURVE('',#58342,#58387,#58389,.T.); +#58387 = VERTEX_POINT('',#58388); +#58388 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#58389 = LINE('',#58390,#58391); +#58390 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#58391 = VECTOR('',#58392,1.); +#58392 = DIRECTION('',(-1.,0.,0.)); +#58393 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58394 = EDGE_CURVE('',#58198,#58387,#58395,.T.); +#58395 = LINE('',#58396,#58397); +#58396 = CARTESIAN_POINT('',(-9.,2.27,0.)); +#58397 = VECTOR('',#58398,1.); +#58398 = DIRECTION('',(0.,0.,1.)); +#58399 = ORIENTED_EDGE('',*,*,#58205,.F.); +#58400 = PLANE('',#58401); +#58401 = AXIS2_PLACEMENT_3D('',#58402,#58403,#58404); +#58402 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58403 = DIRECTION('',(0.,-1.,0.)); +#58404 = DIRECTION('',(-1.,0.,0.)); +#58405 = ADVANCED_FACE('',(#58406),#58424,.F.); +#58406 = FACE_BOUND('',#58407,.F.); +#58407 = EDGE_LOOP('',(#58408,#58409,#58417,#58423)); +#58408 = ORIENTED_EDGE('',*,*,#58197,.F.); +#58409 = ORIENTED_EDGE('',*,*,#58410,.T.); +#58410 = EDGE_CURVE('',#58189,#58411,#58413,.T.); +#58411 = VERTEX_POINT('',#58412); +#58412 = CARTESIAN_POINT('',(-9.,2.445,0.4)); +#58413 = LINE('',#58414,#58415); +#58414 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#58415 = VECTOR('',#58416,1.); +#58416 = DIRECTION('',(0.,0.,1.)); +#58417 = ORIENTED_EDGE('',*,*,#58418,.T.); +#58418 = EDGE_CURVE('',#58411,#58387,#58419,.T.); +#58419 = LINE('',#58420,#58421); +#58420 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58421 = VECTOR('',#58422,1.); +#58422 = DIRECTION('',(0.,-1.,0.)); +#58423 = ORIENTED_EDGE('',*,*,#58394,.F.); +#58424 = PLANE('',#58425); +#58425 = AXIS2_PLACEMENT_3D('',#58426,#58427,#58428); +#58426 = CARTESIAN_POINT('',(-9.,3.17,0.)); +#58427 = DIRECTION('',(1.,0.,0.)); +#58428 = DIRECTION('',(0.,-1.,0.)); +#58429 = ADVANCED_FACE('',(#58430),#58450,.F.); +#58430 = FACE_BOUND('',#58431,.F.); +#58431 = EDGE_LOOP('',(#58432,#58433,#58442,#58448,#58449)); +#58432 = ORIENTED_EDGE('',*,*,#58269,.F.); +#58433 = ORIENTED_EDGE('',*,*,#58434,.F.); +#58434 = EDGE_CURVE('',#58435,#58259,#58437,.T.); +#58435 = VERTEX_POINT('',#58436); +#58436 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#58437 = CIRCLE('',#58438,0.275); +#58438 = AXIS2_PLACEMENT_3D('',#58439,#58440,#58441); +#58439 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#58440 = DIRECTION('',(0.,0.,1.)); +#58441 = DIRECTION('',(1.,0.,-0.)); +#58442 = ORIENTED_EDGE('',*,*,#58443,.F.); +#58443 = EDGE_CURVE('',#58411,#58435,#58444,.T.); +#58444 = LINE('',#58445,#58446); +#58445 = CARTESIAN_POINT('',(-9.,2.445,0.8)); +#58446 = VECTOR('',#58447,1.); +#58447 = DIRECTION('',(0.,0.,1.)); +#58448 = ORIENTED_EDGE('',*,*,#58410,.F.); +#58449 = ORIENTED_EDGE('',*,*,#58188,.T.); +#58450 = CYLINDRICAL_SURFACE('',#58451,0.275); +#58451 = AXIS2_PLACEMENT_3D('',#58452,#58453,#58454); +#58452 = CARTESIAN_POINT('',(-9.,2.72,0.8)); +#58453 = DIRECTION('',(0.,0.,1.)); +#58454 = DIRECTION('',(1.,0.,-0.)); +#58455 = ADVANCED_FACE('',(#58456),#58474,.T.); +#58456 = FACE_BOUND('',#58457,.T.); +#58457 = EDGE_LOOP('',(#58458,#58459,#58467,#58473)); +#58458 = ORIENTED_EDGE('',*,*,#58243,.T.); +#58459 = ORIENTED_EDGE('',*,*,#58460,.T.); +#58460 = EDGE_CURVE('',#58236,#58461,#58463,.T.); +#58461 = VERTEX_POINT('',#58462); +#58462 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#58463 = LINE('',#58464,#58465); +#58464 = CARTESIAN_POINT('',(-8.55,3.17,0.8)); +#58465 = VECTOR('',#58466,1.); +#58466 = DIRECTION('',(0.,-1.,0.)); +#58467 = ORIENTED_EDGE('',*,*,#58468,.F.); +#58468 = EDGE_CURVE('',#58342,#58461,#58469,.T.); +#58469 = LINE('',#58470,#58471); +#58470 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#58471 = VECTOR('',#58472,1.); +#58472 = DIRECTION('',(0.,0.,1.)); +#58473 = ORIENTED_EDGE('',*,*,#58349,.F.); +#58474 = PLANE('',#58475); +#58475 = AXIS2_PLACEMENT_3D('',#58476,#58477,#58478); +#58476 = CARTESIAN_POINT('',(-8.55,3.17,0.4)); +#58477 = DIRECTION('',(1.,0.,0.)); +#58478 = DIRECTION('',(0.,-1.,0.)); +#58479 = ADVANCED_FACE('',(#58480),#58501,.T.); +#58480 = FACE_BOUND('',#58481,.T.); +#58481 = EDGE_LOOP('',(#58482,#58483,#58484,#58485,#58486,#58494,#58500) + ); +#58482 = ORIENTED_EDGE('',*,*,#58235,.F.); +#58483 = ORIENTED_EDGE('',*,*,#58293,.T.); +#58484 = ORIENTED_EDGE('',*,*,#58258,.F.); +#58485 = ORIENTED_EDGE('',*,*,#58434,.F.); +#58486 = ORIENTED_EDGE('',*,*,#58487,.T.); +#58487 = EDGE_CURVE('',#58435,#58488,#58490,.T.); +#58488 = VERTEX_POINT('',#58489); +#58489 = CARTESIAN_POINT('',(-9.,2.27,0.8)); +#58490 = LINE('',#58491,#58492); +#58491 = CARTESIAN_POINT('',(-9.,3.17,0.8)); +#58492 = VECTOR('',#58493,1.); +#58493 = DIRECTION('',(0.,-1.,0.)); +#58494 = ORIENTED_EDGE('',*,*,#58495,.F.); +#58495 = EDGE_CURVE('',#58461,#58488,#58496,.T.); +#58496 = LINE('',#58497,#58498); +#58497 = CARTESIAN_POINT('',(-8.55,2.27,0.8)); +#58498 = VECTOR('',#58499,1.); +#58499 = DIRECTION('',(-1.,0.,0.)); +#58500 = ORIENTED_EDGE('',*,*,#58460,.F.); +#58501 = PLANE('',#58502); +#58502 = AXIS2_PLACEMENT_3D('',#58503,#58504,#58505); +#58503 = CARTESIAN_POINT('',(-8.775,2.72,0.8)); +#58504 = DIRECTION('',(0.,0.,1.)); +#58505 = DIRECTION('',(1.,0.,-0.)); +#58506 = ADVANCED_FACE('',(#58507),#58513,.T.); +#58507 = FACE_BOUND('',#58508,.T.); +#58508 = EDGE_LOOP('',(#58509,#58510,#58511,#58512)); +#58509 = ORIENTED_EDGE('',*,*,#58317,.T.); +#58510 = ORIENTED_EDGE('',*,*,#58365,.T.); +#58511 = ORIENTED_EDGE('',*,*,#58341,.F.); +#58512 = ORIENTED_EDGE('',*,*,#58380,.F.); +#58513 = PLANE('',#58514); +#58514 = AXIS2_PLACEMENT_3D('',#58515,#58516,#58517); +#58515 = CARTESIAN_POINT('',(-8.55,2.27,0.)); +#58516 = DIRECTION('',(0.,-1.,0.)); +#58517 = DIRECTION('',(0.,0.,1.)); +#58518 = ADVANCED_FACE('',(#58519),#58530,.T.); +#58519 = FACE_BOUND('',#58520,.T.); +#58520 = EDGE_LOOP('',(#58521,#58522,#58523,#58529)); +#58521 = ORIENTED_EDGE('',*,*,#58468,.T.); +#58522 = ORIENTED_EDGE('',*,*,#58495,.T.); +#58523 = ORIENTED_EDGE('',*,*,#58524,.F.); +#58524 = EDGE_CURVE('',#58387,#58488,#58525,.T.); +#58525 = LINE('',#58526,#58527); +#58526 = CARTESIAN_POINT('',(-9.,2.27,0.4)); +#58527 = VECTOR('',#58528,1.); +#58528 = DIRECTION('',(0.,0.,1.)); +#58529 = ORIENTED_EDGE('',*,*,#58386,.F.); +#58530 = PLANE('',#58531); +#58531 = AXIS2_PLACEMENT_3D('',#58532,#58533,#58534); +#58532 = CARTESIAN_POINT('',(-8.55,2.27,0.4)); +#58533 = DIRECTION('',(0.,-1.,0.)); +#58534 = DIRECTION('',(-1.,0.,0.)); +#58535 = ADVANCED_FACE('',(#58536),#58542,.F.); +#58536 = FACE_BOUND('',#58537,.F.); +#58537 = EDGE_LOOP('',(#58538,#58539,#58540,#58541)); +#58538 = ORIENTED_EDGE('',*,*,#58418,.F.); +#58539 = ORIENTED_EDGE('',*,*,#58443,.T.); +#58540 = ORIENTED_EDGE('',*,*,#58487,.T.); +#58541 = ORIENTED_EDGE('',*,*,#58524,.F.); +#58542 = PLANE('',#58543); +#58543 = AXIS2_PLACEMENT_3D('',#58544,#58545,#58546); +#58544 = CARTESIAN_POINT('',(-9.,3.17,0.4)); +#58545 = DIRECTION('',(1.,0.,0.)); +#58546 = DIRECTION('',(0.,-1.,0.)); +#58547 = MANIFOLD_SOLID_BREP('',#58548); +#58548 = CLOSED_SHELL('',(#58549,#58589,#58620,#58651,#58701,#58732, + #58765,#58782,#58806,#58837,#58854,#58883,#58907,#58933,#58957, + #58984,#58996,#59013)); +#58549 = ADVANCED_FACE('',(#58550),#58584,.T.); +#58550 = FACE_BOUND('',#58551,.T.); +#58551 = EDGE_LOOP('',(#58552,#58562,#58570,#58578)); +#58552 = ORIENTED_EDGE('',*,*,#58553,.T.); +#58553 = EDGE_CURVE('',#58554,#58556,#58558,.T.); +#58554 = VERTEX_POINT('',#58555); +#58555 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58556 = VERTEX_POINT('',#58557); +#58557 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58558 = LINE('',#58559,#58560); +#58559 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58560 = VECTOR('',#58561,1.); +#58561 = DIRECTION('',(0.,0.,1.)); +#58562 = ORIENTED_EDGE('',*,*,#58563,.T.); +#58563 = EDGE_CURVE('',#58556,#58564,#58566,.T.); +#58564 = VERTEX_POINT('',#58565); +#58565 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58566 = LINE('',#58567,#58568); +#58567 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58568 = VECTOR('',#58569,1.); +#58569 = DIRECTION('',(1.,0.,0.)); +#58570 = ORIENTED_EDGE('',*,*,#58571,.F.); +#58571 = EDGE_CURVE('',#58572,#58564,#58574,.T.); +#58572 = VERTEX_POINT('',#58573); +#58573 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58574 = LINE('',#58575,#58576); +#58575 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58576 = VECTOR('',#58577,1.); +#58577 = DIRECTION('',(0.,0.,1.)); +#58578 = ORIENTED_EDGE('',*,*,#58579,.F.); +#58579 = EDGE_CURVE('',#58554,#58572,#58580,.T.); +#58580 = LINE('',#58581,#58582); +#58581 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58582 = VECTOR('',#58583,1.); +#58583 = DIRECTION('',(1.,0.,0.)); +#58584 = PLANE('',#58585); +#58585 = AXIS2_PLACEMENT_3D('',#58586,#58587,#58588); +#58586 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58587 = DIRECTION('',(0.,1.,0.)); +#58588 = DIRECTION('',(1.,0.,0.)); +#58589 = ADVANCED_FACE('',(#58590),#58615,.F.); +#58590 = FACE_BOUND('',#58591,.F.); +#58591 = EDGE_LOOP('',(#58592,#58600,#58601,#58609)); +#58592 = ORIENTED_EDGE('',*,*,#58593,.F.); +#58593 = EDGE_CURVE('',#58554,#58594,#58596,.T.); +#58594 = VERTEX_POINT('',#58595); +#58595 = CARTESIAN_POINT('',(-9.,1.725,0.)); +#58596 = LINE('',#58597,#58598); +#58597 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58598 = VECTOR('',#58599,1.); +#58599 = DIRECTION('',(0.,-1.,0.)); +#58600 = ORIENTED_EDGE('',*,*,#58553,.T.); +#58601 = ORIENTED_EDGE('',*,*,#58602,.T.); +#58602 = EDGE_CURVE('',#58556,#58603,#58605,.T.); +#58603 = VERTEX_POINT('',#58604); +#58604 = CARTESIAN_POINT('',(-9.,1.725,0.4)); +#58605 = LINE('',#58606,#58607); +#58606 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58607 = VECTOR('',#58608,1.); +#58608 = DIRECTION('',(0.,-1.,0.)); +#58609 = ORIENTED_EDGE('',*,*,#58610,.F.); +#58610 = EDGE_CURVE('',#58594,#58603,#58611,.T.); +#58611 = LINE('',#58612,#58613); +#58612 = CARTESIAN_POINT('',(-9.,1.725,0.8)); +#58613 = VECTOR('',#58614,1.); +#58614 = DIRECTION('',(0.,0.,1.)); +#58615 = PLANE('',#58616); +#58616 = AXIS2_PLACEMENT_3D('',#58617,#58618,#58619); +#58617 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58618 = DIRECTION('',(1.,0.,0.)); +#58619 = DIRECTION('',(0.,-1.,0.)); +#58620 = ADVANCED_FACE('',(#58621),#58646,.F.); +#58621 = FACE_BOUND('',#58622,.F.); +#58622 = EDGE_LOOP('',(#58623,#58631,#58639,#58645)); +#58623 = ORIENTED_EDGE('',*,*,#58624,.T.); +#58624 = EDGE_CURVE('',#58572,#58625,#58627,.T.); +#58625 = VERTEX_POINT('',#58626); +#58626 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#58627 = LINE('',#58628,#58629); +#58628 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58629 = VECTOR('',#58630,1.); +#58630 = DIRECTION('',(1.,0.,0.)); +#58631 = ORIENTED_EDGE('',*,*,#58632,.T.); +#58632 = EDGE_CURVE('',#58625,#58633,#58635,.T.); +#58633 = VERTEX_POINT('',#58634); +#58634 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#58635 = LINE('',#58636,#58637); +#58636 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#58637 = VECTOR('',#58638,1.); +#58638 = DIRECTION('',(0.,0.,1.)); +#58639 = ORIENTED_EDGE('',*,*,#58640,.F.); +#58640 = EDGE_CURVE('',#58564,#58633,#58641,.T.); +#58641 = LINE('',#58642,#58643); +#58642 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58643 = VECTOR('',#58644,1.); +#58644 = DIRECTION('',(1.,0.,0.)); +#58645 = ORIENTED_EDGE('',*,*,#58571,.F.); +#58646 = PLANE('',#58647); +#58647 = AXIS2_PLACEMENT_3D('',#58648,#58649,#58650); +#58648 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58649 = DIRECTION('',(0.,-1.,0.)); +#58650 = DIRECTION('',(0.,0.,1.)); +#58651 = ADVANCED_FACE('',(#58652),#58696,.F.); +#58652 = FACE_BOUND('',#58653,.F.); +#58653 = EDGE_LOOP('',(#58654,#58655,#58656,#58665,#58674,#58682,#58690) + ); +#58654 = ORIENTED_EDGE('',*,*,#58579,.F.); +#58655 = ORIENTED_EDGE('',*,*,#58593,.T.); +#58656 = ORIENTED_EDGE('',*,*,#58657,.F.); +#58657 = EDGE_CURVE('',#58658,#58594,#58660,.T.); +#58658 = VERTEX_POINT('',#58659); +#58659 = CARTESIAN_POINT('',(-8.725,1.45,0.)); +#58660 = CIRCLE('',#58661,0.275); +#58661 = AXIS2_PLACEMENT_3D('',#58662,#58663,#58664); +#58662 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#58663 = DIRECTION('',(0.,0.,1.)); +#58664 = DIRECTION('',(1.,0.,-0.)); +#58665 = ORIENTED_EDGE('',*,*,#58666,.F.); +#58666 = EDGE_CURVE('',#58667,#58658,#58669,.T.); +#58667 = VERTEX_POINT('',#58668); +#58668 = CARTESIAN_POINT('',(-9.,1.175,0.)); +#58669 = CIRCLE('',#58670,0.275); +#58670 = AXIS2_PLACEMENT_3D('',#58671,#58672,#58673); +#58671 = CARTESIAN_POINT('',(-9.,1.45,0.)); +#58672 = DIRECTION('',(0.,0.,1.)); +#58673 = DIRECTION('',(1.,0.,-0.)); +#58674 = ORIENTED_EDGE('',*,*,#58675,.T.); +#58675 = EDGE_CURVE('',#58667,#58676,#58678,.T.); +#58676 = VERTEX_POINT('',#58677); +#58677 = CARTESIAN_POINT('',(-9.,1.,0.)); +#58678 = LINE('',#58679,#58680); +#58679 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58680 = VECTOR('',#58681,1.); +#58681 = DIRECTION('',(0.,-1.,0.)); +#58682 = ORIENTED_EDGE('',*,*,#58683,.F.); +#58683 = EDGE_CURVE('',#58684,#58676,#58686,.T.); +#58684 = VERTEX_POINT('',#58685); +#58685 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58686 = LINE('',#58687,#58688); +#58687 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58688 = VECTOR('',#58689,1.); +#58689 = DIRECTION('',(-1.,0.,0.)); +#58690 = ORIENTED_EDGE('',*,*,#58691,.F.); +#58691 = EDGE_CURVE('',#58572,#58684,#58692,.T.); +#58692 = LINE('',#58693,#58694); +#58693 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58694 = VECTOR('',#58695,1.); +#58695 = DIRECTION('',(0.,-1.,0.)); +#58696 = PLANE('',#58697); +#58697 = AXIS2_PLACEMENT_3D('',#58698,#58699,#58700); +#58698 = CARTESIAN_POINT('',(-8.775,1.45,0.)); +#58699 = DIRECTION('',(0.,0.,1.)); +#58700 = DIRECTION('',(1.,0.,-0.)); +#58701 = ADVANCED_FACE('',(#58702),#58727,.T.); +#58702 = FACE_BOUND('',#58703,.T.); +#58703 = EDGE_LOOP('',(#58704,#58712,#58720,#58726)); +#58704 = ORIENTED_EDGE('',*,*,#58705,.T.); +#58705 = EDGE_CURVE('',#58556,#58706,#58708,.T.); +#58706 = VERTEX_POINT('',#58707); +#58707 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#58708 = LINE('',#58709,#58710); +#58709 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58710 = VECTOR('',#58711,1.); +#58711 = DIRECTION('',(0.,0.,1.)); +#58712 = ORIENTED_EDGE('',*,*,#58713,.T.); +#58713 = EDGE_CURVE('',#58706,#58714,#58716,.T.); +#58714 = VERTEX_POINT('',#58715); +#58715 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#58716 = LINE('',#58717,#58718); +#58717 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#58718 = VECTOR('',#58719,1.); +#58719 = DIRECTION('',(1.,0.,0.)); +#58720 = ORIENTED_EDGE('',*,*,#58721,.F.); +#58721 = EDGE_CURVE('',#58564,#58714,#58722,.T.); +#58722 = LINE('',#58723,#58724); +#58723 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58724 = VECTOR('',#58725,1.); +#58725 = DIRECTION('',(0.,0.,1.)); +#58726 = ORIENTED_EDGE('',*,*,#58563,.F.); +#58727 = PLANE('',#58728); +#58728 = AXIS2_PLACEMENT_3D('',#58729,#58730,#58731); +#58729 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58730 = DIRECTION('',(0.,1.,0.)); +#58731 = DIRECTION('',(1.,0.,0.)); +#58732 = ADVANCED_FACE('',(#58733),#58760,.F.); +#58733 = FACE_BOUND('',#58734,.F.); +#58734 = EDGE_LOOP('',(#58735,#58746,#58752,#58753,#58754)); +#58735 = ORIENTED_EDGE('',*,*,#58736,.F.); +#58736 = EDGE_CURVE('',#58737,#58739,#58741,.T.); +#58737 = VERTEX_POINT('',#58738); +#58738 = CARTESIAN_POINT('',(-8.725,1.45,0.8)); +#58739 = VERTEX_POINT('',#58740); +#58740 = CARTESIAN_POINT('',(-9.,1.725,0.8)); +#58741 = CIRCLE('',#58742,0.275); +#58742 = AXIS2_PLACEMENT_3D('',#58743,#58744,#58745); +#58743 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#58744 = DIRECTION('',(0.,0.,1.)); +#58745 = DIRECTION('',(1.,0.,-0.)); +#58746 = ORIENTED_EDGE('',*,*,#58747,.T.); +#58747 = EDGE_CURVE('',#58737,#58658,#58748,.T.); +#58748 = LINE('',#58749,#58750); +#58749 = CARTESIAN_POINT('',(-8.725,1.45,0.8)); +#58750 = VECTOR('',#58751,1.); +#58751 = DIRECTION('',(-0.,-0.,-1.)); +#58752 = ORIENTED_EDGE('',*,*,#58657,.T.); +#58753 = ORIENTED_EDGE('',*,*,#58610,.T.); +#58754 = ORIENTED_EDGE('',*,*,#58755,.T.); +#58755 = EDGE_CURVE('',#58603,#58739,#58756,.T.); +#58756 = LINE('',#58757,#58758); +#58757 = CARTESIAN_POINT('',(-9.,1.725,0.8)); +#58758 = VECTOR('',#58759,1.); +#58759 = DIRECTION('',(0.,0.,1.)); +#58760 = CYLINDRICAL_SURFACE('',#58761,0.275); +#58761 = AXIS2_PLACEMENT_3D('',#58762,#58763,#58764); +#58762 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#58763 = DIRECTION('',(0.,0.,1.)); +#58764 = DIRECTION('',(1.,0.,-0.)); +#58765 = ADVANCED_FACE('',(#58766),#58777,.F.); +#58766 = FACE_BOUND('',#58767,.F.); +#58767 = EDGE_LOOP('',(#58768,#58769,#58770,#58776)); +#58768 = ORIENTED_EDGE('',*,*,#58602,.F.); +#58769 = ORIENTED_EDGE('',*,*,#58705,.T.); +#58770 = ORIENTED_EDGE('',*,*,#58771,.T.); +#58771 = EDGE_CURVE('',#58706,#58739,#58772,.T.); +#58772 = LINE('',#58773,#58774); +#58773 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#58774 = VECTOR('',#58775,1.); +#58775 = DIRECTION('',(0.,-1.,0.)); +#58776 = ORIENTED_EDGE('',*,*,#58755,.F.); +#58777 = PLANE('',#58778); +#58778 = AXIS2_PLACEMENT_3D('',#58779,#58780,#58781); +#58779 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58780 = DIRECTION('',(1.,0.,0.)); +#58781 = DIRECTION('',(0.,-1.,0.)); +#58782 = ADVANCED_FACE('',(#58783),#58801,.T.); +#58783 = FACE_BOUND('',#58784,.T.); +#58784 = EDGE_LOOP('',(#58785,#58786,#58794,#58800)); +#58785 = ORIENTED_EDGE('',*,*,#58624,.T.); +#58786 = ORIENTED_EDGE('',*,*,#58787,.T.); +#58787 = EDGE_CURVE('',#58625,#58788,#58790,.T.); +#58788 = VERTEX_POINT('',#58789); +#58789 = CARTESIAN_POINT('',(-8.15,1.,0.)); +#58790 = LINE('',#58791,#58792); +#58791 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#58792 = VECTOR('',#58793,1.); +#58793 = DIRECTION('',(0.,-1.,0.)); +#58794 = ORIENTED_EDGE('',*,*,#58795,.F.); +#58795 = EDGE_CURVE('',#58684,#58788,#58796,.T.); +#58796 = LINE('',#58797,#58798); +#58797 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58798 = VECTOR('',#58799,1.); +#58799 = DIRECTION('',(1.,0.,0.)); +#58800 = ORIENTED_EDGE('',*,*,#58691,.F.); +#58801 = PLANE('',#58802); +#58802 = AXIS2_PLACEMENT_3D('',#58803,#58804,#58805); +#58803 = CARTESIAN_POINT('',(-8.55,1.9,0.)); +#58804 = DIRECTION('',(0.,0.,-1.)); +#58805 = DIRECTION('',(0.,-1.,0.)); +#58806 = ADVANCED_FACE('',(#58807),#58832,.F.); +#58807 = FACE_BOUND('',#58808,.F.); +#58808 = EDGE_LOOP('',(#58809,#58810,#58818,#58826)); +#58809 = ORIENTED_EDGE('',*,*,#58640,.T.); +#58810 = ORIENTED_EDGE('',*,*,#58811,.T.); +#58811 = EDGE_CURVE('',#58633,#58812,#58814,.T.); +#58812 = VERTEX_POINT('',#58813); +#58813 = CARTESIAN_POINT('',(-8.15,1.,0.4)); +#58814 = LINE('',#58815,#58816); +#58815 = CARTESIAN_POINT('',(-8.15,1.9,0.4)); +#58816 = VECTOR('',#58817,1.); +#58817 = DIRECTION('',(0.,-1.,0.)); +#58818 = ORIENTED_EDGE('',*,*,#58819,.F.); +#58819 = EDGE_CURVE('',#58820,#58812,#58822,.T.); +#58820 = VERTEX_POINT('',#58821); +#58821 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#58822 = LINE('',#58823,#58824); +#58823 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#58824 = VECTOR('',#58825,1.); +#58825 = DIRECTION('',(1.,0.,0.)); +#58826 = ORIENTED_EDGE('',*,*,#58827,.F.); +#58827 = EDGE_CURVE('',#58564,#58820,#58828,.T.); +#58828 = LINE('',#58829,#58830); +#58829 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58830 = VECTOR('',#58831,1.); +#58831 = DIRECTION('',(0.,-1.,0.)); +#58832 = PLANE('',#58833); +#58833 = AXIS2_PLACEMENT_3D('',#58834,#58835,#58836); +#58834 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58835 = DIRECTION('',(0.,0.,-1.)); +#58836 = DIRECTION('',(0.,-1.,0.)); +#58837 = ADVANCED_FACE('',(#58838),#58849,.T.); +#58838 = FACE_BOUND('',#58839,.T.); +#58839 = EDGE_LOOP('',(#58840,#58841,#58842,#58848)); +#58840 = ORIENTED_EDGE('',*,*,#58632,.T.); +#58841 = ORIENTED_EDGE('',*,*,#58811,.T.); +#58842 = ORIENTED_EDGE('',*,*,#58843,.F.); +#58843 = EDGE_CURVE('',#58788,#58812,#58844,.T.); +#58844 = LINE('',#58845,#58846); +#58845 = CARTESIAN_POINT('',(-8.15,1.,0.)); +#58846 = VECTOR('',#58847,1.); +#58847 = DIRECTION('',(0.,0.,1.)); +#58848 = ORIENTED_EDGE('',*,*,#58787,.F.); +#58849 = PLANE('',#58850); +#58850 = AXIS2_PLACEMENT_3D('',#58851,#58852,#58853); +#58851 = CARTESIAN_POINT('',(-8.15,1.9,0.)); +#58852 = DIRECTION('',(1.,0.,0.)); +#58853 = DIRECTION('',(0.,-1.,0.)); +#58854 = ADVANCED_FACE('',(#58855),#58878,.T.); +#58855 = FACE_BOUND('',#58856,.T.); +#58856 = EDGE_LOOP('',(#58857,#58863,#58871,#58877)); +#58857 = ORIENTED_EDGE('',*,*,#58858,.T.); +#58858 = EDGE_CURVE('',#58684,#58820,#58859,.T.); +#58859 = LINE('',#58860,#58861); +#58860 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58861 = VECTOR('',#58862,1.); +#58862 = DIRECTION('',(0.,0.,1.)); +#58863 = ORIENTED_EDGE('',*,*,#58864,.T.); +#58864 = EDGE_CURVE('',#58820,#58865,#58867,.T.); +#58865 = VERTEX_POINT('',#58866); +#58866 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#58867 = LINE('',#58868,#58869); +#58868 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#58869 = VECTOR('',#58870,1.); +#58870 = DIRECTION('',(-1.,0.,0.)); +#58871 = ORIENTED_EDGE('',*,*,#58872,.F.); +#58872 = EDGE_CURVE('',#58676,#58865,#58873,.T.); +#58873 = LINE('',#58874,#58875); +#58874 = CARTESIAN_POINT('',(-9.,1.,0.)); +#58875 = VECTOR('',#58876,1.); +#58876 = DIRECTION('',(0.,0.,1.)); +#58877 = ORIENTED_EDGE('',*,*,#58683,.F.); +#58878 = PLANE('',#58879); +#58879 = AXIS2_PLACEMENT_3D('',#58880,#58881,#58882); +#58880 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58881 = DIRECTION('',(0.,-1.,0.)); +#58882 = DIRECTION('',(-1.,0.,0.)); +#58883 = ADVANCED_FACE('',(#58884),#58902,.F.); +#58884 = FACE_BOUND('',#58885,.F.); +#58885 = EDGE_LOOP('',(#58886,#58887,#58895,#58901)); +#58886 = ORIENTED_EDGE('',*,*,#58675,.F.); +#58887 = ORIENTED_EDGE('',*,*,#58888,.T.); +#58888 = EDGE_CURVE('',#58667,#58889,#58891,.T.); +#58889 = VERTEX_POINT('',#58890); +#58890 = CARTESIAN_POINT('',(-9.,1.175,0.4)); +#58891 = LINE('',#58892,#58893); +#58892 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#58893 = VECTOR('',#58894,1.); +#58894 = DIRECTION('',(0.,0.,1.)); +#58895 = ORIENTED_EDGE('',*,*,#58896,.T.); +#58896 = EDGE_CURVE('',#58889,#58865,#58897,.T.); +#58897 = LINE('',#58898,#58899); +#58898 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#58899 = VECTOR('',#58900,1.); +#58900 = DIRECTION('',(0.,-1.,0.)); +#58901 = ORIENTED_EDGE('',*,*,#58872,.F.); +#58902 = PLANE('',#58903); +#58903 = AXIS2_PLACEMENT_3D('',#58904,#58905,#58906); +#58904 = CARTESIAN_POINT('',(-9.,1.9,0.)); +#58905 = DIRECTION('',(1.,0.,0.)); +#58906 = DIRECTION('',(0.,-1.,0.)); +#58907 = ADVANCED_FACE('',(#58908),#58928,.F.); +#58908 = FACE_BOUND('',#58909,.F.); +#58909 = EDGE_LOOP('',(#58910,#58911,#58920,#58926,#58927)); +#58910 = ORIENTED_EDGE('',*,*,#58747,.F.); +#58911 = ORIENTED_EDGE('',*,*,#58912,.F.); +#58912 = EDGE_CURVE('',#58913,#58737,#58915,.T.); +#58913 = VERTEX_POINT('',#58914); +#58914 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#58915 = CIRCLE('',#58916,0.275); +#58916 = AXIS2_PLACEMENT_3D('',#58917,#58918,#58919); +#58917 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#58918 = DIRECTION('',(0.,0.,1.)); +#58919 = DIRECTION('',(1.,0.,-0.)); +#58920 = ORIENTED_EDGE('',*,*,#58921,.F.); +#58921 = EDGE_CURVE('',#58889,#58913,#58922,.T.); +#58922 = LINE('',#58923,#58924); +#58923 = CARTESIAN_POINT('',(-9.,1.175,0.8)); +#58924 = VECTOR('',#58925,1.); +#58925 = DIRECTION('',(0.,0.,1.)); +#58926 = ORIENTED_EDGE('',*,*,#58888,.F.); +#58927 = ORIENTED_EDGE('',*,*,#58666,.T.); +#58928 = CYLINDRICAL_SURFACE('',#58929,0.275); +#58929 = AXIS2_PLACEMENT_3D('',#58930,#58931,#58932); +#58930 = CARTESIAN_POINT('',(-9.,1.45,0.8)); +#58931 = DIRECTION('',(0.,0.,1.)); +#58932 = DIRECTION('',(1.,0.,-0.)); +#58933 = ADVANCED_FACE('',(#58934),#58952,.T.); +#58934 = FACE_BOUND('',#58935,.T.); +#58935 = EDGE_LOOP('',(#58936,#58937,#58945,#58951)); +#58936 = ORIENTED_EDGE('',*,*,#58721,.T.); +#58937 = ORIENTED_EDGE('',*,*,#58938,.T.); +#58938 = EDGE_CURVE('',#58714,#58939,#58941,.T.); +#58939 = VERTEX_POINT('',#58940); +#58940 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#58941 = LINE('',#58942,#58943); +#58942 = CARTESIAN_POINT('',(-8.55,1.9,0.8)); +#58943 = VECTOR('',#58944,1.); +#58944 = DIRECTION('',(0.,-1.,0.)); +#58945 = ORIENTED_EDGE('',*,*,#58946,.F.); +#58946 = EDGE_CURVE('',#58820,#58939,#58947,.T.); +#58947 = LINE('',#58948,#58949); +#58948 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#58949 = VECTOR('',#58950,1.); +#58950 = DIRECTION('',(0.,0.,1.)); +#58951 = ORIENTED_EDGE('',*,*,#58827,.F.); +#58952 = PLANE('',#58953); +#58953 = AXIS2_PLACEMENT_3D('',#58954,#58955,#58956); +#58954 = CARTESIAN_POINT('',(-8.55,1.9,0.4)); +#58955 = DIRECTION('',(1.,0.,0.)); +#58956 = DIRECTION('',(0.,-1.,0.)); +#58957 = ADVANCED_FACE('',(#58958),#58979,.T.); +#58958 = FACE_BOUND('',#58959,.T.); +#58959 = EDGE_LOOP('',(#58960,#58961,#58962,#58963,#58964,#58972,#58978) + ); +#58960 = ORIENTED_EDGE('',*,*,#58713,.F.); +#58961 = ORIENTED_EDGE('',*,*,#58771,.T.); +#58962 = ORIENTED_EDGE('',*,*,#58736,.F.); +#58963 = ORIENTED_EDGE('',*,*,#58912,.F.); +#58964 = ORIENTED_EDGE('',*,*,#58965,.T.); +#58965 = EDGE_CURVE('',#58913,#58966,#58968,.T.); +#58966 = VERTEX_POINT('',#58967); +#58967 = CARTESIAN_POINT('',(-9.,1.,0.8)); +#58968 = LINE('',#58969,#58970); +#58969 = CARTESIAN_POINT('',(-9.,1.9,0.8)); +#58970 = VECTOR('',#58971,1.); +#58971 = DIRECTION('',(0.,-1.,0.)); +#58972 = ORIENTED_EDGE('',*,*,#58973,.F.); +#58973 = EDGE_CURVE('',#58939,#58966,#58974,.T.); +#58974 = LINE('',#58975,#58976); +#58975 = CARTESIAN_POINT('',(-8.55,1.,0.8)); +#58976 = VECTOR('',#58977,1.); +#58977 = DIRECTION('',(-1.,0.,0.)); +#58978 = ORIENTED_EDGE('',*,*,#58938,.F.); +#58979 = PLANE('',#58980); +#58980 = AXIS2_PLACEMENT_3D('',#58981,#58982,#58983); +#58981 = CARTESIAN_POINT('',(-8.775,1.45,0.8)); +#58982 = DIRECTION('',(0.,0.,1.)); +#58983 = DIRECTION('',(1.,0.,-0.)); +#58984 = ADVANCED_FACE('',(#58985),#58991,.T.); +#58985 = FACE_BOUND('',#58986,.T.); +#58986 = EDGE_LOOP('',(#58987,#58988,#58989,#58990)); +#58987 = ORIENTED_EDGE('',*,*,#58795,.T.); +#58988 = ORIENTED_EDGE('',*,*,#58843,.T.); +#58989 = ORIENTED_EDGE('',*,*,#58819,.F.); +#58990 = ORIENTED_EDGE('',*,*,#58858,.F.); +#58991 = PLANE('',#58992); +#58992 = AXIS2_PLACEMENT_3D('',#58993,#58994,#58995); +#58993 = CARTESIAN_POINT('',(-8.55,1.,0.)); +#58994 = DIRECTION('',(0.,-1.,0.)); +#58995 = DIRECTION('',(0.,0.,1.)); +#58996 = ADVANCED_FACE('',(#58997),#59008,.T.); +#58997 = FACE_BOUND('',#58998,.T.); +#58998 = EDGE_LOOP('',(#58999,#59000,#59001,#59007)); +#58999 = ORIENTED_EDGE('',*,*,#58946,.T.); +#59000 = ORIENTED_EDGE('',*,*,#58973,.T.); +#59001 = ORIENTED_EDGE('',*,*,#59002,.F.); +#59002 = EDGE_CURVE('',#58865,#58966,#59003,.T.); +#59003 = LINE('',#59004,#59005); +#59004 = CARTESIAN_POINT('',(-9.,1.,0.4)); +#59005 = VECTOR('',#59006,1.); +#59006 = DIRECTION('',(0.,0.,1.)); +#59007 = ORIENTED_EDGE('',*,*,#58864,.F.); +#59008 = PLANE('',#59009); +#59009 = AXIS2_PLACEMENT_3D('',#59010,#59011,#59012); +#59010 = CARTESIAN_POINT('',(-8.55,1.,0.4)); +#59011 = DIRECTION('',(0.,-1.,0.)); +#59012 = DIRECTION('',(-1.,0.,0.)); +#59013 = ADVANCED_FACE('',(#59014),#59020,.F.); +#59014 = FACE_BOUND('',#59015,.F.); +#59015 = EDGE_LOOP('',(#59016,#59017,#59018,#59019)); +#59016 = ORIENTED_EDGE('',*,*,#58896,.F.); +#59017 = ORIENTED_EDGE('',*,*,#58921,.T.); +#59018 = ORIENTED_EDGE('',*,*,#58965,.T.); +#59019 = ORIENTED_EDGE('',*,*,#59002,.F.); +#59020 = PLANE('',#59021); +#59021 = AXIS2_PLACEMENT_3D('',#59022,#59023,#59024); +#59022 = CARTESIAN_POINT('',(-9.,1.9,0.4)); +#59023 = DIRECTION('',(1.,0.,0.)); +#59024 = DIRECTION('',(0.,-1.,0.)); +#59025 = MANIFOLD_SOLID_BREP('',#59026); +#59026 = CLOSED_SHELL('',(#59027,#59067,#59098,#59129,#59179,#59210, + #59243,#59260,#59284,#59315,#59332,#59361,#59385,#59411,#59435, + #59462,#59474,#59491)); +#59027 = ADVANCED_FACE('',(#59028),#59062,.T.); +#59028 = FACE_BOUND('',#59029,.T.); +#59029 = EDGE_LOOP('',(#59030,#59040,#59048,#59056)); +#59030 = ORIENTED_EDGE('',*,*,#59031,.T.); +#59031 = EDGE_CURVE('',#59032,#59034,#59036,.T.); +#59032 = VERTEX_POINT('',#59033); +#59033 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59034 = VERTEX_POINT('',#59035); +#59035 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59036 = LINE('',#59037,#59038); +#59037 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59038 = VECTOR('',#59039,1.); +#59039 = DIRECTION('',(0.,0.,1.)); +#59040 = ORIENTED_EDGE('',*,*,#59041,.T.); +#59041 = EDGE_CURVE('',#59034,#59042,#59044,.T.); +#59042 = VERTEX_POINT('',#59043); +#59043 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59044 = LINE('',#59045,#59046); +#59045 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59046 = VECTOR('',#59047,1.); +#59047 = DIRECTION('',(1.,0.,0.)); +#59048 = ORIENTED_EDGE('',*,*,#59049,.F.); +#59049 = EDGE_CURVE('',#59050,#59042,#59052,.T.); +#59050 = VERTEX_POINT('',#59051); +#59051 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59052 = LINE('',#59053,#59054); +#59053 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59054 = VECTOR('',#59055,1.); +#59055 = DIRECTION('',(0.,0.,1.)); +#59056 = ORIENTED_EDGE('',*,*,#59057,.F.); +#59057 = EDGE_CURVE('',#59032,#59050,#59058,.T.); +#59058 = LINE('',#59059,#59060); +#59059 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59060 = VECTOR('',#59061,1.); +#59061 = DIRECTION('',(1.,0.,0.)); +#59062 = PLANE('',#59063); +#59063 = AXIS2_PLACEMENT_3D('',#59064,#59065,#59066); +#59064 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59065 = DIRECTION('',(0.,1.,0.)); +#59066 = DIRECTION('',(1.,0.,0.)); +#59067 = ADVANCED_FACE('',(#59068),#59093,.F.); +#59068 = FACE_BOUND('',#59069,.F.); +#59069 = EDGE_LOOP('',(#59070,#59078,#59079,#59087)); +#59070 = ORIENTED_EDGE('',*,*,#59071,.F.); +#59071 = EDGE_CURVE('',#59032,#59072,#59074,.T.); +#59072 = VERTEX_POINT('',#59073); +#59073 = CARTESIAN_POINT('',(-9.,0.455,0.)); +#59074 = LINE('',#59075,#59076); +#59075 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59076 = VECTOR('',#59077,1.); +#59077 = DIRECTION('',(0.,-1.,0.)); +#59078 = ORIENTED_EDGE('',*,*,#59031,.T.); +#59079 = ORIENTED_EDGE('',*,*,#59080,.T.); +#59080 = EDGE_CURVE('',#59034,#59081,#59083,.T.); +#59081 = VERTEX_POINT('',#59082); +#59082 = CARTESIAN_POINT('',(-9.,0.455,0.4)); +#59083 = LINE('',#59084,#59085); +#59084 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59085 = VECTOR('',#59086,1.); +#59086 = DIRECTION('',(0.,-1.,0.)); +#59087 = ORIENTED_EDGE('',*,*,#59088,.F.); +#59088 = EDGE_CURVE('',#59072,#59081,#59089,.T.); +#59089 = LINE('',#59090,#59091); +#59090 = CARTESIAN_POINT('',(-9.,0.455,0.8)); +#59091 = VECTOR('',#59092,1.); +#59092 = DIRECTION('',(0.,0.,1.)); +#59093 = PLANE('',#59094); +#59094 = AXIS2_PLACEMENT_3D('',#59095,#59096,#59097); +#59095 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59096 = DIRECTION('',(1.,0.,0.)); +#59097 = DIRECTION('',(0.,-1.,0.)); +#59098 = ADVANCED_FACE('',(#59099),#59124,.F.); +#59099 = FACE_BOUND('',#59100,.F.); +#59100 = EDGE_LOOP('',(#59101,#59109,#59117,#59123)); +#59101 = ORIENTED_EDGE('',*,*,#59102,.T.); +#59102 = EDGE_CURVE('',#59050,#59103,#59105,.T.); +#59103 = VERTEX_POINT('',#59104); +#59104 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#59105 = LINE('',#59106,#59107); +#59106 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59107 = VECTOR('',#59108,1.); +#59108 = DIRECTION('',(1.,0.,0.)); +#59109 = ORIENTED_EDGE('',*,*,#59110,.T.); +#59110 = EDGE_CURVE('',#59103,#59111,#59113,.T.); +#59111 = VERTEX_POINT('',#59112); +#59112 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#59113 = LINE('',#59114,#59115); +#59114 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#59115 = VECTOR('',#59116,1.); +#59116 = DIRECTION('',(0.,0.,1.)); +#59117 = ORIENTED_EDGE('',*,*,#59118,.F.); +#59118 = EDGE_CURVE('',#59042,#59111,#59119,.T.); +#59119 = LINE('',#59120,#59121); +#59120 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59121 = VECTOR('',#59122,1.); +#59122 = DIRECTION('',(1.,0.,0.)); +#59123 = ORIENTED_EDGE('',*,*,#59049,.F.); +#59124 = PLANE('',#59125); +#59125 = AXIS2_PLACEMENT_3D('',#59126,#59127,#59128); +#59126 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59127 = DIRECTION('',(0.,-1.,0.)); +#59128 = DIRECTION('',(0.,0.,1.)); +#59129 = ADVANCED_FACE('',(#59130),#59174,.F.); +#59130 = FACE_BOUND('',#59131,.F.); +#59131 = EDGE_LOOP('',(#59132,#59133,#59134,#59143,#59152,#59160,#59168) + ); +#59132 = ORIENTED_EDGE('',*,*,#59057,.F.); +#59133 = ORIENTED_EDGE('',*,*,#59071,.T.); +#59134 = ORIENTED_EDGE('',*,*,#59135,.F.); +#59135 = EDGE_CURVE('',#59136,#59072,#59138,.T.); +#59136 = VERTEX_POINT('',#59137); +#59137 = CARTESIAN_POINT('',(-8.725,0.18,0.)); +#59138 = CIRCLE('',#59139,0.275); +#59139 = AXIS2_PLACEMENT_3D('',#59140,#59141,#59142); +#59140 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#59141 = DIRECTION('',(0.,0.,1.)); +#59142 = DIRECTION('',(1.,0.,-0.)); +#59143 = ORIENTED_EDGE('',*,*,#59144,.F.); +#59144 = EDGE_CURVE('',#59145,#59136,#59147,.T.); +#59145 = VERTEX_POINT('',#59146); +#59146 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.)); +#59147 = CIRCLE('',#59148,0.275); +#59148 = AXIS2_PLACEMENT_3D('',#59149,#59150,#59151); +#59149 = CARTESIAN_POINT('',(-9.,0.18,0.)); +#59150 = DIRECTION('',(0.,0.,1.)); +#59151 = DIRECTION('',(1.,0.,-0.)); +#59152 = ORIENTED_EDGE('',*,*,#59153,.T.); +#59153 = EDGE_CURVE('',#59145,#59154,#59156,.T.); +#59154 = VERTEX_POINT('',#59155); +#59155 = CARTESIAN_POINT('',(-9.,-0.27,0.)); +#59156 = LINE('',#59157,#59158); +#59157 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59158 = VECTOR('',#59159,1.); +#59159 = DIRECTION('',(0.,-1.,0.)); +#59160 = ORIENTED_EDGE('',*,*,#59161,.F.); +#59161 = EDGE_CURVE('',#59162,#59154,#59164,.T.); +#59162 = VERTEX_POINT('',#59163); +#59163 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59164 = LINE('',#59165,#59166); +#59165 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59166 = VECTOR('',#59167,1.); +#59167 = DIRECTION('',(-1.,0.,0.)); +#59168 = ORIENTED_EDGE('',*,*,#59169,.F.); +#59169 = EDGE_CURVE('',#59050,#59162,#59170,.T.); +#59170 = LINE('',#59171,#59172); +#59171 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59172 = VECTOR('',#59173,1.); +#59173 = DIRECTION('',(0.,-1.,0.)); +#59174 = PLANE('',#59175); +#59175 = AXIS2_PLACEMENT_3D('',#59176,#59177,#59178); +#59176 = CARTESIAN_POINT('',(-8.775,0.18,0.)); +#59177 = DIRECTION('',(0.,0.,1.)); +#59178 = DIRECTION('',(1.,0.,-0.)); +#59179 = ADVANCED_FACE('',(#59180),#59205,.T.); +#59180 = FACE_BOUND('',#59181,.T.); +#59181 = EDGE_LOOP('',(#59182,#59190,#59198,#59204)); +#59182 = ORIENTED_EDGE('',*,*,#59183,.T.); +#59183 = EDGE_CURVE('',#59034,#59184,#59186,.T.); +#59184 = VERTEX_POINT('',#59185); +#59185 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#59186 = LINE('',#59187,#59188); +#59187 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59188 = VECTOR('',#59189,1.); +#59189 = DIRECTION('',(0.,0.,1.)); +#59190 = ORIENTED_EDGE('',*,*,#59191,.T.); +#59191 = EDGE_CURVE('',#59184,#59192,#59194,.T.); +#59192 = VERTEX_POINT('',#59193); +#59193 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#59194 = LINE('',#59195,#59196); +#59195 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#59196 = VECTOR('',#59197,1.); +#59197 = DIRECTION('',(1.,0.,0.)); +#59198 = ORIENTED_EDGE('',*,*,#59199,.F.); +#59199 = EDGE_CURVE('',#59042,#59192,#59200,.T.); +#59200 = LINE('',#59201,#59202); +#59201 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59202 = VECTOR('',#59203,1.); +#59203 = DIRECTION('',(0.,0.,1.)); +#59204 = ORIENTED_EDGE('',*,*,#59041,.F.); +#59205 = PLANE('',#59206); +#59206 = AXIS2_PLACEMENT_3D('',#59207,#59208,#59209); +#59207 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59208 = DIRECTION('',(0.,1.,0.)); +#59209 = DIRECTION('',(1.,0.,0.)); +#59210 = ADVANCED_FACE('',(#59211),#59238,.F.); +#59211 = FACE_BOUND('',#59212,.F.); +#59212 = EDGE_LOOP('',(#59213,#59224,#59230,#59231,#59232)); +#59213 = ORIENTED_EDGE('',*,*,#59214,.F.); +#59214 = EDGE_CURVE('',#59215,#59217,#59219,.T.); +#59215 = VERTEX_POINT('',#59216); +#59216 = CARTESIAN_POINT('',(-8.725,0.18,0.8)); +#59217 = VERTEX_POINT('',#59218); +#59218 = CARTESIAN_POINT('',(-9.,0.455,0.8)); +#59219 = CIRCLE('',#59220,0.275); +#59220 = AXIS2_PLACEMENT_3D('',#59221,#59222,#59223); +#59221 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#59222 = DIRECTION('',(0.,0.,1.)); +#59223 = DIRECTION('',(1.,0.,-0.)); +#59224 = ORIENTED_EDGE('',*,*,#59225,.T.); +#59225 = EDGE_CURVE('',#59215,#59136,#59226,.T.); +#59226 = LINE('',#59227,#59228); +#59227 = CARTESIAN_POINT('',(-8.725,0.18,0.8)); +#59228 = VECTOR('',#59229,1.); +#59229 = DIRECTION('',(-0.,-0.,-1.)); +#59230 = ORIENTED_EDGE('',*,*,#59135,.T.); +#59231 = ORIENTED_EDGE('',*,*,#59088,.T.); +#59232 = ORIENTED_EDGE('',*,*,#59233,.T.); +#59233 = EDGE_CURVE('',#59081,#59217,#59234,.T.); +#59234 = LINE('',#59235,#59236); +#59235 = CARTESIAN_POINT('',(-9.,0.455,0.8)); +#59236 = VECTOR('',#59237,1.); +#59237 = DIRECTION('',(0.,0.,1.)); +#59238 = CYLINDRICAL_SURFACE('',#59239,0.275); +#59239 = AXIS2_PLACEMENT_3D('',#59240,#59241,#59242); +#59240 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#59241 = DIRECTION('',(0.,0.,1.)); +#59242 = DIRECTION('',(1.,0.,-0.)); +#59243 = ADVANCED_FACE('',(#59244),#59255,.F.); +#59244 = FACE_BOUND('',#59245,.F.); +#59245 = EDGE_LOOP('',(#59246,#59247,#59248,#59254)); +#59246 = ORIENTED_EDGE('',*,*,#59080,.F.); +#59247 = ORIENTED_EDGE('',*,*,#59183,.T.); +#59248 = ORIENTED_EDGE('',*,*,#59249,.T.); +#59249 = EDGE_CURVE('',#59184,#59217,#59250,.T.); +#59250 = LINE('',#59251,#59252); +#59251 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#59252 = VECTOR('',#59253,1.); +#59253 = DIRECTION('',(0.,-1.,0.)); +#59254 = ORIENTED_EDGE('',*,*,#59233,.F.); +#59255 = PLANE('',#59256); +#59256 = AXIS2_PLACEMENT_3D('',#59257,#59258,#59259); +#59257 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59258 = DIRECTION('',(1.,0.,0.)); +#59259 = DIRECTION('',(0.,-1.,0.)); +#59260 = ADVANCED_FACE('',(#59261),#59279,.T.); +#59261 = FACE_BOUND('',#59262,.T.); +#59262 = EDGE_LOOP('',(#59263,#59264,#59272,#59278)); +#59263 = ORIENTED_EDGE('',*,*,#59102,.T.); +#59264 = ORIENTED_EDGE('',*,*,#59265,.T.); +#59265 = EDGE_CURVE('',#59103,#59266,#59268,.T.); +#59266 = VERTEX_POINT('',#59267); +#59267 = CARTESIAN_POINT('',(-8.15,-0.27,0.)); +#59268 = LINE('',#59269,#59270); +#59269 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#59270 = VECTOR('',#59271,1.); +#59271 = DIRECTION('',(0.,-1.,0.)); +#59272 = ORIENTED_EDGE('',*,*,#59273,.F.); +#59273 = EDGE_CURVE('',#59162,#59266,#59274,.T.); +#59274 = LINE('',#59275,#59276); +#59275 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59276 = VECTOR('',#59277,1.); +#59277 = DIRECTION('',(1.,0.,0.)); +#59278 = ORIENTED_EDGE('',*,*,#59169,.F.); +#59279 = PLANE('',#59280); +#59280 = AXIS2_PLACEMENT_3D('',#59281,#59282,#59283); +#59281 = CARTESIAN_POINT('',(-8.55,0.63,0.)); +#59282 = DIRECTION('',(0.,0.,-1.)); +#59283 = DIRECTION('',(0.,-1.,0.)); +#59284 = ADVANCED_FACE('',(#59285),#59310,.F.); +#59285 = FACE_BOUND('',#59286,.F.); +#59286 = EDGE_LOOP('',(#59287,#59288,#59296,#59304)); +#59287 = ORIENTED_EDGE('',*,*,#59118,.T.); +#59288 = ORIENTED_EDGE('',*,*,#59289,.T.); +#59289 = EDGE_CURVE('',#59111,#59290,#59292,.T.); +#59290 = VERTEX_POINT('',#59291); +#59291 = CARTESIAN_POINT('',(-8.15,-0.27,0.4)); +#59292 = LINE('',#59293,#59294); +#59293 = CARTESIAN_POINT('',(-8.15,0.63,0.4)); +#59294 = VECTOR('',#59295,1.); +#59295 = DIRECTION('',(0.,-1.,0.)); +#59296 = ORIENTED_EDGE('',*,*,#59297,.F.); +#59297 = EDGE_CURVE('',#59298,#59290,#59300,.T.); +#59298 = VERTEX_POINT('',#59299); +#59299 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#59300 = LINE('',#59301,#59302); +#59301 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#59302 = VECTOR('',#59303,1.); +#59303 = DIRECTION('',(1.,0.,0.)); +#59304 = ORIENTED_EDGE('',*,*,#59305,.F.); +#59305 = EDGE_CURVE('',#59042,#59298,#59306,.T.); +#59306 = LINE('',#59307,#59308); +#59307 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59308 = VECTOR('',#59309,1.); +#59309 = DIRECTION('',(0.,-1.,0.)); +#59310 = PLANE('',#59311); +#59311 = AXIS2_PLACEMENT_3D('',#59312,#59313,#59314); +#59312 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59313 = DIRECTION('',(0.,0.,-1.)); +#59314 = DIRECTION('',(0.,-1.,0.)); +#59315 = ADVANCED_FACE('',(#59316),#59327,.T.); +#59316 = FACE_BOUND('',#59317,.T.); +#59317 = EDGE_LOOP('',(#59318,#59319,#59320,#59326)); +#59318 = ORIENTED_EDGE('',*,*,#59110,.T.); +#59319 = ORIENTED_EDGE('',*,*,#59289,.T.); +#59320 = ORIENTED_EDGE('',*,*,#59321,.F.); +#59321 = EDGE_CURVE('',#59266,#59290,#59322,.T.); +#59322 = LINE('',#59323,#59324); +#59323 = CARTESIAN_POINT('',(-8.15,-0.27,0.)); +#59324 = VECTOR('',#59325,1.); +#59325 = DIRECTION('',(0.,0.,1.)); +#59326 = ORIENTED_EDGE('',*,*,#59265,.F.); +#59327 = PLANE('',#59328); +#59328 = AXIS2_PLACEMENT_3D('',#59329,#59330,#59331); +#59329 = CARTESIAN_POINT('',(-8.15,0.63,0.)); +#59330 = DIRECTION('',(1.,0.,0.)); +#59331 = DIRECTION('',(0.,-1.,0.)); +#59332 = ADVANCED_FACE('',(#59333),#59356,.T.); +#59333 = FACE_BOUND('',#59334,.T.); +#59334 = EDGE_LOOP('',(#59335,#59341,#59349,#59355)); +#59335 = ORIENTED_EDGE('',*,*,#59336,.T.); +#59336 = EDGE_CURVE('',#59162,#59298,#59337,.T.); +#59337 = LINE('',#59338,#59339); +#59338 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59339 = VECTOR('',#59340,1.); +#59340 = DIRECTION('',(0.,0.,1.)); +#59341 = ORIENTED_EDGE('',*,*,#59342,.T.); +#59342 = EDGE_CURVE('',#59298,#59343,#59345,.T.); +#59343 = VERTEX_POINT('',#59344); +#59344 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#59345 = LINE('',#59346,#59347); +#59346 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#59347 = VECTOR('',#59348,1.); +#59348 = DIRECTION('',(-1.,0.,0.)); +#59349 = ORIENTED_EDGE('',*,*,#59350,.F.); +#59350 = EDGE_CURVE('',#59154,#59343,#59351,.T.); +#59351 = LINE('',#59352,#59353); +#59352 = CARTESIAN_POINT('',(-9.,-0.27,0.)); +#59353 = VECTOR('',#59354,1.); +#59354 = DIRECTION('',(0.,0.,1.)); +#59355 = ORIENTED_EDGE('',*,*,#59161,.F.); +#59356 = PLANE('',#59357); +#59357 = AXIS2_PLACEMENT_3D('',#59358,#59359,#59360); +#59358 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59359 = DIRECTION('',(0.,-1.,0.)); +#59360 = DIRECTION('',(-1.,0.,0.)); +#59361 = ADVANCED_FACE('',(#59362),#59380,.F.); +#59362 = FACE_BOUND('',#59363,.F.); +#59363 = EDGE_LOOP('',(#59364,#59365,#59373,#59379)); +#59364 = ORIENTED_EDGE('',*,*,#59153,.F.); +#59365 = ORIENTED_EDGE('',*,*,#59366,.T.); +#59366 = EDGE_CURVE('',#59145,#59367,#59369,.T.); +#59367 = VERTEX_POINT('',#59368); +#59368 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.4)); +#59369 = LINE('',#59370,#59371); +#59370 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#59371 = VECTOR('',#59372,1.); +#59372 = DIRECTION('',(0.,0.,1.)); +#59373 = ORIENTED_EDGE('',*,*,#59374,.T.); +#59374 = EDGE_CURVE('',#59367,#59343,#59375,.T.); +#59375 = LINE('',#59376,#59377); +#59376 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59377 = VECTOR('',#59378,1.); +#59378 = DIRECTION('',(0.,-1.,0.)); +#59379 = ORIENTED_EDGE('',*,*,#59350,.F.); +#59380 = PLANE('',#59381); +#59381 = AXIS2_PLACEMENT_3D('',#59382,#59383,#59384); +#59382 = CARTESIAN_POINT('',(-9.,0.63,0.)); +#59383 = DIRECTION('',(1.,0.,0.)); +#59384 = DIRECTION('',(0.,-1.,0.)); +#59385 = ADVANCED_FACE('',(#59386),#59406,.F.); +#59386 = FACE_BOUND('',#59387,.F.); +#59387 = EDGE_LOOP('',(#59388,#59389,#59398,#59404,#59405)); +#59388 = ORIENTED_EDGE('',*,*,#59225,.F.); +#59389 = ORIENTED_EDGE('',*,*,#59390,.F.); +#59390 = EDGE_CURVE('',#59391,#59215,#59393,.T.); +#59391 = VERTEX_POINT('',#59392); +#59392 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#59393 = CIRCLE('',#59394,0.275); +#59394 = AXIS2_PLACEMENT_3D('',#59395,#59396,#59397); +#59395 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#59396 = DIRECTION('',(0.,0.,1.)); +#59397 = DIRECTION('',(1.,0.,-0.)); +#59398 = ORIENTED_EDGE('',*,*,#59399,.F.); +#59399 = EDGE_CURVE('',#59367,#59391,#59400,.T.); +#59400 = LINE('',#59401,#59402); +#59401 = CARTESIAN_POINT('',(-9.,-9.5E-02,0.8)); +#59402 = VECTOR('',#59403,1.); +#59403 = DIRECTION('',(0.,0.,1.)); +#59404 = ORIENTED_EDGE('',*,*,#59366,.F.); +#59405 = ORIENTED_EDGE('',*,*,#59144,.T.); +#59406 = CYLINDRICAL_SURFACE('',#59407,0.275); +#59407 = AXIS2_PLACEMENT_3D('',#59408,#59409,#59410); +#59408 = CARTESIAN_POINT('',(-9.,0.18,0.8)); +#59409 = DIRECTION('',(0.,0.,1.)); +#59410 = DIRECTION('',(1.,0.,-0.)); +#59411 = ADVANCED_FACE('',(#59412),#59430,.T.); +#59412 = FACE_BOUND('',#59413,.T.); +#59413 = EDGE_LOOP('',(#59414,#59415,#59423,#59429)); +#59414 = ORIENTED_EDGE('',*,*,#59199,.T.); +#59415 = ORIENTED_EDGE('',*,*,#59416,.T.); +#59416 = EDGE_CURVE('',#59192,#59417,#59419,.T.); +#59417 = VERTEX_POINT('',#59418); +#59418 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#59419 = LINE('',#59420,#59421); +#59420 = CARTESIAN_POINT('',(-8.55,0.63,0.8)); +#59421 = VECTOR('',#59422,1.); +#59422 = DIRECTION('',(0.,-1.,0.)); +#59423 = ORIENTED_EDGE('',*,*,#59424,.F.); +#59424 = EDGE_CURVE('',#59298,#59417,#59425,.T.); +#59425 = LINE('',#59426,#59427); +#59426 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#59427 = VECTOR('',#59428,1.); +#59428 = DIRECTION('',(0.,0.,1.)); +#59429 = ORIENTED_EDGE('',*,*,#59305,.F.); +#59430 = PLANE('',#59431); +#59431 = AXIS2_PLACEMENT_3D('',#59432,#59433,#59434); +#59432 = CARTESIAN_POINT('',(-8.55,0.63,0.4)); +#59433 = DIRECTION('',(1.,0.,0.)); +#59434 = DIRECTION('',(0.,-1.,0.)); +#59435 = ADVANCED_FACE('',(#59436),#59457,.T.); +#59436 = FACE_BOUND('',#59437,.T.); +#59437 = EDGE_LOOP('',(#59438,#59439,#59440,#59441,#59442,#59450,#59456) + ); +#59438 = ORIENTED_EDGE('',*,*,#59191,.F.); +#59439 = ORIENTED_EDGE('',*,*,#59249,.T.); +#59440 = ORIENTED_EDGE('',*,*,#59214,.F.); +#59441 = ORIENTED_EDGE('',*,*,#59390,.F.); +#59442 = ORIENTED_EDGE('',*,*,#59443,.T.); +#59443 = EDGE_CURVE('',#59391,#59444,#59446,.T.); +#59444 = VERTEX_POINT('',#59445); +#59445 = CARTESIAN_POINT('',(-9.,-0.27,0.8)); +#59446 = LINE('',#59447,#59448); +#59447 = CARTESIAN_POINT('',(-9.,0.63,0.8)); +#59448 = VECTOR('',#59449,1.); +#59449 = DIRECTION('',(0.,-1.,0.)); +#59450 = ORIENTED_EDGE('',*,*,#59451,.F.); +#59451 = EDGE_CURVE('',#59417,#59444,#59452,.T.); +#59452 = LINE('',#59453,#59454); +#59453 = CARTESIAN_POINT('',(-8.55,-0.27,0.8)); +#59454 = VECTOR('',#59455,1.); +#59455 = DIRECTION('',(-1.,0.,0.)); +#59456 = ORIENTED_EDGE('',*,*,#59416,.F.); +#59457 = PLANE('',#59458); +#59458 = AXIS2_PLACEMENT_3D('',#59459,#59460,#59461); +#59459 = CARTESIAN_POINT('',(-8.775,0.18,0.8)); +#59460 = DIRECTION('',(0.,0.,1.)); +#59461 = DIRECTION('',(1.,0.,-0.)); +#59462 = ADVANCED_FACE('',(#59463),#59469,.T.); +#59463 = FACE_BOUND('',#59464,.T.); +#59464 = EDGE_LOOP('',(#59465,#59466,#59467,#59468)); +#59465 = ORIENTED_EDGE('',*,*,#59273,.T.); +#59466 = ORIENTED_EDGE('',*,*,#59321,.T.); +#59467 = ORIENTED_EDGE('',*,*,#59297,.F.); +#59468 = ORIENTED_EDGE('',*,*,#59336,.F.); +#59469 = PLANE('',#59470); +#59470 = AXIS2_PLACEMENT_3D('',#59471,#59472,#59473); +#59471 = CARTESIAN_POINT('',(-8.55,-0.27,0.)); +#59472 = DIRECTION('',(0.,-1.,0.)); +#59473 = DIRECTION('',(0.,0.,1.)); +#59474 = ADVANCED_FACE('',(#59475),#59486,.T.); +#59475 = FACE_BOUND('',#59476,.T.); +#59476 = EDGE_LOOP('',(#59477,#59478,#59479,#59485)); +#59477 = ORIENTED_EDGE('',*,*,#59424,.T.); +#59478 = ORIENTED_EDGE('',*,*,#59451,.T.); +#59479 = ORIENTED_EDGE('',*,*,#59480,.F.); +#59480 = EDGE_CURVE('',#59343,#59444,#59481,.T.); +#59481 = LINE('',#59482,#59483); +#59482 = CARTESIAN_POINT('',(-9.,-0.27,0.4)); +#59483 = VECTOR('',#59484,1.); +#59484 = DIRECTION('',(0.,0.,1.)); +#59485 = ORIENTED_EDGE('',*,*,#59342,.F.); +#59486 = PLANE('',#59487); +#59487 = AXIS2_PLACEMENT_3D('',#59488,#59489,#59490); +#59488 = CARTESIAN_POINT('',(-8.55,-0.27,0.4)); +#59489 = DIRECTION('',(0.,-1.,0.)); +#59490 = DIRECTION('',(-1.,0.,0.)); +#59491 = ADVANCED_FACE('',(#59492),#59498,.F.); +#59492 = FACE_BOUND('',#59493,.F.); +#59493 = EDGE_LOOP('',(#59494,#59495,#59496,#59497)); +#59494 = ORIENTED_EDGE('',*,*,#59374,.F.); +#59495 = ORIENTED_EDGE('',*,*,#59399,.T.); +#59496 = ORIENTED_EDGE('',*,*,#59443,.T.); +#59497 = ORIENTED_EDGE('',*,*,#59480,.F.); +#59498 = PLANE('',#59499); +#59499 = AXIS2_PLACEMENT_3D('',#59500,#59501,#59502); +#59500 = CARTESIAN_POINT('',(-9.,0.63,0.4)); +#59501 = DIRECTION('',(1.,0.,0.)); +#59502 = DIRECTION('',(0.,-1.,0.)); +#59503 = MANIFOLD_SOLID_BREP('',#59504); +#59504 = CLOSED_SHELL('',(#59505,#59545,#59576,#59607,#59657,#59688, + #59721,#59738,#59762,#59793,#59810,#59839,#59863,#59889,#59913, + #59940,#59952,#59969)); +#59505 = ADVANCED_FACE('',(#59506),#59540,.T.); +#59506 = FACE_BOUND('',#59507,.T.); +#59507 = EDGE_LOOP('',(#59508,#59518,#59526,#59534)); +#59508 = ORIENTED_EDGE('',*,*,#59509,.T.); +#59509 = EDGE_CURVE('',#59510,#59512,#59514,.T.); +#59510 = VERTEX_POINT('',#59511); +#59511 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59512 = VERTEX_POINT('',#59513); +#59513 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59514 = LINE('',#59515,#59516); +#59515 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59516 = VECTOR('',#59517,1.); +#59517 = DIRECTION('',(0.,0.,1.)); +#59518 = ORIENTED_EDGE('',*,*,#59519,.T.); +#59519 = EDGE_CURVE('',#59512,#59520,#59522,.T.); +#59520 = VERTEX_POINT('',#59521); +#59521 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59522 = LINE('',#59523,#59524); +#59523 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59524 = VECTOR('',#59525,1.); +#59525 = DIRECTION('',(1.,0.,0.)); +#59526 = ORIENTED_EDGE('',*,*,#59527,.F.); +#59527 = EDGE_CURVE('',#59528,#59520,#59530,.T.); +#59528 = VERTEX_POINT('',#59529); +#59529 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59530 = LINE('',#59531,#59532); +#59531 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59532 = VECTOR('',#59533,1.); +#59533 = DIRECTION('',(0.,0.,1.)); +#59534 = ORIENTED_EDGE('',*,*,#59535,.F.); +#59535 = EDGE_CURVE('',#59510,#59528,#59536,.T.); +#59536 = LINE('',#59537,#59538); +#59537 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59538 = VECTOR('',#59539,1.); +#59539 = DIRECTION('',(1.,0.,0.)); +#59540 = PLANE('',#59541); +#59541 = AXIS2_PLACEMENT_3D('',#59542,#59543,#59544); +#59542 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59543 = DIRECTION('',(0.,1.,0.)); +#59544 = DIRECTION('',(1.,0.,0.)); +#59545 = ADVANCED_FACE('',(#59546),#59571,.F.); +#59546 = FACE_BOUND('',#59547,.F.); +#59547 = EDGE_LOOP('',(#59548,#59556,#59557,#59565)); +#59548 = ORIENTED_EDGE('',*,*,#59549,.F.); +#59549 = EDGE_CURVE('',#59510,#59550,#59552,.T.); +#59550 = VERTEX_POINT('',#59551); +#59551 = CARTESIAN_POINT('',(-9.,-0.815,0.)); +#59552 = LINE('',#59553,#59554); +#59553 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59554 = VECTOR('',#59555,1.); +#59555 = DIRECTION('',(0.,-1.,0.)); +#59556 = ORIENTED_EDGE('',*,*,#59509,.T.); +#59557 = ORIENTED_EDGE('',*,*,#59558,.T.); +#59558 = EDGE_CURVE('',#59512,#59559,#59561,.T.); +#59559 = VERTEX_POINT('',#59560); +#59560 = CARTESIAN_POINT('',(-9.,-0.815,0.4)); +#59561 = LINE('',#59562,#59563); +#59562 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59563 = VECTOR('',#59564,1.); +#59564 = DIRECTION('',(0.,-1.,0.)); +#59565 = ORIENTED_EDGE('',*,*,#59566,.F.); +#59566 = EDGE_CURVE('',#59550,#59559,#59567,.T.); +#59567 = LINE('',#59568,#59569); +#59568 = CARTESIAN_POINT('',(-9.,-0.815,0.8)); +#59569 = VECTOR('',#59570,1.); +#59570 = DIRECTION('',(0.,0.,1.)); +#59571 = PLANE('',#59572); +#59572 = AXIS2_PLACEMENT_3D('',#59573,#59574,#59575); +#59573 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59574 = DIRECTION('',(1.,0.,0.)); +#59575 = DIRECTION('',(0.,-1.,0.)); +#59576 = ADVANCED_FACE('',(#59577),#59602,.F.); +#59577 = FACE_BOUND('',#59578,.F.); +#59578 = EDGE_LOOP('',(#59579,#59587,#59595,#59601)); +#59579 = ORIENTED_EDGE('',*,*,#59580,.T.); +#59580 = EDGE_CURVE('',#59528,#59581,#59583,.T.); +#59581 = VERTEX_POINT('',#59582); +#59582 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#59583 = LINE('',#59584,#59585); +#59584 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59585 = VECTOR('',#59586,1.); +#59586 = DIRECTION('',(1.,0.,0.)); +#59587 = ORIENTED_EDGE('',*,*,#59588,.T.); +#59588 = EDGE_CURVE('',#59581,#59589,#59591,.T.); +#59589 = VERTEX_POINT('',#59590); +#59590 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#59591 = LINE('',#59592,#59593); +#59592 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#59593 = VECTOR('',#59594,1.); +#59594 = DIRECTION('',(0.,0.,1.)); +#59595 = ORIENTED_EDGE('',*,*,#59596,.F.); +#59596 = EDGE_CURVE('',#59520,#59589,#59597,.T.); +#59597 = LINE('',#59598,#59599); +#59598 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59599 = VECTOR('',#59600,1.); +#59600 = DIRECTION('',(1.,0.,0.)); +#59601 = ORIENTED_EDGE('',*,*,#59527,.F.); +#59602 = PLANE('',#59603); +#59603 = AXIS2_PLACEMENT_3D('',#59604,#59605,#59606); +#59604 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59605 = DIRECTION('',(0.,-1.,0.)); +#59606 = DIRECTION('',(0.,0.,1.)); +#59607 = ADVANCED_FACE('',(#59608),#59652,.F.); +#59608 = FACE_BOUND('',#59609,.F.); +#59609 = EDGE_LOOP('',(#59610,#59611,#59612,#59621,#59630,#59638,#59646) + ); +#59610 = ORIENTED_EDGE('',*,*,#59535,.F.); +#59611 = ORIENTED_EDGE('',*,*,#59549,.T.); +#59612 = ORIENTED_EDGE('',*,*,#59613,.F.); +#59613 = EDGE_CURVE('',#59614,#59550,#59616,.T.); +#59614 = VERTEX_POINT('',#59615); +#59615 = CARTESIAN_POINT('',(-8.725,-1.09,0.)); +#59616 = CIRCLE('',#59617,0.275); +#59617 = AXIS2_PLACEMENT_3D('',#59618,#59619,#59620); +#59618 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#59619 = DIRECTION('',(0.,0.,1.)); +#59620 = DIRECTION('',(1.,0.,-0.)); +#59621 = ORIENTED_EDGE('',*,*,#59622,.F.); +#59622 = EDGE_CURVE('',#59623,#59614,#59625,.T.); +#59623 = VERTEX_POINT('',#59624); +#59624 = CARTESIAN_POINT('',(-9.,-1.365,0.)); +#59625 = CIRCLE('',#59626,0.275); +#59626 = AXIS2_PLACEMENT_3D('',#59627,#59628,#59629); +#59627 = CARTESIAN_POINT('',(-9.,-1.09,0.)); +#59628 = DIRECTION('',(0.,0.,1.)); +#59629 = DIRECTION('',(1.,0.,-0.)); +#59630 = ORIENTED_EDGE('',*,*,#59631,.T.); +#59631 = EDGE_CURVE('',#59623,#59632,#59634,.T.); +#59632 = VERTEX_POINT('',#59633); +#59633 = CARTESIAN_POINT('',(-9.,-1.54,0.)); +#59634 = LINE('',#59635,#59636); +#59635 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59636 = VECTOR('',#59637,1.); +#59637 = DIRECTION('',(0.,-1.,0.)); +#59638 = ORIENTED_EDGE('',*,*,#59639,.F.); +#59639 = EDGE_CURVE('',#59640,#59632,#59642,.T.); +#59640 = VERTEX_POINT('',#59641); +#59641 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59642 = LINE('',#59643,#59644); +#59643 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59644 = VECTOR('',#59645,1.); +#59645 = DIRECTION('',(-1.,0.,0.)); +#59646 = ORIENTED_EDGE('',*,*,#59647,.F.); +#59647 = EDGE_CURVE('',#59528,#59640,#59648,.T.); +#59648 = LINE('',#59649,#59650); +#59649 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59650 = VECTOR('',#59651,1.); +#59651 = DIRECTION('',(0.,-1.,0.)); +#59652 = PLANE('',#59653); +#59653 = AXIS2_PLACEMENT_3D('',#59654,#59655,#59656); +#59654 = CARTESIAN_POINT('',(-8.775,-1.09,0.)); +#59655 = DIRECTION('',(0.,0.,1.)); +#59656 = DIRECTION('',(1.,0.,-0.)); +#59657 = ADVANCED_FACE('',(#59658),#59683,.T.); +#59658 = FACE_BOUND('',#59659,.T.); +#59659 = EDGE_LOOP('',(#59660,#59668,#59676,#59682)); +#59660 = ORIENTED_EDGE('',*,*,#59661,.T.); +#59661 = EDGE_CURVE('',#59512,#59662,#59664,.T.); +#59662 = VERTEX_POINT('',#59663); +#59663 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#59664 = LINE('',#59665,#59666); +#59665 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59666 = VECTOR('',#59667,1.); +#59667 = DIRECTION('',(0.,0.,1.)); +#59668 = ORIENTED_EDGE('',*,*,#59669,.T.); +#59669 = EDGE_CURVE('',#59662,#59670,#59672,.T.); +#59670 = VERTEX_POINT('',#59671); +#59671 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#59672 = LINE('',#59673,#59674); +#59673 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#59674 = VECTOR('',#59675,1.); +#59675 = DIRECTION('',(1.,0.,0.)); +#59676 = ORIENTED_EDGE('',*,*,#59677,.F.); +#59677 = EDGE_CURVE('',#59520,#59670,#59678,.T.); +#59678 = LINE('',#59679,#59680); +#59679 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59680 = VECTOR('',#59681,1.); +#59681 = DIRECTION('',(0.,0.,1.)); +#59682 = ORIENTED_EDGE('',*,*,#59519,.F.); +#59683 = PLANE('',#59684); +#59684 = AXIS2_PLACEMENT_3D('',#59685,#59686,#59687); +#59685 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59686 = DIRECTION('',(0.,1.,0.)); +#59687 = DIRECTION('',(1.,0.,0.)); +#59688 = ADVANCED_FACE('',(#59689),#59716,.F.); +#59689 = FACE_BOUND('',#59690,.F.); +#59690 = EDGE_LOOP('',(#59691,#59702,#59708,#59709,#59710)); +#59691 = ORIENTED_EDGE('',*,*,#59692,.F.); +#59692 = EDGE_CURVE('',#59693,#59695,#59697,.T.); +#59693 = VERTEX_POINT('',#59694); +#59694 = CARTESIAN_POINT('',(-8.725,-1.09,0.8)); +#59695 = VERTEX_POINT('',#59696); +#59696 = CARTESIAN_POINT('',(-9.,-0.815,0.8)); +#59697 = CIRCLE('',#59698,0.275); +#59698 = AXIS2_PLACEMENT_3D('',#59699,#59700,#59701); +#59699 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#59700 = DIRECTION('',(0.,0.,1.)); +#59701 = DIRECTION('',(1.,0.,-0.)); +#59702 = ORIENTED_EDGE('',*,*,#59703,.T.); +#59703 = EDGE_CURVE('',#59693,#59614,#59704,.T.); +#59704 = LINE('',#59705,#59706); +#59705 = CARTESIAN_POINT('',(-8.725,-1.09,0.8)); +#59706 = VECTOR('',#59707,1.); +#59707 = DIRECTION('',(-0.,-0.,-1.)); +#59708 = ORIENTED_EDGE('',*,*,#59613,.T.); +#59709 = ORIENTED_EDGE('',*,*,#59566,.T.); +#59710 = ORIENTED_EDGE('',*,*,#59711,.T.); +#59711 = EDGE_CURVE('',#59559,#59695,#59712,.T.); +#59712 = LINE('',#59713,#59714); +#59713 = CARTESIAN_POINT('',(-9.,-0.815,0.8)); +#59714 = VECTOR('',#59715,1.); +#59715 = DIRECTION('',(0.,0.,1.)); +#59716 = CYLINDRICAL_SURFACE('',#59717,0.275); +#59717 = AXIS2_PLACEMENT_3D('',#59718,#59719,#59720); +#59718 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#59719 = DIRECTION('',(0.,0.,1.)); +#59720 = DIRECTION('',(1.,0.,-0.)); +#59721 = ADVANCED_FACE('',(#59722),#59733,.F.); +#59722 = FACE_BOUND('',#59723,.F.); +#59723 = EDGE_LOOP('',(#59724,#59725,#59726,#59732)); +#59724 = ORIENTED_EDGE('',*,*,#59558,.F.); +#59725 = ORIENTED_EDGE('',*,*,#59661,.T.); +#59726 = ORIENTED_EDGE('',*,*,#59727,.T.); +#59727 = EDGE_CURVE('',#59662,#59695,#59728,.T.); +#59728 = LINE('',#59729,#59730); +#59729 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#59730 = VECTOR('',#59731,1.); +#59731 = DIRECTION('',(0.,-1.,0.)); +#59732 = ORIENTED_EDGE('',*,*,#59711,.F.); +#59733 = PLANE('',#59734); +#59734 = AXIS2_PLACEMENT_3D('',#59735,#59736,#59737); +#59735 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59736 = DIRECTION('',(1.,0.,0.)); +#59737 = DIRECTION('',(0.,-1.,0.)); +#59738 = ADVANCED_FACE('',(#59739),#59757,.T.); +#59739 = FACE_BOUND('',#59740,.T.); +#59740 = EDGE_LOOP('',(#59741,#59742,#59750,#59756)); +#59741 = ORIENTED_EDGE('',*,*,#59580,.T.); +#59742 = ORIENTED_EDGE('',*,*,#59743,.T.); +#59743 = EDGE_CURVE('',#59581,#59744,#59746,.T.); +#59744 = VERTEX_POINT('',#59745); +#59745 = CARTESIAN_POINT('',(-8.15,-1.54,0.)); +#59746 = LINE('',#59747,#59748); +#59747 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#59748 = VECTOR('',#59749,1.); +#59749 = DIRECTION('',(0.,-1.,0.)); +#59750 = ORIENTED_EDGE('',*,*,#59751,.F.); +#59751 = EDGE_CURVE('',#59640,#59744,#59752,.T.); +#59752 = LINE('',#59753,#59754); +#59753 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59754 = VECTOR('',#59755,1.); +#59755 = DIRECTION('',(1.,0.,0.)); +#59756 = ORIENTED_EDGE('',*,*,#59647,.F.); +#59757 = PLANE('',#59758); +#59758 = AXIS2_PLACEMENT_3D('',#59759,#59760,#59761); +#59759 = CARTESIAN_POINT('',(-8.55,-0.64,0.)); +#59760 = DIRECTION('',(0.,0.,-1.)); +#59761 = DIRECTION('',(0.,-1.,0.)); +#59762 = ADVANCED_FACE('',(#59763),#59788,.F.); +#59763 = FACE_BOUND('',#59764,.F.); +#59764 = EDGE_LOOP('',(#59765,#59766,#59774,#59782)); +#59765 = ORIENTED_EDGE('',*,*,#59596,.T.); +#59766 = ORIENTED_EDGE('',*,*,#59767,.T.); +#59767 = EDGE_CURVE('',#59589,#59768,#59770,.T.); +#59768 = VERTEX_POINT('',#59769); +#59769 = CARTESIAN_POINT('',(-8.15,-1.54,0.4)); +#59770 = LINE('',#59771,#59772); +#59771 = CARTESIAN_POINT('',(-8.15,-0.64,0.4)); +#59772 = VECTOR('',#59773,1.); +#59773 = DIRECTION('',(0.,-1.,0.)); +#59774 = ORIENTED_EDGE('',*,*,#59775,.F.); +#59775 = EDGE_CURVE('',#59776,#59768,#59778,.T.); +#59776 = VERTEX_POINT('',#59777); +#59777 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#59778 = LINE('',#59779,#59780); +#59779 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#59780 = VECTOR('',#59781,1.); +#59781 = DIRECTION('',(1.,0.,0.)); +#59782 = ORIENTED_EDGE('',*,*,#59783,.F.); +#59783 = EDGE_CURVE('',#59520,#59776,#59784,.T.); +#59784 = LINE('',#59785,#59786); +#59785 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59786 = VECTOR('',#59787,1.); +#59787 = DIRECTION('',(0.,-1.,0.)); +#59788 = PLANE('',#59789); +#59789 = AXIS2_PLACEMENT_3D('',#59790,#59791,#59792); +#59790 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59791 = DIRECTION('',(0.,0.,-1.)); +#59792 = DIRECTION('',(0.,-1.,0.)); +#59793 = ADVANCED_FACE('',(#59794),#59805,.T.); +#59794 = FACE_BOUND('',#59795,.T.); +#59795 = EDGE_LOOP('',(#59796,#59797,#59798,#59804)); +#59796 = ORIENTED_EDGE('',*,*,#59588,.T.); +#59797 = ORIENTED_EDGE('',*,*,#59767,.T.); +#59798 = ORIENTED_EDGE('',*,*,#59799,.F.); +#59799 = EDGE_CURVE('',#59744,#59768,#59800,.T.); +#59800 = LINE('',#59801,#59802); +#59801 = CARTESIAN_POINT('',(-8.15,-1.54,0.)); +#59802 = VECTOR('',#59803,1.); +#59803 = DIRECTION('',(0.,0.,1.)); +#59804 = ORIENTED_EDGE('',*,*,#59743,.F.); +#59805 = PLANE('',#59806); +#59806 = AXIS2_PLACEMENT_3D('',#59807,#59808,#59809); +#59807 = CARTESIAN_POINT('',(-8.15,-0.64,0.)); +#59808 = DIRECTION('',(1.,0.,0.)); +#59809 = DIRECTION('',(0.,-1.,0.)); +#59810 = ADVANCED_FACE('',(#59811),#59834,.T.); +#59811 = FACE_BOUND('',#59812,.T.); +#59812 = EDGE_LOOP('',(#59813,#59819,#59827,#59833)); +#59813 = ORIENTED_EDGE('',*,*,#59814,.T.); +#59814 = EDGE_CURVE('',#59640,#59776,#59815,.T.); +#59815 = LINE('',#59816,#59817); +#59816 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59817 = VECTOR('',#59818,1.); +#59818 = DIRECTION('',(0.,0.,1.)); +#59819 = ORIENTED_EDGE('',*,*,#59820,.T.); +#59820 = EDGE_CURVE('',#59776,#59821,#59823,.T.); +#59821 = VERTEX_POINT('',#59822); +#59822 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#59823 = LINE('',#59824,#59825); +#59824 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#59825 = VECTOR('',#59826,1.); +#59826 = DIRECTION('',(-1.,0.,0.)); +#59827 = ORIENTED_EDGE('',*,*,#59828,.F.); +#59828 = EDGE_CURVE('',#59632,#59821,#59829,.T.); +#59829 = LINE('',#59830,#59831); +#59830 = CARTESIAN_POINT('',(-9.,-1.54,0.)); +#59831 = VECTOR('',#59832,1.); +#59832 = DIRECTION('',(0.,0.,1.)); +#59833 = ORIENTED_EDGE('',*,*,#59639,.F.); +#59834 = PLANE('',#59835); +#59835 = AXIS2_PLACEMENT_3D('',#59836,#59837,#59838); +#59836 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59837 = DIRECTION('',(0.,-1.,0.)); +#59838 = DIRECTION('',(-1.,0.,0.)); +#59839 = ADVANCED_FACE('',(#59840),#59858,.F.); +#59840 = FACE_BOUND('',#59841,.F.); +#59841 = EDGE_LOOP('',(#59842,#59843,#59851,#59857)); +#59842 = ORIENTED_EDGE('',*,*,#59631,.F.); +#59843 = ORIENTED_EDGE('',*,*,#59844,.T.); +#59844 = EDGE_CURVE('',#59623,#59845,#59847,.T.); +#59845 = VERTEX_POINT('',#59846); +#59846 = CARTESIAN_POINT('',(-9.,-1.365,0.4)); +#59847 = LINE('',#59848,#59849); +#59848 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#59849 = VECTOR('',#59850,1.); +#59850 = DIRECTION('',(0.,0.,1.)); +#59851 = ORIENTED_EDGE('',*,*,#59852,.T.); +#59852 = EDGE_CURVE('',#59845,#59821,#59853,.T.); +#59853 = LINE('',#59854,#59855); +#59854 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59855 = VECTOR('',#59856,1.); +#59856 = DIRECTION('',(0.,-1.,0.)); +#59857 = ORIENTED_EDGE('',*,*,#59828,.F.); +#59858 = PLANE('',#59859); +#59859 = AXIS2_PLACEMENT_3D('',#59860,#59861,#59862); +#59860 = CARTESIAN_POINT('',(-9.,-0.64,0.)); +#59861 = DIRECTION('',(1.,0.,0.)); +#59862 = DIRECTION('',(0.,-1.,0.)); +#59863 = ADVANCED_FACE('',(#59864),#59884,.F.); +#59864 = FACE_BOUND('',#59865,.F.); +#59865 = EDGE_LOOP('',(#59866,#59867,#59876,#59882,#59883)); +#59866 = ORIENTED_EDGE('',*,*,#59703,.F.); +#59867 = ORIENTED_EDGE('',*,*,#59868,.F.); +#59868 = EDGE_CURVE('',#59869,#59693,#59871,.T.); +#59869 = VERTEX_POINT('',#59870); +#59870 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#59871 = CIRCLE('',#59872,0.275); +#59872 = AXIS2_PLACEMENT_3D('',#59873,#59874,#59875); +#59873 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#59874 = DIRECTION('',(0.,0.,1.)); +#59875 = DIRECTION('',(1.,0.,-0.)); +#59876 = ORIENTED_EDGE('',*,*,#59877,.F.); +#59877 = EDGE_CURVE('',#59845,#59869,#59878,.T.); +#59878 = LINE('',#59879,#59880); +#59879 = CARTESIAN_POINT('',(-9.,-1.365,0.8)); +#59880 = VECTOR('',#59881,1.); +#59881 = DIRECTION('',(0.,0.,1.)); +#59882 = ORIENTED_EDGE('',*,*,#59844,.F.); +#59883 = ORIENTED_EDGE('',*,*,#59622,.T.); +#59884 = CYLINDRICAL_SURFACE('',#59885,0.275); +#59885 = AXIS2_PLACEMENT_3D('',#59886,#59887,#59888); +#59886 = CARTESIAN_POINT('',(-9.,-1.09,0.8)); +#59887 = DIRECTION('',(0.,0.,1.)); +#59888 = DIRECTION('',(1.,0.,-0.)); +#59889 = ADVANCED_FACE('',(#59890),#59908,.T.); +#59890 = FACE_BOUND('',#59891,.T.); +#59891 = EDGE_LOOP('',(#59892,#59893,#59901,#59907)); +#59892 = ORIENTED_EDGE('',*,*,#59677,.T.); +#59893 = ORIENTED_EDGE('',*,*,#59894,.T.); +#59894 = EDGE_CURVE('',#59670,#59895,#59897,.T.); +#59895 = VERTEX_POINT('',#59896); +#59896 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#59897 = LINE('',#59898,#59899); +#59898 = CARTESIAN_POINT('',(-8.55,-0.64,0.8)); +#59899 = VECTOR('',#59900,1.); +#59900 = DIRECTION('',(0.,-1.,0.)); +#59901 = ORIENTED_EDGE('',*,*,#59902,.F.); +#59902 = EDGE_CURVE('',#59776,#59895,#59903,.T.); +#59903 = LINE('',#59904,#59905); +#59904 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#59905 = VECTOR('',#59906,1.); +#59906 = DIRECTION('',(0.,0.,1.)); +#59907 = ORIENTED_EDGE('',*,*,#59783,.F.); +#59908 = PLANE('',#59909); +#59909 = AXIS2_PLACEMENT_3D('',#59910,#59911,#59912); +#59910 = CARTESIAN_POINT('',(-8.55,-0.64,0.4)); +#59911 = DIRECTION('',(1.,0.,0.)); +#59912 = DIRECTION('',(0.,-1.,0.)); +#59913 = ADVANCED_FACE('',(#59914),#59935,.T.); +#59914 = FACE_BOUND('',#59915,.T.); +#59915 = EDGE_LOOP('',(#59916,#59917,#59918,#59919,#59920,#59928,#59934) + ); +#59916 = ORIENTED_EDGE('',*,*,#59669,.F.); +#59917 = ORIENTED_EDGE('',*,*,#59727,.T.); +#59918 = ORIENTED_EDGE('',*,*,#59692,.F.); +#59919 = ORIENTED_EDGE('',*,*,#59868,.F.); +#59920 = ORIENTED_EDGE('',*,*,#59921,.T.); +#59921 = EDGE_CURVE('',#59869,#59922,#59924,.T.); +#59922 = VERTEX_POINT('',#59923); +#59923 = CARTESIAN_POINT('',(-9.,-1.54,0.8)); +#59924 = LINE('',#59925,#59926); +#59925 = CARTESIAN_POINT('',(-9.,-0.64,0.8)); +#59926 = VECTOR('',#59927,1.); +#59927 = DIRECTION('',(0.,-1.,0.)); +#59928 = ORIENTED_EDGE('',*,*,#59929,.F.); +#59929 = EDGE_CURVE('',#59895,#59922,#59930,.T.); +#59930 = LINE('',#59931,#59932); +#59931 = CARTESIAN_POINT('',(-8.55,-1.54,0.8)); +#59932 = VECTOR('',#59933,1.); +#59933 = DIRECTION('',(-1.,0.,0.)); +#59934 = ORIENTED_EDGE('',*,*,#59894,.F.); +#59935 = PLANE('',#59936); +#59936 = AXIS2_PLACEMENT_3D('',#59937,#59938,#59939); +#59937 = CARTESIAN_POINT('',(-8.775,-1.09,0.8)); +#59938 = DIRECTION('',(0.,0.,1.)); +#59939 = DIRECTION('',(1.,0.,-0.)); +#59940 = ADVANCED_FACE('',(#59941),#59947,.T.); +#59941 = FACE_BOUND('',#59942,.T.); +#59942 = EDGE_LOOP('',(#59943,#59944,#59945,#59946)); +#59943 = ORIENTED_EDGE('',*,*,#59751,.T.); +#59944 = ORIENTED_EDGE('',*,*,#59799,.T.); +#59945 = ORIENTED_EDGE('',*,*,#59775,.F.); +#59946 = ORIENTED_EDGE('',*,*,#59814,.F.); +#59947 = PLANE('',#59948); +#59948 = AXIS2_PLACEMENT_3D('',#59949,#59950,#59951); +#59949 = CARTESIAN_POINT('',(-8.55,-1.54,0.)); +#59950 = DIRECTION('',(0.,-1.,0.)); +#59951 = DIRECTION('',(0.,0.,1.)); +#59952 = ADVANCED_FACE('',(#59953),#59964,.T.); +#59953 = FACE_BOUND('',#59954,.T.); +#59954 = EDGE_LOOP('',(#59955,#59956,#59957,#59963)); +#59955 = ORIENTED_EDGE('',*,*,#59902,.T.); +#59956 = ORIENTED_EDGE('',*,*,#59929,.T.); +#59957 = ORIENTED_EDGE('',*,*,#59958,.F.); +#59958 = EDGE_CURVE('',#59821,#59922,#59959,.T.); +#59959 = LINE('',#59960,#59961); +#59960 = CARTESIAN_POINT('',(-9.,-1.54,0.4)); +#59961 = VECTOR('',#59962,1.); +#59962 = DIRECTION('',(0.,0.,1.)); +#59963 = ORIENTED_EDGE('',*,*,#59820,.F.); +#59964 = PLANE('',#59965); +#59965 = AXIS2_PLACEMENT_3D('',#59966,#59967,#59968); +#59966 = CARTESIAN_POINT('',(-8.55,-1.54,0.4)); +#59967 = DIRECTION('',(0.,-1.,0.)); +#59968 = DIRECTION('',(-1.,0.,0.)); +#59969 = ADVANCED_FACE('',(#59970),#59976,.F.); +#59970 = FACE_BOUND('',#59971,.F.); +#59971 = EDGE_LOOP('',(#59972,#59973,#59974,#59975)); +#59972 = ORIENTED_EDGE('',*,*,#59852,.F.); +#59973 = ORIENTED_EDGE('',*,*,#59877,.T.); +#59974 = ORIENTED_EDGE('',*,*,#59921,.T.); +#59975 = ORIENTED_EDGE('',*,*,#59958,.F.); +#59976 = PLANE('',#59977); +#59977 = AXIS2_PLACEMENT_3D('',#59978,#59979,#59980); +#59978 = CARTESIAN_POINT('',(-9.,-0.64,0.4)); +#59979 = DIRECTION('',(1.,0.,0.)); +#59980 = DIRECTION('',(0.,-1.,0.)); +#59981 = MANIFOLD_SOLID_BREP('',#59982); +#59982 = CLOSED_SHELL('',(#59983,#60023,#60054,#60085,#60135,#60166, + #60199,#60216,#60240,#60271,#60288,#60317,#60341,#60367,#60391, + #60418,#60430,#60447)); +#59983 = ADVANCED_FACE('',(#59984),#60018,.T.); +#59984 = FACE_BOUND('',#59985,.T.); +#59985 = EDGE_LOOP('',(#59986,#59996,#60004,#60012)); +#59986 = ORIENTED_EDGE('',*,*,#59987,.T.); +#59987 = EDGE_CURVE('',#59988,#59990,#59992,.T.); +#59988 = VERTEX_POINT('',#59989); +#59989 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#59990 = VERTEX_POINT('',#59991); +#59991 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#59992 = LINE('',#59993,#59994); +#59993 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#59994 = VECTOR('',#59995,1.); +#59995 = DIRECTION('',(0.,0.,1.)); +#59996 = ORIENTED_EDGE('',*,*,#59997,.T.); +#59997 = EDGE_CURVE('',#59990,#59998,#60000,.T.); +#59998 = VERTEX_POINT('',#59999); +#59999 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60000 = LINE('',#60001,#60002); +#60001 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60002 = VECTOR('',#60003,1.); +#60003 = DIRECTION('',(1.,0.,0.)); +#60004 = ORIENTED_EDGE('',*,*,#60005,.F.); +#60005 = EDGE_CURVE('',#60006,#59998,#60008,.T.); +#60006 = VERTEX_POINT('',#60007); +#60007 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60008 = LINE('',#60009,#60010); +#60009 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60010 = VECTOR('',#60011,1.); +#60011 = DIRECTION('',(0.,0.,1.)); +#60012 = ORIENTED_EDGE('',*,*,#60013,.F.); +#60013 = EDGE_CURVE('',#59988,#60006,#60014,.T.); +#60014 = LINE('',#60015,#60016); +#60015 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60016 = VECTOR('',#60017,1.); +#60017 = DIRECTION('',(1.,0.,0.)); +#60018 = PLANE('',#60019); +#60019 = AXIS2_PLACEMENT_3D('',#60020,#60021,#60022); +#60020 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60021 = DIRECTION('',(0.,1.,0.)); +#60022 = DIRECTION('',(1.,0.,0.)); +#60023 = ADVANCED_FACE('',(#60024),#60049,.F.); +#60024 = FACE_BOUND('',#60025,.F.); +#60025 = EDGE_LOOP('',(#60026,#60034,#60035,#60043)); +#60026 = ORIENTED_EDGE('',*,*,#60027,.F.); +#60027 = EDGE_CURVE('',#59988,#60028,#60030,.T.); +#60028 = VERTEX_POINT('',#60029); +#60029 = CARTESIAN_POINT('',(-9.,-2.085,0.)); +#60030 = LINE('',#60031,#60032); +#60031 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60032 = VECTOR('',#60033,1.); +#60033 = DIRECTION('',(0.,-1.,0.)); +#60034 = ORIENTED_EDGE('',*,*,#59987,.T.); +#60035 = ORIENTED_EDGE('',*,*,#60036,.T.); +#60036 = EDGE_CURVE('',#59990,#60037,#60039,.T.); +#60037 = VERTEX_POINT('',#60038); +#60038 = CARTESIAN_POINT('',(-9.,-2.085,0.4)); +#60039 = LINE('',#60040,#60041); +#60040 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60041 = VECTOR('',#60042,1.); +#60042 = DIRECTION('',(0.,-1.,0.)); +#60043 = ORIENTED_EDGE('',*,*,#60044,.F.); +#60044 = EDGE_CURVE('',#60028,#60037,#60045,.T.); +#60045 = LINE('',#60046,#60047); +#60046 = CARTESIAN_POINT('',(-9.,-2.085,0.8)); +#60047 = VECTOR('',#60048,1.); +#60048 = DIRECTION('',(0.,0.,1.)); +#60049 = PLANE('',#60050); +#60050 = AXIS2_PLACEMENT_3D('',#60051,#60052,#60053); +#60051 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60052 = DIRECTION('',(1.,0.,0.)); +#60053 = DIRECTION('',(0.,-1.,0.)); +#60054 = ADVANCED_FACE('',(#60055),#60080,.F.); +#60055 = FACE_BOUND('',#60056,.F.); +#60056 = EDGE_LOOP('',(#60057,#60065,#60073,#60079)); +#60057 = ORIENTED_EDGE('',*,*,#60058,.T.); +#60058 = EDGE_CURVE('',#60006,#60059,#60061,.T.); +#60059 = VERTEX_POINT('',#60060); +#60060 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#60061 = LINE('',#60062,#60063); +#60062 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60063 = VECTOR('',#60064,1.); +#60064 = DIRECTION('',(1.,0.,0.)); +#60065 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60066 = EDGE_CURVE('',#60059,#60067,#60069,.T.); +#60067 = VERTEX_POINT('',#60068); +#60068 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#60069 = LINE('',#60070,#60071); +#60070 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#60071 = VECTOR('',#60072,1.); +#60072 = DIRECTION('',(0.,0.,1.)); +#60073 = ORIENTED_EDGE('',*,*,#60074,.F.); +#60074 = EDGE_CURVE('',#59998,#60067,#60075,.T.); +#60075 = LINE('',#60076,#60077); +#60076 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60077 = VECTOR('',#60078,1.); +#60078 = DIRECTION('',(1.,0.,0.)); +#60079 = ORIENTED_EDGE('',*,*,#60005,.F.); +#60080 = PLANE('',#60081); +#60081 = AXIS2_PLACEMENT_3D('',#60082,#60083,#60084); +#60082 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60083 = DIRECTION('',(0.,-1.,0.)); +#60084 = DIRECTION('',(0.,0.,1.)); +#60085 = ADVANCED_FACE('',(#60086),#60130,.F.); +#60086 = FACE_BOUND('',#60087,.F.); +#60087 = EDGE_LOOP('',(#60088,#60089,#60090,#60099,#60108,#60116,#60124) + ); +#60088 = ORIENTED_EDGE('',*,*,#60013,.F.); +#60089 = ORIENTED_EDGE('',*,*,#60027,.T.); +#60090 = ORIENTED_EDGE('',*,*,#60091,.F.); +#60091 = EDGE_CURVE('',#60092,#60028,#60094,.T.); +#60092 = VERTEX_POINT('',#60093); +#60093 = CARTESIAN_POINT('',(-8.725,-2.36,0.)); +#60094 = CIRCLE('',#60095,0.275); +#60095 = AXIS2_PLACEMENT_3D('',#60096,#60097,#60098); +#60096 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#60097 = DIRECTION('',(0.,0.,1.)); +#60098 = DIRECTION('',(1.,0.,-0.)); +#60099 = ORIENTED_EDGE('',*,*,#60100,.F.); +#60100 = EDGE_CURVE('',#60101,#60092,#60103,.T.); +#60101 = VERTEX_POINT('',#60102); +#60102 = CARTESIAN_POINT('',(-9.,-2.635,0.)); +#60103 = CIRCLE('',#60104,0.275); +#60104 = AXIS2_PLACEMENT_3D('',#60105,#60106,#60107); +#60105 = CARTESIAN_POINT('',(-9.,-2.36,0.)); +#60106 = DIRECTION('',(0.,0.,1.)); +#60107 = DIRECTION('',(1.,0.,-0.)); +#60108 = ORIENTED_EDGE('',*,*,#60109,.T.); +#60109 = EDGE_CURVE('',#60101,#60110,#60112,.T.); +#60110 = VERTEX_POINT('',#60111); +#60111 = CARTESIAN_POINT('',(-9.,-2.81,0.)); +#60112 = LINE('',#60113,#60114); +#60113 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60114 = VECTOR('',#60115,1.); +#60115 = DIRECTION('',(0.,-1.,0.)); +#60116 = ORIENTED_EDGE('',*,*,#60117,.F.); +#60117 = EDGE_CURVE('',#60118,#60110,#60120,.T.); +#60118 = VERTEX_POINT('',#60119); +#60119 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60120 = LINE('',#60121,#60122); +#60121 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60122 = VECTOR('',#60123,1.); +#60123 = DIRECTION('',(-1.,0.,0.)); +#60124 = ORIENTED_EDGE('',*,*,#60125,.F.); +#60125 = EDGE_CURVE('',#60006,#60118,#60126,.T.); +#60126 = LINE('',#60127,#60128); +#60127 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60128 = VECTOR('',#60129,1.); +#60129 = DIRECTION('',(0.,-1.,0.)); +#60130 = PLANE('',#60131); +#60131 = AXIS2_PLACEMENT_3D('',#60132,#60133,#60134); +#60132 = CARTESIAN_POINT('',(-8.775,-2.36,0.)); +#60133 = DIRECTION('',(0.,0.,1.)); +#60134 = DIRECTION('',(1.,0.,-0.)); +#60135 = ADVANCED_FACE('',(#60136),#60161,.T.); +#60136 = FACE_BOUND('',#60137,.T.); +#60137 = EDGE_LOOP('',(#60138,#60146,#60154,#60160)); +#60138 = ORIENTED_EDGE('',*,*,#60139,.T.); +#60139 = EDGE_CURVE('',#59990,#60140,#60142,.T.); +#60140 = VERTEX_POINT('',#60141); +#60141 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#60142 = LINE('',#60143,#60144); +#60143 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60144 = VECTOR('',#60145,1.); +#60145 = DIRECTION('',(0.,0.,1.)); +#60146 = ORIENTED_EDGE('',*,*,#60147,.T.); +#60147 = EDGE_CURVE('',#60140,#60148,#60150,.T.); +#60148 = VERTEX_POINT('',#60149); +#60149 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#60150 = LINE('',#60151,#60152); +#60151 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#60152 = VECTOR('',#60153,1.); +#60153 = DIRECTION('',(1.,0.,0.)); +#60154 = ORIENTED_EDGE('',*,*,#60155,.F.); +#60155 = EDGE_CURVE('',#59998,#60148,#60156,.T.); +#60156 = LINE('',#60157,#60158); +#60157 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60158 = VECTOR('',#60159,1.); +#60159 = DIRECTION('',(0.,0.,1.)); +#60160 = ORIENTED_EDGE('',*,*,#59997,.F.); +#60161 = PLANE('',#60162); +#60162 = AXIS2_PLACEMENT_3D('',#60163,#60164,#60165); +#60163 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60164 = DIRECTION('',(0.,1.,0.)); +#60165 = DIRECTION('',(1.,0.,0.)); +#60166 = ADVANCED_FACE('',(#60167),#60194,.F.); +#60167 = FACE_BOUND('',#60168,.F.); +#60168 = EDGE_LOOP('',(#60169,#60180,#60186,#60187,#60188)); +#60169 = ORIENTED_EDGE('',*,*,#60170,.F.); +#60170 = EDGE_CURVE('',#60171,#60173,#60175,.T.); +#60171 = VERTEX_POINT('',#60172); +#60172 = CARTESIAN_POINT('',(-8.725,-2.36,0.8)); +#60173 = VERTEX_POINT('',#60174); +#60174 = CARTESIAN_POINT('',(-9.,-2.085,0.8)); +#60175 = CIRCLE('',#60176,0.275); +#60176 = AXIS2_PLACEMENT_3D('',#60177,#60178,#60179); +#60177 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#60178 = DIRECTION('',(0.,0.,1.)); +#60179 = DIRECTION('',(1.,0.,-0.)); +#60180 = ORIENTED_EDGE('',*,*,#60181,.T.); +#60181 = EDGE_CURVE('',#60171,#60092,#60182,.T.); +#60182 = LINE('',#60183,#60184); +#60183 = CARTESIAN_POINT('',(-8.725,-2.36,0.8)); +#60184 = VECTOR('',#60185,1.); +#60185 = DIRECTION('',(-0.,-0.,-1.)); +#60186 = ORIENTED_EDGE('',*,*,#60091,.T.); +#60187 = ORIENTED_EDGE('',*,*,#60044,.T.); +#60188 = ORIENTED_EDGE('',*,*,#60189,.T.); +#60189 = EDGE_CURVE('',#60037,#60173,#60190,.T.); +#60190 = LINE('',#60191,#60192); +#60191 = CARTESIAN_POINT('',(-9.,-2.085,0.8)); +#60192 = VECTOR('',#60193,1.); +#60193 = DIRECTION('',(0.,0.,1.)); +#60194 = CYLINDRICAL_SURFACE('',#60195,0.275); +#60195 = AXIS2_PLACEMENT_3D('',#60196,#60197,#60198); +#60196 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#60197 = DIRECTION('',(0.,0.,1.)); +#60198 = DIRECTION('',(1.,0.,-0.)); +#60199 = ADVANCED_FACE('',(#60200),#60211,.F.); +#60200 = FACE_BOUND('',#60201,.F.); +#60201 = EDGE_LOOP('',(#60202,#60203,#60204,#60210)); +#60202 = ORIENTED_EDGE('',*,*,#60036,.F.); +#60203 = ORIENTED_EDGE('',*,*,#60139,.T.); +#60204 = ORIENTED_EDGE('',*,*,#60205,.T.); +#60205 = EDGE_CURVE('',#60140,#60173,#60206,.T.); +#60206 = LINE('',#60207,#60208); +#60207 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#60208 = VECTOR('',#60209,1.); +#60209 = DIRECTION('',(0.,-1.,0.)); +#60210 = ORIENTED_EDGE('',*,*,#60189,.F.); +#60211 = PLANE('',#60212); +#60212 = AXIS2_PLACEMENT_3D('',#60213,#60214,#60215); +#60213 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60214 = DIRECTION('',(1.,0.,0.)); +#60215 = DIRECTION('',(0.,-1.,0.)); +#60216 = ADVANCED_FACE('',(#60217),#60235,.T.); +#60217 = FACE_BOUND('',#60218,.T.); +#60218 = EDGE_LOOP('',(#60219,#60220,#60228,#60234)); +#60219 = ORIENTED_EDGE('',*,*,#60058,.T.); +#60220 = ORIENTED_EDGE('',*,*,#60221,.T.); +#60221 = EDGE_CURVE('',#60059,#60222,#60224,.T.); +#60222 = VERTEX_POINT('',#60223); +#60223 = CARTESIAN_POINT('',(-8.15,-2.81,0.)); +#60224 = LINE('',#60225,#60226); +#60225 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#60226 = VECTOR('',#60227,1.); +#60227 = DIRECTION('',(0.,-1.,0.)); +#60228 = ORIENTED_EDGE('',*,*,#60229,.F.); +#60229 = EDGE_CURVE('',#60118,#60222,#60230,.T.); +#60230 = LINE('',#60231,#60232); +#60231 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60232 = VECTOR('',#60233,1.); +#60233 = DIRECTION('',(1.,0.,0.)); +#60234 = ORIENTED_EDGE('',*,*,#60125,.F.); +#60235 = PLANE('',#60236); +#60236 = AXIS2_PLACEMENT_3D('',#60237,#60238,#60239); +#60237 = CARTESIAN_POINT('',(-8.55,-1.91,0.)); +#60238 = DIRECTION('',(0.,0.,-1.)); +#60239 = DIRECTION('',(0.,-1.,0.)); +#60240 = ADVANCED_FACE('',(#60241),#60266,.F.); +#60241 = FACE_BOUND('',#60242,.F.); +#60242 = EDGE_LOOP('',(#60243,#60244,#60252,#60260)); +#60243 = ORIENTED_EDGE('',*,*,#60074,.T.); +#60244 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60245 = EDGE_CURVE('',#60067,#60246,#60248,.T.); +#60246 = VERTEX_POINT('',#60247); +#60247 = CARTESIAN_POINT('',(-8.15,-2.81,0.4)); +#60248 = LINE('',#60249,#60250); +#60249 = CARTESIAN_POINT('',(-8.15,-1.91,0.4)); +#60250 = VECTOR('',#60251,1.); +#60251 = DIRECTION('',(0.,-1.,0.)); +#60252 = ORIENTED_EDGE('',*,*,#60253,.F.); +#60253 = EDGE_CURVE('',#60254,#60246,#60256,.T.); +#60254 = VERTEX_POINT('',#60255); +#60255 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#60256 = LINE('',#60257,#60258); +#60257 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#60258 = VECTOR('',#60259,1.); +#60259 = DIRECTION('',(1.,0.,0.)); +#60260 = ORIENTED_EDGE('',*,*,#60261,.F.); +#60261 = EDGE_CURVE('',#59998,#60254,#60262,.T.); +#60262 = LINE('',#60263,#60264); +#60263 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60264 = VECTOR('',#60265,1.); +#60265 = DIRECTION('',(0.,-1.,0.)); +#60266 = PLANE('',#60267); +#60267 = AXIS2_PLACEMENT_3D('',#60268,#60269,#60270); +#60268 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60269 = DIRECTION('',(0.,0.,-1.)); +#60270 = DIRECTION('',(0.,-1.,0.)); +#60271 = ADVANCED_FACE('',(#60272),#60283,.T.); +#60272 = FACE_BOUND('',#60273,.T.); +#60273 = EDGE_LOOP('',(#60274,#60275,#60276,#60282)); +#60274 = ORIENTED_EDGE('',*,*,#60066,.T.); +#60275 = ORIENTED_EDGE('',*,*,#60245,.T.); +#60276 = ORIENTED_EDGE('',*,*,#60277,.F.); +#60277 = EDGE_CURVE('',#60222,#60246,#60278,.T.); +#60278 = LINE('',#60279,#60280); +#60279 = CARTESIAN_POINT('',(-8.15,-2.81,0.)); +#60280 = VECTOR('',#60281,1.); +#60281 = DIRECTION('',(0.,0.,1.)); +#60282 = ORIENTED_EDGE('',*,*,#60221,.F.); +#60283 = PLANE('',#60284); +#60284 = AXIS2_PLACEMENT_3D('',#60285,#60286,#60287); +#60285 = CARTESIAN_POINT('',(-8.15,-1.91,0.)); +#60286 = DIRECTION('',(1.,0.,0.)); +#60287 = DIRECTION('',(0.,-1.,0.)); +#60288 = ADVANCED_FACE('',(#60289),#60312,.T.); +#60289 = FACE_BOUND('',#60290,.T.); +#60290 = EDGE_LOOP('',(#60291,#60297,#60305,#60311)); +#60291 = ORIENTED_EDGE('',*,*,#60292,.T.); +#60292 = EDGE_CURVE('',#60118,#60254,#60293,.T.); +#60293 = LINE('',#60294,#60295); +#60294 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60295 = VECTOR('',#60296,1.); +#60296 = DIRECTION('',(0.,0.,1.)); +#60297 = ORIENTED_EDGE('',*,*,#60298,.T.); +#60298 = EDGE_CURVE('',#60254,#60299,#60301,.T.); +#60299 = VERTEX_POINT('',#60300); +#60300 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#60301 = LINE('',#60302,#60303); +#60302 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#60303 = VECTOR('',#60304,1.); +#60304 = DIRECTION('',(-1.,0.,0.)); +#60305 = ORIENTED_EDGE('',*,*,#60306,.F.); +#60306 = EDGE_CURVE('',#60110,#60299,#60307,.T.); +#60307 = LINE('',#60308,#60309); +#60308 = CARTESIAN_POINT('',(-9.,-2.81,0.)); +#60309 = VECTOR('',#60310,1.); +#60310 = DIRECTION('',(0.,0.,1.)); +#60311 = ORIENTED_EDGE('',*,*,#60117,.F.); +#60312 = PLANE('',#60313); +#60313 = AXIS2_PLACEMENT_3D('',#60314,#60315,#60316); +#60314 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60315 = DIRECTION('',(0.,-1.,0.)); +#60316 = DIRECTION('',(-1.,0.,0.)); +#60317 = ADVANCED_FACE('',(#60318),#60336,.F.); +#60318 = FACE_BOUND('',#60319,.F.); +#60319 = EDGE_LOOP('',(#60320,#60321,#60329,#60335)); +#60320 = ORIENTED_EDGE('',*,*,#60109,.F.); +#60321 = ORIENTED_EDGE('',*,*,#60322,.T.); +#60322 = EDGE_CURVE('',#60101,#60323,#60325,.T.); +#60323 = VERTEX_POINT('',#60324); +#60324 = CARTESIAN_POINT('',(-9.,-2.635,0.4)); +#60325 = LINE('',#60326,#60327); +#60326 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#60327 = VECTOR('',#60328,1.); +#60328 = DIRECTION('',(0.,0.,1.)); +#60329 = ORIENTED_EDGE('',*,*,#60330,.T.); +#60330 = EDGE_CURVE('',#60323,#60299,#60331,.T.); +#60331 = LINE('',#60332,#60333); +#60332 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60333 = VECTOR('',#60334,1.); +#60334 = DIRECTION('',(0.,-1.,0.)); +#60335 = ORIENTED_EDGE('',*,*,#60306,.F.); +#60336 = PLANE('',#60337); +#60337 = AXIS2_PLACEMENT_3D('',#60338,#60339,#60340); +#60338 = CARTESIAN_POINT('',(-9.,-1.91,0.)); +#60339 = DIRECTION('',(1.,0.,0.)); +#60340 = DIRECTION('',(0.,-1.,0.)); +#60341 = ADVANCED_FACE('',(#60342),#60362,.F.); +#60342 = FACE_BOUND('',#60343,.F.); +#60343 = EDGE_LOOP('',(#60344,#60345,#60354,#60360,#60361)); +#60344 = ORIENTED_EDGE('',*,*,#60181,.F.); +#60345 = ORIENTED_EDGE('',*,*,#60346,.F.); +#60346 = EDGE_CURVE('',#60347,#60171,#60349,.T.); +#60347 = VERTEX_POINT('',#60348); +#60348 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#60349 = CIRCLE('',#60350,0.275); +#60350 = AXIS2_PLACEMENT_3D('',#60351,#60352,#60353); +#60351 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#60352 = DIRECTION('',(0.,0.,1.)); +#60353 = DIRECTION('',(1.,0.,-0.)); +#60354 = ORIENTED_EDGE('',*,*,#60355,.F.); +#60355 = EDGE_CURVE('',#60323,#60347,#60356,.T.); +#60356 = LINE('',#60357,#60358); +#60357 = CARTESIAN_POINT('',(-9.,-2.635,0.8)); +#60358 = VECTOR('',#60359,1.); +#60359 = DIRECTION('',(0.,0.,1.)); +#60360 = ORIENTED_EDGE('',*,*,#60322,.F.); +#60361 = ORIENTED_EDGE('',*,*,#60100,.T.); +#60362 = CYLINDRICAL_SURFACE('',#60363,0.275); +#60363 = AXIS2_PLACEMENT_3D('',#60364,#60365,#60366); +#60364 = CARTESIAN_POINT('',(-9.,-2.36,0.8)); +#60365 = DIRECTION('',(0.,0.,1.)); +#60366 = DIRECTION('',(1.,0.,-0.)); +#60367 = ADVANCED_FACE('',(#60368),#60386,.T.); +#60368 = FACE_BOUND('',#60369,.T.); +#60369 = EDGE_LOOP('',(#60370,#60371,#60379,#60385)); +#60370 = ORIENTED_EDGE('',*,*,#60155,.T.); +#60371 = ORIENTED_EDGE('',*,*,#60372,.T.); +#60372 = EDGE_CURVE('',#60148,#60373,#60375,.T.); +#60373 = VERTEX_POINT('',#60374); +#60374 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#60375 = LINE('',#60376,#60377); +#60376 = CARTESIAN_POINT('',(-8.55,-1.91,0.8)); +#60377 = VECTOR('',#60378,1.); +#60378 = DIRECTION('',(0.,-1.,0.)); +#60379 = ORIENTED_EDGE('',*,*,#60380,.F.); +#60380 = EDGE_CURVE('',#60254,#60373,#60381,.T.); +#60381 = LINE('',#60382,#60383); +#60382 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#60383 = VECTOR('',#60384,1.); +#60384 = DIRECTION('',(0.,0.,1.)); +#60385 = ORIENTED_EDGE('',*,*,#60261,.F.); +#60386 = PLANE('',#60387); +#60387 = AXIS2_PLACEMENT_3D('',#60388,#60389,#60390); +#60388 = CARTESIAN_POINT('',(-8.55,-1.91,0.4)); +#60389 = DIRECTION('',(1.,0.,0.)); +#60390 = DIRECTION('',(0.,-1.,0.)); +#60391 = ADVANCED_FACE('',(#60392),#60413,.T.); +#60392 = FACE_BOUND('',#60393,.T.); +#60393 = EDGE_LOOP('',(#60394,#60395,#60396,#60397,#60398,#60406,#60412) + ); +#60394 = ORIENTED_EDGE('',*,*,#60147,.F.); +#60395 = ORIENTED_EDGE('',*,*,#60205,.T.); +#60396 = ORIENTED_EDGE('',*,*,#60170,.F.); +#60397 = ORIENTED_EDGE('',*,*,#60346,.F.); +#60398 = ORIENTED_EDGE('',*,*,#60399,.T.); +#60399 = EDGE_CURVE('',#60347,#60400,#60402,.T.); +#60400 = VERTEX_POINT('',#60401); +#60401 = CARTESIAN_POINT('',(-9.,-2.81,0.8)); +#60402 = LINE('',#60403,#60404); +#60403 = CARTESIAN_POINT('',(-9.,-1.91,0.8)); +#60404 = VECTOR('',#60405,1.); +#60405 = DIRECTION('',(0.,-1.,0.)); +#60406 = ORIENTED_EDGE('',*,*,#60407,.F.); +#60407 = EDGE_CURVE('',#60373,#60400,#60408,.T.); +#60408 = LINE('',#60409,#60410); +#60409 = CARTESIAN_POINT('',(-8.55,-2.81,0.8)); +#60410 = VECTOR('',#60411,1.); +#60411 = DIRECTION('',(-1.,0.,0.)); +#60412 = ORIENTED_EDGE('',*,*,#60372,.F.); +#60413 = PLANE('',#60414); +#60414 = AXIS2_PLACEMENT_3D('',#60415,#60416,#60417); +#60415 = CARTESIAN_POINT('',(-8.775,-2.36,0.8)); +#60416 = DIRECTION('',(0.,0.,1.)); +#60417 = DIRECTION('',(1.,0.,-0.)); +#60418 = ADVANCED_FACE('',(#60419),#60425,.T.); +#60419 = FACE_BOUND('',#60420,.T.); +#60420 = EDGE_LOOP('',(#60421,#60422,#60423,#60424)); +#60421 = ORIENTED_EDGE('',*,*,#60229,.T.); +#60422 = ORIENTED_EDGE('',*,*,#60277,.T.); +#60423 = ORIENTED_EDGE('',*,*,#60253,.F.); +#60424 = ORIENTED_EDGE('',*,*,#60292,.F.); +#60425 = PLANE('',#60426); +#60426 = AXIS2_PLACEMENT_3D('',#60427,#60428,#60429); +#60427 = CARTESIAN_POINT('',(-8.55,-2.81,0.)); +#60428 = DIRECTION('',(0.,-1.,0.)); +#60429 = DIRECTION('',(0.,0.,1.)); +#60430 = ADVANCED_FACE('',(#60431),#60442,.T.); +#60431 = FACE_BOUND('',#60432,.T.); +#60432 = EDGE_LOOP('',(#60433,#60434,#60435,#60441)); +#60433 = ORIENTED_EDGE('',*,*,#60380,.T.); +#60434 = ORIENTED_EDGE('',*,*,#60407,.T.); +#60435 = ORIENTED_EDGE('',*,*,#60436,.F.); +#60436 = EDGE_CURVE('',#60299,#60400,#60437,.T.); +#60437 = LINE('',#60438,#60439); +#60438 = CARTESIAN_POINT('',(-9.,-2.81,0.4)); +#60439 = VECTOR('',#60440,1.); +#60440 = DIRECTION('',(0.,0.,1.)); +#60441 = ORIENTED_EDGE('',*,*,#60298,.F.); +#60442 = PLANE('',#60443); +#60443 = AXIS2_PLACEMENT_3D('',#60444,#60445,#60446); +#60444 = CARTESIAN_POINT('',(-8.55,-2.81,0.4)); +#60445 = DIRECTION('',(0.,-1.,0.)); +#60446 = DIRECTION('',(-1.,0.,0.)); +#60447 = ADVANCED_FACE('',(#60448),#60454,.F.); +#60448 = FACE_BOUND('',#60449,.F.); +#60449 = EDGE_LOOP('',(#60450,#60451,#60452,#60453)); +#60450 = ORIENTED_EDGE('',*,*,#60330,.F.); +#60451 = ORIENTED_EDGE('',*,*,#60355,.T.); +#60452 = ORIENTED_EDGE('',*,*,#60399,.T.); +#60453 = ORIENTED_EDGE('',*,*,#60436,.F.); +#60454 = PLANE('',#60455); +#60455 = AXIS2_PLACEMENT_3D('',#60456,#60457,#60458); +#60456 = CARTESIAN_POINT('',(-9.,-1.91,0.4)); +#60457 = DIRECTION('',(1.,0.,0.)); +#60458 = DIRECTION('',(0.,-1.,0.)); +#60459 = MANIFOLD_SOLID_BREP('',#60460); +#60460 = CLOSED_SHELL('',(#60461,#60501,#60532,#60563,#60613,#60644, + #60677,#60694,#60718,#60749,#60766,#60795,#60819,#60845,#60869, + #60896,#60908,#60925)); +#60461 = ADVANCED_FACE('',(#60462),#60496,.T.); +#60462 = FACE_BOUND('',#60463,.T.); +#60463 = EDGE_LOOP('',(#60464,#60474,#60482,#60490)); +#60464 = ORIENTED_EDGE('',*,*,#60465,.T.); +#60465 = EDGE_CURVE('',#60466,#60468,#60470,.T.); +#60466 = VERTEX_POINT('',#60467); +#60467 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60468 = VERTEX_POINT('',#60469); +#60469 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60470 = LINE('',#60471,#60472); +#60471 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60472 = VECTOR('',#60473,1.); +#60473 = DIRECTION('',(0.,0.,1.)); +#60474 = ORIENTED_EDGE('',*,*,#60475,.T.); +#60475 = EDGE_CURVE('',#60468,#60476,#60478,.T.); +#60476 = VERTEX_POINT('',#60477); +#60477 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60478 = LINE('',#60479,#60480); +#60479 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60480 = VECTOR('',#60481,1.); +#60481 = DIRECTION('',(1.,0.,0.)); +#60482 = ORIENTED_EDGE('',*,*,#60483,.F.); +#60483 = EDGE_CURVE('',#60484,#60476,#60486,.T.); +#60484 = VERTEX_POINT('',#60485); +#60485 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60486 = LINE('',#60487,#60488); +#60487 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60488 = VECTOR('',#60489,1.); +#60489 = DIRECTION('',(0.,0.,1.)); +#60490 = ORIENTED_EDGE('',*,*,#60491,.F.); +#60491 = EDGE_CURVE('',#60466,#60484,#60492,.T.); +#60492 = LINE('',#60493,#60494); +#60493 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60494 = VECTOR('',#60495,1.); +#60495 = DIRECTION('',(1.,0.,0.)); +#60496 = PLANE('',#60497); +#60497 = AXIS2_PLACEMENT_3D('',#60498,#60499,#60500); +#60498 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60499 = DIRECTION('',(0.,1.,0.)); +#60500 = DIRECTION('',(1.,0.,0.)); +#60501 = ADVANCED_FACE('',(#60502),#60527,.F.); +#60502 = FACE_BOUND('',#60503,.F.); +#60503 = EDGE_LOOP('',(#60504,#60512,#60513,#60521)); +#60504 = ORIENTED_EDGE('',*,*,#60505,.F.); +#60505 = EDGE_CURVE('',#60466,#60506,#60508,.T.); +#60506 = VERTEX_POINT('',#60507); +#60507 = CARTESIAN_POINT('',(-9.,-3.355,0.)); +#60508 = LINE('',#60509,#60510); +#60509 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60510 = VECTOR('',#60511,1.); +#60511 = DIRECTION('',(0.,-1.,0.)); +#60512 = ORIENTED_EDGE('',*,*,#60465,.T.); +#60513 = ORIENTED_EDGE('',*,*,#60514,.T.); +#60514 = EDGE_CURVE('',#60468,#60515,#60517,.T.); +#60515 = VERTEX_POINT('',#60516); +#60516 = CARTESIAN_POINT('',(-9.,-3.355,0.4)); +#60517 = LINE('',#60518,#60519); +#60518 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60519 = VECTOR('',#60520,1.); +#60520 = DIRECTION('',(0.,-1.,0.)); +#60521 = ORIENTED_EDGE('',*,*,#60522,.F.); +#60522 = EDGE_CURVE('',#60506,#60515,#60523,.T.); +#60523 = LINE('',#60524,#60525); +#60524 = CARTESIAN_POINT('',(-9.,-3.355,0.8)); +#60525 = VECTOR('',#60526,1.); +#60526 = DIRECTION('',(0.,0.,1.)); +#60527 = PLANE('',#60528); +#60528 = AXIS2_PLACEMENT_3D('',#60529,#60530,#60531); +#60529 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60530 = DIRECTION('',(1.,0.,0.)); +#60531 = DIRECTION('',(0.,-1.,0.)); +#60532 = ADVANCED_FACE('',(#60533),#60558,.F.); +#60533 = FACE_BOUND('',#60534,.F.); +#60534 = EDGE_LOOP('',(#60535,#60543,#60551,#60557)); +#60535 = ORIENTED_EDGE('',*,*,#60536,.T.); +#60536 = EDGE_CURVE('',#60484,#60537,#60539,.T.); +#60537 = VERTEX_POINT('',#60538); +#60538 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#60539 = LINE('',#60540,#60541); +#60540 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60541 = VECTOR('',#60542,1.); +#60542 = DIRECTION('',(1.,0.,0.)); +#60543 = ORIENTED_EDGE('',*,*,#60544,.T.); +#60544 = EDGE_CURVE('',#60537,#60545,#60547,.T.); +#60545 = VERTEX_POINT('',#60546); +#60546 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#60547 = LINE('',#60548,#60549); +#60548 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#60549 = VECTOR('',#60550,1.); +#60550 = DIRECTION('',(0.,0.,1.)); +#60551 = ORIENTED_EDGE('',*,*,#60552,.F.); +#60552 = EDGE_CURVE('',#60476,#60545,#60553,.T.); +#60553 = LINE('',#60554,#60555); +#60554 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60555 = VECTOR('',#60556,1.); +#60556 = DIRECTION('',(1.,0.,0.)); +#60557 = ORIENTED_EDGE('',*,*,#60483,.F.); +#60558 = PLANE('',#60559); +#60559 = AXIS2_PLACEMENT_3D('',#60560,#60561,#60562); +#60560 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60561 = DIRECTION('',(0.,-1.,0.)); +#60562 = DIRECTION('',(0.,0.,1.)); +#60563 = ADVANCED_FACE('',(#60564),#60608,.F.); +#60564 = FACE_BOUND('',#60565,.F.); +#60565 = EDGE_LOOP('',(#60566,#60567,#60568,#60577,#60586,#60594,#60602) + ); +#60566 = ORIENTED_EDGE('',*,*,#60491,.F.); +#60567 = ORIENTED_EDGE('',*,*,#60505,.T.); +#60568 = ORIENTED_EDGE('',*,*,#60569,.F.); +#60569 = EDGE_CURVE('',#60570,#60506,#60572,.T.); +#60570 = VERTEX_POINT('',#60571); +#60571 = CARTESIAN_POINT('',(-8.725,-3.63,0.)); +#60572 = CIRCLE('',#60573,0.275); +#60573 = AXIS2_PLACEMENT_3D('',#60574,#60575,#60576); +#60574 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#60575 = DIRECTION('',(0.,0.,1.)); +#60576 = DIRECTION('',(1.,0.,-0.)); +#60577 = ORIENTED_EDGE('',*,*,#60578,.F.); +#60578 = EDGE_CURVE('',#60579,#60570,#60581,.T.); +#60579 = VERTEX_POINT('',#60580); +#60580 = CARTESIAN_POINT('',(-9.,-3.905,0.)); +#60581 = CIRCLE('',#60582,0.275); +#60582 = AXIS2_PLACEMENT_3D('',#60583,#60584,#60585); +#60583 = CARTESIAN_POINT('',(-9.,-3.63,0.)); +#60584 = DIRECTION('',(0.,0.,1.)); +#60585 = DIRECTION('',(1.,0.,-0.)); +#60586 = ORIENTED_EDGE('',*,*,#60587,.T.); +#60587 = EDGE_CURVE('',#60579,#60588,#60590,.T.); +#60588 = VERTEX_POINT('',#60589); +#60589 = CARTESIAN_POINT('',(-9.,-4.08,0.)); +#60590 = LINE('',#60591,#60592); +#60591 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60592 = VECTOR('',#60593,1.); +#60593 = DIRECTION('',(0.,-1.,0.)); +#60594 = ORIENTED_EDGE('',*,*,#60595,.F.); +#60595 = EDGE_CURVE('',#60596,#60588,#60598,.T.); +#60596 = VERTEX_POINT('',#60597); +#60597 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60598 = LINE('',#60599,#60600); +#60599 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60600 = VECTOR('',#60601,1.); +#60601 = DIRECTION('',(-1.,0.,0.)); +#60602 = ORIENTED_EDGE('',*,*,#60603,.F.); +#60603 = EDGE_CURVE('',#60484,#60596,#60604,.T.); +#60604 = LINE('',#60605,#60606); +#60605 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60606 = VECTOR('',#60607,1.); +#60607 = DIRECTION('',(0.,-1.,0.)); +#60608 = PLANE('',#60609); +#60609 = AXIS2_PLACEMENT_3D('',#60610,#60611,#60612); +#60610 = CARTESIAN_POINT('',(-8.775,-3.63,0.)); +#60611 = DIRECTION('',(0.,0.,1.)); +#60612 = DIRECTION('',(1.,0.,-0.)); +#60613 = ADVANCED_FACE('',(#60614),#60639,.T.); +#60614 = FACE_BOUND('',#60615,.T.); +#60615 = EDGE_LOOP('',(#60616,#60624,#60632,#60638)); +#60616 = ORIENTED_EDGE('',*,*,#60617,.T.); +#60617 = EDGE_CURVE('',#60468,#60618,#60620,.T.); +#60618 = VERTEX_POINT('',#60619); +#60619 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#60620 = LINE('',#60621,#60622); +#60621 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60622 = VECTOR('',#60623,1.); +#60623 = DIRECTION('',(0.,0.,1.)); +#60624 = ORIENTED_EDGE('',*,*,#60625,.T.); +#60625 = EDGE_CURVE('',#60618,#60626,#60628,.T.); +#60626 = VERTEX_POINT('',#60627); +#60627 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#60628 = LINE('',#60629,#60630); +#60629 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#60630 = VECTOR('',#60631,1.); +#60631 = DIRECTION('',(1.,0.,0.)); +#60632 = ORIENTED_EDGE('',*,*,#60633,.F.); +#60633 = EDGE_CURVE('',#60476,#60626,#60634,.T.); +#60634 = LINE('',#60635,#60636); +#60635 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60636 = VECTOR('',#60637,1.); +#60637 = DIRECTION('',(0.,0.,1.)); +#60638 = ORIENTED_EDGE('',*,*,#60475,.F.); +#60639 = PLANE('',#60640); +#60640 = AXIS2_PLACEMENT_3D('',#60641,#60642,#60643); +#60641 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60642 = DIRECTION('',(0.,1.,0.)); +#60643 = DIRECTION('',(1.,0.,0.)); +#60644 = ADVANCED_FACE('',(#60645),#60672,.F.); +#60645 = FACE_BOUND('',#60646,.F.); +#60646 = EDGE_LOOP('',(#60647,#60658,#60664,#60665,#60666)); +#60647 = ORIENTED_EDGE('',*,*,#60648,.F.); +#60648 = EDGE_CURVE('',#60649,#60651,#60653,.T.); +#60649 = VERTEX_POINT('',#60650); +#60650 = CARTESIAN_POINT('',(-8.725,-3.63,0.8)); +#60651 = VERTEX_POINT('',#60652); +#60652 = CARTESIAN_POINT('',(-9.,-3.355,0.8)); +#60653 = CIRCLE('',#60654,0.275); +#60654 = AXIS2_PLACEMENT_3D('',#60655,#60656,#60657); +#60655 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#60656 = DIRECTION('',(0.,0.,1.)); +#60657 = DIRECTION('',(1.,0.,-0.)); +#60658 = ORIENTED_EDGE('',*,*,#60659,.T.); +#60659 = EDGE_CURVE('',#60649,#60570,#60660,.T.); +#60660 = LINE('',#60661,#60662); +#60661 = CARTESIAN_POINT('',(-8.725,-3.63,0.8)); +#60662 = VECTOR('',#60663,1.); +#60663 = DIRECTION('',(-0.,-0.,-1.)); +#60664 = ORIENTED_EDGE('',*,*,#60569,.T.); +#60665 = ORIENTED_EDGE('',*,*,#60522,.T.); +#60666 = ORIENTED_EDGE('',*,*,#60667,.T.); +#60667 = EDGE_CURVE('',#60515,#60651,#60668,.T.); +#60668 = LINE('',#60669,#60670); +#60669 = CARTESIAN_POINT('',(-9.,-3.355,0.8)); +#60670 = VECTOR('',#60671,1.); +#60671 = DIRECTION('',(0.,0.,1.)); +#60672 = CYLINDRICAL_SURFACE('',#60673,0.275); +#60673 = AXIS2_PLACEMENT_3D('',#60674,#60675,#60676); +#60674 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#60675 = DIRECTION('',(0.,0.,1.)); +#60676 = DIRECTION('',(1.,0.,-0.)); +#60677 = ADVANCED_FACE('',(#60678),#60689,.F.); +#60678 = FACE_BOUND('',#60679,.F.); +#60679 = EDGE_LOOP('',(#60680,#60681,#60682,#60688)); +#60680 = ORIENTED_EDGE('',*,*,#60514,.F.); +#60681 = ORIENTED_EDGE('',*,*,#60617,.T.); +#60682 = ORIENTED_EDGE('',*,*,#60683,.T.); +#60683 = EDGE_CURVE('',#60618,#60651,#60684,.T.); +#60684 = LINE('',#60685,#60686); +#60685 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#60686 = VECTOR('',#60687,1.); +#60687 = DIRECTION('',(0.,-1.,0.)); +#60688 = ORIENTED_EDGE('',*,*,#60667,.F.); +#60689 = PLANE('',#60690); +#60690 = AXIS2_PLACEMENT_3D('',#60691,#60692,#60693); +#60691 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60692 = DIRECTION('',(1.,0.,0.)); +#60693 = DIRECTION('',(0.,-1.,0.)); +#60694 = ADVANCED_FACE('',(#60695),#60713,.T.); +#60695 = FACE_BOUND('',#60696,.T.); +#60696 = EDGE_LOOP('',(#60697,#60698,#60706,#60712)); +#60697 = ORIENTED_EDGE('',*,*,#60536,.T.); +#60698 = ORIENTED_EDGE('',*,*,#60699,.T.); +#60699 = EDGE_CURVE('',#60537,#60700,#60702,.T.); +#60700 = VERTEX_POINT('',#60701); +#60701 = CARTESIAN_POINT('',(-8.15,-4.08,0.)); +#60702 = LINE('',#60703,#60704); +#60703 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#60704 = VECTOR('',#60705,1.); +#60705 = DIRECTION('',(0.,-1.,0.)); +#60706 = ORIENTED_EDGE('',*,*,#60707,.F.); +#60707 = EDGE_CURVE('',#60596,#60700,#60708,.T.); +#60708 = LINE('',#60709,#60710); +#60709 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60710 = VECTOR('',#60711,1.); +#60711 = DIRECTION('',(1.,0.,0.)); +#60712 = ORIENTED_EDGE('',*,*,#60603,.F.); +#60713 = PLANE('',#60714); +#60714 = AXIS2_PLACEMENT_3D('',#60715,#60716,#60717); +#60715 = CARTESIAN_POINT('',(-8.55,-3.18,0.)); +#60716 = DIRECTION('',(0.,0.,-1.)); +#60717 = DIRECTION('',(0.,-1.,0.)); +#60718 = ADVANCED_FACE('',(#60719),#60744,.F.); +#60719 = FACE_BOUND('',#60720,.F.); +#60720 = EDGE_LOOP('',(#60721,#60722,#60730,#60738)); +#60721 = ORIENTED_EDGE('',*,*,#60552,.T.); +#60722 = ORIENTED_EDGE('',*,*,#60723,.T.); +#60723 = EDGE_CURVE('',#60545,#60724,#60726,.T.); +#60724 = VERTEX_POINT('',#60725); +#60725 = CARTESIAN_POINT('',(-8.15,-4.08,0.4)); +#60726 = LINE('',#60727,#60728); +#60727 = CARTESIAN_POINT('',(-8.15,-3.18,0.4)); +#60728 = VECTOR('',#60729,1.); +#60729 = DIRECTION('',(0.,-1.,0.)); +#60730 = ORIENTED_EDGE('',*,*,#60731,.F.); +#60731 = EDGE_CURVE('',#60732,#60724,#60734,.T.); +#60732 = VERTEX_POINT('',#60733); +#60733 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#60734 = LINE('',#60735,#60736); +#60735 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#60736 = VECTOR('',#60737,1.); +#60737 = DIRECTION('',(1.,0.,0.)); +#60738 = ORIENTED_EDGE('',*,*,#60739,.F.); +#60739 = EDGE_CURVE('',#60476,#60732,#60740,.T.); +#60740 = LINE('',#60741,#60742); +#60741 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60742 = VECTOR('',#60743,1.); +#60743 = DIRECTION('',(0.,-1.,0.)); +#60744 = PLANE('',#60745); +#60745 = AXIS2_PLACEMENT_3D('',#60746,#60747,#60748); +#60746 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60747 = DIRECTION('',(0.,0.,-1.)); +#60748 = DIRECTION('',(0.,-1.,0.)); +#60749 = ADVANCED_FACE('',(#60750),#60761,.T.); +#60750 = FACE_BOUND('',#60751,.T.); +#60751 = EDGE_LOOP('',(#60752,#60753,#60754,#60760)); +#60752 = ORIENTED_EDGE('',*,*,#60544,.T.); +#60753 = ORIENTED_EDGE('',*,*,#60723,.T.); +#60754 = ORIENTED_EDGE('',*,*,#60755,.F.); +#60755 = EDGE_CURVE('',#60700,#60724,#60756,.T.); +#60756 = LINE('',#60757,#60758); +#60757 = CARTESIAN_POINT('',(-8.15,-4.08,0.)); +#60758 = VECTOR('',#60759,1.); +#60759 = DIRECTION('',(0.,0.,1.)); +#60760 = ORIENTED_EDGE('',*,*,#60699,.F.); +#60761 = PLANE('',#60762); +#60762 = AXIS2_PLACEMENT_3D('',#60763,#60764,#60765); +#60763 = CARTESIAN_POINT('',(-8.15,-3.18,0.)); +#60764 = DIRECTION('',(1.,0.,0.)); +#60765 = DIRECTION('',(0.,-1.,0.)); +#60766 = ADVANCED_FACE('',(#60767),#60790,.T.); +#60767 = FACE_BOUND('',#60768,.T.); +#60768 = EDGE_LOOP('',(#60769,#60775,#60783,#60789)); +#60769 = ORIENTED_EDGE('',*,*,#60770,.T.); +#60770 = EDGE_CURVE('',#60596,#60732,#60771,.T.); +#60771 = LINE('',#60772,#60773); +#60772 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60773 = VECTOR('',#60774,1.); +#60774 = DIRECTION('',(0.,0.,1.)); +#60775 = ORIENTED_EDGE('',*,*,#60776,.T.); +#60776 = EDGE_CURVE('',#60732,#60777,#60779,.T.); +#60777 = VERTEX_POINT('',#60778); +#60778 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#60779 = LINE('',#60780,#60781); +#60780 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#60781 = VECTOR('',#60782,1.); +#60782 = DIRECTION('',(-1.,0.,0.)); +#60783 = ORIENTED_EDGE('',*,*,#60784,.F.); +#60784 = EDGE_CURVE('',#60588,#60777,#60785,.T.); +#60785 = LINE('',#60786,#60787); +#60786 = CARTESIAN_POINT('',(-9.,-4.08,0.)); +#60787 = VECTOR('',#60788,1.); +#60788 = DIRECTION('',(0.,0.,1.)); +#60789 = ORIENTED_EDGE('',*,*,#60595,.F.); +#60790 = PLANE('',#60791); +#60791 = AXIS2_PLACEMENT_3D('',#60792,#60793,#60794); +#60792 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60793 = DIRECTION('',(0.,-1.,0.)); +#60794 = DIRECTION('',(-1.,0.,0.)); +#60795 = ADVANCED_FACE('',(#60796),#60814,.F.); +#60796 = FACE_BOUND('',#60797,.F.); +#60797 = EDGE_LOOP('',(#60798,#60799,#60807,#60813)); +#60798 = ORIENTED_EDGE('',*,*,#60587,.F.); +#60799 = ORIENTED_EDGE('',*,*,#60800,.T.); +#60800 = EDGE_CURVE('',#60579,#60801,#60803,.T.); +#60801 = VERTEX_POINT('',#60802); +#60802 = CARTESIAN_POINT('',(-9.,-3.905,0.4)); +#60803 = LINE('',#60804,#60805); +#60804 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#60805 = VECTOR('',#60806,1.); +#60806 = DIRECTION('',(0.,0.,1.)); +#60807 = ORIENTED_EDGE('',*,*,#60808,.T.); +#60808 = EDGE_CURVE('',#60801,#60777,#60809,.T.); +#60809 = LINE('',#60810,#60811); +#60810 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60811 = VECTOR('',#60812,1.); +#60812 = DIRECTION('',(0.,-1.,0.)); +#60813 = ORIENTED_EDGE('',*,*,#60784,.F.); +#60814 = PLANE('',#60815); +#60815 = AXIS2_PLACEMENT_3D('',#60816,#60817,#60818); +#60816 = CARTESIAN_POINT('',(-9.,-3.18,0.)); +#60817 = DIRECTION('',(1.,0.,0.)); +#60818 = DIRECTION('',(0.,-1.,0.)); +#60819 = ADVANCED_FACE('',(#60820),#60840,.F.); +#60820 = FACE_BOUND('',#60821,.F.); +#60821 = EDGE_LOOP('',(#60822,#60823,#60832,#60838,#60839)); +#60822 = ORIENTED_EDGE('',*,*,#60659,.F.); +#60823 = ORIENTED_EDGE('',*,*,#60824,.F.); +#60824 = EDGE_CURVE('',#60825,#60649,#60827,.T.); +#60825 = VERTEX_POINT('',#60826); +#60826 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#60827 = CIRCLE('',#60828,0.275); +#60828 = AXIS2_PLACEMENT_3D('',#60829,#60830,#60831); +#60829 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#60830 = DIRECTION('',(0.,0.,1.)); +#60831 = DIRECTION('',(1.,0.,-0.)); +#60832 = ORIENTED_EDGE('',*,*,#60833,.F.); +#60833 = EDGE_CURVE('',#60801,#60825,#60834,.T.); +#60834 = LINE('',#60835,#60836); +#60835 = CARTESIAN_POINT('',(-9.,-3.905,0.8)); +#60836 = VECTOR('',#60837,1.); +#60837 = DIRECTION('',(0.,0.,1.)); +#60838 = ORIENTED_EDGE('',*,*,#60800,.F.); +#60839 = ORIENTED_EDGE('',*,*,#60578,.T.); +#60840 = CYLINDRICAL_SURFACE('',#60841,0.275); +#60841 = AXIS2_PLACEMENT_3D('',#60842,#60843,#60844); +#60842 = CARTESIAN_POINT('',(-9.,-3.63,0.8)); +#60843 = DIRECTION('',(0.,0.,1.)); +#60844 = DIRECTION('',(1.,0.,-0.)); +#60845 = ADVANCED_FACE('',(#60846),#60864,.T.); +#60846 = FACE_BOUND('',#60847,.T.); +#60847 = EDGE_LOOP('',(#60848,#60849,#60857,#60863)); +#60848 = ORIENTED_EDGE('',*,*,#60633,.T.); +#60849 = ORIENTED_EDGE('',*,*,#60850,.T.); +#60850 = EDGE_CURVE('',#60626,#60851,#60853,.T.); +#60851 = VERTEX_POINT('',#60852); +#60852 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#60853 = LINE('',#60854,#60855); +#60854 = CARTESIAN_POINT('',(-8.55,-3.18,0.8)); +#60855 = VECTOR('',#60856,1.); +#60856 = DIRECTION('',(0.,-1.,0.)); +#60857 = ORIENTED_EDGE('',*,*,#60858,.F.); +#60858 = EDGE_CURVE('',#60732,#60851,#60859,.T.); +#60859 = LINE('',#60860,#60861); +#60860 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#60861 = VECTOR('',#60862,1.); +#60862 = DIRECTION('',(0.,0.,1.)); +#60863 = ORIENTED_EDGE('',*,*,#60739,.F.); +#60864 = PLANE('',#60865); +#60865 = AXIS2_PLACEMENT_3D('',#60866,#60867,#60868); +#60866 = CARTESIAN_POINT('',(-8.55,-3.18,0.4)); +#60867 = DIRECTION('',(1.,0.,0.)); +#60868 = DIRECTION('',(0.,-1.,0.)); +#60869 = ADVANCED_FACE('',(#60870),#60891,.T.); +#60870 = FACE_BOUND('',#60871,.T.); +#60871 = EDGE_LOOP('',(#60872,#60873,#60874,#60875,#60876,#60884,#60890) + ); +#60872 = ORIENTED_EDGE('',*,*,#60625,.F.); +#60873 = ORIENTED_EDGE('',*,*,#60683,.T.); +#60874 = ORIENTED_EDGE('',*,*,#60648,.F.); +#60875 = ORIENTED_EDGE('',*,*,#60824,.F.); +#60876 = ORIENTED_EDGE('',*,*,#60877,.T.); +#60877 = EDGE_CURVE('',#60825,#60878,#60880,.T.); +#60878 = VERTEX_POINT('',#60879); +#60879 = CARTESIAN_POINT('',(-9.,-4.08,0.8)); +#60880 = LINE('',#60881,#60882); +#60881 = CARTESIAN_POINT('',(-9.,-3.18,0.8)); +#60882 = VECTOR('',#60883,1.); +#60883 = DIRECTION('',(0.,-1.,0.)); +#60884 = ORIENTED_EDGE('',*,*,#60885,.F.); +#60885 = EDGE_CURVE('',#60851,#60878,#60886,.T.); +#60886 = LINE('',#60887,#60888); +#60887 = CARTESIAN_POINT('',(-8.55,-4.08,0.8)); +#60888 = VECTOR('',#60889,1.); +#60889 = DIRECTION('',(-1.,0.,0.)); +#60890 = ORIENTED_EDGE('',*,*,#60850,.F.); +#60891 = PLANE('',#60892); +#60892 = AXIS2_PLACEMENT_3D('',#60893,#60894,#60895); +#60893 = CARTESIAN_POINT('',(-8.775,-3.63,0.8)); +#60894 = DIRECTION('',(0.,0.,1.)); +#60895 = DIRECTION('',(1.,0.,-0.)); +#60896 = ADVANCED_FACE('',(#60897),#60903,.T.); +#60897 = FACE_BOUND('',#60898,.T.); +#60898 = EDGE_LOOP('',(#60899,#60900,#60901,#60902)); +#60899 = ORIENTED_EDGE('',*,*,#60707,.T.); +#60900 = ORIENTED_EDGE('',*,*,#60755,.T.); +#60901 = ORIENTED_EDGE('',*,*,#60731,.F.); +#60902 = ORIENTED_EDGE('',*,*,#60770,.F.); +#60903 = PLANE('',#60904); +#60904 = AXIS2_PLACEMENT_3D('',#60905,#60906,#60907); +#60905 = CARTESIAN_POINT('',(-8.55,-4.08,0.)); +#60906 = DIRECTION('',(0.,-1.,0.)); +#60907 = DIRECTION('',(0.,0.,1.)); +#60908 = ADVANCED_FACE('',(#60909),#60920,.T.); +#60909 = FACE_BOUND('',#60910,.T.); +#60910 = EDGE_LOOP('',(#60911,#60912,#60913,#60919)); +#60911 = ORIENTED_EDGE('',*,*,#60858,.T.); +#60912 = ORIENTED_EDGE('',*,*,#60885,.T.); +#60913 = ORIENTED_EDGE('',*,*,#60914,.F.); +#60914 = EDGE_CURVE('',#60777,#60878,#60915,.T.); +#60915 = LINE('',#60916,#60917); +#60916 = CARTESIAN_POINT('',(-9.,-4.08,0.4)); +#60917 = VECTOR('',#60918,1.); +#60918 = DIRECTION('',(0.,0.,1.)); +#60919 = ORIENTED_EDGE('',*,*,#60776,.F.); +#60920 = PLANE('',#60921); +#60921 = AXIS2_PLACEMENT_3D('',#60922,#60923,#60924); +#60922 = CARTESIAN_POINT('',(-8.55,-4.08,0.4)); +#60923 = DIRECTION('',(0.,-1.,0.)); +#60924 = DIRECTION('',(-1.,0.,0.)); +#60925 = ADVANCED_FACE('',(#60926),#60932,.F.); +#60926 = FACE_BOUND('',#60927,.F.); +#60927 = EDGE_LOOP('',(#60928,#60929,#60930,#60931)); +#60928 = ORIENTED_EDGE('',*,*,#60808,.F.); +#60929 = ORIENTED_EDGE('',*,*,#60833,.T.); +#60930 = ORIENTED_EDGE('',*,*,#60877,.T.); +#60931 = ORIENTED_EDGE('',*,*,#60914,.F.); +#60932 = PLANE('',#60933); +#60933 = AXIS2_PLACEMENT_3D('',#60934,#60935,#60936); +#60934 = CARTESIAN_POINT('',(-9.,-3.18,0.4)); +#60935 = DIRECTION('',(1.,0.,0.)); +#60936 = DIRECTION('',(0.,-1.,0.)); +#60937 = MANIFOLD_SOLID_BREP('',#60938); +#60938 = CLOSED_SHELL('',(#60939,#60979,#61010,#61041,#61091,#61122, + #61155,#61172,#61196,#61227,#61244,#61273,#61297,#61323,#61347, + #61374,#61386,#61403)); +#60939 = ADVANCED_FACE('',(#60940),#60974,.T.); +#60940 = FACE_BOUND('',#60941,.T.); +#60941 = EDGE_LOOP('',(#60942,#60952,#60960,#60968)); +#60942 = ORIENTED_EDGE('',*,*,#60943,.T.); +#60943 = EDGE_CURVE('',#60944,#60946,#60948,.T.); +#60944 = VERTEX_POINT('',#60945); +#60945 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#60946 = VERTEX_POINT('',#60947); +#60947 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#60948 = LINE('',#60949,#60950); +#60949 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#60950 = VECTOR('',#60951,1.); +#60951 = DIRECTION('',(0.,0.,1.)); +#60952 = ORIENTED_EDGE('',*,*,#60953,.T.); +#60953 = EDGE_CURVE('',#60946,#60954,#60956,.T.); +#60954 = VERTEX_POINT('',#60955); +#60955 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#60956 = LINE('',#60957,#60958); +#60957 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#60958 = VECTOR('',#60959,1.); +#60959 = DIRECTION('',(1.,0.,0.)); +#60960 = ORIENTED_EDGE('',*,*,#60961,.F.); +#60961 = EDGE_CURVE('',#60962,#60954,#60964,.T.); +#60962 = VERTEX_POINT('',#60963); +#60963 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#60964 = LINE('',#60965,#60966); +#60965 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#60966 = VECTOR('',#60967,1.); +#60967 = DIRECTION('',(0.,0.,1.)); +#60968 = ORIENTED_EDGE('',*,*,#60969,.F.); +#60969 = EDGE_CURVE('',#60944,#60962,#60970,.T.); +#60970 = LINE('',#60971,#60972); +#60971 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#60972 = VECTOR('',#60973,1.); +#60973 = DIRECTION('',(1.,0.,0.)); +#60974 = PLANE('',#60975); +#60975 = AXIS2_PLACEMENT_3D('',#60976,#60977,#60978); +#60976 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#60977 = DIRECTION('',(0.,1.,0.)); +#60978 = DIRECTION('',(1.,0.,0.)); +#60979 = ADVANCED_FACE('',(#60980),#61005,.F.); +#60980 = FACE_BOUND('',#60981,.F.); +#60981 = EDGE_LOOP('',(#60982,#60990,#60991,#60999)); +#60982 = ORIENTED_EDGE('',*,*,#60983,.F.); +#60983 = EDGE_CURVE('',#60944,#60984,#60986,.T.); +#60984 = VERTEX_POINT('',#60985); +#60985 = CARTESIAN_POINT('',(-9.,-4.625,0.)); +#60986 = LINE('',#60987,#60988); +#60987 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#60988 = VECTOR('',#60989,1.); +#60989 = DIRECTION('',(0.,-1.,0.)); +#60990 = ORIENTED_EDGE('',*,*,#60943,.T.); +#60991 = ORIENTED_EDGE('',*,*,#60992,.T.); +#60992 = EDGE_CURVE('',#60946,#60993,#60995,.T.); +#60993 = VERTEX_POINT('',#60994); +#60994 = CARTESIAN_POINT('',(-9.,-4.625,0.4)); +#60995 = LINE('',#60996,#60997); +#60996 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#60997 = VECTOR('',#60998,1.); +#60998 = DIRECTION('',(0.,-1.,0.)); +#60999 = ORIENTED_EDGE('',*,*,#61000,.F.); +#61000 = EDGE_CURVE('',#60984,#60993,#61001,.T.); +#61001 = LINE('',#61002,#61003); +#61002 = CARTESIAN_POINT('',(-9.,-4.625,0.8)); +#61003 = VECTOR('',#61004,1.); +#61004 = DIRECTION('',(0.,0.,1.)); +#61005 = PLANE('',#61006); +#61006 = AXIS2_PLACEMENT_3D('',#61007,#61008,#61009); +#61007 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#61008 = DIRECTION('',(1.,0.,0.)); +#61009 = DIRECTION('',(0.,-1.,0.)); +#61010 = ADVANCED_FACE('',(#61011),#61036,.F.); +#61011 = FACE_BOUND('',#61012,.F.); +#61012 = EDGE_LOOP('',(#61013,#61021,#61029,#61035)); +#61013 = ORIENTED_EDGE('',*,*,#61014,.T.); +#61014 = EDGE_CURVE('',#60962,#61015,#61017,.T.); +#61015 = VERTEX_POINT('',#61016); +#61016 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#61017 = LINE('',#61018,#61019); +#61018 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#61019 = VECTOR('',#61020,1.); +#61020 = DIRECTION('',(1.,0.,0.)); +#61021 = ORIENTED_EDGE('',*,*,#61022,.T.); +#61022 = EDGE_CURVE('',#61015,#61023,#61025,.T.); +#61023 = VERTEX_POINT('',#61024); +#61024 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#61025 = LINE('',#61026,#61027); +#61026 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#61027 = VECTOR('',#61028,1.); +#61028 = DIRECTION('',(0.,0.,1.)); +#61029 = ORIENTED_EDGE('',*,*,#61030,.F.); +#61030 = EDGE_CURVE('',#60954,#61023,#61031,.T.); +#61031 = LINE('',#61032,#61033); +#61032 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#61033 = VECTOR('',#61034,1.); +#61034 = DIRECTION('',(1.,0.,0.)); +#61035 = ORIENTED_EDGE('',*,*,#60961,.F.); +#61036 = PLANE('',#61037); +#61037 = AXIS2_PLACEMENT_3D('',#61038,#61039,#61040); +#61038 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#61039 = DIRECTION('',(0.,-1.,0.)); +#61040 = DIRECTION('',(0.,0.,1.)); +#61041 = ADVANCED_FACE('',(#61042),#61086,.F.); +#61042 = FACE_BOUND('',#61043,.F.); +#61043 = EDGE_LOOP('',(#61044,#61045,#61046,#61055,#61064,#61072,#61080) + ); +#61044 = ORIENTED_EDGE('',*,*,#60969,.F.); +#61045 = ORIENTED_EDGE('',*,*,#60983,.T.); +#61046 = ORIENTED_EDGE('',*,*,#61047,.F.); +#61047 = EDGE_CURVE('',#61048,#60984,#61050,.T.); +#61048 = VERTEX_POINT('',#61049); +#61049 = CARTESIAN_POINT('',(-8.725,-4.9,0.)); +#61050 = CIRCLE('',#61051,0.275); +#61051 = AXIS2_PLACEMENT_3D('',#61052,#61053,#61054); +#61052 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#61053 = DIRECTION('',(0.,0.,1.)); +#61054 = DIRECTION('',(1.,0.,-0.)); +#61055 = ORIENTED_EDGE('',*,*,#61056,.F.); +#61056 = EDGE_CURVE('',#61057,#61048,#61059,.T.); +#61057 = VERTEX_POINT('',#61058); +#61058 = CARTESIAN_POINT('',(-9.,-5.175,0.)); +#61059 = CIRCLE('',#61060,0.275); +#61060 = AXIS2_PLACEMENT_3D('',#61061,#61062,#61063); +#61061 = CARTESIAN_POINT('',(-9.,-4.9,0.)); +#61062 = DIRECTION('',(0.,0.,1.)); +#61063 = DIRECTION('',(1.,0.,-0.)); +#61064 = ORIENTED_EDGE('',*,*,#61065,.T.); +#61065 = EDGE_CURVE('',#61057,#61066,#61068,.T.); +#61066 = VERTEX_POINT('',#61067); +#61067 = CARTESIAN_POINT('',(-9.,-5.35,0.)); +#61068 = LINE('',#61069,#61070); +#61069 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#61070 = VECTOR('',#61071,1.); +#61071 = DIRECTION('',(0.,-1.,0.)); +#61072 = ORIENTED_EDGE('',*,*,#61073,.F.); +#61073 = EDGE_CURVE('',#61074,#61066,#61076,.T.); +#61074 = VERTEX_POINT('',#61075); +#61075 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61076 = LINE('',#61077,#61078); +#61077 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61078 = VECTOR('',#61079,1.); +#61079 = DIRECTION('',(-1.,0.,0.)); +#61080 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61081 = EDGE_CURVE('',#60962,#61074,#61082,.T.); +#61082 = LINE('',#61083,#61084); +#61083 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#61084 = VECTOR('',#61085,1.); +#61085 = DIRECTION('',(0.,-1.,0.)); +#61086 = PLANE('',#61087); +#61087 = AXIS2_PLACEMENT_3D('',#61088,#61089,#61090); +#61088 = CARTESIAN_POINT('',(-8.775,-4.9,0.)); +#61089 = DIRECTION('',(0.,0.,1.)); +#61090 = DIRECTION('',(1.,0.,-0.)); +#61091 = ADVANCED_FACE('',(#61092),#61117,.T.); +#61092 = FACE_BOUND('',#61093,.T.); +#61093 = EDGE_LOOP('',(#61094,#61102,#61110,#61116)); +#61094 = ORIENTED_EDGE('',*,*,#61095,.T.); +#61095 = EDGE_CURVE('',#60946,#61096,#61098,.T.); +#61096 = VERTEX_POINT('',#61097); +#61097 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#61098 = LINE('',#61099,#61100); +#61099 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#61100 = VECTOR('',#61101,1.); +#61101 = DIRECTION('',(0.,0.,1.)); +#61102 = ORIENTED_EDGE('',*,*,#61103,.T.); +#61103 = EDGE_CURVE('',#61096,#61104,#61106,.T.); +#61104 = VERTEX_POINT('',#61105); +#61105 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#61106 = LINE('',#61107,#61108); +#61107 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#61108 = VECTOR('',#61109,1.); +#61109 = DIRECTION('',(1.,0.,0.)); +#61110 = ORIENTED_EDGE('',*,*,#61111,.F.); +#61111 = EDGE_CURVE('',#60954,#61104,#61112,.T.); +#61112 = LINE('',#61113,#61114); +#61113 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#61114 = VECTOR('',#61115,1.); +#61115 = DIRECTION('',(0.,0.,1.)); +#61116 = ORIENTED_EDGE('',*,*,#60953,.F.); +#61117 = PLANE('',#61118); +#61118 = AXIS2_PLACEMENT_3D('',#61119,#61120,#61121); +#61119 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#61120 = DIRECTION('',(0.,1.,0.)); +#61121 = DIRECTION('',(1.,0.,0.)); +#61122 = ADVANCED_FACE('',(#61123),#61150,.F.); +#61123 = FACE_BOUND('',#61124,.F.); +#61124 = EDGE_LOOP('',(#61125,#61136,#61142,#61143,#61144)); +#61125 = ORIENTED_EDGE('',*,*,#61126,.F.); +#61126 = EDGE_CURVE('',#61127,#61129,#61131,.T.); +#61127 = VERTEX_POINT('',#61128); +#61128 = CARTESIAN_POINT('',(-8.725,-4.9,0.8)); +#61129 = VERTEX_POINT('',#61130); +#61130 = CARTESIAN_POINT('',(-9.,-4.625,0.8)); +#61131 = CIRCLE('',#61132,0.275); +#61132 = AXIS2_PLACEMENT_3D('',#61133,#61134,#61135); +#61133 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#61134 = DIRECTION('',(0.,0.,1.)); +#61135 = DIRECTION('',(1.,0.,-0.)); +#61136 = ORIENTED_EDGE('',*,*,#61137,.T.); +#61137 = EDGE_CURVE('',#61127,#61048,#61138,.T.); +#61138 = LINE('',#61139,#61140); +#61139 = CARTESIAN_POINT('',(-8.725,-4.9,0.8)); +#61140 = VECTOR('',#61141,1.); +#61141 = DIRECTION('',(-0.,-0.,-1.)); +#61142 = ORIENTED_EDGE('',*,*,#61047,.T.); +#61143 = ORIENTED_EDGE('',*,*,#61000,.T.); +#61144 = ORIENTED_EDGE('',*,*,#61145,.T.); +#61145 = EDGE_CURVE('',#60993,#61129,#61146,.T.); +#61146 = LINE('',#61147,#61148); +#61147 = CARTESIAN_POINT('',(-9.,-4.625,0.8)); +#61148 = VECTOR('',#61149,1.); +#61149 = DIRECTION('',(0.,0.,1.)); +#61150 = CYLINDRICAL_SURFACE('',#61151,0.275); +#61151 = AXIS2_PLACEMENT_3D('',#61152,#61153,#61154); +#61152 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#61153 = DIRECTION('',(0.,0.,1.)); +#61154 = DIRECTION('',(1.,0.,-0.)); +#61155 = ADVANCED_FACE('',(#61156),#61167,.F.); +#61156 = FACE_BOUND('',#61157,.F.); +#61157 = EDGE_LOOP('',(#61158,#61159,#61160,#61166)); +#61158 = ORIENTED_EDGE('',*,*,#60992,.F.); +#61159 = ORIENTED_EDGE('',*,*,#61095,.T.); +#61160 = ORIENTED_EDGE('',*,*,#61161,.T.); +#61161 = EDGE_CURVE('',#61096,#61129,#61162,.T.); +#61162 = LINE('',#61163,#61164); +#61163 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#61164 = VECTOR('',#61165,1.); +#61165 = DIRECTION('',(0.,-1.,0.)); +#61166 = ORIENTED_EDGE('',*,*,#61145,.F.); +#61167 = PLANE('',#61168); +#61168 = AXIS2_PLACEMENT_3D('',#61169,#61170,#61171); +#61169 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#61170 = DIRECTION('',(1.,0.,0.)); +#61171 = DIRECTION('',(0.,-1.,0.)); +#61172 = ADVANCED_FACE('',(#61173),#61191,.T.); +#61173 = FACE_BOUND('',#61174,.T.); +#61174 = EDGE_LOOP('',(#61175,#61176,#61184,#61190)); +#61175 = ORIENTED_EDGE('',*,*,#61014,.T.); +#61176 = ORIENTED_EDGE('',*,*,#61177,.T.); +#61177 = EDGE_CURVE('',#61015,#61178,#61180,.T.); +#61178 = VERTEX_POINT('',#61179); +#61179 = CARTESIAN_POINT('',(-8.15,-5.35,0.)); +#61180 = LINE('',#61181,#61182); +#61181 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#61182 = VECTOR('',#61183,1.); +#61183 = DIRECTION('',(0.,-1.,0.)); +#61184 = ORIENTED_EDGE('',*,*,#61185,.F.); +#61185 = EDGE_CURVE('',#61074,#61178,#61186,.T.); +#61186 = LINE('',#61187,#61188); +#61187 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61188 = VECTOR('',#61189,1.); +#61189 = DIRECTION('',(1.,0.,0.)); +#61190 = ORIENTED_EDGE('',*,*,#61081,.F.); +#61191 = PLANE('',#61192); +#61192 = AXIS2_PLACEMENT_3D('',#61193,#61194,#61195); +#61193 = CARTESIAN_POINT('',(-8.55,-4.45,0.)); +#61194 = DIRECTION('',(0.,0.,-1.)); +#61195 = DIRECTION('',(0.,-1.,0.)); +#61196 = ADVANCED_FACE('',(#61197),#61222,.F.); +#61197 = FACE_BOUND('',#61198,.F.); +#61198 = EDGE_LOOP('',(#61199,#61200,#61208,#61216)); +#61199 = ORIENTED_EDGE('',*,*,#61030,.T.); +#61200 = ORIENTED_EDGE('',*,*,#61201,.T.); +#61201 = EDGE_CURVE('',#61023,#61202,#61204,.T.); +#61202 = VERTEX_POINT('',#61203); +#61203 = CARTESIAN_POINT('',(-8.15,-5.35,0.4)); +#61204 = LINE('',#61205,#61206); +#61205 = CARTESIAN_POINT('',(-8.15,-4.45,0.4)); +#61206 = VECTOR('',#61207,1.); +#61207 = DIRECTION('',(0.,-1.,0.)); +#61208 = ORIENTED_EDGE('',*,*,#61209,.F.); +#61209 = EDGE_CURVE('',#61210,#61202,#61212,.T.); +#61210 = VERTEX_POINT('',#61211); +#61211 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#61212 = LINE('',#61213,#61214); +#61213 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#61214 = VECTOR('',#61215,1.); +#61215 = DIRECTION('',(1.,0.,0.)); +#61216 = ORIENTED_EDGE('',*,*,#61217,.F.); +#61217 = EDGE_CURVE('',#60954,#61210,#61218,.T.); +#61218 = LINE('',#61219,#61220); +#61219 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#61220 = VECTOR('',#61221,1.); +#61221 = DIRECTION('',(0.,-1.,0.)); +#61222 = PLANE('',#61223); +#61223 = AXIS2_PLACEMENT_3D('',#61224,#61225,#61226); +#61224 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#61225 = DIRECTION('',(0.,0.,-1.)); +#61226 = DIRECTION('',(0.,-1.,0.)); +#61227 = ADVANCED_FACE('',(#61228),#61239,.T.); +#61228 = FACE_BOUND('',#61229,.T.); +#61229 = EDGE_LOOP('',(#61230,#61231,#61232,#61238)); +#61230 = ORIENTED_EDGE('',*,*,#61022,.T.); +#61231 = ORIENTED_EDGE('',*,*,#61201,.T.); +#61232 = ORIENTED_EDGE('',*,*,#61233,.F.); +#61233 = EDGE_CURVE('',#61178,#61202,#61234,.T.); +#61234 = LINE('',#61235,#61236); +#61235 = CARTESIAN_POINT('',(-8.15,-5.35,0.)); +#61236 = VECTOR('',#61237,1.); +#61237 = DIRECTION('',(0.,0.,1.)); +#61238 = ORIENTED_EDGE('',*,*,#61177,.F.); +#61239 = PLANE('',#61240); +#61240 = AXIS2_PLACEMENT_3D('',#61241,#61242,#61243); +#61241 = CARTESIAN_POINT('',(-8.15,-4.45,0.)); +#61242 = DIRECTION('',(1.,0.,0.)); +#61243 = DIRECTION('',(0.,-1.,0.)); +#61244 = ADVANCED_FACE('',(#61245),#61268,.T.); +#61245 = FACE_BOUND('',#61246,.T.); +#61246 = EDGE_LOOP('',(#61247,#61253,#61261,#61267)); +#61247 = ORIENTED_EDGE('',*,*,#61248,.T.); +#61248 = EDGE_CURVE('',#61074,#61210,#61249,.T.); +#61249 = LINE('',#61250,#61251); +#61250 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61251 = VECTOR('',#61252,1.); +#61252 = DIRECTION('',(0.,0.,1.)); +#61253 = ORIENTED_EDGE('',*,*,#61254,.T.); +#61254 = EDGE_CURVE('',#61210,#61255,#61257,.T.); +#61255 = VERTEX_POINT('',#61256); +#61256 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#61257 = LINE('',#61258,#61259); +#61258 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#61259 = VECTOR('',#61260,1.); +#61260 = DIRECTION('',(-1.,0.,0.)); +#61261 = ORIENTED_EDGE('',*,*,#61262,.F.); +#61262 = EDGE_CURVE('',#61066,#61255,#61263,.T.); +#61263 = LINE('',#61264,#61265); +#61264 = CARTESIAN_POINT('',(-9.,-5.35,0.)); +#61265 = VECTOR('',#61266,1.); +#61266 = DIRECTION('',(0.,0.,1.)); +#61267 = ORIENTED_EDGE('',*,*,#61073,.F.); +#61268 = PLANE('',#61269); +#61269 = AXIS2_PLACEMENT_3D('',#61270,#61271,#61272); +#61270 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61271 = DIRECTION('',(0.,-1.,0.)); +#61272 = DIRECTION('',(-1.,0.,0.)); +#61273 = ADVANCED_FACE('',(#61274),#61292,.F.); +#61274 = FACE_BOUND('',#61275,.F.); +#61275 = EDGE_LOOP('',(#61276,#61277,#61285,#61291)); +#61276 = ORIENTED_EDGE('',*,*,#61065,.F.); +#61277 = ORIENTED_EDGE('',*,*,#61278,.T.); +#61278 = EDGE_CURVE('',#61057,#61279,#61281,.T.); +#61279 = VERTEX_POINT('',#61280); +#61280 = CARTESIAN_POINT('',(-9.,-5.175,0.4)); +#61281 = LINE('',#61282,#61283); +#61282 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#61283 = VECTOR('',#61284,1.); +#61284 = DIRECTION('',(0.,0.,1.)); +#61285 = ORIENTED_EDGE('',*,*,#61286,.T.); +#61286 = EDGE_CURVE('',#61279,#61255,#61287,.T.); +#61287 = LINE('',#61288,#61289); +#61288 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#61289 = VECTOR('',#61290,1.); +#61290 = DIRECTION('',(0.,-1.,0.)); +#61291 = ORIENTED_EDGE('',*,*,#61262,.F.); +#61292 = PLANE('',#61293); +#61293 = AXIS2_PLACEMENT_3D('',#61294,#61295,#61296); +#61294 = CARTESIAN_POINT('',(-9.,-4.45,0.)); +#61295 = DIRECTION('',(1.,0.,0.)); +#61296 = DIRECTION('',(0.,-1.,0.)); +#61297 = ADVANCED_FACE('',(#61298),#61318,.F.); +#61298 = FACE_BOUND('',#61299,.F.); +#61299 = EDGE_LOOP('',(#61300,#61301,#61310,#61316,#61317)); +#61300 = ORIENTED_EDGE('',*,*,#61137,.F.); +#61301 = ORIENTED_EDGE('',*,*,#61302,.F.); +#61302 = EDGE_CURVE('',#61303,#61127,#61305,.T.); +#61303 = VERTEX_POINT('',#61304); +#61304 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#61305 = CIRCLE('',#61306,0.275); +#61306 = AXIS2_PLACEMENT_3D('',#61307,#61308,#61309); +#61307 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#61308 = DIRECTION('',(0.,0.,1.)); +#61309 = DIRECTION('',(1.,0.,-0.)); +#61310 = ORIENTED_EDGE('',*,*,#61311,.F.); +#61311 = EDGE_CURVE('',#61279,#61303,#61312,.T.); +#61312 = LINE('',#61313,#61314); +#61313 = CARTESIAN_POINT('',(-9.,-5.175,0.8)); +#61314 = VECTOR('',#61315,1.); +#61315 = DIRECTION('',(0.,0.,1.)); +#61316 = ORIENTED_EDGE('',*,*,#61278,.F.); +#61317 = ORIENTED_EDGE('',*,*,#61056,.T.); +#61318 = CYLINDRICAL_SURFACE('',#61319,0.275); +#61319 = AXIS2_PLACEMENT_3D('',#61320,#61321,#61322); +#61320 = CARTESIAN_POINT('',(-9.,-4.9,0.8)); +#61321 = DIRECTION('',(0.,0.,1.)); +#61322 = DIRECTION('',(1.,0.,-0.)); +#61323 = ADVANCED_FACE('',(#61324),#61342,.T.); +#61324 = FACE_BOUND('',#61325,.T.); +#61325 = EDGE_LOOP('',(#61326,#61327,#61335,#61341)); +#61326 = ORIENTED_EDGE('',*,*,#61111,.T.); +#61327 = ORIENTED_EDGE('',*,*,#61328,.T.); +#61328 = EDGE_CURVE('',#61104,#61329,#61331,.T.); +#61329 = VERTEX_POINT('',#61330); +#61330 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#61331 = LINE('',#61332,#61333); +#61332 = CARTESIAN_POINT('',(-8.55,-4.45,0.8)); +#61333 = VECTOR('',#61334,1.); +#61334 = DIRECTION('',(0.,-1.,0.)); +#61335 = ORIENTED_EDGE('',*,*,#61336,.F.); +#61336 = EDGE_CURVE('',#61210,#61329,#61337,.T.); +#61337 = LINE('',#61338,#61339); +#61338 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#61339 = VECTOR('',#61340,1.); +#61340 = DIRECTION('',(0.,0.,1.)); +#61341 = ORIENTED_EDGE('',*,*,#61217,.F.); +#61342 = PLANE('',#61343); +#61343 = AXIS2_PLACEMENT_3D('',#61344,#61345,#61346); +#61344 = CARTESIAN_POINT('',(-8.55,-4.45,0.4)); +#61345 = DIRECTION('',(1.,0.,0.)); +#61346 = DIRECTION('',(0.,-1.,0.)); +#61347 = ADVANCED_FACE('',(#61348),#61369,.T.); +#61348 = FACE_BOUND('',#61349,.T.); +#61349 = EDGE_LOOP('',(#61350,#61351,#61352,#61353,#61354,#61362,#61368) + ); +#61350 = ORIENTED_EDGE('',*,*,#61103,.F.); +#61351 = ORIENTED_EDGE('',*,*,#61161,.T.); +#61352 = ORIENTED_EDGE('',*,*,#61126,.F.); +#61353 = ORIENTED_EDGE('',*,*,#61302,.F.); +#61354 = ORIENTED_EDGE('',*,*,#61355,.T.); +#61355 = EDGE_CURVE('',#61303,#61356,#61358,.T.); +#61356 = VERTEX_POINT('',#61357); +#61357 = CARTESIAN_POINT('',(-9.,-5.35,0.8)); +#61358 = LINE('',#61359,#61360); +#61359 = CARTESIAN_POINT('',(-9.,-4.45,0.8)); +#61360 = VECTOR('',#61361,1.); +#61361 = DIRECTION('',(0.,-1.,0.)); +#61362 = ORIENTED_EDGE('',*,*,#61363,.F.); +#61363 = EDGE_CURVE('',#61329,#61356,#61364,.T.); +#61364 = LINE('',#61365,#61366); +#61365 = CARTESIAN_POINT('',(-8.55,-5.35,0.8)); +#61366 = VECTOR('',#61367,1.); +#61367 = DIRECTION('',(-1.,0.,0.)); +#61368 = ORIENTED_EDGE('',*,*,#61328,.F.); +#61369 = PLANE('',#61370); +#61370 = AXIS2_PLACEMENT_3D('',#61371,#61372,#61373); +#61371 = CARTESIAN_POINT('',(-8.775,-4.9,0.8)); +#61372 = DIRECTION('',(0.,0.,1.)); +#61373 = DIRECTION('',(1.,0.,-0.)); +#61374 = ADVANCED_FACE('',(#61375),#61381,.T.); +#61375 = FACE_BOUND('',#61376,.T.); +#61376 = EDGE_LOOP('',(#61377,#61378,#61379,#61380)); +#61377 = ORIENTED_EDGE('',*,*,#61185,.T.); +#61378 = ORIENTED_EDGE('',*,*,#61233,.T.); +#61379 = ORIENTED_EDGE('',*,*,#61209,.F.); +#61380 = ORIENTED_EDGE('',*,*,#61248,.F.); +#61381 = PLANE('',#61382); +#61382 = AXIS2_PLACEMENT_3D('',#61383,#61384,#61385); +#61383 = CARTESIAN_POINT('',(-8.55,-5.35,0.)); +#61384 = DIRECTION('',(0.,-1.,0.)); +#61385 = DIRECTION('',(0.,0.,1.)); +#61386 = ADVANCED_FACE('',(#61387),#61398,.T.); +#61387 = FACE_BOUND('',#61388,.T.); +#61388 = EDGE_LOOP('',(#61389,#61390,#61391,#61397)); +#61389 = ORIENTED_EDGE('',*,*,#61336,.T.); +#61390 = ORIENTED_EDGE('',*,*,#61363,.T.); +#61391 = ORIENTED_EDGE('',*,*,#61392,.F.); +#61392 = EDGE_CURVE('',#61255,#61356,#61393,.T.); +#61393 = LINE('',#61394,#61395); +#61394 = CARTESIAN_POINT('',(-9.,-5.35,0.4)); +#61395 = VECTOR('',#61396,1.); +#61396 = DIRECTION('',(0.,0.,1.)); +#61397 = ORIENTED_EDGE('',*,*,#61254,.F.); +#61398 = PLANE('',#61399); +#61399 = AXIS2_PLACEMENT_3D('',#61400,#61401,#61402); +#61400 = CARTESIAN_POINT('',(-8.55,-5.35,0.4)); +#61401 = DIRECTION('',(0.,-1.,0.)); +#61402 = DIRECTION('',(-1.,0.,0.)); +#61403 = ADVANCED_FACE('',(#61404),#61410,.F.); +#61404 = FACE_BOUND('',#61405,.F.); +#61405 = EDGE_LOOP('',(#61406,#61407,#61408,#61409)); +#61406 = ORIENTED_EDGE('',*,*,#61286,.F.); +#61407 = ORIENTED_EDGE('',*,*,#61311,.T.); +#61408 = ORIENTED_EDGE('',*,*,#61355,.T.); +#61409 = ORIENTED_EDGE('',*,*,#61392,.F.); +#61410 = PLANE('',#61411); +#61411 = AXIS2_PLACEMENT_3D('',#61412,#61413,#61414); +#61412 = CARTESIAN_POINT('',(-9.,-4.45,0.4)); +#61413 = DIRECTION('',(1.,0.,0.)); +#61414 = DIRECTION('',(0.,-1.,0.)); +#61415 = MANIFOLD_SOLID_BREP('',#61416); +#61416 = CLOSED_SHELL('',(#61417,#61457,#61488,#61519,#61569,#61600, + #61633,#61650,#61674,#61705,#61722,#61751,#61775,#61801,#61825, + #61852,#61864,#61881)); +#61417 = ADVANCED_FACE('',(#61418),#61452,.T.); +#61418 = FACE_BOUND('',#61419,.T.); +#61419 = EDGE_LOOP('',(#61420,#61430,#61438,#61446)); +#61420 = ORIENTED_EDGE('',*,*,#61421,.T.); +#61421 = EDGE_CURVE('',#61422,#61424,#61426,.T.); +#61422 = VERTEX_POINT('',#61423); +#61423 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61424 = VERTEX_POINT('',#61425); +#61425 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61426 = LINE('',#61427,#61428); +#61427 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61428 = VECTOR('',#61429,1.); +#61429 = DIRECTION('',(0.,0.,1.)); +#61430 = ORIENTED_EDGE('',*,*,#61431,.T.); +#61431 = EDGE_CURVE('',#61424,#61432,#61434,.T.); +#61432 = VERTEX_POINT('',#61433); +#61433 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61434 = LINE('',#61435,#61436); +#61435 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61436 = VECTOR('',#61437,1.); +#61437 = DIRECTION('',(1.,0.,0.)); +#61438 = ORIENTED_EDGE('',*,*,#61439,.F.); +#61439 = EDGE_CURVE('',#61440,#61432,#61442,.T.); +#61440 = VERTEX_POINT('',#61441); +#61441 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61442 = LINE('',#61443,#61444); +#61443 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61444 = VECTOR('',#61445,1.); +#61445 = DIRECTION('',(0.,0.,1.)); +#61446 = ORIENTED_EDGE('',*,*,#61447,.F.); +#61447 = EDGE_CURVE('',#61422,#61440,#61448,.T.); +#61448 = LINE('',#61449,#61450); +#61449 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61450 = VECTOR('',#61451,1.); +#61451 = DIRECTION('',(1.,0.,0.)); +#61452 = PLANE('',#61453); +#61453 = AXIS2_PLACEMENT_3D('',#61454,#61455,#61456); +#61454 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61455 = DIRECTION('',(0.,1.,0.)); +#61456 = DIRECTION('',(1.,0.,0.)); +#61457 = ADVANCED_FACE('',(#61458),#61483,.F.); +#61458 = FACE_BOUND('',#61459,.F.); +#61459 = EDGE_LOOP('',(#61460,#61468,#61469,#61477)); +#61460 = ORIENTED_EDGE('',*,*,#61461,.F.); +#61461 = EDGE_CURVE('',#61422,#61462,#61464,.T.); +#61462 = VERTEX_POINT('',#61463); +#61463 = CARTESIAN_POINT('',(-9.,-5.895,0.)); +#61464 = LINE('',#61465,#61466); +#61465 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61466 = VECTOR('',#61467,1.); +#61467 = DIRECTION('',(0.,-1.,0.)); +#61468 = ORIENTED_EDGE('',*,*,#61421,.T.); +#61469 = ORIENTED_EDGE('',*,*,#61470,.T.); +#61470 = EDGE_CURVE('',#61424,#61471,#61473,.T.); +#61471 = VERTEX_POINT('',#61472); +#61472 = CARTESIAN_POINT('',(-9.,-5.895,0.4)); +#61473 = LINE('',#61474,#61475); +#61474 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61475 = VECTOR('',#61476,1.); +#61476 = DIRECTION('',(0.,-1.,0.)); +#61477 = ORIENTED_EDGE('',*,*,#61478,.F.); +#61478 = EDGE_CURVE('',#61462,#61471,#61479,.T.); +#61479 = LINE('',#61480,#61481); +#61480 = CARTESIAN_POINT('',(-9.,-5.895,0.8)); +#61481 = VECTOR('',#61482,1.); +#61482 = DIRECTION('',(0.,0.,1.)); +#61483 = PLANE('',#61484); +#61484 = AXIS2_PLACEMENT_3D('',#61485,#61486,#61487); +#61485 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61486 = DIRECTION('',(1.,0.,0.)); +#61487 = DIRECTION('',(0.,-1.,0.)); +#61488 = ADVANCED_FACE('',(#61489),#61514,.F.); +#61489 = FACE_BOUND('',#61490,.F.); +#61490 = EDGE_LOOP('',(#61491,#61499,#61507,#61513)); +#61491 = ORIENTED_EDGE('',*,*,#61492,.T.); +#61492 = EDGE_CURVE('',#61440,#61493,#61495,.T.); +#61493 = VERTEX_POINT('',#61494); +#61494 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#61495 = LINE('',#61496,#61497); +#61496 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61497 = VECTOR('',#61498,1.); +#61498 = DIRECTION('',(1.,0.,0.)); +#61499 = ORIENTED_EDGE('',*,*,#61500,.T.); +#61500 = EDGE_CURVE('',#61493,#61501,#61503,.T.); +#61501 = VERTEX_POINT('',#61502); +#61502 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#61503 = LINE('',#61504,#61505); +#61504 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#61505 = VECTOR('',#61506,1.); +#61506 = DIRECTION('',(0.,0.,1.)); +#61507 = ORIENTED_EDGE('',*,*,#61508,.F.); +#61508 = EDGE_CURVE('',#61432,#61501,#61509,.T.); +#61509 = LINE('',#61510,#61511); +#61510 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61511 = VECTOR('',#61512,1.); +#61512 = DIRECTION('',(1.,0.,0.)); +#61513 = ORIENTED_EDGE('',*,*,#61439,.F.); +#61514 = PLANE('',#61515); +#61515 = AXIS2_PLACEMENT_3D('',#61516,#61517,#61518); +#61516 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61517 = DIRECTION('',(0.,-1.,0.)); +#61518 = DIRECTION('',(0.,0.,1.)); +#61519 = ADVANCED_FACE('',(#61520),#61564,.F.); +#61520 = FACE_BOUND('',#61521,.F.); +#61521 = EDGE_LOOP('',(#61522,#61523,#61524,#61533,#61542,#61550,#61558) + ); +#61522 = ORIENTED_EDGE('',*,*,#61447,.F.); +#61523 = ORIENTED_EDGE('',*,*,#61461,.T.); +#61524 = ORIENTED_EDGE('',*,*,#61525,.F.); +#61525 = EDGE_CURVE('',#61526,#61462,#61528,.T.); +#61526 = VERTEX_POINT('',#61527); +#61527 = CARTESIAN_POINT('',(-8.725,-6.17,0.)); +#61528 = CIRCLE('',#61529,0.275); +#61529 = AXIS2_PLACEMENT_3D('',#61530,#61531,#61532); +#61530 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#61531 = DIRECTION('',(0.,0.,1.)); +#61532 = DIRECTION('',(1.,0.,-0.)); +#61533 = ORIENTED_EDGE('',*,*,#61534,.F.); +#61534 = EDGE_CURVE('',#61535,#61526,#61537,.T.); +#61535 = VERTEX_POINT('',#61536); +#61536 = CARTESIAN_POINT('',(-9.,-6.445,0.)); +#61537 = CIRCLE('',#61538,0.275); +#61538 = AXIS2_PLACEMENT_3D('',#61539,#61540,#61541); +#61539 = CARTESIAN_POINT('',(-9.,-6.17,0.)); +#61540 = DIRECTION('',(0.,0.,1.)); +#61541 = DIRECTION('',(1.,0.,-0.)); +#61542 = ORIENTED_EDGE('',*,*,#61543,.T.); +#61543 = EDGE_CURVE('',#61535,#61544,#61546,.T.); +#61544 = VERTEX_POINT('',#61545); +#61545 = CARTESIAN_POINT('',(-9.,-6.62,0.)); +#61546 = LINE('',#61547,#61548); +#61547 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61548 = VECTOR('',#61549,1.); +#61549 = DIRECTION('',(0.,-1.,0.)); +#61550 = ORIENTED_EDGE('',*,*,#61551,.F.); +#61551 = EDGE_CURVE('',#61552,#61544,#61554,.T.); +#61552 = VERTEX_POINT('',#61553); +#61553 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61554 = LINE('',#61555,#61556); +#61555 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61556 = VECTOR('',#61557,1.); +#61557 = DIRECTION('',(-1.,0.,0.)); +#61558 = ORIENTED_EDGE('',*,*,#61559,.F.); +#61559 = EDGE_CURVE('',#61440,#61552,#61560,.T.); +#61560 = LINE('',#61561,#61562); +#61561 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61562 = VECTOR('',#61563,1.); +#61563 = DIRECTION('',(0.,-1.,0.)); +#61564 = PLANE('',#61565); +#61565 = AXIS2_PLACEMENT_3D('',#61566,#61567,#61568); +#61566 = CARTESIAN_POINT('',(-8.775,-6.17,0.)); +#61567 = DIRECTION('',(0.,0.,1.)); +#61568 = DIRECTION('',(1.,0.,-0.)); +#61569 = ADVANCED_FACE('',(#61570),#61595,.T.); +#61570 = FACE_BOUND('',#61571,.T.); +#61571 = EDGE_LOOP('',(#61572,#61580,#61588,#61594)); +#61572 = ORIENTED_EDGE('',*,*,#61573,.T.); +#61573 = EDGE_CURVE('',#61424,#61574,#61576,.T.); +#61574 = VERTEX_POINT('',#61575); +#61575 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#61576 = LINE('',#61577,#61578); +#61577 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61578 = VECTOR('',#61579,1.); +#61579 = DIRECTION('',(0.,0.,1.)); +#61580 = ORIENTED_EDGE('',*,*,#61581,.T.); +#61581 = EDGE_CURVE('',#61574,#61582,#61584,.T.); +#61582 = VERTEX_POINT('',#61583); +#61583 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#61584 = LINE('',#61585,#61586); +#61585 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#61586 = VECTOR('',#61587,1.); +#61587 = DIRECTION('',(1.,0.,0.)); +#61588 = ORIENTED_EDGE('',*,*,#61589,.F.); +#61589 = EDGE_CURVE('',#61432,#61582,#61590,.T.); +#61590 = LINE('',#61591,#61592); +#61591 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61592 = VECTOR('',#61593,1.); +#61593 = DIRECTION('',(0.,0.,1.)); +#61594 = ORIENTED_EDGE('',*,*,#61431,.F.); +#61595 = PLANE('',#61596); +#61596 = AXIS2_PLACEMENT_3D('',#61597,#61598,#61599); +#61597 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61598 = DIRECTION('',(0.,1.,0.)); +#61599 = DIRECTION('',(1.,0.,0.)); +#61600 = ADVANCED_FACE('',(#61601),#61628,.F.); +#61601 = FACE_BOUND('',#61602,.F.); +#61602 = EDGE_LOOP('',(#61603,#61614,#61620,#61621,#61622)); +#61603 = ORIENTED_EDGE('',*,*,#61604,.F.); +#61604 = EDGE_CURVE('',#61605,#61607,#61609,.T.); +#61605 = VERTEX_POINT('',#61606); +#61606 = CARTESIAN_POINT('',(-8.725,-6.17,0.8)); +#61607 = VERTEX_POINT('',#61608); +#61608 = CARTESIAN_POINT('',(-9.,-5.895,0.8)); +#61609 = CIRCLE('',#61610,0.275); +#61610 = AXIS2_PLACEMENT_3D('',#61611,#61612,#61613); +#61611 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#61612 = DIRECTION('',(0.,0.,1.)); +#61613 = DIRECTION('',(1.,0.,-0.)); +#61614 = ORIENTED_EDGE('',*,*,#61615,.T.); +#61615 = EDGE_CURVE('',#61605,#61526,#61616,.T.); +#61616 = LINE('',#61617,#61618); +#61617 = CARTESIAN_POINT('',(-8.725,-6.17,0.8)); +#61618 = VECTOR('',#61619,1.); +#61619 = DIRECTION('',(-0.,-0.,-1.)); +#61620 = ORIENTED_EDGE('',*,*,#61525,.T.); +#61621 = ORIENTED_EDGE('',*,*,#61478,.T.); +#61622 = ORIENTED_EDGE('',*,*,#61623,.T.); +#61623 = EDGE_CURVE('',#61471,#61607,#61624,.T.); +#61624 = LINE('',#61625,#61626); +#61625 = CARTESIAN_POINT('',(-9.,-5.895,0.8)); +#61626 = VECTOR('',#61627,1.); +#61627 = DIRECTION('',(0.,0.,1.)); +#61628 = CYLINDRICAL_SURFACE('',#61629,0.275); +#61629 = AXIS2_PLACEMENT_3D('',#61630,#61631,#61632); +#61630 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#61631 = DIRECTION('',(0.,0.,1.)); +#61632 = DIRECTION('',(1.,0.,-0.)); +#61633 = ADVANCED_FACE('',(#61634),#61645,.F.); +#61634 = FACE_BOUND('',#61635,.F.); +#61635 = EDGE_LOOP('',(#61636,#61637,#61638,#61644)); +#61636 = ORIENTED_EDGE('',*,*,#61470,.F.); +#61637 = ORIENTED_EDGE('',*,*,#61573,.T.); +#61638 = ORIENTED_EDGE('',*,*,#61639,.T.); +#61639 = EDGE_CURVE('',#61574,#61607,#61640,.T.); +#61640 = LINE('',#61641,#61642); +#61641 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#61642 = VECTOR('',#61643,1.); +#61643 = DIRECTION('',(0.,-1.,0.)); +#61644 = ORIENTED_EDGE('',*,*,#61623,.F.); +#61645 = PLANE('',#61646); +#61646 = AXIS2_PLACEMENT_3D('',#61647,#61648,#61649); +#61647 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61648 = DIRECTION('',(1.,0.,0.)); +#61649 = DIRECTION('',(0.,-1.,0.)); +#61650 = ADVANCED_FACE('',(#61651),#61669,.T.); +#61651 = FACE_BOUND('',#61652,.T.); +#61652 = EDGE_LOOP('',(#61653,#61654,#61662,#61668)); +#61653 = ORIENTED_EDGE('',*,*,#61492,.T.); +#61654 = ORIENTED_EDGE('',*,*,#61655,.T.); +#61655 = EDGE_CURVE('',#61493,#61656,#61658,.T.); +#61656 = VERTEX_POINT('',#61657); +#61657 = CARTESIAN_POINT('',(-8.15,-6.62,0.)); +#61658 = LINE('',#61659,#61660); +#61659 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#61660 = VECTOR('',#61661,1.); +#61661 = DIRECTION('',(0.,-1.,0.)); +#61662 = ORIENTED_EDGE('',*,*,#61663,.F.); +#61663 = EDGE_CURVE('',#61552,#61656,#61664,.T.); +#61664 = LINE('',#61665,#61666); +#61665 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61666 = VECTOR('',#61667,1.); +#61667 = DIRECTION('',(1.,0.,0.)); +#61668 = ORIENTED_EDGE('',*,*,#61559,.F.); +#61669 = PLANE('',#61670); +#61670 = AXIS2_PLACEMENT_3D('',#61671,#61672,#61673); +#61671 = CARTESIAN_POINT('',(-8.55,-5.72,0.)); +#61672 = DIRECTION('',(0.,0.,-1.)); +#61673 = DIRECTION('',(0.,-1.,0.)); +#61674 = ADVANCED_FACE('',(#61675),#61700,.F.); +#61675 = FACE_BOUND('',#61676,.F.); +#61676 = EDGE_LOOP('',(#61677,#61678,#61686,#61694)); +#61677 = ORIENTED_EDGE('',*,*,#61508,.T.); +#61678 = ORIENTED_EDGE('',*,*,#61679,.T.); +#61679 = EDGE_CURVE('',#61501,#61680,#61682,.T.); +#61680 = VERTEX_POINT('',#61681); +#61681 = CARTESIAN_POINT('',(-8.15,-6.62,0.4)); +#61682 = LINE('',#61683,#61684); +#61683 = CARTESIAN_POINT('',(-8.15,-5.72,0.4)); +#61684 = VECTOR('',#61685,1.); +#61685 = DIRECTION('',(0.,-1.,0.)); +#61686 = ORIENTED_EDGE('',*,*,#61687,.F.); +#61687 = EDGE_CURVE('',#61688,#61680,#61690,.T.); +#61688 = VERTEX_POINT('',#61689); +#61689 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#61690 = LINE('',#61691,#61692); +#61691 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#61692 = VECTOR('',#61693,1.); +#61693 = DIRECTION('',(1.,0.,0.)); +#61694 = ORIENTED_EDGE('',*,*,#61695,.F.); +#61695 = EDGE_CURVE('',#61432,#61688,#61696,.T.); +#61696 = LINE('',#61697,#61698); +#61697 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61698 = VECTOR('',#61699,1.); +#61699 = DIRECTION('',(0.,-1.,0.)); +#61700 = PLANE('',#61701); +#61701 = AXIS2_PLACEMENT_3D('',#61702,#61703,#61704); +#61702 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61703 = DIRECTION('',(0.,0.,-1.)); +#61704 = DIRECTION('',(0.,-1.,0.)); +#61705 = ADVANCED_FACE('',(#61706),#61717,.T.); +#61706 = FACE_BOUND('',#61707,.T.); +#61707 = EDGE_LOOP('',(#61708,#61709,#61710,#61716)); +#61708 = ORIENTED_EDGE('',*,*,#61500,.T.); +#61709 = ORIENTED_EDGE('',*,*,#61679,.T.); +#61710 = ORIENTED_EDGE('',*,*,#61711,.F.); +#61711 = EDGE_CURVE('',#61656,#61680,#61712,.T.); +#61712 = LINE('',#61713,#61714); +#61713 = CARTESIAN_POINT('',(-8.15,-6.62,0.)); +#61714 = VECTOR('',#61715,1.); +#61715 = DIRECTION('',(0.,0.,1.)); +#61716 = ORIENTED_EDGE('',*,*,#61655,.F.); +#61717 = PLANE('',#61718); +#61718 = AXIS2_PLACEMENT_3D('',#61719,#61720,#61721); +#61719 = CARTESIAN_POINT('',(-8.15,-5.72,0.)); +#61720 = DIRECTION('',(1.,0.,0.)); +#61721 = DIRECTION('',(0.,-1.,0.)); +#61722 = ADVANCED_FACE('',(#61723),#61746,.T.); +#61723 = FACE_BOUND('',#61724,.T.); +#61724 = EDGE_LOOP('',(#61725,#61731,#61739,#61745)); +#61725 = ORIENTED_EDGE('',*,*,#61726,.T.); +#61726 = EDGE_CURVE('',#61552,#61688,#61727,.T.); +#61727 = LINE('',#61728,#61729); +#61728 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61729 = VECTOR('',#61730,1.); +#61730 = DIRECTION('',(0.,0.,1.)); +#61731 = ORIENTED_EDGE('',*,*,#61732,.T.); +#61732 = EDGE_CURVE('',#61688,#61733,#61735,.T.); +#61733 = VERTEX_POINT('',#61734); +#61734 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#61735 = LINE('',#61736,#61737); +#61736 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#61737 = VECTOR('',#61738,1.); +#61738 = DIRECTION('',(-1.,0.,0.)); +#61739 = ORIENTED_EDGE('',*,*,#61740,.F.); +#61740 = EDGE_CURVE('',#61544,#61733,#61741,.T.); +#61741 = LINE('',#61742,#61743); +#61742 = CARTESIAN_POINT('',(-9.,-6.62,0.)); +#61743 = VECTOR('',#61744,1.); +#61744 = DIRECTION('',(0.,0.,1.)); +#61745 = ORIENTED_EDGE('',*,*,#61551,.F.); +#61746 = PLANE('',#61747); +#61747 = AXIS2_PLACEMENT_3D('',#61748,#61749,#61750); +#61748 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61749 = DIRECTION('',(0.,-1.,0.)); +#61750 = DIRECTION('',(-1.,0.,0.)); +#61751 = ADVANCED_FACE('',(#61752),#61770,.F.); +#61752 = FACE_BOUND('',#61753,.F.); +#61753 = EDGE_LOOP('',(#61754,#61755,#61763,#61769)); +#61754 = ORIENTED_EDGE('',*,*,#61543,.F.); +#61755 = ORIENTED_EDGE('',*,*,#61756,.T.); +#61756 = EDGE_CURVE('',#61535,#61757,#61759,.T.); +#61757 = VERTEX_POINT('',#61758); +#61758 = CARTESIAN_POINT('',(-9.,-6.445,0.4)); +#61759 = LINE('',#61760,#61761); +#61760 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#61761 = VECTOR('',#61762,1.); +#61762 = DIRECTION('',(0.,0.,1.)); +#61763 = ORIENTED_EDGE('',*,*,#61764,.T.); +#61764 = EDGE_CURVE('',#61757,#61733,#61765,.T.); +#61765 = LINE('',#61766,#61767); +#61766 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61767 = VECTOR('',#61768,1.); +#61768 = DIRECTION('',(0.,-1.,0.)); +#61769 = ORIENTED_EDGE('',*,*,#61740,.F.); +#61770 = PLANE('',#61771); +#61771 = AXIS2_PLACEMENT_3D('',#61772,#61773,#61774); +#61772 = CARTESIAN_POINT('',(-9.,-5.72,0.)); +#61773 = DIRECTION('',(1.,0.,0.)); +#61774 = DIRECTION('',(0.,-1.,0.)); +#61775 = ADVANCED_FACE('',(#61776),#61796,.F.); +#61776 = FACE_BOUND('',#61777,.F.); +#61777 = EDGE_LOOP('',(#61778,#61779,#61788,#61794,#61795)); +#61778 = ORIENTED_EDGE('',*,*,#61615,.F.); +#61779 = ORIENTED_EDGE('',*,*,#61780,.F.); +#61780 = EDGE_CURVE('',#61781,#61605,#61783,.T.); +#61781 = VERTEX_POINT('',#61782); +#61782 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#61783 = CIRCLE('',#61784,0.275); +#61784 = AXIS2_PLACEMENT_3D('',#61785,#61786,#61787); +#61785 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#61786 = DIRECTION('',(0.,0.,1.)); +#61787 = DIRECTION('',(1.,0.,-0.)); +#61788 = ORIENTED_EDGE('',*,*,#61789,.F.); +#61789 = EDGE_CURVE('',#61757,#61781,#61790,.T.); +#61790 = LINE('',#61791,#61792); +#61791 = CARTESIAN_POINT('',(-9.,-6.445,0.8)); +#61792 = VECTOR('',#61793,1.); +#61793 = DIRECTION('',(0.,0.,1.)); +#61794 = ORIENTED_EDGE('',*,*,#61756,.F.); +#61795 = ORIENTED_EDGE('',*,*,#61534,.T.); +#61796 = CYLINDRICAL_SURFACE('',#61797,0.275); +#61797 = AXIS2_PLACEMENT_3D('',#61798,#61799,#61800); +#61798 = CARTESIAN_POINT('',(-9.,-6.17,0.8)); +#61799 = DIRECTION('',(0.,0.,1.)); +#61800 = DIRECTION('',(1.,0.,-0.)); +#61801 = ADVANCED_FACE('',(#61802),#61820,.T.); +#61802 = FACE_BOUND('',#61803,.T.); +#61803 = EDGE_LOOP('',(#61804,#61805,#61813,#61819)); +#61804 = ORIENTED_EDGE('',*,*,#61589,.T.); +#61805 = ORIENTED_EDGE('',*,*,#61806,.T.); +#61806 = EDGE_CURVE('',#61582,#61807,#61809,.T.); +#61807 = VERTEX_POINT('',#61808); +#61808 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#61809 = LINE('',#61810,#61811); +#61810 = CARTESIAN_POINT('',(-8.55,-5.72,0.8)); +#61811 = VECTOR('',#61812,1.); +#61812 = DIRECTION('',(0.,-1.,0.)); +#61813 = ORIENTED_EDGE('',*,*,#61814,.F.); +#61814 = EDGE_CURVE('',#61688,#61807,#61815,.T.); +#61815 = LINE('',#61816,#61817); +#61816 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#61817 = VECTOR('',#61818,1.); +#61818 = DIRECTION('',(0.,0.,1.)); +#61819 = ORIENTED_EDGE('',*,*,#61695,.F.); +#61820 = PLANE('',#61821); +#61821 = AXIS2_PLACEMENT_3D('',#61822,#61823,#61824); +#61822 = CARTESIAN_POINT('',(-8.55,-5.72,0.4)); +#61823 = DIRECTION('',(1.,0.,0.)); +#61824 = DIRECTION('',(0.,-1.,0.)); +#61825 = ADVANCED_FACE('',(#61826),#61847,.T.); +#61826 = FACE_BOUND('',#61827,.T.); +#61827 = EDGE_LOOP('',(#61828,#61829,#61830,#61831,#61832,#61840,#61846) + ); +#61828 = ORIENTED_EDGE('',*,*,#61581,.F.); +#61829 = ORIENTED_EDGE('',*,*,#61639,.T.); +#61830 = ORIENTED_EDGE('',*,*,#61604,.F.); +#61831 = ORIENTED_EDGE('',*,*,#61780,.F.); +#61832 = ORIENTED_EDGE('',*,*,#61833,.T.); +#61833 = EDGE_CURVE('',#61781,#61834,#61836,.T.); +#61834 = VERTEX_POINT('',#61835); +#61835 = CARTESIAN_POINT('',(-9.,-6.62,0.8)); +#61836 = LINE('',#61837,#61838); +#61837 = CARTESIAN_POINT('',(-9.,-5.72,0.8)); +#61838 = VECTOR('',#61839,1.); +#61839 = DIRECTION('',(0.,-1.,0.)); +#61840 = ORIENTED_EDGE('',*,*,#61841,.F.); +#61841 = EDGE_CURVE('',#61807,#61834,#61842,.T.); +#61842 = LINE('',#61843,#61844); +#61843 = CARTESIAN_POINT('',(-8.55,-6.62,0.8)); +#61844 = VECTOR('',#61845,1.); +#61845 = DIRECTION('',(-1.,0.,0.)); +#61846 = ORIENTED_EDGE('',*,*,#61806,.F.); +#61847 = PLANE('',#61848); +#61848 = AXIS2_PLACEMENT_3D('',#61849,#61850,#61851); +#61849 = CARTESIAN_POINT('',(-8.775,-6.17,0.8)); +#61850 = DIRECTION('',(0.,0.,1.)); +#61851 = DIRECTION('',(1.,0.,-0.)); +#61852 = ADVANCED_FACE('',(#61853),#61859,.T.); +#61853 = FACE_BOUND('',#61854,.T.); +#61854 = EDGE_LOOP('',(#61855,#61856,#61857,#61858)); +#61855 = ORIENTED_EDGE('',*,*,#61663,.T.); +#61856 = ORIENTED_EDGE('',*,*,#61711,.T.); +#61857 = ORIENTED_EDGE('',*,*,#61687,.F.); +#61858 = ORIENTED_EDGE('',*,*,#61726,.F.); +#61859 = PLANE('',#61860); +#61860 = AXIS2_PLACEMENT_3D('',#61861,#61862,#61863); +#61861 = CARTESIAN_POINT('',(-8.55,-6.62,0.)); +#61862 = DIRECTION('',(0.,-1.,0.)); +#61863 = DIRECTION('',(0.,0.,1.)); +#61864 = ADVANCED_FACE('',(#61865),#61876,.T.); +#61865 = FACE_BOUND('',#61866,.T.); +#61866 = EDGE_LOOP('',(#61867,#61868,#61869,#61875)); +#61867 = ORIENTED_EDGE('',*,*,#61814,.T.); +#61868 = ORIENTED_EDGE('',*,*,#61841,.T.); +#61869 = ORIENTED_EDGE('',*,*,#61870,.F.); +#61870 = EDGE_CURVE('',#61733,#61834,#61871,.T.); +#61871 = LINE('',#61872,#61873); +#61872 = CARTESIAN_POINT('',(-9.,-6.62,0.4)); +#61873 = VECTOR('',#61874,1.); +#61874 = DIRECTION('',(0.,0.,1.)); +#61875 = ORIENTED_EDGE('',*,*,#61732,.F.); +#61876 = PLANE('',#61877); +#61877 = AXIS2_PLACEMENT_3D('',#61878,#61879,#61880); +#61878 = CARTESIAN_POINT('',(-8.55,-6.62,0.4)); +#61879 = DIRECTION('',(0.,-1.,0.)); +#61880 = DIRECTION('',(-1.,0.,0.)); +#61881 = ADVANCED_FACE('',(#61882),#61888,.F.); +#61882 = FACE_BOUND('',#61883,.F.); +#61883 = EDGE_LOOP('',(#61884,#61885,#61886,#61887)); +#61884 = ORIENTED_EDGE('',*,*,#61764,.F.); +#61885 = ORIENTED_EDGE('',*,*,#61789,.T.); +#61886 = ORIENTED_EDGE('',*,*,#61833,.T.); +#61887 = ORIENTED_EDGE('',*,*,#61870,.F.); +#61888 = PLANE('',#61889); +#61889 = AXIS2_PLACEMENT_3D('',#61890,#61891,#61892); +#61890 = CARTESIAN_POINT('',(-9.,-5.72,0.4)); +#61891 = DIRECTION('',(1.,0.,0.)); +#61892 = DIRECTION('',(0.,-1.,0.)); +#61893 = MANIFOLD_SOLID_BREP('',#61894); +#61894 = CLOSED_SHELL('',(#61895,#61935,#61966,#61997,#62047,#62078, + #62111,#62128,#62152,#62183,#62200,#62229,#62253,#62279,#62303, + #62330,#62342,#62359)); +#61895 = ADVANCED_FACE('',(#61896),#61930,.T.); +#61896 = FACE_BOUND('',#61897,.T.); +#61897 = EDGE_LOOP('',(#61898,#61908,#61916,#61924)); +#61898 = ORIENTED_EDGE('',*,*,#61899,.T.); +#61899 = EDGE_CURVE('',#61900,#61902,#61904,.T.); +#61900 = VERTEX_POINT('',#61901); +#61901 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61902 = VERTEX_POINT('',#61903); +#61903 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#61904 = LINE('',#61905,#61906); +#61905 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61906 = VECTOR('',#61907,1.); +#61907 = DIRECTION('',(0.,0.,1.)); +#61908 = ORIENTED_EDGE('',*,*,#61909,.T.); +#61909 = EDGE_CURVE('',#61902,#61910,#61912,.T.); +#61910 = VERTEX_POINT('',#61911); +#61911 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#61912 = LINE('',#61913,#61914); +#61913 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#61914 = VECTOR('',#61915,1.); +#61915 = DIRECTION('',(1.,0.,0.)); +#61916 = ORIENTED_EDGE('',*,*,#61917,.F.); +#61917 = EDGE_CURVE('',#61918,#61910,#61920,.T.); +#61918 = VERTEX_POINT('',#61919); +#61919 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#61920 = LINE('',#61921,#61922); +#61921 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#61922 = VECTOR('',#61923,1.); +#61923 = DIRECTION('',(0.,0.,1.)); +#61924 = ORIENTED_EDGE('',*,*,#61925,.F.); +#61925 = EDGE_CURVE('',#61900,#61918,#61926,.T.); +#61926 = LINE('',#61927,#61928); +#61927 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61928 = VECTOR('',#61929,1.); +#61929 = DIRECTION('',(1.,0.,0.)); +#61930 = PLANE('',#61931); +#61931 = AXIS2_PLACEMENT_3D('',#61932,#61933,#61934); +#61932 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61933 = DIRECTION('',(0.,1.,0.)); +#61934 = DIRECTION('',(1.,0.,0.)); +#61935 = ADVANCED_FACE('',(#61936),#61961,.F.); +#61936 = FACE_BOUND('',#61937,.F.); +#61937 = EDGE_LOOP('',(#61938,#61946,#61947,#61955)); +#61938 = ORIENTED_EDGE('',*,*,#61939,.F.); +#61939 = EDGE_CURVE('',#61900,#61940,#61942,.T.); +#61940 = VERTEX_POINT('',#61941); +#61941 = CARTESIAN_POINT('',(-9.,-7.165,0.)); +#61942 = LINE('',#61943,#61944); +#61943 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61944 = VECTOR('',#61945,1.); +#61945 = DIRECTION('',(0.,-1.,0.)); +#61946 = ORIENTED_EDGE('',*,*,#61899,.T.); +#61947 = ORIENTED_EDGE('',*,*,#61948,.T.); +#61948 = EDGE_CURVE('',#61902,#61949,#61951,.T.); +#61949 = VERTEX_POINT('',#61950); +#61950 = CARTESIAN_POINT('',(-9.,-7.165,0.4)); +#61951 = LINE('',#61952,#61953); +#61952 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#61953 = VECTOR('',#61954,1.); +#61954 = DIRECTION('',(0.,-1.,0.)); +#61955 = ORIENTED_EDGE('',*,*,#61956,.F.); +#61956 = EDGE_CURVE('',#61940,#61949,#61957,.T.); +#61957 = LINE('',#61958,#61959); +#61958 = CARTESIAN_POINT('',(-9.,-7.165,0.8)); +#61959 = VECTOR('',#61960,1.); +#61960 = DIRECTION('',(0.,0.,1.)); +#61961 = PLANE('',#61962); +#61962 = AXIS2_PLACEMENT_3D('',#61963,#61964,#61965); +#61963 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#61964 = DIRECTION('',(1.,0.,0.)); +#61965 = DIRECTION('',(0.,-1.,0.)); +#61966 = ADVANCED_FACE('',(#61967),#61992,.F.); +#61967 = FACE_BOUND('',#61968,.F.); +#61968 = EDGE_LOOP('',(#61969,#61977,#61985,#61991)); +#61969 = ORIENTED_EDGE('',*,*,#61970,.T.); +#61970 = EDGE_CURVE('',#61918,#61971,#61973,.T.); +#61971 = VERTEX_POINT('',#61972); +#61972 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#61973 = LINE('',#61974,#61975); +#61974 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#61975 = VECTOR('',#61976,1.); +#61976 = DIRECTION('',(1.,0.,0.)); +#61977 = ORIENTED_EDGE('',*,*,#61978,.T.); +#61978 = EDGE_CURVE('',#61971,#61979,#61981,.T.); +#61979 = VERTEX_POINT('',#61980); +#61980 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#61981 = LINE('',#61982,#61983); +#61982 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#61983 = VECTOR('',#61984,1.); +#61984 = DIRECTION('',(0.,0.,1.)); +#61985 = ORIENTED_EDGE('',*,*,#61986,.F.); +#61986 = EDGE_CURVE('',#61910,#61979,#61987,.T.); +#61987 = LINE('',#61988,#61989); +#61988 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#61989 = VECTOR('',#61990,1.); +#61990 = DIRECTION('',(1.,0.,0.)); +#61991 = ORIENTED_EDGE('',*,*,#61917,.F.); +#61992 = PLANE('',#61993); +#61993 = AXIS2_PLACEMENT_3D('',#61994,#61995,#61996); +#61994 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#61995 = DIRECTION('',(0.,-1.,0.)); +#61996 = DIRECTION('',(0.,0.,1.)); +#61997 = ADVANCED_FACE('',(#61998),#62042,.F.); +#61998 = FACE_BOUND('',#61999,.F.); +#61999 = EDGE_LOOP('',(#62000,#62001,#62002,#62011,#62020,#62028,#62036) + ); +#62000 = ORIENTED_EDGE('',*,*,#61925,.F.); +#62001 = ORIENTED_EDGE('',*,*,#61939,.T.); +#62002 = ORIENTED_EDGE('',*,*,#62003,.F.); +#62003 = EDGE_CURVE('',#62004,#61940,#62006,.T.); +#62004 = VERTEX_POINT('',#62005); +#62005 = CARTESIAN_POINT('',(-8.725,-7.44,0.)); +#62006 = CIRCLE('',#62007,0.275); +#62007 = AXIS2_PLACEMENT_3D('',#62008,#62009,#62010); +#62008 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#62009 = DIRECTION('',(0.,0.,1.)); +#62010 = DIRECTION('',(1.,0.,-0.)); +#62011 = ORIENTED_EDGE('',*,*,#62012,.F.); +#62012 = EDGE_CURVE('',#62013,#62004,#62015,.T.); +#62013 = VERTEX_POINT('',#62014); +#62014 = CARTESIAN_POINT('',(-9.,-7.715,0.)); +#62015 = CIRCLE('',#62016,0.275); +#62016 = AXIS2_PLACEMENT_3D('',#62017,#62018,#62019); +#62017 = CARTESIAN_POINT('',(-9.,-7.44,0.)); +#62018 = DIRECTION('',(0.,0.,1.)); +#62019 = DIRECTION('',(1.,0.,-0.)); +#62020 = ORIENTED_EDGE('',*,*,#62021,.T.); +#62021 = EDGE_CURVE('',#62013,#62022,#62024,.T.); +#62022 = VERTEX_POINT('',#62023); +#62023 = CARTESIAN_POINT('',(-9.,-7.89,0.)); +#62024 = LINE('',#62025,#62026); +#62025 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#62026 = VECTOR('',#62027,1.); +#62027 = DIRECTION('',(0.,-1.,0.)); +#62028 = ORIENTED_EDGE('',*,*,#62029,.F.); +#62029 = EDGE_CURVE('',#62030,#62022,#62032,.T.); +#62030 = VERTEX_POINT('',#62031); +#62031 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62032 = LINE('',#62033,#62034); +#62033 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62034 = VECTOR('',#62035,1.); +#62035 = DIRECTION('',(-1.,0.,0.)); +#62036 = ORIENTED_EDGE('',*,*,#62037,.F.); +#62037 = EDGE_CURVE('',#61918,#62030,#62038,.T.); +#62038 = LINE('',#62039,#62040); +#62039 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#62040 = VECTOR('',#62041,1.); +#62041 = DIRECTION('',(0.,-1.,0.)); +#62042 = PLANE('',#62043); +#62043 = AXIS2_PLACEMENT_3D('',#62044,#62045,#62046); +#62044 = CARTESIAN_POINT('',(-8.775,-7.44,0.)); +#62045 = DIRECTION('',(0.,0.,1.)); +#62046 = DIRECTION('',(1.,0.,-0.)); +#62047 = ADVANCED_FACE('',(#62048),#62073,.T.); +#62048 = FACE_BOUND('',#62049,.T.); +#62049 = EDGE_LOOP('',(#62050,#62058,#62066,#62072)); +#62050 = ORIENTED_EDGE('',*,*,#62051,.T.); +#62051 = EDGE_CURVE('',#61902,#62052,#62054,.T.); +#62052 = VERTEX_POINT('',#62053); +#62053 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#62054 = LINE('',#62055,#62056); +#62055 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#62056 = VECTOR('',#62057,1.); +#62057 = DIRECTION('',(0.,0.,1.)); +#62058 = ORIENTED_EDGE('',*,*,#62059,.T.); +#62059 = EDGE_CURVE('',#62052,#62060,#62062,.T.); +#62060 = VERTEX_POINT('',#62061); +#62061 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#62062 = LINE('',#62063,#62064); +#62063 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#62064 = VECTOR('',#62065,1.); +#62065 = DIRECTION('',(1.,0.,0.)); +#62066 = ORIENTED_EDGE('',*,*,#62067,.F.); +#62067 = EDGE_CURVE('',#61910,#62060,#62068,.T.); +#62068 = LINE('',#62069,#62070); +#62069 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#62070 = VECTOR('',#62071,1.); +#62071 = DIRECTION('',(0.,0.,1.)); +#62072 = ORIENTED_EDGE('',*,*,#61909,.F.); +#62073 = PLANE('',#62074); +#62074 = AXIS2_PLACEMENT_3D('',#62075,#62076,#62077); +#62075 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#62076 = DIRECTION('',(0.,1.,0.)); +#62077 = DIRECTION('',(1.,0.,0.)); +#62078 = ADVANCED_FACE('',(#62079),#62106,.F.); +#62079 = FACE_BOUND('',#62080,.F.); +#62080 = EDGE_LOOP('',(#62081,#62092,#62098,#62099,#62100)); +#62081 = ORIENTED_EDGE('',*,*,#62082,.F.); +#62082 = EDGE_CURVE('',#62083,#62085,#62087,.T.); +#62083 = VERTEX_POINT('',#62084); +#62084 = CARTESIAN_POINT('',(-8.725,-7.44,0.8)); +#62085 = VERTEX_POINT('',#62086); +#62086 = CARTESIAN_POINT('',(-9.,-7.165,0.8)); +#62087 = CIRCLE('',#62088,0.275); +#62088 = AXIS2_PLACEMENT_3D('',#62089,#62090,#62091); +#62089 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#62090 = DIRECTION('',(0.,0.,1.)); +#62091 = DIRECTION('',(1.,0.,-0.)); +#62092 = ORIENTED_EDGE('',*,*,#62093,.T.); +#62093 = EDGE_CURVE('',#62083,#62004,#62094,.T.); +#62094 = LINE('',#62095,#62096); +#62095 = CARTESIAN_POINT('',(-8.725,-7.44,0.8)); +#62096 = VECTOR('',#62097,1.); +#62097 = DIRECTION('',(-0.,-0.,-1.)); +#62098 = ORIENTED_EDGE('',*,*,#62003,.T.); +#62099 = ORIENTED_EDGE('',*,*,#61956,.T.); +#62100 = ORIENTED_EDGE('',*,*,#62101,.T.); +#62101 = EDGE_CURVE('',#61949,#62085,#62102,.T.); +#62102 = LINE('',#62103,#62104); +#62103 = CARTESIAN_POINT('',(-9.,-7.165,0.8)); +#62104 = VECTOR('',#62105,1.); +#62105 = DIRECTION('',(0.,0.,1.)); +#62106 = CYLINDRICAL_SURFACE('',#62107,0.275); +#62107 = AXIS2_PLACEMENT_3D('',#62108,#62109,#62110); +#62108 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#62109 = DIRECTION('',(0.,0.,1.)); +#62110 = DIRECTION('',(1.,0.,-0.)); +#62111 = ADVANCED_FACE('',(#62112),#62123,.F.); +#62112 = FACE_BOUND('',#62113,.F.); +#62113 = EDGE_LOOP('',(#62114,#62115,#62116,#62122)); +#62114 = ORIENTED_EDGE('',*,*,#61948,.F.); +#62115 = ORIENTED_EDGE('',*,*,#62051,.T.); +#62116 = ORIENTED_EDGE('',*,*,#62117,.T.); +#62117 = EDGE_CURVE('',#62052,#62085,#62118,.T.); +#62118 = LINE('',#62119,#62120); +#62119 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#62120 = VECTOR('',#62121,1.); +#62121 = DIRECTION('',(0.,-1.,0.)); +#62122 = ORIENTED_EDGE('',*,*,#62101,.F.); +#62123 = PLANE('',#62124); +#62124 = AXIS2_PLACEMENT_3D('',#62125,#62126,#62127); +#62125 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#62126 = DIRECTION('',(1.,0.,0.)); +#62127 = DIRECTION('',(0.,-1.,0.)); +#62128 = ADVANCED_FACE('',(#62129),#62147,.T.); +#62129 = FACE_BOUND('',#62130,.T.); +#62130 = EDGE_LOOP('',(#62131,#62132,#62140,#62146)); +#62131 = ORIENTED_EDGE('',*,*,#61970,.T.); +#62132 = ORIENTED_EDGE('',*,*,#62133,.T.); +#62133 = EDGE_CURVE('',#61971,#62134,#62136,.T.); +#62134 = VERTEX_POINT('',#62135); +#62135 = CARTESIAN_POINT('',(-8.15,-7.89,0.)); +#62136 = LINE('',#62137,#62138); +#62137 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#62138 = VECTOR('',#62139,1.); +#62139 = DIRECTION('',(0.,-1.,0.)); +#62140 = ORIENTED_EDGE('',*,*,#62141,.F.); +#62141 = EDGE_CURVE('',#62030,#62134,#62142,.T.); +#62142 = LINE('',#62143,#62144); +#62143 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62144 = VECTOR('',#62145,1.); +#62145 = DIRECTION('',(1.,0.,0.)); +#62146 = ORIENTED_EDGE('',*,*,#62037,.F.); +#62147 = PLANE('',#62148); +#62148 = AXIS2_PLACEMENT_3D('',#62149,#62150,#62151); +#62149 = CARTESIAN_POINT('',(-8.55,-6.99,0.)); +#62150 = DIRECTION('',(0.,0.,-1.)); +#62151 = DIRECTION('',(0.,-1.,0.)); +#62152 = ADVANCED_FACE('',(#62153),#62178,.F.); +#62153 = FACE_BOUND('',#62154,.F.); +#62154 = EDGE_LOOP('',(#62155,#62156,#62164,#62172)); +#62155 = ORIENTED_EDGE('',*,*,#61986,.T.); +#62156 = ORIENTED_EDGE('',*,*,#62157,.T.); +#62157 = EDGE_CURVE('',#61979,#62158,#62160,.T.); +#62158 = VERTEX_POINT('',#62159); +#62159 = CARTESIAN_POINT('',(-8.15,-7.89,0.4)); +#62160 = LINE('',#62161,#62162); +#62161 = CARTESIAN_POINT('',(-8.15,-6.99,0.4)); +#62162 = VECTOR('',#62163,1.); +#62163 = DIRECTION('',(0.,-1.,0.)); +#62164 = ORIENTED_EDGE('',*,*,#62165,.F.); +#62165 = EDGE_CURVE('',#62166,#62158,#62168,.T.); +#62166 = VERTEX_POINT('',#62167); +#62167 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#62168 = LINE('',#62169,#62170); +#62169 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#62170 = VECTOR('',#62171,1.); +#62171 = DIRECTION('',(1.,0.,0.)); +#62172 = ORIENTED_EDGE('',*,*,#62173,.F.); +#62173 = EDGE_CURVE('',#61910,#62166,#62174,.T.); +#62174 = LINE('',#62175,#62176); +#62175 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#62176 = VECTOR('',#62177,1.); +#62177 = DIRECTION('',(0.,-1.,0.)); +#62178 = PLANE('',#62179); +#62179 = AXIS2_PLACEMENT_3D('',#62180,#62181,#62182); +#62180 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#62181 = DIRECTION('',(0.,0.,-1.)); +#62182 = DIRECTION('',(0.,-1.,0.)); +#62183 = ADVANCED_FACE('',(#62184),#62195,.T.); +#62184 = FACE_BOUND('',#62185,.T.); +#62185 = EDGE_LOOP('',(#62186,#62187,#62188,#62194)); +#62186 = ORIENTED_EDGE('',*,*,#61978,.T.); +#62187 = ORIENTED_EDGE('',*,*,#62157,.T.); +#62188 = ORIENTED_EDGE('',*,*,#62189,.F.); +#62189 = EDGE_CURVE('',#62134,#62158,#62190,.T.); +#62190 = LINE('',#62191,#62192); +#62191 = CARTESIAN_POINT('',(-8.15,-7.89,0.)); +#62192 = VECTOR('',#62193,1.); +#62193 = DIRECTION('',(0.,0.,1.)); +#62194 = ORIENTED_EDGE('',*,*,#62133,.F.); +#62195 = PLANE('',#62196); +#62196 = AXIS2_PLACEMENT_3D('',#62197,#62198,#62199); +#62197 = CARTESIAN_POINT('',(-8.15,-6.99,0.)); +#62198 = DIRECTION('',(1.,0.,0.)); +#62199 = DIRECTION('',(0.,-1.,0.)); +#62200 = ADVANCED_FACE('',(#62201),#62224,.T.); +#62201 = FACE_BOUND('',#62202,.T.); +#62202 = EDGE_LOOP('',(#62203,#62209,#62217,#62223)); +#62203 = ORIENTED_EDGE('',*,*,#62204,.T.); +#62204 = EDGE_CURVE('',#62030,#62166,#62205,.T.); +#62205 = LINE('',#62206,#62207); +#62206 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62207 = VECTOR('',#62208,1.); +#62208 = DIRECTION('',(0.,0.,1.)); +#62209 = ORIENTED_EDGE('',*,*,#62210,.T.); +#62210 = EDGE_CURVE('',#62166,#62211,#62213,.T.); +#62211 = VERTEX_POINT('',#62212); +#62212 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#62213 = LINE('',#62214,#62215); +#62214 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#62215 = VECTOR('',#62216,1.); +#62216 = DIRECTION('',(-1.,0.,0.)); +#62217 = ORIENTED_EDGE('',*,*,#62218,.F.); +#62218 = EDGE_CURVE('',#62022,#62211,#62219,.T.); +#62219 = LINE('',#62220,#62221); +#62220 = CARTESIAN_POINT('',(-9.,-7.89,0.)); +#62221 = VECTOR('',#62222,1.); +#62222 = DIRECTION('',(0.,0.,1.)); +#62223 = ORIENTED_EDGE('',*,*,#62029,.F.); +#62224 = PLANE('',#62225); +#62225 = AXIS2_PLACEMENT_3D('',#62226,#62227,#62228); +#62226 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62227 = DIRECTION('',(0.,-1.,0.)); +#62228 = DIRECTION('',(-1.,0.,0.)); +#62229 = ADVANCED_FACE('',(#62230),#62248,.F.); +#62230 = FACE_BOUND('',#62231,.F.); +#62231 = EDGE_LOOP('',(#62232,#62233,#62241,#62247)); +#62232 = ORIENTED_EDGE('',*,*,#62021,.F.); +#62233 = ORIENTED_EDGE('',*,*,#62234,.T.); +#62234 = EDGE_CURVE('',#62013,#62235,#62237,.T.); +#62235 = VERTEX_POINT('',#62236); +#62236 = CARTESIAN_POINT('',(-9.,-7.715,0.4)); +#62237 = LINE('',#62238,#62239); +#62238 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#62239 = VECTOR('',#62240,1.); +#62240 = DIRECTION('',(0.,0.,1.)); +#62241 = ORIENTED_EDGE('',*,*,#62242,.T.); +#62242 = EDGE_CURVE('',#62235,#62211,#62243,.T.); +#62243 = LINE('',#62244,#62245); +#62244 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#62245 = VECTOR('',#62246,1.); +#62246 = DIRECTION('',(0.,-1.,0.)); +#62247 = ORIENTED_EDGE('',*,*,#62218,.F.); +#62248 = PLANE('',#62249); +#62249 = AXIS2_PLACEMENT_3D('',#62250,#62251,#62252); +#62250 = CARTESIAN_POINT('',(-9.,-6.99,0.)); +#62251 = DIRECTION('',(1.,0.,0.)); +#62252 = DIRECTION('',(0.,-1.,0.)); +#62253 = ADVANCED_FACE('',(#62254),#62274,.F.); +#62254 = FACE_BOUND('',#62255,.F.); +#62255 = EDGE_LOOP('',(#62256,#62257,#62266,#62272,#62273)); +#62256 = ORIENTED_EDGE('',*,*,#62093,.F.); +#62257 = ORIENTED_EDGE('',*,*,#62258,.F.); +#62258 = EDGE_CURVE('',#62259,#62083,#62261,.T.); +#62259 = VERTEX_POINT('',#62260); +#62260 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#62261 = CIRCLE('',#62262,0.275); +#62262 = AXIS2_PLACEMENT_3D('',#62263,#62264,#62265); +#62263 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#62264 = DIRECTION('',(0.,0.,1.)); +#62265 = DIRECTION('',(1.,0.,-0.)); +#62266 = ORIENTED_EDGE('',*,*,#62267,.F.); +#62267 = EDGE_CURVE('',#62235,#62259,#62268,.T.); +#62268 = LINE('',#62269,#62270); +#62269 = CARTESIAN_POINT('',(-9.,-7.715,0.8)); +#62270 = VECTOR('',#62271,1.); +#62271 = DIRECTION('',(0.,0.,1.)); +#62272 = ORIENTED_EDGE('',*,*,#62234,.F.); +#62273 = ORIENTED_EDGE('',*,*,#62012,.T.); +#62274 = CYLINDRICAL_SURFACE('',#62275,0.275); +#62275 = AXIS2_PLACEMENT_3D('',#62276,#62277,#62278); +#62276 = CARTESIAN_POINT('',(-9.,-7.44,0.8)); +#62277 = DIRECTION('',(0.,0.,1.)); +#62278 = DIRECTION('',(1.,0.,-0.)); +#62279 = ADVANCED_FACE('',(#62280),#62298,.T.); +#62280 = FACE_BOUND('',#62281,.T.); +#62281 = EDGE_LOOP('',(#62282,#62283,#62291,#62297)); +#62282 = ORIENTED_EDGE('',*,*,#62067,.T.); +#62283 = ORIENTED_EDGE('',*,*,#62284,.T.); +#62284 = EDGE_CURVE('',#62060,#62285,#62287,.T.); +#62285 = VERTEX_POINT('',#62286); +#62286 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#62287 = LINE('',#62288,#62289); +#62288 = CARTESIAN_POINT('',(-8.55,-6.99,0.8)); +#62289 = VECTOR('',#62290,1.); +#62290 = DIRECTION('',(0.,-1.,0.)); +#62291 = ORIENTED_EDGE('',*,*,#62292,.F.); +#62292 = EDGE_CURVE('',#62166,#62285,#62293,.T.); +#62293 = LINE('',#62294,#62295); +#62294 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#62295 = VECTOR('',#62296,1.); +#62296 = DIRECTION('',(0.,0.,1.)); +#62297 = ORIENTED_EDGE('',*,*,#62173,.F.); +#62298 = PLANE('',#62299); +#62299 = AXIS2_PLACEMENT_3D('',#62300,#62301,#62302); +#62300 = CARTESIAN_POINT('',(-8.55,-6.99,0.4)); +#62301 = DIRECTION('',(1.,0.,0.)); +#62302 = DIRECTION('',(0.,-1.,0.)); +#62303 = ADVANCED_FACE('',(#62304),#62325,.T.); +#62304 = FACE_BOUND('',#62305,.T.); +#62305 = EDGE_LOOP('',(#62306,#62307,#62308,#62309,#62310,#62318,#62324) + ); +#62306 = ORIENTED_EDGE('',*,*,#62059,.F.); +#62307 = ORIENTED_EDGE('',*,*,#62117,.T.); +#62308 = ORIENTED_EDGE('',*,*,#62082,.F.); +#62309 = ORIENTED_EDGE('',*,*,#62258,.F.); +#62310 = ORIENTED_EDGE('',*,*,#62311,.T.); +#62311 = EDGE_CURVE('',#62259,#62312,#62314,.T.); +#62312 = VERTEX_POINT('',#62313); +#62313 = CARTESIAN_POINT('',(-9.,-7.89,0.8)); +#62314 = LINE('',#62315,#62316); +#62315 = CARTESIAN_POINT('',(-9.,-6.99,0.8)); +#62316 = VECTOR('',#62317,1.); +#62317 = DIRECTION('',(0.,-1.,0.)); +#62318 = ORIENTED_EDGE('',*,*,#62319,.F.); +#62319 = EDGE_CURVE('',#62285,#62312,#62320,.T.); +#62320 = LINE('',#62321,#62322); +#62321 = CARTESIAN_POINT('',(-8.55,-7.89,0.8)); +#62322 = VECTOR('',#62323,1.); +#62323 = DIRECTION('',(-1.,0.,0.)); +#62324 = ORIENTED_EDGE('',*,*,#62284,.F.); +#62325 = PLANE('',#62326); +#62326 = AXIS2_PLACEMENT_3D('',#62327,#62328,#62329); +#62327 = CARTESIAN_POINT('',(-8.775,-7.44,0.8)); +#62328 = DIRECTION('',(0.,0.,1.)); +#62329 = DIRECTION('',(1.,0.,-0.)); +#62330 = ADVANCED_FACE('',(#62331),#62337,.T.); +#62331 = FACE_BOUND('',#62332,.T.); +#62332 = EDGE_LOOP('',(#62333,#62334,#62335,#62336)); +#62333 = ORIENTED_EDGE('',*,*,#62141,.T.); +#62334 = ORIENTED_EDGE('',*,*,#62189,.T.); +#62335 = ORIENTED_EDGE('',*,*,#62165,.F.); +#62336 = ORIENTED_EDGE('',*,*,#62204,.F.); +#62337 = PLANE('',#62338); +#62338 = AXIS2_PLACEMENT_3D('',#62339,#62340,#62341); +#62339 = CARTESIAN_POINT('',(-8.55,-7.89,0.)); +#62340 = DIRECTION('',(0.,-1.,0.)); +#62341 = DIRECTION('',(0.,0.,1.)); +#62342 = ADVANCED_FACE('',(#62343),#62354,.T.); +#62343 = FACE_BOUND('',#62344,.T.); +#62344 = EDGE_LOOP('',(#62345,#62346,#62347,#62353)); +#62345 = ORIENTED_EDGE('',*,*,#62292,.T.); +#62346 = ORIENTED_EDGE('',*,*,#62319,.T.); +#62347 = ORIENTED_EDGE('',*,*,#62348,.F.); +#62348 = EDGE_CURVE('',#62211,#62312,#62349,.T.); +#62349 = LINE('',#62350,#62351); +#62350 = CARTESIAN_POINT('',(-9.,-7.89,0.4)); +#62351 = VECTOR('',#62352,1.); +#62352 = DIRECTION('',(0.,0.,1.)); +#62353 = ORIENTED_EDGE('',*,*,#62210,.F.); +#62354 = PLANE('',#62355); +#62355 = AXIS2_PLACEMENT_3D('',#62356,#62357,#62358); +#62356 = CARTESIAN_POINT('',(-8.55,-7.89,0.4)); +#62357 = DIRECTION('',(0.,-1.,0.)); +#62358 = DIRECTION('',(-1.,0.,0.)); +#62359 = ADVANCED_FACE('',(#62360),#62366,.F.); +#62360 = FACE_BOUND('',#62361,.F.); +#62361 = EDGE_LOOP('',(#62362,#62363,#62364,#62365)); +#62362 = ORIENTED_EDGE('',*,*,#62242,.F.); +#62363 = ORIENTED_EDGE('',*,*,#62267,.T.); +#62364 = ORIENTED_EDGE('',*,*,#62311,.T.); +#62365 = ORIENTED_EDGE('',*,*,#62348,.F.); +#62366 = PLANE('',#62367); +#62367 = AXIS2_PLACEMENT_3D('',#62368,#62369,#62370); +#62368 = CARTESIAN_POINT('',(-9.,-6.99,0.4)); +#62369 = DIRECTION('',(1.,0.,0.)); +#62370 = DIRECTION('',(0.,-1.,0.)); +#62371 = MANIFOLD_SOLID_BREP('',#62372); +#62372 = CLOSED_SHELL('',(#62373,#62413,#62444,#62475,#62525,#62556, + #62589,#62606,#62630,#62661,#62678,#62707,#62731,#62757,#62781, + #62808,#62820,#62837)); +#62373 = ADVANCED_FACE('',(#62374),#62408,.T.); +#62374 = FACE_BOUND('',#62375,.T.); +#62375 = EDGE_LOOP('',(#62376,#62386,#62394,#62402)); +#62376 = ORIENTED_EDGE('',*,*,#62377,.T.); +#62377 = EDGE_CURVE('',#62378,#62380,#62382,.T.); +#62378 = VERTEX_POINT('',#62379); +#62379 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62380 = VERTEX_POINT('',#62381); +#62381 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62382 = LINE('',#62383,#62384); +#62383 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62384 = VECTOR('',#62385,1.); +#62385 = DIRECTION('',(0.,0.,1.)); +#62386 = ORIENTED_EDGE('',*,*,#62387,.T.); +#62387 = EDGE_CURVE('',#62380,#62388,#62390,.T.); +#62388 = VERTEX_POINT('',#62389); +#62389 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62390 = LINE('',#62391,#62392); +#62391 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62392 = VECTOR('',#62393,1.); +#62393 = DIRECTION('',(1.,0.,0.)); +#62394 = ORIENTED_EDGE('',*,*,#62395,.F.); +#62395 = EDGE_CURVE('',#62396,#62388,#62398,.T.); +#62396 = VERTEX_POINT('',#62397); +#62397 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62398 = LINE('',#62399,#62400); +#62399 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62400 = VECTOR('',#62401,1.); +#62401 = DIRECTION('',(0.,0.,1.)); +#62402 = ORIENTED_EDGE('',*,*,#62403,.F.); +#62403 = EDGE_CURVE('',#62378,#62396,#62404,.T.); +#62404 = LINE('',#62405,#62406); +#62405 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62406 = VECTOR('',#62407,1.); +#62407 = DIRECTION('',(1.,0.,0.)); +#62408 = PLANE('',#62409); +#62409 = AXIS2_PLACEMENT_3D('',#62410,#62411,#62412); +#62410 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62411 = DIRECTION('',(0.,1.,0.)); +#62412 = DIRECTION('',(1.,0.,0.)); +#62413 = ADVANCED_FACE('',(#62414),#62439,.F.); +#62414 = FACE_BOUND('',#62415,.F.); +#62415 = EDGE_LOOP('',(#62416,#62424,#62425,#62433)); +#62416 = ORIENTED_EDGE('',*,*,#62417,.F.); +#62417 = EDGE_CURVE('',#62378,#62418,#62420,.T.); +#62418 = VERTEX_POINT('',#62419); +#62419 = CARTESIAN_POINT('',(-9.,-8.435,0.)); +#62420 = LINE('',#62421,#62422); +#62421 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62422 = VECTOR('',#62423,1.); +#62423 = DIRECTION('',(0.,-1.,0.)); +#62424 = ORIENTED_EDGE('',*,*,#62377,.T.); +#62425 = ORIENTED_EDGE('',*,*,#62426,.T.); +#62426 = EDGE_CURVE('',#62380,#62427,#62429,.T.); +#62427 = VERTEX_POINT('',#62428); +#62428 = CARTESIAN_POINT('',(-9.,-8.435,0.4)); +#62429 = LINE('',#62430,#62431); +#62430 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62431 = VECTOR('',#62432,1.); +#62432 = DIRECTION('',(0.,-1.,0.)); +#62433 = ORIENTED_EDGE('',*,*,#62434,.F.); +#62434 = EDGE_CURVE('',#62418,#62427,#62435,.T.); +#62435 = LINE('',#62436,#62437); +#62436 = CARTESIAN_POINT('',(-9.,-8.435,0.8)); +#62437 = VECTOR('',#62438,1.); +#62438 = DIRECTION('',(0.,0.,1.)); +#62439 = PLANE('',#62440); +#62440 = AXIS2_PLACEMENT_3D('',#62441,#62442,#62443); +#62441 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62442 = DIRECTION('',(1.,0.,0.)); +#62443 = DIRECTION('',(0.,-1.,0.)); +#62444 = ADVANCED_FACE('',(#62445),#62470,.F.); +#62445 = FACE_BOUND('',#62446,.F.); +#62446 = EDGE_LOOP('',(#62447,#62455,#62463,#62469)); +#62447 = ORIENTED_EDGE('',*,*,#62448,.T.); +#62448 = EDGE_CURVE('',#62396,#62449,#62451,.T.); +#62449 = VERTEX_POINT('',#62450); +#62450 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#62451 = LINE('',#62452,#62453); +#62452 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62453 = VECTOR('',#62454,1.); +#62454 = DIRECTION('',(1.,0.,0.)); +#62455 = ORIENTED_EDGE('',*,*,#62456,.T.); +#62456 = EDGE_CURVE('',#62449,#62457,#62459,.T.); +#62457 = VERTEX_POINT('',#62458); +#62458 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#62459 = LINE('',#62460,#62461); +#62460 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#62461 = VECTOR('',#62462,1.); +#62462 = DIRECTION('',(0.,0.,1.)); +#62463 = ORIENTED_EDGE('',*,*,#62464,.F.); +#62464 = EDGE_CURVE('',#62388,#62457,#62465,.T.); +#62465 = LINE('',#62466,#62467); +#62466 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62467 = VECTOR('',#62468,1.); +#62468 = DIRECTION('',(1.,0.,0.)); +#62469 = ORIENTED_EDGE('',*,*,#62395,.F.); +#62470 = PLANE('',#62471); +#62471 = AXIS2_PLACEMENT_3D('',#62472,#62473,#62474); +#62472 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62473 = DIRECTION('',(0.,-1.,0.)); +#62474 = DIRECTION('',(0.,0.,1.)); +#62475 = ADVANCED_FACE('',(#62476),#62520,.F.); +#62476 = FACE_BOUND('',#62477,.F.); +#62477 = EDGE_LOOP('',(#62478,#62479,#62480,#62489,#62498,#62506,#62514) + ); +#62478 = ORIENTED_EDGE('',*,*,#62403,.F.); +#62479 = ORIENTED_EDGE('',*,*,#62417,.T.); +#62480 = ORIENTED_EDGE('',*,*,#62481,.F.); +#62481 = EDGE_CURVE('',#62482,#62418,#62484,.T.); +#62482 = VERTEX_POINT('',#62483); +#62483 = CARTESIAN_POINT('',(-8.725,-8.71,0.)); +#62484 = CIRCLE('',#62485,0.275); +#62485 = AXIS2_PLACEMENT_3D('',#62486,#62487,#62488); +#62486 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#62487 = DIRECTION('',(0.,0.,1.)); +#62488 = DIRECTION('',(1.,0.,-0.)); +#62489 = ORIENTED_EDGE('',*,*,#62490,.F.); +#62490 = EDGE_CURVE('',#62491,#62482,#62493,.T.); +#62491 = VERTEX_POINT('',#62492); +#62492 = CARTESIAN_POINT('',(-9.,-8.985,0.)); +#62493 = CIRCLE('',#62494,0.275); +#62494 = AXIS2_PLACEMENT_3D('',#62495,#62496,#62497); +#62495 = CARTESIAN_POINT('',(-9.,-8.71,0.)); +#62496 = DIRECTION('',(0.,0.,1.)); +#62497 = DIRECTION('',(1.,0.,-0.)); +#62498 = ORIENTED_EDGE('',*,*,#62499,.T.); +#62499 = EDGE_CURVE('',#62491,#62500,#62502,.T.); +#62500 = VERTEX_POINT('',#62501); +#62501 = CARTESIAN_POINT('',(-9.,-9.16,0.)); +#62502 = LINE('',#62503,#62504); +#62503 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62504 = VECTOR('',#62505,1.); +#62505 = DIRECTION('',(0.,-1.,0.)); +#62506 = ORIENTED_EDGE('',*,*,#62507,.F.); +#62507 = EDGE_CURVE('',#62508,#62500,#62510,.T.); +#62508 = VERTEX_POINT('',#62509); +#62509 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62510 = LINE('',#62511,#62512); +#62511 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62512 = VECTOR('',#62513,1.); +#62513 = DIRECTION('',(-1.,0.,0.)); +#62514 = ORIENTED_EDGE('',*,*,#62515,.F.); +#62515 = EDGE_CURVE('',#62396,#62508,#62516,.T.); +#62516 = LINE('',#62517,#62518); +#62517 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62518 = VECTOR('',#62519,1.); +#62519 = DIRECTION('',(0.,-1.,0.)); +#62520 = PLANE('',#62521); +#62521 = AXIS2_PLACEMENT_3D('',#62522,#62523,#62524); +#62522 = CARTESIAN_POINT('',(-8.775,-8.71,0.)); +#62523 = DIRECTION('',(0.,0.,1.)); +#62524 = DIRECTION('',(1.,0.,-0.)); +#62525 = ADVANCED_FACE('',(#62526),#62551,.T.); +#62526 = FACE_BOUND('',#62527,.T.); +#62527 = EDGE_LOOP('',(#62528,#62536,#62544,#62550)); +#62528 = ORIENTED_EDGE('',*,*,#62529,.T.); +#62529 = EDGE_CURVE('',#62380,#62530,#62532,.T.); +#62530 = VERTEX_POINT('',#62531); +#62531 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#62532 = LINE('',#62533,#62534); +#62533 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62534 = VECTOR('',#62535,1.); +#62535 = DIRECTION('',(0.,0.,1.)); +#62536 = ORIENTED_EDGE('',*,*,#62537,.T.); +#62537 = EDGE_CURVE('',#62530,#62538,#62540,.T.); +#62538 = VERTEX_POINT('',#62539); +#62539 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#62540 = LINE('',#62541,#62542); +#62541 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#62542 = VECTOR('',#62543,1.); +#62543 = DIRECTION('',(1.,0.,0.)); +#62544 = ORIENTED_EDGE('',*,*,#62545,.F.); +#62545 = EDGE_CURVE('',#62388,#62538,#62546,.T.); +#62546 = LINE('',#62547,#62548); +#62547 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62548 = VECTOR('',#62549,1.); +#62549 = DIRECTION('',(0.,0.,1.)); +#62550 = ORIENTED_EDGE('',*,*,#62387,.F.); +#62551 = PLANE('',#62552); +#62552 = AXIS2_PLACEMENT_3D('',#62553,#62554,#62555); +#62553 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62554 = DIRECTION('',(0.,1.,0.)); +#62555 = DIRECTION('',(1.,0.,0.)); +#62556 = ADVANCED_FACE('',(#62557),#62584,.F.); +#62557 = FACE_BOUND('',#62558,.F.); +#62558 = EDGE_LOOP('',(#62559,#62570,#62576,#62577,#62578)); +#62559 = ORIENTED_EDGE('',*,*,#62560,.F.); +#62560 = EDGE_CURVE('',#62561,#62563,#62565,.T.); +#62561 = VERTEX_POINT('',#62562); +#62562 = CARTESIAN_POINT('',(-8.725,-8.71,0.8)); +#62563 = VERTEX_POINT('',#62564); +#62564 = CARTESIAN_POINT('',(-9.,-8.435,0.8)); +#62565 = CIRCLE('',#62566,0.275); +#62566 = AXIS2_PLACEMENT_3D('',#62567,#62568,#62569); +#62567 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#62568 = DIRECTION('',(0.,0.,1.)); +#62569 = DIRECTION('',(1.,0.,-0.)); +#62570 = ORIENTED_EDGE('',*,*,#62571,.T.); +#62571 = EDGE_CURVE('',#62561,#62482,#62572,.T.); +#62572 = LINE('',#62573,#62574); +#62573 = CARTESIAN_POINT('',(-8.725,-8.71,0.8)); +#62574 = VECTOR('',#62575,1.); +#62575 = DIRECTION('',(-0.,-0.,-1.)); +#62576 = ORIENTED_EDGE('',*,*,#62481,.T.); +#62577 = ORIENTED_EDGE('',*,*,#62434,.T.); +#62578 = ORIENTED_EDGE('',*,*,#62579,.T.); +#62579 = EDGE_CURVE('',#62427,#62563,#62580,.T.); +#62580 = LINE('',#62581,#62582); +#62581 = CARTESIAN_POINT('',(-9.,-8.435,0.8)); +#62582 = VECTOR('',#62583,1.); +#62583 = DIRECTION('',(0.,0.,1.)); +#62584 = CYLINDRICAL_SURFACE('',#62585,0.275); +#62585 = AXIS2_PLACEMENT_3D('',#62586,#62587,#62588); +#62586 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#62587 = DIRECTION('',(0.,0.,1.)); +#62588 = DIRECTION('',(1.,0.,-0.)); +#62589 = ADVANCED_FACE('',(#62590),#62601,.F.); +#62590 = FACE_BOUND('',#62591,.F.); +#62591 = EDGE_LOOP('',(#62592,#62593,#62594,#62600)); +#62592 = ORIENTED_EDGE('',*,*,#62426,.F.); +#62593 = ORIENTED_EDGE('',*,*,#62529,.T.); +#62594 = ORIENTED_EDGE('',*,*,#62595,.T.); +#62595 = EDGE_CURVE('',#62530,#62563,#62596,.T.); +#62596 = LINE('',#62597,#62598); +#62597 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#62598 = VECTOR('',#62599,1.); +#62599 = DIRECTION('',(0.,-1.,0.)); +#62600 = ORIENTED_EDGE('',*,*,#62579,.F.); +#62601 = PLANE('',#62602); +#62602 = AXIS2_PLACEMENT_3D('',#62603,#62604,#62605); +#62603 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62604 = DIRECTION('',(1.,0.,0.)); +#62605 = DIRECTION('',(0.,-1.,0.)); +#62606 = ADVANCED_FACE('',(#62607),#62625,.T.); +#62607 = FACE_BOUND('',#62608,.T.); +#62608 = EDGE_LOOP('',(#62609,#62610,#62618,#62624)); +#62609 = ORIENTED_EDGE('',*,*,#62448,.T.); +#62610 = ORIENTED_EDGE('',*,*,#62611,.T.); +#62611 = EDGE_CURVE('',#62449,#62612,#62614,.T.); +#62612 = VERTEX_POINT('',#62613); +#62613 = CARTESIAN_POINT('',(-8.15,-9.16,0.)); +#62614 = LINE('',#62615,#62616); +#62615 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#62616 = VECTOR('',#62617,1.); +#62617 = DIRECTION('',(0.,-1.,0.)); +#62618 = ORIENTED_EDGE('',*,*,#62619,.F.); +#62619 = EDGE_CURVE('',#62508,#62612,#62620,.T.); +#62620 = LINE('',#62621,#62622); +#62621 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62622 = VECTOR('',#62623,1.); +#62623 = DIRECTION('',(1.,0.,0.)); +#62624 = ORIENTED_EDGE('',*,*,#62515,.F.); +#62625 = PLANE('',#62626); +#62626 = AXIS2_PLACEMENT_3D('',#62627,#62628,#62629); +#62627 = CARTESIAN_POINT('',(-8.55,-8.26,0.)); +#62628 = DIRECTION('',(0.,0.,-1.)); +#62629 = DIRECTION('',(0.,-1.,0.)); +#62630 = ADVANCED_FACE('',(#62631),#62656,.F.); +#62631 = FACE_BOUND('',#62632,.F.); +#62632 = EDGE_LOOP('',(#62633,#62634,#62642,#62650)); +#62633 = ORIENTED_EDGE('',*,*,#62464,.T.); +#62634 = ORIENTED_EDGE('',*,*,#62635,.T.); +#62635 = EDGE_CURVE('',#62457,#62636,#62638,.T.); +#62636 = VERTEX_POINT('',#62637); +#62637 = CARTESIAN_POINT('',(-8.15,-9.16,0.4)); +#62638 = LINE('',#62639,#62640); +#62639 = CARTESIAN_POINT('',(-8.15,-8.26,0.4)); +#62640 = VECTOR('',#62641,1.); +#62641 = DIRECTION('',(0.,-1.,0.)); +#62642 = ORIENTED_EDGE('',*,*,#62643,.F.); +#62643 = EDGE_CURVE('',#62644,#62636,#62646,.T.); +#62644 = VERTEX_POINT('',#62645); +#62645 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#62646 = LINE('',#62647,#62648); +#62647 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#62648 = VECTOR('',#62649,1.); +#62649 = DIRECTION('',(1.,0.,0.)); +#62650 = ORIENTED_EDGE('',*,*,#62651,.F.); +#62651 = EDGE_CURVE('',#62388,#62644,#62652,.T.); +#62652 = LINE('',#62653,#62654); +#62653 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62654 = VECTOR('',#62655,1.); +#62655 = DIRECTION('',(0.,-1.,0.)); +#62656 = PLANE('',#62657); +#62657 = AXIS2_PLACEMENT_3D('',#62658,#62659,#62660); +#62658 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62659 = DIRECTION('',(0.,0.,-1.)); +#62660 = DIRECTION('',(0.,-1.,0.)); +#62661 = ADVANCED_FACE('',(#62662),#62673,.T.); +#62662 = FACE_BOUND('',#62663,.T.); +#62663 = EDGE_LOOP('',(#62664,#62665,#62666,#62672)); +#62664 = ORIENTED_EDGE('',*,*,#62456,.T.); +#62665 = ORIENTED_EDGE('',*,*,#62635,.T.); +#62666 = ORIENTED_EDGE('',*,*,#62667,.F.); +#62667 = EDGE_CURVE('',#62612,#62636,#62668,.T.); +#62668 = LINE('',#62669,#62670); +#62669 = CARTESIAN_POINT('',(-8.15,-9.16,0.)); +#62670 = VECTOR('',#62671,1.); +#62671 = DIRECTION('',(0.,0.,1.)); +#62672 = ORIENTED_EDGE('',*,*,#62611,.F.); +#62673 = PLANE('',#62674); +#62674 = AXIS2_PLACEMENT_3D('',#62675,#62676,#62677); +#62675 = CARTESIAN_POINT('',(-8.15,-8.26,0.)); +#62676 = DIRECTION('',(1.,0.,0.)); +#62677 = DIRECTION('',(0.,-1.,0.)); +#62678 = ADVANCED_FACE('',(#62679),#62702,.T.); +#62679 = FACE_BOUND('',#62680,.T.); +#62680 = EDGE_LOOP('',(#62681,#62687,#62695,#62701)); +#62681 = ORIENTED_EDGE('',*,*,#62682,.T.); +#62682 = EDGE_CURVE('',#62508,#62644,#62683,.T.); +#62683 = LINE('',#62684,#62685); +#62684 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62685 = VECTOR('',#62686,1.); +#62686 = DIRECTION('',(0.,0.,1.)); +#62687 = ORIENTED_EDGE('',*,*,#62688,.T.); +#62688 = EDGE_CURVE('',#62644,#62689,#62691,.T.); +#62689 = VERTEX_POINT('',#62690); +#62690 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#62691 = LINE('',#62692,#62693); +#62692 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#62693 = VECTOR('',#62694,1.); +#62694 = DIRECTION('',(-1.,0.,0.)); +#62695 = ORIENTED_EDGE('',*,*,#62696,.F.); +#62696 = EDGE_CURVE('',#62500,#62689,#62697,.T.); +#62697 = LINE('',#62698,#62699); +#62698 = CARTESIAN_POINT('',(-9.,-9.16,0.)); +#62699 = VECTOR('',#62700,1.); +#62700 = DIRECTION('',(0.,0.,1.)); +#62701 = ORIENTED_EDGE('',*,*,#62507,.F.); +#62702 = PLANE('',#62703); +#62703 = AXIS2_PLACEMENT_3D('',#62704,#62705,#62706); +#62704 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62705 = DIRECTION('',(0.,-1.,0.)); +#62706 = DIRECTION('',(-1.,0.,0.)); +#62707 = ADVANCED_FACE('',(#62708),#62726,.F.); +#62708 = FACE_BOUND('',#62709,.F.); +#62709 = EDGE_LOOP('',(#62710,#62711,#62719,#62725)); +#62710 = ORIENTED_EDGE('',*,*,#62499,.F.); +#62711 = ORIENTED_EDGE('',*,*,#62712,.T.); +#62712 = EDGE_CURVE('',#62491,#62713,#62715,.T.); +#62713 = VERTEX_POINT('',#62714); +#62714 = CARTESIAN_POINT('',(-9.,-8.985,0.4)); +#62715 = LINE('',#62716,#62717); +#62716 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#62717 = VECTOR('',#62718,1.); +#62718 = DIRECTION('',(0.,0.,1.)); +#62719 = ORIENTED_EDGE('',*,*,#62720,.T.); +#62720 = EDGE_CURVE('',#62713,#62689,#62721,.T.); +#62721 = LINE('',#62722,#62723); +#62722 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62723 = VECTOR('',#62724,1.); +#62724 = DIRECTION('',(0.,-1.,0.)); +#62725 = ORIENTED_EDGE('',*,*,#62696,.F.); +#62726 = PLANE('',#62727); +#62727 = AXIS2_PLACEMENT_3D('',#62728,#62729,#62730); +#62728 = CARTESIAN_POINT('',(-9.,-8.26,0.)); +#62729 = DIRECTION('',(1.,0.,0.)); +#62730 = DIRECTION('',(0.,-1.,0.)); +#62731 = ADVANCED_FACE('',(#62732),#62752,.F.); +#62732 = FACE_BOUND('',#62733,.F.); +#62733 = EDGE_LOOP('',(#62734,#62735,#62744,#62750,#62751)); +#62734 = ORIENTED_EDGE('',*,*,#62571,.F.); +#62735 = ORIENTED_EDGE('',*,*,#62736,.F.); +#62736 = EDGE_CURVE('',#62737,#62561,#62739,.T.); +#62737 = VERTEX_POINT('',#62738); +#62738 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#62739 = CIRCLE('',#62740,0.275); +#62740 = AXIS2_PLACEMENT_3D('',#62741,#62742,#62743); +#62741 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#62742 = DIRECTION('',(0.,0.,1.)); +#62743 = DIRECTION('',(1.,0.,-0.)); +#62744 = ORIENTED_EDGE('',*,*,#62745,.F.); +#62745 = EDGE_CURVE('',#62713,#62737,#62746,.T.); +#62746 = LINE('',#62747,#62748); +#62747 = CARTESIAN_POINT('',(-9.,-8.985,0.8)); +#62748 = VECTOR('',#62749,1.); +#62749 = DIRECTION('',(0.,0.,1.)); +#62750 = ORIENTED_EDGE('',*,*,#62712,.F.); +#62751 = ORIENTED_EDGE('',*,*,#62490,.T.); +#62752 = CYLINDRICAL_SURFACE('',#62753,0.275); +#62753 = AXIS2_PLACEMENT_3D('',#62754,#62755,#62756); +#62754 = CARTESIAN_POINT('',(-9.,-8.71,0.8)); +#62755 = DIRECTION('',(0.,0.,1.)); +#62756 = DIRECTION('',(1.,0.,-0.)); +#62757 = ADVANCED_FACE('',(#62758),#62776,.T.); +#62758 = FACE_BOUND('',#62759,.T.); +#62759 = EDGE_LOOP('',(#62760,#62761,#62769,#62775)); +#62760 = ORIENTED_EDGE('',*,*,#62545,.T.); +#62761 = ORIENTED_EDGE('',*,*,#62762,.T.); +#62762 = EDGE_CURVE('',#62538,#62763,#62765,.T.); +#62763 = VERTEX_POINT('',#62764); +#62764 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#62765 = LINE('',#62766,#62767); +#62766 = CARTESIAN_POINT('',(-8.55,-8.26,0.8)); +#62767 = VECTOR('',#62768,1.); +#62768 = DIRECTION('',(0.,-1.,0.)); +#62769 = ORIENTED_EDGE('',*,*,#62770,.F.); +#62770 = EDGE_CURVE('',#62644,#62763,#62771,.T.); +#62771 = LINE('',#62772,#62773); +#62772 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#62773 = VECTOR('',#62774,1.); +#62774 = DIRECTION('',(0.,0.,1.)); +#62775 = ORIENTED_EDGE('',*,*,#62651,.F.); +#62776 = PLANE('',#62777); +#62777 = AXIS2_PLACEMENT_3D('',#62778,#62779,#62780); +#62778 = CARTESIAN_POINT('',(-8.55,-8.26,0.4)); +#62779 = DIRECTION('',(1.,0.,0.)); +#62780 = DIRECTION('',(0.,-1.,0.)); +#62781 = ADVANCED_FACE('',(#62782),#62803,.T.); +#62782 = FACE_BOUND('',#62783,.T.); +#62783 = EDGE_LOOP('',(#62784,#62785,#62786,#62787,#62788,#62796,#62802) + ); +#62784 = ORIENTED_EDGE('',*,*,#62537,.F.); +#62785 = ORIENTED_EDGE('',*,*,#62595,.T.); +#62786 = ORIENTED_EDGE('',*,*,#62560,.F.); +#62787 = ORIENTED_EDGE('',*,*,#62736,.F.); +#62788 = ORIENTED_EDGE('',*,*,#62789,.T.); +#62789 = EDGE_CURVE('',#62737,#62790,#62792,.T.); +#62790 = VERTEX_POINT('',#62791); +#62791 = CARTESIAN_POINT('',(-9.,-9.16,0.8)); +#62792 = LINE('',#62793,#62794); +#62793 = CARTESIAN_POINT('',(-9.,-8.26,0.8)); +#62794 = VECTOR('',#62795,1.); +#62795 = DIRECTION('',(0.,-1.,0.)); +#62796 = ORIENTED_EDGE('',*,*,#62797,.F.); +#62797 = EDGE_CURVE('',#62763,#62790,#62798,.T.); +#62798 = LINE('',#62799,#62800); +#62799 = CARTESIAN_POINT('',(-8.55,-9.16,0.8)); +#62800 = VECTOR('',#62801,1.); +#62801 = DIRECTION('',(-1.,0.,0.)); +#62802 = ORIENTED_EDGE('',*,*,#62762,.F.); +#62803 = PLANE('',#62804); +#62804 = AXIS2_PLACEMENT_3D('',#62805,#62806,#62807); +#62805 = CARTESIAN_POINT('',(-8.775,-8.71,0.8)); +#62806 = DIRECTION('',(0.,0.,1.)); +#62807 = DIRECTION('',(1.,0.,-0.)); +#62808 = ADVANCED_FACE('',(#62809),#62815,.T.); +#62809 = FACE_BOUND('',#62810,.T.); +#62810 = EDGE_LOOP('',(#62811,#62812,#62813,#62814)); +#62811 = ORIENTED_EDGE('',*,*,#62619,.T.); +#62812 = ORIENTED_EDGE('',*,*,#62667,.T.); +#62813 = ORIENTED_EDGE('',*,*,#62643,.F.); +#62814 = ORIENTED_EDGE('',*,*,#62682,.F.); +#62815 = PLANE('',#62816); +#62816 = AXIS2_PLACEMENT_3D('',#62817,#62818,#62819); +#62817 = CARTESIAN_POINT('',(-8.55,-9.16,0.)); +#62818 = DIRECTION('',(0.,-1.,0.)); +#62819 = DIRECTION('',(0.,0.,1.)); +#62820 = ADVANCED_FACE('',(#62821),#62832,.T.); +#62821 = FACE_BOUND('',#62822,.T.); +#62822 = EDGE_LOOP('',(#62823,#62824,#62825,#62831)); +#62823 = ORIENTED_EDGE('',*,*,#62770,.T.); +#62824 = ORIENTED_EDGE('',*,*,#62797,.T.); +#62825 = ORIENTED_EDGE('',*,*,#62826,.F.); +#62826 = EDGE_CURVE('',#62689,#62790,#62827,.T.); +#62827 = LINE('',#62828,#62829); +#62828 = CARTESIAN_POINT('',(-9.,-9.16,0.4)); +#62829 = VECTOR('',#62830,1.); +#62830 = DIRECTION('',(0.,0.,1.)); +#62831 = ORIENTED_EDGE('',*,*,#62688,.F.); +#62832 = PLANE('',#62833); +#62833 = AXIS2_PLACEMENT_3D('',#62834,#62835,#62836); +#62834 = CARTESIAN_POINT('',(-8.55,-9.16,0.4)); +#62835 = DIRECTION('',(0.,-1.,0.)); +#62836 = DIRECTION('',(-1.,0.,0.)); +#62837 = ADVANCED_FACE('',(#62838),#62844,.F.); +#62838 = FACE_BOUND('',#62839,.F.); +#62839 = EDGE_LOOP('',(#62840,#62841,#62842,#62843)); +#62840 = ORIENTED_EDGE('',*,*,#62720,.F.); +#62841 = ORIENTED_EDGE('',*,*,#62745,.T.); +#62842 = ORIENTED_EDGE('',*,*,#62789,.T.); +#62843 = ORIENTED_EDGE('',*,*,#62826,.F.); +#62844 = PLANE('',#62845); +#62845 = AXIS2_PLACEMENT_3D('',#62846,#62847,#62848); +#62846 = CARTESIAN_POINT('',(-9.,-8.26,0.4)); +#62847 = DIRECTION('',(1.,0.,0.)); +#62848 = DIRECTION('',(0.,-1.,0.)); +#62849 = MANIFOLD_SOLID_BREP('',#62850); +#62850 = CLOSED_SHELL('',(#62851,#62891,#62922,#62953,#63003,#63034, + #63067,#63084,#63108,#63139,#63156,#63185,#63209,#63235,#63259, + #63286,#63298,#63315)); +#62851 = ADVANCED_FACE('',(#62852),#62886,.T.); +#62852 = FACE_BOUND('',#62853,.T.); +#62853 = EDGE_LOOP('',(#62854,#62864,#62872,#62880)); +#62854 = ORIENTED_EDGE('',*,*,#62855,.T.); +#62855 = EDGE_CURVE('',#62856,#62858,#62860,.T.); +#62856 = VERTEX_POINT('',#62857); +#62857 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62858 = VERTEX_POINT('',#62859); +#62859 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#62860 = LINE('',#62861,#62862); +#62861 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62862 = VECTOR('',#62863,1.); +#62863 = DIRECTION('',(0.,0.,1.)); +#62864 = ORIENTED_EDGE('',*,*,#62865,.T.); +#62865 = EDGE_CURVE('',#62858,#62866,#62868,.T.); +#62866 = VERTEX_POINT('',#62867); +#62867 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#62868 = LINE('',#62869,#62870); +#62869 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#62870 = VECTOR('',#62871,1.); +#62871 = DIRECTION('',(1.,0.,0.)); +#62872 = ORIENTED_EDGE('',*,*,#62873,.F.); +#62873 = EDGE_CURVE('',#62874,#62866,#62876,.T.); +#62874 = VERTEX_POINT('',#62875); +#62875 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#62876 = LINE('',#62877,#62878); +#62877 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#62878 = VECTOR('',#62879,1.); +#62879 = DIRECTION('',(0.,0.,1.)); +#62880 = ORIENTED_EDGE('',*,*,#62881,.F.); +#62881 = EDGE_CURVE('',#62856,#62874,#62882,.T.); +#62882 = LINE('',#62883,#62884); +#62883 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62884 = VECTOR('',#62885,1.); +#62885 = DIRECTION('',(1.,0.,0.)); +#62886 = PLANE('',#62887); +#62887 = AXIS2_PLACEMENT_3D('',#62888,#62889,#62890); +#62888 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62889 = DIRECTION('',(0.,1.,0.)); +#62890 = DIRECTION('',(1.,0.,0.)); +#62891 = ADVANCED_FACE('',(#62892),#62917,.F.); +#62892 = FACE_BOUND('',#62893,.F.); +#62893 = EDGE_LOOP('',(#62894,#62902,#62903,#62911)); +#62894 = ORIENTED_EDGE('',*,*,#62895,.F.); +#62895 = EDGE_CURVE('',#62856,#62896,#62898,.T.); +#62896 = VERTEX_POINT('',#62897); +#62897 = CARTESIAN_POINT('',(-9.,-9.705,0.)); +#62898 = LINE('',#62899,#62900); +#62899 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62900 = VECTOR('',#62901,1.); +#62901 = DIRECTION('',(0.,-1.,0.)); +#62902 = ORIENTED_EDGE('',*,*,#62855,.T.); +#62903 = ORIENTED_EDGE('',*,*,#62904,.T.); +#62904 = EDGE_CURVE('',#62858,#62905,#62907,.T.); +#62905 = VERTEX_POINT('',#62906); +#62906 = CARTESIAN_POINT('',(-9.,-9.705,0.4)); +#62907 = LINE('',#62908,#62909); +#62908 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#62909 = VECTOR('',#62910,1.); +#62910 = DIRECTION('',(0.,-1.,0.)); +#62911 = ORIENTED_EDGE('',*,*,#62912,.F.); +#62912 = EDGE_CURVE('',#62896,#62905,#62913,.T.); +#62913 = LINE('',#62914,#62915); +#62914 = CARTESIAN_POINT('',(-9.,-9.705,0.8)); +#62915 = VECTOR('',#62916,1.); +#62916 = DIRECTION('',(0.,0.,1.)); +#62917 = PLANE('',#62918); +#62918 = AXIS2_PLACEMENT_3D('',#62919,#62920,#62921); +#62919 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62920 = DIRECTION('',(1.,0.,0.)); +#62921 = DIRECTION('',(0.,-1.,0.)); +#62922 = ADVANCED_FACE('',(#62923),#62948,.F.); +#62923 = FACE_BOUND('',#62924,.F.); +#62924 = EDGE_LOOP('',(#62925,#62933,#62941,#62947)); +#62925 = ORIENTED_EDGE('',*,*,#62926,.T.); +#62926 = EDGE_CURVE('',#62874,#62927,#62929,.T.); +#62927 = VERTEX_POINT('',#62928); +#62928 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#62929 = LINE('',#62930,#62931); +#62930 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#62931 = VECTOR('',#62932,1.); +#62932 = DIRECTION('',(1.,0.,0.)); +#62933 = ORIENTED_EDGE('',*,*,#62934,.T.); +#62934 = EDGE_CURVE('',#62927,#62935,#62937,.T.); +#62935 = VERTEX_POINT('',#62936); +#62936 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#62937 = LINE('',#62938,#62939); +#62938 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#62939 = VECTOR('',#62940,1.); +#62940 = DIRECTION('',(0.,0.,1.)); +#62941 = ORIENTED_EDGE('',*,*,#62942,.F.); +#62942 = EDGE_CURVE('',#62866,#62935,#62943,.T.); +#62943 = LINE('',#62944,#62945); +#62944 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#62945 = VECTOR('',#62946,1.); +#62946 = DIRECTION('',(1.,0.,0.)); +#62947 = ORIENTED_EDGE('',*,*,#62873,.F.); +#62948 = PLANE('',#62949); +#62949 = AXIS2_PLACEMENT_3D('',#62950,#62951,#62952); +#62950 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#62951 = DIRECTION('',(0.,-1.,0.)); +#62952 = DIRECTION('',(0.,0.,1.)); +#62953 = ADVANCED_FACE('',(#62954),#62998,.F.); +#62954 = FACE_BOUND('',#62955,.F.); +#62955 = EDGE_LOOP('',(#62956,#62957,#62958,#62967,#62976,#62984,#62992) + ); +#62956 = ORIENTED_EDGE('',*,*,#62881,.F.); +#62957 = ORIENTED_EDGE('',*,*,#62895,.T.); +#62958 = ORIENTED_EDGE('',*,*,#62959,.F.); +#62959 = EDGE_CURVE('',#62960,#62896,#62962,.T.); +#62960 = VERTEX_POINT('',#62961); +#62961 = CARTESIAN_POINT('',(-8.725,-9.98,0.)); +#62962 = CIRCLE('',#62963,0.275); +#62963 = AXIS2_PLACEMENT_3D('',#62964,#62965,#62966); +#62964 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#62965 = DIRECTION('',(0.,0.,1.)); +#62966 = DIRECTION('',(1.,0.,-0.)); +#62967 = ORIENTED_EDGE('',*,*,#62968,.F.); +#62968 = EDGE_CURVE('',#62969,#62960,#62971,.T.); +#62969 = VERTEX_POINT('',#62970); +#62970 = CARTESIAN_POINT('',(-9.,-10.255,0.)); +#62971 = CIRCLE('',#62972,0.275); +#62972 = AXIS2_PLACEMENT_3D('',#62973,#62974,#62975); +#62973 = CARTESIAN_POINT('',(-9.,-9.98,0.)); +#62974 = DIRECTION('',(0.,0.,1.)); +#62975 = DIRECTION('',(1.,0.,-0.)); +#62976 = ORIENTED_EDGE('',*,*,#62977,.T.); +#62977 = EDGE_CURVE('',#62969,#62978,#62980,.T.); +#62978 = VERTEX_POINT('',#62979); +#62979 = CARTESIAN_POINT('',(-9.,-10.43,0.)); +#62980 = LINE('',#62981,#62982); +#62981 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#62982 = VECTOR('',#62983,1.); +#62983 = DIRECTION('',(0.,-1.,0.)); +#62984 = ORIENTED_EDGE('',*,*,#62985,.F.); +#62985 = EDGE_CURVE('',#62986,#62978,#62988,.T.); +#62986 = VERTEX_POINT('',#62987); +#62987 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#62988 = LINE('',#62989,#62990); +#62989 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#62990 = VECTOR('',#62991,1.); +#62991 = DIRECTION('',(-1.,0.,0.)); +#62992 = ORIENTED_EDGE('',*,*,#62993,.F.); +#62993 = EDGE_CURVE('',#62874,#62986,#62994,.T.); +#62994 = LINE('',#62995,#62996); +#62995 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#62996 = VECTOR('',#62997,1.); +#62997 = DIRECTION('',(0.,-1.,0.)); +#62998 = PLANE('',#62999); +#62999 = AXIS2_PLACEMENT_3D('',#63000,#63001,#63002); +#63000 = CARTESIAN_POINT('',(-8.775,-9.98,0.)); +#63001 = DIRECTION('',(0.,0.,1.)); +#63002 = DIRECTION('',(1.,0.,-0.)); +#63003 = ADVANCED_FACE('',(#63004),#63029,.T.); +#63004 = FACE_BOUND('',#63005,.T.); +#63005 = EDGE_LOOP('',(#63006,#63014,#63022,#63028)); +#63006 = ORIENTED_EDGE('',*,*,#63007,.T.); +#63007 = EDGE_CURVE('',#62858,#63008,#63010,.T.); +#63008 = VERTEX_POINT('',#63009); +#63009 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#63010 = LINE('',#63011,#63012); +#63011 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#63012 = VECTOR('',#63013,1.); +#63013 = DIRECTION('',(0.,0.,1.)); +#63014 = ORIENTED_EDGE('',*,*,#63015,.T.); +#63015 = EDGE_CURVE('',#63008,#63016,#63018,.T.); +#63016 = VERTEX_POINT('',#63017); +#63017 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#63018 = LINE('',#63019,#63020); +#63019 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#63020 = VECTOR('',#63021,1.); +#63021 = DIRECTION('',(1.,0.,0.)); +#63022 = ORIENTED_EDGE('',*,*,#63023,.F.); +#63023 = EDGE_CURVE('',#62866,#63016,#63024,.T.); +#63024 = LINE('',#63025,#63026); +#63025 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#63026 = VECTOR('',#63027,1.); +#63027 = DIRECTION('',(0.,0.,1.)); +#63028 = ORIENTED_EDGE('',*,*,#62865,.F.); +#63029 = PLANE('',#63030); +#63030 = AXIS2_PLACEMENT_3D('',#63031,#63032,#63033); +#63031 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#63032 = DIRECTION('',(0.,1.,0.)); +#63033 = DIRECTION('',(1.,0.,0.)); +#63034 = ADVANCED_FACE('',(#63035),#63062,.F.); +#63035 = FACE_BOUND('',#63036,.F.); +#63036 = EDGE_LOOP('',(#63037,#63048,#63054,#63055,#63056)); +#63037 = ORIENTED_EDGE('',*,*,#63038,.F.); +#63038 = EDGE_CURVE('',#63039,#63041,#63043,.T.); +#63039 = VERTEX_POINT('',#63040); +#63040 = CARTESIAN_POINT('',(-8.725,-9.98,0.8)); +#63041 = VERTEX_POINT('',#63042); +#63042 = CARTESIAN_POINT('',(-9.,-9.705,0.8)); +#63043 = CIRCLE('',#63044,0.275); +#63044 = AXIS2_PLACEMENT_3D('',#63045,#63046,#63047); +#63045 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#63046 = DIRECTION('',(0.,0.,1.)); +#63047 = DIRECTION('',(1.,0.,-0.)); +#63048 = ORIENTED_EDGE('',*,*,#63049,.T.); +#63049 = EDGE_CURVE('',#63039,#62960,#63050,.T.); +#63050 = LINE('',#63051,#63052); +#63051 = CARTESIAN_POINT('',(-8.725,-9.98,0.8)); +#63052 = VECTOR('',#63053,1.); +#63053 = DIRECTION('',(-0.,-0.,-1.)); +#63054 = ORIENTED_EDGE('',*,*,#62959,.T.); +#63055 = ORIENTED_EDGE('',*,*,#62912,.T.); +#63056 = ORIENTED_EDGE('',*,*,#63057,.T.); +#63057 = EDGE_CURVE('',#62905,#63041,#63058,.T.); +#63058 = LINE('',#63059,#63060); +#63059 = CARTESIAN_POINT('',(-9.,-9.705,0.8)); +#63060 = VECTOR('',#63061,1.); +#63061 = DIRECTION('',(0.,0.,1.)); +#63062 = CYLINDRICAL_SURFACE('',#63063,0.275); +#63063 = AXIS2_PLACEMENT_3D('',#63064,#63065,#63066); +#63064 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#63065 = DIRECTION('',(0.,0.,1.)); +#63066 = DIRECTION('',(1.,0.,-0.)); +#63067 = ADVANCED_FACE('',(#63068),#63079,.F.); +#63068 = FACE_BOUND('',#63069,.F.); +#63069 = EDGE_LOOP('',(#63070,#63071,#63072,#63078)); +#63070 = ORIENTED_EDGE('',*,*,#62904,.F.); +#63071 = ORIENTED_EDGE('',*,*,#63007,.T.); +#63072 = ORIENTED_EDGE('',*,*,#63073,.T.); +#63073 = EDGE_CURVE('',#63008,#63041,#63074,.T.); +#63074 = LINE('',#63075,#63076); +#63075 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#63076 = VECTOR('',#63077,1.); +#63077 = DIRECTION('',(0.,-1.,0.)); +#63078 = ORIENTED_EDGE('',*,*,#63057,.F.); +#63079 = PLANE('',#63080); +#63080 = AXIS2_PLACEMENT_3D('',#63081,#63082,#63083); +#63081 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#63082 = DIRECTION('',(1.,0.,0.)); +#63083 = DIRECTION('',(0.,-1.,0.)); +#63084 = ADVANCED_FACE('',(#63085),#63103,.T.); +#63085 = FACE_BOUND('',#63086,.T.); +#63086 = EDGE_LOOP('',(#63087,#63088,#63096,#63102)); +#63087 = ORIENTED_EDGE('',*,*,#62926,.T.); +#63088 = ORIENTED_EDGE('',*,*,#63089,.T.); +#63089 = EDGE_CURVE('',#62927,#63090,#63092,.T.); +#63090 = VERTEX_POINT('',#63091); +#63091 = CARTESIAN_POINT('',(-8.15,-10.43,0.)); +#63092 = LINE('',#63093,#63094); +#63093 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#63094 = VECTOR('',#63095,1.); +#63095 = DIRECTION('',(0.,-1.,0.)); +#63096 = ORIENTED_EDGE('',*,*,#63097,.F.); +#63097 = EDGE_CURVE('',#62986,#63090,#63098,.T.); +#63098 = LINE('',#63099,#63100); +#63099 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#63100 = VECTOR('',#63101,1.); +#63101 = DIRECTION('',(1.,0.,0.)); +#63102 = ORIENTED_EDGE('',*,*,#62993,.F.); +#63103 = PLANE('',#63104); +#63104 = AXIS2_PLACEMENT_3D('',#63105,#63106,#63107); +#63105 = CARTESIAN_POINT('',(-8.55,-9.53,0.)); +#63106 = DIRECTION('',(0.,0.,-1.)); +#63107 = DIRECTION('',(0.,-1.,0.)); +#63108 = ADVANCED_FACE('',(#63109),#63134,.F.); +#63109 = FACE_BOUND('',#63110,.F.); +#63110 = EDGE_LOOP('',(#63111,#63112,#63120,#63128)); +#63111 = ORIENTED_EDGE('',*,*,#62942,.T.); +#63112 = ORIENTED_EDGE('',*,*,#63113,.T.); +#63113 = EDGE_CURVE('',#62935,#63114,#63116,.T.); +#63114 = VERTEX_POINT('',#63115); +#63115 = CARTESIAN_POINT('',(-8.15,-10.43,0.4)); +#63116 = LINE('',#63117,#63118); +#63117 = CARTESIAN_POINT('',(-8.15,-9.53,0.4)); +#63118 = VECTOR('',#63119,1.); +#63119 = DIRECTION('',(0.,-1.,0.)); +#63120 = ORIENTED_EDGE('',*,*,#63121,.F.); +#63121 = EDGE_CURVE('',#63122,#63114,#63124,.T.); +#63122 = VERTEX_POINT('',#63123); +#63123 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#63124 = LINE('',#63125,#63126); +#63125 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#63126 = VECTOR('',#63127,1.); +#63127 = DIRECTION('',(1.,0.,0.)); +#63128 = ORIENTED_EDGE('',*,*,#63129,.F.); +#63129 = EDGE_CURVE('',#62866,#63122,#63130,.T.); +#63130 = LINE('',#63131,#63132); +#63131 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#63132 = VECTOR('',#63133,1.); +#63133 = DIRECTION('',(0.,-1.,0.)); +#63134 = PLANE('',#63135); +#63135 = AXIS2_PLACEMENT_3D('',#63136,#63137,#63138); +#63136 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#63137 = DIRECTION('',(0.,0.,-1.)); +#63138 = DIRECTION('',(0.,-1.,0.)); +#63139 = ADVANCED_FACE('',(#63140),#63151,.T.); +#63140 = FACE_BOUND('',#63141,.T.); +#63141 = EDGE_LOOP('',(#63142,#63143,#63144,#63150)); +#63142 = ORIENTED_EDGE('',*,*,#62934,.T.); +#63143 = ORIENTED_EDGE('',*,*,#63113,.T.); +#63144 = ORIENTED_EDGE('',*,*,#63145,.F.); +#63145 = EDGE_CURVE('',#63090,#63114,#63146,.T.); +#63146 = LINE('',#63147,#63148); +#63147 = CARTESIAN_POINT('',(-8.15,-10.43,0.)); +#63148 = VECTOR('',#63149,1.); +#63149 = DIRECTION('',(0.,0.,1.)); +#63150 = ORIENTED_EDGE('',*,*,#63089,.F.); +#63151 = PLANE('',#63152); +#63152 = AXIS2_PLACEMENT_3D('',#63153,#63154,#63155); +#63153 = CARTESIAN_POINT('',(-8.15,-9.53,0.)); +#63154 = DIRECTION('',(1.,0.,0.)); +#63155 = DIRECTION('',(0.,-1.,0.)); +#63156 = ADVANCED_FACE('',(#63157),#63180,.T.); +#63157 = FACE_BOUND('',#63158,.T.); +#63158 = EDGE_LOOP('',(#63159,#63165,#63173,#63179)); +#63159 = ORIENTED_EDGE('',*,*,#63160,.T.); +#63160 = EDGE_CURVE('',#62986,#63122,#63161,.T.); +#63161 = LINE('',#63162,#63163); +#63162 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#63163 = VECTOR('',#63164,1.); +#63164 = DIRECTION('',(0.,0.,1.)); +#63165 = ORIENTED_EDGE('',*,*,#63166,.T.); +#63166 = EDGE_CURVE('',#63122,#63167,#63169,.T.); +#63167 = VERTEX_POINT('',#63168); +#63168 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#63169 = LINE('',#63170,#63171); +#63170 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#63171 = VECTOR('',#63172,1.); +#63172 = DIRECTION('',(-1.,0.,0.)); +#63173 = ORIENTED_EDGE('',*,*,#63174,.F.); +#63174 = EDGE_CURVE('',#62978,#63167,#63175,.T.); +#63175 = LINE('',#63176,#63177); +#63176 = CARTESIAN_POINT('',(-9.,-10.43,0.)); +#63177 = VECTOR('',#63178,1.); +#63178 = DIRECTION('',(0.,0.,1.)); +#63179 = ORIENTED_EDGE('',*,*,#62985,.F.); +#63180 = PLANE('',#63181); +#63181 = AXIS2_PLACEMENT_3D('',#63182,#63183,#63184); +#63182 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#63183 = DIRECTION('',(0.,-1.,0.)); +#63184 = DIRECTION('',(-1.,0.,0.)); +#63185 = ADVANCED_FACE('',(#63186),#63204,.F.); +#63186 = FACE_BOUND('',#63187,.F.); +#63187 = EDGE_LOOP('',(#63188,#63189,#63197,#63203)); +#63188 = ORIENTED_EDGE('',*,*,#62977,.F.); +#63189 = ORIENTED_EDGE('',*,*,#63190,.T.); +#63190 = EDGE_CURVE('',#62969,#63191,#63193,.T.); +#63191 = VERTEX_POINT('',#63192); +#63192 = CARTESIAN_POINT('',(-9.,-10.255,0.4)); +#63193 = LINE('',#63194,#63195); +#63194 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#63195 = VECTOR('',#63196,1.); +#63196 = DIRECTION('',(0.,0.,1.)); +#63197 = ORIENTED_EDGE('',*,*,#63198,.T.); +#63198 = EDGE_CURVE('',#63191,#63167,#63199,.T.); +#63199 = LINE('',#63200,#63201); +#63200 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#63201 = VECTOR('',#63202,1.); +#63202 = DIRECTION('',(0.,-1.,0.)); +#63203 = ORIENTED_EDGE('',*,*,#63174,.F.); +#63204 = PLANE('',#63205); +#63205 = AXIS2_PLACEMENT_3D('',#63206,#63207,#63208); +#63206 = CARTESIAN_POINT('',(-9.,-9.53,0.)); +#63207 = DIRECTION('',(1.,0.,0.)); +#63208 = DIRECTION('',(0.,-1.,0.)); +#63209 = ADVANCED_FACE('',(#63210),#63230,.F.); +#63210 = FACE_BOUND('',#63211,.F.); +#63211 = EDGE_LOOP('',(#63212,#63213,#63222,#63228,#63229)); +#63212 = ORIENTED_EDGE('',*,*,#63049,.F.); +#63213 = ORIENTED_EDGE('',*,*,#63214,.F.); +#63214 = EDGE_CURVE('',#63215,#63039,#63217,.T.); +#63215 = VERTEX_POINT('',#63216); +#63216 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#63217 = CIRCLE('',#63218,0.275); +#63218 = AXIS2_PLACEMENT_3D('',#63219,#63220,#63221); +#63219 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#63220 = DIRECTION('',(0.,0.,1.)); +#63221 = DIRECTION('',(1.,0.,-0.)); +#63222 = ORIENTED_EDGE('',*,*,#63223,.F.); +#63223 = EDGE_CURVE('',#63191,#63215,#63224,.T.); +#63224 = LINE('',#63225,#63226); +#63225 = CARTESIAN_POINT('',(-9.,-10.255,0.8)); +#63226 = VECTOR('',#63227,1.); +#63227 = DIRECTION('',(0.,0.,1.)); +#63228 = ORIENTED_EDGE('',*,*,#63190,.F.); +#63229 = ORIENTED_EDGE('',*,*,#62968,.T.); +#63230 = CYLINDRICAL_SURFACE('',#63231,0.275); +#63231 = AXIS2_PLACEMENT_3D('',#63232,#63233,#63234); +#63232 = CARTESIAN_POINT('',(-9.,-9.98,0.8)); +#63233 = DIRECTION('',(0.,0.,1.)); +#63234 = DIRECTION('',(1.,0.,-0.)); +#63235 = ADVANCED_FACE('',(#63236),#63254,.T.); +#63236 = FACE_BOUND('',#63237,.T.); +#63237 = EDGE_LOOP('',(#63238,#63239,#63247,#63253)); +#63238 = ORIENTED_EDGE('',*,*,#63023,.T.); +#63239 = ORIENTED_EDGE('',*,*,#63240,.T.); +#63240 = EDGE_CURVE('',#63016,#63241,#63243,.T.); +#63241 = VERTEX_POINT('',#63242); +#63242 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#63243 = LINE('',#63244,#63245); +#63244 = CARTESIAN_POINT('',(-8.55,-9.53,0.8)); +#63245 = VECTOR('',#63246,1.); +#63246 = DIRECTION('',(0.,-1.,0.)); +#63247 = ORIENTED_EDGE('',*,*,#63248,.F.); +#63248 = EDGE_CURVE('',#63122,#63241,#63249,.T.); +#63249 = LINE('',#63250,#63251); +#63250 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#63251 = VECTOR('',#63252,1.); +#63252 = DIRECTION('',(0.,0.,1.)); +#63253 = ORIENTED_EDGE('',*,*,#63129,.F.); +#63254 = PLANE('',#63255); +#63255 = AXIS2_PLACEMENT_3D('',#63256,#63257,#63258); +#63256 = CARTESIAN_POINT('',(-8.55,-9.53,0.4)); +#63257 = DIRECTION('',(1.,0.,0.)); +#63258 = DIRECTION('',(0.,-1.,0.)); +#63259 = ADVANCED_FACE('',(#63260),#63281,.T.); +#63260 = FACE_BOUND('',#63261,.T.); +#63261 = EDGE_LOOP('',(#63262,#63263,#63264,#63265,#63266,#63274,#63280) + ); +#63262 = ORIENTED_EDGE('',*,*,#63015,.F.); +#63263 = ORIENTED_EDGE('',*,*,#63073,.T.); +#63264 = ORIENTED_EDGE('',*,*,#63038,.F.); +#63265 = ORIENTED_EDGE('',*,*,#63214,.F.); +#63266 = ORIENTED_EDGE('',*,*,#63267,.T.); +#63267 = EDGE_CURVE('',#63215,#63268,#63270,.T.); +#63268 = VERTEX_POINT('',#63269); +#63269 = CARTESIAN_POINT('',(-9.,-10.43,0.8)); +#63270 = LINE('',#63271,#63272); +#63271 = CARTESIAN_POINT('',(-9.,-9.53,0.8)); +#63272 = VECTOR('',#63273,1.); +#63273 = DIRECTION('',(0.,-1.,0.)); +#63274 = ORIENTED_EDGE('',*,*,#63275,.F.); +#63275 = EDGE_CURVE('',#63241,#63268,#63276,.T.); +#63276 = LINE('',#63277,#63278); +#63277 = CARTESIAN_POINT('',(-8.55,-10.43,0.8)); +#63278 = VECTOR('',#63279,1.); +#63279 = DIRECTION('',(-1.,0.,0.)); +#63280 = ORIENTED_EDGE('',*,*,#63240,.F.); +#63281 = PLANE('',#63282); +#63282 = AXIS2_PLACEMENT_3D('',#63283,#63284,#63285); +#63283 = CARTESIAN_POINT('',(-8.775,-9.98,0.8)); +#63284 = DIRECTION('',(0.,0.,1.)); +#63285 = DIRECTION('',(1.,0.,-0.)); +#63286 = ADVANCED_FACE('',(#63287),#63293,.T.); +#63287 = FACE_BOUND('',#63288,.T.); +#63288 = EDGE_LOOP('',(#63289,#63290,#63291,#63292)); +#63289 = ORIENTED_EDGE('',*,*,#63097,.T.); +#63290 = ORIENTED_EDGE('',*,*,#63145,.T.); +#63291 = ORIENTED_EDGE('',*,*,#63121,.F.); +#63292 = ORIENTED_EDGE('',*,*,#63160,.F.); +#63293 = PLANE('',#63294); +#63294 = AXIS2_PLACEMENT_3D('',#63295,#63296,#63297); +#63295 = CARTESIAN_POINT('',(-8.55,-10.43,0.)); +#63296 = DIRECTION('',(0.,-1.,0.)); +#63297 = DIRECTION('',(0.,0.,1.)); +#63298 = ADVANCED_FACE('',(#63299),#63310,.T.); +#63299 = FACE_BOUND('',#63300,.T.); +#63300 = EDGE_LOOP('',(#63301,#63302,#63303,#63309)); +#63301 = ORIENTED_EDGE('',*,*,#63248,.T.); +#63302 = ORIENTED_EDGE('',*,*,#63275,.T.); +#63303 = ORIENTED_EDGE('',*,*,#63304,.F.); +#63304 = EDGE_CURVE('',#63167,#63268,#63305,.T.); +#63305 = LINE('',#63306,#63307); +#63306 = CARTESIAN_POINT('',(-9.,-10.43,0.4)); +#63307 = VECTOR('',#63308,1.); +#63308 = DIRECTION('',(0.,0.,1.)); +#63309 = ORIENTED_EDGE('',*,*,#63166,.F.); +#63310 = PLANE('',#63311); +#63311 = AXIS2_PLACEMENT_3D('',#63312,#63313,#63314); +#63312 = CARTESIAN_POINT('',(-8.55,-10.43,0.4)); +#63313 = DIRECTION('',(0.,-1.,0.)); +#63314 = DIRECTION('',(-1.,0.,0.)); +#63315 = ADVANCED_FACE('',(#63316),#63322,.F.); +#63316 = FACE_BOUND('',#63317,.F.); +#63317 = EDGE_LOOP('',(#63318,#63319,#63320,#63321)); +#63318 = ORIENTED_EDGE('',*,*,#63198,.F.); +#63319 = ORIENTED_EDGE('',*,*,#63223,.T.); +#63320 = ORIENTED_EDGE('',*,*,#63267,.T.); +#63321 = ORIENTED_EDGE('',*,*,#63304,.F.); +#63322 = PLANE('',#63323); +#63323 = AXIS2_PLACEMENT_3D('',#63324,#63325,#63326); +#63324 = CARTESIAN_POINT('',(-9.,-9.53,0.4)); +#63325 = DIRECTION('',(1.,0.,0.)); +#63326 = DIRECTION('',(0.,-1.,0.)); +#63327 = MANIFOLD_SOLID_BREP('',#63328); +#63328 = CLOSED_SHELL('',(#63329,#63369,#63400,#63431,#63481,#63512, + #63545,#63562,#63586,#63617,#63634,#63663,#63687,#63713,#63737, + #63764,#63776,#63793)); +#63329 = ADVANCED_FACE('',(#63330),#63364,.T.); +#63330 = FACE_BOUND('',#63331,.T.); +#63331 = EDGE_LOOP('',(#63332,#63342,#63350,#63358)); +#63332 = ORIENTED_EDGE('',*,*,#63333,.T.); +#63333 = EDGE_CURVE('',#63334,#63336,#63338,.T.); +#63334 = VERTEX_POINT('',#63335); +#63335 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63336 = VERTEX_POINT('',#63337); +#63337 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63338 = LINE('',#63339,#63340); +#63339 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63340 = VECTOR('',#63341,1.); +#63341 = DIRECTION('',(0.,0.,1.)); +#63342 = ORIENTED_EDGE('',*,*,#63343,.T.); +#63343 = EDGE_CURVE('',#63336,#63344,#63346,.T.); +#63344 = VERTEX_POINT('',#63345); +#63345 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63346 = LINE('',#63347,#63348); +#63347 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63348 = VECTOR('',#63349,1.); +#63349 = DIRECTION('',(1.,0.,0.)); +#63350 = ORIENTED_EDGE('',*,*,#63351,.F.); +#63351 = EDGE_CURVE('',#63352,#63344,#63354,.T.); +#63352 = VERTEX_POINT('',#63353); +#63353 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63354 = LINE('',#63355,#63356); +#63355 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63356 = VECTOR('',#63357,1.); +#63357 = DIRECTION('',(0.,0.,1.)); +#63358 = ORIENTED_EDGE('',*,*,#63359,.F.); +#63359 = EDGE_CURVE('',#63334,#63352,#63360,.T.); +#63360 = LINE('',#63361,#63362); +#63361 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63362 = VECTOR('',#63363,1.); +#63363 = DIRECTION('',(1.,0.,0.)); +#63364 = PLANE('',#63365); +#63365 = AXIS2_PLACEMENT_3D('',#63366,#63367,#63368); +#63366 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63367 = DIRECTION('',(0.,1.,0.)); +#63368 = DIRECTION('',(1.,0.,0.)); +#63369 = ADVANCED_FACE('',(#63370),#63395,.F.); +#63370 = FACE_BOUND('',#63371,.F.); +#63371 = EDGE_LOOP('',(#63372,#63380,#63381,#63389)); +#63372 = ORIENTED_EDGE('',*,*,#63373,.F.); +#63373 = EDGE_CURVE('',#63334,#63374,#63376,.T.); +#63374 = VERTEX_POINT('',#63375); +#63375 = CARTESIAN_POINT('',(-9.,-10.975,0.)); +#63376 = LINE('',#63377,#63378); +#63377 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63378 = VECTOR('',#63379,1.); +#63379 = DIRECTION('',(0.,-1.,0.)); +#63380 = ORIENTED_EDGE('',*,*,#63333,.T.); +#63381 = ORIENTED_EDGE('',*,*,#63382,.T.); +#63382 = EDGE_CURVE('',#63336,#63383,#63385,.T.); +#63383 = VERTEX_POINT('',#63384); +#63384 = CARTESIAN_POINT('',(-9.,-10.975,0.4)); +#63385 = LINE('',#63386,#63387); +#63386 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63387 = VECTOR('',#63388,1.); +#63388 = DIRECTION('',(0.,-1.,0.)); +#63389 = ORIENTED_EDGE('',*,*,#63390,.F.); +#63390 = EDGE_CURVE('',#63374,#63383,#63391,.T.); +#63391 = LINE('',#63392,#63393); +#63392 = CARTESIAN_POINT('',(-9.,-10.975,0.8)); +#63393 = VECTOR('',#63394,1.); +#63394 = DIRECTION('',(0.,0.,1.)); +#63395 = PLANE('',#63396); +#63396 = AXIS2_PLACEMENT_3D('',#63397,#63398,#63399); +#63397 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63398 = DIRECTION('',(1.,0.,0.)); +#63399 = DIRECTION('',(0.,-1.,0.)); +#63400 = ADVANCED_FACE('',(#63401),#63426,.F.); +#63401 = FACE_BOUND('',#63402,.F.); +#63402 = EDGE_LOOP('',(#63403,#63411,#63419,#63425)); +#63403 = ORIENTED_EDGE('',*,*,#63404,.T.); +#63404 = EDGE_CURVE('',#63352,#63405,#63407,.T.); +#63405 = VERTEX_POINT('',#63406); +#63406 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#63407 = LINE('',#63408,#63409); +#63408 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63409 = VECTOR('',#63410,1.); +#63410 = DIRECTION('',(1.,0.,0.)); +#63411 = ORIENTED_EDGE('',*,*,#63412,.T.); +#63412 = EDGE_CURVE('',#63405,#63413,#63415,.T.); +#63413 = VERTEX_POINT('',#63414); +#63414 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#63415 = LINE('',#63416,#63417); +#63416 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#63417 = VECTOR('',#63418,1.); +#63418 = DIRECTION('',(0.,0.,1.)); +#63419 = ORIENTED_EDGE('',*,*,#63420,.F.); +#63420 = EDGE_CURVE('',#63344,#63413,#63421,.T.); +#63421 = LINE('',#63422,#63423); +#63422 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63423 = VECTOR('',#63424,1.); +#63424 = DIRECTION('',(1.,0.,0.)); +#63425 = ORIENTED_EDGE('',*,*,#63351,.F.); +#63426 = PLANE('',#63427); +#63427 = AXIS2_PLACEMENT_3D('',#63428,#63429,#63430); +#63428 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63429 = DIRECTION('',(0.,-1.,0.)); +#63430 = DIRECTION('',(0.,0.,1.)); +#63431 = ADVANCED_FACE('',(#63432),#63476,.F.); +#63432 = FACE_BOUND('',#63433,.F.); +#63433 = EDGE_LOOP('',(#63434,#63435,#63436,#63445,#63454,#63462,#63470) + ); +#63434 = ORIENTED_EDGE('',*,*,#63359,.F.); +#63435 = ORIENTED_EDGE('',*,*,#63373,.T.); +#63436 = ORIENTED_EDGE('',*,*,#63437,.F.); +#63437 = EDGE_CURVE('',#63438,#63374,#63440,.T.); +#63438 = VERTEX_POINT('',#63439); +#63439 = CARTESIAN_POINT('',(-8.725,-11.25,0.)); +#63440 = CIRCLE('',#63441,0.275); +#63441 = AXIS2_PLACEMENT_3D('',#63442,#63443,#63444); +#63442 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#63443 = DIRECTION('',(0.,0.,1.)); +#63444 = DIRECTION('',(1.,0.,-0.)); +#63445 = ORIENTED_EDGE('',*,*,#63446,.F.); +#63446 = EDGE_CURVE('',#63447,#63438,#63449,.T.); +#63447 = VERTEX_POINT('',#63448); +#63448 = CARTESIAN_POINT('',(-9.,-11.525,0.)); +#63449 = CIRCLE('',#63450,0.275); +#63450 = AXIS2_PLACEMENT_3D('',#63451,#63452,#63453); +#63451 = CARTESIAN_POINT('',(-9.,-11.25,0.)); +#63452 = DIRECTION('',(0.,0.,1.)); +#63453 = DIRECTION('',(1.,0.,-0.)); +#63454 = ORIENTED_EDGE('',*,*,#63455,.T.); +#63455 = EDGE_CURVE('',#63447,#63456,#63458,.T.); +#63456 = VERTEX_POINT('',#63457); +#63457 = CARTESIAN_POINT('',(-9.,-11.7,0.)); +#63458 = LINE('',#63459,#63460); +#63459 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63460 = VECTOR('',#63461,1.); +#63461 = DIRECTION('',(0.,-1.,0.)); +#63462 = ORIENTED_EDGE('',*,*,#63463,.F.); +#63463 = EDGE_CURVE('',#63464,#63456,#63466,.T.); +#63464 = VERTEX_POINT('',#63465); +#63465 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63466 = LINE('',#63467,#63468); +#63467 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63468 = VECTOR('',#63469,1.); +#63469 = DIRECTION('',(-1.,0.,0.)); +#63470 = ORIENTED_EDGE('',*,*,#63471,.F.); +#63471 = EDGE_CURVE('',#63352,#63464,#63472,.T.); +#63472 = LINE('',#63473,#63474); +#63473 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63474 = VECTOR('',#63475,1.); +#63475 = DIRECTION('',(0.,-1.,0.)); +#63476 = PLANE('',#63477); +#63477 = AXIS2_PLACEMENT_3D('',#63478,#63479,#63480); +#63478 = CARTESIAN_POINT('',(-8.775,-11.25,0.)); +#63479 = DIRECTION('',(0.,0.,1.)); +#63480 = DIRECTION('',(1.,0.,-0.)); +#63481 = ADVANCED_FACE('',(#63482),#63507,.T.); +#63482 = FACE_BOUND('',#63483,.T.); +#63483 = EDGE_LOOP('',(#63484,#63492,#63500,#63506)); +#63484 = ORIENTED_EDGE('',*,*,#63485,.T.); +#63485 = EDGE_CURVE('',#63336,#63486,#63488,.T.); +#63486 = VERTEX_POINT('',#63487); +#63487 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#63488 = LINE('',#63489,#63490); +#63489 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63490 = VECTOR('',#63491,1.); +#63491 = DIRECTION('',(0.,0.,1.)); +#63492 = ORIENTED_EDGE('',*,*,#63493,.T.); +#63493 = EDGE_CURVE('',#63486,#63494,#63496,.T.); +#63494 = VERTEX_POINT('',#63495); +#63495 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#63496 = LINE('',#63497,#63498); +#63497 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#63498 = VECTOR('',#63499,1.); +#63499 = DIRECTION('',(1.,0.,0.)); +#63500 = ORIENTED_EDGE('',*,*,#63501,.F.); +#63501 = EDGE_CURVE('',#63344,#63494,#63502,.T.); +#63502 = LINE('',#63503,#63504); +#63503 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63504 = VECTOR('',#63505,1.); +#63505 = DIRECTION('',(0.,0.,1.)); +#63506 = ORIENTED_EDGE('',*,*,#63343,.F.); +#63507 = PLANE('',#63508); +#63508 = AXIS2_PLACEMENT_3D('',#63509,#63510,#63511); +#63509 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63510 = DIRECTION('',(0.,1.,0.)); +#63511 = DIRECTION('',(1.,0.,0.)); +#63512 = ADVANCED_FACE('',(#63513),#63540,.F.); +#63513 = FACE_BOUND('',#63514,.F.); +#63514 = EDGE_LOOP('',(#63515,#63526,#63532,#63533,#63534)); +#63515 = ORIENTED_EDGE('',*,*,#63516,.F.); +#63516 = EDGE_CURVE('',#63517,#63519,#63521,.T.); +#63517 = VERTEX_POINT('',#63518); +#63518 = CARTESIAN_POINT('',(-8.725,-11.25,0.8)); +#63519 = VERTEX_POINT('',#63520); +#63520 = CARTESIAN_POINT('',(-9.,-10.975,0.8)); +#63521 = CIRCLE('',#63522,0.275); +#63522 = AXIS2_PLACEMENT_3D('',#63523,#63524,#63525); +#63523 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#63524 = DIRECTION('',(0.,0.,1.)); +#63525 = DIRECTION('',(1.,0.,-0.)); +#63526 = ORIENTED_EDGE('',*,*,#63527,.T.); +#63527 = EDGE_CURVE('',#63517,#63438,#63528,.T.); +#63528 = LINE('',#63529,#63530); +#63529 = CARTESIAN_POINT('',(-8.725,-11.25,0.8)); +#63530 = VECTOR('',#63531,1.); +#63531 = DIRECTION('',(-0.,-0.,-1.)); +#63532 = ORIENTED_EDGE('',*,*,#63437,.T.); +#63533 = ORIENTED_EDGE('',*,*,#63390,.T.); +#63534 = ORIENTED_EDGE('',*,*,#63535,.T.); +#63535 = EDGE_CURVE('',#63383,#63519,#63536,.T.); +#63536 = LINE('',#63537,#63538); +#63537 = CARTESIAN_POINT('',(-9.,-10.975,0.8)); +#63538 = VECTOR('',#63539,1.); +#63539 = DIRECTION('',(0.,0.,1.)); +#63540 = CYLINDRICAL_SURFACE('',#63541,0.275); +#63541 = AXIS2_PLACEMENT_3D('',#63542,#63543,#63544); +#63542 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#63543 = DIRECTION('',(0.,0.,1.)); +#63544 = DIRECTION('',(1.,0.,-0.)); +#63545 = ADVANCED_FACE('',(#63546),#63557,.F.); +#63546 = FACE_BOUND('',#63547,.F.); +#63547 = EDGE_LOOP('',(#63548,#63549,#63550,#63556)); +#63548 = ORIENTED_EDGE('',*,*,#63382,.F.); +#63549 = ORIENTED_EDGE('',*,*,#63485,.T.); +#63550 = ORIENTED_EDGE('',*,*,#63551,.T.); +#63551 = EDGE_CURVE('',#63486,#63519,#63552,.T.); +#63552 = LINE('',#63553,#63554); +#63553 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#63554 = VECTOR('',#63555,1.); +#63555 = DIRECTION('',(0.,-1.,0.)); +#63556 = ORIENTED_EDGE('',*,*,#63535,.F.); +#63557 = PLANE('',#63558); +#63558 = AXIS2_PLACEMENT_3D('',#63559,#63560,#63561); +#63559 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63560 = DIRECTION('',(1.,0.,0.)); +#63561 = DIRECTION('',(0.,-1.,0.)); +#63562 = ADVANCED_FACE('',(#63563),#63581,.T.); +#63563 = FACE_BOUND('',#63564,.T.); +#63564 = EDGE_LOOP('',(#63565,#63566,#63574,#63580)); +#63565 = ORIENTED_EDGE('',*,*,#63404,.T.); +#63566 = ORIENTED_EDGE('',*,*,#63567,.T.); +#63567 = EDGE_CURVE('',#63405,#63568,#63570,.T.); +#63568 = VERTEX_POINT('',#63569); +#63569 = CARTESIAN_POINT('',(-8.15,-11.7,0.)); +#63570 = LINE('',#63571,#63572); +#63571 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#63572 = VECTOR('',#63573,1.); +#63573 = DIRECTION('',(0.,-1.,0.)); +#63574 = ORIENTED_EDGE('',*,*,#63575,.F.); +#63575 = EDGE_CURVE('',#63464,#63568,#63576,.T.); +#63576 = LINE('',#63577,#63578); +#63577 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63578 = VECTOR('',#63579,1.); +#63579 = DIRECTION('',(1.,0.,0.)); +#63580 = ORIENTED_EDGE('',*,*,#63471,.F.); +#63581 = PLANE('',#63582); +#63582 = AXIS2_PLACEMENT_3D('',#63583,#63584,#63585); +#63583 = CARTESIAN_POINT('',(-8.55,-10.8,0.)); +#63584 = DIRECTION('',(0.,0.,-1.)); +#63585 = DIRECTION('',(0.,-1.,0.)); +#63586 = ADVANCED_FACE('',(#63587),#63612,.F.); +#63587 = FACE_BOUND('',#63588,.F.); +#63588 = EDGE_LOOP('',(#63589,#63590,#63598,#63606)); +#63589 = ORIENTED_EDGE('',*,*,#63420,.T.); +#63590 = ORIENTED_EDGE('',*,*,#63591,.T.); +#63591 = EDGE_CURVE('',#63413,#63592,#63594,.T.); +#63592 = VERTEX_POINT('',#63593); +#63593 = CARTESIAN_POINT('',(-8.15,-11.7,0.4)); +#63594 = LINE('',#63595,#63596); +#63595 = CARTESIAN_POINT('',(-8.15,-10.8,0.4)); +#63596 = VECTOR('',#63597,1.); +#63597 = DIRECTION('',(0.,-1.,0.)); +#63598 = ORIENTED_EDGE('',*,*,#63599,.F.); +#63599 = EDGE_CURVE('',#63600,#63592,#63602,.T.); +#63600 = VERTEX_POINT('',#63601); +#63601 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#63602 = LINE('',#63603,#63604); +#63603 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#63604 = VECTOR('',#63605,1.); +#63605 = DIRECTION('',(1.,0.,0.)); +#63606 = ORIENTED_EDGE('',*,*,#63607,.F.); +#63607 = EDGE_CURVE('',#63344,#63600,#63608,.T.); +#63608 = LINE('',#63609,#63610); +#63609 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63610 = VECTOR('',#63611,1.); +#63611 = DIRECTION('',(0.,-1.,0.)); +#63612 = PLANE('',#63613); +#63613 = AXIS2_PLACEMENT_3D('',#63614,#63615,#63616); +#63614 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63615 = DIRECTION('',(0.,0.,-1.)); +#63616 = DIRECTION('',(0.,-1.,0.)); +#63617 = ADVANCED_FACE('',(#63618),#63629,.T.); +#63618 = FACE_BOUND('',#63619,.T.); +#63619 = EDGE_LOOP('',(#63620,#63621,#63622,#63628)); +#63620 = ORIENTED_EDGE('',*,*,#63412,.T.); +#63621 = ORIENTED_EDGE('',*,*,#63591,.T.); +#63622 = ORIENTED_EDGE('',*,*,#63623,.F.); +#63623 = EDGE_CURVE('',#63568,#63592,#63624,.T.); +#63624 = LINE('',#63625,#63626); +#63625 = CARTESIAN_POINT('',(-8.15,-11.7,0.)); +#63626 = VECTOR('',#63627,1.); +#63627 = DIRECTION('',(0.,0.,1.)); +#63628 = ORIENTED_EDGE('',*,*,#63567,.F.); +#63629 = PLANE('',#63630); +#63630 = AXIS2_PLACEMENT_3D('',#63631,#63632,#63633); +#63631 = CARTESIAN_POINT('',(-8.15,-10.8,0.)); +#63632 = DIRECTION('',(1.,0.,0.)); +#63633 = DIRECTION('',(0.,-1.,0.)); +#63634 = ADVANCED_FACE('',(#63635),#63658,.T.); +#63635 = FACE_BOUND('',#63636,.T.); +#63636 = EDGE_LOOP('',(#63637,#63643,#63651,#63657)); +#63637 = ORIENTED_EDGE('',*,*,#63638,.T.); +#63638 = EDGE_CURVE('',#63464,#63600,#63639,.T.); +#63639 = LINE('',#63640,#63641); +#63640 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63641 = VECTOR('',#63642,1.); +#63642 = DIRECTION('',(0.,0.,1.)); +#63643 = ORIENTED_EDGE('',*,*,#63644,.T.); +#63644 = EDGE_CURVE('',#63600,#63645,#63647,.T.); +#63645 = VERTEX_POINT('',#63646); +#63646 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#63647 = LINE('',#63648,#63649); +#63648 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#63649 = VECTOR('',#63650,1.); +#63650 = DIRECTION('',(-1.,0.,0.)); +#63651 = ORIENTED_EDGE('',*,*,#63652,.F.); +#63652 = EDGE_CURVE('',#63456,#63645,#63653,.T.); +#63653 = LINE('',#63654,#63655); +#63654 = CARTESIAN_POINT('',(-9.,-11.7,0.)); +#63655 = VECTOR('',#63656,1.); +#63656 = DIRECTION('',(0.,0.,1.)); +#63657 = ORIENTED_EDGE('',*,*,#63463,.F.); +#63658 = PLANE('',#63659); +#63659 = AXIS2_PLACEMENT_3D('',#63660,#63661,#63662); +#63660 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63661 = DIRECTION('',(0.,-1.,0.)); +#63662 = DIRECTION('',(-1.,0.,0.)); +#63663 = ADVANCED_FACE('',(#63664),#63682,.F.); +#63664 = FACE_BOUND('',#63665,.F.); +#63665 = EDGE_LOOP('',(#63666,#63667,#63675,#63681)); +#63666 = ORIENTED_EDGE('',*,*,#63455,.F.); +#63667 = ORIENTED_EDGE('',*,*,#63668,.T.); +#63668 = EDGE_CURVE('',#63447,#63669,#63671,.T.); +#63669 = VERTEX_POINT('',#63670); +#63670 = CARTESIAN_POINT('',(-9.,-11.525,0.4)); +#63671 = LINE('',#63672,#63673); +#63672 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#63673 = VECTOR('',#63674,1.); +#63674 = DIRECTION('',(0.,0.,1.)); +#63675 = ORIENTED_EDGE('',*,*,#63676,.T.); +#63676 = EDGE_CURVE('',#63669,#63645,#63677,.T.); +#63677 = LINE('',#63678,#63679); +#63678 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63679 = VECTOR('',#63680,1.); +#63680 = DIRECTION('',(0.,-1.,0.)); +#63681 = ORIENTED_EDGE('',*,*,#63652,.F.); +#63682 = PLANE('',#63683); +#63683 = AXIS2_PLACEMENT_3D('',#63684,#63685,#63686); +#63684 = CARTESIAN_POINT('',(-9.,-10.8,0.)); +#63685 = DIRECTION('',(1.,0.,0.)); +#63686 = DIRECTION('',(0.,-1.,0.)); +#63687 = ADVANCED_FACE('',(#63688),#63708,.F.); +#63688 = FACE_BOUND('',#63689,.F.); +#63689 = EDGE_LOOP('',(#63690,#63691,#63700,#63706,#63707)); +#63690 = ORIENTED_EDGE('',*,*,#63527,.F.); +#63691 = ORIENTED_EDGE('',*,*,#63692,.F.); +#63692 = EDGE_CURVE('',#63693,#63517,#63695,.T.); +#63693 = VERTEX_POINT('',#63694); +#63694 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#63695 = CIRCLE('',#63696,0.275); +#63696 = AXIS2_PLACEMENT_3D('',#63697,#63698,#63699); +#63697 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#63698 = DIRECTION('',(0.,0.,1.)); +#63699 = DIRECTION('',(1.,0.,-0.)); +#63700 = ORIENTED_EDGE('',*,*,#63701,.F.); +#63701 = EDGE_CURVE('',#63669,#63693,#63702,.T.); +#63702 = LINE('',#63703,#63704); +#63703 = CARTESIAN_POINT('',(-9.,-11.525,0.8)); +#63704 = VECTOR('',#63705,1.); +#63705 = DIRECTION('',(0.,0.,1.)); +#63706 = ORIENTED_EDGE('',*,*,#63668,.F.); +#63707 = ORIENTED_EDGE('',*,*,#63446,.T.); +#63708 = CYLINDRICAL_SURFACE('',#63709,0.275); +#63709 = AXIS2_PLACEMENT_3D('',#63710,#63711,#63712); +#63710 = CARTESIAN_POINT('',(-9.,-11.25,0.8)); +#63711 = DIRECTION('',(0.,0.,1.)); +#63712 = DIRECTION('',(1.,0.,-0.)); +#63713 = ADVANCED_FACE('',(#63714),#63732,.T.); +#63714 = FACE_BOUND('',#63715,.T.); +#63715 = EDGE_LOOP('',(#63716,#63717,#63725,#63731)); +#63716 = ORIENTED_EDGE('',*,*,#63501,.T.); +#63717 = ORIENTED_EDGE('',*,*,#63718,.T.); +#63718 = EDGE_CURVE('',#63494,#63719,#63721,.T.); +#63719 = VERTEX_POINT('',#63720); +#63720 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#63721 = LINE('',#63722,#63723); +#63722 = CARTESIAN_POINT('',(-8.55,-10.8,0.8)); +#63723 = VECTOR('',#63724,1.); +#63724 = DIRECTION('',(0.,-1.,0.)); +#63725 = ORIENTED_EDGE('',*,*,#63726,.F.); +#63726 = EDGE_CURVE('',#63600,#63719,#63727,.T.); +#63727 = LINE('',#63728,#63729); +#63728 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#63729 = VECTOR('',#63730,1.); +#63730 = DIRECTION('',(0.,0.,1.)); +#63731 = ORIENTED_EDGE('',*,*,#63607,.F.); +#63732 = PLANE('',#63733); +#63733 = AXIS2_PLACEMENT_3D('',#63734,#63735,#63736); +#63734 = CARTESIAN_POINT('',(-8.55,-10.8,0.4)); +#63735 = DIRECTION('',(1.,0.,0.)); +#63736 = DIRECTION('',(0.,-1.,0.)); +#63737 = ADVANCED_FACE('',(#63738),#63759,.T.); +#63738 = FACE_BOUND('',#63739,.T.); +#63739 = EDGE_LOOP('',(#63740,#63741,#63742,#63743,#63744,#63752,#63758) + ); +#63740 = ORIENTED_EDGE('',*,*,#63493,.F.); +#63741 = ORIENTED_EDGE('',*,*,#63551,.T.); +#63742 = ORIENTED_EDGE('',*,*,#63516,.F.); +#63743 = ORIENTED_EDGE('',*,*,#63692,.F.); +#63744 = ORIENTED_EDGE('',*,*,#63745,.T.); +#63745 = EDGE_CURVE('',#63693,#63746,#63748,.T.); +#63746 = VERTEX_POINT('',#63747); +#63747 = CARTESIAN_POINT('',(-9.,-11.7,0.8)); +#63748 = LINE('',#63749,#63750); +#63749 = CARTESIAN_POINT('',(-9.,-10.8,0.8)); +#63750 = VECTOR('',#63751,1.); +#63751 = DIRECTION('',(0.,-1.,0.)); +#63752 = ORIENTED_EDGE('',*,*,#63753,.F.); +#63753 = EDGE_CURVE('',#63719,#63746,#63754,.T.); +#63754 = LINE('',#63755,#63756); +#63755 = CARTESIAN_POINT('',(-8.55,-11.7,0.8)); +#63756 = VECTOR('',#63757,1.); +#63757 = DIRECTION('',(-1.,0.,0.)); +#63758 = ORIENTED_EDGE('',*,*,#63718,.F.); +#63759 = PLANE('',#63760); +#63760 = AXIS2_PLACEMENT_3D('',#63761,#63762,#63763); +#63761 = CARTESIAN_POINT('',(-8.775,-11.25,0.8)); +#63762 = DIRECTION('',(0.,0.,1.)); +#63763 = DIRECTION('',(1.,0.,-0.)); +#63764 = ADVANCED_FACE('',(#63765),#63771,.T.); +#63765 = FACE_BOUND('',#63766,.T.); +#63766 = EDGE_LOOP('',(#63767,#63768,#63769,#63770)); +#63767 = ORIENTED_EDGE('',*,*,#63575,.T.); +#63768 = ORIENTED_EDGE('',*,*,#63623,.T.); +#63769 = ORIENTED_EDGE('',*,*,#63599,.F.); +#63770 = ORIENTED_EDGE('',*,*,#63638,.F.); +#63771 = PLANE('',#63772); +#63772 = AXIS2_PLACEMENT_3D('',#63773,#63774,#63775); +#63773 = CARTESIAN_POINT('',(-8.55,-11.7,0.)); +#63774 = DIRECTION('',(0.,-1.,0.)); +#63775 = DIRECTION('',(0.,0.,1.)); +#63776 = ADVANCED_FACE('',(#63777),#63788,.T.); +#63777 = FACE_BOUND('',#63778,.T.); +#63778 = EDGE_LOOP('',(#63779,#63780,#63781,#63787)); +#63779 = ORIENTED_EDGE('',*,*,#63726,.T.); +#63780 = ORIENTED_EDGE('',*,*,#63753,.T.); +#63781 = ORIENTED_EDGE('',*,*,#63782,.F.); +#63782 = EDGE_CURVE('',#63645,#63746,#63783,.T.); +#63783 = LINE('',#63784,#63785); +#63784 = CARTESIAN_POINT('',(-9.,-11.7,0.4)); +#63785 = VECTOR('',#63786,1.); +#63786 = DIRECTION('',(0.,0.,1.)); +#63787 = ORIENTED_EDGE('',*,*,#63644,.F.); +#63788 = PLANE('',#63789); +#63789 = AXIS2_PLACEMENT_3D('',#63790,#63791,#63792); +#63790 = CARTESIAN_POINT('',(-8.55,-11.7,0.4)); +#63791 = DIRECTION('',(0.,-1.,0.)); +#63792 = DIRECTION('',(-1.,0.,0.)); +#63793 = ADVANCED_FACE('',(#63794),#63800,.F.); +#63794 = FACE_BOUND('',#63795,.F.); +#63795 = EDGE_LOOP('',(#63796,#63797,#63798,#63799)); +#63796 = ORIENTED_EDGE('',*,*,#63676,.F.); +#63797 = ORIENTED_EDGE('',*,*,#63701,.T.); +#63798 = ORIENTED_EDGE('',*,*,#63745,.T.); +#63799 = ORIENTED_EDGE('',*,*,#63782,.F.); +#63800 = PLANE('',#63801); +#63801 = AXIS2_PLACEMENT_3D('',#63802,#63803,#63804); +#63802 = CARTESIAN_POINT('',(-9.,-10.8,0.4)); +#63803 = DIRECTION('',(1.,0.,0.)); +#63804 = DIRECTION('',(0.,-1.,0.)); +#63805 = MANIFOLD_SOLID_BREP('',#63806); +#63806 = CLOSED_SHELL('',(#63807,#63847,#63878,#63909,#63959,#63990, + #64023,#64040,#64064,#64095,#64112,#64141,#64165,#64191,#64215, + #64242,#64254,#64271)); +#63807 = ADVANCED_FACE('',(#63808),#63842,.T.); +#63808 = FACE_BOUND('',#63809,.T.); +#63809 = EDGE_LOOP('',(#63810,#63820,#63828,#63836)); +#63810 = ORIENTED_EDGE('',*,*,#63811,.T.); +#63811 = EDGE_CURVE('',#63812,#63814,#63816,.T.); +#63812 = VERTEX_POINT('',#63813); +#63813 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63814 = VERTEX_POINT('',#63815); +#63815 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#63816 = LINE('',#63817,#63818); +#63817 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63818 = VECTOR('',#63819,1.); +#63819 = DIRECTION('',(0.,0.,1.)); +#63820 = ORIENTED_EDGE('',*,*,#63821,.T.); +#63821 = EDGE_CURVE('',#63814,#63822,#63824,.T.); +#63822 = VERTEX_POINT('',#63823); +#63823 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#63824 = LINE('',#63825,#63826); +#63825 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#63826 = VECTOR('',#63827,1.); +#63827 = DIRECTION('',(0.,1.,0.)); +#63828 = ORIENTED_EDGE('',*,*,#63829,.F.); +#63829 = EDGE_CURVE('',#63830,#63822,#63832,.T.); +#63830 = VERTEX_POINT('',#63831); +#63831 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#63832 = LINE('',#63833,#63834); +#63833 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#63834 = VECTOR('',#63835,1.); +#63835 = DIRECTION('',(0.,0.,1.)); +#63836 = ORIENTED_EDGE('',*,*,#63837,.F.); +#63837 = EDGE_CURVE('',#63812,#63830,#63838,.T.); +#63838 = LINE('',#63839,#63840); +#63839 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63840 = VECTOR('',#63841,1.); +#63841 = DIRECTION('',(0.,1.,0.)); +#63842 = PLANE('',#63843); +#63843 = AXIS2_PLACEMENT_3D('',#63844,#63845,#63846); +#63844 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63845 = DIRECTION('',(-1.,0.,0.)); +#63846 = DIRECTION('',(0.,1.,0.)); +#63847 = ADVANCED_FACE('',(#63848),#63873,.F.); +#63848 = FACE_BOUND('',#63849,.F.); +#63849 = EDGE_LOOP('',(#63850,#63858,#63859,#63867)); +#63850 = ORIENTED_EDGE('',*,*,#63851,.F.); +#63851 = EDGE_CURVE('',#63812,#63852,#63854,.T.); +#63852 = VERTEX_POINT('',#63853); +#63853 = CARTESIAN_POINT('',(-7.26,-12.75,0.)); +#63854 = LINE('',#63855,#63856); +#63855 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63856 = VECTOR('',#63857,1.); +#63857 = DIRECTION('',(1.,0.,0.)); +#63858 = ORIENTED_EDGE('',*,*,#63811,.T.); +#63859 = ORIENTED_EDGE('',*,*,#63860,.T.); +#63860 = EDGE_CURVE('',#63814,#63861,#63863,.T.); +#63861 = VERTEX_POINT('',#63862); +#63862 = CARTESIAN_POINT('',(-7.26,-12.75,0.4)); +#63863 = LINE('',#63864,#63865); +#63864 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#63865 = VECTOR('',#63866,1.); +#63866 = DIRECTION('',(1.,0.,0.)); +#63867 = ORIENTED_EDGE('',*,*,#63868,.F.); +#63868 = EDGE_CURVE('',#63852,#63861,#63869,.T.); +#63869 = LINE('',#63870,#63871); +#63870 = CARTESIAN_POINT('',(-7.26,-12.75,0.8)); +#63871 = VECTOR('',#63872,1.); +#63872 = DIRECTION('',(0.,0.,1.)); +#63873 = PLANE('',#63874); +#63874 = AXIS2_PLACEMENT_3D('',#63875,#63876,#63877); +#63875 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63876 = DIRECTION('',(0.,1.,0.)); +#63877 = DIRECTION('',(1.,0.,0.)); +#63878 = ADVANCED_FACE('',(#63879),#63904,.F.); +#63879 = FACE_BOUND('',#63880,.F.); +#63880 = EDGE_LOOP('',(#63881,#63889,#63897,#63903)); +#63881 = ORIENTED_EDGE('',*,*,#63882,.T.); +#63882 = EDGE_CURVE('',#63830,#63883,#63885,.T.); +#63883 = VERTEX_POINT('',#63884); +#63884 = CARTESIAN_POINT('',(-7.435,-11.9,0.)); +#63885 = LINE('',#63886,#63887); +#63886 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#63887 = VECTOR('',#63888,1.); +#63888 = DIRECTION('',(0.,1.,0.)); +#63889 = ORIENTED_EDGE('',*,*,#63890,.T.); +#63890 = EDGE_CURVE('',#63883,#63891,#63893,.T.); +#63891 = VERTEX_POINT('',#63892); +#63892 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#63893 = LINE('',#63894,#63895); +#63894 = CARTESIAN_POINT('',(-7.435,-11.9,0.)); +#63895 = VECTOR('',#63896,1.); +#63896 = DIRECTION('',(0.,0.,1.)); +#63897 = ORIENTED_EDGE('',*,*,#63898,.F.); +#63898 = EDGE_CURVE('',#63822,#63891,#63899,.T.); +#63899 = LINE('',#63900,#63901); +#63900 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#63901 = VECTOR('',#63902,1.); +#63902 = DIRECTION('',(0.,1.,0.)); +#63903 = ORIENTED_EDGE('',*,*,#63829,.F.); +#63904 = PLANE('',#63905); +#63905 = AXIS2_PLACEMENT_3D('',#63906,#63907,#63908); +#63906 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#63907 = DIRECTION('',(1.,0.,0.)); +#63908 = DIRECTION('',(0.,0.,1.)); +#63909 = ADVANCED_FACE('',(#63910),#63954,.F.); +#63910 = FACE_BOUND('',#63911,.F.); +#63911 = EDGE_LOOP('',(#63912,#63913,#63914,#63923,#63932,#63940,#63948) + ); +#63912 = ORIENTED_EDGE('',*,*,#63837,.F.); +#63913 = ORIENTED_EDGE('',*,*,#63851,.T.); +#63914 = ORIENTED_EDGE('',*,*,#63915,.F.); +#63915 = EDGE_CURVE('',#63916,#63852,#63918,.T.); +#63916 = VERTEX_POINT('',#63917); +#63917 = CARTESIAN_POINT('',(-6.985,-12.475,0.)); +#63918 = CIRCLE('',#63919,0.275); +#63919 = AXIS2_PLACEMENT_3D('',#63920,#63921,#63922); +#63920 = CARTESIAN_POINT('',(-6.985,-12.75,0.)); +#63921 = DIRECTION('',(0.,-0.,1.)); +#63922 = DIRECTION('',(0.,1.,0.)); +#63923 = ORIENTED_EDGE('',*,*,#63924,.F.); +#63924 = EDGE_CURVE('',#63925,#63916,#63927,.T.); +#63925 = VERTEX_POINT('',#63926); +#63926 = CARTESIAN_POINT('',(-6.71,-12.75,0.)); +#63927 = CIRCLE('',#63928,0.275); +#63928 = AXIS2_PLACEMENT_3D('',#63929,#63930,#63931); +#63929 = CARTESIAN_POINT('',(-6.985,-12.75,0.)); +#63930 = DIRECTION('',(0.,-0.,1.)); +#63931 = DIRECTION('',(0.,1.,0.)); +#63932 = ORIENTED_EDGE('',*,*,#63933,.T.); +#63933 = EDGE_CURVE('',#63925,#63934,#63936,.T.); +#63934 = VERTEX_POINT('',#63935); +#63935 = CARTESIAN_POINT('',(-6.535,-12.75,0.)); +#63936 = LINE('',#63937,#63938); +#63937 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#63938 = VECTOR('',#63939,1.); +#63939 = DIRECTION('',(1.,0.,0.)); +#63940 = ORIENTED_EDGE('',*,*,#63941,.F.); +#63941 = EDGE_CURVE('',#63942,#63934,#63944,.T.); +#63942 = VERTEX_POINT('',#63943); +#63943 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#63944 = LINE('',#63945,#63946); +#63945 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#63946 = VECTOR('',#63947,1.); +#63947 = DIRECTION('',(0.,-1.,0.)); +#63948 = ORIENTED_EDGE('',*,*,#63949,.F.); +#63949 = EDGE_CURVE('',#63830,#63942,#63950,.T.); +#63950 = LINE('',#63951,#63952); +#63951 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#63952 = VECTOR('',#63953,1.); +#63953 = DIRECTION('',(1.,0.,0.)); +#63954 = PLANE('',#63955); +#63955 = AXIS2_PLACEMENT_3D('',#63956,#63957,#63958); +#63956 = CARTESIAN_POINT('',(-6.985,-12.525,0.)); +#63957 = DIRECTION('',(0.,0.,1.)); +#63958 = DIRECTION('',(0.,1.,0.)); +#63959 = ADVANCED_FACE('',(#63960),#63985,.T.); +#63960 = FACE_BOUND('',#63961,.T.); +#63961 = EDGE_LOOP('',(#63962,#63970,#63978,#63984)); +#63962 = ORIENTED_EDGE('',*,*,#63963,.T.); +#63963 = EDGE_CURVE('',#63814,#63964,#63966,.T.); +#63964 = VERTEX_POINT('',#63965); +#63965 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#63966 = LINE('',#63967,#63968); +#63967 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#63968 = VECTOR('',#63969,1.); +#63969 = DIRECTION('',(0.,0.,1.)); +#63970 = ORIENTED_EDGE('',*,*,#63971,.T.); +#63971 = EDGE_CURVE('',#63964,#63972,#63974,.T.); +#63972 = VERTEX_POINT('',#63973); +#63973 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#63974 = LINE('',#63975,#63976); +#63975 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#63976 = VECTOR('',#63977,1.); +#63977 = DIRECTION('',(0.,1.,0.)); +#63978 = ORIENTED_EDGE('',*,*,#63979,.F.); +#63979 = EDGE_CURVE('',#63822,#63972,#63980,.T.); +#63980 = LINE('',#63981,#63982); +#63981 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#63982 = VECTOR('',#63983,1.); +#63983 = DIRECTION('',(0.,0.,1.)); +#63984 = ORIENTED_EDGE('',*,*,#63821,.F.); +#63985 = PLANE('',#63986); +#63986 = AXIS2_PLACEMENT_3D('',#63987,#63988,#63989); +#63987 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#63988 = DIRECTION('',(-1.,0.,0.)); +#63989 = DIRECTION('',(0.,1.,0.)); +#63990 = ADVANCED_FACE('',(#63991),#64018,.F.); +#63991 = FACE_BOUND('',#63992,.F.); +#63992 = EDGE_LOOP('',(#63993,#64004,#64010,#64011,#64012)); +#63993 = ORIENTED_EDGE('',*,*,#63994,.F.); +#63994 = EDGE_CURVE('',#63995,#63997,#63999,.T.); +#63995 = VERTEX_POINT('',#63996); +#63996 = CARTESIAN_POINT('',(-6.985,-12.475,0.8)); +#63997 = VERTEX_POINT('',#63998); +#63998 = CARTESIAN_POINT('',(-7.26,-12.75,0.8)); +#63999 = CIRCLE('',#64000,0.275); +#64000 = AXIS2_PLACEMENT_3D('',#64001,#64002,#64003); +#64001 = CARTESIAN_POINT('',(-6.985,-12.75,0.8)); +#64002 = DIRECTION('',(0.,-0.,1.)); +#64003 = DIRECTION('',(0.,1.,0.)); +#64004 = ORIENTED_EDGE('',*,*,#64005,.T.); +#64005 = EDGE_CURVE('',#63995,#63916,#64006,.T.); +#64006 = LINE('',#64007,#64008); +#64007 = CARTESIAN_POINT('',(-6.985,-12.475,0.8)); +#64008 = VECTOR('',#64009,1.); +#64009 = DIRECTION('',(0.,-0.,-1.)); +#64010 = ORIENTED_EDGE('',*,*,#63915,.T.); +#64011 = ORIENTED_EDGE('',*,*,#63868,.T.); +#64012 = ORIENTED_EDGE('',*,*,#64013,.T.); +#64013 = EDGE_CURVE('',#63861,#63997,#64014,.T.); +#64014 = LINE('',#64015,#64016); +#64015 = CARTESIAN_POINT('',(-7.26,-12.75,0.8)); +#64016 = VECTOR('',#64017,1.); +#64017 = DIRECTION('',(0.,0.,1.)); +#64018 = CYLINDRICAL_SURFACE('',#64019,0.275); +#64019 = AXIS2_PLACEMENT_3D('',#64020,#64021,#64022); +#64020 = CARTESIAN_POINT('',(-6.985,-12.75,0.8)); +#64021 = DIRECTION('',(0.,0.,1.)); +#64022 = DIRECTION('',(0.,1.,0.)); +#64023 = ADVANCED_FACE('',(#64024),#64035,.F.); +#64024 = FACE_BOUND('',#64025,.F.); +#64025 = EDGE_LOOP('',(#64026,#64027,#64028,#64034)); +#64026 = ORIENTED_EDGE('',*,*,#63860,.F.); +#64027 = ORIENTED_EDGE('',*,*,#63963,.T.); +#64028 = ORIENTED_EDGE('',*,*,#64029,.T.); +#64029 = EDGE_CURVE('',#63964,#63997,#64030,.T.); +#64030 = LINE('',#64031,#64032); +#64031 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#64032 = VECTOR('',#64033,1.); +#64033 = DIRECTION('',(1.,0.,0.)); +#64034 = ORIENTED_EDGE('',*,*,#64013,.F.); +#64035 = PLANE('',#64036); +#64036 = AXIS2_PLACEMENT_3D('',#64037,#64038,#64039); +#64037 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#64038 = DIRECTION('',(0.,1.,0.)); +#64039 = DIRECTION('',(1.,0.,0.)); +#64040 = ADVANCED_FACE('',(#64041),#64059,.T.); +#64041 = FACE_BOUND('',#64042,.T.); +#64042 = EDGE_LOOP('',(#64043,#64044,#64052,#64058)); +#64043 = ORIENTED_EDGE('',*,*,#63882,.T.); +#64044 = ORIENTED_EDGE('',*,*,#64045,.T.); +#64045 = EDGE_CURVE('',#63883,#64046,#64048,.T.); +#64046 = VERTEX_POINT('',#64047); +#64047 = CARTESIAN_POINT('',(-6.535,-11.9,0.)); +#64048 = LINE('',#64049,#64050); +#64049 = CARTESIAN_POINT('',(-7.435,-11.9,0.)); +#64050 = VECTOR('',#64051,1.); +#64051 = DIRECTION('',(1.,0.,0.)); +#64052 = ORIENTED_EDGE('',*,*,#64053,.F.); +#64053 = EDGE_CURVE('',#63942,#64046,#64054,.T.); +#64054 = LINE('',#64055,#64056); +#64055 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#64056 = VECTOR('',#64057,1.); +#64057 = DIRECTION('',(0.,1.,0.)); +#64058 = ORIENTED_EDGE('',*,*,#63949,.F.); +#64059 = PLANE('',#64060); +#64060 = AXIS2_PLACEMENT_3D('',#64061,#64062,#64063); +#64061 = CARTESIAN_POINT('',(-7.435,-12.3,0.)); +#64062 = DIRECTION('',(0.,0.,-1.)); +#64063 = DIRECTION('',(1.,0.,0.)); +#64064 = ADVANCED_FACE('',(#64065),#64090,.F.); +#64065 = FACE_BOUND('',#64066,.F.); +#64066 = EDGE_LOOP('',(#64067,#64068,#64076,#64084)); +#64067 = ORIENTED_EDGE('',*,*,#63898,.T.); +#64068 = ORIENTED_EDGE('',*,*,#64069,.T.); +#64069 = EDGE_CURVE('',#63891,#64070,#64072,.T.); +#64070 = VERTEX_POINT('',#64071); +#64071 = CARTESIAN_POINT('',(-6.535,-11.9,0.4)); +#64072 = LINE('',#64073,#64074); +#64073 = CARTESIAN_POINT('',(-7.435,-11.9,0.4)); +#64074 = VECTOR('',#64075,1.); +#64075 = DIRECTION('',(1.,0.,0.)); +#64076 = ORIENTED_EDGE('',*,*,#64077,.F.); +#64077 = EDGE_CURVE('',#64078,#64070,#64080,.T.); +#64078 = VERTEX_POINT('',#64079); +#64079 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#64080 = LINE('',#64081,#64082); +#64081 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#64082 = VECTOR('',#64083,1.); +#64083 = DIRECTION('',(0.,1.,0.)); +#64084 = ORIENTED_EDGE('',*,*,#64085,.F.); +#64085 = EDGE_CURVE('',#63822,#64078,#64086,.T.); +#64086 = LINE('',#64087,#64088); +#64087 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#64088 = VECTOR('',#64089,1.); +#64089 = DIRECTION('',(1.,0.,0.)); +#64090 = PLANE('',#64091); +#64091 = AXIS2_PLACEMENT_3D('',#64092,#64093,#64094); +#64092 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#64093 = DIRECTION('',(0.,0.,-1.)); +#64094 = DIRECTION('',(1.,0.,0.)); +#64095 = ADVANCED_FACE('',(#64096),#64107,.T.); +#64096 = FACE_BOUND('',#64097,.T.); +#64097 = EDGE_LOOP('',(#64098,#64099,#64100,#64106)); +#64098 = ORIENTED_EDGE('',*,*,#63890,.T.); +#64099 = ORIENTED_EDGE('',*,*,#64069,.T.); +#64100 = ORIENTED_EDGE('',*,*,#64101,.F.); +#64101 = EDGE_CURVE('',#64046,#64070,#64102,.T.); +#64102 = LINE('',#64103,#64104); +#64103 = CARTESIAN_POINT('',(-6.535,-11.9,0.)); +#64104 = VECTOR('',#64105,1.); +#64105 = DIRECTION('',(0.,0.,1.)); +#64106 = ORIENTED_EDGE('',*,*,#64045,.F.); +#64107 = PLANE('',#64108); +#64108 = AXIS2_PLACEMENT_3D('',#64109,#64110,#64111); +#64109 = CARTESIAN_POINT('',(-7.435,-11.9,0.)); +#64110 = DIRECTION('',(0.,1.,0.)); +#64111 = DIRECTION('',(1.,0.,0.)); +#64112 = ADVANCED_FACE('',(#64113),#64136,.T.); +#64113 = FACE_BOUND('',#64114,.T.); +#64114 = EDGE_LOOP('',(#64115,#64121,#64129,#64135)); +#64115 = ORIENTED_EDGE('',*,*,#64116,.T.); +#64116 = EDGE_CURVE('',#63942,#64078,#64117,.T.); +#64117 = LINE('',#64118,#64119); +#64118 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#64119 = VECTOR('',#64120,1.); +#64120 = DIRECTION('',(0.,0.,1.)); +#64121 = ORIENTED_EDGE('',*,*,#64122,.T.); +#64122 = EDGE_CURVE('',#64078,#64123,#64125,.T.); +#64123 = VERTEX_POINT('',#64124); +#64124 = CARTESIAN_POINT('',(-6.535,-12.75,0.4)); +#64125 = LINE('',#64126,#64127); +#64126 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#64127 = VECTOR('',#64128,1.); +#64128 = DIRECTION('',(0.,-1.,0.)); +#64129 = ORIENTED_EDGE('',*,*,#64130,.F.); +#64130 = EDGE_CURVE('',#63934,#64123,#64131,.T.); +#64131 = LINE('',#64132,#64133); +#64132 = CARTESIAN_POINT('',(-6.535,-12.75,0.)); +#64133 = VECTOR('',#64134,1.); +#64134 = DIRECTION('',(0.,0.,1.)); +#64135 = ORIENTED_EDGE('',*,*,#63941,.F.); +#64136 = PLANE('',#64137); +#64137 = AXIS2_PLACEMENT_3D('',#64138,#64139,#64140); +#64138 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#64139 = DIRECTION('',(1.,0.,0.)); +#64140 = DIRECTION('',(0.,-1.,0.)); +#64141 = ADVANCED_FACE('',(#64142),#64160,.F.); +#64142 = FACE_BOUND('',#64143,.F.); +#64143 = EDGE_LOOP('',(#64144,#64145,#64153,#64159)); +#64144 = ORIENTED_EDGE('',*,*,#63933,.F.); +#64145 = ORIENTED_EDGE('',*,*,#64146,.T.); +#64146 = EDGE_CURVE('',#63925,#64147,#64149,.T.); +#64147 = VERTEX_POINT('',#64148); +#64148 = CARTESIAN_POINT('',(-6.71,-12.75,0.4)); +#64149 = LINE('',#64150,#64151); +#64150 = CARTESIAN_POINT('',(-6.71,-12.75,0.8)); +#64151 = VECTOR('',#64152,1.); +#64152 = DIRECTION('',(0.,0.,1.)); +#64153 = ORIENTED_EDGE('',*,*,#64154,.T.); +#64154 = EDGE_CURVE('',#64147,#64123,#64155,.T.); +#64155 = LINE('',#64156,#64157); +#64156 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#64157 = VECTOR('',#64158,1.); +#64158 = DIRECTION('',(1.,0.,0.)); +#64159 = ORIENTED_EDGE('',*,*,#64130,.F.); +#64160 = PLANE('',#64161); +#64161 = AXIS2_PLACEMENT_3D('',#64162,#64163,#64164); +#64162 = CARTESIAN_POINT('',(-7.435,-12.75,0.)); +#64163 = DIRECTION('',(0.,1.,0.)); +#64164 = DIRECTION('',(1.,0.,0.)); +#64165 = ADVANCED_FACE('',(#64166),#64186,.F.); +#64166 = FACE_BOUND('',#64167,.F.); +#64167 = EDGE_LOOP('',(#64168,#64169,#64178,#64184,#64185)); +#64168 = ORIENTED_EDGE('',*,*,#64005,.F.); +#64169 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64170 = EDGE_CURVE('',#64171,#63995,#64173,.T.); +#64171 = VERTEX_POINT('',#64172); +#64172 = CARTESIAN_POINT('',(-6.71,-12.75,0.8)); +#64173 = CIRCLE('',#64174,0.275); +#64174 = AXIS2_PLACEMENT_3D('',#64175,#64176,#64177); +#64175 = CARTESIAN_POINT('',(-6.985,-12.75,0.8)); +#64176 = DIRECTION('',(0.,-0.,1.)); +#64177 = DIRECTION('',(0.,1.,0.)); +#64178 = ORIENTED_EDGE('',*,*,#64179,.F.); +#64179 = EDGE_CURVE('',#64147,#64171,#64180,.T.); +#64180 = LINE('',#64181,#64182); +#64181 = CARTESIAN_POINT('',(-6.71,-12.75,0.8)); +#64182 = VECTOR('',#64183,1.); +#64183 = DIRECTION('',(0.,0.,1.)); +#64184 = ORIENTED_EDGE('',*,*,#64146,.F.); +#64185 = ORIENTED_EDGE('',*,*,#63924,.T.); +#64186 = CYLINDRICAL_SURFACE('',#64187,0.275); +#64187 = AXIS2_PLACEMENT_3D('',#64188,#64189,#64190); +#64188 = CARTESIAN_POINT('',(-6.985,-12.75,0.8)); +#64189 = DIRECTION('',(0.,0.,1.)); +#64190 = DIRECTION('',(0.,1.,0.)); +#64191 = ADVANCED_FACE('',(#64192),#64210,.T.); +#64192 = FACE_BOUND('',#64193,.T.); +#64193 = EDGE_LOOP('',(#64194,#64195,#64203,#64209)); +#64194 = ORIENTED_EDGE('',*,*,#63979,.T.); +#64195 = ORIENTED_EDGE('',*,*,#64196,.T.); +#64196 = EDGE_CURVE('',#63972,#64197,#64199,.T.); +#64197 = VERTEX_POINT('',#64198); +#64198 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#64199 = LINE('',#64200,#64201); +#64200 = CARTESIAN_POINT('',(-7.435,-12.3,0.8)); +#64201 = VECTOR('',#64202,1.); +#64202 = DIRECTION('',(1.,0.,0.)); +#64203 = ORIENTED_EDGE('',*,*,#64204,.F.); +#64204 = EDGE_CURVE('',#64078,#64197,#64205,.T.); +#64205 = LINE('',#64206,#64207); +#64206 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#64207 = VECTOR('',#64208,1.); +#64208 = DIRECTION('',(0.,0.,1.)); +#64209 = ORIENTED_EDGE('',*,*,#64085,.F.); +#64210 = PLANE('',#64211); +#64211 = AXIS2_PLACEMENT_3D('',#64212,#64213,#64214); +#64212 = CARTESIAN_POINT('',(-7.435,-12.3,0.4)); +#64213 = DIRECTION('',(0.,1.,0.)); +#64214 = DIRECTION('',(1.,0.,0.)); +#64215 = ADVANCED_FACE('',(#64216),#64237,.T.); +#64216 = FACE_BOUND('',#64217,.T.); +#64217 = EDGE_LOOP('',(#64218,#64219,#64220,#64221,#64222,#64230,#64236) + ); +#64218 = ORIENTED_EDGE('',*,*,#63971,.F.); +#64219 = ORIENTED_EDGE('',*,*,#64029,.T.); +#64220 = ORIENTED_EDGE('',*,*,#63994,.F.); +#64221 = ORIENTED_EDGE('',*,*,#64170,.F.); +#64222 = ORIENTED_EDGE('',*,*,#64223,.T.); +#64223 = EDGE_CURVE('',#64171,#64224,#64226,.T.); +#64224 = VERTEX_POINT('',#64225); +#64225 = CARTESIAN_POINT('',(-6.535,-12.75,0.8)); +#64226 = LINE('',#64227,#64228); +#64227 = CARTESIAN_POINT('',(-7.435,-12.75,0.8)); +#64228 = VECTOR('',#64229,1.); +#64229 = DIRECTION('',(1.,0.,0.)); +#64230 = ORIENTED_EDGE('',*,*,#64231,.F.); +#64231 = EDGE_CURVE('',#64197,#64224,#64232,.T.); +#64232 = LINE('',#64233,#64234); +#64233 = CARTESIAN_POINT('',(-6.535,-12.3,0.8)); +#64234 = VECTOR('',#64235,1.); +#64235 = DIRECTION('',(0.,-1.,0.)); +#64236 = ORIENTED_EDGE('',*,*,#64196,.F.); +#64237 = PLANE('',#64238); +#64238 = AXIS2_PLACEMENT_3D('',#64239,#64240,#64241); +#64239 = CARTESIAN_POINT('',(-6.985,-12.525,0.8)); +#64240 = DIRECTION('',(0.,0.,1.)); +#64241 = DIRECTION('',(0.,1.,0.)); +#64242 = ADVANCED_FACE('',(#64243),#64249,.T.); +#64243 = FACE_BOUND('',#64244,.T.); +#64244 = EDGE_LOOP('',(#64245,#64246,#64247,#64248)); +#64245 = ORIENTED_EDGE('',*,*,#64053,.T.); +#64246 = ORIENTED_EDGE('',*,*,#64101,.T.); +#64247 = ORIENTED_EDGE('',*,*,#64077,.F.); +#64248 = ORIENTED_EDGE('',*,*,#64116,.F.); +#64249 = PLANE('',#64250); +#64250 = AXIS2_PLACEMENT_3D('',#64251,#64252,#64253); +#64251 = CARTESIAN_POINT('',(-6.535,-12.3,0.)); +#64252 = DIRECTION('',(1.,0.,0.)); +#64253 = DIRECTION('',(0.,0.,1.)); +#64254 = ADVANCED_FACE('',(#64255),#64266,.T.); +#64255 = FACE_BOUND('',#64256,.T.); +#64256 = EDGE_LOOP('',(#64257,#64258,#64259,#64265)); +#64257 = ORIENTED_EDGE('',*,*,#64204,.T.); +#64258 = ORIENTED_EDGE('',*,*,#64231,.T.); +#64259 = ORIENTED_EDGE('',*,*,#64260,.F.); +#64260 = EDGE_CURVE('',#64123,#64224,#64261,.T.); +#64261 = LINE('',#64262,#64263); +#64262 = CARTESIAN_POINT('',(-6.535,-12.75,0.4)); +#64263 = VECTOR('',#64264,1.); +#64264 = DIRECTION('',(0.,0.,1.)); +#64265 = ORIENTED_EDGE('',*,*,#64122,.F.); +#64266 = PLANE('',#64267); +#64267 = AXIS2_PLACEMENT_3D('',#64268,#64269,#64270); +#64268 = CARTESIAN_POINT('',(-6.535,-12.3,0.4)); +#64269 = DIRECTION('',(1.,0.,0.)); +#64270 = DIRECTION('',(0.,-1.,0.)); +#64271 = ADVANCED_FACE('',(#64272),#64278,.F.); +#64272 = FACE_BOUND('',#64273,.F.); +#64273 = EDGE_LOOP('',(#64274,#64275,#64276,#64277)); +#64274 = ORIENTED_EDGE('',*,*,#64154,.F.); +#64275 = ORIENTED_EDGE('',*,*,#64179,.T.); +#64276 = ORIENTED_EDGE('',*,*,#64223,.T.); +#64277 = ORIENTED_EDGE('',*,*,#64260,.F.); +#64278 = PLANE('',#64279); +#64279 = AXIS2_PLACEMENT_3D('',#64280,#64281,#64282); +#64280 = CARTESIAN_POINT('',(-7.435,-12.75,0.4)); +#64281 = DIRECTION('',(0.,1.,0.)); +#64282 = DIRECTION('',(1.,0.,0.)); +#64283 = MANIFOLD_SOLID_BREP('',#64284); +#64284 = CLOSED_SHELL('',(#64285,#64325,#64356,#64387,#64437,#64468, + #64501,#64518,#64542,#64573,#64590,#64619,#64643,#64669,#64693, + #64720,#64732,#64749)); +#64285 = ADVANCED_FACE('',(#64286),#64320,.T.); +#64286 = FACE_BOUND('',#64287,.T.); +#64287 = EDGE_LOOP('',(#64288,#64298,#64306,#64314)); +#64288 = ORIENTED_EDGE('',*,*,#64289,.T.); +#64289 = EDGE_CURVE('',#64290,#64292,#64294,.T.); +#64290 = VERTEX_POINT('',#64291); +#64291 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64292 = VERTEX_POINT('',#64293); +#64293 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64294 = LINE('',#64295,#64296); +#64295 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64296 = VECTOR('',#64297,1.); +#64297 = DIRECTION('',(0.,0.,1.)); +#64298 = ORIENTED_EDGE('',*,*,#64299,.T.); +#64299 = EDGE_CURVE('',#64292,#64300,#64302,.T.); +#64300 = VERTEX_POINT('',#64301); +#64301 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64302 = LINE('',#64303,#64304); +#64303 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64304 = VECTOR('',#64305,1.); +#64305 = DIRECTION('',(0.,1.,0.)); +#64306 = ORIENTED_EDGE('',*,*,#64307,.F.); +#64307 = EDGE_CURVE('',#64308,#64300,#64310,.T.); +#64308 = VERTEX_POINT('',#64309); +#64309 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64310 = LINE('',#64311,#64312); +#64311 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64312 = VECTOR('',#64313,1.); +#64313 = DIRECTION('',(0.,0.,1.)); +#64314 = ORIENTED_EDGE('',*,*,#64315,.F.); +#64315 = EDGE_CURVE('',#64290,#64308,#64316,.T.); +#64316 = LINE('',#64317,#64318); +#64317 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64318 = VECTOR('',#64319,1.); +#64319 = DIRECTION('',(0.,1.,0.)); +#64320 = PLANE('',#64321); +#64321 = AXIS2_PLACEMENT_3D('',#64322,#64323,#64324); +#64322 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64323 = DIRECTION('',(-1.,0.,0.)); +#64324 = DIRECTION('',(0.,1.,0.)); +#64325 = ADVANCED_FACE('',(#64326),#64351,.F.); +#64326 = FACE_BOUND('',#64327,.F.); +#64327 = EDGE_LOOP('',(#64328,#64336,#64337,#64345)); +#64328 = ORIENTED_EDGE('',*,*,#64329,.F.); +#64329 = EDGE_CURVE('',#64290,#64330,#64332,.T.); +#64330 = VERTEX_POINT('',#64331); +#64331 = CARTESIAN_POINT('',(-5.99,-12.75,0.)); +#64332 = LINE('',#64333,#64334); +#64333 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64334 = VECTOR('',#64335,1.); +#64335 = DIRECTION('',(1.,0.,0.)); +#64336 = ORIENTED_EDGE('',*,*,#64289,.T.); +#64337 = ORIENTED_EDGE('',*,*,#64338,.T.); +#64338 = EDGE_CURVE('',#64292,#64339,#64341,.T.); +#64339 = VERTEX_POINT('',#64340); +#64340 = CARTESIAN_POINT('',(-5.99,-12.75,0.4)); +#64341 = LINE('',#64342,#64343); +#64342 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64343 = VECTOR('',#64344,1.); +#64344 = DIRECTION('',(1.,0.,0.)); +#64345 = ORIENTED_EDGE('',*,*,#64346,.F.); +#64346 = EDGE_CURVE('',#64330,#64339,#64347,.T.); +#64347 = LINE('',#64348,#64349); +#64348 = CARTESIAN_POINT('',(-5.99,-12.75,0.8)); +#64349 = VECTOR('',#64350,1.); +#64350 = DIRECTION('',(0.,0.,1.)); +#64351 = PLANE('',#64352); +#64352 = AXIS2_PLACEMENT_3D('',#64353,#64354,#64355); +#64353 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64354 = DIRECTION('',(0.,1.,0.)); +#64355 = DIRECTION('',(1.,0.,0.)); +#64356 = ADVANCED_FACE('',(#64357),#64382,.F.); +#64357 = FACE_BOUND('',#64358,.F.); +#64358 = EDGE_LOOP('',(#64359,#64367,#64375,#64381)); +#64359 = ORIENTED_EDGE('',*,*,#64360,.T.); +#64360 = EDGE_CURVE('',#64308,#64361,#64363,.T.); +#64361 = VERTEX_POINT('',#64362); +#64362 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#64363 = LINE('',#64364,#64365); +#64364 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64365 = VECTOR('',#64366,1.); +#64366 = DIRECTION('',(0.,1.,0.)); +#64367 = ORIENTED_EDGE('',*,*,#64368,.T.); +#64368 = EDGE_CURVE('',#64361,#64369,#64371,.T.); +#64369 = VERTEX_POINT('',#64370); +#64370 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#64371 = LINE('',#64372,#64373); +#64372 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#64373 = VECTOR('',#64374,1.); +#64374 = DIRECTION('',(0.,0.,1.)); +#64375 = ORIENTED_EDGE('',*,*,#64376,.F.); +#64376 = EDGE_CURVE('',#64300,#64369,#64377,.T.); +#64377 = LINE('',#64378,#64379); +#64378 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64379 = VECTOR('',#64380,1.); +#64380 = DIRECTION('',(0.,1.,0.)); +#64381 = ORIENTED_EDGE('',*,*,#64307,.F.); +#64382 = PLANE('',#64383); +#64383 = AXIS2_PLACEMENT_3D('',#64384,#64385,#64386); +#64384 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64385 = DIRECTION('',(1.,0.,0.)); +#64386 = DIRECTION('',(0.,0.,1.)); +#64387 = ADVANCED_FACE('',(#64388),#64432,.F.); +#64388 = FACE_BOUND('',#64389,.F.); +#64389 = EDGE_LOOP('',(#64390,#64391,#64392,#64401,#64410,#64418,#64426) + ); +#64390 = ORIENTED_EDGE('',*,*,#64315,.F.); +#64391 = ORIENTED_EDGE('',*,*,#64329,.T.); +#64392 = ORIENTED_EDGE('',*,*,#64393,.F.); +#64393 = EDGE_CURVE('',#64394,#64330,#64396,.T.); +#64394 = VERTEX_POINT('',#64395); +#64395 = CARTESIAN_POINT('',(-5.715,-12.475,0.)); +#64396 = CIRCLE('',#64397,0.275); +#64397 = AXIS2_PLACEMENT_3D('',#64398,#64399,#64400); +#64398 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#64399 = DIRECTION('',(0.,-0.,1.)); +#64400 = DIRECTION('',(0.,1.,0.)); +#64401 = ORIENTED_EDGE('',*,*,#64402,.F.); +#64402 = EDGE_CURVE('',#64403,#64394,#64405,.T.); +#64403 = VERTEX_POINT('',#64404); +#64404 = CARTESIAN_POINT('',(-5.44,-12.75,0.)); +#64405 = CIRCLE('',#64406,0.275); +#64406 = AXIS2_PLACEMENT_3D('',#64407,#64408,#64409); +#64407 = CARTESIAN_POINT('',(-5.715,-12.75,0.)); +#64408 = DIRECTION('',(0.,-0.,1.)); +#64409 = DIRECTION('',(0.,1.,0.)); +#64410 = ORIENTED_EDGE('',*,*,#64411,.T.); +#64411 = EDGE_CURVE('',#64403,#64412,#64414,.T.); +#64412 = VERTEX_POINT('',#64413); +#64413 = CARTESIAN_POINT('',(-5.265,-12.75,0.)); +#64414 = LINE('',#64415,#64416); +#64415 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64416 = VECTOR('',#64417,1.); +#64417 = DIRECTION('',(1.,0.,0.)); +#64418 = ORIENTED_EDGE('',*,*,#64419,.F.); +#64419 = EDGE_CURVE('',#64420,#64412,#64422,.T.); +#64420 = VERTEX_POINT('',#64421); +#64421 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64422 = LINE('',#64423,#64424); +#64423 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64424 = VECTOR('',#64425,1.); +#64425 = DIRECTION('',(0.,-1.,0.)); +#64426 = ORIENTED_EDGE('',*,*,#64427,.F.); +#64427 = EDGE_CURVE('',#64308,#64420,#64428,.T.); +#64428 = LINE('',#64429,#64430); +#64429 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64430 = VECTOR('',#64431,1.); +#64431 = DIRECTION('',(1.,0.,0.)); +#64432 = PLANE('',#64433); +#64433 = AXIS2_PLACEMENT_3D('',#64434,#64435,#64436); +#64434 = CARTESIAN_POINT('',(-5.715,-12.525,0.)); +#64435 = DIRECTION('',(0.,0.,1.)); +#64436 = DIRECTION('',(0.,1.,0.)); +#64437 = ADVANCED_FACE('',(#64438),#64463,.T.); +#64438 = FACE_BOUND('',#64439,.T.); +#64439 = EDGE_LOOP('',(#64440,#64448,#64456,#64462)); +#64440 = ORIENTED_EDGE('',*,*,#64441,.T.); +#64441 = EDGE_CURVE('',#64292,#64442,#64444,.T.); +#64442 = VERTEX_POINT('',#64443); +#64443 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#64444 = LINE('',#64445,#64446); +#64445 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64446 = VECTOR('',#64447,1.); +#64447 = DIRECTION('',(0.,0.,1.)); +#64448 = ORIENTED_EDGE('',*,*,#64449,.T.); +#64449 = EDGE_CURVE('',#64442,#64450,#64452,.T.); +#64450 = VERTEX_POINT('',#64451); +#64451 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#64452 = LINE('',#64453,#64454); +#64453 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#64454 = VECTOR('',#64455,1.); +#64455 = DIRECTION('',(0.,1.,0.)); +#64456 = ORIENTED_EDGE('',*,*,#64457,.F.); +#64457 = EDGE_CURVE('',#64300,#64450,#64458,.T.); +#64458 = LINE('',#64459,#64460); +#64459 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64460 = VECTOR('',#64461,1.); +#64461 = DIRECTION('',(0.,0.,1.)); +#64462 = ORIENTED_EDGE('',*,*,#64299,.F.); +#64463 = PLANE('',#64464); +#64464 = AXIS2_PLACEMENT_3D('',#64465,#64466,#64467); +#64465 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64466 = DIRECTION('',(-1.,0.,0.)); +#64467 = DIRECTION('',(0.,1.,0.)); +#64468 = ADVANCED_FACE('',(#64469),#64496,.F.); +#64469 = FACE_BOUND('',#64470,.F.); +#64470 = EDGE_LOOP('',(#64471,#64482,#64488,#64489,#64490)); +#64471 = ORIENTED_EDGE('',*,*,#64472,.F.); +#64472 = EDGE_CURVE('',#64473,#64475,#64477,.T.); +#64473 = VERTEX_POINT('',#64474); +#64474 = CARTESIAN_POINT('',(-5.715,-12.475,0.8)); +#64475 = VERTEX_POINT('',#64476); +#64476 = CARTESIAN_POINT('',(-5.99,-12.75,0.8)); +#64477 = CIRCLE('',#64478,0.275); +#64478 = AXIS2_PLACEMENT_3D('',#64479,#64480,#64481); +#64479 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#64480 = DIRECTION('',(0.,-0.,1.)); +#64481 = DIRECTION('',(0.,1.,0.)); +#64482 = ORIENTED_EDGE('',*,*,#64483,.T.); +#64483 = EDGE_CURVE('',#64473,#64394,#64484,.T.); +#64484 = LINE('',#64485,#64486); +#64485 = CARTESIAN_POINT('',(-5.715,-12.475,0.8)); +#64486 = VECTOR('',#64487,1.); +#64487 = DIRECTION('',(0.,-0.,-1.)); +#64488 = ORIENTED_EDGE('',*,*,#64393,.T.); +#64489 = ORIENTED_EDGE('',*,*,#64346,.T.); +#64490 = ORIENTED_EDGE('',*,*,#64491,.T.); +#64491 = EDGE_CURVE('',#64339,#64475,#64492,.T.); +#64492 = LINE('',#64493,#64494); +#64493 = CARTESIAN_POINT('',(-5.99,-12.75,0.8)); +#64494 = VECTOR('',#64495,1.); +#64495 = DIRECTION('',(0.,0.,1.)); +#64496 = CYLINDRICAL_SURFACE('',#64497,0.275); +#64497 = AXIS2_PLACEMENT_3D('',#64498,#64499,#64500); +#64498 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#64499 = DIRECTION('',(0.,0.,1.)); +#64500 = DIRECTION('',(0.,1.,0.)); +#64501 = ADVANCED_FACE('',(#64502),#64513,.F.); +#64502 = FACE_BOUND('',#64503,.F.); +#64503 = EDGE_LOOP('',(#64504,#64505,#64506,#64512)); +#64504 = ORIENTED_EDGE('',*,*,#64338,.F.); +#64505 = ORIENTED_EDGE('',*,*,#64441,.T.); +#64506 = ORIENTED_EDGE('',*,*,#64507,.T.); +#64507 = EDGE_CURVE('',#64442,#64475,#64508,.T.); +#64508 = LINE('',#64509,#64510); +#64509 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#64510 = VECTOR('',#64511,1.); +#64511 = DIRECTION('',(1.,0.,0.)); +#64512 = ORIENTED_EDGE('',*,*,#64491,.F.); +#64513 = PLANE('',#64514); +#64514 = AXIS2_PLACEMENT_3D('',#64515,#64516,#64517); +#64515 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64516 = DIRECTION('',(0.,1.,0.)); +#64517 = DIRECTION('',(1.,0.,0.)); +#64518 = ADVANCED_FACE('',(#64519),#64537,.T.); +#64519 = FACE_BOUND('',#64520,.T.); +#64520 = EDGE_LOOP('',(#64521,#64522,#64530,#64536)); +#64521 = ORIENTED_EDGE('',*,*,#64360,.T.); +#64522 = ORIENTED_EDGE('',*,*,#64523,.T.); +#64523 = EDGE_CURVE('',#64361,#64524,#64526,.T.); +#64524 = VERTEX_POINT('',#64525); +#64525 = CARTESIAN_POINT('',(-5.265,-11.9,0.)); +#64526 = LINE('',#64527,#64528); +#64527 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#64528 = VECTOR('',#64529,1.); +#64529 = DIRECTION('',(1.,0.,0.)); +#64530 = ORIENTED_EDGE('',*,*,#64531,.F.); +#64531 = EDGE_CURVE('',#64420,#64524,#64532,.T.); +#64532 = LINE('',#64533,#64534); +#64533 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64534 = VECTOR('',#64535,1.); +#64535 = DIRECTION('',(0.,1.,0.)); +#64536 = ORIENTED_EDGE('',*,*,#64427,.F.); +#64537 = PLANE('',#64538); +#64538 = AXIS2_PLACEMENT_3D('',#64539,#64540,#64541); +#64539 = CARTESIAN_POINT('',(-6.165,-12.3,0.)); +#64540 = DIRECTION('',(0.,0.,-1.)); +#64541 = DIRECTION('',(1.,0.,0.)); +#64542 = ADVANCED_FACE('',(#64543),#64568,.F.); +#64543 = FACE_BOUND('',#64544,.F.); +#64544 = EDGE_LOOP('',(#64545,#64546,#64554,#64562)); +#64545 = ORIENTED_EDGE('',*,*,#64376,.T.); +#64546 = ORIENTED_EDGE('',*,*,#64547,.T.); +#64547 = EDGE_CURVE('',#64369,#64548,#64550,.T.); +#64548 = VERTEX_POINT('',#64549); +#64549 = CARTESIAN_POINT('',(-5.265,-11.9,0.4)); +#64550 = LINE('',#64551,#64552); +#64551 = CARTESIAN_POINT('',(-6.165,-11.9,0.4)); +#64552 = VECTOR('',#64553,1.); +#64553 = DIRECTION('',(1.,0.,0.)); +#64554 = ORIENTED_EDGE('',*,*,#64555,.F.); +#64555 = EDGE_CURVE('',#64556,#64548,#64558,.T.); +#64556 = VERTEX_POINT('',#64557); +#64557 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#64558 = LINE('',#64559,#64560); +#64559 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#64560 = VECTOR('',#64561,1.); +#64561 = DIRECTION('',(0.,1.,0.)); +#64562 = ORIENTED_EDGE('',*,*,#64563,.F.); +#64563 = EDGE_CURVE('',#64300,#64556,#64564,.T.); +#64564 = LINE('',#64565,#64566); +#64565 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64566 = VECTOR('',#64567,1.); +#64567 = DIRECTION('',(1.,0.,0.)); +#64568 = PLANE('',#64569); +#64569 = AXIS2_PLACEMENT_3D('',#64570,#64571,#64572); +#64570 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64571 = DIRECTION('',(0.,0.,-1.)); +#64572 = DIRECTION('',(1.,0.,0.)); +#64573 = ADVANCED_FACE('',(#64574),#64585,.T.); +#64574 = FACE_BOUND('',#64575,.T.); +#64575 = EDGE_LOOP('',(#64576,#64577,#64578,#64584)); +#64576 = ORIENTED_EDGE('',*,*,#64368,.T.); +#64577 = ORIENTED_EDGE('',*,*,#64547,.T.); +#64578 = ORIENTED_EDGE('',*,*,#64579,.F.); +#64579 = EDGE_CURVE('',#64524,#64548,#64580,.T.); +#64580 = LINE('',#64581,#64582); +#64581 = CARTESIAN_POINT('',(-5.265,-11.9,0.)); +#64582 = VECTOR('',#64583,1.); +#64583 = DIRECTION('',(0.,0.,1.)); +#64584 = ORIENTED_EDGE('',*,*,#64523,.F.); +#64585 = PLANE('',#64586); +#64586 = AXIS2_PLACEMENT_3D('',#64587,#64588,#64589); +#64587 = CARTESIAN_POINT('',(-6.165,-11.9,0.)); +#64588 = DIRECTION('',(0.,1.,0.)); +#64589 = DIRECTION('',(1.,0.,0.)); +#64590 = ADVANCED_FACE('',(#64591),#64614,.T.); +#64591 = FACE_BOUND('',#64592,.T.); +#64592 = EDGE_LOOP('',(#64593,#64599,#64607,#64613)); +#64593 = ORIENTED_EDGE('',*,*,#64594,.T.); +#64594 = EDGE_CURVE('',#64420,#64556,#64595,.T.); +#64595 = LINE('',#64596,#64597); +#64596 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64597 = VECTOR('',#64598,1.); +#64598 = DIRECTION('',(0.,0.,1.)); +#64599 = ORIENTED_EDGE('',*,*,#64600,.T.); +#64600 = EDGE_CURVE('',#64556,#64601,#64603,.T.); +#64601 = VERTEX_POINT('',#64602); +#64602 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#64603 = LINE('',#64604,#64605); +#64604 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#64605 = VECTOR('',#64606,1.); +#64606 = DIRECTION('',(0.,-1.,0.)); +#64607 = ORIENTED_EDGE('',*,*,#64608,.F.); +#64608 = EDGE_CURVE('',#64412,#64601,#64609,.T.); +#64609 = LINE('',#64610,#64611); +#64610 = CARTESIAN_POINT('',(-5.265,-12.75,0.)); +#64611 = VECTOR('',#64612,1.); +#64612 = DIRECTION('',(0.,0.,1.)); +#64613 = ORIENTED_EDGE('',*,*,#64419,.F.); +#64614 = PLANE('',#64615); +#64615 = AXIS2_PLACEMENT_3D('',#64616,#64617,#64618); +#64616 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64617 = DIRECTION('',(1.,0.,0.)); +#64618 = DIRECTION('',(0.,-1.,0.)); +#64619 = ADVANCED_FACE('',(#64620),#64638,.F.); +#64620 = FACE_BOUND('',#64621,.F.); +#64621 = EDGE_LOOP('',(#64622,#64623,#64631,#64637)); +#64622 = ORIENTED_EDGE('',*,*,#64411,.F.); +#64623 = ORIENTED_EDGE('',*,*,#64624,.T.); +#64624 = EDGE_CURVE('',#64403,#64625,#64627,.T.); +#64625 = VERTEX_POINT('',#64626); +#64626 = CARTESIAN_POINT('',(-5.44,-12.75,0.4)); +#64627 = LINE('',#64628,#64629); +#64628 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#64629 = VECTOR('',#64630,1.); +#64630 = DIRECTION('',(0.,0.,1.)); +#64631 = ORIENTED_EDGE('',*,*,#64632,.T.); +#64632 = EDGE_CURVE('',#64625,#64601,#64633,.T.); +#64633 = LINE('',#64634,#64635); +#64634 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64635 = VECTOR('',#64636,1.); +#64636 = DIRECTION('',(1.,0.,0.)); +#64637 = ORIENTED_EDGE('',*,*,#64608,.F.); +#64638 = PLANE('',#64639); +#64639 = AXIS2_PLACEMENT_3D('',#64640,#64641,#64642); +#64640 = CARTESIAN_POINT('',(-6.165,-12.75,0.)); +#64641 = DIRECTION('',(0.,1.,0.)); +#64642 = DIRECTION('',(1.,0.,0.)); +#64643 = ADVANCED_FACE('',(#64644),#64664,.F.); +#64644 = FACE_BOUND('',#64645,.F.); +#64645 = EDGE_LOOP('',(#64646,#64647,#64656,#64662,#64663)); +#64646 = ORIENTED_EDGE('',*,*,#64483,.F.); +#64647 = ORIENTED_EDGE('',*,*,#64648,.F.); +#64648 = EDGE_CURVE('',#64649,#64473,#64651,.T.); +#64649 = VERTEX_POINT('',#64650); +#64650 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#64651 = CIRCLE('',#64652,0.275); +#64652 = AXIS2_PLACEMENT_3D('',#64653,#64654,#64655); +#64653 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#64654 = DIRECTION('',(0.,-0.,1.)); +#64655 = DIRECTION('',(0.,1.,0.)); +#64656 = ORIENTED_EDGE('',*,*,#64657,.F.); +#64657 = EDGE_CURVE('',#64625,#64649,#64658,.T.); +#64658 = LINE('',#64659,#64660); +#64659 = CARTESIAN_POINT('',(-5.44,-12.75,0.8)); +#64660 = VECTOR('',#64661,1.); +#64661 = DIRECTION('',(0.,0.,1.)); +#64662 = ORIENTED_EDGE('',*,*,#64624,.F.); +#64663 = ORIENTED_EDGE('',*,*,#64402,.T.); +#64664 = CYLINDRICAL_SURFACE('',#64665,0.275); +#64665 = AXIS2_PLACEMENT_3D('',#64666,#64667,#64668); +#64666 = CARTESIAN_POINT('',(-5.715,-12.75,0.8)); +#64667 = DIRECTION('',(0.,0.,1.)); +#64668 = DIRECTION('',(0.,1.,0.)); +#64669 = ADVANCED_FACE('',(#64670),#64688,.T.); +#64670 = FACE_BOUND('',#64671,.T.); +#64671 = EDGE_LOOP('',(#64672,#64673,#64681,#64687)); +#64672 = ORIENTED_EDGE('',*,*,#64457,.T.); +#64673 = ORIENTED_EDGE('',*,*,#64674,.T.); +#64674 = EDGE_CURVE('',#64450,#64675,#64677,.T.); +#64675 = VERTEX_POINT('',#64676); +#64676 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#64677 = LINE('',#64678,#64679); +#64678 = CARTESIAN_POINT('',(-6.165,-12.3,0.8)); +#64679 = VECTOR('',#64680,1.); +#64680 = DIRECTION('',(1.,0.,0.)); +#64681 = ORIENTED_EDGE('',*,*,#64682,.F.); +#64682 = EDGE_CURVE('',#64556,#64675,#64683,.T.); +#64683 = LINE('',#64684,#64685); +#64684 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#64685 = VECTOR('',#64686,1.); +#64686 = DIRECTION('',(0.,0.,1.)); +#64687 = ORIENTED_EDGE('',*,*,#64563,.F.); +#64688 = PLANE('',#64689); +#64689 = AXIS2_PLACEMENT_3D('',#64690,#64691,#64692); +#64690 = CARTESIAN_POINT('',(-6.165,-12.3,0.4)); +#64691 = DIRECTION('',(0.,1.,0.)); +#64692 = DIRECTION('',(1.,0.,0.)); +#64693 = ADVANCED_FACE('',(#64694),#64715,.T.); +#64694 = FACE_BOUND('',#64695,.T.); +#64695 = EDGE_LOOP('',(#64696,#64697,#64698,#64699,#64700,#64708,#64714) + ); +#64696 = ORIENTED_EDGE('',*,*,#64449,.F.); +#64697 = ORIENTED_EDGE('',*,*,#64507,.T.); +#64698 = ORIENTED_EDGE('',*,*,#64472,.F.); +#64699 = ORIENTED_EDGE('',*,*,#64648,.F.); +#64700 = ORIENTED_EDGE('',*,*,#64701,.T.); +#64701 = EDGE_CURVE('',#64649,#64702,#64704,.T.); +#64702 = VERTEX_POINT('',#64703); +#64703 = CARTESIAN_POINT('',(-5.265,-12.75,0.8)); +#64704 = LINE('',#64705,#64706); +#64705 = CARTESIAN_POINT('',(-6.165,-12.75,0.8)); +#64706 = VECTOR('',#64707,1.); +#64707 = DIRECTION('',(1.,0.,0.)); +#64708 = ORIENTED_EDGE('',*,*,#64709,.F.); +#64709 = EDGE_CURVE('',#64675,#64702,#64710,.T.); +#64710 = LINE('',#64711,#64712); +#64711 = CARTESIAN_POINT('',(-5.265,-12.3,0.8)); +#64712 = VECTOR('',#64713,1.); +#64713 = DIRECTION('',(0.,-1.,0.)); +#64714 = ORIENTED_EDGE('',*,*,#64674,.F.); +#64715 = PLANE('',#64716); +#64716 = AXIS2_PLACEMENT_3D('',#64717,#64718,#64719); +#64717 = CARTESIAN_POINT('',(-5.715,-12.525,0.8)); +#64718 = DIRECTION('',(0.,0.,1.)); +#64719 = DIRECTION('',(0.,1.,0.)); +#64720 = ADVANCED_FACE('',(#64721),#64727,.T.); +#64721 = FACE_BOUND('',#64722,.T.); +#64722 = EDGE_LOOP('',(#64723,#64724,#64725,#64726)); +#64723 = ORIENTED_EDGE('',*,*,#64531,.T.); +#64724 = ORIENTED_EDGE('',*,*,#64579,.T.); +#64725 = ORIENTED_EDGE('',*,*,#64555,.F.); +#64726 = ORIENTED_EDGE('',*,*,#64594,.F.); +#64727 = PLANE('',#64728); +#64728 = AXIS2_PLACEMENT_3D('',#64729,#64730,#64731); +#64729 = CARTESIAN_POINT('',(-5.265,-12.3,0.)); +#64730 = DIRECTION('',(1.,0.,0.)); +#64731 = DIRECTION('',(0.,0.,1.)); +#64732 = ADVANCED_FACE('',(#64733),#64744,.T.); +#64733 = FACE_BOUND('',#64734,.T.); +#64734 = EDGE_LOOP('',(#64735,#64736,#64737,#64743)); +#64735 = ORIENTED_EDGE('',*,*,#64682,.T.); +#64736 = ORIENTED_EDGE('',*,*,#64709,.T.); +#64737 = ORIENTED_EDGE('',*,*,#64738,.F.); +#64738 = EDGE_CURVE('',#64601,#64702,#64739,.T.); +#64739 = LINE('',#64740,#64741); +#64740 = CARTESIAN_POINT('',(-5.265,-12.75,0.4)); +#64741 = VECTOR('',#64742,1.); +#64742 = DIRECTION('',(0.,0.,1.)); +#64743 = ORIENTED_EDGE('',*,*,#64600,.F.); +#64744 = PLANE('',#64745); +#64745 = AXIS2_PLACEMENT_3D('',#64746,#64747,#64748); +#64746 = CARTESIAN_POINT('',(-5.265,-12.3,0.4)); +#64747 = DIRECTION('',(1.,0.,0.)); +#64748 = DIRECTION('',(0.,-1.,0.)); +#64749 = ADVANCED_FACE('',(#64750),#64756,.F.); +#64750 = FACE_BOUND('',#64751,.F.); +#64751 = EDGE_LOOP('',(#64752,#64753,#64754,#64755)); +#64752 = ORIENTED_EDGE('',*,*,#64632,.F.); +#64753 = ORIENTED_EDGE('',*,*,#64657,.T.); +#64754 = ORIENTED_EDGE('',*,*,#64701,.T.); +#64755 = ORIENTED_EDGE('',*,*,#64738,.F.); +#64756 = PLANE('',#64757); +#64757 = AXIS2_PLACEMENT_3D('',#64758,#64759,#64760); +#64758 = CARTESIAN_POINT('',(-6.165,-12.75,0.4)); +#64759 = DIRECTION('',(0.,1.,0.)); +#64760 = DIRECTION('',(1.,0.,0.)); +#64761 = MANIFOLD_SOLID_BREP('',#64762); +#64762 = CLOSED_SHELL('',(#64763,#64803,#64834,#64865,#64915,#64946, + #64979,#64996,#65020,#65051,#65068,#65097,#65121,#65147,#65171, + #65198,#65210,#65227)); +#64763 = ADVANCED_FACE('',(#64764),#64798,.T.); +#64764 = FACE_BOUND('',#64765,.T.); +#64765 = EDGE_LOOP('',(#64766,#64776,#64784,#64792)); +#64766 = ORIENTED_EDGE('',*,*,#64767,.T.); +#64767 = EDGE_CURVE('',#64768,#64770,#64772,.T.); +#64768 = VERTEX_POINT('',#64769); +#64769 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64770 = VERTEX_POINT('',#64771); +#64771 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64772 = LINE('',#64773,#64774); +#64773 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64774 = VECTOR('',#64775,1.); +#64775 = DIRECTION('',(0.,0.,1.)); +#64776 = ORIENTED_EDGE('',*,*,#64777,.T.); +#64777 = EDGE_CURVE('',#64770,#64778,#64780,.T.); +#64778 = VERTEX_POINT('',#64779); +#64779 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#64780 = LINE('',#64781,#64782); +#64781 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64782 = VECTOR('',#64783,1.); +#64783 = DIRECTION('',(0.,1.,0.)); +#64784 = ORIENTED_EDGE('',*,*,#64785,.F.); +#64785 = EDGE_CURVE('',#64786,#64778,#64788,.T.); +#64786 = VERTEX_POINT('',#64787); +#64787 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#64788 = LINE('',#64789,#64790); +#64789 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#64790 = VECTOR('',#64791,1.); +#64791 = DIRECTION('',(0.,0.,1.)); +#64792 = ORIENTED_EDGE('',*,*,#64793,.F.); +#64793 = EDGE_CURVE('',#64768,#64786,#64794,.T.); +#64794 = LINE('',#64795,#64796); +#64795 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64796 = VECTOR('',#64797,1.); +#64797 = DIRECTION('',(0.,1.,0.)); +#64798 = PLANE('',#64799); +#64799 = AXIS2_PLACEMENT_3D('',#64800,#64801,#64802); +#64800 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64801 = DIRECTION('',(-1.,0.,0.)); +#64802 = DIRECTION('',(0.,1.,0.)); +#64803 = ADVANCED_FACE('',(#64804),#64829,.F.); +#64804 = FACE_BOUND('',#64805,.F.); +#64805 = EDGE_LOOP('',(#64806,#64814,#64815,#64823)); +#64806 = ORIENTED_EDGE('',*,*,#64807,.F.); +#64807 = EDGE_CURVE('',#64768,#64808,#64810,.T.); +#64808 = VERTEX_POINT('',#64809); +#64809 = CARTESIAN_POINT('',(-4.72,-12.75,0.)); +#64810 = LINE('',#64811,#64812); +#64811 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64812 = VECTOR('',#64813,1.); +#64813 = DIRECTION('',(1.,0.,0.)); +#64814 = ORIENTED_EDGE('',*,*,#64767,.T.); +#64815 = ORIENTED_EDGE('',*,*,#64816,.T.); +#64816 = EDGE_CURVE('',#64770,#64817,#64819,.T.); +#64817 = VERTEX_POINT('',#64818); +#64818 = CARTESIAN_POINT('',(-4.72,-12.75,0.4)); +#64819 = LINE('',#64820,#64821); +#64820 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64821 = VECTOR('',#64822,1.); +#64822 = DIRECTION('',(1.,0.,0.)); +#64823 = ORIENTED_EDGE('',*,*,#64824,.F.); +#64824 = EDGE_CURVE('',#64808,#64817,#64825,.T.); +#64825 = LINE('',#64826,#64827); +#64826 = CARTESIAN_POINT('',(-4.72,-12.75,0.8)); +#64827 = VECTOR('',#64828,1.); +#64828 = DIRECTION('',(0.,0.,1.)); +#64829 = PLANE('',#64830); +#64830 = AXIS2_PLACEMENT_3D('',#64831,#64832,#64833); +#64831 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64832 = DIRECTION('',(0.,1.,0.)); +#64833 = DIRECTION('',(1.,0.,0.)); +#64834 = ADVANCED_FACE('',(#64835),#64860,.F.); +#64835 = FACE_BOUND('',#64836,.F.); +#64836 = EDGE_LOOP('',(#64837,#64845,#64853,#64859)); +#64837 = ORIENTED_EDGE('',*,*,#64838,.T.); +#64838 = EDGE_CURVE('',#64786,#64839,#64841,.T.); +#64839 = VERTEX_POINT('',#64840); +#64840 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#64841 = LINE('',#64842,#64843); +#64842 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#64843 = VECTOR('',#64844,1.); +#64844 = DIRECTION('',(0.,1.,0.)); +#64845 = ORIENTED_EDGE('',*,*,#64846,.T.); +#64846 = EDGE_CURVE('',#64839,#64847,#64849,.T.); +#64847 = VERTEX_POINT('',#64848); +#64848 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#64849 = LINE('',#64850,#64851); +#64850 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#64851 = VECTOR('',#64852,1.); +#64852 = DIRECTION('',(0.,0.,1.)); +#64853 = ORIENTED_EDGE('',*,*,#64854,.F.); +#64854 = EDGE_CURVE('',#64778,#64847,#64855,.T.); +#64855 = LINE('',#64856,#64857); +#64856 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#64857 = VECTOR('',#64858,1.); +#64858 = DIRECTION('',(0.,1.,0.)); +#64859 = ORIENTED_EDGE('',*,*,#64785,.F.); +#64860 = PLANE('',#64861); +#64861 = AXIS2_PLACEMENT_3D('',#64862,#64863,#64864); +#64862 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#64863 = DIRECTION('',(1.,0.,0.)); +#64864 = DIRECTION('',(0.,0.,1.)); +#64865 = ADVANCED_FACE('',(#64866),#64910,.F.); +#64866 = FACE_BOUND('',#64867,.F.); +#64867 = EDGE_LOOP('',(#64868,#64869,#64870,#64879,#64888,#64896,#64904) + ); +#64868 = ORIENTED_EDGE('',*,*,#64793,.F.); +#64869 = ORIENTED_EDGE('',*,*,#64807,.T.); +#64870 = ORIENTED_EDGE('',*,*,#64871,.F.); +#64871 = EDGE_CURVE('',#64872,#64808,#64874,.T.); +#64872 = VERTEX_POINT('',#64873); +#64873 = CARTESIAN_POINT('',(-4.445,-12.475,0.)); +#64874 = CIRCLE('',#64875,0.275); +#64875 = AXIS2_PLACEMENT_3D('',#64876,#64877,#64878); +#64876 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#64877 = DIRECTION('',(0.,-0.,1.)); +#64878 = DIRECTION('',(0.,1.,0.)); +#64879 = ORIENTED_EDGE('',*,*,#64880,.F.); +#64880 = EDGE_CURVE('',#64881,#64872,#64883,.T.); +#64881 = VERTEX_POINT('',#64882); +#64882 = CARTESIAN_POINT('',(-4.17,-12.75,0.)); +#64883 = CIRCLE('',#64884,0.275); +#64884 = AXIS2_PLACEMENT_3D('',#64885,#64886,#64887); +#64885 = CARTESIAN_POINT('',(-4.445,-12.75,0.)); +#64886 = DIRECTION('',(0.,-0.,1.)); +#64887 = DIRECTION('',(0.,1.,0.)); +#64888 = ORIENTED_EDGE('',*,*,#64889,.T.); +#64889 = EDGE_CURVE('',#64881,#64890,#64892,.T.); +#64890 = VERTEX_POINT('',#64891); +#64891 = CARTESIAN_POINT('',(-3.995,-12.75,0.)); +#64892 = LINE('',#64893,#64894); +#64893 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#64894 = VECTOR('',#64895,1.); +#64895 = DIRECTION('',(1.,0.,0.)); +#64896 = ORIENTED_EDGE('',*,*,#64897,.F.); +#64897 = EDGE_CURVE('',#64898,#64890,#64900,.T.); +#64898 = VERTEX_POINT('',#64899); +#64899 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#64900 = LINE('',#64901,#64902); +#64901 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#64902 = VECTOR('',#64903,1.); +#64903 = DIRECTION('',(0.,-1.,0.)); +#64904 = ORIENTED_EDGE('',*,*,#64905,.F.); +#64905 = EDGE_CURVE('',#64786,#64898,#64906,.T.); +#64906 = LINE('',#64907,#64908); +#64907 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#64908 = VECTOR('',#64909,1.); +#64909 = DIRECTION('',(1.,0.,0.)); +#64910 = PLANE('',#64911); +#64911 = AXIS2_PLACEMENT_3D('',#64912,#64913,#64914); +#64912 = CARTESIAN_POINT('',(-4.445,-12.525,0.)); +#64913 = DIRECTION('',(0.,0.,1.)); +#64914 = DIRECTION('',(0.,1.,0.)); +#64915 = ADVANCED_FACE('',(#64916),#64941,.T.); +#64916 = FACE_BOUND('',#64917,.T.); +#64917 = EDGE_LOOP('',(#64918,#64926,#64934,#64940)); +#64918 = ORIENTED_EDGE('',*,*,#64919,.T.); +#64919 = EDGE_CURVE('',#64770,#64920,#64922,.T.); +#64920 = VERTEX_POINT('',#64921); +#64921 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#64922 = LINE('',#64923,#64924); +#64923 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64924 = VECTOR('',#64925,1.); +#64925 = DIRECTION('',(0.,0.,1.)); +#64926 = ORIENTED_EDGE('',*,*,#64927,.T.); +#64927 = EDGE_CURVE('',#64920,#64928,#64930,.T.); +#64928 = VERTEX_POINT('',#64929); +#64929 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#64930 = LINE('',#64931,#64932); +#64931 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#64932 = VECTOR('',#64933,1.); +#64933 = DIRECTION('',(0.,1.,0.)); +#64934 = ORIENTED_EDGE('',*,*,#64935,.F.); +#64935 = EDGE_CURVE('',#64778,#64928,#64936,.T.); +#64936 = LINE('',#64937,#64938); +#64937 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#64938 = VECTOR('',#64939,1.); +#64939 = DIRECTION('',(0.,0.,1.)); +#64940 = ORIENTED_EDGE('',*,*,#64777,.F.); +#64941 = PLANE('',#64942); +#64942 = AXIS2_PLACEMENT_3D('',#64943,#64944,#64945); +#64943 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64944 = DIRECTION('',(-1.,0.,0.)); +#64945 = DIRECTION('',(0.,1.,0.)); +#64946 = ADVANCED_FACE('',(#64947),#64974,.F.); +#64947 = FACE_BOUND('',#64948,.F.); +#64948 = EDGE_LOOP('',(#64949,#64960,#64966,#64967,#64968)); +#64949 = ORIENTED_EDGE('',*,*,#64950,.F.); +#64950 = EDGE_CURVE('',#64951,#64953,#64955,.T.); +#64951 = VERTEX_POINT('',#64952); +#64952 = CARTESIAN_POINT('',(-4.445,-12.475,0.8)); +#64953 = VERTEX_POINT('',#64954); +#64954 = CARTESIAN_POINT('',(-4.72,-12.75,0.8)); +#64955 = CIRCLE('',#64956,0.275); +#64956 = AXIS2_PLACEMENT_3D('',#64957,#64958,#64959); +#64957 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#64958 = DIRECTION('',(0.,-0.,1.)); +#64959 = DIRECTION('',(0.,1.,0.)); +#64960 = ORIENTED_EDGE('',*,*,#64961,.T.); +#64961 = EDGE_CURVE('',#64951,#64872,#64962,.T.); +#64962 = LINE('',#64963,#64964); +#64963 = CARTESIAN_POINT('',(-4.445,-12.475,0.8)); +#64964 = VECTOR('',#64965,1.); +#64965 = DIRECTION('',(0.,-0.,-1.)); +#64966 = ORIENTED_EDGE('',*,*,#64871,.T.); +#64967 = ORIENTED_EDGE('',*,*,#64824,.T.); +#64968 = ORIENTED_EDGE('',*,*,#64969,.T.); +#64969 = EDGE_CURVE('',#64817,#64953,#64970,.T.); +#64970 = LINE('',#64971,#64972); +#64971 = CARTESIAN_POINT('',(-4.72,-12.75,0.8)); +#64972 = VECTOR('',#64973,1.); +#64973 = DIRECTION('',(0.,0.,1.)); +#64974 = CYLINDRICAL_SURFACE('',#64975,0.275); +#64975 = AXIS2_PLACEMENT_3D('',#64976,#64977,#64978); +#64976 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#64977 = DIRECTION('',(0.,0.,1.)); +#64978 = DIRECTION('',(0.,1.,0.)); +#64979 = ADVANCED_FACE('',(#64980),#64991,.F.); +#64980 = FACE_BOUND('',#64981,.F.); +#64981 = EDGE_LOOP('',(#64982,#64983,#64984,#64990)); +#64982 = ORIENTED_EDGE('',*,*,#64816,.F.); +#64983 = ORIENTED_EDGE('',*,*,#64919,.T.); +#64984 = ORIENTED_EDGE('',*,*,#64985,.T.); +#64985 = EDGE_CURVE('',#64920,#64953,#64986,.T.); +#64986 = LINE('',#64987,#64988); +#64987 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#64988 = VECTOR('',#64989,1.); +#64989 = DIRECTION('',(1.,0.,0.)); +#64990 = ORIENTED_EDGE('',*,*,#64969,.F.); +#64991 = PLANE('',#64992); +#64992 = AXIS2_PLACEMENT_3D('',#64993,#64994,#64995); +#64993 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#64994 = DIRECTION('',(0.,1.,0.)); +#64995 = DIRECTION('',(1.,0.,0.)); +#64996 = ADVANCED_FACE('',(#64997),#65015,.T.); +#64997 = FACE_BOUND('',#64998,.T.); +#64998 = EDGE_LOOP('',(#64999,#65000,#65008,#65014)); +#64999 = ORIENTED_EDGE('',*,*,#64838,.T.); +#65000 = ORIENTED_EDGE('',*,*,#65001,.T.); +#65001 = EDGE_CURVE('',#64839,#65002,#65004,.T.); +#65002 = VERTEX_POINT('',#65003); +#65003 = CARTESIAN_POINT('',(-3.995,-11.9,0.)); +#65004 = LINE('',#65005,#65006); +#65005 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#65006 = VECTOR('',#65007,1.); +#65007 = DIRECTION('',(1.,0.,0.)); +#65008 = ORIENTED_EDGE('',*,*,#65009,.F.); +#65009 = EDGE_CURVE('',#64898,#65002,#65010,.T.); +#65010 = LINE('',#65011,#65012); +#65011 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#65012 = VECTOR('',#65013,1.); +#65013 = DIRECTION('',(0.,1.,0.)); +#65014 = ORIENTED_EDGE('',*,*,#64905,.F.); +#65015 = PLANE('',#65016); +#65016 = AXIS2_PLACEMENT_3D('',#65017,#65018,#65019); +#65017 = CARTESIAN_POINT('',(-4.895,-12.3,0.)); +#65018 = DIRECTION('',(0.,0.,-1.)); +#65019 = DIRECTION('',(1.,0.,0.)); +#65020 = ADVANCED_FACE('',(#65021),#65046,.F.); +#65021 = FACE_BOUND('',#65022,.F.); +#65022 = EDGE_LOOP('',(#65023,#65024,#65032,#65040)); +#65023 = ORIENTED_EDGE('',*,*,#64854,.T.); +#65024 = ORIENTED_EDGE('',*,*,#65025,.T.); +#65025 = EDGE_CURVE('',#64847,#65026,#65028,.T.); +#65026 = VERTEX_POINT('',#65027); +#65027 = CARTESIAN_POINT('',(-3.995,-11.9,0.4)); +#65028 = LINE('',#65029,#65030); +#65029 = CARTESIAN_POINT('',(-4.895,-11.9,0.4)); +#65030 = VECTOR('',#65031,1.); +#65031 = DIRECTION('',(1.,0.,0.)); +#65032 = ORIENTED_EDGE('',*,*,#65033,.F.); +#65033 = EDGE_CURVE('',#65034,#65026,#65036,.T.); +#65034 = VERTEX_POINT('',#65035); +#65035 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#65036 = LINE('',#65037,#65038); +#65037 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#65038 = VECTOR('',#65039,1.); +#65039 = DIRECTION('',(0.,1.,0.)); +#65040 = ORIENTED_EDGE('',*,*,#65041,.F.); +#65041 = EDGE_CURVE('',#64778,#65034,#65042,.T.); +#65042 = LINE('',#65043,#65044); +#65043 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#65044 = VECTOR('',#65045,1.); +#65045 = DIRECTION('',(1.,0.,0.)); +#65046 = PLANE('',#65047); +#65047 = AXIS2_PLACEMENT_3D('',#65048,#65049,#65050); +#65048 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#65049 = DIRECTION('',(0.,0.,-1.)); +#65050 = DIRECTION('',(1.,0.,0.)); +#65051 = ADVANCED_FACE('',(#65052),#65063,.T.); +#65052 = FACE_BOUND('',#65053,.T.); +#65053 = EDGE_LOOP('',(#65054,#65055,#65056,#65062)); +#65054 = ORIENTED_EDGE('',*,*,#64846,.T.); +#65055 = ORIENTED_EDGE('',*,*,#65025,.T.); +#65056 = ORIENTED_EDGE('',*,*,#65057,.F.); +#65057 = EDGE_CURVE('',#65002,#65026,#65058,.T.); +#65058 = LINE('',#65059,#65060); +#65059 = CARTESIAN_POINT('',(-3.995,-11.9,0.)); +#65060 = VECTOR('',#65061,1.); +#65061 = DIRECTION('',(0.,0.,1.)); +#65062 = ORIENTED_EDGE('',*,*,#65001,.F.); +#65063 = PLANE('',#65064); +#65064 = AXIS2_PLACEMENT_3D('',#65065,#65066,#65067); +#65065 = CARTESIAN_POINT('',(-4.895,-11.9,0.)); +#65066 = DIRECTION('',(0.,1.,0.)); +#65067 = DIRECTION('',(1.,0.,0.)); +#65068 = ADVANCED_FACE('',(#65069),#65092,.T.); +#65069 = FACE_BOUND('',#65070,.T.); +#65070 = EDGE_LOOP('',(#65071,#65077,#65085,#65091)); +#65071 = ORIENTED_EDGE('',*,*,#65072,.T.); +#65072 = EDGE_CURVE('',#64898,#65034,#65073,.T.); +#65073 = LINE('',#65074,#65075); +#65074 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#65075 = VECTOR('',#65076,1.); +#65076 = DIRECTION('',(0.,0.,1.)); +#65077 = ORIENTED_EDGE('',*,*,#65078,.T.); +#65078 = EDGE_CURVE('',#65034,#65079,#65081,.T.); +#65079 = VERTEX_POINT('',#65080); +#65080 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#65081 = LINE('',#65082,#65083); +#65082 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#65083 = VECTOR('',#65084,1.); +#65084 = DIRECTION('',(0.,-1.,0.)); +#65085 = ORIENTED_EDGE('',*,*,#65086,.F.); +#65086 = EDGE_CURVE('',#64890,#65079,#65087,.T.); +#65087 = LINE('',#65088,#65089); +#65088 = CARTESIAN_POINT('',(-3.995,-12.75,0.)); +#65089 = VECTOR('',#65090,1.); +#65090 = DIRECTION('',(0.,0.,1.)); +#65091 = ORIENTED_EDGE('',*,*,#64897,.F.); +#65092 = PLANE('',#65093); +#65093 = AXIS2_PLACEMENT_3D('',#65094,#65095,#65096); +#65094 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#65095 = DIRECTION('',(1.,0.,0.)); +#65096 = DIRECTION('',(0.,-1.,0.)); +#65097 = ADVANCED_FACE('',(#65098),#65116,.F.); +#65098 = FACE_BOUND('',#65099,.F.); +#65099 = EDGE_LOOP('',(#65100,#65101,#65109,#65115)); +#65100 = ORIENTED_EDGE('',*,*,#64889,.F.); +#65101 = ORIENTED_EDGE('',*,*,#65102,.T.); +#65102 = EDGE_CURVE('',#64881,#65103,#65105,.T.); +#65103 = VERTEX_POINT('',#65104); +#65104 = CARTESIAN_POINT('',(-4.17,-12.75,0.4)); +#65105 = LINE('',#65106,#65107); +#65106 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#65107 = VECTOR('',#65108,1.); +#65108 = DIRECTION('',(0.,0.,1.)); +#65109 = ORIENTED_EDGE('',*,*,#65110,.T.); +#65110 = EDGE_CURVE('',#65103,#65079,#65111,.T.); +#65111 = LINE('',#65112,#65113); +#65112 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#65113 = VECTOR('',#65114,1.); +#65114 = DIRECTION('',(1.,0.,0.)); +#65115 = ORIENTED_EDGE('',*,*,#65086,.F.); +#65116 = PLANE('',#65117); +#65117 = AXIS2_PLACEMENT_3D('',#65118,#65119,#65120); +#65118 = CARTESIAN_POINT('',(-4.895,-12.75,0.)); +#65119 = DIRECTION('',(0.,1.,0.)); +#65120 = DIRECTION('',(1.,0.,0.)); +#65121 = ADVANCED_FACE('',(#65122),#65142,.F.); +#65122 = FACE_BOUND('',#65123,.F.); +#65123 = EDGE_LOOP('',(#65124,#65125,#65134,#65140,#65141)); +#65124 = ORIENTED_EDGE('',*,*,#64961,.F.); +#65125 = ORIENTED_EDGE('',*,*,#65126,.F.); +#65126 = EDGE_CURVE('',#65127,#64951,#65129,.T.); +#65127 = VERTEX_POINT('',#65128); +#65128 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#65129 = CIRCLE('',#65130,0.275); +#65130 = AXIS2_PLACEMENT_3D('',#65131,#65132,#65133); +#65131 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#65132 = DIRECTION('',(0.,-0.,1.)); +#65133 = DIRECTION('',(0.,1.,0.)); +#65134 = ORIENTED_EDGE('',*,*,#65135,.F.); +#65135 = EDGE_CURVE('',#65103,#65127,#65136,.T.); +#65136 = LINE('',#65137,#65138); +#65137 = CARTESIAN_POINT('',(-4.17,-12.75,0.8)); +#65138 = VECTOR('',#65139,1.); +#65139 = DIRECTION('',(0.,0.,1.)); +#65140 = ORIENTED_EDGE('',*,*,#65102,.F.); +#65141 = ORIENTED_EDGE('',*,*,#64880,.T.); +#65142 = CYLINDRICAL_SURFACE('',#65143,0.275); +#65143 = AXIS2_PLACEMENT_3D('',#65144,#65145,#65146); +#65144 = CARTESIAN_POINT('',(-4.445,-12.75,0.8)); +#65145 = DIRECTION('',(0.,0.,1.)); +#65146 = DIRECTION('',(0.,1.,0.)); +#65147 = ADVANCED_FACE('',(#65148),#65166,.T.); +#65148 = FACE_BOUND('',#65149,.T.); +#65149 = EDGE_LOOP('',(#65150,#65151,#65159,#65165)); +#65150 = ORIENTED_EDGE('',*,*,#64935,.T.); +#65151 = ORIENTED_EDGE('',*,*,#65152,.T.); +#65152 = EDGE_CURVE('',#64928,#65153,#65155,.T.); +#65153 = VERTEX_POINT('',#65154); +#65154 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#65155 = LINE('',#65156,#65157); +#65156 = CARTESIAN_POINT('',(-4.895,-12.3,0.8)); +#65157 = VECTOR('',#65158,1.); +#65158 = DIRECTION('',(1.,0.,0.)); +#65159 = ORIENTED_EDGE('',*,*,#65160,.F.); +#65160 = EDGE_CURVE('',#65034,#65153,#65161,.T.); +#65161 = LINE('',#65162,#65163); +#65162 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#65163 = VECTOR('',#65164,1.); +#65164 = DIRECTION('',(0.,0.,1.)); +#65165 = ORIENTED_EDGE('',*,*,#65041,.F.); +#65166 = PLANE('',#65167); +#65167 = AXIS2_PLACEMENT_3D('',#65168,#65169,#65170); +#65168 = CARTESIAN_POINT('',(-4.895,-12.3,0.4)); +#65169 = DIRECTION('',(0.,1.,0.)); +#65170 = DIRECTION('',(1.,0.,0.)); +#65171 = ADVANCED_FACE('',(#65172),#65193,.T.); +#65172 = FACE_BOUND('',#65173,.T.); +#65173 = EDGE_LOOP('',(#65174,#65175,#65176,#65177,#65178,#65186,#65192) + ); +#65174 = ORIENTED_EDGE('',*,*,#64927,.F.); +#65175 = ORIENTED_EDGE('',*,*,#64985,.T.); +#65176 = ORIENTED_EDGE('',*,*,#64950,.F.); +#65177 = ORIENTED_EDGE('',*,*,#65126,.F.); +#65178 = ORIENTED_EDGE('',*,*,#65179,.T.); +#65179 = EDGE_CURVE('',#65127,#65180,#65182,.T.); +#65180 = VERTEX_POINT('',#65181); +#65181 = CARTESIAN_POINT('',(-3.995,-12.75,0.8)); +#65182 = LINE('',#65183,#65184); +#65183 = CARTESIAN_POINT('',(-4.895,-12.75,0.8)); +#65184 = VECTOR('',#65185,1.); +#65185 = DIRECTION('',(1.,0.,0.)); +#65186 = ORIENTED_EDGE('',*,*,#65187,.F.); +#65187 = EDGE_CURVE('',#65153,#65180,#65188,.T.); +#65188 = LINE('',#65189,#65190); +#65189 = CARTESIAN_POINT('',(-3.995,-12.3,0.8)); +#65190 = VECTOR('',#65191,1.); +#65191 = DIRECTION('',(0.,-1.,0.)); +#65192 = ORIENTED_EDGE('',*,*,#65152,.F.); +#65193 = PLANE('',#65194); +#65194 = AXIS2_PLACEMENT_3D('',#65195,#65196,#65197); +#65195 = CARTESIAN_POINT('',(-4.445,-12.525,0.8)); +#65196 = DIRECTION('',(0.,0.,1.)); +#65197 = DIRECTION('',(0.,1.,0.)); +#65198 = ADVANCED_FACE('',(#65199),#65205,.T.); +#65199 = FACE_BOUND('',#65200,.T.); +#65200 = EDGE_LOOP('',(#65201,#65202,#65203,#65204)); +#65201 = ORIENTED_EDGE('',*,*,#65009,.T.); +#65202 = ORIENTED_EDGE('',*,*,#65057,.T.); +#65203 = ORIENTED_EDGE('',*,*,#65033,.F.); +#65204 = ORIENTED_EDGE('',*,*,#65072,.F.); +#65205 = PLANE('',#65206); +#65206 = AXIS2_PLACEMENT_3D('',#65207,#65208,#65209); +#65207 = CARTESIAN_POINT('',(-3.995,-12.3,0.)); +#65208 = DIRECTION('',(1.,0.,0.)); +#65209 = DIRECTION('',(0.,0.,1.)); +#65210 = ADVANCED_FACE('',(#65211),#65222,.T.); +#65211 = FACE_BOUND('',#65212,.T.); +#65212 = EDGE_LOOP('',(#65213,#65214,#65215,#65221)); +#65213 = ORIENTED_EDGE('',*,*,#65160,.T.); +#65214 = ORIENTED_EDGE('',*,*,#65187,.T.); +#65215 = ORIENTED_EDGE('',*,*,#65216,.F.); +#65216 = EDGE_CURVE('',#65079,#65180,#65217,.T.); +#65217 = LINE('',#65218,#65219); +#65218 = CARTESIAN_POINT('',(-3.995,-12.75,0.4)); +#65219 = VECTOR('',#65220,1.); +#65220 = DIRECTION('',(0.,0.,1.)); +#65221 = ORIENTED_EDGE('',*,*,#65078,.F.); +#65222 = PLANE('',#65223); +#65223 = AXIS2_PLACEMENT_3D('',#65224,#65225,#65226); +#65224 = CARTESIAN_POINT('',(-3.995,-12.3,0.4)); +#65225 = DIRECTION('',(1.,0.,0.)); +#65226 = DIRECTION('',(0.,-1.,0.)); +#65227 = ADVANCED_FACE('',(#65228),#65234,.F.); +#65228 = FACE_BOUND('',#65229,.F.); +#65229 = EDGE_LOOP('',(#65230,#65231,#65232,#65233)); +#65230 = ORIENTED_EDGE('',*,*,#65110,.F.); +#65231 = ORIENTED_EDGE('',*,*,#65135,.T.); +#65232 = ORIENTED_EDGE('',*,*,#65179,.T.); +#65233 = ORIENTED_EDGE('',*,*,#65216,.F.); +#65234 = PLANE('',#65235); +#65235 = AXIS2_PLACEMENT_3D('',#65236,#65237,#65238); +#65236 = CARTESIAN_POINT('',(-4.895,-12.75,0.4)); +#65237 = DIRECTION('',(0.,1.,0.)); +#65238 = DIRECTION('',(1.,0.,0.)); +#65239 = MANIFOLD_SOLID_BREP('',#65240); +#65240 = CLOSED_SHELL('',(#65241,#65281,#65312,#65343,#65393,#65424, + #65457,#65474,#65498,#65529,#65546,#65575,#65599,#65625,#65649, + #65676,#65688,#65705)); +#65241 = ADVANCED_FACE('',(#65242),#65276,.T.); +#65242 = FACE_BOUND('',#65243,.T.); +#65243 = EDGE_LOOP('',(#65244,#65254,#65262,#65270)); +#65244 = ORIENTED_EDGE('',*,*,#65245,.T.); +#65245 = EDGE_CURVE('',#65246,#65248,#65250,.T.); +#65246 = VERTEX_POINT('',#65247); +#65247 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65248 = VERTEX_POINT('',#65249); +#65249 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65250 = LINE('',#65251,#65252); +#65251 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65252 = VECTOR('',#65253,1.); +#65253 = DIRECTION('',(0.,0.,1.)); +#65254 = ORIENTED_EDGE('',*,*,#65255,.T.); +#65255 = EDGE_CURVE('',#65248,#65256,#65258,.T.); +#65256 = VERTEX_POINT('',#65257); +#65257 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65258 = LINE('',#65259,#65260); +#65259 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65260 = VECTOR('',#65261,1.); +#65261 = DIRECTION('',(0.,1.,0.)); +#65262 = ORIENTED_EDGE('',*,*,#65263,.F.); +#65263 = EDGE_CURVE('',#65264,#65256,#65266,.T.); +#65264 = VERTEX_POINT('',#65265); +#65265 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65266 = LINE('',#65267,#65268); +#65267 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65268 = VECTOR('',#65269,1.); +#65269 = DIRECTION('',(0.,0.,1.)); +#65270 = ORIENTED_EDGE('',*,*,#65271,.F.); +#65271 = EDGE_CURVE('',#65246,#65264,#65272,.T.); +#65272 = LINE('',#65273,#65274); +#65273 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65274 = VECTOR('',#65275,1.); +#65275 = DIRECTION('',(0.,1.,0.)); +#65276 = PLANE('',#65277); +#65277 = AXIS2_PLACEMENT_3D('',#65278,#65279,#65280); +#65278 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65279 = DIRECTION('',(-1.,0.,0.)); +#65280 = DIRECTION('',(0.,1.,0.)); +#65281 = ADVANCED_FACE('',(#65282),#65307,.F.); +#65282 = FACE_BOUND('',#65283,.F.); +#65283 = EDGE_LOOP('',(#65284,#65292,#65293,#65301)); +#65284 = ORIENTED_EDGE('',*,*,#65285,.F.); +#65285 = EDGE_CURVE('',#65246,#65286,#65288,.T.); +#65286 = VERTEX_POINT('',#65287); +#65287 = CARTESIAN_POINT('',(-3.45,-12.75,0.)); +#65288 = LINE('',#65289,#65290); +#65289 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65290 = VECTOR('',#65291,1.); +#65291 = DIRECTION('',(1.,0.,0.)); +#65292 = ORIENTED_EDGE('',*,*,#65245,.T.); +#65293 = ORIENTED_EDGE('',*,*,#65294,.T.); +#65294 = EDGE_CURVE('',#65248,#65295,#65297,.T.); +#65295 = VERTEX_POINT('',#65296); +#65296 = CARTESIAN_POINT('',(-3.45,-12.75,0.4)); +#65297 = LINE('',#65298,#65299); +#65298 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65299 = VECTOR('',#65300,1.); +#65300 = DIRECTION('',(1.,0.,0.)); +#65301 = ORIENTED_EDGE('',*,*,#65302,.F.); +#65302 = EDGE_CURVE('',#65286,#65295,#65303,.T.); +#65303 = LINE('',#65304,#65305); +#65304 = CARTESIAN_POINT('',(-3.45,-12.75,0.8)); +#65305 = VECTOR('',#65306,1.); +#65306 = DIRECTION('',(0.,0.,1.)); +#65307 = PLANE('',#65308); +#65308 = AXIS2_PLACEMENT_3D('',#65309,#65310,#65311); +#65309 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65310 = DIRECTION('',(0.,1.,0.)); +#65311 = DIRECTION('',(1.,0.,0.)); +#65312 = ADVANCED_FACE('',(#65313),#65338,.F.); +#65313 = FACE_BOUND('',#65314,.F.); +#65314 = EDGE_LOOP('',(#65315,#65323,#65331,#65337)); +#65315 = ORIENTED_EDGE('',*,*,#65316,.T.); +#65316 = EDGE_CURVE('',#65264,#65317,#65319,.T.); +#65317 = VERTEX_POINT('',#65318); +#65318 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#65319 = LINE('',#65320,#65321); +#65320 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65321 = VECTOR('',#65322,1.); +#65322 = DIRECTION('',(0.,1.,0.)); +#65323 = ORIENTED_EDGE('',*,*,#65324,.T.); +#65324 = EDGE_CURVE('',#65317,#65325,#65327,.T.); +#65325 = VERTEX_POINT('',#65326); +#65326 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#65327 = LINE('',#65328,#65329); +#65328 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#65329 = VECTOR('',#65330,1.); +#65330 = DIRECTION('',(0.,0.,1.)); +#65331 = ORIENTED_EDGE('',*,*,#65332,.F.); +#65332 = EDGE_CURVE('',#65256,#65325,#65333,.T.); +#65333 = LINE('',#65334,#65335); +#65334 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65335 = VECTOR('',#65336,1.); +#65336 = DIRECTION('',(0.,1.,0.)); +#65337 = ORIENTED_EDGE('',*,*,#65263,.F.); +#65338 = PLANE('',#65339); +#65339 = AXIS2_PLACEMENT_3D('',#65340,#65341,#65342); +#65340 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65341 = DIRECTION('',(1.,0.,0.)); +#65342 = DIRECTION('',(0.,0.,1.)); +#65343 = ADVANCED_FACE('',(#65344),#65388,.F.); +#65344 = FACE_BOUND('',#65345,.F.); +#65345 = EDGE_LOOP('',(#65346,#65347,#65348,#65357,#65366,#65374,#65382) + ); +#65346 = ORIENTED_EDGE('',*,*,#65271,.F.); +#65347 = ORIENTED_EDGE('',*,*,#65285,.T.); +#65348 = ORIENTED_EDGE('',*,*,#65349,.F.); +#65349 = EDGE_CURVE('',#65350,#65286,#65352,.T.); +#65350 = VERTEX_POINT('',#65351); +#65351 = CARTESIAN_POINT('',(-3.175,-12.475,0.)); +#65352 = CIRCLE('',#65353,0.275); +#65353 = AXIS2_PLACEMENT_3D('',#65354,#65355,#65356); +#65354 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#65355 = DIRECTION('',(0.,-0.,1.)); +#65356 = DIRECTION('',(0.,1.,0.)); +#65357 = ORIENTED_EDGE('',*,*,#65358,.F.); +#65358 = EDGE_CURVE('',#65359,#65350,#65361,.T.); +#65359 = VERTEX_POINT('',#65360); +#65360 = CARTESIAN_POINT('',(-2.9,-12.75,0.)); +#65361 = CIRCLE('',#65362,0.275); +#65362 = AXIS2_PLACEMENT_3D('',#65363,#65364,#65365); +#65363 = CARTESIAN_POINT('',(-3.175,-12.75,0.)); +#65364 = DIRECTION('',(0.,-0.,1.)); +#65365 = DIRECTION('',(0.,1.,0.)); +#65366 = ORIENTED_EDGE('',*,*,#65367,.T.); +#65367 = EDGE_CURVE('',#65359,#65368,#65370,.T.); +#65368 = VERTEX_POINT('',#65369); +#65369 = CARTESIAN_POINT('',(-2.725,-12.75,0.)); +#65370 = LINE('',#65371,#65372); +#65371 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65372 = VECTOR('',#65373,1.); +#65373 = DIRECTION('',(1.,0.,0.)); +#65374 = ORIENTED_EDGE('',*,*,#65375,.F.); +#65375 = EDGE_CURVE('',#65376,#65368,#65378,.T.); +#65376 = VERTEX_POINT('',#65377); +#65377 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65378 = LINE('',#65379,#65380); +#65379 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65380 = VECTOR('',#65381,1.); +#65381 = DIRECTION('',(0.,-1.,0.)); +#65382 = ORIENTED_EDGE('',*,*,#65383,.F.); +#65383 = EDGE_CURVE('',#65264,#65376,#65384,.T.); +#65384 = LINE('',#65385,#65386); +#65385 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65386 = VECTOR('',#65387,1.); +#65387 = DIRECTION('',(1.,0.,0.)); +#65388 = PLANE('',#65389); +#65389 = AXIS2_PLACEMENT_3D('',#65390,#65391,#65392); +#65390 = CARTESIAN_POINT('',(-3.175,-12.525,0.)); +#65391 = DIRECTION('',(0.,0.,1.)); +#65392 = DIRECTION('',(0.,1.,0.)); +#65393 = ADVANCED_FACE('',(#65394),#65419,.T.); +#65394 = FACE_BOUND('',#65395,.T.); +#65395 = EDGE_LOOP('',(#65396,#65404,#65412,#65418)); +#65396 = ORIENTED_EDGE('',*,*,#65397,.T.); +#65397 = EDGE_CURVE('',#65248,#65398,#65400,.T.); +#65398 = VERTEX_POINT('',#65399); +#65399 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#65400 = LINE('',#65401,#65402); +#65401 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65402 = VECTOR('',#65403,1.); +#65403 = DIRECTION('',(0.,0.,1.)); +#65404 = ORIENTED_EDGE('',*,*,#65405,.T.); +#65405 = EDGE_CURVE('',#65398,#65406,#65408,.T.); +#65406 = VERTEX_POINT('',#65407); +#65407 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#65408 = LINE('',#65409,#65410); +#65409 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#65410 = VECTOR('',#65411,1.); +#65411 = DIRECTION('',(0.,1.,0.)); +#65412 = ORIENTED_EDGE('',*,*,#65413,.F.); +#65413 = EDGE_CURVE('',#65256,#65406,#65414,.T.); +#65414 = LINE('',#65415,#65416); +#65415 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65416 = VECTOR('',#65417,1.); +#65417 = DIRECTION('',(0.,0.,1.)); +#65418 = ORIENTED_EDGE('',*,*,#65255,.F.); +#65419 = PLANE('',#65420); +#65420 = AXIS2_PLACEMENT_3D('',#65421,#65422,#65423); +#65421 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65422 = DIRECTION('',(-1.,0.,0.)); +#65423 = DIRECTION('',(0.,1.,0.)); +#65424 = ADVANCED_FACE('',(#65425),#65452,.F.); +#65425 = FACE_BOUND('',#65426,.F.); +#65426 = EDGE_LOOP('',(#65427,#65438,#65444,#65445,#65446)); +#65427 = ORIENTED_EDGE('',*,*,#65428,.F.); +#65428 = EDGE_CURVE('',#65429,#65431,#65433,.T.); +#65429 = VERTEX_POINT('',#65430); +#65430 = CARTESIAN_POINT('',(-3.175,-12.475,0.8)); +#65431 = VERTEX_POINT('',#65432); +#65432 = CARTESIAN_POINT('',(-3.45,-12.75,0.8)); +#65433 = CIRCLE('',#65434,0.275); +#65434 = AXIS2_PLACEMENT_3D('',#65435,#65436,#65437); +#65435 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#65436 = DIRECTION('',(0.,-0.,1.)); +#65437 = DIRECTION('',(0.,1.,0.)); +#65438 = ORIENTED_EDGE('',*,*,#65439,.T.); +#65439 = EDGE_CURVE('',#65429,#65350,#65440,.T.); +#65440 = LINE('',#65441,#65442); +#65441 = CARTESIAN_POINT('',(-3.175,-12.475,0.8)); +#65442 = VECTOR('',#65443,1.); +#65443 = DIRECTION('',(0.,-0.,-1.)); +#65444 = ORIENTED_EDGE('',*,*,#65349,.T.); +#65445 = ORIENTED_EDGE('',*,*,#65302,.T.); +#65446 = ORIENTED_EDGE('',*,*,#65447,.T.); +#65447 = EDGE_CURVE('',#65295,#65431,#65448,.T.); +#65448 = LINE('',#65449,#65450); +#65449 = CARTESIAN_POINT('',(-3.45,-12.75,0.8)); +#65450 = VECTOR('',#65451,1.); +#65451 = DIRECTION('',(0.,0.,1.)); +#65452 = CYLINDRICAL_SURFACE('',#65453,0.275); +#65453 = AXIS2_PLACEMENT_3D('',#65454,#65455,#65456); +#65454 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#65455 = DIRECTION('',(0.,0.,1.)); +#65456 = DIRECTION('',(0.,1.,0.)); +#65457 = ADVANCED_FACE('',(#65458),#65469,.F.); +#65458 = FACE_BOUND('',#65459,.F.); +#65459 = EDGE_LOOP('',(#65460,#65461,#65462,#65468)); +#65460 = ORIENTED_EDGE('',*,*,#65294,.F.); +#65461 = ORIENTED_EDGE('',*,*,#65397,.T.); +#65462 = ORIENTED_EDGE('',*,*,#65463,.T.); +#65463 = EDGE_CURVE('',#65398,#65431,#65464,.T.); +#65464 = LINE('',#65465,#65466); +#65465 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#65466 = VECTOR('',#65467,1.); +#65467 = DIRECTION('',(1.,0.,0.)); +#65468 = ORIENTED_EDGE('',*,*,#65447,.F.); +#65469 = PLANE('',#65470); +#65470 = AXIS2_PLACEMENT_3D('',#65471,#65472,#65473); +#65471 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65472 = DIRECTION('',(0.,1.,0.)); +#65473 = DIRECTION('',(1.,0.,0.)); +#65474 = ADVANCED_FACE('',(#65475),#65493,.T.); +#65475 = FACE_BOUND('',#65476,.T.); +#65476 = EDGE_LOOP('',(#65477,#65478,#65486,#65492)); +#65477 = ORIENTED_EDGE('',*,*,#65316,.T.); +#65478 = ORIENTED_EDGE('',*,*,#65479,.T.); +#65479 = EDGE_CURVE('',#65317,#65480,#65482,.T.); +#65480 = VERTEX_POINT('',#65481); +#65481 = CARTESIAN_POINT('',(-2.725,-11.9,0.)); +#65482 = LINE('',#65483,#65484); +#65483 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#65484 = VECTOR('',#65485,1.); +#65485 = DIRECTION('',(1.,0.,0.)); +#65486 = ORIENTED_EDGE('',*,*,#65487,.F.); +#65487 = EDGE_CURVE('',#65376,#65480,#65488,.T.); +#65488 = LINE('',#65489,#65490); +#65489 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65490 = VECTOR('',#65491,1.); +#65491 = DIRECTION('',(0.,1.,0.)); +#65492 = ORIENTED_EDGE('',*,*,#65383,.F.); +#65493 = PLANE('',#65494); +#65494 = AXIS2_PLACEMENT_3D('',#65495,#65496,#65497); +#65495 = CARTESIAN_POINT('',(-3.625,-12.3,0.)); +#65496 = DIRECTION('',(0.,0.,-1.)); +#65497 = DIRECTION('',(1.,0.,0.)); +#65498 = ADVANCED_FACE('',(#65499),#65524,.F.); +#65499 = FACE_BOUND('',#65500,.F.); +#65500 = EDGE_LOOP('',(#65501,#65502,#65510,#65518)); +#65501 = ORIENTED_EDGE('',*,*,#65332,.T.); +#65502 = ORIENTED_EDGE('',*,*,#65503,.T.); +#65503 = EDGE_CURVE('',#65325,#65504,#65506,.T.); +#65504 = VERTEX_POINT('',#65505); +#65505 = CARTESIAN_POINT('',(-2.725,-11.9,0.4)); +#65506 = LINE('',#65507,#65508); +#65507 = CARTESIAN_POINT('',(-3.625,-11.9,0.4)); +#65508 = VECTOR('',#65509,1.); +#65509 = DIRECTION('',(1.,0.,0.)); +#65510 = ORIENTED_EDGE('',*,*,#65511,.F.); +#65511 = EDGE_CURVE('',#65512,#65504,#65514,.T.); +#65512 = VERTEX_POINT('',#65513); +#65513 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#65514 = LINE('',#65515,#65516); +#65515 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#65516 = VECTOR('',#65517,1.); +#65517 = DIRECTION('',(0.,1.,0.)); +#65518 = ORIENTED_EDGE('',*,*,#65519,.F.); +#65519 = EDGE_CURVE('',#65256,#65512,#65520,.T.); +#65520 = LINE('',#65521,#65522); +#65521 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65522 = VECTOR('',#65523,1.); +#65523 = DIRECTION('',(1.,0.,0.)); +#65524 = PLANE('',#65525); +#65525 = AXIS2_PLACEMENT_3D('',#65526,#65527,#65528); +#65526 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65527 = DIRECTION('',(0.,0.,-1.)); +#65528 = DIRECTION('',(1.,0.,0.)); +#65529 = ADVANCED_FACE('',(#65530),#65541,.T.); +#65530 = FACE_BOUND('',#65531,.T.); +#65531 = EDGE_LOOP('',(#65532,#65533,#65534,#65540)); +#65532 = ORIENTED_EDGE('',*,*,#65324,.T.); +#65533 = ORIENTED_EDGE('',*,*,#65503,.T.); +#65534 = ORIENTED_EDGE('',*,*,#65535,.F.); +#65535 = EDGE_CURVE('',#65480,#65504,#65536,.T.); +#65536 = LINE('',#65537,#65538); +#65537 = CARTESIAN_POINT('',(-2.725,-11.9,0.)); +#65538 = VECTOR('',#65539,1.); +#65539 = DIRECTION('',(0.,0.,1.)); +#65540 = ORIENTED_EDGE('',*,*,#65479,.F.); +#65541 = PLANE('',#65542); +#65542 = AXIS2_PLACEMENT_3D('',#65543,#65544,#65545); +#65543 = CARTESIAN_POINT('',(-3.625,-11.9,0.)); +#65544 = DIRECTION('',(0.,1.,0.)); +#65545 = DIRECTION('',(1.,0.,0.)); +#65546 = ADVANCED_FACE('',(#65547),#65570,.T.); +#65547 = FACE_BOUND('',#65548,.T.); +#65548 = EDGE_LOOP('',(#65549,#65555,#65563,#65569)); +#65549 = ORIENTED_EDGE('',*,*,#65550,.T.); +#65550 = EDGE_CURVE('',#65376,#65512,#65551,.T.); +#65551 = LINE('',#65552,#65553); +#65552 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65553 = VECTOR('',#65554,1.); +#65554 = DIRECTION('',(0.,0.,1.)); +#65555 = ORIENTED_EDGE('',*,*,#65556,.T.); +#65556 = EDGE_CURVE('',#65512,#65557,#65559,.T.); +#65557 = VERTEX_POINT('',#65558); +#65558 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#65559 = LINE('',#65560,#65561); +#65560 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#65561 = VECTOR('',#65562,1.); +#65562 = DIRECTION('',(0.,-1.,0.)); +#65563 = ORIENTED_EDGE('',*,*,#65564,.F.); +#65564 = EDGE_CURVE('',#65368,#65557,#65565,.T.); +#65565 = LINE('',#65566,#65567); +#65566 = CARTESIAN_POINT('',(-2.725,-12.75,0.)); +#65567 = VECTOR('',#65568,1.); +#65568 = DIRECTION('',(0.,0.,1.)); +#65569 = ORIENTED_EDGE('',*,*,#65375,.F.); +#65570 = PLANE('',#65571); +#65571 = AXIS2_PLACEMENT_3D('',#65572,#65573,#65574); +#65572 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65573 = DIRECTION('',(1.,0.,0.)); +#65574 = DIRECTION('',(0.,-1.,0.)); +#65575 = ADVANCED_FACE('',(#65576),#65594,.F.); +#65576 = FACE_BOUND('',#65577,.F.); +#65577 = EDGE_LOOP('',(#65578,#65579,#65587,#65593)); +#65578 = ORIENTED_EDGE('',*,*,#65367,.F.); +#65579 = ORIENTED_EDGE('',*,*,#65580,.T.); +#65580 = EDGE_CURVE('',#65359,#65581,#65583,.T.); +#65581 = VERTEX_POINT('',#65582); +#65582 = CARTESIAN_POINT('',(-2.9,-12.75,0.4)); +#65583 = LINE('',#65584,#65585); +#65584 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#65585 = VECTOR('',#65586,1.); +#65586 = DIRECTION('',(0.,0.,1.)); +#65587 = ORIENTED_EDGE('',*,*,#65588,.T.); +#65588 = EDGE_CURVE('',#65581,#65557,#65589,.T.); +#65589 = LINE('',#65590,#65591); +#65590 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65591 = VECTOR('',#65592,1.); +#65592 = DIRECTION('',(1.,0.,0.)); +#65593 = ORIENTED_EDGE('',*,*,#65564,.F.); +#65594 = PLANE('',#65595); +#65595 = AXIS2_PLACEMENT_3D('',#65596,#65597,#65598); +#65596 = CARTESIAN_POINT('',(-3.625,-12.75,0.)); +#65597 = DIRECTION('',(0.,1.,0.)); +#65598 = DIRECTION('',(1.,0.,0.)); +#65599 = ADVANCED_FACE('',(#65600),#65620,.F.); +#65600 = FACE_BOUND('',#65601,.F.); +#65601 = EDGE_LOOP('',(#65602,#65603,#65612,#65618,#65619)); +#65602 = ORIENTED_EDGE('',*,*,#65439,.F.); +#65603 = ORIENTED_EDGE('',*,*,#65604,.F.); +#65604 = EDGE_CURVE('',#65605,#65429,#65607,.T.); +#65605 = VERTEX_POINT('',#65606); +#65606 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#65607 = CIRCLE('',#65608,0.275); +#65608 = AXIS2_PLACEMENT_3D('',#65609,#65610,#65611); +#65609 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#65610 = DIRECTION('',(0.,-0.,1.)); +#65611 = DIRECTION('',(0.,1.,0.)); +#65612 = ORIENTED_EDGE('',*,*,#65613,.F.); +#65613 = EDGE_CURVE('',#65581,#65605,#65614,.T.); +#65614 = LINE('',#65615,#65616); +#65615 = CARTESIAN_POINT('',(-2.9,-12.75,0.8)); +#65616 = VECTOR('',#65617,1.); +#65617 = DIRECTION('',(0.,0.,1.)); +#65618 = ORIENTED_EDGE('',*,*,#65580,.F.); +#65619 = ORIENTED_EDGE('',*,*,#65358,.T.); +#65620 = CYLINDRICAL_SURFACE('',#65621,0.275); +#65621 = AXIS2_PLACEMENT_3D('',#65622,#65623,#65624); +#65622 = CARTESIAN_POINT('',(-3.175,-12.75,0.8)); +#65623 = DIRECTION('',(0.,0.,1.)); +#65624 = DIRECTION('',(0.,1.,0.)); +#65625 = ADVANCED_FACE('',(#65626),#65644,.T.); +#65626 = FACE_BOUND('',#65627,.T.); +#65627 = EDGE_LOOP('',(#65628,#65629,#65637,#65643)); +#65628 = ORIENTED_EDGE('',*,*,#65413,.T.); +#65629 = ORIENTED_EDGE('',*,*,#65630,.T.); +#65630 = EDGE_CURVE('',#65406,#65631,#65633,.T.); +#65631 = VERTEX_POINT('',#65632); +#65632 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#65633 = LINE('',#65634,#65635); +#65634 = CARTESIAN_POINT('',(-3.625,-12.3,0.8)); +#65635 = VECTOR('',#65636,1.); +#65636 = DIRECTION('',(1.,0.,0.)); +#65637 = ORIENTED_EDGE('',*,*,#65638,.F.); +#65638 = EDGE_CURVE('',#65512,#65631,#65639,.T.); +#65639 = LINE('',#65640,#65641); +#65640 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#65641 = VECTOR('',#65642,1.); +#65642 = DIRECTION('',(0.,0.,1.)); +#65643 = ORIENTED_EDGE('',*,*,#65519,.F.); +#65644 = PLANE('',#65645); +#65645 = AXIS2_PLACEMENT_3D('',#65646,#65647,#65648); +#65646 = CARTESIAN_POINT('',(-3.625,-12.3,0.4)); +#65647 = DIRECTION('',(0.,1.,0.)); +#65648 = DIRECTION('',(1.,0.,0.)); +#65649 = ADVANCED_FACE('',(#65650),#65671,.T.); +#65650 = FACE_BOUND('',#65651,.T.); +#65651 = EDGE_LOOP('',(#65652,#65653,#65654,#65655,#65656,#65664,#65670) + ); +#65652 = ORIENTED_EDGE('',*,*,#65405,.F.); +#65653 = ORIENTED_EDGE('',*,*,#65463,.T.); +#65654 = ORIENTED_EDGE('',*,*,#65428,.F.); +#65655 = ORIENTED_EDGE('',*,*,#65604,.F.); +#65656 = ORIENTED_EDGE('',*,*,#65657,.T.); +#65657 = EDGE_CURVE('',#65605,#65658,#65660,.T.); +#65658 = VERTEX_POINT('',#65659); +#65659 = CARTESIAN_POINT('',(-2.725,-12.75,0.8)); +#65660 = LINE('',#65661,#65662); +#65661 = CARTESIAN_POINT('',(-3.625,-12.75,0.8)); +#65662 = VECTOR('',#65663,1.); +#65663 = DIRECTION('',(1.,0.,0.)); +#65664 = ORIENTED_EDGE('',*,*,#65665,.F.); +#65665 = EDGE_CURVE('',#65631,#65658,#65666,.T.); +#65666 = LINE('',#65667,#65668); +#65667 = CARTESIAN_POINT('',(-2.725,-12.3,0.8)); +#65668 = VECTOR('',#65669,1.); +#65669 = DIRECTION('',(0.,-1.,0.)); +#65670 = ORIENTED_EDGE('',*,*,#65630,.F.); +#65671 = PLANE('',#65672); +#65672 = AXIS2_PLACEMENT_3D('',#65673,#65674,#65675); +#65673 = CARTESIAN_POINT('',(-3.175,-12.525,0.8)); +#65674 = DIRECTION('',(0.,0.,1.)); +#65675 = DIRECTION('',(0.,1.,0.)); +#65676 = ADVANCED_FACE('',(#65677),#65683,.T.); +#65677 = FACE_BOUND('',#65678,.T.); +#65678 = EDGE_LOOP('',(#65679,#65680,#65681,#65682)); +#65679 = ORIENTED_EDGE('',*,*,#65487,.T.); +#65680 = ORIENTED_EDGE('',*,*,#65535,.T.); +#65681 = ORIENTED_EDGE('',*,*,#65511,.F.); +#65682 = ORIENTED_EDGE('',*,*,#65550,.F.); +#65683 = PLANE('',#65684); +#65684 = AXIS2_PLACEMENT_3D('',#65685,#65686,#65687); +#65685 = CARTESIAN_POINT('',(-2.725,-12.3,0.)); +#65686 = DIRECTION('',(1.,0.,0.)); +#65687 = DIRECTION('',(0.,0.,1.)); +#65688 = ADVANCED_FACE('',(#65689),#65700,.T.); +#65689 = FACE_BOUND('',#65690,.T.); +#65690 = EDGE_LOOP('',(#65691,#65692,#65693,#65699)); +#65691 = ORIENTED_EDGE('',*,*,#65638,.T.); +#65692 = ORIENTED_EDGE('',*,*,#65665,.T.); +#65693 = ORIENTED_EDGE('',*,*,#65694,.F.); +#65694 = EDGE_CURVE('',#65557,#65658,#65695,.T.); +#65695 = LINE('',#65696,#65697); +#65696 = CARTESIAN_POINT('',(-2.725,-12.75,0.4)); +#65697 = VECTOR('',#65698,1.); +#65698 = DIRECTION('',(0.,0.,1.)); +#65699 = ORIENTED_EDGE('',*,*,#65556,.F.); +#65700 = PLANE('',#65701); +#65701 = AXIS2_PLACEMENT_3D('',#65702,#65703,#65704); +#65702 = CARTESIAN_POINT('',(-2.725,-12.3,0.4)); +#65703 = DIRECTION('',(1.,0.,0.)); +#65704 = DIRECTION('',(0.,-1.,0.)); +#65705 = ADVANCED_FACE('',(#65706),#65712,.F.); +#65706 = FACE_BOUND('',#65707,.F.); +#65707 = EDGE_LOOP('',(#65708,#65709,#65710,#65711)); +#65708 = ORIENTED_EDGE('',*,*,#65588,.F.); +#65709 = ORIENTED_EDGE('',*,*,#65613,.T.); +#65710 = ORIENTED_EDGE('',*,*,#65657,.T.); +#65711 = ORIENTED_EDGE('',*,*,#65694,.F.); +#65712 = PLANE('',#65713); +#65713 = AXIS2_PLACEMENT_3D('',#65714,#65715,#65716); +#65714 = CARTESIAN_POINT('',(-3.625,-12.75,0.4)); +#65715 = DIRECTION('',(0.,1.,0.)); +#65716 = DIRECTION('',(1.,0.,0.)); +#65717 = MANIFOLD_SOLID_BREP('',#65718); +#65718 = CLOSED_SHELL('',(#65719,#65759,#65790,#65821,#65871,#65902, + #65935,#65952,#65976,#66007,#66024,#66053,#66077,#66103,#66127, + #66154,#66166,#66183)); +#65719 = ADVANCED_FACE('',(#65720),#65754,.T.); +#65720 = FACE_BOUND('',#65721,.T.); +#65721 = EDGE_LOOP('',(#65722,#65732,#65740,#65748)); +#65722 = ORIENTED_EDGE('',*,*,#65723,.T.); +#65723 = EDGE_CURVE('',#65724,#65726,#65728,.T.); +#65724 = VERTEX_POINT('',#65725); +#65725 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65726 = VERTEX_POINT('',#65727); +#65727 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65728 = LINE('',#65729,#65730); +#65729 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65730 = VECTOR('',#65731,1.); +#65731 = DIRECTION('',(0.,0.,1.)); +#65732 = ORIENTED_EDGE('',*,*,#65733,.T.); +#65733 = EDGE_CURVE('',#65726,#65734,#65736,.T.); +#65734 = VERTEX_POINT('',#65735); +#65735 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#65736 = LINE('',#65737,#65738); +#65737 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65738 = VECTOR('',#65739,1.); +#65739 = DIRECTION('',(0.,1.,0.)); +#65740 = ORIENTED_EDGE('',*,*,#65741,.F.); +#65741 = EDGE_CURVE('',#65742,#65734,#65744,.T.); +#65742 = VERTEX_POINT('',#65743); +#65743 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65744 = LINE('',#65745,#65746); +#65745 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65746 = VECTOR('',#65747,1.); +#65747 = DIRECTION('',(0.,0.,1.)); +#65748 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65749 = EDGE_CURVE('',#65724,#65742,#65750,.T.); +#65750 = LINE('',#65751,#65752); +#65751 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65752 = VECTOR('',#65753,1.); +#65753 = DIRECTION('',(0.,1.,0.)); +#65754 = PLANE('',#65755); +#65755 = AXIS2_PLACEMENT_3D('',#65756,#65757,#65758); +#65756 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65757 = DIRECTION('',(-1.,0.,0.)); +#65758 = DIRECTION('',(0.,1.,0.)); +#65759 = ADVANCED_FACE('',(#65760),#65785,.F.); +#65760 = FACE_BOUND('',#65761,.F.); +#65761 = EDGE_LOOP('',(#65762,#65770,#65771,#65779)); +#65762 = ORIENTED_EDGE('',*,*,#65763,.F.); +#65763 = EDGE_CURVE('',#65724,#65764,#65766,.T.); +#65764 = VERTEX_POINT('',#65765); +#65765 = CARTESIAN_POINT('',(-2.18,-12.75,0.)); +#65766 = LINE('',#65767,#65768); +#65767 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65768 = VECTOR('',#65769,1.); +#65769 = DIRECTION('',(1.,0.,0.)); +#65770 = ORIENTED_EDGE('',*,*,#65723,.T.); +#65771 = ORIENTED_EDGE('',*,*,#65772,.T.); +#65772 = EDGE_CURVE('',#65726,#65773,#65775,.T.); +#65773 = VERTEX_POINT('',#65774); +#65774 = CARTESIAN_POINT('',(-2.18,-12.75,0.4)); +#65775 = LINE('',#65776,#65777); +#65776 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65777 = VECTOR('',#65778,1.); +#65778 = DIRECTION('',(1.,0.,0.)); +#65779 = ORIENTED_EDGE('',*,*,#65780,.F.); +#65780 = EDGE_CURVE('',#65764,#65773,#65781,.T.); +#65781 = LINE('',#65782,#65783); +#65782 = CARTESIAN_POINT('',(-2.18,-12.75,0.8)); +#65783 = VECTOR('',#65784,1.); +#65784 = DIRECTION('',(0.,0.,1.)); +#65785 = PLANE('',#65786); +#65786 = AXIS2_PLACEMENT_3D('',#65787,#65788,#65789); +#65787 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65788 = DIRECTION('',(0.,1.,0.)); +#65789 = DIRECTION('',(1.,0.,0.)); +#65790 = ADVANCED_FACE('',(#65791),#65816,.F.); +#65791 = FACE_BOUND('',#65792,.F.); +#65792 = EDGE_LOOP('',(#65793,#65801,#65809,#65815)); +#65793 = ORIENTED_EDGE('',*,*,#65794,.T.); +#65794 = EDGE_CURVE('',#65742,#65795,#65797,.T.); +#65795 = VERTEX_POINT('',#65796); +#65796 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#65797 = LINE('',#65798,#65799); +#65798 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65799 = VECTOR('',#65800,1.); +#65800 = DIRECTION('',(0.,1.,0.)); +#65801 = ORIENTED_EDGE('',*,*,#65802,.T.); +#65802 = EDGE_CURVE('',#65795,#65803,#65805,.T.); +#65803 = VERTEX_POINT('',#65804); +#65804 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#65805 = LINE('',#65806,#65807); +#65806 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#65807 = VECTOR('',#65808,1.); +#65808 = DIRECTION('',(0.,0.,1.)); +#65809 = ORIENTED_EDGE('',*,*,#65810,.F.); +#65810 = EDGE_CURVE('',#65734,#65803,#65811,.T.); +#65811 = LINE('',#65812,#65813); +#65812 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#65813 = VECTOR('',#65814,1.); +#65814 = DIRECTION('',(0.,1.,0.)); +#65815 = ORIENTED_EDGE('',*,*,#65741,.F.); +#65816 = PLANE('',#65817); +#65817 = AXIS2_PLACEMENT_3D('',#65818,#65819,#65820); +#65818 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65819 = DIRECTION('',(1.,0.,0.)); +#65820 = DIRECTION('',(0.,0.,1.)); +#65821 = ADVANCED_FACE('',(#65822),#65866,.F.); +#65822 = FACE_BOUND('',#65823,.F.); +#65823 = EDGE_LOOP('',(#65824,#65825,#65826,#65835,#65844,#65852,#65860) + ); +#65824 = ORIENTED_EDGE('',*,*,#65749,.F.); +#65825 = ORIENTED_EDGE('',*,*,#65763,.T.); +#65826 = ORIENTED_EDGE('',*,*,#65827,.F.); +#65827 = EDGE_CURVE('',#65828,#65764,#65830,.T.); +#65828 = VERTEX_POINT('',#65829); +#65829 = CARTESIAN_POINT('',(-1.905,-12.475,0.)); +#65830 = CIRCLE('',#65831,0.275); +#65831 = AXIS2_PLACEMENT_3D('',#65832,#65833,#65834); +#65832 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#65833 = DIRECTION('',(0.,-0.,1.)); +#65834 = DIRECTION('',(0.,1.,0.)); +#65835 = ORIENTED_EDGE('',*,*,#65836,.F.); +#65836 = EDGE_CURVE('',#65837,#65828,#65839,.T.); +#65837 = VERTEX_POINT('',#65838); +#65838 = CARTESIAN_POINT('',(-1.63,-12.75,0.)); +#65839 = CIRCLE('',#65840,0.275); +#65840 = AXIS2_PLACEMENT_3D('',#65841,#65842,#65843); +#65841 = CARTESIAN_POINT('',(-1.905,-12.75,0.)); +#65842 = DIRECTION('',(0.,-0.,1.)); +#65843 = DIRECTION('',(0.,1.,0.)); +#65844 = ORIENTED_EDGE('',*,*,#65845,.T.); +#65845 = EDGE_CURVE('',#65837,#65846,#65848,.T.); +#65846 = VERTEX_POINT('',#65847); +#65847 = CARTESIAN_POINT('',(-1.455,-12.75,0.)); +#65848 = LINE('',#65849,#65850); +#65849 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#65850 = VECTOR('',#65851,1.); +#65851 = DIRECTION('',(1.,0.,0.)); +#65852 = ORIENTED_EDGE('',*,*,#65853,.F.); +#65853 = EDGE_CURVE('',#65854,#65846,#65856,.T.); +#65854 = VERTEX_POINT('',#65855); +#65855 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#65856 = LINE('',#65857,#65858); +#65857 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#65858 = VECTOR('',#65859,1.); +#65859 = DIRECTION('',(0.,-1.,0.)); +#65860 = ORIENTED_EDGE('',*,*,#65861,.F.); +#65861 = EDGE_CURVE('',#65742,#65854,#65862,.T.); +#65862 = LINE('',#65863,#65864); +#65863 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65864 = VECTOR('',#65865,1.); +#65865 = DIRECTION('',(1.,0.,0.)); +#65866 = PLANE('',#65867); +#65867 = AXIS2_PLACEMENT_3D('',#65868,#65869,#65870); +#65868 = CARTESIAN_POINT('',(-1.905,-12.525,0.)); +#65869 = DIRECTION('',(0.,0.,1.)); +#65870 = DIRECTION('',(0.,1.,0.)); +#65871 = ADVANCED_FACE('',(#65872),#65897,.T.); +#65872 = FACE_BOUND('',#65873,.T.); +#65873 = EDGE_LOOP('',(#65874,#65882,#65890,#65896)); +#65874 = ORIENTED_EDGE('',*,*,#65875,.T.); +#65875 = EDGE_CURVE('',#65726,#65876,#65878,.T.); +#65876 = VERTEX_POINT('',#65877); +#65877 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#65878 = LINE('',#65879,#65880); +#65879 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65880 = VECTOR('',#65881,1.); +#65881 = DIRECTION('',(0.,0.,1.)); +#65882 = ORIENTED_EDGE('',*,*,#65883,.T.); +#65883 = EDGE_CURVE('',#65876,#65884,#65886,.T.); +#65884 = VERTEX_POINT('',#65885); +#65885 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#65886 = LINE('',#65887,#65888); +#65887 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#65888 = VECTOR('',#65889,1.); +#65889 = DIRECTION('',(0.,1.,0.)); +#65890 = ORIENTED_EDGE('',*,*,#65891,.F.); +#65891 = EDGE_CURVE('',#65734,#65884,#65892,.T.); +#65892 = LINE('',#65893,#65894); +#65893 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#65894 = VECTOR('',#65895,1.); +#65895 = DIRECTION('',(0.,0.,1.)); +#65896 = ORIENTED_EDGE('',*,*,#65733,.F.); +#65897 = PLANE('',#65898); +#65898 = AXIS2_PLACEMENT_3D('',#65899,#65900,#65901); +#65899 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65900 = DIRECTION('',(-1.,0.,0.)); +#65901 = DIRECTION('',(0.,1.,0.)); +#65902 = ADVANCED_FACE('',(#65903),#65930,.F.); +#65903 = FACE_BOUND('',#65904,.F.); +#65904 = EDGE_LOOP('',(#65905,#65916,#65922,#65923,#65924)); +#65905 = ORIENTED_EDGE('',*,*,#65906,.F.); +#65906 = EDGE_CURVE('',#65907,#65909,#65911,.T.); +#65907 = VERTEX_POINT('',#65908); +#65908 = CARTESIAN_POINT('',(-1.905,-12.475,0.8)); +#65909 = VERTEX_POINT('',#65910); +#65910 = CARTESIAN_POINT('',(-2.18,-12.75,0.8)); +#65911 = CIRCLE('',#65912,0.275); +#65912 = AXIS2_PLACEMENT_3D('',#65913,#65914,#65915); +#65913 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#65914 = DIRECTION('',(0.,-0.,1.)); +#65915 = DIRECTION('',(0.,1.,0.)); +#65916 = ORIENTED_EDGE('',*,*,#65917,.T.); +#65917 = EDGE_CURVE('',#65907,#65828,#65918,.T.); +#65918 = LINE('',#65919,#65920); +#65919 = CARTESIAN_POINT('',(-1.905,-12.475,0.8)); +#65920 = VECTOR('',#65921,1.); +#65921 = DIRECTION('',(0.,-0.,-1.)); +#65922 = ORIENTED_EDGE('',*,*,#65827,.T.); +#65923 = ORIENTED_EDGE('',*,*,#65780,.T.); +#65924 = ORIENTED_EDGE('',*,*,#65925,.T.); +#65925 = EDGE_CURVE('',#65773,#65909,#65926,.T.); +#65926 = LINE('',#65927,#65928); +#65927 = CARTESIAN_POINT('',(-2.18,-12.75,0.8)); +#65928 = VECTOR('',#65929,1.); +#65929 = DIRECTION('',(0.,0.,1.)); +#65930 = CYLINDRICAL_SURFACE('',#65931,0.275); +#65931 = AXIS2_PLACEMENT_3D('',#65932,#65933,#65934); +#65932 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#65933 = DIRECTION('',(0.,0.,1.)); +#65934 = DIRECTION('',(0.,1.,0.)); +#65935 = ADVANCED_FACE('',(#65936),#65947,.F.); +#65936 = FACE_BOUND('',#65937,.F.); +#65937 = EDGE_LOOP('',(#65938,#65939,#65940,#65946)); +#65938 = ORIENTED_EDGE('',*,*,#65772,.F.); +#65939 = ORIENTED_EDGE('',*,*,#65875,.T.); +#65940 = ORIENTED_EDGE('',*,*,#65941,.T.); +#65941 = EDGE_CURVE('',#65876,#65909,#65942,.T.); +#65942 = LINE('',#65943,#65944); +#65943 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#65944 = VECTOR('',#65945,1.); +#65945 = DIRECTION('',(1.,0.,0.)); +#65946 = ORIENTED_EDGE('',*,*,#65925,.F.); +#65947 = PLANE('',#65948); +#65948 = AXIS2_PLACEMENT_3D('',#65949,#65950,#65951); +#65949 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#65950 = DIRECTION('',(0.,1.,0.)); +#65951 = DIRECTION('',(1.,0.,0.)); +#65952 = ADVANCED_FACE('',(#65953),#65971,.T.); +#65953 = FACE_BOUND('',#65954,.T.); +#65954 = EDGE_LOOP('',(#65955,#65956,#65964,#65970)); +#65955 = ORIENTED_EDGE('',*,*,#65794,.T.); +#65956 = ORIENTED_EDGE('',*,*,#65957,.T.); +#65957 = EDGE_CURVE('',#65795,#65958,#65960,.T.); +#65958 = VERTEX_POINT('',#65959); +#65959 = CARTESIAN_POINT('',(-1.455,-11.9,0.)); +#65960 = LINE('',#65961,#65962); +#65961 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#65962 = VECTOR('',#65963,1.); +#65963 = DIRECTION('',(1.,0.,0.)); +#65964 = ORIENTED_EDGE('',*,*,#65965,.F.); +#65965 = EDGE_CURVE('',#65854,#65958,#65966,.T.); +#65966 = LINE('',#65967,#65968); +#65967 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#65968 = VECTOR('',#65969,1.); +#65969 = DIRECTION('',(0.,1.,0.)); +#65970 = ORIENTED_EDGE('',*,*,#65861,.F.); +#65971 = PLANE('',#65972); +#65972 = AXIS2_PLACEMENT_3D('',#65973,#65974,#65975); +#65973 = CARTESIAN_POINT('',(-2.355,-12.3,0.)); +#65974 = DIRECTION('',(0.,0.,-1.)); +#65975 = DIRECTION('',(1.,0.,0.)); +#65976 = ADVANCED_FACE('',(#65977),#66002,.F.); +#65977 = FACE_BOUND('',#65978,.F.); +#65978 = EDGE_LOOP('',(#65979,#65980,#65988,#65996)); +#65979 = ORIENTED_EDGE('',*,*,#65810,.T.); +#65980 = ORIENTED_EDGE('',*,*,#65981,.T.); +#65981 = EDGE_CURVE('',#65803,#65982,#65984,.T.); +#65982 = VERTEX_POINT('',#65983); +#65983 = CARTESIAN_POINT('',(-1.455,-11.9,0.4)); +#65984 = LINE('',#65985,#65986); +#65985 = CARTESIAN_POINT('',(-2.355,-11.9,0.4)); +#65986 = VECTOR('',#65987,1.); +#65987 = DIRECTION('',(1.,0.,0.)); +#65988 = ORIENTED_EDGE('',*,*,#65989,.F.); +#65989 = EDGE_CURVE('',#65990,#65982,#65992,.T.); +#65990 = VERTEX_POINT('',#65991); +#65991 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#65992 = LINE('',#65993,#65994); +#65993 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#65994 = VECTOR('',#65995,1.); +#65995 = DIRECTION('',(0.,1.,0.)); +#65996 = ORIENTED_EDGE('',*,*,#65997,.F.); +#65997 = EDGE_CURVE('',#65734,#65990,#65998,.T.); +#65998 = LINE('',#65999,#66000); +#65999 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#66000 = VECTOR('',#66001,1.); +#66001 = DIRECTION('',(1.,0.,0.)); +#66002 = PLANE('',#66003); +#66003 = AXIS2_PLACEMENT_3D('',#66004,#66005,#66006); +#66004 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#66005 = DIRECTION('',(0.,0.,-1.)); +#66006 = DIRECTION('',(1.,0.,0.)); +#66007 = ADVANCED_FACE('',(#66008),#66019,.T.); +#66008 = FACE_BOUND('',#66009,.T.); +#66009 = EDGE_LOOP('',(#66010,#66011,#66012,#66018)); +#66010 = ORIENTED_EDGE('',*,*,#65802,.T.); +#66011 = ORIENTED_EDGE('',*,*,#65981,.T.); +#66012 = ORIENTED_EDGE('',*,*,#66013,.F.); +#66013 = EDGE_CURVE('',#65958,#65982,#66014,.T.); +#66014 = LINE('',#66015,#66016); +#66015 = CARTESIAN_POINT('',(-1.455,-11.9,0.)); +#66016 = VECTOR('',#66017,1.); +#66017 = DIRECTION('',(0.,0.,1.)); +#66018 = ORIENTED_EDGE('',*,*,#65957,.F.); +#66019 = PLANE('',#66020); +#66020 = AXIS2_PLACEMENT_3D('',#66021,#66022,#66023); +#66021 = CARTESIAN_POINT('',(-2.355,-11.9,0.)); +#66022 = DIRECTION('',(0.,1.,0.)); +#66023 = DIRECTION('',(1.,0.,0.)); +#66024 = ADVANCED_FACE('',(#66025),#66048,.T.); +#66025 = FACE_BOUND('',#66026,.T.); +#66026 = EDGE_LOOP('',(#66027,#66033,#66041,#66047)); +#66027 = ORIENTED_EDGE('',*,*,#66028,.T.); +#66028 = EDGE_CURVE('',#65854,#65990,#66029,.T.); +#66029 = LINE('',#66030,#66031); +#66030 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#66031 = VECTOR('',#66032,1.); +#66032 = DIRECTION('',(0.,0.,1.)); +#66033 = ORIENTED_EDGE('',*,*,#66034,.T.); +#66034 = EDGE_CURVE('',#65990,#66035,#66037,.T.); +#66035 = VERTEX_POINT('',#66036); +#66036 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#66037 = LINE('',#66038,#66039); +#66038 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#66039 = VECTOR('',#66040,1.); +#66040 = DIRECTION('',(0.,-1.,0.)); +#66041 = ORIENTED_EDGE('',*,*,#66042,.F.); +#66042 = EDGE_CURVE('',#65846,#66035,#66043,.T.); +#66043 = LINE('',#66044,#66045); +#66044 = CARTESIAN_POINT('',(-1.455,-12.75,0.)); +#66045 = VECTOR('',#66046,1.); +#66046 = DIRECTION('',(0.,0.,1.)); +#66047 = ORIENTED_EDGE('',*,*,#65853,.F.); +#66048 = PLANE('',#66049); +#66049 = AXIS2_PLACEMENT_3D('',#66050,#66051,#66052); +#66050 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#66051 = DIRECTION('',(1.,0.,0.)); +#66052 = DIRECTION('',(0.,-1.,0.)); +#66053 = ADVANCED_FACE('',(#66054),#66072,.F.); +#66054 = FACE_BOUND('',#66055,.F.); +#66055 = EDGE_LOOP('',(#66056,#66057,#66065,#66071)); +#66056 = ORIENTED_EDGE('',*,*,#65845,.F.); +#66057 = ORIENTED_EDGE('',*,*,#66058,.T.); +#66058 = EDGE_CURVE('',#65837,#66059,#66061,.T.); +#66059 = VERTEX_POINT('',#66060); +#66060 = CARTESIAN_POINT('',(-1.63,-12.75,0.4)); +#66061 = LINE('',#66062,#66063); +#66062 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#66063 = VECTOR('',#66064,1.); +#66064 = DIRECTION('',(0.,0.,1.)); +#66065 = ORIENTED_EDGE('',*,*,#66066,.T.); +#66066 = EDGE_CURVE('',#66059,#66035,#66067,.T.); +#66067 = LINE('',#66068,#66069); +#66068 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#66069 = VECTOR('',#66070,1.); +#66070 = DIRECTION('',(1.,0.,0.)); +#66071 = ORIENTED_EDGE('',*,*,#66042,.F.); +#66072 = PLANE('',#66073); +#66073 = AXIS2_PLACEMENT_3D('',#66074,#66075,#66076); +#66074 = CARTESIAN_POINT('',(-2.355,-12.75,0.)); +#66075 = DIRECTION('',(0.,1.,0.)); +#66076 = DIRECTION('',(1.,0.,0.)); +#66077 = ADVANCED_FACE('',(#66078),#66098,.F.); +#66078 = FACE_BOUND('',#66079,.F.); +#66079 = EDGE_LOOP('',(#66080,#66081,#66090,#66096,#66097)); +#66080 = ORIENTED_EDGE('',*,*,#65917,.F.); +#66081 = ORIENTED_EDGE('',*,*,#66082,.F.); +#66082 = EDGE_CURVE('',#66083,#65907,#66085,.T.); +#66083 = VERTEX_POINT('',#66084); +#66084 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#66085 = CIRCLE('',#66086,0.275); +#66086 = AXIS2_PLACEMENT_3D('',#66087,#66088,#66089); +#66087 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#66088 = DIRECTION('',(0.,-0.,1.)); +#66089 = DIRECTION('',(0.,1.,0.)); +#66090 = ORIENTED_EDGE('',*,*,#66091,.F.); +#66091 = EDGE_CURVE('',#66059,#66083,#66092,.T.); +#66092 = LINE('',#66093,#66094); +#66093 = CARTESIAN_POINT('',(-1.63,-12.75,0.8)); +#66094 = VECTOR('',#66095,1.); +#66095 = DIRECTION('',(0.,0.,1.)); +#66096 = ORIENTED_EDGE('',*,*,#66058,.F.); +#66097 = ORIENTED_EDGE('',*,*,#65836,.T.); +#66098 = CYLINDRICAL_SURFACE('',#66099,0.275); +#66099 = AXIS2_PLACEMENT_3D('',#66100,#66101,#66102); +#66100 = CARTESIAN_POINT('',(-1.905,-12.75,0.8)); +#66101 = DIRECTION('',(0.,0.,1.)); +#66102 = DIRECTION('',(0.,1.,0.)); +#66103 = ADVANCED_FACE('',(#66104),#66122,.T.); +#66104 = FACE_BOUND('',#66105,.T.); +#66105 = EDGE_LOOP('',(#66106,#66107,#66115,#66121)); +#66106 = ORIENTED_EDGE('',*,*,#65891,.T.); +#66107 = ORIENTED_EDGE('',*,*,#66108,.T.); +#66108 = EDGE_CURVE('',#65884,#66109,#66111,.T.); +#66109 = VERTEX_POINT('',#66110); +#66110 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#66111 = LINE('',#66112,#66113); +#66112 = CARTESIAN_POINT('',(-2.355,-12.3,0.8)); +#66113 = VECTOR('',#66114,1.); +#66114 = DIRECTION('',(1.,0.,0.)); +#66115 = ORIENTED_EDGE('',*,*,#66116,.F.); +#66116 = EDGE_CURVE('',#65990,#66109,#66117,.T.); +#66117 = LINE('',#66118,#66119); +#66118 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#66119 = VECTOR('',#66120,1.); +#66120 = DIRECTION('',(0.,0.,1.)); +#66121 = ORIENTED_EDGE('',*,*,#65997,.F.); +#66122 = PLANE('',#66123); +#66123 = AXIS2_PLACEMENT_3D('',#66124,#66125,#66126); +#66124 = CARTESIAN_POINT('',(-2.355,-12.3,0.4)); +#66125 = DIRECTION('',(0.,1.,0.)); +#66126 = DIRECTION('',(1.,0.,0.)); +#66127 = ADVANCED_FACE('',(#66128),#66149,.T.); +#66128 = FACE_BOUND('',#66129,.T.); +#66129 = EDGE_LOOP('',(#66130,#66131,#66132,#66133,#66134,#66142,#66148) + ); +#66130 = ORIENTED_EDGE('',*,*,#65883,.F.); +#66131 = ORIENTED_EDGE('',*,*,#65941,.T.); +#66132 = ORIENTED_EDGE('',*,*,#65906,.F.); +#66133 = ORIENTED_EDGE('',*,*,#66082,.F.); +#66134 = ORIENTED_EDGE('',*,*,#66135,.T.); +#66135 = EDGE_CURVE('',#66083,#66136,#66138,.T.); +#66136 = VERTEX_POINT('',#66137); +#66137 = CARTESIAN_POINT('',(-1.455,-12.75,0.8)); +#66138 = LINE('',#66139,#66140); +#66139 = CARTESIAN_POINT('',(-2.355,-12.75,0.8)); +#66140 = VECTOR('',#66141,1.); +#66141 = DIRECTION('',(1.,0.,0.)); +#66142 = ORIENTED_EDGE('',*,*,#66143,.F.); +#66143 = EDGE_CURVE('',#66109,#66136,#66144,.T.); +#66144 = LINE('',#66145,#66146); +#66145 = CARTESIAN_POINT('',(-1.455,-12.3,0.8)); +#66146 = VECTOR('',#66147,1.); +#66147 = DIRECTION('',(0.,-1.,0.)); +#66148 = ORIENTED_EDGE('',*,*,#66108,.F.); +#66149 = PLANE('',#66150); +#66150 = AXIS2_PLACEMENT_3D('',#66151,#66152,#66153); +#66151 = CARTESIAN_POINT('',(-1.905,-12.525,0.8)); +#66152 = DIRECTION('',(0.,0.,1.)); +#66153 = DIRECTION('',(0.,1.,0.)); +#66154 = ADVANCED_FACE('',(#66155),#66161,.T.); +#66155 = FACE_BOUND('',#66156,.T.); +#66156 = EDGE_LOOP('',(#66157,#66158,#66159,#66160)); +#66157 = ORIENTED_EDGE('',*,*,#65965,.T.); +#66158 = ORIENTED_EDGE('',*,*,#66013,.T.); +#66159 = ORIENTED_EDGE('',*,*,#65989,.F.); +#66160 = ORIENTED_EDGE('',*,*,#66028,.F.); +#66161 = PLANE('',#66162); +#66162 = AXIS2_PLACEMENT_3D('',#66163,#66164,#66165); +#66163 = CARTESIAN_POINT('',(-1.455,-12.3,0.)); +#66164 = DIRECTION('',(1.,0.,0.)); +#66165 = DIRECTION('',(0.,0.,1.)); +#66166 = ADVANCED_FACE('',(#66167),#66178,.T.); +#66167 = FACE_BOUND('',#66168,.T.); +#66168 = EDGE_LOOP('',(#66169,#66170,#66171,#66177)); +#66169 = ORIENTED_EDGE('',*,*,#66116,.T.); +#66170 = ORIENTED_EDGE('',*,*,#66143,.T.); +#66171 = ORIENTED_EDGE('',*,*,#66172,.F.); +#66172 = EDGE_CURVE('',#66035,#66136,#66173,.T.); +#66173 = LINE('',#66174,#66175); +#66174 = CARTESIAN_POINT('',(-1.455,-12.75,0.4)); +#66175 = VECTOR('',#66176,1.); +#66176 = DIRECTION('',(0.,0.,1.)); +#66177 = ORIENTED_EDGE('',*,*,#66034,.F.); +#66178 = PLANE('',#66179); +#66179 = AXIS2_PLACEMENT_3D('',#66180,#66181,#66182); +#66180 = CARTESIAN_POINT('',(-1.455,-12.3,0.4)); +#66181 = DIRECTION('',(1.,0.,0.)); +#66182 = DIRECTION('',(0.,-1.,0.)); +#66183 = ADVANCED_FACE('',(#66184),#66190,.F.); +#66184 = FACE_BOUND('',#66185,.F.); +#66185 = EDGE_LOOP('',(#66186,#66187,#66188,#66189)); +#66186 = ORIENTED_EDGE('',*,*,#66066,.F.); +#66187 = ORIENTED_EDGE('',*,*,#66091,.T.); +#66188 = ORIENTED_EDGE('',*,*,#66135,.T.); +#66189 = ORIENTED_EDGE('',*,*,#66172,.F.); +#66190 = PLANE('',#66191); +#66191 = AXIS2_PLACEMENT_3D('',#66192,#66193,#66194); +#66192 = CARTESIAN_POINT('',(-2.355,-12.75,0.4)); +#66193 = DIRECTION('',(0.,1.,0.)); +#66194 = DIRECTION('',(1.,0.,0.)); +#66195 = MANIFOLD_SOLID_BREP('',#66196); +#66196 = CLOSED_SHELL('',(#66197,#66237,#66268,#66299,#66349,#66380, + #66413,#66430,#66454,#66485,#66502,#66531,#66555,#66581,#66605, + #66632,#66644,#66661)); +#66197 = ADVANCED_FACE('',(#66198),#66232,.T.); +#66198 = FACE_BOUND('',#66199,.T.); +#66199 = EDGE_LOOP('',(#66200,#66210,#66218,#66226)); +#66200 = ORIENTED_EDGE('',*,*,#66201,.T.); +#66201 = EDGE_CURVE('',#66202,#66204,#66206,.T.); +#66202 = VERTEX_POINT('',#66203); +#66203 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66204 = VERTEX_POINT('',#66205); +#66205 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66206 = LINE('',#66207,#66208); +#66207 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66208 = VECTOR('',#66209,1.); +#66209 = DIRECTION('',(0.,0.,1.)); +#66210 = ORIENTED_EDGE('',*,*,#66211,.T.); +#66211 = EDGE_CURVE('',#66204,#66212,#66214,.T.); +#66212 = VERTEX_POINT('',#66213); +#66213 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66214 = LINE('',#66215,#66216); +#66215 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66216 = VECTOR('',#66217,1.); +#66217 = DIRECTION('',(0.,1.,0.)); +#66218 = ORIENTED_EDGE('',*,*,#66219,.F.); +#66219 = EDGE_CURVE('',#66220,#66212,#66222,.T.); +#66220 = VERTEX_POINT('',#66221); +#66221 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66222 = LINE('',#66223,#66224); +#66223 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66224 = VECTOR('',#66225,1.); +#66225 = DIRECTION('',(0.,0.,1.)); +#66226 = ORIENTED_EDGE('',*,*,#66227,.F.); +#66227 = EDGE_CURVE('',#66202,#66220,#66228,.T.); +#66228 = LINE('',#66229,#66230); +#66229 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66230 = VECTOR('',#66231,1.); +#66231 = DIRECTION('',(0.,1.,0.)); +#66232 = PLANE('',#66233); +#66233 = AXIS2_PLACEMENT_3D('',#66234,#66235,#66236); +#66234 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66235 = DIRECTION('',(-1.,0.,0.)); +#66236 = DIRECTION('',(0.,1.,0.)); +#66237 = ADVANCED_FACE('',(#66238),#66263,.F.); +#66238 = FACE_BOUND('',#66239,.F.); +#66239 = EDGE_LOOP('',(#66240,#66248,#66249,#66257)); +#66240 = ORIENTED_EDGE('',*,*,#66241,.F.); +#66241 = EDGE_CURVE('',#66202,#66242,#66244,.T.); +#66242 = VERTEX_POINT('',#66243); +#66243 = CARTESIAN_POINT('',(-0.91,-12.75,0.)); +#66244 = LINE('',#66245,#66246); +#66245 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66246 = VECTOR('',#66247,1.); +#66247 = DIRECTION('',(1.,0.,0.)); +#66248 = ORIENTED_EDGE('',*,*,#66201,.T.); +#66249 = ORIENTED_EDGE('',*,*,#66250,.T.); +#66250 = EDGE_CURVE('',#66204,#66251,#66253,.T.); +#66251 = VERTEX_POINT('',#66252); +#66252 = CARTESIAN_POINT('',(-0.91,-12.75,0.4)); +#66253 = LINE('',#66254,#66255); +#66254 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66255 = VECTOR('',#66256,1.); +#66256 = DIRECTION('',(1.,0.,0.)); +#66257 = ORIENTED_EDGE('',*,*,#66258,.F.); +#66258 = EDGE_CURVE('',#66242,#66251,#66259,.T.); +#66259 = LINE('',#66260,#66261); +#66260 = CARTESIAN_POINT('',(-0.91,-12.75,0.8)); +#66261 = VECTOR('',#66262,1.); +#66262 = DIRECTION('',(0.,0.,1.)); +#66263 = PLANE('',#66264); +#66264 = AXIS2_PLACEMENT_3D('',#66265,#66266,#66267); +#66265 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66266 = DIRECTION('',(0.,1.,0.)); +#66267 = DIRECTION('',(1.,0.,0.)); +#66268 = ADVANCED_FACE('',(#66269),#66294,.F.); +#66269 = FACE_BOUND('',#66270,.F.); +#66270 = EDGE_LOOP('',(#66271,#66279,#66287,#66293)); +#66271 = ORIENTED_EDGE('',*,*,#66272,.T.); +#66272 = EDGE_CURVE('',#66220,#66273,#66275,.T.); +#66273 = VERTEX_POINT('',#66274); +#66274 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#66275 = LINE('',#66276,#66277); +#66276 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66277 = VECTOR('',#66278,1.); +#66278 = DIRECTION('',(0.,1.,0.)); +#66279 = ORIENTED_EDGE('',*,*,#66280,.T.); +#66280 = EDGE_CURVE('',#66273,#66281,#66283,.T.); +#66281 = VERTEX_POINT('',#66282); +#66282 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#66283 = LINE('',#66284,#66285); +#66284 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#66285 = VECTOR('',#66286,1.); +#66286 = DIRECTION('',(0.,0.,1.)); +#66287 = ORIENTED_EDGE('',*,*,#66288,.F.); +#66288 = EDGE_CURVE('',#66212,#66281,#66289,.T.); +#66289 = LINE('',#66290,#66291); +#66290 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66291 = VECTOR('',#66292,1.); +#66292 = DIRECTION('',(0.,1.,0.)); +#66293 = ORIENTED_EDGE('',*,*,#66219,.F.); +#66294 = PLANE('',#66295); +#66295 = AXIS2_PLACEMENT_3D('',#66296,#66297,#66298); +#66296 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66297 = DIRECTION('',(1.,0.,0.)); +#66298 = DIRECTION('',(0.,0.,1.)); +#66299 = ADVANCED_FACE('',(#66300),#66344,.F.); +#66300 = FACE_BOUND('',#66301,.F.); +#66301 = EDGE_LOOP('',(#66302,#66303,#66304,#66313,#66322,#66330,#66338) + ); +#66302 = ORIENTED_EDGE('',*,*,#66227,.F.); +#66303 = ORIENTED_EDGE('',*,*,#66241,.T.); +#66304 = ORIENTED_EDGE('',*,*,#66305,.F.); +#66305 = EDGE_CURVE('',#66306,#66242,#66308,.T.); +#66306 = VERTEX_POINT('',#66307); +#66307 = CARTESIAN_POINT('',(-0.635,-12.475,0.)); +#66308 = CIRCLE('',#66309,0.275); +#66309 = AXIS2_PLACEMENT_3D('',#66310,#66311,#66312); +#66310 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#66311 = DIRECTION('',(0.,-0.,1.)); +#66312 = DIRECTION('',(0.,1.,0.)); +#66313 = ORIENTED_EDGE('',*,*,#66314,.F.); +#66314 = EDGE_CURVE('',#66315,#66306,#66317,.T.); +#66315 = VERTEX_POINT('',#66316); +#66316 = CARTESIAN_POINT('',(-0.36,-12.75,0.)); +#66317 = CIRCLE('',#66318,0.275); +#66318 = AXIS2_PLACEMENT_3D('',#66319,#66320,#66321); +#66319 = CARTESIAN_POINT('',(-0.635,-12.75,0.)); +#66320 = DIRECTION('',(0.,-0.,1.)); +#66321 = DIRECTION('',(0.,1.,0.)); +#66322 = ORIENTED_EDGE('',*,*,#66323,.T.); +#66323 = EDGE_CURVE('',#66315,#66324,#66326,.T.); +#66324 = VERTEX_POINT('',#66325); +#66325 = CARTESIAN_POINT('',(-0.185,-12.75,0.)); +#66326 = LINE('',#66327,#66328); +#66327 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66328 = VECTOR('',#66329,1.); +#66329 = DIRECTION('',(1.,0.,0.)); +#66330 = ORIENTED_EDGE('',*,*,#66331,.F.); +#66331 = EDGE_CURVE('',#66332,#66324,#66334,.T.); +#66332 = VERTEX_POINT('',#66333); +#66333 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66334 = LINE('',#66335,#66336); +#66335 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66336 = VECTOR('',#66337,1.); +#66337 = DIRECTION('',(0.,-1.,0.)); +#66338 = ORIENTED_EDGE('',*,*,#66339,.F.); +#66339 = EDGE_CURVE('',#66220,#66332,#66340,.T.); +#66340 = LINE('',#66341,#66342); +#66341 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66342 = VECTOR('',#66343,1.); +#66343 = DIRECTION('',(1.,0.,0.)); +#66344 = PLANE('',#66345); +#66345 = AXIS2_PLACEMENT_3D('',#66346,#66347,#66348); +#66346 = CARTESIAN_POINT('',(-0.635,-12.525,0.)); +#66347 = DIRECTION('',(0.,0.,1.)); +#66348 = DIRECTION('',(0.,1.,0.)); +#66349 = ADVANCED_FACE('',(#66350),#66375,.T.); +#66350 = FACE_BOUND('',#66351,.T.); +#66351 = EDGE_LOOP('',(#66352,#66360,#66368,#66374)); +#66352 = ORIENTED_EDGE('',*,*,#66353,.T.); +#66353 = EDGE_CURVE('',#66204,#66354,#66356,.T.); +#66354 = VERTEX_POINT('',#66355); +#66355 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#66356 = LINE('',#66357,#66358); +#66357 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66358 = VECTOR('',#66359,1.); +#66359 = DIRECTION('',(0.,0.,1.)); +#66360 = ORIENTED_EDGE('',*,*,#66361,.T.); +#66361 = EDGE_CURVE('',#66354,#66362,#66364,.T.); +#66362 = VERTEX_POINT('',#66363); +#66363 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#66364 = LINE('',#66365,#66366); +#66365 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#66366 = VECTOR('',#66367,1.); +#66367 = DIRECTION('',(0.,1.,0.)); +#66368 = ORIENTED_EDGE('',*,*,#66369,.F.); +#66369 = EDGE_CURVE('',#66212,#66362,#66370,.T.); +#66370 = LINE('',#66371,#66372); +#66371 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66372 = VECTOR('',#66373,1.); +#66373 = DIRECTION('',(0.,0.,1.)); +#66374 = ORIENTED_EDGE('',*,*,#66211,.F.); +#66375 = PLANE('',#66376); +#66376 = AXIS2_PLACEMENT_3D('',#66377,#66378,#66379); +#66377 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66378 = DIRECTION('',(-1.,0.,0.)); +#66379 = DIRECTION('',(0.,1.,0.)); +#66380 = ADVANCED_FACE('',(#66381),#66408,.F.); +#66381 = FACE_BOUND('',#66382,.F.); +#66382 = EDGE_LOOP('',(#66383,#66394,#66400,#66401,#66402)); +#66383 = ORIENTED_EDGE('',*,*,#66384,.F.); +#66384 = EDGE_CURVE('',#66385,#66387,#66389,.T.); +#66385 = VERTEX_POINT('',#66386); +#66386 = CARTESIAN_POINT('',(-0.635,-12.475,0.8)); +#66387 = VERTEX_POINT('',#66388); +#66388 = CARTESIAN_POINT('',(-0.91,-12.75,0.8)); +#66389 = CIRCLE('',#66390,0.275); +#66390 = AXIS2_PLACEMENT_3D('',#66391,#66392,#66393); +#66391 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#66392 = DIRECTION('',(0.,-0.,1.)); +#66393 = DIRECTION('',(0.,1.,0.)); +#66394 = ORIENTED_EDGE('',*,*,#66395,.T.); +#66395 = EDGE_CURVE('',#66385,#66306,#66396,.T.); +#66396 = LINE('',#66397,#66398); +#66397 = CARTESIAN_POINT('',(-0.635,-12.475,0.8)); +#66398 = VECTOR('',#66399,1.); +#66399 = DIRECTION('',(0.,-0.,-1.)); +#66400 = ORIENTED_EDGE('',*,*,#66305,.T.); +#66401 = ORIENTED_EDGE('',*,*,#66258,.T.); +#66402 = ORIENTED_EDGE('',*,*,#66403,.T.); +#66403 = EDGE_CURVE('',#66251,#66387,#66404,.T.); +#66404 = LINE('',#66405,#66406); +#66405 = CARTESIAN_POINT('',(-0.91,-12.75,0.8)); +#66406 = VECTOR('',#66407,1.); +#66407 = DIRECTION('',(0.,0.,1.)); +#66408 = CYLINDRICAL_SURFACE('',#66409,0.275); +#66409 = AXIS2_PLACEMENT_3D('',#66410,#66411,#66412); +#66410 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#66411 = DIRECTION('',(0.,0.,1.)); +#66412 = DIRECTION('',(0.,1.,0.)); +#66413 = ADVANCED_FACE('',(#66414),#66425,.F.); +#66414 = FACE_BOUND('',#66415,.F.); +#66415 = EDGE_LOOP('',(#66416,#66417,#66418,#66424)); +#66416 = ORIENTED_EDGE('',*,*,#66250,.F.); +#66417 = ORIENTED_EDGE('',*,*,#66353,.T.); +#66418 = ORIENTED_EDGE('',*,*,#66419,.T.); +#66419 = EDGE_CURVE('',#66354,#66387,#66420,.T.); +#66420 = LINE('',#66421,#66422); +#66421 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#66422 = VECTOR('',#66423,1.); +#66423 = DIRECTION('',(1.,0.,0.)); +#66424 = ORIENTED_EDGE('',*,*,#66403,.F.); +#66425 = PLANE('',#66426); +#66426 = AXIS2_PLACEMENT_3D('',#66427,#66428,#66429); +#66427 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66428 = DIRECTION('',(0.,1.,0.)); +#66429 = DIRECTION('',(1.,0.,0.)); +#66430 = ADVANCED_FACE('',(#66431),#66449,.T.); +#66431 = FACE_BOUND('',#66432,.T.); +#66432 = EDGE_LOOP('',(#66433,#66434,#66442,#66448)); +#66433 = ORIENTED_EDGE('',*,*,#66272,.T.); +#66434 = ORIENTED_EDGE('',*,*,#66435,.T.); +#66435 = EDGE_CURVE('',#66273,#66436,#66438,.T.); +#66436 = VERTEX_POINT('',#66437); +#66437 = CARTESIAN_POINT('',(-0.185,-11.9,0.)); +#66438 = LINE('',#66439,#66440); +#66439 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#66440 = VECTOR('',#66441,1.); +#66441 = DIRECTION('',(1.,0.,0.)); +#66442 = ORIENTED_EDGE('',*,*,#66443,.F.); +#66443 = EDGE_CURVE('',#66332,#66436,#66444,.T.); +#66444 = LINE('',#66445,#66446); +#66445 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66446 = VECTOR('',#66447,1.); +#66447 = DIRECTION('',(0.,1.,0.)); +#66448 = ORIENTED_EDGE('',*,*,#66339,.F.); +#66449 = PLANE('',#66450); +#66450 = AXIS2_PLACEMENT_3D('',#66451,#66452,#66453); +#66451 = CARTESIAN_POINT('',(-1.085,-12.3,0.)); +#66452 = DIRECTION('',(0.,0.,-1.)); +#66453 = DIRECTION('',(1.,0.,0.)); +#66454 = ADVANCED_FACE('',(#66455),#66480,.F.); +#66455 = FACE_BOUND('',#66456,.F.); +#66456 = EDGE_LOOP('',(#66457,#66458,#66466,#66474)); +#66457 = ORIENTED_EDGE('',*,*,#66288,.T.); +#66458 = ORIENTED_EDGE('',*,*,#66459,.T.); +#66459 = EDGE_CURVE('',#66281,#66460,#66462,.T.); +#66460 = VERTEX_POINT('',#66461); +#66461 = CARTESIAN_POINT('',(-0.185,-11.9,0.4)); +#66462 = LINE('',#66463,#66464); +#66463 = CARTESIAN_POINT('',(-1.085,-11.9,0.4)); +#66464 = VECTOR('',#66465,1.); +#66465 = DIRECTION('',(1.,0.,0.)); +#66466 = ORIENTED_EDGE('',*,*,#66467,.F.); +#66467 = EDGE_CURVE('',#66468,#66460,#66470,.T.); +#66468 = VERTEX_POINT('',#66469); +#66469 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#66470 = LINE('',#66471,#66472); +#66471 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#66472 = VECTOR('',#66473,1.); +#66473 = DIRECTION('',(0.,1.,0.)); +#66474 = ORIENTED_EDGE('',*,*,#66475,.F.); +#66475 = EDGE_CURVE('',#66212,#66468,#66476,.T.); +#66476 = LINE('',#66477,#66478); +#66477 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66478 = VECTOR('',#66479,1.); +#66479 = DIRECTION('',(1.,0.,0.)); +#66480 = PLANE('',#66481); +#66481 = AXIS2_PLACEMENT_3D('',#66482,#66483,#66484); +#66482 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66483 = DIRECTION('',(0.,0.,-1.)); +#66484 = DIRECTION('',(1.,0.,0.)); +#66485 = ADVANCED_FACE('',(#66486),#66497,.T.); +#66486 = FACE_BOUND('',#66487,.T.); +#66487 = EDGE_LOOP('',(#66488,#66489,#66490,#66496)); +#66488 = ORIENTED_EDGE('',*,*,#66280,.T.); +#66489 = ORIENTED_EDGE('',*,*,#66459,.T.); +#66490 = ORIENTED_EDGE('',*,*,#66491,.F.); +#66491 = EDGE_CURVE('',#66436,#66460,#66492,.T.); +#66492 = LINE('',#66493,#66494); +#66493 = CARTESIAN_POINT('',(-0.185,-11.9,0.)); +#66494 = VECTOR('',#66495,1.); +#66495 = DIRECTION('',(0.,0.,1.)); +#66496 = ORIENTED_EDGE('',*,*,#66435,.F.); +#66497 = PLANE('',#66498); +#66498 = AXIS2_PLACEMENT_3D('',#66499,#66500,#66501); +#66499 = CARTESIAN_POINT('',(-1.085,-11.9,0.)); +#66500 = DIRECTION('',(0.,1.,0.)); +#66501 = DIRECTION('',(1.,0.,0.)); +#66502 = ADVANCED_FACE('',(#66503),#66526,.T.); +#66503 = FACE_BOUND('',#66504,.T.); +#66504 = EDGE_LOOP('',(#66505,#66511,#66519,#66525)); +#66505 = ORIENTED_EDGE('',*,*,#66506,.T.); +#66506 = EDGE_CURVE('',#66332,#66468,#66507,.T.); +#66507 = LINE('',#66508,#66509); +#66508 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66509 = VECTOR('',#66510,1.); +#66510 = DIRECTION('',(0.,0.,1.)); +#66511 = ORIENTED_EDGE('',*,*,#66512,.T.); +#66512 = EDGE_CURVE('',#66468,#66513,#66515,.T.); +#66513 = VERTEX_POINT('',#66514); +#66514 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#66515 = LINE('',#66516,#66517); +#66516 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#66517 = VECTOR('',#66518,1.); +#66518 = DIRECTION('',(0.,-1.,0.)); +#66519 = ORIENTED_EDGE('',*,*,#66520,.F.); +#66520 = EDGE_CURVE('',#66324,#66513,#66521,.T.); +#66521 = LINE('',#66522,#66523); +#66522 = CARTESIAN_POINT('',(-0.185,-12.75,0.)); +#66523 = VECTOR('',#66524,1.); +#66524 = DIRECTION('',(0.,0.,1.)); +#66525 = ORIENTED_EDGE('',*,*,#66331,.F.); +#66526 = PLANE('',#66527); +#66527 = AXIS2_PLACEMENT_3D('',#66528,#66529,#66530); +#66528 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66529 = DIRECTION('',(1.,0.,0.)); +#66530 = DIRECTION('',(0.,-1.,0.)); +#66531 = ADVANCED_FACE('',(#66532),#66550,.F.); +#66532 = FACE_BOUND('',#66533,.F.); +#66533 = EDGE_LOOP('',(#66534,#66535,#66543,#66549)); +#66534 = ORIENTED_EDGE('',*,*,#66323,.F.); +#66535 = ORIENTED_EDGE('',*,*,#66536,.T.); +#66536 = EDGE_CURVE('',#66315,#66537,#66539,.T.); +#66537 = VERTEX_POINT('',#66538); +#66538 = CARTESIAN_POINT('',(-0.36,-12.75,0.4)); +#66539 = LINE('',#66540,#66541); +#66540 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#66541 = VECTOR('',#66542,1.); +#66542 = DIRECTION('',(0.,0.,1.)); +#66543 = ORIENTED_EDGE('',*,*,#66544,.T.); +#66544 = EDGE_CURVE('',#66537,#66513,#66545,.T.); +#66545 = LINE('',#66546,#66547); +#66546 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66547 = VECTOR('',#66548,1.); +#66548 = DIRECTION('',(1.,0.,0.)); +#66549 = ORIENTED_EDGE('',*,*,#66520,.F.); +#66550 = PLANE('',#66551); +#66551 = AXIS2_PLACEMENT_3D('',#66552,#66553,#66554); +#66552 = CARTESIAN_POINT('',(-1.085,-12.75,0.)); +#66553 = DIRECTION('',(0.,1.,0.)); +#66554 = DIRECTION('',(1.,0.,0.)); +#66555 = ADVANCED_FACE('',(#66556),#66576,.F.); +#66556 = FACE_BOUND('',#66557,.F.); +#66557 = EDGE_LOOP('',(#66558,#66559,#66568,#66574,#66575)); +#66558 = ORIENTED_EDGE('',*,*,#66395,.F.); +#66559 = ORIENTED_EDGE('',*,*,#66560,.F.); +#66560 = EDGE_CURVE('',#66561,#66385,#66563,.T.); +#66561 = VERTEX_POINT('',#66562); +#66562 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#66563 = CIRCLE('',#66564,0.275); +#66564 = AXIS2_PLACEMENT_3D('',#66565,#66566,#66567); +#66565 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#66566 = DIRECTION('',(0.,-0.,1.)); +#66567 = DIRECTION('',(0.,1.,0.)); +#66568 = ORIENTED_EDGE('',*,*,#66569,.F.); +#66569 = EDGE_CURVE('',#66537,#66561,#66570,.T.); +#66570 = LINE('',#66571,#66572); +#66571 = CARTESIAN_POINT('',(-0.36,-12.75,0.8)); +#66572 = VECTOR('',#66573,1.); +#66573 = DIRECTION('',(0.,0.,1.)); +#66574 = ORIENTED_EDGE('',*,*,#66536,.F.); +#66575 = ORIENTED_EDGE('',*,*,#66314,.T.); +#66576 = CYLINDRICAL_SURFACE('',#66577,0.275); +#66577 = AXIS2_PLACEMENT_3D('',#66578,#66579,#66580); +#66578 = CARTESIAN_POINT('',(-0.635,-12.75,0.8)); +#66579 = DIRECTION('',(0.,0.,1.)); +#66580 = DIRECTION('',(0.,1.,0.)); +#66581 = ADVANCED_FACE('',(#66582),#66600,.T.); +#66582 = FACE_BOUND('',#66583,.T.); +#66583 = EDGE_LOOP('',(#66584,#66585,#66593,#66599)); +#66584 = ORIENTED_EDGE('',*,*,#66369,.T.); +#66585 = ORIENTED_EDGE('',*,*,#66586,.T.); +#66586 = EDGE_CURVE('',#66362,#66587,#66589,.T.); +#66587 = VERTEX_POINT('',#66588); +#66588 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#66589 = LINE('',#66590,#66591); +#66590 = CARTESIAN_POINT('',(-1.085,-12.3,0.8)); +#66591 = VECTOR('',#66592,1.); +#66592 = DIRECTION('',(1.,0.,0.)); +#66593 = ORIENTED_EDGE('',*,*,#66594,.F.); +#66594 = EDGE_CURVE('',#66468,#66587,#66595,.T.); +#66595 = LINE('',#66596,#66597); +#66596 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#66597 = VECTOR('',#66598,1.); +#66598 = DIRECTION('',(0.,0.,1.)); +#66599 = ORIENTED_EDGE('',*,*,#66475,.F.); +#66600 = PLANE('',#66601); +#66601 = AXIS2_PLACEMENT_3D('',#66602,#66603,#66604); +#66602 = CARTESIAN_POINT('',(-1.085,-12.3,0.4)); +#66603 = DIRECTION('',(0.,1.,0.)); +#66604 = DIRECTION('',(1.,0.,0.)); +#66605 = ADVANCED_FACE('',(#66606),#66627,.T.); +#66606 = FACE_BOUND('',#66607,.T.); +#66607 = EDGE_LOOP('',(#66608,#66609,#66610,#66611,#66612,#66620,#66626) + ); +#66608 = ORIENTED_EDGE('',*,*,#66361,.F.); +#66609 = ORIENTED_EDGE('',*,*,#66419,.T.); +#66610 = ORIENTED_EDGE('',*,*,#66384,.F.); +#66611 = ORIENTED_EDGE('',*,*,#66560,.F.); +#66612 = ORIENTED_EDGE('',*,*,#66613,.T.); +#66613 = EDGE_CURVE('',#66561,#66614,#66616,.T.); +#66614 = VERTEX_POINT('',#66615); +#66615 = CARTESIAN_POINT('',(-0.185,-12.75,0.8)); +#66616 = LINE('',#66617,#66618); +#66617 = CARTESIAN_POINT('',(-1.085,-12.75,0.8)); +#66618 = VECTOR('',#66619,1.); +#66619 = DIRECTION('',(1.,0.,0.)); +#66620 = ORIENTED_EDGE('',*,*,#66621,.F.); +#66621 = EDGE_CURVE('',#66587,#66614,#66622,.T.); +#66622 = LINE('',#66623,#66624); +#66623 = CARTESIAN_POINT('',(-0.185,-12.3,0.8)); +#66624 = VECTOR('',#66625,1.); +#66625 = DIRECTION('',(0.,-1.,0.)); +#66626 = ORIENTED_EDGE('',*,*,#66586,.F.); +#66627 = PLANE('',#66628); +#66628 = AXIS2_PLACEMENT_3D('',#66629,#66630,#66631); +#66629 = CARTESIAN_POINT('',(-0.635,-12.525,0.8)); +#66630 = DIRECTION('',(0.,0.,1.)); +#66631 = DIRECTION('',(0.,1.,0.)); +#66632 = ADVANCED_FACE('',(#66633),#66639,.T.); +#66633 = FACE_BOUND('',#66634,.T.); +#66634 = EDGE_LOOP('',(#66635,#66636,#66637,#66638)); +#66635 = ORIENTED_EDGE('',*,*,#66443,.T.); +#66636 = ORIENTED_EDGE('',*,*,#66491,.T.); +#66637 = ORIENTED_EDGE('',*,*,#66467,.F.); +#66638 = ORIENTED_EDGE('',*,*,#66506,.F.); +#66639 = PLANE('',#66640); +#66640 = AXIS2_PLACEMENT_3D('',#66641,#66642,#66643); +#66641 = CARTESIAN_POINT('',(-0.185,-12.3,0.)); +#66642 = DIRECTION('',(1.,0.,0.)); +#66643 = DIRECTION('',(0.,0.,1.)); +#66644 = ADVANCED_FACE('',(#66645),#66656,.T.); +#66645 = FACE_BOUND('',#66646,.T.); +#66646 = EDGE_LOOP('',(#66647,#66648,#66649,#66655)); +#66647 = ORIENTED_EDGE('',*,*,#66594,.T.); +#66648 = ORIENTED_EDGE('',*,*,#66621,.T.); +#66649 = ORIENTED_EDGE('',*,*,#66650,.F.); +#66650 = EDGE_CURVE('',#66513,#66614,#66651,.T.); +#66651 = LINE('',#66652,#66653); +#66652 = CARTESIAN_POINT('',(-0.185,-12.75,0.4)); +#66653 = VECTOR('',#66654,1.); +#66654 = DIRECTION('',(0.,0.,1.)); +#66655 = ORIENTED_EDGE('',*,*,#66512,.F.); +#66656 = PLANE('',#66657); +#66657 = AXIS2_PLACEMENT_3D('',#66658,#66659,#66660); +#66658 = CARTESIAN_POINT('',(-0.185,-12.3,0.4)); +#66659 = DIRECTION('',(1.,0.,0.)); +#66660 = DIRECTION('',(0.,-1.,0.)); +#66661 = ADVANCED_FACE('',(#66662),#66668,.F.); +#66662 = FACE_BOUND('',#66663,.F.); +#66663 = EDGE_LOOP('',(#66664,#66665,#66666,#66667)); +#66664 = ORIENTED_EDGE('',*,*,#66544,.F.); +#66665 = ORIENTED_EDGE('',*,*,#66569,.T.); +#66666 = ORIENTED_EDGE('',*,*,#66613,.T.); +#66667 = ORIENTED_EDGE('',*,*,#66650,.F.); +#66668 = PLANE('',#66669); +#66669 = AXIS2_PLACEMENT_3D('',#66670,#66671,#66672); +#66670 = CARTESIAN_POINT('',(-1.085,-12.75,0.4)); +#66671 = DIRECTION('',(0.,1.,0.)); +#66672 = DIRECTION('',(1.,0.,0.)); +#66673 = MANIFOLD_SOLID_BREP('',#66674); +#66674 = CLOSED_SHELL('',(#66675,#66715,#66746,#66777,#66827,#66858, + #66891,#66908,#66932,#66963,#66980,#67009,#67033,#67059,#67083, + #67110,#67122,#67139)); +#66675 = ADVANCED_FACE('',(#66676),#66710,.T.); +#66676 = FACE_BOUND('',#66677,.T.); +#66677 = EDGE_LOOP('',(#66678,#66688,#66696,#66704)); +#66678 = ORIENTED_EDGE('',*,*,#66679,.T.); +#66679 = EDGE_CURVE('',#66680,#66682,#66684,.T.); +#66680 = VERTEX_POINT('',#66681); +#66681 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66682 = VERTEX_POINT('',#66683); +#66683 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66684 = LINE('',#66685,#66686); +#66685 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66686 = VECTOR('',#66687,1.); +#66687 = DIRECTION('',(0.,0.,1.)); +#66688 = ORIENTED_EDGE('',*,*,#66689,.T.); +#66689 = EDGE_CURVE('',#66682,#66690,#66692,.T.); +#66690 = VERTEX_POINT('',#66691); +#66691 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#66692 = LINE('',#66693,#66694); +#66693 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66694 = VECTOR('',#66695,1.); +#66695 = DIRECTION('',(1.,0.,0.)); +#66696 = ORIENTED_EDGE('',*,*,#66697,.F.); +#66697 = EDGE_CURVE('',#66698,#66690,#66700,.T.); +#66698 = VERTEX_POINT('',#66699); +#66699 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66700 = LINE('',#66701,#66702); +#66701 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66702 = VECTOR('',#66703,1.); +#66703 = DIRECTION('',(0.,0.,1.)); +#66704 = ORIENTED_EDGE('',*,*,#66705,.F.); +#66705 = EDGE_CURVE('',#66680,#66698,#66706,.T.); +#66706 = LINE('',#66707,#66708); +#66707 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66708 = VECTOR('',#66709,1.); +#66709 = DIRECTION('',(1.,0.,0.)); +#66710 = PLANE('',#66711); +#66711 = AXIS2_PLACEMENT_3D('',#66712,#66713,#66714); +#66712 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66713 = DIRECTION('',(0.,1.,0.)); +#66714 = DIRECTION('',(1.,0.,0.)); +#66715 = ADVANCED_FACE('',(#66716),#66741,.F.); +#66716 = FACE_BOUND('',#66717,.F.); +#66717 = EDGE_LOOP('',(#66718,#66726,#66727,#66735)); +#66718 = ORIENTED_EDGE('',*,*,#66719,.F.); +#66719 = EDGE_CURVE('',#66680,#66720,#66722,.T.); +#66720 = VERTEX_POINT('',#66721); +#66721 = CARTESIAN_POINT('',(-9.,5.535,0.)); +#66722 = LINE('',#66723,#66724); +#66723 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66724 = VECTOR('',#66725,1.); +#66725 = DIRECTION('',(0.,-1.,0.)); +#66726 = ORIENTED_EDGE('',*,*,#66679,.T.); +#66727 = ORIENTED_EDGE('',*,*,#66728,.T.); +#66728 = EDGE_CURVE('',#66682,#66729,#66731,.T.); +#66729 = VERTEX_POINT('',#66730); +#66730 = CARTESIAN_POINT('',(-9.,5.535,0.4)); +#66731 = LINE('',#66732,#66733); +#66732 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66733 = VECTOR('',#66734,1.); +#66734 = DIRECTION('',(0.,-1.,0.)); +#66735 = ORIENTED_EDGE('',*,*,#66736,.F.); +#66736 = EDGE_CURVE('',#66720,#66729,#66737,.T.); +#66737 = LINE('',#66738,#66739); +#66738 = CARTESIAN_POINT('',(-9.,5.535,0.8)); +#66739 = VECTOR('',#66740,1.); +#66740 = DIRECTION('',(0.,0.,1.)); +#66741 = PLANE('',#66742); +#66742 = AXIS2_PLACEMENT_3D('',#66743,#66744,#66745); +#66743 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66744 = DIRECTION('',(1.,0.,0.)); +#66745 = DIRECTION('',(0.,-1.,0.)); +#66746 = ADVANCED_FACE('',(#66747),#66772,.F.); +#66747 = FACE_BOUND('',#66748,.F.); +#66748 = EDGE_LOOP('',(#66749,#66757,#66765,#66771)); +#66749 = ORIENTED_EDGE('',*,*,#66750,.T.); +#66750 = EDGE_CURVE('',#66698,#66751,#66753,.T.); +#66751 = VERTEX_POINT('',#66752); +#66752 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#66753 = LINE('',#66754,#66755); +#66754 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66755 = VECTOR('',#66756,1.); +#66756 = DIRECTION('',(1.,0.,0.)); +#66757 = ORIENTED_EDGE('',*,*,#66758,.T.); +#66758 = EDGE_CURVE('',#66751,#66759,#66761,.T.); +#66759 = VERTEX_POINT('',#66760); +#66760 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#66761 = LINE('',#66762,#66763); +#66762 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#66763 = VECTOR('',#66764,1.); +#66764 = DIRECTION('',(0.,0.,1.)); +#66765 = ORIENTED_EDGE('',*,*,#66766,.F.); +#66766 = EDGE_CURVE('',#66690,#66759,#66767,.T.); +#66767 = LINE('',#66768,#66769); +#66768 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#66769 = VECTOR('',#66770,1.); +#66770 = DIRECTION('',(1.,0.,0.)); +#66771 = ORIENTED_EDGE('',*,*,#66697,.F.); +#66772 = PLANE('',#66773); +#66773 = AXIS2_PLACEMENT_3D('',#66774,#66775,#66776); +#66774 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66775 = DIRECTION('',(0.,-1.,0.)); +#66776 = DIRECTION('',(0.,0.,1.)); +#66777 = ADVANCED_FACE('',(#66778),#66822,.F.); +#66778 = FACE_BOUND('',#66779,.F.); +#66779 = EDGE_LOOP('',(#66780,#66781,#66782,#66791,#66800,#66808,#66816) + ); +#66780 = ORIENTED_EDGE('',*,*,#66705,.F.); +#66781 = ORIENTED_EDGE('',*,*,#66719,.T.); +#66782 = ORIENTED_EDGE('',*,*,#66783,.F.); +#66783 = EDGE_CURVE('',#66784,#66720,#66786,.T.); +#66784 = VERTEX_POINT('',#66785); +#66785 = CARTESIAN_POINT('',(-8.725,5.26,0.)); +#66786 = CIRCLE('',#66787,0.275); +#66787 = AXIS2_PLACEMENT_3D('',#66788,#66789,#66790); +#66788 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#66789 = DIRECTION('',(0.,0.,1.)); +#66790 = DIRECTION('',(1.,0.,-0.)); +#66791 = ORIENTED_EDGE('',*,*,#66792,.F.); +#66792 = EDGE_CURVE('',#66793,#66784,#66795,.T.); +#66793 = VERTEX_POINT('',#66794); +#66794 = CARTESIAN_POINT('',(-9.,4.985,0.)); +#66795 = CIRCLE('',#66796,0.275); +#66796 = AXIS2_PLACEMENT_3D('',#66797,#66798,#66799); +#66797 = CARTESIAN_POINT('',(-9.,5.26,0.)); +#66798 = DIRECTION('',(0.,0.,1.)); +#66799 = DIRECTION('',(1.,0.,-0.)); +#66800 = ORIENTED_EDGE('',*,*,#66801,.T.); +#66801 = EDGE_CURVE('',#66793,#66802,#66804,.T.); +#66802 = VERTEX_POINT('',#66803); +#66803 = CARTESIAN_POINT('',(-9.,4.81,0.)); +#66804 = LINE('',#66805,#66806); +#66805 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#66806 = VECTOR('',#66807,1.); +#66807 = DIRECTION('',(0.,-1.,0.)); +#66808 = ORIENTED_EDGE('',*,*,#66809,.F.); +#66809 = EDGE_CURVE('',#66810,#66802,#66812,.T.); +#66810 = VERTEX_POINT('',#66811); +#66811 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#66812 = LINE('',#66813,#66814); +#66813 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#66814 = VECTOR('',#66815,1.); +#66815 = DIRECTION('',(-1.,0.,0.)); +#66816 = ORIENTED_EDGE('',*,*,#66817,.F.); +#66817 = EDGE_CURVE('',#66698,#66810,#66818,.T.); +#66818 = LINE('',#66819,#66820); +#66819 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66820 = VECTOR('',#66821,1.); +#66821 = DIRECTION('',(0.,-1.,0.)); +#66822 = PLANE('',#66823); +#66823 = AXIS2_PLACEMENT_3D('',#66824,#66825,#66826); +#66824 = CARTESIAN_POINT('',(-8.775,5.26,0.)); +#66825 = DIRECTION('',(0.,0.,1.)); +#66826 = DIRECTION('',(1.,0.,-0.)); +#66827 = ADVANCED_FACE('',(#66828),#66853,.T.); +#66828 = FACE_BOUND('',#66829,.T.); +#66829 = EDGE_LOOP('',(#66830,#66838,#66846,#66852)); +#66830 = ORIENTED_EDGE('',*,*,#66831,.T.); +#66831 = EDGE_CURVE('',#66682,#66832,#66834,.T.); +#66832 = VERTEX_POINT('',#66833); +#66833 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#66834 = LINE('',#66835,#66836); +#66835 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66836 = VECTOR('',#66837,1.); +#66837 = DIRECTION('',(0.,0.,1.)); +#66838 = ORIENTED_EDGE('',*,*,#66839,.T.); +#66839 = EDGE_CURVE('',#66832,#66840,#66842,.T.); +#66840 = VERTEX_POINT('',#66841); +#66841 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#66842 = LINE('',#66843,#66844); +#66843 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#66844 = VECTOR('',#66845,1.); +#66845 = DIRECTION('',(1.,0.,0.)); +#66846 = ORIENTED_EDGE('',*,*,#66847,.F.); +#66847 = EDGE_CURVE('',#66690,#66840,#66848,.T.); +#66848 = LINE('',#66849,#66850); +#66849 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#66850 = VECTOR('',#66851,1.); +#66851 = DIRECTION('',(0.,0.,1.)); +#66852 = ORIENTED_EDGE('',*,*,#66689,.F.); +#66853 = PLANE('',#66854); +#66854 = AXIS2_PLACEMENT_3D('',#66855,#66856,#66857); +#66855 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66856 = DIRECTION('',(0.,1.,0.)); +#66857 = DIRECTION('',(1.,0.,0.)); +#66858 = ADVANCED_FACE('',(#66859),#66886,.F.); +#66859 = FACE_BOUND('',#66860,.F.); +#66860 = EDGE_LOOP('',(#66861,#66872,#66878,#66879,#66880)); +#66861 = ORIENTED_EDGE('',*,*,#66862,.F.); +#66862 = EDGE_CURVE('',#66863,#66865,#66867,.T.); +#66863 = VERTEX_POINT('',#66864); +#66864 = CARTESIAN_POINT('',(-8.725,5.26,0.8)); +#66865 = VERTEX_POINT('',#66866); +#66866 = CARTESIAN_POINT('',(-9.,5.535,0.8)); +#66867 = CIRCLE('',#66868,0.275); +#66868 = AXIS2_PLACEMENT_3D('',#66869,#66870,#66871); +#66869 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#66870 = DIRECTION('',(0.,0.,1.)); +#66871 = DIRECTION('',(1.,0.,-0.)); +#66872 = ORIENTED_EDGE('',*,*,#66873,.T.); +#66873 = EDGE_CURVE('',#66863,#66784,#66874,.T.); +#66874 = LINE('',#66875,#66876); +#66875 = CARTESIAN_POINT('',(-8.725,5.26,0.8)); +#66876 = VECTOR('',#66877,1.); +#66877 = DIRECTION('',(-0.,-0.,-1.)); +#66878 = ORIENTED_EDGE('',*,*,#66783,.T.); +#66879 = ORIENTED_EDGE('',*,*,#66736,.T.); +#66880 = ORIENTED_EDGE('',*,*,#66881,.T.); +#66881 = EDGE_CURVE('',#66729,#66865,#66882,.T.); +#66882 = LINE('',#66883,#66884); +#66883 = CARTESIAN_POINT('',(-9.,5.535,0.8)); +#66884 = VECTOR('',#66885,1.); +#66885 = DIRECTION('',(0.,0.,1.)); +#66886 = CYLINDRICAL_SURFACE('',#66887,0.275); +#66887 = AXIS2_PLACEMENT_3D('',#66888,#66889,#66890); +#66888 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#66889 = DIRECTION('',(0.,0.,1.)); +#66890 = DIRECTION('',(1.,0.,-0.)); +#66891 = ADVANCED_FACE('',(#66892),#66903,.F.); +#66892 = FACE_BOUND('',#66893,.F.); +#66893 = EDGE_LOOP('',(#66894,#66895,#66896,#66902)); +#66894 = ORIENTED_EDGE('',*,*,#66728,.F.); +#66895 = ORIENTED_EDGE('',*,*,#66831,.T.); +#66896 = ORIENTED_EDGE('',*,*,#66897,.T.); +#66897 = EDGE_CURVE('',#66832,#66865,#66898,.T.); +#66898 = LINE('',#66899,#66900); +#66899 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#66900 = VECTOR('',#66901,1.); +#66901 = DIRECTION('',(0.,-1.,0.)); +#66902 = ORIENTED_EDGE('',*,*,#66881,.F.); +#66903 = PLANE('',#66904); +#66904 = AXIS2_PLACEMENT_3D('',#66905,#66906,#66907); +#66905 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#66906 = DIRECTION('',(1.,0.,0.)); +#66907 = DIRECTION('',(0.,-1.,0.)); +#66908 = ADVANCED_FACE('',(#66909),#66927,.T.); +#66909 = FACE_BOUND('',#66910,.T.); +#66910 = EDGE_LOOP('',(#66911,#66912,#66920,#66926)); +#66911 = ORIENTED_EDGE('',*,*,#66750,.T.); +#66912 = ORIENTED_EDGE('',*,*,#66913,.T.); +#66913 = EDGE_CURVE('',#66751,#66914,#66916,.T.); +#66914 = VERTEX_POINT('',#66915); +#66915 = CARTESIAN_POINT('',(-8.15,4.81,0.)); +#66916 = LINE('',#66917,#66918); +#66917 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#66918 = VECTOR('',#66919,1.); +#66919 = DIRECTION('',(0.,-1.,0.)); +#66920 = ORIENTED_EDGE('',*,*,#66921,.F.); +#66921 = EDGE_CURVE('',#66810,#66914,#66922,.T.); +#66922 = LINE('',#66923,#66924); +#66923 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#66924 = VECTOR('',#66925,1.); +#66925 = DIRECTION('',(1.,0.,0.)); +#66926 = ORIENTED_EDGE('',*,*,#66817,.F.); +#66927 = PLANE('',#66928); +#66928 = AXIS2_PLACEMENT_3D('',#66929,#66930,#66931); +#66929 = CARTESIAN_POINT('',(-8.55,5.71,0.)); +#66930 = DIRECTION('',(0.,0.,-1.)); +#66931 = DIRECTION('',(0.,-1.,0.)); +#66932 = ADVANCED_FACE('',(#66933),#66958,.F.); +#66933 = FACE_BOUND('',#66934,.F.); +#66934 = EDGE_LOOP('',(#66935,#66936,#66944,#66952)); +#66935 = ORIENTED_EDGE('',*,*,#66766,.T.); +#66936 = ORIENTED_EDGE('',*,*,#66937,.T.); +#66937 = EDGE_CURVE('',#66759,#66938,#66940,.T.); +#66938 = VERTEX_POINT('',#66939); +#66939 = CARTESIAN_POINT('',(-8.15,4.81,0.4)); +#66940 = LINE('',#66941,#66942); +#66941 = CARTESIAN_POINT('',(-8.15,5.71,0.4)); +#66942 = VECTOR('',#66943,1.); +#66943 = DIRECTION('',(0.,-1.,0.)); +#66944 = ORIENTED_EDGE('',*,*,#66945,.F.); +#66945 = EDGE_CURVE('',#66946,#66938,#66948,.T.); +#66946 = VERTEX_POINT('',#66947); +#66947 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#66948 = LINE('',#66949,#66950); +#66949 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#66950 = VECTOR('',#66951,1.); +#66951 = DIRECTION('',(1.,0.,0.)); +#66952 = ORIENTED_EDGE('',*,*,#66953,.F.); +#66953 = EDGE_CURVE('',#66690,#66946,#66954,.T.); +#66954 = LINE('',#66955,#66956); +#66955 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#66956 = VECTOR('',#66957,1.); +#66957 = DIRECTION('',(0.,-1.,0.)); +#66958 = PLANE('',#66959); +#66959 = AXIS2_PLACEMENT_3D('',#66960,#66961,#66962); +#66960 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#66961 = DIRECTION('',(0.,0.,-1.)); +#66962 = DIRECTION('',(0.,-1.,0.)); +#66963 = ADVANCED_FACE('',(#66964),#66975,.T.); +#66964 = FACE_BOUND('',#66965,.T.); +#66965 = EDGE_LOOP('',(#66966,#66967,#66968,#66974)); +#66966 = ORIENTED_EDGE('',*,*,#66758,.T.); +#66967 = ORIENTED_EDGE('',*,*,#66937,.T.); +#66968 = ORIENTED_EDGE('',*,*,#66969,.F.); +#66969 = EDGE_CURVE('',#66914,#66938,#66970,.T.); +#66970 = LINE('',#66971,#66972); +#66971 = CARTESIAN_POINT('',(-8.15,4.81,0.)); +#66972 = VECTOR('',#66973,1.); +#66973 = DIRECTION('',(0.,0.,1.)); +#66974 = ORIENTED_EDGE('',*,*,#66913,.F.); +#66975 = PLANE('',#66976); +#66976 = AXIS2_PLACEMENT_3D('',#66977,#66978,#66979); +#66977 = CARTESIAN_POINT('',(-8.15,5.71,0.)); +#66978 = DIRECTION('',(1.,0.,0.)); +#66979 = DIRECTION('',(0.,-1.,0.)); +#66980 = ADVANCED_FACE('',(#66981),#67004,.T.); +#66981 = FACE_BOUND('',#66982,.T.); +#66982 = EDGE_LOOP('',(#66983,#66989,#66997,#67003)); +#66983 = ORIENTED_EDGE('',*,*,#66984,.T.); +#66984 = EDGE_CURVE('',#66810,#66946,#66985,.T.); +#66985 = LINE('',#66986,#66987); +#66986 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#66987 = VECTOR('',#66988,1.); +#66988 = DIRECTION('',(0.,0.,1.)); +#66989 = ORIENTED_EDGE('',*,*,#66990,.T.); +#66990 = EDGE_CURVE('',#66946,#66991,#66993,.T.); +#66991 = VERTEX_POINT('',#66992); +#66992 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#66993 = LINE('',#66994,#66995); +#66994 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#66995 = VECTOR('',#66996,1.); +#66996 = DIRECTION('',(-1.,0.,0.)); +#66997 = ORIENTED_EDGE('',*,*,#66998,.F.); +#66998 = EDGE_CURVE('',#66802,#66991,#66999,.T.); +#66999 = LINE('',#67000,#67001); +#67000 = CARTESIAN_POINT('',(-9.,4.81,0.)); +#67001 = VECTOR('',#67002,1.); +#67002 = DIRECTION('',(0.,0.,1.)); +#67003 = ORIENTED_EDGE('',*,*,#66809,.F.); +#67004 = PLANE('',#67005); +#67005 = AXIS2_PLACEMENT_3D('',#67006,#67007,#67008); +#67006 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#67007 = DIRECTION('',(0.,-1.,0.)); +#67008 = DIRECTION('',(-1.,0.,0.)); +#67009 = ADVANCED_FACE('',(#67010),#67028,.F.); +#67010 = FACE_BOUND('',#67011,.F.); +#67011 = EDGE_LOOP('',(#67012,#67013,#67021,#67027)); +#67012 = ORIENTED_EDGE('',*,*,#66801,.F.); +#67013 = ORIENTED_EDGE('',*,*,#67014,.T.); +#67014 = EDGE_CURVE('',#66793,#67015,#67017,.T.); +#67015 = VERTEX_POINT('',#67016); +#67016 = CARTESIAN_POINT('',(-9.,4.985,0.4)); +#67017 = LINE('',#67018,#67019); +#67018 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#67019 = VECTOR('',#67020,1.); +#67020 = DIRECTION('',(0.,0.,1.)); +#67021 = ORIENTED_EDGE('',*,*,#67022,.T.); +#67022 = EDGE_CURVE('',#67015,#66991,#67023,.T.); +#67023 = LINE('',#67024,#67025); +#67024 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#67025 = VECTOR('',#67026,1.); +#67026 = DIRECTION('',(0.,-1.,0.)); +#67027 = ORIENTED_EDGE('',*,*,#66998,.F.); +#67028 = PLANE('',#67029); +#67029 = AXIS2_PLACEMENT_3D('',#67030,#67031,#67032); +#67030 = CARTESIAN_POINT('',(-9.,5.71,0.)); +#67031 = DIRECTION('',(1.,0.,0.)); +#67032 = DIRECTION('',(0.,-1.,0.)); +#67033 = ADVANCED_FACE('',(#67034),#67054,.F.); +#67034 = FACE_BOUND('',#67035,.F.); +#67035 = EDGE_LOOP('',(#67036,#67037,#67046,#67052,#67053)); +#67036 = ORIENTED_EDGE('',*,*,#66873,.F.); +#67037 = ORIENTED_EDGE('',*,*,#67038,.F.); +#67038 = EDGE_CURVE('',#67039,#66863,#67041,.T.); +#67039 = VERTEX_POINT('',#67040); +#67040 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#67041 = CIRCLE('',#67042,0.275); +#67042 = AXIS2_PLACEMENT_3D('',#67043,#67044,#67045); +#67043 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#67044 = DIRECTION('',(0.,0.,1.)); +#67045 = DIRECTION('',(1.,0.,-0.)); +#67046 = ORIENTED_EDGE('',*,*,#67047,.F.); +#67047 = EDGE_CURVE('',#67015,#67039,#67048,.T.); +#67048 = LINE('',#67049,#67050); +#67049 = CARTESIAN_POINT('',(-9.,4.985,0.8)); +#67050 = VECTOR('',#67051,1.); +#67051 = DIRECTION('',(0.,0.,1.)); +#67052 = ORIENTED_EDGE('',*,*,#67014,.F.); +#67053 = ORIENTED_EDGE('',*,*,#66792,.T.); +#67054 = CYLINDRICAL_SURFACE('',#67055,0.275); +#67055 = AXIS2_PLACEMENT_3D('',#67056,#67057,#67058); +#67056 = CARTESIAN_POINT('',(-9.,5.26,0.8)); +#67057 = DIRECTION('',(0.,0.,1.)); +#67058 = DIRECTION('',(1.,0.,-0.)); +#67059 = ADVANCED_FACE('',(#67060),#67078,.T.); +#67060 = FACE_BOUND('',#67061,.T.); +#67061 = EDGE_LOOP('',(#67062,#67063,#67071,#67077)); +#67062 = ORIENTED_EDGE('',*,*,#66847,.T.); +#67063 = ORIENTED_EDGE('',*,*,#67064,.T.); +#67064 = EDGE_CURVE('',#66840,#67065,#67067,.T.); +#67065 = VERTEX_POINT('',#67066); +#67066 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#67067 = LINE('',#67068,#67069); +#67068 = CARTESIAN_POINT('',(-8.55,5.71,0.8)); +#67069 = VECTOR('',#67070,1.); +#67070 = DIRECTION('',(0.,-1.,0.)); +#67071 = ORIENTED_EDGE('',*,*,#67072,.F.); +#67072 = EDGE_CURVE('',#66946,#67065,#67073,.T.); +#67073 = LINE('',#67074,#67075); +#67074 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#67075 = VECTOR('',#67076,1.); +#67076 = DIRECTION('',(0.,0.,1.)); +#67077 = ORIENTED_EDGE('',*,*,#66953,.F.); +#67078 = PLANE('',#67079); +#67079 = AXIS2_PLACEMENT_3D('',#67080,#67081,#67082); +#67080 = CARTESIAN_POINT('',(-8.55,5.71,0.4)); +#67081 = DIRECTION('',(1.,0.,0.)); +#67082 = DIRECTION('',(0.,-1.,0.)); +#67083 = ADVANCED_FACE('',(#67084),#67105,.T.); +#67084 = FACE_BOUND('',#67085,.T.); +#67085 = EDGE_LOOP('',(#67086,#67087,#67088,#67089,#67090,#67098,#67104) + ); +#67086 = ORIENTED_EDGE('',*,*,#66839,.F.); +#67087 = ORIENTED_EDGE('',*,*,#66897,.T.); +#67088 = ORIENTED_EDGE('',*,*,#66862,.F.); +#67089 = ORIENTED_EDGE('',*,*,#67038,.F.); +#67090 = ORIENTED_EDGE('',*,*,#67091,.T.); +#67091 = EDGE_CURVE('',#67039,#67092,#67094,.T.); +#67092 = VERTEX_POINT('',#67093); +#67093 = CARTESIAN_POINT('',(-9.,4.81,0.8)); +#67094 = LINE('',#67095,#67096); +#67095 = CARTESIAN_POINT('',(-9.,5.71,0.8)); +#67096 = VECTOR('',#67097,1.); +#67097 = DIRECTION('',(0.,-1.,0.)); +#67098 = ORIENTED_EDGE('',*,*,#67099,.F.); +#67099 = EDGE_CURVE('',#67065,#67092,#67100,.T.); +#67100 = LINE('',#67101,#67102); +#67101 = CARTESIAN_POINT('',(-8.55,4.81,0.8)); +#67102 = VECTOR('',#67103,1.); +#67103 = DIRECTION('',(-1.,0.,0.)); +#67104 = ORIENTED_EDGE('',*,*,#67064,.F.); +#67105 = PLANE('',#67106); +#67106 = AXIS2_PLACEMENT_3D('',#67107,#67108,#67109); +#67107 = CARTESIAN_POINT('',(-8.775,5.26,0.8)); +#67108 = DIRECTION('',(0.,0.,1.)); +#67109 = DIRECTION('',(1.,0.,-0.)); +#67110 = ADVANCED_FACE('',(#67111),#67117,.T.); +#67111 = FACE_BOUND('',#67112,.T.); +#67112 = EDGE_LOOP('',(#67113,#67114,#67115,#67116)); +#67113 = ORIENTED_EDGE('',*,*,#66921,.T.); +#67114 = ORIENTED_EDGE('',*,*,#66969,.T.); +#67115 = ORIENTED_EDGE('',*,*,#66945,.F.); +#67116 = ORIENTED_EDGE('',*,*,#66984,.F.); +#67117 = PLANE('',#67118); +#67118 = AXIS2_PLACEMENT_3D('',#67119,#67120,#67121); +#67119 = CARTESIAN_POINT('',(-8.55,4.81,0.)); +#67120 = DIRECTION('',(0.,-1.,0.)); +#67121 = DIRECTION('',(0.,0.,1.)); +#67122 = ADVANCED_FACE('',(#67123),#67134,.T.); +#67123 = FACE_BOUND('',#67124,.T.); +#67124 = EDGE_LOOP('',(#67125,#67126,#67127,#67133)); +#67125 = ORIENTED_EDGE('',*,*,#67072,.T.); +#67126 = ORIENTED_EDGE('',*,*,#67099,.T.); +#67127 = ORIENTED_EDGE('',*,*,#67128,.F.); +#67128 = EDGE_CURVE('',#66991,#67092,#67129,.T.); +#67129 = LINE('',#67130,#67131); +#67130 = CARTESIAN_POINT('',(-9.,4.81,0.4)); +#67131 = VECTOR('',#67132,1.); +#67132 = DIRECTION('',(0.,0.,1.)); +#67133 = ORIENTED_EDGE('',*,*,#66990,.F.); +#67134 = PLANE('',#67135); +#67135 = AXIS2_PLACEMENT_3D('',#67136,#67137,#67138); +#67136 = CARTESIAN_POINT('',(-8.55,4.81,0.4)); +#67137 = DIRECTION('',(0.,-1.,0.)); +#67138 = DIRECTION('',(-1.,0.,0.)); +#67139 = ADVANCED_FACE('',(#67140),#67146,.F.); +#67140 = FACE_BOUND('',#67141,.F.); +#67141 = EDGE_LOOP('',(#67142,#67143,#67144,#67145)); +#67142 = ORIENTED_EDGE('',*,*,#67022,.F.); +#67143 = ORIENTED_EDGE('',*,*,#67047,.T.); +#67144 = ORIENTED_EDGE('',*,*,#67091,.T.); +#67145 = ORIENTED_EDGE('',*,*,#67128,.F.); +#67146 = PLANE('',#67147); +#67147 = AXIS2_PLACEMENT_3D('',#67148,#67149,#67150); +#67148 = CARTESIAN_POINT('',(-9.,5.71,0.4)); +#67149 = DIRECTION('',(1.,0.,0.)); +#67150 = DIRECTION('',(0.,-1.,0.)); +#67151 = MANIFOLD_SOLID_BREP('',#67152); +#67152 = CLOSED_SHELL('',(#67153,#67193,#67233,#67255,#67277,#67289)); +#67153 = ADVANCED_FACE('',(#67154),#67188,.F.); +#67154 = FACE_BOUND('',#67155,.F.); +#67155 = EDGE_LOOP('',(#67156,#67166,#67174,#67182)); +#67156 = ORIENTED_EDGE('',*,*,#67157,.F.); +#67157 = EDGE_CURVE('',#67158,#67160,#67162,.T.); +#67158 = VERTEX_POINT('',#67159); +#67159 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67160 = VERTEX_POINT('',#67161); +#67161 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#67162 = LINE('',#67163,#67164); +#67163 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67164 = VECTOR('',#67165,1.); +#67165 = DIRECTION('',(0.,0.,1.)); +#67166 = ORIENTED_EDGE('',*,*,#67167,.T.); +#67167 = EDGE_CURVE('',#67158,#67168,#67170,.T.); +#67168 = VERTEX_POINT('',#67169); +#67169 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#67170 = LINE('',#67171,#67172); +#67171 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67172 = VECTOR('',#67173,1.); +#67173 = DIRECTION('',(0.,1.,0.)); +#67174 = ORIENTED_EDGE('',*,*,#67175,.T.); +#67175 = EDGE_CURVE('',#67168,#67176,#67178,.T.); +#67176 = VERTEX_POINT('',#67177); +#67177 = CARTESIAN_POINT('',(-1.95,-2.01,0.4)); +#67178 = LINE('',#67179,#67180); +#67179 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#67180 = VECTOR('',#67181,1.); +#67181 = DIRECTION('',(0.,0.,1.)); +#67182 = ORIENTED_EDGE('',*,*,#67183,.F.); +#67183 = EDGE_CURVE('',#67160,#67176,#67184,.T.); +#67184 = LINE('',#67185,#67186); +#67185 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#67186 = VECTOR('',#67187,1.); +#67187 = DIRECTION('',(0.,1.,0.)); +#67188 = PLANE('',#67189); +#67189 = AXIS2_PLACEMENT_3D('',#67190,#67191,#67192); +#67190 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67191 = DIRECTION('',(1.,0.,0.)); +#67192 = DIRECTION('',(0.,0.,1.)); +#67193 = ADVANCED_FACE('',(#67194),#67228,.T.); +#67194 = FACE_BOUND('',#67195,.T.); +#67195 = EDGE_LOOP('',(#67196,#67206,#67214,#67222)); +#67196 = ORIENTED_EDGE('',*,*,#67197,.F.); +#67197 = EDGE_CURVE('',#67198,#67200,#67202,.T.); +#67198 = VERTEX_POINT('',#67199); +#67199 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#67200 = VERTEX_POINT('',#67201); +#67201 = CARTESIAN_POINT('',(-1.05,-2.91,0.4)); +#67202 = LINE('',#67203,#67204); +#67203 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#67204 = VECTOR('',#67205,1.); +#67205 = DIRECTION('',(0.,0.,1.)); +#67206 = ORIENTED_EDGE('',*,*,#67207,.T.); +#67207 = EDGE_CURVE('',#67198,#67208,#67210,.T.); +#67208 = VERTEX_POINT('',#67209); +#67209 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#67210 = LINE('',#67211,#67212); +#67211 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#67212 = VECTOR('',#67213,1.); +#67213 = DIRECTION('',(0.,1.,0.)); +#67214 = ORIENTED_EDGE('',*,*,#67215,.T.); +#67215 = EDGE_CURVE('',#67208,#67216,#67218,.T.); +#67216 = VERTEX_POINT('',#67217); +#67217 = CARTESIAN_POINT('',(-1.05,-2.01,0.4)); +#67218 = LINE('',#67219,#67220); +#67219 = CARTESIAN_POINT('',(-1.05,-2.01,0.)); +#67220 = VECTOR('',#67221,1.); +#67221 = DIRECTION('',(0.,0.,1.)); +#67222 = ORIENTED_EDGE('',*,*,#67223,.F.); +#67223 = EDGE_CURVE('',#67200,#67216,#67224,.T.); +#67224 = LINE('',#67225,#67226); +#67225 = CARTESIAN_POINT('',(-1.05,-2.91,0.4)); +#67226 = VECTOR('',#67227,1.); +#67227 = DIRECTION('',(0.,1.,0.)); +#67228 = PLANE('',#67229); +#67229 = AXIS2_PLACEMENT_3D('',#67230,#67231,#67232); +#67230 = CARTESIAN_POINT('',(-1.05,-2.91,0.)); +#67231 = DIRECTION('',(1.,0.,0.)); +#67232 = DIRECTION('',(0.,0.,1.)); +#67233 = ADVANCED_FACE('',(#67234),#67250,.F.); +#67234 = FACE_BOUND('',#67235,.F.); +#67235 = EDGE_LOOP('',(#67236,#67242,#67243,#67249)); +#67236 = ORIENTED_EDGE('',*,*,#67237,.F.); +#67237 = EDGE_CURVE('',#67158,#67198,#67238,.T.); +#67238 = LINE('',#67239,#67240); +#67239 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67240 = VECTOR('',#67241,1.); +#67241 = DIRECTION('',(1.,0.,0.)); +#67242 = ORIENTED_EDGE('',*,*,#67157,.T.); +#67243 = ORIENTED_EDGE('',*,*,#67244,.T.); +#67244 = EDGE_CURVE('',#67160,#67200,#67245,.T.); +#67245 = LINE('',#67246,#67247); +#67246 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#67247 = VECTOR('',#67248,1.); +#67248 = DIRECTION('',(1.,0.,0.)); +#67249 = ORIENTED_EDGE('',*,*,#67197,.F.); +#67250 = PLANE('',#67251); +#67251 = AXIS2_PLACEMENT_3D('',#67252,#67253,#67254); +#67252 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67253 = DIRECTION('',(0.,1.,0.)); +#67254 = DIRECTION('',(0.,-0.,1.)); +#67255 = ADVANCED_FACE('',(#67256),#67272,.T.); +#67256 = FACE_BOUND('',#67257,.T.); +#67257 = EDGE_LOOP('',(#67258,#67264,#67265,#67271)); +#67258 = ORIENTED_EDGE('',*,*,#67259,.F.); +#67259 = EDGE_CURVE('',#67168,#67208,#67260,.T.); +#67260 = LINE('',#67261,#67262); +#67261 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#67262 = VECTOR('',#67263,1.); +#67263 = DIRECTION('',(1.,0.,0.)); +#67264 = ORIENTED_EDGE('',*,*,#67175,.T.); +#67265 = ORIENTED_EDGE('',*,*,#67266,.T.); +#67266 = EDGE_CURVE('',#67176,#67216,#67267,.T.); +#67267 = LINE('',#67268,#67269); +#67268 = CARTESIAN_POINT('',(-1.95,-2.01,0.4)); +#67269 = VECTOR('',#67270,1.); +#67270 = DIRECTION('',(1.,0.,0.)); +#67271 = ORIENTED_EDGE('',*,*,#67215,.F.); +#67272 = PLANE('',#67273); +#67273 = AXIS2_PLACEMENT_3D('',#67274,#67275,#67276); +#67274 = CARTESIAN_POINT('',(-1.95,-2.01,0.)); +#67275 = DIRECTION('',(0.,1.,0.)); +#67276 = DIRECTION('',(0.,-0.,1.)); +#67277 = ADVANCED_FACE('',(#67278),#67284,.F.); +#67278 = FACE_BOUND('',#67279,.F.); +#67279 = EDGE_LOOP('',(#67280,#67281,#67282,#67283)); +#67280 = ORIENTED_EDGE('',*,*,#67167,.F.); +#67281 = ORIENTED_EDGE('',*,*,#67237,.T.); +#67282 = ORIENTED_EDGE('',*,*,#67207,.T.); +#67283 = ORIENTED_EDGE('',*,*,#67259,.F.); +#67284 = PLANE('',#67285); +#67285 = AXIS2_PLACEMENT_3D('',#67286,#67287,#67288); +#67286 = CARTESIAN_POINT('',(-1.95,-2.91,0.)); +#67287 = DIRECTION('',(0.,0.,1.)); +#67288 = DIRECTION('',(1.,0.,-0.)); +#67289 = ADVANCED_FACE('',(#67290),#67296,.T.); +#67290 = FACE_BOUND('',#67291,.T.); +#67291 = EDGE_LOOP('',(#67292,#67293,#67294,#67295)); +#67292 = ORIENTED_EDGE('',*,*,#67183,.F.); +#67293 = ORIENTED_EDGE('',*,*,#67244,.T.); +#67294 = ORIENTED_EDGE('',*,*,#67223,.T.); +#67295 = ORIENTED_EDGE('',*,*,#67266,.F.); +#67296 = PLANE('',#67297); +#67297 = AXIS2_PLACEMENT_3D('',#67298,#67299,#67300); +#67298 = CARTESIAN_POINT('',(-1.95,-2.91,0.4)); +#67299 = DIRECTION('',(0.,0.,1.)); +#67300 = DIRECTION('',(1.,0.,-0.)); +#67301 = MANIFOLD_SOLID_BREP('',#67302); +#67302 = CLOSED_SHELL('',(#67303,#67343,#67383,#67405,#67427,#67439)); +#67303 = ADVANCED_FACE('',(#67304),#67338,.F.); +#67304 = FACE_BOUND('',#67305,.F.); +#67305 = EDGE_LOOP('',(#67306,#67316,#67324,#67332)); +#67306 = ORIENTED_EDGE('',*,*,#67307,.F.); +#67307 = EDGE_CURVE('',#67308,#67310,#67312,.T.); +#67308 = VERTEX_POINT('',#67309); +#67309 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67310 = VERTEX_POINT('',#67311); +#67311 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#67312 = LINE('',#67313,#67314); +#67313 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67314 = VECTOR('',#67315,1.); +#67315 = DIRECTION('',(0.,0.,1.)); +#67316 = ORIENTED_EDGE('',*,*,#67317,.T.); +#67317 = EDGE_CURVE('',#67308,#67318,#67320,.T.); +#67318 = VERTEX_POINT('',#67319); +#67319 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#67320 = LINE('',#67321,#67322); +#67321 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67322 = VECTOR('',#67323,1.); +#67323 = DIRECTION('',(0.,1.,0.)); +#67324 = ORIENTED_EDGE('',*,*,#67325,.T.); +#67325 = EDGE_CURVE('',#67318,#67326,#67328,.T.); +#67326 = VERTEX_POINT('',#67327); +#67327 = CARTESIAN_POINT('',(-0.55,-0.61,0.4)); +#67328 = LINE('',#67329,#67330); +#67329 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#67330 = VECTOR('',#67331,1.); +#67331 = DIRECTION('',(0.,0.,1.)); +#67332 = ORIENTED_EDGE('',*,*,#67333,.F.); +#67333 = EDGE_CURVE('',#67310,#67326,#67334,.T.); +#67334 = LINE('',#67335,#67336); +#67335 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#67336 = VECTOR('',#67337,1.); +#67337 = DIRECTION('',(0.,1.,0.)); +#67338 = PLANE('',#67339); +#67339 = AXIS2_PLACEMENT_3D('',#67340,#67341,#67342); +#67340 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67341 = DIRECTION('',(1.,0.,0.)); +#67342 = DIRECTION('',(0.,0.,1.)); +#67343 = ADVANCED_FACE('',(#67344),#67378,.T.); +#67344 = FACE_BOUND('',#67345,.T.); +#67345 = EDGE_LOOP('',(#67346,#67356,#67364,#67372)); +#67346 = ORIENTED_EDGE('',*,*,#67347,.F.); +#67347 = EDGE_CURVE('',#67348,#67350,#67352,.T.); +#67348 = VERTEX_POINT('',#67349); +#67349 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#67350 = VERTEX_POINT('',#67351); +#67351 = CARTESIAN_POINT('',(0.35,-1.51,0.4)); +#67352 = LINE('',#67353,#67354); +#67353 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#67354 = VECTOR('',#67355,1.); +#67355 = DIRECTION('',(0.,0.,1.)); +#67356 = ORIENTED_EDGE('',*,*,#67357,.T.); +#67357 = EDGE_CURVE('',#67348,#67358,#67360,.T.); +#67358 = VERTEX_POINT('',#67359); +#67359 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#67360 = LINE('',#67361,#67362); +#67361 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#67362 = VECTOR('',#67363,1.); +#67363 = DIRECTION('',(0.,1.,0.)); +#67364 = ORIENTED_EDGE('',*,*,#67365,.T.); +#67365 = EDGE_CURVE('',#67358,#67366,#67368,.T.); +#67366 = VERTEX_POINT('',#67367); +#67367 = CARTESIAN_POINT('',(0.35,-0.61,0.4)); +#67368 = LINE('',#67369,#67370); +#67369 = CARTESIAN_POINT('',(0.35,-0.61,0.)); +#67370 = VECTOR('',#67371,1.); +#67371 = DIRECTION('',(0.,0.,1.)); +#67372 = ORIENTED_EDGE('',*,*,#67373,.F.); +#67373 = EDGE_CURVE('',#67350,#67366,#67374,.T.); +#67374 = LINE('',#67375,#67376); +#67375 = CARTESIAN_POINT('',(0.35,-1.51,0.4)); +#67376 = VECTOR('',#67377,1.); +#67377 = DIRECTION('',(0.,1.,0.)); +#67378 = PLANE('',#67379); +#67379 = AXIS2_PLACEMENT_3D('',#67380,#67381,#67382); +#67380 = CARTESIAN_POINT('',(0.35,-1.51,0.)); +#67381 = DIRECTION('',(1.,0.,0.)); +#67382 = DIRECTION('',(0.,0.,1.)); +#67383 = ADVANCED_FACE('',(#67384),#67400,.F.); +#67384 = FACE_BOUND('',#67385,.F.); +#67385 = EDGE_LOOP('',(#67386,#67392,#67393,#67399)); +#67386 = ORIENTED_EDGE('',*,*,#67387,.F.); +#67387 = EDGE_CURVE('',#67308,#67348,#67388,.T.); +#67388 = LINE('',#67389,#67390); +#67389 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67390 = VECTOR('',#67391,1.); +#67391 = DIRECTION('',(1.,0.,0.)); +#67392 = ORIENTED_EDGE('',*,*,#67307,.T.); +#67393 = ORIENTED_EDGE('',*,*,#67394,.T.); +#67394 = EDGE_CURVE('',#67310,#67350,#67395,.T.); +#67395 = LINE('',#67396,#67397); +#67396 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#67397 = VECTOR('',#67398,1.); +#67398 = DIRECTION('',(1.,0.,0.)); +#67399 = ORIENTED_EDGE('',*,*,#67347,.F.); +#67400 = PLANE('',#67401); +#67401 = AXIS2_PLACEMENT_3D('',#67402,#67403,#67404); +#67402 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67403 = DIRECTION('',(0.,1.,0.)); +#67404 = DIRECTION('',(0.,-0.,1.)); +#67405 = ADVANCED_FACE('',(#67406),#67422,.T.); +#67406 = FACE_BOUND('',#67407,.T.); +#67407 = EDGE_LOOP('',(#67408,#67414,#67415,#67421)); +#67408 = ORIENTED_EDGE('',*,*,#67409,.F.); +#67409 = EDGE_CURVE('',#67318,#67358,#67410,.T.); +#67410 = LINE('',#67411,#67412); +#67411 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#67412 = VECTOR('',#67413,1.); +#67413 = DIRECTION('',(1.,0.,0.)); +#67414 = ORIENTED_EDGE('',*,*,#67325,.T.); +#67415 = ORIENTED_EDGE('',*,*,#67416,.T.); +#67416 = EDGE_CURVE('',#67326,#67366,#67417,.T.); +#67417 = LINE('',#67418,#67419); +#67418 = CARTESIAN_POINT('',(-0.55,-0.61,0.4)); +#67419 = VECTOR('',#67420,1.); +#67420 = DIRECTION('',(1.,0.,0.)); +#67421 = ORIENTED_EDGE('',*,*,#67365,.F.); +#67422 = PLANE('',#67423); +#67423 = AXIS2_PLACEMENT_3D('',#67424,#67425,#67426); +#67424 = CARTESIAN_POINT('',(-0.55,-0.61,0.)); +#67425 = DIRECTION('',(0.,1.,0.)); +#67426 = DIRECTION('',(0.,-0.,1.)); +#67427 = ADVANCED_FACE('',(#67428),#67434,.F.); +#67428 = FACE_BOUND('',#67429,.F.); +#67429 = EDGE_LOOP('',(#67430,#67431,#67432,#67433)); +#67430 = ORIENTED_EDGE('',*,*,#67317,.F.); +#67431 = ORIENTED_EDGE('',*,*,#67387,.T.); +#67432 = ORIENTED_EDGE('',*,*,#67357,.T.); +#67433 = ORIENTED_EDGE('',*,*,#67409,.F.); +#67434 = PLANE('',#67435); +#67435 = AXIS2_PLACEMENT_3D('',#67436,#67437,#67438); +#67436 = CARTESIAN_POINT('',(-0.55,-1.51,0.)); +#67437 = DIRECTION('',(0.,0.,1.)); +#67438 = DIRECTION('',(1.,0.,-0.)); +#67439 = ADVANCED_FACE('',(#67440),#67446,.T.); +#67440 = FACE_BOUND('',#67441,.T.); +#67441 = EDGE_LOOP('',(#67442,#67443,#67444,#67445)); +#67442 = ORIENTED_EDGE('',*,*,#67333,.F.); +#67443 = ORIENTED_EDGE('',*,*,#67394,.T.); +#67444 = ORIENTED_EDGE('',*,*,#67373,.T.); +#67445 = ORIENTED_EDGE('',*,*,#67416,.F.); +#67446 = PLANE('',#67447); +#67447 = AXIS2_PLACEMENT_3D('',#67448,#67449,#67450); +#67448 = CARTESIAN_POINT('',(-0.55,-1.51,0.4)); +#67449 = DIRECTION('',(0.,0.,1.)); +#67450 = DIRECTION('',(1.,0.,-0.)); +#67451 = MANIFOLD_SOLID_BREP('',#67452); +#67452 = CLOSED_SHELL('',(#67453,#67493,#67533,#67555,#67577,#67589)); +#67453 = ADVANCED_FACE('',(#67454),#67488,.F.); +#67454 = FACE_BOUND('',#67455,.F.); +#67455 = EDGE_LOOP('',(#67456,#67466,#67474,#67482)); +#67456 = ORIENTED_EDGE('',*,*,#67457,.F.); +#67457 = EDGE_CURVE('',#67458,#67460,#67462,.T.); +#67458 = VERTEX_POINT('',#67459); +#67459 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67460 = VERTEX_POINT('',#67461); +#67461 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#67462 = LINE('',#67463,#67464); +#67463 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67464 = VECTOR('',#67465,1.); +#67465 = DIRECTION('',(0.,0.,1.)); +#67466 = ORIENTED_EDGE('',*,*,#67467,.T.); +#67467 = EDGE_CURVE('',#67458,#67468,#67470,.T.); +#67468 = VERTEX_POINT('',#67469); +#67469 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#67470 = LINE('',#67471,#67472); +#67471 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67472 = VECTOR('',#67473,1.); +#67473 = DIRECTION('',(0.,1.,0.)); +#67474 = ORIENTED_EDGE('',*,*,#67475,.T.); +#67475 = EDGE_CURVE('',#67468,#67476,#67478,.T.); +#67476 = VERTEX_POINT('',#67477); +#67477 = CARTESIAN_POINT('',(-1.95,-0.61,0.4)); +#67478 = LINE('',#67479,#67480); +#67479 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#67480 = VECTOR('',#67481,1.); +#67481 = DIRECTION('',(0.,0.,1.)); +#67482 = ORIENTED_EDGE('',*,*,#67483,.F.); +#67483 = EDGE_CURVE('',#67460,#67476,#67484,.T.); +#67484 = LINE('',#67485,#67486); +#67485 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#67486 = VECTOR('',#67487,1.); +#67487 = DIRECTION('',(0.,1.,0.)); +#67488 = PLANE('',#67489); +#67489 = AXIS2_PLACEMENT_3D('',#67490,#67491,#67492); +#67490 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67491 = DIRECTION('',(1.,0.,0.)); +#67492 = DIRECTION('',(0.,0.,1.)); +#67493 = ADVANCED_FACE('',(#67494),#67528,.T.); +#67494 = FACE_BOUND('',#67495,.T.); +#67495 = EDGE_LOOP('',(#67496,#67506,#67514,#67522)); +#67496 = ORIENTED_EDGE('',*,*,#67497,.F.); +#67497 = EDGE_CURVE('',#67498,#67500,#67502,.T.); +#67498 = VERTEX_POINT('',#67499); +#67499 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#67500 = VERTEX_POINT('',#67501); +#67501 = CARTESIAN_POINT('',(-1.05,-1.51,0.4)); +#67502 = LINE('',#67503,#67504); +#67503 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#67504 = VECTOR('',#67505,1.); +#67505 = DIRECTION('',(0.,0.,1.)); +#67506 = ORIENTED_EDGE('',*,*,#67507,.T.); +#67507 = EDGE_CURVE('',#67498,#67508,#67510,.T.); +#67508 = VERTEX_POINT('',#67509); +#67509 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#67510 = LINE('',#67511,#67512); +#67511 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#67512 = VECTOR('',#67513,1.); +#67513 = DIRECTION('',(0.,1.,0.)); +#67514 = ORIENTED_EDGE('',*,*,#67515,.T.); +#67515 = EDGE_CURVE('',#67508,#67516,#67518,.T.); +#67516 = VERTEX_POINT('',#67517); +#67517 = CARTESIAN_POINT('',(-1.05,-0.61,0.4)); +#67518 = LINE('',#67519,#67520); +#67519 = CARTESIAN_POINT('',(-1.05,-0.61,0.)); +#67520 = VECTOR('',#67521,1.); +#67521 = DIRECTION('',(0.,0.,1.)); +#67522 = ORIENTED_EDGE('',*,*,#67523,.F.); +#67523 = EDGE_CURVE('',#67500,#67516,#67524,.T.); +#67524 = LINE('',#67525,#67526); +#67525 = CARTESIAN_POINT('',(-1.05,-1.51,0.4)); +#67526 = VECTOR('',#67527,1.); +#67527 = DIRECTION('',(0.,1.,0.)); +#67528 = PLANE('',#67529); +#67529 = AXIS2_PLACEMENT_3D('',#67530,#67531,#67532); +#67530 = CARTESIAN_POINT('',(-1.05,-1.51,0.)); +#67531 = DIRECTION('',(1.,0.,0.)); +#67532 = DIRECTION('',(0.,0.,1.)); +#67533 = ADVANCED_FACE('',(#67534),#67550,.F.); +#67534 = FACE_BOUND('',#67535,.F.); +#67535 = EDGE_LOOP('',(#67536,#67542,#67543,#67549)); +#67536 = ORIENTED_EDGE('',*,*,#67537,.F.); +#67537 = EDGE_CURVE('',#67458,#67498,#67538,.T.); +#67538 = LINE('',#67539,#67540); +#67539 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67540 = VECTOR('',#67541,1.); +#67541 = DIRECTION('',(1.,0.,0.)); +#67542 = ORIENTED_EDGE('',*,*,#67457,.T.); +#67543 = ORIENTED_EDGE('',*,*,#67544,.T.); +#67544 = EDGE_CURVE('',#67460,#67500,#67545,.T.); +#67545 = LINE('',#67546,#67547); +#67546 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#67547 = VECTOR('',#67548,1.); +#67548 = DIRECTION('',(1.,0.,0.)); +#67549 = ORIENTED_EDGE('',*,*,#67497,.F.); +#67550 = PLANE('',#67551); +#67551 = AXIS2_PLACEMENT_3D('',#67552,#67553,#67554); +#67552 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67553 = DIRECTION('',(0.,1.,0.)); +#67554 = DIRECTION('',(0.,-0.,1.)); +#67555 = ADVANCED_FACE('',(#67556),#67572,.T.); +#67556 = FACE_BOUND('',#67557,.T.); +#67557 = EDGE_LOOP('',(#67558,#67564,#67565,#67571)); +#67558 = ORIENTED_EDGE('',*,*,#67559,.F.); +#67559 = EDGE_CURVE('',#67468,#67508,#67560,.T.); +#67560 = LINE('',#67561,#67562); +#67561 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#67562 = VECTOR('',#67563,1.); +#67563 = DIRECTION('',(1.,0.,0.)); +#67564 = ORIENTED_EDGE('',*,*,#67475,.T.); +#67565 = ORIENTED_EDGE('',*,*,#67566,.T.); +#67566 = EDGE_CURVE('',#67476,#67516,#67567,.T.); +#67567 = LINE('',#67568,#67569); +#67568 = CARTESIAN_POINT('',(-1.95,-0.61,0.4)); +#67569 = VECTOR('',#67570,1.); +#67570 = DIRECTION('',(1.,0.,0.)); +#67571 = ORIENTED_EDGE('',*,*,#67515,.F.); +#67572 = PLANE('',#67573); +#67573 = AXIS2_PLACEMENT_3D('',#67574,#67575,#67576); +#67574 = CARTESIAN_POINT('',(-1.95,-0.61,0.)); +#67575 = DIRECTION('',(0.,1.,0.)); +#67576 = DIRECTION('',(0.,-0.,1.)); +#67577 = ADVANCED_FACE('',(#67578),#67584,.F.); +#67578 = FACE_BOUND('',#67579,.F.); +#67579 = EDGE_LOOP('',(#67580,#67581,#67582,#67583)); +#67580 = ORIENTED_EDGE('',*,*,#67467,.F.); +#67581 = ORIENTED_EDGE('',*,*,#67537,.T.); +#67582 = ORIENTED_EDGE('',*,*,#67507,.T.); +#67583 = ORIENTED_EDGE('',*,*,#67559,.F.); +#67584 = PLANE('',#67585); +#67585 = AXIS2_PLACEMENT_3D('',#67586,#67587,#67588); +#67586 = CARTESIAN_POINT('',(-1.95,-1.51,0.)); +#67587 = DIRECTION('',(0.,0.,1.)); +#67588 = DIRECTION('',(1.,0.,-0.)); +#67589 = ADVANCED_FACE('',(#67590),#67596,.T.); +#67590 = FACE_BOUND('',#67591,.T.); +#67591 = EDGE_LOOP('',(#67592,#67593,#67594,#67595)); +#67592 = ORIENTED_EDGE('',*,*,#67483,.F.); +#67593 = ORIENTED_EDGE('',*,*,#67544,.T.); +#67594 = ORIENTED_EDGE('',*,*,#67523,.T.); +#67595 = ORIENTED_EDGE('',*,*,#67566,.F.); +#67596 = PLANE('',#67597); +#67597 = AXIS2_PLACEMENT_3D('',#67598,#67599,#67600); +#67598 = CARTESIAN_POINT('',(-1.95,-1.51,0.4)); +#67599 = DIRECTION('',(0.,0.,1.)); +#67600 = DIRECTION('',(1.,0.,-0.)); +#67601 = MANIFOLD_SOLID_BREP('',#67602); +#67602 = CLOSED_SHELL('',(#67603,#67643,#67683,#67705,#67727,#67739)); +#67603 = ADVANCED_FACE('',(#67604),#67638,.F.); +#67604 = FACE_BOUND('',#67605,.F.); +#67605 = EDGE_LOOP('',(#67606,#67616,#67624,#67632)); +#67606 = ORIENTED_EDGE('',*,*,#67607,.F.); +#67607 = EDGE_CURVE('',#67608,#67610,#67612,.T.); +#67608 = VERTEX_POINT('',#67609); +#67609 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67610 = VERTEX_POINT('',#67611); +#67611 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#67612 = LINE('',#67613,#67614); +#67613 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67614 = VECTOR('',#67615,1.); +#67615 = DIRECTION('',(0.,0.,1.)); +#67616 = ORIENTED_EDGE('',*,*,#67617,.T.); +#67617 = EDGE_CURVE('',#67608,#67618,#67620,.T.); +#67618 = VERTEX_POINT('',#67619); +#67619 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#67620 = LINE('',#67621,#67622); +#67621 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67622 = VECTOR('',#67623,1.); +#67623 = DIRECTION('',(0.,1.,0.)); +#67624 = ORIENTED_EDGE('',*,*,#67625,.T.); +#67625 = EDGE_CURVE('',#67618,#67626,#67628,.T.); +#67626 = VERTEX_POINT('',#67627); +#67627 = CARTESIAN_POINT('',(-3.35,-0.61,0.4)); +#67628 = LINE('',#67629,#67630); +#67629 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#67630 = VECTOR('',#67631,1.); +#67631 = DIRECTION('',(0.,0.,1.)); +#67632 = ORIENTED_EDGE('',*,*,#67633,.F.); +#67633 = EDGE_CURVE('',#67610,#67626,#67634,.T.); +#67634 = LINE('',#67635,#67636); +#67635 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#67636 = VECTOR('',#67637,1.); +#67637 = DIRECTION('',(0.,1.,0.)); +#67638 = PLANE('',#67639); +#67639 = AXIS2_PLACEMENT_3D('',#67640,#67641,#67642); +#67640 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67641 = DIRECTION('',(1.,0.,0.)); +#67642 = DIRECTION('',(0.,0.,1.)); +#67643 = ADVANCED_FACE('',(#67644),#67678,.T.); +#67644 = FACE_BOUND('',#67645,.T.); +#67645 = EDGE_LOOP('',(#67646,#67656,#67664,#67672)); +#67646 = ORIENTED_EDGE('',*,*,#67647,.F.); +#67647 = EDGE_CURVE('',#67648,#67650,#67652,.T.); +#67648 = VERTEX_POINT('',#67649); +#67649 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#67650 = VERTEX_POINT('',#67651); +#67651 = CARTESIAN_POINT('',(-2.45,-1.51,0.4)); +#67652 = LINE('',#67653,#67654); +#67653 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#67654 = VECTOR('',#67655,1.); +#67655 = DIRECTION('',(0.,0.,1.)); +#67656 = ORIENTED_EDGE('',*,*,#67657,.T.); +#67657 = EDGE_CURVE('',#67648,#67658,#67660,.T.); +#67658 = VERTEX_POINT('',#67659); +#67659 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#67660 = LINE('',#67661,#67662); +#67661 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#67662 = VECTOR('',#67663,1.); +#67663 = DIRECTION('',(0.,1.,0.)); +#67664 = ORIENTED_EDGE('',*,*,#67665,.T.); +#67665 = EDGE_CURVE('',#67658,#67666,#67668,.T.); +#67666 = VERTEX_POINT('',#67667); +#67667 = CARTESIAN_POINT('',(-2.45,-0.61,0.4)); +#67668 = LINE('',#67669,#67670); +#67669 = CARTESIAN_POINT('',(-2.45,-0.61,0.)); +#67670 = VECTOR('',#67671,1.); +#67671 = DIRECTION('',(0.,0.,1.)); +#67672 = ORIENTED_EDGE('',*,*,#67673,.F.); +#67673 = EDGE_CURVE('',#67650,#67666,#67674,.T.); +#67674 = LINE('',#67675,#67676); +#67675 = CARTESIAN_POINT('',(-2.45,-1.51,0.4)); +#67676 = VECTOR('',#67677,1.); +#67677 = DIRECTION('',(0.,1.,0.)); +#67678 = PLANE('',#67679); +#67679 = AXIS2_PLACEMENT_3D('',#67680,#67681,#67682); +#67680 = CARTESIAN_POINT('',(-2.45,-1.51,0.)); +#67681 = DIRECTION('',(1.,0.,0.)); +#67682 = DIRECTION('',(0.,0.,1.)); +#67683 = ADVANCED_FACE('',(#67684),#67700,.F.); +#67684 = FACE_BOUND('',#67685,.F.); +#67685 = EDGE_LOOP('',(#67686,#67692,#67693,#67699)); +#67686 = ORIENTED_EDGE('',*,*,#67687,.F.); +#67687 = EDGE_CURVE('',#67608,#67648,#67688,.T.); +#67688 = LINE('',#67689,#67690); +#67689 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67690 = VECTOR('',#67691,1.); +#67691 = DIRECTION('',(1.,0.,0.)); +#67692 = ORIENTED_EDGE('',*,*,#67607,.T.); +#67693 = ORIENTED_EDGE('',*,*,#67694,.T.); +#67694 = EDGE_CURVE('',#67610,#67650,#67695,.T.); +#67695 = LINE('',#67696,#67697); +#67696 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#67697 = VECTOR('',#67698,1.); +#67698 = DIRECTION('',(1.,0.,0.)); +#67699 = ORIENTED_EDGE('',*,*,#67647,.F.); +#67700 = PLANE('',#67701); +#67701 = AXIS2_PLACEMENT_3D('',#67702,#67703,#67704); +#67702 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67703 = DIRECTION('',(0.,1.,0.)); +#67704 = DIRECTION('',(0.,-0.,1.)); +#67705 = ADVANCED_FACE('',(#67706),#67722,.T.); +#67706 = FACE_BOUND('',#67707,.T.); +#67707 = EDGE_LOOP('',(#67708,#67714,#67715,#67721)); +#67708 = ORIENTED_EDGE('',*,*,#67709,.F.); +#67709 = EDGE_CURVE('',#67618,#67658,#67710,.T.); +#67710 = LINE('',#67711,#67712); +#67711 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#67712 = VECTOR('',#67713,1.); +#67713 = DIRECTION('',(1.,0.,0.)); +#67714 = ORIENTED_EDGE('',*,*,#67625,.T.); +#67715 = ORIENTED_EDGE('',*,*,#67716,.T.); +#67716 = EDGE_CURVE('',#67626,#67666,#67717,.T.); +#67717 = LINE('',#67718,#67719); +#67718 = CARTESIAN_POINT('',(-3.35,-0.61,0.4)); +#67719 = VECTOR('',#67720,1.); +#67720 = DIRECTION('',(1.,0.,0.)); +#67721 = ORIENTED_EDGE('',*,*,#67665,.F.); +#67722 = PLANE('',#67723); +#67723 = AXIS2_PLACEMENT_3D('',#67724,#67725,#67726); +#67724 = CARTESIAN_POINT('',(-3.35,-0.61,0.)); +#67725 = DIRECTION('',(0.,1.,0.)); +#67726 = DIRECTION('',(0.,-0.,1.)); +#67727 = ADVANCED_FACE('',(#67728),#67734,.F.); +#67728 = FACE_BOUND('',#67729,.F.); +#67729 = EDGE_LOOP('',(#67730,#67731,#67732,#67733)); +#67730 = ORIENTED_EDGE('',*,*,#67617,.F.); +#67731 = ORIENTED_EDGE('',*,*,#67687,.T.); +#67732 = ORIENTED_EDGE('',*,*,#67657,.T.); +#67733 = ORIENTED_EDGE('',*,*,#67709,.F.); +#67734 = PLANE('',#67735); +#67735 = AXIS2_PLACEMENT_3D('',#67736,#67737,#67738); +#67736 = CARTESIAN_POINT('',(-3.35,-1.51,0.)); +#67737 = DIRECTION('',(0.,0.,1.)); +#67738 = DIRECTION('',(1.,0.,-0.)); +#67739 = ADVANCED_FACE('',(#67740),#67746,.T.); +#67740 = FACE_BOUND('',#67741,.T.); +#67741 = EDGE_LOOP('',(#67742,#67743,#67744,#67745)); +#67742 = ORIENTED_EDGE('',*,*,#67633,.F.); +#67743 = ORIENTED_EDGE('',*,*,#67694,.T.); +#67744 = ORIENTED_EDGE('',*,*,#67673,.T.); +#67745 = ORIENTED_EDGE('',*,*,#67716,.F.); +#67746 = PLANE('',#67747); +#67747 = AXIS2_PLACEMENT_3D('',#67748,#67749,#67750); +#67748 = CARTESIAN_POINT('',(-3.35,-1.51,0.4)); +#67749 = DIRECTION('',(0.,0.,1.)); +#67750 = DIRECTION('',(1.,0.,-0.)); +#67751 = MANIFOLD_SOLID_BREP('',#67752); +#67752 = CLOSED_SHELL('',(#67753,#67793,#67833,#67855,#67877,#67889)); +#67753 = ADVANCED_FACE('',(#67754),#67788,.F.); +#67754 = FACE_BOUND('',#67755,.F.); +#67755 = EDGE_LOOP('',(#67756,#67766,#67774,#67782)); +#67756 = ORIENTED_EDGE('',*,*,#67757,.F.); +#67757 = EDGE_CURVE('',#67758,#67760,#67762,.T.); +#67758 = VERTEX_POINT('',#67759); +#67759 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67760 = VERTEX_POINT('',#67761); +#67761 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#67762 = LINE('',#67763,#67764); +#67763 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67764 = VECTOR('',#67765,1.); +#67765 = DIRECTION('',(0.,0.,1.)); +#67766 = ORIENTED_EDGE('',*,*,#67767,.T.); +#67767 = EDGE_CURVE('',#67758,#67768,#67770,.T.); +#67768 = VERTEX_POINT('',#67769); +#67769 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#67770 = LINE('',#67771,#67772); +#67771 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67772 = VECTOR('',#67773,1.); +#67773 = DIRECTION('',(0.,1.,0.)); +#67774 = ORIENTED_EDGE('',*,*,#67775,.T.); +#67775 = EDGE_CURVE('',#67768,#67776,#67778,.T.); +#67776 = VERTEX_POINT('',#67777); +#67777 = CARTESIAN_POINT('',(-0.55,-2.01,0.4)); +#67778 = LINE('',#67779,#67780); +#67779 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#67780 = VECTOR('',#67781,1.); +#67781 = DIRECTION('',(0.,0.,1.)); +#67782 = ORIENTED_EDGE('',*,*,#67783,.F.); +#67783 = EDGE_CURVE('',#67760,#67776,#67784,.T.); +#67784 = LINE('',#67785,#67786); +#67785 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#67786 = VECTOR('',#67787,1.); +#67787 = DIRECTION('',(0.,1.,0.)); +#67788 = PLANE('',#67789); +#67789 = AXIS2_PLACEMENT_3D('',#67790,#67791,#67792); +#67790 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67791 = DIRECTION('',(1.,0.,0.)); +#67792 = DIRECTION('',(0.,0.,1.)); +#67793 = ADVANCED_FACE('',(#67794),#67828,.T.); +#67794 = FACE_BOUND('',#67795,.T.); +#67795 = EDGE_LOOP('',(#67796,#67806,#67814,#67822)); +#67796 = ORIENTED_EDGE('',*,*,#67797,.F.); +#67797 = EDGE_CURVE('',#67798,#67800,#67802,.T.); +#67798 = VERTEX_POINT('',#67799); +#67799 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#67800 = VERTEX_POINT('',#67801); +#67801 = CARTESIAN_POINT('',(0.35,-2.91,0.4)); +#67802 = LINE('',#67803,#67804); +#67803 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#67804 = VECTOR('',#67805,1.); +#67805 = DIRECTION('',(0.,0.,1.)); +#67806 = ORIENTED_EDGE('',*,*,#67807,.T.); +#67807 = EDGE_CURVE('',#67798,#67808,#67810,.T.); +#67808 = VERTEX_POINT('',#67809); +#67809 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#67810 = LINE('',#67811,#67812); +#67811 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#67812 = VECTOR('',#67813,1.); +#67813 = DIRECTION('',(0.,1.,0.)); +#67814 = ORIENTED_EDGE('',*,*,#67815,.T.); +#67815 = EDGE_CURVE('',#67808,#67816,#67818,.T.); +#67816 = VERTEX_POINT('',#67817); +#67817 = CARTESIAN_POINT('',(0.35,-2.01,0.4)); +#67818 = LINE('',#67819,#67820); +#67819 = CARTESIAN_POINT('',(0.35,-2.01,0.)); +#67820 = VECTOR('',#67821,1.); +#67821 = DIRECTION('',(0.,0.,1.)); +#67822 = ORIENTED_EDGE('',*,*,#67823,.F.); +#67823 = EDGE_CURVE('',#67800,#67816,#67824,.T.); +#67824 = LINE('',#67825,#67826); +#67825 = CARTESIAN_POINT('',(0.35,-2.91,0.4)); +#67826 = VECTOR('',#67827,1.); +#67827 = DIRECTION('',(0.,1.,0.)); +#67828 = PLANE('',#67829); +#67829 = AXIS2_PLACEMENT_3D('',#67830,#67831,#67832); +#67830 = CARTESIAN_POINT('',(0.35,-2.91,0.)); +#67831 = DIRECTION('',(1.,0.,0.)); +#67832 = DIRECTION('',(0.,0.,1.)); +#67833 = ADVANCED_FACE('',(#67834),#67850,.F.); +#67834 = FACE_BOUND('',#67835,.F.); +#67835 = EDGE_LOOP('',(#67836,#67842,#67843,#67849)); +#67836 = ORIENTED_EDGE('',*,*,#67837,.F.); +#67837 = EDGE_CURVE('',#67758,#67798,#67838,.T.); +#67838 = LINE('',#67839,#67840); +#67839 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67840 = VECTOR('',#67841,1.); +#67841 = DIRECTION('',(1.,0.,0.)); +#67842 = ORIENTED_EDGE('',*,*,#67757,.T.); +#67843 = ORIENTED_EDGE('',*,*,#67844,.T.); +#67844 = EDGE_CURVE('',#67760,#67800,#67845,.T.); +#67845 = LINE('',#67846,#67847); +#67846 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#67847 = VECTOR('',#67848,1.); +#67848 = DIRECTION('',(1.,0.,0.)); +#67849 = ORIENTED_EDGE('',*,*,#67797,.F.); +#67850 = PLANE('',#67851); +#67851 = AXIS2_PLACEMENT_3D('',#67852,#67853,#67854); +#67852 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67853 = DIRECTION('',(0.,1.,0.)); +#67854 = DIRECTION('',(0.,-0.,1.)); +#67855 = ADVANCED_FACE('',(#67856),#67872,.T.); +#67856 = FACE_BOUND('',#67857,.T.); +#67857 = EDGE_LOOP('',(#67858,#67864,#67865,#67871)); +#67858 = ORIENTED_EDGE('',*,*,#67859,.F.); +#67859 = EDGE_CURVE('',#67768,#67808,#67860,.T.); +#67860 = LINE('',#67861,#67862); +#67861 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#67862 = VECTOR('',#67863,1.); +#67863 = DIRECTION('',(1.,0.,0.)); +#67864 = ORIENTED_EDGE('',*,*,#67775,.T.); +#67865 = ORIENTED_EDGE('',*,*,#67866,.T.); +#67866 = EDGE_CURVE('',#67776,#67816,#67867,.T.); +#67867 = LINE('',#67868,#67869); +#67868 = CARTESIAN_POINT('',(-0.55,-2.01,0.4)); +#67869 = VECTOR('',#67870,1.); +#67870 = DIRECTION('',(1.,0.,0.)); +#67871 = ORIENTED_EDGE('',*,*,#67815,.F.); +#67872 = PLANE('',#67873); +#67873 = AXIS2_PLACEMENT_3D('',#67874,#67875,#67876); +#67874 = CARTESIAN_POINT('',(-0.55,-2.01,0.)); +#67875 = DIRECTION('',(0.,1.,0.)); +#67876 = DIRECTION('',(0.,-0.,1.)); +#67877 = ADVANCED_FACE('',(#67878),#67884,.F.); +#67878 = FACE_BOUND('',#67879,.F.); +#67879 = EDGE_LOOP('',(#67880,#67881,#67882,#67883)); +#67880 = ORIENTED_EDGE('',*,*,#67767,.F.); +#67881 = ORIENTED_EDGE('',*,*,#67837,.T.); +#67882 = ORIENTED_EDGE('',*,*,#67807,.T.); +#67883 = ORIENTED_EDGE('',*,*,#67859,.F.); +#67884 = PLANE('',#67885); +#67885 = AXIS2_PLACEMENT_3D('',#67886,#67887,#67888); +#67886 = CARTESIAN_POINT('',(-0.55,-2.91,0.)); +#67887 = DIRECTION('',(0.,0.,1.)); +#67888 = DIRECTION('',(1.,0.,-0.)); +#67889 = ADVANCED_FACE('',(#67890),#67896,.T.); +#67890 = FACE_BOUND('',#67891,.T.); +#67891 = EDGE_LOOP('',(#67892,#67893,#67894,#67895)); +#67892 = ORIENTED_EDGE('',*,*,#67783,.F.); +#67893 = ORIENTED_EDGE('',*,*,#67844,.T.); +#67894 = ORIENTED_EDGE('',*,*,#67823,.T.); +#67895 = ORIENTED_EDGE('',*,*,#67866,.F.); +#67896 = PLANE('',#67897); +#67897 = AXIS2_PLACEMENT_3D('',#67898,#67899,#67900); +#67898 = CARTESIAN_POINT('',(-0.55,-2.91,0.4)); +#67899 = DIRECTION('',(0.,0.,1.)); +#67900 = DIRECTION('',(1.,0.,-0.)); +#67901 = MANIFOLD_SOLID_BREP('',#67902); +#67902 = CLOSED_SHELL('',(#67903,#67943,#67983,#68005,#68027,#68039)); +#67903 = ADVANCED_FACE('',(#67904),#67938,.F.); +#67904 = FACE_BOUND('',#67905,.F.); +#67905 = EDGE_LOOP('',(#67906,#67916,#67924,#67932)); +#67906 = ORIENTED_EDGE('',*,*,#67907,.F.); +#67907 = EDGE_CURVE('',#67908,#67910,#67912,.T.); +#67908 = VERTEX_POINT('',#67909); +#67909 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#67910 = VERTEX_POINT('',#67911); +#67911 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#67912 = LINE('',#67913,#67914); +#67913 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#67914 = VECTOR('',#67915,1.); +#67915 = DIRECTION('',(0.,0.,1.)); +#67916 = ORIENTED_EDGE('',*,*,#67917,.T.); +#67917 = EDGE_CURVE('',#67908,#67918,#67920,.T.); +#67918 = VERTEX_POINT('',#67919); +#67919 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#67920 = LINE('',#67921,#67922); +#67921 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#67922 = VECTOR('',#67923,1.); +#67923 = DIRECTION('',(0.,1.,0.)); +#67924 = ORIENTED_EDGE('',*,*,#67925,.T.); +#67925 = EDGE_CURVE('',#67918,#67926,#67928,.T.); +#67926 = VERTEX_POINT('',#67927); +#67927 = CARTESIAN_POINT('',(-3.35,-2.01,0.4)); +#67928 = LINE('',#67929,#67930); +#67929 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#67930 = VECTOR('',#67931,1.); +#67931 = DIRECTION('',(0.,0.,1.)); +#67932 = ORIENTED_EDGE('',*,*,#67933,.F.); +#67933 = EDGE_CURVE('',#67910,#67926,#67934,.T.); +#67934 = LINE('',#67935,#67936); +#67935 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#67936 = VECTOR('',#67937,1.); +#67937 = DIRECTION('',(0.,1.,0.)); +#67938 = PLANE('',#67939); +#67939 = AXIS2_PLACEMENT_3D('',#67940,#67941,#67942); +#67940 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#67941 = DIRECTION('',(1.,0.,0.)); +#67942 = DIRECTION('',(0.,0.,1.)); +#67943 = ADVANCED_FACE('',(#67944),#67978,.T.); +#67944 = FACE_BOUND('',#67945,.T.); +#67945 = EDGE_LOOP('',(#67946,#67956,#67964,#67972)); +#67946 = ORIENTED_EDGE('',*,*,#67947,.F.); +#67947 = EDGE_CURVE('',#67948,#67950,#67952,.T.); +#67948 = VERTEX_POINT('',#67949); +#67949 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#67950 = VERTEX_POINT('',#67951); +#67951 = CARTESIAN_POINT('',(-2.45,-2.91,0.4)); +#67952 = LINE('',#67953,#67954); +#67953 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#67954 = VECTOR('',#67955,1.); +#67955 = DIRECTION('',(0.,0.,1.)); +#67956 = ORIENTED_EDGE('',*,*,#67957,.T.); +#67957 = EDGE_CURVE('',#67948,#67958,#67960,.T.); +#67958 = VERTEX_POINT('',#67959); +#67959 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#67960 = LINE('',#67961,#67962); +#67961 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#67962 = VECTOR('',#67963,1.); +#67963 = DIRECTION('',(0.,1.,0.)); +#67964 = ORIENTED_EDGE('',*,*,#67965,.T.); +#67965 = EDGE_CURVE('',#67958,#67966,#67968,.T.); +#67966 = VERTEX_POINT('',#67967); +#67967 = CARTESIAN_POINT('',(-2.45,-2.01,0.4)); +#67968 = LINE('',#67969,#67970); +#67969 = CARTESIAN_POINT('',(-2.45,-2.01,0.)); +#67970 = VECTOR('',#67971,1.); +#67971 = DIRECTION('',(0.,0.,1.)); +#67972 = ORIENTED_EDGE('',*,*,#67973,.F.); +#67973 = EDGE_CURVE('',#67950,#67966,#67974,.T.); +#67974 = LINE('',#67975,#67976); +#67975 = CARTESIAN_POINT('',(-2.45,-2.91,0.4)); +#67976 = VECTOR('',#67977,1.); +#67977 = DIRECTION('',(0.,1.,0.)); +#67978 = PLANE('',#67979); +#67979 = AXIS2_PLACEMENT_3D('',#67980,#67981,#67982); +#67980 = CARTESIAN_POINT('',(-2.45,-2.91,0.)); +#67981 = DIRECTION('',(1.,0.,0.)); +#67982 = DIRECTION('',(0.,0.,1.)); +#67983 = ADVANCED_FACE('',(#67984),#68000,.F.); +#67984 = FACE_BOUND('',#67985,.F.); +#67985 = EDGE_LOOP('',(#67986,#67992,#67993,#67999)); +#67986 = ORIENTED_EDGE('',*,*,#67987,.F.); +#67987 = EDGE_CURVE('',#67908,#67948,#67988,.T.); +#67988 = LINE('',#67989,#67990); +#67989 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#67990 = VECTOR('',#67991,1.); +#67991 = DIRECTION('',(1.,0.,0.)); +#67992 = ORIENTED_EDGE('',*,*,#67907,.T.); +#67993 = ORIENTED_EDGE('',*,*,#67994,.T.); +#67994 = EDGE_CURVE('',#67910,#67950,#67995,.T.); +#67995 = LINE('',#67996,#67997); +#67996 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#67997 = VECTOR('',#67998,1.); +#67998 = DIRECTION('',(1.,0.,0.)); +#67999 = ORIENTED_EDGE('',*,*,#67947,.F.); +#68000 = PLANE('',#68001); +#68001 = AXIS2_PLACEMENT_3D('',#68002,#68003,#68004); +#68002 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#68003 = DIRECTION('',(0.,1.,0.)); +#68004 = DIRECTION('',(0.,-0.,1.)); +#68005 = ADVANCED_FACE('',(#68006),#68022,.T.); +#68006 = FACE_BOUND('',#68007,.T.); +#68007 = EDGE_LOOP('',(#68008,#68014,#68015,#68021)); +#68008 = ORIENTED_EDGE('',*,*,#68009,.F.); +#68009 = EDGE_CURVE('',#67918,#67958,#68010,.T.); +#68010 = LINE('',#68011,#68012); +#68011 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#68012 = VECTOR('',#68013,1.); +#68013 = DIRECTION('',(1.,0.,0.)); +#68014 = ORIENTED_EDGE('',*,*,#67925,.T.); +#68015 = ORIENTED_EDGE('',*,*,#68016,.T.); +#68016 = EDGE_CURVE('',#67926,#67966,#68017,.T.); +#68017 = LINE('',#68018,#68019); +#68018 = CARTESIAN_POINT('',(-3.35,-2.01,0.4)); +#68019 = VECTOR('',#68020,1.); +#68020 = DIRECTION('',(1.,0.,0.)); +#68021 = ORIENTED_EDGE('',*,*,#67965,.F.); +#68022 = PLANE('',#68023); +#68023 = AXIS2_PLACEMENT_3D('',#68024,#68025,#68026); +#68024 = CARTESIAN_POINT('',(-3.35,-2.01,0.)); +#68025 = DIRECTION('',(0.,1.,0.)); +#68026 = DIRECTION('',(0.,-0.,1.)); +#68027 = ADVANCED_FACE('',(#68028),#68034,.F.); +#68028 = FACE_BOUND('',#68029,.F.); +#68029 = EDGE_LOOP('',(#68030,#68031,#68032,#68033)); +#68030 = ORIENTED_EDGE('',*,*,#67917,.F.); +#68031 = ORIENTED_EDGE('',*,*,#67987,.T.); +#68032 = ORIENTED_EDGE('',*,*,#67957,.T.); +#68033 = ORIENTED_EDGE('',*,*,#68009,.F.); +#68034 = PLANE('',#68035); +#68035 = AXIS2_PLACEMENT_3D('',#68036,#68037,#68038); +#68036 = CARTESIAN_POINT('',(-3.35,-2.91,0.)); +#68037 = DIRECTION('',(0.,0.,1.)); +#68038 = DIRECTION('',(1.,0.,-0.)); +#68039 = ADVANCED_FACE('',(#68040),#68046,.T.); +#68040 = FACE_BOUND('',#68041,.T.); +#68041 = EDGE_LOOP('',(#68042,#68043,#68044,#68045)); +#68042 = ORIENTED_EDGE('',*,*,#67933,.F.); +#68043 = ORIENTED_EDGE('',*,*,#67994,.T.); +#68044 = ORIENTED_EDGE('',*,*,#67973,.T.); +#68045 = ORIENTED_EDGE('',*,*,#68016,.F.); +#68046 = PLANE('',#68047); +#68047 = AXIS2_PLACEMENT_3D('',#68048,#68049,#68050); +#68048 = CARTESIAN_POINT('',(-3.35,-2.91,0.4)); +#68049 = DIRECTION('',(0.,0.,1.)); +#68050 = DIRECTION('',(1.,0.,-0.)); +#68051 = MANIFOLD_SOLID_BREP('',#68052); +#68052 = CLOSED_SHELL('',(#68053,#68093,#68133,#68155,#68177,#68189)); +#68053 = ADVANCED_FACE('',(#68054),#68088,.F.); +#68054 = FACE_BOUND('',#68055,.F.); +#68055 = EDGE_LOOP('',(#68056,#68066,#68074,#68082)); +#68056 = ORIENTED_EDGE('',*,*,#68057,.F.); +#68057 = EDGE_CURVE('',#68058,#68060,#68062,.T.); +#68058 = VERTEX_POINT('',#68059); +#68059 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68060 = VERTEX_POINT('',#68061); +#68061 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#68062 = LINE('',#68063,#68064); +#68063 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68064 = VECTOR('',#68065,1.); +#68065 = DIRECTION('',(0.,0.,1.)); +#68066 = ORIENTED_EDGE('',*,*,#68067,.T.); +#68067 = EDGE_CURVE('',#68058,#68068,#68070,.T.); +#68068 = VERTEX_POINT('',#68069); +#68069 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#68070 = LINE('',#68071,#68072); +#68071 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68072 = VECTOR('',#68073,1.); +#68073 = DIRECTION('',(0.,1.,0.)); +#68074 = ORIENTED_EDGE('',*,*,#68075,.T.); +#68075 = EDGE_CURVE('',#68068,#68076,#68078,.T.); +#68076 = VERTEX_POINT('',#68077); +#68077 = CARTESIAN_POINT('',(-0.55,-3.41,0.4)); +#68078 = LINE('',#68079,#68080); +#68079 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#68080 = VECTOR('',#68081,1.); +#68081 = DIRECTION('',(0.,0.,1.)); +#68082 = ORIENTED_EDGE('',*,*,#68083,.F.); +#68083 = EDGE_CURVE('',#68060,#68076,#68084,.T.); +#68084 = LINE('',#68085,#68086); +#68085 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#68086 = VECTOR('',#68087,1.); +#68087 = DIRECTION('',(0.,1.,0.)); +#68088 = PLANE('',#68089); +#68089 = AXIS2_PLACEMENT_3D('',#68090,#68091,#68092); +#68090 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68091 = DIRECTION('',(1.,0.,0.)); +#68092 = DIRECTION('',(0.,0.,1.)); +#68093 = ADVANCED_FACE('',(#68094),#68128,.T.); +#68094 = FACE_BOUND('',#68095,.T.); +#68095 = EDGE_LOOP('',(#68096,#68106,#68114,#68122)); +#68096 = ORIENTED_EDGE('',*,*,#68097,.F.); +#68097 = EDGE_CURVE('',#68098,#68100,#68102,.T.); +#68098 = VERTEX_POINT('',#68099); +#68099 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#68100 = VERTEX_POINT('',#68101); +#68101 = CARTESIAN_POINT('',(0.35,-4.31,0.4)); +#68102 = LINE('',#68103,#68104); +#68103 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#68104 = VECTOR('',#68105,1.); +#68105 = DIRECTION('',(0.,0.,1.)); +#68106 = ORIENTED_EDGE('',*,*,#68107,.T.); +#68107 = EDGE_CURVE('',#68098,#68108,#68110,.T.); +#68108 = VERTEX_POINT('',#68109); +#68109 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#68110 = LINE('',#68111,#68112); +#68111 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#68112 = VECTOR('',#68113,1.); +#68113 = DIRECTION('',(0.,1.,0.)); +#68114 = ORIENTED_EDGE('',*,*,#68115,.T.); +#68115 = EDGE_CURVE('',#68108,#68116,#68118,.T.); +#68116 = VERTEX_POINT('',#68117); +#68117 = CARTESIAN_POINT('',(0.35,-3.41,0.4)); +#68118 = LINE('',#68119,#68120); +#68119 = CARTESIAN_POINT('',(0.35,-3.41,0.)); +#68120 = VECTOR('',#68121,1.); +#68121 = DIRECTION('',(0.,0.,1.)); +#68122 = ORIENTED_EDGE('',*,*,#68123,.F.); +#68123 = EDGE_CURVE('',#68100,#68116,#68124,.T.); +#68124 = LINE('',#68125,#68126); +#68125 = CARTESIAN_POINT('',(0.35,-4.31,0.4)); +#68126 = VECTOR('',#68127,1.); +#68127 = DIRECTION('',(0.,1.,0.)); +#68128 = PLANE('',#68129); +#68129 = AXIS2_PLACEMENT_3D('',#68130,#68131,#68132); +#68130 = CARTESIAN_POINT('',(0.35,-4.31,0.)); +#68131 = DIRECTION('',(1.,0.,0.)); +#68132 = DIRECTION('',(0.,0.,1.)); +#68133 = ADVANCED_FACE('',(#68134),#68150,.F.); +#68134 = FACE_BOUND('',#68135,.F.); +#68135 = EDGE_LOOP('',(#68136,#68142,#68143,#68149)); +#68136 = ORIENTED_EDGE('',*,*,#68137,.F.); +#68137 = EDGE_CURVE('',#68058,#68098,#68138,.T.); +#68138 = LINE('',#68139,#68140); +#68139 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68140 = VECTOR('',#68141,1.); +#68141 = DIRECTION('',(1.,0.,0.)); +#68142 = ORIENTED_EDGE('',*,*,#68057,.T.); +#68143 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68144 = EDGE_CURVE('',#68060,#68100,#68145,.T.); +#68145 = LINE('',#68146,#68147); +#68146 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#68147 = VECTOR('',#68148,1.); +#68148 = DIRECTION('',(1.,0.,0.)); +#68149 = ORIENTED_EDGE('',*,*,#68097,.F.); +#68150 = PLANE('',#68151); +#68151 = AXIS2_PLACEMENT_3D('',#68152,#68153,#68154); +#68152 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68153 = DIRECTION('',(0.,1.,0.)); +#68154 = DIRECTION('',(0.,-0.,1.)); +#68155 = ADVANCED_FACE('',(#68156),#68172,.T.); +#68156 = FACE_BOUND('',#68157,.T.); +#68157 = EDGE_LOOP('',(#68158,#68164,#68165,#68171)); +#68158 = ORIENTED_EDGE('',*,*,#68159,.F.); +#68159 = EDGE_CURVE('',#68068,#68108,#68160,.T.); +#68160 = LINE('',#68161,#68162); +#68161 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#68162 = VECTOR('',#68163,1.); +#68163 = DIRECTION('',(1.,0.,0.)); +#68164 = ORIENTED_EDGE('',*,*,#68075,.T.); +#68165 = ORIENTED_EDGE('',*,*,#68166,.T.); +#68166 = EDGE_CURVE('',#68076,#68116,#68167,.T.); +#68167 = LINE('',#68168,#68169); +#68168 = CARTESIAN_POINT('',(-0.55,-3.41,0.4)); +#68169 = VECTOR('',#68170,1.); +#68170 = DIRECTION('',(1.,0.,0.)); +#68171 = ORIENTED_EDGE('',*,*,#68115,.F.); +#68172 = PLANE('',#68173); +#68173 = AXIS2_PLACEMENT_3D('',#68174,#68175,#68176); +#68174 = CARTESIAN_POINT('',(-0.55,-3.41,0.)); +#68175 = DIRECTION('',(0.,1.,0.)); +#68176 = DIRECTION('',(0.,-0.,1.)); +#68177 = ADVANCED_FACE('',(#68178),#68184,.F.); +#68178 = FACE_BOUND('',#68179,.F.); +#68179 = EDGE_LOOP('',(#68180,#68181,#68182,#68183)); +#68180 = ORIENTED_EDGE('',*,*,#68067,.F.); +#68181 = ORIENTED_EDGE('',*,*,#68137,.T.); +#68182 = ORIENTED_EDGE('',*,*,#68107,.T.); +#68183 = ORIENTED_EDGE('',*,*,#68159,.F.); +#68184 = PLANE('',#68185); +#68185 = AXIS2_PLACEMENT_3D('',#68186,#68187,#68188); +#68186 = CARTESIAN_POINT('',(-0.55,-4.31,0.)); +#68187 = DIRECTION('',(0.,0.,1.)); +#68188 = DIRECTION('',(1.,0.,-0.)); +#68189 = ADVANCED_FACE('',(#68190),#68196,.T.); +#68190 = FACE_BOUND('',#68191,.T.); +#68191 = EDGE_LOOP('',(#68192,#68193,#68194,#68195)); +#68192 = ORIENTED_EDGE('',*,*,#68083,.F.); +#68193 = ORIENTED_EDGE('',*,*,#68144,.T.); +#68194 = ORIENTED_EDGE('',*,*,#68123,.T.); +#68195 = ORIENTED_EDGE('',*,*,#68166,.F.); +#68196 = PLANE('',#68197); +#68197 = AXIS2_PLACEMENT_3D('',#68198,#68199,#68200); +#68198 = CARTESIAN_POINT('',(-0.55,-4.31,0.4)); +#68199 = DIRECTION('',(0.,0.,1.)); +#68200 = DIRECTION('',(1.,0.,-0.)); +#68201 = MANIFOLD_SOLID_BREP('',#68202); +#68202 = CLOSED_SHELL('',(#68203,#68243,#68283,#68305,#68327,#68339)); +#68203 = ADVANCED_FACE('',(#68204),#68238,.F.); +#68204 = FACE_BOUND('',#68205,.F.); +#68205 = EDGE_LOOP('',(#68206,#68216,#68224,#68232)); +#68206 = ORIENTED_EDGE('',*,*,#68207,.F.); +#68207 = EDGE_CURVE('',#68208,#68210,#68212,.T.); +#68208 = VERTEX_POINT('',#68209); +#68209 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68210 = VERTEX_POINT('',#68211); +#68211 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#68212 = LINE('',#68213,#68214); +#68213 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68214 = VECTOR('',#68215,1.); +#68215 = DIRECTION('',(0.,0.,1.)); +#68216 = ORIENTED_EDGE('',*,*,#68217,.T.); +#68217 = EDGE_CURVE('',#68208,#68218,#68220,.T.); +#68218 = VERTEX_POINT('',#68219); +#68219 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#68220 = LINE('',#68221,#68222); +#68221 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68222 = VECTOR('',#68223,1.); +#68223 = DIRECTION('',(0.,1.,0.)); +#68224 = ORIENTED_EDGE('',*,*,#68225,.T.); +#68225 = EDGE_CURVE('',#68218,#68226,#68228,.T.); +#68226 = VERTEX_POINT('',#68227); +#68227 = CARTESIAN_POINT('',(-1.95,-3.41,0.4)); +#68228 = LINE('',#68229,#68230); +#68229 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#68230 = VECTOR('',#68231,1.); +#68231 = DIRECTION('',(0.,0.,1.)); +#68232 = ORIENTED_EDGE('',*,*,#68233,.F.); +#68233 = EDGE_CURVE('',#68210,#68226,#68234,.T.); +#68234 = LINE('',#68235,#68236); +#68235 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#68236 = VECTOR('',#68237,1.); +#68237 = DIRECTION('',(0.,1.,0.)); +#68238 = PLANE('',#68239); +#68239 = AXIS2_PLACEMENT_3D('',#68240,#68241,#68242); +#68240 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68241 = DIRECTION('',(1.,0.,0.)); +#68242 = DIRECTION('',(0.,0.,1.)); +#68243 = ADVANCED_FACE('',(#68244),#68278,.T.); +#68244 = FACE_BOUND('',#68245,.T.); +#68245 = EDGE_LOOP('',(#68246,#68256,#68264,#68272)); +#68246 = ORIENTED_EDGE('',*,*,#68247,.F.); +#68247 = EDGE_CURVE('',#68248,#68250,#68252,.T.); +#68248 = VERTEX_POINT('',#68249); +#68249 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#68250 = VERTEX_POINT('',#68251); +#68251 = CARTESIAN_POINT('',(-1.05,-4.31,0.4)); +#68252 = LINE('',#68253,#68254); +#68253 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#68254 = VECTOR('',#68255,1.); +#68255 = DIRECTION('',(0.,0.,1.)); +#68256 = ORIENTED_EDGE('',*,*,#68257,.T.); +#68257 = EDGE_CURVE('',#68248,#68258,#68260,.T.); +#68258 = VERTEX_POINT('',#68259); +#68259 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#68260 = LINE('',#68261,#68262); +#68261 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#68262 = VECTOR('',#68263,1.); +#68263 = DIRECTION('',(0.,1.,0.)); +#68264 = ORIENTED_EDGE('',*,*,#68265,.T.); +#68265 = EDGE_CURVE('',#68258,#68266,#68268,.T.); +#68266 = VERTEX_POINT('',#68267); +#68267 = CARTESIAN_POINT('',(-1.05,-3.41,0.4)); +#68268 = LINE('',#68269,#68270); +#68269 = CARTESIAN_POINT('',(-1.05,-3.41,0.)); +#68270 = VECTOR('',#68271,1.); +#68271 = DIRECTION('',(0.,0.,1.)); +#68272 = ORIENTED_EDGE('',*,*,#68273,.F.); +#68273 = EDGE_CURVE('',#68250,#68266,#68274,.T.); +#68274 = LINE('',#68275,#68276); +#68275 = CARTESIAN_POINT('',(-1.05,-4.31,0.4)); +#68276 = VECTOR('',#68277,1.); +#68277 = DIRECTION('',(0.,1.,0.)); +#68278 = PLANE('',#68279); +#68279 = AXIS2_PLACEMENT_3D('',#68280,#68281,#68282); +#68280 = CARTESIAN_POINT('',(-1.05,-4.31,0.)); +#68281 = DIRECTION('',(1.,0.,0.)); +#68282 = DIRECTION('',(0.,0.,1.)); +#68283 = ADVANCED_FACE('',(#68284),#68300,.F.); +#68284 = FACE_BOUND('',#68285,.F.); +#68285 = EDGE_LOOP('',(#68286,#68292,#68293,#68299)); +#68286 = ORIENTED_EDGE('',*,*,#68287,.F.); +#68287 = EDGE_CURVE('',#68208,#68248,#68288,.T.); +#68288 = LINE('',#68289,#68290); +#68289 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68290 = VECTOR('',#68291,1.); +#68291 = DIRECTION('',(1.,0.,0.)); +#68292 = ORIENTED_EDGE('',*,*,#68207,.T.); +#68293 = ORIENTED_EDGE('',*,*,#68294,.T.); +#68294 = EDGE_CURVE('',#68210,#68250,#68295,.T.); +#68295 = LINE('',#68296,#68297); +#68296 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#68297 = VECTOR('',#68298,1.); +#68298 = DIRECTION('',(1.,0.,0.)); +#68299 = ORIENTED_EDGE('',*,*,#68247,.F.); +#68300 = PLANE('',#68301); +#68301 = AXIS2_PLACEMENT_3D('',#68302,#68303,#68304); +#68302 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68303 = DIRECTION('',(0.,1.,0.)); +#68304 = DIRECTION('',(0.,-0.,1.)); +#68305 = ADVANCED_FACE('',(#68306),#68322,.T.); +#68306 = FACE_BOUND('',#68307,.T.); +#68307 = EDGE_LOOP('',(#68308,#68314,#68315,#68321)); +#68308 = ORIENTED_EDGE('',*,*,#68309,.F.); +#68309 = EDGE_CURVE('',#68218,#68258,#68310,.T.); +#68310 = LINE('',#68311,#68312); +#68311 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#68312 = VECTOR('',#68313,1.); +#68313 = DIRECTION('',(1.,0.,0.)); +#68314 = ORIENTED_EDGE('',*,*,#68225,.T.); +#68315 = ORIENTED_EDGE('',*,*,#68316,.T.); +#68316 = EDGE_CURVE('',#68226,#68266,#68317,.T.); +#68317 = LINE('',#68318,#68319); +#68318 = CARTESIAN_POINT('',(-1.95,-3.41,0.4)); +#68319 = VECTOR('',#68320,1.); +#68320 = DIRECTION('',(1.,0.,0.)); +#68321 = ORIENTED_EDGE('',*,*,#68265,.F.); +#68322 = PLANE('',#68323); +#68323 = AXIS2_PLACEMENT_3D('',#68324,#68325,#68326); +#68324 = CARTESIAN_POINT('',(-1.95,-3.41,0.)); +#68325 = DIRECTION('',(0.,1.,0.)); +#68326 = DIRECTION('',(0.,-0.,1.)); +#68327 = ADVANCED_FACE('',(#68328),#68334,.F.); +#68328 = FACE_BOUND('',#68329,.F.); +#68329 = EDGE_LOOP('',(#68330,#68331,#68332,#68333)); +#68330 = ORIENTED_EDGE('',*,*,#68217,.F.); +#68331 = ORIENTED_EDGE('',*,*,#68287,.T.); +#68332 = ORIENTED_EDGE('',*,*,#68257,.T.); +#68333 = ORIENTED_EDGE('',*,*,#68309,.F.); +#68334 = PLANE('',#68335); +#68335 = AXIS2_PLACEMENT_3D('',#68336,#68337,#68338); +#68336 = CARTESIAN_POINT('',(-1.95,-4.31,0.)); +#68337 = DIRECTION('',(0.,0.,1.)); +#68338 = DIRECTION('',(1.,0.,-0.)); +#68339 = ADVANCED_FACE('',(#68340),#68346,.T.); +#68340 = FACE_BOUND('',#68341,.T.); +#68341 = EDGE_LOOP('',(#68342,#68343,#68344,#68345)); +#68342 = ORIENTED_EDGE('',*,*,#68233,.F.); +#68343 = ORIENTED_EDGE('',*,*,#68294,.T.); +#68344 = ORIENTED_EDGE('',*,*,#68273,.T.); +#68345 = ORIENTED_EDGE('',*,*,#68316,.F.); +#68346 = PLANE('',#68347); +#68347 = AXIS2_PLACEMENT_3D('',#68348,#68349,#68350); +#68348 = CARTESIAN_POINT('',(-1.95,-4.31,0.4)); +#68349 = DIRECTION('',(0.,0.,1.)); +#68350 = DIRECTION('',(1.,0.,-0.)); +#68351 = MANIFOLD_SOLID_BREP('',#68352); +#68352 = CLOSED_SHELL('',(#68353,#68393,#68433,#68455,#68477,#68489)); +#68353 = ADVANCED_FACE('',(#68354),#68388,.F.); +#68354 = FACE_BOUND('',#68355,.F.); +#68355 = EDGE_LOOP('',(#68356,#68366,#68374,#68382)); +#68356 = ORIENTED_EDGE('',*,*,#68357,.F.); +#68357 = EDGE_CURVE('',#68358,#68360,#68362,.T.); +#68358 = VERTEX_POINT('',#68359); +#68359 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68360 = VERTEX_POINT('',#68361); +#68361 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#68362 = LINE('',#68363,#68364); +#68363 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68364 = VECTOR('',#68365,1.); +#68365 = DIRECTION('',(0.,0.,1.)); +#68366 = ORIENTED_EDGE('',*,*,#68367,.T.); +#68367 = EDGE_CURVE('',#68358,#68368,#68370,.T.); +#68368 = VERTEX_POINT('',#68369); +#68369 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#68370 = LINE('',#68371,#68372); +#68371 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68372 = VECTOR('',#68373,1.); +#68373 = DIRECTION('',(0.,1.,0.)); +#68374 = ORIENTED_EDGE('',*,*,#68375,.T.); +#68375 = EDGE_CURVE('',#68368,#68376,#68378,.T.); +#68376 = VERTEX_POINT('',#68377); +#68377 = CARTESIAN_POINT('',(-3.35,-3.41,0.4)); +#68378 = LINE('',#68379,#68380); +#68379 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#68380 = VECTOR('',#68381,1.); +#68381 = DIRECTION('',(0.,0.,1.)); +#68382 = ORIENTED_EDGE('',*,*,#68383,.F.); +#68383 = EDGE_CURVE('',#68360,#68376,#68384,.T.); +#68384 = LINE('',#68385,#68386); +#68385 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#68386 = VECTOR('',#68387,1.); +#68387 = DIRECTION('',(0.,1.,0.)); +#68388 = PLANE('',#68389); +#68389 = AXIS2_PLACEMENT_3D('',#68390,#68391,#68392); +#68390 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68391 = DIRECTION('',(1.,0.,0.)); +#68392 = DIRECTION('',(0.,0.,1.)); +#68393 = ADVANCED_FACE('',(#68394),#68428,.T.); +#68394 = FACE_BOUND('',#68395,.T.); +#68395 = EDGE_LOOP('',(#68396,#68406,#68414,#68422)); +#68396 = ORIENTED_EDGE('',*,*,#68397,.F.); +#68397 = EDGE_CURVE('',#68398,#68400,#68402,.T.); +#68398 = VERTEX_POINT('',#68399); +#68399 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#68400 = VERTEX_POINT('',#68401); +#68401 = CARTESIAN_POINT('',(-2.45,-4.31,0.4)); +#68402 = LINE('',#68403,#68404); +#68403 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#68404 = VECTOR('',#68405,1.); +#68405 = DIRECTION('',(0.,0.,1.)); +#68406 = ORIENTED_EDGE('',*,*,#68407,.T.); +#68407 = EDGE_CURVE('',#68398,#68408,#68410,.T.); +#68408 = VERTEX_POINT('',#68409); +#68409 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#68410 = LINE('',#68411,#68412); +#68411 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#68412 = VECTOR('',#68413,1.); +#68413 = DIRECTION('',(0.,1.,0.)); +#68414 = ORIENTED_EDGE('',*,*,#68415,.T.); +#68415 = EDGE_CURVE('',#68408,#68416,#68418,.T.); +#68416 = VERTEX_POINT('',#68417); +#68417 = CARTESIAN_POINT('',(-2.45,-3.41,0.4)); +#68418 = LINE('',#68419,#68420); +#68419 = CARTESIAN_POINT('',(-2.45,-3.41,0.)); +#68420 = VECTOR('',#68421,1.); +#68421 = DIRECTION('',(0.,0.,1.)); +#68422 = ORIENTED_EDGE('',*,*,#68423,.F.); +#68423 = EDGE_CURVE('',#68400,#68416,#68424,.T.); +#68424 = LINE('',#68425,#68426); +#68425 = CARTESIAN_POINT('',(-2.45,-4.31,0.4)); +#68426 = VECTOR('',#68427,1.); +#68427 = DIRECTION('',(0.,1.,0.)); +#68428 = PLANE('',#68429); +#68429 = AXIS2_PLACEMENT_3D('',#68430,#68431,#68432); +#68430 = CARTESIAN_POINT('',(-2.45,-4.31,0.)); +#68431 = DIRECTION('',(1.,0.,0.)); +#68432 = DIRECTION('',(0.,0.,1.)); +#68433 = ADVANCED_FACE('',(#68434),#68450,.F.); +#68434 = FACE_BOUND('',#68435,.F.); +#68435 = EDGE_LOOP('',(#68436,#68442,#68443,#68449)); +#68436 = ORIENTED_EDGE('',*,*,#68437,.F.); +#68437 = EDGE_CURVE('',#68358,#68398,#68438,.T.); +#68438 = LINE('',#68439,#68440); +#68439 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68440 = VECTOR('',#68441,1.); +#68441 = DIRECTION('',(1.,0.,0.)); +#68442 = ORIENTED_EDGE('',*,*,#68357,.T.); +#68443 = ORIENTED_EDGE('',*,*,#68444,.T.); +#68444 = EDGE_CURVE('',#68360,#68400,#68445,.T.); +#68445 = LINE('',#68446,#68447); +#68446 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#68447 = VECTOR('',#68448,1.); +#68448 = DIRECTION('',(1.,0.,0.)); +#68449 = ORIENTED_EDGE('',*,*,#68397,.F.); +#68450 = PLANE('',#68451); +#68451 = AXIS2_PLACEMENT_3D('',#68452,#68453,#68454); +#68452 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68453 = DIRECTION('',(0.,1.,0.)); +#68454 = DIRECTION('',(0.,-0.,1.)); +#68455 = ADVANCED_FACE('',(#68456),#68472,.T.); +#68456 = FACE_BOUND('',#68457,.T.); +#68457 = EDGE_LOOP('',(#68458,#68464,#68465,#68471)); +#68458 = ORIENTED_EDGE('',*,*,#68459,.F.); +#68459 = EDGE_CURVE('',#68368,#68408,#68460,.T.); +#68460 = LINE('',#68461,#68462); +#68461 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#68462 = VECTOR('',#68463,1.); +#68463 = DIRECTION('',(1.,0.,0.)); +#68464 = ORIENTED_EDGE('',*,*,#68375,.T.); +#68465 = ORIENTED_EDGE('',*,*,#68466,.T.); +#68466 = EDGE_CURVE('',#68376,#68416,#68467,.T.); +#68467 = LINE('',#68468,#68469); +#68468 = CARTESIAN_POINT('',(-3.35,-3.41,0.4)); +#68469 = VECTOR('',#68470,1.); +#68470 = DIRECTION('',(1.,0.,0.)); +#68471 = ORIENTED_EDGE('',*,*,#68415,.F.); +#68472 = PLANE('',#68473); +#68473 = AXIS2_PLACEMENT_3D('',#68474,#68475,#68476); +#68474 = CARTESIAN_POINT('',(-3.35,-3.41,0.)); +#68475 = DIRECTION('',(0.,1.,0.)); +#68476 = DIRECTION('',(0.,-0.,1.)); +#68477 = ADVANCED_FACE('',(#68478),#68484,.F.); +#68478 = FACE_BOUND('',#68479,.F.); +#68479 = EDGE_LOOP('',(#68480,#68481,#68482,#68483)); +#68480 = ORIENTED_EDGE('',*,*,#68367,.F.); +#68481 = ORIENTED_EDGE('',*,*,#68437,.T.); +#68482 = ORIENTED_EDGE('',*,*,#68407,.T.); +#68483 = ORIENTED_EDGE('',*,*,#68459,.F.); +#68484 = PLANE('',#68485); +#68485 = AXIS2_PLACEMENT_3D('',#68486,#68487,#68488); +#68486 = CARTESIAN_POINT('',(-3.35,-4.31,0.)); +#68487 = DIRECTION('',(0.,0.,1.)); +#68488 = DIRECTION('',(1.,0.,-0.)); +#68489 = ADVANCED_FACE('',(#68490),#68496,.T.); +#68490 = FACE_BOUND('',#68491,.T.); +#68491 = EDGE_LOOP('',(#68492,#68493,#68494,#68495)); +#68492 = ORIENTED_EDGE('',*,*,#68383,.F.); +#68493 = ORIENTED_EDGE('',*,*,#68444,.T.); +#68494 = ORIENTED_EDGE('',*,*,#68423,.T.); +#68495 = ORIENTED_EDGE('',*,*,#68466,.F.); +#68496 = PLANE('',#68497); +#68497 = AXIS2_PLACEMENT_3D('',#68498,#68499,#68500); +#68498 = CARTESIAN_POINT('',(-3.35,-4.31,0.4)); +#68499 = DIRECTION('',(0.,0.,1.)); +#68500 = DIRECTION('',(1.,0.,-0.)); +#68501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#68505)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#68502,#68503,#68504)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#68502 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#68503 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#68504 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#68505 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#68502, + 'distance_accuracy_value','confusion accuracy'); +#68506 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#68507,#68509); +#68507 = ( REPRESENTATION_RELATIONSHIP('','',#33401,#33378) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#68508) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#68508 = ITEM_DEFINED_TRANSFORMATION('','',#11,#33379); +#68509 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #68510); +#68510 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','=>[0:1:1:18]','',#33373, + #33396,$); +#68511 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33398)); +#68512 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#68513,#68515); +#68513 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#68514) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#68514 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#68515 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #68516); +#68516 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','SW_THR_UP1','',#5,#13558,$ + ); +#68517 = SHAPE_DEFINITION_REPRESENTATION(#68518,#68524); +#68518 = PRODUCT_DEFINITION_SHAPE('','',#68519); +#68519 = PRODUCT_DEFINITION('design','',#68520,#68523); +#68520 = PRODUCT_DEFINITION_FORMATION('','',#68521); +#68521 = PRODUCT('LED_WS2812B-Mini_PLCC4_3.5x3.5mm', + 'LED_WS2812B-Mini_PLCC4_3.5x3.5mm','',(#68522)); +#68522 = PRODUCT_CONTEXT('',#2,'mechanical'); +#68523 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#68524 = SHAPE_REPRESENTATION('',(#11,#68525),#68529); +#68525 = AXIS2_PLACEMENT_3D('',#68526,#68527,#68528); +#68526 = CARTESIAN_POINT('',(0.,0.,0.)); +#68527 = DIRECTION('',(0.,0.,1.)); +#68528 = DIRECTION('',(1.,0.,-0.)); +#68529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#68533)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#68530,#68531,#68532)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#68530 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#68531 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#68532 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#68533 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#68530, + 'distance_accuracy_value','confusion accuracy'); +#68534 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#68535,#68537); +#68535 = ( REPRESENTATION_RELATIONSHIP('','',#68524,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#68536) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#68536 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#68537 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #68538); +#68538 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','D_RGB1','',#5,#68519,$); +#68539 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#68521)); +#68540 = SHAPE_DEFINITION_REPRESENTATION(#68541,#68547); +#68541 = PRODUCT_DEFINITION_SHAPE('','',#68542); +#68542 = PRODUCT_DEFINITION('design','',#68543,#68546); +#68543 = PRODUCT_DEFINITION_FORMATION('','',#68544); +#68544 = PRODUCT('LED_WS2812B-Mini_PLCC4_3.5x3.5mm_P1.8mm', + 'LED_WS2812B-Mini_PLCC4_3.5x3.5mm_P1.8mm','',(#68545)); +#68545 = PRODUCT_CONTEXT('',#2,'mechanical'); +#68546 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#68547 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#68548),#70175); +#68548 = MANIFOLD_SOLID_BREP('',#68549); +#68549 = CLOSED_SHELL('',(#68550,#68567,#68592,#68617,#68668,#68701, + #68726,#68751,#68776,#68793,#68904,#68928,#68952,#68983,#69064, + #69075,#69307,#69367,#69391,#69444,#69504,#69528,#69581,#69641, + #69665,#69718,#69778,#69802,#69855,#69872,#69889,#69906,#69923, + #69945,#69957,#69974,#69986,#70008,#70020,#70037,#70049,#70071, + #70083,#70100,#70112,#70134,#70146,#70163)); +#68550 = ADVANCED_FACE('',(#68551),#68562,.T.); +#68551 = FACE_BOUND('',#68552,.T.); +#68552 = EDGE_LOOP('',(#68553)); +#68553 = ORIENTED_EDGE('',*,*,#68554,.T.); +#68554 = EDGE_CURVE('',#68555,#68555,#68557,.T.); +#68555 = VERTEX_POINT('',#68556); +#68556 = CARTESIAN_POINT('',(-1.153333333333,1.412425975017E-16,1.475)); +#68557 = CIRCLE('',#68558,1.153333333333); +#68558 = AXIS2_PLACEMENT_3D('',#68559,#68560,#68561); +#68559 = CARTESIAN_POINT('',(0.,0.,1.475)); +#68560 = DIRECTION('',(0.,0.,1.)); +#68561 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68562 = PLANE('',#68563); +#68563 = AXIS2_PLACEMENT_3D('',#68564,#68565,#68566); +#68564 = CARTESIAN_POINT('',(1.111539125077E-16,1.002956166465E-17,1.475 + )); +#68565 = DIRECTION('',(0.,0.,1.)); +#68566 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68567 = ADVANCED_FACE('',(#68568),#68587,.F.); +#68568 = FACE_BOUND('',#68569,.F.); +#68569 = EDGE_LOOP('',(#68570,#68578,#68585,#68586)); +#68570 = ORIENTED_EDGE('',*,*,#68571,.T.); +#68571 = EDGE_CURVE('',#68555,#68572,#68574,.T.); +#68572 = VERTEX_POINT('',#68573); +#68573 = CARTESIAN_POINT('',(-1.153333333333,1.412425975017E-16,1.56)); +#68574 = LINE('',#68575,#68576); +#68575 = CARTESIAN_POINT('',(-1.153333333333,1.412425975017E-16,1.05)); +#68576 = VECTOR('',#68577,1.); +#68577 = DIRECTION('',(0.,0.,1.)); +#68578 = ORIENTED_EDGE('',*,*,#68579,.T.); +#68579 = EDGE_CURVE('',#68572,#68572,#68580,.T.); +#68580 = CIRCLE('',#68581,1.153333333333); +#68581 = AXIS2_PLACEMENT_3D('',#68582,#68583,#68584); +#68582 = CARTESIAN_POINT('',(0.,0.,1.56)); +#68583 = DIRECTION('',(0.,0.,-1.)); +#68584 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68585 = ORIENTED_EDGE('',*,*,#68571,.F.); +#68586 = ORIENTED_EDGE('',*,*,#68554,.T.); +#68587 = CYLINDRICAL_SURFACE('',#68588,1.153333333333); +#68588 = AXIS2_PLACEMENT_3D('',#68589,#68590,#68591); +#68589 = CARTESIAN_POINT('',(0.,0.,1.05)); +#68590 = DIRECTION('',(0.,0.,-1.)); +#68591 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68592 = ADVANCED_FACE('',(#68593),#68612,.F.); +#68593 = FACE_BOUND('',#68594,.F.); +#68594 = EDGE_LOOP('',(#68595,#68603,#68610,#68611)); +#68595 = ORIENTED_EDGE('',*,*,#68596,.F.); +#68596 = EDGE_CURVE('',#68597,#68572,#68599,.T.); +#68597 = VERTEX_POINT('',#68598); +#68598 = CARTESIAN_POINT('',(-1.493333333333,1.828805886727E-16,1.9)); +#68599 = LINE('',#68600,#68601); +#68600 = CARTESIAN_POINT('',(-1.153333333333,1.412425975017E-16,1.56)); +#68601 = VECTOR('',#68602,1.); +#68602 = DIRECTION('',(0.707106781187,-8.659560562349E-17, + -0.707106781187)); +#68603 = ORIENTED_EDGE('',*,*,#68604,.T.); +#68604 = EDGE_CURVE('',#68597,#68597,#68605,.T.); +#68605 = CIRCLE('',#68606,1.493333333333); +#68606 = AXIS2_PLACEMENT_3D('',#68607,#68608,#68609); +#68607 = CARTESIAN_POINT('',(0.,0.,1.9)); +#68608 = DIRECTION('',(0.,0.,-1.)); +#68609 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68610 = ORIENTED_EDGE('',*,*,#68596,.T.); +#68611 = ORIENTED_EDGE('',*,*,#68579,.F.); +#68612 = CONICAL_SURFACE('',#68613,1.153333333333,0.785398163397); +#68613 = AXIS2_PLACEMENT_3D('',#68614,#68615,#68616); +#68614 = CARTESIAN_POINT('',(0.,0.,1.56)); +#68615 = DIRECTION('',(-0.,-0.,1.)); +#68616 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68617 = ADVANCED_FACE('',(#68618,#68621),#68663,.T.); +#68618 = FACE_BOUND('',#68619,.T.); +#68619 = EDGE_LOOP('',(#68620)); +#68620 = ORIENTED_EDGE('',*,*,#68604,.T.); +#68621 = FACE_BOUND('',#68622,.T.); +#68622 = EDGE_LOOP('',(#68623,#68633,#68641,#68649,#68657)); +#68623 = ORIENTED_EDGE('',*,*,#68624,.T.); +#68624 = EDGE_CURVE('',#68625,#68627,#68629,.T.); +#68625 = VERTEX_POINT('',#68626); +#68626 = CARTESIAN_POINT('',(1.645,-0.978202384293,1.9)); +#68627 = VERTEX_POINT('',#68628); +#68628 = CARTESIAN_POINT('',(1.645,1.645,1.9)); +#68629 = LINE('',#68630,#68631); +#68630 = CARTESIAN_POINT('',(1.645,-1.013410537095,1.9)); +#68631 = VECTOR('',#68632,1.); +#68632 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68633 = ORIENTED_EDGE('',*,*,#68634,.T.); +#68634 = EDGE_CURVE('',#68627,#68635,#68637,.T.); +#68635 = VERTEX_POINT('',#68636); +#68636 = CARTESIAN_POINT('',(-1.645,1.645,1.9)); +#68637 = LINE('',#68638,#68639); +#68638 = CARTESIAN_POINT('',(1.73,1.645,1.9)); +#68639 = VECTOR('',#68640,1.); +#68640 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68641 = ORIENTED_EDGE('',*,*,#68642,.T.); +#68642 = EDGE_CURVE('',#68635,#68643,#68645,.T.); +#68643 = VERTEX_POINT('',#68644); +#68644 = CARTESIAN_POINT('',(-1.645,-1.645,1.9)); +#68645 = LINE('',#68646,#68647); +#68646 = CARTESIAN_POINT('',(-1.645,1.73,1.9)); +#68647 = VECTOR('',#68648,1.); +#68648 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#68649 = ORIENTED_EDGE('',*,*,#68650,.T.); +#68650 = EDGE_CURVE('',#68643,#68651,#68653,.T.); +#68651 = VERTEX_POINT('',#68652); +#68652 = CARTESIAN_POINT('',(0.978202384293,-1.645,1.9)); +#68653 = LINE('',#68654,#68655); +#68654 = CARTESIAN_POINT('',(-1.73,-1.645,1.9)); +#68655 = VECTOR('',#68656,1.); +#68656 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68657 = ORIENTED_EDGE('',*,*,#68658,.T.); +#68658 = EDGE_CURVE('',#68651,#68625,#68659,.T.); +#68659 = LINE('',#68660,#68661); +#68660 = CARTESIAN_POINT('',(0.953306460694,-1.669895923599,1.9)); +#68661 = VECTOR('',#68662,1.); +#68662 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68663 = PLANE('',#68664); +#68664 = AXIS2_PLACEMENT_3D('',#68665,#68666,#68667); +#68665 = CARTESIAN_POINT('',(6.417474130781E-17,-6.417474130781E-17,1.9) + ); +#68666 = DIRECTION('',(0.,0.,1.)); +#68667 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68668 = ADVANCED_FACE('',(#68669),#68696,.T.); +#68669 = FACE_BOUND('',#68670,.T.); +#68670 = EDGE_LOOP('',(#68671,#68681,#68688,#68689)); +#68671 = ORIENTED_EDGE('',*,*,#68672,.T.); +#68672 = EDGE_CURVE('',#68673,#68675,#68677,.T.); +#68673 = VERTEX_POINT('',#68674); +#68674 = CARTESIAN_POINT('',(1.73,-1.013410537095,1.815)); +#68675 = VERTEX_POINT('',#68676); +#68676 = CARTESIAN_POINT('',(1.73,1.73,1.815)); +#68677 = LINE('',#68678,#68679); +#68678 = CARTESIAN_POINT('',(1.73,-1.013410537095,1.815)); +#68679 = VECTOR('',#68680,1.); +#68680 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68681 = ORIENTED_EDGE('',*,*,#68682,.T.); +#68682 = EDGE_CURVE('',#68675,#68627,#68683,.T.); +#68683 = ELLIPSE('',#68684,0.120208152802,8.5E-02); +#68684 = AXIS2_PLACEMENT_3D('',#68685,#68686,#68687); +#68685 = CARTESIAN_POINT('',(1.645,1.645,1.815)); +#68686 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#68687 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68688 = ORIENTED_EDGE('',*,*,#68624,.F.); +#68689 = ORIENTED_EDGE('',*,*,#68690,.F.); +#68690 = EDGE_CURVE('',#68673,#68625,#68691,.T.); +#68691 = ELLIPSE('',#68692,9.200333702485E-02,8.5E-02); +#68692 = AXIS2_PLACEMENT_3D('',#68693,#68694,#68695); +#68693 = CARTESIAN_POINT('',(1.645,-0.978202384293,1.815)); +#68694 = DIRECTION('',(-0.382683432365,-0.923879532511,-0.)); +#68695 = DIRECTION('',(-0.923879532511,0.382683432365,0.)); +#68696 = CYLINDRICAL_SURFACE('',#68697,8.5E-02); +#68697 = AXIS2_PLACEMENT_3D('',#68698,#68699,#68700); +#68698 = CARTESIAN_POINT('',(1.645,-1.013410537095,1.815)); +#68699 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68700 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68701 = ADVANCED_FACE('',(#68702),#68721,.T.); +#68702 = FACE_BOUND('',#68703,.T.); +#68703 = EDGE_LOOP('',(#68704,#68713,#68719,#68720)); +#68704 = ORIENTED_EDGE('',*,*,#68705,.T.); +#68705 = EDGE_CURVE('',#68651,#68706,#68708,.T.); +#68706 = VERTEX_POINT('',#68707); +#68707 = CARTESIAN_POINT('',(1.013410537095,-1.73,1.815)); +#68708 = ELLIPSE('',#68709,9.200333702485E-02,8.5E-02); +#68709 = AXIS2_PLACEMENT_3D('',#68710,#68711,#68712); +#68710 = CARTESIAN_POINT('',(0.978202384293,-1.645,1.815)); +#68711 = DIRECTION('',(0.923879532511,0.382683432365,-0.)); +#68712 = DIRECTION('',(-0.382683432365,0.923879532511,0.)); +#68713 = ORIENTED_EDGE('',*,*,#68714,.T.); +#68714 = EDGE_CURVE('',#68706,#68673,#68715,.T.); +#68715 = LINE('',#68716,#68717); +#68716 = CARTESIAN_POINT('',(1.013410537095,-1.73,1.815)); +#68717 = VECTOR('',#68718,1.); +#68718 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68719 = ORIENTED_EDGE('',*,*,#68690,.T.); +#68720 = ORIENTED_EDGE('',*,*,#68658,.F.); +#68721 = CYLINDRICAL_SURFACE('',#68722,8.5E-02); +#68722 = AXIS2_PLACEMENT_3D('',#68723,#68724,#68725); +#68723 = CARTESIAN_POINT('',(0.953306460694,-1.669895923599,1.815)); +#68724 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68725 = DIRECTION('',(0.,-0.,1.)); +#68726 = ADVANCED_FACE('',(#68727),#68746,.T.); +#68727 = FACE_BOUND('',#68728,.T.); +#68728 = EDGE_LOOP('',(#68729,#68737,#68744,#68745)); +#68729 = ORIENTED_EDGE('',*,*,#68730,.T.); +#68730 = EDGE_CURVE('',#68675,#68731,#68733,.T.); +#68731 = VERTEX_POINT('',#68732); +#68732 = CARTESIAN_POINT('',(-1.73,1.73,1.815)); +#68733 = LINE('',#68734,#68735); +#68734 = CARTESIAN_POINT('',(1.73,1.73,1.815)); +#68735 = VECTOR('',#68736,1.); +#68736 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68737 = ORIENTED_EDGE('',*,*,#68738,.T.); +#68738 = EDGE_CURVE('',#68731,#68635,#68739,.T.); +#68739 = ELLIPSE('',#68740,0.120208152802,8.5E-02); +#68740 = AXIS2_PLACEMENT_3D('',#68741,#68742,#68743); +#68741 = CARTESIAN_POINT('',(-1.645,1.645,1.815)); +#68742 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68743 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#68744 = ORIENTED_EDGE('',*,*,#68634,.F.); +#68745 = ORIENTED_EDGE('',*,*,#68682,.F.); +#68746 = CYLINDRICAL_SURFACE('',#68747,8.5E-02); +#68747 = AXIS2_PLACEMENT_3D('',#68748,#68749,#68750); +#68748 = CARTESIAN_POINT('',(1.73,1.645,1.815)); +#68749 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68750 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68751 = ADVANCED_FACE('',(#68752),#68771,.T.); +#68752 = FACE_BOUND('',#68753,.T.); +#68753 = EDGE_LOOP('',(#68754,#68763,#68769,#68770)); +#68754 = ORIENTED_EDGE('',*,*,#68755,.T.); +#68755 = EDGE_CURVE('',#68643,#68756,#68758,.T.); +#68756 = VERTEX_POINT('',#68757); +#68757 = CARTESIAN_POINT('',(-1.73,-1.73,1.815)); +#68758 = ELLIPSE('',#68759,0.120208152802,8.5E-02); +#68759 = AXIS2_PLACEMENT_3D('',#68760,#68761,#68762); +#68760 = CARTESIAN_POINT('',(-1.645,-1.645,1.815)); +#68761 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#68762 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#68763 = ORIENTED_EDGE('',*,*,#68764,.T.); +#68764 = EDGE_CURVE('',#68756,#68706,#68765,.T.); +#68765 = LINE('',#68766,#68767); +#68766 = CARTESIAN_POINT('',(-1.73,-1.73,1.815)); +#68767 = VECTOR('',#68768,1.); +#68768 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68769 = ORIENTED_EDGE('',*,*,#68705,.F.); +#68770 = ORIENTED_EDGE('',*,*,#68650,.F.); +#68771 = CYLINDRICAL_SURFACE('',#68772,8.5E-02); +#68772 = AXIS2_PLACEMENT_3D('',#68773,#68774,#68775); +#68773 = CARTESIAN_POINT('',(-1.73,-1.645,1.815)); +#68774 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68775 = DIRECTION('',(0.,0.,1.)); +#68776 = ADVANCED_FACE('',(#68777),#68788,.T.); +#68777 = FACE_BOUND('',#68778,.T.); +#68778 = EDGE_LOOP('',(#68779,#68785,#68786,#68787)); +#68779 = ORIENTED_EDGE('',*,*,#68780,.T.); +#68780 = EDGE_CURVE('',#68731,#68756,#68781,.T.); +#68781 = LINE('',#68782,#68783); +#68782 = CARTESIAN_POINT('',(-1.73,1.73,1.815)); +#68783 = VECTOR('',#68784,1.); +#68784 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#68785 = ORIENTED_EDGE('',*,*,#68755,.F.); +#68786 = ORIENTED_EDGE('',*,*,#68642,.F.); +#68787 = ORIENTED_EDGE('',*,*,#68738,.F.); +#68788 = CYLINDRICAL_SURFACE('',#68789,8.5E-02); +#68789 = AXIS2_PLACEMENT_3D('',#68790,#68791,#68792); +#68790 = CARTESIAN_POINT('',(-1.645,1.73,1.815)); +#68791 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#68792 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68793 = ADVANCED_FACE('',(#68794),#68899,.F.); +#68794 = FACE_BOUND('',#68795,.F.); +#68795 = EDGE_LOOP('',(#68796,#68797,#68805,#68813,#68821,#68829,#68837, + #68845,#68853,#68861,#68869,#68877,#68885,#68893)); +#68796 = ORIENTED_EDGE('',*,*,#68672,.T.); +#68797 = ORIENTED_EDGE('',*,*,#68798,.F.); +#68798 = EDGE_CURVE('',#68799,#68675,#68801,.T.); +#68799 = VERTEX_POINT('',#68800); +#68800 = CARTESIAN_POINT('',(1.73,1.73,0.2)); +#68801 = LINE('',#68802,#68803); +#68802 = CARTESIAN_POINT('',(1.73,1.73,0.2)); +#68803 = VECTOR('',#68804,1.); +#68804 = DIRECTION('',(0.,0.,1.)); +#68805 = ORIENTED_EDGE('',*,*,#68806,.F.); +#68806 = EDGE_CURVE('',#68807,#68799,#68809,.T.); +#68807 = VERTEX_POINT('',#68808); +#68808 = CARTESIAN_POINT('',(1.73,1.29,0.2)); +#68809 = LINE('',#68810,#68811); +#68810 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68811 = VECTOR('',#68812,1.); +#68812 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68813 = ORIENTED_EDGE('',*,*,#68814,.T.); +#68814 = EDGE_CURVE('',#68807,#68815,#68817,.T.); +#68815 = VERTEX_POINT('',#68816); +#68816 = CARTESIAN_POINT('',(1.73,1.29,1.)); +#68817 = LINE('',#68818,#68819); +#68818 = CARTESIAN_POINT('',(1.73,1.29,0.1)); +#68819 = VECTOR('',#68820,1.); +#68820 = DIRECTION('',(0.,0.,1.)); +#68821 = ORIENTED_EDGE('',*,*,#68822,.F.); +#68822 = EDGE_CURVE('',#68823,#68815,#68825,.T.); +#68823 = VERTEX_POINT('',#68824); +#68824 = CARTESIAN_POINT('',(1.73,0.49,1.)); +#68825 = LINE('',#68826,#68827); +#68826 = CARTESIAN_POINT('',(1.73,-0.42,1.)); +#68827 = VECTOR('',#68828,1.); +#68828 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#68829 = ORIENTED_EDGE('',*,*,#68830,.T.); +#68830 = EDGE_CURVE('',#68823,#68831,#68833,.T.); +#68831 = VERTEX_POINT('',#68832); +#68832 = CARTESIAN_POINT('',(1.73,0.49,0.2)); +#68833 = LINE('',#68834,#68835); +#68834 = CARTESIAN_POINT('',(1.73,0.49,0.1)); +#68835 = VECTOR('',#68836,1.); +#68836 = DIRECTION('',(0.,0.,-1.)); +#68837 = ORIENTED_EDGE('',*,*,#68838,.F.); +#68838 = EDGE_CURVE('',#68839,#68831,#68841,.T.); +#68839 = VERTEX_POINT('',#68840); +#68840 = CARTESIAN_POINT('',(1.73,-0.49,0.2)); +#68841 = LINE('',#68842,#68843); +#68842 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68843 = VECTOR('',#68844,1.); +#68844 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68845 = ORIENTED_EDGE('',*,*,#68846,.T.); +#68846 = EDGE_CURVE('',#68839,#68847,#68849,.T.); +#68847 = VERTEX_POINT('',#68848); +#68848 = CARTESIAN_POINT('',(1.73,-0.49,1.)); +#68849 = LINE('',#68850,#68851); +#68850 = CARTESIAN_POINT('',(1.73,-0.49,0.1)); +#68851 = VECTOR('',#68852,1.); +#68852 = DIRECTION('',(0.,0.,1.)); +#68853 = ORIENTED_EDGE('',*,*,#68854,.F.); +#68854 = EDGE_CURVE('',#68855,#68847,#68857,.T.); +#68855 = VERTEX_POINT('',#68856); +#68856 = CARTESIAN_POINT('',(1.73,-1.29,1.)); +#68857 = LINE('',#68858,#68859); +#68858 = CARTESIAN_POINT('',(1.73,-1.31,1.)); +#68859 = VECTOR('',#68860,1.); +#68860 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#68861 = ORIENTED_EDGE('',*,*,#68862,.T.); +#68862 = EDGE_CURVE('',#68855,#68863,#68865,.T.); +#68863 = VERTEX_POINT('',#68864); +#68864 = CARTESIAN_POINT('',(1.73,-1.29,0.2)); +#68865 = LINE('',#68866,#68867); +#68866 = CARTESIAN_POINT('',(1.73,-1.29,0.1)); +#68867 = VECTOR('',#68868,1.); +#68868 = DIRECTION('',(0.,0.,-1.)); +#68869 = ORIENTED_EDGE('',*,*,#68870,.F.); +#68870 = EDGE_CURVE('',#68871,#68863,#68873,.T.); +#68871 = VERTEX_POINT('',#68872); +#68872 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68873 = LINE('',#68874,#68875); +#68874 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68875 = VECTOR('',#68876,1.); +#68876 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68877 = ORIENTED_EDGE('',*,*,#68878,.T.); +#68878 = EDGE_CURVE('',#68871,#68879,#68881,.T.); +#68879 = VERTEX_POINT('',#68880); +#68880 = CARTESIAN_POINT('',(1.73,-1.73,1.56)); +#68881 = LINE('',#68882,#68883); +#68882 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68883 = VECTOR('',#68884,1.); +#68884 = DIRECTION('',(0.,0.,1.)); +#68885 = ORIENTED_EDGE('',*,*,#68886,.T.); +#68886 = EDGE_CURVE('',#68879,#68887,#68889,.T.); +#68887 = VERTEX_POINT('',#68888); +#68888 = CARTESIAN_POINT('',(1.73,-1.013410537095,1.56)); +#68889 = LINE('',#68890,#68891); +#68890 = CARTESIAN_POINT('',(1.73,-2.1625,1.56)); +#68891 = VECTOR('',#68892,1.); +#68892 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68893 = ORIENTED_EDGE('',*,*,#68894,.T.); +#68894 = EDGE_CURVE('',#68887,#68673,#68895,.T.); +#68895 = LINE('',#68896,#68897); +#68896 = CARTESIAN_POINT('',(1.73,-1.013410537095,0.88)); +#68897 = VECTOR('',#68898,1.); +#68898 = DIRECTION('',(0.,0.,1.)); +#68899 = PLANE('',#68900); +#68900 = AXIS2_PLACEMENT_3D('',#68901,#68902,#68903); +#68901 = CARTESIAN_POINT('',(1.73,-1.73,0.2)); +#68902 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68903 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68904 = ADVANCED_FACE('',(#68905),#68923,.T.); +#68905 = FACE_BOUND('',#68906,.T.); +#68906 = EDGE_LOOP('',(#68907,#68915,#68921,#68922)); +#68907 = ORIENTED_EDGE('',*,*,#68908,.T.); +#68908 = EDGE_CURVE('',#68706,#68909,#68911,.T.); +#68909 = VERTEX_POINT('',#68910); +#68910 = CARTESIAN_POINT('',(1.013410537095,-1.73,1.56)); +#68911 = LINE('',#68912,#68913); +#68912 = CARTESIAN_POINT('',(1.013410537095,-1.73,0.88)); +#68913 = VECTOR('',#68914,1.); +#68914 = DIRECTION('',(0.,0.,-1.)); +#68915 = ORIENTED_EDGE('',*,*,#68916,.F.); +#68916 = EDGE_CURVE('',#68887,#68909,#68917,.T.); +#68917 = LINE('',#68918,#68919); +#68918 = CARTESIAN_POINT('',(2.595,-0.148410537095,1.56)); +#68919 = VECTOR('',#68920,1.); +#68920 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#68921 = ORIENTED_EDGE('',*,*,#68894,.T.); +#68922 = ORIENTED_EDGE('',*,*,#68714,.F.); +#68923 = PLANE('',#68924); +#68924 = AXIS2_PLACEMENT_3D('',#68925,#68926,#68927); +#68925 = CARTESIAN_POINT('',(2.595,-0.148410537095,1.56)); +#68926 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#68927 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#68928 = ADVANCED_FACE('',(#68929),#68947,.F.); +#68929 = FACE_BOUND('',#68930,.F.); +#68930 = EDGE_LOOP('',(#68931,#68932,#68933,#68941)); +#68931 = ORIENTED_EDGE('',*,*,#68798,.T.); +#68932 = ORIENTED_EDGE('',*,*,#68730,.T.); +#68933 = ORIENTED_EDGE('',*,*,#68934,.F.); +#68934 = EDGE_CURVE('',#68935,#68731,#68937,.T.); +#68935 = VERTEX_POINT('',#68936); +#68936 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#68937 = LINE('',#68938,#68939); +#68938 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#68939 = VECTOR('',#68940,1.); +#68940 = DIRECTION('',(0.,0.,1.)); +#68941 = ORIENTED_EDGE('',*,*,#68942,.F.); +#68942 = EDGE_CURVE('',#68799,#68935,#68943,.T.); +#68943 = LINE('',#68944,#68945); +#68944 = CARTESIAN_POINT('',(1.73,1.73,0.2)); +#68945 = VECTOR('',#68946,1.); +#68946 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68947 = PLANE('',#68948); +#68948 = AXIS2_PLACEMENT_3D('',#68949,#68950,#68951); +#68949 = CARTESIAN_POINT('',(1.73,1.73,0.2)); +#68950 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#68951 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#68952 = ADVANCED_FACE('',(#68953),#68978,.F.); +#68953 = FACE_BOUND('',#68954,.F.); +#68954 = EDGE_LOOP('',(#68955,#68956,#68962,#68963,#68971,#68977)); +#68955 = ORIENTED_EDGE('',*,*,#68908,.T.); +#68956 = ORIENTED_EDGE('',*,*,#68957,.T.); +#68957 = EDGE_CURVE('',#68909,#68879,#68958,.T.); +#68958 = LINE('',#68959,#68960); +#68959 = CARTESIAN_POINT('',(0.4325,-1.73,1.56)); +#68960 = VECTOR('',#68961,1.); +#68961 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68962 = ORIENTED_EDGE('',*,*,#68878,.F.); +#68963 = ORIENTED_EDGE('',*,*,#68964,.F.); +#68964 = EDGE_CURVE('',#68965,#68871,#68967,.T.); +#68965 = VERTEX_POINT('',#68966); +#68966 = CARTESIAN_POINT('',(-1.73,-1.73,0.2)); +#68967 = LINE('',#68968,#68969); +#68968 = CARTESIAN_POINT('',(-1.73,-1.73,0.2)); +#68969 = VECTOR('',#68970,1.); +#68970 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68971 = ORIENTED_EDGE('',*,*,#68972,.T.); +#68972 = EDGE_CURVE('',#68965,#68756,#68973,.T.); +#68973 = LINE('',#68974,#68975); +#68974 = CARTESIAN_POINT('',(-1.73,-1.73,0.2)); +#68975 = VECTOR('',#68976,1.); +#68976 = DIRECTION('',(0.,0.,1.)); +#68977 = ORIENTED_EDGE('',*,*,#68764,.T.); +#68978 = PLANE('',#68979); +#68979 = AXIS2_PLACEMENT_3D('',#68980,#68981,#68982); +#68980 = CARTESIAN_POINT('',(-1.73,-1.73,0.2)); +#68981 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#68982 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#68983 = ADVANCED_FACE('',(#68984),#69059,.F.); +#68984 = FACE_BOUND('',#68985,.F.); +#68985 = EDGE_LOOP('',(#68986,#68987,#68988,#68989,#68997,#69005,#69013, + #69021,#69029,#69037,#69045,#69053)); +#68986 = ORIENTED_EDGE('',*,*,#68934,.T.); +#68987 = ORIENTED_EDGE('',*,*,#68780,.T.); +#68988 = ORIENTED_EDGE('',*,*,#68972,.F.); +#68989 = ORIENTED_EDGE('',*,*,#68990,.F.); +#68990 = EDGE_CURVE('',#68991,#68965,#68993,.T.); +#68991 = VERTEX_POINT('',#68992); +#68992 = CARTESIAN_POINT('',(-1.73,-1.29,0.2)); +#68993 = LINE('',#68994,#68995); +#68994 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#68995 = VECTOR('',#68996,1.); +#68996 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#68997 = ORIENTED_EDGE('',*,*,#68998,.T.); +#68998 = EDGE_CURVE('',#68991,#68999,#69001,.T.); +#68999 = VERTEX_POINT('',#69000); +#69000 = CARTESIAN_POINT('',(-1.73,-1.29,1.)); +#69001 = LINE('',#69002,#69003); +#69002 = CARTESIAN_POINT('',(-1.73,-1.29,0.1)); +#69003 = VECTOR('',#69004,1.); +#69004 = DIRECTION('',(-0.,0.,1.)); +#69005 = ORIENTED_EDGE('',*,*,#69006,.F.); +#69006 = EDGE_CURVE('',#69007,#68999,#69009,.T.); +#69007 = VERTEX_POINT('',#69008); +#69008 = CARTESIAN_POINT('',(-1.73,-0.49,1.)); +#69009 = LINE('',#69010,#69011); +#69010 = CARTESIAN_POINT('',(-1.73,0.42,1.)); +#69011 = VECTOR('',#69012,1.); +#69012 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69013 = ORIENTED_EDGE('',*,*,#69014,.T.); +#69014 = EDGE_CURVE('',#69007,#69015,#69017,.T.); +#69015 = VERTEX_POINT('',#69016); +#69016 = CARTESIAN_POINT('',(-1.73,-0.49,0.2)); +#69017 = LINE('',#69018,#69019); +#69018 = CARTESIAN_POINT('',(-1.73,-0.49,0.1)); +#69019 = VECTOR('',#69020,1.); +#69020 = DIRECTION('',(0.,-0.,-1.)); +#69021 = ORIENTED_EDGE('',*,*,#69022,.F.); +#69022 = EDGE_CURVE('',#69023,#69015,#69025,.T.); +#69023 = VERTEX_POINT('',#69024); +#69024 = CARTESIAN_POINT('',(-1.73,0.49,0.2)); +#69025 = LINE('',#69026,#69027); +#69026 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#69027 = VECTOR('',#69028,1.); +#69028 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69029 = ORIENTED_EDGE('',*,*,#69030,.T.); +#69030 = EDGE_CURVE('',#69023,#69031,#69033,.T.); +#69031 = VERTEX_POINT('',#69032); +#69032 = CARTESIAN_POINT('',(-1.73,0.49,1.)); +#69033 = LINE('',#69034,#69035); +#69034 = CARTESIAN_POINT('',(-1.73,0.49,0.1)); +#69035 = VECTOR('',#69036,1.); +#69036 = DIRECTION('',(-0.,0.,1.)); +#69037 = ORIENTED_EDGE('',*,*,#69038,.F.); +#69038 = EDGE_CURVE('',#69039,#69031,#69041,.T.); +#69039 = VERTEX_POINT('',#69040); +#69040 = CARTESIAN_POINT('',(-1.73,1.29,1.)); +#69041 = LINE('',#69042,#69043); +#69042 = CARTESIAN_POINT('',(-1.73,1.31,1.)); +#69043 = VECTOR('',#69044,1.); +#69044 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69045 = ORIENTED_EDGE('',*,*,#69046,.T.); +#69046 = EDGE_CURVE('',#69039,#69047,#69049,.T.); +#69047 = VERTEX_POINT('',#69048); +#69048 = CARTESIAN_POINT('',(-1.73,1.29,0.2)); +#69049 = LINE('',#69050,#69051); +#69050 = CARTESIAN_POINT('',(-1.73,1.29,0.1)); +#69051 = VECTOR('',#69052,1.); +#69052 = DIRECTION('',(0.,-0.,-1.)); +#69053 = ORIENTED_EDGE('',*,*,#69054,.F.); +#69054 = EDGE_CURVE('',#68935,#69047,#69055,.T.); +#69055 = LINE('',#69056,#69057); +#69056 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#69057 = VECTOR('',#69058,1.); +#69058 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69059 = PLANE('',#69060); +#69060 = AXIS2_PLACEMENT_3D('',#69061,#69062,#69063); +#69061 = CARTESIAN_POINT('',(-1.73,1.73,0.2)); +#69062 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69063 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69064 = ADVANCED_FACE('',(#69065),#69070,.T.); +#69065 = FACE_BOUND('',#69066,.T.); +#69066 = EDGE_LOOP('',(#69067,#69068,#69069)); +#69067 = ORIENTED_EDGE('',*,*,#68886,.T.); +#69068 = ORIENTED_EDGE('',*,*,#68916,.T.); +#69069 = ORIENTED_EDGE('',*,*,#68957,.T.); +#69070 = PLANE('',#69071); +#69071 = AXIS2_PLACEMENT_3D('',#69072,#69073,#69074); +#69072 = CARTESIAN_POINT('',(2.595,-2.595,1.56)); +#69073 = DIRECTION('',(0.,0.,1.)); +#69074 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#69075 = ADVANCED_FACE('',(#69076),#69302,.F.); +#69076 = FACE_BOUND('',#69077,.F.); +#69077 = EDGE_LOOP('',(#69078,#69079,#69080,#69081,#69089,#69097,#69105, + #69113,#69121,#69129,#69135,#69136,#69144,#69152,#69160,#69168, + #69176,#69184,#69190,#69191,#69192,#69193,#69201,#69209,#69217, + #69225,#69233,#69241,#69247,#69248,#69256,#69264,#69272,#69280, + #69288,#69296)); +#69078 = ORIENTED_EDGE('',*,*,#68806,.T.); +#69079 = ORIENTED_EDGE('',*,*,#68942,.T.); +#69080 = ORIENTED_EDGE('',*,*,#69054,.T.); +#69081 = ORIENTED_EDGE('',*,*,#69082,.T.); +#69082 = EDGE_CURVE('',#69047,#69083,#69085,.T.); +#69083 = VERTEX_POINT('',#69084); +#69084 = CARTESIAN_POINT('',(-1.54,1.29,0.2)); +#69085 = LINE('',#69086,#69087); +#69086 = CARTESIAN_POINT('',(-0.445,1.29,0.2)); +#69087 = VECTOR('',#69088,1.); +#69088 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69089 = ORIENTED_EDGE('',*,*,#69090,.F.); +#69090 = EDGE_CURVE('',#69091,#69083,#69093,.T.); +#69091 = VERTEX_POINT('',#69092); +#69092 = CARTESIAN_POINT('',(-1.19,1.29,0.2)); +#69093 = LINE('',#69094,#69095); +#69094 = CARTESIAN_POINT('',(-1.1275,1.29,0.2)); +#69095 = VECTOR('',#69096,1.); +#69096 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69097 = ORIENTED_EDGE('',*,*,#69098,.T.); +#69098 = EDGE_CURVE('',#69091,#69099,#69101,.T.); +#69099 = VERTEX_POINT('',#69100); +#69100 = CARTESIAN_POINT('',(-0.89,1.29,0.2)); +#69101 = LINE('',#69102,#69103); +#69102 = CARTESIAN_POINT('',(-0.445,1.29,0.2)); +#69103 = VECTOR('',#69104,1.); +#69104 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69105 = ORIENTED_EDGE('',*,*,#69106,.T.); +#69106 = EDGE_CURVE('',#69099,#69107,#69109,.T.); +#69107 = VERTEX_POINT('',#69108); +#69108 = CARTESIAN_POINT('',(-0.89,0.49,0.2)); +#69109 = LINE('',#69110,#69111); +#69110 = CARTESIAN_POINT('',(-0.89,0.245,0.2)); +#69111 = VECTOR('',#69112,1.); +#69112 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69113 = ORIENTED_EDGE('',*,*,#69114,.T.); +#69114 = EDGE_CURVE('',#69107,#69115,#69117,.T.); +#69115 = VERTEX_POINT('',#69116); +#69116 = CARTESIAN_POINT('',(-1.19,0.49,0.2)); +#69117 = LINE('',#69118,#69119); +#69118 = CARTESIAN_POINT('',(-0.92,0.49,0.2)); +#69119 = VECTOR('',#69120,1.); +#69120 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69121 = ORIENTED_EDGE('',*,*,#69122,.F.); +#69122 = EDGE_CURVE('',#69123,#69115,#69125,.T.); +#69123 = VERTEX_POINT('',#69124); +#69124 = CARTESIAN_POINT('',(-1.54,0.49,0.2)); +#69125 = LINE('',#69126,#69127); +#69126 = CARTESIAN_POINT('',(-1.6025,0.49,0.2)); +#69127 = VECTOR('',#69128,1.); +#69128 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69129 = ORIENTED_EDGE('',*,*,#69130,.T.); +#69130 = EDGE_CURVE('',#69123,#69023,#69131,.T.); +#69131 = LINE('',#69132,#69133); +#69132 = CARTESIAN_POINT('',(-0.92,0.49,0.2)); +#69133 = VECTOR('',#69134,1.); +#69134 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69135 = ORIENTED_EDGE('',*,*,#69022,.T.); +#69136 = ORIENTED_EDGE('',*,*,#69137,.T.); +#69137 = EDGE_CURVE('',#69015,#69138,#69140,.T.); +#69138 = VERTEX_POINT('',#69139); +#69139 = CARTESIAN_POINT('',(-1.54,-0.49,0.2)); +#69140 = LINE('',#69141,#69142); +#69141 = CARTESIAN_POINT('',(-0.445,-0.49,0.2)); +#69142 = VECTOR('',#69143,1.); +#69143 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69144 = ORIENTED_EDGE('',*,*,#69145,.F.); +#69145 = EDGE_CURVE('',#69146,#69138,#69148,.T.); +#69146 = VERTEX_POINT('',#69147); +#69147 = CARTESIAN_POINT('',(-1.19,-0.49,0.2)); +#69148 = LINE('',#69149,#69150); +#69149 = CARTESIAN_POINT('',(-1.1275,-0.49,0.2)); +#69150 = VECTOR('',#69151,1.); +#69151 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69152 = ORIENTED_EDGE('',*,*,#69153,.T.); +#69153 = EDGE_CURVE('',#69146,#69154,#69156,.T.); +#69154 = VERTEX_POINT('',#69155); +#69155 = CARTESIAN_POINT('',(-0.89,-0.49,0.2)); +#69156 = LINE('',#69157,#69158); +#69157 = CARTESIAN_POINT('',(-0.445,-0.49,0.2)); +#69158 = VECTOR('',#69159,1.); +#69159 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69160 = ORIENTED_EDGE('',*,*,#69161,.T.); +#69161 = EDGE_CURVE('',#69154,#69162,#69164,.T.); +#69162 = VERTEX_POINT('',#69163); +#69163 = CARTESIAN_POINT('',(-0.89,-1.29,0.2)); +#69164 = LINE('',#69165,#69166); +#69165 = CARTESIAN_POINT('',(-0.89,-0.645,0.2)); +#69166 = VECTOR('',#69167,1.); +#69167 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69168 = ORIENTED_EDGE('',*,*,#69169,.T.); +#69169 = EDGE_CURVE('',#69162,#69170,#69172,.T.); +#69170 = VERTEX_POINT('',#69171); +#69171 = CARTESIAN_POINT('',(-1.19,-1.29,0.2)); +#69172 = LINE('',#69173,#69174); +#69173 = CARTESIAN_POINT('',(-0.92,-1.29,0.2)); +#69174 = VECTOR('',#69175,1.); +#69175 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69176 = ORIENTED_EDGE('',*,*,#69177,.F.); +#69177 = EDGE_CURVE('',#69178,#69170,#69180,.T.); +#69178 = VERTEX_POINT('',#69179); +#69179 = CARTESIAN_POINT('',(-1.54,-1.29,0.2)); +#69180 = LINE('',#69181,#69182); +#69181 = CARTESIAN_POINT('',(-1.6025,-1.29,0.2)); +#69182 = VECTOR('',#69183,1.); +#69183 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69184 = ORIENTED_EDGE('',*,*,#69185,.T.); +#69185 = EDGE_CURVE('',#69178,#68991,#69186,.T.); +#69186 = LINE('',#69187,#69188); +#69187 = CARTESIAN_POINT('',(-0.92,-1.29,0.2)); +#69188 = VECTOR('',#69189,1.); +#69189 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69190 = ORIENTED_EDGE('',*,*,#68990,.T.); +#69191 = ORIENTED_EDGE('',*,*,#68964,.T.); +#69192 = ORIENTED_EDGE('',*,*,#68870,.T.); +#69193 = ORIENTED_EDGE('',*,*,#69194,.T.); +#69194 = EDGE_CURVE('',#68863,#69195,#69197,.T.); +#69195 = VERTEX_POINT('',#69196); +#69196 = CARTESIAN_POINT('',(1.54,-1.29,0.2)); +#69197 = LINE('',#69198,#69199); +#69198 = CARTESIAN_POINT('',(0.445,-1.29,0.2)); +#69199 = VECTOR('',#69200,1.); +#69200 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69201 = ORIENTED_EDGE('',*,*,#69202,.F.); +#69202 = EDGE_CURVE('',#69203,#69195,#69205,.T.); +#69203 = VERTEX_POINT('',#69204); +#69204 = CARTESIAN_POINT('',(1.19,-1.29,0.2)); +#69205 = LINE('',#69206,#69207); +#69206 = CARTESIAN_POINT('',(1.1275,-1.29,0.2)); +#69207 = VECTOR('',#69208,1.); +#69208 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69209 = ORIENTED_EDGE('',*,*,#69210,.T.); +#69210 = EDGE_CURVE('',#69203,#69211,#69213,.T.); +#69211 = VERTEX_POINT('',#69212); +#69212 = CARTESIAN_POINT('',(0.89,-1.29,0.2)); +#69213 = LINE('',#69214,#69215); +#69214 = CARTESIAN_POINT('',(0.445,-1.29,0.2)); +#69215 = VECTOR('',#69216,1.); +#69216 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69217 = ORIENTED_EDGE('',*,*,#69218,.T.); +#69218 = EDGE_CURVE('',#69211,#69219,#69221,.T.); +#69219 = VERTEX_POINT('',#69220); +#69220 = CARTESIAN_POINT('',(0.89,-0.49,0.2)); +#69221 = LINE('',#69222,#69223); +#69222 = CARTESIAN_POINT('',(0.89,-0.245,0.2)); +#69223 = VECTOR('',#69224,1.); +#69224 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#69225 = ORIENTED_EDGE('',*,*,#69226,.T.); +#69226 = EDGE_CURVE('',#69219,#69227,#69229,.T.); +#69227 = VERTEX_POINT('',#69228); +#69228 = CARTESIAN_POINT('',(1.19,-0.49,0.2)); +#69229 = LINE('',#69230,#69231); +#69230 = CARTESIAN_POINT('',(0.92,-0.49,0.2)); +#69231 = VECTOR('',#69232,1.); +#69232 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69233 = ORIENTED_EDGE('',*,*,#69234,.F.); +#69234 = EDGE_CURVE('',#69235,#69227,#69237,.T.); +#69235 = VERTEX_POINT('',#69236); +#69236 = CARTESIAN_POINT('',(1.54,-0.49,0.2)); +#69237 = LINE('',#69238,#69239); +#69238 = CARTESIAN_POINT('',(1.6025,-0.49,0.2)); +#69239 = VECTOR('',#69240,1.); +#69240 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69241 = ORIENTED_EDGE('',*,*,#69242,.T.); +#69242 = EDGE_CURVE('',#69235,#68839,#69243,.T.); +#69243 = LINE('',#69244,#69245); +#69244 = CARTESIAN_POINT('',(0.92,-0.49,0.2)); +#69245 = VECTOR('',#69246,1.); +#69246 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69247 = ORIENTED_EDGE('',*,*,#68838,.T.); +#69248 = ORIENTED_EDGE('',*,*,#69249,.T.); +#69249 = EDGE_CURVE('',#68831,#69250,#69252,.T.); +#69250 = VERTEX_POINT('',#69251); +#69251 = CARTESIAN_POINT('',(1.54,0.49,0.2)); +#69252 = LINE('',#69253,#69254); +#69253 = CARTESIAN_POINT('',(0.445,0.49,0.2)); +#69254 = VECTOR('',#69255,1.); +#69255 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69256 = ORIENTED_EDGE('',*,*,#69257,.F.); +#69257 = EDGE_CURVE('',#69258,#69250,#69260,.T.); +#69258 = VERTEX_POINT('',#69259); +#69259 = CARTESIAN_POINT('',(1.19,0.49,0.2)); +#69260 = LINE('',#69261,#69262); +#69261 = CARTESIAN_POINT('',(1.1275,0.49,0.2)); +#69262 = VECTOR('',#69263,1.); +#69263 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69264 = ORIENTED_EDGE('',*,*,#69265,.T.); +#69265 = EDGE_CURVE('',#69258,#69266,#69268,.T.); +#69266 = VERTEX_POINT('',#69267); +#69267 = CARTESIAN_POINT('',(0.89,0.49,0.2)); +#69268 = LINE('',#69269,#69270); +#69269 = CARTESIAN_POINT('',(0.445,0.49,0.2)); +#69270 = VECTOR('',#69271,1.); +#69271 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69272 = ORIENTED_EDGE('',*,*,#69273,.T.); +#69273 = EDGE_CURVE('',#69266,#69274,#69276,.T.); +#69274 = VERTEX_POINT('',#69275); +#69275 = CARTESIAN_POINT('',(0.89,1.29,0.2)); +#69276 = LINE('',#69277,#69278); +#69277 = CARTESIAN_POINT('',(0.89,0.645,0.2)); +#69278 = VECTOR('',#69279,1.); +#69279 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#69280 = ORIENTED_EDGE('',*,*,#69281,.T.); +#69281 = EDGE_CURVE('',#69274,#69282,#69284,.T.); +#69282 = VERTEX_POINT('',#69283); +#69283 = CARTESIAN_POINT('',(1.19,1.29,0.2)); +#69284 = LINE('',#69285,#69286); +#69285 = CARTESIAN_POINT('',(0.92,1.29,0.2)); +#69286 = VECTOR('',#69287,1.); +#69287 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69288 = ORIENTED_EDGE('',*,*,#69289,.F.); +#69289 = EDGE_CURVE('',#69290,#69282,#69292,.T.); +#69290 = VERTEX_POINT('',#69291); +#69291 = CARTESIAN_POINT('',(1.54,1.29,0.2)); +#69292 = LINE('',#69293,#69294); +#69293 = CARTESIAN_POINT('',(1.6025,1.29,0.2)); +#69294 = VECTOR('',#69295,1.); +#69295 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69296 = ORIENTED_EDGE('',*,*,#69297,.T.); +#69297 = EDGE_CURVE('',#69290,#68807,#69298,.T.); +#69298 = LINE('',#69299,#69300); +#69299 = CARTESIAN_POINT('',(0.92,1.29,0.2)); +#69300 = VECTOR('',#69301,1.); +#69301 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69302 = PLANE('',#69303); +#69303 = AXIS2_PLACEMENT_3D('',#69304,#69305,#69306); +#69304 = CARTESIAN_POINT('',(6.417474130781E-17,-6.417474130781E-17,0.2) + ); +#69305 = DIRECTION('',(0.,0.,1.)); +#69306 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69307 = ADVANCED_FACE('',(#69308),#69362,.F.); +#69308 = FACE_BOUND('',#69309,.F.); +#69309 = EDGE_LOOP('',(#69310,#69320,#69329,#69337,#69343,#69344,#69345, + #69346,#69347,#69355)); +#69310 = ORIENTED_EDGE('',*,*,#69311,.F.); +#69311 = EDGE_CURVE('',#69312,#69314,#69316,.T.); +#69312 = VERTEX_POINT('',#69313); +#69313 = CARTESIAN_POINT('',(1.84,-1.29,0.1)); +#69314 = VERTEX_POINT('',#69315); +#69315 = CARTESIAN_POINT('',(1.84,-1.29,0.9)); +#69316 = LINE('',#69317,#69318); +#69317 = CARTESIAN_POINT('',(1.84,-1.29,0.)); +#69318 = VECTOR('',#69319,1.); +#69319 = DIRECTION('',(0.,0.,1.)); +#69320 = ORIENTED_EDGE('',*,*,#69321,.T.); +#69321 = EDGE_CURVE('',#69312,#69322,#69324,.T.); +#69322 = VERTEX_POINT('',#69323); +#69323 = CARTESIAN_POINT('',(1.74,-1.29,-1.387778780781E-17)); +#69324 = CIRCLE('',#69325,0.1); +#69325 = AXIS2_PLACEMENT_3D('',#69326,#69327,#69328); +#69326 = CARTESIAN_POINT('',(1.74,-1.29,0.1)); +#69327 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69328 = DIRECTION('',(0.,0.,-1.)); +#69329 = ORIENTED_EDGE('',*,*,#69330,.F.); +#69330 = EDGE_CURVE('',#69331,#69322,#69333,.T.); +#69331 = VERTEX_POINT('',#69332); +#69332 = CARTESIAN_POINT('',(0.89,-1.29,0.)); +#69333 = LINE('',#69334,#69335); +#69334 = CARTESIAN_POINT('',(0.89,-1.29,0.)); +#69335 = VECTOR('',#69336,1.); +#69336 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69337 = ORIENTED_EDGE('',*,*,#69338,.T.); +#69338 = EDGE_CURVE('',#69331,#69211,#69339,.T.); +#69339 = LINE('',#69340,#69341); +#69340 = CARTESIAN_POINT('',(0.89,-1.29,0.)); +#69341 = VECTOR('',#69342,1.); +#69342 = DIRECTION('',(0.,0.,1.)); +#69343 = ORIENTED_EDGE('',*,*,#69210,.F.); +#69344 = ORIENTED_EDGE('',*,*,#69202,.T.); +#69345 = ORIENTED_EDGE('',*,*,#69194,.F.); +#69346 = ORIENTED_EDGE('',*,*,#68862,.F.); +#69347 = ORIENTED_EDGE('',*,*,#69348,.T.); +#69348 = EDGE_CURVE('',#68855,#69349,#69351,.T.); +#69349 = VERTEX_POINT('',#69350); +#69350 = CARTESIAN_POINT('',(1.74,-1.29,1.)); +#69351 = LINE('',#69352,#69353); +#69352 = CARTESIAN_POINT('',(0.89,-1.29,1.)); +#69353 = VECTOR('',#69354,1.); +#69354 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69355 = ORIENTED_EDGE('',*,*,#69356,.F.); +#69356 = EDGE_CURVE('',#69314,#69349,#69357,.T.); +#69357 = CIRCLE('',#69358,0.1); +#69358 = AXIS2_PLACEMENT_3D('',#69359,#69360,#69361); +#69359 = CARTESIAN_POINT('',(1.74,-1.29,0.9)); +#69360 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69361 = DIRECTION('',(-0.,0.,-1.)); +#69362 = PLANE('',#69363); +#69363 = AXIS2_PLACEMENT_3D('',#69364,#69365,#69366); +#69364 = CARTESIAN_POINT('',(0.89,-1.29,0.)); +#69365 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69366 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69367 = ADVANCED_FACE('',(#69368),#69386,.T.); +#69368 = FACE_BOUND('',#69369,.T.); +#69369 = EDGE_LOOP('',(#69370,#69378,#69384,#69385)); +#69370 = ORIENTED_EDGE('',*,*,#69371,.T.); +#69371 = EDGE_CURVE('',#69349,#69372,#69374,.T.); +#69372 = VERTEX_POINT('',#69373); +#69373 = CARTESIAN_POINT('',(1.74,-0.49,1.)); +#69374 = LINE('',#69375,#69376); +#69375 = CARTESIAN_POINT('',(1.74,-1.29,1.)); +#69376 = VECTOR('',#69377,1.); +#69377 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69378 = ORIENTED_EDGE('',*,*,#69379,.T.); +#69379 = EDGE_CURVE('',#69372,#68847,#69380,.T.); +#69380 = LINE('',#69381,#69382); +#69381 = CARTESIAN_POINT('',(1.84,-0.49,1.)); +#69382 = VECTOR('',#69383,1.); +#69383 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69384 = ORIENTED_EDGE('',*,*,#68854,.F.); +#69385 = ORIENTED_EDGE('',*,*,#69348,.T.); +#69386 = PLANE('',#69387); +#69387 = AXIS2_PLACEMENT_3D('',#69388,#69389,#69390); +#69388 = CARTESIAN_POINT('',(1.365,-0.89,1.)); +#69389 = DIRECTION('',(0.,0.,1.)); +#69390 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69391 = ADVANCED_FACE('',(#69392),#69439,.F.); +#69392 = FACE_BOUND('',#69393,.F.); +#69393 = EDGE_LOOP('',(#69394,#69405,#69413,#69420,#69421,#69422,#69423, + #69424,#69425,#69433)); +#69394 = ORIENTED_EDGE('',*,*,#69395,.F.); +#69395 = EDGE_CURVE('',#69396,#69398,#69400,.T.); +#69396 = VERTEX_POINT('',#69397); +#69397 = CARTESIAN_POINT('',(1.84,-0.49,0.1)); +#69398 = VERTEX_POINT('',#69399); +#69399 = CARTESIAN_POINT('',(1.74,-0.49,-1.387778780781E-17)); +#69400 = CIRCLE('',#69401,0.1); +#69401 = AXIS2_PLACEMENT_3D('',#69402,#69403,#69404); +#69402 = CARTESIAN_POINT('',(1.74,-0.49,0.1)); +#69403 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69404 = DIRECTION('',(0.,0.,-1.)); +#69405 = ORIENTED_EDGE('',*,*,#69406,.T.); +#69406 = EDGE_CURVE('',#69396,#69407,#69409,.T.); +#69407 = VERTEX_POINT('',#69408); +#69408 = CARTESIAN_POINT('',(1.84,-0.49,0.9)); +#69409 = LINE('',#69410,#69411); +#69410 = CARTESIAN_POINT('',(1.84,-0.49,0.)); +#69411 = VECTOR('',#69412,1.); +#69412 = DIRECTION('',(0.,0.,1.)); +#69413 = ORIENTED_EDGE('',*,*,#69414,.T.); +#69414 = EDGE_CURVE('',#69407,#69372,#69415,.T.); +#69415 = CIRCLE('',#69416,0.1); +#69416 = AXIS2_PLACEMENT_3D('',#69417,#69418,#69419); +#69417 = CARTESIAN_POINT('',(1.74,-0.49,0.9)); +#69418 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69419 = DIRECTION('',(-0.,0.,-1.)); +#69420 = ORIENTED_EDGE('',*,*,#69379,.T.); +#69421 = ORIENTED_EDGE('',*,*,#68846,.F.); +#69422 = ORIENTED_EDGE('',*,*,#69242,.F.); +#69423 = ORIENTED_EDGE('',*,*,#69234,.T.); +#69424 = ORIENTED_EDGE('',*,*,#69226,.F.); +#69425 = ORIENTED_EDGE('',*,*,#69426,.F.); +#69426 = EDGE_CURVE('',#69427,#69219,#69429,.T.); +#69427 = VERTEX_POINT('',#69428); +#69428 = CARTESIAN_POINT('',(0.89,-0.49,0.)); +#69429 = LINE('',#69430,#69431); +#69430 = CARTESIAN_POINT('',(0.89,-0.49,0.)); +#69431 = VECTOR('',#69432,1.); +#69432 = DIRECTION('',(0.,0.,1.)); +#69433 = ORIENTED_EDGE('',*,*,#69434,.F.); +#69434 = EDGE_CURVE('',#69398,#69427,#69435,.T.); +#69435 = LINE('',#69436,#69437); +#69436 = CARTESIAN_POINT('',(1.84,-0.49,0.)); +#69437 = VECTOR('',#69438,1.); +#69438 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69439 = PLANE('',#69440); +#69440 = AXIS2_PLACEMENT_3D('',#69441,#69442,#69443); +#69441 = CARTESIAN_POINT('',(1.84,-0.49,0.)); +#69442 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69443 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69444 = ADVANCED_FACE('',(#69445),#69499,.F.); +#69445 = FACE_BOUND('',#69446,.F.); +#69446 = EDGE_LOOP('',(#69447,#69457,#69466,#69474,#69480,#69481,#69482, + #69483,#69484,#69492)); +#69447 = ORIENTED_EDGE('',*,*,#69448,.F.); +#69448 = EDGE_CURVE('',#69449,#69451,#69453,.T.); +#69449 = VERTEX_POINT('',#69450); +#69450 = CARTESIAN_POINT('',(1.84,0.49,0.1)); +#69451 = VERTEX_POINT('',#69452); +#69452 = CARTESIAN_POINT('',(1.84,0.49,0.9)); +#69453 = LINE('',#69454,#69455); +#69454 = CARTESIAN_POINT('',(1.84,0.49,0.)); +#69455 = VECTOR('',#69456,1.); +#69456 = DIRECTION('',(0.,0.,1.)); +#69457 = ORIENTED_EDGE('',*,*,#69458,.T.); +#69458 = EDGE_CURVE('',#69449,#69459,#69461,.T.); +#69459 = VERTEX_POINT('',#69460); +#69460 = CARTESIAN_POINT('',(1.74,0.49,-1.387778780781E-17)); +#69461 = CIRCLE('',#69462,0.1); +#69462 = AXIS2_PLACEMENT_3D('',#69463,#69464,#69465); +#69463 = CARTESIAN_POINT('',(1.74,0.49,0.1)); +#69464 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69465 = DIRECTION('',(0.,0.,-1.)); +#69466 = ORIENTED_EDGE('',*,*,#69467,.F.); +#69467 = EDGE_CURVE('',#69468,#69459,#69470,.T.); +#69468 = VERTEX_POINT('',#69469); +#69469 = CARTESIAN_POINT('',(0.89,0.49,0.)); +#69470 = LINE('',#69471,#69472); +#69471 = CARTESIAN_POINT('',(0.89,0.49,0.)); +#69472 = VECTOR('',#69473,1.); +#69473 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69474 = ORIENTED_EDGE('',*,*,#69475,.T.); +#69475 = EDGE_CURVE('',#69468,#69266,#69476,.T.); +#69476 = LINE('',#69477,#69478); +#69477 = CARTESIAN_POINT('',(0.89,0.49,0.)); +#69478 = VECTOR('',#69479,1.); +#69479 = DIRECTION('',(0.,0.,1.)); +#69480 = ORIENTED_EDGE('',*,*,#69265,.F.); +#69481 = ORIENTED_EDGE('',*,*,#69257,.T.); +#69482 = ORIENTED_EDGE('',*,*,#69249,.F.); +#69483 = ORIENTED_EDGE('',*,*,#68830,.F.); +#69484 = ORIENTED_EDGE('',*,*,#69485,.T.); +#69485 = EDGE_CURVE('',#68823,#69486,#69488,.T.); +#69486 = VERTEX_POINT('',#69487); +#69487 = CARTESIAN_POINT('',(1.74,0.49,1.)); +#69488 = LINE('',#69489,#69490); +#69489 = CARTESIAN_POINT('',(0.89,0.49,1.)); +#69490 = VECTOR('',#69491,1.); +#69491 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69492 = ORIENTED_EDGE('',*,*,#69493,.F.); +#69493 = EDGE_CURVE('',#69451,#69486,#69494,.T.); +#69494 = CIRCLE('',#69495,0.1); +#69495 = AXIS2_PLACEMENT_3D('',#69496,#69497,#69498); +#69496 = CARTESIAN_POINT('',(1.74,0.49,0.9)); +#69497 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69498 = DIRECTION('',(-0.,0.,-1.)); +#69499 = PLANE('',#69500); +#69500 = AXIS2_PLACEMENT_3D('',#69501,#69502,#69503); +#69501 = CARTESIAN_POINT('',(0.89,0.49,0.)); +#69502 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69503 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69504 = ADVANCED_FACE('',(#69505),#69523,.T.); +#69505 = FACE_BOUND('',#69506,.T.); +#69506 = EDGE_LOOP('',(#69507,#69515,#69521,#69522)); +#69507 = ORIENTED_EDGE('',*,*,#69508,.T.); +#69508 = EDGE_CURVE('',#69486,#69509,#69511,.T.); +#69509 = VERTEX_POINT('',#69510); +#69510 = CARTESIAN_POINT('',(1.74,1.29,1.)); +#69511 = LINE('',#69512,#69513); +#69512 = CARTESIAN_POINT('',(1.74,0.49,1.)); +#69513 = VECTOR('',#69514,1.); +#69514 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69515 = ORIENTED_EDGE('',*,*,#69516,.T.); +#69516 = EDGE_CURVE('',#69509,#68815,#69517,.T.); +#69517 = LINE('',#69518,#69519); +#69518 = CARTESIAN_POINT('',(1.84,1.29,1.)); +#69519 = VECTOR('',#69520,1.); +#69520 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69521 = ORIENTED_EDGE('',*,*,#68822,.F.); +#69522 = ORIENTED_EDGE('',*,*,#69485,.T.); +#69523 = PLANE('',#69524); +#69524 = AXIS2_PLACEMENT_3D('',#69525,#69526,#69527); +#69525 = CARTESIAN_POINT('',(1.365,0.89,1.)); +#69526 = DIRECTION('',(0.,0.,1.)); +#69527 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69528 = ADVANCED_FACE('',(#69529),#69576,.F.); +#69529 = FACE_BOUND('',#69530,.F.); +#69530 = EDGE_LOOP('',(#69531,#69542,#69550,#69557,#69558,#69559,#69560, + #69561,#69562,#69570)); +#69531 = ORIENTED_EDGE('',*,*,#69532,.F.); +#69532 = EDGE_CURVE('',#69533,#69535,#69537,.T.); +#69533 = VERTEX_POINT('',#69534); +#69534 = CARTESIAN_POINT('',(1.84,1.29,0.1)); +#69535 = VERTEX_POINT('',#69536); +#69536 = CARTESIAN_POINT('',(1.74,1.29,-1.387778780781E-17)); +#69537 = CIRCLE('',#69538,0.1); +#69538 = AXIS2_PLACEMENT_3D('',#69539,#69540,#69541); +#69539 = CARTESIAN_POINT('',(1.74,1.29,0.1)); +#69540 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69541 = DIRECTION('',(0.,0.,-1.)); +#69542 = ORIENTED_EDGE('',*,*,#69543,.T.); +#69543 = EDGE_CURVE('',#69533,#69544,#69546,.T.); +#69544 = VERTEX_POINT('',#69545); +#69545 = CARTESIAN_POINT('',(1.84,1.29,0.9)); +#69546 = LINE('',#69547,#69548); +#69547 = CARTESIAN_POINT('',(1.84,1.29,0.)); +#69548 = VECTOR('',#69549,1.); +#69549 = DIRECTION('',(0.,0.,1.)); +#69550 = ORIENTED_EDGE('',*,*,#69551,.T.); +#69551 = EDGE_CURVE('',#69544,#69509,#69552,.T.); +#69552 = CIRCLE('',#69553,0.1); +#69553 = AXIS2_PLACEMENT_3D('',#69554,#69555,#69556); +#69554 = CARTESIAN_POINT('',(1.74,1.29,0.9)); +#69555 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69556 = DIRECTION('',(-0.,0.,-1.)); +#69557 = ORIENTED_EDGE('',*,*,#69516,.T.); +#69558 = ORIENTED_EDGE('',*,*,#68814,.F.); +#69559 = ORIENTED_EDGE('',*,*,#69297,.F.); +#69560 = ORIENTED_EDGE('',*,*,#69289,.T.); +#69561 = ORIENTED_EDGE('',*,*,#69281,.F.); +#69562 = ORIENTED_EDGE('',*,*,#69563,.F.); +#69563 = EDGE_CURVE('',#69564,#69274,#69566,.T.); +#69564 = VERTEX_POINT('',#69565); +#69565 = CARTESIAN_POINT('',(0.89,1.29,0.)); +#69566 = LINE('',#69567,#69568); +#69567 = CARTESIAN_POINT('',(0.89,1.29,0.)); +#69568 = VECTOR('',#69569,1.); +#69569 = DIRECTION('',(0.,0.,1.)); +#69570 = ORIENTED_EDGE('',*,*,#69571,.F.); +#69571 = EDGE_CURVE('',#69535,#69564,#69572,.T.); +#69572 = LINE('',#69573,#69574); +#69573 = CARTESIAN_POINT('',(1.84,1.29,0.)); +#69574 = VECTOR('',#69575,1.); +#69575 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69576 = PLANE('',#69577); +#69577 = AXIS2_PLACEMENT_3D('',#69578,#69579,#69580); +#69578 = CARTESIAN_POINT('',(1.84,1.29,0.)); +#69579 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69580 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69581 = ADVANCED_FACE('',(#69582),#69636,.F.); +#69582 = FACE_BOUND('',#69583,.F.); +#69583 = EDGE_LOOP('',(#69584,#69594,#69603,#69611,#69617,#69618,#69619, + #69620,#69621,#69629)); +#69584 = ORIENTED_EDGE('',*,*,#69585,.F.); +#69585 = EDGE_CURVE('',#69586,#69588,#69590,.T.); +#69586 = VERTEX_POINT('',#69587); +#69587 = CARTESIAN_POINT('',(-1.84,1.29,0.1)); +#69588 = VERTEX_POINT('',#69589); +#69589 = CARTESIAN_POINT('',(-1.84,1.29,0.9)); +#69590 = LINE('',#69591,#69592); +#69591 = CARTESIAN_POINT('',(-1.84,1.29,0.)); +#69592 = VECTOR('',#69593,1.); +#69593 = DIRECTION('',(0.,0.,1.)); +#69594 = ORIENTED_EDGE('',*,*,#69595,.T.); +#69595 = EDGE_CURVE('',#69586,#69596,#69598,.T.); +#69596 = VERTEX_POINT('',#69597); +#69597 = CARTESIAN_POINT('',(-1.74,1.29,-1.387778780781E-17)); +#69598 = CIRCLE('',#69599,0.1); +#69599 = AXIS2_PLACEMENT_3D('',#69600,#69601,#69602); +#69600 = CARTESIAN_POINT('',(-1.74,1.29,0.1)); +#69601 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69602 = DIRECTION('',(0.,0.,1.)); +#69603 = ORIENTED_EDGE('',*,*,#69604,.F.); +#69604 = EDGE_CURVE('',#69605,#69596,#69607,.T.); +#69605 = VERTEX_POINT('',#69606); +#69606 = CARTESIAN_POINT('',(-0.89,1.29,0.)); +#69607 = LINE('',#69608,#69609); +#69608 = CARTESIAN_POINT('',(-0.89,1.29,0.)); +#69609 = VECTOR('',#69610,1.); +#69610 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69611 = ORIENTED_EDGE('',*,*,#69612,.T.); +#69612 = EDGE_CURVE('',#69605,#69099,#69613,.T.); +#69613 = LINE('',#69614,#69615); +#69614 = CARTESIAN_POINT('',(-0.89,1.29,0.)); +#69615 = VECTOR('',#69616,1.); +#69616 = DIRECTION('',(0.,0.,1.)); +#69617 = ORIENTED_EDGE('',*,*,#69098,.F.); +#69618 = ORIENTED_EDGE('',*,*,#69090,.T.); +#69619 = ORIENTED_EDGE('',*,*,#69082,.F.); +#69620 = ORIENTED_EDGE('',*,*,#69046,.F.); +#69621 = ORIENTED_EDGE('',*,*,#69622,.T.); +#69622 = EDGE_CURVE('',#69039,#69623,#69625,.T.); +#69623 = VERTEX_POINT('',#69624); +#69624 = CARTESIAN_POINT('',(-1.74,1.29,1.)); +#69625 = LINE('',#69626,#69627); +#69626 = CARTESIAN_POINT('',(-0.89,1.29,1.)); +#69627 = VECTOR('',#69628,1.); +#69628 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69629 = ORIENTED_EDGE('',*,*,#69630,.T.); +#69630 = EDGE_CURVE('',#69623,#69588,#69631,.T.); +#69631 = CIRCLE('',#69632,0.1); +#69632 = AXIS2_PLACEMENT_3D('',#69633,#69634,#69635); +#69633 = CARTESIAN_POINT('',(-1.74,1.29,0.9)); +#69634 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69635 = DIRECTION('',(0.,0.,1.)); +#69636 = PLANE('',#69637); +#69637 = AXIS2_PLACEMENT_3D('',#69638,#69639,#69640); +#69638 = CARTESIAN_POINT('',(-0.89,1.29,0.)); +#69639 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69640 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69641 = ADVANCED_FACE('',(#69642),#69660,.T.); +#69642 = FACE_BOUND('',#69643,.T.); +#69643 = EDGE_LOOP('',(#69644,#69645,#69646,#69654)); +#69644 = ORIENTED_EDGE('',*,*,#69038,.F.); +#69645 = ORIENTED_EDGE('',*,*,#69622,.T.); +#69646 = ORIENTED_EDGE('',*,*,#69647,.T.); +#69647 = EDGE_CURVE('',#69623,#69648,#69650,.T.); +#69648 = VERTEX_POINT('',#69649); +#69649 = CARTESIAN_POINT('',(-1.74,0.49,1.)); +#69650 = LINE('',#69651,#69652); +#69651 = CARTESIAN_POINT('',(-1.74,1.29,1.)); +#69652 = VECTOR('',#69653,1.); +#69653 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69654 = ORIENTED_EDGE('',*,*,#69655,.T.); +#69655 = EDGE_CURVE('',#69648,#69031,#69656,.T.); +#69656 = LINE('',#69657,#69658); +#69657 = CARTESIAN_POINT('',(-1.84,0.49,1.)); +#69658 = VECTOR('',#69659,1.); +#69659 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69660 = PLANE('',#69661); +#69661 = AXIS2_PLACEMENT_3D('',#69662,#69663,#69664); +#69662 = CARTESIAN_POINT('',(-1.365,0.89,1.)); +#69663 = DIRECTION('',(0.,0.,1.)); +#69664 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69665 = ADVANCED_FACE('',(#69666),#69713,.F.); +#69666 = FACE_BOUND('',#69667,.F.); +#69667 = EDGE_LOOP('',(#69668,#69679,#69687,#69694,#69695,#69696,#69697, + #69698,#69699,#69707)); +#69668 = ORIENTED_EDGE('',*,*,#69669,.F.); +#69669 = EDGE_CURVE('',#69670,#69672,#69674,.T.); +#69670 = VERTEX_POINT('',#69671); +#69671 = CARTESIAN_POINT('',(-1.84,0.49,0.1)); +#69672 = VERTEX_POINT('',#69673); +#69673 = CARTESIAN_POINT('',(-1.74,0.49,-1.387778780781E-17)); +#69674 = CIRCLE('',#69675,0.1); +#69675 = AXIS2_PLACEMENT_3D('',#69676,#69677,#69678); +#69676 = CARTESIAN_POINT('',(-1.74,0.49,0.1)); +#69677 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69678 = DIRECTION('',(0.,0.,1.)); +#69679 = ORIENTED_EDGE('',*,*,#69680,.T.); +#69680 = EDGE_CURVE('',#69670,#69681,#69683,.T.); +#69681 = VERTEX_POINT('',#69682); +#69682 = CARTESIAN_POINT('',(-1.84,0.49,0.9)); +#69683 = LINE('',#69684,#69685); +#69684 = CARTESIAN_POINT('',(-1.84,0.49,0.)); +#69685 = VECTOR('',#69686,1.); +#69686 = DIRECTION('',(0.,0.,1.)); +#69687 = ORIENTED_EDGE('',*,*,#69688,.F.); +#69688 = EDGE_CURVE('',#69648,#69681,#69689,.T.); +#69689 = CIRCLE('',#69690,0.1); +#69690 = AXIS2_PLACEMENT_3D('',#69691,#69692,#69693); +#69691 = CARTESIAN_POINT('',(-1.74,0.49,0.9)); +#69692 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69693 = DIRECTION('',(0.,0.,1.)); +#69694 = ORIENTED_EDGE('',*,*,#69655,.T.); +#69695 = ORIENTED_EDGE('',*,*,#69030,.F.); +#69696 = ORIENTED_EDGE('',*,*,#69130,.F.); +#69697 = ORIENTED_EDGE('',*,*,#69122,.T.); +#69698 = ORIENTED_EDGE('',*,*,#69114,.F.); +#69699 = ORIENTED_EDGE('',*,*,#69700,.F.); +#69700 = EDGE_CURVE('',#69701,#69107,#69703,.T.); +#69701 = VERTEX_POINT('',#69702); +#69702 = CARTESIAN_POINT('',(-0.89,0.49,0.)); +#69703 = LINE('',#69704,#69705); +#69704 = CARTESIAN_POINT('',(-0.89,0.49,0.)); +#69705 = VECTOR('',#69706,1.); +#69706 = DIRECTION('',(0.,0.,1.)); +#69707 = ORIENTED_EDGE('',*,*,#69708,.F.); +#69708 = EDGE_CURVE('',#69672,#69701,#69709,.T.); +#69709 = LINE('',#69710,#69711); +#69710 = CARTESIAN_POINT('',(-1.84,0.49,0.)); +#69711 = VECTOR('',#69712,1.); +#69712 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69713 = PLANE('',#69714); +#69714 = AXIS2_PLACEMENT_3D('',#69715,#69716,#69717); +#69715 = CARTESIAN_POINT('',(-1.84,0.49,0.)); +#69716 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69717 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69718 = ADVANCED_FACE('',(#69719),#69773,.F.); +#69719 = FACE_BOUND('',#69720,.F.); +#69720 = EDGE_LOOP('',(#69721,#69731,#69740,#69748,#69754,#69755,#69756, + #69757,#69758,#69766)); +#69721 = ORIENTED_EDGE('',*,*,#69722,.F.); +#69722 = EDGE_CURVE('',#69723,#69725,#69727,.T.); +#69723 = VERTEX_POINT('',#69724); +#69724 = CARTESIAN_POINT('',(-1.84,-0.49,0.1)); +#69725 = VERTEX_POINT('',#69726); +#69726 = CARTESIAN_POINT('',(-1.84,-0.49,0.9)); +#69727 = LINE('',#69728,#69729); +#69728 = CARTESIAN_POINT('',(-1.84,-0.49,0.)); +#69729 = VECTOR('',#69730,1.); +#69730 = DIRECTION('',(0.,0.,1.)); +#69731 = ORIENTED_EDGE('',*,*,#69732,.T.); +#69732 = EDGE_CURVE('',#69723,#69733,#69735,.T.); +#69733 = VERTEX_POINT('',#69734); +#69734 = CARTESIAN_POINT('',(-1.74,-0.49,-1.387778780781E-17)); +#69735 = CIRCLE('',#69736,0.1); +#69736 = AXIS2_PLACEMENT_3D('',#69737,#69738,#69739); +#69737 = CARTESIAN_POINT('',(-1.74,-0.49,0.1)); +#69738 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69739 = DIRECTION('',(0.,0.,1.)); +#69740 = ORIENTED_EDGE('',*,*,#69741,.F.); +#69741 = EDGE_CURVE('',#69742,#69733,#69744,.T.); +#69742 = VERTEX_POINT('',#69743); +#69743 = CARTESIAN_POINT('',(-0.89,-0.49,0.)); +#69744 = LINE('',#69745,#69746); +#69745 = CARTESIAN_POINT('',(-0.89,-0.49,0.)); +#69746 = VECTOR('',#69747,1.); +#69747 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69748 = ORIENTED_EDGE('',*,*,#69749,.T.); +#69749 = EDGE_CURVE('',#69742,#69154,#69750,.T.); +#69750 = LINE('',#69751,#69752); +#69751 = CARTESIAN_POINT('',(-0.89,-0.49,0.)); +#69752 = VECTOR('',#69753,1.); +#69753 = DIRECTION('',(0.,0.,1.)); +#69754 = ORIENTED_EDGE('',*,*,#69153,.F.); +#69755 = ORIENTED_EDGE('',*,*,#69145,.T.); +#69756 = ORIENTED_EDGE('',*,*,#69137,.F.); +#69757 = ORIENTED_EDGE('',*,*,#69014,.F.); +#69758 = ORIENTED_EDGE('',*,*,#69759,.T.); +#69759 = EDGE_CURVE('',#69007,#69760,#69762,.T.); +#69760 = VERTEX_POINT('',#69761); +#69761 = CARTESIAN_POINT('',(-1.74,-0.49,1.)); +#69762 = LINE('',#69763,#69764); +#69763 = CARTESIAN_POINT('',(-0.89,-0.49,1.)); +#69764 = VECTOR('',#69765,1.); +#69765 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69766 = ORIENTED_EDGE('',*,*,#69767,.T.); +#69767 = EDGE_CURVE('',#69760,#69725,#69768,.T.); +#69768 = CIRCLE('',#69769,0.1); +#69769 = AXIS2_PLACEMENT_3D('',#69770,#69771,#69772); +#69770 = CARTESIAN_POINT('',(-1.74,-0.49,0.9)); +#69771 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69772 = DIRECTION('',(0.,0.,1.)); +#69773 = PLANE('',#69774); +#69774 = AXIS2_PLACEMENT_3D('',#69775,#69776,#69777); +#69775 = CARTESIAN_POINT('',(-0.89,-0.49,0.)); +#69776 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69777 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69778 = ADVANCED_FACE('',(#69779),#69797,.T.); +#69779 = FACE_BOUND('',#69780,.T.); +#69780 = EDGE_LOOP('',(#69781,#69782,#69783,#69791)); +#69781 = ORIENTED_EDGE('',*,*,#69006,.F.); +#69782 = ORIENTED_EDGE('',*,*,#69759,.T.); +#69783 = ORIENTED_EDGE('',*,*,#69784,.T.); +#69784 = EDGE_CURVE('',#69760,#69785,#69787,.T.); +#69785 = VERTEX_POINT('',#69786); +#69786 = CARTESIAN_POINT('',(-1.74,-1.29,1.)); +#69787 = LINE('',#69788,#69789); +#69788 = CARTESIAN_POINT('',(-1.74,-0.49,1.)); +#69789 = VECTOR('',#69790,1.); +#69790 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69791 = ORIENTED_EDGE('',*,*,#69792,.T.); +#69792 = EDGE_CURVE('',#69785,#68999,#69793,.T.); +#69793 = LINE('',#69794,#69795); +#69794 = CARTESIAN_POINT('',(-1.84,-1.29,1.)); +#69795 = VECTOR('',#69796,1.); +#69796 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69797 = PLANE('',#69798); +#69798 = AXIS2_PLACEMENT_3D('',#69799,#69800,#69801); +#69799 = CARTESIAN_POINT('',(-1.365,-0.89,1.)); +#69800 = DIRECTION('',(0.,0.,1.)); +#69801 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69802 = ADVANCED_FACE('',(#69803),#69850,.F.); +#69803 = FACE_BOUND('',#69804,.F.); +#69804 = EDGE_LOOP('',(#69805,#69816,#69824,#69831,#69832,#69833,#69834, + #69835,#69836,#69844)); +#69805 = ORIENTED_EDGE('',*,*,#69806,.F.); +#69806 = EDGE_CURVE('',#69807,#69809,#69811,.T.); +#69807 = VERTEX_POINT('',#69808); +#69808 = CARTESIAN_POINT('',(-1.84,-1.29,0.1)); +#69809 = VERTEX_POINT('',#69810); +#69810 = CARTESIAN_POINT('',(-1.74,-1.29,-1.387778780781E-17)); +#69811 = CIRCLE('',#69812,0.1); +#69812 = AXIS2_PLACEMENT_3D('',#69813,#69814,#69815); +#69813 = CARTESIAN_POINT('',(-1.74,-1.29,0.1)); +#69814 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69815 = DIRECTION('',(0.,0.,1.)); +#69816 = ORIENTED_EDGE('',*,*,#69817,.T.); +#69817 = EDGE_CURVE('',#69807,#69818,#69820,.T.); +#69818 = VERTEX_POINT('',#69819); +#69819 = CARTESIAN_POINT('',(-1.84,-1.29,0.9)); +#69820 = LINE('',#69821,#69822); +#69821 = CARTESIAN_POINT('',(-1.84,-1.29,0.)); +#69822 = VECTOR('',#69823,1.); +#69823 = DIRECTION('',(0.,0.,1.)); +#69824 = ORIENTED_EDGE('',*,*,#69825,.F.); +#69825 = EDGE_CURVE('',#69785,#69818,#69826,.T.); +#69826 = CIRCLE('',#69827,0.1); +#69827 = AXIS2_PLACEMENT_3D('',#69828,#69829,#69830); +#69828 = CARTESIAN_POINT('',(-1.74,-1.29,0.9)); +#69829 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69830 = DIRECTION('',(0.,0.,1.)); +#69831 = ORIENTED_EDGE('',*,*,#69792,.T.); +#69832 = ORIENTED_EDGE('',*,*,#68998,.F.); +#69833 = ORIENTED_EDGE('',*,*,#69185,.F.); +#69834 = ORIENTED_EDGE('',*,*,#69177,.T.); +#69835 = ORIENTED_EDGE('',*,*,#69169,.F.); +#69836 = ORIENTED_EDGE('',*,*,#69837,.F.); +#69837 = EDGE_CURVE('',#69838,#69162,#69840,.T.); +#69838 = VERTEX_POINT('',#69839); +#69839 = CARTESIAN_POINT('',(-0.89,-1.29,0.)); +#69840 = LINE('',#69841,#69842); +#69841 = CARTESIAN_POINT('',(-0.89,-1.29,0.)); +#69842 = VECTOR('',#69843,1.); +#69843 = DIRECTION('',(0.,0.,1.)); +#69844 = ORIENTED_EDGE('',*,*,#69845,.F.); +#69845 = EDGE_CURVE('',#69809,#69838,#69846,.T.); +#69846 = LINE('',#69847,#69848); +#69847 = CARTESIAN_POINT('',(-1.84,-1.29,0.)); +#69848 = VECTOR('',#69849,1.); +#69849 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69850 = PLANE('',#69851); +#69851 = AXIS2_PLACEMENT_3D('',#69852,#69853,#69854); +#69852 = CARTESIAN_POINT('',(-1.84,-1.29,0.)); +#69853 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69854 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69855 = ADVANCED_FACE('',(#69856),#69867,.F.); +#69856 = FACE_BOUND('',#69857,.F.); +#69857 = EDGE_LOOP('',(#69858,#69864,#69865,#69866)); +#69858 = ORIENTED_EDGE('',*,*,#69859,.F.); +#69859 = EDGE_CURVE('',#69564,#69468,#69860,.T.); +#69860 = LINE('',#69861,#69862); +#69861 = CARTESIAN_POINT('',(0.89,1.29,0.)); +#69862 = VECTOR('',#69863,1.); +#69863 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69864 = ORIENTED_EDGE('',*,*,#69563,.T.); +#69865 = ORIENTED_EDGE('',*,*,#69273,.F.); +#69866 = ORIENTED_EDGE('',*,*,#69475,.F.); +#69867 = PLANE('',#69868); +#69868 = AXIS2_PLACEMENT_3D('',#69869,#69870,#69871); +#69869 = CARTESIAN_POINT('',(0.89,1.29,0.)); +#69870 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69871 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69872 = ADVANCED_FACE('',(#69873),#69884,.F.); +#69873 = FACE_BOUND('',#69874,.F.); +#69874 = EDGE_LOOP('',(#69875,#69881,#69882,#69883)); +#69875 = ORIENTED_EDGE('',*,*,#69876,.F.); +#69876 = EDGE_CURVE('',#69427,#69331,#69877,.T.); +#69877 = LINE('',#69878,#69879); +#69878 = CARTESIAN_POINT('',(0.89,-0.49,0.)); +#69879 = VECTOR('',#69880,1.); +#69880 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69881 = ORIENTED_EDGE('',*,*,#69426,.T.); +#69882 = ORIENTED_EDGE('',*,*,#69218,.F.); +#69883 = ORIENTED_EDGE('',*,*,#69338,.F.); +#69884 = PLANE('',#69885); +#69885 = AXIS2_PLACEMENT_3D('',#69886,#69887,#69888); +#69886 = CARTESIAN_POINT('',(0.89,-0.49,0.)); +#69887 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69888 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#69889 = ADVANCED_FACE('',(#69890),#69901,.F.); +#69890 = FACE_BOUND('',#69891,.F.); +#69891 = EDGE_LOOP('',(#69892,#69898,#69899,#69900)); +#69892 = ORIENTED_EDGE('',*,*,#69893,.F.); +#69893 = EDGE_CURVE('',#69838,#69742,#69894,.T.); +#69894 = LINE('',#69895,#69896); +#69895 = CARTESIAN_POINT('',(-0.89,-1.29,0.)); +#69896 = VECTOR('',#69897,1.); +#69897 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69898 = ORIENTED_EDGE('',*,*,#69837,.T.); +#69899 = ORIENTED_EDGE('',*,*,#69161,.F.); +#69900 = ORIENTED_EDGE('',*,*,#69749,.F.); +#69901 = PLANE('',#69902); +#69902 = AXIS2_PLACEMENT_3D('',#69903,#69904,#69905); +#69903 = CARTESIAN_POINT('',(-0.89,-1.29,0.)); +#69904 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69905 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69906 = ADVANCED_FACE('',(#69907),#69918,.F.); +#69907 = FACE_BOUND('',#69908,.F.); +#69908 = EDGE_LOOP('',(#69909,#69915,#69916,#69917)); +#69909 = ORIENTED_EDGE('',*,*,#69910,.F.); +#69910 = EDGE_CURVE('',#69701,#69605,#69911,.T.); +#69911 = LINE('',#69912,#69913); +#69912 = CARTESIAN_POINT('',(-0.89,0.49,0.)); +#69913 = VECTOR('',#69914,1.); +#69914 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69915 = ORIENTED_EDGE('',*,*,#69700,.T.); +#69916 = ORIENTED_EDGE('',*,*,#69106,.F.); +#69917 = ORIENTED_EDGE('',*,*,#69612,.F.); +#69918 = PLANE('',#69919); +#69919 = AXIS2_PLACEMENT_3D('',#69920,#69921,#69922); +#69920 = CARTESIAN_POINT('',(-0.89,0.49,0.)); +#69921 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69922 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69923 = ADVANCED_FACE('',(#69924),#69940,.F.); +#69924 = FACE_BOUND('',#69925,.F.); +#69925 = EDGE_LOOP('',(#69926,#69927,#69933,#69934)); +#69926 = ORIENTED_EDGE('',*,*,#69311,.T.); +#69927 = ORIENTED_EDGE('',*,*,#69928,.T.); +#69928 = EDGE_CURVE('',#69314,#69407,#69929,.T.); +#69929 = LINE('',#69930,#69931); +#69930 = CARTESIAN_POINT('',(1.84,-1.29,0.9)); +#69931 = VECTOR('',#69932,1.); +#69932 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69933 = ORIENTED_EDGE('',*,*,#69406,.F.); +#69934 = ORIENTED_EDGE('',*,*,#69935,.F.); +#69935 = EDGE_CURVE('',#69312,#69396,#69936,.T.); +#69936 = LINE('',#69937,#69938); +#69937 = CARTESIAN_POINT('',(1.84,-1.29,0.1)); +#69938 = VECTOR('',#69939,1.); +#69939 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69940 = PLANE('',#69941); +#69941 = AXIS2_PLACEMENT_3D('',#69942,#69943,#69944); +#69942 = CARTESIAN_POINT('',(1.84,-1.29,0.)); +#69943 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69944 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69945 = ADVANCED_FACE('',(#69946),#69952,.T.); +#69946 = FACE_BOUND('',#69947,.T.); +#69947 = EDGE_LOOP('',(#69948,#69949,#69950,#69951)); +#69948 = ORIENTED_EDGE('',*,*,#69928,.T.); +#69949 = ORIENTED_EDGE('',*,*,#69414,.T.); +#69950 = ORIENTED_EDGE('',*,*,#69371,.F.); +#69951 = ORIENTED_EDGE('',*,*,#69356,.F.); +#69952 = CYLINDRICAL_SURFACE('',#69953,0.1); +#69953 = AXIS2_PLACEMENT_3D('',#69954,#69955,#69956); +#69954 = CARTESIAN_POINT('',(1.74,-1.29,0.9)); +#69955 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69956 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69957 = ADVANCED_FACE('',(#69958),#69969,.F.); +#69958 = FACE_BOUND('',#69959,.F.); +#69959 = EDGE_LOOP('',(#69960,#69961,#69962,#69963)); +#69960 = ORIENTED_EDGE('',*,*,#69434,.T.); +#69961 = ORIENTED_EDGE('',*,*,#69876,.T.); +#69962 = ORIENTED_EDGE('',*,*,#69330,.T.); +#69963 = ORIENTED_EDGE('',*,*,#69964,.T.); +#69964 = EDGE_CURVE('',#69322,#69398,#69965,.T.); +#69965 = LINE('',#69966,#69967); +#69966 = CARTESIAN_POINT('',(1.74,-1.29,-1.387778780781E-17)); +#69967 = VECTOR('',#69968,1.); +#69968 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69969 = PLANE('',#69970); +#69970 = AXIS2_PLACEMENT_3D('',#69971,#69972,#69973); +#69971 = CARTESIAN_POINT('',(1.365,-0.89,0.)); +#69972 = DIRECTION('',(0.,0.,1.)); +#69973 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#69974 = ADVANCED_FACE('',(#69975),#69981,.T.); +#69975 = FACE_BOUND('',#69976,.T.); +#69976 = EDGE_LOOP('',(#69977,#69978,#69979,#69980)); +#69977 = ORIENTED_EDGE('',*,*,#69321,.T.); +#69978 = ORIENTED_EDGE('',*,*,#69964,.T.); +#69979 = ORIENTED_EDGE('',*,*,#69395,.F.); +#69980 = ORIENTED_EDGE('',*,*,#69935,.F.); +#69981 = CYLINDRICAL_SURFACE('',#69982,0.1); +#69982 = AXIS2_PLACEMENT_3D('',#69983,#69984,#69985); +#69983 = CARTESIAN_POINT('',(1.74,-1.29,0.1)); +#69984 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69985 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#69986 = ADVANCED_FACE('',(#69987),#70003,.F.); +#69987 = FACE_BOUND('',#69988,.F.); +#69988 = EDGE_LOOP('',(#69989,#69990,#69996,#69997)); +#69989 = ORIENTED_EDGE('',*,*,#69448,.T.); +#69990 = ORIENTED_EDGE('',*,*,#69991,.T.); +#69991 = EDGE_CURVE('',#69451,#69544,#69992,.T.); +#69992 = LINE('',#69993,#69994); +#69993 = CARTESIAN_POINT('',(1.84,0.49,0.9)); +#69994 = VECTOR('',#69995,1.); +#69995 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#69996 = ORIENTED_EDGE('',*,*,#69543,.F.); +#69997 = ORIENTED_EDGE('',*,*,#69998,.F.); +#69998 = EDGE_CURVE('',#69449,#69533,#69999,.T.); +#69999 = LINE('',#70000,#70001); +#70000 = CARTESIAN_POINT('',(1.84,0.49,0.1)); +#70001 = VECTOR('',#70002,1.); +#70002 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#70003 = PLANE('',#70004); +#70004 = AXIS2_PLACEMENT_3D('',#70005,#70006,#70007); +#70005 = CARTESIAN_POINT('',(1.84,0.49,0.)); +#70006 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70007 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#70008 = ADVANCED_FACE('',(#70009),#70015,.T.); +#70009 = FACE_BOUND('',#70010,.T.); +#70010 = EDGE_LOOP('',(#70011,#70012,#70013,#70014)); +#70011 = ORIENTED_EDGE('',*,*,#69991,.T.); +#70012 = ORIENTED_EDGE('',*,*,#69551,.T.); +#70013 = ORIENTED_EDGE('',*,*,#69508,.F.); +#70014 = ORIENTED_EDGE('',*,*,#69493,.F.); +#70015 = CYLINDRICAL_SURFACE('',#70016,0.1); +#70016 = AXIS2_PLACEMENT_3D('',#70017,#70018,#70019); +#70017 = CARTESIAN_POINT('',(1.74,0.49,0.9)); +#70018 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#70019 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#70020 = ADVANCED_FACE('',(#70021),#70032,.F.); +#70021 = FACE_BOUND('',#70022,.F.); +#70022 = EDGE_LOOP('',(#70023,#70024,#70025,#70026)); +#70023 = ORIENTED_EDGE('',*,*,#69571,.T.); +#70024 = ORIENTED_EDGE('',*,*,#69859,.T.); +#70025 = ORIENTED_EDGE('',*,*,#69467,.T.); +#70026 = ORIENTED_EDGE('',*,*,#70027,.T.); +#70027 = EDGE_CURVE('',#69459,#69535,#70028,.T.); +#70028 = LINE('',#70029,#70030); +#70029 = CARTESIAN_POINT('',(1.74,0.49,-1.387778780781E-17)); +#70030 = VECTOR('',#70031,1.); +#70031 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#70032 = PLANE('',#70033); +#70033 = AXIS2_PLACEMENT_3D('',#70034,#70035,#70036); +#70034 = CARTESIAN_POINT('',(1.365,0.89,0.)); +#70035 = DIRECTION('',(0.,0.,1.)); +#70036 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70037 = ADVANCED_FACE('',(#70038),#70044,.T.); +#70038 = FACE_BOUND('',#70039,.T.); +#70039 = EDGE_LOOP('',(#70040,#70041,#70042,#70043)); +#70040 = ORIENTED_EDGE('',*,*,#69458,.T.); +#70041 = ORIENTED_EDGE('',*,*,#70027,.T.); +#70042 = ORIENTED_EDGE('',*,*,#69532,.F.); +#70043 = ORIENTED_EDGE('',*,*,#69998,.F.); +#70044 = CYLINDRICAL_SURFACE('',#70045,0.1); +#70045 = AXIS2_PLACEMENT_3D('',#70046,#70047,#70048); +#70046 = CARTESIAN_POINT('',(1.74,0.49,0.1)); +#70047 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#70048 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#70049 = ADVANCED_FACE('',(#70050),#70066,.F.); +#70050 = FACE_BOUND('',#70051,.F.); +#70051 = EDGE_LOOP('',(#70052,#70053,#70059,#70060)); +#70052 = ORIENTED_EDGE('',*,*,#69585,.T.); +#70053 = ORIENTED_EDGE('',*,*,#70054,.T.); +#70054 = EDGE_CURVE('',#69588,#69681,#70055,.T.); +#70055 = LINE('',#70056,#70057); +#70056 = CARTESIAN_POINT('',(-1.84,1.29,0.9)); +#70057 = VECTOR('',#70058,1.); +#70058 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70059 = ORIENTED_EDGE('',*,*,#69680,.F.); +#70060 = ORIENTED_EDGE('',*,*,#70061,.F.); +#70061 = EDGE_CURVE('',#69586,#69670,#70062,.T.); +#70062 = LINE('',#70063,#70064); +#70063 = CARTESIAN_POINT('',(-1.84,1.29,0.1)); +#70064 = VECTOR('',#70065,1.); +#70065 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70066 = PLANE('',#70067); +#70067 = AXIS2_PLACEMENT_3D('',#70068,#70069,#70070); +#70068 = CARTESIAN_POINT('',(-1.84,1.29,0.)); +#70069 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#70070 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70071 = ADVANCED_FACE('',(#70072),#70078,.T.); +#70072 = FACE_BOUND('',#70073,.T.); +#70073 = EDGE_LOOP('',(#70074,#70075,#70076,#70077)); +#70074 = ORIENTED_EDGE('',*,*,#69630,.T.); +#70075 = ORIENTED_EDGE('',*,*,#70054,.T.); +#70076 = ORIENTED_EDGE('',*,*,#69688,.F.); +#70077 = ORIENTED_EDGE('',*,*,#69647,.F.); +#70078 = CYLINDRICAL_SURFACE('',#70079,0.1); +#70079 = AXIS2_PLACEMENT_3D('',#70080,#70081,#70082); +#70080 = CARTESIAN_POINT('',(-1.74,1.29,0.9)); +#70081 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70082 = DIRECTION('',(0.,0.,1.)); +#70083 = ADVANCED_FACE('',(#70084),#70095,.F.); +#70084 = FACE_BOUND('',#70085,.F.); +#70085 = EDGE_LOOP('',(#70086,#70087,#70093,#70094)); +#70086 = ORIENTED_EDGE('',*,*,#69604,.T.); +#70087 = ORIENTED_EDGE('',*,*,#70088,.T.); +#70088 = EDGE_CURVE('',#69596,#69672,#70089,.T.); +#70089 = LINE('',#70090,#70091); +#70090 = CARTESIAN_POINT('',(-1.74,1.29,-1.387778780781E-17)); +#70091 = VECTOR('',#70092,1.); +#70092 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70093 = ORIENTED_EDGE('',*,*,#69708,.T.); +#70094 = ORIENTED_EDGE('',*,*,#69910,.T.); +#70095 = PLANE('',#70096); +#70096 = AXIS2_PLACEMENT_3D('',#70097,#70098,#70099); +#70097 = CARTESIAN_POINT('',(-1.365,0.89,0.)); +#70098 = DIRECTION('',(0.,0.,1.)); +#70099 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70100 = ADVANCED_FACE('',(#70101),#70107,.T.); +#70101 = FACE_BOUND('',#70102,.T.); +#70102 = EDGE_LOOP('',(#70103,#70104,#70105,#70106)); +#70103 = ORIENTED_EDGE('',*,*,#69595,.T.); +#70104 = ORIENTED_EDGE('',*,*,#70088,.T.); +#70105 = ORIENTED_EDGE('',*,*,#69669,.F.); +#70106 = ORIENTED_EDGE('',*,*,#70061,.F.); +#70107 = CYLINDRICAL_SURFACE('',#70108,0.1); +#70108 = AXIS2_PLACEMENT_3D('',#70109,#70110,#70111); +#70109 = CARTESIAN_POINT('',(-1.74,1.29,0.1)); +#70110 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70111 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70112 = ADVANCED_FACE('',(#70113),#70129,.F.); +#70113 = FACE_BOUND('',#70114,.F.); +#70114 = EDGE_LOOP('',(#70115,#70116,#70122,#70123)); +#70115 = ORIENTED_EDGE('',*,*,#69722,.T.); +#70116 = ORIENTED_EDGE('',*,*,#70117,.T.); +#70117 = EDGE_CURVE('',#69725,#69818,#70118,.T.); +#70118 = LINE('',#70119,#70120); +#70119 = CARTESIAN_POINT('',(-1.84,-0.49,0.9)); +#70120 = VECTOR('',#70121,1.); +#70121 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70122 = ORIENTED_EDGE('',*,*,#69817,.F.); +#70123 = ORIENTED_EDGE('',*,*,#70124,.F.); +#70124 = EDGE_CURVE('',#69723,#69807,#70125,.T.); +#70125 = LINE('',#70126,#70127); +#70126 = CARTESIAN_POINT('',(-1.84,-0.49,0.1)); +#70127 = VECTOR('',#70128,1.); +#70128 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70129 = PLANE('',#70130); +#70130 = AXIS2_PLACEMENT_3D('',#70131,#70132,#70133); +#70131 = CARTESIAN_POINT('',(-1.84,-0.49,0.)); +#70132 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#70133 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70134 = ADVANCED_FACE('',(#70135),#70141,.T.); +#70135 = FACE_BOUND('',#70136,.T.); +#70136 = EDGE_LOOP('',(#70137,#70138,#70139,#70140)); +#70137 = ORIENTED_EDGE('',*,*,#69767,.T.); +#70138 = ORIENTED_EDGE('',*,*,#70117,.T.); +#70139 = ORIENTED_EDGE('',*,*,#69825,.F.); +#70140 = ORIENTED_EDGE('',*,*,#69784,.F.); +#70141 = CYLINDRICAL_SURFACE('',#70142,0.1); +#70142 = AXIS2_PLACEMENT_3D('',#70143,#70144,#70145); +#70143 = CARTESIAN_POINT('',(-1.74,-0.49,0.9)); +#70144 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70145 = DIRECTION('',(0.,0.,1.)); +#70146 = ADVANCED_FACE('',(#70147),#70158,.F.); +#70147 = FACE_BOUND('',#70148,.F.); +#70148 = EDGE_LOOP('',(#70149,#70150,#70156,#70157)); +#70149 = ORIENTED_EDGE('',*,*,#69741,.T.); +#70150 = ORIENTED_EDGE('',*,*,#70151,.T.); +#70151 = EDGE_CURVE('',#69733,#69809,#70152,.T.); +#70152 = LINE('',#70153,#70154); +#70153 = CARTESIAN_POINT('',(-1.74,-0.49,-1.387778780781E-17)); +#70154 = VECTOR('',#70155,1.); +#70155 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70156 = ORIENTED_EDGE('',*,*,#69845,.T.); +#70157 = ORIENTED_EDGE('',*,*,#69893,.T.); +#70158 = PLANE('',#70159); +#70159 = AXIS2_PLACEMENT_3D('',#70160,#70161,#70162); +#70160 = CARTESIAN_POINT('',(-1.365,-0.89,0.)); +#70161 = DIRECTION('',(0.,0.,1.)); +#70162 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70163 = ADVANCED_FACE('',(#70164),#70170,.T.); +#70164 = FACE_BOUND('',#70165,.T.); +#70165 = EDGE_LOOP('',(#70166,#70167,#70168,#70169)); +#70166 = ORIENTED_EDGE('',*,*,#69732,.T.); +#70167 = ORIENTED_EDGE('',*,*,#70151,.T.); +#70168 = ORIENTED_EDGE('',*,*,#69806,.F.); +#70169 = ORIENTED_EDGE('',*,*,#70124,.F.); +#70170 = CYLINDRICAL_SURFACE('',#70171,0.1); +#70171 = AXIS2_PLACEMENT_3D('',#70172,#70173,#70174); +#70172 = CARTESIAN_POINT('',(-1.74,-0.49,0.1)); +#70173 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#70174 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#70175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#70179)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#70176,#70177,#70178)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#70176 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#70177 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#70178 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#70179 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#70176, + 'distance_accuracy_value','confusion accuracy'); +#70180 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#70181,#70183); +#70181 = ( REPRESENTATION_RELATIONSHIP('','',#68547,#68524) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#70182) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#70182 = ITEM_DEFINED_TRANSFORMATION('','',#11,#68525); +#70183 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #70184); +#70184 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','=>[0:1:1:20]','',#68519, + #68542,$); +#70185 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#68544)); +#70186 = SHAPE_DEFINITION_REPRESENTATION(#70187,#70193); +#70187 = PRODUCT_DEFINITION_SHAPE('','',#70188); +#70188 = PRODUCT_DEFINITION('design','',#70189,#70192); +#70189 = PRODUCT_DEFINITION_FORMATION('','',#70190); +#70190 = PRODUCT('JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal', + 'JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal','',(#70191)); +#70191 = PRODUCT_CONTEXT('',#2,'mechanical'); +#70192 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#70193 = SHAPE_REPRESENTATION('',(#11,#70194),#70198); +#70194 = AXIS2_PLACEMENT_3D('',#70195,#70196,#70197); +#70195 = CARTESIAN_POINT('',(0.,0.,0.)); +#70196 = DIRECTION('',(0.,0.,1.)); +#70197 = DIRECTION('',(1.,0.,-0.)); +#70198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#70202)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#70199,#70200,#70201)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#70199 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#70200 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#70201 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#70202 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#70199, + 'distance_accuracy_value','confusion accuracy'); +#70203 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#70204,#70206); +#70204 = ( REPRESENTATION_RELATIONSHIP('','',#70193,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#70205) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#70205 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#70206 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #70207); +#70207 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','U_OLED1','',#5,#70188,$); +#70208 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#70190)); +#70209 = SHAPE_DEFINITION_REPRESENTATION(#70210,#70216); +#70210 = PRODUCT_DEFINITION_SHAPE('','',#70211); +#70211 = PRODUCT_DEFINITION('design','',#70212,#70215); +#70212 = PRODUCT_DEFINITION_FORMATION('','',#70213); +#70213 = PRODUCT('JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal', + 'JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal','',(#70214)); +#70214 = PRODUCT_CONTEXT('',#2,'mechanical'); +#70215 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#70216 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#70217),#73021); +#70217 = MANIFOLD_SOLID_BREP('',#70218); +#70218 = CLOSED_SHELL('',(#70219,#70323,#70530,#70554,#70578,#70602, + #70626,#70787,#70843,#70867,#70891,#70915,#70939,#71071,#71143, + #71167,#71198,#71222,#71253,#71277,#71317,#71341,#71374,#71414, + #71438,#71471,#71511,#71535,#71568,#71608,#71632,#71665,#71692, + #71710,#71735,#71759,#71813,#71837,#71861,#71878,#71902,#71949, + #71973,#71997,#72014,#72031,#72071,#72088,#72102,#72119,#72136, + #72153,#72170,#72187,#72211,#72228,#72245,#72257,#72277,#72289, + #72301,#72318,#72330,#72347,#72359,#72376,#72388,#72405,#72417, + #72429,#72577,#72589,#72620,#72644,#72668,#72685,#72716,#72740, + #72764,#72781,#72812,#72836,#72860,#72877,#72908,#72932,#72956, + #72973,#72985,#72997,#73009)); +#70219 = ADVANCED_FACE('',(#70220),#70318,.F.); +#70220 = FACE_BOUND('',#70221,.F.); +#70221 = EDGE_LOOP('',(#70222,#70232,#70240,#70248,#70256,#70264,#70272, + #70280,#70288,#70296,#70304,#70312)); +#70222 = ORIENTED_EDGE('',*,*,#70223,.F.); +#70223 = EDGE_CURVE('',#70224,#70226,#70228,.T.); +#70224 = VERTEX_POINT('',#70225); +#70225 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70226 = VERTEX_POINT('',#70227); +#70227 = CARTESIAN_POINT('',(-3.,-0.975,6.E-02)); +#70228 = LINE('',#70229,#70230); +#70229 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70230 = VECTOR('',#70231,1.); +#70231 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70232 = ORIENTED_EDGE('',*,*,#70233,.T.); +#70233 = EDGE_CURVE('',#70224,#70234,#70236,.T.); +#70234 = VERTEX_POINT('',#70235); +#70235 = CARTESIAN_POINT('',(-3.,1.775,1.46)); +#70236 = LINE('',#70237,#70238); +#70237 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70238 = VECTOR('',#70239,1.); +#70239 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70240 = ORIENTED_EDGE('',*,*,#70241,.T.); +#70241 = EDGE_CURVE('',#70234,#70242,#70244,.T.); +#70242 = VERTEX_POINT('',#70243); +#70243 = CARTESIAN_POINT('',(-3.,1.225,1.46)); +#70244 = LINE('',#70245,#70246); +#70245 = CARTESIAN_POINT('',(-3.,1.775,1.46)); +#70246 = VECTOR('',#70247,1.); +#70247 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70248 = ORIENTED_EDGE('',*,*,#70249,.T.); +#70249 = EDGE_CURVE('',#70242,#70250,#70252,.T.); +#70250 = VERTEX_POINT('',#70251); +#70251 = CARTESIAN_POINT('',(-3.,1.225,2.46)); +#70252 = LINE('',#70253,#70254); +#70253 = CARTESIAN_POINT('',(-3.,1.225,1.46)); +#70254 = VECTOR('',#70255,1.); +#70255 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70256 = ORIENTED_EDGE('',*,*,#70257,.T.); +#70257 = EDGE_CURVE('',#70250,#70258,#70260,.T.); +#70258 = VERTEX_POINT('',#70259); +#70259 = CARTESIAN_POINT('',(-3.,0.575,2.46)); +#70260 = LINE('',#70261,#70262); +#70261 = CARTESIAN_POINT('',(-3.,1.225,2.46)); +#70262 = VECTOR('',#70263,1.); +#70263 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70264 = ORIENTED_EDGE('',*,*,#70265,.T.); +#70265 = EDGE_CURVE('',#70258,#70266,#70268,.T.); +#70266 = VERTEX_POINT('',#70267); +#70267 = CARTESIAN_POINT('',(-3.,0.286,2.96)); +#70268 = LINE('',#70269,#70270); +#70269 = CARTESIAN_POINT('',(-3.,0.575,2.46)); +#70270 = VECTOR('',#70271,1.); +#70271 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#70272 = ORIENTED_EDGE('',*,*,#70273,.T.); +#70273 = EDGE_CURVE('',#70266,#70274,#70276,.T.); +#70274 = VERTEX_POINT('',#70275); +#70275 = CARTESIAN_POINT('',(-3.,-2.475,2.96)); +#70276 = LINE('',#70277,#70278); +#70277 = CARTESIAN_POINT('',(-3.,1.775,2.96)); +#70278 = VECTOR('',#70279,1.); +#70279 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70280 = ORIENTED_EDGE('',*,*,#70281,.F.); +#70281 = EDGE_CURVE('',#70282,#70274,#70284,.T.); +#70282 = VERTEX_POINT('',#70283); +#70283 = CARTESIAN_POINT('',(-3.,-2.475,1.26)); +#70284 = LINE('',#70285,#70286); +#70285 = CARTESIAN_POINT('',(-3.,-2.475,6.E-02)); +#70286 = VECTOR('',#70287,1.); +#70287 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70288 = ORIENTED_EDGE('',*,*,#70289,.T.); +#70289 = EDGE_CURVE('',#70282,#70290,#70292,.T.); +#70290 = VERTEX_POINT('',#70291); +#70291 = CARTESIAN_POINT('',(-3.,-1.975,1.26)); +#70292 = LINE('',#70293,#70294); +#70293 = CARTESIAN_POINT('',(-3.,-2.475,1.26)); +#70294 = VECTOR('',#70295,1.); +#70295 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70296 = ORIENTED_EDGE('',*,*,#70297,.T.); +#70297 = EDGE_CURVE('',#70290,#70298,#70300,.T.); +#70298 = VERTEX_POINT('',#70299); +#70299 = CARTESIAN_POINT('',(-3.,-1.975,0.61)); +#70300 = LINE('',#70301,#70302); +#70301 = CARTESIAN_POINT('',(-3.,-1.975,1.26)); +#70302 = VECTOR('',#70303,1.); +#70303 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70304 = ORIENTED_EDGE('',*,*,#70305,.T.); +#70305 = EDGE_CURVE('',#70298,#70306,#70308,.T.); +#70306 = VERTEX_POINT('',#70307); +#70307 = CARTESIAN_POINT('',(-3.,-0.975,0.61)); +#70308 = LINE('',#70309,#70310); +#70309 = CARTESIAN_POINT('',(-3.,-1.975,0.61)); +#70310 = VECTOR('',#70311,1.); +#70311 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70312 = ORIENTED_EDGE('',*,*,#70313,.T.); +#70313 = EDGE_CURVE('',#70306,#70226,#70314,.T.); +#70314 = LINE('',#70315,#70316); +#70315 = CARTESIAN_POINT('',(-3.,-0.975,0.61)); +#70316 = VECTOR('',#70317,1.); +#70317 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70318 = PLANE('',#70319); +#70319 = AXIS2_PLACEMENT_3D('',#70320,#70321,#70322); +#70320 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70321 = DIRECTION('',(1.,0.,0.)); +#70322 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70323 = ADVANCED_FACE('',(#70324),#70525,.F.); +#70324 = FACE_BOUND('',#70325,.F.); +#70325 = EDGE_LOOP('',(#70326,#70336,#70344,#70352,#70360,#70368,#70376, + #70384,#70392,#70400,#70408,#70416,#70424,#70432,#70440,#70448, + #70456,#70464,#70470,#70471,#70479,#70487,#70495,#70503,#70511, + #70519)); +#70326 = ORIENTED_EDGE('',*,*,#70327,.F.); +#70327 = EDGE_CURVE('',#70328,#70330,#70332,.T.); +#70328 = VERTEX_POINT('',#70329); +#70329 = CARTESIAN_POINT('',(3.,1.775,6.E-02)); +#70330 = VERTEX_POINT('',#70331); +#70331 = CARTESIAN_POINT('',(3.,-0.975,6.E-02)); +#70332 = LINE('',#70333,#70334); +#70333 = CARTESIAN_POINT('',(3.,1.775,6.E-02)); +#70334 = VECTOR('',#70335,1.); +#70335 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70336 = ORIENTED_EDGE('',*,*,#70337,.F.); +#70337 = EDGE_CURVE('',#70338,#70328,#70340,.T.); +#70338 = VERTEX_POINT('',#70339); +#70339 = CARTESIAN_POINT('',(1.6,1.775,6.E-02)); +#70340 = LINE('',#70341,#70342); +#70341 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70342 = VECTOR('',#70343,1.); +#70343 = DIRECTION('',(1.,0.,0.)); +#70344 = ORIENTED_EDGE('',*,*,#70345,.F.); +#70345 = EDGE_CURVE('',#70346,#70338,#70348,.T.); +#70346 = VERTEX_POINT('',#70347); +#70347 = CARTESIAN_POINT('',(1.6,1.675,6.E-02)); +#70348 = LINE('',#70349,#70350); +#70349 = CARTESIAN_POINT('',(1.6,1.675,6.E-02)); +#70350 = VECTOR('',#70351,1.); +#70351 = DIRECTION('',(0.,1.,0.)); +#70352 = ORIENTED_EDGE('',*,*,#70353,.F.); +#70353 = EDGE_CURVE('',#70354,#70346,#70356,.T.); +#70354 = VERTEX_POINT('',#70355); +#70355 = CARTESIAN_POINT('',(1.4,1.675,6.E-02)); +#70356 = LINE('',#70357,#70358); +#70357 = CARTESIAN_POINT('',(1.4,1.675,6.E-02)); +#70358 = VECTOR('',#70359,1.); +#70359 = DIRECTION('',(1.,0.,0.)); +#70360 = ORIENTED_EDGE('',*,*,#70361,.T.); +#70361 = EDGE_CURVE('',#70354,#70362,#70364,.T.); +#70362 = VERTEX_POINT('',#70363); +#70363 = CARTESIAN_POINT('',(1.4,1.775,6.E-02)); +#70364 = LINE('',#70365,#70366); +#70365 = CARTESIAN_POINT('',(1.4,1.675,6.E-02)); +#70366 = VECTOR('',#70367,1.); +#70367 = DIRECTION('',(0.,1.,0.)); +#70368 = ORIENTED_EDGE('',*,*,#70369,.F.); +#70369 = EDGE_CURVE('',#70370,#70362,#70372,.T.); +#70370 = VERTEX_POINT('',#70371); +#70371 = CARTESIAN_POINT('',(0.6,1.775,6.E-02)); +#70372 = LINE('',#70373,#70374); +#70373 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70374 = VECTOR('',#70375,1.); +#70375 = DIRECTION('',(1.,0.,0.)); +#70376 = ORIENTED_EDGE('',*,*,#70377,.F.); +#70377 = EDGE_CURVE('',#70378,#70370,#70380,.T.); +#70378 = VERTEX_POINT('',#70379); +#70379 = CARTESIAN_POINT('',(0.6,1.675,6.E-02)); +#70380 = LINE('',#70381,#70382); +#70381 = CARTESIAN_POINT('',(0.6,1.675,6.E-02)); +#70382 = VECTOR('',#70383,1.); +#70383 = DIRECTION('',(0.,1.,0.)); +#70384 = ORIENTED_EDGE('',*,*,#70385,.F.); +#70385 = EDGE_CURVE('',#70386,#70378,#70388,.T.); +#70386 = VERTEX_POINT('',#70387); +#70387 = CARTESIAN_POINT('',(0.4,1.675,6.E-02)); +#70388 = LINE('',#70389,#70390); +#70389 = CARTESIAN_POINT('',(0.4,1.675,6.E-02)); +#70390 = VECTOR('',#70391,1.); +#70391 = DIRECTION('',(1.,0.,0.)); +#70392 = ORIENTED_EDGE('',*,*,#70393,.T.); +#70393 = EDGE_CURVE('',#70386,#70394,#70396,.T.); +#70394 = VERTEX_POINT('',#70395); +#70395 = CARTESIAN_POINT('',(0.4,1.775,6.E-02)); +#70396 = LINE('',#70397,#70398); +#70397 = CARTESIAN_POINT('',(0.4,1.675,6.E-02)); +#70398 = VECTOR('',#70399,1.); +#70399 = DIRECTION('',(0.,1.,0.)); +#70400 = ORIENTED_EDGE('',*,*,#70401,.F.); +#70401 = EDGE_CURVE('',#70402,#70394,#70404,.T.); +#70402 = VERTEX_POINT('',#70403); +#70403 = CARTESIAN_POINT('',(-0.4,1.775,6.E-02)); +#70404 = LINE('',#70405,#70406); +#70405 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70406 = VECTOR('',#70407,1.); +#70407 = DIRECTION('',(1.,0.,0.)); +#70408 = ORIENTED_EDGE('',*,*,#70409,.F.); +#70409 = EDGE_CURVE('',#70410,#70402,#70412,.T.); +#70410 = VERTEX_POINT('',#70411); +#70411 = CARTESIAN_POINT('',(-0.4,1.675,6.E-02)); +#70412 = LINE('',#70413,#70414); +#70413 = CARTESIAN_POINT('',(-0.4,1.675,6.E-02)); +#70414 = VECTOR('',#70415,1.); +#70415 = DIRECTION('',(0.,1.,0.)); +#70416 = ORIENTED_EDGE('',*,*,#70417,.F.); +#70417 = EDGE_CURVE('',#70418,#70410,#70420,.T.); +#70418 = VERTEX_POINT('',#70419); +#70419 = CARTESIAN_POINT('',(-0.6,1.675,6.E-02)); +#70420 = LINE('',#70421,#70422); +#70421 = CARTESIAN_POINT('',(-0.6,1.675,6.E-02)); +#70422 = VECTOR('',#70423,1.); +#70423 = DIRECTION('',(1.,0.,0.)); +#70424 = ORIENTED_EDGE('',*,*,#70425,.T.); +#70425 = EDGE_CURVE('',#70418,#70426,#70428,.T.); +#70426 = VERTEX_POINT('',#70427); +#70427 = CARTESIAN_POINT('',(-0.6,1.775,6.E-02)); +#70428 = LINE('',#70429,#70430); +#70429 = CARTESIAN_POINT('',(-0.6,1.675,6.E-02)); +#70430 = VECTOR('',#70431,1.); +#70431 = DIRECTION('',(0.,1.,0.)); +#70432 = ORIENTED_EDGE('',*,*,#70433,.F.); +#70433 = EDGE_CURVE('',#70434,#70426,#70436,.T.); +#70434 = VERTEX_POINT('',#70435); +#70435 = CARTESIAN_POINT('',(-1.4,1.775,6.E-02)); +#70436 = LINE('',#70437,#70438); +#70437 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70438 = VECTOR('',#70439,1.); +#70439 = DIRECTION('',(1.,0.,0.)); +#70440 = ORIENTED_EDGE('',*,*,#70441,.F.); +#70441 = EDGE_CURVE('',#70442,#70434,#70444,.T.); +#70442 = VERTEX_POINT('',#70443); +#70443 = CARTESIAN_POINT('',(-1.4,1.675,6.E-02)); +#70444 = LINE('',#70445,#70446); +#70445 = CARTESIAN_POINT('',(-1.4,1.675,6.E-02)); +#70446 = VECTOR('',#70447,1.); +#70447 = DIRECTION('',(0.,1.,0.)); +#70448 = ORIENTED_EDGE('',*,*,#70449,.F.); +#70449 = EDGE_CURVE('',#70450,#70442,#70452,.T.); +#70450 = VERTEX_POINT('',#70451); +#70451 = CARTESIAN_POINT('',(-1.6,1.675,6.E-02)); +#70452 = LINE('',#70453,#70454); +#70453 = CARTESIAN_POINT('',(-1.6,1.675,6.E-02)); +#70454 = VECTOR('',#70455,1.); +#70455 = DIRECTION('',(1.,0.,0.)); +#70456 = ORIENTED_EDGE('',*,*,#70457,.T.); +#70457 = EDGE_CURVE('',#70450,#70458,#70460,.T.); +#70458 = VERTEX_POINT('',#70459); +#70459 = CARTESIAN_POINT('',(-1.6,1.775,6.E-02)); +#70460 = LINE('',#70461,#70462); +#70461 = CARTESIAN_POINT('',(-1.6,1.675,6.E-02)); +#70462 = VECTOR('',#70463,1.); +#70463 = DIRECTION('',(0.,1.,0.)); +#70464 = ORIENTED_EDGE('',*,*,#70465,.F.); +#70465 = EDGE_CURVE('',#70224,#70458,#70466,.T.); +#70466 = LINE('',#70467,#70468); +#70467 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70468 = VECTOR('',#70469,1.); +#70469 = DIRECTION('',(1.,0.,0.)); +#70470 = ORIENTED_EDGE('',*,*,#70223,.T.); +#70471 = ORIENTED_EDGE('',*,*,#70472,.T.); +#70472 = EDGE_CURVE('',#70226,#70473,#70475,.T.); +#70473 = VERTEX_POINT('',#70474); +#70474 = CARTESIAN_POINT('',(-2.7,-0.975,6.E-02)); +#70475 = LINE('',#70476,#70477); +#70476 = CARTESIAN_POINT('',(-3.,-0.975,6.E-02)); +#70477 = VECTOR('',#70478,1.); +#70478 = DIRECTION('',(1.,0.,0.)); +#70479 = ORIENTED_EDGE('',*,*,#70480,.T.); +#70480 = EDGE_CURVE('',#70473,#70481,#70483,.T.); +#70481 = VERTEX_POINT('',#70482); +#70482 = CARTESIAN_POINT('',(-2.5,-0.975,6.E-02)); +#70483 = LINE('',#70484,#70485); +#70484 = CARTESIAN_POINT('',(-3.,-0.975,6.E-02)); +#70485 = VECTOR('',#70486,1.); +#70486 = DIRECTION('',(1.,0.,0.)); +#70487 = ORIENTED_EDGE('',*,*,#70488,.T.); +#70488 = EDGE_CURVE('',#70481,#70489,#70491,.T.); +#70489 = VERTEX_POINT('',#70490); +#70490 = CARTESIAN_POINT('',(-2.5,-2.475,6.E-02)); +#70491 = LINE('',#70492,#70493); +#70492 = CARTESIAN_POINT('',(-2.5,-0.975,6.E-02)); +#70493 = VECTOR('',#70494,1.); +#70494 = DIRECTION('',(0.,-1.,2.590520390792E-16)); +#70495 = ORIENTED_EDGE('',*,*,#70496,.T.); +#70496 = EDGE_CURVE('',#70489,#70497,#70499,.T.); +#70497 = VERTEX_POINT('',#70498); +#70498 = CARTESIAN_POINT('',(2.5,-2.475,6.E-02)); +#70499 = LINE('',#70500,#70501); +#70500 = CARTESIAN_POINT('',(-3.,-2.475,6.E-02)); +#70501 = VECTOR('',#70502,1.); +#70502 = DIRECTION('',(1.,0.,0.)); +#70503 = ORIENTED_EDGE('',*,*,#70504,.F.); +#70504 = EDGE_CURVE('',#70505,#70497,#70507,.T.); +#70505 = VERTEX_POINT('',#70506); +#70506 = CARTESIAN_POINT('',(2.5,-0.975,6.E-02)); +#70507 = LINE('',#70508,#70509); +#70508 = CARTESIAN_POINT('',(2.5,-0.975,6.E-02)); +#70509 = VECTOR('',#70510,1.); +#70510 = DIRECTION('',(0.,-1.,2.590520390792E-16)); +#70511 = ORIENTED_EDGE('',*,*,#70512,.T.); +#70512 = EDGE_CURVE('',#70505,#70513,#70515,.T.); +#70513 = VERTEX_POINT('',#70514); +#70514 = CARTESIAN_POINT('',(2.7,-0.975,6.E-02)); +#70515 = LINE('',#70516,#70517); +#70516 = CARTESIAN_POINT('',(2.5,-0.975,6.E-02)); +#70517 = VECTOR('',#70518,1.); +#70518 = DIRECTION('',(1.,0.,0.)); +#70519 = ORIENTED_EDGE('',*,*,#70520,.T.); +#70520 = EDGE_CURVE('',#70513,#70330,#70521,.T.); +#70521 = LINE('',#70522,#70523); +#70522 = CARTESIAN_POINT('',(2.5,-0.975,6.E-02)); +#70523 = VECTOR('',#70524,1.); +#70524 = DIRECTION('',(1.,0.,0.)); +#70525 = PLANE('',#70526); +#70526 = AXIS2_PLACEMENT_3D('',#70527,#70528,#70529); +#70527 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#70528 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70529 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70530 = ADVANCED_FACE('',(#70531),#70549,.F.); +#70531 = FACE_BOUND('',#70532,.F.); +#70532 = EDGE_LOOP('',(#70533,#70534,#70542,#70548)); +#70533 = ORIENTED_EDGE('',*,*,#70313,.F.); +#70534 = ORIENTED_EDGE('',*,*,#70535,.T.); +#70535 = EDGE_CURVE('',#70306,#70536,#70538,.T.); +#70536 = VERTEX_POINT('',#70537); +#70537 = CARTESIAN_POINT('',(-2.7,-0.975,0.61)); +#70538 = LINE('',#70539,#70540); +#70539 = CARTESIAN_POINT('',(-3.,-0.975,0.61)); +#70540 = VECTOR('',#70541,1.); +#70541 = DIRECTION('',(1.,0.,0.)); +#70542 = ORIENTED_EDGE('',*,*,#70543,.T.); +#70543 = EDGE_CURVE('',#70536,#70473,#70544,.T.); +#70544 = LINE('',#70545,#70546); +#70545 = CARTESIAN_POINT('',(-2.7,-0.975,0.61)); +#70546 = VECTOR('',#70547,1.); +#70547 = DIRECTION('',(0.,0.,-1.)); +#70548 = ORIENTED_EDGE('',*,*,#70472,.F.); +#70549 = PLANE('',#70550); +#70550 = AXIS2_PLACEMENT_3D('',#70551,#70552,#70553); +#70551 = CARTESIAN_POINT('',(-3.,-0.975,0.61)); +#70552 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70553 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70554 = ADVANCED_FACE('',(#70555),#70573,.F.); +#70555 = FACE_BOUND('',#70556,.F.); +#70556 = EDGE_LOOP('',(#70557,#70558,#70566,#70572)); +#70557 = ORIENTED_EDGE('',*,*,#70305,.F.); +#70558 = ORIENTED_EDGE('',*,*,#70559,.T.); +#70559 = EDGE_CURVE('',#70298,#70560,#70562,.T.); +#70560 = VERTEX_POINT('',#70561); +#70561 = CARTESIAN_POINT('',(-2.7,-1.975,0.61)); +#70562 = LINE('',#70563,#70564); +#70563 = CARTESIAN_POINT('',(-3.,-1.975,0.61)); +#70564 = VECTOR('',#70565,1.); +#70565 = DIRECTION('',(1.,0.,0.)); +#70566 = ORIENTED_EDGE('',*,*,#70567,.T.); +#70567 = EDGE_CURVE('',#70560,#70536,#70568,.T.); +#70568 = LINE('',#70569,#70570); +#70569 = CARTESIAN_POINT('',(-2.7,-1.975,0.61)); +#70570 = VECTOR('',#70571,1.); +#70571 = DIRECTION('',(0.,1.,0.)); +#70572 = ORIENTED_EDGE('',*,*,#70535,.F.); +#70573 = PLANE('',#70574); +#70574 = AXIS2_PLACEMENT_3D('',#70575,#70576,#70577); +#70575 = CARTESIAN_POINT('',(-3.,-1.975,0.61)); +#70576 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70577 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70578 = ADVANCED_FACE('',(#70579),#70597,.F.); +#70579 = FACE_BOUND('',#70580,.F.); +#70580 = EDGE_LOOP('',(#70581,#70582,#70590,#70596)); +#70581 = ORIENTED_EDGE('',*,*,#70297,.F.); +#70582 = ORIENTED_EDGE('',*,*,#70583,.T.); +#70583 = EDGE_CURVE('',#70290,#70584,#70586,.T.); +#70584 = VERTEX_POINT('',#70585); +#70585 = CARTESIAN_POINT('',(-2.7,-1.975,1.26)); +#70586 = LINE('',#70587,#70588); +#70587 = CARTESIAN_POINT('',(-3.,-1.975,1.26)); +#70588 = VECTOR('',#70589,1.); +#70589 = DIRECTION('',(1.,0.,0.)); +#70590 = ORIENTED_EDGE('',*,*,#70591,.T.); +#70591 = EDGE_CURVE('',#70584,#70560,#70592,.T.); +#70592 = LINE('',#70593,#70594); +#70593 = CARTESIAN_POINT('',(-2.7,-1.975,1.26)); +#70594 = VECTOR('',#70595,1.); +#70595 = DIRECTION('',(0.,0.,-1.)); +#70596 = ORIENTED_EDGE('',*,*,#70559,.F.); +#70597 = PLANE('',#70598); +#70598 = AXIS2_PLACEMENT_3D('',#70599,#70600,#70601); +#70599 = CARTESIAN_POINT('',(-3.,-1.975,1.26)); +#70600 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70601 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70602 = ADVANCED_FACE('',(#70603),#70621,.F.); +#70603 = FACE_BOUND('',#70604,.F.); +#70604 = EDGE_LOOP('',(#70605,#70606,#70614,#70620)); +#70605 = ORIENTED_EDGE('',*,*,#70289,.F.); +#70606 = ORIENTED_EDGE('',*,*,#70607,.T.); +#70607 = EDGE_CURVE('',#70282,#70608,#70610,.T.); +#70608 = VERTEX_POINT('',#70609); +#70609 = CARTESIAN_POINT('',(-2.7,-2.475,1.26)); +#70610 = LINE('',#70611,#70612); +#70611 = CARTESIAN_POINT('',(-3.,-2.475,1.26)); +#70612 = VECTOR('',#70613,1.); +#70613 = DIRECTION('',(1.,0.,0.)); +#70614 = ORIENTED_EDGE('',*,*,#70615,.T.); +#70615 = EDGE_CURVE('',#70608,#70584,#70616,.T.); +#70616 = LINE('',#70617,#70618); +#70617 = CARTESIAN_POINT('',(-2.7,-2.475,1.26)); +#70618 = VECTOR('',#70619,1.); +#70619 = DIRECTION('',(0.,1.,0.)); +#70620 = ORIENTED_EDGE('',*,*,#70583,.F.); +#70621 = PLANE('',#70622); +#70622 = AXIS2_PLACEMENT_3D('',#70623,#70624,#70625); +#70623 = CARTESIAN_POINT('',(-3.,-2.475,1.26)); +#70624 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70625 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70626 = ADVANCED_FACE('',(#70627,#70684),#70782,.T.); +#70627 = FACE_BOUND('',#70628,.T.); +#70628 = EDGE_LOOP('',(#70629,#70630,#70631,#70639,#70645,#70646,#70654, + #70662,#70670,#70678)); +#70629 = ORIENTED_EDGE('',*,*,#70281,.F.); +#70630 = ORIENTED_EDGE('',*,*,#70607,.T.); +#70631 = ORIENTED_EDGE('',*,*,#70632,.T.); +#70632 = EDGE_CURVE('',#70608,#70633,#70635,.T.); +#70633 = VERTEX_POINT('',#70634); +#70634 = CARTESIAN_POINT('',(-2.5,-2.475,1.26)); +#70635 = LINE('',#70636,#70637); +#70636 = CARTESIAN_POINT('',(-3.,-2.475,1.26)); +#70637 = VECTOR('',#70638,1.); +#70638 = DIRECTION('',(1.,0.,0.)); +#70639 = ORIENTED_EDGE('',*,*,#70640,.F.); +#70640 = EDGE_CURVE('',#70489,#70633,#70641,.T.); +#70641 = LINE('',#70642,#70643); +#70642 = CARTESIAN_POINT('',(-2.5,-2.475,6.E-02)); +#70643 = VECTOR('',#70644,1.); +#70644 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70645 = ORIENTED_EDGE('',*,*,#70496,.T.); +#70646 = ORIENTED_EDGE('',*,*,#70647,.T.); +#70647 = EDGE_CURVE('',#70497,#70648,#70650,.T.); +#70648 = VERTEX_POINT('',#70649); +#70649 = CARTESIAN_POINT('',(2.5,-2.475,1.26)); +#70650 = LINE('',#70651,#70652); +#70651 = CARTESIAN_POINT('',(2.5,-2.475,6.E-02)); +#70652 = VECTOR('',#70653,1.); +#70653 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70654 = ORIENTED_EDGE('',*,*,#70655,.T.); +#70655 = EDGE_CURVE('',#70648,#70656,#70658,.T.); +#70656 = VERTEX_POINT('',#70657); +#70657 = CARTESIAN_POINT('',(2.7,-2.475,1.26)); +#70658 = LINE('',#70659,#70660); +#70659 = CARTESIAN_POINT('',(2.5,-2.475,1.26)); +#70660 = VECTOR('',#70661,1.); +#70661 = DIRECTION('',(1.,0.,0.)); +#70662 = ORIENTED_EDGE('',*,*,#70663,.T.); +#70663 = EDGE_CURVE('',#70656,#70664,#70666,.T.); +#70664 = VERTEX_POINT('',#70665); +#70665 = CARTESIAN_POINT('',(3.,-2.475,1.26)); +#70666 = LINE('',#70667,#70668); +#70667 = CARTESIAN_POINT('',(2.5,-2.475,1.26)); +#70668 = VECTOR('',#70669,1.); +#70669 = DIRECTION('',(1.,0.,0.)); +#70670 = ORIENTED_EDGE('',*,*,#70671,.T.); +#70671 = EDGE_CURVE('',#70664,#70672,#70674,.T.); +#70672 = VERTEX_POINT('',#70673); +#70673 = CARTESIAN_POINT('',(3.,-2.475,2.96)); +#70674 = LINE('',#70675,#70676); +#70675 = CARTESIAN_POINT('',(3.,-2.475,6.E-02)); +#70676 = VECTOR('',#70677,1.); +#70677 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70678 = ORIENTED_EDGE('',*,*,#70679,.F.); +#70679 = EDGE_CURVE('',#70274,#70672,#70680,.T.); +#70680 = LINE('',#70681,#70682); +#70681 = CARTESIAN_POINT('',(-3.,-2.475,2.96)); +#70682 = VECTOR('',#70683,1.); +#70683 = DIRECTION('',(1.,0.,0.)); +#70684 = FACE_BOUND('',#70685,.T.); +#70685 = EDGE_LOOP('',(#70686,#70696,#70704,#70712,#70720,#70728,#70736, + #70744,#70752,#70760,#70768,#70776)); +#70686 = ORIENTED_EDGE('',*,*,#70687,.F.); +#70687 = EDGE_CURVE('',#70688,#70690,#70692,.T.); +#70688 = VERTEX_POINT('',#70689); +#70689 = CARTESIAN_POINT('',(2.2,-2.475,0.46)); +#70690 = VERTEX_POINT('',#70691); +#70691 = CARTESIAN_POINT('',(2.2,-2.475,1.46)); +#70692 = LINE('',#70693,#70694); +#70693 = CARTESIAN_POINT('',(2.2,-2.475,0.46)); +#70694 = VECTOR('',#70695,1.); +#70695 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70696 = ORIENTED_EDGE('',*,*,#70697,.F.); +#70697 = EDGE_CURVE('',#70698,#70688,#70700,.T.); +#70698 = VERTEX_POINT('',#70699); +#70699 = CARTESIAN_POINT('',(-2.2,-2.475,0.46)); +#70700 = LINE('',#70701,#70702); +#70701 = CARTESIAN_POINT('',(-2.2,-2.475,0.46)); +#70702 = VECTOR('',#70703,1.); +#70703 = DIRECTION('',(1.,0.,0.)); +#70704 = ORIENTED_EDGE('',*,*,#70705,.F.); +#70705 = EDGE_CURVE('',#70706,#70698,#70708,.T.); +#70706 = VERTEX_POINT('',#70707); +#70707 = CARTESIAN_POINT('',(-2.2,-2.475,1.46)); +#70708 = LINE('',#70709,#70710); +#70709 = CARTESIAN_POINT('',(-2.2,-2.475,2.56)); +#70710 = VECTOR('',#70711,1.); +#70711 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70712 = ORIENTED_EDGE('',*,*,#70713,.F.); +#70713 = EDGE_CURVE('',#70714,#70706,#70716,.T.); +#70714 = VERTEX_POINT('',#70715); +#70715 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#70716 = LINE('',#70717,#70718); +#70717 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#70718 = VECTOR('',#70719,1.); +#70719 = DIRECTION('',(1.,0.,0.)); +#70720 = ORIENTED_EDGE('',*,*,#70721,.F.); +#70721 = EDGE_CURVE('',#70722,#70714,#70724,.T.); +#70722 = VERTEX_POINT('',#70723); +#70723 = CARTESIAN_POINT('',(-2.55,-2.475,2.06)); +#70724 = LINE('',#70725,#70726); +#70725 = CARTESIAN_POINT('',(-2.55,-2.475,2.06)); +#70726 = VECTOR('',#70727,1.); +#70727 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70728 = ORIENTED_EDGE('',*,*,#70729,.F.); +#70729 = EDGE_CURVE('',#70730,#70722,#70732,.T.); +#70730 = VERTEX_POINT('',#70731); +#70731 = CARTESIAN_POINT('',(-2.2,-2.475,2.06)); +#70732 = LINE('',#70733,#70734); +#70733 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#70734 = VECTOR('',#70735,1.); +#70735 = DIRECTION('',(-1.,0.,0.)); +#70736 = ORIENTED_EDGE('',*,*,#70737,.F.); +#70737 = EDGE_CURVE('',#70738,#70730,#70740,.T.); +#70738 = VERTEX_POINT('',#70739); +#70739 = CARTESIAN_POINT('',(-2.2,-2.475,2.56)); +#70740 = LINE('',#70741,#70742); +#70741 = CARTESIAN_POINT('',(-2.2,-2.475,2.56)); +#70742 = VECTOR('',#70743,1.); +#70743 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70744 = ORIENTED_EDGE('',*,*,#70745,.F.); +#70745 = EDGE_CURVE('',#70746,#70738,#70748,.T.); +#70746 = VERTEX_POINT('',#70747); +#70747 = CARTESIAN_POINT('',(2.2,-2.475,2.56)); +#70748 = LINE('',#70749,#70750); +#70749 = CARTESIAN_POINT('',(2.2,-2.475,2.56)); +#70750 = VECTOR('',#70751,1.); +#70751 = DIRECTION('',(-1.,0.,0.)); +#70752 = ORIENTED_EDGE('',*,*,#70753,.F.); +#70753 = EDGE_CURVE('',#70754,#70746,#70756,.T.); +#70754 = VERTEX_POINT('',#70755); +#70755 = CARTESIAN_POINT('',(2.2,-2.475,2.06)); +#70756 = LINE('',#70757,#70758); +#70757 = CARTESIAN_POINT('',(2.2,-2.475,0.46)); +#70758 = VECTOR('',#70759,1.); +#70759 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70760 = ORIENTED_EDGE('',*,*,#70761,.F.); +#70761 = EDGE_CURVE('',#70762,#70754,#70764,.T.); +#70762 = VERTEX_POINT('',#70763); +#70763 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#70764 = LINE('',#70765,#70766); +#70765 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#70766 = VECTOR('',#70767,1.); +#70767 = DIRECTION('',(-1.,0.,0.)); +#70768 = ORIENTED_EDGE('',*,*,#70769,.F.); +#70769 = EDGE_CURVE('',#70770,#70762,#70772,.T.); +#70770 = VERTEX_POINT('',#70771); +#70771 = CARTESIAN_POINT('',(2.55,-2.475,1.46)); +#70772 = LINE('',#70773,#70774); +#70773 = CARTESIAN_POINT('',(2.55,-2.475,1.46)); +#70774 = VECTOR('',#70775,1.); +#70775 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70776 = ORIENTED_EDGE('',*,*,#70777,.F.); +#70777 = EDGE_CURVE('',#70690,#70770,#70778,.T.); +#70778 = LINE('',#70779,#70780); +#70779 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#70780 = VECTOR('',#70781,1.); +#70781 = DIRECTION('',(1.,0.,0.)); +#70782 = PLANE('',#70783); +#70783 = AXIS2_PLACEMENT_3D('',#70784,#70785,#70786); +#70784 = CARTESIAN_POINT('',(-3.,-2.475,6.E-02)); +#70785 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70786 = DIRECTION('',(1.,0.,0.)); +#70787 = ADVANCED_FACE('',(#70788),#70838,.T.); +#70788 = FACE_BOUND('',#70789,.T.); +#70789 = EDGE_LOOP('',(#70790,#70800,#70808,#70814,#70815,#70816,#70824, + #70832)); +#70790 = ORIENTED_EDGE('',*,*,#70791,.F.); +#70791 = EDGE_CURVE('',#70792,#70794,#70796,.T.); +#70792 = VERTEX_POINT('',#70793); +#70793 = CARTESIAN_POINT('',(-2.5,1.775,2.96)); +#70794 = VERTEX_POINT('',#70795); +#70795 = CARTESIAN_POINT('',(2.5,1.775,2.96)); +#70796 = LINE('',#70797,#70798); +#70797 = CARTESIAN_POINT('',(-3.,1.775,2.96)); +#70798 = VECTOR('',#70799,1.); +#70799 = DIRECTION('',(1.,0.,0.)); +#70800 = ORIENTED_EDGE('',*,*,#70801,.F.); +#70801 = EDGE_CURVE('',#70802,#70792,#70804,.T.); +#70802 = VERTEX_POINT('',#70803); +#70803 = CARTESIAN_POINT('',(-2.5,0.286,2.96)); +#70804 = LINE('',#70805,#70806); +#70805 = CARTESIAN_POINT('',(-2.5,0.286,2.96)); +#70806 = VECTOR('',#70807,1.); +#70807 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70808 = ORIENTED_EDGE('',*,*,#70809,.F.); +#70809 = EDGE_CURVE('',#70266,#70802,#70810,.T.); +#70810 = LINE('',#70811,#70812); +#70811 = CARTESIAN_POINT('',(-3.,0.286,2.96)); +#70812 = VECTOR('',#70813,1.); +#70813 = DIRECTION('',(1.,0.,0.)); +#70814 = ORIENTED_EDGE('',*,*,#70273,.T.); +#70815 = ORIENTED_EDGE('',*,*,#70679,.T.); +#70816 = ORIENTED_EDGE('',*,*,#70817,.F.); +#70817 = EDGE_CURVE('',#70818,#70672,#70820,.T.); +#70818 = VERTEX_POINT('',#70819); +#70819 = CARTESIAN_POINT('',(3.,0.286,2.96)); +#70820 = LINE('',#70821,#70822); +#70821 = CARTESIAN_POINT('',(3.,1.775,2.96)); +#70822 = VECTOR('',#70823,1.); +#70823 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70824 = ORIENTED_EDGE('',*,*,#70825,.F.); +#70825 = EDGE_CURVE('',#70826,#70818,#70828,.T.); +#70826 = VERTEX_POINT('',#70827); +#70827 = CARTESIAN_POINT('',(2.5,0.286,2.96)); +#70828 = LINE('',#70829,#70830); +#70829 = CARTESIAN_POINT('',(2.5,0.286,2.96)); +#70830 = VECTOR('',#70831,1.); +#70831 = DIRECTION('',(1.,0.,0.)); +#70832 = ORIENTED_EDGE('',*,*,#70833,.T.); +#70833 = EDGE_CURVE('',#70826,#70794,#70834,.T.); +#70834 = LINE('',#70835,#70836); +#70835 = CARTESIAN_POINT('',(2.5,0.286,2.96)); +#70836 = VECTOR('',#70837,1.); +#70837 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#70838 = PLANE('',#70839); +#70839 = AXIS2_PLACEMENT_3D('',#70840,#70841,#70842); +#70840 = CARTESIAN_POINT('',(-3.,1.775,2.96)); +#70841 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70842 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70843 = ADVANCED_FACE('',(#70844),#70862,.F.); +#70844 = FACE_BOUND('',#70845,.F.); +#70845 = EDGE_LOOP('',(#70846,#70854,#70860,#70861)); +#70846 = ORIENTED_EDGE('',*,*,#70847,.T.); +#70847 = EDGE_CURVE('',#70258,#70848,#70850,.T.); +#70848 = VERTEX_POINT('',#70849); +#70849 = CARTESIAN_POINT('',(-2.5,0.575,2.46)); +#70850 = LINE('',#70851,#70852); +#70851 = CARTESIAN_POINT('',(-3.,0.575,2.46)); +#70852 = VECTOR('',#70853,1.); +#70853 = DIRECTION('',(1.,0.,0.)); +#70854 = ORIENTED_EDGE('',*,*,#70855,.T.); +#70855 = EDGE_CURVE('',#70848,#70802,#70856,.T.); +#70856 = LINE('',#70857,#70858); +#70857 = CARTESIAN_POINT('',(-2.5,0.575,2.46)); +#70858 = VECTOR('',#70859,1.); +#70859 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#70860 = ORIENTED_EDGE('',*,*,#70809,.F.); +#70861 = ORIENTED_EDGE('',*,*,#70265,.F.); +#70862 = PLANE('',#70863); +#70863 = AXIS2_PLACEMENT_3D('',#70864,#70865,#70866); +#70864 = CARTESIAN_POINT('',(-3.,0.575,2.46)); +#70865 = DIRECTION('',(0.,-0.865781720524,-0.500421834463)); +#70866 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#70867 = ADVANCED_FACE('',(#70868),#70886,.F.); +#70868 = FACE_BOUND('',#70869,.F.); +#70869 = EDGE_LOOP('',(#70870,#70878,#70884,#70885)); +#70870 = ORIENTED_EDGE('',*,*,#70871,.T.); +#70871 = EDGE_CURVE('',#70250,#70872,#70874,.T.); +#70872 = VERTEX_POINT('',#70873); +#70873 = CARTESIAN_POINT('',(-2.5,1.225,2.46)); +#70874 = LINE('',#70875,#70876); +#70875 = CARTESIAN_POINT('',(-3.,1.225,2.46)); +#70876 = VECTOR('',#70877,1.); +#70877 = DIRECTION('',(1.,0.,0.)); +#70878 = ORIENTED_EDGE('',*,*,#70879,.T.); +#70879 = EDGE_CURVE('',#70872,#70848,#70880,.T.); +#70880 = LINE('',#70881,#70882); +#70881 = CARTESIAN_POINT('',(-2.5,1.225,2.46)); +#70882 = VECTOR('',#70883,1.); +#70883 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70884 = ORIENTED_EDGE('',*,*,#70847,.F.); +#70885 = ORIENTED_EDGE('',*,*,#70257,.F.); +#70886 = PLANE('',#70887); +#70887 = AXIS2_PLACEMENT_3D('',#70888,#70889,#70890); +#70888 = CARTESIAN_POINT('',(-3.,1.225,2.46)); +#70889 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70890 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70891 = ADVANCED_FACE('',(#70892),#70910,.F.); +#70892 = FACE_BOUND('',#70893,.F.); +#70893 = EDGE_LOOP('',(#70894,#70902,#70908,#70909)); +#70894 = ORIENTED_EDGE('',*,*,#70895,.T.); +#70895 = EDGE_CURVE('',#70242,#70896,#70898,.T.); +#70896 = VERTEX_POINT('',#70897); +#70897 = CARTESIAN_POINT('',(-2.5,1.225,1.46)); +#70898 = LINE('',#70899,#70900); +#70899 = CARTESIAN_POINT('',(-3.,1.225,1.46)); +#70900 = VECTOR('',#70901,1.); +#70901 = DIRECTION('',(1.,0.,0.)); +#70902 = ORIENTED_EDGE('',*,*,#70903,.T.); +#70903 = EDGE_CURVE('',#70896,#70872,#70904,.T.); +#70904 = LINE('',#70905,#70906); +#70905 = CARTESIAN_POINT('',(-2.5,1.225,1.46)); +#70906 = VECTOR('',#70907,1.); +#70907 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70908 = ORIENTED_EDGE('',*,*,#70871,.F.); +#70909 = ORIENTED_EDGE('',*,*,#70249,.F.); +#70910 = PLANE('',#70911); +#70911 = AXIS2_PLACEMENT_3D('',#70912,#70913,#70914); +#70912 = CARTESIAN_POINT('',(-3.,1.225,1.46)); +#70913 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70914 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#70915 = ADVANCED_FACE('',(#70916),#70934,.F.); +#70916 = FACE_BOUND('',#70917,.F.); +#70917 = EDGE_LOOP('',(#70918,#70926,#70932,#70933)); +#70918 = ORIENTED_EDGE('',*,*,#70919,.T.); +#70919 = EDGE_CURVE('',#70234,#70920,#70922,.T.); +#70920 = VERTEX_POINT('',#70921); +#70921 = CARTESIAN_POINT('',(-2.5,1.775,1.46)); +#70922 = LINE('',#70923,#70924); +#70923 = CARTESIAN_POINT('',(-3.,1.775,1.46)); +#70924 = VECTOR('',#70925,1.); +#70925 = DIRECTION('',(1.,0.,0.)); +#70926 = ORIENTED_EDGE('',*,*,#70927,.T.); +#70927 = EDGE_CURVE('',#70920,#70896,#70928,.T.); +#70928 = LINE('',#70929,#70930); +#70929 = CARTESIAN_POINT('',(-2.5,1.775,1.46)); +#70930 = VECTOR('',#70931,1.); +#70931 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70932 = ORIENTED_EDGE('',*,*,#70895,.F.); +#70933 = ORIENTED_EDGE('',*,*,#70241,.F.); +#70934 = PLANE('',#70935); +#70935 = AXIS2_PLACEMENT_3D('',#70936,#70937,#70938); +#70936 = CARTESIAN_POINT('',(-3.,1.775,1.46)); +#70937 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#70938 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#70939 = ADVANCED_FACE('',(#70940),#71066,.F.); +#70940 = FACE_BOUND('',#70941,.F.); +#70941 = EDGE_LOOP('',(#70942,#70943,#70944,#70952,#70960,#70966,#70967, + #70975,#70983,#70989,#70990,#70998,#71006,#71012,#71013,#71021, + #71029,#71035,#71036,#71044,#71052,#71058,#71059,#71065)); +#70942 = ORIENTED_EDGE('',*,*,#70233,.F.); +#70943 = ORIENTED_EDGE('',*,*,#70465,.T.); +#70944 = ORIENTED_EDGE('',*,*,#70945,.T.); +#70945 = EDGE_CURVE('',#70458,#70946,#70948,.T.); +#70946 = VERTEX_POINT('',#70947); +#70947 = CARTESIAN_POINT('',(-1.6,1.775,0.2)); +#70948 = LINE('',#70949,#70950); +#70949 = CARTESIAN_POINT('',(-1.6,1.775,6.E-02)); +#70950 = VECTOR('',#70951,1.); +#70951 = DIRECTION('',(0.,0.,1.)); +#70952 = ORIENTED_EDGE('',*,*,#70953,.T.); +#70953 = EDGE_CURVE('',#70946,#70954,#70956,.T.); +#70954 = VERTEX_POINT('',#70955); +#70955 = CARTESIAN_POINT('',(-1.4,1.775,0.2)); +#70956 = LINE('',#70957,#70958); +#70957 = CARTESIAN_POINT('',(-1.6,1.775,0.2)); +#70958 = VECTOR('',#70959,1.); +#70959 = DIRECTION('',(1.,0.,0.)); +#70960 = ORIENTED_EDGE('',*,*,#70961,.F.); +#70961 = EDGE_CURVE('',#70434,#70954,#70962,.T.); +#70962 = LINE('',#70963,#70964); +#70963 = CARTESIAN_POINT('',(-1.4,1.775,6.E-02)); +#70964 = VECTOR('',#70965,1.); +#70965 = DIRECTION('',(0.,0.,1.)); +#70966 = ORIENTED_EDGE('',*,*,#70433,.T.); +#70967 = ORIENTED_EDGE('',*,*,#70968,.T.); +#70968 = EDGE_CURVE('',#70426,#70969,#70971,.T.); +#70969 = VERTEX_POINT('',#70970); +#70970 = CARTESIAN_POINT('',(-0.6,1.775,0.2)); +#70971 = LINE('',#70972,#70973); +#70972 = CARTESIAN_POINT('',(-0.6,1.775,6.E-02)); +#70973 = VECTOR('',#70974,1.); +#70974 = DIRECTION('',(0.,0.,1.)); +#70975 = ORIENTED_EDGE('',*,*,#70976,.T.); +#70976 = EDGE_CURVE('',#70969,#70977,#70979,.T.); +#70977 = VERTEX_POINT('',#70978); +#70978 = CARTESIAN_POINT('',(-0.4,1.775,0.2)); +#70979 = LINE('',#70980,#70981); +#70980 = CARTESIAN_POINT('',(-0.6,1.775,0.2)); +#70981 = VECTOR('',#70982,1.); +#70982 = DIRECTION('',(1.,0.,0.)); +#70983 = ORIENTED_EDGE('',*,*,#70984,.F.); +#70984 = EDGE_CURVE('',#70402,#70977,#70985,.T.); +#70985 = LINE('',#70986,#70987); +#70986 = CARTESIAN_POINT('',(-0.4,1.775,6.E-02)); +#70987 = VECTOR('',#70988,1.); +#70988 = DIRECTION('',(0.,0.,1.)); +#70989 = ORIENTED_EDGE('',*,*,#70401,.T.); +#70990 = ORIENTED_EDGE('',*,*,#70991,.T.); +#70991 = EDGE_CURVE('',#70394,#70992,#70994,.T.); +#70992 = VERTEX_POINT('',#70993); +#70993 = CARTESIAN_POINT('',(0.4,1.775,0.2)); +#70994 = LINE('',#70995,#70996); +#70995 = CARTESIAN_POINT('',(0.4,1.775,6.E-02)); +#70996 = VECTOR('',#70997,1.); +#70997 = DIRECTION('',(0.,0.,1.)); +#70998 = ORIENTED_EDGE('',*,*,#70999,.T.); +#70999 = EDGE_CURVE('',#70992,#71000,#71002,.T.); +#71000 = VERTEX_POINT('',#71001); +#71001 = CARTESIAN_POINT('',(0.6,1.775,0.2)); +#71002 = LINE('',#71003,#71004); +#71003 = CARTESIAN_POINT('',(0.4,1.775,0.2)); +#71004 = VECTOR('',#71005,1.); +#71005 = DIRECTION('',(1.,0.,0.)); +#71006 = ORIENTED_EDGE('',*,*,#71007,.F.); +#71007 = EDGE_CURVE('',#70370,#71000,#71008,.T.); +#71008 = LINE('',#71009,#71010); +#71009 = CARTESIAN_POINT('',(0.6,1.775,6.E-02)); +#71010 = VECTOR('',#71011,1.); +#71011 = DIRECTION('',(0.,0.,1.)); +#71012 = ORIENTED_EDGE('',*,*,#70369,.T.); +#71013 = ORIENTED_EDGE('',*,*,#71014,.T.); +#71014 = EDGE_CURVE('',#70362,#71015,#71017,.T.); +#71015 = VERTEX_POINT('',#71016); +#71016 = CARTESIAN_POINT('',(1.4,1.775,0.2)); +#71017 = LINE('',#71018,#71019); +#71018 = CARTESIAN_POINT('',(1.4,1.775,6.E-02)); +#71019 = VECTOR('',#71020,1.); +#71020 = DIRECTION('',(0.,0.,1.)); +#71021 = ORIENTED_EDGE('',*,*,#71022,.T.); +#71022 = EDGE_CURVE('',#71015,#71023,#71025,.T.); +#71023 = VERTEX_POINT('',#71024); +#71024 = CARTESIAN_POINT('',(1.6,1.775,0.2)); +#71025 = LINE('',#71026,#71027); +#71026 = CARTESIAN_POINT('',(1.4,1.775,0.2)); +#71027 = VECTOR('',#71028,1.); +#71028 = DIRECTION('',(1.,0.,0.)); +#71029 = ORIENTED_EDGE('',*,*,#71030,.F.); +#71030 = EDGE_CURVE('',#70338,#71023,#71031,.T.); +#71031 = LINE('',#71032,#71033); +#71032 = CARTESIAN_POINT('',(1.6,1.775,6.E-02)); +#71033 = VECTOR('',#71034,1.); +#71034 = DIRECTION('',(0.,0.,1.)); +#71035 = ORIENTED_EDGE('',*,*,#70337,.T.); +#71036 = ORIENTED_EDGE('',*,*,#71037,.T.); +#71037 = EDGE_CURVE('',#70328,#71038,#71040,.T.); +#71038 = VERTEX_POINT('',#71039); +#71039 = CARTESIAN_POINT('',(3.,1.775,1.46)); +#71040 = LINE('',#71041,#71042); +#71041 = CARTESIAN_POINT('',(3.,1.775,6.E-02)); +#71042 = VECTOR('',#71043,1.); +#71043 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71044 = ORIENTED_EDGE('',*,*,#71045,.F.); +#71045 = EDGE_CURVE('',#71046,#71038,#71048,.T.); +#71046 = VERTEX_POINT('',#71047); +#71047 = CARTESIAN_POINT('',(2.5,1.775,1.46)); +#71048 = LINE('',#71049,#71050); +#71049 = CARTESIAN_POINT('',(2.5,1.775,1.46)); +#71050 = VECTOR('',#71051,1.); +#71051 = DIRECTION('',(1.,0.,0.)); +#71052 = ORIENTED_EDGE('',*,*,#71053,.F.); +#71053 = EDGE_CURVE('',#70794,#71046,#71054,.T.); +#71054 = LINE('',#71055,#71056); +#71055 = CARTESIAN_POINT('',(2.5,1.775,2.96)); +#71056 = VECTOR('',#71057,1.); +#71057 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71058 = ORIENTED_EDGE('',*,*,#70791,.F.); +#71059 = ORIENTED_EDGE('',*,*,#71060,.T.); +#71060 = EDGE_CURVE('',#70792,#70920,#71061,.T.); +#71061 = LINE('',#71062,#71063); +#71062 = CARTESIAN_POINT('',(-2.5,1.775,2.96)); +#71063 = VECTOR('',#71064,1.); +#71064 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71065 = ORIENTED_EDGE('',*,*,#70919,.F.); +#71066 = PLANE('',#71067); +#71067 = AXIS2_PLACEMENT_3D('',#71068,#71069,#71070); +#71068 = CARTESIAN_POINT('',(-3.,1.775,6.E-02)); +#71069 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71070 = DIRECTION('',(1.,0.,0.)); +#71071 = ADVANCED_FACE('',(#71072),#71138,.T.); +#71072 = FACE_BOUND('',#71073,.T.); +#71073 = EDGE_LOOP('',(#71074,#71075,#71076,#71084,#71092,#71100,#71106, + #71107,#71108,#71116,#71124,#71132)); +#71074 = ORIENTED_EDGE('',*,*,#70327,.F.); +#71075 = ORIENTED_EDGE('',*,*,#71037,.T.); +#71076 = ORIENTED_EDGE('',*,*,#71077,.T.); +#71077 = EDGE_CURVE('',#71038,#71078,#71080,.T.); +#71078 = VERTEX_POINT('',#71079); +#71079 = CARTESIAN_POINT('',(3.,1.225,1.46)); +#71080 = LINE('',#71081,#71082); +#71081 = CARTESIAN_POINT('',(3.,1.775,1.46)); +#71082 = VECTOR('',#71083,1.); +#71083 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71084 = ORIENTED_EDGE('',*,*,#71085,.T.); +#71085 = EDGE_CURVE('',#71078,#71086,#71088,.T.); +#71086 = VERTEX_POINT('',#71087); +#71087 = CARTESIAN_POINT('',(3.,1.225,2.46)); +#71088 = LINE('',#71089,#71090); +#71089 = CARTESIAN_POINT('',(3.,1.225,1.46)); +#71090 = VECTOR('',#71091,1.); +#71091 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71092 = ORIENTED_EDGE('',*,*,#71093,.T.); +#71093 = EDGE_CURVE('',#71086,#71094,#71096,.T.); +#71094 = VERTEX_POINT('',#71095); +#71095 = CARTESIAN_POINT('',(3.,0.575,2.46)); +#71096 = LINE('',#71097,#71098); +#71097 = CARTESIAN_POINT('',(3.,1.225,2.46)); +#71098 = VECTOR('',#71099,1.); +#71099 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71100 = ORIENTED_EDGE('',*,*,#71101,.T.); +#71101 = EDGE_CURVE('',#71094,#70818,#71102,.T.); +#71102 = LINE('',#71103,#71104); +#71103 = CARTESIAN_POINT('',(3.,0.575,2.46)); +#71104 = VECTOR('',#71105,1.); +#71105 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#71106 = ORIENTED_EDGE('',*,*,#70817,.T.); +#71107 = ORIENTED_EDGE('',*,*,#70671,.F.); +#71108 = ORIENTED_EDGE('',*,*,#71109,.T.); +#71109 = EDGE_CURVE('',#70664,#71110,#71112,.T.); +#71110 = VERTEX_POINT('',#71111); +#71111 = CARTESIAN_POINT('',(3.,-1.975,1.26)); +#71112 = LINE('',#71113,#71114); +#71113 = CARTESIAN_POINT('',(3.,-2.475,1.26)); +#71114 = VECTOR('',#71115,1.); +#71115 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71116 = ORIENTED_EDGE('',*,*,#71117,.T.); +#71117 = EDGE_CURVE('',#71110,#71118,#71120,.T.); +#71118 = VERTEX_POINT('',#71119); +#71119 = CARTESIAN_POINT('',(3.,-1.975,0.61)); +#71120 = LINE('',#71121,#71122); +#71121 = CARTESIAN_POINT('',(3.,-1.975,1.26)); +#71122 = VECTOR('',#71123,1.); +#71123 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71124 = ORIENTED_EDGE('',*,*,#71125,.T.); +#71125 = EDGE_CURVE('',#71118,#71126,#71128,.T.); +#71126 = VERTEX_POINT('',#71127); +#71127 = CARTESIAN_POINT('',(3.,-0.975,0.61)); +#71128 = LINE('',#71129,#71130); +#71129 = CARTESIAN_POINT('',(3.,-1.975,0.61)); +#71130 = VECTOR('',#71131,1.); +#71131 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71132 = ORIENTED_EDGE('',*,*,#71133,.T.); +#71133 = EDGE_CURVE('',#71126,#70330,#71134,.T.); +#71134 = LINE('',#71135,#71136); +#71135 = CARTESIAN_POINT('',(3.,-0.975,0.61)); +#71136 = VECTOR('',#71137,1.); +#71137 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71138 = PLANE('',#71139); +#71139 = AXIS2_PLACEMENT_3D('',#71140,#71141,#71142); +#71140 = CARTESIAN_POINT('',(3.,1.775,6.E-02)); +#71141 = DIRECTION('',(1.,0.,0.)); +#71142 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71143 = ADVANCED_FACE('',(#71144),#71162,.F.); +#71144 = FACE_BOUND('',#71145,.F.); +#71145 = EDGE_LOOP('',(#71146,#71154,#71160,#71161)); +#71146 = ORIENTED_EDGE('',*,*,#71147,.F.); +#71147 = EDGE_CURVE('',#71148,#70513,#71150,.T.); +#71148 = VERTEX_POINT('',#71149); +#71149 = CARTESIAN_POINT('',(2.7,-0.975,0.61)); +#71150 = LINE('',#71151,#71152); +#71151 = CARTESIAN_POINT('',(2.7,-0.975,0.61)); +#71152 = VECTOR('',#71153,1.); +#71153 = DIRECTION('',(0.,0.,-1.)); +#71154 = ORIENTED_EDGE('',*,*,#71155,.T.); +#71155 = EDGE_CURVE('',#71148,#71126,#71156,.T.); +#71156 = LINE('',#71157,#71158); +#71157 = CARTESIAN_POINT('',(2.5,-0.975,0.61)); +#71158 = VECTOR('',#71159,1.); +#71159 = DIRECTION('',(1.,0.,0.)); +#71160 = ORIENTED_EDGE('',*,*,#71133,.T.); +#71161 = ORIENTED_EDGE('',*,*,#70520,.F.); +#71162 = PLANE('',#71163); +#71163 = AXIS2_PLACEMENT_3D('',#71164,#71165,#71166); +#71164 = CARTESIAN_POINT('',(2.5,-0.975,0.61)); +#71165 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71166 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71167 = ADVANCED_FACE('',(#71168),#71193,.T.); +#71168 = FACE_BOUND('',#71169,.T.); +#71169 = EDGE_LOOP('',(#71170,#71178,#71179,#71187)); +#71170 = ORIENTED_EDGE('',*,*,#71171,.F.); +#71171 = EDGE_CURVE('',#70505,#71172,#71174,.T.); +#71172 = VERTEX_POINT('',#71173); +#71173 = CARTESIAN_POINT('',(2.5,-0.975,1.E-02)); +#71174 = LINE('',#71175,#71176); +#71175 = CARTESIAN_POINT('',(2.5,-0.975,0.61)); +#71176 = VECTOR('',#71177,1.); +#71177 = DIRECTION('',(0.,0.,-1.)); +#71178 = ORIENTED_EDGE('',*,*,#70512,.T.); +#71179 = ORIENTED_EDGE('',*,*,#71180,.T.); +#71180 = EDGE_CURVE('',#70513,#71181,#71183,.T.); +#71181 = VERTEX_POINT('',#71182); +#71182 = CARTESIAN_POINT('',(2.7,-0.975,1.E-02)); +#71183 = LINE('',#71184,#71185); +#71184 = CARTESIAN_POINT('',(2.7,-0.975,0.61)); +#71185 = VECTOR('',#71186,1.); +#71186 = DIRECTION('',(0.,0.,-1.)); +#71187 = ORIENTED_EDGE('',*,*,#71188,.F.); +#71188 = EDGE_CURVE('',#71172,#71181,#71189,.T.); +#71189 = LINE('',#71190,#71191); +#71190 = CARTESIAN_POINT('',(2.5,-0.975,1.E-02)); +#71191 = VECTOR('',#71192,1.); +#71192 = DIRECTION('',(1.,0.,0.)); +#71193 = PLANE('',#71194); +#71194 = AXIS2_PLACEMENT_3D('',#71195,#71196,#71197); +#71195 = CARTESIAN_POINT('',(2.5,-0.975,0.61)); +#71196 = DIRECTION('',(0.,1.,0.)); +#71197 = DIRECTION('',(0.,0.,-1.)); +#71198 = ADVANCED_FACE('',(#71199),#71217,.T.); +#71199 = FACE_BOUND('',#71200,.T.); +#71200 = EDGE_LOOP('',(#71201,#71209,#71215,#71216)); +#71201 = ORIENTED_EDGE('',*,*,#71202,.T.); +#71202 = EDGE_CURVE('',#71172,#71203,#71205,.T.); +#71203 = VERTEX_POINT('',#71204); +#71204 = CARTESIAN_POINT('',(2.5,-2.475,1.E-02)); +#71205 = LINE('',#71206,#71207); +#71206 = CARTESIAN_POINT('',(2.5,-0.975,1.E-02)); +#71207 = VECTOR('',#71208,1.); +#71208 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#71209 = ORIENTED_EDGE('',*,*,#71210,.T.); +#71210 = EDGE_CURVE('',#71203,#70497,#71211,.T.); +#71211 = LINE('',#71212,#71213); +#71212 = CARTESIAN_POINT('',(2.5,-2.475,1.E-02)); +#71213 = VECTOR('',#71214,1.); +#71214 = DIRECTION('',(0.,0.,1.)); +#71215 = ORIENTED_EDGE('',*,*,#70504,.F.); +#71216 = ORIENTED_EDGE('',*,*,#71171,.T.); +#71217 = PLANE('',#71218); +#71218 = AXIS2_PLACEMENT_3D('',#71219,#71220,#71221); +#71219 = CARTESIAN_POINT('',(2.5,-1.843181818182,0.516818181818)); +#71220 = DIRECTION('',(-1.,-0.,-0.)); +#71221 = DIRECTION('',(0.,0.,-1.)); +#71222 = ADVANCED_FACE('',(#71223),#71248,.F.); +#71223 = FACE_BOUND('',#71224,.F.); +#71224 = EDGE_LOOP('',(#71225,#71235,#71241,#71242)); +#71225 = ORIENTED_EDGE('',*,*,#71226,.T.); +#71226 = EDGE_CURVE('',#71227,#71229,#71231,.T.); +#71227 = VERTEX_POINT('',#71228); +#71228 = CARTESIAN_POINT('',(-2.5,-0.975,1.E-02)); +#71229 = VERTEX_POINT('',#71230); +#71230 = CARTESIAN_POINT('',(-2.5,-2.475,1.E-02)); +#71231 = LINE('',#71232,#71233); +#71232 = CARTESIAN_POINT('',(-2.5,-0.975,1.E-02)); +#71233 = VECTOR('',#71234,1.); +#71234 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#71235 = ORIENTED_EDGE('',*,*,#71236,.T.); +#71236 = EDGE_CURVE('',#71229,#70489,#71237,.T.); +#71237 = LINE('',#71238,#71239); +#71238 = CARTESIAN_POINT('',(-2.5,-2.475,1.E-02)); +#71239 = VECTOR('',#71240,1.); +#71240 = DIRECTION('',(0.,0.,1.)); +#71241 = ORIENTED_EDGE('',*,*,#70488,.F.); +#71242 = ORIENTED_EDGE('',*,*,#71243,.T.); +#71243 = EDGE_CURVE('',#70481,#71227,#71244,.T.); +#71244 = LINE('',#71245,#71246); +#71245 = CARTESIAN_POINT('',(-2.5,-0.975,0.61)); +#71246 = VECTOR('',#71247,1.); +#71247 = DIRECTION('',(0.,0.,-1.)); +#71248 = PLANE('',#71249); +#71249 = AXIS2_PLACEMENT_3D('',#71250,#71251,#71252); +#71250 = CARTESIAN_POINT('',(-2.5,-1.843181818182,0.516818181818)); +#71251 = DIRECTION('',(-1.,-0.,-0.)); +#71252 = DIRECTION('',(0.,0.,-1.)); +#71253 = ADVANCED_FACE('',(#71254),#71272,.T.); +#71254 = FACE_BOUND('',#71255,.T.); +#71255 = EDGE_LOOP('',(#71256,#71264,#71265,#71266)); +#71256 = ORIENTED_EDGE('',*,*,#71257,.F.); +#71257 = EDGE_CURVE('',#70473,#71258,#71260,.T.); +#71258 = VERTEX_POINT('',#71259); +#71259 = CARTESIAN_POINT('',(-2.7,-0.975,1.E-02)); +#71260 = LINE('',#71261,#71262); +#71261 = CARTESIAN_POINT('',(-2.7,-0.975,0.61)); +#71262 = VECTOR('',#71263,1.); +#71263 = DIRECTION('',(0.,0.,-1.)); +#71264 = ORIENTED_EDGE('',*,*,#70480,.T.); +#71265 = ORIENTED_EDGE('',*,*,#71243,.T.); +#71266 = ORIENTED_EDGE('',*,*,#71267,.F.); +#71267 = EDGE_CURVE('',#71258,#71227,#71268,.T.); +#71268 = LINE('',#71269,#71270); +#71269 = CARTESIAN_POINT('',(-2.7,-0.975,1.E-02)); +#71270 = VECTOR('',#71271,1.); +#71271 = DIRECTION('',(1.,0.,0.)); +#71272 = PLANE('',#71273); +#71273 = AXIS2_PLACEMENT_3D('',#71274,#71275,#71276); +#71274 = CARTESIAN_POINT('',(-2.7,-0.975,0.61)); +#71275 = DIRECTION('',(0.,1.,0.)); +#71276 = DIRECTION('',(0.,0.,-1.)); +#71277 = ADVANCED_FACE('',(#71278),#71312,.T.); +#71278 = FACE_BOUND('',#71279,.T.); +#71279 = EDGE_LOOP('',(#71280,#71288,#71289,#71290,#71298,#71306)); +#71280 = ORIENTED_EDGE('',*,*,#71281,.T.); +#71281 = EDGE_CURVE('',#71282,#70450,#71284,.T.); +#71282 = VERTEX_POINT('',#71283); +#71283 = CARTESIAN_POINT('',(-1.6,1.675,0.)); +#71284 = LINE('',#71285,#71286); +#71285 = CARTESIAN_POINT('',(-1.6,1.675,0.)); +#71286 = VECTOR('',#71287,1.); +#71287 = DIRECTION('',(0.,0.,1.)); +#71288 = ORIENTED_EDGE('',*,*,#70457,.T.); +#71289 = ORIENTED_EDGE('',*,*,#70945,.T.); +#71290 = ORIENTED_EDGE('',*,*,#71291,.T.); +#71291 = EDGE_CURVE('',#70946,#71292,#71294,.T.); +#71292 = VERTEX_POINT('',#71293); +#71293 = CARTESIAN_POINT('',(-1.6,2.475,0.2)); +#71294 = LINE('',#71295,#71296); +#71295 = CARTESIAN_POINT('',(-1.6,1.775,0.2)); +#71296 = VECTOR('',#71297,1.); +#71297 = DIRECTION('',(0.,1.,0.)); +#71298 = ORIENTED_EDGE('',*,*,#71299,.T.); +#71299 = EDGE_CURVE('',#71292,#71300,#71302,.T.); +#71300 = VERTEX_POINT('',#71301); +#71301 = CARTESIAN_POINT('',(-1.6,2.475,0.)); +#71302 = LINE('',#71303,#71304); +#71303 = CARTESIAN_POINT('',(-1.6,2.475,0.2)); +#71304 = VECTOR('',#71305,1.); +#71305 = DIRECTION('',(0.,0.,-1.)); +#71306 = ORIENTED_EDGE('',*,*,#71307,.T.); +#71307 = EDGE_CURVE('',#71300,#71282,#71308,.T.); +#71308 = LINE('',#71309,#71310); +#71309 = CARTESIAN_POINT('',(-1.6,2.475,0.)); +#71310 = VECTOR('',#71311,1.); +#71311 = DIRECTION('',(0.,-1.,0.)); +#71312 = PLANE('',#71313); +#71313 = AXIS2_PLACEMENT_3D('',#71314,#71315,#71316); +#71314 = CARTESIAN_POINT('',(-1.6,2.082,9.3E-02)); +#71315 = DIRECTION('',(-1.,-0.,-0.)); +#71316 = DIRECTION('',(0.,0.,-1.)); +#71317 = ADVANCED_FACE('',(#71318),#71336,.T.); +#71318 = FACE_BOUND('',#71319,.T.); +#71319 = EDGE_LOOP('',(#71320,#71328,#71334,#71335)); +#71320 = ORIENTED_EDGE('',*,*,#71321,.T.); +#71321 = EDGE_CURVE('',#71282,#71322,#71324,.T.); +#71322 = VERTEX_POINT('',#71323); +#71323 = CARTESIAN_POINT('',(-1.4,1.675,0.)); +#71324 = LINE('',#71325,#71326); +#71325 = CARTESIAN_POINT('',(-1.6,1.675,0.)); +#71326 = VECTOR('',#71327,1.); +#71327 = DIRECTION('',(1.,0.,0.)); +#71328 = ORIENTED_EDGE('',*,*,#71329,.T.); +#71329 = EDGE_CURVE('',#71322,#70442,#71330,.T.); +#71330 = LINE('',#71331,#71332); +#71331 = CARTESIAN_POINT('',(-1.4,1.675,0.)); +#71332 = VECTOR('',#71333,1.); +#71333 = DIRECTION('',(0.,0.,1.)); +#71334 = ORIENTED_EDGE('',*,*,#70449,.F.); +#71335 = ORIENTED_EDGE('',*,*,#71281,.F.); +#71336 = PLANE('',#71337); +#71337 = AXIS2_PLACEMENT_3D('',#71338,#71339,#71340); +#71338 = CARTESIAN_POINT('',(-1.6,1.675,0.)); +#71339 = DIRECTION('',(0.,-1.,0.)); +#71340 = DIRECTION('',(0.,0.,1.)); +#71341 = ADVANCED_FACE('',(#71342),#71369,.F.); +#71342 = FACE_BOUND('',#71343,.F.); +#71343 = EDGE_LOOP('',(#71344,#71345,#71346,#71347,#71355,#71363)); +#71344 = ORIENTED_EDGE('',*,*,#71329,.T.); +#71345 = ORIENTED_EDGE('',*,*,#70441,.T.); +#71346 = ORIENTED_EDGE('',*,*,#70961,.T.); +#71347 = ORIENTED_EDGE('',*,*,#71348,.T.); +#71348 = EDGE_CURVE('',#70954,#71349,#71351,.T.); +#71349 = VERTEX_POINT('',#71350); +#71350 = CARTESIAN_POINT('',(-1.4,2.475,0.2)); +#71351 = LINE('',#71352,#71353); +#71352 = CARTESIAN_POINT('',(-1.4,1.775,0.2)); +#71353 = VECTOR('',#71354,1.); +#71354 = DIRECTION('',(0.,1.,0.)); +#71355 = ORIENTED_EDGE('',*,*,#71356,.T.); +#71356 = EDGE_CURVE('',#71349,#71357,#71359,.T.); +#71357 = VERTEX_POINT('',#71358); +#71358 = CARTESIAN_POINT('',(-1.4,2.475,0.)); +#71359 = LINE('',#71360,#71361); +#71360 = CARTESIAN_POINT('',(-1.4,2.475,0.2)); +#71361 = VECTOR('',#71362,1.); +#71362 = DIRECTION('',(0.,0.,-1.)); +#71363 = ORIENTED_EDGE('',*,*,#71364,.T.); +#71364 = EDGE_CURVE('',#71357,#71322,#71365,.T.); +#71365 = LINE('',#71366,#71367); +#71366 = CARTESIAN_POINT('',(-1.4,2.475,0.)); +#71367 = VECTOR('',#71368,1.); +#71368 = DIRECTION('',(0.,-1.,0.)); +#71369 = PLANE('',#71370); +#71370 = AXIS2_PLACEMENT_3D('',#71371,#71372,#71373); +#71371 = CARTESIAN_POINT('',(-1.4,2.082,9.3E-02)); +#71372 = DIRECTION('',(-1.,-0.,-0.)); +#71373 = DIRECTION('',(0.,0.,-1.)); +#71374 = ADVANCED_FACE('',(#71375),#71409,.T.); +#71375 = FACE_BOUND('',#71376,.T.); +#71376 = EDGE_LOOP('',(#71377,#71385,#71386,#71387,#71395,#71403)); +#71377 = ORIENTED_EDGE('',*,*,#71378,.T.); +#71378 = EDGE_CURVE('',#71379,#70418,#71381,.T.); +#71379 = VERTEX_POINT('',#71380); +#71380 = CARTESIAN_POINT('',(-0.6,1.675,0.)); +#71381 = LINE('',#71382,#71383); +#71382 = CARTESIAN_POINT('',(-0.6,1.675,0.)); +#71383 = VECTOR('',#71384,1.); +#71384 = DIRECTION('',(0.,0.,1.)); +#71385 = ORIENTED_EDGE('',*,*,#70425,.T.); +#71386 = ORIENTED_EDGE('',*,*,#70968,.T.); +#71387 = ORIENTED_EDGE('',*,*,#71388,.T.); +#71388 = EDGE_CURVE('',#70969,#71389,#71391,.T.); +#71389 = VERTEX_POINT('',#71390); +#71390 = CARTESIAN_POINT('',(-0.6,2.475,0.2)); +#71391 = LINE('',#71392,#71393); +#71392 = CARTESIAN_POINT('',(-0.6,1.775,0.2)); +#71393 = VECTOR('',#71394,1.); +#71394 = DIRECTION('',(0.,1.,0.)); +#71395 = ORIENTED_EDGE('',*,*,#71396,.T.); +#71396 = EDGE_CURVE('',#71389,#71397,#71399,.T.); +#71397 = VERTEX_POINT('',#71398); +#71398 = CARTESIAN_POINT('',(-0.6,2.475,0.)); +#71399 = LINE('',#71400,#71401); +#71400 = CARTESIAN_POINT('',(-0.6,2.475,0.2)); +#71401 = VECTOR('',#71402,1.); +#71402 = DIRECTION('',(0.,0.,-1.)); +#71403 = ORIENTED_EDGE('',*,*,#71404,.T.); +#71404 = EDGE_CURVE('',#71397,#71379,#71405,.T.); +#71405 = LINE('',#71406,#71407); +#71406 = CARTESIAN_POINT('',(-0.6,2.475,0.)); +#71407 = VECTOR('',#71408,1.); +#71408 = DIRECTION('',(0.,-1.,0.)); +#71409 = PLANE('',#71410); +#71410 = AXIS2_PLACEMENT_3D('',#71411,#71412,#71413); +#71411 = CARTESIAN_POINT('',(-0.6,2.082,9.3E-02)); +#71412 = DIRECTION('',(-1.,-0.,-0.)); +#71413 = DIRECTION('',(0.,0.,-1.)); +#71414 = ADVANCED_FACE('',(#71415),#71433,.T.); +#71415 = FACE_BOUND('',#71416,.T.); +#71416 = EDGE_LOOP('',(#71417,#71425,#71431,#71432)); +#71417 = ORIENTED_EDGE('',*,*,#71418,.T.); +#71418 = EDGE_CURVE('',#71379,#71419,#71421,.T.); +#71419 = VERTEX_POINT('',#71420); +#71420 = CARTESIAN_POINT('',(-0.4,1.675,0.)); +#71421 = LINE('',#71422,#71423); +#71422 = CARTESIAN_POINT('',(-0.6,1.675,0.)); +#71423 = VECTOR('',#71424,1.); +#71424 = DIRECTION('',(1.,0.,0.)); +#71425 = ORIENTED_EDGE('',*,*,#71426,.T.); +#71426 = EDGE_CURVE('',#71419,#70410,#71427,.T.); +#71427 = LINE('',#71428,#71429); +#71428 = CARTESIAN_POINT('',(-0.4,1.675,0.)); +#71429 = VECTOR('',#71430,1.); +#71430 = DIRECTION('',(0.,0.,1.)); +#71431 = ORIENTED_EDGE('',*,*,#70417,.F.); +#71432 = ORIENTED_EDGE('',*,*,#71378,.F.); +#71433 = PLANE('',#71434); +#71434 = AXIS2_PLACEMENT_3D('',#71435,#71436,#71437); +#71435 = CARTESIAN_POINT('',(-0.6,1.675,0.)); +#71436 = DIRECTION('',(0.,-1.,0.)); +#71437 = DIRECTION('',(0.,0.,1.)); +#71438 = ADVANCED_FACE('',(#71439),#71466,.F.); +#71439 = FACE_BOUND('',#71440,.F.); +#71440 = EDGE_LOOP('',(#71441,#71442,#71443,#71444,#71452,#71460)); +#71441 = ORIENTED_EDGE('',*,*,#71426,.T.); +#71442 = ORIENTED_EDGE('',*,*,#70409,.T.); +#71443 = ORIENTED_EDGE('',*,*,#70984,.T.); +#71444 = ORIENTED_EDGE('',*,*,#71445,.T.); +#71445 = EDGE_CURVE('',#70977,#71446,#71448,.T.); +#71446 = VERTEX_POINT('',#71447); +#71447 = CARTESIAN_POINT('',(-0.4,2.475,0.2)); +#71448 = LINE('',#71449,#71450); +#71449 = CARTESIAN_POINT('',(-0.4,1.775,0.2)); +#71450 = VECTOR('',#71451,1.); +#71451 = DIRECTION('',(0.,1.,0.)); +#71452 = ORIENTED_EDGE('',*,*,#71453,.T.); +#71453 = EDGE_CURVE('',#71446,#71454,#71456,.T.); +#71454 = VERTEX_POINT('',#71455); +#71455 = CARTESIAN_POINT('',(-0.4,2.475,0.)); +#71456 = LINE('',#71457,#71458); +#71457 = CARTESIAN_POINT('',(-0.4,2.475,0.2)); +#71458 = VECTOR('',#71459,1.); +#71459 = DIRECTION('',(0.,0.,-1.)); +#71460 = ORIENTED_EDGE('',*,*,#71461,.T.); +#71461 = EDGE_CURVE('',#71454,#71419,#71462,.T.); +#71462 = LINE('',#71463,#71464); +#71463 = CARTESIAN_POINT('',(-0.4,2.475,0.)); +#71464 = VECTOR('',#71465,1.); +#71465 = DIRECTION('',(0.,-1.,0.)); +#71466 = PLANE('',#71467); +#71467 = AXIS2_PLACEMENT_3D('',#71468,#71469,#71470); +#71468 = CARTESIAN_POINT('',(-0.4,2.082,9.3E-02)); +#71469 = DIRECTION('',(-1.,-0.,-0.)); +#71470 = DIRECTION('',(0.,0.,-1.)); +#71471 = ADVANCED_FACE('',(#71472),#71506,.T.); +#71472 = FACE_BOUND('',#71473,.T.); +#71473 = EDGE_LOOP('',(#71474,#71482,#71483,#71484,#71492,#71500)); +#71474 = ORIENTED_EDGE('',*,*,#71475,.T.); +#71475 = EDGE_CURVE('',#71476,#70386,#71478,.T.); +#71476 = VERTEX_POINT('',#71477); +#71477 = CARTESIAN_POINT('',(0.4,1.675,0.)); +#71478 = LINE('',#71479,#71480); +#71479 = CARTESIAN_POINT('',(0.4,1.675,0.)); +#71480 = VECTOR('',#71481,1.); +#71481 = DIRECTION('',(0.,0.,1.)); +#71482 = ORIENTED_EDGE('',*,*,#70393,.T.); +#71483 = ORIENTED_EDGE('',*,*,#70991,.T.); +#71484 = ORIENTED_EDGE('',*,*,#71485,.T.); +#71485 = EDGE_CURVE('',#70992,#71486,#71488,.T.); +#71486 = VERTEX_POINT('',#71487); +#71487 = CARTESIAN_POINT('',(0.4,2.475,0.2)); +#71488 = LINE('',#71489,#71490); +#71489 = CARTESIAN_POINT('',(0.4,1.775,0.2)); +#71490 = VECTOR('',#71491,1.); +#71491 = DIRECTION('',(0.,1.,0.)); +#71492 = ORIENTED_EDGE('',*,*,#71493,.T.); +#71493 = EDGE_CURVE('',#71486,#71494,#71496,.T.); +#71494 = VERTEX_POINT('',#71495); +#71495 = CARTESIAN_POINT('',(0.4,2.475,0.)); +#71496 = LINE('',#71497,#71498); +#71497 = CARTESIAN_POINT('',(0.4,2.475,0.2)); +#71498 = VECTOR('',#71499,1.); +#71499 = DIRECTION('',(0.,0.,-1.)); +#71500 = ORIENTED_EDGE('',*,*,#71501,.T.); +#71501 = EDGE_CURVE('',#71494,#71476,#71502,.T.); +#71502 = LINE('',#71503,#71504); +#71503 = CARTESIAN_POINT('',(0.4,2.475,0.)); +#71504 = VECTOR('',#71505,1.); +#71505 = DIRECTION('',(0.,-1.,0.)); +#71506 = PLANE('',#71507); +#71507 = AXIS2_PLACEMENT_3D('',#71508,#71509,#71510); +#71508 = CARTESIAN_POINT('',(0.4,2.082,9.3E-02)); +#71509 = DIRECTION('',(-1.,-0.,-0.)); +#71510 = DIRECTION('',(0.,0.,-1.)); +#71511 = ADVANCED_FACE('',(#71512),#71530,.T.); +#71512 = FACE_BOUND('',#71513,.T.); +#71513 = EDGE_LOOP('',(#71514,#71522,#71528,#71529)); +#71514 = ORIENTED_EDGE('',*,*,#71515,.T.); +#71515 = EDGE_CURVE('',#71476,#71516,#71518,.T.); +#71516 = VERTEX_POINT('',#71517); +#71517 = CARTESIAN_POINT('',(0.6,1.675,0.)); +#71518 = LINE('',#71519,#71520); +#71519 = CARTESIAN_POINT('',(0.4,1.675,0.)); +#71520 = VECTOR('',#71521,1.); +#71521 = DIRECTION('',(1.,0.,0.)); +#71522 = ORIENTED_EDGE('',*,*,#71523,.T.); +#71523 = EDGE_CURVE('',#71516,#70378,#71524,.T.); +#71524 = LINE('',#71525,#71526); +#71525 = CARTESIAN_POINT('',(0.6,1.675,0.)); +#71526 = VECTOR('',#71527,1.); +#71527 = DIRECTION('',(0.,0.,1.)); +#71528 = ORIENTED_EDGE('',*,*,#70385,.F.); +#71529 = ORIENTED_EDGE('',*,*,#71475,.F.); +#71530 = PLANE('',#71531); +#71531 = AXIS2_PLACEMENT_3D('',#71532,#71533,#71534); +#71532 = CARTESIAN_POINT('',(0.4,1.675,0.)); +#71533 = DIRECTION('',(0.,-1.,0.)); +#71534 = DIRECTION('',(0.,0.,1.)); +#71535 = ADVANCED_FACE('',(#71536),#71563,.F.); +#71536 = FACE_BOUND('',#71537,.F.); +#71537 = EDGE_LOOP('',(#71538,#71539,#71540,#71541,#71549,#71557)); +#71538 = ORIENTED_EDGE('',*,*,#71523,.T.); +#71539 = ORIENTED_EDGE('',*,*,#70377,.T.); +#71540 = ORIENTED_EDGE('',*,*,#71007,.T.); +#71541 = ORIENTED_EDGE('',*,*,#71542,.T.); +#71542 = EDGE_CURVE('',#71000,#71543,#71545,.T.); +#71543 = VERTEX_POINT('',#71544); +#71544 = CARTESIAN_POINT('',(0.6,2.475,0.2)); +#71545 = LINE('',#71546,#71547); +#71546 = CARTESIAN_POINT('',(0.6,1.775,0.2)); +#71547 = VECTOR('',#71548,1.); +#71548 = DIRECTION('',(0.,1.,0.)); +#71549 = ORIENTED_EDGE('',*,*,#71550,.T.); +#71550 = EDGE_CURVE('',#71543,#71551,#71553,.T.); +#71551 = VERTEX_POINT('',#71552); +#71552 = CARTESIAN_POINT('',(0.6,2.475,0.)); +#71553 = LINE('',#71554,#71555); +#71554 = CARTESIAN_POINT('',(0.6,2.475,0.2)); +#71555 = VECTOR('',#71556,1.); +#71556 = DIRECTION('',(0.,0.,-1.)); +#71557 = ORIENTED_EDGE('',*,*,#71558,.T.); +#71558 = EDGE_CURVE('',#71551,#71516,#71559,.T.); +#71559 = LINE('',#71560,#71561); +#71560 = CARTESIAN_POINT('',(0.6,2.475,0.)); +#71561 = VECTOR('',#71562,1.); +#71562 = DIRECTION('',(0.,-1.,0.)); +#71563 = PLANE('',#71564); +#71564 = AXIS2_PLACEMENT_3D('',#71565,#71566,#71567); +#71565 = CARTESIAN_POINT('',(0.6,2.082,9.3E-02)); +#71566 = DIRECTION('',(-1.,-0.,-0.)); +#71567 = DIRECTION('',(0.,0.,-1.)); +#71568 = ADVANCED_FACE('',(#71569),#71603,.T.); +#71569 = FACE_BOUND('',#71570,.T.); +#71570 = EDGE_LOOP('',(#71571,#71579,#71580,#71581,#71589,#71597)); +#71571 = ORIENTED_EDGE('',*,*,#71572,.T.); +#71572 = EDGE_CURVE('',#71573,#70354,#71575,.T.); +#71573 = VERTEX_POINT('',#71574); +#71574 = CARTESIAN_POINT('',(1.4,1.675,0.)); +#71575 = LINE('',#71576,#71577); +#71576 = CARTESIAN_POINT('',(1.4,1.675,0.)); +#71577 = VECTOR('',#71578,1.); +#71578 = DIRECTION('',(0.,0.,1.)); +#71579 = ORIENTED_EDGE('',*,*,#70361,.T.); +#71580 = ORIENTED_EDGE('',*,*,#71014,.T.); +#71581 = ORIENTED_EDGE('',*,*,#71582,.T.); +#71582 = EDGE_CURVE('',#71015,#71583,#71585,.T.); +#71583 = VERTEX_POINT('',#71584); +#71584 = CARTESIAN_POINT('',(1.4,2.475,0.2)); +#71585 = LINE('',#71586,#71587); +#71586 = CARTESIAN_POINT('',(1.4,1.775,0.2)); +#71587 = VECTOR('',#71588,1.); +#71588 = DIRECTION('',(0.,1.,0.)); +#71589 = ORIENTED_EDGE('',*,*,#71590,.T.); +#71590 = EDGE_CURVE('',#71583,#71591,#71593,.T.); +#71591 = VERTEX_POINT('',#71592); +#71592 = CARTESIAN_POINT('',(1.4,2.475,0.)); +#71593 = LINE('',#71594,#71595); +#71594 = CARTESIAN_POINT('',(1.4,2.475,0.2)); +#71595 = VECTOR('',#71596,1.); +#71596 = DIRECTION('',(0.,0.,-1.)); +#71597 = ORIENTED_EDGE('',*,*,#71598,.T.); +#71598 = EDGE_CURVE('',#71591,#71573,#71599,.T.); +#71599 = LINE('',#71600,#71601); +#71600 = CARTESIAN_POINT('',(1.4,2.475,0.)); +#71601 = VECTOR('',#71602,1.); +#71602 = DIRECTION('',(0.,-1.,0.)); +#71603 = PLANE('',#71604); +#71604 = AXIS2_PLACEMENT_3D('',#71605,#71606,#71607); +#71605 = CARTESIAN_POINT('',(1.4,2.082,9.3E-02)); +#71606 = DIRECTION('',(-1.,-0.,-0.)); +#71607 = DIRECTION('',(0.,0.,-1.)); +#71608 = ADVANCED_FACE('',(#71609),#71627,.T.); +#71609 = FACE_BOUND('',#71610,.T.); +#71610 = EDGE_LOOP('',(#71611,#71619,#71625,#71626)); +#71611 = ORIENTED_EDGE('',*,*,#71612,.T.); +#71612 = EDGE_CURVE('',#71573,#71613,#71615,.T.); +#71613 = VERTEX_POINT('',#71614); +#71614 = CARTESIAN_POINT('',(1.6,1.675,0.)); +#71615 = LINE('',#71616,#71617); +#71616 = CARTESIAN_POINT('',(1.4,1.675,0.)); +#71617 = VECTOR('',#71618,1.); +#71618 = DIRECTION('',(1.,0.,0.)); +#71619 = ORIENTED_EDGE('',*,*,#71620,.T.); +#71620 = EDGE_CURVE('',#71613,#70346,#71621,.T.); +#71621 = LINE('',#71622,#71623); +#71622 = CARTESIAN_POINT('',(1.6,1.675,0.)); +#71623 = VECTOR('',#71624,1.); +#71624 = DIRECTION('',(0.,0.,1.)); +#71625 = ORIENTED_EDGE('',*,*,#70353,.F.); +#71626 = ORIENTED_EDGE('',*,*,#71572,.F.); +#71627 = PLANE('',#71628); +#71628 = AXIS2_PLACEMENT_3D('',#71629,#71630,#71631); +#71629 = CARTESIAN_POINT('',(1.4,1.675,0.)); +#71630 = DIRECTION('',(0.,-1.,0.)); +#71631 = DIRECTION('',(0.,0.,1.)); +#71632 = ADVANCED_FACE('',(#71633),#71660,.F.); +#71633 = FACE_BOUND('',#71634,.F.); +#71634 = EDGE_LOOP('',(#71635,#71636,#71637,#71638,#71646,#71654)); +#71635 = ORIENTED_EDGE('',*,*,#71620,.T.); +#71636 = ORIENTED_EDGE('',*,*,#70345,.T.); +#71637 = ORIENTED_EDGE('',*,*,#71030,.T.); +#71638 = ORIENTED_EDGE('',*,*,#71639,.T.); +#71639 = EDGE_CURVE('',#71023,#71640,#71642,.T.); +#71640 = VERTEX_POINT('',#71641); +#71641 = CARTESIAN_POINT('',(1.6,2.475,0.2)); +#71642 = LINE('',#71643,#71644); +#71643 = CARTESIAN_POINT('',(1.6,1.775,0.2)); +#71644 = VECTOR('',#71645,1.); +#71645 = DIRECTION('',(0.,1.,0.)); +#71646 = ORIENTED_EDGE('',*,*,#71647,.T.); +#71647 = EDGE_CURVE('',#71640,#71648,#71650,.T.); +#71648 = VERTEX_POINT('',#71649); +#71649 = CARTESIAN_POINT('',(1.6,2.475,0.)); +#71650 = LINE('',#71651,#71652); +#71651 = CARTESIAN_POINT('',(1.6,2.475,0.2)); +#71652 = VECTOR('',#71653,1.); +#71653 = DIRECTION('',(0.,0.,-1.)); +#71654 = ORIENTED_EDGE('',*,*,#71655,.T.); +#71655 = EDGE_CURVE('',#71648,#71613,#71656,.T.); +#71656 = LINE('',#71657,#71658); +#71657 = CARTESIAN_POINT('',(1.6,2.475,0.)); +#71658 = VECTOR('',#71659,1.); +#71659 = DIRECTION('',(0.,-1.,0.)); +#71660 = PLANE('',#71661); +#71661 = AXIS2_PLACEMENT_3D('',#71662,#71663,#71664); +#71662 = CARTESIAN_POINT('',(1.6,2.082,9.3E-02)); +#71663 = DIRECTION('',(-1.,-0.,-0.)); +#71664 = DIRECTION('',(0.,0.,-1.)); +#71665 = ADVANCED_FACE('',(#71666),#71687,.T.); +#71666 = FACE_BOUND('',#71667,.T.); +#71667 = EDGE_LOOP('',(#71668,#71676,#71677,#71678,#71679,#71680,#71681) + ); +#71668 = ORIENTED_EDGE('',*,*,#71669,.T.); +#71669 = EDGE_CURVE('',#71670,#70608,#71672,.T.); +#71670 = VERTEX_POINT('',#71671); +#71671 = CARTESIAN_POINT('',(-2.7,-2.475,1.E-02)); +#71672 = LINE('',#71673,#71674); +#71673 = CARTESIAN_POINT('',(-2.7,-2.475,1.E-02)); +#71674 = VECTOR('',#71675,1.); +#71675 = DIRECTION('',(0.,0.,1.)); +#71676 = ORIENTED_EDGE('',*,*,#70615,.T.); +#71677 = ORIENTED_EDGE('',*,*,#70591,.T.); +#71678 = ORIENTED_EDGE('',*,*,#70567,.T.); +#71679 = ORIENTED_EDGE('',*,*,#70543,.T.); +#71680 = ORIENTED_EDGE('',*,*,#71257,.T.); +#71681 = ORIENTED_EDGE('',*,*,#71682,.T.); +#71682 = EDGE_CURVE('',#71258,#71670,#71683,.T.); +#71683 = LINE('',#71684,#71685); +#71684 = CARTESIAN_POINT('',(-2.7,-0.975,1.E-02)); +#71685 = VECTOR('',#71686,1.); +#71686 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#71687 = PLANE('',#71688); +#71688 = AXIS2_PLACEMENT_3D('',#71689,#71690,#71691); +#71689 = CARTESIAN_POINT('',(-2.7,-1.843181818182,0.516818181818)); +#71690 = DIRECTION('',(-1.,-0.,-0.)); +#71691 = DIRECTION('',(0.,0.,-1.)); +#71692 = ADVANCED_FACE('',(#71693),#71705,.T.); +#71693 = FACE_BOUND('',#71694,.T.); +#71694 = EDGE_LOOP('',(#71695,#71701,#71702,#71703,#71704)); +#71695 = ORIENTED_EDGE('',*,*,#71696,.T.); +#71696 = EDGE_CURVE('',#71670,#71229,#71697,.T.); +#71697 = LINE('',#71698,#71699); +#71698 = CARTESIAN_POINT('',(-2.7,-2.475,1.E-02)); +#71699 = VECTOR('',#71700,1.); +#71700 = DIRECTION('',(1.,0.,0.)); +#71701 = ORIENTED_EDGE('',*,*,#71236,.T.); +#71702 = ORIENTED_EDGE('',*,*,#70640,.T.); +#71703 = ORIENTED_EDGE('',*,*,#70632,.F.); +#71704 = ORIENTED_EDGE('',*,*,#71669,.F.); +#71705 = PLANE('',#71706); +#71706 = AXIS2_PLACEMENT_3D('',#71707,#71708,#71709); +#71707 = CARTESIAN_POINT('',(-2.7,-2.475,1.E-02)); +#71708 = DIRECTION('',(0.,-1.,0.)); +#71709 = DIRECTION('',(0.,0.,1.)); +#71710 = ADVANCED_FACE('',(#71711),#71730,.T.); +#71711 = FACE_BOUND('',#71712,.T.); +#71712 = EDGE_LOOP('',(#71713,#71721,#71727,#71728,#71729)); +#71713 = ORIENTED_EDGE('',*,*,#71714,.T.); +#71714 = EDGE_CURVE('',#71203,#71715,#71717,.T.); +#71715 = VERTEX_POINT('',#71716); +#71716 = CARTESIAN_POINT('',(2.7,-2.475,1.E-02)); +#71717 = LINE('',#71718,#71719); +#71718 = CARTESIAN_POINT('',(2.5,-2.475,1.E-02)); +#71719 = VECTOR('',#71720,1.); +#71720 = DIRECTION('',(1.,0.,0.)); +#71721 = ORIENTED_EDGE('',*,*,#71722,.T.); +#71722 = EDGE_CURVE('',#71715,#70656,#71723,.T.); +#71723 = LINE('',#71724,#71725); +#71724 = CARTESIAN_POINT('',(2.7,-2.475,1.E-02)); +#71725 = VECTOR('',#71726,1.); +#71726 = DIRECTION('',(0.,0.,1.)); +#71727 = ORIENTED_EDGE('',*,*,#70655,.F.); +#71728 = ORIENTED_EDGE('',*,*,#70647,.F.); +#71729 = ORIENTED_EDGE('',*,*,#71210,.F.); +#71730 = PLANE('',#71731); +#71731 = AXIS2_PLACEMENT_3D('',#71732,#71733,#71734); +#71732 = CARTESIAN_POINT('',(2.5,-2.475,1.E-02)); +#71733 = DIRECTION('',(0.,-1.,0.)); +#71734 = DIRECTION('',(0.,0.,1.)); +#71735 = ADVANCED_FACE('',(#71736),#71754,.F.); +#71736 = FACE_BOUND('',#71737,.F.); +#71737 = EDGE_LOOP('',(#71738,#71746,#71747,#71748)); +#71738 = ORIENTED_EDGE('',*,*,#71739,.F.); +#71739 = EDGE_CURVE('',#70656,#71740,#71742,.T.); +#71740 = VERTEX_POINT('',#71741); +#71741 = CARTESIAN_POINT('',(2.7,-1.975,1.26)); +#71742 = LINE('',#71743,#71744); +#71743 = CARTESIAN_POINT('',(2.7,-2.475,1.26)); +#71744 = VECTOR('',#71745,1.); +#71745 = DIRECTION('',(0.,1.,0.)); +#71746 = ORIENTED_EDGE('',*,*,#70663,.T.); +#71747 = ORIENTED_EDGE('',*,*,#71109,.T.); +#71748 = ORIENTED_EDGE('',*,*,#71749,.F.); +#71749 = EDGE_CURVE('',#71740,#71110,#71750,.T.); +#71750 = LINE('',#71751,#71752); +#71751 = CARTESIAN_POINT('',(2.5,-1.975,1.26)); +#71752 = VECTOR('',#71753,1.); +#71753 = DIRECTION('',(1.,0.,0.)); +#71754 = PLANE('',#71755); +#71755 = AXIS2_PLACEMENT_3D('',#71756,#71757,#71758); +#71756 = CARTESIAN_POINT('',(2.5,-2.475,1.26)); +#71757 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71758 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71759 = ADVANCED_FACE('',(#71760),#71808,.F.); +#71760 = FACE_BOUND('',#71761,.F.); +#71761 = EDGE_LOOP('',(#71762,#71763,#71771,#71779,#71785,#71786,#71794, + #71802)); +#71762 = ORIENTED_EDGE('',*,*,#70687,.F.); +#71763 = ORIENTED_EDGE('',*,*,#71764,.T.); +#71764 = EDGE_CURVE('',#70688,#71765,#71767,.T.); +#71765 = VERTEX_POINT('',#71766); +#71766 = CARTESIAN_POINT('',(2.2,0.525,0.46)); +#71767 = LINE('',#71768,#71769); +#71768 = CARTESIAN_POINT('',(2.2,-2.475,0.46)); +#71769 = VECTOR('',#71770,1.); +#71770 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71771 = ORIENTED_EDGE('',*,*,#71772,.T.); +#71772 = EDGE_CURVE('',#71765,#71773,#71775,.T.); +#71773 = VERTEX_POINT('',#71774); +#71774 = CARTESIAN_POINT('',(2.2,0.525,2.56)); +#71775 = LINE('',#71776,#71777); +#71776 = CARTESIAN_POINT('',(2.2,0.525,0.46)); +#71777 = VECTOR('',#71778,1.); +#71778 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71779 = ORIENTED_EDGE('',*,*,#71780,.F.); +#71780 = EDGE_CURVE('',#70746,#71773,#71781,.T.); +#71781 = LINE('',#71782,#71783); +#71782 = CARTESIAN_POINT('',(2.2,-2.475,2.56)); +#71783 = VECTOR('',#71784,1.); +#71784 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71785 = ORIENTED_EDGE('',*,*,#70753,.F.); +#71786 = ORIENTED_EDGE('',*,*,#71787,.F.); +#71787 = EDGE_CURVE('',#71788,#70754,#71790,.T.); +#71788 = VERTEX_POINT('',#71789); +#71789 = CARTESIAN_POINT('',(2.2,-7.5E-02,2.06)); +#71790 = LINE('',#71791,#71792); +#71791 = CARTESIAN_POINT('',(2.2,-2.475,2.06)); +#71792 = VECTOR('',#71793,1.); +#71793 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71794 = ORIENTED_EDGE('',*,*,#71795,.T.); +#71795 = EDGE_CURVE('',#71788,#71796,#71798,.T.); +#71796 = VERTEX_POINT('',#71797); +#71797 = CARTESIAN_POINT('',(2.2,-7.5E-02,1.46)); +#71798 = LINE('',#71799,#71800); +#71799 = CARTESIAN_POINT('',(2.2,-7.5E-02,1.11)); +#71800 = VECTOR('',#71801,1.); +#71801 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71802 = ORIENTED_EDGE('',*,*,#71803,.F.); +#71803 = EDGE_CURVE('',#70690,#71796,#71804,.T.); +#71804 = LINE('',#71805,#71806); +#71805 = CARTESIAN_POINT('',(2.2,-2.475,1.46)); +#71806 = VECTOR('',#71807,1.); +#71807 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71808 = PLANE('',#71809); +#71809 = AXIS2_PLACEMENT_3D('',#71810,#71811,#71812); +#71810 = CARTESIAN_POINT('',(2.2,-2.475,0.46)); +#71811 = DIRECTION('',(1.,0.,0.)); +#71812 = DIRECTION('',(-0.,1.110223024625E-16,1.)); +#71813 = ADVANCED_FACE('',(#71814),#71832,.F.); +#71814 = FACE_BOUND('',#71815,.F.); +#71815 = EDGE_LOOP('',(#71816,#71817,#71818,#71826)); +#71816 = ORIENTED_EDGE('',*,*,#70777,.F.); +#71817 = ORIENTED_EDGE('',*,*,#71803,.T.); +#71818 = ORIENTED_EDGE('',*,*,#71819,.T.); +#71819 = EDGE_CURVE('',#71796,#71820,#71822,.T.); +#71820 = VERTEX_POINT('',#71821); +#71821 = CARTESIAN_POINT('',(2.55,-7.5E-02,1.46)); +#71822 = LINE('',#71823,#71824); +#71823 = CARTESIAN_POINT('',(-2.55,-7.5E-02,1.46)); +#71824 = VECTOR('',#71825,1.); +#71825 = DIRECTION('',(1.,0.,0.)); +#71826 = ORIENTED_EDGE('',*,*,#71827,.F.); +#71827 = EDGE_CURVE('',#70770,#71820,#71828,.T.); +#71828 = LINE('',#71829,#71830); +#71829 = CARTESIAN_POINT('',(2.55,-2.475,1.46)); +#71830 = VECTOR('',#71831,1.); +#71831 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71832 = PLANE('',#71833); +#71833 = AXIS2_PLACEMENT_3D('',#71834,#71835,#71836); +#71834 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#71835 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71836 = DIRECTION('',(1.,0.,0.)); +#71837 = ADVANCED_FACE('',(#71838),#71856,.F.); +#71838 = FACE_BOUND('',#71839,.F.); +#71839 = EDGE_LOOP('',(#71840,#71841,#71849,#71855)); +#71840 = ORIENTED_EDGE('',*,*,#71827,.T.); +#71841 = ORIENTED_EDGE('',*,*,#71842,.T.); +#71842 = EDGE_CURVE('',#71820,#71843,#71845,.T.); +#71843 = VERTEX_POINT('',#71844); +#71844 = CARTESIAN_POINT('',(2.55,-7.5E-02,2.06)); +#71845 = LINE('',#71846,#71847); +#71846 = CARTESIAN_POINT('',(2.55,-7.5E-02,1.46)); +#71847 = VECTOR('',#71848,1.); +#71848 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71849 = ORIENTED_EDGE('',*,*,#71850,.F.); +#71850 = EDGE_CURVE('',#70762,#71843,#71851,.T.); +#71851 = LINE('',#71852,#71853); +#71852 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#71853 = VECTOR('',#71854,1.); +#71854 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71855 = ORIENTED_EDGE('',*,*,#70769,.F.); +#71856 = PLANE('',#71857); +#71857 = AXIS2_PLACEMENT_3D('',#71858,#71859,#71860); +#71858 = CARTESIAN_POINT('',(2.55,-2.475,1.46)); +#71859 = DIRECTION('',(1.,0.,0.)); +#71860 = DIRECTION('',(-0.,1.110223024625E-16,1.)); +#71861 = ADVANCED_FACE('',(#71862),#71873,.F.); +#71862 = FACE_BOUND('',#71863,.F.); +#71863 = EDGE_LOOP('',(#71864,#71865,#71866,#71872)); +#71864 = ORIENTED_EDGE('',*,*,#70761,.F.); +#71865 = ORIENTED_EDGE('',*,*,#71850,.T.); +#71866 = ORIENTED_EDGE('',*,*,#71867,.T.); +#71867 = EDGE_CURVE('',#71843,#71788,#71868,.T.); +#71868 = LINE('',#71869,#71870); +#71869 = CARTESIAN_POINT('',(2.55,-7.5E-02,2.06)); +#71870 = VECTOR('',#71871,1.); +#71871 = DIRECTION('',(-1.,0.,0.)); +#71872 = ORIENTED_EDGE('',*,*,#71787,.T.); +#71873 = PLANE('',#71874); +#71874 = AXIS2_PLACEMENT_3D('',#71875,#71876,#71877); +#71875 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#71876 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71877 = DIRECTION('',(-1.,0.,0.)); +#71878 = ADVANCED_FACE('',(#71879),#71897,.F.); +#71879 = FACE_BOUND('',#71880,.F.); +#71880 = EDGE_LOOP('',(#71881,#71882,#71890,#71896)); +#71881 = ORIENTED_EDGE('',*,*,#71780,.T.); +#71882 = ORIENTED_EDGE('',*,*,#71883,.T.); +#71883 = EDGE_CURVE('',#71773,#71884,#71886,.T.); +#71884 = VERTEX_POINT('',#71885); +#71885 = CARTESIAN_POINT('',(-2.2,0.525,2.56)); +#71886 = LINE('',#71887,#71888); +#71887 = CARTESIAN_POINT('',(2.2,0.525,2.56)); +#71888 = VECTOR('',#71889,1.); +#71889 = DIRECTION('',(-1.,0.,0.)); +#71890 = ORIENTED_EDGE('',*,*,#71891,.F.); +#71891 = EDGE_CURVE('',#70738,#71884,#71892,.T.); +#71892 = LINE('',#71893,#71894); +#71893 = CARTESIAN_POINT('',(-2.2,-2.475,2.56)); +#71894 = VECTOR('',#71895,1.); +#71895 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71896 = ORIENTED_EDGE('',*,*,#70745,.F.); +#71897 = PLANE('',#71898); +#71898 = AXIS2_PLACEMENT_3D('',#71899,#71900,#71901); +#71899 = CARTESIAN_POINT('',(2.2,-2.475,2.56)); +#71900 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71901 = DIRECTION('',(-1.,0.,0.)); +#71902 = ADVANCED_FACE('',(#71903),#71944,.F.); +#71903 = FACE_BOUND('',#71904,.F.); +#71904 = EDGE_LOOP('',(#71905,#71906,#71907,#71915,#71921,#71922,#71930, + #71938)); +#71905 = ORIENTED_EDGE('',*,*,#70737,.F.); +#71906 = ORIENTED_EDGE('',*,*,#71891,.T.); +#71907 = ORIENTED_EDGE('',*,*,#71908,.T.); +#71908 = EDGE_CURVE('',#71884,#71909,#71911,.T.); +#71909 = VERTEX_POINT('',#71910); +#71910 = CARTESIAN_POINT('',(-2.2,0.525,0.46)); +#71911 = LINE('',#71912,#71913); +#71912 = CARTESIAN_POINT('',(-2.2,0.525,2.56)); +#71913 = VECTOR('',#71914,1.); +#71914 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71915 = ORIENTED_EDGE('',*,*,#71916,.F.); +#71916 = EDGE_CURVE('',#70698,#71909,#71917,.T.); +#71917 = LINE('',#71918,#71919); +#71918 = CARTESIAN_POINT('',(-2.2,-2.475,0.46)); +#71919 = VECTOR('',#71920,1.); +#71920 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71921 = ORIENTED_EDGE('',*,*,#70705,.F.); +#71922 = ORIENTED_EDGE('',*,*,#71923,.F.); +#71923 = EDGE_CURVE('',#71924,#70706,#71926,.T.); +#71924 = VERTEX_POINT('',#71925); +#71925 = CARTESIAN_POINT('',(-2.2,-7.5E-02,1.46)); +#71926 = LINE('',#71927,#71928); +#71927 = CARTESIAN_POINT('',(-2.2,-2.475,1.46)); +#71928 = VECTOR('',#71929,1.); +#71929 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#71930 = ORIENTED_EDGE('',*,*,#71931,.T.); +#71931 = EDGE_CURVE('',#71924,#71932,#71934,.T.); +#71932 = VERTEX_POINT('',#71933); +#71933 = CARTESIAN_POINT('',(-2.2,-7.5E-02,2.06)); +#71934 = LINE('',#71935,#71936); +#71935 = CARTESIAN_POINT('',(-2.2,-7.5E-02,2.16)); +#71936 = VECTOR('',#71937,1.); +#71937 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71938 = ORIENTED_EDGE('',*,*,#71939,.F.); +#71939 = EDGE_CURVE('',#70730,#71932,#71940,.T.); +#71940 = LINE('',#71941,#71942); +#71941 = CARTESIAN_POINT('',(-2.2,-2.475,2.06)); +#71942 = VECTOR('',#71943,1.); +#71943 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71944 = PLANE('',#71945); +#71945 = AXIS2_PLACEMENT_3D('',#71946,#71947,#71948); +#71946 = CARTESIAN_POINT('',(-2.2,-2.475,2.56)); +#71947 = DIRECTION('',(-1.,0.,0.)); +#71948 = DIRECTION('',(-0.,-1.110223024625E-16,-1.)); +#71949 = ADVANCED_FACE('',(#71950),#71968,.F.); +#71950 = FACE_BOUND('',#71951,.F.); +#71951 = EDGE_LOOP('',(#71952,#71953,#71954,#71962)); +#71952 = ORIENTED_EDGE('',*,*,#70729,.F.); +#71953 = ORIENTED_EDGE('',*,*,#71939,.T.); +#71954 = ORIENTED_EDGE('',*,*,#71955,.T.); +#71955 = EDGE_CURVE('',#71932,#71956,#71958,.T.); +#71956 = VERTEX_POINT('',#71957); +#71957 = CARTESIAN_POINT('',(-2.55,-7.5E-02,2.06)); +#71958 = LINE('',#71959,#71960); +#71959 = CARTESIAN_POINT('',(2.55,-7.5E-02,2.06)); +#71960 = VECTOR('',#71961,1.); +#71961 = DIRECTION('',(-1.,0.,0.)); +#71962 = ORIENTED_EDGE('',*,*,#71963,.F.); +#71963 = EDGE_CURVE('',#70722,#71956,#71964,.T.); +#71964 = LINE('',#71965,#71966); +#71965 = CARTESIAN_POINT('',(-2.55,-2.475,2.06)); +#71966 = VECTOR('',#71967,1.); +#71967 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71968 = PLANE('',#71969); +#71969 = AXIS2_PLACEMENT_3D('',#71970,#71971,#71972); +#71970 = CARTESIAN_POINT('',(2.55,-2.475,2.06)); +#71971 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#71972 = DIRECTION('',(-1.,0.,0.)); +#71973 = ADVANCED_FACE('',(#71974),#71992,.F.); +#71974 = FACE_BOUND('',#71975,.F.); +#71975 = EDGE_LOOP('',(#71976,#71977,#71985,#71991)); +#71976 = ORIENTED_EDGE('',*,*,#71963,.T.); +#71977 = ORIENTED_EDGE('',*,*,#71978,.T.); +#71978 = EDGE_CURVE('',#71956,#71979,#71981,.T.); +#71979 = VERTEX_POINT('',#71980); +#71980 = CARTESIAN_POINT('',(-2.55,-7.5E-02,1.46)); +#71981 = LINE('',#71982,#71983); +#71982 = CARTESIAN_POINT('',(-2.55,-7.5E-02,2.06)); +#71983 = VECTOR('',#71984,1.); +#71984 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#71985 = ORIENTED_EDGE('',*,*,#71986,.F.); +#71986 = EDGE_CURVE('',#70714,#71979,#71987,.T.); +#71987 = LINE('',#71988,#71989); +#71988 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#71989 = VECTOR('',#71990,1.); +#71990 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#71991 = ORIENTED_EDGE('',*,*,#70721,.F.); +#71992 = PLANE('',#71993); +#71993 = AXIS2_PLACEMENT_3D('',#71994,#71995,#71996); +#71994 = CARTESIAN_POINT('',(-2.55,-2.475,2.06)); +#71995 = DIRECTION('',(-1.,0.,0.)); +#71996 = DIRECTION('',(-0.,-1.110223024625E-16,-1.)); +#71997 = ADVANCED_FACE('',(#71998),#72009,.F.); +#71998 = FACE_BOUND('',#71999,.F.); +#71999 = EDGE_LOOP('',(#72000,#72001,#72002,#72008)); +#72000 = ORIENTED_EDGE('',*,*,#70713,.F.); +#72001 = ORIENTED_EDGE('',*,*,#71986,.T.); +#72002 = ORIENTED_EDGE('',*,*,#72003,.T.); +#72003 = EDGE_CURVE('',#71979,#71924,#72004,.T.); +#72004 = LINE('',#72005,#72006); +#72005 = CARTESIAN_POINT('',(-2.55,-7.5E-02,1.46)); +#72006 = VECTOR('',#72007,1.); +#72007 = DIRECTION('',(1.,0.,0.)); +#72008 = ORIENTED_EDGE('',*,*,#71923,.T.); +#72009 = PLANE('',#72010); +#72010 = AXIS2_PLACEMENT_3D('',#72011,#72012,#72013); +#72011 = CARTESIAN_POINT('',(-2.55,-2.475,1.46)); +#72012 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#72013 = DIRECTION('',(1.,0.,0.)); +#72014 = ADVANCED_FACE('',(#72015),#72026,.F.); +#72015 = FACE_BOUND('',#72016,.F.); +#72016 = EDGE_LOOP('',(#72017,#72018,#72024,#72025)); +#72017 = ORIENTED_EDGE('',*,*,#71916,.T.); +#72018 = ORIENTED_EDGE('',*,*,#72019,.T.); +#72019 = EDGE_CURVE('',#71909,#71765,#72020,.T.); +#72020 = LINE('',#72021,#72022); +#72021 = CARTESIAN_POINT('',(-2.2,0.525,0.46)); +#72022 = VECTOR('',#72023,1.); +#72023 = DIRECTION('',(1.,0.,0.)); +#72024 = ORIENTED_EDGE('',*,*,#71764,.F.); +#72025 = ORIENTED_EDGE('',*,*,#70697,.F.); +#72026 = PLANE('',#72027); +#72027 = AXIS2_PLACEMENT_3D('',#72028,#72029,#72030); +#72028 = CARTESIAN_POINT('',(-2.2,-2.475,0.46)); +#72029 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#72030 = DIRECTION('',(1.,0.,0.)); +#72031 = ADVANCED_FACE('',(#72032),#72066,.F.); +#72032 = FACE_BOUND('',#72033,.F.); +#72033 = EDGE_LOOP('',(#72034,#72035,#72043,#72051,#72059,#72065)); +#72034 = ORIENTED_EDGE('',*,*,#71053,.T.); +#72035 = ORIENTED_EDGE('',*,*,#72036,.T.); +#72036 = EDGE_CURVE('',#71046,#72037,#72039,.T.); +#72037 = VERTEX_POINT('',#72038); +#72038 = CARTESIAN_POINT('',(2.5,1.225,1.46)); +#72039 = LINE('',#72040,#72041); +#72040 = CARTESIAN_POINT('',(2.5,1.775,1.46)); +#72041 = VECTOR('',#72042,1.); +#72042 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72043 = ORIENTED_EDGE('',*,*,#72044,.T.); +#72044 = EDGE_CURVE('',#72037,#72045,#72047,.T.); +#72045 = VERTEX_POINT('',#72046); +#72046 = CARTESIAN_POINT('',(2.5,1.225,2.46)); +#72047 = LINE('',#72048,#72049); +#72048 = CARTESIAN_POINT('',(2.5,1.225,1.46)); +#72049 = VECTOR('',#72050,1.); +#72050 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#72051 = ORIENTED_EDGE('',*,*,#72052,.T.); +#72052 = EDGE_CURVE('',#72045,#72053,#72055,.T.); +#72053 = VERTEX_POINT('',#72054); +#72054 = CARTESIAN_POINT('',(2.5,0.575,2.46)); +#72055 = LINE('',#72056,#72057); +#72056 = CARTESIAN_POINT('',(2.5,1.225,2.46)); +#72057 = VECTOR('',#72058,1.); +#72058 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72059 = ORIENTED_EDGE('',*,*,#72060,.T.); +#72060 = EDGE_CURVE('',#72053,#70826,#72061,.T.); +#72061 = LINE('',#72062,#72063); +#72062 = CARTESIAN_POINT('',(2.5,0.575,2.46)); +#72063 = VECTOR('',#72064,1.); +#72064 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#72065 = ORIENTED_EDGE('',*,*,#70833,.T.); +#72066 = PLANE('',#72067); +#72067 = AXIS2_PLACEMENT_3D('',#72068,#72069,#72070); +#72068 = CARTESIAN_POINT('',(2.5,1.22787099059,2.3670284193)); +#72069 = DIRECTION('',(-1.,0.,0.)); +#72070 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#72071 = ADVANCED_FACE('',(#72072),#72083,.F.); +#72072 = FACE_BOUND('',#72073,.F.); +#72073 = EDGE_LOOP('',(#72074,#72080,#72081,#72082)); +#72074 = ORIENTED_EDGE('',*,*,#72075,.T.); +#72075 = EDGE_CURVE('',#72053,#71094,#72076,.T.); +#72076 = LINE('',#72077,#72078); +#72077 = CARTESIAN_POINT('',(2.5,0.575,2.46)); +#72078 = VECTOR('',#72079,1.); +#72079 = DIRECTION('',(1.,0.,0.)); +#72080 = ORIENTED_EDGE('',*,*,#71101,.T.); +#72081 = ORIENTED_EDGE('',*,*,#70825,.F.); +#72082 = ORIENTED_EDGE('',*,*,#72060,.F.); +#72083 = PLANE('',#72084); +#72084 = AXIS2_PLACEMENT_3D('',#72085,#72086,#72087); +#72085 = CARTESIAN_POINT('',(2.5,0.575,2.46)); +#72086 = DIRECTION('',(0.,-0.865781720524,-0.500421834463)); +#72087 = DIRECTION('',(0.,-0.500421834463,0.865781720524)); +#72088 = ADVANCED_FACE('',(#72089),#72097,.T.); +#72089 = FACE_BOUND('',#72090,.T.); +#72090 = EDGE_LOOP('',(#72091,#72092,#72093,#72094,#72095,#72096)); +#72091 = ORIENTED_EDGE('',*,*,#71060,.T.); +#72092 = ORIENTED_EDGE('',*,*,#70927,.T.); +#72093 = ORIENTED_EDGE('',*,*,#70903,.T.); +#72094 = ORIENTED_EDGE('',*,*,#70879,.T.); +#72095 = ORIENTED_EDGE('',*,*,#70855,.T.); +#72096 = ORIENTED_EDGE('',*,*,#70801,.T.); +#72097 = PLANE('',#72098); +#72098 = AXIS2_PLACEMENT_3D('',#72099,#72100,#72101); +#72099 = CARTESIAN_POINT('',(-2.5,1.22787099059,2.3670284193)); +#72100 = DIRECTION('',(-1.,0.,0.)); +#72101 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#72102 = ADVANCED_FACE('',(#72103),#72114,.F.); +#72103 = FACE_BOUND('',#72104,.F.); +#72104 = EDGE_LOOP('',(#72105,#72106,#72107,#72113)); +#72105 = ORIENTED_EDGE('',*,*,#71045,.T.); +#72106 = ORIENTED_EDGE('',*,*,#71077,.T.); +#72107 = ORIENTED_EDGE('',*,*,#72108,.F.); +#72108 = EDGE_CURVE('',#72037,#71078,#72109,.T.); +#72109 = LINE('',#72110,#72111); +#72110 = CARTESIAN_POINT('',(2.5,1.225,1.46)); +#72111 = VECTOR('',#72112,1.); +#72112 = DIRECTION('',(1.,0.,0.)); +#72113 = ORIENTED_EDGE('',*,*,#72036,.F.); +#72114 = PLANE('',#72115); +#72115 = AXIS2_PLACEMENT_3D('',#72116,#72117,#72118); +#72116 = CARTESIAN_POINT('',(2.5,1.775,1.46)); +#72117 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#72118 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72119 = ADVANCED_FACE('',(#72120),#72131,.T.); +#72120 = FACE_BOUND('',#72121,.T.); +#72121 = EDGE_LOOP('',(#72122,#72123,#72124,#72130)); +#72122 = ORIENTED_EDGE('',*,*,#71022,.T.); +#72123 = ORIENTED_EDGE('',*,*,#71639,.T.); +#72124 = ORIENTED_EDGE('',*,*,#72125,.F.); +#72125 = EDGE_CURVE('',#71583,#71640,#72126,.T.); +#72126 = LINE('',#72127,#72128); +#72127 = CARTESIAN_POINT('',(1.4,2.475,0.2)); +#72128 = VECTOR('',#72129,1.); +#72129 = DIRECTION('',(1.,0.,0.)); +#72130 = ORIENTED_EDGE('',*,*,#71582,.F.); +#72131 = PLANE('',#72132); +#72132 = AXIS2_PLACEMENT_3D('',#72133,#72134,#72135); +#72133 = CARTESIAN_POINT('',(1.4,1.775,0.2)); +#72134 = DIRECTION('',(0.,0.,1.)); +#72135 = DIRECTION('',(0.,1.,0.)); +#72136 = ADVANCED_FACE('',(#72137),#72148,.T.); +#72137 = FACE_BOUND('',#72138,.T.); +#72138 = EDGE_LOOP('',(#72139,#72140,#72141,#72147)); +#72139 = ORIENTED_EDGE('',*,*,#70999,.T.); +#72140 = ORIENTED_EDGE('',*,*,#71542,.T.); +#72141 = ORIENTED_EDGE('',*,*,#72142,.F.); +#72142 = EDGE_CURVE('',#71486,#71543,#72143,.T.); +#72143 = LINE('',#72144,#72145); +#72144 = CARTESIAN_POINT('',(0.4,2.475,0.2)); +#72145 = VECTOR('',#72146,1.); +#72146 = DIRECTION('',(1.,0.,0.)); +#72147 = ORIENTED_EDGE('',*,*,#71485,.F.); +#72148 = PLANE('',#72149); +#72149 = AXIS2_PLACEMENT_3D('',#72150,#72151,#72152); +#72150 = CARTESIAN_POINT('',(0.4,1.775,0.2)); +#72151 = DIRECTION('',(0.,0.,1.)); +#72152 = DIRECTION('',(0.,1.,0.)); +#72153 = ADVANCED_FACE('',(#72154),#72165,.T.); +#72154 = FACE_BOUND('',#72155,.T.); +#72155 = EDGE_LOOP('',(#72156,#72157,#72158,#72164)); +#72156 = ORIENTED_EDGE('',*,*,#70976,.T.); +#72157 = ORIENTED_EDGE('',*,*,#71445,.T.); +#72158 = ORIENTED_EDGE('',*,*,#72159,.F.); +#72159 = EDGE_CURVE('',#71389,#71446,#72160,.T.); +#72160 = LINE('',#72161,#72162); +#72161 = CARTESIAN_POINT('',(-0.6,2.475,0.2)); +#72162 = VECTOR('',#72163,1.); +#72163 = DIRECTION('',(1.,0.,0.)); +#72164 = ORIENTED_EDGE('',*,*,#71388,.F.); +#72165 = PLANE('',#72166); +#72166 = AXIS2_PLACEMENT_3D('',#72167,#72168,#72169); +#72167 = CARTESIAN_POINT('',(-0.6,1.775,0.2)); +#72168 = DIRECTION('',(0.,0.,1.)); +#72169 = DIRECTION('',(0.,1.,0.)); +#72170 = ADVANCED_FACE('',(#72171),#72182,.T.); +#72171 = FACE_BOUND('',#72172,.T.); +#72172 = EDGE_LOOP('',(#72173,#72174,#72175,#72181)); +#72173 = ORIENTED_EDGE('',*,*,#70953,.T.); +#72174 = ORIENTED_EDGE('',*,*,#71348,.T.); +#72175 = ORIENTED_EDGE('',*,*,#72176,.F.); +#72176 = EDGE_CURVE('',#71292,#71349,#72177,.T.); +#72177 = LINE('',#72178,#72179); +#72178 = CARTESIAN_POINT('',(-1.6,2.475,0.2)); +#72179 = VECTOR('',#72180,1.); +#72180 = DIRECTION('',(1.,0.,0.)); +#72181 = ORIENTED_EDGE('',*,*,#71291,.F.); +#72182 = PLANE('',#72183); +#72183 = AXIS2_PLACEMENT_3D('',#72184,#72185,#72186); +#72184 = CARTESIAN_POINT('',(-1.6,1.775,0.2)); +#72185 = DIRECTION('',(0.,0.,1.)); +#72186 = DIRECTION('',(0.,1.,0.)); +#72187 = ADVANCED_FACE('',(#72188),#72206,.F.); +#72188 = FACE_BOUND('',#72189,.F.); +#72189 = EDGE_LOOP('',(#72190,#72198,#72204,#72205)); +#72190 = ORIENTED_EDGE('',*,*,#72191,.F.); +#72191 = EDGE_CURVE('',#72192,#71148,#72194,.T.); +#72192 = VERTEX_POINT('',#72193); +#72193 = CARTESIAN_POINT('',(2.7,-1.975,0.61)); +#72194 = LINE('',#72195,#72196); +#72195 = CARTESIAN_POINT('',(2.7,-1.975,0.61)); +#72196 = VECTOR('',#72197,1.); +#72197 = DIRECTION('',(0.,1.,0.)); +#72198 = ORIENTED_EDGE('',*,*,#72199,.T.); +#72199 = EDGE_CURVE('',#72192,#71118,#72200,.T.); +#72200 = LINE('',#72201,#72202); +#72201 = CARTESIAN_POINT('',(2.5,-1.975,0.61)); +#72202 = VECTOR('',#72203,1.); +#72203 = DIRECTION('',(1.,0.,0.)); +#72204 = ORIENTED_EDGE('',*,*,#71125,.T.); +#72205 = ORIENTED_EDGE('',*,*,#71155,.F.); +#72206 = PLANE('',#72207); +#72207 = AXIS2_PLACEMENT_3D('',#72208,#72209,#72210); +#72208 = CARTESIAN_POINT('',(2.5,-1.975,0.61)); +#72209 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#72210 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#72211 = ADVANCED_FACE('',(#72212),#72223,.F.); +#72212 = FACE_BOUND('',#72213,.F.); +#72213 = EDGE_LOOP('',(#72214,#72220,#72221,#72222)); +#72214 = ORIENTED_EDGE('',*,*,#72215,.F.); +#72215 = EDGE_CURVE('',#71740,#72192,#72216,.T.); +#72216 = LINE('',#72217,#72218); +#72217 = CARTESIAN_POINT('',(2.7,-1.975,1.26)); +#72218 = VECTOR('',#72219,1.); +#72219 = DIRECTION('',(0.,0.,-1.)); +#72220 = ORIENTED_EDGE('',*,*,#71749,.T.); +#72221 = ORIENTED_EDGE('',*,*,#71117,.T.); +#72222 = ORIENTED_EDGE('',*,*,#72199,.F.); +#72223 = PLANE('',#72224); +#72224 = AXIS2_PLACEMENT_3D('',#72225,#72226,#72227); +#72225 = CARTESIAN_POINT('',(2.5,-1.975,1.26)); +#72226 = DIRECTION('',(0.,1.,-1.110223024625E-16)); +#72227 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#72228 = ADVANCED_FACE('',(#72229),#72240,.F.); +#72229 = FACE_BOUND('',#72230,.F.); +#72230 = EDGE_LOOP('',(#72231,#72237,#72238,#72239)); +#72231 = ORIENTED_EDGE('',*,*,#72232,.T.); +#72232 = EDGE_CURVE('',#72045,#71086,#72233,.T.); +#72233 = LINE('',#72234,#72235); +#72234 = CARTESIAN_POINT('',(2.5,1.225,2.46)); +#72235 = VECTOR('',#72236,1.); +#72236 = DIRECTION('',(1.,0.,0.)); +#72237 = ORIENTED_EDGE('',*,*,#71093,.T.); +#72238 = ORIENTED_EDGE('',*,*,#72075,.F.); +#72239 = ORIENTED_EDGE('',*,*,#72052,.F.); +#72240 = PLANE('',#72241); +#72241 = AXIS2_PLACEMENT_3D('',#72242,#72243,#72244); +#72242 = CARTESIAN_POINT('',(2.5,1.225,2.46)); +#72243 = DIRECTION('',(0.,-1.110223024625E-16,-1.)); +#72244 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72245 = ADVANCED_FACE('',(#72246),#72252,.F.); +#72246 = FACE_BOUND('',#72247,.F.); +#72247 = EDGE_LOOP('',(#72248,#72249,#72250,#72251)); +#72248 = ORIENTED_EDGE('',*,*,#72108,.T.); +#72249 = ORIENTED_EDGE('',*,*,#71085,.T.); +#72250 = ORIENTED_EDGE('',*,*,#72232,.F.); +#72251 = ORIENTED_EDGE('',*,*,#72044,.F.); +#72252 = PLANE('',#72253); +#72253 = AXIS2_PLACEMENT_3D('',#72254,#72255,#72256); +#72254 = CARTESIAN_POINT('',(2.5,1.225,1.46)); +#72255 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72256 = DIRECTION('',(0.,1.110223024625E-16,1.)); +#72257 = ADVANCED_FACE('',(#72258),#72272,.F.); +#72258 = FACE_BOUND('',#72259,.F.); +#72259 = EDGE_LOOP('',(#72260,#72261,#72262,#72263,#72264,#72265,#72266) + ); +#72260 = ORIENTED_EDGE('',*,*,#71722,.T.); +#72261 = ORIENTED_EDGE('',*,*,#71739,.T.); +#72262 = ORIENTED_EDGE('',*,*,#72215,.T.); +#72263 = ORIENTED_EDGE('',*,*,#72191,.T.); +#72264 = ORIENTED_EDGE('',*,*,#71147,.T.); +#72265 = ORIENTED_EDGE('',*,*,#71180,.T.); +#72266 = ORIENTED_EDGE('',*,*,#72267,.T.); +#72267 = EDGE_CURVE('',#71181,#71715,#72268,.T.); +#72268 = LINE('',#72269,#72270); +#72269 = CARTESIAN_POINT('',(2.7,-0.975,1.E-02)); +#72270 = VECTOR('',#72271,1.); +#72271 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#72272 = PLANE('',#72273); +#72273 = AXIS2_PLACEMENT_3D('',#72274,#72275,#72276); +#72274 = CARTESIAN_POINT('',(2.7,-1.843181818182,0.516818181818)); +#72275 = DIRECTION('',(-1.,-0.,-0.)); +#72276 = DIRECTION('',(0.,0.,-1.)); +#72277 = ADVANCED_FACE('',(#72278),#72284,.T.); +#72278 = FACE_BOUND('',#72279,.T.); +#72279 = EDGE_LOOP('',(#72280,#72281,#72282,#72283)); +#72280 = ORIENTED_EDGE('',*,*,#71188,.T.); +#72281 = ORIENTED_EDGE('',*,*,#72267,.T.); +#72282 = ORIENTED_EDGE('',*,*,#71714,.F.); +#72283 = ORIENTED_EDGE('',*,*,#71202,.F.); +#72284 = PLANE('',#72285); +#72285 = AXIS2_PLACEMENT_3D('',#72286,#72287,#72288); +#72286 = CARTESIAN_POINT('',(2.5,-0.975,1.E-02)); +#72287 = DIRECTION('',(0.,5.782411586589E-18,-1.)); +#72288 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#72289 = ADVANCED_FACE('',(#72290),#72296,.T.); +#72290 = FACE_BOUND('',#72291,.T.); +#72291 = EDGE_LOOP('',(#72292,#72293,#72294,#72295)); +#72292 = ORIENTED_EDGE('',*,*,#71267,.T.); +#72293 = ORIENTED_EDGE('',*,*,#71226,.T.); +#72294 = ORIENTED_EDGE('',*,*,#71696,.F.); +#72295 = ORIENTED_EDGE('',*,*,#71682,.F.); +#72296 = PLANE('',#72297); +#72297 = AXIS2_PLACEMENT_3D('',#72298,#72299,#72300); +#72298 = CARTESIAN_POINT('',(-2.7,-0.975,1.E-02)); +#72299 = DIRECTION('',(0.,5.782411586589E-18,-1.)); +#72300 = DIRECTION('',(0.,-1.,-5.782411586589E-18)); +#72301 = ADVANCED_FACE('',(#72302),#72313,.T.); +#72302 = FACE_BOUND('',#72303,.T.); +#72303 = EDGE_LOOP('',(#72304,#72305,#72306,#72312)); +#72304 = ORIENTED_EDGE('',*,*,#72176,.T.); +#72305 = ORIENTED_EDGE('',*,*,#71356,.T.); +#72306 = ORIENTED_EDGE('',*,*,#72307,.F.); +#72307 = EDGE_CURVE('',#71300,#71357,#72308,.T.); +#72308 = LINE('',#72309,#72310); +#72309 = CARTESIAN_POINT('',(-1.6,2.475,0.)); +#72310 = VECTOR('',#72311,1.); +#72311 = DIRECTION('',(1.,0.,0.)); +#72312 = ORIENTED_EDGE('',*,*,#71299,.F.); +#72313 = PLANE('',#72314); +#72314 = AXIS2_PLACEMENT_3D('',#72315,#72316,#72317); +#72315 = CARTESIAN_POINT('',(-1.6,2.475,0.2)); +#72316 = DIRECTION('',(0.,1.,0.)); +#72317 = DIRECTION('',(0.,0.,-1.)); +#72318 = ADVANCED_FACE('',(#72319),#72325,.T.); +#72319 = FACE_BOUND('',#72320,.T.); +#72320 = EDGE_LOOP('',(#72321,#72322,#72323,#72324)); +#72321 = ORIENTED_EDGE('',*,*,#72307,.T.); +#72322 = ORIENTED_EDGE('',*,*,#71364,.T.); +#72323 = ORIENTED_EDGE('',*,*,#71321,.F.); +#72324 = ORIENTED_EDGE('',*,*,#71307,.F.); +#72325 = PLANE('',#72326); +#72326 = AXIS2_PLACEMENT_3D('',#72327,#72328,#72329); +#72327 = CARTESIAN_POINT('',(-1.6,2.475,0.)); +#72328 = DIRECTION('',(0.,0.,-1.)); +#72329 = DIRECTION('',(0.,-1.,0.)); +#72330 = ADVANCED_FACE('',(#72331),#72342,.T.); +#72331 = FACE_BOUND('',#72332,.T.); +#72332 = EDGE_LOOP('',(#72333,#72334,#72335,#72341)); +#72333 = ORIENTED_EDGE('',*,*,#72159,.T.); +#72334 = ORIENTED_EDGE('',*,*,#71453,.T.); +#72335 = ORIENTED_EDGE('',*,*,#72336,.F.); +#72336 = EDGE_CURVE('',#71397,#71454,#72337,.T.); +#72337 = LINE('',#72338,#72339); +#72338 = CARTESIAN_POINT('',(-0.6,2.475,0.)); +#72339 = VECTOR('',#72340,1.); +#72340 = DIRECTION('',(1.,0.,0.)); +#72341 = ORIENTED_EDGE('',*,*,#71396,.F.); +#72342 = PLANE('',#72343); +#72343 = AXIS2_PLACEMENT_3D('',#72344,#72345,#72346); +#72344 = CARTESIAN_POINT('',(-0.6,2.475,0.2)); +#72345 = DIRECTION('',(0.,1.,0.)); +#72346 = DIRECTION('',(0.,0.,-1.)); +#72347 = ADVANCED_FACE('',(#72348),#72354,.T.); +#72348 = FACE_BOUND('',#72349,.T.); +#72349 = EDGE_LOOP('',(#72350,#72351,#72352,#72353)); +#72350 = ORIENTED_EDGE('',*,*,#72336,.T.); +#72351 = ORIENTED_EDGE('',*,*,#71461,.T.); +#72352 = ORIENTED_EDGE('',*,*,#71418,.F.); +#72353 = ORIENTED_EDGE('',*,*,#71404,.F.); +#72354 = PLANE('',#72355); +#72355 = AXIS2_PLACEMENT_3D('',#72356,#72357,#72358); +#72356 = CARTESIAN_POINT('',(-0.6,2.475,0.)); +#72357 = DIRECTION('',(0.,0.,-1.)); +#72358 = DIRECTION('',(0.,-1.,0.)); +#72359 = ADVANCED_FACE('',(#72360),#72371,.T.); +#72360 = FACE_BOUND('',#72361,.T.); +#72361 = EDGE_LOOP('',(#72362,#72363,#72364,#72370)); +#72362 = ORIENTED_EDGE('',*,*,#72142,.T.); +#72363 = ORIENTED_EDGE('',*,*,#71550,.T.); +#72364 = ORIENTED_EDGE('',*,*,#72365,.F.); +#72365 = EDGE_CURVE('',#71494,#71551,#72366,.T.); +#72366 = LINE('',#72367,#72368); +#72367 = CARTESIAN_POINT('',(0.4,2.475,0.)); +#72368 = VECTOR('',#72369,1.); +#72369 = DIRECTION('',(1.,0.,0.)); +#72370 = ORIENTED_EDGE('',*,*,#71493,.F.); +#72371 = PLANE('',#72372); +#72372 = AXIS2_PLACEMENT_3D('',#72373,#72374,#72375); +#72373 = CARTESIAN_POINT('',(0.4,2.475,0.2)); +#72374 = DIRECTION('',(0.,1.,0.)); +#72375 = DIRECTION('',(0.,0.,-1.)); +#72376 = ADVANCED_FACE('',(#72377),#72383,.T.); +#72377 = FACE_BOUND('',#72378,.T.); +#72378 = EDGE_LOOP('',(#72379,#72380,#72381,#72382)); +#72379 = ORIENTED_EDGE('',*,*,#72365,.T.); +#72380 = ORIENTED_EDGE('',*,*,#71558,.T.); +#72381 = ORIENTED_EDGE('',*,*,#71515,.F.); +#72382 = ORIENTED_EDGE('',*,*,#71501,.F.); +#72383 = PLANE('',#72384); +#72384 = AXIS2_PLACEMENT_3D('',#72385,#72386,#72387); +#72385 = CARTESIAN_POINT('',(0.4,2.475,0.)); +#72386 = DIRECTION('',(0.,0.,-1.)); +#72387 = DIRECTION('',(0.,-1.,0.)); +#72388 = ADVANCED_FACE('',(#72389),#72400,.T.); +#72389 = FACE_BOUND('',#72390,.T.); +#72390 = EDGE_LOOP('',(#72391,#72392,#72393,#72399)); +#72391 = ORIENTED_EDGE('',*,*,#72125,.T.); +#72392 = ORIENTED_EDGE('',*,*,#71647,.T.); +#72393 = ORIENTED_EDGE('',*,*,#72394,.F.); +#72394 = EDGE_CURVE('',#71591,#71648,#72395,.T.); +#72395 = LINE('',#72396,#72397); +#72396 = CARTESIAN_POINT('',(1.4,2.475,0.)); +#72397 = VECTOR('',#72398,1.); +#72398 = DIRECTION('',(1.,0.,0.)); +#72399 = ORIENTED_EDGE('',*,*,#71590,.F.); +#72400 = PLANE('',#72401); +#72401 = AXIS2_PLACEMENT_3D('',#72402,#72403,#72404); +#72402 = CARTESIAN_POINT('',(1.4,2.475,0.2)); +#72403 = DIRECTION('',(0.,1.,0.)); +#72404 = DIRECTION('',(0.,0.,-1.)); +#72405 = ADVANCED_FACE('',(#72406),#72412,.T.); +#72406 = FACE_BOUND('',#72407,.T.); +#72407 = EDGE_LOOP('',(#72408,#72409,#72410,#72411)); +#72408 = ORIENTED_EDGE('',*,*,#72394,.T.); +#72409 = ORIENTED_EDGE('',*,*,#71655,.T.); +#72410 = ORIENTED_EDGE('',*,*,#71612,.F.); +#72411 = ORIENTED_EDGE('',*,*,#71598,.F.); +#72412 = PLANE('',#72413); +#72413 = AXIS2_PLACEMENT_3D('',#72414,#72415,#72416); +#72414 = CARTESIAN_POINT('',(1.4,2.475,0.)); +#72415 = DIRECTION('',(0.,0.,-1.)); +#72416 = DIRECTION('',(0.,-1.,0.)); +#72417 = ADVANCED_FACE('',(#72418),#72424,.T.); +#72418 = FACE_BOUND('',#72419,.T.); +#72419 = EDGE_LOOP('',(#72420,#72421,#72422,#72423)); +#72420 = ORIENTED_EDGE('',*,*,#71819,.T.); +#72421 = ORIENTED_EDGE('',*,*,#71842,.T.); +#72422 = ORIENTED_EDGE('',*,*,#71867,.T.); +#72423 = ORIENTED_EDGE('',*,*,#71795,.T.); +#72424 = PLANE('',#72425); +#72425 = AXIS2_PLACEMENT_3D('',#72426,#72427,#72428); +#72426 = CARTESIAN_POINT('',(5.45372713851E-16,-7.5E-02,1.76)); +#72427 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72428 = DIRECTION('',(1.,0.,0.)); +#72429 = ADVANCED_FACE('',(#72430,#72436,#72470,#72504,#72538),#72572, + .T.); +#72430 = FACE_BOUND('',#72431,.T.); +#72431 = EDGE_LOOP('',(#72432,#72433,#72434,#72435)); +#72432 = ORIENTED_EDGE('',*,*,#71772,.T.); +#72433 = ORIENTED_EDGE('',*,*,#71883,.T.); +#72434 = ORIENTED_EDGE('',*,*,#71908,.T.); +#72435 = ORIENTED_EDGE('',*,*,#72019,.T.); +#72436 = FACE_BOUND('',#72437,.T.); +#72437 = EDGE_LOOP('',(#72438,#72448,#72456,#72464)); +#72438 = ORIENTED_EDGE('',*,*,#72439,.F.); +#72439 = EDGE_CURVE('',#72440,#72442,#72444,.T.); +#72440 = VERTEX_POINT('',#72441); +#72441 = CARTESIAN_POINT('',(-1.6,0.525,1.66)); +#72442 = VERTEX_POINT('',#72443); +#72443 = CARTESIAN_POINT('',(-1.4,0.525,1.66)); +#72444 = LINE('',#72445,#72446); +#72445 = CARTESIAN_POINT('',(-1.6,0.525,1.66)); +#72446 = VECTOR('',#72447,1.); +#72447 = DIRECTION('',(1.,0.,0.)); +#72448 = ORIENTED_EDGE('',*,*,#72449,.F.); +#72449 = EDGE_CURVE('',#72450,#72440,#72452,.T.); +#72450 = VERTEX_POINT('',#72451); +#72451 = CARTESIAN_POINT('',(-1.6,0.525,2.14)); +#72452 = LINE('',#72453,#72454); +#72453 = CARTESIAN_POINT('',(-1.6,0.525,2.14)); +#72454 = VECTOR('',#72455,1.); +#72455 = DIRECTION('',(0.,0.,-1.)); +#72456 = ORIENTED_EDGE('',*,*,#72457,.T.); +#72457 = EDGE_CURVE('',#72450,#72458,#72460,.T.); +#72458 = VERTEX_POINT('',#72459); +#72459 = CARTESIAN_POINT('',(-1.4,0.525,2.14)); +#72460 = LINE('',#72461,#72462); +#72461 = CARTESIAN_POINT('',(-1.6,0.525,2.14)); +#72462 = VECTOR('',#72463,1.); +#72463 = DIRECTION('',(1.,0.,0.)); +#72464 = ORIENTED_EDGE('',*,*,#72465,.T.); +#72465 = EDGE_CURVE('',#72458,#72442,#72466,.T.); +#72466 = LINE('',#72467,#72468); +#72467 = CARTESIAN_POINT('',(-1.4,0.525,2.14)); +#72468 = VECTOR('',#72469,1.); +#72469 = DIRECTION('',(0.,0.,-1.)); +#72470 = FACE_BOUND('',#72471,.T.); +#72471 = EDGE_LOOP('',(#72472,#72482,#72490,#72498)); +#72472 = ORIENTED_EDGE('',*,*,#72473,.F.); +#72473 = EDGE_CURVE('',#72474,#72476,#72478,.T.); +#72474 = VERTEX_POINT('',#72475); +#72475 = CARTESIAN_POINT('',(-0.6,0.525,2.14)); +#72476 = VERTEX_POINT('',#72477); +#72477 = CARTESIAN_POINT('',(-0.6,0.525,1.66)); +#72478 = LINE('',#72479,#72480); +#72479 = CARTESIAN_POINT('',(-0.6,0.525,2.14)); +#72480 = VECTOR('',#72481,1.); +#72481 = DIRECTION('',(0.,0.,-1.)); +#72482 = ORIENTED_EDGE('',*,*,#72483,.T.); +#72483 = EDGE_CURVE('',#72474,#72484,#72486,.T.); +#72484 = VERTEX_POINT('',#72485); +#72485 = CARTESIAN_POINT('',(-0.4,0.525,2.14)); +#72486 = LINE('',#72487,#72488); +#72487 = CARTESIAN_POINT('',(-0.6,0.525,2.14)); +#72488 = VECTOR('',#72489,1.); +#72489 = DIRECTION('',(1.,0.,0.)); +#72490 = ORIENTED_EDGE('',*,*,#72491,.T.); +#72491 = EDGE_CURVE('',#72484,#72492,#72494,.T.); +#72492 = VERTEX_POINT('',#72493); +#72493 = CARTESIAN_POINT('',(-0.4,0.525,1.66)); +#72494 = LINE('',#72495,#72496); +#72495 = CARTESIAN_POINT('',(-0.4,0.525,2.14)); +#72496 = VECTOR('',#72497,1.); +#72497 = DIRECTION('',(0.,0.,-1.)); +#72498 = ORIENTED_EDGE('',*,*,#72499,.F.); +#72499 = EDGE_CURVE('',#72476,#72492,#72500,.T.); +#72500 = LINE('',#72501,#72502); +#72501 = CARTESIAN_POINT('',(-0.6,0.525,1.66)); +#72502 = VECTOR('',#72503,1.); +#72503 = DIRECTION('',(1.,0.,0.)); +#72504 = FACE_BOUND('',#72505,.T.); +#72505 = EDGE_LOOP('',(#72506,#72516,#72524,#72532)); +#72506 = ORIENTED_EDGE('',*,*,#72507,.F.); +#72507 = EDGE_CURVE('',#72508,#72510,#72512,.T.); +#72508 = VERTEX_POINT('',#72509); +#72509 = CARTESIAN_POINT('',(0.4,0.525,2.14)); +#72510 = VERTEX_POINT('',#72511); +#72511 = CARTESIAN_POINT('',(0.4,0.525,1.66)); +#72512 = LINE('',#72513,#72514); +#72513 = CARTESIAN_POINT('',(0.4,0.525,2.14)); +#72514 = VECTOR('',#72515,1.); +#72515 = DIRECTION('',(0.,0.,-1.)); +#72516 = ORIENTED_EDGE('',*,*,#72517,.T.); +#72517 = EDGE_CURVE('',#72508,#72518,#72520,.T.); +#72518 = VERTEX_POINT('',#72519); +#72519 = CARTESIAN_POINT('',(0.6,0.525,2.14)); +#72520 = LINE('',#72521,#72522); +#72521 = CARTESIAN_POINT('',(0.4,0.525,2.14)); +#72522 = VECTOR('',#72523,1.); +#72523 = DIRECTION('',(1.,0.,0.)); +#72524 = ORIENTED_EDGE('',*,*,#72525,.T.); +#72525 = EDGE_CURVE('',#72518,#72526,#72528,.T.); +#72526 = VERTEX_POINT('',#72527); +#72527 = CARTESIAN_POINT('',(0.6,0.525,1.66)); +#72528 = LINE('',#72529,#72530); +#72529 = CARTESIAN_POINT('',(0.6,0.525,2.14)); +#72530 = VECTOR('',#72531,1.); +#72531 = DIRECTION('',(0.,0.,-1.)); +#72532 = ORIENTED_EDGE('',*,*,#72533,.F.); +#72533 = EDGE_CURVE('',#72510,#72526,#72534,.T.); +#72534 = LINE('',#72535,#72536); +#72535 = CARTESIAN_POINT('',(0.4,0.525,1.66)); +#72536 = VECTOR('',#72537,1.); +#72537 = DIRECTION('',(1.,0.,0.)); +#72538 = FACE_BOUND('',#72539,.T.); +#72539 = EDGE_LOOP('',(#72540,#72550,#72558,#72566)); +#72540 = ORIENTED_EDGE('',*,*,#72541,.F.); +#72541 = EDGE_CURVE('',#72542,#72544,#72546,.T.); +#72542 = VERTEX_POINT('',#72543); +#72543 = CARTESIAN_POINT('',(1.4,0.525,2.14)); +#72544 = VERTEX_POINT('',#72545); +#72545 = CARTESIAN_POINT('',(1.4,0.525,1.66)); +#72546 = LINE('',#72547,#72548); +#72547 = CARTESIAN_POINT('',(1.4,0.525,2.14)); +#72548 = VECTOR('',#72549,1.); +#72549 = DIRECTION('',(0.,0.,-1.)); +#72550 = ORIENTED_EDGE('',*,*,#72551,.T.); +#72551 = EDGE_CURVE('',#72542,#72552,#72554,.T.); +#72552 = VERTEX_POINT('',#72553); +#72553 = CARTESIAN_POINT('',(1.6,0.525,2.14)); +#72554 = LINE('',#72555,#72556); +#72555 = CARTESIAN_POINT('',(1.4,0.525,2.14)); +#72556 = VECTOR('',#72557,1.); +#72557 = DIRECTION('',(1.,0.,0.)); +#72558 = ORIENTED_EDGE('',*,*,#72559,.T.); +#72559 = EDGE_CURVE('',#72552,#72560,#72562,.T.); +#72560 = VERTEX_POINT('',#72561); +#72561 = CARTESIAN_POINT('',(1.6,0.525,1.66)); +#72562 = LINE('',#72563,#72564); +#72563 = CARTESIAN_POINT('',(1.6,0.525,2.14)); +#72564 = VECTOR('',#72565,1.); +#72565 = DIRECTION('',(0.,0.,-1.)); +#72566 = ORIENTED_EDGE('',*,*,#72567,.F.); +#72567 = EDGE_CURVE('',#72544,#72560,#72568,.T.); +#72568 = LINE('',#72569,#72570); +#72569 = CARTESIAN_POINT('',(1.4,0.525,1.66)); +#72570 = VECTOR('',#72571,1.); +#72571 = DIRECTION('',(1.,0.,0.)); +#72572 = PLANE('',#72573); +#72573 = AXIS2_PLACEMENT_3D('',#72574,#72575,#72576); +#72574 = CARTESIAN_POINT('',(-6.832141690001E-17,0.525,1.51)); +#72575 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72576 = DIRECTION('',(1.,0.,0.)); +#72577 = ADVANCED_FACE('',(#72578),#72584,.T.); +#72578 = FACE_BOUND('',#72579,.T.); +#72579 = EDGE_LOOP('',(#72580,#72581,#72582,#72583)); +#72580 = ORIENTED_EDGE('',*,*,#72003,.T.); +#72581 = ORIENTED_EDGE('',*,*,#71931,.T.); +#72582 = ORIENTED_EDGE('',*,*,#71955,.T.); +#72583 = ORIENTED_EDGE('',*,*,#71978,.T.); +#72584 = PLANE('',#72585); +#72585 = AXIS2_PLACEMENT_3D('',#72586,#72587,#72588); +#72586 = CARTESIAN_POINT('',(5.45372713851E-16,-7.5E-02,1.76)); +#72587 = DIRECTION('',(0.,-1.,1.110223024625E-16)); +#72588 = DIRECTION('',(1.,0.,0.)); +#72589 = ADVANCED_FACE('',(#72590),#72615,.T.); +#72590 = FACE_BOUND('',#72591,.T.); +#72591 = EDGE_LOOP('',(#72592,#72593,#72601,#72609)); +#72592 = ORIENTED_EDGE('',*,*,#72439,.T.); +#72593 = ORIENTED_EDGE('',*,*,#72594,.T.); +#72594 = EDGE_CURVE('',#72442,#72595,#72597,.T.); +#72595 = VERTEX_POINT('',#72596); +#72596 = CARTESIAN_POINT('',(-1.4,-1.225,1.79)); +#72597 = LINE('',#72598,#72599); +#72598 = CARTESIAN_POINT('',(-1.4,0.525,1.66)); +#72599 = VECTOR('',#72600,1.); +#72600 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72601 = ORIENTED_EDGE('',*,*,#72602,.F.); +#72602 = EDGE_CURVE('',#72603,#72595,#72605,.T.); +#72603 = VERTEX_POINT('',#72604); +#72604 = CARTESIAN_POINT('',(-1.6,-1.225,1.79)); +#72605 = LINE('',#72606,#72607); +#72606 = CARTESIAN_POINT('',(-1.6,-1.225,1.79)); +#72607 = VECTOR('',#72608,1.); +#72608 = DIRECTION('',(1.,0.,0.)); +#72609 = ORIENTED_EDGE('',*,*,#72610,.F.); +#72610 = EDGE_CURVE('',#72440,#72603,#72611,.T.); +#72611 = LINE('',#72612,#72613); +#72612 = CARTESIAN_POINT('',(-1.6,0.525,1.66)); +#72613 = VECTOR('',#72614,1.); +#72614 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72615 = PLANE('',#72616); +#72616 = AXIS2_PLACEMENT_3D('',#72617,#72618,#72619); +#72617 = CARTESIAN_POINT('',(-1.6,0.525,1.66)); +#72618 = DIRECTION('',(0.,-7.408159078957E-02,-0.997252183706)); +#72619 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72620 = ADVANCED_FACE('',(#72621),#72639,.F.); +#72621 = FACE_BOUND('',#72622,.F.); +#72622 = EDGE_LOOP('',(#72623,#72631,#72637,#72638)); +#72623 = ORIENTED_EDGE('',*,*,#72624,.T.); +#72624 = EDGE_CURVE('',#72595,#72625,#72627,.T.); +#72625 = VERTEX_POINT('',#72626); +#72626 = CARTESIAN_POINT('',(-1.4,-1.225,2.14)); +#72627 = LINE('',#72628,#72629); +#72628 = CARTESIAN_POINT('',(-1.4,-1.225,1.79)); +#72629 = VECTOR('',#72630,1.); +#72630 = DIRECTION('',(0.,0.,1.)); +#72631 = ORIENTED_EDGE('',*,*,#72632,.T.); +#72632 = EDGE_CURVE('',#72625,#72458,#72633,.T.); +#72633 = LINE('',#72634,#72635); +#72634 = CARTESIAN_POINT('',(-1.4,-1.225,2.14)); +#72635 = VECTOR('',#72636,1.); +#72636 = DIRECTION('',(0.,1.,0.)); +#72637 = ORIENTED_EDGE('',*,*,#72465,.T.); +#72638 = ORIENTED_EDGE('',*,*,#72594,.T.); +#72639 = PLANE('',#72640); +#72640 = AXIS2_PLACEMENT_3D('',#72641,#72642,#72643); +#72641 = CARTESIAN_POINT('',(-1.4,-0.323759014354,1.931294517928)); +#72642 = DIRECTION('',(-1.,-0.,-0.)); +#72643 = DIRECTION('',(0.,0.,-1.)); +#72644 = ADVANCED_FACE('',(#72645),#72663,.T.); +#72645 = FACE_BOUND('',#72646,.T.); +#72646 = EDGE_LOOP('',(#72647,#72655,#72656,#72657)); +#72647 = ORIENTED_EDGE('',*,*,#72648,.T.); +#72648 = EDGE_CURVE('',#72649,#72625,#72651,.T.); +#72649 = VERTEX_POINT('',#72650); +#72650 = CARTESIAN_POINT('',(-1.6,-1.225,2.14)); +#72651 = LINE('',#72652,#72653); +#72652 = CARTESIAN_POINT('',(-1.6,-1.225,2.14)); +#72653 = VECTOR('',#72654,1.); +#72654 = DIRECTION('',(1.,0.,0.)); +#72655 = ORIENTED_EDGE('',*,*,#72632,.T.); +#72656 = ORIENTED_EDGE('',*,*,#72457,.F.); +#72657 = ORIENTED_EDGE('',*,*,#72658,.F.); +#72658 = EDGE_CURVE('',#72649,#72450,#72659,.T.); +#72659 = LINE('',#72660,#72661); +#72660 = CARTESIAN_POINT('',(-1.6,-1.225,2.14)); +#72661 = VECTOR('',#72662,1.); +#72662 = DIRECTION('',(0.,1.,0.)); +#72663 = PLANE('',#72664); +#72664 = AXIS2_PLACEMENT_3D('',#72665,#72666,#72667); +#72665 = CARTESIAN_POINT('',(-1.6,-1.225,2.14)); +#72666 = DIRECTION('',(0.,0.,1.)); +#72667 = DIRECTION('',(0.,1.,0.)); +#72668 = ADVANCED_FACE('',(#72669),#72680,.T.); +#72669 = FACE_BOUND('',#72670,.T.); +#72670 = EDGE_LOOP('',(#72671,#72677,#72678,#72679)); +#72671 = ORIENTED_EDGE('',*,*,#72672,.T.); +#72672 = EDGE_CURVE('',#72603,#72649,#72673,.T.); +#72673 = LINE('',#72674,#72675); +#72674 = CARTESIAN_POINT('',(-1.6,-1.225,1.79)); +#72675 = VECTOR('',#72676,1.); +#72676 = DIRECTION('',(0.,0.,1.)); +#72677 = ORIENTED_EDGE('',*,*,#72658,.T.); +#72678 = ORIENTED_EDGE('',*,*,#72449,.T.); +#72679 = ORIENTED_EDGE('',*,*,#72610,.T.); +#72680 = PLANE('',#72681); +#72681 = AXIS2_PLACEMENT_3D('',#72682,#72683,#72684); +#72682 = CARTESIAN_POINT('',(-1.6,-0.323759014354,1.931294517928)); +#72683 = DIRECTION('',(-1.,-0.,-0.)); +#72684 = DIRECTION('',(0.,0.,-1.)); +#72685 = ADVANCED_FACE('',(#72686),#72711,.T.); +#72686 = FACE_BOUND('',#72687,.T.); +#72687 = EDGE_LOOP('',(#72688,#72698,#72704,#72705)); +#72688 = ORIENTED_EDGE('',*,*,#72689,.T.); +#72689 = EDGE_CURVE('',#72690,#72692,#72694,.T.); +#72690 = VERTEX_POINT('',#72691); +#72691 = CARTESIAN_POINT('',(-0.6,-1.225,1.79)); +#72692 = VERTEX_POINT('',#72693); +#72693 = CARTESIAN_POINT('',(-0.6,-1.225,2.14)); +#72694 = LINE('',#72695,#72696); +#72695 = CARTESIAN_POINT('',(-0.6,-1.225,1.79)); +#72696 = VECTOR('',#72697,1.); +#72697 = DIRECTION('',(0.,0.,1.)); +#72698 = ORIENTED_EDGE('',*,*,#72699,.T.); +#72699 = EDGE_CURVE('',#72692,#72474,#72700,.T.); +#72700 = LINE('',#72701,#72702); +#72701 = CARTESIAN_POINT('',(-0.6,-1.225,2.14)); +#72702 = VECTOR('',#72703,1.); +#72703 = DIRECTION('',(0.,1.,0.)); +#72704 = ORIENTED_EDGE('',*,*,#72473,.T.); +#72705 = ORIENTED_EDGE('',*,*,#72706,.T.); +#72706 = EDGE_CURVE('',#72476,#72690,#72707,.T.); +#72707 = LINE('',#72708,#72709); +#72708 = CARTESIAN_POINT('',(-0.6,0.525,1.66)); +#72709 = VECTOR('',#72710,1.); +#72710 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72711 = PLANE('',#72712); +#72712 = AXIS2_PLACEMENT_3D('',#72713,#72714,#72715); +#72713 = CARTESIAN_POINT('',(-0.6,-0.323759014354,1.931294517928)); +#72714 = DIRECTION('',(-1.,-0.,-0.)); +#72715 = DIRECTION('',(0.,0.,-1.)); +#72716 = ADVANCED_FACE('',(#72717),#72735,.T.); +#72717 = FACE_BOUND('',#72718,.T.); +#72718 = EDGE_LOOP('',(#72719,#72720,#72728,#72734)); +#72719 = ORIENTED_EDGE('',*,*,#72499,.T.); +#72720 = ORIENTED_EDGE('',*,*,#72721,.T.); +#72721 = EDGE_CURVE('',#72492,#72722,#72724,.T.); +#72722 = VERTEX_POINT('',#72723); +#72723 = CARTESIAN_POINT('',(-0.4,-1.225,1.79)); +#72724 = LINE('',#72725,#72726); +#72725 = CARTESIAN_POINT('',(-0.4,0.525,1.66)); +#72726 = VECTOR('',#72727,1.); +#72727 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72728 = ORIENTED_EDGE('',*,*,#72729,.F.); +#72729 = EDGE_CURVE('',#72690,#72722,#72730,.T.); +#72730 = LINE('',#72731,#72732); +#72731 = CARTESIAN_POINT('',(-0.6,-1.225,1.79)); +#72732 = VECTOR('',#72733,1.); +#72733 = DIRECTION('',(1.,0.,0.)); +#72734 = ORIENTED_EDGE('',*,*,#72706,.F.); +#72735 = PLANE('',#72736); +#72736 = AXIS2_PLACEMENT_3D('',#72737,#72738,#72739); +#72737 = CARTESIAN_POINT('',(-0.6,0.525,1.66)); +#72738 = DIRECTION('',(0.,-7.408159078957E-02,-0.997252183706)); +#72739 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72740 = ADVANCED_FACE('',(#72741),#72759,.F.); +#72741 = FACE_BOUND('',#72742,.F.); +#72742 = EDGE_LOOP('',(#72743,#72751,#72757,#72758)); +#72743 = ORIENTED_EDGE('',*,*,#72744,.T.); +#72744 = EDGE_CURVE('',#72722,#72745,#72747,.T.); +#72745 = VERTEX_POINT('',#72746); +#72746 = CARTESIAN_POINT('',(-0.4,-1.225,2.14)); +#72747 = LINE('',#72748,#72749); +#72748 = CARTESIAN_POINT('',(-0.4,-1.225,1.79)); +#72749 = VECTOR('',#72750,1.); +#72750 = DIRECTION('',(0.,0.,1.)); +#72751 = ORIENTED_EDGE('',*,*,#72752,.T.); +#72752 = EDGE_CURVE('',#72745,#72484,#72753,.T.); +#72753 = LINE('',#72754,#72755); +#72754 = CARTESIAN_POINT('',(-0.4,-1.225,2.14)); +#72755 = VECTOR('',#72756,1.); +#72756 = DIRECTION('',(0.,1.,0.)); +#72757 = ORIENTED_EDGE('',*,*,#72491,.T.); +#72758 = ORIENTED_EDGE('',*,*,#72721,.T.); +#72759 = PLANE('',#72760); +#72760 = AXIS2_PLACEMENT_3D('',#72761,#72762,#72763); +#72761 = CARTESIAN_POINT('',(-0.4,-0.323759014354,1.931294517928)); +#72762 = DIRECTION('',(-1.,-0.,-0.)); +#72763 = DIRECTION('',(0.,0.,-1.)); +#72764 = ADVANCED_FACE('',(#72765),#72776,.T.); +#72765 = FACE_BOUND('',#72766,.T.); +#72766 = EDGE_LOOP('',(#72767,#72773,#72774,#72775)); +#72767 = ORIENTED_EDGE('',*,*,#72768,.T.); +#72768 = EDGE_CURVE('',#72692,#72745,#72769,.T.); +#72769 = LINE('',#72770,#72771); +#72770 = CARTESIAN_POINT('',(-0.6,-1.225,2.14)); +#72771 = VECTOR('',#72772,1.); +#72772 = DIRECTION('',(1.,0.,0.)); +#72773 = ORIENTED_EDGE('',*,*,#72752,.T.); +#72774 = ORIENTED_EDGE('',*,*,#72483,.F.); +#72775 = ORIENTED_EDGE('',*,*,#72699,.F.); +#72776 = PLANE('',#72777); +#72777 = AXIS2_PLACEMENT_3D('',#72778,#72779,#72780); +#72778 = CARTESIAN_POINT('',(-0.6,-1.225,2.14)); +#72779 = DIRECTION('',(0.,0.,1.)); +#72780 = DIRECTION('',(0.,1.,0.)); +#72781 = ADVANCED_FACE('',(#72782),#72807,.T.); +#72782 = FACE_BOUND('',#72783,.T.); +#72783 = EDGE_LOOP('',(#72784,#72794,#72800,#72801)); +#72784 = ORIENTED_EDGE('',*,*,#72785,.T.); +#72785 = EDGE_CURVE('',#72786,#72788,#72790,.T.); +#72786 = VERTEX_POINT('',#72787); +#72787 = CARTESIAN_POINT('',(0.4,-1.225,1.79)); +#72788 = VERTEX_POINT('',#72789); +#72789 = CARTESIAN_POINT('',(0.4,-1.225,2.14)); +#72790 = LINE('',#72791,#72792); +#72791 = CARTESIAN_POINT('',(0.4,-1.225,1.79)); +#72792 = VECTOR('',#72793,1.); +#72793 = DIRECTION('',(0.,0.,1.)); +#72794 = ORIENTED_EDGE('',*,*,#72795,.T.); +#72795 = EDGE_CURVE('',#72788,#72508,#72796,.T.); +#72796 = LINE('',#72797,#72798); +#72797 = CARTESIAN_POINT('',(0.4,-1.225,2.14)); +#72798 = VECTOR('',#72799,1.); +#72799 = DIRECTION('',(0.,1.,0.)); +#72800 = ORIENTED_EDGE('',*,*,#72507,.T.); +#72801 = ORIENTED_EDGE('',*,*,#72802,.T.); +#72802 = EDGE_CURVE('',#72510,#72786,#72803,.T.); +#72803 = LINE('',#72804,#72805); +#72804 = CARTESIAN_POINT('',(0.4,0.525,1.66)); +#72805 = VECTOR('',#72806,1.); +#72806 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72807 = PLANE('',#72808); +#72808 = AXIS2_PLACEMENT_3D('',#72809,#72810,#72811); +#72809 = CARTESIAN_POINT('',(0.4,-0.323759014354,1.931294517928)); +#72810 = DIRECTION('',(-1.,-0.,-0.)); +#72811 = DIRECTION('',(0.,0.,-1.)); +#72812 = ADVANCED_FACE('',(#72813),#72831,.T.); +#72813 = FACE_BOUND('',#72814,.T.); +#72814 = EDGE_LOOP('',(#72815,#72816,#72824,#72830)); +#72815 = ORIENTED_EDGE('',*,*,#72533,.T.); +#72816 = ORIENTED_EDGE('',*,*,#72817,.T.); +#72817 = EDGE_CURVE('',#72526,#72818,#72820,.T.); +#72818 = VERTEX_POINT('',#72819); +#72819 = CARTESIAN_POINT('',(0.6,-1.225,1.79)); +#72820 = LINE('',#72821,#72822); +#72821 = CARTESIAN_POINT('',(0.6,0.525,1.66)); +#72822 = VECTOR('',#72823,1.); +#72823 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72824 = ORIENTED_EDGE('',*,*,#72825,.F.); +#72825 = EDGE_CURVE('',#72786,#72818,#72826,.T.); +#72826 = LINE('',#72827,#72828); +#72827 = CARTESIAN_POINT('',(0.4,-1.225,1.79)); +#72828 = VECTOR('',#72829,1.); +#72829 = DIRECTION('',(1.,0.,0.)); +#72830 = ORIENTED_EDGE('',*,*,#72802,.F.); +#72831 = PLANE('',#72832); +#72832 = AXIS2_PLACEMENT_3D('',#72833,#72834,#72835); +#72833 = CARTESIAN_POINT('',(0.4,0.525,1.66)); +#72834 = DIRECTION('',(0.,-7.408159078957E-02,-0.997252183706)); +#72835 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72836 = ADVANCED_FACE('',(#72837),#72855,.F.); +#72837 = FACE_BOUND('',#72838,.F.); +#72838 = EDGE_LOOP('',(#72839,#72847,#72853,#72854)); +#72839 = ORIENTED_EDGE('',*,*,#72840,.T.); +#72840 = EDGE_CURVE('',#72818,#72841,#72843,.T.); +#72841 = VERTEX_POINT('',#72842); +#72842 = CARTESIAN_POINT('',(0.6,-1.225,2.14)); +#72843 = LINE('',#72844,#72845); +#72844 = CARTESIAN_POINT('',(0.6,-1.225,1.79)); +#72845 = VECTOR('',#72846,1.); +#72846 = DIRECTION('',(0.,0.,1.)); +#72847 = ORIENTED_EDGE('',*,*,#72848,.T.); +#72848 = EDGE_CURVE('',#72841,#72518,#72849,.T.); +#72849 = LINE('',#72850,#72851); +#72850 = CARTESIAN_POINT('',(0.6,-1.225,2.14)); +#72851 = VECTOR('',#72852,1.); +#72852 = DIRECTION('',(0.,1.,0.)); +#72853 = ORIENTED_EDGE('',*,*,#72525,.T.); +#72854 = ORIENTED_EDGE('',*,*,#72817,.T.); +#72855 = PLANE('',#72856); +#72856 = AXIS2_PLACEMENT_3D('',#72857,#72858,#72859); +#72857 = CARTESIAN_POINT('',(0.6,-0.323759014354,1.931294517928)); +#72858 = DIRECTION('',(-1.,-0.,-0.)); +#72859 = DIRECTION('',(0.,0.,-1.)); +#72860 = ADVANCED_FACE('',(#72861),#72872,.T.); +#72861 = FACE_BOUND('',#72862,.T.); +#72862 = EDGE_LOOP('',(#72863,#72869,#72870,#72871)); +#72863 = ORIENTED_EDGE('',*,*,#72864,.T.); +#72864 = EDGE_CURVE('',#72788,#72841,#72865,.T.); +#72865 = LINE('',#72866,#72867); +#72866 = CARTESIAN_POINT('',(0.4,-1.225,2.14)); +#72867 = VECTOR('',#72868,1.); +#72868 = DIRECTION('',(1.,0.,0.)); +#72869 = ORIENTED_EDGE('',*,*,#72848,.T.); +#72870 = ORIENTED_EDGE('',*,*,#72517,.F.); +#72871 = ORIENTED_EDGE('',*,*,#72795,.F.); +#72872 = PLANE('',#72873); +#72873 = AXIS2_PLACEMENT_3D('',#72874,#72875,#72876); +#72874 = CARTESIAN_POINT('',(0.4,-1.225,2.14)); +#72875 = DIRECTION('',(0.,0.,1.)); +#72876 = DIRECTION('',(0.,1.,0.)); +#72877 = ADVANCED_FACE('',(#72878),#72903,.T.); +#72878 = FACE_BOUND('',#72879,.T.); +#72879 = EDGE_LOOP('',(#72880,#72890,#72896,#72897)); +#72880 = ORIENTED_EDGE('',*,*,#72881,.T.); +#72881 = EDGE_CURVE('',#72882,#72884,#72886,.T.); +#72882 = VERTEX_POINT('',#72883); +#72883 = CARTESIAN_POINT('',(1.4,-1.225,1.79)); +#72884 = VERTEX_POINT('',#72885); +#72885 = CARTESIAN_POINT('',(1.4,-1.225,2.14)); +#72886 = LINE('',#72887,#72888); +#72887 = CARTESIAN_POINT('',(1.4,-1.225,1.79)); +#72888 = VECTOR('',#72889,1.); +#72889 = DIRECTION('',(0.,0.,1.)); +#72890 = ORIENTED_EDGE('',*,*,#72891,.T.); +#72891 = EDGE_CURVE('',#72884,#72542,#72892,.T.); +#72892 = LINE('',#72893,#72894); +#72893 = CARTESIAN_POINT('',(1.4,-1.225,2.14)); +#72894 = VECTOR('',#72895,1.); +#72895 = DIRECTION('',(0.,1.,0.)); +#72896 = ORIENTED_EDGE('',*,*,#72541,.T.); +#72897 = ORIENTED_EDGE('',*,*,#72898,.T.); +#72898 = EDGE_CURVE('',#72544,#72882,#72899,.T.); +#72899 = LINE('',#72900,#72901); +#72900 = CARTESIAN_POINT('',(1.4,0.525,1.66)); +#72901 = VECTOR('',#72902,1.); +#72902 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72903 = PLANE('',#72904); +#72904 = AXIS2_PLACEMENT_3D('',#72905,#72906,#72907); +#72905 = CARTESIAN_POINT('',(1.4,-0.323759014354,1.931294517928)); +#72906 = DIRECTION('',(-1.,-0.,-0.)); +#72907 = DIRECTION('',(0.,0.,-1.)); +#72908 = ADVANCED_FACE('',(#72909),#72927,.T.); +#72909 = FACE_BOUND('',#72910,.T.); +#72910 = EDGE_LOOP('',(#72911,#72912,#72920,#72926)); +#72911 = ORIENTED_EDGE('',*,*,#72567,.T.); +#72912 = ORIENTED_EDGE('',*,*,#72913,.T.); +#72913 = EDGE_CURVE('',#72560,#72914,#72916,.T.); +#72914 = VERTEX_POINT('',#72915); +#72915 = CARTESIAN_POINT('',(1.6,-1.225,1.79)); +#72916 = LINE('',#72917,#72918); +#72917 = CARTESIAN_POINT('',(1.6,0.525,1.66)); +#72918 = VECTOR('',#72919,1.); +#72919 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72920 = ORIENTED_EDGE('',*,*,#72921,.F.); +#72921 = EDGE_CURVE('',#72882,#72914,#72922,.T.); +#72922 = LINE('',#72923,#72924); +#72923 = CARTESIAN_POINT('',(1.4,-1.225,1.79)); +#72924 = VECTOR('',#72925,1.); +#72925 = DIRECTION('',(1.,0.,0.)); +#72926 = ORIENTED_EDGE('',*,*,#72898,.F.); +#72927 = PLANE('',#72928); +#72928 = AXIS2_PLACEMENT_3D('',#72929,#72930,#72931); +#72929 = CARTESIAN_POINT('',(1.4,0.525,1.66)); +#72930 = DIRECTION('',(0.,-7.408159078957E-02,-0.997252183706)); +#72931 = DIRECTION('',(0.,-0.997252183706,7.408159078957E-02)); +#72932 = ADVANCED_FACE('',(#72933),#72951,.F.); +#72933 = FACE_BOUND('',#72934,.F.); +#72934 = EDGE_LOOP('',(#72935,#72943,#72949,#72950)); +#72935 = ORIENTED_EDGE('',*,*,#72936,.T.); +#72936 = EDGE_CURVE('',#72914,#72937,#72939,.T.); +#72937 = VERTEX_POINT('',#72938); +#72938 = CARTESIAN_POINT('',(1.6,-1.225,2.14)); +#72939 = LINE('',#72940,#72941); +#72940 = CARTESIAN_POINT('',(1.6,-1.225,1.79)); +#72941 = VECTOR('',#72942,1.); +#72942 = DIRECTION('',(0.,0.,1.)); +#72943 = ORIENTED_EDGE('',*,*,#72944,.T.); +#72944 = EDGE_CURVE('',#72937,#72552,#72945,.T.); +#72945 = LINE('',#72946,#72947); +#72946 = CARTESIAN_POINT('',(1.6,-1.225,2.14)); +#72947 = VECTOR('',#72948,1.); +#72948 = DIRECTION('',(0.,1.,0.)); +#72949 = ORIENTED_EDGE('',*,*,#72559,.T.); +#72950 = ORIENTED_EDGE('',*,*,#72913,.T.); +#72951 = PLANE('',#72952); +#72952 = AXIS2_PLACEMENT_3D('',#72953,#72954,#72955); +#72953 = CARTESIAN_POINT('',(1.6,-0.323759014354,1.931294517928)); +#72954 = DIRECTION('',(-1.,-0.,-0.)); +#72955 = DIRECTION('',(0.,0.,-1.)); +#72956 = ADVANCED_FACE('',(#72957),#72968,.T.); +#72957 = FACE_BOUND('',#72958,.T.); +#72958 = EDGE_LOOP('',(#72959,#72965,#72966,#72967)); +#72959 = ORIENTED_EDGE('',*,*,#72960,.T.); +#72960 = EDGE_CURVE('',#72884,#72937,#72961,.T.); +#72961 = LINE('',#72962,#72963); +#72962 = CARTESIAN_POINT('',(1.4,-1.225,2.14)); +#72963 = VECTOR('',#72964,1.); +#72964 = DIRECTION('',(1.,0.,0.)); +#72965 = ORIENTED_EDGE('',*,*,#72944,.T.); +#72966 = ORIENTED_EDGE('',*,*,#72551,.F.); +#72967 = ORIENTED_EDGE('',*,*,#72891,.F.); +#72968 = PLANE('',#72969); +#72969 = AXIS2_PLACEMENT_3D('',#72970,#72971,#72972); +#72970 = CARTESIAN_POINT('',(1.4,-1.225,2.14)); +#72971 = DIRECTION('',(0.,0.,1.)); +#72972 = DIRECTION('',(0.,1.,0.)); +#72973 = ADVANCED_FACE('',(#72974),#72980,.T.); +#72974 = FACE_BOUND('',#72975,.T.); +#72975 = EDGE_LOOP('',(#72976,#72977,#72978,#72979)); +#72976 = ORIENTED_EDGE('',*,*,#72602,.T.); +#72977 = ORIENTED_EDGE('',*,*,#72624,.T.); +#72978 = ORIENTED_EDGE('',*,*,#72648,.F.); +#72979 = ORIENTED_EDGE('',*,*,#72672,.F.); +#72980 = PLANE('',#72981); +#72981 = AXIS2_PLACEMENT_3D('',#72982,#72983,#72984); +#72982 = CARTESIAN_POINT('',(-1.6,-1.225,1.79)); +#72983 = DIRECTION('',(0.,-1.,0.)); +#72984 = DIRECTION('',(0.,0.,1.)); +#72985 = ADVANCED_FACE('',(#72986),#72992,.T.); +#72986 = FACE_BOUND('',#72987,.T.); +#72987 = EDGE_LOOP('',(#72988,#72989,#72990,#72991)); +#72988 = ORIENTED_EDGE('',*,*,#72729,.T.); +#72989 = ORIENTED_EDGE('',*,*,#72744,.T.); +#72990 = ORIENTED_EDGE('',*,*,#72768,.F.); +#72991 = ORIENTED_EDGE('',*,*,#72689,.F.); +#72992 = PLANE('',#72993); +#72993 = AXIS2_PLACEMENT_3D('',#72994,#72995,#72996); +#72994 = CARTESIAN_POINT('',(-0.6,-1.225,1.79)); +#72995 = DIRECTION('',(0.,-1.,0.)); +#72996 = DIRECTION('',(0.,0.,1.)); +#72997 = ADVANCED_FACE('',(#72998),#73004,.T.); +#72998 = FACE_BOUND('',#72999,.T.); +#72999 = EDGE_LOOP('',(#73000,#73001,#73002,#73003)); +#73000 = ORIENTED_EDGE('',*,*,#72825,.T.); +#73001 = ORIENTED_EDGE('',*,*,#72840,.T.); +#73002 = ORIENTED_EDGE('',*,*,#72864,.F.); +#73003 = ORIENTED_EDGE('',*,*,#72785,.F.); +#73004 = PLANE('',#73005); +#73005 = AXIS2_PLACEMENT_3D('',#73006,#73007,#73008); +#73006 = CARTESIAN_POINT('',(0.4,-1.225,1.79)); +#73007 = DIRECTION('',(0.,-1.,0.)); +#73008 = DIRECTION('',(0.,0.,1.)); +#73009 = ADVANCED_FACE('',(#73010),#73016,.T.); +#73010 = FACE_BOUND('',#73011,.T.); +#73011 = EDGE_LOOP('',(#73012,#73013,#73014,#73015)); +#73012 = ORIENTED_EDGE('',*,*,#72921,.T.); +#73013 = ORIENTED_EDGE('',*,*,#72936,.T.); +#73014 = ORIENTED_EDGE('',*,*,#72960,.F.); +#73015 = ORIENTED_EDGE('',*,*,#72881,.F.); +#73016 = PLANE('',#73017); +#73017 = AXIS2_PLACEMENT_3D('',#73018,#73019,#73020); +#73018 = CARTESIAN_POINT('',(1.4,-1.225,1.79)); +#73019 = DIRECTION('',(0.,-1.,0.)); +#73020 = DIRECTION('',(0.,0.,1.)); +#73021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#73025)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#73022,#73023,#73024)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#73022 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#73023 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#73024 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#73025 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#73022, + 'distance_accuracy_value','confusion accuracy'); +#73026 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73027,#73029); +#73027 = ( REPRESENTATION_RELATIONSHIP('','',#70216,#70193) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73028) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73028 = ITEM_DEFINED_TRANSFORMATION('','',#11,#70194); +#73029 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73030); +#73030 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','=>[0:1:1:22]','',#70188, + #70211,$); +#73031 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#70213)); +#73032 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73033,#73035); +#73033 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73034) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73034 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#73035 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73036); +#73036 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','R_CC2','',#5,#31605,$); +#73037 = SHAPE_DEFINITION_REPRESENTATION(#73038,#73044); +#73038 = PRODUCT_DEFINITION_SHAPE('','',#73039); +#73039 = PRODUCT_DEFINITION('design','',#73040,#73043); +#73040 = PRODUCT_DEFINITION_FORMATION('','',#73041); +#73041 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#73042)); +#73042 = PRODUCT_CONTEXT('',#2,'mechanical'); +#73043 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#73044 = SHAPE_REPRESENTATION('',(#11,#73045),#73049); +#73045 = AXIS2_PLACEMENT_3D('',#73046,#73047,#73048); +#73046 = CARTESIAN_POINT('',(0.,0.,0.)); +#73047 = DIRECTION('',(0.,0.,1.)); +#73048 = DIRECTION('',(1.,0.,-0.)); +#73049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#73053)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#73050,#73051,#73052)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#73050 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#73051 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#73052 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#73053 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#73050, + 'distance_accuracy_value','confusion accuracy'); +#73054 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73055,#73057); +#73055 = ( REPRESENTATION_RELATIONSHIP('','',#73044,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73056) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73056 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#73057 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73058); +#73058 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','C_XBEE_VCC4','',#5,#73039, + $); +#73059 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#73041)); +#73060 = SHAPE_DEFINITION_REPRESENTATION(#73061,#73067); +#73061 = PRODUCT_DEFINITION_SHAPE('','',#73062); +#73062 = PRODUCT_DEFINITION('design','',#73063,#73066); +#73063 = PRODUCT_DEFINITION_FORMATION('','',#73064); +#73064 = PRODUCT('C_0603_1608Metric','C_0603_1608Metric','',(#73065)); +#73065 = PRODUCT_CONTEXT('',#2,'mechanical'); +#73066 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#73067 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#73068),#73922); +#73068 = MANIFOLD_SOLID_BREP('',#73069); +#73069 = CLOSED_SHELL('',(#73070,#73146,#73177,#73202,#73227,#73251, + #73275,#73300,#73325,#73342,#73428,#73460,#73484,#73509,#73533, + #73558,#73582,#73607,#73624,#73710,#73741,#73766,#73791,#73815, + #73839,#73864,#73889,#73906)); +#73070 = ADVANCED_FACE('',(#73071),#73141,.F.); +#73071 = FACE_BOUND('',#73072,.F.); +#73072 = EDGE_LOOP('',(#73073,#73083,#73092,#73100,#73109,#73117,#73126, + #73134)); +#73073 = ORIENTED_EDGE('',*,*,#73074,.F.); +#73074 = EDGE_CURVE('',#73075,#73077,#73079,.T.); +#73075 = VERTEX_POINT('',#73076); +#73076 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#73077 = VERTEX_POINT('',#73078); +#73078 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#73079 = LINE('',#73080,#73081); +#73080 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#73081 = VECTOR('',#73082,1.); +#73082 = DIRECTION('',(0.,0.,1.)); +#73083 = ORIENTED_EDGE('',*,*,#73084,.T.); +#73084 = EDGE_CURVE('',#73075,#73085,#73087,.T.); +#73085 = VERTEX_POINT('',#73086); +#73086 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#73087 = CIRCLE('',#73088,3.E-02); +#73088 = AXIS2_PLACEMENT_3D('',#73089,#73090,#73091); +#73089 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#73090 = DIRECTION('',(1.,0.,-0.)); +#73091 = DIRECTION('',(0.,0.,1.)); +#73092 = ORIENTED_EDGE('',*,*,#73093,.T.); +#73093 = EDGE_CURVE('',#73085,#73094,#73096,.T.); +#73094 = VERTEX_POINT('',#73095); +#73095 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#73096 = LINE('',#73097,#73098); +#73097 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#73098 = VECTOR('',#73099,1.); +#73099 = DIRECTION('',(0.,1.,0.)); +#73100 = ORIENTED_EDGE('',*,*,#73101,.F.); +#73101 = EDGE_CURVE('',#73102,#73094,#73104,.T.); +#73102 = VERTEX_POINT('',#73103); +#73103 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#73104 = CIRCLE('',#73105,3.E-02); +#73105 = AXIS2_PLACEMENT_3D('',#73106,#73107,#73108); +#73106 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#73107 = DIRECTION('',(-1.,0.,0.)); +#73108 = DIRECTION('',(0.,0.,1.)); +#73109 = ORIENTED_EDGE('',*,*,#73110,.T.); +#73110 = EDGE_CURVE('',#73102,#73111,#73113,.T.); +#73111 = VERTEX_POINT('',#73112); +#73112 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#73113 = LINE('',#73114,#73115); +#73114 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#73115 = VECTOR('',#73116,1.); +#73116 = DIRECTION('',(0.,0.,1.)); +#73117 = ORIENTED_EDGE('',*,*,#73118,.T.); +#73118 = EDGE_CURVE('',#73111,#73119,#73121,.T.); +#73119 = VERTEX_POINT('',#73120); +#73120 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#73121 = CIRCLE('',#73122,3.E-02); +#73122 = AXIS2_PLACEMENT_3D('',#73123,#73124,#73125); +#73123 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#73124 = DIRECTION('',(1.,0.,-0.)); +#73125 = DIRECTION('',(0.,0.,1.)); +#73126 = ORIENTED_EDGE('',*,*,#73127,.F.); +#73127 = EDGE_CURVE('',#73128,#73119,#73130,.T.); +#73128 = VERTEX_POINT('',#73129); +#73129 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#73130 = LINE('',#73131,#73132); +#73131 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#73132 = VECTOR('',#73133,1.); +#73133 = DIRECTION('',(0.,1.,0.)); +#73134 = ORIENTED_EDGE('',*,*,#73135,.F.); +#73135 = EDGE_CURVE('',#73077,#73128,#73136,.T.); +#73136 = CIRCLE('',#73137,3.E-02); +#73137 = AXIS2_PLACEMENT_3D('',#73138,#73139,#73140); +#73138 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#73139 = DIRECTION('',(-1.,0.,0.)); +#73140 = DIRECTION('',(0.,0.,1.)); +#73141 = PLANE('',#73142); +#73142 = AXIS2_PLACEMENT_3D('',#73143,#73144,#73145); +#73143 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#73144 = DIRECTION('',(1.,0.,0.)); +#73145 = DIRECTION('',(0.,0.,1.)); +#73146 = ADVANCED_FACE('',(#73147),#73172,.F.); +#73147 = FACE_BOUND('',#73148,.F.); +#73148 = EDGE_LOOP('',(#73149,#73159,#73165,#73166)); +#73149 = ORIENTED_EDGE('',*,*,#73150,.F.); +#73150 = EDGE_CURVE('',#73151,#73153,#73155,.T.); +#73151 = VERTEX_POINT('',#73152); +#73152 = CARTESIAN_POINT('',(-0.5,-0.4,3.E-02)); +#73153 = VERTEX_POINT('',#73154); +#73154 = CARTESIAN_POINT('',(-0.5,-0.4,0.77)); +#73155 = LINE('',#73156,#73157); +#73156 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#73157 = VECTOR('',#73158,1.); +#73158 = DIRECTION('',(0.,0.,1.)); +#73159 = ORIENTED_EDGE('',*,*,#73160,.F.); +#73160 = EDGE_CURVE('',#73075,#73151,#73161,.T.); +#73161 = LINE('',#73162,#73163); +#73162 = CARTESIAN_POINT('',(-0.8,-0.4,3.E-02)); +#73163 = VECTOR('',#73164,1.); +#73164 = DIRECTION('',(1.,0.,0.)); +#73165 = ORIENTED_EDGE('',*,*,#73074,.T.); +#73166 = ORIENTED_EDGE('',*,*,#73167,.T.); +#73167 = EDGE_CURVE('',#73077,#73153,#73168,.T.); +#73168 = LINE('',#73169,#73170); +#73169 = CARTESIAN_POINT('',(-0.8,-0.4,0.77)); +#73170 = VECTOR('',#73171,1.); +#73171 = DIRECTION('',(1.,0.,0.)); +#73172 = PLANE('',#73173); +#73173 = AXIS2_PLACEMENT_3D('',#73174,#73175,#73176); +#73174 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#73175 = DIRECTION('',(0.,1.,0.)); +#73176 = DIRECTION('',(0.,-0.,1.)); +#73177 = ADVANCED_FACE('',(#73178),#73197,.T.); +#73178 = FACE_BOUND('',#73179,.T.); +#73179 = EDGE_LOOP('',(#73180,#73181,#73189,#73196)); +#73180 = ORIENTED_EDGE('',*,*,#73084,.T.); +#73181 = ORIENTED_EDGE('',*,*,#73182,.T.); +#73182 = EDGE_CURVE('',#73085,#73183,#73185,.T.); +#73183 = VERTEX_POINT('',#73184); +#73184 = CARTESIAN_POINT('',(-0.5,-0.37,0.)); +#73185 = LINE('',#73186,#73187); +#73186 = CARTESIAN_POINT('',(-0.8,-0.37,0.)); +#73187 = VECTOR('',#73188,1.); +#73188 = DIRECTION('',(1.,0.,0.)); +#73189 = ORIENTED_EDGE('',*,*,#73190,.F.); +#73190 = EDGE_CURVE('',#73151,#73183,#73191,.T.); +#73191 = CIRCLE('',#73192,3.E-02); +#73192 = AXIS2_PLACEMENT_3D('',#73193,#73194,#73195); +#73193 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#73194 = DIRECTION('',(1.,0.,-0.)); +#73195 = DIRECTION('',(0.,0.,1.)); +#73196 = ORIENTED_EDGE('',*,*,#73160,.F.); +#73197 = CYLINDRICAL_SURFACE('',#73198,3.E-02); +#73198 = AXIS2_PLACEMENT_3D('',#73199,#73200,#73201); +#73199 = CARTESIAN_POINT('',(-0.8,-0.37,3.E-02)); +#73200 = DIRECTION('',(1.,0.,0.)); +#73201 = DIRECTION('',(0.,-1.,0.)); +#73202 = ADVANCED_FACE('',(#73203),#73222,.T.); +#73203 = FACE_BOUND('',#73204,.T.); +#73204 = EDGE_LOOP('',(#73205,#73206,#73215,#73221)); +#73205 = ORIENTED_EDGE('',*,*,#73167,.T.); +#73206 = ORIENTED_EDGE('',*,*,#73207,.T.); +#73207 = EDGE_CURVE('',#73153,#73208,#73210,.T.); +#73208 = VERTEX_POINT('',#73209); +#73209 = CARTESIAN_POINT('',(-0.5,-0.37,0.8)); +#73210 = CIRCLE('',#73211,3.E-02); +#73211 = AXIS2_PLACEMENT_3D('',#73212,#73213,#73214); +#73212 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#73213 = DIRECTION('',(-1.,0.,0.)); +#73214 = DIRECTION('',(0.,0.,1.)); +#73215 = ORIENTED_EDGE('',*,*,#73216,.F.); +#73216 = EDGE_CURVE('',#73128,#73208,#73217,.T.); +#73217 = LINE('',#73218,#73219); +#73218 = CARTESIAN_POINT('',(-0.8,-0.37,0.8)); +#73219 = VECTOR('',#73220,1.); +#73220 = DIRECTION('',(1.,0.,0.)); +#73221 = ORIENTED_EDGE('',*,*,#73135,.F.); +#73222 = CYLINDRICAL_SURFACE('',#73223,3.E-02); +#73223 = AXIS2_PLACEMENT_3D('',#73224,#73225,#73226); +#73224 = CARTESIAN_POINT('',(-0.8,-0.37,0.77)); +#73225 = DIRECTION('',(1.,0.,0.)); +#73226 = DIRECTION('',(0.,-1.,0.)); +#73227 = ADVANCED_FACE('',(#73228),#73246,.F.); +#73228 = FACE_BOUND('',#73229,.F.); +#73229 = EDGE_LOOP('',(#73230,#73231,#73232,#73240)); +#73230 = ORIENTED_EDGE('',*,*,#73093,.F.); +#73231 = ORIENTED_EDGE('',*,*,#73182,.T.); +#73232 = ORIENTED_EDGE('',*,*,#73233,.T.); +#73233 = EDGE_CURVE('',#73183,#73234,#73236,.T.); +#73234 = VERTEX_POINT('',#73235); +#73235 = CARTESIAN_POINT('',(-0.5,0.37,0.)); +#73236 = LINE('',#73237,#73238); +#73237 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#73238 = VECTOR('',#73239,1.); +#73239 = DIRECTION('',(0.,1.,0.)); +#73240 = ORIENTED_EDGE('',*,*,#73241,.F.); +#73241 = EDGE_CURVE('',#73094,#73234,#73242,.T.); +#73242 = LINE('',#73243,#73244); +#73243 = CARTESIAN_POINT('',(-0.8,0.37,0.)); +#73244 = VECTOR('',#73245,1.); +#73245 = DIRECTION('',(1.,0.,0.)); +#73246 = PLANE('',#73247); +#73247 = AXIS2_PLACEMENT_3D('',#73248,#73249,#73250); +#73248 = CARTESIAN_POINT('',(-0.8,-0.4,0.)); +#73249 = DIRECTION('',(0.,0.,1.)); +#73250 = DIRECTION('',(1.,0.,-0.)); +#73251 = ADVANCED_FACE('',(#73252),#73270,.T.); +#73252 = FACE_BOUND('',#73253,.T.); +#73253 = EDGE_LOOP('',(#73254,#73255,#73256,#73264)); +#73254 = ORIENTED_EDGE('',*,*,#73127,.F.); +#73255 = ORIENTED_EDGE('',*,*,#73216,.T.); +#73256 = ORIENTED_EDGE('',*,*,#73257,.T.); +#73257 = EDGE_CURVE('',#73208,#73258,#73260,.T.); +#73258 = VERTEX_POINT('',#73259); +#73259 = CARTESIAN_POINT('',(-0.5,0.37,0.8)); +#73260 = LINE('',#73261,#73262); +#73261 = CARTESIAN_POINT('',(-0.5,-0.4,0.8)); +#73262 = VECTOR('',#73263,1.); +#73263 = DIRECTION('',(0.,1.,0.)); +#73264 = ORIENTED_EDGE('',*,*,#73265,.F.); +#73265 = EDGE_CURVE('',#73119,#73258,#73266,.T.); +#73266 = LINE('',#73267,#73268); +#73267 = CARTESIAN_POINT('',(-0.8,0.37,0.8)); +#73268 = VECTOR('',#73269,1.); +#73269 = DIRECTION('',(1.,0.,0.)); +#73270 = PLANE('',#73271); +#73271 = AXIS2_PLACEMENT_3D('',#73272,#73273,#73274); +#73272 = CARTESIAN_POINT('',(-0.8,-0.4,0.8)); +#73273 = DIRECTION('',(0.,0.,1.)); +#73274 = DIRECTION('',(1.,0.,-0.)); +#73275 = ADVANCED_FACE('',(#73276),#73295,.T.); +#73276 = FACE_BOUND('',#73277,.T.); +#73277 = EDGE_LOOP('',(#73278,#73286,#73293,#73294)); +#73278 = ORIENTED_EDGE('',*,*,#73279,.T.); +#73279 = EDGE_CURVE('',#73102,#73280,#73282,.T.); +#73280 = VERTEX_POINT('',#73281); +#73281 = CARTESIAN_POINT('',(-0.5,0.4,3.E-02)); +#73282 = LINE('',#73283,#73284); +#73283 = CARTESIAN_POINT('',(-0.8,0.4,3.E-02)); +#73284 = VECTOR('',#73285,1.); +#73285 = DIRECTION('',(1.,0.,0.)); +#73286 = ORIENTED_EDGE('',*,*,#73287,.T.); +#73287 = EDGE_CURVE('',#73280,#73234,#73288,.T.); +#73288 = CIRCLE('',#73289,3.E-02); +#73289 = AXIS2_PLACEMENT_3D('',#73290,#73291,#73292); +#73290 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#73291 = DIRECTION('',(-1.,0.,0.)); +#73292 = DIRECTION('',(0.,0.,1.)); +#73293 = ORIENTED_EDGE('',*,*,#73241,.F.); +#73294 = ORIENTED_EDGE('',*,*,#73101,.F.); +#73295 = CYLINDRICAL_SURFACE('',#73296,3.E-02); +#73296 = AXIS2_PLACEMENT_3D('',#73297,#73298,#73299); +#73297 = CARTESIAN_POINT('',(-0.8,0.37,3.E-02)); +#73298 = DIRECTION('',(1.,0.,0.)); +#73299 = DIRECTION('',(-0.,1.,0.)); +#73300 = ADVANCED_FACE('',(#73301),#73320,.T.); +#73301 = FACE_BOUND('',#73302,.T.); +#73302 = EDGE_LOOP('',(#73303,#73304,#73305,#73314)); +#73303 = ORIENTED_EDGE('',*,*,#73118,.T.); +#73304 = ORIENTED_EDGE('',*,*,#73265,.T.); +#73305 = ORIENTED_EDGE('',*,*,#73306,.F.); +#73306 = EDGE_CURVE('',#73307,#73258,#73309,.T.); +#73307 = VERTEX_POINT('',#73308); +#73308 = CARTESIAN_POINT('',(-0.5,0.4,0.77)); +#73309 = CIRCLE('',#73310,3.E-02); +#73310 = AXIS2_PLACEMENT_3D('',#73311,#73312,#73313); +#73311 = CARTESIAN_POINT('',(-0.5,0.37,0.77)); +#73312 = DIRECTION('',(1.,0.,-0.)); +#73313 = DIRECTION('',(0.,0.,1.)); +#73314 = ORIENTED_EDGE('',*,*,#73315,.F.); +#73315 = EDGE_CURVE('',#73111,#73307,#73316,.T.); +#73316 = LINE('',#73317,#73318); +#73317 = CARTESIAN_POINT('',(-0.8,0.4,0.77)); +#73318 = VECTOR('',#73319,1.); +#73319 = DIRECTION('',(1.,0.,0.)); +#73320 = CYLINDRICAL_SURFACE('',#73321,3.E-02); +#73321 = AXIS2_PLACEMENT_3D('',#73322,#73323,#73324); +#73322 = CARTESIAN_POINT('',(-0.8,0.37,0.77)); +#73323 = DIRECTION('',(1.,0.,0.)); +#73324 = DIRECTION('',(-0.,1.,0.)); +#73325 = ADVANCED_FACE('',(#73326),#73337,.T.); +#73326 = FACE_BOUND('',#73327,.T.); +#73327 = EDGE_LOOP('',(#73328,#73334,#73335,#73336)); +#73328 = ORIENTED_EDGE('',*,*,#73329,.F.); +#73329 = EDGE_CURVE('',#73280,#73307,#73330,.T.); +#73330 = LINE('',#73331,#73332); +#73331 = CARTESIAN_POINT('',(-0.5,0.4,0.)); +#73332 = VECTOR('',#73333,1.); +#73333 = DIRECTION('',(0.,0.,1.)); +#73334 = ORIENTED_EDGE('',*,*,#73279,.F.); +#73335 = ORIENTED_EDGE('',*,*,#73110,.T.); +#73336 = ORIENTED_EDGE('',*,*,#73315,.T.); +#73337 = PLANE('',#73338); +#73338 = AXIS2_PLACEMENT_3D('',#73339,#73340,#73341); +#73339 = CARTESIAN_POINT('',(-0.8,0.4,0.)); +#73340 = DIRECTION('',(0.,1.,0.)); +#73341 = DIRECTION('',(0.,-0.,1.)); +#73342 = ADVANCED_FACE('',(#73343,#73353),#73423,.T.); +#73343 = FACE_BOUND('',#73344,.T.); +#73344 = EDGE_LOOP('',(#73345,#73346,#73347,#73348,#73349,#73350,#73351, + #73352)); +#73345 = ORIENTED_EDGE('',*,*,#73150,.F.); +#73346 = ORIENTED_EDGE('',*,*,#73190,.T.); +#73347 = ORIENTED_EDGE('',*,*,#73233,.T.); +#73348 = ORIENTED_EDGE('',*,*,#73287,.F.); +#73349 = ORIENTED_EDGE('',*,*,#73329,.T.); +#73350 = ORIENTED_EDGE('',*,*,#73306,.T.); +#73351 = ORIENTED_EDGE('',*,*,#73257,.F.); +#73352 = ORIENTED_EDGE('',*,*,#73207,.F.); +#73353 = FACE_BOUND('',#73354,.T.); +#73354 = EDGE_LOOP('',(#73355,#73366,#73374,#73383,#73391,#73400,#73408, + #73417)); +#73355 = ORIENTED_EDGE('',*,*,#73356,.F.); +#73356 = EDGE_CURVE('',#73357,#73359,#73361,.T.); +#73357 = VERTEX_POINT('',#73358); +#73358 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#73359 = VERTEX_POINT('',#73360); +#73360 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#73361 = CIRCLE('',#73362,3.E-02); +#73362 = AXIS2_PLACEMENT_3D('',#73363,#73364,#73365); +#73363 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#73364 = DIRECTION('',(1.,0.,-0.)); +#73365 = DIRECTION('',(0.,0.,1.)); +#73366 = ORIENTED_EDGE('',*,*,#73367,.T.); +#73367 = EDGE_CURVE('',#73357,#73368,#73370,.T.); +#73368 = VERTEX_POINT('',#73369); +#73369 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#73370 = LINE('',#73371,#73372); +#73371 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#73372 = VECTOR('',#73373,1.); +#73373 = DIRECTION('',(0.,0.,1.)); +#73374 = ORIENTED_EDGE('',*,*,#73375,.T.); +#73375 = EDGE_CURVE('',#73368,#73376,#73378,.T.); +#73376 = VERTEX_POINT('',#73377); +#73377 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#73378 = CIRCLE('',#73379,3.E-02); +#73379 = AXIS2_PLACEMENT_3D('',#73380,#73381,#73382); +#73380 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#73381 = DIRECTION('',(-1.,0.,0.)); +#73382 = DIRECTION('',(0.,0.,1.)); +#73383 = ORIENTED_EDGE('',*,*,#73384,.T.); +#73384 = EDGE_CURVE('',#73376,#73385,#73387,.T.); +#73385 = VERTEX_POINT('',#73386); +#73386 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#73387 = LINE('',#73388,#73389); +#73388 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#73389 = VECTOR('',#73390,1.); +#73390 = DIRECTION('',(0.,1.,0.)); +#73391 = ORIENTED_EDGE('',*,*,#73392,.F.); +#73392 = EDGE_CURVE('',#73393,#73385,#73395,.T.); +#73393 = VERTEX_POINT('',#73394); +#73394 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#73395 = CIRCLE('',#73396,3.E-02); +#73396 = AXIS2_PLACEMENT_3D('',#73397,#73398,#73399); +#73397 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#73398 = DIRECTION('',(1.,0.,-0.)); +#73399 = DIRECTION('',(0.,0.,1.)); +#73400 = ORIENTED_EDGE('',*,*,#73401,.F.); +#73401 = EDGE_CURVE('',#73402,#73393,#73404,.T.); +#73402 = VERTEX_POINT('',#73403); +#73403 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#73404 = LINE('',#73405,#73406); +#73405 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#73406 = VECTOR('',#73407,1.); +#73407 = DIRECTION('',(0.,0.,1.)); +#73408 = ORIENTED_EDGE('',*,*,#73409,.T.); +#73409 = EDGE_CURVE('',#73402,#73410,#73412,.T.); +#73410 = VERTEX_POINT('',#73411); +#73411 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#73412 = CIRCLE('',#73413,3.E-02); +#73413 = AXIS2_PLACEMENT_3D('',#73414,#73415,#73416); +#73414 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#73415 = DIRECTION('',(-1.,0.,0.)); +#73416 = DIRECTION('',(0.,0.,1.)); +#73417 = ORIENTED_EDGE('',*,*,#73418,.F.); +#73418 = EDGE_CURVE('',#73359,#73410,#73419,.T.); +#73419 = LINE('',#73420,#73421); +#73420 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#73421 = VECTOR('',#73422,1.); +#73422 = DIRECTION('',(0.,1.,0.)); +#73423 = PLANE('',#73424); +#73424 = AXIS2_PLACEMENT_3D('',#73425,#73426,#73427); +#73425 = CARTESIAN_POINT('',(-0.5,-0.4,0.)); +#73426 = DIRECTION('',(1.,0.,0.)); +#73427 = DIRECTION('',(0.,0.,1.)); +#73428 = ADVANCED_FACE('',(#73429),#73455,.T.); +#73429 = FACE_BOUND('',#73430,.T.); +#73430 = EDGE_LOOP('',(#73431,#73432,#73440,#73449)); +#73431 = ORIENTED_EDGE('',*,*,#73356,.T.); +#73432 = ORIENTED_EDGE('',*,*,#73433,.T.); +#73433 = EDGE_CURVE('',#73359,#73434,#73436,.T.); +#73434 = VERTEX_POINT('',#73435); +#73435 = CARTESIAN_POINT('',(0.5,-0.34,3.E-02)); +#73436 = LINE('',#73437,#73438); +#73437 = CARTESIAN_POINT('',(-0.5,-0.34,3.E-02)); +#73438 = VECTOR('',#73439,1.); +#73439 = DIRECTION('',(1.,0.,0.)); +#73440 = ORIENTED_EDGE('',*,*,#73441,.F.); +#73441 = EDGE_CURVE('',#73442,#73434,#73444,.T.); +#73442 = VERTEX_POINT('',#73443); +#73443 = CARTESIAN_POINT('',(0.5,-0.37,6.E-02)); +#73444 = CIRCLE('',#73445,3.E-02); +#73445 = AXIS2_PLACEMENT_3D('',#73446,#73447,#73448); +#73446 = CARTESIAN_POINT('',(0.5,-0.34,6.E-02)); +#73447 = DIRECTION('',(1.,0.,-0.)); +#73448 = DIRECTION('',(0.,0.,1.)); +#73449 = ORIENTED_EDGE('',*,*,#73450,.F.); +#73450 = EDGE_CURVE('',#73357,#73442,#73451,.T.); +#73451 = LINE('',#73452,#73453); +#73452 = CARTESIAN_POINT('',(-0.5,-0.37,6.E-02)); +#73453 = VECTOR('',#73454,1.); +#73454 = DIRECTION('',(1.,0.,0.)); +#73455 = CYLINDRICAL_SURFACE('',#73456,3.E-02); +#73456 = AXIS2_PLACEMENT_3D('',#73457,#73458,#73459); +#73457 = CARTESIAN_POINT('',(-0.5,-0.34,6.E-02)); +#73458 = DIRECTION('',(1.,0.,0.)); +#73459 = DIRECTION('',(0.,-1.,0.)); +#73460 = ADVANCED_FACE('',(#73461),#73479,.F.); +#73461 = FACE_BOUND('',#73462,.F.); +#73462 = EDGE_LOOP('',(#73463,#73464,#73465,#73473)); +#73463 = ORIENTED_EDGE('',*,*,#73418,.F.); +#73464 = ORIENTED_EDGE('',*,*,#73433,.T.); +#73465 = ORIENTED_EDGE('',*,*,#73466,.T.); +#73466 = EDGE_CURVE('',#73434,#73467,#73469,.T.); +#73467 = VERTEX_POINT('',#73468); +#73468 = CARTESIAN_POINT('',(0.5,0.34,3.E-02)); +#73469 = LINE('',#73470,#73471); +#73470 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#73471 = VECTOR('',#73472,1.); +#73472 = DIRECTION('',(0.,1.,0.)); +#73473 = ORIENTED_EDGE('',*,*,#73474,.F.); +#73474 = EDGE_CURVE('',#73410,#73467,#73475,.T.); +#73475 = LINE('',#73476,#73477); +#73476 = CARTESIAN_POINT('',(-0.5,0.34,3.E-02)); +#73477 = VECTOR('',#73478,1.); +#73478 = DIRECTION('',(1.,0.,0.)); +#73479 = PLANE('',#73480); +#73480 = AXIS2_PLACEMENT_3D('',#73481,#73482,#73483); +#73481 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#73482 = DIRECTION('',(0.,0.,1.)); +#73483 = DIRECTION('',(1.,0.,-0.)); +#73484 = ADVANCED_FACE('',(#73485),#73504,.T.); +#73485 = FACE_BOUND('',#73486,.T.); +#73486 = EDGE_LOOP('',(#73487,#73495,#73502,#73503)); +#73487 = ORIENTED_EDGE('',*,*,#73488,.T.); +#73488 = EDGE_CURVE('',#73402,#73489,#73491,.T.); +#73489 = VERTEX_POINT('',#73490); +#73490 = CARTESIAN_POINT('',(0.5,0.37,6.E-02)); +#73491 = LINE('',#73492,#73493); +#73492 = CARTESIAN_POINT('',(-0.5,0.37,6.E-02)); +#73493 = VECTOR('',#73494,1.); +#73494 = DIRECTION('',(1.,0.,0.)); +#73495 = ORIENTED_EDGE('',*,*,#73496,.T.); +#73496 = EDGE_CURVE('',#73489,#73467,#73497,.T.); +#73497 = CIRCLE('',#73498,3.E-02); +#73498 = AXIS2_PLACEMENT_3D('',#73499,#73500,#73501); +#73499 = CARTESIAN_POINT('',(0.5,0.34,6.E-02)); +#73500 = DIRECTION('',(-1.,0.,0.)); +#73501 = DIRECTION('',(0.,0.,1.)); +#73502 = ORIENTED_EDGE('',*,*,#73474,.F.); +#73503 = ORIENTED_EDGE('',*,*,#73409,.F.); +#73504 = CYLINDRICAL_SURFACE('',#73505,3.E-02); +#73505 = AXIS2_PLACEMENT_3D('',#73506,#73507,#73508); +#73506 = CARTESIAN_POINT('',(-0.5,0.34,6.E-02)); +#73507 = DIRECTION('',(1.,0.,0.)); +#73508 = DIRECTION('',(-0.,1.,0.)); +#73509 = ADVANCED_FACE('',(#73510),#73528,.T.); +#73510 = FACE_BOUND('',#73511,.T.); +#73511 = EDGE_LOOP('',(#73512,#73520,#73521,#73522)); +#73512 = ORIENTED_EDGE('',*,*,#73513,.F.); +#73513 = EDGE_CURVE('',#73489,#73514,#73516,.T.); +#73514 = VERTEX_POINT('',#73515); +#73515 = CARTESIAN_POINT('',(0.5,0.37,0.74)); +#73516 = LINE('',#73517,#73518); +#73517 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#73518 = VECTOR('',#73519,1.); +#73519 = DIRECTION('',(0.,0.,1.)); +#73520 = ORIENTED_EDGE('',*,*,#73488,.F.); +#73521 = ORIENTED_EDGE('',*,*,#73401,.T.); +#73522 = ORIENTED_EDGE('',*,*,#73523,.T.); +#73523 = EDGE_CURVE('',#73393,#73514,#73524,.T.); +#73524 = LINE('',#73525,#73526); +#73525 = CARTESIAN_POINT('',(-0.5,0.37,0.74)); +#73526 = VECTOR('',#73527,1.); +#73527 = DIRECTION('',(1.,0.,0.)); +#73528 = PLANE('',#73529); +#73529 = AXIS2_PLACEMENT_3D('',#73530,#73531,#73532); +#73530 = CARTESIAN_POINT('',(-0.5,0.37,3.E-02)); +#73531 = DIRECTION('',(0.,1.,0.)); +#73532 = DIRECTION('',(0.,-0.,1.)); +#73533 = ADVANCED_FACE('',(#73534),#73553,.T.); +#73534 = FACE_BOUND('',#73535,.T.); +#73535 = EDGE_LOOP('',(#73536,#73537,#73545,#73552)); +#73536 = ORIENTED_EDGE('',*,*,#73392,.T.); +#73537 = ORIENTED_EDGE('',*,*,#73538,.T.); +#73538 = EDGE_CURVE('',#73385,#73539,#73541,.T.); +#73539 = VERTEX_POINT('',#73540); +#73540 = CARTESIAN_POINT('',(0.5,0.34,0.77)); +#73541 = LINE('',#73542,#73543); +#73542 = CARTESIAN_POINT('',(-0.5,0.34,0.77)); +#73543 = VECTOR('',#73544,1.); +#73544 = DIRECTION('',(1.,0.,0.)); +#73545 = ORIENTED_EDGE('',*,*,#73546,.F.); +#73546 = EDGE_CURVE('',#73514,#73539,#73547,.T.); +#73547 = CIRCLE('',#73548,3.E-02); +#73548 = AXIS2_PLACEMENT_3D('',#73549,#73550,#73551); +#73549 = CARTESIAN_POINT('',(0.5,0.34,0.74)); +#73550 = DIRECTION('',(1.,0.,-0.)); +#73551 = DIRECTION('',(0.,0.,1.)); +#73552 = ORIENTED_EDGE('',*,*,#73523,.F.); +#73553 = CYLINDRICAL_SURFACE('',#73554,3.E-02); +#73554 = AXIS2_PLACEMENT_3D('',#73555,#73556,#73557); +#73555 = CARTESIAN_POINT('',(-0.5,0.34,0.74)); +#73556 = DIRECTION('',(1.,0.,0.)); +#73557 = DIRECTION('',(-0.,1.,0.)); +#73558 = ADVANCED_FACE('',(#73559),#73577,.T.); +#73559 = FACE_BOUND('',#73560,.T.); +#73560 = EDGE_LOOP('',(#73561,#73562,#73570,#73576)); +#73561 = ORIENTED_EDGE('',*,*,#73384,.F.); +#73562 = ORIENTED_EDGE('',*,*,#73563,.T.); +#73563 = EDGE_CURVE('',#73376,#73564,#73566,.T.); +#73564 = VERTEX_POINT('',#73565); +#73565 = CARTESIAN_POINT('',(0.5,-0.34,0.77)); +#73566 = LINE('',#73567,#73568); +#73567 = CARTESIAN_POINT('',(-0.5,-0.34,0.77)); +#73568 = VECTOR('',#73569,1.); +#73569 = DIRECTION('',(1.,0.,0.)); +#73570 = ORIENTED_EDGE('',*,*,#73571,.T.); +#73571 = EDGE_CURVE('',#73564,#73539,#73572,.T.); +#73572 = LINE('',#73573,#73574); +#73573 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#73574 = VECTOR('',#73575,1.); +#73575 = DIRECTION('',(0.,1.,0.)); +#73576 = ORIENTED_EDGE('',*,*,#73538,.F.); +#73577 = PLANE('',#73578); +#73578 = AXIS2_PLACEMENT_3D('',#73579,#73580,#73581); +#73579 = CARTESIAN_POINT('',(-0.5,-0.37,0.77)); +#73580 = DIRECTION('',(0.,0.,1.)); +#73581 = DIRECTION('',(1.,0.,-0.)); +#73582 = ADVANCED_FACE('',(#73583),#73602,.T.); +#73583 = FACE_BOUND('',#73584,.T.); +#73584 = EDGE_LOOP('',(#73585,#73593,#73600,#73601)); +#73585 = ORIENTED_EDGE('',*,*,#73586,.T.); +#73586 = EDGE_CURVE('',#73368,#73587,#73589,.T.); +#73587 = VERTEX_POINT('',#73588); +#73588 = CARTESIAN_POINT('',(0.5,-0.37,0.74)); +#73589 = LINE('',#73590,#73591); +#73590 = CARTESIAN_POINT('',(-0.5,-0.37,0.74)); +#73591 = VECTOR('',#73592,1.); +#73592 = DIRECTION('',(1.,0.,0.)); +#73593 = ORIENTED_EDGE('',*,*,#73594,.T.); +#73594 = EDGE_CURVE('',#73587,#73564,#73595,.T.); +#73595 = CIRCLE('',#73596,3.E-02); +#73596 = AXIS2_PLACEMENT_3D('',#73597,#73598,#73599); +#73597 = CARTESIAN_POINT('',(0.5,-0.34,0.74)); +#73598 = DIRECTION('',(-1.,0.,0.)); +#73599 = DIRECTION('',(0.,0.,1.)); +#73600 = ORIENTED_EDGE('',*,*,#73563,.F.); +#73601 = ORIENTED_EDGE('',*,*,#73375,.F.); +#73602 = CYLINDRICAL_SURFACE('',#73603,3.E-02); +#73603 = AXIS2_PLACEMENT_3D('',#73604,#73605,#73606); +#73604 = CARTESIAN_POINT('',(-0.5,-0.34,0.74)); +#73605 = DIRECTION('',(1.,0.,0.)); +#73606 = DIRECTION('',(0.,-1.,0.)); +#73607 = ADVANCED_FACE('',(#73608),#73619,.F.); +#73608 = FACE_BOUND('',#73609,.F.); +#73609 = EDGE_LOOP('',(#73610,#73616,#73617,#73618)); +#73610 = ORIENTED_EDGE('',*,*,#73611,.F.); +#73611 = EDGE_CURVE('',#73442,#73587,#73612,.T.); +#73612 = LINE('',#73613,#73614); +#73613 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#73614 = VECTOR('',#73615,1.); +#73615 = DIRECTION('',(0.,0.,1.)); +#73616 = ORIENTED_EDGE('',*,*,#73450,.F.); +#73617 = ORIENTED_EDGE('',*,*,#73367,.T.); +#73618 = ORIENTED_EDGE('',*,*,#73586,.T.); +#73619 = PLANE('',#73620); +#73620 = AXIS2_PLACEMENT_3D('',#73621,#73622,#73623); +#73621 = CARTESIAN_POINT('',(-0.5,-0.37,3.E-02)); +#73622 = DIRECTION('',(0.,1.,0.)); +#73623 = DIRECTION('',(0.,-0.,1.)); +#73624 = ADVANCED_FACE('',(#73625,#73695),#73705,.F.); +#73625 = FACE_BOUND('',#73626,.F.); +#73626 = EDGE_LOOP('',(#73627,#73637,#73646,#73654,#73663,#73671,#73680, + #73688)); +#73627 = ORIENTED_EDGE('',*,*,#73628,.F.); +#73628 = EDGE_CURVE('',#73629,#73631,#73633,.T.); +#73629 = VERTEX_POINT('',#73630); +#73630 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#73631 = VERTEX_POINT('',#73632); +#73632 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#73633 = LINE('',#73634,#73635); +#73634 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#73635 = VECTOR('',#73636,1.); +#73636 = DIRECTION('',(0.,0.,1.)); +#73637 = ORIENTED_EDGE('',*,*,#73638,.T.); +#73638 = EDGE_CURVE('',#73629,#73639,#73641,.T.); +#73639 = VERTEX_POINT('',#73640); +#73640 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#73641 = CIRCLE('',#73642,3.E-02); +#73642 = AXIS2_PLACEMENT_3D('',#73643,#73644,#73645); +#73643 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#73644 = DIRECTION('',(1.,0.,-0.)); +#73645 = DIRECTION('',(0.,0.,1.)); +#73646 = ORIENTED_EDGE('',*,*,#73647,.T.); +#73647 = EDGE_CURVE('',#73639,#73648,#73650,.T.); +#73648 = VERTEX_POINT('',#73649); +#73649 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#73650 = LINE('',#73651,#73652); +#73651 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#73652 = VECTOR('',#73653,1.); +#73653 = DIRECTION('',(0.,1.,0.)); +#73654 = ORIENTED_EDGE('',*,*,#73655,.F.); +#73655 = EDGE_CURVE('',#73656,#73648,#73658,.T.); +#73656 = VERTEX_POINT('',#73657); +#73657 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#73658 = CIRCLE('',#73659,3.E-02); +#73659 = AXIS2_PLACEMENT_3D('',#73660,#73661,#73662); +#73660 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#73661 = DIRECTION('',(-1.,0.,0.)); +#73662 = DIRECTION('',(0.,0.,1.)); +#73663 = ORIENTED_EDGE('',*,*,#73664,.T.); +#73664 = EDGE_CURVE('',#73656,#73665,#73667,.T.); +#73665 = VERTEX_POINT('',#73666); +#73666 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#73667 = LINE('',#73668,#73669); +#73668 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#73669 = VECTOR('',#73670,1.); +#73670 = DIRECTION('',(0.,0.,1.)); +#73671 = ORIENTED_EDGE('',*,*,#73672,.T.); +#73672 = EDGE_CURVE('',#73665,#73673,#73675,.T.); +#73673 = VERTEX_POINT('',#73674); +#73674 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#73675 = CIRCLE('',#73676,3.E-02); +#73676 = AXIS2_PLACEMENT_3D('',#73677,#73678,#73679); +#73677 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#73678 = DIRECTION('',(1.,0.,-0.)); +#73679 = DIRECTION('',(0.,0.,1.)); +#73680 = ORIENTED_EDGE('',*,*,#73681,.F.); +#73681 = EDGE_CURVE('',#73682,#73673,#73684,.T.); +#73682 = VERTEX_POINT('',#73683); +#73683 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#73684 = LINE('',#73685,#73686); +#73685 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#73686 = VECTOR('',#73687,1.); +#73687 = DIRECTION('',(0.,1.,0.)); +#73688 = ORIENTED_EDGE('',*,*,#73689,.F.); +#73689 = EDGE_CURVE('',#73631,#73682,#73690,.T.); +#73690 = CIRCLE('',#73691,3.E-02); +#73691 = AXIS2_PLACEMENT_3D('',#73692,#73693,#73694); +#73692 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#73693 = DIRECTION('',(-1.,0.,0.)); +#73694 = DIRECTION('',(0.,0.,1.)); +#73695 = FACE_BOUND('',#73696,.F.); +#73696 = EDGE_LOOP('',(#73697,#73698,#73699,#73700,#73701,#73702,#73703, + #73704)); +#73697 = ORIENTED_EDGE('',*,*,#73441,.F.); +#73698 = ORIENTED_EDGE('',*,*,#73611,.T.); +#73699 = ORIENTED_EDGE('',*,*,#73594,.T.); +#73700 = ORIENTED_EDGE('',*,*,#73571,.T.); +#73701 = ORIENTED_EDGE('',*,*,#73546,.F.); +#73702 = ORIENTED_EDGE('',*,*,#73513,.F.); +#73703 = ORIENTED_EDGE('',*,*,#73496,.T.); +#73704 = ORIENTED_EDGE('',*,*,#73466,.F.); +#73705 = PLANE('',#73706); +#73706 = AXIS2_PLACEMENT_3D('',#73707,#73708,#73709); +#73707 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#73708 = DIRECTION('',(1.,0.,0.)); +#73709 = DIRECTION('',(0.,0.,1.)); +#73710 = ADVANCED_FACE('',(#73711),#73736,.F.); +#73711 = FACE_BOUND('',#73712,.F.); +#73712 = EDGE_LOOP('',(#73713,#73723,#73729,#73730)); +#73713 = ORIENTED_EDGE('',*,*,#73714,.F.); +#73714 = EDGE_CURVE('',#73715,#73717,#73719,.T.); +#73715 = VERTEX_POINT('',#73716); +#73716 = CARTESIAN_POINT('',(0.8,-0.4,3.E-02)); +#73717 = VERTEX_POINT('',#73718); +#73718 = CARTESIAN_POINT('',(0.8,-0.4,0.77)); +#73719 = LINE('',#73720,#73721); +#73720 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#73721 = VECTOR('',#73722,1.); +#73722 = DIRECTION('',(0.,0.,1.)); +#73723 = ORIENTED_EDGE('',*,*,#73724,.F.); +#73724 = EDGE_CURVE('',#73629,#73715,#73725,.T.); +#73725 = LINE('',#73726,#73727); +#73726 = CARTESIAN_POINT('',(0.5,-0.4,3.E-02)); +#73727 = VECTOR('',#73728,1.); +#73728 = DIRECTION('',(1.,0.,0.)); +#73729 = ORIENTED_EDGE('',*,*,#73628,.T.); +#73730 = ORIENTED_EDGE('',*,*,#73731,.T.); +#73731 = EDGE_CURVE('',#73631,#73717,#73732,.T.); +#73732 = LINE('',#73733,#73734); +#73733 = CARTESIAN_POINT('',(0.5,-0.4,0.77)); +#73734 = VECTOR('',#73735,1.); +#73735 = DIRECTION('',(1.,0.,0.)); +#73736 = PLANE('',#73737); +#73737 = AXIS2_PLACEMENT_3D('',#73738,#73739,#73740); +#73738 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#73739 = DIRECTION('',(0.,1.,0.)); +#73740 = DIRECTION('',(0.,-0.,1.)); +#73741 = ADVANCED_FACE('',(#73742),#73761,.T.); +#73742 = FACE_BOUND('',#73743,.T.); +#73743 = EDGE_LOOP('',(#73744,#73745,#73753,#73760)); +#73744 = ORIENTED_EDGE('',*,*,#73638,.T.); +#73745 = ORIENTED_EDGE('',*,*,#73746,.T.); +#73746 = EDGE_CURVE('',#73639,#73747,#73749,.T.); +#73747 = VERTEX_POINT('',#73748); +#73748 = CARTESIAN_POINT('',(0.8,-0.37,0.)); +#73749 = LINE('',#73750,#73751); +#73750 = CARTESIAN_POINT('',(0.5,-0.37,0.)); +#73751 = VECTOR('',#73752,1.); +#73752 = DIRECTION('',(1.,0.,0.)); +#73753 = ORIENTED_EDGE('',*,*,#73754,.F.); +#73754 = EDGE_CURVE('',#73715,#73747,#73755,.T.); +#73755 = CIRCLE('',#73756,3.E-02); +#73756 = AXIS2_PLACEMENT_3D('',#73757,#73758,#73759); +#73757 = CARTESIAN_POINT('',(0.8,-0.37,3.E-02)); +#73758 = DIRECTION('',(1.,0.,-0.)); +#73759 = DIRECTION('',(0.,0.,1.)); +#73760 = ORIENTED_EDGE('',*,*,#73724,.F.); +#73761 = CYLINDRICAL_SURFACE('',#73762,3.E-02); +#73762 = AXIS2_PLACEMENT_3D('',#73763,#73764,#73765); +#73763 = CARTESIAN_POINT('',(0.5,-0.37,3.E-02)); +#73764 = DIRECTION('',(1.,0.,0.)); +#73765 = DIRECTION('',(0.,-1.,0.)); +#73766 = ADVANCED_FACE('',(#73767),#73786,.T.); +#73767 = FACE_BOUND('',#73768,.T.); +#73768 = EDGE_LOOP('',(#73769,#73770,#73779,#73785)); +#73769 = ORIENTED_EDGE('',*,*,#73731,.T.); +#73770 = ORIENTED_EDGE('',*,*,#73771,.T.); +#73771 = EDGE_CURVE('',#73717,#73772,#73774,.T.); +#73772 = VERTEX_POINT('',#73773); +#73773 = CARTESIAN_POINT('',(0.8,-0.37,0.8)); +#73774 = CIRCLE('',#73775,3.E-02); +#73775 = AXIS2_PLACEMENT_3D('',#73776,#73777,#73778); +#73776 = CARTESIAN_POINT('',(0.8,-0.37,0.77)); +#73777 = DIRECTION('',(-1.,0.,0.)); +#73778 = DIRECTION('',(0.,0.,1.)); +#73779 = ORIENTED_EDGE('',*,*,#73780,.F.); +#73780 = EDGE_CURVE('',#73682,#73772,#73781,.T.); +#73781 = LINE('',#73782,#73783); +#73782 = CARTESIAN_POINT('',(0.5,-0.37,0.8)); +#73783 = VECTOR('',#73784,1.); +#73784 = DIRECTION('',(1.,0.,0.)); +#73785 = ORIENTED_EDGE('',*,*,#73689,.F.); +#73786 = CYLINDRICAL_SURFACE('',#73787,3.E-02); +#73787 = AXIS2_PLACEMENT_3D('',#73788,#73789,#73790); +#73788 = CARTESIAN_POINT('',(0.5,-0.37,0.77)); +#73789 = DIRECTION('',(1.,0.,0.)); +#73790 = DIRECTION('',(0.,-1.,0.)); +#73791 = ADVANCED_FACE('',(#73792),#73810,.F.); +#73792 = FACE_BOUND('',#73793,.F.); +#73793 = EDGE_LOOP('',(#73794,#73795,#73796,#73804)); +#73794 = ORIENTED_EDGE('',*,*,#73647,.F.); +#73795 = ORIENTED_EDGE('',*,*,#73746,.T.); +#73796 = ORIENTED_EDGE('',*,*,#73797,.T.); +#73797 = EDGE_CURVE('',#73747,#73798,#73800,.T.); +#73798 = VERTEX_POINT('',#73799); +#73799 = CARTESIAN_POINT('',(0.8,0.37,0.)); +#73800 = LINE('',#73801,#73802); +#73801 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#73802 = VECTOR('',#73803,1.); +#73803 = DIRECTION('',(0.,1.,0.)); +#73804 = ORIENTED_EDGE('',*,*,#73805,.F.); +#73805 = EDGE_CURVE('',#73648,#73798,#73806,.T.); +#73806 = LINE('',#73807,#73808); +#73807 = CARTESIAN_POINT('',(0.5,0.37,0.)); +#73808 = VECTOR('',#73809,1.); +#73809 = DIRECTION('',(1.,0.,0.)); +#73810 = PLANE('',#73811); +#73811 = AXIS2_PLACEMENT_3D('',#73812,#73813,#73814); +#73812 = CARTESIAN_POINT('',(0.5,-0.4,0.)); +#73813 = DIRECTION('',(0.,0.,1.)); +#73814 = DIRECTION('',(1.,0.,-0.)); +#73815 = ADVANCED_FACE('',(#73816),#73834,.T.); +#73816 = FACE_BOUND('',#73817,.T.); +#73817 = EDGE_LOOP('',(#73818,#73819,#73820,#73828)); +#73818 = ORIENTED_EDGE('',*,*,#73681,.F.); +#73819 = ORIENTED_EDGE('',*,*,#73780,.T.); +#73820 = ORIENTED_EDGE('',*,*,#73821,.T.); +#73821 = EDGE_CURVE('',#73772,#73822,#73824,.T.); +#73822 = VERTEX_POINT('',#73823); +#73823 = CARTESIAN_POINT('',(0.8,0.37,0.8)); +#73824 = LINE('',#73825,#73826); +#73825 = CARTESIAN_POINT('',(0.8,-0.4,0.8)); +#73826 = VECTOR('',#73827,1.); +#73827 = DIRECTION('',(0.,1.,0.)); +#73828 = ORIENTED_EDGE('',*,*,#73829,.F.); +#73829 = EDGE_CURVE('',#73673,#73822,#73830,.T.); +#73830 = LINE('',#73831,#73832); +#73831 = CARTESIAN_POINT('',(0.5,0.37,0.8)); +#73832 = VECTOR('',#73833,1.); +#73833 = DIRECTION('',(1.,0.,0.)); +#73834 = PLANE('',#73835); +#73835 = AXIS2_PLACEMENT_3D('',#73836,#73837,#73838); +#73836 = CARTESIAN_POINT('',(0.5,-0.4,0.8)); +#73837 = DIRECTION('',(0.,0.,1.)); +#73838 = DIRECTION('',(1.,0.,-0.)); +#73839 = ADVANCED_FACE('',(#73840),#73859,.T.); +#73840 = FACE_BOUND('',#73841,.T.); +#73841 = EDGE_LOOP('',(#73842,#73850,#73857,#73858)); +#73842 = ORIENTED_EDGE('',*,*,#73843,.T.); +#73843 = EDGE_CURVE('',#73656,#73844,#73846,.T.); +#73844 = VERTEX_POINT('',#73845); +#73845 = CARTESIAN_POINT('',(0.8,0.4,3.E-02)); +#73846 = LINE('',#73847,#73848); +#73847 = CARTESIAN_POINT('',(0.5,0.4,3.E-02)); +#73848 = VECTOR('',#73849,1.); +#73849 = DIRECTION('',(1.,0.,0.)); +#73850 = ORIENTED_EDGE('',*,*,#73851,.T.); +#73851 = EDGE_CURVE('',#73844,#73798,#73852,.T.); +#73852 = CIRCLE('',#73853,3.E-02); +#73853 = AXIS2_PLACEMENT_3D('',#73854,#73855,#73856); +#73854 = CARTESIAN_POINT('',(0.8,0.37,3.E-02)); +#73855 = DIRECTION('',(-1.,0.,0.)); +#73856 = DIRECTION('',(0.,0.,1.)); +#73857 = ORIENTED_EDGE('',*,*,#73805,.F.); +#73858 = ORIENTED_EDGE('',*,*,#73655,.F.); +#73859 = CYLINDRICAL_SURFACE('',#73860,3.E-02); +#73860 = AXIS2_PLACEMENT_3D('',#73861,#73862,#73863); +#73861 = CARTESIAN_POINT('',(0.5,0.37,3.E-02)); +#73862 = DIRECTION('',(1.,0.,0.)); +#73863 = DIRECTION('',(-0.,1.,0.)); +#73864 = ADVANCED_FACE('',(#73865),#73884,.T.); +#73865 = FACE_BOUND('',#73866,.T.); +#73866 = EDGE_LOOP('',(#73867,#73868,#73869,#73878)); +#73867 = ORIENTED_EDGE('',*,*,#73672,.T.); +#73868 = ORIENTED_EDGE('',*,*,#73829,.T.); +#73869 = ORIENTED_EDGE('',*,*,#73870,.F.); +#73870 = EDGE_CURVE('',#73871,#73822,#73873,.T.); +#73871 = VERTEX_POINT('',#73872); +#73872 = CARTESIAN_POINT('',(0.8,0.4,0.77)); +#73873 = CIRCLE('',#73874,3.E-02); +#73874 = AXIS2_PLACEMENT_3D('',#73875,#73876,#73877); +#73875 = CARTESIAN_POINT('',(0.8,0.37,0.77)); +#73876 = DIRECTION('',(1.,0.,-0.)); +#73877 = DIRECTION('',(0.,0.,1.)); +#73878 = ORIENTED_EDGE('',*,*,#73879,.F.); +#73879 = EDGE_CURVE('',#73665,#73871,#73880,.T.); +#73880 = LINE('',#73881,#73882); +#73881 = CARTESIAN_POINT('',(0.5,0.4,0.77)); +#73882 = VECTOR('',#73883,1.); +#73883 = DIRECTION('',(1.,0.,0.)); +#73884 = CYLINDRICAL_SURFACE('',#73885,3.E-02); +#73885 = AXIS2_PLACEMENT_3D('',#73886,#73887,#73888); +#73886 = CARTESIAN_POINT('',(0.5,0.37,0.77)); +#73887 = DIRECTION('',(1.,0.,0.)); +#73888 = DIRECTION('',(-0.,1.,0.)); +#73889 = ADVANCED_FACE('',(#73890),#73901,.T.); +#73890 = FACE_BOUND('',#73891,.T.); +#73891 = EDGE_LOOP('',(#73892,#73898,#73899,#73900)); +#73892 = ORIENTED_EDGE('',*,*,#73893,.F.); +#73893 = EDGE_CURVE('',#73844,#73871,#73894,.T.); +#73894 = LINE('',#73895,#73896); +#73895 = CARTESIAN_POINT('',(0.8,0.4,0.)); +#73896 = VECTOR('',#73897,1.); +#73897 = DIRECTION('',(0.,0.,1.)); +#73898 = ORIENTED_EDGE('',*,*,#73843,.F.); +#73899 = ORIENTED_EDGE('',*,*,#73664,.T.); +#73900 = ORIENTED_EDGE('',*,*,#73879,.T.); +#73901 = PLANE('',#73902); +#73902 = AXIS2_PLACEMENT_3D('',#73903,#73904,#73905); +#73903 = CARTESIAN_POINT('',(0.5,0.4,0.)); +#73904 = DIRECTION('',(0.,1.,0.)); +#73905 = DIRECTION('',(0.,-0.,1.)); +#73906 = ADVANCED_FACE('',(#73907),#73917,.T.); +#73907 = FACE_BOUND('',#73908,.T.); +#73908 = EDGE_LOOP('',(#73909,#73910,#73911,#73912,#73913,#73914,#73915, + #73916)); +#73909 = ORIENTED_EDGE('',*,*,#73714,.F.); +#73910 = ORIENTED_EDGE('',*,*,#73754,.T.); +#73911 = ORIENTED_EDGE('',*,*,#73797,.T.); +#73912 = ORIENTED_EDGE('',*,*,#73851,.F.); +#73913 = ORIENTED_EDGE('',*,*,#73893,.T.); +#73914 = ORIENTED_EDGE('',*,*,#73870,.T.); +#73915 = ORIENTED_EDGE('',*,*,#73821,.F.); +#73916 = ORIENTED_EDGE('',*,*,#73771,.F.); +#73917 = PLANE('',#73918); +#73918 = AXIS2_PLACEMENT_3D('',#73919,#73920,#73921); +#73919 = CARTESIAN_POINT('',(0.8,-0.4,0.)); +#73920 = DIRECTION('',(1.,0.,0.)); +#73921 = DIRECTION('',(0.,0.,1.)); +#73922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#73926)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#73923,#73924,#73925)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#73923 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#73924 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#73925 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#73926 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#73923, + 'distance_accuracy_value','confusion accuracy'); +#73927 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73928,#73930); +#73928 = ( REPRESENTATION_RELATIONSHIP('','',#73067,#73044) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73929) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73929 = ITEM_DEFINED_TRANSFORMATION('','',#11,#73045); +#73930 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73931); +#73931 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','=>[0:1:1:24]','',#73039, + #73062,$); +#73932 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#73064)); +#73933 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73934,#73936); +#73934 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73935) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73935 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#73936 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73937); +#73937 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','C_OLED_2','',#5,#32437,$); +#73938 = SHAPE_DEFINITION_REPRESENTATION(#73939,#73945); +#73939 = PRODUCT_DEFINITION_SHAPE('','',#73940); +#73940 = PRODUCT_DEFINITION('design','',#73941,#73944); +#73941 = PRODUCT_DEFINITION_FORMATION('','',#73942); +#73942 = PRODUCT('SW_SPST_EVQP2_ShortPushTravel_H2.1mm', + 'SW_SPST_EVQP2_ShortPushTravel_H2.1mm','',(#73943)); +#73943 = PRODUCT_CONTEXT('',#2,'mechanical'); +#73944 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#73945 = SHAPE_REPRESENTATION('',(#11,#73946),#73950); +#73946 = AXIS2_PLACEMENT_3D('',#73947,#73948,#73949); +#73947 = CARTESIAN_POINT('',(0.,0.,0.)); +#73948 = DIRECTION('',(0.,0.,1.)); +#73949 = DIRECTION('',(1.,0.,-0.)); +#73950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#73954)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#73951,#73952,#73953)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#73951 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#73952 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#73953 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#73954 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#73951, + 'distance_accuracy_value','confusion accuracy'); +#73955 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#73956,#73958); +#73956 = ( REPRESENTATION_RELATIONSHIP('','',#73945,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#73957) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#73957 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#73958 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #73959); +#73959 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','SW_BOOT1','',#5,#73940,$); +#73960 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#73942)); +#73961 = SHAPE_DEFINITION_REPRESENTATION(#73962,#73968); +#73962 = PRODUCT_DEFINITION_SHAPE('','',#73963); +#73963 = PRODUCT_DEFINITION('design','',#73964,#73967); +#73964 = PRODUCT_DEFINITION_FORMATION('','',#73965); +#73965 = PRODUCT('SW_SPST_EVQP2_ShortPushTravel_H2.1mm', + 'SW_SPST_EVQP2_ShortPushTravel_H2.1mm','',(#73966)); +#73966 = PRODUCT_CONTEXT('',#2,'mechanical'); +#73967 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#73968 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#73969),#79357); +#73969 = MANIFOLD_SOLID_BREP('',#73970); +#73970 = CLOSED_SHELL('',(#73971,#74020,#74179,#74203,#74227,#74252, + #74514,#74531,#74548,#74565,#74598,#74622,#74694,#74718,#74783, + #74800,#74817,#74834,#74932,#74944,#74985,#75009,#75043,#75084, + #75108,#75142,#75159,#75183,#75263,#75294,#75325,#75349,#75380, + #75404,#75491,#75515,#75539,#75563,#75582,#75607,#75624,#75641, + #75658,#75803,#75827,#75906,#75930,#75949,#75980,#76005,#76022, + #76056,#76081,#76121,#76145,#76162,#76174,#76191,#76203,#76236, + #76260,#76284,#76308,#76332,#76356,#76373,#76391,#76409,#76434, + #76445,#76456,#76490,#76514,#76538,#76562,#76586,#76610,#76634, + #76652,#76685,#76922,#76939,#76956,#76973,#76990,#77007,#77024, + #77037,#77054,#77071,#77083,#77100,#77148,#77165,#77416,#77433, + #77457,#77523,#77564,#77588,#77622,#77663,#77687,#77721,#77738, + #77811,#77842,#77873,#77897,#77928,#77952,#77971,#77990,#78007, + #78024,#78041,#78058,#78075,#78092,#78111,#78129,#78147,#78164, + #78181,#78198,#78215,#78227,#78259,#78283,#78308,#78332,#78357, + #78381,#78406,#78430,#78455,#78479,#78504,#78521,#78538,#78550, + #78567,#78579,#78597,#78615,#78626,#78637,#78761,#78792,#78817, + #78841,#78866,#78890,#78915,#78939,#78964,#78988,#79013,#79037, + #79055,#79092,#79122,#79147,#79164,#79189,#79206,#79235,#79265, + #79290,#79307,#79330,#79341)); +#73971 = ADVANCED_FACE('',(#73972),#74015,.F.); +#73972 = FACE_BOUND('',#73973,.F.); +#73973 = EDGE_LOOP('',(#73974,#73984,#73992,#74001,#74009)); +#73974 = ORIENTED_EDGE('',*,*,#73975,.F.); +#73975 = EDGE_CURVE('',#73976,#73978,#73980,.T.); +#73976 = VERTEX_POINT('',#73977); +#73977 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#73978 = VERTEX_POINT('',#73979); +#73979 = CARTESIAN_POINT('',(-1.325,-1.6,0.)); +#73980 = LINE('',#73981,#73982); +#73981 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#73982 = VECTOR('',#73983,1.); +#73983 = DIRECTION('',(1.,0.,0.)); +#73984 = ORIENTED_EDGE('',*,*,#73985,.T.); +#73985 = EDGE_CURVE('',#73976,#73986,#73988,.T.); +#73986 = VERTEX_POINT('',#73987); +#73987 = CARTESIAN_POINT('',(-2.35,-1.6,0.55)); +#73988 = LINE('',#73989,#73990); +#73989 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#73990 = VECTOR('',#73991,1.); +#73991 = DIRECTION('',(0.,0.,1.)); +#73992 = ORIENTED_EDGE('',*,*,#73993,.T.); +#73993 = EDGE_CURVE('',#73986,#73994,#73996,.T.); +#73994 = VERTEX_POINT('',#73995); +#73995 = CARTESIAN_POINT('',(-2.25,-1.6,0.45)); +#73996 = CIRCLE('',#73997,0.1); +#73997 = AXIS2_PLACEMENT_3D('',#73998,#73999,#74000); +#73998 = CARTESIAN_POINT('',(-2.25,-1.6,0.55)); +#73999 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74000 = DIRECTION('',(0.,0.,1.)); +#74001 = ORIENTED_EDGE('',*,*,#74002,.T.); +#74002 = EDGE_CURVE('',#73994,#74003,#74005,.T.); +#74003 = VERTEX_POINT('',#74004); +#74004 = CARTESIAN_POINT('',(-1.325,-1.6,0.45)); +#74005 = LINE('',#74006,#74007); +#74006 = CARTESIAN_POINT('',(-2.35,-1.6,0.45)); +#74007 = VECTOR('',#74008,1.); +#74008 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#74009 = ORIENTED_EDGE('',*,*,#74010,.F.); +#74010 = EDGE_CURVE('',#73978,#74003,#74011,.T.); +#74011 = LINE('',#74012,#74013); +#74012 = CARTESIAN_POINT('',(-1.325,-1.6,0.)); +#74013 = VECTOR('',#74014,1.); +#74014 = DIRECTION('',(0.,0.,1.)); +#74015 = PLANE('',#74016); +#74016 = AXIS2_PLACEMENT_3D('',#74017,#74018,#74019); +#74017 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#74018 = DIRECTION('',(0.,1.,0.)); +#74019 = DIRECTION('',(1.,0.,0.)); +#74020 = ADVANCED_FACE('',(#74021),#74174,.F.); +#74021 = FACE_BOUND('',#74022,.F.); +#74022 = EDGE_LOOP('',(#74023,#74033,#74041,#74049,#74057,#74065,#74073, + #74081,#74087,#74088,#74096,#74104,#74112,#74120,#74128,#74136, + #74144,#74152,#74160,#74168)); +#74023 = ORIENTED_EDGE('',*,*,#74024,.F.); +#74024 = EDGE_CURVE('',#74025,#74027,#74029,.T.); +#74025 = VERTEX_POINT('',#74026); +#74026 = CARTESIAN_POINT('',(-2.35,0.55,0.)); +#74027 = VERTEX_POINT('',#74028); +#74028 = CARTESIAN_POINT('',(-2.242963248302,0.55,5.551115123126E-17)); +#74029 = LINE('',#74030,#74031); +#74030 = CARTESIAN_POINT('',(-2.75,0.55,0.)); +#74031 = VECTOR('',#74032,1.); +#74032 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74033 = ORIENTED_EDGE('',*,*,#74034,.T.); +#74034 = EDGE_CURVE('',#74025,#74035,#74037,.T.); +#74035 = VERTEX_POINT('',#74036); +#74036 = CARTESIAN_POINT('',(-2.35,-0.55,0.)); +#74037 = LINE('',#74038,#74039); +#74038 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74039 = VECTOR('',#74040,1.); +#74040 = DIRECTION('',(0.,-1.,0.)); +#74041 = ORIENTED_EDGE('',*,*,#74042,.F.); +#74042 = EDGE_CURVE('',#74043,#74035,#74045,.T.); +#74043 = VERTEX_POINT('',#74044); +#74044 = CARTESIAN_POINT('',(-2.242963248302,-0.55,5.551115123126E-17)); +#74045 = LINE('',#74046,#74047); +#74046 = CARTESIAN_POINT('',(-1.85,-0.55,0.)); +#74047 = VECTOR('',#74048,1.); +#74048 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74049 = ORIENTED_EDGE('',*,*,#74050,.F.); +#74050 = EDGE_CURVE('',#74051,#74043,#74053,.T.); +#74051 = VERTEX_POINT('',#74052); +#74052 = CARTESIAN_POINT('',(-1.85,-0.55,0.)); +#74053 = LINE('',#74054,#74055); +#74054 = CARTESIAN_POINT('',(-1.85,-0.55,0.)); +#74055 = VECTOR('',#74056,1.); +#74056 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74057 = ORIENTED_EDGE('',*,*,#74058,.F.); +#74058 = EDGE_CURVE('',#74059,#74051,#74061,.T.); +#74059 = VERTEX_POINT('',#74060); +#74060 = CARTESIAN_POINT('',(-1.85,-1.15,0.)); +#74061 = LINE('',#74062,#74063); +#74062 = CARTESIAN_POINT('',(-1.85,-1.15,0.)); +#74063 = VECTOR('',#74064,1.); +#74064 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#74065 = ORIENTED_EDGE('',*,*,#74066,.F.); +#74066 = EDGE_CURVE('',#74067,#74059,#74069,.T.); +#74067 = VERTEX_POINT('',#74068); +#74068 = CARTESIAN_POINT('',(-2.242963248302,-1.15,5.551115123126E-17)); +#74069 = LINE('',#74070,#74071); +#74070 = CARTESIAN_POINT('',(-2.75,-1.15,0.)); +#74071 = VECTOR('',#74072,1.); +#74072 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74073 = ORIENTED_EDGE('',*,*,#74074,.F.); +#74074 = EDGE_CURVE('',#74075,#74067,#74077,.T.); +#74075 = VERTEX_POINT('',#74076); +#74076 = CARTESIAN_POINT('',(-2.35,-1.15,0.)); +#74077 = LINE('',#74078,#74079); +#74078 = CARTESIAN_POINT('',(-2.75,-1.15,0.)); +#74079 = VECTOR('',#74080,1.); +#74080 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74081 = ORIENTED_EDGE('',*,*,#74082,.T.); +#74082 = EDGE_CURVE('',#74075,#73976,#74083,.T.); +#74083 = LINE('',#74084,#74085); +#74084 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74085 = VECTOR('',#74086,1.); +#74086 = DIRECTION('',(0.,-1.,0.)); +#74087 = ORIENTED_EDGE('',*,*,#73975,.T.); +#74088 = ORIENTED_EDGE('',*,*,#74089,.F.); +#74089 = EDGE_CURVE('',#74090,#73978,#74092,.T.); +#74090 = VERTEX_POINT('',#74091); +#74091 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74092 = LINE('',#74093,#74094); +#74093 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74094 = VECTOR('',#74095,1.); +#74095 = DIRECTION('',(0.,1.,0.)); +#74096 = ORIENTED_EDGE('',*,*,#74097,.T.); +#74097 = EDGE_CURVE('',#74090,#74098,#74100,.T.); +#74098 = VERTEX_POINT('',#74099); +#74099 = CARTESIAN_POINT('',(-0.5,-1.75,0.)); +#74100 = LINE('',#74101,#74102); +#74101 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74102 = VECTOR('',#74103,1.); +#74103 = DIRECTION('',(1.,0.,0.)); +#74104 = ORIENTED_EDGE('',*,*,#74105,.T.); +#74105 = EDGE_CURVE('',#74098,#74106,#74108,.T.); +#74106 = VERTEX_POINT('',#74107); +#74107 = CARTESIAN_POINT('',(-0.5,1.75,0.)); +#74108 = LINE('',#74109,#74110); +#74109 = CARTESIAN_POINT('',(-0.5,-1.75,0.)); +#74110 = VECTOR('',#74111,1.); +#74111 = DIRECTION('',(0.,1.,0.)); +#74112 = ORIENTED_EDGE('',*,*,#74113,.F.); +#74113 = EDGE_CURVE('',#74114,#74106,#74116,.T.); +#74114 = VERTEX_POINT('',#74115); +#74115 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74116 = LINE('',#74117,#74118); +#74117 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74118 = VECTOR('',#74119,1.); +#74119 = DIRECTION('',(1.,0.,0.)); +#74120 = ORIENTED_EDGE('',*,*,#74121,.F.); +#74121 = EDGE_CURVE('',#74122,#74114,#74124,.T.); +#74122 = VERTEX_POINT('',#74123); +#74123 = CARTESIAN_POINT('',(-1.325,1.6,0.)); +#74124 = LINE('',#74125,#74126); +#74125 = CARTESIAN_POINT('',(-1.325,1.6,0.)); +#74126 = VECTOR('',#74127,1.); +#74127 = DIRECTION('',(0.,1.,0.)); +#74128 = ORIENTED_EDGE('',*,*,#74129,.T.); +#74129 = EDGE_CURVE('',#74122,#74130,#74132,.T.); +#74130 = VERTEX_POINT('',#74131); +#74131 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74132 = LINE('',#74133,#74134); +#74133 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#74134 = VECTOR('',#74135,1.); +#74135 = DIRECTION('',(-1.,0.,0.)); +#74136 = ORIENTED_EDGE('',*,*,#74137,.T.); +#74137 = EDGE_CURVE('',#74130,#74138,#74140,.T.); +#74138 = VERTEX_POINT('',#74139); +#74139 = CARTESIAN_POINT('',(-2.35,1.15,0.)); +#74140 = LINE('',#74141,#74142); +#74141 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74142 = VECTOR('',#74143,1.); +#74143 = DIRECTION('',(0.,-1.,0.)); +#74144 = ORIENTED_EDGE('',*,*,#74145,.F.); +#74145 = EDGE_CURVE('',#74146,#74138,#74148,.T.); +#74146 = VERTEX_POINT('',#74147); +#74147 = CARTESIAN_POINT('',(-2.242963248302,1.15,5.551115123126E-17)); +#74148 = LINE('',#74149,#74150); +#74149 = CARTESIAN_POINT('',(-1.85,1.15,0.)); +#74150 = VECTOR('',#74151,1.); +#74151 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74152 = ORIENTED_EDGE('',*,*,#74153,.F.); +#74153 = EDGE_CURVE('',#74154,#74146,#74156,.T.); +#74154 = VERTEX_POINT('',#74155); +#74155 = CARTESIAN_POINT('',(-1.85,1.15,0.)); +#74156 = LINE('',#74157,#74158); +#74157 = CARTESIAN_POINT('',(-1.85,1.15,0.)); +#74158 = VECTOR('',#74159,1.); +#74159 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74160 = ORIENTED_EDGE('',*,*,#74161,.F.); +#74161 = EDGE_CURVE('',#74162,#74154,#74164,.T.); +#74162 = VERTEX_POINT('',#74163); +#74163 = CARTESIAN_POINT('',(-1.85,0.55,0.)); +#74164 = LINE('',#74165,#74166); +#74165 = CARTESIAN_POINT('',(-1.85,0.55,0.)); +#74166 = VECTOR('',#74167,1.); +#74167 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#74168 = ORIENTED_EDGE('',*,*,#74169,.F.); +#74169 = EDGE_CURVE('',#74027,#74162,#74170,.T.); +#74170 = LINE('',#74171,#74172); +#74171 = CARTESIAN_POINT('',(-2.75,0.55,0.)); +#74172 = VECTOR('',#74173,1.); +#74173 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74174 = PLANE('',#74175); +#74175 = AXIS2_PLACEMENT_3D('',#74176,#74177,#74178); +#74176 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,0.) + ); +#74177 = DIRECTION('',(0.,0.,1.)); +#74178 = DIRECTION('',(1.,0.,-0.)); +#74179 = ADVANCED_FACE('',(#74180),#74198,.F.); +#74180 = FACE_BOUND('',#74181,.F.); +#74181 = EDGE_LOOP('',(#74182,#74190,#74191,#74192)); +#74182 = ORIENTED_EDGE('',*,*,#74183,.F.); +#74183 = EDGE_CURVE('',#74090,#74184,#74186,.T.); +#74184 = VERTEX_POINT('',#74185); +#74185 = CARTESIAN_POINT('',(-1.325,-1.75,0.45)); +#74186 = LINE('',#74187,#74188); +#74187 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74188 = VECTOR('',#74189,1.); +#74189 = DIRECTION('',(0.,0.,1.)); +#74190 = ORIENTED_EDGE('',*,*,#74089,.T.); +#74191 = ORIENTED_EDGE('',*,*,#74010,.T.); +#74192 = ORIENTED_EDGE('',*,*,#74193,.T.); +#74193 = EDGE_CURVE('',#74003,#74184,#74194,.T.); +#74194 = LINE('',#74195,#74196); +#74195 = CARTESIAN_POINT('',(-1.325,-1.6,0.45)); +#74196 = VECTOR('',#74197,1.); +#74197 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74198 = PLANE('',#74199); +#74199 = AXIS2_PLACEMENT_3D('',#74200,#74201,#74202); +#74200 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74201 = DIRECTION('',(1.,0.,0.)); +#74202 = DIRECTION('',(0.,0.,1.)); +#74203 = ADVANCED_FACE('',(#74204),#74222,.T.); +#74204 = FACE_BOUND('',#74205,.F.); +#74205 = EDGE_LOOP('',(#74206,#74207,#74215,#74221)); +#74206 = ORIENTED_EDGE('',*,*,#74002,.F.); +#74207 = ORIENTED_EDGE('',*,*,#74208,.T.); +#74208 = EDGE_CURVE('',#73994,#74209,#74211,.T.); +#74209 = VERTEX_POINT('',#74210); +#74210 = CARTESIAN_POINT('',(-2.25,-1.75,0.45)); +#74211 = LINE('',#74212,#74213); +#74212 = CARTESIAN_POINT('',(-2.25,-1.6,0.45)); +#74213 = VECTOR('',#74214,1.); +#74214 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74215 = ORIENTED_EDGE('',*,*,#74216,.T.); +#74216 = EDGE_CURVE('',#74209,#74184,#74217,.T.); +#74217 = LINE('',#74218,#74219); +#74218 = CARTESIAN_POINT('',(-2.35,-1.75,0.45)); +#74219 = VECTOR('',#74220,1.); +#74220 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#74221 = ORIENTED_EDGE('',*,*,#74193,.F.); +#74222 = PLANE('',#74223); +#74223 = AXIS2_PLACEMENT_3D('',#74224,#74225,#74226); +#74224 = CARTESIAN_POINT('',(-2.35,-1.6,0.45)); +#74225 = DIRECTION('',(0.,0.,-1.)); +#74226 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74227 = ADVANCED_FACE('',(#74228),#74247,.T.); +#74228 = FACE_BOUND('',#74229,.T.); +#74229 = EDGE_LOOP('',(#74230,#74231,#74232,#74241)); +#74230 = ORIENTED_EDGE('',*,*,#73993,.T.); +#74231 = ORIENTED_EDGE('',*,*,#74208,.T.); +#74232 = ORIENTED_EDGE('',*,*,#74233,.F.); +#74233 = EDGE_CURVE('',#74234,#74209,#74236,.T.); +#74234 = VERTEX_POINT('',#74235); +#74235 = CARTESIAN_POINT('',(-2.35,-1.75,0.55)); +#74236 = CIRCLE('',#74237,0.1); +#74237 = AXIS2_PLACEMENT_3D('',#74238,#74239,#74240); +#74238 = CARTESIAN_POINT('',(-2.25,-1.75,0.55)); +#74239 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74240 = DIRECTION('',(0.,0.,1.)); +#74241 = ORIENTED_EDGE('',*,*,#74242,.F.); +#74242 = EDGE_CURVE('',#73986,#74234,#74243,.T.); +#74243 = LINE('',#74244,#74245); +#74244 = CARTESIAN_POINT('',(-2.35,-1.6,0.55)); +#74245 = VECTOR('',#74246,1.); +#74246 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74247 = CYLINDRICAL_SURFACE('',#74248,0.1); +#74248 = AXIS2_PLACEMENT_3D('',#74249,#74250,#74251); +#74249 = CARTESIAN_POINT('',(-2.25,-1.6,0.55)); +#74250 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74251 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74252 = ADVANCED_FACE('',(#74253),#74509,.F.); +#74253 = FACE_BOUND('',#74254,.F.); +#74254 = EDGE_LOOP('',(#74255,#74256,#74264,#74272,#74280,#74288,#74296, + #74304,#74312,#74320,#74328,#74336,#74344,#74352,#74360,#74368, + #74376,#74384,#74392,#74398,#74399,#74400,#74408,#74416,#74424, + #74432,#74440,#74448,#74454,#74455,#74463,#74471,#74479,#74487, + #74495,#74503)); +#74255 = ORIENTED_EDGE('',*,*,#74137,.F.); +#74256 = ORIENTED_EDGE('',*,*,#74257,.T.); +#74257 = EDGE_CURVE('',#74130,#74258,#74260,.T.); +#74258 = VERTEX_POINT('',#74259); +#74259 = CARTESIAN_POINT('',(-2.35,1.6,0.55)); +#74260 = LINE('',#74261,#74262); +#74261 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74262 = VECTOR('',#74263,1.); +#74263 = DIRECTION('',(0.,0.,1.)); +#74264 = ORIENTED_EDGE('',*,*,#74265,.T.); +#74265 = EDGE_CURVE('',#74258,#74266,#74268,.T.); +#74266 = VERTEX_POINT('',#74267); +#74267 = CARTESIAN_POINT('',(-2.35,1.6,0.9)); +#74268 = LINE('',#74269,#74270); +#74269 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74270 = VECTOR('',#74271,1.); +#74271 = DIRECTION('',(0.,0.,1.)); +#74272 = ORIENTED_EDGE('',*,*,#74273,.T.); +#74273 = EDGE_CURVE('',#74266,#74274,#74276,.T.); +#74274 = VERTEX_POINT('',#74275); +#74275 = CARTESIAN_POINT('',(-2.35,1.75,0.9)); +#74276 = LINE('',#74277,#74278); +#74277 = CARTESIAN_POINT('',(-2.35,1.6,0.9)); +#74278 = VECTOR('',#74279,1.); +#74279 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#74280 = ORIENTED_EDGE('',*,*,#74281,.T.); +#74281 = EDGE_CURVE('',#74274,#74282,#74284,.T.); +#74282 = VERTEX_POINT('',#74283); +#74283 = CARTESIAN_POINT('',(-2.35,1.75,1.25)); +#74284 = LINE('',#74285,#74286); +#74285 = CARTESIAN_POINT('',(-2.35,1.75,0.9)); +#74286 = VECTOR('',#74287,1.); +#74287 = DIRECTION('',(0.,0.,1.)); +#74288 = ORIENTED_EDGE('',*,*,#74289,.T.); +#74289 = EDGE_CURVE('',#74282,#74290,#74292,.T.); +#74290 = VERTEX_POINT('',#74291); +#74291 = CARTESIAN_POINT('',(-2.35,1.6,1.5)); +#74292 = LINE('',#74293,#74294); +#74293 = CARTESIAN_POINT('',(-2.35,1.75,1.25)); +#74294 = VECTOR('',#74295,1.); +#74295 = DIRECTION('',(-5.712050337472E-17,-0.514495755428, + 0.857492925712)); +#74296 = ORIENTED_EDGE('',*,*,#74297,.T.); +#74297 = EDGE_CURVE('',#74290,#74298,#74300,.T.); +#74298 = VERTEX_POINT('',#74299); +#74299 = CARTESIAN_POINT('',(-2.35,0.4,1.5)); +#74300 = LINE('',#74301,#74302); +#74301 = CARTESIAN_POINT('',(-2.35,1.6,1.5)); +#74302 = VECTOR('',#74303,1.); +#74303 = DIRECTION('',(0.,-1.,0.)); +#74304 = ORIENTED_EDGE('',*,*,#74305,.T.); +#74305 = EDGE_CURVE('',#74298,#74306,#74308,.T.); +#74306 = VERTEX_POINT('',#74307); +#74307 = CARTESIAN_POINT('',(-2.35,0.4,1.)); +#74308 = LINE('',#74309,#74310); +#74309 = CARTESIAN_POINT('',(-2.35,0.4,1.65)); +#74310 = VECTOR('',#74311,1.); +#74311 = DIRECTION('',(0.,0.,-1.)); +#74312 = ORIENTED_EDGE('',*,*,#74313,.T.); +#74313 = EDGE_CURVE('',#74306,#74314,#74316,.T.); +#74314 = VERTEX_POINT('',#74315); +#74315 = CARTESIAN_POINT('',(-2.35,0.4,0.95)); +#74316 = LINE('',#74317,#74318); +#74317 = CARTESIAN_POINT('',(-2.35,0.4,1.65)); +#74318 = VECTOR('',#74319,1.); +#74319 = DIRECTION('',(0.,0.,-1.)); +#74320 = ORIENTED_EDGE('',*,*,#74321,.T.); +#74321 = EDGE_CURVE('',#74314,#74322,#74324,.T.); +#74322 = VERTEX_POINT('',#74323); +#74323 = CARTESIAN_POINT('',(-2.35,0.35,0.95)); +#74324 = LINE('',#74325,#74326); +#74325 = CARTESIAN_POINT('',(-2.35,0.4,0.95)); +#74326 = VECTOR('',#74327,1.); +#74327 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74328 = ORIENTED_EDGE('',*,*,#74329,.T.); +#74329 = EDGE_CURVE('',#74322,#74330,#74332,.T.); +#74330 = VERTEX_POINT('',#74331); +#74331 = CARTESIAN_POINT('',(-2.35,-0.35,0.95)); +#74332 = LINE('',#74333,#74334); +#74333 = CARTESIAN_POINT('',(-2.35,0.35,0.95)); +#74334 = VECTOR('',#74335,1.); +#74335 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74336 = ORIENTED_EDGE('',*,*,#74337,.T.); +#74337 = EDGE_CURVE('',#74330,#74338,#74340,.T.); +#74338 = VERTEX_POINT('',#74339); +#74339 = CARTESIAN_POINT('',(-2.35,-0.4,0.95)); +#74340 = LINE('',#74341,#74342); +#74341 = CARTESIAN_POINT('',(-2.35,0.4,0.95)); +#74342 = VECTOR('',#74343,1.); +#74343 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74344 = ORIENTED_EDGE('',*,*,#74345,.T.); +#74345 = EDGE_CURVE('',#74338,#74346,#74348,.T.); +#74346 = VERTEX_POINT('',#74347); +#74347 = CARTESIAN_POINT('',(-2.35,-0.4,1.)); +#74348 = LINE('',#74349,#74350); +#74349 = CARTESIAN_POINT('',(-2.35,-0.4,0.95)); +#74350 = VECTOR('',#74351,1.); +#74351 = DIRECTION('',(0.,0.,1.)); +#74352 = ORIENTED_EDGE('',*,*,#74353,.T.); +#74353 = EDGE_CURVE('',#74346,#74354,#74356,.T.); +#74354 = VERTEX_POINT('',#74355); +#74355 = CARTESIAN_POINT('',(-2.35,-0.4,1.5)); +#74356 = LINE('',#74357,#74358); +#74357 = CARTESIAN_POINT('',(-2.35,-0.4,0.95)); +#74358 = VECTOR('',#74359,1.); +#74359 = DIRECTION('',(0.,0.,1.)); +#74360 = ORIENTED_EDGE('',*,*,#74361,.T.); +#74361 = EDGE_CURVE('',#74354,#74362,#74364,.T.); +#74362 = VERTEX_POINT('',#74363); +#74363 = CARTESIAN_POINT('',(-2.35,-1.6,1.5)); +#74364 = LINE('',#74365,#74366); +#74365 = CARTESIAN_POINT('',(-2.35,1.6,1.5)); +#74366 = VECTOR('',#74367,1.); +#74367 = DIRECTION('',(0.,-1.,0.)); +#74368 = ORIENTED_EDGE('',*,*,#74369,.F.); +#74369 = EDGE_CURVE('',#74370,#74362,#74372,.T.); +#74370 = VERTEX_POINT('',#74371); +#74371 = CARTESIAN_POINT('',(-2.35,-1.75,1.25)); +#74372 = LINE('',#74373,#74374); +#74373 = CARTESIAN_POINT('',(-2.35,-1.75,1.25)); +#74374 = VECTOR('',#74375,1.); +#74375 = DIRECTION('',(1.142410067494E-16,0.514495755428,0.857492925712) + ); +#74376 = ORIENTED_EDGE('',*,*,#74377,.F.); +#74377 = EDGE_CURVE('',#74378,#74370,#74380,.T.); +#74378 = VERTEX_POINT('',#74379); +#74379 = CARTESIAN_POINT('',(-2.35,-1.75,0.9)); +#74380 = LINE('',#74381,#74382); +#74381 = CARTESIAN_POINT('',(-2.35,-1.75,0.9)); +#74382 = VECTOR('',#74383,1.); +#74383 = DIRECTION('',(0.,0.,1.)); +#74384 = ORIENTED_EDGE('',*,*,#74385,.F.); +#74385 = EDGE_CURVE('',#74386,#74378,#74388,.T.); +#74386 = VERTEX_POINT('',#74387); +#74387 = CARTESIAN_POINT('',(-2.35,-1.6,0.9)); +#74388 = LINE('',#74389,#74390); +#74389 = CARTESIAN_POINT('',(-2.35,-1.6,0.9)); +#74390 = VECTOR('',#74391,1.); +#74391 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#74392 = ORIENTED_EDGE('',*,*,#74393,.F.); +#74393 = EDGE_CURVE('',#73986,#74386,#74394,.T.); +#74394 = LINE('',#74395,#74396); +#74395 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#74396 = VECTOR('',#74397,1.); +#74397 = DIRECTION('',(0.,0.,1.)); +#74398 = ORIENTED_EDGE('',*,*,#73985,.F.); +#74399 = ORIENTED_EDGE('',*,*,#74082,.F.); +#74400 = ORIENTED_EDGE('',*,*,#74401,.T.); +#74401 = EDGE_CURVE('',#74075,#74402,#74404,.T.); +#74402 = VERTEX_POINT('',#74403); +#74403 = CARTESIAN_POINT('',(-2.35,-1.15,3.105286689018E-02)); +#74404 = LINE('',#74405,#74406); +#74405 = CARTESIAN_POINT('',(-2.35,-1.15,0.)); +#74406 = VECTOR('',#74407,1.); +#74407 = DIRECTION('',(0.,0.,1.)); +#74408 = ORIENTED_EDGE('',*,*,#74409,.T.); +#74409 = EDGE_CURVE('',#74402,#74410,#74412,.T.); +#74410 = VERTEX_POINT('',#74411); +#74411 = CARTESIAN_POINT('',(-2.35,-1.15,0.2)); +#74412 = LINE('',#74413,#74414); +#74413 = CARTESIAN_POINT('',(-2.35,-1.15,0.)); +#74414 = VECTOR('',#74415,1.); +#74415 = DIRECTION('',(0.,0.,1.)); +#74416 = ORIENTED_EDGE('',*,*,#74417,.F.); +#74417 = EDGE_CURVE('',#74418,#74410,#74420,.T.); +#74418 = VERTEX_POINT('',#74419); +#74419 = CARTESIAN_POINT('',(-2.35,-1.15,0.360555127546)); +#74420 = LINE('',#74421,#74422); +#74421 = CARTESIAN_POINT('',(-2.35,-1.15,0.1393320958)); +#74422 = VECTOR('',#74423,1.); +#74423 = DIRECTION('',(0.,-0.,-1.)); +#74424 = ORIENTED_EDGE('',*,*,#74425,.F.); +#74425 = EDGE_CURVE('',#74426,#74418,#74428,.T.); +#74426 = VERTEX_POINT('',#74427); +#74427 = CARTESIAN_POINT('',(-2.35,-0.55,0.360555127546)); +#74428 = LINE('',#74429,#74430); +#74429 = CARTESIAN_POINT('',(-2.35,0.375,0.360555127546)); +#74430 = VECTOR('',#74431,1.); +#74431 = DIRECTION('',(0.,-1.,-1.836970198721E-16)); +#74432 = ORIENTED_EDGE('',*,*,#74433,.T.); +#74433 = EDGE_CURVE('',#74426,#74434,#74436,.T.); +#74434 = VERTEX_POINT('',#74435); +#74435 = CARTESIAN_POINT('',(-2.35,-0.55,0.2)); +#74436 = LINE('',#74437,#74438); +#74437 = CARTESIAN_POINT('',(-2.35,-0.55,0.1393320958)); +#74438 = VECTOR('',#74439,1.); +#74439 = DIRECTION('',(0.,-0.,-1.)); +#74440 = ORIENTED_EDGE('',*,*,#74441,.T.); +#74441 = EDGE_CURVE('',#74434,#74442,#74444,.T.); +#74442 = VERTEX_POINT('',#74443); +#74443 = CARTESIAN_POINT('',(-2.35,-0.55,3.105286689018E-02)); +#74444 = LINE('',#74445,#74446); +#74445 = CARTESIAN_POINT('',(-2.35,-0.55,0.)); +#74446 = VECTOR('',#74447,1.); +#74447 = DIRECTION('',(0.,0.,-1.)); +#74448 = ORIENTED_EDGE('',*,*,#74449,.T.); +#74449 = EDGE_CURVE('',#74442,#74035,#74450,.T.); +#74450 = LINE('',#74451,#74452); +#74451 = CARTESIAN_POINT('',(-2.35,-0.55,0.)); +#74452 = VECTOR('',#74453,1.); +#74453 = DIRECTION('',(0.,0.,-1.)); +#74454 = ORIENTED_EDGE('',*,*,#74034,.F.); +#74455 = ORIENTED_EDGE('',*,*,#74456,.T.); +#74456 = EDGE_CURVE('',#74025,#74457,#74459,.T.); +#74457 = VERTEX_POINT('',#74458); +#74458 = CARTESIAN_POINT('',(-2.35,0.55,3.105286689018E-02)); +#74459 = LINE('',#74460,#74461); +#74460 = CARTESIAN_POINT('',(-2.35,0.55,0.)); +#74461 = VECTOR('',#74462,1.); +#74462 = DIRECTION('',(0.,0.,1.)); +#74463 = ORIENTED_EDGE('',*,*,#74464,.T.); +#74464 = EDGE_CURVE('',#74457,#74465,#74467,.T.); +#74465 = VERTEX_POINT('',#74466); +#74466 = CARTESIAN_POINT('',(-2.35,0.55,0.2)); +#74467 = LINE('',#74468,#74469); +#74468 = CARTESIAN_POINT('',(-2.35,0.55,0.)); +#74469 = VECTOR('',#74470,1.); +#74470 = DIRECTION('',(0.,0.,1.)); +#74471 = ORIENTED_EDGE('',*,*,#74472,.F.); +#74472 = EDGE_CURVE('',#74473,#74465,#74475,.T.); +#74473 = VERTEX_POINT('',#74474); +#74474 = CARTESIAN_POINT('',(-2.35,0.55,0.360555127546)); +#74475 = LINE('',#74476,#74477); +#74476 = CARTESIAN_POINT('',(-2.35,0.55,0.1393320958)); +#74477 = VECTOR('',#74478,1.); +#74478 = DIRECTION('',(0.,-0.,-1.)); +#74479 = ORIENTED_EDGE('',*,*,#74480,.F.); +#74480 = EDGE_CURVE('',#74481,#74473,#74483,.T.); +#74481 = VERTEX_POINT('',#74482); +#74482 = CARTESIAN_POINT('',(-2.35,1.15,0.360555127546)); +#74483 = LINE('',#74484,#74485); +#74484 = CARTESIAN_POINT('',(-2.35,1.225,0.360555127546)); +#74485 = VECTOR('',#74486,1.); +#74486 = DIRECTION('',(0.,-1.,-1.836970198721E-16)); +#74487 = ORIENTED_EDGE('',*,*,#74488,.T.); +#74488 = EDGE_CURVE('',#74481,#74489,#74491,.T.); +#74489 = VERTEX_POINT('',#74490); +#74490 = CARTESIAN_POINT('',(-2.35,1.15,0.2)); +#74491 = LINE('',#74492,#74493); +#74492 = CARTESIAN_POINT('',(-2.35,1.15,0.1393320958)); +#74493 = VECTOR('',#74494,1.); +#74494 = DIRECTION('',(0.,-0.,-1.)); +#74495 = ORIENTED_EDGE('',*,*,#74496,.T.); +#74496 = EDGE_CURVE('',#74489,#74497,#74499,.T.); +#74497 = VERTEX_POINT('',#74498); +#74498 = CARTESIAN_POINT('',(-2.35,1.15,3.105286689018E-02)); +#74499 = LINE('',#74500,#74501); +#74500 = CARTESIAN_POINT('',(-2.35,1.15,0.)); +#74501 = VECTOR('',#74502,1.); +#74502 = DIRECTION('',(0.,0.,-1.)); +#74503 = ORIENTED_EDGE('',*,*,#74504,.T.); +#74504 = EDGE_CURVE('',#74497,#74138,#74505,.T.); +#74505 = LINE('',#74506,#74507); +#74506 = CARTESIAN_POINT('',(-2.35,1.15,0.)); +#74507 = VECTOR('',#74508,1.); +#74508 = DIRECTION('',(0.,0.,-1.)); +#74509 = PLANE('',#74510); +#74510 = AXIS2_PLACEMENT_3D('',#74511,#74512,#74513); +#74511 = CARTESIAN_POINT('',(-2.35,1.6,0.)); +#74512 = DIRECTION('',(1.,0.,0.)); +#74513 = DIRECTION('',(0.,-1.,0.)); +#74514 = ADVANCED_FACE('',(#74515),#74526,.T.); +#74515 = FACE_BOUND('',#74516,.T.); +#74516 = EDGE_LOOP('',(#74517,#74518,#74519)); +#74517 = ORIENTED_EDGE('',*,*,#74024,.F.); +#74518 = ORIENTED_EDGE('',*,*,#74456,.T.); +#74519 = ORIENTED_EDGE('',*,*,#74520,.T.); +#74520 = EDGE_CURVE('',#74457,#74027,#74521,.T.); +#74521 = CIRCLE('',#74522,0.2); +#74522 = AXIS2_PLACEMENT_3D('',#74523,#74524,#74525); +#74523 = CARTESIAN_POINT('',(-2.242963248302,0.55,0.2)); +#74524 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#74525 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74526 = PLANE('',#74527); +#74527 = AXIS2_PLACEMENT_3D('',#74528,#74529,#74530); +#74528 = CARTESIAN_POINT('',(-2.75,0.55,0.)); +#74529 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#74530 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74531 = ADVANCED_FACE('',(#74532),#74543,.T.); +#74532 = FACE_BOUND('',#74533,.T.); +#74533 = EDGE_LOOP('',(#74534,#74540,#74541,#74542)); +#74534 = ORIENTED_EDGE('',*,*,#74535,.F.); +#74535 = EDGE_CURVE('',#74146,#74027,#74536,.T.); +#74536 = LINE('',#74537,#74538); +#74537 = CARTESIAN_POINT('',(-2.242963248302,1.15,5.551115123126E-17)); +#74538 = VECTOR('',#74539,1.); +#74539 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74540 = ORIENTED_EDGE('',*,*,#74153,.F.); +#74541 = ORIENTED_EDGE('',*,*,#74161,.F.); +#74542 = ORIENTED_EDGE('',*,*,#74169,.F.); +#74543 = PLANE('',#74544); +#74544 = AXIS2_PLACEMENT_3D('',#74545,#74546,#74547); +#74545 = CARTESIAN_POINT('',(-2.242963248302,0.85,5.551115123126E-17)); +#74546 = DIRECTION('',(-1.412629589944E-16,1.729972305706E-32,-1.)); +#74547 = DIRECTION('',(1.,-1.224646799147E-16,-1.412629589944E-16)); +#74548 = ADVANCED_FACE('',(#74549),#74560,.T.); +#74549 = FACE_BOUND('',#74550,.T.); +#74550 = EDGE_LOOP('',(#74551,#74552,#74559)); +#74551 = ORIENTED_EDGE('',*,*,#74145,.F.); +#74552 = ORIENTED_EDGE('',*,*,#74553,.F.); +#74553 = EDGE_CURVE('',#74497,#74146,#74554,.T.); +#74554 = CIRCLE('',#74555,0.2); +#74555 = AXIS2_PLACEMENT_3D('',#74556,#74557,#74558); +#74556 = CARTESIAN_POINT('',(-2.242963248302,1.15,0.2)); +#74557 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#74558 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74559 = ORIENTED_EDGE('',*,*,#74504,.T.); +#74560 = PLANE('',#74561); +#74561 = AXIS2_PLACEMENT_3D('',#74562,#74563,#74564); +#74562 = CARTESIAN_POINT('',(-1.85,1.15,0.)); +#74563 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74564 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74565 = ADVANCED_FACE('',(#74566),#74593,.F.); +#74566 = FACE_BOUND('',#74567,.F.); +#74567 = EDGE_LOOP('',(#74568,#74576,#74584,#74591,#74592)); +#74568 = ORIENTED_EDGE('',*,*,#74569,.T.); +#74569 = EDGE_CURVE('',#74122,#74570,#74572,.T.); +#74570 = VERTEX_POINT('',#74571); +#74571 = CARTESIAN_POINT('',(-1.325,1.6,0.45)); +#74572 = LINE('',#74573,#74574); +#74573 = CARTESIAN_POINT('',(-1.325,1.6,0.)); +#74574 = VECTOR('',#74575,1.); +#74575 = DIRECTION('',(0.,0.,1.)); +#74576 = ORIENTED_EDGE('',*,*,#74577,.F.); +#74577 = EDGE_CURVE('',#74578,#74570,#74580,.T.); +#74578 = VERTEX_POINT('',#74579); +#74579 = CARTESIAN_POINT('',(-2.25,1.6,0.45)); +#74580 = LINE('',#74581,#74582); +#74581 = CARTESIAN_POINT('',(-2.35,1.6,0.45)); +#74582 = VECTOR('',#74583,1.); +#74583 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#74584 = ORIENTED_EDGE('',*,*,#74585,.F.); +#74585 = EDGE_CURVE('',#74258,#74578,#74586,.T.); +#74586 = CIRCLE('',#74587,0.1); +#74587 = AXIS2_PLACEMENT_3D('',#74588,#74589,#74590); +#74588 = CARTESIAN_POINT('',(-2.25,1.6,0.55)); +#74589 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#74590 = DIRECTION('',(0.,0.,1.)); +#74591 = ORIENTED_EDGE('',*,*,#74257,.F.); +#74592 = ORIENTED_EDGE('',*,*,#74129,.F.); +#74593 = PLANE('',#74594); +#74594 = AXIS2_PLACEMENT_3D('',#74595,#74596,#74597); +#74595 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#74596 = DIRECTION('',(0.,-1.,0.)); +#74597 = DIRECTION('',(-1.,0.,0.)); +#74598 = ADVANCED_FACE('',(#74599),#74617,.F.); +#74599 = FACE_BOUND('',#74600,.F.); +#74600 = EDGE_LOOP('',(#74601,#74602,#74603,#74611)); +#74601 = ORIENTED_EDGE('',*,*,#74569,.F.); +#74602 = ORIENTED_EDGE('',*,*,#74121,.T.); +#74603 = ORIENTED_EDGE('',*,*,#74604,.T.); +#74604 = EDGE_CURVE('',#74114,#74605,#74607,.T.); +#74605 = VERTEX_POINT('',#74606); +#74606 = CARTESIAN_POINT('',(-1.325,1.75,0.45)); +#74607 = LINE('',#74608,#74609); +#74608 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74609 = VECTOR('',#74610,1.); +#74610 = DIRECTION('',(0.,0.,1.)); +#74611 = ORIENTED_EDGE('',*,*,#74612,.F.); +#74612 = EDGE_CURVE('',#74570,#74605,#74613,.T.); +#74613 = LINE('',#74614,#74615); +#74614 = CARTESIAN_POINT('',(-1.325,1.6,0.45)); +#74615 = VECTOR('',#74616,1.); +#74616 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#74617 = PLANE('',#74618); +#74618 = AXIS2_PLACEMENT_3D('',#74619,#74620,#74621); +#74619 = CARTESIAN_POINT('',(-1.325,1.6,0.)); +#74620 = DIRECTION('',(1.,0.,0.)); +#74621 = DIRECTION('',(0.,0.,1.)); +#74622 = ADVANCED_FACE('',(#74623),#74689,.T.); +#74623 = FACE_BOUND('',#74624,.T.); +#74624 = EDGE_LOOP('',(#74625,#74626,#74627,#74635,#74643,#74651,#74659, + #74667,#74675,#74683)); +#74625 = ORIENTED_EDGE('',*,*,#74113,.F.); +#74626 = ORIENTED_EDGE('',*,*,#74604,.T.); +#74627 = ORIENTED_EDGE('',*,*,#74628,.T.); +#74628 = EDGE_CURVE('',#74605,#74629,#74631,.T.); +#74629 = VERTEX_POINT('',#74630); +#74630 = CARTESIAN_POINT('',(-1.325,1.75,1.1)); +#74631 = LINE('',#74632,#74633); +#74632 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74633 = VECTOR('',#74634,1.); +#74634 = DIRECTION('',(0.,0.,1.)); +#74635 = ORIENTED_EDGE('',*,*,#74636,.T.); +#74636 = EDGE_CURVE('',#74629,#74637,#74639,.T.); +#74637 = VERTEX_POINT('',#74638); +#74638 = CARTESIAN_POINT('',(1.325,1.75,1.1)); +#74639 = LINE('',#74640,#74641); +#74640 = CARTESIAN_POINT('',(-1.325,1.75,1.1)); +#74641 = VECTOR('',#74642,1.); +#74642 = DIRECTION('',(1.,0.,0.)); +#74643 = ORIENTED_EDGE('',*,*,#74644,.F.); +#74644 = EDGE_CURVE('',#74645,#74637,#74647,.T.); +#74645 = VERTEX_POINT('',#74646); +#74646 = CARTESIAN_POINT('',(1.325,1.75,0.45)); +#74647 = LINE('',#74648,#74649); +#74648 = CARTESIAN_POINT('',(1.325,1.75,0.)); +#74649 = VECTOR('',#74650,1.); +#74650 = DIRECTION('',(0.,0.,1.)); +#74651 = ORIENTED_EDGE('',*,*,#74652,.F.); +#74652 = EDGE_CURVE('',#74653,#74645,#74655,.T.); +#74653 = VERTEX_POINT('',#74654); +#74654 = CARTESIAN_POINT('',(1.325,1.75,0.)); +#74655 = LINE('',#74656,#74657); +#74656 = CARTESIAN_POINT('',(1.325,1.75,0.)); +#74657 = VECTOR('',#74658,1.); +#74658 = DIRECTION('',(0.,0.,1.)); +#74659 = ORIENTED_EDGE('',*,*,#74660,.F.); +#74660 = EDGE_CURVE('',#74661,#74653,#74663,.T.); +#74661 = VERTEX_POINT('',#74662); +#74662 = CARTESIAN_POINT('',(0.5,1.75,0.)); +#74663 = LINE('',#74664,#74665); +#74664 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74665 = VECTOR('',#74666,1.); +#74666 = DIRECTION('',(1.,0.,0.)); +#74667 = ORIENTED_EDGE('',*,*,#74668,.T.); +#74668 = EDGE_CURVE('',#74661,#74669,#74671,.T.); +#74669 = VERTEX_POINT('',#74670); +#74670 = CARTESIAN_POINT('',(0.5,1.75,3.E-02)); +#74671 = LINE('',#74672,#74673); +#74672 = CARTESIAN_POINT('',(0.5,1.75,0.)); +#74673 = VECTOR('',#74674,1.); +#74674 = DIRECTION('',(0.,0.,1.)); +#74675 = ORIENTED_EDGE('',*,*,#74676,.F.); +#74676 = EDGE_CURVE('',#74677,#74669,#74679,.T.); +#74677 = VERTEX_POINT('',#74678); +#74678 = CARTESIAN_POINT('',(-0.5,1.75,3.E-02)); +#74679 = LINE('',#74680,#74681); +#74680 = CARTESIAN_POINT('',(-0.5,1.75,3.E-02)); +#74681 = VECTOR('',#74682,1.); +#74682 = DIRECTION('',(1.,0.,0.)); +#74683 = ORIENTED_EDGE('',*,*,#74684,.F.); +#74684 = EDGE_CURVE('',#74106,#74677,#74685,.T.); +#74685 = LINE('',#74686,#74687); +#74686 = CARTESIAN_POINT('',(-0.5,1.75,0.)); +#74687 = VECTOR('',#74688,1.); +#74688 = DIRECTION('',(0.,0.,1.)); +#74689 = PLANE('',#74690); +#74690 = AXIS2_PLACEMENT_3D('',#74691,#74692,#74693); +#74691 = CARTESIAN_POINT('',(-1.325,1.75,0.)); +#74692 = DIRECTION('',(0.,1.,0.)); +#74693 = DIRECTION('',(0.,-0.,1.)); +#74694 = ADVANCED_FACE('',(#74695),#74713,.T.); +#74695 = FACE_BOUND('',#74696,.T.); +#74696 = EDGE_LOOP('',(#74697,#74705,#74706,#74707)); +#74697 = ORIENTED_EDGE('',*,*,#74698,.F.); +#74698 = EDGE_CURVE('',#74098,#74699,#74701,.T.); +#74699 = VERTEX_POINT('',#74700); +#74700 = CARTESIAN_POINT('',(-0.5,-1.75,3.E-02)); +#74701 = LINE('',#74702,#74703); +#74702 = CARTESIAN_POINT('',(-0.5,-1.75,0.)); +#74703 = VECTOR('',#74704,1.); +#74704 = DIRECTION('',(0.,0.,1.)); +#74705 = ORIENTED_EDGE('',*,*,#74105,.T.); +#74706 = ORIENTED_EDGE('',*,*,#74684,.T.); +#74707 = ORIENTED_EDGE('',*,*,#74708,.F.); +#74708 = EDGE_CURVE('',#74699,#74677,#74709,.T.); +#74709 = LINE('',#74710,#74711); +#74710 = CARTESIAN_POINT('',(-0.5,-1.75,3.E-02)); +#74711 = VECTOR('',#74712,1.); +#74712 = DIRECTION('',(0.,1.,0.)); +#74713 = PLANE('',#74714); +#74714 = AXIS2_PLACEMENT_3D('',#74715,#74716,#74717); +#74715 = CARTESIAN_POINT('',(-0.5,-1.75,0.)); +#74716 = DIRECTION('',(1.,0.,0.)); +#74717 = DIRECTION('',(0.,0.,1.)); +#74718 = ADVANCED_FACE('',(#74719),#74778,.F.); +#74719 = FACE_BOUND('',#74720,.F.); +#74720 = EDGE_LOOP('',(#74721,#74722,#74723,#74731,#74739,#74747,#74755, + #74763,#74771,#74777)); +#74721 = ORIENTED_EDGE('',*,*,#74097,.F.); +#74722 = ORIENTED_EDGE('',*,*,#74183,.T.); +#74723 = ORIENTED_EDGE('',*,*,#74724,.T.); +#74724 = EDGE_CURVE('',#74184,#74725,#74727,.T.); +#74725 = VERTEX_POINT('',#74726); +#74726 = CARTESIAN_POINT('',(-1.325,-1.75,1.1)); +#74727 = LINE('',#74728,#74729); +#74728 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74729 = VECTOR('',#74730,1.); +#74730 = DIRECTION('',(0.,0.,1.)); +#74731 = ORIENTED_EDGE('',*,*,#74732,.T.); +#74732 = EDGE_CURVE('',#74725,#74733,#74735,.T.); +#74733 = VERTEX_POINT('',#74734); +#74734 = CARTESIAN_POINT('',(1.325,-1.75,1.1)); +#74735 = LINE('',#74736,#74737); +#74736 = CARTESIAN_POINT('',(-1.325,-1.75,1.1)); +#74737 = VECTOR('',#74738,1.); +#74738 = DIRECTION('',(1.,0.,0.)); +#74739 = ORIENTED_EDGE('',*,*,#74740,.F.); +#74740 = EDGE_CURVE('',#74741,#74733,#74743,.T.); +#74741 = VERTEX_POINT('',#74742); +#74742 = CARTESIAN_POINT('',(1.325,-1.75,0.45)); +#74743 = LINE('',#74744,#74745); +#74744 = CARTESIAN_POINT('',(1.325,-1.75,0.)); +#74745 = VECTOR('',#74746,1.); +#74746 = DIRECTION('',(0.,0.,1.)); +#74747 = ORIENTED_EDGE('',*,*,#74748,.F.); +#74748 = EDGE_CURVE('',#74749,#74741,#74751,.T.); +#74749 = VERTEX_POINT('',#74750); +#74750 = CARTESIAN_POINT('',(1.325,-1.75,0.)); +#74751 = LINE('',#74752,#74753); +#74752 = CARTESIAN_POINT('',(1.325,-1.75,0.)); +#74753 = VECTOR('',#74754,1.); +#74754 = DIRECTION('',(0.,0.,1.)); +#74755 = ORIENTED_EDGE('',*,*,#74756,.F.); +#74756 = EDGE_CURVE('',#74757,#74749,#74759,.T.); +#74757 = VERTEX_POINT('',#74758); +#74758 = CARTESIAN_POINT('',(0.5,-1.75,0.)); +#74759 = LINE('',#74760,#74761); +#74760 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74761 = VECTOR('',#74762,1.); +#74762 = DIRECTION('',(1.,0.,0.)); +#74763 = ORIENTED_EDGE('',*,*,#74764,.T.); +#74764 = EDGE_CURVE('',#74757,#74765,#74767,.T.); +#74765 = VERTEX_POINT('',#74766); +#74766 = CARTESIAN_POINT('',(0.5,-1.75,3.E-02)); +#74767 = LINE('',#74768,#74769); +#74768 = CARTESIAN_POINT('',(0.5,-1.75,0.)); +#74769 = VECTOR('',#74770,1.); +#74770 = DIRECTION('',(0.,0.,1.)); +#74771 = ORIENTED_EDGE('',*,*,#74772,.F.); +#74772 = EDGE_CURVE('',#74699,#74765,#74773,.T.); +#74773 = LINE('',#74774,#74775); +#74774 = CARTESIAN_POINT('',(-0.5,-1.75,3.E-02)); +#74775 = VECTOR('',#74776,1.); +#74776 = DIRECTION('',(1.,0.,0.)); +#74777 = ORIENTED_EDGE('',*,*,#74698,.F.); +#74778 = PLANE('',#74779); +#74779 = AXIS2_PLACEMENT_3D('',#74780,#74781,#74782); +#74780 = CARTESIAN_POINT('',(-1.325,-1.75,0.)); +#74781 = DIRECTION('',(0.,1.,0.)); +#74782 = DIRECTION('',(0.,-0.,1.)); +#74783 = ADVANCED_FACE('',(#74784),#74795,.T.); +#74784 = FACE_BOUND('',#74785,.T.); +#74785 = EDGE_LOOP('',(#74786,#74787,#74788)); +#74786 = ORIENTED_EDGE('',*,*,#74074,.F.); +#74787 = ORIENTED_EDGE('',*,*,#74401,.T.); +#74788 = ORIENTED_EDGE('',*,*,#74789,.T.); +#74789 = EDGE_CURVE('',#74402,#74067,#74790,.T.); +#74790 = CIRCLE('',#74791,0.2); +#74791 = AXIS2_PLACEMENT_3D('',#74792,#74793,#74794); +#74792 = CARTESIAN_POINT('',(-2.242963248302,-1.15,0.2)); +#74793 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#74794 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74795 = PLANE('',#74796); +#74796 = AXIS2_PLACEMENT_3D('',#74797,#74798,#74799); +#74797 = CARTESIAN_POINT('',(-2.75,-1.15,0.)); +#74798 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#74799 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#74800 = ADVANCED_FACE('',(#74801),#74812,.T.); +#74801 = FACE_BOUND('',#74802,.T.); +#74802 = EDGE_LOOP('',(#74803,#74809,#74810,#74811)); +#74803 = ORIENTED_EDGE('',*,*,#74804,.F.); +#74804 = EDGE_CURVE('',#74043,#74067,#74805,.T.); +#74805 = LINE('',#74806,#74807); +#74806 = CARTESIAN_POINT('',(-2.242963248302,-0.55,5.551115123126E-17)); +#74807 = VECTOR('',#74808,1.); +#74808 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74809 = ORIENTED_EDGE('',*,*,#74050,.F.); +#74810 = ORIENTED_EDGE('',*,*,#74058,.F.); +#74811 = ORIENTED_EDGE('',*,*,#74066,.F.); +#74812 = PLANE('',#74813); +#74813 = AXIS2_PLACEMENT_3D('',#74814,#74815,#74816); +#74814 = CARTESIAN_POINT('',(-2.242963248302,-0.85,5.551115123126E-17)); +#74815 = DIRECTION('',(-1.412629589944E-16,1.729972305706E-32,-1.)); +#74816 = DIRECTION('',(1.,-1.224646799147E-16,-1.412629589944E-16)); +#74817 = ADVANCED_FACE('',(#74818),#74829,.T.); +#74818 = FACE_BOUND('',#74819,.T.); +#74819 = EDGE_LOOP('',(#74820,#74821,#74828)); +#74820 = ORIENTED_EDGE('',*,*,#74042,.F.); +#74821 = ORIENTED_EDGE('',*,*,#74822,.F.); +#74822 = EDGE_CURVE('',#74442,#74043,#74823,.T.); +#74823 = CIRCLE('',#74824,0.2); +#74824 = AXIS2_PLACEMENT_3D('',#74825,#74826,#74827); +#74825 = CARTESIAN_POINT('',(-2.242963248302,-0.55,0.2)); +#74826 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#74827 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74828 = ORIENTED_EDGE('',*,*,#74449,.T.); +#74829 = PLANE('',#74830); +#74830 = AXIS2_PLACEMENT_3D('',#74831,#74832,#74833); +#74831 = CARTESIAN_POINT('',(-1.85,-0.55,0.)); +#74832 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74833 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#74834 = ADVANCED_FACE('',(#74835),#74927,.F.); +#74835 = FACE_BOUND('',#74836,.F.); +#74836 = EDGE_LOOP('',(#74837,#74847,#74856,#74862,#74863,#74864,#74865, + #74866,#74867,#74873,#74881,#74889,#74897,#74905,#74913,#74921)); +#74837 = ORIENTED_EDGE('',*,*,#74838,.T.); +#74838 = EDGE_CURVE('',#74839,#74841,#74843,.T.); +#74839 = VERTEX_POINT('',#74840); +#74840 = CARTESIAN_POINT('',(2.35,-1.75,0.9)); +#74841 = VERTEX_POINT('',#74842); +#74842 = CARTESIAN_POINT('',(2.35,-1.75,0.55)); +#74843 = LINE('',#74844,#74845); +#74844 = CARTESIAN_POINT('',(2.35,-1.75,0.9)); +#74845 = VECTOR('',#74846,1.); +#74846 = DIRECTION('',(0.,0.,-1.)); +#74847 = ORIENTED_EDGE('',*,*,#74848,.T.); +#74848 = EDGE_CURVE('',#74841,#74849,#74851,.T.); +#74849 = VERTEX_POINT('',#74850); +#74850 = CARTESIAN_POINT('',(2.25,-1.75,0.45)); +#74851 = CIRCLE('',#74852,0.1); +#74852 = AXIS2_PLACEMENT_3D('',#74853,#74854,#74855); +#74853 = CARTESIAN_POINT('',(2.25,-1.75,0.55)); +#74854 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#74855 = DIRECTION('',(0.,0.,1.)); +#74856 = ORIENTED_EDGE('',*,*,#74857,.T.); +#74857 = EDGE_CURVE('',#74849,#74741,#74858,.T.); +#74858 = LINE('',#74859,#74860); +#74859 = CARTESIAN_POINT('',(2.35,-1.75,0.45)); +#74860 = VECTOR('',#74861,1.); +#74861 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74862 = ORIENTED_EDGE('',*,*,#74740,.T.); +#74863 = ORIENTED_EDGE('',*,*,#74732,.F.); +#74864 = ORIENTED_EDGE('',*,*,#74724,.F.); +#74865 = ORIENTED_EDGE('',*,*,#74216,.F.); +#74866 = ORIENTED_EDGE('',*,*,#74233,.F.); +#74867 = ORIENTED_EDGE('',*,*,#74868,.F.); +#74868 = EDGE_CURVE('',#74378,#74234,#74869,.T.); +#74869 = LINE('',#74870,#74871); +#74870 = CARTESIAN_POINT('',(-2.35,-1.75,0.9)); +#74871 = VECTOR('',#74872,1.); +#74872 = DIRECTION('',(0.,0.,-1.)); +#74873 = ORIENTED_EDGE('',*,*,#74874,.T.); +#74874 = EDGE_CURVE('',#74378,#74875,#74877,.T.); +#74875 = VERTEX_POINT('',#74876); +#74876 = CARTESIAN_POINT('',(-1.7,-1.75,0.9)); +#74877 = LINE('',#74878,#74879); +#74878 = CARTESIAN_POINT('',(-2.35,-1.75,0.9)); +#74879 = VECTOR('',#74880,1.); +#74880 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#74881 = ORIENTED_EDGE('',*,*,#74882,.T.); +#74882 = EDGE_CURVE('',#74875,#74883,#74885,.T.); +#74883 = VERTEX_POINT('',#74884); +#74884 = CARTESIAN_POINT('',(-1.7,-1.75,1.25)); +#74885 = LINE('',#74886,#74887); +#74886 = CARTESIAN_POINT('',(-1.7,-1.75,0.9)); +#74887 = VECTOR('',#74888,1.); +#74888 = DIRECTION('',(0.,0.,1.)); +#74889 = ORIENTED_EDGE('',*,*,#74890,.F.); +#74890 = EDGE_CURVE('',#74891,#74883,#74893,.T.); +#74891 = VERTEX_POINT('',#74892); +#74892 = CARTESIAN_POINT('',(-1.7,-1.75,1.5)); +#74893 = LINE('',#74894,#74895); +#74894 = CARTESIAN_POINT('',(-1.7,-1.75,1.5)); +#74895 = VECTOR('',#74896,1.); +#74896 = DIRECTION('',(0.,0.,-1.)); +#74897 = ORIENTED_EDGE('',*,*,#74898,.F.); +#74898 = EDGE_CURVE('',#74899,#74891,#74901,.T.); +#74899 = VERTEX_POINT('',#74900); +#74900 = CARTESIAN_POINT('',(1.7,-1.75,1.5)); +#74901 = LINE('',#74902,#74903); +#74902 = CARTESIAN_POINT('',(1.7,-1.75,1.5)); +#74903 = VECTOR('',#74904,1.); +#74904 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74905 = ORIENTED_EDGE('',*,*,#74906,.T.); +#74906 = EDGE_CURVE('',#74899,#74907,#74909,.T.); +#74907 = VERTEX_POINT('',#74908); +#74908 = CARTESIAN_POINT('',(1.7,-1.75,1.25)); +#74909 = LINE('',#74910,#74911); +#74910 = CARTESIAN_POINT('',(1.7,-1.75,1.5)); +#74911 = VECTOR('',#74912,1.); +#74912 = DIRECTION('',(0.,0.,-1.)); +#74913 = ORIENTED_EDGE('',*,*,#74914,.F.); +#74914 = EDGE_CURVE('',#74915,#74907,#74917,.T.); +#74915 = VERTEX_POINT('',#74916); +#74916 = CARTESIAN_POINT('',(1.7,-1.75,0.9)); +#74917 = LINE('',#74918,#74919); +#74918 = CARTESIAN_POINT('',(1.7,-1.75,0.9)); +#74919 = VECTOR('',#74920,1.); +#74920 = DIRECTION('',(0.,0.,1.)); +#74921 = ORIENTED_EDGE('',*,*,#74922,.F.); +#74922 = EDGE_CURVE('',#74839,#74915,#74923,.T.); +#74923 = LINE('',#74924,#74925); +#74924 = CARTESIAN_POINT('',(2.35,-1.75,0.9)); +#74925 = VECTOR('',#74926,1.); +#74926 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74927 = PLANE('',#74928); +#74928 = AXIS2_PLACEMENT_3D('',#74929,#74930,#74931); +#74929 = CARTESIAN_POINT('',(1.244301470588,-1.75,1.044301470588)); +#74930 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#74931 = DIRECTION('',(0.,0.,-1.)); +#74932 = ADVANCED_FACE('',(#74933),#74939,.T.); +#74933 = FACE_BOUND('',#74934,.F.); +#74934 = EDGE_LOOP('',(#74935,#74936,#74937,#74938)); +#74935 = ORIENTED_EDGE('',*,*,#74393,.T.); +#74936 = ORIENTED_EDGE('',*,*,#74385,.T.); +#74937 = ORIENTED_EDGE('',*,*,#74868,.T.); +#74938 = ORIENTED_EDGE('',*,*,#74242,.F.); +#74939 = PLANE('',#74940); +#74940 = AXIS2_PLACEMENT_3D('',#74941,#74942,#74943); +#74941 = CARTESIAN_POINT('',(-2.35,-1.6,0.9)); +#74942 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#74943 = DIRECTION('',(0.,0.,1.)); +#74944 = ADVANCED_FACE('',(#74945),#74980,.F.); +#74945 = FACE_BOUND('',#74946,.F.); +#74946 = EDGE_LOOP('',(#74947,#74957,#74965,#74972,#74973,#74974)); +#74947 = ORIENTED_EDGE('',*,*,#74948,.T.); +#74948 = EDGE_CURVE('',#74949,#74951,#74953,.T.); +#74949 = VERTEX_POINT('',#74950); +#74950 = CARTESIAN_POINT('',(-2.583589941132,1.15,0.710940039245)); +#74951 = VERTEX_POINT('',#74952); +#74952 = CARTESIAN_POINT('',(-2.75,1.15,0.6)); +#74953 = LINE('',#74954,#74955); +#74954 = CARTESIAN_POINT('',(-2.583589941132,1.15,0.710940039245)); +#74955 = VECTOR('',#74956,1.); +#74956 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74957 = ORIENTED_EDGE('',*,*,#74958,.T.); +#74958 = EDGE_CURVE('',#74951,#74959,#74961,.T.); +#74959 = VERTEX_POINT('',#74960); +#74960 = CARTESIAN_POINT('',(-2.40937330717,1.15,8.905996075495E-02)); +#74961 = LINE('',#74962,#74963); +#74962 = CARTESIAN_POINT('',(-2.75,1.15,0.6)); +#74963 = VECTOR('',#74964,1.); +#74964 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#74965 = ORIENTED_EDGE('',*,*,#74966,.T.); +#74966 = EDGE_CURVE('',#74959,#74497,#74967,.T.); +#74967 = CIRCLE('',#74968,0.2); +#74968 = AXIS2_PLACEMENT_3D('',#74969,#74970,#74971); +#74969 = CARTESIAN_POINT('',(-2.242963248302,1.15,0.2)); +#74970 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#74971 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#74972 = ORIENTED_EDGE('',*,*,#74496,.F.); +#74973 = ORIENTED_EDGE('',*,*,#74488,.F.); +#74974 = ORIENTED_EDGE('',*,*,#74975,.T.); +#74975 = EDGE_CURVE('',#74481,#74949,#74976,.T.); +#74976 = LINE('',#74977,#74978); +#74977 = CARTESIAN_POINT('',(-2.242963248302,1.15,0.2)); +#74978 = VECTOR('',#74979,1.); +#74979 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#74980 = PLANE('',#74981); +#74981 = AXIS2_PLACEMENT_3D('',#74982,#74983,#74984); +#74982 = CARTESIAN_POINT('',(-2.312197727425,1.15,0.2786641916)); +#74983 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#74984 = DIRECTION('',(0.,0.,1.)); +#74985 = ADVANCED_FACE('',(#74986),#75004,.T.); +#74986 = FACE_BOUND('',#74987,.T.); +#74987 = EDGE_LOOP('',(#74988,#74989,#74990,#74998)); +#74988 = ORIENTED_EDGE('',*,*,#74480,.F.); +#74989 = ORIENTED_EDGE('',*,*,#74975,.T.); +#74990 = ORIENTED_EDGE('',*,*,#74991,.F.); +#74991 = EDGE_CURVE('',#74992,#74949,#74994,.T.); +#74992 = VERTEX_POINT('',#74993); +#74993 = CARTESIAN_POINT('',(-2.583589941132,0.55,0.710940039245)); +#74994 = LINE('',#74995,#74996); +#74995 = CARTESIAN_POINT('',(-2.583589941132,0.55,0.710940039245)); +#74996 = VECTOR('',#74997,1.); +#74997 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#74998 = ORIENTED_EDGE('',*,*,#74999,.F.); +#74999 = EDGE_CURVE('',#74473,#74992,#75000,.T.); +#75000 = LINE('',#75001,#75002); +#75001 = CARTESIAN_POINT('',(-2.242963248302,0.55,0.2)); +#75002 = VECTOR('',#75003,1.); +#75003 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#75004 = PLANE('',#75005); +#75005 = AXIS2_PLACEMENT_3D('',#75006,#75007,#75008); +#75006 = CARTESIAN_POINT('',(-2.242963248302,0.85,0.2)); +#75007 = DIRECTION('',(0.832050294338,-1.01896772969E-16,0.554700196225) + ); +#75008 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#75009 = ADVANCED_FACE('',(#75010),#75038,.T.); +#75010 = FACE_BOUND('',#75011,.T.); +#75011 = EDGE_LOOP('',(#75012,#75020,#75028,#75035,#75036,#75037)); +#75012 = ORIENTED_EDGE('',*,*,#75013,.T.); +#75013 = EDGE_CURVE('',#74992,#75014,#75016,.T.); +#75014 = VERTEX_POINT('',#75015); +#75015 = CARTESIAN_POINT('',(-2.75,0.55,0.6)); +#75016 = LINE('',#75017,#75018); +#75017 = CARTESIAN_POINT('',(-2.583589941132,0.55,0.710940039245)); +#75018 = VECTOR('',#75019,1.); +#75019 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75020 = ORIENTED_EDGE('',*,*,#75021,.T.); +#75021 = EDGE_CURVE('',#75014,#75022,#75024,.T.); +#75022 = VERTEX_POINT('',#75023); +#75023 = CARTESIAN_POINT('',(-2.40937330717,0.55,8.905996075495E-02)); +#75024 = LINE('',#75025,#75026); +#75025 = CARTESIAN_POINT('',(-2.75,0.55,0.6)); +#75026 = VECTOR('',#75027,1.); +#75027 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#75028 = ORIENTED_EDGE('',*,*,#75029,.T.); +#75029 = EDGE_CURVE('',#75022,#74457,#75030,.T.); +#75030 = CIRCLE('',#75031,0.2); +#75031 = AXIS2_PLACEMENT_3D('',#75032,#75033,#75034); +#75032 = CARTESIAN_POINT('',(-2.242963248302,0.55,0.2)); +#75033 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#75034 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75035 = ORIENTED_EDGE('',*,*,#74464,.T.); +#75036 = ORIENTED_EDGE('',*,*,#74472,.F.); +#75037 = ORIENTED_EDGE('',*,*,#74999,.T.); +#75038 = PLANE('',#75039); +#75039 = AXIS2_PLACEMENT_3D('',#75040,#75041,#75042); +#75040 = CARTESIAN_POINT('',(-2.312197727425,0.55,0.2786641916)); +#75041 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75042 = DIRECTION('',(0.,0.,1.)); +#75043 = ADVANCED_FACE('',(#75044),#75079,.F.); +#75044 = FACE_BOUND('',#75045,.F.); +#75045 = EDGE_LOOP('',(#75046,#75056,#75064,#75071,#75072,#75073)); +#75046 = ORIENTED_EDGE('',*,*,#75047,.T.); +#75047 = EDGE_CURVE('',#75048,#75050,#75052,.T.); +#75048 = VERTEX_POINT('',#75049); +#75049 = CARTESIAN_POINT('',(-2.583589941132,-0.55,0.710940039245)); +#75050 = VERTEX_POINT('',#75051); +#75051 = CARTESIAN_POINT('',(-2.75,-0.55,0.6)); +#75052 = LINE('',#75053,#75054); +#75053 = CARTESIAN_POINT('',(-2.583589941132,-0.55,0.710940039245)); +#75054 = VECTOR('',#75055,1.); +#75055 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75056 = ORIENTED_EDGE('',*,*,#75057,.T.); +#75057 = EDGE_CURVE('',#75050,#75058,#75060,.T.); +#75058 = VERTEX_POINT('',#75059); +#75059 = CARTESIAN_POINT('',(-2.40937330717,-0.55,8.905996075495E-02)); +#75060 = LINE('',#75061,#75062); +#75061 = CARTESIAN_POINT('',(-2.75,-0.55,0.6)); +#75062 = VECTOR('',#75063,1.); +#75063 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#75064 = ORIENTED_EDGE('',*,*,#75065,.T.); +#75065 = EDGE_CURVE('',#75058,#74442,#75066,.T.); +#75066 = CIRCLE('',#75067,0.2); +#75067 = AXIS2_PLACEMENT_3D('',#75068,#75069,#75070); +#75068 = CARTESIAN_POINT('',(-2.242963248302,-0.55,0.2)); +#75069 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#75070 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75071 = ORIENTED_EDGE('',*,*,#74441,.F.); +#75072 = ORIENTED_EDGE('',*,*,#74433,.F.); +#75073 = ORIENTED_EDGE('',*,*,#75074,.T.); +#75074 = EDGE_CURVE('',#74426,#75048,#75075,.T.); +#75075 = LINE('',#75076,#75077); +#75076 = CARTESIAN_POINT('',(-2.242963248302,-0.55,0.2)); +#75077 = VECTOR('',#75078,1.); +#75078 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#75079 = PLANE('',#75080); +#75080 = AXIS2_PLACEMENT_3D('',#75081,#75082,#75083); +#75081 = CARTESIAN_POINT('',(-2.312197727425,-0.55,0.2786641916)); +#75082 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75083 = DIRECTION('',(0.,0.,1.)); +#75084 = ADVANCED_FACE('',(#75085),#75103,.T.); +#75085 = FACE_BOUND('',#75086,.T.); +#75086 = EDGE_LOOP('',(#75087,#75088,#75089,#75097)); +#75087 = ORIENTED_EDGE('',*,*,#74425,.F.); +#75088 = ORIENTED_EDGE('',*,*,#75074,.T.); +#75089 = ORIENTED_EDGE('',*,*,#75090,.F.); +#75090 = EDGE_CURVE('',#75091,#75048,#75093,.T.); +#75091 = VERTEX_POINT('',#75092); +#75092 = CARTESIAN_POINT('',(-2.583589941132,-1.15,0.710940039245)); +#75093 = LINE('',#75094,#75095); +#75094 = CARTESIAN_POINT('',(-2.583589941132,-1.15,0.710940039245)); +#75095 = VECTOR('',#75096,1.); +#75096 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#75097 = ORIENTED_EDGE('',*,*,#75098,.F.); +#75098 = EDGE_CURVE('',#74418,#75091,#75099,.T.); +#75099 = LINE('',#75100,#75101); +#75100 = CARTESIAN_POINT('',(-2.242963248302,-1.15,0.2)); +#75101 = VECTOR('',#75102,1.); +#75102 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#75103 = PLANE('',#75104); +#75104 = AXIS2_PLACEMENT_3D('',#75105,#75106,#75107); +#75105 = CARTESIAN_POINT('',(-2.242963248302,-0.85,0.2)); +#75106 = DIRECTION('',(0.832050294338,-1.01896772969E-16,0.554700196225) + ); +#75107 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#75108 = ADVANCED_FACE('',(#75109),#75137,.T.); +#75109 = FACE_BOUND('',#75110,.T.); +#75110 = EDGE_LOOP('',(#75111,#75119,#75127,#75134,#75135,#75136)); +#75111 = ORIENTED_EDGE('',*,*,#75112,.T.); +#75112 = EDGE_CURVE('',#75091,#75113,#75115,.T.); +#75113 = VERTEX_POINT('',#75114); +#75114 = CARTESIAN_POINT('',(-2.75,-1.15,0.6)); +#75115 = LINE('',#75116,#75117); +#75116 = CARTESIAN_POINT('',(-2.583589941132,-1.15,0.710940039245)); +#75117 = VECTOR('',#75118,1.); +#75118 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75119 = ORIENTED_EDGE('',*,*,#75120,.T.); +#75120 = EDGE_CURVE('',#75113,#75121,#75123,.T.); +#75121 = VERTEX_POINT('',#75122); +#75122 = CARTESIAN_POINT('',(-2.40937330717,-1.15,8.905996075495E-02)); +#75123 = LINE('',#75124,#75125); +#75124 = CARTESIAN_POINT('',(-2.75,-1.15,0.6)); +#75125 = VECTOR('',#75126,1.); +#75126 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#75127 = ORIENTED_EDGE('',*,*,#75128,.T.); +#75128 = EDGE_CURVE('',#75121,#74402,#75129,.T.); +#75129 = CIRCLE('',#75130,0.2); +#75130 = AXIS2_PLACEMENT_3D('',#75131,#75132,#75133); +#75131 = CARTESIAN_POINT('',(-2.242963248302,-1.15,0.2)); +#75132 = DIRECTION('',(-1.224646799147E-16,-1.,-4.29344502575E-33)); +#75133 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75134 = ORIENTED_EDGE('',*,*,#74409,.T.); +#75135 = ORIENTED_EDGE('',*,*,#74417,.F.); +#75136 = ORIENTED_EDGE('',*,*,#75098,.T.); +#75137 = PLANE('',#75138); +#75138 = AXIS2_PLACEMENT_3D('',#75139,#75140,#75141); +#75139 = CARTESIAN_POINT('',(-2.312197727425,-1.15,0.2786641916)); +#75140 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75141 = DIRECTION('',(0.,0.,1.)); +#75142 = ADVANCED_FACE('',(#75143),#75154,.F.); +#75143 = FACE_BOUND('',#75144,.T.); +#75144 = EDGE_LOOP('',(#75145,#75146,#75147,#75153)); +#75145 = ORIENTED_EDGE('',*,*,#74874,.T.); +#75146 = ORIENTED_EDGE('',*,*,#74882,.T.); +#75147 = ORIENTED_EDGE('',*,*,#75148,.F.); +#75148 = EDGE_CURVE('',#74370,#74883,#75149,.T.); +#75149 = LINE('',#75150,#75151); +#75150 = CARTESIAN_POINT('',(-2.35,-1.75,1.25)); +#75151 = VECTOR('',#75152,1.); +#75152 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#75153 = ORIENTED_EDGE('',*,*,#74377,.F.); +#75154 = PLANE('',#75155); +#75155 = AXIS2_PLACEMENT_3D('',#75156,#75157,#75158); +#75156 = CARTESIAN_POINT('',(-2.35,-1.75,0.9)); +#75157 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#75158 = DIRECTION('',(0.,0.,-1.)); +#75159 = ADVANCED_FACE('',(#75160),#75178,.F.); +#75160 = FACE_BOUND('',#75161,.T.); +#75161 = EDGE_LOOP('',(#75162,#75163,#75171,#75177)); +#75162 = ORIENTED_EDGE('',*,*,#75148,.T.); +#75163 = ORIENTED_EDGE('',*,*,#75164,.T.); +#75164 = EDGE_CURVE('',#74883,#75165,#75167,.T.); +#75165 = VERTEX_POINT('',#75166); +#75166 = CARTESIAN_POINT('',(-1.7,-1.6,1.5)); +#75167 = LINE('',#75168,#75169); +#75168 = CARTESIAN_POINT('',(-1.7,-1.75,1.25)); +#75169 = VECTOR('',#75170,1.); +#75170 = DIRECTION('',(1.142410067494E-16,0.514495755428,0.857492925712) + ); +#75171 = ORIENTED_EDGE('',*,*,#75172,.F.); +#75172 = EDGE_CURVE('',#74362,#75165,#75173,.T.); +#75173 = LINE('',#75174,#75175); +#75174 = CARTESIAN_POINT('',(-2.35,-1.6,1.5)); +#75175 = VECTOR('',#75176,1.); +#75176 = DIRECTION('',(1.,0.,0.)); +#75177 = ORIENTED_EDGE('',*,*,#74369,.F.); +#75178 = PLANE('',#75179); +#75179 = AXIS2_PLACEMENT_3D('',#75180,#75181,#75182); +#75180 = CARTESIAN_POINT('',(-2.35,-1.75,1.25)); +#75181 = DIRECTION('',(1.904016779158E-16,0.857492925712,-0.514495755428 + )); +#75182 = DIRECTION('',(-1.142410067494E-16,-0.514495755428, + -0.857492925712)); +#75183 = ADVANCED_FACE('',(#75184),#75258,.T.); +#75184 = FACE_BOUND('',#75185,.T.); +#75185 = EDGE_LOOP('',(#75186,#75196,#75202,#75203,#75204,#75212,#75220, + #75228,#75236,#75244,#75252)); +#75186 = ORIENTED_EDGE('',*,*,#75187,.F.); +#75187 = EDGE_CURVE('',#75188,#75190,#75192,.T.); +#75188 = VERTEX_POINT('',#75189); +#75189 = CARTESIAN_POINT('',(-2.2,-0.4,1.5)); +#75190 = VERTEX_POINT('',#75191); +#75191 = CARTESIAN_POINT('',(-2.15,-0.4,1.5)); +#75192 = LINE('',#75193,#75194); +#75193 = CARTESIAN_POINT('',(-2.35,-0.4,1.5)); +#75194 = VECTOR('',#75195,1.); +#75195 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#75196 = ORIENTED_EDGE('',*,*,#75197,.T.); +#75197 = EDGE_CURVE('',#75188,#74354,#75198,.T.); +#75198 = LINE('',#75199,#75200); +#75199 = CARTESIAN_POINT('',(-1.1,-0.4,1.5)); +#75200 = VECTOR('',#75201,1.); +#75201 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75202 = ORIENTED_EDGE('',*,*,#74361,.T.); +#75203 = ORIENTED_EDGE('',*,*,#75172,.T.); +#75204 = ORIENTED_EDGE('',*,*,#75205,.T.); +#75205 = EDGE_CURVE('',#75165,#75206,#75208,.T.); +#75206 = VERTEX_POINT('',#75207); +#75207 = CARTESIAN_POINT('',(-1.7,-1.55,1.5)); +#75208 = LINE('',#75209,#75210); +#75209 = CARTESIAN_POINT('',(-1.7,-1.75,1.5)); +#75210 = VECTOR('',#75211,1.); +#75211 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#75212 = ORIENTED_EDGE('',*,*,#75213,.F.); +#75213 = EDGE_CURVE('',#75214,#75206,#75216,.T.); +#75214 = VERTEX_POINT('',#75215); +#75215 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#75216 = LINE('',#75217,#75218); +#75217 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#75218 = VECTOR('',#75219,1.); +#75219 = DIRECTION('',(1.,0.,0.)); +#75220 = ORIENTED_EDGE('',*,*,#75221,.F.); +#75221 = EDGE_CURVE('',#75222,#75214,#75224,.T.); +#75222 = VERTEX_POINT('',#75223); +#75223 = CARTESIAN_POINT('',(-2.15,-1.4,1.5)); +#75224 = LINE('',#75225,#75226); +#75225 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#75226 = VECTOR('',#75227,1.); +#75227 = DIRECTION('',(0.,-1.,0.)); +#75228 = ORIENTED_EDGE('',*,*,#75229,.F.); +#75229 = EDGE_CURVE('',#75230,#75222,#75232,.T.); +#75230 = VERTEX_POINT('',#75231); +#75231 = CARTESIAN_POINT('',(-2.3,-1.4,1.5)); +#75232 = LINE('',#75233,#75234); +#75233 = CARTESIAN_POINT('',(-2.3,-1.4,1.5)); +#75234 = VECTOR('',#75235,1.); +#75235 = DIRECTION('',(1.,0.,0.)); +#75236 = ORIENTED_EDGE('',*,*,#75237,.F.); +#75237 = EDGE_CURVE('',#75238,#75230,#75240,.T.); +#75238 = VERTEX_POINT('',#75239); +#75239 = CARTESIAN_POINT('',(-2.3,-0.9,1.5)); +#75240 = LINE('',#75241,#75242); +#75241 = CARTESIAN_POINT('',(-2.3,-0.9,1.5)); +#75242 = VECTOR('',#75243,1.); +#75243 = DIRECTION('',(-0.,-1.,-0.)); +#75244 = ORIENTED_EDGE('',*,*,#75245,.F.); +#75245 = EDGE_CURVE('',#75246,#75238,#75248,.T.); +#75246 = VERTEX_POINT('',#75247); +#75247 = CARTESIAN_POINT('',(-2.15,-0.9,1.5)); +#75248 = LINE('',#75249,#75250); +#75249 = CARTESIAN_POINT('',(-2.15,-0.9,1.5)); +#75250 = VECTOR('',#75251,1.); +#75251 = DIRECTION('',(-1.,-0.,-0.)); +#75252 = ORIENTED_EDGE('',*,*,#75253,.F.); +#75253 = EDGE_CURVE('',#75190,#75246,#75254,.T.); +#75254 = LINE('',#75255,#75256); +#75255 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#75256 = VECTOR('',#75257,1.); +#75257 = DIRECTION('',(0.,-1.,0.)); +#75258 = PLANE('',#75259); +#75259 = AXIS2_PLACEMENT_3D('',#75260,#75261,#75262); +#75260 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,1.5 + )); +#75261 = DIRECTION('',(0.,0.,1.)); +#75262 = DIRECTION('',(1.,0.,-0.)); +#75263 = ADVANCED_FACE('',(#75264),#75289,.F.); +#75264 = FACE_BOUND('',#75265,.F.); +#75265 = EDGE_LOOP('',(#75266,#75267,#75274,#75275,#75282,#75283)); +#75266 = ORIENTED_EDGE('',*,*,#74353,.F.); +#75267 = ORIENTED_EDGE('',*,*,#75268,.T.); +#75268 = EDGE_CURVE('',#74346,#74330,#75269,.T.); +#75269 = CIRCLE('',#75270,5.E-02); +#75270 = AXIS2_PLACEMENT_3D('',#75271,#75272,#75273); +#75271 = CARTESIAN_POINT('',(-2.35,-0.35,1.)); +#75272 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#75273 = DIRECTION('',(0.,0.,1.)); +#75274 = ORIENTED_EDGE('',*,*,#74329,.F.); +#75275 = ORIENTED_EDGE('',*,*,#75276,.F.); +#75276 = EDGE_CURVE('',#74306,#74322,#75277,.T.); +#75277 = CIRCLE('',#75278,5.E-02); +#75278 = AXIS2_PLACEMENT_3D('',#75279,#75280,#75281); +#75279 = CARTESIAN_POINT('',(-2.35,0.35,1.)); +#75280 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75281 = DIRECTION('',(0.,0.,1.)); +#75282 = ORIENTED_EDGE('',*,*,#74305,.F.); +#75283 = ORIENTED_EDGE('',*,*,#75284,.T.); +#75284 = EDGE_CURVE('',#74298,#74354,#75285,.T.); +#75285 = LINE('',#75286,#75287); +#75286 = CARTESIAN_POINT('',(-2.35,0.4,1.5)); +#75287 = VECTOR('',#75288,1.); +#75288 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75289 = PLANE('',#75290); +#75290 = AXIS2_PLACEMENT_3D('',#75291,#75292,#75293); +#75291 = CARTESIAN_POINT('',(-2.35,-0.2,1.225)); +#75292 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#75293 = DIRECTION('',(0.,0.,-1.)); +#75294 = ADVANCED_FACE('',(#75295),#75320,.T.); +#75295 = FACE_BOUND('',#75296,.T.); +#75296 = EDGE_LOOP('',(#75297,#75307,#75313,#75314)); +#75297 = ORIENTED_EDGE('',*,*,#75298,.F.); +#75298 = EDGE_CURVE('',#75299,#75301,#75303,.T.); +#75299 = VERTEX_POINT('',#75300); +#75300 = CARTESIAN_POINT('',(-2.2,-0.4,0.95)); +#75301 = VERTEX_POINT('',#75302); +#75302 = CARTESIAN_POINT('',(-2.2,-0.4,1.)); +#75303 = LINE('',#75304,#75305); +#75304 = CARTESIAN_POINT('',(-2.2,-0.4,0.95)); +#75305 = VECTOR('',#75306,1.); +#75306 = DIRECTION('',(0.,0.,1.)); +#75307 = ORIENTED_EDGE('',*,*,#75308,.T.); +#75308 = EDGE_CURVE('',#75299,#74338,#75309,.T.); +#75309 = LINE('',#75310,#75311); +#75310 = CARTESIAN_POINT('',(-2.2,-0.4,0.95)); +#75311 = VECTOR('',#75312,1.); +#75312 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75313 = ORIENTED_EDGE('',*,*,#74345,.T.); +#75314 = ORIENTED_EDGE('',*,*,#75315,.F.); +#75315 = EDGE_CURVE('',#75301,#74346,#75316,.T.); +#75316 = LINE('',#75317,#75318); +#75317 = CARTESIAN_POINT('',(-2.2,-0.4,1.)); +#75318 = VECTOR('',#75319,1.); +#75319 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75320 = PLANE('',#75321); +#75321 = AXIS2_PLACEMENT_3D('',#75322,#75323,#75324); +#75322 = CARTESIAN_POINT('',(-2.2,-0.4,0.95)); +#75323 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#75324 = DIRECTION('',(0.,-0.,1.)); +#75325 = ADVANCED_FACE('',(#75326),#75344,.T.); +#75326 = FACE_BOUND('',#75327,.T.); +#75327 = EDGE_LOOP('',(#75328,#75336,#75342,#75343)); +#75328 = ORIENTED_EDGE('',*,*,#75329,.F.); +#75329 = EDGE_CURVE('',#75330,#75299,#75332,.T.); +#75330 = VERTEX_POINT('',#75331); +#75331 = CARTESIAN_POINT('',(-2.2,-0.35,0.95)); +#75332 = LINE('',#75333,#75334); +#75333 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75334 = VECTOR('',#75335,1.); +#75335 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75336 = ORIENTED_EDGE('',*,*,#75337,.T.); +#75337 = EDGE_CURVE('',#75330,#74330,#75338,.T.); +#75338 = LINE('',#75339,#75340); +#75339 = CARTESIAN_POINT('',(-2.2,-0.35,0.95)); +#75340 = VECTOR('',#75341,1.); +#75341 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75342 = ORIENTED_EDGE('',*,*,#74337,.T.); +#75343 = ORIENTED_EDGE('',*,*,#75308,.F.); +#75344 = PLANE('',#75345); +#75345 = AXIS2_PLACEMENT_3D('',#75346,#75347,#75348); +#75346 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75347 = DIRECTION('',(0.,0.,1.)); +#75348 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75349 = ADVANCED_FACE('',(#75350),#75375,.T.); +#75350 = FACE_BOUND('',#75351,.T.); +#75351 = EDGE_LOOP('',(#75352,#75362,#75368,#75369)); +#75352 = ORIENTED_EDGE('',*,*,#75353,.F.); +#75353 = EDGE_CURVE('',#75354,#75356,#75358,.T.); +#75354 = VERTEX_POINT('',#75355); +#75355 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75356 = VERTEX_POINT('',#75357); +#75357 = CARTESIAN_POINT('',(-2.2,0.35,0.95)); +#75358 = LINE('',#75359,#75360); +#75359 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75360 = VECTOR('',#75361,1.); +#75361 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75362 = ORIENTED_EDGE('',*,*,#75363,.T.); +#75363 = EDGE_CURVE('',#75354,#74314,#75364,.T.); +#75364 = LINE('',#75365,#75366); +#75365 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75366 = VECTOR('',#75367,1.); +#75367 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75368 = ORIENTED_EDGE('',*,*,#74321,.T.); +#75369 = ORIENTED_EDGE('',*,*,#75370,.F.); +#75370 = EDGE_CURVE('',#75356,#74322,#75371,.T.); +#75371 = LINE('',#75372,#75373); +#75372 = CARTESIAN_POINT('',(-2.2,0.35,0.95)); +#75373 = VECTOR('',#75374,1.); +#75374 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75375 = PLANE('',#75376); +#75376 = AXIS2_PLACEMENT_3D('',#75377,#75378,#75379); +#75377 = CARTESIAN_POINT('',(-2.2,0.4,0.95)); +#75378 = DIRECTION('',(0.,0.,1.)); +#75379 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75380 = ADVANCED_FACE('',(#75381),#75399,.T.); +#75381 = FACE_BOUND('',#75382,.T.); +#75382 = EDGE_LOOP('',(#75383,#75391,#75397,#75398)); +#75383 = ORIENTED_EDGE('',*,*,#75384,.F.); +#75384 = EDGE_CURVE('',#75385,#75354,#75387,.T.); +#75385 = VERTEX_POINT('',#75386); +#75386 = CARTESIAN_POINT('',(-2.2,0.4,1.)); +#75387 = LINE('',#75388,#75389); +#75388 = CARTESIAN_POINT('',(-2.2,0.4,1.65)); +#75389 = VECTOR('',#75390,1.); +#75390 = DIRECTION('',(0.,0.,-1.)); +#75391 = ORIENTED_EDGE('',*,*,#75392,.T.); +#75392 = EDGE_CURVE('',#75385,#74306,#75393,.T.); +#75393 = LINE('',#75394,#75395); +#75394 = CARTESIAN_POINT('',(-2.2,0.4,1.)); +#75395 = VECTOR('',#75396,1.); +#75396 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75397 = ORIENTED_EDGE('',*,*,#74313,.T.); +#75398 = ORIENTED_EDGE('',*,*,#75363,.F.); +#75399 = PLANE('',#75400); +#75400 = AXIS2_PLACEMENT_3D('',#75401,#75402,#75403); +#75401 = CARTESIAN_POINT('',(-2.2,0.4,1.65)); +#75402 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75403 = DIRECTION('',(-0.,0.,-1.)); +#75404 = ADVANCED_FACE('',(#75405),#75486,.T.); +#75405 = FACE_BOUND('',#75406,.T.); +#75406 = EDGE_LOOP('',(#75407,#75417,#75423,#75424,#75432,#75440,#75448, + #75456,#75464,#75472,#75480)); +#75407 = ORIENTED_EDGE('',*,*,#75408,.F.); +#75408 = EDGE_CURVE('',#75409,#75411,#75413,.T.); +#75409 = VERTEX_POINT('',#75410); +#75410 = CARTESIAN_POINT('',(-1.7,1.6,1.5)); +#75411 = VERTEX_POINT('',#75412); +#75412 = CARTESIAN_POINT('',(-1.7,1.55,1.5)); +#75413 = LINE('',#75414,#75415); +#75414 = CARTESIAN_POINT('',(-1.7,1.75,1.5)); +#75415 = VECTOR('',#75416,1.); +#75416 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#75417 = ORIENTED_EDGE('',*,*,#75418,.T.); +#75418 = EDGE_CURVE('',#75409,#74290,#75419,.T.); +#75419 = LINE('',#75420,#75421); +#75420 = CARTESIAN_POINT('',(2.35,1.6,1.5)); +#75421 = VECTOR('',#75422,1.); +#75422 = DIRECTION('',(-1.,0.,0.)); +#75423 = ORIENTED_EDGE('',*,*,#74297,.T.); +#75424 = ORIENTED_EDGE('',*,*,#75425,.T.); +#75425 = EDGE_CURVE('',#74298,#75426,#75428,.T.); +#75426 = VERTEX_POINT('',#75427); +#75427 = CARTESIAN_POINT('',(-2.2,0.4,1.5)); +#75428 = LINE('',#75429,#75430); +#75429 = CARTESIAN_POINT('',(-1.1,0.4,1.5)); +#75430 = VECTOR('',#75431,1.); +#75431 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#75432 = ORIENTED_EDGE('',*,*,#75433,.T.); +#75433 = EDGE_CURVE('',#75426,#75434,#75436,.T.); +#75434 = VERTEX_POINT('',#75435); +#75435 = CARTESIAN_POINT('',(-2.15,0.4,1.5)); +#75436 = LINE('',#75437,#75438); +#75437 = CARTESIAN_POINT('',(-2.35,0.4,1.5)); +#75438 = VECTOR('',#75439,1.); +#75439 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#75440 = ORIENTED_EDGE('',*,*,#75441,.F.); +#75441 = EDGE_CURVE('',#75442,#75434,#75444,.T.); +#75442 = VERTEX_POINT('',#75443); +#75443 = CARTESIAN_POINT('',(-2.15,0.9,1.5)); +#75444 = LINE('',#75445,#75446); +#75445 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#75446 = VECTOR('',#75447,1.); +#75447 = DIRECTION('',(0.,-1.,0.)); +#75448 = ORIENTED_EDGE('',*,*,#75449,.F.); +#75449 = EDGE_CURVE('',#75450,#75442,#75452,.T.); +#75450 = VERTEX_POINT('',#75451); +#75451 = CARTESIAN_POINT('',(-2.3,0.9,1.5)); +#75452 = LINE('',#75453,#75454); +#75453 = CARTESIAN_POINT('',(-2.3,0.9,1.5)); +#75454 = VECTOR('',#75455,1.); +#75455 = DIRECTION('',(1.,0.,0.)); +#75456 = ORIENTED_EDGE('',*,*,#75457,.F.); +#75457 = EDGE_CURVE('',#75458,#75450,#75460,.T.); +#75458 = VERTEX_POINT('',#75459); +#75459 = CARTESIAN_POINT('',(-2.3,1.4,1.5)); +#75460 = LINE('',#75461,#75462); +#75461 = CARTESIAN_POINT('',(-2.3,1.4,1.5)); +#75462 = VECTOR('',#75463,1.); +#75463 = DIRECTION('',(-0.,-1.,-0.)); +#75464 = ORIENTED_EDGE('',*,*,#75465,.F.); +#75465 = EDGE_CURVE('',#75466,#75458,#75468,.T.); +#75466 = VERTEX_POINT('',#75467); +#75467 = CARTESIAN_POINT('',(-2.15,1.4,1.5)); +#75468 = LINE('',#75469,#75470); +#75469 = CARTESIAN_POINT('',(-2.15,1.4,1.5)); +#75470 = VECTOR('',#75471,1.); +#75471 = DIRECTION('',(-1.,-0.,-0.)); +#75472 = ORIENTED_EDGE('',*,*,#75473,.F.); +#75473 = EDGE_CURVE('',#75474,#75466,#75476,.T.); +#75474 = VERTEX_POINT('',#75475); +#75475 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#75476 = LINE('',#75477,#75478); +#75477 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#75478 = VECTOR('',#75479,1.); +#75479 = DIRECTION('',(0.,-1.,0.)); +#75480 = ORIENTED_EDGE('',*,*,#75481,.F.); +#75481 = EDGE_CURVE('',#75411,#75474,#75482,.T.); +#75482 = LINE('',#75483,#75484); +#75483 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#75484 = VECTOR('',#75485,1.); +#75485 = DIRECTION('',(-1.,0.,0.)); +#75486 = PLANE('',#75487); +#75487 = AXIS2_PLACEMENT_3D('',#75488,#75489,#75490); +#75488 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,1.5 + )); +#75489 = DIRECTION('',(0.,0.,1.)); +#75490 = DIRECTION('',(1.,0.,-0.)); +#75491 = ADVANCED_FACE('',(#75492),#75510,.F.); +#75492 = FACE_BOUND('',#75493,.F.); +#75493 = EDGE_LOOP('',(#75494,#75502,#75508,#75509)); +#75494 = ORIENTED_EDGE('',*,*,#75495,.T.); +#75495 = EDGE_CURVE('',#74282,#75496,#75498,.T.); +#75496 = VERTEX_POINT('',#75497); +#75497 = CARTESIAN_POINT('',(-1.7,1.75,1.25)); +#75498 = LINE('',#75499,#75500); +#75499 = CARTESIAN_POINT('',(-2.35,1.75,1.25)); +#75500 = VECTOR('',#75501,1.); +#75501 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#75502 = ORIENTED_EDGE('',*,*,#75503,.T.); +#75503 = EDGE_CURVE('',#75496,#75409,#75504,.T.); +#75504 = LINE('',#75505,#75506); +#75505 = CARTESIAN_POINT('',(-1.7,1.75,1.25)); +#75506 = VECTOR('',#75507,1.); +#75507 = DIRECTION('',(-5.712050337472E-17,-0.514495755428, + 0.857492925712)); +#75508 = ORIENTED_EDGE('',*,*,#75418,.T.); +#75509 = ORIENTED_EDGE('',*,*,#74289,.F.); +#75510 = PLANE('',#75511); +#75511 = AXIS2_PLACEMENT_3D('',#75512,#75513,#75514); +#75512 = CARTESIAN_POINT('',(-2.35,1.75,1.25)); +#75513 = DIRECTION('',(-9.520083895787E-17,-0.857492925712, + -0.514495755428)); +#75514 = DIRECTION('',(-5.712050337472E-17,-0.514495755428, + 0.857492925712)); +#75515 = ADVANCED_FACE('',(#75516),#75534,.F.); +#75516 = FACE_BOUND('',#75517,.F.); +#75517 = EDGE_LOOP('',(#75518,#75526,#75532,#75533)); +#75518 = ORIENTED_EDGE('',*,*,#75519,.T.); +#75519 = EDGE_CURVE('',#74274,#75520,#75522,.T.); +#75520 = VERTEX_POINT('',#75521); +#75521 = CARTESIAN_POINT('',(-1.7,1.75,0.9)); +#75522 = LINE('',#75523,#75524); +#75523 = CARTESIAN_POINT('',(-2.35,1.75,0.9)); +#75524 = VECTOR('',#75525,1.); +#75525 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#75526 = ORIENTED_EDGE('',*,*,#75527,.T.); +#75527 = EDGE_CURVE('',#75520,#75496,#75528,.T.); +#75528 = LINE('',#75529,#75530); +#75529 = CARTESIAN_POINT('',(-1.7,1.75,0.9)); +#75530 = VECTOR('',#75531,1.); +#75531 = DIRECTION('',(0.,0.,1.)); +#75532 = ORIENTED_EDGE('',*,*,#75495,.F.); +#75533 = ORIENTED_EDGE('',*,*,#74281,.F.); +#75534 = PLANE('',#75535); +#75535 = AXIS2_PLACEMENT_3D('',#75536,#75537,#75538); +#75536 = CARTESIAN_POINT('',(-2.35,1.75,0.9)); +#75537 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#75538 = DIRECTION('',(0.,0.,1.)); +#75539 = ADVANCED_FACE('',(#75540),#75558,.T.); +#75540 = FACE_BOUND('',#75541,.T.); +#75541 = EDGE_LOOP('',(#75542,#75543,#75544,#75552)); +#75542 = ORIENTED_EDGE('',*,*,#74265,.T.); +#75543 = ORIENTED_EDGE('',*,*,#74273,.T.); +#75544 = ORIENTED_EDGE('',*,*,#75545,.T.); +#75545 = EDGE_CURVE('',#74274,#75546,#75548,.T.); +#75546 = VERTEX_POINT('',#75547); +#75547 = CARTESIAN_POINT('',(-2.35,1.75,0.55)); +#75548 = LINE('',#75549,#75550); +#75549 = CARTESIAN_POINT('',(-2.35,1.75,0.9)); +#75550 = VECTOR('',#75551,1.); +#75551 = DIRECTION('',(0.,0.,-1.)); +#75552 = ORIENTED_EDGE('',*,*,#75553,.F.); +#75553 = EDGE_CURVE('',#74258,#75546,#75554,.T.); +#75554 = LINE('',#75555,#75556); +#75555 = CARTESIAN_POINT('',(-2.35,1.6,0.55)); +#75556 = VECTOR('',#75557,1.); +#75557 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#75558 = PLANE('',#75559); +#75559 = AXIS2_PLACEMENT_3D('',#75560,#75561,#75562); +#75560 = CARTESIAN_POINT('',(-2.35,1.6,0.9)); +#75561 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#75562 = DIRECTION('',(0.,0.,-1.)); +#75563 = ADVANCED_FACE('',(#75564),#75577,.T.); +#75564 = FACE_BOUND('',#75565,.T.); +#75565 = EDGE_LOOP('',(#75566,#75572,#75573,#75574,#75575,#75576)); +#75566 = ORIENTED_EDGE('',*,*,#75567,.F.); +#75567 = EDGE_CURVE('',#74959,#75022,#75568,.T.); +#75568 = LINE('',#75569,#75570); +#75569 = CARTESIAN_POINT('',(-2.40937330717,1.15,8.905996075495E-02)); +#75570 = VECTOR('',#75571,1.); +#75571 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75572 = ORIENTED_EDGE('',*,*,#74966,.T.); +#75573 = ORIENTED_EDGE('',*,*,#74553,.T.); +#75574 = ORIENTED_EDGE('',*,*,#74535,.T.); +#75575 = ORIENTED_EDGE('',*,*,#74520,.F.); +#75576 = ORIENTED_EDGE('',*,*,#75029,.F.); +#75577 = CYLINDRICAL_SURFACE('',#75578,0.2); +#75578 = AXIS2_PLACEMENT_3D('',#75579,#75580,#75581); +#75579 = CARTESIAN_POINT('',(-2.242963248302,0.85,0.2)); +#75580 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75581 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75582 = ADVANCED_FACE('',(#75583),#75602,.T.); +#75583 = FACE_BOUND('',#75584,.T.); +#75584 = EDGE_LOOP('',(#75585,#75586,#75595,#75601)); +#75585 = ORIENTED_EDGE('',*,*,#75553,.T.); +#75586 = ORIENTED_EDGE('',*,*,#75587,.T.); +#75587 = EDGE_CURVE('',#75546,#75588,#75590,.T.); +#75588 = VERTEX_POINT('',#75589); +#75589 = CARTESIAN_POINT('',(-2.25,1.75,0.45)); +#75590 = CIRCLE('',#75591,0.1); +#75591 = AXIS2_PLACEMENT_3D('',#75592,#75593,#75594); +#75592 = CARTESIAN_POINT('',(-2.25,1.75,0.55)); +#75593 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#75594 = DIRECTION('',(0.,0.,1.)); +#75595 = ORIENTED_EDGE('',*,*,#75596,.F.); +#75596 = EDGE_CURVE('',#74578,#75588,#75597,.T.); +#75597 = LINE('',#75598,#75599); +#75598 = CARTESIAN_POINT('',(-2.25,1.6,0.45)); +#75599 = VECTOR('',#75600,1.); +#75600 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#75601 = ORIENTED_EDGE('',*,*,#74585,.F.); +#75602 = CYLINDRICAL_SURFACE('',#75603,0.1); +#75603 = AXIS2_PLACEMENT_3D('',#75604,#75605,#75606); +#75604 = CARTESIAN_POINT('',(-2.25,1.6,0.55)); +#75605 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#75606 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#75607 = ADVANCED_FACE('',(#75608),#75619,.T.); +#75608 = FACE_BOUND('',#75609,.T.); +#75609 = EDGE_LOOP('',(#75610,#75611,#75612,#75618)); +#75610 = ORIENTED_EDGE('',*,*,#74577,.F.); +#75611 = ORIENTED_EDGE('',*,*,#75596,.T.); +#75612 = ORIENTED_EDGE('',*,*,#75613,.T.); +#75613 = EDGE_CURVE('',#75588,#74605,#75614,.T.); +#75614 = LINE('',#75615,#75616); +#75615 = CARTESIAN_POINT('',(-2.35,1.75,0.45)); +#75616 = VECTOR('',#75617,1.); +#75617 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#75618 = ORIENTED_EDGE('',*,*,#74612,.F.); +#75619 = PLANE('',#75620); +#75620 = AXIS2_PLACEMENT_3D('',#75621,#75622,#75623); +#75621 = CARTESIAN_POINT('',(-2.35,1.6,0.45)); +#75622 = DIRECTION('',(0.,0.,-1.)); +#75623 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#75624 = ADVANCED_FACE('',(#75625),#75636,.F.); +#75625 = FACE_BOUND('',#75626,.F.); +#75626 = EDGE_LOOP('',(#75627,#75628,#75629,#75635)); +#75627 = ORIENTED_EDGE('',*,*,#74708,.F.); +#75628 = ORIENTED_EDGE('',*,*,#74772,.T.); +#75629 = ORIENTED_EDGE('',*,*,#75630,.T.); +#75630 = EDGE_CURVE('',#74765,#74669,#75631,.T.); +#75631 = LINE('',#75632,#75633); +#75632 = CARTESIAN_POINT('',(0.5,-1.75,3.E-02)); +#75633 = VECTOR('',#75634,1.); +#75634 = DIRECTION('',(0.,1.,0.)); +#75635 = ORIENTED_EDGE('',*,*,#74676,.F.); +#75636 = PLANE('',#75637); +#75637 = AXIS2_PLACEMENT_3D('',#75638,#75639,#75640); +#75638 = CARTESIAN_POINT('',(-0.5,-1.75,3.E-02)); +#75639 = DIRECTION('',(0.,0.,1.)); +#75640 = DIRECTION('',(1.,0.,-0.)); +#75641 = ADVANCED_FACE('',(#75642),#75653,.F.); +#75642 = FACE_BOUND('',#75643,.F.); +#75643 = EDGE_LOOP('',(#75644,#75645,#75651,#75652)); +#75644 = ORIENTED_EDGE('',*,*,#74764,.F.); +#75645 = ORIENTED_EDGE('',*,*,#75646,.T.); +#75646 = EDGE_CURVE('',#74757,#74661,#75647,.T.); +#75647 = LINE('',#75648,#75649); +#75648 = CARTESIAN_POINT('',(0.5,-1.75,0.)); +#75649 = VECTOR('',#75650,1.); +#75650 = DIRECTION('',(0.,1.,0.)); +#75651 = ORIENTED_EDGE('',*,*,#74668,.T.); +#75652 = ORIENTED_EDGE('',*,*,#75630,.F.); +#75653 = PLANE('',#75654); +#75654 = AXIS2_PLACEMENT_3D('',#75655,#75656,#75657); +#75655 = CARTESIAN_POINT('',(0.5,-1.75,0.)); +#75656 = DIRECTION('',(1.,0.,0.)); +#75657 = DIRECTION('',(0.,0.,1.)); +#75658 = ADVANCED_FACE('',(#75659),#75798,.F.); +#75659 = FACE_BOUND('',#75660,.F.); +#75660 = EDGE_LOOP('',(#75661,#75662,#75663,#75664,#75672,#75680,#75688, + #75696,#75704,#75712,#75720,#75728,#75736,#75744,#75752,#75760, + #75768,#75776,#75784,#75792)); +#75661 = ORIENTED_EDGE('',*,*,#74660,.F.); +#75662 = ORIENTED_EDGE('',*,*,#75646,.F.); +#75663 = ORIENTED_EDGE('',*,*,#74756,.T.); +#75664 = ORIENTED_EDGE('',*,*,#75665,.T.); +#75665 = EDGE_CURVE('',#74749,#75666,#75668,.T.); +#75666 = VERTEX_POINT('',#75667); +#75667 = CARTESIAN_POINT('',(1.325,-1.6,0.)); +#75668 = LINE('',#75669,#75670); +#75669 = CARTESIAN_POINT('',(1.325,-1.75,0.)); +#75670 = VECTOR('',#75671,1.); +#75671 = DIRECTION('',(0.,1.,0.)); +#75672 = ORIENTED_EDGE('',*,*,#75673,.T.); +#75673 = EDGE_CURVE('',#75666,#75674,#75676,.T.); +#75674 = VERTEX_POINT('',#75675); +#75675 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#75676 = LINE('',#75677,#75678); +#75677 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#75678 = VECTOR('',#75679,1.); +#75679 = DIRECTION('',(1.,0.,0.)); +#75680 = ORIENTED_EDGE('',*,*,#75681,.T.); +#75681 = EDGE_CURVE('',#75674,#75682,#75684,.T.); +#75682 = VERTEX_POINT('',#75683); +#75683 = CARTESIAN_POINT('',(2.35,-1.15,0.)); +#75684 = LINE('',#75685,#75686); +#75685 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#75686 = VECTOR('',#75687,1.); +#75687 = DIRECTION('',(0.,1.,0.)); +#75688 = ORIENTED_EDGE('',*,*,#75689,.F.); +#75689 = EDGE_CURVE('',#75690,#75682,#75692,.T.); +#75690 = VERTEX_POINT('',#75691); +#75691 = CARTESIAN_POINT('',(2.242963248302,-1.15,5.551115123126E-17)); +#75692 = LINE('',#75693,#75694); +#75693 = CARTESIAN_POINT('',(1.85,-1.15,0.)); +#75694 = VECTOR('',#75695,1.); +#75695 = DIRECTION('',(1.,0.,0.)); +#75696 = ORIENTED_EDGE('',*,*,#75697,.F.); +#75697 = EDGE_CURVE('',#75698,#75690,#75700,.T.); +#75698 = VERTEX_POINT('',#75699); +#75699 = CARTESIAN_POINT('',(1.85,-1.15,0.)); +#75700 = LINE('',#75701,#75702); +#75701 = CARTESIAN_POINT('',(1.85,-1.15,0.)); +#75702 = VECTOR('',#75703,1.); +#75703 = DIRECTION('',(1.,0.,0.)); +#75704 = ORIENTED_EDGE('',*,*,#75705,.F.); +#75705 = EDGE_CURVE('',#75706,#75698,#75708,.T.); +#75706 = VERTEX_POINT('',#75707); +#75707 = CARTESIAN_POINT('',(1.85,-0.55,0.)); +#75708 = LINE('',#75709,#75710); +#75709 = CARTESIAN_POINT('',(1.85,-0.55,0.)); +#75710 = VECTOR('',#75711,1.); +#75711 = DIRECTION('',(0.,-1.,0.)); +#75712 = ORIENTED_EDGE('',*,*,#75713,.F.); +#75713 = EDGE_CURVE('',#75714,#75706,#75716,.T.); +#75714 = VERTEX_POINT('',#75715); +#75715 = CARTESIAN_POINT('',(2.242963248302,-0.55,5.551115123126E-17)); +#75716 = LINE('',#75717,#75718); +#75717 = CARTESIAN_POINT('',(2.75,-0.55,0.)); +#75718 = VECTOR('',#75719,1.); +#75719 = DIRECTION('',(-1.,0.,0.)); +#75720 = ORIENTED_EDGE('',*,*,#75721,.F.); +#75721 = EDGE_CURVE('',#75722,#75714,#75724,.T.); +#75722 = VERTEX_POINT('',#75723); +#75723 = CARTESIAN_POINT('',(2.35,-0.55,0.)); +#75724 = LINE('',#75725,#75726); +#75725 = CARTESIAN_POINT('',(2.75,-0.55,0.)); +#75726 = VECTOR('',#75727,1.); +#75727 = DIRECTION('',(-1.,0.,0.)); +#75728 = ORIENTED_EDGE('',*,*,#75729,.T.); +#75729 = EDGE_CURVE('',#75722,#75730,#75732,.T.); +#75730 = VERTEX_POINT('',#75731); +#75731 = CARTESIAN_POINT('',(2.35,0.55,0.)); +#75732 = LINE('',#75733,#75734); +#75733 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#75734 = VECTOR('',#75735,1.); +#75735 = DIRECTION('',(0.,1.,0.)); +#75736 = ORIENTED_EDGE('',*,*,#75737,.F.); +#75737 = EDGE_CURVE('',#75738,#75730,#75740,.T.); +#75738 = VERTEX_POINT('',#75739); +#75739 = CARTESIAN_POINT('',(2.242963248302,0.55,5.551115123126E-17)); +#75740 = LINE('',#75741,#75742); +#75741 = CARTESIAN_POINT('',(1.85,0.55,0.)); +#75742 = VECTOR('',#75743,1.); +#75743 = DIRECTION('',(1.,0.,0.)); +#75744 = ORIENTED_EDGE('',*,*,#75745,.F.); +#75745 = EDGE_CURVE('',#75746,#75738,#75748,.T.); +#75746 = VERTEX_POINT('',#75747); +#75747 = CARTESIAN_POINT('',(1.85,0.55,0.)); +#75748 = LINE('',#75749,#75750); +#75749 = CARTESIAN_POINT('',(1.85,0.55,0.)); +#75750 = VECTOR('',#75751,1.); +#75751 = DIRECTION('',(1.,0.,0.)); +#75752 = ORIENTED_EDGE('',*,*,#75753,.F.); +#75753 = EDGE_CURVE('',#75754,#75746,#75756,.T.); +#75754 = VERTEX_POINT('',#75755); +#75755 = CARTESIAN_POINT('',(1.85,1.15,0.)); +#75756 = LINE('',#75757,#75758); +#75757 = CARTESIAN_POINT('',(1.85,1.15,0.)); +#75758 = VECTOR('',#75759,1.); +#75759 = DIRECTION('',(0.,-1.,0.)); +#75760 = ORIENTED_EDGE('',*,*,#75761,.F.); +#75761 = EDGE_CURVE('',#75762,#75754,#75764,.T.); +#75762 = VERTEX_POINT('',#75763); +#75763 = CARTESIAN_POINT('',(2.242963248302,1.15,5.551115123126E-17)); +#75764 = LINE('',#75765,#75766); +#75765 = CARTESIAN_POINT('',(2.75,1.15,0.)); +#75766 = VECTOR('',#75767,1.); +#75767 = DIRECTION('',(-1.,0.,0.)); +#75768 = ORIENTED_EDGE('',*,*,#75769,.F.); +#75769 = EDGE_CURVE('',#75770,#75762,#75772,.T.); +#75770 = VERTEX_POINT('',#75771); +#75771 = CARTESIAN_POINT('',(2.35,1.15,0.)); +#75772 = LINE('',#75773,#75774); +#75773 = CARTESIAN_POINT('',(2.75,1.15,0.)); +#75774 = VECTOR('',#75775,1.); +#75775 = DIRECTION('',(-1.,0.,0.)); +#75776 = ORIENTED_EDGE('',*,*,#75777,.T.); +#75777 = EDGE_CURVE('',#75770,#75778,#75780,.T.); +#75778 = VERTEX_POINT('',#75779); +#75779 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#75780 = LINE('',#75781,#75782); +#75781 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#75782 = VECTOR('',#75783,1.); +#75783 = DIRECTION('',(0.,1.,0.)); +#75784 = ORIENTED_EDGE('',*,*,#75785,.T.); +#75785 = EDGE_CURVE('',#75778,#75786,#75788,.T.); +#75786 = VERTEX_POINT('',#75787); +#75787 = CARTESIAN_POINT('',(1.325,1.6,0.)); +#75788 = LINE('',#75789,#75790); +#75789 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#75790 = VECTOR('',#75791,1.); +#75791 = DIRECTION('',(-1.,0.,0.)); +#75792 = ORIENTED_EDGE('',*,*,#75793,.T.); +#75793 = EDGE_CURVE('',#75786,#74653,#75794,.T.); +#75794 = LINE('',#75795,#75796); +#75795 = CARTESIAN_POINT('',(1.325,1.6,0.)); +#75796 = VECTOR('',#75797,1.); +#75797 = DIRECTION('',(0.,1.,0.)); +#75798 = PLANE('',#75799); +#75799 = AXIS2_PLACEMENT_3D('',#75800,#75801,#75802); +#75800 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,0.) + ); +#75801 = DIRECTION('',(0.,0.,1.)); +#75802 = DIRECTION('',(1.,0.,-0.)); +#75803 = ADVANCED_FACE('',(#75804),#75822,.T.); +#75804 = FACE_BOUND('',#75805,.T.); +#75805 = EDGE_LOOP('',(#75806,#75814,#75815,#75816)); +#75806 = ORIENTED_EDGE('',*,*,#75807,.F.); +#75807 = EDGE_CURVE('',#75786,#75808,#75810,.T.); +#75808 = VERTEX_POINT('',#75809); +#75809 = CARTESIAN_POINT('',(1.325,1.6,0.45)); +#75810 = LINE('',#75811,#75812); +#75811 = CARTESIAN_POINT('',(1.325,1.6,0.)); +#75812 = VECTOR('',#75813,1.); +#75813 = DIRECTION('',(0.,0.,1.)); +#75814 = ORIENTED_EDGE('',*,*,#75793,.T.); +#75815 = ORIENTED_EDGE('',*,*,#74652,.T.); +#75816 = ORIENTED_EDGE('',*,*,#75817,.F.); +#75817 = EDGE_CURVE('',#75808,#74645,#75818,.T.); +#75818 = LINE('',#75819,#75820); +#75819 = CARTESIAN_POINT('',(1.325,1.6,0.45)); +#75820 = VECTOR('',#75821,1.); +#75821 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#75822 = PLANE('',#75823); +#75823 = AXIS2_PLACEMENT_3D('',#75824,#75825,#75826); +#75824 = CARTESIAN_POINT('',(1.325,1.6,0.)); +#75825 = DIRECTION('',(1.,0.,0.)); +#75826 = DIRECTION('',(0.,0.,1.)); +#75827 = ADVANCED_FACE('',(#75828),#75901,.F.); +#75828 = FACE_BOUND('',#75829,.F.); +#75829 = EDGE_LOOP('',(#75830,#75831,#75832,#75833,#75834,#75835,#75836, + #75844,#75853,#75861,#75869,#75877,#75885,#75893,#75899,#75900)); +#75830 = ORIENTED_EDGE('',*,*,#75545,.T.); +#75831 = ORIENTED_EDGE('',*,*,#75587,.T.); +#75832 = ORIENTED_EDGE('',*,*,#75613,.T.); +#75833 = ORIENTED_EDGE('',*,*,#74628,.T.); +#75834 = ORIENTED_EDGE('',*,*,#74636,.T.); +#75835 = ORIENTED_EDGE('',*,*,#74644,.F.); +#75836 = ORIENTED_EDGE('',*,*,#75837,.F.); +#75837 = EDGE_CURVE('',#75838,#74645,#75840,.T.); +#75838 = VERTEX_POINT('',#75839); +#75839 = CARTESIAN_POINT('',(2.25,1.75,0.45)); +#75840 = LINE('',#75841,#75842); +#75841 = CARTESIAN_POINT('',(2.35,1.75,0.45)); +#75842 = VECTOR('',#75843,1.); +#75843 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#75844 = ORIENTED_EDGE('',*,*,#75845,.F.); +#75845 = EDGE_CURVE('',#75846,#75838,#75848,.T.); +#75846 = VERTEX_POINT('',#75847); +#75847 = CARTESIAN_POINT('',(2.35,1.75,0.55)); +#75848 = CIRCLE('',#75849,0.1); +#75849 = AXIS2_PLACEMENT_3D('',#75850,#75851,#75852); +#75850 = CARTESIAN_POINT('',(2.25,1.75,0.55)); +#75851 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#75852 = DIRECTION('',(0.,0.,1.)); +#75853 = ORIENTED_EDGE('',*,*,#75854,.F.); +#75854 = EDGE_CURVE('',#75855,#75846,#75857,.T.); +#75855 = VERTEX_POINT('',#75856); +#75856 = CARTESIAN_POINT('',(2.35,1.75,0.9)); +#75857 = LINE('',#75858,#75859); +#75858 = CARTESIAN_POINT('',(2.35,1.75,0.9)); +#75859 = VECTOR('',#75860,1.); +#75860 = DIRECTION('',(0.,0.,-1.)); +#75861 = ORIENTED_EDGE('',*,*,#75862,.T.); +#75862 = EDGE_CURVE('',#75855,#75863,#75865,.T.); +#75863 = VERTEX_POINT('',#75864); +#75864 = CARTESIAN_POINT('',(1.7,1.75,0.9)); +#75865 = LINE('',#75866,#75867); +#75866 = CARTESIAN_POINT('',(2.35,1.75,0.9)); +#75867 = VECTOR('',#75868,1.); +#75868 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#75869 = ORIENTED_EDGE('',*,*,#75870,.T.); +#75870 = EDGE_CURVE('',#75863,#75871,#75873,.T.); +#75871 = VERTEX_POINT('',#75872); +#75872 = CARTESIAN_POINT('',(1.7,1.75,1.25)); +#75873 = LINE('',#75874,#75875); +#75874 = CARTESIAN_POINT('',(1.7,1.75,0.9)); +#75875 = VECTOR('',#75876,1.); +#75876 = DIRECTION('',(0.,0.,1.)); +#75877 = ORIENTED_EDGE('',*,*,#75878,.F.); +#75878 = EDGE_CURVE('',#75879,#75871,#75881,.T.); +#75879 = VERTEX_POINT('',#75880); +#75880 = CARTESIAN_POINT('',(1.7,1.75,1.5)); +#75881 = LINE('',#75882,#75883); +#75882 = CARTESIAN_POINT('',(1.7,1.75,1.5)); +#75883 = VECTOR('',#75884,1.); +#75884 = DIRECTION('',(0.,0.,-1.)); +#75885 = ORIENTED_EDGE('',*,*,#75886,.F.); +#75886 = EDGE_CURVE('',#75887,#75879,#75889,.T.); +#75887 = VERTEX_POINT('',#75888); +#75888 = CARTESIAN_POINT('',(-1.7,1.75,1.5)); +#75889 = LINE('',#75890,#75891); +#75890 = CARTESIAN_POINT('',(-1.7,1.75,1.5)); +#75891 = VECTOR('',#75892,1.); +#75892 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#75893 = ORIENTED_EDGE('',*,*,#75894,.T.); +#75894 = EDGE_CURVE('',#75887,#75496,#75895,.T.); +#75895 = LINE('',#75896,#75897); +#75896 = CARTESIAN_POINT('',(-1.7,1.75,1.5)); +#75897 = VECTOR('',#75898,1.); +#75898 = DIRECTION('',(0.,0.,-1.)); +#75899 = ORIENTED_EDGE('',*,*,#75527,.F.); +#75900 = ORIENTED_EDGE('',*,*,#75519,.F.); +#75901 = PLANE('',#75902); +#75902 = AXIS2_PLACEMENT_3D('',#75903,#75904,#75905); +#75903 = CARTESIAN_POINT('',(-1.244301470588,1.75,1.044301470588)); +#75904 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#75905 = DIRECTION('',(0.,0.,-1.)); +#75906 = ADVANCED_FACE('',(#75907),#75925,.T.); +#75907 = FACE_BOUND('',#75908,.T.); +#75908 = EDGE_LOOP('',(#75909,#75910,#75911,#75919)); +#75909 = ORIENTED_EDGE('',*,*,#74748,.F.); +#75910 = ORIENTED_EDGE('',*,*,#75665,.T.); +#75911 = ORIENTED_EDGE('',*,*,#75912,.T.); +#75912 = EDGE_CURVE('',#75666,#75913,#75915,.T.); +#75913 = VERTEX_POINT('',#75914); +#75914 = CARTESIAN_POINT('',(1.325,-1.6,0.45)); +#75915 = LINE('',#75916,#75917); +#75916 = CARTESIAN_POINT('',(1.325,-1.6,0.)); +#75917 = VECTOR('',#75918,1.); +#75918 = DIRECTION('',(0.,0.,1.)); +#75919 = ORIENTED_EDGE('',*,*,#75920,.T.); +#75920 = EDGE_CURVE('',#75913,#74741,#75921,.T.); +#75921 = LINE('',#75922,#75923); +#75922 = CARTESIAN_POINT('',(1.325,-1.6,0.45)); +#75923 = VECTOR('',#75924,1.); +#75924 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#75925 = PLANE('',#75926); +#75926 = AXIS2_PLACEMENT_3D('',#75927,#75928,#75929); +#75927 = CARTESIAN_POINT('',(1.325,-1.75,0.)); +#75928 = DIRECTION('',(1.,0.,0.)); +#75929 = DIRECTION('',(0.,0.,1.)); +#75930 = ADVANCED_FACE('',(#75931),#75944,.T.); +#75931 = FACE_BOUND('',#75932,.T.); +#75932 = EDGE_LOOP('',(#75933,#75939,#75940,#75941,#75942,#75943)); +#75933 = ORIENTED_EDGE('',*,*,#75934,.F.); +#75934 = EDGE_CURVE('',#75058,#75121,#75935,.T.); +#75935 = LINE('',#75936,#75937); +#75936 = CARTESIAN_POINT('',(-2.40937330717,-0.55,8.905996075495E-02)); +#75937 = VECTOR('',#75938,1.); +#75938 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75939 = ORIENTED_EDGE('',*,*,#75065,.T.); +#75940 = ORIENTED_EDGE('',*,*,#74822,.T.); +#75941 = ORIENTED_EDGE('',*,*,#74804,.T.); +#75942 = ORIENTED_EDGE('',*,*,#74789,.F.); +#75943 = ORIENTED_EDGE('',*,*,#75128,.F.); +#75944 = CYLINDRICAL_SURFACE('',#75945,0.2); +#75945 = AXIS2_PLACEMENT_3D('',#75946,#75947,#75948); +#75946 = CARTESIAN_POINT('',(-2.242963248302,-0.85,0.2)); +#75947 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#75948 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#75949 = ADVANCED_FACE('',(#75950),#75975,.T.); +#75950 = FACE_BOUND('',#75951,.T.); +#75951 = EDGE_LOOP('',(#75952,#75962,#75968,#75969)); +#75952 = ORIENTED_EDGE('',*,*,#75953,.T.); +#75953 = EDGE_CURVE('',#75954,#75956,#75958,.T.); +#75954 = VERTEX_POINT('',#75955); +#75955 = CARTESIAN_POINT('',(2.35,-1.6,0.55)); +#75956 = VERTEX_POINT('',#75957); +#75957 = CARTESIAN_POINT('',(2.35,-1.6,0.9)); +#75958 = LINE('',#75959,#75960); +#75959 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#75960 = VECTOR('',#75961,1.); +#75961 = DIRECTION('',(0.,0.,1.)); +#75962 = ORIENTED_EDGE('',*,*,#75963,.T.); +#75963 = EDGE_CURVE('',#75956,#74839,#75964,.T.); +#75964 = LINE('',#75965,#75966); +#75965 = CARTESIAN_POINT('',(2.35,-1.6,0.9)); +#75966 = VECTOR('',#75967,1.); +#75967 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#75968 = ORIENTED_EDGE('',*,*,#74838,.T.); +#75969 = ORIENTED_EDGE('',*,*,#75970,.F.); +#75970 = EDGE_CURVE('',#75954,#74841,#75971,.T.); +#75971 = LINE('',#75972,#75973); +#75972 = CARTESIAN_POINT('',(2.35,-1.6,0.55)); +#75973 = VECTOR('',#75974,1.); +#75974 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#75975 = PLANE('',#75976); +#75976 = AXIS2_PLACEMENT_3D('',#75977,#75978,#75979); +#75977 = CARTESIAN_POINT('',(2.35,-1.6,0.9)); +#75978 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#75979 = DIRECTION('',(0.,0.,-1.)); +#75980 = ADVANCED_FACE('',(#75981),#76000,.T.); +#75981 = FACE_BOUND('',#75982,.T.); +#75982 = EDGE_LOOP('',(#75983,#75984,#75985,#75993)); +#75983 = ORIENTED_EDGE('',*,*,#75970,.T.); +#75984 = ORIENTED_EDGE('',*,*,#74848,.T.); +#75985 = ORIENTED_EDGE('',*,*,#75986,.F.); +#75986 = EDGE_CURVE('',#75987,#74849,#75989,.T.); +#75987 = VERTEX_POINT('',#75988); +#75988 = CARTESIAN_POINT('',(2.25,-1.6,0.45)); +#75989 = LINE('',#75990,#75991); +#75990 = CARTESIAN_POINT('',(2.25,-1.6,0.45)); +#75991 = VECTOR('',#75992,1.); +#75992 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#75993 = ORIENTED_EDGE('',*,*,#75994,.F.); +#75994 = EDGE_CURVE('',#75954,#75987,#75995,.T.); +#75995 = CIRCLE('',#75996,0.1); +#75996 = AXIS2_PLACEMENT_3D('',#75997,#75998,#75999); +#75997 = CARTESIAN_POINT('',(2.25,-1.6,0.55)); +#75998 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#75999 = DIRECTION('',(0.,0.,1.)); +#76000 = CYLINDRICAL_SURFACE('',#76001,0.1); +#76001 = AXIS2_PLACEMENT_3D('',#76002,#76003,#76004); +#76002 = CARTESIAN_POINT('',(2.25,-1.6,0.55)); +#76003 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#76004 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#76005 = ADVANCED_FACE('',(#76006),#76017,.T.); +#76006 = FACE_BOUND('',#76007,.T.); +#76007 = EDGE_LOOP('',(#76008,#76014,#76015,#76016)); +#76008 = ORIENTED_EDGE('',*,*,#76009,.F.); +#76009 = EDGE_CURVE('',#75987,#75913,#76010,.T.); +#76010 = LINE('',#76011,#76012); +#76011 = CARTESIAN_POINT('',(2.35,-1.6,0.45)); +#76012 = VECTOR('',#76013,1.); +#76013 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#76014 = ORIENTED_EDGE('',*,*,#75986,.T.); +#76015 = ORIENTED_EDGE('',*,*,#74857,.T.); +#76016 = ORIENTED_EDGE('',*,*,#75920,.F.); +#76017 = PLANE('',#76018); +#76018 = AXIS2_PLACEMENT_3D('',#76019,#76020,#76021); +#76019 = CARTESIAN_POINT('',(2.35,-1.6,0.45)); +#76020 = DIRECTION('',(0.,0.,-1.)); +#76021 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#76022 = ADVANCED_FACE('',(#76023),#76051,.T.); +#76023 = FACE_BOUND('',#76024,.F.); +#76024 = EDGE_LOOP('',(#76025,#76026,#76027,#76035,#76043,#76050)); +#76025 = ORIENTED_EDGE('',*,*,#75164,.T.); +#76026 = ORIENTED_EDGE('',*,*,#75205,.T.); +#76027 = ORIENTED_EDGE('',*,*,#76028,.T.); +#76028 = EDGE_CURVE('',#75206,#76029,#76031,.T.); +#76029 = VERTEX_POINT('',#76030); +#76030 = CARTESIAN_POINT('',(-1.7,-1.55,1.65)); +#76031 = LINE('',#76032,#76033); +#76032 = CARTESIAN_POINT('',(-1.7,-1.55,1.5)); +#76033 = VECTOR('',#76034,1.); +#76034 = DIRECTION('',(0.,0.,1.)); +#76035 = ORIENTED_EDGE('',*,*,#76036,.T.); +#76036 = EDGE_CURVE('',#76029,#76037,#76039,.T.); +#76037 = VERTEX_POINT('',#76038); +#76038 = CARTESIAN_POINT('',(-1.7,-1.6,1.65)); +#76039 = LINE('',#76040,#76041); +#76040 = CARTESIAN_POINT('',(-1.7,-1.55,1.65)); +#76041 = VECTOR('',#76042,1.); +#76042 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#76043 = ORIENTED_EDGE('',*,*,#76044,.T.); +#76044 = EDGE_CURVE('',#76037,#74891,#76045,.T.); +#76045 = CIRCLE('',#76046,0.15); +#76046 = AXIS2_PLACEMENT_3D('',#76047,#76048,#76049); +#76047 = CARTESIAN_POINT('',(-1.7,-1.6,1.5)); +#76048 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#76049 = DIRECTION('',(0.,0.,1.)); +#76050 = ORIENTED_EDGE('',*,*,#74890,.T.); +#76051 = PLANE('',#76052); +#76052 = AXIS2_PLACEMENT_3D('',#76053,#76054,#76055); +#76053 = CARTESIAN_POINT('',(-1.7,-1.6,1.5)); +#76054 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#76055 = DIRECTION('',(0.,0.,1.)); +#76056 = ADVANCED_FACE('',(#76057),#76076,.T.); +#76057 = FACE_BOUND('',#76058,.T.); +#76058 = EDGE_LOOP('',(#76059,#76067,#76068,#76069)); +#76059 = ORIENTED_EDGE('',*,*,#76060,.T.); +#76060 = EDGE_CURVE('',#76061,#76037,#76063,.T.); +#76061 = VERTEX_POINT('',#76062); +#76062 = CARTESIAN_POINT('',(1.7,-1.6,1.65)); +#76063 = LINE('',#76064,#76065); +#76064 = CARTESIAN_POINT('',(1.7,-1.6,1.65)); +#76065 = VECTOR('',#76066,1.); +#76066 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#76067 = ORIENTED_EDGE('',*,*,#76044,.T.); +#76068 = ORIENTED_EDGE('',*,*,#74898,.F.); +#76069 = ORIENTED_EDGE('',*,*,#76070,.F.); +#76070 = EDGE_CURVE('',#76061,#74899,#76071,.T.); +#76071 = CIRCLE('',#76072,0.15); +#76072 = AXIS2_PLACEMENT_3D('',#76073,#76074,#76075); +#76073 = CARTESIAN_POINT('',(1.7,-1.6,1.5)); +#76074 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#76075 = DIRECTION('',(0.,0.,1.)); +#76076 = CYLINDRICAL_SURFACE('',#76077,0.15); +#76077 = AXIS2_PLACEMENT_3D('',#76078,#76079,#76080); +#76078 = CARTESIAN_POINT('',(0.85,-1.6,1.5)); +#76079 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#76080 = DIRECTION('',(0.,0.,1.)); +#76081 = ADVANCED_FACE('',(#76082),#76116,.T.); +#76082 = FACE_BOUND('',#76083,.T.); +#76083 = EDGE_LOOP('',(#76084,#76092,#76100,#76108,#76114,#76115)); +#76084 = ORIENTED_EDGE('',*,*,#76085,.T.); +#76085 = EDGE_CURVE('',#74907,#76086,#76088,.T.); +#76086 = VERTEX_POINT('',#76087); +#76087 = CARTESIAN_POINT('',(1.7,-1.6,1.5)); +#76088 = LINE('',#76089,#76090); +#76089 = CARTESIAN_POINT('',(1.7,-1.75,1.25)); +#76090 = VECTOR('',#76091,1.); +#76091 = DIRECTION('',(1.142410067494E-16,0.514495755428,0.857492925712) + ); +#76092 = ORIENTED_EDGE('',*,*,#76093,.T.); +#76093 = EDGE_CURVE('',#76086,#76094,#76096,.T.); +#76094 = VERTEX_POINT('',#76095); +#76095 = CARTESIAN_POINT('',(1.7,-1.55,1.5)); +#76096 = LINE('',#76097,#76098); +#76097 = CARTESIAN_POINT('',(1.7,-1.75,1.5)); +#76098 = VECTOR('',#76099,1.); +#76099 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#76100 = ORIENTED_EDGE('',*,*,#76101,.T.); +#76101 = EDGE_CURVE('',#76094,#76102,#76104,.T.); +#76102 = VERTEX_POINT('',#76103); +#76103 = CARTESIAN_POINT('',(1.7,-1.55,1.65)); +#76104 = LINE('',#76105,#76106); +#76105 = CARTESIAN_POINT('',(1.7,-1.55,1.5)); +#76106 = VECTOR('',#76107,1.); +#76107 = DIRECTION('',(0.,0.,1.)); +#76108 = ORIENTED_EDGE('',*,*,#76109,.T.); +#76109 = EDGE_CURVE('',#76102,#76061,#76110,.T.); +#76110 = LINE('',#76111,#76112); +#76111 = CARTESIAN_POINT('',(1.7,-1.55,1.65)); +#76112 = VECTOR('',#76113,1.); +#76113 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#76114 = ORIENTED_EDGE('',*,*,#76070,.T.); +#76115 = ORIENTED_EDGE('',*,*,#74906,.T.); +#76116 = PLANE('',#76117); +#76117 = AXIS2_PLACEMENT_3D('',#76118,#76119,#76120); +#76118 = CARTESIAN_POINT('',(1.7,-1.6,1.5)); +#76119 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#76120 = DIRECTION('',(0.,0.,-1.)); +#76121 = ADVANCED_FACE('',(#76122),#76140,.F.); +#76122 = FACE_BOUND('',#76123,.F.); +#76123 = EDGE_LOOP('',(#76124,#76125,#76126,#76134)); +#76124 = ORIENTED_EDGE('',*,*,#74922,.T.); +#76125 = ORIENTED_EDGE('',*,*,#74914,.T.); +#76126 = ORIENTED_EDGE('',*,*,#76127,.F.); +#76127 = EDGE_CURVE('',#76128,#74907,#76130,.T.); +#76128 = VERTEX_POINT('',#76129); +#76129 = CARTESIAN_POINT('',(2.35,-1.75,1.25)); +#76130 = LINE('',#76131,#76132); +#76131 = CARTESIAN_POINT('',(2.35,-1.75,1.25)); +#76132 = VECTOR('',#76133,1.); +#76133 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#76134 = ORIENTED_EDGE('',*,*,#76135,.F.); +#76135 = EDGE_CURVE('',#74839,#76128,#76136,.T.); +#76136 = LINE('',#76137,#76138); +#76137 = CARTESIAN_POINT('',(2.35,-1.75,0.9)); +#76138 = VECTOR('',#76139,1.); +#76139 = DIRECTION('',(0.,0.,1.)); +#76140 = PLANE('',#76141); +#76141 = AXIS2_PLACEMENT_3D('',#76142,#76143,#76144); +#76142 = CARTESIAN_POINT('',(2.35,-1.75,0.9)); +#76143 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#76144 = DIRECTION('',(0.,-0.,1.)); +#76145 = ADVANCED_FACE('',(#76146),#76157,.T.); +#76146 = FACE_BOUND('',#76147,.T.); +#76147 = EDGE_LOOP('',(#76148,#76149,#76155,#76156)); +#76148 = ORIENTED_EDGE('',*,*,#74948,.T.); +#76149 = ORIENTED_EDGE('',*,*,#76150,.F.); +#76150 = EDGE_CURVE('',#75014,#74951,#76151,.T.); +#76151 = LINE('',#76152,#76153); +#76152 = CARTESIAN_POINT('',(-2.75,0.55,0.6)); +#76153 = VECTOR('',#76154,1.); +#76154 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#76155 = ORIENTED_EDGE('',*,*,#75013,.F.); +#76156 = ORIENTED_EDGE('',*,*,#74991,.T.); +#76157 = PLANE('',#76158); +#76158 = AXIS2_PLACEMENT_3D('',#76159,#76160,#76161); +#76159 = CARTESIAN_POINT('',(-2.583589941132,0.85,0.710940039245)); +#76160 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#76161 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#76162 = ADVANCED_FACE('',(#76163),#76169,.T.); +#76163 = FACE_BOUND('',#76164,.T.); +#76164 = EDGE_LOOP('',(#76165,#76166,#76167,#76168)); +#76165 = ORIENTED_EDGE('',*,*,#74958,.T.); +#76166 = ORIENTED_EDGE('',*,*,#75567,.T.); +#76167 = ORIENTED_EDGE('',*,*,#75021,.F.); +#76168 = ORIENTED_EDGE('',*,*,#76150,.T.); +#76169 = PLANE('',#76170); +#76170 = AXIS2_PLACEMENT_3D('',#76171,#76172,#76173); +#76171 = CARTESIAN_POINT('',(-2.75,0.85,0.6)); +#76172 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#76173 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#76174 = ADVANCED_FACE('',(#76175),#76186,.T.); +#76175 = FACE_BOUND('',#76176,.T.); +#76176 = EDGE_LOOP('',(#76177,#76178,#76184,#76185)); +#76177 = ORIENTED_EDGE('',*,*,#75047,.T.); +#76178 = ORIENTED_EDGE('',*,*,#76179,.F.); +#76179 = EDGE_CURVE('',#75113,#75050,#76180,.T.); +#76180 = LINE('',#76181,#76182); +#76181 = CARTESIAN_POINT('',(-2.75,-1.15,0.6)); +#76182 = VECTOR('',#76183,1.); +#76183 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#76184 = ORIENTED_EDGE('',*,*,#75112,.F.); +#76185 = ORIENTED_EDGE('',*,*,#75090,.T.); +#76186 = PLANE('',#76187); +#76187 = AXIS2_PLACEMENT_3D('',#76188,#76189,#76190); +#76188 = CARTESIAN_POINT('',(-2.583589941132,-0.85,0.710940039245)); +#76189 = DIRECTION('',(-0.554700196225,6.793118197936E-17,0.832050294338 + )); +#76190 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#76191 = ADVANCED_FACE('',(#76192),#76198,.T.); +#76192 = FACE_BOUND('',#76193,.T.); +#76193 = EDGE_LOOP('',(#76194,#76195,#76196,#76197)); +#76194 = ORIENTED_EDGE('',*,*,#75057,.T.); +#76195 = ORIENTED_EDGE('',*,*,#75934,.T.); +#76196 = ORIENTED_EDGE('',*,*,#75120,.F.); +#76197 = ORIENTED_EDGE('',*,*,#76179,.T.); +#76198 = PLANE('',#76199); +#76199 = AXIS2_PLACEMENT_3D('',#76200,#76201,#76202); +#76200 = CARTESIAN_POINT('',(-2.75,-0.85,0.6)); +#76201 = DIRECTION('',(-0.832050294338,1.01896772969E-16,-0.554700196225 + )); +#76202 = DIRECTION('',(0.554700196225,-6.793118197936E-17, + -0.832050294338)); +#76203 = ADVANCED_FACE('',(#76204),#76231,.T.); +#76204 = FACE_BOUND('',#76205,.T.); +#76205 = EDGE_LOOP('',(#76206,#76207,#76208,#76216,#76224)); +#76206 = ORIENTED_EDGE('',*,*,#75197,.F.); +#76207 = ORIENTED_EDGE('',*,*,#75187,.T.); +#76208 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76209 = EDGE_CURVE('',#75190,#76210,#76212,.T.); +#76210 = VERTEX_POINT('',#76211); +#76211 = CARTESIAN_POINT('',(-2.15,-0.4,1.65)); +#76212 = LINE('',#76213,#76214); +#76213 = CARTESIAN_POINT('',(-2.15,-0.4,1.5)); +#76214 = VECTOR('',#76215,1.); +#76215 = DIRECTION('',(0.,0.,1.)); +#76216 = ORIENTED_EDGE('',*,*,#76217,.T.); +#76217 = EDGE_CURVE('',#76210,#76218,#76220,.T.); +#76218 = VERTEX_POINT('',#76219); +#76219 = CARTESIAN_POINT('',(-2.2,-0.4,1.65)); +#76220 = LINE('',#76221,#76222); +#76221 = CARTESIAN_POINT('',(-2.15,-0.4,1.65)); +#76222 = VECTOR('',#76223,1.); +#76223 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76224 = ORIENTED_EDGE('',*,*,#76225,.T.); +#76225 = EDGE_CURVE('',#76218,#74354,#76226,.T.); +#76226 = CIRCLE('',#76227,0.15); +#76227 = AXIS2_PLACEMENT_3D('',#76228,#76229,#76230); +#76228 = CARTESIAN_POINT('',(-2.2,-0.4,1.5)); +#76229 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76230 = DIRECTION('',(0.,0.,1.)); +#76231 = PLANE('',#76232); +#76232 = AXIS2_PLACEMENT_3D('',#76233,#76234,#76235); +#76233 = CARTESIAN_POINT('',(-2.2,-0.4,1.5)); +#76234 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76235 = DIRECTION('',(-0.,0.,-1.)); +#76236 = ADVANCED_FACE('',(#76237),#76255,.F.); +#76237 = FACE_BOUND('',#76238,.F.); +#76238 = EDGE_LOOP('',(#76239,#76240,#76241,#76249)); +#76239 = ORIENTED_EDGE('',*,*,#75253,.F.); +#76240 = ORIENTED_EDGE('',*,*,#76209,.T.); +#76241 = ORIENTED_EDGE('',*,*,#76242,.T.); +#76242 = EDGE_CURVE('',#76210,#76243,#76245,.T.); +#76243 = VERTEX_POINT('',#76244); +#76244 = CARTESIAN_POINT('',(-2.15,-0.9,1.65)); +#76245 = LINE('',#76246,#76247); +#76246 = CARTESIAN_POINT('',(-2.15,1.55,1.65)); +#76247 = VECTOR('',#76248,1.); +#76248 = DIRECTION('',(0.,-1.,0.)); +#76249 = ORIENTED_EDGE('',*,*,#76250,.F.); +#76250 = EDGE_CURVE('',#75246,#76243,#76251,.T.); +#76251 = LINE('',#76252,#76253); +#76252 = CARTESIAN_POINT('',(-2.15,-0.9,1.5)); +#76253 = VECTOR('',#76254,1.); +#76254 = DIRECTION('',(0.,0.,1.)); +#76255 = PLANE('',#76256); +#76256 = AXIS2_PLACEMENT_3D('',#76257,#76258,#76259); +#76257 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#76258 = DIRECTION('',(1.,0.,0.)); +#76259 = DIRECTION('',(0.,-1.,0.)); +#76260 = ADVANCED_FACE('',(#76261),#76279,.T.); +#76261 = FACE_BOUND('',#76262,.F.); +#76262 = EDGE_LOOP('',(#76263,#76264,#76272,#76278)); +#76263 = ORIENTED_EDGE('',*,*,#76250,.T.); +#76264 = ORIENTED_EDGE('',*,*,#76265,.T.); +#76265 = EDGE_CURVE('',#76243,#76266,#76268,.T.); +#76266 = VERTEX_POINT('',#76267); +#76267 = CARTESIAN_POINT('',(-2.3,-0.9,1.65)); +#76268 = LINE('',#76269,#76270); +#76269 = CARTESIAN_POINT('',(-2.15,-0.9,1.65)); +#76270 = VECTOR('',#76271,1.); +#76271 = DIRECTION('',(-1.,-0.,-0.)); +#76272 = ORIENTED_EDGE('',*,*,#76273,.F.); +#76273 = EDGE_CURVE('',#75238,#76266,#76274,.T.); +#76274 = LINE('',#76275,#76276); +#76275 = CARTESIAN_POINT('',(-2.3,-0.9,1.5)); +#76276 = VECTOR('',#76277,1.); +#76277 = DIRECTION('',(0.,0.,1.)); +#76278 = ORIENTED_EDGE('',*,*,#75245,.F.); +#76279 = PLANE('',#76280); +#76280 = AXIS2_PLACEMENT_3D('',#76281,#76282,#76283); +#76281 = CARTESIAN_POINT('',(-2.15,-0.9,1.5)); +#76282 = DIRECTION('',(0.,1.,0.)); +#76283 = DIRECTION('',(1.,0.,0.)); +#76284 = ADVANCED_FACE('',(#76285),#76303,.T.); +#76285 = FACE_BOUND('',#76286,.F.); +#76286 = EDGE_LOOP('',(#76287,#76288,#76296,#76302)); +#76287 = ORIENTED_EDGE('',*,*,#76273,.T.); +#76288 = ORIENTED_EDGE('',*,*,#76289,.T.); +#76289 = EDGE_CURVE('',#76266,#76290,#76292,.T.); +#76290 = VERTEX_POINT('',#76291); +#76291 = CARTESIAN_POINT('',(-2.3,-1.4,1.65)); +#76292 = LINE('',#76293,#76294); +#76293 = CARTESIAN_POINT('',(-2.3,-0.9,1.65)); +#76294 = VECTOR('',#76295,1.); +#76295 = DIRECTION('',(-0.,-1.,-0.)); +#76296 = ORIENTED_EDGE('',*,*,#76297,.F.); +#76297 = EDGE_CURVE('',#75230,#76290,#76298,.T.); +#76298 = LINE('',#76299,#76300); +#76299 = CARTESIAN_POINT('',(-2.3,-1.4,1.5)); +#76300 = VECTOR('',#76301,1.); +#76301 = DIRECTION('',(0.,0.,1.)); +#76302 = ORIENTED_EDGE('',*,*,#75237,.F.); +#76303 = PLANE('',#76304); +#76304 = AXIS2_PLACEMENT_3D('',#76305,#76306,#76307); +#76305 = CARTESIAN_POINT('',(-2.3,-0.9,1.5)); +#76306 = DIRECTION('',(-1.,-0.,-0.)); +#76307 = DIRECTION('',(0.,1.,0.)); +#76308 = ADVANCED_FACE('',(#76309),#76327,.T.); +#76309 = FACE_BOUND('',#76310,.F.); +#76310 = EDGE_LOOP('',(#76311,#76312,#76320,#76326)); +#76311 = ORIENTED_EDGE('',*,*,#76297,.T.); +#76312 = ORIENTED_EDGE('',*,*,#76313,.T.); +#76313 = EDGE_CURVE('',#76290,#76314,#76316,.T.); +#76314 = VERTEX_POINT('',#76315); +#76315 = CARTESIAN_POINT('',(-2.15,-1.4,1.65)); +#76316 = LINE('',#76317,#76318); +#76317 = CARTESIAN_POINT('',(-2.3,-1.4,1.65)); +#76318 = VECTOR('',#76319,1.); +#76319 = DIRECTION('',(1.,0.,0.)); +#76320 = ORIENTED_EDGE('',*,*,#76321,.F.); +#76321 = EDGE_CURVE('',#75222,#76314,#76322,.T.); +#76322 = LINE('',#76323,#76324); +#76323 = CARTESIAN_POINT('',(-2.15,-1.4,1.5)); +#76324 = VECTOR('',#76325,1.); +#76325 = DIRECTION('',(0.,0.,1.)); +#76326 = ORIENTED_EDGE('',*,*,#75229,.F.); +#76327 = PLANE('',#76328); +#76328 = AXIS2_PLACEMENT_3D('',#76329,#76330,#76331); +#76329 = CARTESIAN_POINT('',(-2.3,-1.4,1.5)); +#76330 = DIRECTION('',(-0.,-1.,-0.)); +#76331 = DIRECTION('',(-1.,0.,0.)); +#76332 = ADVANCED_FACE('',(#76333),#76351,.F.); +#76333 = FACE_BOUND('',#76334,.F.); +#76334 = EDGE_LOOP('',(#76335,#76336,#76337,#76345)); +#76335 = ORIENTED_EDGE('',*,*,#75221,.F.); +#76336 = ORIENTED_EDGE('',*,*,#76321,.T.); +#76337 = ORIENTED_EDGE('',*,*,#76338,.T.); +#76338 = EDGE_CURVE('',#76314,#76339,#76341,.T.); +#76339 = VERTEX_POINT('',#76340); +#76340 = CARTESIAN_POINT('',(-2.15,-1.55,1.65)); +#76341 = LINE('',#76342,#76343); +#76342 = CARTESIAN_POINT('',(-2.15,1.55,1.65)); +#76343 = VECTOR('',#76344,1.); +#76344 = DIRECTION('',(0.,-1.,0.)); +#76345 = ORIENTED_EDGE('',*,*,#76346,.F.); +#76346 = EDGE_CURVE('',#75214,#76339,#76347,.T.); +#76347 = LINE('',#76348,#76349); +#76348 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#76349 = VECTOR('',#76350,1.); +#76350 = DIRECTION('',(0.,0.,1.)); +#76351 = PLANE('',#76352); +#76352 = AXIS2_PLACEMENT_3D('',#76353,#76354,#76355); +#76353 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#76354 = DIRECTION('',(1.,0.,0.)); +#76355 = DIRECTION('',(0.,-1.,0.)); +#76356 = ADVANCED_FACE('',(#76357),#76368,.F.); +#76357 = FACE_BOUND('',#76358,.F.); +#76358 = EDGE_LOOP('',(#76359,#76360,#76361,#76367)); +#76359 = ORIENTED_EDGE('',*,*,#75213,.F.); +#76360 = ORIENTED_EDGE('',*,*,#76346,.T.); +#76361 = ORIENTED_EDGE('',*,*,#76362,.T.); +#76362 = EDGE_CURVE('',#76339,#76029,#76363,.T.); +#76363 = LINE('',#76364,#76365); +#76364 = CARTESIAN_POINT('',(-2.15,-1.55,1.65)); +#76365 = VECTOR('',#76366,1.); +#76366 = DIRECTION('',(1.,0.,0.)); +#76367 = ORIENTED_EDGE('',*,*,#76028,.F.); +#76368 = PLANE('',#76369); +#76369 = AXIS2_PLACEMENT_3D('',#76370,#76371,#76372); +#76370 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#76371 = DIRECTION('',(0.,1.,0.)); +#76372 = DIRECTION('',(1.,0.,0.)); +#76373 = ADVANCED_FACE('',(#76374),#76386,.T.); +#76374 = FACE_BOUND('',#76375,.T.); +#76375 = EDGE_LOOP('',(#76376,#76377,#76378,#76379)); +#76376 = ORIENTED_EDGE('',*,*,#75315,.T.); +#76377 = ORIENTED_EDGE('',*,*,#75268,.T.); +#76378 = ORIENTED_EDGE('',*,*,#75337,.F.); +#76379 = ORIENTED_EDGE('',*,*,#76380,.F.); +#76380 = EDGE_CURVE('',#75301,#75330,#76381,.T.); +#76381 = CIRCLE('',#76382,5.E-02); +#76382 = AXIS2_PLACEMENT_3D('',#76383,#76384,#76385); +#76383 = CARTESIAN_POINT('',(-2.2,-0.35,1.)); +#76384 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#76385 = DIRECTION('',(0.,0.,1.)); +#76386 = CYLINDRICAL_SURFACE('',#76387,5.E-02); +#76387 = AXIS2_PLACEMENT_3D('',#76388,#76389,#76390); +#76388 = CARTESIAN_POINT('',(-2.2,-0.35,1.)); +#76389 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76390 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76391 = ADVANCED_FACE('',(#76392),#76404,.T.); +#76392 = FACE_BOUND('',#76393,.T.); +#76393 = EDGE_LOOP('',(#76394,#76401,#76402,#76403)); +#76394 = ORIENTED_EDGE('',*,*,#76395,.T.); +#76395 = EDGE_CURVE('',#75385,#75356,#76396,.T.); +#76396 = CIRCLE('',#76397,5.E-02); +#76397 = AXIS2_PLACEMENT_3D('',#76398,#76399,#76400); +#76398 = CARTESIAN_POINT('',(-2.2,0.35,1.)); +#76399 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76400 = DIRECTION('',(0.,0.,1.)); +#76401 = ORIENTED_EDGE('',*,*,#75370,.T.); +#76402 = ORIENTED_EDGE('',*,*,#75276,.F.); +#76403 = ORIENTED_EDGE('',*,*,#75392,.F.); +#76404 = CYLINDRICAL_SURFACE('',#76405,5.E-02); +#76405 = AXIS2_PLACEMENT_3D('',#76406,#76407,#76408); +#76406 = CARTESIAN_POINT('',(-2.2,0.35,1.)); +#76407 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76408 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#76409 = ADVANCED_FACE('',(#76410),#76429,.T.); +#76410 = FACE_BOUND('',#76411,.T.); +#76411 = EDGE_LOOP('',(#76412,#76420,#76427,#76428)); +#76412 = ORIENTED_EDGE('',*,*,#76413,.F.); +#76413 = EDGE_CURVE('',#76414,#76218,#76416,.T.); +#76414 = VERTEX_POINT('',#76415); +#76415 = CARTESIAN_POINT('',(-2.2,0.4,1.65)); +#76416 = LINE('',#76417,#76418); +#76417 = CARTESIAN_POINT('',(-2.2,0.4,1.65)); +#76418 = VECTOR('',#76419,1.); +#76419 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76420 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76421 = EDGE_CURVE('',#76414,#74298,#76422,.T.); +#76422 = CIRCLE('',#76423,0.15); +#76423 = AXIS2_PLACEMENT_3D('',#76424,#76425,#76426); +#76424 = CARTESIAN_POINT('',(-2.2,0.4,1.5)); +#76425 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76426 = DIRECTION('',(0.,0.,1.)); +#76427 = ORIENTED_EDGE('',*,*,#75284,.T.); +#76428 = ORIENTED_EDGE('',*,*,#76225,.F.); +#76429 = CYLINDRICAL_SURFACE('',#76430,0.15); +#76430 = AXIS2_PLACEMENT_3D('',#76431,#76432,#76433); +#76431 = CARTESIAN_POINT('',(-2.2,-0.2,1.5)); +#76432 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#76433 = DIRECTION('',(0.,0.,1.)); +#76434 = ADVANCED_FACE('',(#76435),#76440,.T.); +#76435 = FACE_BOUND('',#76436,.T.); +#76436 = EDGE_LOOP('',(#76437,#76438,#76439)); +#76437 = ORIENTED_EDGE('',*,*,#75298,.T.); +#76438 = ORIENTED_EDGE('',*,*,#76380,.T.); +#76439 = ORIENTED_EDGE('',*,*,#75329,.T.); +#76440 = PLANE('',#76441); +#76441 = AXIS2_PLACEMENT_3D('',#76442,#76443,#76444); +#76442 = CARTESIAN_POINT('',(-2.2,2.694222958124E-16,1.3)); +#76443 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76444 = DIRECTION('',(0.,0.,1.)); +#76445 = ADVANCED_FACE('',(#76446),#76451,.T.); +#76446 = FACE_BOUND('',#76447,.T.); +#76447 = EDGE_LOOP('',(#76448,#76449,#76450)); +#76448 = ORIENTED_EDGE('',*,*,#76395,.F.); +#76449 = ORIENTED_EDGE('',*,*,#75384,.T.); +#76450 = ORIENTED_EDGE('',*,*,#75353,.T.); +#76451 = PLANE('',#76452); +#76452 = AXIS2_PLACEMENT_3D('',#76453,#76454,#76455); +#76453 = CARTESIAN_POINT('',(-2.2,2.694222958124E-16,1.3)); +#76454 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76455 = DIRECTION('',(0.,0.,1.)); +#76456 = ADVANCED_FACE('',(#76457),#76485,.T.); +#76457 = FACE_BOUND('',#76458,.T.); +#76458 = EDGE_LOOP('',(#76459,#76460,#76461,#76469,#76477,#76484)); +#76459 = ORIENTED_EDGE('',*,*,#75503,.T.); +#76460 = ORIENTED_EDGE('',*,*,#75408,.T.); +#76461 = ORIENTED_EDGE('',*,*,#76462,.T.); +#76462 = EDGE_CURVE('',#75411,#76463,#76465,.T.); +#76463 = VERTEX_POINT('',#76464); +#76464 = CARTESIAN_POINT('',(-1.7,1.55,1.65)); +#76465 = LINE('',#76466,#76467); +#76466 = CARTESIAN_POINT('',(-1.7,1.55,1.5)); +#76467 = VECTOR('',#76468,1.); +#76468 = DIRECTION('',(0.,0.,1.)); +#76469 = ORIENTED_EDGE('',*,*,#76470,.T.); +#76470 = EDGE_CURVE('',#76463,#76471,#76473,.T.); +#76471 = VERTEX_POINT('',#76472); +#76472 = CARTESIAN_POINT('',(-1.7,1.6,1.65)); +#76473 = LINE('',#76474,#76475); +#76474 = CARTESIAN_POINT('',(-1.7,1.55,1.65)); +#76475 = VECTOR('',#76476,1.); +#76476 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#76477 = ORIENTED_EDGE('',*,*,#76478,.T.); +#76478 = EDGE_CURVE('',#76471,#75887,#76479,.T.); +#76479 = CIRCLE('',#76480,0.15); +#76480 = AXIS2_PLACEMENT_3D('',#76481,#76482,#76483); +#76481 = CARTESIAN_POINT('',(-1.7,1.6,1.5)); +#76482 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#76483 = DIRECTION('',(0.,0.,1.)); +#76484 = ORIENTED_EDGE('',*,*,#75894,.T.); +#76485 = PLANE('',#76486); +#76486 = AXIS2_PLACEMENT_3D('',#76487,#76488,#76489); +#76487 = CARTESIAN_POINT('',(-1.7,1.6,1.5)); +#76488 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#76489 = DIRECTION('',(0.,0.,-1.)); +#76490 = ADVANCED_FACE('',(#76491),#76509,.F.); +#76491 = FACE_BOUND('',#76492,.F.); +#76492 = EDGE_LOOP('',(#76493,#76494,#76495,#76503)); +#76493 = ORIENTED_EDGE('',*,*,#75481,.F.); +#76494 = ORIENTED_EDGE('',*,*,#76462,.T.); +#76495 = ORIENTED_EDGE('',*,*,#76496,.T.); +#76496 = EDGE_CURVE('',#76463,#76497,#76499,.T.); +#76497 = VERTEX_POINT('',#76498); +#76498 = CARTESIAN_POINT('',(-2.15,1.55,1.65)); +#76499 = LINE('',#76500,#76501); +#76500 = CARTESIAN_POINT('',(2.15,1.55,1.65)); +#76501 = VECTOR('',#76502,1.); +#76502 = DIRECTION('',(-1.,0.,0.)); +#76503 = ORIENTED_EDGE('',*,*,#76504,.F.); +#76504 = EDGE_CURVE('',#75474,#76497,#76505,.T.); +#76505 = LINE('',#76506,#76507); +#76506 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#76507 = VECTOR('',#76508,1.); +#76508 = DIRECTION('',(0.,0.,1.)); +#76509 = PLANE('',#76510); +#76510 = AXIS2_PLACEMENT_3D('',#76511,#76512,#76513); +#76511 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#76512 = DIRECTION('',(0.,-1.,0.)); +#76513 = DIRECTION('',(-1.,0.,0.)); +#76514 = ADVANCED_FACE('',(#76515),#76533,.F.); +#76515 = FACE_BOUND('',#76516,.F.); +#76516 = EDGE_LOOP('',(#76517,#76518,#76519,#76527)); +#76517 = ORIENTED_EDGE('',*,*,#75473,.F.); +#76518 = ORIENTED_EDGE('',*,*,#76504,.T.); +#76519 = ORIENTED_EDGE('',*,*,#76520,.T.); +#76520 = EDGE_CURVE('',#76497,#76521,#76523,.T.); +#76521 = VERTEX_POINT('',#76522); +#76522 = CARTESIAN_POINT('',(-2.15,1.4,1.65)); +#76523 = LINE('',#76524,#76525); +#76524 = CARTESIAN_POINT('',(-2.15,1.55,1.65)); +#76525 = VECTOR('',#76526,1.); +#76526 = DIRECTION('',(0.,-1.,0.)); +#76527 = ORIENTED_EDGE('',*,*,#76528,.F.); +#76528 = EDGE_CURVE('',#75466,#76521,#76529,.T.); +#76529 = LINE('',#76530,#76531); +#76530 = CARTESIAN_POINT('',(-2.15,1.4,1.5)); +#76531 = VECTOR('',#76532,1.); +#76532 = DIRECTION('',(0.,0.,1.)); +#76533 = PLANE('',#76534); +#76534 = AXIS2_PLACEMENT_3D('',#76535,#76536,#76537); +#76535 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#76536 = DIRECTION('',(1.,0.,0.)); +#76537 = DIRECTION('',(0.,-1.,0.)); +#76538 = ADVANCED_FACE('',(#76539),#76557,.T.); +#76539 = FACE_BOUND('',#76540,.F.); +#76540 = EDGE_LOOP('',(#76541,#76542,#76550,#76556)); +#76541 = ORIENTED_EDGE('',*,*,#76528,.T.); +#76542 = ORIENTED_EDGE('',*,*,#76543,.T.); +#76543 = EDGE_CURVE('',#76521,#76544,#76546,.T.); +#76544 = VERTEX_POINT('',#76545); +#76545 = CARTESIAN_POINT('',(-2.3,1.4,1.65)); +#76546 = LINE('',#76547,#76548); +#76547 = CARTESIAN_POINT('',(-2.15,1.4,1.65)); +#76548 = VECTOR('',#76549,1.); +#76549 = DIRECTION('',(-1.,-0.,-0.)); +#76550 = ORIENTED_EDGE('',*,*,#76551,.F.); +#76551 = EDGE_CURVE('',#75458,#76544,#76552,.T.); +#76552 = LINE('',#76553,#76554); +#76553 = CARTESIAN_POINT('',(-2.3,1.4,1.5)); +#76554 = VECTOR('',#76555,1.); +#76555 = DIRECTION('',(0.,0.,1.)); +#76556 = ORIENTED_EDGE('',*,*,#75465,.F.); +#76557 = PLANE('',#76558); +#76558 = AXIS2_PLACEMENT_3D('',#76559,#76560,#76561); +#76559 = CARTESIAN_POINT('',(-2.15,1.4,1.5)); +#76560 = DIRECTION('',(0.,1.,0.)); +#76561 = DIRECTION('',(1.,0.,0.)); +#76562 = ADVANCED_FACE('',(#76563),#76581,.T.); +#76563 = FACE_BOUND('',#76564,.F.); +#76564 = EDGE_LOOP('',(#76565,#76566,#76574,#76580)); +#76565 = ORIENTED_EDGE('',*,*,#76551,.T.); +#76566 = ORIENTED_EDGE('',*,*,#76567,.T.); +#76567 = EDGE_CURVE('',#76544,#76568,#76570,.T.); +#76568 = VERTEX_POINT('',#76569); +#76569 = CARTESIAN_POINT('',(-2.3,0.9,1.65)); +#76570 = LINE('',#76571,#76572); +#76571 = CARTESIAN_POINT('',(-2.3,1.4,1.65)); +#76572 = VECTOR('',#76573,1.); +#76573 = DIRECTION('',(-0.,-1.,-0.)); +#76574 = ORIENTED_EDGE('',*,*,#76575,.F.); +#76575 = EDGE_CURVE('',#75450,#76568,#76576,.T.); +#76576 = LINE('',#76577,#76578); +#76577 = CARTESIAN_POINT('',(-2.3,0.9,1.5)); +#76578 = VECTOR('',#76579,1.); +#76579 = DIRECTION('',(0.,0.,1.)); +#76580 = ORIENTED_EDGE('',*,*,#75457,.F.); +#76581 = PLANE('',#76582); +#76582 = AXIS2_PLACEMENT_3D('',#76583,#76584,#76585); +#76583 = CARTESIAN_POINT('',(-2.3,1.4,1.5)); +#76584 = DIRECTION('',(-1.,-0.,-0.)); +#76585 = DIRECTION('',(0.,1.,0.)); +#76586 = ADVANCED_FACE('',(#76587),#76605,.T.); +#76587 = FACE_BOUND('',#76588,.F.); +#76588 = EDGE_LOOP('',(#76589,#76590,#76598,#76604)); +#76589 = ORIENTED_EDGE('',*,*,#76575,.T.); +#76590 = ORIENTED_EDGE('',*,*,#76591,.T.); +#76591 = EDGE_CURVE('',#76568,#76592,#76594,.T.); +#76592 = VERTEX_POINT('',#76593); +#76593 = CARTESIAN_POINT('',(-2.15,0.9,1.65)); +#76594 = LINE('',#76595,#76596); +#76595 = CARTESIAN_POINT('',(-2.3,0.9,1.65)); +#76596 = VECTOR('',#76597,1.); +#76597 = DIRECTION('',(1.,0.,0.)); +#76598 = ORIENTED_EDGE('',*,*,#76599,.F.); +#76599 = EDGE_CURVE('',#75442,#76592,#76600,.T.); +#76600 = LINE('',#76601,#76602); +#76601 = CARTESIAN_POINT('',(-2.15,0.9,1.5)); +#76602 = VECTOR('',#76603,1.); +#76603 = DIRECTION('',(0.,0.,1.)); +#76604 = ORIENTED_EDGE('',*,*,#75449,.F.); +#76605 = PLANE('',#76606); +#76606 = AXIS2_PLACEMENT_3D('',#76607,#76608,#76609); +#76607 = CARTESIAN_POINT('',(-2.3,0.9,1.5)); +#76608 = DIRECTION('',(-0.,-1.,-0.)); +#76609 = DIRECTION('',(-1.,0.,0.)); +#76610 = ADVANCED_FACE('',(#76611),#76629,.F.); +#76611 = FACE_BOUND('',#76612,.F.); +#76612 = EDGE_LOOP('',(#76613,#76614,#76615,#76623)); +#76613 = ORIENTED_EDGE('',*,*,#75441,.F.); +#76614 = ORIENTED_EDGE('',*,*,#76599,.T.); +#76615 = ORIENTED_EDGE('',*,*,#76616,.T.); +#76616 = EDGE_CURVE('',#76592,#76617,#76619,.T.); +#76617 = VERTEX_POINT('',#76618); +#76618 = CARTESIAN_POINT('',(-2.15,0.4,1.65)); +#76619 = LINE('',#76620,#76621); +#76620 = CARTESIAN_POINT('',(-2.15,1.55,1.65)); +#76621 = VECTOR('',#76622,1.); +#76622 = DIRECTION('',(0.,-1.,0.)); +#76623 = ORIENTED_EDGE('',*,*,#76624,.F.); +#76624 = EDGE_CURVE('',#75434,#76617,#76625,.T.); +#76625 = LINE('',#76626,#76627); +#76626 = CARTESIAN_POINT('',(-2.15,0.4,1.5)); +#76627 = VECTOR('',#76628,1.); +#76628 = DIRECTION('',(0.,0.,1.)); +#76629 = PLANE('',#76630); +#76630 = AXIS2_PLACEMENT_3D('',#76631,#76632,#76633); +#76631 = CARTESIAN_POINT('',(-2.15,1.55,1.5)); +#76632 = DIRECTION('',(1.,0.,0.)); +#76633 = DIRECTION('',(0.,-1.,0.)); +#76634 = ADVANCED_FACE('',(#76635),#76647,.T.); +#76635 = FACE_BOUND('',#76636,.F.); +#76636 = EDGE_LOOP('',(#76637,#76638,#76639,#76640,#76646)); +#76637 = ORIENTED_EDGE('',*,*,#75425,.T.); +#76638 = ORIENTED_EDGE('',*,*,#75433,.T.); +#76639 = ORIENTED_EDGE('',*,*,#76624,.T.); +#76640 = ORIENTED_EDGE('',*,*,#76641,.T.); +#76641 = EDGE_CURVE('',#76617,#76414,#76642,.T.); +#76642 = LINE('',#76643,#76644); +#76643 = CARTESIAN_POINT('',(-2.15,0.4,1.65)); +#76644 = VECTOR('',#76645,1.); +#76645 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#76646 = ORIENTED_EDGE('',*,*,#76421,.T.); +#76647 = PLANE('',#76648); +#76648 = AXIS2_PLACEMENT_3D('',#76649,#76650,#76651); +#76649 = CARTESIAN_POINT('',(-2.2,0.4,1.5)); +#76650 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#76651 = DIRECTION('',(0.,-0.,1.)); +#76652 = ADVANCED_FACE('',(#76653),#76680,.F.); +#76653 = FACE_BOUND('',#76654,.F.); +#76654 = EDGE_LOOP('',(#76655,#76656,#76664,#76673,#76679)); +#76655 = ORIENTED_EDGE('',*,*,#75785,.F.); +#76656 = ORIENTED_EDGE('',*,*,#76657,.T.); +#76657 = EDGE_CURVE('',#75778,#76658,#76660,.T.); +#76658 = VERTEX_POINT('',#76659); +#76659 = CARTESIAN_POINT('',(2.35,1.6,0.55)); +#76660 = LINE('',#76661,#76662); +#76661 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#76662 = VECTOR('',#76663,1.); +#76663 = DIRECTION('',(0.,0.,1.)); +#76664 = ORIENTED_EDGE('',*,*,#76665,.T.); +#76665 = EDGE_CURVE('',#76658,#76666,#76668,.T.); +#76666 = VERTEX_POINT('',#76667); +#76667 = CARTESIAN_POINT('',(2.25,1.6,0.45)); +#76668 = CIRCLE('',#76669,0.1); +#76669 = AXIS2_PLACEMENT_3D('',#76670,#76671,#76672); +#76670 = CARTESIAN_POINT('',(2.25,1.6,0.55)); +#76671 = DIRECTION('',(1.110223024625E-16,1.,-0.)); +#76672 = DIRECTION('',(0.,0.,1.)); +#76673 = ORIENTED_EDGE('',*,*,#76674,.T.); +#76674 = EDGE_CURVE('',#76666,#75808,#76675,.T.); +#76675 = LINE('',#76676,#76677); +#76676 = CARTESIAN_POINT('',(2.35,1.6,0.45)); +#76677 = VECTOR('',#76678,1.); +#76678 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#76679 = ORIENTED_EDGE('',*,*,#75807,.F.); +#76680 = PLANE('',#76681); +#76681 = AXIS2_PLACEMENT_3D('',#76682,#76683,#76684); +#76682 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#76683 = DIRECTION('',(0.,-1.,0.)); +#76684 = DIRECTION('',(-1.,0.,0.)); +#76685 = ADVANCED_FACE('',(#76686),#76917,.F.); +#76686 = FACE_BOUND('',#76687,.F.); +#76687 = EDGE_LOOP('',(#76688,#76689,#76695,#76696,#76697,#76698,#76706, + #76714,#76722,#76730,#76738,#76746,#76754,#76762,#76770,#76778, + #76786,#76792,#76800,#76806,#76807,#76808,#76816,#76824,#76832, + #76840,#76848,#76856,#76862,#76863,#76871,#76879,#76887,#76895, + #76903,#76911)); +#76688 = ORIENTED_EDGE('',*,*,#75681,.F.); +#76689 = ORIENTED_EDGE('',*,*,#76690,.T.); +#76690 = EDGE_CURVE('',#75674,#75954,#76691,.T.); +#76691 = LINE('',#76692,#76693); +#76692 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#76693 = VECTOR('',#76694,1.); +#76694 = DIRECTION('',(0.,0.,1.)); +#76695 = ORIENTED_EDGE('',*,*,#75953,.T.); +#76696 = ORIENTED_EDGE('',*,*,#75963,.T.); +#76697 = ORIENTED_EDGE('',*,*,#76135,.T.); +#76698 = ORIENTED_EDGE('',*,*,#76699,.T.); +#76699 = EDGE_CURVE('',#76128,#76700,#76702,.T.); +#76700 = VERTEX_POINT('',#76701); +#76701 = CARTESIAN_POINT('',(2.35,-1.6,1.5)); +#76702 = LINE('',#76703,#76704); +#76703 = CARTESIAN_POINT('',(2.35,-1.75,1.25)); +#76704 = VECTOR('',#76705,1.); +#76705 = DIRECTION('',(1.142410067494E-16,0.514495755428,0.857492925712) + ); +#76706 = ORIENTED_EDGE('',*,*,#76707,.T.); +#76707 = EDGE_CURVE('',#76700,#76708,#76710,.T.); +#76708 = VERTEX_POINT('',#76709); +#76709 = CARTESIAN_POINT('',(2.35,-0.4,1.5)); +#76710 = LINE('',#76711,#76712); +#76711 = CARTESIAN_POINT('',(2.35,-1.6,1.5)); +#76712 = VECTOR('',#76713,1.); +#76713 = DIRECTION('',(0.,1.,0.)); +#76714 = ORIENTED_EDGE('',*,*,#76715,.T.); +#76715 = EDGE_CURVE('',#76708,#76716,#76718,.T.); +#76716 = VERTEX_POINT('',#76717); +#76717 = CARTESIAN_POINT('',(2.35,-0.4,1.)); +#76718 = LINE('',#76719,#76720); +#76719 = CARTESIAN_POINT('',(2.35,-0.4,1.65)); +#76720 = VECTOR('',#76721,1.); +#76721 = DIRECTION('',(0.,0.,-1.)); +#76722 = ORIENTED_EDGE('',*,*,#76723,.T.); +#76723 = EDGE_CURVE('',#76716,#76724,#76726,.T.); +#76724 = VERTEX_POINT('',#76725); +#76725 = CARTESIAN_POINT('',(2.35,-0.4,0.95)); +#76726 = LINE('',#76727,#76728); +#76727 = CARTESIAN_POINT('',(2.35,-0.4,1.65)); +#76728 = VECTOR('',#76729,1.); +#76729 = DIRECTION('',(0.,0.,-1.)); +#76730 = ORIENTED_EDGE('',*,*,#76731,.T.); +#76731 = EDGE_CURVE('',#76724,#76732,#76734,.T.); +#76732 = VERTEX_POINT('',#76733); +#76733 = CARTESIAN_POINT('',(2.35,-0.35,0.95)); +#76734 = LINE('',#76735,#76736); +#76735 = CARTESIAN_POINT('',(2.35,-0.4,0.95)); +#76736 = VECTOR('',#76737,1.); +#76737 = DIRECTION('',(0.,1.,0.)); +#76738 = ORIENTED_EDGE('',*,*,#76739,.T.); +#76739 = EDGE_CURVE('',#76732,#76740,#76742,.T.); +#76740 = VERTEX_POINT('',#76741); +#76741 = CARTESIAN_POINT('',(2.35,0.35,0.95)); +#76742 = LINE('',#76743,#76744); +#76743 = CARTESIAN_POINT('',(2.35,-0.35,0.95)); +#76744 = VECTOR('',#76745,1.); +#76745 = DIRECTION('',(0.,1.,0.)); +#76746 = ORIENTED_EDGE('',*,*,#76747,.T.); +#76747 = EDGE_CURVE('',#76740,#76748,#76750,.T.); +#76748 = VERTEX_POINT('',#76749); +#76749 = CARTESIAN_POINT('',(2.35,0.4,0.95)); +#76750 = LINE('',#76751,#76752); +#76751 = CARTESIAN_POINT('',(2.35,-0.4,0.95)); +#76752 = VECTOR('',#76753,1.); +#76753 = DIRECTION('',(0.,1.,0.)); +#76754 = ORIENTED_EDGE('',*,*,#76755,.T.); +#76755 = EDGE_CURVE('',#76748,#76756,#76758,.T.); +#76756 = VERTEX_POINT('',#76757); +#76757 = CARTESIAN_POINT('',(2.35,0.4,1.)); +#76758 = LINE('',#76759,#76760); +#76759 = CARTESIAN_POINT('',(2.35,0.4,0.95)); +#76760 = VECTOR('',#76761,1.); +#76761 = DIRECTION('',(0.,0.,1.)); +#76762 = ORIENTED_EDGE('',*,*,#76763,.T.); +#76763 = EDGE_CURVE('',#76756,#76764,#76766,.T.); +#76764 = VERTEX_POINT('',#76765); +#76765 = CARTESIAN_POINT('',(2.35,0.4,1.5)); +#76766 = LINE('',#76767,#76768); +#76767 = CARTESIAN_POINT('',(2.35,0.4,0.95)); +#76768 = VECTOR('',#76769,1.); +#76769 = DIRECTION('',(0.,0.,1.)); +#76770 = ORIENTED_EDGE('',*,*,#76771,.T.); +#76771 = EDGE_CURVE('',#76764,#76772,#76774,.T.); +#76772 = VERTEX_POINT('',#76773); +#76773 = CARTESIAN_POINT('',(2.35,1.6,1.5)); +#76774 = LINE('',#76775,#76776); +#76775 = CARTESIAN_POINT('',(2.35,-1.6,1.5)); +#76776 = VECTOR('',#76777,1.); +#76777 = DIRECTION('',(0.,1.,0.)); +#76778 = ORIENTED_EDGE('',*,*,#76779,.F.); +#76779 = EDGE_CURVE('',#76780,#76772,#76782,.T.); +#76780 = VERTEX_POINT('',#76781); +#76781 = CARTESIAN_POINT('',(2.35,1.75,1.25)); +#76782 = LINE('',#76783,#76784); +#76783 = CARTESIAN_POINT('',(2.35,1.75,1.25)); +#76784 = VECTOR('',#76785,1.); +#76785 = DIRECTION('',(-5.712050337472E-17,-0.514495755428, + 0.857492925712)); +#76786 = ORIENTED_EDGE('',*,*,#76787,.F.); +#76787 = EDGE_CURVE('',#75855,#76780,#76788,.T.); +#76788 = LINE('',#76789,#76790); +#76789 = CARTESIAN_POINT('',(2.35,1.75,0.9)); +#76790 = VECTOR('',#76791,1.); +#76791 = DIRECTION('',(0.,0.,1.)); +#76792 = ORIENTED_EDGE('',*,*,#76793,.F.); +#76793 = EDGE_CURVE('',#76794,#75855,#76796,.T.); +#76794 = VERTEX_POINT('',#76795); +#76795 = CARTESIAN_POINT('',(2.35,1.6,0.9)); +#76796 = LINE('',#76797,#76798); +#76797 = CARTESIAN_POINT('',(2.35,1.6,0.9)); +#76798 = VECTOR('',#76799,1.); +#76799 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#76800 = ORIENTED_EDGE('',*,*,#76801,.F.); +#76801 = EDGE_CURVE('',#76658,#76794,#76802,.T.); +#76802 = LINE('',#76803,#76804); +#76803 = CARTESIAN_POINT('',(2.35,1.6,0.)); +#76804 = VECTOR('',#76805,1.); +#76805 = DIRECTION('',(0.,0.,1.)); +#76806 = ORIENTED_EDGE('',*,*,#76657,.F.); +#76807 = ORIENTED_EDGE('',*,*,#75777,.F.); +#76808 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76809 = EDGE_CURVE('',#75770,#76810,#76812,.T.); +#76810 = VERTEX_POINT('',#76811); +#76811 = CARTESIAN_POINT('',(2.35,1.15,3.105286689018E-02)); +#76812 = LINE('',#76813,#76814); +#76813 = CARTESIAN_POINT('',(2.35,1.15,0.)); +#76814 = VECTOR('',#76815,1.); +#76815 = DIRECTION('',(0.,0.,1.)); +#76816 = ORIENTED_EDGE('',*,*,#76817,.T.); +#76817 = EDGE_CURVE('',#76810,#76818,#76820,.T.); +#76818 = VERTEX_POINT('',#76819); +#76819 = CARTESIAN_POINT('',(2.35,1.15,0.2)); +#76820 = LINE('',#76821,#76822); +#76821 = CARTESIAN_POINT('',(2.35,1.15,0.)); +#76822 = VECTOR('',#76823,1.); +#76823 = DIRECTION('',(0.,0.,1.)); +#76824 = ORIENTED_EDGE('',*,*,#76825,.F.); +#76825 = EDGE_CURVE('',#76826,#76818,#76828,.T.); +#76826 = VERTEX_POINT('',#76827); +#76827 = CARTESIAN_POINT('',(2.35,1.15,0.360555127546)); +#76828 = LINE('',#76829,#76830); +#76829 = CARTESIAN_POINT('',(2.35,1.15,0.1393320958)); +#76830 = VECTOR('',#76831,1.); +#76831 = DIRECTION('',(0.,0.,-1.)); +#76832 = ORIENTED_EDGE('',*,*,#76833,.F.); +#76833 = EDGE_CURVE('',#76834,#76826,#76836,.T.); +#76834 = VERTEX_POINT('',#76835); +#76835 = CARTESIAN_POINT('',(2.35,0.55,0.360555127546)); +#76836 = LINE('',#76837,#76838); +#76837 = CARTESIAN_POINT('',(2.35,-0.375,0.360555127546)); +#76838 = VECTOR('',#76839,1.); +#76839 = DIRECTION('',(0.,1.,0.)); +#76840 = ORIENTED_EDGE('',*,*,#76841,.T.); +#76841 = EDGE_CURVE('',#76834,#76842,#76844,.T.); +#76842 = VERTEX_POINT('',#76843); +#76843 = CARTESIAN_POINT('',(2.35,0.55,0.2)); +#76844 = LINE('',#76845,#76846); +#76845 = CARTESIAN_POINT('',(2.35,0.55,0.1393320958)); +#76846 = VECTOR('',#76847,1.); +#76847 = DIRECTION('',(0.,0.,-1.)); +#76848 = ORIENTED_EDGE('',*,*,#76849,.T.); +#76849 = EDGE_CURVE('',#76842,#76850,#76852,.T.); +#76850 = VERTEX_POINT('',#76851); +#76851 = CARTESIAN_POINT('',(2.35,0.55,3.105286689018E-02)); +#76852 = LINE('',#76853,#76854); +#76853 = CARTESIAN_POINT('',(2.35,0.55,0.)); +#76854 = VECTOR('',#76855,1.); +#76855 = DIRECTION('',(0.,0.,-1.)); +#76856 = ORIENTED_EDGE('',*,*,#76857,.T.); +#76857 = EDGE_CURVE('',#76850,#75730,#76858,.T.); +#76858 = LINE('',#76859,#76860); +#76859 = CARTESIAN_POINT('',(2.35,0.55,0.)); +#76860 = VECTOR('',#76861,1.); +#76861 = DIRECTION('',(0.,0.,-1.)); +#76862 = ORIENTED_EDGE('',*,*,#75729,.F.); +#76863 = ORIENTED_EDGE('',*,*,#76864,.T.); +#76864 = EDGE_CURVE('',#75722,#76865,#76867,.T.); +#76865 = VERTEX_POINT('',#76866); +#76866 = CARTESIAN_POINT('',(2.35,-0.55,3.105286689018E-02)); +#76867 = LINE('',#76868,#76869); +#76868 = CARTESIAN_POINT('',(2.35,-0.55,0.)); +#76869 = VECTOR('',#76870,1.); +#76870 = DIRECTION('',(0.,0.,1.)); +#76871 = ORIENTED_EDGE('',*,*,#76872,.T.); +#76872 = EDGE_CURVE('',#76865,#76873,#76875,.T.); +#76873 = VERTEX_POINT('',#76874); +#76874 = CARTESIAN_POINT('',(2.35,-0.55,0.2)); +#76875 = LINE('',#76876,#76877); +#76876 = CARTESIAN_POINT('',(2.35,-0.55,0.)); +#76877 = VECTOR('',#76878,1.); +#76878 = DIRECTION('',(0.,0.,1.)); +#76879 = ORIENTED_EDGE('',*,*,#76880,.F.); +#76880 = EDGE_CURVE('',#76881,#76873,#76883,.T.); +#76881 = VERTEX_POINT('',#76882); +#76882 = CARTESIAN_POINT('',(2.35,-0.55,0.360555127546)); +#76883 = LINE('',#76884,#76885); +#76884 = CARTESIAN_POINT('',(2.35,-0.55,0.1393320958)); +#76885 = VECTOR('',#76886,1.); +#76886 = DIRECTION('',(0.,0.,-1.)); +#76887 = ORIENTED_EDGE('',*,*,#76888,.F.); +#76888 = EDGE_CURVE('',#76889,#76881,#76891,.T.); +#76889 = VERTEX_POINT('',#76890); +#76890 = CARTESIAN_POINT('',(2.35,-1.15,0.360555127546)); +#76891 = LINE('',#76892,#76893); +#76892 = CARTESIAN_POINT('',(2.35,-1.225,0.360555127546)); +#76893 = VECTOR('',#76894,1.); +#76894 = DIRECTION('',(0.,1.,0.)); +#76895 = ORIENTED_EDGE('',*,*,#76896,.T.); +#76896 = EDGE_CURVE('',#76889,#76897,#76899,.T.); +#76897 = VERTEX_POINT('',#76898); +#76898 = CARTESIAN_POINT('',(2.35,-1.15,0.2)); +#76899 = LINE('',#76900,#76901); +#76900 = CARTESIAN_POINT('',(2.35,-1.15,0.1393320958)); +#76901 = VECTOR('',#76902,1.); +#76902 = DIRECTION('',(0.,0.,-1.)); +#76903 = ORIENTED_EDGE('',*,*,#76904,.T.); +#76904 = EDGE_CURVE('',#76897,#76905,#76907,.T.); +#76905 = VERTEX_POINT('',#76906); +#76906 = CARTESIAN_POINT('',(2.35,-1.15,3.105286689018E-02)); +#76907 = LINE('',#76908,#76909); +#76908 = CARTESIAN_POINT('',(2.35,-1.15,0.)); +#76909 = VECTOR('',#76910,1.); +#76910 = DIRECTION('',(0.,0.,-1.)); +#76911 = ORIENTED_EDGE('',*,*,#76912,.T.); +#76912 = EDGE_CURVE('',#76905,#75682,#76913,.T.); +#76913 = LINE('',#76914,#76915); +#76914 = CARTESIAN_POINT('',(2.35,-1.15,0.)); +#76915 = VECTOR('',#76916,1.); +#76916 = DIRECTION('',(0.,0.,-1.)); +#76917 = PLANE('',#76918); +#76918 = AXIS2_PLACEMENT_3D('',#76919,#76920,#76921); +#76919 = CARTESIAN_POINT('',(2.35,-1.6,0.)); +#76920 = DIRECTION('',(-1.,0.,0.)); +#76921 = DIRECTION('',(0.,1.,0.)); +#76922 = ADVANCED_FACE('',(#76923),#76934,.T.); +#76923 = FACE_BOUND('',#76924,.T.); +#76924 = EDGE_LOOP('',(#76925,#76926,#76927)); +#76925 = ORIENTED_EDGE('',*,*,#75769,.F.); +#76926 = ORIENTED_EDGE('',*,*,#76809,.T.); +#76927 = ORIENTED_EDGE('',*,*,#76928,.T.); +#76928 = EDGE_CURVE('',#76810,#75762,#76929,.T.); +#76929 = CIRCLE('',#76930,0.2); +#76930 = AXIS2_PLACEMENT_3D('',#76931,#76932,#76933); +#76931 = CARTESIAN_POINT('',(2.242963248302,1.15,0.2)); +#76932 = DIRECTION('',(0.,1.,0.)); +#76933 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#76934 = PLANE('',#76935); +#76935 = AXIS2_PLACEMENT_3D('',#76936,#76937,#76938); +#76936 = CARTESIAN_POINT('',(2.75,1.15,0.)); +#76937 = DIRECTION('',(0.,-1.,0.)); +#76938 = DIRECTION('',(-1.,0.,0.)); +#76939 = ADVANCED_FACE('',(#76940),#76951,.T.); +#76940 = FACE_BOUND('',#76941,.T.); +#76941 = EDGE_LOOP('',(#76942,#76948,#76949,#76950)); +#76942 = ORIENTED_EDGE('',*,*,#76943,.F.); +#76943 = EDGE_CURVE('',#75738,#75762,#76944,.T.); +#76944 = LINE('',#76945,#76946); +#76945 = CARTESIAN_POINT('',(2.242963248302,0.55,5.551115123126E-17)); +#76946 = VECTOR('',#76947,1.); +#76947 = DIRECTION('',(0.,1.,0.)); +#76948 = ORIENTED_EDGE('',*,*,#75745,.F.); +#76949 = ORIENTED_EDGE('',*,*,#75753,.F.); +#76950 = ORIENTED_EDGE('',*,*,#75761,.F.); +#76951 = PLANE('',#76952); +#76952 = AXIS2_PLACEMENT_3D('',#76953,#76954,#76955); +#76953 = CARTESIAN_POINT('',(2.242963248302,0.85,5.551115123126E-17)); +#76954 = DIRECTION('',(1.412629589944E-16,0.,-1.)); +#76955 = DIRECTION('',(-1.,0.,-1.412629589944E-16)); +#76956 = ADVANCED_FACE('',(#76957),#76968,.T.); +#76957 = FACE_BOUND('',#76958,.T.); +#76958 = EDGE_LOOP('',(#76959,#76960,#76967)); +#76959 = ORIENTED_EDGE('',*,*,#75737,.F.); +#76960 = ORIENTED_EDGE('',*,*,#76961,.F.); +#76961 = EDGE_CURVE('',#76850,#75738,#76962,.T.); +#76962 = CIRCLE('',#76963,0.2); +#76963 = AXIS2_PLACEMENT_3D('',#76964,#76965,#76966); +#76964 = CARTESIAN_POINT('',(2.242963248302,0.55,0.2)); +#76965 = DIRECTION('',(0.,1.,0.)); +#76966 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#76967 = ORIENTED_EDGE('',*,*,#76857,.T.); +#76968 = PLANE('',#76969); +#76969 = AXIS2_PLACEMENT_3D('',#76970,#76971,#76972); +#76970 = CARTESIAN_POINT('',(1.85,0.55,0.)); +#76971 = DIRECTION('',(0.,1.,0.)); +#76972 = DIRECTION('',(1.,0.,0.)); +#76973 = ADVANCED_FACE('',(#76974),#76985,.T.); +#76974 = FACE_BOUND('',#76975,.T.); +#76975 = EDGE_LOOP('',(#76976,#76977,#76978)); +#76976 = ORIENTED_EDGE('',*,*,#75721,.F.); +#76977 = ORIENTED_EDGE('',*,*,#76864,.T.); +#76978 = ORIENTED_EDGE('',*,*,#76979,.T.); +#76979 = EDGE_CURVE('',#76865,#75714,#76980,.T.); +#76980 = CIRCLE('',#76981,0.2); +#76981 = AXIS2_PLACEMENT_3D('',#76982,#76983,#76984); +#76982 = CARTESIAN_POINT('',(2.242963248302,-0.55,0.2)); +#76983 = DIRECTION('',(0.,1.,0.)); +#76984 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#76985 = PLANE('',#76986); +#76986 = AXIS2_PLACEMENT_3D('',#76987,#76988,#76989); +#76987 = CARTESIAN_POINT('',(2.75,-0.55,0.)); +#76988 = DIRECTION('',(0.,-1.,0.)); +#76989 = DIRECTION('',(-1.,0.,0.)); +#76990 = ADVANCED_FACE('',(#76991),#77002,.T.); +#76991 = FACE_BOUND('',#76992,.T.); +#76992 = EDGE_LOOP('',(#76993,#76999,#77000,#77001)); +#76993 = ORIENTED_EDGE('',*,*,#76994,.F.); +#76994 = EDGE_CURVE('',#75690,#75714,#76995,.T.); +#76995 = LINE('',#76996,#76997); +#76996 = CARTESIAN_POINT('',(2.242963248302,-1.15,5.551115123126E-17)); +#76997 = VECTOR('',#76998,1.); +#76998 = DIRECTION('',(0.,1.,0.)); +#76999 = ORIENTED_EDGE('',*,*,#75697,.F.); +#77000 = ORIENTED_EDGE('',*,*,#75705,.F.); +#77001 = ORIENTED_EDGE('',*,*,#75713,.F.); +#77002 = PLANE('',#77003); +#77003 = AXIS2_PLACEMENT_3D('',#77004,#77005,#77006); +#77004 = CARTESIAN_POINT('',(2.242963248302,-0.85,5.551115123126E-17)); +#77005 = DIRECTION('',(1.412629589944E-16,0.,-1.)); +#77006 = DIRECTION('',(-1.,0.,-1.412629589944E-16)); +#77007 = ADVANCED_FACE('',(#77008),#77019,.T.); +#77008 = FACE_BOUND('',#77009,.T.); +#77009 = EDGE_LOOP('',(#77010,#77011,#77018)); +#77010 = ORIENTED_EDGE('',*,*,#75689,.F.); +#77011 = ORIENTED_EDGE('',*,*,#77012,.F.); +#77012 = EDGE_CURVE('',#76905,#75690,#77013,.T.); +#77013 = CIRCLE('',#77014,0.2); +#77014 = AXIS2_PLACEMENT_3D('',#77015,#77016,#77017); +#77015 = CARTESIAN_POINT('',(2.242963248302,-1.15,0.2)); +#77016 = DIRECTION('',(0.,1.,0.)); +#77017 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77018 = ORIENTED_EDGE('',*,*,#76912,.T.); +#77019 = PLANE('',#77020); +#77020 = AXIS2_PLACEMENT_3D('',#77021,#77022,#77023); +#77021 = CARTESIAN_POINT('',(1.85,-1.15,0.)); +#77022 = DIRECTION('',(0.,1.,0.)); +#77023 = DIRECTION('',(1.,0.,0.)); +#77024 = ADVANCED_FACE('',(#77025),#77032,.F.); +#77025 = FACE_BOUND('',#77026,.F.); +#77026 = EDGE_LOOP('',(#77027,#77028,#77029,#77030,#77031)); +#77027 = ORIENTED_EDGE('',*,*,#75912,.T.); +#77028 = ORIENTED_EDGE('',*,*,#76009,.F.); +#77029 = ORIENTED_EDGE('',*,*,#75994,.F.); +#77030 = ORIENTED_EDGE('',*,*,#76690,.F.); +#77031 = ORIENTED_EDGE('',*,*,#75673,.F.); +#77032 = PLANE('',#77033); +#77033 = AXIS2_PLACEMENT_3D('',#77034,#77035,#77036); +#77034 = CARTESIAN_POINT('',(-2.35,-1.6,0.)); +#77035 = DIRECTION('',(0.,1.,0.)); +#77036 = DIRECTION('',(1.,0.,0.)); +#77037 = ADVANCED_FACE('',(#77038),#77049,.T.); +#77038 = FACE_BOUND('',#77039,.F.); +#77039 = EDGE_LOOP('',(#77040,#77041,#77047,#77048)); +#77040 = ORIENTED_EDGE('',*,*,#76674,.F.); +#77041 = ORIENTED_EDGE('',*,*,#77042,.T.); +#77042 = EDGE_CURVE('',#76666,#75838,#77043,.T.); +#77043 = LINE('',#77044,#77045); +#77044 = CARTESIAN_POINT('',(2.25,1.6,0.45)); +#77045 = VECTOR('',#77046,1.); +#77046 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#77047 = ORIENTED_EDGE('',*,*,#75837,.T.); +#77048 = ORIENTED_EDGE('',*,*,#75817,.F.); +#77049 = PLANE('',#77050); +#77050 = AXIS2_PLACEMENT_3D('',#77051,#77052,#77053); +#77051 = CARTESIAN_POINT('',(2.35,1.6,0.45)); +#77052 = DIRECTION('',(0.,0.,-1.)); +#77053 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#77054 = ADVANCED_FACE('',(#77055),#77066,.T.); +#77055 = FACE_BOUND('',#77056,.T.); +#77056 = EDGE_LOOP('',(#77057,#77058,#77059,#77060)); +#77057 = ORIENTED_EDGE('',*,*,#76665,.T.); +#77058 = ORIENTED_EDGE('',*,*,#77042,.T.); +#77059 = ORIENTED_EDGE('',*,*,#75845,.F.); +#77060 = ORIENTED_EDGE('',*,*,#77061,.F.); +#77061 = EDGE_CURVE('',#76658,#75846,#77062,.T.); +#77062 = LINE('',#77063,#77064); +#77063 = CARTESIAN_POINT('',(2.35,1.6,0.55)); +#77064 = VECTOR('',#77065,1.); +#77065 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#77066 = CYLINDRICAL_SURFACE('',#77067,0.1); +#77067 = AXIS2_PLACEMENT_3D('',#77068,#77069,#77070); +#77068 = CARTESIAN_POINT('',(2.25,1.6,0.55)); +#77069 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#77070 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#77071 = ADVANCED_FACE('',(#77072),#77078,.T.); +#77072 = FACE_BOUND('',#77073,.F.); +#77073 = EDGE_LOOP('',(#77074,#77075,#77076,#77077)); +#77074 = ORIENTED_EDGE('',*,*,#76801,.T.); +#77075 = ORIENTED_EDGE('',*,*,#76793,.T.); +#77076 = ORIENTED_EDGE('',*,*,#75854,.T.); +#77077 = ORIENTED_EDGE('',*,*,#77061,.F.); +#77078 = PLANE('',#77079); +#77079 = AXIS2_PLACEMENT_3D('',#77080,#77081,#77082); +#77080 = CARTESIAN_POINT('',(2.35,1.6,0.9)); +#77081 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#77082 = DIRECTION('',(0.,0.,1.)); +#77083 = ADVANCED_FACE('',(#77084),#77095,.F.); +#77084 = FACE_BOUND('',#77085,.T.); +#77085 = EDGE_LOOP('',(#77086,#77087,#77088,#77094)); +#77086 = ORIENTED_EDGE('',*,*,#75862,.T.); +#77087 = ORIENTED_EDGE('',*,*,#75870,.T.); +#77088 = ORIENTED_EDGE('',*,*,#77089,.F.); +#77089 = EDGE_CURVE('',#76780,#75871,#77090,.T.); +#77090 = LINE('',#77091,#77092); +#77091 = CARTESIAN_POINT('',(2.35,1.75,1.25)); +#77092 = VECTOR('',#77093,1.); +#77093 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#77094 = ORIENTED_EDGE('',*,*,#76787,.F.); +#77095 = PLANE('',#77096); +#77096 = AXIS2_PLACEMENT_3D('',#77097,#77098,#77099); +#77097 = CARTESIAN_POINT('',(2.35,1.75,0.9)); +#77098 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#77099 = DIRECTION('',(0.,0.,-1.)); +#77100 = ADVANCED_FACE('',(#77101),#77143,.T.); +#77101 = FACE_BOUND('',#77102,.F.); +#77102 = EDGE_LOOP('',(#77103,#77111,#77119,#77127,#77135,#77142)); +#77103 = ORIENTED_EDGE('',*,*,#77104,.T.); +#77104 = EDGE_CURVE('',#75871,#77105,#77107,.T.); +#77105 = VERTEX_POINT('',#77106); +#77106 = CARTESIAN_POINT('',(1.7,1.6,1.5)); +#77107 = LINE('',#77108,#77109); +#77108 = CARTESIAN_POINT('',(1.7,1.75,1.25)); +#77109 = VECTOR('',#77110,1.); +#77110 = DIRECTION('',(-5.712050337472E-17,-0.514495755428, + 0.857492925712)); +#77111 = ORIENTED_EDGE('',*,*,#77112,.T.); +#77112 = EDGE_CURVE('',#77105,#77113,#77115,.T.); +#77113 = VERTEX_POINT('',#77114); +#77114 = CARTESIAN_POINT('',(1.7,1.55,1.5)); +#77115 = LINE('',#77116,#77117); +#77116 = CARTESIAN_POINT('',(1.7,1.75,1.5)); +#77117 = VECTOR('',#77118,1.); +#77118 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#77119 = ORIENTED_EDGE('',*,*,#77120,.T.); +#77120 = EDGE_CURVE('',#77113,#77121,#77123,.T.); +#77121 = VERTEX_POINT('',#77122); +#77122 = CARTESIAN_POINT('',(1.7,1.55,1.65)); +#77123 = LINE('',#77124,#77125); +#77124 = CARTESIAN_POINT('',(1.7,1.55,1.5)); +#77125 = VECTOR('',#77126,1.); +#77126 = DIRECTION('',(0.,0.,1.)); +#77127 = ORIENTED_EDGE('',*,*,#77128,.T.); +#77128 = EDGE_CURVE('',#77121,#77129,#77131,.T.); +#77129 = VERTEX_POINT('',#77130); +#77130 = CARTESIAN_POINT('',(1.7,1.6,1.65)); +#77131 = LINE('',#77132,#77133); +#77132 = CARTESIAN_POINT('',(1.7,1.55,1.65)); +#77133 = VECTOR('',#77134,1.); +#77134 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#77135 = ORIENTED_EDGE('',*,*,#77136,.T.); +#77136 = EDGE_CURVE('',#77129,#75879,#77137,.T.); +#77137 = CIRCLE('',#77138,0.15); +#77138 = AXIS2_PLACEMENT_3D('',#77139,#77140,#77141); +#77139 = CARTESIAN_POINT('',(1.7,1.6,1.5)); +#77140 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#77141 = DIRECTION('',(0.,0.,1.)); +#77142 = ORIENTED_EDGE('',*,*,#75878,.T.); +#77143 = PLANE('',#77144); +#77144 = AXIS2_PLACEMENT_3D('',#77145,#77146,#77147); +#77145 = CARTESIAN_POINT('',(1.7,1.6,1.5)); +#77146 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#77147 = DIRECTION('',(0.,0.,1.)); +#77148 = ADVANCED_FACE('',(#77149),#77160,.T.); +#77149 = FACE_BOUND('',#77150,.T.); +#77150 = EDGE_LOOP('',(#77151,#77157,#77158,#77159)); +#77151 = ORIENTED_EDGE('',*,*,#77152,.T.); +#77152 = EDGE_CURVE('',#76471,#77129,#77153,.T.); +#77153 = LINE('',#77154,#77155); +#77154 = CARTESIAN_POINT('',(-1.7,1.6,1.65)); +#77155 = VECTOR('',#77156,1.); +#77156 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#77157 = ORIENTED_EDGE('',*,*,#77136,.T.); +#77158 = ORIENTED_EDGE('',*,*,#75886,.F.); +#77159 = ORIENTED_EDGE('',*,*,#76478,.F.); +#77160 = CYLINDRICAL_SURFACE('',#77161,0.15); +#77161 = AXIS2_PLACEMENT_3D('',#77162,#77163,#77164); +#77162 = CARTESIAN_POINT('',(-0.85,1.6,1.5)); +#77163 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#77164 = DIRECTION('',(0.,0.,1.)); +#77165 = ADVANCED_FACE('',(#77166,#77307),#77411,.T.); +#77166 = FACE_BOUND('',#77167,.T.); +#77167 = EDGE_LOOP('',(#77168,#77169,#77170,#77171,#77172,#77180,#77188, + #77196,#77204,#77212,#77220,#77228,#77236,#77244,#77252,#77260, + #77268,#77276,#77284,#77290,#77291,#77292,#77293,#77294,#77295, + #77296,#77297,#77298,#77299,#77300,#77301,#77302,#77303,#77304, + #77305,#77306)); +#77168 = ORIENTED_EDGE('',*,*,#76362,.T.); +#77169 = ORIENTED_EDGE('',*,*,#76036,.T.); +#77170 = ORIENTED_EDGE('',*,*,#76060,.F.); +#77171 = ORIENTED_EDGE('',*,*,#76109,.F.); +#77172 = ORIENTED_EDGE('',*,*,#77173,.T.); +#77173 = EDGE_CURVE('',#76102,#77174,#77176,.T.); +#77174 = VERTEX_POINT('',#77175); +#77175 = CARTESIAN_POINT('',(2.15,-1.55,1.65)); +#77176 = LINE('',#77177,#77178); +#77177 = CARTESIAN_POINT('',(-2.15,-1.55,1.65)); +#77178 = VECTOR('',#77179,1.); +#77179 = DIRECTION('',(1.,0.,0.)); +#77180 = ORIENTED_EDGE('',*,*,#77181,.T.); +#77181 = EDGE_CURVE('',#77174,#77182,#77184,.T.); +#77182 = VERTEX_POINT('',#77183); +#77183 = CARTESIAN_POINT('',(2.15,-1.4,1.65)); +#77184 = LINE('',#77185,#77186); +#77185 = CARTESIAN_POINT('',(2.15,-1.55,1.65)); +#77186 = VECTOR('',#77187,1.); +#77187 = DIRECTION('',(0.,1.,0.)); +#77188 = ORIENTED_EDGE('',*,*,#77189,.F.); +#77189 = EDGE_CURVE('',#77190,#77182,#77192,.T.); +#77190 = VERTEX_POINT('',#77191); +#77191 = CARTESIAN_POINT('',(2.3,-1.4,1.65)); +#77192 = LINE('',#77193,#77194); +#77193 = CARTESIAN_POINT('',(2.3,-1.4,1.65)); +#77194 = VECTOR('',#77195,1.); +#77195 = DIRECTION('',(-1.,0.,0.)); +#77196 = ORIENTED_EDGE('',*,*,#77197,.F.); +#77197 = EDGE_CURVE('',#77198,#77190,#77200,.T.); +#77198 = VERTEX_POINT('',#77199); +#77199 = CARTESIAN_POINT('',(2.3,-0.9,1.65)); +#77200 = LINE('',#77201,#77202); +#77201 = CARTESIAN_POINT('',(2.3,-0.9,1.65)); +#77202 = VECTOR('',#77203,1.); +#77203 = DIRECTION('',(0.,-1.,0.)); +#77204 = ORIENTED_EDGE('',*,*,#77205,.F.); +#77205 = EDGE_CURVE('',#77206,#77198,#77208,.T.); +#77206 = VERTEX_POINT('',#77207); +#77207 = CARTESIAN_POINT('',(2.15,-0.9,1.65)); +#77208 = LINE('',#77209,#77210); +#77209 = CARTESIAN_POINT('',(2.15,-0.9,1.65)); +#77210 = VECTOR('',#77211,1.); +#77211 = DIRECTION('',(1.,0.,0.)); +#77212 = ORIENTED_EDGE('',*,*,#77213,.T.); +#77213 = EDGE_CURVE('',#77206,#77214,#77216,.T.); +#77214 = VERTEX_POINT('',#77215); +#77215 = CARTESIAN_POINT('',(2.15,-0.4,1.65)); +#77216 = LINE('',#77217,#77218); +#77217 = CARTESIAN_POINT('',(2.15,-1.55,1.65)); +#77218 = VECTOR('',#77219,1.); +#77219 = DIRECTION('',(0.,1.,0.)); +#77220 = ORIENTED_EDGE('',*,*,#77221,.T.); +#77221 = EDGE_CURVE('',#77214,#77222,#77224,.T.); +#77222 = VERTEX_POINT('',#77223); +#77223 = CARTESIAN_POINT('',(2.2,-0.4,1.65)); +#77224 = LINE('',#77225,#77226); +#77225 = CARTESIAN_POINT('',(2.15,-0.4,1.65)); +#77226 = VECTOR('',#77227,1.); +#77227 = DIRECTION('',(1.,0.,0.)); +#77228 = ORIENTED_EDGE('',*,*,#77229,.T.); +#77229 = EDGE_CURVE('',#77222,#77230,#77232,.T.); +#77230 = VERTEX_POINT('',#77231); +#77231 = CARTESIAN_POINT('',(2.2,0.4,1.65)); +#77232 = LINE('',#77233,#77234); +#77233 = CARTESIAN_POINT('',(2.2,-0.4,1.65)); +#77234 = VECTOR('',#77235,1.); +#77235 = DIRECTION('',(0.,1.,0.)); +#77236 = ORIENTED_EDGE('',*,*,#77237,.F.); +#77237 = EDGE_CURVE('',#77238,#77230,#77240,.T.); +#77238 = VERTEX_POINT('',#77239); +#77239 = CARTESIAN_POINT('',(2.15,0.4,1.65)); +#77240 = LINE('',#77241,#77242); +#77241 = CARTESIAN_POINT('',(2.15,0.4,1.65)); +#77242 = VECTOR('',#77243,1.); +#77243 = DIRECTION('',(1.,0.,0.)); +#77244 = ORIENTED_EDGE('',*,*,#77245,.T.); +#77245 = EDGE_CURVE('',#77238,#77246,#77248,.T.); +#77246 = VERTEX_POINT('',#77247); +#77247 = CARTESIAN_POINT('',(2.15,0.9,1.65)); +#77248 = LINE('',#77249,#77250); +#77249 = CARTESIAN_POINT('',(2.15,-1.55,1.65)); +#77250 = VECTOR('',#77251,1.); +#77251 = DIRECTION('',(0.,1.,0.)); +#77252 = ORIENTED_EDGE('',*,*,#77253,.F.); +#77253 = EDGE_CURVE('',#77254,#77246,#77256,.T.); +#77254 = VERTEX_POINT('',#77255); +#77255 = CARTESIAN_POINT('',(2.3,0.9,1.65)); +#77256 = LINE('',#77257,#77258); +#77257 = CARTESIAN_POINT('',(2.3,0.9,1.65)); +#77258 = VECTOR('',#77259,1.); +#77259 = DIRECTION('',(-1.,0.,0.)); +#77260 = ORIENTED_EDGE('',*,*,#77261,.F.); +#77261 = EDGE_CURVE('',#77262,#77254,#77264,.T.); +#77262 = VERTEX_POINT('',#77263); +#77263 = CARTESIAN_POINT('',(2.3,1.4,1.65)); +#77264 = LINE('',#77265,#77266); +#77265 = CARTESIAN_POINT('',(2.3,1.4,1.65)); +#77266 = VECTOR('',#77267,1.); +#77267 = DIRECTION('',(0.,-1.,0.)); +#77268 = ORIENTED_EDGE('',*,*,#77269,.F.); +#77269 = EDGE_CURVE('',#77270,#77262,#77272,.T.); +#77270 = VERTEX_POINT('',#77271); +#77271 = CARTESIAN_POINT('',(2.15,1.4,1.65)); +#77272 = LINE('',#77273,#77274); +#77273 = CARTESIAN_POINT('',(2.15,1.4,1.65)); +#77274 = VECTOR('',#77275,1.); +#77275 = DIRECTION('',(1.,0.,0.)); +#77276 = ORIENTED_EDGE('',*,*,#77277,.T.); +#77277 = EDGE_CURVE('',#77270,#77278,#77280,.T.); +#77278 = VERTEX_POINT('',#77279); +#77279 = CARTESIAN_POINT('',(2.15,1.55,1.65)); +#77280 = LINE('',#77281,#77282); +#77281 = CARTESIAN_POINT('',(2.15,-1.55,1.65)); +#77282 = VECTOR('',#77283,1.); +#77283 = DIRECTION('',(0.,1.,0.)); +#77284 = ORIENTED_EDGE('',*,*,#77285,.T.); +#77285 = EDGE_CURVE('',#77278,#77121,#77286,.T.); +#77286 = LINE('',#77287,#77288); +#77287 = CARTESIAN_POINT('',(2.15,1.55,1.65)); +#77288 = VECTOR('',#77289,1.); +#77289 = DIRECTION('',(-1.,0.,0.)); +#77290 = ORIENTED_EDGE('',*,*,#77128,.T.); +#77291 = ORIENTED_EDGE('',*,*,#77152,.F.); +#77292 = ORIENTED_EDGE('',*,*,#76470,.F.); +#77293 = ORIENTED_EDGE('',*,*,#76496,.T.); +#77294 = ORIENTED_EDGE('',*,*,#76520,.T.); +#77295 = ORIENTED_EDGE('',*,*,#76543,.T.); +#77296 = ORIENTED_EDGE('',*,*,#76567,.T.); +#77297 = ORIENTED_EDGE('',*,*,#76591,.T.); +#77298 = ORIENTED_EDGE('',*,*,#76616,.T.); +#77299 = ORIENTED_EDGE('',*,*,#76641,.T.); +#77300 = ORIENTED_EDGE('',*,*,#76413,.T.); +#77301 = ORIENTED_EDGE('',*,*,#76217,.F.); +#77302 = ORIENTED_EDGE('',*,*,#76242,.T.); +#77303 = ORIENTED_EDGE('',*,*,#76265,.T.); +#77304 = ORIENTED_EDGE('',*,*,#76289,.T.); +#77305 = ORIENTED_EDGE('',*,*,#76313,.T.); +#77306 = ORIENTED_EDGE('',*,*,#76338,.T.); +#77307 = FACE_BOUND('',#77308,.T.); +#77308 = EDGE_LOOP('',(#77309,#77320,#77328,#77337,#77345,#77354,#77362, + #77371,#77379,#77388,#77396,#77405)); +#77309 = ORIENTED_EDGE('',*,*,#77310,.T.); +#77310 = EDGE_CURVE('',#77311,#77313,#77315,.T.); +#77311 = VERTEX_POINT('',#77312); +#77312 = CARTESIAN_POINT('',(0.632455532034,-0.9,1.65)); +#77313 = VERTEX_POINT('',#77314); +#77314 = CARTESIAN_POINT('',(-0.632455532034,-0.9,1.65)); +#77315 = CIRCLE('',#77316,1.1); +#77316 = AXIS2_PLACEMENT_3D('',#77317,#77318,#77319); +#77317 = CARTESIAN_POINT('',(0.,0.,1.65)); +#77318 = DIRECTION('',(0.,0.,-1.)); +#77319 = DIRECTION('',(1.,0.,0.)); +#77320 = ORIENTED_EDGE('',*,*,#77321,.T.); +#77321 = EDGE_CURVE('',#77313,#77322,#77324,.T.); +#77322 = VERTEX_POINT('',#77323); +#77323 = CARTESIAN_POINT('',(-1.3,-0.9,1.65)); +#77324 = LINE('',#77325,#77326); +#77325 = CARTESIAN_POINT('',(-0.7,-0.9,1.65)); +#77326 = VECTOR('',#77327,1.); +#77327 = DIRECTION('',(-1.,0.,0.)); +#77328 = ORIENTED_EDGE('',*,*,#77329,.F.); +#77329 = EDGE_CURVE('',#77330,#77322,#77332,.T.); +#77330 = VERTEX_POINT('',#77331); +#77331 = CARTESIAN_POINT('',(-1.4,-0.8,1.65)); +#77332 = CIRCLE('',#77333,0.1); +#77333 = AXIS2_PLACEMENT_3D('',#77334,#77335,#77336); +#77334 = CARTESIAN_POINT('',(-1.3,-0.8,1.65)); +#77335 = DIRECTION('',(-0.,0.,1.)); +#77336 = DIRECTION('',(0.,-1.,0.)); +#77337 = ORIENTED_EDGE('',*,*,#77338,.T.); +#77338 = EDGE_CURVE('',#77330,#77339,#77341,.T.); +#77339 = VERTEX_POINT('',#77340); +#77340 = CARTESIAN_POINT('',(-1.4,0.8,1.65)); +#77341 = LINE('',#77342,#77343); +#77342 = CARTESIAN_POINT('',(-1.4,0.45,1.65)); +#77343 = VECTOR('',#77344,1.); +#77344 = DIRECTION('',(0.,1.,0.)); +#77345 = ORIENTED_EDGE('',*,*,#77346,.F.); +#77346 = EDGE_CURVE('',#77347,#77339,#77349,.T.); +#77347 = VERTEX_POINT('',#77348); +#77348 = CARTESIAN_POINT('',(-1.3,0.9,1.65)); +#77349 = CIRCLE('',#77350,0.1); +#77350 = AXIS2_PLACEMENT_3D('',#77351,#77352,#77353); +#77351 = CARTESIAN_POINT('',(-1.3,0.8,1.65)); +#77352 = DIRECTION('',(0.,-0.,1.)); +#77353 = DIRECTION('',(0.,1.,0.)); +#77354 = ORIENTED_EDGE('',*,*,#77355,.T.); +#77355 = EDGE_CURVE('',#77347,#77356,#77358,.T.); +#77356 = VERTEX_POINT('',#77357); +#77357 = CARTESIAN_POINT('',(-0.632455532034,0.9,1.65)); +#77358 = LINE('',#77359,#77360); +#77359 = CARTESIAN_POINT('',(0.7,0.9,1.65)); +#77360 = VECTOR('',#77361,1.); +#77361 = DIRECTION('',(1.,0.,0.)); +#77362 = ORIENTED_EDGE('',*,*,#77363,.T.); +#77363 = EDGE_CURVE('',#77356,#77364,#77366,.T.); +#77364 = VERTEX_POINT('',#77365); +#77365 = CARTESIAN_POINT('',(0.632455532034,0.9,1.65)); +#77366 = CIRCLE('',#77367,1.1); +#77367 = AXIS2_PLACEMENT_3D('',#77368,#77369,#77370); +#77368 = CARTESIAN_POINT('',(0.,0.,1.65)); +#77369 = DIRECTION('',(0.,0.,-1.)); +#77370 = DIRECTION('',(1.,0.,0.)); +#77371 = ORIENTED_EDGE('',*,*,#77372,.T.); +#77372 = EDGE_CURVE('',#77364,#77373,#77375,.T.); +#77373 = VERTEX_POINT('',#77374); +#77374 = CARTESIAN_POINT('',(1.3,0.9,1.65)); +#77375 = LINE('',#77376,#77377); +#77376 = CARTESIAN_POINT('',(0.7,0.9,1.65)); +#77377 = VECTOR('',#77378,1.); +#77378 = DIRECTION('',(1.,0.,0.)); +#77379 = ORIENTED_EDGE('',*,*,#77380,.F.); +#77380 = EDGE_CURVE('',#77381,#77373,#77383,.T.); +#77381 = VERTEX_POINT('',#77382); +#77382 = CARTESIAN_POINT('',(1.4,0.8,1.65)); +#77383 = CIRCLE('',#77384,0.1); +#77384 = AXIS2_PLACEMENT_3D('',#77385,#77386,#77387); +#77385 = CARTESIAN_POINT('',(1.3,0.8,1.65)); +#77386 = DIRECTION('',(0.,0.,1.)); +#77387 = DIRECTION('',(1.,0.,-0.)); +#77388 = ORIENTED_EDGE('',*,*,#77389,.T.); +#77389 = EDGE_CURVE('',#77381,#77390,#77392,.T.); +#77390 = VERTEX_POINT('',#77391); +#77391 = CARTESIAN_POINT('',(1.4,-0.8,1.65)); +#77392 = LINE('',#77393,#77394); +#77393 = CARTESIAN_POINT('',(1.4,-0.45,1.65)); +#77394 = VECTOR('',#77395,1.); +#77395 = DIRECTION('',(0.,-1.,0.)); +#77396 = ORIENTED_EDGE('',*,*,#77397,.F.); +#77397 = EDGE_CURVE('',#77398,#77390,#77400,.T.); +#77398 = VERTEX_POINT('',#77399); +#77399 = CARTESIAN_POINT('',(1.3,-0.9,1.65)); +#77400 = CIRCLE('',#77401,0.1); +#77401 = AXIS2_PLACEMENT_3D('',#77402,#77403,#77404); +#77402 = CARTESIAN_POINT('',(1.3,-0.8,1.65)); +#77403 = DIRECTION('',(-0.,0.,1.)); +#77404 = DIRECTION('',(0.,-1.,0.)); +#77405 = ORIENTED_EDGE('',*,*,#77406,.T.); +#77406 = EDGE_CURVE('',#77398,#77311,#77407,.T.); +#77407 = LINE('',#77408,#77409); +#77408 = CARTESIAN_POINT('',(-0.7,-0.9,1.65)); +#77409 = VECTOR('',#77410,1.); +#77410 = DIRECTION('',(-1.,0.,0.)); +#77411 = PLANE('',#77412); +#77412 = AXIS2_PLACEMENT_3D('',#77413,#77414,#77415); +#77413 = CARTESIAN_POINT('',(0.,-6.001205538514E-17,1.65)); +#77414 = DIRECTION('',(0.,0.,1.)); +#77415 = DIRECTION('',(1.,0.,-0.)); +#77416 = ADVANCED_FACE('',(#77417),#77428,.F.); +#77417 = FACE_BOUND('',#77418,.F.); +#77418 = EDGE_LOOP('',(#77419,#77420,#77421,#77427)); +#77419 = ORIENTED_EDGE('',*,*,#76127,.T.); +#77420 = ORIENTED_EDGE('',*,*,#76085,.T.); +#77421 = ORIENTED_EDGE('',*,*,#77422,.T.); +#77422 = EDGE_CURVE('',#76086,#76700,#77423,.T.); +#77423 = LINE('',#77424,#77425); +#77424 = CARTESIAN_POINT('',(-2.35,-1.6,1.5)); +#77425 = VECTOR('',#77426,1.); +#77426 = DIRECTION('',(1.,0.,0.)); +#77427 = ORIENTED_EDGE('',*,*,#76699,.F.); +#77428 = PLANE('',#77429); +#77429 = AXIS2_PLACEMENT_3D('',#77430,#77431,#77432); +#77430 = CARTESIAN_POINT('',(2.35,-1.75,1.25)); +#77431 = DIRECTION('',(1.904016779158E-16,0.857492925712,-0.514495755428 + )); +#77432 = DIRECTION('',(1.142410067494E-16,0.514495755428,0.857492925712) + ); +#77433 = ADVANCED_FACE('',(#77434),#77452,.F.); +#77434 = FACE_BOUND('',#77435,.F.); +#77435 = EDGE_LOOP('',(#77436,#77444,#77445,#77446)); +#77436 = ORIENTED_EDGE('',*,*,#77437,.F.); +#77437 = EDGE_CURVE('',#76094,#77438,#77440,.T.); +#77438 = VERTEX_POINT('',#77439); +#77439 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77440 = LINE('',#77441,#77442); +#77441 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#77442 = VECTOR('',#77443,1.); +#77443 = DIRECTION('',(1.,0.,0.)); +#77444 = ORIENTED_EDGE('',*,*,#76101,.T.); +#77445 = ORIENTED_EDGE('',*,*,#77173,.T.); +#77446 = ORIENTED_EDGE('',*,*,#77447,.F.); +#77447 = EDGE_CURVE('',#77438,#77174,#77448,.T.); +#77448 = LINE('',#77449,#77450); +#77449 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77450 = VECTOR('',#77451,1.); +#77451 = DIRECTION('',(0.,0.,1.)); +#77452 = PLANE('',#77453); +#77453 = AXIS2_PLACEMENT_3D('',#77454,#77455,#77456); +#77454 = CARTESIAN_POINT('',(-2.15,-1.55,1.5)); +#77455 = DIRECTION('',(0.,1.,0.)); +#77456 = DIRECTION('',(1.,0.,0.)); +#77457 = ADVANCED_FACE('',(#77458),#77518,.T.); +#77458 = FACE_BOUND('',#77459,.T.); +#77459 = EDGE_LOOP('',(#77460,#77468,#77476,#77484,#77492,#77500,#77508, + #77514,#77515,#77516,#77517)); +#77460 = ORIENTED_EDGE('',*,*,#77461,.T.); +#77461 = EDGE_CURVE('',#76708,#77462,#77464,.T.); +#77462 = VERTEX_POINT('',#77463); +#77463 = CARTESIAN_POINT('',(2.2,-0.4,1.5)); +#77464 = LINE('',#77465,#77466); +#77465 = CARTESIAN_POINT('',(1.1,-0.4,1.5)); +#77466 = VECTOR('',#77467,1.); +#77467 = DIRECTION('',(-1.,0.,0.)); +#77468 = ORIENTED_EDGE('',*,*,#77469,.T.); +#77469 = EDGE_CURVE('',#77462,#77470,#77472,.T.); +#77470 = VERTEX_POINT('',#77471); +#77471 = CARTESIAN_POINT('',(2.15,-0.4,1.5)); +#77472 = LINE('',#77473,#77474); +#77473 = CARTESIAN_POINT('',(2.35,-0.4,1.5)); +#77474 = VECTOR('',#77475,1.); +#77475 = DIRECTION('',(-1.,-0.,-0.)); +#77476 = ORIENTED_EDGE('',*,*,#77477,.F.); +#77477 = EDGE_CURVE('',#77478,#77470,#77480,.T.); +#77478 = VERTEX_POINT('',#77479); +#77479 = CARTESIAN_POINT('',(2.15,-0.9,1.5)); +#77480 = LINE('',#77481,#77482); +#77481 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77482 = VECTOR('',#77483,1.); +#77483 = DIRECTION('',(0.,1.,0.)); +#77484 = ORIENTED_EDGE('',*,*,#77485,.T.); +#77485 = EDGE_CURVE('',#77478,#77486,#77488,.T.); +#77486 = VERTEX_POINT('',#77487); +#77487 = CARTESIAN_POINT('',(2.3,-0.9,1.5)); +#77488 = LINE('',#77489,#77490); +#77489 = CARTESIAN_POINT('',(2.15,-0.9,1.5)); +#77490 = VECTOR('',#77491,1.); +#77491 = DIRECTION('',(1.,0.,0.)); +#77492 = ORIENTED_EDGE('',*,*,#77493,.T.); +#77493 = EDGE_CURVE('',#77486,#77494,#77496,.T.); +#77494 = VERTEX_POINT('',#77495); +#77495 = CARTESIAN_POINT('',(2.3,-1.4,1.5)); +#77496 = LINE('',#77497,#77498); +#77497 = CARTESIAN_POINT('',(2.3,-0.9,1.5)); +#77498 = VECTOR('',#77499,1.); +#77499 = DIRECTION('',(0.,-1.,0.)); +#77500 = ORIENTED_EDGE('',*,*,#77501,.T.); +#77501 = EDGE_CURVE('',#77494,#77502,#77504,.T.); +#77502 = VERTEX_POINT('',#77503); +#77503 = CARTESIAN_POINT('',(2.15,-1.4,1.5)); +#77504 = LINE('',#77505,#77506); +#77505 = CARTESIAN_POINT('',(2.3,-1.4,1.5)); +#77506 = VECTOR('',#77507,1.); +#77507 = DIRECTION('',(-1.,0.,0.)); +#77508 = ORIENTED_EDGE('',*,*,#77509,.F.); +#77509 = EDGE_CURVE('',#77438,#77502,#77510,.T.); +#77510 = LINE('',#77511,#77512); +#77511 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77512 = VECTOR('',#77513,1.); +#77513 = DIRECTION('',(0.,1.,0.)); +#77514 = ORIENTED_EDGE('',*,*,#77437,.F.); +#77515 = ORIENTED_EDGE('',*,*,#76093,.F.); +#77516 = ORIENTED_EDGE('',*,*,#77422,.T.); +#77517 = ORIENTED_EDGE('',*,*,#76707,.T.); +#77518 = PLANE('',#77519); +#77519 = AXIS2_PLACEMENT_3D('',#77520,#77521,#77522); +#77520 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,1.5 + )); +#77521 = DIRECTION('',(0.,0.,1.)); +#77522 = DIRECTION('',(1.,0.,-0.)); +#77523 = ADVANCED_FACE('',(#77524),#77559,.F.); +#77524 = FACE_BOUND('',#77525,.F.); +#77525 = EDGE_LOOP('',(#77526,#77536,#77544,#77551,#77552,#77553)); +#77526 = ORIENTED_EDGE('',*,*,#77527,.T.); +#77527 = EDGE_CURVE('',#77528,#77530,#77532,.T.); +#77528 = VERTEX_POINT('',#77529); +#77529 = CARTESIAN_POINT('',(2.583589941132,-1.15,0.710940039245)); +#77530 = VERTEX_POINT('',#77531); +#77531 = CARTESIAN_POINT('',(2.75,-1.15,0.6)); +#77532 = LINE('',#77533,#77534); +#77533 = CARTESIAN_POINT('',(2.583589941132,-1.15,0.710940039245)); +#77534 = VECTOR('',#77535,1.); +#77535 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77536 = ORIENTED_EDGE('',*,*,#77537,.T.); +#77537 = EDGE_CURVE('',#77530,#77538,#77540,.T.); +#77538 = VERTEX_POINT('',#77539); +#77539 = CARTESIAN_POINT('',(2.40937330717,-1.15,8.905996075495E-02)); +#77540 = LINE('',#77541,#77542); +#77541 = CARTESIAN_POINT('',(2.75,-1.15,0.6)); +#77542 = VECTOR('',#77543,1.); +#77543 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#77544 = ORIENTED_EDGE('',*,*,#77545,.T.); +#77545 = EDGE_CURVE('',#77538,#76905,#77546,.T.); +#77546 = CIRCLE('',#77547,0.2); +#77547 = AXIS2_PLACEMENT_3D('',#77548,#77549,#77550); +#77548 = CARTESIAN_POINT('',(2.242963248302,-1.15,0.2)); +#77549 = DIRECTION('',(0.,1.,0.)); +#77550 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77551 = ORIENTED_EDGE('',*,*,#76904,.F.); +#77552 = ORIENTED_EDGE('',*,*,#76896,.F.); +#77553 = ORIENTED_EDGE('',*,*,#77554,.T.); +#77554 = EDGE_CURVE('',#76889,#77528,#77555,.T.); +#77555 = LINE('',#77556,#77557); +#77556 = CARTESIAN_POINT('',(2.242963248302,-1.15,0.2)); +#77557 = VECTOR('',#77558,1.); +#77558 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77559 = PLANE('',#77560); +#77560 = AXIS2_PLACEMENT_3D('',#77561,#77562,#77563); +#77561 = CARTESIAN_POINT('',(2.312197727425,-1.15,0.2786641916)); +#77562 = DIRECTION('',(0.,1.,0.)); +#77563 = DIRECTION('',(0.,-0.,1.)); +#77564 = ADVANCED_FACE('',(#77565),#77583,.T.); +#77565 = FACE_BOUND('',#77566,.T.); +#77566 = EDGE_LOOP('',(#77567,#77568,#77569,#77577)); +#77567 = ORIENTED_EDGE('',*,*,#76888,.F.); +#77568 = ORIENTED_EDGE('',*,*,#77554,.T.); +#77569 = ORIENTED_EDGE('',*,*,#77570,.F.); +#77570 = EDGE_CURVE('',#77571,#77528,#77573,.T.); +#77571 = VERTEX_POINT('',#77572); +#77572 = CARTESIAN_POINT('',(2.583589941132,-0.55,0.710940039245)); +#77573 = LINE('',#77574,#77575); +#77574 = CARTESIAN_POINT('',(2.583589941132,-0.55,0.710940039245)); +#77575 = VECTOR('',#77576,1.); +#77576 = DIRECTION('',(0.,-1.,0.)); +#77577 = ORIENTED_EDGE('',*,*,#77578,.F.); +#77578 = EDGE_CURVE('',#76881,#77571,#77579,.T.); +#77579 = LINE('',#77580,#77581); +#77580 = CARTESIAN_POINT('',(2.242963248302,-0.55,0.2)); +#77581 = VECTOR('',#77582,1.); +#77582 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77583 = PLANE('',#77584); +#77584 = AXIS2_PLACEMENT_3D('',#77585,#77586,#77587); +#77585 = CARTESIAN_POINT('',(2.242963248302,-0.85,0.2)); +#77586 = DIRECTION('',(-0.832050294338,0.,0.554700196225)); +#77587 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77588 = ADVANCED_FACE('',(#77589),#77617,.T.); +#77589 = FACE_BOUND('',#77590,.T.); +#77590 = EDGE_LOOP('',(#77591,#77599,#77607,#77614,#77615,#77616)); +#77591 = ORIENTED_EDGE('',*,*,#77592,.T.); +#77592 = EDGE_CURVE('',#77571,#77593,#77595,.T.); +#77593 = VERTEX_POINT('',#77594); +#77594 = CARTESIAN_POINT('',(2.75,-0.55,0.6)); +#77595 = LINE('',#77596,#77597); +#77596 = CARTESIAN_POINT('',(2.583589941132,-0.55,0.710940039245)); +#77597 = VECTOR('',#77598,1.); +#77598 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77599 = ORIENTED_EDGE('',*,*,#77600,.T.); +#77600 = EDGE_CURVE('',#77593,#77601,#77603,.T.); +#77601 = VERTEX_POINT('',#77602); +#77602 = CARTESIAN_POINT('',(2.40937330717,-0.55,8.905996075495E-02)); +#77603 = LINE('',#77604,#77605); +#77604 = CARTESIAN_POINT('',(2.75,-0.55,0.6)); +#77605 = VECTOR('',#77606,1.); +#77606 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#77607 = ORIENTED_EDGE('',*,*,#77608,.T.); +#77608 = EDGE_CURVE('',#77601,#76865,#77609,.T.); +#77609 = CIRCLE('',#77610,0.2); +#77610 = AXIS2_PLACEMENT_3D('',#77611,#77612,#77613); +#77611 = CARTESIAN_POINT('',(2.242963248302,-0.55,0.2)); +#77612 = DIRECTION('',(0.,1.,0.)); +#77613 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77614 = ORIENTED_EDGE('',*,*,#76872,.T.); +#77615 = ORIENTED_EDGE('',*,*,#76880,.F.); +#77616 = ORIENTED_EDGE('',*,*,#77578,.T.); +#77617 = PLANE('',#77618); +#77618 = AXIS2_PLACEMENT_3D('',#77619,#77620,#77621); +#77619 = CARTESIAN_POINT('',(2.312197727425,-0.55,0.2786641916)); +#77620 = DIRECTION('',(0.,1.,0.)); +#77621 = DIRECTION('',(0.,-0.,1.)); +#77622 = ADVANCED_FACE('',(#77623),#77658,.F.); +#77623 = FACE_BOUND('',#77624,.F.); +#77624 = EDGE_LOOP('',(#77625,#77635,#77643,#77650,#77651,#77652)); +#77625 = ORIENTED_EDGE('',*,*,#77626,.T.); +#77626 = EDGE_CURVE('',#77627,#77629,#77631,.T.); +#77627 = VERTEX_POINT('',#77628); +#77628 = CARTESIAN_POINT('',(2.583589941132,0.55,0.710940039245)); +#77629 = VERTEX_POINT('',#77630); +#77630 = CARTESIAN_POINT('',(2.75,0.55,0.6)); +#77631 = LINE('',#77632,#77633); +#77632 = CARTESIAN_POINT('',(2.583589941132,0.55,0.710940039245)); +#77633 = VECTOR('',#77634,1.); +#77634 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77635 = ORIENTED_EDGE('',*,*,#77636,.T.); +#77636 = EDGE_CURVE('',#77629,#77637,#77639,.T.); +#77637 = VERTEX_POINT('',#77638); +#77638 = CARTESIAN_POINT('',(2.40937330717,0.55,8.905996075495E-02)); +#77639 = LINE('',#77640,#77641); +#77640 = CARTESIAN_POINT('',(2.75,0.55,0.6)); +#77641 = VECTOR('',#77642,1.); +#77642 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#77643 = ORIENTED_EDGE('',*,*,#77644,.T.); +#77644 = EDGE_CURVE('',#77637,#76850,#77645,.T.); +#77645 = CIRCLE('',#77646,0.2); +#77646 = AXIS2_PLACEMENT_3D('',#77647,#77648,#77649); +#77647 = CARTESIAN_POINT('',(2.242963248302,0.55,0.2)); +#77648 = DIRECTION('',(0.,1.,0.)); +#77649 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77650 = ORIENTED_EDGE('',*,*,#76849,.F.); +#77651 = ORIENTED_EDGE('',*,*,#76841,.F.); +#77652 = ORIENTED_EDGE('',*,*,#77653,.T.); +#77653 = EDGE_CURVE('',#76834,#77627,#77654,.T.); +#77654 = LINE('',#77655,#77656); +#77655 = CARTESIAN_POINT('',(2.242963248302,0.55,0.2)); +#77656 = VECTOR('',#77657,1.); +#77657 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77658 = PLANE('',#77659); +#77659 = AXIS2_PLACEMENT_3D('',#77660,#77661,#77662); +#77660 = CARTESIAN_POINT('',(2.312197727425,0.55,0.2786641916)); +#77661 = DIRECTION('',(0.,1.,0.)); +#77662 = DIRECTION('',(0.,-0.,1.)); +#77663 = ADVANCED_FACE('',(#77664),#77682,.T.); +#77664 = FACE_BOUND('',#77665,.T.); +#77665 = EDGE_LOOP('',(#77666,#77667,#77668,#77676)); +#77666 = ORIENTED_EDGE('',*,*,#76833,.F.); +#77667 = ORIENTED_EDGE('',*,*,#77653,.T.); +#77668 = ORIENTED_EDGE('',*,*,#77669,.F.); +#77669 = EDGE_CURVE('',#77670,#77627,#77672,.T.); +#77670 = VERTEX_POINT('',#77671); +#77671 = CARTESIAN_POINT('',(2.583589941132,1.15,0.710940039245)); +#77672 = LINE('',#77673,#77674); +#77673 = CARTESIAN_POINT('',(2.583589941132,1.15,0.710940039245)); +#77674 = VECTOR('',#77675,1.); +#77675 = DIRECTION('',(0.,-1.,0.)); +#77676 = ORIENTED_EDGE('',*,*,#77677,.F.); +#77677 = EDGE_CURVE('',#76826,#77670,#77678,.T.); +#77678 = LINE('',#77679,#77680); +#77679 = CARTESIAN_POINT('',(2.242963248302,1.15,0.2)); +#77680 = VECTOR('',#77681,1.); +#77681 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77682 = PLANE('',#77683); +#77683 = AXIS2_PLACEMENT_3D('',#77684,#77685,#77686); +#77684 = CARTESIAN_POINT('',(2.242963248302,0.85,0.2)); +#77685 = DIRECTION('',(-0.832050294338,0.,0.554700196225)); +#77686 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#77687 = ADVANCED_FACE('',(#77688),#77716,.T.); +#77688 = FACE_BOUND('',#77689,.T.); +#77689 = EDGE_LOOP('',(#77690,#77698,#77706,#77713,#77714,#77715)); +#77690 = ORIENTED_EDGE('',*,*,#77691,.T.); +#77691 = EDGE_CURVE('',#77670,#77692,#77694,.T.); +#77692 = VERTEX_POINT('',#77693); +#77693 = CARTESIAN_POINT('',(2.75,1.15,0.6)); +#77694 = LINE('',#77695,#77696); +#77695 = CARTESIAN_POINT('',(2.583589941132,1.15,0.710940039245)); +#77696 = VECTOR('',#77697,1.); +#77697 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77698 = ORIENTED_EDGE('',*,*,#77699,.T.); +#77699 = EDGE_CURVE('',#77692,#77700,#77702,.T.); +#77700 = VERTEX_POINT('',#77701); +#77701 = CARTESIAN_POINT('',(2.40937330717,1.15,8.905996075495E-02)); +#77702 = LINE('',#77703,#77704); +#77703 = CARTESIAN_POINT('',(2.75,1.15,0.6)); +#77704 = VECTOR('',#77705,1.); +#77705 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#77706 = ORIENTED_EDGE('',*,*,#77707,.T.); +#77707 = EDGE_CURVE('',#77700,#76810,#77708,.T.); +#77708 = CIRCLE('',#77709,0.2); +#77709 = AXIS2_PLACEMENT_3D('',#77710,#77711,#77712); +#77710 = CARTESIAN_POINT('',(2.242963248302,1.15,0.2)); +#77711 = DIRECTION('',(0.,1.,0.)); +#77712 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77713 = ORIENTED_EDGE('',*,*,#76817,.T.); +#77714 = ORIENTED_EDGE('',*,*,#76825,.F.); +#77715 = ORIENTED_EDGE('',*,*,#77677,.T.); +#77716 = PLANE('',#77717); +#77717 = AXIS2_PLACEMENT_3D('',#77718,#77719,#77720); +#77718 = CARTESIAN_POINT('',(2.312197727425,1.15,0.2786641916)); +#77719 = DIRECTION('',(0.,1.,0.)); +#77720 = DIRECTION('',(0.,-0.,1.)); +#77721 = ADVANCED_FACE('',(#77722),#77733,.F.); +#77722 = FACE_BOUND('',#77723,.T.); +#77723 = EDGE_LOOP('',(#77724,#77725,#77726,#77732)); +#77724 = ORIENTED_EDGE('',*,*,#77089,.T.); +#77725 = ORIENTED_EDGE('',*,*,#77104,.T.); +#77726 = ORIENTED_EDGE('',*,*,#77727,.F.); +#77727 = EDGE_CURVE('',#76772,#77105,#77728,.T.); +#77728 = LINE('',#77729,#77730); +#77729 = CARTESIAN_POINT('',(2.35,1.6,1.5)); +#77730 = VECTOR('',#77731,1.); +#77731 = DIRECTION('',(-1.,0.,0.)); +#77732 = ORIENTED_EDGE('',*,*,#76779,.F.); +#77733 = PLANE('',#77734); +#77734 = AXIS2_PLACEMENT_3D('',#77735,#77736,#77737); +#77735 = CARTESIAN_POINT('',(2.35,1.75,1.25)); +#77736 = DIRECTION('',(-9.520083895787E-17,-0.857492925712, + -0.514495755428)); +#77737 = DIRECTION('',(5.712050337472E-17,0.514495755428,-0.857492925712 + )); +#77738 = ADVANCED_FACE('',(#77739),#77806,.T.); +#77739 = FACE_BOUND('',#77740,.T.); +#77740 = EDGE_LOOP('',(#77741,#77742,#77743,#77744,#77752,#77760,#77768, + #77776,#77784,#77792,#77800)); +#77741 = ORIENTED_EDGE('',*,*,#76771,.T.); +#77742 = ORIENTED_EDGE('',*,*,#77727,.T.); +#77743 = ORIENTED_EDGE('',*,*,#77112,.T.); +#77744 = ORIENTED_EDGE('',*,*,#77745,.F.); +#77745 = EDGE_CURVE('',#77746,#77113,#77748,.T.); +#77746 = VERTEX_POINT('',#77747); +#77747 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#77748 = LINE('',#77749,#77750); +#77749 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#77750 = VECTOR('',#77751,1.); +#77751 = DIRECTION('',(-1.,0.,0.)); +#77752 = ORIENTED_EDGE('',*,*,#77753,.F.); +#77753 = EDGE_CURVE('',#77754,#77746,#77756,.T.); +#77754 = VERTEX_POINT('',#77755); +#77755 = CARTESIAN_POINT('',(2.15,1.4,1.5)); +#77756 = LINE('',#77757,#77758); +#77757 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77758 = VECTOR('',#77759,1.); +#77759 = DIRECTION('',(0.,1.,0.)); +#77760 = ORIENTED_EDGE('',*,*,#77761,.T.); +#77761 = EDGE_CURVE('',#77754,#77762,#77764,.T.); +#77762 = VERTEX_POINT('',#77763); +#77763 = CARTESIAN_POINT('',(2.3,1.4,1.5)); +#77764 = LINE('',#77765,#77766); +#77765 = CARTESIAN_POINT('',(2.15,1.4,1.5)); +#77766 = VECTOR('',#77767,1.); +#77767 = DIRECTION('',(1.,0.,0.)); +#77768 = ORIENTED_EDGE('',*,*,#77769,.T.); +#77769 = EDGE_CURVE('',#77762,#77770,#77772,.T.); +#77770 = VERTEX_POINT('',#77771); +#77771 = CARTESIAN_POINT('',(2.3,0.9,1.5)); +#77772 = LINE('',#77773,#77774); +#77773 = CARTESIAN_POINT('',(2.3,1.4,1.5)); +#77774 = VECTOR('',#77775,1.); +#77775 = DIRECTION('',(0.,-1.,0.)); +#77776 = ORIENTED_EDGE('',*,*,#77777,.T.); +#77777 = EDGE_CURVE('',#77770,#77778,#77780,.T.); +#77778 = VERTEX_POINT('',#77779); +#77779 = CARTESIAN_POINT('',(2.15,0.9,1.5)); +#77780 = LINE('',#77781,#77782); +#77781 = CARTESIAN_POINT('',(2.3,0.9,1.5)); +#77782 = VECTOR('',#77783,1.); +#77783 = DIRECTION('',(-1.,0.,0.)); +#77784 = ORIENTED_EDGE('',*,*,#77785,.F.); +#77785 = EDGE_CURVE('',#77786,#77778,#77788,.T.); +#77786 = VERTEX_POINT('',#77787); +#77787 = CARTESIAN_POINT('',(2.15,0.4,1.5)); +#77788 = LINE('',#77789,#77790); +#77789 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#77790 = VECTOR('',#77791,1.); +#77791 = DIRECTION('',(0.,1.,0.)); +#77792 = ORIENTED_EDGE('',*,*,#77793,.F.); +#77793 = EDGE_CURVE('',#77794,#77786,#77796,.T.); +#77794 = VERTEX_POINT('',#77795); +#77795 = CARTESIAN_POINT('',(2.2,0.4,1.5)); +#77796 = LINE('',#77797,#77798); +#77797 = CARTESIAN_POINT('',(2.35,0.4,1.5)); +#77798 = VECTOR('',#77799,1.); +#77799 = DIRECTION('',(-1.,0.,0.)); +#77800 = ORIENTED_EDGE('',*,*,#77801,.T.); +#77801 = EDGE_CURVE('',#77794,#76764,#77802,.T.); +#77802 = LINE('',#77803,#77804); +#77803 = CARTESIAN_POINT('',(1.1,0.4,1.5)); +#77804 = VECTOR('',#77805,1.); +#77805 = DIRECTION('',(1.,0.,0.)); +#77806 = PLANE('',#77807); +#77807 = AXIS2_PLACEMENT_3D('',#77808,#77809,#77810); +#77808 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,1.5 + )); +#77809 = DIRECTION('',(0.,0.,1.)); +#77810 = DIRECTION('',(1.,0.,-0.)); +#77811 = ADVANCED_FACE('',(#77812),#77837,.F.); +#77812 = FACE_BOUND('',#77813,.F.); +#77813 = EDGE_LOOP('',(#77814,#77815,#77822,#77823,#77830,#77831)); +#77814 = ORIENTED_EDGE('',*,*,#76763,.F.); +#77815 = ORIENTED_EDGE('',*,*,#77816,.T.); +#77816 = EDGE_CURVE('',#76756,#76740,#77817,.T.); +#77817 = CIRCLE('',#77818,5.E-02); +#77818 = AXIS2_PLACEMENT_3D('',#77819,#77820,#77821); +#77819 = CARTESIAN_POINT('',(2.35,0.35,1.)); +#77820 = DIRECTION('',(-1.,0.,0.)); +#77821 = DIRECTION('',(0.,0.,1.)); +#77822 = ORIENTED_EDGE('',*,*,#76739,.F.); +#77823 = ORIENTED_EDGE('',*,*,#77824,.F.); +#77824 = EDGE_CURVE('',#76716,#76732,#77825,.T.); +#77825 = CIRCLE('',#77826,5.E-02); +#77826 = AXIS2_PLACEMENT_3D('',#77827,#77828,#77829); +#77827 = CARTESIAN_POINT('',(2.35,-0.35,1.)); +#77828 = DIRECTION('',(1.,0.,-0.)); +#77829 = DIRECTION('',(0.,0.,1.)); +#77830 = ORIENTED_EDGE('',*,*,#76715,.F.); +#77831 = ORIENTED_EDGE('',*,*,#77832,.T.); +#77832 = EDGE_CURVE('',#76708,#76764,#77833,.T.); +#77833 = LINE('',#77834,#77835); +#77834 = CARTESIAN_POINT('',(2.35,-0.4,1.5)); +#77835 = VECTOR('',#77836,1.); +#77836 = DIRECTION('',(0.,1.,0.)); +#77837 = PLANE('',#77838); +#77838 = AXIS2_PLACEMENT_3D('',#77839,#77840,#77841); +#77839 = CARTESIAN_POINT('',(2.35,0.2,1.225)); +#77840 = DIRECTION('',(-1.,-0.,-0.)); +#77841 = DIRECTION('',(0.,0.,-1.)); +#77842 = ADVANCED_FACE('',(#77843),#77868,.T.); +#77843 = FACE_BOUND('',#77844,.T.); +#77844 = EDGE_LOOP('',(#77845,#77855,#77861,#77862)); +#77845 = ORIENTED_EDGE('',*,*,#77846,.F.); +#77846 = EDGE_CURVE('',#77847,#77849,#77851,.T.); +#77847 = VERTEX_POINT('',#77848); +#77848 = CARTESIAN_POINT('',(2.2,0.4,0.95)); +#77849 = VERTEX_POINT('',#77850); +#77850 = CARTESIAN_POINT('',(2.2,0.4,1.)); +#77851 = LINE('',#77852,#77853); +#77852 = CARTESIAN_POINT('',(2.2,0.4,0.95)); +#77853 = VECTOR('',#77854,1.); +#77854 = DIRECTION('',(0.,0.,1.)); +#77855 = ORIENTED_EDGE('',*,*,#77856,.T.); +#77856 = EDGE_CURVE('',#77847,#76748,#77857,.T.); +#77857 = LINE('',#77858,#77859); +#77858 = CARTESIAN_POINT('',(2.2,0.4,0.95)); +#77859 = VECTOR('',#77860,1.); +#77860 = DIRECTION('',(1.,0.,0.)); +#77861 = ORIENTED_EDGE('',*,*,#76755,.T.); +#77862 = ORIENTED_EDGE('',*,*,#77863,.F.); +#77863 = EDGE_CURVE('',#77849,#76756,#77864,.T.); +#77864 = LINE('',#77865,#77866); +#77865 = CARTESIAN_POINT('',(2.2,0.4,1.)); +#77866 = VECTOR('',#77867,1.); +#77867 = DIRECTION('',(1.,0.,0.)); +#77868 = PLANE('',#77869); +#77869 = AXIS2_PLACEMENT_3D('',#77870,#77871,#77872); +#77870 = CARTESIAN_POINT('',(2.2,0.4,0.95)); +#77871 = DIRECTION('',(0.,-1.,0.)); +#77872 = DIRECTION('',(0.,0.,1.)); +#77873 = ADVANCED_FACE('',(#77874),#77892,.T.); +#77874 = FACE_BOUND('',#77875,.T.); +#77875 = EDGE_LOOP('',(#77876,#77884,#77890,#77891)); +#77876 = ORIENTED_EDGE('',*,*,#77877,.F.); +#77877 = EDGE_CURVE('',#77878,#77847,#77880,.T.); +#77878 = VERTEX_POINT('',#77879); +#77879 = CARTESIAN_POINT('',(2.2,0.35,0.95)); +#77880 = LINE('',#77881,#77882); +#77881 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77882 = VECTOR('',#77883,1.); +#77883 = DIRECTION('',(0.,1.,0.)); +#77884 = ORIENTED_EDGE('',*,*,#77885,.T.); +#77885 = EDGE_CURVE('',#77878,#76740,#77886,.T.); +#77886 = LINE('',#77887,#77888); +#77887 = CARTESIAN_POINT('',(2.2,0.35,0.95)); +#77888 = VECTOR('',#77889,1.); +#77889 = DIRECTION('',(1.,0.,0.)); +#77890 = ORIENTED_EDGE('',*,*,#76747,.T.); +#77891 = ORIENTED_EDGE('',*,*,#77856,.F.); +#77892 = PLANE('',#77893); +#77893 = AXIS2_PLACEMENT_3D('',#77894,#77895,#77896); +#77894 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77895 = DIRECTION('',(0.,0.,1.)); +#77896 = DIRECTION('',(0.,1.,0.)); +#77897 = ADVANCED_FACE('',(#77898),#77923,.T.); +#77898 = FACE_BOUND('',#77899,.T.); +#77899 = EDGE_LOOP('',(#77900,#77910,#77916,#77917)); +#77900 = ORIENTED_EDGE('',*,*,#77901,.F.); +#77901 = EDGE_CURVE('',#77902,#77904,#77906,.T.); +#77902 = VERTEX_POINT('',#77903); +#77903 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77904 = VERTEX_POINT('',#77905); +#77905 = CARTESIAN_POINT('',(2.2,-0.35,0.95)); +#77906 = LINE('',#77907,#77908); +#77907 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77908 = VECTOR('',#77909,1.); +#77909 = DIRECTION('',(0.,1.,0.)); +#77910 = ORIENTED_EDGE('',*,*,#77911,.T.); +#77911 = EDGE_CURVE('',#77902,#76724,#77912,.T.); +#77912 = LINE('',#77913,#77914); +#77913 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77914 = VECTOR('',#77915,1.); +#77915 = DIRECTION('',(1.,0.,0.)); +#77916 = ORIENTED_EDGE('',*,*,#76731,.T.); +#77917 = ORIENTED_EDGE('',*,*,#77918,.F.); +#77918 = EDGE_CURVE('',#77904,#76732,#77919,.T.); +#77919 = LINE('',#77920,#77921); +#77920 = CARTESIAN_POINT('',(2.2,-0.35,0.95)); +#77921 = VECTOR('',#77922,1.); +#77922 = DIRECTION('',(1.,0.,0.)); +#77923 = PLANE('',#77924); +#77924 = AXIS2_PLACEMENT_3D('',#77925,#77926,#77927); +#77925 = CARTESIAN_POINT('',(2.2,-0.4,0.95)); +#77926 = DIRECTION('',(0.,0.,1.)); +#77927 = DIRECTION('',(0.,1.,0.)); +#77928 = ADVANCED_FACE('',(#77929),#77947,.T.); +#77929 = FACE_BOUND('',#77930,.T.); +#77930 = EDGE_LOOP('',(#77931,#77939,#77945,#77946)); +#77931 = ORIENTED_EDGE('',*,*,#77932,.F.); +#77932 = EDGE_CURVE('',#77933,#77902,#77935,.T.); +#77933 = VERTEX_POINT('',#77934); +#77934 = CARTESIAN_POINT('',(2.2,-0.4,1.)); +#77935 = LINE('',#77936,#77937); +#77936 = CARTESIAN_POINT('',(2.2,-0.4,1.65)); +#77937 = VECTOR('',#77938,1.); +#77938 = DIRECTION('',(0.,0.,-1.)); +#77939 = ORIENTED_EDGE('',*,*,#77940,.T.); +#77940 = EDGE_CURVE('',#77933,#76716,#77941,.T.); +#77941 = LINE('',#77942,#77943); +#77942 = CARTESIAN_POINT('',(2.2,-0.4,1.)); +#77943 = VECTOR('',#77944,1.); +#77944 = DIRECTION('',(1.,0.,0.)); +#77945 = ORIENTED_EDGE('',*,*,#76723,.T.); +#77946 = ORIENTED_EDGE('',*,*,#77911,.F.); +#77947 = PLANE('',#77948); +#77948 = AXIS2_PLACEMENT_3D('',#77949,#77950,#77951); +#77949 = CARTESIAN_POINT('',(2.2,-0.4,1.65)); +#77950 = DIRECTION('',(0.,1.,0.)); +#77951 = DIRECTION('',(0.,0.,-1.)); +#77952 = ADVANCED_FACE('',(#77953),#77966,.T.); +#77953 = FACE_BOUND('',#77954,.T.); +#77954 = EDGE_LOOP('',(#77955,#77961,#77962,#77963,#77964,#77965)); +#77955 = ORIENTED_EDGE('',*,*,#77956,.F.); +#77956 = EDGE_CURVE('',#77637,#77700,#77957,.T.); +#77957 = LINE('',#77958,#77959); +#77958 = CARTESIAN_POINT('',(2.40937330717,0.55,8.905996075495E-02)); +#77959 = VECTOR('',#77960,1.); +#77960 = DIRECTION('',(0.,1.,0.)); +#77961 = ORIENTED_EDGE('',*,*,#77644,.T.); +#77962 = ORIENTED_EDGE('',*,*,#76961,.T.); +#77963 = ORIENTED_EDGE('',*,*,#76943,.T.); +#77964 = ORIENTED_EDGE('',*,*,#76928,.F.); +#77965 = ORIENTED_EDGE('',*,*,#77707,.F.); +#77966 = CYLINDRICAL_SURFACE('',#77967,0.2); +#77967 = AXIS2_PLACEMENT_3D('',#77968,#77969,#77970); +#77968 = CARTESIAN_POINT('',(2.242963248302,0.85,0.2)); +#77969 = DIRECTION('',(0.,1.,0.)); +#77970 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77971 = ADVANCED_FACE('',(#77972),#77985,.T.); +#77972 = FACE_BOUND('',#77973,.T.); +#77973 = EDGE_LOOP('',(#77974,#77980,#77981,#77982,#77983,#77984)); +#77974 = ORIENTED_EDGE('',*,*,#77975,.F.); +#77975 = EDGE_CURVE('',#77538,#77601,#77976,.T.); +#77976 = LINE('',#77977,#77978); +#77977 = CARTESIAN_POINT('',(2.40937330717,-1.15,8.905996075495E-02)); +#77978 = VECTOR('',#77979,1.); +#77979 = DIRECTION('',(0.,1.,0.)); +#77980 = ORIENTED_EDGE('',*,*,#77545,.T.); +#77981 = ORIENTED_EDGE('',*,*,#77012,.T.); +#77982 = ORIENTED_EDGE('',*,*,#76994,.T.); +#77983 = ORIENTED_EDGE('',*,*,#76979,.F.); +#77984 = ORIENTED_EDGE('',*,*,#77608,.F.); +#77985 = CYLINDRICAL_SURFACE('',#77986,0.2); +#77986 = AXIS2_PLACEMENT_3D('',#77987,#77988,#77989); +#77987 = CARTESIAN_POINT('',(2.242963248302,-0.85,0.2)); +#77988 = DIRECTION('',(0.,1.,0.)); +#77989 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#77990 = ADVANCED_FACE('',(#77991),#78002,.F.); +#77991 = FACE_BOUND('',#77992,.F.); +#77992 = EDGE_LOOP('',(#77993,#77994,#78000,#78001)); +#77993 = ORIENTED_EDGE('',*,*,#77745,.F.); +#77994 = ORIENTED_EDGE('',*,*,#77995,.T.); +#77995 = EDGE_CURVE('',#77746,#77278,#77996,.T.); +#77996 = LINE('',#77997,#77998); +#77997 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#77998 = VECTOR('',#77999,1.); +#77999 = DIRECTION('',(0.,0.,1.)); +#78000 = ORIENTED_EDGE('',*,*,#77285,.T.); +#78001 = ORIENTED_EDGE('',*,*,#77120,.F.); +#78002 = PLANE('',#78003); +#78003 = AXIS2_PLACEMENT_3D('',#78004,#78005,#78006); +#78004 = CARTESIAN_POINT('',(2.15,1.55,1.5)); +#78005 = DIRECTION('',(0.,-1.,0.)); +#78006 = DIRECTION('',(-1.,0.,0.)); +#78007 = ADVANCED_FACE('',(#78008),#78019,.F.); +#78008 = FACE_BOUND('',#78009,.F.); +#78009 = EDGE_LOOP('',(#78010,#78011,#78012,#78013)); +#78010 = ORIENTED_EDGE('',*,*,#77509,.F.); +#78011 = ORIENTED_EDGE('',*,*,#77447,.T.); +#78012 = ORIENTED_EDGE('',*,*,#77181,.T.); +#78013 = ORIENTED_EDGE('',*,*,#78014,.F.); +#78014 = EDGE_CURVE('',#77502,#77182,#78015,.T.); +#78015 = LINE('',#78016,#78017); +#78016 = CARTESIAN_POINT('',(2.15,-1.4,1.5)); +#78017 = VECTOR('',#78018,1.); +#78018 = DIRECTION('',(0.,0.,1.)); +#78019 = PLANE('',#78020); +#78020 = AXIS2_PLACEMENT_3D('',#78021,#78022,#78023); +#78021 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#78022 = DIRECTION('',(-1.,0.,0.)); +#78023 = DIRECTION('',(0.,1.,0.)); +#78024 = ADVANCED_FACE('',(#78025),#78036,.T.); +#78025 = FACE_BOUND('',#78026,.T.); +#78026 = EDGE_LOOP('',(#78027,#78033,#78034,#78035)); +#78027 = ORIENTED_EDGE('',*,*,#78028,.T.); +#78028 = EDGE_CURVE('',#77494,#77190,#78029,.T.); +#78029 = LINE('',#78030,#78031); +#78030 = CARTESIAN_POINT('',(2.3,-1.4,1.5)); +#78031 = VECTOR('',#78032,1.); +#78032 = DIRECTION('',(0.,0.,1.)); +#78033 = ORIENTED_EDGE('',*,*,#77189,.T.); +#78034 = ORIENTED_EDGE('',*,*,#78014,.F.); +#78035 = ORIENTED_EDGE('',*,*,#77501,.F.); +#78036 = PLANE('',#78037); +#78037 = AXIS2_PLACEMENT_3D('',#78038,#78039,#78040); +#78038 = CARTESIAN_POINT('',(2.3,-1.4,1.5)); +#78039 = DIRECTION('',(0.,-1.,0.)); +#78040 = DIRECTION('',(-1.,0.,0.)); +#78041 = ADVANCED_FACE('',(#78042),#78053,.T.); +#78042 = FACE_BOUND('',#78043,.T.); +#78043 = EDGE_LOOP('',(#78044,#78050,#78051,#78052)); +#78044 = ORIENTED_EDGE('',*,*,#78045,.T.); +#78045 = EDGE_CURVE('',#77486,#77198,#78046,.T.); +#78046 = LINE('',#78047,#78048); +#78047 = CARTESIAN_POINT('',(2.3,-0.9,1.5)); +#78048 = VECTOR('',#78049,1.); +#78049 = DIRECTION('',(0.,0.,1.)); +#78050 = ORIENTED_EDGE('',*,*,#77197,.T.); +#78051 = ORIENTED_EDGE('',*,*,#78028,.F.); +#78052 = ORIENTED_EDGE('',*,*,#77493,.F.); +#78053 = PLANE('',#78054); +#78054 = AXIS2_PLACEMENT_3D('',#78055,#78056,#78057); +#78055 = CARTESIAN_POINT('',(2.3,-0.9,1.5)); +#78056 = DIRECTION('',(1.,0.,0.)); +#78057 = DIRECTION('',(0.,-1.,0.)); +#78058 = ADVANCED_FACE('',(#78059),#78070,.T.); +#78059 = FACE_BOUND('',#78060,.T.); +#78060 = EDGE_LOOP('',(#78061,#78067,#78068,#78069)); +#78061 = ORIENTED_EDGE('',*,*,#78062,.T.); +#78062 = EDGE_CURVE('',#77478,#77206,#78063,.T.); +#78063 = LINE('',#78064,#78065); +#78064 = CARTESIAN_POINT('',(2.15,-0.9,1.5)); +#78065 = VECTOR('',#78066,1.); +#78066 = DIRECTION('',(0.,0.,1.)); +#78067 = ORIENTED_EDGE('',*,*,#77205,.T.); +#78068 = ORIENTED_EDGE('',*,*,#78045,.F.); +#78069 = ORIENTED_EDGE('',*,*,#77485,.F.); +#78070 = PLANE('',#78071); +#78071 = AXIS2_PLACEMENT_3D('',#78072,#78073,#78074); +#78072 = CARTESIAN_POINT('',(2.15,-0.9,1.5)); +#78073 = DIRECTION('',(0.,1.,0.)); +#78074 = DIRECTION('',(1.,0.,0.)); +#78075 = ADVANCED_FACE('',(#78076),#78087,.F.); +#78076 = FACE_BOUND('',#78077,.F.); +#78077 = EDGE_LOOP('',(#78078,#78079,#78080,#78081)); +#78078 = ORIENTED_EDGE('',*,*,#77477,.F.); +#78079 = ORIENTED_EDGE('',*,*,#78062,.T.); +#78080 = ORIENTED_EDGE('',*,*,#77213,.T.); +#78081 = ORIENTED_EDGE('',*,*,#78082,.F.); +#78082 = EDGE_CURVE('',#77470,#77214,#78083,.T.); +#78083 = LINE('',#78084,#78085); +#78084 = CARTESIAN_POINT('',(2.15,-0.4,1.5)); +#78085 = VECTOR('',#78086,1.); +#78086 = DIRECTION('',(0.,0.,1.)); +#78087 = PLANE('',#78088); +#78088 = AXIS2_PLACEMENT_3D('',#78089,#78090,#78091); +#78089 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#78090 = DIRECTION('',(-1.,0.,0.)); +#78091 = DIRECTION('',(0.,1.,0.)); +#78092 = ADVANCED_FACE('',(#78093),#78106,.T.); +#78093 = FACE_BOUND('',#78094,.F.); +#78094 = EDGE_LOOP('',(#78095,#78096,#78097,#78098,#78099)); +#78095 = ORIENTED_EDGE('',*,*,#77461,.T.); +#78096 = ORIENTED_EDGE('',*,*,#77469,.T.); +#78097 = ORIENTED_EDGE('',*,*,#78082,.T.); +#78098 = ORIENTED_EDGE('',*,*,#77221,.T.); +#78099 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78100 = EDGE_CURVE('',#77222,#76708,#78101,.T.); +#78101 = CIRCLE('',#78102,0.15); +#78102 = AXIS2_PLACEMENT_3D('',#78103,#78104,#78105); +#78103 = CARTESIAN_POINT('',(2.2,-0.4,1.5)); +#78104 = DIRECTION('',(0.,1.,0.)); +#78105 = DIRECTION('',(0.,-0.,1.)); +#78106 = PLANE('',#78107); +#78107 = AXIS2_PLACEMENT_3D('',#78108,#78109,#78110); +#78108 = CARTESIAN_POINT('',(2.2,-0.4,1.5)); +#78109 = DIRECTION('',(-0.,-1.,-0.)); +#78110 = DIRECTION('',(0.,0.,1.)); +#78111 = ADVANCED_FACE('',(#78112),#78124,.T.); +#78112 = FACE_BOUND('',#78113,.T.); +#78113 = EDGE_LOOP('',(#78114,#78115,#78116,#78117)); +#78114 = ORIENTED_EDGE('',*,*,#77229,.F.); +#78115 = ORIENTED_EDGE('',*,*,#78100,.T.); +#78116 = ORIENTED_EDGE('',*,*,#77832,.T.); +#78117 = ORIENTED_EDGE('',*,*,#78118,.F.); +#78118 = EDGE_CURVE('',#77230,#76764,#78119,.T.); +#78119 = CIRCLE('',#78120,0.15); +#78120 = AXIS2_PLACEMENT_3D('',#78121,#78122,#78123); +#78121 = CARTESIAN_POINT('',(2.2,0.4,1.5)); +#78122 = DIRECTION('',(0.,1.,0.)); +#78123 = DIRECTION('',(0.,-0.,1.)); +#78124 = CYLINDRICAL_SURFACE('',#78125,0.15); +#78125 = AXIS2_PLACEMENT_3D('',#78126,#78127,#78128); +#78126 = CARTESIAN_POINT('',(2.2,0.2,1.5)); +#78127 = DIRECTION('',(0.,1.,0.)); +#78128 = DIRECTION('',(0.,-0.,1.)); +#78129 = ADVANCED_FACE('',(#78130),#78142,.T.); +#78130 = FACE_BOUND('',#78131,.T.); +#78131 = EDGE_LOOP('',(#78132,#78133,#78134,#78140,#78141)); +#78132 = ORIENTED_EDGE('',*,*,#77801,.F.); +#78133 = ORIENTED_EDGE('',*,*,#77793,.T.); +#78134 = ORIENTED_EDGE('',*,*,#78135,.T.); +#78135 = EDGE_CURVE('',#77786,#77238,#78136,.T.); +#78136 = LINE('',#78137,#78138); +#78137 = CARTESIAN_POINT('',(2.15,0.4,1.5)); +#78138 = VECTOR('',#78139,1.); +#78139 = DIRECTION('',(0.,0.,1.)); +#78140 = ORIENTED_EDGE('',*,*,#77237,.T.); +#78141 = ORIENTED_EDGE('',*,*,#78118,.T.); +#78142 = PLANE('',#78143); +#78143 = AXIS2_PLACEMENT_3D('',#78144,#78145,#78146); +#78144 = CARTESIAN_POINT('',(2.2,0.4,1.5)); +#78145 = DIRECTION('',(0.,1.,0.)); +#78146 = DIRECTION('',(0.,0.,-1.)); +#78147 = ADVANCED_FACE('',(#78148),#78159,.F.); +#78148 = FACE_BOUND('',#78149,.F.); +#78149 = EDGE_LOOP('',(#78150,#78151,#78152,#78153)); +#78150 = ORIENTED_EDGE('',*,*,#77785,.F.); +#78151 = ORIENTED_EDGE('',*,*,#78135,.T.); +#78152 = ORIENTED_EDGE('',*,*,#77245,.T.); +#78153 = ORIENTED_EDGE('',*,*,#78154,.F.); +#78154 = EDGE_CURVE('',#77778,#77246,#78155,.T.); +#78155 = LINE('',#78156,#78157); +#78156 = CARTESIAN_POINT('',(2.15,0.9,1.5)); +#78157 = VECTOR('',#78158,1.); +#78158 = DIRECTION('',(0.,0.,1.)); +#78159 = PLANE('',#78160); +#78160 = AXIS2_PLACEMENT_3D('',#78161,#78162,#78163); +#78161 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#78162 = DIRECTION('',(-1.,0.,0.)); +#78163 = DIRECTION('',(0.,1.,0.)); +#78164 = ADVANCED_FACE('',(#78165),#78176,.T.); +#78165 = FACE_BOUND('',#78166,.T.); +#78166 = EDGE_LOOP('',(#78167,#78173,#78174,#78175)); +#78167 = ORIENTED_EDGE('',*,*,#78168,.T.); +#78168 = EDGE_CURVE('',#77770,#77254,#78169,.T.); +#78169 = LINE('',#78170,#78171); +#78170 = CARTESIAN_POINT('',(2.3,0.9,1.5)); +#78171 = VECTOR('',#78172,1.); +#78172 = DIRECTION('',(0.,0.,1.)); +#78173 = ORIENTED_EDGE('',*,*,#77253,.T.); +#78174 = ORIENTED_EDGE('',*,*,#78154,.F.); +#78175 = ORIENTED_EDGE('',*,*,#77777,.F.); +#78176 = PLANE('',#78177); +#78177 = AXIS2_PLACEMENT_3D('',#78178,#78179,#78180); +#78178 = CARTESIAN_POINT('',(2.3,0.9,1.5)); +#78179 = DIRECTION('',(0.,-1.,0.)); +#78180 = DIRECTION('',(-1.,0.,0.)); +#78181 = ADVANCED_FACE('',(#78182),#78193,.T.); +#78182 = FACE_BOUND('',#78183,.T.); +#78183 = EDGE_LOOP('',(#78184,#78190,#78191,#78192)); +#78184 = ORIENTED_EDGE('',*,*,#78185,.T.); +#78185 = EDGE_CURVE('',#77762,#77262,#78186,.T.); +#78186 = LINE('',#78187,#78188); +#78187 = CARTESIAN_POINT('',(2.3,1.4,1.5)); +#78188 = VECTOR('',#78189,1.); +#78189 = DIRECTION('',(0.,0.,1.)); +#78190 = ORIENTED_EDGE('',*,*,#77261,.T.); +#78191 = ORIENTED_EDGE('',*,*,#78168,.F.); +#78192 = ORIENTED_EDGE('',*,*,#77769,.F.); +#78193 = PLANE('',#78194); +#78194 = AXIS2_PLACEMENT_3D('',#78195,#78196,#78197); +#78195 = CARTESIAN_POINT('',(2.3,1.4,1.5)); +#78196 = DIRECTION('',(1.,0.,0.)); +#78197 = DIRECTION('',(0.,-1.,0.)); +#78198 = ADVANCED_FACE('',(#78199),#78210,.T.); +#78199 = FACE_BOUND('',#78200,.T.); +#78200 = EDGE_LOOP('',(#78201,#78207,#78208,#78209)); +#78201 = ORIENTED_EDGE('',*,*,#78202,.T.); +#78202 = EDGE_CURVE('',#77754,#77270,#78203,.T.); +#78203 = LINE('',#78204,#78205); +#78204 = CARTESIAN_POINT('',(2.15,1.4,1.5)); +#78205 = VECTOR('',#78206,1.); +#78206 = DIRECTION('',(0.,0.,1.)); +#78207 = ORIENTED_EDGE('',*,*,#77269,.T.); +#78208 = ORIENTED_EDGE('',*,*,#78185,.F.); +#78209 = ORIENTED_EDGE('',*,*,#77761,.F.); +#78210 = PLANE('',#78211); +#78211 = AXIS2_PLACEMENT_3D('',#78212,#78213,#78214); +#78212 = CARTESIAN_POINT('',(2.15,1.4,1.5)); +#78213 = DIRECTION('',(0.,1.,0.)); +#78214 = DIRECTION('',(1.,0.,0.)); +#78215 = ADVANCED_FACE('',(#78216),#78222,.F.); +#78216 = FACE_BOUND('',#78217,.F.); +#78217 = EDGE_LOOP('',(#78218,#78219,#78220,#78221)); +#78218 = ORIENTED_EDGE('',*,*,#77753,.F.); +#78219 = ORIENTED_EDGE('',*,*,#78202,.T.); +#78220 = ORIENTED_EDGE('',*,*,#77277,.T.); +#78221 = ORIENTED_EDGE('',*,*,#77995,.F.); +#78222 = PLANE('',#78223); +#78223 = AXIS2_PLACEMENT_3D('',#78224,#78225,#78226); +#78224 = CARTESIAN_POINT('',(2.15,-1.55,1.5)); +#78225 = DIRECTION('',(-1.,0.,0.)); +#78226 = DIRECTION('',(0.,1.,0.)); +#78227 = ADVANCED_FACE('',(#78228),#78254,.F.); +#78228 = FACE_BOUND('',#78229,.F.); +#78229 = EDGE_LOOP('',(#78230,#78238,#78247,#78253)); +#78230 = ORIENTED_EDGE('',*,*,#78231,.T.); +#78231 = EDGE_CURVE('',#77313,#78232,#78234,.T.); +#78232 = VERTEX_POINT('',#78233); +#78233 = CARTESIAN_POINT('',(-0.632455532034,-0.9,1.5)); +#78234 = LINE('',#78235,#78236); +#78235 = CARTESIAN_POINT('',(-0.632455532034,-0.9,1.5)); +#78236 = VECTOR('',#78237,1.); +#78237 = DIRECTION('',(-0.,-0.,-1.)); +#78238 = ORIENTED_EDGE('',*,*,#78239,.T.); +#78239 = EDGE_CURVE('',#78232,#78240,#78242,.T.); +#78240 = VERTEX_POINT('',#78241); +#78241 = CARTESIAN_POINT('',(0.632455532034,-0.9,1.5)); +#78242 = CIRCLE('',#78243,1.1); +#78243 = AXIS2_PLACEMENT_3D('',#78244,#78245,#78246); +#78244 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78245 = DIRECTION('',(0.,0.,1.)); +#78246 = DIRECTION('',(1.,0.,-0.)); +#78247 = ORIENTED_EDGE('',*,*,#78248,.F.); +#78248 = EDGE_CURVE('',#77311,#78240,#78249,.T.); +#78249 = LINE('',#78250,#78251); +#78250 = CARTESIAN_POINT('',(0.632455532034,-0.9,1.5)); +#78251 = VECTOR('',#78252,1.); +#78252 = DIRECTION('',(-0.,-0.,-1.)); +#78253 = ORIENTED_EDGE('',*,*,#77310,.T.); +#78254 = CYLINDRICAL_SURFACE('',#78255,1.1); +#78255 = AXIS2_PLACEMENT_3D('',#78256,#78257,#78258); +#78256 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78257 = DIRECTION('',(-0.,-0.,-1.)); +#78258 = DIRECTION('',(1.,0.,0.)); +#78259 = ADVANCED_FACE('',(#78260),#78278,.T.); +#78260 = FACE_BOUND('',#78261,.T.); +#78261 = EDGE_LOOP('',(#78262,#78270,#78276,#78277)); +#78262 = ORIENTED_EDGE('',*,*,#78263,.F.); +#78263 = EDGE_CURVE('',#78264,#78232,#78266,.T.); +#78264 = VERTEX_POINT('',#78265); +#78265 = CARTESIAN_POINT('',(-1.3,-0.9,1.5)); +#78266 = LINE('',#78267,#78268); +#78267 = CARTESIAN_POINT('',(-1.4,-0.9,1.5)); +#78268 = VECTOR('',#78269,1.); +#78269 = DIRECTION('',(1.,0.,0.)); +#78270 = ORIENTED_EDGE('',*,*,#78271,.T.); +#78271 = EDGE_CURVE('',#78264,#77322,#78272,.T.); +#78272 = LINE('',#78273,#78274); +#78273 = CARTESIAN_POINT('',(-1.3,-0.9,1.5)); +#78274 = VECTOR('',#78275,1.); +#78275 = DIRECTION('',(0.,0.,1.)); +#78276 = ORIENTED_EDGE('',*,*,#77321,.F.); +#78277 = ORIENTED_EDGE('',*,*,#78231,.T.); +#78278 = PLANE('',#78279); +#78279 = AXIS2_PLACEMENT_3D('',#78280,#78281,#78282); +#78280 = CARTESIAN_POINT('',(-1.4,-0.9,1.5)); +#78281 = DIRECTION('',(0.,1.,0.)); +#78282 = DIRECTION('',(1.,0.,0.)); +#78283 = ADVANCED_FACE('',(#78284),#78303,.F.); +#78284 = FACE_BOUND('',#78285,.F.); +#78285 = EDGE_LOOP('',(#78286,#78287,#78295,#78302)); +#78286 = ORIENTED_EDGE('',*,*,#77329,.F.); +#78287 = ORIENTED_EDGE('',*,*,#78288,.F.); +#78288 = EDGE_CURVE('',#78289,#77330,#78291,.T.); +#78289 = VERTEX_POINT('',#78290); +#78290 = CARTESIAN_POINT('',(-1.4,-0.8,1.5)); +#78291 = LINE('',#78292,#78293); +#78292 = CARTESIAN_POINT('',(-1.4,-0.8,1.5)); +#78293 = VECTOR('',#78294,1.); +#78294 = DIRECTION('',(0.,0.,1.)); +#78295 = ORIENTED_EDGE('',*,*,#78296,.F.); +#78296 = EDGE_CURVE('',#78264,#78289,#78297,.T.); +#78297 = CIRCLE('',#78298,0.1); +#78298 = AXIS2_PLACEMENT_3D('',#78299,#78300,#78301); +#78299 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78300 = DIRECTION('',(-0.,-0.,-1.)); +#78301 = DIRECTION('',(0.,-1.,0.)); +#78302 = ORIENTED_EDGE('',*,*,#78271,.T.); +#78303 = CYLINDRICAL_SURFACE('',#78304,0.1); +#78304 = AXIS2_PLACEMENT_3D('',#78305,#78306,#78307); +#78305 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78306 = DIRECTION('',(0.,0.,1.)); +#78307 = DIRECTION('',(0.,-1.,0.)); +#78308 = ADVANCED_FACE('',(#78309),#78327,.T.); +#78309 = FACE_BOUND('',#78310,.T.); +#78310 = EDGE_LOOP('',(#78311,#78319,#78325,#78326)); +#78311 = ORIENTED_EDGE('',*,*,#78312,.F.); +#78312 = EDGE_CURVE('',#78313,#78289,#78315,.T.); +#78313 = VERTEX_POINT('',#78314); +#78314 = CARTESIAN_POINT('',(-1.4,0.8,1.5)); +#78315 = LINE('',#78316,#78317); +#78316 = CARTESIAN_POINT('',(-1.4,0.9,1.5)); +#78317 = VECTOR('',#78318,1.); +#78318 = DIRECTION('',(0.,-1.,0.)); +#78319 = ORIENTED_EDGE('',*,*,#78320,.T.); +#78320 = EDGE_CURVE('',#78313,#77339,#78321,.T.); +#78321 = LINE('',#78322,#78323); +#78322 = CARTESIAN_POINT('',(-1.4,0.8,1.5)); +#78323 = VECTOR('',#78324,1.); +#78324 = DIRECTION('',(0.,0.,1.)); +#78325 = ORIENTED_EDGE('',*,*,#77338,.F.); +#78326 = ORIENTED_EDGE('',*,*,#78288,.F.); +#78327 = PLANE('',#78328); +#78328 = AXIS2_PLACEMENT_3D('',#78329,#78330,#78331); +#78329 = CARTESIAN_POINT('',(-1.4,0.9,1.5)); +#78330 = DIRECTION('',(1.,0.,0.)); +#78331 = DIRECTION('',(0.,-1.,0.)); +#78332 = ADVANCED_FACE('',(#78333),#78352,.F.); +#78333 = FACE_BOUND('',#78334,.F.); +#78334 = EDGE_LOOP('',(#78335,#78343,#78350,#78351)); +#78335 = ORIENTED_EDGE('',*,*,#78336,.F.); +#78336 = EDGE_CURVE('',#78337,#77347,#78339,.T.); +#78337 = VERTEX_POINT('',#78338); +#78338 = CARTESIAN_POINT('',(-1.3,0.9,1.5)); +#78339 = LINE('',#78340,#78341); +#78340 = CARTESIAN_POINT('',(-1.3,0.9,1.5)); +#78341 = VECTOR('',#78342,1.); +#78342 = DIRECTION('',(0.,0.,1.)); +#78343 = ORIENTED_EDGE('',*,*,#78344,.T.); +#78344 = EDGE_CURVE('',#78337,#78313,#78345,.T.); +#78345 = CIRCLE('',#78346,0.1); +#78346 = AXIS2_PLACEMENT_3D('',#78347,#78348,#78349); +#78347 = CARTESIAN_POINT('',(-1.3,0.8,1.5)); +#78348 = DIRECTION('',(-0.,0.,1.)); +#78349 = DIRECTION('',(0.,-1.,0.)); +#78350 = ORIENTED_EDGE('',*,*,#78320,.T.); +#78351 = ORIENTED_EDGE('',*,*,#77346,.F.); +#78352 = CYLINDRICAL_SURFACE('',#78353,0.1); +#78353 = AXIS2_PLACEMENT_3D('',#78354,#78355,#78356); +#78354 = CARTESIAN_POINT('',(-1.3,0.8,1.5)); +#78355 = DIRECTION('',(0.,0.,1.)); +#78356 = DIRECTION('',(0.,1.,0.)); +#78357 = ADVANCED_FACE('',(#78358),#78376,.T.); +#78358 = FACE_BOUND('',#78359,.T.); +#78359 = EDGE_LOOP('',(#78360,#78368,#78374,#78375)); +#78360 = ORIENTED_EDGE('',*,*,#78361,.F.); +#78361 = EDGE_CURVE('',#78362,#78337,#78364,.T.); +#78362 = VERTEX_POINT('',#78363); +#78363 = CARTESIAN_POINT('',(-0.632455532034,0.9,1.5)); +#78364 = LINE('',#78365,#78366); +#78365 = CARTESIAN_POINT('',(1.4,0.9,1.5)); +#78366 = VECTOR('',#78367,1.); +#78367 = DIRECTION('',(-1.,0.,0.)); +#78368 = ORIENTED_EDGE('',*,*,#78369,.F.); +#78369 = EDGE_CURVE('',#77356,#78362,#78370,.T.); +#78370 = LINE('',#78371,#78372); +#78371 = CARTESIAN_POINT('',(-0.632455532034,0.9,1.5)); +#78372 = VECTOR('',#78373,1.); +#78373 = DIRECTION('',(-0.,-0.,-1.)); +#78374 = ORIENTED_EDGE('',*,*,#77355,.F.); +#78375 = ORIENTED_EDGE('',*,*,#78336,.F.); +#78376 = PLANE('',#78377); +#78377 = AXIS2_PLACEMENT_3D('',#78378,#78379,#78380); +#78378 = CARTESIAN_POINT('',(1.4,0.9,1.5)); +#78379 = DIRECTION('',(0.,-1.,0.)); +#78380 = DIRECTION('',(-1.,0.,0.)); +#78381 = ADVANCED_FACE('',(#78382),#78401,.F.); +#78382 = FACE_BOUND('',#78383,.F.); +#78383 = EDGE_LOOP('',(#78384,#78385,#78386,#78394)); +#78384 = ORIENTED_EDGE('',*,*,#78369,.F.); +#78385 = ORIENTED_EDGE('',*,*,#77363,.T.); +#78386 = ORIENTED_EDGE('',*,*,#78387,.T.); +#78387 = EDGE_CURVE('',#77364,#78388,#78390,.T.); +#78388 = VERTEX_POINT('',#78389); +#78389 = CARTESIAN_POINT('',(0.632455532034,0.9,1.5)); +#78390 = LINE('',#78391,#78392); +#78391 = CARTESIAN_POINT('',(0.632455532034,0.9,1.5)); +#78392 = VECTOR('',#78393,1.); +#78393 = DIRECTION('',(-0.,-0.,-1.)); +#78394 = ORIENTED_EDGE('',*,*,#78395,.T.); +#78395 = EDGE_CURVE('',#78388,#78362,#78396,.T.); +#78396 = CIRCLE('',#78397,1.1); +#78397 = AXIS2_PLACEMENT_3D('',#78398,#78399,#78400); +#78398 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78399 = DIRECTION('',(0.,0.,1.)); +#78400 = DIRECTION('',(1.,0.,-0.)); +#78401 = CYLINDRICAL_SURFACE('',#78402,1.1); +#78402 = AXIS2_PLACEMENT_3D('',#78403,#78404,#78405); +#78403 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78404 = DIRECTION('',(-0.,-0.,-1.)); +#78405 = DIRECTION('',(1.,0.,0.)); +#78406 = ADVANCED_FACE('',(#78407),#78425,.T.); +#78407 = FACE_BOUND('',#78408,.T.); +#78408 = EDGE_LOOP('',(#78409,#78417,#78423,#78424)); +#78409 = ORIENTED_EDGE('',*,*,#78410,.F.); +#78410 = EDGE_CURVE('',#78411,#78388,#78413,.T.); +#78411 = VERTEX_POINT('',#78412); +#78412 = CARTESIAN_POINT('',(1.3,0.9,1.5)); +#78413 = LINE('',#78414,#78415); +#78414 = CARTESIAN_POINT('',(1.4,0.9,1.5)); +#78415 = VECTOR('',#78416,1.); +#78416 = DIRECTION('',(-1.,0.,0.)); +#78417 = ORIENTED_EDGE('',*,*,#78418,.T.); +#78418 = EDGE_CURVE('',#78411,#77373,#78419,.T.); +#78419 = LINE('',#78420,#78421); +#78420 = CARTESIAN_POINT('',(1.3,0.9,1.5)); +#78421 = VECTOR('',#78422,1.); +#78422 = DIRECTION('',(0.,0.,1.)); +#78423 = ORIENTED_EDGE('',*,*,#77372,.F.); +#78424 = ORIENTED_EDGE('',*,*,#78387,.T.); +#78425 = PLANE('',#78426); +#78426 = AXIS2_PLACEMENT_3D('',#78427,#78428,#78429); +#78427 = CARTESIAN_POINT('',(1.4,0.9,1.5)); +#78428 = DIRECTION('',(0.,-1.,0.)); +#78429 = DIRECTION('',(-1.,0.,0.)); +#78430 = ADVANCED_FACE('',(#78431),#78450,.F.); +#78431 = FACE_BOUND('',#78432,.F.); +#78432 = EDGE_LOOP('',(#78433,#78441,#78448,#78449)); +#78433 = ORIENTED_EDGE('',*,*,#78434,.F.); +#78434 = EDGE_CURVE('',#78435,#77381,#78437,.T.); +#78435 = VERTEX_POINT('',#78436); +#78436 = CARTESIAN_POINT('',(1.4,0.8,1.5)); +#78437 = LINE('',#78438,#78439); +#78438 = CARTESIAN_POINT('',(1.4,0.8,1.5)); +#78439 = VECTOR('',#78440,1.); +#78440 = DIRECTION('',(0.,0.,1.)); +#78441 = ORIENTED_EDGE('',*,*,#78442,.T.); +#78442 = EDGE_CURVE('',#78435,#78411,#78443,.T.); +#78443 = CIRCLE('',#78444,0.1); +#78444 = AXIS2_PLACEMENT_3D('',#78445,#78446,#78447); +#78445 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78446 = DIRECTION('',(-0.,0.,1.)); +#78447 = DIRECTION('',(0.,-1.,0.)); +#78448 = ORIENTED_EDGE('',*,*,#78418,.T.); +#78449 = ORIENTED_EDGE('',*,*,#77380,.F.); +#78450 = CYLINDRICAL_SURFACE('',#78451,0.1); +#78451 = AXIS2_PLACEMENT_3D('',#78452,#78453,#78454); +#78452 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78453 = DIRECTION('',(0.,0.,1.)); +#78454 = DIRECTION('',(1.,0.,-0.)); +#78455 = ADVANCED_FACE('',(#78456),#78474,.T.); +#78456 = FACE_BOUND('',#78457,.T.); +#78457 = EDGE_LOOP('',(#78458,#78466,#78472,#78473)); +#78458 = ORIENTED_EDGE('',*,*,#78459,.F.); +#78459 = EDGE_CURVE('',#78460,#78435,#78462,.T.); +#78460 = VERTEX_POINT('',#78461); +#78461 = CARTESIAN_POINT('',(1.4,-0.8,1.5)); +#78462 = LINE('',#78463,#78464); +#78463 = CARTESIAN_POINT('',(1.4,-0.9,1.5)); +#78464 = VECTOR('',#78465,1.); +#78465 = DIRECTION('',(0.,1.,0.)); +#78466 = ORIENTED_EDGE('',*,*,#78467,.T.); +#78467 = EDGE_CURVE('',#78460,#77390,#78468,.T.); +#78468 = LINE('',#78469,#78470); +#78469 = CARTESIAN_POINT('',(1.4,-0.8,1.5)); +#78470 = VECTOR('',#78471,1.); +#78471 = DIRECTION('',(0.,0.,1.)); +#78472 = ORIENTED_EDGE('',*,*,#77389,.F.); +#78473 = ORIENTED_EDGE('',*,*,#78434,.F.); +#78474 = PLANE('',#78475); +#78475 = AXIS2_PLACEMENT_3D('',#78476,#78477,#78478); +#78476 = CARTESIAN_POINT('',(1.4,-0.9,1.5)); +#78477 = DIRECTION('',(-1.,0.,0.)); +#78478 = DIRECTION('',(0.,1.,0.)); +#78479 = ADVANCED_FACE('',(#78480),#78499,.F.); +#78480 = FACE_BOUND('',#78481,.F.); +#78481 = EDGE_LOOP('',(#78482,#78490,#78497,#78498)); +#78482 = ORIENTED_EDGE('',*,*,#78483,.F.); +#78483 = EDGE_CURVE('',#78484,#77398,#78486,.T.); +#78484 = VERTEX_POINT('',#78485); +#78485 = CARTESIAN_POINT('',(1.3,-0.9,1.5)); +#78486 = LINE('',#78487,#78488); +#78487 = CARTESIAN_POINT('',(1.3,-0.9,1.5)); +#78488 = VECTOR('',#78489,1.); +#78489 = DIRECTION('',(0.,0.,1.)); +#78490 = ORIENTED_EDGE('',*,*,#78491,.T.); +#78491 = EDGE_CURVE('',#78484,#78460,#78492,.T.); +#78492 = CIRCLE('',#78493,0.1); +#78493 = AXIS2_PLACEMENT_3D('',#78494,#78495,#78496); +#78494 = CARTESIAN_POINT('',(1.3,-0.8,1.5)); +#78495 = DIRECTION('',(-0.,0.,1.)); +#78496 = DIRECTION('',(0.,-1.,0.)); +#78497 = ORIENTED_EDGE('',*,*,#78467,.T.); +#78498 = ORIENTED_EDGE('',*,*,#77397,.F.); +#78499 = CYLINDRICAL_SURFACE('',#78500,0.1); +#78500 = AXIS2_PLACEMENT_3D('',#78501,#78502,#78503); +#78501 = CARTESIAN_POINT('',(1.3,-0.8,1.5)); +#78502 = DIRECTION('',(0.,0.,1.)); +#78503 = DIRECTION('',(0.,-1.,0.)); +#78504 = ADVANCED_FACE('',(#78505),#78516,.T.); +#78505 = FACE_BOUND('',#78506,.T.); +#78506 = EDGE_LOOP('',(#78507,#78513,#78514,#78515)); +#78507 = ORIENTED_EDGE('',*,*,#78508,.F.); +#78508 = EDGE_CURVE('',#78240,#78484,#78509,.T.); +#78509 = LINE('',#78510,#78511); +#78510 = CARTESIAN_POINT('',(-1.4,-0.9,1.5)); +#78511 = VECTOR('',#78512,1.); +#78512 = DIRECTION('',(1.,0.,0.)); +#78513 = ORIENTED_EDGE('',*,*,#78248,.F.); +#78514 = ORIENTED_EDGE('',*,*,#77406,.F.); +#78515 = ORIENTED_EDGE('',*,*,#78483,.F.); +#78516 = PLANE('',#78517); +#78517 = AXIS2_PLACEMENT_3D('',#78518,#78519,#78520); +#78518 = CARTESIAN_POINT('',(-1.4,-0.9,1.5)); +#78519 = DIRECTION('',(0.,1.,0.)); +#78520 = DIRECTION('',(1.,0.,0.)); +#78521 = ADVANCED_FACE('',(#78522),#78533,.T.); +#78522 = FACE_BOUND('',#78523,.T.); +#78523 = EDGE_LOOP('',(#78524,#78525,#78531,#78532)); +#78524 = ORIENTED_EDGE('',*,*,#77527,.T.); +#78525 = ORIENTED_EDGE('',*,*,#78526,.F.); +#78526 = EDGE_CURVE('',#77593,#77530,#78527,.T.); +#78527 = LINE('',#78528,#78529); +#78528 = CARTESIAN_POINT('',(2.75,-0.55,0.6)); +#78529 = VECTOR('',#78530,1.); +#78530 = DIRECTION('',(0.,-1.,0.)); +#78531 = ORIENTED_EDGE('',*,*,#77592,.F.); +#78532 = ORIENTED_EDGE('',*,*,#77570,.T.); +#78533 = PLANE('',#78534); +#78534 = AXIS2_PLACEMENT_3D('',#78535,#78536,#78537); +#78535 = CARTESIAN_POINT('',(2.583589941132,-0.85,0.710940039245)); +#78536 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#78537 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#78538 = ADVANCED_FACE('',(#78539),#78545,.T.); +#78539 = FACE_BOUND('',#78540,.T.); +#78540 = EDGE_LOOP('',(#78541,#78542,#78543,#78544)); +#78541 = ORIENTED_EDGE('',*,*,#77537,.T.); +#78542 = ORIENTED_EDGE('',*,*,#77975,.T.); +#78543 = ORIENTED_EDGE('',*,*,#77600,.F.); +#78544 = ORIENTED_EDGE('',*,*,#78526,.T.); +#78545 = PLANE('',#78546); +#78546 = AXIS2_PLACEMENT_3D('',#78547,#78548,#78549); +#78547 = CARTESIAN_POINT('',(2.75,-0.85,0.6)); +#78548 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#78549 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#78550 = ADVANCED_FACE('',(#78551),#78562,.T.); +#78551 = FACE_BOUND('',#78552,.T.); +#78552 = EDGE_LOOP('',(#78553,#78554,#78560,#78561)); +#78553 = ORIENTED_EDGE('',*,*,#77626,.T.); +#78554 = ORIENTED_EDGE('',*,*,#78555,.F.); +#78555 = EDGE_CURVE('',#77692,#77629,#78556,.T.); +#78556 = LINE('',#78557,#78558); +#78557 = CARTESIAN_POINT('',(2.75,1.15,0.6)); +#78558 = VECTOR('',#78559,1.); +#78559 = DIRECTION('',(0.,-1.,0.)); +#78560 = ORIENTED_EDGE('',*,*,#77691,.F.); +#78561 = ORIENTED_EDGE('',*,*,#77669,.T.); +#78562 = PLANE('',#78563); +#78563 = AXIS2_PLACEMENT_3D('',#78564,#78565,#78566); +#78564 = CARTESIAN_POINT('',(2.583589941132,0.85,0.710940039245)); +#78565 = DIRECTION('',(0.554700196225,0.,0.832050294338)); +#78566 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#78567 = ADVANCED_FACE('',(#78568),#78574,.T.); +#78568 = FACE_BOUND('',#78569,.T.); +#78569 = EDGE_LOOP('',(#78570,#78571,#78572,#78573)); +#78570 = ORIENTED_EDGE('',*,*,#77636,.T.); +#78571 = ORIENTED_EDGE('',*,*,#77956,.T.); +#78572 = ORIENTED_EDGE('',*,*,#77699,.F.); +#78573 = ORIENTED_EDGE('',*,*,#78555,.T.); +#78574 = PLANE('',#78575); +#78575 = AXIS2_PLACEMENT_3D('',#78576,#78577,#78578); +#78576 = CARTESIAN_POINT('',(2.75,0.85,0.6)); +#78577 = DIRECTION('',(0.832050294338,0.,-0.554700196225)); +#78578 = DIRECTION('',(-0.554700196225,0.,-0.832050294338)); +#78579 = ADVANCED_FACE('',(#78580),#78592,.T.); +#78580 = FACE_BOUND('',#78581,.T.); +#78581 = EDGE_LOOP('',(#78582,#78583,#78584,#78585)); +#78582 = ORIENTED_EDGE('',*,*,#77863,.T.); +#78583 = ORIENTED_EDGE('',*,*,#77816,.T.); +#78584 = ORIENTED_EDGE('',*,*,#77885,.F.); +#78585 = ORIENTED_EDGE('',*,*,#78586,.F.); +#78586 = EDGE_CURVE('',#77849,#77878,#78587,.T.); +#78587 = CIRCLE('',#78588,5.E-02); +#78588 = AXIS2_PLACEMENT_3D('',#78589,#78590,#78591); +#78589 = CARTESIAN_POINT('',(2.2,0.35,1.)); +#78590 = DIRECTION('',(-1.,0.,0.)); +#78591 = DIRECTION('',(0.,0.,1.)); +#78592 = CYLINDRICAL_SURFACE('',#78593,5.E-02); +#78593 = AXIS2_PLACEMENT_3D('',#78594,#78595,#78596); +#78594 = CARTESIAN_POINT('',(2.2,0.35,1.)); +#78595 = DIRECTION('',(1.,0.,0.)); +#78596 = DIRECTION('',(-0.,1.,0.)); +#78597 = ADVANCED_FACE('',(#78598),#78610,.T.); +#78598 = FACE_BOUND('',#78599,.T.); +#78599 = EDGE_LOOP('',(#78600,#78607,#78608,#78609)); +#78600 = ORIENTED_EDGE('',*,*,#78601,.T.); +#78601 = EDGE_CURVE('',#77933,#77904,#78602,.T.); +#78602 = CIRCLE('',#78603,5.E-02); +#78603 = AXIS2_PLACEMENT_3D('',#78604,#78605,#78606); +#78604 = CARTESIAN_POINT('',(2.2,-0.35,1.)); +#78605 = DIRECTION('',(1.,0.,-0.)); +#78606 = DIRECTION('',(0.,0.,1.)); +#78607 = ORIENTED_EDGE('',*,*,#77918,.T.); +#78608 = ORIENTED_EDGE('',*,*,#77824,.F.); +#78609 = ORIENTED_EDGE('',*,*,#77940,.F.); +#78610 = CYLINDRICAL_SURFACE('',#78611,5.E-02); +#78611 = AXIS2_PLACEMENT_3D('',#78612,#78613,#78614); +#78612 = CARTESIAN_POINT('',(2.2,-0.35,1.)); +#78613 = DIRECTION('',(1.,0.,0.)); +#78614 = DIRECTION('',(0.,-1.,0.)); +#78615 = ADVANCED_FACE('',(#78616),#78621,.T.); +#78616 = FACE_BOUND('',#78617,.T.); +#78617 = EDGE_LOOP('',(#78618,#78619,#78620)); +#78618 = ORIENTED_EDGE('',*,*,#77846,.T.); +#78619 = ORIENTED_EDGE('',*,*,#78586,.T.); +#78620 = ORIENTED_EDGE('',*,*,#77877,.T.); +#78621 = PLANE('',#78622); +#78622 = AXIS2_PLACEMENT_3D('',#78623,#78624,#78625); +#78623 = CARTESIAN_POINT('',(2.2,0.,1.3)); +#78624 = DIRECTION('',(1.,0.,0.)); +#78625 = DIRECTION('',(0.,0.,1.)); +#78626 = ADVANCED_FACE('',(#78627),#78632,.T.); +#78627 = FACE_BOUND('',#78628,.T.); +#78628 = EDGE_LOOP('',(#78629,#78630,#78631)); +#78629 = ORIENTED_EDGE('',*,*,#78601,.F.); +#78630 = ORIENTED_EDGE('',*,*,#77932,.T.); +#78631 = ORIENTED_EDGE('',*,*,#77901,.T.); +#78632 = PLANE('',#78633); +#78633 = AXIS2_PLACEMENT_3D('',#78634,#78635,#78636); +#78634 = CARTESIAN_POINT('',(2.2,0.,1.3)); +#78635 = DIRECTION('',(1.,0.,0.)); +#78636 = DIRECTION('',(0.,0.,1.)); +#78637 = ADVANCED_FACE('',(#78638,#78652),#78756,.T.); +#78638 = FACE_BOUND('',#78639,.T.); +#78639 = EDGE_LOOP('',(#78640,#78641,#78642,#78643,#78644,#78645,#78646, + #78647,#78648,#78649,#78650,#78651)); +#78640 = ORIENTED_EDGE('',*,*,#78296,.F.); +#78641 = ORIENTED_EDGE('',*,*,#78263,.T.); +#78642 = ORIENTED_EDGE('',*,*,#78239,.T.); +#78643 = ORIENTED_EDGE('',*,*,#78508,.T.); +#78644 = ORIENTED_EDGE('',*,*,#78491,.T.); +#78645 = ORIENTED_EDGE('',*,*,#78459,.T.); +#78646 = ORIENTED_EDGE('',*,*,#78442,.T.); +#78647 = ORIENTED_EDGE('',*,*,#78410,.T.); +#78648 = ORIENTED_EDGE('',*,*,#78395,.T.); +#78649 = ORIENTED_EDGE('',*,*,#78361,.T.); +#78650 = ORIENTED_EDGE('',*,*,#78344,.T.); +#78651 = ORIENTED_EDGE('',*,*,#78312,.T.); +#78652 = FACE_BOUND('',#78653,.T.); +#78653 = EDGE_LOOP('',(#78654,#78664,#78673,#78681,#78690,#78698,#78707, + #78715,#78724,#78732,#78741,#78749)); +#78654 = ORIENTED_EDGE('',*,*,#78655,.F.); +#78655 = EDGE_CURVE('',#78656,#78658,#78660,.T.); +#78656 = VERTEX_POINT('',#78657); +#78657 = CARTESIAN_POINT('',(-1.2,-0.8,1.5)); +#78658 = VERTEX_POINT('',#78659); +#78659 = CARTESIAN_POINT('',(-0.6,-0.8,1.5)); +#78660 = LINE('',#78661,#78662); +#78661 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78662 = VECTOR('',#78663,1.); +#78663 = DIRECTION('',(1.,0.,0.)); +#78664 = ORIENTED_EDGE('',*,*,#78665,.T.); +#78665 = EDGE_CURVE('',#78656,#78666,#78668,.T.); +#78666 = VERTEX_POINT('',#78667); +#78667 = CARTESIAN_POINT('',(-1.3,-0.7,1.5)); +#78668 = CIRCLE('',#78669,0.1); +#78669 = AXIS2_PLACEMENT_3D('',#78670,#78671,#78672); +#78670 = CARTESIAN_POINT('',(-1.2,-0.7,1.5)); +#78671 = DIRECTION('',(-0.,-0.,-1.)); +#78672 = DIRECTION('',(0.,-1.,0.)); +#78673 = ORIENTED_EDGE('',*,*,#78674,.F.); +#78674 = EDGE_CURVE('',#78675,#78666,#78677,.T.); +#78675 = VERTEX_POINT('',#78676); +#78676 = CARTESIAN_POINT('',(-1.3,0.7,1.5)); +#78677 = LINE('',#78678,#78679); +#78678 = CARTESIAN_POINT('',(-1.3,0.8,1.5)); +#78679 = VECTOR('',#78680,1.); +#78680 = DIRECTION('',(0.,-1.,0.)); +#78681 = ORIENTED_EDGE('',*,*,#78682,.F.); +#78682 = EDGE_CURVE('',#78683,#78675,#78685,.T.); +#78683 = VERTEX_POINT('',#78684); +#78684 = CARTESIAN_POINT('',(-1.2,0.8,1.5)); +#78685 = CIRCLE('',#78686,0.1); +#78686 = AXIS2_PLACEMENT_3D('',#78687,#78688,#78689); +#78687 = CARTESIAN_POINT('',(-1.2,0.7,1.5)); +#78688 = DIRECTION('',(-0.,0.,1.)); +#78689 = DIRECTION('',(0.,-1.,0.)); +#78690 = ORIENTED_EDGE('',*,*,#78691,.F.); +#78691 = EDGE_CURVE('',#78692,#78683,#78694,.T.); +#78692 = VERTEX_POINT('',#78693); +#78693 = CARTESIAN_POINT('',(-0.6,0.8,1.5)); +#78694 = LINE('',#78695,#78696); +#78695 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78696 = VECTOR('',#78697,1.); +#78697 = DIRECTION('',(-1.,0.,0.)); +#78698 = ORIENTED_EDGE('',*,*,#78699,.F.); +#78699 = EDGE_CURVE('',#78700,#78692,#78702,.T.); +#78700 = VERTEX_POINT('',#78701); +#78701 = CARTESIAN_POINT('',(0.6,0.8,1.5)); +#78702 = CIRCLE('',#78703,1.); +#78703 = AXIS2_PLACEMENT_3D('',#78704,#78705,#78706); +#78704 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78705 = DIRECTION('',(0.,0.,1.)); +#78706 = DIRECTION('',(1.,0.,-0.)); +#78707 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78708 = EDGE_CURVE('',#78709,#78700,#78711,.T.); +#78709 = VERTEX_POINT('',#78710); +#78710 = CARTESIAN_POINT('',(1.2,0.8,1.5)); +#78711 = LINE('',#78712,#78713); +#78712 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78713 = VECTOR('',#78714,1.); +#78714 = DIRECTION('',(-1.,0.,0.)); +#78715 = ORIENTED_EDGE('',*,*,#78716,.F.); +#78716 = EDGE_CURVE('',#78717,#78709,#78719,.T.); +#78717 = VERTEX_POINT('',#78718); +#78718 = CARTESIAN_POINT('',(1.3,0.7,1.5)); +#78719 = CIRCLE('',#78720,0.1); +#78720 = AXIS2_PLACEMENT_3D('',#78721,#78722,#78723); +#78721 = CARTESIAN_POINT('',(1.2,0.7,1.5)); +#78722 = DIRECTION('',(-0.,0.,1.)); +#78723 = DIRECTION('',(0.,-1.,0.)); +#78724 = ORIENTED_EDGE('',*,*,#78725,.F.); +#78725 = EDGE_CURVE('',#78726,#78717,#78728,.T.); +#78726 = VERTEX_POINT('',#78727); +#78727 = CARTESIAN_POINT('',(1.3,-0.7,1.5)); +#78728 = LINE('',#78729,#78730); +#78729 = CARTESIAN_POINT('',(1.3,-0.8,1.5)); +#78730 = VECTOR('',#78731,1.); +#78731 = DIRECTION('',(0.,1.,0.)); +#78732 = ORIENTED_EDGE('',*,*,#78733,.F.); +#78733 = EDGE_CURVE('',#78734,#78726,#78736,.T.); +#78734 = VERTEX_POINT('',#78735); +#78735 = CARTESIAN_POINT('',(1.2,-0.8,1.5)); +#78736 = CIRCLE('',#78737,0.1); +#78737 = AXIS2_PLACEMENT_3D('',#78738,#78739,#78740); +#78738 = CARTESIAN_POINT('',(1.2,-0.7,1.5)); +#78739 = DIRECTION('',(-0.,0.,1.)); +#78740 = DIRECTION('',(0.,-1.,0.)); +#78741 = ORIENTED_EDGE('',*,*,#78742,.F.); +#78742 = EDGE_CURVE('',#78743,#78734,#78745,.T.); +#78743 = VERTEX_POINT('',#78744); +#78744 = CARTESIAN_POINT('',(0.6,-0.8,1.5)); +#78745 = LINE('',#78746,#78747); +#78746 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78747 = VECTOR('',#78748,1.); +#78748 = DIRECTION('',(1.,0.,0.)); +#78749 = ORIENTED_EDGE('',*,*,#78750,.F.); +#78750 = EDGE_CURVE('',#78658,#78743,#78751,.T.); +#78751 = CIRCLE('',#78752,1.); +#78752 = AXIS2_PLACEMENT_3D('',#78753,#78754,#78755); +#78753 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78754 = DIRECTION('',(0.,0.,1.)); +#78755 = DIRECTION('',(1.,0.,-0.)); +#78756 = PLANE('',#78757); +#78757 = AXIS2_PLACEMENT_3D('',#78758,#78759,#78760); +#78758 = CARTESIAN_POINT('',(-5.621382403165E-17,-5.621382403165E-17,1.5 + )); +#78759 = DIRECTION('',(0.,0.,1.)); +#78760 = DIRECTION('',(1.,0.,-0.)); +#78761 = ADVANCED_FACE('',(#78762),#78787,.F.); +#78762 = FACE_BOUND('',#78763,.F.); +#78763 = EDGE_LOOP('',(#78764,#78772,#78773,#78781)); +#78764 = ORIENTED_EDGE('',*,*,#78765,.T.); +#78765 = EDGE_CURVE('',#78766,#78658,#78768,.T.); +#78766 = VERTEX_POINT('',#78767); +#78767 = CARTESIAN_POINT('',(-0.6,-0.8,2.)); +#78768 = LINE('',#78769,#78770); +#78769 = CARTESIAN_POINT('',(-0.6,-0.8,1.5)); +#78770 = VECTOR('',#78771,1.); +#78771 = DIRECTION('',(-0.,-0.,-1.)); +#78772 = ORIENTED_EDGE('',*,*,#78655,.F.); +#78773 = ORIENTED_EDGE('',*,*,#78774,.T.); +#78774 = EDGE_CURVE('',#78656,#78775,#78777,.T.); +#78775 = VERTEX_POINT('',#78776); +#78776 = CARTESIAN_POINT('',(-1.2,-0.8,2.)); +#78777 = LINE('',#78778,#78779); +#78778 = CARTESIAN_POINT('',(-1.2,-0.8,1.5)); +#78779 = VECTOR('',#78780,1.); +#78780 = DIRECTION('',(0.,0.,1.)); +#78781 = ORIENTED_EDGE('',*,*,#78782,.F.); +#78782 = EDGE_CURVE('',#78766,#78775,#78783,.T.); +#78783 = LINE('',#78784,#78785); +#78784 = CARTESIAN_POINT('',(-0.6,-0.8,2.)); +#78785 = VECTOR('',#78786,1.); +#78786 = DIRECTION('',(-1.,-0.,-0.)); +#78787 = PLANE('',#78788); +#78788 = AXIS2_PLACEMENT_3D('',#78789,#78790,#78791); +#78789 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78790 = DIRECTION('',(0.,1.,0.)); +#78791 = DIRECTION('',(1.,0.,0.)); +#78792 = ADVANCED_FACE('',(#78793),#78812,.T.); +#78793 = FACE_BOUND('',#78794,.T.); +#78794 = EDGE_LOOP('',(#78795,#78804,#78805,#78806)); +#78795 = ORIENTED_EDGE('',*,*,#78796,.F.); +#78796 = EDGE_CURVE('',#78766,#78797,#78799,.T.); +#78797 = VERTEX_POINT('',#78798); +#78798 = CARTESIAN_POINT('',(0.6,-0.8,2.)); +#78799 = CIRCLE('',#78800,1.); +#78800 = AXIS2_PLACEMENT_3D('',#78801,#78802,#78803); +#78801 = CARTESIAN_POINT('',(0.,0.,2.)); +#78802 = DIRECTION('',(0.,0.,1.)); +#78803 = DIRECTION('',(-0.6,-0.8,0.)); +#78804 = ORIENTED_EDGE('',*,*,#78765,.T.); +#78805 = ORIENTED_EDGE('',*,*,#78750,.T.); +#78806 = ORIENTED_EDGE('',*,*,#78807,.F.); +#78807 = EDGE_CURVE('',#78797,#78743,#78808,.T.); +#78808 = LINE('',#78809,#78810); +#78809 = CARTESIAN_POINT('',(0.6,-0.8,1.5)); +#78810 = VECTOR('',#78811,1.); +#78811 = DIRECTION('',(-0.,-0.,-1.)); +#78812 = CYLINDRICAL_SURFACE('',#78813,1.); +#78813 = AXIS2_PLACEMENT_3D('',#78814,#78815,#78816); +#78814 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78815 = DIRECTION('',(-0.,-0.,-1.)); +#78816 = DIRECTION('',(1.,0.,0.)); +#78817 = ADVANCED_FACE('',(#78818),#78836,.F.); +#78818 = FACE_BOUND('',#78819,.F.); +#78819 = EDGE_LOOP('',(#78820,#78828,#78829,#78830)); +#78820 = ORIENTED_EDGE('',*,*,#78821,.F.); +#78821 = EDGE_CURVE('',#78734,#78822,#78824,.T.); +#78822 = VERTEX_POINT('',#78823); +#78823 = CARTESIAN_POINT('',(1.2,-0.8,2.)); +#78824 = LINE('',#78825,#78826); +#78825 = CARTESIAN_POINT('',(1.2,-0.8,1.5)); +#78826 = VECTOR('',#78827,1.); +#78827 = DIRECTION('',(0.,0.,1.)); +#78828 = ORIENTED_EDGE('',*,*,#78742,.F.); +#78829 = ORIENTED_EDGE('',*,*,#78807,.F.); +#78830 = ORIENTED_EDGE('',*,*,#78831,.T.); +#78831 = EDGE_CURVE('',#78797,#78822,#78832,.T.); +#78832 = LINE('',#78833,#78834); +#78833 = CARTESIAN_POINT('',(0.6,-0.8,2.)); +#78834 = VECTOR('',#78835,1.); +#78835 = DIRECTION('',(1.,0.,0.)); +#78836 = PLANE('',#78837); +#78837 = AXIS2_PLACEMENT_3D('',#78838,#78839,#78840); +#78838 = CARTESIAN_POINT('',(-1.3,-0.8,1.5)); +#78839 = DIRECTION('',(0.,1.,0.)); +#78840 = DIRECTION('',(1.,0.,0.)); +#78841 = ADVANCED_FACE('',(#78842),#78861,.T.); +#78842 = FACE_BOUND('',#78843,.T.); +#78843 = EDGE_LOOP('',(#78844,#78845,#78846,#78854)); +#78844 = ORIENTED_EDGE('',*,*,#78821,.F.); +#78845 = ORIENTED_EDGE('',*,*,#78733,.T.); +#78846 = ORIENTED_EDGE('',*,*,#78847,.T.); +#78847 = EDGE_CURVE('',#78726,#78848,#78850,.T.); +#78848 = VERTEX_POINT('',#78849); +#78849 = CARTESIAN_POINT('',(1.3,-0.7,2.)); +#78850 = LINE('',#78851,#78852); +#78851 = CARTESIAN_POINT('',(1.3,-0.7,1.5)); +#78852 = VECTOR('',#78853,1.); +#78853 = DIRECTION('',(0.,0.,1.)); +#78854 = ORIENTED_EDGE('',*,*,#78855,.F.); +#78855 = EDGE_CURVE('',#78822,#78848,#78856,.T.); +#78856 = CIRCLE('',#78857,0.1); +#78857 = AXIS2_PLACEMENT_3D('',#78858,#78859,#78860); +#78858 = CARTESIAN_POINT('',(1.2,-0.7,2.)); +#78859 = DIRECTION('',(-0.,0.,1.)); +#78860 = DIRECTION('',(0.,-1.,0.)); +#78861 = CYLINDRICAL_SURFACE('',#78862,0.1); +#78862 = AXIS2_PLACEMENT_3D('',#78863,#78864,#78865); +#78863 = CARTESIAN_POINT('',(1.2,-0.7,1.5)); +#78864 = DIRECTION('',(0.,0.,1.)); +#78865 = DIRECTION('',(0.,-1.,0.)); +#78866 = ADVANCED_FACE('',(#78867),#78885,.F.); +#78867 = FACE_BOUND('',#78868,.F.); +#78868 = EDGE_LOOP('',(#78869,#78870,#78878,#78884)); +#78869 = ORIENTED_EDGE('',*,*,#78847,.T.); +#78870 = ORIENTED_EDGE('',*,*,#78871,.T.); +#78871 = EDGE_CURVE('',#78848,#78872,#78874,.T.); +#78872 = VERTEX_POINT('',#78873); +#78873 = CARTESIAN_POINT('',(1.3,0.7,2.)); +#78874 = LINE('',#78875,#78876); +#78875 = CARTESIAN_POINT('',(1.3,-0.7,2.)); +#78876 = VECTOR('',#78877,1.); +#78877 = DIRECTION('',(0.,1.,0.)); +#78878 = ORIENTED_EDGE('',*,*,#78879,.F.); +#78879 = EDGE_CURVE('',#78717,#78872,#78880,.T.); +#78880 = LINE('',#78881,#78882); +#78881 = CARTESIAN_POINT('',(1.3,0.7,1.5)); +#78882 = VECTOR('',#78883,1.); +#78883 = DIRECTION('',(0.,0.,1.)); +#78884 = ORIENTED_EDGE('',*,*,#78725,.F.); +#78885 = PLANE('',#78886); +#78886 = AXIS2_PLACEMENT_3D('',#78887,#78888,#78889); +#78887 = CARTESIAN_POINT('',(1.3,-0.8,1.5)); +#78888 = DIRECTION('',(-1.,0.,0.)); +#78889 = DIRECTION('',(0.,1.,0.)); +#78890 = ADVANCED_FACE('',(#78891),#78910,.T.); +#78891 = FACE_BOUND('',#78892,.T.); +#78892 = EDGE_LOOP('',(#78893,#78894,#78895,#78903)); +#78893 = ORIENTED_EDGE('',*,*,#78879,.F.); +#78894 = ORIENTED_EDGE('',*,*,#78716,.T.); +#78895 = ORIENTED_EDGE('',*,*,#78896,.T.); +#78896 = EDGE_CURVE('',#78709,#78897,#78899,.T.); +#78897 = VERTEX_POINT('',#78898); +#78898 = CARTESIAN_POINT('',(1.2,0.8,2.)); +#78899 = LINE('',#78900,#78901); +#78900 = CARTESIAN_POINT('',(1.2,0.8,1.5)); +#78901 = VECTOR('',#78902,1.); +#78902 = DIRECTION('',(0.,0.,1.)); +#78903 = ORIENTED_EDGE('',*,*,#78904,.F.); +#78904 = EDGE_CURVE('',#78872,#78897,#78905,.T.); +#78905 = CIRCLE('',#78906,0.1); +#78906 = AXIS2_PLACEMENT_3D('',#78907,#78908,#78909); +#78907 = CARTESIAN_POINT('',(1.2,0.7,2.)); +#78908 = DIRECTION('',(0.,-0.,1.)); +#78909 = DIRECTION('',(1.,1.110223024625E-15,0.)); +#78910 = CYLINDRICAL_SURFACE('',#78911,0.1); +#78911 = AXIS2_PLACEMENT_3D('',#78912,#78913,#78914); +#78912 = CARTESIAN_POINT('',(1.2,0.7,1.5)); +#78913 = DIRECTION('',(0.,0.,1.)); +#78914 = DIRECTION('',(1.,0.,-0.)); +#78915 = ADVANCED_FACE('',(#78916),#78934,.F.); +#78916 = FACE_BOUND('',#78917,.F.); +#78917 = EDGE_LOOP('',(#78918,#78926,#78927,#78928)); +#78918 = ORIENTED_EDGE('',*,*,#78919,.T.); +#78919 = EDGE_CURVE('',#78920,#78700,#78922,.T.); +#78920 = VERTEX_POINT('',#78921); +#78921 = CARTESIAN_POINT('',(0.6,0.8,2.)); +#78922 = LINE('',#78923,#78924); +#78923 = CARTESIAN_POINT('',(0.6,0.8,1.5)); +#78924 = VECTOR('',#78925,1.); +#78925 = DIRECTION('',(-0.,-0.,-1.)); +#78926 = ORIENTED_EDGE('',*,*,#78708,.F.); +#78927 = ORIENTED_EDGE('',*,*,#78896,.T.); +#78928 = ORIENTED_EDGE('',*,*,#78929,.T.); +#78929 = EDGE_CURVE('',#78897,#78920,#78930,.T.); +#78930 = LINE('',#78931,#78932); +#78931 = CARTESIAN_POINT('',(1.2,0.8,2.)); +#78932 = VECTOR('',#78933,1.); +#78933 = DIRECTION('',(-1.,0.,0.)); +#78934 = PLANE('',#78935); +#78935 = AXIS2_PLACEMENT_3D('',#78936,#78937,#78938); +#78936 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78937 = DIRECTION('',(0.,-1.,0.)); +#78938 = DIRECTION('',(-1.,0.,0.)); +#78939 = ADVANCED_FACE('',(#78940),#78959,.T.); +#78940 = FACE_BOUND('',#78941,.T.); +#78941 = EDGE_LOOP('',(#78942,#78951,#78952,#78953)); +#78942 = ORIENTED_EDGE('',*,*,#78943,.F.); +#78943 = EDGE_CURVE('',#78920,#78944,#78946,.T.); +#78944 = VERTEX_POINT('',#78945); +#78945 = CARTESIAN_POINT('',(-0.6,0.8,2.)); +#78946 = CIRCLE('',#78947,1.); +#78947 = AXIS2_PLACEMENT_3D('',#78948,#78949,#78950); +#78948 = CARTESIAN_POINT('',(0.,0.,2.)); +#78949 = DIRECTION('',(0.,-0.,1.)); +#78950 = DIRECTION('',(0.6,0.8,0.)); +#78951 = ORIENTED_EDGE('',*,*,#78919,.T.); +#78952 = ORIENTED_EDGE('',*,*,#78699,.T.); +#78953 = ORIENTED_EDGE('',*,*,#78954,.F.); +#78954 = EDGE_CURVE('',#78944,#78692,#78955,.T.); +#78955 = LINE('',#78956,#78957); +#78956 = CARTESIAN_POINT('',(-0.6,0.8,1.5)); +#78957 = VECTOR('',#78958,1.); +#78958 = DIRECTION('',(-0.,-0.,-1.)); +#78959 = CYLINDRICAL_SURFACE('',#78960,1.); +#78960 = AXIS2_PLACEMENT_3D('',#78961,#78962,#78963); +#78961 = CARTESIAN_POINT('',(0.,0.,1.5)); +#78962 = DIRECTION('',(-0.,-0.,-1.)); +#78963 = DIRECTION('',(1.,0.,0.)); +#78964 = ADVANCED_FACE('',(#78965),#78983,.F.); +#78965 = FACE_BOUND('',#78966,.F.); +#78966 = EDGE_LOOP('',(#78967,#78975,#78976,#78977)); +#78967 = ORIENTED_EDGE('',*,*,#78968,.F.); +#78968 = EDGE_CURVE('',#78683,#78969,#78971,.T.); +#78969 = VERTEX_POINT('',#78970); +#78970 = CARTESIAN_POINT('',(-1.2,0.8,2.)); +#78971 = LINE('',#78972,#78973); +#78972 = CARTESIAN_POINT('',(-1.2,0.8,1.5)); +#78973 = VECTOR('',#78974,1.); +#78974 = DIRECTION('',(0.,0.,1.)); +#78975 = ORIENTED_EDGE('',*,*,#78691,.F.); +#78976 = ORIENTED_EDGE('',*,*,#78954,.F.); +#78977 = ORIENTED_EDGE('',*,*,#78978,.F.); +#78978 = EDGE_CURVE('',#78969,#78944,#78979,.T.); +#78979 = LINE('',#78980,#78981); +#78980 = CARTESIAN_POINT('',(-1.2,0.8,2.)); +#78981 = VECTOR('',#78982,1.); +#78982 = DIRECTION('',(1.,0.,0.)); +#78983 = PLANE('',#78984); +#78984 = AXIS2_PLACEMENT_3D('',#78985,#78986,#78987); +#78985 = CARTESIAN_POINT('',(1.3,0.8,1.5)); +#78986 = DIRECTION('',(0.,-1.,0.)); +#78987 = DIRECTION('',(-1.,0.,0.)); +#78988 = ADVANCED_FACE('',(#78989),#79008,.T.); +#78989 = FACE_BOUND('',#78990,.T.); +#78990 = EDGE_LOOP('',(#78991,#78992,#78993,#79001)); +#78991 = ORIENTED_EDGE('',*,*,#78968,.F.); +#78992 = ORIENTED_EDGE('',*,*,#78682,.T.); +#78993 = ORIENTED_EDGE('',*,*,#78994,.T.); +#78994 = EDGE_CURVE('',#78675,#78995,#78997,.T.); +#78995 = VERTEX_POINT('',#78996); +#78996 = CARTESIAN_POINT('',(-1.3,0.7,2.)); +#78997 = LINE('',#78998,#78999); +#78998 = CARTESIAN_POINT('',(-1.3,0.7,1.5)); +#78999 = VECTOR('',#79000,1.); +#79000 = DIRECTION('',(0.,0.,1.)); +#79001 = ORIENTED_EDGE('',*,*,#79002,.T.); +#79002 = EDGE_CURVE('',#78995,#78969,#79003,.T.); +#79003 = CIRCLE('',#79004,0.1); +#79004 = AXIS2_PLACEMENT_3D('',#79005,#79006,#79007); +#79005 = CARTESIAN_POINT('',(-1.2,0.7,2.)); +#79006 = DIRECTION('',(0.,0.,-1.)); +#79007 = DIRECTION('',(-1.,0.,0.)); +#79008 = CYLINDRICAL_SURFACE('',#79009,0.1); +#79009 = AXIS2_PLACEMENT_3D('',#79010,#79011,#79012); +#79010 = CARTESIAN_POINT('',(-1.2,0.7,1.5)); +#79011 = DIRECTION('',(0.,0.,1.)); +#79012 = DIRECTION('',(0.,1.,0.)); +#79013 = ADVANCED_FACE('',(#79014),#79032,.F.); +#79014 = FACE_BOUND('',#79015,.F.); +#79015 = EDGE_LOOP('',(#79016,#79017,#79025,#79031)); +#79016 = ORIENTED_EDGE('',*,*,#78994,.T.); +#79017 = ORIENTED_EDGE('',*,*,#79018,.F.); +#79018 = EDGE_CURVE('',#79019,#78995,#79021,.T.); +#79019 = VERTEX_POINT('',#79020); +#79020 = CARTESIAN_POINT('',(-1.3,-0.7,2.)); +#79021 = LINE('',#79022,#79023); +#79022 = CARTESIAN_POINT('',(-1.3,-0.7,2.)); +#79023 = VECTOR('',#79024,1.); +#79024 = DIRECTION('',(0.,1.,0.)); +#79025 = ORIENTED_EDGE('',*,*,#79026,.F.); +#79026 = EDGE_CURVE('',#78666,#79019,#79027,.T.); +#79027 = LINE('',#79028,#79029); +#79028 = CARTESIAN_POINT('',(-1.3,-0.7,1.5)); +#79029 = VECTOR('',#79030,1.); +#79030 = DIRECTION('',(0.,0.,1.)); +#79031 = ORIENTED_EDGE('',*,*,#78674,.F.); +#79032 = PLANE('',#79033); +#79033 = AXIS2_PLACEMENT_3D('',#79034,#79035,#79036); +#79034 = CARTESIAN_POINT('',(-1.3,0.8,1.5)); +#79035 = DIRECTION('',(1.,0.,0.)); +#79036 = DIRECTION('',(0.,-1.,0.)); +#79037 = ADVANCED_FACE('',(#79038),#79050,.T.); +#79038 = FACE_BOUND('',#79039,.T.); +#79039 = EDGE_LOOP('',(#79040,#79047,#79048,#79049)); +#79040 = ORIENTED_EDGE('',*,*,#79041,.T.); +#79041 = EDGE_CURVE('',#78775,#79019,#79042,.T.); +#79042 = CIRCLE('',#79043,0.1); +#79043 = AXIS2_PLACEMENT_3D('',#79044,#79045,#79046); +#79044 = CARTESIAN_POINT('',(-1.2,-0.7,2.)); +#79045 = DIRECTION('',(-0.,-0.,-1.)); +#79046 = DIRECTION('',(0.,-1.,0.)); +#79047 = ORIENTED_EDGE('',*,*,#79026,.F.); +#79048 = ORIENTED_EDGE('',*,*,#78665,.F.); +#79049 = ORIENTED_EDGE('',*,*,#78774,.T.); +#79050 = CYLINDRICAL_SURFACE('',#79051,0.1); +#79051 = AXIS2_PLACEMENT_3D('',#79052,#79053,#79054); +#79052 = CARTESIAN_POINT('',(-1.2,-0.7,1.5)); +#79053 = DIRECTION('',(0.,0.,1.)); +#79054 = DIRECTION('',(0.,-1.,0.)); +#79055 = ADVANCED_FACE('',(#79056),#79087,.T.); +#79056 = FACE_BOUND('',#79057,.T.); +#79057 = EDGE_LOOP('',(#79058,#79068,#79075,#79076)); +#79058 = ORIENTED_EDGE('',*,*,#79059,.T.); +#79059 = EDGE_CURVE('',#79060,#79062,#79064,.T.); +#79060 = VERTEX_POINT('',#79061); +#79061 = CARTESIAN_POINT('',(-0.565685424949,-0.7,2.1)); +#79062 = VERTEX_POINT('',#79063); +#79063 = CARTESIAN_POINT('',(-1.2,-0.7,2.1)); +#79064 = LINE('',#79065,#79066); +#79065 = CARTESIAN_POINT('',(-0.6,-0.7,2.1)); +#79066 = VECTOR('',#79067,1.); +#79067 = DIRECTION('',(-1.,-0.,-0.)); +#79068 = ORIENTED_EDGE('',*,*,#79069,.T.); +#79069 = EDGE_CURVE('',#79062,#78775,#79070,.T.); +#79070 = CIRCLE('',#79071,0.1); +#79071 = AXIS2_PLACEMENT_3D('',#79072,#79073,#79074); +#79072 = CARTESIAN_POINT('',(-1.2,-0.7,2.)); +#79073 = DIRECTION('',(1.,0.,-0.)); +#79074 = DIRECTION('',(0.,0.,1.)); +#79075 = ORIENTED_EDGE('',*,*,#78782,.F.); +#79076 = ORIENTED_EDGE('',*,*,#79077,.F.); +#79077 = EDGE_CURVE('',#79060,#78766,#79078,.T.); +#79078 = B_SPLINE_CURVE_WITH_KNOTS('',7,(#79079,#79080,#79081,#79082, + #79083,#79084,#79085,#79086),.UNSPECIFIED.,.F.,.F.,(8,8),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#79079 = CARTESIAN_POINT('',(-0.565685424156,-0.700000000641,2.1)); +#79080 = CARTESIAN_POINT('',(-0.573614625672,-0.722427218397, + 2.100000043248)); +#79081 = CARTESIAN_POINT('',(-0.58141526827,-0.744857178351, + 2.094131678139)); +#79082 = CARTESIAN_POINT('',(-0.588443462497,-0.765449065181, + 2.082393665523)); +#79083 = CARTESIAN_POINT('',(-0.594119325519,-0.782358778558, + 2.065500755754)); +#79084 = CARTESIAN_POINT('',(-0.598040071622,-0.794120053025, + 2.044901293507)); +#79085 = CARTESIAN_POINT('',(-0.6,-0.8,2.022449749876)); +#79086 = CARTESIAN_POINT('',(-0.6,-0.8,2.)); +#79087 = CYLINDRICAL_SURFACE('',#79088,0.1); +#79088 = AXIS2_PLACEMENT_3D('',#79089,#79090,#79091); +#79089 = CARTESIAN_POINT('',(-0.6,-0.7,2.)); +#79090 = DIRECTION('',(-1.,-0.,-0.)); +#79091 = DIRECTION('',(-0.,0.,1.)); +#79092 = ADVANCED_FACE('',(#79093),#79117,.T.); +#79093 = FACE_BOUND('',#79094,.T.); +#79094 = EDGE_LOOP('',(#79095,#79096,#79097,#79110)); +#79095 = ORIENTED_EDGE('',*,*,#79077,.T.); +#79096 = ORIENTED_EDGE('',*,*,#78796,.T.); +#79097 = ORIENTED_EDGE('',*,*,#79098,.F.); +#79098 = EDGE_CURVE('',#79099,#78797,#79101,.T.); +#79099 = VERTEX_POINT('',#79100); +#79100 = CARTESIAN_POINT('',(0.565685424949,-0.7,2.1)); +#79101 = B_SPLINE_CURVE_WITH_KNOTS('',7,(#79102,#79103,#79104,#79105, + #79106,#79107,#79108,#79109),.UNSPECIFIED.,.F.,.F.,(8,8),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#79102 = CARTESIAN_POINT('',(0.565685424949,-0.7,2.1)); +#79103 = CARTESIAN_POINT('',(0.573614622663,-0.722427219151, + 2.10000004332)); +#79104 = CARTESIAN_POINT('',(0.581415273379,-0.744857176312, + 2.094131678258)); +#79105 = CARTESIAN_POINT('',(0.588443457011,-0.765449066963, + 2.082393665662)); +#79106 = CARTESIAN_POINT('',(0.594119328759,-0.782358777333, + 2.065500755879)); +#79107 = CARTESIAN_POINT('',(0.598040070707,-0.794120053321,2.0449012936 + )); +#79108 = CARTESIAN_POINT('',(0.6,-0.8,2.022449749922)); +#79109 = CARTESIAN_POINT('',(0.6,-0.8,2.)); +#79110 = ORIENTED_EDGE('',*,*,#79111,.F.); +#79111 = EDGE_CURVE('',#79060,#79099,#79112,.T.); +#79112 = CIRCLE('',#79113,0.9); +#79113 = AXIS2_PLACEMENT_3D('',#79114,#79115,#79116); +#79114 = CARTESIAN_POINT('',(0.,0.,2.1)); +#79115 = DIRECTION('',(0.,0.,1.)); +#79116 = DIRECTION('',(-0.6,-0.8,0.)); +#79117 = TOROIDAL_SURFACE('',#79118,0.9,0.1); +#79118 = AXIS2_PLACEMENT_3D('',#79119,#79120,#79121); +#79119 = CARTESIAN_POINT('',(0.,0.,2.)); +#79120 = DIRECTION('',(0.,0.,1.)); +#79121 = DIRECTION('',(-0.6,-0.8,0.)); +#79122 = ADVANCED_FACE('',(#79123),#79142,.T.); +#79123 = FACE_BOUND('',#79124,.T.); +#79124 = EDGE_LOOP('',(#79125,#79126,#79127,#79136)); +#79125 = ORIENTED_EDGE('',*,*,#79098,.T.); +#79126 = ORIENTED_EDGE('',*,*,#78831,.T.); +#79127 = ORIENTED_EDGE('',*,*,#79128,.F.); +#79128 = EDGE_CURVE('',#79129,#78822,#79131,.T.); +#79129 = VERTEX_POINT('',#79130); +#79130 = CARTESIAN_POINT('',(1.2,-0.7,2.1)); +#79131 = CIRCLE('',#79132,0.1); +#79132 = AXIS2_PLACEMENT_3D('',#79133,#79134,#79135); +#79133 = CARTESIAN_POINT('',(1.2,-0.7,2.)); +#79134 = DIRECTION('',(1.,0.,-0.)); +#79135 = DIRECTION('',(0.,0.,1.)); +#79136 = ORIENTED_EDGE('',*,*,#79137,.F.); +#79137 = EDGE_CURVE('',#79099,#79129,#79138,.T.); +#79138 = LINE('',#79139,#79140); +#79139 = CARTESIAN_POINT('',(0.6,-0.7,2.1)); +#79140 = VECTOR('',#79141,1.); +#79141 = DIRECTION('',(1.,0.,0.)); +#79142 = CYLINDRICAL_SURFACE('',#79143,0.1); +#79143 = AXIS2_PLACEMENT_3D('',#79144,#79145,#79146); +#79144 = CARTESIAN_POINT('',(0.6,-0.7,2.)); +#79145 = DIRECTION('',(1.,0.,0.)); +#79146 = DIRECTION('',(0.,0.,1.)); +#79147 = ADVANCED_FACE('',(#79148),#79159,.T.); +#79148 = FACE_BOUND('',#79149,.T.); +#79149 = EDGE_LOOP('',(#79150,#79151,#79158)); +#79150 = ORIENTED_EDGE('',*,*,#78855,.T.); +#79151 = ORIENTED_EDGE('',*,*,#79152,.F.); +#79152 = EDGE_CURVE('',#79129,#78848,#79153,.T.); +#79153 = CIRCLE('',#79154,0.1); +#79154 = AXIS2_PLACEMENT_3D('',#79155,#79156,#79157); +#79155 = CARTESIAN_POINT('',(1.2,-0.7,2.)); +#79156 = DIRECTION('',(6.123233995737E-17,1.,0.)); +#79157 = DIRECTION('',(1.,-6.123233995737E-17,0.)); +#79158 = ORIENTED_EDGE('',*,*,#79128,.T.); +#79159 = SPHERICAL_SURFACE('',#79160,0.1); +#79160 = AXIS2_PLACEMENT_3D('',#79161,#79162,#79163); +#79161 = CARTESIAN_POINT('',(1.2,-0.7,2.)); +#79162 = DIRECTION('',(-0.,-0.,-1.)); +#79163 = DIRECTION('',(0.,-1.,0.)); +#79164 = ADVANCED_FACE('',(#79165),#79184,.T.); +#79165 = FACE_BOUND('',#79166,.T.); +#79166 = EDGE_LOOP('',(#79167,#79168,#79169,#79178)); +#79167 = ORIENTED_EDGE('',*,*,#79152,.T.); +#79168 = ORIENTED_EDGE('',*,*,#78871,.T.); +#79169 = ORIENTED_EDGE('',*,*,#79170,.F.); +#79170 = EDGE_CURVE('',#79171,#78872,#79173,.T.); +#79171 = VERTEX_POINT('',#79172); +#79172 = CARTESIAN_POINT('',(1.2,0.7,2.1)); +#79173 = CIRCLE('',#79174,0.1); +#79174 = AXIS2_PLACEMENT_3D('',#79175,#79176,#79177); +#79175 = CARTESIAN_POINT('',(1.2,0.7,2.)); +#79176 = DIRECTION('',(0.,1.,0.)); +#79177 = DIRECTION('',(0.,-0.,1.)); +#79178 = ORIENTED_EDGE('',*,*,#79179,.F.); +#79179 = EDGE_CURVE('',#79129,#79171,#79180,.T.); +#79180 = LINE('',#79181,#79182); +#79181 = CARTESIAN_POINT('',(1.2,-0.7,2.1)); +#79182 = VECTOR('',#79183,1.); +#79183 = DIRECTION('',(0.,1.,0.)); +#79184 = CYLINDRICAL_SURFACE('',#79185,0.1); +#79185 = AXIS2_PLACEMENT_3D('',#79186,#79187,#79188); +#79186 = CARTESIAN_POINT('',(1.2,-0.7,2.)); +#79187 = DIRECTION('',(0.,1.,0.)); +#79188 = DIRECTION('',(0.,-0.,1.)); +#79189 = ADVANCED_FACE('',(#79190),#79201,.T.); +#79190 = FACE_BOUND('',#79191,.T.); +#79191 = EDGE_LOOP('',(#79192,#79193,#79200)); +#79192 = ORIENTED_EDGE('',*,*,#78904,.T.); +#79193 = ORIENTED_EDGE('',*,*,#79194,.F.); +#79194 = EDGE_CURVE('',#79171,#78897,#79195,.T.); +#79195 = CIRCLE('',#79196,0.1); +#79196 = AXIS2_PLACEMENT_3D('',#79197,#79198,#79199); +#79197 = CARTESIAN_POINT('',(1.2,0.7,2.)); +#79198 = DIRECTION('',(-1.,6.123233995737E-17,0.)); +#79199 = DIRECTION('',(6.123233995737E-17,1.,0.)); +#79200 = ORIENTED_EDGE('',*,*,#79170,.T.); +#79201 = SPHERICAL_SURFACE('',#79202,0.1); +#79202 = AXIS2_PLACEMENT_3D('',#79203,#79204,#79205); +#79203 = CARTESIAN_POINT('',(1.2,0.7,2.)); +#79204 = DIRECTION('',(-0.,-0.,-1.)); +#79205 = DIRECTION('',(1.,1.110223024625E-15,-0.)); +#79206 = ADVANCED_FACE('',(#79207),#79230,.T.); +#79207 = FACE_BOUND('',#79208,.T.); +#79208 = EDGE_LOOP('',(#79209,#79210,#79211,#79224)); +#79209 = ORIENTED_EDGE('',*,*,#79194,.T.); +#79210 = ORIENTED_EDGE('',*,*,#78929,.T.); +#79211 = ORIENTED_EDGE('',*,*,#79212,.F.); +#79212 = EDGE_CURVE('',#79213,#78920,#79215,.T.); +#79213 = VERTEX_POINT('',#79214); +#79214 = CARTESIAN_POINT('',(0.565685424949,0.7,2.1)); +#79215 = B_SPLINE_CURVE_WITH_KNOTS('',7,(#79216,#79217,#79218,#79219, + #79220,#79221,#79222,#79223),.UNSPECIFIED.,.F.,.F.,(8,8),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#79216 = CARTESIAN_POINT('',(0.565685424157,0.70000000064,2.1)); +#79217 = CARTESIAN_POINT('',(0.57361462567,0.722427218398,2.100000043248 + )); +#79218 = CARTESIAN_POINT('',(0.581415268274,0.744857178349, + 2.094131678139)); +#79219 = CARTESIAN_POINT('',(0.588443462493,0.765449065182, + 2.082393665523)); +#79220 = CARTESIAN_POINT('',(0.594119325521,0.782358778557, + 2.065500755754)); +#79221 = CARTESIAN_POINT('',(0.598040071621,0.794120053025, + 2.044901293507)); +#79222 = CARTESIAN_POINT('',(0.6,0.8,2.022449749876)); +#79223 = CARTESIAN_POINT('',(0.6,0.8,2.)); +#79224 = ORIENTED_EDGE('',*,*,#79225,.F.); +#79225 = EDGE_CURVE('',#79171,#79213,#79226,.T.); +#79226 = LINE('',#79227,#79228); +#79227 = CARTESIAN_POINT('',(1.2,0.7,2.1)); +#79228 = VECTOR('',#79229,1.); +#79229 = DIRECTION('',(-1.,0.,0.)); +#79230 = CYLINDRICAL_SURFACE('',#79231,0.1); +#79231 = AXIS2_PLACEMENT_3D('',#79232,#79233,#79234); +#79232 = CARTESIAN_POINT('',(1.2,0.7,2.)); +#79233 = DIRECTION('',(-1.,0.,0.)); +#79234 = DIRECTION('',(0.,0.,1.)); +#79235 = ADVANCED_FACE('',(#79236),#79260,.T.); +#79236 = FACE_BOUND('',#79237,.T.); +#79237 = EDGE_LOOP('',(#79238,#79239,#79240,#79253)); +#79238 = ORIENTED_EDGE('',*,*,#79212,.T.); +#79239 = ORIENTED_EDGE('',*,*,#78943,.T.); +#79240 = ORIENTED_EDGE('',*,*,#79241,.F.); +#79241 = EDGE_CURVE('',#79242,#78944,#79244,.T.); +#79242 = VERTEX_POINT('',#79243); +#79243 = CARTESIAN_POINT('',(-0.565685424949,0.7,2.1)); +#79244 = B_SPLINE_CURVE_WITH_KNOTS('',7,(#79245,#79246,#79247,#79248, + #79249,#79250,#79251,#79252),.UNSPECIFIED.,.F.,.F.,(8,8),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#79245 = CARTESIAN_POINT('',(-0.565685424949,0.7,2.1)); +#79246 = CARTESIAN_POINT('',(-0.573614622663,0.722427219151, + 2.10000004332)); +#79247 = CARTESIAN_POINT('',(-0.581415273379,0.744857176312, + 2.094131678258)); +#79248 = CARTESIAN_POINT('',(-0.588443457011,0.765449066963, + 2.082393665662)); +#79249 = CARTESIAN_POINT('',(-0.594119328759,0.782358777333, + 2.065500755879)); +#79250 = CARTESIAN_POINT('',(-0.598040070707,0.794120053321,2.0449012936 + )); +#79251 = CARTESIAN_POINT('',(-0.6,0.8,2.022449749922)); +#79252 = CARTESIAN_POINT('',(-0.6,0.8,2.)); +#79253 = ORIENTED_EDGE('',*,*,#79254,.F.); +#79254 = EDGE_CURVE('',#79213,#79242,#79255,.T.); +#79255 = CIRCLE('',#79256,0.9); +#79256 = AXIS2_PLACEMENT_3D('',#79257,#79258,#79259); +#79257 = CARTESIAN_POINT('',(0.,0.,2.1)); +#79258 = DIRECTION('',(0.,-0.,1.)); +#79259 = DIRECTION('',(0.6,0.8,0.)); +#79260 = TOROIDAL_SURFACE('',#79261,0.9,0.1); +#79261 = AXIS2_PLACEMENT_3D('',#79262,#79263,#79264); +#79262 = CARTESIAN_POINT('',(0.,0.,2.)); +#79263 = DIRECTION('',(-0.,-0.,-1.)); +#79264 = DIRECTION('',(0.6,0.8,-0.)); +#79265 = ADVANCED_FACE('',(#79266),#79285,.T.); +#79266 = FACE_BOUND('',#79267,.T.); +#79267 = EDGE_LOOP('',(#79268,#79276,#79277,#79278)); +#79268 = ORIENTED_EDGE('',*,*,#79269,.T.); +#79269 = EDGE_CURVE('',#79270,#79242,#79272,.T.); +#79270 = VERTEX_POINT('',#79271); +#79271 = CARTESIAN_POINT('',(-1.2,0.7,2.1)); +#79272 = LINE('',#79273,#79274); +#79273 = CARTESIAN_POINT('',(-1.2,0.7,2.1)); +#79274 = VECTOR('',#79275,1.); +#79275 = DIRECTION('',(1.,0.,0.)); +#79276 = ORIENTED_EDGE('',*,*,#79241,.T.); +#79277 = ORIENTED_EDGE('',*,*,#78978,.F.); +#79278 = ORIENTED_EDGE('',*,*,#79279,.F.); +#79279 = EDGE_CURVE('',#79270,#78969,#79280,.T.); +#79280 = CIRCLE('',#79281,0.1); +#79281 = AXIS2_PLACEMENT_3D('',#79282,#79283,#79284); +#79282 = CARTESIAN_POINT('',(-1.2,0.7,2.)); +#79283 = DIRECTION('',(-1.,-6.123233995737E-17,-0.)); +#79284 = DIRECTION('',(-6.123233995737E-17,1.,0.)); +#79285 = CYLINDRICAL_SURFACE('',#79286,0.1); +#79286 = AXIS2_PLACEMENT_3D('',#79287,#79288,#79289); +#79287 = CARTESIAN_POINT('',(-1.2,0.7,2.)); +#79288 = DIRECTION('',(1.,0.,0.)); +#79289 = DIRECTION('',(0.,0.,1.)); +#79290 = ADVANCED_FACE('',(#79291),#79302,.T.); +#79291 = FACE_BOUND('',#79292,.T.); +#79292 = EDGE_LOOP('',(#79293,#79300,#79301)); +#79293 = ORIENTED_EDGE('',*,*,#79294,.F.); +#79294 = EDGE_CURVE('',#79270,#78995,#79295,.T.); +#79295 = CIRCLE('',#79296,0.1); +#79296 = AXIS2_PLACEMENT_3D('',#79297,#79298,#79299); +#79297 = CARTESIAN_POINT('',(-1.2,0.7,2.)); +#79298 = DIRECTION('',(0.,-1.,0.)); +#79299 = DIRECTION('',(0.,0.,1.)); +#79300 = ORIENTED_EDGE('',*,*,#79279,.T.); +#79301 = ORIENTED_EDGE('',*,*,#79002,.F.); +#79302 = SPHERICAL_SURFACE('',#79303,0.1); +#79303 = AXIS2_PLACEMENT_3D('',#79304,#79305,#79306); +#79304 = CARTESIAN_POINT('',(-1.2,0.7,2.)); +#79305 = DIRECTION('',(-0.,-0.,-1.)); +#79306 = DIRECTION('',(-1.,0.,0.)); +#79307 = ADVANCED_FACE('',(#79308),#79325,.T.); +#79308 = FACE_BOUND('',#79309,.T.); +#79309 = EDGE_LOOP('',(#79310,#79316,#79317,#79318)); +#79310 = ORIENTED_EDGE('',*,*,#79311,.T.); +#79311 = EDGE_CURVE('',#79062,#79270,#79312,.T.); +#79312 = LINE('',#79313,#79314); +#79313 = CARTESIAN_POINT('',(-1.2,-0.7,2.1)); +#79314 = VECTOR('',#79315,1.); +#79315 = DIRECTION('',(0.,1.,0.)); +#79316 = ORIENTED_EDGE('',*,*,#79294,.T.); +#79317 = ORIENTED_EDGE('',*,*,#79018,.F.); +#79318 = ORIENTED_EDGE('',*,*,#79319,.F.); +#79319 = EDGE_CURVE('',#79062,#79019,#79320,.T.); +#79320 = CIRCLE('',#79321,0.1); +#79321 = AXIS2_PLACEMENT_3D('',#79322,#79323,#79324); +#79322 = CARTESIAN_POINT('',(-1.2,-0.7,2.)); +#79323 = DIRECTION('',(6.123233995737E-17,-1.,0.)); +#79324 = DIRECTION('',(-1.,-6.123233995737E-17,0.)); +#79325 = CYLINDRICAL_SURFACE('',#79326,0.1); +#79326 = AXIS2_PLACEMENT_3D('',#79327,#79328,#79329); +#79327 = CARTESIAN_POINT('',(-1.2,-0.7,2.)); +#79328 = DIRECTION('',(0.,1.,0.)); +#79329 = DIRECTION('',(0.,-0.,1.)); +#79330 = ADVANCED_FACE('',(#79331),#79336,.T.); +#79331 = FACE_BOUND('',#79332,.T.); +#79332 = EDGE_LOOP('',(#79333,#79334,#79335)); +#79333 = ORIENTED_EDGE('',*,*,#79069,.F.); +#79334 = ORIENTED_EDGE('',*,*,#79319,.T.); +#79335 = ORIENTED_EDGE('',*,*,#79041,.F.); +#79336 = SPHERICAL_SURFACE('',#79337,0.1); +#79337 = AXIS2_PLACEMENT_3D('',#79338,#79339,#79340); +#79338 = CARTESIAN_POINT('',(-1.2,-0.7,2.)); +#79339 = DIRECTION('',(-0.,-0.,-1.)); +#79340 = DIRECTION('',(0.,-1.,0.)); +#79341 = ADVANCED_FACE('',(#79342),#79352,.T.); +#79342 = FACE_BOUND('',#79343,.T.); +#79343 = EDGE_LOOP('',(#79344,#79345,#79346,#79347,#79348,#79349,#79350, + #79351)); +#79344 = ORIENTED_EDGE('',*,*,#79059,.F.); +#79345 = ORIENTED_EDGE('',*,*,#79111,.T.); +#79346 = ORIENTED_EDGE('',*,*,#79137,.T.); +#79347 = ORIENTED_EDGE('',*,*,#79179,.T.); +#79348 = ORIENTED_EDGE('',*,*,#79225,.T.); +#79349 = ORIENTED_EDGE('',*,*,#79254,.T.); +#79350 = ORIENTED_EDGE('',*,*,#79269,.F.); +#79351 = ORIENTED_EDGE('',*,*,#79311,.F.); +#79352 = PLANE('',#79353); +#79353 = AXIS2_PLACEMENT_3D('',#79354,#79355,#79356); +#79354 = CARTESIAN_POINT('',(0.,0.,2.1)); +#79355 = DIRECTION('',(0.,0.,1.)); +#79356 = DIRECTION('',(1.,0.,-0.)); +#79357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#79361)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#79358,#79359,#79360)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#79358 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#79359 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#79360 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#79361 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#79358, + 'distance_accuracy_value','confusion accuracy'); +#79362 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#79363,#79365); +#79363 = ( REPRESENTATION_RELATIONSHIP('','',#73968,#73945) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#79364) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#79364 = ITEM_DEFINED_TRANSFORMATION('','',#11,#73946); +#79365 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #79366); +#79366 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','=>[0:1:1:26]','',#73940, + #73963,$); +#79367 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#73965)); +#79368 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#79369,#79371); +#79369 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#79370) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#79370 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#79371 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #79372); +#79372 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','SW_VOL_DN1','',#5,#13558,$ + ); +#79373 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#79374,#79376); +#79374 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#79375) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#79375 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#79376 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #79377); +#79377 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','SW_MACRO4','',#5,#12150,$ + ); +#79378 = SHAPE_DEFINITION_REPRESENTATION(#79379,#79385); +#79379 = PRODUCT_DEFINITION_SHAPE('','',#79380); +#79380 = PRODUCT_DEFINITION('design','',#79381,#79384); +#79381 = PRODUCT_DEFINITION_FORMATION('','',#79382); +#79382 = PRODUCT('USB_C_Receptacle_HRO_TYPE-C-31-M-12', + 'USB_C_Receptacle_HRO_TYPE-C-31-M-12','',(#79383)); +#79383 = PRODUCT_CONTEXT('',#2,'mechanical'); +#79384 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#79385 = SHAPE_REPRESENTATION('',(#11,#79386),#79390); +#79386 = AXIS2_PLACEMENT_3D('',#79387,#79388,#79389); +#79387 = CARTESIAN_POINT('',(0.,0.,0.)); +#79388 = DIRECTION('',(0.,0.,1.)); +#79389 = DIRECTION('',(1.,0.,-0.)); +#79390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#79394)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#79391,#79392,#79393)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#79391 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#79392 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#79393 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#79394 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-07),#79391, + 'distance_accuracy_value','confusion accuracy'); +#79395 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#79396,#79398); +#79396 = ( REPRESENTATION_RELATIONSHIP('','',#79385,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#79397) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#79397 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#79398 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #79399); +#79399 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','J_USB1','',#5,#79380,$); +#79400 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#79382)); +#79401 = SHAPE_DEFINITION_REPRESENTATION(#79402,#79408); +#79402 = PRODUCT_DEFINITION_SHAPE('','',#79403); +#79403 = PRODUCT_DEFINITION('design','',#79404,#79407); +#79404 = PRODUCT_DEFINITION_FORMATION('','',#79405); +#79405 = PRODUCT('USB-C_SMD-TYPE-C-31-M-12','USB-C_SMD-TYPE-C-31-M-12', + '',(#79406)); +#79406 = PRODUCT_CONTEXT('',#2,'mechanical'); +#79407 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#79408 = SHAPE_REPRESENTATION('',(#11,#79409,#97106,#97322,#97874,#98288 + ,#98820,#99316,#99730,#100562,#101387,#101930,#102344,#102876, + #103372),#104741); +#79409 = MANIFOLD_SOLID_BREP('',#79410); +#79410 = CLOSED_SHELL('',(#79411,#79462,#79513,#79545,#79577,#79619, + #80225,#80537,#80961,#81019,#81060,#81101,#81141,#81181,#81239, + #81407,#81447,#81615,#81755,#81795,#81869,#81909,#81949,#81982, + #82006,#82080,#82104,#82137,#82283,#82459,#82686,#82913,#82937, + #82961,#82985,#83009,#83033,#83057,#83081,#83105,#83147,#83178, + #83211,#83276,#83341,#83449,#83523,#83556,#83587,#83620,#83685, + #83725,#83765,#83805,#83845,#83885,#83925,#83965,#84005,#84045, + #84085,#84118,#84142,#84175,#84199,#84223,#84247,#84271,#84295, + #84335,#84375,#84399,#84423,#84447,#84471,#84495,#84519,#84543, + #84567,#84600,#84624,#84657,#84681,#84714,#84738,#84771,#84795, + #84835,#84875,#84915,#84955,#84995,#85053,#85093,#85151,#85184, + #85217,#85241,#85274,#85305,#85345,#85403,#85443,#85501,#85525, + #85558,#85591,#85624,#85664,#85688,#85712,#85736,#85760,#85793, + #85835,#85868,#85910,#85934,#85958,#85982,#86006,#86030,#86048, + #86066,#86084,#86102,#86120,#86138,#86156,#86174,#86192,#86210, + #86228,#86246,#86264,#86282,#86300,#86318,#86336,#86354,#86372, + #86384,#86408,#86426,#86444,#86462,#86480,#86498,#86516,#86534, + #86552,#86570,#86588,#86606,#86624,#86642,#86660,#86678,#86696, + #86714,#86732,#86750,#86762,#86786,#86804,#86822,#86840,#86858, + #86876,#86894,#86912,#86930,#86948,#86966,#86984,#87002,#87020, + #87038,#87056,#87074,#87092,#87110,#87128,#87140,#87164,#87182, + #87200,#87218,#87236,#87254,#87272,#87290,#87308,#87326,#87344, + #87362,#87380,#87398,#87416,#87434,#87452,#87470,#87488,#87506, + #87518,#87542,#87560,#87578,#87596,#87614,#87632,#87650,#87668, + #87686,#87704,#87722,#87740,#87758,#87776,#87794,#87820,#87846, + #87864,#87882,#87900,#87918,#87936,#87954,#87972,#87990,#88008, + #88026,#88044,#88062,#88080,#88098,#88116,#88134,#88152,#88170, + #88188,#88206,#88224,#88242,#88260,#88278,#88296,#88314,#88332, + #88350,#88368,#88386,#88404,#88422,#88440,#88458,#88476,#88494, + #88506,#88530,#88548,#88566,#88584,#88602,#88620,#88638,#88664, + #88689,#88716,#88734,#88760,#88778,#88803,#88822,#88848,#88866, + #88891,#88910,#88936,#88954,#88979,#88997,#89023,#89049,#89073, + #89100,#89118,#89144,#89162,#89187,#89205,#89231,#89257,#89282, + #89308,#89334,#89359,#89384,#89410,#89436,#89461,#89485,#89511, + #89529,#89554,#89572,#89598,#89616,#89641,#89667,#89693,#89719, + #89736,#89760,#89778,#89796,#89814,#89832,#89850,#89868,#89880, + #89904,#89922,#89940,#89958,#89976,#89994,#90012,#90024,#90068, + #90112,#90147,#90172,#90196,#90221,#90249,#90352,#90376,#90394, + #90412,#90430,#90448,#90466,#90484,#90496,#90799,#90817,#90835, + #90877,#90908,#90926,#90944,#90963,#90994,#91018,#91042,#91061, + #91087,#91111,#91128,#91153,#91177,#91208,#91226,#91362,#91399, + #91426,#91470,#91490,#91508,#91524,#91542,#91558,#91577,#91596, + #91613,#91630,#91642,#91673,#91706,#91739,#91756,#91773,#91804, + #91837,#91861,#91887,#91904,#91935,#91968,#91992,#92018,#92035, + #92066,#92099,#92123,#92149,#92166,#92197,#92230,#92254,#92280, + #92297,#92328,#92361,#92385,#92411,#92428,#92459,#92492,#92516, + #92542,#92559,#92590,#92623,#92647,#92673,#92690,#92721,#92754, + #92778,#92804,#92821,#92852,#92885,#92909,#92935,#92952,#92983, + #93016,#93040,#93066,#93083,#93114,#93147,#93180,#93197,#93214, + #93226,#93238,#93250,#93262,#93274,#93286,#93298,#93310,#93322, + #93334,#93346,#93358,#93389,#93413,#93437,#93454,#93466,#93497, + #93521,#93545,#93562,#93574,#93605,#93629,#93653,#93670,#93682, + #93713,#93737,#93761,#93778,#93790,#93821,#93845,#93869,#93886, + #93898,#93929,#93953,#93977,#93994,#94006,#94037,#94061,#94085, + #94102,#94114,#94145,#94169,#94193,#94210,#94222,#94253,#94277, + #94301,#94318,#94330,#94361,#94385,#94409,#94426,#94438,#94469, + #94493,#94517,#94534,#94546,#94577,#94601,#94625,#94642,#94654, + #94685,#94709,#94733,#94750,#94762,#94793,#94817,#94841,#94858, + #94870,#94901,#94925,#94949,#94966,#94978,#95009,#95033,#95057, + #95074,#95086,#95117,#95141,#95165,#95189,#95213,#95237,#95261, + #95278,#95352,#95383,#95407,#95445,#95469,#95507,#95524,#95555, + #95579,#95603,#95677,#95744,#95831,#95862,#95936,#96010,#96034, + #96051,#96082,#96106,#96130,#96154,#96178,#96202,#96226,#96250, + #96274,#96298,#96322,#96339,#96359,#96390,#96440,#96514,#96588, + #96638,#96662,#96712,#96786,#96860,#96903,#96921,#96952,#96976, + #97000,#97024,#97048,#97065,#97079,#97093)); +#79411 = ADVANCED_FACE('',(#79412),#79450,.T.); +#79412 = FACE_BOUND('',#79413,.T.); +#79413 = EDGE_LOOP('',(#79414,#79425,#79434,#79443)); +#79414 = ORIENTED_EDGE('',*,*,#79415,.F.); +#79415 = EDGE_CURVE('',#79416,#79418,#79420,.T.); +#79416 = VERTEX_POINT('',#79417); +#79417 = CARTESIAN_POINT('',(3.14,-3.65,-0.45)); +#79418 = VERTEX_POINT('',#79419); +#79419 = CARTESIAN_POINT('',(2.64,-3.65,-0.45)); +#79420 = CIRCLE('',#79421,0.25); +#79421 = AXIS2_PLACEMENT_3D('',#79422,#79423,#79424); +#79422 = CARTESIAN_POINT('',(2.89,-3.65,-0.45)); +#79423 = DIRECTION('',(0.,-0.,1.)); +#79424 = DIRECTION('',(-1.,0.,0.)); +#79425 = ORIENTED_EDGE('',*,*,#79426,.T.); +#79426 = EDGE_CURVE('',#79416,#79427,#79429,.T.); +#79427 = VERTEX_POINT('',#79428); +#79428 = CARTESIAN_POINT('',(2.99,-3.65,-0.6)); +#79429 = CIRCLE('',#79430,0.15); +#79430 = AXIS2_PLACEMENT_3D('',#79431,#79432,#79433); +#79431 = CARTESIAN_POINT('',(2.99,-3.65,-0.45)); +#79432 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#79433 = DIRECTION('',(-1.,-1.224646799147E-16,-0.)); +#79434 = ORIENTED_EDGE('',*,*,#79435,.F.); +#79435 = EDGE_CURVE('',#79436,#79427,#79438,.T.); +#79436 = VERTEX_POINT('',#79437); +#79437 = CARTESIAN_POINT('',(2.79,-3.65,-0.6)); +#79438 = CIRCLE('',#79439,1.E-01); +#79439 = AXIS2_PLACEMENT_3D('',#79440,#79441,#79442); +#79440 = CARTESIAN_POINT('',(2.89,-3.65,-0.6)); +#79441 = DIRECTION('',(0.,0.,-1.)); +#79442 = DIRECTION('',(-1.,0.,0.)); +#79443 = ORIENTED_EDGE('',*,*,#79444,.F.); +#79444 = EDGE_CURVE('',#79418,#79436,#79445,.T.); +#79445 = CIRCLE('',#79446,0.15); +#79446 = AXIS2_PLACEMENT_3D('',#79447,#79448,#79449); +#79447 = CARTESIAN_POINT('',(2.79,-3.65,-0.45)); +#79448 = DIRECTION('',(0.,-1.,-0.)); +#79449 = DIRECTION('',(0.,0.,-1.)); +#79450 = SURFACE_OF_REVOLUTION('',#79451,#79459); +#79451 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#79452,#79453,#79454,#79455, + #79456,#79457,#79458),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#79452 = CARTESIAN_POINT('',(2.64,-3.65,-0.45)); +#79453 = CARTESIAN_POINT('',(2.64,-3.65,-0.48926990817)); +#79454 = CARTESIAN_POINT('',(2.652334152903,-3.65,-0.528536475106)); +#79455 = CARTESIAN_POINT('',(2.677021477554,-3.65,-0.562978522446)); +#79456 = CARTESIAN_POINT('',(2.711463524894,-3.65,-0.587665847097)); +#79457 = CARTESIAN_POINT('',(2.75073009183,-3.65,-0.6)); +#79458 = CARTESIAN_POINT('',(2.79,-3.65,-0.6)); +#79459 = AXIS1_PLACEMENT('',#79460,#79461); +#79460 = CARTESIAN_POINT('',(2.89,-3.65,-0.45)); +#79461 = DIRECTION('',(0.,0.,-1.)); +#79462 = ADVANCED_FACE('',(#79463),#79501,.T.); +#79463 = FACE_BOUND('',#79464,.T.); +#79464 = EDGE_LOOP('',(#79465,#79476,#79485,#79494)); +#79465 = ORIENTED_EDGE('',*,*,#79466,.F.); +#79466 = EDGE_CURVE('',#79467,#79469,#79471,.T.); +#79467 = VERTEX_POINT('',#79468); +#79468 = CARTESIAN_POINT('',(-2.64,-3.65,-0.45)); +#79469 = VERTEX_POINT('',#79470); +#79470 = CARTESIAN_POINT('',(-3.14,-3.65,-0.45)); +#79471 = CIRCLE('',#79472,0.25); +#79472 = AXIS2_PLACEMENT_3D('',#79473,#79474,#79475); +#79473 = CARTESIAN_POINT('',(-2.89,-3.65,-0.45)); +#79474 = DIRECTION('',(0.,-0.,1.)); +#79475 = DIRECTION('',(-1.,0.,0.)); +#79476 = ORIENTED_EDGE('',*,*,#79477,.T.); +#79477 = EDGE_CURVE('',#79467,#79478,#79480,.T.); +#79478 = VERTEX_POINT('',#79479); +#79479 = CARTESIAN_POINT('',(-2.79,-3.65,-0.6)); +#79480 = CIRCLE('',#79481,0.15); +#79481 = AXIS2_PLACEMENT_3D('',#79482,#79483,#79484); +#79482 = CARTESIAN_POINT('',(-2.79,-3.65,-0.45)); +#79483 = DIRECTION('',(-1.224646799147E-16,1.,0.)); +#79484 = DIRECTION('',(-1.,-1.224646799147E-16,-0.)); +#79485 = ORIENTED_EDGE('',*,*,#79486,.F.); +#79486 = EDGE_CURVE('',#79487,#79478,#79489,.T.); +#79487 = VERTEX_POINT('',#79488); +#79488 = CARTESIAN_POINT('',(-2.99,-3.65,-0.6)); +#79489 = CIRCLE('',#79490,0.1); +#79490 = AXIS2_PLACEMENT_3D('',#79491,#79492,#79493); +#79491 = CARTESIAN_POINT('',(-2.89,-3.65,-0.6)); +#79492 = DIRECTION('',(0.,0.,-1.)); +#79493 = DIRECTION('',(-1.,0.,0.)); +#79494 = ORIENTED_EDGE('',*,*,#79495,.F.); +#79495 = EDGE_CURVE('',#79469,#79487,#79496,.T.); +#79496 = CIRCLE('',#79497,0.15); +#79497 = AXIS2_PLACEMENT_3D('',#79498,#79499,#79500); +#79498 = CARTESIAN_POINT('',(-2.99,-3.65,-0.45)); +#79499 = DIRECTION('',(0.,-1.,-0.)); +#79500 = DIRECTION('',(0.,0.,-1.)); +#79501 = SURFACE_OF_REVOLUTION('',#79502,#79510); +#79502 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#79503,#79504,#79505,#79506, + #79507,#79508,#79509),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#79503 = CARTESIAN_POINT('',(-3.14,-3.65,-0.45)); +#79504 = CARTESIAN_POINT('',(-3.14,-3.65,-0.48926990817)); +#79505 = CARTESIAN_POINT('',(-3.127665847097,-3.65,-0.528536475106)); +#79506 = CARTESIAN_POINT('',(-3.102978522446,-3.65,-0.562978522446)); +#79507 = CARTESIAN_POINT('',(-3.068536475106,-3.65,-0.587665847097)); +#79508 = CARTESIAN_POINT('',(-3.02926990817,-3.65,-0.6)); +#79509 = CARTESIAN_POINT('',(-2.99,-3.65,-0.6)); +#79510 = AXIS1_PLACEMENT('',#79511,#79512); +#79511 = CARTESIAN_POINT('',(-2.89,-3.65,-0.45)); +#79512 = DIRECTION('',(0.,0.,-1.)); +#79513 = ADVANCED_FACE('',(#79514),#79540,.T.); +#79514 = FACE_BOUND('',#79515,.T.); +#79515 = EDGE_LOOP('',(#79516,#79517,#79525,#79534)); +#79516 = ORIENTED_EDGE('',*,*,#79466,.T.); +#79517 = ORIENTED_EDGE('',*,*,#79518,.T.); +#79518 = EDGE_CURVE('',#79469,#79519,#79521,.T.); +#79519 = VERTEX_POINT('',#79520); +#79520 = CARTESIAN_POINT('',(-3.14,-3.65,5.E-02)); +#79521 = LINE('',#79522,#79523); +#79522 = CARTESIAN_POINT('',(-3.14,-3.65,-0.6)); +#79523 = VECTOR('',#79524,1.); +#79524 = DIRECTION('',(-0.,-0.,1.)); +#79525 = ORIENTED_EDGE('',*,*,#79526,.T.); +#79526 = EDGE_CURVE('',#79519,#79527,#79529,.T.); +#79527 = VERTEX_POINT('',#79528); +#79528 = CARTESIAN_POINT('',(-2.64,-3.65,5.E-02)); +#79529 = CIRCLE('',#79530,0.25); +#79530 = AXIS2_PLACEMENT_3D('',#79531,#79532,#79533); +#79531 = CARTESIAN_POINT('',(-2.89,-3.65,5.E-02)); +#79532 = DIRECTION('',(0.,0.,-1.)); +#79533 = DIRECTION('',(-1.,0.,0.)); +#79534 = ORIENTED_EDGE('',*,*,#79535,.F.); +#79535 = EDGE_CURVE('',#79467,#79527,#79536,.T.); +#79536 = LINE('',#79537,#79538); +#79537 = CARTESIAN_POINT('',(-2.64,-3.65,-0.6)); +#79538 = VECTOR('',#79539,1.); +#79539 = DIRECTION('',(-0.,-0.,1.)); +#79540 = CYLINDRICAL_SURFACE('',#79541,0.25); +#79541 = AXIS2_PLACEMENT_3D('',#79542,#79543,#79544); +#79542 = CARTESIAN_POINT('',(-2.89,-3.65,-0.6)); +#79543 = DIRECTION('',(-0.,-0.,1.)); +#79544 = DIRECTION('',(1.,0.,0.)); +#79545 = ADVANCED_FACE('',(#79546),#79572,.T.); +#79546 = FACE_BOUND('',#79547,.T.); +#79547 = EDGE_LOOP('',(#79548,#79549,#79557,#79566)); +#79548 = ORIENTED_EDGE('',*,*,#79415,.T.); +#79549 = ORIENTED_EDGE('',*,*,#79550,.T.); +#79550 = EDGE_CURVE('',#79418,#79551,#79553,.T.); +#79551 = VERTEX_POINT('',#79552); +#79552 = CARTESIAN_POINT('',(2.64,-3.65,5.E-02)); +#79553 = LINE('',#79554,#79555); +#79554 = CARTESIAN_POINT('',(2.64,-3.65,-0.6)); +#79555 = VECTOR('',#79556,1.); +#79556 = DIRECTION('',(-0.,-0.,1.)); +#79557 = ORIENTED_EDGE('',*,*,#79558,.T.); +#79558 = EDGE_CURVE('',#79551,#79559,#79561,.T.); +#79559 = VERTEX_POINT('',#79560); +#79560 = CARTESIAN_POINT('',(3.14,-3.65,5.E-02)); +#79561 = CIRCLE('',#79562,0.25); +#79562 = AXIS2_PLACEMENT_3D('',#79563,#79564,#79565); +#79563 = CARTESIAN_POINT('',(2.89,-3.65,5.E-02)); +#79564 = DIRECTION('',(0.,0.,-1.)); +#79565 = DIRECTION('',(-1.,0.,0.)); +#79566 = ORIENTED_EDGE('',*,*,#79567,.F.); +#79567 = EDGE_CURVE('',#79416,#79559,#79568,.T.); +#79568 = LINE('',#79569,#79570); +#79569 = CARTESIAN_POINT('',(3.14,-3.65,-0.6)); +#79570 = VECTOR('',#79571,1.); +#79571 = DIRECTION('',(-0.,-0.,1.)); +#79572 = CYLINDRICAL_SURFACE('',#79573,0.25); +#79573 = AXIS2_PLACEMENT_3D('',#79574,#79575,#79576); +#79574 = CARTESIAN_POINT('',(2.89,-3.65,-0.6)); +#79575 = DIRECTION('',(-0.,-0.,1.)); +#79576 = DIRECTION('',(1.,0.,0.)); +#79577 = ADVANCED_FACE('',(#79578),#79614,.T.); +#79578 = FACE_BOUND('',#79579,.T.); +#79579 = EDGE_LOOP('',(#79580,#79591,#79599,#79608)); +#79580 = ORIENTED_EDGE('',*,*,#79581,.F.); +#79581 = EDGE_CURVE('',#79582,#79584,#79586,.T.); +#79582 = VERTEX_POINT('',#79583); +#79583 = CARTESIAN_POINT('',(-2.139365466512,-4.2,1.964682733256)); +#79584 = VERTEX_POINT('',#79585); +#79585 = CARTESIAN_POINT('',(-2.158889207716,-4.2,1.971905035185)); +#79586 = CIRCLE('',#79587,3.E-02); +#79587 = AXIS2_PLACEMENT_3D('',#79588,#79589,#79590); +#79588 = CARTESIAN_POINT('',(-2.139365466512,-4.2,1.994682733256)); +#79589 = DIRECTION('',(0.,1.,0.)); +#79590 = DIRECTION('',(0.,-0.,1.)); +#79591 = ORIENTED_EDGE('',*,*,#79592,.T.); +#79592 = EDGE_CURVE('',#79582,#79593,#79595,.T.); +#79593 = VERTEX_POINT('',#79594); +#79594 = CARTESIAN_POINT('',(-2.139365466512,-4.4,1.964682733256)); +#79595 = LINE('',#79596,#79597); +#79596 = CARTESIAN_POINT('',(-2.139365466512,-4.7,1.964682733256)); +#79597 = VECTOR('',#79598,1.); +#79598 = DIRECTION('',(0.,-1.,0.)); +#79599 = ORIENTED_EDGE('',*,*,#79600,.T.); +#79600 = EDGE_CURVE('',#79593,#79601,#79603,.T.); +#79601 = VERTEX_POINT('',#79602); +#79602 = CARTESIAN_POINT('',(-2.158889207716,-4.4,1.971905035185)); +#79603 = CIRCLE('',#79604,3.E-02); +#79604 = AXIS2_PLACEMENT_3D('',#79605,#79606,#79607); +#79605 = CARTESIAN_POINT('',(-2.139365466512,-4.4,1.994682733256)); +#79606 = DIRECTION('',(0.,1.,0.)); +#79607 = DIRECTION('',(0.,-0.,1.)); +#79608 = ORIENTED_EDGE('',*,*,#79609,.F.); +#79609 = EDGE_CURVE('',#79584,#79601,#79610,.T.); +#79610 = LINE('',#79611,#79612); +#79611 = CARTESIAN_POINT('',(-2.158889207716,-4.4,1.971905035185)); +#79612 = VECTOR('',#79613,1.); +#79613 = DIRECTION('',(-0.,-1.,-0.)); +#79614 = CYLINDRICAL_SURFACE('',#79615,3.E-02); +#79615 = AXIS2_PLACEMENT_3D('',#79616,#79617,#79618); +#79616 = CARTESIAN_POINT('',(-2.139365466512,-4.7,1.994682733256)); +#79617 = DIRECTION('',(0.,-1.,0.)); +#79618 = DIRECTION('',(0.,0.,-1.)); +#79619 = ADVANCED_FACE('',(#79620,#79686,#79820,#79894,#79992,#80170), + #80220,.T.); +#79620 = FACE_BOUND('',#79621,.T.); +#79621 = EDGE_LOOP('',(#79622,#79632,#79640,#79648,#79656,#79664,#79672, + #79680)); +#79622 = ORIENTED_EDGE('',*,*,#79623,.T.); +#79623 = EDGE_CURVE('',#79624,#79626,#79628,.T.); +#79624 = VERTEX_POINT('',#79625); +#79625 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,5.E-02)); +#79626 = VERTEX_POINT('',#79627); +#79627 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,5.E-02)); +#79628 = LINE('',#79629,#79630); +#79629 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,5.E-02)); +#79630 = VECTOR('',#79631,1.); +#79631 = DIRECTION('',(1.,0.,0.)); +#79632 = ORIENTED_EDGE('',*,*,#79633,.T.); +#79633 = EDGE_CURVE('',#79626,#79634,#79636,.T.); +#79634 = VERTEX_POINT('',#79635); +#79635 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,5.E-02)); +#79636 = LINE('',#79637,#79638); +#79637 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,5.E-02)); +#79638 = VECTOR('',#79639,1.); +#79639 = DIRECTION('',(0.363542485653,0.931577619485,0.)); +#79640 = ORIENTED_EDGE('',*,*,#79641,.T.); +#79641 = EDGE_CURVE('',#79634,#79642,#79644,.T.); +#79642 = VERTEX_POINT('',#79643); +#79643 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,5.E-02) + ); +#79644 = LINE('',#79645,#79646); +#79645 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,5.E-02)); +#79646 = VECTOR('',#79647,1.); +#79647 = DIRECTION('',(-1.,0.,0.)); +#79648 = ORIENTED_EDGE('',*,*,#79649,.T.); +#79649 = EDGE_CURVE('',#79642,#79650,#79652,.T.); +#79650 = VERTEX_POINT('',#79651); +#79651 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,5.E-02)); +#79652 = LINE('',#79653,#79654); +#79653 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,5.E-02) + ); +#79654 = VECTOR('',#79655,1.); +#79655 = DIRECTION('',(-0.339330377275,-0.940667260544,0.)); +#79656 = ORIENTED_EDGE('',*,*,#79657,.T.); +#79657 = EDGE_CURVE('',#79650,#79658,#79660,.T.); +#79658 = VERTEX_POINT('',#79659); +#79659 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,5.E-02)); +#79660 = LINE('',#79661,#79662); +#79661 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,5.E-02)); +#79662 = VECTOR('',#79663,1.); +#79663 = DIRECTION('',(-1.,0.,0.)); +#79664 = ORIENTED_EDGE('',*,*,#79665,.T.); +#79665 = EDGE_CURVE('',#79658,#79666,#79668,.T.); +#79666 = VERTEX_POINT('',#79667); +#79667 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,5.E-02) + ); +#79668 = LINE('',#79669,#79670); +#79669 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,5.E-02)); +#79670 = VECTOR('',#79671,1.); +#79671 = DIRECTION('',(-0.322202485606,0.946670776072,0.)); +#79672 = ORIENTED_EDGE('',*,*,#79673,.T.); +#79673 = EDGE_CURVE('',#79666,#79674,#79676,.T.); +#79674 = VERTEX_POINT('',#79675); +#79675 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,5.E-02) + ); +#79676 = LINE('',#79677,#79678); +#79677 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,5.E-02) + ); +#79678 = VECTOR('',#79679,1.); +#79679 = DIRECTION('',(-1.,0.,0.)); +#79680 = ORIENTED_EDGE('',*,*,#79681,.T.); +#79681 = EDGE_CURVE('',#79674,#79624,#79682,.T.); +#79682 = LINE('',#79683,#79684); +#79683 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,5.E-02) + ); +#79684 = VECTOR('',#79685,1.); +#79685 = DIRECTION('',(0.353622392329,-0.93538826358,0.)); +#79686 = FACE_BOUND('',#79687,.T.); +#79687 = EDGE_LOOP('',(#79688,#79699,#79707,#79715,#79723,#79731,#79739, + #79748,#79756,#79765,#79773,#79781,#79789,#79797,#79805,#79814)); +#79688 = ORIENTED_EDGE('',*,*,#79689,.T.); +#79689 = EDGE_CURVE('',#79690,#79692,#79694,.T.); +#79690 = VERTEX_POINT('',#79691); +#79691 = CARTESIAN_POINT('',(1.87,-1.1,5.E-02)); +#79692 = VERTEX_POINT('',#79693); +#79693 = CARTESIAN_POINT('',(2.2,-1.43,5.E-02)); +#79694 = CIRCLE('',#79695,0.33); +#79695 = AXIS2_PLACEMENT_3D('',#79696,#79697,#79698); +#79696 = CARTESIAN_POINT('',(2.2,-1.1,5.E-02)); +#79697 = DIRECTION('',(0.,-0.,1.)); +#79698 = DIRECTION('',(-1.,0.,0.)); +#79699 = ORIENTED_EDGE('',*,*,#79700,.T.); +#79700 = EDGE_CURVE('',#79692,#79701,#79703,.T.); +#79701 = VERTEX_POINT('',#79702); +#79702 = CARTESIAN_POINT('',(3.47,-1.43,5.E-02)); +#79703 = LINE('',#79704,#79705); +#79704 = CARTESIAN_POINT('',(3.47,-1.43,5.E-02)); +#79705 = VECTOR('',#79706,1.); +#79706 = DIRECTION('',(1.,4.480174266469E-17,-0.)); +#79707 = ORIENTED_EDGE('',*,*,#79708,.T.); +#79708 = EDGE_CURVE('',#79701,#79709,#79711,.T.); +#79709 = VERTEX_POINT('',#79710); +#79710 = CARTESIAN_POINT('',(3.47,-3.17,5.E-02)); +#79711 = LINE('',#79712,#79713); +#79712 = CARTESIAN_POINT('',(3.47,2.6,5.E-02)); +#79713 = VECTOR('',#79714,1.); +#79714 = DIRECTION('',(-0.,-1.,-0.)); +#79715 = ORIENTED_EDGE('',*,*,#79716,.T.); +#79716 = EDGE_CURVE('',#79709,#79717,#79719,.T.); +#79717 = VERTEX_POINT('',#79718); +#79718 = CARTESIAN_POINT('',(-3.47,-3.17,5.E-02)); +#79719 = LINE('',#79720,#79721); +#79720 = CARTESIAN_POINT('',(-3.47,-3.17,5.E-02)); +#79721 = VECTOR('',#79722,1.); +#79722 = DIRECTION('',(-1.,-0.,-0.)); +#79723 = ORIENTED_EDGE('',*,*,#79724,.F.); +#79724 = EDGE_CURVE('',#79725,#79717,#79727,.T.); +#79725 = VERTEX_POINT('',#79726); +#79726 = CARTESIAN_POINT('',(-3.47,-1.43,5.E-02)); +#79727 = LINE('',#79728,#79729); +#79728 = CARTESIAN_POINT('',(-3.47,2.6,5.E-02)); +#79729 = VECTOR('',#79730,1.); +#79730 = DIRECTION('',(-0.,-1.,-0.)); +#79731 = ORIENTED_EDGE('',*,*,#79732,.T.); +#79732 = EDGE_CURVE('',#79725,#79733,#79735,.T.); +#79733 = VERTEX_POINT('',#79734); +#79734 = CARTESIAN_POINT('',(-2.2,-1.43,5.E-02)); +#79735 = LINE('',#79736,#79737); +#79736 = CARTESIAN_POINT('',(-2.2,-1.43,5.E-02)); +#79737 = VECTOR('',#79738,1.); +#79738 = DIRECTION('',(1.,-3.136121986528E-16,-0.)); +#79739 = ORIENTED_EDGE('',*,*,#79740,.T.); +#79740 = EDGE_CURVE('',#79733,#79741,#79743,.T.); +#79741 = VERTEX_POINT('',#79742); +#79742 = CARTESIAN_POINT('',(-1.87,-1.1,5.E-02)); +#79743 = CIRCLE('',#79744,0.33); +#79744 = AXIS2_PLACEMENT_3D('',#79745,#79746,#79747); +#79745 = CARTESIAN_POINT('',(-2.2,-1.1,5.E-02)); +#79746 = DIRECTION('',(0.,-0.,1.)); +#79747 = DIRECTION('',(-1.,0.,0.)); +#79748 = ORIENTED_EDGE('',*,*,#79749,.T.); +#79749 = EDGE_CURVE('',#79741,#79750,#79752,.T.); +#79750 = VERTEX_POINT('',#79751); +#79751 = CARTESIAN_POINT('',(-1.87,0.5,5.E-02)); +#79752 = LINE('',#79753,#79754); +#79753 = CARTESIAN_POINT('',(-1.87,0.5,5.E-02)); +#79754 = VECTOR('',#79755,1.); +#79755 = DIRECTION('',(5.421010862428E-16,1.,-0.)); +#79756 = ORIENTED_EDGE('',*,*,#79757,.T.); +#79757 = EDGE_CURVE('',#79750,#79758,#79760,.T.); +#79758 = VERTEX_POINT('',#79759); +#79759 = CARTESIAN_POINT('',(-2.2,0.83,5.E-02)); +#79760 = CIRCLE('',#79761,0.33); +#79761 = AXIS2_PLACEMENT_3D('',#79762,#79763,#79764); +#79762 = CARTESIAN_POINT('',(-2.2,0.5,5.E-02)); +#79763 = DIRECTION('',(0.,-0.,1.)); +#79764 = DIRECTION('',(-1.,0.,0.)); +#79765 = ORIENTED_EDGE('',*,*,#79766,.T.); +#79766 = EDGE_CURVE('',#79758,#79767,#79769,.T.); +#79767 = VERTEX_POINT('',#79768); +#79768 = CARTESIAN_POINT('',(-3.47,0.83,5.E-02)); +#79769 = LINE('',#79770,#79771); +#79770 = CARTESIAN_POINT('',(-3.47,0.83,5.E-02)); +#79771 = VECTOR('',#79772,1.); +#79772 = DIRECTION('',(-1.,-0.,-0.)); +#79773 = ORIENTED_EDGE('',*,*,#79774,.F.); +#79774 = EDGE_CURVE('',#79775,#79767,#79777,.T.); +#79775 = VERTEX_POINT('',#79776); +#79776 = CARTESIAN_POINT('',(-3.47,2.57,5.E-02)); +#79777 = LINE('',#79778,#79779); +#79778 = CARTESIAN_POINT('',(-3.47,2.6,5.E-02)); +#79779 = VECTOR('',#79780,1.); +#79780 = DIRECTION('',(-0.,-1.,-0.)); +#79781 = ORIENTED_EDGE('',*,*,#79782,.T.); +#79782 = EDGE_CURVE('',#79775,#79783,#79785,.T.); +#79783 = VERTEX_POINT('',#79784); +#79784 = CARTESIAN_POINT('',(3.47,2.57,5.E-02)); +#79785 = LINE('',#79786,#79787); +#79786 = CARTESIAN_POINT('',(3.47,2.57,5.E-02)); +#79787 = VECTOR('',#79788,1.); +#79788 = DIRECTION('',(1.,-0.,-0.)); +#79789 = ORIENTED_EDGE('',*,*,#79790,.T.); +#79790 = EDGE_CURVE('',#79783,#79791,#79793,.T.); +#79791 = VERTEX_POINT('',#79792); +#79792 = CARTESIAN_POINT('',(3.47,0.83,5.E-02)); +#79793 = LINE('',#79794,#79795); +#79794 = CARTESIAN_POINT('',(3.47,2.6,5.E-02)); +#79795 = VECTOR('',#79796,1.); +#79796 = DIRECTION('',(-0.,-1.,-0.)); +#79797 = ORIENTED_EDGE('',*,*,#79798,.T.); +#79798 = EDGE_CURVE('',#79791,#79799,#79801,.T.); +#79799 = VERTEX_POINT('',#79800); +#79800 = CARTESIAN_POINT('',(2.2,0.83,5.E-02)); +#79801 = LINE('',#79802,#79803); +#79802 = CARTESIAN_POINT('',(2.2,0.83,5.E-02)); +#79803 = VECTOR('',#79804,1.); +#79804 = DIRECTION('',(-1.,-0.,-0.)); +#79805 = ORIENTED_EDGE('',*,*,#79806,.T.); +#79806 = EDGE_CURVE('',#79799,#79807,#79809,.T.); +#79807 = VERTEX_POINT('',#79808); +#79808 = CARTESIAN_POINT('',(1.87,0.5,5.E-02)); +#79809 = CIRCLE('',#79810,0.33); +#79810 = AXIS2_PLACEMENT_3D('',#79811,#79812,#79813); +#79811 = CARTESIAN_POINT('',(2.2,0.5,5.E-02)); +#79812 = DIRECTION('',(0.,-0.,1.)); +#79813 = DIRECTION('',(-1.,1.609875953085E-14,0.)); +#79814 = ORIENTED_EDGE('',*,*,#79815,.T.); +#79815 = EDGE_CURVE('',#79807,#79690,#79816,.T.); +#79816 = LINE('',#79817,#79818); +#79817 = CARTESIAN_POINT('',(1.87,-1.1,5.E-02)); +#79818 = VECTOR('',#79819,1.); +#79819 = DIRECTION('',(0.,-1.,-0.)); +#79820 = FACE_BOUND('',#79821,.T.); +#79821 = EDGE_LOOP('',(#79822,#79848,#79856,#79864,#79872)); +#79822 = ORIENTED_EDGE('',*,*,#79823,.T.); +#79823 = EDGE_CURVE('',#79824,#79826,#79828,.T.); +#79824 = VERTEX_POINT('',#79825); +#79825 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,5.E-02)); +#79826 = VERTEX_POINT('',#79827); +#79827 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,5.E-02)); +#79828 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#79829,#79830,#79831,#79832, + #79833,#79834,#79835,#79836,#79837,#79838,#79839,#79840,#79841, + #79842,#79843,#79844,#79845,#79846,#79847),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.807022544602E-02, + 0.133430431124,0.196150441495,0.257127947319,0.316867312535, + 0.3761731907,0.435947660585,0.496523923289,0.557455399094, + 0.617678272287,0.67793640363,0.738799415387,0.800944863813, + 0.864811629662,0.931023231107,1.),.UNSPECIFIED.); +#79829 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,5.E-02)); +#79830 = CARTESIAN_POINT('',(0.565209148654,-0.277844238657,5.E-02)); +#79831 = CARTESIAN_POINT('',(0.564815313669,-0.259331905309,5.E-02)); +#79832 = CARTESIAN_POINT('',(0.561183126496,-0.232321018061,5.E-02)); +#79833 = CARTESIAN_POINT('',(0.555456825467,-0.206693842473,5.E-02)); +#79834 = CARTESIAN_POINT('',(0.547165726226,-0.182597767781,5.E-02)); +#79835 = CARTESIAN_POINT('',(0.536846100542,-0.159807689544,5.E-02)); +#79836 = CARTESIAN_POINT('',(0.523792662075,-0.138655204787,5.E-02)); +#79837 = CARTESIAN_POINT('',(0.508625052549,-0.118836424073,5.E-02)); +#79838 = CARTESIAN_POINT('',(0.491170576473,-0.100667149091,5.E-02)); +#79839 = CARTESIAN_POINT('',(0.471871932529,-8.440396103474E-02,5.E-02) + ); +#79840 = CARTESIAN_POINT('',(0.451234267029,-6.99406626739E-02,5.E-02)); +#79841 = CARTESIAN_POINT('',(0.429081744583,-5.792347100819E-02,5.E-02) + ); +#79842 = CARTESIAN_POINT('',(0.405603172368,-4.810488503672E-02,5.E-02) + ); +#79843 = CARTESIAN_POINT('',(0.380839721541,-4.030950634431E-02,5.E-02) + ); +#79844 = CARTESIAN_POINT('',(0.354684041292,-3.500201771844E-02,5.E-02) + ); +#79845 = CARTESIAN_POINT('',(0.327255011408,-3.151280824727E-02,5.E-02) + ); +#79846 = CARTESIAN_POINT('',(0.308497954616,-3.117344430644E-02,5.E-02) + ); +#79847 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,5.E-02)); +#79848 = ORIENTED_EDGE('',*,*,#79849,.T.); +#79849 = EDGE_CURVE('',#79826,#79850,#79852,.T.); +#79850 = VERTEX_POINT('',#79851); +#79851 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,5.E-02) + ); +#79852 = LINE('',#79853,#79854); +#79853 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,5.E-02)); +#79854 = VECTOR('',#79855,1.); +#79855 = DIRECTION('',(-1.,0.,0.)); +#79856 = ORIENTED_EDGE('',*,*,#79857,.T.); +#79857 = EDGE_CURVE('',#79850,#79858,#79860,.T.); +#79858 = VERTEX_POINT('',#79859); +#79859 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,5.E-02)); +#79860 = LINE('',#79861,#79862); +#79861 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,5.E-02) + ); +#79862 = VECTOR('',#79863,1.); +#79863 = DIRECTION('',(0.,-1.,0.)); +#79864 = ORIENTED_EDGE('',*,*,#79865,.T.); +#79865 = EDGE_CURVE('',#79858,#79866,#79868,.T.); +#79866 = VERTEX_POINT('',#79867); +#79867 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,5.E-02)); +#79868 = LINE('',#79869,#79870); +#79869 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,5.E-02)); +#79870 = VECTOR('',#79871,1.); +#79871 = DIRECTION('',(1.,0.,0.)); +#79872 = ORIENTED_EDGE('',*,*,#79873,.T.); +#79873 = EDGE_CURVE('',#79866,#79824,#79874,.T.); +#79874 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#79875,#79876,#79877,#79878, + #79879,#79880,#79881,#79882,#79883,#79884,#79885,#79886,#79887, + #79888,#79889,#79890,#79891,#79892,#79893),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.862671829589E-02, + 0.134557720485,0.198315264547,0.26077281776,0.32197822457, + 0.382585954504,0.443397729587,0.504989681879,0.566066157504, + 0.625954254942,0.685393604693,0.744932810825,0.805428487954, + 0.867644868743,0.932312181659,1.),.UNSPECIFIED.); +#79875 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,5.E-02)); +#79876 = CARTESIAN_POINT('',(0.313258318012,-0.530795494298,5.E-02)); +#79877 = CARTESIAN_POINT('',(0.331269297503,-0.530393944249,5.E-02)); +#79878 = CARTESIAN_POINT('',(0.357681753256,-0.527345191168,5.E-02)); +#79879 = CARTESIAN_POINT('',(0.382878284555,-0.522050730865,5.E-02)); +#79880 = CARTESIAN_POINT('',(0.406936372634,-0.514840970366,5.E-02)); +#79881 = CARTESIAN_POINT('',(0.429840384989,-0.505589527854,5.E-02)); +#79882 = CARTESIAN_POINT('',(0.451498585534,-0.494172472306,5.E-02)); +#79883 = CARTESIAN_POINT('',(0.471974356772,-0.480662672398,5.E-02)); +#79884 = CARTESIAN_POINT('',(0.491123966552,-0.465231522785,5.E-02)); +#79885 = CARTESIAN_POINT('',(0.508569906058,-0.448058092302,5.E-02)); +#79886 = CARTESIAN_POINT('',(0.523804943871,-0.429267229268,5.E-02)); +#79887 = CARTESIAN_POINT('',(0.536806448629,-0.409094778601,5.E-02)); +#79888 = CARTESIAN_POINT('',(0.547145542501,-0.387357818882,5.E-02)); +#79889 = CARTESIAN_POINT('',(0.555459027441,-0.364376420639,5.E-02)); +#79890 = CARTESIAN_POINT('',(0.56117501854,-0.339914393727,5.E-02)); +#79891 = CARTESIAN_POINT('',(0.56482309372,-0.314075475623,5.E-02)); +#79892 = CARTESIAN_POINT('',(0.565211454029,-0.296352248017,5.E-02)); +#79893 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,5.E-02)); +#79894 = FACE_BOUND('',#79895,.T.); +#79895 = EDGE_LOOP('',(#79896,#79906,#79914,#79922,#79930,#79938,#79946, + #79954,#79962,#79970,#79978,#79986)); +#79896 = ORIENTED_EDGE('',*,*,#79897,.T.); +#79897 = EDGE_CURVE('',#79898,#79900,#79902,.T.); +#79898 = VERTEX_POINT('',#79899); +#79899 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,5.E-02) + ); +#79900 = VERTEX_POINT('',#79901); +#79901 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 5.E-02)); +#79902 = LINE('',#79903,#79904); +#79903 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,5.E-02) + ); +#79904 = VECTOR('',#79905,1.); +#79905 = DIRECTION('',(1.,0.,0.)); +#79906 = ORIENTED_EDGE('',*,*,#79907,.T.); +#79907 = EDGE_CURVE('',#79900,#79908,#79910,.T.); +#79908 = VERTEX_POINT('',#79909); +#79909 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 5.E-02)); +#79910 = LINE('',#79911,#79912); +#79911 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 5.E-02)); +#79912 = VECTOR('',#79913,1.); +#79913 = DIRECTION('',(0.,1.,0.)); +#79914 = ORIENTED_EDGE('',*,*,#79915,.T.); +#79915 = EDGE_CURVE('',#79908,#79916,#79918,.T.); +#79916 = VERTEX_POINT('',#79917); +#79917 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,5.E-02) + ); +#79918 = LINE('',#79919,#79920); +#79919 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 5.E-02)); +#79920 = VECTOR('',#79921,1.); +#79921 = DIRECTION('',(-1.,0.,0.)); +#79922 = ORIENTED_EDGE('',*,*,#79923,.T.); +#79923 = EDGE_CURVE('',#79916,#79924,#79926,.T.); +#79924 = VERTEX_POINT('',#79925); +#79925 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,5.E-02)); +#79926 = LINE('',#79927,#79928); +#79927 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,5.E-02) + ); +#79928 = VECTOR('',#79929,1.); +#79929 = DIRECTION('',(0.,-1.,0.)); +#79930 = ORIENTED_EDGE('',*,*,#79931,.T.); +#79931 = EDGE_CURVE('',#79924,#79932,#79934,.T.); +#79932 = VERTEX_POINT('',#79933); +#79933 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,5.E-02)); +#79934 = LINE('',#79935,#79936); +#79935 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,5.E-02)); +#79936 = VECTOR('',#79937,1.); +#79937 = DIRECTION('',(1.,0.,0.)); +#79938 = ORIENTED_EDGE('',*,*,#79939,.T.); +#79939 = EDGE_CURVE('',#79932,#79940,#79942,.T.); +#79940 = VERTEX_POINT('',#79941); +#79941 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,5.E-02)); +#79942 = LINE('',#79943,#79944); +#79943 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,5.E-02)); +#79944 = VECTOR('',#79945,1.); +#79945 = DIRECTION('',(0.,1.,0.)); +#79946 = ORIENTED_EDGE('',*,*,#79947,.T.); +#79947 = EDGE_CURVE('',#79940,#79948,#79950,.T.); +#79948 = VERTEX_POINT('',#79949); +#79949 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,5.E-02)); +#79950 = LINE('',#79951,#79952); +#79951 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,5.E-02)); +#79952 = VECTOR('',#79953,1.); +#79953 = DIRECTION('',(-1.,0.,0.)); +#79954 = ORIENTED_EDGE('',*,*,#79955,.T.); +#79955 = EDGE_CURVE('',#79948,#79956,#79958,.T.); +#79956 = VERTEX_POINT('',#79957); +#79957 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,5.E-02)); +#79958 = LINE('',#79959,#79960); +#79959 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,5.E-02)); +#79960 = VECTOR('',#79961,1.); +#79961 = DIRECTION('',(0.,1.,0.)); +#79962 = ORIENTED_EDGE('',*,*,#79963,.T.); +#79963 = EDGE_CURVE('',#79956,#79964,#79966,.T.); +#79964 = VERTEX_POINT('',#79965); +#79965 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,5.E-02) + ); +#79966 = LINE('',#79967,#79968); +#79967 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,5.E-02)); +#79968 = VECTOR('',#79969,1.); +#79969 = DIRECTION('',(1.,0.,0.)); +#79970 = ORIENTED_EDGE('',*,*,#79971,.T.); +#79971 = EDGE_CURVE('',#79964,#79972,#79974,.T.); +#79972 = VERTEX_POINT('',#79973); +#79973 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,5.E-02) + ); +#79974 = LINE('',#79975,#79976); +#79975 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,5.E-02) + ); +#79976 = VECTOR('',#79977,1.); +#79977 = DIRECTION('',(0.,1.,0.)); +#79978 = ORIENTED_EDGE('',*,*,#79979,.T.); +#79979 = EDGE_CURVE('',#79972,#79980,#79982,.T.); +#79980 = VERTEX_POINT('',#79981); +#79981 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,5.E-02)); +#79982 = LINE('',#79983,#79984); +#79983 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,5.E-02) + ); +#79984 = VECTOR('',#79985,1.); +#79985 = DIRECTION('',(-1.,0.,0.)); +#79986 = ORIENTED_EDGE('',*,*,#79987,.T.); +#79987 = EDGE_CURVE('',#79980,#79898,#79988,.T.); +#79988 = LINE('',#79989,#79990); +#79989 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,5.E-02)); +#79990 = VECTOR('',#79991,1.); +#79991 = DIRECTION('',(0.,1.,0.)); +#79992 = FACE_BOUND('',#79993,.T.); +#79993 = EDGE_LOOP('',(#79994,#80012,#80020,#80036,#80060,#80084,#80100, + #80108,#80124,#80148)); +#79994 = ORIENTED_EDGE('',*,*,#79995,.T.); +#79995 = EDGE_CURVE('',#79996,#79998,#80000,.T.); +#79996 = VERTEX_POINT('',#79997); +#79997 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,5.E-02) + ); +#79998 = VERTEX_POINT('',#79999); +#79999 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,5.E-02)); +#80000 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80001,#80002,#80003,#80004, + #80005,#80006,#80007,#80008,#80009,#80010,#80011),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.135294604763,0.266765657925, + 0.394816018836,0.520051654434,0.642175702971,0.762651820558, + 0.881834004381,1.),.UNSPECIFIED.); +#80001 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,5.E-02) + ); +#80002 = CARTESIAN_POINT('',(-0.422740486301,-7.98600497088E-02,5.E-02) + ); +#80003 = CARTESIAN_POINT('',(-0.410835697053,-8.001635000442E-02,5.E-02) + ); +#80004 = CARTESIAN_POINT('',(-0.393279756133,-8.162033747885E-02,5.E-02) + ); +#80005 = CARTESIAN_POINT('',(-0.376274641742,-8.403444713637E-02,5.E-02) + ); +#80006 = CARTESIAN_POINT('',(-0.359894266315,-8.758780449734E-02,5.E-02) + ); +#80007 = CARTESIAN_POINT('',(-0.344082469326,-9.203580592234E-02,5.E-02) + ); +#80008 = CARTESIAN_POINT('',(-0.328928892834,-9.762283647603E-02,5.E-02) + ); +#80009 = CARTESIAN_POINT('',(-0.314271613607,-0.104004380669,5.E-02)); +#80010 = CARTESIAN_POINT('',(-0.305039757989,-0.109204197468,5.E-02)); +#80011 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,5.E-02)); +#80012 = ORIENTED_EDGE('',*,*,#80013,.T.); +#80013 = EDGE_CURVE('',#79998,#80014,#80016,.T.); +#80014 = VERTEX_POINT('',#80015); +#80015 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,5.E-02) + ); +#80016 = LINE('',#80017,#80018); +#80017 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,5.E-02)); +#80018 = VECTOR('',#80019,1.); +#80019 = DIRECTION('',(0.,1.,0.)); +#80020 = ORIENTED_EDGE('',*,*,#80021,.T.); +#80021 = EDGE_CURVE('',#80014,#80022,#80024,.T.); +#80022 = VERTEX_POINT('',#80023); +#80023 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,5.E-02) + ); +#80024 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80025,#80026,#80027,#80028, + #80029,#80030,#80031,#80032,#80033,#80034,#80035),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.112448389909,0.226527675213, + 0.344401949326,0.465864972487,0.591659449352,0.722168487025, + 0.858606387555,1.),.UNSPECIFIED.); +#80025 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,5.E-02) + ); +#80026 = CARTESIAN_POINT('',(-0.305135288312,-5.432530094161E-02,5.E-02) + ); +#80027 = CARTESIAN_POINT('',(-0.314586725099,-4.910849264396E-02,5.E-02) + ); +#80028 = CARTESIAN_POINT('',(-0.329701557341,-4.267144758787E-02,5.E-02) + ); +#80029 = CARTESIAN_POINT('',(-0.345606023802,-3.711919328272E-02,5.E-02) + ); +#80030 = CARTESIAN_POINT('',(-0.362439330042,-3.269176850204E-02,5.E-02) + ); +#80031 = CARTESIAN_POINT('',(-0.380089573199,-2.913356062749E-02,5.E-02) + ); +#80032 = CARTESIAN_POINT('',(-0.398650277816,-2.672345893411E-02,5.E-02) + ); +#80033 = CARTESIAN_POINT('',(-0.418047912282,-2.51369674284E-02,5.E-02) + ); +#80034 = CARTESIAN_POINT('',(-0.43128381562,-2.49817325598E-02,5.E-02)); +#80035 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,5.E-02) + ); +#80036 = ORIENTED_EDGE('',*,*,#80037,.T.); +#80037 = EDGE_CURVE('',#80022,#80038,#80040,.T.); +#80038 = VERTEX_POINT('',#80039); +#80039 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,5.E-02)); +#80040 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80041,#80042,#80043,#80044, + #80045,#80046,#80047,#80048,#80049,#80050,#80051,#80052,#80053, + #80054,#80055,#80056,#80057,#80058,#80059),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.783841660733E-02, + 0.132665643409,0.195065744795,0.255523430951,0.314848330906, + 0.373440774013,0.432587188646,0.492296890479,0.552542106835, + 0.61238845435,0.672490239269,0.733818090709,0.796578741274, + 0.861439243281,0.929193548085,1.),.UNSPECIFIED.); +#80041 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,5.E-02) + ); +#80042 = CARTESIAN_POINT('',(-0.446699001869,-2.509729135389E-02,5.E-02) + ); +#80043 = CARTESIAN_POINT('',(-0.463672131665,-2.547777665473E-02,5.E-02) + ); +#80044 = CARTESIAN_POINT('',(-0.488473139476,-2.864830815725E-02,5.E-02) + ); +#80045 = CARTESIAN_POINT('',(-0.511904260178,-3.401167866811E-02,5.E-02) + ); +#80046 = CARTESIAN_POINT('',(-0.534080850627,-4.130435031042E-02,5.E-02) + ); +#80047 = CARTESIAN_POINT('',(-0.554844958553,-5.087987111384E-02,5.E-02) + ); +#80048 = CARTESIAN_POINT('',(-0.574274201574,-6.26069713848E-02,5.E-02) + ); +#80049 = CARTESIAN_POINT('',(-0.592303077822,-7.647086856828E-02,5.E-02) + ); +#80050 = CARTESIAN_POINT('',(-0.608901820615,-9.232068183016E-02,5.E-02) + ); +#80051 = CARTESIAN_POINT('',(-0.623803694689,-0.109891559963,5.E-02)); +#80052 = CARTESIAN_POINT('',(-0.636843860028,-0.12894820152,5.E-02)); +#80053 = CARTESIAN_POINT('',(-0.647843558343,-0.149404723804,5.E-02)); +#80054 = CARTESIAN_POINT('',(-0.656938169152,-0.171180763624,5.E-02)); +#80055 = CARTESIAN_POINT('',(-0.663877455007,-0.194376880065,5.E-02)); +#80056 = CARTESIAN_POINT('',(-0.668765547864,-0.218907773945,5.E-02)); +#80057 = CARTESIAN_POINT('',(-0.671932085488,-0.244776759977,5.E-02)); +#80058 = CARTESIAN_POINT('',(-0.672238321582,-0.262507483484,5.E-02)); +#80059 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,5.E-02)); +#80060 = ORIENTED_EDGE('',*,*,#80061,.T.); +#80061 = EDGE_CURVE('',#80038,#80062,#80064,.T.); +#80062 = VERTEX_POINT('',#80063); +#80063 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,5.E-02)); +#80064 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80065,#80066,#80067,#80068, + #80069,#80070,#80071,#80072,#80073,#80074,#80075,#80076,#80077, + #80078,#80079,#80080,#80081,#80082,#80083),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.063773301118E-02, + 0.13824500117,0.2033468934,0.266231764643,0.328110624574, + 0.388737346952,0.449605806425,0.511038084245,0.572095061666, + 0.631883581169,0.691143381876,0.750381181209,0.810048996234, + 0.871373350146,0.934432697147,1.),.UNSPECIFIED.); +#80065 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,5.E-02)); +#80066 = CARTESIAN_POINT('',(-0.672176148381,-0.281295593077,5.E-02)); +#80067 = CARTESIAN_POINT('',(-0.671748201286,-0.300333202332,5.E-02)); +#80068 = CARTESIAN_POINT('',(-0.668373296918,-0.328175740856,5.E-02)); +#80069 = CARTESIAN_POINT('',(-0.662771429586,-0.354548755655,5.E-02)); +#80070 = CARTESIAN_POINT('',(-0.654970216249,-0.379547244964,5.E-02)); +#80071 = CARTESIAN_POINT('',(-0.644746237669,-0.402987393729,5.E-02)); +#80072 = CARTESIAN_POINT('',(-0.632355241386,-0.425033248793,5.E-02)); +#80073 = CARTESIAN_POINT('',(-0.617738411761,-0.445605436527,5.E-02)); +#80074 = CARTESIAN_POINT('',(-0.600896307709,-0.464478687831,5.E-02)); +#80075 = CARTESIAN_POINT('',(-0.582355409772,-0.481440060594,5.E-02)); +#80076 = CARTESIAN_POINT('',(-0.5625936131,-0.496500137762,5.E-02)); +#80077 = CARTESIAN_POINT('',(-0.541380893844,-0.508947094029,5.E-02)); +#80078 = CARTESIAN_POINT('',(-0.519122642047,-0.519354678672,5.E-02)); +#80079 = CARTESIAN_POINT('',(-0.495547991791,-0.527262236998,5.E-02)); +#80080 = CARTESIAN_POINT('',(-0.470823881912,-0.532952254702,5.E-02)); +#80081 = CARTESIAN_POINT('',(-0.444853697362,-0.536475375389,5.E-02)); +#80082 = CARTESIAN_POINT('',(-0.427138015525,-0.536887680499,5.E-02)); +#80083 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,5.E-02)); +#80084 = ORIENTED_EDGE('',*,*,#80085,.T.); +#80085 = EDGE_CURVE('',#80062,#80086,#80088,.T.); +#80086 = VERTEX_POINT('',#80087); +#80087 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,5.E-02)); +#80088 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80089,#80090,#80091,#80092, + #80093,#80094,#80095,#80096,#80097,#80098,#80099),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.145186866472,0.28344261092, + 0.416524365929,0.543181123535,0.665153082638,0.781360206313, + 0.892756655642,1.),.UNSPECIFIED.); +#80089 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,5.E-02)); +#80090 = CARTESIAN_POINT('',(-0.412294034564,-0.537056180388,5.E-02)); +#80091 = CARTESIAN_POINT('',(-0.40094470314,-0.536974825356,5.E-02)); +#80092 = CARTESIAN_POINT('',(-0.384295080656,-0.535954625723,5.E-02)); +#80093 = CARTESIAN_POINT('',(-0.368421442092,-0.534512771364,5.E-02)); +#80094 = CARTESIAN_POINT('',(-0.353300816422,-0.532264460496,5.E-02)); +#80095 = CARTESIAN_POINT('',(-0.338933981681,-0.5295880808,5.E-02)); +#80096 = CARTESIAN_POINT('',(-0.325374758201,-0.526099291537,5.E-02)); +#80097 = CARTESIAN_POINT('',(-0.312537910033,-0.522190129394,5.E-02)); +#80098 = CARTESIAN_POINT('',(-0.30442365468,-0.518896374251,5.E-02)); +#80099 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,5.E-02)); +#80100 = ORIENTED_EDGE('',*,*,#80101,.T.); +#80101 = EDGE_CURVE('',#80086,#80102,#80104,.T.); +#80102 = VERTEX_POINT('',#80103); +#80103 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,5.E-02)); +#80104 = LINE('',#80105,#80106); +#80105 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,5.E-02)); +#80106 = VECTOR('',#80107,1.); +#80107 = DIRECTION('',(0.,1.,0.)); +#80108 = ORIENTED_EDGE('',*,*,#80109,.T.); +#80109 = EDGE_CURVE('',#80102,#80110,#80112,.T.); +#80110 = VERTEX_POINT('',#80111); +#80111 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,5.E-02)); +#80112 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80113,#80114,#80115,#80116, + #80117,#80118,#80119,#80120,#80121,#80122,#80123),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.125279696736,0.249419970742, + 0.373356799493,0.496681278782,0.620202915744,0.745086320161, + 0.871269195019,1.),.UNSPECIFIED.); +#80113 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,5.E-02)); +#80114 = CARTESIAN_POINT('',(-0.304883785739,-0.452787695199,5.E-02)); +#80115 = CARTESIAN_POINT('',(-0.313723787675,-0.457924402224,5.E-02)); +#80116 = CARTESIAN_POINT('',(-0.327627503482,-0.464346296937,5.E-02)); +#80117 = CARTESIAN_POINT('',(-0.341799125057,-0.469916366024,5.E-02)); +#80118 = CARTESIAN_POINT('',(-0.356337860835,-0.474362866439,5.E-02)); +#80119 = CARTESIAN_POINT('',(-0.371152208332,-0.477953449649,5.E-02)); +#80120 = CARTESIAN_POINT('',(-0.386319851002,-0.480361755006,5.E-02)); +#80121 = CARTESIAN_POINT('',(-0.401812051536,-0.4819820718,5.E-02)); +#80122 = CARTESIAN_POINT('',(-0.41225975368,-0.482140033527,5.E-02)); +#80123 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,5.E-02)); +#80124 = ORIENTED_EDGE('',*,*,#80125,.T.); +#80125 = EDGE_CURVE('',#80110,#80126,#80128,.T.); +#80126 = VERTEX_POINT('',#80127); +#80127 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,5.E-02)); +#80128 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80129,#80130,#80131,#80132, + #80133,#80134,#80135,#80136,#80137,#80138,#80139,#80140,#80141, + #80142,#80143,#80144,#80145,#80146,#80147),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.460651091173E-02, + 0.126707396677,0.186764158456,0.24561607929,0.303634260101, + 0.361487584679,0.420227043541,0.48002251282,0.540669691743, + 0.601185743116,0.662329843678,0.725019474255,0.789459456756, + 0.856499216937,0.92630919798,1.),.UNSPECIFIED.); +#80129 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,5.E-02)); +#80130 = CARTESIAN_POINT('',(-0.424310869402,-0.482075114977,5.E-02)); +#80131 = CARTESIAN_POINT('',(-0.4375982153,-0.481791348727,5.E-02)); +#80132 = CARTESIAN_POINT('',(-0.457003731547,-0.478972609973,5.E-02)); +#80133 = CARTESIAN_POINT('',(-0.475546666728,-0.474823908605,5.E-02)); +#80134 = CARTESIAN_POINT('',(-0.493017084498,-0.46849984702,5.E-02)); +#80135 = CARTESIAN_POINT('',(-0.509643361314,-0.460747744469,5.E-02)); +#80136 = CARTESIAN_POINT('',(-0.525156325439,-0.450966263838,5.E-02)); +#80137 = CARTESIAN_POINT('',(-0.539797730223,-0.439631138926,5.E-02)); +#80138 = CARTESIAN_POINT('',(-0.553298087831,-0.426531995916,5.E-02)); +#80139 = CARTESIAN_POINT('',(-0.565603959129,-0.412051838466,5.E-02)); +#80140 = CARTESIAN_POINT('',(-0.576160966355,-0.396086590988,5.E-02)); +#80141 = CARTESIAN_POINT('',(-0.585349643292,-0.379053791793,5.E-02)); +#80142 = CARTESIAN_POINT('',(-0.592615555223,-0.360667201268,5.E-02)); +#80143 = CARTESIAN_POINT('',(-0.598356849114,-0.341119559592,5.E-02)); +#80144 = CARTESIAN_POINT('',(-0.602431950993,-0.320394251735,5.E-02)); +#80145 = CARTESIAN_POINT('',(-0.604812398168,-0.298427693399,5.E-02)); +#80146 = CARTESIAN_POINT('',(-0.605148860773,-0.283388091486,5.E-02)); +#80147 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,5.E-02)); +#80148 = ORIENTED_EDGE('',*,*,#80149,.T.); +#80149 = EDGE_CURVE('',#80126,#79996,#80150,.T.); +#80150 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#80151,#80152,#80153,#80154, + #80155,#80156,#80157,#80158,#80159,#80160,#80161,#80162,#80163, + #80164,#80165,#80166,#80167,#80168,#80169),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.378258718587E-02, + 0.144095652163,0.211372776945,0.276108573914,0.338559771335, + 0.399646477988,0.460022357923,0.520364180104,0.579989743327, + 0.638421673378,0.696329698138,0.753973538922,0.812784195164, + 0.872739820247,0.935174557152,1.),.UNSPECIFIED.); +#80151 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,5.E-02)); +#80152 = CARTESIAN_POINT('',(-0.60518276358,-0.268354306426,5.E-02)); +#80153 = CARTESIAN_POINT('',(-0.604911537878,-0.254076839301,5.E-02)); +#80154 = CARTESIAN_POINT('',(-0.602580301914,-0.233238230051,5.E-02)); +#80155 = CARTESIAN_POINT('',(-0.598806255601,-0.213534051372,5.E-02)); +#80156 = CARTESIAN_POINT('',(-0.593494527421,-0.194986419725,5.E-02)); +#80157 = CARTESIAN_POINT('',(-0.586605651776,-0.177621902298,5.E-02)); +#80158 = CARTESIAN_POINT('',(-0.578192957903,-0.161425688481,5.E-02)); +#80159 = CARTESIAN_POINT('',(-0.568232662047,-0.146380508706,5.E-02)); +#80160 = CARTESIAN_POINT('',(-0.55681922625,-0.132593596886,5.E-02)); +#80161 = CARTESIAN_POINT('',(-0.54416079038,-0.120216099528,5.E-02)); +#80162 = CARTESIAN_POINT('',(-0.53046878791,-0.10937703914,5.E-02)); +#80163 = CARTESIAN_POINT('',(-0.515848457893,-0.100183028112,5.E-02)); +#80164 = CARTESIAN_POINT('',(-0.500248086573,-9.268891085615E-02,5.E-02) + ); +#80165 = CARTESIAN_POINT('',(-0.483731913021,-8.686796805724E-02,5.E-02) + ); +#80166 = CARTESIAN_POINT('',(-0.466222201188,-8.279562363225E-02,5.E-02) + ); +#80167 = CARTESIAN_POINT('',(-0.447811408009,-8.027118376189E-02,5.E-02) + ); +#80168 = CARTESIAN_POINT('',(-0.435201563115,-7.994628207516E-02,5.E-02) + ); +#80169 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,5.E-02) + ); +#80170 = FACE_BOUND('',#80171,.T.); +#80171 = EDGE_LOOP('',(#80172,#80182,#80190,#80198,#80206,#80214)); +#80172 = ORIENTED_EDGE('',*,*,#80173,.T.); +#80173 = EDGE_CURVE('',#80174,#80176,#80178,.T.); +#80174 = VERTEX_POINT('',#80175); +#80175 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,5.E-02)); +#80176 = VERTEX_POINT('',#80177); +#80177 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,5.E-02) + ); +#80178 = LINE('',#80179,#80180); +#80179 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,5.E-02)); +#80180 = VECTOR('',#80181,1.); +#80181 = DIRECTION('',(1.,0.,0.)); +#80182 = ORIENTED_EDGE('',*,*,#80183,.T.); +#80183 = EDGE_CURVE('',#80176,#80184,#80186,.T.); +#80184 = VERTEX_POINT('',#80185); +#80185 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,5.E-02) + ); +#80186 = LINE('',#80187,#80188); +#80187 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,5.E-02) + ); +#80188 = VECTOR('',#80189,1.); +#80189 = DIRECTION('',(0.,1.,0.)); +#80190 = ORIENTED_EDGE('',*,*,#80191,.T.); +#80191 = EDGE_CURVE('',#80184,#80192,#80194,.T.); +#80192 = VERTEX_POINT('',#80193); +#80193 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,5.E-02) + ); +#80194 = LINE('',#80195,#80196); +#80195 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,5.E-02) + ); +#80196 = VECTOR('',#80197,1.); +#80197 = DIRECTION('',(-1.,0.,0.)); +#80198 = ORIENTED_EDGE('',*,*,#80199,.T.); +#80199 = EDGE_CURVE('',#80192,#80200,#80202,.T.); +#80200 = VERTEX_POINT('',#80201); +#80201 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,5.E-02)); +#80202 = LINE('',#80203,#80204); +#80203 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,5.E-02) + ); +#80204 = VECTOR('',#80205,1.); +#80205 = DIRECTION('',(0.,-1.,0.)); +#80206 = ORIENTED_EDGE('',*,*,#80207,.T.); +#80207 = EDGE_CURVE('',#80200,#80208,#80210,.T.); +#80208 = VERTEX_POINT('',#80209); +#80209 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,5.E-02)); +#80210 = LINE('',#80211,#80212); +#80211 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,5.E-02)); +#80212 = VECTOR('',#80213,1.); +#80213 = DIRECTION('',(1.,0.,0.)); +#80214 = ORIENTED_EDGE('',*,*,#80215,.T.); +#80215 = EDGE_CURVE('',#80208,#80174,#80216,.T.); +#80216 = LINE('',#80217,#80218); +#80217 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,5.E-02)); +#80218 = VECTOR('',#80219,1.); +#80219 = DIRECTION('',(0.,1.,0.)); +#80220 = PLANE('',#80221); +#80221 = AXIS2_PLACEMENT_3D('',#80222,#80223,#80224); +#80222 = CARTESIAN_POINT('',(0.,0.,5.E-02)); +#80223 = DIRECTION('',(0.,0.,-1.)); +#80224 = DIRECTION('',(-1.,0.,-0.)); +#80225 = ADVANCED_FACE('',(#80226,#80260,#80294,#80328,#80362,#80396, + #80430,#80464,#80498),#80532,.F.); +#80226 = FACE_BOUND('',#80227,.T.); +#80227 = EDGE_LOOP('',(#80228,#80238,#80246,#80254)); +#80228 = ORIENTED_EDGE('',*,*,#80229,.F.); +#80229 = EDGE_CURVE('',#80230,#80232,#80234,.T.); +#80230 = VERTEX_POINT('',#80231); +#80231 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.95)); +#80232 = VERTEX_POINT('',#80233); +#80233 = CARTESIAN_POINT('',(0.375,1.852187257439,1.95)); +#80234 = LINE('',#80235,#80236); +#80235 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.95)); +#80236 = VECTOR('',#80237,1.); +#80237 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#80238 = ORIENTED_EDGE('',*,*,#80239,.F.); +#80239 = EDGE_CURVE('',#80240,#80230,#80242,.T.); +#80240 = VERTEX_POINT('',#80241); +#80241 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.95)); +#80242 = LINE('',#80243,#80244); +#80243 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.95)); +#80244 = VECTOR('',#80245,1.); +#80245 = DIRECTION('',(1.,-0.,-0.)); +#80246 = ORIENTED_EDGE('',*,*,#80247,.F.); +#80247 = EDGE_CURVE('',#80248,#80240,#80250,.T.); +#80248 = VERTEX_POINT('',#80249); +#80249 = CARTESIAN_POINT('',(0.125,1.852187257439,1.95)); +#80250 = LINE('',#80251,#80252); +#80251 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.95)); +#80252 = VECTOR('',#80253,1.); +#80253 = DIRECTION('',(2.385244779468E-16,-1.,-0.)); +#80254 = ORIENTED_EDGE('',*,*,#80255,.F.); +#80255 = EDGE_CURVE('',#80232,#80248,#80256,.T.); +#80256 = LINE('',#80257,#80258); +#80257 = CARTESIAN_POINT('',(0.375,1.852187257439,1.95)); +#80258 = VECTOR('',#80259,1.); +#80259 = DIRECTION('',(-1.,-8.673617379884E-16,0.)); +#80260 = FACE_BOUND('',#80261,.T.); +#80261 = EDGE_LOOP('',(#80262,#80272,#80280,#80288)); +#80262 = ORIENTED_EDGE('',*,*,#80263,.F.); +#80263 = EDGE_CURVE('',#80264,#80266,#80268,.T.); +#80264 = VERTEX_POINT('',#80265); +#80265 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.95)); +#80266 = VERTEX_POINT('',#80267); +#80267 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.95)); +#80268 = LINE('',#80269,#80270); +#80269 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.95)); +#80270 = VECTOR('',#80271,1.); +#80271 = DIRECTION('',(0.,1.,0.)); +#80272 = ORIENTED_EDGE('',*,*,#80273,.F.); +#80273 = EDGE_CURVE('',#80274,#80264,#80276,.T.); +#80274 = VERTEX_POINT('',#80275); +#80275 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.95)); +#80276 = LINE('',#80277,#80278); +#80277 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.95)); +#80278 = VECTOR('',#80279,1.); +#80279 = DIRECTION('',(1.,0.,0.)); +#80280 = ORIENTED_EDGE('',*,*,#80281,.F.); +#80281 = EDGE_CURVE('',#80282,#80274,#80284,.T.); +#80282 = VERTEX_POINT('',#80283); +#80283 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.95)); +#80284 = LINE('',#80285,#80286); +#80285 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.95)); +#80286 = VECTOR('',#80287,1.); +#80287 = DIRECTION('',(-0.,-1.,-0.)); +#80288 = ORIENTED_EDGE('',*,*,#80289,.F.); +#80289 = EDGE_CURVE('',#80266,#80282,#80290,.T.); +#80290 = LINE('',#80291,#80292); +#80291 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.95)); +#80292 = VECTOR('',#80293,1.); +#80293 = DIRECTION('',(-1.,-0.,-0.)); +#80294 = FACE_BOUND('',#80295,.T.); +#80295 = EDGE_LOOP('',(#80296,#80306,#80314,#80322)); +#80296 = ORIENTED_EDGE('',*,*,#80297,.F.); +#80297 = EDGE_CURVE('',#80298,#80300,#80302,.T.); +#80298 = VERTEX_POINT('',#80299); +#80299 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.95)); +#80300 = VERTEX_POINT('',#80301); +#80301 = CARTESIAN_POINT('',(1.375,1.852187257439,1.95)); +#80302 = LINE('',#80303,#80304); +#80303 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.95)); +#80304 = VECTOR('',#80305,1.); +#80305 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#80306 = ORIENTED_EDGE('',*,*,#80307,.F.); +#80307 = EDGE_CURVE('',#80308,#80298,#80310,.T.); +#80308 = VERTEX_POINT('',#80309); +#80309 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.95)); +#80310 = LINE('',#80311,#80312); +#80311 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.95)); +#80312 = VECTOR('',#80313,1.); +#80313 = DIRECTION('',(1.,-0.,-0.)); +#80314 = ORIENTED_EDGE('',*,*,#80315,.F.); +#80315 = EDGE_CURVE('',#80316,#80308,#80318,.T.); +#80316 = VERTEX_POINT('',#80317); +#80317 = CARTESIAN_POINT('',(1.125,1.852187257439,1.95)); +#80318 = LINE('',#80319,#80320); +#80319 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.95)); +#80320 = VECTOR('',#80321,1.); +#80321 = DIRECTION('',(3.469446951954E-16,-1.,-0.)); +#80322 = ORIENTED_EDGE('',*,*,#80323,.F.); +#80323 = EDGE_CURVE('',#80300,#80316,#80324,.T.); +#80324 = LINE('',#80325,#80326); +#80325 = CARTESIAN_POINT('',(1.375,1.852187257439,1.95)); +#80326 = VECTOR('',#80327,1.); +#80327 = DIRECTION('',(-1.,0.,0.)); +#80328 = FACE_BOUND('',#80329,.T.); +#80329 = EDGE_LOOP('',(#80330,#80340,#80348,#80356)); +#80330 = ORIENTED_EDGE('',*,*,#80331,.F.); +#80331 = EDGE_CURVE('',#80332,#80334,#80336,.T.); +#80332 = VERTEX_POINT('',#80333); +#80333 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.95)); +#80334 = VERTEX_POINT('',#80335); +#80335 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.95)); +#80336 = LINE('',#80337,#80338); +#80337 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.95)); +#80338 = VECTOR('',#80339,1.); +#80339 = DIRECTION('',(-3.469446951954E-16,1.,-0.)); +#80340 = ORIENTED_EDGE('',*,*,#80341,.F.); +#80341 = EDGE_CURVE('',#80342,#80332,#80344,.T.); +#80342 = VERTEX_POINT('',#80343); +#80343 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.95)); +#80344 = LINE('',#80345,#80346); +#80345 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.95)); +#80346 = VECTOR('',#80347,1.); +#80347 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#80348 = ORIENTED_EDGE('',*,*,#80349,.F.); +#80349 = EDGE_CURVE('',#80350,#80342,#80352,.T.); +#80350 = VERTEX_POINT('',#80351); +#80351 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.95)); +#80352 = LINE('',#80353,#80354); +#80353 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.95)); +#80354 = VECTOR('',#80355,1.); +#80355 = DIRECTION('',(-1.734723475977E-16,-1.,0.)); +#80356 = ORIENTED_EDGE('',*,*,#80357,.F.); +#80357 = EDGE_CURVE('',#80334,#80350,#80358,.T.); +#80358 = LINE('',#80359,#80360); +#80359 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.95)); +#80360 = VECTOR('',#80361,1.); +#80361 = DIRECTION('',(-1.,-0.,-0.)); +#80362 = FACE_BOUND('',#80363,.T.); +#80363 = EDGE_LOOP('',(#80364,#80374,#80382,#80390)); +#80364 = ORIENTED_EDGE('',*,*,#80365,.F.); +#80365 = EDGE_CURVE('',#80366,#80368,#80370,.T.); +#80366 = VERTEX_POINT('',#80367); +#80367 = CARTESIAN_POINT('',(3.,2.05,1.95)); +#80368 = VERTEX_POINT('',#80369); +#80369 = CARTESIAN_POINT('',(3.,-1.4,1.95)); +#80370 = LINE('',#80371,#80372); +#80371 = CARTESIAN_POINT('',(3.,9.227216610312,1.95)); +#80372 = VECTOR('',#80373,1.); +#80373 = DIRECTION('',(-0.,-1.,-0.)); +#80374 = ORIENTED_EDGE('',*,*,#80375,.T.); +#80375 = EDGE_CURVE('',#80366,#80376,#80378,.T.); +#80376 = VERTEX_POINT('',#80377); +#80377 = CARTESIAN_POINT('',(-3.,2.05,1.95)); +#80378 = LINE('',#80379,#80380); +#80379 = CARTESIAN_POINT('',(-3.,2.05,1.95)); +#80380 = VECTOR('',#80381,1.); +#80381 = DIRECTION('',(-1.,0.,0.)); +#80382 = ORIENTED_EDGE('',*,*,#80383,.T.); +#80383 = EDGE_CURVE('',#80376,#80384,#80386,.T.); +#80384 = VERTEX_POINT('',#80385); +#80385 = CARTESIAN_POINT('',(-3.,-1.4,1.95)); +#80386 = LINE('',#80387,#80388); +#80387 = CARTESIAN_POINT('',(-3.,9.227216610312,1.95)); +#80388 = VECTOR('',#80389,1.); +#80389 = DIRECTION('',(-0.,-1.,-0.)); +#80390 = ORIENTED_EDGE('',*,*,#80391,.T.); +#80391 = EDGE_CURVE('',#80384,#80368,#80392,.T.); +#80392 = LINE('',#80393,#80394); +#80393 = CARTESIAN_POINT('',(-3.,-1.4,1.95)); +#80394 = VECTOR('',#80395,1.); +#80395 = DIRECTION('',(1.,0.,0.)); +#80396 = FACE_BOUND('',#80397,.T.); +#80397 = EDGE_LOOP('',(#80398,#80408,#80416,#80424)); +#80398 = ORIENTED_EDGE('',*,*,#80399,.F.); +#80399 = EDGE_CURVE('',#80400,#80402,#80404,.T.); +#80400 = VERTEX_POINT('',#80401); +#80401 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.95)); +#80402 = VERTEX_POINT('',#80403); +#80403 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.95)); +#80404 = LINE('',#80405,#80406); +#80405 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.95)); +#80406 = VECTOR('',#80407,1.); +#80407 = DIRECTION('',(0.,1.,0.)); +#80408 = ORIENTED_EDGE('',*,*,#80409,.F.); +#80409 = EDGE_CURVE('',#80410,#80400,#80412,.T.); +#80410 = VERTEX_POINT('',#80411); +#80411 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.95)); +#80412 = LINE('',#80413,#80414); +#80413 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.95)); +#80414 = VECTOR('',#80415,1.); +#80415 = DIRECTION('',(1.,0.,0.)); +#80416 = ORIENTED_EDGE('',*,*,#80417,.F.); +#80417 = EDGE_CURVE('',#80418,#80410,#80420,.T.); +#80418 = VERTEX_POINT('',#80419); +#80419 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.95)); +#80420 = LINE('',#80421,#80422); +#80421 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.95)); +#80422 = VECTOR('',#80423,1.); +#80423 = DIRECTION('',(-0.,-1.,-0.)); +#80424 = ORIENTED_EDGE('',*,*,#80425,.F.); +#80425 = EDGE_CURVE('',#80402,#80418,#80426,.T.); +#80426 = LINE('',#80427,#80428); +#80427 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.95)); +#80428 = VECTOR('',#80429,1.); +#80429 = DIRECTION('',(-1.,-0.,-0.)); +#80430 = FACE_BOUND('',#80431,.T.); +#80431 = EDGE_LOOP('',(#80432,#80442,#80450,#80458)); +#80432 = ORIENTED_EDGE('',*,*,#80433,.F.); +#80433 = EDGE_CURVE('',#80434,#80436,#80438,.T.); +#80434 = VERTEX_POINT('',#80435); +#80435 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.95)); +#80436 = VERTEX_POINT('',#80437); +#80437 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.95)); +#80438 = LINE('',#80439,#80440); +#80439 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.95)); +#80440 = VECTOR('',#80441,1.); +#80441 = DIRECTION('',(0.,1.,0.)); +#80442 = ORIENTED_EDGE('',*,*,#80443,.F.); +#80443 = EDGE_CURVE('',#80444,#80434,#80446,.T.); +#80444 = VERTEX_POINT('',#80445); +#80445 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.95)); +#80446 = LINE('',#80447,#80448); +#80447 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.95)); +#80448 = VECTOR('',#80449,1.); +#80449 = DIRECTION('',(1.,0.,0.)); +#80450 = ORIENTED_EDGE('',*,*,#80451,.F.); +#80451 = EDGE_CURVE('',#80452,#80444,#80454,.T.); +#80452 = VERTEX_POINT('',#80453); +#80453 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.95)); +#80454 = LINE('',#80455,#80456); +#80455 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.95)); +#80456 = VECTOR('',#80457,1.); +#80457 = DIRECTION('',(-0.,-1.,-0.)); +#80458 = ORIENTED_EDGE('',*,*,#80459,.F.); +#80459 = EDGE_CURVE('',#80436,#80452,#80460,.T.); +#80460 = LINE('',#80461,#80462); +#80461 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.95)); +#80462 = VECTOR('',#80463,1.); +#80463 = DIRECTION('',(-1.,-0.,-0.)); +#80464 = FACE_BOUND('',#80465,.T.); +#80465 = EDGE_LOOP('',(#80466,#80476,#80484,#80492)); +#80466 = ORIENTED_EDGE('',*,*,#80467,.F.); +#80467 = EDGE_CURVE('',#80468,#80470,#80472,.T.); +#80468 = VERTEX_POINT('',#80469); +#80469 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.95)); +#80470 = VERTEX_POINT('',#80471); +#80471 = CARTESIAN_POINT('',(0.875,1.852187257439,1.95)); +#80472 = LINE('',#80473,#80474); +#80473 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.95)); +#80474 = VECTOR('',#80475,1.); +#80475 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#80476 = ORIENTED_EDGE('',*,*,#80477,.F.); +#80477 = EDGE_CURVE('',#80478,#80468,#80480,.T.); +#80478 = VERTEX_POINT('',#80479); +#80479 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.95)); +#80480 = LINE('',#80481,#80482); +#80481 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.95)); +#80482 = VECTOR('',#80483,1.); +#80483 = DIRECTION('',(1.,-0.,-0.)); +#80484 = ORIENTED_EDGE('',*,*,#80485,.F.); +#80485 = EDGE_CURVE('',#80486,#80478,#80488,.T.); +#80486 = VERTEX_POINT('',#80487); +#80487 = CARTESIAN_POINT('',(0.625,1.852187257439,1.95)); +#80488 = LINE('',#80489,#80490); +#80489 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.95)); +#80490 = VECTOR('',#80491,1.); +#80491 = DIRECTION('',(2.602085213965E-16,-1.,-0.)); +#80492 = ORIENTED_EDGE('',*,*,#80493,.F.); +#80493 = EDGE_CURVE('',#80470,#80486,#80494,.T.); +#80494 = LINE('',#80495,#80496); +#80495 = CARTESIAN_POINT('',(0.875,1.852187257439,1.95)); +#80496 = VECTOR('',#80497,1.); +#80497 = DIRECTION('',(-1.,0.,0.)); +#80498 = FACE_BOUND('',#80499,.T.); +#80499 = EDGE_LOOP('',(#80500,#80510,#80518,#80526)); +#80500 = ORIENTED_EDGE('',*,*,#80501,.F.); +#80501 = EDGE_CURVE('',#80502,#80504,#80506,.T.); +#80502 = VERTEX_POINT('',#80503); +#80503 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.95)); +#80504 = VERTEX_POINT('',#80505); +#80505 = CARTESIAN_POINT('',(2.8,1.852187257439,1.95)); +#80506 = LINE('',#80507,#80508); +#80507 = CARTESIAN_POINT('',(2.8,1.852187257439,1.95)); +#80508 = VECTOR('',#80509,1.); +#80509 = DIRECTION('',(-5.20417042793E-16,1.,-0.)); +#80510 = ORIENTED_EDGE('',*,*,#80511,.F.); +#80511 = EDGE_CURVE('',#80512,#80502,#80514,.T.); +#80512 = VERTEX_POINT('',#80513); +#80513 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.95)); +#80514 = LINE('',#80515,#80516); +#80515 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.95)); +#80516 = VECTOR('',#80517,1.); +#80517 = DIRECTION('',(1.,-1.807003620809E-16,-0.)); +#80518 = ORIENTED_EDGE('',*,*,#80519,.F.); +#80519 = EDGE_CURVE('',#80520,#80512,#80522,.T.); +#80520 = VERTEX_POINT('',#80521); +#80521 = CARTESIAN_POINT('',(2.2,1.852187257439,1.95)); +#80522 = LINE('',#80523,#80524); +#80523 = CARTESIAN_POINT('',(2.2,1.852187257439,1.95)); +#80524 = VECTOR('',#80525,1.); +#80525 = DIRECTION('',(0.,-1.,0.)); +#80526 = ORIENTED_EDGE('',*,*,#80527,.F.); +#80527 = EDGE_CURVE('',#80504,#80520,#80528,.T.); +#80528 = LINE('',#80529,#80530); +#80529 = CARTESIAN_POINT('',(2.8,1.852187257439,1.95)); +#80530 = VECTOR('',#80531,1.); +#80531 = DIRECTION('',(-1.,-3.614007241618E-16,0.)); +#80532 = PLANE('',#80533); +#80533 = AXIS2_PLACEMENT_3D('',#80534,#80535,#80536); +#80534 = CARTESIAN_POINT('',(-3.,9.227216610312,1.95)); +#80535 = DIRECTION('',(0.,0.,-1.)); +#80536 = DIRECTION('',(-1.,0.,-0.)); +#80537 = ADVANCED_FACE('',(#80538),#80956,.F.); +#80538 = FACE_BOUND('',#80539,.T.); +#80539 = EDGE_LOOP('',(#80540,#80550,#80558,#80566,#80574,#80582,#80590, + #80598,#80606,#80614,#80622,#80630,#80638,#80646,#80654,#80662, + #80670,#80678,#80686,#80694,#80702,#80710,#80718,#80726,#80734, + #80742,#80750,#80758,#80766,#80774,#80782,#80790,#80798,#80806, + #80814,#80822,#80830,#80838,#80846,#80854,#80862,#80870,#80878, + #80886,#80894,#80902,#80910,#80918,#80926,#80934,#80942,#80950)); +#80540 = ORIENTED_EDGE('',*,*,#80541,.F.); +#80541 = EDGE_CURVE('',#80542,#80544,#80546,.T.); +#80542 = VERTEX_POINT('',#80543); +#80543 = CARTESIAN_POINT('',(-3.425,-4.7,0.2)); +#80544 = VERTEX_POINT('',#80545); +#80545 = CARTESIAN_POINT('',(-3.425,-4.25,0.2)); +#80546 = LINE('',#80547,#80548); +#80547 = CARTESIAN_POINT('',(-3.425,-5.3,0.2)); +#80548 = VECTOR('',#80549,1.); +#80549 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#80550 = ORIENTED_EDGE('',*,*,#80551,.F.); +#80551 = EDGE_CURVE('',#80552,#80542,#80554,.T.); +#80552 = VERTEX_POINT('',#80553); +#80553 = CARTESIAN_POINT('',(-3.47,-4.7,0.2)); +#80554 = LINE('',#80555,#80556); +#80555 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80556 = VECTOR('',#80557,1.); +#80557 = DIRECTION('',(1.,0.,-0.)); +#80558 = ORIENTED_EDGE('',*,*,#80559,.T.); +#80559 = EDGE_CURVE('',#80552,#80560,#80562,.T.); +#80560 = VERTEX_POINT('',#80561); +#80561 = CARTESIAN_POINT('',(-3.47,-4.2,0.2)); +#80562 = LINE('',#80563,#80564); +#80563 = CARTESIAN_POINT('',(-3.47,-5.2,0.2)); +#80564 = VECTOR('',#80565,1.); +#80565 = DIRECTION('',(0.,1.,0.)); +#80566 = ORIENTED_EDGE('',*,*,#80567,.T.); +#80567 = EDGE_CURVE('',#80560,#80568,#80570,.T.); +#80568 = VERTEX_POINT('',#80569); +#80569 = CARTESIAN_POINT('',(3.47,-4.2,0.2)); +#80570 = LINE('',#80571,#80572); +#80571 = CARTESIAN_POINT('',(3.47,-4.2,0.2)); +#80572 = VECTOR('',#80573,1.); +#80573 = DIRECTION('',(1.,-0.,-0.)); +#80574 = ORIENTED_EDGE('',*,*,#80575,.T.); +#80575 = EDGE_CURVE('',#80568,#80576,#80578,.T.); +#80576 = VERTEX_POINT('',#80577); +#80577 = CARTESIAN_POINT('',(3.47,-4.7,0.2)); +#80578 = LINE('',#80579,#80580); +#80579 = CARTESIAN_POINT('',(3.47,-5.2,0.2)); +#80580 = VECTOR('',#80581,1.); +#80581 = DIRECTION('',(-0.,-1.,-0.)); +#80582 = ORIENTED_EDGE('',*,*,#80583,.F.); +#80583 = EDGE_CURVE('',#80584,#80576,#80586,.T.); +#80584 = VERTEX_POINT('',#80585); +#80585 = CARTESIAN_POINT('',(3.425,-4.7,0.2)); +#80586 = LINE('',#80587,#80588); +#80587 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80588 = VECTOR('',#80589,1.); +#80589 = DIRECTION('',(1.,0.,-0.)); +#80590 = ORIENTED_EDGE('',*,*,#80591,.F.); +#80591 = EDGE_CURVE('',#80592,#80584,#80594,.T.); +#80592 = VERTEX_POINT('',#80593); +#80593 = CARTESIAN_POINT('',(3.425,-4.25,0.2)); +#80594 = LINE('',#80595,#80596); +#80595 = CARTESIAN_POINT('',(3.425,-5.3,0.2)); +#80596 = VECTOR('',#80597,1.); +#80597 = DIRECTION('',(-0.,-1.,-0.)); +#80598 = ORIENTED_EDGE('',*,*,#80599,.F.); +#80599 = EDGE_CURVE('',#80600,#80592,#80602,.T.); +#80600 = VERTEX_POINT('',#80601); +#80601 = CARTESIAN_POINT('',(3.025,-4.25,0.2)); +#80602 = LINE('',#80603,#80604); +#80603 = CARTESIAN_POINT('',(3.425,-4.25,0.2)); +#80604 = VECTOR('',#80605,1.); +#80605 = DIRECTION('',(1.,-0.,-0.)); +#80606 = ORIENTED_EDGE('',*,*,#80607,.F.); +#80607 = EDGE_CURVE('',#80608,#80600,#80610,.T.); +#80608 = VERTEX_POINT('',#80609); +#80609 = CARTESIAN_POINT('',(3.025,-4.7,0.2)); +#80610 = LINE('',#80611,#80612); +#80611 = CARTESIAN_POINT('',(3.025,0.,0.2)); +#80612 = VECTOR('',#80613,1.); +#80613 = DIRECTION('',(0.,1.,0.)); +#80614 = ORIENTED_EDGE('',*,*,#80615,.F.); +#80615 = EDGE_CURVE('',#80616,#80608,#80618,.T.); +#80616 = VERTEX_POINT('',#80617); +#80617 = CARTESIAN_POINT('',(2.65,-4.7,0.2)); +#80618 = LINE('',#80619,#80620); +#80619 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80620 = VECTOR('',#80621,1.); +#80621 = DIRECTION('',(1.,0.,-0.)); +#80622 = ORIENTED_EDGE('',*,*,#80623,.F.); +#80623 = EDGE_CURVE('',#80624,#80616,#80626,.T.); +#80624 = VERTEX_POINT('',#80625); +#80625 = CARTESIAN_POINT('',(2.65,-4.25,0.2)); +#80626 = LINE('',#80627,#80628); +#80627 = CARTESIAN_POINT('',(2.65,-5.3,0.2)); +#80628 = VECTOR('',#80629,1.); +#80629 = DIRECTION('',(-0.,-1.,-0.)); +#80630 = ORIENTED_EDGE('',*,*,#80631,.F.); +#80631 = EDGE_CURVE('',#80632,#80624,#80634,.T.); +#80632 = VERTEX_POINT('',#80633); +#80633 = CARTESIAN_POINT('',(2.25,-4.25,0.2)); +#80634 = LINE('',#80635,#80636); +#80635 = CARTESIAN_POINT('',(2.25,-4.25,0.2)); +#80636 = VECTOR('',#80637,1.); +#80637 = DIRECTION('',(1.,0.,0.)); +#80638 = ORIENTED_EDGE('',*,*,#80639,.F.); +#80639 = EDGE_CURVE('',#80640,#80632,#80642,.T.); +#80640 = VERTEX_POINT('',#80641); +#80641 = CARTESIAN_POINT('',(2.25,-4.7,0.2)); +#80642 = LINE('',#80643,#80644); +#80643 = CARTESIAN_POINT('',(2.25,-5.3,0.2)); +#80644 = VECTOR('',#80645,1.); +#80645 = DIRECTION('',(0.,1.,0.)); +#80646 = ORIENTED_EDGE('',*,*,#80647,.F.); +#80647 = EDGE_CURVE('',#80648,#80640,#80650,.T.); +#80648 = VERTEX_POINT('',#80649); +#80649 = CARTESIAN_POINT('',(1.85,-4.7,0.2)); +#80650 = LINE('',#80651,#80652); +#80651 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80652 = VECTOR('',#80653,1.); +#80653 = DIRECTION('',(1.,0.,-0.)); +#80654 = ORIENTED_EDGE('',*,*,#80655,.F.); +#80655 = EDGE_CURVE('',#80656,#80648,#80658,.T.); +#80656 = VERTEX_POINT('',#80657); +#80657 = CARTESIAN_POINT('',(1.85,-4.25,0.2)); +#80658 = LINE('',#80659,#80660); +#80659 = CARTESIAN_POINT('',(1.85,-4.25,0.2)); +#80660 = VECTOR('',#80661,1.); +#80661 = DIRECTION('',(4.130293990421E-16,-1.,0.)); +#80662 = ORIENTED_EDGE('',*,*,#80663,.F.); +#80663 = EDGE_CURVE('',#80664,#80656,#80666,.T.); +#80664 = VERTEX_POINT('',#80665); +#80665 = CARTESIAN_POINT('',(1.65,-4.25,0.2)); +#80666 = LINE('',#80667,#80668); +#80667 = CARTESIAN_POINT('',(1.65,-4.25,0.2)); +#80668 = VECTOR('',#80669,1.); +#80669 = DIRECTION('',(1.,0.,0.)); +#80670 = ORIENTED_EDGE('',*,*,#80671,.F.); +#80671 = EDGE_CURVE('',#80672,#80664,#80674,.T.); +#80672 = VERTEX_POINT('',#80673); +#80673 = CARTESIAN_POINT('',(1.65,-4.7,0.2)); +#80674 = LINE('',#80675,#80676); +#80675 = CARTESIAN_POINT('',(1.65,-4.25,0.2)); +#80676 = VECTOR('',#80677,1.); +#80677 = DIRECTION('',(-4.130293990421E-16,1.,-0.)); +#80678 = ORIENTED_EDGE('',*,*,#80679,.F.); +#80679 = EDGE_CURVE('',#80680,#80672,#80682,.T.); +#80680 = VERTEX_POINT('',#80681); +#80681 = CARTESIAN_POINT('',(1.35,-4.7,0.2)); +#80682 = LINE('',#80683,#80684); +#80683 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80684 = VECTOR('',#80685,1.); +#80685 = DIRECTION('',(1.,0.,-0.)); +#80686 = ORIENTED_EDGE('',*,*,#80687,.F.); +#80687 = EDGE_CURVE('',#80688,#80680,#80690,.T.); +#80688 = VERTEX_POINT('',#80689); +#80689 = CARTESIAN_POINT('',(1.35,-4.25,0.2)); +#80690 = LINE('',#80691,#80692); +#80691 = CARTESIAN_POINT('',(1.35,-4.25,0.2)); +#80692 = VECTOR('',#80693,1.); +#80693 = DIRECTION('',(2.065146995211E-16,-1.,0.)); +#80694 = ORIENTED_EDGE('',*,*,#80695,.F.); +#80695 = EDGE_CURVE('',#80696,#80688,#80698,.T.); +#80696 = VERTEX_POINT('',#80697); +#80697 = CARTESIAN_POINT('',(1.15,-4.25,0.2)); +#80698 = LINE('',#80699,#80700); +#80699 = CARTESIAN_POINT('',(1.15,-4.25,0.2)); +#80700 = VECTOR('',#80701,1.); +#80701 = DIRECTION('',(1.,0.,0.)); +#80702 = ORIENTED_EDGE('',*,*,#80703,.F.); +#80703 = EDGE_CURVE('',#80704,#80696,#80706,.T.); +#80704 = VERTEX_POINT('',#80705); +#80705 = CARTESIAN_POINT('',(1.15,-4.7,0.2)); +#80706 = LINE('',#80707,#80708); +#80707 = CARTESIAN_POINT('',(1.15,-4.25,0.2)); +#80708 = VECTOR('',#80709,1.); +#80709 = DIRECTION('',(-2.065146995211E-16,1.,-0.)); +#80710 = ORIENTED_EDGE('',*,*,#80711,.F.); +#80711 = EDGE_CURVE('',#80712,#80704,#80714,.T.); +#80712 = VERTEX_POINT('',#80713); +#80713 = CARTESIAN_POINT('',(0.85,-4.7,0.2)); +#80714 = LINE('',#80715,#80716); +#80715 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80716 = VECTOR('',#80717,1.); +#80717 = DIRECTION('',(1.,0.,-0.)); +#80718 = ORIENTED_EDGE('',*,*,#80719,.F.); +#80719 = EDGE_CURVE('',#80720,#80712,#80722,.T.); +#80720 = VERTEX_POINT('',#80721); +#80721 = CARTESIAN_POINT('',(0.85,-4.25,0.2)); +#80722 = LINE('',#80723,#80724); +#80723 = CARTESIAN_POINT('',(0.85,-4.25,0.2)); +#80724 = VECTOR('',#80725,1.); +#80725 = DIRECTION('',(0.,-1.,0.)); +#80726 = ORIENTED_EDGE('',*,*,#80727,.F.); +#80727 = EDGE_CURVE('',#80728,#80720,#80730,.T.); +#80728 = VERTEX_POINT('',#80729); +#80729 = CARTESIAN_POINT('',(0.65,-4.25,0.2)); +#80730 = LINE('',#80731,#80732); +#80731 = CARTESIAN_POINT('',(0.65,-4.25,0.2)); +#80732 = VECTOR('',#80733,1.); +#80733 = DIRECTION('',(1.,0.,0.)); +#80734 = ORIENTED_EDGE('',*,*,#80735,.F.); +#80735 = EDGE_CURVE('',#80736,#80728,#80738,.T.); +#80736 = VERTEX_POINT('',#80737); +#80737 = CARTESIAN_POINT('',(0.65,-4.7,0.2)); +#80738 = LINE('',#80739,#80740); +#80739 = CARTESIAN_POINT('',(0.65,-4.25,0.2)); +#80740 = VECTOR('',#80741,1.); +#80741 = DIRECTION('',(-1.032573497605E-16,1.,-0.)); +#80742 = ORIENTED_EDGE('',*,*,#80743,.F.); +#80743 = EDGE_CURVE('',#80744,#80736,#80746,.T.); +#80744 = VERTEX_POINT('',#80745); +#80745 = CARTESIAN_POINT('',(0.35,-4.7,0.2)); +#80746 = LINE('',#80747,#80748); +#80747 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80748 = VECTOR('',#80749,1.); +#80749 = DIRECTION('',(1.,0.,-0.)); +#80750 = ORIENTED_EDGE('',*,*,#80751,.F.); +#80751 = EDGE_CURVE('',#80752,#80744,#80754,.T.); +#80752 = VERTEX_POINT('',#80753); +#80753 = CARTESIAN_POINT('',(0.35,-4.25,0.2)); +#80754 = LINE('',#80755,#80756); +#80755 = CARTESIAN_POINT('',(0.35,-4.25,0.2)); +#80756 = VECTOR('',#80757,1.); +#80757 = DIRECTION('',(0.,-1.,0.)); +#80758 = ORIENTED_EDGE('',*,*,#80759,.F.); +#80759 = EDGE_CURVE('',#80760,#80752,#80762,.T.); +#80760 = VERTEX_POINT('',#80761); +#80761 = CARTESIAN_POINT('',(0.15,-4.25,0.2)); +#80762 = LINE('',#80763,#80764); +#80763 = CARTESIAN_POINT('',(0.15,-4.25,0.2)); +#80764 = VECTOR('',#80765,1.); +#80765 = DIRECTION('',(1.,0.,0.)); +#80766 = ORIENTED_EDGE('',*,*,#80767,.F.); +#80767 = EDGE_CURVE('',#80768,#80760,#80770,.T.); +#80768 = VERTEX_POINT('',#80769); +#80769 = CARTESIAN_POINT('',(0.15,-4.7,0.2)); +#80770 = LINE('',#80771,#80772); +#80771 = CARTESIAN_POINT('',(0.15,-4.25,0.2)); +#80772 = VECTOR('',#80773,1.); +#80773 = DIRECTION('',(5.162867488026E-17,1.,-0.)); +#80774 = ORIENTED_EDGE('',*,*,#80775,.F.); +#80775 = EDGE_CURVE('',#80776,#80768,#80778,.T.); +#80776 = VERTEX_POINT('',#80777); +#80777 = CARTESIAN_POINT('',(-0.15,-4.7,0.2)); +#80778 = LINE('',#80779,#80780); +#80779 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80780 = VECTOR('',#80781,1.); +#80781 = DIRECTION('',(1.,0.,-0.)); +#80782 = ORIENTED_EDGE('',*,*,#80783,.F.); +#80783 = EDGE_CURVE('',#80784,#80776,#80786,.T.); +#80784 = VERTEX_POINT('',#80785); +#80785 = CARTESIAN_POINT('',(-0.15,-4.25,0.2)); +#80786 = LINE('',#80787,#80788); +#80787 = CARTESIAN_POINT('',(-0.15,-4.25,0.2)); +#80788 = VECTOR('',#80789,1.); +#80789 = DIRECTION('',(-1.548860246408E-16,-1.,0.)); +#80790 = ORIENTED_EDGE('',*,*,#80791,.F.); +#80791 = EDGE_CURVE('',#80792,#80784,#80794,.T.); +#80792 = VERTEX_POINT('',#80793); +#80793 = CARTESIAN_POINT('',(-0.35,-4.25,0.2)); +#80794 = LINE('',#80795,#80796); +#80795 = CARTESIAN_POINT('',(-0.15,-4.25,0.2)); +#80796 = VECTOR('',#80797,1.); +#80797 = DIRECTION('',(1.,-0.,-0.)); +#80798 = ORIENTED_EDGE('',*,*,#80799,.F.); +#80799 = EDGE_CURVE('',#80800,#80792,#80802,.T.); +#80800 = VERTEX_POINT('',#80801); +#80801 = CARTESIAN_POINT('',(-0.35,-4.7,0.2)); +#80802 = LINE('',#80803,#80804); +#80803 = CARTESIAN_POINT('',(-0.35,-4.25,0.2)); +#80804 = VECTOR('',#80805,1.); +#80805 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#80806 = ORIENTED_EDGE('',*,*,#80807,.F.); +#80807 = EDGE_CURVE('',#80808,#80800,#80810,.T.); +#80808 = VERTEX_POINT('',#80809); +#80809 = CARTESIAN_POINT('',(-0.65,-4.7,0.2)); +#80810 = LINE('',#80811,#80812); +#80811 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80812 = VECTOR('',#80813,1.); +#80813 = DIRECTION('',(1.,0.,-0.)); +#80814 = ORIENTED_EDGE('',*,*,#80815,.F.); +#80815 = EDGE_CURVE('',#80816,#80808,#80818,.T.); +#80816 = VERTEX_POINT('',#80817); +#80817 = CARTESIAN_POINT('',(-0.65,-4.25,0.2)); +#80818 = LINE('',#80819,#80820); +#80819 = CARTESIAN_POINT('',(-0.65,-4.25,0.2)); +#80820 = VECTOR('',#80821,1.); +#80821 = DIRECTION('',(-3.097720492816E-16,-1.,0.)); +#80822 = ORIENTED_EDGE('',*,*,#80823,.F.); +#80823 = EDGE_CURVE('',#80824,#80816,#80826,.T.); +#80824 = VERTEX_POINT('',#80825); +#80825 = CARTESIAN_POINT('',(-0.85,-4.25,0.2)); +#80826 = LINE('',#80827,#80828); +#80827 = CARTESIAN_POINT('',(-0.65,-4.25,0.2)); +#80828 = VECTOR('',#80829,1.); +#80829 = DIRECTION('',(1.,-0.,-0.)); +#80830 = ORIENTED_EDGE('',*,*,#80831,.F.); +#80831 = EDGE_CURVE('',#80832,#80824,#80834,.T.); +#80832 = VERTEX_POINT('',#80833); +#80833 = CARTESIAN_POINT('',(-0.85,-4.7,0.2)); +#80834 = LINE('',#80835,#80836); +#80835 = CARTESIAN_POINT('',(-0.85,-4.25,0.2)); +#80836 = VECTOR('',#80837,1.); +#80837 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#80838 = ORIENTED_EDGE('',*,*,#80839,.F.); +#80839 = EDGE_CURVE('',#80840,#80832,#80842,.T.); +#80840 = VERTEX_POINT('',#80841); +#80841 = CARTESIAN_POINT('',(-1.15,-4.7,0.2)); +#80842 = LINE('',#80843,#80844); +#80843 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80844 = VECTOR('',#80845,1.); +#80845 = DIRECTION('',(1.,0.,-0.)); +#80846 = ORIENTED_EDGE('',*,*,#80847,.F.); +#80847 = EDGE_CURVE('',#80848,#80840,#80850,.T.); +#80848 = VERTEX_POINT('',#80849); +#80849 = CARTESIAN_POINT('',(-1.15,-4.25,0.2)); +#80850 = LINE('',#80851,#80852); +#80851 = CARTESIAN_POINT('',(-1.15,-4.25,0.2)); +#80852 = VECTOR('',#80853,1.); +#80853 = DIRECTION('',(-2.065146995211E-16,-1.,0.)); +#80854 = ORIENTED_EDGE('',*,*,#80855,.F.); +#80855 = EDGE_CURVE('',#80856,#80848,#80858,.T.); +#80856 = VERTEX_POINT('',#80857); +#80857 = CARTESIAN_POINT('',(-1.35,-4.25,0.2)); +#80858 = LINE('',#80859,#80860); +#80859 = CARTESIAN_POINT('',(-1.15,-4.25,0.2)); +#80860 = VECTOR('',#80861,1.); +#80861 = DIRECTION('',(1.,-0.,-0.)); +#80862 = ORIENTED_EDGE('',*,*,#80863,.F.); +#80863 = EDGE_CURVE('',#80864,#80856,#80866,.T.); +#80864 = VERTEX_POINT('',#80865); +#80865 = CARTESIAN_POINT('',(-1.35,-4.7,0.2)); +#80866 = LINE('',#80867,#80868); +#80867 = CARTESIAN_POINT('',(-1.35,-4.25,0.2)); +#80868 = VECTOR('',#80869,1.); +#80869 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#80870 = ORIENTED_EDGE('',*,*,#80871,.F.); +#80871 = EDGE_CURVE('',#80872,#80864,#80874,.T.); +#80872 = VERTEX_POINT('',#80873); +#80873 = CARTESIAN_POINT('',(-1.65,-4.7,0.2)); +#80874 = LINE('',#80875,#80876); +#80875 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80876 = VECTOR('',#80877,1.); +#80877 = DIRECTION('',(1.,0.,-0.)); +#80878 = ORIENTED_EDGE('',*,*,#80879,.F.); +#80879 = EDGE_CURVE('',#80880,#80872,#80882,.T.); +#80880 = VERTEX_POINT('',#80881); +#80881 = CARTESIAN_POINT('',(-1.65,-4.25,0.2)); +#80882 = LINE('',#80883,#80884); +#80883 = CARTESIAN_POINT('',(-1.65,-4.25,0.2)); +#80884 = VECTOR('',#80885,1.); +#80885 = DIRECTION('',(-4.130293990421E-16,-1.,0.)); +#80886 = ORIENTED_EDGE('',*,*,#80887,.F.); +#80887 = EDGE_CURVE('',#80888,#80880,#80890,.T.); +#80888 = VERTEX_POINT('',#80889); +#80889 = CARTESIAN_POINT('',(-1.85,-4.25,0.2)); +#80890 = LINE('',#80891,#80892); +#80891 = CARTESIAN_POINT('',(-1.65,-4.25,0.2)); +#80892 = VECTOR('',#80893,1.); +#80893 = DIRECTION('',(1.,-4.336808689942E-15,-0.)); +#80894 = ORIENTED_EDGE('',*,*,#80895,.F.); +#80895 = EDGE_CURVE('',#80896,#80888,#80898,.T.); +#80896 = VERTEX_POINT('',#80897); +#80897 = CARTESIAN_POINT('',(-1.85,-4.7,0.2)); +#80898 = LINE('',#80899,#80900); +#80899 = CARTESIAN_POINT('',(-1.85,-4.25,0.2)); +#80900 = VECTOR('',#80901,1.); +#80901 = DIRECTION('',(4.130293990421E-16,1.,-0.)); +#80902 = ORIENTED_EDGE('',*,*,#80903,.F.); +#80903 = EDGE_CURVE('',#80904,#80896,#80906,.T.); +#80904 = VERTEX_POINT('',#80905); +#80905 = CARTESIAN_POINT('',(-2.25,-4.7,0.2)); +#80906 = LINE('',#80907,#80908); +#80907 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80908 = VECTOR('',#80909,1.); +#80909 = DIRECTION('',(1.,0.,-0.)); +#80910 = ORIENTED_EDGE('',*,*,#80911,.F.); +#80911 = EDGE_CURVE('',#80912,#80904,#80914,.T.); +#80912 = VERTEX_POINT('',#80913); +#80913 = CARTESIAN_POINT('',(-2.25,-4.25,0.2)); +#80914 = LINE('',#80915,#80916); +#80915 = CARTESIAN_POINT('',(-2.25,-5.3,0.2)); +#80916 = VECTOR('',#80917,1.); +#80917 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#80918 = ORIENTED_EDGE('',*,*,#80919,.F.); +#80919 = EDGE_CURVE('',#80920,#80912,#80922,.T.); +#80920 = VERTEX_POINT('',#80921); +#80921 = CARTESIAN_POINT('',(-2.65,-4.25,0.2)); +#80922 = LINE('',#80923,#80924); +#80923 = CARTESIAN_POINT('',(-2.25,-4.25,0.2)); +#80924 = VECTOR('',#80925,1.); +#80925 = DIRECTION('',(1.,-0.,-0.)); +#80926 = ORIENTED_EDGE('',*,*,#80927,.F.); +#80927 = EDGE_CURVE('',#80928,#80920,#80930,.T.); +#80928 = VERTEX_POINT('',#80929); +#80929 = CARTESIAN_POINT('',(-2.65,-4.7,0.2)); +#80930 = LINE('',#80931,#80932); +#80931 = CARTESIAN_POINT('',(-2.65,-5.3,0.2)); +#80932 = VECTOR('',#80933,1.); +#80933 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#80934 = ORIENTED_EDGE('',*,*,#80935,.F.); +#80935 = EDGE_CURVE('',#80936,#80928,#80938,.T.); +#80936 = VERTEX_POINT('',#80937); +#80937 = CARTESIAN_POINT('',(-3.025,-4.7,0.2)); +#80938 = LINE('',#80939,#80940); +#80939 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#80940 = VECTOR('',#80941,1.); +#80941 = DIRECTION('',(1.,0.,-0.)); +#80942 = ORIENTED_EDGE('',*,*,#80943,.F.); +#80943 = EDGE_CURVE('',#80944,#80936,#80946,.T.); +#80944 = VERTEX_POINT('',#80945); +#80945 = CARTESIAN_POINT('',(-3.025,-4.25,0.2)); +#80946 = LINE('',#80947,#80948); +#80947 = CARTESIAN_POINT('',(-3.025,-5.3,0.2)); +#80948 = VECTOR('',#80949,1.); +#80949 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#80950 = ORIENTED_EDGE('',*,*,#80951,.F.); +#80951 = EDGE_CURVE('',#80544,#80944,#80952,.T.); +#80952 = LINE('',#80953,#80954); +#80953 = CARTESIAN_POINT('',(-3.425,-4.25,0.2)); +#80954 = VECTOR('',#80955,1.); +#80955 = DIRECTION('',(1.,0.,0.)); +#80956 = PLANE('',#80957); +#80957 = AXIS2_PLACEMENT_3D('',#80958,#80959,#80960); +#80958 = CARTESIAN_POINT('',(0.,0.,0.2)); +#80959 = DIRECTION('',(0.,-0.,1.)); +#80960 = DIRECTION('',(1.,0.,0.)); +#80961 = ADVANCED_FACE('',(#80962),#81014,.F.); +#80962 = FACE_BOUND('',#80963,.T.); +#80963 = EDGE_LOOP('',(#80964,#80974,#80982,#80991,#80999,#81008)); +#80964 = ORIENTED_EDGE('',*,*,#80965,.F.); +#80965 = EDGE_CURVE('',#80966,#80968,#80970,.T.); +#80966 = VERTEX_POINT('',#80967); +#80967 = CARTESIAN_POINT('',(4.17,-3.68,0.75)); +#80968 = VERTEX_POINT('',#80969); +#80969 = CARTESIAN_POINT('',(4.17,-4.67,0.75)); +#80970 = LINE('',#80971,#80972); +#80971 = CARTESIAN_POINT('',(4.17,5.199738091155,0.75)); +#80972 = VECTOR('',#80973,1.); +#80973 = DIRECTION('',(0.,-1.,0.)); +#80974 = ORIENTED_EDGE('',*,*,#80975,.T.); +#80975 = EDGE_CURVE('',#80966,#80976,#80978,.T.); +#80976 = VERTEX_POINT('',#80977); +#80977 = CARTESIAN_POINT('',(4.17,-3.68,-0.45)); +#80978 = LINE('',#80979,#80980); +#80979 = CARTESIAN_POINT('',(4.17,-3.68,0.)); +#80980 = VECTOR('',#80981,1.); +#80981 = DIRECTION('',(0.,-0.,-1.)); +#80982 = ORIENTED_EDGE('',*,*,#80983,.T.); +#80983 = EDGE_CURVE('',#80976,#80984,#80986,.T.); +#80984 = VERTEX_POINT('',#80985); +#80985 = CARTESIAN_POINT('',(4.17,-4.05,-0.82)); +#80986 = CIRCLE('',#80987,0.37); +#80987 = AXIS2_PLACEMENT_3D('',#80988,#80989,#80990); +#80988 = CARTESIAN_POINT('',(4.17,-4.05,-0.45)); +#80989 = DIRECTION('',(-1.,-0.,-0.)); +#80990 = DIRECTION('',(0.,0.,-1.)); +#80991 = ORIENTED_EDGE('',*,*,#80992,.T.); +#80992 = EDGE_CURVE('',#80984,#80993,#80995,.T.); +#80993 = VERTEX_POINT('',#80994); +#80994 = CARTESIAN_POINT('',(4.17,-4.3,-0.82)); +#80995 = LINE('',#80996,#80997); +#80996 = CARTESIAN_POINT('',(4.17,2.6,-0.82)); +#80997 = VECTOR('',#80998,1.); +#80998 = DIRECTION('',(0.,-1.,-0.)); +#80999 = ORIENTED_EDGE('',*,*,#81000,.T.); +#81000 = EDGE_CURVE('',#80993,#81001,#81003,.T.); +#81001 = VERTEX_POINT('',#81002); +#81002 = CARTESIAN_POINT('',(4.17,-4.67,-0.45)); +#81003 = CIRCLE('',#81004,0.37); +#81004 = AXIS2_PLACEMENT_3D('',#81005,#81006,#81007); +#81005 = CARTESIAN_POINT('',(4.17,-4.3,-0.45)); +#81006 = DIRECTION('',(-1.,-0.,-0.)); +#81007 = DIRECTION('',(0.,0.,-1.)); +#81008 = ORIENTED_EDGE('',*,*,#81009,.T.); +#81009 = EDGE_CURVE('',#81001,#80968,#81010,.T.); +#81010 = LINE('',#81011,#81012); +#81011 = CARTESIAN_POINT('',(4.17,-4.67,0.)); +#81012 = VECTOR('',#81013,1.); +#81013 = DIRECTION('',(0.,0.,1.)); +#81014 = PLANE('',#81015); +#81015 = AXIS2_PLACEMENT_3D('',#81016,#81017,#81018); +#81016 = CARTESIAN_POINT('',(4.17,2.6,0.)); +#81017 = DIRECTION('',(1.,0.,0.)); +#81018 = DIRECTION('',(0.,0.,-1.)); +#81019 = ADVANCED_FACE('',(#81020),#81055,.F.); +#81020 = FACE_BOUND('',#81021,.T.); +#81021 = EDGE_LOOP('',(#81022,#81032,#81040,#81048)); +#81022 = ORIENTED_EDGE('',*,*,#81023,.F.); +#81023 = EDGE_CURVE('',#81024,#81026,#81028,.T.); +#81024 = VERTEX_POINT('',#81025); +#81025 = CARTESIAN_POINT('',(-1.15,-4.67,2.95)); +#81026 = VERTEX_POINT('',#81027); +#81027 = CARTESIAN_POINT('',(-1.15,-3.899666295471,2.95)); +#81028 = LINE('',#81029,#81030); +#81029 = CARTESIAN_POINT('',(-1.15,-13.4358800358,2.95)); +#81030 = VECTOR('',#81031,1.); +#81031 = DIRECTION('',(-0.,1.,-0.)); +#81032 = ORIENTED_EDGE('',*,*,#81033,.T.); +#81033 = EDGE_CURVE('',#81024,#81034,#81036,.T.); +#81034 = VERTEX_POINT('',#81035); +#81035 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.95)); +#81036 = LINE('',#81037,#81038); +#81037 = CARTESIAN_POINT('',(0.,-4.67,2.95)); +#81038 = VECTOR('',#81039,1.); +#81039 = DIRECTION('',(-1.,0.,0.)); +#81040 = ORIENTED_EDGE('',*,*,#81041,.T.); +#81041 = EDGE_CURVE('',#81034,#81042,#81044,.T.); +#81042 = VERTEX_POINT('',#81043); +#81043 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,2.95)); +#81044 = LINE('',#81045,#81046); +#81045 = CARTESIAN_POINT('',(-1.235016269382,-4.7,2.95)); +#81046 = VECTOR('',#81047,1.); +#81047 = DIRECTION('',(0.,1.,0.)); +#81048 = ORIENTED_EDGE('',*,*,#81049,.T.); +#81049 = EDGE_CURVE('',#81042,#81026,#81050,.T.); +#81050 = CIRCLE('',#81051,0.18); +#81051 = AXIS2_PLACEMENT_3D('',#81052,#81053,#81054); +#81052 = CARTESIAN_POINT('',(-1.25,-3.75,2.95)); +#81053 = DIRECTION('',(0.,-0.,1.)); +#81054 = DIRECTION('',(1.,0.,0.)); +#81055 = PLANE('',#81056); +#81056 = AXIS2_PLACEMENT_3D('',#81057,#81058,#81059); +#81057 = CARTESIAN_POINT('',(0.,2.6,2.95)); +#81058 = DIRECTION('',(0.,-0.,1.)); +#81059 = DIRECTION('',(1.,0.,0.)); +#81060 = ADVANCED_FACE('',(#81061),#81096,.F.); +#81061 = FACE_BOUND('',#81062,.T.); +#81062 = EDGE_LOOP('',(#81063,#81073,#81082,#81090)); +#81063 = ORIENTED_EDGE('',*,*,#81064,.T.); +#81064 = EDGE_CURVE('',#81065,#81067,#81069,.T.); +#81065 = VERTEX_POINT('',#81066); +#81066 = CARTESIAN_POINT('',(1.15,-4.67,2.95)); +#81067 = VERTEX_POINT('',#81068); +#81068 = CARTESIAN_POINT('',(1.15,-3.899666295464,2.95)); +#81069 = LINE('',#81070,#81071); +#81070 = CARTESIAN_POINT('',(1.15,-13.4358800358,2.95)); +#81071 = VECTOR('',#81072,1.); +#81072 = DIRECTION('',(-0.,1.,-0.)); +#81073 = ORIENTED_EDGE('',*,*,#81074,.T.); +#81074 = EDGE_CURVE('',#81067,#81075,#81077,.T.); +#81075 = VERTEX_POINT('',#81076); +#81076 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,2.95)); +#81077 = CIRCLE('',#81078,0.18); +#81078 = AXIS2_PLACEMENT_3D('',#81079,#81080,#81081); +#81079 = CARTESIAN_POINT('',(1.25,-3.75,2.95)); +#81080 = DIRECTION('',(0.,-0.,1.)); +#81081 = DIRECTION('',(1.,0.,0.)); +#81082 = ORIENTED_EDGE('',*,*,#81083,.F.); +#81083 = EDGE_CURVE('',#81084,#81075,#81086,.T.); +#81084 = VERTEX_POINT('',#81085); +#81085 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.95)); +#81086 = LINE('',#81087,#81088); +#81087 = CARTESIAN_POINT('',(1.235016269382,-4.7,2.95)); +#81088 = VECTOR('',#81089,1.); +#81089 = DIRECTION('',(0.,1.,0.)); +#81090 = ORIENTED_EDGE('',*,*,#81091,.T.); +#81091 = EDGE_CURVE('',#81084,#81065,#81092,.T.); +#81092 = LINE('',#81093,#81094); +#81093 = CARTESIAN_POINT('',(0.,-4.67,2.95)); +#81094 = VECTOR('',#81095,1.); +#81095 = DIRECTION('',(-1.,0.,0.)); +#81096 = PLANE('',#81097); +#81097 = AXIS2_PLACEMENT_3D('',#81098,#81099,#81100); +#81098 = CARTESIAN_POINT('',(0.,2.6,2.95)); +#81099 = DIRECTION('',(0.,-0.,1.)); +#81100 = DIRECTION('',(1.,0.,0.)); +#81101 = ADVANCED_FACE('',(#81102),#81136,.F.); +#81102 = FACE_BOUND('',#81103,.T.); +#81103 = EDGE_LOOP('',(#81104,#81114,#81122,#81130)); +#81104 = ORIENTED_EDGE('',*,*,#81105,.F.); +#81105 = EDGE_CURVE('',#81106,#81108,#81110,.T.); +#81106 = VERTEX_POINT('',#81107); +#81107 = CARTESIAN_POINT('',(-3.1,-3.85,1.93)); +#81108 = VERTEX_POINT('',#81109); +#81109 = CARTESIAN_POINT('',(-3.1,-3.85,2.95)); +#81110 = LINE('',#81111,#81112); +#81111 = CARTESIAN_POINT('',(-3.1,-3.85,2.95)); +#81112 = VECTOR('',#81113,1.); +#81113 = DIRECTION('',(-0.,-0.,1.)); +#81114 = ORIENTED_EDGE('',*,*,#81115,.F.); +#81115 = EDGE_CURVE('',#81116,#81106,#81118,.T.); +#81116 = VERTEX_POINT('',#81117); +#81117 = CARTESIAN_POINT('',(-1.15,-3.85,1.93)); +#81118 = LINE('',#81119,#81120); +#81119 = CARTESIAN_POINT('',(-3.1,-3.85,1.93)); +#81120 = VECTOR('',#81121,1.); +#81121 = DIRECTION('',(-1.,-0.,-0.)); +#81122 = ORIENTED_EDGE('',*,*,#81123,.F.); +#81123 = EDGE_CURVE('',#81124,#81116,#81126,.T.); +#81124 = VERTEX_POINT('',#81125); +#81125 = CARTESIAN_POINT('',(-1.15,-3.85,2.95)); +#81126 = LINE('',#81127,#81128); +#81127 = CARTESIAN_POINT('',(-1.15,-3.85,2.95)); +#81128 = VECTOR('',#81129,1.); +#81129 = DIRECTION('',(0.,0.,-1.)); +#81130 = ORIENTED_EDGE('',*,*,#81131,.F.); +#81131 = EDGE_CURVE('',#81108,#81124,#81132,.T.); +#81132 = LINE('',#81133,#81134); +#81133 = CARTESIAN_POINT('',(-3.47,-3.85,2.95)); +#81134 = VECTOR('',#81135,1.); +#81135 = DIRECTION('',(1.,0.,0.)); +#81136 = PLANE('',#81137); +#81137 = AXIS2_PLACEMENT_3D('',#81138,#81139,#81140); +#81138 = CARTESIAN_POINT('',(-3.47,-3.85,2.25)); +#81139 = DIRECTION('',(0.,1.,0.)); +#81140 = DIRECTION('',(0.,-0.,1.)); +#81141 = ADVANCED_FACE('',(#81142),#81176,.F.); +#81142 = FACE_BOUND('',#81143,.T.); +#81143 = EDGE_LOOP('',(#81144,#81154,#81162,#81170)); +#81144 = ORIENTED_EDGE('',*,*,#81145,.F.); +#81145 = EDGE_CURVE('',#81146,#81148,#81150,.T.); +#81146 = VERTEX_POINT('',#81147); +#81147 = CARTESIAN_POINT('',(1.15,-3.85,1.93)); +#81148 = VERTEX_POINT('',#81149); +#81149 = CARTESIAN_POINT('',(1.15,-3.85,2.95)); +#81150 = LINE('',#81151,#81152); +#81151 = CARTESIAN_POINT('',(1.15,-3.85,2.95)); +#81152 = VECTOR('',#81153,1.); +#81153 = DIRECTION('',(-0.,-0.,1.)); +#81154 = ORIENTED_EDGE('',*,*,#81155,.F.); +#81155 = EDGE_CURVE('',#81156,#81146,#81158,.T.); +#81156 = VERTEX_POINT('',#81157); +#81157 = CARTESIAN_POINT('',(3.1,-3.85,1.93)); +#81158 = LINE('',#81159,#81160); +#81159 = CARTESIAN_POINT('',(1.15,-3.85,1.93)); +#81160 = VECTOR('',#81161,1.); +#81161 = DIRECTION('',(-1.,-0.,-0.)); +#81162 = ORIENTED_EDGE('',*,*,#81163,.F.); +#81163 = EDGE_CURVE('',#81164,#81156,#81166,.T.); +#81164 = VERTEX_POINT('',#81165); +#81165 = CARTESIAN_POINT('',(3.1,-3.85,2.95)); +#81166 = LINE('',#81167,#81168); +#81167 = CARTESIAN_POINT('',(3.1,-3.85,2.95)); +#81168 = VECTOR('',#81169,1.); +#81169 = DIRECTION('',(0.,0.,-1.)); +#81170 = ORIENTED_EDGE('',*,*,#81171,.F.); +#81171 = EDGE_CURVE('',#81148,#81164,#81172,.T.); +#81172 = LINE('',#81173,#81174); +#81173 = CARTESIAN_POINT('',(-3.47,-3.85,2.95)); +#81174 = VECTOR('',#81175,1.); +#81175 = DIRECTION('',(1.,0.,0.)); +#81176 = PLANE('',#81177); +#81177 = AXIS2_PLACEMENT_3D('',#81178,#81179,#81180); +#81178 = CARTESIAN_POINT('',(-3.47,-3.85,2.25)); +#81179 = DIRECTION('',(0.,1.,0.)); +#81180 = DIRECTION('',(0.,-0.,1.)); +#81181 = ADVANCED_FACE('',(#81182),#81234,.F.); +#81182 = FACE_BOUND('',#81183,.T.); +#81183 = EDGE_LOOP('',(#81184,#81194,#81202,#81210,#81219,#81227)); +#81184 = ORIENTED_EDGE('',*,*,#81185,.T.); +#81185 = EDGE_CURVE('',#81186,#81188,#81190,.T.); +#81186 = VERTEX_POINT('',#81187); +#81187 = CARTESIAN_POINT('',(-4.17,-3.68,-0.45)); +#81188 = VERTEX_POINT('',#81189); +#81189 = CARTESIAN_POINT('',(-4.17,-3.68,0.75)); +#81190 = LINE('',#81191,#81192); +#81191 = CARTESIAN_POINT('',(-4.17,-3.68,0.)); +#81192 = VECTOR('',#81193,1.); +#81193 = DIRECTION('',(0.,0.,1.)); +#81194 = ORIENTED_EDGE('',*,*,#81195,.T.); +#81195 = EDGE_CURVE('',#81188,#81196,#81198,.T.); +#81196 = VERTEX_POINT('',#81197); +#81197 = CARTESIAN_POINT('',(-4.17,-4.67,0.75)); +#81198 = LINE('',#81199,#81200); +#81199 = CARTESIAN_POINT('',(-4.17,5.199738091155,0.75)); +#81200 = VECTOR('',#81201,1.); +#81201 = DIRECTION('',(0.,-1.,0.)); +#81202 = ORIENTED_EDGE('',*,*,#81203,.T.); +#81203 = EDGE_CURVE('',#81196,#81204,#81206,.T.); +#81204 = VERTEX_POINT('',#81205); +#81205 = CARTESIAN_POINT('',(-4.17,-4.67,-0.45)); +#81206 = LINE('',#81207,#81208); +#81207 = CARTESIAN_POINT('',(-4.17,-4.67,0.)); +#81208 = VECTOR('',#81209,1.); +#81209 = DIRECTION('',(0.,0.,-1.)); +#81210 = ORIENTED_EDGE('',*,*,#81211,.T.); +#81211 = EDGE_CURVE('',#81204,#81212,#81214,.T.); +#81212 = VERTEX_POINT('',#81213); +#81213 = CARTESIAN_POINT('',(-4.17,-4.3,-0.82)); +#81214 = CIRCLE('',#81215,0.37); +#81215 = AXIS2_PLACEMENT_3D('',#81216,#81217,#81218); +#81216 = CARTESIAN_POINT('',(-4.17,-4.3,-0.45)); +#81217 = DIRECTION('',(1.,0.,-0.)); +#81218 = DIRECTION('',(0.,0.,1.)); +#81219 = ORIENTED_EDGE('',*,*,#81220,.T.); +#81220 = EDGE_CURVE('',#81212,#81221,#81223,.T.); +#81221 = VERTEX_POINT('',#81222); +#81222 = CARTESIAN_POINT('',(-4.17,-4.05,-0.82)); +#81223 = LINE('',#81224,#81225); +#81224 = CARTESIAN_POINT('',(-4.17,2.6,-0.82)); +#81225 = VECTOR('',#81226,1.); +#81226 = DIRECTION('',(-0.,1.,-0.)); +#81227 = ORIENTED_EDGE('',*,*,#81228,.T.); +#81228 = EDGE_CURVE('',#81221,#81186,#81229,.T.); +#81229 = CIRCLE('',#81230,0.37); +#81230 = AXIS2_PLACEMENT_3D('',#81231,#81232,#81233); +#81231 = CARTESIAN_POINT('',(-4.17,-4.05,-0.45)); +#81232 = DIRECTION('',(1.,0.,-0.)); +#81233 = DIRECTION('',(0.,0.,1.)); +#81234 = PLANE('',#81235); +#81235 = AXIS2_PLACEMENT_3D('',#81236,#81237,#81238); +#81236 = CARTESIAN_POINT('',(-4.17,2.6,0.)); +#81237 = DIRECTION('',(-1.,0.,0.)); +#81238 = DIRECTION('',(0.,0.,1.)); +#81239 = ADVANCED_FACE('',(#81240),#81402,.F.); +#81240 = FACE_BOUND('',#81241,.T.); +#81241 = EDGE_LOOP('',(#81242,#81252,#81260,#81268,#81277,#81286,#81294, + #81303,#81311,#81320,#81328,#81337,#81346,#81354,#81363,#81372, + #81380,#81388,#81396)); +#81242 = ORIENTED_EDGE('',*,*,#81243,.T.); +#81243 = EDGE_CURVE('',#81244,#81246,#81248,.T.); +#81244 = VERTEX_POINT('',#81245); +#81245 = CARTESIAN_POINT('',(-4.17,-1.45,2.25)); +#81246 = VERTEX_POINT('',#81247); +#81247 = CARTESIAN_POINT('',(-4.17,-1.45,1.05)); +#81248 = LINE('',#81249,#81250); +#81249 = CARTESIAN_POINT('',(-4.17,-1.45,1.05)); +#81250 = VECTOR('',#81251,1.); +#81251 = DIRECTION('',(-0.,-0.,-1.)); +#81252 = ORIENTED_EDGE('',*,*,#81253,.F.); +#81253 = EDGE_CURVE('',#81254,#81246,#81256,.T.); +#81254 = VERTEX_POINT('',#81255); +#81255 = CARTESIAN_POINT('',(-4.17,-1.43,1.05)); +#81256 = LINE('',#81257,#81258); +#81257 = CARTESIAN_POINT('',(-4.17,2.6,1.05)); +#81258 = VECTOR('',#81259,1.); +#81259 = DIRECTION('',(-0.,-1.,-0.)); +#81260 = ORIENTED_EDGE('',*,*,#81261,.T.); +#81261 = EDGE_CURVE('',#81254,#81262,#81264,.T.); +#81262 = VERTEX_POINT('',#81263); +#81263 = CARTESIAN_POINT('',(-4.17,-1.43,1.25)); +#81264 = LINE('',#81265,#81266); +#81265 = CARTESIAN_POINT('',(-4.17,-1.43,0.)); +#81266 = VECTOR('',#81267,1.); +#81267 = DIRECTION('',(0.,0.,1.)); +#81268 = ORIENTED_EDGE('',*,*,#81269,.T.); +#81269 = EDGE_CURVE('',#81262,#81270,#81272,.T.); +#81270 = VERTEX_POINT('',#81271); +#81271 = CARTESIAN_POINT('',(-4.17,-1.2,1.48)); +#81272 = CIRCLE('',#81273,0.23); +#81273 = AXIS2_PLACEMENT_3D('',#81274,#81275,#81276); +#81274 = CARTESIAN_POINT('',(-4.17,-1.2,1.25)); +#81275 = DIRECTION('',(-1.,0.,0.)); +#81276 = DIRECTION('',(0.,0.,1.)); +#81277 = ORIENTED_EDGE('',*,*,#81278,.T.); +#81278 = EDGE_CURVE('',#81270,#81279,#81281,.T.); +#81279 = VERTEX_POINT('',#81280); +#81280 = CARTESIAN_POINT('',(-4.17,-0.97,1.25)); +#81281 = CIRCLE('',#81282,0.23); +#81282 = AXIS2_PLACEMENT_3D('',#81283,#81284,#81285); +#81283 = CARTESIAN_POINT('',(-4.17,-1.2,1.25)); +#81284 = DIRECTION('',(-1.,0.,0.)); +#81285 = DIRECTION('',(0.,0.,1.)); +#81286 = ORIENTED_EDGE('',*,*,#81287,.T.); +#81287 = EDGE_CURVE('',#81279,#81288,#81290,.T.); +#81288 = VERTEX_POINT('',#81289); +#81289 = CARTESIAN_POINT('',(-4.17,-0.97,0.338402894381)); +#81290 = LINE('',#81291,#81292); +#81291 = CARTESIAN_POINT('',(-4.17,-0.97,0.)); +#81292 = VECTOR('',#81293,1.); +#81293 = DIRECTION('',(-0.,-0.,-1.)); +#81294 = ORIENTED_EDGE('',*,*,#81295,.T.); +#81295 = EDGE_CURVE('',#81288,#81296,#81298,.T.); +#81296 = VERTEX_POINT('',#81297); +#81297 = CARTESIAN_POINT('',(-4.17,-0.923941410033,0.272624410926)); +#81298 = CIRCLE('',#81299,7.E-02); +#81299 = AXIS2_PLACEMENT_3D('',#81300,#81301,#81302); +#81300 = CARTESIAN_POINT('',(-4.17,-0.9,0.338402894381)); +#81301 = DIRECTION('',(1.,0.,-0.)); +#81302 = DIRECTION('',(0.,0.,1.)); +#81303 = ORIENTED_EDGE('',*,*,#81304,.T.); +#81304 = EDGE_CURVE('',#81296,#81305,#81307,.T.); +#81305 = VERTEX_POINT('',#81306); +#81306 = CARTESIAN_POINT('',(-4.17,-0.455537381368,0.102139286881)); +#81307 = LINE('',#81308,#81309); +#81308 = CARTESIAN_POINT('',(-4.17,-0.455537381368,0.102139286881)); +#81309 = VECTOR('',#81310,1.); +#81310 = DIRECTION('',(-0.,0.939692620786,-0.342020143326)); +#81311 = ORIENTED_EDGE('',*,*,#81312,.T.); +#81312 = EDGE_CURVE('',#81305,#81313,#81315,.T.); +#81313 = VERTEX_POINT('',#81314); +#81314 = CARTESIAN_POINT('',(-4.17,-0.37,-2.002075382097E-02)); +#81315 = CIRCLE('',#81316,0.13); +#81316 = AXIS2_PLACEMENT_3D('',#81317,#81318,#81319); +#81317 = CARTESIAN_POINT('',(-4.17,-0.5,-2.002075382097E-02)); +#81318 = DIRECTION('',(-1.,0.,0.)); +#81319 = DIRECTION('',(0.,0.,1.)); +#81320 = ORIENTED_EDGE('',*,*,#81321,.T.); +#81321 = EDGE_CURVE('',#81313,#81322,#81324,.T.); +#81322 = VERTEX_POINT('',#81323); +#81323 = CARTESIAN_POINT('',(-4.17,-0.37,-0.45)); +#81324 = LINE('',#81325,#81326); +#81325 = CARTESIAN_POINT('',(-4.17,-0.37,-5.366800753803E-16)); +#81326 = VECTOR('',#81327,1.); +#81327 = DIRECTION('',(0.,1.807003620809E-16,-1.)); +#81328 = ORIENTED_EDGE('',*,*,#81329,.T.); +#81329 = EDGE_CURVE('',#81322,#81330,#81332,.T.); +#81330 = VERTEX_POINT('',#81331); +#81331 = CARTESIAN_POINT('',(-4.17,-1.355252715607E-18,-0.82)); +#81332 = CIRCLE('',#81333,0.37); +#81333 = AXIS2_PLACEMENT_3D('',#81334,#81335,#81336); +#81334 = CARTESIAN_POINT('',(-4.17,-1.807003620809E-17,-0.45)); +#81335 = DIRECTION('',(1.,0.,-0.)); +#81336 = DIRECTION('',(0.,0.,1.)); +#81337 = ORIENTED_EDGE('',*,*,#81338,.T.); +#81338 = EDGE_CURVE('',#81330,#81339,#81341,.T.); +#81339 = VERTEX_POINT('',#81340); +#81340 = CARTESIAN_POINT('',(-4.17,0.37,-0.45)); +#81341 = CIRCLE('',#81342,0.37); +#81342 = AXIS2_PLACEMENT_3D('',#81343,#81344,#81345); +#81343 = CARTESIAN_POINT('',(-4.17,0.,-0.45)); +#81344 = DIRECTION('',(1.,0.,-0.)); +#81345 = DIRECTION('',(0.,0.,1.)); +#81346 = ORIENTED_EDGE('',*,*,#81347,.T.); +#81347 = EDGE_CURVE('',#81339,#81348,#81350,.T.); +#81348 = VERTEX_POINT('',#81349); +#81349 = CARTESIAN_POINT('',(-4.17,0.37,1.25)); +#81350 = LINE('',#81351,#81352); +#81351 = CARTESIAN_POINT('',(-4.17,0.37,0.)); +#81352 = VECTOR('',#81353,1.); +#81353 = DIRECTION('',(0.,0.,1.)); +#81354 = ORIENTED_EDGE('',*,*,#81355,.T.); +#81355 = EDGE_CURVE('',#81348,#81356,#81358,.T.); +#81356 = VERTEX_POINT('',#81357); +#81357 = CARTESIAN_POINT('',(-4.17,0.6,1.48)); +#81358 = CIRCLE('',#81359,0.23); +#81359 = AXIS2_PLACEMENT_3D('',#81360,#81361,#81362); +#81360 = CARTESIAN_POINT('',(-4.17,0.6,1.25)); +#81361 = DIRECTION('',(-1.,0.,0.)); +#81362 = DIRECTION('',(0.,0.,1.)); +#81363 = ORIENTED_EDGE('',*,*,#81364,.T.); +#81364 = EDGE_CURVE('',#81356,#81365,#81367,.T.); +#81365 = VERTEX_POINT('',#81366); +#81366 = CARTESIAN_POINT('',(-4.17,0.83,1.25)); +#81367 = CIRCLE('',#81368,0.23); +#81368 = AXIS2_PLACEMENT_3D('',#81369,#81370,#81371); +#81369 = CARTESIAN_POINT('',(-4.17,0.6,1.25)); +#81370 = DIRECTION('',(-1.,0.,0.)); +#81371 = DIRECTION('',(0.,0.,1.)); +#81372 = ORIENTED_EDGE('',*,*,#81373,.T.); +#81373 = EDGE_CURVE('',#81365,#81374,#81376,.T.); +#81374 = VERTEX_POINT('',#81375); +#81375 = CARTESIAN_POINT('',(-4.17,0.83,1.05)); +#81376 = LINE('',#81377,#81378); +#81377 = CARTESIAN_POINT('',(-4.17,0.83,0.)); +#81378 = VECTOR('',#81379,1.); +#81379 = DIRECTION('',(0.,0.,-1.)); +#81380 = ORIENTED_EDGE('',*,*,#81381,.F.); +#81381 = EDGE_CURVE('',#81382,#81374,#81384,.T.); +#81382 = VERTEX_POINT('',#81383); +#81383 = CARTESIAN_POINT('',(-4.17,2.57,1.05)); +#81384 = LINE('',#81385,#81386); +#81385 = CARTESIAN_POINT('',(-4.17,2.6,1.05)); +#81386 = VECTOR('',#81387,1.); +#81387 = DIRECTION('',(-0.,-1.,-0.)); +#81388 = ORIENTED_EDGE('',*,*,#81389,.T.); +#81389 = EDGE_CURVE('',#81382,#81390,#81392,.T.); +#81390 = VERTEX_POINT('',#81391); +#81391 = CARTESIAN_POINT('',(-4.17,2.57,2.25)); +#81392 = LINE('',#81393,#81394); +#81393 = CARTESIAN_POINT('',(-4.17,2.57,0.)); +#81394 = VECTOR('',#81395,1.); +#81395 = DIRECTION('',(-0.,-0.,1.)); +#81396 = ORIENTED_EDGE('',*,*,#81397,.T.); +#81397 = EDGE_CURVE('',#81390,#81244,#81398,.T.); +#81398 = LINE('',#81399,#81400); +#81399 = CARTESIAN_POINT('',(-4.17,2.6,2.25)); +#81400 = VECTOR('',#81401,1.); +#81401 = DIRECTION('',(-0.,-1.,-0.)); +#81402 = PLANE('',#81403); +#81403 = AXIS2_PLACEMENT_3D('',#81404,#81405,#81406); +#81404 = CARTESIAN_POINT('',(-4.17,2.6,0.)); +#81405 = DIRECTION('',(-1.,0.,0.)); +#81406 = DIRECTION('',(0.,0.,1.)); +#81407 = ADVANCED_FACE('',(#81408),#81442,.F.); +#81408 = FACE_BOUND('',#81409,.T.); +#81409 = EDGE_LOOP('',(#81410,#81420,#81428,#81436)); +#81410 = ORIENTED_EDGE('',*,*,#81411,.T.); +#81411 = EDGE_CURVE('',#81412,#81414,#81416,.T.); +#81412 = VERTEX_POINT('',#81413); +#81413 = CARTESIAN_POINT('',(3.47,-1.45,2.95)); +#81414 = VERTEX_POINT('',#81415); +#81415 = CARTESIAN_POINT('',(-3.47,-1.45,2.95)); +#81416 = LINE('',#81417,#81418); +#81417 = CARTESIAN_POINT('',(-3.47,-1.45,2.95)); +#81418 = VECTOR('',#81419,1.); +#81419 = DIRECTION('',(-1.,-0.,0.)); +#81420 = ORIENTED_EDGE('',*,*,#81421,.F.); +#81421 = EDGE_CURVE('',#81422,#81414,#81424,.T.); +#81422 = VERTEX_POINT('',#81423); +#81423 = CARTESIAN_POINT('',(-3.47,2.57,2.95)); +#81424 = LINE('',#81425,#81426); +#81425 = CARTESIAN_POINT('',(-3.47,2.6,2.95)); +#81426 = VECTOR('',#81427,1.); +#81427 = DIRECTION('',(-0.,-1.,-0.)); +#81428 = ORIENTED_EDGE('',*,*,#81429,.T.); +#81429 = EDGE_CURVE('',#81422,#81430,#81432,.T.); +#81430 = VERTEX_POINT('',#81431); +#81431 = CARTESIAN_POINT('',(3.47,2.57,2.95)); +#81432 = LINE('',#81433,#81434); +#81433 = CARTESIAN_POINT('',(0.,2.57,2.95)); +#81434 = VECTOR('',#81435,1.); +#81435 = DIRECTION('',(1.,-0.,-0.)); +#81436 = ORIENTED_EDGE('',*,*,#81437,.T.); +#81437 = EDGE_CURVE('',#81430,#81412,#81438,.T.); +#81438 = LINE('',#81439,#81440); +#81439 = CARTESIAN_POINT('',(3.47,2.6,2.95)); +#81440 = VECTOR('',#81441,1.); +#81441 = DIRECTION('',(-0.,-1.,-0.)); +#81442 = PLANE('',#81443); +#81443 = AXIS2_PLACEMENT_3D('',#81444,#81445,#81446); +#81444 = CARTESIAN_POINT('',(0.,2.6,2.95)); +#81445 = DIRECTION('',(0.,-0.,1.)); +#81446 = DIRECTION('',(1.,0.,0.)); +#81447 = ADVANCED_FACE('',(#81448),#81610,.F.); +#81448 = FACE_BOUND('',#81449,.T.); +#81449 = EDGE_LOOP('',(#81450,#81460,#81468,#81476,#81484,#81492,#81501, + #81510,#81518,#81527,#81536,#81544,#81553,#81561,#81570,#81578, + #81587,#81596,#81604)); +#81450 = ORIENTED_EDGE('',*,*,#81451,.T.); +#81451 = EDGE_CURVE('',#81452,#81454,#81456,.T.); +#81452 = VERTEX_POINT('',#81453); +#81453 = CARTESIAN_POINT('',(4.17,-1.45,1.05)); +#81454 = VERTEX_POINT('',#81455); +#81455 = CARTESIAN_POINT('',(4.17,-1.45,2.25)); +#81456 = LINE('',#81457,#81458); +#81457 = CARTESIAN_POINT('',(4.17,-1.45,2.25)); +#81458 = VECTOR('',#81459,1.); +#81459 = DIRECTION('',(-0.,-0.,1.)); +#81460 = ORIENTED_EDGE('',*,*,#81461,.F.); +#81461 = EDGE_CURVE('',#81462,#81454,#81464,.T.); +#81462 = VERTEX_POINT('',#81463); +#81463 = CARTESIAN_POINT('',(4.17,2.57,2.25)); +#81464 = LINE('',#81465,#81466); +#81465 = CARTESIAN_POINT('',(4.17,2.6,2.25)); +#81466 = VECTOR('',#81467,1.); +#81467 = DIRECTION('',(-0.,-1.,-0.)); +#81468 = ORIENTED_EDGE('',*,*,#81469,.T.); +#81469 = EDGE_CURVE('',#81462,#81470,#81472,.T.); +#81470 = VERTEX_POINT('',#81471); +#81471 = CARTESIAN_POINT('',(4.17,2.57,1.05)); +#81472 = LINE('',#81473,#81474); +#81473 = CARTESIAN_POINT('',(4.17,2.57,0.)); +#81474 = VECTOR('',#81475,1.); +#81475 = DIRECTION('',(0.,-0.,-1.)); +#81476 = ORIENTED_EDGE('',*,*,#81477,.T.); +#81477 = EDGE_CURVE('',#81470,#81478,#81480,.T.); +#81478 = VERTEX_POINT('',#81479); +#81479 = CARTESIAN_POINT('',(4.17,0.83,1.05)); +#81480 = LINE('',#81481,#81482); +#81481 = CARTESIAN_POINT('',(4.17,2.6,1.05)); +#81482 = VECTOR('',#81483,1.); +#81483 = DIRECTION('',(-0.,-1.,-0.)); +#81484 = ORIENTED_EDGE('',*,*,#81485,.T.); +#81485 = EDGE_CURVE('',#81478,#81486,#81488,.T.); +#81486 = VERTEX_POINT('',#81487); +#81487 = CARTESIAN_POINT('',(4.17,0.83,1.25)); +#81488 = LINE('',#81489,#81490); +#81489 = CARTESIAN_POINT('',(4.17,0.83,0.)); +#81490 = VECTOR('',#81491,1.); +#81491 = DIRECTION('',(-0.,0.,1.)); +#81492 = ORIENTED_EDGE('',*,*,#81493,.T.); +#81493 = EDGE_CURVE('',#81486,#81494,#81496,.T.); +#81494 = VERTEX_POINT('',#81495); +#81495 = CARTESIAN_POINT('',(4.17,0.6,1.48)); +#81496 = CIRCLE('',#81497,0.23); +#81497 = AXIS2_PLACEMENT_3D('',#81498,#81499,#81500); +#81498 = CARTESIAN_POINT('',(4.17,0.6,1.25)); +#81499 = DIRECTION('',(1.,0.,0.)); +#81500 = DIRECTION('',(0.,0.,-1.)); +#81501 = ORIENTED_EDGE('',*,*,#81502,.T.); +#81502 = EDGE_CURVE('',#81494,#81503,#81505,.T.); +#81503 = VERTEX_POINT('',#81504); +#81504 = CARTESIAN_POINT('',(4.17,0.37,1.25)); +#81505 = CIRCLE('',#81506,0.23); +#81506 = AXIS2_PLACEMENT_3D('',#81507,#81508,#81509); +#81507 = CARTESIAN_POINT('',(4.17,0.6,1.25)); +#81508 = DIRECTION('',(1.,0.,0.)); +#81509 = DIRECTION('',(0.,0.,-1.)); +#81510 = ORIENTED_EDGE('',*,*,#81511,.T.); +#81511 = EDGE_CURVE('',#81503,#81512,#81514,.T.); +#81512 = VERTEX_POINT('',#81513); +#81513 = CARTESIAN_POINT('',(4.17,0.37,-0.45)); +#81514 = LINE('',#81515,#81516); +#81515 = CARTESIAN_POINT('',(4.17,0.37,0.)); +#81516 = VECTOR('',#81517,1.); +#81517 = DIRECTION('',(-0.,-0.,-1.)); +#81518 = ORIENTED_EDGE('',*,*,#81519,.T.); +#81519 = EDGE_CURVE('',#81512,#81520,#81522,.T.); +#81520 = VERTEX_POINT('',#81521); +#81521 = CARTESIAN_POINT('',(4.17,-1.355252715607E-18,-0.82)); +#81522 = CIRCLE('',#81523,0.37); +#81523 = AXIS2_PLACEMENT_3D('',#81524,#81525,#81526); +#81524 = CARTESIAN_POINT('',(4.17,0.,-0.45)); +#81525 = DIRECTION('',(-1.,-0.,-0.)); +#81526 = DIRECTION('',(0.,0.,-1.)); +#81527 = ORIENTED_EDGE('',*,*,#81528,.T.); +#81528 = EDGE_CURVE('',#81520,#81529,#81531,.T.); +#81529 = VERTEX_POINT('',#81530); +#81530 = CARTESIAN_POINT('',(4.17,-0.37,-0.45)); +#81531 = CIRCLE('',#81532,0.37); +#81532 = AXIS2_PLACEMENT_3D('',#81533,#81534,#81535); +#81533 = CARTESIAN_POINT('',(4.17,-1.807003620809E-17,-0.45)); +#81534 = DIRECTION('',(-1.,-0.,-0.)); +#81535 = DIRECTION('',(0.,0.,-1.)); +#81536 = ORIENTED_EDGE('',*,*,#81537,.T.); +#81537 = EDGE_CURVE('',#81529,#81538,#81540,.T.); +#81538 = VERTEX_POINT('',#81539); +#81539 = CARTESIAN_POINT('',(4.17,-0.37,-2.002075382097E-02)); +#81540 = LINE('',#81541,#81542); +#81541 = CARTESIAN_POINT('',(4.17,-0.37,-5.366800753803E-16)); +#81542 = VECTOR('',#81543,1.); +#81543 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#81544 = ORIENTED_EDGE('',*,*,#81545,.T.); +#81545 = EDGE_CURVE('',#81538,#81546,#81548,.T.); +#81546 = VERTEX_POINT('',#81547); +#81547 = CARTESIAN_POINT('',(4.17,-0.455537381368,0.102139286881)); +#81548 = CIRCLE('',#81549,0.13); +#81549 = AXIS2_PLACEMENT_3D('',#81550,#81551,#81552); +#81550 = CARTESIAN_POINT('',(4.17,-0.5,-2.002075382097E-02)); +#81551 = DIRECTION('',(1.,0.,0.)); +#81552 = DIRECTION('',(0.,0.,-1.)); +#81553 = ORIENTED_EDGE('',*,*,#81554,.T.); +#81554 = EDGE_CURVE('',#81546,#81555,#81557,.T.); +#81555 = VERTEX_POINT('',#81556); +#81556 = CARTESIAN_POINT('',(4.17,-0.923941410033,0.272624410926)); +#81557 = LINE('',#81558,#81559); +#81558 = CARTESIAN_POINT('',(4.17,-0.923941410033,0.272624410926)); +#81559 = VECTOR('',#81560,1.); +#81560 = DIRECTION('',(-0.,-0.939692620786,0.342020143326)); +#81561 = ORIENTED_EDGE('',*,*,#81562,.T.); +#81562 = EDGE_CURVE('',#81555,#81563,#81565,.T.); +#81563 = VERTEX_POINT('',#81564); +#81564 = CARTESIAN_POINT('',(4.17,-0.97,0.338402894381)); +#81565 = CIRCLE('',#81566,7.E-02); +#81566 = AXIS2_PLACEMENT_3D('',#81567,#81568,#81569); +#81567 = CARTESIAN_POINT('',(4.17,-0.9,0.338402894381)); +#81568 = DIRECTION('',(-1.,-0.,0.)); +#81569 = DIRECTION('',(0.,-1.548860246408E-15,-1.)); +#81570 = ORIENTED_EDGE('',*,*,#81571,.T.); +#81571 = EDGE_CURVE('',#81563,#81572,#81574,.T.); +#81572 = VERTEX_POINT('',#81573); +#81573 = CARTESIAN_POINT('',(4.17,-0.97,1.25)); +#81574 = LINE('',#81575,#81576); +#81575 = CARTESIAN_POINT('',(4.17,-0.97,0.)); +#81576 = VECTOR('',#81577,1.); +#81577 = DIRECTION('',(0.,0.,1.)); +#81578 = ORIENTED_EDGE('',*,*,#81579,.T.); +#81579 = EDGE_CURVE('',#81572,#81580,#81582,.T.); +#81580 = VERTEX_POINT('',#81581); +#81581 = CARTESIAN_POINT('',(4.17,-1.2,1.48)); +#81582 = CIRCLE('',#81583,0.23); +#81583 = AXIS2_PLACEMENT_3D('',#81584,#81585,#81586); +#81584 = CARTESIAN_POINT('',(4.17,-1.2,1.25)); +#81585 = DIRECTION('',(1.,0.,0.)); +#81586 = DIRECTION('',(0.,0.,-1.)); +#81587 = ORIENTED_EDGE('',*,*,#81588,.T.); +#81588 = EDGE_CURVE('',#81580,#81589,#81591,.T.); +#81589 = VERTEX_POINT('',#81590); +#81590 = CARTESIAN_POINT('',(4.17,-1.43,1.25)); +#81591 = CIRCLE('',#81592,0.23); +#81592 = AXIS2_PLACEMENT_3D('',#81593,#81594,#81595); +#81593 = CARTESIAN_POINT('',(4.17,-1.2,1.25)); +#81594 = DIRECTION('',(1.,0.,0.)); +#81595 = DIRECTION('',(0.,0.,-1.)); +#81596 = ORIENTED_EDGE('',*,*,#81597,.T.); +#81597 = EDGE_CURVE('',#81589,#81598,#81600,.T.); +#81598 = VERTEX_POINT('',#81599); +#81599 = CARTESIAN_POINT('',(4.17,-1.43,1.05)); +#81600 = LINE('',#81601,#81602); +#81601 = CARTESIAN_POINT('',(4.17,-1.43,0.)); +#81602 = VECTOR('',#81603,1.); +#81603 = DIRECTION('',(0.,0.,-1.)); +#81604 = ORIENTED_EDGE('',*,*,#81605,.T.); +#81605 = EDGE_CURVE('',#81598,#81452,#81606,.T.); +#81606 = LINE('',#81607,#81608); +#81607 = CARTESIAN_POINT('',(4.17,2.6,1.05)); +#81608 = VECTOR('',#81609,1.); +#81609 = DIRECTION('',(-0.,-1.,-0.)); +#81610 = PLANE('',#81611); +#81611 = AXIS2_PLACEMENT_3D('',#81612,#81613,#81614); +#81612 = CARTESIAN_POINT('',(4.17,2.6,0.)); +#81613 = DIRECTION('',(1.,0.,0.)); +#81614 = DIRECTION('',(0.,0.,-1.)); +#81615 = ADVANCED_FACE('',(#81616),#81750,.F.); +#81616 = FACE_BOUND('',#81617,.T.); +#81617 = EDGE_LOOP('',(#81618,#81628,#81636,#81644,#81653,#81661,#81670, + #81678,#81686,#81694,#81702,#81710,#81719,#81727,#81736,#81744)); +#81618 = ORIENTED_EDGE('',*,*,#81619,.T.); +#81619 = EDGE_CURVE('',#81620,#81622,#81624,.T.); +#81620 = VERTEX_POINT('',#81621); +#81621 = CARTESIAN_POINT('',(-3.47,-1.45,0.35)); +#81622 = VERTEX_POINT('',#81623); +#81623 = CARTESIAN_POINT('',(3.47,-1.45,0.35)); +#81624 = LINE('',#81625,#81626); +#81625 = CARTESIAN_POINT('',(3.47,-1.45,0.35)); +#81626 = VECTOR('',#81627,1.); +#81627 = DIRECTION('',(1.,-0.,-0.)); +#81628 = ORIENTED_EDGE('',*,*,#81629,.F.); +#81629 = EDGE_CURVE('',#81630,#81622,#81632,.T.); +#81630 = VERTEX_POINT('',#81631); +#81631 = CARTESIAN_POINT('',(3.47,-1.43,0.35)); +#81632 = LINE('',#81633,#81634); +#81633 = CARTESIAN_POINT('',(3.47,2.6,0.35)); +#81634 = VECTOR('',#81635,1.); +#81635 = DIRECTION('',(-0.,-1.,-0.)); +#81636 = ORIENTED_EDGE('',*,*,#81637,.T.); +#81637 = EDGE_CURVE('',#81630,#81638,#81640,.T.); +#81638 = VERTEX_POINT('',#81639); +#81639 = CARTESIAN_POINT('',(2.2,-1.43,0.35)); +#81640 = LINE('',#81641,#81642); +#81641 = CARTESIAN_POINT('',(1.805510229387E-16,-1.43,0.35)); +#81642 = VECTOR('',#81643,1.); +#81643 = DIRECTION('',(-1.,-4.480174266469E-17,0.)); +#81644 = ORIENTED_EDGE('',*,*,#81645,.T.); +#81645 = EDGE_CURVE('',#81638,#81646,#81648,.T.); +#81646 = VERTEX_POINT('',#81647); +#81647 = CARTESIAN_POINT('',(1.87,-1.1,0.35)); +#81648 = CIRCLE('',#81649,0.33); +#81649 = AXIS2_PLACEMENT_3D('',#81650,#81651,#81652); +#81650 = CARTESIAN_POINT('',(2.2,-1.1,0.35)); +#81651 = DIRECTION('',(0.,0.,-1.)); +#81652 = DIRECTION('',(-1.,0.,0.)); +#81653 = ORIENTED_EDGE('',*,*,#81654,.T.); +#81654 = EDGE_CURVE('',#81646,#81655,#81657,.T.); +#81655 = VERTEX_POINT('',#81656); +#81656 = CARTESIAN_POINT('',(1.87,0.5,0.35)); +#81657 = LINE('',#81658,#81659); +#81658 = CARTESIAN_POINT('',(1.87,2.6,0.35)); +#81659 = VECTOR('',#81660,1.); +#81660 = DIRECTION('',(0.,1.,0.)); +#81661 = ORIENTED_EDGE('',*,*,#81662,.T.); +#81662 = EDGE_CURVE('',#81655,#81663,#81665,.T.); +#81663 = VERTEX_POINT('',#81664); +#81664 = CARTESIAN_POINT('',(2.2,0.83,0.35)); +#81665 = CIRCLE('',#81666,0.33); +#81666 = AXIS2_PLACEMENT_3D('',#81667,#81668,#81669); +#81667 = CARTESIAN_POINT('',(2.2,0.5,0.35)); +#81668 = DIRECTION('',(0.,0.,-1.)); +#81669 = DIRECTION('',(-1.,0.,0.)); +#81670 = ORIENTED_EDGE('',*,*,#81671,.T.); +#81671 = EDGE_CURVE('',#81663,#81672,#81674,.T.); +#81672 = VERTEX_POINT('',#81673); +#81673 = CARTESIAN_POINT('',(3.47,0.83,0.35)); +#81674 = LINE('',#81675,#81676); +#81675 = CARTESIAN_POINT('',(0.,0.83,0.35)); +#81676 = VECTOR('',#81677,1.); +#81677 = DIRECTION('',(1.,0.,0.)); +#81678 = ORIENTED_EDGE('',*,*,#81679,.F.); +#81679 = EDGE_CURVE('',#81680,#81672,#81682,.T.); +#81680 = VERTEX_POINT('',#81681); +#81681 = CARTESIAN_POINT('',(3.47,2.57,0.35)); +#81682 = LINE('',#81683,#81684); +#81683 = CARTESIAN_POINT('',(3.47,2.6,0.35)); +#81684 = VECTOR('',#81685,1.); +#81685 = DIRECTION('',(-0.,-1.,-0.)); +#81686 = ORIENTED_EDGE('',*,*,#81687,.T.); +#81687 = EDGE_CURVE('',#81680,#81688,#81690,.T.); +#81688 = VERTEX_POINT('',#81689); +#81689 = CARTESIAN_POINT('',(-3.47,2.57,0.35)); +#81690 = LINE('',#81691,#81692); +#81691 = CARTESIAN_POINT('',(0.,2.57,0.35)); +#81692 = VECTOR('',#81693,1.); +#81693 = DIRECTION('',(-1.,-0.,-0.)); +#81694 = ORIENTED_EDGE('',*,*,#81695,.T.); +#81695 = EDGE_CURVE('',#81688,#81696,#81698,.T.); +#81696 = VERTEX_POINT('',#81697); +#81697 = CARTESIAN_POINT('',(-3.47,0.83,0.35)); +#81698 = LINE('',#81699,#81700); +#81699 = CARTESIAN_POINT('',(-3.47,2.6,0.35)); +#81700 = VECTOR('',#81701,1.); +#81701 = DIRECTION('',(-0.,-1.,-0.)); +#81702 = ORIENTED_EDGE('',*,*,#81703,.T.); +#81703 = EDGE_CURVE('',#81696,#81704,#81706,.T.); +#81704 = VERTEX_POINT('',#81705); +#81705 = CARTESIAN_POINT('',(-2.2,0.83,0.35)); +#81706 = LINE('',#81707,#81708); +#81707 = CARTESIAN_POINT('',(0.,0.83,0.35)); +#81708 = VECTOR('',#81709,1.); +#81709 = DIRECTION('',(1.,-0.,0.)); +#81710 = ORIENTED_EDGE('',*,*,#81711,.T.); +#81711 = EDGE_CURVE('',#81704,#81712,#81714,.T.); +#81712 = VERTEX_POINT('',#81713); +#81713 = CARTESIAN_POINT('',(-1.87,0.5,0.35)); +#81714 = CIRCLE('',#81715,0.33); +#81715 = AXIS2_PLACEMENT_3D('',#81716,#81717,#81718); +#81716 = CARTESIAN_POINT('',(-2.2,0.5,0.35)); +#81717 = DIRECTION('',(0.,0.,-1.)); +#81718 = DIRECTION('',(-1.,0.,0.)); +#81719 = ORIENTED_EDGE('',*,*,#81720,.T.); +#81720 = EDGE_CURVE('',#81712,#81721,#81723,.T.); +#81721 = VERTEX_POINT('',#81722); +#81722 = CARTESIAN_POINT('',(-1.87,-1.1,0.35)); +#81723 = LINE('',#81724,#81725); +#81724 = CARTESIAN_POINT('',(-1.87,2.6,0.35)); +#81725 = VECTOR('',#81726,1.); +#81726 = DIRECTION('',(-5.421010862428E-16,-1.,0.)); +#81727 = ORIENTED_EDGE('',*,*,#81728,.T.); +#81728 = EDGE_CURVE('',#81721,#81729,#81731,.T.); +#81729 = VERTEX_POINT('',#81730); +#81730 = CARTESIAN_POINT('',(-2.2,-1.43,0.35)); +#81731 = CIRCLE('',#81732,0.33); +#81732 = AXIS2_PLACEMENT_3D('',#81733,#81734,#81735); +#81733 = CARTESIAN_POINT('',(-2.2,-1.1,0.35)); +#81734 = DIRECTION('',(0.,0.,-1.)); +#81735 = DIRECTION('',(-1.,0.,0.)); +#81736 = ORIENTED_EDGE('',*,*,#81737,.T.); +#81737 = EDGE_CURVE('',#81729,#81738,#81740,.T.); +#81738 = VERTEX_POINT('',#81739); +#81739 = CARTESIAN_POINT('',(-3.47,-1.43,0.35)); +#81740 = LINE('',#81741,#81742); +#81741 = CARTESIAN_POINT('',(-1.263857160571E-15,-1.43,0.35)); +#81742 = VECTOR('',#81743,1.); +#81743 = DIRECTION('',(-1.,3.136121986528E-16,0.)); +#81744 = ORIENTED_EDGE('',*,*,#81745,.T.); +#81745 = EDGE_CURVE('',#81738,#81620,#81746,.T.); +#81746 = LINE('',#81747,#81748); +#81747 = CARTESIAN_POINT('',(-3.47,2.6,0.35)); +#81748 = VECTOR('',#81749,1.); +#81749 = DIRECTION('',(-0.,-1.,-0.)); +#81750 = PLANE('',#81751); +#81751 = AXIS2_PLACEMENT_3D('',#81752,#81753,#81754); +#81752 = CARTESIAN_POINT('',(0.,2.6,0.35)); +#81753 = DIRECTION('',(0.,0.,-1.)); +#81754 = DIRECTION('',(-1.,0.,-0.)); +#81755 = ADVANCED_FACE('',(#81756),#81790,.F.); +#81756 = FACE_BOUND('',#81757,.T.); +#81757 = EDGE_LOOP('',(#81758,#81768,#81776,#81784)); +#81758 = ORIENTED_EDGE('',*,*,#81759,.F.); +#81759 = EDGE_CURVE('',#81760,#81762,#81764,.T.); +#81760 = VERTEX_POINT('',#81761); +#81761 = CARTESIAN_POINT('',(1.235016269382,-4.7,3.22)); +#81762 = VERTEX_POINT('',#81763); +#81763 = CARTESIAN_POINT('',(1.235016269382,-4.7,2.98)); +#81764 = LINE('',#81765,#81766); +#81765 = CARTESIAN_POINT('',(1.235016269382,-4.7,3.25)); +#81766 = VECTOR('',#81767,1.); +#81767 = DIRECTION('',(0.,0.,-1.)); +#81768 = ORIENTED_EDGE('',*,*,#81769,.T.); +#81769 = EDGE_CURVE('',#81760,#81770,#81772,.T.); +#81770 = VERTEX_POINT('',#81771); +#81771 = CARTESIAN_POINT('',(-1.235016269382,-4.7,3.22)); +#81772 = LINE('',#81773,#81774); +#81773 = CARTESIAN_POINT('',(-4.47,-4.7,3.22)); +#81774 = VECTOR('',#81775,1.); +#81775 = DIRECTION('',(-1.,0.,-0.)); +#81776 = ORIENTED_EDGE('',*,*,#81777,.T.); +#81777 = EDGE_CURVE('',#81770,#81778,#81780,.T.); +#81778 = VERTEX_POINT('',#81779); +#81779 = CARTESIAN_POINT('',(-1.235016269382,-4.7,2.98)); +#81780 = LINE('',#81781,#81782); +#81781 = CARTESIAN_POINT('',(-1.235016269382,-4.7,3.25)); +#81782 = VECTOR('',#81783,1.); +#81783 = DIRECTION('',(0.,0.,-1.)); +#81784 = ORIENTED_EDGE('',*,*,#81785,.T.); +#81785 = EDGE_CURVE('',#81778,#81762,#81786,.T.); +#81786 = LINE('',#81787,#81788); +#81787 = CARTESIAN_POINT('',(-4.47,-4.7,2.98)); +#81788 = VECTOR('',#81789,1.); +#81789 = DIRECTION('',(1.,-0.,-0.)); +#81790 = PLANE('',#81791); +#81791 = AXIS2_PLACEMENT_3D('',#81792,#81793,#81794); +#81792 = CARTESIAN_POINT('',(-4.47,-4.7,3.25)); +#81793 = DIRECTION('',(0.,1.,0.)); +#81794 = DIRECTION('',(0.,-0.,1.)); +#81795 = ADVANCED_FACE('',(#81796),#81864,.F.); +#81796 = FACE_BOUND('',#81797,.T.); +#81797 = EDGE_LOOP('',(#81798,#81808,#81816,#81825,#81833,#81841,#81849, + #81858)); +#81798 = ORIENTED_EDGE('',*,*,#81799,.T.); +#81799 = EDGE_CURVE('',#81800,#81802,#81804,.T.); +#81800 = VERTEX_POINT('',#81801); +#81801 = CARTESIAN_POINT('',(-3.25,-4.7,2.98)); +#81802 = VERTEX_POINT('',#81803); +#81803 = CARTESIAN_POINT('',(-3.25,-4.7,3.22)); +#81804 = LINE('',#81805,#81806); +#81805 = CARTESIAN_POINT('',(-3.25,-4.7,3.25)); +#81806 = VECTOR('',#81807,1.); +#81807 = DIRECTION('',(0.,-0.,1.)); +#81808 = ORIENTED_EDGE('',*,*,#81809,.T.); +#81809 = EDGE_CURVE('',#81802,#81810,#81812,.T.); +#81810 = VERTEX_POINT('',#81811); +#81811 = CARTESIAN_POINT('',(-3.47,-4.7,3.22)); +#81812 = LINE('',#81813,#81814); +#81813 = CARTESIAN_POINT('',(-4.47,-4.7,3.22)); +#81814 = VECTOR('',#81815,1.); +#81815 = DIRECTION('',(-1.,0.,-0.)); +#81816 = ORIENTED_EDGE('',*,*,#81817,.T.); +#81817 = EDGE_CURVE('',#81810,#81818,#81820,.T.); +#81818 = VERTEX_POINT('',#81819); +#81819 = CARTESIAN_POINT('',(-4.44,-4.7,2.25)); +#81820 = CIRCLE('',#81821,0.97); +#81821 = AXIS2_PLACEMENT_3D('',#81822,#81823,#81824); +#81822 = CARTESIAN_POINT('',(-3.47,-4.7,2.25)); +#81823 = DIRECTION('',(0.,-1.,0.)); +#81824 = DIRECTION('',(0.,0.,1.)); +#81825 = ORIENTED_EDGE('',*,*,#81826,.T.); +#81826 = EDGE_CURVE('',#81818,#81827,#81829,.T.); +#81827 = VERTEX_POINT('',#81828); +#81828 = CARTESIAN_POINT('',(-4.44,-4.7,-0.45)); +#81829 = LINE('',#81830,#81831); +#81830 = CARTESIAN_POINT('',(-4.44,-4.7,3.25)); +#81831 = VECTOR('',#81832,1.); +#81832 = DIRECTION('',(0.,0.,-1.)); +#81833 = ORIENTED_EDGE('',*,*,#81834,.T.); +#81834 = EDGE_CURVE('',#81827,#81835,#81837,.T.); +#81835 = VERTEX_POINT('',#81836); +#81836 = CARTESIAN_POINT('',(-4.2,-4.7,-0.45)); +#81837 = LINE('',#81838,#81839); +#81838 = CARTESIAN_POINT('',(-4.47,-4.7,-0.45)); +#81839 = VECTOR('',#81840,1.); +#81840 = DIRECTION('',(1.,-0.,-0.)); +#81841 = ORIENTED_EDGE('',*,*,#81842,.T.); +#81842 = EDGE_CURVE('',#81835,#81843,#81845,.T.); +#81843 = VERTEX_POINT('',#81844); +#81844 = CARTESIAN_POINT('',(-4.2,-4.7,2.25)); +#81845 = LINE('',#81846,#81847); +#81846 = CARTESIAN_POINT('',(-4.2,-4.7,3.25)); +#81847 = VECTOR('',#81848,1.); +#81848 = DIRECTION('',(-0.,-0.,1.)); +#81849 = ORIENTED_EDGE('',*,*,#81850,.T.); +#81850 = EDGE_CURVE('',#81843,#81851,#81853,.T.); +#81851 = VERTEX_POINT('',#81852); +#81852 = CARTESIAN_POINT('',(-3.47,-4.7,2.98)); +#81853 = CIRCLE('',#81854,0.73); +#81854 = AXIS2_PLACEMENT_3D('',#81855,#81856,#81857); +#81855 = CARTESIAN_POINT('',(-3.47,-4.7,2.25)); +#81856 = DIRECTION('',(0.,1.,0.)); +#81857 = DIRECTION('',(0.,-0.,1.)); +#81858 = ORIENTED_EDGE('',*,*,#81859,.T.); +#81859 = EDGE_CURVE('',#81851,#81800,#81860,.T.); +#81860 = LINE('',#81861,#81862); +#81861 = CARTESIAN_POINT('',(-4.47,-4.7,2.98)); +#81862 = VECTOR('',#81863,1.); +#81863 = DIRECTION('',(1.,-0.,-0.)); +#81864 = PLANE('',#81865); +#81865 = AXIS2_PLACEMENT_3D('',#81866,#81867,#81868); +#81866 = CARTESIAN_POINT('',(-4.47,-4.7,3.25)); +#81867 = DIRECTION('',(0.,1.,0.)); +#81868 = DIRECTION('',(0.,-0.,1.)); +#81869 = ADVANCED_FACE('',(#81870),#81904,.T.); +#81870 = FACE_BOUND('',#81871,.T.); +#81871 = EDGE_LOOP('',(#81872,#81882,#81890,#81898)); +#81872 = ORIENTED_EDGE('',*,*,#81873,.T.); +#81873 = EDGE_CURVE('',#81874,#81876,#81878,.T.); +#81874 = VERTEX_POINT('',#81875); +#81875 = CARTESIAN_POINT('',(-4.2,-3.45,1.45)); +#81876 = VERTEX_POINT('',#81877); +#81877 = CARTESIAN_POINT('',(-4.44,-3.45,1.45)); +#81878 = LINE('',#81879,#81880); +#81879 = CARTESIAN_POINT('',(-9.974659986867E-15,-3.45,1.45)); +#81880 = VECTOR('',#81881,1.); +#81881 = DIRECTION('',(-1.,2.891205793295E-15,-0.)); +#81882 = ORIENTED_EDGE('',*,*,#81883,.T.); +#81883 = EDGE_CURVE('',#81876,#81884,#81886,.T.); +#81884 = VERTEX_POINT('',#81885); +#81885 = CARTESIAN_POINT('',(-4.44,-3.4,1.45)); +#81886 = LINE('',#81887,#81888); +#81887 = CARTESIAN_POINT('',(-4.44,-3.4,1.45)); +#81888 = VECTOR('',#81889,1.); +#81889 = DIRECTION('',(-0.,1.,-0.)); +#81890 = ORIENTED_EDGE('',*,*,#81891,.T.); +#81891 = EDGE_CURVE('',#81884,#81892,#81894,.T.); +#81892 = VERTEX_POINT('',#81893); +#81893 = CARTESIAN_POINT('',(-4.2,-3.4,1.45)); +#81894 = LINE('',#81895,#81896); +#81895 = CARTESIAN_POINT('',(0.,-3.4,1.45)); +#81896 = VECTOR('',#81897,1.); +#81897 = DIRECTION('',(1.,-0.,-0.)); +#81898 = ORIENTED_EDGE('',*,*,#81899,.T.); +#81899 = EDGE_CURVE('',#81892,#81874,#81900,.T.); +#81900 = LINE('',#81901,#81902); +#81901 = CARTESIAN_POINT('',(-4.2,-3.45,1.45)); +#81902 = VECTOR('',#81903,1.); +#81903 = DIRECTION('',(0.,-1.,0.)); +#81904 = PLANE('',#81905); +#81905 = AXIS2_PLACEMENT_3D('',#81906,#81907,#81908); +#81906 = CARTESIAN_POINT('',(0.,0.,1.45)); +#81907 = DIRECTION('',(0.,0.,-1.)); +#81908 = DIRECTION('',(-1.,0.,-0.)); +#81909 = ADVANCED_FACE('',(#81910),#81944,.T.); +#81910 = FACE_BOUND('',#81911,.T.); +#81911 = EDGE_LOOP('',(#81912,#81922,#81930,#81938)); +#81912 = ORIENTED_EDGE('',*,*,#81913,.T.); +#81913 = EDGE_CURVE('',#81914,#81916,#81918,.T.); +#81914 = VERTEX_POINT('',#81915); +#81915 = CARTESIAN_POINT('',(4.2,-3.4,1.45)); +#81916 = VERTEX_POINT('',#81917); +#81917 = CARTESIAN_POINT('',(4.44,-3.4,1.45)); +#81918 = LINE('',#81919,#81920); +#81919 = CARTESIAN_POINT('',(0.,-3.4,1.45)); +#81920 = VECTOR('',#81921,1.); +#81921 = DIRECTION('',(1.,-0.,-0.)); +#81922 = ORIENTED_EDGE('',*,*,#81923,.T.); +#81923 = EDGE_CURVE('',#81916,#81924,#81926,.T.); +#81924 = VERTEX_POINT('',#81925); +#81925 = CARTESIAN_POINT('',(4.44,-3.45,1.45)); +#81926 = LINE('',#81927,#81928); +#81927 = CARTESIAN_POINT('',(4.44,-3.45,1.45)); +#81928 = VECTOR('',#81929,1.); +#81929 = DIRECTION('',(0.,-1.,-0.)); +#81930 = ORIENTED_EDGE('',*,*,#81931,.T.); +#81931 = EDGE_CURVE('',#81924,#81932,#81934,.T.); +#81932 = VERTEX_POINT('',#81933); +#81933 = CARTESIAN_POINT('',(4.2,-3.45,1.45)); +#81934 = LINE('',#81935,#81936); +#81935 = CARTESIAN_POINT('',(4.987329993433E-15,-3.45,1.45)); +#81936 = VECTOR('',#81937,1.); +#81937 = DIRECTION('',(-1.,-1.445602896647E-15,-0.)); +#81938 = ORIENTED_EDGE('',*,*,#81939,.T.); +#81939 = EDGE_CURVE('',#81932,#81914,#81940,.T.); +#81940 = LINE('',#81941,#81942); +#81941 = CARTESIAN_POINT('',(4.2,-3.4,1.45)); +#81942 = VECTOR('',#81943,1.); +#81943 = DIRECTION('',(-0.,1.,0.)); +#81944 = PLANE('',#81945); +#81945 = AXIS2_PLACEMENT_3D('',#81946,#81947,#81948); +#81946 = CARTESIAN_POINT('',(0.,0.,1.45)); +#81947 = DIRECTION('',(0.,0.,-1.)); +#81948 = DIRECTION('',(-1.,0.,-0.)); +#81949 = ADVANCED_FACE('',(#81950),#81977,.T.); +#81950 = FACE_BOUND('',#81951,.T.); +#81951 = EDGE_LOOP('',(#81952,#81962,#81969,#81970)); +#81952 = ORIENTED_EDGE('',*,*,#81953,.F.); +#81953 = EDGE_CURVE('',#81954,#81956,#81958,.T.); +#81954 = VERTEX_POINT('',#81955); +#81955 = CARTESIAN_POINT('',(-4.47,-1.43,1.05)); +#81956 = VERTEX_POINT('',#81957); +#81957 = CARTESIAN_POINT('',(-4.47,-3.17,1.05)); +#81958 = LINE('',#81959,#81960); +#81959 = CARTESIAN_POINT('',(-4.47,2.6,1.05)); +#81960 = VECTOR('',#81961,1.); +#81961 = DIRECTION('',(-0.,-1.,-0.)); +#81962 = ORIENTED_EDGE('',*,*,#81963,.T.); +#81963 = EDGE_CURVE('',#81954,#79725,#81964,.T.); +#81964 = CIRCLE('',#81965,1.); +#81965 = AXIS2_PLACEMENT_3D('',#81966,#81967,#81968); +#81966 = CARTESIAN_POINT('',(-3.47,-1.43,1.05)); +#81967 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#81968 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#81969 = ORIENTED_EDGE('',*,*,#79724,.T.); +#81970 = ORIENTED_EDGE('',*,*,#81971,.T.); +#81971 = EDGE_CURVE('',#79717,#81956,#81972,.T.); +#81972 = CIRCLE('',#81973,1.); +#81973 = AXIS2_PLACEMENT_3D('',#81974,#81975,#81976); +#81974 = CARTESIAN_POINT('',(-3.47,-3.17,1.05)); +#81975 = DIRECTION('',(0.,1.,-0.)); +#81976 = DIRECTION('',(0.,0.,1.)); +#81977 = CYLINDRICAL_SURFACE('',#81978,1.); +#81978 = AXIS2_PLACEMENT_3D('',#81979,#81980,#81981); +#81979 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#81980 = DIRECTION('',(-0.,-1.,-0.)); +#81981 = DIRECTION('',(0.,0.,-1.)); +#81982 = ADVANCED_FACE('',(#81983),#82001,.F.); +#81983 = FACE_BOUND('',#81984,.F.); +#81984 = EDGE_LOOP('',(#81985,#81986,#81993,#81994)); +#81985 = ORIENTED_EDGE('',*,*,#81253,.F.); +#81986 = ORIENTED_EDGE('',*,*,#81987,.F.); +#81987 = EDGE_CURVE('',#81738,#81254,#81988,.T.); +#81988 = CIRCLE('',#81989,0.7); +#81989 = AXIS2_PLACEMENT_3D('',#81990,#81991,#81992); +#81990 = CARTESIAN_POINT('',(-3.47,-1.43,1.05)); +#81991 = DIRECTION('',(3.136121986528E-16,1.,0.)); +#81992 = DIRECTION('',(1.,-3.136121986528E-16,9.293161478447E-16)); +#81993 = ORIENTED_EDGE('',*,*,#81745,.T.); +#81994 = ORIENTED_EDGE('',*,*,#81995,.F.); +#81995 = EDGE_CURVE('',#81246,#81620,#81996,.T.); +#81996 = CIRCLE('',#81997,0.7); +#81997 = AXIS2_PLACEMENT_3D('',#81998,#81999,#82000); +#81998 = CARTESIAN_POINT('',(-3.47,-1.45,1.05)); +#81999 = DIRECTION('',(0.,-1.,0.)); +#82000 = DIRECTION('',(0.,0.,1.)); +#82001 = CYLINDRICAL_SURFACE('',#82002,0.7); +#82002 = AXIS2_PLACEMENT_3D('',#82003,#82004,#82005); +#82003 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#82004 = DIRECTION('',(-0.,-1.,-0.)); +#82005 = DIRECTION('',(0.,0.,-1.)); +#82006 = ADVANCED_FACE('',(#82007),#82075,.F.); +#82007 = FACE_BOUND('',#82008,.T.); +#82008 = EDGE_LOOP('',(#82009,#82019,#82027,#82036,#82044,#82052,#82060, + #82069)); +#82009 = ORIENTED_EDGE('',*,*,#82010,.T.); +#82010 = EDGE_CURVE('',#82011,#82013,#82015,.T.); +#82011 = VERTEX_POINT('',#82012); +#82012 = CARTESIAN_POINT('',(4.2,-4.7,-0.45)); +#82013 = VERTEX_POINT('',#82014); +#82014 = CARTESIAN_POINT('',(4.44,-4.7,-0.45)); +#82015 = LINE('',#82016,#82017); +#82016 = CARTESIAN_POINT('',(-4.47,-4.7,-0.45)); +#82017 = VECTOR('',#82018,1.); +#82018 = DIRECTION('',(1.,-0.,-0.)); +#82019 = ORIENTED_EDGE('',*,*,#82020,.T.); +#82020 = EDGE_CURVE('',#82013,#82021,#82023,.T.); +#82021 = VERTEX_POINT('',#82022); +#82022 = CARTESIAN_POINT('',(4.44,-4.7,2.25)); +#82023 = LINE('',#82024,#82025); +#82024 = CARTESIAN_POINT('',(4.44,-4.7,3.25)); +#82025 = VECTOR('',#82026,1.); +#82026 = DIRECTION('',(-0.,-0.,1.)); +#82027 = ORIENTED_EDGE('',*,*,#82028,.T.); +#82028 = EDGE_CURVE('',#82021,#82029,#82031,.T.); +#82029 = VERTEX_POINT('',#82030); +#82030 = CARTESIAN_POINT('',(3.47,-4.7,3.22)); +#82031 = CIRCLE('',#82032,0.97); +#82032 = AXIS2_PLACEMENT_3D('',#82033,#82034,#82035); +#82033 = CARTESIAN_POINT('',(3.47,-4.7,2.25)); +#82034 = DIRECTION('',(-0.,-1.,0.)); +#82035 = DIRECTION('',(2.146049661002E-14,-0.,1.)); +#82036 = ORIENTED_EDGE('',*,*,#82037,.T.); +#82037 = EDGE_CURVE('',#82029,#82038,#82040,.T.); +#82038 = VERTEX_POINT('',#82039); +#82039 = CARTESIAN_POINT('',(3.25,-4.7,3.22)); +#82040 = LINE('',#82041,#82042); +#82041 = CARTESIAN_POINT('',(-4.47,-4.7,3.22)); +#82042 = VECTOR('',#82043,1.); +#82043 = DIRECTION('',(-1.,0.,-0.)); +#82044 = ORIENTED_EDGE('',*,*,#82045,.T.); +#82045 = EDGE_CURVE('',#82038,#82046,#82048,.T.); +#82046 = VERTEX_POINT('',#82047); +#82047 = CARTESIAN_POINT('',(3.25,-4.7,2.98)); +#82048 = LINE('',#82049,#82050); +#82049 = CARTESIAN_POINT('',(3.25,-4.7,3.25)); +#82050 = VECTOR('',#82051,1.); +#82051 = DIRECTION('',(-0.,-0.,-1.)); +#82052 = ORIENTED_EDGE('',*,*,#82053,.T.); +#82053 = EDGE_CURVE('',#82046,#82054,#82056,.T.); +#82054 = VERTEX_POINT('',#82055); +#82055 = CARTESIAN_POINT('',(3.47,-4.7,2.98)); +#82056 = LINE('',#82057,#82058); +#82057 = CARTESIAN_POINT('',(-4.47,-4.7,2.98)); +#82058 = VECTOR('',#82059,1.); +#82059 = DIRECTION('',(1.,-0.,-0.)); +#82060 = ORIENTED_EDGE('',*,*,#82061,.T.); +#82061 = EDGE_CURVE('',#82054,#82062,#82064,.T.); +#82062 = VERTEX_POINT('',#82063); +#82063 = CARTESIAN_POINT('',(4.2,-4.7,2.25)); +#82064 = CIRCLE('',#82065,0.73); +#82065 = AXIS2_PLACEMENT_3D('',#82066,#82067,#82068); +#82066 = CARTESIAN_POINT('',(3.47,-4.7,2.25)); +#82067 = DIRECTION('',(0.,1.,0.)); +#82068 = DIRECTION('',(0.,-0.,1.)); +#82069 = ORIENTED_EDGE('',*,*,#82070,.T.); +#82070 = EDGE_CURVE('',#82062,#82011,#82071,.T.); +#82071 = LINE('',#82072,#82073); +#82072 = CARTESIAN_POINT('',(4.2,-4.7,3.25)); +#82073 = VECTOR('',#82074,1.); +#82074 = DIRECTION('',(-0.,0.,-1.)); +#82075 = PLANE('',#82076); +#82076 = AXIS2_PLACEMENT_3D('',#82077,#82078,#82079); +#82077 = CARTESIAN_POINT('',(-4.47,-4.7,3.25)); +#82078 = DIRECTION('',(0.,1.,0.)); +#82079 = DIRECTION('',(0.,-0.,1.)); +#82080 = ADVANCED_FACE('',(#82081),#82099,.F.); +#82081 = FACE_BOUND('',#82082,.F.); +#82082 = EDGE_LOOP('',(#82083,#82090,#82091,#82098)); +#82083 = ORIENTED_EDGE('',*,*,#82084,.F.); +#82084 = EDGE_CURVE('',#81470,#81680,#82085,.T.); +#82085 = CIRCLE('',#82086,0.7); +#82086 = AXIS2_PLACEMENT_3D('',#82087,#82088,#82089); +#82087 = CARTESIAN_POINT('',(3.47,2.57,1.05)); +#82088 = DIRECTION('',(-0.,1.,0.)); +#82089 = DIRECTION('',(2.84990285339E-14,0.,-1.)); +#82090 = ORIENTED_EDGE('',*,*,#81477,.T.); +#82091 = ORIENTED_EDGE('',*,*,#82092,.F.); +#82092 = EDGE_CURVE('',#81672,#81478,#82093,.T.); +#82093 = CIRCLE('',#82094,0.7); +#82094 = AXIS2_PLACEMENT_3D('',#82095,#82096,#82097); +#82095 = CARTESIAN_POINT('',(3.47,0.83,1.05)); +#82096 = DIRECTION('',(-0.,-1.,0.)); +#82097 = DIRECTION('',(-6.195440985631E-16,0.,1.)); +#82098 = ORIENTED_EDGE('',*,*,#81679,.F.); +#82099 = CYLINDRICAL_SURFACE('',#82100,0.7); +#82100 = AXIS2_PLACEMENT_3D('',#82101,#82102,#82103); +#82101 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#82102 = DIRECTION('',(-0.,-1.,-0.)); +#82103 = DIRECTION('',(0.,0.,-1.)); +#82104 = ADVANCED_FACE('',(#82105),#82132,.T.); +#82105 = FACE_BOUND('',#82106,.T.); +#82106 = EDGE_LOOP('',(#82107,#82117,#82124,#82125)); +#82107 = ORIENTED_EDGE('',*,*,#82108,.T.); +#82108 = EDGE_CURVE('',#82109,#82111,#82113,.T.); +#82109 = VERTEX_POINT('',#82110); +#82110 = CARTESIAN_POINT('',(4.47,2.57,1.05)); +#82111 = VERTEX_POINT('',#82112); +#82112 = CARTESIAN_POINT('',(4.47,0.83,1.05)); +#82113 = LINE('',#82114,#82115); +#82114 = CARTESIAN_POINT('',(4.47,2.6,1.05)); +#82115 = VECTOR('',#82116,1.); +#82116 = DIRECTION('',(-0.,-1.,-0.)); +#82117 = ORIENTED_EDGE('',*,*,#82118,.T.); +#82118 = EDGE_CURVE('',#82111,#79791,#82119,.T.); +#82119 = CIRCLE('',#82120,1.); +#82120 = AXIS2_PLACEMENT_3D('',#82121,#82122,#82123); +#82121 = CARTESIAN_POINT('',(3.47,0.83,1.05)); +#82122 = DIRECTION('',(0.,1.,-0.)); +#82123 = DIRECTION('',(0.,0.,1.)); +#82124 = ORIENTED_EDGE('',*,*,#79790,.F.); +#82125 = ORIENTED_EDGE('',*,*,#82126,.T.); +#82126 = EDGE_CURVE('',#79783,#82109,#82127,.T.); +#82127 = CIRCLE('',#82128,1.); +#82128 = AXIS2_PLACEMENT_3D('',#82129,#82130,#82131); +#82129 = CARTESIAN_POINT('',(3.47,2.57,1.05)); +#82130 = DIRECTION('',(0.,-1.,0.)); +#82131 = DIRECTION('',(0.,0.,-1.)); +#82132 = CYLINDRICAL_SURFACE('',#82133,1.); +#82133 = AXIS2_PLACEMENT_3D('',#82134,#82135,#82136); +#82134 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#82135 = DIRECTION('',(-0.,-1.,-0.)); +#82136 = DIRECTION('',(0.,0.,-1.)); +#82137 = ADVANCED_FACE('',(#82138,#82208),#82278,.F.); +#82138 = FACE_BOUND('',#82139,.T.); +#82139 = EDGE_LOOP('',(#82140,#82151,#82159,#82168,#82176,#82185,#82193, + #82202)); +#82140 = ORIENTED_EDGE('',*,*,#82141,.T.); +#82141 = EDGE_CURVE('',#82142,#82144,#82146,.T.); +#82142 = VERTEX_POINT('',#82143); +#82143 = CARTESIAN_POINT('',(-4.44,2.6,2.25)); +#82144 = VERTEX_POINT('',#82145); +#82145 = CARTESIAN_POINT('',(-3.47,2.6,3.22)); +#82146 = CIRCLE('',#82147,0.97); +#82147 = AXIS2_PLACEMENT_3D('',#82148,#82149,#82150); +#82148 = CARTESIAN_POINT('',(-3.47,2.6,2.25)); +#82149 = DIRECTION('',(-0.,1.,0.)); +#82150 = DIRECTION('',(8.941873587509E-16,0.,-1.)); +#82151 = ORIENTED_EDGE('',*,*,#82152,.T.); +#82152 = EDGE_CURVE('',#82144,#82153,#82155,.T.); +#82153 = VERTEX_POINT('',#82154); +#82154 = CARTESIAN_POINT('',(3.47,2.6,3.22)); +#82155 = LINE('',#82156,#82157); +#82156 = CARTESIAN_POINT('',(-4.47,2.6,3.22)); +#82157 = VECTOR('',#82158,1.); +#82158 = DIRECTION('',(1.,-0.,-0.)); +#82159 = ORIENTED_EDGE('',*,*,#82160,.T.); +#82160 = EDGE_CURVE('',#82153,#82161,#82163,.T.); +#82161 = VERTEX_POINT('',#82162); +#82162 = CARTESIAN_POINT('',(4.44,2.6,2.25)); +#82163 = CIRCLE('',#82164,0.97); +#82164 = AXIS2_PLACEMENT_3D('',#82165,#82166,#82167); +#82165 = CARTESIAN_POINT('',(3.47,2.6,2.25)); +#82166 = DIRECTION('',(-0.,1.,0.)); +#82167 = DIRECTION('',(0.,0.,-1.)); +#82168 = ORIENTED_EDGE('',*,*,#82169,.T.); +#82169 = EDGE_CURVE('',#82161,#82170,#82172,.T.); +#82170 = VERTEX_POINT('',#82171); +#82171 = CARTESIAN_POINT('',(4.44,2.6,1.05)); +#82172 = LINE('',#82173,#82174); +#82173 = CARTESIAN_POINT('',(4.44,2.6,3.25)); +#82174 = VECTOR('',#82175,1.); +#82175 = DIRECTION('',(0.,0.,-1.)); +#82176 = ORIENTED_EDGE('',*,*,#82177,.T.); +#82177 = EDGE_CURVE('',#82170,#82178,#82180,.T.); +#82178 = VERTEX_POINT('',#82179); +#82179 = CARTESIAN_POINT('',(3.47,2.6,8.E-02)); +#82180 = CIRCLE('',#82181,0.97); +#82181 = AXIS2_PLACEMENT_3D('',#82182,#82183,#82184); +#82182 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#82183 = DIRECTION('',(-0.,1.,0.)); +#82184 = DIRECTION('',(2.056630925127E-14,0.,-1.)); +#82185 = ORIENTED_EDGE('',*,*,#82186,.T.); +#82186 = EDGE_CURVE('',#82178,#82187,#82189,.T.); +#82187 = VERTEX_POINT('',#82188); +#82188 = CARTESIAN_POINT('',(-3.47,2.6,8.E-02)); +#82189 = LINE('',#82190,#82191); +#82190 = CARTESIAN_POINT('',(-3.47,2.6,8.E-02)); +#82191 = VECTOR('',#82192,1.); +#82192 = DIRECTION('',(-1.,0.,0.)); +#82193 = ORIENTED_EDGE('',*,*,#82194,.T.); +#82194 = EDGE_CURVE('',#82187,#82195,#82197,.T.); +#82195 = VERTEX_POINT('',#82196); +#82196 = CARTESIAN_POINT('',(-4.44,2.6,1.05)); +#82197 = CIRCLE('',#82198,0.97); +#82198 = AXIS2_PLACEMENT_3D('',#82199,#82200,#82201); +#82199 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#82200 = DIRECTION('',(-0.,1.,0.)); +#82201 = DIRECTION('',(0.,0.,-1.)); +#82202 = ORIENTED_EDGE('',*,*,#82203,.T.); +#82203 = EDGE_CURVE('',#82195,#82142,#82204,.T.); +#82204 = LINE('',#82205,#82206); +#82205 = CARTESIAN_POINT('',(-4.44,2.6,3.25)); +#82206 = VECTOR('',#82207,1.); +#82207 = DIRECTION('',(-0.,-0.,1.)); +#82208 = FACE_BOUND('',#82209,.T.); +#82209 = EDGE_LOOP('',(#82210,#82221,#82229,#82238,#82246,#82255,#82263, + #82272)); +#82210 = ORIENTED_EDGE('',*,*,#82211,.T.); +#82211 = EDGE_CURVE('',#82212,#82214,#82216,.T.); +#82212 = VERTEX_POINT('',#82213); +#82213 = CARTESIAN_POINT('',(-3.47,2.6,2.98)); +#82214 = VERTEX_POINT('',#82215); +#82215 = CARTESIAN_POINT('',(-4.2,2.6,2.25)); +#82216 = CIRCLE('',#82217,0.73); +#82217 = AXIS2_PLACEMENT_3D('',#82218,#82219,#82220); +#82218 = CARTESIAN_POINT('',(-3.47,2.6,2.25)); +#82219 = DIRECTION('',(0.,-1.,0.)); +#82220 = DIRECTION('',(0.,0.,-1.)); +#82221 = ORIENTED_EDGE('',*,*,#82222,.T.); +#82222 = EDGE_CURVE('',#82214,#82223,#82225,.T.); +#82223 = VERTEX_POINT('',#82224); +#82224 = CARTESIAN_POINT('',(-4.2,2.6,1.05)); +#82225 = LINE('',#82226,#82227); +#82226 = CARTESIAN_POINT('',(-4.2,2.6,3.25)); +#82227 = VECTOR('',#82228,1.); +#82228 = DIRECTION('',(0.,0.,-1.)); +#82229 = ORIENTED_EDGE('',*,*,#82230,.T.); +#82230 = EDGE_CURVE('',#82223,#82231,#82233,.T.); +#82231 = VERTEX_POINT('',#82232); +#82232 = CARTESIAN_POINT('',(-3.47,2.6,0.32)); +#82233 = CIRCLE('',#82234,0.73); +#82234 = AXIS2_PLACEMENT_3D('',#82235,#82236,#82237); +#82235 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#82236 = DIRECTION('',(0.,-1.,0.)); +#82237 = DIRECTION('',(0.,0.,-1.)); +#82238 = ORIENTED_EDGE('',*,*,#82239,.T.); +#82239 = EDGE_CURVE('',#82231,#82240,#82242,.T.); +#82240 = VERTEX_POINT('',#82241); +#82241 = CARTESIAN_POINT('',(3.47,2.6,0.32)); +#82242 = LINE('',#82243,#82244); +#82243 = CARTESIAN_POINT('',(-4.47,2.6,0.32)); +#82244 = VECTOR('',#82245,1.); +#82245 = DIRECTION('',(1.,0.,0.)); +#82246 = ORIENTED_EDGE('',*,*,#82247,.T.); +#82247 = EDGE_CURVE('',#82240,#82248,#82250,.T.); +#82248 = VERTEX_POINT('',#82249); +#82249 = CARTESIAN_POINT('',(4.2,2.6,1.05)); +#82250 = CIRCLE('',#82251,0.73); +#82251 = AXIS2_PLACEMENT_3D('',#82252,#82253,#82254); +#82252 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#82253 = DIRECTION('',(0.,-1.,0.)); +#82254 = DIRECTION('',(0.,0.,-1.)); +#82255 = ORIENTED_EDGE('',*,*,#82256,.T.); +#82256 = EDGE_CURVE('',#82248,#82257,#82259,.T.); +#82257 = VERTEX_POINT('',#82258); +#82258 = CARTESIAN_POINT('',(4.2,2.6,2.25)); +#82259 = LINE('',#82260,#82261); +#82260 = CARTESIAN_POINT('',(4.2,2.6,3.25)); +#82261 = VECTOR('',#82262,1.); +#82262 = DIRECTION('',(-0.,0.,1.)); +#82263 = ORIENTED_EDGE('',*,*,#82264,.T.); +#82264 = EDGE_CURVE('',#82257,#82265,#82267,.T.); +#82265 = VERTEX_POINT('',#82266); +#82266 = CARTESIAN_POINT('',(3.47,2.6,2.98)); +#82267 = CIRCLE('',#82268,0.73); +#82268 = AXIS2_PLACEMENT_3D('',#82269,#82270,#82271); +#82269 = CARTESIAN_POINT('',(3.47,2.6,2.25)); +#82270 = DIRECTION('',(0.,-1.,0.)); +#82271 = DIRECTION('',(0.,0.,-1.)); +#82272 = ORIENTED_EDGE('',*,*,#82273,.T.); +#82273 = EDGE_CURVE('',#82265,#82212,#82274,.T.); +#82274 = LINE('',#82275,#82276); +#82275 = CARTESIAN_POINT('',(-4.47,2.6,2.98)); +#82276 = VECTOR('',#82277,1.); +#82277 = DIRECTION('',(-1.,0.,0.)); +#82278 = PLANE('',#82279); +#82279 = AXIS2_PLACEMENT_3D('',#82280,#82281,#82282); +#82280 = CARTESIAN_POINT('',(-4.47,2.6,3.25)); +#82281 = DIRECTION('',(0.,-1.,0.)); +#82282 = DIRECTION('',(0.,-0.,-1.)); +#82283 = ADVANCED_FACE('',(#82284),#82454,.F.); +#82284 = FACE_BOUND('',#82285,.T.); +#82285 = EDGE_LOOP('',(#82286,#82297,#82305,#82313,#82321,#82329,#82337, + #82346,#82354,#82363,#82371,#82380,#82389,#82397,#82405,#82413, + #82422,#82431,#82439,#82448)); +#82286 = ORIENTED_EDGE('',*,*,#82287,.T.); +#82287 = EDGE_CURVE('',#82288,#82290,#82292,.T.); +#82288 = VERTEX_POINT('',#82289); +#82289 = CARTESIAN_POINT('',(3.13,-4.55,3.25)); +#82290 = VERTEX_POINT('',#82291); +#82291 = CARTESIAN_POINT('',(3.25,-4.67,3.25)); +#82292 = CIRCLE('',#82293,0.12); +#82293 = AXIS2_PLACEMENT_3D('',#82294,#82295,#82296); +#82294 = CARTESIAN_POINT('',(3.25,-4.55,3.25)); +#82295 = DIRECTION('',(0.,-0.,1.)); +#82296 = DIRECTION('',(-1.,0.,0.)); +#82297 = ORIENTED_EDGE('',*,*,#82298,.T.); +#82298 = EDGE_CURVE('',#82290,#82299,#82301,.T.); +#82299 = VERTEX_POINT('',#82300); +#82300 = CARTESIAN_POINT('',(3.47,-4.67,3.25)); +#82301 = LINE('',#82302,#82303); +#82302 = CARTESIAN_POINT('',(0.,-4.67,3.25)); +#82303 = VECTOR('',#82304,1.); +#82304 = DIRECTION('',(1.,-0.,0.)); +#82305 = ORIENTED_EDGE('',*,*,#82306,.F.); +#82306 = EDGE_CURVE('',#82307,#82299,#82309,.T.); +#82307 = VERTEX_POINT('',#82308); +#82308 = CARTESIAN_POINT('',(3.47,2.57,3.25)); +#82309 = LINE('',#82310,#82311); +#82310 = CARTESIAN_POINT('',(3.47,2.6,3.25)); +#82311 = VECTOR('',#82312,1.); +#82312 = DIRECTION('',(-0.,-1.,-0.)); +#82313 = ORIENTED_EDGE('',*,*,#82314,.T.); +#82314 = EDGE_CURVE('',#82307,#82315,#82317,.T.); +#82315 = VERTEX_POINT('',#82316); +#82316 = CARTESIAN_POINT('',(-3.47,2.57,3.25)); +#82317 = LINE('',#82318,#82319); +#82318 = CARTESIAN_POINT('',(0.,2.57,3.25)); +#82319 = VECTOR('',#82320,1.); +#82320 = DIRECTION('',(-1.,0.,0.)); +#82321 = ORIENTED_EDGE('',*,*,#82322,.T.); +#82322 = EDGE_CURVE('',#82315,#82323,#82325,.T.); +#82323 = VERTEX_POINT('',#82324); +#82324 = CARTESIAN_POINT('',(-3.47,-4.67,3.25)); +#82325 = LINE('',#82326,#82327); +#82326 = CARTESIAN_POINT('',(-3.47,2.6,3.25)); +#82327 = VECTOR('',#82328,1.); +#82328 = DIRECTION('',(-0.,-1.,-0.)); +#82329 = ORIENTED_EDGE('',*,*,#82330,.T.); +#82330 = EDGE_CURVE('',#82323,#82331,#82333,.T.); +#82331 = VERTEX_POINT('',#82332); +#82332 = CARTESIAN_POINT('',(-3.25,-4.67,3.25)); +#82333 = LINE('',#82334,#82335); +#82334 = CARTESIAN_POINT('',(0.,-4.67,3.25)); +#82335 = VECTOR('',#82336,1.); +#82336 = DIRECTION('',(1.,-0.,0.)); +#82337 = ORIENTED_EDGE('',*,*,#82338,.T.); +#82338 = EDGE_CURVE('',#82331,#82339,#82341,.T.); +#82339 = VERTEX_POINT('',#82340); +#82340 = CARTESIAN_POINT('',(-3.13,-4.55,3.25)); +#82341 = CIRCLE('',#82342,0.12); +#82342 = AXIS2_PLACEMENT_3D('',#82343,#82344,#82345); +#82343 = CARTESIAN_POINT('',(-3.25,-4.55,3.25)); +#82344 = DIRECTION('',(0.,-0.,1.)); +#82345 = DIRECTION('',(-1.,0.,0.)); +#82346 = ORIENTED_EDGE('',*,*,#82347,.T.); +#82347 = EDGE_CURVE('',#82339,#82348,#82350,.T.); +#82348 = VERTEX_POINT('',#82349); +#82349 = CARTESIAN_POINT('',(-3.13,-3.75,3.25)); +#82350 = LINE('',#82351,#82352); +#82351 = CARTESIAN_POINT('',(-3.13,0.,3.25)); +#82352 = VECTOR('',#82353,1.); +#82353 = DIRECTION('',(-0.,1.,-0.)); +#82354 = ORIENTED_EDGE('',*,*,#82355,.T.); +#82355 = EDGE_CURVE('',#82348,#82356,#82358,.T.); +#82356 = VERTEX_POINT('',#82357); +#82357 = CARTESIAN_POINT('',(-2.95,-3.57,3.25)); +#82358 = CIRCLE('',#82359,0.18); +#82359 = AXIS2_PLACEMENT_3D('',#82360,#82361,#82362); +#82360 = CARTESIAN_POINT('',(-2.95,-3.75,3.25)); +#82361 = DIRECTION('',(0.,0.,-1.)); +#82362 = DIRECTION('',(-1.,0.,0.)); +#82363 = ORIENTED_EDGE('',*,*,#82364,.T.); +#82364 = EDGE_CURVE('',#82356,#82365,#82367,.T.); +#82365 = VERTEX_POINT('',#82366); +#82366 = CARTESIAN_POINT('',(-1.25,-3.57,3.25)); +#82367 = LINE('',#82368,#82369); +#82368 = CARTESIAN_POINT('',(0.,-3.57,3.25)); +#82369 = VECTOR('',#82370,1.); +#82370 = DIRECTION('',(1.,-0.,-0.)); +#82371 = ORIENTED_EDGE('',*,*,#82372,.T.); +#82372 = EDGE_CURVE('',#82365,#82373,#82375,.T.); +#82373 = VERTEX_POINT('',#82374); +#82374 = CARTESIAN_POINT('',(-1.07,-3.75,3.25)); +#82375 = CIRCLE('',#82376,0.18); +#82376 = AXIS2_PLACEMENT_3D('',#82377,#82378,#82379); +#82377 = CARTESIAN_POINT('',(-1.25,-3.75,3.25)); +#82378 = DIRECTION('',(0.,0.,-1.)); +#82379 = DIRECTION('',(-1.,0.,0.)); +#82380 = ORIENTED_EDGE('',*,*,#82381,.T.); +#82381 = EDGE_CURVE('',#82373,#82382,#82384,.T.); +#82382 = VERTEX_POINT('',#82383); +#82383 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,3.25)); +#82384 = CIRCLE('',#82385,0.18); +#82385 = AXIS2_PLACEMENT_3D('',#82386,#82387,#82388); +#82386 = CARTESIAN_POINT('',(-1.25,-3.75,3.25)); +#82387 = DIRECTION('',(0.,0.,-1.)); +#82388 = DIRECTION('',(-1.,0.,0.)); +#82389 = ORIENTED_EDGE('',*,*,#82390,.T.); +#82390 = EDGE_CURVE('',#82382,#82391,#82393,.T.); +#82391 = VERTEX_POINT('',#82392); +#82392 = CARTESIAN_POINT('',(-1.235016269382,-4.67,3.25)); +#82393 = LINE('',#82394,#82395); +#82394 = CARTESIAN_POINT('',(-1.235016269382,-4.7,3.25)); +#82395 = VECTOR('',#82396,1.); +#82396 = DIRECTION('',(-0.,-1.,-0.)); +#82397 = ORIENTED_EDGE('',*,*,#82398,.T.); +#82398 = EDGE_CURVE('',#82391,#82399,#82401,.T.); +#82399 = VERTEX_POINT('',#82400); +#82400 = CARTESIAN_POINT('',(1.235016269382,-4.67,3.25)); +#82401 = LINE('',#82402,#82403); +#82402 = CARTESIAN_POINT('',(0.,-4.67,3.25)); +#82403 = VECTOR('',#82404,1.); +#82404 = DIRECTION('',(1.,-0.,0.)); +#82405 = ORIENTED_EDGE('',*,*,#82406,.F.); +#82406 = EDGE_CURVE('',#82407,#82399,#82409,.T.); +#82407 = VERTEX_POINT('',#82408); +#82408 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,3.25)); +#82409 = LINE('',#82410,#82411); +#82410 = CARTESIAN_POINT('',(1.235016269382,-4.7,3.25)); +#82411 = VECTOR('',#82412,1.); +#82412 = DIRECTION('',(0.,-1.,-0.)); +#82413 = ORIENTED_EDGE('',*,*,#82414,.T.); +#82414 = EDGE_CURVE('',#82407,#82415,#82417,.T.); +#82415 = VERTEX_POINT('',#82416); +#82416 = CARTESIAN_POINT('',(1.07,-3.75,3.25)); +#82417 = CIRCLE('',#82418,0.18); +#82418 = AXIS2_PLACEMENT_3D('',#82419,#82420,#82421); +#82419 = CARTESIAN_POINT('',(1.25,-3.75,3.25)); +#82420 = DIRECTION('',(0.,0.,-1.)); +#82421 = DIRECTION('',(-1.,0.,0.)); +#82422 = ORIENTED_EDGE('',*,*,#82423,.T.); +#82423 = EDGE_CURVE('',#82415,#82424,#82426,.T.); +#82424 = VERTEX_POINT('',#82425); +#82425 = CARTESIAN_POINT('',(1.25,-3.57,3.25)); +#82426 = CIRCLE('',#82427,0.18); +#82427 = AXIS2_PLACEMENT_3D('',#82428,#82429,#82430); +#82428 = CARTESIAN_POINT('',(1.25,-3.75,3.25)); +#82429 = DIRECTION('',(0.,0.,-1.)); +#82430 = DIRECTION('',(-1.,0.,0.)); +#82431 = ORIENTED_EDGE('',*,*,#82432,.T.); +#82432 = EDGE_CURVE('',#82424,#82433,#82435,.T.); +#82433 = VERTEX_POINT('',#82434); +#82434 = CARTESIAN_POINT('',(2.95,-3.57,3.25)); +#82435 = LINE('',#82436,#82437); +#82436 = CARTESIAN_POINT('',(-3.096481404619E-15,-3.57,3.25)); +#82437 = VECTOR('',#82438,1.); +#82438 = DIRECTION('',(1.,-8.673617379884E-16,-0.)); +#82439 = ORIENTED_EDGE('',*,*,#82440,.T.); +#82440 = EDGE_CURVE('',#82433,#82441,#82443,.T.); +#82441 = VERTEX_POINT('',#82442); +#82442 = CARTESIAN_POINT('',(3.13,-3.75,3.25)); +#82443 = CIRCLE('',#82444,0.18); +#82444 = AXIS2_PLACEMENT_3D('',#82445,#82446,#82447); +#82445 = CARTESIAN_POINT('',(2.95,-3.75,3.25)); +#82446 = DIRECTION('',(0.,0.,-1.)); +#82447 = DIRECTION('',(-1.,0.,0.)); +#82448 = ORIENTED_EDGE('',*,*,#82449,.T.); +#82449 = EDGE_CURVE('',#82441,#82288,#82450,.T.); +#82450 = LINE('',#82451,#82452); +#82451 = CARTESIAN_POINT('',(3.13,-2.468038399912E-15,3.25)); +#82452 = VECTOR('',#82453,1.); +#82453 = DIRECTION('',(-7.885106708985E-16,-1.,-0.)); +#82454 = PLANE('',#82455); +#82455 = AXIS2_PLACEMENT_3D('',#82456,#82457,#82458); +#82456 = CARTESIAN_POINT('',(0.,0.,3.25)); +#82457 = DIRECTION('',(0.,0.,-1.)); +#82458 = DIRECTION('',(-1.,0.,-0.)); +#82459 = ADVANCED_FACE('',(#82460),#82681,.F.); +#82460 = FACE_BOUND('',#82461,.T.); +#82461 = EDGE_LOOP('',(#82462,#82473,#82481,#82489,#82497,#82506,#82515, + #82523,#82532,#82540,#82549,#82557,#82566,#82575,#82583,#82592, + #82601,#82607,#82608,#82616,#82624,#82632,#82641,#82649,#82658, + #82666,#82675)); +#82462 = ORIENTED_EDGE('',*,*,#82463,.T.); +#82463 = EDGE_CURVE('',#82464,#82466,#82468,.T.); +#82464 = VERTEX_POINT('',#82465); +#82465 = CARTESIAN_POINT('',(4.47,-3.4,1.48)); +#82466 = VERTEX_POINT('',#82467); +#82467 = CARTESIAN_POINT('',(4.47,-3.17,1.25)); +#82468 = CIRCLE('',#82469,0.23); +#82469 = AXIS2_PLACEMENT_3D('',#82470,#82471,#82472); +#82470 = CARTESIAN_POINT('',(4.47,-3.4,1.25)); +#82471 = DIRECTION('',(-1.,0.,0.)); +#82472 = DIRECTION('',(0.,0.,1.)); +#82473 = ORIENTED_EDGE('',*,*,#82474,.T.); +#82474 = EDGE_CURVE('',#82466,#82475,#82477,.T.); +#82475 = VERTEX_POINT('',#82476); +#82476 = CARTESIAN_POINT('',(4.47,-3.17,1.05)); +#82477 = LINE('',#82478,#82479); +#82478 = CARTESIAN_POINT('',(4.47,-3.17,3.25)); +#82479 = VECTOR('',#82480,1.); +#82480 = DIRECTION('',(0.,0.,-1.)); +#82481 = ORIENTED_EDGE('',*,*,#82482,.F.); +#82482 = EDGE_CURVE('',#82483,#82475,#82485,.T.); +#82483 = VERTEX_POINT('',#82484); +#82484 = CARTESIAN_POINT('',(4.47,-1.43,1.05)); +#82485 = LINE('',#82486,#82487); +#82486 = CARTESIAN_POINT('',(4.47,2.6,1.05)); +#82487 = VECTOR('',#82488,1.); +#82488 = DIRECTION('',(-0.,-1.,-0.)); +#82489 = ORIENTED_EDGE('',*,*,#82490,.T.); +#82490 = EDGE_CURVE('',#82483,#82491,#82493,.T.); +#82491 = VERTEX_POINT('',#82492); +#82492 = CARTESIAN_POINT('',(4.47,-1.43,1.25)); +#82493 = LINE('',#82494,#82495); +#82494 = CARTESIAN_POINT('',(4.47,-1.43,3.25)); +#82495 = VECTOR('',#82496,1.); +#82496 = DIRECTION('',(0.,0.,1.)); +#82497 = ORIENTED_EDGE('',*,*,#82498,.T.); +#82498 = EDGE_CURVE('',#82491,#82499,#82501,.T.); +#82499 = VERTEX_POINT('',#82500); +#82500 = CARTESIAN_POINT('',(4.47,-1.2,1.48)); +#82501 = CIRCLE('',#82502,0.23); +#82502 = AXIS2_PLACEMENT_3D('',#82503,#82504,#82505); +#82503 = CARTESIAN_POINT('',(4.47,-1.2,1.25)); +#82504 = DIRECTION('',(-1.,0.,0.)); +#82505 = DIRECTION('',(0.,0.,1.)); +#82506 = ORIENTED_EDGE('',*,*,#82507,.T.); +#82507 = EDGE_CURVE('',#82499,#82508,#82510,.T.); +#82508 = VERTEX_POINT('',#82509); +#82509 = CARTESIAN_POINT('',(4.47,-0.97,1.25)); +#82510 = CIRCLE('',#82511,0.23); +#82511 = AXIS2_PLACEMENT_3D('',#82512,#82513,#82514); +#82512 = CARTESIAN_POINT('',(4.47,-1.2,1.25)); +#82513 = DIRECTION('',(-1.,0.,0.)); +#82514 = DIRECTION('',(0.,0.,1.)); +#82515 = ORIENTED_EDGE('',*,*,#82516,.T.); +#82516 = EDGE_CURVE('',#82508,#82517,#82519,.T.); +#82517 = VERTEX_POINT('',#82518); +#82518 = CARTESIAN_POINT('',(4.47,-0.97,0.338402894381)); +#82519 = LINE('',#82520,#82521); +#82520 = CARTESIAN_POINT('',(4.47,-0.97,3.25)); +#82521 = VECTOR('',#82522,1.); +#82522 = DIRECTION('',(-0.,-0.,-1.)); +#82523 = ORIENTED_EDGE('',*,*,#82524,.T.); +#82524 = EDGE_CURVE('',#82517,#82525,#82527,.T.); +#82525 = VERTEX_POINT('',#82526); +#82526 = CARTESIAN_POINT('',(4.47,-0.923941410033,0.272624410926)); +#82527 = CIRCLE('',#82528,7.E-02); +#82528 = AXIS2_PLACEMENT_3D('',#82529,#82530,#82531); +#82529 = CARTESIAN_POINT('',(4.47,-0.9,0.338402894381)); +#82530 = DIRECTION('',(1.,0.,-0.)); +#82531 = DIRECTION('',(0.,-1.548860246408E-15,1.)); +#82532 = ORIENTED_EDGE('',*,*,#82533,.T.); +#82533 = EDGE_CURVE('',#82525,#82534,#82536,.T.); +#82534 = VERTEX_POINT('',#82535); +#82535 = CARTESIAN_POINT('',(4.47,-0.455537381368,0.102139286881)); +#82536 = LINE('',#82537,#82538); +#82537 = CARTESIAN_POINT('',(4.47,-0.455537381368,0.102139286881)); +#82538 = VECTOR('',#82539,1.); +#82539 = DIRECTION('',(-0.,0.939692620786,-0.342020143326)); +#82540 = ORIENTED_EDGE('',*,*,#82541,.T.); +#82541 = EDGE_CURVE('',#82534,#82542,#82544,.T.); +#82542 = VERTEX_POINT('',#82543); +#82543 = CARTESIAN_POINT('',(4.47,-0.37,-2.002075382097E-02)); +#82544 = CIRCLE('',#82545,0.13); +#82545 = AXIS2_PLACEMENT_3D('',#82546,#82547,#82548); +#82546 = CARTESIAN_POINT('',(4.47,-0.5,-2.002075382097E-02)); +#82547 = DIRECTION('',(-1.,0.,0.)); +#82548 = DIRECTION('',(0.,0.,1.)); +#82549 = ORIENTED_EDGE('',*,*,#82550,.T.); +#82550 = EDGE_CURVE('',#82542,#82551,#82553,.T.); +#82551 = VERTEX_POINT('',#82552); +#82552 = CARTESIAN_POINT('',(4.47,-0.37,-0.45)); +#82553 = LINE('',#82554,#82555); +#82554 = CARTESIAN_POINT('',(4.47,-0.37,3.25)); +#82555 = VECTOR('',#82556,1.); +#82556 = DIRECTION('',(-0.,1.807003620809E-16,-1.)); +#82557 = ORIENTED_EDGE('',*,*,#82558,.T.); +#82558 = EDGE_CURVE('',#82551,#82559,#82561,.T.); +#82559 = VERTEX_POINT('',#82560); +#82560 = CARTESIAN_POINT('',(4.47,-1.355252715607E-18,-0.82)); +#82561 = CIRCLE('',#82562,0.37); +#82562 = AXIS2_PLACEMENT_3D('',#82563,#82564,#82565); +#82563 = CARTESIAN_POINT('',(4.47,-1.807003620809E-17,-0.45)); +#82564 = DIRECTION('',(1.,0.,-0.)); +#82565 = DIRECTION('',(0.,0.,1.)); +#82566 = ORIENTED_EDGE('',*,*,#82567,.T.); +#82567 = EDGE_CURVE('',#82559,#82568,#82570,.T.); +#82568 = VERTEX_POINT('',#82569); +#82569 = CARTESIAN_POINT('',(4.47,0.37,-0.45)); +#82570 = CIRCLE('',#82571,0.37); +#82571 = AXIS2_PLACEMENT_3D('',#82572,#82573,#82574); +#82572 = CARTESIAN_POINT('',(4.47,0.,-0.45)); +#82573 = DIRECTION('',(1.,0.,-0.)); +#82574 = DIRECTION('',(0.,0.,1.)); +#82575 = ORIENTED_EDGE('',*,*,#82576,.T.); +#82576 = EDGE_CURVE('',#82568,#82577,#82579,.T.); +#82577 = VERTEX_POINT('',#82578); +#82578 = CARTESIAN_POINT('',(4.47,0.37,1.25)); +#82579 = LINE('',#82580,#82581); +#82580 = CARTESIAN_POINT('',(4.47,0.37,3.25)); +#82581 = VECTOR('',#82582,1.); +#82582 = DIRECTION('',(0.,0.,1.)); +#82583 = ORIENTED_EDGE('',*,*,#82584,.T.); +#82584 = EDGE_CURVE('',#82577,#82585,#82587,.T.); +#82585 = VERTEX_POINT('',#82586); +#82586 = CARTESIAN_POINT('',(4.47,0.6,1.48)); +#82587 = CIRCLE('',#82588,0.23); +#82588 = AXIS2_PLACEMENT_3D('',#82589,#82590,#82591); +#82589 = CARTESIAN_POINT('',(4.47,0.6,1.25)); +#82590 = DIRECTION('',(-1.,0.,0.)); +#82591 = DIRECTION('',(0.,0.,1.)); +#82592 = ORIENTED_EDGE('',*,*,#82593,.T.); +#82593 = EDGE_CURVE('',#82585,#82594,#82596,.T.); +#82594 = VERTEX_POINT('',#82595); +#82595 = CARTESIAN_POINT('',(4.47,0.83,1.25)); +#82596 = CIRCLE('',#82597,0.23); +#82597 = AXIS2_PLACEMENT_3D('',#82598,#82599,#82600); +#82598 = CARTESIAN_POINT('',(4.47,0.6,1.25)); +#82599 = DIRECTION('',(-1.,0.,0.)); +#82600 = DIRECTION('',(0.,0.,1.)); +#82601 = ORIENTED_EDGE('',*,*,#82602,.T.); +#82602 = EDGE_CURVE('',#82594,#82111,#82603,.T.); +#82603 = LINE('',#82604,#82605); +#82604 = CARTESIAN_POINT('',(4.47,0.83,3.25)); +#82605 = VECTOR('',#82606,1.); +#82606 = DIRECTION('',(0.,0.,-1.)); +#82607 = ORIENTED_EDGE('',*,*,#82108,.F.); +#82608 = ORIENTED_EDGE('',*,*,#82609,.T.); +#82609 = EDGE_CURVE('',#82109,#82610,#82612,.T.); +#82610 = VERTEX_POINT('',#82611); +#82611 = CARTESIAN_POINT('',(4.47,2.57,2.25)); +#82612 = LINE('',#82613,#82614); +#82613 = CARTESIAN_POINT('',(4.47,2.57,3.25)); +#82614 = VECTOR('',#82615,1.); +#82615 = DIRECTION('',(-0.,-0.,1.)); +#82616 = ORIENTED_EDGE('',*,*,#82617,.T.); +#82617 = EDGE_CURVE('',#82610,#82618,#82620,.T.); +#82618 = VERTEX_POINT('',#82619); +#82619 = CARTESIAN_POINT('',(4.47,-4.67,2.25)); +#82620 = LINE('',#82621,#82622); +#82621 = CARTESIAN_POINT('',(4.47,2.6,2.25)); +#82622 = VECTOR('',#82623,1.); +#82623 = DIRECTION('',(-0.,-1.,-0.)); +#82624 = ORIENTED_EDGE('',*,*,#82625,.T.); +#82625 = EDGE_CURVE('',#82618,#82626,#82628,.T.); +#82626 = VERTEX_POINT('',#82627); +#82627 = CARTESIAN_POINT('',(4.47,-4.67,-0.45)); +#82628 = LINE('',#82629,#82630); +#82629 = CARTESIAN_POINT('',(4.47,-4.67,3.25)); +#82630 = VECTOR('',#82631,1.); +#82631 = DIRECTION('',(0.,0.,-1.)); +#82632 = ORIENTED_EDGE('',*,*,#82633,.T.); +#82633 = EDGE_CURVE('',#82626,#82634,#82636,.T.); +#82634 = VERTEX_POINT('',#82635); +#82635 = CARTESIAN_POINT('',(4.47,-4.3,-0.82)); +#82636 = CIRCLE('',#82637,0.37); +#82637 = AXIS2_PLACEMENT_3D('',#82638,#82639,#82640); +#82638 = CARTESIAN_POINT('',(4.47,-4.3,-0.45)); +#82639 = DIRECTION('',(1.,0.,-0.)); +#82640 = DIRECTION('',(0.,0.,1.)); +#82641 = ORIENTED_EDGE('',*,*,#82642,.T.); +#82642 = EDGE_CURVE('',#82634,#82643,#82645,.T.); +#82643 = VERTEX_POINT('',#82644); +#82644 = CARTESIAN_POINT('',(4.47,-4.05,-0.82)); +#82645 = LINE('',#82646,#82647); +#82646 = CARTESIAN_POINT('',(4.47,-4.7,-0.82)); +#82647 = VECTOR('',#82648,1.); +#82648 = DIRECTION('',(-0.,1.,-0.)); +#82649 = ORIENTED_EDGE('',*,*,#82650,.T.); +#82650 = EDGE_CURVE('',#82643,#82651,#82653,.T.); +#82651 = VERTEX_POINT('',#82652); +#82652 = CARTESIAN_POINT('',(4.47,-3.68,-0.45)); +#82653 = CIRCLE('',#82654,0.37); +#82654 = AXIS2_PLACEMENT_3D('',#82655,#82656,#82657); +#82655 = CARTESIAN_POINT('',(4.47,-4.05,-0.45)); +#82656 = DIRECTION('',(1.,0.,-0.)); +#82657 = DIRECTION('',(0.,0.,1.)); +#82658 = ORIENTED_EDGE('',*,*,#82659,.T.); +#82659 = EDGE_CURVE('',#82651,#82660,#82662,.T.); +#82660 = VERTEX_POINT('',#82661); +#82661 = CARTESIAN_POINT('',(4.47,-3.68,1.25)); +#82662 = LINE('',#82663,#82664); +#82663 = CARTESIAN_POINT('',(4.47,-3.68,3.25)); +#82664 = VECTOR('',#82665,1.); +#82665 = DIRECTION('',(0.,0.,1.)); +#82666 = ORIENTED_EDGE('',*,*,#82667,.T.); +#82667 = EDGE_CURVE('',#82660,#82668,#82670,.T.); +#82668 = VERTEX_POINT('',#82669); +#82669 = CARTESIAN_POINT('',(4.47,-3.45,1.48)); +#82670 = CIRCLE('',#82671,0.23); +#82671 = AXIS2_PLACEMENT_3D('',#82672,#82673,#82674); +#82672 = CARTESIAN_POINT('',(4.47,-3.45,1.25)); +#82673 = DIRECTION('',(-1.,0.,0.)); +#82674 = DIRECTION('',(0.,0.,1.)); +#82675 = ORIENTED_EDGE('',*,*,#82676,.T.); +#82676 = EDGE_CURVE('',#82668,#82464,#82677,.T.); +#82677 = LINE('',#82678,#82679); +#82678 = CARTESIAN_POINT('',(4.47,-3.4,1.48)); +#82679 = VECTOR('',#82680,1.); +#82680 = DIRECTION('',(0.,1.,0.)); +#82681 = PLANE('',#82682); +#82682 = AXIS2_PLACEMENT_3D('',#82683,#82684,#82685); +#82683 = CARTESIAN_POINT('',(4.47,-4.7,3.25)); +#82684 = DIRECTION('',(-1.,0.,0.)); +#82685 = DIRECTION('',(0.,0.,1.)); +#82686 = ADVANCED_FACE('',(#82687),#82908,.F.); +#82687 = FACE_BOUND('',#82688,.T.); +#82688 = EDGE_LOOP('',(#82689,#82700,#82706,#82707,#82715,#82724,#82732, + #82741,#82749,#82758,#82766,#82775,#82783,#82791,#82799,#82807, + #82815,#82824,#82833,#82841,#82850,#82859,#82867,#82876,#82884, + #82893,#82901)); +#82689 = ORIENTED_EDGE('',*,*,#82690,.T.); +#82690 = EDGE_CURVE('',#82691,#82693,#82695,.T.); +#82691 = VERTEX_POINT('',#82692); +#82692 = CARTESIAN_POINT('',(-4.47,-1.2,1.48)); +#82693 = VERTEX_POINT('',#82694); +#82694 = CARTESIAN_POINT('',(-4.47,-1.43,1.25)); +#82695 = CIRCLE('',#82696,0.23); +#82696 = AXIS2_PLACEMENT_3D('',#82697,#82698,#82699); +#82697 = CARTESIAN_POINT('',(-4.47,-1.2,1.25)); +#82698 = DIRECTION('',(1.,0.,0.)); +#82699 = DIRECTION('',(0.,0.,-1.)); +#82700 = ORIENTED_EDGE('',*,*,#82701,.T.); +#82701 = EDGE_CURVE('',#82693,#81954,#82702,.T.); +#82702 = LINE('',#82703,#82704); +#82703 = CARTESIAN_POINT('',(-4.47,-1.43,3.25)); +#82704 = VECTOR('',#82705,1.); +#82705 = DIRECTION('',(0.,0.,-1.)); +#82706 = ORIENTED_EDGE('',*,*,#81953,.T.); +#82707 = ORIENTED_EDGE('',*,*,#82708,.T.); +#82708 = EDGE_CURVE('',#81956,#82709,#82711,.T.); +#82709 = VERTEX_POINT('',#82710); +#82710 = CARTESIAN_POINT('',(-4.47,-3.17,1.25)); +#82711 = LINE('',#82712,#82713); +#82712 = CARTESIAN_POINT('',(-4.47,-3.17,3.25)); +#82713 = VECTOR('',#82714,1.); +#82714 = DIRECTION('',(-0.,-0.,1.)); +#82715 = ORIENTED_EDGE('',*,*,#82716,.T.); +#82716 = EDGE_CURVE('',#82709,#82717,#82719,.T.); +#82717 = VERTEX_POINT('',#82718); +#82718 = CARTESIAN_POINT('',(-4.47,-3.4,1.48)); +#82719 = CIRCLE('',#82720,0.23); +#82720 = AXIS2_PLACEMENT_3D('',#82721,#82722,#82723); +#82721 = CARTESIAN_POINT('',(-4.47,-3.4,1.25)); +#82722 = DIRECTION('',(1.,0.,0.)); +#82723 = DIRECTION('',(0.,0.,-1.)); +#82724 = ORIENTED_EDGE('',*,*,#82725,.T.); +#82725 = EDGE_CURVE('',#82717,#82726,#82728,.T.); +#82726 = VERTEX_POINT('',#82727); +#82727 = CARTESIAN_POINT('',(-4.47,-3.45,1.48)); +#82728 = LINE('',#82729,#82730); +#82729 = CARTESIAN_POINT('',(-4.47,-3.45,1.48)); +#82730 = VECTOR('',#82731,1.); +#82731 = DIRECTION('',(0.,-1.,0.)); +#82732 = ORIENTED_EDGE('',*,*,#82733,.T.); +#82733 = EDGE_CURVE('',#82726,#82734,#82736,.T.); +#82734 = VERTEX_POINT('',#82735); +#82735 = CARTESIAN_POINT('',(-4.47,-3.68,1.25)); +#82736 = CIRCLE('',#82737,0.23); +#82737 = AXIS2_PLACEMENT_3D('',#82738,#82739,#82740); +#82738 = CARTESIAN_POINT('',(-4.47,-3.45,1.25)); +#82739 = DIRECTION('',(1.,0.,0.)); +#82740 = DIRECTION('',(0.,0.,-1.)); +#82741 = ORIENTED_EDGE('',*,*,#82742,.T.); +#82742 = EDGE_CURVE('',#82734,#82743,#82745,.T.); +#82743 = VERTEX_POINT('',#82744); +#82744 = CARTESIAN_POINT('',(-4.47,-3.68,-0.45)); +#82745 = LINE('',#82746,#82747); +#82746 = CARTESIAN_POINT('',(-4.47,-3.68,3.25)); +#82747 = VECTOR('',#82748,1.); +#82748 = DIRECTION('',(-0.,-0.,-1.)); +#82749 = ORIENTED_EDGE('',*,*,#82750,.T.); +#82750 = EDGE_CURVE('',#82743,#82751,#82753,.T.); +#82751 = VERTEX_POINT('',#82752); +#82752 = CARTESIAN_POINT('',(-4.47,-4.05,-0.82)); +#82753 = CIRCLE('',#82754,0.37); +#82754 = AXIS2_PLACEMENT_3D('',#82755,#82756,#82757); +#82755 = CARTESIAN_POINT('',(-4.47,-4.05,-0.45)); +#82756 = DIRECTION('',(-1.,-0.,-0.)); +#82757 = DIRECTION('',(0.,0.,-1.)); +#82758 = ORIENTED_EDGE('',*,*,#82759,.T.); +#82759 = EDGE_CURVE('',#82751,#82760,#82762,.T.); +#82760 = VERTEX_POINT('',#82761); +#82761 = CARTESIAN_POINT('',(-4.47,-4.3,-0.82)); +#82762 = LINE('',#82763,#82764); +#82763 = CARTESIAN_POINT('',(-4.47,-4.7,-0.82)); +#82764 = VECTOR('',#82765,1.); +#82765 = DIRECTION('',(0.,-1.,-0.)); +#82766 = ORIENTED_EDGE('',*,*,#82767,.T.); +#82767 = EDGE_CURVE('',#82760,#82768,#82770,.T.); +#82768 = VERTEX_POINT('',#82769); +#82769 = CARTESIAN_POINT('',(-4.47,-4.67,-0.45)); +#82770 = CIRCLE('',#82771,0.37); +#82771 = AXIS2_PLACEMENT_3D('',#82772,#82773,#82774); +#82772 = CARTESIAN_POINT('',(-4.47,-4.3,-0.45)); +#82773 = DIRECTION('',(-1.,-0.,-0.)); +#82774 = DIRECTION('',(0.,0.,-1.)); +#82775 = ORIENTED_EDGE('',*,*,#82776,.T.); +#82776 = EDGE_CURVE('',#82768,#82777,#82779,.T.); +#82777 = VERTEX_POINT('',#82778); +#82778 = CARTESIAN_POINT('',(-4.47,-4.67,2.25)); +#82779 = LINE('',#82780,#82781); +#82780 = CARTESIAN_POINT('',(-4.47,-4.67,3.25)); +#82781 = VECTOR('',#82782,1.); +#82782 = DIRECTION('',(-0.,-0.,1.)); +#82783 = ORIENTED_EDGE('',*,*,#82784,.F.); +#82784 = EDGE_CURVE('',#82785,#82777,#82787,.T.); +#82785 = VERTEX_POINT('',#82786); +#82786 = CARTESIAN_POINT('',(-4.47,2.57,2.25)); +#82787 = LINE('',#82788,#82789); +#82788 = CARTESIAN_POINT('',(-4.47,2.6,2.25)); +#82789 = VECTOR('',#82790,1.); +#82790 = DIRECTION('',(-0.,-1.,-0.)); +#82791 = ORIENTED_EDGE('',*,*,#82792,.T.); +#82792 = EDGE_CURVE('',#82785,#82793,#82795,.T.); +#82793 = VERTEX_POINT('',#82794); +#82794 = CARTESIAN_POINT('',(-4.47,2.57,1.05)); +#82795 = LINE('',#82796,#82797); +#82796 = CARTESIAN_POINT('',(-4.47,2.57,3.25)); +#82797 = VECTOR('',#82798,1.); +#82798 = DIRECTION('',(0.,0.,-1.)); +#82799 = ORIENTED_EDGE('',*,*,#82800,.T.); +#82800 = EDGE_CURVE('',#82793,#82801,#82803,.T.); +#82801 = VERTEX_POINT('',#82802); +#82802 = CARTESIAN_POINT('',(-4.47,0.83,1.05)); +#82803 = LINE('',#82804,#82805); +#82804 = CARTESIAN_POINT('',(-4.47,2.6,1.05)); +#82805 = VECTOR('',#82806,1.); +#82806 = DIRECTION('',(-0.,-1.,-0.)); +#82807 = ORIENTED_EDGE('',*,*,#82808,.T.); +#82808 = EDGE_CURVE('',#82801,#82809,#82811,.T.); +#82809 = VERTEX_POINT('',#82810); +#82810 = CARTESIAN_POINT('',(-4.47,0.83,1.25)); +#82811 = LINE('',#82812,#82813); +#82812 = CARTESIAN_POINT('',(-4.47,0.83,3.25)); +#82813 = VECTOR('',#82814,1.); +#82814 = DIRECTION('',(0.,0.,1.)); +#82815 = ORIENTED_EDGE('',*,*,#82816,.T.); +#82816 = EDGE_CURVE('',#82809,#82817,#82819,.T.); +#82817 = VERTEX_POINT('',#82818); +#82818 = CARTESIAN_POINT('',(-4.47,0.6,1.48)); +#82819 = CIRCLE('',#82820,0.23); +#82820 = AXIS2_PLACEMENT_3D('',#82821,#82822,#82823); +#82821 = CARTESIAN_POINT('',(-4.47,0.6,1.25)); +#82822 = DIRECTION('',(1.,0.,0.)); +#82823 = DIRECTION('',(0.,0.,-1.)); +#82824 = ORIENTED_EDGE('',*,*,#82825,.T.); +#82825 = EDGE_CURVE('',#82817,#82826,#82828,.T.); +#82826 = VERTEX_POINT('',#82827); +#82827 = CARTESIAN_POINT('',(-4.47,0.37,1.25)); +#82828 = CIRCLE('',#82829,0.23); +#82829 = AXIS2_PLACEMENT_3D('',#82830,#82831,#82832); +#82830 = CARTESIAN_POINT('',(-4.47,0.6,1.25)); +#82831 = DIRECTION('',(1.,0.,0.)); +#82832 = DIRECTION('',(0.,0.,-1.)); +#82833 = ORIENTED_EDGE('',*,*,#82834,.T.); +#82834 = EDGE_CURVE('',#82826,#82835,#82837,.T.); +#82835 = VERTEX_POINT('',#82836); +#82836 = CARTESIAN_POINT('',(-4.47,0.37,-0.45)); +#82837 = LINE('',#82838,#82839); +#82838 = CARTESIAN_POINT('',(-4.47,0.37,3.25)); +#82839 = VECTOR('',#82840,1.); +#82840 = DIRECTION('',(0.,-0.,-1.)); +#82841 = ORIENTED_EDGE('',*,*,#82842,.T.); +#82842 = EDGE_CURVE('',#82835,#82843,#82845,.T.); +#82843 = VERTEX_POINT('',#82844); +#82844 = CARTESIAN_POINT('',(-4.47,-1.355252715607E-18,-0.82)); +#82845 = CIRCLE('',#82846,0.37); +#82846 = AXIS2_PLACEMENT_3D('',#82847,#82848,#82849); +#82847 = CARTESIAN_POINT('',(-4.47,0.,-0.45)); +#82848 = DIRECTION('',(-1.,-0.,-0.)); +#82849 = DIRECTION('',(0.,0.,-1.)); +#82850 = ORIENTED_EDGE('',*,*,#82851,.T.); +#82851 = EDGE_CURVE('',#82843,#82852,#82854,.T.); +#82852 = VERTEX_POINT('',#82853); +#82853 = CARTESIAN_POINT('',(-4.47,-0.37,-0.45)); +#82854 = CIRCLE('',#82855,0.37); +#82855 = AXIS2_PLACEMENT_3D('',#82856,#82857,#82858); +#82856 = CARTESIAN_POINT('',(-4.47,-1.807003620809E-17,-0.45)); +#82857 = DIRECTION('',(-1.,-0.,-0.)); +#82858 = DIRECTION('',(0.,0.,-1.)); +#82859 = ORIENTED_EDGE('',*,*,#82860,.T.); +#82860 = EDGE_CURVE('',#82852,#82861,#82863,.T.); +#82861 = VERTEX_POINT('',#82862); +#82862 = CARTESIAN_POINT('',(-4.47,-0.37,-2.002075382097E-02)); +#82863 = LINE('',#82864,#82865); +#82864 = CARTESIAN_POINT('',(-4.47,-0.37,3.25)); +#82865 = VECTOR('',#82866,1.); +#82866 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#82867 = ORIENTED_EDGE('',*,*,#82868,.T.); +#82868 = EDGE_CURVE('',#82861,#82869,#82871,.T.); +#82869 = VERTEX_POINT('',#82870); +#82870 = CARTESIAN_POINT('',(-4.47,-0.455537381368,0.102139286881)); +#82871 = CIRCLE('',#82872,0.13); +#82872 = AXIS2_PLACEMENT_3D('',#82873,#82874,#82875); +#82873 = CARTESIAN_POINT('',(-4.47,-0.5,-2.002075382097E-02)); +#82874 = DIRECTION('',(1.,0.,0.)); +#82875 = DIRECTION('',(0.,0.,-1.)); +#82876 = ORIENTED_EDGE('',*,*,#82877,.T.); +#82877 = EDGE_CURVE('',#82869,#82878,#82880,.T.); +#82878 = VERTEX_POINT('',#82879); +#82879 = CARTESIAN_POINT('',(-4.47,-0.923941410033,0.272624410926)); +#82880 = LINE('',#82881,#82882); +#82881 = CARTESIAN_POINT('',(-4.47,-0.923941410033,0.272624410926)); +#82882 = VECTOR('',#82883,1.); +#82883 = DIRECTION('',(-0.,-0.939692620786,0.342020143326)); +#82884 = ORIENTED_EDGE('',*,*,#82885,.T.); +#82885 = EDGE_CURVE('',#82878,#82886,#82888,.T.); +#82886 = VERTEX_POINT('',#82887); +#82887 = CARTESIAN_POINT('',(-4.47,-0.97,0.338402894381)); +#82888 = CIRCLE('',#82889,7.E-02); +#82889 = AXIS2_PLACEMENT_3D('',#82890,#82891,#82892); +#82890 = CARTESIAN_POINT('',(-4.47,-0.9,0.338402894381)); +#82891 = DIRECTION('',(-1.,0.,-0.)); +#82892 = DIRECTION('',(0.,1.548860246408E-15,-1.)); +#82893 = ORIENTED_EDGE('',*,*,#82894,.T.); +#82894 = EDGE_CURVE('',#82886,#82895,#82897,.T.); +#82895 = VERTEX_POINT('',#82896); +#82896 = CARTESIAN_POINT('',(-4.47,-0.97,1.25)); +#82897 = LINE('',#82898,#82899); +#82898 = CARTESIAN_POINT('',(-4.47,-0.97,3.25)); +#82899 = VECTOR('',#82900,1.); +#82900 = DIRECTION('',(0.,-0.,1.)); +#82901 = ORIENTED_EDGE('',*,*,#82902,.T.); +#82902 = EDGE_CURVE('',#82895,#82691,#82903,.T.); +#82903 = CIRCLE('',#82904,0.23); +#82904 = AXIS2_PLACEMENT_3D('',#82905,#82906,#82907); +#82905 = CARTESIAN_POINT('',(-4.47,-1.2,1.25)); +#82906 = DIRECTION('',(1.,0.,0.)); +#82907 = DIRECTION('',(0.,0.,-1.)); +#82908 = PLANE('',#82909); +#82909 = AXIS2_PLACEMENT_3D('',#82910,#82911,#82912); +#82910 = CARTESIAN_POINT('',(-4.47,-4.7,3.25)); +#82911 = DIRECTION('',(1.,0.,0.)); +#82912 = DIRECTION('',(0.,0.,-1.)); +#82913 = ADVANCED_FACE('',(#82914),#82932,.T.); +#82914 = FACE_BOUND('',#82915,.T.); +#82915 = EDGE_LOOP('',(#82916,#82917,#82924,#82925)); +#82916 = ORIENTED_EDGE('',*,*,#82784,.T.); +#82917 = ORIENTED_EDGE('',*,*,#82918,.T.); +#82918 = EDGE_CURVE('',#82777,#82323,#82919,.T.); +#82919 = CIRCLE('',#82920,1.); +#82920 = AXIS2_PLACEMENT_3D('',#82921,#82922,#82923); +#82921 = CARTESIAN_POINT('',(-3.47,-4.67,2.25)); +#82922 = DIRECTION('',(0.,1.,0.)); +#82923 = DIRECTION('',(0.,-0.,1.)); +#82924 = ORIENTED_EDGE('',*,*,#82322,.F.); +#82925 = ORIENTED_EDGE('',*,*,#82926,.T.); +#82926 = EDGE_CURVE('',#82315,#82785,#82927,.T.); +#82927 = CIRCLE('',#82928,1.); +#82928 = AXIS2_PLACEMENT_3D('',#82929,#82930,#82931); +#82929 = CARTESIAN_POINT('',(-3.47,2.57,2.25)); +#82930 = DIRECTION('',(0.,-1.,0.)); +#82931 = DIRECTION('',(0.,0.,-1.)); +#82932 = CYLINDRICAL_SURFACE('',#82933,1.); +#82933 = AXIS2_PLACEMENT_3D('',#82934,#82935,#82936); +#82934 = CARTESIAN_POINT('',(-3.47,2.6,2.25)); +#82935 = DIRECTION('',(-0.,-1.,-0.)); +#82936 = DIRECTION('',(0.,0.,-1.)); +#82937 = ADVANCED_FACE('',(#82938),#82956,.T.); +#82938 = FACE_BOUND('',#82939,.T.); +#82939 = EDGE_LOOP('',(#82940,#82941,#82948,#82949)); +#82940 = ORIENTED_EDGE('',*,*,#82800,.F.); +#82941 = ORIENTED_EDGE('',*,*,#82942,.T.); +#82942 = EDGE_CURVE('',#82793,#79775,#82943,.T.); +#82943 = CIRCLE('',#82944,1.); +#82944 = AXIS2_PLACEMENT_3D('',#82945,#82946,#82947); +#82945 = CARTESIAN_POINT('',(-3.47,2.57,1.05)); +#82946 = DIRECTION('',(0.,-1.,0.)); +#82947 = DIRECTION('',(0.,0.,-1.)); +#82948 = ORIENTED_EDGE('',*,*,#79774,.T.); +#82949 = ORIENTED_EDGE('',*,*,#82950,.T.); +#82950 = EDGE_CURVE('',#79767,#82801,#82951,.T.); +#82951 = CIRCLE('',#82952,1.); +#82952 = AXIS2_PLACEMENT_3D('',#82953,#82954,#82955); +#82953 = CARTESIAN_POINT('',(-3.47,0.83,1.05)); +#82954 = DIRECTION('',(0.,1.,0.)); +#82955 = DIRECTION('',(0.,-0.,1.)); +#82956 = CYLINDRICAL_SURFACE('',#82957,1.); +#82957 = AXIS2_PLACEMENT_3D('',#82958,#82959,#82960); +#82958 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#82959 = DIRECTION('',(-0.,-1.,-0.)); +#82960 = DIRECTION('',(0.,0.,-1.)); +#82961 = ADVANCED_FACE('',(#82962),#82980,.F.); +#82962 = FACE_BOUND('',#82963,.F.); +#82963 = EDGE_LOOP('',(#82964,#82971,#82972,#82979)); +#82964 = ORIENTED_EDGE('',*,*,#82965,.F.); +#82965 = EDGE_CURVE('',#81688,#81382,#82966,.T.); +#82966 = CIRCLE('',#82967,0.7); +#82967 = AXIS2_PLACEMENT_3D('',#82968,#82969,#82970); +#82968 = CARTESIAN_POINT('',(-3.47,2.57,1.05)); +#82969 = DIRECTION('',(-0.,1.,0.)); +#82970 = DIRECTION('',(0.,0.,-1.)); +#82971 = ORIENTED_EDGE('',*,*,#81695,.T.); +#82972 = ORIENTED_EDGE('',*,*,#82973,.F.); +#82973 = EDGE_CURVE('',#81374,#81696,#82974,.T.); +#82974 = CIRCLE('',#82975,0.7); +#82975 = AXIS2_PLACEMENT_3D('',#82976,#82977,#82978); +#82976 = CARTESIAN_POINT('',(-3.47,0.83,1.05)); +#82977 = DIRECTION('',(0.,-1.,0.)); +#82978 = DIRECTION('',(0.,0.,1.)); +#82979 = ORIENTED_EDGE('',*,*,#81381,.F.); +#82980 = CYLINDRICAL_SURFACE('',#82981,0.7); +#82981 = AXIS2_PLACEMENT_3D('',#82982,#82983,#82984); +#82982 = CARTESIAN_POINT('',(-3.47,2.6,1.05)); +#82983 = DIRECTION('',(-0.,-1.,-0.)); +#82984 = DIRECTION('',(0.,0.,-1.)); +#82985 = ADVANCED_FACE('',(#82986),#83004,.F.); +#82986 = FACE_BOUND('',#82987,.F.); +#82987 = EDGE_LOOP('',(#82988,#82995,#82996,#83003)); +#82988 = ORIENTED_EDGE('',*,*,#82989,.F.); +#82989 = EDGE_CURVE('',#81390,#81422,#82990,.T.); +#82990 = CIRCLE('',#82991,0.7); +#82991 = AXIS2_PLACEMENT_3D('',#82992,#82993,#82994); +#82992 = CARTESIAN_POINT('',(-3.47,2.57,2.25)); +#82993 = DIRECTION('',(-0.,1.,0.)); +#82994 = DIRECTION('',(6.195440985631E-16,0.,-1.)); +#82995 = ORIENTED_EDGE('',*,*,#81397,.T.); +#82996 = ORIENTED_EDGE('',*,*,#82997,.F.); +#82997 = EDGE_CURVE('',#81414,#81244,#82998,.T.); +#82998 = CIRCLE('',#82999,0.7); +#82999 = AXIS2_PLACEMENT_3D('',#83000,#83001,#83002); +#83000 = CARTESIAN_POINT('',(-3.47,-1.45,2.25)); +#83001 = DIRECTION('',(0.,-1.,0.)); +#83002 = DIRECTION('',(0.,0.,1.)); +#83003 = ORIENTED_EDGE('',*,*,#81421,.F.); +#83004 = CYLINDRICAL_SURFACE('',#83005,0.7); +#83005 = AXIS2_PLACEMENT_3D('',#83006,#83007,#83008); +#83006 = CARTESIAN_POINT('',(-3.47,2.6,2.25)); +#83007 = DIRECTION('',(-0.,-1.,-0.)); +#83008 = DIRECTION('',(0.,0.,-1.)); +#83009 = ADVANCED_FACE('',(#83010),#83028,.F.); +#83010 = FACE_BOUND('',#83011,.F.); +#83011 = EDGE_LOOP('',(#83012,#83019,#83020,#83027)); +#83012 = ORIENTED_EDGE('',*,*,#83013,.F.); +#83013 = EDGE_CURVE('',#81430,#81462,#83014,.T.); +#83014 = CIRCLE('',#83015,0.7); +#83015 = AXIS2_PLACEMENT_3D('',#83016,#83017,#83018); +#83016 = CARTESIAN_POINT('',(3.47,2.57,2.25)); +#83017 = DIRECTION('',(-0.,1.,0.)); +#83018 = DIRECTION('',(0.,0.,-1.)); +#83019 = ORIENTED_EDGE('',*,*,#81437,.T.); +#83020 = ORIENTED_EDGE('',*,*,#83021,.F.); +#83021 = EDGE_CURVE('',#81454,#81412,#83022,.T.); +#83022 = CIRCLE('',#83023,0.7); +#83023 = AXIS2_PLACEMENT_3D('',#83024,#83025,#83026); +#83024 = CARTESIAN_POINT('',(3.47,-1.45,2.25)); +#83025 = DIRECTION('',(-0.,-1.,0.)); +#83026 = DIRECTION('',(2.230358754827E-14,-0.,1.)); +#83027 = ORIENTED_EDGE('',*,*,#81461,.F.); +#83028 = CYLINDRICAL_SURFACE('',#83029,0.7); +#83029 = AXIS2_PLACEMENT_3D('',#83030,#83031,#83032); +#83030 = CARTESIAN_POINT('',(3.47,2.6,2.25)); +#83031 = DIRECTION('',(-0.,-1.,-0.)); +#83032 = DIRECTION('',(0.,0.,-1.)); +#83033 = ADVANCED_FACE('',(#83034),#83052,.F.); +#83034 = FACE_BOUND('',#83035,.F.); +#83035 = EDGE_LOOP('',(#83036,#83043,#83044,#83051)); +#83036 = ORIENTED_EDGE('',*,*,#83037,.F.); +#83037 = EDGE_CURVE('',#81598,#81630,#83038,.T.); +#83038 = CIRCLE('',#83039,0.7); +#83039 = AXIS2_PLACEMENT_3D('',#83040,#83041,#83042); +#83040 = CARTESIAN_POINT('',(3.47,-1.43,1.05)); +#83041 = DIRECTION('',(-4.480174266469E-17,1.,0.)); +#83042 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83043 = ORIENTED_EDGE('',*,*,#81605,.T.); +#83044 = ORIENTED_EDGE('',*,*,#83045,.F.); +#83045 = EDGE_CURVE('',#81622,#81452,#83046,.T.); +#83046 = CIRCLE('',#83047,0.7); +#83047 = AXIS2_PLACEMENT_3D('',#83048,#83049,#83050); +#83048 = CARTESIAN_POINT('',(3.47,-1.45,1.05)); +#83049 = DIRECTION('',(-0.,-1.,0.)); +#83050 = DIRECTION('',(-6.195440985631E-16,0.,1.)); +#83051 = ORIENTED_EDGE('',*,*,#81629,.F.); +#83052 = CYLINDRICAL_SURFACE('',#83053,0.7); +#83053 = AXIS2_PLACEMENT_3D('',#83054,#83055,#83056); +#83054 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#83055 = DIRECTION('',(-0.,-1.,-0.)); +#83056 = DIRECTION('',(0.,0.,-1.)); +#83057 = ADVANCED_FACE('',(#83058),#83076,.T.); +#83058 = FACE_BOUND('',#83059,.T.); +#83059 = EDGE_LOOP('',(#83060,#83061,#83068,#83069)); +#83060 = ORIENTED_EDGE('',*,*,#79708,.F.); +#83061 = ORIENTED_EDGE('',*,*,#83062,.T.); +#83062 = EDGE_CURVE('',#79701,#82483,#83063,.T.); +#83063 = CIRCLE('',#83064,1.); +#83064 = AXIS2_PLACEMENT_3D('',#83065,#83066,#83067); +#83065 = CARTESIAN_POINT('',(3.47,-1.43,1.05)); +#83066 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#83067 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83068 = ORIENTED_EDGE('',*,*,#82482,.T.); +#83069 = ORIENTED_EDGE('',*,*,#83070,.T.); +#83070 = EDGE_CURVE('',#82475,#79709,#83071,.T.); +#83071 = CIRCLE('',#83072,1.); +#83072 = AXIS2_PLACEMENT_3D('',#83073,#83074,#83075); +#83073 = CARTESIAN_POINT('',(3.47,-3.17,1.05)); +#83074 = DIRECTION('',(0.,1.,-0.)); +#83075 = DIRECTION('',(0.,0.,1.)); +#83076 = CYLINDRICAL_SURFACE('',#83077,1.); +#83077 = AXIS2_PLACEMENT_3D('',#83078,#83079,#83080); +#83078 = CARTESIAN_POINT('',(3.47,2.6,1.05)); +#83079 = DIRECTION('',(-0.,-1.,-0.)); +#83080 = DIRECTION('',(0.,0.,-1.)); +#83081 = ADVANCED_FACE('',(#83082),#83100,.T.); +#83082 = FACE_BOUND('',#83083,.T.); +#83083 = EDGE_LOOP('',(#83084,#83085,#83092,#83093)); +#83084 = ORIENTED_EDGE('',*,*,#82306,.T.); +#83085 = ORIENTED_EDGE('',*,*,#83086,.T.); +#83086 = EDGE_CURVE('',#82299,#82618,#83087,.T.); +#83087 = CIRCLE('',#83088,1.); +#83088 = AXIS2_PLACEMENT_3D('',#83089,#83090,#83091); +#83089 = CARTESIAN_POINT('',(3.47,-4.67,2.25)); +#83090 = DIRECTION('',(0.,1.,0.)); +#83091 = DIRECTION('',(0.,-0.,1.)); +#83092 = ORIENTED_EDGE('',*,*,#82617,.F.); +#83093 = ORIENTED_EDGE('',*,*,#83094,.T.); +#83094 = EDGE_CURVE('',#82610,#82307,#83095,.T.); +#83095 = CIRCLE('',#83096,1.); +#83096 = AXIS2_PLACEMENT_3D('',#83097,#83098,#83099); +#83097 = CARTESIAN_POINT('',(3.47,2.57,2.25)); +#83098 = DIRECTION('',(0.,-1.,0.)); +#83099 = DIRECTION('',(0.,0.,-1.)); +#83100 = CYLINDRICAL_SURFACE('',#83101,1.); +#83101 = AXIS2_PLACEMENT_3D('',#83102,#83103,#83104); +#83102 = CARTESIAN_POINT('',(3.47,2.6,2.25)); +#83103 = DIRECTION('',(-0.,-1.,-0.)); +#83104 = DIRECTION('',(0.,0.,-1.)); +#83105 = ADVANCED_FACE('',(#83106),#83142,.F.); +#83106 = FACE_BOUND('',#83107,.F.); +#83107 = EDGE_LOOP('',(#83108,#83119,#83127,#83136)); +#83108 = ORIENTED_EDGE('',*,*,#83109,.F.); +#83109 = EDGE_CURVE('',#83110,#83112,#83114,.T.); +#83110 = VERTEX_POINT('',#83111); +#83111 = CARTESIAN_POINT('',(2.2,0.8,0.32)); +#83112 = VERTEX_POINT('',#83113); +#83113 = CARTESIAN_POINT('',(1.9,0.5,0.32)); +#83114 = CIRCLE('',#83115,0.3); +#83115 = AXIS2_PLACEMENT_3D('',#83116,#83117,#83118); +#83116 = CARTESIAN_POINT('',(2.2,0.5,0.32)); +#83117 = DIRECTION('',(0.,-0.,1.)); +#83118 = DIRECTION('',(-1.,1.951563910474E-14,0.)); +#83119 = ORIENTED_EDGE('',*,*,#83120,.T.); +#83120 = EDGE_CURVE('',#83110,#83121,#83123,.T.); +#83121 = VERTEX_POINT('',#83122); +#83122 = CARTESIAN_POINT('',(2.2,0.8,8.E-02)); +#83123 = LINE('',#83124,#83125); +#83124 = CARTESIAN_POINT('',(2.2,0.8,12.314965526686)); +#83125 = VECTOR('',#83126,1.); +#83126 = DIRECTION('',(-0.,-0.,-1.)); +#83127 = ORIENTED_EDGE('',*,*,#83128,.F.); +#83128 = EDGE_CURVE('',#83129,#83121,#83131,.T.); +#83129 = VERTEX_POINT('',#83130); +#83130 = CARTESIAN_POINT('',(1.9,0.5,8.E-02)); +#83131 = CIRCLE('',#83132,0.3); +#83132 = AXIS2_PLACEMENT_3D('',#83133,#83134,#83135); +#83133 = CARTESIAN_POINT('',(2.2,0.5,8.E-02)); +#83134 = DIRECTION('',(0.,0.,-1.)); +#83135 = DIRECTION('',(-1.,0.,0.)); +#83136 = ORIENTED_EDGE('',*,*,#83137,.F.); +#83137 = EDGE_CURVE('',#83112,#83129,#83138,.T.); +#83138 = LINE('',#83139,#83140); +#83139 = CARTESIAN_POINT('',(1.9,0.5,12.314965526686)); +#83140 = VECTOR('',#83141,1.); +#83141 = DIRECTION('',(-0.,-0.,-1.)); +#83142 = CYLINDRICAL_SURFACE('',#83143,0.3); +#83143 = AXIS2_PLACEMENT_3D('',#83144,#83145,#83146); +#83144 = CARTESIAN_POINT('',(2.2,0.5,12.314965526686)); +#83145 = DIRECTION('',(-0.,-0.,-1.)); +#83146 = DIRECTION('',(-1.,0.,0.)); +#83147 = ADVANCED_FACE('',(#83148),#83173,.F.); +#83148 = FACE_BOUND('',#83149,.T.); +#83149 = EDGE_LOOP('',(#83150,#83160,#83166,#83167)); +#83150 = ORIENTED_EDGE('',*,*,#83151,.T.); +#83151 = EDGE_CURVE('',#83152,#83154,#83156,.T.); +#83152 = VERTEX_POINT('',#83153); +#83153 = CARTESIAN_POINT('',(1.9,-1.1,0.32)); +#83154 = VERTEX_POINT('',#83155); +#83155 = CARTESIAN_POINT('',(1.9,-1.1,8.E-02)); +#83156 = LINE('',#83157,#83158); +#83157 = CARTESIAN_POINT('',(1.9,-1.1,12.314965526686)); +#83158 = VECTOR('',#83159,1.); +#83159 = DIRECTION('',(-0.,-0.,-1.)); +#83160 = ORIENTED_EDGE('',*,*,#83161,.T.); +#83161 = EDGE_CURVE('',#83154,#83129,#83162,.T.); +#83162 = LINE('',#83163,#83164); +#83163 = CARTESIAN_POINT('',(1.9,0.5,8.E-02)); +#83164 = VECTOR('',#83165,1.); +#83165 = DIRECTION('',(0.,1.,0.)); +#83166 = ORIENTED_EDGE('',*,*,#83137,.F.); +#83167 = ORIENTED_EDGE('',*,*,#83168,.T.); +#83168 = EDGE_CURVE('',#83112,#83152,#83169,.T.); +#83169 = LINE('',#83170,#83171); +#83170 = CARTESIAN_POINT('',(1.9,0.5,0.32)); +#83171 = VECTOR('',#83172,1.); +#83172 = DIRECTION('',(-0.,-1.,-0.)); +#83173 = PLANE('',#83174); +#83174 = AXIS2_PLACEMENT_3D('',#83175,#83176,#83177); +#83175 = CARTESIAN_POINT('',(1.9,0.5,12.314965526686)); +#83176 = DIRECTION('',(-1.,0.,0.)); +#83177 = DIRECTION('',(0.,0.,1.)); +#83178 = ADVANCED_FACE('',(#83179),#83206,.F.); +#83179 = FACE_BOUND('',#83180,.F.); +#83180 = EDGE_LOOP('',(#83181,#83190,#83191,#83200)); +#83181 = ORIENTED_EDGE('',*,*,#83182,.F.); +#83182 = EDGE_CURVE('',#83152,#83183,#83185,.T.); +#83183 = VERTEX_POINT('',#83184); +#83184 = CARTESIAN_POINT('',(2.2,-1.4,0.32)); +#83185 = CIRCLE('',#83186,0.3); +#83186 = AXIS2_PLACEMENT_3D('',#83187,#83188,#83189); +#83187 = CARTESIAN_POINT('',(2.2,-1.1,0.32)); +#83188 = DIRECTION('',(0.,-0.,1.)); +#83189 = DIRECTION('',(-1.,0.,0.)); +#83190 = ORIENTED_EDGE('',*,*,#83151,.T.); +#83191 = ORIENTED_EDGE('',*,*,#83192,.F.); +#83192 = EDGE_CURVE('',#83193,#83154,#83195,.T.); +#83193 = VERTEX_POINT('',#83194); +#83194 = CARTESIAN_POINT('',(2.2,-1.4,8.E-02)); +#83195 = CIRCLE('',#83196,0.3); +#83196 = AXIS2_PLACEMENT_3D('',#83197,#83198,#83199); +#83197 = CARTESIAN_POINT('',(2.2,-1.1,8.E-02)); +#83198 = DIRECTION('',(0.,0.,-1.)); +#83199 = DIRECTION('',(-1.,0.,0.)); +#83200 = ORIENTED_EDGE('',*,*,#83201,.F.); +#83201 = EDGE_CURVE('',#83183,#83193,#83202,.T.); +#83202 = LINE('',#83203,#83204); +#83203 = CARTESIAN_POINT('',(2.2,-1.4,12.314965526686)); +#83204 = VECTOR('',#83205,1.); +#83205 = DIRECTION('',(-0.,-0.,-1.)); +#83206 = CYLINDRICAL_SURFACE('',#83207,0.3); +#83207 = AXIS2_PLACEMENT_3D('',#83208,#83209,#83210); +#83208 = CARTESIAN_POINT('',(2.2,-1.1,12.314965526686)); +#83209 = DIRECTION('',(-0.,-0.,-1.)); +#83210 = DIRECTION('',(-1.,0.,0.)); +#83211 = ADVANCED_FACE('',(#83212),#83271,.F.); +#83212 = FACE_BOUND('',#83213,.T.); +#83213 = EDGE_LOOP('',(#83214,#83215,#83223,#83232,#83240,#83248,#83256, + #83265)); +#83214 = ORIENTED_EDGE('',*,*,#83120,.T.); +#83215 = ORIENTED_EDGE('',*,*,#83216,.T.); +#83216 = EDGE_CURVE('',#83121,#83217,#83219,.T.); +#83217 = VERTEX_POINT('',#83218); +#83218 = CARTESIAN_POINT('',(3.47,0.8,8.E-02)); +#83219 = LINE('',#83220,#83221); +#83220 = CARTESIAN_POINT('',(3.47,0.8,8.E-02)); +#83221 = VECTOR('',#83222,1.); +#83222 = DIRECTION('',(1.,-0.,0.)); +#83223 = ORIENTED_EDGE('',*,*,#83224,.T.); +#83224 = EDGE_CURVE('',#83217,#83225,#83227,.T.); +#83225 = VERTEX_POINT('',#83226); +#83226 = CARTESIAN_POINT('',(4.44,0.8,1.05)); +#83227 = CIRCLE('',#83228,0.97); +#83228 = AXIS2_PLACEMENT_3D('',#83229,#83230,#83231); +#83229 = CARTESIAN_POINT('',(3.47,0.8,1.05)); +#83230 = DIRECTION('',(0.,-1.,0.)); +#83231 = DIRECTION('',(0.,0.,1.)); +#83232 = ORIENTED_EDGE('',*,*,#83233,.T.); +#83233 = EDGE_CURVE('',#83225,#83234,#83236,.T.); +#83234 = VERTEX_POINT('',#83235); +#83235 = CARTESIAN_POINT('',(4.44,0.8,1.25)); +#83236 = LINE('',#83237,#83238); +#83237 = CARTESIAN_POINT('',(4.44,0.8,12.314965526686)); +#83238 = VECTOR('',#83239,1.); +#83239 = DIRECTION('',(-0.,0.,1.)); +#83240 = ORIENTED_EDGE('',*,*,#83241,.T.); +#83241 = EDGE_CURVE('',#83234,#83242,#83244,.T.); +#83242 = VERTEX_POINT('',#83243); +#83243 = CARTESIAN_POINT('',(4.2,0.8,1.25)); +#83244 = LINE('',#83245,#83246); +#83245 = CARTESIAN_POINT('',(7.04,0.8,1.25)); +#83246 = VECTOR('',#83247,1.); +#83247 = DIRECTION('',(-1.,0.,0.)); +#83248 = ORIENTED_EDGE('',*,*,#83249,.T.); +#83249 = EDGE_CURVE('',#83242,#83250,#83252,.T.); +#83250 = VERTEX_POINT('',#83251); +#83251 = CARTESIAN_POINT('',(4.2,0.8,1.05)); +#83252 = LINE('',#83253,#83254); +#83253 = CARTESIAN_POINT('',(4.2,0.8,12.314965526686)); +#83254 = VECTOR('',#83255,1.); +#83255 = DIRECTION('',(-0.,-0.,-1.)); +#83256 = ORIENTED_EDGE('',*,*,#83257,.T.); +#83257 = EDGE_CURVE('',#83250,#83258,#83260,.T.); +#83258 = VERTEX_POINT('',#83259); +#83259 = CARTESIAN_POINT('',(3.47,0.8,0.32)); +#83260 = CIRCLE('',#83261,0.73); +#83261 = AXIS2_PLACEMENT_3D('',#83262,#83263,#83264); +#83262 = CARTESIAN_POINT('',(3.47,0.8,1.05)); +#83263 = DIRECTION('',(0.,1.,-0.)); +#83264 = DIRECTION('',(0.,0.,1.)); +#83265 = ORIENTED_EDGE('',*,*,#83266,.T.); +#83266 = EDGE_CURVE('',#83258,#83110,#83267,.T.); +#83267 = LINE('',#83268,#83269); +#83268 = CARTESIAN_POINT('',(7.04,0.8,0.32)); +#83269 = VECTOR('',#83270,1.); +#83270 = DIRECTION('',(-1.,-0.,-0.)); +#83271 = PLANE('',#83272); +#83272 = AXIS2_PLACEMENT_3D('',#83273,#83274,#83275); +#83273 = CARTESIAN_POINT('',(7.04,0.8,12.314965526686)); +#83274 = DIRECTION('',(0.,1.,-0.)); +#83275 = DIRECTION('',(0.,0.,1.)); +#83276 = ADVANCED_FACE('',(#83277),#83336,.F.); +#83277 = FACE_BOUND('',#83278,.T.); +#83278 = EDGE_LOOP('',(#83279,#83289,#83297,#83306,#83312,#83313,#83321, + #83330)); +#83279 = ORIENTED_EDGE('',*,*,#83280,.T.); +#83280 = EDGE_CURVE('',#83281,#83283,#83285,.T.); +#83281 = VERTEX_POINT('',#83282); +#83282 = CARTESIAN_POINT('',(4.2,-1.4,1.25)); +#83283 = VERTEX_POINT('',#83284); +#83284 = CARTESIAN_POINT('',(4.44,-1.4,1.25)); +#83285 = LINE('',#83286,#83287); +#83286 = CARTESIAN_POINT('',(7.04,-1.4,1.25)); +#83287 = VECTOR('',#83288,1.); +#83288 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83289 = ORIENTED_EDGE('',*,*,#83290,.T.); +#83290 = EDGE_CURVE('',#83283,#83291,#83293,.T.); +#83291 = VERTEX_POINT('',#83292); +#83292 = CARTESIAN_POINT('',(4.44,-1.4,1.05)); +#83293 = LINE('',#83294,#83295); +#83294 = CARTESIAN_POINT('',(4.44,-1.4,12.314965526686)); +#83295 = VECTOR('',#83296,1.); +#83296 = DIRECTION('',(-0.,-0.,-1.)); +#83297 = ORIENTED_EDGE('',*,*,#83298,.T.); +#83298 = EDGE_CURVE('',#83291,#83299,#83301,.T.); +#83299 = VERTEX_POINT('',#83300); +#83300 = CARTESIAN_POINT('',(3.47,-1.4,8.E-02)); +#83301 = CIRCLE('',#83302,0.97); +#83302 = AXIS2_PLACEMENT_3D('',#83303,#83304,#83305); +#83303 = CARTESIAN_POINT('',(3.47,-1.4,1.05)); +#83304 = DIRECTION('',(-4.480174266469E-17,1.,0.)); +#83305 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83306 = ORIENTED_EDGE('',*,*,#83307,.T.); +#83307 = EDGE_CURVE('',#83299,#83193,#83308,.T.); +#83308 = LINE('',#83309,#83310); +#83309 = CARTESIAN_POINT('',(2.2,-1.4,8.E-02)); +#83310 = VECTOR('',#83311,1.); +#83311 = DIRECTION('',(-1.,-4.480174266469E-17,0.)); +#83312 = ORIENTED_EDGE('',*,*,#83201,.F.); +#83313 = ORIENTED_EDGE('',*,*,#83314,.T.); +#83314 = EDGE_CURVE('',#83183,#83315,#83317,.T.); +#83315 = VERTEX_POINT('',#83316); +#83316 = CARTESIAN_POINT('',(3.47,-1.4,0.32)); +#83317 = LINE('',#83318,#83319); +#83318 = CARTESIAN_POINT('',(7.04,-1.4,0.32)); +#83319 = VECTOR('',#83320,1.); +#83320 = DIRECTION('',(1.,4.480174266469E-17,-0.)); +#83321 = ORIENTED_EDGE('',*,*,#83322,.T.); +#83322 = EDGE_CURVE('',#83315,#83323,#83325,.T.); +#83323 = VERTEX_POINT('',#83324); +#83324 = CARTESIAN_POINT('',(4.2,-1.4,1.05)); +#83325 = CIRCLE('',#83326,0.73); +#83326 = AXIS2_PLACEMENT_3D('',#83327,#83328,#83329); +#83327 = CARTESIAN_POINT('',(3.47,-1.4,1.05)); +#83328 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#83329 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83330 = ORIENTED_EDGE('',*,*,#83331,.T.); +#83331 = EDGE_CURVE('',#83323,#83281,#83332,.T.); +#83332 = LINE('',#83333,#83334); +#83333 = CARTESIAN_POINT('',(4.2,-1.4,12.314965526686)); +#83334 = VECTOR('',#83335,1.); +#83335 = DIRECTION('',(-0.,-0.,1.)); +#83336 = PLANE('',#83337); +#83337 = AXIS2_PLACEMENT_3D('',#83338,#83339,#83340); +#83338 = CARTESIAN_POINT('',(7.04,-1.4,12.314965526686)); +#83339 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#83340 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#83341 = ADVANCED_FACE('',(#83342),#83444,.F.); +#83342 = FACE_BOUND('',#83343,.T.); +#83343 = EDGE_LOOP('',(#83344,#83354,#83362,#83371,#83379,#83388,#83396, + #83404,#83412,#83421,#83429,#83438)); +#83344 = ORIENTED_EDGE('',*,*,#83345,.T.); +#83345 = EDGE_CURVE('',#83346,#83348,#83350,.T.); +#83346 = VERTEX_POINT('',#83347); +#83347 = CARTESIAN_POINT('',(4.44,-3.2,1.25)); +#83348 = VERTEX_POINT('',#83349); +#83349 = CARTESIAN_POINT('',(4.2,-3.2,1.25)); +#83350 = LINE('',#83351,#83352); +#83351 = CARTESIAN_POINT('',(4.47,-3.2,1.25)); +#83352 = VECTOR('',#83353,1.); +#83353 = DIRECTION('',(-1.,0.,0.)); +#83354 = ORIENTED_EDGE('',*,*,#83355,.T.); +#83355 = EDGE_CURVE('',#83348,#83356,#83358,.T.); +#83356 = VERTEX_POINT('',#83357); +#83357 = CARTESIAN_POINT('',(4.2,-3.2,1.05)); +#83358 = LINE('',#83359,#83360); +#83359 = CARTESIAN_POINT('',(4.2,-3.2,12.314965526686)); +#83360 = VECTOR('',#83361,1.); +#83361 = DIRECTION('',(-0.,-0.,-1.)); +#83362 = ORIENTED_EDGE('',*,*,#83363,.T.); +#83363 = EDGE_CURVE('',#83356,#83364,#83366,.T.); +#83364 = VERTEX_POINT('',#83365); +#83365 = CARTESIAN_POINT('',(3.47,-3.2,0.32)); +#83366 = CIRCLE('',#83367,0.73); +#83367 = AXIS2_PLACEMENT_3D('',#83368,#83369,#83370); +#83368 = CARTESIAN_POINT('',(3.47,-3.2,1.05)); +#83369 = DIRECTION('',(0.,1.,-0.)); +#83370 = DIRECTION('',(0.,0.,1.)); +#83371 = ORIENTED_EDGE('',*,*,#83372,.T.); +#83372 = EDGE_CURVE('',#83364,#83373,#83375,.T.); +#83373 = VERTEX_POINT('',#83374); +#83374 = CARTESIAN_POINT('',(-3.47,-3.2,0.32)); +#83375 = LINE('',#83376,#83377); +#83376 = CARTESIAN_POINT('',(4.47,-3.2,0.32)); +#83377 = VECTOR('',#83378,1.); +#83378 = DIRECTION('',(-1.,-0.,-0.)); +#83379 = ORIENTED_EDGE('',*,*,#83380,.T.); +#83380 = EDGE_CURVE('',#83373,#83381,#83383,.T.); +#83381 = VERTEX_POINT('',#83382); +#83382 = CARTESIAN_POINT('',(-4.2,-3.2,1.05)); +#83383 = CIRCLE('',#83384,0.73); +#83384 = AXIS2_PLACEMENT_3D('',#83385,#83386,#83387); +#83385 = CARTESIAN_POINT('',(-3.47,-3.2,1.05)); +#83386 = DIRECTION('',(0.,1.,-0.)); +#83387 = DIRECTION('',(0.,0.,1.)); +#83388 = ORIENTED_EDGE('',*,*,#83389,.T.); +#83389 = EDGE_CURVE('',#83381,#83390,#83392,.T.); +#83390 = VERTEX_POINT('',#83391); +#83391 = CARTESIAN_POINT('',(-4.2,-3.2,1.25)); +#83392 = LINE('',#83393,#83394); +#83393 = CARTESIAN_POINT('',(-4.2,-3.2,12.314965526686)); +#83394 = VECTOR('',#83395,1.); +#83395 = DIRECTION('',(-0.,0.,1.)); +#83396 = ORIENTED_EDGE('',*,*,#83397,.T.); +#83397 = EDGE_CURVE('',#83390,#83398,#83400,.T.); +#83398 = VERTEX_POINT('',#83399); +#83399 = CARTESIAN_POINT('',(-4.44,-3.2,1.25)); +#83400 = LINE('',#83401,#83402); +#83401 = CARTESIAN_POINT('',(4.47,-3.2,1.25)); +#83402 = VECTOR('',#83403,1.); +#83403 = DIRECTION('',(-1.,0.,0.)); +#83404 = ORIENTED_EDGE('',*,*,#83405,.T.); +#83405 = EDGE_CURVE('',#83398,#83406,#83408,.T.); +#83406 = VERTEX_POINT('',#83407); +#83407 = CARTESIAN_POINT('',(-4.44,-3.2,1.05)); +#83408 = LINE('',#83409,#83410); +#83409 = CARTESIAN_POINT('',(-4.44,-3.2,12.314965526686)); +#83410 = VECTOR('',#83411,1.); +#83411 = DIRECTION('',(0.,-0.,-1.)); +#83412 = ORIENTED_EDGE('',*,*,#83413,.T.); +#83413 = EDGE_CURVE('',#83406,#83414,#83416,.T.); +#83414 = VERTEX_POINT('',#83415); +#83415 = CARTESIAN_POINT('',(-3.47,-3.2,8.E-02)); +#83416 = CIRCLE('',#83417,0.97); +#83417 = AXIS2_PLACEMENT_3D('',#83418,#83419,#83420); +#83418 = CARTESIAN_POINT('',(-3.47,-3.2,1.05)); +#83419 = DIRECTION('',(0.,-1.,0.)); +#83420 = DIRECTION('',(0.,0.,1.)); +#83421 = ORIENTED_EDGE('',*,*,#83422,.T.); +#83422 = EDGE_CURVE('',#83414,#83423,#83425,.T.); +#83423 = VERTEX_POINT('',#83424); +#83424 = CARTESIAN_POINT('',(3.47,-3.2,8.E-02)); +#83425 = LINE('',#83426,#83427); +#83426 = CARTESIAN_POINT('',(3.47,-3.2,8.E-02)); +#83427 = VECTOR('',#83428,1.); +#83428 = DIRECTION('',(1.,-0.,0.)); +#83429 = ORIENTED_EDGE('',*,*,#83430,.T.); +#83430 = EDGE_CURVE('',#83423,#83431,#83433,.T.); +#83431 = VERTEX_POINT('',#83432); +#83432 = CARTESIAN_POINT('',(4.44,-3.2,1.05)); +#83433 = CIRCLE('',#83434,0.97); +#83434 = AXIS2_PLACEMENT_3D('',#83435,#83436,#83437); +#83435 = CARTESIAN_POINT('',(3.47,-3.2,1.05)); +#83436 = DIRECTION('',(0.,-1.,0.)); +#83437 = DIRECTION('',(0.,0.,1.)); +#83438 = ORIENTED_EDGE('',*,*,#83439,.T.); +#83439 = EDGE_CURVE('',#83431,#83346,#83440,.T.); +#83440 = LINE('',#83441,#83442); +#83441 = CARTESIAN_POINT('',(4.44,-3.2,12.314965526686)); +#83442 = VECTOR('',#83443,1.); +#83443 = DIRECTION('',(-0.,0.,1.)); +#83444 = PLANE('',#83445); +#83445 = AXIS2_PLACEMENT_3D('',#83446,#83447,#83448); +#83446 = CARTESIAN_POINT('',(4.47,-3.2,12.314965526686)); +#83447 = DIRECTION('',(0.,1.,-0.)); +#83448 = DIRECTION('',(0.,0.,1.)); +#83449 = ADVANCED_FACE('',(#83450),#83518,.F.); +#83450 = FACE_BOUND('',#83451,.T.); +#83451 = EDGE_LOOP('',(#83452,#83462,#83470,#83479,#83487,#83495,#83503, + #83512)); +#83452 = ORIENTED_EDGE('',*,*,#83453,.T.); +#83453 = EDGE_CURVE('',#83454,#83456,#83458,.T.); +#83454 = VERTEX_POINT('',#83455); +#83455 = CARTESIAN_POINT('',(-2.2,-1.4,0.32)); +#83456 = VERTEX_POINT('',#83457); +#83457 = CARTESIAN_POINT('',(-2.2,-1.4,8.E-02)); +#83458 = LINE('',#83459,#83460); +#83459 = CARTESIAN_POINT('',(-2.2,-1.4,12.314965526686)); +#83460 = VECTOR('',#83461,1.); +#83461 = DIRECTION('',(-0.,-0.,-1.)); +#83462 = ORIENTED_EDGE('',*,*,#83463,.T.); +#83463 = EDGE_CURVE('',#83456,#83464,#83466,.T.); +#83464 = VERTEX_POINT('',#83465); +#83465 = CARTESIAN_POINT('',(-3.47,-1.4,8.E-02)); +#83466 = LINE('',#83467,#83468); +#83467 = CARTESIAN_POINT('',(-3.47,-1.4,8.E-02)); +#83468 = VECTOR('',#83469,1.); +#83469 = DIRECTION('',(-1.,3.136121986528E-16,0.)); +#83470 = ORIENTED_EDGE('',*,*,#83471,.T.); +#83471 = EDGE_CURVE('',#83464,#83472,#83474,.T.); +#83472 = VERTEX_POINT('',#83473); +#83473 = CARTESIAN_POINT('',(-4.44,-1.4,1.05)); +#83474 = CIRCLE('',#83475,0.97); +#83475 = AXIS2_PLACEMENT_3D('',#83476,#83477,#83478); +#83476 = CARTESIAN_POINT('',(-3.47,-1.4,1.05)); +#83477 = DIRECTION('',(3.136121986528E-16,1.,0.)); +#83478 = DIRECTION('',(1.,-3.136121986528E-16,8.941873587509E-16)); +#83479 = ORIENTED_EDGE('',*,*,#83480,.T.); +#83480 = EDGE_CURVE('',#83472,#83481,#83483,.T.); +#83481 = VERTEX_POINT('',#83482); +#83482 = CARTESIAN_POINT('',(-4.44,-1.4,1.25)); +#83483 = LINE('',#83484,#83485); +#83484 = CARTESIAN_POINT('',(-4.44,-1.4,12.314965526686)); +#83485 = VECTOR('',#83486,1.); +#83486 = DIRECTION('',(-0.,-0.,1.)); +#83487 = ORIENTED_EDGE('',*,*,#83488,.T.); +#83488 = EDGE_CURVE('',#83481,#83489,#83491,.T.); +#83489 = VERTEX_POINT('',#83490); +#83490 = CARTESIAN_POINT('',(-4.2,-1.4,1.25)); +#83491 = LINE('',#83492,#83493); +#83492 = CARTESIAN_POINT('',(-7.04,-1.4,1.25)); +#83493 = VECTOR('',#83494,1.); +#83494 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#83495 = ORIENTED_EDGE('',*,*,#83496,.T.); +#83496 = EDGE_CURVE('',#83489,#83497,#83499,.T.); +#83497 = VERTEX_POINT('',#83498); +#83498 = CARTESIAN_POINT('',(-4.2,-1.4,1.05)); +#83499 = LINE('',#83500,#83501); +#83500 = CARTESIAN_POINT('',(-4.2,-1.4,12.314965526686)); +#83501 = VECTOR('',#83502,1.); +#83502 = DIRECTION('',(-0.,-0.,-1.)); +#83503 = ORIENTED_EDGE('',*,*,#83504,.T.); +#83504 = EDGE_CURVE('',#83497,#83505,#83507,.T.); +#83505 = VERTEX_POINT('',#83506); +#83506 = CARTESIAN_POINT('',(-3.47,-1.4,0.32)); +#83507 = CIRCLE('',#83508,0.73); +#83508 = AXIS2_PLACEMENT_3D('',#83509,#83510,#83511); +#83509 = CARTESIAN_POINT('',(-3.47,-1.4,1.05)); +#83510 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#83511 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#83512 = ORIENTED_EDGE('',*,*,#83513,.T.); +#83513 = EDGE_CURVE('',#83505,#83454,#83514,.T.); +#83514 = LINE('',#83515,#83516); +#83515 = CARTESIAN_POINT('',(-7.04,-1.4,0.32)); +#83516 = VECTOR('',#83517,1.); +#83517 = DIRECTION('',(1.,-3.136121986528E-16,-0.)); +#83518 = PLANE('',#83519); +#83519 = AXIS2_PLACEMENT_3D('',#83520,#83521,#83522); +#83520 = CARTESIAN_POINT('',(-7.04,-1.4,12.314965526686)); +#83521 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#83522 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#83523 = ADVANCED_FACE('',(#83524),#83551,.F.); +#83524 = FACE_BOUND('',#83525,.F.); +#83525 = EDGE_LOOP('',(#83526,#83535,#83536,#83545)); +#83526 = ORIENTED_EDGE('',*,*,#83527,.F.); +#83527 = EDGE_CURVE('',#83454,#83528,#83530,.T.); +#83528 = VERTEX_POINT('',#83529); +#83529 = CARTESIAN_POINT('',(-1.9,-1.1,0.32)); +#83530 = CIRCLE('',#83531,0.3); +#83531 = AXIS2_PLACEMENT_3D('',#83532,#83533,#83534); +#83532 = CARTESIAN_POINT('',(-2.2,-1.1,0.32)); +#83533 = DIRECTION('',(0.,-0.,1.)); +#83534 = DIRECTION('',(-1.,0.,0.)); +#83535 = ORIENTED_EDGE('',*,*,#83453,.T.); +#83536 = ORIENTED_EDGE('',*,*,#83537,.F.); +#83537 = EDGE_CURVE('',#83538,#83456,#83540,.T.); +#83538 = VERTEX_POINT('',#83539); +#83539 = CARTESIAN_POINT('',(-1.9,-1.1,8.E-02)); +#83540 = CIRCLE('',#83541,0.3); +#83541 = AXIS2_PLACEMENT_3D('',#83542,#83543,#83544); +#83542 = CARTESIAN_POINT('',(-2.2,-1.1,8.E-02)); +#83543 = DIRECTION('',(0.,0.,-1.)); +#83544 = DIRECTION('',(-1.,0.,0.)); +#83545 = ORIENTED_EDGE('',*,*,#83546,.F.); +#83546 = EDGE_CURVE('',#83528,#83538,#83547,.T.); +#83547 = LINE('',#83548,#83549); +#83548 = CARTESIAN_POINT('',(-1.9,-1.1,12.314965526686)); +#83549 = VECTOR('',#83550,1.); +#83550 = DIRECTION('',(-0.,-0.,-1.)); +#83551 = CYLINDRICAL_SURFACE('',#83552,0.3); +#83552 = AXIS2_PLACEMENT_3D('',#83553,#83554,#83555); +#83553 = CARTESIAN_POINT('',(-2.2,-1.1,12.314965526686)); +#83554 = DIRECTION('',(-0.,-0.,-1.)); +#83555 = DIRECTION('',(-1.,0.,0.)); +#83556 = ADVANCED_FACE('',(#83557),#83582,.F.); +#83557 = FACE_BOUND('',#83558,.T.); +#83558 = EDGE_LOOP('',(#83559,#83569,#83575,#83576)); +#83559 = ORIENTED_EDGE('',*,*,#83560,.T.); +#83560 = EDGE_CURVE('',#83561,#83563,#83565,.T.); +#83561 = VERTEX_POINT('',#83562); +#83562 = CARTESIAN_POINT('',(-1.9,0.5,0.32)); +#83563 = VERTEX_POINT('',#83564); +#83564 = CARTESIAN_POINT('',(-1.9,0.5,8.E-02)); +#83565 = LINE('',#83566,#83567); +#83566 = CARTESIAN_POINT('',(-1.9,0.5,12.314965526686)); +#83567 = VECTOR('',#83568,1.); +#83568 = DIRECTION('',(-0.,-0.,-1.)); +#83569 = ORIENTED_EDGE('',*,*,#83570,.T.); +#83570 = EDGE_CURVE('',#83563,#83538,#83571,.T.); +#83571 = LINE('',#83572,#83573); +#83572 = CARTESIAN_POINT('',(-1.9,-1.1,8.E-02)); +#83573 = VECTOR('',#83574,1.); +#83574 = DIRECTION('',(-5.421010862428E-16,-1.,0.)); +#83575 = ORIENTED_EDGE('',*,*,#83546,.F.); +#83576 = ORIENTED_EDGE('',*,*,#83577,.T.); +#83577 = EDGE_CURVE('',#83528,#83561,#83578,.T.); +#83578 = LINE('',#83579,#83580); +#83579 = CARTESIAN_POINT('',(-1.9,0.5,0.32)); +#83580 = VECTOR('',#83581,1.); +#83581 = DIRECTION('',(5.421010862428E-16,1.,-0.)); +#83582 = PLANE('',#83583); +#83583 = AXIS2_PLACEMENT_3D('',#83584,#83585,#83586); +#83584 = CARTESIAN_POINT('',(-1.9,0.5,12.314965526686)); +#83585 = DIRECTION('',(1.,-5.421010862428E-16,0.)); +#83586 = DIRECTION('',(5.421010862428E-16,1.,0.)); +#83587 = ADVANCED_FACE('',(#83588),#83615,.F.); +#83588 = FACE_BOUND('',#83589,.F.); +#83589 = EDGE_LOOP('',(#83590,#83599,#83600,#83609)); +#83590 = ORIENTED_EDGE('',*,*,#83591,.F.); +#83591 = EDGE_CURVE('',#83561,#83592,#83594,.T.); +#83592 = VERTEX_POINT('',#83593); +#83593 = CARTESIAN_POINT('',(-2.2,0.8,0.32)); +#83594 = CIRCLE('',#83595,0.3); +#83595 = AXIS2_PLACEMENT_3D('',#83596,#83597,#83598); +#83596 = CARTESIAN_POINT('',(-2.2,0.5,0.32)); +#83597 = DIRECTION('',(0.,-0.,1.)); +#83598 = DIRECTION('',(-1.,1.807003620809E-15,0.)); +#83599 = ORIENTED_EDGE('',*,*,#83560,.T.); +#83600 = ORIENTED_EDGE('',*,*,#83601,.F.); +#83601 = EDGE_CURVE('',#83602,#83563,#83604,.T.); +#83602 = VERTEX_POINT('',#83603); +#83603 = CARTESIAN_POINT('',(-2.2,0.8,8.E-02)); +#83604 = CIRCLE('',#83605,0.3); +#83605 = AXIS2_PLACEMENT_3D('',#83606,#83607,#83608); +#83606 = CARTESIAN_POINT('',(-2.2,0.5,8.E-02)); +#83607 = DIRECTION('',(0.,0.,-1.)); +#83608 = DIRECTION('',(-1.,0.,0.)); +#83609 = ORIENTED_EDGE('',*,*,#83610,.F.); +#83610 = EDGE_CURVE('',#83592,#83602,#83611,.T.); +#83611 = LINE('',#83612,#83613); +#83612 = CARTESIAN_POINT('',(-2.2,0.8,12.314965526686)); +#83613 = VECTOR('',#83614,1.); +#83614 = DIRECTION('',(-0.,-0.,-1.)); +#83615 = CYLINDRICAL_SURFACE('',#83616,0.3); +#83616 = AXIS2_PLACEMENT_3D('',#83617,#83618,#83619); +#83617 = CARTESIAN_POINT('',(-2.2,0.5,12.314965526686)); +#83618 = DIRECTION('',(-0.,-0.,-1.)); +#83619 = DIRECTION('',(-1.,0.,0.)); +#83620 = ADVANCED_FACE('',(#83621),#83680,.F.); +#83621 = FACE_BOUND('',#83622,.T.); +#83622 = EDGE_LOOP('',(#83623,#83624,#83632,#83641,#83649,#83657,#83665, + #83674)); +#83623 = ORIENTED_EDGE('',*,*,#83610,.F.); +#83624 = ORIENTED_EDGE('',*,*,#83625,.T.); +#83625 = EDGE_CURVE('',#83592,#83626,#83628,.T.); +#83626 = VERTEX_POINT('',#83627); +#83627 = CARTESIAN_POINT('',(-3.47,0.8,0.32)); +#83628 = LINE('',#83629,#83630); +#83629 = CARTESIAN_POINT('',(-7.04,0.8,0.32)); +#83630 = VECTOR('',#83631,1.); +#83631 = DIRECTION('',(-1.,0.,-0.)); +#83632 = ORIENTED_EDGE('',*,*,#83633,.T.); +#83633 = EDGE_CURVE('',#83626,#83634,#83636,.T.); +#83634 = VERTEX_POINT('',#83635); +#83635 = CARTESIAN_POINT('',(-4.2,0.8,1.05)); +#83636 = CIRCLE('',#83637,0.73); +#83637 = AXIS2_PLACEMENT_3D('',#83638,#83639,#83640); +#83638 = CARTESIAN_POINT('',(-3.47,0.8,1.05)); +#83639 = DIRECTION('',(0.,1.,0.)); +#83640 = DIRECTION('',(0.,-0.,1.)); +#83641 = ORIENTED_EDGE('',*,*,#83642,.T.); +#83642 = EDGE_CURVE('',#83634,#83643,#83645,.T.); +#83643 = VERTEX_POINT('',#83644); +#83644 = CARTESIAN_POINT('',(-4.2,0.8,1.25)); +#83645 = LINE('',#83646,#83647); +#83646 = CARTESIAN_POINT('',(-4.2,0.8,12.314965526686)); +#83647 = VECTOR('',#83648,1.); +#83648 = DIRECTION('',(-0.,-0.,1.)); +#83649 = ORIENTED_EDGE('',*,*,#83650,.T.); +#83650 = EDGE_CURVE('',#83643,#83651,#83653,.T.); +#83651 = VERTEX_POINT('',#83652); +#83652 = CARTESIAN_POINT('',(-4.44,0.8,1.25)); +#83653 = LINE('',#83654,#83655); +#83654 = CARTESIAN_POINT('',(-7.04,0.8,1.25)); +#83655 = VECTOR('',#83656,1.); +#83656 = DIRECTION('',(-1.,0.,0.)); +#83657 = ORIENTED_EDGE('',*,*,#83658,.T.); +#83658 = EDGE_CURVE('',#83651,#83659,#83661,.T.); +#83659 = VERTEX_POINT('',#83660); +#83660 = CARTESIAN_POINT('',(-4.44,0.8,1.05)); +#83661 = LINE('',#83662,#83663); +#83662 = CARTESIAN_POINT('',(-4.44,0.8,12.314965526686)); +#83663 = VECTOR('',#83664,1.); +#83664 = DIRECTION('',(-0.,0.,-1.)); +#83665 = ORIENTED_EDGE('',*,*,#83666,.T.); +#83666 = EDGE_CURVE('',#83659,#83667,#83669,.T.); +#83667 = VERTEX_POINT('',#83668); +#83668 = CARTESIAN_POINT('',(-3.47,0.8,8.E-02)); +#83669 = CIRCLE('',#83670,0.97); +#83670 = AXIS2_PLACEMENT_3D('',#83671,#83672,#83673); +#83671 = CARTESIAN_POINT('',(-3.47,0.8,1.05)); +#83672 = DIRECTION('',(0.,-1.,0.)); +#83673 = DIRECTION('',(0.,0.,1.)); +#83674 = ORIENTED_EDGE('',*,*,#83675,.T.); +#83675 = EDGE_CURVE('',#83667,#83602,#83676,.T.); +#83676 = LINE('',#83677,#83678); +#83677 = CARTESIAN_POINT('',(-2.2,0.8,8.E-02)); +#83678 = VECTOR('',#83679,1.); +#83679 = DIRECTION('',(1.,-0.,0.)); +#83680 = PLANE('',#83681); +#83681 = AXIS2_PLACEMENT_3D('',#83682,#83683,#83684); +#83682 = CARTESIAN_POINT('',(-7.04,0.8,12.314965526686)); +#83683 = DIRECTION('',(0.,1.,0.)); +#83684 = DIRECTION('',(0.,-0.,1.)); +#83685 = ADVANCED_FACE('',(#83686),#83720,.F.); +#83686 = FACE_BOUND('',#83687,.T.); +#83687 = EDGE_LOOP('',(#83688,#83698,#83706,#83714)); +#83688 = ORIENTED_EDGE('',*,*,#83689,.T.); +#83689 = EDGE_CURVE('',#83690,#83692,#83694,.T.); +#83690 = VERTEX_POINT('',#83691); +#83691 = CARTESIAN_POINT('',(4.2,0.4,1.25)); +#83692 = VERTEX_POINT('',#83693); +#83693 = CARTESIAN_POINT('',(4.44,0.4,1.25)); +#83694 = LINE('',#83695,#83696); +#83695 = CARTESIAN_POINT('',(4.47,0.4,1.25)); +#83696 = VECTOR('',#83697,1.); +#83697 = DIRECTION('',(1.,0.,0.)); +#83698 = ORIENTED_EDGE('',*,*,#83699,.T.); +#83699 = EDGE_CURVE('',#83692,#83700,#83702,.T.); +#83700 = VERTEX_POINT('',#83701); +#83701 = CARTESIAN_POINT('',(4.44,0.4,-0.45)); +#83702 = LINE('',#83703,#83704); +#83703 = CARTESIAN_POINT('',(4.44,0.4,-0.85)); +#83704 = VECTOR('',#83705,1.); +#83705 = DIRECTION('',(-0.,-0.,-1.)); +#83706 = ORIENTED_EDGE('',*,*,#83707,.T.); +#83707 = EDGE_CURVE('',#83700,#83708,#83710,.T.); +#83708 = VERTEX_POINT('',#83709); +#83709 = CARTESIAN_POINT('',(4.2,0.4,-0.45)); +#83710 = LINE('',#83711,#83712); +#83711 = CARTESIAN_POINT('',(4.17,0.4,-0.45)); +#83712 = VECTOR('',#83713,1.); +#83713 = DIRECTION('',(-1.,-0.,-0.)); +#83714 = ORIENTED_EDGE('',*,*,#83715,.T.); +#83715 = EDGE_CURVE('',#83708,#83690,#83716,.T.); +#83716 = LINE('',#83717,#83718); +#83717 = CARTESIAN_POINT('',(4.2,0.4,-0.85)); +#83718 = VECTOR('',#83719,1.); +#83719 = DIRECTION('',(0.,0.,1.)); +#83720 = PLANE('',#83721); +#83721 = AXIS2_PLACEMENT_3D('',#83722,#83723,#83724); +#83722 = CARTESIAN_POINT('',(4.47,0.4,-0.85)); +#83723 = DIRECTION('',(0.,-1.,-0.)); +#83724 = DIRECTION('',(0.,0.,-1.)); +#83725 = ADVANCED_FACE('',(#83726),#83760,.F.); +#83726 = FACE_BOUND('',#83727,.T.); +#83727 = EDGE_LOOP('',(#83728,#83738,#83746,#83754)); +#83728 = ORIENTED_EDGE('',*,*,#83729,.T.); +#83729 = EDGE_CURVE('',#83730,#83732,#83734,.T.); +#83730 = VERTEX_POINT('',#83731); +#83731 = CARTESIAN_POINT('',(4.2,-1.,0.338402894381)); +#83732 = VERTEX_POINT('',#83733); +#83733 = CARTESIAN_POINT('',(4.44,-1.,0.338402894381)); +#83734 = LINE('',#83735,#83736); +#83735 = CARTESIAN_POINT('',(4.47,-1.,0.338402894381)); +#83736 = VECTOR('',#83737,1.); +#83737 = DIRECTION('',(1.,-0.,-0.)); +#83738 = ORIENTED_EDGE('',*,*,#83739,.T.); +#83739 = EDGE_CURVE('',#83732,#83740,#83742,.T.); +#83740 = VERTEX_POINT('',#83741); +#83741 = CARTESIAN_POINT('',(4.44,-1.,1.25)); +#83742 = LINE('',#83743,#83744); +#83743 = CARTESIAN_POINT('',(4.44,-1.,-0.85)); +#83744 = VECTOR('',#83745,1.); +#83745 = DIRECTION('',(0.,-0.,1.)); +#83746 = ORIENTED_EDGE('',*,*,#83747,.T.); +#83747 = EDGE_CURVE('',#83740,#83748,#83750,.T.); +#83748 = VERTEX_POINT('',#83749); +#83749 = CARTESIAN_POINT('',(4.2,-1.,1.25)); +#83750 = LINE('',#83751,#83752); +#83751 = CARTESIAN_POINT('',(4.47,-1.,1.25)); +#83752 = VECTOR('',#83753,1.); +#83753 = DIRECTION('',(-1.,0.,0.)); +#83754 = ORIENTED_EDGE('',*,*,#83755,.T.); +#83755 = EDGE_CURVE('',#83748,#83730,#83756,.T.); +#83756 = LINE('',#83757,#83758); +#83757 = CARTESIAN_POINT('',(4.2,-1.,-0.85)); +#83758 = VECTOR('',#83759,1.); +#83759 = DIRECTION('',(-0.,0.,-1.)); +#83760 = PLANE('',#83761); +#83761 = AXIS2_PLACEMENT_3D('',#83762,#83763,#83764); +#83762 = CARTESIAN_POINT('',(4.47,-1.,-0.85)); +#83763 = DIRECTION('',(0.,1.,0.)); +#83764 = DIRECTION('',(0.,-0.,1.)); +#83765 = ADVANCED_FACE('',(#83766),#83800,.F.); +#83766 = FACE_BOUND('',#83767,.T.); +#83767 = EDGE_LOOP('',(#83768,#83778,#83786,#83794)); +#83768 = ORIENTED_EDGE('',*,*,#83769,.T.); +#83769 = EDGE_CURVE('',#83770,#83772,#83774,.T.); +#83770 = VERTEX_POINT('',#83771); +#83771 = CARTESIAN_POINT('',(4.2,-3.65,1.25)); +#83772 = VERTEX_POINT('',#83773); +#83773 = CARTESIAN_POINT('',(4.44,-3.65,1.25)); +#83774 = LINE('',#83775,#83776); +#83775 = CARTESIAN_POINT('',(4.47,-3.65,1.25)); +#83776 = VECTOR('',#83777,1.); +#83777 = DIRECTION('',(1.,1.445602896647E-15,0.)); +#83778 = ORIENTED_EDGE('',*,*,#83779,.T.); +#83779 = EDGE_CURVE('',#83772,#83780,#83782,.T.); +#83780 = VERTEX_POINT('',#83781); +#83781 = CARTESIAN_POINT('',(4.44,-3.65,-0.45)); +#83782 = LINE('',#83783,#83784); +#83783 = CARTESIAN_POINT('',(4.44,-3.65,-0.85)); +#83784 = VECTOR('',#83785,1.); +#83785 = DIRECTION('',(-0.,-0.,-1.)); +#83786 = ORIENTED_EDGE('',*,*,#83787,.T.); +#83787 = EDGE_CURVE('',#83780,#83788,#83790,.T.); +#83788 = VERTEX_POINT('',#83789); +#83789 = CARTESIAN_POINT('',(4.2,-3.65,-0.45)); +#83790 = LINE('',#83791,#83792); +#83791 = CARTESIAN_POINT('',(4.47,-3.65,-0.45)); +#83792 = VECTOR('',#83793,1.); +#83793 = DIRECTION('',(-1.,-1.445602896647E-15,-0.)); +#83794 = ORIENTED_EDGE('',*,*,#83795,.T.); +#83795 = EDGE_CURVE('',#83788,#83770,#83796,.T.); +#83796 = LINE('',#83797,#83798); +#83797 = CARTESIAN_POINT('',(4.2,-3.65,-0.85)); +#83798 = VECTOR('',#83799,1.); +#83799 = DIRECTION('',(-0.,0.,1.)); +#83800 = PLANE('',#83801); +#83801 = AXIS2_PLACEMENT_3D('',#83802,#83803,#83804); +#83802 = CARTESIAN_POINT('',(4.47,-3.65,-0.85)); +#83803 = DIRECTION('',(1.445602896647E-15,-1.,0.)); +#83804 = DIRECTION('',(1.,1.445602896647E-15,0.)); +#83805 = ADVANCED_FACE('',(#83806),#83840,.F.); +#83806 = FACE_BOUND('',#83807,.T.); +#83807 = EDGE_LOOP('',(#83808,#83818,#83826,#83834)); +#83808 = ORIENTED_EDGE('',*,*,#83809,.T.); +#83809 = EDGE_CURVE('',#83810,#83812,#83814,.T.); +#83810 = VERTEX_POINT('',#83811); +#83811 = CARTESIAN_POINT('',(4.2,-4.05,-0.85)); +#83812 = VERTEX_POINT('',#83813); +#83813 = CARTESIAN_POINT('',(4.44,-4.05,-0.85)); +#83814 = LINE('',#83815,#83816); +#83815 = CARTESIAN_POINT('',(5.854691731422E-15,-4.05,-0.85)); +#83816 = VECTOR('',#83817,1.); +#83817 = DIRECTION('',(1.,1.445602896647E-15,0.)); +#83818 = ORIENTED_EDGE('',*,*,#83819,.T.); +#83819 = EDGE_CURVE('',#83812,#83820,#83822,.T.); +#83820 = VERTEX_POINT('',#83821); +#83821 = CARTESIAN_POINT('',(4.44,-4.3,-0.85)); +#83822 = LINE('',#83823,#83824); +#83823 = CARTESIAN_POINT('',(4.44,0.,-0.85)); +#83824 = VECTOR('',#83825,1.); +#83825 = DIRECTION('',(0.,-1.,0.)); +#83826 = ORIENTED_EDGE('',*,*,#83827,.T.); +#83827 = EDGE_CURVE('',#83820,#83828,#83830,.T.); +#83828 = VERTEX_POINT('',#83829); +#83829 = CARTESIAN_POINT('',(4.2,-4.3,-0.85)); +#83830 = LINE('',#83831,#83832); +#83831 = CARTESIAN_POINT('',(0.,-4.3,-0.85)); +#83832 = VECTOR('',#83833,1.); +#83833 = DIRECTION('',(-1.,0.,0.)); +#83834 = ORIENTED_EDGE('',*,*,#83835,.T.); +#83835 = EDGE_CURVE('',#83828,#83810,#83836,.T.); +#83836 = LINE('',#83837,#83838); +#83837 = CARTESIAN_POINT('',(4.2,0.,-0.85)); +#83838 = VECTOR('',#83839,1.); +#83839 = DIRECTION('',(-0.,1.,0.)); +#83840 = PLANE('',#83841); +#83841 = AXIS2_PLACEMENT_3D('',#83842,#83843,#83844); +#83842 = CARTESIAN_POINT('',(0.,0.,-0.85)); +#83843 = DIRECTION('',(0.,-0.,1.)); +#83844 = DIRECTION('',(1.,0.,0.)); +#83845 = ADVANCED_FACE('',(#83846),#83880,.F.); +#83846 = FACE_BOUND('',#83847,.T.); +#83847 = EDGE_LOOP('',(#83848,#83858,#83866,#83874)); +#83848 = ORIENTED_EDGE('',*,*,#83849,.T.); +#83849 = EDGE_CURVE('',#83850,#83852,#83854,.T.); +#83850 = VERTEX_POINT('',#83851); +#83851 = CARTESIAN_POINT('',(-4.2,0.4,-0.45)); +#83852 = VERTEX_POINT('',#83853); +#83853 = CARTESIAN_POINT('',(-4.44,0.4,-0.45)); +#83854 = LINE('',#83855,#83856); +#83855 = CARTESIAN_POINT('',(-4.47,0.4,-0.45)); +#83856 = VECTOR('',#83857,1.); +#83857 = DIRECTION('',(-1.,-0.,-0.)); +#83858 = ORIENTED_EDGE('',*,*,#83859,.T.); +#83859 = EDGE_CURVE('',#83852,#83860,#83862,.T.); +#83860 = VERTEX_POINT('',#83861); +#83861 = CARTESIAN_POINT('',(-4.44,0.4,1.25)); +#83862 = LINE('',#83863,#83864); +#83863 = CARTESIAN_POINT('',(-4.44,0.4,-0.85)); +#83864 = VECTOR('',#83865,1.); +#83865 = DIRECTION('',(-0.,0.,1.)); +#83866 = ORIENTED_EDGE('',*,*,#83867,.T.); +#83867 = EDGE_CURVE('',#83860,#83868,#83870,.T.); +#83868 = VERTEX_POINT('',#83869); +#83869 = CARTESIAN_POINT('',(-4.2,0.4,1.25)); +#83870 = LINE('',#83871,#83872); +#83871 = CARTESIAN_POINT('',(-4.47,0.4,1.25)); +#83872 = VECTOR('',#83873,1.); +#83873 = DIRECTION('',(1.,0.,0.)); +#83874 = ORIENTED_EDGE('',*,*,#83875,.T.); +#83875 = EDGE_CURVE('',#83868,#83850,#83876,.T.); +#83876 = LINE('',#83877,#83878); +#83877 = CARTESIAN_POINT('',(-4.2,0.4,-0.85)); +#83878 = VECTOR('',#83879,1.); +#83879 = DIRECTION('',(-0.,-0.,-1.)); +#83880 = PLANE('',#83881); +#83881 = AXIS2_PLACEMENT_3D('',#83882,#83883,#83884); +#83882 = CARTESIAN_POINT('',(-4.47,0.4,-0.85)); +#83883 = DIRECTION('',(0.,-1.,0.)); +#83884 = DIRECTION('',(0.,-0.,-1.)); +#83885 = ADVANCED_FACE('',(#83886),#83920,.F.); +#83886 = FACE_BOUND('',#83887,.T.); +#83887 = EDGE_LOOP('',(#83888,#83898,#83906,#83914)); +#83888 = ORIENTED_EDGE('',*,*,#83889,.T.); +#83889 = EDGE_CURVE('',#83890,#83892,#83894,.T.); +#83890 = VERTEX_POINT('',#83891); +#83891 = CARTESIAN_POINT('',(-4.2,-1.,1.25)); +#83892 = VERTEX_POINT('',#83893); +#83893 = CARTESIAN_POINT('',(-4.44,-1.,1.25)); +#83894 = LINE('',#83895,#83896); +#83895 = CARTESIAN_POINT('',(-4.47,-1.,1.25)); +#83896 = VECTOR('',#83897,1.); +#83897 = DIRECTION('',(-1.,0.,0.)); +#83898 = ORIENTED_EDGE('',*,*,#83899,.T.); +#83899 = EDGE_CURVE('',#83892,#83900,#83902,.T.); +#83900 = VERTEX_POINT('',#83901); +#83901 = CARTESIAN_POINT('',(-4.44,-1.,0.338402894381)); +#83902 = LINE('',#83903,#83904); +#83903 = CARTESIAN_POINT('',(-4.44,-1.,-0.85)); +#83904 = VECTOR('',#83905,1.); +#83905 = DIRECTION('',(-0.,-0.,-1.)); +#83906 = ORIENTED_EDGE('',*,*,#83907,.T.); +#83907 = EDGE_CURVE('',#83900,#83908,#83910,.T.); +#83908 = VERTEX_POINT('',#83909); +#83909 = CARTESIAN_POINT('',(-4.2,-1.,0.338402894381)); +#83910 = LINE('',#83911,#83912); +#83911 = CARTESIAN_POINT('',(-4.17,-1.,0.338402894381)); +#83912 = VECTOR('',#83913,1.); +#83913 = DIRECTION('',(1.,-0.,-0.)); +#83914 = ORIENTED_EDGE('',*,*,#83915,.T.); +#83915 = EDGE_CURVE('',#83908,#83890,#83916,.T.); +#83916 = LINE('',#83917,#83918); +#83917 = CARTESIAN_POINT('',(-4.2,-1.,-0.85)); +#83918 = VECTOR('',#83919,1.); +#83919 = DIRECTION('',(0.,0.,1.)); +#83920 = PLANE('',#83921); +#83921 = AXIS2_PLACEMENT_3D('',#83922,#83923,#83924); +#83922 = CARTESIAN_POINT('',(-4.47,-1.,-0.85)); +#83923 = DIRECTION('',(-0.,1.,0.)); +#83924 = DIRECTION('',(0.,0.,1.)); +#83925 = ADVANCED_FACE('',(#83926),#83960,.F.); +#83926 = FACE_BOUND('',#83927,.T.); +#83927 = EDGE_LOOP('',(#83928,#83938,#83946,#83954)); +#83928 = ORIENTED_EDGE('',*,*,#83929,.T.); +#83929 = EDGE_CURVE('',#83930,#83932,#83934,.T.); +#83930 = VERTEX_POINT('',#83931); +#83931 = CARTESIAN_POINT('',(-4.2,-3.65,-0.45)); +#83932 = VERTEX_POINT('',#83933); +#83933 = CARTESIAN_POINT('',(-4.44,-3.65,-0.45)); +#83934 = LINE('',#83935,#83936); +#83935 = CARTESIAN_POINT('',(-4.47,-3.65,-0.45)); +#83936 = VECTOR('',#83937,1.); +#83937 = DIRECTION('',(-1.,2.891205793295E-15,-0.)); +#83938 = ORIENTED_EDGE('',*,*,#83939,.T.); +#83939 = EDGE_CURVE('',#83932,#83940,#83942,.T.); +#83940 = VERTEX_POINT('',#83941); +#83941 = CARTESIAN_POINT('',(-4.44,-3.65,1.25)); +#83942 = LINE('',#83943,#83944); +#83943 = CARTESIAN_POINT('',(-4.44,-3.65,-0.85)); +#83944 = VECTOR('',#83945,1.); +#83945 = DIRECTION('',(0.,0.,1.)); +#83946 = ORIENTED_EDGE('',*,*,#83947,.T.); +#83947 = EDGE_CURVE('',#83940,#83948,#83950,.T.); +#83948 = VERTEX_POINT('',#83949); +#83949 = CARTESIAN_POINT('',(-4.2,-3.65,1.25)); +#83950 = LINE('',#83951,#83952); +#83951 = CARTESIAN_POINT('',(-4.47,-3.65,1.25)); +#83952 = VECTOR('',#83953,1.); +#83953 = DIRECTION('',(1.,-2.891205793295E-15,0.)); +#83954 = ORIENTED_EDGE('',*,*,#83955,.T.); +#83955 = EDGE_CURVE('',#83948,#83930,#83956,.T.); +#83956 = LINE('',#83957,#83958); +#83957 = CARTESIAN_POINT('',(-4.2,-3.65,-0.85)); +#83958 = VECTOR('',#83959,1.); +#83959 = DIRECTION('',(-0.,-0.,-1.)); +#83960 = PLANE('',#83961); +#83961 = AXIS2_PLACEMENT_3D('',#83962,#83963,#83964); +#83962 = CARTESIAN_POINT('',(-4.47,-3.65,-0.85)); +#83963 = DIRECTION('',(-2.891205793295E-15,-1.,0.)); +#83964 = DIRECTION('',(1.,-2.891205793295E-15,0.)); +#83965 = ADVANCED_FACE('',(#83966),#84000,.F.); +#83966 = FACE_BOUND('',#83967,.T.); +#83967 = EDGE_LOOP('',(#83968,#83978,#83986,#83994)); +#83968 = ORIENTED_EDGE('',*,*,#83969,.T.); +#83969 = EDGE_CURVE('',#83970,#83972,#83974,.T.); +#83970 = VERTEX_POINT('',#83971); +#83971 = CARTESIAN_POINT('',(-4.2,-4.3,-0.85)); +#83972 = VERTEX_POINT('',#83973); +#83973 = CARTESIAN_POINT('',(-4.44,-4.3,-0.85)); +#83974 = LINE('',#83975,#83976); +#83975 = CARTESIAN_POINT('',(0.,-4.3,-0.85)); +#83976 = VECTOR('',#83977,1.); +#83977 = DIRECTION('',(-1.,0.,0.)); +#83978 = ORIENTED_EDGE('',*,*,#83979,.T.); +#83979 = EDGE_CURVE('',#83972,#83980,#83982,.T.); +#83980 = VERTEX_POINT('',#83981); +#83981 = CARTESIAN_POINT('',(-4.44,-4.05,-0.85)); +#83982 = LINE('',#83983,#83984); +#83983 = CARTESIAN_POINT('',(-4.44,0.,-0.85)); +#83984 = VECTOR('',#83985,1.); +#83985 = DIRECTION('',(0.,1.,0.)); +#83986 = ORIENTED_EDGE('',*,*,#83987,.T.); +#83987 = EDGE_CURVE('',#83980,#83988,#83990,.T.); +#83988 = VERTEX_POINT('',#83989); +#83989 = CARTESIAN_POINT('',(-4.2,-4.05,-0.85)); +#83990 = LINE('',#83991,#83992); +#83991 = CARTESIAN_POINT('',(-1.170938346284E-14,-4.05,-0.85)); +#83992 = VECTOR('',#83993,1.); +#83993 = DIRECTION('',(1.,-2.891205793295E-15,0.)); +#83994 = ORIENTED_EDGE('',*,*,#83995,.T.); +#83995 = EDGE_CURVE('',#83988,#83970,#83996,.T.); +#83996 = LINE('',#83997,#83998); +#83997 = CARTESIAN_POINT('',(-4.2,0.,-0.85)); +#83998 = VECTOR('',#83999,1.); +#83999 = DIRECTION('',(0.,-1.,0.)); +#84000 = PLANE('',#84001); +#84001 = AXIS2_PLACEMENT_3D('',#84002,#84003,#84004); +#84002 = CARTESIAN_POINT('',(0.,0.,-0.85)); +#84003 = DIRECTION('',(0.,0.,1.)); +#84004 = DIRECTION('',(1.,0.,-0.)); +#84005 = ADVANCED_FACE('',(#84006),#84040,.F.); +#84006 = FACE_BOUND('',#84007,.T.); +#84007 = EDGE_LOOP('',(#84008,#84018,#84026,#84034)); +#84008 = ORIENTED_EDGE('',*,*,#84009,.T.); +#84009 = EDGE_CURVE('',#84010,#84012,#84014,.T.); +#84010 = VERTEX_POINT('',#84011); +#84011 = CARTESIAN_POINT('',(-4.2,-0.4,-2.002075382097E-02)); +#84012 = VERTEX_POINT('',#84013); +#84013 = CARTESIAN_POINT('',(-4.44,-0.4,-2.002075382097E-02)); +#84014 = LINE('',#84015,#84016); +#84015 = CARTESIAN_POINT('',(-4.47,-0.4,-2.002075382097E-02)); +#84016 = VECTOR('',#84017,1.); +#84017 = DIRECTION('',(-1.,0.,0.)); +#84018 = ORIENTED_EDGE('',*,*,#84019,.T.); +#84019 = EDGE_CURVE('',#84012,#84020,#84022,.T.); +#84020 = VERTEX_POINT('',#84021); +#84021 = CARTESIAN_POINT('',(-4.44,-0.4,-0.45)); +#84022 = LINE('',#84023,#84024); +#84023 = CARTESIAN_POINT('',(-4.44,-0.4,-0.85)); +#84024 = VECTOR('',#84025,1.); +#84025 = DIRECTION('',(-0.,1.807003620809E-16,-1.)); +#84026 = ORIENTED_EDGE('',*,*,#84027,.T.); +#84027 = EDGE_CURVE('',#84020,#84028,#84030,.T.); +#84028 = VERTEX_POINT('',#84029); +#84029 = CARTESIAN_POINT('',(-4.2,-0.4,-0.45)); +#84030 = LINE('',#84031,#84032); +#84031 = CARTESIAN_POINT('',(-4.47,-0.4,-0.45)); +#84032 = VECTOR('',#84033,1.); +#84033 = DIRECTION('',(1.,0.,0.)); +#84034 = ORIENTED_EDGE('',*,*,#84035,.T.); +#84035 = EDGE_CURVE('',#84028,#84010,#84036,.T.); +#84036 = LINE('',#84037,#84038); +#84037 = CARTESIAN_POINT('',(-4.2,-0.4,-0.85)); +#84038 = VECTOR('',#84039,1.); +#84039 = DIRECTION('',(-0.,-1.807003620809E-16,1.)); +#84040 = PLANE('',#84041); +#84041 = AXIS2_PLACEMENT_3D('',#84042,#84043,#84044); +#84042 = CARTESIAN_POINT('',(-4.47,-0.4,-0.85)); +#84043 = DIRECTION('',(0.,1.,1.807003620809E-16)); +#84044 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#84045 = ADVANCED_FACE('',(#84046),#84080,.F.); +#84046 = FACE_BOUND('',#84047,.T.); +#84047 = EDGE_LOOP('',(#84048,#84058,#84066,#84074)); +#84048 = ORIENTED_EDGE('',*,*,#84049,.T.); +#84049 = EDGE_CURVE('',#84050,#84052,#84054,.T.); +#84050 = VERTEX_POINT('',#84051); +#84051 = CARTESIAN_POINT('',(4.2,-0.4,-0.45)); +#84052 = VERTEX_POINT('',#84053); +#84053 = CARTESIAN_POINT('',(4.44,-0.4,-0.45)); +#84054 = LINE('',#84055,#84056); +#84055 = CARTESIAN_POINT('',(4.47,-0.4,-0.45)); +#84056 = VECTOR('',#84057,1.); +#84057 = DIRECTION('',(1.,-0.,0.)); +#84058 = ORIENTED_EDGE('',*,*,#84059,.T.); +#84059 = EDGE_CURVE('',#84052,#84060,#84062,.T.); +#84060 = VERTEX_POINT('',#84061); +#84061 = CARTESIAN_POINT('',(4.44,-0.4,-2.002075382097E-02)); +#84062 = LINE('',#84063,#84064); +#84063 = CARTESIAN_POINT('',(4.44,-0.4,-0.85)); +#84064 = VECTOR('',#84065,1.); +#84065 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#84066 = ORIENTED_EDGE('',*,*,#84067,.T.); +#84067 = EDGE_CURVE('',#84060,#84068,#84070,.T.); +#84068 = VERTEX_POINT('',#84069); +#84069 = CARTESIAN_POINT('',(4.2,-0.4,-2.002075382097E-02)); +#84070 = LINE('',#84071,#84072); +#84071 = CARTESIAN_POINT('',(-4.47,-0.4,-2.002075382097E-02)); +#84072 = VECTOR('',#84073,1.); +#84073 = DIRECTION('',(-1.,0.,0.)); +#84074 = ORIENTED_EDGE('',*,*,#84075,.T.); +#84075 = EDGE_CURVE('',#84068,#84050,#84076,.T.); +#84076 = LINE('',#84077,#84078); +#84077 = CARTESIAN_POINT('',(4.2,-0.4,-0.85)); +#84078 = VECTOR('',#84079,1.); +#84079 = DIRECTION('',(-0.,1.807003620809E-16,-1.)); +#84080 = PLANE('',#84081); +#84081 = AXIS2_PLACEMENT_3D('',#84082,#84083,#84084); +#84082 = CARTESIAN_POINT('',(-4.47,-0.4,-0.85)); +#84083 = DIRECTION('',(0.,1.,1.807003620809E-16)); +#84084 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#84085 = ADVANCED_FACE('',(#84086),#84113,.T.); +#84086 = FACE_BOUND('',#84087,.T.); +#84087 = EDGE_LOOP('',(#84088,#84098,#84105,#84106)); +#84088 = ORIENTED_EDGE('',*,*,#84089,.F.); +#84089 = EDGE_CURVE('',#84090,#84092,#84094,.T.); +#84090 = VERTEX_POINT('',#84091); +#84091 = CARTESIAN_POINT('',(-4.44,0.,-0.85)); +#84092 = VERTEX_POINT('',#84093); +#84093 = CARTESIAN_POINT('',(-4.2,0.,-0.85)); +#84094 = LINE('',#84095,#84096); +#84095 = CARTESIAN_POINT('',(0.,0.,-0.85)); +#84096 = VECTOR('',#84097,1.); +#84097 = DIRECTION('',(1.,0.,0.)); +#84098 = ORIENTED_EDGE('',*,*,#84099,.T.); +#84099 = EDGE_CURVE('',#84090,#83852,#84100,.T.); +#84100 = CIRCLE('',#84101,0.4); +#84101 = AXIS2_PLACEMENT_3D('',#84102,#84103,#84104); +#84102 = CARTESIAN_POINT('',(-4.44,0.,-0.45)); +#84103 = DIRECTION('',(1.,0.,0.)); +#84104 = DIRECTION('',(0.,0.,-1.)); +#84105 = ORIENTED_EDGE('',*,*,#83849,.F.); +#84106 = ORIENTED_EDGE('',*,*,#84107,.T.); +#84107 = EDGE_CURVE('',#83850,#84092,#84108,.T.); +#84108 = CIRCLE('',#84109,0.4); +#84109 = AXIS2_PLACEMENT_3D('',#84110,#84111,#84112); +#84110 = CARTESIAN_POINT('',(-4.2,0.,-0.45)); +#84111 = DIRECTION('',(-1.,0.,0.)); +#84112 = DIRECTION('',(0.,0.,1.)); +#84113 = CYLINDRICAL_SURFACE('',#84114,0.4); +#84114 = AXIS2_PLACEMENT_3D('',#84115,#84116,#84117); +#84115 = CARTESIAN_POINT('',(0.,0.,-0.45)); +#84116 = DIRECTION('',(1.,0.,0.)); +#84117 = DIRECTION('',(0.,0.,-1.)); +#84118 = ADVANCED_FACE('',(#84119),#84137,.T.); +#84119 = FACE_BOUND('',#84120,.T.); +#84120 = EDGE_LOOP('',(#84121,#84122,#84129,#84130)); +#84121 = ORIENTED_EDGE('',*,*,#84027,.F.); +#84122 = ORIENTED_EDGE('',*,*,#84123,.T.); +#84123 = EDGE_CURVE('',#84020,#84090,#84124,.T.); +#84124 = CIRCLE('',#84125,0.4); +#84125 = AXIS2_PLACEMENT_3D('',#84126,#84127,#84128); +#84126 = CARTESIAN_POINT('',(-4.44,-1.807003620809E-17,-0.45)); +#84127 = DIRECTION('',(1.,0.,0.)); +#84128 = DIRECTION('',(0.,0.,-1.)); +#84129 = ORIENTED_EDGE('',*,*,#84089,.T.); +#84130 = ORIENTED_EDGE('',*,*,#84131,.T.); +#84131 = EDGE_CURVE('',#84092,#84028,#84132,.T.); +#84132 = CIRCLE('',#84133,0.4); +#84133 = AXIS2_PLACEMENT_3D('',#84134,#84135,#84136); +#84134 = CARTESIAN_POINT('',(-4.2,-1.807003620809E-17,-0.45)); +#84135 = DIRECTION('',(-1.,0.,0.)); +#84136 = DIRECTION('',(0.,0.,1.)); +#84137 = CYLINDRICAL_SURFACE('',#84138,0.4); +#84138 = AXIS2_PLACEMENT_3D('',#84139,#84140,#84141); +#84139 = CARTESIAN_POINT('',(-4.47,-1.807003620809E-17,-0.45)); +#84140 = DIRECTION('',(1.,-0.,0.)); +#84141 = DIRECTION('',(0.,0.,-1.)); +#84142 = ADVANCED_FACE('',(#84143),#84170,.T.); +#84143 = FACE_BOUND('',#84144,.T.); +#84144 = EDGE_LOOP('',(#84145,#84146,#84155,#84163)); +#84145 = ORIENTED_EDGE('',*,*,#83707,.F.); +#84146 = ORIENTED_EDGE('',*,*,#84147,.T.); +#84147 = EDGE_CURVE('',#83700,#84148,#84150,.T.); +#84148 = VERTEX_POINT('',#84149); +#84149 = CARTESIAN_POINT('',(4.44,0.,-0.85)); +#84150 = CIRCLE('',#84151,0.4); +#84151 = AXIS2_PLACEMENT_3D('',#84152,#84153,#84154); +#84152 = CARTESIAN_POINT('',(4.44,0.,-0.45)); +#84153 = DIRECTION('',(-1.,0.,0.)); +#84154 = DIRECTION('',(0.,0.,1.)); +#84155 = ORIENTED_EDGE('',*,*,#84156,.F.); +#84156 = EDGE_CURVE('',#84157,#84148,#84159,.T.); +#84157 = VERTEX_POINT('',#84158); +#84158 = CARTESIAN_POINT('',(4.2,0.,-0.85)); +#84159 = LINE('',#84160,#84161); +#84160 = CARTESIAN_POINT('',(4.47,0.,-0.85)); +#84161 = VECTOR('',#84162,1.); +#84162 = DIRECTION('',(1.,0.,0.)); +#84163 = ORIENTED_EDGE('',*,*,#84164,.T.); +#84164 = EDGE_CURVE('',#84157,#83708,#84165,.T.); +#84165 = CIRCLE('',#84166,0.4); +#84166 = AXIS2_PLACEMENT_3D('',#84167,#84168,#84169); +#84167 = CARTESIAN_POINT('',(4.2,0.,-0.45)); +#84168 = DIRECTION('',(1.,0.,0.)); +#84169 = DIRECTION('',(0.,0.,-1.)); +#84170 = CYLINDRICAL_SURFACE('',#84171,0.4); +#84171 = AXIS2_PLACEMENT_3D('',#84172,#84173,#84174); +#84172 = CARTESIAN_POINT('',(0.,0.,-0.45)); +#84173 = DIRECTION('',(-1.,0.,0.)); +#84174 = DIRECTION('',(0.,0.,1.)); +#84175 = ADVANCED_FACE('',(#84176),#84194,.T.); +#84176 = FACE_BOUND('',#84177,.T.); +#84177 = EDGE_LOOP('',(#84178,#84179,#84186,#84187)); +#84178 = ORIENTED_EDGE('',*,*,#84156,.T.); +#84179 = ORIENTED_EDGE('',*,*,#84180,.T.); +#84180 = EDGE_CURVE('',#84148,#84052,#84181,.T.); +#84181 = CIRCLE('',#84182,0.4); +#84182 = AXIS2_PLACEMENT_3D('',#84183,#84184,#84185); +#84183 = CARTESIAN_POINT('',(4.44,-1.807003620809E-17,-0.45)); +#84184 = DIRECTION('',(-1.,0.,0.)); +#84185 = DIRECTION('',(0.,0.,1.)); +#84186 = ORIENTED_EDGE('',*,*,#84049,.F.); +#84187 = ORIENTED_EDGE('',*,*,#84188,.T.); +#84188 = EDGE_CURVE('',#84050,#84157,#84189,.T.); +#84189 = CIRCLE('',#84190,0.4); +#84190 = AXIS2_PLACEMENT_3D('',#84191,#84192,#84193); +#84191 = CARTESIAN_POINT('',(4.2,-1.807003620809E-17,-0.45)); +#84192 = DIRECTION('',(1.,0.,0.)); +#84193 = DIRECTION('',(0.,0.,-1.)); +#84194 = CYLINDRICAL_SURFACE('',#84195,0.4); +#84195 = AXIS2_PLACEMENT_3D('',#84196,#84197,#84198); +#84196 = CARTESIAN_POINT('',(-4.47,-1.807003620809E-17,-0.45)); +#84197 = DIRECTION('',(-1.,0.,0.)); +#84198 = DIRECTION('',(0.,0.,1.)); +#84199 = ADVANCED_FACE('',(#84200),#84218,.T.); +#84200 = FACE_BOUND('',#84201,.T.); +#84201 = EDGE_LOOP('',(#84202,#84203,#84210,#84211)); +#84202 = ORIENTED_EDGE('',*,*,#83827,.F.); +#84203 = ORIENTED_EDGE('',*,*,#84204,.T.); +#84204 = EDGE_CURVE('',#83820,#82013,#84205,.T.); +#84205 = CIRCLE('',#84206,0.4); +#84206 = AXIS2_PLACEMENT_3D('',#84207,#84208,#84209); +#84207 = CARTESIAN_POINT('',(4.44,-4.3,-0.45)); +#84208 = DIRECTION('',(-1.,0.,0.)); +#84209 = DIRECTION('',(0.,0.,1.)); +#84210 = ORIENTED_EDGE('',*,*,#82010,.F.); +#84211 = ORIENTED_EDGE('',*,*,#84212,.T.); +#84212 = EDGE_CURVE('',#82011,#83828,#84213,.T.); +#84213 = CIRCLE('',#84214,0.4); +#84214 = AXIS2_PLACEMENT_3D('',#84215,#84216,#84217); +#84215 = CARTESIAN_POINT('',(4.2,-4.3,-0.45)); +#84216 = DIRECTION('',(1.,0.,0.)); +#84217 = DIRECTION('',(0.,0.,-1.)); +#84218 = CYLINDRICAL_SURFACE('',#84219,0.4); +#84219 = AXIS2_PLACEMENT_3D('',#84220,#84221,#84222); +#84220 = CARTESIAN_POINT('',(0.,-4.3,-0.45)); +#84221 = DIRECTION('',(-1.,0.,0.)); +#84222 = DIRECTION('',(0.,0.,1.)); +#84223 = ADVANCED_FACE('',(#84224),#84242,.T.); +#84224 = FACE_BOUND('',#84225,.T.); +#84225 = EDGE_LOOP('',(#84226,#84227,#84234,#84235)); +#84226 = ORIENTED_EDGE('',*,*,#83787,.F.); +#84227 = ORIENTED_EDGE('',*,*,#84228,.T.); +#84228 = EDGE_CURVE('',#83780,#83812,#84229,.T.); +#84229 = CIRCLE('',#84230,0.4); +#84230 = AXIS2_PLACEMENT_3D('',#84231,#84232,#84233); +#84231 = CARTESIAN_POINT('',(4.44,-4.05,-0.45)); +#84232 = DIRECTION('',(-1.,0.,0.)); +#84233 = DIRECTION('',(0.,0.,1.)); +#84234 = ORIENTED_EDGE('',*,*,#83809,.F.); +#84235 = ORIENTED_EDGE('',*,*,#84236,.T.); +#84236 = EDGE_CURVE('',#83810,#83788,#84237,.T.); +#84237 = CIRCLE('',#84238,0.4); +#84238 = AXIS2_PLACEMENT_3D('',#84239,#84240,#84241); +#84239 = CARTESIAN_POINT('',(4.2,-4.05,-0.45)); +#84240 = DIRECTION('',(1.,0.,0.)); +#84241 = DIRECTION('',(0.,0.,-1.)); +#84242 = CYLINDRICAL_SURFACE('',#84243,0.4); +#84243 = AXIS2_PLACEMENT_3D('',#84244,#84245,#84246); +#84244 = CARTESIAN_POINT('',(5.854691731422E-15,-4.05,-0.45)); +#84245 = DIRECTION('',(1.,1.445602896647E-15,0.)); +#84246 = DIRECTION('',(-1.445602896647E-15,1.,0.)); +#84247 = ADVANCED_FACE('',(#84248),#84266,.T.); +#84248 = FACE_BOUND('',#84249,.T.); +#84249 = EDGE_LOOP('',(#84250,#84251,#84258,#84259)); +#84250 = ORIENTED_EDGE('',*,*,#81834,.F.); +#84251 = ORIENTED_EDGE('',*,*,#84252,.T.); +#84252 = EDGE_CURVE('',#81827,#83972,#84253,.T.); +#84253 = CIRCLE('',#84254,0.4); +#84254 = AXIS2_PLACEMENT_3D('',#84255,#84256,#84257); +#84255 = CARTESIAN_POINT('',(-4.44,-4.3,-0.45)); +#84256 = DIRECTION('',(1.,0.,0.)); +#84257 = DIRECTION('',(0.,0.,-1.)); +#84258 = ORIENTED_EDGE('',*,*,#83969,.F.); +#84259 = ORIENTED_EDGE('',*,*,#84260,.T.); +#84260 = EDGE_CURVE('',#83970,#81835,#84261,.T.); +#84261 = CIRCLE('',#84262,0.4); +#84262 = AXIS2_PLACEMENT_3D('',#84263,#84264,#84265); +#84263 = CARTESIAN_POINT('',(-4.2,-4.3,-0.45)); +#84264 = DIRECTION('',(-1.,0.,0.)); +#84265 = DIRECTION('',(0.,0.,1.)); +#84266 = CYLINDRICAL_SURFACE('',#84267,0.4); +#84267 = AXIS2_PLACEMENT_3D('',#84268,#84269,#84270); +#84268 = CARTESIAN_POINT('',(0.,-4.3,-0.45)); +#84269 = DIRECTION('',(-1.,0.,0.)); +#84270 = DIRECTION('',(0.,0.,1.)); +#84271 = ADVANCED_FACE('',(#84272),#84290,.T.); +#84272 = FACE_BOUND('',#84273,.T.); +#84273 = EDGE_LOOP('',(#84274,#84275,#84282,#84283)); +#84274 = ORIENTED_EDGE('',*,*,#83987,.F.); +#84275 = ORIENTED_EDGE('',*,*,#84276,.T.); +#84276 = EDGE_CURVE('',#83980,#83932,#84277,.T.); +#84277 = CIRCLE('',#84278,0.4); +#84278 = AXIS2_PLACEMENT_3D('',#84279,#84280,#84281); +#84279 = CARTESIAN_POINT('',(-4.44,-4.05,-0.45)); +#84280 = DIRECTION('',(1.,0.,0.)); +#84281 = DIRECTION('',(0.,0.,-1.)); +#84282 = ORIENTED_EDGE('',*,*,#83929,.F.); +#84283 = ORIENTED_EDGE('',*,*,#84284,.T.); +#84284 = EDGE_CURVE('',#83930,#83988,#84285,.T.); +#84285 = CIRCLE('',#84286,0.4); +#84286 = AXIS2_PLACEMENT_3D('',#84287,#84288,#84289); +#84287 = CARTESIAN_POINT('',(-4.2,-4.05,-0.45)); +#84288 = DIRECTION('',(-1.,0.,0.)); +#84289 = DIRECTION('',(0.,0.,1.)); +#84290 = CYLINDRICAL_SURFACE('',#84291,0.4); +#84291 = AXIS2_PLACEMENT_3D('',#84292,#84293,#84294); +#84292 = CARTESIAN_POINT('',(-1.170938346284E-14,-4.05,-0.45)); +#84293 = DIRECTION('',(1.,-2.891205793295E-15,0.)); +#84294 = DIRECTION('',(2.891205793295E-15,1.,0.)); +#84295 = ADVANCED_FACE('',(#84296),#84330,.F.); +#84296 = FACE_BOUND('',#84297,.T.); +#84297 = EDGE_LOOP('',(#84298,#84308,#84316,#84324)); +#84298 = ORIENTED_EDGE('',*,*,#84299,.T.); +#84299 = EDGE_CURVE('',#84300,#84302,#84304,.T.); +#84300 = VERTEX_POINT('',#84301); +#84301 = CARTESIAN_POINT('',(-4.2,-0.934202014333,0.244433632302)); +#84302 = VERTEX_POINT('',#84303); +#84303 = CARTESIAN_POINT('',(-4.44,-0.934202014333,0.244433632302)); +#84304 = LINE('',#84305,#84306); +#84305 = CARTESIAN_POINT('',(-4.47,-0.934202014333,0.244433632302)); +#84306 = VECTOR('',#84307,1.); +#84307 = DIRECTION('',(-1.,-0.,-0.)); +#84308 = ORIENTED_EDGE('',*,*,#84309,.T.); +#84309 = EDGE_CURVE('',#84302,#84310,#84312,.T.); +#84310 = VERTEX_POINT('',#84311); +#84311 = CARTESIAN_POINT('',(-4.44,-0.465797985667,7.394850825762E-02)); +#84312 = LINE('',#84313,#84314); +#84313 = CARTESIAN_POINT('',(-4.44,-0.465797985667,7.394850825762E-02)); +#84314 = VECTOR('',#84315,1.); +#84315 = DIRECTION('',(-0.,0.939692620786,-0.342020143326)); +#84316 = ORIENTED_EDGE('',*,*,#84317,.T.); +#84317 = EDGE_CURVE('',#84310,#84318,#84320,.T.); +#84318 = VERTEX_POINT('',#84319); +#84319 = CARTESIAN_POINT('',(-4.2,-0.465797985667,7.394850825762E-02)); +#84320 = LINE('',#84321,#84322); +#84321 = CARTESIAN_POINT('',(-4.47,-0.465797985667,7.394850825762E-02)); +#84322 = VECTOR('',#84323,1.); +#84323 = DIRECTION('',(1.,0.,0.)); +#84324 = ORIENTED_EDGE('',*,*,#84325,.T.); +#84325 = EDGE_CURVE('',#84318,#84300,#84326,.T.); +#84326 = LINE('',#84327,#84328); +#84327 = CARTESIAN_POINT('',(-4.2,-0.934202014333,0.244433632302)); +#84328 = VECTOR('',#84329,1.); +#84329 = DIRECTION('',(-0.,-0.939692620786,0.342020143326)); +#84330 = PLANE('',#84331); +#84331 = AXIS2_PLACEMENT_3D('',#84332,#84333,#84334); +#84332 = CARTESIAN_POINT('',(-4.47,-1.,0.26838214056)); +#84333 = DIRECTION('',(-0.,0.342020143326,0.939692620786)); +#84334 = DIRECTION('',(1.,0.,0.)); +#84335 = ADVANCED_FACE('',(#84336),#84370,.F.); +#84336 = FACE_BOUND('',#84337,.T.); +#84337 = EDGE_LOOP('',(#84338,#84348,#84356,#84364)); +#84338 = ORIENTED_EDGE('',*,*,#84339,.T.); +#84339 = EDGE_CURVE('',#84340,#84342,#84344,.T.); +#84340 = VERTEX_POINT('',#84341); +#84341 = CARTESIAN_POINT('',(4.2,-0.465797985667,7.394850825762E-02)); +#84342 = VERTEX_POINT('',#84343); +#84343 = CARTESIAN_POINT('',(4.44,-0.465797985667,7.394850825762E-02)); +#84344 = LINE('',#84345,#84346); +#84345 = CARTESIAN_POINT('',(4.47,-0.465797985667,7.394850825762E-02)); +#84346 = VECTOR('',#84347,1.); +#84347 = DIRECTION('',(1.,0.,-0.)); +#84348 = ORIENTED_EDGE('',*,*,#84349,.T.); +#84349 = EDGE_CURVE('',#84342,#84350,#84352,.T.); +#84350 = VERTEX_POINT('',#84351); +#84351 = CARTESIAN_POINT('',(4.44,-0.934202014333,0.244433632302)); +#84352 = LINE('',#84353,#84354); +#84353 = CARTESIAN_POINT('',(4.44,-0.934202014333,0.244433632302)); +#84354 = VECTOR('',#84355,1.); +#84355 = DIRECTION('',(-0.,-0.939692620786,0.342020143326)); +#84356 = ORIENTED_EDGE('',*,*,#84357,.T.); +#84357 = EDGE_CURVE('',#84350,#84358,#84360,.T.); +#84358 = VERTEX_POINT('',#84359); +#84359 = CARTESIAN_POINT('',(4.2,-0.934202014333,0.244433632302)); +#84360 = LINE('',#84361,#84362); +#84361 = CARTESIAN_POINT('',(4.17,-0.934202014333,0.244433632302)); +#84362 = VECTOR('',#84363,1.); +#84363 = DIRECTION('',(-1.,0.,-0.)); +#84364 = ORIENTED_EDGE('',*,*,#84365,.T.); +#84365 = EDGE_CURVE('',#84358,#84340,#84366,.T.); +#84366 = LINE('',#84367,#84368); +#84367 = CARTESIAN_POINT('',(4.2,-0.465797985667,7.394850825762E-02)); +#84368 = VECTOR('',#84369,1.); +#84369 = DIRECTION('',(-0.,0.939692620786,-0.342020143326)); +#84370 = PLANE('',#84371); +#84371 = AXIS2_PLACEMENT_3D('',#84372,#84373,#84374); +#84372 = CARTESIAN_POINT('',(4.47,-1.,0.26838214056)); +#84373 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#84374 = DIRECTION('',(1.,0.,-0.)); +#84375 = ADVANCED_FACE('',(#84376),#84394,.T.); +#84376 = FACE_BOUND('',#84377,.T.); +#84377 = EDGE_LOOP('',(#84378,#84379,#84386,#84387)); +#84378 = ORIENTED_EDGE('',*,*,#83907,.F.); +#84379 = ORIENTED_EDGE('',*,*,#84380,.T.); +#84380 = EDGE_CURVE('',#83900,#84302,#84381,.T.); +#84381 = CIRCLE('',#84382,1.E-01); +#84382 = AXIS2_PLACEMENT_3D('',#84383,#84384,#84385); +#84383 = CARTESIAN_POINT('',(-4.44,-0.9,0.338402894381)); +#84384 = DIRECTION('',(1.,0.,0.)); +#84385 = DIRECTION('',(0.,0.,-1.)); +#84386 = ORIENTED_EDGE('',*,*,#84299,.F.); +#84387 = ORIENTED_EDGE('',*,*,#84388,.T.); +#84388 = EDGE_CURVE('',#84300,#83908,#84389,.T.); +#84389 = CIRCLE('',#84390,1.E-01); +#84390 = AXIS2_PLACEMENT_3D('',#84391,#84392,#84393); +#84391 = CARTESIAN_POINT('',(-4.2,-0.9,0.338402894381)); +#84392 = DIRECTION('',(-1.,0.,0.)); +#84393 = DIRECTION('',(0.,0.,1.)); +#84394 = CYLINDRICAL_SURFACE('',#84395,1.E-01); +#84395 = AXIS2_PLACEMENT_3D('',#84396,#84397,#84398); +#84396 = CARTESIAN_POINT('',(-4.47,-0.9,0.338402894381)); +#84397 = DIRECTION('',(1.,0.,0.)); +#84398 = DIRECTION('',(0.,0.,-1.)); +#84399 = ADVANCED_FACE('',(#84400),#84418,.F.); +#84400 = FACE_BOUND('',#84401,.F.); +#84401 = EDGE_LOOP('',(#84402,#84409,#84410,#84417)); +#84402 = ORIENTED_EDGE('',*,*,#84403,.F.); +#84403 = EDGE_CURVE('',#84010,#84318,#84404,.T.); +#84404 = CIRCLE('',#84405,0.1); +#84405 = AXIS2_PLACEMENT_3D('',#84406,#84407,#84408); +#84406 = CARTESIAN_POINT('',(-4.2,-0.5,-2.002075382097E-02)); +#84407 = DIRECTION('',(1.,0.,-0.)); +#84408 = DIRECTION('',(0.,-1.084202172486E-15,1.)); +#84409 = ORIENTED_EDGE('',*,*,#84009,.T.); +#84410 = ORIENTED_EDGE('',*,*,#84411,.F.); +#84411 = EDGE_CURVE('',#84310,#84012,#84412,.T.); +#84412 = CIRCLE('',#84413,0.1); +#84413 = AXIS2_PLACEMENT_3D('',#84414,#84415,#84416); +#84414 = CARTESIAN_POINT('',(-4.44,-0.5,-2.002075382097E-02)); +#84415 = DIRECTION('',(-1.,-0.,0.)); +#84416 = DIRECTION('',(0.,-1.084202172486E-15,-1.)); +#84417 = ORIENTED_EDGE('',*,*,#84317,.T.); +#84418 = CYLINDRICAL_SURFACE('',#84419,0.1); +#84419 = AXIS2_PLACEMENT_3D('',#84420,#84421,#84422); +#84420 = CARTESIAN_POINT('',(-4.47,-0.5,-2.002075382097E-02)); +#84421 = DIRECTION('',(-1.,0.,-0.)); +#84422 = DIRECTION('',(0.,0.,1.)); +#84423 = ADVANCED_FACE('',(#84424),#84442,.F.); +#84424 = FACE_BOUND('',#84425,.F.); +#84425 = EDGE_LOOP('',(#84426,#84433,#84434,#84441)); +#84426 = ORIENTED_EDGE('',*,*,#84427,.F.); +#84427 = EDGE_CURVE('',#84340,#84068,#84428,.T.); +#84428 = CIRCLE('',#84429,0.1); +#84429 = AXIS2_PLACEMENT_3D('',#84430,#84431,#84432); +#84430 = CARTESIAN_POINT('',(4.2,-0.5,-2.002075382097E-02)); +#84431 = DIRECTION('',(-1.,-0.,-0.)); +#84432 = DIRECTION('',(0.,0.,-1.)); +#84433 = ORIENTED_EDGE('',*,*,#84339,.T.); +#84434 = ORIENTED_EDGE('',*,*,#84435,.F.); +#84435 = EDGE_CURVE('',#84060,#84342,#84436,.T.); +#84436 = CIRCLE('',#84437,0.1); +#84437 = AXIS2_PLACEMENT_3D('',#84438,#84439,#84440); +#84438 = CARTESIAN_POINT('',(4.44,-0.5,-2.002075382097E-02)); +#84439 = DIRECTION('',(1.,0.,-0.)); +#84440 = DIRECTION('',(0.,-2.168404344971E-15,1.)); +#84441 = ORIENTED_EDGE('',*,*,#84067,.T.); +#84442 = CYLINDRICAL_SURFACE('',#84443,0.1); +#84443 = AXIS2_PLACEMENT_3D('',#84444,#84445,#84446); +#84444 = CARTESIAN_POINT('',(4.47,-0.5,-2.002075382097E-02)); +#84445 = DIRECTION('',(-1.,0.,0.)); +#84446 = DIRECTION('',(0.,0.,1.)); +#84447 = ADVANCED_FACE('',(#84448),#84466,.T.); +#84448 = FACE_BOUND('',#84449,.T.); +#84449 = EDGE_LOOP('',(#84450,#84451,#84458,#84459)); +#84450 = ORIENTED_EDGE('',*,*,#84357,.F.); +#84451 = ORIENTED_EDGE('',*,*,#84452,.T.); +#84452 = EDGE_CURVE('',#84350,#83732,#84453,.T.); +#84453 = CIRCLE('',#84454,1.E-01); +#84454 = AXIS2_PLACEMENT_3D('',#84455,#84456,#84457); +#84455 = CARTESIAN_POINT('',(4.44,-0.9,0.338402894381)); +#84456 = DIRECTION('',(-1.,0.,0.)); +#84457 = DIRECTION('',(0.,0.,1.)); +#84458 = ORIENTED_EDGE('',*,*,#83729,.F.); +#84459 = ORIENTED_EDGE('',*,*,#84460,.T.); +#84460 = EDGE_CURVE('',#83730,#84358,#84461,.T.); +#84461 = CIRCLE('',#84462,1.E-01); +#84462 = AXIS2_PLACEMENT_3D('',#84463,#84464,#84465); +#84463 = CARTESIAN_POINT('',(4.2,-0.9,0.338402894381)); +#84464 = DIRECTION('',(1.,0.,0.)); +#84465 = DIRECTION('',(0.,0.,-1.)); +#84466 = CYLINDRICAL_SURFACE('',#84467,1.E-01); +#84467 = AXIS2_PLACEMENT_3D('',#84468,#84469,#84470); +#84468 = CARTESIAN_POINT('',(4.47,-0.9,0.338402894381)); +#84469 = DIRECTION('',(1.,0.,0.)); +#84470 = DIRECTION('',(0.,0.,-1.)); +#84471 = ADVANCED_FACE('',(#84472),#84490,.F.); +#84472 = FACE_BOUND('',#84473,.F.); +#84473 = EDGE_LOOP('',(#84474,#84481,#84482,#84489)); +#84474 = ORIENTED_EDGE('',*,*,#84475,.F.); +#84475 = EDGE_CURVE('',#83770,#81932,#84476,.T.); +#84476 = CIRCLE('',#84477,0.2); +#84477 = AXIS2_PLACEMENT_3D('',#84478,#84479,#84480); +#84478 = CARTESIAN_POINT('',(4.2,-3.45,1.25)); +#84479 = DIRECTION('',(-1.,-0.,-0.)); +#84480 = DIRECTION('',(0.,0.,-1.)); +#84481 = ORIENTED_EDGE('',*,*,#83769,.T.); +#84482 = ORIENTED_EDGE('',*,*,#84483,.F.); +#84483 = EDGE_CURVE('',#81924,#83772,#84484,.T.); +#84484 = CIRCLE('',#84485,0.2); +#84485 = AXIS2_PLACEMENT_3D('',#84486,#84487,#84488); +#84486 = CARTESIAN_POINT('',(4.44,-3.45,1.25)); +#84487 = DIRECTION('',(1.,0.,-0.)); +#84488 = DIRECTION('',(0.,0.,1.)); +#84489 = ORIENTED_EDGE('',*,*,#81931,.T.); +#84490 = CYLINDRICAL_SURFACE('',#84491,0.2); +#84491 = AXIS2_PLACEMENT_3D('',#84492,#84493,#84494); +#84492 = CARTESIAN_POINT('',(4.47,-3.45,1.25)); +#84493 = DIRECTION('',(1.,1.445602896647E-15,0.)); +#84494 = DIRECTION('',(-1.445602896647E-15,1.,0.)); +#84495 = ADVANCED_FACE('',(#84496),#84514,.F.); +#84496 = FACE_BOUND('',#84497,.F.); +#84497 = EDGE_LOOP('',(#84498,#84505,#84506,#84513)); +#84498 = ORIENTED_EDGE('',*,*,#84499,.F.); +#84499 = EDGE_CURVE('',#81914,#83348,#84500,.T.); +#84500 = CIRCLE('',#84501,0.2); +#84501 = AXIS2_PLACEMENT_3D('',#84502,#84503,#84504); +#84502 = CARTESIAN_POINT('',(4.2,-3.4,1.25)); +#84503 = DIRECTION('',(-1.,-0.,-0.)); +#84504 = DIRECTION('',(0.,0.,-1.)); +#84505 = ORIENTED_EDGE('',*,*,#81913,.T.); +#84506 = ORIENTED_EDGE('',*,*,#84507,.F.); +#84507 = EDGE_CURVE('',#83346,#81916,#84508,.T.); +#84508 = CIRCLE('',#84509,0.2); +#84509 = AXIS2_PLACEMENT_3D('',#84510,#84511,#84512); +#84510 = CARTESIAN_POINT('',(4.44,-3.4,1.25)); +#84511 = DIRECTION('',(1.,0.,-0.)); +#84512 = DIRECTION('',(0.,0.,1.)); +#84513 = ORIENTED_EDGE('',*,*,#83345,.T.); +#84514 = CYLINDRICAL_SURFACE('',#84515,0.2); +#84515 = AXIS2_PLACEMENT_3D('',#84516,#84517,#84518); +#84516 = CARTESIAN_POINT('',(4.47,-3.4,1.25)); +#84517 = DIRECTION('',(-1.,0.,0.)); +#84518 = DIRECTION('',(0.,0.,1.)); +#84519 = ADVANCED_FACE('',(#84520),#84538,.F.); +#84520 = FACE_BOUND('',#84521,.F.); +#84521 = EDGE_LOOP('',(#84522,#84529,#84530,#84537)); +#84522 = ORIENTED_EDGE('',*,*,#84523,.F.); +#84523 = EDGE_CURVE('',#83390,#81892,#84524,.T.); +#84524 = CIRCLE('',#84525,0.2); +#84525 = AXIS2_PLACEMENT_3D('',#84526,#84527,#84528); +#84526 = CARTESIAN_POINT('',(-4.2,-3.4,1.25)); +#84527 = DIRECTION('',(1.,0.,-0.)); +#84528 = DIRECTION('',(0.,0.,1.)); +#84529 = ORIENTED_EDGE('',*,*,#83397,.T.); +#84530 = ORIENTED_EDGE('',*,*,#84531,.F.); +#84531 = EDGE_CURVE('',#81884,#83398,#84532,.T.); +#84532 = CIRCLE('',#84533,0.2); +#84533 = AXIS2_PLACEMENT_3D('',#84534,#84535,#84536); +#84534 = CARTESIAN_POINT('',(-4.44,-3.4,1.25)); +#84535 = DIRECTION('',(-1.,-0.,-0.)); +#84536 = DIRECTION('',(0.,0.,-1.)); +#84537 = ORIENTED_EDGE('',*,*,#81891,.T.); +#84538 = CYLINDRICAL_SURFACE('',#84539,0.2); +#84539 = AXIS2_PLACEMENT_3D('',#84540,#84541,#84542); +#84540 = CARTESIAN_POINT('',(4.47,-3.4,1.25)); +#84541 = DIRECTION('',(-1.,0.,0.)); +#84542 = DIRECTION('',(0.,0.,1.)); +#84543 = ADVANCED_FACE('',(#84544),#84562,.F.); +#84544 = FACE_BOUND('',#84545,.F.); +#84545 = EDGE_LOOP('',(#84546,#84553,#84554,#84561)); +#84546 = ORIENTED_EDGE('',*,*,#84547,.F.); +#84547 = EDGE_CURVE('',#81874,#83948,#84548,.T.); +#84548 = CIRCLE('',#84549,0.2); +#84549 = AXIS2_PLACEMENT_3D('',#84550,#84551,#84552); +#84550 = CARTESIAN_POINT('',(-4.2,-3.45,1.25)); +#84551 = DIRECTION('',(1.,0.,-0.)); +#84552 = DIRECTION('',(0.,0.,1.)); +#84553 = ORIENTED_EDGE('',*,*,#81873,.T.); +#84554 = ORIENTED_EDGE('',*,*,#84555,.F.); +#84555 = EDGE_CURVE('',#83940,#81876,#84556,.T.); +#84556 = CIRCLE('',#84557,0.2); +#84557 = AXIS2_PLACEMENT_3D('',#84558,#84559,#84560); +#84558 = CARTESIAN_POINT('',(-4.44,-3.45,1.25)); +#84559 = DIRECTION('',(-1.,-0.,-0.)); +#84560 = DIRECTION('',(0.,0.,-1.)); +#84561 = ORIENTED_EDGE('',*,*,#83947,.T.); +#84562 = CYLINDRICAL_SURFACE('',#84563,0.2); +#84563 = AXIS2_PLACEMENT_3D('',#84564,#84565,#84566); +#84564 = CARTESIAN_POINT('',(-4.47,-3.45,1.25)); +#84565 = DIRECTION('',(1.,-2.891205793295E-15,0.)); +#84566 = DIRECTION('',(2.891205793295E-15,1.,0.)); +#84567 = ADVANCED_FACE('',(#84568),#84595,.F.); +#84568 = FACE_BOUND('',#84569,.F.); +#84569 = EDGE_LOOP('',(#84570,#84579,#84580,#84589)); +#84570 = ORIENTED_EDGE('',*,*,#84571,.F.); +#84571 = EDGE_CURVE('',#83643,#84572,#84574,.T.); +#84572 = VERTEX_POINT('',#84573); +#84573 = CARTESIAN_POINT('',(-4.2,0.6,1.45)); +#84574 = CIRCLE('',#84575,0.2); +#84575 = AXIS2_PLACEMENT_3D('',#84576,#84577,#84578); +#84576 = CARTESIAN_POINT('',(-4.2,0.6,1.25)); +#84577 = DIRECTION('',(1.,0.,-0.)); +#84578 = DIRECTION('',(0.,0.,1.)); +#84579 = ORIENTED_EDGE('',*,*,#83650,.T.); +#84580 = ORIENTED_EDGE('',*,*,#84581,.F.); +#84581 = EDGE_CURVE('',#84582,#83651,#84584,.T.); +#84582 = VERTEX_POINT('',#84583); +#84583 = CARTESIAN_POINT('',(-4.44,0.6,1.45)); +#84584 = CIRCLE('',#84585,0.2); +#84585 = AXIS2_PLACEMENT_3D('',#84586,#84587,#84588); +#84586 = CARTESIAN_POINT('',(-4.44,0.6,1.25)); +#84587 = DIRECTION('',(-1.,-0.,-0.)); +#84588 = DIRECTION('',(0.,0.,-1.)); +#84589 = ORIENTED_EDGE('',*,*,#84590,.T.); +#84590 = EDGE_CURVE('',#84582,#84572,#84591,.T.); +#84591 = LINE('',#84592,#84593); +#84592 = CARTESIAN_POINT('',(0.,0.6,1.45)); +#84593 = VECTOR('',#84594,1.); +#84594 = DIRECTION('',(1.,-0.,-0.)); +#84595 = CYLINDRICAL_SURFACE('',#84596,0.2); +#84596 = AXIS2_PLACEMENT_3D('',#84597,#84598,#84599); +#84597 = CARTESIAN_POINT('',(-7.04,0.6,1.25)); +#84598 = DIRECTION('',(-1.,0.,0.)); +#84599 = DIRECTION('',(0.,0.,1.)); +#84600 = ADVANCED_FACE('',(#84601),#84619,.F.); +#84601 = FACE_BOUND('',#84602,.F.); +#84602 = EDGE_LOOP('',(#84603,#84610,#84611,#84618)); +#84603 = ORIENTED_EDGE('',*,*,#84604,.F.); +#84604 = EDGE_CURVE('',#84572,#83868,#84605,.T.); +#84605 = CIRCLE('',#84606,0.2); +#84606 = AXIS2_PLACEMENT_3D('',#84607,#84608,#84609); +#84607 = CARTESIAN_POINT('',(-4.2,0.6,1.25)); +#84608 = DIRECTION('',(1.,0.,-0.)); +#84609 = DIRECTION('',(0.,-1.084202172486E-15,1.)); +#84610 = ORIENTED_EDGE('',*,*,#84590,.F.); +#84611 = ORIENTED_EDGE('',*,*,#84612,.F.); +#84612 = EDGE_CURVE('',#83860,#84582,#84613,.T.); +#84613 = CIRCLE('',#84614,0.2); +#84614 = AXIS2_PLACEMENT_3D('',#84615,#84616,#84617); +#84615 = CARTESIAN_POINT('',(-4.44,0.6,1.25)); +#84616 = DIRECTION('',(-1.,-0.,-0.)); +#84617 = DIRECTION('',(0.,0.,-1.)); +#84618 = ORIENTED_EDGE('',*,*,#83867,.T.); +#84619 = CYLINDRICAL_SURFACE('',#84620,0.2); +#84620 = AXIS2_PLACEMENT_3D('',#84621,#84622,#84623); +#84621 = CARTESIAN_POINT('',(-4.47,0.6,1.25)); +#84622 = DIRECTION('',(1.,0.,0.)); +#84623 = DIRECTION('',(0.,0.,-1.)); +#84624 = ADVANCED_FACE('',(#84625),#84652,.F.); +#84625 = FACE_BOUND('',#84626,.F.); +#84626 = EDGE_LOOP('',(#84627,#84636,#84644,#84651)); +#84627 = ORIENTED_EDGE('',*,*,#84628,.F.); +#84628 = EDGE_CURVE('',#84629,#83489,#84631,.T.); +#84629 = VERTEX_POINT('',#84630); +#84630 = CARTESIAN_POINT('',(-4.2,-1.2,1.45)); +#84631 = CIRCLE('',#84632,0.2); +#84632 = AXIS2_PLACEMENT_3D('',#84633,#84634,#84635); +#84633 = CARTESIAN_POINT('',(-4.2,-1.2,1.25)); +#84634 = DIRECTION('',(1.,0.,-0.)); +#84635 = DIRECTION('',(0.,0.,1.)); +#84636 = ORIENTED_EDGE('',*,*,#84637,.T.); +#84637 = EDGE_CURVE('',#84629,#84638,#84640,.T.); +#84638 = VERTEX_POINT('',#84639); +#84639 = CARTESIAN_POINT('',(-4.44,-1.2,1.45)); +#84640 = LINE('',#84641,#84642); +#84641 = CARTESIAN_POINT('',(-3.763346383834E-16,-1.2,1.45)); +#84642 = VECTOR('',#84643,1.); +#84643 = DIRECTION('',(-1.,3.136121986528E-16,-0.)); +#84644 = ORIENTED_EDGE('',*,*,#84645,.F.); +#84645 = EDGE_CURVE('',#83481,#84638,#84646,.T.); +#84646 = CIRCLE('',#84647,0.2); +#84647 = AXIS2_PLACEMENT_3D('',#84648,#84649,#84650); +#84648 = CARTESIAN_POINT('',(-4.44,-1.2,1.25)); +#84649 = DIRECTION('',(-1.,-0.,-0.)); +#84650 = DIRECTION('',(0.,0.,-1.)); +#84651 = ORIENTED_EDGE('',*,*,#83488,.T.); +#84652 = CYLINDRICAL_SURFACE('',#84653,0.2); +#84653 = AXIS2_PLACEMENT_3D('',#84654,#84655,#84656); +#84654 = CARTESIAN_POINT('',(-7.04,-1.2,1.25)); +#84655 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#84656 = DIRECTION('',(3.136121986528E-16,1.,0.)); +#84657 = ADVANCED_FACE('',(#84658),#84676,.F.); +#84658 = FACE_BOUND('',#84659,.F.); +#84659 = EDGE_LOOP('',(#84660,#84667,#84668,#84675)); +#84660 = ORIENTED_EDGE('',*,*,#84661,.F.); +#84661 = EDGE_CURVE('',#83890,#84629,#84662,.T.); +#84662 = CIRCLE('',#84663,0.2); +#84663 = AXIS2_PLACEMENT_3D('',#84664,#84665,#84666); +#84664 = CARTESIAN_POINT('',(-4.2,-1.2,1.25)); +#84665 = DIRECTION('',(1.,0.,-0.)); +#84666 = DIRECTION('',(0.,-3.252606517457E-15,1.)); +#84667 = ORIENTED_EDGE('',*,*,#83889,.T.); +#84668 = ORIENTED_EDGE('',*,*,#84669,.F.); +#84669 = EDGE_CURVE('',#84638,#83892,#84670,.T.); +#84670 = CIRCLE('',#84671,0.2); +#84671 = AXIS2_PLACEMENT_3D('',#84672,#84673,#84674); +#84672 = CARTESIAN_POINT('',(-4.44,-1.2,1.25)); +#84673 = DIRECTION('',(-1.,-0.,-0.)); +#84674 = DIRECTION('',(0.,0.,-1.)); +#84675 = ORIENTED_EDGE('',*,*,#84637,.F.); +#84676 = CYLINDRICAL_SURFACE('',#84677,0.2); +#84677 = AXIS2_PLACEMENT_3D('',#84678,#84679,#84680); +#84678 = CARTESIAN_POINT('',(-4.47,-1.2,1.25)); +#84679 = DIRECTION('',(-1.,0.,0.)); +#84680 = DIRECTION('',(0.,0.,1.)); +#84681 = ADVANCED_FACE('',(#84682),#84709,.F.); +#84682 = FACE_BOUND('',#84683,.F.); +#84683 = EDGE_LOOP('',(#84684,#84693,#84701,#84708)); +#84684 = ORIENTED_EDGE('',*,*,#84685,.F.); +#84685 = EDGE_CURVE('',#84686,#83748,#84688,.T.); +#84686 = VERTEX_POINT('',#84687); +#84687 = CARTESIAN_POINT('',(4.2,-1.2,1.45)); +#84688 = CIRCLE('',#84689,0.2); +#84689 = AXIS2_PLACEMENT_3D('',#84690,#84691,#84692); +#84690 = CARTESIAN_POINT('',(4.2,-1.2,1.25)); +#84691 = DIRECTION('',(-1.,-0.,-0.)); +#84692 = DIRECTION('',(0.,0.,-1.)); +#84693 = ORIENTED_EDGE('',*,*,#84694,.T.); +#84694 = EDGE_CURVE('',#84686,#84695,#84697,.T.); +#84695 = VERTEX_POINT('',#84696); +#84696 = CARTESIAN_POINT('',(4.44,-1.2,1.45)); +#84697 = LINE('',#84698,#84699); +#84698 = CARTESIAN_POINT('',(0.,-1.2,1.45)); +#84699 = VECTOR('',#84700,1.); +#84700 = DIRECTION('',(1.,-0.,-0.)); +#84701 = ORIENTED_EDGE('',*,*,#84702,.F.); +#84702 = EDGE_CURVE('',#83740,#84695,#84703,.T.); +#84703 = CIRCLE('',#84704,0.2); +#84704 = AXIS2_PLACEMENT_3D('',#84705,#84706,#84707); +#84705 = CARTESIAN_POINT('',(4.44,-1.2,1.25)); +#84706 = DIRECTION('',(1.,0.,-0.)); +#84707 = DIRECTION('',(0.,0.,1.)); +#84708 = ORIENTED_EDGE('',*,*,#83747,.T.); +#84709 = CYLINDRICAL_SURFACE('',#84710,0.2); +#84710 = AXIS2_PLACEMENT_3D('',#84711,#84712,#84713); +#84711 = CARTESIAN_POINT('',(4.47,-1.2,1.25)); +#84712 = DIRECTION('',(-1.,0.,0.)); +#84713 = DIRECTION('',(0.,0.,1.)); +#84714 = ADVANCED_FACE('',(#84715),#84733,.F.); +#84715 = FACE_BOUND('',#84716,.F.); +#84716 = EDGE_LOOP('',(#84717,#84724,#84725,#84732)); +#84717 = ORIENTED_EDGE('',*,*,#84718,.F.); +#84718 = EDGE_CURVE('',#83281,#84686,#84719,.T.); +#84719 = CIRCLE('',#84720,0.2); +#84720 = AXIS2_PLACEMENT_3D('',#84721,#84722,#84723); +#84721 = CARTESIAN_POINT('',(4.2,-1.2,1.25)); +#84722 = DIRECTION('',(-1.,-0.,-0.)); +#84723 = DIRECTION('',(0.,0.,-1.)); +#84724 = ORIENTED_EDGE('',*,*,#83280,.T.); +#84725 = ORIENTED_EDGE('',*,*,#84726,.F.); +#84726 = EDGE_CURVE('',#84695,#83283,#84727,.T.); +#84727 = CIRCLE('',#84728,0.2); +#84728 = AXIS2_PLACEMENT_3D('',#84729,#84730,#84731); +#84729 = CARTESIAN_POINT('',(4.44,-1.2,1.25)); +#84730 = DIRECTION('',(1.,0.,-0.)); +#84731 = DIRECTION('',(0.,-1.084202172486E-15,1.)); +#84732 = ORIENTED_EDGE('',*,*,#84694,.F.); +#84733 = CYLINDRICAL_SURFACE('',#84734,0.2); +#84734 = AXIS2_PLACEMENT_3D('',#84735,#84736,#84737); +#84735 = CARTESIAN_POINT('',(7.04,-1.2,1.25)); +#84736 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#84737 = DIRECTION('',(-4.480174266469E-17,1.,0.)); +#84738 = ADVANCED_FACE('',(#84739),#84766,.F.); +#84739 = FACE_BOUND('',#84740,.F.); +#84740 = EDGE_LOOP('',(#84741,#84750,#84758,#84765)); +#84741 = ORIENTED_EDGE('',*,*,#84742,.F.); +#84742 = EDGE_CURVE('',#84743,#83242,#84745,.T.); +#84743 = VERTEX_POINT('',#84744); +#84744 = CARTESIAN_POINT('',(4.2,0.6,1.45)); +#84745 = CIRCLE('',#84746,0.2); +#84746 = AXIS2_PLACEMENT_3D('',#84747,#84748,#84749); +#84747 = CARTESIAN_POINT('',(4.2,0.6,1.25)); +#84748 = DIRECTION('',(-1.,-0.,-0.)); +#84749 = DIRECTION('',(0.,0.,-1.)); +#84750 = ORIENTED_EDGE('',*,*,#84751,.T.); +#84751 = EDGE_CURVE('',#84743,#84752,#84754,.T.); +#84752 = VERTEX_POINT('',#84753); +#84753 = CARTESIAN_POINT('',(4.44,0.6,1.45)); +#84754 = LINE('',#84755,#84756); +#84755 = CARTESIAN_POINT('',(0.,0.6,1.45)); +#84756 = VECTOR('',#84757,1.); +#84757 = DIRECTION('',(1.,-0.,-0.)); +#84758 = ORIENTED_EDGE('',*,*,#84759,.F.); +#84759 = EDGE_CURVE('',#83234,#84752,#84760,.T.); +#84760 = CIRCLE('',#84761,0.2); +#84761 = AXIS2_PLACEMENT_3D('',#84762,#84763,#84764); +#84762 = CARTESIAN_POINT('',(4.44,0.6,1.25)); +#84763 = DIRECTION('',(1.,0.,-0.)); +#84764 = DIRECTION('',(0.,0.,1.)); +#84765 = ORIENTED_EDGE('',*,*,#83241,.T.); +#84766 = CYLINDRICAL_SURFACE('',#84767,0.2); +#84767 = AXIS2_PLACEMENT_3D('',#84768,#84769,#84770); +#84768 = CARTESIAN_POINT('',(7.04,0.6,1.25)); +#84769 = DIRECTION('',(-1.,0.,0.)); +#84770 = DIRECTION('',(0.,0.,1.)); +#84771 = ADVANCED_FACE('',(#84772),#84790,.F.); +#84772 = FACE_BOUND('',#84773,.F.); +#84773 = EDGE_LOOP('',(#84774,#84781,#84782,#84789)); +#84774 = ORIENTED_EDGE('',*,*,#84775,.F.); +#84775 = EDGE_CURVE('',#83690,#84743,#84776,.T.); +#84776 = CIRCLE('',#84777,0.2); +#84777 = AXIS2_PLACEMENT_3D('',#84778,#84779,#84780); +#84778 = CARTESIAN_POINT('',(4.2,0.6,1.25)); +#84779 = DIRECTION('',(-1.,-0.,-0.)); +#84780 = DIRECTION('',(0.,0.,-1.)); +#84781 = ORIENTED_EDGE('',*,*,#83689,.T.); +#84782 = ORIENTED_EDGE('',*,*,#84783,.F.); +#84783 = EDGE_CURVE('',#84752,#83692,#84784,.T.); +#84784 = CIRCLE('',#84785,0.2); +#84785 = AXIS2_PLACEMENT_3D('',#84786,#84787,#84788); +#84786 = CARTESIAN_POINT('',(4.44,0.6,1.25)); +#84787 = DIRECTION('',(1.,0.,-0.)); +#84788 = DIRECTION('',(0.,-1.084202172486E-15,1.)); +#84789 = ORIENTED_EDGE('',*,*,#84751,.F.); +#84790 = CYLINDRICAL_SURFACE('',#84791,0.2); +#84791 = AXIS2_PLACEMENT_3D('',#84792,#84793,#84794); +#84792 = CARTESIAN_POINT('',(4.47,0.6,1.25)); +#84793 = DIRECTION('',(1.,0.,0.)); +#84794 = DIRECTION('',(0.,0.,-1.)); +#84795 = ADVANCED_FACE('',(#84796),#84830,.F.); +#84796 = FACE_BOUND('',#84797,.T.); +#84797 = EDGE_LOOP('',(#84798,#84808,#84816,#84824)); +#84798 = ORIENTED_EDGE('',*,*,#84799,.T.); +#84799 = EDGE_CURVE('',#84800,#84802,#84804,.T.); +#84800 = VERTEX_POINT('',#84801); +#84801 = CARTESIAN_POINT('',(-3.1,-3.75,2.98)); +#84802 = VERTEX_POINT('',#84803); +#84803 = CARTESIAN_POINT('',(-3.1,-3.75,3.22)); +#84804 = LINE('',#84805,#84806); +#84805 = CARTESIAN_POINT('',(-3.1,-3.75,3.25)); +#84806 = VECTOR('',#84807,1.); +#84807 = DIRECTION('',(0.,-0.,1.)); +#84808 = ORIENTED_EDGE('',*,*,#84809,.T.); +#84809 = EDGE_CURVE('',#84802,#84810,#84812,.T.); +#84810 = VERTEX_POINT('',#84811); +#84811 = CARTESIAN_POINT('',(-3.1,-4.55,3.22)); +#84812 = LINE('',#84813,#84814); +#84813 = CARTESIAN_POINT('',(-3.1,-4.7,3.22)); +#84814 = VECTOR('',#84815,1.); +#84815 = DIRECTION('',(0.,-1.,0.)); +#84816 = ORIENTED_EDGE('',*,*,#84817,.T.); +#84817 = EDGE_CURVE('',#84810,#84818,#84820,.T.); +#84818 = VERTEX_POINT('',#84819); +#84819 = CARTESIAN_POINT('',(-3.1,-4.55,2.98)); +#84820 = LINE('',#84821,#84822); +#84821 = CARTESIAN_POINT('',(-3.1,-4.55,-0.851)); +#84822 = VECTOR('',#84823,1.); +#84823 = DIRECTION('',(-0.,-0.,-1.)); +#84824 = ORIENTED_EDGE('',*,*,#84825,.T.); +#84825 = EDGE_CURVE('',#84818,#84800,#84826,.T.); +#84826 = LINE('',#84827,#84828); +#84827 = CARTESIAN_POINT('',(-3.1,-4.7,2.98)); +#84828 = VECTOR('',#84829,1.); +#84829 = DIRECTION('',(0.,1.,0.)); +#84830 = PLANE('',#84831); +#84831 = AXIS2_PLACEMENT_3D('',#84832,#84833,#84834); +#84832 = CARTESIAN_POINT('',(-3.1,-4.7,-0.851)); +#84833 = DIRECTION('',(-1.,0.,0.)); +#84834 = DIRECTION('',(0.,0.,1.)); +#84835 = ADVANCED_FACE('',(#84836),#84870,.F.); +#84836 = FACE_BOUND('',#84837,.T.); +#84837 = EDGE_LOOP('',(#84838,#84848,#84856,#84864)); +#84838 = ORIENTED_EDGE('',*,*,#84839,.T.); +#84839 = EDGE_CURVE('',#84840,#84842,#84844,.T.); +#84840 = VERTEX_POINT('',#84841); +#84841 = CARTESIAN_POINT('',(-1.25,-3.6,2.98)); +#84842 = VERTEX_POINT('',#84843); +#84843 = CARTESIAN_POINT('',(-1.25,-3.6,3.22)); +#84844 = LINE('',#84845,#84846); +#84845 = CARTESIAN_POINT('',(-1.25,-3.6,3.25)); +#84846 = VECTOR('',#84847,1.); +#84847 = DIRECTION('',(0.,-0.,1.)); +#84848 = ORIENTED_EDGE('',*,*,#84849,.T.); +#84849 = EDGE_CURVE('',#84842,#84850,#84852,.T.); +#84850 = VERTEX_POINT('',#84851); +#84851 = CARTESIAN_POINT('',(-2.95,-3.6,3.22)); +#84852 = LINE('',#84853,#84854); +#84853 = CARTESIAN_POINT('',(-3.1,-3.6,3.22)); +#84854 = VECTOR('',#84855,1.); +#84855 = DIRECTION('',(-1.,0.,0.)); +#84856 = ORIENTED_EDGE('',*,*,#84857,.T.); +#84857 = EDGE_CURVE('',#84850,#84858,#84860,.T.); +#84858 = VERTEX_POINT('',#84859); +#84859 = CARTESIAN_POINT('',(-2.95,-3.6,2.98)); +#84860 = LINE('',#84861,#84862); +#84861 = CARTESIAN_POINT('',(-2.95,-3.6,2.95)); +#84862 = VECTOR('',#84863,1.); +#84863 = DIRECTION('',(-0.,0.,-1.)); +#84864 = ORIENTED_EDGE('',*,*,#84865,.T.); +#84865 = EDGE_CURVE('',#84858,#84840,#84866,.T.); +#84866 = LINE('',#84867,#84868); +#84867 = CARTESIAN_POINT('',(-3.1,-3.6,2.98)); +#84868 = VECTOR('',#84869,1.); +#84869 = DIRECTION('',(1.,0.,0.)); +#84870 = PLANE('',#84871); +#84871 = AXIS2_PLACEMENT_3D('',#84872,#84873,#84874); +#84872 = CARTESIAN_POINT('',(-3.1,-3.6,-0.851)); +#84873 = DIRECTION('',(-0.,1.,0.)); +#84874 = DIRECTION('',(0.,0.,1.)); +#84875 = ADVANCED_FACE('',(#84876),#84910,.F.); +#84876 = FACE_BOUND('',#84877,.T.); +#84877 = EDGE_LOOP('',(#84878,#84888,#84896,#84904)); +#84878 = ORIENTED_EDGE('',*,*,#84879,.T.); +#84879 = EDGE_CURVE('',#84880,#84882,#84884,.T.); +#84880 = VERTEX_POINT('',#84881); +#84881 = CARTESIAN_POINT('',(2.95,-3.6,2.98)); +#84882 = VERTEX_POINT('',#84883); +#84883 = CARTESIAN_POINT('',(2.95,-3.6,3.22)); +#84884 = LINE('',#84885,#84886); +#84885 = CARTESIAN_POINT('',(2.95,-3.6,3.25)); +#84886 = VECTOR('',#84887,1.); +#84887 = DIRECTION('',(-0.,0.,1.)); +#84888 = ORIENTED_EDGE('',*,*,#84889,.T.); +#84889 = EDGE_CURVE('',#84882,#84890,#84892,.T.); +#84890 = VERTEX_POINT('',#84891); +#84891 = CARTESIAN_POINT('',(1.25,-3.6,3.22)); +#84892 = LINE('',#84893,#84894); +#84893 = CARTESIAN_POINT('',(3.1,-3.6,3.22)); +#84894 = VECTOR('',#84895,1.); +#84895 = DIRECTION('',(-1.,8.673617379884E-16,0.)); +#84896 = ORIENTED_EDGE('',*,*,#84897,.T.); +#84897 = EDGE_CURVE('',#84890,#84898,#84900,.T.); +#84898 = VERTEX_POINT('',#84899); +#84899 = CARTESIAN_POINT('',(1.25,-3.6,2.98)); +#84900 = LINE('',#84901,#84902); +#84901 = CARTESIAN_POINT('',(1.25,-3.6,2.95)); +#84902 = VECTOR('',#84903,1.); +#84903 = DIRECTION('',(0.,-0.,-1.)); +#84904 = ORIENTED_EDGE('',*,*,#84905,.T.); +#84905 = EDGE_CURVE('',#84898,#84880,#84906,.T.); +#84906 = LINE('',#84907,#84908); +#84907 = CARTESIAN_POINT('',(3.1,-3.6,2.98)); +#84908 = VECTOR('',#84909,1.); +#84909 = DIRECTION('',(1.,-8.673617379884E-16,-0.)); +#84910 = PLANE('',#84911); +#84911 = AXIS2_PLACEMENT_3D('',#84912,#84913,#84914); +#84912 = CARTESIAN_POINT('',(3.1,-3.6,-0.851)); +#84913 = DIRECTION('',(8.673617379884E-16,1.,0.)); +#84914 = DIRECTION('',(-1.,8.673617379884E-16,0.)); +#84915 = ADVANCED_FACE('',(#84916),#84950,.F.); +#84916 = FACE_BOUND('',#84917,.T.); +#84917 = EDGE_LOOP('',(#84918,#84928,#84936,#84944)); +#84918 = ORIENTED_EDGE('',*,*,#84919,.T.); +#84919 = EDGE_CURVE('',#84920,#84922,#84924,.T.); +#84920 = VERTEX_POINT('',#84921); +#84921 = CARTESIAN_POINT('',(3.1,-4.55,2.98)); +#84922 = VERTEX_POINT('',#84923); +#84923 = CARTESIAN_POINT('',(3.1,-4.55,3.22)); +#84924 = LINE('',#84925,#84926); +#84925 = CARTESIAN_POINT('',(3.1,-4.55,-0.851)); +#84926 = VECTOR('',#84927,1.); +#84927 = DIRECTION('',(-0.,0.,1.)); +#84928 = ORIENTED_EDGE('',*,*,#84929,.T.); +#84929 = EDGE_CURVE('',#84922,#84930,#84932,.T.); +#84930 = VERTEX_POINT('',#84931); +#84931 = CARTESIAN_POINT('',(3.1,-3.75,3.22)); +#84932 = LINE('',#84933,#84934); +#84933 = CARTESIAN_POINT('',(3.1,-4.7,3.22)); +#84934 = VECTOR('',#84935,1.); +#84935 = DIRECTION('',(7.885106708985E-16,1.,0.)); +#84936 = ORIENTED_EDGE('',*,*,#84937,.T.); +#84937 = EDGE_CURVE('',#84930,#84938,#84940,.T.); +#84938 = VERTEX_POINT('',#84939); +#84939 = CARTESIAN_POINT('',(3.1,-3.75,2.98)); +#84940 = LINE('',#84941,#84942); +#84941 = CARTESIAN_POINT('',(3.1,-3.75,2.95)); +#84942 = VECTOR('',#84943,1.); +#84943 = DIRECTION('',(-0.,-0.,-1.)); +#84944 = ORIENTED_EDGE('',*,*,#84945,.T.); +#84945 = EDGE_CURVE('',#84938,#84920,#84946,.T.); +#84946 = LINE('',#84947,#84948); +#84947 = CARTESIAN_POINT('',(3.1,-4.7,2.98)); +#84948 = VECTOR('',#84949,1.); +#84949 = DIRECTION('',(-7.885106708985E-16,-1.,0.)); +#84950 = PLANE('',#84951); +#84951 = AXIS2_PLACEMENT_3D('',#84952,#84953,#84954); +#84952 = CARTESIAN_POINT('',(3.1,-4.7,-0.851)); +#84953 = DIRECTION('',(1.,-7.885106708985E-16,0.)); +#84954 = DIRECTION('',(7.885106708985E-16,1.,0.)); +#84955 = ADVANCED_FACE('',(#84956),#84990,.F.); +#84956 = FACE_BOUND('',#84957,.T.); +#84957 = EDGE_LOOP('',(#84958,#84968,#84976,#84984)); +#84958 = ORIENTED_EDGE('',*,*,#84959,.T.); +#84959 = EDGE_CURVE('',#84960,#84962,#84964,.T.); +#84960 = VERTEX_POINT('',#84961); +#84961 = CARTESIAN_POINT('',(-1.963651795679,-3.9,2.199682015895)); +#84962 = VERTEX_POINT('',#84963); +#84963 = CARTESIAN_POINT('',(-2.145873380247,-3.9,2.355871945524)); +#84964 = LINE('',#84965,#84966); +#84965 = CARTESIAN_POINT('',(-2.168651078318,-3.9,2.375395686728)); +#84966 = VECTOR('',#84967,1.); +#84967 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#84968 = ORIENTED_EDGE('',*,*,#84969,.T.); +#84969 = EDGE_CURVE('',#84962,#84970,#84972,.T.); +#84970 = VERTEX_POINT('',#84971); +#84971 = CARTESIAN_POINT('',(-1.515941212258,-3.9,3.090792808179)); +#84972 = LINE('',#84973,#84974); +#84973 = CARTESIAN_POINT('',(-1.515941212258,-3.9,3.090792808179)); +#84974 = VECTOR('',#84975,1.); +#84975 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#84976 = ORIENTED_EDGE('',*,*,#84977,.F.); +#84977 = EDGE_CURVE('',#84978,#84970,#84980,.T.); +#84978 = VERTEX_POINT('',#84979); +#84979 = CARTESIAN_POINT('',(-1.33371962769,-3.9,2.934602878549)); +#84980 = LINE('',#84981,#84982); +#84981 = CARTESIAN_POINT('',(-1.538718910329,-3.9,3.110316549382)); +#84982 = VECTOR('',#84983,1.); +#84983 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#84984 = ORIENTED_EDGE('',*,*,#84985,.T.); +#84985 = EDGE_CURVE('',#84978,#84960,#84986,.T.); +#84986 = LINE('',#84987,#84988); +#84987 = CARTESIAN_POINT('',(-1.33371962769,-3.9,2.934602878549)); +#84988 = VECTOR('',#84989,1.); +#84989 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#84990 = PLANE('',#84991); +#84991 = AXIS2_PLACEMENT_3D('',#84992,#84993,#84994); +#84992 = CARTESIAN_POINT('',(-1.538718910329,-3.9,3.110316549382)); +#84993 = DIRECTION('',(0.,-1.,0.)); +#84994 = DIRECTION('',(0.,-0.,-1.)); +#84995 = ADVANCED_FACE('',(#84996),#85048,.F.); +#84996 = FACE_BOUND('',#84997,.T.); +#84997 = EDGE_LOOP('',(#84998,#85009,#85017,#85025,#85033,#85042)); +#84998 = ORIENTED_EDGE('',*,*,#84999,.T.); +#84999 = EDGE_CURVE('',#85000,#85002,#85004,.T.); +#85000 = VERTEX_POINT('',#85001); +#85001 = CARTESIAN_POINT('',(-2.116587768442,-4.2,1.975158992053)); +#85002 = VERTEX_POINT('',#85003); +#85003 = CARTESIAN_POINT('',(-1.940874097608,-3.93,2.180158274691)); +#85004 = CIRCLE('',#85005,0.27); +#85005 = AXIS2_PLACEMENT_3D('',#85006,#85007,#85008); +#85006 = CARTESIAN_POINT('',(-1.940874097608,-4.2,2.180158274691)); +#85007 = DIRECTION('',(0.759256602365,-2.101836365675E-31, + -0.650791373456)); +#85008 = DIRECTION('',(0.650791373456,-3.212450881439E-15,0.759256602365 + )); +#85009 = ORIENTED_EDGE('',*,*,#85010,.T.); +#85010 = EDGE_CURVE('',#85002,#85011,#85013,.T.); +#85011 = VERTEX_POINT('',#85012); +#85012 = CARTESIAN_POINT('',(-1.310941929619,-3.93,2.915079137346)); +#85013 = LINE('',#85014,#85015); +#85014 = CARTESIAN_POINT('',(-1.310941929619,-3.93,2.915079137346)); +#85015 = VECTOR('',#85016,1.); +#85016 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#85017 = ORIENTED_EDGE('',*,*,#85018,.F.); +#85018 = EDGE_CURVE('',#85019,#85011,#85021,.T.); +#85019 = VERTEX_POINT('',#85020); +#85020 = CARTESIAN_POINT('',(-1.310941929619,-4.67,2.915079137346)); +#85021 = LINE('',#85022,#85023); +#85022 = CARTESIAN_POINT('',(-1.310941929619,-4.7,2.915079137346)); +#85023 = VECTOR('',#85024,1.); +#85024 = DIRECTION('',(0.,1.,0.)); +#85025 = ORIENTED_EDGE('',*,*,#85026,.T.); +#85026 = EDGE_CURVE('',#85019,#85027,#85029,.T.); +#85027 = VERTEX_POINT('',#85028); +#85028 = CARTESIAN_POINT('',(-1.940874097608,-4.67,2.180158274691)); +#85029 = LINE('',#85030,#85031); +#85030 = CARTESIAN_POINT('',(-1.310941929619,-4.67,2.915079137346)); +#85031 = VECTOR('',#85032,1.); +#85032 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85033 = ORIENTED_EDGE('',*,*,#85034,.T.); +#85034 = EDGE_CURVE('',#85027,#85035,#85037,.T.); +#85035 = VERTEX_POINT('',#85036); +#85036 = CARTESIAN_POINT('',(-2.116587768442,-4.4,1.975158992053)); +#85037 = CIRCLE('',#85038,0.27); +#85038 = AXIS2_PLACEMENT_3D('',#85039,#85040,#85041); +#85039 = CARTESIAN_POINT('',(-1.940874097608,-4.4,2.180158274691)); +#85040 = DIRECTION('',(0.759256602365,2.101836365675E-31,-0.650791373456 + )); +#85041 = DIRECTION('',(0.650791373456,3.212450881439E-15,0.759256602365) + ); +#85042 = ORIENTED_EDGE('',*,*,#85043,.T.); +#85043 = EDGE_CURVE('',#85035,#85000,#85044,.T.); +#85044 = LINE('',#85045,#85046); +#85045 = CARTESIAN_POINT('',(-2.116587768442,-4.2,1.975158992053)); +#85046 = VECTOR('',#85047,1.); +#85047 = DIRECTION('',(0.,1.,0.)); +#85048 = PLANE('',#85049); +#85049 = AXIS2_PLACEMENT_3D('',#85050,#85051,#85052); +#85050 = CARTESIAN_POINT('',(-1.310941929619,-4.7,2.915079137346)); +#85051 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#85052 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#85053 = ADVANCED_FACE('',(#85054),#85088,.F.); +#85054 = FACE_BOUND('',#85055,.T.); +#85055 = EDGE_LOOP('',(#85056,#85066,#85074,#85082)); +#85056 = ORIENTED_EDGE('',*,*,#85057,.F.); +#85057 = EDGE_CURVE('',#85058,#85060,#85062,.T.); +#85058 = VERTEX_POINT('',#85059); +#85059 = CARTESIAN_POINT('',(-1.515941212258,-4.7,3.090792808179)); +#85060 = VERTEX_POINT('',#85061); +#85061 = CARTESIAN_POINT('',(-1.33371962769,-4.7,2.934602878549)); +#85062 = LINE('',#85063,#85064); +#85063 = CARTESIAN_POINT('',(-1.538718910329,-4.7,3.110316549382)); +#85064 = VECTOR('',#85065,1.); +#85065 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#85066 = ORIENTED_EDGE('',*,*,#85067,.T.); +#85067 = EDGE_CURVE('',#85058,#85068,#85070,.T.); +#85068 = VERTEX_POINT('',#85069); +#85069 = CARTESIAN_POINT('',(-2.145873380247,-4.7,2.355871945524)); +#85070 = LINE('',#85071,#85072); +#85071 = CARTESIAN_POINT('',(-1.515941212258,-4.7,3.090792808179)); +#85072 = VECTOR('',#85073,1.); +#85073 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85074 = ORIENTED_EDGE('',*,*,#85075,.T.); +#85075 = EDGE_CURVE('',#85068,#85076,#85078,.T.); +#85076 = VERTEX_POINT('',#85077); +#85077 = CARTESIAN_POINT('',(-1.963651795679,-4.7,2.199682015895)); +#85078 = LINE('',#85079,#85080); +#85079 = CARTESIAN_POINT('',(-1.940874097608,-4.7,2.180158274691)); +#85080 = VECTOR('',#85081,1.); +#85081 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#85082 = ORIENTED_EDGE('',*,*,#85083,.T.); +#85083 = EDGE_CURVE('',#85076,#85060,#85084,.T.); +#85084 = LINE('',#85085,#85086); +#85085 = CARTESIAN_POINT('',(-1.33371962769,-4.7,2.934602878549)); +#85086 = VECTOR('',#85087,1.); +#85087 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#85088 = PLANE('',#85089); +#85089 = AXIS2_PLACEMENT_3D('',#85090,#85091,#85092); +#85090 = CARTESIAN_POINT('',(-1.538718910329,-4.7,3.110316549382)); +#85091 = DIRECTION('',(0.,1.,0.)); +#85092 = DIRECTION('',(0.,-0.,1.)); +#85093 = ADVANCED_FACE('',(#85094),#85146,.F.); +#85094 = FACE_BOUND('',#85095,.T.); +#85095 = EDGE_LOOP('',(#85096,#85107,#85115,#85123,#85131,#85140)); +#85096 = ORIENTED_EDGE('',*,*,#85097,.T.); +#85097 = EDGE_CURVE('',#85098,#85100,#85102,.T.); +#85098 = VERTEX_POINT('',#85099); +#85099 = CARTESIAN_POINT('',(-2.344364749151,-4.4,2.170396404089)); +#85100 = VERTEX_POINT('',#85101); +#85101 = CARTESIAN_POINT('',(-2.168651078318,-4.67,2.375395686728)); +#85102 = CIRCLE('',#85103,0.27); +#85103 = AXIS2_PLACEMENT_3D('',#85104,#85105,#85106); +#85104 = CARTESIAN_POINT('',(-2.168651078318,-4.4,2.375395686728)); +#85105 = DIRECTION('',(-0.759256602365,-0.,0.650791373456)); +#85106 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85107 = ORIENTED_EDGE('',*,*,#85108,.T.); +#85108 = EDGE_CURVE('',#85100,#85109,#85111,.T.); +#85109 = VERTEX_POINT('',#85110); +#85110 = CARTESIAN_POINT('',(-1.538718910329,-4.67,3.110316549382)); +#85111 = LINE('',#85112,#85113); +#85112 = CARTESIAN_POINT('',(-1.538718910329,-4.67,3.110316549382)); +#85113 = VECTOR('',#85114,1.); +#85114 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#85115 = ORIENTED_EDGE('',*,*,#85116,.F.); +#85116 = EDGE_CURVE('',#85117,#85109,#85119,.T.); +#85117 = VERTEX_POINT('',#85118); +#85118 = CARTESIAN_POINT('',(-1.538718910329,-3.93,3.110316549382)); +#85119 = LINE('',#85120,#85121); +#85120 = CARTESIAN_POINT('',(-1.538718910329,-4.7,3.110316549382)); +#85121 = VECTOR('',#85122,1.); +#85122 = DIRECTION('',(0.,-1.,0.)); +#85123 = ORIENTED_EDGE('',*,*,#85124,.T.); +#85124 = EDGE_CURVE('',#85117,#85125,#85127,.T.); +#85125 = VERTEX_POINT('',#85126); +#85126 = CARTESIAN_POINT('',(-2.168651078318,-3.93,2.375395686728)); +#85127 = LINE('',#85128,#85129); +#85128 = CARTESIAN_POINT('',(-1.538718910329,-3.93,3.110316549382)); +#85129 = VECTOR('',#85130,1.); +#85130 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85131 = ORIENTED_EDGE('',*,*,#85132,.T.); +#85132 = EDGE_CURVE('',#85125,#85133,#85135,.T.); +#85133 = VERTEX_POINT('',#85134); +#85134 = CARTESIAN_POINT('',(-2.344364749151,-4.2,2.170396404089)); +#85135 = CIRCLE('',#85136,0.27); +#85136 = AXIS2_PLACEMENT_3D('',#85137,#85138,#85139); +#85137 = CARTESIAN_POINT('',(-2.168651078318,-4.2,2.375395686728)); +#85138 = DIRECTION('',(-0.759256602365,-2.02705819834E-32,0.650791373456 + )); +#85139 = DIRECTION('',(-0.650791373456,-3.212450881439E-15, + -0.759256602365)); +#85140 = ORIENTED_EDGE('',*,*,#85141,.T.); +#85141 = EDGE_CURVE('',#85133,#85098,#85142,.T.); +#85142 = LINE('',#85143,#85144); +#85143 = CARTESIAN_POINT('',(-2.344364749151,-4.4,2.170396404089)); +#85144 = VECTOR('',#85145,1.); +#85145 = DIRECTION('',(0.,-1.,0.)); +#85146 = PLANE('',#85147); +#85147 = AXIS2_PLACEMENT_3D('',#85148,#85149,#85150); +#85148 = CARTESIAN_POINT('',(-1.538718910329,-4.7,3.110316549382)); +#85149 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#85150 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85151 = ADVANCED_FACE('',(#85152),#85179,.F.); +#85152 = FACE_BOUND('',#85153,.T.); +#85153 = EDGE_LOOP('',(#85154,#85155,#85164,#85172)); +#85154 = ORIENTED_EDGE('',*,*,#84977,.T.); +#85155 = ORIENTED_EDGE('',*,*,#85156,.T.); +#85156 = EDGE_CURVE('',#84970,#85157,#85159,.T.); +#85157 = VERTEX_POINT('',#85158); +#85158 = CARTESIAN_POINT('',(-1.25,-3.9,3.219696480666)); +#85159 = CIRCLE('',#85160,0.37); +#85160 = AXIS2_PLACEMENT_3D('',#85161,#85162,#85163); +#85161 = CARTESIAN_POINT('',(-1.235016269382,-3.9,2.85)); +#85162 = DIRECTION('',(0.,1.,0.)); +#85163 = DIRECTION('',(0.,-0.,-1.)); +#85164 = ORIENTED_EDGE('',*,*,#85165,.T.); +#85165 = EDGE_CURVE('',#85157,#85166,#85168,.T.); +#85166 = VERTEX_POINT('',#85167); +#85167 = CARTESIAN_POINT('',(-1.25,-3.9,2.979133604522)); +#85168 = LINE('',#85169,#85170); +#85169 = CARTESIAN_POINT('',(-1.25,-3.9,2.95)); +#85170 = VECTOR('',#85171,1.); +#85171 = DIRECTION('',(-0.,-0.,-1.)); +#85172 = ORIENTED_EDGE('',*,*,#85173,.T.); +#85173 = EDGE_CURVE('',#85166,#84978,#85174,.T.); +#85174 = CIRCLE('',#85175,0.13); +#85175 = AXIS2_PLACEMENT_3D('',#85176,#85177,#85178); +#85176 = CARTESIAN_POINT('',(-1.235016269382,-3.9,2.85)); +#85177 = DIRECTION('',(-0.,-1.,0.)); +#85178 = DIRECTION('',(-0.,0.,-1.)); +#85179 = PLANE('',#85180); +#85180 = AXIS2_PLACEMENT_3D('',#85181,#85182,#85183); +#85181 = CARTESIAN_POINT('',(-1.235016269382,-3.9,3.25)); +#85182 = DIRECTION('',(0.,-1.,0.)); +#85183 = DIRECTION('',(0.,-0.,-1.)); +#85184 = ADVANCED_FACE('',(#85185),#85212,.F.); +#85185 = FACE_BOUND('',#85186,.F.); +#85186 = EDGE_LOOP('',(#85187,#85188,#85195,#85196,#85205)); +#85187 = ORIENTED_EDGE('',*,*,#85018,.F.); +#85188 = ORIENTED_EDGE('',*,*,#85189,.F.); +#85189 = EDGE_CURVE('',#81034,#85019,#85190,.T.); +#85190 = CIRCLE('',#85191,0.1); +#85191 = AXIS2_PLACEMENT_3D('',#85192,#85193,#85194); +#85192 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.85)); +#85193 = DIRECTION('',(0.,-1.,0.)); +#85194 = DIRECTION('',(0.,0.,1.)); +#85195 = ORIENTED_EDGE('',*,*,#81041,.T.); +#85196 = ORIENTED_EDGE('',*,*,#85197,.F.); +#85197 = EDGE_CURVE('',#85198,#81042,#85200,.T.); +#85198 = VERTEX_POINT('',#85199); +#85199 = CARTESIAN_POINT('',(-1.246542216011,-3.93,2.94933354194)); +#85200 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85201,#85202,#85203,#85204), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.156208884524E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85201 = CARTESIAN_POINT('',(-1.246542216011,-3.93,2.94933354194)); +#85202 = CARTESIAN_POINT('',(-1.242713871887,-3.93,2.949777755336)); +#85203 = CARTESIAN_POINT('',(-1.238847773929,-3.929791344444,2.95)); +#85204 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,2.95)); +#85205 = ORIENTED_EDGE('',*,*,#85206,.F.); +#85206 = EDGE_CURVE('',#85011,#85198,#85207,.T.); +#85207 = CIRCLE('',#85208,0.1); +#85208 = AXIS2_PLACEMENT_3D('',#85209,#85210,#85211); +#85209 = CARTESIAN_POINT('',(-1.235016269382,-3.93,2.85)); +#85210 = DIRECTION('',(0.,1.,0.)); +#85211 = DIRECTION('',(0.,-0.,-1.)); +#85212 = CYLINDRICAL_SURFACE('',#85213,0.1); +#85213 = AXIS2_PLACEMENT_3D('',#85214,#85215,#85216); +#85214 = CARTESIAN_POINT('',(-1.235016269382,0.,2.85)); +#85215 = DIRECTION('',(-0.,-1.,0.)); +#85216 = DIRECTION('',(-0.,0.,-1.)); +#85217 = ADVANCED_FACE('',(#85218),#85236,.F.); +#85218 = FACE_BOUND('',#85219,.T.); +#85219 = EDGE_LOOP('',(#85220,#85221,#85228,#85229)); +#85220 = ORIENTED_EDGE('',*,*,#81777,.F.); +#85221 = ORIENTED_EDGE('',*,*,#85222,.T.); +#85222 = EDGE_CURVE('',#81770,#85058,#85223,.T.); +#85223 = CIRCLE('',#85224,0.37); +#85224 = AXIS2_PLACEMENT_3D('',#85225,#85226,#85227); +#85225 = CARTESIAN_POINT('',(-1.235016269382,-4.7,2.85)); +#85226 = DIRECTION('',(0.,-1.,0.)); +#85227 = DIRECTION('',(0.,0.,1.)); +#85228 = ORIENTED_EDGE('',*,*,#85057,.T.); +#85229 = ORIENTED_EDGE('',*,*,#85230,.T.); +#85230 = EDGE_CURVE('',#85060,#81778,#85231,.T.); +#85231 = CIRCLE('',#85232,0.13); +#85232 = AXIS2_PLACEMENT_3D('',#85233,#85234,#85235); +#85233 = CARTESIAN_POINT('',(-1.235016269382,-4.7,2.85)); +#85234 = DIRECTION('',(0.,1.,-0.)); +#85235 = DIRECTION('',(0.,0.,1.)); +#85236 = PLANE('',#85237); +#85237 = AXIS2_PLACEMENT_3D('',#85238,#85239,#85240); +#85238 = CARTESIAN_POINT('',(-1.235016269382,-4.7,3.25)); +#85239 = DIRECTION('',(0.,1.,-0.)); +#85240 = DIRECTION('',(0.,0.,1.)); +#85241 = ADVANCED_FACE('',(#85242),#85269,.T.); +#85242 = FACE_BOUND('',#85243,.T.); +#85243 = EDGE_LOOP('',(#85244,#85245,#85252,#85253,#85262)); +#85244 = ORIENTED_EDGE('',*,*,#85116,.T.); +#85245 = ORIENTED_EDGE('',*,*,#85246,.T.); +#85246 = EDGE_CURVE('',#85109,#82391,#85247,.T.); +#85247 = CIRCLE('',#85248,0.4); +#85248 = AXIS2_PLACEMENT_3D('',#85249,#85250,#85251); +#85249 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.85)); +#85250 = DIRECTION('',(0.,1.,-0.)); +#85251 = DIRECTION('',(0.,0.,1.)); +#85252 = ORIENTED_EDGE('',*,*,#82390,.F.); +#85253 = ORIENTED_EDGE('',*,*,#85254,.T.); +#85254 = EDGE_CURVE('',#82382,#85255,#85257,.T.); +#85255 = VERTEX_POINT('',#85256); +#85256 = CARTESIAN_POINT('',(-1.251214897077,-3.93,3.24967187099)); +#85257 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85258,#85259,#85260,#85261), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.621399069523E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85258 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,3.25)); +#85259 = CARTESIAN_POINT('',(-1.240404871024,-3.92979163686,3.25)); +#85260 = CARTESIAN_POINT('',(-1.245814667079,-3.93,3.249890741322)); +#85261 = CARTESIAN_POINT('',(-1.251214897077,-3.93,3.24967187099)); +#85262 = ORIENTED_EDGE('',*,*,#85263,.T.); +#85263 = EDGE_CURVE('',#85255,#85117,#85264,.T.); +#85264 = CIRCLE('',#85265,0.4); +#85265 = AXIS2_PLACEMENT_3D('',#85266,#85267,#85268); +#85266 = CARTESIAN_POINT('',(-1.235016269382,-3.93,2.85)); +#85267 = DIRECTION('',(-0.,-1.,0.)); +#85268 = DIRECTION('',(-0.,0.,-1.)); +#85269 = CYLINDRICAL_SURFACE('',#85270,0.4); +#85270 = AXIS2_PLACEMENT_3D('',#85271,#85272,#85273); +#85271 = CARTESIAN_POINT('',(-1.235016269382,0.,2.85)); +#85272 = DIRECTION('',(-0.,-1.,0.)); +#85273 = DIRECTION('',(-0.,0.,-1.)); +#85274 = ADVANCED_FACE('',(#85275),#85300,.T.); +#85275 = FACE_BOUND('',#85276,.T.); +#85276 = EDGE_LOOP('',(#85277,#85285,#85293,#85299)); +#85277 = ORIENTED_EDGE('',*,*,#85278,.T.); +#85278 = EDGE_CURVE('',#79601,#85279,#85281,.T.); +#85279 = VERTEX_POINT('',#85280); +#85280 = CARTESIAN_POINT('',(-2.341110792284,-4.4,2.128094964815)); +#85281 = LINE('',#85282,#85283); +#85282 = CARTESIAN_POINT('',(-2.363888490355,-4.4,2.147618706018)); +#85283 = VECTOR('',#85284,1.); +#85284 = DIRECTION('',(-0.759256602365,-0.,0.650791373456)); +#85285 = ORIENTED_EDGE('',*,*,#85286,.T.); +#85286 = EDGE_CURVE('',#85279,#85287,#85289,.T.); +#85287 = VERTEX_POINT('',#85288); +#85288 = CARTESIAN_POINT('',(-2.341110792284,-4.2,2.128094964815)); +#85289 = LINE('',#85290,#85291); +#85290 = CARTESIAN_POINT('',(-2.341110792284,-4.2,2.128094964815)); +#85291 = VECTOR('',#85292,1.); +#85292 = DIRECTION('',(-0.,1.,-0.)); +#85293 = ORIENTED_EDGE('',*,*,#85294,.T.); +#85294 = EDGE_CURVE('',#85287,#79584,#85295,.T.); +#85295 = LINE('',#85296,#85297); +#85296 = CARTESIAN_POINT('',(-2.136111509645,-4.2,1.952381293982)); +#85297 = VECTOR('',#85298,1.); +#85298 = DIRECTION('',(0.759256602365,-0.,-0.650791373456)); +#85299 = ORIENTED_EDGE('',*,*,#79609,.T.); +#85300 = PLANE('',#85301); +#85301 = AXIS2_PLACEMENT_3D('',#85302,#85303,#85304); +#85302 = CARTESIAN_POINT('',(0.103695467332,0.,3.25467422865E-02)); +#85303 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85304 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#85305 = ADVANCED_FACE('',(#85306),#85340,.T.); +#85306 = FACE_BOUND('',#85307,.T.); +#85307 = EDGE_LOOP('',(#85308,#85318,#85326,#85334)); +#85308 = ORIENTED_EDGE('',*,*,#85309,.T.); +#85309 = EDGE_CURVE('',#85310,#85312,#85314,.T.); +#85310 = VERTEX_POINT('',#85311); +#85311 = CARTESIAN_POINT('',(1.963651795679,-4.7,2.199682015895)); +#85312 = VERTEX_POINT('',#85313); +#85313 = CARTESIAN_POINT('',(2.145873380247,-4.7,2.355871945524)); +#85314 = LINE('',#85315,#85316); +#85315 = CARTESIAN_POINT('',(2.168651078318,-4.7,2.375395686728)); +#85316 = VECTOR('',#85317,1.); +#85317 = DIRECTION('',(0.759256602365,-0.,0.650791373456)); +#85318 = ORIENTED_EDGE('',*,*,#85319,.T.); +#85319 = EDGE_CURVE('',#85312,#85320,#85322,.T.); +#85320 = VERTEX_POINT('',#85321); +#85321 = CARTESIAN_POINT('',(1.515941212258,-4.7,3.090792808179)); +#85322 = LINE('',#85323,#85324); +#85323 = CARTESIAN_POINT('',(1.515941212258,-4.7,3.090792808179)); +#85324 = VECTOR('',#85325,1.); +#85325 = DIRECTION('',(-0.650791373456,-0.,0.759256602365)); +#85326 = ORIENTED_EDGE('',*,*,#85327,.T.); +#85327 = EDGE_CURVE('',#85320,#85328,#85330,.T.); +#85328 = VERTEX_POINT('',#85329); +#85329 = CARTESIAN_POINT('',(1.33371962769,-4.7,2.934602878549)); +#85330 = LINE('',#85331,#85332); +#85331 = CARTESIAN_POINT('',(1.538718910329,-4.7,3.110316549382)); +#85332 = VECTOR('',#85333,1.); +#85333 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85334 = ORIENTED_EDGE('',*,*,#85335,.T.); +#85335 = EDGE_CURVE('',#85328,#85310,#85336,.T.); +#85336 = LINE('',#85337,#85338); +#85337 = CARTESIAN_POINT('',(1.33371962769,-4.7,2.934602878549)); +#85338 = VECTOR('',#85339,1.); +#85339 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85340 = PLANE('',#85341); +#85341 = AXIS2_PLACEMENT_3D('',#85342,#85343,#85344); +#85342 = CARTESIAN_POINT('',(1.538718910329,-4.7,3.110316549382)); +#85343 = DIRECTION('',(0.,-1.,0.)); +#85344 = DIRECTION('',(0.,0.,-1.)); +#85345 = ADVANCED_FACE('',(#85346),#85398,.T.); +#85346 = FACE_BOUND('',#85347,.T.); +#85347 = EDGE_LOOP('',(#85348,#85359,#85367,#85375,#85383,#85392)); +#85348 = ORIENTED_EDGE('',*,*,#85349,.T.); +#85349 = EDGE_CURVE('',#85350,#85352,#85354,.T.); +#85350 = VERTEX_POINT('',#85351); +#85351 = CARTESIAN_POINT('',(2.116587768442,-4.4,1.975158992053)); +#85352 = VERTEX_POINT('',#85353); +#85353 = CARTESIAN_POINT('',(1.940874097608,-4.67,2.180158274691)); +#85354 = CIRCLE('',#85355,0.27); +#85355 = AXIS2_PLACEMENT_3D('',#85356,#85357,#85358); +#85356 = CARTESIAN_POINT('',(1.940874097608,-4.4,2.180158274691)); +#85357 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85358 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#85359 = ORIENTED_EDGE('',*,*,#85360,.T.); +#85360 = EDGE_CURVE('',#85352,#85361,#85363,.T.); +#85361 = VERTEX_POINT('',#85362); +#85362 = CARTESIAN_POINT('',(1.310941929619,-4.67,2.915079137346)); +#85363 = LINE('',#85364,#85365); +#85364 = CARTESIAN_POINT('',(1.310941929619,-4.67,2.915079137346)); +#85365 = VECTOR('',#85366,1.); +#85366 = DIRECTION('',(-0.650791373456,-0.,0.759256602365)); +#85367 = ORIENTED_EDGE('',*,*,#85368,.T.); +#85368 = EDGE_CURVE('',#85361,#85369,#85371,.T.); +#85369 = VERTEX_POINT('',#85370); +#85370 = CARTESIAN_POINT('',(1.310941929619,-3.93,2.915079137346)); +#85371 = LINE('',#85372,#85373); +#85372 = CARTESIAN_POINT('',(1.310941929619,-4.7,2.915079137346)); +#85373 = VECTOR('',#85374,1.); +#85374 = DIRECTION('',(0.,1.,0.)); +#85375 = ORIENTED_EDGE('',*,*,#85376,.T.); +#85376 = EDGE_CURVE('',#85369,#85377,#85379,.T.); +#85377 = VERTEX_POINT('',#85378); +#85378 = CARTESIAN_POINT('',(1.940874097608,-3.93,2.180158274691)); +#85379 = LINE('',#85380,#85381); +#85380 = CARTESIAN_POINT('',(1.310941929619,-3.93,2.915079137346)); +#85381 = VECTOR('',#85382,1.); +#85382 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85383 = ORIENTED_EDGE('',*,*,#85384,.T.); +#85384 = EDGE_CURVE('',#85377,#85385,#85387,.T.); +#85385 = VERTEX_POINT('',#85386); +#85386 = CARTESIAN_POINT('',(2.116587768442,-4.2,1.975158992053)); +#85387 = CIRCLE('',#85388,0.27); +#85388 = AXIS2_PLACEMENT_3D('',#85389,#85390,#85391); +#85389 = CARTESIAN_POINT('',(1.940874097608,-4.2,2.180158274691)); +#85390 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85391 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#85392 = ORIENTED_EDGE('',*,*,#85393,.T.); +#85393 = EDGE_CURVE('',#85385,#85350,#85394,.T.); +#85394 = LINE('',#85395,#85396); +#85395 = CARTESIAN_POINT('',(2.116587768442,-4.7,1.975158992053)); +#85396 = VECTOR('',#85397,1.); +#85397 = DIRECTION('',(-0.,-1.,-0.)); +#85398 = PLANE('',#85399); +#85399 = AXIS2_PLACEMENT_3D('',#85400,#85401,#85402); +#85400 = CARTESIAN_POINT('',(1.310941929619,-4.7,2.915079137346)); +#85401 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85402 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#85403 = ADVANCED_FACE('',(#85404),#85438,.T.); +#85404 = FACE_BOUND('',#85405,.T.); +#85405 = EDGE_LOOP('',(#85406,#85416,#85424,#85432)); +#85406 = ORIENTED_EDGE('',*,*,#85407,.T.); +#85407 = EDGE_CURVE('',#85408,#85410,#85412,.T.); +#85408 = VERTEX_POINT('',#85409); +#85409 = CARTESIAN_POINT('',(1.33371962769,-3.9,2.934602878549)); +#85410 = VERTEX_POINT('',#85411); +#85411 = CARTESIAN_POINT('',(1.515941212258,-3.9,3.090792808179)); +#85412 = LINE('',#85413,#85414); +#85413 = CARTESIAN_POINT('',(1.538718910329,-3.9,3.110316549382)); +#85414 = VECTOR('',#85415,1.); +#85415 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85416 = ORIENTED_EDGE('',*,*,#85417,.T.); +#85417 = EDGE_CURVE('',#85410,#85418,#85420,.T.); +#85418 = VERTEX_POINT('',#85419); +#85419 = CARTESIAN_POINT('',(2.145873380247,-3.9,2.355871945524)); +#85420 = LINE('',#85421,#85422); +#85421 = CARTESIAN_POINT('',(1.515941212258,-3.9,3.090792808179)); +#85422 = VECTOR('',#85423,1.); +#85423 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85424 = ORIENTED_EDGE('',*,*,#85425,.T.); +#85425 = EDGE_CURVE('',#85418,#85426,#85428,.T.); +#85426 = VERTEX_POINT('',#85427); +#85427 = CARTESIAN_POINT('',(1.963651795679,-3.9,2.199682015895)); +#85428 = LINE('',#85429,#85430); +#85429 = CARTESIAN_POINT('',(2.168651078318,-3.9,2.375395686728)); +#85430 = VECTOR('',#85431,1.); +#85431 = DIRECTION('',(-0.759256602365,-0.,-0.650791373456)); +#85432 = ORIENTED_EDGE('',*,*,#85433,.T.); +#85433 = EDGE_CURVE('',#85426,#85408,#85434,.T.); +#85434 = LINE('',#85435,#85436); +#85435 = CARTESIAN_POINT('',(1.33371962769,-3.9,2.934602878549)); +#85436 = VECTOR('',#85437,1.); +#85437 = DIRECTION('',(-0.650791373456,-0.,0.759256602365)); +#85438 = PLANE('',#85439); +#85439 = AXIS2_PLACEMENT_3D('',#85440,#85441,#85442); +#85440 = CARTESIAN_POINT('',(1.538718910329,-3.9,3.110316549382)); +#85441 = DIRECTION('',(-0.,1.,0.)); +#85442 = DIRECTION('',(0.,0.,1.)); +#85443 = ADVANCED_FACE('',(#85444),#85496,.T.); +#85444 = FACE_BOUND('',#85445,.T.); +#85445 = EDGE_LOOP('',(#85446,#85457,#85465,#85473,#85481,#85490)); +#85446 = ORIENTED_EDGE('',*,*,#85447,.T.); +#85447 = EDGE_CURVE('',#85448,#85450,#85452,.T.); +#85448 = VERTEX_POINT('',#85449); +#85449 = CARTESIAN_POINT('',(2.344364749151,-4.2,2.170396404089)); +#85450 = VERTEX_POINT('',#85451); +#85451 = CARTESIAN_POINT('',(2.168651078318,-3.93,2.375395686728)); +#85452 = CIRCLE('',#85453,0.27); +#85453 = AXIS2_PLACEMENT_3D('',#85454,#85455,#85456); +#85454 = CARTESIAN_POINT('',(2.168651078318,-4.2,2.375395686728)); +#85455 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85456 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85457 = ORIENTED_EDGE('',*,*,#85458,.T.); +#85458 = EDGE_CURVE('',#85450,#85459,#85461,.T.); +#85459 = VERTEX_POINT('',#85460); +#85460 = CARTESIAN_POINT('',(1.538718910329,-3.93,3.110316549382)); +#85461 = LINE('',#85462,#85463); +#85462 = CARTESIAN_POINT('',(1.538718910329,-3.93,3.110316549382)); +#85463 = VECTOR('',#85464,1.); +#85464 = DIRECTION('',(-0.650791373456,-0.,0.759256602365)); +#85465 = ORIENTED_EDGE('',*,*,#85466,.T.); +#85466 = EDGE_CURVE('',#85459,#85467,#85469,.T.); +#85467 = VERTEX_POINT('',#85468); +#85468 = CARTESIAN_POINT('',(1.538718910329,-4.67,3.110316549382)); +#85469 = LINE('',#85470,#85471); +#85470 = CARTESIAN_POINT('',(1.538718910329,-4.7,3.110316549382)); +#85471 = VECTOR('',#85472,1.); +#85472 = DIRECTION('',(0.,-1.,0.)); +#85473 = ORIENTED_EDGE('',*,*,#85474,.T.); +#85474 = EDGE_CURVE('',#85467,#85475,#85477,.T.); +#85475 = VERTEX_POINT('',#85476); +#85476 = CARTESIAN_POINT('',(2.168651078318,-4.67,2.375395686728)); +#85477 = LINE('',#85478,#85479); +#85478 = CARTESIAN_POINT('',(1.538718910329,-4.67,3.110316549382)); +#85479 = VECTOR('',#85480,1.); +#85480 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85481 = ORIENTED_EDGE('',*,*,#85482,.T.); +#85482 = EDGE_CURVE('',#85475,#85483,#85485,.T.); +#85483 = VERTEX_POINT('',#85484); +#85484 = CARTESIAN_POINT('',(2.344364749151,-4.4,2.170396404089)); +#85485 = CIRCLE('',#85486,0.27); +#85486 = AXIS2_PLACEMENT_3D('',#85487,#85488,#85489); +#85487 = CARTESIAN_POINT('',(2.168651078318,-4.4,2.375395686728)); +#85488 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85489 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85490 = ORIENTED_EDGE('',*,*,#85491,.T.); +#85491 = EDGE_CURVE('',#85483,#85448,#85492,.T.); +#85492 = LINE('',#85493,#85494); +#85493 = CARTESIAN_POINT('',(2.344364749151,-4.7,2.170396404089)); +#85494 = VECTOR('',#85495,1.); +#85495 = DIRECTION('',(-0.,1.,-0.)); +#85496 = PLANE('',#85497); +#85497 = AXIS2_PLACEMENT_3D('',#85498,#85499,#85500); +#85498 = CARTESIAN_POINT('',(1.538718910329,-4.7,3.110316549382)); +#85499 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85500 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85501 = ADVANCED_FACE('',(#85502),#85520,.T.); +#85502 = FACE_BOUND('',#85503,.T.); +#85503 = EDGE_LOOP('',(#85504,#85505,#85512,#85513)); +#85504 = ORIENTED_EDGE('',*,*,#85327,.F.); +#85505 = ORIENTED_EDGE('',*,*,#85506,.T.); +#85506 = EDGE_CURVE('',#85320,#81760,#85507,.T.); +#85507 = CIRCLE('',#85508,0.37); +#85508 = AXIS2_PLACEMENT_3D('',#85509,#85510,#85511); +#85509 = CARTESIAN_POINT('',(1.235016269382,-4.7,2.85)); +#85510 = DIRECTION('',(0.,-1.,0.)); +#85511 = DIRECTION('',(0.,0.,-1.)); +#85512 = ORIENTED_EDGE('',*,*,#81759,.T.); +#85513 = ORIENTED_EDGE('',*,*,#85514,.T.); +#85514 = EDGE_CURVE('',#81762,#85328,#85515,.T.); +#85515 = CIRCLE('',#85516,0.13); +#85516 = AXIS2_PLACEMENT_3D('',#85517,#85518,#85519); +#85517 = CARTESIAN_POINT('',(1.235016269382,-4.7,2.85)); +#85518 = DIRECTION('',(-0.,1.,0.)); +#85519 = DIRECTION('',(1.668003342285E-15,0.,-1.)); +#85520 = PLANE('',#85521); +#85521 = AXIS2_PLACEMENT_3D('',#85522,#85523,#85524); +#85522 = CARTESIAN_POINT('',(1.235016269382,-4.7,3.25)); +#85523 = DIRECTION('',(0.,-1.,0.)); +#85524 = DIRECTION('',(0.,-0.,-1.)); +#85525 = ADVANCED_FACE('',(#85526),#85553,.F.); +#85526 = FACE_BOUND('',#85527,.F.); +#85527 = EDGE_LOOP('',(#85528,#85537,#85544,#85545,#85552)); +#85528 = ORIENTED_EDGE('',*,*,#85529,.F.); +#85529 = EDGE_CURVE('',#85530,#85369,#85532,.T.); +#85530 = VERTEX_POINT('',#85531); +#85531 = CARTESIAN_POINT('',(1.246542216011,-3.93,2.94933354194)); +#85532 = CIRCLE('',#85533,0.1); +#85533 = AXIS2_PLACEMENT_3D('',#85534,#85535,#85536); +#85534 = CARTESIAN_POINT('',(1.235016269382,-3.93,2.85)); +#85535 = DIRECTION('',(-0.,1.,0.)); +#85536 = DIRECTION('',(0.,0.,1.)); +#85537 = ORIENTED_EDGE('',*,*,#85538,.F.); +#85538 = EDGE_CURVE('',#81075,#85530,#85539,.T.); +#85539 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85540,#85541,#85542,#85543), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.156208884538E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85540 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,2.95)); +#85541 = CARTESIAN_POINT('',(1.23884777393,-3.929791344444,2.95)); +#85542 = CARTESIAN_POINT('',(1.242713871887,-3.93,2.949777755336)); +#85543 = CARTESIAN_POINT('',(1.246542216011,-3.93,2.94933354194)); +#85544 = ORIENTED_EDGE('',*,*,#81083,.F.); +#85545 = ORIENTED_EDGE('',*,*,#85546,.F.); +#85546 = EDGE_CURVE('',#85361,#81084,#85547,.T.); +#85547 = CIRCLE('',#85548,0.1); +#85548 = AXIS2_PLACEMENT_3D('',#85549,#85550,#85551); +#85549 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.85)); +#85550 = DIRECTION('',(0.,-1.,0.)); +#85551 = DIRECTION('',(0.,0.,-1.)); +#85552 = ORIENTED_EDGE('',*,*,#85368,.T.); +#85553 = CYLINDRICAL_SURFACE('',#85554,0.1); +#85554 = AXIS2_PLACEMENT_3D('',#85555,#85556,#85557); +#85555 = CARTESIAN_POINT('',(1.235016269382,0.,2.85)); +#85556 = DIRECTION('',(-0.,1.,-0.)); +#85557 = DIRECTION('',(0.,0.,1.)); +#85558 = ADVANCED_FACE('',(#85559),#85586,.T.); +#85559 = FACE_BOUND('',#85560,.T.); +#85560 = EDGE_LOOP('',(#85561,#85571,#85578,#85579)); +#85561 = ORIENTED_EDGE('',*,*,#85562,.T.); +#85562 = EDGE_CURVE('',#85563,#85565,#85567,.T.); +#85563 = VERTEX_POINT('',#85564); +#85564 = CARTESIAN_POINT('',(1.25,-3.9,2.979133604522)); +#85565 = VERTEX_POINT('',#85566); +#85566 = CARTESIAN_POINT('',(1.25,-3.9,3.219696480666)); +#85567 = LINE('',#85568,#85569); +#85568 = CARTESIAN_POINT('',(1.25,-3.9,3.25)); +#85569 = VECTOR('',#85570,1.); +#85570 = DIRECTION('',(0.,0.,1.)); +#85571 = ORIENTED_EDGE('',*,*,#85572,.T.); +#85572 = EDGE_CURVE('',#85565,#85410,#85573,.T.); +#85573 = CIRCLE('',#85574,0.37); +#85574 = AXIS2_PLACEMENT_3D('',#85575,#85576,#85577); +#85575 = CARTESIAN_POINT('',(1.235016269382,-3.9,2.85)); +#85576 = DIRECTION('',(-0.,1.,0.)); +#85577 = DIRECTION('',(0.,0.,1.)); +#85578 = ORIENTED_EDGE('',*,*,#85407,.F.); +#85579 = ORIENTED_EDGE('',*,*,#85580,.T.); +#85580 = EDGE_CURVE('',#85408,#85563,#85581,.T.); +#85581 = CIRCLE('',#85582,0.13); +#85582 = AXIS2_PLACEMENT_3D('',#85583,#85584,#85585); +#85583 = CARTESIAN_POINT('',(1.235016269382,-3.9,2.85)); +#85584 = DIRECTION('',(0.,-1.,0.)); +#85585 = DIRECTION('',(8.340016711427E-15,0.,1.)); +#85586 = PLANE('',#85587); +#85587 = AXIS2_PLACEMENT_3D('',#85588,#85589,#85590); +#85588 = CARTESIAN_POINT('',(1.235016269382,-3.9,3.25)); +#85589 = DIRECTION('',(-0.,1.,0.)); +#85590 = DIRECTION('',(0.,0.,1.)); +#85591 = ADVANCED_FACE('',(#85592),#85619,.T.); +#85592 = FACE_BOUND('',#85593,.T.); +#85593 = EDGE_LOOP('',(#85594,#85603,#85610,#85611,#85618)); +#85594 = ORIENTED_EDGE('',*,*,#85595,.T.); +#85595 = EDGE_CURVE('',#85459,#85596,#85598,.T.); +#85596 = VERTEX_POINT('',#85597); +#85597 = CARTESIAN_POINT('',(1.251214897077,-3.93,3.24967187099)); +#85598 = CIRCLE('',#85599,0.4); +#85599 = AXIS2_PLACEMENT_3D('',#85600,#85601,#85602); +#85600 = CARTESIAN_POINT('',(1.235016269382,-3.93,2.85)); +#85601 = DIRECTION('',(0.,-1.,0.)); +#85602 = DIRECTION('',(0.,0.,1.)); +#85603 = ORIENTED_EDGE('',*,*,#85604,.T.); +#85604 = EDGE_CURVE('',#85596,#82407,#85605,.T.); +#85605 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85606,#85607,#85608,#85609), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.621399069523E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85606 = CARTESIAN_POINT('',(1.251214897077,-3.93,3.24967187099)); +#85607 = CARTESIAN_POINT('',(1.245814667079,-3.93,3.249890741322)); +#85608 = CARTESIAN_POINT('',(1.240404871024,-3.92979163686,3.25)); +#85609 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,3.25)); +#85610 = ORIENTED_EDGE('',*,*,#82406,.T.); +#85611 = ORIENTED_EDGE('',*,*,#85612,.T.); +#85612 = EDGE_CURVE('',#82399,#85467,#85613,.T.); +#85613 = CIRCLE('',#85614,0.4); +#85614 = AXIS2_PLACEMENT_3D('',#85615,#85616,#85617); +#85615 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.85)); +#85616 = DIRECTION('',(-0.,1.,0.)); +#85617 = DIRECTION('',(0.,0.,-1.)); +#85618 = ORIENTED_EDGE('',*,*,#85466,.F.); +#85619 = CYLINDRICAL_SURFACE('',#85620,0.4); +#85620 = AXIS2_PLACEMENT_3D('',#85621,#85622,#85623); +#85621 = CARTESIAN_POINT('',(1.235016269382,0.,2.85)); +#85622 = DIRECTION('',(-0.,1.,-0.)); +#85623 = DIRECTION('',(0.,0.,1.)); +#85624 = ADVANCED_FACE('',(#85625),#85659,.T.); +#85625 = FACE_BOUND('',#85626,.T.); +#85626 = EDGE_LOOP('',(#85627,#85637,#85645,#85653)); +#85627 = ORIENTED_EDGE('',*,*,#85628,.T.); +#85628 = EDGE_CURVE('',#85629,#85631,#85633,.T.); +#85629 = VERTEX_POINT('',#85630); +#85630 = CARTESIAN_POINT('',(2.158889207716,-4.2,1.971905035185)); +#85631 = VERTEX_POINT('',#85632); +#85632 = CARTESIAN_POINT('',(2.341110792284,-4.2,2.128094964815)); +#85633 = LINE('',#85634,#85635); +#85634 = CARTESIAN_POINT('',(-0.103695467332,-4.2,3.25467422865E-02)); +#85635 = VECTOR('',#85636,1.); +#85636 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85637 = ORIENTED_EDGE('',*,*,#85638,.T.); +#85638 = EDGE_CURVE('',#85631,#85639,#85641,.T.); +#85639 = VERTEX_POINT('',#85640); +#85640 = CARTESIAN_POINT('',(2.341110792284,-4.4,2.128094964815)); +#85641 = LINE('',#85642,#85643); +#85642 = CARTESIAN_POINT('',(2.341110792284,0.,2.128094964815)); +#85643 = VECTOR('',#85644,1.); +#85644 = DIRECTION('',(0.,-1.,0.)); +#85645 = ORIENTED_EDGE('',*,*,#85646,.T.); +#85646 = EDGE_CURVE('',#85639,#85647,#85649,.T.); +#85647 = VERTEX_POINT('',#85648); +#85648 = CARTESIAN_POINT('',(2.158889207716,-4.4,1.971905035185)); +#85649 = LINE('',#85650,#85651); +#85650 = CARTESIAN_POINT('',(-0.103695467332,-4.4,3.25467422865E-02)); +#85651 = VECTOR('',#85652,1.); +#85652 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85653 = ORIENTED_EDGE('',*,*,#85654,.T.); +#85654 = EDGE_CURVE('',#85647,#85629,#85655,.T.); +#85655 = LINE('',#85656,#85657); +#85656 = CARTESIAN_POINT('',(2.158889207716,0.,1.971905035185)); +#85657 = VECTOR('',#85658,1.); +#85658 = DIRECTION('',(0.,1.,0.)); +#85659 = PLANE('',#85660); +#85660 = AXIS2_PLACEMENT_3D('',#85661,#85662,#85663); +#85661 = CARTESIAN_POINT('',(-0.103695467332,0.,3.25467422865E-02)); +#85662 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85663 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85664 = ADVANCED_FACE('',(#85665),#85683,.T.); +#85665 = FACE_BOUND('',#85666,.T.); +#85666 = EDGE_LOOP('',(#85667,#85668,#85675,#85676)); +#85667 = ORIENTED_EDGE('',*,*,#82045,.F.); +#85668 = ORIENTED_EDGE('',*,*,#85669,.T.); +#85669 = EDGE_CURVE('',#82038,#84922,#85670,.T.); +#85670 = CIRCLE('',#85671,0.15); +#85671 = AXIS2_PLACEMENT_3D('',#85672,#85673,#85674); +#85672 = CARTESIAN_POINT('',(3.25,-4.55,3.22)); +#85673 = DIRECTION('',(0.,0.,-1.)); +#85674 = DIRECTION('',(-1.,0.,0.)); +#85675 = ORIENTED_EDGE('',*,*,#84919,.F.); +#85676 = ORIENTED_EDGE('',*,*,#85677,.T.); +#85677 = EDGE_CURVE('',#84920,#82046,#85678,.T.); +#85678 = CIRCLE('',#85679,0.15); +#85679 = AXIS2_PLACEMENT_3D('',#85680,#85681,#85682); +#85680 = CARTESIAN_POINT('',(3.25,-4.55,2.98)); +#85681 = DIRECTION('',(0.,-0.,1.)); +#85682 = DIRECTION('',(1.,0.,0.)); +#85683 = CYLINDRICAL_SURFACE('',#85684,0.15); +#85684 = AXIS2_PLACEMENT_3D('',#85685,#85686,#85687); +#85685 = CARTESIAN_POINT('',(3.25,-4.55,-0.851)); +#85686 = DIRECTION('',(-0.,0.,1.)); +#85687 = DIRECTION('',(1.,0.,0.)); +#85688 = ADVANCED_FACE('',(#85689),#85707,.T.); +#85689 = FACE_BOUND('',#85690,.T.); +#85690 = EDGE_LOOP('',(#85691,#85692,#85699,#85700)); +#85691 = ORIENTED_EDGE('',*,*,#84817,.F.); +#85692 = ORIENTED_EDGE('',*,*,#85693,.T.); +#85693 = EDGE_CURVE('',#84810,#81802,#85694,.T.); +#85694 = CIRCLE('',#85695,0.15); +#85695 = AXIS2_PLACEMENT_3D('',#85696,#85697,#85698); +#85696 = CARTESIAN_POINT('',(-3.25,-4.55,3.22)); +#85697 = DIRECTION('',(0.,0.,-1.)); +#85698 = DIRECTION('',(-1.,0.,0.)); +#85699 = ORIENTED_EDGE('',*,*,#81799,.F.); +#85700 = ORIENTED_EDGE('',*,*,#85701,.T.); +#85701 = EDGE_CURVE('',#81800,#84818,#85702,.T.); +#85702 = CIRCLE('',#85703,0.15); +#85703 = AXIS2_PLACEMENT_3D('',#85704,#85705,#85706); +#85704 = CARTESIAN_POINT('',(-3.25,-4.55,2.98)); +#85705 = DIRECTION('',(0.,-0.,1.)); +#85706 = DIRECTION('',(1.,0.,0.)); +#85707 = CYLINDRICAL_SURFACE('',#85708,0.15); +#85708 = AXIS2_PLACEMENT_3D('',#85709,#85710,#85711); +#85709 = CARTESIAN_POINT('',(-3.25,-4.55,3.25)); +#85710 = DIRECTION('',(0.,-0.,1.)); +#85711 = DIRECTION('',(1.,0.,0.)); +#85712 = ADVANCED_FACE('',(#85713),#85731,.F.); +#85713 = FACE_BOUND('',#85714,.F.); +#85714 = EDGE_LOOP('',(#85715,#85722,#85723,#85730)); +#85715 = ORIENTED_EDGE('',*,*,#85716,.F.); +#85716 = EDGE_CURVE('',#84800,#84858,#85717,.T.); +#85717 = CIRCLE('',#85718,0.15); +#85718 = AXIS2_PLACEMENT_3D('',#85719,#85720,#85721); +#85719 = CARTESIAN_POINT('',(-2.95,-3.75,2.98)); +#85720 = DIRECTION('',(0.,0.,-1.)); +#85721 = DIRECTION('',(1.,0.,0.)); +#85722 = ORIENTED_EDGE('',*,*,#84799,.T.); +#85723 = ORIENTED_EDGE('',*,*,#85724,.F.); +#85724 = EDGE_CURVE('',#84850,#84802,#85725,.T.); +#85725 = CIRCLE('',#85726,0.15); +#85726 = AXIS2_PLACEMENT_3D('',#85727,#85728,#85729); +#85727 = CARTESIAN_POINT('',(-2.95,-3.75,3.22)); +#85728 = DIRECTION('',(0.,-0.,1.)); +#85729 = DIRECTION('',(-1.,0.,0.)); +#85730 = ORIENTED_EDGE('',*,*,#84857,.T.); +#85731 = CYLINDRICAL_SURFACE('',#85732,0.15); +#85732 = AXIS2_PLACEMENT_3D('',#85733,#85734,#85735); +#85733 = CARTESIAN_POINT('',(-2.95,-3.75,-0.851)); +#85734 = DIRECTION('',(0.,0.,-1.)); +#85735 = DIRECTION('',(-1.,0.,0.)); +#85736 = ADVANCED_FACE('',(#85737),#85755,.F.); +#85737 = FACE_BOUND('',#85738,.F.); +#85738 = EDGE_LOOP('',(#85739,#85746,#85747,#85754)); +#85739 = ORIENTED_EDGE('',*,*,#85740,.F.); +#85740 = EDGE_CURVE('',#84880,#84938,#85741,.T.); +#85741 = CIRCLE('',#85742,0.15); +#85742 = AXIS2_PLACEMENT_3D('',#85743,#85744,#85745); +#85743 = CARTESIAN_POINT('',(2.95,-3.75,2.98)); +#85744 = DIRECTION('',(0.,0.,-1.)); +#85745 = DIRECTION('',(1.,0.,0.)); +#85746 = ORIENTED_EDGE('',*,*,#84879,.T.); +#85747 = ORIENTED_EDGE('',*,*,#85748,.F.); +#85748 = EDGE_CURVE('',#84930,#84882,#85749,.T.); +#85749 = CIRCLE('',#85750,0.15); +#85750 = AXIS2_PLACEMENT_3D('',#85751,#85752,#85753); +#85751 = CARTESIAN_POINT('',(2.95,-3.75,3.22)); +#85752 = DIRECTION('',(0.,-0.,1.)); +#85753 = DIRECTION('',(-1.,0.,0.)); +#85754 = ORIENTED_EDGE('',*,*,#84937,.T.); +#85755 = CYLINDRICAL_SURFACE('',#85756,0.15); +#85756 = AXIS2_PLACEMENT_3D('',#85757,#85758,#85759); +#85757 = CARTESIAN_POINT('',(2.95,-3.75,-0.851)); +#85758 = DIRECTION('',(0.,0.,-1.)); +#85759 = DIRECTION('',(-1.,0.,0.)); +#85760 = ADVANCED_FACE('',(#85761),#85788,.F.); +#85761 = FACE_BOUND('',#85762,.F.); +#85762 = EDGE_LOOP('',(#85763,#85772,#85780,#85787)); +#85763 = ORIENTED_EDGE('',*,*,#85764,.F.); +#85764 = EDGE_CURVE('',#85765,#84898,#85767,.T.); +#85765 = VERTEX_POINT('',#85766); +#85766 = CARTESIAN_POINT('',(1.1,-3.75,2.98)); +#85767 = CIRCLE('',#85768,0.15); +#85768 = AXIS2_PLACEMENT_3D('',#85769,#85770,#85771); +#85769 = CARTESIAN_POINT('',(1.25,-3.75,2.98)); +#85770 = DIRECTION('',(0.,0.,-1.)); +#85771 = DIRECTION('',(1.,0.,0.)); +#85772 = ORIENTED_EDGE('',*,*,#85773,.T.); +#85773 = EDGE_CURVE('',#85765,#85774,#85776,.T.); +#85774 = VERTEX_POINT('',#85775); +#85775 = CARTESIAN_POINT('',(1.1,-3.75,3.22)); +#85776 = LINE('',#85777,#85778); +#85777 = CARTESIAN_POINT('',(1.1,-3.75,3.25)); +#85778 = VECTOR('',#85779,1.); +#85779 = DIRECTION('',(0.,-0.,1.)); +#85780 = ORIENTED_EDGE('',*,*,#85781,.F.); +#85781 = EDGE_CURVE('',#84890,#85774,#85782,.T.); +#85782 = CIRCLE('',#85783,0.15); +#85783 = AXIS2_PLACEMENT_3D('',#85784,#85785,#85786); +#85784 = CARTESIAN_POINT('',(1.25,-3.75,3.22)); +#85785 = DIRECTION('',(0.,-0.,1.)); +#85786 = DIRECTION('',(-1.,0.,0.)); +#85787 = ORIENTED_EDGE('',*,*,#84897,.T.); +#85788 = CYLINDRICAL_SURFACE('',#85789,0.15); +#85789 = AXIS2_PLACEMENT_3D('',#85790,#85791,#85792); +#85790 = CARTESIAN_POINT('',(1.25,-3.75,-0.851)); +#85791 = DIRECTION('',(0.,0.,-1.)); +#85792 = DIRECTION('',(-1.,0.,0.)); +#85793 = ADVANCED_FACE('',(#85794),#85830,.F.); +#85794 = FACE_BOUND('',#85795,.F.); +#85795 = EDGE_LOOP('',(#85796,#85805,#85812,#85813,#85822,#85829)); +#85796 = ORIENTED_EDGE('',*,*,#85797,.F.); +#85797 = EDGE_CURVE('',#85798,#85765,#85800,.T.); +#85798 = VERTEX_POINT('',#85799); +#85799 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,2.98)); +#85800 = CIRCLE('',#85801,0.15); +#85801 = AXIS2_PLACEMENT_3D('',#85802,#85803,#85804); +#85802 = CARTESIAN_POINT('',(1.25,-3.75,2.98)); +#85803 = DIRECTION('',(0.,0.,-1.)); +#85804 = DIRECTION('',(1.,0.,0.)); +#85805 = ORIENTED_EDGE('',*,*,#85806,.F.); +#85806 = EDGE_CURVE('',#85563,#85798,#85807,.T.); +#85807 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85808,#85809,#85810,#85811), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.894764819331E-16,1.252728668618E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85808 = CARTESIAN_POINT('',(1.25,-3.9,2.979133604522)); +#85809 = CARTESIAN_POINT('',(1.245864137516,-3.9,2.979709479248)); +#85810 = CARTESIAN_POINT('',(1.241674827158,-3.899826995189,2.98)); +#85811 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,2.98)); +#85812 = ORIENTED_EDGE('',*,*,#85562,.T.); +#85813 = ORIENTED_EDGE('',*,*,#85814,.F.); +#85814 = EDGE_CURVE('',#85815,#85565,#85817,.T.); +#85815 = VERTEX_POINT('',#85816); +#85816 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,3.22)); +#85817 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85818,#85819,#85820,#85821), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.250097574489E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85818 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,3.22)); +#85819 = CARTESIAN_POINT('',(1.241666087283,-3.899826265122,3.22)); +#85820 = CARTESIAN_POINT('',(1.245837927742,-3.9,3.219898906297)); +#85821 = CARTESIAN_POINT('',(1.25,-3.9,3.219696480666)); +#85822 = ORIENTED_EDGE('',*,*,#85823,.F.); +#85823 = EDGE_CURVE('',#85774,#85815,#85824,.T.); +#85824 = CIRCLE('',#85825,0.15); +#85825 = AXIS2_PLACEMENT_3D('',#85826,#85827,#85828); +#85826 = CARTESIAN_POINT('',(1.25,-3.75,3.22)); +#85827 = DIRECTION('',(-0.,0.,1.)); +#85828 = DIRECTION('',(-1.,-2.891205793295E-15,-0.)); +#85829 = ORIENTED_EDGE('',*,*,#85773,.F.); +#85830 = CYLINDRICAL_SURFACE('',#85831,0.15); +#85831 = AXIS2_PLACEMENT_3D('',#85832,#85833,#85834); +#85832 = CARTESIAN_POINT('',(1.25,-3.75,3.25)); +#85833 = DIRECTION('',(0.,0.,1.)); +#85834 = DIRECTION('',(1.,0.,-0.)); +#85835 = ADVANCED_FACE('',(#85836),#85863,.F.); +#85836 = FACE_BOUND('',#85837,.F.); +#85837 = EDGE_LOOP('',(#85838,#85847,#85848,#85857)); +#85838 = ORIENTED_EDGE('',*,*,#85839,.F.); +#85839 = EDGE_CURVE('',#84840,#85840,#85842,.T.); +#85840 = VERTEX_POINT('',#85841); +#85841 = CARTESIAN_POINT('',(-1.1,-3.75,2.98)); +#85842 = CIRCLE('',#85843,0.15); +#85843 = AXIS2_PLACEMENT_3D('',#85844,#85845,#85846); +#85844 = CARTESIAN_POINT('',(-1.25,-3.75,2.98)); +#85845 = DIRECTION('',(0.,0.,-1.)); +#85846 = DIRECTION('',(1.,0.,0.)); +#85847 = ORIENTED_EDGE('',*,*,#84839,.T.); +#85848 = ORIENTED_EDGE('',*,*,#85849,.F.); +#85849 = EDGE_CURVE('',#85850,#84842,#85852,.T.); +#85850 = VERTEX_POINT('',#85851); +#85851 = CARTESIAN_POINT('',(-1.1,-3.75,3.22)); +#85852 = CIRCLE('',#85853,0.15); +#85853 = AXIS2_PLACEMENT_3D('',#85854,#85855,#85856); +#85854 = CARTESIAN_POINT('',(-1.25,-3.75,3.22)); +#85855 = DIRECTION('',(0.,-0.,1.)); +#85856 = DIRECTION('',(-1.,0.,0.)); +#85857 = ORIENTED_EDGE('',*,*,#85858,.T.); +#85858 = EDGE_CURVE('',#85850,#85840,#85859,.T.); +#85859 = LINE('',#85860,#85861); +#85860 = CARTESIAN_POINT('',(-1.1,-3.75,2.95)); +#85861 = VECTOR('',#85862,1.); +#85862 = DIRECTION('',(0.,-0.,-1.)); +#85863 = CYLINDRICAL_SURFACE('',#85864,0.15); +#85864 = AXIS2_PLACEMENT_3D('',#85865,#85866,#85867); +#85865 = CARTESIAN_POINT('',(-1.25,-3.75,-0.851)); +#85866 = DIRECTION('',(0.,0.,-1.)); +#85867 = DIRECTION('',(-1.,0.,0.)); +#85868 = ADVANCED_FACE('',(#85869),#85905,.F.); +#85869 = FACE_BOUND('',#85870,.F.); +#85870 = EDGE_LOOP('',(#85871,#85880,#85887,#85888,#85897,#85904)); +#85871 = ORIENTED_EDGE('',*,*,#85872,.F.); +#85872 = EDGE_CURVE('',#85873,#85166,#85875,.T.); +#85873 = VERTEX_POINT('',#85874); +#85874 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,2.98)); +#85875 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85876,#85877,#85878,#85879), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.252728668599E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85876 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,2.98)); +#85877 = CARTESIAN_POINT('',(-1.241674827158,-3.899826995189,2.98)); +#85878 = CARTESIAN_POINT('',(-1.245864137516,-3.9,2.979709479248)); +#85879 = CARTESIAN_POINT('',(-1.25,-3.9,2.979133604522)); +#85880 = ORIENTED_EDGE('',*,*,#85881,.F.); +#85881 = EDGE_CURVE('',#85840,#85873,#85882,.T.); +#85882 = CIRCLE('',#85883,0.15); +#85883 = AXIS2_PLACEMENT_3D('',#85884,#85885,#85886); +#85884 = CARTESIAN_POINT('',(-1.25,-3.75,2.98)); +#85885 = DIRECTION('',(0.,0.,-1.)); +#85886 = DIRECTION('',(1.,0.,0.)); +#85887 = ORIENTED_EDGE('',*,*,#85858,.F.); +#85888 = ORIENTED_EDGE('',*,*,#85889,.F.); +#85889 = EDGE_CURVE('',#85890,#85850,#85892,.T.); +#85890 = VERTEX_POINT('',#85891); +#85891 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,3.22)); +#85892 = CIRCLE('',#85893,0.15); +#85893 = AXIS2_PLACEMENT_3D('',#85894,#85895,#85896); +#85894 = CARTESIAN_POINT('',(-1.25,-3.75,3.22)); +#85895 = DIRECTION('',(0.,-0.,1.)); +#85896 = DIRECTION('',(-1.,0.,0.)); +#85897 = ORIENTED_EDGE('',*,*,#85898,.F.); +#85898 = EDGE_CURVE('',#85157,#85890,#85899,.T.); +#85899 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#85900,#85901,#85902,#85903), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.25009757449E-05), + .PIECEWISE_BEZIER_KNOTS.); +#85900 = CARTESIAN_POINT('',(-1.25,-3.9,3.219696480666)); +#85901 = CARTESIAN_POINT('',(-1.245837927742,-3.9,3.219898906297)); +#85902 = CARTESIAN_POINT('',(-1.241666087283,-3.899826265122,3.22)); +#85903 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,3.22)); +#85904 = ORIENTED_EDGE('',*,*,#85165,.T.); +#85905 = CYLINDRICAL_SURFACE('',#85906,0.15); +#85906 = AXIS2_PLACEMENT_3D('',#85907,#85908,#85909); +#85907 = CARTESIAN_POINT('',(-1.25,-3.75,-0.851)); +#85908 = DIRECTION('',(0.,0.,-1.)); +#85909 = DIRECTION('',(-1.,0.,0.)); +#85910 = ADVANCED_FACE('',(#85911),#85929,.T.); +#85911 = FACE_BOUND('',#85912,.T.); +#85912 = EDGE_LOOP('',(#85913,#85914,#85921,#85922)); +#85913 = ORIENTED_EDGE('',*,*,#85425,.F.); +#85914 = ORIENTED_EDGE('',*,*,#85915,.T.); +#85915 = EDGE_CURVE('',#85418,#85631,#85916,.T.); +#85916 = CIRCLE('',#85917,0.3); +#85917 = AXIS2_PLACEMENT_3D('',#85918,#85919,#85920); +#85918 = CARTESIAN_POINT('',(2.145873380247,-4.2,2.355871945524)); +#85919 = DIRECTION('',(-0.759256602365,2.366877415854E-31, + -0.650791373456)); +#85920 = DIRECTION('',(0.650791373456,5.782411586589E-15,-0.759256602365 + )); +#85921 = ORIENTED_EDGE('',*,*,#85628,.F.); +#85922 = ORIENTED_EDGE('',*,*,#85923,.T.); +#85923 = EDGE_CURVE('',#85629,#85426,#85924,.T.); +#85924 = CIRCLE('',#85925,0.3); +#85925 = AXIS2_PLACEMENT_3D('',#85926,#85927,#85928); +#85926 = CARTESIAN_POINT('',(1.963651795679,-4.2,2.199682015895)); +#85927 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85928 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#85929 = CYLINDRICAL_SURFACE('',#85930,0.3); +#85930 = AXIS2_PLACEMENT_3D('',#85931,#85932,#85933); +#85931 = CARTESIAN_POINT('',(-0.298932879369,-4.2,0.260323722996)); +#85932 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#85933 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85934 = ADVANCED_FACE('',(#85935),#85953,.T.); +#85935 = FACE_BOUND('',#85936,.T.); +#85936 = EDGE_LOOP('',(#85937,#85938,#85945,#85946)); +#85937 = ORIENTED_EDGE('',*,*,#85646,.F.); +#85938 = ORIENTED_EDGE('',*,*,#85939,.T.); +#85939 = EDGE_CURVE('',#85639,#85312,#85940,.T.); +#85940 = CIRCLE('',#85941,0.3); +#85941 = AXIS2_PLACEMENT_3D('',#85942,#85943,#85944); +#85942 = CARTESIAN_POINT('',(2.145873380247,-4.4,2.355871945524)); +#85943 = DIRECTION('',(-0.759256602365,-0.,-0.650791373456)); +#85944 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#85945 = ORIENTED_EDGE('',*,*,#85309,.F.); +#85946 = ORIENTED_EDGE('',*,*,#85947,.T.); +#85947 = EDGE_CURVE('',#85310,#85647,#85948,.T.); +#85948 = CIRCLE('',#85949,0.3); +#85949 = AXIS2_PLACEMENT_3D('',#85950,#85951,#85952); +#85950 = CARTESIAN_POINT('',(1.963651795679,-4.4,2.199682015895)); +#85951 = DIRECTION('',(0.759256602365,1.183438707927E-31,0.650791373456) + ); +#85952 = DIRECTION('',(-0.650791373456,2.891205793295E-15,0.759256602365 + )); +#85953 = CYLINDRICAL_SURFACE('',#85954,0.3); +#85954 = AXIS2_PLACEMENT_3D('',#85955,#85956,#85957); +#85955 = CARTESIAN_POINT('',(-0.298932879369,-4.4,0.260323722996)); +#85956 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#85957 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#85958 = ADVANCED_FACE('',(#85959),#85977,.T.); +#85959 = FACE_BOUND('',#85960,.T.); +#85960 = EDGE_LOOP('',(#85961,#85962,#85969,#85970)); +#85961 = ORIENTED_EDGE('',*,*,#85075,.F.); +#85962 = ORIENTED_EDGE('',*,*,#85963,.T.); +#85963 = EDGE_CURVE('',#85068,#85279,#85964,.T.); +#85964 = CIRCLE('',#85965,0.3); +#85965 = AXIS2_PLACEMENT_3D('',#85966,#85967,#85968); +#85966 = CARTESIAN_POINT('',(-2.145873380247,-4.4,2.355871945524)); +#85967 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#85968 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85969 = ORIENTED_EDGE('',*,*,#85278,.F.); +#85970 = ORIENTED_EDGE('',*,*,#85971,.T.); +#85971 = EDGE_CURVE('',#79601,#85076,#85972,.T.); +#85972 = CIRCLE('',#85973,0.3); +#85973 = AXIS2_PLACEMENT_3D('',#85974,#85975,#85976); +#85974 = CARTESIAN_POINT('',(-1.963651795679,-4.4,2.199682015895)); +#85975 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#85976 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#85977 = CYLINDRICAL_SURFACE('',#85978,0.3); +#85978 = AXIS2_PLACEMENT_3D('',#85979,#85980,#85981); +#85979 = CARTESIAN_POINT('',(-2.168651078318,-4.4,2.375395686728)); +#85980 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#85981 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#85982 = ADVANCED_FACE('',(#85983),#86001,.T.); +#85983 = FACE_BOUND('',#85984,.T.); +#85984 = EDGE_LOOP('',(#85985,#85986,#85993,#85994)); +#85985 = ORIENTED_EDGE('',*,*,#85294,.F.); +#85986 = ORIENTED_EDGE('',*,*,#85987,.T.); +#85987 = EDGE_CURVE('',#85287,#84962,#85988,.T.); +#85988 = CIRCLE('',#85989,0.3); +#85989 = AXIS2_PLACEMENT_3D('',#85990,#85991,#85992); +#85990 = CARTESIAN_POINT('',(-2.145873380247,-4.2,2.355871945524)); +#85991 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#85992 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#85993 = ORIENTED_EDGE('',*,*,#84959,.F.); +#85994 = ORIENTED_EDGE('',*,*,#85995,.T.); +#85995 = EDGE_CURVE('',#84960,#79584,#85996,.T.); +#85996 = CIRCLE('',#85997,0.3); +#85997 = AXIS2_PLACEMENT_3D('',#85998,#85999,#86000); +#85998 = CARTESIAN_POINT('',(-1.963651795679,-4.2,2.199682015895)); +#85999 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#86000 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#86001 = CYLINDRICAL_SURFACE('',#86002,0.3); +#86002 = AXIS2_PLACEMENT_3D('',#86003,#86004,#86005); +#86003 = CARTESIAN_POINT('',(-2.168651078318,-4.2,2.375395686728)); +#86004 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#86005 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#86006 = ADVANCED_FACE('',(#86007),#86025,.T.); +#86007 = FACE_BOUND('',#86008,.T.); +#86008 = EDGE_LOOP('',(#86009,#86016,#86017,#86024)); +#86009 = ORIENTED_EDGE('',*,*,#86010,.F.); +#86010 = EDGE_CURVE('',#79701,#83299,#86011,.T.); +#86011 = CIRCLE('',#86012,3.E-02); +#86012 = AXIS2_PLACEMENT_3D('',#86013,#86014,#86015); +#86013 = CARTESIAN_POINT('',(3.47,-1.43,8.E-02)); +#86014 = DIRECTION('',(1.,-0.,0.)); +#86015 = DIRECTION('',(0.,0.,-1.)); +#86016 = ORIENTED_EDGE('',*,*,#79700,.F.); +#86017 = ORIENTED_EDGE('',*,*,#86018,.F.); +#86018 = EDGE_CURVE('',#83193,#79692,#86019,.T.); +#86019 = CIRCLE('',#86020,3.E-02); +#86020 = AXIS2_PLACEMENT_3D('',#86021,#86022,#86023); +#86021 = CARTESIAN_POINT('',(2.2,-1.43,8.E-02)); +#86022 = DIRECTION('',(-1.,0.,0.)); +#86023 = DIRECTION('',(0.,0.,1.)); +#86024 = ORIENTED_EDGE('',*,*,#83307,.F.); +#86025 = CYLINDRICAL_SURFACE('',#86026,3.E-02); +#86026 = AXIS2_PLACEMENT_3D('',#86027,#86028,#86029); +#86027 = CARTESIAN_POINT('',(7.04,-1.43,8.E-02)); +#86028 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#86029 = DIRECTION('',(-4.480174266469E-17,1.,0.)); +#86030 = ADVANCED_FACE('',(#86031),#86043,.T.); +#86031 = FACE_BOUND('',#86032,.T.); +#86032 = EDGE_LOOP('',(#86033,#86034,#86035,#86042)); +#86033 = ORIENTED_EDGE('',*,*,#86018,.T.); +#86034 = ORIENTED_EDGE('',*,*,#79689,.F.); +#86035 = ORIENTED_EDGE('',*,*,#86036,.F.); +#86036 = EDGE_CURVE('',#83154,#79690,#86037,.T.); +#86037 = CIRCLE('',#86038,3.E-02); +#86038 = AXIS2_PLACEMENT_3D('',#86039,#86040,#86041); +#86039 = CARTESIAN_POINT('',(1.87,-1.1,8.E-02)); +#86040 = DIRECTION('',(-0.,1.,0.)); +#86041 = DIRECTION('',(0.,0.,1.)); +#86042 = ORIENTED_EDGE('',*,*,#83192,.F.); +#86043 = TOROIDAL_SURFACE('',#86044,0.33,3.E-02); +#86044 = AXIS2_PLACEMENT_3D('',#86045,#86046,#86047); +#86045 = CARTESIAN_POINT('',(2.2,-1.1,8.E-02)); +#86046 = DIRECTION('',(0.,0.,-1.)); +#86047 = DIRECTION('',(-1.,0.,0.)); +#86048 = ADVANCED_FACE('',(#86049),#86061,.T.); +#86049 = FACE_BOUND('',#86050,.T.); +#86050 = EDGE_LOOP('',(#86051,#86052,#86053,#86060)); +#86051 = ORIENTED_EDGE('',*,*,#86010,.T.); +#86052 = ORIENTED_EDGE('',*,*,#83298,.F.); +#86053 = ORIENTED_EDGE('',*,*,#86054,.F.); +#86054 = EDGE_CURVE('',#82483,#83291,#86055,.T.); +#86055 = CIRCLE('',#86056,3.E-02); +#86056 = AXIS2_PLACEMENT_3D('',#86057,#86058,#86059); +#86057 = CARTESIAN_POINT('',(4.44,-1.43,1.05)); +#86058 = DIRECTION('',(-7.228014483237E-15,-7.228014483237E-15,1.)); +#86059 = DIRECTION('',(1.,0.,7.228014483237E-15)); +#86060 = ORIENTED_EDGE('',*,*,#83062,.F.); +#86061 = TOROIDAL_SURFACE('',#86062,0.97,3.E-02); +#86062 = AXIS2_PLACEMENT_3D('',#86063,#86064,#86065); +#86063 = CARTESIAN_POINT('',(3.47,-1.43,1.05)); +#86064 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#86065 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#86066 = ADVANCED_FACE('',(#86067),#86079,.T.); +#86067 = FACE_BOUND('',#86068,.T.); +#86068 = EDGE_LOOP('',(#86069,#86070,#86071,#86078)); +#86069 = ORIENTED_EDGE('',*,*,#86036,.T.); +#86070 = ORIENTED_EDGE('',*,*,#79815,.F.); +#86071 = ORIENTED_EDGE('',*,*,#86072,.F.); +#86072 = EDGE_CURVE('',#83129,#79807,#86073,.T.); +#86073 = CIRCLE('',#86074,3.E-02); +#86074 = AXIS2_PLACEMENT_3D('',#86075,#86076,#86077); +#86075 = CARTESIAN_POINT('',(1.87,0.5,8.E-02)); +#86076 = DIRECTION('',(-0.,1.,0.)); +#86077 = DIRECTION('',(0.,0.,1.)); +#86078 = ORIENTED_EDGE('',*,*,#83161,.F.); +#86079 = CYLINDRICAL_SURFACE('',#86080,3.E-02); +#86080 = AXIS2_PLACEMENT_3D('',#86081,#86082,#86083); +#86081 = CARTESIAN_POINT('',(1.87,0.5,8.E-02)); +#86082 = DIRECTION('',(0.,-1.,0.)); +#86083 = DIRECTION('',(0.,0.,-1.)); +#86084 = ADVANCED_FACE('',(#86085),#86097,.T.); +#86085 = FACE_BOUND('',#86086,.T.); +#86086 = EDGE_LOOP('',(#86087,#86088,#86089,#86096)); +#86087 = ORIENTED_EDGE('',*,*,#86054,.T.); +#86088 = ORIENTED_EDGE('',*,*,#83290,.F.); +#86089 = ORIENTED_EDGE('',*,*,#86090,.F.); +#86090 = EDGE_CURVE('',#82491,#83283,#86091,.T.); +#86091 = CIRCLE('',#86092,3.E-02); +#86092 = AXIS2_PLACEMENT_3D('',#86093,#86094,#86095); +#86093 = CARTESIAN_POINT('',(4.44,-1.43,1.25)); +#86094 = DIRECTION('',(0.,0.,1.)); +#86095 = DIRECTION('',(1.,0.,-0.)); +#86096 = ORIENTED_EDGE('',*,*,#82490,.F.); +#86097 = CYLINDRICAL_SURFACE('',#86098,3.E-02); +#86098 = AXIS2_PLACEMENT_3D('',#86099,#86100,#86101); +#86099 = CARTESIAN_POINT('',(4.44,-1.43,3.25)); +#86100 = DIRECTION('',(0.,0.,1.)); +#86101 = DIRECTION('',(1.,0.,-0.)); +#86102 = ADVANCED_FACE('',(#86103),#86115,.T.); +#86103 = FACE_BOUND('',#86104,.T.); +#86104 = EDGE_LOOP('',(#86105,#86106,#86107,#86114)); +#86105 = ORIENTED_EDGE('',*,*,#86072,.T.); +#86106 = ORIENTED_EDGE('',*,*,#79806,.F.); +#86107 = ORIENTED_EDGE('',*,*,#86108,.F.); +#86108 = EDGE_CURVE('',#83121,#79799,#86109,.T.); +#86109 = CIRCLE('',#86110,3.E-02); +#86110 = AXIS2_PLACEMENT_3D('',#86111,#86112,#86113); +#86111 = CARTESIAN_POINT('',(2.2,0.83,8.E-02)); +#86112 = DIRECTION('',(1.,0.,0.)); +#86113 = DIRECTION('',(0.,0.,-1.)); +#86114 = ORIENTED_EDGE('',*,*,#83128,.F.); +#86115 = TOROIDAL_SURFACE('',#86116,0.33,3.E-02); +#86116 = AXIS2_PLACEMENT_3D('',#86117,#86118,#86119); +#86117 = CARTESIAN_POINT('',(2.2,0.5,8.E-02)); +#86118 = DIRECTION('',(0.,0.,-1.)); +#86119 = DIRECTION('',(-1.,0.,0.)); +#86120 = ADVANCED_FACE('',(#86121),#86133,.T.); +#86121 = FACE_BOUND('',#86122,.T.); +#86122 = EDGE_LOOP('',(#86123,#86124,#86125,#86132)); +#86123 = ORIENTED_EDGE('',*,*,#86090,.T.); +#86124 = ORIENTED_EDGE('',*,*,#84726,.F.); +#86125 = ORIENTED_EDGE('',*,*,#86126,.F.); +#86126 = EDGE_CURVE('',#82499,#84695,#86127,.T.); +#86127 = CIRCLE('',#86128,3.E-02); +#86128 = AXIS2_PLACEMENT_3D('',#86129,#86130,#86131); +#86129 = CARTESIAN_POINT('',(4.44,-1.2,1.48)); +#86130 = DIRECTION('',(-0.,1.,0.)); +#86131 = DIRECTION('',(0.,0.,1.)); +#86132 = ORIENTED_EDGE('',*,*,#82498,.F.); +#86133 = TOROIDAL_SURFACE('',#86134,0.23,3.E-02); +#86134 = AXIS2_PLACEMENT_3D('',#86135,#86136,#86137); +#86135 = CARTESIAN_POINT('',(4.44,-1.2,1.25)); +#86136 = DIRECTION('',(-1.,0.,0.)); +#86137 = DIRECTION('',(0.,0.,1.)); +#86138 = ADVANCED_FACE('',(#86139),#86151,.T.); +#86139 = FACE_BOUND('',#86140,.T.); +#86140 = EDGE_LOOP('',(#86141,#86142,#86143,#86150)); +#86141 = ORIENTED_EDGE('',*,*,#86108,.T.); +#86142 = ORIENTED_EDGE('',*,*,#79798,.F.); +#86143 = ORIENTED_EDGE('',*,*,#86144,.F.); +#86144 = EDGE_CURVE('',#83217,#79791,#86145,.T.); +#86145 = CIRCLE('',#86146,3.E-02); +#86146 = AXIS2_PLACEMENT_3D('',#86147,#86148,#86149); +#86147 = CARTESIAN_POINT('',(3.47,0.83,8.E-02)); +#86148 = DIRECTION('',(1.,0.,0.)); +#86149 = DIRECTION('',(0.,0.,-1.)); +#86150 = ORIENTED_EDGE('',*,*,#83216,.F.); +#86151 = CYLINDRICAL_SURFACE('',#86152,3.E-02); +#86152 = AXIS2_PLACEMENT_3D('',#86153,#86154,#86155); +#86153 = CARTESIAN_POINT('',(7.04,0.83,8.E-02)); +#86154 = DIRECTION('',(-1.,0.,0.)); +#86155 = DIRECTION('',(0.,0.,1.)); +#86156 = ADVANCED_FACE('',(#86157),#86169,.T.); +#86157 = FACE_BOUND('',#86158,.T.); +#86158 = EDGE_LOOP('',(#86159,#86160,#86161,#86168)); +#86159 = ORIENTED_EDGE('',*,*,#86126,.T.); +#86160 = ORIENTED_EDGE('',*,*,#84702,.F.); +#86161 = ORIENTED_EDGE('',*,*,#86162,.F.); +#86162 = EDGE_CURVE('',#82508,#83740,#86163,.T.); +#86163 = CIRCLE('',#86164,3.E-02); +#86164 = AXIS2_PLACEMENT_3D('',#86165,#86166,#86167); +#86165 = CARTESIAN_POINT('',(4.44,-0.97,1.25)); +#86166 = DIRECTION('',(0.,0.,-1.)); +#86167 = DIRECTION('',(-1.,0.,0.)); +#86168 = ORIENTED_EDGE('',*,*,#82507,.F.); +#86169 = TOROIDAL_SURFACE('',#86170,0.23,3.E-02); +#86170 = AXIS2_PLACEMENT_3D('',#86171,#86172,#86173); +#86171 = CARTESIAN_POINT('',(4.44,-1.2,1.25)); +#86172 = DIRECTION('',(-1.,0.,0.)); +#86173 = DIRECTION('',(0.,0.,1.)); +#86174 = ADVANCED_FACE('',(#86175),#86187,.T.); +#86175 = FACE_BOUND('',#86176,.T.); +#86176 = EDGE_LOOP('',(#86177,#86178,#86179,#86186)); +#86177 = ORIENTED_EDGE('',*,*,#86144,.T.); +#86178 = ORIENTED_EDGE('',*,*,#82118,.F.); +#86179 = ORIENTED_EDGE('',*,*,#86180,.F.); +#86180 = EDGE_CURVE('',#83225,#82111,#86181,.T.); +#86181 = CIRCLE('',#86182,3.E-02); +#86182 = AXIS2_PLACEMENT_3D('',#86183,#86184,#86185); +#86183 = CARTESIAN_POINT('',(4.44,0.83,1.05)); +#86184 = DIRECTION('',(-7.228014483237E-15,0.,1.)); +#86185 = DIRECTION('',(1.,0.,7.228014483237E-15)); +#86186 = ORIENTED_EDGE('',*,*,#83224,.F.); +#86187 = TOROIDAL_SURFACE('',#86188,0.97,3.E-02); +#86188 = AXIS2_PLACEMENT_3D('',#86189,#86190,#86191); +#86189 = CARTESIAN_POINT('',(3.47,0.83,1.05)); +#86190 = DIRECTION('',(0.,1.,-0.)); +#86191 = DIRECTION('',(0.,0.,1.)); +#86192 = ADVANCED_FACE('',(#86193),#86205,.T.); +#86193 = FACE_BOUND('',#86194,.T.); +#86194 = EDGE_LOOP('',(#86195,#86196,#86197,#86204)); +#86195 = ORIENTED_EDGE('',*,*,#86162,.T.); +#86196 = ORIENTED_EDGE('',*,*,#83739,.F.); +#86197 = ORIENTED_EDGE('',*,*,#86198,.F.); +#86198 = EDGE_CURVE('',#82517,#83732,#86199,.T.); +#86199 = CIRCLE('',#86200,3.E-02); +#86200 = AXIS2_PLACEMENT_3D('',#86201,#86202,#86203); +#86201 = CARTESIAN_POINT('',(4.44,-0.97,0.338402894381)); +#86202 = DIRECTION('',(0.,0.,-1.)); +#86203 = DIRECTION('',(-1.,0.,0.)); +#86204 = ORIENTED_EDGE('',*,*,#82516,.F.); +#86205 = CYLINDRICAL_SURFACE('',#86206,3.E-02); +#86206 = AXIS2_PLACEMENT_3D('',#86207,#86208,#86209); +#86207 = CARTESIAN_POINT('',(4.44,-0.97,-0.85)); +#86208 = DIRECTION('',(0.,-0.,1.)); +#86209 = DIRECTION('',(1.,0.,0.)); +#86210 = ADVANCED_FACE('',(#86211),#86223,.T.); +#86211 = FACE_BOUND('',#86212,.T.); +#86212 = EDGE_LOOP('',(#86213,#86214,#86215,#86222)); +#86213 = ORIENTED_EDGE('',*,*,#86180,.T.); +#86214 = ORIENTED_EDGE('',*,*,#82602,.F.); +#86215 = ORIENTED_EDGE('',*,*,#86216,.F.); +#86216 = EDGE_CURVE('',#83234,#82594,#86217,.T.); +#86217 = CIRCLE('',#86218,3.E-02); +#86218 = AXIS2_PLACEMENT_3D('',#86219,#86220,#86221); +#86219 = CARTESIAN_POINT('',(4.44,0.83,1.25)); +#86220 = DIRECTION('',(-0.,0.,1.)); +#86221 = DIRECTION('',(1.,0.,0.)); +#86222 = ORIENTED_EDGE('',*,*,#83233,.F.); +#86223 = CYLINDRICAL_SURFACE('',#86224,3.E-02); +#86224 = AXIS2_PLACEMENT_3D('',#86225,#86226,#86227); +#86225 = CARTESIAN_POINT('',(4.44,0.83,3.25)); +#86226 = DIRECTION('',(0.,0.,-1.)); +#86227 = DIRECTION('',(-1.,0.,0.)); +#86228 = ADVANCED_FACE('',(#86229),#86241,.T.); +#86229 = FACE_BOUND('',#86230,.T.); +#86230 = EDGE_LOOP('',(#86231,#86232,#86233,#86240)); +#86231 = ORIENTED_EDGE('',*,*,#86198,.T.); +#86232 = ORIENTED_EDGE('',*,*,#84452,.F.); +#86233 = ORIENTED_EDGE('',*,*,#86234,.F.); +#86234 = EDGE_CURVE('',#82525,#84350,#86235,.T.); +#86235 = CIRCLE('',#86236,3.E-02); +#86236 = AXIS2_PLACEMENT_3D('',#86237,#86238,#86239); +#86237 = CARTESIAN_POINT('',(4.44,-0.923941410033,0.272624410926)); +#86238 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#86239 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#86240 = ORIENTED_EDGE('',*,*,#82524,.F.); +#86241 = TOROIDAL_SURFACE('',#86242,7.E-02,3.E-02); +#86242 = AXIS2_PLACEMENT_3D('',#86243,#86244,#86245); +#86243 = CARTESIAN_POINT('',(4.44,-0.9,0.338402894381)); +#86244 = DIRECTION('',(-1.,0.,0.)); +#86245 = DIRECTION('',(0.,0.,1.)); +#86246 = ADVANCED_FACE('',(#86247),#86259,.T.); +#86247 = FACE_BOUND('',#86248,.T.); +#86248 = EDGE_LOOP('',(#86249,#86250,#86251,#86258)); +#86249 = ORIENTED_EDGE('',*,*,#86216,.T.); +#86250 = ORIENTED_EDGE('',*,*,#82593,.F.); +#86251 = ORIENTED_EDGE('',*,*,#86252,.F.); +#86252 = EDGE_CURVE('',#84752,#82585,#86253,.T.); +#86253 = CIRCLE('',#86254,3.E-02); +#86254 = AXIS2_PLACEMENT_3D('',#86255,#86256,#86257); +#86255 = CARTESIAN_POINT('',(4.44,0.6,1.48)); +#86256 = DIRECTION('',(0.,-1.,0.)); +#86257 = DIRECTION('',(0.,0.,-1.)); +#86258 = ORIENTED_EDGE('',*,*,#84759,.F.); +#86259 = TOROIDAL_SURFACE('',#86260,0.23,3.E-02); +#86260 = AXIS2_PLACEMENT_3D('',#86261,#86262,#86263); +#86261 = CARTESIAN_POINT('',(4.44,0.6,1.25)); +#86262 = DIRECTION('',(-1.,0.,0.)); +#86263 = DIRECTION('',(0.,0.,1.)); +#86264 = ADVANCED_FACE('',(#86265),#86277,.T.); +#86265 = FACE_BOUND('',#86266,.T.); +#86266 = EDGE_LOOP('',(#86267,#86268,#86269,#86276)); +#86267 = ORIENTED_EDGE('',*,*,#86234,.T.); +#86268 = ORIENTED_EDGE('',*,*,#84349,.F.); +#86269 = ORIENTED_EDGE('',*,*,#86270,.F.); +#86270 = EDGE_CURVE('',#82534,#84342,#86271,.T.); +#86271 = CIRCLE('',#86272,3.E-02); +#86272 = AXIS2_PLACEMENT_3D('',#86273,#86274,#86275); +#86273 = CARTESIAN_POINT('',(4.44,-0.455537381368,0.102139286881)); +#86274 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#86275 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#86276 = ORIENTED_EDGE('',*,*,#82533,.F.); +#86277 = CYLINDRICAL_SURFACE('',#86278,3.E-02); +#86278 = AXIS2_PLACEMENT_3D('',#86279,#86280,#86281); +#86279 = CARTESIAN_POINT('',(4.44,-5.215195123904,1.834513030459)); +#86280 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#86281 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#86282 = ADVANCED_FACE('',(#86283),#86295,.T.); +#86283 = FACE_BOUND('',#86284,.T.); +#86284 = EDGE_LOOP('',(#86285,#86286,#86287,#86294)); +#86285 = ORIENTED_EDGE('',*,*,#86252,.T.); +#86286 = ORIENTED_EDGE('',*,*,#82584,.F.); +#86287 = ORIENTED_EDGE('',*,*,#86288,.F.); +#86288 = EDGE_CURVE('',#83692,#82577,#86289,.T.); +#86289 = CIRCLE('',#86290,3.E-02); +#86290 = AXIS2_PLACEMENT_3D('',#86291,#86292,#86293); +#86291 = CARTESIAN_POINT('',(4.44,0.37,1.25)); +#86292 = DIRECTION('',(0.,0.,-1.)); +#86293 = DIRECTION('',(-1.,0.,0.)); +#86294 = ORIENTED_EDGE('',*,*,#84783,.F.); +#86295 = TOROIDAL_SURFACE('',#86296,0.23,3.E-02); +#86296 = AXIS2_PLACEMENT_3D('',#86297,#86298,#86299); +#86297 = CARTESIAN_POINT('',(4.44,0.6,1.25)); +#86298 = DIRECTION('',(-1.,0.,0.)); +#86299 = DIRECTION('',(0.,0.,1.)); +#86300 = ADVANCED_FACE('',(#86301),#86313,.T.); +#86301 = FACE_BOUND('',#86302,.T.); +#86302 = EDGE_LOOP('',(#86303,#86304,#86305,#86312)); +#86303 = ORIENTED_EDGE('',*,*,#86270,.T.); +#86304 = ORIENTED_EDGE('',*,*,#84435,.F.); +#86305 = ORIENTED_EDGE('',*,*,#86306,.F.); +#86306 = EDGE_CURVE('',#82542,#84060,#86307,.T.); +#86307 = CIRCLE('',#86308,3.E-02); +#86308 = AXIS2_PLACEMENT_3D('',#86309,#86310,#86311); +#86309 = CARTESIAN_POINT('',(4.44,-0.37,-2.002075382097E-02)); +#86310 = DIRECTION('',(0.,2.258754526011E-16,-1.)); +#86311 = DIRECTION('',(0.,1.,2.258754526011E-16)); +#86312 = ORIENTED_EDGE('',*,*,#82541,.F.); +#86313 = TOROIDAL_SURFACE('',#86314,0.13,3.E-02); +#86314 = AXIS2_PLACEMENT_3D('',#86315,#86316,#86317); +#86315 = CARTESIAN_POINT('',(4.44,-0.5,-2.002075382097E-02)); +#86316 = DIRECTION('',(-1.,0.,0.)); +#86317 = DIRECTION('',(0.,0.,1.)); +#86318 = ADVANCED_FACE('',(#86319),#86331,.T.); +#86319 = FACE_BOUND('',#86320,.T.); +#86320 = EDGE_LOOP('',(#86321,#86322,#86323,#86330)); +#86321 = ORIENTED_EDGE('',*,*,#86288,.T.); +#86322 = ORIENTED_EDGE('',*,*,#82576,.F.); +#86323 = ORIENTED_EDGE('',*,*,#86324,.F.); +#86324 = EDGE_CURVE('',#83700,#82568,#86325,.T.); +#86325 = CIRCLE('',#86326,3.E-02); +#86326 = AXIS2_PLACEMENT_3D('',#86327,#86328,#86329); +#86327 = CARTESIAN_POINT('',(4.44,0.37,-0.45)); +#86328 = DIRECTION('',(0.,0.,-1.)); +#86329 = DIRECTION('',(-1.,0.,0.)); +#86330 = ORIENTED_EDGE('',*,*,#83699,.F.); +#86331 = CYLINDRICAL_SURFACE('',#86332,3.E-02); +#86332 = AXIS2_PLACEMENT_3D('',#86333,#86334,#86335); +#86333 = CARTESIAN_POINT('',(4.44,0.37,3.25)); +#86334 = DIRECTION('',(0.,0.,1.)); +#86335 = DIRECTION('',(1.,0.,-0.)); +#86336 = ADVANCED_FACE('',(#86337),#86349,.T.); +#86337 = FACE_BOUND('',#86338,.T.); +#86338 = EDGE_LOOP('',(#86339,#86340,#86341,#86348)); +#86339 = ORIENTED_EDGE('',*,*,#86306,.T.); +#86340 = ORIENTED_EDGE('',*,*,#84059,.F.); +#86341 = ORIENTED_EDGE('',*,*,#86342,.F.); +#86342 = EDGE_CURVE('',#82551,#84052,#86343,.T.); +#86343 = CIRCLE('',#86344,3.E-02); +#86344 = AXIS2_PLACEMENT_3D('',#86345,#86346,#86347); +#86345 = CARTESIAN_POINT('',(4.44,-0.37,-0.45)); +#86346 = DIRECTION('',(0.,0.,-1.)); +#86347 = DIRECTION('',(-1.,0.,0.)); +#86348 = ORIENTED_EDGE('',*,*,#82550,.F.); +#86349 = CYLINDRICAL_SURFACE('',#86350,3.E-02); +#86350 = AXIS2_PLACEMENT_3D('',#86351,#86352,#86353); +#86351 = CARTESIAN_POINT('',(4.44,-0.37,-0.85)); +#86352 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#86353 = DIRECTION('',(-0.,-1.,-1.807003620809E-16)); +#86354 = ADVANCED_FACE('',(#86355),#86367,.T.); +#86355 = FACE_BOUND('',#86356,.T.); +#86356 = EDGE_LOOP('',(#86357,#86358,#86359,#86366)); +#86357 = ORIENTED_EDGE('',*,*,#86324,.T.); +#86358 = ORIENTED_EDGE('',*,*,#82567,.F.); +#86359 = ORIENTED_EDGE('',*,*,#86360,.F.); +#86360 = EDGE_CURVE('',#84148,#82559,#86361,.T.); +#86361 = CIRCLE('',#86362,3.E-02); +#86362 = AXIS2_PLACEMENT_3D('',#86363,#86364,#86365); +#86363 = CARTESIAN_POINT('',(4.44,0.,-0.82)); +#86364 = DIRECTION('',(-4.517509052023E-17,-1.,0.)); +#86365 = DIRECTION('',(1.,-4.517509052023E-17,0.)); +#86366 = ORIENTED_EDGE('',*,*,#84147,.F.); +#86367 = TOROIDAL_SURFACE('',#86368,0.37,3.E-02); +#86368 = AXIS2_PLACEMENT_3D('',#86369,#86370,#86371); +#86369 = CARTESIAN_POINT('',(4.44,0.,-0.45)); +#86370 = DIRECTION('',(-1.,0.,0.)); +#86371 = DIRECTION('',(0.,0.,1.)); +#86372 = ADVANCED_FACE('',(#86373),#86379,.T.); +#86373 = FACE_BOUND('',#86374,.T.); +#86374 = EDGE_LOOP('',(#86375,#86376,#86377,#86378)); +#86375 = ORIENTED_EDGE('',*,*,#86342,.T.); +#86376 = ORIENTED_EDGE('',*,*,#84180,.F.); +#86377 = ORIENTED_EDGE('',*,*,#86360,.T.); +#86378 = ORIENTED_EDGE('',*,*,#82558,.F.); +#86379 = TOROIDAL_SURFACE('',#86380,0.37,3.E-02); +#86380 = AXIS2_PLACEMENT_3D('',#86381,#86382,#86383); +#86381 = CARTESIAN_POINT('',(4.44,-1.807003620809E-17,-0.45)); +#86382 = DIRECTION('',(-1.,0.,0.)); +#86383 = DIRECTION('',(0.,0.,1.)); +#86384 = ADVANCED_FACE('',(#86385),#86403,.T.); +#86385 = FACE_BOUND('',#86386,.T.); +#86386 = EDGE_LOOP('',(#86387,#86394,#86395,#86402)); +#86387 = ORIENTED_EDGE('',*,*,#86388,.F.); +#86388 = EDGE_CURVE('',#83281,#81589,#86389,.T.); +#86389 = CIRCLE('',#86390,3.E-02); +#86390 = AXIS2_PLACEMENT_3D('',#86391,#86392,#86393); +#86391 = CARTESIAN_POINT('',(4.2,-1.43,1.25)); +#86392 = DIRECTION('',(0.,-0.,1.)); +#86393 = DIRECTION('',(1.,0.,0.)); +#86394 = ORIENTED_EDGE('',*,*,#83331,.F.); +#86395 = ORIENTED_EDGE('',*,*,#86396,.F.); +#86396 = EDGE_CURVE('',#81598,#83323,#86397,.T.); +#86397 = CIRCLE('',#86398,3.E-02); +#86398 = AXIS2_PLACEMENT_3D('',#86399,#86400,#86401); +#86399 = CARTESIAN_POINT('',(4.2,-1.43,1.05)); +#86400 = DIRECTION('',(0.,7.228014483237E-15,-1.)); +#86401 = DIRECTION('',(0.,1.,7.228014483237E-15)); +#86402 = ORIENTED_EDGE('',*,*,#81597,.F.); +#86403 = CYLINDRICAL_SURFACE('',#86404,3.E-02); +#86404 = AXIS2_PLACEMENT_3D('',#86405,#86406,#86407); +#86405 = CARTESIAN_POINT('',(4.2,-1.43,0.)); +#86406 = DIRECTION('',(0.,0.,-1.)); +#86407 = DIRECTION('',(-1.,0.,0.)); +#86408 = ADVANCED_FACE('',(#86409),#86421,.T.); +#86409 = FACE_BOUND('',#86410,.T.); +#86410 = EDGE_LOOP('',(#86411,#86412,#86413,#86420)); +#86411 = ORIENTED_EDGE('',*,*,#86396,.T.); +#86412 = ORIENTED_EDGE('',*,*,#83322,.F.); +#86413 = ORIENTED_EDGE('',*,*,#86414,.F.); +#86414 = EDGE_CURVE('',#81630,#83315,#86415,.T.); +#86415 = CIRCLE('',#86416,3.E-02); +#86416 = AXIS2_PLACEMENT_3D('',#86417,#86418,#86419); +#86417 = CARTESIAN_POINT('',(3.47,-1.43,0.32)); +#86418 = DIRECTION('',(-1.,1.445602896647E-14,1.445602896647E-14)); +#86419 = DIRECTION('',(-1.445602896647E-14,-1.,3.004383907512E-42)); +#86420 = ORIENTED_EDGE('',*,*,#83037,.F.); +#86421 = TOROIDAL_SURFACE('',#86422,0.73,3.E-02); +#86422 = AXIS2_PLACEMENT_3D('',#86423,#86424,#86425); +#86423 = CARTESIAN_POINT('',(3.47,-1.43,1.05)); +#86424 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#86425 = DIRECTION('',(1.,4.480174266469E-17,0.)); +#86426 = ADVANCED_FACE('',(#86427),#86439,.T.); +#86427 = FACE_BOUND('',#86428,.T.); +#86428 = EDGE_LOOP('',(#86429,#86430,#86431,#86438)); +#86429 = ORIENTED_EDGE('',*,*,#86388,.T.); +#86430 = ORIENTED_EDGE('',*,*,#81588,.F.); +#86431 = ORIENTED_EDGE('',*,*,#86432,.F.); +#86432 = EDGE_CURVE('',#84686,#81580,#86433,.T.); +#86433 = CIRCLE('',#86434,3.E-02); +#86434 = AXIS2_PLACEMENT_3D('',#86435,#86436,#86437); +#86435 = CARTESIAN_POINT('',(4.2,-1.2,1.48)); +#86436 = DIRECTION('',(0.,1.,0.)); +#86437 = DIRECTION('',(0.,-0.,1.)); +#86438 = ORIENTED_EDGE('',*,*,#84718,.F.); +#86439 = TOROIDAL_SURFACE('',#86440,0.23,3.E-02); +#86440 = AXIS2_PLACEMENT_3D('',#86441,#86442,#86443); +#86441 = CARTESIAN_POINT('',(4.2,-1.2,1.25)); +#86442 = DIRECTION('',(1.,0.,0.)); +#86443 = DIRECTION('',(0.,0.,-1.)); +#86444 = ADVANCED_FACE('',(#86445),#86457,.T.); +#86445 = FACE_BOUND('',#86446,.T.); +#86446 = EDGE_LOOP('',(#86447,#86448,#86449,#86456)); +#86447 = ORIENTED_EDGE('',*,*,#86414,.T.); +#86448 = ORIENTED_EDGE('',*,*,#83314,.F.); +#86449 = ORIENTED_EDGE('',*,*,#86450,.F.); +#86450 = EDGE_CURVE('',#81638,#83183,#86451,.T.); +#86451 = CIRCLE('',#86452,3.E-02); +#86452 = AXIS2_PLACEMENT_3D('',#86453,#86454,#86455); +#86453 = CARTESIAN_POINT('',(2.2,-1.43,0.32)); +#86454 = DIRECTION('',(-1.,0.,0.)); +#86455 = DIRECTION('',(0.,0.,1.)); +#86456 = ORIENTED_EDGE('',*,*,#81637,.F.); +#86457 = CYLINDRICAL_SURFACE('',#86458,3.E-02); +#86458 = AXIS2_PLACEMENT_3D('',#86459,#86460,#86461); +#86459 = CARTESIAN_POINT('',(1.805510229387E-16,-1.43,0.32)); +#86460 = DIRECTION('',(-1.,-4.480174266469E-17,0.)); +#86461 = DIRECTION('',(4.480174266469E-17,-1.,0.)); +#86462 = ADVANCED_FACE('',(#86463),#86475,.T.); +#86463 = FACE_BOUND('',#86464,.T.); +#86464 = EDGE_LOOP('',(#86465,#86466,#86467,#86474)); +#86465 = ORIENTED_EDGE('',*,*,#86432,.T.); +#86466 = ORIENTED_EDGE('',*,*,#81579,.F.); +#86467 = ORIENTED_EDGE('',*,*,#86468,.F.); +#86468 = EDGE_CURVE('',#83748,#81572,#86469,.T.); +#86469 = CIRCLE('',#86470,3.E-02); +#86470 = AXIS2_PLACEMENT_3D('',#86471,#86472,#86473); +#86471 = CARTESIAN_POINT('',(4.2,-0.97,1.25)); +#86472 = DIRECTION('',(-0.,0.,-1.)); +#86473 = DIRECTION('',(-1.,0.,0.)); +#86474 = ORIENTED_EDGE('',*,*,#84685,.F.); +#86475 = TOROIDAL_SURFACE('',#86476,0.23,3.E-02); +#86476 = AXIS2_PLACEMENT_3D('',#86477,#86478,#86479); +#86477 = CARTESIAN_POINT('',(4.2,-1.2,1.25)); +#86478 = DIRECTION('',(1.,0.,0.)); +#86479 = DIRECTION('',(0.,0.,-1.)); +#86480 = ADVANCED_FACE('',(#86481),#86493,.T.); +#86481 = FACE_BOUND('',#86482,.T.); +#86482 = EDGE_LOOP('',(#86483,#86484,#86485,#86492)); +#86483 = ORIENTED_EDGE('',*,*,#86450,.T.); +#86484 = ORIENTED_EDGE('',*,*,#83182,.F.); +#86485 = ORIENTED_EDGE('',*,*,#86486,.F.); +#86486 = EDGE_CURVE('',#81646,#83152,#86487,.T.); +#86487 = CIRCLE('',#86488,3.E-02); +#86488 = AXIS2_PLACEMENT_3D('',#86489,#86490,#86491); +#86489 = CARTESIAN_POINT('',(1.87,-1.1,0.32)); +#86490 = DIRECTION('',(-0.,1.,0.)); +#86491 = DIRECTION('',(0.,0.,1.)); +#86492 = ORIENTED_EDGE('',*,*,#81645,.F.); +#86493 = TOROIDAL_SURFACE('',#86494,0.33,3.E-02); +#86494 = AXIS2_PLACEMENT_3D('',#86495,#86496,#86497); +#86495 = CARTESIAN_POINT('',(2.2,-1.1,0.32)); +#86496 = DIRECTION('',(0.,0.,-1.)); +#86497 = DIRECTION('',(-1.,0.,0.)); +#86498 = ADVANCED_FACE('',(#86499),#86511,.T.); +#86499 = FACE_BOUND('',#86500,.T.); +#86500 = EDGE_LOOP('',(#86501,#86502,#86503,#86510)); +#86501 = ORIENTED_EDGE('',*,*,#86468,.T.); +#86502 = ORIENTED_EDGE('',*,*,#81571,.F.); +#86503 = ORIENTED_EDGE('',*,*,#86504,.F.); +#86504 = EDGE_CURVE('',#83730,#81563,#86505,.T.); +#86505 = CIRCLE('',#86506,3.E-02); +#86506 = AXIS2_PLACEMENT_3D('',#86507,#86508,#86509); +#86507 = CARTESIAN_POINT('',(4.2,-0.97,0.338402894381)); +#86508 = DIRECTION('',(0.,-0.,-1.)); +#86509 = DIRECTION('',(-1.,-0.,0.)); +#86510 = ORIENTED_EDGE('',*,*,#83755,.F.); +#86511 = CYLINDRICAL_SURFACE('',#86512,3.E-02); +#86512 = AXIS2_PLACEMENT_3D('',#86513,#86514,#86515); +#86513 = CARTESIAN_POINT('',(4.2,-0.97,0.)); +#86514 = DIRECTION('',(0.,0.,1.)); +#86515 = DIRECTION('',(1.,0.,-0.)); +#86516 = ADVANCED_FACE('',(#86517),#86529,.T.); +#86517 = FACE_BOUND('',#86518,.T.); +#86518 = EDGE_LOOP('',(#86519,#86520,#86521,#86528)); +#86519 = ORIENTED_EDGE('',*,*,#86486,.T.); +#86520 = ORIENTED_EDGE('',*,*,#83168,.F.); +#86521 = ORIENTED_EDGE('',*,*,#86522,.F.); +#86522 = EDGE_CURVE('',#81655,#83112,#86523,.T.); +#86523 = CIRCLE('',#86524,3.E-02); +#86524 = AXIS2_PLACEMENT_3D('',#86525,#86526,#86527); +#86525 = CARTESIAN_POINT('',(1.87,0.5,0.32)); +#86526 = DIRECTION('',(-7.228014483237E-15,1.,0.)); +#86527 = DIRECTION('',(-1.,-7.228014483237E-15,0.)); +#86528 = ORIENTED_EDGE('',*,*,#81654,.F.); +#86529 = CYLINDRICAL_SURFACE('',#86530,3.E-02); +#86530 = AXIS2_PLACEMENT_3D('',#86531,#86532,#86533); +#86531 = CARTESIAN_POINT('',(1.87,2.6,0.32)); +#86532 = DIRECTION('',(0.,1.,0.)); +#86533 = DIRECTION('',(0.,-0.,1.)); +#86534 = ADVANCED_FACE('',(#86535),#86547,.T.); +#86535 = FACE_BOUND('',#86536,.T.); +#86536 = EDGE_LOOP('',(#86537,#86538,#86539,#86546)); +#86537 = ORIENTED_EDGE('',*,*,#86504,.T.); +#86538 = ORIENTED_EDGE('',*,*,#81562,.F.); +#86539 = ORIENTED_EDGE('',*,*,#86540,.F.); +#86540 = EDGE_CURVE('',#84358,#81555,#86541,.T.); +#86541 = CIRCLE('',#86542,3.E-02); +#86542 = AXIS2_PLACEMENT_3D('',#86543,#86544,#86545); +#86543 = CARTESIAN_POINT('',(4.2,-0.923941410033,0.272624410926)); +#86544 = DIRECTION('',(6.180316373792E-16,0.939692620786,-0.342020143326 + )); +#86545 = DIRECTION('',(-2.201042483667E-32,0.342020143326,0.939692620786 + )); +#86546 = ORIENTED_EDGE('',*,*,#84460,.F.); +#86547 = TOROIDAL_SURFACE('',#86548,7.E-02,3.E-02); +#86548 = AXIS2_PLACEMENT_3D('',#86549,#86550,#86551); +#86549 = CARTESIAN_POINT('',(4.2,-0.9,0.338402894381)); +#86550 = DIRECTION('',(1.,0.,0.)); +#86551 = DIRECTION('',(0.,0.,-1.)); +#86552 = ADVANCED_FACE('',(#86553),#86565,.T.); +#86553 = FACE_BOUND('',#86554,.T.); +#86554 = EDGE_LOOP('',(#86555,#86556,#86557,#86564)); +#86555 = ORIENTED_EDGE('',*,*,#86522,.T.); +#86556 = ORIENTED_EDGE('',*,*,#83109,.F.); +#86557 = ORIENTED_EDGE('',*,*,#86558,.F.); +#86558 = EDGE_CURVE('',#81663,#83110,#86559,.T.); +#86559 = CIRCLE('',#86560,3.E-02); +#86560 = AXIS2_PLACEMENT_3D('',#86561,#86562,#86563); +#86561 = CARTESIAN_POINT('',(2.2,0.83,0.32)); +#86562 = DIRECTION('',(1.,0.,0.)); +#86563 = DIRECTION('',(0.,-0.,-1.)); +#86564 = ORIENTED_EDGE('',*,*,#81662,.F.); +#86565 = TOROIDAL_SURFACE('',#86566,0.33,3.E-02); +#86566 = AXIS2_PLACEMENT_3D('',#86567,#86568,#86569); +#86567 = CARTESIAN_POINT('',(2.2,0.5,0.32)); +#86568 = DIRECTION('',(0.,0.,-1.)); +#86569 = DIRECTION('',(-1.,0.,0.)); +#86570 = ADVANCED_FACE('',(#86571),#86583,.T.); +#86571 = FACE_BOUND('',#86572,.T.); +#86572 = EDGE_LOOP('',(#86573,#86574,#86575,#86582)); +#86573 = ORIENTED_EDGE('',*,*,#86540,.T.); +#86574 = ORIENTED_EDGE('',*,*,#81554,.F.); +#86575 = ORIENTED_EDGE('',*,*,#86576,.F.); +#86576 = EDGE_CURVE('',#84340,#81546,#86577,.T.); +#86577 = CIRCLE('',#86578,3.E-02); +#86578 = AXIS2_PLACEMENT_3D('',#86579,#86580,#86581); +#86579 = CARTESIAN_POINT('',(4.2,-0.455537381368,0.102139286881)); +#86580 = DIRECTION('',(6.180316373792E-16,0.939692620786,-0.342020143326 + )); +#86581 = DIRECTION('',(3.723541287953E-32,0.342020143326,0.939692620786) + ); +#86582 = ORIENTED_EDGE('',*,*,#84365,.F.); +#86583 = CYLINDRICAL_SURFACE('',#86584,3.E-02); +#86584 = AXIS2_PLACEMENT_3D('',#86585,#86586,#86587); +#86585 = CARTESIAN_POINT('',(4.2,2.27539695922,-0.891839524828)); +#86586 = DIRECTION('',(0.,-0.939692620786,0.342020143326)); +#86587 = DIRECTION('',(0.,-0.342020143326,-0.939692620786)); +#86588 = ADVANCED_FACE('',(#86589),#86601,.T.); +#86589 = FACE_BOUND('',#86590,.T.); +#86590 = EDGE_LOOP('',(#86591,#86592,#86593,#86600)); +#86591 = ORIENTED_EDGE('',*,*,#86558,.T.); +#86592 = ORIENTED_EDGE('',*,*,#83266,.F.); +#86593 = ORIENTED_EDGE('',*,*,#86594,.F.); +#86594 = EDGE_CURVE('',#81672,#83258,#86595,.T.); +#86595 = CIRCLE('',#86596,3.E-02); +#86596 = AXIS2_PLACEMENT_3D('',#86597,#86598,#86599); +#86597 = CARTESIAN_POINT('',(3.47,0.83,0.32)); +#86598 = DIRECTION('',(1.,-1.445602896647E-14,0.)); +#86599 = DIRECTION('',(1.445602896647E-14,1.,0.)); +#86600 = ORIENTED_EDGE('',*,*,#81671,.F.); +#86601 = CYLINDRICAL_SURFACE('',#86602,3.E-02); +#86602 = AXIS2_PLACEMENT_3D('',#86603,#86604,#86605); +#86603 = CARTESIAN_POINT('',(0.,0.83,0.32)); +#86604 = DIRECTION('',(1.,0.,0.)); +#86605 = DIRECTION('',(0.,0.,-1.)); +#86606 = ADVANCED_FACE('',(#86607),#86619,.T.); +#86607 = FACE_BOUND('',#86608,.T.); +#86608 = EDGE_LOOP('',(#86609,#86610,#86611,#86618)); +#86609 = ORIENTED_EDGE('',*,*,#86576,.T.); +#86610 = ORIENTED_EDGE('',*,*,#81545,.F.); +#86611 = ORIENTED_EDGE('',*,*,#86612,.F.); +#86612 = EDGE_CURVE('',#84068,#81538,#86613,.T.); +#86613 = CIRCLE('',#86614,3.E-02); +#86614 = AXIS2_PLACEMENT_3D('',#86615,#86616,#86617); +#86615 = CARTESIAN_POINT('',(4.2,-0.37,-2.002075382097E-02)); +#86616 = DIRECTION('',(0.,2.258754526011E-16,-1.)); +#86617 = DIRECTION('',(0.,1.,2.258754526011E-16)); +#86618 = ORIENTED_EDGE('',*,*,#84427,.F.); +#86619 = TOROIDAL_SURFACE('',#86620,0.13,3.E-02); +#86620 = AXIS2_PLACEMENT_3D('',#86621,#86622,#86623); +#86621 = CARTESIAN_POINT('',(4.2,-0.5,-2.002075382097E-02)); +#86622 = DIRECTION('',(1.,0.,0.)); +#86623 = DIRECTION('',(0.,0.,-1.)); +#86624 = ADVANCED_FACE('',(#86625),#86637,.T.); +#86625 = FACE_BOUND('',#86626,.T.); +#86626 = EDGE_LOOP('',(#86627,#86628,#86629,#86636)); +#86627 = ORIENTED_EDGE('',*,*,#86594,.T.); +#86628 = ORIENTED_EDGE('',*,*,#83257,.F.); +#86629 = ORIENTED_EDGE('',*,*,#86630,.F.); +#86630 = EDGE_CURVE('',#81478,#83250,#86631,.T.); +#86631 = CIRCLE('',#86632,3.E-02); +#86632 = AXIS2_PLACEMENT_3D('',#86633,#86634,#86635); +#86633 = CARTESIAN_POINT('',(4.2,0.83,1.05)); +#86634 = DIRECTION('',(-7.228014483237E-15,-7.228014483237E-15,1.)); +#86635 = DIRECTION('',(1.,0.,7.228014483237E-15)); +#86636 = ORIENTED_EDGE('',*,*,#82092,.F.); +#86637 = TOROIDAL_SURFACE('',#86638,0.73,3.E-02); +#86638 = AXIS2_PLACEMENT_3D('',#86639,#86640,#86641); +#86639 = CARTESIAN_POINT('',(3.47,0.83,1.05)); +#86640 = DIRECTION('',(0.,1.,-0.)); +#86641 = DIRECTION('',(0.,0.,1.)); +#86642 = ADVANCED_FACE('',(#86643),#86655,.T.); +#86643 = FACE_BOUND('',#86644,.T.); +#86644 = EDGE_LOOP('',(#86645,#86646,#86647,#86654)); +#86645 = ORIENTED_EDGE('',*,*,#86612,.T.); +#86646 = ORIENTED_EDGE('',*,*,#81537,.F.); +#86647 = ORIENTED_EDGE('',*,*,#86648,.F.); +#86648 = EDGE_CURVE('',#84050,#81529,#86649,.T.); +#86649 = CIRCLE('',#86650,3.E-02); +#86650 = AXIS2_PLACEMENT_3D('',#86651,#86652,#86653); +#86651 = CARTESIAN_POINT('',(4.2,-0.37,-0.45)); +#86652 = DIRECTION('',(0.,-0.,-1.)); +#86653 = DIRECTION('',(-1.,-0.,0.)); +#86654 = ORIENTED_EDGE('',*,*,#84075,.F.); +#86655 = CYLINDRICAL_SURFACE('',#86656,3.E-02); +#86656 = AXIS2_PLACEMENT_3D('',#86657,#86658,#86659); +#86657 = CARTESIAN_POINT('',(4.2,-0.37,-5.366800753803E-16)); +#86658 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#86659 = DIRECTION('',(0.,-1.,-1.807003620809E-16)); +#86660 = ADVANCED_FACE('',(#86661),#86673,.T.); +#86661 = FACE_BOUND('',#86662,.T.); +#86662 = EDGE_LOOP('',(#86663,#86664,#86665,#86672)); +#86663 = ORIENTED_EDGE('',*,*,#86630,.T.); +#86664 = ORIENTED_EDGE('',*,*,#83249,.F.); +#86665 = ORIENTED_EDGE('',*,*,#86666,.F.); +#86666 = EDGE_CURVE('',#81486,#83242,#86667,.T.); +#86667 = CIRCLE('',#86668,3.E-02); +#86668 = AXIS2_PLACEMENT_3D('',#86669,#86670,#86671); +#86669 = CARTESIAN_POINT('',(4.2,0.83,1.25)); +#86670 = DIRECTION('',(0.,0.,1.)); +#86671 = DIRECTION('',(1.,0.,-0.)); +#86672 = ORIENTED_EDGE('',*,*,#81485,.F.); +#86673 = CYLINDRICAL_SURFACE('',#86674,3.E-02); +#86674 = AXIS2_PLACEMENT_3D('',#86675,#86676,#86677); +#86675 = CARTESIAN_POINT('',(4.2,0.83,0.)); +#86676 = DIRECTION('',(-0.,0.,1.)); +#86677 = DIRECTION('',(1.,0.,0.)); +#86678 = ADVANCED_FACE('',(#86679),#86691,.T.); +#86679 = FACE_BOUND('',#86680,.T.); +#86680 = EDGE_LOOP('',(#86681,#86682,#86683,#86690)); +#86681 = ORIENTED_EDGE('',*,*,#86648,.T.); +#86682 = ORIENTED_EDGE('',*,*,#81528,.F.); +#86683 = ORIENTED_EDGE('',*,*,#86684,.F.); +#86684 = EDGE_CURVE('',#84157,#81520,#86685,.T.); +#86685 = CIRCLE('',#86686,3.E-02); +#86686 = AXIS2_PLACEMENT_3D('',#86687,#86688,#86689); +#86687 = CARTESIAN_POINT('',(4.2,-1.355252715607E-18,-0.82)); +#86688 = DIRECTION('',(0.,1.,4.517509052023E-17)); +#86689 = DIRECTION('',(0.,-4.517509052023E-17,1.)); +#86690 = ORIENTED_EDGE('',*,*,#84188,.F.); +#86691 = TOROIDAL_SURFACE('',#86692,0.37,3.E-02); +#86692 = AXIS2_PLACEMENT_3D('',#86693,#86694,#86695); +#86693 = CARTESIAN_POINT('',(4.2,-1.807003620809E-17,-0.45)); +#86694 = DIRECTION('',(1.,0.,0.)); +#86695 = DIRECTION('',(0.,0.,-1.)); +#86696 = ADVANCED_FACE('',(#86697),#86709,.T.); +#86697 = FACE_BOUND('',#86698,.T.); +#86698 = EDGE_LOOP('',(#86699,#86700,#86701,#86708)); +#86699 = ORIENTED_EDGE('',*,*,#86666,.T.); +#86700 = ORIENTED_EDGE('',*,*,#84742,.F.); +#86701 = ORIENTED_EDGE('',*,*,#86702,.F.); +#86702 = EDGE_CURVE('',#81494,#84743,#86703,.T.); +#86703 = CIRCLE('',#86704,3.E-02); +#86704 = AXIS2_PLACEMENT_3D('',#86705,#86706,#86707); +#86705 = CARTESIAN_POINT('',(4.2,0.6,1.48)); +#86706 = DIRECTION('',(0.,-1.,-0.)); +#86707 = DIRECTION('',(0.,0.,-1.)); +#86708 = ORIENTED_EDGE('',*,*,#81493,.F.); +#86709 = TOROIDAL_SURFACE('',#86710,0.23,3.E-02); +#86710 = AXIS2_PLACEMENT_3D('',#86711,#86712,#86713); +#86711 = CARTESIAN_POINT('',(4.2,0.6,1.25)); +#86712 = DIRECTION('',(1.,0.,0.)); +#86713 = DIRECTION('',(0.,0.,-1.)); +#86714 = ADVANCED_FACE('',(#86715),#86727,.T.); +#86715 = FACE_BOUND('',#86716,.T.); +#86716 = EDGE_LOOP('',(#86717,#86718,#86719,#86726)); +#86717 = ORIENTED_EDGE('',*,*,#86684,.T.); +#86718 = ORIENTED_EDGE('',*,*,#81519,.F.); +#86719 = ORIENTED_EDGE('',*,*,#86720,.F.); +#86720 = EDGE_CURVE('',#83708,#81512,#86721,.T.); +#86721 = CIRCLE('',#86722,3.E-02); +#86722 = AXIS2_PLACEMENT_3D('',#86723,#86724,#86725); +#86723 = CARTESIAN_POINT('',(4.2,0.37,-0.45)); +#86724 = DIRECTION('',(0.,-0.,1.)); +#86725 = DIRECTION('',(1.,0.,0.)); +#86726 = ORIENTED_EDGE('',*,*,#84164,.F.); +#86727 = TOROIDAL_SURFACE('',#86728,0.37,3.E-02); +#86728 = AXIS2_PLACEMENT_3D('',#86729,#86730,#86731); +#86729 = CARTESIAN_POINT('',(4.2,0.,-0.45)); +#86730 = DIRECTION('',(1.,0.,0.)); +#86731 = DIRECTION('',(0.,0.,-1.)); +#86732 = ADVANCED_FACE('',(#86733),#86745,.T.); +#86733 = FACE_BOUND('',#86734,.T.); +#86734 = EDGE_LOOP('',(#86735,#86736,#86737,#86744)); +#86735 = ORIENTED_EDGE('',*,*,#86702,.T.); +#86736 = ORIENTED_EDGE('',*,*,#84775,.F.); +#86737 = ORIENTED_EDGE('',*,*,#86738,.F.); +#86738 = EDGE_CURVE('',#81503,#83690,#86739,.T.); +#86739 = CIRCLE('',#86740,3.E-02); +#86740 = AXIS2_PLACEMENT_3D('',#86741,#86742,#86743); +#86741 = CARTESIAN_POINT('',(4.2,0.37,1.25)); +#86742 = DIRECTION('',(0.,0.,-1.)); +#86743 = DIRECTION('',(-1.,0.,0.)); +#86744 = ORIENTED_EDGE('',*,*,#81502,.F.); +#86745 = TOROIDAL_SURFACE('',#86746,0.23,3.E-02); +#86746 = AXIS2_PLACEMENT_3D('',#86747,#86748,#86749); +#86747 = CARTESIAN_POINT('',(4.2,0.6,1.25)); +#86748 = DIRECTION('',(1.,0.,0.)); +#86749 = DIRECTION('',(0.,0.,-1.)); +#86750 = ADVANCED_FACE('',(#86751),#86757,.T.); +#86751 = FACE_BOUND('',#86752,.T.); +#86752 = EDGE_LOOP('',(#86753,#86754,#86755,#86756)); +#86753 = ORIENTED_EDGE('',*,*,#86720,.T.); +#86754 = ORIENTED_EDGE('',*,*,#81511,.F.); +#86755 = ORIENTED_EDGE('',*,*,#86738,.T.); +#86756 = ORIENTED_EDGE('',*,*,#83715,.F.); +#86757 = CYLINDRICAL_SURFACE('',#86758,3.E-02); +#86758 = AXIS2_PLACEMENT_3D('',#86759,#86760,#86761); +#86759 = CARTESIAN_POINT('',(4.2,0.37,-0.85)); +#86760 = DIRECTION('',(0.,0.,1.)); +#86761 = DIRECTION('',(1.,0.,-0.)); +#86762 = ADVANCED_FACE('',(#86763),#86781,.T.); +#86763 = FACE_BOUND('',#86764,.T.); +#86764 = EDGE_LOOP('',(#86765,#86772,#86773,#86780)); +#86765 = ORIENTED_EDGE('',*,*,#86766,.F.); +#86766 = EDGE_CURVE('',#84310,#82869,#86767,.T.); +#86767 = CIRCLE('',#86768,3.E-02); +#86768 = AXIS2_PLACEMENT_3D('',#86769,#86770,#86771); +#86769 = CARTESIAN_POINT('',(-4.44,-0.455537381368,0.102139286881)); +#86770 = DIRECTION('',(4.604056588646E-16,0.939692620786,-0.342020143326 + )); +#86771 = DIRECTION('',(-6.596135952018E-32,0.342020143326,0.939692620786 + )); +#86772 = ORIENTED_EDGE('',*,*,#84309,.F.); +#86773 = ORIENTED_EDGE('',*,*,#86774,.F.); +#86774 = EDGE_CURVE('',#82878,#84302,#86775,.T.); +#86775 = CIRCLE('',#86776,3.E-02); +#86776 = AXIS2_PLACEMENT_3D('',#86777,#86778,#86779); +#86777 = CARTESIAN_POINT('',(-4.44,-0.923941410033,0.272624410926)); +#86778 = DIRECTION('',(0.,-0.939692620786,0.342020143326)); +#86779 = DIRECTION('',(0.,-0.342020143326,-0.939692620786)); +#86780 = ORIENTED_EDGE('',*,*,#82877,.F.); +#86781 = CYLINDRICAL_SURFACE('',#86782,3.E-02); +#86782 = AXIS2_PLACEMENT_3D('',#86783,#86784,#86785); +#86783 = CARTESIAN_POINT('',(-4.44,-5.215195123904,1.834513030459)); +#86784 = DIRECTION('',(0.,-0.939692620786,0.342020143326)); +#86785 = DIRECTION('',(0.,-0.342020143326,-0.939692620786)); +#86786 = ADVANCED_FACE('',(#86787),#86799,.T.); +#86787 = FACE_BOUND('',#86788,.T.); +#86788 = EDGE_LOOP('',(#86789,#86790,#86791,#86798)); +#86789 = ORIENTED_EDGE('',*,*,#86774,.T.); +#86790 = ORIENTED_EDGE('',*,*,#84380,.F.); +#86791 = ORIENTED_EDGE('',*,*,#86792,.F.); +#86792 = EDGE_CURVE('',#82886,#83900,#86793,.T.); +#86793 = CIRCLE('',#86794,3.E-02); +#86794 = AXIS2_PLACEMENT_3D('',#86795,#86796,#86797); +#86795 = CARTESIAN_POINT('',(-4.44,-0.97,0.338402894381)); +#86796 = DIRECTION('',(0.,0.,1.)); +#86797 = DIRECTION('',(1.,0.,-0.)); +#86798 = ORIENTED_EDGE('',*,*,#82885,.F.); +#86799 = TOROIDAL_SURFACE('',#86800,7.E-02,3.E-02); +#86800 = AXIS2_PLACEMENT_3D('',#86801,#86802,#86803); +#86801 = CARTESIAN_POINT('',(-4.44,-0.9,0.338402894381)); +#86802 = DIRECTION('',(1.,0.,0.)); +#86803 = DIRECTION('',(0.,0.,-1.)); +#86804 = ADVANCED_FACE('',(#86805),#86817,.T.); +#86805 = FACE_BOUND('',#86806,.T.); +#86806 = EDGE_LOOP('',(#86807,#86808,#86809,#86816)); +#86807 = ORIENTED_EDGE('',*,*,#86766,.T.); +#86808 = ORIENTED_EDGE('',*,*,#82868,.F.); +#86809 = ORIENTED_EDGE('',*,*,#86810,.F.); +#86810 = EDGE_CURVE('',#84012,#82861,#86811,.T.); +#86811 = CIRCLE('',#86812,3.E-02); +#86812 = AXIS2_PLACEMENT_3D('',#86813,#86814,#86815); +#86813 = CARTESIAN_POINT('',(-4.44,-0.37,-2.002075382097E-02)); +#86814 = DIRECTION('',(0.,2.258754526011E-16,-1.)); +#86815 = DIRECTION('',(0.,1.,2.258754526011E-16)); +#86816 = ORIENTED_EDGE('',*,*,#84411,.F.); +#86817 = TOROIDAL_SURFACE('',#86818,0.13,3.E-02); +#86818 = AXIS2_PLACEMENT_3D('',#86819,#86820,#86821); +#86819 = CARTESIAN_POINT('',(-4.44,-0.5,-2.002075382097E-02)); +#86820 = DIRECTION('',(1.,0.,0.)); +#86821 = DIRECTION('',(0.,0.,-1.)); +#86822 = ADVANCED_FACE('',(#86823),#86835,.T.); +#86823 = FACE_BOUND('',#86824,.T.); +#86824 = EDGE_LOOP('',(#86825,#86826,#86827,#86834)); +#86825 = ORIENTED_EDGE('',*,*,#86792,.T.); +#86826 = ORIENTED_EDGE('',*,*,#83899,.F.); +#86827 = ORIENTED_EDGE('',*,*,#86828,.F.); +#86828 = EDGE_CURVE('',#82895,#83892,#86829,.T.); +#86829 = CIRCLE('',#86830,3.E-02); +#86830 = AXIS2_PLACEMENT_3D('',#86831,#86832,#86833); +#86831 = CARTESIAN_POINT('',(-4.44,-0.97,1.25)); +#86832 = DIRECTION('',(0.,0.,1.)); +#86833 = DIRECTION('',(1.,0.,-0.)); +#86834 = ORIENTED_EDGE('',*,*,#82894,.F.); +#86835 = CYLINDRICAL_SURFACE('',#86836,3.E-02); +#86836 = AXIS2_PLACEMENT_3D('',#86837,#86838,#86839); +#86837 = CARTESIAN_POINT('',(-4.44,-0.97,3.25)); +#86838 = DIRECTION('',(0.,-0.,1.)); +#86839 = DIRECTION('',(1.,0.,0.)); +#86840 = ADVANCED_FACE('',(#86841),#86853,.T.); +#86841 = FACE_BOUND('',#86842,.T.); +#86842 = EDGE_LOOP('',(#86843,#86844,#86845,#86852)); +#86843 = ORIENTED_EDGE('',*,*,#86810,.T.); +#86844 = ORIENTED_EDGE('',*,*,#82860,.F.); +#86845 = ORIENTED_EDGE('',*,*,#86846,.F.); +#86846 = EDGE_CURVE('',#84020,#82852,#86847,.T.); +#86847 = CIRCLE('',#86848,3.E-02); +#86848 = AXIS2_PLACEMENT_3D('',#86849,#86850,#86851); +#86849 = CARTESIAN_POINT('',(-4.44,-0.37,-0.45)); +#86850 = DIRECTION('',(-0.,0.,-1.)); +#86851 = DIRECTION('',(-1.,0.,0.)); +#86852 = ORIENTED_EDGE('',*,*,#84019,.F.); +#86853 = CYLINDRICAL_SURFACE('',#86854,3.E-02); +#86854 = AXIS2_PLACEMENT_3D('',#86855,#86856,#86857); +#86855 = CARTESIAN_POINT('',(-4.44,-0.37,3.25)); +#86856 = DIRECTION('',(0.,-1.807003620809E-16,1.)); +#86857 = DIRECTION('',(-0.,-1.,-1.807003620809E-16)); +#86858 = ADVANCED_FACE('',(#86859),#86871,.T.); +#86859 = FACE_BOUND('',#86860,.T.); +#86860 = EDGE_LOOP('',(#86861,#86862,#86863,#86870)); +#86861 = ORIENTED_EDGE('',*,*,#86828,.T.); +#86862 = ORIENTED_EDGE('',*,*,#84669,.F.); +#86863 = ORIENTED_EDGE('',*,*,#86864,.F.); +#86864 = EDGE_CURVE('',#82691,#84638,#86865,.T.); +#86865 = CIRCLE('',#86866,3.E-02); +#86866 = AXIS2_PLACEMENT_3D('',#86867,#86868,#86869); +#86867 = CARTESIAN_POINT('',(-4.44,-1.2,1.48)); +#86868 = DIRECTION('',(0.,-1.,-0.)); +#86869 = DIRECTION('',(0.,0.,-1.)); +#86870 = ORIENTED_EDGE('',*,*,#82902,.F.); +#86871 = TOROIDAL_SURFACE('',#86872,0.23,3.E-02); +#86872 = AXIS2_PLACEMENT_3D('',#86873,#86874,#86875); +#86873 = CARTESIAN_POINT('',(-4.44,-1.2,1.25)); +#86874 = DIRECTION('',(1.,0.,0.)); +#86875 = DIRECTION('',(0.,0.,-1.)); +#86876 = ADVANCED_FACE('',(#86877),#86889,.T.); +#86877 = FACE_BOUND('',#86878,.T.); +#86878 = EDGE_LOOP('',(#86879,#86880,#86881,#86888)); +#86879 = ORIENTED_EDGE('',*,*,#86846,.T.); +#86880 = ORIENTED_EDGE('',*,*,#82851,.F.); +#86881 = ORIENTED_EDGE('',*,*,#86882,.F.); +#86882 = EDGE_CURVE('',#84090,#82843,#86883,.T.); +#86883 = CIRCLE('',#86884,3.E-02); +#86884 = AXIS2_PLACEMENT_3D('',#86885,#86886,#86887); +#86885 = CARTESIAN_POINT('',(-4.44,-1.355252715607E-18,-0.82)); +#86886 = DIRECTION('',(0.,1.,4.517509052023E-17)); +#86887 = DIRECTION('',(0.,-4.517509052023E-17,1.)); +#86888 = ORIENTED_EDGE('',*,*,#84123,.F.); +#86889 = TOROIDAL_SURFACE('',#86890,0.37,3.E-02); +#86890 = AXIS2_PLACEMENT_3D('',#86891,#86892,#86893); +#86891 = CARTESIAN_POINT('',(-4.44,-1.807003620809E-17,-0.45)); +#86892 = DIRECTION('',(1.,0.,0.)); +#86893 = DIRECTION('',(0.,0.,-1.)); +#86894 = ADVANCED_FACE('',(#86895),#86907,.T.); +#86895 = FACE_BOUND('',#86896,.T.); +#86896 = EDGE_LOOP('',(#86897,#86898,#86899,#86906)); +#86897 = ORIENTED_EDGE('',*,*,#86864,.T.); +#86898 = ORIENTED_EDGE('',*,*,#84645,.F.); +#86899 = ORIENTED_EDGE('',*,*,#86900,.F.); +#86900 = EDGE_CURVE('',#82693,#83481,#86901,.T.); +#86901 = CIRCLE('',#86902,3.E-02); +#86902 = AXIS2_PLACEMENT_3D('',#86903,#86904,#86905); +#86903 = CARTESIAN_POINT('',(-4.44,-1.43,1.25)); +#86904 = DIRECTION('',(0.,0.,-1.)); +#86905 = DIRECTION('',(-1.,0.,0.)); +#86906 = ORIENTED_EDGE('',*,*,#82690,.F.); +#86907 = TOROIDAL_SURFACE('',#86908,0.23,3.E-02); +#86908 = AXIS2_PLACEMENT_3D('',#86909,#86910,#86911); +#86909 = CARTESIAN_POINT('',(-4.44,-1.2,1.25)); +#86910 = DIRECTION('',(1.,0.,0.)); +#86911 = DIRECTION('',(0.,0.,-1.)); +#86912 = ADVANCED_FACE('',(#86913),#86925,.T.); +#86913 = FACE_BOUND('',#86914,.T.); +#86914 = EDGE_LOOP('',(#86915,#86916,#86917,#86924)); +#86915 = ORIENTED_EDGE('',*,*,#86882,.T.); +#86916 = ORIENTED_EDGE('',*,*,#82842,.F.); +#86917 = ORIENTED_EDGE('',*,*,#86918,.F.); +#86918 = EDGE_CURVE('',#83852,#82835,#86919,.T.); +#86919 = CIRCLE('',#86920,3.E-02); +#86920 = AXIS2_PLACEMENT_3D('',#86921,#86922,#86923); +#86921 = CARTESIAN_POINT('',(-4.44,0.37,-0.45)); +#86922 = DIRECTION('',(0.,-0.,1.)); +#86923 = DIRECTION('',(1.,0.,0.)); +#86924 = ORIENTED_EDGE('',*,*,#84099,.F.); +#86925 = TOROIDAL_SURFACE('',#86926,0.37,3.E-02); +#86926 = AXIS2_PLACEMENT_3D('',#86927,#86928,#86929); +#86927 = CARTESIAN_POINT('',(-4.44,0.,-0.45)); +#86928 = DIRECTION('',(1.,0.,0.)); +#86929 = DIRECTION('',(0.,0.,-1.)); +#86930 = ADVANCED_FACE('',(#86931),#86943,.T.); +#86931 = FACE_BOUND('',#86932,.T.); +#86932 = EDGE_LOOP('',(#86933,#86934,#86935,#86942)); +#86933 = ORIENTED_EDGE('',*,*,#86900,.T.); +#86934 = ORIENTED_EDGE('',*,*,#83480,.F.); +#86935 = ORIENTED_EDGE('',*,*,#86936,.F.); +#86936 = EDGE_CURVE('',#81954,#83472,#86937,.T.); +#86937 = CIRCLE('',#86938,3.E-02); +#86938 = AXIS2_PLACEMENT_3D('',#86939,#86940,#86941); +#86939 = CARTESIAN_POINT('',(-4.44,-1.43,1.05)); +#86940 = DIRECTION('',(0.,-7.228014483237E-15,-1.)); +#86941 = DIRECTION('',(0.,1.,-7.228014483237E-15)); +#86942 = ORIENTED_EDGE('',*,*,#82701,.F.); +#86943 = CYLINDRICAL_SURFACE('',#86944,3.E-02); +#86944 = AXIS2_PLACEMENT_3D('',#86945,#86946,#86947); +#86945 = CARTESIAN_POINT('',(-4.44,-1.43,3.25)); +#86946 = DIRECTION('',(0.,0.,-1.)); +#86947 = DIRECTION('',(-1.,0.,0.)); +#86948 = ADVANCED_FACE('',(#86949),#86961,.T.); +#86949 = FACE_BOUND('',#86950,.T.); +#86950 = EDGE_LOOP('',(#86951,#86952,#86953,#86960)); +#86951 = ORIENTED_EDGE('',*,*,#86918,.T.); +#86952 = ORIENTED_EDGE('',*,*,#82834,.F.); +#86953 = ORIENTED_EDGE('',*,*,#86954,.F.); +#86954 = EDGE_CURVE('',#83860,#82826,#86955,.T.); +#86955 = CIRCLE('',#86956,3.E-02); +#86956 = AXIS2_PLACEMENT_3D('',#86957,#86958,#86959); +#86957 = CARTESIAN_POINT('',(-4.44,0.37,1.25)); +#86958 = DIRECTION('',(0.,-0.,1.)); +#86959 = DIRECTION('',(1.,0.,0.)); +#86960 = ORIENTED_EDGE('',*,*,#83859,.F.); +#86961 = CYLINDRICAL_SURFACE('',#86962,3.E-02); +#86962 = AXIS2_PLACEMENT_3D('',#86963,#86964,#86965); +#86963 = CARTESIAN_POINT('',(-4.44,0.37,-0.85)); +#86964 = DIRECTION('',(-0.,0.,1.)); +#86965 = DIRECTION('',(1.,0.,0.)); +#86966 = ADVANCED_FACE('',(#86967),#86979,.T.); +#86967 = FACE_BOUND('',#86968,.T.); +#86968 = EDGE_LOOP('',(#86969,#86970,#86971,#86978)); +#86969 = ORIENTED_EDGE('',*,*,#86936,.T.); +#86970 = ORIENTED_EDGE('',*,*,#83471,.F.); +#86971 = ORIENTED_EDGE('',*,*,#86972,.F.); +#86972 = EDGE_CURVE('',#79725,#83464,#86973,.T.); +#86973 = CIRCLE('',#86974,3.E-02); +#86974 = AXIS2_PLACEMENT_3D('',#86975,#86976,#86977); +#86975 = CARTESIAN_POINT('',(-3.47,-1.43,8.E-02)); +#86976 = DIRECTION('',(1.,0.,0.)); +#86977 = DIRECTION('',(0.,0.,-1.)); +#86978 = ORIENTED_EDGE('',*,*,#81963,.F.); +#86979 = TOROIDAL_SURFACE('',#86980,0.97,3.E-02); +#86980 = AXIS2_PLACEMENT_3D('',#86981,#86982,#86983); +#86981 = CARTESIAN_POINT('',(-3.47,-1.43,1.05)); +#86982 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#86983 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#86984 = ADVANCED_FACE('',(#86985),#86997,.T.); +#86985 = FACE_BOUND('',#86986,.T.); +#86986 = EDGE_LOOP('',(#86987,#86988,#86989,#86996)); +#86987 = ORIENTED_EDGE('',*,*,#86954,.T.); +#86988 = ORIENTED_EDGE('',*,*,#82825,.F.); +#86989 = ORIENTED_EDGE('',*,*,#86990,.F.); +#86990 = EDGE_CURVE('',#84582,#82817,#86991,.T.); +#86991 = CIRCLE('',#86992,3.E-02); +#86992 = AXIS2_PLACEMENT_3D('',#86993,#86994,#86995); +#86993 = CARTESIAN_POINT('',(-4.44,0.6,1.48)); +#86994 = DIRECTION('',(0.,1.,0.)); +#86995 = DIRECTION('',(0.,-0.,1.)); +#86996 = ORIENTED_EDGE('',*,*,#84612,.F.); +#86997 = TOROIDAL_SURFACE('',#86998,0.23,3.E-02); +#86998 = AXIS2_PLACEMENT_3D('',#86999,#87000,#87001); +#86999 = CARTESIAN_POINT('',(-4.44,0.6,1.25)); +#87000 = DIRECTION('',(1.,0.,0.)); +#87001 = DIRECTION('',(0.,0.,-1.)); +#87002 = ADVANCED_FACE('',(#87003),#87015,.T.); +#87003 = FACE_BOUND('',#87004,.T.); +#87004 = EDGE_LOOP('',(#87005,#87006,#87007,#87014)); +#87005 = ORIENTED_EDGE('',*,*,#86972,.T.); +#87006 = ORIENTED_EDGE('',*,*,#83463,.F.); +#87007 = ORIENTED_EDGE('',*,*,#87008,.F.); +#87008 = EDGE_CURVE('',#79733,#83456,#87009,.T.); +#87009 = CIRCLE('',#87010,3.E-02); +#87010 = AXIS2_PLACEMENT_3D('',#87011,#87012,#87013); +#87011 = CARTESIAN_POINT('',(-2.2,-1.43,8.E-02)); +#87012 = DIRECTION('',(1.,-0.,0.)); +#87013 = DIRECTION('',(0.,0.,-1.)); +#87014 = ORIENTED_EDGE('',*,*,#79732,.F.); +#87015 = CYLINDRICAL_SURFACE('',#87016,3.E-02); +#87016 = AXIS2_PLACEMENT_3D('',#87017,#87018,#87019); +#87017 = CARTESIAN_POINT('',(-7.04,-1.43,8.E-02)); +#87018 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#87019 = DIRECTION('',(3.136121986528E-16,1.,0.)); +#87020 = ADVANCED_FACE('',(#87021),#87033,.T.); +#87021 = FACE_BOUND('',#87022,.T.); +#87022 = EDGE_LOOP('',(#87023,#87024,#87025,#87032)); +#87023 = ORIENTED_EDGE('',*,*,#86990,.T.); +#87024 = ORIENTED_EDGE('',*,*,#82816,.F.); +#87025 = ORIENTED_EDGE('',*,*,#87026,.F.); +#87026 = EDGE_CURVE('',#83651,#82809,#87027,.T.); +#87027 = CIRCLE('',#87028,3.E-02); +#87028 = AXIS2_PLACEMENT_3D('',#87029,#87030,#87031); +#87029 = CARTESIAN_POINT('',(-4.44,0.83,1.25)); +#87030 = DIRECTION('',(-0.,0.,-1.)); +#87031 = DIRECTION('',(-1.,0.,0.)); +#87032 = ORIENTED_EDGE('',*,*,#84581,.F.); +#87033 = TOROIDAL_SURFACE('',#87034,0.23,3.E-02); +#87034 = AXIS2_PLACEMENT_3D('',#87035,#87036,#87037); +#87035 = CARTESIAN_POINT('',(-4.44,0.6,1.25)); +#87036 = DIRECTION('',(1.,0.,0.)); +#87037 = DIRECTION('',(0.,0.,-1.)); +#87038 = ADVANCED_FACE('',(#87039),#87051,.T.); +#87039 = FACE_BOUND('',#87040,.T.); +#87040 = EDGE_LOOP('',(#87041,#87042,#87043,#87050)); +#87041 = ORIENTED_EDGE('',*,*,#87008,.T.); +#87042 = ORIENTED_EDGE('',*,*,#83537,.F.); +#87043 = ORIENTED_EDGE('',*,*,#87044,.F.); +#87044 = EDGE_CURVE('',#79741,#83538,#87045,.T.); +#87045 = CIRCLE('',#87046,3.E-02); +#87046 = AXIS2_PLACEMENT_3D('',#87047,#87048,#87049); +#87047 = CARTESIAN_POINT('',(-1.87,-1.1,8.E-02)); +#87048 = DIRECTION('',(0.,1.,0.)); +#87049 = DIRECTION('',(0.,-0.,1.)); +#87050 = ORIENTED_EDGE('',*,*,#79740,.F.); +#87051 = TOROIDAL_SURFACE('',#87052,0.33,3.E-02); +#87052 = AXIS2_PLACEMENT_3D('',#87053,#87054,#87055); +#87053 = CARTESIAN_POINT('',(-2.2,-1.1,8.E-02)); +#87054 = DIRECTION('',(0.,0.,-1.)); +#87055 = DIRECTION('',(-1.,0.,0.)); +#87056 = ADVANCED_FACE('',(#87057),#87069,.T.); +#87057 = FACE_BOUND('',#87058,.T.); +#87058 = EDGE_LOOP('',(#87059,#87060,#87061,#87068)); +#87059 = ORIENTED_EDGE('',*,*,#87026,.T.); +#87060 = ORIENTED_EDGE('',*,*,#82808,.F.); +#87061 = ORIENTED_EDGE('',*,*,#87062,.F.); +#87062 = EDGE_CURVE('',#83659,#82801,#87063,.T.); +#87063 = CIRCLE('',#87064,3.E-02); +#87064 = AXIS2_PLACEMENT_3D('',#87065,#87066,#87067); +#87065 = CARTESIAN_POINT('',(-4.44,0.83,1.05)); +#87066 = DIRECTION('',(-0.,0.,-1.)); +#87067 = DIRECTION('',(-1.,0.,0.)); +#87068 = ORIENTED_EDGE('',*,*,#83658,.F.); +#87069 = CYLINDRICAL_SURFACE('',#87070,3.E-02); +#87070 = AXIS2_PLACEMENT_3D('',#87071,#87072,#87073); +#87071 = CARTESIAN_POINT('',(-4.44,0.83,3.25)); +#87072 = DIRECTION('',(0.,0.,1.)); +#87073 = DIRECTION('',(1.,0.,-0.)); +#87074 = ADVANCED_FACE('',(#87075),#87087,.T.); +#87075 = FACE_BOUND('',#87076,.T.); +#87076 = EDGE_LOOP('',(#87077,#87078,#87079,#87086)); +#87077 = ORIENTED_EDGE('',*,*,#87044,.T.); +#87078 = ORIENTED_EDGE('',*,*,#83570,.F.); +#87079 = ORIENTED_EDGE('',*,*,#87080,.F.); +#87080 = EDGE_CURVE('',#79750,#83563,#87081,.T.); +#87081 = CIRCLE('',#87082,3.E-02); +#87082 = AXIS2_PLACEMENT_3D('',#87083,#87084,#87085); +#87083 = CARTESIAN_POINT('',(-1.87,0.5,8.E-02)); +#87084 = DIRECTION('',(7.228014483237E-15,1.,0.)); +#87085 = DIRECTION('',(-1.,7.228014483237E-15,0.)); +#87086 = ORIENTED_EDGE('',*,*,#79749,.F.); +#87087 = CYLINDRICAL_SURFACE('',#87088,3.E-02); +#87088 = AXIS2_PLACEMENT_3D('',#87089,#87090,#87091); +#87089 = CARTESIAN_POINT('',(-1.87,0.5,8.E-02)); +#87090 = DIRECTION('',(5.421010862428E-16,1.,0.)); +#87091 = DIRECTION('',(-1.,5.421010862428E-16,0.)); +#87092 = ADVANCED_FACE('',(#87093),#87105,.T.); +#87093 = FACE_BOUND('',#87094,.T.); +#87094 = EDGE_LOOP('',(#87095,#87096,#87097,#87104)); +#87095 = ORIENTED_EDGE('',*,*,#87062,.T.); +#87096 = ORIENTED_EDGE('',*,*,#82950,.F.); +#87097 = ORIENTED_EDGE('',*,*,#87098,.F.); +#87098 = EDGE_CURVE('',#83667,#79767,#87099,.T.); +#87099 = CIRCLE('',#87100,3.E-02); +#87100 = AXIS2_PLACEMENT_3D('',#87101,#87102,#87103); +#87101 = CARTESIAN_POINT('',(-3.47,0.83,8.E-02)); +#87102 = DIRECTION('',(1.,0.,0.)); +#87103 = DIRECTION('',(0.,0.,-1.)); +#87104 = ORIENTED_EDGE('',*,*,#83666,.F.); +#87105 = TOROIDAL_SURFACE('',#87106,0.97,3.E-02); +#87106 = AXIS2_PLACEMENT_3D('',#87107,#87108,#87109); +#87107 = CARTESIAN_POINT('',(-3.47,0.83,1.05)); +#87108 = DIRECTION('',(0.,1.,0.)); +#87109 = DIRECTION('',(0.,-0.,1.)); +#87110 = ADVANCED_FACE('',(#87111),#87123,.T.); +#87111 = FACE_BOUND('',#87112,.T.); +#87112 = EDGE_LOOP('',(#87113,#87114,#87115,#87122)); +#87113 = ORIENTED_EDGE('',*,*,#87080,.T.); +#87114 = ORIENTED_EDGE('',*,*,#83601,.F.); +#87115 = ORIENTED_EDGE('',*,*,#87116,.F.); +#87116 = EDGE_CURVE('',#79758,#83602,#87117,.T.); +#87117 = CIRCLE('',#87118,3.E-02); +#87118 = AXIS2_PLACEMENT_3D('',#87119,#87120,#87121); +#87119 = CARTESIAN_POINT('',(-2.2,0.83,8.E-02)); +#87120 = DIRECTION('',(-1.,0.,-0.)); +#87121 = DIRECTION('',(-0.,0.,1.)); +#87122 = ORIENTED_EDGE('',*,*,#79757,.F.); +#87123 = TOROIDAL_SURFACE('',#87124,0.33,3.E-02); +#87124 = AXIS2_PLACEMENT_3D('',#87125,#87126,#87127); +#87125 = CARTESIAN_POINT('',(-2.2,0.5,8.E-02)); +#87126 = DIRECTION('',(0.,0.,-1.)); +#87127 = DIRECTION('',(-1.,0.,0.)); +#87128 = ADVANCED_FACE('',(#87129),#87135,.T.); +#87129 = FACE_BOUND('',#87130,.T.); +#87130 = EDGE_LOOP('',(#87131,#87132,#87133,#87134)); +#87131 = ORIENTED_EDGE('',*,*,#87098,.T.); +#87132 = ORIENTED_EDGE('',*,*,#79766,.F.); +#87133 = ORIENTED_EDGE('',*,*,#87116,.T.); +#87134 = ORIENTED_EDGE('',*,*,#83675,.F.); +#87135 = CYLINDRICAL_SURFACE('',#87136,3.E-02); +#87136 = AXIS2_PLACEMENT_3D('',#87137,#87138,#87139); +#87137 = CARTESIAN_POINT('',(-7.04,0.83,8.E-02)); +#87138 = DIRECTION('',(-1.,0.,0.)); +#87139 = DIRECTION('',(0.,0.,1.)); +#87140 = ADVANCED_FACE('',(#87141),#87159,.T.); +#87141 = FACE_BOUND('',#87142,.T.); +#87142 = EDGE_LOOP('',(#87143,#87150,#87151,#87158)); +#87143 = ORIENTED_EDGE('',*,*,#87144,.F.); +#87144 = EDGE_CURVE('',#81738,#83505,#87145,.T.); +#87145 = CIRCLE('',#87146,3.E-02); +#87146 = AXIS2_PLACEMENT_3D('',#87147,#87148,#87149); +#87147 = CARTESIAN_POINT('',(-3.47,-1.43,0.32)); +#87148 = DIRECTION('',(-1.,1.445602896647E-14,0.)); +#87149 = DIRECTION('',(-1.445602896647E-14,-1.,0.)); +#87150 = ORIENTED_EDGE('',*,*,#81737,.F.); +#87151 = ORIENTED_EDGE('',*,*,#87152,.F.); +#87152 = EDGE_CURVE('',#83454,#81729,#87153,.T.); +#87153 = CIRCLE('',#87154,3.E-02); +#87154 = AXIS2_PLACEMENT_3D('',#87155,#87156,#87157); +#87155 = CARTESIAN_POINT('',(-2.2,-1.43,0.32)); +#87156 = DIRECTION('',(1.,0.,0.)); +#87157 = DIRECTION('',(0.,-0.,-1.)); +#87158 = ORIENTED_EDGE('',*,*,#83513,.F.); +#87159 = CYLINDRICAL_SURFACE('',#87160,3.E-02); +#87160 = AXIS2_PLACEMENT_3D('',#87161,#87162,#87163); +#87161 = CARTESIAN_POINT('',(-1.263857160571E-15,-1.43,0.32)); +#87162 = DIRECTION('',(-1.,3.136121986528E-16,0.)); +#87163 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#87164 = ADVANCED_FACE('',(#87165),#87177,.T.); +#87165 = FACE_BOUND('',#87166,.T.); +#87166 = EDGE_LOOP('',(#87167,#87168,#87169,#87176)); +#87167 = ORIENTED_EDGE('',*,*,#87152,.T.); +#87168 = ORIENTED_EDGE('',*,*,#81728,.F.); +#87169 = ORIENTED_EDGE('',*,*,#87170,.F.); +#87170 = EDGE_CURVE('',#83528,#81721,#87171,.T.); +#87171 = CIRCLE('',#87172,3.E-02); +#87172 = AXIS2_PLACEMENT_3D('',#87173,#87174,#87175); +#87173 = CARTESIAN_POINT('',(-1.87,-1.1,0.32)); +#87174 = DIRECTION('',(0.,1.,0.)); +#87175 = DIRECTION('',(0.,-0.,1.)); +#87176 = ORIENTED_EDGE('',*,*,#83527,.F.); +#87177 = TOROIDAL_SURFACE('',#87178,0.33,3.E-02); +#87178 = AXIS2_PLACEMENT_3D('',#87179,#87180,#87181); +#87179 = CARTESIAN_POINT('',(-2.2,-1.1,0.32)); +#87180 = DIRECTION('',(0.,0.,-1.)); +#87181 = DIRECTION('',(-1.,0.,0.)); +#87182 = ADVANCED_FACE('',(#87183),#87195,.T.); +#87183 = FACE_BOUND('',#87184,.T.); +#87184 = EDGE_LOOP('',(#87185,#87186,#87187,#87194)); +#87185 = ORIENTED_EDGE('',*,*,#87144,.T.); +#87186 = ORIENTED_EDGE('',*,*,#83504,.F.); +#87187 = ORIENTED_EDGE('',*,*,#87188,.F.); +#87188 = EDGE_CURVE('',#81254,#83497,#87189,.T.); +#87189 = CIRCLE('',#87190,3.E-02); +#87190 = AXIS2_PLACEMENT_3D('',#87191,#87192,#87193); +#87191 = CARTESIAN_POINT('',(-4.2,-1.43,1.05)); +#87192 = DIRECTION('',(7.228014483237E-15,7.228014483237E-15,1.)); +#87193 = DIRECTION('',(1.,0.,-7.228014483237E-15)); +#87194 = ORIENTED_EDGE('',*,*,#81987,.F.); +#87195 = TOROIDAL_SURFACE('',#87196,0.73,3.E-02); +#87196 = AXIS2_PLACEMENT_3D('',#87197,#87198,#87199); +#87197 = CARTESIAN_POINT('',(-3.47,-1.43,1.05)); +#87198 = DIRECTION('',(-3.136121986528E-16,-1.,0.)); +#87199 = DIRECTION('',(1.,-3.136121986528E-16,0.)); +#87200 = ADVANCED_FACE('',(#87201),#87213,.T.); +#87201 = FACE_BOUND('',#87202,.T.); +#87202 = EDGE_LOOP('',(#87203,#87204,#87205,#87212)); +#87203 = ORIENTED_EDGE('',*,*,#87170,.T.); +#87204 = ORIENTED_EDGE('',*,*,#81720,.F.); +#87205 = ORIENTED_EDGE('',*,*,#87206,.F.); +#87206 = EDGE_CURVE('',#83561,#81712,#87207,.T.); +#87207 = CIRCLE('',#87208,3.E-02); +#87208 = AXIS2_PLACEMENT_3D('',#87209,#87210,#87211); +#87209 = CARTESIAN_POINT('',(-1.87,0.5,0.32)); +#87210 = DIRECTION('',(0.,1.,-0.)); +#87211 = DIRECTION('',(0.,0.,1.)); +#87212 = ORIENTED_EDGE('',*,*,#83577,.F.); +#87213 = CYLINDRICAL_SURFACE('',#87214,3.E-02); +#87214 = AXIS2_PLACEMENT_3D('',#87215,#87216,#87217); +#87215 = CARTESIAN_POINT('',(-1.87,2.6,0.32)); +#87216 = DIRECTION('',(-5.421010862428E-16,-1.,0.)); +#87217 = DIRECTION('',(1.,-5.421010862428E-16,0.)); +#87218 = ADVANCED_FACE('',(#87219),#87231,.T.); +#87219 = FACE_BOUND('',#87220,.T.); +#87220 = EDGE_LOOP('',(#87221,#87222,#87223,#87230)); +#87221 = ORIENTED_EDGE('',*,*,#87188,.T.); +#87222 = ORIENTED_EDGE('',*,*,#83496,.F.); +#87223 = ORIENTED_EDGE('',*,*,#87224,.F.); +#87224 = EDGE_CURVE('',#81262,#83489,#87225,.T.); +#87225 = CIRCLE('',#87226,3.E-02); +#87226 = AXIS2_PLACEMENT_3D('',#87227,#87228,#87229); +#87227 = CARTESIAN_POINT('',(-4.2,-1.43,1.25)); +#87228 = DIRECTION('',(0.,0.,1.)); +#87229 = DIRECTION('',(1.,0.,-0.)); +#87230 = ORIENTED_EDGE('',*,*,#81261,.F.); +#87231 = CYLINDRICAL_SURFACE('',#87232,3.E-02); +#87232 = AXIS2_PLACEMENT_3D('',#87233,#87234,#87235); +#87233 = CARTESIAN_POINT('',(-4.2,-1.43,0.)); +#87234 = DIRECTION('',(0.,0.,1.)); +#87235 = DIRECTION('',(1.,0.,-0.)); +#87236 = ADVANCED_FACE('',(#87237),#87249,.T.); +#87237 = FACE_BOUND('',#87238,.T.); +#87238 = EDGE_LOOP('',(#87239,#87240,#87241,#87248)); +#87239 = ORIENTED_EDGE('',*,*,#87206,.T.); +#87240 = ORIENTED_EDGE('',*,*,#81711,.F.); +#87241 = ORIENTED_EDGE('',*,*,#87242,.F.); +#87242 = EDGE_CURVE('',#83592,#81704,#87243,.T.); +#87243 = CIRCLE('',#87244,3.E-02); +#87244 = AXIS2_PLACEMENT_3D('',#87245,#87246,#87247); +#87245 = CARTESIAN_POINT('',(-2.2,0.83,0.32)); +#87246 = DIRECTION('',(-1.,0.,0.)); +#87247 = DIRECTION('',(0.,0.,1.)); +#87248 = ORIENTED_EDGE('',*,*,#83591,.F.); +#87249 = TOROIDAL_SURFACE('',#87250,0.33,3.E-02); +#87250 = AXIS2_PLACEMENT_3D('',#87251,#87252,#87253); +#87251 = CARTESIAN_POINT('',(-2.2,0.5,0.32)); +#87252 = DIRECTION('',(0.,0.,-1.)); +#87253 = DIRECTION('',(-1.,0.,0.)); +#87254 = ADVANCED_FACE('',(#87255),#87267,.T.); +#87255 = FACE_BOUND('',#87256,.T.); +#87256 = EDGE_LOOP('',(#87257,#87258,#87259,#87266)); +#87257 = ORIENTED_EDGE('',*,*,#87224,.T.); +#87258 = ORIENTED_EDGE('',*,*,#84628,.F.); +#87259 = ORIENTED_EDGE('',*,*,#87260,.F.); +#87260 = EDGE_CURVE('',#81270,#84629,#87261,.T.); +#87261 = CIRCLE('',#87262,3.E-02); +#87262 = AXIS2_PLACEMENT_3D('',#87263,#87264,#87265); +#87263 = CARTESIAN_POINT('',(-4.2,-1.2,1.48)); +#87264 = DIRECTION('',(-0.,1.,0.)); +#87265 = DIRECTION('',(0.,0.,1.)); +#87266 = ORIENTED_EDGE('',*,*,#81269,.F.); +#87267 = TOROIDAL_SURFACE('',#87268,0.23,3.E-02); +#87268 = AXIS2_PLACEMENT_3D('',#87269,#87270,#87271); +#87269 = CARTESIAN_POINT('',(-4.2,-1.2,1.25)); +#87270 = DIRECTION('',(-1.,0.,0.)); +#87271 = DIRECTION('',(0.,0.,1.)); +#87272 = ADVANCED_FACE('',(#87273),#87285,.T.); +#87273 = FACE_BOUND('',#87274,.T.); +#87274 = EDGE_LOOP('',(#87275,#87276,#87277,#87284)); +#87275 = ORIENTED_EDGE('',*,*,#87242,.T.); +#87276 = ORIENTED_EDGE('',*,*,#81703,.F.); +#87277 = ORIENTED_EDGE('',*,*,#87278,.F.); +#87278 = EDGE_CURVE('',#83626,#81696,#87279,.T.); +#87279 = CIRCLE('',#87280,3.E-02); +#87280 = AXIS2_PLACEMENT_3D('',#87281,#87282,#87283); +#87281 = CARTESIAN_POINT('',(-3.47,0.83,0.32)); +#87282 = DIRECTION('',(-1.,0.,0.)); +#87283 = DIRECTION('',(0.,0.,1.)); +#87284 = ORIENTED_EDGE('',*,*,#83625,.F.); +#87285 = CYLINDRICAL_SURFACE('',#87286,3.E-02); +#87286 = AXIS2_PLACEMENT_3D('',#87287,#87288,#87289); +#87287 = CARTESIAN_POINT('',(0.,0.83,0.32)); +#87288 = DIRECTION('',(1.,-0.,0.)); +#87289 = DIRECTION('',(0.,0.,-1.)); +#87290 = ADVANCED_FACE('',(#87291),#87303,.T.); +#87291 = FACE_BOUND('',#87292,.T.); +#87292 = EDGE_LOOP('',(#87293,#87294,#87295,#87302)); +#87293 = ORIENTED_EDGE('',*,*,#87260,.T.); +#87294 = ORIENTED_EDGE('',*,*,#84661,.F.); +#87295 = ORIENTED_EDGE('',*,*,#87296,.F.); +#87296 = EDGE_CURVE('',#81279,#83890,#87297,.T.); +#87297 = CIRCLE('',#87298,3.E-02); +#87298 = AXIS2_PLACEMENT_3D('',#87299,#87300,#87301); +#87299 = CARTESIAN_POINT('',(-4.2,-0.97,1.25)); +#87300 = DIRECTION('',(0.,0.,-1.)); +#87301 = DIRECTION('',(-1.,0.,0.)); +#87302 = ORIENTED_EDGE('',*,*,#81278,.F.); +#87303 = TOROIDAL_SURFACE('',#87304,0.23,3.E-02); +#87304 = AXIS2_PLACEMENT_3D('',#87305,#87306,#87307); +#87305 = CARTESIAN_POINT('',(-4.2,-1.2,1.25)); +#87306 = DIRECTION('',(-1.,0.,0.)); +#87307 = DIRECTION('',(0.,0.,1.)); +#87308 = ADVANCED_FACE('',(#87309),#87321,.T.); +#87309 = FACE_BOUND('',#87310,.T.); +#87310 = EDGE_LOOP('',(#87311,#87312,#87313,#87320)); +#87311 = ORIENTED_EDGE('',*,*,#87278,.T.); +#87312 = ORIENTED_EDGE('',*,*,#82973,.F.); +#87313 = ORIENTED_EDGE('',*,*,#87314,.F.); +#87314 = EDGE_CURVE('',#83634,#81374,#87315,.T.); +#87315 = CIRCLE('',#87316,3.E-02); +#87316 = AXIS2_PLACEMENT_3D('',#87317,#87318,#87319); +#87317 = CARTESIAN_POINT('',(-4.2,0.83,1.05)); +#87318 = DIRECTION('',(7.228014483237E-15,0.,1.)); +#87319 = DIRECTION('',(1.,0.,-7.228014483237E-15)); +#87320 = ORIENTED_EDGE('',*,*,#83633,.F.); +#87321 = TOROIDAL_SURFACE('',#87322,0.73,3.E-02); +#87322 = AXIS2_PLACEMENT_3D('',#87323,#87324,#87325); +#87323 = CARTESIAN_POINT('',(-3.47,0.83,1.05)); +#87324 = DIRECTION('',(0.,1.,0.)); +#87325 = DIRECTION('',(0.,-0.,1.)); +#87326 = ADVANCED_FACE('',(#87327),#87339,.T.); +#87327 = FACE_BOUND('',#87328,.T.); +#87328 = EDGE_LOOP('',(#87329,#87330,#87331,#87338)); +#87329 = ORIENTED_EDGE('',*,*,#87296,.T.); +#87330 = ORIENTED_EDGE('',*,*,#83915,.F.); +#87331 = ORIENTED_EDGE('',*,*,#87332,.F.); +#87332 = EDGE_CURVE('',#81288,#83908,#87333,.T.); +#87333 = CIRCLE('',#87334,3.E-02); +#87334 = AXIS2_PLACEMENT_3D('',#87335,#87336,#87337); +#87335 = CARTESIAN_POINT('',(-4.2,-0.97,0.338402894381)); +#87336 = DIRECTION('',(0.,0.,-1.)); +#87337 = DIRECTION('',(-1.,0.,0.)); +#87338 = ORIENTED_EDGE('',*,*,#81287,.F.); +#87339 = CYLINDRICAL_SURFACE('',#87340,3.E-02); +#87340 = AXIS2_PLACEMENT_3D('',#87341,#87342,#87343); +#87341 = CARTESIAN_POINT('',(-4.2,-0.97,-0.85)); +#87342 = DIRECTION('',(0.,0.,1.)); +#87343 = DIRECTION('',(1.,0.,-0.)); +#87344 = ADVANCED_FACE('',(#87345),#87357,.T.); +#87345 = FACE_BOUND('',#87346,.T.); +#87346 = EDGE_LOOP('',(#87347,#87348,#87349,#87356)); +#87347 = ORIENTED_EDGE('',*,*,#87314,.T.); +#87348 = ORIENTED_EDGE('',*,*,#81373,.F.); +#87349 = ORIENTED_EDGE('',*,*,#87350,.F.); +#87350 = EDGE_CURVE('',#83643,#81365,#87351,.T.); +#87351 = CIRCLE('',#87352,3.E-02); +#87352 = AXIS2_PLACEMENT_3D('',#87353,#87354,#87355); +#87353 = CARTESIAN_POINT('',(-4.2,0.83,1.25)); +#87354 = DIRECTION('',(-0.,0.,1.)); +#87355 = DIRECTION('',(1.,0.,0.)); +#87356 = ORIENTED_EDGE('',*,*,#83642,.F.); +#87357 = CYLINDRICAL_SURFACE('',#87358,3.E-02); +#87358 = AXIS2_PLACEMENT_3D('',#87359,#87360,#87361); +#87359 = CARTESIAN_POINT('',(-4.2,0.83,0.)); +#87360 = DIRECTION('',(0.,0.,-1.)); +#87361 = DIRECTION('',(-1.,0.,0.)); +#87362 = ADVANCED_FACE('',(#87363),#87375,.T.); +#87363 = FACE_BOUND('',#87364,.T.); +#87364 = EDGE_LOOP('',(#87365,#87366,#87367,#87374)); +#87365 = ORIENTED_EDGE('',*,*,#87332,.T.); +#87366 = ORIENTED_EDGE('',*,*,#84388,.F.); +#87367 = ORIENTED_EDGE('',*,*,#87368,.F.); +#87368 = EDGE_CURVE('',#81296,#84300,#87369,.T.); +#87369 = CIRCLE('',#87370,3.E-02); +#87370 = AXIS2_PLACEMENT_3D('',#87371,#87372,#87373); +#87371 = CARTESIAN_POINT('',(-4.2,-0.923941410033,0.272624410926)); +#87372 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#87373 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#87374 = ORIENTED_EDGE('',*,*,#81295,.F.); +#87375 = TOROIDAL_SURFACE('',#87376,7.E-02,3.E-02); +#87376 = AXIS2_PLACEMENT_3D('',#87377,#87378,#87379); +#87377 = CARTESIAN_POINT('',(-4.2,-0.9,0.338402894381)); +#87378 = DIRECTION('',(-1.,0.,0.)); +#87379 = DIRECTION('',(0.,0.,1.)); +#87380 = ADVANCED_FACE('',(#87381),#87393,.T.); +#87381 = FACE_BOUND('',#87382,.T.); +#87382 = EDGE_LOOP('',(#87383,#87384,#87385,#87392)); +#87383 = ORIENTED_EDGE('',*,*,#87350,.T.); +#87384 = ORIENTED_EDGE('',*,*,#81364,.F.); +#87385 = ORIENTED_EDGE('',*,*,#87386,.F.); +#87386 = EDGE_CURVE('',#84572,#81356,#87387,.T.); +#87387 = CIRCLE('',#87388,3.E-02); +#87388 = AXIS2_PLACEMENT_3D('',#87389,#87390,#87391); +#87389 = CARTESIAN_POINT('',(-4.2,0.6,1.48)); +#87390 = DIRECTION('',(0.,-1.,0.)); +#87391 = DIRECTION('',(0.,0.,-1.)); +#87392 = ORIENTED_EDGE('',*,*,#84571,.F.); +#87393 = TOROIDAL_SURFACE('',#87394,0.23,3.E-02); +#87394 = AXIS2_PLACEMENT_3D('',#87395,#87396,#87397); +#87395 = CARTESIAN_POINT('',(-4.2,0.6,1.25)); +#87396 = DIRECTION('',(-1.,0.,0.)); +#87397 = DIRECTION('',(0.,0.,1.)); +#87398 = ADVANCED_FACE('',(#87399),#87411,.T.); +#87399 = FACE_BOUND('',#87400,.T.); +#87400 = EDGE_LOOP('',(#87401,#87402,#87403,#87410)); +#87401 = ORIENTED_EDGE('',*,*,#87368,.T.); +#87402 = ORIENTED_EDGE('',*,*,#84325,.F.); +#87403 = ORIENTED_EDGE('',*,*,#87404,.F.); +#87404 = EDGE_CURVE('',#81305,#84318,#87405,.T.); +#87405 = CIRCLE('',#87406,3.E-02); +#87406 = AXIS2_PLACEMENT_3D('',#87407,#87408,#87409); +#87407 = CARTESIAN_POINT('',(-4.2,-0.455537381368,0.102139286881)); +#87408 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#87409 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#87410 = ORIENTED_EDGE('',*,*,#81304,.F.); +#87411 = CYLINDRICAL_SURFACE('',#87412,3.E-02); +#87412 = AXIS2_PLACEMENT_3D('',#87413,#87414,#87415); +#87413 = CARTESIAN_POINT('',(-4.2,2.27539695922,-0.891839524828)); +#87414 = DIRECTION('',(0.,0.939692620786,-0.342020143326)); +#87415 = DIRECTION('',(0.,0.342020143326,0.939692620786)); +#87416 = ADVANCED_FACE('',(#87417),#87429,.T.); +#87417 = FACE_BOUND('',#87418,.T.); +#87418 = EDGE_LOOP('',(#87419,#87420,#87421,#87428)); +#87419 = ORIENTED_EDGE('',*,*,#87386,.T.); +#87420 = ORIENTED_EDGE('',*,*,#81355,.F.); +#87421 = ORIENTED_EDGE('',*,*,#87422,.F.); +#87422 = EDGE_CURVE('',#83868,#81348,#87423,.T.); +#87423 = CIRCLE('',#87424,3.E-02); +#87424 = AXIS2_PLACEMENT_3D('',#87425,#87426,#87427); +#87425 = CARTESIAN_POINT('',(-4.2,0.37,1.25)); +#87426 = DIRECTION('',(0.,0.,-1.)); +#87427 = DIRECTION('',(-1.,0.,0.)); +#87428 = ORIENTED_EDGE('',*,*,#84604,.F.); +#87429 = TOROIDAL_SURFACE('',#87430,0.23,3.E-02); +#87430 = AXIS2_PLACEMENT_3D('',#87431,#87432,#87433); +#87431 = CARTESIAN_POINT('',(-4.2,0.6,1.25)); +#87432 = DIRECTION('',(-1.,0.,0.)); +#87433 = DIRECTION('',(0.,0.,1.)); +#87434 = ADVANCED_FACE('',(#87435),#87447,.T.); +#87435 = FACE_BOUND('',#87436,.T.); +#87436 = EDGE_LOOP('',(#87437,#87438,#87439,#87446)); +#87437 = ORIENTED_EDGE('',*,*,#87404,.T.); +#87438 = ORIENTED_EDGE('',*,*,#84403,.F.); +#87439 = ORIENTED_EDGE('',*,*,#87440,.F.); +#87440 = EDGE_CURVE('',#81313,#84010,#87441,.T.); +#87441 = CIRCLE('',#87442,3.E-02); +#87442 = AXIS2_PLACEMENT_3D('',#87443,#87444,#87445); +#87443 = CARTESIAN_POINT('',(-4.2,-0.37,-2.002075382097E-02)); +#87444 = DIRECTION('',(0.,2.258754526011E-16,-1.)); +#87445 = DIRECTION('',(0.,1.,2.258754526011E-16)); +#87446 = ORIENTED_EDGE('',*,*,#81312,.F.); +#87447 = TOROIDAL_SURFACE('',#87448,0.13,3.E-02); +#87448 = AXIS2_PLACEMENT_3D('',#87449,#87450,#87451); +#87449 = CARTESIAN_POINT('',(-4.2,-0.5,-2.002075382097E-02)); +#87450 = DIRECTION('',(-1.,0.,0.)); +#87451 = DIRECTION('',(0.,0.,1.)); +#87452 = ADVANCED_FACE('',(#87453),#87465,.T.); +#87453 = FACE_BOUND('',#87454,.T.); +#87454 = EDGE_LOOP('',(#87455,#87456,#87457,#87464)); +#87455 = ORIENTED_EDGE('',*,*,#87422,.T.); +#87456 = ORIENTED_EDGE('',*,*,#81347,.F.); +#87457 = ORIENTED_EDGE('',*,*,#87458,.F.); +#87458 = EDGE_CURVE('',#83850,#81339,#87459,.T.); +#87459 = CIRCLE('',#87460,3.E-02); +#87460 = AXIS2_PLACEMENT_3D('',#87461,#87462,#87463); +#87461 = CARTESIAN_POINT('',(-4.2,0.37,-0.45)); +#87462 = DIRECTION('',(0.,0.,-1.)); +#87463 = DIRECTION('',(-1.,0.,0.)); +#87464 = ORIENTED_EDGE('',*,*,#83875,.F.); +#87465 = CYLINDRICAL_SURFACE('',#87466,3.E-02); +#87466 = AXIS2_PLACEMENT_3D('',#87467,#87468,#87469); +#87467 = CARTESIAN_POINT('',(-4.2,0.37,0.)); +#87468 = DIRECTION('',(0.,0.,1.)); +#87469 = DIRECTION('',(1.,0.,-0.)); +#87470 = ADVANCED_FACE('',(#87471),#87483,.T.); +#87471 = FACE_BOUND('',#87472,.T.); +#87472 = EDGE_LOOP('',(#87473,#87474,#87475,#87482)); +#87473 = ORIENTED_EDGE('',*,*,#87440,.T.); +#87474 = ORIENTED_EDGE('',*,*,#84035,.F.); +#87475 = ORIENTED_EDGE('',*,*,#87476,.F.); +#87476 = EDGE_CURVE('',#81322,#84028,#87477,.T.); +#87477 = CIRCLE('',#87478,3.E-02); +#87478 = AXIS2_PLACEMENT_3D('',#87479,#87480,#87481); +#87479 = CARTESIAN_POINT('',(-4.2,-0.37,-0.45)); +#87480 = DIRECTION('',(0.,0.,-1.)); +#87481 = DIRECTION('',(-1.,0.,0.)); +#87482 = ORIENTED_EDGE('',*,*,#81321,.F.); +#87483 = CYLINDRICAL_SURFACE('',#87484,3.E-02); +#87484 = AXIS2_PLACEMENT_3D('',#87485,#87486,#87487); +#87485 = CARTESIAN_POINT('',(-4.2,-0.37,-5.366800753803E-16)); +#87486 = DIRECTION('',(0.,1.807003620809E-16,-1.)); +#87487 = DIRECTION('',(0.,1.,1.807003620809E-16)); +#87488 = ADVANCED_FACE('',(#87489),#87501,.T.); +#87489 = FACE_BOUND('',#87490,.T.); +#87490 = EDGE_LOOP('',(#87491,#87492,#87493,#87500)); +#87491 = ORIENTED_EDGE('',*,*,#87458,.T.); +#87492 = ORIENTED_EDGE('',*,*,#81338,.F.); +#87493 = ORIENTED_EDGE('',*,*,#87494,.F.); +#87494 = EDGE_CURVE('',#84092,#81330,#87495,.T.); +#87495 = CIRCLE('',#87496,3.E-02); +#87496 = AXIS2_PLACEMENT_3D('',#87497,#87498,#87499); +#87497 = CARTESIAN_POINT('',(-4.2,0.,-0.82)); +#87498 = DIRECTION('',(-4.517509052023E-17,-1.,0.)); +#87499 = DIRECTION('',(1.,-4.517509052023E-17,0.)); +#87500 = ORIENTED_EDGE('',*,*,#84107,.F.); +#87501 = TOROIDAL_SURFACE('',#87502,0.37,3.E-02); +#87502 = AXIS2_PLACEMENT_3D('',#87503,#87504,#87505); +#87503 = CARTESIAN_POINT('',(-4.2,0.,-0.45)); +#87504 = DIRECTION('',(-1.,0.,0.)); +#87505 = DIRECTION('',(0.,0.,1.)); +#87506 = ADVANCED_FACE('',(#87507),#87513,.T.); +#87507 = FACE_BOUND('',#87508,.T.); +#87508 = EDGE_LOOP('',(#87509,#87510,#87511,#87512)); +#87509 = ORIENTED_EDGE('',*,*,#87476,.T.); +#87510 = ORIENTED_EDGE('',*,*,#84131,.F.); +#87511 = ORIENTED_EDGE('',*,*,#87494,.T.); +#87512 = ORIENTED_EDGE('',*,*,#81329,.F.); +#87513 = TOROIDAL_SURFACE('',#87514,0.37,3.E-02); +#87514 = AXIS2_PLACEMENT_3D('',#87515,#87516,#87517); +#87515 = CARTESIAN_POINT('',(-4.2,-1.807003620809E-17,-0.45)); +#87516 = DIRECTION('',(-1.,0.,0.)); +#87517 = DIRECTION('',(0.,0.,1.)); +#87518 = ADVANCED_FACE('',(#87519),#87537,.T.); +#87519 = FACE_BOUND('',#87520,.T.); +#87520 = EDGE_LOOP('',(#87521,#87528,#87529,#87536)); +#87521 = ORIENTED_EDGE('',*,*,#87522,.F.); +#87522 = EDGE_CURVE('',#82399,#81760,#87523,.T.); +#87523 = CIRCLE('',#87524,3.E-02); +#87524 = AXIS2_PLACEMENT_3D('',#87525,#87526,#87527); +#87525 = CARTESIAN_POINT('',(1.235016269382,-4.67,3.22)); +#87526 = DIRECTION('',(1.,0.,0.)); +#87527 = DIRECTION('',(0.,-0.,-1.)); +#87528 = ORIENTED_EDGE('',*,*,#82398,.F.); +#87529 = ORIENTED_EDGE('',*,*,#87530,.F.); +#87530 = EDGE_CURVE('',#81770,#82391,#87531,.T.); +#87531 = CIRCLE('',#87532,3.E-02); +#87532 = AXIS2_PLACEMENT_3D('',#87533,#87534,#87535); +#87533 = CARTESIAN_POINT('',(-1.235016269382,-4.67,3.22)); +#87534 = DIRECTION('',(-1.,0.,0.)); +#87535 = DIRECTION('',(0.,0.,1.)); +#87536 = ORIENTED_EDGE('',*,*,#81769,.F.); +#87537 = CYLINDRICAL_SURFACE('',#87538,3.E-02); +#87538 = AXIS2_PLACEMENT_3D('',#87539,#87540,#87541); +#87539 = CARTESIAN_POINT('',(0.,-4.67,3.22)); +#87540 = DIRECTION('',(1.,-0.,0.)); +#87541 = DIRECTION('',(0.,0.,-1.)); +#87542 = ADVANCED_FACE('',(#87543),#87555,.T.); +#87543 = FACE_BOUND('',#87544,.T.); +#87544 = EDGE_LOOP('',(#87545,#87546,#87547,#87554)); +#87545 = ORIENTED_EDGE('',*,*,#87530,.T.); +#87546 = ORIENTED_EDGE('',*,*,#85246,.F.); +#87547 = ORIENTED_EDGE('',*,*,#87548,.F.); +#87548 = EDGE_CURVE('',#85058,#85109,#87549,.T.); +#87549 = CIRCLE('',#87550,3.E-02); +#87550 = AXIS2_PLACEMENT_3D('',#87551,#87552,#87553); +#87551 = CARTESIAN_POINT('',(-1.515941212258,-4.67,3.090792808179)); +#87552 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87553 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#87554 = ORIENTED_EDGE('',*,*,#85222,.F.); +#87555 = TOROIDAL_SURFACE('',#87556,0.37,3.E-02); +#87556 = AXIS2_PLACEMENT_3D('',#87557,#87558,#87559); +#87557 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.85)); +#87558 = DIRECTION('',(0.,1.,-0.)); +#87559 = DIRECTION('',(0.,0.,1.)); +#87560 = ADVANCED_FACE('',(#87561),#87573,.T.); +#87561 = FACE_BOUND('',#87562,.T.); +#87562 = EDGE_LOOP('',(#87563,#87564,#87565,#87572)); +#87563 = ORIENTED_EDGE('',*,*,#87522,.T.); +#87564 = ORIENTED_EDGE('',*,*,#85506,.F.); +#87565 = ORIENTED_EDGE('',*,*,#87566,.F.); +#87566 = EDGE_CURVE('',#85467,#85320,#87567,.T.); +#87567 = CIRCLE('',#87568,3.E-02); +#87568 = AXIS2_PLACEMENT_3D('',#87569,#87570,#87571); +#87569 = CARTESIAN_POINT('',(1.515941212258,-4.67,3.090792808179)); +#87570 = DIRECTION('',(0.650791373456,4.703929472905E-15,-0.759256602365 + )); +#87571 = DIRECTION('',(-0.759256602365,-2.213120273069E-29, + -0.650791373456)); +#87572 = ORIENTED_EDGE('',*,*,#85612,.F.); +#87573 = TOROIDAL_SURFACE('',#87574,0.37,3.E-02); +#87574 = AXIS2_PLACEMENT_3D('',#87575,#87576,#87577); +#87575 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.85)); +#87576 = DIRECTION('',(0.,-1.,0.)); +#87577 = DIRECTION('',(0.,0.,-1.)); +#87578 = ADVANCED_FACE('',(#87579),#87591,.T.); +#87579 = FACE_BOUND('',#87580,.T.); +#87580 = EDGE_LOOP('',(#87581,#87582,#87583,#87590)); +#87581 = ORIENTED_EDGE('',*,*,#87548,.T.); +#87582 = ORIENTED_EDGE('',*,*,#85108,.F.); +#87583 = ORIENTED_EDGE('',*,*,#87584,.F.); +#87584 = EDGE_CURVE('',#85068,#85100,#87585,.T.); +#87585 = CIRCLE('',#87586,3.E-02); +#87586 = AXIS2_PLACEMENT_3D('',#87587,#87588,#87589); +#87587 = CARTESIAN_POINT('',(-2.145873380247,-4.67,2.355871945524)); +#87588 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87589 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#87590 = ORIENTED_EDGE('',*,*,#85067,.F.); +#87591 = CYLINDRICAL_SURFACE('',#87592,3.E-02); +#87592 = AXIS2_PLACEMENT_3D('',#87593,#87594,#87595); +#87593 = CARTESIAN_POINT('',(-1.515941212258,-4.67,3.090792808179)); +#87594 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87595 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#87596 = ADVANCED_FACE('',(#87597),#87609,.T.); +#87597 = FACE_BOUND('',#87598,.T.); +#87598 = EDGE_LOOP('',(#87599,#87600,#87601,#87608)); +#87599 = ORIENTED_EDGE('',*,*,#87566,.T.); +#87600 = ORIENTED_EDGE('',*,*,#85319,.F.); +#87601 = ORIENTED_EDGE('',*,*,#87602,.F.); +#87602 = EDGE_CURVE('',#85475,#85312,#87603,.T.); +#87603 = CIRCLE('',#87604,3.E-02); +#87604 = AXIS2_PLACEMENT_3D('',#87605,#87606,#87607); +#87605 = CARTESIAN_POINT('',(2.145873380247,-4.67,2.355871945524)); +#87606 = DIRECTION('',(0.650791373456,1.097583543678E-14,-0.759256602365 + )); +#87607 = DIRECTION('',(-0.759256602365,-1.060012971946E-30, + -0.650791373456)); +#87608 = ORIENTED_EDGE('',*,*,#85474,.F.); +#87609 = CYLINDRICAL_SURFACE('',#87610,3.E-02); +#87610 = AXIS2_PLACEMENT_3D('',#87611,#87612,#87613); +#87611 = CARTESIAN_POINT('',(1.515941212258,-4.67,3.090792808179)); +#87612 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#87613 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#87614 = ADVANCED_FACE('',(#87615),#87627,.T.); +#87615 = FACE_BOUND('',#87616,.T.); +#87616 = EDGE_LOOP('',(#87617,#87618,#87619,#87626)); +#87617 = ORIENTED_EDGE('',*,*,#87584,.T.); +#87618 = ORIENTED_EDGE('',*,*,#85097,.F.); +#87619 = ORIENTED_EDGE('',*,*,#87620,.F.); +#87620 = EDGE_CURVE('',#85279,#85098,#87621,.T.); +#87621 = CIRCLE('',#87622,3.E-02); +#87622 = AXIS2_PLACEMENT_3D('',#87623,#87624,#87625); +#87623 = CARTESIAN_POINT('',(-2.32158705108,-4.4,2.150872662886)); +#87624 = DIRECTION('',(0.,1.,0.)); +#87625 = DIRECTION('',(0.,-0.,1.)); +#87626 = ORIENTED_EDGE('',*,*,#85963,.F.); +#87627 = TOROIDAL_SURFACE('',#87628,0.27,3.E-02); +#87628 = AXIS2_PLACEMENT_3D('',#87629,#87630,#87631); +#87629 = CARTESIAN_POINT('',(-2.145873380247,-4.4,2.355871945524)); +#87630 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#87631 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87632 = ADVANCED_FACE('',(#87633),#87645,.T.); +#87633 = FACE_BOUND('',#87634,.T.); +#87634 = EDGE_LOOP('',(#87635,#87636,#87637,#87644)); +#87635 = ORIENTED_EDGE('',*,*,#87602,.T.); +#87636 = ORIENTED_EDGE('',*,*,#85939,.F.); +#87637 = ORIENTED_EDGE('',*,*,#87638,.F.); +#87638 = EDGE_CURVE('',#85483,#85639,#87639,.T.); +#87639 = CIRCLE('',#87640,3.E-02); +#87640 = AXIS2_PLACEMENT_3D('',#87641,#87642,#87643); +#87641 = CARTESIAN_POINT('',(2.32158705108,-4.4,2.150872662886)); +#87642 = DIRECTION('',(-0.,1.,0.)); +#87643 = DIRECTION('',(0.,0.,1.)); +#87644 = ORIENTED_EDGE('',*,*,#85482,.F.); +#87645 = TOROIDAL_SURFACE('',#87646,0.27,3.E-02); +#87646 = AXIS2_PLACEMENT_3D('',#87647,#87648,#87649); +#87647 = CARTESIAN_POINT('',(2.145873380247,-4.4,2.355871945524)); +#87648 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#87649 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#87650 = ADVANCED_FACE('',(#87651),#87663,.T.); +#87651 = FACE_BOUND('',#87652,.T.); +#87652 = EDGE_LOOP('',(#87653,#87654,#87655,#87662)); +#87653 = ORIENTED_EDGE('',*,*,#87620,.T.); +#87654 = ORIENTED_EDGE('',*,*,#85141,.F.); +#87655 = ORIENTED_EDGE('',*,*,#87656,.F.); +#87656 = EDGE_CURVE('',#85287,#85133,#87657,.T.); +#87657 = CIRCLE('',#87658,3.E-02); +#87658 = AXIS2_PLACEMENT_3D('',#87659,#87660,#87661); +#87659 = CARTESIAN_POINT('',(-2.32158705108,-4.2,2.150872662886)); +#87660 = DIRECTION('',(0.,1.,0.)); +#87661 = DIRECTION('',(0.,-0.,1.)); +#87662 = ORIENTED_EDGE('',*,*,#85286,.F.); +#87663 = CYLINDRICAL_SURFACE('',#87664,3.E-02); +#87664 = AXIS2_PLACEMENT_3D('',#87665,#87666,#87667); +#87665 = CARTESIAN_POINT('',(-2.32158705108,-4.7,2.150872662886)); +#87666 = DIRECTION('',(0.,1.,0.)); +#87667 = DIRECTION('',(0.,-0.,1.)); +#87668 = ADVANCED_FACE('',(#87669),#87681,.T.); +#87669 = FACE_BOUND('',#87670,.T.); +#87670 = EDGE_LOOP('',(#87671,#87672,#87673,#87680)); +#87671 = ORIENTED_EDGE('',*,*,#87638,.T.); +#87672 = ORIENTED_EDGE('',*,*,#85638,.F.); +#87673 = ORIENTED_EDGE('',*,*,#87674,.F.); +#87674 = EDGE_CURVE('',#85448,#85631,#87675,.T.); +#87675 = CIRCLE('',#87676,3.E-02); +#87676 = AXIS2_PLACEMENT_3D('',#87677,#87678,#87679); +#87677 = CARTESIAN_POINT('',(2.32158705108,-4.2,2.150872662886)); +#87678 = DIRECTION('',(-0.,1.,0.)); +#87679 = DIRECTION('',(0.,0.,1.)); +#87680 = ORIENTED_EDGE('',*,*,#85491,.F.); +#87681 = CYLINDRICAL_SURFACE('',#87682,3.E-02); +#87682 = AXIS2_PLACEMENT_3D('',#87683,#87684,#87685); +#87683 = CARTESIAN_POINT('',(2.32158705108,0.,2.150872662886)); +#87684 = DIRECTION('',(0.,-1.,0.)); +#87685 = DIRECTION('',(0.,0.,-1.)); +#87686 = ADVANCED_FACE('',(#87687),#87699,.T.); +#87687 = FACE_BOUND('',#87688,.T.); +#87688 = EDGE_LOOP('',(#87689,#87690,#87691,#87698)); +#87689 = ORIENTED_EDGE('',*,*,#87656,.T.); +#87690 = ORIENTED_EDGE('',*,*,#85132,.F.); +#87691 = ORIENTED_EDGE('',*,*,#87692,.F.); +#87692 = EDGE_CURVE('',#84962,#85125,#87693,.T.); +#87693 = CIRCLE('',#87694,3.E-02); +#87694 = AXIS2_PLACEMENT_3D('',#87695,#87696,#87697); +#87695 = CARTESIAN_POINT('',(-2.145873380247,-3.93,2.355871945524)); +#87696 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#87697 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#87698 = ORIENTED_EDGE('',*,*,#85987,.F.); +#87699 = TOROIDAL_SURFACE('',#87700,0.27,3.E-02); +#87700 = AXIS2_PLACEMENT_3D('',#87701,#87702,#87703); +#87701 = CARTESIAN_POINT('',(-2.145873380247,-4.2,2.355871945524)); +#87702 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#87703 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87704 = ADVANCED_FACE('',(#87705),#87717,.T.); +#87705 = FACE_BOUND('',#87706,.T.); +#87706 = EDGE_LOOP('',(#87707,#87708,#87709,#87716)); +#87707 = ORIENTED_EDGE('',*,*,#87674,.T.); +#87708 = ORIENTED_EDGE('',*,*,#85915,.F.); +#87709 = ORIENTED_EDGE('',*,*,#87710,.F.); +#87710 = EDGE_CURVE('',#85450,#85418,#87711,.T.); +#87711 = CIRCLE('',#87712,3.E-02); +#87712 = AXIS2_PLACEMENT_3D('',#87713,#87714,#87715); +#87713 = CARTESIAN_POINT('',(2.145873380247,-3.93,2.355871945524)); +#87714 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#87715 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#87716 = ORIENTED_EDGE('',*,*,#85447,.F.); +#87717 = TOROIDAL_SURFACE('',#87718,0.27,3.E-02); +#87718 = AXIS2_PLACEMENT_3D('',#87719,#87720,#87721); +#87719 = CARTESIAN_POINT('',(2.145873380247,-4.2,2.355871945524)); +#87720 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#87721 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#87722 = ADVANCED_FACE('',(#87723),#87735,.T.); +#87723 = FACE_BOUND('',#87724,.T.); +#87724 = EDGE_LOOP('',(#87725,#87726,#87727,#87734)); +#87725 = ORIENTED_EDGE('',*,*,#87692,.T.); +#87726 = ORIENTED_EDGE('',*,*,#85124,.F.); +#87727 = ORIENTED_EDGE('',*,*,#87728,.F.); +#87728 = EDGE_CURVE('',#84970,#85117,#87729,.T.); +#87729 = CIRCLE('',#87730,3.E-02); +#87730 = AXIS2_PLACEMENT_3D('',#87731,#87732,#87733); +#87731 = CARTESIAN_POINT('',(-1.515941212258,-3.93,3.090792808179)); +#87732 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#87733 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#87734 = ORIENTED_EDGE('',*,*,#84969,.F.); +#87735 = CYLINDRICAL_SURFACE('',#87736,3.E-02); +#87736 = AXIS2_PLACEMENT_3D('',#87737,#87738,#87739); +#87737 = CARTESIAN_POINT('',(-1.515941212258,-3.93,3.090792808179)); +#87738 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#87739 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#87740 = ADVANCED_FACE('',(#87741),#87753,.T.); +#87741 = FACE_BOUND('',#87742,.T.); +#87742 = EDGE_LOOP('',(#87743,#87744,#87745,#87752)); +#87743 = ORIENTED_EDGE('',*,*,#87710,.T.); +#87744 = ORIENTED_EDGE('',*,*,#85417,.F.); +#87745 = ORIENTED_EDGE('',*,*,#87746,.F.); +#87746 = EDGE_CURVE('',#85459,#85410,#87747,.T.); +#87747 = CIRCLE('',#87748,3.E-02); +#87748 = AXIS2_PLACEMENT_3D('',#87749,#87750,#87751); +#87749 = CARTESIAN_POINT('',(1.515941212258,-3.93,3.090792808179)); +#87750 = DIRECTION('',(-0.650791373456,4.703929472905E-15,0.759256602365 + )); +#87751 = DIRECTION('',(0.759256602365,-2.217127202934E-29,0.650791373456 + )); +#87752 = ORIENTED_EDGE('',*,*,#85458,.F.); +#87753 = CYLINDRICAL_SURFACE('',#87754,3.E-02); +#87754 = AXIS2_PLACEMENT_3D('',#87755,#87756,#87757); +#87755 = CARTESIAN_POINT('',(1.515941212258,-3.93,3.090792808179)); +#87756 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#87757 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#87758 = ADVANCED_FACE('',(#87759),#87771,.T.); +#87759 = FACE_BOUND('',#87760,.T.); +#87760 = EDGE_LOOP('',(#87761,#87762,#87763,#87770)); +#87761 = ORIENTED_EDGE('',*,*,#87728,.T.); +#87762 = ORIENTED_EDGE('',*,*,#85263,.F.); +#87763 = ORIENTED_EDGE('',*,*,#87764,.F.); +#87764 = EDGE_CURVE('',#85157,#85255,#87765,.T.); +#87765 = CIRCLE('',#87766,3.E-02); +#87766 = AXIS2_PLACEMENT_3D('',#87767,#87768,#87769); +#87767 = CARTESIAN_POINT('',(-1.25,-3.93,3.219696480666)); +#87768 = DIRECTION('',(0.999179677476,-0.,4.049656923676E-02)); +#87769 = DIRECTION('',(4.049656923676E-02,0.,-0.999179677476)); +#87770 = ORIENTED_EDGE('',*,*,#85156,.F.); +#87771 = TOROIDAL_SURFACE('',#87772,0.37,3.E-02); +#87772 = AXIS2_PLACEMENT_3D('',#87773,#87774,#87775); +#87773 = CARTESIAN_POINT('',(-1.235016269382,-3.93,2.85)); +#87774 = DIRECTION('',(-0.,-1.,0.)); +#87775 = DIRECTION('',(-0.,0.,-1.)); +#87776 = ADVANCED_FACE('',(#87777),#87789,.T.); +#87777 = FACE_BOUND('',#87778,.T.); +#87778 = EDGE_LOOP('',(#87779,#87780,#87781,#87788)); +#87779 = ORIENTED_EDGE('',*,*,#87746,.T.); +#87780 = ORIENTED_EDGE('',*,*,#85572,.F.); +#87781 = ORIENTED_EDGE('',*,*,#87782,.F.); +#87782 = EDGE_CURVE('',#85596,#85565,#87783,.T.); +#87783 = CIRCLE('',#87784,3.E-02); +#87784 = AXIS2_PLACEMENT_3D('',#87785,#87786,#87787); +#87785 = CARTESIAN_POINT('',(1.25,-3.93,3.219696480666)); +#87786 = DIRECTION('',(-0.999179677476,-5.854195779294E-16, + 4.049656923676E-02)); +#87787 = DIRECTION('',(4.049656923676E-02,-4.352644906792E-33, + 0.999179677476)); +#87788 = ORIENTED_EDGE('',*,*,#85595,.F.); +#87789 = TOROIDAL_SURFACE('',#87790,0.37,3.E-02); +#87790 = AXIS2_PLACEMENT_3D('',#87791,#87792,#87793); +#87791 = CARTESIAN_POINT('',(1.235016269382,-3.93,2.85)); +#87792 = DIRECTION('',(-0.,1.,-0.)); +#87793 = DIRECTION('',(0.,0.,1.)); +#87794 = ADVANCED_FACE('',(#87795),#87807,.T.); +#87795 = FACE_BOUND('',#87796,.T.); +#87796 = EDGE_LOOP('',(#87797,#87798,#87799,#87806)); +#87797 = ORIENTED_EDGE('',*,*,#87764,.T.); +#87798 = ORIENTED_EDGE('',*,*,#85254,.F.); +#87799 = ORIENTED_EDGE('',*,*,#87800,.F.); +#87800 = EDGE_CURVE('',#85890,#82382,#87801,.T.); +#87801 = CIRCLE('',#87802,3.E-02); +#87802 = AXIS2_PLACEMENT_3D('',#87803,#87804,#87805); +#87803 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,3.22)); +#87804 = DIRECTION('',(0.996529282876,8.324294787558E-02,-0.)); +#87805 = DIRECTION('',(-8.324294787558E-02,0.996529282876,0.)); +#87806 = ORIENTED_EDGE('',*,*,#85898,.F.); +#87807 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(3,2,( + (#87808,#87809,#87810) + ,(#87811,#87812,#87813) + ,(#87814,#87815,#87816) + ,(#87817,#87818,#87819 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((4,4),(3,3),( + 0.,1.49998197867E-05),(0.,1.),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,0.707106781187,1.) + ,(1.,0.70750346441,1.) + ,(1.,0.707504518949,1.) +,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#87808 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,3.22)); +#87809 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,3.25)); +#87810 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,3.25)); +#87811 = CARTESIAN_POINT('',(-1.241670151889,-3.89982660465, + 3.220000002463)); +#87812 = CARTESIAN_POINT('',(-1.242069224631,-3.899859935062, + 3.249966356846)); +#87813 = CARTESIAN_POINT('',(-1.240408613682,-3.929791918718,3.25)); +#87814 = CARTESIAN_POINT('',(-1.245832351016,-3.9,3.21989917373)); +#87815 = CARTESIAN_POINT('',(-1.246642947459,-3.900033730728, + 3.249857168576)); +#87816 = CARTESIAN_POINT('',(-1.245808212619,-3.929999995745, + 3.249891002921)); +#87817 = CARTESIAN_POINT('',(-1.25,-3.9,3.219696480666)); +#87818 = CARTESIAN_POINT('',(-1.251214897077,-3.9,3.24967187099)); +#87819 = CARTESIAN_POINT('',(-1.251214897077,-3.93,3.24967187099)); +#87820 = ADVANCED_FACE('',(#87821),#87833,.T.); +#87821 = FACE_BOUND('',#87822,.T.); +#87822 = EDGE_LOOP('',(#87823,#87824,#87825,#87832)); +#87823 = ORIENTED_EDGE('',*,*,#87782,.T.); +#87824 = ORIENTED_EDGE('',*,*,#85814,.F.); +#87825 = ORIENTED_EDGE('',*,*,#87826,.F.); +#87826 = EDGE_CURVE('',#82407,#85815,#87827,.T.); +#87827 = CIRCLE('',#87828,3.E-02); +#87828 = AXIS2_PLACEMENT_3D('',#87829,#87830,#87831); +#87829 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,3.22)); +#87830 = DIRECTION('',(-0.996529282876,8.324294787556E-02,0.)); +#87831 = DIRECTION('',(-8.324294787556E-02,-0.996529282876,0.)); +#87832 = ORIENTED_EDGE('',*,*,#85604,.F.); +#87833 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(3,2,( + (#87834,#87835,#87836) + ,(#87837,#87838,#87839) + ,(#87840,#87841,#87842) + ,(#87843,#87844,#87845 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((4,4),(3,3),( + -6.776263578034E-21,1.499981978669E-05),(0.,1.), +.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE(( + (1.,0.707106781187,1.) + ,(1.,0.70750346441,1.) + ,(1.,0.707504518949,1.) +,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#87834 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,3.25)); +#87835 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,3.25)); +#87836 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,3.22)); +#87837 = CARTESIAN_POINT('',(1.240408613682,-3.929791918718,3.25)); +#87838 = CARTESIAN_POINT('',(1.242069224631,-3.899859935062, + 3.249966356846)); +#87839 = CARTESIAN_POINT('',(1.241670151889,-3.89982660465, + 3.220000002463)); +#87840 = CARTESIAN_POINT('',(1.245808212619,-3.929999995745, + 3.249891002921)); +#87841 = CARTESIAN_POINT('',(1.246642947459,-3.900033730728, + 3.249857168576)); +#87842 = CARTESIAN_POINT('',(1.245832351016,-3.9,3.21989917373)); +#87843 = CARTESIAN_POINT('',(1.251214897077,-3.93,3.24967187099)); +#87844 = CARTESIAN_POINT('',(1.251214897077,-3.9,3.24967187099)); +#87845 = CARTESIAN_POINT('',(1.25,-3.9,3.219696480666)); +#87846 = ADVANCED_FACE('',(#87847),#87859,.T.); +#87847 = FACE_BOUND('',#87848,.T.); +#87848 = EDGE_LOOP('',(#87849,#87850,#87851,#87858)); +#87849 = ORIENTED_EDGE('',*,*,#87800,.T.); +#87850 = ORIENTED_EDGE('',*,*,#82381,.F.); +#87851 = ORIENTED_EDGE('',*,*,#87852,.F.); +#87852 = EDGE_CURVE('',#85850,#82373,#87853,.T.); +#87853 = CIRCLE('',#87854,3.E-02); +#87854 = AXIS2_PLACEMENT_3D('',#87855,#87856,#87857); +#87855 = CARTESIAN_POINT('',(-1.07,-3.75,3.22)); +#87856 = DIRECTION('',(0.,1.,-0.)); +#87857 = DIRECTION('',(0.,0.,1.)); +#87858 = ORIENTED_EDGE('',*,*,#85889,.F.); +#87859 = TOROIDAL_SURFACE('',#87860,0.18,3.E-02); +#87860 = AXIS2_PLACEMENT_3D('',#87861,#87862,#87863); +#87861 = CARTESIAN_POINT('',(-1.25,-3.75,3.22)); +#87862 = DIRECTION('',(0.,0.,-1.)); +#87863 = DIRECTION('',(-1.,0.,0.)); +#87864 = ADVANCED_FACE('',(#87865),#87877,.T.); +#87865 = FACE_BOUND('',#87866,.T.); +#87866 = EDGE_LOOP('',(#87867,#87868,#87869,#87876)); +#87867 = ORIENTED_EDGE('',*,*,#87826,.T.); +#87868 = ORIENTED_EDGE('',*,*,#85823,.F.); +#87869 = ORIENTED_EDGE('',*,*,#87870,.F.); +#87870 = EDGE_CURVE('',#82415,#85774,#87871,.T.); +#87871 = CIRCLE('',#87872,3.E-02); +#87872 = AXIS2_PLACEMENT_3D('',#87873,#87874,#87875); +#87873 = CARTESIAN_POINT('',(1.07,-3.75,3.22)); +#87874 = DIRECTION('',(0.,1.,0.)); +#87875 = DIRECTION('',(0.,-0.,1.)); +#87876 = ORIENTED_EDGE('',*,*,#82414,.F.); +#87877 = TOROIDAL_SURFACE('',#87878,0.18,3.E-02); +#87878 = AXIS2_PLACEMENT_3D('',#87879,#87880,#87881); +#87879 = CARTESIAN_POINT('',(1.25,-3.75,3.22)); +#87880 = DIRECTION('',(0.,0.,-1.)); +#87881 = DIRECTION('',(-1.,0.,0.)); +#87882 = ADVANCED_FACE('',(#87883),#87895,.T.); +#87883 = FACE_BOUND('',#87884,.T.); +#87884 = EDGE_LOOP('',(#87885,#87886,#87887,#87894)); +#87885 = ORIENTED_EDGE('',*,*,#87852,.T.); +#87886 = ORIENTED_EDGE('',*,*,#82372,.F.); +#87887 = ORIENTED_EDGE('',*,*,#87888,.F.); +#87888 = EDGE_CURVE('',#84842,#82365,#87889,.T.); +#87889 = CIRCLE('',#87890,3.E-02); +#87890 = AXIS2_PLACEMENT_3D('',#87891,#87892,#87893); +#87891 = CARTESIAN_POINT('',(-1.25,-3.57,3.22)); +#87892 = DIRECTION('',(-1.,0.,0.)); +#87893 = DIRECTION('',(0.,0.,1.)); +#87894 = ORIENTED_EDGE('',*,*,#85849,.F.); +#87895 = TOROIDAL_SURFACE('',#87896,0.18,3.E-02); +#87896 = AXIS2_PLACEMENT_3D('',#87897,#87898,#87899); +#87897 = CARTESIAN_POINT('',(-1.25,-3.75,3.22)); +#87898 = DIRECTION('',(0.,0.,-1.)); +#87899 = DIRECTION('',(-1.,0.,0.)); +#87900 = ADVANCED_FACE('',(#87901),#87913,.T.); +#87901 = FACE_BOUND('',#87902,.T.); +#87902 = EDGE_LOOP('',(#87903,#87904,#87905,#87912)); +#87903 = ORIENTED_EDGE('',*,*,#87870,.T.); +#87904 = ORIENTED_EDGE('',*,*,#85781,.F.); +#87905 = ORIENTED_EDGE('',*,*,#87906,.F.); +#87906 = EDGE_CURVE('',#82424,#84890,#87907,.T.); +#87907 = CIRCLE('',#87908,3.E-02); +#87908 = AXIS2_PLACEMENT_3D('',#87909,#87910,#87911); +#87909 = CARTESIAN_POINT('',(1.25,-3.57,3.22)); +#87910 = DIRECTION('',(1.,0.,0.)); +#87911 = DIRECTION('',(0.,-0.,-1.)); +#87912 = ORIENTED_EDGE('',*,*,#82423,.F.); +#87913 = TOROIDAL_SURFACE('',#87914,0.18,3.E-02); +#87914 = AXIS2_PLACEMENT_3D('',#87915,#87916,#87917); +#87915 = CARTESIAN_POINT('',(1.25,-3.75,3.22)); +#87916 = DIRECTION('',(0.,0.,-1.)); +#87917 = DIRECTION('',(-1.,0.,0.)); +#87918 = ADVANCED_FACE('',(#87919),#87931,.T.); +#87919 = FACE_BOUND('',#87920,.T.); +#87920 = EDGE_LOOP('',(#87921,#87922,#87923,#87930)); +#87921 = ORIENTED_EDGE('',*,*,#87888,.T.); +#87922 = ORIENTED_EDGE('',*,*,#82364,.F.); +#87923 = ORIENTED_EDGE('',*,*,#87924,.F.); +#87924 = EDGE_CURVE('',#84850,#82356,#87925,.T.); +#87925 = CIRCLE('',#87926,3.E-02); +#87926 = AXIS2_PLACEMENT_3D('',#87927,#87928,#87929); +#87927 = CARTESIAN_POINT('',(-2.95,-3.57,3.22)); +#87928 = DIRECTION('',(-1.,0.,0.)); +#87929 = DIRECTION('',(0.,0.,1.)); +#87930 = ORIENTED_EDGE('',*,*,#84849,.F.); +#87931 = CYLINDRICAL_SURFACE('',#87932,3.E-02); +#87932 = AXIS2_PLACEMENT_3D('',#87933,#87934,#87935); +#87933 = CARTESIAN_POINT('',(-3.1,-3.57,3.22)); +#87934 = DIRECTION('',(-1.,0.,0.)); +#87935 = DIRECTION('',(0.,0.,1.)); +#87936 = ADVANCED_FACE('',(#87937),#87949,.T.); +#87937 = FACE_BOUND('',#87938,.T.); +#87938 = EDGE_LOOP('',(#87939,#87940,#87941,#87948)); +#87939 = ORIENTED_EDGE('',*,*,#87906,.T.); +#87940 = ORIENTED_EDGE('',*,*,#84889,.F.); +#87941 = ORIENTED_EDGE('',*,*,#87942,.F.); +#87942 = EDGE_CURVE('',#82433,#84882,#87943,.T.); +#87943 = CIRCLE('',#87944,3.E-02); +#87944 = AXIS2_PLACEMENT_3D('',#87945,#87946,#87947); +#87945 = CARTESIAN_POINT('',(2.95,-3.57,3.22)); +#87946 = DIRECTION('',(1.,0.,0.)); +#87947 = DIRECTION('',(0.,-0.,-1.)); +#87948 = ORIENTED_EDGE('',*,*,#82432,.F.); +#87949 = CYLINDRICAL_SURFACE('',#87950,3.E-02); +#87950 = AXIS2_PLACEMENT_3D('',#87951,#87952,#87953); +#87951 = CARTESIAN_POINT('',(3.1,-3.57,3.22)); +#87952 = DIRECTION('',(-1.,8.673617379884E-16,0.)); +#87953 = DIRECTION('',(-8.673617379884E-16,-1.,0.)); +#87954 = ADVANCED_FACE('',(#87955),#87967,.T.); +#87955 = FACE_BOUND('',#87956,.T.); +#87956 = EDGE_LOOP('',(#87957,#87958,#87959,#87966)); +#87957 = ORIENTED_EDGE('',*,*,#87924,.T.); +#87958 = ORIENTED_EDGE('',*,*,#82355,.F.); +#87959 = ORIENTED_EDGE('',*,*,#87960,.F.); +#87960 = EDGE_CURVE('',#84802,#82348,#87961,.T.); +#87961 = CIRCLE('',#87962,3.E-02); +#87962 = AXIS2_PLACEMENT_3D('',#87963,#87964,#87965); +#87963 = CARTESIAN_POINT('',(-3.13,-3.75,3.22)); +#87964 = DIRECTION('',(0.,-1.,0.)); +#87965 = DIRECTION('',(0.,0.,-1.)); +#87966 = ORIENTED_EDGE('',*,*,#85724,.F.); +#87967 = TOROIDAL_SURFACE('',#87968,0.18,3.E-02); +#87968 = AXIS2_PLACEMENT_3D('',#87969,#87970,#87971); +#87969 = CARTESIAN_POINT('',(-2.95,-3.75,3.22)); +#87970 = DIRECTION('',(0.,0.,-1.)); +#87971 = DIRECTION('',(-1.,0.,0.)); +#87972 = ADVANCED_FACE('',(#87973),#87985,.T.); +#87973 = FACE_BOUND('',#87974,.T.); +#87974 = EDGE_LOOP('',(#87975,#87976,#87977,#87984)); +#87975 = ORIENTED_EDGE('',*,*,#87942,.T.); +#87976 = ORIENTED_EDGE('',*,*,#85748,.F.); +#87977 = ORIENTED_EDGE('',*,*,#87978,.F.); +#87978 = EDGE_CURVE('',#82441,#84930,#87979,.T.); +#87979 = CIRCLE('',#87980,3.E-02); +#87980 = AXIS2_PLACEMENT_3D('',#87981,#87982,#87983); +#87981 = CARTESIAN_POINT('',(3.13,-3.75,3.22)); +#87982 = DIRECTION('',(0.,-1.,0.)); +#87983 = DIRECTION('',(0.,0.,-1.)); +#87984 = ORIENTED_EDGE('',*,*,#82440,.F.); +#87985 = TOROIDAL_SURFACE('',#87986,0.18,3.E-02); +#87986 = AXIS2_PLACEMENT_3D('',#87987,#87988,#87989); +#87987 = CARTESIAN_POINT('',(2.95,-3.75,3.22)); +#87988 = DIRECTION('',(0.,0.,-1.)); +#87989 = DIRECTION('',(-1.,0.,0.)); +#87990 = ADVANCED_FACE('',(#87991),#88003,.T.); +#87991 = FACE_BOUND('',#87992,.T.); +#87992 = EDGE_LOOP('',(#87993,#87994,#87995,#88002)); +#87993 = ORIENTED_EDGE('',*,*,#87960,.T.); +#87994 = ORIENTED_EDGE('',*,*,#82347,.F.); +#87995 = ORIENTED_EDGE('',*,*,#87996,.F.); +#87996 = EDGE_CURVE('',#84810,#82339,#87997,.T.); +#87997 = CIRCLE('',#87998,3.E-02); +#87998 = AXIS2_PLACEMENT_3D('',#87999,#88000,#88001); +#87999 = CARTESIAN_POINT('',(-3.13,-4.55,3.22)); +#88000 = DIRECTION('',(0.,-1.,0.)); +#88001 = DIRECTION('',(0.,0.,-1.)); +#88002 = ORIENTED_EDGE('',*,*,#84809,.F.); +#88003 = CYLINDRICAL_SURFACE('',#88004,3.E-02); +#88004 = AXIS2_PLACEMENT_3D('',#88005,#88006,#88007); +#88005 = CARTESIAN_POINT('',(-3.13,-4.7,3.22)); +#88006 = DIRECTION('',(0.,-1.,0.)); +#88007 = DIRECTION('',(0.,0.,-1.)); +#88008 = ADVANCED_FACE('',(#88009),#88021,.T.); +#88009 = FACE_BOUND('',#88010,.T.); +#88010 = EDGE_LOOP('',(#88011,#88012,#88013,#88020)); +#88011 = ORIENTED_EDGE('',*,*,#87978,.T.); +#88012 = ORIENTED_EDGE('',*,*,#84929,.F.); +#88013 = ORIENTED_EDGE('',*,*,#88014,.F.); +#88014 = EDGE_CURVE('',#82288,#84922,#88015,.T.); +#88015 = CIRCLE('',#88016,3.E-02); +#88016 = AXIS2_PLACEMENT_3D('',#88017,#88018,#88019); +#88017 = CARTESIAN_POINT('',(3.13,-4.55,3.22)); +#88018 = DIRECTION('',(0.,-1.,0.)); +#88019 = DIRECTION('',(0.,0.,-1.)); +#88020 = ORIENTED_EDGE('',*,*,#82449,.F.); +#88021 = CYLINDRICAL_SURFACE('',#88022,3.E-02); +#88022 = AXIS2_PLACEMENT_3D('',#88023,#88024,#88025); +#88023 = CARTESIAN_POINT('',(3.13,-4.7,3.22)); +#88024 = DIRECTION('',(7.885106708985E-16,1.,0.)); +#88025 = DIRECTION('',(-1.,7.885106708985E-16,0.)); +#88026 = ADVANCED_FACE('',(#88027),#88039,.T.); +#88027 = FACE_BOUND('',#88028,.T.); +#88028 = EDGE_LOOP('',(#88029,#88030,#88031,#88038)); +#88029 = ORIENTED_EDGE('',*,*,#87996,.T.); +#88030 = ORIENTED_EDGE('',*,*,#82338,.F.); +#88031 = ORIENTED_EDGE('',*,*,#88032,.F.); +#88032 = EDGE_CURVE('',#81802,#82331,#88033,.T.); +#88033 = CIRCLE('',#88034,3.E-02); +#88034 = AXIS2_PLACEMENT_3D('',#88035,#88036,#88037); +#88035 = CARTESIAN_POINT('',(-3.25,-4.67,3.22)); +#88036 = DIRECTION('',(-1.,0.,0.)); +#88037 = DIRECTION('',(0.,0.,1.)); +#88038 = ORIENTED_EDGE('',*,*,#85693,.F.); +#88039 = TOROIDAL_SURFACE('',#88040,0.12,3.E-02); +#88040 = AXIS2_PLACEMENT_3D('',#88041,#88042,#88043); +#88041 = CARTESIAN_POINT('',(-3.25,-4.55,3.22)); +#88042 = DIRECTION('',(0.,0.,-1.)); +#88043 = DIRECTION('',(-1.,0.,0.)); +#88044 = ADVANCED_FACE('',(#88045),#88057,.T.); +#88045 = FACE_BOUND('',#88046,.T.); +#88046 = EDGE_LOOP('',(#88047,#88048,#88049,#88056)); +#88047 = ORIENTED_EDGE('',*,*,#88014,.T.); +#88048 = ORIENTED_EDGE('',*,*,#85669,.F.); +#88049 = ORIENTED_EDGE('',*,*,#88050,.F.); +#88050 = EDGE_CURVE('',#82290,#82038,#88051,.T.); +#88051 = CIRCLE('',#88052,3.E-02); +#88052 = AXIS2_PLACEMENT_3D('',#88053,#88054,#88055); +#88053 = CARTESIAN_POINT('',(3.25,-4.67,3.22)); +#88054 = DIRECTION('',(1.,0.,0.)); +#88055 = DIRECTION('',(0.,-0.,-1.)); +#88056 = ORIENTED_EDGE('',*,*,#82287,.F.); +#88057 = TOROIDAL_SURFACE('',#88058,0.12,3.E-02); +#88058 = AXIS2_PLACEMENT_3D('',#88059,#88060,#88061); +#88059 = CARTESIAN_POINT('',(3.25,-4.55,3.22)); +#88060 = DIRECTION('',(0.,0.,-1.)); +#88061 = DIRECTION('',(-1.,0.,0.)); +#88062 = ADVANCED_FACE('',(#88063),#88075,.T.); +#88063 = FACE_BOUND('',#88064,.T.); +#88064 = EDGE_LOOP('',(#88065,#88066,#88067,#88074)); +#88065 = ORIENTED_EDGE('',*,*,#88032,.T.); +#88066 = ORIENTED_EDGE('',*,*,#82330,.F.); +#88067 = ORIENTED_EDGE('',*,*,#88068,.F.); +#88068 = EDGE_CURVE('',#81810,#82323,#88069,.T.); +#88069 = CIRCLE('',#88070,3.E-02); +#88070 = AXIS2_PLACEMENT_3D('',#88071,#88072,#88073); +#88071 = CARTESIAN_POINT('',(-3.47,-4.67,3.22)); +#88072 = DIRECTION('',(-1.,0.,0.)); +#88073 = DIRECTION('',(0.,0.,1.)); +#88074 = ORIENTED_EDGE('',*,*,#81809,.F.); +#88075 = CYLINDRICAL_SURFACE('',#88076,3.E-02); +#88076 = AXIS2_PLACEMENT_3D('',#88077,#88078,#88079); +#88077 = CARTESIAN_POINT('',(0.,-4.67,3.22)); +#88078 = DIRECTION('',(1.,-0.,0.)); +#88079 = DIRECTION('',(0.,0.,-1.)); +#88080 = ADVANCED_FACE('',(#88081),#88093,.T.); +#88081 = FACE_BOUND('',#88082,.T.); +#88082 = EDGE_LOOP('',(#88083,#88084,#88085,#88092)); +#88083 = ORIENTED_EDGE('',*,*,#88050,.T.); +#88084 = ORIENTED_EDGE('',*,*,#82037,.F.); +#88085 = ORIENTED_EDGE('',*,*,#88086,.F.); +#88086 = EDGE_CURVE('',#82299,#82029,#88087,.T.); +#88087 = CIRCLE('',#88088,3.E-02); +#88088 = AXIS2_PLACEMENT_3D('',#88089,#88090,#88091); +#88089 = CARTESIAN_POINT('',(3.47,-4.67,3.22)); +#88090 = DIRECTION('',(1.,0.,0.)); +#88091 = DIRECTION('',(0.,-0.,-1.)); +#88092 = ORIENTED_EDGE('',*,*,#82298,.F.); +#88093 = CYLINDRICAL_SURFACE('',#88094,3.E-02); +#88094 = AXIS2_PLACEMENT_3D('',#88095,#88096,#88097); +#88095 = CARTESIAN_POINT('',(0.,-4.67,3.22)); +#88096 = DIRECTION('',(1.,-0.,0.)); +#88097 = DIRECTION('',(0.,0.,-1.)); +#88098 = ADVANCED_FACE('',(#88099),#88111,.T.); +#88099 = FACE_BOUND('',#88100,.T.); +#88100 = EDGE_LOOP('',(#88101,#88102,#88103,#88110)); +#88101 = ORIENTED_EDGE('',*,*,#88068,.T.); +#88102 = ORIENTED_EDGE('',*,*,#82918,.F.); +#88103 = ORIENTED_EDGE('',*,*,#88104,.F.); +#88104 = EDGE_CURVE('',#81818,#82777,#88105,.T.); +#88105 = CIRCLE('',#88106,3.E-02); +#88106 = AXIS2_PLACEMENT_3D('',#88107,#88108,#88109); +#88107 = CARTESIAN_POINT('',(-4.44,-4.67,2.25)); +#88108 = DIRECTION('',(-0.,0.,-1.)); +#88109 = DIRECTION('',(-1.,0.,0.)); +#88110 = ORIENTED_EDGE('',*,*,#81817,.F.); +#88111 = TOROIDAL_SURFACE('',#88112,0.97,3.E-02); +#88112 = AXIS2_PLACEMENT_3D('',#88113,#88114,#88115); +#88113 = CARTESIAN_POINT('',(-3.47,-4.67,2.25)); +#88114 = DIRECTION('',(0.,1.,0.)); +#88115 = DIRECTION('',(0.,-0.,1.)); +#88116 = ADVANCED_FACE('',(#88117),#88129,.T.); +#88117 = FACE_BOUND('',#88118,.T.); +#88118 = EDGE_LOOP('',(#88119,#88120,#88121,#88128)); +#88119 = ORIENTED_EDGE('',*,*,#88086,.T.); +#88120 = ORIENTED_EDGE('',*,*,#82028,.F.); +#88121 = ORIENTED_EDGE('',*,*,#88122,.F.); +#88122 = EDGE_CURVE('',#82618,#82021,#88123,.T.); +#88123 = CIRCLE('',#88124,3.E-02); +#88124 = AXIS2_PLACEMENT_3D('',#88125,#88126,#88127); +#88125 = CARTESIAN_POINT('',(4.44,-4.67,2.25)); +#88126 = DIRECTION('',(0.,0.,-1.)); +#88127 = DIRECTION('',(-1.,0.,0.)); +#88128 = ORIENTED_EDGE('',*,*,#83086,.F.); +#88129 = TOROIDAL_SURFACE('',#88130,0.97,3.E-02); +#88130 = AXIS2_PLACEMENT_3D('',#88131,#88132,#88133); +#88131 = CARTESIAN_POINT('',(3.47,-4.67,2.25)); +#88132 = DIRECTION('',(0.,1.,0.)); +#88133 = DIRECTION('',(0.,-0.,1.)); +#88134 = ADVANCED_FACE('',(#88135),#88147,.T.); +#88135 = FACE_BOUND('',#88136,.T.); +#88136 = EDGE_LOOP('',(#88137,#88138,#88139,#88146)); +#88137 = ORIENTED_EDGE('',*,*,#88104,.T.); +#88138 = ORIENTED_EDGE('',*,*,#82776,.F.); +#88139 = ORIENTED_EDGE('',*,*,#88140,.F.); +#88140 = EDGE_CURVE('',#81827,#82768,#88141,.T.); +#88141 = CIRCLE('',#88142,3.E-02); +#88142 = AXIS2_PLACEMENT_3D('',#88143,#88144,#88145); +#88143 = CARTESIAN_POINT('',(-4.44,-4.67,-0.45)); +#88144 = DIRECTION('',(-0.,0.,-1.)); +#88145 = DIRECTION('',(-1.,0.,0.)); +#88146 = ORIENTED_EDGE('',*,*,#81826,.F.); +#88147 = CYLINDRICAL_SURFACE('',#88148,3.E-02); +#88148 = AXIS2_PLACEMENT_3D('',#88149,#88150,#88151); +#88149 = CARTESIAN_POINT('',(-4.44,-4.67,3.25)); +#88150 = DIRECTION('',(0.,0.,-1.)); +#88151 = DIRECTION('',(-1.,0.,0.)); +#88152 = ADVANCED_FACE('',(#88153),#88165,.T.); +#88153 = FACE_BOUND('',#88154,.T.); +#88154 = EDGE_LOOP('',(#88155,#88156,#88157,#88164)); +#88155 = ORIENTED_EDGE('',*,*,#88122,.T.); +#88156 = ORIENTED_EDGE('',*,*,#82020,.F.); +#88157 = ORIENTED_EDGE('',*,*,#88158,.F.); +#88158 = EDGE_CURVE('',#82626,#82013,#88159,.T.); +#88159 = CIRCLE('',#88160,3.E-02); +#88160 = AXIS2_PLACEMENT_3D('',#88161,#88162,#88163); +#88161 = CARTESIAN_POINT('',(4.44,-4.67,-0.45)); +#88162 = DIRECTION('',(0.,0.,-1.)); +#88163 = DIRECTION('',(-1.,0.,0.)); +#88164 = ORIENTED_EDGE('',*,*,#82625,.F.); +#88165 = CYLINDRICAL_SURFACE('',#88166,3.E-02); +#88166 = AXIS2_PLACEMENT_3D('',#88167,#88168,#88169); +#88167 = CARTESIAN_POINT('',(4.44,-4.67,3.25)); +#88168 = DIRECTION('',(0.,0.,-1.)); +#88169 = DIRECTION('',(-1.,0.,0.)); +#88170 = ADVANCED_FACE('',(#88171),#88183,.T.); +#88171 = FACE_BOUND('',#88172,.T.); +#88172 = EDGE_LOOP('',(#88173,#88174,#88175,#88182)); +#88173 = ORIENTED_EDGE('',*,*,#88140,.T.); +#88174 = ORIENTED_EDGE('',*,*,#82767,.F.); +#88175 = ORIENTED_EDGE('',*,*,#88176,.F.); +#88176 = EDGE_CURVE('',#83972,#82760,#88177,.T.); +#88177 = CIRCLE('',#88178,3.E-02); +#88178 = AXIS2_PLACEMENT_3D('',#88179,#88180,#88181); +#88179 = CARTESIAN_POINT('',(-4.44,-4.3,-0.82)); +#88180 = DIRECTION('',(0.,1.,0.)); +#88181 = DIRECTION('',(0.,-0.,1.)); +#88182 = ORIENTED_EDGE('',*,*,#84252,.F.); +#88183 = TOROIDAL_SURFACE('',#88184,0.37,3.E-02); +#88184 = AXIS2_PLACEMENT_3D('',#88185,#88186,#88187); +#88185 = CARTESIAN_POINT('',(-4.44,-4.3,-0.45)); +#88186 = DIRECTION('',(1.,0.,0.)); +#88187 = DIRECTION('',(0.,0.,-1.)); +#88188 = ADVANCED_FACE('',(#88189),#88201,.T.); +#88189 = FACE_BOUND('',#88190,.T.); +#88190 = EDGE_LOOP('',(#88191,#88192,#88193,#88200)); +#88191 = ORIENTED_EDGE('',*,*,#88158,.T.); +#88192 = ORIENTED_EDGE('',*,*,#84204,.F.); +#88193 = ORIENTED_EDGE('',*,*,#88194,.F.); +#88194 = EDGE_CURVE('',#82634,#83820,#88195,.T.); +#88195 = CIRCLE('',#88196,3.E-02); +#88196 = AXIS2_PLACEMENT_3D('',#88197,#88198,#88199); +#88197 = CARTESIAN_POINT('',(4.44,-4.3,-0.82)); +#88198 = DIRECTION('',(-0.,1.,0.)); +#88199 = DIRECTION('',(0.,0.,1.)); +#88200 = ORIENTED_EDGE('',*,*,#82633,.F.); +#88201 = TOROIDAL_SURFACE('',#88202,0.37,3.E-02); +#88202 = AXIS2_PLACEMENT_3D('',#88203,#88204,#88205); +#88203 = CARTESIAN_POINT('',(4.44,-4.3,-0.45)); +#88204 = DIRECTION('',(-1.,0.,0.)); +#88205 = DIRECTION('',(0.,0.,1.)); +#88206 = ADVANCED_FACE('',(#88207),#88219,.T.); +#88207 = FACE_BOUND('',#88208,.T.); +#88208 = EDGE_LOOP('',(#88209,#88210,#88211,#88218)); +#88209 = ORIENTED_EDGE('',*,*,#88176,.T.); +#88210 = ORIENTED_EDGE('',*,*,#82759,.F.); +#88211 = ORIENTED_EDGE('',*,*,#88212,.F.); +#88212 = EDGE_CURVE('',#83980,#82751,#88213,.T.); +#88213 = CIRCLE('',#88214,3.E-02); +#88214 = AXIS2_PLACEMENT_3D('',#88215,#88216,#88217); +#88215 = CARTESIAN_POINT('',(-4.44,-4.05,-0.82)); +#88216 = DIRECTION('',(0.,1.,0.)); +#88217 = DIRECTION('',(0.,-0.,1.)); +#88218 = ORIENTED_EDGE('',*,*,#83979,.F.); +#88219 = CYLINDRICAL_SURFACE('',#88220,3.E-02); +#88220 = AXIS2_PLACEMENT_3D('',#88221,#88222,#88223); +#88221 = CARTESIAN_POINT('',(-4.44,0.,-0.82)); +#88222 = DIRECTION('',(0.,1.,0.)); +#88223 = DIRECTION('',(0.,-0.,1.)); +#88224 = ADVANCED_FACE('',(#88225),#88237,.T.); +#88225 = FACE_BOUND('',#88226,.T.); +#88226 = EDGE_LOOP('',(#88227,#88228,#88229,#88236)); +#88227 = ORIENTED_EDGE('',*,*,#88194,.T.); +#88228 = ORIENTED_EDGE('',*,*,#83819,.F.); +#88229 = ORIENTED_EDGE('',*,*,#88230,.F.); +#88230 = EDGE_CURVE('',#82643,#83812,#88231,.T.); +#88231 = CIRCLE('',#88232,3.E-02); +#88232 = AXIS2_PLACEMENT_3D('',#88233,#88234,#88235); +#88233 = CARTESIAN_POINT('',(4.44,-4.05,-0.82)); +#88234 = DIRECTION('',(-0.,1.,0.)); +#88235 = DIRECTION('',(0.,0.,1.)); +#88236 = ORIENTED_EDGE('',*,*,#82642,.F.); +#88237 = CYLINDRICAL_SURFACE('',#88238,3.E-02); +#88238 = AXIS2_PLACEMENT_3D('',#88239,#88240,#88241); +#88239 = CARTESIAN_POINT('',(4.44,0.,-0.82)); +#88240 = DIRECTION('',(0.,-1.,0.)); +#88241 = DIRECTION('',(0.,0.,-1.)); +#88242 = ADVANCED_FACE('',(#88243),#88255,.T.); +#88243 = FACE_BOUND('',#88244,.T.); +#88244 = EDGE_LOOP('',(#88245,#88246,#88247,#88254)); +#88245 = ORIENTED_EDGE('',*,*,#88212,.T.); +#88246 = ORIENTED_EDGE('',*,*,#82750,.F.); +#88247 = ORIENTED_EDGE('',*,*,#88248,.F.); +#88248 = EDGE_CURVE('',#83932,#82743,#88249,.T.); +#88249 = CIRCLE('',#88250,3.E-02); +#88250 = AXIS2_PLACEMENT_3D('',#88251,#88252,#88253); +#88251 = CARTESIAN_POINT('',(-4.44,-3.68,-0.45)); +#88252 = DIRECTION('',(0.,-0.,1.)); +#88253 = DIRECTION('',(1.,0.,0.)); +#88254 = ORIENTED_EDGE('',*,*,#84276,.F.); +#88255 = TOROIDAL_SURFACE('',#88256,0.37,3.E-02); +#88256 = AXIS2_PLACEMENT_3D('',#88257,#88258,#88259); +#88257 = CARTESIAN_POINT('',(-4.44,-4.05,-0.45)); +#88258 = DIRECTION('',(1.,0.,0.)); +#88259 = DIRECTION('',(0.,0.,-1.)); +#88260 = ADVANCED_FACE('',(#88261),#88273,.T.); +#88261 = FACE_BOUND('',#88262,.T.); +#88262 = EDGE_LOOP('',(#88263,#88264,#88265,#88272)); +#88263 = ORIENTED_EDGE('',*,*,#88230,.T.); +#88264 = ORIENTED_EDGE('',*,*,#84228,.F.); +#88265 = ORIENTED_EDGE('',*,*,#88266,.F.); +#88266 = EDGE_CURVE('',#82651,#83780,#88267,.T.); +#88267 = CIRCLE('',#88268,3.E-02); +#88268 = AXIS2_PLACEMENT_3D('',#88269,#88270,#88271); +#88269 = CARTESIAN_POINT('',(4.44,-3.68,-0.45)); +#88270 = DIRECTION('',(0.,0.,1.)); +#88271 = DIRECTION('',(1.,0.,-0.)); +#88272 = ORIENTED_EDGE('',*,*,#82650,.F.); +#88273 = TOROIDAL_SURFACE('',#88274,0.37,3.E-02); +#88274 = AXIS2_PLACEMENT_3D('',#88275,#88276,#88277); +#88275 = CARTESIAN_POINT('',(4.44,-4.05,-0.45)); +#88276 = DIRECTION('',(-1.,0.,0.)); +#88277 = DIRECTION('',(0.,0.,1.)); +#88278 = ADVANCED_FACE('',(#88279),#88291,.T.); +#88279 = FACE_BOUND('',#88280,.T.); +#88280 = EDGE_LOOP('',(#88281,#88282,#88283,#88290)); +#88281 = ORIENTED_EDGE('',*,*,#88248,.T.); +#88282 = ORIENTED_EDGE('',*,*,#82742,.F.); +#88283 = ORIENTED_EDGE('',*,*,#88284,.F.); +#88284 = EDGE_CURVE('',#83940,#82734,#88285,.T.); +#88285 = CIRCLE('',#88286,3.E-02); +#88286 = AXIS2_PLACEMENT_3D('',#88287,#88288,#88289); +#88287 = CARTESIAN_POINT('',(-4.44,-3.68,1.25)); +#88288 = DIRECTION('',(0.,-0.,1.)); +#88289 = DIRECTION('',(1.,0.,0.)); +#88290 = ORIENTED_EDGE('',*,*,#83939,.F.); +#88291 = CYLINDRICAL_SURFACE('',#88292,3.E-02); +#88292 = AXIS2_PLACEMENT_3D('',#88293,#88294,#88295); +#88293 = CARTESIAN_POINT('',(-4.44,-3.68,-0.85)); +#88294 = DIRECTION('',(0.,0.,1.)); +#88295 = DIRECTION('',(1.,0.,-0.)); +#88296 = ADVANCED_FACE('',(#88297),#88309,.T.); +#88297 = FACE_BOUND('',#88298,.T.); +#88298 = EDGE_LOOP('',(#88299,#88300,#88301,#88308)); +#88299 = ORIENTED_EDGE('',*,*,#88266,.T.); +#88300 = ORIENTED_EDGE('',*,*,#83779,.F.); +#88301 = ORIENTED_EDGE('',*,*,#88302,.F.); +#88302 = EDGE_CURVE('',#82660,#83772,#88303,.T.); +#88303 = CIRCLE('',#88304,3.E-02); +#88304 = AXIS2_PLACEMENT_3D('',#88305,#88306,#88307); +#88305 = CARTESIAN_POINT('',(4.44,-3.68,1.25)); +#88306 = DIRECTION('',(0.,0.,1.)); +#88307 = DIRECTION('',(1.,0.,-0.)); +#88308 = ORIENTED_EDGE('',*,*,#82659,.F.); +#88309 = CYLINDRICAL_SURFACE('',#88310,3.E-02); +#88310 = AXIS2_PLACEMENT_3D('',#88311,#88312,#88313); +#88311 = CARTESIAN_POINT('',(4.44,-3.68,3.25)); +#88312 = DIRECTION('',(0.,0.,1.)); +#88313 = DIRECTION('',(1.,0.,-0.)); +#88314 = ADVANCED_FACE('',(#88315),#88327,.T.); +#88315 = FACE_BOUND('',#88316,.T.); +#88316 = EDGE_LOOP('',(#88317,#88318,#88319,#88326)); +#88317 = ORIENTED_EDGE('',*,*,#88284,.T.); +#88318 = ORIENTED_EDGE('',*,*,#82733,.F.); +#88319 = ORIENTED_EDGE('',*,*,#88320,.F.); +#88320 = EDGE_CURVE('',#81876,#82726,#88321,.T.); +#88321 = CIRCLE('',#88322,3.E-02); +#88322 = AXIS2_PLACEMENT_3D('',#88323,#88324,#88325); +#88323 = CARTESIAN_POINT('',(-4.44,-3.45,1.48)); +#88324 = DIRECTION('',(0.,1.,0.)); +#88325 = DIRECTION('',(0.,-0.,1.)); +#88326 = ORIENTED_EDGE('',*,*,#84555,.F.); +#88327 = TOROIDAL_SURFACE('',#88328,0.23,3.E-02); +#88328 = AXIS2_PLACEMENT_3D('',#88329,#88330,#88331); +#88329 = CARTESIAN_POINT('',(-4.44,-3.45,1.25)); +#88330 = DIRECTION('',(1.,0.,0.)); +#88331 = DIRECTION('',(0.,0.,-1.)); +#88332 = ADVANCED_FACE('',(#88333),#88345,.T.); +#88333 = FACE_BOUND('',#88334,.T.); +#88334 = EDGE_LOOP('',(#88335,#88336,#88337,#88344)); +#88335 = ORIENTED_EDGE('',*,*,#88302,.T.); +#88336 = ORIENTED_EDGE('',*,*,#84483,.F.); +#88337 = ORIENTED_EDGE('',*,*,#88338,.F.); +#88338 = EDGE_CURVE('',#82668,#81924,#88339,.T.); +#88339 = CIRCLE('',#88340,3.E-02); +#88340 = AXIS2_PLACEMENT_3D('',#88341,#88342,#88343); +#88341 = CARTESIAN_POINT('',(4.44,-3.45,1.48)); +#88342 = DIRECTION('',(-0.,1.,0.)); +#88343 = DIRECTION('',(0.,0.,1.)); +#88344 = ORIENTED_EDGE('',*,*,#82667,.F.); +#88345 = TOROIDAL_SURFACE('',#88346,0.23,3.E-02); +#88346 = AXIS2_PLACEMENT_3D('',#88347,#88348,#88349); +#88347 = CARTESIAN_POINT('',(4.44,-3.45,1.25)); +#88348 = DIRECTION('',(-1.,0.,0.)); +#88349 = DIRECTION('',(0.,0.,1.)); +#88350 = ADVANCED_FACE('',(#88351),#88363,.T.); +#88351 = FACE_BOUND('',#88352,.T.); +#88352 = EDGE_LOOP('',(#88353,#88354,#88355,#88362)); +#88353 = ORIENTED_EDGE('',*,*,#88320,.T.); +#88354 = ORIENTED_EDGE('',*,*,#82725,.F.); +#88355 = ORIENTED_EDGE('',*,*,#88356,.F.); +#88356 = EDGE_CURVE('',#81884,#82717,#88357,.T.); +#88357 = CIRCLE('',#88358,3.E-02); +#88358 = AXIS2_PLACEMENT_3D('',#88359,#88360,#88361); +#88359 = CARTESIAN_POINT('',(-4.44,-3.4,1.48)); +#88360 = DIRECTION('',(0.,1.,0.)); +#88361 = DIRECTION('',(0.,-0.,1.)); +#88362 = ORIENTED_EDGE('',*,*,#81883,.F.); +#88363 = CYLINDRICAL_SURFACE('',#88364,3.E-02); +#88364 = AXIS2_PLACEMENT_3D('',#88365,#88366,#88367); +#88365 = CARTESIAN_POINT('',(-4.44,-4.7,1.48)); +#88366 = DIRECTION('',(-0.,1.,0.)); +#88367 = DIRECTION('',(0.,0.,1.)); +#88368 = ADVANCED_FACE('',(#88369),#88381,.T.); +#88369 = FACE_BOUND('',#88370,.T.); +#88370 = EDGE_LOOP('',(#88371,#88372,#88373,#88380)); +#88371 = ORIENTED_EDGE('',*,*,#88338,.T.); +#88372 = ORIENTED_EDGE('',*,*,#81923,.F.); +#88373 = ORIENTED_EDGE('',*,*,#88374,.F.); +#88374 = EDGE_CURVE('',#82464,#81916,#88375,.T.); +#88375 = CIRCLE('',#88376,3.E-02); +#88376 = AXIS2_PLACEMENT_3D('',#88377,#88378,#88379); +#88377 = CARTESIAN_POINT('',(4.44,-3.4,1.48)); +#88378 = DIRECTION('',(-0.,1.,0.)); +#88379 = DIRECTION('',(0.,0.,1.)); +#88380 = ORIENTED_EDGE('',*,*,#82676,.F.); +#88381 = CYLINDRICAL_SURFACE('',#88382,3.E-02); +#88382 = AXIS2_PLACEMENT_3D('',#88383,#88384,#88385); +#88383 = CARTESIAN_POINT('',(4.44,-4.7,1.48)); +#88384 = DIRECTION('',(0.,-1.,0.)); +#88385 = DIRECTION('',(0.,0.,-1.)); +#88386 = ADVANCED_FACE('',(#88387),#88399,.T.); +#88387 = FACE_BOUND('',#88388,.T.); +#88388 = EDGE_LOOP('',(#88389,#88390,#88391,#88398)); +#88389 = ORIENTED_EDGE('',*,*,#88356,.T.); +#88390 = ORIENTED_EDGE('',*,*,#82716,.F.); +#88391 = ORIENTED_EDGE('',*,*,#88392,.F.); +#88392 = EDGE_CURVE('',#83398,#82709,#88393,.T.); +#88393 = CIRCLE('',#88394,3.E-02); +#88394 = AXIS2_PLACEMENT_3D('',#88395,#88396,#88397); +#88395 = CARTESIAN_POINT('',(-4.44,-3.17,1.25)); +#88396 = DIRECTION('',(-0.,0.,-1.)); +#88397 = DIRECTION('',(-1.,0.,0.)); +#88398 = ORIENTED_EDGE('',*,*,#84531,.F.); +#88399 = TOROIDAL_SURFACE('',#88400,0.23,3.E-02); +#88400 = AXIS2_PLACEMENT_3D('',#88401,#88402,#88403); +#88401 = CARTESIAN_POINT('',(-4.44,-3.4,1.25)); +#88402 = DIRECTION('',(1.,0.,0.)); +#88403 = DIRECTION('',(0.,0.,-1.)); +#88404 = ADVANCED_FACE('',(#88405),#88417,.T.); +#88405 = FACE_BOUND('',#88406,.T.); +#88406 = EDGE_LOOP('',(#88407,#88408,#88409,#88416)); +#88407 = ORIENTED_EDGE('',*,*,#88374,.T.); +#88408 = ORIENTED_EDGE('',*,*,#84507,.F.); +#88409 = ORIENTED_EDGE('',*,*,#88410,.F.); +#88410 = EDGE_CURVE('',#82466,#83346,#88411,.T.); +#88411 = CIRCLE('',#88412,3.E-02); +#88412 = AXIS2_PLACEMENT_3D('',#88413,#88414,#88415); +#88413 = CARTESIAN_POINT('',(4.44,-3.17,1.25)); +#88414 = DIRECTION('',(0.,0.,-1.)); +#88415 = DIRECTION('',(-1.,0.,0.)); +#88416 = ORIENTED_EDGE('',*,*,#82463,.F.); +#88417 = TOROIDAL_SURFACE('',#88418,0.23,3.E-02); +#88418 = AXIS2_PLACEMENT_3D('',#88419,#88420,#88421); +#88419 = CARTESIAN_POINT('',(4.44,-3.4,1.25)); +#88420 = DIRECTION('',(-1.,0.,0.)); +#88421 = DIRECTION('',(0.,0.,1.)); +#88422 = ADVANCED_FACE('',(#88423),#88435,.T.); +#88423 = FACE_BOUND('',#88424,.T.); +#88424 = EDGE_LOOP('',(#88425,#88426,#88427,#88434)); +#88425 = ORIENTED_EDGE('',*,*,#88392,.T.); +#88426 = ORIENTED_EDGE('',*,*,#82708,.F.); +#88427 = ORIENTED_EDGE('',*,*,#88428,.F.); +#88428 = EDGE_CURVE('',#83406,#81956,#88429,.T.); +#88429 = CIRCLE('',#88430,3.E-02); +#88430 = AXIS2_PLACEMENT_3D('',#88431,#88432,#88433); +#88431 = CARTESIAN_POINT('',(-4.44,-3.17,1.05)); +#88432 = DIRECTION('',(-0.,0.,-1.)); +#88433 = DIRECTION('',(-1.,0.,0.)); +#88434 = ORIENTED_EDGE('',*,*,#83405,.F.); +#88435 = CYLINDRICAL_SURFACE('',#88436,3.E-02); +#88436 = AXIS2_PLACEMENT_3D('',#88437,#88438,#88439); +#88437 = CARTESIAN_POINT('',(-4.44,-3.17,12.314965526686)); +#88438 = DIRECTION('',(0.,-0.,-1.)); +#88439 = DIRECTION('',(-1.,-0.,0.)); +#88440 = ADVANCED_FACE('',(#88441),#88453,.T.); +#88441 = FACE_BOUND('',#88442,.T.); +#88442 = EDGE_LOOP('',(#88443,#88444,#88445,#88452)); +#88443 = ORIENTED_EDGE('',*,*,#88410,.T.); +#88444 = ORIENTED_EDGE('',*,*,#83439,.F.); +#88445 = ORIENTED_EDGE('',*,*,#88446,.F.); +#88446 = EDGE_CURVE('',#82475,#83431,#88447,.T.); +#88447 = CIRCLE('',#88448,3.E-02); +#88448 = AXIS2_PLACEMENT_3D('',#88449,#88450,#88451); +#88449 = CARTESIAN_POINT('',(4.44,-3.17,1.05)); +#88450 = DIRECTION('',(0.,7.228014483237E-15,-1.)); +#88451 = DIRECTION('',(0.,1.,7.228014483237E-15)); +#88452 = ORIENTED_EDGE('',*,*,#82474,.F.); +#88453 = CYLINDRICAL_SURFACE('',#88454,3.E-02); +#88454 = AXIS2_PLACEMENT_3D('',#88455,#88456,#88457); +#88455 = CARTESIAN_POINT('',(4.44,-3.17,3.25)); +#88456 = DIRECTION('',(0.,0.,-1.)); +#88457 = DIRECTION('',(-1.,0.,0.)); +#88458 = ADVANCED_FACE('',(#88459),#88471,.T.); +#88459 = FACE_BOUND('',#88460,.T.); +#88460 = EDGE_LOOP('',(#88461,#88462,#88463,#88470)); +#88461 = ORIENTED_EDGE('',*,*,#88428,.T.); +#88462 = ORIENTED_EDGE('',*,*,#81971,.F.); +#88463 = ORIENTED_EDGE('',*,*,#88464,.F.); +#88464 = EDGE_CURVE('',#83414,#79717,#88465,.T.); +#88465 = CIRCLE('',#88466,3.E-02); +#88466 = AXIS2_PLACEMENT_3D('',#88467,#88468,#88469); +#88467 = CARTESIAN_POINT('',(-3.47,-3.17,8.E-02)); +#88468 = DIRECTION('',(1.,0.,0.)); +#88469 = DIRECTION('',(0.,0.,-1.)); +#88470 = ORIENTED_EDGE('',*,*,#83413,.F.); +#88471 = TOROIDAL_SURFACE('',#88472,0.97,3.E-02); +#88472 = AXIS2_PLACEMENT_3D('',#88473,#88474,#88475); +#88473 = CARTESIAN_POINT('',(-3.47,-3.17,1.05)); +#88474 = DIRECTION('',(0.,1.,-0.)); +#88475 = DIRECTION('',(0.,0.,1.)); +#88476 = ADVANCED_FACE('',(#88477),#88489,.T.); +#88477 = FACE_BOUND('',#88478,.T.); +#88478 = EDGE_LOOP('',(#88479,#88480,#88481,#88488)); +#88479 = ORIENTED_EDGE('',*,*,#88446,.T.); +#88480 = ORIENTED_EDGE('',*,*,#83430,.F.); +#88481 = ORIENTED_EDGE('',*,*,#88482,.F.); +#88482 = EDGE_CURVE('',#79709,#83423,#88483,.T.); +#88483 = CIRCLE('',#88484,3.E-02); +#88484 = AXIS2_PLACEMENT_3D('',#88485,#88486,#88487); +#88485 = CARTESIAN_POINT('',(3.47,-3.17,8.E-02)); +#88486 = DIRECTION('',(-1.,0.,0.)); +#88487 = DIRECTION('',(0.,0.,1.)); +#88488 = ORIENTED_EDGE('',*,*,#83070,.F.); +#88489 = TOROIDAL_SURFACE('',#88490,0.97,3.E-02); +#88490 = AXIS2_PLACEMENT_3D('',#88491,#88492,#88493); +#88491 = CARTESIAN_POINT('',(3.47,-3.17,1.05)); +#88492 = DIRECTION('',(0.,1.,-0.)); +#88493 = DIRECTION('',(0.,0.,1.)); +#88494 = ADVANCED_FACE('',(#88495),#88501,.T.); +#88495 = FACE_BOUND('',#88496,.T.); +#88496 = EDGE_LOOP('',(#88497,#88498,#88499,#88500)); +#88497 = ORIENTED_EDGE('',*,*,#88464,.T.); +#88498 = ORIENTED_EDGE('',*,*,#79716,.F.); +#88499 = ORIENTED_EDGE('',*,*,#88482,.T.); +#88500 = ORIENTED_EDGE('',*,*,#83422,.F.); +#88501 = CYLINDRICAL_SURFACE('',#88502,3.E-02); +#88502 = AXIS2_PLACEMENT_3D('',#88503,#88504,#88505); +#88503 = CARTESIAN_POINT('',(4.47,-3.17,8.E-02)); +#88504 = DIRECTION('',(-1.,0.,0.)); +#88505 = DIRECTION('',(0.,0.,1.)); +#88506 = ADVANCED_FACE('',(#88507),#88525,.T.); +#88507 = FACE_BOUND('',#88508,.T.); +#88508 = EDGE_LOOP('',(#88509,#88516,#88517,#88524)); +#88509 = ORIENTED_EDGE('',*,*,#88510,.F.); +#88510 = EDGE_CURVE('',#85350,#85647,#88511,.T.); +#88511 = CIRCLE('',#88512,3.E-02); +#88512 = AXIS2_PLACEMENT_3D('',#88513,#88514,#88515); +#88513 = CARTESIAN_POINT('',(2.139365466512,-4.4,1.994682733256)); +#88514 = DIRECTION('',(0.,-1.,0.)); +#88515 = DIRECTION('',(0.,0.,-1.)); +#88516 = ORIENTED_EDGE('',*,*,#85393,.F.); +#88517 = ORIENTED_EDGE('',*,*,#88518,.F.); +#88518 = EDGE_CURVE('',#85629,#85385,#88519,.T.); +#88519 = CIRCLE('',#88520,3.E-02); +#88520 = AXIS2_PLACEMENT_3D('',#88521,#88522,#88523); +#88521 = CARTESIAN_POINT('',(2.139365466512,-4.2,1.994682733256)); +#88522 = DIRECTION('',(0.,1.,0.)); +#88523 = DIRECTION('',(0.,-0.,1.)); +#88524 = ORIENTED_EDGE('',*,*,#85654,.F.); +#88525 = CYLINDRICAL_SURFACE('',#88526,3.E-02); +#88526 = AXIS2_PLACEMENT_3D('',#88527,#88528,#88529); +#88527 = CARTESIAN_POINT('',(2.139365466512,0.,1.994682733256)); +#88528 = DIRECTION('',(0.,1.,0.)); +#88529 = DIRECTION('',(0.,-0.,1.)); +#88530 = ADVANCED_FACE('',(#88531),#88543,.T.); +#88531 = FACE_BOUND('',#88532,.T.); +#88532 = EDGE_LOOP('',(#88533,#88534,#88535,#88542)); +#88533 = ORIENTED_EDGE('',*,*,#88518,.T.); +#88534 = ORIENTED_EDGE('',*,*,#85384,.F.); +#88535 = ORIENTED_EDGE('',*,*,#88536,.F.); +#88536 = EDGE_CURVE('',#85426,#85377,#88537,.T.); +#88537 = CIRCLE('',#88538,3.E-02); +#88538 = AXIS2_PLACEMENT_3D('',#88539,#88540,#88541); +#88539 = CARTESIAN_POINT('',(1.963651795679,-3.93,2.199682015895)); +#88540 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#88541 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#88542 = ORIENTED_EDGE('',*,*,#85923,.F.); +#88543 = TOROIDAL_SURFACE('',#88544,0.27,3.E-02); +#88544 = AXIS2_PLACEMENT_3D('',#88545,#88546,#88547); +#88545 = CARTESIAN_POINT('',(1.963651795679,-4.2,2.199682015895)); +#88546 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#88547 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#88548 = ADVANCED_FACE('',(#88549),#88561,.T.); +#88549 = FACE_BOUND('',#88550,.T.); +#88550 = EDGE_LOOP('',(#88551,#88552,#88553,#88560)); +#88551 = ORIENTED_EDGE('',*,*,#88510,.T.); +#88552 = ORIENTED_EDGE('',*,*,#85947,.F.); +#88553 = ORIENTED_EDGE('',*,*,#88554,.F.); +#88554 = EDGE_CURVE('',#85352,#85310,#88555,.T.); +#88555 = CIRCLE('',#88556,3.E-02); +#88556 = AXIS2_PLACEMENT_3D('',#88557,#88558,#88559); +#88557 = CARTESIAN_POINT('',(1.963651795679,-4.67,2.199682015895)); +#88558 = DIRECTION('',(-0.650791373456,-7.839882454842E-15, + 0.759256602365)); +#88559 = DIRECTION('',(0.759256602365,-3.715643269743E-29,0.650791373456 + )); +#88560 = ORIENTED_EDGE('',*,*,#85349,.F.); +#88561 = TOROIDAL_SURFACE('',#88562,0.27,3.E-02); +#88562 = AXIS2_PLACEMENT_3D('',#88563,#88564,#88565); +#88563 = CARTESIAN_POINT('',(1.963651795679,-4.4,2.199682015895)); +#88564 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#88565 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#88566 = ADVANCED_FACE('',(#88567),#88579,.T.); +#88567 = FACE_BOUND('',#88568,.T.); +#88568 = EDGE_LOOP('',(#88569,#88570,#88571,#88578)); +#88569 = ORIENTED_EDGE('',*,*,#88536,.T.); +#88570 = ORIENTED_EDGE('',*,*,#85376,.F.); +#88571 = ORIENTED_EDGE('',*,*,#88572,.F.); +#88572 = EDGE_CURVE('',#85408,#85369,#88573,.T.); +#88573 = CIRCLE('',#88574,3.E-02); +#88574 = AXIS2_PLACEMENT_3D('',#88575,#88576,#88577); +#88575 = CARTESIAN_POINT('',(1.33371962769,-3.93,2.934602878549)); +#88576 = DIRECTION('',(-0.650791373456,0.,0.759256602365)); +#88577 = DIRECTION('',(0.759256602365,0.,0.650791373456)); +#88578 = ORIENTED_EDGE('',*,*,#85433,.F.); +#88579 = CYLINDRICAL_SURFACE('',#88580,3.E-02); +#88580 = AXIS2_PLACEMENT_3D('',#88581,#88582,#88583); +#88581 = CARTESIAN_POINT('',(1.33371962769,-3.93,2.934602878549)); +#88582 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#88583 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#88584 = ADVANCED_FACE('',(#88585),#88597,.T.); +#88585 = FACE_BOUND('',#88586,.T.); +#88586 = EDGE_LOOP('',(#88587,#88588,#88589,#88596)); +#88587 = ORIENTED_EDGE('',*,*,#88554,.T.); +#88588 = ORIENTED_EDGE('',*,*,#85335,.F.); +#88589 = ORIENTED_EDGE('',*,*,#88590,.F.); +#88590 = EDGE_CURVE('',#85361,#85328,#88591,.T.); +#88591 = CIRCLE('',#88592,3.E-02); +#88592 = AXIS2_PLACEMENT_3D('',#88593,#88594,#88595); +#88593 = CARTESIAN_POINT('',(1.33371962769,-4.67,2.934602878549)); +#88594 = DIRECTION('',(-0.650791373456,-2.038369438259E-14, + 0.759256602365)); +#88595 = DIRECTION('',(0.759256602365,-3.557635823822E-30,0.650791373456 + )); +#88596 = ORIENTED_EDGE('',*,*,#85360,.F.); +#88597 = CYLINDRICAL_SURFACE('',#88598,3.E-02); +#88598 = AXIS2_PLACEMENT_3D('',#88599,#88600,#88601); +#88599 = CARTESIAN_POINT('',(1.33371962769,-4.67,2.934602878549)); +#88600 = DIRECTION('',(0.650791373456,0.,-0.759256602365)); +#88601 = DIRECTION('',(-0.759256602365,0.,-0.650791373456)); +#88602 = ADVANCED_FACE('',(#88603),#88615,.T.); +#88603 = FACE_BOUND('',#88604,.T.); +#88604 = EDGE_LOOP('',(#88605,#88606,#88607,#88614)); +#88605 = ORIENTED_EDGE('',*,*,#88572,.T.); +#88606 = ORIENTED_EDGE('',*,*,#85529,.F.); +#88607 = ORIENTED_EDGE('',*,*,#88608,.F.); +#88608 = EDGE_CURVE('',#85563,#85530,#88609,.T.); +#88609 = CIRCLE('',#88610,3.E-02); +#88610 = AXIS2_PLACEMENT_3D('',#88611,#88612,#88613); +#88611 = CARTESIAN_POINT('',(1.25,-3.93,2.979133604522)); +#88612 = DIRECTION('',(-0.993335419398,0.,0.115259466291)); +#88613 = DIRECTION('',(0.115259466291,0.,0.993335419398)); +#88614 = ORIENTED_EDGE('',*,*,#85580,.F.); +#88615 = TOROIDAL_SURFACE('',#88616,0.13,3.E-02); +#88616 = AXIS2_PLACEMENT_3D('',#88617,#88618,#88619); +#88617 = CARTESIAN_POINT('',(1.235016269382,-3.93,2.85)); +#88618 = DIRECTION('',(-0.,1.,-0.)); +#88619 = DIRECTION('',(0.,0.,1.)); +#88620 = ADVANCED_FACE('',(#88621),#88633,.T.); +#88621 = FACE_BOUND('',#88622,.T.); +#88622 = EDGE_LOOP('',(#88623,#88624,#88625,#88632)); +#88623 = ORIENTED_EDGE('',*,*,#88590,.T.); +#88624 = ORIENTED_EDGE('',*,*,#85514,.F.); +#88625 = ORIENTED_EDGE('',*,*,#88626,.F.); +#88626 = EDGE_CURVE('',#81084,#81762,#88627,.T.); +#88627 = CIRCLE('',#88628,3.E-02); +#88628 = AXIS2_PLACEMENT_3D('',#88629,#88630,#88631); +#88629 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.98)); +#88630 = DIRECTION('',(-1.,0.,-0.)); +#88631 = DIRECTION('',(-0.,0.,1.)); +#88632 = ORIENTED_EDGE('',*,*,#85546,.F.); +#88633 = TOROIDAL_SURFACE('',#88634,0.13,3.E-02); +#88634 = AXIS2_PLACEMENT_3D('',#88635,#88636,#88637); +#88635 = CARTESIAN_POINT('',(1.235016269382,-4.67,2.85)); +#88636 = DIRECTION('',(0.,-1.,0.)); +#88637 = DIRECTION('',(0.,0.,-1.)); +#88638 = ADVANCED_FACE('',(#88639),#88651,.T.); +#88639 = FACE_BOUND('',#88640,.T.); +#88640 = EDGE_LOOP('',(#88641,#88642,#88643,#88650)); +#88641 = ORIENTED_EDGE('',*,*,#88608,.T.); +#88642 = ORIENTED_EDGE('',*,*,#85538,.F.); +#88643 = ORIENTED_EDGE('',*,*,#88644,.F.); +#88644 = EDGE_CURVE('',#85798,#81075,#88645,.T.); +#88645 = CIRCLE('',#88646,3.E-02); +#88646 = AXIS2_PLACEMENT_3D('',#88647,#88648,#88649); +#88647 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,2.98)); +#88648 = DIRECTION('',(-0.996529282876,8.324294787555E-02, + 7.202928089596E-15)); +#88649 = DIRECTION('',(-8.324294787555E-02,-0.996529282876, + -8.702670731841E-30)); +#88650 = ORIENTED_EDGE('',*,*,#85806,.F.); +#88651 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(3,2,( + (#88652,#88653,#88654) + ,(#88655,#88656,#88657) + ,(#88658,#88659,#88660) + ,(#88661,#88662,#88663 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((4,4),(3,3),( + -1.916056289325E-16,1.502175458367E-05),(0.,1.), +.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_SURFACE(( + (1.,0.707106781187,1.) + ,(1.,0.705977289088,1.) + ,(1.,0.70597365948,1.) +,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#88652 = CARTESIAN_POINT('',(1.246542216011,-3.93,2.94933354194)); +#88653 = CARTESIAN_POINT('',(1.246542216011,-3.9,2.94933354194)); +#88654 = CARTESIAN_POINT('',(1.25,-3.9,2.979133604522)); +#88655 = CARTESIAN_POINT('',(1.242706530515,-3.930000006634, + 2.949778607176)); +#88656 = CARTESIAN_POINT('',(1.243521825627,-3.899904042323, + 2.949683973493)); +#88657 = CARTESIAN_POINT('',(1.245844690046,-3.9,2.979712162686)); +#88658 = CARTESIAN_POINT('',(1.238864285369,-3.929793119298,2.95)); +#88659 = CARTESIAN_POINT('',(1.240540569704,-3.899732225986, + 2.949903726698)); +#88660 = CARTESIAN_POINT('',(1.241682234358,-3.899827613934, + 2.979999993657)); +#88661 = CARTESIAN_POINT('',(1.235016269382,-3.929375270918,2.95)); +#88662 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,2.95)); +#88663 = CARTESIAN_POINT('',(1.237513557819,-3.899479392431,2.98)); +#88664 = ADVANCED_FACE('',(#88665),#88684,.T.); +#88665 = FACE_BOUND('',#88666,.T.); +#88666 = EDGE_LOOP('',(#88667,#88668,#88669,#88676,#88677,#88683)); +#88667 = ORIENTED_EDGE('',*,*,#88626,.T.); +#88668 = ORIENTED_EDGE('',*,*,#81785,.F.); +#88669 = ORIENTED_EDGE('',*,*,#88670,.F.); +#88670 = EDGE_CURVE('',#81034,#81778,#88671,.T.); +#88671 = CIRCLE('',#88672,3.E-02); +#88672 = AXIS2_PLACEMENT_3D('',#88673,#88674,#88675); +#88673 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.98)); +#88674 = DIRECTION('',(-1.,0.,-0.)); +#88675 = DIRECTION('',(-0.,0.,1.)); +#88676 = ORIENTED_EDGE('',*,*,#81033,.F.); +#88677 = ORIENTED_EDGE('',*,*,#88678,.T.); +#88678 = EDGE_CURVE('',#81024,#81065,#88679,.T.); +#88679 = LINE('',#88680,#88681); +#88680 = CARTESIAN_POINT('',(0.,-4.67,2.95)); +#88681 = VECTOR('',#88682,1.); +#88682 = DIRECTION('',(1.,-0.,-0.)); +#88683 = ORIENTED_EDGE('',*,*,#81091,.F.); +#88684 = CYLINDRICAL_SURFACE('',#88685,3.E-02); +#88685 = AXIS2_PLACEMENT_3D('',#88686,#88687,#88688); +#88686 = CARTESIAN_POINT('',(0.,-4.67,2.98)); +#88687 = DIRECTION('',(-1.,0.,0.)); +#88688 = DIRECTION('',(0.,0.,1.)); +#88689 = ADVANCED_FACE('',(#88690),#88711,.T.); +#88690 = FACE_BOUND('',#88691,.T.); +#88691 = EDGE_LOOP('',(#88692,#88693,#88694,#88703,#88710)); +#88692 = ORIENTED_EDGE('',*,*,#88644,.T.); +#88693 = ORIENTED_EDGE('',*,*,#81074,.F.); +#88694 = ORIENTED_EDGE('',*,*,#88695,.F.); +#88695 = EDGE_CURVE('',#88696,#81067,#88698,.T.); +#88696 = VERTEX_POINT('',#88697); +#88697 = CARTESIAN_POINT('',(1.07,-3.75,2.95)); +#88698 = CIRCLE('',#88699,0.18); +#88699 = AXIS2_PLACEMENT_3D('',#88700,#88701,#88702); +#88700 = CARTESIAN_POINT('',(1.25,-3.75,2.95)); +#88701 = DIRECTION('',(0.,-0.,1.)); +#88702 = DIRECTION('',(1.,0.,0.)); +#88703 = ORIENTED_EDGE('',*,*,#88704,.F.); +#88704 = EDGE_CURVE('',#85765,#88696,#88705,.T.); +#88705 = CIRCLE('',#88706,3.E-02); +#88706 = AXIS2_PLACEMENT_3D('',#88707,#88708,#88709); +#88707 = CARTESIAN_POINT('',(1.07,-3.75,2.98)); +#88708 = DIRECTION('',(-0.,1.,0.)); +#88709 = DIRECTION('',(0.,0.,1.)); +#88710 = ORIENTED_EDGE('',*,*,#85797,.F.); +#88711 = TOROIDAL_SURFACE('',#88712,0.18,3.E-02); +#88712 = AXIS2_PLACEMENT_3D('',#88713,#88714,#88715); +#88713 = CARTESIAN_POINT('',(1.25,-3.75,2.98)); +#88714 = DIRECTION('',(0.,-0.,1.)); +#88715 = DIRECTION('',(1.,0.,0.)); +#88716 = ADVANCED_FACE('',(#88717),#88729,.T.); +#88717 = FACE_BOUND('',#88718,.T.); +#88718 = EDGE_LOOP('',(#88719,#88720,#88721,#88728)); +#88719 = ORIENTED_EDGE('',*,*,#88670,.T.); +#88720 = ORIENTED_EDGE('',*,*,#85230,.F.); +#88721 = ORIENTED_EDGE('',*,*,#88722,.F.); +#88722 = EDGE_CURVE('',#85019,#85060,#88723,.T.); +#88723 = CIRCLE('',#88724,3.E-02); +#88724 = AXIS2_PLACEMENT_3D('',#88725,#88726,#88727); +#88725 = CARTESIAN_POINT('',(-1.33371962769,-4.67,2.934602878549)); +#88726 = DIRECTION('',(-0.650791373456,2.038369438259E-14, + -0.759256602365)); +#88727 = DIRECTION('',(-0.759256602365,9.585115104273E-31,0.650791373456 + )); +#88728 = ORIENTED_EDGE('',*,*,#85189,.F.); +#88729 = TOROIDAL_SURFACE('',#88730,0.13,3.E-02); +#88730 = AXIS2_PLACEMENT_3D('',#88731,#88732,#88733); +#88731 = CARTESIAN_POINT('',(-1.235016269382,-4.67,2.85)); +#88732 = DIRECTION('',(0.,1.,-0.)); +#88733 = DIRECTION('',(0.,0.,1.)); +#88734 = ADVANCED_FACE('',(#88735),#88755,.T.); +#88735 = FACE_BOUND('',#88736,.T.); +#88736 = EDGE_LOOP('',(#88737,#88738,#88747,#88754)); +#88737 = ORIENTED_EDGE('',*,*,#88704,.T.); +#88738 = ORIENTED_EDGE('',*,*,#88739,.F.); +#88739 = EDGE_CURVE('',#88740,#88696,#88742,.T.); +#88740 = VERTEX_POINT('',#88741); +#88741 = CARTESIAN_POINT('',(1.25,-3.57,2.95)); +#88742 = CIRCLE('',#88743,0.18); +#88743 = AXIS2_PLACEMENT_3D('',#88744,#88745,#88746); +#88744 = CARTESIAN_POINT('',(1.25,-3.75,2.95)); +#88745 = DIRECTION('',(0.,-0.,1.)); +#88746 = DIRECTION('',(1.,0.,0.)); +#88747 = ORIENTED_EDGE('',*,*,#88748,.F.); +#88748 = EDGE_CURVE('',#84898,#88740,#88749,.T.); +#88749 = CIRCLE('',#88750,3.E-02); +#88750 = AXIS2_PLACEMENT_3D('',#88751,#88752,#88753); +#88751 = CARTESIAN_POINT('',(1.25,-3.57,2.98)); +#88752 = DIRECTION('',(1.,0.,0.)); +#88753 = DIRECTION('',(0.,0.,-1.)); +#88754 = ORIENTED_EDGE('',*,*,#85764,.F.); +#88755 = TOROIDAL_SURFACE('',#88756,0.18,3.E-02); +#88756 = AXIS2_PLACEMENT_3D('',#88757,#88758,#88759); +#88757 = CARTESIAN_POINT('',(1.25,-3.75,2.98)); +#88758 = DIRECTION('',(0.,-0.,1.)); +#88759 = DIRECTION('',(1.,0.,0.)); +#88760 = ADVANCED_FACE('',(#88761),#88773,.T.); +#88761 = FACE_BOUND('',#88762,.T.); +#88762 = EDGE_LOOP('',(#88763,#88764,#88765,#88772)); +#88763 = ORIENTED_EDGE('',*,*,#88722,.T.); +#88764 = ORIENTED_EDGE('',*,*,#85083,.F.); +#88765 = ORIENTED_EDGE('',*,*,#88766,.F.); +#88766 = EDGE_CURVE('',#85027,#85076,#88767,.T.); +#88767 = CIRCLE('',#88768,3.E-02); +#88768 = AXIS2_PLACEMENT_3D('',#88769,#88770,#88771); +#88769 = CARTESIAN_POINT('',(-1.963651795679,-4.67,2.199682015895)); +#88770 = DIRECTION('',(-0.650791373456,9.407858945811E-15, + -0.759256602365)); +#88771 = DIRECTION('',(-0.759256602365,-4.378103885243E-29, + 0.650791373456)); +#88772 = ORIENTED_EDGE('',*,*,#85026,.F.); +#88773 = CYLINDRICAL_SURFACE('',#88774,3.E-02); +#88774 = AXIS2_PLACEMENT_3D('',#88775,#88776,#88777); +#88775 = CARTESIAN_POINT('',(-1.33371962769,-4.67,2.934602878549)); +#88776 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#88777 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#88778 = ADVANCED_FACE('',(#88779),#88798,.T.); +#88779 = FACE_BOUND('',#88780,.T.); +#88780 = EDGE_LOOP('',(#88781,#88782,#88790,#88797)); +#88781 = ORIENTED_EDGE('',*,*,#88748,.T.); +#88782 = ORIENTED_EDGE('',*,*,#88783,.F.); +#88783 = EDGE_CURVE('',#88784,#88740,#88786,.T.); +#88784 = VERTEX_POINT('',#88785); +#88785 = CARTESIAN_POINT('',(2.95,-3.57,2.95)); +#88786 = LINE('',#88787,#88788); +#88787 = CARTESIAN_POINT('',(-5.351621923388E-15,-3.57,2.95)); +#88788 = VECTOR('',#88789,1.); +#88789 = DIRECTION('',(-1.,8.673617379884E-16,0.)); +#88790 = ORIENTED_EDGE('',*,*,#88791,.F.); +#88791 = EDGE_CURVE('',#84880,#88784,#88792,.T.); +#88792 = CIRCLE('',#88793,3.E-02); +#88793 = AXIS2_PLACEMENT_3D('',#88794,#88795,#88796); +#88794 = CARTESIAN_POINT('',(2.95,-3.57,2.98)); +#88795 = DIRECTION('',(1.,0.,0.)); +#88796 = DIRECTION('',(0.,0.,-1.)); +#88797 = ORIENTED_EDGE('',*,*,#84905,.F.); +#88798 = CYLINDRICAL_SURFACE('',#88799,3.E-02); +#88799 = AXIS2_PLACEMENT_3D('',#88800,#88801,#88802); +#88800 = CARTESIAN_POINT('',(3.1,-3.57,2.98)); +#88801 = DIRECTION('',(1.,-8.673617379884E-16,-0.)); +#88802 = DIRECTION('',(8.673617379884E-16,1.,0.)); +#88803 = ADVANCED_FACE('',(#88804),#88817,.T.); +#88804 = FACE_BOUND('',#88805,.T.); +#88805 = EDGE_LOOP('',(#88806,#88807,#88808,#88809,#88816)); +#88806 = ORIENTED_EDGE('',*,*,#88766,.T.); +#88807 = ORIENTED_EDGE('',*,*,#85971,.F.); +#88808 = ORIENTED_EDGE('',*,*,#79600,.F.); +#88809 = ORIENTED_EDGE('',*,*,#88810,.F.); +#88810 = EDGE_CURVE('',#85035,#79593,#88811,.T.); +#88811 = CIRCLE('',#88812,3.E-02); +#88812 = AXIS2_PLACEMENT_3D('',#88813,#88814,#88815); +#88813 = CARTESIAN_POINT('',(-2.139365466512,-4.4,1.994682733256)); +#88814 = DIRECTION('',(0.,1.,0.)); +#88815 = DIRECTION('',(0.,-0.,1.)); +#88816 = ORIENTED_EDGE('',*,*,#85034,.F.); +#88817 = TOROIDAL_SURFACE('',#88818,0.27,3.E-02); +#88818 = AXIS2_PLACEMENT_3D('',#88819,#88820,#88821); +#88819 = CARTESIAN_POINT('',(-1.963651795679,-4.4,2.199682015895)); +#88820 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#88821 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#88822 = ADVANCED_FACE('',(#88823),#88843,.T.); +#88823 = FACE_BOUND('',#88824,.T.); +#88824 = EDGE_LOOP('',(#88825,#88826,#88835,#88842)); +#88825 = ORIENTED_EDGE('',*,*,#88791,.T.); +#88826 = ORIENTED_EDGE('',*,*,#88827,.F.); +#88827 = EDGE_CURVE('',#88828,#88784,#88830,.T.); +#88828 = VERTEX_POINT('',#88829); +#88829 = CARTESIAN_POINT('',(3.13,-3.75,2.95)); +#88830 = CIRCLE('',#88831,0.18); +#88831 = AXIS2_PLACEMENT_3D('',#88832,#88833,#88834); +#88832 = CARTESIAN_POINT('',(2.95,-3.75,2.95)); +#88833 = DIRECTION('',(0.,-0.,1.)); +#88834 = DIRECTION('',(1.,0.,0.)); +#88835 = ORIENTED_EDGE('',*,*,#88836,.F.); +#88836 = EDGE_CURVE('',#84938,#88828,#88837,.T.); +#88837 = CIRCLE('',#88838,3.E-02); +#88838 = AXIS2_PLACEMENT_3D('',#88839,#88840,#88841); +#88839 = CARTESIAN_POINT('',(3.13,-3.75,2.98)); +#88840 = DIRECTION('',(0.,-1.,-0.)); +#88841 = DIRECTION('',(0.,0.,-1.)); +#88842 = ORIENTED_EDGE('',*,*,#85740,.F.); +#88843 = TOROIDAL_SURFACE('',#88844,0.18,3.E-02); +#88844 = AXIS2_PLACEMENT_3D('',#88845,#88846,#88847); +#88845 = CARTESIAN_POINT('',(2.95,-3.75,2.98)); +#88846 = DIRECTION('',(0.,-0.,1.)); +#88847 = DIRECTION('',(1.,0.,0.)); +#88848 = ADVANCED_FACE('',(#88849),#88861,.T.); +#88849 = FACE_BOUND('',#88850,.T.); +#88850 = EDGE_LOOP('',(#88851,#88852,#88859,#88860)); +#88851 = ORIENTED_EDGE('',*,*,#79592,.F.); +#88852 = ORIENTED_EDGE('',*,*,#88853,.F.); +#88853 = EDGE_CURVE('',#85000,#79582,#88854,.T.); +#88854 = CIRCLE('',#88855,3.E-02); +#88855 = AXIS2_PLACEMENT_3D('',#88856,#88857,#88858); +#88856 = CARTESIAN_POINT('',(-2.139365466512,-4.2,1.994682733256)); +#88857 = DIRECTION('',(0.,1.,0.)); +#88858 = DIRECTION('',(0.,-0.,1.)); +#88859 = ORIENTED_EDGE('',*,*,#85043,.F.); +#88860 = ORIENTED_EDGE('',*,*,#88810,.T.); +#88861 = CYLINDRICAL_SURFACE('',#88862,3.E-02); +#88862 = AXIS2_PLACEMENT_3D('',#88863,#88864,#88865); +#88863 = CARTESIAN_POINT('',(-2.139365466512,-4.7,1.994682733256)); +#88864 = DIRECTION('',(0.,-1.,0.)); +#88865 = DIRECTION('',(0.,0.,-1.)); +#88866 = ADVANCED_FACE('',(#88867),#88886,.T.); +#88867 = FACE_BOUND('',#88868,.T.); +#88868 = EDGE_LOOP('',(#88869,#88870,#88878,#88885)); +#88869 = ORIENTED_EDGE('',*,*,#88836,.T.); +#88870 = ORIENTED_EDGE('',*,*,#88871,.F.); +#88871 = EDGE_CURVE('',#88872,#88828,#88874,.T.); +#88872 = VERTEX_POINT('',#88873); +#88873 = CARTESIAN_POINT('',(3.13,-4.55,2.95)); +#88874 = LINE('',#88875,#88876); +#88875 = CARTESIAN_POINT('',(3.13,2.6,2.95)); +#88876 = VECTOR('',#88877,1.); +#88877 = DIRECTION('',(7.885106708985E-16,1.,-0.)); +#88878 = ORIENTED_EDGE('',*,*,#88879,.F.); +#88879 = EDGE_CURVE('',#84920,#88872,#88880,.T.); +#88880 = CIRCLE('',#88881,3.E-02); +#88881 = AXIS2_PLACEMENT_3D('',#88882,#88883,#88884); +#88882 = CARTESIAN_POINT('',(3.13,-4.55,2.98)); +#88883 = DIRECTION('',(0.,-1.,-0.)); +#88884 = DIRECTION('',(0.,0.,-1.)); +#88885 = ORIENTED_EDGE('',*,*,#84945,.F.); +#88886 = CYLINDRICAL_SURFACE('',#88887,3.E-02); +#88887 = AXIS2_PLACEMENT_3D('',#88888,#88889,#88890); +#88888 = CARTESIAN_POINT('',(3.13,-4.7,2.98)); +#88889 = DIRECTION('',(-7.885106708985E-16,-1.,0.)); +#88890 = DIRECTION('',(1.,-7.885106708985E-16,0.)); +#88891 = ADVANCED_FACE('',(#88892),#88905,.T.); +#88892 = FACE_BOUND('',#88893,.T.); +#88893 = EDGE_LOOP('',(#88894,#88895,#88896,#88897,#88904)); +#88894 = ORIENTED_EDGE('',*,*,#88853,.T.); +#88895 = ORIENTED_EDGE('',*,*,#79581,.T.); +#88896 = ORIENTED_EDGE('',*,*,#85995,.F.); +#88897 = ORIENTED_EDGE('',*,*,#88898,.F.); +#88898 = EDGE_CURVE('',#85002,#84960,#88899,.T.); +#88899 = CIRCLE('',#88900,3.E-02); +#88900 = AXIS2_PLACEMENT_3D('',#88901,#88902,#88903); +#88901 = CARTESIAN_POINT('',(-1.963651795679,-3.93,2.199682015895)); +#88902 = DIRECTION('',(0.650791373456,-0.,0.759256602365)); +#88903 = DIRECTION('',(0.759256602365,0.,-0.650791373456)); +#88904 = ORIENTED_EDGE('',*,*,#84999,.F.); +#88905 = TOROIDAL_SURFACE('',#88906,0.27,3.E-02); +#88906 = AXIS2_PLACEMENT_3D('',#88907,#88908,#88909); +#88907 = CARTESIAN_POINT('',(-1.963651795679,-4.2,2.199682015895)); +#88908 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#88909 = DIRECTION('',(0.650791373456,0.,0.759256602365)); +#88910 = ADVANCED_FACE('',(#88911),#88931,.T.); +#88911 = FACE_BOUND('',#88912,.T.); +#88912 = EDGE_LOOP('',(#88913,#88914,#88923,#88930)); +#88913 = ORIENTED_EDGE('',*,*,#88879,.T.); +#88914 = ORIENTED_EDGE('',*,*,#88915,.F.); +#88915 = EDGE_CURVE('',#88916,#88872,#88918,.T.); +#88916 = VERTEX_POINT('',#88917); +#88917 = CARTESIAN_POINT('',(3.25,-4.67,2.95)); +#88918 = CIRCLE('',#88919,0.12); +#88919 = AXIS2_PLACEMENT_3D('',#88920,#88921,#88922); +#88920 = CARTESIAN_POINT('',(3.25,-4.55,2.95)); +#88921 = DIRECTION('',(0.,0.,-1.)); +#88922 = DIRECTION('',(1.,0.,0.)); +#88923 = ORIENTED_EDGE('',*,*,#88924,.F.); +#88924 = EDGE_CURVE('',#82046,#88916,#88925,.T.); +#88925 = CIRCLE('',#88926,3.E-02); +#88926 = AXIS2_PLACEMENT_3D('',#88927,#88928,#88929); +#88927 = CARTESIAN_POINT('',(3.25,-4.67,2.98)); +#88928 = DIRECTION('',(1.,0.,0.)); +#88929 = DIRECTION('',(0.,0.,-1.)); +#88930 = ORIENTED_EDGE('',*,*,#85677,.F.); +#88931 = TOROIDAL_SURFACE('',#88932,0.12,3.E-02); +#88932 = AXIS2_PLACEMENT_3D('',#88933,#88934,#88935); +#88933 = CARTESIAN_POINT('',(3.25,-4.55,2.98)); +#88934 = DIRECTION('',(0.,-0.,1.)); +#88935 = DIRECTION('',(1.,0.,0.)); +#88936 = ADVANCED_FACE('',(#88937),#88949,.T.); +#88937 = FACE_BOUND('',#88938,.T.); +#88938 = EDGE_LOOP('',(#88939,#88940,#88941,#88948)); +#88939 = ORIENTED_EDGE('',*,*,#88898,.T.); +#88940 = ORIENTED_EDGE('',*,*,#84985,.F.); +#88941 = ORIENTED_EDGE('',*,*,#88942,.F.); +#88942 = EDGE_CURVE('',#85011,#84978,#88943,.T.); +#88943 = CIRCLE('',#88944,3.E-02); +#88944 = AXIS2_PLACEMENT_3D('',#88945,#88946,#88947); +#88945 = CARTESIAN_POINT('',(-1.33371962769,-3.93,2.934602878549)); +#88946 = DIRECTION('',(0.650791373456,9.40785894581E-15,0.759256602365) + ); +#88947 = DIRECTION('',(0.759256602365,4.434254405868E-29,-0.650791373456 + )); +#88948 = ORIENTED_EDGE('',*,*,#85010,.F.); +#88949 = CYLINDRICAL_SURFACE('',#88950,3.E-02); +#88950 = AXIS2_PLACEMENT_3D('',#88951,#88952,#88953); +#88951 = CARTESIAN_POINT('',(-1.33371962769,-3.93,2.934602878549)); +#88952 = DIRECTION('',(-0.650791373456,0.,-0.759256602365)); +#88953 = DIRECTION('',(-0.759256602365,0.,0.650791373456)); +#88954 = ADVANCED_FACE('',(#88955),#88974,.T.); +#88955 = FACE_BOUND('',#88956,.T.); +#88956 = EDGE_LOOP('',(#88957,#88958,#88966,#88973)); +#88957 = ORIENTED_EDGE('',*,*,#88924,.T.); +#88958 = ORIENTED_EDGE('',*,*,#88959,.F.); +#88959 = EDGE_CURVE('',#88960,#88916,#88962,.T.); +#88960 = VERTEX_POINT('',#88961); +#88961 = CARTESIAN_POINT('',(3.47,-4.67,2.95)); +#88962 = LINE('',#88963,#88964); +#88963 = CARTESIAN_POINT('',(0.,-4.67,2.95)); +#88964 = VECTOR('',#88965,1.); +#88965 = DIRECTION('',(-1.,0.,0.)); +#88966 = ORIENTED_EDGE('',*,*,#88967,.F.); +#88967 = EDGE_CURVE('',#82054,#88960,#88968,.T.); +#88968 = CIRCLE('',#88969,3.E-02); +#88969 = AXIS2_PLACEMENT_3D('',#88970,#88971,#88972); +#88970 = CARTESIAN_POINT('',(3.47,-4.67,2.98)); +#88971 = DIRECTION('',(1.,0.,0.)); +#88972 = DIRECTION('',(0.,0.,-1.)); +#88973 = ORIENTED_EDGE('',*,*,#82053,.F.); +#88974 = CYLINDRICAL_SURFACE('',#88975,3.E-02); +#88975 = AXIS2_PLACEMENT_3D('',#88976,#88977,#88978); +#88976 = CARTESIAN_POINT('',(0.,-4.67,2.98)); +#88977 = DIRECTION('',(-1.,0.,0.)); +#88978 = DIRECTION('',(0.,0.,1.)); +#88979 = ADVANCED_FACE('',(#88980),#88992,.T.); +#88980 = FACE_BOUND('',#88981,.T.); +#88981 = EDGE_LOOP('',(#88982,#88983,#88984,#88991)); +#88982 = ORIENTED_EDGE('',*,*,#88942,.T.); +#88983 = ORIENTED_EDGE('',*,*,#85173,.F.); +#88984 = ORIENTED_EDGE('',*,*,#88985,.F.); +#88985 = EDGE_CURVE('',#85198,#85166,#88986,.T.); +#88986 = CIRCLE('',#88987,3.E-02); +#88987 = AXIS2_PLACEMENT_3D('',#88988,#88989,#88990); +#88988 = CARTESIAN_POINT('',(-1.25,-3.93,2.979133604522)); +#88989 = DIRECTION('',(0.993335419398,7.179842798121E-15,0.115259466289) + ); +#88990 = DIRECTION('',(0.115259466289,-1.897936125685E-31, + -0.993335419398)); +#88991 = ORIENTED_EDGE('',*,*,#85206,.F.); +#88992 = TOROIDAL_SURFACE('',#88993,0.13,3.E-02); +#88993 = AXIS2_PLACEMENT_3D('',#88994,#88995,#88996); +#88994 = CARTESIAN_POINT('',(-1.235016269382,-3.93,2.85)); +#88995 = DIRECTION('',(-0.,-1.,0.)); +#88996 = DIRECTION('',(-0.,0.,-1.)); +#88997 = ADVANCED_FACE('',(#88998),#89018,.T.); +#88998 = FACE_BOUND('',#88999,.T.); +#88999 = EDGE_LOOP('',(#89000,#89001,#89010,#89017)); +#89000 = ORIENTED_EDGE('',*,*,#88967,.T.); +#89001 = ORIENTED_EDGE('',*,*,#89002,.F.); +#89002 = EDGE_CURVE('',#89003,#88960,#89005,.T.); +#89003 = VERTEX_POINT('',#89004); +#89004 = CARTESIAN_POINT('',(4.17,-4.67,2.25)); +#89005 = CIRCLE('',#89006,0.7); +#89006 = AXIS2_PLACEMENT_3D('',#89007,#89008,#89009); +#89007 = CARTESIAN_POINT('',(3.47,-4.67,2.25)); +#89008 = DIRECTION('',(-0.,-1.,0.)); +#89009 = DIRECTION('',(2.230358754827E-14,-0.,1.)); +#89010 = ORIENTED_EDGE('',*,*,#89011,.F.); +#89011 = EDGE_CURVE('',#82062,#89003,#89012,.T.); +#89012 = CIRCLE('',#89013,3.E-02); +#89013 = AXIS2_PLACEMENT_3D('',#89014,#89015,#89016); +#89014 = CARTESIAN_POINT('',(4.2,-4.67,2.25)); +#89015 = DIRECTION('',(-1.445602896647E-14,0.,-1.)); +#89016 = DIRECTION('',(-1.,0.,1.445602896647E-14)); +#89017 = ORIENTED_EDGE('',*,*,#82061,.F.); +#89018 = TOROIDAL_SURFACE('',#89019,0.73,3.E-02); +#89019 = AXIS2_PLACEMENT_3D('',#89020,#89021,#89022); +#89020 = CARTESIAN_POINT('',(3.47,-4.67,2.25)); +#89021 = DIRECTION('',(0.,1.,0.)); +#89022 = DIRECTION('',(0.,-0.,1.)); +#89023 = ADVANCED_FACE('',(#89024),#89036,.T.); +#89024 = FACE_BOUND('',#89025,.T.); +#89025 = EDGE_LOOP('',(#89026,#89027,#89028,#89035)); +#89026 = ORIENTED_EDGE('',*,*,#88985,.T.); +#89027 = ORIENTED_EDGE('',*,*,#85872,.F.); +#89028 = ORIENTED_EDGE('',*,*,#89029,.F.); +#89029 = EDGE_CURVE('',#81042,#85873,#89030,.T.); +#89030 = CIRCLE('',#89031,3.E-02); +#89031 = AXIS2_PLACEMENT_3D('',#89032,#89033,#89034); +#89032 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,2.98)); +#89033 = DIRECTION('',(0.996529282876,8.324294787558E-02,0.)); +#89034 = DIRECTION('',(-8.324294787558E-02,0.996529282876,0.)); +#89035 = ORIENTED_EDGE('',*,*,#85197,.F.); +#89036 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(3,2,( + (#89037,#89038,#89039) + ,(#89040,#89041,#89042) + ,(#89043,#89044,#89045) + ,(#89046,#89047,#89048 +)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((4,4),(3,3),( + 0.,1.502175458367E-05),(0.,1.),.PIECEWISE_BEZIER_KNOTS.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,0.707106781187,1.) + ,(1.,0.705977289088,1.) + ,(1.,0.70597365948,1.) +,(1.,0.707106781187,1.))) REPRESENTATION_ITEM('') SURFACE() ); +#89037 = CARTESIAN_POINT('',(-1.25,-3.9,2.979133604522)); +#89038 = CARTESIAN_POINT('',(-1.246542216011,-3.9,2.94933354194)); +#89039 = CARTESIAN_POINT('',(-1.246542216011,-3.93,2.94933354194)); +#89040 = CARTESIAN_POINT('',(-1.245844690046,-3.9,2.979712162686)); +#89041 = CARTESIAN_POINT('',(-1.243521825627,-3.899904042323, + 2.949683973493)); +#89042 = CARTESIAN_POINT('',(-1.242706530515,-3.930000006634, + 2.949778607176)); +#89043 = CARTESIAN_POINT('',(-1.241682234358,-3.899827613934, + 2.979999993657)); +#89044 = CARTESIAN_POINT('',(-1.240540569704,-3.899732225986, + 2.949903726698)); +#89045 = CARTESIAN_POINT('',(-1.238864285369,-3.929793119298,2.95)); +#89046 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,2.98)); +#89047 = CARTESIAN_POINT('',(-1.237513557819,-3.899479392431,2.95)); +#89048 = CARTESIAN_POINT('',(-1.235016269382,-3.929375270918,2.95)); +#89049 = ADVANCED_FACE('',(#89050),#89068,.T.); +#89050 = FACE_BOUND('',#89051,.T.); +#89051 = EDGE_LOOP('',(#89052,#89053,#89059,#89060,#89067)); +#89052 = ORIENTED_EDGE('',*,*,#89011,.T.); +#89053 = ORIENTED_EDGE('',*,*,#89054,.T.); +#89054 = EDGE_CURVE('',#89003,#80968,#89055,.T.); +#89055 = LINE('',#89056,#89057); +#89056 = CARTESIAN_POINT('',(4.17,-4.67,0.)); +#89057 = VECTOR('',#89058,1.); +#89058 = DIRECTION('',(-0.,-0.,-1.)); +#89059 = ORIENTED_EDGE('',*,*,#81009,.F.); +#89060 = ORIENTED_EDGE('',*,*,#89061,.F.); +#89061 = EDGE_CURVE('',#82011,#81001,#89062,.T.); +#89062 = CIRCLE('',#89063,3.E-02); +#89063 = AXIS2_PLACEMENT_3D('',#89064,#89065,#89066); +#89064 = CARTESIAN_POINT('',(4.2,-4.67,-0.45)); +#89065 = DIRECTION('',(-0.,0.,-1.)); +#89066 = DIRECTION('',(-1.,0.,0.)); +#89067 = ORIENTED_EDGE('',*,*,#82070,.F.); +#89068 = CYLINDRICAL_SURFACE('',#89069,3.E-02); +#89069 = AXIS2_PLACEMENT_3D('',#89070,#89071,#89072); +#89070 = CARTESIAN_POINT('',(4.2,-4.67,0.)); +#89071 = DIRECTION('',(0.,0.,1.)); +#89072 = DIRECTION('',(1.,0.,-0.)); +#89073 = ADVANCED_FACE('',(#89074),#89095,.T.); +#89074 = FACE_BOUND('',#89075,.T.); +#89075 = EDGE_LOOP('',(#89076,#89077,#89078,#89087,#89094)); +#89076 = ORIENTED_EDGE('',*,*,#89029,.T.); +#89077 = ORIENTED_EDGE('',*,*,#85881,.F.); +#89078 = ORIENTED_EDGE('',*,*,#89079,.F.); +#89079 = EDGE_CURVE('',#89080,#85840,#89082,.T.); +#89080 = VERTEX_POINT('',#89081); +#89081 = CARTESIAN_POINT('',(-1.07,-3.75,2.95)); +#89082 = CIRCLE('',#89083,3.E-02); +#89083 = AXIS2_PLACEMENT_3D('',#89084,#89085,#89086); +#89084 = CARTESIAN_POINT('',(-1.07,-3.75,2.98)); +#89085 = DIRECTION('',(0.,1.,0.)); +#89086 = DIRECTION('',(0.,-0.,1.)); +#89087 = ORIENTED_EDGE('',*,*,#89088,.T.); +#89088 = EDGE_CURVE('',#89080,#81026,#89089,.T.); +#89089 = CIRCLE('',#89090,0.18); +#89090 = AXIS2_PLACEMENT_3D('',#89091,#89092,#89093); +#89091 = CARTESIAN_POINT('',(-1.25,-3.75,2.95)); +#89092 = DIRECTION('',(0.,0.,-1.)); +#89093 = DIRECTION('',(1.,0.,0.)); +#89094 = ORIENTED_EDGE('',*,*,#81049,.F.); +#89095 = TOROIDAL_SURFACE('',#89096,0.18,3.E-02); +#89096 = AXIS2_PLACEMENT_3D('',#89097,#89098,#89099); +#89097 = CARTESIAN_POINT('',(-1.25,-3.75,2.98)); +#89098 = DIRECTION('',(0.,-0.,1.)); +#89099 = DIRECTION('',(1.,0.,0.)); +#89100 = ADVANCED_FACE('',(#89101),#89113,.T.); +#89101 = FACE_BOUND('',#89102,.T.); +#89102 = EDGE_LOOP('',(#89103,#89104,#89105,#89112)); +#89103 = ORIENTED_EDGE('',*,*,#89061,.T.); +#89104 = ORIENTED_EDGE('',*,*,#81000,.F.); +#89105 = ORIENTED_EDGE('',*,*,#89106,.F.); +#89106 = EDGE_CURVE('',#83828,#80993,#89107,.T.); +#89107 = CIRCLE('',#89108,3.E-02); +#89108 = AXIS2_PLACEMENT_3D('',#89109,#89110,#89111); +#89109 = CARTESIAN_POINT('',(4.2,-4.3,-0.82)); +#89110 = DIRECTION('',(0.,1.,0.)); +#89111 = DIRECTION('',(0.,-0.,1.)); +#89112 = ORIENTED_EDGE('',*,*,#84212,.F.); +#89113 = TOROIDAL_SURFACE('',#89114,0.37,3.E-02); +#89114 = AXIS2_PLACEMENT_3D('',#89115,#89116,#89117); +#89115 = CARTESIAN_POINT('',(4.2,-4.3,-0.45)); +#89116 = DIRECTION('',(1.,0.,0.)); +#89117 = DIRECTION('',(0.,0.,-1.)); +#89118 = ADVANCED_FACE('',(#89119),#89139,.T.); +#89119 = FACE_BOUND('',#89120,.T.); +#89120 = EDGE_LOOP('',(#89121,#89122,#89123,#89132)); +#89121 = ORIENTED_EDGE('',*,*,#89079,.T.); +#89122 = ORIENTED_EDGE('',*,*,#85839,.F.); +#89123 = ORIENTED_EDGE('',*,*,#89124,.F.); +#89124 = EDGE_CURVE('',#89125,#84840,#89127,.T.); +#89125 = VERTEX_POINT('',#89126); +#89126 = CARTESIAN_POINT('',(-1.25,-3.57,2.95)); +#89127 = CIRCLE('',#89128,3.E-02); +#89128 = AXIS2_PLACEMENT_3D('',#89129,#89130,#89131); +#89129 = CARTESIAN_POINT('',(-1.25,-3.57,2.98)); +#89130 = DIRECTION('',(-1.,0.,-0.)); +#89131 = DIRECTION('',(-0.,0.,1.)); +#89132 = ORIENTED_EDGE('',*,*,#89133,.F.); +#89133 = EDGE_CURVE('',#89080,#89125,#89134,.T.); +#89134 = CIRCLE('',#89135,0.18); +#89135 = AXIS2_PLACEMENT_3D('',#89136,#89137,#89138); +#89136 = CARTESIAN_POINT('',(-1.25,-3.75,2.95)); +#89137 = DIRECTION('',(0.,-0.,1.)); +#89138 = DIRECTION('',(1.,0.,0.)); +#89139 = TOROIDAL_SURFACE('',#89140,0.18,3.E-02); +#89140 = AXIS2_PLACEMENT_3D('',#89141,#89142,#89143); +#89141 = CARTESIAN_POINT('',(-1.25,-3.75,2.98)); +#89142 = DIRECTION('',(0.,-0.,1.)); +#89143 = DIRECTION('',(1.,0.,0.)); +#89144 = ADVANCED_FACE('',(#89145),#89157,.T.); +#89145 = FACE_BOUND('',#89146,.T.); +#89146 = EDGE_LOOP('',(#89147,#89148,#89149,#89156)); +#89147 = ORIENTED_EDGE('',*,*,#89106,.T.); +#89148 = ORIENTED_EDGE('',*,*,#80992,.F.); +#89149 = ORIENTED_EDGE('',*,*,#89150,.F.); +#89150 = EDGE_CURVE('',#83810,#80984,#89151,.T.); +#89151 = CIRCLE('',#89152,3.E-02); +#89152 = AXIS2_PLACEMENT_3D('',#89153,#89154,#89155); +#89153 = CARTESIAN_POINT('',(4.2,-4.05,-0.82)); +#89154 = DIRECTION('',(0.,1.,0.)); +#89155 = DIRECTION('',(0.,-0.,1.)); +#89156 = ORIENTED_EDGE('',*,*,#83835,.F.); +#89157 = CYLINDRICAL_SURFACE('',#89158,3.E-02); +#89158 = AXIS2_PLACEMENT_3D('',#89159,#89160,#89161); +#89159 = CARTESIAN_POINT('',(4.2,0.,-0.82)); +#89160 = DIRECTION('',(-0.,1.,0.)); +#89161 = DIRECTION('',(0.,0.,1.)); +#89162 = ADVANCED_FACE('',(#89163),#89182,.T.); +#89163 = FACE_BOUND('',#89164,.T.); +#89164 = EDGE_LOOP('',(#89165,#89166,#89167,#89176)); +#89165 = ORIENTED_EDGE('',*,*,#89124,.T.); +#89166 = ORIENTED_EDGE('',*,*,#84865,.F.); +#89167 = ORIENTED_EDGE('',*,*,#89168,.F.); +#89168 = EDGE_CURVE('',#89169,#84858,#89171,.T.); +#89169 = VERTEX_POINT('',#89170); +#89170 = CARTESIAN_POINT('',(-2.95,-3.57,2.95)); +#89171 = CIRCLE('',#89172,3.E-02); +#89172 = AXIS2_PLACEMENT_3D('',#89173,#89174,#89175); +#89173 = CARTESIAN_POINT('',(-2.95,-3.57,2.98)); +#89174 = DIRECTION('',(-1.,0.,-0.)); +#89175 = DIRECTION('',(-0.,0.,1.)); +#89176 = ORIENTED_EDGE('',*,*,#89177,.F.); +#89177 = EDGE_CURVE('',#89125,#89169,#89178,.T.); +#89178 = LINE('',#89179,#89180); +#89179 = CARTESIAN_POINT('',(0.,-3.57,2.95)); +#89180 = VECTOR('',#89181,1.); +#89181 = DIRECTION('',(-1.,-0.,-0.)); +#89182 = CYLINDRICAL_SURFACE('',#89183,3.E-02); +#89183 = AXIS2_PLACEMENT_3D('',#89184,#89185,#89186); +#89184 = CARTESIAN_POINT('',(-3.1,-3.57,2.98)); +#89185 = DIRECTION('',(1.,0.,0.)); +#89186 = DIRECTION('',(0.,0.,-1.)); +#89187 = ADVANCED_FACE('',(#89188),#89200,.T.); +#89188 = FACE_BOUND('',#89189,.T.); +#89189 = EDGE_LOOP('',(#89190,#89191,#89192,#89199)); +#89190 = ORIENTED_EDGE('',*,*,#89150,.T.); +#89191 = ORIENTED_EDGE('',*,*,#80983,.F.); +#89192 = ORIENTED_EDGE('',*,*,#89193,.F.); +#89193 = EDGE_CURVE('',#83788,#80976,#89194,.T.); +#89194 = CIRCLE('',#89195,3.E-02); +#89195 = AXIS2_PLACEMENT_3D('',#89196,#89197,#89198); +#89196 = CARTESIAN_POINT('',(4.2,-3.68,-0.45)); +#89197 = DIRECTION('',(0.,-0.,1.)); +#89198 = DIRECTION('',(1.,0.,0.)); +#89199 = ORIENTED_EDGE('',*,*,#84236,.F.); +#89200 = TOROIDAL_SURFACE('',#89201,0.37,3.E-02); +#89201 = AXIS2_PLACEMENT_3D('',#89202,#89203,#89204); +#89202 = CARTESIAN_POINT('',(4.2,-4.05,-0.45)); +#89203 = DIRECTION('',(1.,0.,0.)); +#89204 = DIRECTION('',(0.,0.,-1.)); +#89205 = ADVANCED_FACE('',(#89206),#89226,.T.); +#89206 = FACE_BOUND('',#89207,.T.); +#89207 = EDGE_LOOP('',(#89208,#89209,#89210,#89219)); +#89208 = ORIENTED_EDGE('',*,*,#89168,.T.); +#89209 = ORIENTED_EDGE('',*,*,#85716,.F.); +#89210 = ORIENTED_EDGE('',*,*,#89211,.F.); +#89211 = EDGE_CURVE('',#89212,#84800,#89214,.T.); +#89212 = VERTEX_POINT('',#89213); +#89213 = CARTESIAN_POINT('',(-3.13,-3.75,2.95)); +#89214 = CIRCLE('',#89215,3.E-02); +#89215 = AXIS2_PLACEMENT_3D('',#89216,#89217,#89218); +#89216 = CARTESIAN_POINT('',(-3.13,-3.75,2.98)); +#89217 = DIRECTION('',(0.,-1.,0.)); +#89218 = DIRECTION('',(0.,0.,-1.)); +#89219 = ORIENTED_EDGE('',*,*,#89220,.F.); +#89220 = EDGE_CURVE('',#89169,#89212,#89221,.T.); +#89221 = CIRCLE('',#89222,0.18); +#89222 = AXIS2_PLACEMENT_3D('',#89223,#89224,#89225); +#89223 = CARTESIAN_POINT('',(-2.95,-3.75,2.95)); +#89224 = DIRECTION('',(0.,-0.,1.)); +#89225 = DIRECTION('',(1.,0.,0.)); +#89226 = TOROIDAL_SURFACE('',#89227,0.18,3.E-02); +#89227 = AXIS2_PLACEMENT_3D('',#89228,#89229,#89230); +#89228 = CARTESIAN_POINT('',(-2.95,-3.75,2.98)); +#89229 = DIRECTION('',(0.,-0.,1.)); +#89230 = DIRECTION('',(1.,0.,0.)); +#89231 = ADVANCED_FACE('',(#89232),#89252,.T.); +#89232 = FACE_BOUND('',#89233,.T.); +#89233 = EDGE_LOOP('',(#89234,#89235,#89236,#89244,#89251)); +#89234 = ORIENTED_EDGE('',*,*,#89193,.T.); +#89235 = ORIENTED_EDGE('',*,*,#80975,.F.); +#89236 = ORIENTED_EDGE('',*,*,#89237,.F.); +#89237 = EDGE_CURVE('',#89238,#80966,#89240,.T.); +#89238 = VERTEX_POINT('',#89239); +#89239 = CARTESIAN_POINT('',(4.17,-3.68,1.25)); +#89240 = LINE('',#89241,#89242); +#89241 = CARTESIAN_POINT('',(4.17,-3.68,0.)); +#89242 = VECTOR('',#89243,1.); +#89243 = DIRECTION('',(0.,-0.,-1.)); +#89244 = ORIENTED_EDGE('',*,*,#89245,.F.); +#89245 = EDGE_CURVE('',#83770,#89238,#89246,.T.); +#89246 = CIRCLE('',#89247,3.E-02); +#89247 = AXIS2_PLACEMENT_3D('',#89248,#89249,#89250); +#89248 = CARTESIAN_POINT('',(4.2,-3.68,1.25)); +#89249 = DIRECTION('',(0.,-0.,1.)); +#89250 = DIRECTION('',(1.,0.,0.)); +#89251 = ORIENTED_EDGE('',*,*,#83795,.F.); +#89252 = CYLINDRICAL_SURFACE('',#89253,3.E-02); +#89253 = AXIS2_PLACEMENT_3D('',#89254,#89255,#89256); +#89254 = CARTESIAN_POINT('',(4.2,-3.68,-0.85)); +#89255 = DIRECTION('',(-0.,0.,1.)); +#89256 = DIRECTION('',(1.,0.,0.)); +#89257 = ADVANCED_FACE('',(#89258),#89277,.T.); +#89258 = FACE_BOUND('',#89259,.T.); +#89259 = EDGE_LOOP('',(#89260,#89261,#89262,#89271)); +#89260 = ORIENTED_EDGE('',*,*,#89211,.T.); +#89261 = ORIENTED_EDGE('',*,*,#84825,.F.); +#89262 = ORIENTED_EDGE('',*,*,#89263,.F.); +#89263 = EDGE_CURVE('',#89264,#84818,#89266,.T.); +#89264 = VERTEX_POINT('',#89265); +#89265 = CARTESIAN_POINT('',(-3.13,-4.55,2.95)); +#89266 = CIRCLE('',#89267,3.E-02); +#89267 = AXIS2_PLACEMENT_3D('',#89268,#89269,#89270); +#89268 = CARTESIAN_POINT('',(-3.13,-4.55,2.98)); +#89269 = DIRECTION('',(0.,-1.,0.)); +#89270 = DIRECTION('',(0.,0.,-1.)); +#89271 = ORIENTED_EDGE('',*,*,#89272,.F.); +#89272 = EDGE_CURVE('',#89212,#89264,#89273,.T.); +#89273 = LINE('',#89274,#89275); +#89274 = CARTESIAN_POINT('',(-3.13,2.6,2.95)); +#89275 = VECTOR('',#89276,1.); +#89276 = DIRECTION('',(-0.,-1.,-0.)); +#89277 = CYLINDRICAL_SURFACE('',#89278,3.E-02); +#89278 = AXIS2_PLACEMENT_3D('',#89279,#89280,#89281); +#89279 = CARTESIAN_POINT('',(-3.13,-4.7,2.98)); +#89280 = DIRECTION('',(0.,1.,0.)); +#89281 = DIRECTION('',(0.,-0.,1.)); +#89282 = ADVANCED_FACE('',(#89283),#89303,.T.); +#89283 = FACE_BOUND('',#89284,.T.); +#89284 = EDGE_LOOP('',(#89285,#89286,#89295,#89302)); +#89285 = ORIENTED_EDGE('',*,*,#89245,.T.); +#89286 = ORIENTED_EDGE('',*,*,#89287,.F.); +#89287 = EDGE_CURVE('',#89288,#89238,#89290,.T.); +#89288 = VERTEX_POINT('',#89289); +#89289 = CARTESIAN_POINT('',(4.17,-3.45,1.48)); +#89290 = CIRCLE('',#89291,0.23); +#89291 = AXIS2_PLACEMENT_3D('',#89292,#89293,#89294); +#89292 = CARTESIAN_POINT('',(4.17,-3.45,1.25)); +#89293 = DIRECTION('',(1.,0.,0.)); +#89294 = DIRECTION('',(0.,0.,-1.)); +#89295 = ORIENTED_EDGE('',*,*,#89296,.F.); +#89296 = EDGE_CURVE('',#81932,#89288,#89297,.T.); +#89297 = CIRCLE('',#89298,3.E-02); +#89298 = AXIS2_PLACEMENT_3D('',#89299,#89300,#89301); +#89299 = CARTESIAN_POINT('',(4.2,-3.45,1.48)); +#89300 = DIRECTION('',(0.,1.,0.)); +#89301 = DIRECTION('',(0.,-0.,1.)); +#89302 = ORIENTED_EDGE('',*,*,#84475,.F.); +#89303 = TOROIDAL_SURFACE('',#89304,0.23,3.E-02); +#89304 = AXIS2_PLACEMENT_3D('',#89305,#89306,#89307); +#89305 = CARTESIAN_POINT('',(4.2,-3.45,1.25)); +#89306 = DIRECTION('',(1.,0.,0.)); +#89307 = DIRECTION('',(0.,0.,-1.)); +#89308 = ADVANCED_FACE('',(#89309),#89329,.T.); +#89309 = FACE_BOUND('',#89310,.T.); +#89310 = EDGE_LOOP('',(#89311,#89312,#89313,#89322)); +#89311 = ORIENTED_EDGE('',*,*,#89263,.T.); +#89312 = ORIENTED_EDGE('',*,*,#85701,.F.); +#89313 = ORIENTED_EDGE('',*,*,#89314,.F.); +#89314 = EDGE_CURVE('',#89315,#81800,#89317,.T.); +#89315 = VERTEX_POINT('',#89316); +#89316 = CARTESIAN_POINT('',(-3.25,-4.67,2.95)); +#89317 = CIRCLE('',#89318,3.E-02); +#89318 = AXIS2_PLACEMENT_3D('',#89319,#89320,#89321); +#89319 = CARTESIAN_POINT('',(-3.25,-4.67,2.98)); +#89320 = DIRECTION('',(-1.,0.,-0.)); +#89321 = DIRECTION('',(-0.,0.,1.)); +#89322 = ORIENTED_EDGE('',*,*,#89323,.F.); +#89323 = EDGE_CURVE('',#89264,#89315,#89324,.T.); +#89324 = CIRCLE('',#89325,0.12); +#89325 = AXIS2_PLACEMENT_3D('',#89326,#89327,#89328); +#89326 = CARTESIAN_POINT('',(-3.25,-4.55,2.95)); +#89327 = DIRECTION('',(0.,0.,-1.)); +#89328 = DIRECTION('',(1.,0.,0.)); +#89329 = TOROIDAL_SURFACE('',#89330,0.12,3.E-02); +#89330 = AXIS2_PLACEMENT_3D('',#89331,#89332,#89333); +#89331 = CARTESIAN_POINT('',(-3.25,-4.55,2.98)); +#89332 = DIRECTION('',(0.,-0.,1.)); +#89333 = DIRECTION('',(1.,0.,0.)); +#89334 = ADVANCED_FACE('',(#89335),#89354,.T.); +#89335 = FACE_BOUND('',#89336,.T.); +#89336 = EDGE_LOOP('',(#89337,#89338,#89346,#89353)); +#89337 = ORIENTED_EDGE('',*,*,#89296,.T.); +#89338 = ORIENTED_EDGE('',*,*,#89339,.F.); +#89339 = EDGE_CURVE('',#89340,#89288,#89342,.T.); +#89340 = VERTEX_POINT('',#89341); +#89341 = CARTESIAN_POINT('',(4.17,-3.4,1.48)); +#89342 = LINE('',#89343,#89344); +#89343 = CARTESIAN_POINT('',(4.17,-3.45,1.48)); +#89344 = VECTOR('',#89345,1.); +#89345 = DIRECTION('',(-0.,-1.,0.)); +#89346 = ORIENTED_EDGE('',*,*,#89347,.F.); +#89347 = EDGE_CURVE('',#81914,#89340,#89348,.T.); +#89348 = CIRCLE('',#89349,3.E-02); +#89349 = AXIS2_PLACEMENT_3D('',#89350,#89351,#89352); +#89350 = CARTESIAN_POINT('',(4.2,-3.4,1.48)); +#89351 = DIRECTION('',(0.,1.,0.)); +#89352 = DIRECTION('',(0.,-0.,1.)); +#89353 = ORIENTED_EDGE('',*,*,#81939,.F.); +#89354 = CYLINDRICAL_SURFACE('',#89355,3.E-02); +#89355 = AXIS2_PLACEMENT_3D('',#89356,#89357,#89358); +#89356 = CARTESIAN_POINT('',(4.2,0.,1.48)); +#89357 = DIRECTION('',(0.,-1.,0.)); +#89358 = DIRECTION('',(0.,0.,-1.)); +#89359 = ADVANCED_FACE('',(#89360),#89379,.T.); +#89360 = FACE_BOUND('',#89361,.T.); +#89361 = EDGE_LOOP('',(#89362,#89363,#89364,#89373)); +#89362 = ORIENTED_EDGE('',*,*,#89314,.T.); +#89363 = ORIENTED_EDGE('',*,*,#81859,.F.); +#89364 = ORIENTED_EDGE('',*,*,#89365,.F.); +#89365 = EDGE_CURVE('',#89366,#81851,#89368,.T.); +#89366 = VERTEX_POINT('',#89367); +#89367 = CARTESIAN_POINT('',(-3.47,-4.67,2.95)); +#89368 = CIRCLE('',#89369,3.E-02); +#89369 = AXIS2_PLACEMENT_3D('',#89370,#89371,#89372); +#89370 = CARTESIAN_POINT('',(-3.47,-4.67,2.98)); +#89371 = DIRECTION('',(-1.,-1.445602896647E-14,0.)); +#89372 = DIRECTION('',(1.445602896647E-14,-1.,0.)); +#89373 = ORIENTED_EDGE('',*,*,#89374,.F.); +#89374 = EDGE_CURVE('',#89315,#89366,#89375,.T.); +#89375 = LINE('',#89376,#89377); +#89376 = CARTESIAN_POINT('',(0.,-4.67,2.95)); +#89377 = VECTOR('',#89378,1.); +#89378 = DIRECTION('',(-1.,0.,0.)); +#89379 = CYLINDRICAL_SURFACE('',#89380,3.E-02); +#89380 = AXIS2_PLACEMENT_3D('',#89381,#89382,#89383); +#89381 = CARTESIAN_POINT('',(0.,-4.67,2.98)); +#89382 = DIRECTION('',(-1.,0.,0.)); +#89383 = DIRECTION('',(0.,0.,1.)); +#89384 = ADVANCED_FACE('',(#89385),#89405,.T.); +#89385 = FACE_BOUND('',#89386,.T.); +#89386 = EDGE_LOOP('',(#89387,#89388,#89397,#89404)); +#89387 = ORIENTED_EDGE('',*,*,#89347,.T.); +#89388 = ORIENTED_EDGE('',*,*,#89389,.F.); +#89389 = EDGE_CURVE('',#89390,#89340,#89392,.T.); +#89390 = VERTEX_POINT('',#89391); +#89391 = CARTESIAN_POINT('',(4.17,-3.17,1.25)); +#89392 = CIRCLE('',#89393,0.23); +#89393 = AXIS2_PLACEMENT_3D('',#89394,#89395,#89396); +#89394 = CARTESIAN_POINT('',(4.17,-3.4,1.25)); +#89395 = DIRECTION('',(1.,0.,0.)); +#89396 = DIRECTION('',(0.,0.,-1.)); +#89397 = ORIENTED_EDGE('',*,*,#89398,.F.); +#89398 = EDGE_CURVE('',#83348,#89390,#89399,.T.); +#89399 = CIRCLE('',#89400,3.E-02); +#89400 = AXIS2_PLACEMENT_3D('',#89401,#89402,#89403); +#89401 = CARTESIAN_POINT('',(4.2,-3.17,1.25)); +#89402 = DIRECTION('',(-0.,0.,-1.)); +#89403 = DIRECTION('',(-1.,0.,0.)); +#89404 = ORIENTED_EDGE('',*,*,#84499,.F.); +#89405 = TOROIDAL_SURFACE('',#89406,0.23,3.E-02); +#89406 = AXIS2_PLACEMENT_3D('',#89407,#89408,#89409); +#89407 = CARTESIAN_POINT('',(4.2,-3.4,1.25)); +#89408 = DIRECTION('',(1.,0.,0.)); +#89409 = DIRECTION('',(0.,0.,-1.)); +#89410 = ADVANCED_FACE('',(#89411),#89431,.T.); +#89411 = FACE_BOUND('',#89412,.T.); +#89412 = EDGE_LOOP('',(#89413,#89414,#89415,#89424)); +#89413 = ORIENTED_EDGE('',*,*,#89365,.T.); +#89414 = ORIENTED_EDGE('',*,*,#81850,.F.); +#89415 = ORIENTED_EDGE('',*,*,#89416,.F.); +#89416 = EDGE_CURVE('',#89417,#81843,#89419,.T.); +#89417 = VERTEX_POINT('',#89418); +#89418 = CARTESIAN_POINT('',(-4.17,-4.67,2.25)); +#89419 = CIRCLE('',#89420,3.E-02); +#89420 = AXIS2_PLACEMENT_3D('',#89421,#89422,#89423); +#89421 = CARTESIAN_POINT('',(-4.2,-4.67,2.25)); +#89422 = DIRECTION('',(0.,0.,-1.)); +#89423 = DIRECTION('',(-1.,0.,0.)); +#89424 = ORIENTED_EDGE('',*,*,#89425,.F.); +#89425 = EDGE_CURVE('',#89366,#89417,#89426,.T.); +#89426 = CIRCLE('',#89427,0.7); +#89427 = AXIS2_PLACEMENT_3D('',#89428,#89429,#89430); +#89428 = CARTESIAN_POINT('',(-3.47,-4.67,2.25)); +#89429 = DIRECTION('',(0.,-1.,0.)); +#89430 = DIRECTION('',(0.,0.,1.)); +#89431 = TOROIDAL_SURFACE('',#89432,0.73,3.E-02); +#89432 = AXIS2_PLACEMENT_3D('',#89433,#89434,#89435); +#89433 = CARTESIAN_POINT('',(-3.47,-4.67,2.25)); +#89434 = DIRECTION('',(0.,1.,0.)); +#89435 = DIRECTION('',(0.,-0.,1.)); +#89436 = ADVANCED_FACE('',(#89437),#89456,.T.); +#89437 = FACE_BOUND('',#89438,.T.); +#89438 = EDGE_LOOP('',(#89439,#89440,#89448,#89455)); +#89439 = ORIENTED_EDGE('',*,*,#89398,.T.); +#89440 = ORIENTED_EDGE('',*,*,#89441,.F.); +#89441 = EDGE_CURVE('',#89442,#89390,#89444,.T.); +#89442 = VERTEX_POINT('',#89443); +#89443 = CARTESIAN_POINT('',(4.17,-3.17,1.05)); +#89444 = LINE('',#89445,#89446); +#89445 = CARTESIAN_POINT('',(4.17,-3.17,0.)); +#89446 = VECTOR('',#89447,1.); +#89447 = DIRECTION('',(-0.,0.,1.)); +#89448 = ORIENTED_EDGE('',*,*,#89449,.F.); +#89449 = EDGE_CURVE('',#83356,#89442,#89450,.T.); +#89450 = CIRCLE('',#89451,3.E-02); +#89451 = AXIS2_PLACEMENT_3D('',#89452,#89453,#89454); +#89452 = CARTESIAN_POINT('',(4.2,-3.17,1.05)); +#89453 = DIRECTION('',(-0.,0.,-1.)); +#89454 = DIRECTION('',(-1.,0.,0.)); +#89455 = ORIENTED_EDGE('',*,*,#83355,.F.); +#89456 = CYLINDRICAL_SURFACE('',#89457,3.E-02); +#89457 = AXIS2_PLACEMENT_3D('',#89458,#89459,#89460); +#89458 = CARTESIAN_POINT('',(4.2,-3.17,0.)); +#89459 = DIRECTION('',(-0.,0.,1.)); +#89460 = DIRECTION('',(1.,0.,0.)); +#89461 = ADVANCED_FACE('',(#89462),#89480,.T.); +#89462 = FACE_BOUND('',#89463,.T.); +#89463 = EDGE_LOOP('',(#89464,#89465,#89466,#89473,#89474)); +#89464 = ORIENTED_EDGE('',*,*,#89416,.T.); +#89465 = ORIENTED_EDGE('',*,*,#81842,.F.); +#89466 = ORIENTED_EDGE('',*,*,#89467,.F.); +#89467 = EDGE_CURVE('',#81204,#81835,#89468,.T.); +#89468 = CIRCLE('',#89469,3.E-02); +#89469 = AXIS2_PLACEMENT_3D('',#89470,#89471,#89472); +#89470 = CARTESIAN_POINT('',(-4.2,-4.67,-0.45)); +#89471 = DIRECTION('',(0.,0.,-1.)); +#89472 = DIRECTION('',(-1.,0.,0.)); +#89473 = ORIENTED_EDGE('',*,*,#81203,.F.); +#89474 = ORIENTED_EDGE('',*,*,#89475,.F.); +#89475 = EDGE_CURVE('',#89417,#81196,#89476,.T.); +#89476 = LINE('',#89477,#89478); +#89477 = CARTESIAN_POINT('',(-4.17,-4.67,0.)); +#89478 = VECTOR('',#89479,1.); +#89479 = DIRECTION('',(0.,0.,-1.)); +#89480 = CYLINDRICAL_SURFACE('',#89481,3.E-02); +#89481 = AXIS2_PLACEMENT_3D('',#89482,#89483,#89484); +#89482 = CARTESIAN_POINT('',(-4.2,-4.67,0.)); +#89483 = DIRECTION('',(0.,0.,-1.)); +#89484 = DIRECTION('',(-1.,0.,0.)); +#89485 = ADVANCED_FACE('',(#89486),#89506,.T.); +#89486 = FACE_BOUND('',#89487,.T.); +#89487 = EDGE_LOOP('',(#89488,#89489,#89498,#89505)); +#89488 = ORIENTED_EDGE('',*,*,#89449,.T.); +#89489 = ORIENTED_EDGE('',*,*,#89490,.F.); +#89490 = EDGE_CURVE('',#89491,#89442,#89493,.T.); +#89491 = VERTEX_POINT('',#89492); +#89492 = CARTESIAN_POINT('',(3.47,-3.17,0.35)); +#89493 = CIRCLE('',#89494,0.7); +#89494 = AXIS2_PLACEMENT_3D('',#89495,#89496,#89497); +#89495 = CARTESIAN_POINT('',(3.47,-3.17,1.05)); +#89496 = DIRECTION('',(-0.,-1.,0.)); +#89497 = DIRECTION('',(-6.195440985631E-16,0.,1.)); +#89498 = ORIENTED_EDGE('',*,*,#89499,.F.); +#89499 = EDGE_CURVE('',#83364,#89491,#89500,.T.); +#89500 = CIRCLE('',#89501,3.E-02); +#89501 = AXIS2_PLACEMENT_3D('',#89502,#89503,#89504); +#89502 = CARTESIAN_POINT('',(3.47,-3.17,0.32)); +#89503 = DIRECTION('',(-1.,0.,1.445602896647E-14)); +#89504 = DIRECTION('',(1.445602896647E-14,0.,1.)); +#89505 = ORIENTED_EDGE('',*,*,#83363,.F.); +#89506 = TOROIDAL_SURFACE('',#89507,0.73,3.E-02); +#89507 = AXIS2_PLACEMENT_3D('',#89508,#89509,#89510); +#89508 = CARTESIAN_POINT('',(3.47,-3.17,1.05)); +#89509 = DIRECTION('',(0.,1.,-0.)); +#89510 = DIRECTION('',(0.,0.,1.)); +#89511 = ADVANCED_FACE('',(#89512),#89524,.T.); +#89512 = FACE_BOUND('',#89513,.T.); +#89513 = EDGE_LOOP('',(#89514,#89515,#89516,#89523)); +#89514 = ORIENTED_EDGE('',*,*,#89467,.T.); +#89515 = ORIENTED_EDGE('',*,*,#84260,.F.); +#89516 = ORIENTED_EDGE('',*,*,#89517,.F.); +#89517 = EDGE_CURVE('',#81212,#83970,#89518,.T.); +#89518 = CIRCLE('',#89519,3.E-02); +#89519 = AXIS2_PLACEMENT_3D('',#89520,#89521,#89522); +#89520 = CARTESIAN_POINT('',(-4.2,-4.3,-0.82)); +#89521 = DIRECTION('',(-0.,1.,0.)); +#89522 = DIRECTION('',(0.,0.,1.)); +#89523 = ORIENTED_EDGE('',*,*,#81211,.F.); +#89524 = TOROIDAL_SURFACE('',#89525,0.37,3.E-02); +#89525 = AXIS2_PLACEMENT_3D('',#89526,#89527,#89528); +#89526 = CARTESIAN_POINT('',(-4.2,-4.3,-0.45)); +#89527 = DIRECTION('',(-1.,0.,0.)); +#89528 = DIRECTION('',(0.,0.,1.)); +#89529 = ADVANCED_FACE('',(#89530),#89549,.T.); +#89530 = FACE_BOUND('',#89531,.T.); +#89531 = EDGE_LOOP('',(#89532,#89533,#89541,#89548)); +#89532 = ORIENTED_EDGE('',*,*,#89499,.T.); +#89533 = ORIENTED_EDGE('',*,*,#89534,.F.); +#89534 = EDGE_CURVE('',#89535,#89491,#89537,.T.); +#89535 = VERTEX_POINT('',#89536); +#89536 = CARTESIAN_POINT('',(-3.47,-3.17,0.35)); +#89537 = LINE('',#89538,#89539); +#89538 = CARTESIAN_POINT('',(0.,-3.17,0.35)); +#89539 = VECTOR('',#89540,1.); +#89540 = DIRECTION('',(1.,0.,0.)); +#89541 = ORIENTED_EDGE('',*,*,#89542,.F.); +#89542 = EDGE_CURVE('',#83373,#89535,#89543,.T.); +#89543 = CIRCLE('',#89544,3.E-02); +#89544 = AXIS2_PLACEMENT_3D('',#89545,#89546,#89547); +#89545 = CARTESIAN_POINT('',(-3.47,-3.17,0.32)); +#89546 = DIRECTION('',(-1.,0.,0.)); +#89547 = DIRECTION('',(0.,0.,1.)); +#89548 = ORIENTED_EDGE('',*,*,#83372,.F.); +#89549 = CYLINDRICAL_SURFACE('',#89550,3.E-02); +#89550 = AXIS2_PLACEMENT_3D('',#89551,#89552,#89553); +#89551 = CARTESIAN_POINT('',(0.,-3.17,0.32)); +#89552 = DIRECTION('',(1.,0.,0.)); +#89553 = DIRECTION('',(0.,0.,-1.)); +#89554 = ADVANCED_FACE('',(#89555),#89567,.T.); +#89555 = FACE_BOUND('',#89556,.T.); +#89556 = EDGE_LOOP('',(#89557,#89558,#89559,#89566)); +#89557 = ORIENTED_EDGE('',*,*,#89517,.T.); +#89558 = ORIENTED_EDGE('',*,*,#83995,.F.); +#89559 = ORIENTED_EDGE('',*,*,#89560,.F.); +#89560 = EDGE_CURVE('',#81221,#83988,#89561,.T.); +#89561 = CIRCLE('',#89562,3.E-02); +#89562 = AXIS2_PLACEMENT_3D('',#89563,#89564,#89565); +#89563 = CARTESIAN_POINT('',(-4.2,-4.05,-0.82)); +#89564 = DIRECTION('',(-0.,1.,0.)); +#89565 = DIRECTION('',(0.,0.,1.)); +#89566 = ORIENTED_EDGE('',*,*,#81220,.F.); +#89567 = CYLINDRICAL_SURFACE('',#89568,3.E-02); +#89568 = AXIS2_PLACEMENT_3D('',#89569,#89570,#89571); +#89569 = CARTESIAN_POINT('',(-4.2,0.,-0.82)); +#89570 = DIRECTION('',(0.,-1.,0.)); +#89571 = DIRECTION('',(0.,0.,-1.)); +#89572 = ADVANCED_FACE('',(#89573),#89593,.T.); +#89573 = FACE_BOUND('',#89574,.T.); +#89574 = EDGE_LOOP('',(#89575,#89576,#89585,#89592)); +#89575 = ORIENTED_EDGE('',*,*,#89542,.T.); +#89576 = ORIENTED_EDGE('',*,*,#89577,.F.); +#89577 = EDGE_CURVE('',#89578,#89535,#89580,.T.); +#89578 = VERTEX_POINT('',#89579); +#89579 = CARTESIAN_POINT('',(-4.17,-3.17,1.05)); +#89580 = CIRCLE('',#89581,0.7); +#89581 = AXIS2_PLACEMENT_3D('',#89582,#89583,#89584); +#89582 = CARTESIAN_POINT('',(-3.47,-3.17,1.05)); +#89583 = DIRECTION('',(0.,-1.,0.)); +#89584 = DIRECTION('',(0.,0.,1.)); +#89585 = ORIENTED_EDGE('',*,*,#89586,.F.); +#89586 = EDGE_CURVE('',#83381,#89578,#89587,.T.); +#89587 = CIRCLE('',#89588,3.E-02); +#89588 = AXIS2_PLACEMENT_3D('',#89589,#89590,#89591); +#89589 = CARTESIAN_POINT('',(-4.2,-3.17,1.05)); +#89590 = DIRECTION('',(7.228014483237E-15,0.,1.)); +#89591 = DIRECTION('',(1.,0.,-7.228014483237E-15)); +#89592 = ORIENTED_EDGE('',*,*,#83380,.F.); +#89593 = TOROIDAL_SURFACE('',#89594,0.73,3.E-02); +#89594 = AXIS2_PLACEMENT_3D('',#89595,#89596,#89597); +#89595 = CARTESIAN_POINT('',(-3.47,-3.17,1.05)); +#89596 = DIRECTION('',(0.,1.,-0.)); +#89597 = DIRECTION('',(0.,0.,1.)); +#89598 = ADVANCED_FACE('',(#89599),#89611,.T.); +#89599 = FACE_BOUND('',#89600,.T.); +#89600 = EDGE_LOOP('',(#89601,#89602,#89603,#89610)); +#89601 = ORIENTED_EDGE('',*,*,#89560,.T.); +#89602 = ORIENTED_EDGE('',*,*,#84284,.F.); +#89603 = ORIENTED_EDGE('',*,*,#89604,.F.); +#89604 = EDGE_CURVE('',#81186,#83930,#89605,.T.); +#89605 = CIRCLE('',#89606,3.E-02); +#89606 = AXIS2_PLACEMENT_3D('',#89607,#89608,#89609); +#89607 = CARTESIAN_POINT('',(-4.2,-3.68,-0.45)); +#89608 = DIRECTION('',(0.,0.,1.)); +#89609 = DIRECTION('',(1.,0.,-0.)); +#89610 = ORIENTED_EDGE('',*,*,#81228,.F.); +#89611 = TOROIDAL_SURFACE('',#89612,0.37,3.E-02); +#89612 = AXIS2_PLACEMENT_3D('',#89613,#89614,#89615); +#89613 = CARTESIAN_POINT('',(-4.2,-4.05,-0.45)); +#89614 = DIRECTION('',(-1.,0.,0.)); +#89615 = DIRECTION('',(0.,0.,1.)); +#89616 = ADVANCED_FACE('',(#89617),#89636,.T.); +#89617 = FACE_BOUND('',#89618,.T.); +#89618 = EDGE_LOOP('',(#89619,#89620,#89628,#89635)); +#89619 = ORIENTED_EDGE('',*,*,#89586,.T.); +#89620 = ORIENTED_EDGE('',*,*,#89621,.F.); +#89621 = EDGE_CURVE('',#89622,#89578,#89624,.T.); +#89622 = VERTEX_POINT('',#89623); +#89623 = CARTESIAN_POINT('',(-4.17,-3.17,1.25)); +#89624 = LINE('',#89625,#89626); +#89625 = CARTESIAN_POINT('',(-4.17,-3.17,0.)); +#89626 = VECTOR('',#89627,1.); +#89627 = DIRECTION('',(0.,0.,-1.)); +#89628 = ORIENTED_EDGE('',*,*,#89629,.F.); +#89629 = EDGE_CURVE('',#83390,#89622,#89630,.T.); +#89630 = CIRCLE('',#89631,3.E-02); +#89631 = AXIS2_PLACEMENT_3D('',#89632,#89633,#89634); +#89632 = CARTESIAN_POINT('',(-4.2,-3.17,1.25)); +#89633 = DIRECTION('',(-0.,0.,1.)); +#89634 = DIRECTION('',(1.,0.,0.)); +#89635 = ORIENTED_EDGE('',*,*,#83389,.F.); +#89636 = CYLINDRICAL_SURFACE('',#89637,3.E-02); +#89637 = AXIS2_PLACEMENT_3D('',#89638,#89639,#89640); +#89638 = CARTESIAN_POINT('',(-4.2,-3.17,0.)); +#89639 = DIRECTION('',(0.,0.,-1.)); +#89640 = DIRECTION('',(-1.,0.,0.)); +#89641 = ADVANCED_FACE('',(#89642),#89662,.T.); +#89642 = FACE_BOUND('',#89643,.T.); +#89643 = EDGE_LOOP('',(#89644,#89645,#89646,#89655,#89661)); +#89644 = ORIENTED_EDGE('',*,*,#89604,.T.); +#89645 = ORIENTED_EDGE('',*,*,#83955,.F.); +#89646 = ORIENTED_EDGE('',*,*,#89647,.F.); +#89647 = EDGE_CURVE('',#89648,#83948,#89650,.T.); +#89648 = VERTEX_POINT('',#89649); +#89649 = CARTESIAN_POINT('',(-4.17,-3.68,1.25)); +#89650 = CIRCLE('',#89651,3.E-02); +#89651 = AXIS2_PLACEMENT_3D('',#89652,#89653,#89654); +#89652 = CARTESIAN_POINT('',(-4.2,-3.68,1.25)); +#89653 = DIRECTION('',(0.,0.,1.)); +#89654 = DIRECTION('',(1.,0.,-0.)); +#89655 = ORIENTED_EDGE('',*,*,#89656,.T.); +#89656 = EDGE_CURVE('',#89648,#81188,#89657,.T.); +#89657 = LINE('',#89658,#89659); +#89658 = CARTESIAN_POINT('',(-4.17,-3.68,0.)); +#89659 = VECTOR('',#89660,1.); +#89660 = DIRECTION('',(-0.,-0.,-1.)); +#89661 = ORIENTED_EDGE('',*,*,#81185,.F.); +#89662 = CYLINDRICAL_SURFACE('',#89663,3.E-02); +#89663 = AXIS2_PLACEMENT_3D('',#89664,#89665,#89666); +#89664 = CARTESIAN_POINT('',(-4.2,-3.68,0.)); +#89665 = DIRECTION('',(0.,0.,1.)); +#89666 = DIRECTION('',(1.,0.,-0.)); +#89667 = ADVANCED_FACE('',(#89668),#89688,.T.); +#89668 = FACE_BOUND('',#89669,.T.); +#89669 = EDGE_LOOP('',(#89670,#89671,#89680,#89687)); +#89670 = ORIENTED_EDGE('',*,*,#89629,.T.); +#89671 = ORIENTED_EDGE('',*,*,#89672,.F.); +#89672 = EDGE_CURVE('',#89673,#89622,#89675,.T.); +#89673 = VERTEX_POINT('',#89674); +#89674 = CARTESIAN_POINT('',(-4.17,-3.4,1.48)); +#89675 = CIRCLE('',#89676,0.23); +#89676 = AXIS2_PLACEMENT_3D('',#89677,#89678,#89679); +#89677 = CARTESIAN_POINT('',(-4.17,-3.4,1.25)); +#89678 = DIRECTION('',(-1.,0.,0.)); +#89679 = DIRECTION('',(0.,0.,1.)); +#89680 = ORIENTED_EDGE('',*,*,#89681,.F.); +#89681 = EDGE_CURVE('',#81892,#89673,#89682,.T.); +#89682 = CIRCLE('',#89683,3.E-02); +#89683 = AXIS2_PLACEMENT_3D('',#89684,#89685,#89686); +#89684 = CARTESIAN_POINT('',(-4.2,-3.4,1.48)); +#89685 = DIRECTION('',(0.,-1.,0.)); +#89686 = DIRECTION('',(0.,0.,-1.)); +#89687 = ORIENTED_EDGE('',*,*,#84523,.F.); +#89688 = TOROIDAL_SURFACE('',#89689,0.23,3.E-02); +#89689 = AXIS2_PLACEMENT_3D('',#89690,#89691,#89692); +#89690 = CARTESIAN_POINT('',(-4.2,-3.4,1.25)); +#89691 = DIRECTION('',(-1.,0.,0.)); +#89692 = DIRECTION('',(0.,0.,1.)); +#89693 = ADVANCED_FACE('',(#89694),#89714,.T.); +#89694 = FACE_BOUND('',#89695,.T.); +#89695 = EDGE_LOOP('',(#89696,#89697,#89698,#89707)); +#89696 = ORIENTED_EDGE('',*,*,#89647,.T.); +#89697 = ORIENTED_EDGE('',*,*,#84547,.F.); +#89698 = ORIENTED_EDGE('',*,*,#89699,.F.); +#89699 = EDGE_CURVE('',#89700,#81874,#89702,.T.); +#89700 = VERTEX_POINT('',#89701); +#89701 = CARTESIAN_POINT('',(-4.17,-3.45,1.48)); +#89702 = CIRCLE('',#89703,3.E-02); +#89703 = AXIS2_PLACEMENT_3D('',#89704,#89705,#89706); +#89704 = CARTESIAN_POINT('',(-4.2,-3.45,1.48)); +#89705 = DIRECTION('',(-0.,1.,0.)); +#89706 = DIRECTION('',(0.,0.,1.)); +#89707 = ORIENTED_EDGE('',*,*,#89708,.F.); +#89708 = EDGE_CURVE('',#89648,#89700,#89709,.T.); +#89709 = CIRCLE('',#89710,0.23); +#89710 = AXIS2_PLACEMENT_3D('',#89711,#89712,#89713); +#89711 = CARTESIAN_POINT('',(-4.17,-3.45,1.25)); +#89712 = DIRECTION('',(-1.,0.,0.)); +#89713 = DIRECTION('',(0.,0.,1.)); +#89714 = TOROIDAL_SURFACE('',#89715,0.23,3.E-02); +#89715 = AXIS2_PLACEMENT_3D('',#89716,#89717,#89718); +#89716 = CARTESIAN_POINT('',(-4.2,-3.45,1.25)); +#89717 = DIRECTION('',(-1.,0.,0.)); +#89718 = DIRECTION('',(0.,0.,1.)); +#89719 = ADVANCED_FACE('',(#89720),#89731,.T.); +#89720 = FACE_BOUND('',#89721,.T.); +#89721 = EDGE_LOOP('',(#89722,#89723,#89729,#89730)); +#89722 = ORIENTED_EDGE('',*,*,#89681,.T.); +#89723 = ORIENTED_EDGE('',*,*,#89724,.F.); +#89724 = EDGE_CURVE('',#89700,#89673,#89725,.T.); +#89725 = LINE('',#89726,#89727); +#89726 = CARTESIAN_POINT('',(-4.17,-3.4,1.48)); +#89727 = VECTOR('',#89728,1.); +#89728 = DIRECTION('',(-0.,1.,-0.)); +#89729 = ORIENTED_EDGE('',*,*,#89699,.T.); +#89730 = ORIENTED_EDGE('',*,*,#81899,.F.); +#89731 = CYLINDRICAL_SURFACE('',#89732,3.E-02); +#89732 = AXIS2_PLACEMENT_3D('',#89733,#89734,#89735); +#89733 = CARTESIAN_POINT('',(-4.2,0.,1.48)); +#89734 = DIRECTION('',(0.,1.,0.)); +#89735 = DIRECTION('',(0.,-0.,1.)); +#89736 = ADVANCED_FACE('',(#89737),#89755,.T.); +#89737 = FACE_BOUND('',#89738,.T.); +#89738 = EDGE_LOOP('',(#89739,#89746,#89747,#89754)); +#89739 = ORIENTED_EDGE('',*,*,#89740,.F.); +#89740 = EDGE_CURVE('',#82187,#79775,#89741,.T.); +#89741 = CIRCLE('',#89742,3.E-02); +#89742 = AXIS2_PLACEMENT_3D('',#89743,#89744,#89745); +#89743 = CARTESIAN_POINT('',(-3.47,2.57,8.E-02)); +#89744 = DIRECTION('',(-1.,0.,0.)); +#89745 = DIRECTION('',(0.,0.,1.)); +#89746 = ORIENTED_EDGE('',*,*,#82186,.F.); +#89747 = ORIENTED_EDGE('',*,*,#89748,.F.); +#89748 = EDGE_CURVE('',#79783,#82178,#89749,.T.); +#89749 = CIRCLE('',#89750,3.E-02); +#89750 = AXIS2_PLACEMENT_3D('',#89751,#89752,#89753); +#89751 = CARTESIAN_POINT('',(3.47,2.57,8.E-02)); +#89752 = DIRECTION('',(1.,-0.,0.)); +#89753 = DIRECTION('',(0.,0.,-1.)); +#89754 = ORIENTED_EDGE('',*,*,#79782,.F.); +#89755 = CYLINDRICAL_SURFACE('',#89756,3.E-02); +#89756 = AXIS2_PLACEMENT_3D('',#89757,#89758,#89759); +#89757 = CARTESIAN_POINT('',(-4.47,2.57,8.E-02)); +#89758 = DIRECTION('',(1.,0.,0.)); +#89759 = DIRECTION('',(0.,0.,-1.)); +#89760 = ADVANCED_FACE('',(#89761),#89773,.T.); +#89761 = FACE_BOUND('',#89762,.T.); +#89762 = EDGE_LOOP('',(#89763,#89764,#89765,#89772)); +#89763 = ORIENTED_EDGE('',*,*,#89748,.T.); +#89764 = ORIENTED_EDGE('',*,*,#82177,.F.); +#89765 = ORIENTED_EDGE('',*,*,#89766,.F.); +#89766 = EDGE_CURVE('',#82109,#82170,#89767,.T.); +#89767 = CIRCLE('',#89768,3.E-02); +#89768 = AXIS2_PLACEMENT_3D('',#89769,#89770,#89771); +#89769 = CARTESIAN_POINT('',(4.44,2.57,1.05)); +#89770 = DIRECTION('',(-7.228014483237E-15,0.,1.)); +#89771 = DIRECTION('',(1.,0.,7.228014483237E-15)); +#89772 = ORIENTED_EDGE('',*,*,#82126,.F.); +#89773 = TOROIDAL_SURFACE('',#89774,0.97,3.E-02); +#89774 = AXIS2_PLACEMENT_3D('',#89775,#89776,#89777); +#89775 = CARTESIAN_POINT('',(3.47,2.57,1.05)); +#89776 = DIRECTION('',(0.,-1.,0.)); +#89777 = DIRECTION('',(0.,0.,-1.)); +#89778 = ADVANCED_FACE('',(#89779),#89791,.T.); +#89779 = FACE_BOUND('',#89780,.T.); +#89780 = EDGE_LOOP('',(#89781,#89782,#89783,#89790)); +#89781 = ORIENTED_EDGE('',*,*,#89740,.T.); +#89782 = ORIENTED_EDGE('',*,*,#82942,.F.); +#89783 = ORIENTED_EDGE('',*,*,#89784,.F.); +#89784 = EDGE_CURVE('',#82195,#82793,#89785,.T.); +#89785 = CIRCLE('',#89786,3.E-02); +#89786 = AXIS2_PLACEMENT_3D('',#89787,#89788,#89789); +#89787 = CARTESIAN_POINT('',(-4.44,2.57,1.05)); +#89788 = DIRECTION('',(0.,-0.,1.)); +#89789 = DIRECTION('',(1.,0.,0.)); +#89790 = ORIENTED_EDGE('',*,*,#82194,.F.); +#89791 = TOROIDAL_SURFACE('',#89792,0.97,3.E-02); +#89792 = AXIS2_PLACEMENT_3D('',#89793,#89794,#89795); +#89793 = CARTESIAN_POINT('',(-3.47,2.57,1.05)); +#89794 = DIRECTION('',(0.,-1.,0.)); +#89795 = DIRECTION('',(0.,0.,-1.)); +#89796 = ADVANCED_FACE('',(#89797),#89809,.T.); +#89797 = FACE_BOUND('',#89798,.T.); +#89798 = EDGE_LOOP('',(#89799,#89800,#89801,#89808)); +#89799 = ORIENTED_EDGE('',*,*,#89766,.T.); +#89800 = ORIENTED_EDGE('',*,*,#82169,.F.); +#89801 = ORIENTED_EDGE('',*,*,#89802,.F.); +#89802 = EDGE_CURVE('',#82610,#82161,#89803,.T.); +#89803 = CIRCLE('',#89804,3.E-02); +#89804 = AXIS2_PLACEMENT_3D('',#89805,#89806,#89807); +#89805 = CARTESIAN_POINT('',(4.44,2.57,2.25)); +#89806 = DIRECTION('',(0.,0.,1.)); +#89807 = DIRECTION('',(1.,0.,-0.)); +#89808 = ORIENTED_EDGE('',*,*,#82609,.F.); +#89809 = CYLINDRICAL_SURFACE('',#89810,3.E-02); +#89810 = AXIS2_PLACEMENT_3D('',#89811,#89812,#89813); +#89811 = CARTESIAN_POINT('',(4.44,2.57,3.25)); +#89812 = DIRECTION('',(0.,0.,-1.)); +#89813 = DIRECTION('',(-1.,0.,0.)); +#89814 = ADVANCED_FACE('',(#89815),#89827,.T.); +#89815 = FACE_BOUND('',#89816,.T.); +#89816 = EDGE_LOOP('',(#89817,#89818,#89819,#89826)); +#89817 = ORIENTED_EDGE('',*,*,#89784,.T.); +#89818 = ORIENTED_EDGE('',*,*,#82792,.F.); +#89819 = ORIENTED_EDGE('',*,*,#89820,.F.); +#89820 = EDGE_CURVE('',#82142,#82785,#89821,.T.); +#89821 = CIRCLE('',#89822,3.E-02); +#89822 = AXIS2_PLACEMENT_3D('',#89823,#89824,#89825); +#89823 = CARTESIAN_POINT('',(-4.44,2.57,2.25)); +#89824 = DIRECTION('',(0.,-0.,1.)); +#89825 = DIRECTION('',(1.,0.,0.)); +#89826 = ORIENTED_EDGE('',*,*,#82203,.F.); +#89827 = CYLINDRICAL_SURFACE('',#89828,3.E-02); +#89828 = AXIS2_PLACEMENT_3D('',#89829,#89830,#89831); +#89829 = CARTESIAN_POINT('',(-4.44,2.57,3.25)); +#89830 = DIRECTION('',(0.,0.,-1.)); +#89831 = DIRECTION('',(-1.,0.,0.)); +#89832 = ADVANCED_FACE('',(#89833),#89845,.T.); +#89833 = FACE_BOUND('',#89834,.T.); +#89834 = EDGE_LOOP('',(#89835,#89836,#89837,#89844)); +#89835 = ORIENTED_EDGE('',*,*,#89802,.T.); +#89836 = ORIENTED_EDGE('',*,*,#82160,.F.); +#89837 = ORIENTED_EDGE('',*,*,#89838,.F.); +#89838 = EDGE_CURVE('',#82307,#82153,#89839,.T.); +#89839 = CIRCLE('',#89840,3.E-02); +#89840 = AXIS2_PLACEMENT_3D('',#89841,#89842,#89843); +#89841 = CARTESIAN_POINT('',(3.47,2.57,3.22)); +#89842 = DIRECTION('',(-1.,0.,0.)); +#89843 = DIRECTION('',(0.,0.,1.)); +#89844 = ORIENTED_EDGE('',*,*,#83094,.F.); +#89845 = TOROIDAL_SURFACE('',#89846,0.97,3.E-02); +#89846 = AXIS2_PLACEMENT_3D('',#89847,#89848,#89849); +#89847 = CARTESIAN_POINT('',(3.47,2.57,2.25)); +#89848 = DIRECTION('',(0.,-1.,0.)); +#89849 = DIRECTION('',(0.,0.,-1.)); +#89850 = ADVANCED_FACE('',(#89851),#89863,.T.); +#89851 = FACE_BOUND('',#89852,.T.); +#89852 = EDGE_LOOP('',(#89853,#89854,#89855,#89862)); +#89853 = ORIENTED_EDGE('',*,*,#89820,.T.); +#89854 = ORIENTED_EDGE('',*,*,#82926,.F.); +#89855 = ORIENTED_EDGE('',*,*,#89856,.F.); +#89856 = EDGE_CURVE('',#82144,#82315,#89857,.T.); +#89857 = CIRCLE('',#89858,3.E-02); +#89858 = AXIS2_PLACEMENT_3D('',#89859,#89860,#89861); +#89859 = CARTESIAN_POINT('',(-3.47,2.57,3.22)); +#89860 = DIRECTION('',(1.,0.,0.)); +#89861 = DIRECTION('',(0.,0.,-1.)); +#89862 = ORIENTED_EDGE('',*,*,#82141,.F.); +#89863 = TOROIDAL_SURFACE('',#89864,0.97,3.E-02); +#89864 = AXIS2_PLACEMENT_3D('',#89865,#89866,#89867); +#89865 = CARTESIAN_POINT('',(-3.47,2.57,2.25)); +#89866 = DIRECTION('',(0.,-1.,0.)); +#89867 = DIRECTION('',(0.,0.,-1.)); +#89868 = ADVANCED_FACE('',(#89869),#89875,.T.); +#89869 = FACE_BOUND('',#89870,.T.); +#89870 = EDGE_LOOP('',(#89871,#89872,#89873,#89874)); +#89871 = ORIENTED_EDGE('',*,*,#89838,.T.); +#89872 = ORIENTED_EDGE('',*,*,#82152,.F.); +#89873 = ORIENTED_EDGE('',*,*,#89856,.T.); +#89874 = ORIENTED_EDGE('',*,*,#82314,.F.); +#89875 = CYLINDRICAL_SURFACE('',#89876,3.E-02); +#89876 = AXIS2_PLACEMENT_3D('',#89877,#89878,#89879); +#89877 = CARTESIAN_POINT('',(0.,2.57,3.22)); +#89878 = DIRECTION('',(-1.,0.,0.)); +#89879 = DIRECTION('',(0.,0.,1.)); +#89880 = ADVANCED_FACE('',(#89881),#89899,.T.); +#89881 = FACE_BOUND('',#89882,.T.); +#89882 = EDGE_LOOP('',(#89883,#89890,#89891,#89898)); +#89883 = ORIENTED_EDGE('',*,*,#89884,.F.); +#89884 = EDGE_CURVE('',#81470,#82248,#89885,.T.); +#89885 = CIRCLE('',#89886,3.E-02); +#89886 = AXIS2_PLACEMENT_3D('',#89887,#89888,#89889); +#89887 = CARTESIAN_POINT('',(4.2,2.57,1.05)); +#89888 = DIRECTION('',(0.,0.,-1.)); +#89889 = DIRECTION('',(-1.,0.,0.)); +#89890 = ORIENTED_EDGE('',*,*,#81469,.F.); +#89891 = ORIENTED_EDGE('',*,*,#89892,.F.); +#89892 = EDGE_CURVE('',#82257,#81462,#89893,.T.); +#89893 = CIRCLE('',#89894,3.E-02); +#89894 = AXIS2_PLACEMENT_3D('',#89895,#89896,#89897); +#89895 = CARTESIAN_POINT('',(4.2,2.57,2.25)); +#89896 = DIRECTION('',(1.445602896647E-14,-0.,1.)); +#89897 = DIRECTION('',(1.,0.,-1.445602896647E-14)); +#89898 = ORIENTED_EDGE('',*,*,#82256,.F.); +#89899 = CYLINDRICAL_SURFACE('',#89900,3.E-02); +#89900 = AXIS2_PLACEMENT_3D('',#89901,#89902,#89903); +#89901 = CARTESIAN_POINT('',(4.2,2.57,3.25)); +#89902 = DIRECTION('',(-0.,0.,1.)); +#89903 = DIRECTION('',(1.,0.,0.)); +#89904 = ADVANCED_FACE('',(#89905),#89917,.T.); +#89905 = FACE_BOUND('',#89906,.T.); +#89906 = EDGE_LOOP('',(#89907,#89908,#89909,#89916)); +#89907 = ORIENTED_EDGE('',*,*,#89892,.T.); +#89908 = ORIENTED_EDGE('',*,*,#83013,.F.); +#89909 = ORIENTED_EDGE('',*,*,#89910,.F.); +#89910 = EDGE_CURVE('',#82265,#81430,#89911,.T.); +#89911 = CIRCLE('',#89912,3.E-02); +#89912 = AXIS2_PLACEMENT_3D('',#89913,#89914,#89915); +#89913 = CARTESIAN_POINT('',(3.47,2.57,2.98)); +#89914 = DIRECTION('',(-1.,0.,0.)); +#89915 = DIRECTION('',(0.,0.,1.)); +#89916 = ORIENTED_EDGE('',*,*,#82264,.F.); +#89917 = TOROIDAL_SURFACE('',#89918,0.73,3.E-02); +#89918 = AXIS2_PLACEMENT_3D('',#89919,#89920,#89921); +#89919 = CARTESIAN_POINT('',(3.47,2.57,2.25)); +#89920 = DIRECTION('',(0.,-1.,0.)); +#89921 = DIRECTION('',(0.,0.,-1.)); +#89922 = ADVANCED_FACE('',(#89923),#89935,.T.); +#89923 = FACE_BOUND('',#89924,.T.); +#89924 = EDGE_LOOP('',(#89925,#89926,#89927,#89934)); +#89925 = ORIENTED_EDGE('',*,*,#89884,.T.); +#89926 = ORIENTED_EDGE('',*,*,#82247,.F.); +#89927 = ORIENTED_EDGE('',*,*,#89928,.F.); +#89928 = EDGE_CURVE('',#81680,#82240,#89929,.T.); +#89929 = CIRCLE('',#89930,3.E-02); +#89930 = AXIS2_PLACEMENT_3D('',#89931,#89932,#89933); +#89931 = CARTESIAN_POINT('',(3.47,2.57,0.32)); +#89932 = DIRECTION('',(-1.,-5.224419336988E-29,1.445602896647E-14)); +#89933 = DIRECTION('',(1.445602896647E-14,-1.290965526626E-57,1.)); +#89934 = ORIENTED_EDGE('',*,*,#82084,.F.); +#89935 = TOROIDAL_SURFACE('',#89936,0.73,3.E-02); +#89936 = AXIS2_PLACEMENT_3D('',#89937,#89938,#89939); +#89937 = CARTESIAN_POINT('',(3.47,2.57,1.05)); +#89938 = DIRECTION('',(0.,-1.,0.)); +#89939 = DIRECTION('',(0.,0.,-1.)); +#89940 = ADVANCED_FACE('',(#89941),#89953,.T.); +#89941 = FACE_BOUND('',#89942,.T.); +#89942 = EDGE_LOOP('',(#89943,#89944,#89945,#89952)); +#89943 = ORIENTED_EDGE('',*,*,#89910,.T.); +#89944 = ORIENTED_EDGE('',*,*,#81429,.F.); +#89945 = ORIENTED_EDGE('',*,*,#89946,.F.); +#89946 = EDGE_CURVE('',#82212,#81422,#89947,.T.); +#89947 = CIRCLE('',#89948,3.E-02); +#89948 = AXIS2_PLACEMENT_3D('',#89949,#89950,#89951); +#89949 = CARTESIAN_POINT('',(-3.47,2.57,2.98)); +#89950 = DIRECTION('',(-1.,0.,1.445602896647E-14)); +#89951 = DIRECTION('',(1.445602896647E-14,0.,1.)); +#89952 = ORIENTED_EDGE('',*,*,#82273,.F.); +#89953 = CYLINDRICAL_SURFACE('',#89954,3.E-02); +#89954 = AXIS2_PLACEMENT_3D('',#89955,#89956,#89957); +#89955 = CARTESIAN_POINT('',(-4.47,2.57,2.98)); +#89956 = DIRECTION('',(-1.,0.,0.)); +#89957 = DIRECTION('',(0.,0.,1.)); +#89958 = ADVANCED_FACE('',(#89959),#89971,.T.); +#89959 = FACE_BOUND('',#89960,.T.); +#89960 = EDGE_LOOP('',(#89961,#89962,#89963,#89970)); +#89961 = ORIENTED_EDGE('',*,*,#89928,.T.); +#89962 = ORIENTED_EDGE('',*,*,#82239,.F.); +#89963 = ORIENTED_EDGE('',*,*,#89964,.F.); +#89964 = EDGE_CURVE('',#81688,#82231,#89965,.T.); +#89965 = CIRCLE('',#89966,3.E-02); +#89966 = AXIS2_PLACEMENT_3D('',#89967,#89968,#89969); +#89967 = CARTESIAN_POINT('',(-3.47,2.57,0.32)); +#89968 = DIRECTION('',(-1.,0.,0.)); +#89969 = DIRECTION('',(0.,0.,1.)); +#89970 = ORIENTED_EDGE('',*,*,#81687,.F.); +#89971 = CYLINDRICAL_SURFACE('',#89972,3.E-02); +#89972 = AXIS2_PLACEMENT_3D('',#89973,#89974,#89975); +#89973 = CARTESIAN_POINT('',(-4.47,2.57,0.32)); +#89974 = DIRECTION('',(1.,0.,0.)); +#89975 = DIRECTION('',(0.,0.,-1.)); +#89976 = ADVANCED_FACE('',(#89977),#89989,.T.); +#89977 = FACE_BOUND('',#89978,.T.); +#89978 = EDGE_LOOP('',(#89979,#89980,#89981,#89988)); +#89979 = ORIENTED_EDGE('',*,*,#89946,.T.); +#89980 = ORIENTED_EDGE('',*,*,#82989,.F.); +#89981 = ORIENTED_EDGE('',*,*,#89982,.F.); +#89982 = EDGE_CURVE('',#82214,#81390,#89983,.T.); +#89983 = CIRCLE('',#89984,3.E-02); +#89984 = AXIS2_PLACEMENT_3D('',#89985,#89986,#89987); +#89985 = CARTESIAN_POINT('',(-4.2,2.57,2.25)); +#89986 = DIRECTION('',(0.,0.,-1.)); +#89987 = DIRECTION('',(-1.,0.,0.)); +#89988 = ORIENTED_EDGE('',*,*,#82211,.F.); +#89989 = TOROIDAL_SURFACE('',#89990,0.73,3.E-02); +#89990 = AXIS2_PLACEMENT_3D('',#89991,#89992,#89993); +#89991 = CARTESIAN_POINT('',(-3.47,2.57,2.25)); +#89992 = DIRECTION('',(0.,-1.,0.)); +#89993 = DIRECTION('',(0.,0.,-1.)); +#89994 = ADVANCED_FACE('',(#89995),#90007,.T.); +#89995 = FACE_BOUND('',#89996,.T.); +#89996 = EDGE_LOOP('',(#89997,#89998,#89999,#90006)); +#89997 = ORIENTED_EDGE('',*,*,#89964,.T.); +#89998 = ORIENTED_EDGE('',*,*,#82230,.F.); +#89999 = ORIENTED_EDGE('',*,*,#90000,.F.); +#90000 = EDGE_CURVE('',#81382,#82223,#90001,.T.); +#90001 = CIRCLE('',#90002,3.E-02); +#90002 = AXIS2_PLACEMENT_3D('',#90003,#90004,#90005); +#90003 = CARTESIAN_POINT('',(-4.2,2.57,1.05)); +#90004 = DIRECTION('',(7.228014483237E-15,7.228014483237E-15,1.)); +#90005 = DIRECTION('',(1.,0.,-7.228014483237E-15)); +#90006 = ORIENTED_EDGE('',*,*,#82965,.F.); +#90007 = TOROIDAL_SURFACE('',#90008,0.73,3.E-02); +#90008 = AXIS2_PLACEMENT_3D('',#90009,#90010,#90011); +#90009 = CARTESIAN_POINT('',(-3.47,2.57,1.05)); +#90010 = DIRECTION('',(0.,-1.,0.)); +#90011 = DIRECTION('',(0.,0.,-1.)); +#90012 = ADVANCED_FACE('',(#90013),#90019,.T.); +#90013 = FACE_BOUND('',#90014,.T.); +#90014 = EDGE_LOOP('',(#90015,#90016,#90017,#90018)); +#90015 = ORIENTED_EDGE('',*,*,#89982,.T.); +#90016 = ORIENTED_EDGE('',*,*,#81389,.F.); +#90017 = ORIENTED_EDGE('',*,*,#90000,.T.); +#90018 = ORIENTED_EDGE('',*,*,#82222,.F.); +#90019 = CYLINDRICAL_SURFACE('',#90020,3.E-02); +#90020 = AXIS2_PLACEMENT_3D('',#90021,#90022,#90023); +#90021 = CARTESIAN_POINT('',(-4.2,2.57,3.25)); +#90022 = DIRECTION('',(0.,0.,-1.)); +#90023 = DIRECTION('',(-1.,0.,0.)); +#90024 = ADVANCED_FACE('',(#90025),#90063,.T.); +#90025 = FACE_BOUND('',#90026,.T.); +#90026 = EDGE_LOOP('',(#90027,#90028,#90029,#90030,#90031,#90032,#90033, + #90034,#90042,#90050,#90056,#90057)); +#90027 = ORIENTED_EDGE('',*,*,#89088,.F.); +#90028 = ORIENTED_EDGE('',*,*,#89133,.T.); +#90029 = ORIENTED_EDGE('',*,*,#89177,.T.); +#90030 = ORIENTED_EDGE('',*,*,#89220,.T.); +#90031 = ORIENTED_EDGE('',*,*,#89272,.T.); +#90032 = ORIENTED_EDGE('',*,*,#89323,.T.); +#90033 = ORIENTED_EDGE('',*,*,#89374,.T.); +#90034 = ORIENTED_EDGE('',*,*,#90035,.F.); +#90035 = EDGE_CURVE('',#90036,#89366,#90038,.T.); +#90036 = VERTEX_POINT('',#90037); +#90037 = CARTESIAN_POINT('',(-3.47,-4.7,2.95)); +#90038 = LINE('',#90039,#90040); +#90039 = CARTESIAN_POINT('',(-3.47,-13.4358800358,2.95)); +#90040 = VECTOR('',#90041,1.); +#90041 = DIRECTION('',(-0.,1.,-0.)); +#90042 = ORIENTED_EDGE('',*,*,#90043,.T.); +#90043 = EDGE_CURVE('',#90036,#90044,#90046,.T.); +#90044 = VERTEX_POINT('',#90045); +#90045 = CARTESIAN_POINT('',(-3.1,-4.7,2.95)); +#90046 = LINE('',#90047,#90048); +#90047 = CARTESIAN_POINT('',(-3.47,-4.7,2.95)); +#90048 = VECTOR('',#90049,1.); +#90049 = DIRECTION('',(1.,0.,-3.516331370223E-15)); +#90050 = ORIENTED_EDGE('',*,*,#90051,.T.); +#90051 = EDGE_CURVE('',#90044,#81108,#90052,.T.); +#90052 = LINE('',#90053,#90054); +#90053 = CARTESIAN_POINT('',(-3.1,-13.4358800358,2.95)); +#90054 = VECTOR('',#90055,1.); +#90055 = DIRECTION('',(-0.,1.,-0.)); +#90056 = ORIENTED_EDGE('',*,*,#81131,.T.); +#90057 = ORIENTED_EDGE('',*,*,#90058,.F.); +#90058 = EDGE_CURVE('',#81026,#81124,#90059,.T.); +#90059 = LINE('',#90060,#90061); +#90060 = CARTESIAN_POINT('',(-1.15,-13.4358800358,2.95)); +#90061 = VECTOR('',#90062,1.); +#90062 = DIRECTION('',(-0.,1.,-0.)); +#90063 = PLANE('',#90064); +#90064 = AXIS2_PLACEMENT_3D('',#90065,#90066,#90067); +#90065 = CARTESIAN_POINT('',(-3.47,-3.85,2.95)); +#90066 = DIRECTION('',(0.,0.,1.)); +#90067 = DIRECTION('',(1.,0.,-0.)); +#90068 = ADVANCED_FACE('',(#90069),#90107,.T.); +#90069 = FACE_BOUND('',#90070,.T.); +#90070 = EDGE_LOOP('',(#90071,#90072,#90078,#90079,#90087,#90095,#90101, + #90102,#90103,#90104,#90105,#90106)); +#90071 = ORIENTED_EDGE('',*,*,#88695,.T.); +#90072 = ORIENTED_EDGE('',*,*,#90073,.T.); +#90073 = EDGE_CURVE('',#81067,#81148,#90074,.T.); +#90074 = LINE('',#90075,#90076); +#90075 = CARTESIAN_POINT('',(1.15,-13.4358800358,2.95)); +#90076 = VECTOR('',#90077,1.); +#90077 = DIRECTION('',(-0.,1.,-0.)); +#90078 = ORIENTED_EDGE('',*,*,#81171,.T.); +#90079 = ORIENTED_EDGE('',*,*,#90080,.F.); +#90080 = EDGE_CURVE('',#90081,#81164,#90083,.T.); +#90081 = VERTEX_POINT('',#90082); +#90082 = CARTESIAN_POINT('',(3.1,-4.7,2.95)); +#90083 = LINE('',#90084,#90085); +#90084 = CARTESIAN_POINT('',(3.1,-13.4358800358,2.95)); +#90085 = VECTOR('',#90086,1.); +#90086 = DIRECTION('',(-0.,1.,-0.)); +#90087 = ORIENTED_EDGE('',*,*,#90088,.T.); +#90088 = EDGE_CURVE('',#90081,#90089,#90091,.T.); +#90089 = VERTEX_POINT('',#90090); +#90090 = CARTESIAN_POINT('',(3.47,-4.7,2.95)); +#90091 = LINE('',#90092,#90093); +#90092 = CARTESIAN_POINT('',(3.47,-4.7,2.95)); +#90093 = VECTOR('',#90094,1.); +#90094 = DIRECTION('',(1.,-0.,1.172110456741E-15)); +#90095 = ORIENTED_EDGE('',*,*,#90096,.T.); +#90096 = EDGE_CURVE('',#90089,#88960,#90097,.T.); +#90097 = LINE('',#90098,#90099); +#90098 = CARTESIAN_POINT('',(3.47,-13.4358800358,2.95)); +#90099 = VECTOR('',#90100,1.); +#90100 = DIRECTION('',(-0.,1.,-0.)); +#90101 = ORIENTED_EDGE('',*,*,#88959,.T.); +#90102 = ORIENTED_EDGE('',*,*,#88915,.T.); +#90103 = ORIENTED_EDGE('',*,*,#88871,.T.); +#90104 = ORIENTED_EDGE('',*,*,#88827,.T.); +#90105 = ORIENTED_EDGE('',*,*,#88783,.T.); +#90106 = ORIENTED_EDGE('',*,*,#88739,.T.); +#90107 = PLANE('',#90108); +#90108 = AXIS2_PLACEMENT_3D('',#90109,#90110,#90111); +#90109 = CARTESIAN_POINT('',(-3.47,-3.85,2.95)); +#90110 = DIRECTION('',(0.,0.,1.)); +#90111 = DIRECTION('',(1.,0.,-0.)); +#90112 = ADVANCED_FACE('',(#90113),#90142,.T.); +#90113 = FACE_BOUND('',#90114,.T.); +#90114 = EDGE_LOOP('',(#90115,#90116,#90124,#90132,#90138,#90139,#90140, + #90141)); +#90115 = ORIENTED_EDGE('',*,*,#89621,.T.); +#90116 = ORIENTED_EDGE('',*,*,#90117,.F.); +#90117 = EDGE_CURVE('',#90118,#89578,#90120,.T.); +#90118 = VERTEX_POINT('',#90119); +#90119 = CARTESIAN_POINT('',(-4.17,-3.22,1.05)); +#90120 = LINE('',#90121,#90122); +#90121 = CARTESIAN_POINT('',(-4.17,-3.85,1.05)); +#90122 = VECTOR('',#90123,1.); +#90123 = DIRECTION('',(0.,1.,0.)); +#90124 = ORIENTED_EDGE('',*,*,#90125,.T.); +#90125 = EDGE_CURVE('',#90118,#90126,#90128,.T.); +#90126 = VERTEX_POINT('',#90127); +#90127 = CARTESIAN_POINT('',(-4.17,-3.22,0.75)); +#90128 = LINE('',#90129,#90130); +#90129 = CARTESIAN_POINT('',(-4.17,-3.22,1.05)); +#90130 = VECTOR('',#90131,1.); +#90131 = DIRECTION('',(0.,0.,-1.)); +#90132 = ORIENTED_EDGE('',*,*,#90133,.T.); +#90133 = EDGE_CURVE('',#90126,#81188,#90134,.T.); +#90134 = LINE('',#90135,#90136); +#90135 = CARTESIAN_POINT('',(-4.17,5.199738091155,0.75)); +#90136 = VECTOR('',#90137,1.); +#90137 = DIRECTION('',(0.,-1.,0.)); +#90138 = ORIENTED_EDGE('',*,*,#89656,.F.); +#90139 = ORIENTED_EDGE('',*,*,#89708,.T.); +#90140 = ORIENTED_EDGE('',*,*,#89724,.T.); +#90141 = ORIENTED_EDGE('',*,*,#89672,.T.); +#90142 = PLANE('',#90143); +#90143 = AXIS2_PLACEMENT_3D('',#90144,#90145,#90146); +#90144 = CARTESIAN_POINT('',(-4.17,-3.85,1.05)); +#90145 = DIRECTION('',(-1.,0.,0.)); +#90146 = DIRECTION('',(0.,0.,1.)); +#90147 = ADVANCED_FACE('',(#90148),#90167,.T.); +#90148 = FACE_BOUND('',#90149,.T.); +#90149 = EDGE_LOOP('',(#90150,#90159,#90160,#90161)); +#90150 = ORIENTED_EDGE('',*,*,#90151,.T.); +#90151 = EDGE_CURVE('',#90152,#90118,#90154,.T.); +#90152 = VERTEX_POINT('',#90153); +#90153 = CARTESIAN_POINT('',(-3.47,-3.22,0.35)); +#90154 = CIRCLE('',#90155,0.7); +#90155 = AXIS2_PLACEMENT_3D('',#90156,#90157,#90158); +#90156 = CARTESIAN_POINT('',(-3.47,-3.22,1.05)); +#90157 = DIRECTION('',(0.,1.,-0.)); +#90158 = DIRECTION('',(0.,0.,1.)); +#90159 = ORIENTED_EDGE('',*,*,#90117,.T.); +#90160 = ORIENTED_EDGE('',*,*,#89577,.T.); +#90161 = ORIENTED_EDGE('',*,*,#90162,.F.); +#90162 = EDGE_CURVE('',#90152,#89535,#90163,.T.); +#90163 = LINE('',#90164,#90165); +#90164 = CARTESIAN_POINT('',(-3.47,-3.85,0.35)); +#90165 = VECTOR('',#90166,1.); +#90166 = DIRECTION('',(0.,1.,0.)); +#90167 = CYLINDRICAL_SURFACE('',#90168,0.7); +#90168 = AXIS2_PLACEMENT_3D('',#90169,#90170,#90171); +#90169 = CARTESIAN_POINT('',(-3.47,-3.85,1.05)); +#90170 = DIRECTION('',(0.,1.,0.)); +#90171 = DIRECTION('',(0.,-0.,1.)); +#90172 = ADVANCED_FACE('',(#90173),#90191,.T.); +#90173 = FACE_BOUND('',#90174,.T.); +#90174 = EDGE_LOOP('',(#90175,#90183,#90184,#90185)); +#90175 = ORIENTED_EDGE('',*,*,#90176,.T.); +#90176 = EDGE_CURVE('',#90177,#90152,#90179,.T.); +#90177 = VERTEX_POINT('',#90178); +#90178 = CARTESIAN_POINT('',(3.47,-3.22,0.35)); +#90179 = LINE('',#90180,#90181); +#90180 = CARTESIAN_POINT('',(3.47,-3.22,0.35)); +#90181 = VECTOR('',#90182,1.); +#90182 = DIRECTION('',(-1.,0.,1.562250968999E-17)); +#90183 = ORIENTED_EDGE('',*,*,#90162,.T.); +#90184 = ORIENTED_EDGE('',*,*,#89534,.T.); +#90185 = ORIENTED_EDGE('',*,*,#90186,.F.); +#90186 = EDGE_CURVE('',#90177,#89491,#90187,.T.); +#90187 = LINE('',#90188,#90189); +#90188 = CARTESIAN_POINT('',(3.47,-3.85,0.35)); +#90189 = VECTOR('',#90190,1.); +#90190 = DIRECTION('',(0.,1.,0.)); +#90191 = PLANE('',#90192); +#90192 = AXIS2_PLACEMENT_3D('',#90193,#90194,#90195); +#90193 = CARTESIAN_POINT('',(3.47,-3.85,0.35)); +#90194 = DIRECTION('',(0.,0.,-1.)); +#90195 = DIRECTION('',(-1.,0.,-0.)); +#90196 = ADVANCED_FACE('',(#90197),#90216,.T.); +#90197 = FACE_BOUND('',#90198,.T.); +#90198 = EDGE_LOOP('',(#90199,#90208,#90209,#90210)); +#90199 = ORIENTED_EDGE('',*,*,#90200,.T.); +#90200 = EDGE_CURVE('',#90201,#90177,#90203,.T.); +#90201 = VERTEX_POINT('',#90202); +#90202 = CARTESIAN_POINT('',(4.17,-3.22,1.05)); +#90203 = CIRCLE('',#90204,0.7); +#90204 = AXIS2_PLACEMENT_3D('',#90205,#90206,#90207); +#90205 = CARTESIAN_POINT('',(3.47,-3.22,1.05)); +#90206 = DIRECTION('',(0.,1.,-0.)); +#90207 = DIRECTION('',(0.,0.,1.)); +#90208 = ORIENTED_EDGE('',*,*,#90186,.T.); +#90209 = ORIENTED_EDGE('',*,*,#89490,.T.); +#90210 = ORIENTED_EDGE('',*,*,#90211,.F.); +#90211 = EDGE_CURVE('',#90201,#89442,#90212,.T.); +#90212 = LINE('',#90213,#90214); +#90213 = CARTESIAN_POINT('',(4.17,-3.85,1.05)); +#90214 = VECTOR('',#90215,1.); +#90215 = DIRECTION('',(0.,1.,0.)); +#90216 = CYLINDRICAL_SURFACE('',#90217,0.7); +#90217 = AXIS2_PLACEMENT_3D('',#90218,#90219,#90220); +#90218 = CARTESIAN_POINT('',(3.47,-3.85,1.05)); +#90219 = DIRECTION('',(0.,1.,0.)); +#90220 = DIRECTION('',(0.,-0.,1.)); +#90221 = ADVANCED_FACE('',(#90222),#90244,.T.); +#90222 = FACE_BOUND('',#90223,.T.); +#90223 = EDGE_LOOP('',(#90224,#90225,#90226,#90234,#90240,#90241,#90242, + #90243)); +#90224 = ORIENTED_EDGE('',*,*,#89287,.T.); +#90225 = ORIENTED_EDGE('',*,*,#89237,.T.); +#90226 = ORIENTED_EDGE('',*,*,#90227,.F.); +#90227 = EDGE_CURVE('',#90228,#80966,#90230,.T.); +#90228 = VERTEX_POINT('',#90229); +#90229 = CARTESIAN_POINT('',(4.17,-3.22,0.75)); +#90230 = LINE('',#90231,#90232); +#90231 = CARTESIAN_POINT('',(4.17,5.199738091155,0.75)); +#90232 = VECTOR('',#90233,1.); +#90233 = DIRECTION('',(0.,-1.,0.)); +#90234 = ORIENTED_EDGE('',*,*,#90235,.T.); +#90235 = EDGE_CURVE('',#90228,#90201,#90236,.T.); +#90236 = LINE('',#90237,#90238); +#90237 = CARTESIAN_POINT('',(4.17,-3.22,1.05)); +#90238 = VECTOR('',#90239,1.); +#90239 = DIRECTION('',(-0.,0.,1.)); +#90240 = ORIENTED_EDGE('',*,*,#90211,.T.); +#90241 = ORIENTED_EDGE('',*,*,#89441,.T.); +#90242 = ORIENTED_EDGE('',*,*,#89389,.T.); +#90243 = ORIENTED_EDGE('',*,*,#89339,.T.); +#90244 = PLANE('',#90245); +#90245 = AXIS2_PLACEMENT_3D('',#90246,#90247,#90248); +#90246 = CARTESIAN_POINT('',(4.17,-3.85,2.25)); +#90247 = DIRECTION('',(1.,-0.,0.)); +#90248 = DIRECTION('',(0.,0.,-1.)); +#90249 = ADVANCED_FACE('',(#90250,#90277),#90347,.T.); +#90250 = FACE_BOUND('',#90251,.T.); +#90251 = EDGE_LOOP('',(#90252,#90261,#90269,#90276)); +#90252 = ORIENTED_EDGE('',*,*,#90253,.F.); +#90253 = EDGE_CURVE('',#90254,#80384,#90256,.T.); +#90254 = VERTEX_POINT('',#90255); +#90255 = CARTESIAN_POINT('',(-3.,-1.4,1.35)); +#90256 = CIRCLE('',#90257,0.3); +#90257 = AXIS2_PLACEMENT_3D('',#90258,#90259,#90260); +#90258 = CARTESIAN_POINT('',(-3.,-1.4,1.65)); +#90259 = DIRECTION('',(0.,1.,0.)); +#90260 = DIRECTION('',(0.,-0.,1.)); +#90261 = ORIENTED_EDGE('',*,*,#90262,.F.); +#90262 = EDGE_CURVE('',#90263,#90254,#90265,.T.); +#90263 = VERTEX_POINT('',#90264); +#90264 = CARTESIAN_POINT('',(3.,-1.4,1.35)); +#90265 = LINE('',#90266,#90267); +#90266 = CARTESIAN_POINT('',(-3.,-1.4,1.35)); +#90267 = VECTOR('',#90268,1.); +#90268 = DIRECTION('',(-1.,-0.,-0.)); +#90269 = ORIENTED_EDGE('',*,*,#90270,.F.); +#90270 = EDGE_CURVE('',#80368,#90263,#90271,.T.); +#90271 = CIRCLE('',#90272,0.3); +#90272 = AXIS2_PLACEMENT_3D('',#90273,#90274,#90275); +#90273 = CARTESIAN_POINT('',(3.,-1.4,1.65)); +#90274 = DIRECTION('',(0.,1.,0.)); +#90275 = DIRECTION('',(0.,-0.,1.)); +#90276 = ORIENTED_EDGE('',*,*,#80391,.F.); +#90277 = FACE_BOUND('',#90278,.T.); +#90278 = EDGE_LOOP('',(#90279,#90290,#90298,#90307,#90315,#90324,#90332, + #90341)); +#90279 = ORIENTED_EDGE('',*,*,#90280,.T.); +#90280 = EDGE_CURVE('',#90281,#90283,#90285,.T.); +#90281 = VERTEX_POINT('',#90282); +#90282 = CARTESIAN_POINT('',(3.47,-1.4,2.9)); +#90283 = VERTEX_POINT('',#90284); +#90284 = CARTESIAN_POINT('',(4.12,-1.4,2.25)); +#90285 = CIRCLE('',#90286,0.65); +#90286 = AXIS2_PLACEMENT_3D('',#90287,#90288,#90289); +#90287 = CARTESIAN_POINT('',(3.47,-1.4,2.25)); +#90288 = DIRECTION('',(0.,1.,0.)); +#90289 = DIRECTION('',(0.,-0.,1.)); +#90290 = ORIENTED_EDGE('',*,*,#90291,.T.); +#90291 = EDGE_CURVE('',#90283,#90292,#90294,.T.); +#90292 = VERTEX_POINT('',#90293); +#90293 = CARTESIAN_POINT('',(4.12,-1.4,1.05)); +#90294 = LINE('',#90295,#90296); +#90295 = CARTESIAN_POINT('',(4.12,-1.4,2.25)); +#90296 = VECTOR('',#90297,1.); +#90297 = DIRECTION('',(0.,0.,-1.)); +#90298 = ORIENTED_EDGE('',*,*,#90299,.T.); +#90299 = EDGE_CURVE('',#90292,#90300,#90302,.T.); +#90300 = VERTEX_POINT('',#90301); +#90301 = CARTESIAN_POINT('',(3.47,-1.4,0.4)); +#90302 = CIRCLE('',#90303,0.65); +#90303 = AXIS2_PLACEMENT_3D('',#90304,#90305,#90306); +#90304 = CARTESIAN_POINT('',(3.47,-1.4,1.05)); +#90305 = DIRECTION('',(0.,1.,0.)); +#90306 = DIRECTION('',(0.,-0.,1.)); +#90307 = ORIENTED_EDGE('',*,*,#90308,.T.); +#90308 = EDGE_CURVE('',#90300,#90309,#90311,.T.); +#90309 = VERTEX_POINT('',#90310); +#90310 = CARTESIAN_POINT('',(-3.47,-1.4,0.4)); +#90311 = LINE('',#90312,#90313); +#90312 = CARTESIAN_POINT('',(-3.47,-1.4,0.4)); +#90313 = VECTOR('',#90314,1.); +#90314 = DIRECTION('',(-1.,0.,0.)); +#90315 = ORIENTED_EDGE('',*,*,#90316,.T.); +#90316 = EDGE_CURVE('',#90309,#90317,#90319,.T.); +#90317 = VERTEX_POINT('',#90318); +#90318 = CARTESIAN_POINT('',(-4.12,-1.4,1.05)); +#90319 = CIRCLE('',#90320,0.65); +#90320 = AXIS2_PLACEMENT_3D('',#90321,#90322,#90323); +#90321 = CARTESIAN_POINT('',(-3.47,-1.4,1.05)); +#90322 = DIRECTION('',(0.,1.,0.)); +#90323 = DIRECTION('',(0.,-0.,1.)); +#90324 = ORIENTED_EDGE('',*,*,#90325,.T.); +#90325 = EDGE_CURVE('',#90317,#90326,#90328,.T.); +#90326 = VERTEX_POINT('',#90327); +#90327 = CARTESIAN_POINT('',(-4.12,-1.4,2.25)); +#90328 = LINE('',#90329,#90330); +#90329 = CARTESIAN_POINT('',(-4.12,-1.4,2.25)); +#90330 = VECTOR('',#90331,1.); +#90331 = DIRECTION('',(0.,-0.,1.)); +#90332 = ORIENTED_EDGE('',*,*,#90333,.T.); +#90333 = EDGE_CURVE('',#90326,#90334,#90336,.T.); +#90334 = VERTEX_POINT('',#90335); +#90335 = CARTESIAN_POINT('',(-3.47,-1.4,2.9)); +#90336 = CIRCLE('',#90337,0.65); +#90337 = AXIS2_PLACEMENT_3D('',#90338,#90339,#90340); +#90338 = CARTESIAN_POINT('',(-3.47,-1.4,2.25)); +#90339 = DIRECTION('',(0.,1.,0.)); +#90340 = DIRECTION('',(0.,-0.,1.)); +#90341 = ORIENTED_EDGE('',*,*,#90342,.T.); +#90342 = EDGE_CURVE('',#90334,#90281,#90343,.T.); +#90343 = LINE('',#90344,#90345); +#90344 = CARTESIAN_POINT('',(-3.47,-1.4,2.9)); +#90345 = VECTOR('',#90346,1.); +#90346 = DIRECTION('',(1.,0.,0.)); +#90347 = PLANE('',#90348); +#90348 = AXIS2_PLACEMENT_3D('',#90349,#90350,#90351); +#90349 = CARTESIAN_POINT('',(-3.47,-1.4,2.25)); +#90350 = DIRECTION('',(0.,1.,0.)); +#90351 = DIRECTION('',(0.,-0.,1.)); +#90352 = ADVANCED_FACE('',(#90353),#90371,.T.); +#90353 = FACE_BOUND('',#90354,.T.); +#90354 = EDGE_LOOP('',(#90355,#90362,#90363,#90370)); +#90355 = ORIENTED_EDGE('',*,*,#90356,.F.); +#90356 = EDGE_CURVE('',#81246,#90317,#90357,.T.); +#90357 = CIRCLE('',#90358,5.E-02); +#90358 = AXIS2_PLACEMENT_3D('',#90359,#90360,#90361); +#90359 = CARTESIAN_POINT('',(-4.12,-1.45,1.05)); +#90360 = DIRECTION('',(0.,0.,-1.)); +#90361 = DIRECTION('',(-1.,0.,0.)); +#90362 = ORIENTED_EDGE('',*,*,#81243,.F.); +#90363 = ORIENTED_EDGE('',*,*,#90364,.F.); +#90364 = EDGE_CURVE('',#90326,#81244,#90365,.T.); +#90365 = CIRCLE('',#90366,5.E-02); +#90366 = AXIS2_PLACEMENT_3D('',#90367,#90368,#90369); +#90367 = CARTESIAN_POINT('',(-4.12,-1.45,2.25)); +#90368 = DIRECTION('',(-8.673617379884E-15,0.,1.)); +#90369 = DIRECTION('',(1.,0.,8.673617379884E-15)); +#90370 = ORIENTED_EDGE('',*,*,#90325,.F.); +#90371 = CYLINDRICAL_SURFACE('',#90372,5.E-02); +#90372 = AXIS2_PLACEMENT_3D('',#90373,#90374,#90375); +#90373 = CARTESIAN_POINT('',(-4.12,-1.45,2.25)); +#90374 = DIRECTION('',(0.,-0.,1.)); +#90375 = DIRECTION('',(1.,0.,0.)); +#90376 = ADVANCED_FACE('',(#90377),#90389,.T.); +#90377 = FACE_BOUND('',#90378,.T.); +#90378 = EDGE_LOOP('',(#90379,#90380,#90381,#90388)); +#90379 = ORIENTED_EDGE('',*,*,#90364,.T.); +#90380 = ORIENTED_EDGE('',*,*,#82997,.F.); +#90381 = ORIENTED_EDGE('',*,*,#90382,.F.); +#90382 = EDGE_CURVE('',#90334,#81414,#90383,.T.); +#90383 = CIRCLE('',#90384,5.E-02); +#90384 = AXIS2_PLACEMENT_3D('',#90385,#90386,#90387); +#90385 = CARTESIAN_POINT('',(-3.47,-1.45,2.9)); +#90386 = DIRECTION('',(1.,0.,0.)); +#90387 = DIRECTION('',(0.,-0.,-1.)); +#90388 = ORIENTED_EDGE('',*,*,#90333,.F.); +#90389 = TOROIDAL_SURFACE('',#90390,0.65,5.E-02); +#90390 = AXIS2_PLACEMENT_3D('',#90391,#90392,#90393); +#90391 = CARTESIAN_POINT('',(-3.47,-1.45,2.25)); +#90392 = DIRECTION('',(0.,1.,0.)); +#90393 = DIRECTION('',(0.,-0.,1.)); +#90394 = ADVANCED_FACE('',(#90395),#90407,.T.); +#90395 = FACE_BOUND('',#90396,.T.); +#90396 = EDGE_LOOP('',(#90397,#90398,#90399,#90406)); +#90397 = ORIENTED_EDGE('',*,*,#90356,.T.); +#90398 = ORIENTED_EDGE('',*,*,#90316,.F.); +#90399 = ORIENTED_EDGE('',*,*,#90400,.F.); +#90400 = EDGE_CURVE('',#81620,#90309,#90401,.T.); +#90401 = CIRCLE('',#90402,5.E-02); +#90402 = AXIS2_PLACEMENT_3D('',#90403,#90404,#90405); +#90403 = CARTESIAN_POINT('',(-3.47,-1.45,0.4)); +#90404 = DIRECTION('',(1.,-0.,8.673617379884E-15)); +#90405 = DIRECTION('',(8.673617379884E-15,0.,-1.)); +#90406 = ORIENTED_EDGE('',*,*,#81995,.F.); +#90407 = TOROIDAL_SURFACE('',#90408,0.65,5.E-02); +#90408 = AXIS2_PLACEMENT_3D('',#90409,#90410,#90411); +#90409 = CARTESIAN_POINT('',(-3.47,-1.45,1.05)); +#90410 = DIRECTION('',(0.,1.,0.)); +#90411 = DIRECTION('',(0.,-0.,1.)); +#90412 = ADVANCED_FACE('',(#90413),#90425,.T.); +#90413 = FACE_BOUND('',#90414,.T.); +#90414 = EDGE_LOOP('',(#90415,#90416,#90417,#90424)); +#90415 = ORIENTED_EDGE('',*,*,#90382,.T.); +#90416 = ORIENTED_EDGE('',*,*,#81411,.F.); +#90417 = ORIENTED_EDGE('',*,*,#90418,.F.); +#90418 = EDGE_CURVE('',#90281,#81412,#90419,.T.); +#90419 = CIRCLE('',#90420,5.E-02); +#90420 = AXIS2_PLACEMENT_3D('',#90421,#90422,#90423); +#90421 = CARTESIAN_POINT('',(3.47,-1.45,2.9)); +#90422 = DIRECTION('',(1.,-0.,8.673617379884E-15)); +#90423 = DIRECTION('',(8.673617379884E-15,0.,-1.)); +#90424 = ORIENTED_EDGE('',*,*,#90342,.F.); +#90425 = CYLINDRICAL_SURFACE('',#90426,5.E-02); +#90426 = AXIS2_PLACEMENT_3D('',#90427,#90428,#90429); +#90427 = CARTESIAN_POINT('',(-3.47,-1.45,2.9)); +#90428 = DIRECTION('',(1.,0.,0.)); +#90429 = DIRECTION('',(0.,0.,-1.)); +#90430 = ADVANCED_FACE('',(#90431),#90443,.T.); +#90431 = FACE_BOUND('',#90432,.T.); +#90432 = EDGE_LOOP('',(#90433,#90434,#90435,#90442)); +#90433 = ORIENTED_EDGE('',*,*,#90400,.T.); +#90434 = ORIENTED_EDGE('',*,*,#90308,.F.); +#90435 = ORIENTED_EDGE('',*,*,#90436,.F.); +#90436 = EDGE_CURVE('',#81622,#90300,#90437,.T.); +#90437 = CIRCLE('',#90438,5.E-02); +#90438 = AXIS2_PLACEMENT_3D('',#90439,#90440,#90441); +#90439 = CARTESIAN_POINT('',(3.47,-1.45,0.4)); +#90440 = DIRECTION('',(1.,0.,0.)); +#90441 = DIRECTION('',(0.,0.,-1.)); +#90442 = ORIENTED_EDGE('',*,*,#81619,.F.); +#90443 = CYLINDRICAL_SURFACE('',#90444,5.E-02); +#90444 = AXIS2_PLACEMENT_3D('',#90445,#90446,#90447); +#90445 = CARTESIAN_POINT('',(-3.47,-1.45,0.4)); +#90446 = DIRECTION('',(-1.,0.,0.)); +#90447 = DIRECTION('',(0.,0.,1.)); +#90448 = ADVANCED_FACE('',(#90449),#90461,.T.); +#90449 = FACE_BOUND('',#90450,.T.); +#90450 = EDGE_LOOP('',(#90451,#90452,#90453,#90460)); +#90451 = ORIENTED_EDGE('',*,*,#90418,.T.); +#90452 = ORIENTED_EDGE('',*,*,#83021,.F.); +#90453 = ORIENTED_EDGE('',*,*,#90454,.F.); +#90454 = EDGE_CURVE('',#90283,#81454,#90455,.T.); +#90455 = CIRCLE('',#90456,5.E-02); +#90456 = AXIS2_PLACEMENT_3D('',#90457,#90458,#90459); +#90457 = CARTESIAN_POINT('',(4.12,-1.45,2.25)); +#90458 = DIRECTION('',(0.,0.,-1.)); +#90459 = DIRECTION('',(-1.,0.,0.)); +#90460 = ORIENTED_EDGE('',*,*,#90280,.F.); +#90461 = TOROIDAL_SURFACE('',#90462,0.65,5.E-02); +#90462 = AXIS2_PLACEMENT_3D('',#90463,#90464,#90465); +#90463 = CARTESIAN_POINT('',(3.47,-1.45,2.25)); +#90464 = DIRECTION('',(0.,1.,0.)); +#90465 = DIRECTION('',(0.,-0.,1.)); +#90466 = ADVANCED_FACE('',(#90467),#90479,.T.); +#90467 = FACE_BOUND('',#90468,.T.); +#90468 = EDGE_LOOP('',(#90469,#90470,#90471,#90478)); +#90469 = ORIENTED_EDGE('',*,*,#90436,.T.); +#90470 = ORIENTED_EDGE('',*,*,#90299,.F.); +#90471 = ORIENTED_EDGE('',*,*,#90472,.F.); +#90472 = EDGE_CURVE('',#81452,#90292,#90473,.T.); +#90473 = CIRCLE('',#90474,5.E-02); +#90474 = AXIS2_PLACEMENT_3D('',#90475,#90476,#90477); +#90475 = CARTESIAN_POINT('',(4.12,-1.45,1.05)); +#90476 = DIRECTION('',(-8.673617379884E-15,-8.673617379884E-15,1.)); +#90477 = DIRECTION('',(1.,0.,8.673617379884E-15)); +#90478 = ORIENTED_EDGE('',*,*,#83045,.F.); +#90479 = TOROIDAL_SURFACE('',#90480,0.65,5.E-02); +#90480 = AXIS2_PLACEMENT_3D('',#90481,#90482,#90483); +#90481 = CARTESIAN_POINT('',(3.47,-1.45,1.05)); +#90482 = DIRECTION('',(0.,1.,0.)); +#90483 = DIRECTION('',(0.,-0.,1.)); +#90484 = ADVANCED_FACE('',(#90485),#90491,.T.); +#90485 = FACE_BOUND('',#90486,.T.); +#90486 = EDGE_LOOP('',(#90487,#90488,#90489,#90490)); +#90487 = ORIENTED_EDGE('',*,*,#90454,.T.); +#90488 = ORIENTED_EDGE('',*,*,#81451,.F.); +#90489 = ORIENTED_EDGE('',*,*,#90472,.T.); +#90490 = ORIENTED_EDGE('',*,*,#90291,.F.); +#90491 = CYLINDRICAL_SURFACE('',#90492,5.E-02); +#90492 = AXIS2_PLACEMENT_3D('',#90493,#90494,#90495); +#90493 = CARTESIAN_POINT('',(4.12,-1.45,2.25)); +#90494 = DIRECTION('',(0.,0.,-1.)); +#90495 = DIRECTION('',(-1.,0.,0.)); +#90496 = ADVANCED_FACE('',(#90497,#90531,#90565,#90599,#90633,#90667, + #90701,#90735,#90769),#90794,.F.); +#90497 = FACE_BOUND('',#90498,.T.); +#90498 = EDGE_LOOP('',(#90499,#90509,#90517,#90525)); +#90499 = ORIENTED_EDGE('',*,*,#90500,.T.); +#90500 = EDGE_CURVE('',#90501,#90503,#90505,.T.); +#90501 = VERTEX_POINT('',#90502); +#90502 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.35)); +#90503 = VERTEX_POINT('',#90504); +#90504 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.35)); +#90505 = LINE('',#90506,#90507); +#90506 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90507 = VECTOR('',#90508,1.); +#90508 = DIRECTION('',(1.,-1.807003620809E-16,0.)); +#90509 = ORIENTED_EDGE('',*,*,#90510,.T.); +#90510 = EDGE_CURVE('',#90503,#90511,#90513,.T.); +#90511 = VERTEX_POINT('',#90512); +#90512 = CARTESIAN_POINT('',(2.8,1.852187257439,1.35)); +#90513 = LINE('',#90514,#90515); +#90514 = CARTESIAN_POINT('',(2.8,9.227216610312,1.35)); +#90515 = VECTOR('',#90516,1.); +#90516 = DIRECTION('',(-5.20417042793E-16,1.,0.)); +#90517 = ORIENTED_EDGE('',*,*,#90518,.T.); +#90518 = EDGE_CURVE('',#90511,#90519,#90521,.T.); +#90519 = VERTEX_POINT('',#90520); +#90520 = CARTESIAN_POINT('',(2.2,1.852187257439,1.35)); +#90521 = LINE('',#90522,#90523); +#90522 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90523 = VECTOR('',#90524,1.); +#90524 = DIRECTION('',(-1.,-3.614007241618E-16,0.)); +#90525 = ORIENTED_EDGE('',*,*,#90526,.T.); +#90526 = EDGE_CURVE('',#90519,#90501,#90527,.T.); +#90527 = LINE('',#90528,#90529); +#90528 = CARTESIAN_POINT('',(2.2,9.227216610312,1.35)); +#90529 = VECTOR('',#90530,1.); +#90530 = DIRECTION('',(0.,-1.,0.)); +#90531 = FACE_BOUND('',#90532,.T.); +#90532 = EDGE_LOOP('',(#90533,#90543,#90551,#90559)); +#90533 = ORIENTED_EDGE('',*,*,#90534,.T.); +#90534 = EDGE_CURVE('',#90535,#90537,#90539,.T.); +#90535 = VERTEX_POINT('',#90536); +#90536 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.35)); +#90537 = VERTEX_POINT('',#90538); +#90538 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.35)); +#90539 = LINE('',#90540,#90541); +#90540 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90541 = VECTOR('',#90542,1.); +#90542 = DIRECTION('',(1.,0.,-0.)); +#90543 = ORIENTED_EDGE('',*,*,#90544,.T.); +#90544 = EDGE_CURVE('',#90537,#90545,#90547,.T.); +#90545 = VERTEX_POINT('',#90546); +#90546 = CARTESIAN_POINT('',(0.375,1.852187257439,1.35)); +#90547 = LINE('',#90548,#90549); +#90548 = CARTESIAN_POINT('',(0.375,9.227216610312,1.35)); +#90549 = VECTOR('',#90550,1.); +#90550 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#90551 = ORIENTED_EDGE('',*,*,#90552,.T.); +#90552 = EDGE_CURVE('',#90545,#90553,#90555,.T.); +#90553 = VERTEX_POINT('',#90554); +#90554 = CARTESIAN_POINT('',(0.125,1.852187257439,1.35)); +#90555 = LINE('',#90556,#90557); +#90556 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90557 = VECTOR('',#90558,1.); +#90558 = DIRECTION('',(-1.,-8.673617379884E-16,0.)); +#90559 = ORIENTED_EDGE('',*,*,#90560,.T.); +#90560 = EDGE_CURVE('',#90553,#90535,#90561,.T.); +#90561 = LINE('',#90562,#90563); +#90562 = CARTESIAN_POINT('',(0.125,9.227216610312,1.35)); +#90563 = VECTOR('',#90564,1.); +#90564 = DIRECTION('',(2.385244779468E-16,-1.,0.)); +#90565 = FACE_BOUND('',#90566,.T.); +#90566 = EDGE_LOOP('',(#90567,#90577,#90585,#90593)); +#90567 = ORIENTED_EDGE('',*,*,#90568,.T.); +#90568 = EDGE_CURVE('',#90569,#90571,#90573,.T.); +#90569 = VERTEX_POINT('',#90570); +#90570 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.35)); +#90571 = VERTEX_POINT('',#90572); +#90572 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.35)); +#90573 = LINE('',#90574,#90575); +#90574 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90575 = VECTOR('',#90576,1.); +#90576 = DIRECTION('',(1.,0.,-0.)); +#90577 = ORIENTED_EDGE('',*,*,#90578,.T.); +#90578 = EDGE_CURVE('',#90571,#90579,#90581,.T.); +#90579 = VERTEX_POINT('',#90580); +#90580 = CARTESIAN_POINT('',(0.875,1.852187257439,1.35)); +#90581 = LINE('',#90582,#90583); +#90582 = CARTESIAN_POINT('',(0.875,9.227216610312,1.35)); +#90583 = VECTOR('',#90584,1.); +#90584 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#90585 = ORIENTED_EDGE('',*,*,#90586,.T.); +#90586 = EDGE_CURVE('',#90579,#90587,#90589,.T.); +#90587 = VERTEX_POINT('',#90588); +#90588 = CARTESIAN_POINT('',(0.625,1.852187257439,1.35)); +#90589 = LINE('',#90590,#90591); +#90590 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90591 = VECTOR('',#90592,1.); +#90592 = DIRECTION('',(-1.,0.,0.)); +#90593 = ORIENTED_EDGE('',*,*,#90594,.T.); +#90594 = EDGE_CURVE('',#90587,#90569,#90595,.T.); +#90595 = LINE('',#90596,#90597); +#90596 = CARTESIAN_POINT('',(0.625,9.227216610312,1.35)); +#90597 = VECTOR('',#90598,1.); +#90598 = DIRECTION('',(2.602085213965E-16,-1.,0.)); +#90599 = FACE_BOUND('',#90600,.T.); +#90600 = EDGE_LOOP('',(#90601,#90611,#90619,#90627)); +#90601 = ORIENTED_EDGE('',*,*,#90602,.T.); +#90602 = EDGE_CURVE('',#90603,#90605,#90607,.T.); +#90603 = VERTEX_POINT('',#90604); +#90604 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.35)); +#90605 = VERTEX_POINT('',#90606); +#90606 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.35)); +#90607 = LINE('',#90608,#90609); +#90608 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90609 = VECTOR('',#90610,1.); +#90610 = DIRECTION('',(1.,0.,-0.)); +#90611 = ORIENTED_EDGE('',*,*,#90612,.T.); +#90612 = EDGE_CURVE('',#90605,#90613,#90615,.T.); +#90613 = VERTEX_POINT('',#90614); +#90614 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.35)); +#90615 = LINE('',#90616,#90617); +#90616 = CARTESIAN_POINT('',(-1.125,9.227216610312,1.35)); +#90617 = VECTOR('',#90618,1.); +#90618 = DIRECTION('',(0.,1.,0.)); +#90619 = ORIENTED_EDGE('',*,*,#90620,.T.); +#90620 = EDGE_CURVE('',#90613,#90621,#90623,.T.); +#90621 = VERTEX_POINT('',#90622); +#90622 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.35)); +#90623 = LINE('',#90624,#90625); +#90624 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90625 = VECTOR('',#90626,1.); +#90626 = DIRECTION('',(-1.,0.,0.)); +#90627 = ORIENTED_EDGE('',*,*,#90628,.T.); +#90628 = EDGE_CURVE('',#90621,#90603,#90629,.T.); +#90629 = LINE('',#90630,#90631); +#90630 = CARTESIAN_POINT('',(-1.375,9.227216610312,1.35)); +#90631 = VECTOR('',#90632,1.); +#90632 = DIRECTION('',(0.,-1.,0.)); +#90633 = FACE_BOUND('',#90634,.T.); +#90634 = EDGE_LOOP('',(#90635,#90645,#90653,#90661)); +#90635 = ORIENTED_EDGE('',*,*,#90636,.T.); +#90636 = EDGE_CURVE('',#90637,#90639,#90641,.T.); +#90637 = VERTEX_POINT('',#90638); +#90638 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.35)); +#90639 = VERTEX_POINT('',#90640); +#90640 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.35)); +#90641 = LINE('',#90642,#90643); +#90642 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90643 = VECTOR('',#90644,1.); +#90644 = DIRECTION('',(1.,0.,-0.)); +#90645 = ORIENTED_EDGE('',*,*,#90646,.T.); +#90646 = EDGE_CURVE('',#90639,#90647,#90649,.T.); +#90647 = VERTEX_POINT('',#90648); +#90648 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.35)); +#90649 = LINE('',#90650,#90651); +#90650 = CARTESIAN_POINT('',(-0.625,9.227216610312,1.35)); +#90651 = VECTOR('',#90652,1.); +#90652 = DIRECTION('',(0.,1.,0.)); +#90653 = ORIENTED_EDGE('',*,*,#90654,.T.); +#90654 = EDGE_CURVE('',#90647,#90655,#90657,.T.); +#90655 = VERTEX_POINT('',#90656); +#90656 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.35)); +#90657 = LINE('',#90658,#90659); +#90658 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90659 = VECTOR('',#90660,1.); +#90660 = DIRECTION('',(-1.,0.,0.)); +#90661 = ORIENTED_EDGE('',*,*,#90662,.T.); +#90662 = EDGE_CURVE('',#90655,#90637,#90663,.T.); +#90663 = LINE('',#90664,#90665); +#90664 = CARTESIAN_POINT('',(-0.875,9.227216610312,1.35)); +#90665 = VECTOR('',#90666,1.); +#90666 = DIRECTION('',(0.,-1.,0.)); +#90667 = FACE_BOUND('',#90668,.T.); +#90668 = EDGE_LOOP('',(#90669,#90679,#90687,#90695)); +#90669 = ORIENTED_EDGE('',*,*,#90670,.T.); +#90670 = EDGE_CURVE('',#90671,#90673,#90675,.T.); +#90671 = VERTEX_POINT('',#90672); +#90672 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.35)); +#90673 = VERTEX_POINT('',#90674); +#90674 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.35)); +#90675 = LINE('',#90676,#90677); +#90676 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90677 = VECTOR('',#90678,1.); +#90678 = DIRECTION('',(1.,0.,-0.)); +#90679 = ORIENTED_EDGE('',*,*,#90680,.T.); +#90680 = EDGE_CURVE('',#90673,#90681,#90683,.T.); +#90681 = VERTEX_POINT('',#90682); +#90682 = CARTESIAN_POINT('',(1.375,1.852187257439,1.35)); +#90683 = LINE('',#90684,#90685); +#90684 = CARTESIAN_POINT('',(1.375,9.227216610312,1.35)); +#90685 = VECTOR('',#90686,1.); +#90686 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#90687 = ORIENTED_EDGE('',*,*,#90688,.T.); +#90688 = EDGE_CURVE('',#90681,#90689,#90691,.T.); +#90689 = VERTEX_POINT('',#90690); +#90690 = CARTESIAN_POINT('',(1.125,1.852187257439,1.35)); +#90691 = LINE('',#90692,#90693); +#90692 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90693 = VECTOR('',#90694,1.); +#90694 = DIRECTION('',(-1.,0.,0.)); +#90695 = ORIENTED_EDGE('',*,*,#90696,.T.); +#90696 = EDGE_CURVE('',#90689,#90671,#90697,.T.); +#90697 = LINE('',#90698,#90699); +#90698 = CARTESIAN_POINT('',(1.125,9.227216610312,1.35)); +#90699 = VECTOR('',#90700,1.); +#90700 = DIRECTION('',(3.469446951954E-16,-1.,0.)); +#90701 = FACE_BOUND('',#90702,.T.); +#90702 = EDGE_LOOP('',(#90703,#90713,#90721,#90729)); +#90703 = ORIENTED_EDGE('',*,*,#90704,.T.); +#90704 = EDGE_CURVE('',#90705,#90707,#90709,.T.); +#90705 = VERTEX_POINT('',#90706); +#90706 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.35)); +#90707 = VERTEX_POINT('',#90708); +#90708 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.35)); +#90709 = LINE('',#90710,#90711); +#90710 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90711 = VECTOR('',#90712,1.); +#90712 = DIRECTION('',(1.,0.,-0.)); +#90713 = ORIENTED_EDGE('',*,*,#90714,.T.); +#90714 = EDGE_CURVE('',#90707,#90715,#90717,.T.); +#90715 = VERTEX_POINT('',#90716); +#90716 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.35)); +#90717 = LINE('',#90718,#90719); +#90718 = CARTESIAN_POINT('',(-0.125,9.227216610312,1.35)); +#90719 = VECTOR('',#90720,1.); +#90720 = DIRECTION('',(0.,1.,0.)); +#90721 = ORIENTED_EDGE('',*,*,#90722,.T.); +#90722 = EDGE_CURVE('',#90715,#90723,#90725,.T.); +#90723 = VERTEX_POINT('',#90724); +#90724 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.35)); +#90725 = LINE('',#90726,#90727); +#90726 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90727 = VECTOR('',#90728,1.); +#90728 = DIRECTION('',(-1.,0.,0.)); +#90729 = ORIENTED_EDGE('',*,*,#90730,.T.); +#90730 = EDGE_CURVE('',#90723,#90705,#90731,.T.); +#90731 = LINE('',#90732,#90733); +#90732 = CARTESIAN_POINT('',(-0.375,9.227216610312,1.35)); +#90733 = VECTOR('',#90734,1.); +#90734 = DIRECTION('',(0.,-1.,0.)); +#90735 = FACE_BOUND('',#90736,.T.); +#90736 = EDGE_LOOP('',(#90737,#90747,#90755,#90763)); +#90737 = ORIENTED_EDGE('',*,*,#90738,.T.); +#90738 = EDGE_CURVE('',#90739,#90741,#90743,.T.); +#90739 = VERTEX_POINT('',#90740); +#90740 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.35)); +#90741 = VERTEX_POINT('',#90742); +#90742 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.35)); +#90743 = LINE('',#90744,#90745); +#90744 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.35)); +#90745 = VECTOR('',#90746,1.); +#90746 = DIRECTION('',(1.,1.807003620809E-16,-0.)); +#90747 = ORIENTED_EDGE('',*,*,#90748,.T.); +#90748 = EDGE_CURVE('',#90741,#90749,#90751,.T.); +#90749 = VERTEX_POINT('',#90750); +#90750 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.35)); +#90751 = LINE('',#90752,#90753); +#90752 = CARTESIAN_POINT('',(-2.2,9.227216610312,1.35)); +#90753 = VECTOR('',#90754,1.); +#90754 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#90755 = ORIENTED_EDGE('',*,*,#90756,.T.); +#90756 = EDGE_CURVE('',#90749,#90757,#90759,.T.); +#90757 = VERTEX_POINT('',#90758); +#90758 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.35)); +#90759 = LINE('',#90760,#90761); +#90760 = CARTESIAN_POINT('',(-3.,1.852187257439,1.35)); +#90761 = VECTOR('',#90762,1.); +#90762 = DIRECTION('',(-1.,0.,0.)); +#90763 = ORIENTED_EDGE('',*,*,#90764,.T.); +#90764 = EDGE_CURVE('',#90757,#90739,#90765,.T.); +#90765 = LINE('',#90766,#90767); +#90766 = CARTESIAN_POINT('',(-2.8,9.227216610312,1.35)); +#90767 = VECTOR('',#90768,1.); +#90768 = DIRECTION('',(-1.734723475977E-16,-1.,0.)); +#90769 = FACE_BOUND('',#90770,.T.); +#90770 = EDGE_LOOP('',(#90771,#90779,#90787,#90793)); +#90771 = ORIENTED_EDGE('',*,*,#90772,.F.); +#90772 = EDGE_CURVE('',#90773,#90254,#90775,.T.); +#90773 = VERTEX_POINT('',#90774); +#90774 = CARTESIAN_POINT('',(-3.,2.05,1.35)); +#90775 = LINE('',#90776,#90777); +#90776 = CARTESIAN_POINT('',(-3.,9.227216610312,1.35)); +#90777 = VECTOR('',#90778,1.); +#90778 = DIRECTION('',(-0.,-1.,-0.)); +#90779 = ORIENTED_EDGE('',*,*,#90780,.T.); +#90780 = EDGE_CURVE('',#90773,#90781,#90783,.T.); +#90781 = VERTEX_POINT('',#90782); +#90782 = CARTESIAN_POINT('',(3.,2.05,1.35)); +#90783 = LINE('',#90784,#90785); +#90784 = CARTESIAN_POINT('',(-3.,2.05,1.35)); +#90785 = VECTOR('',#90786,1.); +#90786 = DIRECTION('',(1.,0.,-0.)); +#90787 = ORIENTED_EDGE('',*,*,#90788,.T.); +#90788 = EDGE_CURVE('',#90781,#90263,#90789,.T.); +#90789 = LINE('',#90790,#90791); +#90790 = CARTESIAN_POINT('',(3.,9.227216610312,1.35)); +#90791 = VECTOR('',#90792,1.); +#90792 = DIRECTION('',(-0.,-1.,-0.)); +#90793 = ORIENTED_EDGE('',*,*,#90262,.T.); +#90794 = PLANE('',#90795); +#90795 = AXIS2_PLACEMENT_3D('',#90796,#90797,#90798); +#90796 = CARTESIAN_POINT('',(-3.,9.227216610312,1.35)); +#90797 = DIRECTION('',(0.,0.,1.)); +#90798 = DIRECTION('',(1.,0.,-0.)); +#90799 = ADVANCED_FACE('',(#90800),#90812,.T.); +#90800 = FACE_BOUND('',#90801,.T.); +#90801 = EDGE_LOOP('',(#90802,#90803,#90810,#90811)); +#90802 = ORIENTED_EDGE('',*,*,#90788,.F.); +#90803 = ORIENTED_EDGE('',*,*,#90804,.T.); +#90804 = EDGE_CURVE('',#90781,#80366,#90805,.T.); +#90805 = CIRCLE('',#90806,0.3); +#90806 = AXIS2_PLACEMENT_3D('',#90807,#90808,#90809); +#90807 = CARTESIAN_POINT('',(3.,2.05,1.65)); +#90808 = DIRECTION('',(0.,-1.,0.)); +#90809 = DIRECTION('',(0.,0.,-1.)); +#90810 = ORIENTED_EDGE('',*,*,#80365,.T.); +#90811 = ORIENTED_EDGE('',*,*,#90270,.T.); +#90812 = CYLINDRICAL_SURFACE('',#90813,0.3); +#90813 = AXIS2_PLACEMENT_3D('',#90814,#90815,#90816); +#90814 = CARTESIAN_POINT('',(3.,9.227216610312,1.65)); +#90815 = DIRECTION('',(-0.,-1.,-0.)); +#90816 = DIRECTION('',(0.,0.,-1.)); +#90817 = ADVANCED_FACE('',(#90818),#90830,.T.); +#90818 = FACE_BOUND('',#90819,.T.); +#90819 = EDGE_LOOP('',(#90820,#90821,#90828,#90829)); +#90820 = ORIENTED_EDGE('',*,*,#80383,.F.); +#90821 = ORIENTED_EDGE('',*,*,#90822,.T.); +#90822 = EDGE_CURVE('',#80376,#90773,#90823,.T.); +#90823 = CIRCLE('',#90824,0.3); +#90824 = AXIS2_PLACEMENT_3D('',#90825,#90826,#90827); +#90825 = CARTESIAN_POINT('',(-3.,2.05,1.65)); +#90826 = DIRECTION('',(0.,-1.,0.)); +#90827 = DIRECTION('',(0.,0.,-1.)); +#90828 = ORIENTED_EDGE('',*,*,#90772,.T.); +#90829 = ORIENTED_EDGE('',*,*,#90253,.T.); +#90830 = CYLINDRICAL_SURFACE('',#90831,0.3); +#90831 = AXIS2_PLACEMENT_3D('',#90832,#90833,#90834); +#90832 = CARTESIAN_POINT('',(-3.,9.227216610312,1.65)); +#90833 = DIRECTION('',(-0.,-1.,-0.)); +#90834 = DIRECTION('',(0.,0.,-1.)); +#90835 = ADVANCED_FACE('',(#90836),#90872,.F.); +#90836 = FACE_BOUND('',#90837,.T.); +#90837 = EDGE_LOOP('',(#90838,#90848,#90857,#90865)); +#90838 = ORIENTED_EDGE('',*,*,#90839,.T.); +#90839 = EDGE_CURVE('',#90840,#90842,#90844,.T.); +#90840 = VERTEX_POINT('',#90841); +#90841 = CARTESIAN_POINT('',(3.,2.3,1.6)); +#90842 = VERTEX_POINT('',#90843); +#90843 = CARTESIAN_POINT('',(-3.,2.3,1.6)); +#90844 = LINE('',#90845,#90846); +#90845 = CARTESIAN_POINT('',(-4.47,2.3,1.6)); +#90846 = VECTOR('',#90847,1.); +#90847 = DIRECTION('',(-1.,-0.,-0.)); +#90848 = ORIENTED_EDGE('',*,*,#90849,.T.); +#90849 = EDGE_CURVE('',#90842,#90850,#90852,.T.); +#90850 = VERTEX_POINT('',#90851); +#90851 = CARTESIAN_POINT('',(-3.,2.3,1.7)); +#90852 = CIRCLE('',#90853,5.E-02); +#90853 = AXIS2_PLACEMENT_3D('',#90854,#90855,#90856); +#90854 = CARTESIAN_POINT('',(-3.,2.3,1.65)); +#90855 = DIRECTION('',(-0.,1.,0.)); +#90856 = DIRECTION('',(0.,0.,-1.)); +#90857 = ORIENTED_EDGE('',*,*,#90858,.T.); +#90858 = EDGE_CURVE('',#90850,#90859,#90861,.T.); +#90859 = VERTEX_POINT('',#90860); +#90860 = CARTESIAN_POINT('',(3.,2.3,1.7)); +#90861 = LINE('',#90862,#90863); +#90862 = CARTESIAN_POINT('',(-4.47,2.3,1.7)); +#90863 = VECTOR('',#90864,1.); +#90864 = DIRECTION('',(1.,-0.,-0.)); +#90865 = ORIENTED_EDGE('',*,*,#90866,.T.); +#90866 = EDGE_CURVE('',#90859,#90840,#90867,.T.); +#90867 = CIRCLE('',#90868,5.E-02); +#90868 = AXIS2_PLACEMENT_3D('',#90869,#90870,#90871); +#90869 = CARTESIAN_POINT('',(3.,2.3,1.65)); +#90870 = DIRECTION('',(-0.,1.,0.)); +#90871 = DIRECTION('',(0.,0.,-1.)); +#90872 = PLANE('',#90873); +#90873 = AXIS2_PLACEMENT_3D('',#90874,#90875,#90876); +#90874 = CARTESIAN_POINT('',(-4.47,2.3,3.25)); +#90875 = DIRECTION('',(0.,-1.,0.)); +#90876 = DIRECTION('',(0.,-0.,-1.)); +#90877 = ADVANCED_FACE('',(#90878),#90896,.T.); +#90878 = FACE_BOUND('',#90879,.T.); +#90879 = EDGE_LOOP('',(#90880,#90887,#90888,#90895)); +#90880 = ORIENTED_EDGE('',*,*,#90881,.F.); +#90881 = EDGE_CURVE('',#90840,#90781,#90882,.T.); +#90882 = CIRCLE('',#90883,0.25); +#90883 = AXIS2_PLACEMENT_3D('',#90884,#90885,#90886); +#90884 = CARTESIAN_POINT('',(3.,2.05,1.6)); +#90885 = DIRECTION('',(-1.,0.,0.)); +#90886 = DIRECTION('',(0.,0.,1.)); +#90887 = ORIENTED_EDGE('',*,*,#90866,.F.); +#90888 = ORIENTED_EDGE('',*,*,#90889,.F.); +#90889 = EDGE_CURVE('',#80366,#90859,#90890,.T.); +#90890 = CIRCLE('',#90891,0.25); +#90891 = AXIS2_PLACEMENT_3D('',#90892,#90893,#90894); +#90892 = CARTESIAN_POINT('',(3.,2.05,1.7)); +#90893 = DIRECTION('',(-1.,0.,0.)); +#90894 = DIRECTION('',(0.,0.,1.)); +#90895 = ORIENTED_EDGE('',*,*,#90804,.F.); +#90896 = SURFACE_OF_REVOLUTION('',#90897,#90905); +#90897 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#90898,#90899,#90900,#90901, + #90902,#90903,#90904),.UNSPECIFIED.,.F.,.F.,(7,7),(4.712388980385, + 6.28318530718),.PIECEWISE_BEZIER_KNOTS.); +#90898 = CARTESIAN_POINT('',(3.,2.3,1.6)); +#90899 = CARTESIAN_POINT('',(3.,2.3,1.53455015305)); +#90900 = CARTESIAN_POINT('',(3.,2.279443078495,1.469105874824)); +#90901 = CARTESIAN_POINT('',(3.,2.23829753741,1.41170246259)); +#90902 = CARTESIAN_POINT('',(3.,2.180894125176,1.370556921505)); +#90903 = CARTESIAN_POINT('',(3.,2.11544984695,1.35)); +#90904 = CARTESIAN_POINT('',(3.,2.05,1.35)); +#90905 = AXIS1_PLACEMENT('',#90906,#90907); +#90906 = CARTESIAN_POINT('',(3.,2.05,1.65)); +#90907 = DIRECTION('',(0.,-1.,0.)); +#90908 = ADVANCED_FACE('',(#90909),#90921,.T.); +#90909 = FACE_BOUND('',#90910,.T.); +#90910 = EDGE_LOOP('',(#90911,#90912,#90913,#90920)); +#90911 = ORIENTED_EDGE('',*,*,#90889,.T.); +#90912 = ORIENTED_EDGE('',*,*,#90858,.F.); +#90913 = ORIENTED_EDGE('',*,*,#90914,.F.); +#90914 = EDGE_CURVE('',#80376,#90850,#90915,.T.); +#90915 = CIRCLE('',#90916,0.25); +#90916 = AXIS2_PLACEMENT_3D('',#90917,#90918,#90919); +#90917 = CARTESIAN_POINT('',(-3.,2.05,1.7)); +#90918 = DIRECTION('',(-1.,0.,0.)); +#90919 = DIRECTION('',(0.,0.,1.)); +#90920 = ORIENTED_EDGE('',*,*,#80375,.F.); +#90921 = CYLINDRICAL_SURFACE('',#90922,0.25); +#90922 = AXIS2_PLACEMENT_3D('',#90923,#90924,#90925); +#90923 = CARTESIAN_POINT('',(-3.,2.05,1.7)); +#90924 = DIRECTION('',(-1.,0.,0.)); +#90925 = DIRECTION('',(0.,0.,1.)); +#90926 = ADVANCED_FACE('',(#90927),#90939,.T.); +#90927 = FACE_BOUND('',#90928,.T.); +#90928 = EDGE_LOOP('',(#90929,#90930,#90931,#90938)); +#90929 = ORIENTED_EDGE('',*,*,#90881,.T.); +#90930 = ORIENTED_EDGE('',*,*,#90780,.F.); +#90931 = ORIENTED_EDGE('',*,*,#90932,.F.); +#90932 = EDGE_CURVE('',#90842,#90773,#90933,.T.); +#90933 = CIRCLE('',#90934,0.25); +#90934 = AXIS2_PLACEMENT_3D('',#90935,#90936,#90937); +#90935 = CARTESIAN_POINT('',(-3.,2.05,1.6)); +#90936 = DIRECTION('',(-1.,0.,0.)); +#90937 = DIRECTION('',(0.,0.,1.)); +#90938 = ORIENTED_EDGE('',*,*,#90839,.F.); +#90939 = CYLINDRICAL_SURFACE('',#90940,0.25); +#90940 = AXIS2_PLACEMENT_3D('',#90941,#90942,#90943); +#90941 = CARTESIAN_POINT('',(-3.,2.05,1.6)); +#90942 = DIRECTION('',(1.,0.,-0.)); +#90943 = DIRECTION('',(0.,-0.,-1.)); +#90944 = ADVANCED_FACE('',(#90945),#90951,.T.); +#90945 = FACE_BOUND('',#90946,.T.); +#90946 = EDGE_LOOP('',(#90947,#90948,#90949,#90950)); +#90947 = ORIENTED_EDGE('',*,*,#90914,.T.); +#90948 = ORIENTED_EDGE('',*,*,#90849,.F.); +#90949 = ORIENTED_EDGE('',*,*,#90932,.T.); +#90950 = ORIENTED_EDGE('',*,*,#90822,.F.); +#90951 = SURFACE_OF_REVOLUTION('',#90952,#90960); +#90952 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#90953,#90954,#90955,#90956, + #90957,#90958,#90959),.UNSPECIFIED.,.F.,.F.,(7,7),(4.712388980385, + 6.28318530718),.PIECEWISE_BEZIER_KNOTS.); +#90953 = CARTESIAN_POINT('',(-3.,2.3,1.6)); +#90954 = CARTESIAN_POINT('',(-3.,2.3,1.53455015305)); +#90955 = CARTESIAN_POINT('',(-3.,2.279443078495,1.469105874824)); +#90956 = CARTESIAN_POINT('',(-3.,2.23829753741,1.41170246259)); +#90957 = CARTESIAN_POINT('',(-3.,2.180894125176,1.370556921505)); +#90958 = CARTESIAN_POINT('',(-3.,2.11544984695,1.35)); +#90959 = CARTESIAN_POINT('',(-3.,2.05,1.35)); +#90960 = AXIS1_PLACEMENT('',#90961,#90962); +#90961 = CARTESIAN_POINT('',(-3.,2.05,1.65)); +#90962 = DIRECTION('',(0.,-1.,0.)); +#90963 = ADVANCED_FACE('',(#90964),#90989,.F.); +#90964 = FACE_BOUND('',#90965,.T.); +#90965 = EDGE_LOOP('',(#90966,#90967,#90975,#90983)); +#90966 = ORIENTED_EDGE('',*,*,#88678,.F.); +#90967 = ORIENTED_EDGE('',*,*,#90968,.F.); +#90968 = EDGE_CURVE('',#90969,#81024,#90971,.T.); +#90969 = VERTEX_POINT('',#90970); +#90970 = CARTESIAN_POINT('',(-1.15,-4.7,2.95)); +#90971 = LINE('',#90972,#90973); +#90972 = CARTESIAN_POINT('',(-1.15,-13.4358800358,2.95)); +#90973 = VECTOR('',#90974,1.); +#90974 = DIRECTION('',(-0.,1.,-0.)); +#90975 = ORIENTED_EDGE('',*,*,#90976,.T.); +#90976 = EDGE_CURVE('',#90969,#90977,#90979,.T.); +#90977 = VERTEX_POINT('',#90978); +#90978 = CARTESIAN_POINT('',(1.15,-4.7,2.95)); +#90979 = LINE('',#90980,#90981); +#90980 = CARTESIAN_POINT('',(1.15,-4.7,2.95)); +#90981 = VECTOR('',#90982,1.); +#90982 = DIRECTION('',(1.,0.,0.)); +#90983 = ORIENTED_EDGE('',*,*,#90984,.T.); +#90984 = EDGE_CURVE('',#90977,#81065,#90985,.T.); +#90985 = LINE('',#90986,#90987); +#90986 = CARTESIAN_POINT('',(1.15,-13.4358800358,2.95)); +#90987 = VECTOR('',#90988,1.); +#90988 = DIRECTION('',(-0.,1.,-0.)); +#90989 = PLANE('',#90990); +#90990 = AXIS2_PLACEMENT_3D('',#90991,#90992,#90993); +#90991 = CARTESIAN_POINT('',(1.15,-13.4358800358,2.95)); +#90992 = DIRECTION('',(-0.,0.,-1.)); +#90993 = DIRECTION('',(-1.,0.,0.)); +#90994 = ADVANCED_FACE('',(#90995),#91013,.F.); +#90995 = FACE_BOUND('',#90996,.T.); +#90996 = EDGE_LOOP('',(#90997,#90998,#91006,#91012)); +#90997 = ORIENTED_EDGE('',*,*,#90051,.F.); +#90998 = ORIENTED_EDGE('',*,*,#90999,.T.); +#90999 = EDGE_CURVE('',#90044,#91000,#91002,.T.); +#91000 = VERTEX_POINT('',#91001); +#91001 = CARTESIAN_POINT('',(-3.1,-4.7,1.93)); +#91002 = LINE('',#91003,#91004); +#91003 = CARTESIAN_POINT('',(-3.1,-4.7,2.95)); +#91004 = VECTOR('',#91005,1.); +#91005 = DIRECTION('',(0.,0.,-1.)); +#91006 = ORIENTED_EDGE('',*,*,#91007,.T.); +#91007 = EDGE_CURVE('',#91000,#81106,#91008,.T.); +#91008 = LINE('',#91009,#91010); +#91009 = CARTESIAN_POINT('',(-3.1,-13.4358800358,1.93)); +#91010 = VECTOR('',#91011,1.); +#91011 = DIRECTION('',(-0.,1.,-0.)); +#91012 = ORIENTED_EDGE('',*,*,#81105,.T.); +#91013 = PLANE('',#91014); +#91014 = AXIS2_PLACEMENT_3D('',#91015,#91016,#91017); +#91015 = CARTESIAN_POINT('',(-3.1,-13.4358800358,2.95)); +#91016 = DIRECTION('',(-1.,0.,-0.)); +#91017 = DIRECTION('',(0.,0.,1.)); +#91018 = ADVANCED_FACE('',(#91019),#91037,.F.); +#91019 = FACE_BOUND('',#91020,.T.); +#91020 = EDGE_LOOP('',(#91021,#91022,#91030,#91036)); +#91021 = ORIENTED_EDGE('',*,*,#91007,.F.); +#91022 = ORIENTED_EDGE('',*,*,#91023,.T.); +#91023 = EDGE_CURVE('',#91000,#91024,#91026,.T.); +#91024 = VERTEX_POINT('',#91025); +#91025 = CARTESIAN_POINT('',(-1.15,-4.7,1.93)); +#91026 = LINE('',#91027,#91028); +#91027 = CARTESIAN_POINT('',(-3.1,-4.7,1.93)); +#91028 = VECTOR('',#91029,1.); +#91029 = DIRECTION('',(1.,-0.,0.)); +#91030 = ORIENTED_EDGE('',*,*,#91031,.T.); +#91031 = EDGE_CURVE('',#91024,#81116,#91032,.T.); +#91032 = LINE('',#91033,#91034); +#91033 = CARTESIAN_POINT('',(-1.15,-13.4358800358,1.93)); +#91034 = VECTOR('',#91035,1.); +#91035 = DIRECTION('',(-0.,1.,-0.)); +#91036 = ORIENTED_EDGE('',*,*,#81115,.T.); +#91037 = PLANE('',#91038); +#91038 = AXIS2_PLACEMENT_3D('',#91039,#91040,#91041); +#91039 = CARTESIAN_POINT('',(-3.1,-13.4358800358,1.93)); +#91040 = DIRECTION('',(0.,0.,-1.)); +#91041 = DIRECTION('',(-1.,0.,-0.)); +#91042 = ADVANCED_FACE('',(#91043),#91056,.F.); +#91043 = FACE_BOUND('',#91044,.T.); +#91044 = EDGE_LOOP('',(#91045,#91046,#91052,#91053,#91054,#91055)); +#91045 = ORIENTED_EDGE('',*,*,#91031,.F.); +#91046 = ORIENTED_EDGE('',*,*,#91047,.T.); +#91047 = EDGE_CURVE('',#91024,#90969,#91048,.T.); +#91048 = LINE('',#91049,#91050); +#91049 = CARTESIAN_POINT('',(-1.15,-4.7,2.95)); +#91050 = VECTOR('',#91051,1.); +#91051 = DIRECTION('',(0.,0.,1.)); +#91052 = ORIENTED_EDGE('',*,*,#90968,.T.); +#91053 = ORIENTED_EDGE('',*,*,#81023,.T.); +#91054 = ORIENTED_EDGE('',*,*,#90058,.T.); +#91055 = ORIENTED_EDGE('',*,*,#81123,.T.); +#91056 = PLANE('',#91057); +#91057 = AXIS2_PLACEMENT_3D('',#91058,#91059,#91060); +#91058 = CARTESIAN_POINT('',(-1.15,-13.4358800358,2.95)); +#91059 = DIRECTION('',(1.,0.,0.)); +#91060 = DIRECTION('',(0.,0.,-1.)); +#91061 = ADVANCED_FACE('',(#91062),#91082,.F.); +#91062 = FACE_BOUND('',#91063,.T.); +#91063 = EDGE_LOOP('',(#91064,#91065,#91073,#91079,#91080,#91081)); +#91064 = ORIENTED_EDGE('',*,*,#90984,.F.); +#91065 = ORIENTED_EDGE('',*,*,#91066,.T.); +#91066 = EDGE_CURVE('',#90977,#91067,#91069,.T.); +#91067 = VERTEX_POINT('',#91068); +#91068 = CARTESIAN_POINT('',(1.15,-4.7,1.93)); +#91069 = LINE('',#91070,#91071); +#91070 = CARTESIAN_POINT('',(1.15,-4.7,2.95)); +#91071 = VECTOR('',#91072,1.); +#91072 = DIRECTION('',(0.,0.,-1.)); +#91073 = ORIENTED_EDGE('',*,*,#91074,.T.); +#91074 = EDGE_CURVE('',#91067,#81146,#91075,.T.); +#91075 = LINE('',#91076,#91077); +#91076 = CARTESIAN_POINT('',(1.15,-13.4358800358,1.93)); +#91077 = VECTOR('',#91078,1.); +#91078 = DIRECTION('',(-0.,1.,-0.)); +#91079 = ORIENTED_EDGE('',*,*,#81145,.T.); +#91080 = ORIENTED_EDGE('',*,*,#90073,.F.); +#91081 = ORIENTED_EDGE('',*,*,#81064,.F.); +#91082 = PLANE('',#91083); +#91083 = AXIS2_PLACEMENT_3D('',#91084,#91085,#91086); +#91084 = CARTESIAN_POINT('',(1.15,-13.4358800358,2.95)); +#91085 = DIRECTION('',(-1.,0.,-0.)); +#91086 = DIRECTION('',(0.,0.,1.)); +#91087 = ADVANCED_FACE('',(#91088),#91106,.F.); +#91088 = FACE_BOUND('',#91089,.T.); +#91089 = EDGE_LOOP('',(#91090,#91091,#91099,#91105)); +#91090 = ORIENTED_EDGE('',*,*,#91074,.F.); +#91091 = ORIENTED_EDGE('',*,*,#91092,.T.); +#91092 = EDGE_CURVE('',#91067,#91093,#91095,.T.); +#91093 = VERTEX_POINT('',#91094); +#91094 = CARTESIAN_POINT('',(3.1,-4.7,1.93)); +#91095 = LINE('',#91096,#91097); +#91096 = CARTESIAN_POINT('',(1.15,-4.7,1.93)); +#91097 = VECTOR('',#91098,1.); +#91098 = DIRECTION('',(1.,-0.,0.)); +#91099 = ORIENTED_EDGE('',*,*,#91100,.T.); +#91100 = EDGE_CURVE('',#91093,#81156,#91101,.T.); +#91101 = LINE('',#91102,#91103); +#91102 = CARTESIAN_POINT('',(3.1,-13.4358800358,1.93)); +#91103 = VECTOR('',#91104,1.); +#91104 = DIRECTION('',(-0.,1.,-0.)); +#91105 = ORIENTED_EDGE('',*,*,#81155,.T.); +#91106 = PLANE('',#91107); +#91107 = AXIS2_PLACEMENT_3D('',#91108,#91109,#91110); +#91108 = CARTESIAN_POINT('',(1.15,-13.4358800358,1.93)); +#91109 = DIRECTION('',(0.,0.,-1.)); +#91110 = DIRECTION('',(-1.,0.,-0.)); +#91111 = ADVANCED_FACE('',(#91112),#91123,.F.); +#91112 = FACE_BOUND('',#91113,.T.); +#91113 = EDGE_LOOP('',(#91114,#91115,#91121,#91122)); +#91114 = ORIENTED_EDGE('',*,*,#91100,.F.); +#91115 = ORIENTED_EDGE('',*,*,#91116,.T.); +#91116 = EDGE_CURVE('',#91093,#90081,#91117,.T.); +#91117 = LINE('',#91118,#91119); +#91118 = CARTESIAN_POINT('',(3.1,-4.7,2.95)); +#91119 = VECTOR('',#91120,1.); +#91120 = DIRECTION('',(0.,0.,1.)); +#91121 = ORIENTED_EDGE('',*,*,#90080,.T.); +#91122 = ORIENTED_EDGE('',*,*,#81163,.T.); +#91123 = PLANE('',#91124); +#91124 = AXIS2_PLACEMENT_3D('',#91125,#91126,#91127); +#91125 = CARTESIAN_POINT('',(3.1,-13.4358800358,2.95)); +#91126 = DIRECTION('',(1.,0.,0.)); +#91127 = DIRECTION('',(0.,0.,-1.)); +#91128 = ADVANCED_FACE('',(#91129),#91148,.T.); +#91129 = FACE_BOUND('',#91130,.T.); +#91130 = EDGE_LOOP('',(#91131,#91132,#91133,#91142)); +#91131 = ORIENTED_EDGE('',*,*,#89002,.T.); +#91132 = ORIENTED_EDGE('',*,*,#90096,.F.); +#91133 = ORIENTED_EDGE('',*,*,#91134,.T.); +#91134 = EDGE_CURVE('',#90089,#91135,#91137,.T.); +#91135 = VERTEX_POINT('',#91136); +#91136 = CARTESIAN_POINT('',(4.17,-4.7,2.25)); +#91137 = CIRCLE('',#91138,0.7); +#91138 = AXIS2_PLACEMENT_3D('',#91139,#91140,#91141); +#91139 = CARTESIAN_POINT('',(3.47,-4.7,2.25)); +#91140 = DIRECTION('',(0.,1.,0.)); +#91141 = DIRECTION('',(0.,-0.,1.)); +#91142 = ORIENTED_EDGE('',*,*,#91143,.T.); +#91143 = EDGE_CURVE('',#91135,#89003,#91144,.T.); +#91144 = LINE('',#91145,#91146); +#91145 = CARTESIAN_POINT('',(4.17,-13.4358800358,2.25)); +#91146 = VECTOR('',#91147,1.); +#91147 = DIRECTION('',(-0.,1.,-0.)); +#91148 = CYLINDRICAL_SURFACE('',#91149,0.7); +#91149 = AXIS2_PLACEMENT_3D('',#91150,#91151,#91152); +#91150 = CARTESIAN_POINT('',(3.47,-13.4358800358,2.25)); +#91151 = DIRECTION('',(-0.,1.,-0.)); +#91152 = DIRECTION('',(0.,0.,1.)); +#91153 = ADVANCED_FACE('',(#91154),#91172,.F.); +#91154 = FACE_BOUND('',#91155,.T.); +#91155 = EDGE_LOOP('',(#91156,#91157,#91158,#91166)); +#91156 = ORIENTED_EDGE('',*,*,#89054,.F.); +#91157 = ORIENTED_EDGE('',*,*,#91143,.F.); +#91158 = ORIENTED_EDGE('',*,*,#91159,.T.); +#91159 = EDGE_CURVE('',#91135,#91160,#91162,.T.); +#91160 = VERTEX_POINT('',#91161); +#91161 = CARTESIAN_POINT('',(4.17,-4.7,0.75)); +#91162 = LINE('',#91163,#91164); +#91163 = CARTESIAN_POINT('',(4.17,-4.7,1.05)); +#91164 = VECTOR('',#91165,1.); +#91165 = DIRECTION('',(0.,0.,-1.)); +#91166 = ORIENTED_EDGE('',*,*,#91167,.F.); +#91167 = EDGE_CURVE('',#80968,#91160,#91168,.T.); +#91168 = LINE('',#91169,#91170); +#91169 = CARTESIAN_POINT('',(4.17,5.199738091155,0.75)); +#91170 = VECTOR('',#91171,1.); +#91171 = DIRECTION('',(0.,-1.,0.)); +#91172 = PLANE('',#91173); +#91173 = AXIS2_PLACEMENT_3D('',#91174,#91175,#91176); +#91174 = CARTESIAN_POINT('',(4.17,-13.4358800358,1.05)); +#91175 = DIRECTION('',(-1.,0.,0.)); +#91176 = DIRECTION('',(0.,0.,1.)); +#91177 = ADVANCED_FACE('',(#91178),#91203,.F.); +#91178 = FACE_BOUND('',#91179,.T.); +#91179 = EDGE_LOOP('',(#91180,#91181,#91189,#91197)); +#91180 = ORIENTED_EDGE('',*,*,#89475,.T.); +#91181 = ORIENTED_EDGE('',*,*,#91182,.T.); +#91182 = EDGE_CURVE('',#81196,#91183,#91185,.T.); +#91183 = VERTEX_POINT('',#91184); +#91184 = CARTESIAN_POINT('',(-4.17,-4.7,0.75)); +#91185 = LINE('',#91186,#91187); +#91186 = CARTESIAN_POINT('',(-4.17,5.199738091155,0.75)); +#91187 = VECTOR('',#91188,1.); +#91188 = DIRECTION('',(0.,-1.,0.)); +#91189 = ORIENTED_EDGE('',*,*,#91190,.T.); +#91190 = EDGE_CURVE('',#91183,#91191,#91193,.T.); +#91191 = VERTEX_POINT('',#91192); +#91192 = CARTESIAN_POINT('',(-4.17,-4.7,2.25)); +#91193 = LINE('',#91194,#91195); +#91194 = CARTESIAN_POINT('',(-4.17,-4.7,2.25)); +#91195 = VECTOR('',#91196,1.); +#91196 = DIRECTION('',(0.,0.,1.)); +#91197 = ORIENTED_EDGE('',*,*,#91198,.T.); +#91198 = EDGE_CURVE('',#91191,#89417,#91199,.T.); +#91199 = LINE('',#91200,#91201); +#91200 = CARTESIAN_POINT('',(-4.17,-13.4358800358,2.25)); +#91201 = VECTOR('',#91202,1.); +#91202 = DIRECTION('',(-0.,1.,-0.)); +#91203 = PLANE('',#91204); +#91204 = AXIS2_PLACEMENT_3D('',#91205,#91206,#91207); +#91205 = CARTESIAN_POINT('',(-4.17,-13.4358800358,2.25)); +#91206 = DIRECTION('',(1.,0.,0.)); +#91207 = DIRECTION('',(0.,0.,-1.)); +#91208 = ADVANCED_FACE('',(#91209),#91221,.T.); +#91209 = FACE_BOUND('',#91210,.T.); +#91210 = EDGE_LOOP('',(#91211,#91212,#91213,#91220)); +#91211 = ORIENTED_EDGE('',*,*,#89425,.T.); +#91212 = ORIENTED_EDGE('',*,*,#91198,.F.); +#91213 = ORIENTED_EDGE('',*,*,#91214,.T.); +#91214 = EDGE_CURVE('',#91191,#90036,#91215,.T.); +#91215 = CIRCLE('',#91216,0.7); +#91216 = AXIS2_PLACEMENT_3D('',#91217,#91218,#91219); +#91217 = CARTESIAN_POINT('',(-3.47,-4.7,2.25)); +#91218 = DIRECTION('',(0.,1.,0.)); +#91219 = DIRECTION('',(0.,-0.,1.)); +#91220 = ORIENTED_EDGE('',*,*,#90035,.T.); +#91221 = CYLINDRICAL_SURFACE('',#91222,0.7); +#91222 = AXIS2_PLACEMENT_3D('',#91223,#91224,#91225); +#91223 = CARTESIAN_POINT('',(-3.47,-13.4358800358,2.25)); +#91224 = DIRECTION('',(-0.,1.,-0.)); +#91225 = DIRECTION('',(0.,0.,1.)); +#91226 = ADVANCED_FACE('',(#91227),#91357,.F.); +#91227 = FACE_BOUND('',#91228,.T.); +#91228 = EDGE_LOOP('',(#91229,#91238,#91244,#91245,#91251,#91252,#91258, + #91259,#91265,#91266,#91272,#91273,#91279,#91280,#91286,#91287, + #91293,#91294,#91300,#91301,#91307,#91308,#91314,#91315,#91321, + #91322,#91328,#91329,#91337,#91344,#91345,#91346,#91347,#91348, + #91349,#91350,#91351,#91352,#91353,#91354,#91355,#91356)); +#91229 = ORIENTED_EDGE('',*,*,#91230,.T.); +#91230 = EDGE_CURVE('',#91183,#91231,#91233,.T.); +#91231 = VERTEX_POINT('',#91232); +#91232 = CARTESIAN_POINT('',(-3.47,-4.7,5.E-02)); +#91233 = CIRCLE('',#91234,0.7); +#91234 = AXIS2_PLACEMENT_3D('',#91235,#91236,#91237); +#91235 = CARTESIAN_POINT('',(-3.47,-4.7,0.75)); +#91236 = DIRECTION('',(0.,-1.,0.)); +#91237 = DIRECTION('',(0.,0.,-1.)); +#91238 = ORIENTED_EDGE('',*,*,#91239,.T.); +#91239 = EDGE_CURVE('',#91231,#80552,#91240,.T.); +#91240 = LINE('',#91241,#91242); +#91241 = CARTESIAN_POINT('',(-3.47,-4.7,3.25)); +#91242 = VECTOR('',#91243,1.); +#91243 = DIRECTION('',(0.,-0.,1.)); +#91244 = ORIENTED_EDGE('',*,*,#80551,.T.); +#91245 = ORIENTED_EDGE('',*,*,#91246,.T.); +#91246 = EDGE_CURVE('',#80542,#80936,#91247,.T.); +#91247 = LINE('',#91248,#91249); +#91248 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91249 = VECTOR('',#91250,1.); +#91250 = DIRECTION('',(1.,0.,-0.)); +#91251 = ORIENTED_EDGE('',*,*,#80935,.T.); +#91252 = ORIENTED_EDGE('',*,*,#91253,.T.); +#91253 = EDGE_CURVE('',#80928,#80904,#91254,.T.); +#91254 = LINE('',#91255,#91256); +#91255 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91256 = VECTOR('',#91257,1.); +#91257 = DIRECTION('',(1.,0.,-0.)); +#91258 = ORIENTED_EDGE('',*,*,#80903,.T.); +#91259 = ORIENTED_EDGE('',*,*,#91260,.T.); +#91260 = EDGE_CURVE('',#80896,#80872,#91261,.T.); +#91261 = LINE('',#91262,#91263); +#91262 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91263 = VECTOR('',#91264,1.); +#91264 = DIRECTION('',(1.,0.,-0.)); +#91265 = ORIENTED_EDGE('',*,*,#80871,.T.); +#91266 = ORIENTED_EDGE('',*,*,#91267,.T.); +#91267 = EDGE_CURVE('',#80864,#80840,#91268,.T.); +#91268 = LINE('',#91269,#91270); +#91269 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91270 = VECTOR('',#91271,1.); +#91271 = DIRECTION('',(1.,0.,-0.)); +#91272 = ORIENTED_EDGE('',*,*,#80839,.T.); +#91273 = ORIENTED_EDGE('',*,*,#91274,.T.); +#91274 = EDGE_CURVE('',#80832,#80808,#91275,.T.); +#91275 = LINE('',#91276,#91277); +#91276 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91277 = VECTOR('',#91278,1.); +#91278 = DIRECTION('',(1.,0.,-0.)); +#91279 = ORIENTED_EDGE('',*,*,#80807,.T.); +#91280 = ORIENTED_EDGE('',*,*,#91281,.T.); +#91281 = EDGE_CURVE('',#80800,#80776,#91282,.T.); +#91282 = LINE('',#91283,#91284); +#91283 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91284 = VECTOR('',#91285,1.); +#91285 = DIRECTION('',(1.,0.,-0.)); +#91286 = ORIENTED_EDGE('',*,*,#80775,.T.); +#91287 = ORIENTED_EDGE('',*,*,#91288,.T.); +#91288 = EDGE_CURVE('',#80768,#80744,#91289,.T.); +#91289 = LINE('',#91290,#91291); +#91290 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91291 = VECTOR('',#91292,1.); +#91292 = DIRECTION('',(1.,0.,-0.)); +#91293 = ORIENTED_EDGE('',*,*,#80743,.T.); +#91294 = ORIENTED_EDGE('',*,*,#91295,.T.); +#91295 = EDGE_CURVE('',#80736,#80712,#91296,.T.); +#91296 = LINE('',#91297,#91298); +#91297 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91298 = VECTOR('',#91299,1.); +#91299 = DIRECTION('',(1.,0.,-0.)); +#91300 = ORIENTED_EDGE('',*,*,#80711,.T.); +#91301 = ORIENTED_EDGE('',*,*,#91302,.T.); +#91302 = EDGE_CURVE('',#80704,#80680,#91303,.T.); +#91303 = LINE('',#91304,#91305); +#91304 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91305 = VECTOR('',#91306,1.); +#91306 = DIRECTION('',(1.,0.,-0.)); +#91307 = ORIENTED_EDGE('',*,*,#80679,.T.); +#91308 = ORIENTED_EDGE('',*,*,#91309,.T.); +#91309 = EDGE_CURVE('',#80672,#80648,#91310,.T.); +#91310 = LINE('',#91311,#91312); +#91311 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91312 = VECTOR('',#91313,1.); +#91313 = DIRECTION('',(1.,0.,-0.)); +#91314 = ORIENTED_EDGE('',*,*,#80647,.T.); +#91315 = ORIENTED_EDGE('',*,*,#91316,.T.); +#91316 = EDGE_CURVE('',#80640,#80616,#91317,.T.); +#91317 = LINE('',#91318,#91319); +#91318 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91319 = VECTOR('',#91320,1.); +#91320 = DIRECTION('',(1.,0.,-0.)); +#91321 = ORIENTED_EDGE('',*,*,#80615,.T.); +#91322 = ORIENTED_EDGE('',*,*,#91323,.T.); +#91323 = EDGE_CURVE('',#80608,#80584,#91324,.T.); +#91324 = LINE('',#91325,#91326); +#91325 = CARTESIAN_POINT('',(-4.47,-4.7,0.2)); +#91326 = VECTOR('',#91327,1.); +#91327 = DIRECTION('',(1.,0.,-0.)); +#91328 = ORIENTED_EDGE('',*,*,#80583,.T.); +#91329 = ORIENTED_EDGE('',*,*,#91330,.T.); +#91330 = EDGE_CURVE('',#80576,#91331,#91333,.T.); +#91331 = VERTEX_POINT('',#91332); +#91332 = CARTESIAN_POINT('',(3.47,-4.7,5.E-02)); +#91333 = LINE('',#91334,#91335); +#91334 = CARTESIAN_POINT('',(3.47,-4.7,3.25)); +#91335 = VECTOR('',#91336,1.); +#91336 = DIRECTION('',(0.,0.,-1.)); +#91337 = ORIENTED_EDGE('',*,*,#91338,.T.); +#91338 = EDGE_CURVE('',#91331,#91160,#91339,.T.); +#91339 = CIRCLE('',#91340,0.7); +#91340 = AXIS2_PLACEMENT_3D('',#91341,#91342,#91343); +#91341 = CARTESIAN_POINT('',(3.47,-4.7,0.75)); +#91342 = DIRECTION('',(0.,-1.,0.)); +#91343 = DIRECTION('',(0.,0.,-1.)); +#91344 = ORIENTED_EDGE('',*,*,#91159,.F.); +#91345 = ORIENTED_EDGE('',*,*,#91134,.F.); +#91346 = ORIENTED_EDGE('',*,*,#90088,.F.); +#91347 = ORIENTED_EDGE('',*,*,#91116,.F.); +#91348 = ORIENTED_EDGE('',*,*,#91092,.F.); +#91349 = ORIENTED_EDGE('',*,*,#91066,.F.); +#91350 = ORIENTED_EDGE('',*,*,#90976,.F.); +#91351 = ORIENTED_EDGE('',*,*,#91047,.F.); +#91352 = ORIENTED_EDGE('',*,*,#91023,.F.); +#91353 = ORIENTED_EDGE('',*,*,#90999,.F.); +#91354 = ORIENTED_EDGE('',*,*,#90043,.F.); +#91355 = ORIENTED_EDGE('',*,*,#91214,.F.); +#91356 = ORIENTED_EDGE('',*,*,#91190,.F.); +#91357 = PLANE('',#91358); +#91358 = AXIS2_PLACEMENT_3D('',#91359,#91360,#91361); +#91359 = CARTESIAN_POINT('',(-4.47,-4.7,3.25)); +#91360 = DIRECTION('',(0.,1.,0.)); +#91361 = DIRECTION('',(0.,-0.,1.)); +#91362 = ADVANCED_FACE('',(#91363),#91394,.T.); +#91363 = FACE_BOUND('',#91364,.T.); +#91364 = EDGE_LOOP('',(#91365,#91366,#91367,#91376,#91384,#91391,#91392, + #91393)); +#91365 = ORIENTED_EDGE('',*,*,#90200,.F.); +#91366 = ORIENTED_EDGE('',*,*,#90235,.F.); +#91367 = ORIENTED_EDGE('',*,*,#91368,.F.); +#91368 = EDGE_CURVE('',#91369,#90228,#91371,.T.); +#91369 = VERTEX_POINT('',#91370); +#91370 = CARTESIAN_POINT('',(3.47,-3.22,5.E-02)); +#91371 = CIRCLE('',#91372,0.7); +#91372 = AXIS2_PLACEMENT_3D('',#91373,#91374,#91375); +#91373 = CARTESIAN_POINT('',(3.47,-3.22,0.75)); +#91374 = DIRECTION('',(0.,-1.,0.)); +#91375 = DIRECTION('',(1.858632295689E-15,0.,1.)); +#91376 = ORIENTED_EDGE('',*,*,#91377,.F.); +#91377 = EDGE_CURVE('',#91378,#91369,#91380,.T.); +#91378 = VERTEX_POINT('',#91379); +#91379 = CARTESIAN_POINT('',(-3.47,-3.22,5.E-02)); +#91380 = LINE('',#91381,#91382); +#91381 = CARTESIAN_POINT('',(-3.47,-3.22,5.E-02)); +#91382 = VECTOR('',#91383,1.); +#91383 = DIRECTION('',(1.,0.,0.)); +#91384 = ORIENTED_EDGE('',*,*,#91385,.F.); +#91385 = EDGE_CURVE('',#90126,#91378,#91386,.T.); +#91386 = CIRCLE('',#91387,0.7); +#91387 = AXIS2_PLACEMENT_3D('',#91388,#91389,#91390); +#91388 = CARTESIAN_POINT('',(-3.47,-3.22,0.75)); +#91389 = DIRECTION('',(0.,-1.,0.)); +#91390 = DIRECTION('',(0.,0.,1.)); +#91391 = ORIENTED_EDGE('',*,*,#90125,.F.); +#91392 = ORIENTED_EDGE('',*,*,#90151,.F.); +#91393 = ORIENTED_EDGE('',*,*,#90176,.F.); +#91394 = PLANE('',#91395); +#91395 = AXIS2_PLACEMENT_3D('',#91396,#91397,#91398); +#91396 = CARTESIAN_POINT('',(4.47,-3.22,12.314965526686)); +#91397 = DIRECTION('',(0.,1.,-0.)); +#91398 = DIRECTION('',(0.,0.,1.)); +#91399 = ADVANCED_FACE('',(#91400),#91421,.T.); +#91400 = FACE_BOUND('',#91401,.T.); +#91401 = EDGE_LOOP('',(#91402,#91403,#91404,#91412,#91418,#91419,#91420) + ); +#91402 = ORIENTED_EDGE('',*,*,#90133,.F.); +#91403 = ORIENTED_EDGE('',*,*,#91385,.T.); +#91404 = ORIENTED_EDGE('',*,*,#91405,.T.); +#91405 = EDGE_CURVE('',#91378,#91406,#91408,.T.); +#91406 = VERTEX_POINT('',#91407); +#91407 = CARTESIAN_POINT('',(-3.47,-4.2,5.E-02)); +#91408 = LINE('',#91409,#91410); +#91409 = CARTESIAN_POINT('',(-3.47,5.199738091155,5.E-02)); +#91410 = VECTOR('',#91411,1.); +#91411 = DIRECTION('',(0.,-1.,0.)); +#91412 = ORIENTED_EDGE('',*,*,#91413,.F.); +#91413 = EDGE_CURVE('',#91231,#91406,#91414,.T.); +#91414 = LINE('',#91415,#91416); +#91415 = CARTESIAN_POINT('',(-3.47,-5.2,5.E-02)); +#91416 = VECTOR('',#91417,1.); +#91417 = DIRECTION('',(0.,1.,0.)); +#91418 = ORIENTED_EDGE('',*,*,#91230,.F.); +#91419 = ORIENTED_EDGE('',*,*,#91182,.F.); +#91420 = ORIENTED_EDGE('',*,*,#81195,.F.); +#91421 = CYLINDRICAL_SURFACE('',#91422,0.7); +#91422 = AXIS2_PLACEMENT_3D('',#91423,#91424,#91425); +#91423 = CARTESIAN_POINT('',(-3.47,5.199738091155,0.75)); +#91424 = DIRECTION('',(0.,-1.,0.)); +#91425 = DIRECTION('',(0.,0.,-1.)); +#91426 = ADVANCED_FACE('',(#91427,#91445,#91455),#91465,.T.); +#91427 = FACE_BOUND('',#91428,.T.); +#91428 = EDGE_LOOP('',(#91429,#91437,#91438,#91439)); +#91429 = ORIENTED_EDGE('',*,*,#91430,.F.); +#91430 = EDGE_CURVE('',#91406,#91431,#91433,.T.); +#91431 = VERTEX_POINT('',#91432); +#91432 = CARTESIAN_POINT('',(3.47,-4.2,5.E-02)); +#91433 = LINE('',#91434,#91435); +#91434 = CARTESIAN_POINT('',(3.47,-4.2,5.E-02)); +#91435 = VECTOR('',#91436,1.); +#91436 = DIRECTION('',(1.,-0.,-0.)); +#91437 = ORIENTED_EDGE('',*,*,#91405,.F.); +#91438 = ORIENTED_EDGE('',*,*,#91377,.T.); +#91439 = ORIENTED_EDGE('',*,*,#91440,.T.); +#91440 = EDGE_CURVE('',#91369,#91431,#91441,.T.); +#91441 = LINE('',#91442,#91443); +#91442 = CARTESIAN_POINT('',(3.47,5.199738091155,5.E-02)); +#91443 = VECTOR('',#91444,1.); +#91444 = DIRECTION('',(0.,-1.,0.)); +#91445 = FACE_BOUND('',#91446,.T.); +#91446 = EDGE_LOOP('',(#91447,#91454)); +#91447 = ORIENTED_EDGE('',*,*,#91448,.F.); +#91448 = EDGE_CURVE('',#79527,#79519,#91449,.T.); +#91449 = CIRCLE('',#91450,0.25); +#91450 = AXIS2_PLACEMENT_3D('',#91451,#91452,#91453); +#91451 = CARTESIAN_POINT('',(-2.89,-3.65,5.E-02)); +#91452 = DIRECTION('',(0.,0.,-1.)); +#91453 = DIRECTION('',(-1.,0.,0.)); +#91454 = ORIENTED_EDGE('',*,*,#79526,.F.); +#91455 = FACE_BOUND('',#91456,.T.); +#91456 = EDGE_LOOP('',(#91457,#91464)); +#91457 = ORIENTED_EDGE('',*,*,#91458,.F.); +#91458 = EDGE_CURVE('',#79559,#79551,#91459,.T.); +#91459 = CIRCLE('',#91460,0.25); +#91460 = AXIS2_PLACEMENT_3D('',#91461,#91462,#91463); +#91461 = CARTESIAN_POINT('',(2.89,-3.65,5.E-02)); +#91462 = DIRECTION('',(0.,0.,-1.)); +#91463 = DIRECTION('',(-1.,0.,0.)); +#91464 = ORIENTED_EDGE('',*,*,#79558,.F.); +#91465 = PLANE('',#91466); +#91466 = AXIS2_PLACEMENT_3D('',#91467,#91468,#91469); +#91467 = CARTESIAN_POINT('',(-3.47,5.199738091155,5.E-02)); +#91468 = DIRECTION('',(0.,0.,-1.)); +#91469 = DIRECTION('',(-1.,0.,-0.)); +#91470 = ADVANCED_FACE('',(#91471),#91485,.T.); +#91471 = FACE_BOUND('',#91472,.T.); +#91472 = EDGE_LOOP('',(#91473,#91474,#91475,#91476,#91477,#91478,#91479) + ); +#91473 = ORIENTED_EDGE('',*,*,#91440,.F.); +#91474 = ORIENTED_EDGE('',*,*,#91368,.T.); +#91475 = ORIENTED_EDGE('',*,*,#90227,.T.); +#91476 = ORIENTED_EDGE('',*,*,#80965,.T.); +#91477 = ORIENTED_EDGE('',*,*,#91167,.T.); +#91478 = ORIENTED_EDGE('',*,*,#91338,.F.); +#91479 = ORIENTED_EDGE('',*,*,#91480,.F.); +#91480 = EDGE_CURVE('',#91431,#91331,#91481,.T.); +#91481 = LINE('',#91482,#91483); +#91482 = CARTESIAN_POINT('',(3.47,-5.2,5.E-02)); +#91483 = VECTOR('',#91484,1.); +#91484 = DIRECTION('',(-0.,-1.,-0.)); +#91485 = CYLINDRICAL_SURFACE('',#91486,0.7); +#91486 = AXIS2_PLACEMENT_3D('',#91487,#91488,#91489); +#91487 = CARTESIAN_POINT('',(3.47,5.199738091155,0.75)); +#91488 = DIRECTION('',(0.,-1.,0.)); +#91489 = DIRECTION('',(0.,0.,-1.)); +#91490 = ADVANCED_FACE('',(#91491),#91503,.T.); +#91491 = FACE_BOUND('',#91492,.T.); +#91492 = EDGE_LOOP('',(#91493,#91494,#91501,#91502)); +#91493 = ORIENTED_EDGE('',*,*,#79550,.F.); +#91494 = ORIENTED_EDGE('',*,*,#91495,.T.); +#91495 = EDGE_CURVE('',#79418,#79416,#91496,.T.); +#91496 = CIRCLE('',#91497,0.25); +#91497 = AXIS2_PLACEMENT_3D('',#91498,#91499,#91500); +#91498 = CARTESIAN_POINT('',(2.89,-3.65,-0.45)); +#91499 = DIRECTION('',(0.,-0.,1.)); +#91500 = DIRECTION('',(-1.,0.,0.)); +#91501 = ORIENTED_EDGE('',*,*,#79567,.T.); +#91502 = ORIENTED_EDGE('',*,*,#91458,.T.); +#91503 = CYLINDRICAL_SURFACE('',#91504,0.25); +#91504 = AXIS2_PLACEMENT_3D('',#91505,#91506,#91507); +#91505 = CARTESIAN_POINT('',(2.89,-3.65,-0.6)); +#91506 = DIRECTION('',(-0.,-0.,1.)); +#91507 = DIRECTION('',(1.,0.,0.)); +#91508 = ADVANCED_FACE('',(#91509),#91519,.T.); +#91509 = FACE_BOUND('',#91510,.T.); +#91510 = EDGE_LOOP('',(#91511,#91512)); +#91511 = ORIENTED_EDGE('',*,*,#79435,.T.); +#91512 = ORIENTED_EDGE('',*,*,#91513,.T.); +#91513 = EDGE_CURVE('',#79427,#79436,#91514,.T.); +#91514 = CIRCLE('',#91515,1.E-01); +#91515 = AXIS2_PLACEMENT_3D('',#91516,#91517,#91518); +#91516 = CARTESIAN_POINT('',(2.89,-3.65,-0.6)); +#91517 = DIRECTION('',(0.,0.,-1.)); +#91518 = DIRECTION('',(-1.,0.,0.)); +#91519 = PLANE('',#91520); +#91520 = AXIS2_PLACEMENT_3D('',#91521,#91522,#91523); +#91521 = CARTESIAN_POINT('',(2.89,-3.65,-0.6)); +#91522 = DIRECTION('',(0.,0.,-1.)); +#91523 = DIRECTION('',(-1.,0.,-0.)); +#91524 = ADVANCED_FACE('',(#91525),#91537,.T.); +#91525 = FACE_BOUND('',#91526,.T.); +#91526 = EDGE_LOOP('',(#91527,#91528,#91535,#91536)); +#91527 = ORIENTED_EDGE('',*,*,#79518,.F.); +#91528 = ORIENTED_EDGE('',*,*,#91529,.T.); +#91529 = EDGE_CURVE('',#79469,#79467,#91530,.T.); +#91530 = CIRCLE('',#91531,0.25); +#91531 = AXIS2_PLACEMENT_3D('',#91532,#91533,#91534); +#91532 = CARTESIAN_POINT('',(-2.89,-3.65,-0.45)); +#91533 = DIRECTION('',(0.,-0.,1.)); +#91534 = DIRECTION('',(-1.,0.,0.)); +#91535 = ORIENTED_EDGE('',*,*,#79535,.T.); +#91536 = ORIENTED_EDGE('',*,*,#91448,.T.); +#91537 = CYLINDRICAL_SURFACE('',#91538,0.25); +#91538 = AXIS2_PLACEMENT_3D('',#91539,#91540,#91541); +#91539 = CARTESIAN_POINT('',(-2.89,-3.65,-0.6)); +#91540 = DIRECTION('',(-0.,-0.,1.)); +#91541 = DIRECTION('',(1.,0.,0.)); +#91542 = ADVANCED_FACE('',(#91543),#91553,.T.); +#91543 = FACE_BOUND('',#91544,.T.); +#91544 = EDGE_LOOP('',(#91545,#91546)); +#91545 = ORIENTED_EDGE('',*,*,#79486,.T.); +#91546 = ORIENTED_EDGE('',*,*,#91547,.T.); +#91547 = EDGE_CURVE('',#79478,#79487,#91548,.T.); +#91548 = CIRCLE('',#91549,0.1); +#91549 = AXIS2_PLACEMENT_3D('',#91550,#91551,#91552); +#91550 = CARTESIAN_POINT('',(-2.89,-3.65,-0.6)); +#91551 = DIRECTION('',(0.,0.,-1.)); +#91552 = DIRECTION('',(-1.,0.,0.)); +#91553 = PLANE('',#91554); +#91554 = AXIS2_PLACEMENT_3D('',#91555,#91556,#91557); +#91555 = CARTESIAN_POINT('',(-2.89,-3.65,-0.6)); +#91556 = DIRECTION('',(0.,0.,-1.)); +#91557 = DIRECTION('',(-1.,0.,-0.)); +#91558 = ADVANCED_FACE('',(#91559),#91565,.T.); +#91559 = FACE_BOUND('',#91560,.T.); +#91560 = EDGE_LOOP('',(#91561,#91562,#91563,#91564)); +#91561 = ORIENTED_EDGE('',*,*,#79477,.F.); +#91562 = ORIENTED_EDGE('',*,*,#91529,.F.); +#91563 = ORIENTED_EDGE('',*,*,#79495,.T.); +#91564 = ORIENTED_EDGE('',*,*,#91547,.F.); +#91565 = SURFACE_OF_REVOLUTION('',#91566,#91574); +#91566 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#91567,#91568,#91569,#91570, + #91571,#91572,#91573),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#91567 = CARTESIAN_POINT('',(-3.14,-3.65,-0.45)); +#91568 = CARTESIAN_POINT('',(-3.14,-3.65,-0.48926990817)); +#91569 = CARTESIAN_POINT('',(-3.127665847097,-3.65,-0.528536475106)); +#91570 = CARTESIAN_POINT('',(-3.102978522446,-3.65,-0.562978522446)); +#91571 = CARTESIAN_POINT('',(-3.068536475106,-3.65,-0.587665847097)); +#91572 = CARTESIAN_POINT('',(-3.02926990817,-3.65,-0.6)); +#91573 = CARTESIAN_POINT('',(-2.99,-3.65,-0.6)); +#91574 = AXIS1_PLACEMENT('',#91575,#91576); +#91575 = CARTESIAN_POINT('',(-2.89,-3.65,-0.45)); +#91576 = DIRECTION('',(0.,0.,-1.)); +#91577 = ADVANCED_FACE('',(#91578),#91584,.T.); +#91578 = FACE_BOUND('',#91579,.T.); +#91579 = EDGE_LOOP('',(#91580,#91581,#91582,#91583)); +#91580 = ORIENTED_EDGE('',*,*,#79426,.F.); +#91581 = ORIENTED_EDGE('',*,*,#91495,.F.); +#91582 = ORIENTED_EDGE('',*,*,#79444,.T.); +#91583 = ORIENTED_EDGE('',*,*,#91513,.F.); +#91584 = SURFACE_OF_REVOLUTION('',#91585,#91593); +#91585 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#91586,#91587,#91588,#91589, + #91590,#91591,#91592),.UNSPECIFIED.,.F.,.F.,(7,7),(0.,1.570796326795 + ),.PIECEWISE_BEZIER_KNOTS.); +#91586 = CARTESIAN_POINT('',(2.64,-3.65,-0.45)); +#91587 = CARTESIAN_POINT('',(2.64,-3.65,-0.48926990817)); +#91588 = CARTESIAN_POINT('',(2.652334152903,-3.65,-0.528536475106)); +#91589 = CARTESIAN_POINT('',(2.677021477554,-3.65,-0.562978522446)); +#91590 = CARTESIAN_POINT('',(2.711463524894,-3.65,-0.587665847097)); +#91591 = CARTESIAN_POINT('',(2.75073009183,-3.65,-0.6)); +#91592 = CARTESIAN_POINT('',(2.79,-3.65,-0.6)); +#91593 = AXIS1_PLACEMENT('',#91594,#91595); +#91594 = CARTESIAN_POINT('',(2.89,-3.65,-0.45)); +#91595 = DIRECTION('',(0.,0.,-1.)); +#91596 = ADVANCED_FACE('',(#91597),#91608,.F.); +#91597 = FACE_BOUND('',#91598,.T.); +#91598 = EDGE_LOOP('',(#91599,#91600,#91606,#91607)); +#91599 = ORIENTED_EDGE('',*,*,#91413,.T.); +#91600 = ORIENTED_EDGE('',*,*,#91601,.F.); +#91601 = EDGE_CURVE('',#80560,#91406,#91602,.T.); +#91602 = LINE('',#91603,#91604); +#91603 = CARTESIAN_POINT('',(-3.47,-4.2,0.2)); +#91604 = VECTOR('',#91605,1.); +#91605 = DIRECTION('',(-0.,-0.,-1.)); +#91606 = ORIENTED_EDGE('',*,*,#80559,.F.); +#91607 = ORIENTED_EDGE('',*,*,#91239,.F.); +#91608 = PLANE('',#91609); +#91609 = AXIS2_PLACEMENT_3D('',#91610,#91611,#91612); +#91610 = CARTESIAN_POINT('',(-3.47,-5.2,0.2)); +#91611 = DIRECTION('',(-1.,0.,0.)); +#91612 = DIRECTION('',(0.,0.,1.)); +#91613 = ADVANCED_FACE('',(#91614),#91625,.F.); +#91614 = FACE_BOUND('',#91615,.T.); +#91615 = EDGE_LOOP('',(#91616,#91617,#91623,#91624)); +#91616 = ORIENTED_EDGE('',*,*,#80575,.F.); +#91617 = ORIENTED_EDGE('',*,*,#91618,.T.); +#91618 = EDGE_CURVE('',#80568,#91431,#91619,.T.); +#91619 = LINE('',#91620,#91621); +#91620 = CARTESIAN_POINT('',(3.47,-4.2,0.2)); +#91621 = VECTOR('',#91622,1.); +#91622 = DIRECTION('',(-0.,-0.,-1.)); +#91623 = ORIENTED_EDGE('',*,*,#91480,.T.); +#91624 = ORIENTED_EDGE('',*,*,#91330,.F.); +#91625 = PLANE('',#91626); +#91626 = AXIS2_PLACEMENT_3D('',#91627,#91628,#91629); +#91627 = CARTESIAN_POINT('',(3.47,-5.2,0.2)); +#91628 = DIRECTION('',(1.,0.,0.)); +#91629 = DIRECTION('',(0.,0.,-1.)); +#91630 = ADVANCED_FACE('',(#91631),#91637,.F.); +#91631 = FACE_BOUND('',#91632,.T.); +#91632 = EDGE_LOOP('',(#91633,#91634,#91635,#91636)); +#91633 = ORIENTED_EDGE('',*,*,#91430,.T.); +#91634 = ORIENTED_EDGE('',*,*,#91618,.F.); +#91635 = ORIENTED_EDGE('',*,*,#80567,.F.); +#91636 = ORIENTED_EDGE('',*,*,#91601,.T.); +#91637 = PLANE('',#91638); +#91638 = AXIS2_PLACEMENT_3D('',#91639,#91640,#91641); +#91639 = CARTESIAN_POINT('',(3.47,-4.2,0.2)); +#91640 = DIRECTION('',(0.,1.,-0.)); +#91641 = DIRECTION('',(0.,0.,1.)); +#91642 = ADVANCED_FACE('',(#91643),#91668,.T.); +#91643 = FACE_BOUND('',#91644,.T.); +#91644 = EDGE_LOOP('',(#91645,#91646,#91654,#91662)); +#91645 = ORIENTED_EDGE('',*,*,#91323,.F.); +#91646 = ORIENTED_EDGE('',*,*,#91647,.F.); +#91647 = EDGE_CURVE('',#91648,#80608,#91650,.T.); +#91648 = VERTEX_POINT('',#91649); +#91649 = CARTESIAN_POINT('',(3.025,-5.3,0.2)); +#91650 = LINE('',#91651,#91652); +#91651 = CARTESIAN_POINT('',(3.025,-5.3,0.2)); +#91652 = VECTOR('',#91653,1.); +#91653 = DIRECTION('',(0.,1.,0.)); +#91654 = ORIENTED_EDGE('',*,*,#91655,.F.); +#91655 = EDGE_CURVE('',#91656,#91648,#91658,.T.); +#91656 = VERTEX_POINT('',#91657); +#91657 = CARTESIAN_POINT('',(3.425,-5.3,0.2)); +#91658 = LINE('',#91659,#91660); +#91659 = CARTESIAN_POINT('',(3.425,-5.3,0.2)); +#91660 = VECTOR('',#91661,1.); +#91661 = DIRECTION('',(-1.,0.,0.)); +#91662 = ORIENTED_EDGE('',*,*,#91663,.F.); +#91663 = EDGE_CURVE('',#80584,#91656,#91664,.T.); +#91664 = LINE('',#91665,#91666); +#91665 = CARTESIAN_POINT('',(3.425,-5.3,0.2)); +#91666 = VECTOR('',#91667,1.); +#91667 = DIRECTION('',(-0.,-1.,-0.)); +#91668 = PLANE('',#91669); +#91669 = AXIS2_PLACEMENT_3D('',#91670,#91671,#91672); +#91670 = CARTESIAN_POINT('',(0.,0.,0.2)); +#91671 = DIRECTION('',(0.,-0.,1.)); +#91672 = DIRECTION('',(1.,0.,0.)); +#91673 = ADVANCED_FACE('',(#91674),#91701,.F.); +#91674 = FACE_BOUND('',#91675,.T.); +#91675 = EDGE_LOOP('',(#91676,#91677,#91686,#91694,#91700)); +#91676 = ORIENTED_EDGE('',*,*,#80607,.T.); +#91677 = ORIENTED_EDGE('',*,*,#91678,.T.); +#91678 = EDGE_CURVE('',#80600,#91679,#91681,.T.); +#91679 = VERTEX_POINT('',#91680); +#91680 = CARTESIAN_POINT('',(3.025,-4.45,-1.084202172486E-16)); +#91681 = CIRCLE('',#91682,0.2); +#91682 = AXIS2_PLACEMENT_3D('',#91683,#91684,#91685); +#91683 = CARTESIAN_POINT('',(3.025,-4.45,0.2)); +#91684 = DIRECTION('',(-1.,0.,-0.)); +#91685 = DIRECTION('',(0.,0.,-1.)); +#91686 = ORIENTED_EDGE('',*,*,#91687,.F.); +#91687 = EDGE_CURVE('',#91688,#91679,#91690,.T.); +#91688 = VERTEX_POINT('',#91689); +#91689 = CARTESIAN_POINT('',(3.025,-5.3,-1.084202172486E-16)); +#91690 = LINE('',#91691,#91692); +#91691 = CARTESIAN_POINT('',(3.025,-5.3,-1.084202172486E-16)); +#91692 = VECTOR('',#91693,1.); +#91693 = DIRECTION('',(0.,1.,0.)); +#91694 = ORIENTED_EDGE('',*,*,#91695,.T.); +#91695 = EDGE_CURVE('',#91688,#91648,#91696,.T.); +#91696 = LINE('',#91697,#91698); +#91697 = CARTESIAN_POINT('',(3.025,-5.3,-1.084202172486E-16)); +#91698 = VECTOR('',#91699,1.); +#91699 = DIRECTION('',(-0.,-0.,1.)); +#91700 = ORIENTED_EDGE('',*,*,#91647,.T.); +#91701 = PLANE('',#91702); +#91702 = AXIS2_PLACEMENT_3D('',#91703,#91704,#91705); +#91703 = CARTESIAN_POINT('',(3.025,-5.3,-1.084202172486E-16)); +#91704 = DIRECTION('',(1.,-0.,0.)); +#91705 = DIRECTION('',(0.,0.,-1.)); +#91706 = ADVANCED_FACE('',(#91707),#91734,.F.); +#91707 = FACE_BOUND('',#91708,.T.); +#91708 = EDGE_LOOP('',(#91709,#91719,#91726,#91727,#91728)); +#91709 = ORIENTED_EDGE('',*,*,#91710,.F.); +#91710 = EDGE_CURVE('',#91711,#91713,#91715,.T.); +#91711 = VERTEX_POINT('',#91712); +#91712 = CARTESIAN_POINT('',(3.425,-4.45,-1.084202172486E-16)); +#91713 = VERTEX_POINT('',#91714); +#91714 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91715 = LINE('',#91716,#91717); +#91716 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91717 = VECTOR('',#91718,1.); +#91718 = DIRECTION('',(-0.,-1.,-0.)); +#91719 = ORIENTED_EDGE('',*,*,#91720,.T.); +#91720 = EDGE_CURVE('',#91711,#80592,#91721,.T.); +#91721 = CIRCLE('',#91722,0.2); +#91722 = AXIS2_PLACEMENT_3D('',#91723,#91724,#91725); +#91723 = CARTESIAN_POINT('',(3.425,-4.45,0.2)); +#91724 = DIRECTION('',(1.,0.,-0.)); +#91725 = DIRECTION('',(0.,0.,1.)); +#91726 = ORIENTED_EDGE('',*,*,#80591,.T.); +#91727 = ORIENTED_EDGE('',*,*,#91663,.T.); +#91728 = ORIENTED_EDGE('',*,*,#91729,.F.); +#91729 = EDGE_CURVE('',#91713,#91656,#91730,.T.); +#91730 = LINE('',#91731,#91732); +#91731 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91732 = VECTOR('',#91733,1.); +#91733 = DIRECTION('',(-0.,-0.,1.)); +#91734 = PLANE('',#91735); +#91735 = AXIS2_PLACEMENT_3D('',#91736,#91737,#91738); +#91736 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91737 = DIRECTION('',(-1.,0.,0.)); +#91738 = DIRECTION('',(0.,0.,1.)); +#91739 = ADVANCED_FACE('',(#91740),#91751,.F.); +#91740 = FACE_BOUND('',#91741,.T.); +#91741 = EDGE_LOOP('',(#91742,#91743,#91744,#91750)); +#91742 = ORIENTED_EDGE('',*,*,#91655,.T.); +#91743 = ORIENTED_EDGE('',*,*,#91695,.F.); +#91744 = ORIENTED_EDGE('',*,*,#91745,.F.); +#91745 = EDGE_CURVE('',#91713,#91688,#91746,.T.); +#91746 = LINE('',#91747,#91748); +#91747 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91748 = VECTOR('',#91749,1.); +#91749 = DIRECTION('',(-1.,0.,0.)); +#91750 = ORIENTED_EDGE('',*,*,#91729,.T.); +#91751 = PLANE('',#91752); +#91752 = AXIS2_PLACEMENT_3D('',#91753,#91754,#91755); +#91753 = CARTESIAN_POINT('',(3.425,-5.3,-1.084202172486E-16)); +#91754 = DIRECTION('',(0.,1.,0.)); +#91755 = DIRECTION('',(0.,-0.,1.)); +#91756 = ADVANCED_FACE('',(#91757),#91768,.F.); +#91757 = FACE_BOUND('',#91758,.T.); +#91758 = EDGE_LOOP('',(#91759,#91760,#91766,#91767)); +#91759 = ORIENTED_EDGE('',*,*,#91687,.T.); +#91760 = ORIENTED_EDGE('',*,*,#91761,.T.); +#91761 = EDGE_CURVE('',#91679,#91711,#91762,.T.); +#91762 = LINE('',#91763,#91764); +#91763 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#91764 = VECTOR('',#91765,1.); +#91765 = DIRECTION('',(1.,0.,0.)); +#91766 = ORIENTED_EDGE('',*,*,#91710,.T.); +#91767 = ORIENTED_EDGE('',*,*,#91745,.T.); +#91768 = PLANE('',#91769); +#91769 = AXIS2_PLACEMENT_3D('',#91770,#91771,#91772); +#91770 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#91771 = DIRECTION('',(0.,-0.,1.)); +#91772 = DIRECTION('',(1.,0.,0.)); +#91773 = ADVANCED_FACE('',(#91774),#91799,.F.); +#91774 = FACE_BOUND('',#91775,.T.); +#91775 = EDGE_LOOP('',(#91776,#91784,#91785,#91793)); +#91776 = ORIENTED_EDGE('',*,*,#91777,.F.); +#91777 = EDGE_CURVE('',#80616,#91778,#91780,.T.); +#91778 = VERTEX_POINT('',#91779); +#91779 = CARTESIAN_POINT('',(2.65,-5.3,0.2)); +#91780 = LINE('',#91781,#91782); +#91781 = CARTESIAN_POINT('',(2.65,-5.3,0.2)); +#91782 = VECTOR('',#91783,1.); +#91783 = DIRECTION('',(-0.,-1.,-0.)); +#91784 = ORIENTED_EDGE('',*,*,#91316,.F.); +#91785 = ORIENTED_EDGE('',*,*,#91786,.F.); +#91786 = EDGE_CURVE('',#91787,#80640,#91789,.T.); +#91787 = VERTEX_POINT('',#91788); +#91788 = CARTESIAN_POINT('',(2.25,-5.3,0.2)); +#91789 = LINE('',#91790,#91791); +#91790 = CARTESIAN_POINT('',(2.25,-5.3,0.2)); +#91791 = VECTOR('',#91792,1.); +#91792 = DIRECTION('',(0.,1.,0.)); +#91793 = ORIENTED_EDGE('',*,*,#91794,.F.); +#91794 = EDGE_CURVE('',#91778,#91787,#91795,.T.); +#91795 = LINE('',#91796,#91797); +#91796 = CARTESIAN_POINT('',(2.25,-5.3,0.2)); +#91797 = VECTOR('',#91798,1.); +#91798 = DIRECTION('',(-1.,-0.,-0.)); +#91799 = PLANE('',#91800); +#91800 = AXIS2_PLACEMENT_3D('',#91801,#91802,#91803); +#91801 = CARTESIAN_POINT('',(0.,0.,0.2)); +#91802 = DIRECTION('',(0.,0.,-1.)); +#91803 = DIRECTION('',(-1.,0.,-0.)); +#91804 = ADVANCED_FACE('',(#91805),#91832,.F.); +#91805 = FACE_BOUND('',#91806,.T.); +#91806 = EDGE_LOOP('',(#91807,#91817,#91824,#91825,#91826)); +#91807 = ORIENTED_EDGE('',*,*,#91808,.F.); +#91808 = EDGE_CURVE('',#91809,#91811,#91813,.T.); +#91809 = VERTEX_POINT('',#91810); +#91810 = CARTESIAN_POINT('',(2.65,-4.45,-1.084202172486E-16)); +#91811 = VERTEX_POINT('',#91812); +#91812 = CARTESIAN_POINT('',(2.65,-5.3,-1.084202172486E-16)); +#91813 = LINE('',#91814,#91815); +#91814 = CARTESIAN_POINT('',(2.65,-5.3,-1.084202172486E-16)); +#91815 = VECTOR('',#91816,1.); +#91816 = DIRECTION('',(-0.,-1.,-0.)); +#91817 = ORIENTED_EDGE('',*,*,#91818,.T.); +#91818 = EDGE_CURVE('',#91809,#80624,#91819,.T.); +#91819 = CIRCLE('',#91820,0.2); +#91820 = AXIS2_PLACEMENT_3D('',#91821,#91822,#91823); +#91821 = CARTESIAN_POINT('',(2.65,-4.45,0.2)); +#91822 = DIRECTION('',(1.,0.,-0.)); +#91823 = DIRECTION('',(0.,0.,1.)); +#91824 = ORIENTED_EDGE('',*,*,#80623,.T.); +#91825 = ORIENTED_EDGE('',*,*,#91777,.T.); +#91826 = ORIENTED_EDGE('',*,*,#91827,.F.); +#91827 = EDGE_CURVE('',#91811,#91778,#91828,.T.); +#91828 = LINE('',#91829,#91830); +#91829 = CARTESIAN_POINT('',(2.65,-5.3,-1.084202172486E-16)); +#91830 = VECTOR('',#91831,1.); +#91831 = DIRECTION('',(-0.,-0.,1.)); +#91832 = PLANE('',#91833); +#91833 = AXIS2_PLACEMENT_3D('',#91834,#91835,#91836); +#91834 = CARTESIAN_POINT('',(2.65,-5.3,-1.084202172486E-16)); +#91835 = DIRECTION('',(-1.,0.,0.)); +#91836 = DIRECTION('',(0.,0.,1.)); +#91837 = ADVANCED_FACE('',(#91838),#91856,.F.); +#91838 = FACE_BOUND('',#91839,.T.); +#91839 = EDGE_LOOP('',(#91840,#91841,#91849,#91855)); +#91840 = ORIENTED_EDGE('',*,*,#91794,.T.); +#91841 = ORIENTED_EDGE('',*,*,#91842,.F.); +#91842 = EDGE_CURVE('',#91843,#91787,#91845,.T.); +#91843 = VERTEX_POINT('',#91844); +#91844 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91845 = LINE('',#91846,#91847); +#91846 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91847 = VECTOR('',#91848,1.); +#91848 = DIRECTION('',(-0.,-0.,1.)); +#91849 = ORIENTED_EDGE('',*,*,#91850,.F.); +#91850 = EDGE_CURVE('',#91811,#91843,#91851,.T.); +#91851 = LINE('',#91852,#91853); +#91852 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91853 = VECTOR('',#91854,1.); +#91854 = DIRECTION('',(-1.,-0.,-0.)); +#91855 = ORIENTED_EDGE('',*,*,#91827,.T.); +#91856 = PLANE('',#91857); +#91857 = AXIS2_PLACEMENT_3D('',#91858,#91859,#91860); +#91858 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91859 = DIRECTION('',(-0.,1.,0.)); +#91860 = DIRECTION('',(0.,0.,1.)); +#91861 = ADVANCED_FACE('',(#91862),#91882,.F.); +#91862 = FACE_BOUND('',#91863,.T.); +#91863 = EDGE_LOOP('',(#91864,#91865,#91874,#91880,#91881)); +#91864 = ORIENTED_EDGE('',*,*,#80639,.T.); +#91865 = ORIENTED_EDGE('',*,*,#91866,.T.); +#91866 = EDGE_CURVE('',#80632,#91867,#91869,.T.); +#91867 = VERTEX_POINT('',#91868); +#91868 = CARTESIAN_POINT('',(2.25,-4.45,-1.084202172486E-16)); +#91869 = CIRCLE('',#91870,0.2); +#91870 = AXIS2_PLACEMENT_3D('',#91871,#91872,#91873); +#91871 = CARTESIAN_POINT('',(2.25,-4.45,0.2)); +#91872 = DIRECTION('',(-1.,0.,-0.)); +#91873 = DIRECTION('',(0.,0.,-1.)); +#91874 = ORIENTED_EDGE('',*,*,#91875,.F.); +#91875 = EDGE_CURVE('',#91843,#91867,#91876,.T.); +#91876 = LINE('',#91877,#91878); +#91877 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91878 = VECTOR('',#91879,1.); +#91879 = DIRECTION('',(0.,1.,0.)); +#91880 = ORIENTED_EDGE('',*,*,#91842,.T.); +#91881 = ORIENTED_EDGE('',*,*,#91786,.T.); +#91882 = PLANE('',#91883); +#91883 = AXIS2_PLACEMENT_3D('',#91884,#91885,#91886); +#91884 = CARTESIAN_POINT('',(2.25,-5.3,-1.084202172486E-16)); +#91885 = DIRECTION('',(1.,-0.,0.)); +#91886 = DIRECTION('',(0.,0.,-1.)); +#91887 = ADVANCED_FACE('',(#91888),#91899,.T.); +#91888 = FACE_BOUND('',#91889,.T.); +#91889 = EDGE_LOOP('',(#91890,#91891,#91897,#91898)); +#91890 = ORIENTED_EDGE('',*,*,#91875,.T.); +#91891 = ORIENTED_EDGE('',*,*,#91892,.T.); +#91892 = EDGE_CURVE('',#91867,#91809,#91893,.T.); +#91893 = LINE('',#91894,#91895); +#91894 = CARTESIAN_POINT('',(2.65,-4.45,-1.084202172486E-16)); +#91895 = VECTOR('',#91896,1.); +#91896 = DIRECTION('',(1.,0.,0.)); +#91897 = ORIENTED_EDGE('',*,*,#91808,.T.); +#91898 = ORIENTED_EDGE('',*,*,#91850,.T.); +#91899 = PLANE('',#91900); +#91900 = AXIS2_PLACEMENT_3D('',#91901,#91902,#91903); +#91901 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#91902 = DIRECTION('',(0.,0.,-1.)); +#91903 = DIRECTION('',(-1.,0.,-0.)); +#91904 = ADVANCED_FACE('',(#91905),#91930,.T.); +#91905 = FACE_BOUND('',#91906,.T.); +#91906 = EDGE_LOOP('',(#91907,#91908,#91916,#91924)); +#91907 = ORIENTED_EDGE('',*,*,#91288,.F.); +#91908 = ORIENTED_EDGE('',*,*,#91909,.F.); +#91909 = EDGE_CURVE('',#91910,#80768,#91912,.T.); +#91910 = VERTEX_POINT('',#91911); +#91911 = CARTESIAN_POINT('',(0.15,-5.3,0.2)); +#91912 = LINE('',#91913,#91914); +#91913 = CARTESIAN_POINT('',(0.15,-4.25,0.2)); +#91914 = VECTOR('',#91915,1.); +#91915 = DIRECTION('',(5.162867488026E-17,1.,-0.)); +#91916 = ORIENTED_EDGE('',*,*,#91917,.F.); +#91917 = EDGE_CURVE('',#91918,#91910,#91920,.T.); +#91918 = VERTEX_POINT('',#91919); +#91919 = CARTESIAN_POINT('',(0.35,-5.3,0.2)); +#91920 = LINE('',#91921,#91922); +#91921 = CARTESIAN_POINT('',(0.15,-5.3,0.2)); +#91922 = VECTOR('',#91923,1.); +#91923 = DIRECTION('',(-1.,-0.,-0.)); +#91924 = ORIENTED_EDGE('',*,*,#91925,.F.); +#91925 = EDGE_CURVE('',#80744,#91918,#91926,.T.); +#91926 = LINE('',#91927,#91928); +#91927 = CARTESIAN_POINT('',(0.35,-4.25,0.2)); +#91928 = VECTOR('',#91929,1.); +#91929 = DIRECTION('',(0.,-1.,0.)); +#91930 = PLANE('',#91931); +#91931 = AXIS2_PLACEMENT_3D('',#91932,#91933,#91934); +#91932 = CARTESIAN_POINT('',(0.,0.,0.2)); +#91933 = DIRECTION('',(-0.,0.,1.)); +#91934 = DIRECTION('',(1.,0.,0.)); +#91935 = ADVANCED_FACE('',(#91936),#91963,.F.); +#91936 = FACE_BOUND('',#91937,.T.); +#91937 = EDGE_LOOP('',(#91938,#91948,#91955,#91956,#91957)); +#91938 = ORIENTED_EDGE('',*,*,#91939,.F.); +#91939 = EDGE_CURVE('',#91940,#91942,#91944,.T.); +#91940 = VERTEX_POINT('',#91941); +#91941 = CARTESIAN_POINT('',(0.35,-4.45,-1.084202172486E-16)); +#91942 = VERTEX_POINT('',#91943); +#91943 = CARTESIAN_POINT('',(0.35,-5.3,-1.084202172486E-16)); +#91944 = LINE('',#91945,#91946); +#91945 = CARTESIAN_POINT('',(0.35,-4.25,-1.084202172486E-16)); +#91946 = VECTOR('',#91947,1.); +#91947 = DIRECTION('',(0.,-1.,0.)); +#91948 = ORIENTED_EDGE('',*,*,#91949,.T.); +#91949 = EDGE_CURVE('',#91940,#80752,#91950,.T.); +#91950 = CIRCLE('',#91951,0.2); +#91951 = AXIS2_PLACEMENT_3D('',#91952,#91953,#91954); +#91952 = CARTESIAN_POINT('',(0.35,-4.45,0.2)); +#91953 = DIRECTION('',(1.,0.,-0.)); +#91954 = DIRECTION('',(0.,0.,1.)); +#91955 = ORIENTED_EDGE('',*,*,#80751,.T.); +#91956 = ORIENTED_EDGE('',*,*,#91925,.T.); +#91957 = ORIENTED_EDGE('',*,*,#91958,.F.); +#91958 = EDGE_CURVE('',#91942,#91918,#91959,.T.); +#91959 = LINE('',#91960,#91961); +#91960 = CARTESIAN_POINT('',(0.35,-5.3,-1.084202172486E-16)); +#91961 = VECTOR('',#91962,1.); +#91962 = DIRECTION('',(-0.,-0.,1.)); +#91963 = PLANE('',#91964); +#91964 = AXIS2_PLACEMENT_3D('',#91965,#91966,#91967); +#91965 = CARTESIAN_POINT('',(0.35,-4.25,-1.084202172486E-16)); +#91966 = DIRECTION('',(-1.,0.,-0.)); +#91967 = DIRECTION('',(0.,0.,1.)); +#91968 = ADVANCED_FACE('',(#91969),#91987,.F.); +#91969 = FACE_BOUND('',#91970,.T.); +#91970 = EDGE_LOOP('',(#91971,#91972,#91980,#91986)); +#91971 = ORIENTED_EDGE('',*,*,#91917,.T.); +#91972 = ORIENTED_EDGE('',*,*,#91973,.F.); +#91973 = EDGE_CURVE('',#91974,#91910,#91976,.T.); +#91974 = VERTEX_POINT('',#91975); +#91975 = CARTESIAN_POINT('',(0.15,-5.3,-1.084202172486E-16)); +#91976 = LINE('',#91977,#91978); +#91977 = CARTESIAN_POINT('',(0.15,-5.3,-1.084202172486E-16)); +#91978 = VECTOR('',#91979,1.); +#91979 = DIRECTION('',(-0.,-0.,1.)); +#91980 = ORIENTED_EDGE('',*,*,#91981,.F.); +#91981 = EDGE_CURVE('',#91942,#91974,#91982,.T.); +#91982 = LINE('',#91983,#91984); +#91983 = CARTESIAN_POINT('',(0.15,-5.3,-1.084202172486E-16)); +#91984 = VECTOR('',#91985,1.); +#91985 = DIRECTION('',(-1.,-0.,-0.)); +#91986 = ORIENTED_EDGE('',*,*,#91958,.T.); +#91987 = PLANE('',#91988); +#91988 = AXIS2_PLACEMENT_3D('',#91989,#91990,#91991); +#91989 = CARTESIAN_POINT('',(0.15,-5.3,-1.084202172486E-16)); +#91990 = DIRECTION('',(-0.,1.,0.)); +#91991 = DIRECTION('',(0.,0.,1.)); +#91992 = ADVANCED_FACE('',(#91993),#92013,.F.); +#91993 = FACE_BOUND('',#91994,.T.); +#91994 = EDGE_LOOP('',(#91995,#91996,#92005,#92011,#92012)); +#91995 = ORIENTED_EDGE('',*,*,#80767,.T.); +#91996 = ORIENTED_EDGE('',*,*,#91997,.T.); +#91997 = EDGE_CURVE('',#80760,#91998,#92000,.T.); +#91998 = VERTEX_POINT('',#91999); +#91999 = CARTESIAN_POINT('',(0.15,-4.45,-1.084202172486E-16)); +#92000 = CIRCLE('',#92001,0.2); +#92001 = AXIS2_PLACEMENT_3D('',#92002,#92003,#92004); +#92002 = CARTESIAN_POINT('',(0.15,-4.45,0.2)); +#92003 = DIRECTION('',(-1.,5.162867488026E-17,0.)); +#92004 = DIRECTION('',(5.162867488026E-17,1.,0.)); +#92005 = ORIENTED_EDGE('',*,*,#92006,.F.); +#92006 = EDGE_CURVE('',#91974,#91998,#92007,.T.); +#92007 = LINE('',#92008,#92009); +#92008 = CARTESIAN_POINT('',(0.15,-4.25,-1.084202172486E-16)); +#92009 = VECTOR('',#92010,1.); +#92010 = DIRECTION('',(5.162867488026E-17,1.,-0.)); +#92011 = ORIENTED_EDGE('',*,*,#91973,.T.); +#92012 = ORIENTED_EDGE('',*,*,#91909,.T.); +#92013 = PLANE('',#92014); +#92014 = AXIS2_PLACEMENT_3D('',#92015,#92016,#92017); +#92015 = CARTESIAN_POINT('',(0.15,-4.25,-1.084202172486E-16)); +#92016 = DIRECTION('',(1.,-5.162867488026E-17,0.)); +#92017 = DIRECTION('',(5.162867488026E-17,1.,0.)); +#92018 = ADVANCED_FACE('',(#92019),#92030,.F.); +#92019 = FACE_BOUND('',#92020,.T.); +#92020 = EDGE_LOOP('',(#92021,#92022,#92028,#92029)); +#92021 = ORIENTED_EDGE('',*,*,#92006,.T.); +#92022 = ORIENTED_EDGE('',*,*,#92023,.T.); +#92023 = EDGE_CURVE('',#91998,#91940,#92024,.T.); +#92024 = LINE('',#92025,#92026); +#92025 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#92026 = VECTOR('',#92027,1.); +#92027 = DIRECTION('',(1.,0.,0.)); +#92028 = ORIENTED_EDGE('',*,*,#91939,.T.); +#92029 = ORIENTED_EDGE('',*,*,#91981,.T.); +#92030 = PLANE('',#92031); +#92031 = AXIS2_PLACEMENT_3D('',#92032,#92033,#92034); +#92032 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92033 = DIRECTION('',(-0.,0.,1.)); +#92034 = DIRECTION('',(1.,0.,0.)); +#92035 = ADVANCED_FACE('',(#92036),#92061,.T.); +#92036 = FACE_BOUND('',#92037,.T.); +#92037 = EDGE_LOOP('',(#92038,#92039,#92047,#92055)); +#92038 = ORIENTED_EDGE('',*,*,#91295,.F.); +#92039 = ORIENTED_EDGE('',*,*,#92040,.F.); +#92040 = EDGE_CURVE('',#92041,#80736,#92043,.T.); +#92041 = VERTEX_POINT('',#92042); +#92042 = CARTESIAN_POINT('',(0.65,-5.3,0.2)); +#92043 = LINE('',#92044,#92045); +#92044 = CARTESIAN_POINT('',(0.65,-4.25,0.2)); +#92045 = VECTOR('',#92046,1.); +#92046 = DIRECTION('',(-1.032573497605E-16,1.,-0.)); +#92047 = ORIENTED_EDGE('',*,*,#92048,.F.); +#92048 = EDGE_CURVE('',#92049,#92041,#92051,.T.); +#92049 = VERTEX_POINT('',#92050); +#92050 = CARTESIAN_POINT('',(0.85,-5.3,0.2)); +#92051 = LINE('',#92052,#92053); +#92052 = CARTESIAN_POINT('',(0.65,-5.3,0.2)); +#92053 = VECTOR('',#92054,1.); +#92054 = DIRECTION('',(-1.,-0.,-0.)); +#92055 = ORIENTED_EDGE('',*,*,#92056,.F.); +#92056 = EDGE_CURVE('',#80712,#92049,#92057,.T.); +#92057 = LINE('',#92058,#92059); +#92058 = CARTESIAN_POINT('',(0.85,-4.25,0.2)); +#92059 = VECTOR('',#92060,1.); +#92060 = DIRECTION('',(0.,-1.,0.)); +#92061 = PLANE('',#92062); +#92062 = AXIS2_PLACEMENT_3D('',#92063,#92064,#92065); +#92063 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92064 = DIRECTION('',(-0.,0.,1.)); +#92065 = DIRECTION('',(1.,0.,0.)); +#92066 = ADVANCED_FACE('',(#92067),#92094,.F.); +#92067 = FACE_BOUND('',#92068,.T.); +#92068 = EDGE_LOOP('',(#92069,#92079,#92086,#92087,#92088)); +#92069 = ORIENTED_EDGE('',*,*,#92070,.F.); +#92070 = EDGE_CURVE('',#92071,#92073,#92075,.T.); +#92071 = VERTEX_POINT('',#92072); +#92072 = CARTESIAN_POINT('',(0.85,-4.45,-1.084202172486E-16)); +#92073 = VERTEX_POINT('',#92074); +#92074 = CARTESIAN_POINT('',(0.85,-5.3,-1.084202172486E-16)); +#92075 = LINE('',#92076,#92077); +#92076 = CARTESIAN_POINT('',(0.85,-4.25,-1.084202172486E-16)); +#92077 = VECTOR('',#92078,1.); +#92078 = DIRECTION('',(0.,-1.,0.)); +#92079 = ORIENTED_EDGE('',*,*,#92080,.T.); +#92080 = EDGE_CURVE('',#92071,#80720,#92081,.T.); +#92081 = CIRCLE('',#92082,0.2); +#92082 = AXIS2_PLACEMENT_3D('',#92083,#92084,#92085); +#92083 = CARTESIAN_POINT('',(0.85,-4.45,0.2)); +#92084 = DIRECTION('',(1.,0.,-0.)); +#92085 = DIRECTION('',(0.,0.,1.)); +#92086 = ORIENTED_EDGE('',*,*,#80719,.T.); +#92087 = ORIENTED_EDGE('',*,*,#92056,.T.); +#92088 = ORIENTED_EDGE('',*,*,#92089,.F.); +#92089 = EDGE_CURVE('',#92073,#92049,#92090,.T.); +#92090 = LINE('',#92091,#92092); +#92091 = CARTESIAN_POINT('',(0.85,-5.3,-1.084202172486E-16)); +#92092 = VECTOR('',#92093,1.); +#92093 = DIRECTION('',(-0.,-0.,1.)); +#92094 = PLANE('',#92095); +#92095 = AXIS2_PLACEMENT_3D('',#92096,#92097,#92098); +#92096 = CARTESIAN_POINT('',(0.85,-4.25,-1.084202172486E-16)); +#92097 = DIRECTION('',(-1.,0.,-0.)); +#92098 = DIRECTION('',(0.,0.,1.)); +#92099 = ADVANCED_FACE('',(#92100),#92118,.F.); +#92100 = FACE_BOUND('',#92101,.T.); +#92101 = EDGE_LOOP('',(#92102,#92103,#92111,#92117)); +#92102 = ORIENTED_EDGE('',*,*,#92048,.T.); +#92103 = ORIENTED_EDGE('',*,*,#92104,.F.); +#92104 = EDGE_CURVE('',#92105,#92041,#92107,.T.); +#92105 = VERTEX_POINT('',#92106); +#92106 = CARTESIAN_POINT('',(0.65,-5.3,-1.084202172486E-16)); +#92107 = LINE('',#92108,#92109); +#92108 = CARTESIAN_POINT('',(0.65,-5.3,-1.084202172486E-16)); +#92109 = VECTOR('',#92110,1.); +#92110 = DIRECTION('',(-0.,-0.,1.)); +#92111 = ORIENTED_EDGE('',*,*,#92112,.F.); +#92112 = EDGE_CURVE('',#92073,#92105,#92113,.T.); +#92113 = LINE('',#92114,#92115); +#92114 = CARTESIAN_POINT('',(0.65,-5.3,-1.084202172486E-16)); +#92115 = VECTOR('',#92116,1.); +#92116 = DIRECTION('',(-1.,-0.,-0.)); +#92117 = ORIENTED_EDGE('',*,*,#92089,.T.); +#92118 = PLANE('',#92119); +#92119 = AXIS2_PLACEMENT_3D('',#92120,#92121,#92122); +#92120 = CARTESIAN_POINT('',(0.65,-5.3,-1.084202172486E-16)); +#92121 = DIRECTION('',(-0.,1.,0.)); +#92122 = DIRECTION('',(0.,0.,1.)); +#92123 = ADVANCED_FACE('',(#92124),#92144,.F.); +#92124 = FACE_BOUND('',#92125,.T.); +#92125 = EDGE_LOOP('',(#92126,#92127,#92136,#92142,#92143)); +#92126 = ORIENTED_EDGE('',*,*,#80735,.T.); +#92127 = ORIENTED_EDGE('',*,*,#92128,.T.); +#92128 = EDGE_CURVE('',#80728,#92129,#92131,.T.); +#92129 = VERTEX_POINT('',#92130); +#92130 = CARTESIAN_POINT('',(0.65,-4.45,-1.084202172486E-16)); +#92131 = CIRCLE('',#92132,0.2); +#92132 = AXIS2_PLACEMENT_3D('',#92133,#92134,#92135); +#92133 = CARTESIAN_POINT('',(0.65,-4.45,0.2)); +#92134 = DIRECTION('',(-1.,-1.032573497605E-16,-0.)); +#92135 = DIRECTION('',(-1.032573497605E-16,1.,0.)); +#92136 = ORIENTED_EDGE('',*,*,#92137,.F.); +#92137 = EDGE_CURVE('',#92105,#92129,#92138,.T.); +#92138 = LINE('',#92139,#92140); +#92139 = CARTESIAN_POINT('',(0.65,-4.25,-1.084202172486E-16)); +#92140 = VECTOR('',#92141,1.); +#92141 = DIRECTION('',(-1.032573497605E-16,1.,-0.)); +#92142 = ORIENTED_EDGE('',*,*,#92104,.T.); +#92143 = ORIENTED_EDGE('',*,*,#92040,.T.); +#92144 = PLANE('',#92145); +#92145 = AXIS2_PLACEMENT_3D('',#92146,#92147,#92148); +#92146 = CARTESIAN_POINT('',(0.65,-4.25,-1.084202172486E-16)); +#92147 = DIRECTION('',(1.,1.032573497605E-16,0.)); +#92148 = DIRECTION('',(-1.032573497605E-16,1.,0.)); +#92149 = ADVANCED_FACE('',(#92150),#92161,.F.); +#92150 = FACE_BOUND('',#92151,.T.); +#92151 = EDGE_LOOP('',(#92152,#92153,#92159,#92160)); +#92152 = ORIENTED_EDGE('',*,*,#92137,.T.); +#92153 = ORIENTED_EDGE('',*,*,#92154,.T.); +#92154 = EDGE_CURVE('',#92129,#92071,#92155,.T.); +#92155 = LINE('',#92156,#92157); +#92156 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#92157 = VECTOR('',#92158,1.); +#92158 = DIRECTION('',(1.,0.,0.)); +#92159 = ORIENTED_EDGE('',*,*,#92070,.T.); +#92160 = ORIENTED_EDGE('',*,*,#92112,.T.); +#92161 = PLANE('',#92162); +#92162 = AXIS2_PLACEMENT_3D('',#92163,#92164,#92165); +#92163 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92164 = DIRECTION('',(-0.,0.,1.)); +#92165 = DIRECTION('',(1.,0.,0.)); +#92166 = ADVANCED_FACE('',(#92167),#92192,.T.); +#92167 = FACE_BOUND('',#92168,.T.); +#92168 = EDGE_LOOP('',(#92169,#92170,#92178,#92186)); +#92169 = ORIENTED_EDGE('',*,*,#91302,.F.); +#92170 = ORIENTED_EDGE('',*,*,#92171,.F.); +#92171 = EDGE_CURVE('',#92172,#80704,#92174,.T.); +#92172 = VERTEX_POINT('',#92173); +#92173 = CARTESIAN_POINT('',(1.15,-5.3,0.2)); +#92174 = LINE('',#92175,#92176); +#92175 = CARTESIAN_POINT('',(1.15,-4.25,0.2)); +#92176 = VECTOR('',#92177,1.); +#92177 = DIRECTION('',(-2.065146995211E-16,1.,-0.)); +#92178 = ORIENTED_EDGE('',*,*,#92179,.F.); +#92179 = EDGE_CURVE('',#92180,#92172,#92182,.T.); +#92180 = VERTEX_POINT('',#92181); +#92181 = CARTESIAN_POINT('',(1.35,-5.3,0.2)); +#92182 = LINE('',#92183,#92184); +#92183 = CARTESIAN_POINT('',(1.15,-5.3,0.2)); +#92184 = VECTOR('',#92185,1.); +#92185 = DIRECTION('',(-1.,-0.,-0.)); +#92186 = ORIENTED_EDGE('',*,*,#92187,.F.); +#92187 = EDGE_CURVE('',#80680,#92180,#92188,.T.); +#92188 = LINE('',#92189,#92190); +#92189 = CARTESIAN_POINT('',(1.35,-4.25,0.2)); +#92190 = VECTOR('',#92191,1.); +#92191 = DIRECTION('',(2.065146995211E-16,-1.,0.)); +#92192 = PLANE('',#92193); +#92193 = AXIS2_PLACEMENT_3D('',#92194,#92195,#92196); +#92194 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92195 = DIRECTION('',(-0.,0.,1.)); +#92196 = DIRECTION('',(1.,0.,0.)); +#92197 = ADVANCED_FACE('',(#92198),#92225,.F.); +#92198 = FACE_BOUND('',#92199,.T.); +#92199 = EDGE_LOOP('',(#92200,#92210,#92217,#92218,#92219)); +#92200 = ORIENTED_EDGE('',*,*,#92201,.F.); +#92201 = EDGE_CURVE('',#92202,#92204,#92206,.T.); +#92202 = VERTEX_POINT('',#92203); +#92203 = CARTESIAN_POINT('',(1.35,-4.45,-1.084202172486E-16)); +#92204 = VERTEX_POINT('',#92205); +#92205 = CARTESIAN_POINT('',(1.35,-5.3,-1.084202172486E-16)); +#92206 = LINE('',#92207,#92208); +#92207 = CARTESIAN_POINT('',(1.35,-4.25,-1.084202172486E-16)); +#92208 = VECTOR('',#92209,1.); +#92209 = DIRECTION('',(2.065146995211E-16,-1.,0.)); +#92210 = ORIENTED_EDGE('',*,*,#92211,.T.); +#92211 = EDGE_CURVE('',#92202,#80688,#92212,.T.); +#92212 = CIRCLE('',#92213,0.2); +#92213 = AXIS2_PLACEMENT_3D('',#92214,#92215,#92216); +#92214 = CARTESIAN_POINT('',(1.35,-4.45,0.2)); +#92215 = DIRECTION('',(1.,2.065146995211E-16,0.)); +#92216 = DIRECTION('',(2.065146995211E-16,-1.,0.)); +#92217 = ORIENTED_EDGE('',*,*,#80687,.T.); +#92218 = ORIENTED_EDGE('',*,*,#92187,.T.); +#92219 = ORIENTED_EDGE('',*,*,#92220,.F.); +#92220 = EDGE_CURVE('',#92204,#92180,#92221,.T.); +#92221 = LINE('',#92222,#92223); +#92222 = CARTESIAN_POINT('',(1.35,-5.3,-1.084202172486E-16)); +#92223 = VECTOR('',#92224,1.); +#92224 = DIRECTION('',(-0.,-0.,1.)); +#92225 = PLANE('',#92226); +#92226 = AXIS2_PLACEMENT_3D('',#92227,#92228,#92229); +#92227 = CARTESIAN_POINT('',(1.35,-4.25,-1.084202172486E-16)); +#92228 = DIRECTION('',(-1.,-2.065146995211E-16,0.)); +#92229 = DIRECTION('',(2.065146995211E-16,-1.,0.)); +#92230 = ADVANCED_FACE('',(#92231),#92249,.F.); +#92231 = FACE_BOUND('',#92232,.T.); +#92232 = EDGE_LOOP('',(#92233,#92234,#92242,#92248)); +#92233 = ORIENTED_EDGE('',*,*,#92179,.T.); +#92234 = ORIENTED_EDGE('',*,*,#92235,.F.); +#92235 = EDGE_CURVE('',#92236,#92172,#92238,.T.); +#92236 = VERTEX_POINT('',#92237); +#92237 = CARTESIAN_POINT('',(1.15,-5.3,-1.084202172486E-16)); +#92238 = LINE('',#92239,#92240); +#92239 = CARTESIAN_POINT('',(1.15,-5.3,-1.084202172486E-16)); +#92240 = VECTOR('',#92241,1.); +#92241 = DIRECTION('',(-0.,-0.,1.)); +#92242 = ORIENTED_EDGE('',*,*,#92243,.F.); +#92243 = EDGE_CURVE('',#92204,#92236,#92244,.T.); +#92244 = LINE('',#92245,#92246); +#92245 = CARTESIAN_POINT('',(1.15,-5.3,-1.084202172486E-16)); +#92246 = VECTOR('',#92247,1.); +#92247 = DIRECTION('',(-1.,-0.,-0.)); +#92248 = ORIENTED_EDGE('',*,*,#92220,.T.); +#92249 = PLANE('',#92250); +#92250 = AXIS2_PLACEMENT_3D('',#92251,#92252,#92253); +#92251 = CARTESIAN_POINT('',(1.15,-5.3,-1.084202172486E-16)); +#92252 = DIRECTION('',(-0.,1.,0.)); +#92253 = DIRECTION('',(0.,0.,1.)); +#92254 = ADVANCED_FACE('',(#92255),#92275,.F.); +#92255 = FACE_BOUND('',#92256,.T.); +#92256 = EDGE_LOOP('',(#92257,#92258,#92267,#92273,#92274)); +#92257 = ORIENTED_EDGE('',*,*,#80703,.T.); +#92258 = ORIENTED_EDGE('',*,*,#92259,.T.); +#92259 = EDGE_CURVE('',#80696,#92260,#92262,.T.); +#92260 = VERTEX_POINT('',#92261); +#92261 = CARTESIAN_POINT('',(1.15,-4.45,-1.084202172486E-16)); +#92262 = CIRCLE('',#92263,0.2); +#92263 = AXIS2_PLACEMENT_3D('',#92264,#92265,#92266); +#92264 = CARTESIAN_POINT('',(1.15,-4.45,0.2)); +#92265 = DIRECTION('',(-1.,-2.065146995211E-16,-0.)); +#92266 = DIRECTION('',(-2.065146995211E-16,1.,0.)); +#92267 = ORIENTED_EDGE('',*,*,#92268,.F.); +#92268 = EDGE_CURVE('',#92236,#92260,#92269,.T.); +#92269 = LINE('',#92270,#92271); +#92270 = CARTESIAN_POINT('',(1.15,-4.25,-1.084202172486E-16)); +#92271 = VECTOR('',#92272,1.); +#92272 = DIRECTION('',(-2.065146995211E-16,1.,-0.)); +#92273 = ORIENTED_EDGE('',*,*,#92235,.T.); +#92274 = ORIENTED_EDGE('',*,*,#92171,.T.); +#92275 = PLANE('',#92276); +#92276 = AXIS2_PLACEMENT_3D('',#92277,#92278,#92279); +#92277 = CARTESIAN_POINT('',(1.15,-4.25,-1.084202172486E-16)); +#92278 = DIRECTION('',(1.,2.065146995211E-16,0.)); +#92279 = DIRECTION('',(-2.065146995211E-16,1.,0.)); +#92280 = ADVANCED_FACE('',(#92281),#92292,.F.); +#92281 = FACE_BOUND('',#92282,.T.); +#92282 = EDGE_LOOP('',(#92283,#92284,#92290,#92291)); +#92283 = ORIENTED_EDGE('',*,*,#92268,.T.); +#92284 = ORIENTED_EDGE('',*,*,#92285,.T.); +#92285 = EDGE_CURVE('',#92260,#92202,#92286,.T.); +#92286 = LINE('',#92287,#92288); +#92287 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#92288 = VECTOR('',#92289,1.); +#92289 = DIRECTION('',(1.,0.,0.)); +#92290 = ORIENTED_EDGE('',*,*,#92201,.T.); +#92291 = ORIENTED_EDGE('',*,*,#92243,.T.); +#92292 = PLANE('',#92293); +#92293 = AXIS2_PLACEMENT_3D('',#92294,#92295,#92296); +#92294 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92295 = DIRECTION('',(-0.,0.,1.)); +#92296 = DIRECTION('',(1.,0.,0.)); +#92297 = ADVANCED_FACE('',(#92298),#92323,.T.); +#92298 = FACE_BOUND('',#92299,.T.); +#92299 = EDGE_LOOP('',(#92300,#92301,#92309,#92317)); +#92300 = ORIENTED_EDGE('',*,*,#91309,.F.); +#92301 = ORIENTED_EDGE('',*,*,#92302,.F.); +#92302 = EDGE_CURVE('',#92303,#80672,#92305,.T.); +#92303 = VERTEX_POINT('',#92304); +#92304 = CARTESIAN_POINT('',(1.65,-5.3,0.2)); +#92305 = LINE('',#92306,#92307); +#92306 = CARTESIAN_POINT('',(1.65,-4.25,0.2)); +#92307 = VECTOR('',#92308,1.); +#92308 = DIRECTION('',(-4.130293990421E-16,1.,-0.)); +#92309 = ORIENTED_EDGE('',*,*,#92310,.F.); +#92310 = EDGE_CURVE('',#92311,#92303,#92313,.T.); +#92311 = VERTEX_POINT('',#92312); +#92312 = CARTESIAN_POINT('',(1.85,-5.3,0.2)); +#92313 = LINE('',#92314,#92315); +#92314 = CARTESIAN_POINT('',(1.65,-5.3,0.2)); +#92315 = VECTOR('',#92316,1.); +#92316 = DIRECTION('',(-1.,-0.,-0.)); +#92317 = ORIENTED_EDGE('',*,*,#92318,.F.); +#92318 = EDGE_CURVE('',#80648,#92311,#92319,.T.); +#92319 = LINE('',#92320,#92321); +#92320 = CARTESIAN_POINT('',(1.85,-4.25,0.2)); +#92321 = VECTOR('',#92322,1.); +#92322 = DIRECTION('',(4.130293990421E-16,-1.,0.)); +#92323 = PLANE('',#92324); +#92324 = AXIS2_PLACEMENT_3D('',#92325,#92326,#92327); +#92325 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92326 = DIRECTION('',(-0.,0.,1.)); +#92327 = DIRECTION('',(1.,0.,0.)); +#92328 = ADVANCED_FACE('',(#92329),#92356,.F.); +#92329 = FACE_BOUND('',#92330,.T.); +#92330 = EDGE_LOOP('',(#92331,#92341,#92348,#92349,#92350)); +#92331 = ORIENTED_EDGE('',*,*,#92332,.F.); +#92332 = EDGE_CURVE('',#92333,#92335,#92337,.T.); +#92333 = VERTEX_POINT('',#92334); +#92334 = CARTESIAN_POINT('',(1.85,-4.45,-1.084202172486E-16)); +#92335 = VERTEX_POINT('',#92336); +#92336 = CARTESIAN_POINT('',(1.85,-5.3,-1.084202172486E-16)); +#92337 = LINE('',#92338,#92339); +#92338 = CARTESIAN_POINT('',(1.85,-4.25,-1.084202172486E-16)); +#92339 = VECTOR('',#92340,1.); +#92340 = DIRECTION('',(4.130293990421E-16,-1.,0.)); +#92341 = ORIENTED_EDGE('',*,*,#92342,.T.); +#92342 = EDGE_CURVE('',#92333,#80656,#92343,.T.); +#92343 = CIRCLE('',#92344,0.2); +#92344 = AXIS2_PLACEMENT_3D('',#92345,#92346,#92347); +#92345 = CARTESIAN_POINT('',(1.85,-4.45,0.2)); +#92346 = DIRECTION('',(1.,4.130293990421E-16,0.)); +#92347 = DIRECTION('',(4.130293990421E-16,-1.,0.)); +#92348 = ORIENTED_EDGE('',*,*,#80655,.T.); +#92349 = ORIENTED_EDGE('',*,*,#92318,.T.); +#92350 = ORIENTED_EDGE('',*,*,#92351,.F.); +#92351 = EDGE_CURVE('',#92335,#92311,#92352,.T.); +#92352 = LINE('',#92353,#92354); +#92353 = CARTESIAN_POINT('',(1.85,-5.3,-1.084202172486E-16)); +#92354 = VECTOR('',#92355,1.); +#92355 = DIRECTION('',(-0.,-0.,1.)); +#92356 = PLANE('',#92357); +#92357 = AXIS2_PLACEMENT_3D('',#92358,#92359,#92360); +#92358 = CARTESIAN_POINT('',(1.85,-4.25,-1.084202172486E-16)); +#92359 = DIRECTION('',(-1.,-4.130293990421E-16,0.)); +#92360 = DIRECTION('',(4.130293990421E-16,-1.,0.)); +#92361 = ADVANCED_FACE('',(#92362),#92380,.F.); +#92362 = FACE_BOUND('',#92363,.T.); +#92363 = EDGE_LOOP('',(#92364,#92365,#92373,#92379)); +#92364 = ORIENTED_EDGE('',*,*,#92310,.T.); +#92365 = ORIENTED_EDGE('',*,*,#92366,.F.); +#92366 = EDGE_CURVE('',#92367,#92303,#92369,.T.); +#92367 = VERTEX_POINT('',#92368); +#92368 = CARTESIAN_POINT('',(1.65,-5.3,-1.084202172486E-16)); +#92369 = LINE('',#92370,#92371); +#92370 = CARTESIAN_POINT('',(1.65,-5.3,-1.084202172486E-16)); +#92371 = VECTOR('',#92372,1.); +#92372 = DIRECTION('',(-0.,-0.,1.)); +#92373 = ORIENTED_EDGE('',*,*,#92374,.F.); +#92374 = EDGE_CURVE('',#92335,#92367,#92375,.T.); +#92375 = LINE('',#92376,#92377); +#92376 = CARTESIAN_POINT('',(1.65,-5.3,-1.084202172486E-16)); +#92377 = VECTOR('',#92378,1.); +#92378 = DIRECTION('',(-1.,-0.,-0.)); +#92379 = ORIENTED_EDGE('',*,*,#92351,.T.); +#92380 = PLANE('',#92381); +#92381 = AXIS2_PLACEMENT_3D('',#92382,#92383,#92384); +#92382 = CARTESIAN_POINT('',(1.65,-5.3,-1.084202172486E-16)); +#92383 = DIRECTION('',(-0.,1.,0.)); +#92384 = DIRECTION('',(0.,0.,1.)); +#92385 = ADVANCED_FACE('',(#92386),#92406,.F.); +#92386 = FACE_BOUND('',#92387,.T.); +#92387 = EDGE_LOOP('',(#92388,#92389,#92398,#92404,#92405)); +#92388 = ORIENTED_EDGE('',*,*,#80671,.T.); +#92389 = ORIENTED_EDGE('',*,*,#92390,.T.); +#92390 = EDGE_CURVE('',#80664,#92391,#92393,.T.); +#92391 = VERTEX_POINT('',#92392); +#92392 = CARTESIAN_POINT('',(1.65,-4.45,-1.084202172486E-16)); +#92393 = CIRCLE('',#92394,0.2); +#92394 = AXIS2_PLACEMENT_3D('',#92395,#92396,#92397); +#92395 = CARTESIAN_POINT('',(1.65,-4.45,0.2)); +#92396 = DIRECTION('',(-1.,-4.130293990421E-16,-0.)); +#92397 = DIRECTION('',(-4.130293990421E-16,1.,0.)); +#92398 = ORIENTED_EDGE('',*,*,#92399,.F.); +#92399 = EDGE_CURVE('',#92367,#92391,#92400,.T.); +#92400 = LINE('',#92401,#92402); +#92401 = CARTESIAN_POINT('',(1.65,-4.25,-1.084202172486E-16)); +#92402 = VECTOR('',#92403,1.); +#92403 = DIRECTION('',(-4.130293990421E-16,1.,-0.)); +#92404 = ORIENTED_EDGE('',*,*,#92366,.T.); +#92405 = ORIENTED_EDGE('',*,*,#92302,.T.); +#92406 = PLANE('',#92407); +#92407 = AXIS2_PLACEMENT_3D('',#92408,#92409,#92410); +#92408 = CARTESIAN_POINT('',(1.65,-4.25,-1.084202172486E-16)); +#92409 = DIRECTION('',(1.,4.130293990421E-16,0.)); +#92410 = DIRECTION('',(-4.130293990421E-16,1.,0.)); +#92411 = ADVANCED_FACE('',(#92412),#92423,.F.); +#92412 = FACE_BOUND('',#92413,.T.); +#92413 = EDGE_LOOP('',(#92414,#92415,#92421,#92422)); +#92414 = ORIENTED_EDGE('',*,*,#92399,.T.); +#92415 = ORIENTED_EDGE('',*,*,#92416,.T.); +#92416 = EDGE_CURVE('',#92391,#92333,#92417,.T.); +#92417 = LINE('',#92418,#92419); +#92418 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#92419 = VECTOR('',#92420,1.); +#92420 = DIRECTION('',(1.,0.,0.)); +#92421 = ORIENTED_EDGE('',*,*,#92332,.T.); +#92422 = ORIENTED_EDGE('',*,*,#92374,.T.); +#92423 = PLANE('',#92424); +#92424 = AXIS2_PLACEMENT_3D('',#92425,#92426,#92427); +#92425 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92426 = DIRECTION('',(-0.,0.,1.)); +#92427 = DIRECTION('',(1.,0.,0.)); +#92428 = ADVANCED_FACE('',(#92429),#92454,.F.); +#92429 = FACE_BOUND('',#92430,.T.); +#92430 = EDGE_LOOP('',(#92431,#92439,#92440,#92448)); +#92431 = ORIENTED_EDGE('',*,*,#92432,.F.); +#92432 = EDGE_CURVE('',#80872,#92433,#92435,.T.); +#92433 = VERTEX_POINT('',#92434); +#92434 = CARTESIAN_POINT('',(-1.65,-5.3,0.2)); +#92435 = LINE('',#92436,#92437); +#92436 = CARTESIAN_POINT('',(-1.65,-4.25,0.2)); +#92437 = VECTOR('',#92438,1.); +#92438 = DIRECTION('',(-4.130293990421E-16,-1.,0.)); +#92439 = ORIENTED_EDGE('',*,*,#91260,.F.); +#92440 = ORIENTED_EDGE('',*,*,#92441,.F.); +#92441 = EDGE_CURVE('',#92442,#80896,#92444,.T.); +#92442 = VERTEX_POINT('',#92443); +#92443 = CARTESIAN_POINT('',(-1.85,-5.3,0.2)); +#92444 = LINE('',#92445,#92446); +#92445 = CARTESIAN_POINT('',(-1.85,-4.25,0.2)); +#92446 = VECTOR('',#92447,1.); +#92447 = DIRECTION('',(4.130293990421E-16,1.,-0.)); +#92448 = ORIENTED_EDGE('',*,*,#92449,.F.); +#92449 = EDGE_CURVE('',#92433,#92442,#92450,.T.); +#92450 = LINE('',#92451,#92452); +#92451 = CARTESIAN_POINT('',(-1.65,-5.3,0.2)); +#92452 = VECTOR('',#92453,1.); +#92453 = DIRECTION('',(-1.,0.,0.)); +#92454 = PLANE('',#92455); +#92455 = AXIS2_PLACEMENT_3D('',#92456,#92457,#92458); +#92456 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92457 = DIRECTION('',(0.,0.,-1.)); +#92458 = DIRECTION('',(-1.,0.,0.)); +#92459 = ADVANCED_FACE('',(#92460),#92487,.F.); +#92460 = FACE_BOUND('',#92461,.T.); +#92461 = EDGE_LOOP('',(#92462,#92472,#92479,#92480,#92481)); +#92462 = ORIENTED_EDGE('',*,*,#92463,.F.); +#92463 = EDGE_CURVE('',#92464,#92466,#92468,.T.); +#92464 = VERTEX_POINT('',#92465); +#92465 = CARTESIAN_POINT('',(-1.65,-4.45,-1.084202172486E-16)); +#92466 = VERTEX_POINT('',#92467); +#92467 = CARTESIAN_POINT('',(-1.65,-5.3,-1.084202172486E-16)); +#92468 = LINE('',#92469,#92470); +#92469 = CARTESIAN_POINT('',(-1.65,-4.25,-1.084202172486E-16)); +#92470 = VECTOR('',#92471,1.); +#92471 = DIRECTION('',(-4.130293990421E-16,-1.,0.)); +#92472 = ORIENTED_EDGE('',*,*,#92473,.T.); +#92473 = EDGE_CURVE('',#92464,#80880,#92474,.T.); +#92474 = CIRCLE('',#92475,0.2); +#92475 = AXIS2_PLACEMENT_3D('',#92476,#92477,#92478); +#92476 = CARTESIAN_POINT('',(-1.65,-4.45,0.2)); +#92477 = DIRECTION('',(1.,-4.130293990421E-16,-0.)); +#92478 = DIRECTION('',(-4.130293990421E-16,-1.,0.)); +#92479 = ORIENTED_EDGE('',*,*,#80879,.T.); +#92480 = ORIENTED_EDGE('',*,*,#92432,.T.); +#92481 = ORIENTED_EDGE('',*,*,#92482,.F.); +#92482 = EDGE_CURVE('',#92466,#92433,#92483,.T.); +#92483 = LINE('',#92484,#92485); +#92484 = CARTESIAN_POINT('',(-1.65,-5.3,-1.084202172486E-16)); +#92485 = VECTOR('',#92486,1.); +#92486 = DIRECTION('',(-0.,-0.,1.)); +#92487 = PLANE('',#92488); +#92488 = AXIS2_PLACEMENT_3D('',#92489,#92490,#92491); +#92489 = CARTESIAN_POINT('',(-1.65,-4.25,-1.084202172486E-16)); +#92490 = DIRECTION('',(-1.,4.130293990421E-16,0.)); +#92491 = DIRECTION('',(-4.130293990421E-16,-1.,0.)); +#92492 = ADVANCED_FACE('',(#92493),#92511,.F.); +#92493 = FACE_BOUND('',#92494,.T.); +#92494 = EDGE_LOOP('',(#92495,#92496,#92504,#92510)); +#92495 = ORIENTED_EDGE('',*,*,#92449,.T.); +#92496 = ORIENTED_EDGE('',*,*,#92497,.F.); +#92497 = EDGE_CURVE('',#92498,#92442,#92500,.T.); +#92498 = VERTEX_POINT('',#92499); +#92499 = CARTESIAN_POINT('',(-1.85,-5.3,-1.084202172486E-16)); +#92500 = LINE('',#92501,#92502); +#92501 = CARTESIAN_POINT('',(-1.85,-5.3,-1.084202172486E-16)); +#92502 = VECTOR('',#92503,1.); +#92503 = DIRECTION('',(-0.,-0.,1.)); +#92504 = ORIENTED_EDGE('',*,*,#92505,.F.); +#92505 = EDGE_CURVE('',#92466,#92498,#92506,.T.); +#92506 = LINE('',#92507,#92508); +#92507 = CARTESIAN_POINT('',(-1.65,-5.3,-1.084202172486E-16)); +#92508 = VECTOR('',#92509,1.); +#92509 = DIRECTION('',(-1.,0.,0.)); +#92510 = ORIENTED_EDGE('',*,*,#92482,.T.); +#92511 = PLANE('',#92512); +#92512 = AXIS2_PLACEMENT_3D('',#92513,#92514,#92515); +#92513 = CARTESIAN_POINT('',(-1.65,-5.3,-1.084202172486E-16)); +#92514 = DIRECTION('',(0.,1.,0.)); +#92515 = DIRECTION('',(0.,-0.,1.)); +#92516 = ADVANCED_FACE('',(#92517),#92537,.F.); +#92517 = FACE_BOUND('',#92518,.T.); +#92518 = EDGE_LOOP('',(#92519,#92520,#92529,#92535,#92536)); +#92519 = ORIENTED_EDGE('',*,*,#80895,.T.); +#92520 = ORIENTED_EDGE('',*,*,#92521,.T.); +#92521 = EDGE_CURVE('',#80888,#92522,#92524,.T.); +#92522 = VERTEX_POINT('',#92523); +#92523 = CARTESIAN_POINT('',(-1.85,-4.45,-1.084202172486E-16)); +#92524 = CIRCLE('',#92525,0.2); +#92525 = AXIS2_PLACEMENT_3D('',#92526,#92527,#92528); +#92526 = CARTESIAN_POINT('',(-1.85,-4.45,0.2)); +#92527 = DIRECTION('',(-1.,4.130293990421E-16,0.)); +#92528 = DIRECTION('',(4.130293990421E-16,1.,0.)); +#92529 = ORIENTED_EDGE('',*,*,#92530,.F.); +#92530 = EDGE_CURVE('',#92498,#92522,#92531,.T.); +#92531 = LINE('',#92532,#92533); +#92532 = CARTESIAN_POINT('',(-1.85,-4.25,-1.084202172486E-16)); +#92533 = VECTOR('',#92534,1.); +#92534 = DIRECTION('',(4.130293990421E-16,1.,-0.)); +#92535 = ORIENTED_EDGE('',*,*,#92497,.T.); +#92536 = ORIENTED_EDGE('',*,*,#92441,.T.); +#92537 = PLANE('',#92538); +#92538 = AXIS2_PLACEMENT_3D('',#92539,#92540,#92541); +#92539 = CARTESIAN_POINT('',(-1.85,-4.25,-1.084202172486E-16)); +#92540 = DIRECTION('',(1.,-4.130293990421E-16,0.)); +#92541 = DIRECTION('',(4.130293990421E-16,1.,0.)); +#92542 = ADVANCED_FACE('',(#92543),#92554,.T.); +#92543 = FACE_BOUND('',#92544,.T.); +#92544 = EDGE_LOOP('',(#92545,#92546,#92552,#92553)); +#92545 = ORIENTED_EDGE('',*,*,#92530,.T.); +#92546 = ORIENTED_EDGE('',*,*,#92547,.T.); +#92547 = EDGE_CURVE('',#92522,#92464,#92548,.T.); +#92548 = LINE('',#92549,#92550); +#92549 = CARTESIAN_POINT('',(-1.65,-4.45,-1.084202172486E-16)); +#92550 = VECTOR('',#92551,1.); +#92551 = DIRECTION('',(1.,-4.336808689942E-15,0.)); +#92552 = ORIENTED_EDGE('',*,*,#92463,.T.); +#92553 = ORIENTED_EDGE('',*,*,#92505,.T.); +#92554 = PLANE('',#92555); +#92555 = AXIS2_PLACEMENT_3D('',#92556,#92557,#92558); +#92556 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92557 = DIRECTION('',(0.,0.,-1.)); +#92558 = DIRECTION('',(-1.,0.,0.)); +#92559 = ADVANCED_FACE('',(#92560),#92585,.F.); +#92560 = FACE_BOUND('',#92561,.T.); +#92561 = EDGE_LOOP('',(#92562,#92570,#92571,#92579)); +#92562 = ORIENTED_EDGE('',*,*,#92563,.F.); +#92563 = EDGE_CURVE('',#80840,#92564,#92566,.T.); +#92564 = VERTEX_POINT('',#92565); +#92565 = CARTESIAN_POINT('',(-1.15,-5.3,0.2)); +#92566 = LINE('',#92567,#92568); +#92567 = CARTESIAN_POINT('',(-1.15,-4.25,0.2)); +#92568 = VECTOR('',#92569,1.); +#92569 = DIRECTION('',(-2.065146995211E-16,-1.,0.)); +#92570 = ORIENTED_EDGE('',*,*,#91267,.F.); +#92571 = ORIENTED_EDGE('',*,*,#92572,.F.); +#92572 = EDGE_CURVE('',#92573,#80864,#92575,.T.); +#92573 = VERTEX_POINT('',#92574); +#92574 = CARTESIAN_POINT('',(-1.35,-5.3,0.2)); +#92575 = LINE('',#92576,#92577); +#92576 = CARTESIAN_POINT('',(-1.35,-4.25,0.2)); +#92577 = VECTOR('',#92578,1.); +#92578 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92579 = ORIENTED_EDGE('',*,*,#92580,.F.); +#92580 = EDGE_CURVE('',#92564,#92573,#92581,.T.); +#92581 = LINE('',#92582,#92583); +#92582 = CARTESIAN_POINT('',(-1.15,-5.3,0.2)); +#92583 = VECTOR('',#92584,1.); +#92584 = DIRECTION('',(-1.,0.,0.)); +#92585 = PLANE('',#92586); +#92586 = AXIS2_PLACEMENT_3D('',#92587,#92588,#92589); +#92587 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92588 = DIRECTION('',(0.,0.,-1.)); +#92589 = DIRECTION('',(-1.,0.,0.)); +#92590 = ADVANCED_FACE('',(#92591),#92618,.F.); +#92591 = FACE_BOUND('',#92592,.T.); +#92592 = EDGE_LOOP('',(#92593,#92603,#92610,#92611,#92612)); +#92593 = ORIENTED_EDGE('',*,*,#92594,.F.); +#92594 = EDGE_CURVE('',#92595,#92597,#92599,.T.); +#92595 = VERTEX_POINT('',#92596); +#92596 = CARTESIAN_POINT('',(-1.15,-4.45,-1.084202172486E-16)); +#92597 = VERTEX_POINT('',#92598); +#92598 = CARTESIAN_POINT('',(-1.15,-5.3,-1.084202172486E-16)); +#92599 = LINE('',#92600,#92601); +#92600 = CARTESIAN_POINT('',(-1.15,-4.25,-1.084202172486E-16)); +#92601 = VECTOR('',#92602,1.); +#92602 = DIRECTION('',(-2.065146995211E-16,-1.,0.)); +#92603 = ORIENTED_EDGE('',*,*,#92604,.T.); +#92604 = EDGE_CURVE('',#92595,#80848,#92605,.T.); +#92605 = CIRCLE('',#92606,0.2); +#92606 = AXIS2_PLACEMENT_3D('',#92607,#92608,#92609); +#92607 = CARTESIAN_POINT('',(-1.15,-4.45,0.2)); +#92608 = DIRECTION('',(1.,-2.065146995211E-16,-0.)); +#92609 = DIRECTION('',(-2.065146995211E-16,-1.,0.)); +#92610 = ORIENTED_EDGE('',*,*,#80847,.T.); +#92611 = ORIENTED_EDGE('',*,*,#92563,.T.); +#92612 = ORIENTED_EDGE('',*,*,#92613,.F.); +#92613 = EDGE_CURVE('',#92597,#92564,#92614,.T.); +#92614 = LINE('',#92615,#92616); +#92615 = CARTESIAN_POINT('',(-1.15,-5.3,-1.084202172486E-16)); +#92616 = VECTOR('',#92617,1.); +#92617 = DIRECTION('',(-0.,-0.,1.)); +#92618 = PLANE('',#92619); +#92619 = AXIS2_PLACEMENT_3D('',#92620,#92621,#92622); +#92620 = CARTESIAN_POINT('',(-1.15,-4.25,-1.084202172486E-16)); +#92621 = DIRECTION('',(-1.,2.065146995211E-16,0.)); +#92622 = DIRECTION('',(-2.065146995211E-16,-1.,0.)); +#92623 = ADVANCED_FACE('',(#92624),#92642,.F.); +#92624 = FACE_BOUND('',#92625,.T.); +#92625 = EDGE_LOOP('',(#92626,#92627,#92635,#92641)); +#92626 = ORIENTED_EDGE('',*,*,#92580,.T.); +#92627 = ORIENTED_EDGE('',*,*,#92628,.F.); +#92628 = EDGE_CURVE('',#92629,#92573,#92631,.T.); +#92629 = VERTEX_POINT('',#92630); +#92630 = CARTESIAN_POINT('',(-1.35,-5.3,-1.084202172486E-16)); +#92631 = LINE('',#92632,#92633); +#92632 = CARTESIAN_POINT('',(-1.35,-5.3,-1.084202172486E-16)); +#92633 = VECTOR('',#92634,1.); +#92634 = DIRECTION('',(-0.,-0.,1.)); +#92635 = ORIENTED_EDGE('',*,*,#92636,.F.); +#92636 = EDGE_CURVE('',#92597,#92629,#92637,.T.); +#92637 = LINE('',#92638,#92639); +#92638 = CARTESIAN_POINT('',(-1.15,-5.3,-1.084202172486E-16)); +#92639 = VECTOR('',#92640,1.); +#92640 = DIRECTION('',(-1.,0.,0.)); +#92641 = ORIENTED_EDGE('',*,*,#92613,.T.); +#92642 = PLANE('',#92643); +#92643 = AXIS2_PLACEMENT_3D('',#92644,#92645,#92646); +#92644 = CARTESIAN_POINT('',(-1.15,-5.3,-1.084202172486E-16)); +#92645 = DIRECTION('',(0.,1.,0.)); +#92646 = DIRECTION('',(0.,-0.,1.)); +#92647 = ADVANCED_FACE('',(#92648),#92668,.F.); +#92648 = FACE_BOUND('',#92649,.T.); +#92649 = EDGE_LOOP('',(#92650,#92651,#92660,#92666,#92667)); +#92650 = ORIENTED_EDGE('',*,*,#80863,.T.); +#92651 = ORIENTED_EDGE('',*,*,#92652,.T.); +#92652 = EDGE_CURVE('',#80856,#92653,#92655,.T.); +#92653 = VERTEX_POINT('',#92654); +#92654 = CARTESIAN_POINT('',(-1.35,-4.45,-1.084202172486E-16)); +#92655 = CIRCLE('',#92656,0.2); +#92656 = AXIS2_PLACEMENT_3D('',#92657,#92658,#92659); +#92657 = CARTESIAN_POINT('',(-1.35,-4.45,0.2)); +#92658 = DIRECTION('',(-1.,2.065146995211E-16,0.)); +#92659 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92660 = ORIENTED_EDGE('',*,*,#92661,.F.); +#92661 = EDGE_CURVE('',#92629,#92653,#92662,.T.); +#92662 = LINE('',#92663,#92664); +#92663 = CARTESIAN_POINT('',(-1.35,-4.25,-1.084202172486E-16)); +#92664 = VECTOR('',#92665,1.); +#92665 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92666 = ORIENTED_EDGE('',*,*,#92628,.T.); +#92667 = ORIENTED_EDGE('',*,*,#92572,.T.); +#92668 = PLANE('',#92669); +#92669 = AXIS2_PLACEMENT_3D('',#92670,#92671,#92672); +#92670 = CARTESIAN_POINT('',(-1.35,-4.25,-1.084202172486E-16)); +#92671 = DIRECTION('',(1.,-2.065146995211E-16,0.)); +#92672 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92673 = ADVANCED_FACE('',(#92674),#92685,.T.); +#92674 = FACE_BOUND('',#92675,.T.); +#92675 = EDGE_LOOP('',(#92676,#92677,#92683,#92684)); +#92676 = ORIENTED_EDGE('',*,*,#92661,.T.); +#92677 = ORIENTED_EDGE('',*,*,#92678,.T.); +#92678 = EDGE_CURVE('',#92653,#92595,#92679,.T.); +#92679 = LINE('',#92680,#92681); +#92680 = CARTESIAN_POINT('',(-1.15,-4.45,-1.084202172486E-16)); +#92681 = VECTOR('',#92682,1.); +#92682 = DIRECTION('',(1.,0.,0.)); +#92683 = ORIENTED_EDGE('',*,*,#92594,.T.); +#92684 = ORIENTED_EDGE('',*,*,#92636,.T.); +#92685 = PLANE('',#92686); +#92686 = AXIS2_PLACEMENT_3D('',#92687,#92688,#92689); +#92687 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92688 = DIRECTION('',(0.,0.,-1.)); +#92689 = DIRECTION('',(-1.,0.,0.)); +#92690 = ADVANCED_FACE('',(#92691),#92716,.F.); +#92691 = FACE_BOUND('',#92692,.T.); +#92692 = EDGE_LOOP('',(#92693,#92701,#92702,#92710)); +#92693 = ORIENTED_EDGE('',*,*,#92694,.F.); +#92694 = EDGE_CURVE('',#80808,#92695,#92697,.T.); +#92695 = VERTEX_POINT('',#92696); +#92696 = CARTESIAN_POINT('',(-0.65,-5.3,0.2)); +#92697 = LINE('',#92698,#92699); +#92698 = CARTESIAN_POINT('',(-0.65,-4.25,0.2)); +#92699 = VECTOR('',#92700,1.); +#92700 = DIRECTION('',(-3.097720492816E-16,-1.,0.)); +#92701 = ORIENTED_EDGE('',*,*,#91274,.F.); +#92702 = ORIENTED_EDGE('',*,*,#92703,.F.); +#92703 = EDGE_CURVE('',#92704,#80832,#92706,.T.); +#92704 = VERTEX_POINT('',#92705); +#92705 = CARTESIAN_POINT('',(-0.85,-5.3,0.2)); +#92706 = LINE('',#92707,#92708); +#92707 = CARTESIAN_POINT('',(-0.85,-4.25,0.2)); +#92708 = VECTOR('',#92709,1.); +#92709 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92710 = ORIENTED_EDGE('',*,*,#92711,.F.); +#92711 = EDGE_CURVE('',#92695,#92704,#92712,.T.); +#92712 = LINE('',#92713,#92714); +#92713 = CARTESIAN_POINT('',(-0.65,-5.3,0.2)); +#92714 = VECTOR('',#92715,1.); +#92715 = DIRECTION('',(-1.,0.,0.)); +#92716 = PLANE('',#92717); +#92717 = AXIS2_PLACEMENT_3D('',#92718,#92719,#92720); +#92718 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92719 = DIRECTION('',(0.,0.,-1.)); +#92720 = DIRECTION('',(-1.,0.,0.)); +#92721 = ADVANCED_FACE('',(#92722),#92749,.F.); +#92722 = FACE_BOUND('',#92723,.T.); +#92723 = EDGE_LOOP('',(#92724,#92734,#92741,#92742,#92743)); +#92724 = ORIENTED_EDGE('',*,*,#92725,.F.); +#92725 = EDGE_CURVE('',#92726,#92728,#92730,.T.); +#92726 = VERTEX_POINT('',#92727); +#92727 = CARTESIAN_POINT('',(-0.65,-4.45,-1.084202172486E-16)); +#92728 = VERTEX_POINT('',#92729); +#92729 = CARTESIAN_POINT('',(-0.65,-5.3,-1.084202172486E-16)); +#92730 = LINE('',#92731,#92732); +#92731 = CARTESIAN_POINT('',(-0.65,-4.25,-1.084202172486E-16)); +#92732 = VECTOR('',#92733,1.); +#92733 = DIRECTION('',(-3.097720492816E-16,-1.,0.)); +#92734 = ORIENTED_EDGE('',*,*,#92735,.T.); +#92735 = EDGE_CURVE('',#92726,#80816,#92736,.T.); +#92736 = CIRCLE('',#92737,0.2); +#92737 = AXIS2_PLACEMENT_3D('',#92738,#92739,#92740); +#92738 = CARTESIAN_POINT('',(-0.65,-4.45,0.2)); +#92739 = DIRECTION('',(1.,-3.097720492816E-16,-0.)); +#92740 = DIRECTION('',(-3.097720492816E-16,-1.,0.)); +#92741 = ORIENTED_EDGE('',*,*,#80815,.T.); +#92742 = ORIENTED_EDGE('',*,*,#92694,.T.); +#92743 = ORIENTED_EDGE('',*,*,#92744,.F.); +#92744 = EDGE_CURVE('',#92728,#92695,#92745,.T.); +#92745 = LINE('',#92746,#92747); +#92746 = CARTESIAN_POINT('',(-0.65,-5.3,-1.084202172486E-16)); +#92747 = VECTOR('',#92748,1.); +#92748 = DIRECTION('',(-0.,-0.,1.)); +#92749 = PLANE('',#92750); +#92750 = AXIS2_PLACEMENT_3D('',#92751,#92752,#92753); +#92751 = CARTESIAN_POINT('',(-0.65,-4.25,-1.084202172486E-16)); +#92752 = DIRECTION('',(-1.,3.097720492816E-16,0.)); +#92753 = DIRECTION('',(-3.097720492816E-16,-1.,0.)); +#92754 = ADVANCED_FACE('',(#92755),#92773,.F.); +#92755 = FACE_BOUND('',#92756,.T.); +#92756 = EDGE_LOOP('',(#92757,#92758,#92766,#92772)); +#92757 = ORIENTED_EDGE('',*,*,#92711,.T.); +#92758 = ORIENTED_EDGE('',*,*,#92759,.F.); +#92759 = EDGE_CURVE('',#92760,#92704,#92762,.T.); +#92760 = VERTEX_POINT('',#92761); +#92761 = CARTESIAN_POINT('',(-0.85,-5.3,-1.084202172486E-16)); +#92762 = LINE('',#92763,#92764); +#92763 = CARTESIAN_POINT('',(-0.85,-5.3,-1.084202172486E-16)); +#92764 = VECTOR('',#92765,1.); +#92765 = DIRECTION('',(-0.,-0.,1.)); +#92766 = ORIENTED_EDGE('',*,*,#92767,.F.); +#92767 = EDGE_CURVE('',#92728,#92760,#92768,.T.); +#92768 = LINE('',#92769,#92770); +#92769 = CARTESIAN_POINT('',(-0.65,-5.3,-1.084202172486E-16)); +#92770 = VECTOR('',#92771,1.); +#92771 = DIRECTION('',(-1.,0.,0.)); +#92772 = ORIENTED_EDGE('',*,*,#92744,.T.); +#92773 = PLANE('',#92774); +#92774 = AXIS2_PLACEMENT_3D('',#92775,#92776,#92777); +#92775 = CARTESIAN_POINT('',(-0.65,-5.3,-1.084202172486E-16)); +#92776 = DIRECTION('',(0.,1.,0.)); +#92777 = DIRECTION('',(0.,-0.,1.)); +#92778 = ADVANCED_FACE('',(#92779),#92799,.F.); +#92779 = FACE_BOUND('',#92780,.T.); +#92780 = EDGE_LOOP('',(#92781,#92782,#92791,#92797,#92798)); +#92781 = ORIENTED_EDGE('',*,*,#80831,.T.); +#92782 = ORIENTED_EDGE('',*,*,#92783,.T.); +#92783 = EDGE_CURVE('',#80824,#92784,#92786,.T.); +#92784 = VERTEX_POINT('',#92785); +#92785 = CARTESIAN_POINT('',(-0.85,-4.45,-1.084202172486E-16)); +#92786 = CIRCLE('',#92787,0.2); +#92787 = AXIS2_PLACEMENT_3D('',#92788,#92789,#92790); +#92788 = CARTESIAN_POINT('',(-0.85,-4.45,0.2)); +#92789 = DIRECTION('',(-1.,2.065146995211E-16,0.)); +#92790 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92791 = ORIENTED_EDGE('',*,*,#92792,.F.); +#92792 = EDGE_CURVE('',#92760,#92784,#92793,.T.); +#92793 = LINE('',#92794,#92795); +#92794 = CARTESIAN_POINT('',(-0.85,-4.25,-1.084202172486E-16)); +#92795 = VECTOR('',#92796,1.); +#92796 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92797 = ORIENTED_EDGE('',*,*,#92759,.T.); +#92798 = ORIENTED_EDGE('',*,*,#92703,.T.); +#92799 = PLANE('',#92800); +#92800 = AXIS2_PLACEMENT_3D('',#92801,#92802,#92803); +#92801 = CARTESIAN_POINT('',(-0.85,-4.25,-1.084202172486E-16)); +#92802 = DIRECTION('',(1.,-2.065146995211E-16,0.)); +#92803 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92804 = ADVANCED_FACE('',(#92805),#92816,.T.); +#92805 = FACE_BOUND('',#92806,.T.); +#92806 = EDGE_LOOP('',(#92807,#92808,#92814,#92815)); +#92807 = ORIENTED_EDGE('',*,*,#92792,.T.); +#92808 = ORIENTED_EDGE('',*,*,#92809,.T.); +#92809 = EDGE_CURVE('',#92784,#92726,#92810,.T.); +#92810 = LINE('',#92811,#92812); +#92811 = CARTESIAN_POINT('',(-0.65,-4.45,-1.084202172486E-16)); +#92812 = VECTOR('',#92813,1.); +#92813 = DIRECTION('',(1.,0.,0.)); +#92814 = ORIENTED_EDGE('',*,*,#92725,.T.); +#92815 = ORIENTED_EDGE('',*,*,#92767,.T.); +#92816 = PLANE('',#92817); +#92817 = AXIS2_PLACEMENT_3D('',#92818,#92819,#92820); +#92818 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92819 = DIRECTION('',(0.,0.,-1.)); +#92820 = DIRECTION('',(-1.,0.,0.)); +#92821 = ADVANCED_FACE('',(#92822),#92847,.F.); +#92822 = FACE_BOUND('',#92823,.T.); +#92823 = EDGE_LOOP('',(#92824,#92832,#92833,#92841)); +#92824 = ORIENTED_EDGE('',*,*,#92825,.F.); +#92825 = EDGE_CURVE('',#80776,#92826,#92828,.T.); +#92826 = VERTEX_POINT('',#92827); +#92827 = CARTESIAN_POINT('',(-0.15,-5.3,0.2)); +#92828 = LINE('',#92829,#92830); +#92829 = CARTESIAN_POINT('',(-0.15,-4.25,0.2)); +#92830 = VECTOR('',#92831,1.); +#92831 = DIRECTION('',(-1.548860246408E-16,-1.,0.)); +#92832 = ORIENTED_EDGE('',*,*,#91281,.F.); +#92833 = ORIENTED_EDGE('',*,*,#92834,.F.); +#92834 = EDGE_CURVE('',#92835,#80800,#92837,.T.); +#92835 = VERTEX_POINT('',#92836); +#92836 = CARTESIAN_POINT('',(-0.35,-5.3,0.2)); +#92837 = LINE('',#92838,#92839); +#92838 = CARTESIAN_POINT('',(-0.35,-4.25,0.2)); +#92839 = VECTOR('',#92840,1.); +#92840 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92841 = ORIENTED_EDGE('',*,*,#92842,.F.); +#92842 = EDGE_CURVE('',#92826,#92835,#92843,.T.); +#92843 = LINE('',#92844,#92845); +#92844 = CARTESIAN_POINT('',(-0.15,-5.3,0.2)); +#92845 = VECTOR('',#92846,1.); +#92846 = DIRECTION('',(-1.,0.,0.)); +#92847 = PLANE('',#92848); +#92848 = AXIS2_PLACEMENT_3D('',#92849,#92850,#92851); +#92849 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92850 = DIRECTION('',(0.,0.,-1.)); +#92851 = DIRECTION('',(-1.,0.,0.)); +#92852 = ADVANCED_FACE('',(#92853),#92880,.F.); +#92853 = FACE_BOUND('',#92854,.T.); +#92854 = EDGE_LOOP('',(#92855,#92865,#92872,#92873,#92874)); +#92855 = ORIENTED_EDGE('',*,*,#92856,.F.); +#92856 = EDGE_CURVE('',#92857,#92859,#92861,.T.); +#92857 = VERTEX_POINT('',#92858); +#92858 = CARTESIAN_POINT('',(-0.15,-4.45,-1.084202172486E-16)); +#92859 = VERTEX_POINT('',#92860); +#92860 = CARTESIAN_POINT('',(-0.15,-5.3,-1.084202172486E-16)); +#92861 = LINE('',#92862,#92863); +#92862 = CARTESIAN_POINT('',(-0.15,-4.25,-1.084202172486E-16)); +#92863 = VECTOR('',#92864,1.); +#92864 = DIRECTION('',(-1.548860246408E-16,-1.,0.)); +#92865 = ORIENTED_EDGE('',*,*,#92866,.T.); +#92866 = EDGE_CURVE('',#92857,#80784,#92867,.T.); +#92867 = CIRCLE('',#92868,0.2); +#92868 = AXIS2_PLACEMENT_3D('',#92869,#92870,#92871); +#92869 = CARTESIAN_POINT('',(-0.15,-4.45,0.2)); +#92870 = DIRECTION('',(1.,-1.548860246408E-16,-0.)); +#92871 = DIRECTION('',(-1.548860246408E-16,-1.,0.)); +#92872 = ORIENTED_EDGE('',*,*,#80783,.T.); +#92873 = ORIENTED_EDGE('',*,*,#92825,.T.); +#92874 = ORIENTED_EDGE('',*,*,#92875,.F.); +#92875 = EDGE_CURVE('',#92859,#92826,#92876,.T.); +#92876 = LINE('',#92877,#92878); +#92877 = CARTESIAN_POINT('',(-0.15,-5.3,-1.084202172486E-16)); +#92878 = VECTOR('',#92879,1.); +#92879 = DIRECTION('',(-0.,-0.,1.)); +#92880 = PLANE('',#92881); +#92881 = AXIS2_PLACEMENT_3D('',#92882,#92883,#92884); +#92882 = CARTESIAN_POINT('',(-0.15,-4.25,-1.084202172486E-16)); +#92883 = DIRECTION('',(-1.,1.548860246408E-16,0.)); +#92884 = DIRECTION('',(-1.548860246408E-16,-1.,0.)); +#92885 = ADVANCED_FACE('',(#92886),#92904,.F.); +#92886 = FACE_BOUND('',#92887,.T.); +#92887 = EDGE_LOOP('',(#92888,#92889,#92897,#92903)); +#92888 = ORIENTED_EDGE('',*,*,#92842,.T.); +#92889 = ORIENTED_EDGE('',*,*,#92890,.F.); +#92890 = EDGE_CURVE('',#92891,#92835,#92893,.T.); +#92891 = VERTEX_POINT('',#92892); +#92892 = CARTESIAN_POINT('',(-0.35,-5.3,-1.084202172486E-16)); +#92893 = LINE('',#92894,#92895); +#92894 = CARTESIAN_POINT('',(-0.35,-5.3,-1.084202172486E-16)); +#92895 = VECTOR('',#92896,1.); +#92896 = DIRECTION('',(-0.,-0.,1.)); +#92897 = ORIENTED_EDGE('',*,*,#92898,.F.); +#92898 = EDGE_CURVE('',#92859,#92891,#92899,.T.); +#92899 = LINE('',#92900,#92901); +#92900 = CARTESIAN_POINT('',(-0.15,-5.3,-1.084202172486E-16)); +#92901 = VECTOR('',#92902,1.); +#92902 = DIRECTION('',(-1.,0.,0.)); +#92903 = ORIENTED_EDGE('',*,*,#92875,.T.); +#92904 = PLANE('',#92905); +#92905 = AXIS2_PLACEMENT_3D('',#92906,#92907,#92908); +#92906 = CARTESIAN_POINT('',(-0.15,-5.3,-1.084202172486E-16)); +#92907 = DIRECTION('',(0.,1.,0.)); +#92908 = DIRECTION('',(0.,-0.,1.)); +#92909 = ADVANCED_FACE('',(#92910),#92930,.F.); +#92910 = FACE_BOUND('',#92911,.T.); +#92911 = EDGE_LOOP('',(#92912,#92913,#92922,#92928,#92929)); +#92912 = ORIENTED_EDGE('',*,*,#80799,.T.); +#92913 = ORIENTED_EDGE('',*,*,#92914,.T.); +#92914 = EDGE_CURVE('',#80792,#92915,#92917,.T.); +#92915 = VERTEX_POINT('',#92916); +#92916 = CARTESIAN_POINT('',(-0.35,-4.45,-1.084202172486E-16)); +#92917 = CIRCLE('',#92918,0.2); +#92918 = AXIS2_PLACEMENT_3D('',#92919,#92920,#92921); +#92919 = CARTESIAN_POINT('',(-0.35,-4.45,0.2)); +#92920 = DIRECTION('',(-1.,2.065146995211E-16,0.)); +#92921 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92922 = ORIENTED_EDGE('',*,*,#92923,.F.); +#92923 = EDGE_CURVE('',#92891,#92915,#92924,.T.); +#92924 = LINE('',#92925,#92926); +#92925 = CARTESIAN_POINT('',(-0.35,-4.25,-1.084202172486E-16)); +#92926 = VECTOR('',#92927,1.); +#92927 = DIRECTION('',(2.065146995211E-16,1.,-0.)); +#92928 = ORIENTED_EDGE('',*,*,#92890,.T.); +#92929 = ORIENTED_EDGE('',*,*,#92834,.T.); +#92930 = PLANE('',#92931); +#92931 = AXIS2_PLACEMENT_3D('',#92932,#92933,#92934); +#92932 = CARTESIAN_POINT('',(-0.35,-4.25,-1.084202172486E-16)); +#92933 = DIRECTION('',(1.,-2.065146995211E-16,0.)); +#92934 = DIRECTION('',(2.065146995211E-16,1.,0.)); +#92935 = ADVANCED_FACE('',(#92936),#92947,.T.); +#92936 = FACE_BOUND('',#92937,.T.); +#92937 = EDGE_LOOP('',(#92938,#92939,#92945,#92946)); +#92938 = ORIENTED_EDGE('',*,*,#92923,.T.); +#92939 = ORIENTED_EDGE('',*,*,#92940,.T.); +#92940 = EDGE_CURVE('',#92915,#92857,#92941,.T.); +#92941 = LINE('',#92942,#92943); +#92942 = CARTESIAN_POINT('',(-0.15,-4.45,-1.084202172486E-16)); +#92943 = VECTOR('',#92944,1.); +#92944 = DIRECTION('',(1.,0.,0.)); +#92945 = ORIENTED_EDGE('',*,*,#92856,.T.); +#92946 = ORIENTED_EDGE('',*,*,#92898,.T.); +#92947 = PLANE('',#92948); +#92948 = AXIS2_PLACEMENT_3D('',#92949,#92950,#92951); +#92949 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#92950 = DIRECTION('',(0.,0.,-1.)); +#92951 = DIRECTION('',(-1.,0.,0.)); +#92952 = ADVANCED_FACE('',(#92953),#92978,.T.); +#92953 = FACE_BOUND('',#92954,.T.); +#92954 = EDGE_LOOP('',(#92955,#92956,#92964,#92972)); +#92955 = ORIENTED_EDGE('',*,*,#91253,.F.); +#92956 = ORIENTED_EDGE('',*,*,#92957,.F.); +#92957 = EDGE_CURVE('',#92958,#80928,#92960,.T.); +#92958 = VERTEX_POINT('',#92959); +#92959 = CARTESIAN_POINT('',(-2.65,-5.3,0.2)); +#92960 = LINE('',#92961,#92962); +#92961 = CARTESIAN_POINT('',(-2.65,-5.3,0.2)); +#92962 = VECTOR('',#92963,1.); +#92963 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#92964 = ORIENTED_EDGE('',*,*,#92965,.F.); +#92965 = EDGE_CURVE('',#92966,#92958,#92968,.T.); +#92966 = VERTEX_POINT('',#92967); +#92967 = CARTESIAN_POINT('',(-2.25,-5.3,0.2)); +#92968 = LINE('',#92969,#92970); +#92969 = CARTESIAN_POINT('',(-2.25,-5.3,0.2)); +#92970 = VECTOR('',#92971,1.); +#92971 = DIRECTION('',(-1.,0.,0.)); +#92972 = ORIENTED_EDGE('',*,*,#92973,.F.); +#92973 = EDGE_CURVE('',#80904,#92966,#92974,.T.); +#92974 = LINE('',#92975,#92976); +#92975 = CARTESIAN_POINT('',(-2.25,-5.3,0.2)); +#92976 = VECTOR('',#92977,1.); +#92977 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#92978 = PLANE('',#92979); +#92979 = AXIS2_PLACEMENT_3D('',#92980,#92981,#92982); +#92980 = CARTESIAN_POINT('',(0.,0.,0.2)); +#92981 = DIRECTION('',(0.,-0.,1.)); +#92982 = DIRECTION('',(1.,0.,0.)); +#92983 = ADVANCED_FACE('',(#92984),#93011,.F.); +#92984 = FACE_BOUND('',#92985,.T.); +#92985 = EDGE_LOOP('',(#92986,#92996,#93003,#93004,#93005)); +#92986 = ORIENTED_EDGE('',*,*,#92987,.F.); +#92987 = EDGE_CURVE('',#92988,#92990,#92992,.T.); +#92988 = VERTEX_POINT('',#92989); +#92989 = CARTESIAN_POINT('',(-2.25,-4.45,-1.084202172486E-16)); +#92990 = VERTEX_POINT('',#92991); +#92991 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#92992 = LINE('',#92993,#92994); +#92993 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#92994 = VECTOR('',#92995,1.); +#92995 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#92996 = ORIENTED_EDGE('',*,*,#92997,.T.); +#92997 = EDGE_CURVE('',#92988,#80912,#92998,.T.); +#92998 = CIRCLE('',#92999,0.2); +#92999 = AXIS2_PLACEMENT_3D('',#93000,#93001,#93002); +#93000 = CARTESIAN_POINT('',(-2.25,-4.45,0.2)); +#93001 = DIRECTION('',(1.,-8.260587980842E-16,-0.)); +#93002 = DIRECTION('',(-8.260587980842E-16,-1.,0.)); +#93003 = ORIENTED_EDGE('',*,*,#80911,.T.); +#93004 = ORIENTED_EDGE('',*,*,#92973,.T.); +#93005 = ORIENTED_EDGE('',*,*,#93006,.F.); +#93006 = EDGE_CURVE('',#92990,#92966,#93007,.T.); +#93007 = LINE('',#93008,#93009); +#93008 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#93009 = VECTOR('',#93010,1.); +#93010 = DIRECTION('',(-0.,-0.,1.)); +#93011 = PLANE('',#93012); +#93012 = AXIS2_PLACEMENT_3D('',#93013,#93014,#93015); +#93013 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#93014 = DIRECTION('',(-1.,8.260587980842E-16,0.)); +#93015 = DIRECTION('',(-8.260587980842E-16,-1.,0.)); +#93016 = ADVANCED_FACE('',(#93017),#93035,.F.); +#93017 = FACE_BOUND('',#93018,.T.); +#93018 = EDGE_LOOP('',(#93019,#93020,#93028,#93034)); +#93019 = ORIENTED_EDGE('',*,*,#92965,.T.); +#93020 = ORIENTED_EDGE('',*,*,#93021,.F.); +#93021 = EDGE_CURVE('',#93022,#92958,#93024,.T.); +#93022 = VERTEX_POINT('',#93023); +#93023 = CARTESIAN_POINT('',(-2.65,-5.3,-1.084202172486E-16)); +#93024 = LINE('',#93025,#93026); +#93025 = CARTESIAN_POINT('',(-2.65,-5.3,-1.084202172486E-16)); +#93026 = VECTOR('',#93027,1.); +#93027 = DIRECTION('',(-0.,-0.,1.)); +#93028 = ORIENTED_EDGE('',*,*,#93029,.F.); +#93029 = EDGE_CURVE('',#92990,#93022,#93030,.T.); +#93030 = LINE('',#93031,#93032); +#93031 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#93032 = VECTOR('',#93033,1.); +#93033 = DIRECTION('',(-1.,0.,0.)); +#93034 = ORIENTED_EDGE('',*,*,#93006,.T.); +#93035 = PLANE('',#93036); +#93036 = AXIS2_PLACEMENT_3D('',#93037,#93038,#93039); +#93037 = CARTESIAN_POINT('',(-2.25,-5.3,-1.084202172486E-16)); +#93038 = DIRECTION('',(0.,1.,0.)); +#93039 = DIRECTION('',(0.,-0.,1.)); +#93040 = ADVANCED_FACE('',(#93041),#93061,.F.); +#93041 = FACE_BOUND('',#93042,.T.); +#93042 = EDGE_LOOP('',(#93043,#93044,#93053,#93059,#93060)); +#93043 = ORIENTED_EDGE('',*,*,#80927,.T.); +#93044 = ORIENTED_EDGE('',*,*,#93045,.T.); +#93045 = EDGE_CURVE('',#80920,#93046,#93048,.T.); +#93046 = VERTEX_POINT('',#93047); +#93047 = CARTESIAN_POINT('',(-2.65,-4.45,-1.084202172486E-16)); +#93048 = CIRCLE('',#93049,0.2); +#93049 = AXIS2_PLACEMENT_3D('',#93050,#93051,#93052); +#93050 = CARTESIAN_POINT('',(-2.65,-4.45,0.2)); +#93051 = DIRECTION('',(-1.,8.260587980842E-16,0.)); +#93052 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93053 = ORIENTED_EDGE('',*,*,#93054,.F.); +#93054 = EDGE_CURVE('',#93022,#93046,#93055,.T.); +#93055 = LINE('',#93056,#93057); +#93056 = CARTESIAN_POINT('',(-2.65,-5.3,-1.084202172486E-16)); +#93057 = VECTOR('',#93058,1.); +#93058 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93059 = ORIENTED_EDGE('',*,*,#93021,.T.); +#93060 = ORIENTED_EDGE('',*,*,#92957,.T.); +#93061 = PLANE('',#93062); +#93062 = AXIS2_PLACEMENT_3D('',#93063,#93064,#93065); +#93063 = CARTESIAN_POINT('',(-2.65,-5.3,-1.084202172486E-16)); +#93064 = DIRECTION('',(1.,-8.260587980842E-16,0.)); +#93065 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93066 = ADVANCED_FACE('',(#93067),#93078,.F.); +#93067 = FACE_BOUND('',#93068,.T.); +#93068 = EDGE_LOOP('',(#93069,#93070,#93076,#93077)); +#93069 = ORIENTED_EDGE('',*,*,#93054,.T.); +#93070 = ORIENTED_EDGE('',*,*,#93071,.T.); +#93071 = EDGE_CURVE('',#93046,#92988,#93072,.T.); +#93072 = LINE('',#93073,#93074); +#93073 = CARTESIAN_POINT('',(0.,-4.45,-1.084202172486E-16)); +#93074 = VECTOR('',#93075,1.); +#93075 = DIRECTION('',(1.,0.,0.)); +#93076 = ORIENTED_EDGE('',*,*,#92987,.T.); +#93077 = ORIENTED_EDGE('',*,*,#93029,.T.); +#93078 = PLANE('',#93079); +#93079 = AXIS2_PLACEMENT_3D('',#93080,#93081,#93082); +#93080 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#93081 = DIRECTION('',(0.,-0.,1.)); +#93082 = DIRECTION('',(1.,0.,0.)); +#93083 = ADVANCED_FACE('',(#93084),#93109,.F.); +#93084 = FACE_BOUND('',#93085,.T.); +#93085 = EDGE_LOOP('',(#93086,#93094,#93095,#93103)); +#93086 = ORIENTED_EDGE('',*,*,#93087,.F.); +#93087 = EDGE_CURVE('',#80936,#93088,#93090,.T.); +#93088 = VERTEX_POINT('',#93089); +#93089 = CARTESIAN_POINT('',(-3.025,-5.3,0.2)); +#93090 = LINE('',#93091,#93092); +#93091 = CARTESIAN_POINT('',(-3.025,-5.3,0.2)); +#93092 = VECTOR('',#93093,1.); +#93093 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#93094 = ORIENTED_EDGE('',*,*,#91246,.F.); +#93095 = ORIENTED_EDGE('',*,*,#93096,.F.); +#93096 = EDGE_CURVE('',#93097,#80542,#93099,.T.); +#93097 = VERTEX_POINT('',#93098); +#93098 = CARTESIAN_POINT('',(-3.425,-5.3,0.2)); +#93099 = LINE('',#93100,#93101); +#93100 = CARTESIAN_POINT('',(-3.425,-5.3,0.2)); +#93101 = VECTOR('',#93102,1.); +#93102 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93103 = ORIENTED_EDGE('',*,*,#93104,.F.); +#93104 = EDGE_CURVE('',#93088,#93097,#93105,.T.); +#93105 = LINE('',#93106,#93107); +#93106 = CARTESIAN_POINT('',(-3.425,-5.3,0.2)); +#93107 = VECTOR('',#93108,1.); +#93108 = DIRECTION('',(-1.,-0.,-0.)); +#93109 = PLANE('',#93110); +#93110 = AXIS2_PLACEMENT_3D('',#93111,#93112,#93113); +#93111 = CARTESIAN_POINT('',(0.,0.,0.2)); +#93112 = DIRECTION('',(0.,0.,-1.)); +#93113 = DIRECTION('',(-1.,0.,-0.)); +#93114 = ADVANCED_FACE('',(#93115),#93142,.F.); +#93115 = FACE_BOUND('',#93116,.T.); +#93116 = EDGE_LOOP('',(#93117,#93118,#93127,#93135,#93141)); +#93117 = ORIENTED_EDGE('',*,*,#80541,.T.); +#93118 = ORIENTED_EDGE('',*,*,#93119,.T.); +#93119 = EDGE_CURVE('',#80544,#93120,#93122,.T.); +#93120 = VERTEX_POINT('',#93121); +#93121 = CARTESIAN_POINT('',(-3.425,-4.45,-1.084202172486E-16)); +#93122 = CIRCLE('',#93123,0.2); +#93123 = AXIS2_PLACEMENT_3D('',#93124,#93125,#93126); +#93124 = CARTESIAN_POINT('',(-3.425,-4.45,0.2)); +#93125 = DIRECTION('',(-1.,8.260587980842E-16,0.)); +#93126 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93127 = ORIENTED_EDGE('',*,*,#93128,.F.); +#93128 = EDGE_CURVE('',#93129,#93120,#93131,.T.); +#93129 = VERTEX_POINT('',#93130); +#93130 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93131 = LINE('',#93132,#93133); +#93132 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93133 = VECTOR('',#93134,1.); +#93134 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93135 = ORIENTED_EDGE('',*,*,#93136,.T.); +#93136 = EDGE_CURVE('',#93129,#93097,#93137,.T.); +#93137 = LINE('',#93138,#93139); +#93138 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93139 = VECTOR('',#93140,1.); +#93140 = DIRECTION('',(-0.,-0.,1.)); +#93141 = ORIENTED_EDGE('',*,*,#93096,.T.); +#93142 = PLANE('',#93143); +#93143 = AXIS2_PLACEMENT_3D('',#93144,#93145,#93146); +#93144 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93145 = DIRECTION('',(1.,-8.260587980842E-16,0.)); +#93146 = DIRECTION('',(8.260587980842E-16,1.,0.)); +#93147 = ADVANCED_FACE('',(#93148),#93175,.F.); +#93148 = FACE_BOUND('',#93149,.T.); +#93149 = EDGE_LOOP('',(#93150,#93160,#93167,#93168,#93169)); +#93150 = ORIENTED_EDGE('',*,*,#93151,.F.); +#93151 = EDGE_CURVE('',#93152,#93154,#93156,.T.); +#93152 = VERTEX_POINT('',#93153); +#93153 = CARTESIAN_POINT('',(-3.025,-4.45,-1.084202172486E-16)); +#93154 = VERTEX_POINT('',#93155); +#93155 = CARTESIAN_POINT('',(-3.025,-5.3,-1.084202172486E-16)); +#93156 = LINE('',#93157,#93158); +#93157 = CARTESIAN_POINT('',(-3.025,-5.3,-1.084202172486E-16)); +#93158 = VECTOR('',#93159,1.); +#93159 = DIRECTION('',(-8.260587980842E-16,-1.,-0.)); +#93160 = ORIENTED_EDGE('',*,*,#93161,.T.); +#93161 = EDGE_CURVE('',#93152,#80944,#93162,.T.); +#93162 = CIRCLE('',#93163,0.2); +#93163 = AXIS2_PLACEMENT_3D('',#93164,#93165,#93166); +#93164 = CARTESIAN_POINT('',(-3.025,-4.45,0.2)); +#93165 = DIRECTION('',(1.,-8.260587980842E-16,-0.)); +#93166 = DIRECTION('',(-8.260587980842E-16,-1.,0.)); +#93167 = ORIENTED_EDGE('',*,*,#80943,.T.); +#93168 = ORIENTED_EDGE('',*,*,#93087,.T.); +#93169 = ORIENTED_EDGE('',*,*,#93170,.F.); +#93170 = EDGE_CURVE('',#93154,#93088,#93171,.T.); +#93171 = LINE('',#93172,#93173); +#93172 = CARTESIAN_POINT('',(-3.025,-5.3,-1.084202172486E-16)); +#93173 = VECTOR('',#93174,1.); +#93174 = DIRECTION('',(-0.,-0.,1.)); +#93175 = PLANE('',#93176); +#93176 = AXIS2_PLACEMENT_3D('',#93177,#93178,#93179); +#93177 = CARTESIAN_POINT('',(-3.025,-5.3,-1.084202172486E-16)); +#93178 = DIRECTION('',(-1.,8.260587980842E-16,0.)); +#93179 = DIRECTION('',(-8.260587980842E-16,-1.,0.)); +#93180 = ADVANCED_FACE('',(#93181),#93192,.F.); +#93181 = FACE_BOUND('',#93182,.T.); +#93182 = EDGE_LOOP('',(#93183,#93184,#93185,#93191)); +#93183 = ORIENTED_EDGE('',*,*,#93104,.T.); +#93184 = ORIENTED_EDGE('',*,*,#93136,.F.); +#93185 = ORIENTED_EDGE('',*,*,#93186,.F.); +#93186 = EDGE_CURVE('',#93154,#93129,#93187,.T.); +#93187 = LINE('',#93188,#93189); +#93188 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93189 = VECTOR('',#93190,1.); +#93190 = DIRECTION('',(-1.,-0.,-0.)); +#93191 = ORIENTED_EDGE('',*,*,#93170,.T.); +#93192 = PLANE('',#93193); +#93193 = AXIS2_PLACEMENT_3D('',#93194,#93195,#93196); +#93194 = CARTESIAN_POINT('',(-3.425,-5.3,-1.084202172486E-16)); +#93195 = DIRECTION('',(-0.,1.,0.)); +#93196 = DIRECTION('',(0.,0.,1.)); +#93197 = ADVANCED_FACE('',(#93198),#93209,.T.); +#93198 = FACE_BOUND('',#93199,.T.); +#93199 = EDGE_LOOP('',(#93200,#93201,#93207,#93208)); +#93200 = ORIENTED_EDGE('',*,*,#93128,.T.); +#93201 = ORIENTED_EDGE('',*,*,#93202,.T.); +#93202 = EDGE_CURVE('',#93120,#93152,#93203,.T.); +#93203 = LINE('',#93204,#93205); +#93204 = CARTESIAN_POINT('',(-3.025,-4.45,-1.084202172486E-16)); +#93205 = VECTOR('',#93206,1.); +#93206 = DIRECTION('',(1.,0.,0.)); +#93207 = ORIENTED_EDGE('',*,*,#93151,.T.); +#93208 = ORIENTED_EDGE('',*,*,#93186,.T.); +#93209 = PLANE('',#93210); +#93210 = AXIS2_PLACEMENT_3D('',#93211,#93212,#93213); +#93211 = CARTESIAN_POINT('',(0.,0.,-1.084202172486E-16)); +#93212 = DIRECTION('',(0.,0.,-1.)); +#93213 = DIRECTION('',(-1.,0.,-0.)); +#93214 = ADVANCED_FACE('',(#93215),#93221,.T.); +#93215 = FACE_BOUND('',#93216,.T.); +#93216 = EDGE_LOOP('',(#93217,#93218,#93219,#93220)); +#93217 = ORIENTED_EDGE('',*,*,#93119,.F.); +#93218 = ORIENTED_EDGE('',*,*,#80951,.T.); +#93219 = ORIENTED_EDGE('',*,*,#93161,.F.); +#93220 = ORIENTED_EDGE('',*,*,#93202,.F.); +#93221 = CYLINDRICAL_SURFACE('',#93222,0.2); +#93222 = AXIS2_PLACEMENT_3D('',#93223,#93224,#93225); +#93223 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93224 = DIRECTION('',(-1.,0.,0.)); +#93225 = DIRECTION('',(0.,0.,1.)); +#93226 = ADVANCED_FACE('',(#93227),#93233,.T.); +#93227 = FACE_BOUND('',#93228,.T.); +#93228 = EDGE_LOOP('',(#93229,#93230,#93231,#93232)); +#93229 = ORIENTED_EDGE('',*,*,#93045,.F.); +#93230 = ORIENTED_EDGE('',*,*,#80919,.T.); +#93231 = ORIENTED_EDGE('',*,*,#92997,.F.); +#93232 = ORIENTED_EDGE('',*,*,#93071,.F.); +#93233 = CYLINDRICAL_SURFACE('',#93234,0.2); +#93234 = AXIS2_PLACEMENT_3D('',#93235,#93236,#93237); +#93235 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93236 = DIRECTION('',(1.,0.,0.)); +#93237 = DIRECTION('',(0.,0.,-1.)); +#93238 = ADVANCED_FACE('',(#93239),#93245,.T.); +#93239 = FACE_BOUND('',#93240,.T.); +#93240 = EDGE_LOOP('',(#93241,#93242,#93243,#93244)); +#93241 = ORIENTED_EDGE('',*,*,#92521,.F.); +#93242 = ORIENTED_EDGE('',*,*,#80887,.T.); +#93243 = ORIENTED_EDGE('',*,*,#92473,.F.); +#93244 = ORIENTED_EDGE('',*,*,#92547,.F.); +#93245 = CYLINDRICAL_SURFACE('',#93246,0.2); +#93246 = AXIS2_PLACEMENT_3D('',#93247,#93248,#93249); +#93247 = CARTESIAN_POINT('',(-1.929879867024E-14,-4.45,0.2)); +#93248 = DIRECTION('',(-1.,4.336808689942E-15,0.)); +#93249 = DIRECTION('',(-4.336808689942E-15,-1.,0.)); +#93250 = ADVANCED_FACE('',(#93251),#93257,.T.); +#93251 = FACE_BOUND('',#93252,.T.); +#93252 = EDGE_LOOP('',(#93253,#93254,#93255,#93256)); +#93253 = ORIENTED_EDGE('',*,*,#92652,.F.); +#93254 = ORIENTED_EDGE('',*,*,#80855,.T.); +#93255 = ORIENTED_EDGE('',*,*,#92604,.F.); +#93256 = ORIENTED_EDGE('',*,*,#92678,.F.); +#93257 = CYLINDRICAL_SURFACE('',#93258,0.2); +#93258 = AXIS2_PLACEMENT_3D('',#93259,#93260,#93261); +#93259 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93260 = DIRECTION('',(-1.,0.,0.)); +#93261 = DIRECTION('',(0.,0.,1.)); +#93262 = ADVANCED_FACE('',(#93263),#93269,.T.); +#93263 = FACE_BOUND('',#93264,.T.); +#93264 = EDGE_LOOP('',(#93265,#93266,#93267,#93268)); +#93265 = ORIENTED_EDGE('',*,*,#92783,.F.); +#93266 = ORIENTED_EDGE('',*,*,#80823,.T.); +#93267 = ORIENTED_EDGE('',*,*,#92735,.F.); +#93268 = ORIENTED_EDGE('',*,*,#92809,.F.); +#93269 = CYLINDRICAL_SURFACE('',#93270,0.2); +#93270 = AXIS2_PLACEMENT_3D('',#93271,#93272,#93273); +#93271 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93272 = DIRECTION('',(-1.,0.,0.)); +#93273 = DIRECTION('',(0.,0.,1.)); +#93274 = ADVANCED_FACE('',(#93275),#93281,.T.); +#93275 = FACE_BOUND('',#93276,.T.); +#93276 = EDGE_LOOP('',(#93277,#93278,#93279,#93280)); +#93277 = ORIENTED_EDGE('',*,*,#92914,.F.); +#93278 = ORIENTED_EDGE('',*,*,#80791,.T.); +#93279 = ORIENTED_EDGE('',*,*,#92866,.F.); +#93280 = ORIENTED_EDGE('',*,*,#92940,.F.); +#93281 = CYLINDRICAL_SURFACE('',#93282,0.2); +#93282 = AXIS2_PLACEMENT_3D('',#93283,#93284,#93285); +#93283 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93284 = DIRECTION('',(-1.,0.,0.)); +#93285 = DIRECTION('',(0.,0.,1.)); +#93286 = ADVANCED_FACE('',(#93287),#93293,.T.); +#93287 = FACE_BOUND('',#93288,.T.); +#93288 = EDGE_LOOP('',(#93289,#93290,#93291,#93292)); +#93289 = ORIENTED_EDGE('',*,*,#91997,.F.); +#93290 = ORIENTED_EDGE('',*,*,#80759,.T.); +#93291 = ORIENTED_EDGE('',*,*,#91949,.F.); +#93292 = ORIENTED_EDGE('',*,*,#92023,.F.); +#93293 = CYLINDRICAL_SURFACE('',#93294,0.2); +#93294 = AXIS2_PLACEMENT_3D('',#93295,#93296,#93297); +#93295 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93296 = DIRECTION('',(1.,0.,0.)); +#93297 = DIRECTION('',(0.,0.,-1.)); +#93298 = ADVANCED_FACE('',(#93299),#93305,.T.); +#93299 = FACE_BOUND('',#93300,.T.); +#93300 = EDGE_LOOP('',(#93301,#93302,#93303,#93304)); +#93301 = ORIENTED_EDGE('',*,*,#92128,.F.); +#93302 = ORIENTED_EDGE('',*,*,#80727,.T.); +#93303 = ORIENTED_EDGE('',*,*,#92080,.F.); +#93304 = ORIENTED_EDGE('',*,*,#92154,.F.); +#93305 = CYLINDRICAL_SURFACE('',#93306,0.2); +#93306 = AXIS2_PLACEMENT_3D('',#93307,#93308,#93309); +#93307 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93308 = DIRECTION('',(1.,0.,0.)); +#93309 = DIRECTION('',(0.,0.,-1.)); +#93310 = ADVANCED_FACE('',(#93311),#93317,.T.); +#93311 = FACE_BOUND('',#93312,.T.); +#93312 = EDGE_LOOP('',(#93313,#93314,#93315,#93316)); +#93313 = ORIENTED_EDGE('',*,*,#92259,.F.); +#93314 = ORIENTED_EDGE('',*,*,#80695,.T.); +#93315 = ORIENTED_EDGE('',*,*,#92211,.F.); +#93316 = ORIENTED_EDGE('',*,*,#92285,.F.); +#93317 = CYLINDRICAL_SURFACE('',#93318,0.2); +#93318 = AXIS2_PLACEMENT_3D('',#93319,#93320,#93321); +#93319 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93320 = DIRECTION('',(1.,0.,0.)); +#93321 = DIRECTION('',(0.,0.,-1.)); +#93322 = ADVANCED_FACE('',(#93323),#93329,.T.); +#93323 = FACE_BOUND('',#93324,.T.); +#93324 = EDGE_LOOP('',(#93325,#93326,#93327,#93328)); +#93325 = ORIENTED_EDGE('',*,*,#92390,.F.); +#93326 = ORIENTED_EDGE('',*,*,#80663,.T.); +#93327 = ORIENTED_EDGE('',*,*,#92342,.F.); +#93328 = ORIENTED_EDGE('',*,*,#92416,.F.); +#93329 = CYLINDRICAL_SURFACE('',#93330,0.2); +#93330 = AXIS2_PLACEMENT_3D('',#93331,#93332,#93333); +#93331 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93332 = DIRECTION('',(1.,0.,0.)); +#93333 = DIRECTION('',(0.,0.,-1.)); +#93334 = ADVANCED_FACE('',(#93335),#93341,.T.); +#93335 = FACE_BOUND('',#93336,.T.); +#93336 = EDGE_LOOP('',(#93337,#93338,#93339,#93340)); +#93337 = ORIENTED_EDGE('',*,*,#91866,.F.); +#93338 = ORIENTED_EDGE('',*,*,#80631,.T.); +#93339 = ORIENTED_EDGE('',*,*,#91818,.F.); +#93340 = ORIENTED_EDGE('',*,*,#91892,.F.); +#93341 = CYLINDRICAL_SURFACE('',#93342,0.2); +#93342 = AXIS2_PLACEMENT_3D('',#93343,#93344,#93345); +#93343 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93344 = DIRECTION('',(-1.,0.,0.)); +#93345 = DIRECTION('',(0.,0.,1.)); +#93346 = ADVANCED_FACE('',(#93347),#93353,.T.); +#93347 = FACE_BOUND('',#93348,.T.); +#93348 = EDGE_LOOP('',(#93349,#93350,#93351,#93352)); +#93349 = ORIENTED_EDGE('',*,*,#91678,.F.); +#93350 = ORIENTED_EDGE('',*,*,#80599,.T.); +#93351 = ORIENTED_EDGE('',*,*,#91720,.F.); +#93352 = ORIENTED_EDGE('',*,*,#91761,.F.); +#93353 = CYLINDRICAL_SURFACE('',#93354,0.2); +#93354 = AXIS2_PLACEMENT_3D('',#93355,#93356,#93357); +#93355 = CARTESIAN_POINT('',(0.,-4.45,0.2)); +#93356 = DIRECTION('',(1.,0.,0.)); +#93357 = DIRECTION('',(0.,0.,-1.)); +#93358 = ADVANCED_FACE('',(#93359),#93384,.F.); +#93359 = FACE_BOUND('',#93360,.T.); +#93360 = EDGE_LOOP('',(#93361,#93362,#93370,#93378)); +#93361 = ORIENTED_EDGE('',*,*,#80331,.T.); +#93362 = ORIENTED_EDGE('',*,*,#93363,.F.); +#93363 = EDGE_CURVE('',#93364,#80334,#93366,.T.); +#93364 = VERTEX_POINT('',#93365); +#93365 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.96)); +#93366 = LINE('',#93367,#93368); +#93367 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.96)); +#93368 = VECTOR('',#93369,1.); +#93369 = DIRECTION('',(-0.,-0.,-1.)); +#93370 = ORIENTED_EDGE('',*,*,#93371,.F.); +#93371 = EDGE_CURVE('',#93372,#93364,#93374,.T.); +#93372 = VERTEX_POINT('',#93373); +#93373 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.96)); +#93374 = LINE('',#93375,#93376); +#93375 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.96)); +#93376 = VECTOR('',#93377,1.); +#93377 = DIRECTION('',(-3.469446951954E-16,1.,-0.)); +#93378 = ORIENTED_EDGE('',*,*,#93379,.T.); +#93379 = EDGE_CURVE('',#93372,#80332,#93380,.T.); +#93380 = LINE('',#93381,#93382); +#93381 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.96)); +#93382 = VECTOR('',#93383,1.); +#93383 = DIRECTION('',(-0.,-0.,-1.)); +#93384 = PLANE('',#93385); +#93385 = AXIS2_PLACEMENT_3D('',#93386,#93387,#93388); +#93386 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.96)); +#93387 = DIRECTION('',(-1.,-3.469446951954E-16,0.)); +#93388 = DIRECTION('',(3.469446951954E-16,-1.,0.)); +#93389 = ADVANCED_FACE('',(#93390),#93408,.F.); +#93390 = FACE_BOUND('',#93391,.T.); +#93391 = EDGE_LOOP('',(#93392,#93393,#93401,#93407)); +#93392 = ORIENTED_EDGE('',*,*,#80357,.T.); +#93393 = ORIENTED_EDGE('',*,*,#93394,.F.); +#93394 = EDGE_CURVE('',#93395,#80350,#93397,.T.); +#93395 = VERTEX_POINT('',#93396); +#93396 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93397 = LINE('',#93398,#93399); +#93398 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93399 = VECTOR('',#93400,1.); +#93400 = DIRECTION('',(-0.,-0.,-1.)); +#93401 = ORIENTED_EDGE('',*,*,#93402,.F.); +#93402 = EDGE_CURVE('',#93364,#93395,#93403,.T.); +#93403 = LINE('',#93404,#93405); +#93404 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93405 = VECTOR('',#93406,1.); +#93406 = DIRECTION('',(-1.,-0.,-0.)); +#93407 = ORIENTED_EDGE('',*,*,#93363,.T.); +#93408 = PLANE('',#93409); +#93409 = AXIS2_PLACEMENT_3D('',#93410,#93411,#93412); +#93410 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93411 = DIRECTION('',(0.,-1.,0.)); +#93412 = DIRECTION('',(0.,-0.,-1.)); +#93413 = ADVANCED_FACE('',(#93414),#93432,.F.); +#93414 = FACE_BOUND('',#93415,.T.); +#93415 = EDGE_LOOP('',(#93416,#93417,#93425,#93431)); +#93416 = ORIENTED_EDGE('',*,*,#80349,.T.); +#93417 = ORIENTED_EDGE('',*,*,#93418,.F.); +#93418 = EDGE_CURVE('',#93419,#80342,#93421,.T.); +#93419 = VERTEX_POINT('',#93420); +#93420 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.96)); +#93421 = LINE('',#93422,#93423); +#93422 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.96)); +#93423 = VECTOR('',#93424,1.); +#93424 = DIRECTION('',(-0.,-0.,-1.)); +#93425 = ORIENTED_EDGE('',*,*,#93426,.F.); +#93426 = EDGE_CURVE('',#93395,#93419,#93427,.T.); +#93427 = LINE('',#93428,#93429); +#93428 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93429 = VECTOR('',#93430,1.); +#93430 = DIRECTION('',(-1.734723475977E-16,-1.,0.)); +#93431 = ORIENTED_EDGE('',*,*,#93394,.T.); +#93432 = PLANE('',#93433); +#93433 = AXIS2_PLACEMENT_3D('',#93434,#93435,#93436); +#93434 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.96)); +#93435 = DIRECTION('',(1.,-1.734723475977E-16,0.)); +#93436 = DIRECTION('',(1.734723475977E-16,1.,0.)); +#93437 = ADVANCED_FACE('',(#93438),#93449,.F.); +#93438 = FACE_BOUND('',#93439,.T.); +#93439 = EDGE_LOOP('',(#93440,#93441,#93442,#93448)); +#93440 = ORIENTED_EDGE('',*,*,#80341,.T.); +#93441 = ORIENTED_EDGE('',*,*,#93379,.F.); +#93442 = ORIENTED_EDGE('',*,*,#93443,.F.); +#93443 = EDGE_CURVE('',#93419,#93372,#93444,.T.); +#93444 = LINE('',#93445,#93446); +#93445 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.96)); +#93446 = VECTOR('',#93447,1.); +#93447 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#93448 = ORIENTED_EDGE('',*,*,#93418,.T.); +#93449 = PLANE('',#93450); +#93450 = AXIS2_PLACEMENT_3D('',#93451,#93452,#93453); +#93451 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.96)); +#93452 = DIRECTION('',(-1.807003620809E-16,1.,0.)); +#93453 = DIRECTION('',(-1.,-1.807003620809E-16,0.)); +#93454 = ADVANCED_FACE('',(#93455),#93461,.T.); +#93455 = FACE_BOUND('',#93456,.T.); +#93456 = EDGE_LOOP('',(#93457,#93458,#93459,#93460)); +#93457 = ORIENTED_EDGE('',*,*,#93371,.T.); +#93458 = ORIENTED_EDGE('',*,*,#93402,.T.); +#93459 = ORIENTED_EDGE('',*,*,#93426,.T.); +#93460 = ORIENTED_EDGE('',*,*,#93443,.T.); +#93461 = PLANE('',#93462); +#93462 = AXIS2_PLACEMENT_3D('',#93463,#93464,#93465); +#93463 = CARTESIAN_POINT('',(0.,0.,1.96)); +#93464 = DIRECTION('',(-0.,0.,1.)); +#93465 = DIRECTION('',(1.,0.,0.)); +#93466 = ADVANCED_FACE('',(#93467),#93492,.F.); +#93467 = FACE_BOUND('',#93468,.T.); +#93468 = EDGE_LOOP('',(#93469,#93470,#93478,#93486)); +#93469 = ORIENTED_EDGE('',*,*,#80399,.T.); +#93470 = ORIENTED_EDGE('',*,*,#93471,.F.); +#93471 = EDGE_CURVE('',#93472,#80402,#93474,.T.); +#93472 = VERTEX_POINT('',#93473); +#93473 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.96)); +#93474 = LINE('',#93475,#93476); +#93475 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.96)); +#93476 = VECTOR('',#93477,1.); +#93477 = DIRECTION('',(-0.,-0.,-1.)); +#93478 = ORIENTED_EDGE('',*,*,#93479,.F.); +#93479 = EDGE_CURVE('',#93480,#93472,#93482,.T.); +#93480 = VERTEX_POINT('',#93481); +#93481 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.96)); +#93482 = LINE('',#93483,#93484); +#93483 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.96)); +#93484 = VECTOR('',#93485,1.); +#93485 = DIRECTION('',(0.,1.,0.)); +#93486 = ORIENTED_EDGE('',*,*,#93487,.T.); +#93487 = EDGE_CURVE('',#93480,#80400,#93488,.T.); +#93488 = LINE('',#93489,#93490); +#93489 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.96)); +#93490 = VECTOR('',#93491,1.); +#93491 = DIRECTION('',(-0.,-0.,-1.)); +#93492 = PLANE('',#93493); +#93493 = AXIS2_PLACEMENT_3D('',#93494,#93495,#93496); +#93494 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.96)); +#93495 = DIRECTION('',(-1.,0.,0.)); +#93496 = DIRECTION('',(0.,0.,1.)); +#93497 = ADVANCED_FACE('',(#93498),#93516,.F.); +#93498 = FACE_BOUND('',#93499,.T.); +#93499 = EDGE_LOOP('',(#93500,#93501,#93509,#93515)); +#93500 = ORIENTED_EDGE('',*,*,#80425,.T.); +#93501 = ORIENTED_EDGE('',*,*,#93502,.F.); +#93502 = EDGE_CURVE('',#93503,#80418,#93505,.T.); +#93503 = VERTEX_POINT('',#93504); +#93504 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.96)); +#93505 = LINE('',#93506,#93507); +#93506 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.96)); +#93507 = VECTOR('',#93508,1.); +#93508 = DIRECTION('',(-0.,-0.,-1.)); +#93509 = ORIENTED_EDGE('',*,*,#93510,.F.); +#93510 = EDGE_CURVE('',#93472,#93503,#93511,.T.); +#93511 = LINE('',#93512,#93513); +#93512 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.96)); +#93513 = VECTOR('',#93514,1.); +#93514 = DIRECTION('',(-1.,-0.,-0.)); +#93515 = ORIENTED_EDGE('',*,*,#93471,.T.); +#93516 = PLANE('',#93517); +#93517 = AXIS2_PLACEMENT_3D('',#93518,#93519,#93520); +#93518 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.96)); +#93519 = DIRECTION('',(0.,-1.,0.)); +#93520 = DIRECTION('',(0.,-0.,-1.)); +#93521 = ADVANCED_FACE('',(#93522),#93540,.F.); +#93522 = FACE_BOUND('',#93523,.T.); +#93523 = EDGE_LOOP('',(#93524,#93525,#93533,#93539)); +#93524 = ORIENTED_EDGE('',*,*,#80417,.T.); +#93525 = ORIENTED_EDGE('',*,*,#93526,.F.); +#93526 = EDGE_CURVE('',#93527,#80410,#93529,.T.); +#93527 = VERTEX_POINT('',#93528); +#93528 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93529 = LINE('',#93530,#93531); +#93530 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93531 = VECTOR('',#93532,1.); +#93532 = DIRECTION('',(-0.,-0.,-1.)); +#93533 = ORIENTED_EDGE('',*,*,#93534,.F.); +#93534 = EDGE_CURVE('',#93503,#93527,#93535,.T.); +#93535 = LINE('',#93536,#93537); +#93536 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93537 = VECTOR('',#93538,1.); +#93538 = DIRECTION('',(-0.,-1.,-0.)); +#93539 = ORIENTED_EDGE('',*,*,#93502,.T.); +#93540 = PLANE('',#93541); +#93541 = AXIS2_PLACEMENT_3D('',#93542,#93543,#93544); +#93542 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93543 = DIRECTION('',(1.,0.,0.)); +#93544 = DIRECTION('',(0.,0.,-1.)); +#93545 = ADVANCED_FACE('',(#93546),#93557,.F.); +#93546 = FACE_BOUND('',#93547,.T.); +#93547 = EDGE_LOOP('',(#93548,#93549,#93550,#93556)); +#93548 = ORIENTED_EDGE('',*,*,#80409,.T.); +#93549 = ORIENTED_EDGE('',*,*,#93487,.F.); +#93550 = ORIENTED_EDGE('',*,*,#93551,.F.); +#93551 = EDGE_CURVE('',#93527,#93480,#93552,.T.); +#93552 = LINE('',#93553,#93554); +#93553 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93554 = VECTOR('',#93555,1.); +#93555 = DIRECTION('',(1.,0.,0.)); +#93556 = ORIENTED_EDGE('',*,*,#93526,.T.); +#93557 = PLANE('',#93558); +#93558 = AXIS2_PLACEMENT_3D('',#93559,#93560,#93561); +#93559 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.96)); +#93560 = DIRECTION('',(0.,1.,0.)); +#93561 = DIRECTION('',(0.,-0.,1.)); +#93562 = ADVANCED_FACE('',(#93563),#93569,.F.); +#93563 = FACE_BOUND('',#93564,.T.); +#93564 = EDGE_LOOP('',(#93565,#93566,#93567,#93568)); +#93565 = ORIENTED_EDGE('',*,*,#93479,.T.); +#93566 = ORIENTED_EDGE('',*,*,#93510,.T.); +#93567 = ORIENTED_EDGE('',*,*,#93534,.T.); +#93568 = ORIENTED_EDGE('',*,*,#93551,.T.); +#93569 = PLANE('',#93570); +#93570 = AXIS2_PLACEMENT_3D('',#93571,#93572,#93573); +#93571 = CARTESIAN_POINT('',(0.,0.,1.96)); +#93572 = DIRECTION('',(0.,0.,-1.)); +#93573 = DIRECTION('',(-1.,0.,-0.)); +#93574 = ADVANCED_FACE('',(#93575),#93600,.F.); +#93575 = FACE_BOUND('',#93576,.T.); +#93576 = EDGE_LOOP('',(#93577,#93578,#93586,#93594)); +#93577 = ORIENTED_EDGE('',*,*,#80297,.T.); +#93578 = ORIENTED_EDGE('',*,*,#93579,.F.); +#93579 = EDGE_CURVE('',#93580,#80300,#93582,.T.); +#93580 = VERTEX_POINT('',#93581); +#93581 = CARTESIAN_POINT('',(1.375,1.852187257439,1.96)); +#93582 = LINE('',#93583,#93584); +#93583 = CARTESIAN_POINT('',(1.375,1.852187257439,1.96)); +#93584 = VECTOR('',#93585,1.); +#93585 = DIRECTION('',(-0.,-0.,-1.)); +#93586 = ORIENTED_EDGE('',*,*,#93587,.F.); +#93587 = EDGE_CURVE('',#93588,#93580,#93590,.T.); +#93588 = VERTEX_POINT('',#93589); +#93589 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93590 = LINE('',#93591,#93592); +#93591 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93592 = VECTOR('',#93593,1.); +#93593 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#93594 = ORIENTED_EDGE('',*,*,#93595,.T.); +#93595 = EDGE_CURVE('',#93588,#80298,#93596,.T.); +#93596 = LINE('',#93597,#93598); +#93597 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93598 = VECTOR('',#93599,1.); +#93599 = DIRECTION('',(-0.,-0.,-1.)); +#93600 = PLANE('',#93601); +#93601 = AXIS2_PLACEMENT_3D('',#93602,#93603,#93604); +#93602 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93603 = DIRECTION('',(-1.,-3.469446951954E-16,0.)); +#93604 = DIRECTION('',(3.469446951954E-16,-1.,0.)); +#93605 = ADVANCED_FACE('',(#93606),#93624,.F.); +#93606 = FACE_BOUND('',#93607,.T.); +#93607 = EDGE_LOOP('',(#93608,#93609,#93617,#93623)); +#93608 = ORIENTED_EDGE('',*,*,#80323,.T.); +#93609 = ORIENTED_EDGE('',*,*,#93610,.F.); +#93610 = EDGE_CURVE('',#93611,#80316,#93613,.T.); +#93611 = VERTEX_POINT('',#93612); +#93612 = CARTESIAN_POINT('',(1.125,1.852187257439,1.96)); +#93613 = LINE('',#93614,#93615); +#93614 = CARTESIAN_POINT('',(1.125,1.852187257439,1.96)); +#93615 = VECTOR('',#93616,1.); +#93616 = DIRECTION('',(-0.,-0.,-1.)); +#93617 = ORIENTED_EDGE('',*,*,#93618,.F.); +#93618 = EDGE_CURVE('',#93580,#93611,#93619,.T.); +#93619 = LINE('',#93620,#93621); +#93620 = CARTESIAN_POINT('',(1.375,1.852187257439,1.96)); +#93621 = VECTOR('',#93622,1.); +#93622 = DIRECTION('',(-1.,0.,0.)); +#93623 = ORIENTED_EDGE('',*,*,#93579,.T.); +#93624 = PLANE('',#93625); +#93625 = AXIS2_PLACEMENT_3D('',#93626,#93627,#93628); +#93626 = CARTESIAN_POINT('',(1.375,1.852187257439,1.96)); +#93627 = DIRECTION('',(0.,-1.,0.)); +#93628 = DIRECTION('',(0.,-0.,-1.)); +#93629 = ADVANCED_FACE('',(#93630),#93648,.F.); +#93630 = FACE_BOUND('',#93631,.T.); +#93631 = EDGE_LOOP('',(#93632,#93633,#93641,#93647)); +#93632 = ORIENTED_EDGE('',*,*,#80315,.T.); +#93633 = ORIENTED_EDGE('',*,*,#93634,.F.); +#93634 = EDGE_CURVE('',#93635,#80308,#93637,.T.); +#93635 = VERTEX_POINT('',#93636); +#93636 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.96)); +#93637 = LINE('',#93638,#93639); +#93638 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.96)); +#93639 = VECTOR('',#93640,1.); +#93640 = DIRECTION('',(-0.,-0.,-1.)); +#93641 = ORIENTED_EDGE('',*,*,#93642,.F.); +#93642 = EDGE_CURVE('',#93611,#93635,#93643,.T.); +#93643 = LINE('',#93644,#93645); +#93644 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.96)); +#93645 = VECTOR('',#93646,1.); +#93646 = DIRECTION('',(3.469446951954E-16,-1.,-0.)); +#93647 = ORIENTED_EDGE('',*,*,#93610,.T.); +#93648 = PLANE('',#93649); +#93649 = AXIS2_PLACEMENT_3D('',#93650,#93651,#93652); +#93650 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.96)); +#93651 = DIRECTION('',(1.,3.469446951954E-16,-0.)); +#93652 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#93653 = ADVANCED_FACE('',(#93654),#93665,.F.); +#93654 = FACE_BOUND('',#93655,.T.); +#93655 = EDGE_LOOP('',(#93656,#93657,#93658,#93664)); +#93656 = ORIENTED_EDGE('',*,*,#80307,.T.); +#93657 = ORIENTED_EDGE('',*,*,#93595,.F.); +#93658 = ORIENTED_EDGE('',*,*,#93659,.F.); +#93659 = EDGE_CURVE('',#93635,#93588,#93660,.T.); +#93660 = LINE('',#93661,#93662); +#93661 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93662 = VECTOR('',#93663,1.); +#93663 = DIRECTION('',(1.,-0.,-0.)); +#93664 = ORIENTED_EDGE('',*,*,#93634,.T.); +#93665 = PLANE('',#93666); +#93666 = AXIS2_PLACEMENT_3D('',#93667,#93668,#93669); +#93667 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.96)); +#93668 = DIRECTION('',(0.,1.,-0.)); +#93669 = DIRECTION('',(0.,0.,1.)); +#93670 = ADVANCED_FACE('',(#93671),#93677,.T.); +#93671 = FACE_BOUND('',#93672,.T.); +#93672 = EDGE_LOOP('',(#93673,#93674,#93675,#93676)); +#93673 = ORIENTED_EDGE('',*,*,#93587,.T.); +#93674 = ORIENTED_EDGE('',*,*,#93618,.T.); +#93675 = ORIENTED_EDGE('',*,*,#93642,.T.); +#93676 = ORIENTED_EDGE('',*,*,#93659,.T.); +#93677 = PLANE('',#93678); +#93678 = AXIS2_PLACEMENT_3D('',#93679,#93680,#93681); +#93679 = CARTESIAN_POINT('',(0.,0.,1.96)); +#93680 = DIRECTION('',(0.,0.,1.)); +#93681 = DIRECTION('',(1.,0.,-0.)); +#93682 = ADVANCED_FACE('',(#93683),#93708,.F.); +#93683 = FACE_BOUND('',#93684,.T.); +#93684 = EDGE_LOOP('',(#93685,#93686,#93694,#93702)); +#93685 = ORIENTED_EDGE('',*,*,#80433,.T.); +#93686 = ORIENTED_EDGE('',*,*,#93687,.F.); +#93687 = EDGE_CURVE('',#93688,#80436,#93690,.T.); +#93688 = VERTEX_POINT('',#93689); +#93689 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.96)); +#93690 = LINE('',#93691,#93692); +#93691 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.96)); +#93692 = VECTOR('',#93693,1.); +#93693 = DIRECTION('',(-0.,-0.,-1.)); +#93694 = ORIENTED_EDGE('',*,*,#93695,.F.); +#93695 = EDGE_CURVE('',#93696,#93688,#93698,.T.); +#93696 = VERTEX_POINT('',#93697); +#93697 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.96)); +#93698 = LINE('',#93699,#93700); +#93699 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.96)); +#93700 = VECTOR('',#93701,1.); +#93701 = DIRECTION('',(0.,1.,0.)); +#93702 = ORIENTED_EDGE('',*,*,#93703,.T.); +#93703 = EDGE_CURVE('',#93696,#80434,#93704,.T.); +#93704 = LINE('',#93705,#93706); +#93705 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.96)); +#93706 = VECTOR('',#93707,1.); +#93707 = DIRECTION('',(-0.,-0.,-1.)); +#93708 = PLANE('',#93709); +#93709 = AXIS2_PLACEMENT_3D('',#93710,#93711,#93712); +#93710 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.96)); +#93711 = DIRECTION('',(-1.,0.,0.)); +#93712 = DIRECTION('',(0.,0.,1.)); +#93713 = ADVANCED_FACE('',(#93714),#93732,.F.); +#93714 = FACE_BOUND('',#93715,.T.); +#93715 = EDGE_LOOP('',(#93716,#93717,#93725,#93731)); +#93716 = ORIENTED_EDGE('',*,*,#80459,.T.); +#93717 = ORIENTED_EDGE('',*,*,#93718,.F.); +#93718 = EDGE_CURVE('',#93719,#80452,#93721,.T.); +#93719 = VERTEX_POINT('',#93720); +#93720 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.96)); +#93721 = LINE('',#93722,#93723); +#93722 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.96)); +#93723 = VECTOR('',#93724,1.); +#93724 = DIRECTION('',(-0.,-0.,-1.)); +#93725 = ORIENTED_EDGE('',*,*,#93726,.F.); +#93726 = EDGE_CURVE('',#93688,#93719,#93727,.T.); +#93727 = LINE('',#93728,#93729); +#93728 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.96)); +#93729 = VECTOR('',#93730,1.); +#93730 = DIRECTION('',(-1.,-0.,-0.)); +#93731 = ORIENTED_EDGE('',*,*,#93687,.T.); +#93732 = PLANE('',#93733); +#93733 = AXIS2_PLACEMENT_3D('',#93734,#93735,#93736); +#93734 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.96)); +#93735 = DIRECTION('',(0.,-1.,0.)); +#93736 = DIRECTION('',(0.,-0.,-1.)); +#93737 = ADVANCED_FACE('',(#93738),#93756,.F.); +#93738 = FACE_BOUND('',#93739,.T.); +#93739 = EDGE_LOOP('',(#93740,#93741,#93749,#93755)); +#93740 = ORIENTED_EDGE('',*,*,#80451,.T.); +#93741 = ORIENTED_EDGE('',*,*,#93742,.F.); +#93742 = EDGE_CURVE('',#93743,#80444,#93745,.T.); +#93743 = VERTEX_POINT('',#93744); +#93744 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93745 = LINE('',#93746,#93747); +#93746 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93747 = VECTOR('',#93748,1.); +#93748 = DIRECTION('',(-0.,-0.,-1.)); +#93749 = ORIENTED_EDGE('',*,*,#93750,.F.); +#93750 = EDGE_CURVE('',#93719,#93743,#93751,.T.); +#93751 = LINE('',#93752,#93753); +#93752 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93753 = VECTOR('',#93754,1.); +#93754 = DIRECTION('',(-0.,-1.,-0.)); +#93755 = ORIENTED_EDGE('',*,*,#93718,.T.); +#93756 = PLANE('',#93757); +#93757 = AXIS2_PLACEMENT_3D('',#93758,#93759,#93760); +#93758 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93759 = DIRECTION('',(1.,0.,0.)); +#93760 = DIRECTION('',(0.,0.,-1.)); +#93761 = ADVANCED_FACE('',(#93762),#93773,.F.); +#93762 = FACE_BOUND('',#93763,.T.); +#93763 = EDGE_LOOP('',(#93764,#93765,#93766,#93772)); +#93764 = ORIENTED_EDGE('',*,*,#80443,.T.); +#93765 = ORIENTED_EDGE('',*,*,#93703,.F.); +#93766 = ORIENTED_EDGE('',*,*,#93767,.F.); +#93767 = EDGE_CURVE('',#93743,#93696,#93768,.T.); +#93768 = LINE('',#93769,#93770); +#93769 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93770 = VECTOR('',#93771,1.); +#93771 = DIRECTION('',(1.,0.,0.)); +#93772 = ORIENTED_EDGE('',*,*,#93742,.T.); +#93773 = PLANE('',#93774); +#93774 = AXIS2_PLACEMENT_3D('',#93775,#93776,#93777); +#93775 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.96)); +#93776 = DIRECTION('',(0.,1.,0.)); +#93777 = DIRECTION('',(0.,-0.,1.)); +#93778 = ADVANCED_FACE('',(#93779),#93785,.F.); +#93779 = FACE_BOUND('',#93780,.T.); +#93780 = EDGE_LOOP('',(#93781,#93782,#93783,#93784)); +#93781 = ORIENTED_EDGE('',*,*,#93695,.T.); +#93782 = ORIENTED_EDGE('',*,*,#93726,.T.); +#93783 = ORIENTED_EDGE('',*,*,#93750,.T.); +#93784 = ORIENTED_EDGE('',*,*,#93767,.T.); +#93785 = PLANE('',#93786); +#93786 = AXIS2_PLACEMENT_3D('',#93787,#93788,#93789); +#93787 = CARTESIAN_POINT('',(0.,0.,1.96)); +#93788 = DIRECTION('',(0.,0.,-1.)); +#93789 = DIRECTION('',(-1.,0.,-0.)); +#93790 = ADVANCED_FACE('',(#93791),#93816,.F.); +#93791 = FACE_BOUND('',#93792,.T.); +#93792 = EDGE_LOOP('',(#93793,#93794,#93802,#93810)); +#93793 = ORIENTED_EDGE('',*,*,#80263,.T.); +#93794 = ORIENTED_EDGE('',*,*,#93795,.F.); +#93795 = EDGE_CURVE('',#93796,#80266,#93798,.T.); +#93796 = VERTEX_POINT('',#93797); +#93797 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.96)); +#93798 = LINE('',#93799,#93800); +#93799 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.96)); +#93800 = VECTOR('',#93801,1.); +#93801 = DIRECTION('',(-0.,-0.,-1.)); +#93802 = ORIENTED_EDGE('',*,*,#93803,.F.); +#93803 = EDGE_CURVE('',#93804,#93796,#93806,.T.); +#93804 = VERTEX_POINT('',#93805); +#93805 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.96)); +#93806 = LINE('',#93807,#93808); +#93807 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.96)); +#93808 = VECTOR('',#93809,1.); +#93809 = DIRECTION('',(0.,1.,0.)); +#93810 = ORIENTED_EDGE('',*,*,#93811,.T.); +#93811 = EDGE_CURVE('',#93804,#80264,#93812,.T.); +#93812 = LINE('',#93813,#93814); +#93813 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.96)); +#93814 = VECTOR('',#93815,1.); +#93815 = DIRECTION('',(-0.,-0.,-1.)); +#93816 = PLANE('',#93817); +#93817 = AXIS2_PLACEMENT_3D('',#93818,#93819,#93820); +#93818 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.96)); +#93819 = DIRECTION('',(-1.,0.,0.)); +#93820 = DIRECTION('',(0.,0.,1.)); +#93821 = ADVANCED_FACE('',(#93822),#93840,.F.); +#93822 = FACE_BOUND('',#93823,.T.); +#93823 = EDGE_LOOP('',(#93824,#93825,#93833,#93839)); +#93824 = ORIENTED_EDGE('',*,*,#80289,.T.); +#93825 = ORIENTED_EDGE('',*,*,#93826,.F.); +#93826 = EDGE_CURVE('',#93827,#80282,#93829,.T.); +#93827 = VERTEX_POINT('',#93828); +#93828 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.96)); +#93829 = LINE('',#93830,#93831); +#93830 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.96)); +#93831 = VECTOR('',#93832,1.); +#93832 = DIRECTION('',(-0.,-0.,-1.)); +#93833 = ORIENTED_EDGE('',*,*,#93834,.F.); +#93834 = EDGE_CURVE('',#93796,#93827,#93835,.T.); +#93835 = LINE('',#93836,#93837); +#93836 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.96)); +#93837 = VECTOR('',#93838,1.); +#93838 = DIRECTION('',(-1.,-0.,-0.)); +#93839 = ORIENTED_EDGE('',*,*,#93795,.T.); +#93840 = PLANE('',#93841); +#93841 = AXIS2_PLACEMENT_3D('',#93842,#93843,#93844); +#93842 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.96)); +#93843 = DIRECTION('',(0.,-1.,0.)); +#93844 = DIRECTION('',(0.,-0.,-1.)); +#93845 = ADVANCED_FACE('',(#93846),#93864,.F.); +#93846 = FACE_BOUND('',#93847,.T.); +#93847 = EDGE_LOOP('',(#93848,#93849,#93857,#93863)); +#93848 = ORIENTED_EDGE('',*,*,#80281,.T.); +#93849 = ORIENTED_EDGE('',*,*,#93850,.F.); +#93850 = EDGE_CURVE('',#93851,#80274,#93853,.T.); +#93851 = VERTEX_POINT('',#93852); +#93852 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93853 = LINE('',#93854,#93855); +#93854 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93855 = VECTOR('',#93856,1.); +#93856 = DIRECTION('',(-0.,-0.,-1.)); +#93857 = ORIENTED_EDGE('',*,*,#93858,.F.); +#93858 = EDGE_CURVE('',#93827,#93851,#93859,.T.); +#93859 = LINE('',#93860,#93861); +#93860 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93861 = VECTOR('',#93862,1.); +#93862 = DIRECTION('',(-0.,-1.,-0.)); +#93863 = ORIENTED_EDGE('',*,*,#93826,.T.); +#93864 = PLANE('',#93865); +#93865 = AXIS2_PLACEMENT_3D('',#93866,#93867,#93868); +#93866 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93867 = DIRECTION('',(1.,0.,0.)); +#93868 = DIRECTION('',(0.,0.,-1.)); +#93869 = ADVANCED_FACE('',(#93870),#93881,.F.); +#93870 = FACE_BOUND('',#93871,.T.); +#93871 = EDGE_LOOP('',(#93872,#93873,#93874,#93880)); +#93872 = ORIENTED_EDGE('',*,*,#80273,.T.); +#93873 = ORIENTED_EDGE('',*,*,#93811,.F.); +#93874 = ORIENTED_EDGE('',*,*,#93875,.F.); +#93875 = EDGE_CURVE('',#93851,#93804,#93876,.T.); +#93876 = LINE('',#93877,#93878); +#93877 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93878 = VECTOR('',#93879,1.); +#93879 = DIRECTION('',(1.,0.,0.)); +#93880 = ORIENTED_EDGE('',*,*,#93850,.T.); +#93881 = PLANE('',#93882); +#93882 = AXIS2_PLACEMENT_3D('',#93883,#93884,#93885); +#93883 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.96)); +#93884 = DIRECTION('',(0.,1.,0.)); +#93885 = DIRECTION('',(0.,-0.,1.)); +#93886 = ADVANCED_FACE('',(#93887),#93893,.F.); +#93887 = FACE_BOUND('',#93888,.T.); +#93888 = EDGE_LOOP('',(#93889,#93890,#93891,#93892)); +#93889 = ORIENTED_EDGE('',*,*,#93803,.T.); +#93890 = ORIENTED_EDGE('',*,*,#93834,.T.); +#93891 = ORIENTED_EDGE('',*,*,#93858,.T.); +#93892 = ORIENTED_EDGE('',*,*,#93875,.T.); +#93893 = PLANE('',#93894); +#93894 = AXIS2_PLACEMENT_3D('',#93895,#93896,#93897); +#93895 = CARTESIAN_POINT('',(0.,0.,1.96)); +#93896 = DIRECTION('',(0.,0.,-1.)); +#93897 = DIRECTION('',(-1.,0.,-0.)); +#93898 = ADVANCED_FACE('',(#93899),#93924,.F.); +#93899 = FACE_BOUND('',#93900,.T.); +#93900 = EDGE_LOOP('',(#93901,#93902,#93910,#93918)); +#93901 = ORIENTED_EDGE('',*,*,#80467,.T.); +#93902 = ORIENTED_EDGE('',*,*,#93903,.F.); +#93903 = EDGE_CURVE('',#93904,#80470,#93906,.T.); +#93904 = VERTEX_POINT('',#93905); +#93905 = CARTESIAN_POINT('',(0.875,1.852187257439,1.96)); +#93906 = LINE('',#93907,#93908); +#93907 = CARTESIAN_POINT('',(0.875,1.852187257439,1.96)); +#93908 = VECTOR('',#93909,1.); +#93909 = DIRECTION('',(-0.,-0.,-1.)); +#93910 = ORIENTED_EDGE('',*,*,#93911,.F.); +#93911 = EDGE_CURVE('',#93912,#93904,#93914,.T.); +#93912 = VERTEX_POINT('',#93913); +#93913 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93914 = LINE('',#93915,#93916); +#93915 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93916 = VECTOR('',#93917,1.); +#93917 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#93918 = ORIENTED_EDGE('',*,*,#93919,.T.); +#93919 = EDGE_CURVE('',#93912,#80468,#93920,.T.); +#93920 = LINE('',#93921,#93922); +#93921 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93922 = VECTOR('',#93923,1.); +#93923 = DIRECTION('',(-0.,-0.,-1.)); +#93924 = PLANE('',#93925); +#93925 = AXIS2_PLACEMENT_3D('',#93926,#93927,#93928); +#93926 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93927 = DIRECTION('',(-1.,-2.602085213965E-16,0.)); +#93928 = DIRECTION('',(2.602085213965E-16,-1.,0.)); +#93929 = ADVANCED_FACE('',(#93930),#93948,.F.); +#93930 = FACE_BOUND('',#93931,.T.); +#93931 = EDGE_LOOP('',(#93932,#93933,#93941,#93947)); +#93932 = ORIENTED_EDGE('',*,*,#80493,.T.); +#93933 = ORIENTED_EDGE('',*,*,#93934,.F.); +#93934 = EDGE_CURVE('',#93935,#80486,#93937,.T.); +#93935 = VERTEX_POINT('',#93936); +#93936 = CARTESIAN_POINT('',(0.625,1.852187257439,1.96)); +#93937 = LINE('',#93938,#93939); +#93938 = CARTESIAN_POINT('',(0.625,1.852187257439,1.96)); +#93939 = VECTOR('',#93940,1.); +#93940 = DIRECTION('',(-0.,-0.,-1.)); +#93941 = ORIENTED_EDGE('',*,*,#93942,.F.); +#93942 = EDGE_CURVE('',#93904,#93935,#93943,.T.); +#93943 = LINE('',#93944,#93945); +#93944 = CARTESIAN_POINT('',(0.875,1.852187257439,1.96)); +#93945 = VECTOR('',#93946,1.); +#93946 = DIRECTION('',(-1.,0.,0.)); +#93947 = ORIENTED_EDGE('',*,*,#93903,.T.); +#93948 = PLANE('',#93949); +#93949 = AXIS2_PLACEMENT_3D('',#93950,#93951,#93952); +#93950 = CARTESIAN_POINT('',(0.875,1.852187257439,1.96)); +#93951 = DIRECTION('',(0.,-1.,0.)); +#93952 = DIRECTION('',(0.,-0.,-1.)); +#93953 = ADVANCED_FACE('',(#93954),#93972,.F.); +#93954 = FACE_BOUND('',#93955,.T.); +#93955 = EDGE_LOOP('',(#93956,#93957,#93965,#93971)); +#93956 = ORIENTED_EDGE('',*,*,#80485,.T.); +#93957 = ORIENTED_EDGE('',*,*,#93958,.F.); +#93958 = EDGE_CURVE('',#93959,#80478,#93961,.T.); +#93959 = VERTEX_POINT('',#93960); +#93960 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.96)); +#93961 = LINE('',#93962,#93963); +#93962 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.96)); +#93963 = VECTOR('',#93964,1.); +#93964 = DIRECTION('',(-0.,-0.,-1.)); +#93965 = ORIENTED_EDGE('',*,*,#93966,.F.); +#93966 = EDGE_CURVE('',#93935,#93959,#93967,.T.); +#93967 = LINE('',#93968,#93969); +#93968 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.96)); +#93969 = VECTOR('',#93970,1.); +#93970 = DIRECTION('',(2.602085213965E-16,-1.,-0.)); +#93971 = ORIENTED_EDGE('',*,*,#93934,.T.); +#93972 = PLANE('',#93973); +#93973 = AXIS2_PLACEMENT_3D('',#93974,#93975,#93976); +#93974 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.96)); +#93975 = DIRECTION('',(1.,2.602085213965E-16,-0.)); +#93976 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#93977 = ADVANCED_FACE('',(#93978),#93989,.F.); +#93978 = FACE_BOUND('',#93979,.T.); +#93979 = EDGE_LOOP('',(#93980,#93981,#93982,#93988)); +#93980 = ORIENTED_EDGE('',*,*,#80477,.T.); +#93981 = ORIENTED_EDGE('',*,*,#93919,.F.); +#93982 = ORIENTED_EDGE('',*,*,#93983,.F.); +#93983 = EDGE_CURVE('',#93959,#93912,#93984,.T.); +#93984 = LINE('',#93985,#93986); +#93985 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93986 = VECTOR('',#93987,1.); +#93987 = DIRECTION('',(1.,-0.,-0.)); +#93988 = ORIENTED_EDGE('',*,*,#93958,.T.); +#93989 = PLANE('',#93990); +#93990 = AXIS2_PLACEMENT_3D('',#93991,#93992,#93993); +#93991 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.96)); +#93992 = DIRECTION('',(0.,1.,-0.)); +#93993 = DIRECTION('',(0.,0.,1.)); +#93994 = ADVANCED_FACE('',(#93995),#94001,.T.); +#93995 = FACE_BOUND('',#93996,.T.); +#93996 = EDGE_LOOP('',(#93997,#93998,#93999,#94000)); +#93997 = ORIENTED_EDGE('',*,*,#93911,.T.); +#93998 = ORIENTED_EDGE('',*,*,#93942,.T.); +#93999 = ORIENTED_EDGE('',*,*,#93966,.T.); +#94000 = ORIENTED_EDGE('',*,*,#93983,.T.); +#94001 = PLANE('',#94002); +#94002 = AXIS2_PLACEMENT_3D('',#94003,#94004,#94005); +#94003 = CARTESIAN_POINT('',(0.,0.,1.96)); +#94004 = DIRECTION('',(0.,0.,1.)); +#94005 = DIRECTION('',(1.,0.,-0.)); +#94006 = ADVANCED_FACE('',(#94007),#94032,.F.); +#94007 = FACE_BOUND('',#94008,.T.); +#94008 = EDGE_LOOP('',(#94009,#94010,#94018,#94026)); +#94009 = ORIENTED_EDGE('',*,*,#80229,.T.); +#94010 = ORIENTED_EDGE('',*,*,#94011,.F.); +#94011 = EDGE_CURVE('',#94012,#80232,#94014,.T.); +#94012 = VERTEX_POINT('',#94013); +#94013 = CARTESIAN_POINT('',(0.375,1.852187257439,1.96)); +#94014 = LINE('',#94015,#94016); +#94015 = CARTESIAN_POINT('',(0.375,1.852187257439,1.96)); +#94016 = VECTOR('',#94017,1.); +#94017 = DIRECTION('',(-0.,-0.,-1.)); +#94018 = ORIENTED_EDGE('',*,*,#94019,.F.); +#94019 = EDGE_CURVE('',#94020,#94012,#94022,.T.); +#94020 = VERTEX_POINT('',#94021); +#94021 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94022 = LINE('',#94023,#94024); +#94023 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94024 = VECTOR('',#94025,1.); +#94025 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#94026 = ORIENTED_EDGE('',*,*,#94027,.T.); +#94027 = EDGE_CURVE('',#94020,#80230,#94028,.T.); +#94028 = LINE('',#94029,#94030); +#94029 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94030 = VECTOR('',#94031,1.); +#94031 = DIRECTION('',(-0.,-0.,-1.)); +#94032 = PLANE('',#94033); +#94033 = AXIS2_PLACEMENT_3D('',#94034,#94035,#94036); +#94034 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94035 = DIRECTION('',(-1.,-2.602085213965E-16,0.)); +#94036 = DIRECTION('',(2.602085213965E-16,-1.,0.)); +#94037 = ADVANCED_FACE('',(#94038),#94056,.F.); +#94038 = FACE_BOUND('',#94039,.T.); +#94039 = EDGE_LOOP('',(#94040,#94041,#94049,#94055)); +#94040 = ORIENTED_EDGE('',*,*,#80255,.T.); +#94041 = ORIENTED_EDGE('',*,*,#94042,.F.); +#94042 = EDGE_CURVE('',#94043,#80248,#94045,.T.); +#94043 = VERTEX_POINT('',#94044); +#94044 = CARTESIAN_POINT('',(0.125,1.852187257439,1.96)); +#94045 = LINE('',#94046,#94047); +#94046 = CARTESIAN_POINT('',(0.125,1.852187257439,1.96)); +#94047 = VECTOR('',#94048,1.); +#94048 = DIRECTION('',(-0.,-0.,-1.)); +#94049 = ORIENTED_EDGE('',*,*,#94050,.F.); +#94050 = EDGE_CURVE('',#94012,#94043,#94051,.T.); +#94051 = LINE('',#94052,#94053); +#94052 = CARTESIAN_POINT('',(0.375,1.852187257439,1.96)); +#94053 = VECTOR('',#94054,1.); +#94054 = DIRECTION('',(-1.,-8.673617379884E-16,0.)); +#94055 = ORIENTED_EDGE('',*,*,#94011,.T.); +#94056 = PLANE('',#94057); +#94057 = AXIS2_PLACEMENT_3D('',#94058,#94059,#94060); +#94058 = CARTESIAN_POINT('',(0.375,1.852187257439,1.96)); +#94059 = DIRECTION('',(8.673617379884E-16,-1.,0.)); +#94060 = DIRECTION('',(1.,8.673617379884E-16,0.)); +#94061 = ADVANCED_FACE('',(#94062),#94080,.F.); +#94062 = FACE_BOUND('',#94063,.T.); +#94063 = EDGE_LOOP('',(#94064,#94065,#94073,#94079)); +#94064 = ORIENTED_EDGE('',*,*,#80247,.T.); +#94065 = ORIENTED_EDGE('',*,*,#94066,.F.); +#94066 = EDGE_CURVE('',#94067,#80240,#94069,.T.); +#94067 = VERTEX_POINT('',#94068); +#94068 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.96)); +#94069 = LINE('',#94070,#94071); +#94070 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.96)); +#94071 = VECTOR('',#94072,1.); +#94072 = DIRECTION('',(-0.,-0.,-1.)); +#94073 = ORIENTED_EDGE('',*,*,#94074,.F.); +#94074 = EDGE_CURVE('',#94043,#94067,#94075,.T.); +#94075 = LINE('',#94076,#94077); +#94076 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.96)); +#94077 = VECTOR('',#94078,1.); +#94078 = DIRECTION('',(2.385244779468E-16,-1.,-0.)); +#94079 = ORIENTED_EDGE('',*,*,#94042,.T.); +#94080 = PLANE('',#94081); +#94081 = AXIS2_PLACEMENT_3D('',#94082,#94083,#94084); +#94082 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.96)); +#94083 = DIRECTION('',(1.,2.385244779468E-16,-0.)); +#94084 = DIRECTION('',(-2.385244779468E-16,1.,0.)); +#94085 = ADVANCED_FACE('',(#94086),#94097,.F.); +#94086 = FACE_BOUND('',#94087,.T.); +#94087 = EDGE_LOOP('',(#94088,#94089,#94090,#94096)); +#94088 = ORIENTED_EDGE('',*,*,#80239,.T.); +#94089 = ORIENTED_EDGE('',*,*,#94027,.F.); +#94090 = ORIENTED_EDGE('',*,*,#94091,.F.); +#94091 = EDGE_CURVE('',#94067,#94020,#94092,.T.); +#94092 = LINE('',#94093,#94094); +#94093 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94094 = VECTOR('',#94095,1.); +#94095 = DIRECTION('',(1.,-0.,-0.)); +#94096 = ORIENTED_EDGE('',*,*,#94066,.T.); +#94097 = PLANE('',#94098); +#94098 = AXIS2_PLACEMENT_3D('',#94099,#94100,#94101); +#94099 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.96)); +#94100 = DIRECTION('',(0.,1.,-0.)); +#94101 = DIRECTION('',(0.,0.,1.)); +#94102 = ADVANCED_FACE('',(#94103),#94109,.T.); +#94103 = FACE_BOUND('',#94104,.T.); +#94104 = EDGE_LOOP('',(#94105,#94106,#94107,#94108)); +#94105 = ORIENTED_EDGE('',*,*,#94019,.T.); +#94106 = ORIENTED_EDGE('',*,*,#94050,.T.); +#94107 = ORIENTED_EDGE('',*,*,#94074,.T.); +#94108 = ORIENTED_EDGE('',*,*,#94091,.T.); +#94109 = PLANE('',#94110); +#94110 = AXIS2_PLACEMENT_3D('',#94111,#94112,#94113); +#94111 = CARTESIAN_POINT('',(0.,0.,1.96)); +#94112 = DIRECTION('',(0.,0.,1.)); +#94113 = DIRECTION('',(1.,0.,-0.)); +#94114 = ADVANCED_FACE('',(#94115),#94140,.F.); +#94115 = FACE_BOUND('',#94116,.T.); +#94116 = EDGE_LOOP('',(#94117,#94118,#94126,#94134)); +#94117 = ORIENTED_EDGE('',*,*,#80501,.T.); +#94118 = ORIENTED_EDGE('',*,*,#94119,.F.); +#94119 = EDGE_CURVE('',#94120,#80504,#94122,.T.); +#94120 = VERTEX_POINT('',#94121); +#94121 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94122 = LINE('',#94123,#94124); +#94123 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94124 = VECTOR('',#94125,1.); +#94125 = DIRECTION('',(-0.,-0.,-1.)); +#94126 = ORIENTED_EDGE('',*,*,#94127,.F.); +#94127 = EDGE_CURVE('',#94128,#94120,#94130,.T.); +#94128 = VERTEX_POINT('',#94129); +#94129 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.96)); +#94130 = LINE('',#94131,#94132); +#94131 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94132 = VECTOR('',#94133,1.); +#94133 = DIRECTION('',(-5.20417042793E-16,1.,-0.)); +#94134 = ORIENTED_EDGE('',*,*,#94135,.T.); +#94135 = EDGE_CURVE('',#94128,#80502,#94136,.T.); +#94136 = LINE('',#94137,#94138); +#94137 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.96)); +#94138 = VECTOR('',#94139,1.); +#94139 = DIRECTION('',(-0.,-0.,-1.)); +#94140 = PLANE('',#94141); +#94141 = AXIS2_PLACEMENT_3D('',#94142,#94143,#94144); +#94142 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94143 = DIRECTION('',(-1.,-5.20417042793E-16,0.)); +#94144 = DIRECTION('',(5.20417042793E-16,-1.,0.)); +#94145 = ADVANCED_FACE('',(#94146),#94164,.F.); +#94146 = FACE_BOUND('',#94147,.T.); +#94147 = EDGE_LOOP('',(#94148,#94149,#94157,#94163)); +#94148 = ORIENTED_EDGE('',*,*,#80527,.T.); +#94149 = ORIENTED_EDGE('',*,*,#94150,.F.); +#94150 = EDGE_CURVE('',#94151,#80520,#94153,.T.); +#94151 = VERTEX_POINT('',#94152); +#94152 = CARTESIAN_POINT('',(2.2,1.852187257439,1.96)); +#94153 = LINE('',#94154,#94155); +#94154 = CARTESIAN_POINT('',(2.2,1.852187257439,1.96)); +#94155 = VECTOR('',#94156,1.); +#94156 = DIRECTION('',(-0.,-0.,-1.)); +#94157 = ORIENTED_EDGE('',*,*,#94158,.F.); +#94158 = EDGE_CURVE('',#94120,#94151,#94159,.T.); +#94159 = LINE('',#94160,#94161); +#94160 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94161 = VECTOR('',#94162,1.); +#94162 = DIRECTION('',(-1.,-3.614007241618E-16,0.)); +#94163 = ORIENTED_EDGE('',*,*,#94119,.T.); +#94164 = PLANE('',#94165); +#94165 = AXIS2_PLACEMENT_3D('',#94166,#94167,#94168); +#94166 = CARTESIAN_POINT('',(2.8,1.852187257439,1.96)); +#94167 = DIRECTION('',(3.614007241618E-16,-1.,0.)); +#94168 = DIRECTION('',(1.,3.614007241618E-16,0.)); +#94169 = ADVANCED_FACE('',(#94170),#94188,.F.); +#94170 = FACE_BOUND('',#94171,.T.); +#94171 = EDGE_LOOP('',(#94172,#94173,#94181,#94187)); +#94172 = ORIENTED_EDGE('',*,*,#80519,.T.); +#94173 = ORIENTED_EDGE('',*,*,#94174,.F.); +#94174 = EDGE_CURVE('',#94175,#80512,#94177,.T.); +#94175 = VERTEX_POINT('',#94176); +#94176 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.96)); +#94177 = LINE('',#94178,#94179); +#94178 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.96)); +#94179 = VECTOR('',#94180,1.); +#94180 = DIRECTION('',(-0.,-0.,-1.)); +#94181 = ORIENTED_EDGE('',*,*,#94182,.F.); +#94182 = EDGE_CURVE('',#94151,#94175,#94183,.T.); +#94183 = LINE('',#94184,#94185); +#94184 = CARTESIAN_POINT('',(2.2,1.852187257439,1.96)); +#94185 = VECTOR('',#94186,1.); +#94186 = DIRECTION('',(0.,-1.,0.)); +#94187 = ORIENTED_EDGE('',*,*,#94150,.T.); +#94188 = PLANE('',#94189); +#94189 = AXIS2_PLACEMENT_3D('',#94190,#94191,#94192); +#94190 = CARTESIAN_POINT('',(2.2,1.852187257439,1.96)); +#94191 = DIRECTION('',(1.,0.,-0.)); +#94192 = DIRECTION('',(-0.,0.,-1.)); +#94193 = ADVANCED_FACE('',(#94194),#94205,.F.); +#94194 = FACE_BOUND('',#94195,.T.); +#94195 = EDGE_LOOP('',(#94196,#94197,#94198,#94204)); +#94196 = ORIENTED_EDGE('',*,*,#80511,.T.); +#94197 = ORIENTED_EDGE('',*,*,#94135,.F.); +#94198 = ORIENTED_EDGE('',*,*,#94199,.F.); +#94199 = EDGE_CURVE('',#94175,#94128,#94200,.T.); +#94200 = LINE('',#94201,#94202); +#94201 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.96)); +#94202 = VECTOR('',#94203,1.); +#94203 = DIRECTION('',(1.,-1.807003620809E-16,-0.)); +#94204 = ORIENTED_EDGE('',*,*,#94174,.T.); +#94205 = PLANE('',#94206); +#94206 = AXIS2_PLACEMENT_3D('',#94207,#94208,#94209); +#94207 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.96)); +#94208 = DIRECTION('',(1.807003620809E-16,1.,-0.)); +#94209 = DIRECTION('',(-1.,1.807003620809E-16,0.)); +#94210 = ADVANCED_FACE('',(#94211),#94217,.F.); +#94211 = FACE_BOUND('',#94212,.T.); +#94212 = EDGE_LOOP('',(#94213,#94214,#94215,#94216)); +#94213 = ORIENTED_EDGE('',*,*,#94127,.T.); +#94214 = ORIENTED_EDGE('',*,*,#94158,.T.); +#94215 = ORIENTED_EDGE('',*,*,#94182,.T.); +#94216 = ORIENTED_EDGE('',*,*,#94199,.T.); +#94217 = PLANE('',#94218); +#94218 = AXIS2_PLACEMENT_3D('',#94219,#94220,#94221); +#94219 = CARTESIAN_POINT('',(0.,0.,1.96)); +#94220 = DIRECTION('',(-0.,0.,-1.)); +#94221 = DIRECTION('',(-1.,0.,0.)); +#94222 = ADVANCED_FACE('',(#94223),#94248,.T.); +#94223 = FACE_BOUND('',#94224,.T.); +#94224 = EDGE_LOOP('',(#94225,#94226,#94234,#94242)); +#94225 = ORIENTED_EDGE('',*,*,#90748,.F.); +#94226 = ORIENTED_EDGE('',*,*,#94227,.F.); +#94227 = EDGE_CURVE('',#94228,#90741,#94230,.T.); +#94228 = VERTEX_POINT('',#94229); +#94229 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.34)); +#94230 = LINE('',#94231,#94232); +#94231 = CARTESIAN_POINT('',(-2.2,-0.647812742561,1.34)); +#94232 = VECTOR('',#94233,1.); +#94233 = DIRECTION('',(0.,0.,1.)); +#94234 = ORIENTED_EDGE('',*,*,#94235,.T.); +#94235 = EDGE_CURVE('',#94228,#94236,#94238,.T.); +#94236 = VERTEX_POINT('',#94237); +#94237 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.34)); +#94238 = LINE('',#94239,#94240); +#94239 = CARTESIAN_POINT('',(-2.2,9.227216610312,1.34)); +#94240 = VECTOR('',#94241,1.); +#94241 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#94242 = ORIENTED_EDGE('',*,*,#94243,.T.); +#94243 = EDGE_CURVE('',#94236,#90749,#94244,.T.); +#94244 = LINE('',#94245,#94246); +#94245 = CARTESIAN_POINT('',(-2.2,1.852187257439,1.34)); +#94246 = VECTOR('',#94247,1.); +#94247 = DIRECTION('',(0.,0.,1.)); +#94248 = PLANE('',#94249); +#94249 = AXIS2_PLACEMENT_3D('',#94250,#94251,#94252); +#94250 = CARTESIAN_POINT('',(-2.2,9.227216610312,1.34)); +#94251 = DIRECTION('',(1.,3.469446951954E-16,-0.)); +#94252 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#94253 = ADVANCED_FACE('',(#94254),#94272,.T.); +#94254 = FACE_BOUND('',#94255,.T.); +#94255 = EDGE_LOOP('',(#94256,#94257,#94265,#94271)); +#94256 = ORIENTED_EDGE('',*,*,#90738,.F.); +#94257 = ORIENTED_EDGE('',*,*,#94258,.F.); +#94258 = EDGE_CURVE('',#94259,#90739,#94261,.T.); +#94259 = VERTEX_POINT('',#94260); +#94260 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.34)); +#94261 = LINE('',#94262,#94263); +#94262 = CARTESIAN_POINT('',(-2.8,-0.647812742561,1.34)); +#94263 = VECTOR('',#94264,1.); +#94264 = DIRECTION('',(0.,0.,1.)); +#94265 = ORIENTED_EDGE('',*,*,#94266,.T.); +#94266 = EDGE_CURVE('',#94259,#94228,#94267,.T.); +#94267 = LINE('',#94268,#94269); +#94268 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94269 = VECTOR('',#94270,1.); +#94270 = DIRECTION('',(1.,1.807003620809E-16,-0.)); +#94271 = ORIENTED_EDGE('',*,*,#94227,.T.); +#94272 = PLANE('',#94273); +#94273 = AXIS2_PLACEMENT_3D('',#94274,#94275,#94276); +#94274 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94275 = DIRECTION('',(1.807003620809E-16,-1.,0.)); +#94276 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#94277 = ADVANCED_FACE('',(#94278),#94296,.T.); +#94278 = FACE_BOUND('',#94279,.T.); +#94279 = EDGE_LOOP('',(#94280,#94281,#94289,#94295)); +#94280 = ORIENTED_EDGE('',*,*,#90764,.F.); +#94281 = ORIENTED_EDGE('',*,*,#94282,.F.); +#94282 = EDGE_CURVE('',#94283,#90757,#94285,.T.); +#94283 = VERTEX_POINT('',#94284); +#94284 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.34)); +#94285 = LINE('',#94286,#94287); +#94286 = CARTESIAN_POINT('',(-2.8,1.852187257439,1.34)); +#94287 = VECTOR('',#94288,1.); +#94288 = DIRECTION('',(0.,0.,1.)); +#94289 = ORIENTED_EDGE('',*,*,#94290,.T.); +#94290 = EDGE_CURVE('',#94283,#94259,#94291,.T.); +#94291 = LINE('',#94292,#94293); +#94292 = CARTESIAN_POINT('',(-2.8,9.227216610312,1.34)); +#94293 = VECTOR('',#94294,1.); +#94294 = DIRECTION('',(-1.734723475977E-16,-1.,0.)); +#94295 = ORIENTED_EDGE('',*,*,#94258,.T.); +#94296 = PLANE('',#94297); +#94297 = AXIS2_PLACEMENT_3D('',#94298,#94299,#94300); +#94298 = CARTESIAN_POINT('',(-2.8,9.227216610312,1.34)); +#94299 = DIRECTION('',(-1.,1.734723475977E-16,0.)); +#94300 = DIRECTION('',(-1.734723475977E-16,-1.,0.)); +#94301 = ADVANCED_FACE('',(#94302),#94313,.T.); +#94302 = FACE_BOUND('',#94303,.T.); +#94303 = EDGE_LOOP('',(#94304,#94305,#94306,#94312)); +#94304 = ORIENTED_EDGE('',*,*,#90756,.F.); +#94305 = ORIENTED_EDGE('',*,*,#94243,.F.); +#94306 = ORIENTED_EDGE('',*,*,#94307,.T.); +#94307 = EDGE_CURVE('',#94236,#94283,#94308,.T.); +#94308 = LINE('',#94309,#94310); +#94309 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94310 = VECTOR('',#94311,1.); +#94311 = DIRECTION('',(-1.,0.,0.)); +#94312 = ORIENTED_EDGE('',*,*,#94282,.T.); +#94313 = PLANE('',#94314); +#94314 = AXIS2_PLACEMENT_3D('',#94315,#94316,#94317); +#94315 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94316 = DIRECTION('',(0.,1.,-0.)); +#94317 = DIRECTION('',(0.,0.,1.)); +#94318 = ADVANCED_FACE('',(#94319),#94325,.F.); +#94319 = FACE_BOUND('',#94320,.T.); +#94320 = EDGE_LOOP('',(#94321,#94322,#94323,#94324)); +#94321 = ORIENTED_EDGE('',*,*,#94235,.F.); +#94322 = ORIENTED_EDGE('',*,*,#94266,.F.); +#94323 = ORIENTED_EDGE('',*,*,#94290,.F.); +#94324 = ORIENTED_EDGE('',*,*,#94307,.F.); +#94325 = PLANE('',#94326); +#94326 = AXIS2_PLACEMENT_3D('',#94327,#94328,#94329); +#94327 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94328 = DIRECTION('',(0.,0.,1.)); +#94329 = DIRECTION('',(1.,0.,-0.)); +#94330 = ADVANCED_FACE('',(#94331),#94356,.T.); +#94331 = FACE_BOUND('',#94332,.T.); +#94332 = EDGE_LOOP('',(#94333,#94334,#94342,#94350)); +#94333 = ORIENTED_EDGE('',*,*,#90714,.F.); +#94334 = ORIENTED_EDGE('',*,*,#94335,.F.); +#94335 = EDGE_CURVE('',#94336,#90707,#94338,.T.); +#94336 = VERTEX_POINT('',#94337); +#94337 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.34)); +#94338 = LINE('',#94339,#94340); +#94339 = CARTESIAN_POINT('',(-0.125,-0.647812742561,1.34)); +#94340 = VECTOR('',#94341,1.); +#94341 = DIRECTION('',(0.,0.,1.)); +#94342 = ORIENTED_EDGE('',*,*,#94343,.T.); +#94343 = EDGE_CURVE('',#94336,#94344,#94346,.T.); +#94344 = VERTEX_POINT('',#94345); +#94345 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.34)); +#94346 = LINE('',#94347,#94348); +#94347 = CARTESIAN_POINT('',(-0.125,9.227216610312,1.34)); +#94348 = VECTOR('',#94349,1.); +#94349 = DIRECTION('',(0.,1.,0.)); +#94350 = ORIENTED_EDGE('',*,*,#94351,.T.); +#94351 = EDGE_CURVE('',#94344,#90715,#94352,.T.); +#94352 = LINE('',#94353,#94354); +#94353 = CARTESIAN_POINT('',(-0.125,1.852187257439,1.34)); +#94354 = VECTOR('',#94355,1.); +#94355 = DIRECTION('',(0.,0.,1.)); +#94356 = PLANE('',#94357); +#94357 = AXIS2_PLACEMENT_3D('',#94358,#94359,#94360); +#94358 = CARTESIAN_POINT('',(-0.125,9.227216610312,1.34)); +#94359 = DIRECTION('',(1.,0.,0.)); +#94360 = DIRECTION('',(0.,0.,-1.)); +#94361 = ADVANCED_FACE('',(#94362),#94380,.T.); +#94362 = FACE_BOUND('',#94363,.T.); +#94363 = EDGE_LOOP('',(#94364,#94365,#94373,#94379)); +#94364 = ORIENTED_EDGE('',*,*,#90704,.F.); +#94365 = ORIENTED_EDGE('',*,*,#94366,.F.); +#94366 = EDGE_CURVE('',#94367,#90705,#94369,.T.); +#94367 = VERTEX_POINT('',#94368); +#94368 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.34)); +#94369 = LINE('',#94370,#94371); +#94370 = CARTESIAN_POINT('',(-0.375,-0.647812742561,1.34)); +#94371 = VECTOR('',#94372,1.); +#94372 = DIRECTION('',(0.,0.,1.)); +#94373 = ORIENTED_EDGE('',*,*,#94374,.T.); +#94374 = EDGE_CURVE('',#94367,#94336,#94375,.T.); +#94375 = LINE('',#94376,#94377); +#94376 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94377 = VECTOR('',#94378,1.); +#94378 = DIRECTION('',(1.,0.,-0.)); +#94379 = ORIENTED_EDGE('',*,*,#94335,.T.); +#94380 = PLANE('',#94381); +#94381 = AXIS2_PLACEMENT_3D('',#94382,#94383,#94384); +#94382 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94383 = DIRECTION('',(0.,-1.,0.)); +#94384 = DIRECTION('',(0.,-0.,-1.)); +#94385 = ADVANCED_FACE('',(#94386),#94404,.T.); +#94386 = FACE_BOUND('',#94387,.T.); +#94387 = EDGE_LOOP('',(#94388,#94389,#94397,#94403)); +#94388 = ORIENTED_EDGE('',*,*,#90730,.F.); +#94389 = ORIENTED_EDGE('',*,*,#94390,.F.); +#94390 = EDGE_CURVE('',#94391,#90723,#94393,.T.); +#94391 = VERTEX_POINT('',#94392); +#94392 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.34)); +#94393 = LINE('',#94394,#94395); +#94394 = CARTESIAN_POINT('',(-0.375,1.852187257439,1.34)); +#94395 = VECTOR('',#94396,1.); +#94396 = DIRECTION('',(0.,0.,1.)); +#94397 = ORIENTED_EDGE('',*,*,#94398,.T.); +#94398 = EDGE_CURVE('',#94391,#94367,#94399,.T.); +#94399 = LINE('',#94400,#94401); +#94400 = CARTESIAN_POINT('',(-0.375,9.227216610312,1.34)); +#94401 = VECTOR('',#94402,1.); +#94402 = DIRECTION('',(0.,-1.,0.)); +#94403 = ORIENTED_EDGE('',*,*,#94366,.T.); +#94404 = PLANE('',#94405); +#94405 = AXIS2_PLACEMENT_3D('',#94406,#94407,#94408); +#94406 = CARTESIAN_POINT('',(-0.375,9.227216610312,1.34)); +#94407 = DIRECTION('',(-1.,0.,0.)); +#94408 = DIRECTION('',(0.,0.,1.)); +#94409 = ADVANCED_FACE('',(#94410),#94421,.T.); +#94410 = FACE_BOUND('',#94411,.T.); +#94411 = EDGE_LOOP('',(#94412,#94413,#94414,#94420)); +#94412 = ORIENTED_EDGE('',*,*,#90722,.F.); +#94413 = ORIENTED_EDGE('',*,*,#94351,.F.); +#94414 = ORIENTED_EDGE('',*,*,#94415,.T.); +#94415 = EDGE_CURVE('',#94344,#94391,#94416,.T.); +#94416 = LINE('',#94417,#94418); +#94417 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94418 = VECTOR('',#94419,1.); +#94419 = DIRECTION('',(-1.,0.,0.)); +#94420 = ORIENTED_EDGE('',*,*,#94390,.T.); +#94421 = PLANE('',#94422); +#94422 = AXIS2_PLACEMENT_3D('',#94423,#94424,#94425); +#94423 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94424 = DIRECTION('',(0.,1.,-0.)); +#94425 = DIRECTION('',(0.,0.,1.)); +#94426 = ADVANCED_FACE('',(#94427),#94433,.F.); +#94427 = FACE_BOUND('',#94428,.T.); +#94428 = EDGE_LOOP('',(#94429,#94430,#94431,#94432)); +#94429 = ORIENTED_EDGE('',*,*,#94343,.F.); +#94430 = ORIENTED_EDGE('',*,*,#94374,.F.); +#94431 = ORIENTED_EDGE('',*,*,#94398,.F.); +#94432 = ORIENTED_EDGE('',*,*,#94415,.F.); +#94433 = PLANE('',#94434); +#94434 = AXIS2_PLACEMENT_3D('',#94435,#94436,#94437); +#94435 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94436 = DIRECTION('',(0.,-0.,1.)); +#94437 = DIRECTION('',(1.,0.,0.)); +#94438 = ADVANCED_FACE('',(#94439),#94464,.T.); +#94439 = FACE_BOUND('',#94440,.T.); +#94440 = EDGE_LOOP('',(#94441,#94442,#94450,#94458)); +#94441 = ORIENTED_EDGE('',*,*,#90680,.F.); +#94442 = ORIENTED_EDGE('',*,*,#94443,.F.); +#94443 = EDGE_CURVE('',#94444,#90673,#94446,.T.); +#94444 = VERTEX_POINT('',#94445); +#94445 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.34)); +#94446 = LINE('',#94447,#94448); +#94447 = CARTESIAN_POINT('',(1.375,-0.647812742561,1.34)); +#94448 = VECTOR('',#94449,1.); +#94449 = DIRECTION('',(0.,0.,1.)); +#94450 = ORIENTED_EDGE('',*,*,#94451,.T.); +#94451 = EDGE_CURVE('',#94444,#94452,#94454,.T.); +#94452 = VERTEX_POINT('',#94453); +#94453 = CARTESIAN_POINT('',(1.375,1.852187257439,1.34)); +#94454 = LINE('',#94455,#94456); +#94455 = CARTESIAN_POINT('',(1.375,9.227216610312,1.34)); +#94456 = VECTOR('',#94457,1.); +#94457 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#94458 = ORIENTED_EDGE('',*,*,#94459,.T.); +#94459 = EDGE_CURVE('',#94452,#90681,#94460,.T.); +#94460 = LINE('',#94461,#94462); +#94461 = CARTESIAN_POINT('',(1.375,1.852187257439,1.34)); +#94462 = VECTOR('',#94463,1.); +#94463 = DIRECTION('',(0.,0.,1.)); +#94464 = PLANE('',#94465); +#94465 = AXIS2_PLACEMENT_3D('',#94466,#94467,#94468); +#94466 = CARTESIAN_POINT('',(1.375,9.227216610312,1.34)); +#94467 = DIRECTION('',(1.,3.469446951954E-16,-0.)); +#94468 = DIRECTION('',(-3.469446951954E-16,1.,0.)); +#94469 = ADVANCED_FACE('',(#94470),#94488,.T.); +#94470 = FACE_BOUND('',#94471,.T.); +#94471 = EDGE_LOOP('',(#94472,#94473,#94481,#94487)); +#94472 = ORIENTED_EDGE('',*,*,#90670,.F.); +#94473 = ORIENTED_EDGE('',*,*,#94474,.F.); +#94474 = EDGE_CURVE('',#94475,#90671,#94477,.T.); +#94475 = VERTEX_POINT('',#94476); +#94476 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.34)); +#94477 = LINE('',#94478,#94479); +#94478 = CARTESIAN_POINT('',(1.125,-0.647812742561,1.34)); +#94479 = VECTOR('',#94480,1.); +#94480 = DIRECTION('',(0.,0.,1.)); +#94481 = ORIENTED_EDGE('',*,*,#94482,.T.); +#94482 = EDGE_CURVE('',#94475,#94444,#94483,.T.); +#94483 = LINE('',#94484,#94485); +#94484 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94485 = VECTOR('',#94486,1.); +#94486 = DIRECTION('',(1.,0.,-0.)); +#94487 = ORIENTED_EDGE('',*,*,#94443,.T.); +#94488 = PLANE('',#94489); +#94489 = AXIS2_PLACEMENT_3D('',#94490,#94491,#94492); +#94490 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94491 = DIRECTION('',(0.,-1.,0.)); +#94492 = DIRECTION('',(0.,-0.,-1.)); +#94493 = ADVANCED_FACE('',(#94494),#94512,.T.); +#94494 = FACE_BOUND('',#94495,.T.); +#94495 = EDGE_LOOP('',(#94496,#94497,#94505,#94511)); +#94496 = ORIENTED_EDGE('',*,*,#90696,.F.); +#94497 = ORIENTED_EDGE('',*,*,#94498,.F.); +#94498 = EDGE_CURVE('',#94499,#90689,#94501,.T.); +#94499 = VERTEX_POINT('',#94500); +#94500 = CARTESIAN_POINT('',(1.125,1.852187257439,1.34)); +#94501 = LINE('',#94502,#94503); +#94502 = CARTESIAN_POINT('',(1.125,1.852187257439,1.34)); +#94503 = VECTOR('',#94504,1.); +#94504 = DIRECTION('',(0.,0.,1.)); +#94505 = ORIENTED_EDGE('',*,*,#94506,.T.); +#94506 = EDGE_CURVE('',#94499,#94475,#94507,.T.); +#94507 = LINE('',#94508,#94509); +#94508 = CARTESIAN_POINT('',(1.125,9.227216610312,1.34)); +#94509 = VECTOR('',#94510,1.); +#94510 = DIRECTION('',(3.469446951954E-16,-1.,0.)); +#94511 = ORIENTED_EDGE('',*,*,#94474,.T.); +#94512 = PLANE('',#94513); +#94513 = AXIS2_PLACEMENT_3D('',#94514,#94515,#94516); +#94514 = CARTESIAN_POINT('',(1.125,9.227216610312,1.34)); +#94515 = DIRECTION('',(-1.,-3.469446951954E-16,0.)); +#94516 = DIRECTION('',(3.469446951954E-16,-1.,0.)); +#94517 = ADVANCED_FACE('',(#94518),#94529,.T.); +#94518 = FACE_BOUND('',#94519,.T.); +#94519 = EDGE_LOOP('',(#94520,#94521,#94522,#94528)); +#94520 = ORIENTED_EDGE('',*,*,#90688,.F.); +#94521 = ORIENTED_EDGE('',*,*,#94459,.F.); +#94522 = ORIENTED_EDGE('',*,*,#94523,.T.); +#94523 = EDGE_CURVE('',#94452,#94499,#94524,.T.); +#94524 = LINE('',#94525,#94526); +#94525 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94526 = VECTOR('',#94527,1.); +#94527 = DIRECTION('',(-1.,0.,0.)); +#94528 = ORIENTED_EDGE('',*,*,#94498,.T.); +#94529 = PLANE('',#94530); +#94530 = AXIS2_PLACEMENT_3D('',#94531,#94532,#94533); +#94531 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94532 = DIRECTION('',(0.,1.,-0.)); +#94533 = DIRECTION('',(0.,0.,1.)); +#94534 = ADVANCED_FACE('',(#94535),#94541,.F.); +#94535 = FACE_BOUND('',#94536,.T.); +#94536 = EDGE_LOOP('',(#94537,#94538,#94539,#94540)); +#94537 = ORIENTED_EDGE('',*,*,#94451,.F.); +#94538 = ORIENTED_EDGE('',*,*,#94482,.F.); +#94539 = ORIENTED_EDGE('',*,*,#94506,.F.); +#94540 = ORIENTED_EDGE('',*,*,#94523,.F.); +#94541 = PLANE('',#94542); +#94542 = AXIS2_PLACEMENT_3D('',#94543,#94544,#94545); +#94543 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94544 = DIRECTION('',(0.,0.,1.)); +#94545 = DIRECTION('',(1.,0.,-0.)); +#94546 = ADVANCED_FACE('',(#94547),#94572,.T.); +#94547 = FACE_BOUND('',#94548,.T.); +#94548 = EDGE_LOOP('',(#94549,#94550,#94558,#94566)); +#94549 = ORIENTED_EDGE('',*,*,#90646,.F.); +#94550 = ORIENTED_EDGE('',*,*,#94551,.F.); +#94551 = EDGE_CURVE('',#94552,#90639,#94554,.T.); +#94552 = VERTEX_POINT('',#94553); +#94553 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.34)); +#94554 = LINE('',#94555,#94556); +#94555 = CARTESIAN_POINT('',(-0.625,-0.647812742561,1.34)); +#94556 = VECTOR('',#94557,1.); +#94557 = DIRECTION('',(0.,0.,1.)); +#94558 = ORIENTED_EDGE('',*,*,#94559,.T.); +#94559 = EDGE_CURVE('',#94552,#94560,#94562,.T.); +#94560 = VERTEX_POINT('',#94561); +#94561 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.34)); +#94562 = LINE('',#94563,#94564); +#94563 = CARTESIAN_POINT('',(-0.625,9.227216610312,1.34)); +#94564 = VECTOR('',#94565,1.); +#94565 = DIRECTION('',(0.,1.,0.)); +#94566 = ORIENTED_EDGE('',*,*,#94567,.T.); +#94567 = EDGE_CURVE('',#94560,#90647,#94568,.T.); +#94568 = LINE('',#94569,#94570); +#94569 = CARTESIAN_POINT('',(-0.625,1.852187257439,1.34)); +#94570 = VECTOR('',#94571,1.); +#94571 = DIRECTION('',(0.,0.,1.)); +#94572 = PLANE('',#94573); +#94573 = AXIS2_PLACEMENT_3D('',#94574,#94575,#94576); +#94574 = CARTESIAN_POINT('',(-0.625,9.227216610312,1.34)); +#94575 = DIRECTION('',(1.,0.,0.)); +#94576 = DIRECTION('',(0.,0.,-1.)); +#94577 = ADVANCED_FACE('',(#94578),#94596,.T.); +#94578 = FACE_BOUND('',#94579,.T.); +#94579 = EDGE_LOOP('',(#94580,#94581,#94589,#94595)); +#94580 = ORIENTED_EDGE('',*,*,#90636,.F.); +#94581 = ORIENTED_EDGE('',*,*,#94582,.F.); +#94582 = EDGE_CURVE('',#94583,#90637,#94585,.T.); +#94583 = VERTEX_POINT('',#94584); +#94584 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.34)); +#94585 = LINE('',#94586,#94587); +#94586 = CARTESIAN_POINT('',(-0.875,-0.647812742561,1.34)); +#94587 = VECTOR('',#94588,1.); +#94588 = DIRECTION('',(0.,0.,1.)); +#94589 = ORIENTED_EDGE('',*,*,#94590,.T.); +#94590 = EDGE_CURVE('',#94583,#94552,#94591,.T.); +#94591 = LINE('',#94592,#94593); +#94592 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94593 = VECTOR('',#94594,1.); +#94594 = DIRECTION('',(1.,0.,-0.)); +#94595 = ORIENTED_EDGE('',*,*,#94551,.T.); +#94596 = PLANE('',#94597); +#94597 = AXIS2_PLACEMENT_3D('',#94598,#94599,#94600); +#94598 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94599 = DIRECTION('',(0.,-1.,0.)); +#94600 = DIRECTION('',(0.,-0.,-1.)); +#94601 = ADVANCED_FACE('',(#94602),#94620,.T.); +#94602 = FACE_BOUND('',#94603,.T.); +#94603 = EDGE_LOOP('',(#94604,#94605,#94613,#94619)); +#94604 = ORIENTED_EDGE('',*,*,#90662,.F.); +#94605 = ORIENTED_EDGE('',*,*,#94606,.F.); +#94606 = EDGE_CURVE('',#94607,#90655,#94609,.T.); +#94607 = VERTEX_POINT('',#94608); +#94608 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.34)); +#94609 = LINE('',#94610,#94611); +#94610 = CARTESIAN_POINT('',(-0.875,1.852187257439,1.34)); +#94611 = VECTOR('',#94612,1.); +#94612 = DIRECTION('',(0.,0.,1.)); +#94613 = ORIENTED_EDGE('',*,*,#94614,.T.); +#94614 = EDGE_CURVE('',#94607,#94583,#94615,.T.); +#94615 = LINE('',#94616,#94617); +#94616 = CARTESIAN_POINT('',(-0.875,9.227216610312,1.34)); +#94617 = VECTOR('',#94618,1.); +#94618 = DIRECTION('',(0.,-1.,0.)); +#94619 = ORIENTED_EDGE('',*,*,#94582,.T.); +#94620 = PLANE('',#94621); +#94621 = AXIS2_PLACEMENT_3D('',#94622,#94623,#94624); +#94622 = CARTESIAN_POINT('',(-0.875,9.227216610312,1.34)); +#94623 = DIRECTION('',(-1.,0.,0.)); +#94624 = DIRECTION('',(0.,0.,1.)); +#94625 = ADVANCED_FACE('',(#94626),#94637,.T.); +#94626 = FACE_BOUND('',#94627,.T.); +#94627 = EDGE_LOOP('',(#94628,#94629,#94630,#94636)); +#94628 = ORIENTED_EDGE('',*,*,#90654,.F.); +#94629 = ORIENTED_EDGE('',*,*,#94567,.F.); +#94630 = ORIENTED_EDGE('',*,*,#94631,.T.); +#94631 = EDGE_CURVE('',#94560,#94607,#94632,.T.); +#94632 = LINE('',#94633,#94634); +#94633 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94634 = VECTOR('',#94635,1.); +#94635 = DIRECTION('',(-1.,0.,0.)); +#94636 = ORIENTED_EDGE('',*,*,#94606,.T.); +#94637 = PLANE('',#94638); +#94638 = AXIS2_PLACEMENT_3D('',#94639,#94640,#94641); +#94639 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94640 = DIRECTION('',(0.,1.,-0.)); +#94641 = DIRECTION('',(0.,0.,1.)); +#94642 = ADVANCED_FACE('',(#94643),#94649,.F.); +#94643 = FACE_BOUND('',#94644,.T.); +#94644 = EDGE_LOOP('',(#94645,#94646,#94647,#94648)); +#94645 = ORIENTED_EDGE('',*,*,#94559,.F.); +#94646 = ORIENTED_EDGE('',*,*,#94590,.F.); +#94647 = ORIENTED_EDGE('',*,*,#94614,.F.); +#94648 = ORIENTED_EDGE('',*,*,#94631,.F.); +#94649 = PLANE('',#94650); +#94650 = AXIS2_PLACEMENT_3D('',#94651,#94652,#94653); +#94651 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94652 = DIRECTION('',(0.,-0.,1.)); +#94653 = DIRECTION('',(1.,0.,0.)); +#94654 = ADVANCED_FACE('',(#94655),#94680,.T.); +#94655 = FACE_BOUND('',#94656,.T.); +#94656 = EDGE_LOOP('',(#94657,#94658,#94666,#94674)); +#94657 = ORIENTED_EDGE('',*,*,#90612,.F.); +#94658 = ORIENTED_EDGE('',*,*,#94659,.F.); +#94659 = EDGE_CURVE('',#94660,#90605,#94662,.T.); +#94660 = VERTEX_POINT('',#94661); +#94661 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.34)); +#94662 = LINE('',#94663,#94664); +#94663 = CARTESIAN_POINT('',(-1.125,-0.647812742561,1.34)); +#94664 = VECTOR('',#94665,1.); +#94665 = DIRECTION('',(0.,0.,1.)); +#94666 = ORIENTED_EDGE('',*,*,#94667,.T.); +#94667 = EDGE_CURVE('',#94660,#94668,#94670,.T.); +#94668 = VERTEX_POINT('',#94669); +#94669 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.34)); +#94670 = LINE('',#94671,#94672); +#94671 = CARTESIAN_POINT('',(-1.125,9.227216610312,1.34)); +#94672 = VECTOR('',#94673,1.); +#94673 = DIRECTION('',(0.,1.,0.)); +#94674 = ORIENTED_EDGE('',*,*,#94675,.T.); +#94675 = EDGE_CURVE('',#94668,#90613,#94676,.T.); +#94676 = LINE('',#94677,#94678); +#94677 = CARTESIAN_POINT('',(-1.125,1.852187257439,1.34)); +#94678 = VECTOR('',#94679,1.); +#94679 = DIRECTION('',(0.,0.,1.)); +#94680 = PLANE('',#94681); +#94681 = AXIS2_PLACEMENT_3D('',#94682,#94683,#94684); +#94682 = CARTESIAN_POINT('',(-1.125,9.227216610312,1.34)); +#94683 = DIRECTION('',(1.,0.,0.)); +#94684 = DIRECTION('',(0.,0.,-1.)); +#94685 = ADVANCED_FACE('',(#94686),#94704,.T.); +#94686 = FACE_BOUND('',#94687,.T.); +#94687 = EDGE_LOOP('',(#94688,#94689,#94697,#94703)); +#94688 = ORIENTED_EDGE('',*,*,#90602,.F.); +#94689 = ORIENTED_EDGE('',*,*,#94690,.F.); +#94690 = EDGE_CURVE('',#94691,#90603,#94693,.T.); +#94691 = VERTEX_POINT('',#94692); +#94692 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.34)); +#94693 = LINE('',#94694,#94695); +#94694 = CARTESIAN_POINT('',(-1.375,-0.647812742561,1.34)); +#94695 = VECTOR('',#94696,1.); +#94696 = DIRECTION('',(0.,0.,1.)); +#94697 = ORIENTED_EDGE('',*,*,#94698,.T.); +#94698 = EDGE_CURVE('',#94691,#94660,#94699,.T.); +#94699 = LINE('',#94700,#94701); +#94700 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94701 = VECTOR('',#94702,1.); +#94702 = DIRECTION('',(1.,0.,-0.)); +#94703 = ORIENTED_EDGE('',*,*,#94659,.T.); +#94704 = PLANE('',#94705); +#94705 = AXIS2_PLACEMENT_3D('',#94706,#94707,#94708); +#94706 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94707 = DIRECTION('',(0.,-1.,0.)); +#94708 = DIRECTION('',(0.,-0.,-1.)); +#94709 = ADVANCED_FACE('',(#94710),#94728,.T.); +#94710 = FACE_BOUND('',#94711,.T.); +#94711 = EDGE_LOOP('',(#94712,#94713,#94721,#94727)); +#94712 = ORIENTED_EDGE('',*,*,#90628,.F.); +#94713 = ORIENTED_EDGE('',*,*,#94714,.F.); +#94714 = EDGE_CURVE('',#94715,#90621,#94717,.T.); +#94715 = VERTEX_POINT('',#94716); +#94716 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.34)); +#94717 = LINE('',#94718,#94719); +#94718 = CARTESIAN_POINT('',(-1.375,1.852187257439,1.34)); +#94719 = VECTOR('',#94720,1.); +#94720 = DIRECTION('',(0.,0.,1.)); +#94721 = ORIENTED_EDGE('',*,*,#94722,.T.); +#94722 = EDGE_CURVE('',#94715,#94691,#94723,.T.); +#94723 = LINE('',#94724,#94725); +#94724 = CARTESIAN_POINT('',(-1.375,9.227216610312,1.34)); +#94725 = VECTOR('',#94726,1.); +#94726 = DIRECTION('',(0.,-1.,0.)); +#94727 = ORIENTED_EDGE('',*,*,#94690,.T.); +#94728 = PLANE('',#94729); +#94729 = AXIS2_PLACEMENT_3D('',#94730,#94731,#94732); +#94730 = CARTESIAN_POINT('',(-1.375,9.227216610312,1.34)); +#94731 = DIRECTION('',(-1.,0.,0.)); +#94732 = DIRECTION('',(0.,0.,1.)); +#94733 = ADVANCED_FACE('',(#94734),#94745,.T.); +#94734 = FACE_BOUND('',#94735,.T.); +#94735 = EDGE_LOOP('',(#94736,#94737,#94738,#94744)); +#94736 = ORIENTED_EDGE('',*,*,#90620,.F.); +#94737 = ORIENTED_EDGE('',*,*,#94675,.F.); +#94738 = ORIENTED_EDGE('',*,*,#94739,.T.); +#94739 = EDGE_CURVE('',#94668,#94715,#94740,.T.); +#94740 = LINE('',#94741,#94742); +#94741 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94742 = VECTOR('',#94743,1.); +#94743 = DIRECTION('',(-1.,0.,0.)); +#94744 = ORIENTED_EDGE('',*,*,#94714,.T.); +#94745 = PLANE('',#94746); +#94746 = AXIS2_PLACEMENT_3D('',#94747,#94748,#94749); +#94747 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94748 = DIRECTION('',(0.,1.,-0.)); +#94749 = DIRECTION('',(0.,0.,1.)); +#94750 = ADVANCED_FACE('',(#94751),#94757,.F.); +#94751 = FACE_BOUND('',#94752,.T.); +#94752 = EDGE_LOOP('',(#94753,#94754,#94755,#94756)); +#94753 = ORIENTED_EDGE('',*,*,#94667,.F.); +#94754 = ORIENTED_EDGE('',*,*,#94698,.F.); +#94755 = ORIENTED_EDGE('',*,*,#94722,.F.); +#94756 = ORIENTED_EDGE('',*,*,#94739,.F.); +#94757 = PLANE('',#94758); +#94758 = AXIS2_PLACEMENT_3D('',#94759,#94760,#94761); +#94759 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94760 = DIRECTION('',(0.,-0.,1.)); +#94761 = DIRECTION('',(1.,0.,0.)); +#94762 = ADVANCED_FACE('',(#94763),#94788,.T.); +#94763 = FACE_BOUND('',#94764,.T.); +#94764 = EDGE_LOOP('',(#94765,#94766,#94774,#94782)); +#94765 = ORIENTED_EDGE('',*,*,#90578,.F.); +#94766 = ORIENTED_EDGE('',*,*,#94767,.F.); +#94767 = EDGE_CURVE('',#94768,#90571,#94770,.T.); +#94768 = VERTEX_POINT('',#94769); +#94769 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.34)); +#94770 = LINE('',#94771,#94772); +#94771 = CARTESIAN_POINT('',(0.875,-0.647812742561,1.34)); +#94772 = VECTOR('',#94773,1.); +#94773 = DIRECTION('',(0.,0.,1.)); +#94774 = ORIENTED_EDGE('',*,*,#94775,.T.); +#94775 = EDGE_CURVE('',#94768,#94776,#94778,.T.); +#94776 = VERTEX_POINT('',#94777); +#94777 = CARTESIAN_POINT('',(0.875,1.852187257439,1.34)); +#94778 = LINE('',#94779,#94780); +#94779 = CARTESIAN_POINT('',(0.875,9.227216610312,1.34)); +#94780 = VECTOR('',#94781,1.); +#94781 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#94782 = ORIENTED_EDGE('',*,*,#94783,.T.); +#94783 = EDGE_CURVE('',#94776,#90579,#94784,.T.); +#94784 = LINE('',#94785,#94786); +#94785 = CARTESIAN_POINT('',(0.875,1.852187257439,1.34)); +#94786 = VECTOR('',#94787,1.); +#94787 = DIRECTION('',(0.,0.,1.)); +#94788 = PLANE('',#94789); +#94789 = AXIS2_PLACEMENT_3D('',#94790,#94791,#94792); +#94790 = CARTESIAN_POINT('',(0.875,9.227216610312,1.34)); +#94791 = DIRECTION('',(1.,2.602085213965E-16,-0.)); +#94792 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#94793 = ADVANCED_FACE('',(#94794),#94812,.T.); +#94794 = FACE_BOUND('',#94795,.T.); +#94795 = EDGE_LOOP('',(#94796,#94797,#94805,#94811)); +#94796 = ORIENTED_EDGE('',*,*,#90568,.F.); +#94797 = ORIENTED_EDGE('',*,*,#94798,.F.); +#94798 = EDGE_CURVE('',#94799,#90569,#94801,.T.); +#94799 = VERTEX_POINT('',#94800); +#94800 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.34)); +#94801 = LINE('',#94802,#94803); +#94802 = CARTESIAN_POINT('',(0.625,-0.647812742561,1.34)); +#94803 = VECTOR('',#94804,1.); +#94804 = DIRECTION('',(0.,0.,1.)); +#94805 = ORIENTED_EDGE('',*,*,#94806,.T.); +#94806 = EDGE_CURVE('',#94799,#94768,#94807,.T.); +#94807 = LINE('',#94808,#94809); +#94808 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94809 = VECTOR('',#94810,1.); +#94810 = DIRECTION('',(1.,0.,-0.)); +#94811 = ORIENTED_EDGE('',*,*,#94767,.T.); +#94812 = PLANE('',#94813); +#94813 = AXIS2_PLACEMENT_3D('',#94814,#94815,#94816); +#94814 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94815 = DIRECTION('',(0.,-1.,0.)); +#94816 = DIRECTION('',(0.,-0.,-1.)); +#94817 = ADVANCED_FACE('',(#94818),#94836,.T.); +#94818 = FACE_BOUND('',#94819,.T.); +#94819 = EDGE_LOOP('',(#94820,#94821,#94829,#94835)); +#94820 = ORIENTED_EDGE('',*,*,#90594,.F.); +#94821 = ORIENTED_EDGE('',*,*,#94822,.F.); +#94822 = EDGE_CURVE('',#94823,#90587,#94825,.T.); +#94823 = VERTEX_POINT('',#94824); +#94824 = CARTESIAN_POINT('',(0.625,1.852187257439,1.34)); +#94825 = LINE('',#94826,#94827); +#94826 = CARTESIAN_POINT('',(0.625,1.852187257439,1.34)); +#94827 = VECTOR('',#94828,1.); +#94828 = DIRECTION('',(0.,0.,1.)); +#94829 = ORIENTED_EDGE('',*,*,#94830,.T.); +#94830 = EDGE_CURVE('',#94823,#94799,#94831,.T.); +#94831 = LINE('',#94832,#94833); +#94832 = CARTESIAN_POINT('',(0.625,9.227216610312,1.34)); +#94833 = VECTOR('',#94834,1.); +#94834 = DIRECTION('',(2.602085213965E-16,-1.,0.)); +#94835 = ORIENTED_EDGE('',*,*,#94798,.T.); +#94836 = PLANE('',#94837); +#94837 = AXIS2_PLACEMENT_3D('',#94838,#94839,#94840); +#94838 = CARTESIAN_POINT('',(0.625,9.227216610312,1.34)); +#94839 = DIRECTION('',(-1.,-2.602085213965E-16,0.)); +#94840 = DIRECTION('',(2.602085213965E-16,-1.,0.)); +#94841 = ADVANCED_FACE('',(#94842),#94853,.T.); +#94842 = FACE_BOUND('',#94843,.T.); +#94843 = EDGE_LOOP('',(#94844,#94845,#94846,#94852)); +#94844 = ORIENTED_EDGE('',*,*,#90586,.F.); +#94845 = ORIENTED_EDGE('',*,*,#94783,.F.); +#94846 = ORIENTED_EDGE('',*,*,#94847,.T.); +#94847 = EDGE_CURVE('',#94776,#94823,#94848,.T.); +#94848 = LINE('',#94849,#94850); +#94849 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94850 = VECTOR('',#94851,1.); +#94851 = DIRECTION('',(-1.,0.,0.)); +#94852 = ORIENTED_EDGE('',*,*,#94822,.T.); +#94853 = PLANE('',#94854); +#94854 = AXIS2_PLACEMENT_3D('',#94855,#94856,#94857); +#94855 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94856 = DIRECTION('',(0.,1.,-0.)); +#94857 = DIRECTION('',(0.,0.,1.)); +#94858 = ADVANCED_FACE('',(#94859),#94865,.F.); +#94859 = FACE_BOUND('',#94860,.T.); +#94860 = EDGE_LOOP('',(#94861,#94862,#94863,#94864)); +#94861 = ORIENTED_EDGE('',*,*,#94775,.F.); +#94862 = ORIENTED_EDGE('',*,*,#94806,.F.); +#94863 = ORIENTED_EDGE('',*,*,#94830,.F.); +#94864 = ORIENTED_EDGE('',*,*,#94847,.F.); +#94865 = PLANE('',#94866); +#94866 = AXIS2_PLACEMENT_3D('',#94867,#94868,#94869); +#94867 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94868 = DIRECTION('',(0.,0.,1.)); +#94869 = DIRECTION('',(1.,0.,-0.)); +#94870 = ADVANCED_FACE('',(#94871),#94896,.T.); +#94871 = FACE_BOUND('',#94872,.T.); +#94872 = EDGE_LOOP('',(#94873,#94874,#94882,#94890)); +#94873 = ORIENTED_EDGE('',*,*,#90544,.F.); +#94874 = ORIENTED_EDGE('',*,*,#94875,.F.); +#94875 = EDGE_CURVE('',#94876,#90537,#94878,.T.); +#94876 = VERTEX_POINT('',#94877); +#94877 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.34)); +#94878 = LINE('',#94879,#94880); +#94879 = CARTESIAN_POINT('',(0.375,-0.647812742561,1.34)); +#94880 = VECTOR('',#94881,1.); +#94881 = DIRECTION('',(0.,0.,1.)); +#94882 = ORIENTED_EDGE('',*,*,#94883,.T.); +#94883 = EDGE_CURVE('',#94876,#94884,#94886,.T.); +#94884 = VERTEX_POINT('',#94885); +#94885 = CARTESIAN_POINT('',(0.375,1.852187257439,1.34)); +#94886 = LINE('',#94887,#94888); +#94887 = CARTESIAN_POINT('',(0.375,9.227216610312,1.34)); +#94888 = VECTOR('',#94889,1.); +#94889 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#94890 = ORIENTED_EDGE('',*,*,#94891,.T.); +#94891 = EDGE_CURVE('',#94884,#90545,#94892,.T.); +#94892 = LINE('',#94893,#94894); +#94893 = CARTESIAN_POINT('',(0.375,1.852187257439,1.34)); +#94894 = VECTOR('',#94895,1.); +#94895 = DIRECTION('',(0.,0.,1.)); +#94896 = PLANE('',#94897); +#94897 = AXIS2_PLACEMENT_3D('',#94898,#94899,#94900); +#94898 = CARTESIAN_POINT('',(0.375,9.227216610312,1.34)); +#94899 = DIRECTION('',(1.,2.602085213965E-16,-0.)); +#94900 = DIRECTION('',(-2.602085213965E-16,1.,0.)); +#94901 = ADVANCED_FACE('',(#94902),#94920,.T.); +#94902 = FACE_BOUND('',#94903,.T.); +#94903 = EDGE_LOOP('',(#94904,#94905,#94913,#94919)); +#94904 = ORIENTED_EDGE('',*,*,#90534,.F.); +#94905 = ORIENTED_EDGE('',*,*,#94906,.F.); +#94906 = EDGE_CURVE('',#94907,#90535,#94909,.T.); +#94907 = VERTEX_POINT('',#94908); +#94908 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.34)); +#94909 = LINE('',#94910,#94911); +#94910 = CARTESIAN_POINT('',(0.125,-0.647812742561,1.34)); +#94911 = VECTOR('',#94912,1.); +#94912 = DIRECTION('',(0.,0.,1.)); +#94913 = ORIENTED_EDGE('',*,*,#94914,.T.); +#94914 = EDGE_CURVE('',#94907,#94876,#94915,.T.); +#94915 = LINE('',#94916,#94917); +#94916 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94917 = VECTOR('',#94918,1.); +#94918 = DIRECTION('',(1.,0.,-0.)); +#94919 = ORIENTED_EDGE('',*,*,#94875,.T.); +#94920 = PLANE('',#94921); +#94921 = AXIS2_PLACEMENT_3D('',#94922,#94923,#94924); +#94922 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#94923 = DIRECTION('',(0.,-1.,0.)); +#94924 = DIRECTION('',(0.,-0.,-1.)); +#94925 = ADVANCED_FACE('',(#94926),#94944,.T.); +#94926 = FACE_BOUND('',#94927,.T.); +#94927 = EDGE_LOOP('',(#94928,#94929,#94937,#94943)); +#94928 = ORIENTED_EDGE('',*,*,#90560,.F.); +#94929 = ORIENTED_EDGE('',*,*,#94930,.F.); +#94930 = EDGE_CURVE('',#94931,#90553,#94933,.T.); +#94931 = VERTEX_POINT('',#94932); +#94932 = CARTESIAN_POINT('',(0.125,1.852187257439,1.34)); +#94933 = LINE('',#94934,#94935); +#94934 = CARTESIAN_POINT('',(0.125,1.852187257439,1.34)); +#94935 = VECTOR('',#94936,1.); +#94936 = DIRECTION('',(0.,0.,1.)); +#94937 = ORIENTED_EDGE('',*,*,#94938,.T.); +#94938 = EDGE_CURVE('',#94931,#94907,#94939,.T.); +#94939 = LINE('',#94940,#94941); +#94940 = CARTESIAN_POINT('',(0.125,9.227216610312,1.34)); +#94941 = VECTOR('',#94942,1.); +#94942 = DIRECTION('',(2.385244779468E-16,-1.,0.)); +#94943 = ORIENTED_EDGE('',*,*,#94906,.T.); +#94944 = PLANE('',#94945); +#94945 = AXIS2_PLACEMENT_3D('',#94946,#94947,#94948); +#94946 = CARTESIAN_POINT('',(0.125,9.227216610312,1.34)); +#94947 = DIRECTION('',(-1.,-2.385244779468E-16,0.)); +#94948 = DIRECTION('',(2.385244779468E-16,-1.,0.)); +#94949 = ADVANCED_FACE('',(#94950),#94961,.T.); +#94950 = FACE_BOUND('',#94951,.T.); +#94951 = EDGE_LOOP('',(#94952,#94953,#94954,#94960)); +#94952 = ORIENTED_EDGE('',*,*,#90552,.F.); +#94953 = ORIENTED_EDGE('',*,*,#94891,.F.); +#94954 = ORIENTED_EDGE('',*,*,#94955,.T.); +#94955 = EDGE_CURVE('',#94884,#94931,#94956,.T.); +#94956 = LINE('',#94957,#94958); +#94957 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94958 = VECTOR('',#94959,1.); +#94959 = DIRECTION('',(-1.,-8.673617379884E-16,0.)); +#94960 = ORIENTED_EDGE('',*,*,#94930,.T.); +#94961 = PLANE('',#94962); +#94962 = AXIS2_PLACEMENT_3D('',#94963,#94964,#94965); +#94963 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#94964 = DIRECTION('',(-8.673617379884E-16,1.,0.)); +#94965 = DIRECTION('',(-1.,-8.673617379884E-16,0.)); +#94966 = ADVANCED_FACE('',(#94967),#94973,.F.); +#94967 = FACE_BOUND('',#94968,.T.); +#94968 = EDGE_LOOP('',(#94969,#94970,#94971,#94972)); +#94969 = ORIENTED_EDGE('',*,*,#94883,.F.); +#94970 = ORIENTED_EDGE('',*,*,#94914,.F.); +#94971 = ORIENTED_EDGE('',*,*,#94938,.F.); +#94972 = ORIENTED_EDGE('',*,*,#94955,.F.); +#94973 = PLANE('',#94974); +#94974 = AXIS2_PLACEMENT_3D('',#94975,#94976,#94977); +#94975 = CARTESIAN_POINT('',(0.,0.,1.34)); +#94976 = DIRECTION('',(0.,0.,1.)); +#94977 = DIRECTION('',(1.,0.,-0.)); +#94978 = ADVANCED_FACE('',(#94979),#95004,.T.); +#94979 = FACE_BOUND('',#94980,.T.); +#94980 = EDGE_LOOP('',(#94981,#94982,#94990,#94998)); +#94981 = ORIENTED_EDGE('',*,*,#90510,.F.); +#94982 = ORIENTED_EDGE('',*,*,#94983,.F.); +#94983 = EDGE_CURVE('',#94984,#90503,#94986,.T.); +#94984 = VERTEX_POINT('',#94985); +#94985 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.34)); +#94986 = LINE('',#94987,#94988); +#94987 = CARTESIAN_POINT('',(2.8,-0.647812742561,1.34)); +#94988 = VECTOR('',#94989,1.); +#94989 = DIRECTION('',(0.,0.,1.)); +#94990 = ORIENTED_EDGE('',*,*,#94991,.T.); +#94991 = EDGE_CURVE('',#94984,#94992,#94994,.T.); +#94992 = VERTEX_POINT('',#94993); +#94993 = CARTESIAN_POINT('',(2.8,1.852187257439,1.34)); +#94994 = LINE('',#94995,#94996); +#94995 = CARTESIAN_POINT('',(2.8,9.227216610312,1.34)); +#94996 = VECTOR('',#94997,1.); +#94997 = DIRECTION('',(-5.20417042793E-16,1.,0.)); +#94998 = ORIENTED_EDGE('',*,*,#94999,.T.); +#94999 = EDGE_CURVE('',#94992,#90511,#95000,.T.); +#95000 = LINE('',#95001,#95002); +#95001 = CARTESIAN_POINT('',(2.8,1.852187257439,1.34)); +#95002 = VECTOR('',#95003,1.); +#95003 = DIRECTION('',(0.,0.,1.)); +#95004 = PLANE('',#95005); +#95005 = AXIS2_PLACEMENT_3D('',#95006,#95007,#95008); +#95006 = CARTESIAN_POINT('',(2.8,9.227216610312,1.34)); +#95007 = DIRECTION('',(1.,5.20417042793E-16,-0.)); +#95008 = DIRECTION('',(-5.20417042793E-16,1.,0.)); +#95009 = ADVANCED_FACE('',(#95010),#95028,.T.); +#95010 = FACE_BOUND('',#95011,.T.); +#95011 = EDGE_LOOP('',(#95012,#95013,#95021,#95027)); +#95012 = ORIENTED_EDGE('',*,*,#90500,.F.); +#95013 = ORIENTED_EDGE('',*,*,#95014,.F.); +#95014 = EDGE_CURVE('',#95015,#90501,#95017,.T.); +#95015 = VERTEX_POINT('',#95016); +#95016 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.34)); +#95017 = LINE('',#95018,#95019); +#95018 = CARTESIAN_POINT('',(2.2,-0.647812742561,1.34)); +#95019 = VECTOR('',#95020,1.); +#95020 = DIRECTION('',(0.,0.,1.)); +#95021 = ORIENTED_EDGE('',*,*,#95022,.T.); +#95022 = EDGE_CURVE('',#95015,#94984,#95023,.T.); +#95023 = LINE('',#95024,#95025); +#95024 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#95025 = VECTOR('',#95026,1.); +#95026 = DIRECTION('',(1.,-1.807003620809E-16,0.)); +#95027 = ORIENTED_EDGE('',*,*,#94983,.T.); +#95028 = PLANE('',#95029); +#95029 = AXIS2_PLACEMENT_3D('',#95030,#95031,#95032); +#95030 = CARTESIAN_POINT('',(-3.,-0.647812742561,1.34)); +#95031 = DIRECTION('',(-1.807003620809E-16,-1.,0.)); +#95032 = DIRECTION('',(1.,-1.807003620809E-16,0.)); +#95033 = ADVANCED_FACE('',(#95034),#95052,.T.); +#95034 = FACE_BOUND('',#95035,.T.); +#95035 = EDGE_LOOP('',(#95036,#95037,#95045,#95051)); +#95036 = ORIENTED_EDGE('',*,*,#90526,.F.); +#95037 = ORIENTED_EDGE('',*,*,#95038,.F.); +#95038 = EDGE_CURVE('',#95039,#90519,#95041,.T.); +#95039 = VERTEX_POINT('',#95040); +#95040 = CARTESIAN_POINT('',(2.2,1.852187257439,1.34)); +#95041 = LINE('',#95042,#95043); +#95042 = CARTESIAN_POINT('',(2.2,1.852187257439,1.34)); +#95043 = VECTOR('',#95044,1.); +#95044 = DIRECTION('',(0.,0.,1.)); +#95045 = ORIENTED_EDGE('',*,*,#95046,.T.); +#95046 = EDGE_CURVE('',#95039,#95015,#95047,.T.); +#95047 = LINE('',#95048,#95049); +#95048 = CARTESIAN_POINT('',(2.2,9.227216610312,1.34)); +#95049 = VECTOR('',#95050,1.); +#95050 = DIRECTION('',(0.,-1.,0.)); +#95051 = ORIENTED_EDGE('',*,*,#95014,.T.); +#95052 = PLANE('',#95053); +#95053 = AXIS2_PLACEMENT_3D('',#95054,#95055,#95056); +#95054 = CARTESIAN_POINT('',(2.2,9.227216610312,1.34)); +#95055 = DIRECTION('',(-1.,0.,0.)); +#95056 = DIRECTION('',(0.,0.,1.)); +#95057 = ADVANCED_FACE('',(#95058),#95069,.T.); +#95058 = FACE_BOUND('',#95059,.T.); +#95059 = EDGE_LOOP('',(#95060,#95061,#95062,#95068)); +#95060 = ORIENTED_EDGE('',*,*,#90518,.F.); +#95061 = ORIENTED_EDGE('',*,*,#94999,.F.); +#95062 = ORIENTED_EDGE('',*,*,#95063,.T.); +#95063 = EDGE_CURVE('',#94992,#95039,#95064,.T.); +#95064 = LINE('',#95065,#95066); +#95065 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#95066 = VECTOR('',#95067,1.); +#95067 = DIRECTION('',(-1.,-3.614007241618E-16,0.)); +#95068 = ORIENTED_EDGE('',*,*,#95038,.T.); +#95069 = PLANE('',#95070); +#95070 = AXIS2_PLACEMENT_3D('',#95071,#95072,#95073); +#95071 = CARTESIAN_POINT('',(-3.,1.852187257439,1.34)); +#95072 = DIRECTION('',(-3.614007241618E-16,1.,0.)); +#95073 = DIRECTION('',(-1.,-3.614007241618E-16,0.)); +#95074 = ADVANCED_FACE('',(#95075),#95081,.F.); +#95075 = FACE_BOUND('',#95076,.T.); +#95076 = EDGE_LOOP('',(#95077,#95078,#95079,#95080)); +#95077 = ORIENTED_EDGE('',*,*,#94991,.F.); +#95078 = ORIENTED_EDGE('',*,*,#95022,.F.); +#95079 = ORIENTED_EDGE('',*,*,#95046,.F.); +#95080 = ORIENTED_EDGE('',*,*,#95063,.F.); +#95081 = PLANE('',#95082); +#95082 = AXIS2_PLACEMENT_3D('',#95083,#95084,#95085); +#95083 = CARTESIAN_POINT('',(0.,0.,1.34)); +#95084 = DIRECTION('',(0.,0.,1.)); +#95085 = DIRECTION('',(1.,0.,-0.)); +#95086 = ADVANCED_FACE('',(#95087),#95112,.T.); +#95087 = FACE_BOUND('',#95088,.T.); +#95088 = EDGE_LOOP('',(#95089,#95090,#95098,#95106)); +#95089 = ORIENTED_EDGE('',*,*,#79633,.F.); +#95090 = ORIENTED_EDGE('',*,*,#95091,.F.); +#95091 = EDGE_CURVE('',#95092,#79626,#95094,.T.); +#95092 = VERTEX_POINT('',#95093); +#95093 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,6.E-02)); +#95094 = LINE('',#95095,#95096); +#95095 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,6.E-02)); +#95096 = VECTOR('',#95097,1.); +#95097 = DIRECTION('',(-0.,-0.,-1.)); +#95098 = ORIENTED_EDGE('',*,*,#95099,.T.); +#95099 = EDGE_CURVE('',#95092,#95100,#95102,.T.); +#95100 = VERTEX_POINT('',#95101); +#95101 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,6.E-02)); +#95102 = LINE('',#95103,#95104); +#95103 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,6.E-02)); +#95104 = VECTOR('',#95105,1.); +#95105 = DIRECTION('',(0.363542485653,0.931577619485,0.)); +#95106 = ORIENTED_EDGE('',*,*,#95107,.T.); +#95107 = EDGE_CURVE('',#95100,#79634,#95108,.T.); +#95108 = LINE('',#95109,#95110); +#95109 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,6.E-02)); +#95110 = VECTOR('',#95111,1.); +#95111 = DIRECTION('',(-0.,-0.,-1.)); +#95112 = PLANE('',#95113); +#95113 = AXIS2_PLACEMENT_3D('',#95114,#95115,#95116); +#95114 = CARTESIAN_POINT('',(0.858092992441,-0.53100029163,6.E-02)); +#95115 = DIRECTION('',(-0.931577619485,0.363542485653,0.)); +#95116 = DIRECTION('',(-0.363542485653,-0.931577619485,0.)); +#95117 = ADVANCED_FACE('',(#95118),#95136,.T.); +#95118 = FACE_BOUND('',#95119,.T.); +#95119 = EDGE_LOOP('',(#95120,#95121,#95122,#95130)); +#95120 = ORIENTED_EDGE('',*,*,#79641,.F.); +#95121 = ORIENTED_EDGE('',*,*,#95107,.F.); +#95122 = ORIENTED_EDGE('',*,*,#95123,.T.); +#95123 = EDGE_CURVE('',#95100,#95124,#95126,.T.); +#95124 = VERTEX_POINT('',#95125); +#95125 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,6.E-02) + ); +#95126 = LINE('',#95127,#95128); +#95127 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,6.E-02)); +#95128 = VECTOR('',#95129,1.); +#95129 = DIRECTION('',(-1.,0.,0.)); +#95130 = ORIENTED_EDGE('',*,*,#95131,.T.); +#95131 = EDGE_CURVE('',#95124,#79642,#95132,.T.); +#95132 = LINE('',#95133,#95134); +#95133 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,6.E-02) + ); +#95134 = VECTOR('',#95135,1.); +#95135 = DIRECTION('',(-0.,-0.,-1.)); +#95136 = PLANE('',#95137); +#95137 = AXIS2_PLACEMENT_3D('',#95138,#95139,#95140); +#95138 = CARTESIAN_POINT('',(1.05321494366,-3.100029163022E-02,6.E-02)); +#95139 = DIRECTION('',(0.,-1.,0.)); +#95140 = DIRECTION('',(0.,-0.,-1.)); +#95141 = ADVANCED_FACE('',(#95142),#95160,.T.); +#95142 = FACE_BOUND('',#95143,.T.); +#95143 = EDGE_LOOP('',(#95144,#95145,#95146,#95154)); +#95144 = ORIENTED_EDGE('',*,*,#79649,.F.); +#95145 = ORIENTED_EDGE('',*,*,#95131,.F.); +#95146 = ORIENTED_EDGE('',*,*,#95147,.T.); +#95147 = EDGE_CURVE('',#95124,#95148,#95150,.T.); +#95148 = VERTEX_POINT('',#95149); +#95149 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,6.E-02)); +#95150 = LINE('',#95151,#95152); +#95151 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,6.E-02) + ); +#95152 = VECTOR('',#95153,1.); +#95153 = DIRECTION('',(-0.339330377275,-0.940667260544,0.)); +#95154 = ORIENTED_EDGE('',*,*,#95155,.T.); +#95155 = EDGE_CURVE('',#95148,#79650,#95156,.T.); +#95156 = LINE('',#95157,#95158); +#95157 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,6.E-02)); +#95158 = VECTOR('',#95159,1.); +#95159 = DIRECTION('',(-0.,-0.,-1.)); +#95160 = PLANE('',#95161); +#95161 = AXIS2_PLACEMENT_3D('',#95162,#95163,#95164); +#95162 = CARTESIAN_POINT('',(0.980044211953,-3.100029163022E-02,6.E-02) + ); +#95163 = DIRECTION('',(0.940667260544,-0.339330377275,0.)); +#95164 = DIRECTION('',(0.339330377275,0.940667260544,0.)); +#95165 = ADVANCED_FACE('',(#95166),#95184,.T.); +#95166 = FACE_BOUND('',#95167,.T.); +#95167 = EDGE_LOOP('',(#95168,#95169,#95170,#95178)); +#95168 = ORIENTED_EDGE('',*,*,#79657,.F.); +#95169 = ORIENTED_EDGE('',*,*,#95155,.F.); +#95170 = ORIENTED_EDGE('',*,*,#95171,.T.); +#95171 = EDGE_CURVE('',#95148,#95172,#95174,.T.); +#95172 = VERTEX_POINT('',#95173); +#95173 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,6.E-02)); +#95174 = LINE('',#95175,#95176); +#95175 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,6.E-02)); +#95176 = VECTOR('',#95177,1.); +#95177 = DIRECTION('',(-1.,0.,0.)); +#95178 = ORIENTED_EDGE('',*,*,#95179,.T.); +#95179 = EDGE_CURVE('',#95172,#79658,#95180,.T.); +#95180 = LINE('',#95181,#95182); +#95181 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,6.E-02)); +#95182 = VECTOR('',#95183,1.); +#95183 = DIRECTION('',(-0.,-0.,-1.)); +#95184 = PLANE('',#95185); +#95185 = AXIS2_PLACEMENT_3D('',#95186,#95187,#95188); +#95186 = CARTESIAN_POINT('',(0.929453510734,-0.171244194069,6.E-02)); +#95187 = DIRECTION('',(0.,-1.,0.)); +#95188 = DIRECTION('',(0.,-0.,-1.)); +#95189 = ADVANCED_FACE('',(#95190),#95208,.T.); +#95190 = FACE_BOUND('',#95191,.T.); +#95191 = EDGE_LOOP('',(#95192,#95193,#95194,#95202)); +#95192 = ORIENTED_EDGE('',*,*,#79665,.F.); +#95193 = ORIENTED_EDGE('',*,*,#95179,.F.); +#95194 = ORIENTED_EDGE('',*,*,#95195,.T.); +#95195 = EDGE_CURVE('',#95172,#95196,#95198,.T.); +#95196 = VERTEX_POINT('',#95197); +#95197 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,6.E-02) + ); +#95198 = LINE('',#95199,#95200); +#95199 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,6.E-02)); +#95200 = VECTOR('',#95201,1.); +#95201 = DIRECTION('',(-0.322202485606,0.946670776072,0.)); +#95202 = ORIENTED_EDGE('',*,*,#95203,.T.); +#95203 = EDGE_CURVE('',#95196,#79666,#95204,.T.); +#95204 = LINE('',#95205,#95206); +#95205 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,6.E-02) + ); +#95206 = VECTOR('',#95207,1.); +#95207 = DIRECTION('',(-0.,-0.,-1.)); +#95208 = PLANE('',#95209); +#95209 = AXIS2_PLACEMENT_3D('',#95210,#95211,#95212); +#95210 = CARTESIAN_POINT('',(0.722898632685,-0.171244194069,6.E-02)); +#95211 = DIRECTION('',(-0.946670776072,-0.322202485606,0.)); +#95212 = DIRECTION('',(0.322202485606,-0.946670776072,0.)); +#95213 = ADVANCED_FACE('',(#95214),#95232,.T.); +#95214 = FACE_BOUND('',#95215,.T.); +#95215 = EDGE_LOOP('',(#95216,#95217,#95218,#95226)); +#95216 = ORIENTED_EDGE('',*,*,#79673,.F.); +#95217 = ORIENTED_EDGE('',*,*,#95203,.F.); +#95218 = ORIENTED_EDGE('',*,*,#95219,.T.); +#95219 = EDGE_CURVE('',#95196,#95220,#95222,.T.); +#95220 = VERTEX_POINT('',#95221); +#95221 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,6.E-02) + ); +#95222 = LINE('',#95223,#95224); +#95223 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,6.E-02) + ); +#95224 = VECTOR('',#95225,1.); +#95225 = DIRECTION('',(-1.,0.,0.)); +#95226 = ORIENTED_EDGE('',*,*,#95227,.T.); +#95227 = EDGE_CURVE('',#95220,#79674,#95228,.T.); +#95228 = LINE('',#95229,#95230); +#95229 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,6.E-02) + ); +#95230 = VECTOR('',#95231,1.); +#95231 = DIRECTION('',(-0.,-0.,-1.)); +#95232 = PLANE('',#95233); +#95233 = AXIS2_PLACEMENT_3D('',#95234,#95235,#95236); +#95234 = CARTESIAN_POINT('',(0.675166163173,-3.100029163022E-02,6.E-02) + ); +#95235 = DIRECTION('',(0.,-1.,0.)); +#95236 = DIRECTION('',(0.,-0.,-1.)); +#95237 = ADVANCED_FACE('',(#95238),#95256,.T.); +#95238 = FACE_BOUND('',#95239,.T.); +#95239 = EDGE_LOOP('',(#95240,#95241,#95242,#95250)); +#95240 = ORIENTED_EDGE('',*,*,#79681,.F.); +#95241 = ORIENTED_EDGE('',*,*,#95227,.F.); +#95242 = ORIENTED_EDGE('',*,*,#95243,.T.); +#95243 = EDGE_CURVE('',#95220,#95244,#95246,.T.); +#95244 = VERTEX_POINT('',#95245); +#95245 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,6.E-02)); +#95246 = LINE('',#95247,#95248); +#95247 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,6.E-02) + ); +#95248 = VECTOR('',#95249,1.); +#95249 = DIRECTION('',(0.353622392329,-0.93538826358,0.)); +#95250 = ORIENTED_EDGE('',*,*,#95251,.T.); +#95251 = EDGE_CURVE('',#95244,#79624,#95252,.T.); +#95252 = LINE('',#95253,#95254); +#95253 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,6.E-02)); +#95254 = VECTOR('',#95255,1.); +#95255 = DIRECTION('',(-0.,-0.,-1.)); +#95256 = PLANE('',#95257); +#95257 = AXIS2_PLACEMENT_3D('',#95258,#95259,#95260); +#95258 = CARTESIAN_POINT('',(0.601995431465,-3.100029163022E-02,6.E-02) + ); +#95259 = DIRECTION('',(0.93538826358,0.353622392329,-0.)); +#95260 = DIRECTION('',(-0.353622392329,0.93538826358,0.)); +#95261 = ADVANCED_FACE('',(#95262),#95273,.T.); +#95262 = FACE_BOUND('',#95263,.T.); +#95263 = EDGE_LOOP('',(#95264,#95265,#95266,#95272)); +#95264 = ORIENTED_EDGE('',*,*,#79623,.F.); +#95265 = ORIENTED_EDGE('',*,*,#95251,.F.); +#95266 = ORIENTED_EDGE('',*,*,#95267,.T.); +#95267 = EDGE_CURVE('',#95244,#95092,#95268,.T.); +#95268 = LINE('',#95269,#95270); +#95269 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,6.E-02)); +#95270 = VECTOR('',#95271,1.); +#95271 = DIRECTION('',(1.,0.,0.)); +#95272 = ORIENTED_EDGE('',*,*,#95091,.T.); +#95273 = PLANE('',#95274); +#95274 = AXIS2_PLACEMENT_3D('',#95275,#95276,#95277); +#95275 = CARTESIAN_POINT('',(0.791019821709,-0.53100029163,6.E-02)); +#95276 = DIRECTION('',(0.,1.,0.)); +#95277 = DIRECTION('',(0.,-0.,1.)); +#95278 = ADVANCED_FACE('',(#95279,#95337),#95347,.F.); +#95279 = FACE_BOUND('',#95280,.T.); +#95280 = EDGE_LOOP('',(#95281,#95291,#95299,#95311,#95319,#95331)); +#95281 = ORIENTED_EDGE('',*,*,#95282,.F.); +#95282 = EDGE_CURVE('',#95283,#95285,#95287,.T.); +#95283 = VERTEX_POINT('',#95284); +#95284 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,6.E-02)); +#95285 = VERTEX_POINT('',#95286); +#95286 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,6.E-02)); +#95287 = LINE('',#95288,#95289); +#95288 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,6.E-02)); +#95289 = VECTOR('',#95290,1.); +#95290 = DIRECTION('',(1.,0.,0.)); +#95291 = ORIENTED_EDGE('',*,*,#95292,.F.); +#95292 = EDGE_CURVE('',#95293,#95283,#95295,.T.); +#95293 = VERTEX_POINT('',#95294); +#95294 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95295 = LINE('',#95296,#95297); +#95296 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95297 = VECTOR('',#95298,1.); +#95298 = DIRECTION('',(-0.336390827665,0.941722470297,0.)); +#95299 = ORIENTED_EDGE('',*,*,#95300,.F.); +#95300 = EDGE_CURVE('',#95301,#95293,#95303,.T.); +#95301 = VERTEX_POINT('',#95302); +#95302 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,6.E-02)); +#95303 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95304,#95305,#95306,#95307, + #95308,#95309,#95310),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.30057486777,0.568347412612,0.800011154954,1.),.UNSPECIFIED.); +#95304 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,6.E-02)); +#95305 = CARTESIAN_POINT('',(0.821798462787,-0.466460655839,6.E-02)); +#95306 = CARTESIAN_POINT('',(0.820727033964,-0.459721552899,6.E-02)); +#95307 = CARTESIAN_POINT('',(0.818663701503,-0.450342959208,6.E-02)); +#95308 = CARTESIAN_POINT('',(0.816779643926,-0.442153933242,6.E-02)); +#95309 = CARTESIAN_POINT('',(0.815127501148,-0.43724025925,6.E-02)); +#95310 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95311 = ORIENTED_EDGE('',*,*,#95312,.F.); +#95312 = EDGE_CURVE('',#95313,#95301,#95315,.T.); +#95313 = VERTEX_POINT('',#95314); +#95314 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95315 = LINE('',#95316,#95317); +#95316 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95317 = VECTOR('',#95318,1.); +#95318 = DIRECTION('',(-1.,0.,0.)); +#95319 = ORIENTED_EDGE('',*,*,#95320,.F.); +#95320 = EDGE_CURVE('',#95321,#95313,#95323,.T.); +#95321 = VERTEX_POINT('',#95322); +#95322 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,6.E-02)); +#95323 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95324,#95325,#95326,#95327, + #95328,#95329,#95330),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.174481715317,0.398285759128,0.673897847399,1.),.UNSPECIFIED.); +#95324 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,6.E-02)); +#95325 = CARTESIAN_POINT('',(0.831078033782,-0.436958623491,6.E-02)); +#95326 = CARTESIAN_POINT('',(0.82965375033,-0.441512379284,6.E-02)); +#95327 = CARTESIAN_POINT('',(0.827787346346,-0.449371909071,6.E-02)); +#95328 = CARTESIAN_POINT('',(0.825957454372,-0.459088735061,6.E-02)); +#95329 = CARTESIAN_POINT('',(0.824678108735,-0.466180994889,6.E-02)); +#95330 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95331 = ORIENTED_EDGE('',*,*,#95332,.F.); +#95332 = EDGE_CURVE('',#95285,#95321,#95333,.T.); +#95333 = LINE('',#95334,#95335); +#95334 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,6.E-02)); +#95335 = VECTOR('',#95336,1.); +#95336 = DIRECTION('',(-0.339053795485,-0.940766986967,0.)); +#95337 = FACE_BOUND('',#95338,.T.); +#95338 = EDGE_LOOP('',(#95339,#95340,#95341,#95342,#95343,#95344,#95345, + #95346)); +#95339 = ORIENTED_EDGE('',*,*,#95099,.F.); +#95340 = ORIENTED_EDGE('',*,*,#95267,.F.); +#95341 = ORIENTED_EDGE('',*,*,#95243,.F.); +#95342 = ORIENTED_EDGE('',*,*,#95219,.F.); +#95343 = ORIENTED_EDGE('',*,*,#95195,.F.); +#95344 = ORIENTED_EDGE('',*,*,#95171,.F.); +#95345 = ORIENTED_EDGE('',*,*,#95147,.F.); +#95346 = ORIENTED_EDGE('',*,*,#95123,.F.); +#95347 = PLANE('',#95348); +#95348 = AXIS2_PLACEMENT_3D('',#95349,#95350,#95351); +#95349 = CARTESIAN_POINT('',(0.,0.,6.E-02)); +#95350 = DIRECTION('',(0.,-0.,1.)); +#95351 = DIRECTION('',(1.,0.,0.)); +#95352 = ADVANCED_FACE('',(#95353),#95378,.T.); +#95353 = FACE_BOUND('',#95354,.T.); +#95354 = EDGE_LOOP('',(#95355,#95365,#95371,#95372)); +#95355 = ORIENTED_EDGE('',*,*,#95356,.F.); +#95356 = EDGE_CURVE('',#95357,#95359,#95361,.T.); +#95357 = VERTEX_POINT('',#95358); +#95358 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,5.E-02)); +#95359 = VERTEX_POINT('',#95360); +#95360 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,5.E-02)); +#95361 = LINE('',#95362,#95363); +#95362 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,5.E-02)); +#95363 = VECTOR('',#95364,1.); +#95364 = DIRECTION('',(1.,0.,0.)); +#95365 = ORIENTED_EDGE('',*,*,#95366,.F.); +#95366 = EDGE_CURVE('',#95283,#95357,#95367,.T.); +#95367 = LINE('',#95368,#95369); +#95368 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,6.E-02)); +#95369 = VECTOR('',#95370,1.); +#95370 = DIRECTION('',(-0.,-0.,-1.)); +#95371 = ORIENTED_EDGE('',*,*,#95282,.T.); +#95372 = ORIENTED_EDGE('',*,*,#95373,.T.); +#95373 = EDGE_CURVE('',#95285,#95359,#95374,.T.); +#95374 = LINE('',#95375,#95376); +#95375 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,6.E-02)); +#95376 = VECTOR('',#95377,1.); +#95377 = DIRECTION('',(-0.,-0.,-1.)); +#95378 = PLANE('',#95379); +#95379 = AXIS2_PLACEMENT_3D('',#95380,#95381,#95382); +#95380 = CARTESIAN_POINT('',(0.739762199758,-0.22612224285,6.E-02)); +#95381 = DIRECTION('',(0.,1.,0.)); +#95382 = DIRECTION('',(0.,-0.,1.)); +#95383 = ADVANCED_FACE('',(#95384),#95402,.T.); +#95384 = FACE_BOUND('',#95385,.T.); +#95385 = EDGE_LOOP('',(#95386,#95394,#95400,#95401)); +#95386 = ORIENTED_EDGE('',*,*,#95387,.F.); +#95387 = EDGE_CURVE('',#95388,#95357,#95390,.T.); +#95388 = VERTEX_POINT('',#95389); +#95389 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,5.E-02)); +#95390 = LINE('',#95391,#95392); +#95391 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,5.E-02)); +#95392 = VECTOR('',#95393,1.); +#95393 = DIRECTION('',(-0.336390827665,0.941722470297,0.)); +#95394 = ORIENTED_EDGE('',*,*,#95395,.F.); +#95395 = EDGE_CURVE('',#95293,#95388,#95396,.T.); +#95396 = LINE('',#95397,#95398); +#95397 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95398 = VECTOR('',#95399,1.); +#95399 = DIRECTION('',(-0.,-0.,-1.)); +#95400 = ORIENTED_EDGE('',*,*,#95292,.T.); +#95401 = ORIENTED_EDGE('',*,*,#95366,.T.); +#95402 = PLANE('',#95403); +#95403 = AXIS2_PLACEMENT_3D('',#95404,#95405,#95406); +#95404 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95405 = DIRECTION('',(-0.941722470297,-0.336390827665,0.)); +#95406 = DIRECTION('',(0.336390827665,-0.941722470297,0.)); +#95407 = ADVANCED_FACE('',(#95408),#95430,.T.); +#95408 = FACE_BOUND('',#95409,.T.); +#95409 = EDGE_LOOP('',(#95410,#95422,#95428,#95429)); +#95410 = ORIENTED_EDGE('',*,*,#95411,.F.); +#95411 = EDGE_CURVE('',#95412,#95388,#95414,.T.); +#95412 = VERTEX_POINT('',#95413); +#95413 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,5.E-02)); +#95414 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95415,#95416,#95417,#95418, + #95419,#95420,#95421),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.30057486777,0.568347412612,0.800011154954,1.),.UNSPECIFIED.); +#95415 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,5.E-02)); +#95416 = CARTESIAN_POINT('',(0.821798462787,-0.466460655839,5.E-02)); +#95417 = CARTESIAN_POINT('',(0.820727033964,-0.459721552899,5.E-02)); +#95418 = CARTESIAN_POINT('',(0.818663701503,-0.450342959208,5.E-02)); +#95419 = CARTESIAN_POINT('',(0.816779643926,-0.442153933242,5.E-02)); +#95420 = CARTESIAN_POINT('',(0.815127501148,-0.43724025925,5.E-02)); +#95421 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,5.E-02)); +#95422 = ORIENTED_EDGE('',*,*,#95423,.F.); +#95423 = EDGE_CURVE('',#95301,#95412,#95424,.T.); +#95424 = LINE('',#95425,#95426); +#95425 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,6.E-02)); +#95426 = VECTOR('',#95427,1.); +#95427 = DIRECTION('',(-0.,-0.,-1.)); +#95428 = ORIENTED_EDGE('',*,*,#95300,.T.); +#95429 = ORIENTED_EDGE('',*,*,#95395,.T.); +#95430 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95431,#95432) + ,(#95433,#95434) + ,(#95435,#95436) + ,(#95437,#95438) + ,(#95439,#95440) + ,(#95441,#95442) + ,(#95443,#95444 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,4),(2,2),(0.,0.30057486777, + 0.568347412612,0.800011154954,1.),(0.,1.),.UNSPECIFIED.); +#95431 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,6.E-02)); +#95432 = CARTESIAN_POINT('',(0.8223650961,-0.470024681874,5.E-02)); +#95433 = CARTESIAN_POINT('',(0.821798462787,-0.466460655839,6.E-02)); +#95434 = CARTESIAN_POINT('',(0.821798462787,-0.466460655839,5.E-02)); +#95435 = CARTESIAN_POINT('',(0.820727033964,-0.459721552899,6.E-02)); +#95436 = CARTESIAN_POINT('',(0.820727033964,-0.459721552899,5.E-02)); +#95437 = CARTESIAN_POINT('',(0.818663701503,-0.450342959208,6.E-02)); +#95438 = CARTESIAN_POINT('',(0.818663701503,-0.450342959208,5.E-02)); +#95439 = CARTESIAN_POINT('',(0.816779643926,-0.442153933242,6.E-02)); +#95440 = CARTESIAN_POINT('',(0.816779643926,-0.442153933242,5.E-02)); +#95441 = CARTESIAN_POINT('',(0.815127501148,-0.43724025925,6.E-02)); +#95442 = CARTESIAN_POINT('',(0.815127501148,-0.43724025925,5.E-02)); +#95443 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,6.E-02)); +#95444 = CARTESIAN_POINT('',(0.814362047319,-0.434963706264,5.E-02)); +#95445 = ADVANCED_FACE('',(#95446),#95464,.T.); +#95446 = FACE_BOUND('',#95447,.T.); +#95447 = EDGE_LOOP('',(#95448,#95456,#95462,#95463)); +#95448 = ORIENTED_EDGE('',*,*,#95449,.F.); +#95449 = EDGE_CURVE('',#95450,#95412,#95452,.T.); +#95450 = VERTEX_POINT('',#95451); +#95451 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,5.E-02)); +#95452 = LINE('',#95453,#95454); +#95453 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,5.E-02)); +#95454 = VECTOR('',#95455,1.); +#95455 = DIRECTION('',(-1.,0.,0.)); +#95456 = ORIENTED_EDGE('',*,*,#95457,.F.); +#95457 = EDGE_CURVE('',#95313,#95450,#95458,.T.); +#95458 = LINE('',#95459,#95460); +#95459 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95460 = VECTOR('',#95461,1.); +#95461 = DIRECTION('',(-0.,-0.,-1.)); +#95462 = ORIENTED_EDGE('',*,*,#95312,.T.); +#95463 = ORIENTED_EDGE('',*,*,#95423,.T.); +#95464 = PLANE('',#95465); +#95465 = AXIS2_PLACEMENT_3D('',#95466,#95467,#95468); +#95466 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95467 = DIRECTION('',(0.,-1.,0.)); +#95468 = DIRECTION('',(0.,-0.,-1.)); +#95469 = ADVANCED_FACE('',(#95470),#95492,.T.); +#95470 = FACE_BOUND('',#95471,.T.); +#95471 = EDGE_LOOP('',(#95472,#95484,#95490,#95491)); +#95472 = ORIENTED_EDGE('',*,*,#95473,.F.); +#95473 = EDGE_CURVE('',#95474,#95450,#95476,.T.); +#95474 = VERTEX_POINT('',#95475); +#95475 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,5.E-02)); +#95476 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95477,#95478,#95479,#95480, + #95481,#95482,#95483),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0., + 0.174481715317,0.398285759128,0.673897847399,1.),.UNSPECIFIED.); +#95477 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,5.E-02)); +#95478 = CARTESIAN_POINT('',(0.831078033782,-0.436958623491,5.E-02)); +#95479 = CARTESIAN_POINT('',(0.82965375033,-0.441512379284,5.E-02)); +#95480 = CARTESIAN_POINT('',(0.827787346346,-0.449371909071,5.E-02)); +#95481 = CARTESIAN_POINT('',(0.825957454372,-0.459088735061,5.E-02)); +#95482 = CARTESIAN_POINT('',(0.824678108735,-0.466180994889,5.E-02)); +#95483 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,5.E-02)); +#95484 = ORIENTED_EDGE('',*,*,#95485,.F.); +#95485 = EDGE_CURVE('',#95321,#95474,#95486,.T.); +#95486 = LINE('',#95487,#95488); +#95487 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,6.E-02)); +#95488 = VECTOR('',#95489,1.); +#95489 = DIRECTION('',(-0.,-0.,-1.)); +#95490 = ORIENTED_EDGE('',*,*,#95320,.T.); +#95491 = ORIENTED_EDGE('',*,*,#95457,.T.); +#95492 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95493,#95494) + ,(#95495,#95496) + ,(#95497,#95498) + ,(#95499,#95500) + ,(#95501,#95502) + ,(#95503,#95504) + ,(#95505,#95506 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,4),(2,2),(0.,0.174481715317, + 0.398285759128,0.673897847399,1.),(0.,1.),.UNSPECIFIED.); +#95493 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,6.E-02)); +#95494 = CARTESIAN_POINT('',(0.831701986343,-0.434963706264,5.E-02)); +#95495 = CARTESIAN_POINT('',(0.831078033782,-0.436958623491,6.E-02)); +#95496 = CARTESIAN_POINT('',(0.831078033782,-0.436958623491,5.E-02)); +#95497 = CARTESIAN_POINT('',(0.82965375033,-0.441512379284,6.E-02)); +#95498 = CARTESIAN_POINT('',(0.82965375033,-0.441512379284,5.E-02)); +#95499 = CARTESIAN_POINT('',(0.827787346346,-0.449371909071,6.E-02)); +#95500 = CARTESIAN_POINT('',(0.827787346346,-0.449371909071,5.E-02)); +#95501 = CARTESIAN_POINT('',(0.825957454372,-0.459088735061,6.E-02)); +#95502 = CARTESIAN_POINT('',(0.825957454372,-0.459088735061,5.E-02)); +#95503 = CARTESIAN_POINT('',(0.824678108735,-0.466180994889,6.E-02)); +#95504 = CARTESIAN_POINT('',(0.824678108735,-0.466180994889,5.E-02)); +#95505 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,6.E-02)); +#95506 = CARTESIAN_POINT('',(0.823984760734,-0.470024681874,5.E-02)); +#95507 = ADVANCED_FACE('',(#95508),#95519,.T.); +#95508 = FACE_BOUND('',#95509,.T.); +#95509 = EDGE_LOOP('',(#95510,#95516,#95517,#95518)); +#95510 = ORIENTED_EDGE('',*,*,#95511,.F.); +#95511 = EDGE_CURVE('',#95359,#95474,#95512,.T.); +#95512 = LINE('',#95513,#95514); +#95513 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,5.E-02)); +#95514 = VECTOR('',#95515,1.); +#95515 = DIRECTION('',(-0.339053795485,-0.940766986967,0.)); +#95516 = ORIENTED_EDGE('',*,*,#95373,.F.); +#95517 = ORIENTED_EDGE('',*,*,#95332,.T.); +#95518 = ORIENTED_EDGE('',*,*,#95485,.T.); +#95519 = PLANE('',#95520); +#95520 = AXIS2_PLACEMENT_3D('',#95521,#95522,#95523); +#95521 = CARTESIAN_POINT('',(0.906968754636,-0.22612224285,6.E-02)); +#95522 = DIRECTION('',(0.940766986967,-0.339053795485,0.)); +#95523 = DIRECTION('',(0.339053795485,0.940766986967,0.)); +#95524 = ADVANCED_FACE('',(#95525),#95550,.T.); +#95525 = FACE_BOUND('',#95526,.T.); +#95526 = EDGE_LOOP('',(#95527,#95528,#95536,#95544)); +#95527 = ORIENTED_EDGE('',*,*,#79849,.F.); +#95528 = ORIENTED_EDGE('',*,*,#95529,.F.); +#95529 = EDGE_CURVE('',#95530,#79826,#95532,.T.); +#95530 = VERTEX_POINT('',#95531); +#95531 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95532 = LINE('',#95533,#95534); +#95533 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95534 = VECTOR('',#95535,1.); +#95535 = DIRECTION('',(-0.,-0.,-1.)); +#95536 = ORIENTED_EDGE('',*,*,#95537,.T.); +#95537 = EDGE_CURVE('',#95530,#95538,#95540,.T.); +#95538 = VERTEX_POINT('',#95539); +#95539 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,6.E-02) + ); +#95540 = LINE('',#95541,#95542); +#95541 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95542 = VECTOR('',#95543,1.); +#95543 = DIRECTION('',(-1.,0.,0.)); +#95544 = ORIENTED_EDGE('',*,*,#95545,.T.); +#95545 = EDGE_CURVE('',#95538,#79850,#95546,.T.); +#95546 = LINE('',#95547,#95548); +#95547 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,6.E-02) + ); +#95548 = VECTOR('',#95549,1.); +#95549 = DIRECTION('',(-0.,-0.,-1.)); +#95550 = PLANE('',#95551); +#95551 = AXIS2_PLACEMENT_3D('',#95552,#95553,#95554); +#95552 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95553 = DIRECTION('',(0.,-1.,0.)); +#95554 = DIRECTION('',(0.,-0.,-1.)); +#95555 = ADVANCED_FACE('',(#95556),#95574,.T.); +#95556 = FACE_BOUND('',#95557,.T.); +#95557 = EDGE_LOOP('',(#95558,#95559,#95560,#95568)); +#95558 = ORIENTED_EDGE('',*,*,#79857,.F.); +#95559 = ORIENTED_EDGE('',*,*,#95545,.F.); +#95560 = ORIENTED_EDGE('',*,*,#95561,.T.); +#95561 = EDGE_CURVE('',#95538,#95562,#95564,.T.); +#95562 = VERTEX_POINT('',#95563); +#95563 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,6.E-02)); +#95564 = LINE('',#95565,#95566); +#95565 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,6.E-02) + ); +#95566 = VECTOR('',#95567,1.); +#95567 = DIRECTION('',(0.,-1.,0.)); +#95568 = ORIENTED_EDGE('',*,*,#95569,.T.); +#95569 = EDGE_CURVE('',#95562,#79858,#95570,.T.); +#95570 = LINE('',#95571,#95572); +#95571 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,6.E-02)); +#95572 = VECTOR('',#95573,1.); +#95573 = DIRECTION('',(-0.,-0.,-1.)); +#95574 = PLANE('',#95575); +#95575 = AXIS2_PLACEMENT_3D('',#95576,#95577,#95578); +#95576 = CARTESIAN_POINT('',(0.162971041221,-3.100029163022E-02,6.E-02) + ); +#95577 = DIRECTION('',(1.,0.,-0.)); +#95578 = DIRECTION('',(-0.,0.,-1.)); +#95579 = ADVANCED_FACE('',(#95580),#95598,.T.); +#95580 = FACE_BOUND('',#95581,.T.); +#95581 = EDGE_LOOP('',(#95582,#95583,#95584,#95592)); +#95582 = ORIENTED_EDGE('',*,*,#79865,.F.); +#95583 = ORIENTED_EDGE('',*,*,#95569,.F.); +#95584 = ORIENTED_EDGE('',*,*,#95585,.T.); +#95585 = EDGE_CURVE('',#95562,#95586,#95588,.T.); +#95586 = VERTEX_POINT('',#95587); +#95587 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,6.E-02)); +#95588 = LINE('',#95589,#95590); +#95589 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,6.E-02)); +#95590 = VECTOR('',#95591,1.); +#95591 = DIRECTION('',(1.,0.,0.)); +#95592 = ORIENTED_EDGE('',*,*,#95593,.T.); +#95593 = EDGE_CURVE('',#95586,#79866,#95594,.T.); +#95594 = LINE('',#95595,#95596); +#95595 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,6.E-02)); +#95596 = VECTOR('',#95597,1.); +#95597 = DIRECTION('',(-0.,-0.,-1.)); +#95598 = PLANE('',#95599); +#95599 = AXIS2_PLACEMENT_3D('',#95600,#95601,#95602); +#95600 = CARTESIAN_POINT('',(0.162971041221,-0.53100029163,6.E-02)); +#95601 = DIRECTION('',(0.,1.,0.)); +#95602 = DIRECTION('',(0.,-0.,1.)); +#95603 = ADVANCED_FACE('',(#95604),#95638,.T.); +#95604 = FACE_BOUND('',#95605,.T.); +#95605 = EDGE_LOOP('',(#95606,#95607,#95608,#95632)); +#95606 = ORIENTED_EDGE('',*,*,#79873,.F.); +#95607 = ORIENTED_EDGE('',*,*,#95593,.F.); +#95608 = ORIENTED_EDGE('',*,*,#95609,.T.); +#95609 = EDGE_CURVE('',#95586,#95610,#95612,.T.); +#95610 = VERTEX_POINT('',#95611); +#95611 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95612 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95613,#95614,#95615,#95616, + #95617,#95618,#95619,#95620,#95621,#95622,#95623,#95624,#95625, + #95626,#95627,#95628,#95629,#95630,#95631),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.862671829589E-02, + 0.134557720485,0.198315264547,0.26077281776,0.32197822457, + 0.382585954504,0.443397729587,0.504989681879,0.566066157504, + 0.625954254942,0.685393604693,0.744932810825,0.805428487954, + 0.867644868743,0.932312181659,1.),.UNSPECIFIED.); +#95613 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,6.E-02)); +#95614 = CARTESIAN_POINT('',(0.313258318012,-0.530795494298,6.E-02)); +#95615 = CARTESIAN_POINT('',(0.331269297503,-0.530393944249,6.E-02)); +#95616 = CARTESIAN_POINT('',(0.357681753256,-0.527345191168,6.E-02)); +#95617 = CARTESIAN_POINT('',(0.382878284555,-0.522050730865,6.E-02)); +#95618 = CARTESIAN_POINT('',(0.406936372634,-0.514840970366,6.E-02)); +#95619 = CARTESIAN_POINT('',(0.429840384989,-0.505589527854,6.E-02)); +#95620 = CARTESIAN_POINT('',(0.451498585534,-0.494172472306,6.E-02)); +#95621 = CARTESIAN_POINT('',(0.471974356772,-0.480662672398,6.E-02)); +#95622 = CARTESIAN_POINT('',(0.491123966552,-0.465231522785,6.E-02)); +#95623 = CARTESIAN_POINT('',(0.508569906058,-0.448058092302,6.E-02)); +#95624 = CARTESIAN_POINT('',(0.523804943871,-0.429267229268,6.E-02)); +#95625 = CARTESIAN_POINT('',(0.536806448629,-0.409094778601,6.E-02)); +#95626 = CARTESIAN_POINT('',(0.547145542501,-0.387357818882,6.E-02)); +#95627 = CARTESIAN_POINT('',(0.555459027441,-0.364376420639,6.E-02)); +#95628 = CARTESIAN_POINT('',(0.56117501854,-0.339914393727,6.E-02)); +#95629 = CARTESIAN_POINT('',(0.56482309372,-0.314075475623,6.E-02)); +#95630 = CARTESIAN_POINT('',(0.565211454029,-0.296352248017,6.E-02)); +#95631 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95632 = ORIENTED_EDGE('',*,*,#95633,.T.); +#95633 = EDGE_CURVE('',#95610,#79824,#95634,.T.); +#95634 = LINE('',#95635,#95636); +#95635 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95636 = VECTOR('',#95637,1.); +#95637 = DIRECTION('',(-0.,-0.,-1.)); +#95638 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95639,#95640) + ,(#95641,#95642) + ,(#95643,#95644) + ,(#95645,#95646) + ,(#95647,#95648) + ,(#95649,#95650) + ,(#95651,#95652) + ,(#95653,#95654) + ,(#95655,#95656) + ,(#95657,#95658) + ,(#95659,#95660) + ,(#95661,#95662) + ,(#95663,#95664) + ,(#95665,#95666) + ,(#95667,#95668) + ,(#95669,#95670) + ,(#95671,#95672) + ,(#95673,#95674) + ,(#95675,#95676 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.862671829589E-02,0.134557720485,0.198315264547, + 0.26077281776,0.32197822457,0.382585954504,0.443397729587, + 0.504989681879,0.566066157504,0.625954254942,0.685393604693, + 0.744932810825,0.805428487954,0.867644868743,0.932312181659,1.),(0., + 1.),.UNSPECIFIED.); +#95639 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,6.E-02)); +#95640 = CARTESIAN_POINT('',(0.304072413173,-0.53100029163,5.E-02)); +#95641 = CARTESIAN_POINT('',(0.313258318012,-0.530795494298,6.E-02)); +#95642 = CARTESIAN_POINT('',(0.313258318012,-0.530795494298,5.E-02)); +#95643 = CARTESIAN_POINT('',(0.331269297503,-0.530393944249,6.E-02)); +#95644 = CARTESIAN_POINT('',(0.331269297503,-0.530393944249,5.E-02)); +#95645 = CARTESIAN_POINT('',(0.357681753256,-0.527345191168,6.E-02)); +#95646 = CARTESIAN_POINT('',(0.357681753256,-0.527345191168,5.E-02)); +#95647 = CARTESIAN_POINT('',(0.382878284555,-0.522050730865,6.E-02)); +#95648 = CARTESIAN_POINT('',(0.382878284555,-0.522050730865,5.E-02)); +#95649 = CARTESIAN_POINT('',(0.406936372634,-0.514840970366,6.E-02)); +#95650 = CARTESIAN_POINT('',(0.406936372634,-0.514840970366,5.E-02)); +#95651 = CARTESIAN_POINT('',(0.429840384989,-0.505589527854,6.E-02)); +#95652 = CARTESIAN_POINT('',(0.429840384989,-0.505589527854,5.E-02)); +#95653 = CARTESIAN_POINT('',(0.451498585534,-0.494172472306,6.E-02)); +#95654 = CARTESIAN_POINT('',(0.451498585534,-0.494172472306,5.E-02)); +#95655 = CARTESIAN_POINT('',(0.471974356772,-0.480662672398,6.E-02)); +#95656 = CARTESIAN_POINT('',(0.471974356772,-0.480662672398,5.E-02)); +#95657 = CARTESIAN_POINT('',(0.491123966552,-0.465231522785,6.E-02)); +#95658 = CARTESIAN_POINT('',(0.491123966552,-0.465231522785,5.E-02)); +#95659 = CARTESIAN_POINT('',(0.508569906058,-0.448058092302,6.E-02)); +#95660 = CARTESIAN_POINT('',(0.508569906058,-0.448058092302,5.E-02)); +#95661 = CARTESIAN_POINT('',(0.523804943871,-0.429267229268,6.E-02)); +#95662 = CARTESIAN_POINT('',(0.523804943871,-0.429267229268,5.E-02)); +#95663 = CARTESIAN_POINT('',(0.536806448629,-0.409094778601,6.E-02)); +#95664 = CARTESIAN_POINT('',(0.536806448629,-0.409094778601,5.E-02)); +#95665 = CARTESIAN_POINT('',(0.547145542501,-0.387357818882,6.E-02)); +#95666 = CARTESIAN_POINT('',(0.547145542501,-0.387357818882,5.E-02)); +#95667 = CARTESIAN_POINT('',(0.555459027441,-0.364376420639,6.E-02)); +#95668 = CARTESIAN_POINT('',(0.555459027441,-0.364376420639,5.E-02)); +#95669 = CARTESIAN_POINT('',(0.56117501854,-0.339914393727,6.E-02)); +#95670 = CARTESIAN_POINT('',(0.56117501854,-0.339914393727,5.E-02)); +#95671 = CARTESIAN_POINT('',(0.56482309372,-0.314075475623,6.E-02)); +#95672 = CARTESIAN_POINT('',(0.56482309372,-0.314075475623,5.E-02)); +#95673 = CARTESIAN_POINT('',(0.565211454029,-0.296352248017,6.E-02)); +#95674 = CARTESIAN_POINT('',(0.565211454029,-0.296352248017,5.E-02)); +#95675 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95676 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,5.E-02)); +#95677 = ADVANCED_FACE('',(#95678),#95705,.T.); +#95678 = FACE_BOUND('',#95679,.T.); +#95679 = EDGE_LOOP('',(#95680,#95681,#95682,#95704)); +#95680 = ORIENTED_EDGE('',*,*,#79823,.F.); +#95681 = ORIENTED_EDGE('',*,*,#95633,.F.); +#95682 = ORIENTED_EDGE('',*,*,#95683,.T.); +#95683 = EDGE_CURVE('',#95610,#95530,#95684,.T.); +#95684 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95685,#95686,#95687,#95688, + #95689,#95690,#95691,#95692,#95693,#95694,#95695,#95696,#95697, + #95698,#95699,#95700,#95701,#95702,#95703),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.807022544602E-02, + 0.133430431124,0.196150441495,0.257127947319,0.316867312535, + 0.3761731907,0.435947660585,0.496523923289,0.557455399094, + 0.617678272287,0.67793640363,0.738799415387,0.800944863813, + 0.864811629662,0.931023231107,1.),.UNSPECIFIED.); +#95685 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95686 = CARTESIAN_POINT('',(0.565209148654,-0.277844238657,6.E-02)); +#95687 = CARTESIAN_POINT('',(0.564815313669,-0.259331905309,6.E-02)); +#95688 = CARTESIAN_POINT('',(0.561183126496,-0.232321018061,6.E-02)); +#95689 = CARTESIAN_POINT('',(0.555456825467,-0.206693842473,6.E-02)); +#95690 = CARTESIAN_POINT('',(0.547165726226,-0.182597767781,6.E-02)); +#95691 = CARTESIAN_POINT('',(0.536846100542,-0.159807689544,6.E-02)); +#95692 = CARTESIAN_POINT('',(0.523792662075,-0.138655204787,6.E-02)); +#95693 = CARTESIAN_POINT('',(0.508625052549,-0.118836424073,6.E-02)); +#95694 = CARTESIAN_POINT('',(0.491170576473,-0.100667149091,6.E-02)); +#95695 = CARTESIAN_POINT('',(0.471871932529,-8.440396103474E-02,6.E-02) + ); +#95696 = CARTESIAN_POINT('',(0.451234267029,-6.99406626739E-02,6.E-02)); +#95697 = CARTESIAN_POINT('',(0.429081744583,-5.792347100819E-02,6.E-02) + ); +#95698 = CARTESIAN_POINT('',(0.405603172368,-4.810488503672E-02,6.E-02) + ); +#95699 = CARTESIAN_POINT('',(0.380839721541,-4.030950634431E-02,6.E-02) + ); +#95700 = CARTESIAN_POINT('',(0.354684041292,-3.500201771844E-02,6.E-02) + ); +#95701 = CARTESIAN_POINT('',(0.327255011408,-3.151280824727E-02,6.E-02) + ); +#95702 = CARTESIAN_POINT('',(0.308497954616,-3.117344430644E-02,6.E-02) + ); +#95703 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95704 = ORIENTED_EDGE('',*,*,#95529,.T.); +#95705 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95706,#95707) + ,(#95708,#95709) + ,(#95710,#95711) + ,(#95712,#95713) + ,(#95714,#95715) + ,(#95716,#95717) + ,(#95718,#95719) + ,(#95720,#95721) + ,(#95722,#95723) + ,(#95724,#95725) + ,(#95726,#95727) + ,(#95728,#95729) + ,(#95730,#95731) + ,(#95732,#95733) + ,(#95734,#95735) + ,(#95736,#95737) + ,(#95738,#95739) + ,(#95740,#95741) + ,(#95742,#95743 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.807022544602E-02,0.133430431124,0.196150441495, + 0.257127947319,0.316867312535,0.3761731907,0.435947660585, + 0.496523923289,0.557455399094,0.617678272287,0.67793640363, + 0.738799415387,0.800944863813,0.864811629662,0.931023231107,1.),(0., + 1.),.UNSPECIFIED.); +#95706 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,6.E-02)); +#95707 = CARTESIAN_POINT('',(0.565410065612,-0.287288401386,5.E-02)); +#95708 = CARTESIAN_POINT('',(0.565209148654,-0.277844238657,6.E-02)); +#95709 = CARTESIAN_POINT('',(0.565209148654,-0.277844238657,5.E-02)); +#95710 = CARTESIAN_POINT('',(0.564815313669,-0.259331905309,6.E-02)); +#95711 = CARTESIAN_POINT('',(0.564815313669,-0.259331905309,5.E-02)); +#95712 = CARTESIAN_POINT('',(0.561183126496,-0.232321018061,6.E-02)); +#95713 = CARTESIAN_POINT('',(0.561183126496,-0.232321018061,5.E-02)); +#95714 = CARTESIAN_POINT('',(0.555456825467,-0.206693842473,6.E-02)); +#95715 = CARTESIAN_POINT('',(0.555456825467,-0.206693842473,5.E-02)); +#95716 = CARTESIAN_POINT('',(0.547165726226,-0.182597767781,6.E-02)); +#95717 = CARTESIAN_POINT('',(0.547165726226,-0.182597767781,5.E-02)); +#95718 = CARTESIAN_POINT('',(0.536846100542,-0.159807689544,6.E-02)); +#95719 = CARTESIAN_POINT('',(0.536846100542,-0.159807689544,5.E-02)); +#95720 = CARTESIAN_POINT('',(0.523792662075,-0.138655204787,6.E-02)); +#95721 = CARTESIAN_POINT('',(0.523792662075,-0.138655204787,5.E-02)); +#95722 = CARTESIAN_POINT('',(0.508625052549,-0.118836424073,6.E-02)); +#95723 = CARTESIAN_POINT('',(0.508625052549,-0.118836424073,5.E-02)); +#95724 = CARTESIAN_POINT('',(0.491170576473,-0.100667149091,6.E-02)); +#95725 = CARTESIAN_POINT('',(0.491170576473,-0.100667149091,5.E-02)); +#95726 = CARTESIAN_POINT('',(0.471871932529,-8.440396103474E-02,6.E-02) + ); +#95727 = CARTESIAN_POINT('',(0.471871932529,-8.440396103474E-02,5.E-02) + ); +#95728 = CARTESIAN_POINT('',(0.451234267029,-6.99406626739E-02,6.E-02)); +#95729 = CARTESIAN_POINT('',(0.451234267029,-6.99406626739E-02,5.E-02)); +#95730 = CARTESIAN_POINT('',(0.429081744583,-5.792347100819E-02,6.E-02) + ); +#95731 = CARTESIAN_POINT('',(0.429081744583,-5.792347100819E-02,5.E-02) + ); +#95732 = CARTESIAN_POINT('',(0.405603172368,-4.810488503672E-02,6.E-02) + ); +#95733 = CARTESIAN_POINT('',(0.405603172368,-4.810488503672E-02,5.E-02) + ); +#95734 = CARTESIAN_POINT('',(0.380839721541,-4.030950634431E-02,6.E-02) + ); +#95735 = CARTESIAN_POINT('',(0.380839721541,-4.030950634431E-02,5.E-02) + ); +#95736 = CARTESIAN_POINT('',(0.354684041292,-3.500201771844E-02,6.E-02) + ); +#95737 = CARTESIAN_POINT('',(0.354684041292,-3.500201771844E-02,5.E-02) + ); +#95738 = CARTESIAN_POINT('',(0.327255011408,-3.151280824727E-02,6.E-02) + ); +#95739 = CARTESIAN_POINT('',(0.327255011408,-3.151280824727E-02,5.E-02) + ); +#95740 = CARTESIAN_POINT('',(0.308497954616,-3.117344430644E-02,6.E-02) + ); +#95741 = CARTESIAN_POINT('',(0.308497954616,-3.117344430644E-02,5.E-02) + ); +#95742 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,6.E-02)); +#95743 = CARTESIAN_POINT('',(0.2989275961,-3.100029163022E-02,5.E-02)); +#95744 = ADVANCED_FACE('',(#95745,#95819),#95826,.T.); +#95745 = FACE_BOUND('',#95746,.T.); +#95746 = EDGE_LOOP('',(#95747,#95773,#95797,#95805,#95813)); +#95747 = ORIENTED_EDGE('',*,*,#95748,.F.); +#95748 = EDGE_CURVE('',#95749,#95751,#95753,.T.); +#95749 = VERTEX_POINT('',#95750); +#95750 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#95751 = VERTEX_POINT('',#95752); +#95752 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95753 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95754,#95755,#95756,#95757, + #95758,#95759,#95760,#95761,#95762,#95763,#95764,#95765,#95766, + #95767,#95768,#95769,#95770,#95771,#95772),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.429704972735E-02, + 0.144380499559,0.210480382945,0.27322424923,0.333782884733, + 0.392326248648,0.449878804646,0.507606719485,0.565245786658, + 0.623182940078,0.681326130709,0.740937022969,0.801873743509, + 0.865253473691,0.93094792748,1.),.UNSPECIFIED.); +#95754 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#95755 = CARTESIAN_POINT('',(0.498173374066,-0.293519842715,6.E-02)); +#95756 = CARTESIAN_POINT('',(0.497855606174,-0.308406504797,6.E-02)); +#95757 = CARTESIAN_POINT('',(0.495372443598,-0.329995440492,6.E-02)); +#95758 = CARTESIAN_POINT('',(0.491243205202,-0.350114720447,6.E-02)); +#95759 = CARTESIAN_POINT('',(0.485282397866,-0.368745112076,6.E-02)); +#95760 = CARTESIAN_POINT('',(0.477791410633,-0.385967086827,6.E-02)); +#95761 = CARTESIAN_POINT('',(0.468610340019,-0.401749205623,6.E-02)); +#95762 = CARTESIAN_POINT('',(0.457641233263,-0.415982746039,6.E-02)); +#95763 = CARTESIAN_POINT('',(0.445023665661,-0.428637028349,6.E-02)); +#95764 = CARTESIAN_POINT('',(0.431031165268,-0.439797028226,6.E-02)); +#95765 = CARTESIAN_POINT('',(0.415962004515,-0.449527572131,6.E-02)); +#95766 = CARTESIAN_POINT('',(0.399806777636,-0.457781800867,6.E-02)); +#95767 = CARTESIAN_POINT('',(0.382637791775,-0.464531387917,6.E-02)); +#95768 = CARTESIAN_POINT('',(0.364395404037,-0.469804299177,6.E-02)); +#95769 = CARTESIAN_POINT('',(0.345129421287,-0.473462638754,6.E-02)); +#95770 = CARTESIAN_POINT('',(0.324799333332,-0.475689902172,6.E-02)); +#95771 = CARTESIAN_POINT('',(0.310906234026,-0.475975754994,6.E-02)); +#95772 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95773 = ORIENTED_EDGE('',*,*,#95774,.F.); +#95774 = EDGE_CURVE('',#95775,#95749,#95777,.T.); +#95775 = VERTEX_POINT('',#95776); +#95776 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,6.E-02)); +#95777 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95778,#95779,#95780,#95781, + #95782,#95783,#95784,#95785,#95786,#95787,#95788,#95789,#95790, + #95791,#95792,#95793,#95794,#95795,#95796),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.082642719843E-02, + 0.138168749717,0.202474915996,0.263973212663,0.323654488881, + 0.381810801969,0.439403135578,0.497337440545,0.555096767069, + 0.613004897476,0.671539510489,0.731656272811,0.794298233775, + 0.859482493363,0.927681473872,1.),.UNSPECIFIED.); +#95778 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,6.E-02)); +#95779 = CARTESIAN_POINT('',(0.308557479973,-8.604105710262E-02,6.E-02) + ); +#95780 = CARTESIAN_POINT('',(0.323254568355,-8.635848610151E-02,6.E-02) + ); +#95781 = CARTESIAN_POINT('',(0.344671974059,-8.888329798478E-02,6.E-02) + ); +#95782 = CARTESIAN_POINT('',(0.364833499357,-9.292782162578E-02,6.E-02) + ); +#95783 = CARTESIAN_POINT('',(0.383751943845,-9.863527390313E-02,6.E-02) + ); +#95784 = CARTESIAN_POINT('',(0.401352512701,-0.106078551666,6.E-02)); +#95785 = CARTESIAN_POINT('',(0.41767240595,-0.115192339717,6.E-02)); +#95786 = CARTESIAN_POINT('',(0.432755938245,-0.125921518838,6.E-02)); +#95787 = CARTESIAN_POINT('',(0.446453344204,-0.138310173168,6.E-02)); +#95788 = CARTESIAN_POINT('',(0.458707405115,-0.152171899967,6.E-02)); +#95789 = CARTESIAN_POINT('',(0.469312849401,-0.16740938195,6.E-02)); +#95790 = CARTESIAN_POINT('',(0.478330899055,-0.183919291056,6.E-02)); +#95791 = CARTESIAN_POINT('',(0.485695292763,-0.201778052528,6.E-02)); +#95792 = CARTESIAN_POINT('',(0.491360926478,-0.220977634946,6.E-02)); +#95793 = CARTESIAN_POINT('',(0.495459754459,-0.24144318109,6.E-02)); +#95794 = CARTESIAN_POINT('',(0.497829190026,-0.263223515653,6.E-02)); +#95795 = CARTESIAN_POINT('',(0.498164384303,-0.27816798677,6.E-02)); +#95796 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#95797 = ORIENTED_EDGE('',*,*,#95798,.F.); +#95798 = EDGE_CURVE('',#95799,#95775,#95801,.T.); +#95799 = VERTEX_POINT('',#95800); +#95800 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02, + 5.999999999999E-02)); +#95801 = LINE('',#95802,#95803); +#95802 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02,6.E-02)); +#95803 = VECTOR('',#95804,1.); +#95804 = DIRECTION('',(1.,0.,0.)); +#95805 = ORIENTED_EDGE('',*,*,#95806,.F.); +#95806 = EDGE_CURVE('',#95807,#95799,#95809,.T.); +#95807 = VERTEX_POINT('',#95808); +#95808 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,6.E-02)); +#95809 = LINE('',#95810,#95811); +#95810 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,6.E-02)); +#95811 = VECTOR('',#95812,1.); +#95812 = DIRECTION('',(0.,1.,0.)); +#95813 = ORIENTED_EDGE('',*,*,#95814,.F.); +#95814 = EDGE_CURVE('',#95751,#95807,#95815,.T.); +#95815 = LINE('',#95816,#95817); +#95816 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95817 = VECTOR('',#95818,1.); +#95818 = DIRECTION('',(-1.,0.,0.)); +#95819 = FACE_BOUND('',#95820,.T.); +#95820 = EDGE_LOOP('',(#95821,#95822,#95823,#95824,#95825)); +#95821 = ORIENTED_EDGE('',*,*,#95537,.F.); +#95822 = ORIENTED_EDGE('',*,*,#95683,.F.); +#95823 = ORIENTED_EDGE('',*,*,#95609,.F.); +#95824 = ORIENTED_EDGE('',*,*,#95585,.F.); +#95825 = ORIENTED_EDGE('',*,*,#95561,.F.); +#95826 = PLANE('',#95827); +#95827 = AXIS2_PLACEMENT_3D('',#95828,#95829,#95830); +#95828 = CARTESIAN_POINT('',(0.48940402349,-0.466207652914,6.E-02)); +#95829 = DIRECTION('',(1.096102619532E-15,-1.60765316033E-14,-1.)); +#95830 = DIRECTION('',(1.038559827072E-45,1.,-1.60765316033E-14)); +#95831 = ADVANCED_FACE('',(#95832),#95857,.T.); +#95832 = FACE_BOUND('',#95833,.T.); +#95833 = EDGE_LOOP('',(#95834,#95844,#95850,#95851)); +#95834 = ORIENTED_EDGE('',*,*,#95835,.F.); +#95835 = EDGE_CURVE('',#95836,#95838,#95840,.T.); +#95836 = VERTEX_POINT('',#95837); +#95837 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,5.E-02)); +#95838 = VERTEX_POINT('',#95839); +#95839 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,5.E-02)); +#95840 = LINE('',#95841,#95842); +#95841 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,5.E-02)); +#95842 = VECTOR('',#95843,1.); +#95843 = DIRECTION('',(-1.,0.,0.)); +#95844 = ORIENTED_EDGE('',*,*,#95845,.F.); +#95845 = EDGE_CURVE('',#95751,#95836,#95846,.T.); +#95846 = LINE('',#95847,#95848); +#95847 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95848 = VECTOR('',#95849,1.); +#95849 = DIRECTION('',(-0.,-0.,-1.)); +#95850 = ORIENTED_EDGE('',*,*,#95814,.T.); +#95851 = ORIENTED_EDGE('',*,*,#95852,.T.); +#95852 = EDGE_CURVE('',#95807,#95838,#95853,.T.); +#95853 = LINE('',#95854,#95855); +#95854 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,6.E-02)); +#95855 = VECTOR('',#95856,1.); +#95856 = DIRECTION('',(-0.,-0.,-1.)); +#95857 = PLANE('',#95858); +#95858 = AXIS2_PLACEMENT_3D('',#95859,#95860,#95861); +#95859 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95860 = DIRECTION('',(0.,-1.,0.)); +#95861 = DIRECTION('',(0.,-0.,-1.)); +#95862 = ADVANCED_FACE('',(#95863),#95897,.T.); +#95863 = FACE_BOUND('',#95864,.T.); +#95864 = EDGE_LOOP('',(#95865,#95889,#95895,#95896)); +#95865 = ORIENTED_EDGE('',*,*,#95866,.F.); +#95866 = EDGE_CURVE('',#95867,#95836,#95869,.T.); +#95867 = VERTEX_POINT('',#95868); +#95868 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,5.E-02)); +#95869 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95870,#95871,#95872,#95873, + #95874,#95875,#95876,#95877,#95878,#95879,#95880,#95881,#95882, + #95883,#95884,#95885,#95886,#95887,#95888),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.429704972735E-02, + 0.144380499559,0.210480382945,0.27322424923,0.333782884733, + 0.392326248648,0.449878804646,0.507606719485,0.565245786658, + 0.623182940078,0.681326130709,0.740937022969,0.801873743509, + 0.865253473691,0.93094792748,1.),.UNSPECIFIED.); +#95870 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,5.E-02)); +#95871 = CARTESIAN_POINT('',(0.498173374066,-0.293519842715,5.E-02)); +#95872 = CARTESIAN_POINT('',(0.497855606174,-0.308406504797,5.E-02)); +#95873 = CARTESIAN_POINT('',(0.495372443598,-0.329995440492,5.E-02)); +#95874 = CARTESIAN_POINT('',(0.491243205202,-0.350114720447,5.E-02)); +#95875 = CARTESIAN_POINT('',(0.485282397866,-0.368745112076,5.E-02)); +#95876 = CARTESIAN_POINT('',(0.477791410633,-0.385967086827,5.E-02)); +#95877 = CARTESIAN_POINT('',(0.468610340019,-0.401749205623,5.E-02)); +#95878 = CARTESIAN_POINT('',(0.457641233263,-0.415982746039,5.E-02)); +#95879 = CARTESIAN_POINT('',(0.445023665661,-0.428637028349,5.E-02)); +#95880 = CARTESIAN_POINT('',(0.431031165268,-0.439797028226,5.E-02)); +#95881 = CARTESIAN_POINT('',(0.415962004515,-0.449527572131,5.E-02)); +#95882 = CARTESIAN_POINT('',(0.399806777636,-0.457781800867,5.E-02)); +#95883 = CARTESIAN_POINT('',(0.382637791775,-0.464531387917,5.E-02)); +#95884 = CARTESIAN_POINT('',(0.364395404037,-0.469804299177,5.E-02)); +#95885 = CARTESIAN_POINT('',(0.345129421287,-0.473462638754,5.E-02)); +#95886 = CARTESIAN_POINT('',(0.324799333332,-0.475689902172,5.E-02)); +#95887 = CARTESIAN_POINT('',(0.310906234026,-0.475975754994,5.E-02)); +#95888 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,5.E-02)); +#95889 = ORIENTED_EDGE('',*,*,#95890,.F.); +#95890 = EDGE_CURVE('',#95749,#95867,#95891,.T.); +#95891 = LINE('',#95892,#95893); +#95892 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#95893 = VECTOR('',#95894,1.); +#95894 = DIRECTION('',(-0.,-0.,-1.)); +#95895 = ORIENTED_EDGE('',*,*,#95748,.T.); +#95896 = ORIENTED_EDGE('',*,*,#95845,.T.); +#95897 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95898,#95899) + ,(#95900,#95901) + ,(#95902,#95903) + ,(#95904,#95905) + ,(#95906,#95907) + ,(#95908,#95909) + ,(#95910,#95911) + ,(#95912,#95913) + ,(#95914,#95915) + ,(#95916,#95917) + ,(#95918,#95919) + ,(#95920,#95921) + ,(#95922,#95923) + ,(#95924,#95925) + ,(#95926,#95927) + ,(#95928,#95929) + ,(#95930,#95931) + ,(#95932,#95933) + ,(#95934,#95935 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.429704972735E-02,0.144380499559,0.210480382945, + 0.27322424923,0.333782884733,0.392326248648,0.449878804646, + 0.507606719485,0.565245786658,0.623182940078,0.681326130709, + 0.740937022969,0.801873743509,0.865253473691,0.93094792748,1.),(0., + 1.),.UNSPECIFIED.); +#95898 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#95899 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,5.E-02)); +#95900 = CARTESIAN_POINT('',(0.498173374066,-0.293519842715,6.E-02)); +#95901 = CARTESIAN_POINT('',(0.498173374066,-0.293519842715,5.E-02)); +#95902 = CARTESIAN_POINT('',(0.497855606174,-0.308406504797,6.E-02)); +#95903 = CARTESIAN_POINT('',(0.497855606174,-0.308406504797,5.E-02)); +#95904 = CARTESIAN_POINT('',(0.495372443598,-0.329995440492,6.E-02)); +#95905 = CARTESIAN_POINT('',(0.495372443598,-0.329995440492,5.E-02)); +#95906 = CARTESIAN_POINT('',(0.491243205202,-0.350114720447,6.E-02)); +#95907 = CARTESIAN_POINT('',(0.491243205202,-0.350114720447,5.E-02)); +#95908 = CARTESIAN_POINT('',(0.485282397866,-0.368745112076,6.E-02)); +#95909 = CARTESIAN_POINT('',(0.485282397866,-0.368745112076,5.E-02)); +#95910 = CARTESIAN_POINT('',(0.477791410633,-0.385967086827,6.E-02)); +#95911 = CARTESIAN_POINT('',(0.477791410633,-0.385967086827,5.E-02)); +#95912 = CARTESIAN_POINT('',(0.468610340019,-0.401749205623,6.E-02)); +#95913 = CARTESIAN_POINT('',(0.468610340019,-0.401749205623,5.E-02)); +#95914 = CARTESIAN_POINT('',(0.457641233263,-0.415982746039,6.E-02)); +#95915 = CARTESIAN_POINT('',(0.457641233263,-0.415982746039,5.E-02)); +#95916 = CARTESIAN_POINT('',(0.445023665661,-0.428637028349,6.E-02)); +#95917 = CARTESIAN_POINT('',(0.445023665661,-0.428637028349,5.E-02)); +#95918 = CARTESIAN_POINT('',(0.431031165268,-0.439797028226,6.E-02)); +#95919 = CARTESIAN_POINT('',(0.431031165268,-0.439797028226,5.E-02)); +#95920 = CARTESIAN_POINT('',(0.415962004515,-0.449527572131,6.E-02)); +#95921 = CARTESIAN_POINT('',(0.415962004515,-0.449527572131,5.E-02)); +#95922 = CARTESIAN_POINT('',(0.399806777636,-0.457781800867,6.E-02)); +#95923 = CARTESIAN_POINT('',(0.399806777636,-0.457781800867,5.E-02)); +#95924 = CARTESIAN_POINT('',(0.382637791775,-0.464531387917,6.E-02)); +#95925 = CARTESIAN_POINT('',(0.382637791775,-0.464531387917,5.E-02)); +#95926 = CARTESIAN_POINT('',(0.364395404037,-0.469804299177,6.E-02)); +#95927 = CARTESIAN_POINT('',(0.364395404037,-0.469804299177,5.E-02)); +#95928 = CARTESIAN_POINT('',(0.345129421287,-0.473462638754,6.E-02)); +#95929 = CARTESIAN_POINT('',(0.345129421287,-0.473462638754,5.E-02)); +#95930 = CARTESIAN_POINT('',(0.324799333332,-0.475689902172,6.E-02)); +#95931 = CARTESIAN_POINT('',(0.324799333332,-0.475689902172,5.E-02)); +#95932 = CARTESIAN_POINT('',(0.310906234026,-0.475975754994,6.E-02)); +#95933 = CARTESIAN_POINT('',(0.310906234026,-0.475975754994,5.E-02)); +#95934 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,6.E-02)); +#95935 = CARTESIAN_POINT('',(0.303786590002,-0.47612224285,5.E-02)); +#95936 = ADVANCED_FACE('',(#95937),#95971,.T.); +#95937 = FACE_BOUND('',#95938,.T.); +#95938 = EDGE_LOOP('',(#95939,#95963,#95969,#95970)); +#95939 = ORIENTED_EDGE('',*,*,#95940,.F.); +#95940 = EDGE_CURVE('',#95941,#95867,#95943,.T.); +#95941 = VERTEX_POINT('',#95942); +#95942 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,5.E-02)); +#95943 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#95944,#95945,#95946,#95947, + #95948,#95949,#95950,#95951,#95952,#95953,#95954,#95955,#95956, + #95957,#95958,#95959,#95960,#95961,#95962),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.082642719843E-02, + 0.138168749717,0.202474915996,0.263973212663,0.323654488881, + 0.381810801969,0.439403135578,0.497337440545,0.555096767069, + 0.613004897476,0.671539510489,0.731656272811,0.794298233775, + 0.859482493363,0.927681473872,1.),.UNSPECIFIED.); +#95944 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,5.E-02)); +#95945 = CARTESIAN_POINT('',(0.308557479973,-8.604105710262E-02,5.E-02) + ); +#95946 = CARTESIAN_POINT('',(0.323254568355,-8.635848610151E-02,5.E-02) + ); +#95947 = CARTESIAN_POINT('',(0.344671974059,-8.888329798478E-02,5.E-02) + ); +#95948 = CARTESIAN_POINT('',(0.364833499357,-9.292782162578E-02,5.E-02) + ); +#95949 = CARTESIAN_POINT('',(0.383751943845,-9.863527390313E-02,5.E-02) + ); +#95950 = CARTESIAN_POINT('',(0.401352512701,-0.106078551666,5.E-02)); +#95951 = CARTESIAN_POINT('',(0.41767240595,-0.115192339717,5.E-02)); +#95952 = CARTESIAN_POINT('',(0.432755938245,-0.125921518838,5.E-02)); +#95953 = CARTESIAN_POINT('',(0.446453344204,-0.138310173168,5.E-02)); +#95954 = CARTESIAN_POINT('',(0.458707405115,-0.152171899967,5.E-02)); +#95955 = CARTESIAN_POINT('',(0.469312849401,-0.16740938195,5.E-02)); +#95956 = CARTESIAN_POINT('',(0.478330899055,-0.183919291056,5.E-02)); +#95957 = CARTESIAN_POINT('',(0.485695292763,-0.201778052528,5.E-02)); +#95958 = CARTESIAN_POINT('',(0.491360926478,-0.220977634946,5.E-02)); +#95959 = CARTESIAN_POINT('',(0.495459754459,-0.24144318109,5.E-02)); +#95960 = CARTESIAN_POINT('',(0.497829190026,-0.263223515653,5.E-02)); +#95961 = CARTESIAN_POINT('',(0.498164384303,-0.27816798677,5.E-02)); +#95962 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,5.E-02)); +#95963 = ORIENTED_EDGE('',*,*,#95964,.F.); +#95964 = EDGE_CURVE('',#95775,#95941,#95965,.T.); +#95965 = LINE('',#95966,#95967); +#95966 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,6.E-02)); +#95967 = VECTOR('',#95968,1.); +#95968 = DIRECTION('',(-0.,-0.,-1.)); +#95969 = ORIENTED_EDGE('',*,*,#95774,.T.); +#95970 = ORIENTED_EDGE('',*,*,#95890,.T.); +#95971 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#95972,#95973) + ,(#95974,#95975) + ,(#95976,#95977) + ,(#95978,#95979) + ,(#95980,#95981) + ,(#95982,#95983) + ,(#95984,#95985) + ,(#95986,#95987) + ,(#95988,#95989) + ,(#95990,#95991) + ,(#95992,#95993) + ,(#95994,#95995) + ,(#95996,#95997) + ,(#95998,#95999) + ,(#96000,#96001) + ,(#96002,#96003) + ,(#96004,#96005) + ,(#96006,#96007) + ,(#96008,#96009 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.082642719843E-02,0.138168749717,0.202474915996, + 0.263973212663,0.323654488881,0.381810801969,0.439403135578, + 0.497337440545,0.555096767069,0.613004897476,0.671539510489, + 0.731656272811,0.794298233775,0.859482493363,0.927681473872,1.),(0., + 1.),.UNSPECIFIED.); +#95972 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,6.E-02)); +#95973 = CARTESIAN_POINT('',(0.301023632685,-8.58783404107E-02,5.E-02)); +#95974 = CARTESIAN_POINT('',(0.308557479973,-8.604105710262E-02,6.E-02) + ); +#95975 = CARTESIAN_POINT('',(0.308557479973,-8.604105710262E-02,5.E-02) + ); +#95976 = CARTESIAN_POINT('',(0.323254568355,-8.635848610151E-02,6.E-02) + ); +#95977 = CARTESIAN_POINT('',(0.323254568355,-8.635848610151E-02,5.E-02) + ); +#95978 = CARTESIAN_POINT('',(0.344671974059,-8.888329798478E-02,6.E-02) + ); +#95979 = CARTESIAN_POINT('',(0.344671974059,-8.888329798478E-02,5.E-02) + ); +#95980 = CARTESIAN_POINT('',(0.364833499357,-9.292782162578E-02,6.E-02) + ); +#95981 = CARTESIAN_POINT('',(0.364833499357,-9.292782162578E-02,5.E-02) + ); +#95982 = CARTESIAN_POINT('',(0.383751943845,-9.863527390313E-02,6.E-02) + ); +#95983 = CARTESIAN_POINT('',(0.383751943845,-9.863527390313E-02,5.E-02) + ); +#95984 = CARTESIAN_POINT('',(0.401352512701,-0.106078551666,6.E-02)); +#95985 = CARTESIAN_POINT('',(0.401352512701,-0.106078551666,5.E-02)); +#95986 = CARTESIAN_POINT('',(0.41767240595,-0.115192339717,6.E-02)); +#95987 = CARTESIAN_POINT('',(0.41767240595,-0.115192339717,5.E-02)); +#95988 = CARTESIAN_POINT('',(0.432755938245,-0.125921518838,6.E-02)); +#95989 = CARTESIAN_POINT('',(0.432755938245,-0.125921518838,5.E-02)); +#95990 = CARTESIAN_POINT('',(0.446453344204,-0.138310173168,6.E-02)); +#95991 = CARTESIAN_POINT('',(0.446453344204,-0.138310173168,5.E-02)); +#95992 = CARTESIAN_POINT('',(0.458707405115,-0.152171899967,6.E-02)); +#95993 = CARTESIAN_POINT('',(0.458707405115,-0.152171899967,5.E-02)); +#95994 = CARTESIAN_POINT('',(0.469312849401,-0.16740938195,6.E-02)); +#95995 = CARTESIAN_POINT('',(0.469312849401,-0.16740938195,5.E-02)); +#95996 = CARTESIAN_POINT('',(0.478330899055,-0.183919291056,6.E-02)); +#95997 = CARTESIAN_POINT('',(0.478330899055,-0.183919291056,5.E-02)); +#95998 = CARTESIAN_POINT('',(0.485695292763,-0.201778052528,6.E-02)); +#95999 = CARTESIAN_POINT('',(0.485695292763,-0.201778052528,5.E-02)); +#96000 = CARTESIAN_POINT('',(0.491360926478,-0.220977634946,6.E-02)); +#96001 = CARTESIAN_POINT('',(0.491360926478,-0.220977634946,5.E-02)); +#96002 = CARTESIAN_POINT('',(0.495459754459,-0.24144318109,6.E-02)); +#96003 = CARTESIAN_POINT('',(0.495459754459,-0.24144318109,5.E-02)); +#96004 = CARTESIAN_POINT('',(0.497829190026,-0.263223515653,6.E-02)); +#96005 = CARTESIAN_POINT('',(0.497829190026,-0.263223515653,5.E-02)); +#96006 = CARTESIAN_POINT('',(0.498164384303,-0.27816798677,6.E-02)); +#96007 = CARTESIAN_POINT('',(0.498164384303,-0.27816798677,5.E-02)); +#96008 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,6.E-02)); +#96009 = CARTESIAN_POINT('',(0.49833689488,-0.285859285533,5.E-02)); +#96010 = ADVANCED_FACE('',(#96011),#96029,.T.); +#96011 = FACE_BOUND('',#96012,.T.); +#96012 = EDGE_LOOP('',(#96013,#96021,#96027,#96028)); +#96013 = ORIENTED_EDGE('',*,*,#96014,.F.); +#96014 = EDGE_CURVE('',#96015,#95941,#96017,.T.); +#96015 = VERTEX_POINT('',#96016); +#96016 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02,5.E-02)); +#96017 = LINE('',#96018,#96019); +#96018 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02,5.E-02)); +#96019 = VECTOR('',#96020,1.); +#96020 = DIRECTION('',(1.,0.,0.)); +#96021 = ORIENTED_EDGE('',*,*,#96022,.F.); +#96022 = EDGE_CURVE('',#95799,#96015,#96023,.T.); +#96023 = LINE('',#96024,#96025); +#96024 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02,6.E-02)); +#96025 = VECTOR('',#96026,1.); +#96026 = DIRECTION('',(-0.,-0.,-1.)); +#96027 = ORIENTED_EDGE('',*,*,#95798,.T.); +#96028 = ORIENTED_EDGE('',*,*,#95964,.T.); +#96029 = PLANE('',#96030); +#96030 = AXIS2_PLACEMENT_3D('',#96031,#96032,#96033); +#96031 = CARTESIAN_POINT('',(0.230044211953,-8.58783404107E-02,6.E-02)); +#96032 = DIRECTION('',(0.,1.,0.)); +#96033 = DIRECTION('',(0.,-0.,1.)); +#96034 = ADVANCED_FACE('',(#96035),#96046,.T.); +#96035 = FACE_BOUND('',#96036,.T.); +#96036 = EDGE_LOOP('',(#96037,#96043,#96044,#96045)); +#96037 = ORIENTED_EDGE('',*,*,#96038,.F.); +#96038 = EDGE_CURVE('',#95838,#96015,#96039,.T.); +#96039 = LINE('',#96040,#96041); +#96040 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,5.E-02)); +#96041 = VECTOR('',#96042,1.); +#96042 = DIRECTION('',(0.,1.,0.)); +#96043 = ORIENTED_EDGE('',*,*,#95852,.F.); +#96044 = ORIENTED_EDGE('',*,*,#95806,.T.); +#96045 = ORIENTED_EDGE('',*,*,#96022,.T.); +#96046 = PLANE('',#96047); +#96047 = AXIS2_PLACEMENT_3D('',#96048,#96049,#96050); +#96048 = CARTESIAN_POINT('',(0.230044211953,-0.47612224285,6.E-02)); +#96049 = DIRECTION('',(-1.,0.,0.)); +#96050 = DIRECTION('',(0.,0.,1.)); +#96051 = ADVANCED_FACE('',(#96052),#96077,.T.); +#96052 = FACE_BOUND('',#96053,.T.); +#96053 = EDGE_LOOP('',(#96054,#96055,#96063,#96071)); +#96054 = ORIENTED_EDGE('',*,*,#79907,.F.); +#96055 = ORIENTED_EDGE('',*,*,#96056,.F.); +#96056 = EDGE_CURVE('',#96057,#79900,#96059,.T.); +#96057 = VERTEX_POINT('',#96058); +#96058 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 6.E-02)); +#96059 = LINE('',#96060,#96061); +#96060 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 6.E-02)); +#96061 = VECTOR('',#96062,1.); +#96062 = DIRECTION('',(-0.,-0.,-1.)); +#96063 = ORIENTED_EDGE('',*,*,#96064,.T.); +#96064 = EDGE_CURVE('',#96057,#96065,#96067,.T.); +#96065 = VERTEX_POINT('',#96066); +#96066 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 6.E-02)); +#96067 = LINE('',#96068,#96069); +#96068 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 6.E-02)); +#96069 = VECTOR('',#96070,1.); +#96070 = DIRECTION('',(0.,1.,0.)); +#96071 = ORIENTED_EDGE('',*,*,#96072,.T.); +#96072 = EDGE_CURVE('',#96065,#79908,#96073,.T.); +#96073 = LINE('',#96074,#96075); +#96074 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 6.E-02)); +#96075 = VECTOR('',#96076,1.); +#96076 = DIRECTION('',(-0.,-0.,-1.)); +#96077 = PLANE('',#96078); +#96078 = AXIS2_PLACEMENT_3D('',#96079,#96080,#96081); +#96079 = CARTESIAN_POINT('',(6.541006561171E-02,-8.58783404107E-02, + 6.E-02)); +#96080 = DIRECTION('',(-1.,0.,0.)); +#96081 = DIRECTION('',(0.,0.,1.)); +#96082 = ADVANCED_FACE('',(#96083),#96101,.T.); +#96083 = FACE_BOUND('',#96084,.T.); +#96084 = EDGE_LOOP('',(#96085,#96086,#96087,#96095)); +#96085 = ORIENTED_EDGE('',*,*,#79915,.F.); +#96086 = ORIENTED_EDGE('',*,*,#96072,.F.); +#96087 = ORIENTED_EDGE('',*,*,#96088,.T.); +#96088 = EDGE_CURVE('',#96065,#96089,#96091,.T.); +#96089 = VERTEX_POINT('',#96090); +#96090 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,6.E-02) + ); +#96091 = LINE('',#96092,#96093); +#96092 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 6.E-02)); +#96093 = VECTOR('',#96094,1.); +#96094 = DIRECTION('',(-1.,0.,0.)); +#96095 = ORIENTED_EDGE('',*,*,#96096,.T.); +#96096 = EDGE_CURVE('',#96089,#79916,#96097,.T.); +#96097 = LINE('',#96098,#96099); +#96098 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,6.E-02) + ); +#96099 = VECTOR('',#96100,1.); +#96100 = DIRECTION('',(-0.,-0.,-1.)); +#96101 = PLANE('',#96102); +#96102 = AXIS2_PLACEMENT_3D('',#96103,#96104,#96105); +#96103 = CARTESIAN_POINT('',(6.541006561171E-02,-3.100029163022E-02, + 6.E-02)); +#96104 = DIRECTION('',(0.,-1.,0.)); +#96105 = DIRECTION('',(0.,-0.,-1.)); +#96106 = ADVANCED_FACE('',(#96107),#96125,.T.); +#96107 = FACE_BOUND('',#96108,.T.); +#96108 = EDGE_LOOP('',(#96109,#96110,#96111,#96119)); +#96109 = ORIENTED_EDGE('',*,*,#79923,.F.); +#96110 = ORIENTED_EDGE('',*,*,#96096,.F.); +#96111 = ORIENTED_EDGE('',*,*,#96112,.T.); +#96112 = EDGE_CURVE('',#96089,#96113,#96115,.T.); +#96113 = VERTEX_POINT('',#96114); +#96114 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,6.E-02)); +#96115 = LINE('',#96116,#96117); +#96116 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,6.E-02) + ); +#96117 = VECTOR('',#96118,1.); +#96118 = DIRECTION('',(0.,-1.,0.)); +#96119 = ORIENTED_EDGE('',*,*,#96120,.T.); +#96120 = EDGE_CURVE('',#96113,#79924,#96121,.T.); +#96121 = LINE('',#96122,#96123); +#96122 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,6.E-02)); +#96123 = VECTOR('',#96124,1.); +#96124 = DIRECTION('',(-0.,-0.,-1.)); +#96125 = PLANE('',#96126); +#96126 = AXIS2_PLACEMENT_3D('',#96127,#96128,#96129); +#96127 = CARTESIAN_POINT('',(-0.202882617315,-3.100029163022E-02,6.E-02) + ); +#96128 = DIRECTION('',(1.,0.,-0.)); +#96129 = DIRECTION('',(-0.,0.,-1.)); +#96130 = ADVANCED_FACE('',(#96131),#96149,.T.); +#96131 = FACE_BOUND('',#96132,.T.); +#96132 = EDGE_LOOP('',(#96133,#96134,#96135,#96143)); +#96133 = ORIENTED_EDGE('',*,*,#79931,.F.); +#96134 = ORIENTED_EDGE('',*,*,#96120,.F.); +#96135 = ORIENTED_EDGE('',*,*,#96136,.T.); +#96136 = EDGE_CURVE('',#96113,#96137,#96139,.T.); +#96137 = VERTEX_POINT('',#96138); +#96138 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,6.E-02)); +#96139 = LINE('',#96140,#96141); +#96140 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,6.E-02)); +#96141 = VECTOR('',#96142,1.); +#96142 = DIRECTION('',(1.,0.,0.)); +#96143 = ORIENTED_EDGE('',*,*,#96144,.T.); +#96144 = EDGE_CURVE('',#96137,#79932,#96145,.T.); +#96145 = LINE('',#96146,#96147); +#96146 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,6.E-02)); +#96147 = VECTOR('',#96148,1.); +#96148 = DIRECTION('',(-0.,-0.,-1.)); +#96149 = PLANE('',#96150); +#96150 = AXIS2_PLACEMENT_3D('',#96151,#96152,#96153); +#96151 = CARTESIAN_POINT('',(-0.202882617315,-0.53100029163,6.E-02)); +#96152 = DIRECTION('',(0.,1.,0.)); +#96153 = DIRECTION('',(0.,-0.,1.)); +#96154 = ADVANCED_FACE('',(#96155),#96173,.T.); +#96155 = FACE_BOUND('',#96156,.T.); +#96156 = EDGE_LOOP('',(#96157,#96158,#96159,#96167)); +#96157 = ORIENTED_EDGE('',*,*,#79939,.F.); +#96158 = ORIENTED_EDGE('',*,*,#96144,.F.); +#96159 = ORIENTED_EDGE('',*,*,#96160,.T.); +#96160 = EDGE_CURVE('',#96137,#96161,#96163,.T.); +#96161 = VERTEX_POINT('',#96162); +#96162 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,6.E-02)); +#96163 = LINE('',#96164,#96165); +#96164 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,6.E-02)); +#96165 = VECTOR('',#96166,1.); +#96166 = DIRECTION('',(0.,1.,0.)); +#96167 = ORIENTED_EDGE('',*,*,#96168,.T.); +#96168 = EDGE_CURVE('',#96161,#79940,#96169,.T.); +#96169 = LINE('',#96170,#96171); +#96170 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,6.E-02)); +#96171 = VECTOR('',#96172,1.); +#96172 = DIRECTION('',(-0.,-0.,-1.)); +#96173 = PLANE('',#96174); +#96174 = AXIS2_PLACEMENT_3D('',#96175,#96176,#96177); +#96175 = CARTESIAN_POINT('',(5.321494366049E-02,-0.53100029163,6.E-02)); +#96176 = DIRECTION('',(-1.,0.,0.)); +#96177 = DIRECTION('',(0.,0.,1.)); +#96178 = ADVANCED_FACE('',(#96179),#96197,.T.); +#96179 = FACE_BOUND('',#96180,.T.); +#96180 = EDGE_LOOP('',(#96181,#96182,#96183,#96191)); +#96181 = ORIENTED_EDGE('',*,*,#79947,.F.); +#96182 = ORIENTED_EDGE('',*,*,#96168,.F.); +#96183 = ORIENTED_EDGE('',*,*,#96184,.T.); +#96184 = EDGE_CURVE('',#96161,#96185,#96187,.T.); +#96185 = VERTEX_POINT('',#96186); +#96186 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,6.E-02)); +#96187 = LINE('',#96188,#96189); +#96188 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,6.E-02)); +#96189 = VECTOR('',#96190,1.); +#96190 = DIRECTION('',(-1.,0.,0.)); +#96191 = ORIENTED_EDGE('',*,*,#96192,.T.); +#96192 = EDGE_CURVE('',#96185,#79948,#96193,.T.); +#96193 = LINE('',#96194,#96195); +#96194 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,6.E-02)); +#96195 = VECTOR('',#96196,1.); +#96196 = DIRECTION('',(-0.,-0.,-1.)); +#96197 = PLANE('',#96198); +#96198 = AXIS2_PLACEMENT_3D('',#96199,#96200,#96201); +#96199 = CARTESIAN_POINT('',(5.321494366049E-02,-0.47612224285,6.E-02)); +#96200 = DIRECTION('',(0.,-1.,0.)); +#96201 = DIRECTION('',(0.,-0.,-1.)); +#96202 = ADVANCED_FACE('',(#96203),#96221,.T.); +#96203 = FACE_BOUND('',#96204,.T.); +#96204 = EDGE_LOOP('',(#96205,#96206,#96207,#96215)); +#96205 = ORIENTED_EDGE('',*,*,#79955,.F.); +#96206 = ORIENTED_EDGE('',*,*,#96192,.F.); +#96207 = ORIENTED_EDGE('',*,*,#96208,.T.); +#96208 = EDGE_CURVE('',#96185,#96209,#96211,.T.); +#96209 = VERTEX_POINT('',#96210); +#96210 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,6.E-02)); +#96211 = LINE('',#96212,#96213); +#96212 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,6.E-02)); +#96213 = VECTOR('',#96214,1.); +#96214 = DIRECTION('',(0.,1.,0.)); +#96215 = ORIENTED_EDGE('',*,*,#96216,.T.); +#96216 = EDGE_CURVE('',#96209,#79956,#96217,.T.); +#96217 = LINE('',#96218,#96219); +#96218 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,6.E-02)); +#96219 = VECTOR('',#96220,1.); +#96220 = DIRECTION('',(-0.,-0.,-1.)); +#96221 = PLANE('',#96222); +#96222 = AXIS2_PLACEMENT_3D('',#96223,#96224,#96225); +#96223 = CARTESIAN_POINT('',(-0.135809446583,-0.47612224285,6.E-02)); +#96224 = DIRECTION('',(-1.,0.,0.)); +#96225 = DIRECTION('',(0.,0.,1.)); +#96226 = ADVANCED_FACE('',(#96227),#96245,.T.); +#96227 = FACE_BOUND('',#96228,.T.); +#96228 = EDGE_LOOP('',(#96229,#96230,#96231,#96239)); +#96229 = ORIENTED_EDGE('',*,*,#79963,.F.); +#96230 = ORIENTED_EDGE('',*,*,#96216,.F.); +#96231 = ORIENTED_EDGE('',*,*,#96232,.T.); +#96232 = EDGE_CURVE('',#96209,#96233,#96235,.T.); +#96233 = VERTEX_POINT('',#96234); +#96234 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,6.E-02) + ); +#96235 = LINE('',#96236,#96237); +#96236 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,6.E-02)); +#96237 = VECTOR('',#96238,1.); +#96238 = DIRECTION('',(1.,0.,0.)); +#96239 = ORIENTED_EDGE('',*,*,#96240,.T.); +#96240 = EDGE_CURVE('',#96233,#79964,#96241,.T.); +#96241 = LINE('',#96242,#96243); +#96242 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,6.E-02) + ); +#96243 = VECTOR('',#96244,1.); +#96244 = DIRECTION('',(-0.,-0.,-1.)); +#96245 = PLANE('',#96246); +#96246 = AXIS2_PLACEMENT_3D('',#96247,#96248,#96249); +#96247 = CARTESIAN_POINT('',(-0.135809446583,-0.311488096508,6.E-02)); +#96248 = DIRECTION('',(0.,1.,0.)); +#96249 = DIRECTION('',(0.,-0.,1.)); +#96250 = ADVANCED_FACE('',(#96251),#96269,.T.); +#96251 = FACE_BOUND('',#96252,.T.); +#96252 = EDGE_LOOP('',(#96253,#96254,#96255,#96263)); +#96253 = ORIENTED_EDGE('',*,*,#79971,.F.); +#96254 = ORIENTED_EDGE('',*,*,#96240,.F.); +#96255 = ORIENTED_EDGE('',*,*,#96256,.T.); +#96256 = EDGE_CURVE('',#96233,#96257,#96259,.T.); +#96257 = VERTEX_POINT('',#96258); +#96258 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,6.E-02) + ); +#96259 = LINE('',#96260,#96261); +#96260 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,6.E-02) + ); +#96261 = VECTOR('',#96262,1.); +#96262 = DIRECTION('',(0.,1.,0.)); +#96263 = ORIENTED_EDGE('',*,*,#96264,.T.); +#96264 = EDGE_CURVE('',#96257,#79972,#96265,.T.); +#96265 = LINE('',#96266,#96267); +#96266 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,6.E-02) + ); +#96267 = VECTOR('',#96268,1.); +#96268 = DIRECTION('',(-0.,-0.,-1.)); +#96269 = PLANE('',#96270); +#96270 = AXIS2_PLACEMENT_3D('',#96271,#96272,#96273); +#96271 = CARTESIAN_POINT('',(4.101982170927E-02,-0.311488096508,6.E-02) + ); +#96272 = DIRECTION('',(-1.,0.,0.)); +#96273 = DIRECTION('',(0.,0.,1.)); +#96274 = ADVANCED_FACE('',(#96275),#96293,.T.); +#96275 = FACE_BOUND('',#96276,.T.); +#96276 = EDGE_LOOP('',(#96277,#96278,#96279,#96287)); +#96277 = ORIENTED_EDGE('',*,*,#79979,.F.); +#96278 = ORIENTED_EDGE('',*,*,#96264,.F.); +#96279 = ORIENTED_EDGE('',*,*,#96280,.T.); +#96280 = EDGE_CURVE('',#96257,#96281,#96283,.T.); +#96281 = VERTEX_POINT('',#96282); +#96282 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,6.E-02)); +#96283 = LINE('',#96284,#96285); +#96284 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,6.E-02) + ); +#96285 = VECTOR('',#96286,1.); +#96286 = DIRECTION('',(-1.,0.,0.)); +#96287 = ORIENTED_EDGE('',*,*,#96288,.T.); +#96288 = EDGE_CURVE('',#96281,#79980,#96289,.T.); +#96289 = LINE('',#96290,#96291); +#96290 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,6.E-02)); +#96291 = VECTOR('',#96292,1.); +#96292 = DIRECTION('',(-0.,-0.,-1.)); +#96293 = PLANE('',#96294); +#96294 = AXIS2_PLACEMENT_3D('',#96295,#96296,#96297); +#96295 = CARTESIAN_POINT('',(4.101982170927E-02,-0.256610047728,6.E-02) + ); +#96296 = DIRECTION('',(0.,-1.,0.)); +#96297 = DIRECTION('',(0.,-0.,-1.)); +#96298 = ADVANCED_FACE('',(#96299),#96317,.T.); +#96299 = FACE_BOUND('',#96300,.T.); +#96300 = EDGE_LOOP('',(#96301,#96302,#96303,#96311)); +#96301 = ORIENTED_EDGE('',*,*,#79987,.F.); +#96302 = ORIENTED_EDGE('',*,*,#96288,.F.); +#96303 = ORIENTED_EDGE('',*,*,#96304,.T.); +#96304 = EDGE_CURVE('',#96281,#96305,#96307,.T.); +#96305 = VERTEX_POINT('',#96306); +#96306 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,6.E-02) + ); +#96307 = LINE('',#96308,#96309); +#96308 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,6.E-02)); +#96309 = VECTOR('',#96310,1.); +#96310 = DIRECTION('',(0.,1.,0.)); +#96311 = ORIENTED_EDGE('',*,*,#96312,.T.); +#96312 = EDGE_CURVE('',#96305,#79898,#96313,.T.); +#96313 = LINE('',#96314,#96315); +#96314 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,6.E-02) + ); +#96315 = VECTOR('',#96316,1.); +#96316 = DIRECTION('',(-0.,-0.,-1.)); +#96317 = PLANE('',#96318); +#96318 = AXIS2_PLACEMENT_3D('',#96319,#96320,#96321); +#96319 = CARTESIAN_POINT('',(-0.135809446583,-0.256610047728,6.E-02)); +#96320 = DIRECTION('',(-1.,0.,0.)); +#96321 = DIRECTION('',(0.,0.,1.)); +#96322 = ADVANCED_FACE('',(#96323),#96334,.T.); +#96323 = FACE_BOUND('',#96324,.T.); +#96324 = EDGE_LOOP('',(#96325,#96326,#96327,#96333)); +#96325 = ORIENTED_EDGE('',*,*,#79897,.F.); +#96326 = ORIENTED_EDGE('',*,*,#96312,.F.); +#96327 = ORIENTED_EDGE('',*,*,#96328,.T.); +#96328 = EDGE_CURVE('',#96305,#96057,#96329,.T.); +#96329 = LINE('',#96330,#96331); +#96330 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,6.E-02) + ); +#96331 = VECTOR('',#96332,1.); +#96332 = DIRECTION('',(1.,0.,0.)); +#96333 = ORIENTED_EDGE('',*,*,#96056,.T.); +#96334 = PLANE('',#96335); +#96335 = AXIS2_PLACEMENT_3D('',#96336,#96337,#96338); +#96336 = CARTESIAN_POINT('',(-0.135809446583,-8.58783404107E-02,6.E-02) + ); +#96337 = DIRECTION('',(0.,1.,0.)); +#96338 = DIRECTION('',(0.,-0.,1.)); +#96339 = ADVANCED_FACE('',(#96340),#96354,.F.); +#96340 = FACE_BOUND('',#96341,.T.); +#96341 = EDGE_LOOP('',(#96342,#96343,#96344,#96345,#96346,#96347,#96348, + #96349,#96350,#96351,#96352,#96353)); +#96342 = ORIENTED_EDGE('',*,*,#96064,.F.); +#96343 = ORIENTED_EDGE('',*,*,#96328,.F.); +#96344 = ORIENTED_EDGE('',*,*,#96304,.F.); +#96345 = ORIENTED_EDGE('',*,*,#96280,.F.); +#96346 = ORIENTED_EDGE('',*,*,#96256,.F.); +#96347 = ORIENTED_EDGE('',*,*,#96232,.F.); +#96348 = ORIENTED_EDGE('',*,*,#96208,.F.); +#96349 = ORIENTED_EDGE('',*,*,#96184,.F.); +#96350 = ORIENTED_EDGE('',*,*,#96160,.F.); +#96351 = ORIENTED_EDGE('',*,*,#96136,.F.); +#96352 = ORIENTED_EDGE('',*,*,#96112,.F.); +#96353 = ORIENTED_EDGE('',*,*,#96088,.F.); +#96354 = PLANE('',#96355); +#96355 = AXIS2_PLACEMENT_3D('',#96356,#96357,#96358); +#96356 = CARTESIAN_POINT('',(0.,0.,6.E-02)); +#96357 = DIRECTION('',(0.,-0.,1.)); +#96358 = DIRECTION('',(1.,0.,0.)); +#96359 = ADVANCED_FACE('',(#96360),#96385,.T.); +#96360 = FACE_BOUND('',#96361,.T.); +#96361 = EDGE_LOOP('',(#96362,#96363,#96371,#96379)); +#96362 = ORIENTED_EDGE('',*,*,#80013,.F.); +#96363 = ORIENTED_EDGE('',*,*,#96364,.F.); +#96364 = EDGE_CURVE('',#96365,#79998,#96367,.T.); +#96365 = VERTEX_POINT('',#96366); +#96366 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96367 = LINE('',#96368,#96369); +#96368 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96369 = VECTOR('',#96370,1.); +#96370 = DIRECTION('',(-0.,-0.,-1.)); +#96371 = ORIENTED_EDGE('',*,*,#96372,.T.); +#96372 = EDGE_CURVE('',#96365,#96373,#96375,.T.); +#96373 = VERTEX_POINT('',#96374); +#96374 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,6.E-02) + ); +#96375 = LINE('',#96376,#96377); +#96376 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96377 = VECTOR('',#96378,1.); +#96378 = DIRECTION('',(0.,1.,0.)); +#96379 = ORIENTED_EDGE('',*,*,#96380,.T.); +#96380 = EDGE_CURVE('',#96373,#80014,#96381,.T.); +#96381 = LINE('',#96382,#96383); +#96382 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,6.E-02) + ); +#96383 = VECTOR('',#96384,1.); +#96384 = DIRECTION('',(-0.,-0.,-1.)); +#96385 = PLANE('',#96386); +#96386 = AXIS2_PLACEMENT_3D('',#96387,#96388,#96389); +#96387 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96388 = DIRECTION('',(-1.,0.,0.)); +#96389 = DIRECTION('',(0.,0.,1.)); +#96390 = ADVANCED_FACE('',(#96391),#96417,.T.); +#96391 = FACE_BOUND('',#96392,.T.); +#96392 = EDGE_LOOP('',(#96393,#96394,#96395,#96411)); +#96393 = ORIENTED_EDGE('',*,*,#80021,.F.); +#96394 = ORIENTED_EDGE('',*,*,#96380,.F.); +#96395 = ORIENTED_EDGE('',*,*,#96396,.T.); +#96396 = EDGE_CURVE('',#96373,#96397,#96399,.T.); +#96397 = VERTEX_POINT('',#96398); +#96398 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96399 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96400,#96401,#96402,#96403, + #96404,#96405,#96406,#96407,#96408,#96409,#96410),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.112448389909,0.226527675213, + 0.344401949326,0.465864972487,0.591659449352,0.722168487025, + 0.858606387555,1.),.UNSPECIFIED.); +#96400 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,6.E-02) + ); +#96401 = CARTESIAN_POINT('',(-0.305135288312,-5.432530094161E-02,6.E-02) + ); +#96402 = CARTESIAN_POINT('',(-0.314586725099,-4.910849264396E-02,6.E-02) + ); +#96403 = CARTESIAN_POINT('',(-0.329701557341,-4.267144758787E-02,6.E-02) + ); +#96404 = CARTESIAN_POINT('',(-0.345606023802,-3.711919328272E-02,6.E-02) + ); +#96405 = CARTESIAN_POINT('',(-0.362439330042,-3.269176850204E-02,6.E-02) + ); +#96406 = CARTESIAN_POINT('',(-0.380089573199,-2.913356062749E-02,6.E-02) + ); +#96407 = CARTESIAN_POINT('',(-0.398650277816,-2.672345893411E-02,6.E-02) + ); +#96408 = CARTESIAN_POINT('',(-0.418047912282,-2.51369674284E-02,6.E-02) + ); +#96409 = CARTESIAN_POINT('',(-0.43128381562,-2.49817325598E-02,6.E-02)); +#96410 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96411 = ORIENTED_EDGE('',*,*,#96412,.T.); +#96412 = EDGE_CURVE('',#96397,#80022,#96413,.T.); +#96413 = LINE('',#96414,#96415); +#96414 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96415 = VECTOR('',#96416,1.); +#96416 = DIRECTION('',(-0.,-0.,-1.)); +#96417 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96418,#96419) + ,(#96420,#96421) + ,(#96422,#96423) + ,(#96424,#96425) + ,(#96426,#96427) + ,(#96428,#96429) + ,(#96430,#96431) + ,(#96432,#96433) + ,(#96434,#96435) + ,(#96436,#96437) + ,(#96438,#96439 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.112448389909,0.226527675213,0.344401949326,0.465864972487, + 0.591659449352,0.722168487025,0.858606387555,1.),(0.,1.), + .UNSPECIFIED.); +#96418 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,6.E-02) + ); +#96419 = CARTESIAN_POINT('',(-0.300443592925,-5.691492577656E-02,5.E-02) + ); +#96420 = CARTESIAN_POINT('',(-0.305135288312,-5.432530094161E-02,6.E-02) + ); +#96421 = CARTESIAN_POINT('',(-0.305135288312,-5.432530094161E-02,5.E-02) + ); +#96422 = CARTESIAN_POINT('',(-0.314586725099,-4.910849264396E-02,6.E-02) + ); +#96423 = CARTESIAN_POINT('',(-0.314586725099,-4.910849264396E-02,5.E-02) + ); +#96424 = CARTESIAN_POINT('',(-0.329701557341,-4.267144758787E-02,6.E-02) + ); +#96425 = CARTESIAN_POINT('',(-0.329701557341,-4.267144758787E-02,5.E-02) + ); +#96426 = CARTESIAN_POINT('',(-0.345606023802,-3.711919328272E-02,6.E-02) + ); +#96427 = CARTESIAN_POINT('',(-0.345606023802,-3.711919328272E-02,5.E-02) + ); +#96428 = CARTESIAN_POINT('',(-0.362439330042,-3.269176850204E-02,6.E-02) + ); +#96429 = CARTESIAN_POINT('',(-0.362439330042,-3.269176850204E-02,5.E-02) + ); +#96430 = CARTESIAN_POINT('',(-0.380089573199,-2.913356062749E-02,6.E-02) + ); +#96431 = CARTESIAN_POINT('',(-0.380089573199,-2.913356062749E-02,5.E-02) + ); +#96432 = CARTESIAN_POINT('',(-0.398650277816,-2.672345893411E-02,6.E-02) + ); +#96433 = CARTESIAN_POINT('',(-0.398650277816,-2.672345893411E-02,5.E-02) + ); +#96434 = CARTESIAN_POINT('',(-0.418047912282,-2.51369674284E-02,6.E-02) + ); +#96435 = CARTESIAN_POINT('',(-0.418047912282,-2.51369674284E-02,5.E-02) + ); +#96436 = CARTESIAN_POINT('',(-0.43128381562,-2.49817325598E-02,6.E-02)); +#96437 = CARTESIAN_POINT('',(-0.43128381562,-2.49817325598E-02,5.E-02)); +#96438 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96439 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,5.E-02) + ); +#96440 = ADVANCED_FACE('',(#96441),#96475,.T.); +#96441 = FACE_BOUND('',#96442,.T.); +#96442 = EDGE_LOOP('',(#96443,#96444,#96445,#96469)); +#96443 = ORIENTED_EDGE('',*,*,#80037,.F.); +#96444 = ORIENTED_EDGE('',*,*,#96412,.F.); +#96445 = ORIENTED_EDGE('',*,*,#96446,.T.); +#96446 = EDGE_CURVE('',#96397,#96447,#96449,.T.); +#96447 = VERTEX_POINT('',#96448); +#96448 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96449 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96450,#96451,#96452,#96453, + #96454,#96455,#96456,#96457,#96458,#96459,#96460,#96461,#96462, + #96463,#96464,#96465,#96466,#96467,#96468),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.783841660733E-02, + 0.132665643409,0.195065744795,0.255523430951,0.314848330906, + 0.373440774013,0.432587188646,0.492296890479,0.552542106835, + 0.61238845435,0.672490239269,0.733818090709,0.796578741274, + 0.861439243281,0.929193548085,1.),.UNSPECIFIED.); +#96450 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96451 = CARTESIAN_POINT('',(-0.446699001869,-2.509729135389E-02,6.E-02) + ); +#96452 = CARTESIAN_POINT('',(-0.463672131665,-2.547777665473E-02,6.E-02) + ); +#96453 = CARTESIAN_POINT('',(-0.488473139476,-2.864830815725E-02,6.E-02) + ); +#96454 = CARTESIAN_POINT('',(-0.511904260178,-3.401167866811E-02,6.E-02) + ); +#96455 = CARTESIAN_POINT('',(-0.534080850627,-4.130435031042E-02,6.E-02) + ); +#96456 = CARTESIAN_POINT('',(-0.554844958553,-5.087987111384E-02,6.E-02) + ); +#96457 = CARTESIAN_POINT('',(-0.574274201574,-6.26069713848E-02,6.E-02) + ); +#96458 = CARTESIAN_POINT('',(-0.592303077822,-7.647086856828E-02,6.E-02) + ); +#96459 = CARTESIAN_POINT('',(-0.608901820615,-9.232068183016E-02,6.E-02) + ); +#96460 = CARTESIAN_POINT('',(-0.623803694689,-0.109891559963,6.E-02)); +#96461 = CARTESIAN_POINT('',(-0.636843860028,-0.12894820152,6.E-02)); +#96462 = CARTESIAN_POINT('',(-0.647843558343,-0.149404723804,6.E-02)); +#96463 = CARTESIAN_POINT('',(-0.656938169152,-0.171180763624,6.E-02)); +#96464 = CARTESIAN_POINT('',(-0.663877455007,-0.194376880065,6.E-02)); +#96465 = CARTESIAN_POINT('',(-0.668765547864,-0.218907773945,6.E-02)); +#96466 = CARTESIAN_POINT('',(-0.671932085488,-0.244776759977,6.E-02)); +#96467 = CARTESIAN_POINT('',(-0.672238321582,-0.262507483484,6.E-02)); +#96468 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96469 = ORIENTED_EDGE('',*,*,#96470,.T.); +#96470 = EDGE_CURVE('',#96447,#80038,#96471,.T.); +#96471 = LINE('',#96472,#96473); +#96472 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96473 = VECTOR('',#96474,1.); +#96474 = DIRECTION('',(-0.,-0.,-1.)); +#96475 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96476,#96477) + ,(#96478,#96479) + ,(#96480,#96481) + ,(#96482,#96483) + ,(#96484,#96485) + ,(#96486,#96487) + ,(#96488,#96489) + ,(#96490,#96491) + ,(#96492,#96493) + ,(#96494,#96495) + ,(#96496,#96497) + ,(#96498,#96499) + ,(#96500,#96501) + ,(#96502,#96503) + ,(#96504,#96505) + ,(#96506,#96507) + ,(#96508,#96509) + ,(#96510,#96511) + ,(#96512,#96513 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.783841660733E-02,0.132665643409,0.195065744795, + 0.255523430951,0.314848330906,0.373440774013,0.432587188646, + 0.492296890479,0.552542106835,0.61238845435,0.672490239269, + 0.733818090709,0.796578741274,0.861439243281,0.929193548085,1.),(0., + 1.),.UNSPECIFIED.); +#96476 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,6.E-02) + ); +#96477 = CARTESIAN_POINT('',(-0.438019812437,-2.490273065461E-02,5.E-02) + ); +#96478 = CARTESIAN_POINT('',(-0.446699001869,-2.509729135389E-02,6.E-02) + ); +#96479 = CARTESIAN_POINT('',(-0.446699001869,-2.509729135389E-02,5.E-02) + ); +#96480 = CARTESIAN_POINT('',(-0.463672131665,-2.547777665473E-02,6.E-02) + ); +#96481 = CARTESIAN_POINT('',(-0.463672131665,-2.547777665473E-02,5.E-02) + ); +#96482 = CARTESIAN_POINT('',(-0.488473139476,-2.864830815725E-02,6.E-02) + ); +#96483 = CARTESIAN_POINT('',(-0.488473139476,-2.864830815725E-02,5.E-02) + ); +#96484 = CARTESIAN_POINT('',(-0.511904260178,-3.401167866811E-02,6.E-02) + ); +#96485 = CARTESIAN_POINT('',(-0.511904260178,-3.401167866811E-02,5.E-02) + ); +#96486 = CARTESIAN_POINT('',(-0.534080850627,-4.130435031042E-02,6.E-02) + ); +#96487 = CARTESIAN_POINT('',(-0.534080850627,-4.130435031042E-02,5.E-02) + ); +#96488 = CARTESIAN_POINT('',(-0.554844958553,-5.087987111384E-02,6.E-02) + ); +#96489 = CARTESIAN_POINT('',(-0.554844958553,-5.087987111384E-02,5.E-02) + ); +#96490 = CARTESIAN_POINT('',(-0.574274201574,-6.26069713848E-02,6.E-02) + ); +#96491 = CARTESIAN_POINT('',(-0.574274201574,-6.26069713848E-02,5.E-02) + ); +#96492 = CARTESIAN_POINT('',(-0.592303077822,-7.647086856828E-02,6.E-02) + ); +#96493 = CARTESIAN_POINT('',(-0.592303077822,-7.647086856828E-02,5.E-02) + ); +#96494 = CARTESIAN_POINT('',(-0.608901820615,-9.232068183016E-02,6.E-02) + ); +#96495 = CARTESIAN_POINT('',(-0.608901820615,-9.232068183016E-02,5.E-02) + ); +#96496 = CARTESIAN_POINT('',(-0.623803694689,-0.109891559963,6.E-02)); +#96497 = CARTESIAN_POINT('',(-0.623803694689,-0.109891559963,5.E-02)); +#96498 = CARTESIAN_POINT('',(-0.636843860028,-0.12894820152,6.E-02)); +#96499 = CARTESIAN_POINT('',(-0.636843860028,-0.12894820152,5.E-02)); +#96500 = CARTESIAN_POINT('',(-0.647843558343,-0.149404723804,6.E-02)); +#96501 = CARTESIAN_POINT('',(-0.647843558343,-0.149404723804,5.E-02)); +#96502 = CARTESIAN_POINT('',(-0.656938169152,-0.171180763624,6.E-02)); +#96503 = CARTESIAN_POINT('',(-0.656938169152,-0.171180763624,5.E-02)); +#96504 = CARTESIAN_POINT('',(-0.663877455007,-0.194376880065,6.E-02)); +#96505 = CARTESIAN_POINT('',(-0.663877455007,-0.194376880065,5.E-02)); +#96506 = CARTESIAN_POINT('',(-0.668765547864,-0.218907773945,6.E-02)); +#96507 = CARTESIAN_POINT('',(-0.668765547864,-0.218907773945,5.E-02)); +#96508 = CARTESIAN_POINT('',(-0.671932085488,-0.244776759977,6.E-02)); +#96509 = CARTESIAN_POINT('',(-0.671932085488,-0.244776759977,5.E-02)); +#96510 = CARTESIAN_POINT('',(-0.672238321582,-0.262507483484,6.E-02)); +#96511 = CARTESIAN_POINT('',(-0.672238321582,-0.262507483484,5.E-02)); +#96512 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96513 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,5.E-02)); +#96514 = ADVANCED_FACE('',(#96515),#96549,.T.); +#96515 = FACE_BOUND('',#96516,.T.); +#96516 = EDGE_LOOP('',(#96517,#96518,#96519,#96543)); +#96517 = ORIENTED_EDGE('',*,*,#80061,.F.); +#96518 = ORIENTED_EDGE('',*,*,#96470,.F.); +#96519 = ORIENTED_EDGE('',*,*,#96520,.T.); +#96520 = EDGE_CURVE('',#96447,#96521,#96523,.T.); +#96521 = VERTEX_POINT('',#96522); +#96522 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96523 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96524,#96525,#96526,#96527, + #96528,#96529,#96530,#96531,#96532,#96533,#96534,#96535,#96536, + #96537,#96538,#96539,#96540,#96541,#96542),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.063773301118E-02, + 0.13824500117,0.2033468934,0.266231764643,0.328110624574, + 0.388737346952,0.449605806425,0.511038084245,0.572095061666, + 0.631883581169,0.691143381876,0.750381181209,0.810048996234, + 0.871373350146,0.934432697147,1.),.UNSPECIFIED.); +#96524 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96525 = CARTESIAN_POINT('',(-0.672176148381,-0.281295593077,6.E-02)); +#96526 = CARTESIAN_POINT('',(-0.671748201286,-0.300333202332,6.E-02)); +#96527 = CARTESIAN_POINT('',(-0.668373296918,-0.328175740856,6.E-02)); +#96528 = CARTESIAN_POINT('',(-0.662771429586,-0.354548755655,6.E-02)); +#96529 = CARTESIAN_POINT('',(-0.654970216249,-0.379547244964,6.E-02)); +#96530 = CARTESIAN_POINT('',(-0.644746237669,-0.402987393729,6.E-02)); +#96531 = CARTESIAN_POINT('',(-0.632355241386,-0.425033248793,6.E-02)); +#96532 = CARTESIAN_POINT('',(-0.617738411761,-0.445605436527,6.E-02)); +#96533 = CARTESIAN_POINT('',(-0.600896307709,-0.464478687831,6.E-02)); +#96534 = CARTESIAN_POINT('',(-0.582355409772,-0.481440060594,6.E-02)); +#96535 = CARTESIAN_POINT('',(-0.5625936131,-0.496500137762,6.E-02)); +#96536 = CARTESIAN_POINT('',(-0.541380893844,-0.508947094029,6.E-02)); +#96537 = CARTESIAN_POINT('',(-0.519122642047,-0.519354678672,6.E-02)); +#96538 = CARTESIAN_POINT('',(-0.495547991791,-0.527262236998,6.E-02)); +#96539 = CARTESIAN_POINT('',(-0.470823881912,-0.532952254702,6.E-02)); +#96540 = CARTESIAN_POINT('',(-0.444853697362,-0.536475375389,6.E-02)); +#96541 = CARTESIAN_POINT('',(-0.427138015525,-0.536887680499,6.E-02)); +#96542 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96543 = ORIENTED_EDGE('',*,*,#96544,.T.); +#96544 = EDGE_CURVE('',#96521,#80062,#96545,.T.); +#96545 = LINE('',#96546,#96547); +#96546 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96547 = VECTOR('',#96548,1.); +#96548 = DIRECTION('',(-0.,-0.,-1.)); +#96549 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96550,#96551) + ,(#96552,#96553) + ,(#96554,#96555) + ,(#96556,#96557) + ,(#96558,#96559) + ,(#96560,#96561) + ,(#96562,#96563) + ,(#96564,#96565) + ,(#96566,#96567) + ,(#96568,#96569) + ,(#96570,#96571) + ,(#96572,#96573) + ,(#96574,#96575) + ,(#96576,#96577) + ,(#96578,#96579) + ,(#96580,#96581) + ,(#96582,#96583) + ,(#96584,#96585) + ,(#96586,#96587 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.063773301118E-02,0.13824500117,0.2033468934,0.266231764643, + 0.328110624574,0.388737346952,0.449605806425,0.511038084245, + 0.572095061666,0.631883581169,0.691143381876,0.750381181209, + 0.810048996234,0.871373350146,0.934432697147,1.),(0.,1.), + .UNSPECIFIED.); +#96550 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,6.E-02)); +#96551 = CARTESIAN_POINT('',(-0.672394812437,-0.271568126996,5.E-02)); +#96552 = CARTESIAN_POINT('',(-0.672176148381,-0.281295593077,6.E-02)); +#96553 = CARTESIAN_POINT('',(-0.672176148381,-0.281295593077,5.E-02)); +#96554 = CARTESIAN_POINT('',(-0.671748201286,-0.300333202332,6.E-02)); +#96555 = CARTESIAN_POINT('',(-0.671748201286,-0.300333202332,5.E-02)); +#96556 = CARTESIAN_POINT('',(-0.668373296918,-0.328175740856,6.E-02)); +#96557 = CARTESIAN_POINT('',(-0.668373296918,-0.328175740856,5.E-02)); +#96558 = CARTESIAN_POINT('',(-0.662771429586,-0.354548755655,6.E-02)); +#96559 = CARTESIAN_POINT('',(-0.662771429586,-0.354548755655,5.E-02)); +#96560 = CARTESIAN_POINT('',(-0.654970216249,-0.379547244964,6.E-02)); +#96561 = CARTESIAN_POINT('',(-0.654970216249,-0.379547244964,5.E-02)); +#96562 = CARTESIAN_POINT('',(-0.644746237669,-0.402987393729,6.E-02)); +#96563 = CARTESIAN_POINT('',(-0.644746237669,-0.402987393729,5.E-02)); +#96564 = CARTESIAN_POINT('',(-0.632355241386,-0.425033248793,6.E-02)); +#96565 = CARTESIAN_POINT('',(-0.632355241386,-0.425033248793,5.E-02)); +#96566 = CARTESIAN_POINT('',(-0.617738411761,-0.445605436527,6.E-02)); +#96567 = CARTESIAN_POINT('',(-0.617738411761,-0.445605436527,5.E-02)); +#96568 = CARTESIAN_POINT('',(-0.600896307709,-0.464478687831,6.E-02)); +#96569 = CARTESIAN_POINT('',(-0.600896307709,-0.464478687831,5.E-02)); +#96570 = CARTESIAN_POINT('',(-0.582355409772,-0.481440060594,6.E-02)); +#96571 = CARTESIAN_POINT('',(-0.582355409772,-0.481440060594,5.E-02)); +#96572 = CARTESIAN_POINT('',(-0.5625936131,-0.496500137762,6.E-02)); +#96573 = CARTESIAN_POINT('',(-0.5625936131,-0.496500137762,5.E-02)); +#96574 = CARTESIAN_POINT('',(-0.541380893844,-0.508947094029,6.E-02)); +#96575 = CARTESIAN_POINT('',(-0.541380893844,-0.508947094029,5.E-02)); +#96576 = CARTESIAN_POINT('',(-0.519122642047,-0.519354678672,6.E-02)); +#96577 = CARTESIAN_POINT('',(-0.519122642047,-0.519354678672,5.E-02)); +#96578 = CARTESIAN_POINT('',(-0.495547991791,-0.527262236998,6.E-02)); +#96579 = CARTESIAN_POINT('',(-0.495547991791,-0.527262236998,5.E-02)); +#96580 = CARTESIAN_POINT('',(-0.470823881912,-0.532952254702,6.E-02)); +#96581 = CARTESIAN_POINT('',(-0.470823881912,-0.532952254702,5.E-02)); +#96582 = CARTESIAN_POINT('',(-0.444853697362,-0.536475375389,6.E-02)); +#96583 = CARTESIAN_POINT('',(-0.444853697362,-0.536475375389,5.E-02)); +#96584 = CARTESIAN_POINT('',(-0.427138015525,-0.536887680499,6.E-02)); +#96585 = CARTESIAN_POINT('',(-0.427138015525,-0.536887680499,5.E-02)); +#96586 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96587 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,5.E-02)); +#96588 = ADVANCED_FACE('',(#96589),#96615,.T.); +#96589 = FACE_BOUND('',#96590,.T.); +#96590 = EDGE_LOOP('',(#96591,#96592,#96593,#96609)); +#96591 = ORIENTED_EDGE('',*,*,#80085,.F.); +#96592 = ORIENTED_EDGE('',*,*,#96544,.F.); +#96593 = ORIENTED_EDGE('',*,*,#96594,.T.); +#96594 = EDGE_CURVE('',#96521,#96595,#96597,.T.); +#96595 = VERTEX_POINT('',#96596); +#96596 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96597 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96598,#96599,#96600,#96601, + #96602,#96603,#96604,#96605,#96606,#96607,#96608),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.145186866472,0.28344261092, + 0.416524365929,0.543181123535,0.665153082638,0.781360206313, + 0.892756655642,1.),.UNSPECIFIED.); +#96598 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96599 = CARTESIAN_POINT('',(-0.412294034564,-0.537056180388,6.E-02)); +#96600 = CARTESIAN_POINT('',(-0.40094470314,-0.536974825356,6.E-02)); +#96601 = CARTESIAN_POINT('',(-0.384295080656,-0.535954625723,6.E-02)); +#96602 = CARTESIAN_POINT('',(-0.368421442092,-0.534512771364,6.E-02)); +#96603 = CARTESIAN_POINT('',(-0.353300816422,-0.532264460496,6.E-02)); +#96604 = CARTESIAN_POINT('',(-0.338933981681,-0.5295880808,6.E-02)); +#96605 = CARTESIAN_POINT('',(-0.325374758201,-0.526099291537,6.E-02)); +#96606 = CARTESIAN_POINT('',(-0.312537910033,-0.522190129394,6.E-02)); +#96607 = CARTESIAN_POINT('',(-0.30442365468,-0.518896374251,6.E-02)); +#96608 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96609 = ORIENTED_EDGE('',*,*,#96610,.T.); +#96610 = EDGE_CURVE('',#96595,#80086,#96611,.T.); +#96611 = LINE('',#96612,#96613); +#96612 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96613 = VECTOR('',#96614,1.); +#96614 = DIRECTION('',(-0.,-0.,-1.)); +#96615 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96616,#96617) + ,(#96618,#96619) + ,(#96620,#96621) + ,(#96622,#96623) + ,(#96624,#96625) + ,(#96626,#96627) + ,(#96628,#96629) + ,(#96630,#96631) + ,(#96632,#96633) + ,(#96634,#96635) + ,(#96636,#96637 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.145186866472,0.28344261092,0.416524365929,0.543181123535, + 0.665153082638,0.781360206313,0.892756655642,1.),(0.,1.), + .UNSPECIFIED.); +#96616 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,6.E-02)); +#96617 = CARTESIAN_POINT('',(-0.418107464876,-0.537097852606,5.E-02)); +#96618 = CARTESIAN_POINT('',(-0.412294034564,-0.537056180388,6.E-02)); +#96619 = CARTESIAN_POINT('',(-0.412294034564,-0.537056180388,5.E-02)); +#96620 = CARTESIAN_POINT('',(-0.40094470314,-0.536974825356,6.E-02)); +#96621 = CARTESIAN_POINT('',(-0.40094470314,-0.536974825356,5.E-02)); +#96622 = CARTESIAN_POINT('',(-0.384295080656,-0.535954625723,6.E-02)); +#96623 = CARTESIAN_POINT('',(-0.384295080656,-0.535954625723,5.E-02)); +#96624 = CARTESIAN_POINT('',(-0.368421442092,-0.534512771364,6.E-02)); +#96625 = CARTESIAN_POINT('',(-0.368421442092,-0.534512771364,5.E-02)); +#96626 = CARTESIAN_POINT('',(-0.353300816422,-0.532264460496,6.E-02)); +#96627 = CARTESIAN_POINT('',(-0.353300816422,-0.532264460496,5.E-02)); +#96628 = CARTESIAN_POINT('',(-0.338933981681,-0.5295880808,6.E-02)); +#96629 = CARTESIAN_POINT('',(-0.338933981681,-0.5295880808,5.E-02)); +#96630 = CARTESIAN_POINT('',(-0.325374758201,-0.526099291537,6.E-02)); +#96631 = CARTESIAN_POINT('',(-0.325374758201,-0.526099291537,5.E-02)); +#96632 = CARTESIAN_POINT('',(-0.312537910033,-0.522190129394,6.E-02)); +#96633 = CARTESIAN_POINT('',(-0.312537910033,-0.522190129394,5.E-02)); +#96634 = CARTESIAN_POINT('',(-0.30442365468,-0.518896374251,6.E-02)); +#96635 = CARTESIAN_POINT('',(-0.30442365468,-0.518896374251,5.E-02)); +#96636 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96637 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,5.E-02)); +#96638 = ADVANCED_FACE('',(#96639),#96657,.T.); +#96639 = FACE_BOUND('',#96640,.T.); +#96640 = EDGE_LOOP('',(#96641,#96642,#96643,#96651)); +#96641 = ORIENTED_EDGE('',*,*,#80101,.F.); +#96642 = ORIENTED_EDGE('',*,*,#96610,.F.); +#96643 = ORIENTED_EDGE('',*,*,#96644,.T.); +#96644 = EDGE_CURVE('',#96595,#96645,#96647,.T.); +#96645 = VERTEX_POINT('',#96646); +#96646 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,6.E-02)); +#96647 = LINE('',#96648,#96649); +#96648 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96649 = VECTOR('',#96650,1.); +#96650 = DIRECTION('',(0.,1.,0.)); +#96651 = ORIENTED_EDGE('',*,*,#96652,.T.); +#96652 = EDGE_CURVE('',#96645,#80102,#96653,.T.); +#96653 = LINE('',#96654,#96655); +#96654 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,6.E-02)); +#96655 = VECTOR('',#96656,1.); +#96656 = DIRECTION('',(-0.,-0.,-1.)); +#96657 = PLANE('',#96658); +#96658 = AXIS2_PLACEMENT_3D('',#96659,#96660,#96661); +#96659 = CARTESIAN_POINT('',(-0.300443592925,-0.517280779435,6.E-02)); +#96660 = DIRECTION('',(-1.,0.,0.)); +#96661 = DIRECTION('',(0.,0.,1.)); +#96662 = ADVANCED_FACE('',(#96663),#96689,.T.); +#96663 = FACE_BOUND('',#96664,.T.); +#96664 = EDGE_LOOP('',(#96665,#96666,#96667,#96683)); +#96665 = ORIENTED_EDGE('',*,*,#80109,.F.); +#96666 = ORIENTED_EDGE('',*,*,#96652,.F.); +#96667 = ORIENTED_EDGE('',*,*,#96668,.T.); +#96668 = EDGE_CURVE('',#96645,#96669,#96671,.T.); +#96669 = VERTEX_POINT('',#96670); +#96670 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96671 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96672,#96673,#96674,#96675, + #96676,#96677,#96678,#96679,#96680,#96681,#96682),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.125279696736,0.249419970742, + 0.373356799493,0.496681278782,0.620202915744,0.745086320161, + 0.871269195019,1.),.UNSPECIFIED.); +#96672 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,6.E-02)); +#96673 = CARTESIAN_POINT('',(-0.304883785739,-0.452787695199,6.E-02)); +#96674 = CARTESIAN_POINT('',(-0.313723787675,-0.457924402224,6.E-02)); +#96675 = CARTESIAN_POINT('',(-0.327627503482,-0.464346296937,6.E-02)); +#96676 = CARTESIAN_POINT('',(-0.341799125057,-0.469916366024,6.E-02)); +#96677 = CARTESIAN_POINT('',(-0.356337860835,-0.474362866439,6.E-02)); +#96678 = CARTESIAN_POINT('',(-0.371152208332,-0.477953449649,6.E-02)); +#96679 = CARTESIAN_POINT('',(-0.386319851002,-0.480361755006,6.E-02)); +#96680 = CARTESIAN_POINT('',(-0.401812051536,-0.4819820718,6.E-02)); +#96681 = CARTESIAN_POINT('',(-0.41225975368,-0.482140033527,6.E-02)); +#96682 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96683 = ORIENTED_EDGE('',*,*,#96684,.T.); +#96684 = EDGE_CURVE('',#96669,#80110,#96685,.T.); +#96685 = LINE('',#96686,#96687); +#96686 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96687 = VECTOR('',#96688,1.); +#96688 = DIRECTION('',(-0.,-0.,-1.)); +#96689 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96690,#96691) + ,(#96692,#96693) + ,(#96694,#96695) + ,(#96696,#96697) + ,(#96698,#96699) + ,(#96700,#96701) + ,(#96702,#96703) + ,(#96704,#96705) + ,(#96706,#96707) + ,(#96708,#96709) + ,(#96710,#96711 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.125279696736,0.249419970742,0.373356799493,0.496681278782, + 0.620202915744,0.745086320161,0.871269195019,1.),(0.,1.), + .UNSPECIFIED.); +#96690 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,6.E-02)); +#96691 = CARTESIAN_POINT('',(-0.300443592925,-0.450207608703,5.E-02)); +#96692 = CARTESIAN_POINT('',(-0.304883785739,-0.452787695199,6.E-02)); +#96693 = CARTESIAN_POINT('',(-0.304883785739,-0.452787695199,5.E-02)); +#96694 = CARTESIAN_POINT('',(-0.313723787675,-0.457924402224,6.E-02)); +#96695 = CARTESIAN_POINT('',(-0.313723787675,-0.457924402224,5.E-02)); +#96696 = CARTESIAN_POINT('',(-0.327627503482,-0.464346296937,6.E-02)); +#96697 = CARTESIAN_POINT('',(-0.327627503482,-0.464346296937,5.E-02)); +#96698 = CARTESIAN_POINT('',(-0.341799125057,-0.469916366024,6.E-02)); +#96699 = CARTESIAN_POINT('',(-0.341799125057,-0.469916366024,5.E-02)); +#96700 = CARTESIAN_POINT('',(-0.356337860835,-0.474362866439,6.E-02)); +#96701 = CARTESIAN_POINT('',(-0.356337860835,-0.474362866439,5.E-02)); +#96702 = CARTESIAN_POINT('',(-0.371152208332,-0.477953449649,6.E-02)); +#96703 = CARTESIAN_POINT('',(-0.371152208332,-0.477953449649,5.E-02)); +#96704 = CARTESIAN_POINT('',(-0.386319851002,-0.480361755006,6.E-02)); +#96705 = CARTESIAN_POINT('',(-0.386319851002,-0.480361755006,5.E-02)); +#96706 = CARTESIAN_POINT('',(-0.401812051536,-0.4819820718,6.E-02)); +#96707 = CARTESIAN_POINT('',(-0.401812051536,-0.4819820718,5.E-02)); +#96708 = CARTESIAN_POINT('',(-0.41225975368,-0.482140033527,6.E-02)); +#96709 = CARTESIAN_POINT('',(-0.41225975368,-0.482140033527,5.E-02)); +#96710 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96711 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,5.E-02)); +#96712 = ADVANCED_FACE('',(#96713),#96747,.T.); +#96713 = FACE_BOUND('',#96714,.T.); +#96714 = EDGE_LOOP('',(#96715,#96716,#96717,#96741)); +#96715 = ORIENTED_EDGE('',*,*,#80125,.F.); +#96716 = ORIENTED_EDGE('',*,*,#96684,.F.); +#96717 = ORIENTED_EDGE('',*,*,#96718,.T.); +#96718 = EDGE_CURVE('',#96669,#96719,#96721,.T.); +#96719 = VERTEX_POINT('',#96720); +#96720 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96721 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96722,#96723,#96724,#96725, + #96726,#96727,#96728,#96729,#96730,#96731,#96732,#96733,#96734, + #96735,#96736,#96737,#96738,#96739,#96740),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,6.460651091173E-02, + 0.126707396677,0.186764158456,0.24561607929,0.303634260101, + 0.361487584679,0.420227043541,0.48002251282,0.540669691743, + 0.601185743116,0.662329843678,0.725019474255,0.789459456756, + 0.856499216937,0.92630919798,1.),.UNSPECIFIED.); +#96722 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96723 = CARTESIAN_POINT('',(-0.424310869402,-0.482075114977,6.E-02)); +#96724 = CARTESIAN_POINT('',(-0.4375982153,-0.481791348727,6.E-02)); +#96725 = CARTESIAN_POINT('',(-0.457003731547,-0.478972609973,6.E-02)); +#96726 = CARTESIAN_POINT('',(-0.475546666728,-0.474823908605,6.E-02)); +#96727 = CARTESIAN_POINT('',(-0.493017084498,-0.46849984702,6.E-02)); +#96728 = CARTESIAN_POINT('',(-0.509643361314,-0.460747744469,6.E-02)); +#96729 = CARTESIAN_POINT('',(-0.525156325439,-0.450966263838,6.E-02)); +#96730 = CARTESIAN_POINT('',(-0.539797730223,-0.439631138926,6.E-02)); +#96731 = CARTESIAN_POINT('',(-0.553298087831,-0.426531995916,6.E-02)); +#96732 = CARTESIAN_POINT('',(-0.565603959129,-0.412051838466,6.E-02)); +#96733 = CARTESIAN_POINT('',(-0.576160966355,-0.396086590988,6.E-02)); +#96734 = CARTESIAN_POINT('',(-0.585349643292,-0.379053791793,6.E-02)); +#96735 = CARTESIAN_POINT('',(-0.592615555223,-0.360667201268,6.E-02)); +#96736 = CARTESIAN_POINT('',(-0.598356849114,-0.341119559592,6.E-02)); +#96737 = CARTESIAN_POINT('',(-0.602431950993,-0.320394251735,6.E-02)); +#96738 = CARTESIAN_POINT('',(-0.604812398168,-0.298427693399,6.E-02)); +#96739 = CARTESIAN_POINT('',(-0.605148860773,-0.283388091486,6.E-02)); +#96740 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96741 = ORIENTED_EDGE('',*,*,#96742,.T.); +#96742 = EDGE_CURVE('',#96719,#80126,#96743,.T.); +#96743 = LINE('',#96744,#96745); +#96744 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96745 = VECTOR('',#96746,1.); +#96746 = DIRECTION('',(-0.,-0.,-1.)); +#96747 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96748,#96749) + ,(#96750,#96751) + ,(#96752,#96753) + ,(#96754,#96755) + ,(#96756,#96757) + ,(#96758,#96759) + ,(#96760,#96761) + ,(#96762,#96763) + ,(#96764,#96765) + ,(#96766,#96767) + ,(#96768,#96769) + ,(#96770,#96771) + ,(#96772,#96773) + ,(#96774,#96775) + ,(#96776,#96777) + ,(#96778,#96779) + ,(#96780,#96781) + ,(#96782,#96783) + ,(#96784,#96785 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,6.460651091173E-02,0.126707396677,0.186764158456, + 0.24561607929,0.303634260101,0.361487584679,0.420227043541, + 0.48002251282,0.540669691743,0.601185743116,0.662329843678, + 0.725019474255,0.789459456756,0.856499216937,0.92630919798,1.),(0., + 1.),.UNSPECIFIED.); +#96748 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,6.E-02)); +#96749 = CARTESIAN_POINT('',(-0.417535818535,-0.482219803825,5.E-02)); +#96750 = CARTESIAN_POINT('',(-0.424310869402,-0.482075114977,6.E-02)); +#96751 = CARTESIAN_POINT('',(-0.424310869402,-0.482075114977,5.E-02)); +#96752 = CARTESIAN_POINT('',(-0.4375982153,-0.481791348727,6.E-02)); +#96753 = CARTESIAN_POINT('',(-0.4375982153,-0.481791348727,5.E-02)); +#96754 = CARTESIAN_POINT('',(-0.457003731547,-0.478972609973,6.E-02)); +#96755 = CARTESIAN_POINT('',(-0.457003731547,-0.478972609973,5.E-02)); +#96756 = CARTESIAN_POINT('',(-0.475546666728,-0.474823908605,6.E-02)); +#96757 = CARTESIAN_POINT('',(-0.475546666728,-0.474823908605,5.E-02)); +#96758 = CARTESIAN_POINT('',(-0.493017084498,-0.46849984702,6.E-02)); +#96759 = CARTESIAN_POINT('',(-0.493017084498,-0.46849984702,5.E-02)); +#96760 = CARTESIAN_POINT('',(-0.509643361314,-0.460747744469,6.E-02)); +#96761 = CARTESIAN_POINT('',(-0.509643361314,-0.460747744469,5.E-02)); +#96762 = CARTESIAN_POINT('',(-0.525156325439,-0.450966263838,6.E-02)); +#96763 = CARTESIAN_POINT('',(-0.525156325439,-0.450966263838,5.E-02)); +#96764 = CARTESIAN_POINT('',(-0.539797730223,-0.439631138926,6.E-02)); +#96765 = CARTESIAN_POINT('',(-0.539797730223,-0.439631138926,5.E-02)); +#96766 = CARTESIAN_POINT('',(-0.553298087831,-0.426531995916,6.E-02)); +#96767 = CARTESIAN_POINT('',(-0.553298087831,-0.426531995916,5.E-02)); +#96768 = CARTESIAN_POINT('',(-0.565603959129,-0.412051838466,6.E-02)); +#96769 = CARTESIAN_POINT('',(-0.565603959129,-0.412051838466,5.E-02)); +#96770 = CARTESIAN_POINT('',(-0.576160966355,-0.396086590988,6.E-02)); +#96771 = CARTESIAN_POINT('',(-0.576160966355,-0.396086590988,5.E-02)); +#96772 = CARTESIAN_POINT('',(-0.585349643292,-0.379053791793,6.E-02)); +#96773 = CARTESIAN_POINT('',(-0.585349643292,-0.379053791793,5.E-02)); +#96774 = CARTESIAN_POINT('',(-0.592615555223,-0.360667201268,6.E-02)); +#96775 = CARTESIAN_POINT('',(-0.592615555223,-0.360667201268,5.E-02)); +#96776 = CARTESIAN_POINT('',(-0.598356849114,-0.341119559592,6.E-02)); +#96777 = CARTESIAN_POINT('',(-0.598356849114,-0.341119559592,5.E-02)); +#96778 = CARTESIAN_POINT('',(-0.602431950993,-0.320394251735,6.E-02)); +#96779 = CARTESIAN_POINT('',(-0.602431950993,-0.320394251735,5.E-02)); +#96780 = CARTESIAN_POINT('',(-0.604812398168,-0.298427693399,6.E-02)); +#96781 = CARTESIAN_POINT('',(-0.604812398168,-0.298427693399,5.E-02)); +#96782 = CARTESIAN_POINT('',(-0.605148860773,-0.283388091486,6.E-02)); +#96783 = CARTESIAN_POINT('',(-0.605148860773,-0.283388091486,5.E-02)); +#96784 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96785 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,5.E-02)); +#96786 = ADVANCED_FACE('',(#96787),#96821,.T.); +#96787 = FACE_BOUND('',#96788,.T.); +#96788 = EDGE_LOOP('',(#96789,#96790,#96791,#96815)); +#96789 = ORIENTED_EDGE('',*,*,#80149,.F.); +#96790 = ORIENTED_EDGE('',*,*,#96742,.F.); +#96791 = ORIENTED_EDGE('',*,*,#96792,.T.); +#96792 = EDGE_CURVE('',#96719,#96793,#96795,.T.); +#96793 = VERTEX_POINT('',#96794); +#96794 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96795 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96796,#96797,#96798,#96799, + #96800,#96801,#96802,#96803,#96804,#96805,#96806,#96807,#96808, + #96809,#96810,#96811,#96812,#96813,#96814),.UNSPECIFIED.,.F.,.F.,(4, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.378258718587E-02, + 0.144095652163,0.211372776945,0.276108573914,0.338559771335, + 0.399646477988,0.460022357923,0.520364180104,0.579989743327, + 0.638421673378,0.696329698138,0.753973538922,0.812784195164, + 0.872739820247,0.935174557152,1.),.UNSPECIFIED.); +#96796 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96797 = CARTESIAN_POINT('',(-0.60518276358,-0.268354306426,6.E-02)); +#96798 = CARTESIAN_POINT('',(-0.604911537878,-0.254076839301,6.E-02)); +#96799 = CARTESIAN_POINT('',(-0.602580301914,-0.233238230051,6.E-02)); +#96800 = CARTESIAN_POINT('',(-0.598806255601,-0.213534051372,6.E-02)); +#96801 = CARTESIAN_POINT('',(-0.593494527421,-0.194986419725,6.E-02)); +#96802 = CARTESIAN_POINT('',(-0.586605651776,-0.177621902298,6.E-02)); +#96803 = CARTESIAN_POINT('',(-0.578192957903,-0.161425688481,6.E-02)); +#96804 = CARTESIAN_POINT('',(-0.568232662047,-0.146380508706,6.E-02)); +#96805 = CARTESIAN_POINT('',(-0.55681922625,-0.132593596886,6.E-02)); +#96806 = CARTESIAN_POINT('',(-0.54416079038,-0.120216099528,6.E-02)); +#96807 = CARTESIAN_POINT('',(-0.53046878791,-0.10937703914,6.E-02)); +#96808 = CARTESIAN_POINT('',(-0.515848457893,-0.100183028112,6.E-02)); +#96809 = CARTESIAN_POINT('',(-0.500248086573,-9.268891085615E-02,6.E-02) + ); +#96810 = CARTESIAN_POINT('',(-0.483731913021,-8.686796805724E-02,6.E-02) + ); +#96811 = CARTESIAN_POINT('',(-0.466222201188,-8.279562363225E-02,6.E-02) + ); +#96812 = CARTESIAN_POINT('',(-0.447811408009,-8.027118376189E-02,6.E-02) + ); +#96813 = CARTESIAN_POINT('',(-0.435201563115,-7.994628207516E-02,6.E-02) + ); +#96814 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96815 = ORIENTED_EDGE('',*,*,#96816,.T.); +#96816 = EDGE_CURVE('',#96793,#79996,#96817,.T.); +#96817 = LINE('',#96818,#96819); +#96818 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96819 = VECTOR('',#96820,1.); +#96820 = DIRECTION('',(-0.,-0.,-1.)); +#96821 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96822,#96823) + ,(#96824,#96825) + ,(#96826,#96827) + ,(#96828,#96829) + ,(#96830,#96831) + ,(#96832,#96833) + ,(#96834,#96835) + ,(#96836,#96837) + ,(#96838,#96839) + ,(#96840,#96841) + ,(#96842,#96843) + ,(#96844,#96845) + ,(#96846,#96847) + ,(#96848,#96849) + ,(#96850,#96851) + ,(#96852,#96853) + ,(#96854,#96855) + ,(#96856,#96857) + ,(#96858,#96859 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(2, + 2),(0.,7.378258718587E-02,0.144095652163,0.211372776945, + 0.276108573914,0.338559771335,0.399646477988,0.460022357923, + 0.520364180104,0.579989743327,0.638421673378,0.696329698138, + 0.753973538922,0.812784195164,0.872739820247,0.935174557152,1.),(0., + 1.),.UNSPECIFIED.); +#96822 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,6.E-02)); +#96823 = CARTESIAN_POINT('',(-0.605321641705,-0.275664925777,5.E-02)); +#96824 = CARTESIAN_POINT('',(-0.60518276358,-0.268354306426,6.E-02)); +#96825 = CARTESIAN_POINT('',(-0.60518276358,-0.268354306426,5.E-02)); +#96826 = CARTESIAN_POINT('',(-0.604911537878,-0.254076839301,6.E-02)); +#96827 = CARTESIAN_POINT('',(-0.604911537878,-0.254076839301,5.E-02)); +#96828 = CARTESIAN_POINT('',(-0.602580301914,-0.233238230051,6.E-02)); +#96829 = CARTESIAN_POINT('',(-0.602580301914,-0.233238230051,5.E-02)); +#96830 = CARTESIAN_POINT('',(-0.598806255601,-0.213534051372,6.E-02)); +#96831 = CARTESIAN_POINT('',(-0.598806255601,-0.213534051372,5.E-02)); +#96832 = CARTESIAN_POINT('',(-0.593494527421,-0.194986419725,6.E-02)); +#96833 = CARTESIAN_POINT('',(-0.593494527421,-0.194986419725,5.E-02)); +#96834 = CARTESIAN_POINT('',(-0.586605651776,-0.177621902298,6.E-02)); +#96835 = CARTESIAN_POINT('',(-0.586605651776,-0.177621902298,5.E-02)); +#96836 = CARTESIAN_POINT('',(-0.578192957903,-0.161425688481,6.E-02)); +#96837 = CARTESIAN_POINT('',(-0.578192957903,-0.161425688481,5.E-02)); +#96838 = CARTESIAN_POINT('',(-0.568232662047,-0.146380508706,6.E-02)); +#96839 = CARTESIAN_POINT('',(-0.568232662047,-0.146380508706,5.E-02)); +#96840 = CARTESIAN_POINT('',(-0.55681922625,-0.132593596886,6.E-02)); +#96841 = CARTESIAN_POINT('',(-0.55681922625,-0.132593596886,5.E-02)); +#96842 = CARTESIAN_POINT('',(-0.54416079038,-0.120216099528,6.E-02)); +#96843 = CARTESIAN_POINT('',(-0.54416079038,-0.120216099528,5.E-02)); +#96844 = CARTESIAN_POINT('',(-0.53046878791,-0.10937703914,6.E-02)); +#96845 = CARTESIAN_POINT('',(-0.53046878791,-0.10937703914,5.E-02)); +#96846 = CARTESIAN_POINT('',(-0.515848457893,-0.100183028112,6.E-02)); +#96847 = CARTESIAN_POINT('',(-0.515848457893,-0.100183028112,5.E-02)); +#96848 = CARTESIAN_POINT('',(-0.500248086573,-9.268891085615E-02,6.E-02) + ); +#96849 = CARTESIAN_POINT('',(-0.500248086573,-9.268891085615E-02,5.E-02) + ); +#96850 = CARTESIAN_POINT('',(-0.483731913021,-8.686796805724E-02,6.E-02) + ); +#96851 = CARTESIAN_POINT('',(-0.483731913021,-8.686796805724E-02,5.E-02) + ); +#96852 = CARTESIAN_POINT('',(-0.466222201188,-8.279562363225E-02,6.E-02) + ); +#96853 = CARTESIAN_POINT('',(-0.466222201188,-8.279562363225E-02,5.E-02) + ); +#96854 = CARTESIAN_POINT('',(-0.447811408009,-8.027118376189E-02,6.E-02) + ); +#96855 = CARTESIAN_POINT('',(-0.447811408009,-8.027118376189E-02,5.E-02) + ); +#96856 = CARTESIAN_POINT('',(-0.435201563115,-7.994628207516E-02,6.E-02) + ); +#96857 = CARTESIAN_POINT('',(-0.435201563115,-7.994628207516E-02,5.E-02) + ); +#96858 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96859 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,5.E-02) + ); +#96860 = ADVANCED_FACE('',(#96861),#96880,.T.); +#96861 = FACE_BOUND('',#96862,.T.); +#96862 = EDGE_LOOP('',(#96863,#96864,#96865,#96879)); +#96863 = ORIENTED_EDGE('',*,*,#79995,.F.); +#96864 = ORIENTED_EDGE('',*,*,#96816,.F.); +#96865 = ORIENTED_EDGE('',*,*,#96866,.T.); +#96866 = EDGE_CURVE('',#96793,#96365,#96867,.T.); +#96867 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#96868,#96869,#96870,#96871, + #96872,#96873,#96874,#96875,#96876,#96877,#96878),.UNSPECIFIED.,.F., + .F.,(4,1,1,1,1,1,1,1,4),(0.,0.135294604763,0.266765657925, + 0.394816018836,0.520051654434,0.642175702971,0.762651820558, + 0.881834004381,1.),.UNSPECIFIED.); +#96868 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96869 = CARTESIAN_POINT('',(-0.422740486301,-7.98600497088E-02,6.E-02) + ); +#96870 = CARTESIAN_POINT('',(-0.410835697053,-8.001635000442E-02,6.E-02) + ); +#96871 = CARTESIAN_POINT('',(-0.393279756133,-8.162033747885E-02,6.E-02) + ); +#96872 = CARTESIAN_POINT('',(-0.376274641742,-8.403444713637E-02,6.E-02) + ); +#96873 = CARTESIAN_POINT('',(-0.359894266315,-8.758780449734E-02,6.E-02) + ); +#96874 = CARTESIAN_POINT('',(-0.344082469326,-9.203580592234E-02,6.E-02) + ); +#96875 = CARTESIAN_POINT('',(-0.328928892834,-9.762283647603E-02,6.E-02) + ); +#96876 = CARTESIAN_POINT('',(-0.314271613607,-0.104004380669,6.E-02)); +#96877 = CARTESIAN_POINT('',(-0.305039757989,-0.109204197468,6.E-02)); +#96878 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96879 = ORIENTED_EDGE('',*,*,#96364,.T.); +#96880 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#96881,#96882) + ,(#96883,#96884) + ,(#96885,#96886) + ,(#96887,#96888) + ,(#96889,#96890) + ,(#96891,#96892) + ,(#96893,#96894) + ,(#96895,#96896) + ,(#96897,#96898) + ,(#96899,#96900) + ,(#96901,#96902 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,4),(2,2),(0., + 0.135294604763,0.266765657925,0.394816018836,0.520051654434, + 0.642175702971,0.762651820558,0.881834004381,1.),(0.,1.), + .UNSPECIFIED.); +#96881 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,6.E-02) + ); +#96882 = CARTESIAN_POINT('',(-0.428778196583,-7.978077943509E-02,5.E-02) + ); +#96883 = CARTESIAN_POINT('',(-0.422740486301,-7.98600497088E-02,6.E-02) + ); +#96884 = CARTESIAN_POINT('',(-0.422740486301,-7.98600497088E-02,5.E-02) + ); +#96885 = CARTESIAN_POINT('',(-0.410835697053,-8.001635000442E-02,6.E-02) + ); +#96886 = CARTESIAN_POINT('',(-0.410835697053,-8.001635000442E-02,5.E-02) + ); +#96887 = CARTESIAN_POINT('',(-0.393279756133,-8.162033747885E-02,6.E-02) + ); +#96888 = CARTESIAN_POINT('',(-0.393279756133,-8.162033747885E-02,5.E-02) + ); +#96889 = CARTESIAN_POINT('',(-0.376274641742,-8.403444713637E-02,6.E-02) + ); +#96890 = CARTESIAN_POINT('',(-0.376274641742,-8.403444713637E-02,5.E-02) + ); +#96891 = CARTESIAN_POINT('',(-0.359894266315,-8.758780449734E-02,6.E-02) + ); +#96892 = CARTESIAN_POINT('',(-0.359894266315,-8.758780449734E-02,5.E-02) + ); +#96893 = CARTESIAN_POINT('',(-0.344082469326,-9.203580592234E-02,6.E-02) + ); +#96894 = CARTESIAN_POINT('',(-0.344082469326,-9.203580592234E-02,5.E-02) + ); +#96895 = CARTESIAN_POINT('',(-0.328928892834,-9.762283647603E-02,6.E-02) + ); +#96896 = CARTESIAN_POINT('',(-0.328928892834,-9.762283647603E-02,5.E-02) + ); +#96897 = CARTESIAN_POINT('',(-0.314271613607,-0.104004380669,6.E-02)); +#96898 = CARTESIAN_POINT('',(-0.314271613607,-0.104004380669,5.E-02)); +#96899 = CARTESIAN_POINT('',(-0.305039757989,-0.109204197468,6.E-02)); +#96900 = CARTESIAN_POINT('',(-0.305039757989,-0.109204197468,5.E-02)); +#96901 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,6.E-02)); +#96902 = CARTESIAN_POINT('',(-0.300443592925,-0.111792974557,5.E-02)); +#96903 = ADVANCED_FACE('',(#96904),#96916,.T.); +#96904 = FACE_BOUND('',#96905,.T.); +#96905 = EDGE_LOOP('',(#96906,#96907,#96908,#96909,#96910,#96911,#96912, + #96913,#96914,#96915)); +#96906 = ORIENTED_EDGE('',*,*,#96372,.F.); +#96907 = ORIENTED_EDGE('',*,*,#96866,.F.); +#96908 = ORIENTED_EDGE('',*,*,#96792,.F.); +#96909 = ORIENTED_EDGE('',*,*,#96718,.F.); +#96910 = ORIENTED_EDGE('',*,*,#96668,.F.); +#96911 = ORIENTED_EDGE('',*,*,#96644,.F.); +#96912 = ORIENTED_EDGE('',*,*,#96594,.F.); +#96913 = ORIENTED_EDGE('',*,*,#96520,.F.); +#96914 = ORIENTED_EDGE('',*,*,#96446,.F.); +#96915 = ORIENTED_EDGE('',*,*,#96396,.F.); +#96916 = PLANE('',#96917); +#96917 = AXIS2_PLACEMENT_3D('',#96918,#96919,#96920); +#96918 = CARTESIAN_POINT('',(-0.367037614719,-3.183906387776E-02,6.E-02) + ); +#96919 = DIRECTION('',(-1.079483135452E-14,-2.217399342095E-14,-1.)); +#96920 = DIRECTION('',(1.566229073599E-44,1.,-2.217399342095E-14)); +#96921 = ADVANCED_FACE('',(#96922),#96947,.T.); +#96922 = FACE_BOUND('',#96923,.T.); +#96923 = EDGE_LOOP('',(#96924,#96925,#96933,#96941)); +#96924 = ORIENTED_EDGE('',*,*,#80183,.F.); +#96925 = ORIENTED_EDGE('',*,*,#96926,.F.); +#96926 = EDGE_CURVE('',#96927,#80176,#96929,.T.); +#96927 = VERTEX_POINT('',#96928); +#96928 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,6.E-02) + ); +#96929 = LINE('',#96930,#96931); +#96930 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,6.E-02) + ); +#96931 = VECTOR('',#96932,1.); +#96932 = DIRECTION('',(-0.,-0.,-1.)); +#96933 = ORIENTED_EDGE('',*,*,#96934,.T.); +#96934 = EDGE_CURVE('',#96927,#96935,#96937,.T.); +#96935 = VERTEX_POINT('',#96936); +#96936 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,6.E-02) + ); +#96937 = LINE('',#96938,#96939); +#96938 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,6.E-02) + ); +#96939 = VECTOR('',#96940,1.); +#96940 = DIRECTION('',(0.,1.,0.)); +#96941 = ORIENTED_EDGE('',*,*,#96942,.T.); +#96942 = EDGE_CURVE('',#96935,#80184,#96943,.T.); +#96943 = LINE('',#96944,#96945); +#96944 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,6.E-02) + ); +#96945 = VECTOR('',#96946,1.); +#96946 = DIRECTION('',(-0.,-0.,-1.)); +#96947 = PLANE('',#96948); +#96948 = AXIS2_PLACEMENT_3D('',#96949,#96950,#96951); +#96949 = CARTESIAN_POINT('',(-0.715077739266,-8.58783404107E-02,6.E-02) + ); +#96950 = DIRECTION('',(-1.,0.,0.)); +#96951 = DIRECTION('',(0.,0.,1.)); +#96952 = ADVANCED_FACE('',(#96953),#96971,.T.); +#96953 = FACE_BOUND('',#96954,.T.); +#96954 = EDGE_LOOP('',(#96955,#96956,#96957,#96965)); +#96955 = ORIENTED_EDGE('',*,*,#80191,.F.); +#96956 = ORIENTED_EDGE('',*,*,#96942,.F.); +#96957 = ORIENTED_EDGE('',*,*,#96958,.T.); +#96958 = EDGE_CURVE('',#96935,#96959,#96961,.T.); +#96959 = VERTEX_POINT('',#96960); +#96960 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,6.E-02) + ); +#96961 = LINE('',#96962,#96963); +#96962 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,6.E-02) + ); +#96963 = VECTOR('',#96964,1.); +#96964 = DIRECTION('',(-1.,0.,0.)); +#96965 = ORIENTED_EDGE('',*,*,#96966,.T.); +#96966 = EDGE_CURVE('',#96959,#80192,#96967,.T.); +#96967 = LINE('',#96968,#96969); +#96968 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,6.E-02) + ); +#96969 = VECTOR('',#96970,1.); +#96970 = DIRECTION('',(-0.,-0.,-1.)); +#96971 = PLANE('',#96972); +#96972 = AXIS2_PLACEMENT_3D('',#96973,#96974,#96975); +#96973 = CARTESIAN_POINT('',(-0.715077739266,-3.100029163022E-02,6.E-02) + ); +#96974 = DIRECTION('',(0.,-1.,0.)); +#96975 = DIRECTION('',(0.,-0.,-1.)); +#96976 = ADVANCED_FACE('',(#96977),#96995,.T.); +#96977 = FACE_BOUND('',#96978,.T.); +#96978 = EDGE_LOOP('',(#96979,#96980,#96981,#96989)); +#96979 = ORIENTED_EDGE('',*,*,#80199,.F.); +#96980 = ORIENTED_EDGE('',*,*,#96966,.F.); +#96981 = ORIENTED_EDGE('',*,*,#96982,.T.); +#96982 = EDGE_CURVE('',#96959,#96983,#96985,.T.); +#96983 = VERTEX_POINT('',#96984); +#96984 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,6.E-02)); +#96985 = LINE('',#96986,#96987); +#96986 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,6.E-02) + ); +#96987 = VECTOR('',#96988,1.); +#96988 = DIRECTION('',(0.,-1.,0.)); +#96989 = ORIENTED_EDGE('',*,*,#96990,.T.); +#96990 = EDGE_CURVE('',#96983,#80200,#96991,.T.); +#96991 = LINE('',#96992,#96993); +#96992 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,6.E-02)); +#96993 = VECTOR('',#96994,1.); +#96994 = DIRECTION('',(-0.,-0.,-1.)); +#96995 = PLANE('',#96996); +#96996 = AXIS2_PLACEMENT_3D('',#96997,#96998,#96999); +#96997 = CARTESIAN_POINT('',(-0.971175300242,-3.100029163022E-02,6.E-02) + ); +#96998 = DIRECTION('',(1.,0.,-0.)); +#96999 = DIRECTION('',(-0.,0.,-1.)); +#97000 = ADVANCED_FACE('',(#97001),#97019,.T.); +#97001 = FACE_BOUND('',#97002,.T.); +#97002 = EDGE_LOOP('',(#97003,#97004,#97005,#97013)); +#97003 = ORIENTED_EDGE('',*,*,#80207,.F.); +#97004 = ORIENTED_EDGE('',*,*,#96990,.F.); +#97005 = ORIENTED_EDGE('',*,*,#97006,.T.); +#97006 = EDGE_CURVE('',#96983,#97007,#97009,.T.); +#97007 = VERTEX_POINT('',#97008); +#97008 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,6.E-02)); +#97009 = LINE('',#97010,#97011); +#97010 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,6.E-02)); +#97011 = VECTOR('',#97012,1.); +#97012 = DIRECTION('',(1.,0.,0.)); +#97013 = ORIENTED_EDGE('',*,*,#97014,.T.); +#97014 = EDGE_CURVE('',#97007,#80208,#97015,.T.); +#97015 = LINE('',#97016,#97017); +#97016 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,6.E-02)); +#97017 = VECTOR('',#97018,1.); +#97018 = DIRECTION('',(-0.,-0.,-1.)); +#97019 = PLANE('',#97020); +#97020 = AXIS2_PLACEMENT_3D('',#97021,#97022,#97023); +#97021 = CARTESIAN_POINT('',(-0.971175300242,-0.53100029163,6.E-02)); +#97022 = DIRECTION('',(0.,1.,0.)); +#97023 = DIRECTION('',(0.,-0.,1.)); +#97024 = ADVANCED_FACE('',(#97025),#97043,.T.); +#97025 = FACE_BOUND('',#97026,.T.); +#97026 = EDGE_LOOP('',(#97027,#97028,#97029,#97037)); +#97027 = ORIENTED_EDGE('',*,*,#80215,.F.); +#97028 = ORIENTED_EDGE('',*,*,#97014,.F.); +#97029 = ORIENTED_EDGE('',*,*,#97030,.T.); +#97030 = EDGE_CURVE('',#97007,#97031,#97033,.T.); +#97031 = VERTEX_POINT('',#97032); +#97032 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,6.E-02)); +#97033 = LINE('',#97034,#97035); +#97034 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,6.E-02)); +#97035 = VECTOR('',#97036,1.); +#97036 = DIRECTION('',(0.,1.,0.)); +#97037 = ORIENTED_EDGE('',*,*,#97038,.T.); +#97038 = EDGE_CURVE('',#97031,#80174,#97039,.T.); +#97039 = LINE('',#97040,#97041); +#97040 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,6.E-02)); +#97041 = VECTOR('',#97042,1.); +#97042 = DIRECTION('',(-0.,-0.,-1.)); +#97043 = PLANE('',#97044); +#97044 = AXIS2_PLACEMENT_3D('',#97045,#97046,#97047); +#97045 = CARTESIAN_POINT('',(-0.90410212951,-0.53100029163,6.E-02)); +#97046 = DIRECTION('',(-1.,0.,0.)); +#97047 = DIRECTION('',(0.,0.,1.)); +#97048 = ADVANCED_FACE('',(#97049),#97060,.T.); +#97049 = FACE_BOUND('',#97050,.T.); +#97050 = EDGE_LOOP('',(#97051,#97052,#97053,#97059)); +#97051 = ORIENTED_EDGE('',*,*,#80173,.F.); +#97052 = ORIENTED_EDGE('',*,*,#97038,.F.); +#97053 = ORIENTED_EDGE('',*,*,#97054,.T.); +#97054 = EDGE_CURVE('',#97031,#96927,#97055,.T.); +#97055 = LINE('',#97056,#97057); +#97056 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,6.E-02)); +#97057 = VECTOR('',#97058,1.); +#97058 = DIRECTION('',(1.,0.,0.)); +#97059 = ORIENTED_EDGE('',*,*,#96926,.T.); +#97060 = PLANE('',#97061); +#97061 = AXIS2_PLACEMENT_3D('',#97062,#97063,#97064); +#97062 = CARTESIAN_POINT('',(-0.90410212951,-8.58783404107E-02,6.E-02)); +#97063 = DIRECTION('',(0.,1.,0.)); +#97064 = DIRECTION('',(0.,-0.,1.)); +#97065 = ADVANCED_FACE('',(#97066),#97074,.F.); +#97066 = FACE_BOUND('',#97067,.T.); +#97067 = EDGE_LOOP('',(#97068,#97069,#97070,#97071,#97072,#97073)); +#97068 = ORIENTED_EDGE('',*,*,#96934,.F.); +#97069 = ORIENTED_EDGE('',*,*,#97054,.F.); +#97070 = ORIENTED_EDGE('',*,*,#97030,.F.); +#97071 = ORIENTED_EDGE('',*,*,#97006,.F.); +#97072 = ORIENTED_EDGE('',*,*,#96982,.F.); +#97073 = ORIENTED_EDGE('',*,*,#96958,.F.); +#97074 = PLANE('',#97075); +#97075 = AXIS2_PLACEMENT_3D('',#97076,#97077,#97078); +#97076 = CARTESIAN_POINT('',(0.,0.,6.E-02)); +#97077 = DIRECTION('',(0.,-0.,1.)); +#97078 = DIRECTION('',(1.,0.,0.)); +#97079 = ADVANCED_FACE('',(#97080),#97088,.T.); +#97080 = FACE_BOUND('',#97081,.T.); +#97081 = EDGE_LOOP('',(#97082,#97083,#97084,#97085,#97086,#97087)); +#97082 = ORIENTED_EDGE('',*,*,#95387,.T.); +#97083 = ORIENTED_EDGE('',*,*,#95356,.T.); +#97084 = ORIENTED_EDGE('',*,*,#95511,.T.); +#97085 = ORIENTED_EDGE('',*,*,#95473,.T.); +#97086 = ORIENTED_EDGE('',*,*,#95449,.T.); +#97087 = ORIENTED_EDGE('',*,*,#95411,.T.); +#97088 = PLANE('',#97089); +#97089 = AXIS2_PLACEMENT_3D('',#97090,#97091,#97092); +#97090 = CARTESIAN_POINT('',(0.,0.,5.E-02)); +#97091 = DIRECTION('',(0.,0.,-1.)); +#97092 = DIRECTION('',(-1.,0.,-0.)); +#97093 = ADVANCED_FACE('',(#97094),#97101,.T.); +#97094 = FACE_BOUND('',#97095,.T.); +#97095 = EDGE_LOOP('',(#97096,#97097,#97098,#97099,#97100)); +#97096 = ORIENTED_EDGE('',*,*,#95866,.T.); +#97097 = ORIENTED_EDGE('',*,*,#95835,.T.); +#97098 = ORIENTED_EDGE('',*,*,#96038,.T.); +#97099 = ORIENTED_EDGE('',*,*,#96014,.T.); +#97100 = ORIENTED_EDGE('',*,*,#95940,.T.); +#97101 = PLANE('',#97102); +#97102 = AXIS2_PLACEMENT_3D('',#97103,#97104,#97105); +#97103 = CARTESIAN_POINT('',(0.,0.,5.E-02)); +#97104 = DIRECTION('',(0.,0.,-1.)); +#97105 = DIRECTION('',(-1.,0.,-0.)); +#97106 = MANIFOLD_SOLID_BREP('',#97107); +#97107 = CLOSED_SHELL('',(#97108,#97148,#97179,#97210,#97241,#97272, + #97294,#97308)); +#97108 = ADVANCED_FACE('',(#97109),#97143,.F.); +#97109 = FACE_BOUND('',#97110,.T.); +#97110 = EDGE_LOOP('',(#97111,#97121,#97129,#97137)); +#97111 = ORIENTED_EDGE('',*,*,#97112,.T.); +#97112 = EDGE_CURVE('',#97113,#97115,#97117,.T.); +#97113 = VERTEX_POINT('',#97114); +#97114 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.25)); +#97115 = VERTEX_POINT('',#97116); +#97116 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.25)); +#97117 = LINE('',#97118,#97119); +#97118 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.25)); +#97119 = VECTOR('',#97120,1.); +#97120 = DIRECTION('',(6.234647602587E-15,-1.,-0.)); +#97121 = ORIENTED_EDGE('',*,*,#97122,.F.); +#97122 = EDGE_CURVE('',#97123,#97115,#97125,.T.); +#97123 = VERTEX_POINT('',#97124); +#97124 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.251)); +#97125 = LINE('',#97126,#97127); +#97126 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.251)); +#97127 = VECTOR('',#97128,1.); +#97128 = DIRECTION('',(-0.,-0.,-1.)); +#97129 = ORIENTED_EDGE('',*,*,#97130,.F.); +#97130 = EDGE_CURVE('',#97131,#97123,#97133,.T.); +#97131 = VERTEX_POINT('',#97132); +#97132 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.251)); +#97133 = LINE('',#97134,#97135); +#97134 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.251)); +#97135 = VECTOR('',#97136,1.); +#97136 = DIRECTION('',(6.234647602587E-15,-1.,-0.)); +#97137 = ORIENTED_EDGE('',*,*,#97138,.T.); +#97138 = EDGE_CURVE('',#97131,#97113,#97139,.T.); +#97139 = LINE('',#97140,#97141); +#97140 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.251)); +#97141 = VECTOR('',#97142,1.); +#97142 = DIRECTION('',(-0.,-0.,-1.)); +#97143 = PLANE('',#97144); +#97144 = AXIS2_PLACEMENT_3D('',#97145,#97146,#97147); +#97145 = CARTESIAN_POINT('',(-0.302063233157,1.108180078762,3.251)); +#97146 = DIRECTION('',(1.,6.234647602587E-15,-0.)); +#97147 = DIRECTION('',(-6.234647602587E-15,1.,0.)); +#97148 = ADVANCED_FACE('',(#97149),#97174,.F.); +#97149 = FACE_BOUND('',#97150,.T.); +#97150 = EDGE_LOOP('',(#97151,#97159,#97167,#97173)); +#97151 = ORIENTED_EDGE('',*,*,#97152,.T.); +#97152 = EDGE_CURVE('',#97115,#97153,#97155,.T.); +#97153 = VERTEX_POINT('',#97154); +#97154 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.25)); +#97155 = LINE('',#97156,#97157); +#97156 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.25)); +#97157 = VECTOR('',#97158,1.); +#97158 = DIRECTION('',(1.,7.139031657828E-15,-0.)); +#97159 = ORIENTED_EDGE('',*,*,#97160,.F.); +#97160 = EDGE_CURVE('',#97161,#97153,#97163,.T.); +#97161 = VERTEX_POINT('',#97162); +#97162 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.251)); +#97163 = LINE('',#97164,#97165); +#97164 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.251)); +#97165 = VECTOR('',#97166,1.); +#97166 = DIRECTION('',(-0.,-0.,-1.)); +#97167 = ORIENTED_EDGE('',*,*,#97168,.F.); +#97168 = EDGE_CURVE('',#97123,#97161,#97169,.T.); +#97169 = LINE('',#97170,#97171); +#97170 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.251)); +#97171 = VECTOR('',#97172,1.); +#97172 = DIRECTION('',(1.,7.139031657828E-15,-0.)); +#97173 = ORIENTED_EDGE('',*,*,#97122,.T.); +#97174 = PLANE('',#97175); +#97175 = AXIS2_PLACEMENT_3D('',#97176,#97177,#97178); +#97176 = CARTESIAN_POINT('',(-0.180567520635,1.108180078762,3.251)); +#97177 = DIRECTION('',(-7.139031657828E-15,1.,0.)); +#97178 = DIRECTION('',(-1.,-7.139031657828E-15,0.)); +#97179 = ADVANCED_FACE('',(#97180),#97205,.F.); +#97180 = FACE_BOUND('',#97181,.T.); +#97181 = EDGE_LOOP('',(#97182,#97190,#97198,#97204)); +#97182 = ORIENTED_EDGE('',*,*,#97183,.T.); +#97183 = EDGE_CURVE('',#97153,#97184,#97186,.T.); +#97184 = VERTEX_POINT('',#97185); +#97185 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.25)); +#97186 = LINE('',#97187,#97188); +#97187 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.25)); +#97188 = VECTOR('',#97189,1.); +#97189 = DIRECTION('',(7.220391078106E-15,-1.,-0.)); +#97190 = ORIENTED_EDGE('',*,*,#97191,.F.); +#97191 = EDGE_CURVE('',#97192,#97184,#97194,.T.); +#97192 = VERTEX_POINT('',#97193); +#97193 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.251)); +#97194 = LINE('',#97195,#97196); +#97195 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.251)); +#97196 = VECTOR('',#97197,1.); +#97197 = DIRECTION('',(-0.,-0.,-1.)); +#97198 = ORIENTED_EDGE('',*,*,#97199,.F.); +#97199 = EDGE_CURVE('',#97161,#97192,#97200,.T.); +#97200 = LINE('',#97201,#97202); +#97201 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.251)); +#97202 = VECTOR('',#97203,1.); +#97203 = DIRECTION('',(7.220391078106E-15,-1.,-0.)); +#97204 = ORIENTED_EDGE('',*,*,#97160,.T.); +#97205 = PLANE('',#97206); +#97206 = AXIS2_PLACEMENT_3D('',#97207,#97208,#97209); +#97207 = CARTESIAN_POINT('',(-0.180567520635,0.837895008415,3.251)); +#97208 = DIRECTION('',(1.,7.220391078106E-15,-0.)); +#97209 = DIRECTION('',(-7.220391078106E-15,1.,0.)); +#97210 = ADVANCED_FACE('',(#97211),#97236,.F.); +#97211 = FACE_BOUND('',#97212,.T.); +#97212 = EDGE_LOOP('',(#97213,#97221,#97229,#97235)); +#97213 = ORIENTED_EDGE('',*,*,#97214,.T.); +#97214 = EDGE_CURVE('',#97184,#97215,#97217,.T.); +#97215 = VERTEX_POINT('',#97216); +#97216 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.25)); +#97217 = LINE('',#97218,#97219); +#97218 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.25)); +#97219 = VECTOR('',#97220,1.); +#97220 = DIRECTION('',(1.,8.259364843827E-15,-0.)); +#97221 = ORIENTED_EDGE('',*,*,#97222,.F.); +#97222 = EDGE_CURVE('',#97223,#97215,#97225,.T.); +#97223 = VERTEX_POINT('',#97224); +#97224 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.251)); +#97225 = LINE('',#97226,#97227); +#97226 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.251)); +#97227 = VECTOR('',#97228,1.); +#97228 = DIRECTION('',(-0.,-0.,-1.)); +#97229 = ORIENTED_EDGE('',*,*,#97230,.F.); +#97230 = EDGE_CURVE('',#97192,#97223,#97231,.T.); +#97231 = LINE('',#97232,#97233); +#97232 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.251)); +#97233 = VECTOR('',#97234,1.); +#97234 = DIRECTION('',(1.,8.259364843827E-15,-0.)); +#97235 = ORIENTED_EDGE('',*,*,#97191,.T.); +#97236 = PLANE('',#97237); +#97237 = AXIS2_PLACEMENT_3D('',#97238,#97239,#97240); +#97238 = CARTESIAN_POINT('',(-0.141186689555,0.837895008415,3.251)); +#97239 = DIRECTION('',(-8.259364843827E-15,1.,0.)); +#97240 = DIRECTION('',(-1.,-8.259364843827E-15,0.)); +#97241 = ADVANCED_FACE('',(#97242),#97267,.F.); +#97242 = FACE_BOUND('',#97243,.T.); +#97243 = EDGE_LOOP('',(#97244,#97252,#97260,#97266)); +#97244 = ORIENTED_EDGE('',*,*,#97245,.T.); +#97245 = EDGE_CURVE('',#97215,#97246,#97248,.T.); +#97246 = VERTEX_POINT('',#97247); +#97247 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.25)); +#97248 = LINE('',#97249,#97250); +#97249 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.25)); +#97250 = VECTOR('',#97251,1.); +#97251 = DIRECTION('',(-7.818809084411E-15,1.,-0.)); +#97252 = ORIENTED_EDGE('',*,*,#97253,.F.); +#97253 = EDGE_CURVE('',#97254,#97246,#97256,.T.); +#97254 = VERTEX_POINT('',#97255); +#97255 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.251)); +#97256 = LINE('',#97257,#97258); +#97257 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.251)); +#97258 = VECTOR('',#97259,1.); +#97259 = DIRECTION('',(-0.,-0.,-1.)); +#97260 = ORIENTED_EDGE('',*,*,#97261,.F.); +#97261 = EDGE_CURVE('',#97223,#97254,#97262,.T.); +#97262 = LINE('',#97263,#97264); +#97263 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.251)); +#97264 = VECTOR('',#97265,1.); +#97265 = DIRECTION('',(-7.818809084411E-15,1.,-0.)); +#97266 = ORIENTED_EDGE('',*,*,#97222,.T.); +#97267 = PLANE('',#97268); +#97268 = AXIS2_PLACEMENT_3D('',#97269,#97270,#97271); +#97269 = CARTESIAN_POINT('',(-0.141186689555,1.142959981062,3.251)); +#97270 = DIRECTION('',(-1.,-7.818809084411E-15,0.)); +#97271 = DIRECTION('',(7.818809084411E-15,-1.,0.)); +#97272 = ADVANCED_FACE('',(#97273),#97289,.F.); +#97273 = FACE_BOUND('',#97274,.T.); +#97274 = EDGE_LOOP('',(#97275,#97281,#97282,#97288)); +#97275 = ORIENTED_EDGE('',*,*,#97276,.T.); +#97276 = EDGE_CURVE('',#97246,#97113,#97277,.T.); +#97277 = LINE('',#97278,#97279); +#97278 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.25)); +#97279 = VECTOR('',#97280,1.); +#97280 = DIRECTION('',(-1.,-6.739342779281E-15,-0.)); +#97281 = ORIENTED_EDGE('',*,*,#97138,.F.); +#97282 = ORIENTED_EDGE('',*,*,#97283,.F.); +#97283 = EDGE_CURVE('',#97254,#97131,#97284,.T.); +#97284 = LINE('',#97285,#97286); +#97285 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.251)); +#97286 = VECTOR('',#97287,1.); +#97287 = DIRECTION('',(-1.,-6.739342779281E-15,-0.)); +#97288 = ORIENTED_EDGE('',*,*,#97253,.T.); +#97289 = PLANE('',#97290); +#97290 = AXIS2_PLACEMENT_3D('',#97291,#97292,#97293); +#97291 = CARTESIAN_POINT('',(-0.302063233157,1.142959981062,3.251)); +#97292 = DIRECTION('',(6.739342779281E-15,-1.,0.)); +#97293 = DIRECTION('',(1.,6.739342779281E-15,0.)); +#97294 = ADVANCED_FACE('',(#97295),#97303,.F.); +#97295 = FACE_BOUND('',#97296,.T.); +#97296 = EDGE_LOOP('',(#97297,#97298,#97299,#97300,#97301,#97302)); +#97297 = ORIENTED_EDGE('',*,*,#97130,.T.); +#97298 = ORIENTED_EDGE('',*,*,#97168,.T.); +#97299 = ORIENTED_EDGE('',*,*,#97199,.T.); +#97300 = ORIENTED_EDGE('',*,*,#97230,.T.); +#97301 = ORIENTED_EDGE('',*,*,#97261,.T.); +#97302 = ORIENTED_EDGE('',*,*,#97283,.T.); +#97303 = PLANE('',#97304); +#97304 = AXIS2_PLACEMENT_3D('',#97305,#97306,#97307); +#97305 = CARTESIAN_POINT('',(0.,0.,3.251)); +#97306 = DIRECTION('',(0.,0.,-1.)); +#97307 = DIRECTION('',(-1.,0.,-0.)); +#97308 = ADVANCED_FACE('',(#97309),#97317,.T.); +#97309 = FACE_BOUND('',#97310,.T.); +#97310 = EDGE_LOOP('',(#97311,#97312,#97313,#97314,#97315,#97316)); +#97311 = ORIENTED_EDGE('',*,*,#97112,.F.); +#97312 = ORIENTED_EDGE('',*,*,#97276,.F.); +#97313 = ORIENTED_EDGE('',*,*,#97245,.F.); +#97314 = ORIENTED_EDGE('',*,*,#97214,.F.); +#97315 = ORIENTED_EDGE('',*,*,#97183,.F.); +#97316 = ORIENTED_EDGE('',*,*,#97152,.F.); +#97317 = PLANE('',#97318); +#97318 = AXIS2_PLACEMENT_3D('',#97319,#97320,#97321); +#97319 = CARTESIAN_POINT('',(0.,0.,3.25)); +#97320 = DIRECTION('',(0.,0.,-1.)); +#97321 = DIRECTION('',(-1.,0.,-0.)); +#97322 = MANIFOLD_SOLID_BREP('',#97323); +#97323 = CLOSED_SHELL('',(#97324,#97370,#97401,#97438,#97475,#97512, + #97549,#97586,#97623,#97654,#97691,#97728,#97765,#97802,#97830, + #97852)); +#97324 = ADVANCED_FACE('',(#97325),#97361,.F.); +#97325 = FACE_BOUND('',#97326,.F.); +#97326 = EDGE_LOOP('',(#97327,#97337,#97346,#97354)); +#97327 = ORIENTED_EDGE('',*,*,#97328,.F.); +#97328 = EDGE_CURVE('',#97329,#97331,#97333,.T.); +#97329 = VERTEX_POINT('',#97330); +#97330 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97331 = VERTEX_POINT('',#97332); +#97332 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.25)); +#97333 = LINE('',#97334,#97335); +#97334 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97335 = VECTOR('',#97336,1.); +#97336 = DIRECTION('',(-0.,-0.,-1.)); +#97337 = ORIENTED_EDGE('',*,*,#97338,.T.); +#97338 = EDGE_CURVE('',#97329,#97339,#97341,.T.); +#97339 = VERTEX_POINT('',#97340); +#97340 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.251)); +#97341 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97342,#97343,#97344,#97345), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#97342 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97343 = CARTESIAN_POINT('',(-0.492338931843,1.148106782748,3.251)); +#97344 = CARTESIAN_POINT('',(-0.520490377427,1.142180162626,3.251)); +#97345 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.251)); +#97346 = ORIENTED_EDGE('',*,*,#97347,.T.); +#97347 = EDGE_CURVE('',#97339,#97348,#97350,.T.); +#97348 = VERTEX_POINT('',#97349); +#97349 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.25)); +#97350 = LINE('',#97351,#97352); +#97351 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.251)); +#97352 = VECTOR('',#97353,1.); +#97353 = DIRECTION('',(-0.,-0.,-1.)); +#97354 = ORIENTED_EDGE('',*,*,#97355,.F.); +#97355 = EDGE_CURVE('',#97331,#97348,#97356,.T.); +#97356 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97357,#97358,#97359,#97360), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#97357 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.25)); +#97358 = CARTESIAN_POINT('',(-0.492338931843,1.148106782748,3.25)); +#97359 = CARTESIAN_POINT('',(-0.520490377427,1.142180162626,3.25)); +#97360 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.25)); +#97361 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97362,#97363) + ,(#97364,#97365) + ,(#97366,#97367) + ,(#97368,#97369 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97362 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97363 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.25)); +#97364 = CARTESIAN_POINT('',(-0.492338931843,1.148106782748,3.251)); +#97365 = CARTESIAN_POINT('',(-0.492338931843,1.148106782748,3.25)); +#97366 = CARTESIAN_POINT('',(-0.520490377427,1.142180162626,3.251)); +#97367 = CARTESIAN_POINT('',(-0.520490377427,1.142180162626,3.25)); +#97368 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.251)); +#97369 = CARTESIAN_POINT('',(-0.54294914842,1.130326922379,3.25)); +#97370 = ADVANCED_FACE('',(#97371),#97396,.F.); +#97371 = FACE_BOUND('',#97372,.T.); +#97372 = EDGE_LOOP('',(#97373,#97381,#97389,#97395)); +#97373 = ORIENTED_EDGE('',*,*,#97374,.T.); +#97374 = EDGE_CURVE('',#97348,#97375,#97377,.T.); +#97375 = VERTEX_POINT('',#97376); +#97376 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.25)); +#97377 = LINE('',#97378,#97379); +#97378 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.25)); +#97379 = VECTOR('',#97380,1.); +#97380 = DIRECTION('',(1.149030095329E-14,-1.,-0.)); +#97381 = ORIENTED_EDGE('',*,*,#97382,.F.); +#97382 = EDGE_CURVE('',#97383,#97375,#97385,.T.); +#97383 = VERTEX_POINT('',#97384); +#97384 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97385 = LINE('',#97386,#97387); +#97386 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97387 = VECTOR('',#97388,1.); +#97388 = DIRECTION('',(-0.,-0.,-1.)); +#97389 = ORIENTED_EDGE('',*,*,#97390,.F.); +#97390 = EDGE_CURVE('',#97339,#97383,#97391,.T.); +#97391 = LINE('',#97392,#97393); +#97392 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97393 = VECTOR('',#97394,1.); +#97394 = DIRECTION('',(1.149030095329E-14,-1.,-0.)); +#97395 = ORIENTED_EDGE('',*,*,#97347,.T.); +#97396 = PLANE('',#97397); +#97397 = AXIS2_PLACEMENT_3D('',#97398,#97399,#97400); +#97398 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97399 = DIRECTION('',(1.,1.149030095329E-14,-0.)); +#97400 = DIRECTION('',(-1.149030095329E-14,1.,0.)); +#97401 = ADVANCED_FACE('',(#97402),#97429,.F.); +#97402 = FACE_BOUND('',#97403,.F.); +#97403 = EDGE_LOOP('',(#97404,#97405,#97414,#97422)); +#97404 = ORIENTED_EDGE('',*,*,#97382,.F.); +#97405 = ORIENTED_EDGE('',*,*,#97406,.T.); +#97406 = EDGE_CURVE('',#97383,#97407,#97409,.T.); +#97407 = VERTEX_POINT('',#97408); +#97408 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97409 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97410,#97411,#97412,#97413), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#97410 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97411 = CARTESIAN_POINT('',(-0.520646341114,1.106152550825,3.251)); +#97412 = CARTESIAN_POINT('',(-0.494366459779,1.113014953073,3.251)); +#97413 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97414 = ORIENTED_EDGE('',*,*,#97415,.T.); +#97415 = EDGE_CURVE('',#97407,#97416,#97418,.T.); +#97416 = VERTEX_POINT('',#97417); +#97417 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.25)); +#97418 = LINE('',#97419,#97420); +#97419 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97420 = VECTOR('',#97421,1.); +#97421 = DIRECTION('',(-0.,-0.,-1.)); +#97422 = ORIENTED_EDGE('',*,*,#97423,.F.); +#97423 = EDGE_CURVE('',#97375,#97416,#97424,.T.); +#97424 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97425,#97426,#97427,#97428), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#97425 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.25)); +#97426 = CARTESIAN_POINT('',(-0.520646341114,1.106152550825,3.25)); +#97427 = CARTESIAN_POINT('',(-0.494366459779,1.113014953073,3.25)); +#97428 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.25)); +#97429 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97430,#97431) + ,(#97432,#97433) + ,(#97434,#97435) + ,(#97436,#97437 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97430 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.251)); +#97431 = CARTESIAN_POINT('',(-0.54294914842,1.092583710016,3.25)); +#97432 = CARTESIAN_POINT('',(-0.520646341114,1.106152550825,3.251)); +#97433 = CARTESIAN_POINT('',(-0.520646341114,1.106152550825,3.25)); +#97434 = CARTESIAN_POINT('',(-0.494366459779,1.113014953073,3.251)); +#97435 = CARTESIAN_POINT('',(-0.494366459779,1.113014953073,3.25)); +#97436 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97437 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.25)); +#97438 = ADVANCED_FACE('',(#97439),#97466,.F.); +#97439 = FACE_BOUND('',#97440,.F.); +#97440 = EDGE_LOOP('',(#97441,#97442,#97451,#97459)); +#97441 = ORIENTED_EDGE('',*,*,#97415,.F.); +#97442 = ORIENTED_EDGE('',*,*,#97443,.T.); +#97443 = EDGE_CURVE('',#97407,#97444,#97446,.T.); +#97444 = VERTEX_POINT('',#97445); +#97445 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97446 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97447,#97448,#97449,#97450), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#97447 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97448 = CARTESIAN_POINT('',(-0.431903002957,1.113014953073,3.251)); +#97449 = CARTESIAN_POINT('',(-0.405779085309,1.102253458639,3.251)); +#97450 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97451 = ORIENTED_EDGE('',*,*,#97452,.T.); +#97452 = EDGE_CURVE('',#97444,#97453,#97455,.T.); +#97453 = VERTEX_POINT('',#97454); +#97454 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.25)); +#97455 = LINE('',#97456,#97457); +#97456 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97457 = VECTOR('',#97458,1.); +#97458 = DIRECTION('',(-0.,-0.,-1.)); +#97459 = ORIENTED_EDGE('',*,*,#97460,.F.); +#97460 = EDGE_CURVE('',#97416,#97453,#97461,.T.); +#97461 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97462,#97463,#97464,#97465), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#97462 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.25)); +#97463 = CARTESIAN_POINT('',(-0.431903002957,1.113014953073,3.25)); +#97464 = CARTESIAN_POINT('',(-0.405779085309,1.102253458639,3.25)); +#97465 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.25)); +#97466 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97467,#97468) + ,(#97469,#97470) + ,(#97471,#97472) + ,(#97473,#97474 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97467 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.251)); +#97468 = CARTESIAN_POINT('',(-0.464187486258,1.113014953073,3.25)); +#97469 = CARTESIAN_POINT('',(-0.431903002957,1.113014953073,3.251)); +#97470 = CARTESIAN_POINT('',(-0.431903002957,1.113014953073,3.25)); +#97471 = CARTESIAN_POINT('',(-0.405779085309,1.102253458639,3.251)); +#97472 = CARTESIAN_POINT('',(-0.405779085309,1.102253458639,3.25)); +#97473 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97474 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.25)); +#97475 = ADVANCED_FACE('',(#97476),#97503,.F.); +#97476 = FACE_BOUND('',#97477,.F.); +#97477 = EDGE_LOOP('',(#97478,#97479,#97488,#97496)); +#97478 = ORIENTED_EDGE('',*,*,#97452,.F.); +#97479 = ORIENTED_EDGE('',*,*,#97480,.T.); +#97480 = EDGE_CURVE('',#97444,#97481,#97483,.T.); +#97481 = VERTEX_POINT('',#97482); +#97482 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97483 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97484,#97485,#97486,#97487), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#97484 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97485 = CARTESIAN_POINT('',(-0.365852381322,1.05936344459,3.251)); +#97486 = CARTESIAN_POINT('',(-0.355870705327,1.030354198724,3.251)); +#97487 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97488 = ORIENTED_EDGE('',*,*,#97489,.T.); +#97489 = EDGE_CURVE('',#97481,#97490,#97492,.T.); +#97490 = VERTEX_POINT('',#97491); +#97491 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.25)); +#97492 = LINE('',#97493,#97494); +#97493 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97494 = VECTOR('',#97495,1.); +#97495 = DIRECTION('',(-0.,-0.,-1.)); +#97496 = ORIENTED_EDGE('',*,*,#97497,.F.); +#97497 = EDGE_CURVE('',#97453,#97490,#97498,.T.); +#97498 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97499,#97500,#97501,#97502), + .UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.),.PIECEWISE_BEZIER_KNOTS.); +#97499 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.25)); +#97500 = CARTESIAN_POINT('',(-0.365852381322,1.05936344459,3.25)); +#97501 = CARTESIAN_POINT('',(-0.355870705327,1.030354198724,3.25)); +#97502 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.25)); +#97503 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97504,#97505) + ,(#97506,#97507) + ,(#97508,#97509) + ,(#97510,#97511 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97504 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.251)); +#97505 = CARTESIAN_POINT('',(-0.385815733316,1.080886433458,3.25)); +#97506 = CARTESIAN_POINT('',(-0.365852381322,1.05936344459,3.251)); +#97507 = CARTESIAN_POINT('',(-0.365852381322,1.05936344459,3.25)); +#97508 = CARTESIAN_POINT('',(-0.355870705327,1.030354198724,3.251)); +#97509 = CARTESIAN_POINT('',(-0.355870705327,1.030354198724,3.25)); +#97510 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97511 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.25)); +#97512 = ADVANCED_FACE('',(#97513),#97540,.F.); +#97513 = FACE_BOUND('',#97514,.F.); +#97514 = EDGE_LOOP('',(#97515,#97516,#97525,#97533)); +#97515 = ORIENTED_EDGE('',*,*,#97489,.F.); +#97516 = ORIENTED_EDGE('',*,*,#97517,.T.); +#97517 = EDGE_CURVE('',#97481,#97518,#97520,.T.); +#97518 = VERTEX_POINT('',#97519); +#97519 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97520 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97521,#97522,#97523,#97524), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#97521 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97522 = CARTESIAN_POINT('',(-0.355870705327,0.95549162875,3.251)); +#97523 = CARTESIAN_POINT('',(-0.366554217916,0.924922746012,3.251)); +#97524 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97525 = ORIENTED_EDGE('',*,*,#97526,.T.); +#97526 = EDGE_CURVE('',#97518,#97527,#97529,.T.); +#97527 = VERTEX_POINT('',#97528); +#97528 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.25)); +#97529 = LINE('',#97530,#97531); +#97530 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97531 = VECTOR('',#97532,1.); +#97532 = DIRECTION('',(-0.,-0.,-1.)); +#97533 = ORIENTED_EDGE('',*,*,#97534,.F.); +#97534 = EDGE_CURVE('',#97490,#97527,#97535,.T.); +#97535 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97536,#97537,#97538,#97539), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#97536 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.25)); +#97537 = CARTESIAN_POINT('',(-0.355870705327,0.95549162875,3.25)); +#97538 = CARTESIAN_POINT('',(-0.366554217916,0.924922746012,3.25)); +#97539 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.25)); +#97540 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97541,#97542) + ,(#97543,#97544) + ,(#97545,#97546) + ,(#97547,#97548 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97541 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.251)); +#97542 = CARTESIAN_POINT('',(-0.355870705327,0.993858695862,3.25)); +#97543 = CARTESIAN_POINT('',(-0.355870705327,0.95549162875,3.251)); +#97544 = CARTESIAN_POINT('',(-0.355870705327,0.95549162875,3.25)); +#97545 = CARTESIAN_POINT('',(-0.366554217916,0.924922746012,3.251)); +#97546 = CARTESIAN_POINT('',(-0.366554217916,0.924922746012,3.25)); +#97547 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97548 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.25)); +#97549 = ADVANCED_FACE('',(#97550),#97577,.F.); +#97550 = FACE_BOUND('',#97551,.F.); +#97551 = EDGE_LOOP('',(#97552,#97553,#97562,#97570)); +#97552 = ORIENTED_EDGE('',*,*,#97526,.F.); +#97553 = ORIENTED_EDGE('',*,*,#97554,.T.); +#97554 = EDGE_CURVE('',#97518,#97555,#97557,.T.); +#97555 = VERTEX_POINT('',#97556); +#97556 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97557 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97558,#97559,#97560,#97561), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#97558 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97559 = CARTESIAN_POINT('',(-0.409366250121,0.879537312964,3.251)); +#97560 = CARTESIAN_POINT('',(-0.437049804643,0.868307927468,3.251)); +#97561 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97562 = ORIENTED_EDGE('',*,*,#97563,.T.); +#97563 = EDGE_CURVE('',#97555,#97564,#97566,.T.); +#97564 = VERTEX_POINT('',#97565); +#97565 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.25)); +#97566 = LINE('',#97567,#97568); +#97567 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97568 = VECTOR('',#97569,1.); +#97569 = DIRECTION('',(-0.,-0.,-1.)); +#97570 = ORIENTED_EDGE('',*,*,#97571,.F.); +#97571 = EDGE_CURVE('',#97527,#97564,#97572,.T.); +#97572 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97573,#97574,#97575,#97576), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#97573 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.25)); +#97574 = CARTESIAN_POINT('',(-0.409366250121,0.879537312964,3.25)); +#97575 = CARTESIAN_POINT('',(-0.437049804643,0.868307927468,3.25)); +#97576 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.25)); +#97577 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97578,#97579) + ,(#97580,#97581) + ,(#97582,#97583) + ,(#97584,#97585 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97578 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.251)); +#97579 = CARTESIAN_POINT('',(-0.387921243097,0.902152047643,3.25)); +#97580 = CARTESIAN_POINT('',(-0.409366250121,0.879537312964,3.251)); +#97581 = CARTESIAN_POINT('',(-0.409366250121,0.879537312964,3.25)); +#97582 = CARTESIAN_POINT('',(-0.437049804643,0.868307927468,3.251)); +#97583 = CARTESIAN_POINT('',(-0.437049804643,0.868307927468,3.25)); +#97584 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97585 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.25)); +#97586 = ADVANCED_FACE('',(#97587),#97614,.F.); +#97587 = FACE_BOUND('',#97588,.F.); +#97588 = EDGE_LOOP('',(#97589,#97590,#97599,#97607)); +#97589 = ORIENTED_EDGE('',*,*,#97563,.F.); +#97590 = ORIENTED_EDGE('',*,*,#97591,.T.); +#97591 = EDGE_CURVE('',#97555,#97592,#97594,.T.); +#97592 = VERTEX_POINT('',#97593); +#97593 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.251)); +#97594 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97595,#97596,#97597,#97598), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#97595 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97596 = CARTESIAN_POINT('',(-0.497173806153,0.868307927468,3.251)); +#97597 = CARTESIAN_POINT('',(-0.521114232177,0.874234547591,3.251)); +#97598 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.251)); +#97599 = ORIENTED_EDGE('',*,*,#97600,.T.); +#97600 = EDGE_CURVE('',#97592,#97601,#97603,.T.); +#97601 = VERTEX_POINT('',#97602); +#97602 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.25)); +#97603 = LINE('',#97604,#97605); +#97604 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.251)); +#97605 = VECTOR('',#97606,1.); +#97606 = DIRECTION('',(-0.,-0.,-1.)); +#97607 = ORIENTED_EDGE('',*,*,#97608,.F.); +#97608 = EDGE_CURVE('',#97564,#97601,#97609,.T.); +#97609 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97610,#97611,#97612,#97613), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#97610 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.25)); +#97611 = CARTESIAN_POINT('',(-0.497173806153,0.868307927468,3.25)); +#97612 = CARTESIAN_POINT('',(-0.521114232177,0.874234547591,3.25)); +#97613 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.25)); +#97614 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97615,#97616) + ,(#97617,#97618) + ,(#97619,#97620) + ,(#97621,#97622 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97615 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.251)); +#97616 = CARTESIAN_POINT('',(-0.471049888507,0.868307927468,3.25)); +#97617 = CARTESIAN_POINT('',(-0.497173806153,0.868307927468,3.251)); +#97618 = CARTESIAN_POINT('',(-0.497173806153,0.868307927468,3.25)); +#97619 = CARTESIAN_POINT('',(-0.521114232177,0.874234547591,3.251)); +#97620 = CARTESIAN_POINT('',(-0.521114232177,0.874234547591,3.25)); +#97621 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.251)); +#97622 = CARTESIAN_POINT('',(-0.54294914842,0.88639971521,3.25)); +#97623 = ADVANCED_FACE('',(#97624),#97649,.F.); +#97624 = FACE_BOUND('',#97625,.T.); +#97625 = EDGE_LOOP('',(#97626,#97634,#97642,#97648)); +#97626 = ORIENTED_EDGE('',*,*,#97627,.T.); +#97627 = EDGE_CURVE('',#97601,#97628,#97630,.T.); +#97628 = VERTEX_POINT('',#97629); +#97629 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.25)); +#97630 = LINE('',#97631,#97632); +#97631 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.25)); +#97632 = VECTOR('',#97633,1.); +#97633 = DIRECTION('',(1.053277587433E-14,-1.,-0.)); +#97634 = ORIENTED_EDGE('',*,*,#97635,.F.); +#97635 = EDGE_CURVE('',#97636,#97628,#97638,.T.); +#97636 = VERTEX_POINT('',#97637); +#97637 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97638 = LINE('',#97639,#97640); +#97639 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97640 = VECTOR('',#97641,1.); +#97641 = DIRECTION('',(-0.,-0.,-1.)); +#97642 = ORIENTED_EDGE('',*,*,#97643,.F.); +#97643 = EDGE_CURVE('',#97592,#97636,#97644,.T.); +#97644 = LINE('',#97645,#97646); +#97645 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97646 = VECTOR('',#97647,1.); +#97647 = DIRECTION('',(1.053277587433E-14,-1.,-0.)); +#97648 = ORIENTED_EDGE('',*,*,#97600,.T.); +#97649 = PLANE('',#97650); +#97650 = AXIS2_PLACEMENT_3D('',#97651,#97652,#97653); +#97651 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97652 = DIRECTION('',(1.,1.053277587433E-14,-0.)); +#97653 = DIRECTION('',(-1.053277587433E-14,1.,0.)); +#97654 = ADVANCED_FACE('',(#97655),#97682,.F.); +#97655 = FACE_BOUND('',#97656,.F.); +#97656 = EDGE_LOOP('',(#97657,#97658,#97667,#97675)); +#97657 = ORIENTED_EDGE('',*,*,#97635,.F.); +#97658 = ORIENTED_EDGE('',*,*,#97659,.T.); +#97659 = EDGE_CURVE('',#97636,#97660,#97662,.T.); +#97660 = VERTEX_POINT('',#97661); +#97661 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97662 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97663,#97664,#97665,#97666), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#97663 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97664 = CARTESIAN_POINT('',(-0.523921578551,0.836959226289,3.251)); +#97665 = CARTESIAN_POINT('',(-0.49982518884,0.832748206729,3.251)); +#97666 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97667 = ORIENTED_EDGE('',*,*,#97668,.T.); +#97668 = EDGE_CURVE('',#97660,#97669,#97671,.T.); +#97669 = VERTEX_POINT('',#97670); +#97670 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.25)); +#97671 = LINE('',#97672,#97673); +#97672 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97673 = VECTOR('',#97674,1.); +#97674 = DIRECTION('',(-0.,-0.,-1.)); +#97675 = ORIENTED_EDGE('',*,*,#97676,.F.); +#97676 = EDGE_CURVE('',#97628,#97669,#97677,.T.); +#97677 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97678,#97679,#97680,#97681), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#97678 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.25)); +#97679 = CARTESIAN_POINT('',(-0.523921578551,0.836959226289,3.25)); +#97680 = CARTESIAN_POINT('',(-0.49982518884,0.832748206729,3.25)); +#97681 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.25)); +#97682 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97683,#97684) + ,(#97685,#97686) + ,(#97687,#97688) + ,(#97689,#97690 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97683 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.251)); +#97684 = CARTESIAN_POINT('',(-0.54294914842,0.845225301725,3.25)); +#97685 = CARTESIAN_POINT('',(-0.523921578551,0.836959226289,3.251)); +#97686 = CARTESIAN_POINT('',(-0.523921578551,0.836959226289,3.25)); +#97687 = CARTESIAN_POINT('',(-0.49982518884,0.832748206729,3.251)); +#97688 = CARTESIAN_POINT('',(-0.49982518884,0.832748206729,3.25)); +#97689 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97690 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.25)); +#97691 = ADVANCED_FACE('',(#97692),#97719,.F.); +#97692 = FACE_BOUND('',#97693,.F.); +#97693 = EDGE_LOOP('',(#97694,#97695,#97704,#97712)); +#97694 = ORIENTED_EDGE('',*,*,#97668,.F.); +#97695 = ORIENTED_EDGE('',*,*,#97696,.T.); +#97696 = EDGE_CURVE('',#97660,#97697,#97699,.T.); +#97697 = VERTEX_POINT('',#97698); +#97698 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97699 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97700,#97701,#97702,#97703), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#97700 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97701 = CARTESIAN_POINT('',(-0.425352528085,0.832748206729,3.251)); +#97702 = CARTESIAN_POINT('',(-0.387999224941,0.847720720724,3.251)); +#97703 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97704 = ORIENTED_EDGE('',*,*,#97705,.T.); +#97705 = EDGE_CURVE('',#97697,#97706,#97708,.T.); +#97706 = VERTEX_POINT('',#97707); +#97707 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.25)); +#97708 = LINE('',#97709,#97710); +#97709 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97710 = VECTOR('',#97711,1.); +#97711 = DIRECTION('',(-0.,-0.,-1.)); +#97712 = ORIENTED_EDGE('',*,*,#97713,.F.); +#97713 = EDGE_CURVE('',#97669,#97706,#97714,.T.); +#97714 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97715,#97716,#97717,#97718), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#97715 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.25)); +#97716 = CARTESIAN_POINT('',(-0.425352528085,0.832748206729,3.25)); +#97717 = CARTESIAN_POINT('',(-0.387999224941,0.847720720724,3.25)); +#97718 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.25)); +#97719 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97720,#97721) + ,(#97722,#97723) + ,(#97724,#97725) + ,(#97726,#97727 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97720 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.251)); +#97721 = CARTESIAN_POINT('',(-0.470659979287,0.832748206729,3.25)); +#97722 = CARTESIAN_POINT('',(-0.425352528085,0.832748206729,3.251)); +#97723 = CARTESIAN_POINT('',(-0.425352528085,0.832748206729,3.25)); +#97724 = CARTESIAN_POINT('',(-0.387999224941,0.847720720724,3.251)); +#97725 = CARTESIAN_POINT('',(-0.387999224941,0.847720720724,3.25)); +#97726 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97727 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.25)); +#97728 = ADVANCED_FACE('',(#97729),#97756,.F.); +#97729 = FACE_BOUND('',#97730,.F.); +#97730 = EDGE_LOOP('',(#97731,#97732,#97741,#97749)); +#97731 = ORIENTED_EDGE('',*,*,#97705,.F.); +#97732 = ORIENTED_EDGE('',*,*,#97733,.T.); +#97733 = EDGE_CURVE('',#97697,#97734,#97736,.T.); +#97734 = VERTEX_POINT('',#97735); +#97735 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97736 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97737,#97738,#97739,#97740), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#97737 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97738 = CARTESIAN_POINT('',(-0.329200914772,0.907610776704,3.251)); +#97739 = CARTESIAN_POINT('',(-0.314540328152,0.947069589629,3.251)); +#97740 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97741 = ORIENTED_EDGE('',*,*,#97742,.T.); +#97742 = EDGE_CURVE('',#97734,#97743,#97745,.T.); +#97743 = VERTEX_POINT('',#97744); +#97744 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.25)); +#97745 = LINE('',#97746,#97747); +#97746 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97747 = VECTOR('',#97748,1.); +#97748 = DIRECTION('',(-0.,-0.,-1.)); +#97749 = ORIENTED_EDGE('',*,*,#97750,.F.); +#97750 = EDGE_CURVE('',#97706,#97743,#97751,.T.); +#97751 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97752,#97753,#97754,#97755), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#97752 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.25)); +#97753 = CARTESIAN_POINT('',(-0.329200914772,0.907610776704,3.25)); +#97754 = CARTESIAN_POINT('',(-0.314540328152,0.947069589629,3.25)); +#97755 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.25)); +#97756 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97757,#97758) + ,(#97759,#97760) + ,(#97761,#97762) + ,(#97763,#97764 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97757 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.251)); +#97758 = CARTESIAN_POINT('',(-0.358600069856,0.877665748715,3.25)); +#97759 = CARTESIAN_POINT('',(-0.329200914772,0.907610776704,3.251)); +#97760 = CARTESIAN_POINT('',(-0.329200914772,0.907610776704,3.25)); +#97761 = CARTESIAN_POINT('',(-0.314540328152,0.947069589629,3.251)); +#97762 = CARTESIAN_POINT('',(-0.314540328152,0.947069589629,3.25)); +#97763 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97764 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.25)); +#97765 = ADVANCED_FACE('',(#97766),#97793,.F.); +#97766 = FACE_BOUND('',#97767,.F.); +#97767 = EDGE_LOOP('',(#97768,#97769,#97778,#97786)); +#97768 = ORIENTED_EDGE('',*,*,#97742,.F.); +#97769 = ORIENTED_EDGE('',*,*,#97770,.T.); +#97770 = EDGE_CURVE('',#97734,#97771,#97773,.T.); +#97771 = VERTEX_POINT('',#97772); +#97772 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97773 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97774,#97775,#97776,#97777), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#97774 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97775 = CARTESIAN_POINT('',(-0.314540328152,1.041895511597,3.251)); +#97776 = CARTESIAN_POINT('',(-0.327563296054,1.078702941834,3.251)); +#97777 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97778 = ORIENTED_EDGE('',*,*,#97779,.T.); +#97779 = EDGE_CURVE('',#97771,#97780,#97782,.T.); +#97780 = VERTEX_POINT('',#97781); +#97781 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.25)); +#97782 = LINE('',#97783,#97784); +#97783 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97784 = VECTOR('',#97785,1.); +#97785 = DIRECTION('',(-0.,-0.,-1.)); +#97786 = ORIENTED_EDGE('',*,*,#97787,.F.); +#97787 = EDGE_CURVE('',#97743,#97780,#97788,.T.); +#97788 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97789,#97790,#97791,#97792), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#97789 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.25)); +#97790 = CARTESIAN_POINT('',(-0.314540328152,1.041895511597,3.25)); +#97791 = CARTESIAN_POINT('',(-0.327563296054,1.078702941834,3.25)); +#97792 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.25)); +#97793 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97794,#97795) + ,(#97796,#97797) + ,(#97798,#97799) + ,(#97800,#97801 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97794 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.251)); +#97795 = CARTESIAN_POINT('',(-0.314540328152,0.996198151175,3.25)); +#97796 = CARTESIAN_POINT('',(-0.314540328152,1.041895511597,3.251)); +#97797 = CARTESIAN_POINT('',(-0.314540328152,1.041895511597,3.25)); +#97798 = CARTESIAN_POINT('',(-0.327563296054,1.078702941834,3.251)); +#97799 = CARTESIAN_POINT('',(-0.327563296054,1.078702941834,3.25)); +#97800 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97801 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.25)); +#97802 = ADVANCED_FACE('',(#97803),#97821,.F.); +#97803 = FACE_BOUND('',#97804,.F.); +#97804 = EDGE_LOOP('',(#97805,#97806,#97813,#97814)); +#97805 = ORIENTED_EDGE('',*,*,#97779,.F.); +#97806 = ORIENTED_EDGE('',*,*,#97807,.T.); +#97807 = EDGE_CURVE('',#97771,#97329,#97808,.T.); +#97808 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97809,#97810,#97811,#97812), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#97809 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97810 = CARTESIAN_POINT('',(-0.37981113135,1.134226014565,3.251)); +#97811 = CARTESIAN_POINT('',(-0.414746997338,1.148106782748,3.251)); +#97812 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97813 = ORIENTED_EDGE('',*,*,#97328,.T.); +#97814 = ORIENTED_EDGE('',*,*,#97815,.F.); +#97815 = EDGE_CURVE('',#97780,#97331,#97816,.T.); +#97816 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#97817,#97818,#97819,#97820), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#97817 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.25)); +#97818 = CARTESIAN_POINT('',(-0.37981113135,1.134226014565,3.25)); +#97819 = CARTESIAN_POINT('',(-0.414746997338,1.148106782748,3.25)); +#97820 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.25)); +#97821 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#97822,#97823) + ,(#97824,#97825) + ,(#97826,#97827) + ,(#97828,#97829 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#97822 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.251)); +#97823 = CARTESIAN_POINT('',(-0.353687213702,1.106464478199,3.25)); +#97824 = CARTESIAN_POINT('',(-0.37981113135,1.134226014565,3.251)); +#97825 = CARTESIAN_POINT('',(-0.37981113135,1.134226014565,3.25)); +#97826 = CARTESIAN_POINT('',(-0.414746997338,1.148106782748,3.251)); +#97827 = CARTESIAN_POINT('',(-0.414746997338,1.148106782748,3.25)); +#97828 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.251)); +#97829 = CARTESIAN_POINT('',(-0.458494811667,1.148106782748,3.25)); +#97830 = ADVANCED_FACE('',(#97831),#97847,.T.); +#97831 = FACE_BOUND('',#97832,.T.); +#97832 = EDGE_LOOP('',(#97833,#97834,#97835,#97836,#97837,#97838,#97839, + #97840,#97841,#97842,#97843,#97844,#97845,#97846)); +#97833 = ORIENTED_EDGE('',*,*,#97338,.T.); +#97834 = ORIENTED_EDGE('',*,*,#97390,.T.); +#97835 = ORIENTED_EDGE('',*,*,#97406,.T.); +#97836 = ORIENTED_EDGE('',*,*,#97443,.T.); +#97837 = ORIENTED_EDGE('',*,*,#97480,.T.); +#97838 = ORIENTED_EDGE('',*,*,#97517,.T.); +#97839 = ORIENTED_EDGE('',*,*,#97554,.T.); +#97840 = ORIENTED_EDGE('',*,*,#97591,.T.); +#97841 = ORIENTED_EDGE('',*,*,#97643,.T.); +#97842 = ORIENTED_EDGE('',*,*,#97659,.T.); +#97843 = ORIENTED_EDGE('',*,*,#97696,.T.); +#97844 = ORIENTED_EDGE('',*,*,#97733,.T.); +#97845 = ORIENTED_EDGE('',*,*,#97770,.T.); +#97846 = ORIENTED_EDGE('',*,*,#97807,.T.); +#97847 = PLANE('',#97848); +#97848 = AXIS2_PLACEMENT_3D('',#97849,#97850,#97851); +#97849 = CARTESIAN_POINT('',(-0.504991485987,1.143661817656,3.251)); +#97850 = DIRECTION('',(0.,0.,1.)); +#97851 = DIRECTION('',(1.,0.,-0.)); +#97852 = ADVANCED_FACE('',(#97853),#97869,.F.); +#97853 = FACE_BOUND('',#97854,.T.); +#97854 = EDGE_LOOP('',(#97855,#97856,#97857,#97858,#97859,#97860,#97861, + #97862,#97863,#97864,#97865,#97866,#97867,#97868)); +#97855 = ORIENTED_EDGE('',*,*,#97355,.F.); +#97856 = ORIENTED_EDGE('',*,*,#97815,.F.); +#97857 = ORIENTED_EDGE('',*,*,#97787,.F.); +#97858 = ORIENTED_EDGE('',*,*,#97750,.F.); +#97859 = ORIENTED_EDGE('',*,*,#97713,.F.); +#97860 = ORIENTED_EDGE('',*,*,#97676,.F.); +#97861 = ORIENTED_EDGE('',*,*,#97627,.F.); +#97862 = ORIENTED_EDGE('',*,*,#97608,.F.); +#97863 = ORIENTED_EDGE('',*,*,#97571,.F.); +#97864 = ORIENTED_EDGE('',*,*,#97534,.F.); +#97865 = ORIENTED_EDGE('',*,*,#97497,.F.); +#97866 = ORIENTED_EDGE('',*,*,#97460,.F.); +#97867 = ORIENTED_EDGE('',*,*,#97423,.F.); +#97868 = ORIENTED_EDGE('',*,*,#97374,.F.); +#97869 = PLANE('',#97870); +#97870 = AXIS2_PLACEMENT_3D('',#97871,#97872,#97873); +#97871 = CARTESIAN_POINT('',(-0.504991485987,1.143661817656,3.25)); +#97872 = DIRECTION('',(0.,0.,1.)); +#97873 = DIRECTION('',(1.,0.,-0.)); +#97874 = MANIFOLD_SOLID_BREP('',#97875); +#97875 = CLOSED_SHELL('',(#97876,#97916,#97947,#97978,#98009,#98040, + #98071,#98102,#98133,#98164,#98195,#98226,#98248,#98268)); +#97876 = ADVANCED_FACE('',(#97877),#97911,.F.); +#97877 = FACE_BOUND('',#97878,.T.); +#97878 = EDGE_LOOP('',(#97879,#97889,#97897,#97905)); +#97879 = ORIENTED_EDGE('',*,*,#97880,.T.); +#97880 = EDGE_CURVE('',#97881,#97883,#97885,.T.); +#97881 = VERTEX_POINT('',#97882); +#97882 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.25)); +#97883 = VERTEX_POINT('',#97884); +#97884 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.25)); +#97885 = LINE('',#97886,#97887); +#97886 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.25)); +#97887 = VECTOR('',#97888,1.); +#97888 = DIRECTION('',(1.246929520517E-14,-1.,-0.)); +#97889 = ORIENTED_EDGE('',*,*,#97890,.F.); +#97890 = EDGE_CURVE('',#97891,#97883,#97893,.T.); +#97891 = VERTEX_POINT('',#97892); +#97892 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.251)); +#97893 = LINE('',#97894,#97895); +#97894 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.251)); +#97895 = VECTOR('',#97896,1.); +#97896 = DIRECTION('',(-0.,-0.,-1.)); +#97897 = ORIENTED_EDGE('',*,*,#97898,.F.); +#97898 = EDGE_CURVE('',#97899,#97891,#97901,.T.); +#97899 = VERTEX_POINT('',#97900); +#97900 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.251)); +#97901 = LINE('',#97902,#97903); +#97902 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.251)); +#97903 = VECTOR('',#97904,1.); +#97904 = DIRECTION('',(1.246929520517E-14,-1.,-0.)); +#97905 = ORIENTED_EDGE('',*,*,#97906,.T.); +#97906 = EDGE_CURVE('',#97899,#97881,#97907,.T.); +#97907 = LINE('',#97908,#97909); +#97908 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.251)); +#97909 = VECTOR('',#97910,1.); +#97910 = DIRECTION('',(-0.,-0.,-1.)); +#97911 = PLANE('',#97912); +#97912 = AXIS2_PLACEMENT_3D('',#97913,#97914,#97915); +#97913 = CARTESIAN_POINT('',(-0.76808273125,1.108180078761,3.251)); +#97914 = DIRECTION('',(1.,1.246929520517E-14,-0.)); +#97915 = DIRECTION('',(-1.246929520517E-14,1.,0.)); +#97916 = ADVANCED_FACE('',(#97917),#97942,.F.); +#97917 = FACE_BOUND('',#97918,.T.); +#97918 = EDGE_LOOP('',(#97919,#97927,#97935,#97941)); +#97919 = ORIENTED_EDGE('',*,*,#97920,.T.); +#97920 = EDGE_CURVE('',#97883,#97921,#97923,.T.); +#97921 = VERTEX_POINT('',#97922); +#97922 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.25)); +#97923 = LINE('',#97924,#97925); +#97924 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.25)); +#97925 = VECTOR('',#97926,1.); +#97926 = DIRECTION('',(1.,6.955979564125E-15,-0.)); +#97927 = ORIENTED_EDGE('',*,*,#97928,.F.); +#97928 = EDGE_CURVE('',#97929,#97921,#97931,.T.); +#97929 = VERTEX_POINT('',#97930); +#97930 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.251)); +#97931 = LINE('',#97932,#97933); +#97932 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.251)); +#97933 = VECTOR('',#97934,1.); +#97934 = DIRECTION('',(-0.,-0.,-1.)); +#97935 = ORIENTED_EDGE('',*,*,#97936,.F.); +#97936 = EDGE_CURVE('',#97891,#97929,#97937,.T.); +#97937 = LINE('',#97938,#97939); +#97938 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.251)); +#97939 = VECTOR('',#97940,1.); +#97940 = DIRECTION('',(1.,6.955979564125E-15,-0.)); +#97941 = ORIENTED_EDGE('',*,*,#97890,.T.); +#97942 = PLANE('',#97943); +#97943 = AXIS2_PLACEMENT_3D('',#97944,#97945,#97946); +#97944 = CARTESIAN_POINT('',(-0.643389763136,1.108180078761,3.251)); +#97945 = DIRECTION('',(-6.955979564125E-15,1.,0.)); +#97946 = DIRECTION('',(-1.,-6.955979564125E-15,0.)); +#97947 = ADVANCED_FACE('',(#97948),#97973,.F.); +#97948 = FACE_BOUND('',#97949,.T.); +#97949 = EDGE_LOOP('',(#97950,#97958,#97966,#97972)); +#97950 = ORIENTED_EDGE('',*,*,#97951,.T.); +#97951 = EDGE_CURVE('',#97921,#97952,#97954,.T.); +#97952 = VERTEX_POINT('',#97953); +#97953 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.25)); +#97954 = LINE('',#97955,#97956); +#97955 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.25)); +#97956 = VECTOR('',#97957,1.); +#97957 = DIRECTION('',(4.225916156166E-15,-1.,-0.)); +#97958 = ORIENTED_EDGE('',*,*,#97959,.F.); +#97959 = EDGE_CURVE('',#97960,#97952,#97962,.T.); +#97960 = VERTEX_POINT('',#97961); +#97961 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.251)); +#97962 = LINE('',#97963,#97964); +#97963 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.251)); +#97964 = VECTOR('',#97965,1.); +#97965 = DIRECTION('',(-0.,-0.,-1.)); +#97966 = ORIENTED_EDGE('',*,*,#97967,.F.); +#97967 = EDGE_CURVE('',#97929,#97960,#97968,.T.); +#97968 = LINE('',#97969,#97970); +#97969 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.251)); +#97970 = VECTOR('',#97971,1.); +#97971 = DIRECTION('',(4.225916156166E-15,-1.,-0.)); +#97972 = ORIENTED_EDGE('',*,*,#97928,.T.); +#97973 = PLANE('',#97974); +#97974 = AXIS2_PLACEMENT_3D('',#97975,#97976,#97977); +#97975 = CARTESIAN_POINT('',(-0.643389763136,1.005555972422,3.251)); +#97976 = DIRECTION('',(1.,4.225916156166E-15,-0.)); +#97977 = DIRECTION('',(-4.225916156166E-15,1.,0.)); +#97978 = ADVANCED_FACE('',(#97979),#98004,.F.); +#97979 = FACE_BOUND('',#97980,.T.); +#97980 = EDGE_LOOP('',(#97981,#97989,#97997,#98003)); +#97981 = ORIENTED_EDGE('',*,*,#97982,.T.); +#97982 = EDGE_CURVE('',#97952,#97983,#97985,.T.); +#97983 = VERTEX_POINT('',#97984); +#97984 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.25)); +#97985 = LINE('',#97986,#97987); +#97986 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.25)); +#97987 = VECTOR('',#97988,1.); +#97988 = DIRECTION('',(-1.,-3.97520061581E-15,-0.)); +#97989 = ORIENTED_EDGE('',*,*,#97990,.F.); +#97990 = EDGE_CURVE('',#97991,#97983,#97993,.T.); +#97991 = VERTEX_POINT('',#97992); +#97992 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.251)); +#97993 = LINE('',#97994,#97995); +#97994 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.251)); +#97995 = VECTOR('',#97996,1.); +#97996 = DIRECTION('',(-0.,-0.,-1.)); +#97997 = ORIENTED_EDGE('',*,*,#97998,.F.); +#97998 = EDGE_CURVE('',#97960,#97991,#97999,.T.); +#97999 = LINE('',#98000,#98001); +#98000 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.251)); +#98001 = VECTOR('',#98002,1.); +#98002 = DIRECTION('',(-1.,-3.97520061581E-15,-0.)); +#98003 = ORIENTED_EDGE('',*,*,#97959,.T.); +#98004 = PLANE('',#98005); +#98005 = AXIS2_PLACEMENT_3D('',#98006,#98007,#98008); +#98006 = CARTESIAN_POINT('',(-0.752486362505,1.005555972422,3.251)); +#98007 = DIRECTION('',(3.97520061581E-15,-1.,0.)); +#98008 = DIRECTION('',(1.,3.97520061581E-15,0.)); +#98009 = ADVANCED_FACE('',(#98010),#98035,.F.); +#98010 = FACE_BOUND('',#98011,.T.); +#98011 = EDGE_LOOP('',(#98012,#98020,#98028,#98034)); +#98012 = ORIENTED_EDGE('',*,*,#98013,.T.); +#98013 = EDGE_CURVE('',#97983,#98014,#98016,.T.); +#98014 = VERTEX_POINT('',#98015); +#98015 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.25)); +#98016 = LINE('',#98017,#98018); +#98017 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.25)); +#98018 = VECTOR('',#98019,1.); +#98019 = DIRECTION('',(-0.,-1.,-0.)); +#98020 = ORIENTED_EDGE('',*,*,#98021,.F.); +#98021 = EDGE_CURVE('',#98022,#98014,#98024,.T.); +#98022 = VERTEX_POINT('',#98023); +#98023 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.251)); +#98024 = LINE('',#98025,#98026); +#98025 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.251)); +#98026 = VECTOR('',#98027,1.); +#98027 = DIRECTION('',(-0.,-0.,-1.)); +#98028 = ORIENTED_EDGE('',*,*,#98029,.F.); +#98029 = EDGE_CURVE('',#97991,#98022,#98030,.T.); +#98030 = LINE('',#98031,#98032); +#98031 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.251)); +#98032 = VECTOR('',#98033,1.); +#98033 = DIRECTION('',(-0.,-1.,-0.)); +#98034 = ORIENTED_EDGE('',*,*,#97990,.T.); +#98035 = PLANE('',#98036); +#98036 = AXIS2_PLACEMENT_3D('',#98037,#98038,#98039); +#98037 = CARTESIAN_POINT('',(-0.752486362505,0.970620106434,3.251)); +#98038 = DIRECTION('',(1.,0.,0.)); +#98039 = DIRECTION('',(0.,0.,-1.)); +#98040 = ADVANCED_FACE('',(#98041),#98066,.F.); +#98041 = FACE_BOUND('',#98042,.T.); +#98042 = EDGE_LOOP('',(#98043,#98051,#98059,#98065)); +#98043 = ORIENTED_EDGE('',*,*,#98044,.T.); +#98044 = EDGE_CURVE('',#98014,#98045,#98047,.T.); +#98045 = VERTEX_POINT('',#98046); +#98046 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.25)); +#98047 = LINE('',#98048,#98049); +#98048 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.25)); +#98049 = VECTOR('',#98050,1.); +#98050 = DIRECTION('',(1.,5.962800923714E-15,-0.)); +#98051 = ORIENTED_EDGE('',*,*,#98052,.F.); +#98052 = EDGE_CURVE('',#98053,#98045,#98055,.T.); +#98053 = VERTEX_POINT('',#98054); +#98054 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.251)); +#98055 = LINE('',#98056,#98057); +#98056 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.251)); +#98057 = VECTOR('',#98058,1.); +#98058 = DIRECTION('',(-0.,-0.,-1.)); +#98059 = ORIENTED_EDGE('',*,*,#98060,.F.); +#98060 = EDGE_CURVE('',#98022,#98053,#98061,.T.); +#98061 = LINE('',#98062,#98063); +#98062 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.251)); +#98063 = VECTOR('',#98064,1.); +#98064 = DIRECTION('',(1.,5.962800923714E-15,-0.)); +#98065 = ORIENTED_EDGE('',*,*,#98021,.T.); +#98066 = PLANE('',#98067); +#98067 = AXIS2_PLACEMENT_3D('',#98068,#98069,#98070); +#98068 = CARTESIAN_POINT('',(-0.643389763136,0.970620106434,3.251)); +#98069 = DIRECTION('',(-5.962800923714E-15,1.,0.)); +#98070 = DIRECTION('',(-1.,-5.962800923714E-15,0.)); +#98071 = ADVANCED_FACE('',(#98072),#98097,.F.); +#98072 = FACE_BOUND('',#98073,.T.); +#98073 = EDGE_LOOP('',(#98074,#98082,#98090,#98096)); +#98074 = ORIENTED_EDGE('',*,*,#98075,.T.); +#98075 = EDGE_CURVE('',#98045,#98076,#98078,.T.); +#98076 = VERTEX_POINT('',#98077); +#98077 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.25)); +#98078 = LINE('',#98079,#98080); +#98079 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.25)); +#98080 = VECTOR('',#98081,1.); +#98081 = DIRECTION('',(4.441937429256E-15,-1.,-0.)); +#98082 = ORIENTED_EDGE('',*,*,#98083,.F.); +#98083 = EDGE_CURVE('',#98084,#98076,#98086,.T.); +#98084 = VERTEX_POINT('',#98085); +#98085 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.251)); +#98086 = LINE('',#98087,#98088); +#98087 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.251)); +#98088 = VECTOR('',#98089,1.); +#98089 = DIRECTION('',(-0.,-0.,-1.)); +#98090 = ORIENTED_EDGE('',*,*,#98091,.F.); +#98091 = EDGE_CURVE('',#98053,#98084,#98092,.T.); +#98092 = LINE('',#98093,#98094); +#98093 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.251)); +#98094 = VECTOR('',#98095,1.); +#98095 = DIRECTION('',(4.441937429256E-15,-1.,-0.)); +#98096 = ORIENTED_EDGE('',*,*,#98052,.T.); +#98097 = PLANE('',#98098); +#98098 = AXIS2_PLACEMENT_3D('',#98099,#98100,#98101); +#98099 = CARTESIAN_POINT('',(-0.643389763136,0.87298683809,3.251)); +#98100 = DIRECTION('',(1.,4.441937429256E-15,-0.)); +#98101 = DIRECTION('',(-4.441937429256E-15,1.,0.)); +#98102 = ADVANCED_FACE('',(#98103),#98128,.F.); +#98103 = FACE_BOUND('',#98104,.T.); +#98104 = EDGE_LOOP('',(#98105,#98113,#98121,#98127)); +#98105 = ORIENTED_EDGE('',*,*,#98106,.T.); +#98106 = EDGE_CURVE('',#98076,#98107,#98109,.T.); +#98107 = VERTEX_POINT('',#98108); +#98108 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.25)); +#98109 = LINE('',#98110,#98111); +#98110 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.25)); +#98111 = VECTOR('',#98112,1.); +#98112 = DIRECTION('',(-1.,-6.445221793117E-15,-0.)); +#98113 = ORIENTED_EDGE('',*,*,#98114,.F.); +#98114 = EDGE_CURVE('',#98115,#98107,#98117,.T.); +#98115 = VERTEX_POINT('',#98116); +#98116 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.251)); +#98117 = LINE('',#98118,#98119); +#98118 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.251)); +#98119 = VECTOR('',#98120,1.); +#98120 = DIRECTION('',(-0.,-0.,-1.)); +#98121 = ORIENTED_EDGE('',*,*,#98122,.F.); +#98122 = EDGE_CURVE('',#98084,#98115,#98123,.T.); +#98123 = LINE('',#98124,#98125); +#98124 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.251)); +#98125 = VECTOR('',#98126,1.); +#98126 = DIRECTION('',(-1.,-6.445221793117E-15,-0.)); +#98127 = ORIENTED_EDGE('',*,*,#98083,.T.); +#98128 = PLANE('',#98129); +#98129 = AXIS2_PLACEMENT_3D('',#98130,#98131,#98132); +#98130 = CARTESIAN_POINT('',(-0.761142347159,0.87298683809,3.251)); +#98131 = DIRECTION('',(6.445221793117E-15,-1.,0.)); +#98132 = DIRECTION('',(1.,6.445221793117E-15,0.)); +#98133 = ADVANCED_FACE('',(#98134),#98159,.F.); +#98134 = FACE_BOUND('',#98135,.T.); +#98135 = EDGE_LOOP('',(#98136,#98144,#98152,#98158)); +#98136 = ORIENTED_EDGE('',*,*,#98137,.T.); +#98137 = EDGE_CURVE('',#98107,#98138,#98140,.T.); +#98138 = VERTEX_POINT('',#98139); +#98139 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.25)); +#98140 = LINE('',#98141,#98142); +#98141 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.25)); +#98142 = VECTOR('',#98143,1.); +#98143 = DIRECTION('',(1.23584570257E-14,-1.,-0.)); +#98144 = ORIENTED_EDGE('',*,*,#98145,.F.); +#98145 = EDGE_CURVE('',#98146,#98138,#98148,.T.); +#98146 = VERTEX_POINT('',#98147); +#98147 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.251)); +#98148 = LINE('',#98149,#98150); +#98149 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.251)); +#98150 = VECTOR('',#98151,1.); +#98151 = DIRECTION('',(-0.,-0.,-1.)); +#98152 = ORIENTED_EDGE('',*,*,#98153,.F.); +#98153 = EDGE_CURVE('',#98115,#98146,#98154,.T.); +#98154 = LINE('',#98155,#98156); +#98155 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.251)); +#98156 = VECTOR('',#98157,1.); +#98157 = DIRECTION('',(1.23584570257E-14,-1.,-0.)); +#98158 = ORIENTED_EDGE('',*,*,#98114,.T.); +#98159 = PLANE('',#98160); +#98160 = AXIS2_PLACEMENT_3D('',#98161,#98162,#98163); +#98161 = CARTESIAN_POINT('',(-0.761142347159,0.837895008415,3.251)); +#98162 = DIRECTION('',(1.,1.23584570257E-14,-0.)); +#98163 = DIRECTION('',(-1.23584570257E-14,1.,0.)); +#98164 = ADVANCED_FACE('',(#98165),#98190,.F.); +#98165 = FACE_BOUND('',#98166,.T.); +#98166 = EDGE_LOOP('',(#98167,#98175,#98183,#98189)); +#98167 = ORIENTED_EDGE('',*,*,#98168,.T.); +#98168 = EDGE_CURVE('',#98138,#98169,#98171,.T.); +#98169 = VERTEX_POINT('',#98170); +#98170 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.25)); +#98171 = LINE('',#98172,#98173); +#98172 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.25)); +#98173 = VECTOR('',#98174,1.); +#98174 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#98175 = ORIENTED_EDGE('',*,*,#98176,.F.); +#98176 = EDGE_CURVE('',#98177,#98169,#98179,.T.); +#98177 = VERTEX_POINT('',#98178); +#98178 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.251)); +#98179 = LINE('',#98180,#98181); +#98180 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.251)); +#98181 = VECTOR('',#98182,1.); +#98182 = DIRECTION('',(-0.,-0.,-1.)); +#98183 = ORIENTED_EDGE('',*,*,#98184,.F.); +#98184 = EDGE_CURVE('',#98146,#98177,#98185,.T.); +#98185 = LINE('',#98186,#98187); +#98186 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.251)); +#98187 = VECTOR('',#98188,1.); +#98188 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#98189 = ORIENTED_EDGE('',*,*,#98145,.T.); +#98190 = PLANE('',#98191); +#98191 = AXIS2_PLACEMENT_3D('',#98192,#98193,#98194); +#98192 = CARTESIAN_POINT('',(-0.604008932056,0.837895008415,3.251)); +#98193 = DIRECTION('',(-6.899882954709E-15,1.,0.)); +#98194 = DIRECTION('',(-1.,-6.899882954709E-15,0.)); +#98195 = ADVANCED_FACE('',(#98196),#98221,.F.); +#98196 = FACE_BOUND('',#98197,.T.); +#98197 = EDGE_LOOP('',(#98198,#98206,#98214,#98220)); +#98198 = ORIENTED_EDGE('',*,*,#98199,.T.); +#98199 = EDGE_CURVE('',#98169,#98200,#98202,.T.); +#98200 = VERTEX_POINT('',#98201); +#98201 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.25)); +#98202 = LINE('',#98203,#98204); +#98203 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.25)); +#98204 = VECTOR('',#98205,1.); +#98205 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#98206 = ORIENTED_EDGE('',*,*,#98207,.F.); +#98207 = EDGE_CURVE('',#98208,#98200,#98210,.T.); +#98208 = VERTEX_POINT('',#98209); +#98209 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.251)); +#98210 = LINE('',#98211,#98212); +#98211 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.251)); +#98212 = VECTOR('',#98213,1.); +#98213 = DIRECTION('',(-0.,-0.,-1.)); +#98214 = ORIENTED_EDGE('',*,*,#98215,.F.); +#98215 = EDGE_CURVE('',#98177,#98208,#98216,.T.); +#98216 = LINE('',#98217,#98218); +#98217 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.251)); +#98218 = VECTOR('',#98219,1.); +#98219 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#98220 = ORIENTED_EDGE('',*,*,#98176,.T.); +#98221 = PLANE('',#98222); +#98222 = AXIS2_PLACEMENT_3D('',#98223,#98224,#98225); +#98223 = CARTESIAN_POINT('',(-0.604008932056,1.142959981062,3.251)); +#98224 = DIRECTION('',(-1.,-7.108008258556E-15,0.)); +#98225 = DIRECTION('',(7.108008258556E-15,-1.,0.)); +#98226 = ADVANCED_FACE('',(#98227),#98243,.F.); +#98227 = FACE_BOUND('',#98228,.T.); +#98228 = EDGE_LOOP('',(#98229,#98235,#98236,#98242)); +#98229 = ORIENTED_EDGE('',*,*,#98230,.T.); +#98230 = EDGE_CURVE('',#98200,#97881,#98231,.T.); +#98231 = LINE('',#98232,#98233); +#98232 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.25)); +#98233 = VECTOR('',#98234,1.); +#98234 = DIRECTION('',(-1.,-6.60801528222E-15,-0.)); +#98235 = ORIENTED_EDGE('',*,*,#97906,.F.); +#98236 = ORIENTED_EDGE('',*,*,#98237,.F.); +#98237 = EDGE_CURVE('',#98208,#97899,#98238,.T.); +#98238 = LINE('',#98239,#98240); +#98239 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.251)); +#98240 = VECTOR('',#98241,1.); +#98241 = DIRECTION('',(-1.,-6.60801528222E-15,-0.)); +#98242 = ORIENTED_EDGE('',*,*,#98207,.T.); +#98243 = PLANE('',#98244); +#98244 = AXIS2_PLACEMENT_3D('',#98245,#98246,#98247); +#98245 = CARTESIAN_POINT('',(-0.76808273125,1.142959981062,3.251)); +#98246 = DIRECTION('',(6.60801528222E-15,-1.,0.)); +#98247 = DIRECTION('',(1.,6.60801528222E-15,0.)); +#98248 = ADVANCED_FACE('',(#98249),#98263,.F.); +#98249 = FACE_BOUND('',#98250,.T.); +#98250 = EDGE_LOOP('',(#98251,#98252,#98253,#98254,#98255,#98256,#98257, + #98258,#98259,#98260,#98261,#98262)); +#98251 = ORIENTED_EDGE('',*,*,#97898,.T.); +#98252 = ORIENTED_EDGE('',*,*,#97936,.T.); +#98253 = ORIENTED_EDGE('',*,*,#97967,.T.); +#98254 = ORIENTED_EDGE('',*,*,#97998,.T.); +#98255 = ORIENTED_EDGE('',*,*,#98029,.T.); +#98256 = ORIENTED_EDGE('',*,*,#98060,.T.); +#98257 = ORIENTED_EDGE('',*,*,#98091,.T.); +#98258 = ORIENTED_EDGE('',*,*,#98122,.T.); +#98259 = ORIENTED_EDGE('',*,*,#98153,.T.); +#98260 = ORIENTED_EDGE('',*,*,#98184,.T.); +#98261 = ORIENTED_EDGE('',*,*,#98215,.T.); +#98262 = ORIENTED_EDGE('',*,*,#98237,.T.); +#98263 = PLANE('',#98264); +#98264 = AXIS2_PLACEMENT_3D('',#98265,#98266,#98267); +#98265 = CARTESIAN_POINT('',(0.,0.,3.251)); +#98266 = DIRECTION('',(0.,0.,-1.)); +#98267 = DIRECTION('',(-1.,0.,-0.)); +#98268 = ADVANCED_FACE('',(#98269),#98283,.T.); +#98269 = FACE_BOUND('',#98270,.T.); +#98270 = EDGE_LOOP('',(#98271,#98272,#98273,#98274,#98275,#98276,#98277, + #98278,#98279,#98280,#98281,#98282)); +#98271 = ORIENTED_EDGE('',*,*,#97880,.F.); +#98272 = ORIENTED_EDGE('',*,*,#98230,.F.); +#98273 = ORIENTED_EDGE('',*,*,#98199,.F.); +#98274 = ORIENTED_EDGE('',*,*,#98168,.F.); +#98275 = ORIENTED_EDGE('',*,*,#98137,.F.); +#98276 = ORIENTED_EDGE('',*,*,#98106,.F.); +#98277 = ORIENTED_EDGE('',*,*,#98075,.F.); +#98278 = ORIENTED_EDGE('',*,*,#98044,.F.); +#98279 = ORIENTED_EDGE('',*,*,#98013,.F.); +#98280 = ORIENTED_EDGE('',*,*,#97982,.F.); +#98281 = ORIENTED_EDGE('',*,*,#97951,.F.); +#98282 = ORIENTED_EDGE('',*,*,#97920,.F.); +#98283 = PLANE('',#98284); +#98284 = AXIS2_PLACEMENT_3D('',#98285,#98286,#98287); +#98285 = CARTESIAN_POINT('',(0.,0.,3.25)); +#98286 = DIRECTION('',(0.,0.,-1.)); +#98287 = DIRECTION('',(-1.,0.,-0.)); +#98288 = MANIFOLD_SOLID_BREP('',#98289); +#98289 = CLOSED_SHELL('',(#98290,#98420,#98550,#98572,#98593,#98614, + #98635,#98656,#98673,#98685,#98707,#98724,#98741,#98762,#98783, + #98804)); +#98290 = ADVANCED_FACE('',(#98291,#98353),#98415,.T.); +#98291 = FACE_BOUND('',#98292,.T.); +#98292 = EDGE_LOOP('',(#98293,#98303,#98312,#98321,#98330,#98339,#98347) + ); +#98293 = ORIENTED_EDGE('',*,*,#98294,.T.); +#98294 = EDGE_CURVE('',#98295,#98297,#98299,.T.); +#98295 = VERTEX_POINT('',#98296); +#98296 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.251)); +#98297 = VERTEX_POINT('',#98298); +#98298 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98299 = LINE('',#98300,#98301); +#98300 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98301 = VECTOR('',#98302,1.); +#98302 = DIRECTION('',(-1.,-7.752749528092E-15,-0.)); +#98303 = ORIENTED_EDGE('',*,*,#98304,.T.); +#98304 = EDGE_CURVE('',#98297,#98305,#98307,.T.); +#98305 = VERTEX_POINT('',#98306); +#98306 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98307 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98308,#98309,#98310,#98311), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#98308 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98309 = CARTESIAN_POINT('',(-0.957890538873,1.142959981062,3.251)); +#98310 = CARTESIAN_POINT('',(-0.997427333642,1.128767285504,3.251)); +#98311 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98312 = ORIENTED_EDGE('',*,*,#98313,.T.); +#98313 = EDGE_CURVE('',#98305,#98314,#98316,.T.); +#98314 = VERTEX_POINT('',#98315); +#98315 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98316 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98317,#98318,#98319,#98320), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#98317 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98318 = CARTESIAN_POINT('',(-1.05872106281,1.071684575899,3.251)); +#98319 = CARTESIAN_POINT('',(-1.074083486023,1.033785399849,3.251)); +#98320 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98321 = ORIENTED_EDGE('',*,*,#98322,.T.); +#98322 = EDGE_CURVE('',#98314,#98323,#98325,.T.); +#98323 = VERTEX_POINT('',#98324); +#98324 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98325 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98326,#98327,#98328,#98329), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#98326 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98327 = CARTESIAN_POINT('',(-1.074083486023,0.941298933194,3.251)); +#98328 = CARTESIAN_POINT('',(-1.05872106281,0.905271321393,3.251)); +#98329 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98330 = ORIENTED_EDGE('',*,*,#98331,.T.); +#98331 = EDGE_CURVE('',#98323,#98332,#98334,.T.); +#98332 = VERTEX_POINT('',#98333); +#98333 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.251)); +#98334 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98335,#98336,#98337,#98338), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#98335 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98336 = CARTESIAN_POINT('',(-0.997427333642,0.851307885535,3.251)); +#98337 = CARTESIAN_POINT('',(-0.958982284686,0.837895008415,3.251)); +#98338 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.251)); +#98339 = ORIENTED_EDGE('',*,*,#98340,.T.); +#98340 = EDGE_CURVE('',#98332,#98341,#98343,.T.); +#98341 = VERTEX_POINT('',#98342); +#98342 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.251)); +#98343 = LINE('',#98344,#98345); +#98344 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.251)); +#98345 = VECTOR('',#98346,1.); +#98346 = DIRECTION('',(1.,6.229061000724E-15,-0.)); +#98347 = ORIENTED_EDGE('',*,*,#98348,.T.); +#98348 = EDGE_CURVE('',#98341,#98295,#98349,.T.); +#98349 = LINE('',#98350,#98351); +#98350 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.251)); +#98351 = VECTOR('',#98352,1.); +#98352 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#98353 = FACE_BOUND('',#98354,.T.); +#98354 = EDGE_LOOP('',(#98355,#98365,#98373,#98382,#98391,#98400,#98409) + ); +#98355 = ORIENTED_EDGE('',*,*,#98356,.F.); +#98356 = EDGE_CURVE('',#98357,#98359,#98361,.T.); +#98357 = VERTEX_POINT('',#98358); +#98358 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.251)); +#98359 = VERTEX_POINT('',#98360); +#98360 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.251)); +#98361 = LINE('',#98362,#98363); +#98362 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.251)); +#98363 = VECTOR('',#98364,1.); +#98364 = DIRECTION('',(-7.375736951567E-15,1.,0.)); +#98365 = ORIENTED_EDGE('',*,*,#98366,.F.); +#98366 = EDGE_CURVE('',#98367,#98357,#98369,.T.); +#98367 = VERTEX_POINT('',#98368); +#98368 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98369 = LINE('',#98370,#98371); +#98370 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98371 = VECTOR('',#98372,1.); +#98372 = DIRECTION('',(1.,9.409992659565E-15,0.)); +#98373 = ORIENTED_EDGE('',*,*,#98374,.F.); +#98374 = EDGE_CURVE('',#98375,#98367,#98377,.T.); +#98375 = VERTEX_POINT('',#98376); +#98376 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98377 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98378,#98379,#98380,#98381), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#98378 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98379 = CARTESIAN_POINT('',(-0.976918108741,0.882500623024,3.251)); +#98380 = CARTESIAN_POINT('',(-0.947518953657,0.87298683809,3.251)); +#98381 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98382 = ORIENTED_EDGE('',*,*,#98383,.F.); +#98383 = EDGE_CURVE('',#98384,#98375,#98386,.T.); +#98384 = VERTEX_POINT('',#98385); +#98385 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98386 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98387,#98388,#98389,#98390), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#98387 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98388 = CARTESIAN_POINT('',(-1.032675127007,0.949565008627,3.251)); +#98389 = CARTESIAN_POINT('',(-1.021523723352,0.920867690136,3.251)); +#98390 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98391 = ORIENTED_EDGE('',*,*,#98392,.F.); +#98392 = EDGE_CURVE('',#98393,#98384,#98395,.T.); +#98393 = VERTEX_POINT('',#98394); +#98394 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98395 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98396,#98397,#98398,#98399), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#98396 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98397 = CARTESIAN_POINT('',(-1.021835650729,1.055308388717,3.251)); +#98398 = CARTESIAN_POINT('',(-1.032675127007,1.025675288102,3.251)); +#98399 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98400 = ORIENTED_EDGE('',*,*,#98401,.F.); +#98401 = EDGE_CURVE('',#98402,#98393,#98404,.T.); +#98402 = VERTEX_POINT('',#98403); +#98403 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.251)); +#98404 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98405,#98406,#98407,#98408), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#98405 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.251)); +#98406 = CARTESIAN_POINT('',(-0.948142808409,1.108180078761,3.251)); +#98407 = CARTESIAN_POINT('',(-0.978399763774,1.097574548015,3.251)); +#98408 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98409 = ORIENTED_EDGE('',*,*,#98410,.F.); +#98410 = EDGE_CURVE('',#98359,#98402,#98411,.T.); +#98411 = LINE('',#98412,#98413); +#98412 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.251)); +#98413 = VECTOR('',#98414,1.); +#98414 = DIRECTION('',(-1.,-9.791031094295E-15,0.)); +#98415 = PLANE('',#98416); +#98416 = AXIS2_PLACEMENT_3D('',#98417,#98418,#98419); +#98417 = CARTESIAN_POINT('',(-0.976255263071,0.847974161716,3.251)); +#98418 = DIRECTION('',(0.,0.,1.)); +#98419 = DIRECTION('',(1.,0.,-0.)); +#98420 = ADVANCED_FACE('',(#98421,#98483),#98545,.F.); +#98421 = FACE_BOUND('',#98422,.T.); +#98422 = EDGE_LOOP('',(#98423,#98433,#98441,#98449,#98458,#98467,#98476) + ); +#98423 = ORIENTED_EDGE('',*,*,#98424,.F.); +#98424 = EDGE_CURVE('',#98425,#98427,#98429,.T.); +#98425 = VERTEX_POINT('',#98426); +#98426 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.25)); +#98427 = VERTEX_POINT('',#98428); +#98428 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.25)); +#98429 = LINE('',#98430,#98431); +#98430 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.25)); +#98431 = VECTOR('',#98432,1.); +#98432 = DIRECTION('',(-1.,-7.752749528092E-15,-0.)); +#98433 = ORIENTED_EDGE('',*,*,#98434,.F.); +#98434 = EDGE_CURVE('',#98435,#98425,#98437,.T.); +#98435 = VERTEX_POINT('',#98436); +#98436 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.25)); +#98437 = LINE('',#98438,#98439); +#98438 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.25)); +#98439 = VECTOR('',#98440,1.); +#98440 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#98441 = ORIENTED_EDGE('',*,*,#98442,.F.); +#98442 = EDGE_CURVE('',#98443,#98435,#98445,.T.); +#98443 = VERTEX_POINT('',#98444); +#98444 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.25)); +#98445 = LINE('',#98446,#98447); +#98446 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.25)); +#98447 = VECTOR('',#98448,1.); +#98448 = DIRECTION('',(1.,6.229061000724E-15,-0.)); +#98449 = ORIENTED_EDGE('',*,*,#98450,.F.); +#98450 = EDGE_CURVE('',#98451,#98443,#98453,.T.); +#98451 = VERTEX_POINT('',#98452); +#98452 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.25)); +#98453 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98454,#98455,#98456,#98457), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#98454 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.25)); +#98455 = CARTESIAN_POINT('',(-0.997427333642,0.851307885535,3.25)); +#98456 = CARTESIAN_POINT('',(-0.958982284686,0.837895008415,3.25)); +#98457 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.25)); +#98458 = ORIENTED_EDGE('',*,*,#98459,.F.); +#98459 = EDGE_CURVE('',#98460,#98451,#98462,.T.); +#98460 = VERTEX_POINT('',#98461); +#98461 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.25)); +#98462 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98463,#98464,#98465,#98466), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#98463 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.25)); +#98464 = CARTESIAN_POINT('',(-1.074083486023,0.941298933194,3.25)); +#98465 = CARTESIAN_POINT('',(-1.05872106281,0.905271321393,3.25)); +#98466 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.25)); +#98467 = ORIENTED_EDGE('',*,*,#98468,.F.); +#98468 = EDGE_CURVE('',#98469,#98460,#98471,.T.); +#98469 = VERTEX_POINT('',#98470); +#98470 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.25)); +#98471 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98472,#98473,#98474,#98475), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#98472 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.25)); +#98473 = CARTESIAN_POINT('',(-1.05872106281,1.071684575899,3.25)); +#98474 = CARTESIAN_POINT('',(-1.074083486023,1.033785399849,3.25)); +#98475 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.25)); +#98476 = ORIENTED_EDGE('',*,*,#98477,.F.); +#98477 = EDGE_CURVE('',#98427,#98469,#98478,.T.); +#98478 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98479,#98480,#98481,#98482), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#98479 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.25)); +#98480 = CARTESIAN_POINT('',(-0.957890538873,1.142959981062,3.25)); +#98481 = CARTESIAN_POINT('',(-0.997427333642,1.128767285504,3.25)); +#98482 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.25)); +#98483 = FACE_BOUND('',#98484,.T.); +#98484 = EDGE_LOOP('',(#98485,#98495,#98503,#98511,#98520,#98529,#98538) + ); +#98485 = ORIENTED_EDGE('',*,*,#98486,.T.); +#98486 = EDGE_CURVE('',#98487,#98489,#98491,.T.); +#98487 = VERTEX_POINT('',#98488); +#98488 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.25)); +#98489 = VERTEX_POINT('',#98490); +#98490 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.25)); +#98491 = LINE('',#98492,#98493); +#98492 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.25)); +#98493 = VECTOR('',#98494,1.); +#98494 = DIRECTION('',(1.,9.409992659565E-15,0.)); +#98495 = ORIENTED_EDGE('',*,*,#98496,.T.); +#98496 = EDGE_CURVE('',#98489,#98497,#98499,.T.); +#98497 = VERTEX_POINT('',#98498); +#98498 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.25)); +#98499 = LINE('',#98500,#98501); +#98500 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.25)); +#98501 = VECTOR('',#98502,1.); +#98502 = DIRECTION('',(-7.375736951567E-15,1.,0.)); +#98503 = ORIENTED_EDGE('',*,*,#98504,.T.); +#98504 = EDGE_CURVE('',#98497,#98505,#98507,.T.); +#98505 = VERTEX_POINT('',#98506); +#98506 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.25)); +#98507 = LINE('',#98508,#98509); +#98508 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.25)); +#98509 = VECTOR('',#98510,1.); +#98510 = DIRECTION('',(-1.,-9.791031094295E-15,0.)); +#98511 = ORIENTED_EDGE('',*,*,#98512,.T.); +#98512 = EDGE_CURVE('',#98505,#98513,#98515,.T.); +#98513 = VERTEX_POINT('',#98514); +#98514 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.25)); +#98515 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98516,#98517,#98518,#98519), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#98516 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.25)); +#98517 = CARTESIAN_POINT('',(-0.948142808409,1.108180078761,3.25)); +#98518 = CARTESIAN_POINT('',(-0.978399763774,1.097574548015,3.25)); +#98519 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.25)); +#98520 = ORIENTED_EDGE('',*,*,#98521,.T.); +#98521 = EDGE_CURVE('',#98513,#98522,#98524,.T.); +#98522 = VERTEX_POINT('',#98523); +#98523 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.25)); +#98524 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98525,#98526,#98527,#98528), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#98525 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.25)); +#98526 = CARTESIAN_POINT('',(-1.021835650729,1.055308388717,3.25)); +#98527 = CARTESIAN_POINT('',(-1.032675127007,1.025675288102,3.25)); +#98528 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.25)); +#98529 = ORIENTED_EDGE('',*,*,#98530,.T.); +#98530 = EDGE_CURVE('',#98522,#98531,#98533,.T.); +#98531 = VERTEX_POINT('',#98532); +#98532 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.25)); +#98533 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98534,#98535,#98536,#98537), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#98534 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.25)); +#98535 = CARTESIAN_POINT('',(-1.032675127007,0.949565008627,3.25)); +#98536 = CARTESIAN_POINT('',(-1.021523723352,0.920867690136,3.25)); +#98537 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.25)); +#98538 = ORIENTED_EDGE('',*,*,#98539,.T.); +#98539 = EDGE_CURVE('',#98531,#98487,#98540,.T.); +#98540 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98541,#98542,#98543,#98544), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#98541 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.25)); +#98542 = CARTESIAN_POINT('',(-0.976918108741,0.882500623024,3.25)); +#98543 = CARTESIAN_POINT('',(-0.947518953657,0.87298683809,3.25)); +#98544 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.25)); +#98545 = PLANE('',#98546); +#98546 = AXIS2_PLACEMENT_3D('',#98547,#98548,#98549); +#98547 = CARTESIAN_POINT('',(-0.976255263071,0.847974161716,3.25)); +#98548 = DIRECTION('',(0.,0.,1.)); +#98549 = DIRECTION('',(1.,0.,-0.)); +#98550 = ADVANCED_FACE('',(#98551),#98567,.F.); +#98551 = FACE_BOUND('',#98552,.T.); +#98552 = EDGE_LOOP('',(#98553,#98554,#98560,#98561)); +#98553 = ORIENTED_EDGE('',*,*,#98424,.T.); +#98554 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98555 = EDGE_CURVE('',#98297,#98427,#98556,.T.); +#98556 = LINE('',#98557,#98558); +#98557 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98558 = VECTOR('',#98559,1.); +#98559 = DIRECTION('',(-0.,-0.,-1.)); +#98560 = ORIENTED_EDGE('',*,*,#98294,.F.); +#98561 = ORIENTED_EDGE('',*,*,#98562,.T.); +#98562 = EDGE_CURVE('',#98295,#98425,#98563,.T.); +#98563 = LINE('',#98564,#98565); +#98564 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.251)); +#98565 = VECTOR('',#98566,1.); +#98566 = DIRECTION('',(-0.,-0.,-1.)); +#98567 = PLANE('',#98568); +#98568 = AXIS2_PLACEMENT_3D('',#98569,#98570,#98571); +#98569 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98570 = DIRECTION('',(7.752749528092E-15,-1.,0.)); +#98571 = DIRECTION('',(1.,7.752749528092E-15,0.)); +#98572 = ADVANCED_FACE('',(#98573),#98584,.F.); +#98573 = FACE_BOUND('',#98574,.F.); +#98574 = EDGE_LOOP('',(#98575,#98576,#98577,#98583)); +#98575 = ORIENTED_EDGE('',*,*,#98555,.F.); +#98576 = ORIENTED_EDGE('',*,*,#98304,.T.); +#98577 = ORIENTED_EDGE('',*,*,#98578,.T.); +#98578 = EDGE_CURVE('',#98305,#98469,#98579,.T.); +#98579 = LINE('',#98580,#98581); +#98580 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98581 = VECTOR('',#98582,1.); +#98582 = DIRECTION('',(-0.,-0.,-1.)); +#98583 = ORIENTED_EDGE('',*,*,#98477,.F.); +#98584 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98585,#98586) + ,(#98587,#98588) + ,(#98589,#98590) + ,(#98591,#98592 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98585 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.251)); +#98586 = CARTESIAN_POINT('',(-0.909619777609,1.142959981062,3.25)); +#98587 = CARTESIAN_POINT('',(-0.957890538873,1.142959981062,3.251)); +#98588 = CARTESIAN_POINT('',(-0.957890538873,1.142959981062,3.25)); +#98589 = CARTESIAN_POINT('',(-0.997427333642,1.128767285504,3.251)); +#98590 = CARTESIAN_POINT('',(-0.997427333642,1.128767285504,3.25)); +#98591 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98592 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.25)); +#98593 = ADVANCED_FACE('',(#98594),#98605,.F.); +#98594 = FACE_BOUND('',#98595,.F.); +#98595 = EDGE_LOOP('',(#98596,#98597,#98598,#98604)); +#98596 = ORIENTED_EDGE('',*,*,#98578,.F.); +#98597 = ORIENTED_EDGE('',*,*,#98313,.T.); +#98598 = ORIENTED_EDGE('',*,*,#98599,.T.); +#98599 = EDGE_CURVE('',#98314,#98460,#98600,.T.); +#98600 = LINE('',#98601,#98602); +#98601 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98602 = VECTOR('',#98603,1.); +#98603 = DIRECTION('',(-0.,-0.,-1.)); +#98604 = ORIENTED_EDGE('',*,*,#98468,.F.); +#98605 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98606,#98607) + ,(#98608,#98609) + ,(#98610,#98611) + ,(#98612,#98613 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98606 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.251)); +#98607 = CARTESIAN_POINT('',(-1.028074198226,1.100225930702,3.25)); +#98608 = CARTESIAN_POINT('',(-1.05872106281,1.071684575899,3.251)); +#98609 = CARTESIAN_POINT('',(-1.05872106281,1.071684575899,3.25)); +#98610 = CARTESIAN_POINT('',(-1.074083486023,1.033785399849,3.251)); +#98611 = CARTESIAN_POINT('',(-1.074083486023,1.033785399849,3.25)); +#98612 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98613 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.25)); +#98614 = ADVANCED_FACE('',(#98615),#98626,.F.); +#98615 = FACE_BOUND('',#98616,.F.); +#98616 = EDGE_LOOP('',(#98617,#98618,#98619,#98625)); +#98617 = ORIENTED_EDGE('',*,*,#98599,.F.); +#98618 = ORIENTED_EDGE('',*,*,#98322,.T.); +#98619 = ORIENTED_EDGE('',*,*,#98620,.T.); +#98620 = EDGE_CURVE('',#98323,#98451,#98621,.T.); +#98621 = LINE('',#98622,#98623); +#98622 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98623 = VECTOR('',#98624,1.); +#98624 = DIRECTION('',(-0.,-0.,-1.)); +#98625 = ORIENTED_EDGE('',*,*,#98459,.F.); +#98626 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98627,#98628) + ,(#98629,#98630) + ,(#98631,#98632) + ,(#98633,#98634 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98627 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.251)); +#98628 = CARTESIAN_POINT('',(-1.074083486023,0.986528402552,3.25)); +#98629 = CARTESIAN_POINT('',(-1.074083486023,0.941298933194,3.251)); +#98630 = CARTESIAN_POINT('',(-1.074083486023,0.941298933194,3.25)); +#98631 = CARTESIAN_POINT('',(-1.05872106281,0.905271321393,3.251)); +#98632 = CARTESIAN_POINT('',(-1.05872106281,0.905271321393,3.25)); +#98633 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98634 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.25)); +#98635 = ADVANCED_FACE('',(#98636),#98647,.F.); +#98636 = FACE_BOUND('',#98637,.F.); +#98637 = EDGE_LOOP('',(#98638,#98639,#98640,#98646)); +#98638 = ORIENTED_EDGE('',*,*,#98620,.F.); +#98639 = ORIENTED_EDGE('',*,*,#98331,.T.); +#98640 = ORIENTED_EDGE('',*,*,#98641,.T.); +#98641 = EDGE_CURVE('',#98332,#98443,#98642,.T.); +#98642 = LINE('',#98643,#98644); +#98643 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.251)); +#98644 = VECTOR('',#98645,1.); +#98645 = DIRECTION('',(-0.,-0.,-1.)); +#98646 = ORIENTED_EDGE('',*,*,#98450,.F.); +#98647 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98648,#98649) + ,(#98650,#98651) + ,(#98652,#98653) + ,(#98654,#98655 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98648 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.251)); +#98649 = CARTESIAN_POINT('',(-1.028074198226,0.878289603464,3.25)); +#98650 = CARTESIAN_POINT('',(-0.997427333642,0.851307885535,3.251)); +#98651 = CARTESIAN_POINT('',(-0.997427333642,0.851307885535,3.25)); +#98652 = CARTESIAN_POINT('',(-0.958982284686,0.837895008415,3.251)); +#98653 = CARTESIAN_POINT('',(-0.958982284686,0.837895008415,3.25)); +#98654 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.251)); +#98655 = CARTESIAN_POINT('',(-0.912739051359,0.837895008415,3.25)); +#98656 = ADVANCED_FACE('',(#98657),#98668,.F.); +#98657 = FACE_BOUND('',#98658,.T.); +#98658 = EDGE_LOOP('',(#98659,#98660,#98666,#98667)); +#98659 = ORIENTED_EDGE('',*,*,#98442,.T.); +#98660 = ORIENTED_EDGE('',*,*,#98661,.F.); +#98661 = EDGE_CURVE('',#98341,#98435,#98662,.T.); +#98662 = LINE('',#98663,#98664); +#98663 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.251)); +#98664 = VECTOR('',#98665,1.); +#98665 = DIRECTION('',(-0.,-0.,-1.)); +#98666 = ORIENTED_EDGE('',*,*,#98340,.F.); +#98667 = ORIENTED_EDGE('',*,*,#98641,.T.); +#98668 = PLANE('',#98669); +#98669 = AXIS2_PLACEMENT_3D('',#98670,#98671,#98672); +#98670 = CARTESIAN_POINT('',(-0.825711313763,0.837895008415,3.251)); +#98671 = DIRECTION('',(-6.229061000724E-15,1.,0.)); +#98672 = DIRECTION('',(-1.,-6.229061000724E-15,0.)); +#98673 = ADVANCED_FACE('',(#98674),#98680,.F.); +#98674 = FACE_BOUND('',#98675,.T.); +#98675 = EDGE_LOOP('',(#98676,#98677,#98678,#98679)); +#98676 = ORIENTED_EDGE('',*,*,#98434,.T.); +#98677 = ORIENTED_EDGE('',*,*,#98562,.F.); +#98678 = ORIENTED_EDGE('',*,*,#98348,.F.); +#98679 = ORIENTED_EDGE('',*,*,#98661,.T.); +#98680 = PLANE('',#98681); +#98681 = AXIS2_PLACEMENT_3D('',#98682,#98683,#98684); +#98682 = CARTESIAN_POINT('',(-0.825711313763,1.142959981062,3.251)); +#98683 = DIRECTION('',(-1.,-7.108008258556E-15,0.)); +#98684 = DIRECTION('',(7.108008258556E-15,-1.,0.)); +#98685 = ADVANCED_FACE('',(#98686),#98702,.T.); +#98686 = FACE_BOUND('',#98687,.T.); +#98687 = EDGE_LOOP('',(#98688,#98689,#98695,#98696)); +#98688 = ORIENTED_EDGE('',*,*,#98486,.F.); +#98689 = ORIENTED_EDGE('',*,*,#98690,.F.); +#98690 = EDGE_CURVE('',#98367,#98487,#98691,.T.); +#98691 = LINE('',#98692,#98693); +#98692 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98693 = VECTOR('',#98694,1.); +#98694 = DIRECTION('',(-0.,-0.,-1.)); +#98695 = ORIENTED_EDGE('',*,*,#98366,.T.); +#98696 = ORIENTED_EDGE('',*,*,#98697,.T.); +#98697 = EDGE_CURVE('',#98357,#98489,#98698,.T.); +#98698 = LINE('',#98699,#98700); +#98699 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.251)); +#98700 = VECTOR('',#98701,1.); +#98701 = DIRECTION('',(-0.,-0.,-1.)); +#98702 = PLANE('',#98703); +#98703 = AXIS2_PLACEMENT_3D('',#98704,#98705,#98706); +#98704 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98705 = DIRECTION('',(-9.409992659565E-15,1.,0.)); +#98706 = DIRECTION('',(-1.,-9.409992659565E-15,0.)); +#98707 = ADVANCED_FACE('',(#98708),#98719,.T.); +#98708 = FACE_BOUND('',#98709,.T.); +#98709 = EDGE_LOOP('',(#98710,#98711,#98712,#98713)); +#98710 = ORIENTED_EDGE('',*,*,#98496,.F.); +#98711 = ORIENTED_EDGE('',*,*,#98697,.F.); +#98712 = ORIENTED_EDGE('',*,*,#98356,.T.); +#98713 = ORIENTED_EDGE('',*,*,#98714,.T.); +#98714 = EDGE_CURVE('',#98359,#98497,#98715,.T.); +#98715 = LINE('',#98716,#98717); +#98716 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.251)); +#98717 = VECTOR('',#98718,1.); +#98718 = DIRECTION('',(-0.,-0.,-1.)); +#98719 = PLANE('',#98720); +#98720 = AXIS2_PLACEMENT_3D('',#98721,#98722,#98723); +#98721 = CARTESIAN_POINT('',(-0.865092144844,0.87298683809,3.251)); +#98722 = DIRECTION('',(-1.,-7.375736951567E-15,0.)); +#98723 = DIRECTION('',(7.375736951567E-15,-1.,0.)); +#98724 = ADVANCED_FACE('',(#98725),#98736,.T.); +#98725 = FACE_BOUND('',#98726,.T.); +#98726 = EDGE_LOOP('',(#98727,#98728,#98729,#98730)); +#98727 = ORIENTED_EDGE('',*,*,#98504,.F.); +#98728 = ORIENTED_EDGE('',*,*,#98714,.F.); +#98729 = ORIENTED_EDGE('',*,*,#98410,.T.); +#98730 = ORIENTED_EDGE('',*,*,#98731,.T.); +#98731 = EDGE_CURVE('',#98402,#98505,#98732,.T.); +#98732 = LINE('',#98733,#98734); +#98733 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.251)); +#98734 = VECTOR('',#98735,1.); +#98735 = DIRECTION('',(-0.,-0.,-1.)); +#98736 = PLANE('',#98737); +#98737 = AXIS2_PLACEMENT_3D('',#98738,#98739,#98740); +#98738 = CARTESIAN_POINT('',(-0.865092144844,1.108180078761,3.251)); +#98739 = DIRECTION('',(9.791031094295E-15,-1.,0.)); +#98740 = DIRECTION('',(1.,9.791031094295E-15,0.)); +#98741 = ADVANCED_FACE('',(#98742),#98753,.T.); +#98742 = FACE_BOUND('',#98743,.T.); +#98743 = EDGE_LOOP('',(#98744,#98745,#98746,#98747)); +#98744 = ORIENTED_EDGE('',*,*,#98512,.F.); +#98745 = ORIENTED_EDGE('',*,*,#98731,.F.); +#98746 = ORIENTED_EDGE('',*,*,#98401,.T.); +#98747 = ORIENTED_EDGE('',*,*,#98748,.T.); +#98748 = EDGE_CURVE('',#98393,#98513,#98749,.T.); +#98749 = LINE('',#98750,#98751); +#98750 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98751 = VECTOR('',#98752,1.); +#98752 = DIRECTION('',(-0.,-0.,-1.)); +#98753 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98754,#98755) + ,(#98756,#98757) + ,(#98758,#98759) + ,(#98760,#98761 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98754 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.251)); +#98755 = CARTESIAN_POINT('',(-0.909385832078,1.108180078761,3.25)); +#98756 = CARTESIAN_POINT('',(-0.948142808409,1.108180078761,3.251)); +#98757 = CARTESIAN_POINT('',(-0.948142808409,1.108180078761,3.25)); +#98758 = CARTESIAN_POINT('',(-0.978399763774,1.097574548015,3.251)); +#98759 = CARTESIAN_POINT('',(-0.978399763774,1.097574548015,3.25)); +#98760 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98761 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.25)); +#98762 = ADVANCED_FACE('',(#98763),#98774,.T.); +#98763 = FACE_BOUND('',#98764,.T.); +#98764 = EDGE_LOOP('',(#98765,#98766,#98767,#98768)); +#98765 = ORIENTED_EDGE('',*,*,#98521,.F.); +#98766 = ORIENTED_EDGE('',*,*,#98748,.F.); +#98767 = ORIENTED_EDGE('',*,*,#98392,.T.); +#98768 = ORIENTED_EDGE('',*,*,#98769,.T.); +#98769 = EDGE_CURVE('',#98384,#98522,#98770,.T.); +#98770 = LINE('',#98771,#98772); +#98771 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98772 = VECTOR('',#98773,1.); +#98773 = DIRECTION('',(-0.,-0.,-1.)); +#98774 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98775,#98776) + ,(#98777,#98778) + ,(#98779,#98780) + ,(#98781,#98782 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98775 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.251)); +#98776 = CARTESIAN_POINT('',(-1.00007871633,1.076363486523,3.25)); +#98777 = CARTESIAN_POINT('',(-1.021835650729,1.055308388717,3.251)); +#98778 = CARTESIAN_POINT('',(-1.021835650729,1.055308388717,3.25)); +#98779 = CARTESIAN_POINT('',(-1.032675127007,1.025675288102,3.251)); +#98780 = CARTESIAN_POINT('',(-1.032675127007,1.025675288102,3.25)); +#98781 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98782 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.25)); +#98783 = ADVANCED_FACE('',(#98784),#98795,.T.); +#98784 = FACE_BOUND('',#98785,.T.); +#98785 = EDGE_LOOP('',(#98786,#98787,#98788,#98789)); +#98786 = ORIENTED_EDGE('',*,*,#98530,.F.); +#98787 = ORIENTED_EDGE('',*,*,#98769,.F.); +#98788 = ORIENTED_EDGE('',*,*,#98383,.T.); +#98789 = ORIENTED_EDGE('',*,*,#98790,.T.); +#98790 = EDGE_CURVE('',#98375,#98531,#98791,.T.); +#98791 = LINE('',#98792,#98793); +#98792 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98793 = VECTOR('',#98794,1.); +#98794 = DIRECTION('',(-0.,-0.,-1.)); +#98795 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98796,#98797) + ,(#98798,#98799) + ,(#98800,#98801) + ,(#98802,#98803 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98796 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.251)); +#98797 = CARTESIAN_POINT('',(-1.032675127007,0.987620148365,3.25)); +#98798 = CARTESIAN_POINT('',(-1.032675127007,0.949565008627,3.251)); +#98799 = CARTESIAN_POINT('',(-1.032675127007,0.949565008627,3.25)); +#98800 = CARTESIAN_POINT('',(-1.021523723352,0.920867690136,3.251)); +#98801 = CARTESIAN_POINT('',(-1.021523723352,0.920867690136,3.25)); +#98802 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98803 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.25)); +#98804 = ADVANCED_FACE('',(#98805),#98811,.T.); +#98805 = FACE_BOUND('',#98806,.T.); +#98806 = EDGE_LOOP('',(#98807,#98808,#98809,#98810)); +#98807 = ORIENTED_EDGE('',*,*,#98539,.F.); +#98808 = ORIENTED_EDGE('',*,*,#98790,.F.); +#98809 = ORIENTED_EDGE('',*,*,#98374,.T.); +#98810 = ORIENTED_EDGE('',*,*,#98690,.T.); +#98811 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#98812,#98813) + ,(#98814,#98815) + ,(#98816,#98817) + ,(#98818,#98819 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#98812 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.251)); +#98813 = CARTESIAN_POINT('',(-0.999220916048,0.901684156581,3.25)); +#98814 = CARTESIAN_POINT('',(-0.976918108741,0.882500623024,3.251)); +#98815 = CARTESIAN_POINT('',(-0.976918108741,0.882500623024,3.25)); +#98816 = CARTESIAN_POINT('',(-0.947518953657,0.87298683809,3.251)); +#98817 = CARTESIAN_POINT('',(-0.947518953657,0.87298683809,3.25)); +#98818 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.251)); +#98819 = CARTESIAN_POINT('',(-0.911179414482,0.87298683809,3.25)); +#98820 = MANIFOLD_SOLID_BREP('',#98821); +#98821 = CLOSED_SHELL('',(#98822,#98946,#99070,#99092,#99109,#99126, + #99143,#99160,#99177,#99194,#99206,#99228,#99245,#99266,#99283, + #99304)); +#98822 = ADVANCED_FACE('',(#98823,#98889),#98941,.F.); +#98823 = FACE_BOUND('',#98824,.T.); +#98824 = EDGE_LOOP('',(#98825,#98835,#98843,#98851,#98859,#98867,#98875, + #98883)); +#98825 = ORIENTED_EDGE('',*,*,#98826,.T.); +#98826 = EDGE_CURVE('',#98827,#98829,#98831,.T.); +#98827 = VERTEX_POINT('',#98828); +#98828 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.251)); +#98829 = VERTEX_POINT('',#98830); +#98830 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.251)); +#98831 = LINE('',#98832,#98833); +#98832 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.251)); +#98833 = VECTOR('',#98834,1.); +#98834 = DIRECTION('',(0.35593572437,-0.934510438742,-0.)); +#98835 = ORIENTED_EDGE('',*,*,#98836,.T.); +#98836 = EDGE_CURVE('',#98829,#98837,#98839,.T.); +#98837 = VERTEX_POINT('',#98838); +#98838 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.251)); +#98839 = LINE('',#98840,#98841); +#98840 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.251)); +#98841 = VECTOR('',#98842,1.); +#98842 = DIRECTION('',(1.,7.724035640984E-15,-0.)); +#98843 = ORIENTED_EDGE('',*,*,#98844,.T.); +#98844 = EDGE_CURVE('',#98837,#98845,#98847,.T.); +#98845 = VERTEX_POINT('',#98846); +#98846 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.251)); +#98847 = LINE('',#98848,#98849); +#98848 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.251)); +#98849 = VECTOR('',#98850,1.); +#98850 = DIRECTION('',(0.355935724364,0.934510438744,-0.)); +#98851 = ORIENTED_EDGE('',*,*,#98852,.T.); +#98852 = EDGE_CURVE('',#98845,#98853,#98855,.T.); +#98853 = VERTEX_POINT('',#98854); +#98854 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.251)); +#98855 = LINE('',#98856,#98857); +#98856 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.251)); +#98857 = VECTOR('',#98858,1.); +#98858 = DIRECTION('',(-1.,-4.983248800818E-15,-0.)); +#98859 = ORIENTED_EDGE('',*,*,#98860,.T.); +#98860 = EDGE_CURVE('',#98853,#98861,#98863,.T.); +#98861 = VERTEX_POINT('',#98862); +#98862 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.251)); +#98863 = LINE('',#98864,#98865); +#98864 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.251)); +#98865 = VECTOR('',#98866,1.); +#98866 = DIRECTION('',(-0.33152841835,-0.943445233082,-0.)); +#98867 = ORIENTED_EDGE('',*,*,#98868,.T.); +#98868 = EDGE_CURVE('',#98861,#98869,#98871,.T.); +#98869 = VERTEX_POINT('',#98870); +#98870 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.251)); +#98871 = LINE('',#98872,#98873); +#98872 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.251)); +#98873 = VECTOR('',#98874,1.); +#98874 = DIRECTION('',(-1.,-6.827876809641E-15,-0.)); +#98875 = ORIENTED_EDGE('',*,*,#98876,.T.); +#98876 = EDGE_CURVE('',#98869,#98877,#98879,.T.); +#98877 = VERTEX_POINT('',#98878); +#98878 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.251)); +#98879 = LINE('',#98880,#98881); +#98880 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.251)); +#98881 = VECTOR('',#98882,1.); +#98882 = DIRECTION('',(-0.349395479469,0.936975345954,-0.)); +#98883 = ORIENTED_EDGE('',*,*,#98884,.T.); +#98884 = EDGE_CURVE('',#98877,#98827,#98885,.T.); +#98885 = LINE('',#98886,#98887); +#98886 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.251)); +#98887 = VECTOR('',#98888,1.); +#98888 = DIRECTION('',(-1.,-4.983248800579E-15,-0.)); +#98889 = FACE_BOUND('',#98890,.T.); +#98890 = EDGE_LOOP('',(#98891,#98901,#98909,#98918,#98926,#98935)); +#98891 = ORIENTED_EDGE('',*,*,#98892,.F.); +#98892 = EDGE_CURVE('',#98893,#98895,#98897,.T.); +#98893 = VERTEX_POINT('',#98894); +#98894 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.251)); +#98895 = VERTEX_POINT('',#98896); +#98896 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.251)); +#98897 = LINE('',#98898,#98899); +#98898 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.251)); +#98899 = VECTOR('',#98900,1.); +#98900 = DIRECTION('',(-1.,-6.353357572163E-15,0.)); +#98901 = ORIENTED_EDGE('',*,*,#98902,.F.); +#98902 = EDGE_CURVE('',#98903,#98893,#98905,.T.); +#98903 = VERTEX_POINT('',#98904); +#98904 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#98905 = LINE('',#98906,#98907); +#98906 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#98907 = VECTOR('',#98908,1.); +#98908 = DIRECTION('',(0.338535034314,0.940953787676,0.)); +#98909 = ORIENTED_EDGE('',*,*,#98910,.F.); +#98910 = EDGE_CURVE('',#98911,#98903,#98913,.T.); +#98911 = VERTEX_POINT('',#98912); +#98912 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.251)); +#98913 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98914,#98915,#98916,#98917), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#98914 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.251)); +#98915 = CARTESIAN_POINT('',(-1.22544624469,0.886087787836,3.251)); +#98916 = CARTESIAN_POINT('',(-1.223808625972,0.893262117458,3.251)); +#98917 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#98918 = ORIENTED_EDGE('',*,*,#98919,.F.); +#98919 = EDGE_CURVE('',#98920,#98911,#98922,.T.); +#98920 = VERTEX_POINT('',#98921); +#98921 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#98922 = LINE('',#98923,#98924); +#98923 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#98924 = VECTOR('',#98925,1.); +#98925 = DIRECTION('',(1.,0.,0.)); +#98926 = ORIENTED_EDGE('',*,*,#98927,.F.); +#98927 = EDGE_CURVE('',#98928,#98920,#98930,.T.); +#98928 = VERTEX_POINT('',#98929); +#98929 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.251)); +#98930 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#98931,#98932,#98933,#98934), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#98931 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.251)); +#98932 = CARTESIAN_POINT('',(-1.231138919282,0.894041935897,3.251)); +#98933 = CARTESIAN_POINT('',(-1.229579282407,0.887023569961,3.251)); +#98934 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#98935 = ORIENTED_EDGE('',*,*,#98936,.F.); +#98936 = EDGE_CURVE('',#98895,#98928,#98937,.T.); +#98937 = LINE('',#98938,#98939); +#98938 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.251)); +#98939 = VECTOR('',#98940,1.); +#98940 = DIRECTION('',(0.341603830682,-0.939844041777,0.)); +#98941 = PLANE('',#98942); +#98942 = AXIS2_PLACEMENT_3D('',#98943,#98944,#98945); +#98943 = CARTESIAN_POINT('',(0.,0.,3.251)); +#98944 = DIRECTION('',(0.,0.,-1.)); +#98945 = DIRECTION('',(-1.,0.,-0.)); +#98946 = ADVANCED_FACE('',(#98947,#99013),#99065,.T.); +#98947 = FACE_BOUND('',#98948,.T.); +#98948 = EDGE_LOOP('',(#98949,#98959,#98967,#98975,#98983,#98991,#98999, + #99007)); +#98949 = ORIENTED_EDGE('',*,*,#98950,.F.); +#98950 = EDGE_CURVE('',#98951,#98953,#98955,.T.); +#98951 = VERTEX_POINT('',#98952); +#98952 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.25)); +#98953 = VERTEX_POINT('',#98954); +#98954 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.25)); +#98955 = LINE('',#98956,#98957); +#98956 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.25)); +#98957 = VECTOR('',#98958,1.); +#98958 = DIRECTION('',(0.35593572437,-0.934510438742,-0.)); +#98959 = ORIENTED_EDGE('',*,*,#98960,.F.); +#98960 = EDGE_CURVE('',#98961,#98951,#98963,.T.); +#98961 = VERTEX_POINT('',#98962); +#98962 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.25)); +#98963 = LINE('',#98964,#98965); +#98964 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.25)); +#98965 = VECTOR('',#98966,1.); +#98966 = DIRECTION('',(-1.,-4.983248800579E-15,-0.)); +#98967 = ORIENTED_EDGE('',*,*,#98968,.F.); +#98968 = EDGE_CURVE('',#98969,#98961,#98971,.T.); +#98969 = VERTEX_POINT('',#98970); +#98970 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.25)); +#98971 = LINE('',#98972,#98973); +#98972 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.25)); +#98973 = VECTOR('',#98974,1.); +#98974 = DIRECTION('',(-0.349395479469,0.936975345954,-0.)); +#98975 = ORIENTED_EDGE('',*,*,#98976,.F.); +#98976 = EDGE_CURVE('',#98977,#98969,#98979,.T.); +#98977 = VERTEX_POINT('',#98978); +#98978 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.25)); +#98979 = LINE('',#98980,#98981); +#98980 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.25)); +#98981 = VECTOR('',#98982,1.); +#98982 = DIRECTION('',(-1.,-6.827876809641E-15,-0.)); +#98983 = ORIENTED_EDGE('',*,*,#98984,.F.); +#98984 = EDGE_CURVE('',#98985,#98977,#98987,.T.); +#98985 = VERTEX_POINT('',#98986); +#98986 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.25)); +#98987 = LINE('',#98988,#98989); +#98988 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.25)); +#98989 = VECTOR('',#98990,1.); +#98990 = DIRECTION('',(-0.33152841835,-0.943445233082,-0.)); +#98991 = ORIENTED_EDGE('',*,*,#98992,.F.); +#98992 = EDGE_CURVE('',#98993,#98985,#98995,.T.); +#98993 = VERTEX_POINT('',#98994); +#98994 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.25)); +#98995 = LINE('',#98996,#98997); +#98996 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.25)); +#98997 = VECTOR('',#98998,1.); +#98998 = DIRECTION('',(-1.,-4.983248800818E-15,-0.)); +#98999 = ORIENTED_EDGE('',*,*,#99000,.F.); +#99000 = EDGE_CURVE('',#99001,#98993,#99003,.T.); +#99001 = VERTEX_POINT('',#99002); +#99002 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.25)); +#99003 = LINE('',#99004,#99005); +#99004 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.25)); +#99005 = VECTOR('',#99006,1.); +#99006 = DIRECTION('',(0.355935724364,0.934510438744,-0.)); +#99007 = ORIENTED_EDGE('',*,*,#99008,.F.); +#99008 = EDGE_CURVE('',#98953,#99001,#99009,.T.); +#99009 = LINE('',#99010,#99011); +#99010 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.25)); +#99011 = VECTOR('',#99012,1.); +#99012 = DIRECTION('',(1.,7.724035640984E-15,-0.)); +#99013 = FACE_BOUND('',#99014,.T.); +#99014 = EDGE_LOOP('',(#99015,#99025,#99033,#99041,#99050,#99058)); +#99015 = ORIENTED_EDGE('',*,*,#99016,.T.); +#99016 = EDGE_CURVE('',#99017,#99019,#99021,.T.); +#99017 = VERTEX_POINT('',#99018); +#99018 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.25)); +#99019 = VERTEX_POINT('',#99020); +#99020 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.25)); +#99021 = LINE('',#99022,#99023); +#99022 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.25)); +#99023 = VECTOR('',#99024,1.); +#99024 = DIRECTION('',(0.338535034314,0.940953787676,0.)); +#99025 = ORIENTED_EDGE('',*,*,#99026,.T.); +#99026 = EDGE_CURVE('',#99019,#99027,#99029,.T.); +#99027 = VERTEX_POINT('',#99028); +#99028 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.25)); +#99029 = LINE('',#99030,#99031); +#99030 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.25)); +#99031 = VECTOR('',#99032,1.); +#99032 = DIRECTION('',(-1.,-6.353357572163E-15,0.)); +#99033 = ORIENTED_EDGE('',*,*,#99034,.T.); +#99034 = EDGE_CURVE('',#99027,#99035,#99037,.T.); +#99035 = VERTEX_POINT('',#99036); +#99036 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.25)); +#99037 = LINE('',#99038,#99039); +#99038 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.25)); +#99039 = VECTOR('',#99040,1.); +#99040 = DIRECTION('',(0.341603830682,-0.939844041777,0.)); +#99041 = ORIENTED_EDGE('',*,*,#99042,.T.); +#99042 = EDGE_CURVE('',#99035,#99043,#99045,.T.); +#99043 = VERTEX_POINT('',#99044); +#99044 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.25)); +#99045 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99046,#99047,#99048,#99049), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#99046 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.25)); +#99047 = CARTESIAN_POINT('',(-1.231138919282,0.894041935897,3.25)); +#99048 = CARTESIAN_POINT('',(-1.229579282407,0.887023569961,3.25)); +#99049 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.25)); +#99050 = ORIENTED_EDGE('',*,*,#99051,.T.); +#99051 = EDGE_CURVE('',#99043,#99052,#99054,.T.); +#99052 = VERTEX_POINT('',#99053); +#99053 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.25)); +#99054 = LINE('',#99055,#99056); +#99055 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.25)); +#99056 = VECTOR('',#99057,1.); +#99057 = DIRECTION('',(1.,0.,0.)); +#99058 = ORIENTED_EDGE('',*,*,#99059,.T.); +#99059 = EDGE_CURVE('',#99052,#99017,#99060,.T.); +#99060 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99061,#99062,#99063,#99064), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#99061 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.25)); +#99062 = CARTESIAN_POINT('',(-1.22544624469,0.886087787836,3.25)); +#99063 = CARTESIAN_POINT('',(-1.223808625972,0.893262117458,3.25)); +#99064 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.25)); +#99065 = PLANE('',#99066); +#99066 = AXIS2_PLACEMENT_3D('',#99067,#99068,#99069); +#99067 = CARTESIAN_POINT('',(0.,0.,3.25)); +#99068 = DIRECTION('',(0.,0.,-1.)); +#99069 = DIRECTION('',(-1.,0.,-0.)); +#99070 = ADVANCED_FACE('',(#99071),#99087,.F.); +#99071 = FACE_BOUND('',#99072,.T.); +#99072 = EDGE_LOOP('',(#99073,#99074,#99080,#99081)); +#99073 = ORIENTED_EDGE('',*,*,#98950,.T.); +#99074 = ORIENTED_EDGE('',*,*,#99075,.F.); +#99075 = EDGE_CURVE('',#98829,#98953,#99076,.T.); +#99076 = LINE('',#99077,#99078); +#99077 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.251)); +#99078 = VECTOR('',#99079,1.); +#99079 = DIRECTION('',(-0.,-0.,-1.)); +#99080 = ORIENTED_EDGE('',*,*,#98826,.F.); +#99081 = ORIENTED_EDGE('',*,*,#99082,.T.); +#99082 = EDGE_CURVE('',#98827,#98951,#99083,.T.); +#99083 = LINE('',#99084,#99085); +#99084 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.251)); +#99085 = VECTOR('',#99086,1.); +#99086 = DIRECTION('',(-0.,-0.,-1.)); +#99087 = PLANE('',#99088); +#99088 = AXIS2_PLACEMENT_3D('',#99089,#99090,#99091); +#99089 = CARTESIAN_POINT('',(-1.24930868887,0.837895008415,3.251)); +#99090 = DIRECTION('',(0.934510438742,0.35593572437,-0.)); +#99091 = DIRECTION('',(-0.35593572437,0.934510438742,0.)); +#99092 = ADVANCED_FACE('',(#99093),#99104,.F.); +#99093 = FACE_BOUND('',#99094,.T.); +#99094 = EDGE_LOOP('',(#99095,#99096,#99102,#99103)); +#99095 = ORIENTED_EDGE('',*,*,#99008,.T.); +#99096 = ORIENTED_EDGE('',*,*,#99097,.F.); +#99097 = EDGE_CURVE('',#98837,#99001,#99098,.T.); +#99098 = LINE('',#99099,#99100); +#99099 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.251)); +#99100 = VECTOR('',#99101,1.); +#99101 = DIRECTION('',(-0.,-0.,-1.)); +#99102 = ORIENTED_EDGE('',*,*,#98836,.F.); +#99103 = ORIENTED_EDGE('',*,*,#99075,.T.); +#99104 = PLANE('',#99105); +#99105 = AXIS2_PLACEMENT_3D('',#99106,#99107,#99108); +#99106 = CARTESIAN_POINT('',(-1.207198493259,0.837895008415,3.251)); +#99107 = DIRECTION('',(-7.724035640984E-15,1.,0.)); +#99108 = DIRECTION('',(-1.,-7.724035640984E-15,0.)); +#99109 = ADVANCED_FACE('',(#99110),#99121,.F.); +#99110 = FACE_BOUND('',#99111,.T.); +#99111 = EDGE_LOOP('',(#99112,#99113,#99119,#99120)); +#99112 = ORIENTED_EDGE('',*,*,#99000,.T.); +#99113 = ORIENTED_EDGE('',*,*,#99114,.F.); +#99114 = EDGE_CURVE('',#98845,#98993,#99115,.T.); +#99115 = LINE('',#99116,#99117); +#99116 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.251)); +#99117 = VECTOR('',#99118,1.); +#99118 = DIRECTION('',(-0.,-0.,-1.)); +#99119 = ORIENTED_EDGE('',*,*,#98844,.F.); +#99120 = ORIENTED_EDGE('',*,*,#99097,.T.); +#99121 = PLANE('',#99122); +#99122 = AXIS2_PLACEMENT_3D('',#99123,#99124,#99125); +#99123 = CARTESIAN_POINT('',(-1.091005546112,1.142959981062,3.251)); +#99124 = DIRECTION('',(-0.934510438744,0.355935724364,0.)); +#99125 = DIRECTION('',(-0.355935724364,-0.934510438744,0.)); +#99126 = ADVANCED_FACE('',(#99127),#99138,.F.); +#99127 = FACE_BOUND('',#99128,.T.); +#99128 = EDGE_LOOP('',(#99129,#99130,#99136,#99137)); +#99129 = ORIENTED_EDGE('',*,*,#98992,.T.); +#99130 = ORIENTED_EDGE('',*,*,#99131,.F.); +#99131 = EDGE_CURVE('',#98853,#98985,#99132,.T.); +#99132 = LINE('',#99133,#99134); +#99133 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.251)); +#99134 = VECTOR('',#99135,1.); +#99135 = DIRECTION('',(-0.,-0.,-1.)); +#99136 = ORIENTED_EDGE('',*,*,#98852,.F.); +#99137 = ORIENTED_EDGE('',*,*,#99114,.T.); +#99138 = PLANE('',#99139); +#99139 = AXIS2_PLACEMENT_3D('',#99140,#99141,#99142); +#99140 = CARTESIAN_POINT('',(-1.134519414908,1.142959981062,3.251)); +#99141 = DIRECTION('',(4.983248800818E-15,-1.,0.)); +#99142 = DIRECTION('',(1.,4.983248800818E-15,0.)); +#99143 = ADVANCED_FACE('',(#99144),#99155,.F.); +#99144 = FACE_BOUND('',#99145,.T.); +#99145 = EDGE_LOOP('',(#99146,#99147,#99153,#99154)); +#99146 = ORIENTED_EDGE('',*,*,#98984,.T.); +#99147 = ORIENTED_EDGE('',*,*,#99148,.F.); +#99148 = EDGE_CURVE('',#98861,#98977,#99149,.T.); +#99149 = LINE('',#99150,#99151); +#99150 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.251)); +#99151 = VECTOR('',#99152,1.); +#99152 = DIRECTION('',(-0.,-0.,-1.)); +#99153 = ORIENTED_EDGE('',*,*,#98860,.F.); +#99154 = ORIENTED_EDGE('',*,*,#99131,.T.); +#99155 = PLANE('',#99156); +#99156 = AXIS2_PLACEMENT_3D('',#99157,#99158,#99159); +#99157 = CARTESIAN_POINT('',(-1.163840588148,1.059519408277,3.251)); +#99158 = DIRECTION('',(0.943445233082,-0.33152841835,0.)); +#99159 = DIRECTION('',(0.33152841835,0.943445233082,0.)); +#99160 = ADVANCED_FACE('',(#99161),#99172,.F.); +#99161 = FACE_BOUND('',#99162,.T.); +#99162 = EDGE_LOOP('',(#99163,#99164,#99170,#99171)); +#99163 = ORIENTED_EDGE('',*,*,#98976,.T.); +#99164 = ORIENTED_EDGE('',*,*,#99165,.F.); +#99165 = EDGE_CURVE('',#98869,#98969,#99166,.T.); +#99166 = LINE('',#99167,#99168); +#99167 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.251)); +#99168 = VECTOR('',#99169,1.); +#99169 = DIRECTION('',(-0.,-0.,-1.)); +#99170 = ORIENTED_EDGE('',*,*,#98868,.F.); +#99171 = ORIENTED_EDGE('',*,*,#99148,.T.); +#99172 = PLANE('',#99173); +#99173 = AXIS2_PLACEMENT_3D('',#99174,#99175,#99176); +#99174 = CARTESIAN_POINT('',(-1.290873011575,1.059519408277,3.251)); +#99175 = DIRECTION('',(6.827876809641E-15,-1.,0.)); +#99176 = DIRECTION('',(1.,6.827876809641E-15,0.)); +#99177 = ADVANCED_FACE('',(#99178),#99189,.F.); +#99178 = FACE_BOUND('',#99179,.T.); +#99179 = EDGE_LOOP('',(#99180,#99181,#99187,#99188)); +#99180 = ORIENTED_EDGE('',*,*,#98968,.T.); +#99181 = ORIENTED_EDGE('',*,*,#99182,.F.); +#99182 = EDGE_CURVE('',#98877,#98961,#99183,.T.); +#99183 = LINE('',#99184,#99185); +#99184 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.251)); +#99185 = VECTOR('',#99186,1.); +#99186 = DIRECTION('',(-0.,-0.,-1.)); +#99187 = ORIENTED_EDGE('',*,*,#98876,.F.); +#99188 = ORIENTED_EDGE('',*,*,#99165,.T.); +#99189 = PLANE('',#99190); +#99190 = AXIS2_PLACEMENT_3D('',#99191,#99192,#99193); +#99191 = CARTESIAN_POINT('',(-1.321987767221,1.142959981062,3.251)); +#99192 = DIRECTION('',(-0.936975345954,-0.349395479469,0.)); +#99193 = DIRECTION('',(0.349395479469,-0.936975345954,0.)); +#99194 = ADVANCED_FACE('',(#99195),#99201,.F.); +#99195 = FACE_BOUND('',#99196,.T.); +#99196 = EDGE_LOOP('',(#99197,#99198,#99199,#99200)); +#99197 = ORIENTED_EDGE('',*,*,#98960,.T.); +#99198 = ORIENTED_EDGE('',*,*,#99082,.F.); +#99199 = ORIENTED_EDGE('',*,*,#98884,.F.); +#99200 = ORIENTED_EDGE('',*,*,#99182,.T.); +#99201 = PLANE('',#99202); +#99202 = AXIS2_PLACEMENT_3D('',#99203,#99204,#99205); +#99203 = CARTESIAN_POINT('',(-1.365501636019,1.142959981062,3.251)); +#99204 = DIRECTION('',(4.983248800579E-15,-1.,0.)); +#99205 = DIRECTION('',(1.,4.983248800579E-15,0.)); +#99206 = ADVANCED_FACE('',(#99207),#99223,.T.); +#99207 = FACE_BOUND('',#99208,.T.); +#99208 = EDGE_LOOP('',(#99209,#99210,#99216,#99217)); +#99209 = ORIENTED_EDGE('',*,*,#99026,.F.); +#99210 = ORIENTED_EDGE('',*,*,#99211,.F.); +#99211 = EDGE_CURVE('',#98893,#99019,#99212,.T.); +#99212 = LINE('',#99213,#99214); +#99213 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.251)); +#99214 = VECTOR('',#99215,1.); +#99215 = DIRECTION('',(-0.,-0.,-1.)); +#99216 = ORIENTED_EDGE('',*,*,#98892,.T.); +#99217 = ORIENTED_EDGE('',*,*,#99218,.T.); +#99218 = EDGE_CURVE('',#98895,#99027,#99219,.T.); +#99219 = LINE('',#99220,#99221); +#99220 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.251)); +#99221 = VECTOR('',#99222,1.); +#99222 = DIRECTION('',(-0.,-0.,-1.)); +#99223 = PLANE('',#99224); +#99224 = AXIS2_PLACEMENT_3D('',#99225,#99226,#99227); +#99225 = CARTESIAN_POINT('',(-1.176317683144,1.025051433351,3.251)); +#99226 = DIRECTION('',(6.353357572163E-15,-1.,0.)); +#99227 = DIRECTION('',(1.,6.353357572163E-15,0.)); +#99228 = ADVANCED_FACE('',(#99229),#99240,.T.); +#99229 = FACE_BOUND('',#99230,.T.); +#99230 = EDGE_LOOP('',(#99231,#99232,#99233,#99234)); +#99231 = ORIENTED_EDGE('',*,*,#99034,.F.); +#99232 = ORIENTED_EDGE('',*,*,#99218,.F.); +#99233 = ORIENTED_EDGE('',*,*,#98936,.T.); +#99234 = ORIENTED_EDGE('',*,*,#99235,.T.); +#99235 = EDGE_CURVE('',#98928,#99035,#99236,.T.); +#99236 = LINE('',#99237,#99238); +#99237 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.251)); +#99238 = VECTOR('',#99239,1.); +#99239 = DIRECTION('',(-0.,-0.,-1.)); +#99240 = PLANE('',#99241); +#99241 = AXIS2_PLACEMENT_3D('',#99242,#99243,#99244); +#99242 = CARTESIAN_POINT('',(-1.278707843953,1.025051433351,3.251)); +#99243 = DIRECTION('',(0.939844041777,0.341603830682,-0.)); +#99244 = DIRECTION('',(-0.341603830682,0.939844041777,0.)); +#99245 = ADVANCED_FACE('',(#99246),#99257,.T.); +#99246 = FACE_BOUND('',#99247,.T.); +#99247 = EDGE_LOOP('',(#99248,#99249,#99250,#99251)); +#99248 = ORIENTED_EDGE('',*,*,#99042,.F.); +#99249 = ORIENTED_EDGE('',*,*,#99235,.F.); +#99250 = ORIENTED_EDGE('',*,*,#98927,.T.); +#99251 = ORIENTED_EDGE('',*,*,#99252,.T.); +#99252 = EDGE_CURVE('',#98920,#99043,#99253,.T.); +#99253 = LINE('',#99254,#99255); +#99254 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#99255 = VECTOR('',#99256,1.); +#99256 = DIRECTION('',(-0.,-0.,-1.)); +#99257 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#99258,#99259) + ,(#99260,#99261) + ,(#99262,#99263) + ,(#99264,#99265 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#99258 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.251)); +#99259 = CARTESIAN_POINT('',(-1.232620574313,0.898252955457,3.25)); +#99260 = CARTESIAN_POINT('',(-1.231138919282,0.894041935897,3.251)); +#99261 = CARTESIAN_POINT('',(-1.231138919282,0.894041935897,3.25)); +#99262 = CARTESIAN_POINT('',(-1.229579282407,0.887023569961,3.251)); +#99263 = CARTESIAN_POINT('',(-1.229579282407,0.887023569961,3.25)); +#99264 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#99265 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.25)); +#99266 = ADVANCED_FACE('',(#99267),#99278,.T.); +#99267 = FACE_BOUND('',#99268,.T.); +#99268 = EDGE_LOOP('',(#99269,#99270,#99271,#99272)); +#99269 = ORIENTED_EDGE('',*,*,#99051,.F.); +#99270 = ORIENTED_EDGE('',*,*,#99252,.F.); +#99271 = ORIENTED_EDGE('',*,*,#98919,.T.); +#99272 = ORIENTED_EDGE('',*,*,#99273,.T.); +#99273 = EDGE_CURVE('',#98911,#99052,#99274,.T.); +#99274 = LINE('',#99275,#99276); +#99275 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.251)); +#99276 = VECTOR('',#99277,1.); +#99277 = DIRECTION('',(-0.,-0.,-1.)); +#99278 = PLANE('',#99279); +#99279 = AXIS2_PLACEMENT_3D('',#99280,#99281,#99282); +#99280 = CARTESIAN_POINT('',(-1.227863681845,0.876885930276,3.251)); +#99281 = DIRECTION('',(0.,1.,0.)); +#99282 = DIRECTION('',(0.,-0.,1.)); +#99283 = ADVANCED_FACE('',(#99284),#99295,.T.); +#99284 = FACE_BOUND('',#99285,.T.); +#99285 = EDGE_LOOP('',(#99286,#99287,#99288,#99289)); +#99286 = ORIENTED_EDGE('',*,*,#99059,.F.); +#99287 = ORIENTED_EDGE('',*,*,#99273,.F.); +#99288 = ORIENTED_EDGE('',*,*,#98910,.T.); +#99289 = ORIENTED_EDGE('',*,*,#99290,.T.); +#99290 = EDGE_CURVE('',#98903,#99017,#99291,.T.); +#99291 = LINE('',#99292,#99293); +#99292 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#99293 = VECTOR('',#99294,1.); +#99294 = DIRECTION('',(-0.,-0.,-1.)); +#99295 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#99296,#99297) + ,(#99298,#99299) + ,(#99300,#99301) + ,(#99302,#99303 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#99296 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.251)); +#99297 = CARTESIAN_POINT('',(-1.226927899722,0.876885930276,3.25)); +#99298 = CARTESIAN_POINT('',(-1.22544624469,0.886087787836,3.251)); +#99299 = CARTESIAN_POINT('',(-1.22544624469,0.886087787836,3.25)); +#99300 = CARTESIAN_POINT('',(-1.223808625972,0.893262117458,3.251)); +#99301 = CARTESIAN_POINT('',(-1.223808625972,0.893262117458,3.25)); +#99302 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#99303 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.25)); +#99304 = ADVANCED_FACE('',(#99305),#99311,.T.); +#99305 = FACE_BOUND('',#99306,.T.); +#99306 = EDGE_LOOP('',(#99307,#99308,#99309,#99310)); +#99307 = ORIENTED_EDGE('',*,*,#99016,.F.); +#99308 = ORIENTED_EDGE('',*,*,#99290,.F.); +#99309 = ORIENTED_EDGE('',*,*,#98902,.T.); +#99310 = ORIENTED_EDGE('',*,*,#99211,.T.); +#99311 = PLANE('',#99312); +#99312 = AXIS2_PLACEMENT_3D('',#99313,#99314,#99315); +#99313 = CARTESIAN_POINT('',(-1.221937061723,0.898252955457,3.251)); +#99314 = DIRECTION('',(-0.940953787676,0.338535034314,0.)); +#99315 = DIRECTION('',(-0.338535034314,-0.940953787676,0.)); +#99316 = MANIFOLD_SOLID_BREP('',#99317); +#99317 = CLOSED_SHELL('',(#99318,#99358,#99389,#99420,#99451,#99482, + #99513,#99544,#99575,#99606,#99637,#99668,#99690,#99710)); +#99318 = ADVANCED_FACE('',(#99319),#99353,.F.); +#99319 = FACE_BOUND('',#99320,.T.); +#99320 = EDGE_LOOP('',(#99321,#99331,#99339,#99347)); +#99321 = ORIENTED_EDGE('',*,*,#99322,.T.); +#99322 = EDGE_CURVE('',#99323,#99325,#99327,.T.); +#99323 = VERTEX_POINT('',#99324); +#99324 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.25)); +#99325 = VERTEX_POINT('',#99326); +#99326 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.25)); +#99327 = LINE('',#99328,#99329); +#99328 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.25)); +#99329 = VECTOR('',#99330,1.); +#99330 = DIRECTION('',(6.234647602585E-15,-1.,-0.)); +#99331 = ORIENTED_EDGE('',*,*,#99332,.F.); +#99332 = EDGE_CURVE('',#99333,#99325,#99335,.T.); +#99333 = VERTEX_POINT('',#99334); +#99334 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.251)); +#99335 = LINE('',#99336,#99337); +#99336 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.251)); +#99337 = VECTOR('',#99338,1.); +#99338 = DIRECTION('',(-0.,-0.,-1.)); +#99339 = ORIENTED_EDGE('',*,*,#99340,.F.); +#99340 = EDGE_CURVE('',#99341,#99333,#99343,.T.); +#99341 = VERTEX_POINT('',#99342); +#99342 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.251)); +#99343 = LINE('',#99344,#99345); +#99344 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.251)); +#99345 = VECTOR('',#99346,1.); +#99346 = DIRECTION('',(6.234647602585E-15,-1.,-0.)); +#99347 = ORIENTED_EDGE('',*,*,#99348,.T.); +#99348 = EDGE_CURVE('',#99341,#99323,#99349,.T.); +#99349 = LINE('',#99350,#99351); +#99350 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.251)); +#99351 = VECTOR('',#99352,1.); +#99352 = DIRECTION('',(-0.,-0.,-1.)); +#99353 = PLANE('',#99354); +#99354 = AXIS2_PLACEMENT_3D('',#99355,#99356,#99357); +#99355 = CARTESIAN_POINT('',(-0.30526048875,1.592135400911,3.251)); +#99356 = DIRECTION('',(1.,6.234647602585E-15,-0.)); +#99357 = DIRECTION('',(-6.234647602585E-15,1.,0.)); +#99358 = ADVANCED_FACE('',(#99359),#99384,.F.); +#99359 = FACE_BOUND('',#99360,.T.); +#99360 = EDGE_LOOP('',(#99361,#99369,#99377,#99383)); +#99361 = ORIENTED_EDGE('',*,*,#99362,.T.); +#99362 = EDGE_CURVE('',#99325,#99363,#99365,.T.); +#99363 = VERTEX_POINT('',#99364); +#99364 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.25)); +#99365 = LINE('',#99366,#99367); +#99366 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.25)); +#99367 = VECTOR('',#99368,1.); +#99368 = DIRECTION('',(1.,6.955979564068E-15,-0.)); +#99369 = ORIENTED_EDGE('',*,*,#99370,.F.); +#99370 = EDGE_CURVE('',#99371,#99363,#99373,.T.); +#99371 = VERTEX_POINT('',#99372); +#99372 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.251)); +#99373 = LINE('',#99374,#99375); +#99374 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.251)); +#99375 = VECTOR('',#99376,1.); +#99376 = DIRECTION('',(-0.,-0.,-1.)); +#99377 = ORIENTED_EDGE('',*,*,#99378,.F.); +#99378 = EDGE_CURVE('',#99333,#99371,#99379,.T.); +#99379 = LINE('',#99380,#99381); +#99380 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.251)); +#99381 = VECTOR('',#99382,1.); +#99382 = DIRECTION('',(1.,6.955979564068E-15,-0.)); +#99383 = ORIENTED_EDGE('',*,*,#99332,.T.); +#99384 = PLANE('',#99385); +#99385 = AXIS2_PLACEMENT_3D('',#99386,#99387,#99388); +#99386 = CARTESIAN_POINT('',(-0.180567520635,1.592135400911,3.251)); +#99387 = DIRECTION('',(-6.955979564068E-15,1.,0.)); +#99388 = DIRECTION('',(-1.,-6.955979564068E-15,0.)); +#99389 = ADVANCED_FACE('',(#99390),#99415,.F.); +#99390 = FACE_BOUND('',#99391,.T.); +#99391 = EDGE_LOOP('',(#99392,#99400,#99408,#99414)); +#99392 = ORIENTED_EDGE('',*,*,#99393,.T.); +#99393 = EDGE_CURVE('',#99363,#99394,#99396,.T.); +#99394 = VERTEX_POINT('',#99395); +#99395 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.25)); +#99396 = LINE('',#99397,#99398); +#99397 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.25)); +#99398 = VECTOR('',#99399,1.); +#99399 = DIRECTION('',(6.338874234249E-15,-1.,-0.)); +#99400 = ORIENTED_EDGE('',*,*,#99401,.F.); +#99401 = EDGE_CURVE('',#99402,#99394,#99404,.T.); +#99402 = VERTEX_POINT('',#99403); +#99403 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.251)); +#99404 = LINE('',#99405,#99406); +#99405 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.251)); +#99406 = VECTOR('',#99407,1.); +#99407 = DIRECTION('',(-0.,-0.,-1.)); +#99408 = ORIENTED_EDGE('',*,*,#99409,.F.); +#99409 = EDGE_CURVE('',#99371,#99402,#99410,.T.); +#99410 = LINE('',#99411,#99412); +#99411 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.251)); +#99412 = VECTOR('',#99413,1.); +#99413 = DIRECTION('',(6.338874234249E-15,-1.,-0.)); +#99414 = ORIENTED_EDGE('',*,*,#99370,.T.); +#99415 = PLANE('',#99416); +#99416 = AXIS2_PLACEMENT_3D('',#99417,#99418,#99419); +#99417 = CARTESIAN_POINT('',(-0.180567520635,1.489511294571,3.251)); +#99418 = DIRECTION('',(1.,6.338874234249E-15,-0.)); +#99419 = DIRECTION('',(-6.338874234249E-15,1.,0.)); +#99420 = ADVANCED_FACE('',(#99421),#99446,.F.); +#99421 = FACE_BOUND('',#99422,.T.); +#99422 = EDGE_LOOP('',(#99423,#99431,#99439,#99445)); +#99423 = ORIENTED_EDGE('',*,*,#99424,.T.); +#99424 = EDGE_CURVE('',#99394,#99425,#99427,.T.); +#99425 = VERTEX_POINT('',#99426); +#99426 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.25)); +#99427 = LINE('',#99428,#99429); +#99428 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.25)); +#99429 = VECTOR('',#99430,1.); +#99430 = DIRECTION('',(-1.,-5.962800923658E-15,-0.)); +#99431 = ORIENTED_EDGE('',*,*,#99432,.F.); +#99432 = EDGE_CURVE('',#99433,#99425,#99435,.T.); +#99433 = VERTEX_POINT('',#99434); +#99434 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.251)); +#99435 = LINE('',#99436,#99437); +#99436 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.251)); +#99437 = VECTOR('',#99438,1.); +#99438 = DIRECTION('',(-0.,-0.,-1.)); +#99439 = ORIENTED_EDGE('',*,*,#99440,.F.); +#99440 = EDGE_CURVE('',#99402,#99433,#99441,.T.); +#99441 = LINE('',#99442,#99443); +#99442 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.251)); +#99443 = VECTOR('',#99444,1.); +#99444 = DIRECTION('',(-1.,-5.962800923658E-15,-0.)); +#99445 = ORIENTED_EDGE('',*,*,#99401,.T.); +#99446 = PLANE('',#99447); +#99447 = AXIS2_PLACEMENT_3D('',#99448,#99449,#99450); +#99448 = CARTESIAN_POINT('',(-0.289664120005,1.489511294571,3.251)); +#99449 = DIRECTION('',(5.962800923658E-15,-1.,0.)); +#99450 = DIRECTION('',(1.,5.962800923658E-15,0.)); +#99451 = ADVANCED_FACE('',(#99452),#99477,.F.); +#99452 = FACE_BOUND('',#99453,.T.); +#99453 = EDGE_LOOP('',(#99454,#99462,#99470,#99476)); +#99454 = ORIENTED_EDGE('',*,*,#99455,.T.); +#99455 = EDGE_CURVE('',#99425,#99456,#99458,.T.); +#99456 = VERTEX_POINT('',#99457); +#99457 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.25)); +#99458 = LINE('',#99459,#99460); +#99459 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.25)); +#99460 = VECTOR('',#99461,1.); +#99461 = DIRECTION('',(6.206814354392E-15,-1.,-0.)); +#99462 = ORIENTED_EDGE('',*,*,#99463,.F.); +#99463 = EDGE_CURVE('',#99464,#99456,#99466,.T.); +#99464 = VERTEX_POINT('',#99465); +#99465 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.251)); +#99466 = LINE('',#99467,#99468); +#99467 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.251)); +#99468 = VECTOR('',#99469,1.); +#99469 = DIRECTION('',(-0.,-0.,-1.)); +#99470 = ORIENTED_EDGE('',*,*,#99471,.F.); +#99471 = EDGE_CURVE('',#99433,#99464,#99472,.T.); +#99472 = LINE('',#99473,#99474); +#99473 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.251)); +#99474 = VECTOR('',#99475,1.); +#99475 = DIRECTION('',(6.206814354392E-15,-1.,-0.)); +#99476 = ORIENTED_EDGE('',*,*,#99432,.T.); +#99477 = PLANE('',#99478); +#99478 = AXIS2_PLACEMENT_3D('',#99479,#99480,#99481); +#99479 = CARTESIAN_POINT('',(-0.289664120005,1.454575428583,3.251)); +#99480 = DIRECTION('',(1.,6.206814354392E-15,-0.)); +#99481 = DIRECTION('',(-6.206814354392E-15,1.,0.)); +#99482 = ADVANCED_FACE('',(#99483),#99508,.F.); +#99483 = FACE_BOUND('',#99484,.T.); +#99484 = EDGE_LOOP('',(#99485,#99493,#99501,#99507)); +#99485 = ORIENTED_EDGE('',*,*,#99486,.T.); +#99486 = EDGE_CURVE('',#99456,#99487,#99489,.T.); +#99487 = VERTEX_POINT('',#99488); +#99488 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.25)); +#99489 = LINE('',#99490,#99491); +#99490 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.25)); +#99491 = VECTOR('',#99492,1.); +#99492 = DIRECTION('',(1.,7.950401231544E-15,-0.)); +#99493 = ORIENTED_EDGE('',*,*,#99494,.F.); +#99494 = EDGE_CURVE('',#99495,#99487,#99497,.T.); +#99495 = VERTEX_POINT('',#99496); +#99496 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.251)); +#99497 = LINE('',#99498,#99499); +#99498 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.251)); +#99499 = VECTOR('',#99500,1.); +#99500 = DIRECTION('',(-0.,-0.,-1.)); +#99501 = ORIENTED_EDGE('',*,*,#99502,.F.); +#99502 = EDGE_CURVE('',#99464,#99495,#99503,.T.); +#99503 = LINE('',#99504,#99505); +#99504 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.251)); +#99505 = VECTOR('',#99506,1.); +#99506 = DIRECTION('',(1.,7.950401231544E-15,-0.)); +#99507 = ORIENTED_EDGE('',*,*,#99463,.T.); +#99508 = PLANE('',#99509); +#99509 = AXIS2_PLACEMENT_3D('',#99510,#99511,#99512); +#99510 = CARTESIAN_POINT('',(-0.180567520635,1.454575428583,3.251)); +#99511 = DIRECTION('',(-7.950401231544E-15,1.,0.)); +#99512 = DIRECTION('',(-1.,-7.950401231544E-15,0.)); +#99513 = ADVANCED_FACE('',(#99514),#99539,.F.); +#99514 = FACE_BOUND('',#99515,.T.); +#99515 = EDGE_LOOP('',(#99516,#99524,#99532,#99538)); +#99516 = ORIENTED_EDGE('',*,*,#99517,.T.); +#99517 = EDGE_CURVE('',#99487,#99518,#99520,.T.); +#99518 = VERTEX_POINT('',#99519); +#99519 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.25)); +#99520 = LINE('',#99521,#99522); +#99521 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.25)); +#99522 = VECTOR('',#99523,1.); +#99523 = DIRECTION('',(6.662906143884E-15,-1.,-0.)); +#99524 = ORIENTED_EDGE('',*,*,#99525,.F.); +#99525 = EDGE_CURVE('',#99526,#99518,#99528,.T.); +#99526 = VERTEX_POINT('',#99527); +#99527 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.251)); +#99528 = LINE('',#99529,#99530); +#99529 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.251)); +#99530 = VECTOR('',#99531,1.); +#99531 = DIRECTION('',(-0.,-0.,-1.)); +#99532 = ORIENTED_EDGE('',*,*,#99533,.F.); +#99533 = EDGE_CURVE('',#99495,#99526,#99534,.T.); +#99534 = LINE('',#99535,#99536); +#99535 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.251)); +#99536 = VECTOR('',#99537,1.); +#99537 = DIRECTION('',(6.662906143884E-15,-1.,-0.)); +#99538 = ORIENTED_EDGE('',*,*,#99494,.T.); +#99539 = PLANE('',#99540); +#99540 = AXIS2_PLACEMENT_3D('',#99541,#99542,#99543); +#99541 = CARTESIAN_POINT('',(-0.180567520635,1.35694216024,3.251)); +#99542 = DIRECTION('',(1.,6.662906143884E-15,-0.)); +#99543 = DIRECTION('',(-6.662906143884E-15,1.,0.)); +#99544 = ADVANCED_FACE('',(#99545),#99570,.F.); +#99545 = FACE_BOUND('',#99546,.T.); +#99546 = EDGE_LOOP('',(#99547,#99555,#99563,#99569)); +#99547 = ORIENTED_EDGE('',*,*,#99548,.T.); +#99548 = EDGE_CURVE('',#99518,#99549,#99551,.T.); +#99549 = VERTEX_POINT('',#99550); +#99550 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.25)); +#99551 = LINE('',#99552,#99553); +#99552 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.25)); +#99553 = VECTOR('',#99554,1.); +#99554 = DIRECTION('',(-1.,-7.365967763563E-15,-0.)); +#99555 = ORIENTED_EDGE('',*,*,#99556,.F.); +#99556 = EDGE_CURVE('',#99557,#99549,#99559,.T.); +#99557 = VERTEX_POINT('',#99558); +#99558 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.251)); +#99559 = LINE('',#99560,#99561); +#99560 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.251)); +#99561 = VECTOR('',#99562,1.); +#99562 = DIRECTION('',(-0.,-0.,-1.)); +#99563 = ORIENTED_EDGE('',*,*,#99564,.F.); +#99564 = EDGE_CURVE('',#99526,#99557,#99565,.T.); +#99565 = LINE('',#99566,#99567); +#99566 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.251)); +#99567 = VECTOR('',#99568,1.); +#99568 = DIRECTION('',(-1.,-7.365967763563E-15,-0.)); +#99569 = ORIENTED_EDGE('',*,*,#99525,.T.); +#99570 = PLANE('',#99571); +#99571 = AXIS2_PLACEMENT_3D('',#99572,#99573,#99574); +#99572 = CARTESIAN_POINT('',(-0.298320104658,1.35694216024,3.251)); +#99573 = DIRECTION('',(7.365967763563E-15,-1.,0.)); +#99574 = DIRECTION('',(1.,7.365967763563E-15,0.)); +#99575 = ADVANCED_FACE('',(#99576),#99601,.F.); +#99576 = FACE_BOUND('',#99577,.T.); +#99577 = EDGE_LOOP('',(#99578,#99586,#99594,#99600)); +#99578 = ORIENTED_EDGE('',*,*,#99579,.T.); +#99579 = EDGE_CURVE('',#99549,#99580,#99582,.T.); +#99580 = VERTEX_POINT('',#99581); +#99581 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.25)); +#99582 = LINE('',#99583,#99584); +#99583 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.25)); +#99584 = VECTOR('',#99585,1.); +#99585 = DIRECTION('',(6.179228512849E-15,-1.,-0.)); +#99586 = ORIENTED_EDGE('',*,*,#99587,.F.); +#99587 = EDGE_CURVE('',#99588,#99580,#99590,.T.); +#99588 = VERTEX_POINT('',#99589); +#99589 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.251)); +#99590 = LINE('',#99591,#99592); +#99591 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.251)); +#99592 = VECTOR('',#99593,1.); +#99593 = DIRECTION('',(-0.,-0.,-1.)); +#99594 = ORIENTED_EDGE('',*,*,#99595,.F.); +#99595 = EDGE_CURVE('',#99557,#99588,#99596,.T.); +#99596 = LINE('',#99597,#99598); +#99597 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.251)); +#99598 = VECTOR('',#99599,1.); +#99599 = DIRECTION('',(6.179228512849E-15,-1.,-0.)); +#99600 = ORIENTED_EDGE('',*,*,#99556,.T.); +#99601 = PLANE('',#99602); +#99602 = AXIS2_PLACEMENT_3D('',#99603,#99604,#99605); +#99603 = CARTESIAN_POINT('',(-0.298320104658,1.321850330564,3.251)); +#99604 = DIRECTION('',(1.,6.179228512849E-15,-0.)); +#99605 = DIRECTION('',(-6.179228512849E-15,1.,0.)); +#99606 = ADVANCED_FACE('',(#99607),#99632,.F.); +#99607 = FACE_BOUND('',#99608,.T.); +#99608 = EDGE_LOOP('',(#99609,#99617,#99625,#99631)); +#99609 = ORIENTED_EDGE('',*,*,#99610,.T.); +#99610 = EDGE_CURVE('',#99580,#99611,#99613,.T.); +#99611 = VERTEX_POINT('',#99612); +#99612 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.25)); +#99613 = LINE('',#99614,#99615); +#99614 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.25)); +#99615 = VECTOR('',#99616,1.); +#99616 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#99617 = ORIENTED_EDGE('',*,*,#99618,.F.); +#99618 = EDGE_CURVE('',#99619,#99611,#99621,.T.); +#99619 = VERTEX_POINT('',#99620); +#99620 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.251)); +#99621 = LINE('',#99622,#99623); +#99622 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.251)); +#99623 = VECTOR('',#99624,1.); +#99624 = DIRECTION('',(-0.,-0.,-1.)); +#99625 = ORIENTED_EDGE('',*,*,#99626,.F.); +#99626 = EDGE_CURVE('',#99588,#99619,#99627,.T.); +#99627 = LINE('',#99628,#99629); +#99628 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.251)); +#99629 = VECTOR('',#99630,1.); +#99630 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#99631 = ORIENTED_EDGE('',*,*,#99587,.T.); +#99632 = PLANE('',#99633); +#99633 = AXIS2_PLACEMENT_3D('',#99634,#99635,#99636); +#99634 = CARTESIAN_POINT('',(-0.141186689555,1.321850330564,3.251)); +#99635 = DIRECTION('',(-6.899882954709E-15,1.,0.)); +#99636 = DIRECTION('',(-1.,-6.899882954709E-15,0.)); +#99637 = ADVANCED_FACE('',(#99638),#99663,.F.); +#99638 = FACE_BOUND('',#99639,.T.); +#99639 = EDGE_LOOP('',(#99640,#99648,#99656,#99662)); +#99640 = ORIENTED_EDGE('',*,*,#99641,.T.); +#99641 = EDGE_CURVE('',#99611,#99642,#99644,.T.); +#99642 = VERTEX_POINT('',#99643); +#99643 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.25)); +#99644 = LINE('',#99645,#99646); +#99645 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.25)); +#99646 = VECTOR('',#99647,1.); +#99647 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#99648 = ORIENTED_EDGE('',*,*,#99649,.F.); +#99649 = EDGE_CURVE('',#99650,#99642,#99652,.T.); +#99650 = VERTEX_POINT('',#99651); +#99651 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.251)); +#99652 = LINE('',#99653,#99654); +#99653 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.251)); +#99654 = VECTOR('',#99655,1.); +#99655 = DIRECTION('',(-0.,-0.,-1.)); +#99656 = ORIENTED_EDGE('',*,*,#99657,.F.); +#99657 = EDGE_CURVE('',#99619,#99650,#99658,.T.); +#99658 = LINE('',#99659,#99660); +#99659 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.251)); +#99660 = VECTOR('',#99661,1.); +#99661 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#99662 = ORIENTED_EDGE('',*,*,#99618,.T.); +#99663 = PLANE('',#99664); +#99664 = AXIS2_PLACEMENT_3D('',#99665,#99666,#99667); +#99665 = CARTESIAN_POINT('',(-0.141186689555,1.626915303211,3.251)); +#99666 = DIRECTION('',(-1.,-7.108008258556E-15,0.)); +#99667 = DIRECTION('',(7.108008258556E-15,-1.,0.)); +#99668 = ADVANCED_FACE('',(#99669),#99685,.F.); +#99669 = FACE_BOUND('',#99670,.T.); +#99670 = EDGE_LOOP('',(#99671,#99677,#99678,#99684)); +#99671 = ORIENTED_EDGE('',*,*,#99672,.T.); +#99672 = EDGE_CURVE('',#99642,#99323,#99673,.T.); +#99673 = LINE('',#99674,#99675); +#99674 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.25)); +#99675 = VECTOR('',#99676,1.); +#99676 = DIRECTION('',(-1.,-6.608015282178E-15,-0.)); +#99677 = ORIENTED_EDGE('',*,*,#99348,.F.); +#99678 = ORIENTED_EDGE('',*,*,#99679,.F.); +#99679 = EDGE_CURVE('',#99650,#99341,#99680,.T.); +#99680 = LINE('',#99681,#99682); +#99681 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.251)); +#99682 = VECTOR('',#99683,1.); +#99683 = DIRECTION('',(-1.,-6.608015282178E-15,-0.)); +#99684 = ORIENTED_EDGE('',*,*,#99649,.T.); +#99685 = PLANE('',#99686); +#99686 = AXIS2_PLACEMENT_3D('',#99687,#99688,#99689); +#99687 = CARTESIAN_POINT('',(-0.30526048875,1.626915303211,3.251)); +#99688 = DIRECTION('',(6.608015282178E-15,-1.,0.)); +#99689 = DIRECTION('',(1.,6.608015282178E-15,0.)); +#99690 = ADVANCED_FACE('',(#99691),#99705,.F.); +#99691 = FACE_BOUND('',#99692,.T.); +#99692 = EDGE_LOOP('',(#99693,#99694,#99695,#99696,#99697,#99698,#99699, + #99700,#99701,#99702,#99703,#99704)); +#99693 = ORIENTED_EDGE('',*,*,#99340,.T.); +#99694 = ORIENTED_EDGE('',*,*,#99378,.T.); +#99695 = ORIENTED_EDGE('',*,*,#99409,.T.); +#99696 = ORIENTED_EDGE('',*,*,#99440,.T.); +#99697 = ORIENTED_EDGE('',*,*,#99471,.T.); +#99698 = ORIENTED_EDGE('',*,*,#99502,.T.); +#99699 = ORIENTED_EDGE('',*,*,#99533,.T.); +#99700 = ORIENTED_EDGE('',*,*,#99564,.T.); +#99701 = ORIENTED_EDGE('',*,*,#99595,.T.); +#99702 = ORIENTED_EDGE('',*,*,#99626,.T.); +#99703 = ORIENTED_EDGE('',*,*,#99657,.T.); +#99704 = ORIENTED_EDGE('',*,*,#99679,.T.); +#99705 = PLANE('',#99706); +#99706 = AXIS2_PLACEMENT_3D('',#99707,#99708,#99709); +#99707 = CARTESIAN_POINT('',(0.,0.,3.251)); +#99708 = DIRECTION('',(0.,0.,-1.)); +#99709 = DIRECTION('',(-1.,0.,-0.)); +#99710 = ADVANCED_FACE('',(#99711),#99725,.T.); +#99711 = FACE_BOUND('',#99712,.T.); +#99712 = EDGE_LOOP('',(#99713,#99714,#99715,#99716,#99717,#99718,#99719, + #99720,#99721,#99722,#99723,#99724)); +#99713 = ORIENTED_EDGE('',*,*,#99322,.F.); +#99714 = ORIENTED_EDGE('',*,*,#99672,.F.); +#99715 = ORIENTED_EDGE('',*,*,#99641,.F.); +#99716 = ORIENTED_EDGE('',*,*,#99610,.F.); +#99717 = ORIENTED_EDGE('',*,*,#99579,.F.); +#99718 = ORIENTED_EDGE('',*,*,#99548,.F.); +#99719 = ORIENTED_EDGE('',*,*,#99517,.F.); +#99720 = ORIENTED_EDGE('',*,*,#99486,.F.); +#99721 = ORIENTED_EDGE('',*,*,#99455,.F.); +#99722 = ORIENTED_EDGE('',*,*,#99424,.F.); +#99723 = ORIENTED_EDGE('',*,*,#99393,.F.); +#99724 = ORIENTED_EDGE('',*,*,#99362,.F.); +#99725 = PLANE('',#99726); +#99726 = AXIS2_PLACEMENT_3D('',#99727,#99728,#99729); +#99727 = CARTESIAN_POINT('',(0.,0.,3.25)); +#99728 = DIRECTION('',(0.,0.,-1.)); +#99729 = DIRECTION('',(-1.,0.,-0.)); +#99730 = MANIFOLD_SOLID_BREP('',#99731); +#99731 = CLOSED_SHELL('',(#99732,#99932,#100132,#100158,#100175,#100196, + #100217,#100234,#100255,#100276,#100297,#100318,#100335,#100352, + #100369,#100386,#100402,#100428,#100449,#100470,#100491,#100512, + #100533,#100550)); +#99732 = ADVANCED_FACE('',(#99733,#99855),#99927,.T.); +#99733 = FACE_BOUND('',#99734,.T.); +#99734 = EDGE_LOOP('',(#99735,#99746,#99754,#99763,#99772,#99780,#99789, + #99798,#99807,#99816,#99824,#99832,#99840,#99848)); +#99735 = ORIENTED_EDGE('',*,*,#99736,.T.); +#99736 = EDGE_CURVE('',#99737,#99739,#99741,.T.); +#99737 = VERTEX_POINT('',#99738); +#99738 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#99739 = VERTEX_POINT('',#99740); +#99740 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.251)); +#99741 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99742,#99743,#99744,#99745), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#99742 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#99743 = CARTESIAN_POINT('',(-0.40975615934,1.404043193849,3.251)); +#99744 = CARTESIAN_POINT('',(-0.384723987504,1.41074963241,3.251)); +#99745 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.251)); +#99746 = ORIENTED_EDGE('',*,*,#99747,.T.); +#99747 = EDGE_CURVE('',#99739,#99748,#99750,.T.); +#99748 = VERTEX_POINT('',#99749); +#99749 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#99750 = LINE('',#99751,#99752); +#99751 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#99752 = VECTOR('',#99753,1.); +#99753 = DIRECTION('',(-5.841707627396E-15,1.,-0.)); +#99754 = ORIENTED_EDGE('',*,*,#99755,.T.); +#99755 = EDGE_CURVE('',#99748,#99756,#99758,.T.); +#99756 = VERTEX_POINT('',#99757); +#99757 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#99758 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99759,#99760,#99761,#99762), + .UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.),.PIECEWISE_BEZIER_KNOTS.); +#99759 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#99760 = CARTESIAN_POINT('',(-0.38464600566,1.443969897836,3.251)); +#99761 = CARTESIAN_POINT('',(-0.408430467996,1.435079967651,3.251)); +#99762 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#99763 = ORIENTED_EDGE('',*,*,#99764,.T.); +#99764 = EDGE_CURVE('',#99756,#99765,#99767,.T.); +#99765 = VERTEX_POINT('',#99766); +#99766 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.251)); +#99767 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99768,#99769,#99770,#99771), + .UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.),.PIECEWISE_BEZIER_KNOTS.); +#99768 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#99769 = CARTESIAN_POINT('',(-0.463953540727,1.435079967651,3.251)); +#99770 = CARTESIAN_POINT('',(-0.478692109191,1.452859828021,3.251)); +#99771 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.251)); +#99772 = ORIENTED_EDGE('',*,*,#99773,.T.); +#99773 = EDGE_CURVE('',#99765,#99774,#99776,.T.); +#99774 = VERTEX_POINT('',#99775); +#99775 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#99776 = LINE('',#99777,#99778); +#99777 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#99778 = VECTOR('',#99779,1.); +#99779 = DIRECTION('',(0.990328603988,0.138741688482,-0.)); +#99780 = ORIENTED_EDGE('',*,*,#99781,.T.); +#99781 = EDGE_CURVE('',#99774,#99782,#99784,.T.); +#99782 = VERTEX_POINT('',#99783); +#99783 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#99784 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99785,#99786,#99787,#99788), + .UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.),.PIECEWISE_BEZIER_KNOTS.); +#99785 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#99786 = CARTESIAN_POINT('',(-0.365930363167,1.504171881191,3.251)); +#99787 = CARTESIAN_POINT('',(-0.341833973456,1.527878361683,3.251)); +#99788 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#99789 = ORIENTED_EDGE('',*,*,#99790,.T.); +#99790 = EDGE_CURVE('',#99782,#99791,#99793,.T.); +#99791 = VERTEX_POINT('',#99792); +#99792 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#99793 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99794,#99795,#99796,#99797), + .UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.),.PIECEWISE_BEZIER_KNOTS.); +#99794 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#99795 = CARTESIAN_POINT('',(-0.341833973456,1.588080345038,3.251)); +#99796 = CARTESIAN_POINT('',(-0.348072520954,1.603520750096,3.251)); +#99797 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#99798 = ORIENTED_EDGE('',*,*,#99799,.T.); +#99799 = EDGE_CURVE('',#99791,#99800,#99802,.T.); +#99800 = VERTEX_POINT('',#99801); +#99801 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#99802 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99803,#99804,#99805,#99806), + .UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.),.PIECEWISE_BEZIER_KNOTS.); +#99803 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#99804 = CARTESIAN_POINT('',(-0.373026710945,1.626291448462,3.251)); +#99805 = CARTESIAN_POINT('',(-0.389792807346,1.632062104898,3.251)); +#99806 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#99807 = ORIENTED_EDGE('',*,*,#99808,.T.); +#99808 = EDGE_CURVE('',#99800,#99809,#99811,.T.); +#99809 = VERTEX_POINT('',#99810); +#99810 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.251)); +#99811 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99812,#99813,#99814,#99815), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#99812 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#99813 = CARTESIAN_POINT('',(-0.440325042079,1.632062104898,3.251)); +#99814 = CARTESIAN_POINT('',(-0.462627849385,1.61911711884,3.251)); +#99815 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.251)); +#99816 = ORIENTED_EDGE('',*,*,#99817,.T.); +#99817 = EDGE_CURVE('',#99809,#99818,#99820,.T.); +#99818 = VERTEX_POINT('',#99819); +#99819 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.251)); +#99820 = LINE('',#99821,#99822); +#99821 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.251)); +#99822 = VECTOR('',#99823,1.); +#99823 = DIRECTION('',(-1.,-2.138963716205E-13,-0.)); +#99824 = ORIENTED_EDGE('',*,*,#99825,.T.); +#99825 = EDGE_CURVE('',#99818,#99826,#99828,.T.); +#99826 = VERTEX_POINT('',#99827); +#99827 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.251)); +#99828 = LINE('',#99829,#99830); +#99829 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.251)); +#99830 = VECTOR('',#99831,1.); +#99831 = DIRECTION('',(-1.287339273529E-14,1.,-0.)); +#99832 = ORIENTED_EDGE('',*,*,#99833,.T.); +#99833 = EDGE_CURVE('',#99826,#99834,#99836,.T.); +#99834 = VERTEX_POINT('',#99835); +#99835 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.251)); +#99836 = LINE('',#99837,#99838); +#99837 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.251)); +#99838 = VECTOR('',#99839,1.); +#99839 = DIRECTION('',(-1.,-5.674801695376E-15,-0.)); +#99840 = ORIENTED_EDGE('',*,*,#99841,.T.); +#99841 = EDGE_CURVE('',#99834,#99842,#99844,.T.); +#99842 = VERTEX_POINT('',#99843); +#99843 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#99844 = LINE('',#99845,#99846); +#99845 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#99846 = VECTOR('',#99847,1.); +#99847 = DIRECTION('',(6.186101959462E-15,-1.,-0.)); +#99848 = ORIENTED_EDGE('',*,*,#99849,.T.); +#99849 = EDGE_CURVE('',#99842,#99737,#99850,.T.); +#99850 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99851,#99852,#99853,#99854), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#99851 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#99852 = CARTESIAN_POINT('',(-0.516903212616,1.43149280284,3.251)); +#99853 = CARTESIAN_POINT('',(-0.490623331281,1.404043193849,3.251)); +#99854 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#99855 = FACE_BOUND('',#99856,.T.); +#99856 = EDGE_LOOP('',(#99857,#99868,#99877,#99885,#99893,#99902,#99911, + #99920)); +#99857 = ORIENTED_EDGE('',*,*,#99858,.F.); +#99858 = EDGE_CURVE('',#99859,#99861,#99863,.T.); +#99859 = VERTEX_POINT('',#99860); +#99860 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#99861 = VERTEX_POINT('',#99862); +#99862 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#99863 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99864,#99865,#99866,#99867), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#99864 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#99865 = CARTESIAN_POINT('',(-0.38402215091,1.544410512552,3.251)); +#99866 = CARTESIAN_POINT('',(-0.380590949787,1.553612370111,3.251)); +#99867 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#99868 = ORIENTED_EDGE('',*,*,#99869,.F.); +#99869 = EDGE_CURVE('',#99870,#99859,#99872,.T.); +#99870 = VERTEX_POINT('',#99871); +#99871 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.251)); +#99872 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99873,#99874,#99875,#99876), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#99873 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.251)); +#99874 = CARTESIAN_POINT('',(-0.409834141183,1.526942579559,3.251)); +#99875 = CARTESIAN_POINT('',(-0.397513009875,1.531309562807,3.251)); +#99876 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#99877 = ORIENTED_EDGE('',*,*,#99878,.F.); +#99878 = EDGE_CURVE('',#99879,#99870,#99881,.T.); +#99879 = VERTEX_POINT('',#99880); +#99880 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.251)); +#99881 = LINE('',#99882,#99883); +#99882 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.251)); +#99883 = VECTOR('',#99884,1.); +#99884 = DIRECTION('',(0.9910683663,0.133354764894,0.)); +#99885 = ORIENTED_EDGE('',*,*,#99886,.F.); +#99886 = EDGE_CURVE('',#99887,#99879,#99889,.T.); +#99887 = VERTEX_POINT('',#99888); +#99888 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#99889 = LINE('',#99890,#99891); +#99890 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#99891 = VECTOR('',#99892,1.); +#99892 = DIRECTION('',(0.,-1.,0.)); +#99893 = ORIENTED_EDGE('',*,*,#99894,.F.); +#99894 = EDGE_CURVE('',#99895,#99887,#99897,.T.); +#99895 = VERTEX_POINT('',#99896); +#99896 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#99897 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99898,#99899,#99900,#99901), + .UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.),.PIECEWISE_BEZIER_KNOTS.); +#99898 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#99899 = CARTESIAN_POINT('',(-0.47323338013,1.571236266794,3.251)); +#99900 = CARTESIAN_POINT('',(-0.478692109191,1.556419716486,3.251)); +#99901 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#99902 = ORIENTED_EDGE('',*,*,#99903,.F.); +#99903 = EDGE_CURVE('',#99904,#99895,#99906,.T.); +#99904 = VERTEX_POINT('',#99905); +#99905 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#99906 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99907,#99908,#99909,#99910), + .UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.),.PIECEWISE_BEZIER_KNOTS.); +#99907 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#99908 = CARTESIAN_POINT('',(-0.437595677549,1.600713403721,3.251)); +#99909 = CARTESIAN_POINT('',(-0.451476445731,1.594786783598,3.251)); +#99910 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#99911 = ORIENTED_EDGE('',*,*,#99912,.F.); +#99912 = EDGE_CURVE('',#99913,#99904,#99915,.T.); +#99913 = VERTEX_POINT('',#99914); +#99914 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#99915 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99916,#99917,#99918,#99919), + .UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.),.PIECEWISE_BEZIER_KNOTS.); +#99916 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#99917 = CARTESIAN_POINT('',(-0.398994664906,1.597438166284,3.251)); +#99918 = CARTESIAN_POINT('',(-0.408742395371,1.600713403721,3.251)); +#99919 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#99920 = ORIENTED_EDGE('',*,*,#99921,.F.); +#99921 = EDGE_CURVE('',#99861,#99913,#99922,.T.); +#99922 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99923,#99924,#99925,#99926), + .UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.),.PIECEWISE_BEZIER_KNOTS.); +#99923 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#99924 = CARTESIAN_POINT('',(-0.380590949787,1.575915177416,3.251)); +#99925 = CARTESIAN_POINT('',(-0.384256096442,1.584337216539,3.251)); +#99926 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#99927 = PLANE('',#99928); +#99928 = AXIS2_PLACEMENT_3D('',#99929,#99930,#99931); +#99929 = CARTESIAN_POINT('',(-0.398088125972,1.409092518231,3.251)); +#99930 = DIRECTION('',(0.,0.,1.)); +#99931 = DIRECTION('',(1.,0.,-0.)); +#99932 = ADVANCED_FACE('',(#99933,#100055),#100127,.F.); +#99933 = FACE_BOUND('',#99934,.T.); +#99934 = EDGE_LOOP('',(#99935,#99946,#99955,#99963,#99971,#99979,#99987, + #99996,#100005,#100014,#100023,#100031,#100040,#100049)); +#99935 = ORIENTED_EDGE('',*,*,#99936,.F.); +#99936 = EDGE_CURVE('',#99937,#99939,#99941,.T.); +#99937 = VERTEX_POINT('',#99938); +#99938 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.25)); +#99939 = VERTEX_POINT('',#99940); +#99940 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.25)); +#99941 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99942,#99943,#99944,#99945), + .UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#99942 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.25)); +#99943 = CARTESIAN_POINT('',(-0.40975615934,1.404043193849,3.25)); +#99944 = CARTESIAN_POINT('',(-0.384723987504,1.41074963241,3.25)); +#99945 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.25)); +#99946 = ORIENTED_EDGE('',*,*,#99947,.F.); +#99947 = EDGE_CURVE('',#99948,#99937,#99950,.T.); +#99948 = VERTEX_POINT('',#99949); +#99949 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.25)); +#99950 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99951,#99952,#99953,#99954), + .UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#99951 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.25)); +#99952 = CARTESIAN_POINT('',(-0.516903212616,1.43149280284,3.25)); +#99953 = CARTESIAN_POINT('',(-0.490623331281,1.404043193849,3.25)); +#99954 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.25)); +#99955 = ORIENTED_EDGE('',*,*,#99956,.F.); +#99956 = EDGE_CURVE('',#99957,#99948,#99959,.T.); +#99957 = VERTEX_POINT('',#99958); +#99958 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.25)); +#99959 = LINE('',#99960,#99961); +#99960 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.25)); +#99961 = VECTOR('',#99962,1.); +#99962 = DIRECTION('',(6.186101959462E-15,-1.,-0.)); +#99963 = ORIENTED_EDGE('',*,*,#99964,.F.); +#99964 = EDGE_CURVE('',#99965,#99957,#99967,.T.); +#99965 = VERTEX_POINT('',#99966); +#99966 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.25)); +#99967 = LINE('',#99968,#99969); +#99968 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.25)); +#99969 = VECTOR('',#99970,1.); +#99970 = DIRECTION('',(-1.,-5.674801695376E-15,-0.)); +#99971 = ORIENTED_EDGE('',*,*,#99972,.F.); +#99972 = EDGE_CURVE('',#99973,#99965,#99975,.T.); +#99973 = VERTEX_POINT('',#99974); +#99974 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.25)); +#99975 = LINE('',#99976,#99977); +#99976 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.25)); +#99977 = VECTOR('',#99978,1.); +#99978 = DIRECTION('',(-1.287339273529E-14,1.,-0.)); +#99979 = ORIENTED_EDGE('',*,*,#99980,.F.); +#99980 = EDGE_CURVE('',#99981,#99973,#99983,.T.); +#99981 = VERTEX_POINT('',#99982); +#99982 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.25)); +#99983 = LINE('',#99984,#99985); +#99984 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.25)); +#99985 = VECTOR('',#99986,1.); +#99986 = DIRECTION('',(-1.,-2.138963716205E-13,-0.)); +#99987 = ORIENTED_EDGE('',*,*,#99988,.F.); +#99988 = EDGE_CURVE('',#99989,#99981,#99991,.T.); +#99989 = VERTEX_POINT('',#99990); +#99990 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.25)); +#99991 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#99992,#99993,#99994,#99995), + .UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.),.PIECEWISE_BEZIER_KNOTS.); +#99992 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.25)); +#99993 = CARTESIAN_POINT('',(-0.440325042079,1.632062104898,3.25)); +#99994 = CARTESIAN_POINT('',(-0.462627849385,1.61911711884,3.25)); +#99995 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.25)); +#99996 = ORIENTED_EDGE('',*,*,#99997,.F.); +#99997 = EDGE_CURVE('',#99998,#99989,#100000,.T.); +#99998 = VERTEX_POINT('',#99999); +#99999 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.25)); +#100000 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100001,#100002,#100003, + #100004),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#100001 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.25)); +#100002 = CARTESIAN_POINT('',(-0.373026710945,1.626291448462,3.25)); +#100003 = CARTESIAN_POINT('',(-0.389792807346,1.632062104898,3.25)); +#100004 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.25)); +#100005 = ORIENTED_EDGE('',*,*,#100006,.F.); +#100006 = EDGE_CURVE('',#100007,#99998,#100009,.T.); +#100007 = VERTEX_POINT('',#100008); +#100008 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.25)); +#100009 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100010,#100011,#100012, + #100013),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#100010 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.25)); +#100011 = CARTESIAN_POINT('',(-0.341833973456,1.588080345038,3.25)); +#100012 = CARTESIAN_POINT('',(-0.348072520954,1.603520750096,3.25)); +#100013 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.25)); +#100014 = ORIENTED_EDGE('',*,*,#100015,.F.); +#100015 = EDGE_CURVE('',#100016,#100007,#100018,.T.); +#100016 = VERTEX_POINT('',#100017); +#100017 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.25)); +#100018 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100019,#100020,#100021, + #100022),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#100019 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.25)); +#100020 = CARTESIAN_POINT('',(-0.365930363167,1.504171881191,3.25)); +#100021 = CARTESIAN_POINT('',(-0.341833973456,1.527878361683,3.25)); +#100022 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.25)); +#100023 = ORIENTED_EDGE('',*,*,#100024,.F.); +#100024 = EDGE_CURVE('',#100025,#100016,#100027,.T.); +#100025 = VERTEX_POINT('',#100026); +#100026 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.25)); +#100027 = LINE('',#100028,#100029); +#100028 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.25)); +#100029 = VECTOR('',#100030,1.); +#100030 = DIRECTION('',(0.990328603988,0.138741688482,-0.)); +#100031 = ORIENTED_EDGE('',*,*,#100032,.F.); +#100032 = EDGE_CURVE('',#100033,#100025,#100035,.T.); +#100033 = VERTEX_POINT('',#100034); +#100034 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.25)); +#100035 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100036,#100037,#100038, + #100039),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#100036 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.25)); +#100037 = CARTESIAN_POINT('',(-0.463953540727,1.435079967651,3.25)); +#100038 = CARTESIAN_POINT('',(-0.478692109191,1.452859828021,3.25)); +#100039 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.25)); +#100040 = ORIENTED_EDGE('',*,*,#100041,.F.); +#100041 = EDGE_CURVE('',#100042,#100033,#100044,.T.); +#100042 = VERTEX_POINT('',#100043); +#100043 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.25)); +#100044 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100045,#100046,#100047, + #100048),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#100045 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.25)); +#100046 = CARTESIAN_POINT('',(-0.38464600566,1.443969897836,3.25)); +#100047 = CARTESIAN_POINT('',(-0.408430467996,1.435079967651,3.25)); +#100048 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.25)); +#100049 = ORIENTED_EDGE('',*,*,#100050,.F.); +#100050 = EDGE_CURVE('',#99939,#100042,#100051,.T.); +#100051 = LINE('',#100052,#100053); +#100052 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.25)); +#100053 = VECTOR('',#100054,1.); +#100054 = DIRECTION('',(-5.841707627396E-15,1.,-0.)); +#100055 = FACE_BOUND('',#100056,.T.); +#100056 = EDGE_LOOP('',(#100057,#100068,#100077,#100086,#100095,#100104, + #100113,#100121)); +#100057 = ORIENTED_EDGE('',*,*,#100058,.T.); +#100058 = EDGE_CURVE('',#100059,#100061,#100063,.T.); +#100059 = VERTEX_POINT('',#100060); +#100060 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.25)); +#100061 = VERTEX_POINT('',#100062); +#100062 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.25)); +#100063 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100064,#100065,#100066, + #100067),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100064 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.25)); +#100065 = CARTESIAN_POINT('',(-0.409834141183,1.526942579559,3.25)); +#100066 = CARTESIAN_POINT('',(-0.397513009875,1.531309562807,3.25)); +#100067 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.25)); +#100068 = ORIENTED_EDGE('',*,*,#100069,.T.); +#100069 = EDGE_CURVE('',#100061,#100070,#100072,.T.); +#100070 = VERTEX_POINT('',#100071); +#100071 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.25)); +#100072 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100073,#100074,#100075, + #100076),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#100073 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.25)); +#100074 = CARTESIAN_POINT('',(-0.38402215091,1.544410512552,3.25)); +#100075 = CARTESIAN_POINT('',(-0.380590949787,1.553612370111,3.25)); +#100076 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.25)); +#100077 = ORIENTED_EDGE('',*,*,#100078,.T.); +#100078 = EDGE_CURVE('',#100070,#100079,#100081,.T.); +#100079 = VERTEX_POINT('',#100080); +#100080 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.25)); +#100081 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100082,#100083,#100084, + #100085),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#100082 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.25)); +#100083 = CARTESIAN_POINT('',(-0.380590949787,1.575915177416,3.25)); +#100084 = CARTESIAN_POINT('',(-0.384256096442,1.584337216539,3.25)); +#100085 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.25)); +#100086 = ORIENTED_EDGE('',*,*,#100087,.T.); +#100087 = EDGE_CURVE('',#100079,#100088,#100090,.T.); +#100088 = VERTEX_POINT('',#100089); +#100089 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.25)); +#100090 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100091,#100092,#100093, + #100094),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#100091 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.25)); +#100092 = CARTESIAN_POINT('',(-0.398994664906,1.597438166284,3.25)); +#100093 = CARTESIAN_POINT('',(-0.408742395371,1.600713403721,3.25)); +#100094 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.25)); +#100095 = ORIENTED_EDGE('',*,*,#100096,.T.); +#100096 = EDGE_CURVE('',#100088,#100097,#100099,.T.); +#100097 = VERTEX_POINT('',#100098); +#100098 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.25)); +#100099 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100100,#100101,#100102, + #100103),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#100100 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.25)); +#100101 = CARTESIAN_POINT('',(-0.437595677549,1.600713403721,3.25)); +#100102 = CARTESIAN_POINT('',(-0.451476445731,1.594786783598,3.25)); +#100103 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.25)); +#100104 = ORIENTED_EDGE('',*,*,#100105,.T.); +#100105 = EDGE_CURVE('',#100097,#100106,#100108,.T.); +#100106 = VERTEX_POINT('',#100107); +#100107 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.25)); +#100108 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100109,#100110,#100111, + #100112),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#100109 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.25)); +#100110 = CARTESIAN_POINT('',(-0.47323338013,1.571236266794,3.25)); +#100111 = CARTESIAN_POINT('',(-0.478692109191,1.556419716486,3.25)); +#100112 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.25)); +#100113 = ORIENTED_EDGE('',*,*,#100114,.T.); +#100114 = EDGE_CURVE('',#100106,#100115,#100117,.T.); +#100115 = VERTEX_POINT('',#100116); +#100116 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.25)); +#100117 = LINE('',#100118,#100119); +#100118 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.25)); +#100119 = VECTOR('',#100120,1.); +#100120 = DIRECTION('',(0.,-1.,0.)); +#100121 = ORIENTED_EDGE('',*,*,#100122,.T.); +#100122 = EDGE_CURVE('',#100115,#100059,#100123,.T.); +#100123 = LINE('',#100124,#100125); +#100124 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.25)); +#100125 = VECTOR('',#100126,1.); +#100126 = DIRECTION('',(0.9910683663,0.133354764894,0.)); +#100127 = PLANE('',#100128); +#100128 = AXIS2_PLACEMENT_3D('',#100129,#100130,#100131); +#100129 = CARTESIAN_POINT('',(-0.398088125972,1.409092518231,3.25)); +#100130 = DIRECTION('',(0.,0.,1.)); +#100131 = DIRECTION('',(1.,0.,-0.)); +#100132 = ADVANCED_FACE('',(#100133),#100149,.F.); +#100133 = FACE_BOUND('',#100134,.F.); +#100134 = EDGE_LOOP('',(#100135,#100141,#100142,#100148)); +#100135 = ORIENTED_EDGE('',*,*,#100136,.F.); +#100136 = EDGE_CURVE('',#99737,#99937,#100137,.T.); +#100137 = LINE('',#100138,#100139); +#100138 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#100139 = VECTOR('',#100140,1.); +#100140 = DIRECTION('',(-0.,-0.,-1.)); +#100141 = ORIENTED_EDGE('',*,*,#99736,.T.); +#100142 = ORIENTED_EDGE('',*,*,#100143,.T.); +#100143 = EDGE_CURVE('',#99739,#99939,#100144,.T.); +#100144 = LINE('',#100145,#100146); +#100145 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.251)); +#100146 = VECTOR('',#100147,1.); +#100147 = DIRECTION('',(-0.,-0.,-1.)); +#100148 = ORIENTED_EDGE('',*,*,#99936,.F.); +#100149 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100150,#100151) + ,(#100152,#100153) + ,(#100154,#100155) + ,(#100156,#100157 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100150 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#100151 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.25)); +#100152 = CARTESIAN_POINT('',(-0.40975615934,1.404043193849,3.251)); +#100153 = CARTESIAN_POINT('',(-0.40975615934,1.404043193849,3.25)); +#100154 = CARTESIAN_POINT('',(-0.384723987504,1.41074963241,3.251)); +#100155 = CARTESIAN_POINT('',(-0.384723987504,1.41074963241,3.25)); +#100156 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.251)); +#100157 = CARTESIAN_POINT('',(-0.363123016792,1.424318473217,3.25)); +#100158 = ADVANCED_FACE('',(#100159),#100170,.F.); +#100159 = FACE_BOUND('',#100160,.T.); +#100160 = EDGE_LOOP('',(#100161,#100162,#100168,#100169)); +#100161 = ORIENTED_EDGE('',*,*,#100050,.T.); +#100162 = ORIENTED_EDGE('',*,*,#100163,.F.); +#100163 = EDGE_CURVE('',#99748,#100042,#100164,.T.); +#100164 = LINE('',#100165,#100166); +#100165 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#100166 = VECTOR('',#100167,1.); +#100167 = DIRECTION('',(-0.,-0.,-1.)); +#100168 = ORIENTED_EDGE('',*,*,#99747,.F.); +#100169 = ORIENTED_EDGE('',*,*,#100143,.T.); +#100170 = PLANE('',#100171); +#100171 = AXIS2_PLACEMENT_3D('',#100172,#100173,#100174); +#100172 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#100173 = DIRECTION('',(-1.,-5.841707627396E-15,0.)); +#100174 = DIRECTION('',(5.841707627396E-15,-1.,0.)); +#100175 = ADVANCED_FACE('',(#100176),#100187,.F.); +#100176 = FACE_BOUND('',#100177,.F.); +#100177 = EDGE_LOOP('',(#100178,#100179,#100180,#100186)); +#100178 = ORIENTED_EDGE('',*,*,#100163,.F.); +#100179 = ORIENTED_EDGE('',*,*,#99755,.T.); +#100180 = ORIENTED_EDGE('',*,*,#100181,.T.); +#100181 = EDGE_CURVE('',#99756,#100033,#100182,.T.); +#100182 = LINE('',#100183,#100184); +#100183 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#100184 = VECTOR('',#100185,1.); +#100185 = DIRECTION('',(-0.,-0.,-1.)); +#100186 = ORIENTED_EDGE('',*,*,#100041,.F.); +#100187 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100188,#100189) + ,(#100190,#100191) + ,(#100192,#100193) + ,(#100194,#100195 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100188 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.251)); +#100189 = CARTESIAN_POINT('',(-0.363123016792,1.461437830831,3.25)); +#100190 = CARTESIAN_POINT('',(-0.38464600566,1.443969897836,3.251)); +#100191 = CARTESIAN_POINT('',(-0.38464600566,1.443969897836,3.25)); +#100192 = CARTESIAN_POINT('',(-0.408430467996,1.435079967651,3.251)); +#100193 = CARTESIAN_POINT('',(-0.408430467996,1.435079967651,3.25)); +#100194 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#100195 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.25)); +#100196 = ADVANCED_FACE('',(#100197),#100208,.F.); +#100197 = FACE_BOUND('',#100198,.F.); +#100198 = EDGE_LOOP('',(#100199,#100200,#100201,#100207)); +#100199 = ORIENTED_EDGE('',*,*,#100181,.F.); +#100200 = ORIENTED_EDGE('',*,*,#99764,.T.); +#100201 = ORIENTED_EDGE('',*,*,#100202,.T.); +#100202 = EDGE_CURVE('',#99765,#100025,#100203,.T.); +#100203 = LINE('',#100204,#100205); +#100204 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.251)); +#100205 = VECTOR('',#100206,1.); +#100206 = DIRECTION('',(-0.,-0.,-1.)); +#100207 = ORIENTED_EDGE('',*,*,#100032,.F.); +#100208 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100209,#100210) + ,(#100211,#100212) + ,(#100213,#100214) + ,(#100215,#100216 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100209 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.251)); +#100210 = CARTESIAN_POINT('',(-0.434554385644,1.435079967651,3.25)); +#100211 = CARTESIAN_POINT('',(-0.463953540727,1.435079967651,3.251)); +#100212 = CARTESIAN_POINT('',(-0.463953540727,1.435079967651,3.25)); +#100213 = CARTESIAN_POINT('',(-0.478692109191,1.452859828021,3.251)); +#100214 = CARTESIAN_POINT('',(-0.478692109191,1.452859828021,3.25)); +#100215 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.251)); +#100216 = CARTESIAN_POINT('',(-0.478692109191,1.488419548758,3.25)); +#100217 = ADVANCED_FACE('',(#100218),#100229,.F.); +#100218 = FACE_BOUND('',#100219,.T.); +#100219 = EDGE_LOOP('',(#100220,#100221,#100227,#100228)); +#100220 = ORIENTED_EDGE('',*,*,#100024,.T.); +#100221 = ORIENTED_EDGE('',*,*,#100222,.F.); +#100222 = EDGE_CURVE('',#99774,#100016,#100223,.T.); +#100223 = LINE('',#100224,#100225); +#100224 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#100225 = VECTOR('',#100226,1.); +#100226 = DIRECTION('',(-0.,-0.,-1.)); +#100227 = ORIENTED_EDGE('',*,*,#99773,.F.); +#100228 = ORIENTED_EDGE('',*,*,#100202,.T.); +#100229 = PLANE('',#100230); +#100230 = AXIS2_PLACEMENT_3D('',#100231,#100232,#100233); +#100231 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#100232 = DIRECTION('',(-0.138741688482,0.990328603988,0.)); +#100233 = DIRECTION('',(-0.990328603988,-0.138741688482,0.)); +#100234 = ADVANCED_FACE('',(#100235),#100246,.F.); +#100235 = FACE_BOUND('',#100236,.F.); +#100236 = EDGE_LOOP('',(#100237,#100238,#100239,#100245)); +#100237 = ORIENTED_EDGE('',*,*,#100222,.F.); +#100238 = ORIENTED_EDGE('',*,*,#99781,.T.); +#100239 = ORIENTED_EDGE('',*,*,#100240,.T.); +#100240 = EDGE_CURVE('',#99782,#100007,#100241,.T.); +#100241 = LINE('',#100242,#100243); +#100242 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#100243 = VECTOR('',#100244,1.); +#100244 = DIRECTION('',(-0.,-0.,-1.)); +#100245 = ORIENTED_EDGE('',*,*,#100015,.F.); +#100246 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100247,#100248) + ,(#100249,#100250) + ,(#100251,#100252) + ,(#100253,#100254 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100247 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.251)); +#100248 = CARTESIAN_POINT('',(-0.414123142588,1.49746544263,3.25)); +#100249 = CARTESIAN_POINT('',(-0.365930363167,1.504171881191,3.251)); +#100250 = CARTESIAN_POINT('',(-0.365930363167,1.504171881191,3.25)); +#100251 = CARTESIAN_POINT('',(-0.341833973456,1.527878361683,3.251)); +#100252 = CARTESIAN_POINT('',(-0.341833973456,1.527878361683,3.25)); +#100253 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#100254 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.25)); +#100255 = ADVANCED_FACE('',(#100256),#100267,.F.); +#100256 = FACE_BOUND('',#100257,.F.); +#100257 = EDGE_LOOP('',(#100258,#100259,#100260,#100266)); +#100258 = ORIENTED_EDGE('',*,*,#100240,.F.); +#100259 = ORIENTED_EDGE('',*,*,#99790,.T.); +#100260 = ORIENTED_EDGE('',*,*,#100261,.T.); +#100261 = EDGE_CURVE('',#99791,#99998,#100262,.T.); +#100262 = LINE('',#100263,#100264); +#100263 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#100264 = VECTOR('',#100265,1.); +#100265 = DIRECTION('',(-0.,-0.,-1.)); +#100266 = ORIENTED_EDGE('',*,*,#100006,.F.); +#100267 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100268,#100269) + ,(#100270,#100271) + ,(#100272,#100273) + ,(#100274,#100275 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100268 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.251)); +#100269 = CARTESIAN_POINT('',(-0.341833973456,1.568584884106,3.25)); +#100270 = CARTESIAN_POINT('',(-0.341833973456,1.588080345038,3.251)); +#100271 = CARTESIAN_POINT('',(-0.341833973456,1.588080345038,3.25)); +#100272 = CARTESIAN_POINT('',(-0.348072520954,1.603520750096,3.251)); +#100273 = CARTESIAN_POINT('',(-0.348072520954,1.603520750096,3.25)); +#100274 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#100275 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.25)); +#100276 = ADVANCED_FACE('',(#100277),#100288,.F.); +#100277 = FACE_BOUND('',#100278,.F.); +#100278 = EDGE_LOOP('',(#100279,#100280,#100281,#100287)); +#100279 = ORIENTED_EDGE('',*,*,#100261,.F.); +#100280 = ORIENTED_EDGE('',*,*,#99799,.T.); +#100281 = ORIENTED_EDGE('',*,*,#100282,.T.); +#100282 = EDGE_CURVE('',#99800,#99989,#100283,.T.); +#100283 = LINE('',#100284,#100285); +#100284 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#100285 = VECTOR('',#100286,1.); +#100286 = DIRECTION('',(-0.,-0.,-1.)); +#100287 = ORIENTED_EDGE('',*,*,#99997,.F.); +#100288 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100289,#100290) + ,(#100291,#100292) + ,(#100293,#100294) + ,(#100295,#100296 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100289 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.251)); +#100290 = CARTESIAN_POINT('',(-0.36054961595,1.614906099279,3.25)); +#100291 = CARTESIAN_POINT('',(-0.373026710945,1.626291448462,3.251)); +#100292 = CARTESIAN_POINT('',(-0.373026710945,1.626291448462,3.25)); +#100293 = CARTESIAN_POINT('',(-0.389792807346,1.632062104898,3.251)); +#100294 = CARTESIAN_POINT('',(-0.389792807346,1.632062104898,3.25)); +#100295 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#100296 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.25)); +#100297 = ADVANCED_FACE('',(#100298),#100309,.F.); +#100298 = FACE_BOUND('',#100299,.F.); +#100299 = EDGE_LOOP('',(#100300,#100301,#100302,#100308)); +#100300 = ORIENTED_EDGE('',*,*,#100282,.F.); +#100301 = ORIENTED_EDGE('',*,*,#99808,.T.); +#100302 = ORIENTED_EDGE('',*,*,#100303,.T.); +#100303 = EDGE_CURVE('',#99809,#99981,#100304,.T.); +#100304 = LINE('',#100305,#100306); +#100305 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.251)); +#100306 = VECTOR('',#100307,1.); +#100307 = DIRECTION('',(-0.,-0.,-1.)); +#100308 = ORIENTED_EDGE('',*,*,#99988,.F.); +#100309 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100310,#100311) + ,(#100312,#100313) + ,(#100314,#100315) + ,(#100316,#100317 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100310 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.251)); +#100311 = CARTESIAN_POINT('',(-0.410925886995,1.632062104898,3.25)); +#100312 = CARTESIAN_POINT('',(-0.440325042079,1.632062104898,3.251)); +#100313 = CARTESIAN_POINT('',(-0.440325042079,1.632062104898,3.25)); +#100314 = CARTESIAN_POINT('',(-0.462627849385,1.61911711884,3.251)); +#100315 = CARTESIAN_POINT('',(-0.462627849385,1.61911711884,3.25)); +#100316 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.251)); +#100317 = CARTESIAN_POINT('',(-0.477678345223,1.593227146724,3.25)); +#100318 = ADVANCED_FACE('',(#100319),#100330,.F.); +#100319 = FACE_BOUND('',#100320,.T.); +#100320 = EDGE_LOOP('',(#100321,#100322,#100328,#100329)); +#100321 = ORIENTED_EDGE('',*,*,#99980,.T.); +#100322 = ORIENTED_EDGE('',*,*,#100323,.F.); +#100323 = EDGE_CURVE('',#99818,#99973,#100324,.T.); +#100324 = LINE('',#100325,#100326); +#100325 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.251)); +#100326 = VECTOR('',#100327,1.); +#100327 = DIRECTION('',(-0.,-0.,-1.)); +#100328 = ORIENTED_EDGE('',*,*,#99817,.F.); +#100329 = ORIENTED_EDGE('',*,*,#100303,.T.); +#100330 = PLANE('',#100331); +#100331 = AXIS2_PLACEMENT_3D('',#100332,#100333,#100334); +#100332 = CARTESIAN_POINT('',(-0.478692109191,1.593227146724,3.251)); +#100333 = DIRECTION('',(2.138963716205E-13,-1.,0.)); +#100334 = DIRECTION('',(1.,2.138963716205E-13,0.)); +#100335 = ADVANCED_FACE('',(#100336),#100347,.F.); +#100336 = FACE_BOUND('',#100337,.T.); +#100337 = EDGE_LOOP('',(#100338,#100339,#100345,#100346)); +#100338 = ORIENTED_EDGE('',*,*,#99972,.T.); +#100339 = ORIENTED_EDGE('',*,*,#100340,.F.); +#100340 = EDGE_CURVE('',#99826,#99965,#100341,.T.); +#100341 = LINE('',#100342,#100343); +#100342 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.251)); +#100343 = VECTOR('',#100344,1.); +#100344 = DIRECTION('',(-0.,-0.,-1.)); +#100345 = ORIENTED_EDGE('',*,*,#99825,.F.); +#100346 = ORIENTED_EDGE('',*,*,#100323,.T.); +#100347 = PLANE('',#100348); +#100348 = AXIS2_PLACEMENT_3D('',#100349,#100350,#100351); +#100349 = CARTESIAN_POINT('',(-0.478692109191,1.626915303211,3.251)); +#100350 = DIRECTION('',(-1.,-1.287339273529E-14,0.)); +#100351 = DIRECTION('',(1.287339273529E-14,-1.,0.)); +#100352 = ADVANCED_FACE('',(#100353),#100364,.F.); +#100353 = FACE_BOUND('',#100354,.T.); +#100354 = EDGE_LOOP('',(#100355,#100356,#100362,#100363)); +#100355 = ORIENTED_EDGE('',*,*,#99964,.T.); +#100356 = ORIENTED_EDGE('',*,*,#100357,.F.); +#100357 = EDGE_CURVE('',#99834,#99957,#100358,.T.); +#100358 = LINE('',#100359,#100360); +#100359 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.251)); +#100360 = VECTOR('',#100361,1.); +#100361 = DIRECTION('',(-0.,-0.,-1.)); +#100362 = ORIENTED_EDGE('',*,*,#99833,.F.); +#100363 = ORIENTED_EDGE('',*,*,#100340,.T.); +#100364 = PLANE('',#100365); +#100365 = AXIS2_PLACEMENT_3D('',#100366,#100367,#100368); +#100366 = CARTESIAN_POINT('',(-0.516903212616,1.626915303211,3.251)); +#100367 = DIRECTION('',(5.674801695376E-15,-1.,0.)); +#100368 = DIRECTION('',(1.,5.674801695376E-15,0.)); +#100369 = ADVANCED_FACE('',(#100370),#100381,.F.); +#100370 = FACE_BOUND('',#100371,.T.); +#100371 = EDGE_LOOP('',(#100372,#100373,#100379,#100380)); +#100372 = ORIENTED_EDGE('',*,*,#99956,.T.); +#100373 = ORIENTED_EDGE('',*,*,#100374,.F.); +#100374 = EDGE_CURVE('',#99842,#99948,#100375,.T.); +#100375 = LINE('',#100376,#100377); +#100376 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#100377 = VECTOR('',#100378,1.); +#100378 = DIRECTION('',(-0.,-0.,-1.)); +#100379 = ORIENTED_EDGE('',*,*,#99841,.F.); +#100380 = ORIENTED_EDGE('',*,*,#100357,.T.); +#100381 = PLANE('',#100382); +#100382 = AXIS2_PLACEMENT_3D('',#100383,#100384,#100385); +#100383 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#100384 = DIRECTION('',(1.,6.186101959462E-15,-0.)); +#100385 = DIRECTION('',(-6.186101959462E-15,1.,0.)); +#100386 = ADVANCED_FACE('',(#100387),#100393,.F.); +#100387 = FACE_BOUND('',#100388,.F.); +#100388 = EDGE_LOOP('',(#100389,#100390,#100391,#100392)); +#100389 = ORIENTED_EDGE('',*,*,#100374,.F.); +#100390 = ORIENTED_EDGE('',*,*,#99849,.T.); +#100391 = ORIENTED_EDGE('',*,*,#100136,.T.); +#100392 = ORIENTED_EDGE('',*,*,#99947,.F.); +#100393 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100394,#100395) + ,(#100396,#100397) + ,(#100398,#100399) + ,(#100400,#100401 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100394 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.251)); +#100395 = CARTESIAN_POINT('',(-0.516903212616,1.486703948198,3.25)); +#100396 = CARTESIAN_POINT('',(-0.516903212616,1.43149280284,3.251)); +#100397 = CARTESIAN_POINT('',(-0.516903212616,1.43149280284,3.25)); +#100398 = CARTESIAN_POINT('',(-0.490623331281,1.404043193849,3.251)); +#100399 = CARTESIAN_POINT('',(-0.490623331281,1.404043193849,3.25)); +#100400 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.251)); +#100401 = CARTESIAN_POINT('',(-0.438141550455,1.404043193849,3.25)); +#100402 = ADVANCED_FACE('',(#100403),#100419,.T.); +#100403 = FACE_BOUND('',#100404,.T.); +#100404 = EDGE_LOOP('',(#100405,#100406,#100412,#100413)); +#100405 = ORIENTED_EDGE('',*,*,#100058,.F.); +#100406 = ORIENTED_EDGE('',*,*,#100407,.F.); +#100407 = EDGE_CURVE('',#99870,#100059,#100408,.T.); +#100408 = LINE('',#100409,#100410); +#100409 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.251)); +#100410 = VECTOR('',#100411,1.); +#100411 = DIRECTION('',(-0.,-0.,-1.)); +#100412 = ORIENTED_EDGE('',*,*,#99869,.T.); +#100413 = ORIENTED_EDGE('',*,*,#100414,.T.); +#100414 = EDGE_CURVE('',#99859,#100061,#100415,.T.); +#100415 = LINE('',#100416,#100417); +#100416 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#100417 = VECTOR('',#100418,1.); +#100418 = DIRECTION('',(-0.,-0.,-1.)); +#100419 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100420,#100421) + ,(#100422,#100423) + ,(#100424,#100425) + ,(#100426,#100427 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100420 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.251)); +#100421 = CARTESIAN_POINT('',(-0.427691983396,1.524447160559,3.25)); +#100422 = CARTESIAN_POINT('',(-0.409834141183,1.526942579559,3.251)); +#100423 = CARTESIAN_POINT('',(-0.409834141183,1.526942579559,3.25)); +#100424 = CARTESIAN_POINT('',(-0.397513009875,1.531309562807,3.251)); +#100425 = CARTESIAN_POINT('',(-0.397513009875,1.531309562807,3.25)); +#100426 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#100427 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.25)); +#100428 = ADVANCED_FACE('',(#100429),#100440,.T.); +#100429 = FACE_BOUND('',#100430,.T.); +#100430 = EDGE_LOOP('',(#100431,#100432,#100433,#100434)); +#100431 = ORIENTED_EDGE('',*,*,#100069,.F.); +#100432 = ORIENTED_EDGE('',*,*,#100414,.F.); +#100433 = ORIENTED_EDGE('',*,*,#99858,.T.); +#100434 = ORIENTED_EDGE('',*,*,#100435,.T.); +#100435 = EDGE_CURVE('',#99861,#100070,#100436,.T.); +#100436 = LINE('',#100437,#100438); +#100437 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#100438 = VECTOR('',#100439,1.); +#100439 = DIRECTION('',(-0.,-0.,-1.)); +#100440 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100441,#100442) + ,(#100443,#100444) + ,(#100445,#100446) + ,(#100447,#100448 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100441 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.251)); +#100442 = CARTESIAN_POINT('',(-0.390728589471,1.537860037681,3.25)); +#100443 = CARTESIAN_POINT('',(-0.38402215091,1.544410512552,3.251)); +#100444 = CARTESIAN_POINT('',(-0.38402215091,1.544410512552,3.25)); +#100445 = CARTESIAN_POINT('',(-0.380590949787,1.553612370111,3.251)); +#100446 = CARTESIAN_POINT('',(-0.380590949787,1.553612370111,3.25)); +#100447 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#100448 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.25)); +#100449 = ADVANCED_FACE('',(#100450),#100461,.T.); +#100450 = FACE_BOUND('',#100451,.T.); +#100451 = EDGE_LOOP('',(#100452,#100453,#100454,#100455)); +#100452 = ORIENTED_EDGE('',*,*,#100078,.F.); +#100453 = ORIENTED_EDGE('',*,*,#100435,.F.); +#100454 = ORIENTED_EDGE('',*,*,#99921,.T.); +#100455 = ORIENTED_EDGE('',*,*,#100456,.T.); +#100456 = EDGE_CURVE('',#99913,#100079,#100457,.T.); +#100457 = LINE('',#100458,#100459); +#100458 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#100459 = VECTOR('',#100460,1.); +#100460 = DIRECTION('',(-0.,-0.,-1.)); +#100461 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100462,#100463) + ,(#100464,#100465) + ,(#100466,#100467) + ,(#100468,#100469 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100462 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.251)); +#100463 = CARTESIAN_POINT('',(-0.380590949787,1.565465610359,3.25)); +#100464 = CARTESIAN_POINT('',(-0.380590949787,1.575915177416,3.251)); +#100465 = CARTESIAN_POINT('',(-0.380590949787,1.575915177416,3.25)); +#100466 = CARTESIAN_POINT('',(-0.384256096442,1.584337216539,3.251)); +#100467 = CARTESIAN_POINT('',(-0.384256096442,1.584337216539,3.25)); +#100468 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#100469 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.25)); +#100470 = ADVANCED_FACE('',(#100471),#100482,.T.); +#100471 = FACE_BOUND('',#100472,.T.); +#100472 = EDGE_LOOP('',(#100473,#100474,#100475,#100476)); +#100473 = ORIENTED_EDGE('',*,*,#100087,.F.); +#100474 = ORIENTED_EDGE('',*,*,#100456,.F.); +#100475 = ORIENTED_EDGE('',*,*,#99912,.T.); +#100476 = ORIENTED_EDGE('',*,*,#100477,.T.); +#100477 = EDGE_CURVE('',#99904,#100088,#100478,.T.); +#100478 = LINE('',#100479,#100480); +#100479 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#100480 = VECTOR('',#100481,1.); +#100481 = DIRECTION('',(-0.,-0.,-1.)); +#100482 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100483,#100484) + ,(#100485,#100486) + ,(#100487,#100488) + ,(#100489,#100490 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100483 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.251)); +#100484 = CARTESIAN_POINT('',(-0.391664371596,1.590887691413,3.25)); +#100485 = CARTESIAN_POINT('',(-0.398994664906,1.597438166284,3.251)); +#100486 = CARTESIAN_POINT('',(-0.398994664906,1.597438166284,3.25)); +#100487 = CARTESIAN_POINT('',(-0.408742395371,1.600713403721,3.251)); +#100488 = CARTESIAN_POINT('',(-0.408742395371,1.600713403721,3.25)); +#100489 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#100490 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.25)); +#100491 = ADVANCED_FACE('',(#100492),#100503,.T.); +#100492 = FACE_BOUND('',#100493,.T.); +#100493 = EDGE_LOOP('',(#100494,#100495,#100496,#100497)); +#100494 = ORIENTED_EDGE('',*,*,#100096,.F.); +#100495 = ORIENTED_EDGE('',*,*,#100477,.F.); +#100496 = ORIENTED_EDGE('',*,*,#99903,.T.); +#100497 = ORIENTED_EDGE('',*,*,#100498,.T.); +#100498 = EDGE_CURVE('',#99895,#100097,#100499,.T.); +#100499 = LINE('',#100500,#100501); +#100500 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#100501 = VECTOR('',#100502,1.); +#100502 = DIRECTION('',(-0.,-0.,-1.)); +#100503 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100504,#100505) + ,(#100506,#100507) + ,(#100508,#100509) + ,(#100510,#100511 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100504 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.251)); +#100505 = CARTESIAN_POINT('',(-0.420829581148,1.600713403721,3.25)); +#100506 = CARTESIAN_POINT('',(-0.437595677549,1.600713403721,3.251)); +#100507 = CARTESIAN_POINT('',(-0.437595677549,1.600713403721,3.25)); +#100508 = CARTESIAN_POINT('',(-0.451476445731,1.594786783598,3.251)); +#100509 = CARTESIAN_POINT('',(-0.451476445731,1.594786783598,3.25)); +#100510 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#100511 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.25)); +#100512 = ADVANCED_FACE('',(#100513),#100524,.T.); +#100513 = FACE_BOUND('',#100514,.T.); +#100514 = EDGE_LOOP('',(#100515,#100516,#100517,#100518)); +#100515 = ORIENTED_EDGE('',*,*,#100105,.F.); +#100516 = ORIENTED_EDGE('',*,*,#100498,.F.); +#100517 = ORIENTED_EDGE('',*,*,#99894,.T.); +#100518 = ORIENTED_EDGE('',*,*,#100519,.T.); +#100519 = EDGE_CURVE('',#99887,#100106,#100520,.T.); +#100520 = LINE('',#100521,#100522); +#100521 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#100522 = VECTOR('',#100523,1.); +#100523 = DIRECTION('',(-0.,-0.,-1.)); +#100524 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100525,#100526) + ,(#100527,#100528) + ,(#100529,#100530) + ,(#100531,#100532 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100525 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.251)); +#100526 = CARTESIAN_POINT('',(-0.462315922009,1.582933543351,3.25)); +#100527 = CARTESIAN_POINT('',(-0.47323338013,1.571236266794,3.251)); +#100528 = CARTESIAN_POINT('',(-0.47323338013,1.571236266794,3.25)); +#100529 = CARTESIAN_POINT('',(-0.478692109191,1.556419716486,3.251)); +#100530 = CARTESIAN_POINT('',(-0.478692109191,1.556419716486,3.25)); +#100531 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#100532 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.25)); +#100533 = ADVANCED_FACE('',(#100534),#100545,.T.); +#100534 = FACE_BOUND('',#100535,.T.); +#100535 = EDGE_LOOP('',(#100536,#100537,#100538,#100539)); +#100536 = ORIENTED_EDGE('',*,*,#100114,.F.); +#100537 = ORIENTED_EDGE('',*,*,#100519,.F.); +#100538 = ORIENTED_EDGE('',*,*,#99886,.T.); +#100539 = ORIENTED_EDGE('',*,*,#100540,.T.); +#100540 = EDGE_CURVE('',#99879,#100115,#100541,.T.); +#100541 = LINE('',#100542,#100543); +#100542 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.251)); +#100543 = VECTOR('',#100544,1.); +#100544 = DIRECTION('',(-0.,-0.,-1.)); +#100545 = PLANE('',#100546); +#100546 = AXIS2_PLACEMENT_3D('',#100547,#100548,#100549); +#100547 = CARTESIAN_POINT('',(-0.478692109191,1.53848389243,3.251)); +#100548 = DIRECTION('',(1.,0.,-0.)); +#100549 = DIRECTION('',(-0.,0.,-1.)); +#100550 = ADVANCED_FACE('',(#100551),#100557,.T.); +#100551 = FACE_BOUND('',#100552,.T.); +#100552 = EDGE_LOOP('',(#100553,#100554,#100555,#100556)); +#100553 = ORIENTED_EDGE('',*,*,#100122,.F.); +#100554 = ORIENTED_EDGE('',*,*,#100540,.F.); +#100555 = ORIENTED_EDGE('',*,*,#99878,.T.); +#100556 = ORIENTED_EDGE('',*,*,#100407,.T.); +#100557 = PLANE('',#100558); +#100558 = AXIS2_PLACEMENT_3D('',#100559,#100560,#100561); +#100559 = CARTESIAN_POINT('',(-0.478692109191,1.517584758311,3.251)); +#100560 = DIRECTION('',(-0.133354764894,0.9910683663,0.)); +#100561 = DIRECTION('',(-0.9910683663,-0.133354764894,0.)); +#100562 = MANIFOLD_SOLID_BREP('',#100563); +#100563 = CLOSED_SHELL('',(#100564,#100610,#100641,#100678,#100715, + #100752,#100789,#100826,#100863,#100900,#100937,#100974,#101011, + #101042,#101079,#101116,#101153,#101190,#101227,#101264,#101301, + #101329,#101358)); +#100564 = ADVANCED_FACE('',(#100565),#100601,.F.); +#100565 = FACE_BOUND('',#100566,.F.); +#100566 = EDGE_LOOP('',(#100567,#100577,#100586,#100594)); +#100567 = ORIENTED_EDGE('',*,*,#100568,.F.); +#100568 = EDGE_CURVE('',#100569,#100571,#100573,.T.); +#100569 = VERTEX_POINT('',#100570); +#100570 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#100571 = VERTEX_POINT('',#100572); +#100572 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.25)); +#100573 = LINE('',#100574,#100575); +#100574 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#100575 = VECTOR('',#100576,1.); +#100576 = DIRECTION('',(-0.,-0.,-1.)); +#100577 = ORIENTED_EDGE('',*,*,#100578,.T.); +#100578 = EDGE_CURVE('',#100569,#100579,#100581,.T.); +#100579 = VERTEX_POINT('',#100580); +#100580 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.251)); +#100581 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100582,#100583,#100584, + #100585),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100582 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#100583 = CARTESIAN_POINT('',(-0.609077751897,1.600869367408,3.251)); +#100584 = CARTESIAN_POINT('',(-0.588178617779,1.593851001473,3.251)); +#100585 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.251)); +#100586 = ORIENTED_EDGE('',*,*,#100587,.T.); +#100587 = EDGE_CURVE('',#100579,#100588,#100590,.T.); +#100588 = VERTEX_POINT('',#100589); +#100589 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.25)); +#100590 = LINE('',#100591,#100592); +#100591 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.251)); +#100592 = VECTOR('',#100593,1.); +#100593 = DIRECTION('',(-0.,-0.,-1.)); +#100594 = ORIENTED_EDGE('',*,*,#100595,.F.); +#100595 = EDGE_CURVE('',#100571,#100588,#100596,.T.); +#100596 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100597,#100598,#100599, + #100600),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100597 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.25)); +#100598 = CARTESIAN_POINT('',(-0.609077751897,1.600869367408,3.25)); +#100599 = CARTESIAN_POINT('',(-0.588178617779,1.593851001473,3.25)); +#100600 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.25)); +#100601 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100602,#100603) + ,(#100604,#100605) + ,(#100606,#100607) + ,(#100608,#100609 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100602 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#100603 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.25)); +#100604 = CARTESIAN_POINT('',(-0.609077751897,1.600869367408,3.251)); +#100605 = CARTESIAN_POINT('',(-0.609077751897,1.600869367408,3.25)); +#100606 = CARTESIAN_POINT('',(-0.588178617779,1.593851001473,3.251)); +#100607 = CARTESIAN_POINT('',(-0.588178617779,1.593851001473,3.25)); +#100608 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.251)); +#100609 = CARTESIAN_POINT('',(-0.568683156849,1.579814269604,3.25)); +#100610 = ADVANCED_FACE('',(#100611),#100636,.F.); +#100611 = FACE_BOUND('',#100612,.T.); +#100612 = EDGE_LOOP('',(#100613,#100621,#100629,#100635)); +#100613 = ORIENTED_EDGE('',*,*,#100614,.T.); +#100614 = EDGE_CURVE('',#100588,#100615,#100617,.T.); +#100615 = VERTEX_POINT('',#100616); +#100616 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.25)); +#100617 = LINE('',#100618,#100619); +#100618 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.25)); +#100619 = VECTOR('',#100620,1.); +#100620 = DIRECTION('',(-1.099072265152E-14,1.,-0.)); +#100621 = ORIENTED_EDGE('',*,*,#100622,.F.); +#100622 = EDGE_CURVE('',#100623,#100615,#100625,.T.); +#100623 = VERTEX_POINT('',#100624); +#100624 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100625 = LINE('',#100626,#100627); +#100626 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100627 = VECTOR('',#100628,1.); +#100628 = DIRECTION('',(-0.,-0.,-1.)); +#100629 = ORIENTED_EDGE('',*,*,#100630,.F.); +#100630 = EDGE_CURVE('',#100579,#100623,#100631,.T.); +#100631 = LINE('',#100632,#100633); +#100632 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100633 = VECTOR('',#100634,1.); +#100634 = DIRECTION('',(-1.099072265152E-14,1.,-0.)); +#100635 = ORIENTED_EDGE('',*,*,#100587,.T.); +#100636 = PLANE('',#100637); +#100637 = AXIS2_PLACEMENT_3D('',#100638,#100639,#100640); +#100638 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100639 = DIRECTION('',(-1.,-1.099072265152E-14,0.)); +#100640 = DIRECTION('',(1.099072265152E-14,-1.,0.)); +#100641 = ADVANCED_FACE('',(#100642),#100669,.F.); +#100642 = FACE_BOUND('',#100643,.F.); +#100643 = EDGE_LOOP('',(#100644,#100645,#100654,#100662)); +#100644 = ORIENTED_EDGE('',*,*,#100622,.F.); +#100645 = ORIENTED_EDGE('',*,*,#100646,.T.); +#100646 = EDGE_CURVE('',#100623,#100647,#100649,.T.); +#100647 = VERTEX_POINT('',#100648); +#100648 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100649 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100650,#100651,#100652, + #100653),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#100650 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100651 = CARTESIAN_POINT('',(-0.585527235093,1.62769512165,3.251)); +#100652 = CARTESIAN_POINT('',(-0.605178659711,1.632062104898,3.251)); +#100653 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100654 = ORIENTED_EDGE('',*,*,#100655,.T.); +#100655 = EDGE_CURVE('',#100647,#100656,#100658,.T.); +#100656 = VERTEX_POINT('',#100657); +#100657 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.25)); +#100658 = LINE('',#100659,#100660); +#100659 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100660 = VECTOR('',#100661,1.); +#100661 = DIRECTION('',(-0.,-0.,-1.)); +#100662 = ORIENTED_EDGE('',*,*,#100663,.F.); +#100663 = EDGE_CURVE('',#100615,#100656,#100664,.T.); +#100664 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100665,#100666,#100667, + #100668),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#100665 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.25)); +#100666 = CARTESIAN_POINT('',(-0.585527235093,1.62769512165,3.25)); +#100667 = CARTESIAN_POINT('',(-0.605178659711,1.632062104898,3.25)); +#100668 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.25)); +#100669 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100670,#100671) + ,(#100672,#100673) + ,(#100674,#100675) + ,(#100676,#100677 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100670 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.251)); +#100671 = CARTESIAN_POINT('',(-0.568683156849,1.619273082527,3.25)); +#100672 = CARTESIAN_POINT('',(-0.585527235093,1.62769512165,3.251)); +#100673 = CARTESIAN_POINT('',(-0.585527235093,1.62769512165,3.25)); +#100674 = CARTESIAN_POINT('',(-0.605178659711,1.632062104898,3.251)); +#100675 = CARTESIAN_POINT('',(-0.605178659711,1.632062104898,3.25)); +#100676 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100677 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.25)); +#100678 = ADVANCED_FACE('',(#100679),#100706,.F.); +#100679 = FACE_BOUND('',#100680,.F.); +#100680 = EDGE_LOOP('',(#100681,#100682,#100691,#100699)); +#100681 = ORIENTED_EDGE('',*,*,#100655,.F.); +#100682 = ORIENTED_EDGE('',*,*,#100683,.T.); +#100683 = EDGE_CURVE('',#100647,#100684,#100686,.T.); +#100684 = VERTEX_POINT('',#100685); +#100685 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100686 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100687,#100688,#100689, + #100690),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#100687 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100688 = CARTESIAN_POINT('',(-0.653761348351,1.632062104898,3.251)); +#100689 = CARTESIAN_POINT('',(-0.674972409844,1.626291448462,3.251)); +#100690 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100691 = ORIENTED_EDGE('',*,*,#100692,.T.); +#100692 = EDGE_CURVE('',#100684,#100693,#100695,.T.); +#100693 = VERTEX_POINT('',#100694); +#100694 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.25)); +#100695 = LINE('',#100696,#100697); +#100696 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100697 = VECTOR('',#100698,1.); +#100698 = DIRECTION('',(-0.,-0.,-1.)); +#100699 = ORIENTED_EDGE('',*,*,#100700,.F.); +#100700 = EDGE_CURVE('',#100656,#100693,#100701,.T.); +#100701 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100702,#100703,#100704, + #100705),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#100702 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.25)); +#100703 = CARTESIAN_POINT('',(-0.653761348351,1.632062104898,3.25)); +#100704 = CARTESIAN_POINT('',(-0.674972409844,1.626291448462,3.25)); +#100705 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.25)); +#100706 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100707,#100708) + ,(#100709,#100710) + ,(#100711,#100712) + ,(#100713,#100714 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100707 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.251)); +#100708 = CARTESIAN_POINT('',(-0.627793394392,1.632062104898,3.25)); +#100709 = CARTESIAN_POINT('',(-0.653761348351,1.632062104898,3.251)); +#100710 = CARTESIAN_POINT('',(-0.653761348351,1.632062104898,3.25)); +#100711 = CARTESIAN_POINT('',(-0.674972409844,1.626291448462,3.251)); +#100712 = CARTESIAN_POINT('',(-0.674972409844,1.626291448462,3.25)); +#100713 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100714 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.25)); +#100715 = ADVANCED_FACE('',(#100716),#100743,.F.); +#100716 = FACE_BOUND('',#100717,.F.); +#100717 = EDGE_LOOP('',(#100718,#100719,#100728,#100736)); +#100718 = ORIENTED_EDGE('',*,*,#100692,.F.); +#100719 = ORIENTED_EDGE('',*,*,#100720,.T.); +#100720 = EDGE_CURVE('',#100684,#100721,#100723,.T.); +#100721 = VERTEX_POINT('',#100722); +#100722 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100723 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100724,#100725,#100726, + #100727),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#100724 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100725 = CARTESIAN_POINT('',(-0.707646802364,1.603364786407,3.251)); +#100726 = CARTESIAN_POINT('',(-0.715834895955,1.587612453976,3.251)); +#100727 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100728 = ORIENTED_EDGE('',*,*,#100729,.T.); +#100729 = EDGE_CURVE('',#100721,#100730,#100732,.T.); +#100730 = VERTEX_POINT('',#100731); +#100731 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.25)); +#100732 = LINE('',#100733,#100734); +#100733 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100734 = VECTOR('',#100735,1.); +#100735 = DIRECTION('',(-0.,-0.,-1.)); +#100736 = ORIENTED_EDGE('',*,*,#100737,.F.); +#100737 = EDGE_CURVE('',#100693,#100730,#100738,.T.); +#100738 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100739,#100740,#100741, + #100742),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#100739 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.25)); +#100740 = CARTESIAN_POINT('',(-0.707646802364,1.603364786407,3.25)); +#100741 = CARTESIAN_POINT('',(-0.715834895955,1.587612453976,3.25)); +#100742 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.25)); +#100743 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100744,#100745) + ,(#100746,#100747) + ,(#100748,#100749) + ,(#100750,#100751 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100744 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.251)); +#100745 = CARTESIAN_POINT('',(-0.691270615182,1.614750135592,3.25)); +#100746 = CARTESIAN_POINT('',(-0.707646802364,1.603364786407,3.251)); +#100747 = CARTESIAN_POINT('',(-0.707646802364,1.603364786407,3.25)); +#100748 = CARTESIAN_POINT('',(-0.715834895955,1.587612453976,3.251)); +#100749 = CARTESIAN_POINT('',(-0.715834895955,1.587612453976,3.25)); +#100750 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100751 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.25)); +#100752 = ADVANCED_FACE('',(#100753),#100780,.F.); +#100753 = FACE_BOUND('',#100754,.F.); +#100754 = EDGE_LOOP('',(#100755,#100756,#100765,#100773)); +#100755 = ORIENTED_EDGE('',*,*,#100729,.F.); +#100756 = ORIENTED_EDGE('',*,*,#100757,.T.); +#100757 = EDGE_CURVE('',#100721,#100758,#100760,.T.); +#100758 = VERTEX_POINT('',#100759); +#100759 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100760 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100761,#100762,#100763, + #100764),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#100761 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100762 = CARTESIAN_POINT('',(-0.715834895955,1.553300442737,3.251)); +#100763 = CARTESIAN_POINT('',(-0.71154589455,1.541291238803,3.251)); +#100764 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100765 = ORIENTED_EDGE('',*,*,#100766,.T.); +#100766 = EDGE_CURVE('',#100758,#100767,#100769,.T.); +#100767 = VERTEX_POINT('',#100768); +#100768 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.25)); +#100769 = LINE('',#100770,#100771); +#100770 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100771 = VECTOR('',#100772,1.); +#100772 = DIRECTION('',(-0.,-0.,-1.)); +#100773 = ORIENTED_EDGE('',*,*,#100774,.F.); +#100774 = EDGE_CURVE('',#100730,#100767,#100775,.T.); +#100775 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100776,#100777,#100778, + #100779),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#100776 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.25)); +#100777 = CARTESIAN_POINT('',(-0.715834895955,1.553300442737,3.25)); +#100778 = CARTESIAN_POINT('',(-0.71154589455,1.541291238803,3.25)); +#100779 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.25)); +#100780 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100781,#100782) + ,(#100783,#100784) + ,(#100785,#100786) + ,(#100787,#100788 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100781 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.251)); +#100782 = CARTESIAN_POINT('',(-0.715834895955,1.567649101982,3.25)); +#100783 = CARTESIAN_POINT('',(-0.715834895955,1.553300442737,3.251)); +#100784 = CARTESIAN_POINT('',(-0.715834895955,1.553300442737,3.25)); +#100785 = CARTESIAN_POINT('',(-0.71154589455,1.541291238803,3.251)); +#100786 = CARTESIAN_POINT('',(-0.71154589455,1.541291238803,3.25)); +#100787 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100788 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.25)); +#100789 = ADVANCED_FACE('',(#100790),#100817,.F.); +#100790 = FACE_BOUND('',#100791,.F.); +#100791 = EDGE_LOOP('',(#100792,#100793,#100802,#100810)); +#100792 = ORIENTED_EDGE('',*,*,#100766,.F.); +#100793 = ORIENTED_EDGE('',*,*,#100794,.T.); +#100794 = EDGE_CURVE('',#100758,#100795,#100797,.T.); +#100795 = VERTEX_POINT('',#100796); +#100796 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100797 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100798,#100799,#100800, + #100801),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#100798 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100799 = CARTESIAN_POINT('',(-0.694467870775,1.52195174156,3.251)); +#100800 = CARTESIAN_POINT('',(-0.678091683593,1.512437956626,3.251)); +#100801 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100802 = ORIENTED_EDGE('',*,*,#100803,.T.); +#100803 = EDGE_CURVE('',#100795,#100804,#100806,.T.); +#100804 = VERTEX_POINT('',#100805); +#100805 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.25)); +#100806 = LINE('',#100807,#100808); +#100807 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100808 = VECTOR('',#100809,1.); +#100809 = DIRECTION('',(-0.,-0.,-1.)); +#100810 = ORIENTED_EDGE('',*,*,#100811,.F.); +#100811 = EDGE_CURVE('',#100767,#100804,#100812,.T.); +#100812 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100813,#100814,#100815, + #100816),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#100813 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.25)); +#100814 = CARTESIAN_POINT('',(-0.694467870775,1.52195174156,3.25)); +#100815 = CARTESIAN_POINT('',(-0.678091683593,1.512437956626,3.25)); +#100816 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.25)); +#100817 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100818,#100819) + ,(#100820,#100821) + ,(#100822,#100823) + ,(#100824,#100825 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100818 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.251)); +#100819 = CARTESIAN_POINT('',(-0.703045873584,1.531621490181,3.25)); +#100820 = CARTESIAN_POINT('',(-0.694467870775,1.52195174156,3.251)); +#100821 = CARTESIAN_POINT('',(-0.694467870775,1.52195174156,3.25)); +#100822 = CARTESIAN_POINT('',(-0.678091683593,1.512437956626,3.251)); +#100823 = CARTESIAN_POINT('',(-0.678091683593,1.512437956626,3.25)); +#100824 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100825 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.25)); +#100826 = ADVANCED_FACE('',(#100827),#100854,.F.); +#100827 = FACE_BOUND('',#100828,.F.); +#100828 = EDGE_LOOP('',(#100829,#100830,#100839,#100847)); +#100829 = ORIENTED_EDGE('',*,*,#100803,.F.); +#100830 = ORIENTED_EDGE('',*,*,#100831,.T.); +#100831 = EDGE_CURVE('',#100795,#100832,#100834,.T.); +#100832 = VERTEX_POINT('',#100833); +#100833 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100834 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100835,#100836,#100837, + #100838),.UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.), + .PIECEWISE_BEZIER_KNOTS.); +#100835 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100836 = CARTESIAN_POINT('',(-0.634577814795,1.495905805757,3.251)); +#100837 = CARTESIAN_POINT('',(-0.622256683487,1.489667258258,3.251)); +#100838 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100839 = ORIENTED_EDGE('',*,*,#100840,.T.); +#100840 = EDGE_CURVE('',#100832,#100841,#100843,.T.); +#100841 = VERTEX_POINT('',#100842); +#100842 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.25)); +#100843 = LINE('',#100844,#100845); +#100844 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100845 = VECTOR('',#100846,1.); +#100846 = DIRECTION('',(-0.,-0.,-1.)); +#100847 = ORIENTED_EDGE('',*,*,#100848,.F.); +#100848 = EDGE_CURVE('',#100804,#100841,#100849,.T.); +#100849 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100850,#100851,#100852, + #100853),.UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.), + .PIECEWISE_BEZIER_KNOTS.); +#100850 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.25)); +#100851 = CARTESIAN_POINT('',(-0.634577814795,1.495905805757,3.25)); +#100852 = CARTESIAN_POINT('',(-0.622256683487,1.489667258258,3.25)); +#100853 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.25)); +#100854 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100855,#100856) + ,(#100857,#100858) + ,(#100859,#100860) + ,(#100861,#100862 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(14.,15.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100855 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.251)); +#100856 = CARTESIAN_POINT('',(-0.653761348351,1.503392062754,3.25)); +#100857 = CARTESIAN_POINT('',(-0.634577814795,1.495905805757,3.251)); +#100858 = CARTESIAN_POINT('',(-0.634577814795,1.495905805757,3.25)); +#100859 = CARTESIAN_POINT('',(-0.622256683487,1.489667258258,3.251)); +#100860 = CARTESIAN_POINT('',(-0.622256683487,1.489667258258,3.25)); +#100861 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100862 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.25)); +#100863 = ADVANCED_FACE('',(#100864),#100891,.F.); +#100864 = FACE_BOUND('',#100865,.F.); +#100865 = EDGE_LOOP('',(#100866,#100867,#100876,#100884)); +#100866 = ORIENTED_EDGE('',*,*,#100840,.F.); +#100867 = ORIENTED_EDGE('',*,*,#100868,.T.); +#100868 = EDGE_CURVE('',#100832,#100869,#100871,.T.); +#100869 = VERTEX_POINT('',#100870); +#100870 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100871 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100872,#100873,#100874, + #100875),.UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.), + .PIECEWISE_BEZIER_KNOTS.); +#100872 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100873 = CARTESIAN_POINT('',(-0.611105279834,1.47984154595,3.251)); +#100874 = CARTESIAN_POINT('',(-0.60829793346,1.473135107389,3.251)); +#100875 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100876 = ORIENTED_EDGE('',*,*,#100877,.T.); +#100877 = EDGE_CURVE('',#100869,#100878,#100880,.T.); +#100878 = VERTEX_POINT('',#100879); +#100879 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.25)); +#100880 = LINE('',#100881,#100882); +#100881 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100882 = VECTOR('',#100883,1.); +#100883 = DIRECTION('',(-0.,-0.,-1.)); +#100884 = ORIENTED_EDGE('',*,*,#100885,.F.); +#100885 = EDGE_CURVE('',#100841,#100878,#100886,.T.); +#100886 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100887,#100888,#100889, + #100890),.UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.), + .PIECEWISE_BEZIER_KNOTS.); +#100887 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.25)); +#100888 = CARTESIAN_POINT('',(-0.611105279834,1.47984154595,3.25)); +#100889 = CARTESIAN_POINT('',(-0.60829793346,1.473135107389,3.25)); +#100890 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.25)); +#100891 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100892,#100893) + ,(#100894,#100895) + ,(#100896,#100897) + ,(#100898,#100899 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(13.,14.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100892 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.251)); +#100893 = CARTESIAN_POINT('',(-0.616641990738,1.484676420259,3.25)); +#100894 = CARTESIAN_POINT('',(-0.611105279834,1.47984154595,3.251)); +#100895 = CARTESIAN_POINT('',(-0.611105279834,1.47984154595,3.25)); +#100896 = CARTESIAN_POINT('',(-0.60829793346,1.473135107389,3.251)); +#100897 = CARTESIAN_POINT('',(-0.60829793346,1.473135107389,3.25)); +#100898 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100899 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.25)); +#100900 = ADVANCED_FACE('',(#100901),#100928,.F.); +#100901 = FACE_BOUND('',#100902,.F.); +#100902 = EDGE_LOOP('',(#100903,#100904,#100913,#100921)); +#100903 = ORIENTED_EDGE('',*,*,#100877,.F.); +#100904 = ORIENTED_EDGE('',*,*,#100905,.T.); +#100905 = EDGE_CURVE('',#100869,#100906,#100908,.T.); +#100906 = VERTEX_POINT('',#100907); +#100907 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100908 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100909,#100910,#100911, + #100912),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#100909 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100910 = CARTESIAN_POINT('',(-0.60829793346,1.455667174396,3.251)); +#100911 = CARTESIAN_POINT('',(-0.612197025647,1.448492844773,3.251)); +#100912 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100913 = ORIENTED_EDGE('',*,*,#100914,.T.); +#100914 = EDGE_CURVE('',#100906,#100915,#100917,.T.); +#100915 = VERTEX_POINT('',#100916); +#100916 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.25)); +#100917 = LINE('',#100918,#100919); +#100918 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100919 = VECTOR('',#100920,1.); +#100920 = DIRECTION('',(-0.,-0.,-1.)); +#100921 = ORIENTED_EDGE('',*,*,#100922,.F.); +#100922 = EDGE_CURVE('',#100878,#100915,#100923,.T.); +#100923 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100924,#100925,#100926, + #100927),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#100924 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.25)); +#100925 = CARTESIAN_POINT('',(-0.60829793346,1.455667174396,3.25)); +#100926 = CARTESIAN_POINT('',(-0.612197025647,1.448492844773,3.25)); +#100927 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.25)); +#100928 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100929,#100930) + ,(#100931,#100932) + ,(#100933,#100934) + ,(#100935,#100936 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100929 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.251)); +#100930 = CARTESIAN_POINT('',(-0.60829793346,1.464401140891,3.25)); +#100931 = CARTESIAN_POINT('',(-0.60829793346,1.455667174396,3.251)); +#100932 = CARTESIAN_POINT('',(-0.60829793346,1.455667174396,3.25)); +#100933 = CARTESIAN_POINT('',(-0.612197025647,1.448492844773,3.251)); +#100934 = CARTESIAN_POINT('',(-0.612197025647,1.448492844773,3.25)); +#100935 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100936 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.25)); +#100937 = ADVANCED_FACE('',(#100938),#100965,.F.); +#100938 = FACE_BOUND('',#100939,.F.); +#100939 = EDGE_LOOP('',(#100940,#100941,#100950,#100958)); +#100940 = ORIENTED_EDGE('',*,*,#100914,.F.); +#100941 = ORIENTED_EDGE('',*,*,#100942,.T.); +#100942 = EDGE_CURVE('',#100906,#100943,#100945,.T.); +#100943 = VERTEX_POINT('',#100944); +#100944 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#100945 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100946,#100947,#100948, + #100949),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#100946 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100947 = CARTESIAN_POINT('',(-0.627637430703,1.437731350339,3.251)); +#100948 = CARTESIAN_POINT('',(-0.637697088545,1.435079967651,3.251)); +#100949 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#100950 = ORIENTED_EDGE('',*,*,#100951,.T.); +#100951 = EDGE_CURVE('',#100943,#100952,#100954,.T.); +#100952 = VERTEX_POINT('',#100953); +#100953 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.25)); +#100954 = LINE('',#100955,#100956); +#100955 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#100956 = VECTOR('',#100957,1.); +#100957 = DIRECTION('',(-0.,-0.,-1.)); +#100958 = ORIENTED_EDGE('',*,*,#100959,.F.); +#100959 = EDGE_CURVE('',#100915,#100952,#100960,.T.); +#100960 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100961,#100962,#100963, + #100964),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#100961 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.25)); +#100962 = CARTESIAN_POINT('',(-0.627637430703,1.437731350339,3.25)); +#100963 = CARTESIAN_POINT('',(-0.637697088545,1.435079967651,3.25)); +#100964 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.25)); +#100965 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#100966,#100967) + ,(#100968,#100969) + ,(#100970,#100971) + ,(#100972,#100973 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#100966 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.251)); +#100967 = CARTESIAN_POINT('',(-0.619917228175,1.4431900794,3.25)); +#100968 = CARTESIAN_POINT('',(-0.627637430703,1.437731350339,3.251)); +#100969 = CARTESIAN_POINT('',(-0.627637430703,1.437731350339,3.25)); +#100970 = CARTESIAN_POINT('',(-0.637697088545,1.435079967651,3.251)); +#100971 = CARTESIAN_POINT('',(-0.637697088545,1.435079967651,3.25)); +#100972 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#100973 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.25)); +#100974 = ADVANCED_FACE('',(#100975),#101002,.F.); +#100975 = FACE_BOUND('',#100976,.F.); +#100976 = EDGE_LOOP('',(#100977,#100978,#100987,#100995)); +#100977 = ORIENTED_EDGE('',*,*,#100951,.F.); +#100978 = ORIENTED_EDGE('',*,*,#100979,.T.); +#100979 = EDGE_CURVE('',#100943,#100980,#100982,.T.); +#100980 = VERTEX_POINT('',#100981); +#100981 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.251)); +#100982 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100983,#100984,#100985, + #100986),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#100983 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#100984 = CARTESIAN_POINT('',(-0.67068340844,1.435079967651,3.251)); +#100985 = CARTESIAN_POINT('',(-0.689087123558,1.440382733025,3.251)); +#100986 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.251)); +#100987 = ORIENTED_EDGE('',*,*,#100988,.T.); +#100988 = EDGE_CURVE('',#100980,#100989,#100991,.T.); +#100989 = VERTEX_POINT('',#100990); +#100990 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.25)); +#100991 = LINE('',#100992,#100993); +#100992 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.251)); +#100993 = VECTOR('',#100994,1.); +#100994 = DIRECTION('',(-0.,-0.,-1.)); +#100995 = ORIENTED_EDGE('',*,*,#100996,.F.); +#100996 = EDGE_CURVE('',#100952,#100989,#100997,.T.); +#100997 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#100998,#100999,#101000, + #101001),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#100998 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.25)); +#100999 = CARTESIAN_POINT('',(-0.67068340844,1.435079967651,3.25)); +#101000 = CARTESIAN_POINT('',(-0.689087123558,1.440382733025,3.25)); +#101001 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.25)); +#101002 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101003,#101004) + ,(#101005,#101006) + ,(#101007,#101008) + ,(#101009,#101010 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101003 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.251)); +#101004 = CARTESIAN_POINT('',(-0.650018219852,1.435079967651,3.25)); +#101005 = CARTESIAN_POINT('',(-0.67068340844,1.435079967651,3.251)); +#101006 = CARTESIAN_POINT('',(-0.67068340844,1.435079967651,3.25)); +#101007 = CARTESIAN_POINT('',(-0.689087123558,1.440382733025,3.251)); +#101008 = CARTESIAN_POINT('',(-0.689087123558,1.440382733025,3.25)); +#101009 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.251)); +#101010 = CARTESIAN_POINT('',(-0.705385328897,1.450832300084,3.25)); +#101011 = ADVANCED_FACE('',(#101012),#101037,.F.); +#101012 = FACE_BOUND('',#101013,.T.); +#101013 = EDGE_LOOP('',(#101014,#101022,#101030,#101036)); +#101014 = ORIENTED_EDGE('',*,*,#101015,.T.); +#101015 = EDGE_CURVE('',#100989,#101016,#101018,.T.); +#101016 = VERTEX_POINT('',#101017); +#101017 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.25)); +#101018 = LINE('',#101019,#101020); +#101019 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.25)); +#101020 = VECTOR('',#101021,1.); +#101021 = DIRECTION('',(-0.,-1.,-0.)); +#101022 = ORIENTED_EDGE('',*,*,#101023,.F.); +#101023 = EDGE_CURVE('',#101024,#101016,#101026,.T.); +#101024 = VERTEX_POINT('',#101025); +#101025 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101026 = LINE('',#101027,#101028); +#101027 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101028 = VECTOR('',#101029,1.); +#101029 = DIRECTION('',(-0.,-0.,-1.)); +#101030 = ORIENTED_EDGE('',*,*,#101031,.F.); +#101031 = EDGE_CURVE('',#100980,#101024,#101032,.T.); +#101032 = LINE('',#101033,#101034); +#101033 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101034 = VECTOR('',#101035,1.); +#101035 = DIRECTION('',(-0.,-1.,-0.)); +#101036 = ORIENTED_EDGE('',*,*,#100988,.T.); +#101037 = PLANE('',#101038); +#101038 = AXIS2_PLACEMENT_3D('',#101039,#101040,#101041); +#101039 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101040 = DIRECTION('',(1.,0.,0.)); +#101041 = DIRECTION('',(0.,0.,-1.)); +#101042 = ADVANCED_FACE('',(#101043),#101070,.F.); +#101043 = FACE_BOUND('',#101044,.F.); +#101044 = EDGE_LOOP('',(#101045,#101046,#101055,#101063)); +#101045 = ORIENTED_EDGE('',*,*,#101023,.F.); +#101046 = ORIENTED_EDGE('',*,*,#101047,.T.); +#101047 = EDGE_CURVE('',#101024,#101048,#101050,.T.); +#101048 = VERTEX_POINT('',#101049); +#101049 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101050 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101051,#101052,#101053, + #101054),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#101051 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101052 = CARTESIAN_POINT('',(-0.689477032776,1.407162467599,3.251)); +#101053 = CARTESIAN_POINT('',(-0.672321027157,1.404043193849,3.251)); +#101054 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101055 = ORIENTED_EDGE('',*,*,#101056,.T.); +#101056 = EDGE_CURVE('',#101048,#101057,#101059,.T.); +#101057 = VERTEX_POINT('',#101058); +#101058 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.25)); +#101059 = LINE('',#101060,#101061); +#101060 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101061 = VECTOR('',#101062,1.); +#101062 = DIRECTION('',(-0.,-0.,-1.)); +#101063 = ORIENTED_EDGE('',*,*,#101064,.F.); +#101064 = EDGE_CURVE('',#101016,#101057,#101065,.T.); +#101065 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101066,#101067,#101068, + #101069),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#101066 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.25)); +#101067 = CARTESIAN_POINT('',(-0.689477032776,1.407162467599,3.25)); +#101068 = CARTESIAN_POINT('',(-0.672321027157,1.404043193849,3.25)); +#101069 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.25)); +#101070 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101071,#101072) + ,(#101073,#101074) + ,(#101075,#101076) + ,(#101077,#101078 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101071 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.251)); +#101072 = CARTESIAN_POINT('',(-0.705385328897,1.413712942472,3.25)); +#101073 = CARTESIAN_POINT('',(-0.689477032776,1.407162467599,3.251)); +#101074 = CARTESIAN_POINT('',(-0.689477032776,1.407162467599,3.25)); +#101075 = CARTESIAN_POINT('',(-0.672321027157,1.404043193849,3.251)); +#101076 = CARTESIAN_POINT('',(-0.672321027157,1.404043193849,3.25)); +#101077 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101078 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.25)); +#101079 = ADVANCED_FACE('',(#101080),#101107,.F.); +#101080 = FACE_BOUND('',#101081,.F.); +#101081 = EDGE_LOOP('',(#101082,#101083,#101092,#101100)); +#101082 = ORIENTED_EDGE('',*,*,#101056,.F.); +#101083 = ORIENTED_EDGE('',*,*,#101084,.T.); +#101084 = EDGE_CURVE('',#101048,#101085,#101087,.T.); +#101085 = VERTEX_POINT('',#101086); +#101086 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101087 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101088,#101089,#101090, + #101091),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#101088 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101089 = CARTESIAN_POINT('',(-0.629898904172,1.404043193849,3.251)); +#101090 = CARTESIAN_POINT('',(-0.609779588491,1.409813850284,3.251)); +#101091 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101092 = ORIENTED_EDGE('',*,*,#101093,.T.); +#101093 = EDGE_CURVE('',#101085,#101094,#101096,.T.); +#101094 = VERTEX_POINT('',#101095); +#101095 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.25)); +#101096 = LINE('',#101097,#101098); +#101097 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101098 = VECTOR('',#101099,1.); +#101099 = DIRECTION('',(-0.,-0.,-1.)); +#101100 = ORIENTED_EDGE('',*,*,#101101,.F.); +#101101 = EDGE_CURVE('',#101057,#101094,#101102,.T.); +#101102 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101103,#101104,#101105, + #101106),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#101103 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.25)); +#101104 = CARTESIAN_POINT('',(-0.629898904172,1.404043193849,3.25)); +#101105 = CARTESIAN_POINT('',(-0.609779588491,1.409813850284,3.25)); +#101106 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.25)); +#101107 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101108,#101109) + ,(#101110,#101111) + ,(#101112,#101113) + ,(#101114,#101115 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101108 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.251)); +#101109 = CARTESIAN_POINT('',(-0.653761348351,1.404043193849,3.25)); +#101110 = CARTESIAN_POINT('',(-0.629898904172,1.404043193849,3.251)); +#101111 = CARTESIAN_POINT('',(-0.629898904172,1.404043193849,3.25)); +#101112 = CARTESIAN_POINT('',(-0.609779588491,1.409813850284,3.251)); +#101113 = CARTESIAN_POINT('',(-0.609779588491,1.409813850284,3.25)); +#101114 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101115 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.25)); +#101116 = ADVANCED_FACE('',(#101117),#101144,.F.); +#101117 = FACE_BOUND('',#101118,.F.); +#101118 = EDGE_LOOP('',(#101119,#101120,#101129,#101137)); +#101119 = ORIENTED_EDGE('',*,*,#101093,.F.); +#101120 = ORIENTED_EDGE('',*,*,#101121,.T.); +#101121 = EDGE_CURVE('',#101085,#101122,#101124,.T.); +#101122 = VERTEX_POINT('',#101123); +#101123 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101124 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101125,#101126,#101127, + #101128),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#101125 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101126 = CARTESIAN_POINT('',(-0.577105195971,1.433052439715,3.251)); +#101127 = CARTESIAN_POINT('',(-0.56891710238,1.448492844773,3.251)); +#101128 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101129 = ORIENTED_EDGE('',*,*,#101130,.T.); +#101130 = EDGE_CURVE('',#101122,#101131,#101133,.T.); +#101131 = VERTEX_POINT('',#101132); +#101132 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.25)); +#101133 = LINE('',#101134,#101135); +#101134 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101135 = VECTOR('',#101136,1.); +#101136 = DIRECTION('',(-0.,-0.,-1.)); +#101137 = ORIENTED_EDGE('',*,*,#101138,.F.); +#101138 = EDGE_CURVE('',#101094,#101131,#101139,.T.); +#101139 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101140,#101141,#101142, + #101143),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#101140 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.25)); +#101141 = CARTESIAN_POINT('',(-0.577105195971,1.433052439715,3.25)); +#101142 = CARTESIAN_POINT('',(-0.56891710238,1.448492844773,3.25)); +#101143 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.25)); +#101144 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101145,#101146) + ,(#101147,#101148) + ,(#101149,#101150) + ,(#101151,#101152 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101145 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.251)); +#101146 = CARTESIAN_POINT('',(-0.593403401309,1.421355163157,3.25)); +#101147 = CARTESIAN_POINT('',(-0.577105195971,1.433052439715,3.251)); +#101148 = CARTESIAN_POINT('',(-0.577105195971,1.433052439715,3.25)); +#101149 = CARTESIAN_POINT('',(-0.56891710238,1.448492844773,3.251)); +#101150 = CARTESIAN_POINT('',(-0.56891710238,1.448492844773,3.25)); +#101151 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101152 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.25)); +#101153 = ADVANCED_FACE('',(#101154),#101181,.F.); +#101154 = FACE_BOUND('',#101155,.F.); +#101155 = EDGE_LOOP('',(#101156,#101157,#101166,#101174)); +#101156 = ORIENTED_EDGE('',*,*,#101130,.F.); +#101157 = ORIENTED_EDGE('',*,*,#101158,.T.); +#101158 = EDGE_CURVE('',#101122,#101159,#101161,.T.); +#101159 = VERTEX_POINT('',#101160); +#101160 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101161 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101162,#101163,#101164, + #101165),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#101162 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101163 = CARTESIAN_POINT('',(-0.56891710238,1.481245219137,3.251)); +#101164 = CARTESIAN_POINT('',(-0.572504267191,1.492786532008,3.251)); +#101165 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101166 = ORIENTED_EDGE('',*,*,#101167,.T.); +#101167 = EDGE_CURVE('',#101159,#101168,#101170,.T.); +#101168 = VERTEX_POINT('',#101169); +#101169 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.25)); +#101170 = LINE('',#101171,#101172); +#101171 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101172 = VECTOR('',#101173,1.); +#101173 = DIRECTION('',(-0.,-0.,-1.)); +#101174 = ORIENTED_EDGE('',*,*,#101175,.F.); +#101175 = EDGE_CURVE('',#101131,#101168,#101176,.T.); +#101176 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101177,#101178,#101179, + #101180),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#101177 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.25)); +#101178 = CARTESIAN_POINT('',(-0.56891710238,1.481245219137,3.25)); +#101179 = CARTESIAN_POINT('',(-0.572504267191,1.492786532008,3.25)); +#101180 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.25)); +#101181 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101182,#101183) + ,(#101184,#101185) + ,(#101186,#101187) + ,(#101188,#101189 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101182 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.251)); +#101183 = CARTESIAN_POINT('',(-0.56891710238,1.467832342015,3.25)); +#101184 = CARTESIAN_POINT('',(-0.56891710238,1.481245219137,3.251)); +#101185 = CARTESIAN_POINT('',(-0.56891710238,1.481245219137,3.25)); +#101186 = CARTESIAN_POINT('',(-0.572504267191,1.492786532008,3.251)); +#101187 = CARTESIAN_POINT('',(-0.572504267191,1.492786532008,3.25)); +#101188 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101189 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.25)); +#101190 = ADVANCED_FACE('',(#101191),#101218,.F.); +#101191 = FACE_BOUND('',#101192,.F.); +#101192 = EDGE_LOOP('',(#101193,#101194,#101203,#101211)); +#101193 = ORIENTED_EDGE('',*,*,#101167,.F.); +#101194 = ORIENTED_EDGE('',*,*,#101195,.T.); +#101195 = EDGE_CURVE('',#101159,#101196,#101198,.T.); +#101196 = VERTEX_POINT('',#101197); +#101197 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101198 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101199,#101200,#101201, + #101202),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#101199 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101200 = CARTESIAN_POINT('',(-0.58693090828,1.511814101875,3.251)); +#101201 = CARTESIAN_POINT('',(-0.602683240712,1.521483850499,3.251)); +#101202 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101203 = ORIENTED_EDGE('',*,*,#101204,.T.); +#101204 = EDGE_CURVE('',#101196,#101205,#101207,.T.); +#101205 = VERTEX_POINT('',#101206); +#101206 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.25)); +#101207 = LINE('',#101208,#101209); +#101208 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101209 = VECTOR('',#101210,1.); +#101210 = DIRECTION('',(-0.,-0.,-1.)); +#101211 = ORIENTED_EDGE('',*,*,#101212,.F.); +#101212 = EDGE_CURVE('',#101168,#101205,#101213,.T.); +#101213 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101214,#101215,#101216, + #101217),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#101214 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.25)); +#101215 = CARTESIAN_POINT('',(-0.58693090828,1.511814101875,3.25)); +#101216 = CARTESIAN_POINT('',(-0.602683240712,1.521483850499,3.25)); +#101217 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.25)); +#101218 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101219,#101220) + ,(#101221,#101222) + ,(#101223,#101224) + ,(#101225,#101226 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101219 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.251)); +#101220 = CARTESIAN_POINT('',(-0.579756578657,1.502300316941,3.25)); +#101221 = CARTESIAN_POINT('',(-0.58693090828,1.511814101875,3.251)); +#101222 = CARTESIAN_POINT('',(-0.58693090828,1.511814101875,3.25)); +#101223 = CARTESIAN_POINT('',(-0.602683240712,1.521483850499,3.251)); +#101224 = CARTESIAN_POINT('',(-0.602683240712,1.521483850499,3.25)); +#101225 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101226 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.25)); +#101227 = ADVANCED_FACE('',(#101228),#101255,.F.); +#101228 = FACE_BOUND('',#101229,.F.); +#101229 = EDGE_LOOP('',(#101230,#101231,#101240,#101248)); +#101230 = ORIENTED_EDGE('',*,*,#101204,.F.); +#101231 = ORIENTED_EDGE('',*,*,#101232,.T.); +#101232 = EDGE_CURVE('',#101196,#101233,#101235,.T.); +#101233 = VERTEX_POINT('',#101234); +#101234 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101235 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101236,#101237,#101238, + #101239),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#101236 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101237 = CARTESIAN_POINT('',(-0.646898946104,1.538639856117,3.251)); +#101238 = CARTESIAN_POINT('',(-0.66023384138,1.545190330991,3.251)); +#101239 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101240 = ORIENTED_EDGE('',*,*,#101241,.T.); +#101241 = EDGE_CURVE('',#101233,#101242,#101244,.T.); +#101242 = VERTEX_POINT('',#101243); +#101243 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.25)); +#101244 = LINE('',#101245,#101246); +#101245 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101246 = VECTOR('',#101247,1.); +#101247 = DIRECTION('',(-0.,-0.,-1.)); +#101248 = ORIENTED_EDGE('',*,*,#101249,.F.); +#101249 = EDGE_CURVE('',#101205,#101242,#101250,.T.); +#101250 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101251,#101252,#101253, + #101254),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#101251 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.25)); +#101252 = CARTESIAN_POINT('',(-0.646898946104,1.538639856117,3.25)); +#101253 = CARTESIAN_POINT('',(-0.66023384138,1.545190330991,3.25)); +#101254 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.25)); +#101255 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101256,#101257) + ,(#101258,#101259) + ,(#101260,#101261) + ,(#101262,#101263 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101256 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.251)); +#101257 = CARTESIAN_POINT('',(-0.626779630423,1.53115359912,3.25)); +#101258 = CARTESIAN_POINT('',(-0.646898946104,1.538639856117,3.251)); +#101259 = CARTESIAN_POINT('',(-0.646898946104,1.538639856117,3.25)); +#101260 = CARTESIAN_POINT('',(-0.66023384138,1.545190330991,3.251)); +#101261 = CARTESIAN_POINT('',(-0.66023384138,1.545190330991,3.25)); +#101262 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101263 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.25)); +#101264 = ADVANCED_FACE('',(#101265),#101292,.F.); +#101265 = FACE_BOUND('',#101266,.F.); +#101266 = EDGE_LOOP('',(#101267,#101268,#101277,#101285)); +#101267 = ORIENTED_EDGE('',*,*,#101241,.F.); +#101268 = ORIENTED_EDGE('',*,*,#101269,.T.); +#101269 = EDGE_CURVE('',#101233,#101270,#101272,.T.); +#101270 = VERTEX_POINT('',#101271); +#101271 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101272 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101273,#101274,#101275, + #101276),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#101273 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101274 = CARTESIAN_POINT('',(-0.673334791126,1.556107789112,3.251)); +#101275 = CARTESIAN_POINT('',(-0.676610028562,1.562970191358,3.251)); +#101276 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101277 = ORIENTED_EDGE('',*,*,#101278,.T.); +#101278 = EDGE_CURVE('',#101270,#101279,#101281,.T.); +#101279 = VERTEX_POINT('',#101280); +#101280 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.25)); +#101281 = LINE('',#101282,#101283); +#101282 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101283 = VECTOR('',#101284,1.); +#101284 = DIRECTION('',(-0.,-0.,-1.)); +#101285 = ORIENTED_EDGE('',*,*,#101286,.F.); +#101286 = EDGE_CURVE('',#101242,#101279,#101287,.T.); +#101287 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101288,#101289,#101290, + #101291),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#101288 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.25)); +#101289 = CARTESIAN_POINT('',(-0.673334791126,1.556107789112,3.25)); +#101290 = CARTESIAN_POINT('',(-0.676610028562,1.562970191358,3.25)); +#101291 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.25)); +#101292 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101293,#101294) + ,(#101295,#101296) + ,(#101297,#101298) + ,(#101299,#101300 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101293 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.251)); +#101294 = CARTESIAN_POINT('',(-0.666784316253,1.550649060051,3.25)); +#101295 = CARTESIAN_POINT('',(-0.673334791126,1.556107789112,3.251)); +#101296 = CARTESIAN_POINT('',(-0.673334791126,1.556107789112,3.25)); +#101297 = CARTESIAN_POINT('',(-0.676610028562,1.562970191358,3.251)); +#101298 = CARTESIAN_POINT('',(-0.676610028562,1.562970191358,3.25)); +#101299 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101300 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.25)); +#101301 = ADVANCED_FACE('',(#101302),#101320,.F.); +#101302 = FACE_BOUND('',#101303,.F.); +#101303 = EDGE_LOOP('',(#101304,#101305,#101312,#101313)); +#101304 = ORIENTED_EDGE('',*,*,#101278,.F.); +#101305 = ORIENTED_EDGE('',*,*,#101306,.T.); +#101306 = EDGE_CURVE('',#101270,#100569,#101307,.T.); +#101307 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101308,#101309,#101310, + #101311),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#101308 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101309 = CARTESIAN_POINT('',(-0.676610028562,1.5910436551,3.251)); +#101310 = CARTESIAN_POINT('',(-0.661559532724,1.600869367408,3.251)); +#101311 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#101312 = ORIENTED_EDGE('',*,*,#100568,.T.); +#101313 = ORIENTED_EDGE('',*,*,#101314,.F.); +#101314 = EDGE_CURVE('',#101279,#100571,#101315,.T.); +#101315 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101316,#101317,#101318, + #101319),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#101316 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.25)); +#101317 = CARTESIAN_POINT('',(-0.676610028562,1.5910436551,3.25)); +#101318 = CARTESIAN_POINT('',(-0.661559532724,1.600869367408,3.25)); +#101319 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.25)); +#101320 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101321,#101322) + ,(#101323,#101324) + ,(#101325,#101326) + ,(#101327,#101328 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101321 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.251)); +#101322 = CARTESIAN_POINT('',(-0.676610028562,1.571392230481,3.25)); +#101323 = CARTESIAN_POINT('',(-0.676610028562,1.5910436551,3.251)); +#101324 = CARTESIAN_POINT('',(-0.676610028562,1.5910436551,3.25)); +#101325 = CARTESIAN_POINT('',(-0.661559532724,1.600869367408,3.251)); +#101326 = CARTESIAN_POINT('',(-0.661559532724,1.600869367408,3.25)); +#101327 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.251)); +#101328 = CARTESIAN_POINT('',(-0.63153652289,1.600869367408,3.25)); +#101329 = ADVANCED_FACE('',(#101330),#101353,.F.); +#101330 = FACE_BOUND('',#101331,.T.); +#101331 = EDGE_LOOP('',(#101332,#101333,#101334,#101335,#101336,#101337, + #101338,#101339,#101340,#101341,#101342,#101343,#101344,#101345, + #101346,#101347,#101348,#101349,#101350,#101351,#101352)); +#101332 = ORIENTED_EDGE('',*,*,#100578,.T.); +#101333 = ORIENTED_EDGE('',*,*,#100630,.T.); +#101334 = ORIENTED_EDGE('',*,*,#100646,.T.); +#101335 = ORIENTED_EDGE('',*,*,#100683,.T.); +#101336 = ORIENTED_EDGE('',*,*,#100720,.T.); +#101337 = ORIENTED_EDGE('',*,*,#100757,.T.); +#101338 = ORIENTED_EDGE('',*,*,#100794,.T.); +#101339 = ORIENTED_EDGE('',*,*,#100831,.T.); +#101340 = ORIENTED_EDGE('',*,*,#100868,.T.); +#101341 = ORIENTED_EDGE('',*,*,#100905,.T.); +#101342 = ORIENTED_EDGE('',*,*,#100942,.T.); +#101343 = ORIENTED_EDGE('',*,*,#100979,.T.); +#101344 = ORIENTED_EDGE('',*,*,#101031,.T.); +#101345 = ORIENTED_EDGE('',*,*,#101047,.T.); +#101346 = ORIENTED_EDGE('',*,*,#101084,.T.); +#101347 = ORIENTED_EDGE('',*,*,#101121,.T.); +#101348 = ORIENTED_EDGE('',*,*,#101158,.T.); +#101349 = ORIENTED_EDGE('',*,*,#101195,.T.); +#101350 = ORIENTED_EDGE('',*,*,#101232,.T.); +#101351 = ORIENTED_EDGE('',*,*,#101269,.T.); +#101352 = ORIENTED_EDGE('',*,*,#101306,.T.); +#101353 = PLANE('',#101354); +#101354 = AXIS2_PLACEMENT_3D('',#101355,#101356,#101357); +#101355 = CARTESIAN_POINT('',(-0.598998598596,1.595605592957,3.251)); +#101356 = DIRECTION('',(0.,0.,-1.)); +#101357 = DIRECTION('',(-1.,0.,-0.)); +#101358 = ADVANCED_FACE('',(#101359),#101382,.T.); +#101359 = FACE_BOUND('',#101360,.T.); +#101360 = EDGE_LOOP('',(#101361,#101362,#101363,#101364,#101365,#101366, + #101367,#101368,#101369,#101370,#101371,#101372,#101373,#101374, + #101375,#101376,#101377,#101378,#101379,#101380,#101381)); +#101361 = ORIENTED_EDGE('',*,*,#100595,.F.); +#101362 = ORIENTED_EDGE('',*,*,#101314,.F.); +#101363 = ORIENTED_EDGE('',*,*,#101286,.F.); +#101364 = ORIENTED_EDGE('',*,*,#101249,.F.); +#101365 = ORIENTED_EDGE('',*,*,#101212,.F.); +#101366 = ORIENTED_EDGE('',*,*,#101175,.F.); +#101367 = ORIENTED_EDGE('',*,*,#101138,.F.); +#101368 = ORIENTED_EDGE('',*,*,#101101,.F.); +#101369 = ORIENTED_EDGE('',*,*,#101064,.F.); +#101370 = ORIENTED_EDGE('',*,*,#101015,.F.); +#101371 = ORIENTED_EDGE('',*,*,#100996,.F.); +#101372 = ORIENTED_EDGE('',*,*,#100959,.F.); +#101373 = ORIENTED_EDGE('',*,*,#100922,.F.); +#101374 = ORIENTED_EDGE('',*,*,#100885,.F.); +#101375 = ORIENTED_EDGE('',*,*,#100848,.F.); +#101376 = ORIENTED_EDGE('',*,*,#100811,.F.); +#101377 = ORIENTED_EDGE('',*,*,#100774,.F.); +#101378 = ORIENTED_EDGE('',*,*,#100737,.F.); +#101379 = ORIENTED_EDGE('',*,*,#100700,.F.); +#101380 = ORIENTED_EDGE('',*,*,#100663,.F.); +#101381 = ORIENTED_EDGE('',*,*,#100614,.F.); +#101382 = PLANE('',#101383); +#101383 = AXIS2_PLACEMENT_3D('',#101384,#101385,#101386); +#101384 = CARTESIAN_POINT('',(-0.598998598596,1.595605592957,3.25)); +#101385 = DIRECTION('',(0.,0.,-1.)); +#101386 = DIRECTION('',(-1.,0.,-0.)); +#101387 = MANIFOLD_SOLID_BREP('',#101388); +#101388 = CLOSED_SHELL('',(#101389,#101429,#101460,#101497,#101528, + #101559,#101590,#101621,#101652,#101683,#101720,#101757,#101788, + #101825,#101862,#101884,#101907)); +#101389 = ADVANCED_FACE('',(#101390),#101424,.F.); +#101390 = FACE_BOUND('',#101391,.T.); +#101391 = EDGE_LOOP('',(#101392,#101402,#101410,#101418)); +#101392 = ORIENTED_EDGE('',*,*,#101393,.T.); +#101393 = EDGE_CURVE('',#101394,#101396,#101398,.T.); +#101394 = VERTEX_POINT('',#101395); +#101395 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.25)); +#101396 = VERTEX_POINT('',#101397); +#101397 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.25)); +#101398 = LINE('',#101399,#101400); +#101399 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.25)); +#101400 = VECTOR('',#101401,1.); +#101401 = DIRECTION('',(1.,5.473726044974E-15,-0.)); +#101402 = ORIENTED_EDGE('',*,*,#101403,.F.); +#101403 = EDGE_CURVE('',#101404,#101396,#101406,.T.); +#101404 = VERTEX_POINT('',#101405); +#101405 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.251)); +#101406 = LINE('',#101407,#101408); +#101407 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.251)); +#101408 = VECTOR('',#101409,1.); +#101409 = DIRECTION('',(-0.,-0.,-1.)); +#101410 = ORIENTED_EDGE('',*,*,#101411,.F.); +#101411 = EDGE_CURVE('',#101412,#101404,#101414,.T.); +#101412 = VERTEX_POINT('',#101413); +#101413 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.251)); +#101414 = LINE('',#101415,#101416); +#101415 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.251)); +#101416 = VECTOR('',#101417,1.); +#101417 = DIRECTION('',(1.,5.473726044974E-15,-0.)); +#101418 = ORIENTED_EDGE('',*,*,#101419,.T.); +#101419 = EDGE_CURVE('',#101412,#101394,#101420,.T.); +#101420 = LINE('',#101421,#101422); +#101421 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.251)); +#101422 = VECTOR('',#101423,1.); +#101423 = DIRECTION('',(-0.,-0.,-1.)); +#101424 = PLANE('',#101425); +#101425 = AXIS2_PLACEMENT_3D('',#101426,#101427,#101428); +#101426 = CARTESIAN_POINT('',(-0.905252794362,1.409034031848,3.251)); +#101427 = DIRECTION('',(-5.473726044974E-15,1.,0.)); +#101428 = DIRECTION('',(-1.,-5.473726044974E-15,0.)); +#101429 = ADVANCED_FACE('',(#101430),#101455,.F.); +#101430 = FACE_BOUND('',#101431,.T.); +#101431 = EDGE_LOOP('',(#101432,#101440,#101448,#101454)); +#101432 = ORIENTED_EDGE('',*,*,#101433,.T.); +#101433 = EDGE_CURVE('',#101396,#101434,#101436,.T.); +#101434 = VERTEX_POINT('',#101435); +#101435 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.25)); +#101436 = LINE('',#101437,#101438); +#101437 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.25)); +#101438 = VECTOR('',#101439,1.); +#101439 = DIRECTION('',(0.340917796219,0.9400931104,-0.)); +#101440 = ORIENTED_EDGE('',*,*,#101441,.F.); +#101441 = EDGE_CURVE('',#101442,#101434,#101444,.T.); +#101442 = VERTEX_POINT('',#101443); +#101443 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101444 = LINE('',#101445,#101446); +#101445 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101446 = VECTOR('',#101447,1.); +#101447 = DIRECTION('',(-0.,-0.,-1.)); +#101448 = ORIENTED_EDGE('',*,*,#101449,.F.); +#101449 = EDGE_CURVE('',#101404,#101442,#101450,.T.); +#101450 = LINE('',#101451,#101452); +#101451 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101452 = VECTOR('',#101453,1.); +#101453 = DIRECTION('',(0.340917796219,0.9400931104,-0.)); +#101454 = ORIENTED_EDGE('',*,*,#101403,.T.); +#101455 = PLANE('',#101456); +#101456 = AXIS2_PLACEMENT_3D('',#101457,#101458,#101459); +#101457 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101458 = DIRECTION('',(-0.9400931104,0.340917796219,0.)); +#101459 = DIRECTION('',(-0.340917796219,-0.9400931104,0.)); +#101460 = ADVANCED_FACE('',(#101461),#101488,.F.); +#101461 = FACE_BOUND('',#101462,.F.); +#101462 = EDGE_LOOP('',(#101463,#101464,#101473,#101481)); +#101463 = ORIENTED_EDGE('',*,*,#101441,.F.); +#101464 = ORIENTED_EDGE('',*,*,#101465,.T.); +#101465 = EDGE_CURVE('',#101442,#101466,#101468,.T.); +#101466 = VERTEX_POINT('',#101467); +#101467 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.251)); +#101468 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101469,#101470,#101471, + #101472),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#101469 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101470 = CARTESIAN_POINT('',(-0.843413192288,1.580750051728,3.251)); +#101471 = CARTESIAN_POINT('',(-0.841853555412,1.58667667185,3.251)); +#101472 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.251)); +#101473 = ORIENTED_EDGE('',*,*,#101474,.T.); +#101474 = EDGE_CURVE('',#101466,#101475,#101477,.T.); +#101475 = VERTEX_POINT('',#101476); +#101476 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.25)); +#101477 = LINE('',#101478,#101479); +#101478 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.251)); +#101479 = VECTOR('',#101480,1.); +#101480 = DIRECTION('',(-0.,-0.,-1.)); +#101481 = ORIENTED_EDGE('',*,*,#101482,.F.); +#101482 = EDGE_CURVE('',#101434,#101475,#101483,.T.); +#101483 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101484,#101485,#101486, + #101487),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#101484 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.25)); +#101485 = CARTESIAN_POINT('',(-0.843413192288,1.580750051728,3.25)); +#101486 = CARTESIAN_POINT('',(-0.841853555412,1.58667667185,3.25)); +#101487 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.25)); +#101488 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101489,#101490) + ,(#101491,#101492) + ,(#101493,#101494) + ,(#101495,#101496 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101489 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.251)); +#101490 = CARTESIAN_POINT('',(-0.8457526476,1.573107831043,3.25)); +#101491 = CARTESIAN_POINT('',(-0.843413192288,1.580750051728,3.251)); +#101492 = CARTESIAN_POINT('',(-0.843413192288,1.580750051728,3.25)); +#101493 = CARTESIAN_POINT('',(-0.841853555412,1.58667667185,3.251)); +#101494 = CARTESIAN_POINT('',(-0.841853555412,1.58667667185,3.25)); +#101495 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.251)); +#101496 = CARTESIAN_POINT('',(-0.841073736975,1.590731727725,3.25)); +#101497 = ADVANCED_FACE('',(#101498),#101523,.F.); +#101498 = FACE_BOUND('',#101499,.T.); +#101499 = EDGE_LOOP('',(#101500,#101508,#101516,#101522)); +#101500 = ORIENTED_EDGE('',*,*,#101501,.T.); +#101501 = EDGE_CURVE('',#101475,#101502,#101504,.T.); +#101502 = VERTEX_POINT('',#101503); +#101503 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.25)); +#101504 = LINE('',#101505,#101506); +#101505 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.25)); +#101506 = VECTOR('',#101507,1.); +#101507 = DIRECTION('',(1.,-0.,-0.)); +#101508 = ORIENTED_EDGE('',*,*,#101509,.F.); +#101509 = EDGE_CURVE('',#101510,#101502,#101512,.T.); +#101510 = VERTEX_POINT('',#101511); +#101511 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.251)); +#101512 = LINE('',#101513,#101514); +#101513 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.251)); +#101514 = VECTOR('',#101515,1.); +#101515 = DIRECTION('',(-0.,-0.,-1.)); +#101516 = ORIENTED_EDGE('',*,*,#101517,.F.); +#101517 = EDGE_CURVE('',#101466,#101510,#101518,.T.); +#101518 = LINE('',#101519,#101520); +#101519 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.251)); +#101520 = VECTOR('',#101521,1.); +#101521 = DIRECTION('',(1.,-0.,-0.)); +#101522 = ORIENTED_EDGE('',*,*,#101474,.T.); +#101523 = PLANE('',#101524); +#101524 = AXIS2_PLACEMENT_3D('',#101525,#101526,#101527); +#101525 = CARTESIAN_POINT('',(-0.840059973008,1.590731727725,3.251)); +#101526 = DIRECTION('',(0.,1.,-0.)); +#101527 = DIRECTION('',(0.,0.,1.)); +#101528 = ADVANCED_FACE('',(#101529),#101554,.F.); +#101529 = FACE_BOUND('',#101530,.T.); +#101530 = EDGE_LOOP('',(#101531,#101539,#101547,#101553)); +#101531 = ORIENTED_EDGE('',*,*,#101532,.T.); +#101532 = EDGE_CURVE('',#101502,#101533,#101535,.T.); +#101533 = VERTEX_POINT('',#101534); +#101534 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.25)); +#101535 = LINE('',#101536,#101537); +#101536 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.25)); +#101537 = VECTOR('',#101538,1.); +#101538 = DIRECTION('',(0.252421897188,-0.967617272386,-0.)); +#101539 = ORIENTED_EDGE('',*,*,#101540,.F.); +#101540 = EDGE_CURVE('',#101541,#101533,#101543,.T.); +#101541 = VERTEX_POINT('',#101542); +#101542 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.251)); +#101543 = LINE('',#101544,#101545); +#101544 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.251)); +#101545 = VECTOR('',#101546,1.); +#101546 = DIRECTION('',(-0.,-0.,-1.)); +#101547 = ORIENTED_EDGE('',*,*,#101548,.F.); +#101548 = EDGE_CURVE('',#101510,#101541,#101549,.T.); +#101549 = LINE('',#101550,#101551); +#101550 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.251)); +#101551 = VECTOR('',#101552,1.); +#101552 = DIRECTION('',(0.252421897188,-0.967617272386,-0.)); +#101553 = ORIENTED_EDGE('',*,*,#101509,.T.); +#101554 = PLANE('',#101555); +#101555 = AXIS2_PLACEMENT_3D('',#101556,#101557,#101558); +#101556 = CARTESIAN_POINT('',(-0.835381062384,1.572795903668,3.251)); +#101557 = DIRECTION('',(0.967617272386,0.252421897188,-0.)); +#101558 = DIRECTION('',(-0.252421897188,0.967617272386,0.)); +#101559 = ADVANCED_FACE('',(#101560),#101585,.F.); +#101560 = FACE_BOUND('',#101561,.T.); +#101561 = EDGE_LOOP('',(#101562,#101570,#101578,#101584)); +#101562 = ORIENTED_EDGE('',*,*,#101563,.T.); +#101563 = EDGE_CURVE('',#101533,#101564,#101566,.T.); +#101564 = VERTEX_POINT('',#101565); +#101565 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.25)); +#101566 = LINE('',#101567,#101568); +#101567 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.25)); +#101568 = VECTOR('',#101569,1.); +#101569 = DIRECTION('',(0.328346164813,-0.944557460429,-0.)); +#101570 = ORIENTED_EDGE('',*,*,#101571,.F.); +#101571 = EDGE_CURVE('',#101572,#101564,#101574,.T.); +#101572 = VERTEX_POINT('',#101573); +#101573 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.251)); +#101574 = LINE('',#101575,#101576); +#101575 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.251)); +#101576 = VECTOR('',#101577,1.); +#101577 = DIRECTION('',(-0.,-0.,-1.)); +#101578 = ORIENTED_EDGE('',*,*,#101579,.F.); +#101579 = EDGE_CURVE('',#101541,#101572,#101580,.T.); +#101580 = LINE('',#101581,#101582); +#101581 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.251)); +#101582 = VECTOR('',#101583,1.); +#101583 = DIRECTION('',(0.328346164813,-0.944557460429,-0.)); +#101584 = ORIENTED_EDGE('',*,*,#101540,.T.); +#101585 = PLANE('',#101586); +#101586 = AXIS2_PLACEMENT_3D('',#101587,#101588,#101589); +#101587 = CARTESIAN_POINT('',(-0.778454316466,1.409034031848,3.251)); +#101588 = DIRECTION('',(0.944557460429,0.328346164813,-0.)); +#101589 = DIRECTION('',(-0.328346164813,0.944557460429,0.)); +#101590 = ADVANCED_FACE('',(#101591),#101616,.F.); +#101591 = FACE_BOUND('',#101592,.T.); +#101592 = EDGE_LOOP('',(#101593,#101601,#101609,#101615)); +#101593 = ORIENTED_EDGE('',*,*,#101594,.T.); +#101594 = EDGE_CURVE('',#101564,#101595,#101597,.T.); +#101595 = VERTEX_POINT('',#101596); +#101596 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.25)); +#101597 = LINE('',#101598,#101599); +#101598 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.25)); +#101599 = VECTOR('',#101600,1.); +#101600 = DIRECTION('',(1.,1.014836799537E-14,-0.)); +#101601 = ORIENTED_EDGE('',*,*,#101602,.F.); +#101602 = EDGE_CURVE('',#101603,#101595,#101605,.T.); +#101603 = VERTEX_POINT('',#101604); +#101604 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.251)); +#101605 = LINE('',#101606,#101607); +#101606 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.251)); +#101607 = VECTOR('',#101608,1.); +#101608 = DIRECTION('',(-0.,-0.,-1.)); +#101609 = ORIENTED_EDGE('',*,*,#101610,.F.); +#101610 = EDGE_CURVE('',#101572,#101603,#101611,.T.); +#101611 = LINE('',#101612,#101613); +#101612 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.251)); +#101613 = VECTOR('',#101614,1.); +#101614 = DIRECTION('',(1.,1.014836799537E-14,-0.)); +#101615 = ORIENTED_EDGE('',*,*,#101571,.T.); +#101616 = PLANE('',#101617); +#101617 = AXIS2_PLACEMENT_3D('',#101618,#101619,#101620); +#101618 = CARTESIAN_POINT('',(-0.735720266105,1.409034031848,3.251)); +#101619 = DIRECTION('',(-1.014836799537E-14,1.,0.)); +#101620 = DIRECTION('',(-1.,-1.014836799537E-14,0.)); +#101621 = ADVANCED_FACE('',(#101622),#101647,.F.); +#101622 = FACE_BOUND('',#101623,.T.); +#101623 = EDGE_LOOP('',(#101624,#101632,#101640,#101646)); +#101624 = ORIENTED_EDGE('',*,*,#101625,.T.); +#101625 = EDGE_CURVE('',#101595,#101626,#101628,.T.); +#101626 = VERTEX_POINT('',#101627); +#101627 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.25)); +#101628 = LINE('',#101629,#101630); +#101629 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.25)); +#101630 = VECTOR('',#101631,1.); +#101631 = DIRECTION('',(-0.365858921669,0.930670322636,-0.)); +#101632 = ORIENTED_EDGE('',*,*,#101633,.F.); +#101633 = EDGE_CURVE('',#101634,#101626,#101636,.T.); +#101634 = VERTEX_POINT('',#101635); +#101635 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.251)); +#101636 = LINE('',#101637,#101638); +#101637 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.251)); +#101638 = VECTOR('',#101639,1.); +#101639 = DIRECTION('',(-0.,-0.,-1.)); +#101640 = ORIENTED_EDGE('',*,*,#101641,.F.); +#101641 = EDGE_CURVE('',#101603,#101634,#101642,.T.); +#101642 = LINE('',#101643,#101644); +#101643 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.251)); +#101644 = VECTOR('',#101645,1.); +#101645 = DIRECTION('',(-0.365858921669,0.930670322636,-0.)); +#101646 = ORIENTED_EDGE('',*,*,#101602,.T.); +#101647 = PLANE('',#101648); +#101648 = AXIS2_PLACEMENT_3D('',#101649,#101650,#101651); +#101649 = CARTESIAN_POINT('',(-0.821188366827,1.62644741215,3.251)); +#101650 = DIRECTION('',(-0.930670322636,-0.365858921669,0.)); +#101651 = DIRECTION('',(0.365858921669,-0.930670322636,0.)); +#101652 = ADVANCED_FACE('',(#101653),#101678,.F.); +#101653 = FACE_BOUND('',#101654,.T.); +#101654 = EDGE_LOOP('',(#101655,#101663,#101671,#101677)); +#101655 = ORIENTED_EDGE('',*,*,#101656,.T.); +#101656 = EDGE_CURVE('',#101626,#101657,#101659,.T.); +#101657 = VERTEX_POINT('',#101658); +#101658 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.25)); +#101659 = LINE('',#101660,#101661); +#101660 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.25)); +#101661 = VECTOR('',#101662,1.); +#101662 = DIRECTION('',(0.389758265065,0.920917203017,-0.)); +#101663 = ORIENTED_EDGE('',*,*,#101664,.F.); +#101664 = EDGE_CURVE('',#101665,#101657,#101667,.T.); +#101665 = VERTEX_POINT('',#101666); +#101666 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101667 = LINE('',#101668,#101669); +#101668 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101669 = VECTOR('',#101670,1.); +#101670 = DIRECTION('',(-0.,-0.,-1.)); +#101671 = ORIENTED_EDGE('',*,*,#101672,.F.); +#101672 = EDGE_CURVE('',#101634,#101665,#101673,.T.); +#101673 = LINE('',#101674,#101675); +#101674 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101675 = VECTOR('',#101676,1.); +#101676 = DIRECTION('',(0.389758265065,0.920917203017,-0.)); +#101677 = ORIENTED_EDGE('',*,*,#101633,.T.); +#101678 = PLANE('',#101679); +#101679 = AXIS2_PLACEMENT_3D('',#101680,#101681,#101682); +#101680 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101681 = DIRECTION('',(-0.920917203017,0.389758265065,0.)); +#101682 = DIRECTION('',(-0.389758265065,-0.920917203017,0.)); +#101683 = ADVANCED_FACE('',(#101684),#101711,.F.); +#101684 = FACE_BOUND('',#101685,.F.); +#101685 = EDGE_LOOP('',(#101686,#101687,#101696,#101704)); +#101686 = ORIENTED_EDGE('',*,*,#101664,.F.); +#101687 = ORIENTED_EDGE('',*,*,#101688,.T.); +#101688 = EDGE_CURVE('',#101665,#101689,#101691,.T.); +#101689 = VERTEX_POINT('',#101690); +#101690 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101691 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101692,#101693,#101694, + #101695),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#101692 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101693 = CARTESIAN_POINT('',(-0.795766285772,1.686649395504,3.251)); +#101694 = CARTESIAN_POINT('',(-0.782743317871,1.696787035189,3.251)); +#101695 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101696 = ORIENTED_EDGE('',*,*,#101697,.T.); +#101697 = EDGE_CURVE('',#101689,#101698,#101700,.T.); +#101698 = VERTEX_POINT('',#101699); +#101699 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.25)); +#101700 = LINE('',#101701,#101702); +#101701 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101702 = VECTOR('',#101703,1.); +#101703 = DIRECTION('',(-0.,-0.,-1.)); +#101704 = ORIENTED_EDGE('',*,*,#101705,.F.); +#101705 = EDGE_CURVE('',#101657,#101698,#101706,.T.); +#101706 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101707,#101708,#101709, + #101710),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#101707 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.25)); +#101708 = CARTESIAN_POINT('',(-0.795766285772,1.686649395504,3.25)); +#101709 = CARTESIAN_POINT('',(-0.782743317871,1.696787035189,3.25)); +#101710 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.25)); +#101711 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101712,#101713) + ,(#101714,#101715) + ,(#101716,#101717) + ,(#101718,#101719 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101712 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.251)); +#101713 = CARTESIAN_POINT('',(-0.804422270425,1.666062188762,3.25)); +#101714 = CARTESIAN_POINT('',(-0.795766285772,1.686649395504,3.251)); +#101715 = CARTESIAN_POINT('',(-0.795766285772,1.686649395504,3.25)); +#101716 = CARTESIAN_POINT('',(-0.782743317871,1.696787035189,3.251)); +#101717 = CARTESIAN_POINT('',(-0.782743317871,1.696787035189,3.25)); +#101718 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101719 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.25)); +#101720 = ADVANCED_FACE('',(#101721),#101748,.F.); +#101721 = FACE_BOUND('',#101722,.F.); +#101722 = EDGE_LOOP('',(#101723,#101724,#101733,#101741)); +#101723 = ORIENTED_EDGE('',*,*,#101697,.F.); +#101724 = ORIENTED_EDGE('',*,*,#101725,.T.); +#101725 = EDGE_CURVE('',#101689,#101726,#101728,.T.); +#101726 = VERTEX_POINT('',#101727); +#101727 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.251)); +#101728 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101729,#101730,#101731, + #101732),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#101729 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101730 = CARTESIAN_POINT('',(-0.758257018941,1.696787035189,3.251)); +#101731 = CARTESIAN_POINT('',(-0.751082689319,1.695383362002,3.251)); +#101732 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.251)); +#101733 = ORIENTED_EDGE('',*,*,#101734,.T.); +#101734 = EDGE_CURVE('',#101726,#101735,#101737,.T.); +#101735 = VERTEX_POINT('',#101736); +#101736 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.25)); +#101737 = LINE('',#101738,#101739); +#101738 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.251)); +#101739 = VECTOR('',#101740,1.); +#101740 = DIRECTION('',(-0.,-0.,-1.)); +#101741 = ORIENTED_EDGE('',*,*,#101742,.F.); +#101742 = EDGE_CURVE('',#101698,#101735,#101743,.T.); +#101743 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101744,#101745,#101746, + #101747),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#101744 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.25)); +#101745 = CARTESIAN_POINT('',(-0.758257018941,1.696787035189,3.25)); +#101746 = CARTESIAN_POINT('',(-0.751082689319,1.695383362002,3.25)); +#101747 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.25)); +#101748 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101749,#101750) + ,(#101751,#101752) + ,(#101753,#101754) + ,(#101755,#101756 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101749 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.251)); +#101750 = CARTESIAN_POINT('',(-0.765275384876,1.696787035189,3.25)); +#101751 = CARTESIAN_POINT('',(-0.758257018941,1.696787035189,3.251)); +#101752 = CARTESIAN_POINT('',(-0.758257018941,1.696787035189,3.25)); +#101753 = CARTESIAN_POINT('',(-0.751082689319,1.695383362002,3.251)); +#101754 = CARTESIAN_POINT('',(-0.751082689319,1.695383362002,3.25)); +#101755 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.251)); +#101756 = CARTESIAN_POINT('',(-0.743596432321,1.69242005194,3.25)); +#101757 = ADVANCED_FACE('',(#101758),#101783,.F.); +#101758 = FACE_BOUND('',#101759,.T.); +#101759 = EDGE_LOOP('',(#101760,#101768,#101776,#101782)); +#101760 = ORIENTED_EDGE('',*,*,#101761,.T.); +#101761 = EDGE_CURVE('',#101735,#101762,#101764,.T.); +#101762 = VERTEX_POINT('',#101763); +#101763 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.25)); +#101764 = LINE('',#101765,#101766); +#101765 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.25)); +#101766 = VECTOR('',#101767,1.); +#101767 = DIRECTION('',(-1.275528821413E-14,1.,-0.)); +#101768 = ORIENTED_EDGE('',*,*,#101769,.F.); +#101769 = EDGE_CURVE('',#101770,#101762,#101772,.T.); +#101770 = VERTEX_POINT('',#101771); +#101771 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101772 = LINE('',#101773,#101774); +#101773 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101774 = VECTOR('',#101775,1.); +#101775 = DIRECTION('',(-0.,-0.,-1.)); +#101776 = ORIENTED_EDGE('',*,*,#101777,.F.); +#101777 = EDGE_CURVE('',#101726,#101770,#101778,.T.); +#101778 = LINE('',#101779,#101780); +#101779 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101780 = VECTOR('',#101781,1.); +#101781 = DIRECTION('',(-1.275528821413E-14,1.,-0.)); +#101782 = ORIENTED_EDGE('',*,*,#101734,.T.); +#101783 = PLANE('',#101784); +#101784 = AXIS2_PLACEMENT_3D('',#101785,#101786,#101787); +#101785 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101786 = DIRECTION('',(-1.,-1.275528821413E-14,0.)); +#101787 = DIRECTION('',(1.275528821413E-14,-1.,0.)); +#101788 = ADVANCED_FACE('',(#101789),#101816,.F.); +#101789 = FACE_BOUND('',#101790,.F.); +#101790 = EDGE_LOOP('',(#101791,#101792,#101801,#101809)); +#101791 = ORIENTED_EDGE('',*,*,#101769,.F.); +#101792 = ORIENTED_EDGE('',*,*,#101793,.T.); +#101793 = EDGE_CURVE('',#101770,#101794,#101796,.T.); +#101794 = VERTEX_POINT('',#101795); +#101795 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101796 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101797,#101798,#101799, + #101800),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#101797 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101798 = CARTESIAN_POINT('',(-0.750380852725,1.728447663741,3.251)); +#101799 = CARTESIAN_POINT('',(-0.75864692816,1.729539409553,3.251)); +#101800 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101801 = ORIENTED_EDGE('',*,*,#101802,.T.); +#101802 = EDGE_CURVE('',#101794,#101803,#101805,.T.); +#101803 = VERTEX_POINT('',#101804); +#101804 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.25)); +#101805 = LINE('',#101806,#101807); +#101806 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101807 = VECTOR('',#101808,1.); +#101808 = DIRECTION('',(-0.,-0.,-1.)); +#101809 = ORIENTED_EDGE('',*,*,#101810,.F.); +#101810 = EDGE_CURVE('',#101762,#101803,#101811,.T.); +#101811 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101812,#101813,#101814, + #101815),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#101812 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.25)); +#101813 = CARTESIAN_POINT('',(-0.750380852725,1.728447663741,3.25)); +#101814 = CARTESIAN_POINT('',(-0.75864692816,1.729539409553,3.25)); +#101815 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.25)); +#101816 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101817,#101818) + ,(#101819,#101820) + ,(#101821,#101822) + ,(#101823,#101824 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101817 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.251)); +#101818 = CARTESIAN_POINT('',(-0.743596432321,1.726420135804,3.25)); +#101819 = CARTESIAN_POINT('',(-0.750380852725,1.728447663741,3.251)); +#101820 = CARTESIAN_POINT('',(-0.750380852725,1.728447663741,3.25)); +#101821 = CARTESIAN_POINT('',(-0.75864692816,1.729539409553,3.251)); +#101822 = CARTESIAN_POINT('',(-0.75864692816,1.729539409553,3.25)); +#101823 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101824 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.25)); +#101825 = ADVANCED_FACE('',(#101826),#101853,.F.); +#101826 = FACE_BOUND('',#101827,.F.); +#101827 = EDGE_LOOP('',(#101828,#101829,#101838,#101846)); +#101828 = ORIENTED_EDGE('',*,*,#101802,.F.); +#101829 = ORIENTED_EDGE('',*,*,#101830,.T.); +#101830 = EDGE_CURVE('',#101794,#101831,#101833,.T.); +#101831 = VERTEX_POINT('',#101832); +#101832 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.251)); +#101833 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101834,#101835,#101836, + #101837),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#101834 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101835 = CARTESIAN_POINT('',(-0.801692905895,1.729539409553,3.251)); +#101836 = CARTESIAN_POINT('',(-0.827582878012,1.706300820123,3.251)); +#101837 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.251)); +#101838 = ORIENTED_EDGE('',*,*,#101839,.T.); +#101839 = EDGE_CURVE('',#101831,#101840,#101842,.T.); +#101840 = VERTEX_POINT('',#101841); +#101841 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.25)); +#101842 = LINE('',#101843,#101844); +#101843 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.251)); +#101844 = VECTOR('',#101845,1.); +#101845 = DIRECTION('',(-0.,-0.,-1.)); +#101846 = ORIENTED_EDGE('',*,*,#101847,.F.); +#101847 = EDGE_CURVE('',#101803,#101840,#101848,.T.); +#101848 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#101849,#101850,#101851, + #101852),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#101849 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.25)); +#101850 = CARTESIAN_POINT('',(-0.801692905895,1.729539409553,3.25)); +#101851 = CARTESIAN_POINT('',(-0.827582878012,1.706300820123,3.25)); +#101852 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.25)); +#101853 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#101854,#101855) + ,(#101856,#101857) + ,(#101858,#101859) + ,(#101860,#101861 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#101854 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.251)); +#101855 = CARTESIAN_POINT('',(-0.768238694938,1.729539409553,3.25)); +#101856 = CARTESIAN_POINT('',(-0.801692905895,1.729539409553,3.251)); +#101857 = CARTESIAN_POINT('',(-0.801692905895,1.729539409553,3.25)); +#101858 = CARTESIAN_POINT('',(-0.827582878012,1.706300820123,3.251)); +#101859 = CARTESIAN_POINT('',(-0.827582878012,1.706300820123,3.25)); +#101860 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.251)); +#101861 = CARTESIAN_POINT('',(-0.84598659313,1.659823641263,3.25)); +#101862 = ADVANCED_FACE('',(#101863),#101879,.F.); +#101863 = FACE_BOUND('',#101864,.T.); +#101864 = EDGE_LOOP('',(#101865,#101871,#101872,#101878)); +#101865 = ORIENTED_EDGE('',*,*,#101866,.T.); +#101866 = EDGE_CURVE('',#101840,#101394,#101867,.T.); +#101867 = LINE('',#101868,#101869); +#101868 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.25)); +#101869 = VECTOR('',#101870,1.); +#101870 = DIRECTION('',(-0.366797678951,-0.930300737781,-0.)); +#101871 = ORIENTED_EDGE('',*,*,#101419,.F.); +#101872 = ORIENTED_EDGE('',*,*,#101873,.F.); +#101873 = EDGE_CURVE('',#101831,#101412,#101874,.T.); +#101874 = LINE('',#101875,#101876); +#101875 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.251)); +#101876 = VECTOR('',#101877,1.); +#101877 = DIRECTION('',(-0.366797678951,-0.930300737781,-0.)); +#101878 = ORIENTED_EDGE('',*,*,#101839,.T.); +#101879 = PLANE('',#101880); +#101880 = AXIS2_PLACEMENT_3D('',#101881,#101882,#101883); +#101881 = CARTESIAN_POINT('',(-0.944867570972,1.409034031848,3.251)); +#101882 = DIRECTION('',(0.930300737781,-0.366797678951,0.)); +#101883 = DIRECTION('',(0.366797678951,0.930300737781,0.)); +#101884 = ADVANCED_FACE('',(#101885),#101902,.T.); +#101885 = FACE_BOUND('',#101886,.T.); +#101886 = EDGE_LOOP('',(#101887,#101888,#101889,#101890,#101891,#101892, + #101893,#101894,#101895,#101896,#101897,#101898,#101899,#101900, + #101901)); +#101887 = ORIENTED_EDGE('',*,*,#101411,.T.); +#101888 = ORIENTED_EDGE('',*,*,#101449,.T.); +#101889 = ORIENTED_EDGE('',*,*,#101465,.T.); +#101890 = ORIENTED_EDGE('',*,*,#101517,.T.); +#101891 = ORIENTED_EDGE('',*,*,#101548,.T.); +#101892 = ORIENTED_EDGE('',*,*,#101579,.T.); +#101893 = ORIENTED_EDGE('',*,*,#101610,.T.); +#101894 = ORIENTED_EDGE('',*,*,#101641,.T.); +#101895 = ORIENTED_EDGE('',*,*,#101672,.T.); +#101896 = ORIENTED_EDGE('',*,*,#101688,.T.); +#101897 = ORIENTED_EDGE('',*,*,#101725,.T.); +#101898 = ORIENTED_EDGE('',*,*,#101777,.T.); +#101899 = ORIENTED_EDGE('',*,*,#101793,.T.); +#101900 = ORIENTED_EDGE('',*,*,#101830,.T.); +#101901 = ORIENTED_EDGE('',*,*,#101873,.T.); +#101902 = PLANE('',#101903); +#101903 = AXIS2_PLACEMENT_3D('',#101904,#101905,#101906); +#101904 = CARTESIAN_POINT('',(-0.812756579974,1.712110467481,3.251)); +#101905 = DIRECTION('',(0.,0.,1.)); +#101906 = DIRECTION('',(1.,0.,-0.)); +#101907 = ADVANCED_FACE('',(#101908),#101925,.F.); +#101908 = FACE_BOUND('',#101909,.T.); +#101909 = EDGE_LOOP('',(#101910,#101911,#101912,#101913,#101914,#101915, + #101916,#101917,#101918,#101919,#101920,#101921,#101922,#101923, + #101924)); +#101910 = ORIENTED_EDGE('',*,*,#101393,.F.); +#101911 = ORIENTED_EDGE('',*,*,#101866,.F.); +#101912 = ORIENTED_EDGE('',*,*,#101847,.F.); +#101913 = ORIENTED_EDGE('',*,*,#101810,.F.); +#101914 = ORIENTED_EDGE('',*,*,#101761,.F.); +#101915 = ORIENTED_EDGE('',*,*,#101742,.F.); +#101916 = ORIENTED_EDGE('',*,*,#101705,.F.); +#101917 = ORIENTED_EDGE('',*,*,#101656,.F.); +#101918 = ORIENTED_EDGE('',*,*,#101625,.F.); +#101919 = ORIENTED_EDGE('',*,*,#101594,.F.); +#101920 = ORIENTED_EDGE('',*,*,#101563,.F.); +#101921 = ORIENTED_EDGE('',*,*,#101532,.F.); +#101922 = ORIENTED_EDGE('',*,*,#101501,.F.); +#101923 = ORIENTED_EDGE('',*,*,#101482,.F.); +#101924 = ORIENTED_EDGE('',*,*,#101433,.F.); +#101925 = PLANE('',#101926); +#101926 = AXIS2_PLACEMENT_3D('',#101927,#101928,#101929); +#101927 = CARTESIAN_POINT('',(-0.812756579974,1.712110467481,3.25)); +#101928 = DIRECTION('',(0.,0.,1.)); +#101929 = DIRECTION('',(1.,0.,-0.)); +#101930 = MANIFOLD_SOLID_BREP('',#101931); +#101931 = CLOSED_SHELL('',(#101932,#101972,#102003,#102034,#102065, + #102096,#102127,#102158,#102189,#102220,#102251,#102282,#102304, + #102324)); +#101932 = ADVANCED_FACE('',(#101933),#101967,.F.); +#101933 = FACE_BOUND('',#101934,.T.); +#101934 = EDGE_LOOP('',(#101935,#101945,#101953,#101961)); +#101935 = ORIENTED_EDGE('',*,*,#101936,.T.); +#101936 = EDGE_CURVE('',#101937,#101939,#101941,.T.); +#101937 = VERTEX_POINT('',#101938); +#101938 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.25)); +#101939 = VERTEX_POINT('',#101940); +#101940 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.25)); +#101941 = LINE('',#101942,#101943); +#101942 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.25)); +#101943 = VECTOR('',#101944,1.); +#101944 = DIRECTION('',(1.246929520517E-14,-1.,-0.)); +#101945 = ORIENTED_EDGE('',*,*,#101946,.F.); +#101946 = EDGE_CURVE('',#101947,#101939,#101949,.T.); +#101947 = VERTEX_POINT('',#101948); +#101948 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.251)); +#101949 = LINE('',#101950,#101951); +#101950 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.251)); +#101951 = VECTOR('',#101952,1.); +#101952 = DIRECTION('',(-0.,-0.,-1.)); +#101953 = ORIENTED_EDGE('',*,*,#101954,.F.); +#101954 = EDGE_CURVE('',#101955,#101947,#101957,.T.); +#101955 = VERTEX_POINT('',#101956); +#101956 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.251)); +#101957 = LINE('',#101958,#101959); +#101958 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.251)); +#101959 = VECTOR('',#101960,1.); +#101960 = DIRECTION('',(1.246929520517E-14,-1.,-0.)); +#101961 = ORIENTED_EDGE('',*,*,#101962,.T.); +#101962 = EDGE_CURVE('',#101955,#101937,#101963,.T.); +#101963 = LINE('',#101964,#101965); +#101964 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.251)); +#101965 = VECTOR('',#101966,1.); +#101966 = DIRECTION('',(-0.,-0.,-1.)); +#101967 = PLANE('',#101968); +#101968 = AXIS2_PLACEMENT_3D('',#101969,#101970,#101971); +#101969 = CARTESIAN_POINT('',(-1.150115783654,1.592135400911,3.251)); +#101970 = DIRECTION('',(1.,1.246929520517E-14,-0.)); +#101971 = DIRECTION('',(-1.246929520517E-14,1.,0.)); +#101972 = ADVANCED_FACE('',(#101973),#101998,.F.); +#101973 = FACE_BOUND('',#101974,.T.); +#101974 = EDGE_LOOP('',(#101975,#101983,#101991,#101997)); +#101975 = ORIENTED_EDGE('',*,*,#101976,.T.); +#101976 = EDGE_CURVE('',#101939,#101977,#101979,.T.); +#101977 = VERTEX_POINT('',#101978); +#101978 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.25)); +#101979 = LINE('',#101980,#101981); +#101980 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.25)); +#101981 = VECTOR('',#101982,1.); +#101982 = DIRECTION('',(1.,8.694974455156E-15,-0.)); +#101983 = ORIENTED_EDGE('',*,*,#101984,.F.); +#101984 = EDGE_CURVE('',#101985,#101977,#101987,.T.); +#101985 = VERTEX_POINT('',#101986); +#101986 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.251)); +#101987 = LINE('',#101988,#101989); +#101988 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.251)); +#101989 = VECTOR('',#101990,1.); +#101990 = DIRECTION('',(-0.,-0.,-1.)); +#101991 = ORIENTED_EDGE('',*,*,#101992,.F.); +#101992 = EDGE_CURVE('',#101947,#101985,#101993,.T.); +#101993 = LINE('',#101994,#101995); +#101994 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.251)); +#101995 = VECTOR('',#101996,1.); +#101996 = DIRECTION('',(1.,8.694974455156E-15,-0.)); +#101997 = ORIENTED_EDGE('',*,*,#101946,.T.); +#101998 = PLANE('',#101999); +#101999 = AXIS2_PLACEMENT_3D('',#102000,#102001,#102002); +#102000 = CARTESIAN_POINT('',(-1.02542281554,1.592135400911,3.251)); +#102001 = DIRECTION('',(-8.694974455156E-15,1.,0.)); +#102002 = DIRECTION('',(-1.,-8.694974455156E-15,0.)); +#102003 = ADVANCED_FACE('',(#102004),#102029,.F.); +#102004 = FACE_BOUND('',#102005,.T.); +#102005 = EDGE_LOOP('',(#102006,#102014,#102022,#102028)); +#102006 = ORIENTED_EDGE('',*,*,#102007,.T.); +#102007 = EDGE_CURVE('',#101977,#102008,#102010,.T.); +#102008 = VERTEX_POINT('',#102009); +#102009 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.25)); +#102010 = LINE('',#102011,#102012); +#102011 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.25)); +#102012 = VECTOR('',#102013,1.); +#102013 = DIRECTION('',(8.451832312333E-15,-1.,-0.)); +#102014 = ORIENTED_EDGE('',*,*,#102015,.F.); +#102015 = EDGE_CURVE('',#102016,#102008,#102018,.T.); +#102016 = VERTEX_POINT('',#102017); +#102017 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.251)); +#102018 = LINE('',#102019,#102020); +#102019 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.251)); +#102020 = VECTOR('',#102021,1.); +#102021 = DIRECTION('',(-0.,-0.,-1.)); +#102022 = ORIENTED_EDGE('',*,*,#102023,.F.); +#102023 = EDGE_CURVE('',#101985,#102016,#102024,.T.); +#102024 = LINE('',#102025,#102026); +#102025 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.251)); +#102026 = VECTOR('',#102027,1.); +#102027 = DIRECTION('',(8.451832312333E-15,-1.,-0.)); +#102028 = ORIENTED_EDGE('',*,*,#101984,.T.); +#102029 = PLANE('',#102030); +#102030 = AXIS2_PLACEMENT_3D('',#102031,#102032,#102033); +#102031 = CARTESIAN_POINT('',(-1.02542281554,1.489511294571,3.251)); +#102032 = DIRECTION('',(1.,8.451832312333E-15,-0.)); +#102033 = DIRECTION('',(-8.451832312333E-15,1.,0.)); +#102034 = ADVANCED_FACE('',(#102035),#102060,.F.); +#102035 = FACE_BOUND('',#102036,.T.); +#102036 = EDGE_LOOP('',(#102037,#102045,#102053,#102059)); +#102037 = ORIENTED_EDGE('',*,*,#102038,.T.); +#102038 = EDGE_CURVE('',#102008,#102039,#102041,.T.); +#102039 = VERTEX_POINT('',#102040); +#102040 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.25)); +#102041 = LINE('',#102042,#102043); +#102042 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.25)); +#102043 = VECTOR('',#102044,1.); +#102044 = DIRECTION('',(-1.,-5.962800923771E-15,-0.)); +#102045 = ORIENTED_EDGE('',*,*,#102046,.F.); +#102046 = EDGE_CURVE('',#102047,#102039,#102049,.T.); +#102047 = VERTEX_POINT('',#102048); +#102048 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.251)); +#102049 = LINE('',#102050,#102051); +#102050 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.251)); +#102051 = VECTOR('',#102052,1.); +#102052 = DIRECTION('',(-0.,-0.,-1.)); +#102053 = ORIENTED_EDGE('',*,*,#102054,.F.); +#102054 = EDGE_CURVE('',#102016,#102047,#102055,.T.); +#102055 = LINE('',#102056,#102057); +#102056 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.251)); +#102057 = VECTOR('',#102058,1.); +#102058 = DIRECTION('',(-1.,-5.962800923771E-15,-0.)); +#102059 = ORIENTED_EDGE('',*,*,#102015,.T.); +#102060 = PLANE('',#102061); +#102061 = AXIS2_PLACEMENT_3D('',#102062,#102063,#102064); +#102062 = CARTESIAN_POINT('',(-1.134519414908,1.489511294571,3.251)); +#102063 = DIRECTION('',(5.962800923771E-15,-1.,0.)); +#102064 = DIRECTION('',(1.,5.962800923771E-15,0.)); +#102065 = ADVANCED_FACE('',(#102066),#102091,.F.); +#102066 = FACE_BOUND('',#102067,.T.); +#102067 = EDGE_LOOP('',(#102068,#102076,#102084,#102090)); +#102068 = ORIENTED_EDGE('',*,*,#102069,.T.); +#102069 = EDGE_CURVE('',#102039,#102070,#102072,.T.); +#102070 = VERTEX_POINT('',#102071); +#102071 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.25)); +#102072 = LINE('',#102073,#102074); +#102073 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.25)); +#102074 = VECTOR('',#102075,1.); +#102075 = DIRECTION('',(1.241362870878E-14,-1.,-0.)); +#102076 = ORIENTED_EDGE('',*,*,#102077,.F.); +#102077 = EDGE_CURVE('',#102078,#102070,#102080,.T.); +#102078 = VERTEX_POINT('',#102079); +#102079 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.251)); +#102080 = LINE('',#102081,#102082); +#102081 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.251)); +#102082 = VECTOR('',#102083,1.); +#102083 = DIRECTION('',(-0.,-0.,-1.)); +#102084 = ORIENTED_EDGE('',*,*,#102085,.F.); +#102085 = EDGE_CURVE('',#102047,#102078,#102086,.T.); +#102086 = LINE('',#102087,#102088); +#102087 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.251)); +#102088 = VECTOR('',#102089,1.); +#102089 = DIRECTION('',(1.241362870878E-14,-1.,-0.)); +#102090 = ORIENTED_EDGE('',*,*,#102046,.T.); +#102091 = PLANE('',#102092); +#102092 = AXIS2_PLACEMENT_3D('',#102093,#102094,#102095); +#102093 = CARTESIAN_POINT('',(-1.134519414908,1.454575428583,3.251)); +#102094 = DIRECTION('',(1.,1.241362870878E-14,-0.)); +#102095 = DIRECTION('',(-1.241362870878E-14,1.,0.)); +#102096 = ADVANCED_FACE('',(#102097),#102122,.F.); +#102097 = FACE_BOUND('',#102098,.T.); +#102098 = EDGE_LOOP('',(#102099,#102107,#102115,#102121)); +#102099 = ORIENTED_EDGE('',*,*,#102100,.T.); +#102100 = EDGE_CURVE('',#102070,#102101,#102103,.T.); +#102101 = VERTEX_POINT('',#102102); +#102102 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.25)); +#102103 = LINE('',#102104,#102105); +#102104 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.25)); +#102105 = VECTOR('',#102106,1.); +#102106 = DIRECTION('',(1.,7.950401231695E-15,-0.)); +#102107 = ORIENTED_EDGE('',*,*,#102108,.F.); +#102108 = EDGE_CURVE('',#102109,#102101,#102111,.T.); +#102109 = VERTEX_POINT('',#102110); +#102110 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.251)); +#102111 = LINE('',#102112,#102113); +#102112 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.251)); +#102113 = VECTOR('',#102114,1.); +#102114 = DIRECTION('',(-0.,-0.,-1.)); +#102115 = ORIENTED_EDGE('',*,*,#102116,.F.); +#102116 = EDGE_CURVE('',#102078,#102109,#102117,.T.); +#102117 = LINE('',#102118,#102119); +#102118 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.251)); +#102119 = VECTOR('',#102120,1.); +#102120 = DIRECTION('',(1.,7.950401231695E-15,-0.)); +#102121 = ORIENTED_EDGE('',*,*,#102077,.T.); +#102122 = PLANE('',#102123); +#102123 = AXIS2_PLACEMENT_3D('',#102124,#102125,#102126); +#102124 = CARTESIAN_POINT('',(-1.02542281554,1.454575428583,3.251)); +#102125 = DIRECTION('',(-7.950401231695E-15,1.,0.)); +#102126 = DIRECTION('',(-1.,-7.950401231695E-15,0.)); +#102127 = ADVANCED_FACE('',(#102128),#102153,.F.); +#102128 = FACE_BOUND('',#102129,.T.); +#102129 = EDGE_LOOP('',(#102130,#102138,#102146,#102152)); +#102130 = ORIENTED_EDGE('',*,*,#102131,.T.); +#102131 = EDGE_CURVE('',#102101,#102132,#102134,.T.); +#102132 = VERTEX_POINT('',#102133); +#102133 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.25)); +#102134 = LINE('',#102135,#102136); +#102135 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.25)); +#102136 = VECTOR('',#102137,1.); +#102137 = DIRECTION('',(8.883874858512E-15,-1.,-0.)); +#102138 = ORIENTED_EDGE('',*,*,#102139,.F.); +#102139 = EDGE_CURVE('',#102140,#102132,#102142,.T.); +#102140 = VERTEX_POINT('',#102141); +#102141 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.251)); +#102142 = LINE('',#102143,#102144); +#102143 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.251)); +#102144 = VECTOR('',#102145,1.); +#102145 = DIRECTION('',(-0.,-0.,-1.)); +#102146 = ORIENTED_EDGE('',*,*,#102147,.F.); +#102147 = EDGE_CURVE('',#102109,#102140,#102148,.T.); +#102148 = LINE('',#102149,#102150); +#102149 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.251)); +#102150 = VECTOR('',#102151,1.); +#102151 = DIRECTION('',(8.883874858512E-15,-1.,-0.)); +#102152 = ORIENTED_EDGE('',*,*,#102108,.T.); +#102153 = PLANE('',#102154); +#102154 = AXIS2_PLACEMENT_3D('',#102155,#102156,#102157); +#102155 = CARTESIAN_POINT('',(-1.02542281554,1.35694216024,3.251)); +#102156 = DIRECTION('',(1.,8.883874858512E-15,-0.)); +#102157 = DIRECTION('',(-8.883874858512E-15,1.,0.)); +#102158 = ADVANCED_FACE('',(#102159),#102184,.F.); +#102159 = FACE_BOUND('',#102160,.T.); +#102160 = EDGE_LOOP('',(#102161,#102169,#102177,#102183)); +#102161 = ORIENTED_EDGE('',*,*,#102162,.T.); +#102162 = EDGE_CURVE('',#102132,#102163,#102165,.T.); +#102163 = VERTEX_POINT('',#102164); +#102164 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.25)); +#102165 = LINE('',#102166,#102167); +#102166 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.25)); +#102167 = VECTOR('',#102168,1.); +#102168 = DIRECTION('',(-1.,-7.365967763628E-15,-0.)); +#102169 = ORIENTED_EDGE('',*,*,#102170,.F.); +#102170 = EDGE_CURVE('',#102171,#102163,#102173,.T.); +#102171 = VERTEX_POINT('',#102172); +#102172 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.251)); +#102173 = LINE('',#102174,#102175); +#102174 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.251)); +#102175 = VECTOR('',#102176,1.); +#102176 = DIRECTION('',(-0.,-0.,-1.)); +#102177 = ORIENTED_EDGE('',*,*,#102178,.F.); +#102178 = EDGE_CURVE('',#102140,#102171,#102179,.T.); +#102179 = LINE('',#102180,#102181); +#102180 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.251)); +#102181 = VECTOR('',#102182,1.); +#102182 = DIRECTION('',(-1.,-7.365967763628E-15,-0.)); +#102183 = ORIENTED_EDGE('',*,*,#102139,.T.); +#102184 = PLANE('',#102185); +#102185 = AXIS2_PLACEMENT_3D('',#102186,#102187,#102188); +#102186 = CARTESIAN_POINT('',(-1.143175399562,1.35694216024,3.251)); +#102187 = DIRECTION('',(7.365967763628E-15,-1.,0.)); +#102188 = DIRECTION('',(1.,7.365967763628E-15,0.)); +#102189 = ADVANCED_FACE('',(#102190),#102215,.F.); +#102190 = FACE_BOUND('',#102191,.T.); +#102191 = EDGE_LOOP('',(#102192,#102200,#102208,#102214)); +#102192 = ORIENTED_EDGE('',*,*,#102193,.T.); +#102193 = EDGE_CURVE('',#102163,#102194,#102196,.T.); +#102194 = VERTEX_POINT('',#102195); +#102195 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.25)); +#102196 = LINE('',#102197,#102198); +#102197 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.25)); +#102198 = VECTOR('',#102199,1.); +#102199 = DIRECTION('',(1.23584570257E-14,-1.,-0.)); +#102200 = ORIENTED_EDGE('',*,*,#102201,.F.); +#102201 = EDGE_CURVE('',#102202,#102194,#102204,.T.); +#102202 = VERTEX_POINT('',#102203); +#102203 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.251)); +#102204 = LINE('',#102205,#102206); +#102205 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.251)); +#102206 = VECTOR('',#102207,1.); +#102207 = DIRECTION('',(-0.,-0.,-1.)); +#102208 = ORIENTED_EDGE('',*,*,#102209,.F.); +#102209 = EDGE_CURVE('',#102171,#102202,#102210,.T.); +#102210 = LINE('',#102211,#102212); +#102211 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.251)); +#102212 = VECTOR('',#102213,1.); +#102213 = DIRECTION('',(1.23584570257E-14,-1.,-0.)); +#102214 = ORIENTED_EDGE('',*,*,#102170,.T.); +#102215 = PLANE('',#102216); +#102216 = AXIS2_PLACEMENT_3D('',#102217,#102218,#102219); +#102217 = CARTESIAN_POINT('',(-1.143175399562,1.321850330564,3.251)); +#102218 = DIRECTION('',(1.,1.23584570257E-14,-0.)); +#102219 = DIRECTION('',(-1.23584570257E-14,1.,0.)); +#102220 = ADVANCED_FACE('',(#102221),#102246,.F.); +#102221 = FACE_BOUND('',#102222,.T.); +#102222 = EDGE_LOOP('',(#102223,#102231,#102239,#102245)); +#102223 = ORIENTED_EDGE('',*,*,#102224,.T.); +#102224 = EDGE_CURVE('',#102194,#102225,#102227,.T.); +#102225 = VERTEX_POINT('',#102226); +#102226 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.25)); +#102227 = LINE('',#102228,#102229); +#102228 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.25)); +#102229 = VECTOR('',#102230,1.); +#102230 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#102231 = ORIENTED_EDGE('',*,*,#102232,.F.); +#102232 = EDGE_CURVE('',#102233,#102225,#102235,.T.); +#102233 = VERTEX_POINT('',#102234); +#102234 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.251)); +#102235 = LINE('',#102236,#102237); +#102236 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.251)); +#102237 = VECTOR('',#102238,1.); +#102238 = DIRECTION('',(-0.,-0.,-1.)); +#102239 = ORIENTED_EDGE('',*,*,#102240,.F.); +#102240 = EDGE_CURVE('',#102202,#102233,#102241,.T.); +#102241 = LINE('',#102242,#102243); +#102242 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.251)); +#102243 = VECTOR('',#102244,1.); +#102244 = DIRECTION('',(1.,6.899882954709E-15,-0.)); +#102245 = ORIENTED_EDGE('',*,*,#102201,.T.); +#102246 = PLANE('',#102247); +#102247 = AXIS2_PLACEMENT_3D('',#102248,#102249,#102250); +#102248 = CARTESIAN_POINT('',(-0.986041984459,1.321850330564,3.251)); +#102249 = DIRECTION('',(-6.899882954709E-15,1.,0.)); +#102250 = DIRECTION('',(-1.,-6.899882954709E-15,0.)); +#102251 = ADVANCED_FACE('',(#102252),#102277,.F.); +#102252 = FACE_BOUND('',#102253,.T.); +#102253 = EDGE_LOOP('',(#102254,#102262,#102270,#102276)); +#102254 = ORIENTED_EDGE('',*,*,#102255,.T.); +#102255 = EDGE_CURVE('',#102225,#102256,#102258,.T.); +#102256 = VERTEX_POINT('',#102257); +#102257 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.25)); +#102258 = LINE('',#102259,#102260); +#102259 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.25)); +#102260 = VECTOR('',#102261,1.); +#102261 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#102262 = ORIENTED_EDGE('',*,*,#102263,.F.); +#102263 = EDGE_CURVE('',#102264,#102256,#102266,.T.); +#102264 = VERTEX_POINT('',#102265); +#102265 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.251)); +#102266 = LINE('',#102267,#102268); +#102267 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.251)); +#102268 = VECTOR('',#102269,1.); +#102269 = DIRECTION('',(-0.,-0.,-1.)); +#102270 = ORIENTED_EDGE('',*,*,#102271,.F.); +#102271 = EDGE_CURVE('',#102233,#102264,#102272,.T.); +#102272 = LINE('',#102273,#102274); +#102273 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.251)); +#102274 = VECTOR('',#102275,1.); +#102275 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#102276 = ORIENTED_EDGE('',*,*,#102232,.T.); +#102277 = PLANE('',#102278); +#102278 = AXIS2_PLACEMENT_3D('',#102279,#102280,#102281); +#102279 = CARTESIAN_POINT('',(-0.986041984459,1.626915303211,3.251)); +#102280 = DIRECTION('',(-1.,-7.108008258556E-15,0.)); +#102281 = DIRECTION('',(7.108008258556E-15,-1.,0.)); +#102282 = ADVANCED_FACE('',(#102283),#102299,.F.); +#102283 = FACE_BOUND('',#102284,.T.); +#102284 = EDGE_LOOP('',(#102285,#102291,#102292,#102298)); +#102285 = ORIENTED_EDGE('',*,*,#102286,.T.); +#102286 = EDGE_CURVE('',#102256,#101937,#102287,.T.); +#102287 = LINE('',#102288,#102289); +#102288 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.25)); +#102289 = VECTOR('',#102290,1.); +#102290 = DIRECTION('',(-1.,-7.929618338614E-15,-0.)); +#102291 = ORIENTED_EDGE('',*,*,#101962,.F.); +#102292 = ORIENTED_EDGE('',*,*,#102293,.F.); +#102293 = EDGE_CURVE('',#102264,#101955,#102294,.T.); +#102294 = LINE('',#102295,#102296); +#102295 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.251)); +#102296 = VECTOR('',#102297,1.); +#102297 = DIRECTION('',(-1.,-7.929618338614E-15,-0.)); +#102298 = ORIENTED_EDGE('',*,*,#102263,.T.); +#102299 = PLANE('',#102300); +#102300 = AXIS2_PLACEMENT_3D('',#102301,#102302,#102303); +#102301 = CARTESIAN_POINT('',(-1.150115783654,1.626915303211,3.251)); +#102302 = DIRECTION('',(7.929618338614E-15,-1.,0.)); +#102303 = DIRECTION('',(1.,7.929618338614E-15,0.)); +#102304 = ADVANCED_FACE('',(#102305),#102319,.F.); +#102305 = FACE_BOUND('',#102306,.T.); +#102306 = EDGE_LOOP('',(#102307,#102308,#102309,#102310,#102311,#102312, + #102313,#102314,#102315,#102316,#102317,#102318)); +#102307 = ORIENTED_EDGE('',*,*,#101954,.T.); +#102308 = ORIENTED_EDGE('',*,*,#101992,.T.); +#102309 = ORIENTED_EDGE('',*,*,#102023,.T.); +#102310 = ORIENTED_EDGE('',*,*,#102054,.T.); +#102311 = ORIENTED_EDGE('',*,*,#102085,.T.); +#102312 = ORIENTED_EDGE('',*,*,#102116,.T.); +#102313 = ORIENTED_EDGE('',*,*,#102147,.T.); +#102314 = ORIENTED_EDGE('',*,*,#102178,.T.); +#102315 = ORIENTED_EDGE('',*,*,#102209,.T.); +#102316 = ORIENTED_EDGE('',*,*,#102240,.T.); +#102317 = ORIENTED_EDGE('',*,*,#102271,.T.); +#102318 = ORIENTED_EDGE('',*,*,#102293,.T.); +#102319 = PLANE('',#102320); +#102320 = AXIS2_PLACEMENT_3D('',#102321,#102322,#102323); +#102321 = CARTESIAN_POINT('',(0.,0.,3.251)); +#102322 = DIRECTION('',(0.,0.,-1.)); +#102323 = DIRECTION('',(-1.,0.,-0.)); +#102324 = ADVANCED_FACE('',(#102325),#102339,.T.); +#102325 = FACE_BOUND('',#102326,.T.); +#102326 = EDGE_LOOP('',(#102327,#102328,#102329,#102330,#102331,#102332, + #102333,#102334,#102335,#102336,#102337,#102338)); +#102327 = ORIENTED_EDGE('',*,*,#101936,.F.); +#102328 = ORIENTED_EDGE('',*,*,#102286,.F.); +#102329 = ORIENTED_EDGE('',*,*,#102255,.F.); +#102330 = ORIENTED_EDGE('',*,*,#102224,.F.); +#102331 = ORIENTED_EDGE('',*,*,#102193,.F.); +#102332 = ORIENTED_EDGE('',*,*,#102162,.F.); +#102333 = ORIENTED_EDGE('',*,*,#102131,.F.); +#102334 = ORIENTED_EDGE('',*,*,#102100,.F.); +#102335 = ORIENTED_EDGE('',*,*,#102069,.F.); +#102336 = ORIENTED_EDGE('',*,*,#102038,.F.); +#102337 = ORIENTED_EDGE('',*,*,#102007,.F.); +#102338 = ORIENTED_EDGE('',*,*,#101976,.F.); +#102339 = PLANE('',#102340); +#102340 = AXIS2_PLACEMENT_3D('',#102341,#102342,#102343); +#102341 = CARTESIAN_POINT('',(0.,0.,3.25)); +#102342 = DIRECTION('',(0.,0.,-1.)); +#102343 = DIRECTION('',(-1.,0.,-0.)); +#102344 = MANIFOLD_SOLID_BREP('',#102345); +#102345 = CLOSED_SHELL('',(#102346,#102476,#102606,#102628,#102649, + #102670,#102691,#102712,#102729,#102741,#102763,#102780,#102797, + #102818,#102839,#102860)); +#102346 = ADVANCED_FACE('',(#102347,#102409),#102471,.T.); +#102347 = FACE_BOUND('',#102348,.T.); +#102348 = EDGE_LOOP('',(#102349,#102359,#102368,#102377,#102386,#102395, + #102403)); +#102349 = ORIENTED_EDGE('',*,*,#102350,.T.); +#102350 = EDGE_CURVE('',#102351,#102353,#102355,.T.); +#102351 = VERTEX_POINT('',#102352); +#102352 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.251)); +#102353 = VERTEX_POINT('',#102354); +#102354 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102355 = LINE('',#102356,#102357); +#102356 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102357 = VECTOR('',#102358,1.); +#102358 = DIRECTION('',(-1.,-7.752749528092E-15,-0.)); +#102359 = ORIENTED_EDGE('',*,*,#102360,.T.); +#102360 = EDGE_CURVE('',#102353,#102361,#102363,.T.); +#102361 = VERTEX_POINT('',#102362); +#102362 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102363 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102364,#102365,#102366, + #102367),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#102364 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102365 = CARTESIAN_POINT('',(-1.339923591277,1.626915303211,3.251)); +#102366 = CARTESIAN_POINT('',(-1.379460386046,1.612722607655,3.251)); +#102367 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102368 = ORIENTED_EDGE('',*,*,#102369,.T.); +#102369 = EDGE_CURVE('',#102361,#102370,#102372,.T.); +#102370 = VERTEX_POINT('',#102371); +#102371 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102372 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102373,#102374,#102375, + #102376),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#102373 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102374 = CARTESIAN_POINT('',(-1.440754115212,1.555639898048,3.251)); +#102375 = CARTESIAN_POINT('',(-1.456116538427,1.517740722,3.251)); +#102376 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102377 = ORIENTED_EDGE('',*,*,#102378,.T.); +#102378 = EDGE_CURVE('',#102370,#102379,#102381,.T.); +#102379 = VERTEX_POINT('',#102380); +#102380 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102381 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102382,#102383,#102384, + #102385),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#102382 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102383 = CARTESIAN_POINT('',(-1.456116538427,1.425254255343,3.251)); +#102384 = CARTESIAN_POINT('',(-1.440754115212,1.389226643542,3.251)); +#102385 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102386 = ORIENTED_EDGE('',*,*,#102387,.T.); +#102387 = EDGE_CURVE('',#102379,#102388,#102390,.T.); +#102388 = VERTEX_POINT('',#102389); +#102389 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.251)); +#102390 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102391,#102392,#102393, + #102394),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#102391 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102392 = CARTESIAN_POINT('',(-1.379460386046,1.335263207686,3.251)); +#102393 = CARTESIAN_POINT('',(-1.341015337088,1.321850330564,3.251)); +#102394 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.251)); +#102395 = ORIENTED_EDGE('',*,*,#102396,.T.); +#102396 = EDGE_CURVE('',#102388,#102397,#102399,.T.); +#102397 = VERTEX_POINT('',#102398); +#102398 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.251)); +#102399 = LINE('',#102400,#102401); +#102400 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.251)); +#102401 = VECTOR('',#102402,1.); +#102402 = DIRECTION('',(1.,7.474873201048E-15,-0.)); +#102403 = ORIENTED_EDGE('',*,*,#102404,.T.); +#102404 = EDGE_CURVE('',#102397,#102351,#102405,.T.); +#102405 = LINE('',#102406,#102407); +#102406 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.251)); +#102407 = VECTOR('',#102408,1.); +#102408 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#102409 = FACE_BOUND('',#102410,.T.); +#102410 = EDGE_LOOP('',(#102411,#102421,#102429,#102438,#102447,#102456, + #102465)); +#102411 = ORIENTED_EDGE('',*,*,#102412,.F.); +#102412 = EDGE_CURVE('',#102413,#102415,#102417,.T.); +#102413 = VERTEX_POINT('',#102414); +#102414 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.251)); +#102415 = VERTEX_POINT('',#102416); +#102416 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.251)); +#102417 = LINE('',#102418,#102419); +#102418 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.251)); +#102419 = VECTOR('',#102420,1.); +#102420 = DIRECTION('',(-7.375736951568E-15,1.,0.)); +#102421 = ORIENTED_EDGE('',*,*,#102422,.F.); +#102422 = EDGE_CURVE('',#102423,#102413,#102425,.T.); +#102423 = VERTEX_POINT('',#102424); +#102424 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102425 = LINE('',#102426,#102427); +#102426 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102427 = VECTOR('',#102428,1.); +#102428 = DIRECTION('',(1.,4.70499632957E-15,0.)); +#102429 = ORIENTED_EDGE('',*,*,#102430,.F.); +#102430 = EDGE_CURVE('',#102431,#102423,#102433,.T.); +#102431 = VERTEX_POINT('',#102432); +#102432 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102433 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102434,#102435,#102436, + #102437),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#102434 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102435 = CARTESIAN_POINT('',(-1.358951161145,1.366455945176,3.251)); +#102436 = CARTESIAN_POINT('',(-1.329552006062,1.35694216024,3.251)); +#102437 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102438 = ORIENTED_EDGE('',*,*,#102439,.F.); +#102439 = EDGE_CURVE('',#102440,#102431,#102442,.T.); +#102440 = VERTEX_POINT('',#102441); +#102441 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102442 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102443,#102444,#102445, + #102446),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#102443 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102444 = CARTESIAN_POINT('',(-1.414708179407,1.433520330776,3.251)); +#102445 = CARTESIAN_POINT('',(-1.403556775754,1.404823012288,3.251)); +#102446 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102447 = ORIENTED_EDGE('',*,*,#102448,.F.); +#102448 = EDGE_CURVE('',#102449,#102440,#102451,.T.); +#102449 = VERTEX_POINT('',#102450); +#102450 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102451 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102452,#102453,#102454, + #102455),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#102452 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102453 = CARTESIAN_POINT('',(-1.403868703131,1.539263710866,3.251)); +#102454 = CARTESIAN_POINT('',(-1.414708179407,1.509630610251,3.251)); +#102455 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102456 = ORIENTED_EDGE('',*,*,#102457,.F.); +#102457 = EDGE_CURVE('',#102458,#102449,#102460,.T.); +#102458 = VERTEX_POINT('',#102459); +#102459 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.251)); +#102460 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102461,#102462,#102463, + #102464),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#102461 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.251)); +#102462 = CARTESIAN_POINT('',(-1.330175860811,1.592135400911,3.251)); +#102463 = CARTESIAN_POINT('',(-1.360432816176,1.581529870166,3.251)); +#102464 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102465 = ORIENTED_EDGE('',*,*,#102466,.F.); +#102466 = EDGE_CURVE('',#102415,#102458,#102467,.T.); +#102467 = LINE('',#102468,#102469); +#102468 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.251)); +#102469 = VECTOR('',#102470,1.); +#102470 = DIRECTION('',(-1.,-9.791031094293E-15,0.)); +#102471 = PLANE('',#102472); +#102472 = AXIS2_PLACEMENT_3D('',#102473,#102474,#102475); +#102473 = CARTESIAN_POINT('',(-1.358288315474,1.331929483866,3.251)); +#102474 = DIRECTION('',(0.,0.,1.)); +#102475 = DIRECTION('',(1.,0.,-0.)); +#102476 = ADVANCED_FACE('',(#102477,#102539),#102601,.F.); +#102477 = FACE_BOUND('',#102478,.T.); +#102478 = EDGE_LOOP('',(#102479,#102489,#102497,#102505,#102514,#102523, + #102532)); +#102479 = ORIENTED_EDGE('',*,*,#102480,.F.); +#102480 = EDGE_CURVE('',#102481,#102483,#102485,.T.); +#102481 = VERTEX_POINT('',#102482); +#102482 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.25)); +#102483 = VERTEX_POINT('',#102484); +#102484 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.25)); +#102485 = LINE('',#102486,#102487); +#102486 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.25)); +#102487 = VECTOR('',#102488,1.); +#102488 = DIRECTION('',(-1.,-7.752749528092E-15,-0.)); +#102489 = ORIENTED_EDGE('',*,*,#102490,.F.); +#102490 = EDGE_CURVE('',#102491,#102481,#102493,.T.); +#102491 = VERTEX_POINT('',#102492); +#102492 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.25)); +#102493 = LINE('',#102494,#102495); +#102494 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.25)); +#102495 = VECTOR('',#102496,1.); +#102496 = DIRECTION('',(-7.108008258556E-15,1.,-0.)); +#102497 = ORIENTED_EDGE('',*,*,#102498,.F.); +#102498 = EDGE_CURVE('',#102499,#102491,#102501,.T.); +#102499 = VERTEX_POINT('',#102500); +#102500 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.25)); +#102501 = LINE('',#102502,#102503); +#102502 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.25)); +#102503 = VECTOR('',#102504,1.); +#102504 = DIRECTION('',(1.,7.474873201048E-15,-0.)); +#102505 = ORIENTED_EDGE('',*,*,#102506,.F.); +#102506 = EDGE_CURVE('',#102507,#102499,#102509,.T.); +#102507 = VERTEX_POINT('',#102508); +#102508 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.25)); +#102509 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102510,#102511,#102512, + #102513),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#102510 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.25)); +#102511 = CARTESIAN_POINT('',(-1.379460386046,1.335263207686,3.25)); +#102512 = CARTESIAN_POINT('',(-1.341015337088,1.321850330564,3.25)); +#102513 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.25)); +#102514 = ORIENTED_EDGE('',*,*,#102515,.F.); +#102515 = EDGE_CURVE('',#102516,#102507,#102518,.T.); +#102516 = VERTEX_POINT('',#102517); +#102517 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.25)); +#102518 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102519,#102520,#102521, + #102522),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#102519 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.25)); +#102520 = CARTESIAN_POINT('',(-1.456116538427,1.425254255343,3.25)); +#102521 = CARTESIAN_POINT('',(-1.440754115212,1.389226643542,3.25)); +#102522 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.25)); +#102523 = ORIENTED_EDGE('',*,*,#102524,.F.); +#102524 = EDGE_CURVE('',#102525,#102516,#102527,.T.); +#102525 = VERTEX_POINT('',#102526); +#102526 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.25)); +#102527 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102528,#102529,#102530, + #102531),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#102528 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.25)); +#102529 = CARTESIAN_POINT('',(-1.440754115212,1.555639898048,3.25)); +#102530 = CARTESIAN_POINT('',(-1.456116538427,1.517740722,3.25)); +#102531 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.25)); +#102532 = ORIENTED_EDGE('',*,*,#102533,.F.); +#102533 = EDGE_CURVE('',#102483,#102525,#102534,.T.); +#102534 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102535,#102536,#102537, + #102538),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#102535 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.25)); +#102536 = CARTESIAN_POINT('',(-1.339923591277,1.626915303211,3.25)); +#102537 = CARTESIAN_POINT('',(-1.379460386046,1.612722607655,3.25)); +#102538 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.25)); +#102539 = FACE_BOUND('',#102540,.T.); +#102540 = EDGE_LOOP('',(#102541,#102551,#102559,#102567,#102576,#102585, + #102594)); +#102541 = ORIENTED_EDGE('',*,*,#102542,.T.); +#102542 = EDGE_CURVE('',#102543,#102545,#102547,.T.); +#102543 = VERTEX_POINT('',#102544); +#102544 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.25)); +#102545 = VERTEX_POINT('',#102546); +#102546 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.25)); +#102547 = LINE('',#102548,#102549); +#102548 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.25)); +#102549 = VECTOR('',#102550,1.); +#102550 = DIRECTION('',(1.,4.70499632957E-15,0.)); +#102551 = ORIENTED_EDGE('',*,*,#102552,.T.); +#102552 = EDGE_CURVE('',#102545,#102553,#102555,.T.); +#102553 = VERTEX_POINT('',#102554); +#102554 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.25)); +#102555 = LINE('',#102556,#102557); +#102556 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.25)); +#102557 = VECTOR('',#102558,1.); +#102558 = DIRECTION('',(-7.375736951568E-15,1.,0.)); +#102559 = ORIENTED_EDGE('',*,*,#102560,.T.); +#102560 = EDGE_CURVE('',#102553,#102561,#102563,.T.); +#102561 = VERTEX_POINT('',#102562); +#102562 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.25)); +#102563 = LINE('',#102564,#102565); +#102564 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.25)); +#102565 = VECTOR('',#102566,1.); +#102566 = DIRECTION('',(-1.,-9.791031094293E-15,0.)); +#102567 = ORIENTED_EDGE('',*,*,#102568,.T.); +#102568 = EDGE_CURVE('',#102561,#102569,#102571,.T.); +#102569 = VERTEX_POINT('',#102570); +#102570 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.25)); +#102571 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102572,#102573,#102574, + #102575),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#102572 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.25)); +#102573 = CARTESIAN_POINT('',(-1.330175860811,1.592135400911,3.25)); +#102574 = CARTESIAN_POINT('',(-1.360432816176,1.581529870166,3.25)); +#102575 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.25)); +#102576 = ORIENTED_EDGE('',*,*,#102577,.T.); +#102577 = EDGE_CURVE('',#102569,#102578,#102580,.T.); +#102578 = VERTEX_POINT('',#102579); +#102579 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.25)); +#102580 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102581,#102582,#102583, + #102584),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#102581 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.25)); +#102582 = CARTESIAN_POINT('',(-1.403868703131,1.539263710866,3.25)); +#102583 = CARTESIAN_POINT('',(-1.414708179407,1.509630610251,3.25)); +#102584 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.25)); +#102585 = ORIENTED_EDGE('',*,*,#102586,.T.); +#102586 = EDGE_CURVE('',#102578,#102587,#102589,.T.); +#102587 = VERTEX_POINT('',#102588); +#102588 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.25)); +#102589 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102590,#102591,#102592, + #102593),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#102590 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.25)); +#102591 = CARTESIAN_POINT('',(-1.414708179407,1.433520330776,3.25)); +#102592 = CARTESIAN_POINT('',(-1.403556775754,1.404823012288,3.25)); +#102593 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.25)); +#102594 = ORIENTED_EDGE('',*,*,#102595,.T.); +#102595 = EDGE_CURVE('',#102587,#102543,#102596,.T.); +#102596 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102597,#102598,#102599, + #102600),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#102597 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.25)); +#102598 = CARTESIAN_POINT('',(-1.358951161145,1.366455945176,3.25)); +#102599 = CARTESIAN_POINT('',(-1.329552006062,1.35694216024,3.25)); +#102600 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.25)); +#102601 = PLANE('',#102602); +#102602 = AXIS2_PLACEMENT_3D('',#102603,#102604,#102605); +#102603 = CARTESIAN_POINT('',(-1.358288315474,1.331929483866,3.25)); +#102604 = DIRECTION('',(0.,0.,1.)); +#102605 = DIRECTION('',(1.,0.,-0.)); +#102606 = ADVANCED_FACE('',(#102607),#102623,.F.); +#102607 = FACE_BOUND('',#102608,.T.); +#102608 = EDGE_LOOP('',(#102609,#102610,#102616,#102617)); +#102609 = ORIENTED_EDGE('',*,*,#102480,.T.); +#102610 = ORIENTED_EDGE('',*,*,#102611,.F.); +#102611 = EDGE_CURVE('',#102353,#102483,#102612,.T.); +#102612 = LINE('',#102613,#102614); +#102613 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102614 = VECTOR('',#102615,1.); +#102615 = DIRECTION('',(-0.,-0.,-1.)); +#102616 = ORIENTED_EDGE('',*,*,#102350,.F.); +#102617 = ORIENTED_EDGE('',*,*,#102618,.T.); +#102618 = EDGE_CURVE('',#102351,#102481,#102619,.T.); +#102619 = LINE('',#102620,#102621); +#102620 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.251)); +#102621 = VECTOR('',#102622,1.); +#102622 = DIRECTION('',(-0.,-0.,-1.)); +#102623 = PLANE('',#102624); +#102624 = AXIS2_PLACEMENT_3D('',#102625,#102626,#102627); +#102625 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102626 = DIRECTION('',(7.752749528092E-15,-1.,0.)); +#102627 = DIRECTION('',(1.,7.752749528092E-15,0.)); +#102628 = ADVANCED_FACE('',(#102629),#102640,.F.); +#102629 = FACE_BOUND('',#102630,.F.); +#102630 = EDGE_LOOP('',(#102631,#102632,#102633,#102639)); +#102631 = ORIENTED_EDGE('',*,*,#102611,.F.); +#102632 = ORIENTED_EDGE('',*,*,#102360,.T.); +#102633 = ORIENTED_EDGE('',*,*,#102634,.T.); +#102634 = EDGE_CURVE('',#102361,#102525,#102635,.T.); +#102635 = LINE('',#102636,#102637); +#102636 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102637 = VECTOR('',#102638,1.); +#102638 = DIRECTION('',(-0.,-0.,-1.)); +#102639 = ORIENTED_EDGE('',*,*,#102533,.F.); +#102640 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102641,#102642) + ,(#102643,#102644) + ,(#102645,#102646) + ,(#102647,#102648 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102641 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.251)); +#102642 = CARTESIAN_POINT('',(-1.291652830013,1.626915303211,3.25)); +#102643 = CARTESIAN_POINT('',(-1.339923591277,1.626915303211,3.251)); +#102644 = CARTESIAN_POINT('',(-1.339923591277,1.626915303211,3.25)); +#102645 = CARTESIAN_POINT('',(-1.379460386046,1.612722607655,3.251)); +#102646 = CARTESIAN_POINT('',(-1.379460386046,1.612722607655,3.25)); +#102647 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102648 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.25)); +#102649 = ADVANCED_FACE('',(#102650),#102661,.F.); +#102650 = FACE_BOUND('',#102651,.F.); +#102651 = EDGE_LOOP('',(#102652,#102653,#102654,#102660)); +#102652 = ORIENTED_EDGE('',*,*,#102634,.F.); +#102653 = ORIENTED_EDGE('',*,*,#102369,.T.); +#102654 = ORIENTED_EDGE('',*,*,#102655,.T.); +#102655 = EDGE_CURVE('',#102370,#102516,#102656,.T.); +#102656 = LINE('',#102657,#102658); +#102657 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102658 = VECTOR('',#102659,1.); +#102659 = DIRECTION('',(-0.,-0.,-1.)); +#102660 = ORIENTED_EDGE('',*,*,#102524,.F.); +#102661 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102662,#102663) + ,(#102664,#102665) + ,(#102666,#102667) + ,(#102668,#102669 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102662 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.251)); +#102663 = CARTESIAN_POINT('',(-1.410107250628,1.584181252852,3.25)); +#102664 = CARTESIAN_POINT('',(-1.440754115212,1.555639898048,3.251)); +#102665 = CARTESIAN_POINT('',(-1.440754115212,1.555639898048,3.25)); +#102666 = CARTESIAN_POINT('',(-1.456116538427,1.517740722,3.251)); +#102667 = CARTESIAN_POINT('',(-1.456116538427,1.517740722,3.25)); +#102668 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102669 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.25)); +#102670 = ADVANCED_FACE('',(#102671),#102682,.F.); +#102671 = FACE_BOUND('',#102672,.F.); +#102672 = EDGE_LOOP('',(#102673,#102674,#102675,#102681)); +#102673 = ORIENTED_EDGE('',*,*,#102655,.F.); +#102674 = ORIENTED_EDGE('',*,*,#102378,.T.); +#102675 = ORIENTED_EDGE('',*,*,#102676,.T.); +#102676 = EDGE_CURVE('',#102379,#102507,#102677,.T.); +#102677 = LINE('',#102678,#102679); +#102678 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102679 = VECTOR('',#102680,1.); +#102680 = DIRECTION('',(-0.,-0.,-1.)); +#102681 = ORIENTED_EDGE('',*,*,#102515,.F.); +#102682 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102683,#102684) + ,(#102685,#102686) + ,(#102687,#102688) + ,(#102689,#102690 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102683 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.251)); +#102684 = CARTESIAN_POINT('',(-1.456116538427,1.470483724703,3.25)); +#102685 = CARTESIAN_POINT('',(-1.456116538427,1.425254255343,3.251)); +#102686 = CARTESIAN_POINT('',(-1.456116538427,1.425254255343,3.25)); +#102687 = CARTESIAN_POINT('',(-1.440754115212,1.389226643542,3.251)); +#102688 = CARTESIAN_POINT('',(-1.440754115212,1.389226643542,3.25)); +#102689 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102690 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.25)); +#102691 = ADVANCED_FACE('',(#102692),#102703,.F.); +#102692 = FACE_BOUND('',#102693,.F.); +#102693 = EDGE_LOOP('',(#102694,#102695,#102696,#102702)); +#102694 = ORIENTED_EDGE('',*,*,#102676,.F.); +#102695 = ORIENTED_EDGE('',*,*,#102387,.T.); +#102696 = ORIENTED_EDGE('',*,*,#102697,.T.); +#102697 = EDGE_CURVE('',#102388,#102499,#102698,.T.); +#102698 = LINE('',#102699,#102700); +#102699 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.251)); +#102700 = VECTOR('',#102701,1.); +#102701 = DIRECTION('',(-0.,-0.,-1.)); +#102702 = ORIENTED_EDGE('',*,*,#102506,.F.); +#102703 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102704,#102705) + ,(#102706,#102707) + ,(#102708,#102709) + ,(#102710,#102711 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102704 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.251)); +#102705 = CARTESIAN_POINT('',(-1.410107250628,1.362244925613,3.25)); +#102706 = CARTESIAN_POINT('',(-1.379460386046,1.335263207686,3.251)); +#102707 = CARTESIAN_POINT('',(-1.379460386046,1.335263207686,3.25)); +#102708 = CARTESIAN_POINT('',(-1.341015337088,1.321850330564,3.251)); +#102709 = CARTESIAN_POINT('',(-1.341015337088,1.321850330564,3.25)); +#102710 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.251)); +#102711 = CARTESIAN_POINT('',(-1.294772103761,1.321850330564,3.25)); +#102712 = ADVANCED_FACE('',(#102713),#102724,.F.); +#102713 = FACE_BOUND('',#102714,.T.); +#102714 = EDGE_LOOP('',(#102715,#102716,#102722,#102723)); +#102715 = ORIENTED_EDGE('',*,*,#102498,.T.); +#102716 = ORIENTED_EDGE('',*,*,#102717,.F.); +#102717 = EDGE_CURVE('',#102397,#102491,#102718,.T.); +#102718 = LINE('',#102719,#102720); +#102719 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.251)); +#102720 = VECTOR('',#102721,1.); +#102721 = DIRECTION('',(-0.,-0.,-1.)); +#102722 = ORIENTED_EDGE('',*,*,#102396,.F.); +#102723 = ORIENTED_EDGE('',*,*,#102697,.T.); +#102724 = PLANE('',#102725); +#102725 = AXIS2_PLACEMENT_3D('',#102726,#102727,#102728); +#102726 = CARTESIAN_POINT('',(-1.207744366167,1.321850330564,3.251)); +#102727 = DIRECTION('',(-7.474873201048E-15,1.,0.)); +#102728 = DIRECTION('',(-1.,-7.474873201048E-15,0.)); +#102729 = ADVANCED_FACE('',(#102730),#102736,.F.); +#102730 = FACE_BOUND('',#102731,.T.); +#102731 = EDGE_LOOP('',(#102732,#102733,#102734,#102735)); +#102732 = ORIENTED_EDGE('',*,*,#102490,.T.); +#102733 = ORIENTED_EDGE('',*,*,#102618,.F.); +#102734 = ORIENTED_EDGE('',*,*,#102404,.F.); +#102735 = ORIENTED_EDGE('',*,*,#102717,.T.); +#102736 = PLANE('',#102737); +#102737 = AXIS2_PLACEMENT_3D('',#102738,#102739,#102740); +#102738 = CARTESIAN_POINT('',(-1.207744366167,1.626915303211,3.251)); +#102739 = DIRECTION('',(-1.,-7.108008258556E-15,0.)); +#102740 = DIRECTION('',(7.108008258556E-15,-1.,0.)); +#102741 = ADVANCED_FACE('',(#102742),#102758,.T.); +#102742 = FACE_BOUND('',#102743,.T.); +#102743 = EDGE_LOOP('',(#102744,#102745,#102751,#102752)); +#102744 = ORIENTED_EDGE('',*,*,#102542,.F.); +#102745 = ORIENTED_EDGE('',*,*,#102746,.F.); +#102746 = EDGE_CURVE('',#102423,#102543,#102747,.T.); +#102747 = LINE('',#102748,#102749); +#102748 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102749 = VECTOR('',#102750,1.); +#102750 = DIRECTION('',(-0.,-0.,-1.)); +#102751 = ORIENTED_EDGE('',*,*,#102422,.T.); +#102752 = ORIENTED_EDGE('',*,*,#102753,.T.); +#102753 = EDGE_CURVE('',#102413,#102545,#102754,.T.); +#102754 = LINE('',#102755,#102756); +#102755 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.251)); +#102756 = VECTOR('',#102757,1.); +#102757 = DIRECTION('',(-0.,-0.,-1.)); +#102758 = PLANE('',#102759); +#102759 = AXIS2_PLACEMENT_3D('',#102760,#102761,#102762); +#102760 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102761 = DIRECTION('',(-4.70499632957E-15,1.,0.)); +#102762 = DIRECTION('',(-1.,-4.70499632957E-15,0.)); +#102763 = ADVANCED_FACE('',(#102764),#102775,.T.); +#102764 = FACE_BOUND('',#102765,.T.); +#102765 = EDGE_LOOP('',(#102766,#102767,#102768,#102769)); +#102766 = ORIENTED_EDGE('',*,*,#102552,.F.); +#102767 = ORIENTED_EDGE('',*,*,#102753,.F.); +#102768 = ORIENTED_EDGE('',*,*,#102412,.T.); +#102769 = ORIENTED_EDGE('',*,*,#102770,.T.); +#102770 = EDGE_CURVE('',#102415,#102553,#102771,.T.); +#102771 = LINE('',#102772,#102773); +#102772 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.251)); +#102773 = VECTOR('',#102774,1.); +#102774 = DIRECTION('',(-0.,-0.,-1.)); +#102775 = PLANE('',#102776); +#102776 = AXIS2_PLACEMENT_3D('',#102777,#102778,#102779); +#102777 = CARTESIAN_POINT('',(-1.247125197246,1.35694216024,3.251)); +#102778 = DIRECTION('',(-1.,-7.375736951568E-15,0.)); +#102779 = DIRECTION('',(7.375736951568E-15,-1.,0.)); +#102780 = ADVANCED_FACE('',(#102781),#102792,.T.); +#102781 = FACE_BOUND('',#102782,.T.); +#102782 = EDGE_LOOP('',(#102783,#102784,#102785,#102786)); +#102783 = ORIENTED_EDGE('',*,*,#102560,.F.); +#102784 = ORIENTED_EDGE('',*,*,#102770,.F.); +#102785 = ORIENTED_EDGE('',*,*,#102466,.T.); +#102786 = ORIENTED_EDGE('',*,*,#102787,.T.); +#102787 = EDGE_CURVE('',#102458,#102561,#102788,.T.); +#102788 = LINE('',#102789,#102790); +#102789 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.251)); +#102790 = VECTOR('',#102791,1.); +#102791 = DIRECTION('',(-0.,-0.,-1.)); +#102792 = PLANE('',#102793); +#102793 = AXIS2_PLACEMENT_3D('',#102794,#102795,#102796); +#102794 = CARTESIAN_POINT('',(-1.247125197246,1.592135400911,3.251)); +#102795 = DIRECTION('',(9.791031094293E-15,-1.,0.)); +#102796 = DIRECTION('',(1.,9.791031094293E-15,0.)); +#102797 = ADVANCED_FACE('',(#102798),#102809,.T.); +#102798 = FACE_BOUND('',#102799,.T.); +#102799 = EDGE_LOOP('',(#102800,#102801,#102802,#102803)); +#102800 = ORIENTED_EDGE('',*,*,#102568,.F.); +#102801 = ORIENTED_EDGE('',*,*,#102787,.F.); +#102802 = ORIENTED_EDGE('',*,*,#102457,.T.); +#102803 = ORIENTED_EDGE('',*,*,#102804,.T.); +#102804 = EDGE_CURVE('',#102449,#102569,#102805,.T.); +#102805 = LINE('',#102806,#102807); +#102806 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102807 = VECTOR('',#102808,1.); +#102808 = DIRECTION('',(-0.,-0.,-1.)); +#102809 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102810,#102811) + ,(#102812,#102813) + ,(#102814,#102815) + ,(#102816,#102817 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102810 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.251)); +#102811 = CARTESIAN_POINT('',(-1.29141888448,1.592135400911,3.25)); +#102812 = CARTESIAN_POINT('',(-1.330175860811,1.592135400911,3.251)); +#102813 = CARTESIAN_POINT('',(-1.330175860811,1.592135400911,3.25)); +#102814 = CARTESIAN_POINT('',(-1.360432816176,1.581529870166,3.251)); +#102815 = CARTESIAN_POINT('',(-1.360432816176,1.581529870166,3.25)); +#102816 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102817 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.25)); +#102818 = ADVANCED_FACE('',(#102819),#102830,.T.); +#102819 = FACE_BOUND('',#102820,.T.); +#102820 = EDGE_LOOP('',(#102821,#102822,#102823,#102824)); +#102821 = ORIENTED_EDGE('',*,*,#102577,.F.); +#102822 = ORIENTED_EDGE('',*,*,#102804,.F.); +#102823 = ORIENTED_EDGE('',*,*,#102448,.T.); +#102824 = ORIENTED_EDGE('',*,*,#102825,.T.); +#102825 = EDGE_CURVE('',#102440,#102578,#102826,.T.); +#102826 = LINE('',#102827,#102828); +#102827 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102828 = VECTOR('',#102829,1.); +#102829 = DIRECTION('',(-0.,-0.,-1.)); +#102830 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102831,#102832) + ,(#102833,#102834) + ,(#102835,#102836) + ,(#102837,#102838 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102831 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.251)); +#102832 = CARTESIAN_POINT('',(-1.382111768732,1.560318808672,3.25)); +#102833 = CARTESIAN_POINT('',(-1.403868703131,1.539263710866,3.251)); +#102834 = CARTESIAN_POINT('',(-1.403868703131,1.539263710866,3.25)); +#102835 = CARTESIAN_POINT('',(-1.414708179407,1.509630610251,3.251)); +#102836 = CARTESIAN_POINT('',(-1.414708179407,1.509630610251,3.25)); +#102837 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102838 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.25)); +#102839 = ADVANCED_FACE('',(#102840),#102851,.T.); +#102840 = FACE_BOUND('',#102841,.T.); +#102841 = EDGE_LOOP('',(#102842,#102843,#102844,#102845)); +#102842 = ORIENTED_EDGE('',*,*,#102586,.F.); +#102843 = ORIENTED_EDGE('',*,*,#102825,.F.); +#102844 = ORIENTED_EDGE('',*,*,#102439,.T.); +#102845 = ORIENTED_EDGE('',*,*,#102846,.T.); +#102846 = EDGE_CURVE('',#102431,#102587,#102847,.T.); +#102847 = LINE('',#102848,#102849); +#102848 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102849 = VECTOR('',#102850,1.); +#102850 = DIRECTION('',(-0.,-0.,-1.)); +#102851 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102852,#102853) + ,(#102854,#102855) + ,(#102856,#102857) + ,(#102858,#102859 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102852 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.251)); +#102853 = CARTESIAN_POINT('',(-1.414708179407,1.471575470514,3.25)); +#102854 = CARTESIAN_POINT('',(-1.414708179407,1.433520330776,3.251)); +#102855 = CARTESIAN_POINT('',(-1.414708179407,1.433520330776,3.25)); +#102856 = CARTESIAN_POINT('',(-1.403556775754,1.404823012288,3.251)); +#102857 = CARTESIAN_POINT('',(-1.403556775754,1.404823012288,3.25)); +#102858 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102859 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.25)); +#102860 = ADVANCED_FACE('',(#102861),#102867,.T.); +#102861 = FACE_BOUND('',#102862,.T.); +#102862 = EDGE_LOOP('',(#102863,#102864,#102865,#102866)); +#102863 = ORIENTED_EDGE('',*,*,#102595,.F.); +#102864 = ORIENTED_EDGE('',*,*,#102846,.F.); +#102865 = ORIENTED_EDGE('',*,*,#102430,.T.); +#102866 = ORIENTED_EDGE('',*,*,#102746,.T.); +#102867 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#102868,#102869) + ,(#102870,#102871) + ,(#102872,#102873) + ,(#102874,#102875 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#102868 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.251)); +#102869 = CARTESIAN_POINT('',(-1.38125396845,1.385639478731,3.25)); +#102870 = CARTESIAN_POINT('',(-1.358951161145,1.366455945176,3.251)); +#102871 = CARTESIAN_POINT('',(-1.358951161145,1.366455945176,3.25)); +#102872 = CARTESIAN_POINT('',(-1.329552006062,1.35694216024,3.251)); +#102873 = CARTESIAN_POINT('',(-1.329552006062,1.35694216024,3.25)); +#102874 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.251)); +#102875 = CARTESIAN_POINT('',(-1.293212466886,1.35694216024,3.25)); +#102876 = MANIFOLD_SOLID_BREP('',#102877); +#102877 = CLOSED_SHELL('',(#102878,#103002,#103126,#103148,#103165, + #103182,#103199,#103216,#103233,#103250,#103262,#103284,#103301, + #103322,#103339,#103360)); +#102878 = ADVANCED_FACE('',(#102879,#102945),#102997,.F.); +#102879 = FACE_BOUND('',#102880,.T.); +#102880 = EDGE_LOOP('',(#102881,#102891,#102899,#102907,#102915,#102923, + #102931,#102939)); +#102881 = ORIENTED_EDGE('',*,*,#102882,.T.); +#102882 = EDGE_CURVE('',#102883,#102885,#102887,.T.); +#102883 = VERTEX_POINT('',#102884); +#102884 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.251)); +#102885 = VERTEX_POINT('',#102886); +#102886 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.251)); +#102887 = LINE('',#102888,#102889); +#102888 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.251)); +#102889 = VECTOR('',#102890,1.); +#102890 = DIRECTION('',(0.355935724364,-0.934510438744,-0.)); +#102891 = ORIENTED_EDGE('',*,*,#102892,.T.); +#102892 = EDGE_CURVE('',#102885,#102893,#102895,.T.); +#102893 = VERTEX_POINT('',#102894); +#102894 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.251)); +#102895 = LINE('',#102896,#102897); +#102896 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.251)); +#102897 = VECTOR('',#102898,1.); +#102898 = DIRECTION('',(1.,1.029871418747E-14,-0.)); +#102899 = ORIENTED_EDGE('',*,*,#102900,.T.); +#102900 = EDGE_CURVE('',#102893,#102901,#102903,.T.); +#102901 = VERTEX_POINT('',#102902); +#102902 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.251)); +#102903 = LINE('',#102904,#102905); +#102904 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.251)); +#102905 = VECTOR('',#102906,1.); +#102906 = DIRECTION('',(0.35593572437,0.934510438742,-0.)); +#102907 = ORIENTED_EDGE('',*,*,#102908,.T.); +#102908 = EDGE_CURVE('',#102901,#102909,#102911,.T.); +#102909 = VERTEX_POINT('',#102910); +#102910 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.251)); +#102911 = LINE('',#102912,#102913); +#102912 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.251)); +#102913 = VECTOR('',#102914,1.); +#102914 = DIRECTION('',(-1.,-4.983248800579E-15,-0.)); +#102915 = ORIENTED_EDGE('',*,*,#102916,.T.); +#102916 = EDGE_CURVE('',#102909,#102917,#102919,.T.); +#102917 = VERTEX_POINT('',#102918); +#102918 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.251)); +#102919 = LINE('',#102920,#102921); +#102920 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.251)); +#102921 = VECTOR('',#102922,1.); +#102922 = DIRECTION('',(-0.331528418358,-0.94344523308,-0.)); +#102923 = ORIENTED_EDGE('',*,*,#102924,.T.); +#102924 = EDGE_CURVE('',#102917,#102925,#102927,.T.); +#102925 = VERTEX_POINT('',#102926); +#102926 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.251)); +#102927 = LINE('',#102928,#102929); +#102928 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.251)); +#102929 = VECTOR('',#102930,1.); +#102930 = DIRECTION('',(-1.,-6.82787680964E-15,-0.)); +#102931 = ORIENTED_EDGE('',*,*,#102932,.T.); +#102932 = EDGE_CURVE('',#102925,#102933,#102935,.T.); +#102933 = VERTEX_POINT('',#102934); +#102934 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.251)); +#102935 = LINE('',#102936,#102937); +#102936 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.251)); +#102937 = VECTOR('',#102938,1.); +#102938 = DIRECTION('',(-0.349395479497,0.936975345944,-0.)); +#102939 = ORIENTED_EDGE('',*,*,#102940,.T.); +#102940 = EDGE_CURVE('',#102933,#102883,#102941,.T.); +#102941 = LINE('',#102942,#102943); +#102942 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.251)); +#102943 = VECTOR('',#102944,1.); +#102944 = DIRECTION('',(-1.,-9.966497601635E-15,-0.)); +#102945 = FACE_BOUND('',#102946,.T.); +#102946 = EDGE_LOOP('',(#102947,#102957,#102965,#102974,#102982,#102991) + ); +#102947 = ORIENTED_EDGE('',*,*,#102948,.F.); +#102948 = EDGE_CURVE('',#102949,#102951,#102953,.T.); +#102949 = VERTEX_POINT('',#102950); +#102950 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.251)); +#102951 = VERTEX_POINT('',#102952); +#102952 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.251)); +#102953 = LINE('',#102954,#102955); +#102954 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.251)); +#102955 = VECTOR('',#102956,1.); +#102956 = DIRECTION('',(-1.,-6.353357572162E-15,0.)); +#102957 = ORIENTED_EDGE('',*,*,#102958,.F.); +#102958 = EDGE_CURVE('',#102959,#102949,#102961,.T.); +#102959 = VERTEX_POINT('',#102960); +#102960 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#102961 = LINE('',#102962,#102963); +#102962 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#102963 = VECTOR('',#102964,1.); +#102964 = DIRECTION('',(0.338535034296,0.940953787683,0.)); +#102965 = ORIENTED_EDGE('',*,*,#102966,.F.); +#102966 = EDGE_CURVE('',#102967,#102959,#102969,.T.); +#102967 = VERTEX_POINT('',#102968); +#102968 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.251)); +#102969 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102970,#102971,#102972, + #102973),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#102970 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.251)); +#102971 = CARTESIAN_POINT('',(-1.607479297092,1.370043109987,3.251)); +#102972 = CARTESIAN_POINT('',(-1.605841678376,1.37721743961,3.251)); +#102973 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#102974 = ORIENTED_EDGE('',*,*,#102975,.F.); +#102975 = EDGE_CURVE('',#102976,#102967,#102978,.T.); +#102976 = VERTEX_POINT('',#102977); +#102977 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#102978 = LINE('',#102979,#102980); +#102979 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#102980 = VECTOR('',#102981,1.); +#102981 = DIRECTION('',(1.,2.317210689773E-13,0.)); +#102982 = ORIENTED_EDGE('',*,*,#102983,.F.); +#102983 = EDGE_CURVE('',#102984,#102976,#102986,.T.); +#102984 = VERTEX_POINT('',#102985); +#102985 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.251)); +#102986 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#102987,#102988,#102989, + #102990),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#102987 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.251)); +#102988 = CARTESIAN_POINT('',(-1.613171971686,1.377997258046,3.251)); +#102989 = CARTESIAN_POINT('',(-1.611612334809,1.370978892111,3.251)); +#102990 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#102991 = ORIENTED_EDGE('',*,*,#102992,.F.); +#102992 = EDGE_CURVE('',#102951,#102984,#102993,.T.); +#102993 = LINE('',#102994,#102995); +#102994 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.251)); +#102995 = VECTOR('',#102996,1.); +#102996 = DIRECTION('',(0.34160383069,-0.939844041774,0.)); +#102997 = PLANE('',#102998); +#102998 = AXIS2_PLACEMENT_3D('',#102999,#103000,#103001); +#102999 = CARTESIAN_POINT('',(0.,0.,3.251)); +#103000 = DIRECTION('',(0.,0.,-1.)); +#103001 = DIRECTION('',(-1.,0.,-0.)); +#103002 = ADVANCED_FACE('',(#103003,#103069),#103121,.T.); +#103003 = FACE_BOUND('',#103004,.T.); +#103004 = EDGE_LOOP('',(#103005,#103015,#103023,#103031,#103039,#103047, + #103055,#103063)); +#103005 = ORIENTED_EDGE('',*,*,#103006,.F.); +#103006 = EDGE_CURVE('',#103007,#103009,#103011,.T.); +#103007 = VERTEX_POINT('',#103008); +#103008 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.25)); +#103009 = VERTEX_POINT('',#103010); +#103010 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.25)); +#103011 = LINE('',#103012,#103013); +#103012 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.25)); +#103013 = VECTOR('',#103014,1.); +#103014 = DIRECTION('',(0.355935724364,-0.934510438744,-0.)); +#103015 = ORIENTED_EDGE('',*,*,#103016,.F.); +#103016 = EDGE_CURVE('',#103017,#103007,#103019,.T.); +#103017 = VERTEX_POINT('',#103018); +#103018 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.25)); +#103019 = LINE('',#103020,#103021); +#103020 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.25)); +#103021 = VECTOR('',#103022,1.); +#103022 = DIRECTION('',(-1.,-9.966497601635E-15,-0.)); +#103023 = ORIENTED_EDGE('',*,*,#103024,.F.); +#103024 = EDGE_CURVE('',#103025,#103017,#103027,.T.); +#103025 = VERTEX_POINT('',#103026); +#103026 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.25)); +#103027 = LINE('',#103028,#103029); +#103028 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.25)); +#103029 = VECTOR('',#103030,1.); +#103030 = DIRECTION('',(-0.349395479497,0.936975345944,-0.)); +#103031 = ORIENTED_EDGE('',*,*,#103032,.F.); +#103032 = EDGE_CURVE('',#103033,#103025,#103035,.T.); +#103033 = VERTEX_POINT('',#103034); +#103034 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.25)); +#103035 = LINE('',#103036,#103037); +#103036 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.25)); +#103037 = VECTOR('',#103038,1.); +#103038 = DIRECTION('',(-1.,-6.82787680964E-15,-0.)); +#103039 = ORIENTED_EDGE('',*,*,#103040,.F.); +#103040 = EDGE_CURVE('',#103041,#103033,#103043,.T.); +#103041 = VERTEX_POINT('',#103042); +#103042 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.25)); +#103043 = LINE('',#103044,#103045); +#103044 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.25)); +#103045 = VECTOR('',#103046,1.); +#103046 = DIRECTION('',(-0.331528418358,-0.94344523308,-0.)); +#103047 = ORIENTED_EDGE('',*,*,#103048,.F.); +#103048 = EDGE_CURVE('',#103049,#103041,#103051,.T.); +#103049 = VERTEX_POINT('',#103050); +#103050 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.25)); +#103051 = LINE('',#103052,#103053); +#103052 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.25)); +#103053 = VECTOR('',#103054,1.); +#103054 = DIRECTION('',(-1.,-4.983248800579E-15,-0.)); +#103055 = ORIENTED_EDGE('',*,*,#103056,.F.); +#103056 = EDGE_CURVE('',#103057,#103049,#103059,.T.); +#103057 = VERTEX_POINT('',#103058); +#103058 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.25)); +#103059 = LINE('',#103060,#103061); +#103060 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.25)); +#103061 = VECTOR('',#103062,1.); +#103062 = DIRECTION('',(0.35593572437,0.934510438742,-0.)); +#103063 = ORIENTED_EDGE('',*,*,#103064,.F.); +#103064 = EDGE_CURVE('',#103009,#103057,#103065,.T.); +#103065 = LINE('',#103066,#103067); +#103066 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.25)); +#103067 = VECTOR('',#103068,1.); +#103068 = DIRECTION('',(1.,1.029871418747E-14,-0.)); +#103069 = FACE_BOUND('',#103070,.T.); +#103070 = EDGE_LOOP('',(#103071,#103081,#103089,#103097,#103106,#103114) + ); +#103071 = ORIENTED_EDGE('',*,*,#103072,.T.); +#103072 = EDGE_CURVE('',#103073,#103075,#103077,.T.); +#103073 = VERTEX_POINT('',#103074); +#103074 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.25)); +#103075 = VERTEX_POINT('',#103076); +#103076 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.25)); +#103077 = LINE('',#103078,#103079); +#103078 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.25)); +#103079 = VECTOR('',#103080,1.); +#103080 = DIRECTION('',(0.338535034296,0.940953787683,0.)); +#103081 = ORIENTED_EDGE('',*,*,#103082,.T.); +#103082 = EDGE_CURVE('',#103075,#103083,#103085,.T.); +#103083 = VERTEX_POINT('',#103084); +#103084 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.25)); +#103085 = LINE('',#103086,#103087); +#103086 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.25)); +#103087 = VECTOR('',#103088,1.); +#103088 = DIRECTION('',(-1.,-6.353357572162E-15,0.)); +#103089 = ORIENTED_EDGE('',*,*,#103090,.T.); +#103090 = EDGE_CURVE('',#103083,#103091,#103093,.T.); +#103091 = VERTEX_POINT('',#103092); +#103092 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.25)); +#103093 = LINE('',#103094,#103095); +#103094 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.25)); +#103095 = VECTOR('',#103096,1.); +#103096 = DIRECTION('',(0.34160383069,-0.939844041774,0.)); +#103097 = ORIENTED_EDGE('',*,*,#103098,.T.); +#103098 = EDGE_CURVE('',#103091,#103099,#103101,.T.); +#103099 = VERTEX_POINT('',#103100); +#103100 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.25)); +#103101 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103102,#103103,#103104, + #103105),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#103102 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.25)); +#103103 = CARTESIAN_POINT('',(-1.613171971686,1.377997258046,3.25)); +#103104 = CARTESIAN_POINT('',(-1.611612334809,1.370978892111,3.25)); +#103105 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.25)); +#103106 = ORIENTED_EDGE('',*,*,#103107,.T.); +#103107 = EDGE_CURVE('',#103099,#103108,#103110,.T.); +#103108 = VERTEX_POINT('',#103109); +#103109 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.25)); +#103110 = LINE('',#103111,#103112); +#103111 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.25)); +#103112 = VECTOR('',#103113,1.); +#103113 = DIRECTION('',(1.,2.317210689773E-13,0.)); +#103114 = ORIENTED_EDGE('',*,*,#103115,.T.); +#103115 = EDGE_CURVE('',#103108,#103073,#103116,.T.); +#103116 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103117,#103118,#103119, + #103120),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#103117 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.25)); +#103118 = CARTESIAN_POINT('',(-1.607479297092,1.370043109987,3.25)); +#103119 = CARTESIAN_POINT('',(-1.605841678376,1.37721743961,3.25)); +#103120 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.25)); +#103121 = PLANE('',#103122); +#103122 = AXIS2_PLACEMENT_3D('',#103123,#103124,#103125); +#103123 = CARTESIAN_POINT('',(0.,0.,3.25)); +#103124 = DIRECTION('',(0.,0.,-1.)); +#103125 = DIRECTION('',(-1.,0.,-0.)); +#103126 = ADVANCED_FACE('',(#103127),#103143,.F.); +#103127 = FACE_BOUND('',#103128,.T.); +#103128 = EDGE_LOOP('',(#103129,#103130,#103136,#103137)); +#103129 = ORIENTED_EDGE('',*,*,#103006,.T.); +#103130 = ORIENTED_EDGE('',*,*,#103131,.F.); +#103131 = EDGE_CURVE('',#102885,#103009,#103132,.T.); +#103132 = LINE('',#103133,#103134); +#103133 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.251)); +#103134 = VECTOR('',#103135,1.); +#103135 = DIRECTION('',(-0.,-0.,-1.)); +#103136 = ORIENTED_EDGE('',*,*,#102882,.F.); +#103137 = ORIENTED_EDGE('',*,*,#103138,.T.); +#103138 = EDGE_CURVE('',#102883,#103007,#103139,.T.); +#103139 = LINE('',#103140,#103141); +#103140 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.251)); +#103141 = VECTOR('',#103142,1.); +#103142 = DIRECTION('',(-0.,-0.,-1.)); +#103143 = PLANE('',#103144); +#103144 = AXIS2_PLACEMENT_3D('',#103145,#103146,#103147); +#103145 = CARTESIAN_POINT('',(-1.631341741274,1.321850330564,3.251)); +#103146 = DIRECTION('',(0.934510438744,0.355935724364,-0.)); +#103147 = DIRECTION('',(-0.355935724364,0.934510438744,0.)); +#103148 = ADVANCED_FACE('',(#103149),#103160,.F.); +#103149 = FACE_BOUND('',#103150,.T.); +#103150 = EDGE_LOOP('',(#103151,#103152,#103158,#103159)); +#103151 = ORIENTED_EDGE('',*,*,#103064,.T.); +#103152 = ORIENTED_EDGE('',*,*,#103153,.F.); +#103153 = EDGE_CURVE('',#102893,#103057,#103154,.T.); +#103154 = LINE('',#103155,#103156); +#103155 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.251)); +#103156 = VECTOR('',#103157,1.); +#103157 = DIRECTION('',(-0.,-0.,-1.)); +#103158 = ORIENTED_EDGE('',*,*,#102892,.F.); +#103159 = ORIENTED_EDGE('',*,*,#103131,.T.); +#103160 = PLANE('',#103161); +#103161 = AXIS2_PLACEMENT_3D('',#103162,#103163,#103164); +#103162 = CARTESIAN_POINT('',(-1.589231545661,1.321850330564,3.251)); +#103163 = DIRECTION('',(-1.029871418747E-14,1.,0.)); +#103164 = DIRECTION('',(-1.,-1.029871418747E-14,0.)); +#103165 = ADVANCED_FACE('',(#103166),#103177,.F.); +#103166 = FACE_BOUND('',#103167,.T.); +#103167 = EDGE_LOOP('',(#103168,#103169,#103175,#103176)); +#103168 = ORIENTED_EDGE('',*,*,#103056,.T.); +#103169 = ORIENTED_EDGE('',*,*,#103170,.F.); +#103170 = EDGE_CURVE('',#102901,#103049,#103171,.T.); +#103171 = LINE('',#103172,#103173); +#103172 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.251)); +#103173 = VECTOR('',#103174,1.); +#103174 = DIRECTION('',(-0.,-0.,-1.)); +#103175 = ORIENTED_EDGE('',*,*,#102900,.F.); +#103176 = ORIENTED_EDGE('',*,*,#103153,.T.); +#103177 = PLANE('',#103178); +#103178 = AXIS2_PLACEMENT_3D('',#103179,#103180,#103181); +#103179 = CARTESIAN_POINT('',(-1.473038598512,1.626915303211,3.251)); +#103180 = DIRECTION('',(-0.934510438742,0.35593572437,0.)); +#103181 = DIRECTION('',(-0.35593572437,-0.934510438742,0.)); +#103182 = ADVANCED_FACE('',(#103183),#103194,.F.); +#103183 = FACE_BOUND('',#103184,.T.); +#103184 = EDGE_LOOP('',(#103185,#103186,#103192,#103193)); +#103185 = ORIENTED_EDGE('',*,*,#103048,.T.); +#103186 = ORIENTED_EDGE('',*,*,#103187,.F.); +#103187 = EDGE_CURVE('',#102909,#103041,#103188,.T.); +#103188 = LINE('',#103189,#103190); +#103189 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.251)); +#103190 = VECTOR('',#103191,1.); +#103191 = DIRECTION('',(-0.,-0.,-1.)); +#103192 = ORIENTED_EDGE('',*,*,#102908,.F.); +#103193 = ORIENTED_EDGE('',*,*,#103170,.T.); +#103194 = PLANE('',#103195); +#103195 = AXIS2_PLACEMENT_3D('',#103196,#103197,#103198); +#103196 = CARTESIAN_POINT('',(-1.51655246731,1.626915303211,3.251)); +#103197 = DIRECTION('',(4.983248800579E-15,-1.,0.)); +#103198 = DIRECTION('',(1.,4.983248800579E-15,0.)); +#103199 = ADVANCED_FACE('',(#103200),#103211,.F.); +#103200 = FACE_BOUND('',#103201,.T.); +#103201 = EDGE_LOOP('',(#103202,#103203,#103209,#103210)); +#103202 = ORIENTED_EDGE('',*,*,#103040,.T.); +#103203 = ORIENTED_EDGE('',*,*,#103204,.F.); +#103204 = EDGE_CURVE('',#102917,#103033,#103205,.T.); +#103205 = LINE('',#103206,#103207); +#103206 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.251)); +#103207 = VECTOR('',#103208,1.); +#103208 = DIRECTION('',(-0.,-0.,-1.)); +#103209 = ORIENTED_EDGE('',*,*,#102916,.F.); +#103210 = ORIENTED_EDGE('',*,*,#103187,.T.); +#103211 = PLANE('',#103212); +#103212 = AXIS2_PLACEMENT_3D('',#103213,#103214,#103215); +#103213 = CARTESIAN_POINT('',(-1.54587364055,1.543474730429,3.251)); +#103214 = DIRECTION('',(0.94344523308,-0.331528418358,0.)); +#103215 = DIRECTION('',(0.331528418358,0.94344523308,0.)); +#103216 = ADVANCED_FACE('',(#103217),#103228,.F.); +#103217 = FACE_BOUND('',#103218,.T.); +#103218 = EDGE_LOOP('',(#103219,#103220,#103226,#103227)); +#103219 = ORIENTED_EDGE('',*,*,#103032,.T.); +#103220 = ORIENTED_EDGE('',*,*,#103221,.F.); +#103221 = EDGE_CURVE('',#102925,#103025,#103222,.T.); +#103222 = LINE('',#103223,#103224); +#103223 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.251)); +#103224 = VECTOR('',#103225,1.); +#103225 = DIRECTION('',(-0.,-0.,-1.)); +#103226 = ORIENTED_EDGE('',*,*,#102924,.F.); +#103227 = ORIENTED_EDGE('',*,*,#103204,.T.); +#103228 = PLANE('',#103229); +#103229 = AXIS2_PLACEMENT_3D('',#103230,#103231,#103232); +#103230 = CARTESIAN_POINT('',(-1.672906063977,1.543474730428,3.251)); +#103231 = DIRECTION('',(6.82787680964E-15,-1.,0.)); +#103232 = DIRECTION('',(1.,6.82787680964E-15,0.)); +#103233 = ADVANCED_FACE('',(#103234),#103245,.F.); +#103234 = FACE_BOUND('',#103235,.T.); +#103235 = EDGE_LOOP('',(#103236,#103237,#103243,#103244)); +#103236 = ORIENTED_EDGE('',*,*,#103024,.T.); +#103237 = ORIENTED_EDGE('',*,*,#103238,.F.); +#103238 = EDGE_CURVE('',#102933,#103017,#103239,.T.); +#103239 = LINE('',#103240,#103241); +#103240 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.251)); +#103241 = VECTOR('',#103242,1.); +#103242 = DIRECTION('',(-0.,-0.,-1.)); +#103243 = ORIENTED_EDGE('',*,*,#102932,.F.); +#103244 = ORIENTED_EDGE('',*,*,#103221,.T.); +#103245 = PLANE('',#103246); +#103246 = AXIS2_PLACEMENT_3D('',#103247,#103248,#103249); +#103247 = CARTESIAN_POINT('',(-1.704020819625,1.626915303211,3.251)); +#103248 = DIRECTION('',(-0.936975345944,-0.349395479497,0.)); +#103249 = DIRECTION('',(0.349395479497,-0.936975345944,0.)); +#103250 = ADVANCED_FACE('',(#103251),#103257,.F.); +#103251 = FACE_BOUND('',#103252,.T.); +#103252 = EDGE_LOOP('',(#103253,#103254,#103255,#103256)); +#103253 = ORIENTED_EDGE('',*,*,#103016,.T.); +#103254 = ORIENTED_EDGE('',*,*,#103138,.F.); +#103255 = ORIENTED_EDGE('',*,*,#102940,.F.); +#103256 = ORIENTED_EDGE('',*,*,#103238,.T.); +#103257 = PLANE('',#103258); +#103258 = AXIS2_PLACEMENT_3D('',#103259,#103260,#103261); +#103259 = CARTESIAN_POINT('',(-1.747534688421,1.626915303211,3.251)); +#103260 = DIRECTION('',(9.966497601635E-15,-1.,0.)); +#103261 = DIRECTION('',(1.,9.966497601635E-15,0.)); +#103262 = ADVANCED_FACE('',(#103263),#103279,.T.); +#103263 = FACE_BOUND('',#103264,.T.); +#103264 = EDGE_LOOP('',(#103265,#103266,#103272,#103273)); +#103265 = ORIENTED_EDGE('',*,*,#103082,.F.); +#103266 = ORIENTED_EDGE('',*,*,#103267,.F.); +#103267 = EDGE_CURVE('',#102949,#103075,#103268,.T.); +#103268 = LINE('',#103269,#103270); +#103269 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.251)); +#103270 = VECTOR('',#103271,1.); +#103271 = DIRECTION('',(-0.,-0.,-1.)); +#103272 = ORIENTED_EDGE('',*,*,#102948,.T.); +#103273 = ORIENTED_EDGE('',*,*,#103274,.T.); +#103274 = EDGE_CURVE('',#102951,#103083,#103275,.T.); +#103275 = LINE('',#103276,#103277); +#103276 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.251)); +#103277 = VECTOR('',#103278,1.); +#103278 = DIRECTION('',(-0.,-0.,-1.)); +#103279 = PLANE('',#103280); +#103280 = AXIS2_PLACEMENT_3D('',#103281,#103282,#103283); +#103281 = CARTESIAN_POINT('',(-1.558350735548,1.509006755502,3.251)); +#103282 = DIRECTION('',(6.353357572162E-15,-1.,0.)); +#103283 = DIRECTION('',(1.,6.353357572162E-15,0.)); +#103284 = ADVANCED_FACE('',(#103285),#103296,.T.); +#103285 = FACE_BOUND('',#103286,.T.); +#103286 = EDGE_LOOP('',(#103287,#103288,#103289,#103290)); +#103287 = ORIENTED_EDGE('',*,*,#103090,.F.); +#103288 = ORIENTED_EDGE('',*,*,#103274,.F.); +#103289 = ORIENTED_EDGE('',*,*,#102992,.T.); +#103290 = ORIENTED_EDGE('',*,*,#103291,.T.); +#103291 = EDGE_CURVE('',#102984,#103091,#103292,.T.); +#103292 = LINE('',#103293,#103294); +#103293 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.251)); +#103294 = VECTOR('',#103295,1.); +#103295 = DIRECTION('',(-0.,-0.,-1.)); +#103296 = PLANE('',#103297); +#103297 = AXIS2_PLACEMENT_3D('',#103298,#103299,#103300); +#103298 = CARTESIAN_POINT('',(-1.660740896357,1.509006755502,3.251)); +#103299 = DIRECTION('',(0.939844041774,0.34160383069,-0.)); +#103300 = DIRECTION('',(-0.34160383069,0.939844041774,0.)); +#103301 = ADVANCED_FACE('',(#103302),#103313,.T.); +#103302 = FACE_BOUND('',#103303,.T.); +#103303 = EDGE_LOOP('',(#103304,#103305,#103306,#103307)); +#103304 = ORIENTED_EDGE('',*,*,#103098,.F.); +#103305 = ORIENTED_EDGE('',*,*,#103291,.F.); +#103306 = ORIENTED_EDGE('',*,*,#102983,.T.); +#103307 = ORIENTED_EDGE('',*,*,#103308,.T.); +#103308 = EDGE_CURVE('',#102976,#103099,#103309,.T.); +#103309 = LINE('',#103310,#103311); +#103310 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#103311 = VECTOR('',#103312,1.); +#103312 = DIRECTION('',(-0.,-0.,-1.)); +#103313 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#103314,#103315) + ,(#103316,#103317) + ,(#103318,#103319) + ,(#103320,#103321 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#103314 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.251)); +#103315 = CARTESIAN_POINT('',(-1.614653626715,1.382208277606,3.25)); +#103316 = CARTESIAN_POINT('',(-1.613171971686,1.377997258046,3.251)); +#103317 = CARTESIAN_POINT('',(-1.613171971686,1.377997258046,3.25)); +#103318 = CARTESIAN_POINT('',(-1.611612334809,1.370978892111,3.251)); +#103319 = CARTESIAN_POINT('',(-1.611612334809,1.370978892111,3.25)); +#103320 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#103321 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.25)); +#103322 = ADVANCED_FACE('',(#103323),#103334,.T.); +#103323 = FACE_BOUND('',#103324,.T.); +#103324 = EDGE_LOOP('',(#103325,#103326,#103327,#103328)); +#103325 = ORIENTED_EDGE('',*,*,#103107,.F.); +#103326 = ORIENTED_EDGE('',*,*,#103308,.F.); +#103327 = ORIENTED_EDGE('',*,*,#102975,.T.); +#103328 = ORIENTED_EDGE('',*,*,#103329,.T.); +#103329 = EDGE_CURVE('',#102967,#103108,#103330,.T.); +#103330 = LINE('',#103331,#103332); +#103331 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.251)); +#103332 = VECTOR('',#103333,1.); +#103333 = DIRECTION('',(-0.,-0.,-1.)); +#103334 = PLANE('',#103335); +#103335 = AXIS2_PLACEMENT_3D('',#103336,#103337,#103338); +#103336 = CARTESIAN_POINT('',(-1.609896734249,1.360841252428,3.251)); +#103337 = DIRECTION('',(-2.317210689773E-13,1.,0.)); +#103338 = DIRECTION('',(-1.,-2.317210689773E-13,0.)); +#103339 = ADVANCED_FACE('',(#103340),#103351,.T.); +#103340 = FACE_BOUND('',#103341,.T.); +#103341 = EDGE_LOOP('',(#103342,#103343,#103344,#103345)); +#103342 = ORIENTED_EDGE('',*,*,#103115,.F.); +#103343 = ORIENTED_EDGE('',*,*,#103329,.F.); +#103344 = ORIENTED_EDGE('',*,*,#102966,.T.); +#103345 = ORIENTED_EDGE('',*,*,#103346,.T.); +#103346 = EDGE_CURVE('',#102959,#103073,#103347,.T.); +#103347 = LINE('',#103348,#103349); +#103348 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#103349 = VECTOR('',#103350,1.); +#103350 = DIRECTION('',(-0.,-0.,-1.)); +#103351 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#103352,#103353) + ,(#103354,#103355) + ,(#103356,#103357) + ,(#103358,#103359 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#103352 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.251)); +#103353 = CARTESIAN_POINT('',(-1.608960952124,1.360841252428,3.25)); +#103354 = CARTESIAN_POINT('',(-1.607479297092,1.370043109987,3.251)); +#103355 = CARTESIAN_POINT('',(-1.607479297092,1.370043109987,3.25)); +#103356 = CARTESIAN_POINT('',(-1.605841678376,1.37721743961,3.251)); +#103357 = CARTESIAN_POINT('',(-1.605841678376,1.37721743961,3.25)); +#103358 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#103359 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.25)); +#103360 = ADVANCED_FACE('',(#103361),#103367,.T.); +#103361 = FACE_BOUND('',#103362,.T.); +#103362 = EDGE_LOOP('',(#103363,#103364,#103365,#103366)); +#103363 = ORIENTED_EDGE('',*,*,#103072,.F.); +#103364 = ORIENTED_EDGE('',*,*,#103346,.F.); +#103365 = ORIENTED_EDGE('',*,*,#102958,.T.); +#103366 = ORIENTED_EDGE('',*,*,#103267,.T.); +#103367 = PLANE('',#103368); +#103368 = AXIS2_PLACEMENT_3D('',#103369,#103370,#103371); +#103369 = CARTESIAN_POINT('',(-1.603970114125,1.382208277606,3.251)); +#103370 = DIRECTION('',(-0.940953787683,0.338535034296,0.)); +#103371 = DIRECTION('',(-0.338535034296,-0.940953787683,0.)); +#103372 = MANIFOLD_SOLID_BREP('',#103373); +#103373 = CLOSED_SHELL('',(#103374,#103699,#104024,#104050,#104071, + #104092,#104113,#104134,#104155,#104176,#104197,#104218,#104239, + #104260,#104281,#104298,#104315,#104332,#104349,#104370,#104391, + #104412,#104433,#104454,#104475,#104496,#104513,#104534,#104555, + #104572,#104593,#104614,#104635,#104652,#104673,#104689,#104721)); +#103374 = ADVANCED_FACE('',(#103375,#103669),#103694,.F.); +#103375 = FACE_BOUND('',#103376,.T.); +#103376 = EDGE_LOOP('',(#103377,#103388,#103397,#103406,#103415,#103424, + #103433,#103442,#103451,#103460,#103469,#103478,#103487,#103496, + #103504,#103512,#103520,#103529,#103538,#103547,#103556,#103565, + #103574,#103583,#103592,#103601,#103610,#103618,#103627,#103636, + #103645,#103653,#103662)); +#103377 = ORIENTED_EDGE('',*,*,#103378,.T.); +#103378 = EDGE_CURVE('',#103379,#103381,#103383,.T.); +#103379 = VERTEX_POINT('',#103380); +#103380 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#103381 = VERTEX_POINT('',#103382); +#103382 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#103383 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103384,#103385,#103386, + #103387),.UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.), + .PIECEWISE_BEZIER_KNOTS.); +#103384 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#103385 = CARTESIAN_POINT('',(0.110824553548,1.194177249942,3.251)); +#103386 = CARTESIAN_POINT('',(0.199752814182,1.07922124506,3.251)); +#103387 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#103388 = ORIENTED_EDGE('',*,*,#103389,.T.); +#103389 = EDGE_CURVE('',#103381,#103390,#103392,.T.); +#103390 = VERTEX_POINT('',#103391); +#103391 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#103392 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103393,#103394,#103395, + #103396),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#103393 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#103394 = CARTESIAN_POINT('',(0.347243406292,0.975110185327,3.251)); +#103395 = CARTESIAN_POINT('',(0.38845407375,0.916547709055,3.251)); +#103396 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#103397 = ORIENTED_EDGE('',*,*,#103398,.T.); +#103398 = EDGE_CURVE('',#103390,#103399,#103401,.T.); +#103399 = VERTEX_POINT('',#103400); +#103400 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#103401 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103402,#103403,#103404, + #103405),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#103402 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#103403 = CARTESIAN_POINT('',(0.522930897161,0.797253754554,3.251)); +#103404 = CARTESIAN_POINT('',(0.627041956895,0.756043120711,3.251)); +#103405 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#103406 = ORIENTED_EDGE('',*,*,#103407,.T.); +#103407 = EDGE_CURVE('',#103399,#103408,#103410,.T.); +#103408 = VERTEX_POINT('',#103409); +#103409 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#103410 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103411,#103412,#103413, + #103414),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#103411 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#103412 = CARTESIAN_POINT('',(0.830926139671,0.756043120711,3.251)); +#103413 = CARTESIAN_POINT('',(0.919854358935,0.786408850775,3.251)); +#103414 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#103415 = ORIENTED_EDGE('',*,*,#103416,.T.); +#103416 = EDGE_CURVE('',#103408,#103417,#103419,.T.); +#103417 = VERTEX_POINT('',#103418); +#103418 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#103419 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103420,#103421,#103422, + #103423),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#103420 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#103421 = CARTESIAN_POINT('',(1.032641374789,0.866661147534,3.251)); +#103422 = CARTESIAN_POINT('',(1.063007097096,0.899195858871,3.251)); +#103423 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#103424 = ORIENTED_EDGE('',*,*,#103425,.T.); +#103425 = EDGE_CURVE('',#103417,#103426,#103428,.T.); +#103426 = VERTEX_POINT('',#103427); +#103427 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#103428 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103429,#103430,#103431, + #103432),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#103429 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#103430 = CARTESIAN_POINT('',(1.108555659874,0.933899538554,3.251)); +#103431 = CARTESIAN_POINT('',(1.123738541712,0.93173057021,3.251)); +#103432 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#103433 = ORIENTED_EDGE('',*,*,#103434,.T.); +#103434 = EDGE_CURVE('',#103426,#103435,#103437,.T.); +#103435 = VERTEX_POINT('',#103436); +#103436 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#103437 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103438,#103439,#103440, + #103441),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#103438 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#103439 = CARTESIAN_POINT('',(1.23435654785,0.93173057021,3.251)); +#103440 = CARTESIAN_POINT('',(1.32328474643,0.96860323892,3.251)); +#103441 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#103442 = ORIENTED_EDGE('',*,*,#103443,.T.); +#103443 = EDGE_CURVE('',#103435,#103444,#103446,.T.); +#103444 = VERTEX_POINT('',#103445); +#103445 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#103446 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103447,#103448,#103449, + #103450),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#103447 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#103448 = CARTESIAN_POINT('',(1.455592637695,1.100911052618,3.251)); +#103449 = CARTESIAN_POINT('',(1.492465311578,1.189839271884,3.251)); +#103450 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#103451 = ORIENTED_EDGE('',*,*,#103452,.T.); +#103452 = EDGE_CURVE('',#103444,#103453,#103455,.T.); +#103453 = VERTEX_POINT('',#103454); +#103454 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#103455 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103456,#103457,#103458, + #103459),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#103456 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#103457 = CARTESIAN_POINT('',(1.492465311578,1.369864658071,3.251)); +#103458 = CARTESIAN_POINT('',(1.459930600242,1.454454940646,3.251)); +#103459 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#103460 = ORIENTED_EDGE('',*,*,#103461,.T.); +#103461 = EDGE_CURVE('',#103453,#103462,#103464,.T.); +#103462 = VERTEX_POINT('',#103463); +#103463 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#103464 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103465,#103466,#103467, + #103468),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#103465 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#103466 = CARTESIAN_POINT('',(1.353650551478,1.571579851819,3.251)); +#103467 = CARTESIAN_POINT('',(1.295088054522,1.606283510815,3.251)); +#103468 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#103469 = ORIENTED_EDGE('',*,*,#103470,.T.); +#103470 = EDGE_CURVE('',#103462,#103471,#103473,.T.); +#103471 = VERTEX_POINT('',#103472); +#103472 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#103473 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103474,#103475,#103476, + #103477),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#103474 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#103475 = CARTESIAN_POINT('',(1.199652909538,1.71039457055,3.251)); +#103476 = CARTESIAN_POINT('',(1.117231657363,1.771126015165,3.251)); +#103477 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#103478 = ORIENTED_EDGE('',*,*,#103479,.T.); +#103479 = EDGE_CURVE('',#103471,#103480,#103482,.T.); +#103480 = VERTEX_POINT('',#103481); +#103481 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#103482 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103483,#103484,#103485, + #103486),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#103483 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#103484 = CARTESIAN_POINT('',(0.902502529437,1.771126015165,3.251)); +#103485 = CARTESIAN_POINT('',(0.804898395422,1.673521881152,3.251)); +#103486 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#103487 = ORIENTED_EDGE('',*,*,#103488,.T.); +#103488 = EDGE_CURVE('',#103480,#103489,#103491,.T.); +#103489 = VERTEX_POINT('',#103490); +#103490 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.251)); +#103491 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103492,#103493,#103494, + #103495),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#103492 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#103493 = CARTESIAN_POINT('',(0.804898395422,1.54772101386,3.251)); +#103494 = CARTESIAN_POINT('',(0.804898395422,1.541214088139,3.251)); +#103495 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.251)); +#103496 = ORIENTED_EDGE('',*,*,#103497,.T.); +#103497 = EDGE_CURVE('',#103489,#103498,#103500,.T.); +#103498 = VERTEX_POINT('',#103499); +#103499 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.251)); +#103500 = LINE('',#103501,#103502); +#103501 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.251)); +#103502 = VECTOR('',#103503,1.); +#103503 = DIRECTION('',(-0.884094950248,-0.467307306755,0.)); +#103504 = ORIENTED_EDGE('',*,*,#103505,.T.); +#103505 = EDGE_CURVE('',#103498,#103506,#103508,.T.); +#103506 = VERTEX_POINT('',#103507); +#103507 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.251)); +#103508 = LINE('',#103509,#103510); +#103509 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.251)); +#103510 = VECTOR('',#103511,1.); +#103511 = DIRECTION('',(0.50488304865,-0.863187758941,0.)); +#103512 = ORIENTED_EDGE('',*,*,#103513,.T.); +#103513 = EDGE_CURVE('',#103506,#103514,#103516,.T.); +#103514 = VERTEX_POINT('',#103515); +#103515 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.251)); +#103516 = LINE('',#103517,#103518); +#103517 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.251)); +#103518 = VECTOR('',#103519,1.); +#103519 = DIRECTION('',(0.886348842796,0.463018065387,0.)); +#103520 = ORIENTED_EDGE('',*,*,#103521,.T.); +#103521 = EDGE_CURVE('',#103514,#103522,#103524,.T.); +#103522 = VERTEX_POINT('',#103523); +#103523 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#103524 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103525,#103526,#103527, + #103528),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#103525 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.251)); +#103526 = CARTESIAN_POINT('',(0.898164510007,1.363357608241,3.251)); +#103527 = CARTESIAN_POINT('',(0.956727006963,1.335160874963,3.251)); +#103528 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#103529 = ORIENTED_EDGE('',*,*,#103530,.T.); +#103530 = EDGE_CURVE('',#103522,#103531,#103533,.T.); +#103531 = VERTEX_POINT('',#103532); +#103532 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#103533 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103534,#103535,#103536, + #103537),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#103534 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#103535 = CARTESIAN_POINT('',(1.115062626963,1.335160874963,3.251)); +#103536 = CARTESIAN_POINT('',(1.195314890107,1.395892319578,3.251)); +#103537 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#103538 = ORIENTED_EDGE('',*,*,#103539,.T.); +#103539 = EDGE_CURVE('',#103531,#103540,#103542,.T.); +#103540 = VERTEX_POINT('',#103541); +#103541 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#103542 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103543,#103544,#103545, + #103546),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#103543 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#103544 = CARTESIAN_POINT('',(1.301594938871,1.443609912757,3.251)); +#103545 = CARTESIAN_POINT('',(1.355819457768,1.367695586302,3.251)); +#103546 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#103547 = ORIENTED_EDGE('',*,*,#103548,.T.); +#103548 = EDGE_CURVE('',#103540,#103549,#103551,.T.); +#103549 = VERTEX_POINT('',#103550); +#103550 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#103551 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103552,#103553,#103554, + #103555),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#103552 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#103553 = CARTESIAN_POINT('',(1.355819457768,1.159473425464,3.251)); +#103554 = CARTESIAN_POINT('',(1.258215323754,1.061869291451,3.251)); +#103555 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#103556 = ORIENTED_EDGE('',*,*,#103557,.T.); +#103557 = EDGE_CURVE('',#103549,#103558,#103560,.T.); +#103558 = VERTEX_POINT('',#103559); +#103559 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#103560 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103561,#103562,#103563, + #103564),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#103561 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#103562 = CARTESIAN_POINT('',(1.097710756094,1.061869291451,3.251)); +#103563 = CARTESIAN_POINT('',(1.056500130006,1.074883184259,3.251)); +#103564 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#103565 = ORIENTED_EDGE('',*,*,#103566,.T.); +#103566 = EDGE_CURVE('',#103558,#103567,#103569,.T.); +#103567 = VERTEX_POINT('',#103568); +#103568 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#103569 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103570,#103571,#103572, + #103573),.UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.), + .PIECEWISE_BEZIER_KNOTS.); +#103570 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#103571 = CARTESIAN_POINT('',(0.982754833952,0.972941196296,3.251)); +#103572 = CARTESIAN_POINT('',(0.869967818099,0.886181966062,3.251)); +#103573 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#103574 = ORIENTED_EDGE('',*,*,#103575,.T.); +#103575 = EDGE_CURVE('',#103567,#103576,#103578,.T.); +#103576 = VERTEX_POINT('',#103577); +#103577 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#103578 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103579,#103580,#103581, + #103582),.UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.), + .PIECEWISE_BEZIER_KNOTS.); +#103579 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#103580 = CARTESIAN_POINT('',(0.577155416057,0.886181966062,3.251)); +#103581 = CARTESIAN_POINT('',(0.447016570706,1.005475907635,3.251)); +#103582 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#103583 = ORIENTED_EDGE('',*,*,#103584,.T.); +#103584 = EDGE_CURVE('',#103576,#103585,#103587,.T.); +#103585 = VERTEX_POINT('',#103586); +#103586 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.251)); +#103587 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103588,#103589,#103590, + #103591),.UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.), + .PIECEWISE_BEZIER_KNOTS.); +#103588 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#103589 = CARTESIAN_POINT('',(0.423157815488,1.157304560545,3.251)); +#103590 = CARTESIAN_POINT('',(0.418819837428,1.157304560545,3.251)); +#103591 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.251)); +#103592 = ORIENTED_EDGE('',*,*,#103593,.T.); +#103593 = EDGE_CURVE('',#103585,#103594,#103596,.T.); +#103594 = VERTEX_POINT('',#103595); +#103595 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#103596 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103597,#103598,#103599, + #103600),.UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.), + .PIECEWISE_BEZIER_KNOTS.); +#103597 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.251)); +#103598 = CARTESIAN_POINT('',(0.319046755754,1.157304560545,3.251)); +#103599 = CARTESIAN_POINT('',(0.243132429299,1.233218886999,3.251)); +#103600 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#103601 = ORIENTED_EDGE('',*,*,#103602,.T.); +#103602 = EDGE_CURVE('',#103594,#103603,#103605,.T.); +#103603 = VERTEX_POINT('',#103604); +#103604 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#103605 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103606,#103607,#103608, + #103609),.UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.), + .PIECEWISE_BEZIER_KNOTS.); +#103606 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#103607 = CARTESIAN_POINT('',(0.243132429299,1.415413262219,3.251)); +#103608 = CARTESIAN_POINT('',(0.310370799635,1.489158599642,3.251)); +#103609 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#103610 = ORIENTED_EDGE('',*,*,#103611,.T.); +#103611 = EDGE_CURVE('',#103603,#103612,#103614,.T.); +#103612 = VERTEX_POINT('',#103613); +#103613 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.251)); +#103614 = LINE('',#103615,#103616); +#103615 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#103616 = VECTOR('',#103617,1.); +#103617 = DIRECTION('',(1.,6.664894986924E-15,0.)); +#103618 = ORIENTED_EDGE('',*,*,#103619,.T.); +#103619 = EDGE_CURVE('',#103612,#103620,#103622,.T.); +#103620 = VERTEX_POINT('',#103621); +#103621 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#103622 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103623,#103624,#103625, + #103626),.UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.), + .PIECEWISE_BEZIER_KNOTS.); +#103623 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.251)); +#103624 = CARTESIAN_POINT('',(0.501241172342,1.495665525362,3.251)); +#103625 = CARTESIAN_POINT('',(0.505579150402,1.493496577703,3.251)); +#103626 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#103627 = ORIENTED_EDGE('',*,*,#103628,.T.); +#103628 = EDGE_CURVE('',#103620,#103629,#103631,.T.); +#103629 = VERTEX_POINT('',#103630); +#103630 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#103631 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103632,#103633,#103634, + #103635),.UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.), + .PIECEWISE_BEZIER_KNOTS.); +#103632 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#103633 = CARTESIAN_POINT('',(0.546789735119,1.493496577703,3.251)); +#103634 = CARTESIAN_POINT('',(0.577155416057,1.52386234138,3.251)); +#103635 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#103636 = ORIENTED_EDGE('',*,*,#103637,.T.); +#103637 = EDGE_CURVE('',#103629,#103638,#103640,.T.); +#103638 = VERTEX_POINT('',#103639); +#103639 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.251)); +#103640 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103641,#103642,#103643, + #103644),.UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.), + .PIECEWISE_BEZIER_KNOTS.); +#103641 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#103642 = CARTESIAN_POINT('',(0.577155416057,1.595438607036,3.251)); +#103643 = CARTESIAN_POINT('',(0.54895868278,1.625804370716,3.251)); +#103644 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.251)); +#103645 = ORIENTED_EDGE('',*,*,#103646,.T.); +#103646 = EDGE_CURVE('',#103638,#103647,#103649,.T.); +#103647 = VERTEX_POINT('',#103648); +#103648 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.251)); +#103649 = LINE('',#103650,#103651); +#103650 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.251)); +#103651 = VECTOR('',#103652,1.); +#103652 = DIRECTION('',(-1.,-7.545165222323E-15,0.)); +#103653 = ORIENTED_EDGE('',*,*,#103654,.T.); +#103654 = EDGE_CURVE('',#103647,#103655,#103657,.T.); +#103655 = VERTEX_POINT('',#103656); +#103656 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#103657 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103658,#103659,#103660, + #103661),.UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.), + .PIECEWISE_BEZIER_KNOTS.); +#103658 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.251)); +#103659 = CARTESIAN_POINT('',(0.310370799635,1.621466392655,3.251)); +#103660 = CARTESIAN_POINT('',(0.240963398899,1.586762650917,3.251)); +#103661 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#103662 = ORIENTED_EDGE('',*,*,#103663,.T.); +#103663 = EDGE_CURVE('',#103655,#103379,#103664,.T.); +#103664 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103665,#103666,#103667, + #103668),.UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.), + .PIECEWISE_BEZIER_KNOTS.); +#103665 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#103666 = CARTESIAN_POINT('',(0.136852339166,1.473975717804,3.251)); +#103667 = CARTESIAN_POINT('',(0.108655605888,1.400230339009,3.251)); +#103668 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#103669 = FACE_BOUND('',#103670,.T.); +#103670 = EDGE_LOOP('',(#103671,#103685)); +#103671 = ORIENTED_EDGE('',*,*,#103672,.F.); +#103672 = EDGE_CURVE('',#103673,#103675,#103677,.T.); +#103673 = VERTEX_POINT('',#103674); +#103674 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#103675 = VERTEX_POINT('',#103676); +#103676 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#103677 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103678,#103679,#103680, + #103681,#103682,#103683,#103684),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0., + 1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#103678 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#103679 = CARTESIAN_POINT('',(0.976247908233,1.640987335294,3.251)); +#103680 = CARTESIAN_POINT('',(0.939375218835,1.601945615496,3.251)); +#103681 = CARTESIAN_POINT('',(0.939375218835,1.556397052719,3.251)); +#103682 = CARTESIAN_POINT('',(0.939375218835,1.508679459543,3.251)); +#103683 = CARTESIAN_POINT('',(0.978416855892,1.471806770145,3.251)); +#103684 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#103685 = ORIENTED_EDGE('',*,*,#103686,.F.); +#103686 = EDGE_CURVE('',#103675,#103673,#103687,.T.); +#103687 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103688,#103689,#103690, + #103691,#103692,#103693),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#103688 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#103689 = CARTESIAN_POINT('',(1.069514064185,1.471806770145,3.251)); +#103690 = CARTESIAN_POINT('',(1.108555701244,1.508679459543,3.251)); +#103691 = CARTESIAN_POINT('',(1.108555701244,1.604114645896,3.251)); +#103692 = CARTESIAN_POINT('',(1.069514064185,1.640987335294,3.251)); +#103693 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#103694 = PLANE('',#103695); +#103695 = AXIS2_PLACEMENT_3D('',#103696,#103697,#103698); +#103696 = CARTESIAN_POINT('',(0.170471545019,1.148086388195,3.251)); +#103697 = DIRECTION('',(0.,0.,-1.)); +#103698 = DIRECTION('',(-1.,0.,-0.)); +#103699 = ADVANCED_FACE('',(#103700,#103994),#104019,.T.); +#103700 = FACE_BOUND('',#103701,.T.); +#103701 = EDGE_LOOP('',(#103702,#103713,#103722,#103731,#103739,#103748, + #103757,#103766,#103774,#103783,#103792,#103801,#103810,#103819, + #103828,#103837,#103846,#103855,#103864,#103872,#103880,#103888, + #103897,#103906,#103915,#103924,#103933,#103942,#103951,#103960, + #103969,#103978,#103987)); +#103702 = ORIENTED_EDGE('',*,*,#103703,.F.); +#103703 = EDGE_CURVE('',#103704,#103706,#103708,.T.); +#103704 = VERTEX_POINT('',#103705); +#103705 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.25)); +#103706 = VERTEX_POINT('',#103707); +#103707 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.25)); +#103708 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103709,#103710,#103711, + #103712),.UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.), + .PIECEWISE_BEZIER_KNOTS.); +#103709 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.25)); +#103710 = CARTESIAN_POINT('',(0.110824553548,1.194177249942,3.25)); +#103711 = CARTESIAN_POINT('',(0.199752814182,1.07922124506,3.25)); +#103712 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.25)); +#103713 = ORIENTED_EDGE('',*,*,#103714,.F.); +#103714 = EDGE_CURVE('',#103715,#103704,#103717,.T.); +#103715 = VERTEX_POINT('',#103716); +#103716 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.25)); +#103717 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103718,#103719,#103720, + #103721),.UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.), + .PIECEWISE_BEZIER_KNOTS.); +#103718 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.25)); +#103719 = CARTESIAN_POINT('',(0.136852339166,1.473975717804,3.25)); +#103720 = CARTESIAN_POINT('',(0.108655605888,1.400230339009,3.25)); +#103721 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.25)); +#103722 = ORIENTED_EDGE('',*,*,#103723,.F.); +#103723 = EDGE_CURVE('',#103724,#103715,#103726,.T.); +#103724 = VERTEX_POINT('',#103725); +#103725 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.25)); +#103726 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103727,#103728,#103729, + #103730),.UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.), + .PIECEWISE_BEZIER_KNOTS.); +#103727 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.25)); +#103728 = CARTESIAN_POINT('',(0.310370799635,1.621466392655,3.25)); +#103729 = CARTESIAN_POINT('',(0.240963398899,1.586762650917,3.25)); +#103730 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.25)); +#103731 = ORIENTED_EDGE('',*,*,#103732,.F.); +#103732 = EDGE_CURVE('',#103733,#103724,#103735,.T.); +#103733 = VERTEX_POINT('',#103734); +#103734 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.25)); +#103735 = LINE('',#103736,#103737); +#103736 = CARTESIAN_POINT('',(0.392792051809,1.627973318375,3.25)); +#103737 = VECTOR('',#103738,1.); +#103738 = DIRECTION('',(-1.,0.,0.)); +#103739 = ORIENTED_EDGE('',*,*,#103740,.F.); +#103740 = EDGE_CURVE('',#103741,#103733,#103743,.T.); +#103741 = VERTEX_POINT('',#103742); +#103742 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.25)); +#103743 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103744,#103745,#103746, + #103747),.UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.), + .PIECEWISE_BEZIER_KNOTS.); +#103744 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.25)); +#103745 = CARTESIAN_POINT('',(0.577155416057,1.595438607036,3.25)); +#103746 = CARTESIAN_POINT('',(0.54895868278,1.625804370716,3.25)); +#103747 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.25)); +#103748 = ORIENTED_EDGE('',*,*,#103749,.F.); +#103749 = EDGE_CURVE('',#103750,#103741,#103752,.T.); +#103750 = VERTEX_POINT('',#103751); +#103751 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.25)); +#103752 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103753,#103754,#103755, + #103756),.UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.), + .PIECEWISE_BEZIER_KNOTS.); +#103753 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.25)); +#103754 = CARTESIAN_POINT('',(0.546789735119,1.493496577703,3.25)); +#103755 = CARTESIAN_POINT('',(0.577155416057,1.52386234138,3.25)); +#103756 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.25)); +#103757 = ORIENTED_EDGE('',*,*,#103758,.F.); +#103758 = EDGE_CURVE('',#103759,#103750,#103761,.T.); +#103759 = VERTEX_POINT('',#103760); +#103760 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.25)); +#103761 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103762,#103763,#103764, + #103765),.UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.), + .PIECEWISE_BEZIER_KNOTS.); +#103762 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.25)); +#103763 = CARTESIAN_POINT('',(0.501241172342,1.495665525362,3.25)); +#103764 = CARTESIAN_POINT('',(0.505579150402,1.493496577703,3.25)); +#103765 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.25)); +#103766 = ORIENTED_EDGE('',*,*,#103767,.F.); +#103767 = EDGE_CURVE('',#103768,#103759,#103770,.T.); +#103768 = VERTEX_POINT('',#103769); +#103769 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.25)); +#103770 = LINE('',#103771,#103772); +#103771 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.25)); +#103772 = VECTOR('',#103773,1.); +#103773 = DIRECTION('',(1.,6.664894986924E-15,0.)); +#103774 = ORIENTED_EDGE('',*,*,#103775,.F.); +#103775 = EDGE_CURVE('',#103776,#103768,#103778,.T.); +#103776 = VERTEX_POINT('',#103777); +#103777 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.25)); +#103778 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103779,#103780,#103781, + #103782),.UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.), + .PIECEWISE_BEZIER_KNOTS.); +#103779 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.25)); +#103780 = CARTESIAN_POINT('',(0.243132429299,1.415413262219,3.25)); +#103781 = CARTESIAN_POINT('',(0.310370799635,1.489158599642,3.25)); +#103782 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.25)); +#103783 = ORIENTED_EDGE('',*,*,#103784,.F.); +#103784 = EDGE_CURVE('',#103785,#103776,#103787,.T.); +#103785 = VERTEX_POINT('',#103786); +#103786 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.25)); +#103787 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103788,#103789,#103790, + #103791),.UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.), + .PIECEWISE_BEZIER_KNOTS.); +#103788 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.25)); +#103789 = CARTESIAN_POINT('',(0.319046755754,1.157304560545,3.25)); +#103790 = CARTESIAN_POINT('',(0.243132429299,1.233218886999,3.25)); +#103791 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.25)); +#103792 = ORIENTED_EDGE('',*,*,#103793,.F.); +#103793 = EDGE_CURVE('',#103794,#103785,#103796,.T.); +#103794 = VERTEX_POINT('',#103795); +#103795 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.25)); +#103796 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103797,#103798,#103799, + #103800),.UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.), + .PIECEWISE_BEZIER_KNOTS.); +#103797 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.25)); +#103798 = CARTESIAN_POINT('',(0.423157815488,1.157304560545,3.25)); +#103799 = CARTESIAN_POINT('',(0.418819837428,1.157304560545,3.25)); +#103800 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.25)); +#103801 = ORIENTED_EDGE('',*,*,#103802,.F.); +#103802 = EDGE_CURVE('',#103803,#103794,#103805,.T.); +#103803 = VERTEX_POINT('',#103804); +#103804 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.25)); +#103805 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103806,#103807,#103808, + #103809),.UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.), + .PIECEWISE_BEZIER_KNOTS.); +#103806 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.25)); +#103807 = CARTESIAN_POINT('',(0.577155416057,0.886181966062,3.25)); +#103808 = CARTESIAN_POINT('',(0.447016570706,1.005475907635,3.25)); +#103809 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.25)); +#103810 = ORIENTED_EDGE('',*,*,#103811,.F.); +#103811 = EDGE_CURVE('',#103812,#103803,#103814,.T.); +#103812 = VERTEX_POINT('',#103813); +#103813 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.25)); +#103814 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103815,#103816,#103817, + #103818),.UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.), + .PIECEWISE_BEZIER_KNOTS.); +#103815 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.25)); +#103816 = CARTESIAN_POINT('',(0.982754833952,0.972941196296,3.25)); +#103817 = CARTESIAN_POINT('',(0.869967818099,0.886181966062,3.25)); +#103818 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.25)); +#103819 = ORIENTED_EDGE('',*,*,#103820,.F.); +#103820 = EDGE_CURVE('',#103821,#103812,#103823,.T.); +#103821 = VERTEX_POINT('',#103822); +#103822 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.25)); +#103823 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103824,#103825,#103826, + #103827),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#103824 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.25)); +#103825 = CARTESIAN_POINT('',(1.097710756094,1.061869291451,3.25)); +#103826 = CARTESIAN_POINT('',(1.056500130006,1.074883184259,3.25)); +#103827 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.25)); +#103828 = ORIENTED_EDGE('',*,*,#103829,.F.); +#103829 = EDGE_CURVE('',#103830,#103821,#103832,.T.); +#103830 = VERTEX_POINT('',#103831); +#103831 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.25)); +#103832 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103833,#103834,#103835, + #103836),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#103833 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.25)); +#103834 = CARTESIAN_POINT('',(1.355819457768,1.159473425464,3.25)); +#103835 = CARTESIAN_POINT('',(1.258215323754,1.061869291451,3.25)); +#103836 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.25)); +#103837 = ORIENTED_EDGE('',*,*,#103838,.F.); +#103838 = EDGE_CURVE('',#103839,#103830,#103841,.T.); +#103839 = VERTEX_POINT('',#103840); +#103840 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.25)); +#103841 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103842,#103843,#103844, + #103845),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#103842 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.25)); +#103843 = CARTESIAN_POINT('',(1.301594938871,1.443609912757,3.25)); +#103844 = CARTESIAN_POINT('',(1.355819457768,1.367695586302,3.25)); +#103845 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.25)); +#103846 = ORIENTED_EDGE('',*,*,#103847,.F.); +#103847 = EDGE_CURVE('',#103848,#103839,#103850,.T.); +#103848 = VERTEX_POINT('',#103849); +#103849 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.25)); +#103850 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103851,#103852,#103853, + #103854),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#103851 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.25)); +#103852 = CARTESIAN_POINT('',(1.115062626963,1.335160874963,3.25)); +#103853 = CARTESIAN_POINT('',(1.195314890107,1.395892319578,3.25)); +#103854 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.25)); +#103855 = ORIENTED_EDGE('',*,*,#103856,.F.); +#103856 = EDGE_CURVE('',#103857,#103848,#103859,.T.); +#103857 = VERTEX_POINT('',#103858); +#103858 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.25)); +#103859 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103860,#103861,#103862, + #103863),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#103860 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.25)); +#103861 = CARTESIAN_POINT('',(0.898164510007,1.363357608241,3.25)); +#103862 = CARTESIAN_POINT('',(0.956727006963,1.335160874963,3.25)); +#103863 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.25)); +#103864 = ORIENTED_EDGE('',*,*,#103865,.F.); +#103865 = EDGE_CURVE('',#103866,#103857,#103868,.T.); +#103866 = VERTEX_POINT('',#103867); +#103867 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.25)); +#103868 = LINE('',#103869,#103870); +#103869 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.25)); +#103870 = VECTOR('',#103871,1.); +#103871 = DIRECTION('',(0.886348842796,0.463018065387,0.)); +#103872 = ORIENTED_EDGE('',*,*,#103873,.F.); +#103873 = EDGE_CURVE('',#103874,#103866,#103876,.T.); +#103874 = VERTEX_POINT('',#103875); +#103875 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.25)); +#103876 = LINE('',#103877,#103878); +#103877 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.25)); +#103878 = VECTOR('',#103879,1.); +#103879 = DIRECTION('',(0.50488304865,-0.863187758941,0.)); +#103880 = ORIENTED_EDGE('',*,*,#103881,.F.); +#103881 = EDGE_CURVE('',#103882,#103874,#103884,.T.); +#103882 = VERTEX_POINT('',#103883); +#103883 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.25)); +#103884 = LINE('',#103885,#103886); +#103885 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.25)); +#103886 = VECTOR('',#103887,1.); +#103887 = DIRECTION('',(-0.884094950248,-0.467307306755,0.)); +#103888 = ORIENTED_EDGE('',*,*,#103889,.F.); +#103889 = EDGE_CURVE('',#103890,#103882,#103892,.T.); +#103890 = VERTEX_POINT('',#103891); +#103891 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.25)); +#103892 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103893,#103894,#103895, + #103896),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#103893 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.25)); +#103894 = CARTESIAN_POINT('',(0.804898395422,1.54772101386,3.25)); +#103895 = CARTESIAN_POINT('',(0.804898395422,1.541214088139,3.25)); +#103896 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.25)); +#103897 = ORIENTED_EDGE('',*,*,#103898,.F.); +#103898 = EDGE_CURVE('',#103899,#103890,#103901,.T.); +#103899 = VERTEX_POINT('',#103900); +#103900 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.25)); +#103901 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103902,#103903,#103904, + #103905),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#103902 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.25)); +#103903 = CARTESIAN_POINT('',(0.902502529437,1.771126015165,3.25)); +#103904 = CARTESIAN_POINT('',(0.804898395422,1.673521881152,3.25)); +#103905 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.25)); +#103906 = ORIENTED_EDGE('',*,*,#103907,.F.); +#103907 = EDGE_CURVE('',#103908,#103899,#103910,.T.); +#103908 = VERTEX_POINT('',#103909); +#103909 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.25)); +#103910 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103911,#103912,#103913, + #103914),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#103911 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.25)); +#103912 = CARTESIAN_POINT('',(1.199652909538,1.71039457055,3.25)); +#103913 = CARTESIAN_POINT('',(1.117231657363,1.771126015165,3.25)); +#103914 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.25)); +#103915 = ORIENTED_EDGE('',*,*,#103916,.F.); +#103916 = EDGE_CURVE('',#103917,#103908,#103919,.T.); +#103917 = VERTEX_POINT('',#103918); +#103918 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.25)); +#103919 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103920,#103921,#103922, + #103923),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#103920 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.25)); +#103921 = CARTESIAN_POINT('',(1.353650551478,1.571579851819,3.25)); +#103922 = CARTESIAN_POINT('',(1.295088054522,1.606283510815,3.25)); +#103923 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.25)); +#103924 = ORIENTED_EDGE('',*,*,#103925,.F.); +#103925 = EDGE_CURVE('',#103926,#103917,#103928,.T.); +#103926 = VERTEX_POINT('',#103927); +#103927 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.25)); +#103928 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103929,#103930,#103931, + #103932),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#103929 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.25)); +#103930 = CARTESIAN_POINT('',(1.492465311578,1.369864658071,3.25)); +#103931 = CARTESIAN_POINT('',(1.459930600242,1.454454940646,3.25)); +#103932 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.25)); +#103933 = ORIENTED_EDGE('',*,*,#103934,.F.); +#103934 = EDGE_CURVE('',#103935,#103926,#103937,.T.); +#103935 = VERTEX_POINT('',#103936); +#103936 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.25)); +#103937 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103938,#103939,#103940, + #103941),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#103938 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.25)); +#103939 = CARTESIAN_POINT('',(1.455592637695,1.100911052618,3.25)); +#103940 = CARTESIAN_POINT('',(1.492465311578,1.189839271884,3.25)); +#103941 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.25)); +#103942 = ORIENTED_EDGE('',*,*,#103943,.F.); +#103943 = EDGE_CURVE('',#103944,#103935,#103946,.T.); +#103944 = VERTEX_POINT('',#103945); +#103945 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.25)); +#103946 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103947,#103948,#103949, + #103950),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#103947 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.25)); +#103948 = CARTESIAN_POINT('',(1.23435654785,0.93173057021,3.25)); +#103949 = CARTESIAN_POINT('',(1.32328474643,0.96860323892,3.25)); +#103950 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.25)); +#103951 = ORIENTED_EDGE('',*,*,#103952,.F.); +#103952 = EDGE_CURVE('',#103953,#103944,#103955,.T.); +#103953 = VERTEX_POINT('',#103954); +#103954 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.25)); +#103955 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103956,#103957,#103958, + #103959),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#103956 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.25)); +#103957 = CARTESIAN_POINT('',(1.108555659874,0.933899538554,3.25)); +#103958 = CARTESIAN_POINT('',(1.123738541712,0.93173057021,3.25)); +#103959 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.25)); +#103960 = ORIENTED_EDGE('',*,*,#103961,.F.); +#103961 = EDGE_CURVE('',#103962,#103953,#103964,.T.); +#103962 = VERTEX_POINT('',#103963); +#103963 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.25)); +#103964 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103965,#103966,#103967, + #103968),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#103965 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.25)); +#103966 = CARTESIAN_POINT('',(1.032641374789,0.866661147534,3.25)); +#103967 = CARTESIAN_POINT('',(1.063007097096,0.899195858871,3.25)); +#103968 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.25)); +#103969 = ORIENTED_EDGE('',*,*,#103970,.F.); +#103970 = EDGE_CURVE('',#103971,#103962,#103973,.T.); +#103971 = VERTEX_POINT('',#103972); +#103972 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.25)); +#103973 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103974,#103975,#103976, + #103977),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#103974 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.25)); +#103975 = CARTESIAN_POINT('',(0.830926139671,0.756043120711,3.25)); +#103976 = CARTESIAN_POINT('',(0.919854358935,0.786408850775,3.25)); +#103977 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.25)); +#103978 = ORIENTED_EDGE('',*,*,#103979,.F.); +#103979 = EDGE_CURVE('',#103980,#103971,#103982,.T.); +#103980 = VERTEX_POINT('',#103981); +#103981 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.25)); +#103982 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103983,#103984,#103985, + #103986),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#103983 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.25)); +#103984 = CARTESIAN_POINT('',(0.522930897161,0.797253754554,3.25)); +#103985 = CARTESIAN_POINT('',(0.627041956895,0.756043120711,3.25)); +#103986 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.25)); +#103987 = ORIENTED_EDGE('',*,*,#103988,.F.); +#103988 = EDGE_CURVE('',#103706,#103980,#103989,.T.); +#103989 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#103990,#103991,#103992, + #103993),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#103990 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.25)); +#103991 = CARTESIAN_POINT('',(0.347243406292,0.975110185327,3.25)); +#103992 = CARTESIAN_POINT('',(0.38845407375,0.916547709055,3.25)); +#103993 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.25)); +#103994 = FACE_BOUND('',#103995,.T.); +#103995 = EDGE_LOOP('',(#103996,#104009)); +#103996 = ORIENTED_EDGE('',*,*,#103997,.T.); +#103997 = EDGE_CURVE('',#103998,#104000,#104002,.T.); +#103998 = VERTEX_POINT('',#103999); +#103999 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.25)); +#104000 = VERTEX_POINT('',#104001); +#104001 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.25)); +#104002 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#104003,#104004,#104005, + #104006,#104007,#104008),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#104003 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.25)); +#104004 = CARTESIAN_POINT('',(1.069514064185,1.471806770145,3.25)); +#104005 = CARTESIAN_POINT('',(1.108555701244,1.508679459543,3.25)); +#104006 = CARTESIAN_POINT('',(1.108555701244,1.604114645896,3.25)); +#104007 = CARTESIAN_POINT('',(1.069514064185,1.640987335294,3.25)); +#104008 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.25)); +#104009 = ORIENTED_EDGE('',*,*,#104010,.T.); +#104010 = EDGE_CURVE('',#104000,#103998,#104011,.T.); +#104011 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#104012,#104013,#104014, + #104015,#104016,#104017,#104018),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0., + 1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#104012 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.25)); +#104013 = CARTESIAN_POINT('',(0.976247908233,1.640987335294,3.25)); +#104014 = CARTESIAN_POINT('',(0.939375218835,1.601945615496,3.25)); +#104015 = CARTESIAN_POINT('',(0.939375218835,1.556397052719,3.25)); +#104016 = CARTESIAN_POINT('',(0.939375218835,1.508679459543,3.25)); +#104017 = CARTESIAN_POINT('',(0.978416855892,1.471806770145,3.25)); +#104018 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.25)); +#104019 = PLANE('',#104020); +#104020 = AXIS2_PLACEMENT_3D('',#104021,#104022,#104023); +#104021 = CARTESIAN_POINT('',(0.170471545019,1.148086388195,3.25)); +#104022 = DIRECTION('',(0.,0.,-1.)); +#104023 = DIRECTION('',(-1.,0.,-0.)); +#104024 = ADVANCED_FACE('',(#104025),#104041,.F.); +#104025 = FACE_BOUND('',#104026,.F.); +#104026 = EDGE_LOOP('',(#104027,#104033,#104034,#104040)); +#104027 = ORIENTED_EDGE('',*,*,#104028,.F.); +#104028 = EDGE_CURVE('',#103379,#103704,#104029,.T.); +#104029 = LINE('',#104030,#104031); +#104030 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#104031 = VECTOR('',#104032,1.); +#104032 = DIRECTION('',(-0.,-0.,-1.)); +#104033 = ORIENTED_EDGE('',*,*,#103378,.T.); +#104034 = ORIENTED_EDGE('',*,*,#104035,.T.); +#104035 = EDGE_CURVE('',#103381,#103706,#104036,.T.); +#104036 = LINE('',#104037,#104038); +#104037 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#104038 = VECTOR('',#104039,1.); +#104039 = DIRECTION('',(-0.,-0.,-1.)); +#104040 = ORIENTED_EDGE('',*,*,#103703,.F.); +#104041 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104042,#104043) + ,(#104044,#104045) + ,(#104046,#104047) + ,(#104048,#104049 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(35.,36.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104042 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#104043 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.25)); +#104044 = CARTESIAN_POINT('',(0.110824553548,1.194177249942,3.251)); +#104045 = CARTESIAN_POINT('',(0.110824553548,1.194177249942,3.25)); +#104046 = CARTESIAN_POINT('',(0.199752814182,1.07922124506,3.251)); +#104047 = CARTESIAN_POINT('',(0.199752814182,1.07922124506,3.25)); +#104048 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#104049 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.25)); +#104050 = ADVANCED_FACE('',(#104051),#104062,.F.); +#104051 = FACE_BOUND('',#104052,.F.); +#104052 = EDGE_LOOP('',(#104053,#104054,#104055,#104061)); +#104053 = ORIENTED_EDGE('',*,*,#104035,.F.); +#104054 = ORIENTED_EDGE('',*,*,#103389,.T.); +#104055 = ORIENTED_EDGE('',*,*,#104056,.T.); +#104056 = EDGE_CURVE('',#103390,#103980,#104057,.T.); +#104057 = LINE('',#104058,#104059); +#104058 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#104059 = VECTOR('',#104060,1.); +#104060 = DIRECTION('',(-0.,-0.,-1.)); +#104061 = ORIENTED_EDGE('',*,*,#103988,.F.); +#104062 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104063,#104064) + ,(#104065,#104066) + ,(#104067,#104068) + ,(#104069,#104070 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104063 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.251)); +#104064 = CARTESIAN_POINT('',(0.323384651074,1.040179608001,3.25)); +#104065 = CARTESIAN_POINT('',(0.347243406292,0.975110185327,3.251)); +#104066 = CARTESIAN_POINT('',(0.347243406292,0.975110185327,3.25)); +#104067 = CARTESIAN_POINT('',(0.38845407375,0.916547709055,3.251)); +#104068 = CARTESIAN_POINT('',(0.38845407375,0.916547709055,3.25)); +#104069 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#104070 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.25)); +#104071 = ADVANCED_FACE('',(#104072),#104083,.F.); +#104072 = FACE_BOUND('',#104073,.F.); +#104073 = EDGE_LOOP('',(#104074,#104075,#104076,#104082)); +#104074 = ORIENTED_EDGE('',*,*,#104056,.F.); +#104075 = ORIENTED_EDGE('',*,*,#103398,.T.); +#104076 = ORIENTED_EDGE('',*,*,#104077,.T.); +#104077 = EDGE_CURVE('',#103399,#103971,#104078,.T.); +#104078 = LINE('',#104079,#104080); +#104079 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#104080 = VECTOR('',#104081,1.); +#104081 = DIRECTION('',(-0.,-0.,-1.)); +#104082 = ORIENTED_EDGE('',*,*,#103979,.F.); +#104083 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104084,#104085) + ,(#104086,#104087) + ,(#104088,#104089) + ,(#104090,#104091 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104084 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.251)); +#104085 = CARTESIAN_POINT('',(0.440509644986,0.868830126222,3.25)); +#104086 = CARTESIAN_POINT('',(0.522930897161,0.797253754554,3.251)); +#104087 = CARTESIAN_POINT('',(0.522930897161,0.797253754554,3.25)); +#104088 = CARTESIAN_POINT('',(0.627041956895,0.756043120711,3.251)); +#104089 = CARTESIAN_POINT('',(0.627041956895,0.756043120711,3.25)); +#104090 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#104091 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.25)); +#104092 = ADVANCED_FACE('',(#104093),#104104,.F.); +#104093 = FACE_BOUND('',#104094,.F.); +#104094 = EDGE_LOOP('',(#104095,#104096,#104097,#104103)); +#104095 = ORIENTED_EDGE('',*,*,#104077,.F.); +#104096 = ORIENTED_EDGE('',*,*,#103407,.T.); +#104097 = ORIENTED_EDGE('',*,*,#104098,.T.); +#104098 = EDGE_CURVE('',#103408,#103962,#104099,.T.); +#104099 = LINE('',#104100,#104101); +#104100 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#104101 = VECTOR('',#104102,1.); +#104102 = DIRECTION('',(-0.,-0.,-1.)); +#104103 = ORIENTED_EDGE('',*,*,#103970,.F.); +#104104 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104105,#104106) + ,(#104107,#104108) + ,(#104109,#104110) + ,(#104111,#104112 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104105 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.251)); +#104106 = CARTESIAN_POINT('',(0.735490994688,0.756043120711,3.25)); +#104107 = CARTESIAN_POINT('',(0.830926139671,0.756043120711,3.251)); +#104108 = CARTESIAN_POINT('',(0.830926139671,0.756043120711,3.25)); +#104109 = CARTESIAN_POINT('',(0.919854358935,0.786408850775,3.251)); +#104110 = CARTESIAN_POINT('',(0.919854358935,0.786408850775,3.25)); +#104111 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#104112 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.25)); +#104113 = ADVANCED_FACE('',(#104114),#104125,.F.); +#104114 = FACE_BOUND('',#104115,.F.); +#104115 = EDGE_LOOP('',(#104116,#104117,#104118,#104124)); +#104116 = ORIENTED_EDGE('',*,*,#104098,.F.); +#104117 = ORIENTED_EDGE('',*,*,#103416,.T.); +#104118 = ORIENTED_EDGE('',*,*,#104119,.T.); +#104119 = EDGE_CURVE('',#103417,#103953,#104120,.T.); +#104120 = LINE('',#104121,#104122); +#104121 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#104122 = VECTOR('',#104123,1.); +#104123 = DIRECTION('',(-0.,-0.,-1.)); +#104124 = ORIENTED_EDGE('',*,*,#103961,.F.); +#104125 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104126,#104127) + ,(#104128,#104129) + ,(#104130,#104131) + ,(#104132,#104133 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104126 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.251)); +#104127 = CARTESIAN_POINT('',(0.995768685391,0.840633372259,3.25)); +#104128 = CARTESIAN_POINT('',(1.032641374789,0.866661147534,3.251)); +#104129 = CARTESIAN_POINT('',(1.032641374789,0.866661147534,3.25)); +#104130 = CARTESIAN_POINT('',(1.063007097096,0.899195858871,3.251)); +#104131 = CARTESIAN_POINT('',(1.063007097096,0.899195858871,3.25)); +#104132 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#104133 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.25)); +#104134 = ADVANCED_FACE('',(#104135),#104146,.F.); +#104135 = FACE_BOUND('',#104136,.F.); +#104136 = EDGE_LOOP('',(#104137,#104138,#104139,#104145)); +#104137 = ORIENTED_EDGE('',*,*,#104119,.F.); +#104138 = ORIENTED_EDGE('',*,*,#103425,.T.); +#104139 = ORIENTED_EDGE('',*,*,#104140,.T.); +#104140 = EDGE_CURVE('',#103426,#103944,#104141,.T.); +#104141 = LINE('',#104142,#104143); +#104142 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#104143 = VECTOR('',#104144,1.); +#104144 = DIRECTION('',(-0.,-0.,-1.)); +#104145 = ORIENTED_EDGE('',*,*,#103952,.F.); +#104146 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104147,#104148) + ,(#104149,#104150) + ,(#104151,#104152) + ,(#104153,#104154 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104147 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.251)); +#104148 = CARTESIAN_POINT('',(1.091203830374,0.936068527583,3.25)); +#104149 = CARTESIAN_POINT('',(1.108555659874,0.933899538554,3.251)); +#104150 = CARTESIAN_POINT('',(1.108555659874,0.933899538554,3.25)); +#104151 = CARTESIAN_POINT('',(1.123738541712,0.93173057021,3.251)); +#104152 = CARTESIAN_POINT('',(1.123738541712,0.93173057021,3.25)); +#104153 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#104154 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.25)); +#104155 = ADVANCED_FACE('',(#104156),#104167,.F.); +#104156 = FACE_BOUND('',#104157,.F.); +#104157 = EDGE_LOOP('',(#104158,#104159,#104160,#104166)); +#104158 = ORIENTED_EDGE('',*,*,#104140,.F.); +#104159 = ORIENTED_EDGE('',*,*,#103434,.T.); +#104160 = ORIENTED_EDGE('',*,*,#104161,.T.); +#104161 = EDGE_CURVE('',#103435,#103935,#104162,.T.); +#104162 = LINE('',#104163,#104164); +#104163 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#104164 = VECTOR('',#104165,1.); +#104165 = DIRECTION('',(-0.,-0.,-1.)); +#104166 = ORIENTED_EDGE('',*,*,#103943,.F.); +#104167 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104168,#104169) + ,(#104170,#104171) + ,(#104172,#104173) + ,(#104174,#104175 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104168 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.251)); +#104169 = CARTESIAN_POINT('',(1.141090371211,0.93173057021,3.25)); +#104170 = CARTESIAN_POINT('',(1.23435654785,0.93173057021,3.251)); +#104171 = CARTESIAN_POINT('',(1.23435654785,0.93173057021,3.25)); +#104172 = CARTESIAN_POINT('',(1.32328474643,0.96860323892,3.251)); +#104173 = CARTESIAN_POINT('',(1.32328474643,0.96860323892,3.25)); +#104174 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#104175 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.25)); +#104176 = ADVANCED_FACE('',(#104177),#104188,.F.); +#104177 = FACE_BOUND('',#104178,.F.); +#104178 = EDGE_LOOP('',(#104179,#104180,#104181,#104187)); +#104179 = ORIENTED_EDGE('',*,*,#104161,.F.); +#104180 = ORIENTED_EDGE('',*,*,#103443,.T.); +#104181 = ORIENTED_EDGE('',*,*,#104182,.T.); +#104182 = EDGE_CURVE('',#103444,#103926,#104183,.T.); +#104183 = LINE('',#104184,#104185); +#104184 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#104185 = VECTOR('',#104186,1.); +#104186 = DIRECTION('',(-0.,-0.,-1.)); +#104187 = ORIENTED_EDGE('',*,*,#103934,.F.); +#104188 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104189,#104190) + ,(#104191,#104192) + ,(#104193,#104194) + ,(#104195,#104196 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104189 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.251)); +#104190 = CARTESIAN_POINT('',(1.390523158135,1.035841650627,3.25)); +#104191 = CARTESIAN_POINT('',(1.455592637695,1.100911052618,3.251)); +#104192 = CARTESIAN_POINT('',(1.455592637695,1.100911052618,3.25)); +#104193 = CARTESIAN_POINT('',(1.492465311578,1.189839271884,3.251)); +#104194 = CARTESIAN_POINT('',(1.492465311578,1.189839271884,3.25)); +#104195 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#104196 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.25)); +#104197 = ADVANCED_FACE('',(#104198),#104209,.F.); +#104198 = FACE_BOUND('',#104199,.F.); +#104199 = EDGE_LOOP('',(#104200,#104201,#104202,#104208)); +#104200 = ORIENTED_EDGE('',*,*,#104182,.F.); +#104201 = ORIENTED_EDGE('',*,*,#103452,.T.); +#104202 = ORIENTED_EDGE('',*,*,#104203,.T.); +#104203 = EDGE_CURVE('',#103453,#103917,#104204,.T.); +#104204 = LINE('',#104205,#104206); +#104205 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#104206 = VECTOR('',#104207,1.); +#104207 = DIRECTION('',(-0.,-0.,-1.)); +#104208 = ORIENTED_EDGE('',*,*,#103925,.F.); +#104209 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104210,#104211) + ,(#104212,#104213) + ,(#104214,#104215) + ,(#104216,#104217 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104210 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.251)); +#104211 = CARTESIAN_POINT('',(1.492465311578,1.283105427835,3.25)); +#104212 = CARTESIAN_POINT('',(1.492465311578,1.369864658071,3.251)); +#104213 = CARTESIAN_POINT('',(1.492465311578,1.369864658071,3.25)); +#104214 = CARTESIAN_POINT('',(1.459930600242,1.454454940646,3.251)); +#104215 = CARTESIAN_POINT('',(1.459930600242,1.454454940646,3.25)); +#104216 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#104217 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.25)); +#104218 = ADVANCED_FACE('',(#104219),#104230,.F.); +#104219 = FACE_BOUND('',#104220,.F.); +#104220 = EDGE_LOOP('',(#104221,#104222,#104223,#104229)); +#104221 = ORIENTED_EDGE('',*,*,#104203,.F.); +#104222 = ORIENTED_EDGE('',*,*,#103461,.T.); +#104223 = ORIENTED_EDGE('',*,*,#104224,.T.); +#104224 = EDGE_CURVE('',#103462,#103908,#104225,.T.); +#104225 = LINE('',#104226,#104227); +#104226 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#104227 = VECTOR('',#104228,1.); +#104228 = DIRECTION('',(-0.,-0.,-1.)); +#104229 = ORIENTED_EDGE('',*,*,#103916,.F.); +#104230 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104231,#104232) + ,(#104233,#104234) + ,(#104235,#104236) + ,(#104237,#104238 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104231 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.251)); +#104232 = CARTESIAN_POINT('',(1.401368123969,1.519524280581,3.25)); +#104233 = CARTESIAN_POINT('',(1.353650551478,1.571579851819,3.251)); +#104234 = CARTESIAN_POINT('',(1.353650551478,1.571579851819,3.25)); +#104235 = CARTESIAN_POINT('',(1.295088054522,1.606283510815,3.251)); +#104236 = CARTESIAN_POINT('',(1.295088054522,1.606283510815,3.25)); +#104237 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#104238 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.25)); +#104239 = ADVANCED_FACE('',(#104240),#104251,.F.); +#104240 = FACE_BOUND('',#104241,.F.); +#104241 = EDGE_LOOP('',(#104242,#104243,#104244,#104250)); +#104242 = ORIENTED_EDGE('',*,*,#104224,.F.); +#104243 = ORIENTED_EDGE('',*,*,#103470,.T.); +#104244 = ORIENTED_EDGE('',*,*,#104245,.T.); +#104245 = EDGE_CURVE('',#103471,#103899,#104246,.T.); +#104246 = LINE('',#104247,#104248); +#104247 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#104248 = VECTOR('',#104249,1.); +#104249 = DIRECTION('',(-0.,-0.,-1.)); +#104250 = ORIENTED_EDGE('',*,*,#103907,.F.); +#104251 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104252,#104253) + ,(#104254,#104255) + ,(#104256,#104257) + ,(#104258,#104259 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104252 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.251)); +#104253 = CARTESIAN_POINT('',(1.227849663501,1.623635340314,3.25)); +#104254 = CARTESIAN_POINT('',(1.199652909538,1.71039457055,3.251)); +#104255 = CARTESIAN_POINT('',(1.199652909538,1.71039457055,3.25)); +#104256 = CARTESIAN_POINT('',(1.117231657363,1.771126015165,3.251)); +#104257 = CARTESIAN_POINT('',(1.117231657363,1.771126015165,3.25)); +#104258 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#104259 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.25)); +#104260 = ADVANCED_FACE('',(#104261),#104272,.F.); +#104261 = FACE_BOUND('',#104262,.F.); +#104262 = EDGE_LOOP('',(#104263,#104264,#104265,#104271)); +#104263 = ORIENTED_EDGE('',*,*,#104245,.F.); +#104264 = ORIENTED_EDGE('',*,*,#103479,.T.); +#104265 = ORIENTED_EDGE('',*,*,#104266,.T.); +#104266 = EDGE_CURVE('',#103480,#103890,#104267,.T.); +#104267 = LINE('',#104268,#104269); +#104268 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#104269 = VECTOR('',#104270,1.); +#104270 = DIRECTION('',(-0.,-0.,-1.)); +#104271 = ORIENTED_EDGE('',*,*,#103898,.F.); +#104272 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104273,#104274) + ,(#104275,#104276) + ,(#104277,#104278) + ,(#104279,#104280 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104273 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.251)); +#104274 = CARTESIAN_POINT('',(1.021796471009,1.771126015165,3.25)); +#104275 = CARTESIAN_POINT('',(0.902502529437,1.771126015165,3.251)); +#104276 = CARTESIAN_POINT('',(0.902502529437,1.771126015165,3.25)); +#104277 = CARTESIAN_POINT('',(0.804898395422,1.673521881152,3.251)); +#104278 = CARTESIAN_POINT('',(0.804898395422,1.673521881152,3.25)); +#104279 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#104280 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.25)); +#104281 = ADVANCED_FACE('',(#104282),#104293,.F.); +#104282 = FACE_BOUND('',#104283,.T.); +#104283 = EDGE_LOOP('',(#104284,#104285,#104291,#104292)); +#104284 = ORIENTED_EDGE('',*,*,#103889,.T.); +#104285 = ORIENTED_EDGE('',*,*,#104286,.F.); +#104286 = EDGE_CURVE('',#103489,#103882,#104287,.T.); +#104287 = LINE('',#104288,#104289); +#104288 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.251)); +#104289 = VECTOR('',#104290,1.); +#104290 = DIRECTION('',(-0.,-0.,-1.)); +#104291 = ORIENTED_EDGE('',*,*,#103488,.F.); +#104292 = ORIENTED_EDGE('',*,*,#104266,.T.); +#104293 = PLANE('',#104294); +#104294 = AXIS2_PLACEMENT_3D('',#104295,#104296,#104297); +#104295 = CARTESIAN_POINT('',(0.804898395422,1.55422793958,3.251)); +#104296 = DIRECTION('',(1.,0.,-0.)); +#104297 = DIRECTION('',(-0.,0.,-1.)); +#104298 = ADVANCED_FACE('',(#104299),#104310,.F.); +#104299 = FACE_BOUND('',#104300,.T.); +#104300 = EDGE_LOOP('',(#104301,#104302,#104308,#104309)); +#104301 = ORIENTED_EDGE('',*,*,#103881,.T.); +#104302 = ORIENTED_EDGE('',*,*,#104303,.F.); +#104303 = EDGE_CURVE('',#103498,#103874,#104304,.T.); +#104304 = LINE('',#104305,#104306); +#104305 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.251)); +#104306 = VECTOR('',#104307,1.); +#104307 = DIRECTION('',(-0.,-0.,-1.)); +#104308 = ORIENTED_EDGE('',*,*,#103497,.F.); +#104309 = ORIENTED_EDGE('',*,*,#104286,.T.); +#104310 = PLANE('',#104311); +#104311 = AXIS2_PLACEMENT_3D('',#104312,#104313,#104314); +#104312 = CARTESIAN_POINT('',(0.804898395422,1.53253813202,3.251)); +#104313 = DIRECTION('',(0.467307306755,-0.884094950248,0.)); +#104314 = DIRECTION('',(0.884094950248,0.467307306755,0.)); +#104315 = ADVANCED_FACE('',(#104316),#104327,.F.); +#104316 = FACE_BOUND('',#104317,.T.); +#104317 = EDGE_LOOP('',(#104318,#104319,#104325,#104326)); +#104318 = ORIENTED_EDGE('',*,*,#103873,.T.); +#104319 = ORIENTED_EDGE('',*,*,#104320,.F.); +#104320 = EDGE_CURVE('',#103506,#103866,#104321,.T.); +#104321 = LINE('',#104322,#104323); +#104322 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.251)); +#104323 = VECTOR('',#104324,1.); +#104324 = DIRECTION('',(-0.,-0.,-1.)); +#104325 = ORIENTED_EDGE('',*,*,#103505,.F.); +#104326 = ORIENTED_EDGE('',*,*,#104303,.T.); +#104327 = PLANE('',#104328); +#104328 = AXIS2_PLACEMENT_3D('',#104329,#104330,#104331); +#104329 = CARTESIAN_POINT('',(0.501241089602,1.372033564361,3.251)); +#104330 = DIRECTION('',(0.863187758941,0.50488304865,-0.)); +#104331 = DIRECTION('',(-0.50488304865,0.863187758941,0.)); +#104332 = ADVANCED_FACE('',(#104333),#104344,.F.); +#104333 = FACE_BOUND('',#104334,.T.); +#104334 = EDGE_LOOP('',(#104335,#104336,#104342,#104343)); +#104335 = ORIENTED_EDGE('',*,*,#103865,.T.); +#104336 = ORIENTED_EDGE('',*,*,#104337,.F.); +#104337 = EDGE_CURVE('',#103514,#103857,#104338,.T.); +#104338 = LINE('',#104339,#104340); +#104339 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.251)); +#104340 = VECTOR('',#104341,1.); +#104341 = DIRECTION('',(-0.,-0.,-1.)); +#104342 = ORIENTED_EDGE('',*,*,#103513,.F.); +#104343 = ORIENTED_EDGE('',*,*,#104320,.T.); +#104344 = PLANE('',#104345); +#104345 = AXIS2_PLACEMENT_3D('',#104346,#104347,#104348); +#104346 = CARTESIAN_POINT('',(0.568479459938,1.257077559479,3.251)); +#104347 = DIRECTION('',(-0.463018065387,0.886348842796,0.)); +#104348 = DIRECTION('',(-0.886348842796,-0.463018065387,0.)); +#104349 = ADVANCED_FACE('',(#104350),#104361,.F.); +#104350 = FACE_BOUND('',#104351,.F.); +#104351 = EDGE_LOOP('',(#104352,#104353,#104354,#104360)); +#104352 = ORIENTED_EDGE('',*,*,#104337,.F.); +#104353 = ORIENTED_EDGE('',*,*,#103521,.T.); +#104354 = ORIENTED_EDGE('',*,*,#104355,.T.); +#104355 = EDGE_CURVE('',#103522,#103848,#104356,.T.); +#104356 = LINE('',#104357,#104358); +#104357 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#104358 = VECTOR('',#104359,1.); +#104359 = DIRECTION('',(-0.,-0.,-1.)); +#104360 = ORIENTED_EDGE('',*,*,#103856,.F.); +#104361 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104362,#104363) + ,(#104364,#104365) + ,(#104366,#104367) + ,(#104368,#104369 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104362 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.251)); +#104363 = CARTESIAN_POINT('',(0.859122872949,1.408906212388,3.25)); +#104364 = CARTESIAN_POINT('',(0.898164510007,1.363357608241,3.251)); +#104365 = CARTESIAN_POINT('',(0.898164510007,1.363357608241,3.25)); +#104366 = CARTESIAN_POINT('',(0.956727006963,1.335160874963,3.251)); +#104367 = CARTESIAN_POINT('',(0.956727006963,1.335160874963,3.25)); +#104368 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#104369 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.25)); +#104370 = ADVANCED_FACE('',(#104371),#104382,.F.); +#104371 = FACE_BOUND('',#104372,.F.); +#104372 = EDGE_LOOP('',(#104373,#104374,#104375,#104381)); +#104373 = ORIENTED_EDGE('',*,*,#104355,.F.); +#104374 = ORIENTED_EDGE('',*,*,#103530,.T.); +#104375 = ORIENTED_EDGE('',*,*,#104376,.T.); +#104376 = EDGE_CURVE('',#103531,#103839,#104377,.T.); +#104377 = LINE('',#104378,#104379); +#104378 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#104379 = VECTOR('',#104380,1.); +#104380 = DIRECTION('',(-0.,-0.,-1.)); +#104381 = ORIENTED_EDGE('',*,*,#103847,.F.); +#104382 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104383,#104384) + ,(#104385,#104386) + ,(#104387,#104388) + ,(#104389,#104390 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104383 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.251)); +#104384 = CARTESIAN_POINT('',(1.021796429639,1.335160874963,3.25)); +#104385 = CARTESIAN_POINT('',(1.115062626963,1.335160874963,3.251)); +#104386 = CARTESIAN_POINT('',(1.115062626963,1.335160874963,3.25)); +#104387 = CARTESIAN_POINT('',(1.195314890107,1.395892319578,3.251)); +#104388 = CARTESIAN_POINT('',(1.195314890107,1.395892319578,3.25)); +#104389 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#104390 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.25)); +#104391 = ADVANCED_FACE('',(#104392),#104403,.F.); +#104392 = FACE_BOUND('',#104393,.F.); +#104393 = EDGE_LOOP('',(#104394,#104395,#104396,#104402)); +#104394 = ORIENTED_EDGE('',*,*,#104376,.F.); +#104395 = ORIENTED_EDGE('',*,*,#103539,.T.); +#104396 = ORIENTED_EDGE('',*,*,#104397,.T.); +#104397 = EDGE_CURVE('',#103540,#103830,#104398,.T.); +#104398 = LINE('',#104399,#104400); +#104399 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#104400 = VECTOR('',#104401,1.); +#104401 = DIRECTION('',(-0.,-0.,-1.)); +#104402 = ORIENTED_EDGE('',*,*,#103838,.F.); +#104403 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104404,#104405) + ,(#104406,#104407) + ,(#104408,#104409) + ,(#104410,#104411 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104404 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.251)); +#104405 = CARTESIAN_POINT('',(1.225680612416,1.478313613123,3.25)); +#104406 = CARTESIAN_POINT('',(1.301594938871,1.443609912757,3.251)); +#104407 = CARTESIAN_POINT('',(1.301594938871,1.443609912757,3.25)); +#104408 = CARTESIAN_POINT('',(1.355819457768,1.367695586302,3.251)); +#104409 = CARTESIAN_POINT('',(1.355819457768,1.367695586302,3.25)); +#104410 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#104411 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.25)); +#104412 = ADVANCED_FACE('',(#104413),#104424,.F.); +#104413 = FACE_BOUND('',#104414,.F.); +#104414 = EDGE_LOOP('',(#104415,#104416,#104417,#104423)); +#104415 = ORIENTED_EDGE('',*,*,#104397,.F.); +#104416 = ORIENTED_EDGE('',*,*,#103548,.T.); +#104417 = ORIENTED_EDGE('',*,*,#104418,.T.); +#104418 = EDGE_CURVE('',#103549,#103821,#104419,.T.); +#104419 = LINE('',#104420,#104421); +#104420 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#104421 = VECTOR('',#104422,1.); +#104422 = DIRECTION('',(-0.,-0.,-1.)); +#104423 = ORIENTED_EDGE('',*,*,#103829,.F.); +#104424 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104425,#104426) + ,(#104427,#104428) + ,(#104429,#104430) + ,(#104431,#104432 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104425 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.251)); +#104426 = CARTESIAN_POINT('',(1.355819457768,1.278767367037,3.25)); +#104427 = CARTESIAN_POINT('',(1.355819457768,1.159473425464,3.251)); +#104428 = CARTESIAN_POINT('',(1.355819457768,1.159473425464,3.25)); +#104429 = CARTESIAN_POINT('',(1.258215323754,1.061869291451,3.251)); +#104430 = CARTESIAN_POINT('',(1.258215323754,1.061869291451,3.25)); +#104431 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#104432 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.25)); +#104433 = ADVANCED_FACE('',(#104434),#104445,.F.); +#104434 = FACE_BOUND('',#104435,.F.); +#104435 = EDGE_LOOP('',(#104436,#104437,#104438,#104444)); +#104436 = ORIENTED_EDGE('',*,*,#104418,.F.); +#104437 = ORIENTED_EDGE('',*,*,#103557,.T.); +#104438 = ORIENTED_EDGE('',*,*,#104439,.T.); +#104439 = EDGE_CURVE('',#103558,#103812,#104440,.T.); +#104440 = LINE('',#104441,#104442); +#104441 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#104442 = VECTOR('',#104443,1.); +#104443 = DIRECTION('',(-0.,-0.,-1.)); +#104444 = ORIENTED_EDGE('',*,*,#103820,.F.); +#104445 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104446,#104447) + ,(#104448,#104449) + ,(#104450,#104451) + ,(#104452,#104453 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104446 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.251)); +#104447 = CARTESIAN_POINT('',(1.138921382182,1.061869291451,3.25)); +#104448 = CARTESIAN_POINT('',(1.097710756094,1.061869291451,3.251)); +#104449 = CARTESIAN_POINT('',(1.097710756094,1.061869291451,3.25)); +#104450 = CARTESIAN_POINT('',(1.056500130006,1.074883184259,3.251)); +#104451 = CARTESIAN_POINT('',(1.056500130006,1.074883184259,3.25)); +#104452 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#104453 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.25)); +#104454 = ADVANCED_FACE('',(#104455),#104466,.F.); +#104455 = FACE_BOUND('',#104456,.F.); +#104456 = EDGE_LOOP('',(#104457,#104458,#104459,#104465)); +#104457 = ORIENTED_EDGE('',*,*,#104439,.F.); +#104458 = ORIENTED_EDGE('',*,*,#103566,.T.); +#104459 = ORIENTED_EDGE('',*,*,#104460,.T.); +#104460 = EDGE_CURVE('',#103567,#103803,#104461,.T.); +#104461 = LINE('',#104462,#104463); +#104462 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#104463 = VECTOR('',#104464,1.); +#104464 = DIRECTION('',(-0.,-0.,-1.)); +#104465 = ORIENTED_EDGE('',*,*,#103811,.F.); +#104466 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104467,#104468) + ,(#104469,#104470) + ,(#104471,#104472) + ,(#104473,#104474 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(20.,21.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104467 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.251)); +#104468 = CARTESIAN_POINT('',(1.023965418669,1.09440400279,3.25)); +#104469 = CARTESIAN_POINT('',(0.982754833952,0.972941196296,3.251)); +#104470 = CARTESIAN_POINT('',(0.982754833952,0.972941196296,3.25)); +#104471 = CARTESIAN_POINT('',(0.869967818099,0.886181966062,3.251)); +#104472 = CARTESIAN_POINT('',(0.869967818099,0.886181966062,3.25)); +#104473 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#104474 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.25)); +#104475 = ADVANCED_FACE('',(#104476),#104487,.F.); +#104476 = FACE_BOUND('',#104477,.F.); +#104477 = EDGE_LOOP('',(#104478,#104479,#104480,#104486)); +#104478 = ORIENTED_EDGE('',*,*,#104460,.F.); +#104479 = ORIENTED_EDGE('',*,*,#103575,.T.); +#104480 = ORIENTED_EDGE('',*,*,#104481,.T.); +#104481 = EDGE_CURVE('',#103576,#103794,#104482,.T.); +#104482 = LINE('',#104483,#104484); +#104483 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#104484 = VECTOR('',#104485,1.); +#104485 = DIRECTION('',(-0.,-0.,-1.)); +#104486 = ORIENTED_EDGE('',*,*,#103802,.F.); +#104487 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104488,#104489) + ,(#104490,#104491) + ,(#104492,#104493) + ,(#104494,#104495 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(21.,22.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104488 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.251)); +#104489 = CARTESIAN_POINT('',(0.733322047027,0.886181966062,3.25)); +#104490 = CARTESIAN_POINT('',(0.577155416057,0.886181966062,3.251)); +#104491 = CARTESIAN_POINT('',(0.577155416057,0.886181966062,3.25)); +#104492 = CARTESIAN_POINT('',(0.447016570706,1.005475907635,3.251)); +#104493 = CARTESIAN_POINT('',(0.447016570706,1.005475907635,3.25)); +#104494 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#104495 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.25)); +#104496 = ADVANCED_FACE('',(#104497),#104508,.F.); +#104497 = FACE_BOUND('',#104498,.T.); +#104498 = EDGE_LOOP('',(#104499,#104500,#104506,#104507)); +#104499 = ORIENTED_EDGE('',*,*,#103793,.T.); +#104500 = ORIENTED_EDGE('',*,*,#104501,.F.); +#104501 = EDGE_CURVE('',#103585,#103785,#104502,.T.); +#104502 = LINE('',#104503,#104504); +#104503 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.251)); +#104504 = VECTOR('',#104505,1.); +#104505 = DIRECTION('',(-0.,-0.,-1.)); +#104506 = ORIENTED_EDGE('',*,*,#103584,.F.); +#104507 = ORIENTED_EDGE('',*,*,#104481,.T.); +#104508 = PLANE('',#104509); +#104509 = AXIS2_PLACEMENT_3D('',#104510,#104511,#104512); +#104510 = CARTESIAN_POINT('',(0.429664741207,1.157304560545,3.251)); +#104511 = DIRECTION('',(1.249669001805E-14,-1.,0.)); +#104512 = DIRECTION('',(1.,1.249669001805E-14,0.)); +#104513 = ADVANCED_FACE('',(#104514),#104525,.F.); +#104514 = FACE_BOUND('',#104515,.F.); +#104515 = EDGE_LOOP('',(#104516,#104517,#104518,#104524)); +#104516 = ORIENTED_EDGE('',*,*,#104501,.F.); +#104517 = ORIENTED_EDGE('',*,*,#103593,.T.); +#104518 = ORIENTED_EDGE('',*,*,#104519,.T.); +#104519 = EDGE_CURVE('',#103594,#103776,#104520,.T.); +#104520 = LINE('',#104521,#104522); +#104521 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#104522 = VECTOR('',#104523,1.); +#104523 = DIRECTION('',(-0.,-0.,-1.)); +#104524 = ORIENTED_EDGE('',*,*,#103784,.F.); +#104525 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104526,#104527) + ,(#104528,#104529) + ,(#104530,#104531) + ,(#104532,#104533 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(23.,24.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104526 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.251)); +#104527 = CARTESIAN_POINT('',(0.412312911708,1.157304560545,3.25)); +#104528 = CARTESIAN_POINT('',(0.319046755754,1.157304560545,3.251)); +#104529 = CARTESIAN_POINT('',(0.319046755754,1.157304560545,3.25)); +#104530 = CARTESIAN_POINT('',(0.243132429299,1.233218886999,3.251)); +#104531 = CARTESIAN_POINT('',(0.243132429299,1.233218886999,3.25)); +#104532 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#104533 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.25)); +#104534 = ADVANCED_FACE('',(#104535),#104546,.F.); +#104535 = FACE_BOUND('',#104536,.F.); +#104536 = EDGE_LOOP('',(#104537,#104538,#104539,#104545)); +#104537 = ORIENTED_EDGE('',*,*,#104519,.F.); +#104538 = ORIENTED_EDGE('',*,*,#103602,.T.); +#104539 = ORIENTED_EDGE('',*,*,#104540,.T.); +#104540 = EDGE_CURVE('',#103603,#103768,#104541,.T.); +#104541 = LINE('',#104542,#104543); +#104542 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#104543 = VECTOR('',#104544,1.); +#104544 = DIRECTION('',(-0.,-0.,-1.)); +#104545 = ORIENTED_EDGE('',*,*,#103775,.F.); +#104546 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104547,#104548) + ,(#104549,#104550) + ,(#104551,#104552) + ,(#104553,#104554 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(24.,25.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104547 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.251)); +#104548 = CARTESIAN_POINT('',(0.243132429299,1.326485042953,3.25)); +#104549 = CARTESIAN_POINT('',(0.243132429299,1.415413262219,3.251)); +#104550 = CARTESIAN_POINT('',(0.243132429299,1.415413262219,3.25)); +#104551 = CARTESIAN_POINT('',(0.310370799635,1.489158599642,3.251)); +#104552 = CARTESIAN_POINT('',(0.310370799635,1.489158599642,3.25)); +#104553 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#104554 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.25)); +#104555 = ADVANCED_FACE('',(#104556),#104567,.F.); +#104556 = FACE_BOUND('',#104557,.T.); +#104557 = EDGE_LOOP('',(#104558,#104559,#104565,#104566)); +#104558 = ORIENTED_EDGE('',*,*,#103767,.T.); +#104559 = ORIENTED_EDGE('',*,*,#104560,.F.); +#104560 = EDGE_CURVE('',#103612,#103759,#104561,.T.); +#104561 = LINE('',#104562,#104563); +#104562 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.251)); +#104563 = VECTOR('',#104564,1.); +#104564 = DIRECTION('',(-0.,-0.,-1.)); +#104565 = ORIENTED_EDGE('',*,*,#103611,.F.); +#104566 = ORIENTED_EDGE('',*,*,#104540,.T.); +#104567 = PLANE('',#104568); +#104568 = AXIS2_PLACEMENT_3D('',#104569,#104570,#104571); +#104569 = CARTESIAN_POINT('',(0.399299060269,1.495665525362,3.251)); +#104570 = DIRECTION('',(-6.664894986924E-15,1.,0.)); +#104571 = DIRECTION('',(-1.,-6.664894986924E-15,0.)); +#104572 = ADVANCED_FACE('',(#104573),#104584,.F.); +#104573 = FACE_BOUND('',#104574,.F.); +#104574 = EDGE_LOOP('',(#104575,#104576,#104577,#104583)); +#104575 = ORIENTED_EDGE('',*,*,#104560,.F.); +#104576 = ORIENTED_EDGE('',*,*,#103619,.T.); +#104577 = ORIENTED_EDGE('',*,*,#104578,.T.); +#104578 = EDGE_CURVE('',#103620,#103750,#104579,.T.); +#104579 = LINE('',#104580,#104581); +#104580 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#104581 = VECTOR('',#104582,1.); +#104582 = DIRECTION('',(-0.,-0.,-1.)); +#104583 = ORIENTED_EDGE('',*,*,#103758,.F.); +#104584 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104585,#104586) + ,(#104587,#104588) + ,(#104589,#104590) + ,(#104591,#104592 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(26.,27.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104585 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.251)); +#104586 = CARTESIAN_POINT('',(0.496903194282,1.495665525362,3.25)); +#104587 = CARTESIAN_POINT('',(0.501241172342,1.495665525362,3.251)); +#104588 = CARTESIAN_POINT('',(0.501241172342,1.495665525362,3.25)); +#104589 = CARTESIAN_POINT('',(0.505579150402,1.493496577703,3.251)); +#104590 = CARTESIAN_POINT('',(0.505579150402,1.493496577703,3.25)); +#104591 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#104592 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.25)); +#104593 = ADVANCED_FACE('',(#104594),#104605,.F.); +#104594 = FACE_BOUND('',#104595,.F.); +#104595 = EDGE_LOOP('',(#104596,#104597,#104598,#104604)); +#104596 = ORIENTED_EDGE('',*,*,#104578,.F.); +#104597 = ORIENTED_EDGE('',*,*,#103628,.T.); +#104598 = ORIENTED_EDGE('',*,*,#104599,.T.); +#104599 = EDGE_CURVE('',#103629,#103741,#104600,.T.); +#104600 = LINE('',#104601,#104602); +#104601 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#104602 = VECTOR('',#104603,1.); +#104603 = DIRECTION('',(-0.,-0.,-1.)); +#104604 = ORIENTED_EDGE('',*,*,#103749,.F.); +#104605 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104606,#104607) + ,(#104608,#104609) + ,(#104610,#104611) + ,(#104612,#104613 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(27.,28.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104606 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.251)); +#104607 = CARTESIAN_POINT('',(0.509917045722,1.493496577703,3.25)); +#104608 = CARTESIAN_POINT('',(0.546789735119,1.493496577703,3.251)); +#104609 = CARTESIAN_POINT('',(0.546789735119,1.493496577703,3.25)); +#104610 = CARTESIAN_POINT('',(0.577155416057,1.52386234138,3.251)); +#104611 = CARTESIAN_POINT('',(0.577155416057,1.52386234138,3.25)); +#104612 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#104613 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.25)); +#104614 = ADVANCED_FACE('',(#104615),#104626,.F.); +#104615 = FACE_BOUND('',#104616,.F.); +#104616 = EDGE_LOOP('',(#104617,#104618,#104619,#104625)); +#104617 = ORIENTED_EDGE('',*,*,#104599,.F.); +#104618 = ORIENTED_EDGE('',*,*,#103637,.T.); +#104619 = ORIENTED_EDGE('',*,*,#104620,.T.); +#104620 = EDGE_CURVE('',#103638,#103733,#104621,.T.); +#104621 = LINE('',#104622,#104623); +#104622 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.251)); +#104623 = VECTOR('',#104624,1.); +#104624 = DIRECTION('',(-0.,-0.,-1.)); +#104625 = ORIENTED_EDGE('',*,*,#103740,.F.); +#104626 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104627,#104628) + ,(#104629,#104630) + ,(#104631,#104632) + ,(#104633,#104634 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(28.,29.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104627 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.251)); +#104628 = CARTESIAN_POINT('',(0.577155416057,1.560734948038,3.25)); +#104629 = CARTESIAN_POINT('',(0.577155416057,1.595438607036,3.251)); +#104630 = CARTESIAN_POINT('',(0.577155416057,1.595438607036,3.25)); +#104631 = CARTESIAN_POINT('',(0.54895868278,1.625804370716,3.251)); +#104632 = CARTESIAN_POINT('',(0.54895868278,1.625804370716,3.25)); +#104633 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.251)); +#104634 = CARTESIAN_POINT('',(0.514254941041,1.627973318375,3.25)); +#104635 = ADVANCED_FACE('',(#104636),#104647,.F.); +#104636 = FACE_BOUND('',#104637,.T.); +#104637 = EDGE_LOOP('',(#104638,#104639,#104645,#104646)); +#104638 = ORIENTED_EDGE('',*,*,#103732,.T.); +#104639 = ORIENTED_EDGE('',*,*,#104640,.F.); +#104640 = EDGE_CURVE('',#103647,#103724,#104641,.T.); +#104641 = LINE('',#104642,#104643); +#104642 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.251)); +#104643 = VECTOR('',#104644,1.); +#104644 = DIRECTION('',(-0.,-0.,-1.)); +#104645 = ORIENTED_EDGE('',*,*,#103646,.F.); +#104646 = ORIENTED_EDGE('',*,*,#104620,.T.); +#104647 = PLANE('',#104648); +#104648 = AXIS2_PLACEMENT_3D('',#104649,#104650,#104651); +#104649 = CARTESIAN_POINT('',(0.392792051809,1.627973318375,3.251)); +#104650 = DIRECTION('',(0.,-1.,0.)); +#104651 = DIRECTION('',(0.,-0.,-1.)); +#104652 = ADVANCED_FACE('',(#104653),#104664,.F.); +#104653 = FACE_BOUND('',#104654,.F.); +#104654 = EDGE_LOOP('',(#104655,#104656,#104657,#104663)); +#104655 = ORIENTED_EDGE('',*,*,#104640,.F.); +#104656 = ORIENTED_EDGE('',*,*,#103654,.T.); +#104657 = ORIENTED_EDGE('',*,*,#104658,.T.); +#104658 = EDGE_CURVE('',#103655,#103715,#104659,.T.); +#104659 = LINE('',#104660,#104661); +#104660 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#104661 = VECTOR('',#104662,1.); +#104662 = DIRECTION('',(-0.,-0.,-1.)); +#104663 = ORIENTED_EDGE('',*,*,#103723,.F.); +#104664 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104665,#104666) + ,(#104667,#104668) + ,(#104669,#104670) + ,(#104671,#104672 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(33.,34.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104665 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.251)); +#104666 = CARTESIAN_POINT('',(0.386285126089,1.627973318375,3.25)); +#104667 = CARTESIAN_POINT('',(0.310370799635,1.621466392655,3.251)); +#104668 = CARTESIAN_POINT('',(0.310370799635,1.621466392655,3.25)); +#104669 = CARTESIAN_POINT('',(0.240963398899,1.586762650917,3.251)); +#104670 = CARTESIAN_POINT('',(0.240963398899,1.586762650917,3.25)); +#104671 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#104672 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.25)); +#104673 = ADVANCED_FACE('',(#104674),#104680,.F.); +#104674 = FACE_BOUND('',#104675,.F.); +#104675 = EDGE_LOOP('',(#104676,#104677,#104678,#104679)); +#104676 = ORIENTED_EDGE('',*,*,#104658,.F.); +#104677 = ORIENTED_EDGE('',*,*,#103663,.T.); +#104678 = ORIENTED_EDGE('',*,*,#104028,.T.); +#104679 = ORIENTED_EDGE('',*,*,#103714,.F.); +#104680 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104681,#104682) + ,(#104683,#104684) + ,(#104685,#104686) + ,(#104687,#104688 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(34.,35.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104681 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.251)); +#104682 = CARTESIAN_POINT('',(0.188907910403,1.53036918436,3.25)); +#104683 = CARTESIAN_POINT('',(0.136852339166,1.473975717804,3.251)); +#104684 = CARTESIAN_POINT('',(0.136852339166,1.473975717804,3.25)); +#104685 = CARTESIAN_POINT('',(0.108655605888,1.400230339009,3.251)); +#104686 = CARTESIAN_POINT('',(0.108655605888,1.400230339009,3.25)); +#104687 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.251)); +#104688 = CARTESIAN_POINT('',(0.108655605888,1.324316012554,3.25)); +#104689 = ADVANCED_FACE('',(#104690),#104706,.T.); +#104690 = FACE_BOUND('',#104691,.T.); +#104691 = EDGE_LOOP('',(#104692,#104693,#104699,#104700)); +#104692 = ORIENTED_EDGE('',*,*,#104010,.F.); +#104693 = ORIENTED_EDGE('',*,*,#104694,.F.); +#104694 = EDGE_CURVE('',#103673,#104000,#104695,.T.); +#104695 = LINE('',#104696,#104697); +#104696 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#104697 = VECTOR('',#104698,1.); +#104698 = DIRECTION('',(-0.,-0.,-1.)); +#104699 = ORIENTED_EDGE('',*,*,#103672,.T.); +#104700 = ORIENTED_EDGE('',*,*,#104701,.T.); +#104701 = EDGE_CURVE('',#103675,#103998,#104702,.T.); +#104702 = LINE('',#104703,#104704); +#104703 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#104704 = VECTOR('',#104705,1.); +#104705 = DIRECTION('',(-0.,-0.,-1.)); +#104706 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104707,#104708) + ,(#104709,#104710) + ,(#104711,#104712) + ,(#104713,#104714) + ,(#104715,#104716) + ,(#104717,#104718) + ,(#104719,#104720 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,3,4),(2,2),(0.,1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#104707 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#104708 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.25)); +#104709 = CARTESIAN_POINT('',(0.976247908233,1.640987335294,3.251)); +#104710 = CARTESIAN_POINT('',(0.976247908233,1.640987335294,3.25)); +#104711 = CARTESIAN_POINT('',(0.939375218835,1.601945615496,3.251)); +#104712 = CARTESIAN_POINT('',(0.939375218835,1.601945615496,3.25)); +#104713 = CARTESIAN_POINT('',(0.939375218835,1.556397052719,3.251)); +#104714 = CARTESIAN_POINT('',(0.939375218835,1.556397052719,3.25)); +#104715 = CARTESIAN_POINT('',(0.939375218835,1.508679459543,3.251)); +#104716 = CARTESIAN_POINT('',(0.939375218835,1.508679459543,3.25)); +#104717 = CARTESIAN_POINT('',(0.978416855892,1.471806770145,3.251)); +#104718 = CARTESIAN_POINT('',(0.978416855892,1.471806770145,3.25)); +#104719 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#104720 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.25)); +#104721 = ADVANCED_FACE('',(#104722),#104728,.T.); +#104722 = FACE_BOUND('',#104723,.T.); +#104723 = EDGE_LOOP('',(#104724,#104725,#104726,#104727)); +#104724 = ORIENTED_EDGE('',*,*,#103997,.F.); +#104725 = ORIENTED_EDGE('',*,*,#104701,.F.); +#104726 = ORIENTED_EDGE('',*,*,#103686,.T.); +#104727 = ORIENTED_EDGE('',*,*,#104694,.T.); +#104728 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#104729,#104730) + ,(#104731,#104732) + ,(#104733,#104734) + ,(#104735,#104736) + ,(#104737,#104738) + ,(#104739,#104740 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,2,4),(2,2),(2.,3.,4.),(0.,1.), + .UNSPECIFIED.); +#104729 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.251)); +#104730 = CARTESIAN_POINT('',(1.023965460039,1.471806770145,3.25)); +#104731 = CARTESIAN_POINT('',(1.069514064185,1.471806770145,3.251)); +#104732 = CARTESIAN_POINT('',(1.069514064185,1.471806770145,3.25)); +#104733 = CARTESIAN_POINT('',(1.108555701244,1.508679459543,3.251)); +#104734 = CARTESIAN_POINT('',(1.108555701244,1.508679459543,3.25)); +#104735 = CARTESIAN_POINT('',(1.108555701244,1.604114645896,3.251)); +#104736 = CARTESIAN_POINT('',(1.108555701244,1.604114645896,3.25)); +#104737 = CARTESIAN_POINT('',(1.069514064185,1.640987335294,3.251)); +#104738 = CARTESIAN_POINT('',(1.069514064185,1.640987335294,3.25)); +#104739 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.251)); +#104740 = CARTESIAN_POINT('',(1.023965460039,1.640987335294,3.25)); +#104741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#104745)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#104742,#104743,#104744)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#104742 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#104743 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#104744 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#104745 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-07),#104742, + 'distance_accuracy_value','confusion accuracy'); +#104746 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#104747,#104749); +#104747 = ( REPRESENTATION_RELATIONSHIP('','',#79408,#79385) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#104748) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#104748 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79386); +#104749 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #104750); +#104750 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','=>[0:1:1:28]','',#79380, + #79403,$); +#104751 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#79405)); +#104752 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#104753,#104755); +#104753 = ( REPRESENTATION_RELATIONSHIP('','',#73044,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#104754) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#104754 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#104755 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #104756); +#104756 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','C_XBEE_VCC2','',#5,#73039 + ,$); +#104757 = SHAPE_DEFINITION_REPRESENTATION(#104758,#104764); +#104758 = PRODUCT_DEFINITION_SHAPE('','',#104759); +#104759 = PRODUCT_DEFINITION('design','',#104760,#104763); +#104760 = PRODUCT_DEFINITION_FORMATION('','',#104761); +#104761 = PRODUCT('Thumbstick_ALPS_RKJXV1224005', + 'Thumbstick_ALPS_RKJXV1224005','',(#104762)); +#104762 = PRODUCT_CONTEXT('',#2,'mechanical'); +#104763 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#104764 = SHAPE_REPRESENTATION('',(#11,#104765),#104769); +#104765 = AXIS2_PLACEMENT_3D('',#104766,#104767,#104768); +#104766 = CARTESIAN_POINT('',(0.,0.,0.)); +#104767 = DIRECTION('',(0.,0.,1.)); +#104768 = DIRECTION('',(1.,0.,-0.)); +#104769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#104773)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#104770,#104771,#104772)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#104770 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#104771 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#104772 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#104773 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-06),#104770, + 'distance_accuracy_value','confusion accuracy'); +#104774 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#104775,#104777); +#104775 = ( REPRESENTATION_RELATIONSHIP('','',#104764,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#104776) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#104776 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#104777 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #104778); +#104778 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','J_STICK1','',#5,#104759,$ + ); +#104779 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#104761)); +#104780 = SHAPE_DEFINITION_REPRESENTATION(#104781,#104787); +#104781 = PRODUCT_DEFINITION_SHAPE('','',#104782); +#104782 = PRODUCT_DEFINITION('design','',#104783,#104786); +#104783 = PRODUCT_DEFINITION_FORMATION('','',#104784); +#104784 = PRODUCT('SW-TH_RKJXV1224005','SW-TH_RKJXV1224005','',(#104785) + ); +#104785 = PRODUCT_CONTEXT('',#2,'mechanical'); +#104786 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#104787 = SHAPE_REPRESENTATION('',(#11,#104788,#121033,#128546,#136059, + #147581,#147871,#148087,#148639,#149053,#149585,#150081,#150495, + #151327,#152152,#152695,#153109,#153641,#154137),#155506); +#104788 = MANIFOLD_SOLID_BREP('',#104789); +#104789 = CLOSED_SHELL('',(#104790,#105430,#105462,#105480,#106040, + #106062,#106074,#106096,#106108,#106130,#106142,#106164,#106176, + #106215,#106232,#106249,#106266,#106300,#106630,#106661,#106813, + #106909,#107013,#108857,#108893,#108917,#108946,#108975,#109004, + #109033,#109062,#109091,#109120,#109149,#109173,#109202,#109231, + #109260,#109289,#109318,#109347,#109369,#109395,#109499,#109731, + #109795,#110157,#110621,#111121,#111143,#111160,#111177,#111194, + #111211,#111228,#111245,#111262,#111279,#111296,#111313,#111325, + #111347,#111364,#111381,#111398,#111415,#111432,#111449,#111466, + #111483,#111500,#111517,#111534,#111551,#111568,#111585,#111602, + #111619,#111636,#111653,#111670,#111687,#111704,#111721,#111738, + #111755,#111772,#111789,#111801,#111823,#111840,#111857,#111874, + #111891,#111908,#111920,#111942,#111959,#111976,#111993,#112010, + #112027,#112044,#112061,#112078,#112095,#112112,#112129,#112146, + #112163,#112180,#112197,#112214,#112231,#112248,#112265,#112282, + #112299,#112316,#112333,#112350,#112362,#112384,#112401,#112418, + #112435,#112452,#112469,#112486,#112503,#112520,#112537,#112554, + #112571,#112588,#112605,#112622,#112639,#112656,#112668,#112690, + #112707,#112724,#112741,#112758,#112775,#112792,#112809,#112826, + #112843,#112860,#112877,#112894,#112911,#112928,#112945,#112962, + #112979,#112996,#113013,#113030,#113047,#113064,#113081,#113098, + #113115,#113132,#113149,#113166,#113183,#113200,#113217,#113234, + #113251,#113268,#113285,#113302,#113319,#113336,#113353,#113370, + #113387,#113404,#113421,#113438,#113455,#113472,#113489,#113506, + #113523,#113540,#113557,#113574,#113591,#113608,#113625,#113637, + #113659,#113676,#113693,#113710,#113727,#113744,#113761,#113778, + #113795,#113812,#113829,#113846,#113863,#113880,#113897,#113914, + #113931,#113948,#113965,#113982,#113999,#114016,#114033,#114050, + #114067,#114084,#114101,#114118,#114135,#114152,#114169,#114186, + #114203,#114220,#114237,#114254,#114271,#114283,#114305,#114322, + #114339,#114356,#114373,#114390,#114407,#114424,#114441,#114458, + #114470,#114492,#114509,#114526,#114543,#114560,#114577,#114594, + #114611,#114628,#114645,#114662,#114674,#114691,#114708,#114725, + #114742,#114759,#114776,#114793,#114810,#114827,#114844,#114861, + #114883,#114900,#114917,#114934,#114951,#114968,#114980,#114997, + #115014,#115031,#115048,#115065,#115077,#115094,#115111,#115128, + #115145,#115162,#115174,#115212,#115248,#115294,#115312,#115329, + #115351,#115364,#115382,#115401,#115418,#115435,#115452,#115471, + #115484,#115518,#115571,#115624,#115659,#115690,#115707,#115724, + #115741,#115767,#115801,#115832,#115872,#115897,#116142,#116173, + #116461,#116483,#116505,#116517,#116534,#116551,#116593,#116626, + #116675,#116709,#116741,#116765,#116790,#116824,#116849,#116866, + #116888,#116905,#116922,#116939,#116956,#116973,#116985,#117012, + #117046,#117071,#117088,#117114,#117133,#117152,#117172,#117184, + #117197,#117214,#117231,#117248,#117265,#117282,#117294,#117311, + #117323,#117347,#117364,#117381,#117398,#117417,#117430,#117443, + #117467,#117514,#117567,#117602,#117633,#117650,#117667,#117684, + #117710,#117744,#117775,#117815,#117840,#118137,#118168,#118193, + #118491,#118503,#118520,#118537,#118554,#118576,#118593,#118615, + #118637,#118654,#118671,#118688,#118705,#118722,#118739,#118751, + #118768,#118785,#118802,#118819,#118836,#118848,#118865,#118882, + #118899,#118916,#118933,#118950,#118962,#118979,#118996,#119008, + #119032,#119049,#119066,#119083,#119102,#119115,#119128,#119158, + #119215,#119268,#119303,#119334,#119351,#119368,#119385,#119411, + #119445,#119476,#119516,#119541,#119770,#119801,#119825,#119849, + #119873,#119897,#120141,#120158,#120200,#120233,#120274,#120332, + #120361,#120383,#120400,#120422,#120439,#120456,#120473,#120490, + #120507,#120519,#120546,#120571,#120597,#120622,#120646,#120671, + #120696,#120708,#120742,#120756,#120773,#120790,#120804,#120821, + #120838,#120855,#120872,#120889,#120901,#120925,#120942,#120959, + #120976,#120995,#121008,#121021)); +#104790 = ADVANCED_FACE('',(#104791,#105325,#105345,#105365,#105385, + #105405),#105425,.F.); +#104791 = FACE_BOUND('',#104792,.T.); +#104792 = EDGE_LOOP('',(#104793,#104804,#104812,#104820,#104828,#104837, + #104845,#104853,#104861,#104870,#104878,#104887,#104895,#104903, + #104911,#104920,#104928,#104937,#104945,#104953,#104961,#104970, + #104978,#104986,#104994,#105003,#105011,#105020,#105028,#105036, + #105044,#105053,#105061,#105070,#105078,#105086,#105094,#105103, + #105111,#105119,#105127,#105136,#105144,#105153,#105161,#105169, + #105177,#105186,#105194,#105203,#105211,#105219,#105227,#105236, + #105244,#105252,#105260,#105269,#105277,#105286,#105294,#105302, + #105310,#105319)); +#104793 = ORIENTED_EDGE('',*,*,#104794,.T.); +#104794 = EDGE_CURVE('',#104795,#104797,#104799,.T.); +#104795 = VERTEX_POINT('',#104796); +#104796 = CARTESIAN_POINT('',(-5.775,4.15,0.)); +#104797 = VERTEX_POINT('',#104798); +#104798 = CARTESIAN_POINT('',(-5.925,4.3,0.)); +#104799 = CIRCLE('',#104800,0.15); +#104800 = AXIS2_PLACEMENT_3D('',#104801,#104802,#104803); +#104801 = CARTESIAN_POINT('',(-5.925,4.15,0.)); +#104802 = DIRECTION('',(0.,0.,1.)); +#104803 = DIRECTION('',(1.,0.,-0.)); +#104804 = ORIENTED_EDGE('',*,*,#104805,.F.); +#104805 = EDGE_CURVE('',#104806,#104797,#104808,.T.); +#104806 = VERTEX_POINT('',#104807); +#104807 = CARTESIAN_POINT('',(-6.075,4.3,0.)); +#104808 = LINE('',#104809,#104810); +#104809 = CARTESIAN_POINT('',(-6.075,4.3,0.)); +#104810 = VECTOR('',#104811,1.); +#104811 = DIRECTION('',(1.,0.,0.)); +#104812 = ORIENTED_EDGE('',*,*,#104813,.T.); +#104813 = EDGE_CURVE('',#104806,#104814,#104816,.T.); +#104814 = VERTEX_POINT('',#104815); +#104815 = CARTESIAN_POINT('',(-6.075,5.575,0.)); +#104816 = LINE('',#104817,#104818); +#104817 = CARTESIAN_POINT('',(-6.075,4.3,0.)); +#104818 = VECTOR('',#104819,1.); +#104819 = DIRECTION('',(0.,1.,0.)); +#104820 = ORIENTED_EDGE('',*,*,#104821,.F.); +#104821 = EDGE_CURVE('',#104822,#104814,#104824,.T.); +#104822 = VERTEX_POINT('',#104823); +#104823 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#104824 = LINE('',#104825,#104826); +#104825 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#104826 = VECTOR('',#104827,1.); +#104827 = DIRECTION('',(1.,0.,0.)); +#104828 = ORIENTED_EDGE('',*,*,#104829,.F.); +#104829 = EDGE_CURVE('',#104830,#104822,#104832,.T.); +#104830 = VERTEX_POINT('',#104831); +#104831 = CARTESIAN_POINT('',(-5.575,6.575,0.)); +#104832 = CIRCLE('',#104833,1.); +#104833 = AXIS2_PLACEMENT_3D('',#104834,#104835,#104836); +#104834 = CARTESIAN_POINT('',(-6.575,6.575,0.)); +#104835 = DIRECTION('',(0.,0.,-1.)); +#104836 = DIRECTION('',(1.,0.,0.)); +#104837 = ORIENTED_EDGE('',*,*,#104838,.T.); +#104838 = EDGE_CURVE('',#104830,#104839,#104841,.T.); +#104839 = VERTEX_POINT('',#104840); +#104840 = CARTESIAN_POINT('',(-5.575,6.075,0.)); +#104841 = LINE('',#104842,#104843); +#104842 = CARTESIAN_POINT('',(-5.575,6.575,0.)); +#104843 = VECTOR('',#104844,1.); +#104844 = DIRECTION('',(0.,-1.,0.)); +#104845 = ORIENTED_EDGE('',*,*,#104846,.T.); +#104846 = EDGE_CURVE('',#104839,#104847,#104849,.T.); +#104847 = VERTEX_POINT('',#104848); +#104848 = CARTESIAN_POINT('',(-4.3,6.075,0.)); +#104849 = LINE('',#104850,#104851); +#104850 = CARTESIAN_POINT('',(-5.575,6.075,0.)); +#104851 = VECTOR('',#104852,1.); +#104852 = DIRECTION('',(1.,0.,0.)); +#104853 = ORIENTED_EDGE('',*,*,#104854,.T.); +#104854 = EDGE_CURVE('',#104847,#104855,#104857,.T.); +#104855 = VERTEX_POINT('',#104856); +#104856 = CARTESIAN_POINT('',(-4.3,5.925,0.)); +#104857 = LINE('',#104858,#104859); +#104858 = CARTESIAN_POINT('',(-4.3,6.075,0.)); +#104859 = VECTOR('',#104860,1.); +#104860 = DIRECTION('',(0.,-1.,0.)); +#104861 = ORIENTED_EDGE('',*,*,#104862,.T.); +#104862 = EDGE_CURVE('',#104855,#104863,#104865,.T.); +#104863 = VERTEX_POINT('',#104864); +#104864 = CARTESIAN_POINT('',(-4.15,5.775,0.)); +#104865 = CIRCLE('',#104866,0.15); +#104866 = AXIS2_PLACEMENT_3D('',#104867,#104868,#104869); +#104867 = CARTESIAN_POINT('',(-4.15,5.925,0.)); +#104868 = DIRECTION('',(0.,0.,1.)); +#104869 = DIRECTION('',(-1.,0.,0.)); +#104870 = ORIENTED_EDGE('',*,*,#104871,.T.); +#104871 = EDGE_CURVE('',#104863,#104872,#104874,.T.); +#104872 = VERTEX_POINT('',#104873); +#104873 = CARTESIAN_POINT('',(-2.95,5.775,0.)); +#104874 = LINE('',#104875,#104876); +#104875 = CARTESIAN_POINT('',(-4.15,5.775,0.)); +#104876 = VECTOR('',#104877,1.); +#104877 = DIRECTION('',(1.,0.,0.)); +#104878 = ORIENTED_EDGE('',*,*,#104879,.T.); +#104879 = EDGE_CURVE('',#104872,#104880,#104882,.T.); +#104880 = VERTEX_POINT('',#104881); +#104881 = CARTESIAN_POINT('',(-2.8,5.925,0.)); +#104882 = CIRCLE('',#104883,0.15); +#104883 = AXIS2_PLACEMENT_3D('',#104884,#104885,#104886); +#104884 = CARTESIAN_POINT('',(-2.95,5.925,0.)); +#104885 = DIRECTION('',(0.,0.,1.)); +#104886 = DIRECTION('',(0.,-1.,0.)); +#104887 = ORIENTED_EDGE('',*,*,#104888,.F.); +#104888 = EDGE_CURVE('',#104889,#104880,#104891,.T.); +#104889 = VERTEX_POINT('',#104890); +#104890 = CARTESIAN_POINT('',(-2.8,6.075,0.)); +#104891 = LINE('',#104892,#104893); +#104892 = CARTESIAN_POINT('',(-2.8,6.075,0.)); +#104893 = VECTOR('',#104894,1.); +#104894 = DIRECTION('',(-1.7763568394E-14,-1.,0.)); +#104895 = ORIENTED_EDGE('',*,*,#104896,.T.); +#104896 = EDGE_CURVE('',#104889,#104897,#104899,.T.); +#104897 = VERTEX_POINT('',#104898); +#104898 = CARTESIAN_POINT('',(2.8,6.075,0.)); +#104899 = LINE('',#104900,#104901); +#104900 = CARTESIAN_POINT('',(-2.8,6.075,0.)); +#104901 = VECTOR('',#104902,1.); +#104902 = DIRECTION('',(1.,0.,0.)); +#104903 = ORIENTED_EDGE('',*,*,#104904,.T.); +#104904 = EDGE_CURVE('',#104897,#104905,#104907,.T.); +#104905 = VERTEX_POINT('',#104906); +#104906 = CARTESIAN_POINT('',(2.8,5.925,0.)); +#104907 = LINE('',#104908,#104909); +#104908 = CARTESIAN_POINT('',(2.8,6.075,0.)); +#104909 = VECTOR('',#104910,1.); +#104910 = DIRECTION('',(0.,-1.,0.)); +#104911 = ORIENTED_EDGE('',*,*,#104912,.T.); +#104912 = EDGE_CURVE('',#104905,#104913,#104915,.T.); +#104913 = VERTEX_POINT('',#104914); +#104914 = CARTESIAN_POINT('',(2.95,5.775,0.)); +#104915 = CIRCLE('',#104916,0.15); +#104916 = AXIS2_PLACEMENT_3D('',#104917,#104918,#104919); +#104917 = CARTESIAN_POINT('',(2.95,5.925,0.)); +#104918 = DIRECTION('',(0.,0.,1.)); +#104919 = DIRECTION('',(-1.,0.,0.)); +#104920 = ORIENTED_EDGE('',*,*,#104921,.T.); +#104921 = EDGE_CURVE('',#104913,#104922,#104924,.T.); +#104922 = VERTEX_POINT('',#104923); +#104923 = CARTESIAN_POINT('',(4.15,5.775,0.)); +#104924 = LINE('',#104925,#104926); +#104925 = CARTESIAN_POINT('',(2.95,5.775,0.)); +#104926 = VECTOR('',#104927,1.); +#104927 = DIRECTION('',(1.,0.,0.)); +#104928 = ORIENTED_EDGE('',*,*,#104929,.T.); +#104929 = EDGE_CURVE('',#104922,#104930,#104932,.T.); +#104930 = VERTEX_POINT('',#104931); +#104931 = CARTESIAN_POINT('',(4.3,5.925,0.)); +#104932 = CIRCLE('',#104933,0.15); +#104933 = AXIS2_PLACEMENT_3D('',#104934,#104935,#104936); +#104934 = CARTESIAN_POINT('',(4.15,5.925,0.)); +#104935 = DIRECTION('',(0.,0.,1.)); +#104936 = DIRECTION('',(0.,-1.,0.)); +#104937 = ORIENTED_EDGE('',*,*,#104938,.F.); +#104938 = EDGE_CURVE('',#104939,#104930,#104941,.T.); +#104939 = VERTEX_POINT('',#104940); +#104940 = CARTESIAN_POINT('',(4.3,6.075,0.)); +#104941 = LINE('',#104942,#104943); +#104942 = CARTESIAN_POINT('',(4.3,6.075,0.)); +#104943 = VECTOR('',#104944,1.); +#104944 = DIRECTION('',(0.,-1.,0.)); +#104945 = ORIENTED_EDGE('',*,*,#104946,.T.); +#104946 = EDGE_CURVE('',#104939,#104947,#104949,.T.); +#104947 = VERTEX_POINT('',#104948); +#104948 = CARTESIAN_POINT('',(5.575,6.075,0.)); +#104949 = LINE('',#104950,#104951); +#104950 = CARTESIAN_POINT('',(4.3,6.075,0.)); +#104951 = VECTOR('',#104952,1.); +#104952 = DIRECTION('',(1.,0.,0.)); +#104953 = ORIENTED_EDGE('',*,*,#104954,.F.); +#104954 = EDGE_CURVE('',#104955,#104947,#104957,.T.); +#104955 = VERTEX_POINT('',#104956); +#104956 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#104957 = LINE('',#104958,#104959); +#104958 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#104959 = VECTOR('',#104960,1.); +#104960 = DIRECTION('',(0.,-1.,0.)); +#104961 = ORIENTED_EDGE('',*,*,#104962,.F.); +#104962 = EDGE_CURVE('',#104963,#104955,#104965,.T.); +#104963 = VERTEX_POINT('',#104964); +#104964 = CARTESIAN_POINT('',(6.575,5.575,0.)); +#104965 = CIRCLE('',#104966,1.); +#104966 = AXIS2_PLACEMENT_3D('',#104967,#104968,#104969); +#104967 = CARTESIAN_POINT('',(6.575,6.575,0.)); +#104968 = DIRECTION('',(0.,0.,-1.)); +#104969 = DIRECTION('',(0.,-1.,0.)); +#104970 = ORIENTED_EDGE('',*,*,#104971,.T.); +#104971 = EDGE_CURVE('',#104963,#104972,#104974,.T.); +#104972 = VERTEX_POINT('',#104973); +#104973 = CARTESIAN_POINT('',(6.075,5.575,0.)); +#104974 = LINE('',#104975,#104976); +#104975 = CARTESIAN_POINT('',(6.575,5.575,0.)); +#104976 = VECTOR('',#104977,1.); +#104977 = DIRECTION('',(-1.,0.,0.)); +#104978 = ORIENTED_EDGE('',*,*,#104979,.F.); +#104979 = EDGE_CURVE('',#104980,#104972,#104982,.T.); +#104980 = VERTEX_POINT('',#104981); +#104981 = CARTESIAN_POINT('',(6.075,4.3,0.)); +#104982 = LINE('',#104983,#104984); +#104983 = CARTESIAN_POINT('',(6.075,4.3,0.)); +#104984 = VECTOR('',#104985,1.); +#104985 = DIRECTION('',(0.,1.,0.)); +#104986 = ORIENTED_EDGE('',*,*,#104987,.T.); +#104987 = EDGE_CURVE('',#104980,#104988,#104990,.T.); +#104988 = VERTEX_POINT('',#104989); +#104989 = CARTESIAN_POINT('',(5.925,4.3,0.)); +#104990 = LINE('',#104991,#104992); +#104991 = CARTESIAN_POINT('',(6.075,4.3,0.)); +#104992 = VECTOR('',#104993,1.); +#104993 = DIRECTION('',(-1.,1.184237892933E-14,0.)); +#104994 = ORIENTED_EDGE('',*,*,#104995,.T.); +#104995 = EDGE_CURVE('',#104988,#104996,#104998,.T.); +#104996 = VERTEX_POINT('',#104997); +#104997 = CARTESIAN_POINT('',(5.775,4.15,0.)); +#104998 = CIRCLE('',#104999,0.15); +#104999 = AXIS2_PLACEMENT_3D('',#105000,#105001,#105002); +#105000 = CARTESIAN_POINT('',(5.925,4.15,0.)); +#105001 = DIRECTION('',(0.,-0.,1.)); +#105002 = DIRECTION('',(0.,1.,0.)); +#105003 = ORIENTED_EDGE('',*,*,#105004,.T.); +#105004 = EDGE_CURVE('',#104996,#105005,#105007,.T.); +#105005 = VERTEX_POINT('',#105006); +#105006 = CARTESIAN_POINT('',(5.775,2.95,0.)); +#105007 = LINE('',#105008,#105009); +#105008 = CARTESIAN_POINT('',(5.775,4.15,0.)); +#105009 = VECTOR('',#105010,1.); +#105010 = DIRECTION('',(0.,-1.,0.)); +#105011 = ORIENTED_EDGE('',*,*,#105012,.T.); +#105012 = EDGE_CURVE('',#105005,#105013,#105015,.T.); +#105013 = VERTEX_POINT('',#105014); +#105014 = CARTESIAN_POINT('',(5.925,2.8,0.)); +#105015 = CIRCLE('',#105016,0.15); +#105016 = AXIS2_PLACEMENT_3D('',#105017,#105018,#105019); +#105017 = CARTESIAN_POINT('',(5.925,2.95,0.)); +#105018 = DIRECTION('',(0.,0.,1.)); +#105019 = DIRECTION('',(-1.,0.,0.)); +#105020 = ORIENTED_EDGE('',*,*,#105021,.F.); +#105021 = EDGE_CURVE('',#105022,#105013,#105024,.T.); +#105022 = VERTEX_POINT('',#105023); +#105023 = CARTESIAN_POINT('',(6.075,2.8,0.)); +#105024 = LINE('',#105025,#105026); +#105025 = CARTESIAN_POINT('',(6.075,2.8,0.)); +#105026 = VECTOR('',#105027,1.); +#105027 = DIRECTION('',(-1.,1.184237892933E-14,0.)); +#105028 = ORIENTED_EDGE('',*,*,#105029,.F.); +#105029 = EDGE_CURVE('',#105030,#105022,#105032,.T.); +#105030 = VERTEX_POINT('',#105031); +#105031 = CARTESIAN_POINT('',(6.075,-2.8,0.)); +#105032 = LINE('',#105033,#105034); +#105033 = CARTESIAN_POINT('',(6.075,-2.8,0.)); +#105034 = VECTOR('',#105035,1.); +#105035 = DIRECTION('',(0.,1.,0.)); +#105036 = ORIENTED_EDGE('',*,*,#105037,.T.); +#105037 = EDGE_CURVE('',#105030,#105038,#105040,.T.); +#105038 = VERTEX_POINT('',#105039); +#105039 = CARTESIAN_POINT('',(5.925,-2.8,0.)); +#105040 = LINE('',#105041,#105042); +#105041 = CARTESIAN_POINT('',(6.075,-2.8,0.)); +#105042 = VECTOR('',#105043,1.); +#105043 = DIRECTION('',(-1.,0.,0.)); +#105044 = ORIENTED_EDGE('',*,*,#105045,.T.); +#105045 = EDGE_CURVE('',#105038,#105046,#105048,.T.); +#105046 = VERTEX_POINT('',#105047); +#105047 = CARTESIAN_POINT('',(5.775,-2.95,0.)); +#105048 = CIRCLE('',#105049,0.15); +#105049 = AXIS2_PLACEMENT_3D('',#105050,#105051,#105052); +#105050 = CARTESIAN_POINT('',(5.925,-2.95,0.)); +#105051 = DIRECTION('',(0.,-0.,1.)); +#105052 = DIRECTION('',(0.,1.,0.)); +#105053 = ORIENTED_EDGE('',*,*,#105054,.T.); +#105054 = EDGE_CURVE('',#105046,#105055,#105057,.T.); +#105055 = VERTEX_POINT('',#105056); +#105056 = CARTESIAN_POINT('',(5.775,-4.15,0.)); +#105057 = LINE('',#105058,#105059); +#105058 = CARTESIAN_POINT('',(5.775,-2.95,0.)); +#105059 = VECTOR('',#105060,1.); +#105060 = DIRECTION('',(0.,-1.,0.)); +#105061 = ORIENTED_EDGE('',*,*,#105062,.T.); +#105062 = EDGE_CURVE('',#105055,#105063,#105065,.T.); +#105063 = VERTEX_POINT('',#105064); +#105064 = CARTESIAN_POINT('',(5.925,-4.3,0.)); +#105065 = CIRCLE('',#105066,0.15); +#105066 = AXIS2_PLACEMENT_3D('',#105067,#105068,#105069); +#105067 = CARTESIAN_POINT('',(5.925,-4.15,0.)); +#105068 = DIRECTION('',(0.,0.,1.)); +#105069 = DIRECTION('',(-1.,0.,0.)); +#105070 = ORIENTED_EDGE('',*,*,#105071,.F.); +#105071 = EDGE_CURVE('',#105072,#105063,#105074,.T.); +#105072 = VERTEX_POINT('',#105073); +#105073 = CARTESIAN_POINT('',(6.075,-4.3,0.)); +#105074 = LINE('',#105075,#105076); +#105075 = CARTESIAN_POINT('',(6.075,-4.3,0.)); +#105076 = VECTOR('',#105077,1.); +#105077 = DIRECTION('',(-1.,0.,0.)); +#105078 = ORIENTED_EDGE('',*,*,#105079,.F.); +#105079 = EDGE_CURVE('',#105080,#105072,#105082,.T.); +#105080 = VERTEX_POINT('',#105081); +#105081 = CARTESIAN_POINT('',(6.075,-5.575,0.)); +#105082 = LINE('',#105083,#105084); +#105083 = CARTESIAN_POINT('',(6.075,-5.575,0.)); +#105084 = VECTOR('',#105085,1.); +#105085 = DIRECTION('',(0.,1.,0.)); +#105086 = ORIENTED_EDGE('',*,*,#105087,.F.); +#105087 = EDGE_CURVE('',#105088,#105080,#105090,.T.); +#105088 = VERTEX_POINT('',#105089); +#105089 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#105090 = LINE('',#105091,#105092); +#105091 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#105092 = VECTOR('',#105093,1.); +#105093 = DIRECTION('',(-1.,0.,0.)); +#105094 = ORIENTED_EDGE('',*,*,#105095,.F.); +#105095 = EDGE_CURVE('',#105096,#105088,#105098,.T.); +#105096 = VERTEX_POINT('',#105097); +#105097 = CARTESIAN_POINT('',(5.575,-6.575,0.)); +#105098 = CIRCLE('',#105099,1.); +#105099 = AXIS2_PLACEMENT_3D('',#105100,#105101,#105102); +#105100 = CARTESIAN_POINT('',(6.575,-6.575,0.)); +#105101 = DIRECTION('',(0.,0.,-1.)); +#105102 = DIRECTION('',(-1.,0.,0.)); +#105103 = ORIENTED_EDGE('',*,*,#105104,.T.); +#105104 = EDGE_CURVE('',#105096,#105105,#105107,.T.); +#105105 = VERTEX_POINT('',#105106); +#105106 = CARTESIAN_POINT('',(5.575,-6.075,0.)); +#105107 = LINE('',#105108,#105109); +#105108 = CARTESIAN_POINT('',(5.575,-6.575,0.)); +#105109 = VECTOR('',#105110,1.); +#105110 = DIRECTION('',(0.,1.,0.)); +#105111 = ORIENTED_EDGE('',*,*,#105112,.F.); +#105112 = EDGE_CURVE('',#105113,#105105,#105115,.T.); +#105113 = VERTEX_POINT('',#105114); +#105114 = CARTESIAN_POINT('',(4.3,-6.075,0.)); +#105115 = LINE('',#105116,#105117); +#105116 = CARTESIAN_POINT('',(4.3,-6.075,0.)); +#105117 = VECTOR('',#105118,1.); +#105118 = DIRECTION('',(1.,0.,0.)); +#105119 = ORIENTED_EDGE('',*,*,#105120,.T.); +#105120 = EDGE_CURVE('',#105113,#105121,#105123,.T.); +#105121 = VERTEX_POINT('',#105122); +#105122 = CARTESIAN_POINT('',(4.3,-5.925,0.)); +#105123 = LINE('',#105124,#105125); +#105124 = CARTESIAN_POINT('',(4.3,-6.075,0.)); +#105125 = VECTOR('',#105126,1.); +#105126 = DIRECTION('',(0.,1.,0.)); +#105127 = ORIENTED_EDGE('',*,*,#105128,.T.); +#105128 = EDGE_CURVE('',#105121,#105129,#105131,.T.); +#105129 = VERTEX_POINT('',#105130); +#105130 = CARTESIAN_POINT('',(4.15,-5.775,0.)); +#105131 = CIRCLE('',#105132,0.15); +#105132 = AXIS2_PLACEMENT_3D('',#105133,#105134,#105135); +#105133 = CARTESIAN_POINT('',(4.15,-5.925,0.)); +#105134 = DIRECTION('',(0.,0.,1.)); +#105135 = DIRECTION('',(1.,0.,-0.)); +#105136 = ORIENTED_EDGE('',*,*,#105137,.T.); +#105137 = EDGE_CURVE('',#105129,#105138,#105140,.T.); +#105138 = VERTEX_POINT('',#105139); +#105139 = CARTESIAN_POINT('',(2.95,-5.775,0.)); +#105140 = LINE('',#105141,#105142); +#105141 = CARTESIAN_POINT('',(4.15,-5.775,0.)); +#105142 = VECTOR('',#105143,1.); +#105143 = DIRECTION('',(-1.,0.,0.)); +#105144 = ORIENTED_EDGE('',*,*,#105145,.T.); +#105145 = EDGE_CURVE('',#105138,#105146,#105148,.T.); +#105146 = VERTEX_POINT('',#105147); +#105147 = CARTESIAN_POINT('',(2.8,-5.925,0.)); +#105148 = CIRCLE('',#105149,0.15); +#105149 = AXIS2_PLACEMENT_3D('',#105150,#105151,#105152); +#105150 = CARTESIAN_POINT('',(2.95,-5.925,0.)); +#105151 = DIRECTION('',(0.,-0.,1.)); +#105152 = DIRECTION('',(0.,1.,0.)); +#105153 = ORIENTED_EDGE('',*,*,#105154,.F.); +#105154 = EDGE_CURVE('',#105155,#105146,#105157,.T.); +#105155 = VERTEX_POINT('',#105156); +#105156 = CARTESIAN_POINT('',(2.8,-6.075,0.)); +#105157 = LINE('',#105158,#105159); +#105158 = CARTESIAN_POINT('',(2.8,-6.075,0.)); +#105159 = VECTOR('',#105160,1.); +#105160 = DIRECTION('',(0.,1.,0.)); +#105161 = ORIENTED_EDGE('',*,*,#105162,.F.); +#105162 = EDGE_CURVE('',#105163,#105155,#105165,.T.); +#105163 = VERTEX_POINT('',#105164); +#105164 = CARTESIAN_POINT('',(-2.8,-6.075,0.)); +#105165 = LINE('',#105166,#105167); +#105166 = CARTESIAN_POINT('',(-2.8,-6.075,0.)); +#105167 = VECTOR('',#105168,1.); +#105168 = DIRECTION('',(1.,0.,0.)); +#105169 = ORIENTED_EDGE('',*,*,#105170,.T.); +#105170 = EDGE_CURVE('',#105163,#105171,#105173,.T.); +#105171 = VERTEX_POINT('',#105172); +#105172 = CARTESIAN_POINT('',(-2.8,-5.925,0.)); +#105173 = LINE('',#105174,#105175); +#105174 = CARTESIAN_POINT('',(-2.8,-6.075,0.)); +#105175 = VECTOR('',#105176,1.); +#105176 = DIRECTION('',(0.,1.,0.)); +#105177 = ORIENTED_EDGE('',*,*,#105178,.T.); +#105178 = EDGE_CURVE('',#105171,#105179,#105181,.T.); +#105179 = VERTEX_POINT('',#105180); +#105180 = CARTESIAN_POINT('',(-2.95,-5.775,0.)); +#105181 = CIRCLE('',#105182,0.15); +#105182 = AXIS2_PLACEMENT_3D('',#105183,#105184,#105185); +#105183 = CARTESIAN_POINT('',(-2.95,-5.925,0.)); +#105184 = DIRECTION('',(0.,0.,1.)); +#105185 = DIRECTION('',(1.,0.,-0.)); +#105186 = ORIENTED_EDGE('',*,*,#105187,.T.); +#105187 = EDGE_CURVE('',#105179,#105188,#105190,.T.); +#105188 = VERTEX_POINT('',#105189); +#105189 = CARTESIAN_POINT('',(-4.15,-5.775,0.)); +#105190 = LINE('',#105191,#105192); +#105191 = CARTESIAN_POINT('',(-2.95,-5.775,0.)); +#105192 = VECTOR('',#105193,1.); +#105193 = DIRECTION('',(-1.,0.,0.)); +#105194 = ORIENTED_EDGE('',*,*,#105195,.T.); +#105195 = EDGE_CURVE('',#105188,#105196,#105198,.T.); +#105196 = VERTEX_POINT('',#105197); +#105197 = CARTESIAN_POINT('',(-4.3,-5.925,0.)); +#105198 = CIRCLE('',#105199,0.15); +#105199 = AXIS2_PLACEMENT_3D('',#105200,#105201,#105202); +#105200 = CARTESIAN_POINT('',(-4.15,-5.925,0.)); +#105201 = DIRECTION('',(0.,-0.,1.)); +#105202 = DIRECTION('',(0.,1.,0.)); +#105203 = ORIENTED_EDGE('',*,*,#105204,.F.); +#105204 = EDGE_CURVE('',#105205,#105196,#105207,.T.); +#105205 = VERTEX_POINT('',#105206); +#105206 = CARTESIAN_POINT('',(-4.3,-6.075,0.)); +#105207 = LINE('',#105208,#105209); +#105208 = CARTESIAN_POINT('',(-4.3,-6.075,0.)); +#105209 = VECTOR('',#105210,1.); +#105210 = DIRECTION('',(0.,1.,0.)); +#105211 = ORIENTED_EDGE('',*,*,#105212,.F.); +#105212 = EDGE_CURVE('',#105213,#105205,#105215,.T.); +#105213 = VERTEX_POINT('',#105214); +#105214 = CARTESIAN_POINT('',(-5.575,-6.075,0.)); +#105215 = LINE('',#105216,#105217); +#105216 = CARTESIAN_POINT('',(-5.575,-6.075,0.)); +#105217 = VECTOR('',#105218,1.); +#105218 = DIRECTION('',(1.,0.,0.)); +#105219 = ORIENTED_EDGE('',*,*,#105220,.F.); +#105220 = EDGE_CURVE('',#105221,#105213,#105223,.T.); +#105221 = VERTEX_POINT('',#105222); +#105222 = CARTESIAN_POINT('',(-5.575,-6.575,0.)); +#105223 = LINE('',#105224,#105225); +#105224 = CARTESIAN_POINT('',(-5.575,-6.575,0.)); +#105225 = VECTOR('',#105226,1.); +#105226 = DIRECTION('',(0.,1.,0.)); +#105227 = ORIENTED_EDGE('',*,*,#105228,.F.); +#105228 = EDGE_CURVE('',#105229,#105221,#105231,.T.); +#105229 = VERTEX_POINT('',#105230); +#105230 = CARTESIAN_POINT('',(-6.575,-5.575,0.)); +#105231 = CIRCLE('',#105232,1.); +#105232 = AXIS2_PLACEMENT_3D('',#105233,#105234,#105235); +#105233 = CARTESIAN_POINT('',(-6.575,-6.575,0.)); +#105234 = DIRECTION('',(0.,0.,-1.)); +#105235 = DIRECTION('',(0.,1.,0.)); +#105236 = ORIENTED_EDGE('',*,*,#105237,.T.); +#105237 = EDGE_CURVE('',#105229,#105238,#105240,.T.); +#105238 = VERTEX_POINT('',#105239); +#105239 = CARTESIAN_POINT('',(-6.075,-5.575,0.)); +#105240 = LINE('',#105241,#105242); +#105241 = CARTESIAN_POINT('',(-6.575,-5.575,0.)); +#105242 = VECTOR('',#105243,1.); +#105243 = DIRECTION('',(1.,0.,0.)); +#105244 = ORIENTED_EDGE('',*,*,#105245,.T.); +#105245 = EDGE_CURVE('',#105238,#105246,#105248,.T.); +#105246 = VERTEX_POINT('',#105247); +#105247 = CARTESIAN_POINT('',(-6.075,-4.3,0.)); +#105248 = LINE('',#105249,#105250); +#105249 = CARTESIAN_POINT('',(-6.075,-5.575,0.)); +#105250 = VECTOR('',#105251,1.); +#105251 = DIRECTION('',(0.,1.,0.)); +#105252 = ORIENTED_EDGE('',*,*,#105253,.T.); +#105253 = EDGE_CURVE('',#105246,#105254,#105256,.T.); +#105254 = VERTEX_POINT('',#105255); +#105255 = CARTESIAN_POINT('',(-5.925,-4.3,0.)); +#105256 = LINE('',#105257,#105258); +#105257 = CARTESIAN_POINT('',(-6.075,-4.3,0.)); +#105258 = VECTOR('',#105259,1.); +#105259 = DIRECTION('',(1.,0.,0.)); +#105260 = ORIENTED_EDGE('',*,*,#105261,.T.); +#105261 = EDGE_CURVE('',#105254,#105262,#105264,.T.); +#105262 = VERTEX_POINT('',#105263); +#105263 = CARTESIAN_POINT('',(-5.775,-4.15,0.)); +#105264 = CIRCLE('',#105265,0.15); +#105265 = AXIS2_PLACEMENT_3D('',#105266,#105267,#105268); +#105266 = CARTESIAN_POINT('',(-5.925,-4.15,0.)); +#105267 = DIRECTION('',(0.,0.,1.)); +#105268 = DIRECTION('',(0.,-1.,0.)); +#105269 = ORIENTED_EDGE('',*,*,#105270,.T.); +#105270 = EDGE_CURVE('',#105262,#105271,#105273,.T.); +#105271 = VERTEX_POINT('',#105272); +#105272 = CARTESIAN_POINT('',(-5.775,-2.95,0.)); +#105273 = LINE('',#105274,#105275); +#105274 = CARTESIAN_POINT('',(-5.775,-4.15,0.)); +#105275 = VECTOR('',#105276,1.); +#105276 = DIRECTION('',(0.,1.,0.)); +#105277 = ORIENTED_EDGE('',*,*,#105278,.T.); +#105278 = EDGE_CURVE('',#105271,#105279,#105281,.T.); +#105279 = VERTEX_POINT('',#105280); +#105280 = CARTESIAN_POINT('',(-5.925,-2.8,0.)); +#105281 = CIRCLE('',#105282,0.15); +#105282 = AXIS2_PLACEMENT_3D('',#105283,#105284,#105285); +#105283 = CARTESIAN_POINT('',(-5.925,-2.95,0.)); +#105284 = DIRECTION('',(0.,0.,1.)); +#105285 = DIRECTION('',(1.,0.,-0.)); +#105286 = ORIENTED_EDGE('',*,*,#105287,.F.); +#105287 = EDGE_CURVE('',#105288,#105279,#105290,.T.); +#105288 = VERTEX_POINT('',#105289); +#105289 = CARTESIAN_POINT('',(-6.075,-2.8,0.)); +#105290 = LINE('',#105291,#105292); +#105291 = CARTESIAN_POINT('',(-6.075,-2.8,0.)); +#105292 = VECTOR('',#105293,1.); +#105293 = DIRECTION('',(1.,0.,0.)); +#105294 = ORIENTED_EDGE('',*,*,#105295,.T.); +#105295 = EDGE_CURVE('',#105288,#105296,#105298,.T.); +#105296 = VERTEX_POINT('',#105297); +#105297 = CARTESIAN_POINT('',(-6.075,2.8,0.)); +#105298 = LINE('',#105299,#105300); +#105299 = CARTESIAN_POINT('',(-6.075,-2.8,0.)); +#105300 = VECTOR('',#105301,1.); +#105301 = DIRECTION('',(0.,1.,0.)); +#105302 = ORIENTED_EDGE('',*,*,#105303,.T.); +#105303 = EDGE_CURVE('',#105296,#105304,#105306,.T.); +#105304 = VERTEX_POINT('',#105305); +#105305 = CARTESIAN_POINT('',(-5.925,2.8,0.)); +#105306 = LINE('',#105307,#105308); +#105307 = CARTESIAN_POINT('',(-6.075,2.8,0.)); +#105308 = VECTOR('',#105309,1.); +#105309 = DIRECTION('',(1.,0.,0.)); +#105310 = ORIENTED_EDGE('',*,*,#105311,.T.); +#105311 = EDGE_CURVE('',#105304,#105312,#105314,.T.); +#105312 = VERTEX_POINT('',#105313); +#105313 = CARTESIAN_POINT('',(-5.775,2.95,0.)); +#105314 = CIRCLE('',#105315,0.15); +#105315 = AXIS2_PLACEMENT_3D('',#105316,#105317,#105318); +#105316 = CARTESIAN_POINT('',(-5.925,2.95,0.)); +#105317 = DIRECTION('',(0.,0.,1.)); +#105318 = DIRECTION('',(0.,-1.,0.)); +#105319 = ORIENTED_EDGE('',*,*,#105320,.T.); +#105320 = EDGE_CURVE('',#105312,#104795,#105321,.T.); +#105321 = LINE('',#105322,#105323); +#105322 = CARTESIAN_POINT('',(-5.775,2.95,0.)); +#105323 = VECTOR('',#105324,1.); +#105324 = DIRECTION('',(0.,1.,0.)); +#105325 = FACE_BOUND('',#105326,.T.); +#105326 = EDGE_LOOP('',(#105327,#105338)); +#105327 = ORIENTED_EDGE('',*,*,#105328,.F.); +#105328 = EDGE_CURVE('',#105329,#105331,#105333,.T.); +#105329 = VERTEX_POINT('',#105330); +#105330 = CARTESIAN_POINT('',(-5.4,5.1,0.)); +#105331 = VERTEX_POINT('',#105332); +#105332 = CARTESIAN_POINT('',(-4.8,5.1,0.)); +#105333 = CIRCLE('',#105334,0.3); +#105334 = AXIS2_PLACEMENT_3D('',#105335,#105336,#105337); +#105335 = CARTESIAN_POINT('',(-5.1,5.1,0.)); +#105336 = DIRECTION('',(0.,0.,-1.)); +#105337 = DIRECTION('',(-1.,0.,0.)); +#105338 = ORIENTED_EDGE('',*,*,#105339,.F.); +#105339 = EDGE_CURVE('',#105331,#105329,#105340,.T.); +#105340 = CIRCLE('',#105341,0.3); +#105341 = AXIS2_PLACEMENT_3D('',#105342,#105343,#105344); +#105342 = CARTESIAN_POINT('',(-5.1,5.1,0.)); +#105343 = DIRECTION('',(0.,0.,-1.)); +#105344 = DIRECTION('',(1.,0.,0.)); +#105345 = FACE_BOUND('',#105346,.T.); +#105346 = EDGE_LOOP('',(#105347,#105358)); +#105347 = ORIENTED_EDGE('',*,*,#105348,.F.); +#105348 = EDGE_CURVE('',#105349,#105351,#105353,.T.); +#105349 = VERTEX_POINT('',#105350); +#105350 = CARTESIAN_POINT('',(4.8,5.1,0.)); +#105351 = VERTEX_POINT('',#105352); +#105352 = CARTESIAN_POINT('',(5.4,5.1,0.)); +#105353 = CIRCLE('',#105354,0.3); +#105354 = AXIS2_PLACEMENT_3D('',#105355,#105356,#105357); +#105355 = CARTESIAN_POINT('',(5.1,5.1,0.)); +#105356 = DIRECTION('',(0.,0.,-1.)); +#105357 = DIRECTION('',(-1.,0.,0.)); +#105358 = ORIENTED_EDGE('',*,*,#105359,.F.); +#105359 = EDGE_CURVE('',#105351,#105349,#105360,.T.); +#105360 = CIRCLE('',#105361,0.3); +#105361 = AXIS2_PLACEMENT_3D('',#105362,#105363,#105364); +#105362 = CARTESIAN_POINT('',(5.1,5.1,0.)); +#105363 = DIRECTION('',(0.,0.,-1.)); +#105364 = DIRECTION('',(1.,0.,0.)); +#105365 = FACE_BOUND('',#105366,.T.); +#105366 = EDGE_LOOP('',(#105367,#105378)); +#105367 = ORIENTED_EDGE('',*,*,#105368,.F.); +#105368 = EDGE_CURVE('',#105369,#105371,#105373,.T.); +#105369 = VERTEX_POINT('',#105370); +#105370 = CARTESIAN_POINT('',(-5.4,-5.1,0.)); +#105371 = VERTEX_POINT('',#105372); +#105372 = CARTESIAN_POINT('',(-4.8,-5.1,0.)); +#105373 = CIRCLE('',#105374,0.3); +#105374 = AXIS2_PLACEMENT_3D('',#105375,#105376,#105377); +#105375 = CARTESIAN_POINT('',(-5.1,-5.1,0.)); +#105376 = DIRECTION('',(0.,0.,-1.)); +#105377 = DIRECTION('',(-1.,0.,0.)); +#105378 = ORIENTED_EDGE('',*,*,#105379,.F.); +#105379 = EDGE_CURVE('',#105371,#105369,#105380,.T.); +#105380 = CIRCLE('',#105381,0.3); +#105381 = AXIS2_PLACEMENT_3D('',#105382,#105383,#105384); +#105382 = CARTESIAN_POINT('',(-5.1,-5.1,0.)); +#105383 = DIRECTION('',(0.,0.,-1.)); +#105384 = DIRECTION('',(1.,0.,0.)); +#105385 = FACE_BOUND('',#105386,.T.); +#105386 = EDGE_LOOP('',(#105387,#105398)); +#105387 = ORIENTED_EDGE('',*,*,#105388,.F.); +#105388 = EDGE_CURVE('',#105389,#105391,#105393,.T.); +#105389 = VERTEX_POINT('',#105390); +#105390 = CARTESIAN_POINT('',(4.8,-5.1,0.)); +#105391 = VERTEX_POINT('',#105392); +#105392 = CARTESIAN_POINT('',(5.4,-5.1,0.)); +#105393 = CIRCLE('',#105394,0.3); +#105394 = AXIS2_PLACEMENT_3D('',#105395,#105396,#105397); +#105395 = CARTESIAN_POINT('',(5.1,-5.1,0.)); +#105396 = DIRECTION('',(0.,0.,-1.)); +#105397 = DIRECTION('',(-1.,0.,0.)); +#105398 = ORIENTED_EDGE('',*,*,#105399,.F.); +#105399 = EDGE_CURVE('',#105391,#105389,#105400,.T.); +#105400 = CIRCLE('',#105401,0.3); +#105401 = AXIS2_PLACEMENT_3D('',#105402,#105403,#105404); +#105402 = CARTESIAN_POINT('',(5.1,-5.1,0.)); +#105403 = DIRECTION('',(0.,0.,-1.)); +#105404 = DIRECTION('',(1.,0.,0.)); +#105405 = FACE_BOUND('',#105406,.T.); +#105406 = EDGE_LOOP('',(#105407,#105418)); +#105407 = ORIENTED_EDGE('',*,*,#105408,.F.); +#105408 = EDGE_CURVE('',#105409,#105411,#105413,.T.); +#105409 = VERTEX_POINT('',#105410); +#105410 = CARTESIAN_POINT('',(-5.,0.,0.)); +#105411 = VERTEX_POINT('',#105412); +#105412 = CARTESIAN_POINT('',(5.,0.,0.)); +#105413 = CIRCLE('',#105414,5.); +#105414 = AXIS2_PLACEMENT_3D('',#105415,#105416,#105417); +#105415 = CARTESIAN_POINT('',(0.,0.,0.)); +#105416 = DIRECTION('',(0.,0.,-1.)); +#105417 = DIRECTION('',(-1.,0.,0.)); +#105418 = ORIENTED_EDGE('',*,*,#105419,.F.); +#105419 = EDGE_CURVE('',#105411,#105409,#105420,.T.); +#105420 = CIRCLE('',#105421,5.); +#105421 = AXIS2_PLACEMENT_3D('',#105422,#105423,#105424); +#105422 = CARTESIAN_POINT('',(0.,0.,0.)); +#105423 = DIRECTION('',(0.,0.,-1.)); +#105424 = DIRECTION('',(1.,0.,0.)); +#105425 = PLANE('',#105426); +#105426 = AXIS2_PLACEMENT_3D('',#105427,#105428,#105429); +#105427 = CARTESIAN_POINT('',(0.,0.,0.)); +#105428 = DIRECTION('',(0.,0.,1.)); +#105429 = DIRECTION('',(1.,0.,-0.)); +#105430 = ADVANCED_FACE('',(#105431),#105457,.F.); +#105431 = FACE_BOUND('',#105432,.F.); +#105432 = EDGE_LOOP('',(#105433,#105434,#105442,#105451)); +#105433 = ORIENTED_EDGE('',*,*,#105419,.F.); +#105434 = ORIENTED_EDGE('',*,*,#105435,.T.); +#105435 = EDGE_CURVE('',#105411,#105436,#105438,.T.); +#105436 = VERTEX_POINT('',#105437); +#105437 = CARTESIAN_POINT('',(5.,0.,0.5)); +#105438 = LINE('',#105439,#105440); +#105439 = CARTESIAN_POINT('',(5.,0.,0.)); +#105440 = VECTOR('',#105441,1.); +#105441 = DIRECTION('',(0.,0.,1.)); +#105442 = ORIENTED_EDGE('',*,*,#105443,.T.); +#105443 = EDGE_CURVE('',#105436,#105444,#105446,.T.); +#105444 = VERTEX_POINT('',#105445); +#105445 = CARTESIAN_POINT('',(-5.,0.,0.5)); +#105446 = CIRCLE('',#105447,5.); +#105447 = AXIS2_PLACEMENT_3D('',#105448,#105449,#105450); +#105448 = CARTESIAN_POINT('',(0.,0.,0.5)); +#105449 = DIRECTION('',(0.,0.,-1.)); +#105450 = DIRECTION('',(1.,0.,0.)); +#105451 = ORIENTED_EDGE('',*,*,#105452,.F.); +#105452 = EDGE_CURVE('',#105409,#105444,#105453,.T.); +#105453 = LINE('',#105454,#105455); +#105454 = CARTESIAN_POINT('',(-5.,0.,0.)); +#105455 = VECTOR('',#105456,1.); +#105456 = DIRECTION('',(0.,0.,1.)); +#105457 = CYLINDRICAL_SURFACE('',#105458,5.); +#105458 = AXIS2_PLACEMENT_3D('',#105459,#105460,#105461); +#105459 = CARTESIAN_POINT('',(0.,0.,0.)); +#105460 = DIRECTION('',(0.,0.,1.)); +#105461 = DIRECTION('',(1.,0.,-0.)); +#105462 = ADVANCED_FACE('',(#105463),#105475,.F.); +#105463 = FACE_BOUND('',#105464,.F.); +#105464 = EDGE_LOOP('',(#105465,#105466,#105467,#105474)); +#105465 = ORIENTED_EDGE('',*,*,#105408,.F.); +#105466 = ORIENTED_EDGE('',*,*,#105452,.T.); +#105467 = ORIENTED_EDGE('',*,*,#105468,.T.); +#105468 = EDGE_CURVE('',#105444,#105436,#105469,.T.); +#105469 = CIRCLE('',#105470,5.); +#105470 = AXIS2_PLACEMENT_3D('',#105471,#105472,#105473); +#105471 = CARTESIAN_POINT('',(0.,0.,0.5)); +#105472 = DIRECTION('',(0.,0.,-1.)); +#105473 = DIRECTION('',(-1.,0.,0.)); +#105474 = ORIENTED_EDGE('',*,*,#105435,.F.); +#105475 = CYLINDRICAL_SURFACE('',#105476,5.); +#105476 = AXIS2_PLACEMENT_3D('',#105477,#105478,#105479); +#105477 = CARTESIAN_POINT('',(0.,0.,0.)); +#105478 = DIRECTION('',(0.,0.,1.)); +#105479 = DIRECTION('',(1.,0.,-0.)); +#105480 = ADVANCED_FACE('',(#105481,#105951,#105971,#105991,#106011, + #106031),#106035,.T.); +#105481 = FACE_BOUND('',#105482,.T.); +#105482 = EDGE_LOOP('',(#105483,#105493,#105501,#105510,#105518,#105527, + #105535,#105543,#105552,#105560,#105568,#105577,#105585,#105594, + #105602,#105610,#105618,#105627,#105635,#105644,#105652,#105660, + #105669,#105677,#105685,#105694,#105702,#105711,#105719,#105727, + #105735,#105744,#105752,#105761,#105769,#105777,#105786,#105794, + #105802,#105811,#105819,#105828,#105836,#105844,#105852,#105861, + #105869,#105878,#105886,#105894,#105903,#105911,#105919,#105928, + #105936,#105945)); +#105483 = ORIENTED_EDGE('',*,*,#105484,.T.); +#105484 = EDGE_CURVE('',#105485,#105487,#105489,.T.); +#105485 = VERTEX_POINT('',#105486); +#105486 = CARTESIAN_POINT('',(-6.075,2.8,0.5)); +#105487 = VERTEX_POINT('',#105488); +#105488 = CARTESIAN_POINT('',(-6.075,-2.8,0.5)); +#105489 = LINE('',#105490,#105491); +#105490 = CARTESIAN_POINT('',(-6.075,2.8,0.5)); +#105491 = VECTOR('',#105492,1.); +#105492 = DIRECTION('',(0.,-1.,0.)); +#105493 = ORIENTED_EDGE('',*,*,#105494,.T.); +#105494 = EDGE_CURVE('',#105487,#105495,#105497,.T.); +#105495 = VERTEX_POINT('',#105496); +#105496 = CARTESIAN_POINT('',(-5.925,-2.8,0.5)); +#105497 = LINE('',#105498,#105499); +#105498 = CARTESIAN_POINT('',(-6.075,-2.8,0.5)); +#105499 = VECTOR('',#105500,1.); +#105500 = DIRECTION('',(1.,0.,0.)); +#105501 = ORIENTED_EDGE('',*,*,#105502,.T.); +#105502 = EDGE_CURVE('',#105495,#105503,#105505,.T.); +#105503 = VERTEX_POINT('',#105504); +#105504 = CARTESIAN_POINT('',(-5.775,-2.95,0.5)); +#105505 = CIRCLE('',#105506,0.15); +#105506 = AXIS2_PLACEMENT_3D('',#105507,#105508,#105509); +#105507 = CARTESIAN_POINT('',(-5.925,-2.95,0.5)); +#105508 = DIRECTION('',(0.,0.,-1.)); +#105509 = DIRECTION('',(0.,1.,0.)); +#105510 = ORIENTED_EDGE('',*,*,#105511,.F.); +#105511 = EDGE_CURVE('',#105512,#105503,#105514,.T.); +#105512 = VERTEX_POINT('',#105513); +#105513 = CARTESIAN_POINT('',(-5.775,-4.15,0.5)); +#105514 = LINE('',#105515,#105516); +#105515 = CARTESIAN_POINT('',(-5.775,-4.15,0.5)); +#105516 = VECTOR('',#105517,1.); +#105517 = DIRECTION('',(0.,1.,0.)); +#105518 = ORIENTED_EDGE('',*,*,#105519,.T.); +#105519 = EDGE_CURVE('',#105512,#105520,#105522,.T.); +#105520 = VERTEX_POINT('',#105521); +#105521 = CARTESIAN_POINT('',(-5.925,-4.3,0.5)); +#105522 = CIRCLE('',#105523,0.15); +#105523 = AXIS2_PLACEMENT_3D('',#105524,#105525,#105526); +#105524 = CARTESIAN_POINT('',(-5.925,-4.15,0.5)); +#105525 = DIRECTION('',(0.,0.,-1.)); +#105526 = DIRECTION('',(1.,0.,0.)); +#105527 = ORIENTED_EDGE('',*,*,#105528,.F.); +#105528 = EDGE_CURVE('',#105529,#105520,#105531,.T.); +#105529 = VERTEX_POINT('',#105530); +#105530 = CARTESIAN_POINT('',(-6.075,-4.3,0.5)); +#105531 = LINE('',#105532,#105533); +#105532 = CARTESIAN_POINT('',(-6.075,-4.3,0.5)); +#105533 = VECTOR('',#105534,1.); +#105534 = DIRECTION('',(1.,0.,0.)); +#105535 = ORIENTED_EDGE('',*,*,#105536,.T.); +#105536 = EDGE_CURVE('',#105529,#105537,#105539,.T.); +#105537 = VERTEX_POINT('',#105538); +#105538 = CARTESIAN_POINT('',(-6.075,-5.708974596216,0.5)); +#105539 = LINE('',#105540,#105541); +#105540 = CARTESIAN_POINT('',(-6.075,-4.3,0.5)); +#105541 = VECTOR('',#105542,1.); +#105542 = DIRECTION('',(0.,-1.,0.)); +#105543 = ORIENTED_EDGE('',*,*,#105544,.T.); +#105544 = EDGE_CURVE('',#105537,#105545,#105547,.T.); +#105545 = VERTEX_POINT('',#105546); +#105546 = CARTESIAN_POINT('',(-5.708974596216,-6.075,0.5)); +#105547 = CIRCLE('',#105548,1.); +#105548 = AXIS2_PLACEMENT_3D('',#105549,#105550,#105551); +#105549 = CARTESIAN_POINT('',(-6.575,-6.575,0.5)); +#105550 = DIRECTION('',(0.,0.,-1.)); +#105551 = DIRECTION('',(0.5,0.866025403784,0.)); +#105552 = ORIENTED_EDGE('',*,*,#105553,.T.); +#105553 = EDGE_CURVE('',#105545,#105554,#105556,.T.); +#105554 = VERTEX_POINT('',#105555); +#105555 = CARTESIAN_POINT('',(-4.3,-6.075,0.5)); +#105556 = LINE('',#105557,#105558); +#105557 = CARTESIAN_POINT('',(-5.708974596216,-6.075,0.5)); +#105558 = VECTOR('',#105559,1.); +#105559 = DIRECTION('',(1.,0.,0.)); +#105560 = ORIENTED_EDGE('',*,*,#105561,.T.); +#105561 = EDGE_CURVE('',#105554,#105562,#105564,.T.); +#105562 = VERTEX_POINT('',#105563); +#105563 = CARTESIAN_POINT('',(-4.3,-5.925,0.5)); +#105564 = LINE('',#105565,#105566); +#105565 = CARTESIAN_POINT('',(-4.3,-6.075,0.5)); +#105566 = VECTOR('',#105567,1.); +#105567 = DIRECTION('',(0.,1.,0.)); +#105568 = ORIENTED_EDGE('',*,*,#105569,.T.); +#105569 = EDGE_CURVE('',#105562,#105570,#105572,.T.); +#105570 = VERTEX_POINT('',#105571); +#105571 = CARTESIAN_POINT('',(-4.15,-5.775,0.5)); +#105572 = CIRCLE('',#105573,0.15); +#105573 = AXIS2_PLACEMENT_3D('',#105574,#105575,#105576); +#105574 = CARTESIAN_POINT('',(-4.15,-5.925,0.5)); +#105575 = DIRECTION('',(0.,0.,-1.)); +#105576 = DIRECTION('',(-1.,0.,0.)); +#105577 = ORIENTED_EDGE('',*,*,#105578,.F.); +#105578 = EDGE_CURVE('',#105579,#105570,#105581,.T.); +#105579 = VERTEX_POINT('',#105580); +#105580 = CARTESIAN_POINT('',(-2.95,-5.775,0.5)); +#105581 = LINE('',#105582,#105583); +#105582 = CARTESIAN_POINT('',(-2.95,-5.775,0.5)); +#105583 = VECTOR('',#105584,1.); +#105584 = DIRECTION('',(-1.,0.,0.)); +#105585 = ORIENTED_EDGE('',*,*,#105586,.T.); +#105586 = EDGE_CURVE('',#105579,#105587,#105589,.T.); +#105587 = VERTEX_POINT('',#105588); +#105588 = CARTESIAN_POINT('',(-2.8,-5.925,0.5)); +#105589 = CIRCLE('',#105590,0.15); +#105590 = AXIS2_PLACEMENT_3D('',#105591,#105592,#105593); +#105591 = CARTESIAN_POINT('',(-2.95,-5.925,0.5)); +#105592 = DIRECTION('',(0.,0.,-1.)); +#105593 = DIRECTION('',(0.,1.,0.)); +#105594 = ORIENTED_EDGE('',*,*,#105595,.F.); +#105595 = EDGE_CURVE('',#105596,#105587,#105598,.T.); +#105596 = VERTEX_POINT('',#105597); +#105597 = CARTESIAN_POINT('',(-2.8,-6.075,0.5)); +#105598 = LINE('',#105599,#105600); +#105599 = CARTESIAN_POINT('',(-2.8,-6.075,0.5)); +#105600 = VECTOR('',#105601,1.); +#105601 = DIRECTION('',(0.,1.,0.)); +#105602 = ORIENTED_EDGE('',*,*,#105603,.T.); +#105603 = EDGE_CURVE('',#105596,#105604,#105606,.T.); +#105604 = VERTEX_POINT('',#105605); +#105605 = CARTESIAN_POINT('',(2.8,-6.075,0.5)); +#105606 = LINE('',#105607,#105608); +#105607 = CARTESIAN_POINT('',(-2.8,-6.075,0.5)); +#105608 = VECTOR('',#105609,1.); +#105609 = DIRECTION('',(1.,0.,0.)); +#105610 = ORIENTED_EDGE('',*,*,#105611,.T.); +#105611 = EDGE_CURVE('',#105604,#105612,#105614,.T.); +#105612 = VERTEX_POINT('',#105613); +#105613 = CARTESIAN_POINT('',(2.8,-5.925,0.5)); +#105614 = LINE('',#105615,#105616); +#105615 = CARTESIAN_POINT('',(2.8,-6.075,0.5)); +#105616 = VECTOR('',#105617,1.); +#105617 = DIRECTION('',(0.,1.,0.)); +#105618 = ORIENTED_EDGE('',*,*,#105619,.T.); +#105619 = EDGE_CURVE('',#105612,#105620,#105622,.T.); +#105620 = VERTEX_POINT('',#105621); +#105621 = CARTESIAN_POINT('',(2.95,-5.775,0.5)); +#105622 = CIRCLE('',#105623,0.15); +#105623 = AXIS2_PLACEMENT_3D('',#105624,#105625,#105626); +#105624 = CARTESIAN_POINT('',(2.95,-5.925,0.5)); +#105625 = DIRECTION('',(0.,0.,-1.)); +#105626 = DIRECTION('',(-1.,0.,0.)); +#105627 = ORIENTED_EDGE('',*,*,#105628,.F.); +#105628 = EDGE_CURVE('',#105629,#105620,#105631,.T.); +#105629 = VERTEX_POINT('',#105630); +#105630 = CARTESIAN_POINT('',(4.15,-5.775,0.5)); +#105631 = LINE('',#105632,#105633); +#105632 = CARTESIAN_POINT('',(4.15,-5.775,0.5)); +#105633 = VECTOR('',#105634,1.); +#105634 = DIRECTION('',(-1.,0.,0.)); +#105635 = ORIENTED_EDGE('',*,*,#105636,.T.); +#105636 = EDGE_CURVE('',#105629,#105637,#105639,.T.); +#105637 = VERTEX_POINT('',#105638); +#105638 = CARTESIAN_POINT('',(4.3,-5.925,0.5)); +#105639 = CIRCLE('',#105640,0.15); +#105640 = AXIS2_PLACEMENT_3D('',#105641,#105642,#105643); +#105641 = CARTESIAN_POINT('',(4.15,-5.925,0.5)); +#105642 = DIRECTION('',(0.,0.,-1.)); +#105643 = DIRECTION('',(0.,1.,0.)); +#105644 = ORIENTED_EDGE('',*,*,#105645,.F.); +#105645 = EDGE_CURVE('',#105646,#105637,#105648,.T.); +#105646 = VERTEX_POINT('',#105647); +#105647 = CARTESIAN_POINT('',(4.3,-6.075,0.5)); +#105648 = LINE('',#105649,#105650); +#105649 = CARTESIAN_POINT('',(4.3,-6.075,0.5)); +#105650 = VECTOR('',#105651,1.); +#105651 = DIRECTION('',(0.,1.,0.)); +#105652 = ORIENTED_EDGE('',*,*,#105653,.T.); +#105653 = EDGE_CURVE('',#105646,#105654,#105656,.T.); +#105654 = VERTEX_POINT('',#105655); +#105655 = CARTESIAN_POINT('',(5.708974596216,-6.075,0.5)); +#105656 = LINE('',#105657,#105658); +#105657 = CARTESIAN_POINT('',(4.3,-6.075,0.5)); +#105658 = VECTOR('',#105659,1.); +#105659 = DIRECTION('',(1.,0.,0.)); +#105660 = ORIENTED_EDGE('',*,*,#105661,.T.); +#105661 = EDGE_CURVE('',#105654,#105662,#105664,.T.); +#105662 = VERTEX_POINT('',#105663); +#105663 = CARTESIAN_POINT('',(6.075,-5.708974596216,0.5)); +#105664 = CIRCLE('',#105665,1.); +#105665 = AXIS2_PLACEMENT_3D('',#105666,#105667,#105668); +#105666 = CARTESIAN_POINT('',(6.575,-6.575,0.5)); +#105667 = DIRECTION('',(0.,0.,-1.)); +#105668 = DIRECTION('',(-0.866025403784,0.5,0.)); +#105669 = ORIENTED_EDGE('',*,*,#105670,.T.); +#105670 = EDGE_CURVE('',#105662,#105671,#105673,.T.); +#105671 = VERTEX_POINT('',#105672); +#105672 = CARTESIAN_POINT('',(6.075,-4.3,0.5)); +#105673 = LINE('',#105674,#105675); +#105674 = CARTESIAN_POINT('',(6.075,-5.708974596216,0.5)); +#105675 = VECTOR('',#105676,1.); +#105676 = DIRECTION('',(0.,1.,0.)); +#105677 = ORIENTED_EDGE('',*,*,#105678,.T.); +#105678 = EDGE_CURVE('',#105671,#105679,#105681,.T.); +#105679 = VERTEX_POINT('',#105680); +#105680 = CARTESIAN_POINT('',(5.925,-4.3,0.5)); +#105681 = LINE('',#105682,#105683); +#105682 = CARTESIAN_POINT('',(6.075,-4.3,0.5)); +#105683 = VECTOR('',#105684,1.); +#105684 = DIRECTION('',(-1.,0.,0.)); +#105685 = ORIENTED_EDGE('',*,*,#105686,.T.); +#105686 = EDGE_CURVE('',#105679,#105687,#105689,.T.); +#105687 = VERTEX_POINT('',#105688); +#105688 = CARTESIAN_POINT('',(5.775,-4.15,0.5)); +#105689 = CIRCLE('',#105690,0.15); +#105690 = AXIS2_PLACEMENT_3D('',#105691,#105692,#105693); +#105691 = CARTESIAN_POINT('',(5.925,-4.15,0.5)); +#105692 = DIRECTION('',(0.,0.,-1.)); +#105693 = DIRECTION('',(0.,-1.,0.)); +#105694 = ORIENTED_EDGE('',*,*,#105695,.F.); +#105695 = EDGE_CURVE('',#105696,#105687,#105698,.T.); +#105696 = VERTEX_POINT('',#105697); +#105697 = CARTESIAN_POINT('',(5.775,-2.95,0.5)); +#105698 = LINE('',#105699,#105700); +#105699 = CARTESIAN_POINT('',(5.775,-2.95,0.5)); +#105700 = VECTOR('',#105701,1.); +#105701 = DIRECTION('',(0.,-1.,0.)); +#105702 = ORIENTED_EDGE('',*,*,#105703,.T.); +#105703 = EDGE_CURVE('',#105696,#105704,#105706,.T.); +#105704 = VERTEX_POINT('',#105705); +#105705 = CARTESIAN_POINT('',(5.925,-2.8,0.5)); +#105706 = CIRCLE('',#105707,0.15); +#105707 = AXIS2_PLACEMENT_3D('',#105708,#105709,#105710); +#105708 = CARTESIAN_POINT('',(5.925,-2.95,0.5)); +#105709 = DIRECTION('',(0.,0.,-1.)); +#105710 = DIRECTION('',(-1.,0.,0.)); +#105711 = ORIENTED_EDGE('',*,*,#105712,.F.); +#105712 = EDGE_CURVE('',#105713,#105704,#105715,.T.); +#105713 = VERTEX_POINT('',#105714); +#105714 = CARTESIAN_POINT('',(6.075,-2.8,0.5)); +#105715 = LINE('',#105716,#105717); +#105716 = CARTESIAN_POINT('',(6.075,-2.8,0.5)); +#105717 = VECTOR('',#105718,1.); +#105718 = DIRECTION('',(-1.,0.,0.)); +#105719 = ORIENTED_EDGE('',*,*,#105720,.T.); +#105720 = EDGE_CURVE('',#105713,#105721,#105723,.T.); +#105721 = VERTEX_POINT('',#105722); +#105722 = CARTESIAN_POINT('',(6.075,2.8,0.5)); +#105723 = LINE('',#105724,#105725); +#105724 = CARTESIAN_POINT('',(6.075,-2.8,0.5)); +#105725 = VECTOR('',#105726,1.); +#105726 = DIRECTION('',(0.,1.,0.)); +#105727 = ORIENTED_EDGE('',*,*,#105728,.T.); +#105728 = EDGE_CURVE('',#105721,#105729,#105731,.T.); +#105729 = VERTEX_POINT('',#105730); +#105730 = CARTESIAN_POINT('',(5.925,2.8,0.5)); +#105731 = LINE('',#105732,#105733); +#105732 = CARTESIAN_POINT('',(6.075,2.8,0.5)); +#105733 = VECTOR('',#105734,1.); +#105734 = DIRECTION('',(-1.,0.,0.)); +#105735 = ORIENTED_EDGE('',*,*,#105736,.T.); +#105736 = EDGE_CURVE('',#105729,#105737,#105739,.T.); +#105737 = VERTEX_POINT('',#105738); +#105738 = CARTESIAN_POINT('',(5.775,2.95,0.5)); +#105739 = CIRCLE('',#105740,0.15); +#105740 = AXIS2_PLACEMENT_3D('',#105741,#105742,#105743); +#105741 = CARTESIAN_POINT('',(5.925,2.95,0.5)); +#105742 = DIRECTION('',(0.,0.,-1.)); +#105743 = DIRECTION('',(0.,-1.,0.)); +#105744 = ORIENTED_EDGE('',*,*,#105745,.F.); +#105745 = EDGE_CURVE('',#105746,#105737,#105748,.T.); +#105746 = VERTEX_POINT('',#105747); +#105747 = CARTESIAN_POINT('',(5.775,4.15,0.5)); +#105748 = LINE('',#105749,#105750); +#105749 = CARTESIAN_POINT('',(5.775,4.15,0.5)); +#105750 = VECTOR('',#105751,1.); +#105751 = DIRECTION('',(0.,-1.,0.)); +#105752 = ORIENTED_EDGE('',*,*,#105753,.T.); +#105753 = EDGE_CURVE('',#105746,#105754,#105756,.T.); +#105754 = VERTEX_POINT('',#105755); +#105755 = CARTESIAN_POINT('',(5.925,4.3,0.5)); +#105756 = CIRCLE('',#105757,0.15); +#105757 = AXIS2_PLACEMENT_3D('',#105758,#105759,#105760); +#105758 = CARTESIAN_POINT('',(5.925,4.15,0.5)); +#105759 = DIRECTION('',(0.,0.,-1.)); +#105760 = DIRECTION('',(-1.,0.,0.)); +#105761 = ORIENTED_EDGE('',*,*,#105762,.F.); +#105762 = EDGE_CURVE('',#105763,#105754,#105765,.T.); +#105763 = VERTEX_POINT('',#105764); +#105764 = CARTESIAN_POINT('',(6.075,4.3,0.5)); +#105765 = LINE('',#105766,#105767); +#105766 = CARTESIAN_POINT('',(6.075,4.3,0.5)); +#105767 = VECTOR('',#105768,1.); +#105768 = DIRECTION('',(-1.,0.,0.)); +#105769 = ORIENTED_EDGE('',*,*,#105770,.T.); +#105770 = EDGE_CURVE('',#105763,#105771,#105773,.T.); +#105771 = VERTEX_POINT('',#105772); +#105772 = CARTESIAN_POINT('',(6.075,5.708974596216,0.5)); +#105773 = LINE('',#105774,#105775); +#105774 = CARTESIAN_POINT('',(6.075,4.3,0.5)); +#105775 = VECTOR('',#105776,1.); +#105776 = DIRECTION('',(0.,1.,0.)); +#105777 = ORIENTED_EDGE('',*,*,#105778,.T.); +#105778 = EDGE_CURVE('',#105771,#105779,#105781,.T.); +#105779 = VERTEX_POINT('',#105780); +#105780 = CARTESIAN_POINT('',(5.708974596216,6.075,0.5)); +#105781 = CIRCLE('',#105782,1.); +#105782 = AXIS2_PLACEMENT_3D('',#105783,#105784,#105785); +#105783 = CARTESIAN_POINT('',(6.575,6.575,0.5)); +#105784 = DIRECTION('',(0.,0.,-1.)); +#105785 = DIRECTION('',(-0.5,-0.866025403784,-0.)); +#105786 = ORIENTED_EDGE('',*,*,#105787,.T.); +#105787 = EDGE_CURVE('',#105779,#105788,#105790,.T.); +#105788 = VERTEX_POINT('',#105789); +#105789 = CARTESIAN_POINT('',(4.3,6.075,0.5)); +#105790 = LINE('',#105791,#105792); +#105791 = CARTESIAN_POINT('',(5.708974596216,6.075,0.5)); +#105792 = VECTOR('',#105793,1.); +#105793 = DIRECTION('',(-1.,0.,0.)); +#105794 = ORIENTED_EDGE('',*,*,#105795,.T.); +#105795 = EDGE_CURVE('',#105788,#105796,#105798,.T.); +#105796 = VERTEX_POINT('',#105797); +#105797 = CARTESIAN_POINT('',(4.3,5.925,0.5)); +#105798 = LINE('',#105799,#105800); +#105799 = CARTESIAN_POINT('',(4.3,6.075,0.5)); +#105800 = VECTOR('',#105801,1.); +#105801 = DIRECTION('',(0.,-1.,0.)); +#105802 = ORIENTED_EDGE('',*,*,#105803,.T.); +#105803 = EDGE_CURVE('',#105796,#105804,#105806,.T.); +#105804 = VERTEX_POINT('',#105805); +#105805 = CARTESIAN_POINT('',(4.15,5.775,0.5)); +#105806 = CIRCLE('',#105807,0.15); +#105807 = AXIS2_PLACEMENT_3D('',#105808,#105809,#105810); +#105808 = CARTESIAN_POINT('',(4.15,5.925,0.5)); +#105809 = DIRECTION('',(0.,0.,-1.)); +#105810 = DIRECTION('',(1.,0.,0.)); +#105811 = ORIENTED_EDGE('',*,*,#105812,.F.); +#105812 = EDGE_CURVE('',#105813,#105804,#105815,.T.); +#105813 = VERTEX_POINT('',#105814); +#105814 = CARTESIAN_POINT('',(2.95,5.775,0.5)); +#105815 = LINE('',#105816,#105817); +#105816 = CARTESIAN_POINT('',(2.95,5.775,0.5)); +#105817 = VECTOR('',#105818,1.); +#105818 = DIRECTION('',(1.,0.,0.)); +#105819 = ORIENTED_EDGE('',*,*,#105820,.T.); +#105820 = EDGE_CURVE('',#105813,#105821,#105823,.T.); +#105821 = VERTEX_POINT('',#105822); +#105822 = CARTESIAN_POINT('',(2.8,5.925,0.5)); +#105823 = CIRCLE('',#105824,0.15); +#105824 = AXIS2_PLACEMENT_3D('',#105825,#105826,#105827); +#105825 = CARTESIAN_POINT('',(2.95,5.925,0.5)); +#105826 = DIRECTION('',(0.,0.,-1.)); +#105827 = DIRECTION('',(0.,-1.,0.)); +#105828 = ORIENTED_EDGE('',*,*,#105829,.F.); +#105829 = EDGE_CURVE('',#105830,#105821,#105832,.T.); +#105830 = VERTEX_POINT('',#105831); +#105831 = CARTESIAN_POINT('',(2.8,6.075,0.5)); +#105832 = LINE('',#105833,#105834); +#105833 = CARTESIAN_POINT('',(2.8,6.075,0.5)); +#105834 = VECTOR('',#105835,1.); +#105835 = DIRECTION('',(0.,-1.,0.)); +#105836 = ORIENTED_EDGE('',*,*,#105837,.T.); +#105837 = EDGE_CURVE('',#105830,#105838,#105840,.T.); +#105838 = VERTEX_POINT('',#105839); +#105839 = CARTESIAN_POINT('',(-2.8,6.075,0.5)); +#105840 = LINE('',#105841,#105842); +#105841 = CARTESIAN_POINT('',(2.8,6.075,0.5)); +#105842 = VECTOR('',#105843,1.); +#105843 = DIRECTION('',(-1.,0.,0.)); +#105844 = ORIENTED_EDGE('',*,*,#105845,.T.); +#105845 = EDGE_CURVE('',#105838,#105846,#105848,.T.); +#105846 = VERTEX_POINT('',#105847); +#105847 = CARTESIAN_POINT('',(-2.8,5.925,0.5)); +#105848 = LINE('',#105849,#105850); +#105849 = CARTESIAN_POINT('',(-2.8,6.075,0.5)); +#105850 = VECTOR('',#105851,1.); +#105851 = DIRECTION('',(0.,-1.,0.)); +#105852 = ORIENTED_EDGE('',*,*,#105853,.T.); +#105853 = EDGE_CURVE('',#105846,#105854,#105856,.T.); +#105854 = VERTEX_POINT('',#105855); +#105855 = CARTESIAN_POINT('',(-2.95,5.775,0.5)); +#105856 = CIRCLE('',#105857,0.15); +#105857 = AXIS2_PLACEMENT_3D('',#105858,#105859,#105860); +#105858 = CARTESIAN_POINT('',(-2.95,5.925,0.5)); +#105859 = DIRECTION('',(0.,0.,-1.)); +#105860 = DIRECTION('',(1.,0.,0.)); +#105861 = ORIENTED_EDGE('',*,*,#105862,.F.); +#105862 = EDGE_CURVE('',#105863,#105854,#105865,.T.); +#105863 = VERTEX_POINT('',#105864); +#105864 = CARTESIAN_POINT('',(-4.15,5.775,0.5)); +#105865 = LINE('',#105866,#105867); +#105866 = CARTESIAN_POINT('',(-4.15,5.775,0.5)); +#105867 = VECTOR('',#105868,1.); +#105868 = DIRECTION('',(1.,0.,0.)); +#105869 = ORIENTED_EDGE('',*,*,#105870,.T.); +#105870 = EDGE_CURVE('',#105863,#105871,#105873,.T.); +#105871 = VERTEX_POINT('',#105872); +#105872 = CARTESIAN_POINT('',(-4.3,5.925,0.5)); +#105873 = CIRCLE('',#105874,0.15); +#105874 = AXIS2_PLACEMENT_3D('',#105875,#105876,#105877); +#105875 = CARTESIAN_POINT('',(-4.15,5.925,0.5)); +#105876 = DIRECTION('',(0.,0.,-1.)); +#105877 = DIRECTION('',(0.,-1.,0.)); +#105878 = ORIENTED_EDGE('',*,*,#105879,.F.); +#105879 = EDGE_CURVE('',#105880,#105871,#105882,.T.); +#105880 = VERTEX_POINT('',#105881); +#105881 = CARTESIAN_POINT('',(-4.3,6.075,0.5)); +#105882 = LINE('',#105883,#105884); +#105883 = CARTESIAN_POINT('',(-4.3,6.075,0.5)); +#105884 = VECTOR('',#105885,1.); +#105885 = DIRECTION('',(0.,-1.,0.)); +#105886 = ORIENTED_EDGE('',*,*,#105887,.T.); +#105887 = EDGE_CURVE('',#105880,#105888,#105890,.T.); +#105888 = VERTEX_POINT('',#105889); +#105889 = CARTESIAN_POINT('',(-5.708974596216,6.075,0.5)); +#105890 = LINE('',#105891,#105892); +#105891 = CARTESIAN_POINT('',(-4.3,6.075,0.5)); +#105892 = VECTOR('',#105893,1.); +#105893 = DIRECTION('',(-1.,0.,0.)); +#105894 = ORIENTED_EDGE('',*,*,#105895,.T.); +#105895 = EDGE_CURVE('',#105888,#105896,#105898,.T.); +#105896 = VERTEX_POINT('',#105897); +#105897 = CARTESIAN_POINT('',(-6.075,5.708974596216,0.5)); +#105898 = CIRCLE('',#105899,1.); +#105899 = AXIS2_PLACEMENT_3D('',#105900,#105901,#105902); +#105900 = CARTESIAN_POINT('',(-6.575,6.575,0.5)); +#105901 = DIRECTION('',(0.,0.,-1.)); +#105902 = DIRECTION('',(0.866025403784,-0.5,0.)); +#105903 = ORIENTED_EDGE('',*,*,#105904,.T.); +#105904 = EDGE_CURVE('',#105896,#105905,#105907,.T.); +#105905 = VERTEX_POINT('',#105906); +#105906 = CARTESIAN_POINT('',(-6.075,4.3,0.5)); +#105907 = LINE('',#105908,#105909); +#105908 = CARTESIAN_POINT('',(-6.075,5.708974596216,0.5)); +#105909 = VECTOR('',#105910,1.); +#105910 = DIRECTION('',(0.,-1.,0.)); +#105911 = ORIENTED_EDGE('',*,*,#105912,.T.); +#105912 = EDGE_CURVE('',#105905,#105913,#105915,.T.); +#105913 = VERTEX_POINT('',#105914); +#105914 = CARTESIAN_POINT('',(-5.925,4.3,0.5)); +#105915 = LINE('',#105916,#105917); +#105916 = CARTESIAN_POINT('',(-6.075,4.3,0.5)); +#105917 = VECTOR('',#105918,1.); +#105918 = DIRECTION('',(1.,0.,0.)); +#105919 = ORIENTED_EDGE('',*,*,#105920,.T.); +#105920 = EDGE_CURVE('',#105913,#105921,#105923,.T.); +#105921 = VERTEX_POINT('',#105922); +#105922 = CARTESIAN_POINT('',(-5.775,4.15,0.5)); +#105923 = CIRCLE('',#105924,0.15); +#105924 = AXIS2_PLACEMENT_3D('',#105925,#105926,#105927); +#105925 = CARTESIAN_POINT('',(-5.925,4.15,0.5)); +#105926 = DIRECTION('',(0.,0.,-1.)); +#105927 = DIRECTION('',(0.,1.,0.)); +#105928 = ORIENTED_EDGE('',*,*,#105929,.F.); +#105929 = EDGE_CURVE('',#105930,#105921,#105932,.T.); +#105930 = VERTEX_POINT('',#105931); +#105931 = CARTESIAN_POINT('',(-5.775,2.95,0.5)); +#105932 = LINE('',#105933,#105934); +#105933 = CARTESIAN_POINT('',(-5.775,2.95,0.5)); +#105934 = VECTOR('',#105935,1.); +#105935 = DIRECTION('',(0.,1.,0.)); +#105936 = ORIENTED_EDGE('',*,*,#105937,.T.); +#105937 = EDGE_CURVE('',#105930,#105938,#105940,.T.); +#105938 = VERTEX_POINT('',#105939); +#105939 = CARTESIAN_POINT('',(-5.925,2.8,0.5)); +#105940 = CIRCLE('',#105941,0.15); +#105941 = AXIS2_PLACEMENT_3D('',#105942,#105943,#105944); +#105942 = CARTESIAN_POINT('',(-5.925,2.95,0.5)); +#105943 = DIRECTION('',(0.,0.,-1.)); +#105944 = DIRECTION('',(1.,0.,0.)); +#105945 = ORIENTED_EDGE('',*,*,#105946,.F.); +#105946 = EDGE_CURVE('',#105485,#105938,#105947,.T.); +#105947 = LINE('',#105948,#105949); +#105948 = CARTESIAN_POINT('',(-6.075,2.8,0.5)); +#105949 = VECTOR('',#105950,1.); +#105950 = DIRECTION('',(1.,0.,0.)); +#105951 = FACE_BOUND('',#105952,.T.); +#105952 = EDGE_LOOP('',(#105953,#105964)); +#105953 = ORIENTED_EDGE('',*,*,#105954,.T.); +#105954 = EDGE_CURVE('',#105955,#105957,#105959,.T.); +#105955 = VERTEX_POINT('',#105956); +#105956 = CARTESIAN_POINT('',(-5.4,5.1,0.5)); +#105957 = VERTEX_POINT('',#105958); +#105958 = CARTESIAN_POINT('',(-4.8,5.1,0.5)); +#105959 = CIRCLE('',#105960,0.3); +#105960 = AXIS2_PLACEMENT_3D('',#105961,#105962,#105963); +#105961 = CARTESIAN_POINT('',(-5.1,5.1,0.5)); +#105962 = DIRECTION('',(0.,0.,-1.)); +#105963 = DIRECTION('',(-1.,0.,0.)); +#105964 = ORIENTED_EDGE('',*,*,#105965,.T.); +#105965 = EDGE_CURVE('',#105957,#105955,#105966,.T.); +#105966 = CIRCLE('',#105967,0.3); +#105967 = AXIS2_PLACEMENT_3D('',#105968,#105969,#105970); +#105968 = CARTESIAN_POINT('',(-5.1,5.1,0.5)); +#105969 = DIRECTION('',(0.,0.,-1.)); +#105970 = DIRECTION('',(1.,0.,0.)); +#105971 = FACE_BOUND('',#105972,.T.); +#105972 = EDGE_LOOP('',(#105973,#105984)); +#105973 = ORIENTED_EDGE('',*,*,#105974,.T.); +#105974 = EDGE_CURVE('',#105975,#105977,#105979,.T.); +#105975 = VERTEX_POINT('',#105976); +#105976 = CARTESIAN_POINT('',(4.8,5.1,0.5)); +#105977 = VERTEX_POINT('',#105978); +#105978 = CARTESIAN_POINT('',(5.4,5.1,0.5)); +#105979 = CIRCLE('',#105980,0.3); +#105980 = AXIS2_PLACEMENT_3D('',#105981,#105982,#105983); +#105981 = CARTESIAN_POINT('',(5.1,5.1,0.5)); +#105982 = DIRECTION('',(0.,0.,-1.)); +#105983 = DIRECTION('',(-1.,0.,0.)); +#105984 = ORIENTED_EDGE('',*,*,#105985,.T.); +#105985 = EDGE_CURVE('',#105977,#105975,#105986,.T.); +#105986 = CIRCLE('',#105987,0.3); +#105987 = AXIS2_PLACEMENT_3D('',#105988,#105989,#105990); +#105988 = CARTESIAN_POINT('',(5.1,5.1,0.5)); +#105989 = DIRECTION('',(0.,0.,-1.)); +#105990 = DIRECTION('',(1.,0.,0.)); +#105991 = FACE_BOUND('',#105992,.T.); +#105992 = EDGE_LOOP('',(#105993,#106004)); +#105993 = ORIENTED_EDGE('',*,*,#105994,.T.); +#105994 = EDGE_CURVE('',#105995,#105997,#105999,.T.); +#105995 = VERTEX_POINT('',#105996); +#105996 = CARTESIAN_POINT('',(-5.4,-5.1,0.5)); +#105997 = VERTEX_POINT('',#105998); +#105998 = CARTESIAN_POINT('',(-4.8,-5.1,0.5)); +#105999 = CIRCLE('',#106000,0.3); +#106000 = AXIS2_PLACEMENT_3D('',#106001,#106002,#106003); +#106001 = CARTESIAN_POINT('',(-5.1,-5.1,0.5)); +#106002 = DIRECTION('',(0.,0.,-1.)); +#106003 = DIRECTION('',(-1.,0.,0.)); +#106004 = ORIENTED_EDGE('',*,*,#106005,.T.); +#106005 = EDGE_CURVE('',#105997,#105995,#106006,.T.); +#106006 = CIRCLE('',#106007,0.3); +#106007 = AXIS2_PLACEMENT_3D('',#106008,#106009,#106010); +#106008 = CARTESIAN_POINT('',(-5.1,-5.1,0.5)); +#106009 = DIRECTION('',(0.,0.,-1.)); +#106010 = DIRECTION('',(1.,0.,0.)); +#106011 = FACE_BOUND('',#106012,.T.); +#106012 = EDGE_LOOP('',(#106013,#106024)); +#106013 = ORIENTED_EDGE('',*,*,#106014,.T.); +#106014 = EDGE_CURVE('',#106015,#106017,#106019,.T.); +#106015 = VERTEX_POINT('',#106016); +#106016 = CARTESIAN_POINT('',(4.8,-5.1,0.5)); +#106017 = VERTEX_POINT('',#106018); +#106018 = CARTESIAN_POINT('',(5.4,-5.1,0.5)); +#106019 = CIRCLE('',#106020,0.3); +#106020 = AXIS2_PLACEMENT_3D('',#106021,#106022,#106023); +#106021 = CARTESIAN_POINT('',(5.1,-5.1,0.5)); +#106022 = DIRECTION('',(0.,0.,-1.)); +#106023 = DIRECTION('',(-1.,0.,0.)); +#106024 = ORIENTED_EDGE('',*,*,#106025,.T.); +#106025 = EDGE_CURVE('',#106017,#106015,#106026,.T.); +#106026 = CIRCLE('',#106027,0.3); +#106027 = AXIS2_PLACEMENT_3D('',#106028,#106029,#106030); +#106028 = CARTESIAN_POINT('',(5.1,-5.1,0.5)); +#106029 = DIRECTION('',(0.,0.,-1.)); +#106030 = DIRECTION('',(1.,0.,0.)); +#106031 = FACE_BOUND('',#106032,.T.); +#106032 = EDGE_LOOP('',(#106033,#106034)); +#106033 = ORIENTED_EDGE('',*,*,#105468,.T.); +#106034 = ORIENTED_EDGE('',*,*,#105443,.T.); +#106035 = PLANE('',#106036); +#106036 = AXIS2_PLACEMENT_3D('',#106037,#106038,#106039); +#106037 = CARTESIAN_POINT('',(0.,0.,0.5)); +#106038 = DIRECTION('',(0.,0.,1.)); +#106039 = DIRECTION('',(1.,0.,-0.)); +#106040 = ADVANCED_FACE('',(#106041),#106057,.F.); +#106041 = FACE_BOUND('',#106042,.F.); +#106042 = EDGE_LOOP('',(#106043,#106044,#106050,#106051)); +#106043 = ORIENTED_EDGE('',*,*,#105339,.F.); +#106044 = ORIENTED_EDGE('',*,*,#106045,.T.); +#106045 = EDGE_CURVE('',#105331,#105957,#106046,.T.); +#106046 = LINE('',#106047,#106048); +#106047 = CARTESIAN_POINT('',(-4.8,5.1,0.)); +#106048 = VECTOR('',#106049,1.); +#106049 = DIRECTION('',(0.,0.,1.)); +#106050 = ORIENTED_EDGE('',*,*,#105965,.T.); +#106051 = ORIENTED_EDGE('',*,*,#106052,.F.); +#106052 = EDGE_CURVE('',#105329,#105955,#106053,.T.); +#106053 = LINE('',#106054,#106055); +#106054 = CARTESIAN_POINT('',(-5.4,5.1,0.)); +#106055 = VECTOR('',#106056,1.); +#106056 = DIRECTION('',(0.,0.,1.)); +#106057 = CYLINDRICAL_SURFACE('',#106058,0.3); +#106058 = AXIS2_PLACEMENT_3D('',#106059,#106060,#106061); +#106059 = CARTESIAN_POINT('',(-5.1,5.1,0.)); +#106060 = DIRECTION('',(0.,0.,1.)); +#106061 = DIRECTION('',(1.,0.,-0.)); +#106062 = ADVANCED_FACE('',(#106063),#106069,.F.); +#106063 = FACE_BOUND('',#106064,.F.); +#106064 = EDGE_LOOP('',(#106065,#106066,#106067,#106068)); +#106065 = ORIENTED_EDGE('',*,*,#105328,.F.); +#106066 = ORIENTED_EDGE('',*,*,#106052,.T.); +#106067 = ORIENTED_EDGE('',*,*,#105954,.T.); +#106068 = ORIENTED_EDGE('',*,*,#106045,.F.); +#106069 = CYLINDRICAL_SURFACE('',#106070,0.3); +#106070 = AXIS2_PLACEMENT_3D('',#106071,#106072,#106073); +#106071 = CARTESIAN_POINT('',(-5.1,5.1,0.)); +#106072 = DIRECTION('',(0.,0.,1.)); +#106073 = DIRECTION('',(1.,0.,-0.)); +#106074 = ADVANCED_FACE('',(#106075),#106091,.F.); +#106075 = FACE_BOUND('',#106076,.F.); +#106076 = EDGE_LOOP('',(#106077,#106078,#106084,#106085)); +#106077 = ORIENTED_EDGE('',*,*,#105359,.F.); +#106078 = ORIENTED_EDGE('',*,*,#106079,.T.); +#106079 = EDGE_CURVE('',#105351,#105977,#106080,.T.); +#106080 = LINE('',#106081,#106082); +#106081 = CARTESIAN_POINT('',(5.4,5.1,0.)); +#106082 = VECTOR('',#106083,1.); +#106083 = DIRECTION('',(0.,0.,1.)); +#106084 = ORIENTED_EDGE('',*,*,#105985,.T.); +#106085 = ORIENTED_EDGE('',*,*,#106086,.F.); +#106086 = EDGE_CURVE('',#105349,#105975,#106087,.T.); +#106087 = LINE('',#106088,#106089); +#106088 = CARTESIAN_POINT('',(4.8,5.1,0.)); +#106089 = VECTOR('',#106090,1.); +#106090 = DIRECTION('',(0.,0.,1.)); +#106091 = CYLINDRICAL_SURFACE('',#106092,0.3); +#106092 = AXIS2_PLACEMENT_3D('',#106093,#106094,#106095); +#106093 = CARTESIAN_POINT('',(5.1,5.1,0.)); +#106094 = DIRECTION('',(0.,0.,1.)); +#106095 = DIRECTION('',(1.,0.,-0.)); +#106096 = ADVANCED_FACE('',(#106097),#106103,.F.); +#106097 = FACE_BOUND('',#106098,.F.); +#106098 = EDGE_LOOP('',(#106099,#106100,#106101,#106102)); +#106099 = ORIENTED_EDGE('',*,*,#105348,.F.); +#106100 = ORIENTED_EDGE('',*,*,#106086,.T.); +#106101 = ORIENTED_EDGE('',*,*,#105974,.T.); +#106102 = ORIENTED_EDGE('',*,*,#106079,.F.); +#106103 = CYLINDRICAL_SURFACE('',#106104,0.3); +#106104 = AXIS2_PLACEMENT_3D('',#106105,#106106,#106107); +#106105 = CARTESIAN_POINT('',(5.1,5.1,0.)); +#106106 = DIRECTION('',(0.,0.,1.)); +#106107 = DIRECTION('',(1.,0.,-0.)); +#106108 = ADVANCED_FACE('',(#106109),#106125,.F.); +#106109 = FACE_BOUND('',#106110,.F.); +#106110 = EDGE_LOOP('',(#106111,#106112,#106118,#106119)); +#106111 = ORIENTED_EDGE('',*,*,#105379,.F.); +#106112 = ORIENTED_EDGE('',*,*,#106113,.T.); +#106113 = EDGE_CURVE('',#105371,#105997,#106114,.T.); +#106114 = LINE('',#106115,#106116); +#106115 = CARTESIAN_POINT('',(-4.8,-5.1,0.)); +#106116 = VECTOR('',#106117,1.); +#106117 = DIRECTION('',(0.,0.,1.)); +#106118 = ORIENTED_EDGE('',*,*,#106005,.T.); +#106119 = ORIENTED_EDGE('',*,*,#106120,.F.); +#106120 = EDGE_CURVE('',#105369,#105995,#106121,.T.); +#106121 = LINE('',#106122,#106123); +#106122 = CARTESIAN_POINT('',(-5.4,-5.1,0.)); +#106123 = VECTOR('',#106124,1.); +#106124 = DIRECTION('',(0.,0.,1.)); +#106125 = CYLINDRICAL_SURFACE('',#106126,0.3); +#106126 = AXIS2_PLACEMENT_3D('',#106127,#106128,#106129); +#106127 = CARTESIAN_POINT('',(-5.1,-5.1,0.)); +#106128 = DIRECTION('',(0.,0.,1.)); +#106129 = DIRECTION('',(1.,0.,-0.)); +#106130 = ADVANCED_FACE('',(#106131),#106137,.F.); +#106131 = FACE_BOUND('',#106132,.F.); +#106132 = EDGE_LOOP('',(#106133,#106134,#106135,#106136)); +#106133 = ORIENTED_EDGE('',*,*,#105368,.F.); +#106134 = ORIENTED_EDGE('',*,*,#106120,.T.); +#106135 = ORIENTED_EDGE('',*,*,#105994,.T.); +#106136 = ORIENTED_EDGE('',*,*,#106113,.F.); +#106137 = CYLINDRICAL_SURFACE('',#106138,0.3); +#106138 = AXIS2_PLACEMENT_3D('',#106139,#106140,#106141); +#106139 = CARTESIAN_POINT('',(-5.1,-5.1,0.)); +#106140 = DIRECTION('',(0.,0.,1.)); +#106141 = DIRECTION('',(1.,0.,-0.)); +#106142 = ADVANCED_FACE('',(#106143),#106159,.F.); +#106143 = FACE_BOUND('',#106144,.F.); +#106144 = EDGE_LOOP('',(#106145,#106146,#106152,#106153)); +#106145 = ORIENTED_EDGE('',*,*,#105399,.F.); +#106146 = ORIENTED_EDGE('',*,*,#106147,.T.); +#106147 = EDGE_CURVE('',#105391,#106017,#106148,.T.); +#106148 = LINE('',#106149,#106150); +#106149 = CARTESIAN_POINT('',(5.4,-5.1,0.)); +#106150 = VECTOR('',#106151,1.); +#106151 = DIRECTION('',(0.,0.,1.)); +#106152 = ORIENTED_EDGE('',*,*,#106025,.T.); +#106153 = ORIENTED_EDGE('',*,*,#106154,.F.); +#106154 = EDGE_CURVE('',#105389,#106015,#106155,.T.); +#106155 = LINE('',#106156,#106157); +#106156 = CARTESIAN_POINT('',(4.8,-5.1,0.)); +#106157 = VECTOR('',#106158,1.); +#106158 = DIRECTION('',(0.,0.,1.)); +#106159 = CYLINDRICAL_SURFACE('',#106160,0.3); +#106160 = AXIS2_PLACEMENT_3D('',#106161,#106162,#106163); +#106161 = CARTESIAN_POINT('',(5.1,-5.1,0.)); +#106162 = DIRECTION('',(0.,0.,1.)); +#106163 = DIRECTION('',(1.,0.,-0.)); +#106164 = ADVANCED_FACE('',(#106165),#106171,.F.); +#106165 = FACE_BOUND('',#106166,.F.); +#106166 = EDGE_LOOP('',(#106167,#106168,#106169,#106170)); +#106167 = ORIENTED_EDGE('',*,*,#105388,.F.); +#106168 = ORIENTED_EDGE('',*,*,#106154,.T.); +#106169 = ORIENTED_EDGE('',*,*,#106014,.T.); +#106170 = ORIENTED_EDGE('',*,*,#106147,.F.); +#106171 = CYLINDRICAL_SURFACE('',#106172,0.3); +#106172 = AXIS2_PLACEMENT_3D('',#106173,#106174,#106175); +#106173 = CARTESIAN_POINT('',(5.1,-5.1,0.)); +#106174 = DIRECTION('',(0.,0.,1.)); +#106175 = DIRECTION('',(1.,0.,-0.)); +#106176 = ADVANCED_FACE('',(#106177),#106210,.F.); +#106177 = FACE_BOUND('',#106178,.T.); +#106178 = EDGE_LOOP('',(#106179,#106180,#106188,#106196,#106203,#106204) + ); +#106179 = ORIENTED_EDGE('',*,*,#105303,.F.); +#106180 = ORIENTED_EDGE('',*,*,#106181,.F.); +#106181 = EDGE_CURVE('',#106182,#105296,#106184,.T.); +#106182 = VERTEX_POINT('',#106183); +#106183 = CARTESIAN_POINT('',(-6.075,2.8,5.E-02)); +#106184 = LINE('',#106185,#106186); +#106185 = CARTESIAN_POINT('',(-6.075,2.8,5.E-02)); +#106186 = VECTOR('',#106187,1.); +#106187 = DIRECTION('',(-1.7763568394E-14,-3.552713678801E-14,-1.)); +#106188 = ORIENTED_EDGE('',*,*,#106189,.T.); +#106189 = EDGE_CURVE('',#106182,#106190,#106192,.T.); +#106190 = VERTEX_POINT('',#106191); +#106191 = CARTESIAN_POINT('',(-6.572493718553,2.8,5.E-02)); +#106192 = LINE('',#106193,#106194); +#106193 = CARTESIAN_POINT('',(-6.075,2.8,5.E-02)); +#106194 = VECTOR('',#106195,1.); +#106195 = DIRECTION('',(-1.,0.,0.)); +#106196 = ORIENTED_EDGE('',*,*,#106197,.F.); +#106197 = EDGE_CURVE('',#105485,#106190,#106198,.T.); +#106198 = CIRCLE('',#106199,0.5); +#106199 = AXIS2_PLACEMENT_3D('',#106200,#106201,#106202); +#106200 = CARTESIAN_POINT('',(-6.075,2.8,0.)); +#106201 = DIRECTION('',(0.,-1.,0.)); +#106202 = DIRECTION('',(0.,0.,1.)); +#106203 = ORIENTED_EDGE('',*,*,#105946,.T.); +#106204 = ORIENTED_EDGE('',*,*,#106205,.T.); +#106205 = EDGE_CURVE('',#105938,#105304,#106206,.T.); +#106206 = LINE('',#106207,#106208); +#106207 = CARTESIAN_POINT('',(-5.925,2.8,0.5)); +#106208 = VECTOR('',#106209,1.); +#106209 = DIRECTION('',(0.,0.,-1.)); +#106210 = PLANE('',#106211); +#106211 = AXIS2_PLACEMENT_3D('',#106212,#106213,#106214); +#106212 = CARTESIAN_POINT('',(-6.575,2.8,0.5)); +#106213 = DIRECTION('',(0.,-1.,0.)); +#106214 = DIRECTION('',(0.,0.,-1.)); +#106215 = ADVANCED_FACE('',(#106216),#106227,.F.); +#106216 = FACE_BOUND('',#106217,.F.); +#106217 = EDGE_LOOP('',(#106218,#106224,#106225,#106226)); +#106218 = ORIENTED_EDGE('',*,*,#106219,.F.); +#106219 = EDGE_CURVE('',#105930,#105312,#106220,.T.); +#106220 = LINE('',#106221,#106222); +#106221 = CARTESIAN_POINT('',(-5.775,2.95,0.5)); +#106222 = VECTOR('',#106223,1.); +#106223 = DIRECTION('',(0.,0.,-1.)); +#106224 = ORIENTED_EDGE('',*,*,#105937,.T.); +#106225 = ORIENTED_EDGE('',*,*,#106205,.T.); +#106226 = ORIENTED_EDGE('',*,*,#105311,.T.); +#106227 = CYLINDRICAL_SURFACE('',#106228,0.15); +#106228 = AXIS2_PLACEMENT_3D('',#106229,#106230,#106231); +#106229 = CARTESIAN_POINT('',(-5.925,2.95,18.48968)); +#106230 = DIRECTION('',(0.,0.,-1.)); +#106231 = DIRECTION('',(1.,0.,0.)); +#106232 = ADVANCED_FACE('',(#106233),#106244,.F.); +#106233 = FACE_BOUND('',#106234,.T.); +#106234 = EDGE_LOOP('',(#106235,#106236,#106237,#106238)); +#106235 = ORIENTED_EDGE('',*,*,#105320,.F.); +#106236 = ORIENTED_EDGE('',*,*,#106219,.F.); +#106237 = ORIENTED_EDGE('',*,*,#105929,.T.); +#106238 = ORIENTED_EDGE('',*,*,#106239,.T.); +#106239 = EDGE_CURVE('',#105921,#104795,#106240,.T.); +#106240 = LINE('',#106241,#106242); +#106241 = CARTESIAN_POINT('',(-5.775,4.15,0.5)); +#106242 = VECTOR('',#106243,1.); +#106243 = DIRECTION('',(0.,0.,-1.)); +#106244 = PLANE('',#106245); +#106245 = AXIS2_PLACEMENT_3D('',#106246,#106247,#106248); +#106246 = CARTESIAN_POINT('',(-5.775,2.8,0.5)); +#106247 = DIRECTION('',(1.,0.,0.)); +#106248 = DIRECTION('',(-0.,1.,0.)); +#106249 = ADVANCED_FACE('',(#106250),#106261,.F.); +#106250 = FACE_BOUND('',#106251,.F.); +#106251 = EDGE_LOOP('',(#106252,#106258,#106259,#106260)); +#106252 = ORIENTED_EDGE('',*,*,#106253,.F.); +#106253 = EDGE_CURVE('',#105913,#104797,#106254,.T.); +#106254 = LINE('',#106255,#106256); +#106255 = CARTESIAN_POINT('',(-5.925,4.3,0.5)); +#106256 = VECTOR('',#106257,1.); +#106257 = DIRECTION('',(0.,0.,-1.)); +#106258 = ORIENTED_EDGE('',*,*,#105920,.T.); +#106259 = ORIENTED_EDGE('',*,*,#106239,.T.); +#106260 = ORIENTED_EDGE('',*,*,#104794,.T.); +#106261 = CYLINDRICAL_SURFACE('',#106262,0.15); +#106262 = AXIS2_PLACEMENT_3D('',#106263,#106264,#106265); +#106263 = CARTESIAN_POINT('',(-5.925,4.15,18.48968)); +#106264 = DIRECTION('',(0.,0.,-1.)); +#106265 = DIRECTION('',(0.,1.,0.)); +#106266 = ADVANCED_FACE('',(#106267),#106295,.F.); +#106267 = FACE_BOUND('',#106268,.T.); +#106268 = EDGE_LOOP('',(#106269,#106270,#106279,#106287,#106293,#106294) + ); +#106269 = ORIENTED_EDGE('',*,*,#105912,.F.); +#106270 = ORIENTED_EDGE('',*,*,#106271,.T.); +#106271 = EDGE_CURVE('',#105905,#106272,#106274,.T.); +#106272 = VERTEX_POINT('',#106273); +#106273 = CARTESIAN_POINT('',(-6.572493718553,4.3,5.E-02)); +#106274 = CIRCLE('',#106275,0.5); +#106275 = AXIS2_PLACEMENT_3D('',#106276,#106277,#106278); +#106276 = CARTESIAN_POINT('',(-6.075,4.3,0.)); +#106277 = DIRECTION('',(0.,-1.,0.)); +#106278 = DIRECTION('',(0.,0.,1.)); +#106279 = ORIENTED_EDGE('',*,*,#106280,.T.); +#106280 = EDGE_CURVE('',#106272,#106281,#106283,.T.); +#106281 = VERTEX_POINT('',#106282); +#106282 = CARTESIAN_POINT('',(-6.075,4.3,5.E-02)); +#106283 = LINE('',#106284,#106285); +#106284 = CARTESIAN_POINT('',(-6.572493718553,4.3,5.E-02)); +#106285 = VECTOR('',#106286,1.); +#106286 = DIRECTION('',(1.,0.,0.)); +#106287 = ORIENTED_EDGE('',*,*,#106288,.T.); +#106288 = EDGE_CURVE('',#106281,#104806,#106289,.T.); +#106289 = LINE('',#106290,#106291); +#106290 = CARTESIAN_POINT('',(-6.075,4.3,5.E-02)); +#106291 = VECTOR('',#106292,1.); +#106292 = DIRECTION('',(-1.7763568394E-14,1.7763568394E-14,-1.)); +#106293 = ORIENTED_EDGE('',*,*,#104805,.T.); +#106294 = ORIENTED_EDGE('',*,*,#106253,.F.); +#106295 = PLANE('',#106296); +#106296 = AXIS2_PLACEMENT_3D('',#106297,#106298,#106299); +#106297 = CARTESIAN_POINT('',(-5.775,4.3,0.5)); +#106298 = DIRECTION('',(-0.,1.,0.)); +#106299 = DIRECTION('',(1.,0.,0.)); +#106300 = ADVANCED_FACE('',(#106301),#106625,.T.); +#106301 = FACE_BOUND('',#106302,.T.); +#106302 = EDGE_LOOP('',(#106303,#106313,#106322,#106330,#106338,#106346, + #106354,#106363,#106371,#106380,#106388,#106396,#106404,#106412, + #106420,#106428,#106437,#106443,#106444,#106445,#106454,#106462, + #106469,#106470,#106471,#106479,#106488,#106496,#106505,#106511, + #106512,#106520,#106529,#106537,#106545,#106553,#106561,#106569, + #106577,#106586,#106594,#106603,#106611,#106619)); +#106303 = ORIENTED_EDGE('',*,*,#106304,.T.); +#106304 = EDGE_CURVE('',#106305,#106307,#106309,.T.); +#106305 = VERTEX_POINT('',#106306); +#106306 = CARTESIAN_POINT('',(-6.075,-3.3,-4.7)); +#106307 = VERTEX_POINT('',#106308); +#106308 = CARTESIAN_POINT('',(-6.075,-1.6516,-4.7)); +#106309 = LINE('',#106310,#106311); +#106310 = CARTESIAN_POINT('',(-6.075,-3.3,-4.7)); +#106311 = VECTOR('',#106312,1.); +#106312 = DIRECTION('',(0.,1.,0.)); +#106313 = ORIENTED_EDGE('',*,*,#106314,.T.); +#106314 = EDGE_CURVE('',#106307,#106315,#106317,.T.); +#106315 = VERTEX_POINT('',#106316); +#106316 = CARTESIAN_POINT('',(-6.075,1.6516,-4.7)); +#106317 = CIRCLE('',#106318,1.6516); +#106318 = AXIS2_PLACEMENT_3D('',#106319,#106320,#106321); +#106319 = CARTESIAN_POINT('',(-6.075,0.,-4.7)); +#106320 = DIRECTION('',(-1.,0.,0.)); +#106321 = DIRECTION('',(0.,-1.,0.)); +#106322 = ORIENTED_EDGE('',*,*,#106323,.T.); +#106323 = EDGE_CURVE('',#106315,#106324,#106326,.T.); +#106324 = VERTEX_POINT('',#106325); +#106325 = CARTESIAN_POINT('',(-6.075,3.3,-4.7)); +#106326 = LINE('',#106327,#106328); +#106327 = CARTESIAN_POINT('',(-6.075,1.6516,-4.7)); +#106328 = VECTOR('',#106329,1.); +#106329 = DIRECTION('',(0.,1.,0.)); +#106330 = ORIENTED_EDGE('',*,*,#106331,.T.); +#106331 = EDGE_CURVE('',#106324,#106332,#106334,.T.); +#106332 = VERTEX_POINT('',#106333); +#106333 = CARTESIAN_POINT('',(-6.075,3.3,-9.6)); +#106334 = LINE('',#106335,#106336); +#106335 = CARTESIAN_POINT('',(-6.075,3.3,-4.7)); +#106336 = VECTOR('',#106337,1.); +#106337 = DIRECTION('',(0.,0.,-1.)); +#106338 = ORIENTED_EDGE('',*,*,#106339,.F.); +#106339 = EDGE_CURVE('',#106340,#106332,#106342,.T.); +#106340 = VERTEX_POINT('',#106341); +#106341 = CARTESIAN_POINT('',(-6.075,4.5,-9.6)); +#106342 = LINE('',#106343,#106344); +#106343 = CARTESIAN_POINT('',(-6.075,4.5,-9.6)); +#106344 = VECTOR('',#106345,1.); +#106345 = DIRECTION('',(0.,-1.,0.)); +#106346 = ORIENTED_EDGE('',*,*,#106347,.T.); +#106347 = EDGE_CURVE('',#106340,#106348,#106350,.T.); +#106348 = VERTEX_POINT('',#106349); +#106349 = CARTESIAN_POINT('',(-6.075,4.5,-13.00523257219)); +#106350 = LINE('',#106351,#106352); +#106351 = CARTESIAN_POINT('',(-6.075,4.5,-9.6)); +#106352 = VECTOR('',#106353,1.); +#106353 = DIRECTION('',(0.,0.,-1.)); +#106354 = ORIENTED_EDGE('',*,*,#106355,.T.); +#106355 = EDGE_CURVE('',#106348,#106356,#106358,.T.); +#106356 = VERTEX_POINT('',#106357); +#106357 = CARTESIAN_POINT('',(-6.075,4.794767427805,-13.3)); +#106358 = CIRCLE('',#106359,0.294767427805); +#106359 = AXIS2_PLACEMENT_3D('',#106360,#106361,#106362); +#106360 = CARTESIAN_POINT('',(-6.075,4.794767427805,-13.00523257219)); +#106361 = DIRECTION('',(1.,0.,0.)); +#106362 = DIRECTION('',(0.,-1.,1.765517468019E-14)); +#106363 = ORIENTED_EDGE('',*,*,#106364,.T.); +#106364 = EDGE_CURVE('',#106356,#106365,#106367,.T.); +#106365 = VERTEX_POINT('',#106366); +#106366 = CARTESIAN_POINT('',(-6.075,5.205232572195,-13.3)); +#106367 = LINE('',#106368,#106369); +#106368 = CARTESIAN_POINT('',(-6.075,4.794767427805,-13.3)); +#106369 = VECTOR('',#106370,1.); +#106370 = DIRECTION('',(0.,1.,0.)); +#106371 = ORIENTED_EDGE('',*,*,#106372,.T.); +#106372 = EDGE_CURVE('',#106365,#106373,#106375,.T.); +#106373 = VERTEX_POINT('',#106374); +#106374 = CARTESIAN_POINT('',(-6.075,5.5,-13.00523257219)); +#106375 = CIRCLE('',#106376,0.294767427805); +#106376 = AXIS2_PLACEMENT_3D('',#106377,#106378,#106379); +#106377 = CARTESIAN_POINT('',(-6.075,5.205232572195,-13.00523257219)); +#106378 = DIRECTION('',(1.,0.,0.)); +#106379 = DIRECTION('',(0.,0.,-1.)); +#106380 = ORIENTED_EDGE('',*,*,#106381,.T.); +#106381 = EDGE_CURVE('',#106373,#106382,#106384,.T.); +#106382 = VERTEX_POINT('',#106383); +#106383 = CARTESIAN_POINT('',(-6.075,5.5,-11.2)); +#106384 = LINE('',#106385,#106386); +#106385 = CARTESIAN_POINT('',(-6.075,5.5,-13.00523257219)); +#106386 = VECTOR('',#106387,1.); +#106387 = DIRECTION('',(0.,0.,1.)); +#106388 = ORIENTED_EDGE('',*,*,#106389,.T.); +#106389 = EDGE_CURVE('',#106382,#106390,#106392,.T.); +#106390 = VERTEX_POINT('',#106391); +#106391 = CARTESIAN_POINT('',(-6.075,5.975,-11.2)); +#106392 = LINE('',#106393,#106394); +#106393 = CARTESIAN_POINT('',(-6.075,5.5,-11.2)); +#106394 = VECTOR('',#106395,1.); +#106395 = DIRECTION('',(0.,1.,0.)); +#106396 = ORIENTED_EDGE('',*,*,#106397,.T.); +#106397 = EDGE_CURVE('',#106390,#106398,#106400,.T.); +#106398 = VERTEX_POINT('',#106399); +#106399 = CARTESIAN_POINT('',(-6.075,5.975,-5.7)); +#106400 = LINE('',#106401,#106402); +#106401 = CARTESIAN_POINT('',(-6.075,5.975,-11.2)); +#106402 = VECTOR('',#106403,1.); +#106403 = DIRECTION('',(0.,0.,1.)); +#106404 = ORIENTED_EDGE('',*,*,#106405,.T.); +#106405 = EDGE_CURVE('',#106398,#106406,#106408,.T.); +#106406 = VERTEX_POINT('',#106407); +#106407 = CARTESIAN_POINT('',(-6.075,6.575,-5.7)); +#106408 = LINE('',#106409,#106410); +#106409 = CARTESIAN_POINT('',(-6.075,5.975,-5.7)); +#106410 = VECTOR('',#106411,1.); +#106411 = DIRECTION('',(0.,1.,0.)); +#106412 = ORIENTED_EDGE('',*,*,#106413,.T.); +#106413 = EDGE_CURVE('',#106406,#106414,#106416,.T.); +#106414 = VERTEX_POINT('',#106415); +#106415 = CARTESIAN_POINT('',(-6.075,6.575,-1.2)); +#106416 = LINE('',#106417,#106418); +#106417 = CARTESIAN_POINT('',(-6.075,6.575,-5.7)); +#106418 = VECTOR('',#106419,1.); +#106419 = DIRECTION('',(0.,0.,1.)); +#106420 = ORIENTED_EDGE('',*,*,#106421,.T.); +#106421 = EDGE_CURVE('',#106414,#106422,#106424,.T.); +#106422 = VERTEX_POINT('',#106423); +#106423 = CARTESIAN_POINT('',(-6.075,5.707414107351,-0.419172696616)); +#106424 = LINE('',#106425,#106426); +#106425 = CARTESIAN_POINT('',(-6.075,6.575,-1.2)); +#106426 = VECTOR('',#106427,1.); +#106427 = DIRECTION('',(0.,-0.743294146247,0.668964731622)); +#106428 = ORIENTED_EDGE('',*,*,#106429,.T.); +#106429 = EDGE_CURVE('',#106422,#106430,#106432,.T.); +#106430 = VERTEX_POINT('',#106431); +#106431 = CARTESIAN_POINT('',(-6.075,5.575,-0.121855038117)); +#106432 = CIRCLE('',#106433,0.4); +#106433 = AXIS2_PLACEMENT_3D('',#106434,#106435,#106436); +#106434 = CARTESIAN_POINT('',(-6.075,5.975,-0.121855038117)); +#106435 = DIRECTION('',(-1.,0.,0.)); +#106436 = DIRECTION('',(-0.,-0.668964731622,-0.743294146247)); +#106437 = ORIENTED_EDGE('',*,*,#106438,.T.); +#106438 = EDGE_CURVE('',#106430,#104814,#106439,.T.); +#106439 = LINE('',#106440,#106441); +#106440 = CARTESIAN_POINT('',(-6.075,5.575,-0.121855038117)); +#106441 = VECTOR('',#106442,1.); +#106442 = DIRECTION('',(1.457762327146E-14,0.,1.)); +#106443 = ORIENTED_EDGE('',*,*,#104813,.F.); +#106444 = ORIENTED_EDGE('',*,*,#106288,.F.); +#106445 = ORIENTED_EDGE('',*,*,#106446,.T.); +#106446 = EDGE_CURVE('',#106281,#106447,#106449,.T.); +#106447 = VERTEX_POINT('',#106448); +#106448 = CARTESIAN_POINT('',(-6.075,4.15,-0.1)); +#106449 = CIRCLE('',#106450,0.15); +#106450 = AXIS2_PLACEMENT_3D('',#106451,#106452,#106453); +#106451 = CARTESIAN_POINT('',(-6.075,4.15,5.E-02)); +#106452 = DIRECTION('',(-1.,0.,0.)); +#106453 = DIRECTION('',(0.,1.,-1.246832498358E-14)); +#106454 = ORIENTED_EDGE('',*,*,#106455,.T.); +#106455 = EDGE_CURVE('',#106447,#106456,#106458,.T.); +#106456 = VERTEX_POINT('',#106457); +#106457 = CARTESIAN_POINT('',(-6.075,2.95,-0.1)); +#106458 = LINE('',#106459,#106460); +#106459 = CARTESIAN_POINT('',(-6.075,4.15,-0.1)); +#106460 = VECTOR('',#106461,1.); +#106461 = DIRECTION('',(0.,-1.,0.)); +#106462 = ORIENTED_EDGE('',*,*,#106463,.T.); +#106463 = EDGE_CURVE('',#106456,#106182,#106464,.T.); +#106464 = CIRCLE('',#106465,0.15); +#106465 = AXIS2_PLACEMENT_3D('',#106466,#106467,#106468); +#106466 = CARTESIAN_POINT('',(-6.075,2.95,5.E-02)); +#106467 = DIRECTION('',(-1.,0.,0.)); +#106468 = DIRECTION('',(-0.,-3.469446951954E-14,-1.)); +#106469 = ORIENTED_EDGE('',*,*,#106181,.T.); +#106470 = ORIENTED_EDGE('',*,*,#105295,.F.); +#106471 = ORIENTED_EDGE('',*,*,#106472,.F.); +#106472 = EDGE_CURVE('',#106473,#105288,#106475,.T.); +#106473 = VERTEX_POINT('',#106474); +#106474 = CARTESIAN_POINT('',(-6.075,-2.8,5.E-02)); +#106475 = LINE('',#106476,#106477); +#106476 = CARTESIAN_POINT('',(-6.075,-2.8,5.E-02)); +#106477 = VECTOR('',#106478,1.); +#106478 = DIRECTION('',(0.,0.,-1.)); +#106479 = ORIENTED_EDGE('',*,*,#106480,.T.); +#106480 = EDGE_CURVE('',#106473,#106481,#106483,.T.); +#106481 = VERTEX_POINT('',#106482); +#106482 = CARTESIAN_POINT('',(-6.075,-2.95,-0.1)); +#106483 = CIRCLE('',#106484,0.15); +#106484 = AXIS2_PLACEMENT_3D('',#106485,#106486,#106487); +#106485 = CARTESIAN_POINT('',(-6.075,-2.95,5.E-02)); +#106486 = DIRECTION('',(-1.,0.,0.)); +#106487 = DIRECTION('',(0.,1.,-1.246832498358E-14)); +#106488 = ORIENTED_EDGE('',*,*,#106489,.T.); +#106489 = EDGE_CURVE('',#106481,#106490,#106492,.T.); +#106490 = VERTEX_POINT('',#106491); +#106491 = CARTESIAN_POINT('',(-6.075,-4.15,-0.1)); +#106492 = LINE('',#106493,#106494); +#106493 = CARTESIAN_POINT('',(-6.075,-2.95,-0.1)); +#106494 = VECTOR('',#106495,1.); +#106495 = DIRECTION('',(0.,-1.,0.)); +#106496 = ORIENTED_EDGE('',*,*,#106497,.T.); +#106497 = EDGE_CURVE('',#106490,#106498,#106500,.T.); +#106498 = VERTEX_POINT('',#106499); +#106499 = CARTESIAN_POINT('',(-6.075,-4.3,5.E-02)); +#106500 = CIRCLE('',#106501,0.15); +#106501 = AXIS2_PLACEMENT_3D('',#106502,#106503,#106504); +#106502 = CARTESIAN_POINT('',(-6.075,-4.15,5.E-02)); +#106503 = DIRECTION('',(-1.,0.,0.)); +#106504 = DIRECTION('',(-0.,-3.469446951954E-14,-1.)); +#106505 = ORIENTED_EDGE('',*,*,#106506,.T.); +#106506 = EDGE_CURVE('',#106498,#105246,#106507,.T.); +#106507 = LINE('',#106508,#106509); +#106508 = CARTESIAN_POINT('',(-6.075,-4.3,5.E-02)); +#106509 = VECTOR('',#106510,1.); +#106510 = DIRECTION('',(-1.7763568394E-14,-5.329070518201E-14,-1.)); +#106511 = ORIENTED_EDGE('',*,*,#105245,.F.); +#106512 = ORIENTED_EDGE('',*,*,#106513,.T.); +#106513 = EDGE_CURVE('',#105238,#106514,#106516,.T.); +#106514 = VERTEX_POINT('',#106515); +#106515 = CARTESIAN_POINT('',(-6.075,-5.575,-0.121855038117)); +#106516 = LINE('',#106517,#106518); +#106517 = CARTESIAN_POINT('',(-6.075,-5.575,0.)); +#106518 = VECTOR('',#106519,1.); +#106519 = DIRECTION('',(0.,0.,-1.)); +#106520 = ORIENTED_EDGE('',*,*,#106521,.T.); +#106521 = EDGE_CURVE('',#106514,#106522,#106524,.T.); +#106522 = VERTEX_POINT('',#106523); +#106523 = CARTESIAN_POINT('',(-6.075,-5.707414107351,-0.419172696616)); +#106524 = CIRCLE('',#106525,0.4); +#106525 = AXIS2_PLACEMENT_3D('',#106526,#106527,#106528); +#106526 = CARTESIAN_POINT('',(-6.075,-5.975,-0.121855038117)); +#106527 = DIRECTION('',(-1.,0.,0.)); +#106528 = DIRECTION('',(0.,1.,0.)); +#106529 = ORIENTED_EDGE('',*,*,#106530,.T.); +#106530 = EDGE_CURVE('',#106522,#106531,#106533,.T.); +#106531 = VERTEX_POINT('',#106532); +#106532 = CARTESIAN_POINT('',(-6.075,-6.575,-1.2)); +#106533 = LINE('',#106534,#106535); +#106534 = CARTESIAN_POINT('',(-6.075,-5.707414107351,-0.419172696616)); +#106535 = VECTOR('',#106536,1.); +#106536 = DIRECTION('',(0.,-0.743294146247,-0.668964731622)); +#106537 = ORIENTED_EDGE('',*,*,#106538,.T.); +#106538 = EDGE_CURVE('',#106531,#106539,#106541,.T.); +#106539 = VERTEX_POINT('',#106540); +#106540 = CARTESIAN_POINT('',(-6.075,-6.575,-5.7)); +#106541 = LINE('',#106542,#106543); +#106542 = CARTESIAN_POINT('',(-6.075,-6.575,-1.2)); +#106543 = VECTOR('',#106544,1.); +#106544 = DIRECTION('',(0.,0.,-1.)); +#106545 = ORIENTED_EDGE('',*,*,#106546,.T.); +#106546 = EDGE_CURVE('',#106539,#106547,#106549,.T.); +#106547 = VERTEX_POINT('',#106548); +#106548 = CARTESIAN_POINT('',(-6.075,-5.975,-5.7)); +#106549 = LINE('',#106550,#106551); +#106550 = CARTESIAN_POINT('',(-6.075,-6.575,-5.7)); +#106551 = VECTOR('',#106552,1.); +#106552 = DIRECTION('',(0.,1.,0.)); +#106553 = ORIENTED_EDGE('',*,*,#106554,.T.); +#106554 = EDGE_CURVE('',#106547,#106555,#106557,.T.); +#106555 = VERTEX_POINT('',#106556); +#106556 = CARTESIAN_POINT('',(-6.075,-5.975,-11.2)); +#106557 = LINE('',#106558,#106559); +#106558 = CARTESIAN_POINT('',(-6.075,-5.975,-5.7)); +#106559 = VECTOR('',#106560,1.); +#106560 = DIRECTION('',(0.,0.,-1.)); +#106561 = ORIENTED_EDGE('',*,*,#106562,.T.); +#106562 = EDGE_CURVE('',#106555,#106563,#106565,.T.); +#106563 = VERTEX_POINT('',#106564); +#106564 = CARTESIAN_POINT('',(-6.075,-5.5,-11.2)); +#106565 = LINE('',#106566,#106567); +#106566 = CARTESIAN_POINT('',(-6.075,-5.975,-11.2)); +#106567 = VECTOR('',#106568,1.); +#106568 = DIRECTION('',(0.,1.,0.)); +#106569 = ORIENTED_EDGE('',*,*,#106570,.T.); +#106570 = EDGE_CURVE('',#106563,#106571,#106573,.T.); +#106571 = VERTEX_POINT('',#106572); +#106572 = CARTESIAN_POINT('',(-6.075,-5.5,-13.00523257219)); +#106573 = LINE('',#106574,#106575); +#106574 = CARTESIAN_POINT('',(-6.075,-5.5,-11.2)); +#106575 = VECTOR('',#106576,1.); +#106576 = DIRECTION('',(0.,0.,-1.)); +#106577 = ORIENTED_EDGE('',*,*,#106578,.T.); +#106578 = EDGE_CURVE('',#106571,#106579,#106581,.T.); +#106579 = VERTEX_POINT('',#106580); +#106580 = CARTESIAN_POINT('',(-6.075,-5.205232572195,-13.3)); +#106581 = CIRCLE('',#106582,0.294767427805); +#106582 = AXIS2_PLACEMENT_3D('',#106583,#106584,#106585); +#106583 = CARTESIAN_POINT('',(-6.075,-5.205232572195,-13.00523257219)); +#106584 = DIRECTION('',(1.,0.,0.)); +#106585 = DIRECTION('',(0.,-1.,0.)); +#106586 = ORIENTED_EDGE('',*,*,#106587,.T.); +#106587 = EDGE_CURVE('',#106579,#106588,#106590,.T.); +#106588 = VERTEX_POINT('',#106589); +#106589 = CARTESIAN_POINT('',(-6.075,-4.794767427805,-13.3)); +#106590 = LINE('',#106591,#106592); +#106591 = CARTESIAN_POINT('',(-6.075,-5.205232572195,-13.3)); +#106592 = VECTOR('',#106593,1.); +#106593 = DIRECTION('',(0.,1.,0.)); +#106594 = ORIENTED_EDGE('',*,*,#106595,.T.); +#106595 = EDGE_CURVE('',#106588,#106596,#106598,.T.); +#106596 = VERTEX_POINT('',#106597); +#106597 = CARTESIAN_POINT('',(-6.075,-4.5,-13.00523257219)); +#106598 = CIRCLE('',#106599,0.294767427805); +#106599 = AXIS2_PLACEMENT_3D('',#106600,#106601,#106602); +#106600 = CARTESIAN_POINT('',(-6.075,-4.794767427805,-13.00523257219)); +#106601 = DIRECTION('',(1.,0.,0.)); +#106602 = DIRECTION('',(0.,0.,-1.)); +#106603 = ORIENTED_EDGE('',*,*,#106604,.T.); +#106604 = EDGE_CURVE('',#106596,#106605,#106607,.T.); +#106605 = VERTEX_POINT('',#106606); +#106606 = CARTESIAN_POINT('',(-6.075,-4.5,-9.6)); +#106607 = LINE('',#106608,#106609); +#106608 = CARTESIAN_POINT('',(-6.075,-4.5,-13.00523257219)); +#106609 = VECTOR('',#106610,1.); +#106610 = DIRECTION('',(0.,0.,1.)); +#106611 = ORIENTED_EDGE('',*,*,#106612,.F.); +#106612 = EDGE_CURVE('',#106613,#106605,#106615,.T.); +#106613 = VERTEX_POINT('',#106614); +#106614 = CARTESIAN_POINT('',(-6.075,-3.3,-9.6)); +#106615 = LINE('',#106616,#106617); +#106616 = CARTESIAN_POINT('',(-6.075,-3.3,-9.6)); +#106617 = VECTOR('',#106618,1.); +#106618 = DIRECTION('',(0.,-1.,0.)); +#106619 = ORIENTED_EDGE('',*,*,#106620,.T.); +#106620 = EDGE_CURVE('',#106613,#106305,#106621,.T.); +#106621 = LINE('',#106622,#106623); +#106622 = CARTESIAN_POINT('',(-6.075,-3.3,-9.6)); +#106623 = VECTOR('',#106624,1.); +#106624 = DIRECTION('',(0.,0.,1.)); +#106625 = PLANE('',#106626); +#106626 = AXIS2_PLACEMENT_3D('',#106627,#106628,#106629); +#106627 = CARTESIAN_POINT('',(-6.075,0.,0.)); +#106628 = DIRECTION('',(1.,0.,0.)); +#106629 = DIRECTION('',(-0.,1.,0.)); +#106630 = ADVANCED_FACE('',(#106631),#106656,.F.); +#106631 = FACE_BOUND('',#106632,.T.); +#106632 = EDGE_LOOP('',(#106633,#106641,#106642,#106650)); +#106633 = ORIENTED_EDGE('',*,*,#106634,.T.); +#106634 = EDGE_CURVE('',#106635,#106305,#106637,.T.); +#106635 = VERTEX_POINT('',#106636); +#106636 = CARTESIAN_POINT('',(-6.575,-3.3,-4.7)); +#106637 = LINE('',#106638,#106639); +#106638 = CARTESIAN_POINT('',(-6.575,-3.3,-4.7)); +#106639 = VECTOR('',#106640,1.); +#106640 = DIRECTION('',(1.,0.,0.)); +#106641 = ORIENTED_EDGE('',*,*,#106620,.F.); +#106642 = ORIENTED_EDGE('',*,*,#106643,.T.); +#106643 = EDGE_CURVE('',#106613,#106644,#106646,.T.); +#106644 = VERTEX_POINT('',#106645); +#106645 = CARTESIAN_POINT('',(-6.575,-3.3,-9.6)); +#106646 = LINE('',#106647,#106648); +#106647 = CARTESIAN_POINT('',(-6.075,-3.3,-9.6)); +#106648 = VECTOR('',#106649,1.); +#106649 = DIRECTION('',(-1.,0.,0.)); +#106650 = ORIENTED_EDGE('',*,*,#106651,.T.); +#106651 = EDGE_CURVE('',#106644,#106635,#106652,.T.); +#106652 = LINE('',#106653,#106654); +#106653 = CARTESIAN_POINT('',(-6.575,-3.3,-9.6)); +#106654 = VECTOR('',#106655,1.); +#106655 = DIRECTION('',(0.,0.,1.)); +#106656 = PLANE('',#106657); +#106657 = AXIS2_PLACEMENT_3D('',#106658,#106659,#106660); +#106658 = CARTESIAN_POINT('',(-6.575,-3.3,-11.2)); +#106659 = DIRECTION('',(0.,-1.,0.)); +#106660 = DIRECTION('',(0.,0.,-1.)); +#106661 = ADVANCED_FACE('',(#106662),#106808,.T.); +#106662 = FACE_BOUND('',#106663,.T.); +#106663 = EDGE_LOOP('',(#106664,#106674,#106682,#106690,#106698,#106706, + #106714,#106722,#106730,#106738,#106746,#106754,#106762,#106770, + #106778,#106786,#106794,#106802)); +#106664 = ORIENTED_EDGE('',*,*,#106665,.F.); +#106665 = EDGE_CURVE('',#106666,#106668,#106670,.T.); +#106666 = VERTEX_POINT('',#106667); +#106667 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.296308499098)); +#106668 = VERTEX_POINT('',#106669); +#106669 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.102691500902)); +#106670 = LINE('',#106671,#106672); +#106671 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.296308499098)); +#106672 = VECTOR('',#106673,1.); +#106673 = DIRECTION('',(0.,0.,1.)); +#106674 = ORIENTED_EDGE('',*,*,#106675,.F.); +#106675 = EDGE_CURVE('',#106676,#106666,#106678,.T.); +#106676 = VERTEX_POINT('',#106677); +#106677 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-1.462265964866)); +#106678 = LINE('',#106679,#106680); +#106679 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-1.462265964866)); +#106680 = VECTOR('',#106681,1.); +#106681 = DIRECTION('',(0.,0.161064059119,0.986943954265)); +#106682 = ORIENTED_EDGE('',*,*,#106683,.F.); +#106683 = EDGE_CURVE('',#106684,#106676,#106686,.T.); +#106684 = VERTEX_POINT('',#106685); +#106685 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-1.628223411262)); +#106686 = LINE('',#106687,#106688); +#106687 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-1.628223411262)); +#106688 = VECTOR('',#106689,1.); +#106689 = DIRECTION('',(0.,0.546622136349,0.837379388362)); +#106690 = ORIENTED_EDGE('',*,*,#106691,.F.); +#106691 = EDGE_CURVE('',#106692,#106684,#106694,.T.); +#106692 = VERTEX_POINT('',#106693); +#106693 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-1.683542553604)); +#106694 = LINE('',#106695,#106696); +#106695 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-1.683542553604)); +#106696 = VECTOR('',#106697,1.); +#106697 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#106698 = ORIENTED_EDGE('',*,*,#106699,.F.); +#106699 = EDGE_CURVE('',#106700,#106692,#106702,.T.); +#106700 = VERTEX_POINT('',#106701); +#106701 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.711202124774)); +#106702 = LINE('',#106703,#106704); +#106703 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.711202124774)); +#106704 = VECTOR('',#106705,1.); +#106705 = DIRECTION('',(0.,0.979770739215,0.200123208493)); +#106706 = ORIENTED_EDGE('',*,*,#106707,.F.); +#106707 = EDGE_CURVE('',#106708,#106700,#106710,.T.); +#106708 = VERTEX_POINT('',#106709); +#106709 = CARTESIAN_POINT('',(-6.575,-3.69745,-1.683542553604)); +#106710 = LINE('',#106711,#106712); +#106711 = CARTESIAN_POINT('',(-6.575,-3.69745,-1.683542553604)); +#106712 = VECTOR('',#106713,1.); +#106713 = DIRECTION('',(0.,0.97977069431,-0.200123428343)); +#106714 = ORIENTED_EDGE('',*,*,#106715,.F.); +#106715 = EDGE_CURVE('',#106716,#106708,#106718,.T.); +#106716 = VERTEX_POINT('',#106717); +#106717 = CARTESIAN_POINT('',(-6.575,-3.7787,-1.628223411262)); +#106718 = LINE('',#106719,#106720); +#106719 = CARTESIAN_POINT('',(-6.575,-3.7787,-1.628223411262)); +#106720 = VECTOR('',#106721,1.); +#106721 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#106722 = ORIENTED_EDGE('',*,*,#106723,.F.); +#106723 = EDGE_CURVE('',#106724,#106716,#106726,.T.); +#106724 = VERTEX_POINT('',#106725); +#106725 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-1.462265964866)); +#106726 = LINE('',#106727,#106728); +#106727 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-1.462265964866)); +#106728 = VECTOR('',#106729,1.); +#106729 = DIRECTION('',(0.,0.546622684656,-0.83737903044)); +#106730 = ORIENTED_EDGE('',*,*,#106731,.F.); +#106731 = EDGE_CURVE('',#106732,#106724,#106734,.T.); +#106732 = VERTEX_POINT('',#106733); +#106733 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.296308499098)); +#106734 = LINE('',#106735,#106736); +#106735 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.296308499098)); +#106736 = VECTOR('',#106737,1.); +#106737 = DIRECTION('',(0.,0.161063161412,-0.986944100766)); +#106738 = ORIENTED_EDGE('',*,*,#106739,.F.); +#106739 = EDGE_CURVE('',#106740,#106732,#106742,.T.); +#106740 = VERTEX_POINT('',#106741); +#106741 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.102691500902)); +#106742 = LINE('',#106743,#106744); +#106743 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.102691500902)); +#106744 = VECTOR('',#106745,1.); +#106745 = DIRECTION('',(0.,0.,-1.)); +#106746 = ORIENTED_EDGE('',*,*,#106747,.F.); +#106747 = EDGE_CURVE('',#106748,#106740,#106750,.T.); +#106748 = VERTEX_POINT('',#106749); +#106749 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-0.936734073877)); +#106750 = LINE('',#106751,#106752); +#106751 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-0.936734073877)); +#106752 = VECTOR('',#106753,1.); +#106753 = DIRECTION('',(0.,-0.161063198037,-0.986944094789)); +#106754 = ORIENTED_EDGE('',*,*,#106755,.F.); +#106755 = EDGE_CURVE('',#106756,#106748,#106758,.T.); +#106756 = VERTEX_POINT('',#106757); +#106757 = CARTESIAN_POINT('',(-6.575,-3.7787,-0.770776569367)); +#106758 = LINE('',#106759,#106760); +#106759 = CARTESIAN_POINT('',(-6.575,-3.7787,-0.770776569367)); +#106760 = VECTOR('',#106761,1.); +#106761 = DIRECTION('',(0.,-0.546622550435,-0.837379118056)); +#106762 = ORIENTED_EDGE('',*,*,#106763,.F.); +#106763 = EDGE_CURVE('',#106764,#106756,#106766,.T.); +#106764 = VERTEX_POINT('',#106765); +#106765 = CARTESIAN_POINT('',(-6.575,-3.69745,-0.715457427025)); +#106766 = LINE('',#106767,#106768); +#106767 = CARTESIAN_POINT('',(-6.575,-3.69745,-0.715457427025)); +#106768 = VECTOR('',#106769,1.); +#106769 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#106770 = ORIENTED_EDGE('',*,*,#106771,.F.); +#106771 = EDGE_CURVE('',#106772,#106764,#106774,.T.); +#106772 = VERTEX_POINT('',#106773); +#106773 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.687797855854)); +#106774 = LINE('',#106775,#106776); +#106775 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.687797855854)); +#106776 = VECTOR('',#106777,1.); +#106777 = DIRECTION('',(0.,-0.97977069431,-0.200123428343)); +#106778 = ORIENTED_EDGE('',*,*,#106779,.F.); +#106779 = EDGE_CURVE('',#106780,#106772,#106782,.T.); +#106780 = VERTEX_POINT('',#106781); +#106781 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-0.715457427025)); +#106782 = LINE('',#106783,#106784); +#106783 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-0.715457427025)); +#106784 = VECTOR('',#106785,1.); +#106785 = DIRECTION('',(0.,-0.979770739215,0.200123208493)); +#106786 = ORIENTED_EDGE('',*,*,#106787,.F.); +#106787 = EDGE_CURVE('',#106788,#106780,#106790,.T.); +#106788 = VERTEX_POINT('',#106789); +#106789 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-0.770776569367)); +#106790 = LINE('',#106791,#106792); +#106791 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-0.770776569367)); +#106792 = VECTOR('',#106793,1.); +#106793 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#106794 = ORIENTED_EDGE('',*,*,#106795,.F.); +#106795 = EDGE_CURVE('',#106796,#106788,#106798,.T.); +#106796 = VERTEX_POINT('',#106797); +#106797 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-0.936734073877)); +#106798 = LINE('',#106799,#106800); +#106799 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-0.936734073877)); +#106800 = VECTOR('',#106801,1.); +#106801 = DIRECTION('',(0.,-0.546622002129,0.837379475978)); +#106802 = ORIENTED_EDGE('',*,*,#106803,.F.); +#106803 = EDGE_CURVE('',#106668,#106796,#106804,.T.); +#106804 = LINE('',#106805,#106806); +#106805 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.102691500902)); +#106806 = VECTOR('',#106807,1.); +#106807 = DIRECTION('',(0.,-0.161064095744,0.986943948288)); +#106808 = PLANE('',#106809); +#106809 = AXIS2_PLACEMENT_3D('',#106810,#106811,#106812); +#106810 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#106811 = DIRECTION('',(-1.,0.,0.)); +#106812 = DIRECTION('',(0.,0.,1.)); +#106813 = ADVANCED_FACE('',(#106814),#106904,.T.); +#106814 = FACE_BOUND('',#106815,.T.); +#106815 = EDGE_LOOP('',(#106816,#106826,#106834,#106842,#106850,#106858, + #106866,#106874,#106882,#106890,#106898)); +#106816 = ORIENTED_EDGE('',*,*,#106817,.F.); +#106817 = EDGE_CURVE('',#106818,#106820,#106822,.T.); +#106818 = VERTEX_POINT('',#106819); +#106819 = CARTESIAN_POINT('',(-6.575,3.157366489981,-1.84896687187)); +#106820 = VERTEX_POINT('',#106821); +#106821 = CARTESIAN_POINT('',(-6.575,3.188707399273,-1.858467462308)); +#106822 = LINE('',#106823,#106824); +#106823 = CARTESIAN_POINT('',(-6.575,3.157366489981,-1.84896687187)); +#106824 = VECTOR('',#106825,1.); +#106825 = DIRECTION('',(0.,0.9569960499,-0.290100948767)); +#106826 = ORIENTED_EDGE('',*,*,#106827,.F.); +#106827 = EDGE_CURVE('',#106828,#106818,#106830,.T.); +#106828 = VERTEX_POINT('',#106829); +#106829 = CARTESIAN_POINT('',(-6.575,3.270476432305,-1.571396022342)); +#106830 = LINE('',#106831,#106832); +#106831 = CARTESIAN_POINT('',(-6.575,3.270476432305,-1.571396022342)); +#106832 = VECTOR('',#106833,1.); +#106833 = DIRECTION('',(0.,-0.377369914624,-0.926062604545)); +#106834 = ORIENTED_EDGE('',*,*,#106835,.F.); +#106835 = EDGE_CURVE('',#106836,#106828,#106838,.T.); +#106836 = VERTEX_POINT('',#106837); +#106837 = CARTESIAN_POINT('',(-6.575,3.372401195608,-1.643874351912)); +#106838 = LINE('',#106839,#106840); +#106839 = CARTESIAN_POINT('',(-6.575,3.372401195608,-1.643874351912)); +#106840 = VECTOR('',#106841,1.); +#106841 = DIRECTION('',(0.,-0.814960996898,0.579515809565)); +#106842 = ORIENTED_EDGE('',*,*,#106843,.F.); +#106843 = EDGE_CURVE('',#106844,#106836,#106846,.T.); +#106844 = VERTEX_POINT('',#106845); +#106845 = CARTESIAN_POINT('',(-6.575,3.409010117504,-1.682692635704)); +#106846 = LINE('',#106847,#106848); +#106847 = CARTESIAN_POINT('',(-6.575,3.409010117504,-1.682692635704)); +#106848 = VECTOR('',#106849,1.); +#106849 = DIRECTION('',(0.,-0.686100427617,0.727506840672)); +#106850 = ORIENTED_EDGE('',*,*,#106851,.F.); +#106851 = EDGE_CURVE('',#106852,#106844,#106854,.T.); +#106852 = VERTEX_POINT('',#106853); +#106853 = CARTESIAN_POINT('',(-6.575,3.41691212871,-1.726669177117)); +#106854 = LINE('',#106855,#106856); +#106855 = CARTESIAN_POINT('',(-6.575,3.41691212871,-1.726669177117)); +#106856 = VECTOR('',#106857,1.); +#106857 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#106858 = ORIENTED_EDGE('',*,*,#106859,.F.); +#106859 = EDGE_CURVE('',#106860,#106852,#106862,.T.); +#106860 = VERTEX_POINT('',#106861); +#106861 = CARTESIAN_POINT('',(-6.575,3.407826683402,-1.758565999743)); +#106862 = LINE('',#106863,#106864); +#106863 = CARTESIAN_POINT('',(-6.575,3.407826683402,-1.758565999743)); +#106864 = VECTOR('',#106865,1.); +#106865 = DIRECTION('',(0.,0.273942384099,0.96174610485)); +#106866 = ORIENTED_EDGE('',*,*,#106867,.F.); +#106867 = EDGE_CURVE('',#106868,#106860,#106870,.T.); +#106868 = VERTEX_POINT('',#106869); +#106869 = CARTESIAN_POINT('',(-6.575,3.384387782028,-1.793041961908)); +#106870 = LINE('',#106871,#106872); +#106871 = CARTESIAN_POINT('',(-6.575,3.384387782028,-1.793041961908)); +#106872 = VECTOR('',#106873,1.); +#106873 = DIRECTION('',(0.,0.562232059119,0.826979511052)); +#106874 = ORIENTED_EDGE('',*,*,#106875,.F.); +#106875 = EDGE_CURVE('',#106876,#106868,#106878,.T.); +#106876 = VERTEX_POINT('',#106877); +#106877 = CARTESIAN_POINT('',(-6.575,3.346595420898,-1.830097043079)); +#106878 = LINE('',#106879,#106880); +#106879 = CARTESIAN_POINT('',(-6.575,3.346595420898,-1.830097043079)); +#106880 = VECTOR('',#106881,1.); +#106881 = DIRECTION('',(0.,0.714037450385,0.700107505636)); +#106882 = ORIENTED_EDGE('',*,*,#106883,.F.); +#106883 = EDGE_CURVE('',#106884,#106876,#106886,.T.); +#106884 = VERTEX_POINT('',#106885); +#106885 = CARTESIAN_POINT('',(-6.575,3.306169046689,-1.852493284089)); +#106886 = LINE('',#106887,#106888); +#106887 = CARTESIAN_POINT('',(-6.575,3.306169046689,-1.852493284089)); +#106888 = VECTOR('',#106889,1.); +#106889 = DIRECTION('',(0.,0.874734040064,0.484603300806)); +#106890 = ORIENTED_EDGE('',*,*,#106891,.F.); +#106891 = EDGE_CURVE('',#106892,#106884,#106894,.T.); +#106892 = VERTEX_POINT('',#106893); +#106893 = CARTESIAN_POINT('',(-6.575,3.248755235576,-1.86280979749)); +#106894 = LINE('',#106895,#106896); +#106895 = CARTESIAN_POINT('',(-6.575,3.248755235576,-1.86280979749)); +#106896 = VECTOR('',#106897,1.); +#106897 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#106898 = ORIENTED_EDGE('',*,*,#106899,.F.); +#106899 = EDGE_CURVE('',#106820,#106892,#106900,.T.); +#106900 = LINE('',#106901,#106902); +#106901 = CARTESIAN_POINT('',(-6.575,3.188707399273,-1.858467462308)); +#106902 = VECTOR('',#106903,1.); +#106903 = DIRECTION('',(0.,0.997395509915,-7.212625598476E-02)); +#106904 = PLANE('',#106905); +#106905 = AXIS2_PLACEMENT_3D('',#106906,#106907,#106908); +#106906 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#106907 = DIRECTION('',(-1.,0.,0.)); +#106908 = DIRECTION('',(0.,0.,1.)); +#106909 = ADVANCED_FACE('',(#106910),#107008,.T.); +#106910 = FACE_BOUND('',#106911,.T.); +#106911 = EDGE_LOOP('',(#106912,#106922,#106930,#106938,#106946,#106954, + #106962,#106970,#106978,#106986,#106994,#107002)); +#106912 = ORIENTED_EDGE('',*,*,#106913,.F.); +#106913 = EDGE_CURVE('',#106914,#106916,#106918,.T.); +#106914 = VERTEX_POINT('',#106915); +#106915 = CARTESIAN_POINT('',(-6.575,3.16973511706,-1.42304434742)); +#106916 = VERTEX_POINT('',#106917); +#106917 = CARTESIAN_POINT('',(-6.575,3.237684943114,-1.471363222571)); +#106918 = LINE('',#106919,#106920); +#106919 = CARTESIAN_POINT('',(-6.575,3.16973511706,-1.42304434742)); +#106920 = VECTOR('',#106921,1.); +#106921 = DIRECTION('',(0.,0.814960995459,-0.579515811588)); +#106922 = ORIENTED_EDGE('',*,*,#106923,.F.); +#106923 = EDGE_CURVE('',#106924,#106914,#106926,.T.); +#106924 = VERTEX_POINT('',#106925); +#106925 = CARTESIAN_POINT('',(-6.575,3.133126172386,-1.38422602533)); +#106926 = LINE('',#106927,#106928); +#106927 = CARTESIAN_POINT('',(-6.575,3.133126172386,-1.38422602533)); +#106928 = VECTOR('',#106929,1.); +#106929 = DIRECTION('',(0.,0.686100295294,-0.727506965463)); +#106930 = ORIENTED_EDGE('',*,*,#106931,.F.); +#106931 = EDGE_CURVE('',#106932,#106924,#106934,.T.); +#106932 = VERTEX_POINT('',#106933); +#106933 = CARTESIAN_POINT('',(-6.575,3.127858164915,-1.354908331054)); +#106934 = LINE('',#106935,#106936); +#106935 = CARTESIAN_POINT('',(-6.575,3.127858164915,-1.354908331054)); +#106936 = VECTOR('',#106937,1.); +#106937 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#106938 = ORIENTED_EDGE('',*,*,#106939,.F.); +#106939 = EDGE_CURVE('',#106940,#106932,#106942,.T.); +#106940 = VERTEX_POINT('',#106941); +#106941 = CARTESIAN_POINT('',(-6.575,3.148663079798,-1.305773529251)); +#106942 = LINE('',#106943,#106944); +#106943 = CARTESIAN_POINT('',(-6.575,3.148663079798,-1.305773529251)); +#106944 = VECTOR('',#106945,1.); +#106945 = DIRECTION('',(0.,-0.389912020644,-0.920852114162)); +#106946 = ORIENTED_EDGE('',*,*,#106947,.F.); +#106947 = EDGE_CURVE('',#106948,#106940,#106950,.T.); +#106948 = VERTEX_POINT('',#106949); +#106949 = CARTESIAN_POINT('',(-6.575,3.174735981619,-1.285956425413)); +#106950 = LINE('',#106951,#106952); +#106951 = CARTESIAN_POINT('',(-6.575,3.174735981619,-1.285956425413)); +#106952 = VECTOR('',#106953,1.); +#106953 = DIRECTION('',(0.,-0.796137209037,-0.605116141238)); +#106954 = ORIENTED_EDGE('',*,*,#106955,.F.); +#106955 = EDGE_CURVE('',#106956,#106948,#106958,.T.); +#106956 = VERTEX_POINT('',#106957); +#106957 = CARTESIAN_POINT('',(-6.575,3.203442887175,-1.280798168713)); +#106958 = LINE('',#106959,#106960); +#106959 = CARTESIAN_POINT('',(-6.575,3.203442887175,-1.280798168713)); +#106960 = VECTOR('',#106961,1.); +#106961 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#106962 = ORIENTED_EDGE('',*,*,#106963,.F.); +#106963 = EDGE_CURVE('',#106964,#106956,#106966,.T.); +#106964 = VERTEX_POINT('',#106965); +#106965 = CARTESIAN_POINT('',(-6.575,3.234783806733,-1.290298757306)); +#106966 = LINE('',#106967,#106968); +#106967 = CARTESIAN_POINT('',(-6.575,3.234783806733,-1.290298757306)); +#106968 = VECTOR('',#106969,1.); +#106969 = DIRECTION('',(0.,-0.956996091921,0.290100810147)); +#106970 = ORIENTED_EDGE('',*,*,#106971,.F.); +#106971 = EDGE_CURVE('',#106972,#106964,#106974,.T.); +#106972 = VERTEX_POINT('',#106973); +#106973 = CARTESIAN_POINT('',(-6.575,3.251771273513,-1.302378474249)); +#106974 = LINE('',#106975,#106976); +#106975 = CARTESIAN_POINT('',(-6.575,3.251771273513,-1.302378474249)); +#106976 = VECTOR('',#106977,1.); +#106977 = DIRECTION('',(0.,-0.814961202664,0.5795155202)); +#106978 = ORIENTED_EDGE('',*,*,#106979,.F.); +#106979 = EDGE_CURVE('',#106980,#106972,#106982,.T.); +#106980 = VERTEX_POINT('',#106981); +#106981 = CARTESIAN_POINT('',(-6.575,3.271392733762,-1.329117040175)); +#106982 = LINE('',#106983,#106984); +#106983 = CARTESIAN_POINT('',(-6.575,3.271392733762,-1.329117040175)); +#106984 = VECTOR('',#106985,1.); +#106985 = DIRECTION('',(0.,-0.591622030416,0.806215463215)); +#106986 = ORIENTED_EDGE('',*,*,#106987,.F.); +#106987 = EDGE_CURVE('',#106988,#106980,#106990,.T.); +#106988 = VERTEX_POINT('',#106989); +#106989 = CARTESIAN_POINT('',(-6.575,3.276660741233,-1.358434734451)); +#106990 = LINE('',#106991,#106992); +#106991 = CARTESIAN_POINT('',(-6.575,3.276660741233,-1.358434734451)); +#106992 = VECTOR('',#106993,1.); +#106993 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#106994 = ORIENTED_EDGE('',*,*,#106995,.F.); +#106995 = EDGE_CURVE('',#106996,#106988,#106998,.T.); +#106996 = VERTEX_POINT('',#106997); +#106997 = CARTESIAN_POINT('',(-6.575,3.25848984773,-1.422228422613)); +#106998 = LINE('',#106999,#107000); +#106999 = CARTESIAN_POINT('',(-6.575,3.25848984773,-1.422228422613)); +#107000 = VECTOR('',#107001,1.); +#107001 = DIRECTION('',(0.,0.273942253926,0.961746141928)); +#107002 = ORIENTED_EDGE('',*,*,#107003,.F.); +#107003 = EDGE_CURVE('',#106916,#106996,#107004,.T.); +#107004 = LINE('',#107005,#107006); +#107005 = CARTESIAN_POINT('',(-6.575,3.237684943114,-1.471363222571)); +#107006 = VECTOR('',#107007,1.); +#107007 = DIRECTION('',(0.,0.389911869903,0.92085217799)); +#107008 = PLANE('',#107009); +#107009 = AXIS2_PLACEMENT_3D('',#107010,#107011,#107012); +#107010 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#107011 = DIRECTION('',(-1.,0.,0.)); +#107012 = DIRECTION('',(0.,0.,1.)); +#107013 = ADVANCED_FACE('',(#107014,#107334,#107496,#107594,#107820, + #107878,#108088,#108546),#108852,.T.); +#107014 = FACE_BOUND('',#107015,.T.); +#107015 = EDGE_LOOP('',(#107016,#107024,#107032,#107041,#107049,#107058, + #107066,#107074,#107082,#107090,#107098,#107106,#107115,#107121, + #107129,#107138,#107146,#107155,#107163,#107172,#107180,#107189, + #107195,#107203,#107212,#107220,#107228,#107236,#107244,#107252, + #107260,#107269,#107277,#107286,#107294,#107302,#107310,#107318, + #107327,#107333)); +#107016 = ORIENTED_EDGE('',*,*,#107017,.T.); +#107017 = EDGE_CURVE('',#106644,#107018,#107020,.T.); +#107018 = VERTEX_POINT('',#107019); +#107019 = CARTESIAN_POINT('',(-6.575,-4.5,-9.6)); +#107020 = LINE('',#107021,#107022); +#107021 = CARTESIAN_POINT('',(-6.575,-3.3,-9.6)); +#107022 = VECTOR('',#107023,1.); +#107023 = DIRECTION('',(0.,-1.,0.)); +#107024 = ORIENTED_EDGE('',*,*,#107025,.T.); +#107025 = EDGE_CURVE('',#107018,#107026,#107028,.T.); +#107026 = VERTEX_POINT('',#107027); +#107027 = CARTESIAN_POINT('',(-6.575,-4.5,-13.00523257219)); +#107028 = LINE('',#107029,#107030); +#107029 = CARTESIAN_POINT('',(-6.575,-4.5,-9.6)); +#107030 = VECTOR('',#107031,1.); +#107031 = DIRECTION('',(0.,0.,-1.)); +#107032 = ORIENTED_EDGE('',*,*,#107033,.F.); +#107033 = EDGE_CURVE('',#107034,#107026,#107036,.T.); +#107034 = VERTEX_POINT('',#107035); +#107035 = CARTESIAN_POINT('',(-6.575,-4.794767427805,-13.3)); +#107036 = CIRCLE('',#107037,0.294767427805); +#107037 = AXIS2_PLACEMENT_3D('',#107038,#107039,#107040); +#107038 = CARTESIAN_POINT('',(-6.575,-4.794767427805,-13.00523257219)); +#107039 = DIRECTION('',(1.,0.,0.)); +#107040 = DIRECTION('',(0.,0.,-1.)); +#107041 = ORIENTED_EDGE('',*,*,#107042,.F.); +#107042 = EDGE_CURVE('',#107043,#107034,#107045,.T.); +#107043 = VERTEX_POINT('',#107044); +#107044 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.3)); +#107045 = LINE('',#107046,#107047); +#107046 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.3)); +#107047 = VECTOR('',#107048,1.); +#107048 = DIRECTION('',(0.,1.,0.)); +#107049 = ORIENTED_EDGE('',*,*,#107050,.F.); +#107050 = EDGE_CURVE('',#107051,#107043,#107053,.T.); +#107051 = VERTEX_POINT('',#107052); +#107052 = CARTESIAN_POINT('',(-6.575,-5.5,-13.00523257219)); +#107053 = CIRCLE('',#107054,0.294767427805); +#107054 = AXIS2_PLACEMENT_3D('',#107055,#107056,#107057); +#107055 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.00523257219)); +#107056 = DIRECTION('',(1.,0.,0.)); +#107057 = DIRECTION('',(0.,-1.,0.)); +#107058 = ORIENTED_EDGE('',*,*,#107059,.F.); +#107059 = EDGE_CURVE('',#107060,#107051,#107062,.T.); +#107060 = VERTEX_POINT('',#107061); +#107061 = CARTESIAN_POINT('',(-6.575,-5.5,-11.2)); +#107062 = LINE('',#107063,#107064); +#107063 = CARTESIAN_POINT('',(-6.575,-5.5,-11.2)); +#107064 = VECTOR('',#107065,1.); +#107065 = DIRECTION('',(0.,0.,-1.)); +#107066 = ORIENTED_EDGE('',*,*,#107067,.F.); +#107067 = EDGE_CURVE('',#107068,#107060,#107070,.T.); +#107068 = VERTEX_POINT('',#107069); +#107069 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#107070 = LINE('',#107071,#107072); +#107071 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#107072 = VECTOR('',#107073,1.); +#107073 = DIRECTION('',(0.,1.,0.)); +#107074 = ORIENTED_EDGE('',*,*,#107075,.F.); +#107075 = EDGE_CURVE('',#107076,#107068,#107078,.T.); +#107076 = VERTEX_POINT('',#107077); +#107077 = CARTESIAN_POINT('',(-6.575,-5.975,-5.7)); +#107078 = LINE('',#107079,#107080); +#107079 = CARTESIAN_POINT('',(-6.575,-5.975,-5.7)); +#107080 = VECTOR('',#107081,1.); +#107081 = DIRECTION('',(0.,0.,-1.)); +#107082 = ORIENTED_EDGE('',*,*,#107083,.F.); +#107083 = EDGE_CURVE('',#107084,#107076,#107086,.T.); +#107084 = VERTEX_POINT('',#107085); +#107085 = CARTESIAN_POINT('',(-6.575,-6.575,-5.7)); +#107086 = LINE('',#107087,#107088); +#107087 = CARTESIAN_POINT('',(-6.575,-6.575,-5.7)); +#107088 = VECTOR('',#107089,1.); +#107089 = DIRECTION('',(0.,1.,0.)); +#107090 = ORIENTED_EDGE('',*,*,#107091,.F.); +#107091 = EDGE_CURVE('',#107092,#107084,#107094,.T.); +#107092 = VERTEX_POINT('',#107093); +#107093 = CARTESIAN_POINT('',(-6.575,-6.575,-1.2)); +#107094 = LINE('',#107095,#107096); +#107095 = CARTESIAN_POINT('',(-6.575,-6.575,-1.2)); +#107096 = VECTOR('',#107097,1.); +#107097 = DIRECTION('',(0.,0.,-1.)); +#107098 = ORIENTED_EDGE('',*,*,#107099,.F.); +#107099 = EDGE_CURVE('',#107100,#107092,#107102,.T.); +#107100 = VERTEX_POINT('',#107101); +#107101 = CARTESIAN_POINT('',(-6.575,-5.707414107351,-0.419172696616)); +#107102 = LINE('',#107103,#107104); +#107103 = CARTESIAN_POINT('',(-6.575,-5.707414107351,-0.419172696616)); +#107104 = VECTOR('',#107105,1.); +#107105 = DIRECTION('',(0.,-0.743294146247,-0.668964731622)); +#107106 = ORIENTED_EDGE('',*,*,#107107,.T.); +#107107 = EDGE_CURVE('',#107100,#107108,#107110,.T.); +#107108 = VERTEX_POINT('',#107109); +#107109 = CARTESIAN_POINT('',(-6.575,-5.575,-0.121855038117)); +#107110 = CIRCLE('',#107111,0.4); +#107111 = AXIS2_PLACEMENT_3D('',#107112,#107113,#107114); +#107112 = CARTESIAN_POINT('',(-6.575,-5.975,-0.121855038117)); +#107113 = DIRECTION('',(1.,0.,0.)); +#107114 = DIRECTION('',(0.,0.668964731622,-0.743294146247)); +#107115 = ORIENTED_EDGE('',*,*,#107116,.F.); +#107116 = EDGE_CURVE('',#105229,#107108,#107117,.T.); +#107117 = LINE('',#107118,#107119); +#107118 = CARTESIAN_POINT('',(-6.575,-5.575,0.)); +#107119 = VECTOR('',#107120,1.); +#107120 = DIRECTION('',(1.457762327146E-14,1.457762327146E-14,-1.)); +#107121 = ORIENTED_EDGE('',*,*,#107122,.F.); +#107122 = EDGE_CURVE('',#107123,#105229,#107125,.T.); +#107123 = VERTEX_POINT('',#107124); +#107124 = CARTESIAN_POINT('',(-6.575,-4.291421356237,0.)); +#107125 = LINE('',#107126,#107127); +#107126 = CARTESIAN_POINT('',(-6.575,-4.291421356237,0.)); +#107127 = VECTOR('',#107128,1.); +#107128 = DIRECTION('',(0.,-1.,0.)); +#107129 = ORIENTED_EDGE('',*,*,#107130,.T.); +#107130 = EDGE_CURVE('',#107123,#107131,#107133,.T.); +#107131 = VERTEX_POINT('',#107132); +#107132 = CARTESIAN_POINT('',(-6.575,-4.15,-0.1)); +#107133 = CIRCLE('',#107134,0.15); +#107134 = AXIS2_PLACEMENT_3D('',#107135,#107136,#107137); +#107135 = CARTESIAN_POINT('',(-6.575,-4.15,5.E-02)); +#107136 = DIRECTION('',(1.,0.,0.)); +#107137 = DIRECTION('',(0.,-0.942809041582,-0.333333333333)); +#107138 = ORIENTED_EDGE('',*,*,#107139,.F.); +#107139 = EDGE_CURVE('',#107140,#107131,#107142,.T.); +#107140 = VERTEX_POINT('',#107141); +#107141 = CARTESIAN_POINT('',(-6.575,-2.95,-0.1)); +#107142 = LINE('',#107143,#107144); +#107143 = CARTESIAN_POINT('',(-6.575,-2.95,-0.1)); +#107144 = VECTOR('',#107145,1.); +#107145 = DIRECTION('',(0.,-1.,0.)); +#107146 = ORIENTED_EDGE('',*,*,#107147,.T.); +#107147 = EDGE_CURVE('',#107140,#107148,#107150,.T.); +#107148 = VERTEX_POINT('',#107149); +#107149 = CARTESIAN_POINT('',(-6.575,-2.808578643763,0.)); +#107150 = CIRCLE('',#107151,0.15); +#107151 = AXIS2_PLACEMENT_3D('',#107152,#107153,#107154); +#107152 = CARTESIAN_POINT('',(-6.575,-2.95,5.E-02)); +#107153 = DIRECTION('',(1.,0.,0.)); +#107154 = DIRECTION('',(0.,0.,-1.)); +#107155 = ORIENTED_EDGE('',*,*,#107156,.F.); +#107156 = EDGE_CURVE('',#107157,#107148,#107159,.T.); +#107157 = VERTEX_POINT('',#107158); +#107158 = CARTESIAN_POINT('',(-6.575,2.808578643763,0.)); +#107159 = LINE('',#107160,#107161); +#107160 = CARTESIAN_POINT('',(-6.575,2.808578643763,0.)); +#107161 = VECTOR('',#107162,1.); +#107162 = DIRECTION('',(0.,-1.,0.)); +#107163 = ORIENTED_EDGE('',*,*,#107164,.T.); +#107164 = EDGE_CURVE('',#107157,#107165,#107167,.T.); +#107165 = VERTEX_POINT('',#107166); +#107166 = CARTESIAN_POINT('',(-6.575,2.95,-0.1)); +#107167 = CIRCLE('',#107168,0.15); +#107168 = AXIS2_PLACEMENT_3D('',#107169,#107170,#107171); +#107169 = CARTESIAN_POINT('',(-6.575,2.95,5.E-02)); +#107170 = DIRECTION('',(1.,0.,0.)); +#107171 = DIRECTION('',(0.,-0.942809041582,-0.333333333333)); +#107172 = ORIENTED_EDGE('',*,*,#107173,.F.); +#107173 = EDGE_CURVE('',#107174,#107165,#107176,.T.); +#107174 = VERTEX_POINT('',#107175); +#107175 = CARTESIAN_POINT('',(-6.575,4.15,-0.1)); +#107176 = LINE('',#107177,#107178); +#107177 = CARTESIAN_POINT('',(-6.575,4.15,-0.1)); +#107178 = VECTOR('',#107179,1.); +#107179 = DIRECTION('',(0.,-1.,0.)); +#107180 = ORIENTED_EDGE('',*,*,#107181,.T.); +#107181 = EDGE_CURVE('',#107174,#107182,#107184,.T.); +#107182 = VERTEX_POINT('',#107183); +#107183 = CARTESIAN_POINT('',(-6.575,4.291421356237,0.)); +#107184 = CIRCLE('',#107185,0.15); +#107185 = AXIS2_PLACEMENT_3D('',#107186,#107187,#107188); +#107186 = CARTESIAN_POINT('',(-6.575,4.15,5.E-02)); +#107187 = DIRECTION('',(1.,0.,0.)); +#107188 = DIRECTION('',(0.,2.891205793295E-14,-1.)); +#107189 = ORIENTED_EDGE('',*,*,#107190,.F.); +#107190 = EDGE_CURVE('',#104822,#107182,#107191,.T.); +#107191 = LINE('',#107192,#107193); +#107192 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#107193 = VECTOR('',#107194,1.); +#107194 = DIRECTION('',(0.,-1.,0.)); +#107195 = ORIENTED_EDGE('',*,*,#107196,.F.); +#107196 = EDGE_CURVE('',#107197,#104822,#107199,.T.); +#107197 = VERTEX_POINT('',#107198); +#107198 = CARTESIAN_POINT('',(-6.575,5.575,-0.121855038117)); +#107199 = LINE('',#107200,#107201); +#107200 = CARTESIAN_POINT('',(-6.575,5.575,-0.121855038117)); +#107201 = VECTOR('',#107202,1.); +#107202 = DIRECTION('',(-1.457762327146E-14,1.457762327146E-14,1.)); +#107203 = ORIENTED_EDGE('',*,*,#107204,.T.); +#107204 = EDGE_CURVE('',#107197,#107205,#107207,.T.); +#107205 = VERTEX_POINT('',#107206); +#107206 = CARTESIAN_POINT('',(-6.575,5.707414107351,-0.419172696616)); +#107207 = CIRCLE('',#107208,0.4); +#107208 = AXIS2_PLACEMENT_3D('',#107209,#107210,#107211); +#107209 = CARTESIAN_POINT('',(-6.575,5.975,-0.121855038117)); +#107210 = DIRECTION('',(1.,0.,0.)); +#107211 = DIRECTION('',(0.,-1.,0.)); +#107212 = ORIENTED_EDGE('',*,*,#107213,.F.); +#107213 = EDGE_CURVE('',#107214,#107205,#107216,.T.); +#107214 = VERTEX_POINT('',#107215); +#107215 = CARTESIAN_POINT('',(-6.575,6.575,-1.2)); +#107216 = LINE('',#107217,#107218); +#107217 = CARTESIAN_POINT('',(-6.575,6.575,-1.2)); +#107218 = VECTOR('',#107219,1.); +#107219 = DIRECTION('',(0.,-0.743294146247,0.668964731622)); +#107220 = ORIENTED_EDGE('',*,*,#107221,.F.); +#107221 = EDGE_CURVE('',#107222,#107214,#107224,.T.); +#107222 = VERTEX_POINT('',#107223); +#107223 = CARTESIAN_POINT('',(-6.575,6.575,-5.7)); +#107224 = LINE('',#107225,#107226); +#107225 = CARTESIAN_POINT('',(-6.575,6.575,-5.7)); +#107226 = VECTOR('',#107227,1.); +#107227 = DIRECTION('',(0.,0.,1.)); +#107228 = ORIENTED_EDGE('',*,*,#107229,.F.); +#107229 = EDGE_CURVE('',#107230,#107222,#107232,.T.); +#107230 = VERTEX_POINT('',#107231); +#107231 = CARTESIAN_POINT('',(-6.575,5.975,-5.7)); +#107232 = LINE('',#107233,#107234); +#107233 = CARTESIAN_POINT('',(-6.575,5.975,-5.7)); +#107234 = VECTOR('',#107235,1.); +#107235 = DIRECTION('',(0.,1.,0.)); +#107236 = ORIENTED_EDGE('',*,*,#107237,.F.); +#107237 = EDGE_CURVE('',#107238,#107230,#107240,.T.); +#107238 = VERTEX_POINT('',#107239); +#107239 = CARTESIAN_POINT('',(-6.575,5.975,-11.2)); +#107240 = LINE('',#107241,#107242); +#107241 = CARTESIAN_POINT('',(-6.575,5.975,-11.2)); +#107242 = VECTOR('',#107243,1.); +#107243 = DIRECTION('',(0.,0.,1.)); +#107244 = ORIENTED_EDGE('',*,*,#107245,.F.); +#107245 = EDGE_CURVE('',#107246,#107238,#107248,.T.); +#107246 = VERTEX_POINT('',#107247); +#107247 = CARTESIAN_POINT('',(-6.575,5.5,-11.2)); +#107248 = LINE('',#107249,#107250); +#107249 = CARTESIAN_POINT('',(-6.575,5.5,-11.2)); +#107250 = VECTOR('',#107251,1.); +#107251 = DIRECTION('',(0.,1.,0.)); +#107252 = ORIENTED_EDGE('',*,*,#107253,.F.); +#107253 = EDGE_CURVE('',#107254,#107246,#107256,.T.); +#107254 = VERTEX_POINT('',#107255); +#107255 = CARTESIAN_POINT('',(-6.575,5.5,-13.00523257219)); +#107256 = LINE('',#107257,#107258); +#107257 = CARTESIAN_POINT('',(-6.575,5.5,-13.00523257219)); +#107258 = VECTOR('',#107259,1.); +#107259 = DIRECTION('',(0.,0.,1.)); +#107260 = ORIENTED_EDGE('',*,*,#107261,.F.); +#107261 = EDGE_CURVE('',#107262,#107254,#107264,.T.); +#107262 = VERTEX_POINT('',#107263); +#107263 = CARTESIAN_POINT('',(-6.575,5.205232572195,-13.3)); +#107264 = CIRCLE('',#107265,0.294767427805); +#107265 = AXIS2_PLACEMENT_3D('',#107266,#107267,#107268); +#107266 = CARTESIAN_POINT('',(-6.575,5.205232572195,-13.00523257219)); +#107267 = DIRECTION('',(1.,0.,0.)); +#107268 = DIRECTION('',(0.,0.,-1.)); +#107269 = ORIENTED_EDGE('',*,*,#107270,.F.); +#107270 = EDGE_CURVE('',#107271,#107262,#107273,.T.); +#107271 = VERTEX_POINT('',#107272); +#107272 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.3)); +#107273 = LINE('',#107274,#107275); +#107274 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.3)); +#107275 = VECTOR('',#107276,1.); +#107276 = DIRECTION('',(0.,1.,0.)); +#107277 = ORIENTED_EDGE('',*,*,#107278,.F.); +#107278 = EDGE_CURVE('',#107279,#107271,#107281,.T.); +#107279 = VERTEX_POINT('',#107280); +#107280 = CARTESIAN_POINT('',(-6.575,4.5,-13.00523257219)); +#107281 = CIRCLE('',#107282,0.294767427805); +#107282 = AXIS2_PLACEMENT_3D('',#107283,#107284,#107285); +#107283 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.00523257219)); +#107284 = DIRECTION('',(1.,0.,0.)); +#107285 = DIRECTION('',(0.,-1.,1.765517468019E-14)); +#107286 = ORIENTED_EDGE('',*,*,#107287,.T.); +#107287 = EDGE_CURVE('',#107279,#107288,#107290,.T.); +#107288 = VERTEX_POINT('',#107289); +#107289 = CARTESIAN_POINT('',(-6.575,4.5,-9.6)); +#107290 = LINE('',#107291,#107292); +#107291 = CARTESIAN_POINT('',(-6.575,4.5,-13.00523257219)); +#107292 = VECTOR('',#107293,1.); +#107293 = DIRECTION('',(0.,0.,1.)); +#107294 = ORIENTED_EDGE('',*,*,#107295,.T.); +#107295 = EDGE_CURVE('',#107288,#107296,#107298,.T.); +#107296 = VERTEX_POINT('',#107297); +#107297 = CARTESIAN_POINT('',(-6.575,3.3,-9.6)); +#107298 = LINE('',#107299,#107300); +#107299 = CARTESIAN_POINT('',(-6.575,4.5,-9.6)); +#107300 = VECTOR('',#107301,1.); +#107301 = DIRECTION('',(0.,-1.,0.)); +#107302 = ORIENTED_EDGE('',*,*,#107303,.F.); +#107303 = EDGE_CURVE('',#107304,#107296,#107306,.T.); +#107304 = VERTEX_POINT('',#107305); +#107305 = CARTESIAN_POINT('',(-6.575,3.3,-4.7)); +#107306 = LINE('',#107307,#107308); +#107307 = CARTESIAN_POINT('',(-6.575,3.3,-4.7)); +#107308 = VECTOR('',#107309,1.); +#107309 = DIRECTION('',(0.,0.,-1.)); +#107310 = ORIENTED_EDGE('',*,*,#107311,.F.); +#107311 = EDGE_CURVE('',#107312,#107304,#107314,.T.); +#107312 = VERTEX_POINT('',#107313); +#107313 = CARTESIAN_POINT('',(-6.575,1.6516,-4.7)); +#107314 = LINE('',#107315,#107316); +#107315 = CARTESIAN_POINT('',(-6.575,1.6516,-4.7)); +#107316 = VECTOR('',#107317,1.); +#107317 = DIRECTION('',(0.,1.,0.)); +#107318 = ORIENTED_EDGE('',*,*,#107319,.F.); +#107319 = EDGE_CURVE('',#107320,#107312,#107322,.T.); +#107320 = VERTEX_POINT('',#107321); +#107321 = CARTESIAN_POINT('',(-6.575,-1.6516,-4.7)); +#107322 = CIRCLE('',#107323,1.6516); +#107323 = AXIS2_PLACEMENT_3D('',#107324,#107325,#107326); +#107324 = CARTESIAN_POINT('',(-6.575,0.,-4.7)); +#107325 = DIRECTION('',(-1.,0.,0.)); +#107326 = DIRECTION('',(0.,-1.,0.)); +#107327 = ORIENTED_EDGE('',*,*,#107328,.F.); +#107328 = EDGE_CURVE('',#106635,#107320,#107329,.T.); +#107329 = LINE('',#107330,#107331); +#107330 = CARTESIAN_POINT('',(-6.575,-3.3,-4.7)); +#107331 = VECTOR('',#107332,1.); +#107332 = DIRECTION('',(0.,1.,0.)); +#107333 = ORIENTED_EDGE('',*,*,#106651,.F.); +#107334 = FACE_BOUND('',#107335,.T.); +#107335 = EDGE_LOOP('',(#107336,#107346,#107355,#107364,#107373,#107382, + #107391,#107400,#107409,#107418,#107426,#107435,#107444,#107453, + #107462,#107471,#107480,#107489)); +#107336 = ORIENTED_EDGE('',*,*,#107337,.F.); +#107337 = EDGE_CURVE('',#107338,#107340,#107342,.T.); +#107338 = VERTEX_POINT('',#107339); +#107339 = CARTESIAN_POINT('',(-6.575,3.557448991847,-1.47697108326)); +#107340 = VERTEX_POINT('',#107341); +#107341 = CARTESIAN_POINT('',(-6.575,3.729481711698,-1.45302836237)); +#107342 = LINE('',#107343,#107344); +#107343 = CARTESIAN_POINT('',(-6.575,3.557448991847,-1.47697108326)); +#107344 = VECTOR('',#107345,1.); +#107345 = DIRECTION('',(0.,0.990453567967,0.137846761668)); +#107346 = ORIENTED_EDGE('',*,*,#107347,.F.); +#107347 = EDGE_CURVE('',#107348,#107338,#107350,.T.); +#107348 = VERTEX_POINT('',#107349); +#107349 = CARTESIAN_POINT('',(-6.575,3.795046644888,-1.817565380018)); +#107350 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107351,#107352,#107353, + #107354),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107351 = CARTESIAN_POINT('',(-6.575,3.795046644888,-1.817565380018)); +#107352 = CARTESIAN_POINT('',(-6.575,3.691350754809,-1.741227550185)); +#107353 = CARTESIAN_POINT('',(-6.575,3.612428512883,-1.62772141037)); +#107354 = CARTESIAN_POINT('',(-6.575,3.557448991847,-1.47697108326)); +#107355 = ORIENTED_EDGE('',*,*,#107356,.F.); +#107356 = EDGE_CURVE('',#107357,#107348,#107359,.T.); +#107357 = VERTEX_POINT('',#107358); +#107358 = CARTESIAN_POINT('',(-6.575,4.145375314069,-1.932769167176)); +#107359 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107360,#107361,#107362, + #107363),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107360 = CARTESIAN_POINT('',(-6.575,4.145375314069,-1.932769167176)); +#107361 = CARTESIAN_POINT('',(-6.575,4.015907379699,-1.932769167176)); +#107362 = CARTESIAN_POINT('',(-6.575,3.899740931106,-1.894638199391)); +#107363 = CARTESIAN_POINT('',(-6.575,3.795046644888,-1.817565380018)); +#107364 = ORIENTED_EDGE('',*,*,#107365,.F.); +#107365 = EDGE_CURVE('',#107366,#107357,#107368,.T.); +#107366 = VERTEX_POINT('',#107367); +#107367 = CARTESIAN_POINT('',(-6.575,4.521586134592,-1.788438242598)); +#107368 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107369,#107370,#107371, + #107372),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107369 = CARTESIAN_POINT('',(-6.575,4.521586134592,-1.788438242598)); +#107370 = CARTESIAN_POINT('',(-6.575,4.42914065392,-1.884883764139)); +#107371 = CARTESIAN_POINT('',(-6.575,4.303219797921,-1.932769167176)); +#107372 = CARTESIAN_POINT('',(-6.575,4.145375314069,-1.932769167176)); +#107373 = ORIENTED_EDGE('',*,*,#107374,.F.); +#107374 = EDGE_CURVE('',#107375,#107366,#107377,.T.); +#107375 = VERTEX_POINT('',#107376); +#107376 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.374106120443)); +#107377 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107378,#107379,#107380, + #107381),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107378 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.374106120443)); +#107379 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.554119786)); +#107380 = CARTESIAN_POINT('',(-6.575,4.613588128698,-1.692455396926)); +#107381 = CARTESIAN_POINT('',(-6.575,4.521586134592,-1.788438242598)); +#107382 = ORIENTED_EDGE('',*,*,#107383,.F.); +#107383 = EDGE_CURVE('',#107384,#107375,#107386,.T.); +#107384 = VERTEX_POINT('',#107385); +#107385 = CARTESIAN_POINT('',(-6.575,4.448786425012,-0.793148265654)); +#107386 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107387,#107388,#107389, + #107390),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107387 = CARTESIAN_POINT('',(-6.575,4.448786425012,-0.793148265654)); +#107388 = CARTESIAN_POINT('',(-6.575,4.589645427179,-0.946684610224)); +#107389 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.139999722815)); +#107390 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.374106120443)); +#107391 = ORIENTED_EDGE('',*,*,#107392,.F.); +#107392 = EDGE_CURVE('',#107393,#107384,#107395,.T.); +#107393 = VERTEX_POINT('',#107394); +#107394 = CARTESIAN_POINT('',(-6.575,3.981323501182,-0.588430779552)); +#107395 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107396,#107397,#107398, + #107399),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107396 = CARTESIAN_POINT('',(-6.575,3.981323501182,-0.588430779552)); +#107397 = CARTESIAN_POINT('',(-6.575,4.16754445703,-0.588430779552)); +#107398 = CARTESIAN_POINT('',(-6.575,4.32361544044,-0.656711863851)); +#107399 = CARTESIAN_POINT('',(-6.575,4.448786425012,-0.793148265654)); +#107400 = ORIENTED_EDGE('',*,*,#107401,.F.); +#107401 = EDGE_CURVE('',#107402,#107393,#107404,.T.); +#107402 = VERTEX_POINT('',#107403); +#107403 = CARTESIAN_POINT('',(-6.575,3.647231599773,-0.699529431334)); +#107404 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107405,#107406,#107407, + #107408),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107405 = CARTESIAN_POINT('',(-6.575,3.647231599773,-0.699529431334)); +#107406 = CARTESIAN_POINT('',(-6.575,3.732142039847,-0.625675063705)); +#107407 = CARTESIAN_POINT('',(-6.575,3.843874659848,-0.588430779552)); +#107408 = CARTESIAN_POINT('',(-6.575,3.981323501182,-0.588430779552)); +#107409 = ORIENTED_EDGE('',*,*,#107410,.F.); +#107410 = EDGE_CURVE('',#107411,#107402,#107413,.T.); +#107411 = VERTEX_POINT('',#107412); +#107412 = CARTESIAN_POINT('',(-6.575,3.498035642219,-0.997230302668)); +#107413 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107414,#107415,#107416, + #107417),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107414 = CARTESIAN_POINT('',(-6.575,3.498035642219,-0.997230302668)); +#107415 = CARTESIAN_POINT('',(-6.575,3.512223955703,-0.873082947111)); +#107416 = CARTESIAN_POINT('',(-6.575,3.561882820439,-0.773765062666)); +#107417 = CARTESIAN_POINT('',(-6.575,3.647231599773,-0.699529431334)); +#107418 = ORIENTED_EDGE('',*,*,#107419,.F.); +#107419 = EDGE_CURVE('',#107420,#107411,#107422,.T.); +#107420 = VERTEX_POINT('',#107421); +#107421 = CARTESIAN_POINT('',(-6.575,3.660313954663,-1.012305288887)); +#107422 = LINE('',#107423,#107424); +#107423 = CARTESIAN_POINT('',(-6.575,3.660313954663,-1.012305288887)); +#107424 = VECTOR('',#107425,1.); +#107425 = DIRECTION('',(0.,-0.995712905188,9.249762397742E-02)); +#107426 = ORIENTED_EDGE('',*,*,#107427,.F.); +#107427 = EDGE_CURVE('',#107428,#107420,#107430,.T.); +#107428 = VERTEX_POINT('',#107429); +#107429 = CARTESIAN_POINT('',(-6.575,3.766725918365,-0.802141612148)); +#107430 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107431,#107432,#107433, + #107434),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107431 = CARTESIAN_POINT('',(-6.575,3.766725918365,-0.802141612148)); +#107432 = CARTESIAN_POINT('',(-6.575,3.713519897771,-0.848253476)); +#107433 = CARTESIAN_POINT('',(-6.575,3.678049269032,-0.918308060741)); +#107434 = CARTESIAN_POINT('',(-6.575,3.660313954663,-1.012305288887)); +#107435 = ORIENTED_EDGE('',*,*,#107436,.F.); +#107436 = EDGE_CURVE('',#107437,#107428,#107439,.T.); +#107437 = VERTEX_POINT('',#107438); +#107438 = CARTESIAN_POINT('',(-6.575,3.973342594218,-0.732087027407)); +#107439 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107440,#107441,#107442, + #107443),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107440 = CARTESIAN_POINT('',(-6.575,3.973342594218,-0.732087027407)); +#107441 = CARTESIAN_POINT('',(-6.575,3.889099695992,-0.732087027407)); +#107442 = CARTESIAN_POINT('',(-6.575,3.819931938958,-0.756029748297)); +#107443 = CARTESIAN_POINT('',(-6.575,3.766725918365,-0.802141612148)); +#107444 = ORIENTED_EDGE('',*,*,#107445,.F.); +#107445 = EDGE_CURVE('',#107446,#107437,#107448,.T.); +#107446 = VERTEX_POINT('',#107447); +#107447 = CARTESIAN_POINT('',(-6.575,4.359255511347,-0.943906934137)); +#107448 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107449,#107450,#107451, + #107452),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107449 = CARTESIAN_POINT('',(-6.575,4.359255511347,-0.943906934137)); +#107450 = CARTESIAN_POINT('',(-6.575,4.261541762662,-0.803028362369)); +#107451 = CARTESIAN_POINT('',(-6.575,4.132960578513,-0.732087027407)); +#107452 = CARTESIAN_POINT('',(-6.575,3.973342594218,-0.732087027407)); +#107453 = ORIENTED_EDGE('',*,*,#107454,.F.); +#107454 = EDGE_CURVE('',#107455,#107446,#107457,.T.); +#107455 = VERTEX_POINT('',#107456); +#107456 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653198814)); +#107457 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107458,#107459,#107460, + #107461),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107458 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653198814)); +#107459 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.210941057777)); +#107460 = CARTESIAN_POINT('',(-6.575,4.444215678883,-1.066398059702)); +#107461 = CARTESIAN_POINT('',(-6.575,4.359255511347,-0.943906934137)); +#107462 = ORIENTED_EDGE('',*,*,#107463,.F.); +#107463 = EDGE_CURVE('',#107464,#107455,#107466,.T.); +#107464 = VERTEX_POINT('',#107465); +#107465 = CARTESIAN_POINT('',(-6.575,4.388570197286,-1.683793884664)); +#107466 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107467,#107468,#107469, + #107470),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107467 = CARTESIAN_POINT('',(-6.575,4.388570197286,-1.683793884664)); +#107468 = CARTESIAN_POINT('',(-6.575,4.453970125031,-1.613533155)); +#107469 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.511554961777)); +#107470 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653198814)); +#107471 = ORIENTED_EDGE('',*,*,#107472,.F.); +#107472 = EDGE_CURVE('',#107473,#107464,#107475,.T.); +#107473 = VERTEX_POINT('',#107474); +#107474 = CARTESIAN_POINT('',(-6.575,4.132073828292,-1.789112962908)); +#107475 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107476,#107477,#107478, + #107479),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107476 = CARTESIAN_POINT('',(-6.575,4.132073828292,-1.789112962908)); +#107477 = CARTESIAN_POINT('',(-6.575,4.237599041772,-1.789112962908)); +#107478 = CARTESIAN_POINT('',(-6.575,4.322728651476,-1.754529055333)); +#107479 = CARTESIAN_POINT('',(-6.575,4.388570197286,-1.683793884664)); +#107480 = ORIENTED_EDGE('',*,*,#107481,.F.); +#107481 = EDGE_CURVE('',#107482,#107473,#107484,.T.); +#107482 = VERTEX_POINT('',#107483); +#107483 = CARTESIAN_POINT('',(-6.575,3.888212958637,-1.701323038126)); +#107484 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107485,#107486,#107487, + #107488),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107485 = CARTESIAN_POINT('',(-6.575,3.888212958637,-1.701323038126)); +#107486 = CARTESIAN_POINT('',(-6.575,3.960927858663,-1.759849663204)); +#107487 = CARTESIAN_POINT('',(-6.575,4.042510351253,-1.789112962908)); +#107488 = CARTESIAN_POINT('',(-6.575,4.132073828292,-1.789112962908)); +#107489 = ORIENTED_EDGE('',*,*,#107490,.F.); +#107490 = EDGE_CURVE('',#107340,#107482,#107491,.T.); +#107491 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#107492,#107493,#107494, + #107495),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#107492 = CARTESIAN_POINT('',(-6.575,3.729481711698,-1.45302836237)); +#107493 = CARTESIAN_POINT('',(-6.575,3.763178839993,-1.560327153778)); +#107494 = CARTESIAN_POINT('',(-6.575,3.815498110366,-1.642796454704)); +#107495 = CARTESIAN_POINT('',(-6.575,3.888212958637,-1.701323038126)); +#107496 = FACE_BOUND('',#107497,.T.); +#107497 = EDGE_LOOP('',(#107498,#107508,#107516,#107524,#107532,#107540, + #107548,#107556,#107564,#107572,#107580,#107588)); +#107498 = ORIENTED_EDGE('',*,*,#107499,.F.); +#107499 = EDGE_CURVE('',#107500,#107502,#107504,.T.); +#107500 = VERTEX_POINT('',#107501); +#107501 = CARTESIAN_POINT('',(-6.575,2.65649403007,-0.6106)); +#107502 = VERTEX_POINT('',#107503); +#107503 = CARTESIAN_POINT('',(-6.575,2.92784455688,-1.9106)); +#107504 = LINE('',#107505,#107506); +#107505 = CARTESIAN_POINT('',(-6.575,2.65649403007,-0.6106)); +#107506 = VECTOR('',#107507,1.); +#107507 = DIRECTION('',(0.,0.204327487018,-0.978902588641)); +#107508 = ORIENTED_EDGE('',*,*,#107509,.F.); +#107509 = EDGE_CURVE('',#107510,#107500,#107512,.T.); +#107510 = VERTEX_POINT('',#107511); +#107511 = CARTESIAN_POINT('',(-6.575,2.482687732291,-0.6106)); +#107512 = LINE('',#107513,#107514); +#107513 = CARTESIAN_POINT('',(-6.575,2.482687732291,-0.6106)); +#107514 = VECTOR('',#107515,1.); +#107515 = DIRECTION('',(0.,1.,0.)); +#107516 = ORIENTED_EDGE('',*,*,#107517,.F.); +#107517 = EDGE_CURVE('',#107518,#107510,#107520,.T.); +#107518 = VERTEX_POINT('',#107519); +#107519 = CARTESIAN_POINT('',(-6.575,2.613042494369,-1.23665727911)); +#107520 = LINE('',#107521,#107522); +#107521 = CARTESIAN_POINT('',(-6.575,2.613042494369,-1.23665727911)); +#107522 = VECTOR('',#107523,1.); +#107523 = DIRECTION('',(0.,-0.203843591309,0.979003467962)); +#107524 = ORIENTED_EDGE('',*,*,#107525,.F.); +#107525 = EDGE_CURVE('',#107526,#107518,#107528,.T.); +#107526 = VERTEX_POINT('',#107527); +#107527 = CARTESIAN_POINT('',(-6.575,1.907176145625,-0.6106)); +#107528 = LINE('',#107529,#107530); +#107529 = CARTESIAN_POINT('',(-6.575,1.907176145625,-0.6106)); +#107530 = VECTOR('',#107531,1.); +#107531 = DIRECTION('',(0.,0.748134871138,-0.6635466936)); +#107532 = ORIENTED_EDGE('',*,*,#107533,.F.); +#107533 = EDGE_CURVE('',#107534,#107526,#107536,.T.); +#107534 = VERTEX_POINT('',#107535); +#107535 = CARTESIAN_POINT('',(-6.575,1.662428435397,-0.6106)); +#107536 = LINE('',#107537,#107538); +#107537 = CARTESIAN_POINT('',(-6.575,1.662428435397,-0.6106)); +#107538 = VECTOR('',#107539,1.); +#107539 = DIRECTION('',(0.,1.,0.)); +#107540 = ORIENTED_EDGE('',*,*,#107541,.F.); +#107541 = EDGE_CURVE('',#107542,#107534,#107544,.T.); +#107542 = VERTEX_POINT('',#107543); +#107543 = CARTESIAN_POINT('',(-6.575,2.266316649032,-1.139999722815)); +#107544 = LINE('',#107545,#107546); +#107545 = CARTESIAN_POINT('',(-6.575,2.266316649032,-1.139999722815)); +#107546 = VECTOR('',#107547,1.); +#107547 = DIRECTION('',(0.,-0.751960796865,0.659207827607)); +#107548 = ORIENTED_EDGE('',*,*,#107549,.F.); +#107549 = EDGE_CURVE('',#107550,#107542,#107552,.T.); +#107550 = VERTEX_POINT('',#107551); +#107551 = CARTESIAN_POINT('',(-6.575,1.823820075107,-1.9106)); +#107552 = LINE('',#107553,#107554); +#107553 = CARTESIAN_POINT('',(-6.575,1.823820075107,-1.9106)); +#107554 = VECTOR('',#107555,1.); +#107555 = DIRECTION('',(0.,0.497964796055,0.867197245089)); +#107556 = ORIENTED_EDGE('',*,*,#107557,.F.); +#107557 = EDGE_CURVE('',#107558,#107550,#107560,.T.); +#107558 = VERTEX_POINT('',#107559); +#107559 = CARTESIAN_POINT('',(-6.575,2.018022092891,-1.9106)); +#107560 = LINE('',#107561,#107562); +#107561 = CARTESIAN_POINT('',(-6.575,2.018022092891,-1.9106)); +#107562 = VECTOR('',#107563,1.); +#107563 = DIRECTION('',(0.,-1.,0.)); +#107564 = ORIENTED_EDGE('',*,*,#107565,.F.); +#107565 = EDGE_CURVE('',#107566,#107558,#107568,.T.); +#107566 = VERTEX_POINT('',#107567); +#107567 = CARTESIAN_POINT('',(-6.575,2.393124255252,-1.251732342815)); +#107568 = LINE('',#107569,#107570); +#107569 = CARTESIAN_POINT('',(-6.575,2.393124255252,-1.251732342815)); +#107570 = VECTOR('',#107571,1.); +#107571 = DIRECTION('',(0.,-0.49475259637,-0.869033870678)); +#107572 = ORIENTED_EDGE('',*,*,#107573,.F.); +#107573 = EDGE_CURVE('',#107574,#107566,#107576,.T.); +#107574 = VERTEX_POINT('',#107575); +#107575 = CARTESIAN_POINT('',(-6.575,2.665361687255,-1.488499029851)); +#107576 = LINE('',#107577,#107578); +#107577 = CARTESIAN_POINT('',(-6.575,2.665361687255,-1.488499029851)); +#107578 = VECTOR('',#107579,1.); +#107579 = DIRECTION('',(0.,-0.754552702119,0.656239453039)); +#107580 = ORIENTED_EDGE('',*,*,#107581,.F.); +#107581 = EDGE_CURVE('',#107582,#107574,#107584,.T.); +#107582 = VERTEX_POINT('',#107583); +#107583 = CARTESIAN_POINT('',(-6.575,2.754038414073,-1.9106)); +#107584 = LINE('',#107585,#107586); +#107585 = CARTESIAN_POINT('',(-6.575,2.754038414073,-1.9106)); +#107586 = VECTOR('',#107587,1.); +#107587 = DIRECTION('',(0.,-0.205596114881,0.978636928358)); +#107588 = ORIENTED_EDGE('',*,*,#107589,.F.); +#107589 = EDGE_CURVE('',#107502,#107582,#107590,.T.); +#107590 = LINE('',#107591,#107592); +#107591 = CARTESIAN_POINT('',(-6.575,2.92784455688,-1.9106)); +#107592 = VECTOR('',#107593,1.); +#107593 = DIRECTION('',(0.,-1.,0.)); +#107594 = FACE_BOUND('',#107595,.T.); +#107595 = EDGE_LOOP('',(#107596,#107606,#107614,#107622,#107630,#107638, + #107646,#107654,#107662,#107670,#107678,#107686,#107694,#107702, + #107710,#107718,#107726,#107734,#107742,#107750,#107758,#107766, + #107774,#107782,#107790,#107798,#107806,#107814)); +#107596 = ORIENTED_EDGE('',*,*,#107597,.F.); +#107597 = EDGE_CURVE('',#107598,#107600,#107602,.T.); +#107598 = VERTEX_POINT('',#107599); +#107599 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-1.01971278739)); +#107600 = VERTEX_POINT('',#107601); +#107601 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.711202124774)); +#107602 = LINE('',#107603,#107604); +#107603 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-1.01971278739)); +#107604 = VECTOR('',#107605,1.); +#107605 = DIRECTION('',(0.,0.738922954902,-0.673789927736)); +#107606 = ORIENTED_EDGE('',*,*,#107607,.F.); +#107607 = EDGE_CURVE('',#107608,#107598,#107610,.T.); +#107608 = VERTEX_POINT('',#107609); +#107609 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.909074502706)); +#107610 = LINE('',#107611,#107612); +#107611 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.909074502706)); +#107612 = VECTOR('',#107613,1.); +#107613 = DIRECTION('',(0.,0.439713664957,-0.898138014367)); +#107614 = ORIENTED_EDGE('',*,*,#107615,.F.); +#107615 = EDGE_CURVE('',#107616,#107608,#107618,.T.); +#107616 = VERTEX_POINT('',#107617); +#107617 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.853755282879)); +#107618 = LINE('',#107619,#107620); +#107619 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.853755282879)); +#107620 = VECTOR('',#107621,1.); +#107621 = DIRECTION('',(0.,0.,-1.)); +#107622 = ORIENTED_EDGE('',*,*,#107623,.F.); +#107623 = EDGE_CURVE('',#107624,#107616,#107626,.T.); +#107624 = VERTEX_POINT('',#107625); +#107625 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-0.770776569367)); +#107626 = LINE('',#107627,#107628); +#107627 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-0.770776569367)); +#107628 = VECTOR('',#107629,1.); +#107629 = DIRECTION('',(0.,-0.546622729396,-0.837379001234)); +#107630 = ORIENTED_EDGE('',*,*,#107631,.F.); +#107631 = EDGE_CURVE('',#107632,#107624,#107634,.T.); +#107632 = VERTEX_POINT('',#107633); +#107633 = CARTESIAN_POINT('',(-6.575,-2.018283307505,-0.715457427025)); +#107634 = LINE('',#107635,#107636); +#107635 = CARTESIAN_POINT('',(-6.575,-2.018283307505,-0.715457427025)); +#107636 = VECTOR('',#107637,1.); +#107637 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#107638 = ORIENTED_EDGE('',*,*,#107639,.F.); +#107639 = EDGE_CURVE('',#107640,#107632,#107642,.T.); +#107640 = VERTEX_POINT('',#107641); +#107641 = CARTESIAN_POINT('',(-6.575,-1.882866653752,-0.687797855854)); +#107642 = LINE('',#107643,#107644); +#107643 = CARTESIAN_POINT('',(-6.575,-1.882866653752,-0.687797855854)); +#107644 = VECTOR('',#107645,1.); +#107645 = DIRECTION('',(0.,-0.979770705536,-0.200123373381)); +#107646 = ORIENTED_EDGE('',*,*,#107647,.F.); +#107647 = EDGE_CURVE('',#107648,#107640,#107650,.T.); +#107648 = VERTEX_POINT('',#107649); +#107649 = CARTESIAN_POINT('',(-6.575,-1.774533346248,-0.687797855854)); +#107650 = LINE('',#107651,#107652); +#107651 = CARTESIAN_POINT('',(-6.575,-1.774533346248,-0.687797855854)); +#107652 = VECTOR('',#107653,1.); +#107653 = DIRECTION('',(0.,-1.,0.)); +#107654 = ORIENTED_EDGE('',*,*,#107655,.F.); +#107655 = EDGE_CURVE('',#107656,#107648,#107658,.T.); +#107656 = VERTEX_POINT('',#107657); +#107657 = CARTESIAN_POINT('',(-6.575,-1.639116673124,-0.715457427025)); +#107658 = LINE('',#107659,#107660); +#107659 = CARTESIAN_POINT('',(-6.575,-1.639116673124,-0.715457427025)); +#107660 = VECTOR('',#107661,1.); +#107661 = DIRECTION('',(0.,-0.979770711149,0.200123345899)); +#107662 = ORIENTED_EDGE('',*,*,#107663,.F.); +#107663 = EDGE_CURVE('',#107664,#107656,#107666,.T.); +#107664 = VERTEX_POINT('',#107665); +#107665 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-0.770776569367)); +#107666 = LINE('',#107667,#107668); +#107667 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-0.770776569367)); +#107668 = VECTOR('',#107669,1.); +#107669 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#107670 = ORIENTED_EDGE('',*,*,#107671,.F.); +#107671 = EDGE_CURVE('',#107672,#107664,#107674,.T.); +#107672 = VERTEX_POINT('',#107673); +#107673 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.853755282879)); +#107674 = LINE('',#107675,#107676); +#107675 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.853755282879)); +#107676 = VECTOR('',#107677,1.); +#107677 = DIRECTION('',(0.,-0.546622592319,0.837379090715)); +#107678 = ORIENTED_EDGE('',*,*,#107679,.F.); +#107679 = EDGE_CURVE('',#107680,#107672,#107682,.T.); +#107680 = VERTEX_POINT('',#107681); +#107681 = CARTESIAN_POINT('',(-6.575,-1.36828333414,-0.853755282879)); +#107682 = LINE('',#107683,#107684); +#107683 = CARTESIAN_POINT('',(-6.575,-1.36828333414,-0.853755282879)); +#107684 = VECTOR('',#107685,1.); +#107685 = DIRECTION('',(0.,-1.,0.)); +#107686 = ORIENTED_EDGE('',*,*,#107687,.F.); +#107687 = EDGE_CURVE('',#107688,#107680,#107690,.T.); +#107688 = VERTEX_POINT('',#107689); +#107689 = CARTESIAN_POINT('',(-6.575,-1.395366668281,-0.743116998196)); +#107690 = LINE('',#107691,#107692); +#107691 = CARTESIAN_POINT('',(-6.575,-1.395366668281,-0.743116998196)); +#107692 = VECTOR('',#107693,1.); +#107693 = DIRECTION('',(0.,0.237771359153,-0.971321152228)); +#107694 = ORIENTED_EDGE('',*,*,#107695,.F.); +#107695 = EDGE_CURVE('',#107696,#107688,#107698,.T.); +#107696 = VERTEX_POINT('',#107697); +#107697 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.632478713512)); +#107698 = LINE('',#107699,#107700); +#107699 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.632478713512)); +#107700 = VECTOR('',#107701,1.); +#107701 = DIRECTION('',(0.,0.699624829865,-0.714510390013)); +#107702 = ORIENTED_EDGE('',*,*,#107703,.F.); +#107703 = EDGE_CURVE('',#107704,#107696,#107706,.T.); +#107704 = VERTEX_POINT('',#107705); +#107705 = CARTESIAN_POINT('',(-6.575,-1.612033326876,-0.577159571171)); +#107706 = LINE('',#107707,#107708); +#107707 = CARTESIAN_POINT('',(-6.575,-1.612033326876,-0.577159571171)); +#107708 = VECTOR('',#107709,1.); +#107709 = DIRECTION('',(0.,0.890605275887,-0.454777135048)); +#107710 = ORIENTED_EDGE('',*,*,#107711,.F.); +#107711 = EDGE_CURVE('',#107712,#107704,#107714,.T.); +#107712 = VERTEX_POINT('',#107713); +#107713 = CARTESIAN_POINT('',(-6.575,-1.801616653752,-0.5495)); +#107714 = LINE('',#107715,#107716); +#107715 = CARTESIAN_POINT('',(-6.575,-1.801616653752,-0.5495)); +#107716 = VECTOR('',#107717,1.); +#107717 = DIRECTION('',(0.,0.989524033317,-0.144368235729)); +#107718 = ORIENTED_EDGE('',*,*,#107719,.F.); +#107719 = EDGE_CURVE('',#107720,#107712,#107722,.T.); +#107720 = VERTEX_POINT('',#107721); +#107721 = CARTESIAN_POINT('',(-6.575,-1.90995,-0.5495)); +#107722 = LINE('',#107723,#107724); +#107723 = CARTESIAN_POINT('',(-6.575,-1.90995,-0.5495)); +#107724 = VECTOR('',#107725,1.); +#107725 = DIRECTION('',(0.,1.,0.)); +#107726 = ORIENTED_EDGE('',*,*,#107727,.F.); +#107727 = EDGE_CURVE('',#107728,#107720,#107730,.T.); +#107728 = VERTEX_POINT('',#107729); +#107729 = CARTESIAN_POINT('',(-6.575,-2.07245,-0.577159571171)); +#107730 = LINE('',#107731,#107732); +#107731 = CARTESIAN_POINT('',(-6.575,-2.07245,-0.577159571171)); +#107732 = VECTOR('',#107733,1.); +#107733 = DIRECTION('',(0.,0.985821173093,0.167799328608)); +#107734 = ORIENTED_EDGE('',*,*,#107735,.F.); +#107735 = EDGE_CURVE('',#107736,#107728,#107738,.T.); +#107736 = VERTEX_POINT('',#107737); +#107737 = CARTESIAN_POINT('',(-6.575,-2.180783307505,-0.632478713512)); +#107738 = LINE('',#107739,#107740); +#107739 = CARTESIAN_POINT('',(-6.575,-2.180783307505,-0.632478713512)); +#107740 = VECTOR('',#107741,1.); +#107741 = DIRECTION('',(0.,0.89060524295,0.45477719955)); +#107742 = ORIENTED_EDGE('',*,*,#107743,.F.); +#107743 = EDGE_CURVE('',#107744,#107736,#107746,.T.); +#107744 = VERTEX_POINT('',#107745); +#107745 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-0.743116998196)); +#107746 = LINE('',#107747,#107748); +#107747 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-0.743116998196)); +#107748 = VECTOR('',#107749,1.); +#107749 = DIRECTION('',(0.,0.699625005502,0.714510218035)); +#107750 = ORIENTED_EDGE('',*,*,#107751,.F.); +#107751 = EDGE_CURVE('',#107752,#107744,#107754,.T.); +#107752 = VERTEX_POINT('',#107753); +#107753 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.853755282879)); +#107754 = LINE('',#107755,#107756); +#107755 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.853755282879)); +#107756 = VECTOR('',#107757,1.); +#107757 = DIRECTION('',(0.,0.237771138531,0.971321206235)); +#107758 = ORIENTED_EDGE('',*,*,#107759,.F.); +#107759 = EDGE_CURVE('',#107760,#107752,#107762,.T.); +#107760 = VERTEX_POINT('',#107761); +#107761 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.909074502706)); +#107762 = LINE('',#107763,#107764); +#107763 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.909074502706)); +#107764 = VECTOR('',#107765,1.); +#107765 = DIRECTION('',(0.,0.,1.)); +#107766 = ORIENTED_EDGE('',*,*,#107767,.F.); +#107767 = EDGE_CURVE('',#107768,#107760,#107770,.T.); +#107768 = VERTEX_POINT('',#107769); +#107769 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-1.01971278739)); +#107770 = LINE('',#107771,#107772); +#107771 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-1.01971278739)); +#107772 = VECTOR('',#107773,1.); +#107773 = DIRECTION('',(0.,-0.237771138531,0.971321206235)); +#107774 = ORIENTED_EDGE('',*,*,#107775,.F.); +#107775 = EDGE_CURVE('',#107776,#107768,#107778,.T.); +#107776 = VERTEX_POINT('',#107777); +#107777 = CARTESIAN_POINT('',(-6.575,-2.23495,-1.102691500902)); +#107778 = LINE('',#107779,#107780); +#107779 = CARTESIAN_POINT('',(-6.575,-2.23495,-1.102691500902)); +#107780 = VECTOR('',#107781,1.); +#107781 = DIRECTION('',(0.,-0.546622729396,0.837379001234)); +#107782 = ORIENTED_EDGE('',*,*,#107783,.F.); +#107783 = EDGE_CURVE('',#107784,#107776,#107786,.T.); +#107784 = VERTEX_POINT('',#107785); +#107785 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-1.711202124774)); +#107786 = LINE('',#107787,#107788); +#107787 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-1.711202124774)); +#107788 = VECTOR('',#107789,1.); +#107789 = DIRECTION('',(0.,-0.743766087257,0.668439980437)); +#107790 = ORIENTED_EDGE('',*,*,#107791,.F.); +#107791 = EDGE_CURVE('',#107792,#107784,#107794,.T.); +#107792 = VERTEX_POINT('',#107793); +#107793 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.711202124774)); +#107794 = LINE('',#107795,#107796); +#107795 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.711202124774)); +#107796 = VECTOR('',#107797,1.); +#107797 = DIRECTION('',(0.,1.,0.)); +#107798 = ORIENTED_EDGE('',*,*,#107799,.F.); +#107799 = EDGE_CURVE('',#107800,#107792,#107802,.T.); +#107800 = VERTEX_POINT('',#107801); +#107801 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.8495)); +#107802 = LINE('',#107803,#107804); +#107803 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.8495)); +#107804 = VECTOR('',#107805,1.); +#107805 = DIRECTION('',(0.,0.,1.)); +#107806 = ORIENTED_EDGE('',*,*,#107807,.F.); +#107807 = EDGE_CURVE('',#107808,#107800,#107810,.T.); +#107808 = VERTEX_POINT('',#107809); +#107809 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.8495)); +#107810 = LINE('',#107811,#107812); +#107811 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.8495)); +#107812 = VECTOR('',#107813,1.); +#107813 = DIRECTION('',(0.,-1.,0.)); +#107814 = ORIENTED_EDGE('',*,*,#107815,.F.); +#107815 = EDGE_CURVE('',#107600,#107808,#107816,.T.); +#107816 = LINE('',#107817,#107818); +#107817 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.711202124774)); +#107818 = VECTOR('',#107819,1.); +#107819 = DIRECTION('',(0.,0.,-1.)); +#107820 = FACE_BOUND('',#107821,.T.); +#107821 = EDGE_LOOP('',(#107822,#107832,#107840,#107848,#107856,#107864, + #107872)); +#107822 = ORIENTED_EDGE('',*,*,#107823,.F.); +#107823 = EDGE_CURVE('',#107824,#107826,#107828,.T.); +#107824 = VERTEX_POINT('',#107825); +#107825 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-1.8495)); +#107826 = VERTEX_POINT('',#107827); +#107827 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-1.8495)); +#107828 = LINE('',#107829,#107830); +#107829 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-1.8495)); +#107830 = VECTOR('',#107831,1.); +#107831 = DIRECTION('',(0.,-1.,0.)); +#107832 = ORIENTED_EDGE('',*,*,#107833,.F.); +#107833 = EDGE_CURVE('',#107834,#107824,#107836,.T.); +#107834 = VERTEX_POINT('',#107835); +#107835 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.770776569367)); +#107836 = LINE('',#107837,#107838); +#107837 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.770776569367)); +#107838 = VECTOR('',#107839,1.); +#107839 = DIRECTION('',(0.,0.,-1.)); +#107840 = ORIENTED_EDGE('',*,*,#107841,.F.); +#107841 = EDGE_CURVE('',#107842,#107834,#107844,.T.); +#107842 = VERTEX_POINT('',#107843); +#107843 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.964393645048)); +#107844 = LINE('',#107845,#107846); +#107845 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.964393645048)); +#107846 = VECTOR('',#107847,1.); +#107847 = DIRECTION('',(0.,-0.642870962909,0.765974493732)); +#107848 = ORIENTED_EDGE('',*,*,#107849,.F.); +#107849 = EDGE_CURVE('',#107850,#107842,#107852,.T.); +#107850 = VERTEX_POINT('',#107851); +#107851 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.743116998196)); +#107852 = LINE('',#107853,#107854); +#107853 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.743116998196)); +#107854 = VECTOR('',#107855,1.); +#107855 = DIRECTION('',(0.,0.,-1.)); +#107856 = ORIENTED_EDGE('',*,*,#107857,.F.); +#107857 = EDGE_CURVE('',#107858,#107850,#107860,.T.); +#107858 = VERTEX_POINT('',#107859); +#107859 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.5495)); +#107860 = LINE('',#107861,#107862); +#107861 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.5495)); +#107862 = VECTOR('',#107863,1.); +#107863 = DIRECTION('',(0.,0.642871113859,-0.765974367042)); +#107864 = ORIENTED_EDGE('',*,*,#107865,.F.); +#107865 = EDGE_CURVE('',#107866,#107858,#107868,.T.); +#107866 = VERTEX_POINT('',#107867); +#107867 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-0.5495)); +#107868 = LINE('',#107869,#107870); +#107869 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-0.5495)); +#107870 = VECTOR('',#107871,1.); +#107871 = DIRECTION('',(0.,1.,0.)); +#107872 = ORIENTED_EDGE('',*,*,#107873,.F.); +#107873 = EDGE_CURVE('',#107826,#107866,#107874,.T.); +#107874 = LINE('',#107875,#107876); +#107875 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-1.8495)); +#107876 = VECTOR('',#107877,1.); +#107877 = DIRECTION('',(0.,0.,1.)); +#107878 = FACE_BOUND('',#107879,.T.); +#107879 = EDGE_LOOP('',(#107880,#107890,#107898,#107906,#107914,#107922, + #107930,#107938,#107946,#107954,#107962,#107970,#107978,#107986, + #107994,#108002,#108010,#108018,#108026,#108034,#108042,#108050, + #108058,#108066,#108074,#108082)); +#107880 = ORIENTED_EDGE('',*,*,#107881,.F.); +#107881 = EDGE_CURVE('',#107882,#107884,#107886,.T.); +#107882 = VERTEX_POINT('',#107883); +#107883 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-0.936734073877)); +#107884 = VERTEX_POINT('',#107885); +#107885 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.075031929731)); +#107886 = LINE('',#107887,#107888); +#107887 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-0.936734073877)); +#107888 = VECTOR('',#107889,1.); +#107889 = DIRECTION('',(0.,0.192182147373,-0.98135927276)); +#107890 = ORIENTED_EDGE('',*,*,#107891,.F.); +#107891 = EDGE_CURVE('',#107892,#107882,#107894,.T.); +#107892 = VERTEX_POINT('',#107893); +#107893 = CARTESIAN_POINT('',(-6.575,-3.1287,-0.853755282879)); +#107894 = LINE('',#107895,#107896); +#107895 = CARTESIAN_POINT('',(-6.575,-3.1287,-0.853755282879)); +#107896 = VECTOR('',#107897,1.); +#107897 = DIRECTION('',(0.,0.310280337958,-0.95064510301)); +#107898 = ORIENTED_EDGE('',*,*,#107899,.F.); +#107899 = EDGE_CURVE('',#107900,#107892,#107902,.T.); +#107900 = VERTEX_POINT('',#107901); +#107901 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-0.743116998196)); +#107902 = LINE('',#107903,#107904); +#107903 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-0.743116998196)); +#107904 = VECTOR('',#107905,1.); +#107905 = DIRECTION('',(0.,0.43971315756,-0.898138262779)); +#107906 = ORIENTED_EDGE('',*,*,#107907,.F.); +#107907 = EDGE_CURVE('',#107908,#107900,#107910,.T.); +#107908 = VERTEX_POINT('',#107909); +#107909 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-0.660138284683)); +#107910 = LINE('',#107911,#107912); +#107911 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-0.660138284683)); +#107912 = VECTOR('',#107913,1.); +#107913 = DIRECTION('',(0.,0.699624835187,-0.714510384802)); +#107914 = ORIENTED_EDGE('',*,*,#107915,.F.); +#107915 = EDGE_CURVE('',#107916,#107908,#107918,.T.); +#107916 = VERTEX_POINT('',#107917); +#107917 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-0.577159571171)); +#107918 = LINE('',#107919,#107920); +#107919 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-0.577159571171)); +#107920 = VECTOR('',#107921,1.); +#107921 = DIRECTION('',(0.,0.852653600191,-0.52247663879)); +#107922 = ORIENTED_EDGE('',*,*,#107923,.F.); +#107923 = EDGE_CURVE('',#107924,#107916,#107926,.T.); +#107924 = VERTEX_POINT('',#107925); +#107925 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.5495)); +#107926 = LINE('',#107927,#107928); +#107927 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.5495)); +#107928 = VECTOR('',#107929,1.); +#107929 = DIRECTION('',(0.,0.985821173093,-0.167799328608)); +#107930 = ORIENTED_EDGE('',*,*,#107931,.F.); +#107931 = EDGE_CURVE('',#107932,#107924,#107934,.T.); +#107932 = VERTEX_POINT('',#107933); +#107933 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-0.577159571171)); +#107934 = LINE('',#107935,#107936); +#107935 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-0.577159571171)); +#107936 = VECTOR('',#107937,1.); +#107937 = DIRECTION('',(0.,0.985821173093,0.167799328608)); +#107938 = ORIENTED_EDGE('',*,*,#107939,.F.); +#107939 = EDGE_CURVE('',#107940,#107932,#107942,.T.); +#107940 = VERTEX_POINT('',#107941); +#107941 = CARTESIAN_POINT('',(-6.575,-3.85995,-0.660138284683)); +#107942 = LINE('',#107943,#107944); +#107943 = CARTESIAN_POINT('',(-6.575,-3.85995,-0.660138284683)); +#107944 = VECTOR('',#107945,1.); +#107945 = DIRECTION('',(0.,0.85265333382,0.522477073493)); +#107946 = ORIENTED_EDGE('',*,*,#107947,.F.); +#107947 = EDGE_CURVE('',#107948,#107940,#107950,.T.); +#107948 = VERTEX_POINT('',#107949); +#107949 = CARTESIAN_POINT('',(-6.575,-3.9412,-0.743116998196)); +#107950 = LINE('',#107951,#107952); +#107951 = CARTESIAN_POINT('',(-6.575,-3.9412,-0.743116998196)); +#107952 = VECTOR('',#107953,1.); +#107953 = DIRECTION('',(0.,0.699624835187,0.714510384802)); +#107954 = ORIENTED_EDGE('',*,*,#107955,.F.); +#107955 = EDGE_CURVE('',#107956,#107948,#107958,.T.); +#107956 = VERTEX_POINT('',#107957); +#107957 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-0.853755282879)); +#107958 = LINE('',#107959,#107960); +#107959 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-0.853755282879)); +#107960 = VECTOR('',#107961,1.); +#107961 = DIRECTION('',(0.,0.439714172353,0.898137765954)); +#107962 = ORIENTED_EDGE('',*,*,#107963,.F.); +#107963 = EDGE_CURVE('',#107964,#107956,#107966,.T.); +#107964 = VERTEX_POINT('',#107965); +#107965 = CARTESIAN_POINT('',(-6.575,-4.02245,-0.936734073877)); +#107966 = LINE('',#107967,#107968); +#107967 = CARTESIAN_POINT('',(-6.575,-4.02245,-0.936734073877)); +#107968 = VECTOR('',#107969,1.); +#107969 = DIRECTION('',(0.,0.31027873345,0.950645626703)); +#107970 = ORIENTED_EDGE('',*,*,#107971,.F.); +#107971 = EDGE_CURVE('',#107972,#107964,#107974,.T.); +#107972 = VERTEX_POINT('',#107973); +#107973 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.075031929731)); +#107974 = LINE('',#107975,#107976); +#107975 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.075031929731)); +#107976 = VECTOR('',#107977,1.); +#107977 = DIRECTION('',(0.,0.192182147373,0.98135927276)); +#107978 = ORIENTED_EDGE('',*,*,#107979,.F.); +#107979 = EDGE_CURVE('',#107980,#107972,#107982,.T.); +#107980 = VERTEX_POINT('',#107981); +#107981 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.323968070269)); +#107982 = LINE('',#107983,#107984); +#107983 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.323968070269)); +#107984 = VECTOR('',#107985,1.); +#107985 = DIRECTION('',(0.,0.,1.)); +#107986 = ORIENTED_EDGE('',*,*,#107987,.F.); +#107987 = EDGE_CURVE('',#107988,#107980,#107990,.T.); +#107988 = VERTEX_POINT('',#107989); +#107989 = CARTESIAN_POINT('',(-6.575,-4.02245,-1.462265964866)); +#107990 = LINE('',#107991,#107992); +#107991 = CARTESIAN_POINT('',(-6.575,-4.02245,-1.462265964866)); +#107992 = VECTOR('',#107993,1.); +#107993 = DIRECTION('',(0.,-0.192182095523,0.981359282913)); +#107994 = ORIENTED_EDGE('',*,*,#107995,.F.); +#107995 = EDGE_CURVE('',#107996,#107988,#107998,.T.); +#107996 = VERTEX_POINT('',#107997); +#107997 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-1.545244678378)); +#107998 = LINE('',#107999,#108000); +#107999 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-1.545244678378)); +#108000 = VECTOR('',#108001,1.); +#108001 = DIRECTION('',(0.,-0.310278995296,0.950645541239)); +#108002 = ORIENTED_EDGE('',*,*,#108003,.F.); +#108003 = EDGE_CURVE('',#108004,#107996,#108006,.T.); +#108004 = VERTEX_POINT('',#108005); +#108005 = CARTESIAN_POINT('',(-6.575,-3.9412,-1.655882982433)); +#108006 = LINE('',#108007,#108008); +#108007 = CARTESIAN_POINT('',(-6.575,-3.9412,-1.655882982433)); +#108008 = VECTOR('',#108009,1.); +#108009 = DIRECTION('',(0.,-0.439714110249,0.898137796358)); +#108010 = ORIENTED_EDGE('',*,*,#108011,.F.); +#108011 = EDGE_CURVE('',#108012,#108004,#108014,.T.); +#108012 = VERTEX_POINT('',#108013); +#108013 = CARTESIAN_POINT('',(-6.575,-3.85995,-1.738861705631)); +#108014 = LINE('',#108015,#108016); +#108015 = CARTESIAN_POINT('',(-6.575,-3.85995,-1.738861705631)); +#108016 = VECTOR('',#108017,1.); +#108017 = DIRECTION('',(0.,-0.699624793495,0.714510425625)); +#108018 = ORIENTED_EDGE('',*,*,#108019,.F.); +#108019 = EDGE_CURVE('',#108020,#108012,#108022,.T.); +#108020 = VERTEX_POINT('',#108021); +#108021 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-1.821840426408)); +#108022 = LINE('',#108023,#108024); +#108023 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-1.821840426408)); +#108024 = VECTOR('',#108025,1.); +#108025 = DIRECTION('',(0.,-0.852653313443,0.522477106747)); +#108026 = ORIENTED_EDGE('',*,*,#108027,.F.); +#108027 = EDGE_CURVE('',#108028,#108020,#108030,.T.); +#108028 = VERTEX_POINT('',#108029); +#108029 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.8495)); +#108030 = LINE('',#108031,#108032); +#108031 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.8495)); +#108032 = VECTOR('',#108033,1.); +#108033 = DIRECTION('',(0.,-0.985821170663,0.167799342885)); +#108034 = ORIENTED_EDGE('',*,*,#108035,.F.); +#108035 = EDGE_CURVE('',#108036,#108028,#108038,.T.); +#108036 = VERTEX_POINT('',#108037); +#108037 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-1.821840426408)); +#108038 = LINE('',#108039,#108040); +#108039 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-1.821840426408)); +#108040 = VECTOR('',#108041,1.); +#108041 = DIRECTION('',(0.,-0.985821170663,-0.167799342885)); +#108042 = ORIENTED_EDGE('',*,*,#108043,.F.); +#108043 = EDGE_CURVE('',#108044,#108036,#108046,.T.); +#108044 = VERTEX_POINT('',#108045); +#108045 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-1.738861705631)); +#108046 = LINE('',#108047,#108048); +#108047 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-1.738861705631)); +#108048 = VECTOR('',#108049,1.); +#108049 = DIRECTION('',(0.,-0.852653579815,-0.522476672043)); +#108050 = ORIENTED_EDGE('',*,*,#108051,.F.); +#108051 = EDGE_CURVE('',#108052,#108044,#108054,.T.); +#108052 = VERTEX_POINT('',#108053); +#108053 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-1.655882982433)); +#108054 = LINE('',#108055,#108056); +#108055 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-1.655882982433)); +#108056 = VECTOR('',#108057,1.); +#108057 = DIRECTION('',(0.,-0.699624793495,-0.714510425625)); +#108058 = ORIENTED_EDGE('',*,*,#108059,.F.); +#108059 = EDGE_CURVE('',#108060,#108052,#108062,.T.); +#108060 = VERTEX_POINT('',#108061); +#108061 = CARTESIAN_POINT('',(-6.575,-3.1287,-1.545244678378)); +#108062 = LINE('',#108063,#108064); +#108063 = CARTESIAN_POINT('',(-6.575,-3.1287,-1.545244678378)); +#108064 = VECTOR('',#108065,1.); +#108065 = DIRECTION('',(0.,-0.439713095457,-0.898138293184)); +#108066 = ORIENTED_EDGE('',*,*,#108067,.F.); +#108067 = EDGE_CURVE('',#108068,#108060,#108070,.T.); +#108068 = VERTEX_POINT('',#108069); +#108069 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-1.462265964866)); +#108070 = LINE('',#108071,#108072); +#108071 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-1.462265964866)); +#108072 = VECTOR('',#108073,1.); +#108073 = DIRECTION('',(0.,-0.310280599805,-0.950645017546)); +#108074 = ORIENTED_EDGE('',*,*,#108075,.F.); +#108075 = EDGE_CURVE('',#108076,#108068,#108078,.T.); +#108076 = VERTEX_POINT('',#108077); +#108077 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.323968070269)); +#108078 = LINE('',#108079,#108080); +#108079 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.323968070269)); +#108080 = VECTOR('',#108081,1.); +#108081 = DIRECTION('',(0.,-0.192182095523,-0.981359282913)); +#108082 = ORIENTED_EDGE('',*,*,#108083,.F.); +#108083 = EDGE_CURVE('',#107884,#108076,#108084,.T.); +#108084 = LINE('',#108085,#108086); +#108085 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.075031929731)); +#108086 = VECTOR('',#108087,1.); +#108087 = DIRECTION('',(0.,0.,-1.)); +#108088 = FACE_BOUND('',#108089,.T.); +#108089 = EDGE_LOOP('',(#108090,#108100,#108108,#108116,#108124,#108132, + #108140,#108148,#108156,#108164,#108172,#108180,#108188,#108196, + #108204,#108212,#108220,#108228,#108236,#108244,#108252,#108260, + #108268,#108276,#108284,#108292,#108300,#108308,#108316,#108324, + #108332,#108340,#108348,#108356,#108364,#108372,#108380,#108388, + #108396,#108404,#108412,#108420,#108428,#108436,#108444,#108452, + #108460,#108468,#108476,#108484,#108492,#108500,#108508,#108516, + #108524,#108532,#108540)); +#108090 = ORIENTED_EDGE('',*,*,#108091,.F.); +#108091 = EDGE_CURVE('',#108092,#108094,#108096,.T.); +#108092 = VERTEX_POINT('',#108093); +#108093 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.766521276802)); +#108094 = VERTEX_POINT('',#108095); +#108095 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.711202124774)); +#108096 = LINE('',#108097,#108098); +#108097 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.766521276802)); +#108098 = VECTOR('',#108099,1.); +#108099 = DIRECTION('',(0.,-0.826599232959,0.56279099857)); +#108100 = ORIENTED_EDGE('',*,*,#108101,.F.); +#108101 = EDGE_CURVE('',#108102,#108092,#108104,.T.); +#108102 = VERTEX_POINT('',#108103); +#108103 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.821840426408)); +#108104 = LINE('',#108105,#108106); +#108105 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.821840426408)); +#108106 = VECTOR('',#108107,1.); +#108107 = DIRECTION('',(0.,-0.890605087014,0.454777504925)); +#108108 = ORIENTED_EDGE('',*,*,#108109,.F.); +#108109 = EDGE_CURVE('',#108110,#108102,#108112,.T.); +#108110 = VERTEX_POINT('',#108111); +#108111 = CARTESIAN_POINT('',(-6.575,-4.862033230019,-1.8495)); +#108112 = LINE('',#108113,#108114); +#108113 = CARTESIAN_POINT('',(-6.575,-4.862033230019,-1.8495)); +#108114 = VECTOR('',#108115,1.); +#108115 = DIRECTION('',(0.,-0.9689178256,0.247382794943)); +#108116 = ORIENTED_EDGE('',*,*,#108117,.F.); +#108117 = EDGE_CURVE('',#108118,#108110,#108120,.T.); +#108118 = VERTEX_POINT('',#108119); +#108119 = CARTESIAN_POINT('',(-6.575,-4.645366769981,-1.8495)); +#108120 = LINE('',#108121,#108122); +#108121 = CARTESIAN_POINT('',(-6.575,-4.645366769981,-1.8495)); +#108122 = VECTOR('',#108123,1.); +#108123 = DIRECTION('',(0.,-1.,0.)); +#108124 = ORIENTED_EDGE('',*,*,#108125,.F.); +#108125 = EDGE_CURVE('',#108126,#108118,#108128,.T.); +#108126 = VERTEX_POINT('',#108127); +#108127 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.821840426408)); +#108128 = LINE('',#108129,#108130); +#108129 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.821840426408)); +#108130 = VECTOR('',#108131,1.); +#108131 = DIRECTION('',(0.,-0.9689178256,-0.247382794943)); +#108132 = ORIENTED_EDGE('',*,*,#108133,.F.); +#108133 = EDGE_CURVE('',#108134,#108126,#108136,.T.); +#108134 = VERTEX_POINT('',#108135); +#108135 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.766521276802)); +#108136 = LINE('',#108137,#108138); +#108137 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.766521276802)); +#108138 = VECTOR('',#108139,1.); +#108139 = DIRECTION('',(0.,-0.890605087014,-0.454777504925)); +#108140 = ORIENTED_EDGE('',*,*,#108141,.F.); +#108141 = EDGE_CURVE('',#108142,#108134,#108144,.T.); +#108142 = VERTEX_POINT('',#108143); +#108143 = CARTESIAN_POINT('',(-6.575,-4.34745,-1.711202124774)); +#108144 = LINE('',#108145,#108146); +#108145 = CARTESIAN_POINT('',(-6.575,-4.34745,-1.711202124774)); +#108146 = VECTOR('',#108147,1.); +#108147 = DIRECTION('',(0.,-0.826599232959,-0.56279099857)); +#108148 = ORIENTED_EDGE('',*,*,#108149,.F.); +#108149 = EDGE_CURVE('',#108150,#108142,#108152,.T.); +#108150 = VERTEX_POINT('',#108151); +#108151 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-1.628223411262)); +#108152 = LINE('',#108153,#108154); +#108153 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-1.628223411262)); +#108154 = VECTOR('',#108155,1.); +#108155 = DIRECTION('',(0.,-0.546623277701,-0.837378643312)); +#108156 = ORIENTED_EDGE('',*,*,#108157,.F.); +#108157 = EDGE_CURVE('',#108158,#108150,#108160,.T.); +#108158 = VERTEX_POINT('',#108159); +#108159 = CARTESIAN_POINT('',(-6.575,-4.2662,-1.545244678378)); +#108160 = LINE('',#108161,#108162); +#108161 = CARTESIAN_POINT('',(-6.575,-4.2662,-1.545244678378)); +#108162 = VECTOR('',#108163,1.); +#108163 = DIRECTION('',(0.,-0.310278929834,-0.950645562605)); +#108164 = ORIENTED_EDGE('',*,*,#108165,.F.); +#108165 = EDGE_CURVE('',#108166,#108158,#108168,.T.); +#108166 = VERTEX_POINT('',#108167); +#108167 = CARTESIAN_POINT('',(-6.575,-4.401616769981,-1.545244678378)); +#108168 = LINE('',#108169,#108170); +#108169 = CARTESIAN_POINT('',(-6.575,-4.401616769981,-1.545244678378)); +#108170 = VECTOR('',#108171,1.); +#108171 = DIRECTION('',(0.,1.,0.)); +#108172 = ORIENTED_EDGE('',*,*,#108173,.F.); +#108173 = EDGE_CURVE('',#108174,#108166,#108176,.T.); +#108174 = VERTEX_POINT('',#108175); +#108175 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.60056382072)); +#108176 = LINE('',#108177,#108178); +#108177 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.60056382072)); +#108178 = VECTOR('',#108179,1.); +#108179 = DIRECTION('',(0.,0.439712142766,0.898138759605)); +#108180 = ORIENTED_EDGE('',*,*,#108181,.F.); +#108181 = EDGE_CURVE('',#108182,#108174,#108184,.T.); +#108182 = VERTEX_POINT('',#108183); +#108183 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-1.655882982433)); +#108184 = LINE('',#108185,#108186); +#108185 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-1.655882982433)); +#108186 = VECTOR('',#108187,1.); +#108187 = DIRECTION('',(0.,0.69962539137,0.714509840205)); +#108188 = ORIENTED_EDGE('',*,*,#108189,.F.); +#108189 = EDGE_CURVE('',#108190,#108182,#108192,.T.); +#108190 = VERTEX_POINT('',#108191); +#108191 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.683542553604)); +#108192 = LINE('',#108193,#108194); +#108193 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.683542553604)); +#108194 = VECTOR('',#108195,1.); +#108195 = DIRECTION('',(0.,0.890604584207,0.454778489585)); +#108196 = ORIENTED_EDGE('',*,*,#108197,.F.); +#108197 = EDGE_CURVE('',#108198,#108190,#108200,.T.); +#108198 = VERTEX_POINT('',#108199); +#108199 = CARTESIAN_POINT('',(-6.575,-4.67245,-1.711202124774)); +#108200 = LINE('',#108201,#108202); +#108201 = CARTESIAN_POINT('',(-6.575,-4.67245,-1.711202124774)); +#108202 = VECTOR('',#108203,1.); +#108203 = DIRECTION('',(0.,0.979770739215,0.200123208493)); +#108204 = ORIENTED_EDGE('',*,*,#108205,.F.); +#108205 = EDGE_CURVE('',#108206,#108198,#108208,.T.); +#108206 = VERTEX_POINT('',#108207); +#108207 = CARTESIAN_POINT('',(-6.575,-4.83495,-1.711202124774)); +#108208 = LINE('',#108209,#108210); +#108209 = CARTESIAN_POINT('',(-6.575,-4.83495,-1.711202124774)); +#108210 = VECTOR('',#108211,1.); +#108211 = DIRECTION('',(0.,1.,0.)); +#108212 = ORIENTED_EDGE('',*,*,#108213,.F.); +#108213 = EDGE_CURVE('',#108214,#108206,#108216,.T.); +#108214 = VERTEX_POINT('',#108215); +#108215 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.683542553604)); +#108216 = LINE('',#108217,#108218); +#108217 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.683542553604)); +#108218 = VECTOR('',#108219,1.); +#108219 = DIRECTION('',(0.,0.979770739215,-0.200123208493)); +#108220 = ORIENTED_EDGE('',*,*,#108221,.F.); +#108221 = EDGE_CURVE('',#108222,#108214,#108224,.T.); +#108222 = VERTEX_POINT('',#108223); +#108223 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.655882982433)); +#108224 = LINE('',#108225,#108226); +#108225 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.655882982433)); +#108226 = VECTOR('',#108227,1.); +#108227 = DIRECTION('',(0.,0.890604584207,-0.454778489585)); +#108228 = ORIENTED_EDGE('',*,*,#108229,.F.); +#108229 = EDGE_CURVE('',#108230,#108222,#108232,.T.); +#108230 = VERTEX_POINT('',#108231); +#108231 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.60056382072)); +#108232 = LINE('',#108233,#108234); +#108233 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.60056382072)); +#108234 = VECTOR('',#108235,1.); +#108235 = DIRECTION('',(0.,0.69962539137,-0.714509840205)); +#108236 = ORIENTED_EDGE('',*,*,#108237,.F.); +#108237 = EDGE_CURVE('',#108238,#108230,#108240,.T.); +#108238 = VERTEX_POINT('',#108239); +#108239 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.545244678378)); +#108240 = LINE('',#108241,#108242); +#108241 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.545244678378)); +#108242 = VECTOR('',#108243,1.); +#108243 = DIRECTION('',(0.,0.439712142766,-0.898138759605)); +#108244 = ORIENTED_EDGE('',*,*,#108245,.F.); +#108245 = EDGE_CURVE('',#108246,#108238,#108248,.T.); +#108246 = VERTEX_POINT('',#108247); +#108247 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.434606393695)); +#108248 = LINE('',#108249,#108250); +#108249 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.434606393695)); +#108250 = VECTOR('',#108251,1.); +#108251 = DIRECTION('',(0.,0.,-1.)); +#108252 = ORIENTED_EDGE('',*,*,#108253,.F.); +#108253 = EDGE_CURVE('',#108254,#108246,#108256,.T.); +#108254 = VERTEX_POINT('',#108255); +#108255 = CARTESIAN_POINT('',(-6.575,-5.051616769981,-1.323968070269)); +#108256 = LINE('',#108257,#108258); +#108257 = CARTESIAN_POINT('',(-6.575,-5.051616769981,-1.323968070269)); +#108258 = VECTOR('',#108259,1.); +#108259 = DIRECTION('',(0.,-0.43971201856,-0.898138820414)); +#108260 = ORIENTED_EDGE('',*,*,#108261,.F.); +#108261 = EDGE_CURVE('',#108262,#108254,#108264,.T.); +#108262 = VERTEX_POINT('',#108263); +#108263 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.268648927927)); +#108264 = LINE('',#108265,#108266); +#108265 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.268648927927)); +#108266 = VECTOR('',#108267,1.); +#108267 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#108268 = ORIENTED_EDGE('',*,*,#108269,.F.); +#108269 = EDGE_CURVE('',#108270,#108262,#108272,.T.); +#108270 = VERTEX_POINT('',#108271); +#108271 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.240989356756)); +#108272 = LINE('',#108273,#108274); +#108273 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.240989356756)); +#108274 = VECTOR('',#108275,1.); +#108275 = DIRECTION('',(0.,-0.985821173093,-0.167799328608)); +#108276 = ORIENTED_EDGE('',*,*,#108277,.F.); +#108277 = EDGE_CURVE('',#108278,#108270,#108280,.T.); +#108278 = VERTEX_POINT('',#108279); +#108279 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.240989356756)); +#108280 = LINE('',#108281,#108282); +#108281 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.240989356756)); +#108282 = VECTOR('',#108283,1.); +#108283 = DIRECTION('',(0.,-1.,0.)); +#108284 = ORIENTED_EDGE('',*,*,#108285,.F.); +#108285 = EDGE_CURVE('',#108286,#108278,#108288,.T.); +#108286 = VERTEX_POINT('',#108287); +#108287 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.130351072073)); +#108288 = LINE('',#108289,#108290); +#108289 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.130351072073)); +#108290 = VECTOR('',#108291,1.); +#108291 = DIRECTION('',(0.,0.,-1.)); +#108292 = ORIENTED_EDGE('',*,*,#108293,.F.); +#108293 = EDGE_CURVE('',#108294,#108286,#108296,.T.); +#108294 = VERTEX_POINT('',#108295); +#108295 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.130351072073)); +#108296 = LINE('',#108297,#108298); +#108297 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.130351072073)); +#108298 = VECTOR('',#108299,1.); +#108299 = DIRECTION('',(0.,1.,0.)); +#108300 = ORIENTED_EDGE('',*,*,#108301,.F.); +#108301 = EDGE_CURVE('',#108302,#108294,#108304,.T.); +#108302 = VERTEX_POINT('',#108303); +#108303 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.075031929731)); +#108304 = LINE('',#108305,#108306); +#108305 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.075031929731)); +#108306 = VECTOR('',#108307,1.); +#108307 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#108308 = ORIENTED_EDGE('',*,*,#108309,.F.); +#108309 = EDGE_CURVE('',#108310,#108302,#108312,.T.); +#108310 = VERTEX_POINT('',#108311); +#108311 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.01971278739)); +#108312 = LINE('',#108313,#108314); +#108313 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.01971278739)); +#108314 = VECTOR('',#108315,1.); +#108315 = DIRECTION('',(0.,0.699623472665,-0.714511718936)); +#108316 = ORIENTED_EDGE('',*,*,#108317,.F.); +#108317 = EDGE_CURVE('',#108318,#108310,#108320,.T.); +#108318 = VERTEX_POINT('',#108319); +#108319 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.909074502706)); +#108320 = LINE('',#108321,#108322); +#108321 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.909074502706)); +#108322 = VECTOR('',#108323,1.); +#108323 = DIRECTION('',(0.,0.439714172353,-0.898137765954)); +#108324 = ORIENTED_EDGE('',*,*,#108325,.F.); +#108325 = EDGE_CURVE('',#108326,#108318,#108328,.T.); +#108326 = VERTEX_POINT('',#108327); +#108327 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.853755282879)); +#108328 = LINE('',#108329,#108330); +#108329 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.853755282879)); +#108330 = VECTOR('',#108331,1.); +#108331 = DIRECTION('',(0.,0.,-1.)); +#108332 = ORIENTED_EDGE('',*,*,#108333,.F.); +#108333 = EDGE_CURVE('',#108334,#108326,#108336,.T.); +#108334 = VERTEX_POINT('',#108335); +#108335 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-0.770776569367)); +#108336 = LINE('',#108337,#108338); +#108337 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-0.770776569367)); +#108338 = VECTOR('',#108339,1.); +#108339 = DIRECTION('',(0.,-0.546623277701,-0.837378643312)); +#108340 = ORIENTED_EDGE('',*,*,#108341,.F.); +#108341 = EDGE_CURVE('',#108342,#108334,#108344,.T.); +#108342 = VERTEX_POINT('',#108343); +#108343 = CARTESIAN_POINT('',(-6.575,-4.943283230019,-0.715457427025)); +#108344 = LINE('',#108345,#108346); +#108345 = CARTESIAN_POINT('',(-6.575,-4.943283230019,-0.715457427025)); +#108346 = VECTOR('',#108347,1.); +#108347 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#108348 = ORIENTED_EDGE('',*,*,#108349,.F.); +#108349 = EDGE_CURVE('',#108350,#108342,#108352,.T.); +#108350 = VERTEX_POINT('',#108351); +#108351 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-0.687797855854)); +#108352 = LINE('',#108353,#108354); +#108353 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-0.687797855854)); +#108354 = VECTOR('',#108355,1.); +#108355 = DIRECTION('',(0.,-0.979770649404,-0.200123648195)); +#108356 = ORIENTED_EDGE('',*,*,#108357,.F.); +#108357 = EDGE_CURVE('',#108358,#108350,#108360,.T.); +#108358 = VERTEX_POINT('',#108359); +#108359 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-0.687797855854)); +#108360 = LINE('',#108361,#108362); +#108361 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-0.687797855854)); +#108362 = VECTOR('',#108363,1.); +#108363 = DIRECTION('',(0.,-1.,0.)); +#108364 = ORIENTED_EDGE('',*,*,#108365,.F.); +#108365 = EDGE_CURVE('',#108366,#108358,#108368,.T.); +#108366 = VERTEX_POINT('',#108367); +#108367 = CARTESIAN_POINT('',(-6.575,-4.564116769981,-0.715457427025)); +#108368 = LINE('',#108369,#108370); +#108369 = CARTESIAN_POINT('',(-6.575,-4.564116769981,-0.715457427025)); +#108370 = VECTOR('',#108371,1.); +#108371 = DIRECTION('',(0.,-0.979770649404,0.200123648195)); +#108372 = ORIENTED_EDGE('',*,*,#108373,.F.); +#108373 = EDGE_CURVE('',#108374,#108366,#108376,.T.); +#108374 = VERTEX_POINT('',#108375); +#108375 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-0.770776569367)); +#108376 = LINE('',#108377,#108378); +#108377 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-0.770776569367)); +#108378 = VECTOR('',#108379,1.); +#108379 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#108380 = ORIENTED_EDGE('',*,*,#108381,.F.); +#108381 = EDGE_CURVE('',#108382,#108374,#108384,.T.); +#108382 = VERTEX_POINT('',#108383); +#108383 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.853755282879)); +#108384 = LINE('',#108385,#108386); +#108385 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.853755282879)); +#108386 = VECTOR('',#108387,1.); +#108387 = DIRECTION('',(0.,-0.546623277701,0.837378643312)); +#108388 = ORIENTED_EDGE('',*,*,#108389,.F.); +#108389 = EDGE_CURVE('',#108390,#108382,#108392,.T.); +#108390 = VERTEX_POINT('',#108391); +#108391 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-0.853755282879)); +#108392 = LINE('',#108393,#108394); +#108393 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-0.853755282879)); +#108394 = VECTOR('',#108395,1.); +#108395 = DIRECTION('',(0.,-1.,0.)); +#108396 = ORIENTED_EDGE('',*,*,#108397,.F.); +#108397 = EDGE_CURVE('',#108398,#108390,#108400,.T.); +#108398 = VERTEX_POINT('',#108399); +#108399 = CARTESIAN_POINT('',(-6.575,-4.320366769981,-0.743116998196)); +#108400 = LINE('',#108401,#108402); +#108401 = CARTESIAN_POINT('',(-6.575,-4.320366769981,-0.743116998196)); +#108402 = VECTOR('',#108403,1.); +#108403 = DIRECTION('',(0.,0.23777306396,-0.971320734904)); +#108404 = ORIENTED_EDGE('',*,*,#108405,.F.); +#108405 = EDGE_CURVE('',#108406,#108398,#108408,.T.); +#108406 = VERTEX_POINT('',#108407); +#108407 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.632478713512)); +#108408 = LINE('',#108409,#108410); +#108409 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.632478713512)); +#108410 = VECTOR('',#108411,1.); +#108411 = DIRECTION('',(0.,0.699624494557,-0.714510718335)); +#108412 = ORIENTED_EDGE('',*,*,#108413,.F.); +#108413 = EDGE_CURVE('',#108414,#108406,#108416,.T.); +#108414 = VERTEX_POINT('',#108415); +#108415 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-0.577159571171)); +#108416 = LINE('',#108417,#108418); +#108417 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-0.577159571171)); +#108418 = VECTOR('',#108419,1.); +#108419 = DIRECTION('',(0.,0.890605111202,-0.454777457556)); +#108420 = ORIENTED_EDGE('',*,*,#108421,.F.); +#108421 = EDGE_CURVE('',#108422,#108414,#108424,.T.); +#108422 = VERTEX_POINT('',#108423); +#108423 = CARTESIAN_POINT('',(-6.575,-4.726616769981,-0.5495)); +#108424 = LINE('',#108425,#108426); +#108425 = CARTESIAN_POINT('',(-6.575,-4.726616769981,-0.5495)); +#108426 = VECTOR('',#108427,1.); +#108427 = DIRECTION('',(0.,0.989524056498,-0.144368076845)); +#108428 = ORIENTED_EDGE('',*,*,#108429,.F.); +#108429 = EDGE_CURVE('',#108430,#108422,#108432,.T.); +#108430 = VERTEX_POINT('',#108431); +#108431 = CARTESIAN_POINT('',(-6.575,-4.780783230019,-0.5495)); +#108432 = LINE('',#108433,#108434); +#108433 = CARTESIAN_POINT('',(-6.575,-4.780783230019,-0.5495)); +#108434 = VECTOR('',#108435,1.); +#108435 = DIRECTION('',(0.,1.,0.)); +#108436 = ORIENTED_EDGE('',*,*,#108437,.F.); +#108437 = EDGE_CURVE('',#108438,#108430,#108440,.T.); +#108438 = VERTEX_POINT('',#108439); +#108439 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-0.577159571171)); +#108440 = LINE('',#108441,#108442); +#108441 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-0.577159571171)); +#108442 = VECTOR('',#108443,1.); +#108443 = DIRECTION('',(0.,0.989524056498,0.144368076845)); +#108444 = ORIENTED_EDGE('',*,*,#108445,.F.); +#108445 = EDGE_CURVE('',#108446,#108438,#108448,.T.); +#108446 = VERTEX_POINT('',#108447); +#108447 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.632478713512)); +#108448 = LINE('',#108449,#108450); +#108449 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.632478713512)); +#108450 = VECTOR('',#108451,1.); +#108451 = DIRECTION('',(0.,0.890605111202,0.454777457556)); +#108452 = ORIENTED_EDGE('',*,*,#108453,.F.); +#108453 = EDGE_CURVE('',#108454,#108446,#108456,.T.); +#108454 = VERTEX_POINT('',#108455); +#108455 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-0.743116998196)); +#108456 = LINE('',#108457,#108458); +#108457 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-0.743116998196)); +#108458 = VECTOR('',#108459,1.); +#108459 = DIRECTION('',(0.,0.699624494557,0.714510718335)); +#108460 = ORIENTED_EDGE('',*,*,#108461,.F.); +#108461 = EDGE_CURVE('',#108462,#108454,#108464,.T.); +#108462 = VERTEX_POINT('',#108463); +#108463 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.853755282879)); +#108464 = LINE('',#108465,#108466); +#108465 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.853755282879)); +#108466 = VECTOR('',#108467,1.); +#108467 = DIRECTION('',(0.,0.23777306396,0.971320734904)); +#108468 = ORIENTED_EDGE('',*,*,#108469,.F.); +#108469 = EDGE_CURVE('',#108470,#108462,#108472,.T.); +#108470 = VERTEX_POINT('',#108471); +#108471 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.909074502706)); +#108472 = LINE('',#108473,#108474); +#108473 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.909074502706)); +#108474 = VECTOR('',#108475,1.); +#108475 = DIRECTION('',(0.,1.605551239636E-14,1.)); +#108476 = ORIENTED_EDGE('',*,*,#108477,.F.); +#108477 = EDGE_CURVE('',#108478,#108470,#108480,.T.); +#108478 = VERTEX_POINT('',#108479); +#108479 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-1.01971278739)); +#108480 = LINE('',#108481,#108482); +#108481 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-1.01971278739)); +#108482 = VECTOR('',#108483,1.); +#108483 = DIRECTION('',(0.,-0.23777306396,0.971320734904)); +#108484 = ORIENTED_EDGE('',*,*,#108485,.F.); +#108485 = EDGE_CURVE('',#108486,#108478,#108488,.T.); +#108486 = VERTEX_POINT('',#108487); +#108487 = CARTESIAN_POINT('',(-6.575,-5.132866769981,-1.102691500902)); +#108488 = LINE('',#108489,#108490); +#108489 = CARTESIAN_POINT('',(-6.575,-5.132866769981,-1.102691500902)); +#108490 = VECTOR('',#108491,1.); +#108491 = DIRECTION('',(0.,-0.546621084475,0.837380075)); +#108492 = ORIENTED_EDGE('',*,*,#108493,.F.); +#108493 = EDGE_CURVE('',#108494,#108486,#108496,.T.); +#108494 = VERTEX_POINT('',#108495); +#108495 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.185670214415)); +#108496 = LINE('',#108497,#108498); +#108497 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.185670214415)); +#108498 = VECTOR('',#108499,1.); +#108499 = DIRECTION('',(0.,-0.793878740881,0.608076101139)); +#108500 = ORIENTED_EDGE('',*,*,#108501,.F.); +#108501 = EDGE_CURVE('',#108502,#108494,#108504,.T.); +#108502 = VERTEX_POINT('',#108503); +#108503 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.240989356756)); +#108504 = LINE('',#108505,#108506); +#108505 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.240989356756)); +#108506 = VECTOR('',#108507,1.); +#108507 = DIRECTION('',(0.,0.925735208255,0.378172347215)); +#108508 = ORIENTED_EDGE('',*,*,#108509,.F.); +#108509 = EDGE_CURVE('',#108510,#108502,#108512,.T.); +#108510 = VERTEX_POINT('',#108511); +#108511 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.323968070269)); +#108512 = LINE('',#108513,#108514); +#108513 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.323968070269)); +#108514 = VECTOR('',#108515,1.); +#108515 = DIRECTION('',(0.,0.546623277701,0.837378643312)); +#108516 = ORIENTED_EDGE('',*,*,#108517,.F.); +#108517 = EDGE_CURVE('',#108518,#108510,#108520,.T.); +#108518 = VERTEX_POINT('',#108519); +#108519 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.434606393695)); +#108520 = LINE('',#108521,#108522); +#108521 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.434606393695)); +#108522 = VECTOR('',#108523,1.); +#108523 = DIRECTION('',(0.,0.237770418166,0.971321382574)); +#108524 = ORIENTED_EDGE('',*,*,#108525,.F.); +#108525 = EDGE_CURVE('',#108526,#108518,#108528,.T.); +#108526 = VERTEX_POINT('',#108527); +#108527 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.545244678378)); +#108528 = LINE('',#108529,#108530); +#108529 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.545244678378)); +#108530 = VECTOR('',#108531,1.); +#108531 = DIRECTION('',(0.,0.,1.)); +#108532 = ORIENTED_EDGE('',*,*,#108533,.F.); +#108533 = EDGE_CURVE('',#108534,#108526,#108536,.T.); +#108534 = VERTEX_POINT('',#108535); +#108535 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.628223411262)); +#108536 = LINE('',#108537,#108538); +#108537 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.628223411262)); +#108538 = VECTOR('',#108539,1.); +#108539 = DIRECTION('',(0.,-0.310278929834,0.950645562605)); +#108540 = ORIENTED_EDGE('',*,*,#108541,.F.); +#108541 = EDGE_CURVE('',#108094,#108534,#108542,.T.); +#108542 = LINE('',#108543,#108544); +#108543 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.711202124774)); +#108544 = VECTOR('',#108545,1.); +#108545 = DIRECTION('',(0.,-0.546623277701,0.837378643312)); +#108546 = FACE_BOUND('',#108547,.T.); +#108547 = EDGE_LOOP('',(#108548,#108558,#108566,#108574,#108582,#108590, + #108598,#108606,#108614,#108622,#108630,#108638,#108646,#108654, + #108662,#108670,#108678,#108686,#108694,#108702,#108710,#108718, + #108726,#108734,#108742,#108750,#108758,#108766,#108774,#108782, + #108790,#108798,#108806,#108814,#108822,#108830,#108838,#108846)); +#108548 = ORIENTED_EDGE('',*,*,#108549,.F.); +#108549 = EDGE_CURVE('',#108550,#108552,#108554,.T.); +#108550 = VERTEX_POINT('',#108551); +#108551 = CARTESIAN_POINT('',(-6.575,3.318537683111,-1.426570752661)); +#108552 = VERTEX_POINT('',#108553); +#108553 = CARTESIAN_POINT('',(-6.575,3.288647333187,-1.507602375245)); +#108554 = LINE('',#108555,#108556); +#108555 = CARTESIAN_POINT('',(-6.575,3.318537683111,-1.426570752661)); +#108556 = VECTOR('',#108557,1.); +#108557 = DIRECTION('',(0.,-0.346078392209,-0.93820559924)); +#108558 = ORIENTED_EDGE('',*,*,#108559,.F.); +#108559 = EDGE_CURVE('',#108560,#108550,#108562,.T.); +#108560 = VERTEX_POINT('',#108561); +#108561 = CARTESIAN_POINT('',(-6.575,3.33670857148,-1.362777065421)); +#108562 = LINE('',#108563,#108564); +#108563 = CARTESIAN_POINT('',(-6.575,3.33670857148,-1.362777065421)); +#108564 = VECTOR('',#108565,1.); +#108565 = DIRECTION('',(0.,-0.27394218601,-0.961746161273)); +#108566 = ORIENTED_EDGE('',*,*,#108567,.F.); +#108567 = EDGE_CURVE('',#108568,#108560,#108570,.T.); +#108568 = VERTEX_POINT('',#108569); +#108569 = CARTESIAN_POINT('',(-6.575,3.328806560274,-1.318800524007)); +#108570 = LINE('',#108571,#108572); +#108571 = CARTESIAN_POINT('',(-6.575,3.328806560274,-1.318800524007)); +#108572 = VECTOR('',#108573,1.); +#108573 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#108574 = ORIENTED_EDGE('',*,*,#108575,.F.); +#108575 = EDGE_CURVE('',#108576,#108568,#108578,.T.); +#108576 = VERTEX_POINT('',#108577); +#108577 = CARTESIAN_POINT('',(-6.575,3.306551091157,-1.277403111866)); +#108578 = LINE('',#108579,#108580); +#108579 = CARTESIAN_POINT('',(-6.575,3.306551091157,-1.277403111866)); +#108580 = VECTOR('',#108581,1.); +#108581 = DIRECTION('',(0.,0.4735150851,-0.880785708435)); +#108582 = ORIENTED_EDGE('',*,*,#108583,.F.); +#108583 = EDGE_CURVE('',#108584,#108576,#108586,.T.); +#108584 = VERTEX_POINT('',#108585); +#108585 = CARTESIAN_POINT('',(-6.575,3.269942164128,-1.238584828997)); +#108586 = LINE('',#108587,#108588); +#108587 = CARTESIAN_POINT('',(-6.575,3.269942164128,-1.238584828997)); +#108588 = VECTOR('',#108589,1.); +#108589 = DIRECTION('',(0.,0.686100487162,-0.727506784515)); +#108590 = ORIENTED_EDGE('',*,*,#108591,.F.); +#108591 = EDGE_CURVE('',#108592,#108584,#108594,.T.); +#108592 = VERTEX_POINT('',#108593); +#108593 = CARTESIAN_POINT('',(-6.575,3.238601254837,-1.229084238559)); +#108594 = LINE('',#108595,#108596); +#108595 = CARTESIAN_POINT('',(-6.575,3.238601254837,-1.229084238559)); +#108596 = VECTOR('',#108597,1.); +#108597 = DIRECTION('',(0.,0.9569960499,-0.290100948767)); +#108598 = ORIENTED_EDGE('',*,*,#108599,.F.); +#108599 = EDGE_CURVE('',#108600,#108592,#108602,.T.); +#108600 = VERTEX_POINT('',#108601); +#108601 = CARTESIAN_POINT('',(-6.575,3.192906872234,-1.222162780161)); +#108602 = LINE('',#108603,#108604); +#108603 = CARTESIAN_POINT('',(-6.575,3.192906872234,-1.222162780161)); +#108604 = VECTOR('',#108605,1.); +#108605 = DIRECTION('',(0.,0.988721698083,-0.149764494255)); +#108606 = ORIENTED_EDGE('',*,*,#108607,.F.); +#108607 = EDGE_CURVE('',#108608,#108600,#108610,.T.); +#108608 = VERTEX_POINT('',#108609); +#108609 = CARTESIAN_POINT('',(-6.575,3.164199966678,-1.227321036861)); +#108610 = LINE('',#108611,#108612); +#108611 = CARTESIAN_POINT('',(-6.575,3.164199966678,-1.227321036861)); +#108612 = VECTOR('',#108613,1.); +#108613 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#108614 = ORIENTED_EDGE('',*,*,#108615,.F.); +#108615 = EDGE_CURVE('',#108616,#108608,#108618,.T.); +#108616 = VERTEX_POINT('',#108617); +#108617 = CARTESIAN_POINT('',(-6.575,3.123773601812,-1.249717270894)); +#108618 = LINE('',#108619,#108620); +#108619 = CARTESIAN_POINT('',(-6.575,3.123773601812,-1.249717270894)); +#108620 = VECTOR('',#108621,1.); +#108621 = DIRECTION('',(0.,0.874734056587,0.484603270983)); +#108622 = ORIENTED_EDGE('',*,*,#108623,.F.); +#108623 = EDGE_CURVE('',#108624,#108616,#108626,.T.); +#108624 = VERTEX_POINT('',#108625); +#108625 = CARTESIAN_POINT('',(-6.575,3.097700699991,-1.269534374732)); +#108626 = LINE('',#108627,#108628); +#108627 = CARTESIAN_POINT('',(-6.575,3.097700699991,-1.269534374732)); +#108628 = VECTOR('',#108629,1.); +#108629 = DIRECTION('',(0.,0.796137209037,0.605116141238)); +#108630 = ORIENTED_EDGE('',*,*,#108631,.F.); +#108631 = EDGE_CURVE('',#108632,#108624,#108634,.T.); +#108632 = VERTEX_POINT('',#108633); +#108633 = CARTESIAN_POINT('',(-6.575,3.076895785108,-1.318669176535)); +#108634 = LINE('',#108635,#108636); +#108635 = CARTESIAN_POINT('',(-6.575,3.076895785108,-1.318669176535)); +#108636 = VECTOR('',#108637,1.); +#108637 = DIRECTION('',(0.,0.389912020644,0.920852114162)); +#108638 = ORIENTED_EDGE('',*,*,#108639,.F.); +#108639 = EDGE_CURVE('',#108640,#108632,#108642,.T.); +#108640 = VERTEX_POINT('',#108641); +#108641 = CARTESIAN_POINT('',(-6.575,3.070444353802,-1.365224844454)); +#108642 = LINE('',#108643,#108644); +#108643 = CARTESIAN_POINT('',(-6.575,3.070444353802,-1.365224844454)); +#108644 = VECTOR('',#108645,1.); +#108645 = DIRECTION('',(0.,0.137262905725,0.99053465094)); +#108646 = ORIENTED_EDGE('',*,*,#108647,.F.); +#108647 = EDGE_CURVE('',#108648,#108640,#108650,.T.); +#108648 = VERTEX_POINT('',#108649); +#108649 = CARTESIAN_POINT('',(-6.575,3.078346365008,-1.409201385868)); +#108650 = LINE('',#108651,#108652); +#108651 = CARTESIAN_POINT('',(-6.575,3.078346365008,-1.409201385868)); +#108652 = VECTOR('',#108653,1.); +#108653 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#108654 = ORIENTED_EDGE('',*,*,#108655,.F.); +#108655 = EDGE_CURVE('',#108656,#108648,#108658,.T.); +#108656 = VERTEX_POINT('',#108657); +#108657 = CARTESIAN_POINT('',(-6.575,3.117589292885,-1.462678558785)); +#108658 = LINE('',#108659,#108660); +#108659 = CARTESIAN_POINT('',(-6.575,3.117589292885,-1.462678558785)); +#108660 = VECTOR('',#108661,1.); +#108661 = DIRECTION('',(0.,-0.591621807428,0.806215626849)); +#108662 = ORIENTED_EDGE('',*,*,#108663,.F.); +#108663 = EDGE_CURVE('',#108664,#108656,#108666,.T.); +#108664 = VERTEX_POINT('',#108665); +#108665 = CARTESIAN_POINT('',(-6.575,3.219514052499,-1.535156867823)); +#108666 = LINE('',#108667,#108668); +#108667 = CARTESIAN_POINT('',(-6.575,3.219514052499,-1.535156867823)); +#108668 = VECTOR('',#108669,1.); +#108669 = DIRECTION('',(0.,-0.814961064527,0.579515714459)); +#108670 = ORIENTED_EDGE('',*,*,#108671,.F.); +#108671 = EDGE_CURVE('',#108672,#108664,#108674,.T.); +#108672 = VERTEX_POINT('',#108673); +#108673 = CARTESIAN_POINT('',(-6.575,3.106404087797,-1.812727710775)); +#108674 = LINE('',#108675,#108676); +#108675 = CARTESIAN_POINT('',(-6.575,3.106404087797,-1.812727710775)); +#108676 = VECTOR('',#108677,1.); +#108677 = DIRECTION('',(0.,0.377369986318,0.92606257533)); +#108678 = ORIENTED_EDGE('',*,*,#108679,.F.); +#108679 = EDGE_CURVE('',#108680,#108672,#108682,.T.); +#108680 = VERTEX_POINT('',#108681); +#108681 = CARTESIAN_POINT('',(-6.575,3.086782637815,-1.785989143004)); +#108682 = LINE('',#108683,#108684); +#108683 = CARTESIAN_POINT('',(-6.575,3.086782637815,-1.785989143004)); +#108684 = VECTOR('',#108685,1.); +#108685 = DIRECTION('',(0.,0.591621802683,-0.806215630331)); +#108686 = ORIENTED_EDGE('',*,*,#108687,.F.); +#108687 = EDGE_CURVE('',#108688,#108680,#108690,.T.); +#108688 = VERTEX_POINT('',#108689); +#108689 = CARTESIAN_POINT('',(-6.575,3.064527184097,-1.744591728096)); +#108690 = LINE('',#108691,#108692); +#108691 = CARTESIAN_POINT('',(-6.575,3.064527184097,-1.744591728096)); +#108692 = VECTOR('',#108693,1.); +#108693 = DIRECTION('',(0.,0.473514806363,-0.880785858285)); +#108694 = ORIENTED_EDGE('',*,*,#108695,.F.); +#108695 = EDGE_CURVE('',#108696,#108688,#108698,.T.); +#108696 = VERTEX_POINT('',#108697); +#108697 = CARTESIAN_POINT('',(-6.575,3.048723157995,-1.656638624735)); +#108698 = LINE('',#108699,#108700); +#108699 = CARTESIAN_POINT('',(-6.575,3.048723157995,-1.656638624735)); +#108700 = VECTOR('',#108701,1.); +#108701 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#108702 = ORIENTED_EDGE('',*,*,#108703,.F.); +#108703 = EDGE_CURVE('',#108704,#108696,#108706,.T.); +#108704 = VERTEX_POINT('',#108705); +#108705 = CARTESIAN_POINT('',(-6.575,2.991309305817,-1.666955145514)); +#108706 = LINE('',#108707,#108708); +#108707 = CARTESIAN_POINT('',(-6.575,2.991309305817,-1.666955145514)); +#108708 = VECTOR('',#108709,1.); +#108709 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#108710 = ORIENTED_EDGE('',*,*,#108711,.F.); +#108711 = EDGE_CURVE('',#108712,#108704,#108714,.T.); +#108712 = VERTEX_POINT('',#108713); +#108713 = CARTESIAN_POINT('',(-6.575,3.007113331919,-1.754908248875)); +#108714 = LINE('',#108715,#108716); +#108715 = CARTESIAN_POINT('',(-6.575,3.007113331919,-1.754908248875)); +#108716 = VECTOR('',#108717,1.); +#108717 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#108718 = ORIENTED_EDGE('',*,*,#108719,.F.); +#108719 = EDGE_CURVE('',#108720,#108712,#108722,.T.); +#108720 = VERTEX_POINT('',#108721); +#108721 = CARTESIAN_POINT('',(-6.575,3.048990276684,-1.823044224175)); +#108722 = LINE('',#108723,#108724); +#108723 = CARTESIAN_POINT('',(-6.575,3.048990276684,-1.823044224175)); +#108724 = VECTOR('',#108725,1.); +#108725 = DIRECTION('',(0.,-0.523617705875,0.851953342675)); +#108726 = ORIENTED_EDGE('',*,*,#108727,.F.); +#108727 = EDGE_CURVE('',#108728,#108720,#108730,.T.); +#108728 = VERTEX_POINT('',#108729); +#108729 = CARTESIAN_POINT('',(-6.575,3.085599215824,-1.861862515465)); +#108730 = LINE('',#108731,#108732); +#108731 = CARTESIAN_POINT('',(-6.575,3.085599215824,-1.861862515465)); +#108732 = VECTOR('',#108733,1.); +#108733 = DIRECTION('',(0.,-0.686100528513,0.727506745518)); +#108734 = ORIENTED_EDGE('',*,*,#108735,.F.); +#108735 = EDGE_CURVE('',#108736,#108728,#108738,.T.); +#108736 = VERTEX_POINT('',#108737); +#108737 = CARTESIAN_POINT('',(-6.575,3.043989387903,-1.960132129338)); +#108738 = LINE('',#108739,#108740); +#108739 = CARTESIAN_POINT('',(-6.575,3.043989387903,-1.960132129338)); +#108740 = VECTOR('',#108741,1.); +#108741 = DIRECTION('',(0.,0.389911971444,0.920852134995)); +#108742 = ORIENTED_EDGE('',*,*,#108743,.F.); +#108743 = EDGE_CURVE('',#108744,#108736,#108746,.T.); +#108744 = VERTEX_POINT('',#108745); +#108745 = CARTESIAN_POINT('',(-6.575,3.115756682593,-1.947236482054)); +#108746 = LINE('',#108747,#108748); +#108747 = CARTESIAN_POINT('',(-6.575,3.115756682593,-1.947236482054)); +#108748 = VECTOR('',#108749,1.); +#108749 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#108750 = ORIENTED_EDGE('',*,*,#108751,.F.); +#108751 = EDGE_CURVE('',#108752,#108744,#108754,.T.); +#108752 = VERTEX_POINT('',#108753); +#108753 = CARTESIAN_POINT('',(-6.575,3.136561596553,-1.898101675117)); +#108754 = LINE('',#108755,#108756); +#108755 = CARTESIAN_POINT('',(-6.575,3.136561596553,-1.898101675117)); +#108756 = VECTOR('',#108757,1.); +#108757 = DIRECTION('',(0.,-0.389911971444,-0.920852134995)); +#108758 = ORIENTED_EDGE('',*,*,#108759,.F.); +#108759 = EDGE_CURVE('',#108760,#108752,#108762,.T.); +#108760 = VERTEX_POINT('',#108761); +#108761 = CARTESIAN_POINT('',(-6.575,3.199243415828,-1.917102859843)); +#108762 = LINE('',#108763,#108764); +#108763 = CARTESIAN_POINT('',(-6.575,3.199243415828,-1.917102859843)); +#108764 = VECTOR('',#108765,1.); +#108765 = DIRECTION('',(0.,-0.956996034471,0.290100999667)); +#108766 = ORIENTED_EDGE('',*,*,#108767,.F.); +#108767 = EDGE_CURVE('',#108768,#108760,#108770,.T.); +#108768 = VERTEX_POINT('',#108769); +#108769 = CARTESIAN_POINT('',(-6.575,3.25929125144,-1.921445191174)); +#108770 = LINE('',#108771,#108772); +#108771 = CARTESIAN_POINT('',(-6.575,3.25929125144,-1.921445191174)); +#108772 = VECTOR('',#108773,1.); +#108773 = DIRECTION('',(0.,-0.997395514455,7.212619319717E-02)); +#108774 = ORIENTED_EDGE('',*,*,#108775,.F.); +#108775 = EDGE_CURVE('',#108776,#108768,#108778,.T.); +#108776 = VERTEX_POINT('',#108777); +#108777 = CARTESIAN_POINT('',(-6.575,3.30235162004,-1.91370780428)); +#108778 = LINE('',#108779,#108780); +#108779 = CARTESIAN_POINT('',(-6.575,3.30235162004,-1.91370780428)); +#108780 = VECTOR('',#108781,1.); +#108781 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#108782 = ORIENTED_EDGE('',*,*,#108783,.F.); +#108783 = EDGE_CURVE('',#108784,#108776,#108786,.T.); +#108784 = VERTEX_POINT('',#108785); +#108785 = CARTESIAN_POINT('',(-6.575,3.357131437453,-1.888732440613)); +#108786 = LINE('',#108787,#108788); +#108787 = CARTESIAN_POINT('',(-6.575,3.357131437453,-1.888732440613)); +#108788 = VECTOR('',#108789,1.); +#108789 = DIRECTION('',(0.,-0.909893800272,-0.414841261481)); +#108790 = ORIENTED_EDGE('',*,*,#108791,.F.); +#108791 = EDGE_CURVE('',#108792,#108784,#108794,.T.); +#108792 = VERTEX_POINT('',#108793); +#108793 = CARTESIAN_POINT('',(-6.575,3.40927725067,-1.849098227243)); +#108794 = LINE('',#108795,#108796); +#108795 = CARTESIAN_POINT('',(-6.575,3.40927725067,-1.849098227243)); +#108796 = VECTOR('',#108797,1.); +#108797 = DIRECTION('',(0.,-0.796137220678,-0.605116125922)); +#108798 = ORIENTED_EDGE('',*,*,#108799,.F.); +#108799 = EDGE_CURVE('',#108800,#108792,#108802,.T.); +#108800 = VERTEX_POINT('',#108801); +#108801 = CARTESIAN_POINT('',(-6.575,3.444435607143,-1.797384293801)); +#108802 = LINE('',#108803,#108804); +#108803 = CARTESIAN_POINT('',(-6.575,3.444435607143,-1.797384293801)); +#108804 = VECTOR('',#108805,1.); +#108805 = DIRECTION('',(0.,-0.562232180267,-0.826979428687)); +#108806 = ORIENTED_EDGE('',*,*,#108807,.F.); +#108807 = EDGE_CURVE('',#108808,#108800,#108810,.T.); +#108808 = VERTEX_POINT('',#108809); +#108809 = CARTESIAN_POINT('',(-6.575,3.465240506065,-1.748249484268)); +#108810 = LINE('',#108811,#108812); +#108811 = CARTESIAN_POINT('',(-6.575,3.465240506065,-1.748249484268)); +#108812 = VECTOR('',#108813,1.); +#108813 = DIRECTION('',(0.,-0.389911714975,-0.92085224359)); +#108814 = ORIENTED_EDGE('',*,*,#108815,.F.); +#108815 = EDGE_CURVE('',#108816,#108808,#108818,.T.); +#108816 = VERTEX_POINT('',#108817); +#108817 = CARTESIAN_POINT('',(-6.575,3.471691951487,-1.701693813812)); +#108818 = LINE('',#108819,#108820); +#108819 = CARTESIAN_POINT('',(-6.575,3.471691951487,-1.701693813812)); +#108820 = VECTOR('',#108821,1.); +#108821 = DIRECTION('',(0.,-0.137263193072,-0.990534611121)); +#108822 = ORIENTED_EDGE('',*,*,#108823,.F.); +#108823 = EDGE_CURVE('',#108824,#108816,#108826,.T.); +#108824 = VERTEX_POINT('',#108825); +#108825 = CARTESIAN_POINT('',(-6.575,3.466423944016,-1.672376119536)); +#108826 = LINE('',#108827,#108828); +#108827 = CARTESIAN_POINT('',(-6.575,3.466423944016,-1.672376119536)); +#108828 = VECTOR('',#108829,1.); +#108829 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#108830 = ORIENTED_EDGE('',*,*,#108831,.F.); +#108831 = EDGE_CURVE('',#108832,#108824,#108834,.T.); +#108832 = VERTEX_POINT('',#108833); +#108833 = CARTESIAN_POINT('',(-6.575,3.444168476182,-1.630978707164)); +#108834 = LINE('',#108835,#108836); +#108835 = CARTESIAN_POINT('',(-6.575,3.444168476182,-1.630978707164)); +#108836 = VECTOR('',#108837,1.); +#108837 = DIRECTION('',(0.,0.473515061872,-0.880785720922)); +#108838 = ORIENTED_EDGE('',*,*,#108839,.F.); +#108839 = EDGE_CURVE('',#108840,#108832,#108842,.T.); +#108840 = VERTEX_POINT('',#108841); +#108841 = CARTESIAN_POINT('',(-6.575,3.390572087667,-1.580080685205)); +#108842 = LINE('',#108843,#108844); +#108843 = CARTESIAN_POINT('',(-6.575,3.390572087667,-1.580080685205)); +#108844 = VECTOR('',#108845,1.); +#108845 = DIRECTION('',(0.,0.725124722109,-0.688617555241)); +#108846 = ORIENTED_EDGE('',*,*,#108847,.F.); +#108847 = EDGE_CURVE('',#108552,#108840,#108848,.T.); +#108848 = LINE('',#108849,#108850); +#108849 = CARTESIAN_POINT('',(-6.575,3.288647333187,-1.507602375245)); +#108850 = VECTOR('',#108851,1.); +#108851 = DIRECTION('',(0.,0.81496104726,-0.579515738741)); +#108852 = PLANE('',#108853); +#108853 = AXIS2_PLACEMENT_3D('',#108854,#108855,#108856); +#108854 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#108855 = DIRECTION('',(-1.,0.,0.)); +#108856 = DIRECTION('',(0.,0.,1.)); +#108857 = ADVANCED_FACE('',(#108858),#108884,.T.); +#108858 = FACE_BOUND('',#108859,.T.); +#108859 = EDGE_LOOP('',(#108860,#108868,#108877,#108883)); +#108860 = ORIENTED_EDGE('',*,*,#108861,.T.); +#108861 = EDGE_CURVE('',#107482,#108862,#108864,.T.); +#108862 = VERTEX_POINT('',#108863); +#108863 = CARTESIAN_POINT('',(-6.585,3.888212958637,-1.701323038126)); +#108864 = LINE('',#108865,#108866); +#108865 = CARTESIAN_POINT('',(-6.575,3.888212958637,-1.701323038126)); +#108866 = VECTOR('',#108867,1.); +#108867 = DIRECTION('',(-1.,0.,0.)); +#108868 = ORIENTED_EDGE('',*,*,#108869,.F.); +#108869 = EDGE_CURVE('',#108870,#108862,#108872,.T.); +#108870 = VERTEX_POINT('',#108871); +#108871 = CARTESIAN_POINT('',(-6.585,3.729481711698,-1.45302836237)); +#108872 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#108873,#108874,#108875, + #108876),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#108873 = CARTESIAN_POINT('',(-6.585,3.729481711698,-1.45302836237)); +#108874 = CARTESIAN_POINT('',(-6.585,3.763254579199,-1.56056832345)); +#108875 = CARTESIAN_POINT('',(-6.585,3.816164994846,-1.643333215368)); +#108876 = CARTESIAN_POINT('',(-6.585,3.888212958637,-1.701323038126)); +#108877 = ORIENTED_EDGE('',*,*,#108878,.F.); +#108878 = EDGE_CURVE('',#107340,#108870,#108879,.T.); +#108879 = LINE('',#108880,#108881); +#108880 = CARTESIAN_POINT('',(-6.575,3.729481711698,-1.45302836237)); +#108881 = VECTOR('',#108882,1.); +#108882 = DIRECTION('',(-1.,0.,0.)); +#108883 = ORIENTED_EDGE('',*,*,#107490,.T.); +#108884 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#108885,#108886) + ,(#108887,#108888) + ,(#108889,#108890) + ,(#108891,#108892 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.983872867484E-02, + 0.951637762906),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#108885 = CARTESIAN_POINT('',(-6.575,3.729481721152,-1.453028392475)); +#108886 = CARTESIAN_POINT('',(-6.585,3.729481721152,-1.453028392475)); +#108887 = CARTESIAN_POINT('',(-6.575,3.76317884967,-1.560327168856)); +#108888 = CARTESIAN_POINT('',(-6.585,3.76317884967,-1.560327168856)); +#108889 = CARTESIAN_POINT('',(-6.575,3.815498116828,-1.642796459643)); +#108890 = CARTESIAN_POINT('',(-6.585,3.815498116828,-1.642796459643)); +#108891 = CARTESIAN_POINT('',(-6.575,3.88821295793,-1.701323037557)); +#108892 = CARTESIAN_POINT('',(-6.585,3.88821295793,-1.701323037557)); +#108893 = ADVANCED_FACE('',(#108894),#108912,.T.); +#108894 = FACE_BOUND('',#108895,.T.); +#108895 = EDGE_LOOP('',(#108896,#108897,#108905,#108911)); +#108896 = ORIENTED_EDGE('',*,*,#108878,.T.); +#108897 = ORIENTED_EDGE('',*,*,#108898,.F.); +#108898 = EDGE_CURVE('',#108899,#108870,#108901,.T.); +#108899 = VERTEX_POINT('',#108900); +#108900 = CARTESIAN_POINT('',(-6.585,3.557448991847,-1.47697108326)); +#108901 = LINE('',#108902,#108903); +#108902 = CARTESIAN_POINT('',(-6.585,3.557448991847,-1.47697108326)); +#108903 = VECTOR('',#108904,1.); +#108904 = DIRECTION('',(0.,0.990453567967,0.137846761668)); +#108905 = ORIENTED_EDGE('',*,*,#108906,.F.); +#108906 = EDGE_CURVE('',#107338,#108899,#108907,.T.); +#108907 = LINE('',#108908,#108909); +#108908 = CARTESIAN_POINT('',(-6.575,3.557448991847,-1.47697108326)); +#108909 = VECTOR('',#108910,1.); +#108910 = DIRECTION('',(-1.,0.,0.)); +#108911 = ORIENTED_EDGE('',*,*,#107337,.T.); +#108912 = PLANE('',#108913); +#108913 = AXIS2_PLACEMENT_3D('',#108914,#108915,#108916); +#108914 = CARTESIAN_POINT('',(-6.575,3.557448991847,-1.47697108326)); +#108915 = DIRECTION('',(0.,-0.137846761668,0.990453567967)); +#108916 = DIRECTION('',(-1.,0.,0.)); +#108917 = ADVANCED_FACE('',(#108918),#108937,.T.); +#108918 = FACE_BOUND('',#108919,.T.); +#108919 = EDGE_LOOP('',(#108920,#108921,#108930,#108936)); +#108920 = ORIENTED_EDGE('',*,*,#108906,.T.); +#108921 = ORIENTED_EDGE('',*,*,#108922,.F.); +#108922 = EDGE_CURVE('',#108923,#108899,#108925,.T.); +#108923 = VERTEX_POINT('',#108924); +#108924 = CARTESIAN_POINT('',(-6.585,3.795046644888,-1.817565380018)); +#108925 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#108926,#108927,#108928, + #108929),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#108926 = CARTESIAN_POINT('',(-6.585,3.795046644888,-1.817565380018)); +#108927 = CARTESIAN_POINT('',(-6.585,3.691350754809,-1.741227550185)); +#108928 = CARTESIAN_POINT('',(-6.585,3.612428512883,-1.62772141037)); +#108929 = CARTESIAN_POINT('',(-6.585,3.557448991847,-1.47697108326)); +#108930 = ORIENTED_EDGE('',*,*,#108931,.F.); +#108931 = EDGE_CURVE('',#107348,#108923,#108932,.T.); +#108932 = LINE('',#108933,#108934); +#108933 = CARTESIAN_POINT('',(-6.575,3.795046644888,-1.817565380018)); +#108934 = VECTOR('',#108935,1.); +#108935 = DIRECTION('',(-1.,0.,0.)); +#108936 = ORIENTED_EDGE('',*,*,#107347,.T.); +#108937 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#108938,#108939) + ,(#108940,#108941) + ,(#108942,#108943) + ,(#108944,#108945 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.667165245588E-02, + 0.97043502694),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#108938 = CARTESIAN_POINT('',(-6.575,3.795046645755,-1.817565380656)); +#108939 = CARTESIAN_POINT('',(-6.585,3.795046645755,-1.817565380656)); +#108940 = CARTESIAN_POINT('',(-6.575,3.691350760269,-1.741227554513)); +#108941 = CARTESIAN_POINT('',(-6.585,3.691350760269,-1.741227554513)); +#108942 = CARTESIAN_POINT('',(-6.575,3.612428520678,-1.62772142178)); +#108943 = CARTESIAN_POINT('',(-6.585,3.612428520678,-1.62772142178)); +#108944 = CARTESIAN_POINT('',(-6.575,3.557448999833,-1.476971105154)); +#108945 = CARTESIAN_POINT('',(-6.585,3.557448999833,-1.476971105154)); +#108946 = ADVANCED_FACE('',(#108947),#108966,.T.); +#108947 = FACE_BOUND('',#108948,.T.); +#108948 = EDGE_LOOP('',(#108949,#108950,#108959,#108965)); +#108949 = ORIENTED_EDGE('',*,*,#108931,.T.); +#108950 = ORIENTED_EDGE('',*,*,#108951,.F.); +#108951 = EDGE_CURVE('',#108952,#108923,#108954,.T.); +#108952 = VERTEX_POINT('',#108953); +#108953 = CARTESIAN_POINT('',(-6.585,4.145375314069,-1.932769167176)); +#108954 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#108955,#108956,#108957, + #108958),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#108955 = CARTESIAN_POINT('',(-6.585,4.145375314069,-1.932769167176)); +#108956 = CARTESIAN_POINT('',(-6.585,4.015907379699,-1.932769167176)); +#108957 = CARTESIAN_POINT('',(-6.585,3.899740931106,-1.894638199391)); +#108958 = CARTESIAN_POINT('',(-6.585,3.795046644888,-1.817565380018)); +#108959 = ORIENTED_EDGE('',*,*,#108960,.F.); +#108960 = EDGE_CURVE('',#107357,#108952,#108961,.T.); +#108961 = LINE('',#108962,#108963); +#108962 = CARTESIAN_POINT('',(-6.575,4.145375314069,-1.932769167176)); +#108963 = VECTOR('',#108964,1.); +#108964 = DIRECTION('',(-1.,0.,0.)); +#108965 = ORIENTED_EDGE('',*,*,#107356,.T.); +#108966 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#108967,#108968) + ,(#108969,#108970) + ,(#108971,#108972) + ,(#108973,#108974 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.327561808277E-02, + 0.966613065399),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#108967 = CARTESIAN_POINT('',(-6.575,4.145375313902,-1.932769167176)); +#108968 = CARTESIAN_POINT('',(-6.585,4.145375313902,-1.932769167176)); +#108969 = CARTESIAN_POINT('',(-6.575,4.015907379696,-1.932769167143)); +#108970 = CARTESIAN_POINT('',(-6.585,4.015907379696,-1.932769167143)); +#108971 = CARTESIAN_POINT('',(-6.575,3.899740931235,-1.894638199416)); +#108972 = CARTESIAN_POINT('',(-6.585,3.899740931235,-1.894638199416)); +#108973 = CARTESIAN_POINT('',(-6.575,3.795046645124,-1.817565380192)); +#108974 = CARTESIAN_POINT('',(-6.585,3.795046645124,-1.817565380192)); +#108975 = ADVANCED_FACE('',(#108976),#108995,.T.); +#108976 = FACE_BOUND('',#108977,.T.); +#108977 = EDGE_LOOP('',(#108978,#108979,#108988,#108994)); +#108978 = ORIENTED_EDGE('',*,*,#108960,.T.); +#108979 = ORIENTED_EDGE('',*,*,#108980,.F.); +#108980 = EDGE_CURVE('',#108981,#108952,#108983,.T.); +#108981 = VERTEX_POINT('',#108982); +#108982 = CARTESIAN_POINT('',(-6.585,4.521586134592,-1.788438242598)); +#108983 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#108984,#108985,#108986, + #108987),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#108984 = CARTESIAN_POINT('',(-6.585,4.521586134592,-1.788438242598)); +#108985 = CARTESIAN_POINT('',(-6.585,4.42914065392,-1.884883764139)); +#108986 = CARTESIAN_POINT('',(-6.585,4.303219797921,-1.932769167176)); +#108987 = CARTESIAN_POINT('',(-6.585,4.145375314069,-1.932769167176)); +#108988 = ORIENTED_EDGE('',*,*,#108989,.F.); +#108989 = EDGE_CURVE('',#107366,#108981,#108990,.T.); +#108990 = LINE('',#108991,#108992); +#108991 = CARTESIAN_POINT('',(-6.575,4.521586134592,-1.788438242598)); +#108992 = VECTOR('',#108993,1.); +#108993 = DIRECTION('',(-1.,0.,0.)); +#108994 = ORIENTED_EDGE('',*,*,#107365,.T.); +#108995 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#108996,#108997) + ,(#108998,#108999) + ,(#109000,#109001) + ,(#109002,#109003 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.354200756341E-02, + 0.971343274414),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#108996 = CARTESIAN_POINT('',(-6.575,4.521586132687,-1.788438244586)); +#108997 = CARTESIAN_POINT('',(-6.585,4.521586132687,-1.788438244586)); +#108998 = CARTESIAN_POINT('',(-6.575,4.429140655629,-1.884883761208)); +#108999 = CARTESIAN_POINT('',(-6.585,4.429140655629,-1.884883761208)); +#109000 = CARTESIAN_POINT('',(-6.575,4.303219806209,-1.932769163612)); +#109001 = CARTESIAN_POINT('',(-6.585,4.303219806209,-1.932769163612)); +#109002 = CARTESIAN_POINT('',(-6.575,4.145375331693,-1.932769167175)); +#109003 = CARTESIAN_POINT('',(-6.585,4.145375331693,-1.932769167175)); +#109004 = ADVANCED_FACE('',(#109005),#109024,.T.); +#109005 = FACE_BOUND('',#109006,.T.); +#109006 = EDGE_LOOP('',(#109007,#109008,#109017,#109023)); +#109007 = ORIENTED_EDGE('',*,*,#108989,.T.); +#109008 = ORIENTED_EDGE('',*,*,#109009,.F.); +#109009 = EDGE_CURVE('',#109010,#108981,#109012,.T.); +#109010 = VERTEX_POINT('',#109011); +#109011 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.374106120443)); +#109012 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109013,#109014,#109015, + #109016),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109013 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.374106120443)); +#109014 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.554119786)); +#109015 = CARTESIAN_POINT('',(-6.585,4.613588128698,-1.692455396926)); +#109016 = CARTESIAN_POINT('',(-6.585,4.521586134592,-1.788438242598)); +#109017 = ORIENTED_EDGE('',*,*,#109018,.F.); +#109018 = EDGE_CURVE('',#107375,#109010,#109019,.T.); +#109019 = LINE('',#109020,#109021); +#109020 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.374106120443)); +#109021 = VECTOR('',#109022,1.); +#109022 = DIRECTION('',(-1.,0.,0.)); +#109023 = ORIENTED_EDGE('',*,*,#107374,.T.); +#109024 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109025,#109026) + ,(#109027,#109028) + ,(#109029,#109030) + ,(#109031,#109032 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.687955336566E-02, + 0.963352162319),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109025 = CARTESIAN_POINT('',(-6.575,4.659700011921,-1.374106169694)); +#109026 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.374106169694)); +#109027 = CARTESIAN_POINT('',(-6.575,4.65970000351,-1.554119810938)); +#109028 = CARTESIAN_POINT('',(-6.585,4.65970000351,-1.554119810938)); +#109029 = CARTESIAN_POINT('',(-6.575,4.613588120458,-1.692455405228)); +#109030 = CARTESIAN_POINT('',(-6.585,4.613588120458,-1.692455405228)); +#109031 = CARTESIAN_POINT('',(-6.575,4.521586135043,-1.788438242128)); +#109032 = CARTESIAN_POINT('',(-6.585,4.521586135043,-1.788438242128)); +#109033 = ADVANCED_FACE('',(#109034),#109053,.T.); +#109034 = FACE_BOUND('',#109035,.T.); +#109035 = EDGE_LOOP('',(#109036,#109037,#109046,#109052)); +#109036 = ORIENTED_EDGE('',*,*,#109018,.T.); +#109037 = ORIENTED_EDGE('',*,*,#109038,.F.); +#109038 = EDGE_CURVE('',#109039,#109010,#109041,.T.); +#109039 = VERTEX_POINT('',#109040); +#109040 = CARTESIAN_POINT('',(-6.585,4.448786425012,-0.793148265654)); +#109041 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109042,#109043,#109044, + #109045),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109042 = CARTESIAN_POINT('',(-6.585,4.448786425012,-0.793148265654)); +#109043 = CARTESIAN_POINT('',(-6.585,4.589645427179,-0.946684610224)); +#109044 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.139999722815)); +#109045 = CARTESIAN_POINT('',(-6.585,4.659700011921,-1.374106120443)); +#109046 = ORIENTED_EDGE('',*,*,#109047,.F.); +#109047 = EDGE_CURVE('',#107384,#109039,#109048,.T.); +#109048 = LINE('',#109049,#109050); +#109049 = CARTESIAN_POINT('',(-6.575,4.448786425012,-0.793148265654)); +#109050 = VECTOR('',#109051,1.); +#109051 = DIRECTION('',(-1.,0.,0.)); +#109052 = ORIENTED_EDGE('',*,*,#107383,.T.); +#109053 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109054,#109055) + ,(#109056,#109057) + ,(#109058,#109059) + ,(#109060,#109061 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.156168880351E-02, + 0.980703370079),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109054 = CARTESIAN_POINT('',(-6.575,4.448786425301,-0.79314826597)); +#109055 = CARTESIAN_POINT('',(-6.585,4.448786425301,-0.79314826597)); +#109056 = CARTESIAN_POINT('',(-6.575,4.589645426325,-0.946684609453)); +#109057 = CARTESIAN_POINT('',(-6.585,4.589645426325,-0.946684609453)); +#109058 = CARTESIAN_POINT('',(-6.575,4.659700010975,-1.139999720367)); +#109059 = CARTESIAN_POINT('',(-6.585,4.659700010975,-1.139999720367)); +#109060 = CARTESIAN_POINT('',(-6.575,4.65970001192,-1.374106115705)); +#109061 = CARTESIAN_POINT('',(-6.585,4.65970001192,-1.374106115705)); +#109062 = ADVANCED_FACE('',(#109063),#109082,.T.); +#109063 = FACE_BOUND('',#109064,.T.); +#109064 = EDGE_LOOP('',(#109065,#109066,#109075,#109081)); +#109065 = ORIENTED_EDGE('',*,*,#109047,.T.); +#109066 = ORIENTED_EDGE('',*,*,#109067,.F.); +#109067 = EDGE_CURVE('',#109068,#109039,#109070,.T.); +#109068 = VERTEX_POINT('',#109069); +#109069 = CARTESIAN_POINT('',(-6.585,3.981323501182,-0.588430779552)); +#109070 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109071,#109072,#109073, + #109074),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109071 = CARTESIAN_POINT('',(-6.585,3.981323501182,-0.588430779552)); +#109072 = CARTESIAN_POINT('',(-6.585,4.16754445703,-0.588430779552)); +#109073 = CARTESIAN_POINT('',(-6.585,4.32361544044,-0.656711863851)); +#109074 = CARTESIAN_POINT('',(-6.585,4.448786425012,-0.793148265654)); +#109075 = ORIENTED_EDGE('',*,*,#109076,.F.); +#109076 = EDGE_CURVE('',#107393,#109068,#109077,.T.); +#109077 = LINE('',#109078,#109079); +#109078 = CARTESIAN_POINT('',(-6.575,3.981323501182,-0.588430779552)); +#109079 = VECTOR('',#109080,1.); +#109080 = DIRECTION('',(-1.,0.,0.)); +#109081 = ORIENTED_EDGE('',*,*,#107392,.T.); +#109082 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109083,#109084) + ,(#109085,#109086) + ,(#109087,#109088) + ,(#109089,#109090 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.360058165914E-02, + 0.976073205993),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109083 = CARTESIAN_POINT('',(-6.575,3.981323501332,-0.588430779552)); +#109084 = CARTESIAN_POINT('',(-6.585,3.981323501332,-0.588430779552)); +#109085 = CARTESIAN_POINT('',(-6.575,4.167544457119,-0.588430779589)); +#109086 = CARTESIAN_POINT('',(-6.585,4.167544457119,-0.588430779589)); +#109087 = CARTESIAN_POINT('',(-6.575,4.323615440481,-0.656711863892)); +#109088 = CARTESIAN_POINT('',(-6.585,4.323615440481,-0.656711863892)); +#109089 = CARTESIAN_POINT('',(-6.575,4.44878642502,-0.793148265664)); +#109090 = CARTESIAN_POINT('',(-6.585,4.44878642502,-0.793148265664)); +#109091 = ADVANCED_FACE('',(#109092),#109111,.T.); +#109092 = FACE_BOUND('',#109093,.T.); +#109093 = EDGE_LOOP('',(#109094,#109095,#109104,#109110)); +#109094 = ORIENTED_EDGE('',*,*,#109076,.T.); +#109095 = ORIENTED_EDGE('',*,*,#109096,.F.); +#109096 = EDGE_CURVE('',#109097,#109068,#109099,.T.); +#109097 = VERTEX_POINT('',#109098); +#109098 = CARTESIAN_POINT('',(-6.585,3.647231599773,-0.699529431334)); +#109099 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109100,#109101,#109102, + #109103),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109100 = CARTESIAN_POINT('',(-6.585,3.647231599773,-0.699529431334)); +#109101 = CARTESIAN_POINT('',(-6.585,3.732142039847,-0.625675063705)); +#109102 = CARTESIAN_POINT('',(-6.585,3.843874659848,-0.588430779552)); +#109103 = CARTESIAN_POINT('',(-6.585,3.981323501182,-0.588430779552)); +#109104 = ORIENTED_EDGE('',*,*,#109105,.F.); +#109105 = EDGE_CURVE('',#107402,#109097,#109106,.T.); +#109106 = LINE('',#109107,#109108); +#109107 = CARTESIAN_POINT('',(-6.575,3.647231599773,-0.699529431334)); +#109108 = VECTOR('',#109109,1.); +#109109 = DIRECTION('',(-1.,0.,0.)); +#109110 = ORIENTED_EDGE('',*,*,#107401,.T.); +#109111 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109112,#109113) + ,(#109114,#109115) + ,(#109116,#109117) + ,(#109118,#109119 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.058325910085E-02, + 0.966496762358),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109112 = CARTESIAN_POINT('',(-6.575,3.647231601452,-0.699529429874)); +#109113 = CARTESIAN_POINT('',(-6.585,3.647231601452,-0.699529429874)); +#109114 = CARTESIAN_POINT('',(-6.575,3.732142035658,-0.62567506814)); +#109115 = CARTESIAN_POINT('',(-6.585,3.732142035658,-0.62567506814)); +#109116 = CARTESIAN_POINT('',(-6.575,3.843874645852,-0.58843078452)); +#109117 = CARTESIAN_POINT('',(-6.585,3.843874645852,-0.58843078452)); +#109118 = CARTESIAN_POINT('',(-6.575,3.981323473683,-0.588430779552)); +#109119 = CARTESIAN_POINT('',(-6.585,3.981323473683,-0.588430779552)); +#109120 = ADVANCED_FACE('',(#109121),#109140,.T.); +#109121 = FACE_BOUND('',#109122,.T.); +#109122 = EDGE_LOOP('',(#109123,#109124,#109133,#109139)); +#109123 = ORIENTED_EDGE('',*,*,#109105,.T.); +#109124 = ORIENTED_EDGE('',*,*,#109125,.F.); +#109125 = EDGE_CURVE('',#109126,#109097,#109128,.T.); +#109126 = VERTEX_POINT('',#109127); +#109127 = CARTESIAN_POINT('',(-6.585,3.498035642219,-0.997230302668)); +#109128 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109129,#109130,#109131, + #109132),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109129 = CARTESIAN_POINT('',(-6.585,3.498035642219,-0.997230302668)); +#109130 = CARTESIAN_POINT('',(-6.585,3.512223955703,-0.873082947111)); +#109131 = CARTESIAN_POINT('',(-6.585,3.561882820439,-0.773765062666)); +#109132 = CARTESIAN_POINT('',(-6.585,3.647231599773,-0.699529431334)); +#109133 = ORIENTED_EDGE('',*,*,#109134,.F.); +#109134 = EDGE_CURVE('',#107411,#109126,#109135,.T.); +#109135 = LINE('',#109136,#109137); +#109136 = CARTESIAN_POINT('',(-6.575,3.498035642219,-0.997230302668)); +#109137 = VECTOR('',#109138,1.); +#109138 = DIRECTION('',(-1.,0.,0.)); +#109139 = ORIENTED_EDGE('',*,*,#107410,.T.); +#109140 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109141,#109142) + ,(#109143,#109144) + ,(#109145,#109146) + ,(#109147,#109148 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.435333136559E-02, + 0.961672371986),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109141 = CARTESIAN_POINT('',(-6.575,3.498035643184,-0.997230294224)); +#109142 = CARTESIAN_POINT('',(-6.585,3.498035643184,-0.997230294224)); +#109143 = CARTESIAN_POINT('',(-6.575,3.512223957853,-0.873082943499)); +#109144 = CARTESIAN_POINT('',(-6.585,3.512223957853,-0.873082943499)); +#109145 = CARTESIAN_POINT('',(-6.575,3.561882821662,-0.773765062409)); +#109146 = CARTESIAN_POINT('',(-6.585,3.561882821662,-0.773765062409)); +#109147 = CARTESIAN_POINT('',(-6.575,3.647231597935,-0.699529432933)); +#109148 = CARTESIAN_POINT('',(-6.585,3.647231597935,-0.699529432933)); +#109149 = ADVANCED_FACE('',(#109150),#109168,.T.); +#109150 = FACE_BOUND('',#109151,.T.); +#109151 = EDGE_LOOP('',(#109152,#109153,#109161,#109167)); +#109152 = ORIENTED_EDGE('',*,*,#109134,.T.); +#109153 = ORIENTED_EDGE('',*,*,#109154,.F.); +#109154 = EDGE_CURVE('',#109155,#109126,#109157,.T.); +#109155 = VERTEX_POINT('',#109156); +#109156 = CARTESIAN_POINT('',(-6.585,3.660313954663,-1.012305288887)); +#109157 = LINE('',#109158,#109159); +#109158 = CARTESIAN_POINT('',(-6.585,3.660313954663,-1.012305288887)); +#109159 = VECTOR('',#109160,1.); +#109160 = DIRECTION('',(0.,-0.995712905188,9.249762397742E-02)); +#109161 = ORIENTED_EDGE('',*,*,#109162,.F.); +#109162 = EDGE_CURVE('',#107420,#109155,#109163,.T.); +#109163 = LINE('',#109164,#109165); +#109164 = CARTESIAN_POINT('',(-6.575,3.660313954663,-1.012305288887)); +#109165 = VECTOR('',#109166,1.); +#109166 = DIRECTION('',(-1.,0.,0.)); +#109167 = ORIENTED_EDGE('',*,*,#107419,.T.); +#109168 = PLANE('',#109169); +#109169 = AXIS2_PLACEMENT_3D('',#109170,#109171,#109172); +#109170 = CARTESIAN_POINT('',(-6.575,3.660313954663,-1.012305288887)); +#109171 = DIRECTION('',(0.,-9.249762397742E-02,-0.995712905188)); +#109172 = DIRECTION('',(0.,-0.995712905188,9.249762397742E-02)); +#109173 = ADVANCED_FACE('',(#109174),#109193,.T.); +#109174 = FACE_BOUND('',#109175,.T.); +#109175 = EDGE_LOOP('',(#109176,#109177,#109186,#109192)); +#109176 = ORIENTED_EDGE('',*,*,#109162,.T.); +#109177 = ORIENTED_EDGE('',*,*,#109178,.F.); +#109178 = EDGE_CURVE('',#109179,#109155,#109181,.T.); +#109179 = VERTEX_POINT('',#109180); +#109180 = CARTESIAN_POINT('',(-6.585,3.766725918365,-0.802141612148)); +#109181 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109182,#109183,#109184, + #109185),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109182 = CARTESIAN_POINT('',(-6.585,3.766725918365,-0.802141612148)); +#109183 = CARTESIAN_POINT('',(-6.585,3.713519934476,-0.848253444187)); +#109184 = CARTESIAN_POINT('',(-6.585,3.678049279909,-0.9183080031)); +#109185 = CARTESIAN_POINT('',(-6.585,3.660313954663,-1.012305288887)); +#109186 = ORIENTED_EDGE('',*,*,#109187,.F.); +#109187 = EDGE_CURVE('',#107428,#109179,#109188,.T.); +#109188 = LINE('',#109189,#109190); +#109189 = CARTESIAN_POINT('',(-6.575,3.766725918365,-0.802141612148)); +#109190 = VECTOR('',#109191,1.); +#109191 = DIRECTION('',(-1.,0.,0.)); +#109192 = ORIENTED_EDGE('',*,*,#107427,.T.); +#109193 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109194,#109195) + ,(#109196,#109197) + ,(#109198,#109199) + ,(#109200,#109201 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.099937057837E-02, + 0.950732747253),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109194 = CARTESIAN_POINT('',(-6.575,3.767685690995,-0.801314056735)); +#109195 = CARTESIAN_POINT('',(-6.585,3.767685690995,-0.801314056735)); +#109196 = CARTESIAN_POINT('',(-6.575,3.713946248793,-0.847413553984)); +#109197 = CARTESIAN_POINT('',(-6.585,3.713946248793,-0.847413553984)); +#109198 = CARTESIAN_POINT('',(-6.575,3.678155695954,-0.917743992895)); +#109199 = CARTESIAN_POINT('',(-6.585,3.678155695954,-0.917743992895)); +#109200 = CARTESIAN_POINT('',(-6.575,3.660313953589,-1.012305294578)); +#109201 = CARTESIAN_POINT('',(-6.585,3.660313953589,-1.012305294578)); +#109202 = ADVANCED_FACE('',(#109203),#109222,.T.); +#109203 = FACE_BOUND('',#109204,.T.); +#109204 = EDGE_LOOP('',(#109205,#109206,#109215,#109221)); +#109205 = ORIENTED_EDGE('',*,*,#109187,.T.); +#109206 = ORIENTED_EDGE('',*,*,#109207,.F.); +#109207 = EDGE_CURVE('',#109208,#109179,#109210,.T.); +#109208 = VERTEX_POINT('',#109209); +#109209 = CARTESIAN_POINT('',(-6.585,3.973342594218,-0.732087027407)); +#109210 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109211,#109212,#109213, + #109214),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109211 = CARTESIAN_POINT('',(-6.585,3.973342594218,-0.732087027407)); +#109212 = CARTESIAN_POINT('',(-6.585,3.889486309905,-0.732087027407)); +#109213 = CARTESIAN_POINT('',(-6.585,3.82061408462,-0.755438555654)); +#109214 = CARTESIAN_POINT('',(-6.585,3.766725918365,-0.802141612148)); +#109215 = ORIENTED_EDGE('',*,*,#109216,.F.); +#109216 = EDGE_CURVE('',#107437,#109208,#109217,.T.); +#109217 = LINE('',#109218,#109219); +#109218 = CARTESIAN_POINT('',(-6.575,3.973342594218,-0.732087027407)); +#109219 = VECTOR('',#109220,1.); +#109220 = DIRECTION('',(-1.,0.,0.)); +#109221 = ORIENTED_EDGE('',*,*,#107436,.T.); +#109222 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109223,#109224) + ,(#109225,#109226) + ,(#109227,#109228) + ,(#109229,#109230 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.099708781995E-02, + 0.938203860237),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109223 = CARTESIAN_POINT('',(-6.575,3.973342549823,-0.732087027407)); +#109224 = CARTESIAN_POINT('',(-6.585,3.973342549823,-0.732087027407)); +#109225 = CARTESIAN_POINT('',(-6.575,3.889099674928,-0.732087035819)); +#109226 = CARTESIAN_POINT('',(-6.585,3.889099674928,-0.732087035819)); +#109227 = CARTESIAN_POINT('',(-6.575,3.819931934925,-0.756029754558)); +#109228 = CARTESIAN_POINT('',(-6.585,3.819931934925,-0.756029754558)); +#109229 = CARTESIAN_POINT('',(-6.575,3.766725924495,-0.802141606835)); +#109230 = CARTESIAN_POINT('',(-6.585,3.766725924495,-0.802141606835)); +#109231 = ADVANCED_FACE('',(#109232),#109251,.T.); +#109232 = FACE_BOUND('',#109233,.T.); +#109233 = EDGE_LOOP('',(#109234,#109235,#109244,#109250)); +#109234 = ORIENTED_EDGE('',*,*,#109216,.T.); +#109235 = ORIENTED_EDGE('',*,*,#109236,.F.); +#109236 = EDGE_CURVE('',#109237,#109208,#109239,.T.); +#109237 = VERTEX_POINT('',#109238); +#109238 = CARTESIAN_POINT('',(-6.585,4.359255511347,-0.943906934137)); +#109239 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109240,#109241,#109242, + #109243),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109240 = CARTESIAN_POINT('',(-6.585,4.359255511347,-0.943906934137)); +#109241 = CARTESIAN_POINT('',(-6.585,4.261309614287,-0.802693662984)); +#109242 = CARTESIAN_POINT('',(-6.585,4.132671975244,-0.732087027407)); +#109243 = CARTESIAN_POINT('',(-6.585,3.973342594218,-0.732087027407)); +#109244 = ORIENTED_EDGE('',*,*,#109245,.F.); +#109245 = EDGE_CURVE('',#107446,#109237,#109246,.T.); +#109246 = LINE('',#109247,#109248); +#109247 = CARTESIAN_POINT('',(-6.575,4.359255511347,-0.943906934137)); +#109248 = VECTOR('',#109249,1.); +#109249 = DIRECTION('',(-1.,0.,0.)); +#109250 = ORIENTED_EDGE('',*,*,#107445,.T.); +#109251 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109252,#109253) + ,(#109254,#109255) + ,(#109256,#109257) + ,(#109258,#109259 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.542829985559E-02, + 0.972359484329),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109252 = CARTESIAN_POINT('',(-6.575,4.359255508315,-0.943906929766)); +#109253 = CARTESIAN_POINT('',(-6.585,4.359255508315,-0.943906929766)); +#109254 = CARTESIAN_POINT('',(-6.575,4.26154176031,-0.803028361346)); +#109255 = CARTESIAN_POINT('',(-6.585,4.26154176031,-0.803028361346)); +#109256 = CARTESIAN_POINT('',(-6.575,4.132960577673,-0.732087027853)); +#109257 = CARTESIAN_POINT('',(-6.585,4.132960577673,-0.732087027853)); +#109258 = CARTESIAN_POINT('',(-6.575,3.973342595726,-0.732087027407)); +#109259 = CARTESIAN_POINT('',(-6.585,3.973342595726,-0.732087027407)); +#109260 = ADVANCED_FACE('',(#109261),#109280,.T.); +#109261 = FACE_BOUND('',#109262,.T.); +#109262 = EDGE_LOOP('',(#109263,#109264,#109273,#109279)); +#109263 = ORIENTED_EDGE('',*,*,#109245,.T.); +#109264 = ORIENTED_EDGE('',*,*,#109265,.F.); +#109265 = EDGE_CURVE('',#109266,#109237,#109268,.T.); +#109266 = VERTEX_POINT('',#109267); +#109267 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.377653198814)); +#109268 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109269,#109270,#109271, + #109272),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109269 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.377653198814)); +#109270 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.211061597499)); +#109271 = CARTESIAN_POINT('',(-6.585,4.44427217252,-1.066479509274)); +#109272 = CARTESIAN_POINT('',(-6.585,4.359255511347,-0.943906934137)); +#109273 = ORIENTED_EDGE('',*,*,#109274,.F.); +#109274 = EDGE_CURVE('',#107455,#109266,#109275,.T.); +#109275 = LINE('',#109276,#109277); +#109276 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653198814)); +#109277 = VECTOR('',#109278,1.); +#109278 = DIRECTION('',(-1.,0.,0.)); +#109279 = ORIENTED_EDGE('',*,*,#107454,.T.); +#109280 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109281,#109282) + ,(#109283,#109284) + ,(#109285,#109286) + ,(#109287,#109288 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.681536342464E-02, + 0.96985895611),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109281 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653193668)); +#109282 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.377653193668)); +#109283 = CARTESIAN_POINT('',(-6.575,4.48678050223,-1.210941055004)); +#109284 = CARTESIAN_POINT('',(-6.585,4.48678050223,-1.210941055004)); +#109285 = CARTESIAN_POINT('',(-6.575,4.444215678111,-1.06639805879)); +#109286 = CARTESIAN_POINT('',(-6.585,4.444215678111,-1.06639805879)); +#109287 = CARTESIAN_POINT('',(-6.575,4.359255511655,-0.943906934581)); +#109288 = CARTESIAN_POINT('',(-6.585,4.359255511655,-0.943906934581)); +#109289 = ADVANCED_FACE('',(#109290),#109309,.T.); +#109290 = FACE_BOUND('',#109291,.T.); +#109291 = EDGE_LOOP('',(#109292,#109293,#109302,#109308)); +#109292 = ORIENTED_EDGE('',*,*,#109274,.T.); +#109293 = ORIENTED_EDGE('',*,*,#109294,.F.); +#109294 = EDGE_CURVE('',#109295,#109266,#109297,.T.); +#109295 = VERTEX_POINT('',#109296); +#109296 = CARTESIAN_POINT('',(-6.585,4.388570197286,-1.683793884664)); +#109297 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109298,#109299,#109300, + #109301),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109298 = CARTESIAN_POINT('',(-6.585,4.388570197286,-1.683793884664)); +#109299 = CARTESIAN_POINT('',(-6.585,4.454043734499,-1.613454074564)); +#109300 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.511407179281)); +#109301 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.377653198814)); +#109302 = ORIENTED_EDGE('',*,*,#109303,.F.); +#109303 = EDGE_CURVE('',#107464,#109295,#109304,.T.); +#109304 = LINE('',#109305,#109306); +#109305 = CARTESIAN_POINT('',(-6.575,4.388570197286,-1.683793884664)); +#109306 = VECTOR('',#109307,1.); +#109307 = DIRECTION('',(-1.,0.,0.)); +#109308 = ORIENTED_EDGE('',*,*,#107463,.T.); +#109309 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109310,#109311) + ,(#109312,#109313) + ,(#109314,#109315) + ,(#109316,#109317 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.494344454163E-02, + 0.963528344577),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109310 = CARTESIAN_POINT('',(-6.575,4.387389453789,-1.685055179095)); +#109311 = CARTESIAN_POINT('',(-6.585,4.387389453789,-1.685055179095)); +#109312 = CARTESIAN_POINT('',(-6.575,4.453575211383,-1.614755769522)); +#109313 = CARTESIAN_POINT('',(-6.585,4.453575211383,-1.614755769522)); +#109314 = CARTESIAN_POINT('',(-6.575,4.48678050359,-1.512358387942)); +#109315 = CARTESIAN_POINT('',(-6.585,4.48678050359,-1.512358387942)); +#109316 = CARTESIAN_POINT('',(-6.575,4.486780503106,-1.377653195872)); +#109317 = CARTESIAN_POINT('',(-6.585,4.486780503106,-1.377653195872)); +#109318 = ADVANCED_FACE('',(#109319),#109338,.T.); +#109319 = FACE_BOUND('',#109320,.T.); +#109320 = EDGE_LOOP('',(#109321,#109322,#109331,#109337)); +#109321 = ORIENTED_EDGE('',*,*,#109303,.T.); +#109322 = ORIENTED_EDGE('',*,*,#109323,.F.); +#109323 = EDGE_CURVE('',#109324,#109295,#109326,.T.); +#109324 = VERTEX_POINT('',#109325); +#109325 = CARTESIAN_POINT('',(-6.585,4.132073828292,-1.789112962908)); +#109326 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109327,#109328,#109329, + #109330),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109327 = CARTESIAN_POINT('',(-6.585,4.132073828292,-1.789112962908)); +#109328 = CARTESIAN_POINT('',(-6.585,4.237716169209,-1.789112962908)); +#109329 = CARTESIAN_POINT('',(-6.585,4.323214958873,-1.754006603493)); +#109330 = CARTESIAN_POINT('',(-6.585,4.388570197286,-1.683793884664)); +#109331 = ORIENTED_EDGE('',*,*,#109332,.F.); +#109332 = EDGE_CURVE('',#107473,#109324,#109333,.T.); +#109333 = LINE('',#109334,#109335); +#109334 = CARTESIAN_POINT('',(-6.575,4.132073828292,-1.789112962908)); +#109335 = VECTOR('',#109336,1.); +#109336 = DIRECTION('',(-1.,0.,0.)); +#109337 = ORIENTED_EDGE('',*,*,#107472,.T.); +#109338 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109339,#109340) + ,(#109341,#109342) + ,(#109343,#109344) + ,(#109345,#109346 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.987503154368E-02, + 0.955796727505),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109339 = CARTESIAN_POINT('',(-6.575,4.132073841503,-1.789112962908)); +#109340 = CARTESIAN_POINT('',(-6.585,4.132073841503,-1.789112962908)); +#109341 = CARTESIAN_POINT('',(-6.575,4.237599047291,-1.789112960021)); +#109342 = CARTESIAN_POINT('',(-6.585,4.237599047291,-1.789112960021)); +#109343 = CARTESIAN_POINT('',(-6.575,4.322728651663,-1.754529053422)); +#109344 = CARTESIAN_POINT('',(-6.585,4.322728651663,-1.754529053422)); +#109345 = CARTESIAN_POINT('',(-6.575,4.388570194316,-1.683793887856)); +#109346 = CARTESIAN_POINT('',(-6.585,4.388570194316,-1.683793887856)); +#109347 = ADVANCED_FACE('',(#109348),#109360,.T.); +#109348 = FACE_BOUND('',#109349,.T.); +#109349 = EDGE_LOOP('',(#109350,#109351,#109358,#109359)); +#109350 = ORIENTED_EDGE('',*,*,#109332,.T.); +#109351 = ORIENTED_EDGE('',*,*,#109352,.F.); +#109352 = EDGE_CURVE('',#108862,#109324,#109353,.T.); +#109353 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#109354,#109355,#109356, + #109357),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#109354 = CARTESIAN_POINT('',(-6.585,3.888212958637,-1.701323038126)); +#109355 = CARTESIAN_POINT('',(-6.585,3.960927848032,-1.759849654647)); +#109356 = CARTESIAN_POINT('',(-6.585,4.042214804583,-1.789112962908)); +#109357 = CARTESIAN_POINT('',(-6.585,4.132073828292,-1.789112962908)); +#109358 = ORIENTED_EDGE('',*,*,#108861,.F.); +#109359 = ORIENTED_EDGE('',*,*,#107481,.T.); +#109360 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#109361,#109362) + ,(#109363,#109364) + ,(#109365,#109366) + ,(#109367,#109368 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.479552306041E-02, + 0.952813596635),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#109361 = CARTESIAN_POINT('',(-6.575,3.888212960333,-1.701323039491)); +#109362 = CARTESIAN_POINT('',(-6.585,3.888212960333,-1.701323039491)); +#109363 = CARTESIAN_POINT('',(-6.575,3.960927859637,-1.759849663422)); +#109364 = CARTESIAN_POINT('',(-6.585,3.960927859637,-1.759849663422)); +#109365 = CARTESIAN_POINT('',(-6.575,4.042510351289,-1.78911296267)); +#109366 = CARTESIAN_POINT('',(-6.585,4.042510351289,-1.78911296267)); +#109367 = CARTESIAN_POINT('',(-6.575,4.132073827204,-1.789112962907)); +#109368 = CARTESIAN_POINT('',(-6.585,4.132073827204,-1.789112962907)); +#109369 = ADVANCED_FACE('',(#109370),#109390,.T.); +#109370 = FACE_BOUND('',#109371,.T.); +#109371 = EDGE_LOOP('',(#109372,#109373,#109374,#109375,#109376,#109377, + #109378,#109379,#109380,#109381,#109382,#109383,#109384,#109385, + #109386,#109387,#109388,#109389)); +#109372 = ORIENTED_EDGE('',*,*,#109352,.T.); +#109373 = ORIENTED_EDGE('',*,*,#109323,.T.); +#109374 = ORIENTED_EDGE('',*,*,#109294,.T.); +#109375 = ORIENTED_EDGE('',*,*,#109265,.T.); +#109376 = ORIENTED_EDGE('',*,*,#109236,.T.); +#109377 = ORIENTED_EDGE('',*,*,#109207,.T.); +#109378 = ORIENTED_EDGE('',*,*,#109178,.T.); +#109379 = ORIENTED_EDGE('',*,*,#109154,.T.); +#109380 = ORIENTED_EDGE('',*,*,#109125,.T.); +#109381 = ORIENTED_EDGE('',*,*,#109096,.T.); +#109382 = ORIENTED_EDGE('',*,*,#109067,.T.); +#109383 = ORIENTED_EDGE('',*,*,#109038,.T.); +#109384 = ORIENTED_EDGE('',*,*,#109009,.T.); +#109385 = ORIENTED_EDGE('',*,*,#108980,.T.); +#109386 = ORIENTED_EDGE('',*,*,#108951,.T.); +#109387 = ORIENTED_EDGE('',*,*,#108922,.T.); +#109388 = ORIENTED_EDGE('',*,*,#108898,.T.); +#109389 = ORIENTED_EDGE('',*,*,#108869,.T.); +#109390 = PLANE('',#109391); +#109391 = AXIS2_PLACEMENT_3D('',#109392,#109393,#109394); +#109392 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#109393 = DIRECTION('',(-1.,0.,0.)); +#109394 = DIRECTION('',(0.,0.,1.)); +#109395 = ADVANCED_FACE('',(#109396),#109494,.T.); +#109396 = FACE_BOUND('',#109397,.T.); +#109397 = EDGE_LOOP('',(#109398,#109408,#109416,#109424,#109432,#109440, + #109448,#109456,#109464,#109472,#109480,#109488)); +#109398 = ORIENTED_EDGE('',*,*,#109399,.T.); +#109399 = EDGE_CURVE('',#109400,#109402,#109404,.T.); +#109400 = VERTEX_POINT('',#109401); +#109401 = CARTESIAN_POINT('',(-6.585,2.754038414073,-1.9106)); +#109402 = VERTEX_POINT('',#109403); +#109403 = CARTESIAN_POINT('',(-6.585,2.665361687255,-1.488499029851)); +#109404 = LINE('',#109405,#109406); +#109405 = CARTESIAN_POINT('',(-6.585,2.754038414073,-1.9106)); +#109406 = VECTOR('',#109407,1.); +#109407 = DIRECTION('',(0.,-0.205596114881,0.978636928358)); +#109408 = ORIENTED_EDGE('',*,*,#109409,.T.); +#109409 = EDGE_CURVE('',#109402,#109410,#109412,.T.); +#109410 = VERTEX_POINT('',#109411); +#109411 = CARTESIAN_POINT('',(-6.585,2.393124255252,-1.251732342815)); +#109412 = LINE('',#109413,#109414); +#109413 = CARTESIAN_POINT('',(-6.585,2.665361687255,-1.488499029851)); +#109414 = VECTOR('',#109415,1.); +#109415 = DIRECTION('',(0.,-0.754552702119,0.656239453039)); +#109416 = ORIENTED_EDGE('',*,*,#109417,.T.); +#109417 = EDGE_CURVE('',#109410,#109418,#109420,.T.); +#109418 = VERTEX_POINT('',#109419); +#109419 = CARTESIAN_POINT('',(-6.585,2.018022092891,-1.9106)); +#109420 = LINE('',#109421,#109422); +#109421 = CARTESIAN_POINT('',(-6.585,2.393124255252,-1.251732342815)); +#109422 = VECTOR('',#109423,1.); +#109423 = DIRECTION('',(0.,-0.49475259637,-0.869033870678)); +#109424 = ORIENTED_EDGE('',*,*,#109425,.T.); +#109425 = EDGE_CURVE('',#109418,#109426,#109428,.T.); +#109426 = VERTEX_POINT('',#109427); +#109427 = CARTESIAN_POINT('',(-6.585,1.823820075107,-1.9106)); +#109428 = LINE('',#109429,#109430); +#109429 = CARTESIAN_POINT('',(-6.585,2.018022092891,-1.9106)); +#109430 = VECTOR('',#109431,1.); +#109431 = DIRECTION('',(0.,-1.,0.)); +#109432 = ORIENTED_EDGE('',*,*,#109433,.T.); +#109433 = EDGE_CURVE('',#109426,#109434,#109436,.T.); +#109434 = VERTEX_POINT('',#109435); +#109435 = CARTESIAN_POINT('',(-6.585,2.266316649032,-1.139999722815)); +#109436 = LINE('',#109437,#109438); +#109437 = CARTESIAN_POINT('',(-6.585,1.823820075107,-1.9106)); +#109438 = VECTOR('',#109439,1.); +#109439 = DIRECTION('',(0.,0.497964796055,0.867197245089)); +#109440 = ORIENTED_EDGE('',*,*,#109441,.T.); +#109441 = EDGE_CURVE('',#109434,#109442,#109444,.T.); +#109442 = VERTEX_POINT('',#109443); +#109443 = CARTESIAN_POINT('',(-6.585,1.662428435397,-0.6106)); +#109444 = LINE('',#109445,#109446); +#109445 = CARTESIAN_POINT('',(-6.585,2.266316649032,-1.139999722815)); +#109446 = VECTOR('',#109447,1.); +#109447 = DIRECTION('',(0.,-0.751960796865,0.659207827607)); +#109448 = ORIENTED_EDGE('',*,*,#109449,.T.); +#109449 = EDGE_CURVE('',#109442,#109450,#109452,.T.); +#109450 = VERTEX_POINT('',#109451); +#109451 = CARTESIAN_POINT('',(-6.585,1.907176145625,-0.6106)); +#109452 = LINE('',#109453,#109454); +#109453 = CARTESIAN_POINT('',(-6.585,1.662428435397,-0.6106)); +#109454 = VECTOR('',#109455,1.); +#109455 = DIRECTION('',(0.,1.,0.)); +#109456 = ORIENTED_EDGE('',*,*,#109457,.T.); +#109457 = EDGE_CURVE('',#109450,#109458,#109460,.T.); +#109458 = VERTEX_POINT('',#109459); +#109459 = CARTESIAN_POINT('',(-6.585,2.613042494369,-1.23665727911)); +#109460 = LINE('',#109461,#109462); +#109461 = CARTESIAN_POINT('',(-6.585,1.907176145625,-0.6106)); +#109462 = VECTOR('',#109463,1.); +#109463 = DIRECTION('',(0.,0.748134871138,-0.6635466936)); +#109464 = ORIENTED_EDGE('',*,*,#109465,.T.); +#109465 = EDGE_CURVE('',#109458,#109466,#109468,.T.); +#109466 = VERTEX_POINT('',#109467); +#109467 = CARTESIAN_POINT('',(-6.585,2.482687732291,-0.6106)); +#109468 = LINE('',#109469,#109470); +#109469 = CARTESIAN_POINT('',(-6.585,2.613042494369,-1.23665727911)); +#109470 = VECTOR('',#109471,1.); +#109471 = DIRECTION('',(0.,-0.203843591309,0.979003467962)); +#109472 = ORIENTED_EDGE('',*,*,#109473,.T.); +#109473 = EDGE_CURVE('',#109466,#109474,#109476,.T.); +#109474 = VERTEX_POINT('',#109475); +#109475 = CARTESIAN_POINT('',(-6.585,2.65649403007,-0.6106)); +#109476 = LINE('',#109477,#109478); +#109477 = CARTESIAN_POINT('',(-6.585,2.482687732291,-0.6106)); +#109478 = VECTOR('',#109479,1.); +#109479 = DIRECTION('',(0.,1.,0.)); +#109480 = ORIENTED_EDGE('',*,*,#109481,.T.); +#109481 = EDGE_CURVE('',#109474,#109482,#109484,.T.); +#109482 = VERTEX_POINT('',#109483); +#109483 = CARTESIAN_POINT('',(-6.585,2.92784455688,-1.9106)); +#109484 = LINE('',#109485,#109486); +#109485 = CARTESIAN_POINT('',(-6.585,2.65649403007,-0.6106)); +#109486 = VECTOR('',#109487,1.); +#109487 = DIRECTION('',(0.,0.204327487018,-0.978902588641)); +#109488 = ORIENTED_EDGE('',*,*,#109489,.T.); +#109489 = EDGE_CURVE('',#109482,#109400,#109490,.T.); +#109490 = LINE('',#109491,#109492); +#109491 = CARTESIAN_POINT('',(-6.585,2.92784455688,-1.9106)); +#109492 = VECTOR('',#109493,1.); +#109493 = DIRECTION('',(0.,-1.,0.)); +#109494 = PLANE('',#109495); +#109495 = AXIS2_PLACEMENT_3D('',#109496,#109497,#109498); +#109496 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#109497 = DIRECTION('',(-1.,0.,0.)); +#109498 = DIRECTION('',(0.,0.,1.)); +#109499 = ADVANCED_FACE('',(#109500),#109726,.T.); +#109500 = FACE_BOUND('',#109501,.T.); +#109501 = EDGE_LOOP('',(#109502,#109512,#109520,#109528,#109536,#109544, + #109552,#109560,#109568,#109576,#109584,#109592,#109600,#109608, + #109616,#109624,#109632,#109640,#109648,#109656,#109664,#109672, + #109680,#109688,#109696,#109704,#109712,#109720)); +#109502 = ORIENTED_EDGE('',*,*,#109503,.T.); +#109503 = EDGE_CURVE('',#109504,#109506,#109508,.T.); +#109504 = VERTEX_POINT('',#109505); +#109505 = CARTESIAN_POINT('',(-6.585,-1.3412,-1.8495)); +#109506 = VERTEX_POINT('',#109507); +#109507 = CARTESIAN_POINT('',(-6.585,-2.3162,-1.8495)); +#109508 = LINE('',#109509,#109510); +#109509 = CARTESIAN_POINT('',(-6.585,-1.3412,-1.8495)); +#109510 = VECTOR('',#109511,1.); +#109511 = DIRECTION('',(0.,-1.,0.)); +#109512 = ORIENTED_EDGE('',*,*,#109513,.T.); +#109513 = EDGE_CURVE('',#109506,#109514,#109516,.T.); +#109514 = VERTEX_POINT('',#109515); +#109515 = CARTESIAN_POINT('',(-6.585,-2.3162,-1.711202124774)); +#109516 = LINE('',#109517,#109518); +#109517 = CARTESIAN_POINT('',(-6.585,-2.3162,-1.8495)); +#109518 = VECTOR('',#109519,1.); +#109519 = DIRECTION('',(0.,0.,1.)); +#109520 = ORIENTED_EDGE('',*,*,#109521,.T.); +#109521 = EDGE_CURVE('',#109514,#109522,#109524,.T.); +#109522 = VERTEX_POINT('',#109523); +#109523 = CARTESIAN_POINT('',(-6.585,-1.557866673124,-1.711202124774)); +#109524 = LINE('',#109525,#109526); +#109525 = CARTESIAN_POINT('',(-6.585,-2.3162,-1.711202124774)); +#109526 = VECTOR('',#109527,1.); +#109527 = DIRECTION('',(0.,1.,0.)); +#109528 = ORIENTED_EDGE('',*,*,#109529,.T.); +#109529 = EDGE_CURVE('',#109522,#109530,#109532,.T.); +#109530 = VERTEX_POINT('',#109531); +#109531 = CARTESIAN_POINT('',(-6.585,-2.23495,-1.102691500902)); +#109532 = LINE('',#109533,#109534); +#109533 = CARTESIAN_POINT('',(-6.585,-1.557866673124,-1.711202124774)); +#109534 = VECTOR('',#109535,1.); +#109535 = DIRECTION('',(0.,-0.743766087257,0.668439980437)); +#109536 = ORIENTED_EDGE('',*,*,#109537,.T.); +#109537 = EDGE_CURVE('',#109530,#109538,#109540,.T.); +#109538 = VERTEX_POINT('',#109539); +#109539 = CARTESIAN_POINT('',(-6.585,-2.289116692495,-1.01971278739)); +#109540 = LINE('',#109541,#109542); +#109541 = CARTESIAN_POINT('',(-6.585,-2.23495,-1.102691500902)); +#109542 = VECTOR('',#109543,1.); +#109543 = DIRECTION('',(0.,-0.546622729396,0.837379001234)); +#109544 = ORIENTED_EDGE('',*,*,#109545,.T.); +#109545 = EDGE_CURVE('',#109538,#109546,#109548,.T.); +#109546 = VERTEX_POINT('',#109547); +#109547 = CARTESIAN_POINT('',(-6.585,-2.3162,-0.909074502706)); +#109548 = LINE('',#109549,#109550); +#109549 = CARTESIAN_POINT('',(-6.585,-2.289116692495,-1.01971278739)); +#109550 = VECTOR('',#109551,1.); +#109551 = DIRECTION('',(0.,-0.237771138531,0.971321206235)); +#109552 = ORIENTED_EDGE('',*,*,#109553,.T.); +#109553 = EDGE_CURVE('',#109546,#109554,#109556,.T.); +#109554 = VERTEX_POINT('',#109555); +#109555 = CARTESIAN_POINT('',(-6.585,-2.3162,-0.853755282879)); +#109556 = LINE('',#109557,#109558); +#109557 = CARTESIAN_POINT('',(-6.585,-2.3162,-0.909074502706)); +#109558 = VECTOR('',#109559,1.); +#109559 = DIRECTION('',(0.,0.,1.)); +#109560 = ORIENTED_EDGE('',*,*,#109561,.T.); +#109561 = EDGE_CURVE('',#109554,#109562,#109564,.T.); +#109562 = VERTEX_POINT('',#109563); +#109563 = CARTESIAN_POINT('',(-6.585,-2.289116692495,-0.743116998196)); +#109564 = LINE('',#109565,#109566); +#109565 = CARTESIAN_POINT('',(-6.585,-2.3162,-0.853755282879)); +#109566 = VECTOR('',#109567,1.); +#109567 = DIRECTION('',(0.,0.237771138531,0.971321206235)); +#109568 = ORIENTED_EDGE('',*,*,#109569,.T.); +#109569 = EDGE_CURVE('',#109562,#109570,#109572,.T.); +#109570 = VERTEX_POINT('',#109571); +#109571 = CARTESIAN_POINT('',(-6.585,-2.180783307505,-0.632478713512)); +#109572 = LINE('',#109573,#109574); +#109573 = CARTESIAN_POINT('',(-6.585,-2.289116692495,-0.743116998196)); +#109574 = VECTOR('',#109575,1.); +#109575 = DIRECTION('',(0.,0.699625005502,0.714510218035)); +#109576 = ORIENTED_EDGE('',*,*,#109577,.T.); +#109577 = EDGE_CURVE('',#109570,#109578,#109580,.T.); +#109578 = VERTEX_POINT('',#109579); +#109579 = CARTESIAN_POINT('',(-6.585,-2.07245,-0.577159571171)); +#109580 = LINE('',#109581,#109582); +#109581 = CARTESIAN_POINT('',(-6.585,-2.180783307505,-0.632478713512)); +#109582 = VECTOR('',#109583,1.); +#109583 = DIRECTION('',(0.,0.89060524295,0.45477719955)); +#109584 = ORIENTED_EDGE('',*,*,#109585,.T.); +#109585 = EDGE_CURVE('',#109578,#109586,#109588,.T.); +#109586 = VERTEX_POINT('',#109587); +#109587 = CARTESIAN_POINT('',(-6.585,-1.90995,-0.5495)); +#109588 = LINE('',#109589,#109590); +#109589 = CARTESIAN_POINT('',(-6.585,-2.07245,-0.577159571171)); +#109590 = VECTOR('',#109591,1.); +#109591 = DIRECTION('',(0.,0.985821173093,0.167799328608)); +#109592 = ORIENTED_EDGE('',*,*,#109593,.T.); +#109593 = EDGE_CURVE('',#109586,#109594,#109596,.T.); +#109594 = VERTEX_POINT('',#109595); +#109595 = CARTESIAN_POINT('',(-6.585,-1.801616653752,-0.5495)); +#109596 = LINE('',#109597,#109598); +#109597 = CARTESIAN_POINT('',(-6.585,-1.90995,-0.5495)); +#109598 = VECTOR('',#109599,1.); +#109599 = DIRECTION('',(0.,1.,0.)); +#109600 = ORIENTED_EDGE('',*,*,#109601,.T.); +#109601 = EDGE_CURVE('',#109594,#109602,#109604,.T.); +#109602 = VERTEX_POINT('',#109603); +#109603 = CARTESIAN_POINT('',(-6.585,-1.612033326876,-0.577159571171)); +#109604 = LINE('',#109605,#109606); +#109605 = CARTESIAN_POINT('',(-6.585,-1.801616653752,-0.5495)); +#109606 = VECTOR('',#109607,1.); +#109607 = DIRECTION('',(0.,0.989524033317,-0.144368235729)); +#109608 = ORIENTED_EDGE('',*,*,#109609,.T.); +#109609 = EDGE_CURVE('',#109602,#109610,#109612,.T.); +#109610 = VERTEX_POINT('',#109611); +#109611 = CARTESIAN_POINT('',(-6.585,-1.5037,-0.632478713512)); +#109612 = LINE('',#109613,#109614); +#109613 = CARTESIAN_POINT('',(-6.585,-1.612033326876,-0.577159571171)); +#109614 = VECTOR('',#109615,1.); +#109615 = DIRECTION('',(0.,0.890605275887,-0.454777135048)); +#109616 = ORIENTED_EDGE('',*,*,#109617,.T.); +#109617 = EDGE_CURVE('',#109610,#109618,#109620,.T.); +#109618 = VERTEX_POINT('',#109619); +#109619 = CARTESIAN_POINT('',(-6.585,-1.395366668281,-0.743116998196)); +#109620 = LINE('',#109621,#109622); +#109621 = CARTESIAN_POINT('',(-6.585,-1.5037,-0.632478713512)); +#109622 = VECTOR('',#109623,1.); +#109623 = DIRECTION('',(0.,0.699624829865,-0.714510390013)); +#109624 = ORIENTED_EDGE('',*,*,#109625,.T.); +#109625 = EDGE_CURVE('',#109618,#109626,#109628,.T.); +#109626 = VERTEX_POINT('',#109627); +#109627 = CARTESIAN_POINT('',(-6.585,-1.36828333414,-0.853755282879)); +#109628 = LINE('',#109629,#109630); +#109629 = CARTESIAN_POINT('',(-6.585,-1.395366668281,-0.743116998196)); +#109630 = VECTOR('',#109631,1.); +#109631 = DIRECTION('',(0.,0.237771359153,-0.971321152228)); +#109632 = ORIENTED_EDGE('',*,*,#109633,.T.); +#109633 = EDGE_CURVE('',#109626,#109634,#109636,.T.); +#109634 = VERTEX_POINT('',#109635); +#109635 = CARTESIAN_POINT('',(-6.585,-1.5037,-0.853755282879)); +#109636 = LINE('',#109637,#109638); +#109637 = CARTESIAN_POINT('',(-6.585,-1.36828333414,-0.853755282879)); +#109638 = VECTOR('',#109639,1.); +#109639 = DIRECTION('',(0.,-1.,0.)); +#109640 = ORIENTED_EDGE('',*,*,#109641,.T.); +#109641 = EDGE_CURVE('',#109634,#109642,#109644,.T.); +#109642 = VERTEX_POINT('',#109643); +#109643 = CARTESIAN_POINT('',(-6.585,-1.557866673124,-0.770776569367)); +#109644 = LINE('',#109645,#109646); +#109645 = CARTESIAN_POINT('',(-6.585,-1.5037,-0.853755282879)); +#109646 = VECTOR('',#109647,1.); +#109647 = DIRECTION('',(0.,-0.546622592319,0.837379090715)); +#109648 = ORIENTED_EDGE('',*,*,#109649,.T.); +#109649 = EDGE_CURVE('',#109642,#109650,#109652,.T.); +#109650 = VERTEX_POINT('',#109651); +#109651 = CARTESIAN_POINT('',(-6.585,-1.639116673124,-0.715457427025)); +#109652 = LINE('',#109653,#109654); +#109653 = CARTESIAN_POINT('',(-6.585,-1.557866673124,-0.770776569367)); +#109654 = VECTOR('',#109655,1.); +#109655 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#109656 = ORIENTED_EDGE('',*,*,#109657,.T.); +#109657 = EDGE_CURVE('',#109650,#109658,#109660,.T.); +#109658 = VERTEX_POINT('',#109659); +#109659 = CARTESIAN_POINT('',(-6.585,-1.774533346248,-0.687797855854)); +#109660 = LINE('',#109661,#109662); +#109661 = CARTESIAN_POINT('',(-6.585,-1.639116673124,-0.715457427025)); +#109662 = VECTOR('',#109663,1.); +#109663 = DIRECTION('',(0.,-0.979770711149,0.200123345899)); +#109664 = ORIENTED_EDGE('',*,*,#109665,.T.); +#109665 = EDGE_CURVE('',#109658,#109666,#109668,.T.); +#109666 = VERTEX_POINT('',#109667); +#109667 = CARTESIAN_POINT('',(-6.585,-1.882866653752,-0.687797855854)); +#109668 = LINE('',#109669,#109670); +#109669 = CARTESIAN_POINT('',(-6.585,-1.774533346248,-0.687797855854)); +#109670 = VECTOR('',#109671,1.); +#109671 = DIRECTION('',(0.,-1.,0.)); +#109672 = ORIENTED_EDGE('',*,*,#109673,.T.); +#109673 = EDGE_CURVE('',#109666,#109674,#109676,.T.); +#109674 = VERTEX_POINT('',#109675); +#109675 = CARTESIAN_POINT('',(-6.585,-2.018283307505,-0.715457427025)); +#109676 = LINE('',#109677,#109678); +#109677 = CARTESIAN_POINT('',(-6.585,-1.882866653752,-0.687797855854)); +#109678 = VECTOR('',#109679,1.); +#109679 = DIRECTION('',(0.,-0.979770705536,-0.200123373381)); +#109680 = ORIENTED_EDGE('',*,*,#109681,.T.); +#109681 = EDGE_CURVE('',#109674,#109682,#109684,.T.); +#109682 = VERTEX_POINT('',#109683); +#109683 = CARTESIAN_POINT('',(-6.585,-2.099533307505,-0.770776569367)); +#109684 = LINE('',#109685,#109686); +#109685 = CARTESIAN_POINT('',(-6.585,-2.018283307505,-0.715457427025)); +#109686 = VECTOR('',#109687,1.); +#109687 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#109688 = ORIENTED_EDGE('',*,*,#109689,.T.); +#109689 = EDGE_CURVE('',#109682,#109690,#109692,.T.); +#109690 = VERTEX_POINT('',#109691); +#109691 = CARTESIAN_POINT('',(-6.585,-2.1537,-0.853755282879)); +#109692 = LINE('',#109693,#109694); +#109693 = CARTESIAN_POINT('',(-6.585,-2.099533307505,-0.770776569367)); +#109694 = VECTOR('',#109695,1.); +#109695 = DIRECTION('',(0.,-0.546622729396,-0.837379001234)); +#109696 = ORIENTED_EDGE('',*,*,#109697,.T.); +#109697 = EDGE_CURVE('',#109690,#109698,#109700,.T.); +#109698 = VERTEX_POINT('',#109699); +#109699 = CARTESIAN_POINT('',(-6.585,-2.1537,-0.909074502706)); +#109700 = LINE('',#109701,#109702); +#109701 = CARTESIAN_POINT('',(-6.585,-2.1537,-0.853755282879)); +#109702 = VECTOR('',#109703,1.); +#109703 = DIRECTION('',(0.,0.,-1.)); +#109704 = ORIENTED_EDGE('',*,*,#109705,.T.); +#109705 = EDGE_CURVE('',#109698,#109706,#109708,.T.); +#109706 = VERTEX_POINT('',#109707); +#109707 = CARTESIAN_POINT('',(-6.585,-2.099533307505,-1.01971278739)); +#109708 = LINE('',#109709,#109710); +#109709 = CARTESIAN_POINT('',(-6.585,-2.1537,-0.909074502706)); +#109710 = VECTOR('',#109711,1.); +#109711 = DIRECTION('',(0.,0.439713664957,-0.898138014367)); +#109712 = ORIENTED_EDGE('',*,*,#109713,.T.); +#109713 = EDGE_CURVE('',#109706,#109714,#109716,.T.); +#109714 = VERTEX_POINT('',#109715); +#109715 = CARTESIAN_POINT('',(-6.585,-1.3412,-1.711202124774)); +#109716 = LINE('',#109717,#109718); +#109717 = CARTESIAN_POINT('',(-6.585,-2.099533307505,-1.01971278739)); +#109718 = VECTOR('',#109719,1.); +#109719 = DIRECTION('',(0.,0.738922954902,-0.673789927736)); +#109720 = ORIENTED_EDGE('',*,*,#109721,.T.); +#109721 = EDGE_CURVE('',#109714,#109504,#109722,.T.); +#109722 = LINE('',#109723,#109724); +#109723 = CARTESIAN_POINT('',(-6.585,-1.3412,-1.711202124774)); +#109724 = VECTOR('',#109725,1.); +#109725 = DIRECTION('',(0.,0.,-1.)); +#109726 = PLANE('',#109727); +#109727 = AXIS2_PLACEMENT_3D('',#109728,#109729,#109730); +#109728 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#109729 = DIRECTION('',(-1.,0.,0.)); +#109730 = DIRECTION('',(0.,0.,1.)); +#109731 = ADVANCED_FACE('',(#109732),#109790,.T.); +#109732 = FACE_BOUND('',#109733,.T.); +#109733 = EDGE_LOOP('',(#109734,#109744,#109752,#109760,#109768,#109776, + #109784)); +#109734 = ORIENTED_EDGE('',*,*,#109735,.T.); +#109735 = EDGE_CURVE('',#109736,#109738,#109740,.T.); +#109736 = VERTEX_POINT('',#109737); +#109737 = CARTESIAN_POINT('',(-6.585,-2.857866615009,-0.5495)); +#109738 = VERTEX_POINT('',#109739); +#109739 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-0.5495)); +#109740 = LINE('',#109741,#109742); +#109741 = CARTESIAN_POINT('',(-6.585,-2.857866615009,-0.5495)); +#109742 = VECTOR('',#109743,1.); +#109743 = DIRECTION('',(0.,1.,0.)); +#109744 = ORIENTED_EDGE('',*,*,#109745,.T.); +#109745 = EDGE_CURVE('',#109738,#109746,#109748,.T.); +#109746 = VERTEX_POINT('',#109747); +#109747 = CARTESIAN_POINT('',(-6.585,-2.532866692495,-0.743116998196)); +#109748 = LINE('',#109749,#109750); +#109749 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-0.5495)); +#109750 = VECTOR('',#109751,1.); +#109751 = DIRECTION('',(0.,0.642871113859,-0.765974367042)); +#109752 = ORIENTED_EDGE('',*,*,#109753,.T.); +#109753 = EDGE_CURVE('',#109746,#109754,#109756,.T.); +#109754 = VERTEX_POINT('',#109755); +#109755 = CARTESIAN_POINT('',(-6.585,-2.532866692495,-0.964393645048)); +#109756 = LINE('',#109757,#109758); +#109757 = CARTESIAN_POINT('',(-6.585,-2.532866692495,-0.743116998196)); +#109758 = VECTOR('',#109759,1.); +#109759 = DIRECTION('',(0.,0.,-1.)); +#109760 = ORIENTED_EDGE('',*,*,#109761,.T.); +#109761 = EDGE_CURVE('',#109754,#109762,#109764,.T.); +#109762 = VERTEX_POINT('',#109763); +#109763 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-0.770776569367)); +#109764 = LINE('',#109765,#109766); +#109765 = CARTESIAN_POINT('',(-6.585,-2.532866692495,-0.964393645048)); +#109766 = VECTOR('',#109767,1.); +#109767 = DIRECTION('',(0.,-0.642870962909,0.765974493732)); +#109768 = ORIENTED_EDGE('',*,*,#109769,.T.); +#109769 = EDGE_CURVE('',#109762,#109770,#109772,.T.); +#109770 = VERTEX_POINT('',#109771); +#109771 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-1.8495)); +#109772 = LINE('',#109773,#109774); +#109773 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-0.770776569367)); +#109774 = VECTOR('',#109775,1.); +#109775 = DIRECTION('',(0.,0.,-1.)); +#109776 = ORIENTED_EDGE('',*,*,#109777,.T.); +#109777 = EDGE_CURVE('',#109770,#109778,#109780,.T.); +#109778 = VERTEX_POINT('',#109779); +#109779 = CARTESIAN_POINT('',(-6.585,-2.857866615009,-1.8495)); +#109780 = LINE('',#109781,#109782); +#109781 = CARTESIAN_POINT('',(-6.585,-2.695366615009,-1.8495)); +#109782 = VECTOR('',#109783,1.); +#109783 = DIRECTION('',(0.,-1.,0.)); +#109784 = ORIENTED_EDGE('',*,*,#109785,.T.); +#109785 = EDGE_CURVE('',#109778,#109736,#109786,.T.); +#109786 = LINE('',#109787,#109788); +#109787 = CARTESIAN_POINT('',(-6.585,-2.857866615009,-1.8495)); +#109788 = VECTOR('',#109789,1.); +#109789 = DIRECTION('',(0.,0.,1.)); +#109790 = PLANE('',#109791); +#109791 = AXIS2_PLACEMENT_3D('',#109792,#109793,#109794); +#109792 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#109793 = DIRECTION('',(-1.,0.,0.)); +#109794 = DIRECTION('',(0.,0.,1.)); +#109795 = ADVANCED_FACE('',(#109796,#110006),#110152,.T.); +#109796 = FACE_BOUND('',#109797,.T.); +#109797 = EDGE_LOOP('',(#109798,#109808,#109816,#109824,#109832,#109840, + #109848,#109856,#109864,#109872,#109880,#109888,#109896,#109904, + #109912,#109920,#109928,#109936,#109944,#109952,#109960,#109968, + #109976,#109984,#109992,#110000)); +#109798 = ORIENTED_EDGE('',*,*,#109799,.T.); +#109799 = EDGE_CURVE('',#109800,#109802,#109804,.T.); +#109800 = VERTEX_POINT('',#109801); +#109801 = CARTESIAN_POINT('',(-6.585,-3.074533384991,-1.323968070269)); +#109802 = VERTEX_POINT('',#109803); +#109803 = CARTESIAN_POINT('',(-6.585,-3.101616615009,-1.462265964866)); +#109804 = LINE('',#109805,#109806); +#109805 = CARTESIAN_POINT('',(-6.585,-3.074533384991,-1.323968070269)); +#109806 = VECTOR('',#109807,1.); +#109807 = DIRECTION('',(0.,-0.192182095523,-0.981359282913)); +#109808 = ORIENTED_EDGE('',*,*,#109809,.T.); +#109809 = EDGE_CURVE('',#109802,#109810,#109812,.T.); +#109810 = VERTEX_POINT('',#109811); +#109811 = CARTESIAN_POINT('',(-6.585,-3.1287,-1.545244678378)); +#109812 = LINE('',#109813,#109814); +#109813 = CARTESIAN_POINT('',(-6.585,-3.101616615009,-1.462265964866)); +#109814 = VECTOR('',#109815,1.); +#109815 = DIRECTION('',(0.,-0.310280599805,-0.950645017546)); +#109816 = ORIENTED_EDGE('',*,*,#109817,.T.); +#109817 = EDGE_CURVE('',#109810,#109818,#109820,.T.); +#109818 = VERTEX_POINT('',#109819); +#109819 = CARTESIAN_POINT('',(-6.585,-3.182866615009,-1.655882982433)); +#109820 = LINE('',#109821,#109822); +#109821 = CARTESIAN_POINT('',(-6.585,-3.1287,-1.545244678378)); +#109822 = VECTOR('',#109823,1.); +#109823 = DIRECTION('',(0.,-0.439713095457,-0.898138293184)); +#109824 = ORIENTED_EDGE('',*,*,#109825,.T.); +#109825 = EDGE_CURVE('',#109818,#109826,#109828,.T.); +#109826 = VERTEX_POINT('',#109827); +#109827 = CARTESIAN_POINT('',(-6.585,-3.264116615009,-1.738861705631)); +#109828 = LINE('',#109829,#109830); +#109829 = CARTESIAN_POINT('',(-6.585,-3.182866615009,-1.655882982433)); +#109830 = VECTOR('',#109831,1.); +#109831 = DIRECTION('',(0.,-0.699624793495,-0.714510425625)); +#109832 = ORIENTED_EDGE('',*,*,#109833,.T.); +#109833 = EDGE_CURVE('',#109826,#109834,#109836,.T.); +#109834 = VERTEX_POINT('',#109835); +#109835 = CARTESIAN_POINT('',(-6.585,-3.399533384991,-1.821840426408)); +#109836 = LINE('',#109837,#109838); +#109837 = CARTESIAN_POINT('',(-6.585,-3.264116615009,-1.738861705631)); +#109838 = VECTOR('',#109839,1.); +#109839 = DIRECTION('',(0.,-0.852653579815,-0.522476672043)); +#109840 = ORIENTED_EDGE('',*,*,#109841,.T.); +#109841 = EDGE_CURVE('',#109834,#109842,#109844,.T.); +#109842 = VERTEX_POINT('',#109843); +#109843 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-1.8495)); +#109844 = LINE('',#109845,#109846); +#109845 = CARTESIAN_POINT('',(-6.585,-3.399533384991,-1.821840426408)); +#109846 = VECTOR('',#109847,1.); +#109847 = DIRECTION('',(0.,-0.985821170663,-0.167799342885)); +#109848 = ORIENTED_EDGE('',*,*,#109849,.T.); +#109849 = EDGE_CURVE('',#109842,#109850,#109852,.T.); +#109850 = VERTEX_POINT('',#109851); +#109851 = CARTESIAN_POINT('',(-6.585,-3.724533384991,-1.821840426408)); +#109852 = LINE('',#109853,#109854); +#109853 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-1.8495)); +#109854 = VECTOR('',#109855,1.); +#109855 = DIRECTION('',(0.,-0.985821170663,0.167799342885)); +#109856 = ORIENTED_EDGE('',*,*,#109857,.T.); +#109857 = EDGE_CURVE('',#109850,#109858,#109860,.T.); +#109858 = VERTEX_POINT('',#109859); +#109859 = CARTESIAN_POINT('',(-6.585,-3.85995,-1.738861705631)); +#109860 = LINE('',#109861,#109862); +#109861 = CARTESIAN_POINT('',(-6.585,-3.724533384991,-1.821840426408)); +#109862 = VECTOR('',#109863,1.); +#109863 = DIRECTION('',(0.,-0.852653313443,0.522477106747)); +#109864 = ORIENTED_EDGE('',*,*,#109865,.T.); +#109865 = EDGE_CURVE('',#109858,#109866,#109868,.T.); +#109866 = VERTEX_POINT('',#109867); +#109867 = CARTESIAN_POINT('',(-6.585,-3.9412,-1.655882982433)); +#109868 = LINE('',#109869,#109870); +#109869 = CARTESIAN_POINT('',(-6.585,-3.85995,-1.738861705631)); +#109870 = VECTOR('',#109871,1.); +#109871 = DIRECTION('',(0.,-0.699624793495,0.714510425625)); +#109872 = ORIENTED_EDGE('',*,*,#109873,.T.); +#109873 = EDGE_CURVE('',#109866,#109874,#109876,.T.); +#109874 = VERTEX_POINT('',#109875); +#109875 = CARTESIAN_POINT('',(-6.585,-3.995366769981,-1.545244678378)); +#109876 = LINE('',#109877,#109878); +#109877 = CARTESIAN_POINT('',(-6.585,-3.9412,-1.655882982433)); +#109878 = VECTOR('',#109879,1.); +#109879 = DIRECTION('',(0.,-0.439714110249,0.898137796358)); +#109880 = ORIENTED_EDGE('',*,*,#109881,.T.); +#109881 = EDGE_CURVE('',#109874,#109882,#109884,.T.); +#109882 = VERTEX_POINT('',#109883); +#109883 = CARTESIAN_POINT('',(-6.585,-4.02245,-1.462265964866)); +#109884 = LINE('',#109885,#109886); +#109885 = CARTESIAN_POINT('',(-6.585,-3.995366769981,-1.545244678378)); +#109886 = VECTOR('',#109887,1.); +#109887 = DIRECTION('',(0.,-0.310278995296,0.950645541239)); +#109888 = ORIENTED_EDGE('',*,*,#109889,.T.); +#109889 = EDGE_CURVE('',#109882,#109890,#109892,.T.); +#109890 = VERTEX_POINT('',#109891); +#109891 = CARTESIAN_POINT('',(-6.585,-4.049533230019,-1.323968070269)); +#109892 = LINE('',#109893,#109894); +#109893 = CARTESIAN_POINT('',(-6.585,-4.02245,-1.462265964866)); +#109894 = VECTOR('',#109895,1.); +#109895 = DIRECTION('',(0.,-0.192182095523,0.981359282913)); +#109896 = ORIENTED_EDGE('',*,*,#109897,.T.); +#109897 = EDGE_CURVE('',#109890,#109898,#109900,.T.); +#109898 = VERTEX_POINT('',#109899); +#109899 = CARTESIAN_POINT('',(-6.585,-4.049533230019,-1.075031929731)); +#109900 = LINE('',#109901,#109902); +#109901 = CARTESIAN_POINT('',(-6.585,-4.049533230019,-1.323968070269)); +#109902 = VECTOR('',#109903,1.); +#109903 = DIRECTION('',(0.,0.,1.)); +#109904 = ORIENTED_EDGE('',*,*,#109905,.T.); +#109905 = EDGE_CURVE('',#109898,#109906,#109908,.T.); +#109906 = VERTEX_POINT('',#109907); +#109907 = CARTESIAN_POINT('',(-6.585,-4.02245,-0.936734073877)); +#109908 = LINE('',#109909,#109910); +#109909 = CARTESIAN_POINT('',(-6.585,-4.049533230019,-1.075031929731)); +#109910 = VECTOR('',#109911,1.); +#109911 = DIRECTION('',(0.,0.192182147373,0.98135927276)); +#109912 = ORIENTED_EDGE('',*,*,#109913,.T.); +#109913 = EDGE_CURVE('',#109906,#109914,#109916,.T.); +#109914 = VERTEX_POINT('',#109915); +#109915 = CARTESIAN_POINT('',(-6.585,-3.995366769981,-0.853755282879)); +#109916 = LINE('',#109917,#109918); +#109917 = CARTESIAN_POINT('',(-6.585,-4.02245,-0.936734073877)); +#109918 = VECTOR('',#109919,1.); +#109919 = DIRECTION('',(0.,0.31027873345,0.950645626703)); +#109920 = ORIENTED_EDGE('',*,*,#109921,.T.); +#109921 = EDGE_CURVE('',#109914,#109922,#109924,.T.); +#109922 = VERTEX_POINT('',#109923); +#109923 = CARTESIAN_POINT('',(-6.585,-3.9412,-0.743116998196)); +#109924 = LINE('',#109925,#109926); +#109925 = CARTESIAN_POINT('',(-6.585,-3.995366769981,-0.853755282879)); +#109926 = VECTOR('',#109927,1.); +#109927 = DIRECTION('',(0.,0.439714172353,0.898137765954)); +#109928 = ORIENTED_EDGE('',*,*,#109929,.T.); +#109929 = EDGE_CURVE('',#109922,#109930,#109932,.T.); +#109930 = VERTEX_POINT('',#109931); +#109931 = CARTESIAN_POINT('',(-6.585,-3.85995,-0.660138284683)); +#109932 = LINE('',#109933,#109934); +#109933 = CARTESIAN_POINT('',(-6.585,-3.9412,-0.743116998196)); +#109934 = VECTOR('',#109935,1.); +#109935 = DIRECTION('',(0.,0.699624835187,0.714510384802)); +#109936 = ORIENTED_EDGE('',*,*,#109937,.T.); +#109937 = EDGE_CURVE('',#109930,#109938,#109940,.T.); +#109938 = VERTEX_POINT('',#109939); +#109939 = CARTESIAN_POINT('',(-6.585,-3.724533384991,-0.577159571171)); +#109940 = LINE('',#109941,#109942); +#109941 = CARTESIAN_POINT('',(-6.585,-3.85995,-0.660138284683)); +#109942 = VECTOR('',#109943,1.); +#109943 = DIRECTION('',(0.,0.85265333382,0.522477073493)); +#109944 = ORIENTED_EDGE('',*,*,#109945,.T.); +#109945 = EDGE_CURVE('',#109938,#109946,#109948,.T.); +#109946 = VERTEX_POINT('',#109947); +#109947 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-0.5495)); +#109948 = LINE('',#109949,#109950); +#109949 = CARTESIAN_POINT('',(-6.585,-3.724533384991,-0.577159571171)); +#109950 = VECTOR('',#109951,1.); +#109951 = DIRECTION('',(0.,0.985821173093,0.167799328608)); +#109952 = ORIENTED_EDGE('',*,*,#109953,.T.); +#109953 = EDGE_CURVE('',#109946,#109954,#109956,.T.); +#109954 = VERTEX_POINT('',#109955); +#109955 = CARTESIAN_POINT('',(-6.585,-3.399533384991,-0.577159571171)); +#109956 = LINE('',#109957,#109958); +#109957 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-0.5495)); +#109958 = VECTOR('',#109959,1.); +#109959 = DIRECTION('',(0.,0.985821173093,-0.167799328608)); +#109960 = ORIENTED_EDGE('',*,*,#109961,.T.); +#109961 = EDGE_CURVE('',#109954,#109962,#109964,.T.); +#109962 = VERTEX_POINT('',#109963); +#109963 = CARTESIAN_POINT('',(-6.585,-3.264116615009,-0.660138284683)); +#109964 = LINE('',#109965,#109966); +#109965 = CARTESIAN_POINT('',(-6.585,-3.399533384991,-0.577159571171)); +#109966 = VECTOR('',#109967,1.); +#109967 = DIRECTION('',(0.,0.852653600191,-0.52247663879)); +#109968 = ORIENTED_EDGE('',*,*,#109969,.T.); +#109969 = EDGE_CURVE('',#109962,#109970,#109972,.T.); +#109970 = VERTEX_POINT('',#109971); +#109971 = CARTESIAN_POINT('',(-6.585,-3.182866615009,-0.743116998196)); +#109972 = LINE('',#109973,#109974); +#109973 = CARTESIAN_POINT('',(-6.585,-3.264116615009,-0.660138284683)); +#109974 = VECTOR('',#109975,1.); +#109975 = DIRECTION('',(0.,0.699624835187,-0.714510384802)); +#109976 = ORIENTED_EDGE('',*,*,#109977,.T.); +#109977 = EDGE_CURVE('',#109970,#109978,#109980,.T.); +#109978 = VERTEX_POINT('',#109979); +#109979 = CARTESIAN_POINT('',(-6.585,-3.1287,-0.853755282879)); +#109980 = LINE('',#109981,#109982); +#109981 = CARTESIAN_POINT('',(-6.585,-3.182866615009,-0.743116998196)); +#109982 = VECTOR('',#109983,1.); +#109983 = DIRECTION('',(0.,0.43971315756,-0.898138262779)); +#109984 = ORIENTED_EDGE('',*,*,#109985,.T.); +#109985 = EDGE_CURVE('',#109978,#109986,#109988,.T.); +#109986 = VERTEX_POINT('',#109987); +#109987 = CARTESIAN_POINT('',(-6.585,-3.101616615009,-0.936734073877)); +#109988 = LINE('',#109989,#109990); +#109989 = CARTESIAN_POINT('',(-6.585,-3.1287,-0.853755282879)); +#109990 = VECTOR('',#109991,1.); +#109991 = DIRECTION('',(0.,0.310280337958,-0.95064510301)); +#109992 = ORIENTED_EDGE('',*,*,#109993,.T.); +#109993 = EDGE_CURVE('',#109986,#109994,#109996,.T.); +#109994 = VERTEX_POINT('',#109995); +#109995 = CARTESIAN_POINT('',(-6.585,-3.074533384991,-1.075031929731)); +#109996 = LINE('',#109997,#109998); +#109997 = CARTESIAN_POINT('',(-6.585,-3.101616615009,-0.936734073877)); +#109998 = VECTOR('',#109999,1.); +#109999 = DIRECTION('',(0.,0.192182147373,-0.98135927276)); +#110000 = ORIENTED_EDGE('',*,*,#110001,.T.); +#110001 = EDGE_CURVE('',#109994,#109800,#110002,.T.); +#110002 = LINE('',#110003,#110004); +#110003 = CARTESIAN_POINT('',(-6.585,-3.074533384991,-1.075031929731)); +#110004 = VECTOR('',#110005,1.); +#110005 = DIRECTION('',(0.,0.,-1.)); +#110006 = FACE_BOUND('',#110007,.T.); +#110007 = EDGE_LOOP('',(#110008,#110018,#110026,#110034,#110042,#110050, + #110058,#110066,#110074,#110082,#110090,#110098,#110106,#110114, + #110122,#110130,#110138,#110146)); +#110008 = ORIENTED_EDGE('',*,*,#110009,.T.); +#110009 = EDGE_CURVE('',#110010,#110012,#110014,.T.); +#110010 = VERTEX_POINT('',#110011); +#110011 = CARTESIAN_POINT('',(-6.585,-3.237033384991,-0.936734073877)); +#110012 = VERTEX_POINT('',#110013); +#110013 = CARTESIAN_POINT('',(-6.585,-3.345366615009,-0.770776569367)); +#110014 = LINE('',#110015,#110016); +#110015 = CARTESIAN_POINT('',(-6.585,-3.237033384991,-0.936734073877)); +#110016 = VECTOR('',#110017,1.); +#110017 = DIRECTION('',(0.,-0.546622002129,0.837379475978)); +#110018 = ORIENTED_EDGE('',*,*,#110019,.T.); +#110019 = EDGE_CURVE('',#110012,#110020,#110022,.T.); +#110020 = VERTEX_POINT('',#110021); +#110021 = CARTESIAN_POINT('',(-6.585,-3.426616615009,-0.715457427025)); +#110022 = LINE('',#110023,#110024); +#110023 = CARTESIAN_POINT('',(-6.585,-3.345366615009,-0.770776569367)); +#110024 = VECTOR('',#110025,1.); +#110025 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#110026 = ORIENTED_EDGE('',*,*,#110027,.T.); +#110027 = EDGE_CURVE('',#110020,#110028,#110030,.T.); +#110028 = VERTEX_POINT('',#110029); +#110029 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-0.687797855854)); +#110030 = LINE('',#110031,#110032); +#110031 = CARTESIAN_POINT('',(-6.585,-3.426616615009,-0.715457427025)); +#110032 = VECTOR('',#110033,1.); +#110033 = DIRECTION('',(0.,-0.979770739215,0.200123208493)); +#110034 = ORIENTED_EDGE('',*,*,#110035,.T.); +#110035 = EDGE_CURVE('',#110028,#110036,#110038,.T.); +#110036 = VERTEX_POINT('',#110037); +#110037 = CARTESIAN_POINT('',(-6.585,-3.69745,-0.715457427025)); +#110038 = LINE('',#110039,#110040); +#110039 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-0.687797855854)); +#110040 = VECTOR('',#110041,1.); +#110041 = DIRECTION('',(0.,-0.97977069431,-0.200123428343)); +#110042 = ORIENTED_EDGE('',*,*,#110043,.T.); +#110043 = EDGE_CURVE('',#110036,#110044,#110046,.T.); +#110044 = VERTEX_POINT('',#110045); +#110045 = CARTESIAN_POINT('',(-6.585,-3.7787,-0.770776569367)); +#110046 = LINE('',#110047,#110048); +#110047 = CARTESIAN_POINT('',(-6.585,-3.69745,-0.715457427025)); +#110048 = VECTOR('',#110049,1.); +#110049 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#110050 = ORIENTED_EDGE('',*,*,#110051,.T.); +#110051 = EDGE_CURVE('',#110044,#110052,#110054,.T.); +#110052 = VERTEX_POINT('',#110053); +#110053 = CARTESIAN_POINT('',(-6.585,-3.887033384991,-0.936734073877)); +#110054 = LINE('',#110055,#110056); +#110055 = CARTESIAN_POINT('',(-6.585,-3.7787,-0.770776569367)); +#110056 = VECTOR('',#110057,1.); +#110057 = DIRECTION('',(0.,-0.546622550435,-0.837379118056)); +#110058 = ORIENTED_EDGE('',*,*,#110059,.T.); +#110059 = EDGE_CURVE('',#110052,#110060,#110062,.T.); +#110060 = VERTEX_POINT('',#110061); +#110061 = CARTESIAN_POINT('',(-6.585,-3.914116615009,-1.102691500902)); +#110062 = LINE('',#110063,#110064); +#110063 = CARTESIAN_POINT('',(-6.585,-3.887033384991,-0.936734073877)); +#110064 = VECTOR('',#110065,1.); +#110065 = DIRECTION('',(0.,-0.161063198037,-0.986944094789)); +#110066 = ORIENTED_EDGE('',*,*,#110067,.T.); +#110067 = EDGE_CURVE('',#110060,#110068,#110070,.T.); +#110068 = VERTEX_POINT('',#110069); +#110069 = CARTESIAN_POINT('',(-6.585,-3.914116615009,-1.296308499098)); +#110070 = LINE('',#110071,#110072); +#110071 = CARTESIAN_POINT('',(-6.585,-3.914116615009,-1.102691500902)); +#110072 = VECTOR('',#110073,1.); +#110073 = DIRECTION('',(0.,0.,-1.)); +#110074 = ORIENTED_EDGE('',*,*,#110075,.T.); +#110075 = EDGE_CURVE('',#110068,#110076,#110078,.T.); +#110076 = VERTEX_POINT('',#110077); +#110077 = CARTESIAN_POINT('',(-6.585,-3.887033384991,-1.462265964866)); +#110078 = LINE('',#110079,#110080); +#110079 = CARTESIAN_POINT('',(-6.585,-3.914116615009,-1.296308499098)); +#110080 = VECTOR('',#110081,1.); +#110081 = DIRECTION('',(0.,0.161063161412,-0.986944100766)); +#110082 = ORIENTED_EDGE('',*,*,#110083,.T.); +#110083 = EDGE_CURVE('',#110076,#110084,#110086,.T.); +#110084 = VERTEX_POINT('',#110085); +#110085 = CARTESIAN_POINT('',(-6.585,-3.7787,-1.628223411262)); +#110086 = LINE('',#110087,#110088); +#110087 = CARTESIAN_POINT('',(-6.585,-3.887033384991,-1.462265964866)); +#110088 = VECTOR('',#110089,1.); +#110089 = DIRECTION('',(0.,0.546622684656,-0.83737903044)); +#110090 = ORIENTED_EDGE('',*,*,#110091,.T.); +#110091 = EDGE_CURVE('',#110084,#110092,#110094,.T.); +#110092 = VERTEX_POINT('',#110093); +#110093 = CARTESIAN_POINT('',(-6.585,-3.69745,-1.683542553604)); +#110094 = LINE('',#110095,#110096); +#110095 = CARTESIAN_POINT('',(-6.585,-3.7787,-1.628223411262)); +#110096 = VECTOR('',#110097,1.); +#110097 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#110098 = ORIENTED_EDGE('',*,*,#110099,.T.); +#110099 = EDGE_CURVE('',#110092,#110100,#110102,.T.); +#110100 = VERTEX_POINT('',#110101); +#110101 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-1.711202124774)); +#110102 = LINE('',#110103,#110104); +#110103 = CARTESIAN_POINT('',(-6.585,-3.69745,-1.683542553604)); +#110104 = VECTOR('',#110105,1.); +#110105 = DIRECTION('',(0.,0.97977069431,-0.200123428343)); +#110106 = ORIENTED_EDGE('',*,*,#110107,.T.); +#110107 = EDGE_CURVE('',#110100,#110108,#110110,.T.); +#110108 = VERTEX_POINT('',#110109); +#110109 = CARTESIAN_POINT('',(-6.585,-3.426616615009,-1.683542553604)); +#110110 = LINE('',#110111,#110112); +#110111 = CARTESIAN_POINT('',(-6.585,-3.562033384991,-1.711202124774)); +#110112 = VECTOR('',#110113,1.); +#110113 = DIRECTION('',(0.,0.979770739215,0.200123208493)); +#110114 = ORIENTED_EDGE('',*,*,#110115,.T.); +#110115 = EDGE_CURVE('',#110108,#110116,#110118,.T.); +#110116 = VERTEX_POINT('',#110117); +#110117 = CARTESIAN_POINT('',(-6.585,-3.345366615009,-1.628223411262)); +#110118 = LINE('',#110119,#110120); +#110119 = CARTESIAN_POINT('',(-6.585,-3.426616615009,-1.683542553604)); +#110120 = VECTOR('',#110121,1.); +#110121 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#110122 = ORIENTED_EDGE('',*,*,#110123,.T.); +#110123 = EDGE_CURVE('',#110116,#110124,#110126,.T.); +#110124 = VERTEX_POINT('',#110125); +#110125 = CARTESIAN_POINT('',(-6.585,-3.237033384991,-1.462265964866)); +#110126 = LINE('',#110127,#110128); +#110127 = CARTESIAN_POINT('',(-6.585,-3.345366615009,-1.628223411262)); +#110128 = VECTOR('',#110129,1.); +#110129 = DIRECTION('',(0.,0.546622136349,0.837379388362)); +#110130 = ORIENTED_EDGE('',*,*,#110131,.T.); +#110131 = EDGE_CURVE('',#110124,#110132,#110134,.T.); +#110132 = VERTEX_POINT('',#110133); +#110133 = CARTESIAN_POINT('',(-6.585,-3.20995,-1.296308499098)); +#110134 = LINE('',#110135,#110136); +#110135 = CARTESIAN_POINT('',(-6.585,-3.237033384991,-1.462265964866)); +#110136 = VECTOR('',#110137,1.); +#110137 = DIRECTION('',(0.,0.161064059119,0.986943954265)); +#110138 = ORIENTED_EDGE('',*,*,#110139,.T.); +#110139 = EDGE_CURVE('',#110132,#110140,#110142,.T.); +#110140 = VERTEX_POINT('',#110141); +#110141 = CARTESIAN_POINT('',(-6.585,-3.20995,-1.102691500902)); +#110142 = LINE('',#110143,#110144); +#110143 = CARTESIAN_POINT('',(-6.585,-3.20995,-1.296308499098)); +#110144 = VECTOR('',#110145,1.); +#110145 = DIRECTION('',(0.,0.,1.)); +#110146 = ORIENTED_EDGE('',*,*,#110147,.T.); +#110147 = EDGE_CURVE('',#110140,#110010,#110148,.T.); +#110148 = LINE('',#110149,#110150); +#110149 = CARTESIAN_POINT('',(-6.585,-3.20995,-1.102691500902)); +#110150 = VECTOR('',#110151,1.); +#110151 = DIRECTION('',(0.,-0.161064095744,0.986943948288)); +#110152 = PLANE('',#110153); +#110153 = AXIS2_PLACEMENT_3D('',#110154,#110155,#110156); +#110154 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#110155 = DIRECTION('',(-1.,0.,0.)); +#110156 = DIRECTION('',(0.,0.,1.)); +#110157 = ADVANCED_FACE('',(#110158),#110616,.T.); +#110158 = FACE_BOUND('',#110159,.T.); +#110159 = EDGE_LOOP('',(#110160,#110170,#110178,#110186,#110194,#110202, + #110210,#110218,#110226,#110234,#110242,#110250,#110258,#110266, + #110274,#110282,#110290,#110298,#110306,#110314,#110322,#110330, + #110338,#110346,#110354,#110362,#110370,#110378,#110386,#110394, + #110402,#110410,#110418,#110426,#110434,#110442,#110450,#110458, + #110466,#110474,#110482,#110490,#110498,#110506,#110514,#110522, + #110530,#110538,#110546,#110554,#110562,#110570,#110578,#110586, + #110594,#110602,#110610)); +#110160 = ORIENTED_EDGE('',*,*,#110161,.T.); +#110161 = EDGE_CURVE('',#110162,#110164,#110166,.T.); +#110162 = VERTEX_POINT('',#110163); +#110163 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-1.628223411262)); +#110164 = VERTEX_POINT('',#110165); +#110165 = CARTESIAN_POINT('',(-6.585,-5.2412,-1.545244678378)); +#110166 = LINE('',#110167,#110168); +#110167 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-1.628223411262)); +#110168 = VECTOR('',#110169,1.); +#110169 = DIRECTION('',(0.,-0.310278929834,0.950645562605)); +#110170 = ORIENTED_EDGE('',*,*,#110171,.T.); +#110171 = EDGE_CURVE('',#110164,#110172,#110174,.T.); +#110172 = VERTEX_POINT('',#110173); +#110173 = CARTESIAN_POINT('',(-6.585,-5.2412,-1.434606393695)); +#110174 = LINE('',#110175,#110176); +#110175 = CARTESIAN_POINT('',(-6.585,-5.2412,-1.545244678378)); +#110176 = VECTOR('',#110177,1.); +#110177 = DIRECTION('',(0.,0.,1.)); +#110178 = ORIENTED_EDGE('',*,*,#110179,.T.); +#110179 = EDGE_CURVE('',#110172,#110180,#110182,.T.); +#110180 = VERTEX_POINT('',#110181); +#110181 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-1.323968070269)); +#110182 = LINE('',#110183,#110184); +#110183 = CARTESIAN_POINT('',(-6.585,-5.2412,-1.434606393695)); +#110184 = VECTOR('',#110185,1.); +#110185 = DIRECTION('',(0.,0.237770418166,0.971321382574)); +#110186 = ORIENTED_EDGE('',*,*,#110187,.T.); +#110187 = EDGE_CURVE('',#110180,#110188,#110190,.T.); +#110188 = VERTEX_POINT('',#110189); +#110189 = CARTESIAN_POINT('',(-6.585,-5.15995,-1.240989356756)); +#110190 = LINE('',#110191,#110192); +#110191 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-1.323968070269)); +#110192 = VECTOR('',#110193,1.); +#110193 = DIRECTION('',(0.,0.546623277701,0.837378643312)); +#110194 = ORIENTED_EDGE('',*,*,#110195,.T.); +#110195 = EDGE_CURVE('',#110188,#110196,#110198,.T.); +#110196 = VERTEX_POINT('',#110197); +#110197 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.185670214415)); +#110198 = LINE('',#110199,#110200); +#110199 = CARTESIAN_POINT('',(-6.585,-5.15995,-1.240989356756)); +#110200 = VECTOR('',#110201,1.); +#110201 = DIRECTION('',(0.,0.925735208255,0.378172347215)); +#110202 = ORIENTED_EDGE('',*,*,#110203,.T.); +#110203 = EDGE_CURVE('',#110196,#110204,#110206,.T.); +#110204 = VERTEX_POINT('',#110205); +#110205 = CARTESIAN_POINT('',(-6.585,-5.132866769981,-1.102691500902)); +#110206 = LINE('',#110207,#110208); +#110207 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.185670214415)); +#110208 = VECTOR('',#110209,1.); +#110209 = DIRECTION('',(0.,-0.793878740881,0.608076101139)); +#110210 = ORIENTED_EDGE('',*,*,#110211,.T.); +#110211 = EDGE_CURVE('',#110204,#110212,#110214,.T.); +#110212 = VERTEX_POINT('',#110213); +#110213 = CARTESIAN_POINT('',(-6.585,-5.187033230019,-1.01971278739)); +#110214 = LINE('',#110215,#110216); +#110215 = CARTESIAN_POINT('',(-6.585,-5.132866769981,-1.102691500902)); +#110216 = VECTOR('',#110217,1.); +#110217 = DIRECTION('',(0.,-0.546621084475,0.837380075)); +#110218 = ORIENTED_EDGE('',*,*,#110219,.T.); +#110219 = EDGE_CURVE('',#110212,#110220,#110222,.T.); +#110220 = VERTEX_POINT('',#110221); +#110221 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-0.909074502706)); +#110222 = LINE('',#110223,#110224); +#110223 = CARTESIAN_POINT('',(-6.585,-5.187033230019,-1.01971278739)); +#110224 = VECTOR('',#110225,1.); +#110225 = DIRECTION('',(0.,-0.23777306396,0.971320734904)); +#110226 = ORIENTED_EDGE('',*,*,#110227,.T.); +#110227 = EDGE_CURVE('',#110220,#110228,#110230,.T.); +#110228 = VERTEX_POINT('',#110229); +#110229 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-0.853755282879)); +#110230 = LINE('',#110231,#110232); +#110231 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-0.909074502706)); +#110232 = VECTOR('',#110233,1.); +#110233 = DIRECTION('',(0.,0.,1.)); +#110234 = ORIENTED_EDGE('',*,*,#110235,.T.); +#110235 = EDGE_CURVE('',#110228,#110236,#110238,.T.); +#110236 = VERTEX_POINT('',#110237); +#110237 = CARTESIAN_POINT('',(-6.585,-5.187033230019,-0.743116998196)); +#110238 = LINE('',#110239,#110240); +#110239 = CARTESIAN_POINT('',(-6.585,-5.214116769981,-0.853755282879)); +#110240 = VECTOR('',#110241,1.); +#110241 = DIRECTION('',(0.,0.23777306396,0.971320734904)); +#110242 = ORIENTED_EDGE('',*,*,#110243,.T.); +#110243 = EDGE_CURVE('',#110236,#110244,#110246,.T.); +#110244 = VERTEX_POINT('',#110245); +#110245 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.632478713512)); +#110246 = LINE('',#110247,#110248); +#110247 = CARTESIAN_POINT('',(-6.585,-5.187033230019,-0.743116998196)); +#110248 = VECTOR('',#110249,1.); +#110249 = DIRECTION('',(0.,0.699624494557,0.714510718335)); +#110250 = ORIENTED_EDGE('',*,*,#110251,.T.); +#110251 = EDGE_CURVE('',#110244,#110252,#110254,.T.); +#110252 = VERTEX_POINT('',#110253); +#110253 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-0.577159571171)); +#110254 = LINE('',#110255,#110256); +#110255 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.632478713512)); +#110256 = VECTOR('',#110257,1.); +#110257 = DIRECTION('',(0.,0.890605111202,0.454777457556)); +#110258 = ORIENTED_EDGE('',*,*,#110259,.T.); +#110259 = EDGE_CURVE('',#110252,#110260,#110262,.T.); +#110260 = VERTEX_POINT('',#110261); +#110261 = CARTESIAN_POINT('',(-6.585,-4.780783230019,-0.5495)); +#110262 = LINE('',#110263,#110264); +#110263 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-0.577159571171)); +#110264 = VECTOR('',#110265,1.); +#110265 = DIRECTION('',(0.,0.989524056498,0.144368076845)); +#110266 = ORIENTED_EDGE('',*,*,#110267,.T.); +#110267 = EDGE_CURVE('',#110260,#110268,#110270,.T.); +#110268 = VERTEX_POINT('',#110269); +#110269 = CARTESIAN_POINT('',(-6.585,-4.726616769981,-0.5495)); +#110270 = LINE('',#110271,#110272); +#110271 = CARTESIAN_POINT('',(-6.585,-4.780783230019,-0.5495)); +#110272 = VECTOR('',#110273,1.); +#110273 = DIRECTION('',(0.,1.,0.)); +#110274 = ORIENTED_EDGE('',*,*,#110275,.T.); +#110275 = EDGE_CURVE('',#110268,#110276,#110278,.T.); +#110276 = VERTEX_POINT('',#110277); +#110277 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-0.577159571171)); +#110278 = LINE('',#110279,#110280); +#110279 = CARTESIAN_POINT('',(-6.585,-4.726616769981,-0.5495)); +#110280 = VECTOR('',#110281,1.); +#110281 = DIRECTION('',(0.,0.989524056498,-0.144368076845)); +#110282 = ORIENTED_EDGE('',*,*,#110283,.T.); +#110283 = EDGE_CURVE('',#110276,#110284,#110286,.T.); +#110284 = VERTEX_POINT('',#110285); +#110285 = CARTESIAN_POINT('',(-6.585,-4.4287,-0.632478713512)); +#110286 = LINE('',#110287,#110288); +#110287 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-0.577159571171)); +#110288 = VECTOR('',#110289,1.); +#110289 = DIRECTION('',(0.,0.890605111202,-0.454777457556)); +#110290 = ORIENTED_EDGE('',*,*,#110291,.T.); +#110291 = EDGE_CURVE('',#110284,#110292,#110294,.T.); +#110292 = VERTEX_POINT('',#110293); +#110293 = CARTESIAN_POINT('',(-6.585,-4.320366769981,-0.743116998196)); +#110294 = LINE('',#110295,#110296); +#110295 = CARTESIAN_POINT('',(-6.585,-4.4287,-0.632478713512)); +#110296 = VECTOR('',#110297,1.); +#110297 = DIRECTION('',(0.,0.699624494557,-0.714510718335)); +#110298 = ORIENTED_EDGE('',*,*,#110299,.T.); +#110299 = EDGE_CURVE('',#110292,#110300,#110302,.T.); +#110300 = VERTEX_POINT('',#110301); +#110301 = CARTESIAN_POINT('',(-6.585,-4.293283230019,-0.853755282879)); +#110302 = LINE('',#110303,#110304); +#110303 = CARTESIAN_POINT('',(-6.585,-4.320366769981,-0.743116998196)); +#110304 = VECTOR('',#110305,1.); +#110305 = DIRECTION('',(0.,0.23777306396,-0.971320734904)); +#110306 = ORIENTED_EDGE('',*,*,#110307,.T.); +#110307 = EDGE_CURVE('',#110300,#110308,#110310,.T.); +#110308 = VERTEX_POINT('',#110309); +#110309 = CARTESIAN_POINT('',(-6.585,-4.4287,-0.853755282879)); +#110310 = LINE('',#110311,#110312); +#110311 = CARTESIAN_POINT('',(-6.585,-4.293283230019,-0.853755282879)); +#110312 = VECTOR('',#110313,1.); +#110313 = DIRECTION('',(0.,-1.,0.)); +#110314 = ORIENTED_EDGE('',*,*,#110315,.T.); +#110315 = EDGE_CURVE('',#110308,#110316,#110318,.T.); +#110316 = VERTEX_POINT('',#110317); +#110317 = CARTESIAN_POINT('',(-6.585,-4.482866769981,-0.770776569367)); +#110318 = LINE('',#110319,#110320); +#110319 = CARTESIAN_POINT('',(-6.585,-4.4287,-0.853755282879)); +#110320 = VECTOR('',#110321,1.); +#110321 = DIRECTION('',(0.,-0.546623277701,0.837378643312)); +#110322 = ORIENTED_EDGE('',*,*,#110323,.T.); +#110323 = EDGE_CURVE('',#110316,#110324,#110326,.T.); +#110324 = VERTEX_POINT('',#110325); +#110325 = CARTESIAN_POINT('',(-6.585,-4.564116769981,-0.715457427025)); +#110326 = LINE('',#110327,#110328); +#110327 = CARTESIAN_POINT('',(-6.585,-4.482866769981,-0.770776569367)); +#110328 = VECTOR('',#110329,1.); +#110329 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#110330 = ORIENTED_EDGE('',*,*,#110331,.T.); +#110331 = EDGE_CURVE('',#110324,#110332,#110334,.T.); +#110332 = VERTEX_POINT('',#110333); +#110333 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-0.687797855854)); +#110334 = LINE('',#110335,#110336); +#110335 = CARTESIAN_POINT('',(-6.585,-4.564116769981,-0.715457427025)); +#110336 = VECTOR('',#110337,1.); +#110337 = DIRECTION('',(0.,-0.979770649404,0.200123648195)); +#110338 = ORIENTED_EDGE('',*,*,#110339,.T.); +#110339 = EDGE_CURVE('',#110332,#110340,#110342,.T.); +#110340 = VERTEX_POINT('',#110341); +#110341 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-0.687797855854)); +#110342 = LINE('',#110343,#110344); +#110343 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-0.687797855854)); +#110344 = VECTOR('',#110345,1.); +#110345 = DIRECTION('',(0.,-1.,0.)); +#110346 = ORIENTED_EDGE('',*,*,#110347,.T.); +#110347 = EDGE_CURVE('',#110340,#110348,#110350,.T.); +#110348 = VERTEX_POINT('',#110349); +#110349 = CARTESIAN_POINT('',(-6.585,-4.943283230019,-0.715457427025)); +#110350 = LINE('',#110351,#110352); +#110351 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-0.687797855854)); +#110352 = VECTOR('',#110353,1.); +#110353 = DIRECTION('',(0.,-0.979770649404,-0.200123648195)); +#110354 = ORIENTED_EDGE('',*,*,#110355,.T.); +#110355 = EDGE_CURVE('',#110348,#110356,#110358,.T.); +#110356 = VERTEX_POINT('',#110357); +#110357 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-0.770776569367)); +#110358 = LINE('',#110359,#110360); +#110359 = CARTESIAN_POINT('',(-6.585,-4.943283230019,-0.715457427025)); +#110360 = VECTOR('',#110361,1.); +#110361 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#110362 = ORIENTED_EDGE('',*,*,#110363,.T.); +#110363 = EDGE_CURVE('',#110356,#110364,#110366,.T.); +#110364 = VERTEX_POINT('',#110365); +#110365 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.853755282879)); +#110366 = LINE('',#110367,#110368); +#110367 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-0.770776569367)); +#110368 = VECTOR('',#110369,1.); +#110369 = DIRECTION('',(0.,-0.546623277701,-0.837378643312)); +#110370 = ORIENTED_EDGE('',*,*,#110371,.T.); +#110371 = EDGE_CURVE('',#110364,#110372,#110374,.T.); +#110372 = VERTEX_POINT('',#110373); +#110373 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.909074502706)); +#110374 = LINE('',#110375,#110376); +#110375 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.853755282879)); +#110376 = VECTOR('',#110377,1.); +#110377 = DIRECTION('',(0.,0.,-1.)); +#110378 = ORIENTED_EDGE('',*,*,#110379,.T.); +#110379 = EDGE_CURVE('',#110372,#110380,#110382,.T.); +#110380 = VERTEX_POINT('',#110381); +#110381 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.01971278739)); +#110382 = LINE('',#110383,#110384); +#110383 = CARTESIAN_POINT('',(-6.585,-5.0787,-0.909074502706)); +#110384 = VECTOR('',#110385,1.); +#110385 = DIRECTION('',(0.,0.439714172353,-0.898137765954)); +#110386 = ORIENTED_EDGE('',*,*,#110387,.T.); +#110387 = EDGE_CURVE('',#110380,#110388,#110390,.T.); +#110388 = VERTEX_POINT('',#110389); +#110389 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.075031929731)); +#110390 = LINE('',#110391,#110392); +#110391 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.01971278739)); +#110392 = VECTOR('',#110393,1.); +#110393 = DIRECTION('',(0.,0.699623472665,-0.714511718936)); +#110394 = ORIENTED_EDGE('',*,*,#110395,.T.); +#110395 = EDGE_CURVE('',#110388,#110396,#110398,.T.); +#110396 = VERTEX_POINT('',#110397); +#110397 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-1.130351072073)); +#110398 = LINE('',#110399,#110400); +#110399 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.075031929731)); +#110400 = VECTOR('',#110401,1.); +#110401 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#110402 = ORIENTED_EDGE('',*,*,#110403,.T.); +#110403 = EDGE_CURVE('',#110396,#110404,#110406,.T.); +#110404 = VERTEX_POINT('',#110405); +#110405 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-1.130351072073)); +#110406 = LINE('',#110407,#110408); +#110407 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-1.130351072073)); +#110408 = VECTOR('',#110409,1.); +#110409 = DIRECTION('',(0.,1.,0.)); +#110410 = ORIENTED_EDGE('',*,*,#110411,.T.); +#110411 = EDGE_CURVE('',#110404,#110412,#110414,.T.); +#110412 = VERTEX_POINT('',#110413); +#110413 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-1.240989356756)); +#110414 = LINE('',#110415,#110416); +#110415 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-1.130351072073)); +#110416 = VECTOR('',#110417,1.); +#110417 = DIRECTION('',(0.,0.,-1.)); +#110418 = ORIENTED_EDGE('',*,*,#110419,.T.); +#110419 = EDGE_CURVE('',#110412,#110420,#110422,.T.); +#110420 = VERTEX_POINT('',#110421); +#110421 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-1.240989356756)); +#110422 = LINE('',#110423,#110424); +#110423 = CARTESIAN_POINT('',(-6.585,-4.699533230019,-1.240989356756)); +#110424 = VECTOR('',#110425,1.); +#110425 = DIRECTION('',(0.,-1.,0.)); +#110426 = ORIENTED_EDGE('',*,*,#110427,.T.); +#110427 = EDGE_CURVE('',#110420,#110428,#110430,.T.); +#110428 = VERTEX_POINT('',#110429); +#110429 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.268648927927)); +#110430 = LINE('',#110431,#110432); +#110431 = CARTESIAN_POINT('',(-6.585,-4.807866769981,-1.240989356756)); +#110432 = VECTOR('',#110433,1.); +#110433 = DIRECTION('',(0.,-0.985821173093,-0.167799328608)); +#110434 = ORIENTED_EDGE('',*,*,#110435,.T.); +#110435 = EDGE_CURVE('',#110428,#110436,#110438,.T.); +#110436 = VERTEX_POINT('',#110437); +#110437 = CARTESIAN_POINT('',(-6.585,-5.051616769981,-1.323968070269)); +#110438 = LINE('',#110439,#110440); +#110439 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.268648927927)); +#110440 = VECTOR('',#110441,1.); +#110441 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#110442 = ORIENTED_EDGE('',*,*,#110443,.T.); +#110443 = EDGE_CURVE('',#110436,#110444,#110446,.T.); +#110444 = VERTEX_POINT('',#110445); +#110445 = CARTESIAN_POINT('',(-6.585,-5.105783230019,-1.434606393695)); +#110446 = LINE('',#110447,#110448); +#110447 = CARTESIAN_POINT('',(-6.585,-5.051616769981,-1.323968070269)); +#110448 = VECTOR('',#110449,1.); +#110449 = DIRECTION('',(0.,-0.43971201856,-0.898138820414)); +#110450 = ORIENTED_EDGE('',*,*,#110451,.T.); +#110451 = EDGE_CURVE('',#110444,#110452,#110454,.T.); +#110452 = VERTEX_POINT('',#110453); +#110453 = CARTESIAN_POINT('',(-6.585,-5.105783230019,-1.545244678378)); +#110454 = LINE('',#110455,#110456); +#110455 = CARTESIAN_POINT('',(-6.585,-5.105783230019,-1.434606393695)); +#110456 = VECTOR('',#110457,1.); +#110457 = DIRECTION('',(0.,0.,-1.)); +#110458 = ORIENTED_EDGE('',*,*,#110459,.T.); +#110459 = EDGE_CURVE('',#110452,#110460,#110462,.T.); +#110460 = VERTEX_POINT('',#110461); +#110461 = CARTESIAN_POINT('',(-6.585,-5.0787,-1.60056382072)); +#110462 = LINE('',#110463,#110464); +#110463 = CARTESIAN_POINT('',(-6.585,-5.105783230019,-1.545244678378)); +#110464 = VECTOR('',#110465,1.); +#110465 = DIRECTION('',(0.,0.439712142766,-0.898138759605)); +#110466 = ORIENTED_EDGE('',*,*,#110467,.T.); +#110467 = EDGE_CURVE('',#110460,#110468,#110470,.T.); +#110468 = VERTEX_POINT('',#110469); +#110469 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.655882982433)); +#110470 = LINE('',#110471,#110472); +#110471 = CARTESIAN_POINT('',(-6.585,-5.0787,-1.60056382072)); +#110472 = VECTOR('',#110473,1.); +#110473 = DIRECTION('',(0.,0.69962539137,-0.714509840205)); +#110474 = ORIENTED_EDGE('',*,*,#110475,.T.); +#110475 = EDGE_CURVE('',#110468,#110476,#110478,.T.); +#110476 = VERTEX_POINT('',#110477); +#110477 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.683542553604)); +#110478 = LINE('',#110479,#110480); +#110479 = CARTESIAN_POINT('',(-6.585,-5.024533230019,-1.655882982433)); +#110480 = VECTOR('',#110481,1.); +#110481 = DIRECTION('',(0.,0.890604584207,-0.454778489585)); +#110482 = ORIENTED_EDGE('',*,*,#110483,.T.); +#110483 = EDGE_CURVE('',#110476,#110484,#110486,.T.); +#110484 = VERTEX_POINT('',#110485); +#110485 = CARTESIAN_POINT('',(-6.585,-4.83495,-1.711202124774)); +#110486 = LINE('',#110487,#110488); +#110487 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.683542553604)); +#110488 = VECTOR('',#110489,1.); +#110489 = DIRECTION('',(0.,0.979770739215,-0.200123208493)); +#110490 = ORIENTED_EDGE('',*,*,#110491,.T.); +#110491 = EDGE_CURVE('',#110484,#110492,#110494,.T.); +#110492 = VERTEX_POINT('',#110493); +#110493 = CARTESIAN_POINT('',(-6.585,-4.67245,-1.711202124774)); +#110494 = LINE('',#110495,#110496); +#110495 = CARTESIAN_POINT('',(-6.585,-4.83495,-1.711202124774)); +#110496 = VECTOR('',#110497,1.); +#110497 = DIRECTION('',(0.,1.,0.)); +#110498 = ORIENTED_EDGE('',*,*,#110499,.T.); +#110499 = EDGE_CURVE('',#110492,#110500,#110502,.T.); +#110500 = VERTEX_POINT('',#110501); +#110501 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-1.683542553604)); +#110502 = LINE('',#110503,#110504); +#110503 = CARTESIAN_POINT('',(-6.585,-4.67245,-1.711202124774)); +#110504 = VECTOR('',#110505,1.); +#110505 = DIRECTION('',(0.,0.979770739215,0.200123208493)); +#110506 = ORIENTED_EDGE('',*,*,#110507,.T.); +#110507 = EDGE_CURVE('',#110500,#110508,#110510,.T.); +#110508 = VERTEX_POINT('',#110509); +#110509 = CARTESIAN_POINT('',(-6.585,-4.482866769981,-1.655882982433)); +#110510 = LINE('',#110511,#110512); +#110511 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-1.683542553604)); +#110512 = VECTOR('',#110513,1.); +#110513 = DIRECTION('',(0.,0.890604584207,0.454778489585)); +#110514 = ORIENTED_EDGE('',*,*,#110515,.T.); +#110515 = EDGE_CURVE('',#110508,#110516,#110518,.T.); +#110516 = VERTEX_POINT('',#110517); +#110517 = CARTESIAN_POINT('',(-6.585,-4.4287,-1.60056382072)); +#110518 = LINE('',#110519,#110520); +#110519 = CARTESIAN_POINT('',(-6.585,-4.482866769981,-1.655882982433)); +#110520 = VECTOR('',#110521,1.); +#110521 = DIRECTION('',(0.,0.69962539137,0.714509840205)); +#110522 = ORIENTED_EDGE('',*,*,#110523,.T.); +#110523 = EDGE_CURVE('',#110516,#110524,#110526,.T.); +#110524 = VERTEX_POINT('',#110525); +#110525 = CARTESIAN_POINT('',(-6.585,-4.401616769981,-1.545244678378)); +#110526 = LINE('',#110527,#110528); +#110527 = CARTESIAN_POINT('',(-6.585,-4.4287,-1.60056382072)); +#110528 = VECTOR('',#110529,1.); +#110529 = DIRECTION('',(0.,0.439712142766,0.898138759605)); +#110530 = ORIENTED_EDGE('',*,*,#110531,.T.); +#110531 = EDGE_CURVE('',#110524,#110532,#110534,.T.); +#110532 = VERTEX_POINT('',#110533); +#110533 = CARTESIAN_POINT('',(-6.585,-4.2662,-1.545244678378)); +#110534 = LINE('',#110535,#110536); +#110535 = CARTESIAN_POINT('',(-6.585,-4.401616769981,-1.545244678378)); +#110536 = VECTOR('',#110537,1.); +#110537 = DIRECTION('',(0.,1.,0.)); +#110538 = ORIENTED_EDGE('',*,*,#110539,.T.); +#110539 = EDGE_CURVE('',#110532,#110540,#110542,.T.); +#110540 = VERTEX_POINT('',#110541); +#110541 = CARTESIAN_POINT('',(-6.585,-4.293283230019,-1.628223411262)); +#110542 = LINE('',#110543,#110544); +#110543 = CARTESIAN_POINT('',(-6.585,-4.2662,-1.545244678378)); +#110544 = VECTOR('',#110545,1.); +#110545 = DIRECTION('',(0.,-0.310278929834,-0.950645562605)); +#110546 = ORIENTED_EDGE('',*,*,#110547,.T.); +#110547 = EDGE_CURVE('',#110540,#110548,#110550,.T.); +#110548 = VERTEX_POINT('',#110549); +#110549 = CARTESIAN_POINT('',(-6.585,-4.34745,-1.711202124774)); +#110550 = LINE('',#110551,#110552); +#110551 = CARTESIAN_POINT('',(-6.585,-4.293283230019,-1.628223411262)); +#110552 = VECTOR('',#110553,1.); +#110553 = DIRECTION('',(0.,-0.546623277701,-0.837378643312)); +#110554 = ORIENTED_EDGE('',*,*,#110555,.T.); +#110555 = EDGE_CURVE('',#110548,#110556,#110558,.T.); +#110556 = VERTEX_POINT('',#110557); +#110557 = CARTESIAN_POINT('',(-6.585,-4.4287,-1.766521276802)); +#110558 = LINE('',#110559,#110560); +#110559 = CARTESIAN_POINT('',(-6.585,-4.34745,-1.711202124774)); +#110560 = VECTOR('',#110561,1.); +#110561 = DIRECTION('',(0.,-0.826599232959,-0.56279099857)); +#110562 = ORIENTED_EDGE('',*,*,#110563,.T.); +#110563 = EDGE_CURVE('',#110556,#110564,#110566,.T.); +#110564 = VERTEX_POINT('',#110565); +#110565 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-1.821840426408)); +#110566 = LINE('',#110567,#110568); +#110567 = CARTESIAN_POINT('',(-6.585,-4.4287,-1.766521276802)); +#110568 = VECTOR('',#110569,1.); +#110569 = DIRECTION('',(0.,-0.890605087014,-0.454777504925)); +#110570 = ORIENTED_EDGE('',*,*,#110571,.T.); +#110571 = EDGE_CURVE('',#110564,#110572,#110574,.T.); +#110572 = VERTEX_POINT('',#110573); +#110573 = CARTESIAN_POINT('',(-6.585,-4.645366769981,-1.8495)); +#110574 = LINE('',#110575,#110576); +#110575 = CARTESIAN_POINT('',(-6.585,-4.537033230019,-1.821840426408)); +#110576 = VECTOR('',#110577,1.); +#110577 = DIRECTION('',(0.,-0.9689178256,-0.247382794943)); +#110578 = ORIENTED_EDGE('',*,*,#110579,.T.); +#110579 = EDGE_CURVE('',#110572,#110580,#110582,.T.); +#110580 = VERTEX_POINT('',#110581); +#110581 = CARTESIAN_POINT('',(-6.585,-4.862033230019,-1.8495)); +#110582 = LINE('',#110583,#110584); +#110583 = CARTESIAN_POINT('',(-6.585,-4.645366769981,-1.8495)); +#110584 = VECTOR('',#110585,1.); +#110585 = DIRECTION('',(0.,-1.,0.)); +#110586 = ORIENTED_EDGE('',*,*,#110587,.T.); +#110587 = EDGE_CURVE('',#110580,#110588,#110590,.T.); +#110588 = VERTEX_POINT('',#110589); +#110589 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.821840426408)); +#110590 = LINE('',#110591,#110592); +#110591 = CARTESIAN_POINT('',(-6.585,-4.862033230019,-1.8495)); +#110592 = VECTOR('',#110593,1.); +#110593 = DIRECTION('',(0.,-0.9689178256,0.247382794943)); +#110594 = ORIENTED_EDGE('',*,*,#110595,.T.); +#110595 = EDGE_CURVE('',#110588,#110596,#110598,.T.); +#110596 = VERTEX_POINT('',#110597); +#110597 = CARTESIAN_POINT('',(-6.585,-5.0787,-1.766521276802)); +#110598 = LINE('',#110599,#110600); +#110599 = CARTESIAN_POINT('',(-6.585,-4.970366769981,-1.821840426408)); +#110600 = VECTOR('',#110601,1.); +#110601 = DIRECTION('',(0.,-0.890605087014,0.454777504925)); +#110602 = ORIENTED_EDGE('',*,*,#110603,.T.); +#110603 = EDGE_CURVE('',#110596,#110604,#110606,.T.); +#110604 = VERTEX_POINT('',#110605); +#110605 = CARTESIAN_POINT('',(-6.585,-5.15995,-1.711202124774)); +#110606 = LINE('',#110607,#110608); +#110607 = CARTESIAN_POINT('',(-6.585,-5.0787,-1.766521276802)); +#110608 = VECTOR('',#110609,1.); +#110609 = DIRECTION('',(0.,-0.826599232959,0.56279099857)); +#110610 = ORIENTED_EDGE('',*,*,#110611,.T.); +#110611 = EDGE_CURVE('',#110604,#110162,#110612,.T.); +#110612 = LINE('',#110613,#110614); +#110613 = CARTESIAN_POINT('',(-6.585,-5.15995,-1.711202124774)); +#110614 = VECTOR('',#110615,1.); +#110615 = DIRECTION('',(0.,-0.546623277701,0.837378643312)); +#110616 = PLANE('',#110617); +#110617 = AXIS2_PLACEMENT_3D('',#110618,#110619,#110620); +#110618 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#110619 = DIRECTION('',(-1.,0.,0.)); +#110620 = DIRECTION('',(0.,0.,1.)); +#110621 = ADVANCED_FACE('',(#110622,#110928,#111018),#111116,.T.); +#110622 = FACE_BOUND('',#110623,.T.); +#110623 = EDGE_LOOP('',(#110624,#110634,#110642,#110650,#110658,#110666, + #110674,#110682,#110690,#110698,#110706,#110714,#110722,#110730, + #110738,#110746,#110754,#110762,#110770,#110778,#110786,#110794, + #110802,#110810,#110818,#110826,#110834,#110842,#110850,#110858, + #110866,#110874,#110882,#110890,#110898,#110906,#110914,#110922)); +#110624 = ORIENTED_EDGE('',*,*,#110625,.T.); +#110625 = EDGE_CURVE('',#110626,#110628,#110630,.T.); +#110626 = VERTEX_POINT('',#110627); +#110627 = CARTESIAN_POINT('',(-6.585,3.390572087667,-1.580080685205)); +#110628 = VERTEX_POINT('',#110629); +#110629 = CARTESIAN_POINT('',(-6.585,3.444168476182,-1.630978707164)); +#110630 = LINE('',#110631,#110632); +#110631 = CARTESIAN_POINT('',(-6.585,3.390572087667,-1.580080685205)); +#110632 = VECTOR('',#110633,1.); +#110633 = DIRECTION('',(0.,0.725124722109,-0.688617555241)); +#110634 = ORIENTED_EDGE('',*,*,#110635,.T.); +#110635 = EDGE_CURVE('',#110628,#110636,#110638,.T.); +#110636 = VERTEX_POINT('',#110637); +#110637 = CARTESIAN_POINT('',(-6.585,3.466423944016,-1.672376119536)); +#110638 = LINE('',#110639,#110640); +#110639 = CARTESIAN_POINT('',(-6.585,3.444168476182,-1.630978707164)); +#110640 = VECTOR('',#110641,1.); +#110641 = DIRECTION('',(0.,0.473515061872,-0.880785720922)); +#110642 = ORIENTED_EDGE('',*,*,#110643,.T.); +#110643 = EDGE_CURVE('',#110636,#110644,#110646,.T.); +#110644 = VERTEX_POINT('',#110645); +#110645 = CARTESIAN_POINT('',(-6.585,3.471691951487,-1.701693813812)); +#110646 = LINE('',#110647,#110648); +#110647 = CARTESIAN_POINT('',(-6.585,3.466423944016,-1.672376119536)); +#110648 = VECTOR('',#110649,1.); +#110649 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#110650 = ORIENTED_EDGE('',*,*,#110651,.T.); +#110651 = EDGE_CURVE('',#110644,#110652,#110654,.T.); +#110652 = VERTEX_POINT('',#110653); +#110653 = CARTESIAN_POINT('',(-6.585,3.465240506065,-1.748249484268)); +#110654 = LINE('',#110655,#110656); +#110655 = CARTESIAN_POINT('',(-6.585,3.471691951487,-1.701693813812)); +#110656 = VECTOR('',#110657,1.); +#110657 = DIRECTION('',(0.,-0.137263193072,-0.990534611121)); +#110658 = ORIENTED_EDGE('',*,*,#110659,.T.); +#110659 = EDGE_CURVE('',#110652,#110660,#110662,.T.); +#110660 = VERTEX_POINT('',#110661); +#110661 = CARTESIAN_POINT('',(-6.585,3.444435607143,-1.797384293801)); +#110662 = LINE('',#110663,#110664); +#110663 = CARTESIAN_POINT('',(-6.585,3.465240506065,-1.748249484268)); +#110664 = VECTOR('',#110665,1.); +#110665 = DIRECTION('',(0.,-0.389911714975,-0.92085224359)); +#110666 = ORIENTED_EDGE('',*,*,#110667,.T.); +#110667 = EDGE_CURVE('',#110660,#110668,#110670,.T.); +#110668 = VERTEX_POINT('',#110669); +#110669 = CARTESIAN_POINT('',(-6.585,3.40927725067,-1.849098227243)); +#110670 = LINE('',#110671,#110672); +#110671 = CARTESIAN_POINT('',(-6.585,3.444435607143,-1.797384293801)); +#110672 = VECTOR('',#110673,1.); +#110673 = DIRECTION('',(0.,-0.562232180267,-0.826979428687)); +#110674 = ORIENTED_EDGE('',*,*,#110675,.T.); +#110675 = EDGE_CURVE('',#110668,#110676,#110678,.T.); +#110676 = VERTEX_POINT('',#110677); +#110677 = CARTESIAN_POINT('',(-6.585,3.357131437453,-1.888732440613)); +#110678 = LINE('',#110679,#110680); +#110679 = CARTESIAN_POINT('',(-6.585,3.40927725067,-1.849098227243)); +#110680 = VECTOR('',#110681,1.); +#110681 = DIRECTION('',(0.,-0.796137220678,-0.605116125922)); +#110682 = ORIENTED_EDGE('',*,*,#110683,.T.); +#110683 = EDGE_CURVE('',#110676,#110684,#110686,.T.); +#110684 = VERTEX_POINT('',#110685); +#110685 = CARTESIAN_POINT('',(-6.585,3.30235162004,-1.91370780428)); +#110686 = LINE('',#110687,#110688); +#110687 = CARTESIAN_POINT('',(-6.585,3.357131437453,-1.888732440613)); +#110688 = VECTOR('',#110689,1.); +#110689 = DIRECTION('',(0.,-0.909893800272,-0.414841261481)); +#110690 = ORIENTED_EDGE('',*,*,#110691,.T.); +#110691 = EDGE_CURVE('',#110684,#110692,#110694,.T.); +#110692 = VERTEX_POINT('',#110693); +#110693 = CARTESIAN_POINT('',(-6.585,3.25929125144,-1.921445191174)); +#110694 = LINE('',#110695,#110696); +#110695 = CARTESIAN_POINT('',(-6.585,3.30235162004,-1.91370780428)); +#110696 = VECTOR('',#110697,1.); +#110697 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#110698 = ORIENTED_EDGE('',*,*,#110699,.T.); +#110699 = EDGE_CURVE('',#110692,#110700,#110702,.T.); +#110700 = VERTEX_POINT('',#110701); +#110701 = CARTESIAN_POINT('',(-6.585,3.199243415828,-1.917102859843)); +#110702 = LINE('',#110703,#110704); +#110703 = CARTESIAN_POINT('',(-6.585,3.25929125144,-1.921445191174)); +#110704 = VECTOR('',#110705,1.); +#110705 = DIRECTION('',(0.,-0.997395514455,7.212619319717E-02)); +#110706 = ORIENTED_EDGE('',*,*,#110707,.T.); +#110707 = EDGE_CURVE('',#110700,#110708,#110710,.T.); +#110708 = VERTEX_POINT('',#110709); +#110709 = CARTESIAN_POINT('',(-6.585,3.136561596553,-1.898101675117)); +#110710 = LINE('',#110711,#110712); +#110711 = CARTESIAN_POINT('',(-6.585,3.199243415828,-1.917102859843)); +#110712 = VECTOR('',#110713,1.); +#110713 = DIRECTION('',(0.,-0.956996034471,0.290100999667)); +#110714 = ORIENTED_EDGE('',*,*,#110715,.T.); +#110715 = EDGE_CURVE('',#110708,#110716,#110718,.T.); +#110716 = VERTEX_POINT('',#110717); +#110717 = CARTESIAN_POINT('',(-6.585,3.115756682593,-1.947236482054)); +#110718 = LINE('',#110719,#110720); +#110719 = CARTESIAN_POINT('',(-6.585,3.136561596553,-1.898101675117)); +#110720 = VECTOR('',#110721,1.); +#110721 = DIRECTION('',(0.,-0.389911971444,-0.920852134995)); +#110722 = ORIENTED_EDGE('',*,*,#110723,.T.); +#110723 = EDGE_CURVE('',#110716,#110724,#110726,.T.); +#110724 = VERTEX_POINT('',#110725); +#110725 = CARTESIAN_POINT('',(-6.585,3.043989387903,-1.960132129338)); +#110726 = LINE('',#110727,#110728); +#110727 = CARTESIAN_POINT('',(-6.585,3.115756682593,-1.947236482054)); +#110728 = VECTOR('',#110729,1.); +#110729 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#110730 = ORIENTED_EDGE('',*,*,#110731,.T.); +#110731 = EDGE_CURVE('',#110724,#110732,#110734,.T.); +#110732 = VERTEX_POINT('',#110733); +#110733 = CARTESIAN_POINT('',(-6.585,3.085599215824,-1.861862515465)); +#110734 = LINE('',#110735,#110736); +#110735 = CARTESIAN_POINT('',(-6.585,3.043989387903,-1.960132129338)); +#110736 = VECTOR('',#110737,1.); +#110737 = DIRECTION('',(0.,0.389911971444,0.920852134995)); +#110738 = ORIENTED_EDGE('',*,*,#110739,.T.); +#110739 = EDGE_CURVE('',#110732,#110740,#110742,.T.); +#110740 = VERTEX_POINT('',#110741); +#110741 = CARTESIAN_POINT('',(-6.585,3.048990276684,-1.823044224175)); +#110742 = LINE('',#110743,#110744); +#110743 = CARTESIAN_POINT('',(-6.585,3.085599215824,-1.861862515465)); +#110744 = VECTOR('',#110745,1.); +#110745 = DIRECTION('',(0.,-0.686100528513,0.727506745518)); +#110746 = ORIENTED_EDGE('',*,*,#110747,.T.); +#110747 = EDGE_CURVE('',#110740,#110748,#110750,.T.); +#110748 = VERTEX_POINT('',#110749); +#110749 = CARTESIAN_POINT('',(-6.585,3.007113331919,-1.754908248875)); +#110750 = LINE('',#110751,#110752); +#110751 = CARTESIAN_POINT('',(-6.585,3.048990276684,-1.823044224175)); +#110752 = VECTOR('',#110753,1.); +#110753 = DIRECTION('',(0.,-0.523617705875,0.851953342675)); +#110754 = ORIENTED_EDGE('',*,*,#110755,.T.); +#110755 = EDGE_CURVE('',#110748,#110756,#110758,.T.); +#110756 = VERTEX_POINT('',#110757); +#110757 = CARTESIAN_POINT('',(-6.585,2.991309305817,-1.666955145514)); +#110758 = LINE('',#110759,#110760); +#110759 = CARTESIAN_POINT('',(-6.585,3.007113331919,-1.754908248875)); +#110760 = VECTOR('',#110761,1.); +#110761 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#110762 = ORIENTED_EDGE('',*,*,#110763,.T.); +#110763 = EDGE_CURVE('',#110756,#110764,#110766,.T.); +#110764 = VERTEX_POINT('',#110765); +#110765 = CARTESIAN_POINT('',(-6.585,3.048723157995,-1.656638624735)); +#110766 = LINE('',#110767,#110768); +#110767 = CARTESIAN_POINT('',(-6.585,2.991309305817,-1.666955145514)); +#110768 = VECTOR('',#110769,1.); +#110769 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#110770 = ORIENTED_EDGE('',*,*,#110771,.T.); +#110771 = EDGE_CURVE('',#110764,#110772,#110774,.T.); +#110772 = VERTEX_POINT('',#110773); +#110773 = CARTESIAN_POINT('',(-6.585,3.064527184097,-1.744591728096)); +#110774 = LINE('',#110775,#110776); +#110775 = CARTESIAN_POINT('',(-6.585,3.048723157995,-1.656638624735)); +#110776 = VECTOR('',#110777,1.); +#110777 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#110778 = ORIENTED_EDGE('',*,*,#110779,.T.); +#110779 = EDGE_CURVE('',#110772,#110780,#110782,.T.); +#110780 = VERTEX_POINT('',#110781); +#110781 = CARTESIAN_POINT('',(-6.585,3.086782637815,-1.785989143004)); +#110782 = LINE('',#110783,#110784); +#110783 = CARTESIAN_POINT('',(-6.585,3.064527184097,-1.744591728096)); +#110784 = VECTOR('',#110785,1.); +#110785 = DIRECTION('',(0.,0.473514806363,-0.880785858285)); +#110786 = ORIENTED_EDGE('',*,*,#110787,.T.); +#110787 = EDGE_CURVE('',#110780,#110788,#110790,.T.); +#110788 = VERTEX_POINT('',#110789); +#110789 = CARTESIAN_POINT('',(-6.585,3.106404087797,-1.812727710775)); +#110790 = LINE('',#110791,#110792); +#110791 = CARTESIAN_POINT('',(-6.585,3.086782637815,-1.785989143004)); +#110792 = VECTOR('',#110793,1.); +#110793 = DIRECTION('',(0.,0.591621802683,-0.806215630331)); +#110794 = ORIENTED_EDGE('',*,*,#110795,.T.); +#110795 = EDGE_CURVE('',#110788,#110796,#110798,.T.); +#110796 = VERTEX_POINT('',#110797); +#110797 = CARTESIAN_POINT('',(-6.585,3.219514052499,-1.535156867823)); +#110798 = LINE('',#110799,#110800); +#110799 = CARTESIAN_POINT('',(-6.585,3.106404087797,-1.812727710775)); +#110800 = VECTOR('',#110801,1.); +#110801 = DIRECTION('',(0.,0.377369986318,0.92606257533)); +#110802 = ORIENTED_EDGE('',*,*,#110803,.T.); +#110803 = EDGE_CURVE('',#110796,#110804,#110806,.T.); +#110804 = VERTEX_POINT('',#110805); +#110805 = CARTESIAN_POINT('',(-6.585,3.117589292885,-1.462678558785)); +#110806 = LINE('',#110807,#110808); +#110807 = CARTESIAN_POINT('',(-6.585,3.219514052499,-1.535156867823)); +#110808 = VECTOR('',#110809,1.); +#110809 = DIRECTION('',(0.,-0.814961064527,0.579515714459)); +#110810 = ORIENTED_EDGE('',*,*,#110811,.T.); +#110811 = EDGE_CURVE('',#110804,#110812,#110814,.T.); +#110812 = VERTEX_POINT('',#110813); +#110813 = CARTESIAN_POINT('',(-6.585,3.078346365008,-1.409201385868)); +#110814 = LINE('',#110815,#110816); +#110815 = CARTESIAN_POINT('',(-6.585,3.117589292885,-1.462678558785)); +#110816 = VECTOR('',#110817,1.); +#110817 = DIRECTION('',(0.,-0.591621807428,0.806215626849)); +#110818 = ORIENTED_EDGE('',*,*,#110819,.T.); +#110819 = EDGE_CURVE('',#110812,#110820,#110822,.T.); +#110820 = VERTEX_POINT('',#110821); +#110821 = CARTESIAN_POINT('',(-6.585,3.070444353802,-1.365224844454)); +#110822 = LINE('',#110823,#110824); +#110823 = CARTESIAN_POINT('',(-6.585,3.078346365008,-1.409201385868)); +#110824 = VECTOR('',#110825,1.); +#110825 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#110826 = ORIENTED_EDGE('',*,*,#110827,.T.); +#110827 = EDGE_CURVE('',#110820,#110828,#110830,.T.); +#110828 = VERTEX_POINT('',#110829); +#110829 = CARTESIAN_POINT('',(-6.585,3.076895785108,-1.318669176535)); +#110830 = LINE('',#110831,#110832); +#110831 = CARTESIAN_POINT('',(-6.585,3.070444353802,-1.365224844454)); +#110832 = VECTOR('',#110833,1.); +#110833 = DIRECTION('',(0.,0.137262905725,0.99053465094)); +#110834 = ORIENTED_EDGE('',*,*,#110835,.T.); +#110835 = EDGE_CURVE('',#110828,#110836,#110838,.T.); +#110836 = VERTEX_POINT('',#110837); +#110837 = CARTESIAN_POINT('',(-6.585,3.097700699991,-1.269534374732)); +#110838 = LINE('',#110839,#110840); +#110839 = CARTESIAN_POINT('',(-6.585,3.076895785108,-1.318669176535)); +#110840 = VECTOR('',#110841,1.); +#110841 = DIRECTION('',(0.,0.389912020644,0.920852114162)); +#110842 = ORIENTED_EDGE('',*,*,#110843,.T.); +#110843 = EDGE_CURVE('',#110836,#110844,#110846,.T.); +#110844 = VERTEX_POINT('',#110845); +#110845 = CARTESIAN_POINT('',(-6.585,3.123773601812,-1.249717270894)); +#110846 = LINE('',#110847,#110848); +#110847 = CARTESIAN_POINT('',(-6.585,3.097700699991,-1.269534374732)); +#110848 = VECTOR('',#110849,1.); +#110849 = DIRECTION('',(0.,0.796137209037,0.605116141238)); +#110850 = ORIENTED_EDGE('',*,*,#110851,.T.); +#110851 = EDGE_CURVE('',#110844,#110852,#110854,.T.); +#110852 = VERTEX_POINT('',#110853); +#110853 = CARTESIAN_POINT('',(-6.585,3.164199966678,-1.227321036861)); +#110854 = LINE('',#110855,#110856); +#110855 = CARTESIAN_POINT('',(-6.585,3.123773601812,-1.249717270894)); +#110856 = VECTOR('',#110857,1.); +#110857 = DIRECTION('',(0.,0.874734056587,0.484603270983)); +#110858 = ORIENTED_EDGE('',*,*,#110859,.T.); +#110859 = EDGE_CURVE('',#110852,#110860,#110862,.T.); +#110860 = VERTEX_POINT('',#110861); +#110861 = CARTESIAN_POINT('',(-6.585,3.192906872234,-1.222162780161)); +#110862 = LINE('',#110863,#110864); +#110863 = CARTESIAN_POINT('',(-6.585,3.164199966678,-1.227321036861)); +#110864 = VECTOR('',#110865,1.); +#110865 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#110866 = ORIENTED_EDGE('',*,*,#110867,.T.); +#110867 = EDGE_CURVE('',#110860,#110868,#110870,.T.); +#110868 = VERTEX_POINT('',#110869); +#110869 = CARTESIAN_POINT('',(-6.585,3.238601254837,-1.229084238559)); +#110870 = LINE('',#110871,#110872); +#110871 = CARTESIAN_POINT('',(-6.585,3.192906872234,-1.222162780161)); +#110872 = VECTOR('',#110873,1.); +#110873 = DIRECTION('',(0.,0.988721698083,-0.149764494255)); +#110874 = ORIENTED_EDGE('',*,*,#110875,.T.); +#110875 = EDGE_CURVE('',#110868,#110876,#110878,.T.); +#110876 = VERTEX_POINT('',#110877); +#110877 = CARTESIAN_POINT('',(-6.585,3.269942164128,-1.238584828997)); +#110878 = LINE('',#110879,#110880); +#110879 = CARTESIAN_POINT('',(-6.585,3.238601254837,-1.229084238559)); +#110880 = VECTOR('',#110881,1.); +#110881 = DIRECTION('',(0.,0.9569960499,-0.290100948767)); +#110882 = ORIENTED_EDGE('',*,*,#110883,.T.); +#110883 = EDGE_CURVE('',#110876,#110884,#110886,.T.); +#110884 = VERTEX_POINT('',#110885); +#110885 = CARTESIAN_POINT('',(-6.585,3.306551091157,-1.277403111866)); +#110886 = LINE('',#110887,#110888); +#110887 = CARTESIAN_POINT('',(-6.585,3.269942164128,-1.238584828997)); +#110888 = VECTOR('',#110889,1.); +#110889 = DIRECTION('',(0.,0.686100487162,-0.727506784515)); +#110890 = ORIENTED_EDGE('',*,*,#110891,.T.); +#110891 = EDGE_CURVE('',#110884,#110892,#110894,.T.); +#110892 = VERTEX_POINT('',#110893); +#110893 = CARTESIAN_POINT('',(-6.585,3.328806560274,-1.318800524007)); +#110894 = LINE('',#110895,#110896); +#110895 = CARTESIAN_POINT('',(-6.585,3.306551091157,-1.277403111866)); +#110896 = VECTOR('',#110897,1.); +#110897 = DIRECTION('',(0.,0.4735150851,-0.880785708435)); +#110898 = ORIENTED_EDGE('',*,*,#110899,.T.); +#110899 = EDGE_CURVE('',#110892,#110900,#110902,.T.); +#110900 = VERTEX_POINT('',#110901); +#110901 = CARTESIAN_POINT('',(-6.585,3.33670857148,-1.362777065421)); +#110902 = LINE('',#110903,#110904); +#110903 = CARTESIAN_POINT('',(-6.585,3.328806560274,-1.318800524007)); +#110904 = VECTOR('',#110905,1.); +#110905 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#110906 = ORIENTED_EDGE('',*,*,#110907,.T.); +#110907 = EDGE_CURVE('',#110900,#110908,#110910,.T.); +#110908 = VERTEX_POINT('',#110909); +#110909 = CARTESIAN_POINT('',(-6.585,3.318537683111,-1.426570752661)); +#110910 = LINE('',#110911,#110912); +#110911 = CARTESIAN_POINT('',(-6.585,3.33670857148,-1.362777065421)); +#110912 = VECTOR('',#110913,1.); +#110913 = DIRECTION('',(0.,-0.27394218601,-0.961746161273)); +#110914 = ORIENTED_EDGE('',*,*,#110915,.T.); +#110915 = EDGE_CURVE('',#110908,#110916,#110918,.T.); +#110916 = VERTEX_POINT('',#110917); +#110917 = CARTESIAN_POINT('',(-6.585,3.288647333187,-1.507602375245)); +#110918 = LINE('',#110919,#110920); +#110919 = CARTESIAN_POINT('',(-6.585,3.318537683111,-1.426570752661)); +#110920 = VECTOR('',#110921,1.); +#110921 = DIRECTION('',(0.,-0.346078392209,-0.93820559924)); +#110922 = ORIENTED_EDGE('',*,*,#110923,.T.); +#110923 = EDGE_CURVE('',#110916,#110626,#110924,.T.); +#110924 = LINE('',#110925,#110926); +#110925 = CARTESIAN_POINT('',(-6.585,3.288647333187,-1.507602375245)); +#110926 = VECTOR('',#110927,1.); +#110927 = DIRECTION('',(0.,0.81496104726,-0.579515738741)); +#110928 = FACE_BOUND('',#110929,.T.); +#110929 = EDGE_LOOP('',(#110930,#110940,#110948,#110956,#110964,#110972, + #110980,#110988,#110996,#111004,#111012)); +#110930 = ORIENTED_EDGE('',*,*,#110931,.T.); +#110931 = EDGE_CURVE('',#110932,#110934,#110936,.T.); +#110932 = VERTEX_POINT('',#110933); +#110933 = CARTESIAN_POINT('',(-6.585,3.248755235576,-1.86280979749)); +#110934 = VERTEX_POINT('',#110935); +#110935 = CARTESIAN_POINT('',(-6.585,3.306169046689,-1.852493284089)); +#110936 = LINE('',#110937,#110938); +#110937 = CARTESIAN_POINT('',(-6.585,3.248755235576,-1.86280979749)); +#110938 = VECTOR('',#110939,1.); +#110939 = DIRECTION('',(0.,0.98423699659,0.176854557597)); +#110940 = ORIENTED_EDGE('',*,*,#110941,.T.); +#110941 = EDGE_CURVE('',#110934,#110942,#110944,.T.); +#110942 = VERTEX_POINT('',#110943); +#110943 = CARTESIAN_POINT('',(-6.585,3.346595420898,-1.830097043079)); +#110944 = LINE('',#110945,#110946); +#110945 = CARTESIAN_POINT('',(-6.585,3.306169046689,-1.852493284089)); +#110946 = VECTOR('',#110947,1.); +#110947 = DIRECTION('',(0.,0.874734040064,0.484603300806)); +#110948 = ORIENTED_EDGE('',*,*,#110949,.T.); +#110949 = EDGE_CURVE('',#110942,#110950,#110952,.T.); +#110950 = VERTEX_POINT('',#110951); +#110951 = CARTESIAN_POINT('',(-6.585,3.384387782028,-1.793041961908)); +#110952 = LINE('',#110953,#110954); +#110953 = CARTESIAN_POINT('',(-6.585,3.346595420898,-1.830097043079)); +#110954 = VECTOR('',#110955,1.); +#110955 = DIRECTION('',(0.,0.714037450385,0.700107505636)); +#110956 = ORIENTED_EDGE('',*,*,#110957,.T.); +#110957 = EDGE_CURVE('',#110950,#110958,#110960,.T.); +#110958 = VERTEX_POINT('',#110959); +#110959 = CARTESIAN_POINT('',(-6.585,3.407826683402,-1.758565999743)); +#110960 = LINE('',#110961,#110962); +#110961 = CARTESIAN_POINT('',(-6.585,3.384387782028,-1.793041961908)); +#110962 = VECTOR('',#110963,1.); +#110963 = DIRECTION('',(0.,0.562232059119,0.826979511052)); +#110964 = ORIENTED_EDGE('',*,*,#110965,.T.); +#110965 = EDGE_CURVE('',#110958,#110966,#110968,.T.); +#110966 = VERTEX_POINT('',#110967); +#110967 = CARTESIAN_POINT('',(-6.585,3.41691212871,-1.726669177117)); +#110968 = LINE('',#110969,#110970); +#110969 = CARTESIAN_POINT('',(-6.585,3.407826683402,-1.758565999743)); +#110970 = VECTOR('',#110971,1.); +#110971 = DIRECTION('',(0.,0.273942384099,0.96174610485)); +#110972 = ORIENTED_EDGE('',*,*,#110973,.T.); +#110973 = EDGE_CURVE('',#110966,#110974,#110976,.T.); +#110974 = VERTEX_POINT('',#110975); +#110975 = CARTESIAN_POINT('',(-6.585,3.409010117504,-1.682692635704)); +#110976 = LINE('',#110977,#110978); +#110977 = CARTESIAN_POINT('',(-6.585,3.41691212871,-1.726669177117)); +#110978 = VECTOR('',#110979,1.); +#110979 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#110980 = ORIENTED_EDGE('',*,*,#110981,.T.); +#110981 = EDGE_CURVE('',#110974,#110982,#110984,.T.); +#110982 = VERTEX_POINT('',#110983); +#110983 = CARTESIAN_POINT('',(-6.585,3.372401195608,-1.643874351912)); +#110984 = LINE('',#110985,#110986); +#110985 = CARTESIAN_POINT('',(-6.585,3.409010117504,-1.682692635704)); +#110986 = VECTOR('',#110987,1.); +#110987 = DIRECTION('',(0.,-0.686100427617,0.727506840672)); +#110988 = ORIENTED_EDGE('',*,*,#110989,.T.); +#110989 = EDGE_CURVE('',#110982,#110990,#110992,.T.); +#110990 = VERTEX_POINT('',#110991); +#110991 = CARTESIAN_POINT('',(-6.585,3.270476432305,-1.571396022342)); +#110992 = LINE('',#110993,#110994); +#110993 = CARTESIAN_POINT('',(-6.585,3.372401195608,-1.643874351912)); +#110994 = VECTOR('',#110995,1.); +#110995 = DIRECTION('',(0.,-0.814960996898,0.579515809565)); +#110996 = ORIENTED_EDGE('',*,*,#110997,.T.); +#110997 = EDGE_CURVE('',#110990,#110998,#111000,.T.); +#110998 = VERTEX_POINT('',#110999); +#110999 = CARTESIAN_POINT('',(-6.585,3.157366489981,-1.84896687187)); +#111000 = LINE('',#111001,#111002); +#111001 = CARTESIAN_POINT('',(-6.585,3.270476432305,-1.571396022342)); +#111002 = VECTOR('',#111003,1.); +#111003 = DIRECTION('',(0.,-0.377369914624,-0.926062604545)); +#111004 = ORIENTED_EDGE('',*,*,#111005,.T.); +#111005 = EDGE_CURVE('',#110998,#111006,#111008,.T.); +#111006 = VERTEX_POINT('',#111007); +#111007 = CARTESIAN_POINT('',(-6.585,3.188707399273,-1.858467462308)); +#111008 = LINE('',#111009,#111010); +#111009 = CARTESIAN_POINT('',(-6.585,3.157366489981,-1.84896687187)); +#111010 = VECTOR('',#111011,1.); +#111011 = DIRECTION('',(0.,0.9569960499,-0.290100948767)); +#111012 = ORIENTED_EDGE('',*,*,#111013,.T.); +#111013 = EDGE_CURVE('',#111006,#110932,#111014,.T.); +#111014 = LINE('',#111015,#111016); +#111015 = CARTESIAN_POINT('',(-6.585,3.188707399273,-1.858467462308)); +#111016 = VECTOR('',#111017,1.); +#111017 = DIRECTION('',(0.,0.997395509915,-7.212625598476E-02)); +#111018 = FACE_BOUND('',#111019,.T.); +#111019 = EDGE_LOOP('',(#111020,#111030,#111038,#111046,#111054,#111062, + #111070,#111078,#111086,#111094,#111102,#111110)); +#111020 = ORIENTED_EDGE('',*,*,#111021,.T.); +#111021 = EDGE_CURVE('',#111022,#111024,#111026,.T.); +#111022 = VERTEX_POINT('',#111023); +#111023 = CARTESIAN_POINT('',(-6.585,3.25848984773,-1.422228422613)); +#111024 = VERTEX_POINT('',#111025); +#111025 = CARTESIAN_POINT('',(-6.585,3.276660741233,-1.358434734451)); +#111026 = LINE('',#111027,#111028); +#111027 = CARTESIAN_POINT('',(-6.585,3.25848984773,-1.422228422613)); +#111028 = VECTOR('',#111029,1.); +#111029 = DIRECTION('',(0.,0.273942253926,0.961746141928)); +#111030 = ORIENTED_EDGE('',*,*,#111031,.T.); +#111031 = EDGE_CURVE('',#111024,#111032,#111034,.T.); +#111032 = VERTEX_POINT('',#111033); +#111033 = CARTESIAN_POINT('',(-6.585,3.271392733762,-1.329117040175)); +#111034 = LINE('',#111035,#111036); +#111035 = CARTESIAN_POINT('',(-6.585,3.276660741233,-1.358434734451)); +#111036 = VECTOR('',#111037,1.); +#111037 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#111038 = ORIENTED_EDGE('',*,*,#111039,.T.); +#111039 = EDGE_CURVE('',#111032,#111040,#111042,.T.); +#111040 = VERTEX_POINT('',#111041); +#111041 = CARTESIAN_POINT('',(-6.585,3.251771273513,-1.302378474249)); +#111042 = LINE('',#111043,#111044); +#111043 = CARTESIAN_POINT('',(-6.585,3.271392733762,-1.329117040175)); +#111044 = VECTOR('',#111045,1.); +#111045 = DIRECTION('',(0.,-0.591622030416,0.806215463215)); +#111046 = ORIENTED_EDGE('',*,*,#111047,.T.); +#111047 = EDGE_CURVE('',#111040,#111048,#111050,.T.); +#111048 = VERTEX_POINT('',#111049); +#111049 = CARTESIAN_POINT('',(-6.585,3.234783806733,-1.290298757306)); +#111050 = LINE('',#111051,#111052); +#111051 = CARTESIAN_POINT('',(-6.585,3.251771273513,-1.302378474249)); +#111052 = VECTOR('',#111053,1.); +#111053 = DIRECTION('',(0.,-0.814961202664,0.5795155202)); +#111054 = ORIENTED_EDGE('',*,*,#111055,.T.); +#111055 = EDGE_CURVE('',#111048,#111056,#111058,.T.); +#111056 = VERTEX_POINT('',#111057); +#111057 = CARTESIAN_POINT('',(-6.585,3.203442887175,-1.280798168713)); +#111058 = LINE('',#111059,#111060); +#111059 = CARTESIAN_POINT('',(-6.585,3.234783806733,-1.290298757306)); +#111060 = VECTOR('',#111061,1.); +#111061 = DIRECTION('',(0.,-0.956996091921,0.290100810147)); +#111062 = ORIENTED_EDGE('',*,*,#111063,.T.); +#111063 = EDGE_CURVE('',#111056,#111064,#111066,.T.); +#111064 = VERTEX_POINT('',#111065); +#111065 = CARTESIAN_POINT('',(-6.585,3.174735981619,-1.285956425413)); +#111066 = LINE('',#111067,#111068); +#111067 = CARTESIAN_POINT('',(-6.585,3.203442887175,-1.280798168713)); +#111068 = VECTOR('',#111069,1.); +#111069 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#111070 = ORIENTED_EDGE('',*,*,#111071,.T.); +#111071 = EDGE_CURVE('',#111064,#111072,#111074,.T.); +#111072 = VERTEX_POINT('',#111073); +#111073 = CARTESIAN_POINT('',(-6.585,3.148663079798,-1.305773529251)); +#111074 = LINE('',#111075,#111076); +#111075 = CARTESIAN_POINT('',(-6.585,3.174735981619,-1.285956425413)); +#111076 = VECTOR('',#111077,1.); +#111077 = DIRECTION('',(0.,-0.796137209037,-0.605116141238)); +#111078 = ORIENTED_EDGE('',*,*,#111079,.T.); +#111079 = EDGE_CURVE('',#111072,#111080,#111082,.T.); +#111080 = VERTEX_POINT('',#111081); +#111081 = CARTESIAN_POINT('',(-6.585,3.127858164915,-1.354908331054)); +#111082 = LINE('',#111083,#111084); +#111083 = CARTESIAN_POINT('',(-6.585,3.148663079798,-1.305773529251)); +#111084 = VECTOR('',#111085,1.); +#111085 = DIRECTION('',(0.,-0.389912020644,-0.920852114162)); +#111086 = ORIENTED_EDGE('',*,*,#111087,.T.); +#111087 = EDGE_CURVE('',#111080,#111088,#111090,.T.); +#111088 = VERTEX_POINT('',#111089); +#111089 = CARTESIAN_POINT('',(-6.585,3.133126172386,-1.38422602533)); +#111090 = LINE('',#111091,#111092); +#111091 = CARTESIAN_POINT('',(-6.585,3.127858164915,-1.354908331054)); +#111092 = VECTOR('',#111093,1.); +#111093 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#111094 = ORIENTED_EDGE('',*,*,#111095,.T.); +#111095 = EDGE_CURVE('',#111088,#111096,#111098,.T.); +#111096 = VERTEX_POINT('',#111097); +#111097 = CARTESIAN_POINT('',(-6.585,3.16973511706,-1.42304434742)); +#111098 = LINE('',#111099,#111100); +#111099 = CARTESIAN_POINT('',(-6.585,3.133126172386,-1.38422602533)); +#111100 = VECTOR('',#111101,1.); +#111101 = DIRECTION('',(0.,0.686100295294,-0.727506965463)); +#111102 = ORIENTED_EDGE('',*,*,#111103,.T.); +#111103 = EDGE_CURVE('',#111096,#111104,#111106,.T.); +#111104 = VERTEX_POINT('',#111105); +#111105 = CARTESIAN_POINT('',(-6.585,3.237684943114,-1.471363222571)); +#111106 = LINE('',#111107,#111108); +#111107 = CARTESIAN_POINT('',(-6.585,3.16973511706,-1.42304434742)); +#111108 = VECTOR('',#111109,1.); +#111109 = DIRECTION('',(0.,0.814960995459,-0.579515811588)); +#111110 = ORIENTED_EDGE('',*,*,#111111,.T.); +#111111 = EDGE_CURVE('',#111104,#111022,#111112,.T.); +#111112 = LINE('',#111113,#111114); +#111113 = CARTESIAN_POINT('',(-6.585,3.237684943114,-1.471363222571)); +#111114 = VECTOR('',#111115,1.); +#111115 = DIRECTION('',(0.,0.389911869903,0.92085217799)); +#111116 = PLANE('',#111117); +#111117 = AXIS2_PLACEMENT_3D('',#111118,#111119,#111120); +#111118 = CARTESIAN_POINT('',(-6.585,0.,0.)); +#111119 = DIRECTION('',(-1.,0.,0.)); +#111120 = DIRECTION('',(0.,0.,1.)); +#111121 = ADVANCED_FACE('',(#111122),#111138,.T.); +#111122 = FACE_BOUND('',#111123,.T.); +#111123 = EDGE_LOOP('',(#111124,#111130,#111131,#111137)); +#111124 = ORIENTED_EDGE('',*,*,#111125,.T.); +#111125 = EDGE_CURVE('',#107582,#109400,#111126,.T.); +#111126 = LINE('',#111127,#111128); +#111127 = CARTESIAN_POINT('',(-6.575,2.754038414073,-1.9106)); +#111128 = VECTOR('',#111129,1.); +#111129 = DIRECTION('',(-1.,0.,0.)); +#111130 = ORIENTED_EDGE('',*,*,#109489,.F.); +#111131 = ORIENTED_EDGE('',*,*,#111132,.F.); +#111132 = EDGE_CURVE('',#107502,#109482,#111133,.T.); +#111133 = LINE('',#111134,#111135); +#111134 = CARTESIAN_POINT('',(-6.575,2.92784455688,-1.9106)); +#111135 = VECTOR('',#111136,1.); +#111136 = DIRECTION('',(-1.,0.,0.)); +#111137 = ORIENTED_EDGE('',*,*,#107589,.T.); +#111138 = PLANE('',#111139); +#111139 = AXIS2_PLACEMENT_3D('',#111140,#111141,#111142); +#111140 = CARTESIAN_POINT('',(-6.575,2.92784455688,-1.9106)); +#111141 = DIRECTION('',(0.,0.,-1.)); +#111142 = DIRECTION('',(0.,-1.,0.)); +#111143 = ADVANCED_FACE('',(#111144),#111155,.T.); +#111144 = FACE_BOUND('',#111145,.T.); +#111145 = EDGE_LOOP('',(#111146,#111147,#111148,#111154)); +#111146 = ORIENTED_EDGE('',*,*,#111132,.T.); +#111147 = ORIENTED_EDGE('',*,*,#109481,.F.); +#111148 = ORIENTED_EDGE('',*,*,#111149,.F.); +#111149 = EDGE_CURVE('',#107500,#109474,#111150,.T.); +#111150 = LINE('',#111151,#111152); +#111151 = CARTESIAN_POINT('',(-6.575,2.65649403007,-0.6106)); +#111152 = VECTOR('',#111153,1.); +#111153 = DIRECTION('',(-1.,0.,0.)); +#111154 = ORIENTED_EDGE('',*,*,#107499,.T.); +#111155 = PLANE('',#111156); +#111156 = AXIS2_PLACEMENT_3D('',#111157,#111158,#111159); +#111157 = CARTESIAN_POINT('',(-6.575,2.65649403007,-0.6106)); +#111158 = DIRECTION('',(-0.,0.978902588641,0.204327487018)); +#111159 = DIRECTION('',(1.,0.,0.)); +#111160 = ADVANCED_FACE('',(#111161),#111172,.T.); +#111161 = FACE_BOUND('',#111162,.T.); +#111162 = EDGE_LOOP('',(#111163,#111164,#111165,#111171)); +#111163 = ORIENTED_EDGE('',*,*,#111149,.T.); +#111164 = ORIENTED_EDGE('',*,*,#109473,.F.); +#111165 = ORIENTED_EDGE('',*,*,#111166,.F.); +#111166 = EDGE_CURVE('',#107510,#109466,#111167,.T.); +#111167 = LINE('',#111168,#111169); +#111168 = CARTESIAN_POINT('',(-6.575,2.482687732291,-0.6106)); +#111169 = VECTOR('',#111170,1.); +#111170 = DIRECTION('',(-1.,0.,0.)); +#111171 = ORIENTED_EDGE('',*,*,#107509,.T.); +#111172 = PLANE('',#111173); +#111173 = AXIS2_PLACEMENT_3D('',#111174,#111175,#111176); +#111174 = CARTESIAN_POINT('',(-6.575,2.482687732291,-0.6106)); +#111175 = DIRECTION('',(0.,0.,1.)); +#111176 = DIRECTION('',(1.,0.,-0.)); +#111177 = ADVANCED_FACE('',(#111178),#111189,.T.); +#111178 = FACE_BOUND('',#111179,.T.); +#111179 = EDGE_LOOP('',(#111180,#111181,#111182,#111188)); +#111180 = ORIENTED_EDGE('',*,*,#111166,.T.); +#111181 = ORIENTED_EDGE('',*,*,#109465,.F.); +#111182 = ORIENTED_EDGE('',*,*,#111183,.F.); +#111183 = EDGE_CURVE('',#107518,#109458,#111184,.T.); +#111184 = LINE('',#111185,#111186); +#111185 = CARTESIAN_POINT('',(-6.575,2.613042494369,-1.23665727911)); +#111186 = VECTOR('',#111187,1.); +#111187 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#111188 = ORIENTED_EDGE('',*,*,#107517,.T.); +#111189 = PLANE('',#111190); +#111190 = AXIS2_PLACEMENT_3D('',#111191,#111192,#111193); +#111191 = CARTESIAN_POINT('',(-6.575,2.613042494369,-1.23665727911)); +#111192 = DIRECTION('',(0.,-0.979003467962,-0.203843591309)); +#111193 = DIRECTION('',(0.,0.203843591309,-0.979003467962)); +#111194 = ADVANCED_FACE('',(#111195),#111206,.T.); +#111195 = FACE_BOUND('',#111196,.T.); +#111196 = EDGE_LOOP('',(#111197,#111198,#111199,#111205)); +#111197 = ORIENTED_EDGE('',*,*,#111183,.T.); +#111198 = ORIENTED_EDGE('',*,*,#109457,.F.); +#111199 = ORIENTED_EDGE('',*,*,#111200,.F.); +#111200 = EDGE_CURVE('',#107526,#109450,#111201,.T.); +#111201 = LINE('',#111202,#111203); +#111202 = CARTESIAN_POINT('',(-6.575,1.907176145625,-0.6106)); +#111203 = VECTOR('',#111204,1.); +#111204 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111205 = ORIENTED_EDGE('',*,*,#107525,.T.); +#111206 = PLANE('',#111207); +#111207 = AXIS2_PLACEMENT_3D('',#111208,#111209,#111210); +#111208 = CARTESIAN_POINT('',(-6.575,1.907176145625,-0.6106)); +#111209 = DIRECTION('',(-0.,0.6635466936,0.748134871138)); +#111210 = DIRECTION('',(1.,0.,0.)); +#111211 = ADVANCED_FACE('',(#111212),#111223,.T.); +#111212 = FACE_BOUND('',#111213,.T.); +#111213 = EDGE_LOOP('',(#111214,#111215,#111216,#111222)); +#111214 = ORIENTED_EDGE('',*,*,#111200,.T.); +#111215 = ORIENTED_EDGE('',*,*,#109449,.F.); +#111216 = ORIENTED_EDGE('',*,*,#111217,.F.); +#111217 = EDGE_CURVE('',#107534,#109442,#111218,.T.); +#111218 = LINE('',#111219,#111220); +#111219 = CARTESIAN_POINT('',(-6.575,1.662428435397,-0.6106)); +#111220 = VECTOR('',#111221,1.); +#111221 = DIRECTION('',(-1.,0.,0.)); +#111222 = ORIENTED_EDGE('',*,*,#107533,.T.); +#111223 = PLANE('',#111224); +#111224 = AXIS2_PLACEMENT_3D('',#111225,#111226,#111227); +#111225 = CARTESIAN_POINT('',(-6.575,1.662428435397,-0.6106)); +#111226 = DIRECTION('',(0.,0.,1.)); +#111227 = DIRECTION('',(1.,0.,-0.)); +#111228 = ADVANCED_FACE('',(#111229),#111240,.T.); +#111229 = FACE_BOUND('',#111230,.T.); +#111230 = EDGE_LOOP('',(#111231,#111232,#111233,#111239)); +#111231 = ORIENTED_EDGE('',*,*,#111217,.T.); +#111232 = ORIENTED_EDGE('',*,*,#109441,.F.); +#111233 = ORIENTED_EDGE('',*,*,#111234,.F.); +#111234 = EDGE_CURVE('',#107542,#109434,#111235,.T.); +#111235 = LINE('',#111236,#111237); +#111236 = CARTESIAN_POINT('',(-6.575,2.266316649032,-1.139999722815)); +#111237 = VECTOR('',#111238,1.); +#111238 = DIRECTION('',(-1.,0.,0.)); +#111239 = ORIENTED_EDGE('',*,*,#107541,.T.); +#111240 = PLANE('',#111241); +#111241 = AXIS2_PLACEMENT_3D('',#111242,#111243,#111244); +#111242 = CARTESIAN_POINT('',(-6.575,2.266316649032,-1.139999722815)); +#111243 = DIRECTION('',(0.,-0.659207827607,-0.751960796865)); +#111244 = DIRECTION('',(0.,-0.751960796865,0.659207827607)); +#111245 = ADVANCED_FACE('',(#111246),#111257,.T.); +#111246 = FACE_BOUND('',#111247,.T.); +#111247 = EDGE_LOOP('',(#111248,#111249,#111250,#111256)); +#111248 = ORIENTED_EDGE('',*,*,#111234,.T.); +#111249 = ORIENTED_EDGE('',*,*,#109433,.F.); +#111250 = ORIENTED_EDGE('',*,*,#111251,.F.); +#111251 = EDGE_CURVE('',#107550,#109426,#111252,.T.); +#111252 = LINE('',#111253,#111254); +#111253 = CARTESIAN_POINT('',(-6.575,1.823820075107,-1.9106)); +#111254 = VECTOR('',#111255,1.); +#111255 = DIRECTION('',(-1.,0.,0.)); +#111256 = ORIENTED_EDGE('',*,*,#107549,.T.); +#111257 = PLANE('',#111258); +#111258 = AXIS2_PLACEMENT_3D('',#111259,#111260,#111261); +#111259 = CARTESIAN_POINT('',(-6.575,1.823820075107,-1.9106)); +#111260 = DIRECTION('',(0.,-0.867197245089,0.497964796055)); +#111261 = DIRECTION('',(-1.,0.,0.)); +#111262 = ADVANCED_FACE('',(#111263),#111274,.T.); +#111263 = FACE_BOUND('',#111264,.T.); +#111264 = EDGE_LOOP('',(#111265,#111266,#111267,#111273)); +#111265 = ORIENTED_EDGE('',*,*,#111251,.T.); +#111266 = ORIENTED_EDGE('',*,*,#109425,.F.); +#111267 = ORIENTED_EDGE('',*,*,#111268,.F.); +#111268 = EDGE_CURVE('',#107558,#109418,#111269,.T.); +#111269 = LINE('',#111270,#111271); +#111270 = CARTESIAN_POINT('',(-6.575,2.018022092891,-1.9106)); +#111271 = VECTOR('',#111272,1.); +#111272 = DIRECTION('',(-1.,0.,0.)); +#111273 = ORIENTED_EDGE('',*,*,#107557,.T.); +#111274 = PLANE('',#111275); +#111275 = AXIS2_PLACEMENT_3D('',#111276,#111277,#111278); +#111276 = CARTESIAN_POINT('',(-6.575,2.018022092891,-1.9106)); +#111277 = DIRECTION('',(0.,0.,-1.)); +#111278 = DIRECTION('',(0.,-1.,0.)); +#111279 = ADVANCED_FACE('',(#111280),#111291,.T.); +#111280 = FACE_BOUND('',#111281,.T.); +#111281 = EDGE_LOOP('',(#111282,#111283,#111284,#111290)); +#111282 = ORIENTED_EDGE('',*,*,#111268,.T.); +#111283 = ORIENTED_EDGE('',*,*,#109417,.F.); +#111284 = ORIENTED_EDGE('',*,*,#111285,.F.); +#111285 = EDGE_CURVE('',#107566,#109410,#111286,.T.); +#111286 = LINE('',#111287,#111288); +#111287 = CARTESIAN_POINT('',(-6.575,2.393124255252,-1.251732342815)); +#111288 = VECTOR('',#111289,1.); +#111289 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#111290 = ORIENTED_EDGE('',*,*,#107565,.T.); +#111291 = PLANE('',#111292); +#111292 = AXIS2_PLACEMENT_3D('',#111293,#111294,#111295); +#111293 = CARTESIAN_POINT('',(-6.575,2.393124255252,-1.251732342815)); +#111294 = DIRECTION('',(0.,0.869033870678,-0.49475259637)); +#111295 = DIRECTION('',(-1.,0.,0.)); +#111296 = ADVANCED_FACE('',(#111297),#111308,.T.); +#111297 = FACE_BOUND('',#111298,.T.); +#111298 = EDGE_LOOP('',(#111299,#111300,#111301,#111307)); +#111299 = ORIENTED_EDGE('',*,*,#111285,.T.); +#111300 = ORIENTED_EDGE('',*,*,#109409,.F.); +#111301 = ORIENTED_EDGE('',*,*,#111302,.F.); +#111302 = EDGE_CURVE('',#107574,#109402,#111303,.T.); +#111303 = LINE('',#111304,#111305); +#111304 = CARTESIAN_POINT('',(-6.575,2.665361687255,-1.488499029851)); +#111305 = VECTOR('',#111306,1.); +#111306 = DIRECTION('',(-1.,-4.440892098501E-14,2.220446049251E-14)); +#111307 = ORIENTED_EDGE('',*,*,#107573,.T.); +#111308 = PLANE('',#111309); +#111309 = AXIS2_PLACEMENT_3D('',#111310,#111311,#111312); +#111310 = CARTESIAN_POINT('',(-6.575,2.665361687255,-1.488499029851)); +#111311 = DIRECTION('',(0.,-0.656239453039,-0.754552702119)); +#111312 = DIRECTION('',(0.,-0.754552702119,0.656239453039)); +#111313 = ADVANCED_FACE('',(#111314),#111320,.T.); +#111314 = FACE_BOUND('',#111315,.T.); +#111315 = EDGE_LOOP('',(#111316,#111317,#111318,#111319)); +#111316 = ORIENTED_EDGE('',*,*,#111302,.T.); +#111317 = ORIENTED_EDGE('',*,*,#109399,.F.); +#111318 = ORIENTED_EDGE('',*,*,#111125,.F.); +#111319 = ORIENTED_EDGE('',*,*,#107581,.T.); +#111320 = PLANE('',#111321); +#111321 = AXIS2_PLACEMENT_3D('',#111322,#111323,#111324); +#111322 = CARTESIAN_POINT('',(-6.575,2.754038414073,-1.9106)); +#111323 = DIRECTION('',(0.,-0.978636928358,-0.205596114881)); +#111324 = DIRECTION('',(0.,0.205596114881,-0.978636928358)); +#111325 = ADVANCED_FACE('',(#111326),#111342,.T.); +#111326 = FACE_BOUND('',#111327,.T.); +#111327 = EDGE_LOOP('',(#111328,#111334,#111335,#111341)); +#111328 = ORIENTED_EDGE('',*,*,#111329,.T.); +#111329 = EDGE_CURVE('',#107808,#109504,#111330,.T.); +#111330 = LINE('',#111331,#111332); +#111331 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.8495)); +#111332 = VECTOR('',#111333,1.); +#111333 = DIRECTION('',(-1.,0.,0.)); +#111334 = ORIENTED_EDGE('',*,*,#109721,.F.); +#111335 = ORIENTED_EDGE('',*,*,#111336,.F.); +#111336 = EDGE_CURVE('',#107600,#109714,#111337,.T.); +#111337 = LINE('',#111338,#111339); +#111338 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.711202124774)); +#111339 = VECTOR('',#111340,1.); +#111340 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#111341 = ORIENTED_EDGE('',*,*,#107815,.T.); +#111342 = PLANE('',#111343); +#111343 = AXIS2_PLACEMENT_3D('',#111344,#111345,#111346); +#111344 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.711202124774)); +#111345 = DIRECTION('',(-0.,1.,0.)); +#111346 = DIRECTION('',(1.,0.,0.)); +#111347 = ADVANCED_FACE('',(#111348),#111359,.T.); +#111348 = FACE_BOUND('',#111349,.T.); +#111349 = EDGE_LOOP('',(#111350,#111351,#111352,#111358)); +#111350 = ORIENTED_EDGE('',*,*,#111336,.T.); +#111351 = ORIENTED_EDGE('',*,*,#109713,.F.); +#111352 = ORIENTED_EDGE('',*,*,#111353,.F.); +#111353 = EDGE_CURVE('',#107598,#109706,#111354,.T.); +#111354 = LINE('',#111355,#111356); +#111355 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-1.01971278739)); +#111356 = VECTOR('',#111357,1.); +#111357 = DIRECTION('',(-1.,0.,0.)); +#111358 = ORIENTED_EDGE('',*,*,#107597,.T.); +#111359 = PLANE('',#111360); +#111360 = AXIS2_PLACEMENT_3D('',#111361,#111362,#111363); +#111361 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-1.01971278739)); +#111362 = DIRECTION('',(-0.,0.673789927736,0.738922954902)); +#111363 = DIRECTION('',(1.,0.,0.)); +#111364 = ADVANCED_FACE('',(#111365),#111376,.T.); +#111365 = FACE_BOUND('',#111366,.T.); +#111366 = EDGE_LOOP('',(#111367,#111368,#111369,#111375)); +#111367 = ORIENTED_EDGE('',*,*,#111353,.T.); +#111368 = ORIENTED_EDGE('',*,*,#109705,.F.); +#111369 = ORIENTED_EDGE('',*,*,#111370,.F.); +#111370 = EDGE_CURVE('',#107608,#109698,#111371,.T.); +#111371 = LINE('',#111372,#111373); +#111372 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.909074502706)); +#111373 = VECTOR('',#111374,1.); +#111374 = DIRECTION('',(-1.,0.,0.)); +#111375 = ORIENTED_EDGE('',*,*,#107607,.T.); +#111376 = PLANE('',#111377); +#111377 = AXIS2_PLACEMENT_3D('',#111378,#111379,#111380); +#111378 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.909074502706)); +#111379 = DIRECTION('',(-0.,0.898138014367,0.439713664957)); +#111380 = DIRECTION('',(1.,0.,0.)); +#111381 = ADVANCED_FACE('',(#111382),#111393,.T.); +#111382 = FACE_BOUND('',#111383,.T.); +#111383 = EDGE_LOOP('',(#111384,#111385,#111386,#111392)); +#111384 = ORIENTED_EDGE('',*,*,#111370,.T.); +#111385 = ORIENTED_EDGE('',*,*,#109697,.F.); +#111386 = ORIENTED_EDGE('',*,*,#111387,.F.); +#111387 = EDGE_CURVE('',#107616,#109690,#111388,.T.); +#111388 = LINE('',#111389,#111390); +#111389 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.853755282879)); +#111390 = VECTOR('',#111391,1.); +#111391 = DIRECTION('',(-1.,0.,0.)); +#111392 = ORIENTED_EDGE('',*,*,#107615,.T.); +#111393 = PLANE('',#111394); +#111394 = AXIS2_PLACEMENT_3D('',#111395,#111396,#111397); +#111395 = CARTESIAN_POINT('',(-6.575,-2.1537,-0.853755282879)); +#111396 = DIRECTION('',(-0.,1.,0.)); +#111397 = DIRECTION('',(1.,0.,0.)); +#111398 = ADVANCED_FACE('',(#111399),#111410,.T.); +#111399 = FACE_BOUND('',#111400,.T.); +#111400 = EDGE_LOOP('',(#111401,#111402,#111403,#111409)); +#111401 = ORIENTED_EDGE('',*,*,#111387,.T.); +#111402 = ORIENTED_EDGE('',*,*,#109689,.F.); +#111403 = ORIENTED_EDGE('',*,*,#111404,.F.); +#111404 = EDGE_CURVE('',#107624,#109682,#111405,.T.); +#111405 = LINE('',#111406,#111407); +#111406 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-0.770776569367)); +#111407 = VECTOR('',#111408,1.); +#111408 = DIRECTION('',(-1.,0.,0.)); +#111409 = ORIENTED_EDGE('',*,*,#107623,.T.); +#111410 = PLANE('',#111411); +#111411 = AXIS2_PLACEMENT_3D('',#111412,#111413,#111414); +#111412 = CARTESIAN_POINT('',(-6.575,-2.099533307505,-0.770776569367)); +#111413 = DIRECTION('',(0.,0.837379001234,-0.546622729396)); +#111414 = DIRECTION('',(-1.,0.,0.)); +#111415 = ADVANCED_FACE('',(#111416),#111427,.T.); +#111416 = FACE_BOUND('',#111417,.T.); +#111417 = EDGE_LOOP('',(#111418,#111419,#111420,#111426)); +#111418 = ORIENTED_EDGE('',*,*,#111404,.T.); +#111419 = ORIENTED_EDGE('',*,*,#109681,.F.); +#111420 = ORIENTED_EDGE('',*,*,#111421,.F.); +#111421 = EDGE_CURVE('',#107632,#109674,#111422,.T.); +#111422 = LINE('',#111423,#111424); +#111423 = CARTESIAN_POINT('',(-6.575,-2.018283307505,-0.715457427025)); +#111424 = VECTOR('',#111425,1.); +#111425 = DIRECTION('',(-1.,0.,0.)); +#111426 = ORIENTED_EDGE('',*,*,#107631,.T.); +#111427 = PLANE('',#111428); +#111428 = AXIS2_PLACEMENT_3D('',#111429,#111430,#111431); +#111429 = CARTESIAN_POINT('',(-6.575,-2.018283307505,-0.715457427025)); +#111430 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#111431 = DIRECTION('',(-1.,0.,0.)); +#111432 = ADVANCED_FACE('',(#111433),#111444,.T.); +#111433 = FACE_BOUND('',#111434,.T.); +#111434 = EDGE_LOOP('',(#111435,#111436,#111437,#111443)); +#111435 = ORIENTED_EDGE('',*,*,#111421,.T.); +#111436 = ORIENTED_EDGE('',*,*,#109673,.F.); +#111437 = ORIENTED_EDGE('',*,*,#111438,.F.); +#111438 = EDGE_CURVE('',#107640,#109666,#111439,.T.); +#111439 = LINE('',#111440,#111441); +#111440 = CARTESIAN_POINT('',(-6.575,-1.882866653752,-0.687797855854)); +#111441 = VECTOR('',#111442,1.); +#111442 = DIRECTION('',(-1.,0.,0.)); +#111443 = ORIENTED_EDGE('',*,*,#107639,.T.); +#111444 = PLANE('',#111445); +#111445 = AXIS2_PLACEMENT_3D('',#111446,#111447,#111448); +#111446 = CARTESIAN_POINT('',(-6.575,-1.882866653752,-0.687797855854)); +#111447 = DIRECTION('',(0.,0.200123373381,-0.979770705536)); +#111448 = DIRECTION('',(-1.,0.,0.)); +#111449 = ADVANCED_FACE('',(#111450),#111461,.T.); +#111450 = FACE_BOUND('',#111451,.T.); +#111451 = EDGE_LOOP('',(#111452,#111453,#111454,#111460)); +#111452 = ORIENTED_EDGE('',*,*,#111438,.T.); +#111453 = ORIENTED_EDGE('',*,*,#109665,.F.); +#111454 = ORIENTED_EDGE('',*,*,#111455,.F.); +#111455 = EDGE_CURVE('',#107648,#109658,#111456,.T.); +#111456 = LINE('',#111457,#111458); +#111457 = CARTESIAN_POINT('',(-6.575,-1.774533346248,-0.687797855854)); +#111458 = VECTOR('',#111459,1.); +#111459 = DIRECTION('',(-1.,0.,0.)); +#111460 = ORIENTED_EDGE('',*,*,#107647,.T.); +#111461 = PLANE('',#111462); +#111462 = AXIS2_PLACEMENT_3D('',#111463,#111464,#111465); +#111463 = CARTESIAN_POINT('',(-6.575,-1.774533346248,-0.687797855854)); +#111464 = DIRECTION('',(0.,0.,-1.)); +#111465 = DIRECTION('',(0.,-1.,0.)); +#111466 = ADVANCED_FACE('',(#111467),#111478,.T.); +#111467 = FACE_BOUND('',#111468,.T.); +#111468 = EDGE_LOOP('',(#111469,#111470,#111471,#111477)); +#111469 = ORIENTED_EDGE('',*,*,#111455,.T.); +#111470 = ORIENTED_EDGE('',*,*,#109657,.F.); +#111471 = ORIENTED_EDGE('',*,*,#111472,.F.); +#111472 = EDGE_CURVE('',#107656,#109650,#111473,.T.); +#111473 = LINE('',#111474,#111475); +#111474 = CARTESIAN_POINT('',(-6.575,-1.639116673124,-0.715457427025)); +#111475 = VECTOR('',#111476,1.); +#111476 = DIRECTION('',(-1.,0.,1.110223024625E-14)); +#111477 = ORIENTED_EDGE('',*,*,#107655,.T.); +#111478 = PLANE('',#111479); +#111479 = AXIS2_PLACEMENT_3D('',#111480,#111481,#111482); +#111480 = CARTESIAN_POINT('',(-6.575,-1.639116673124,-0.715457427025)); +#111481 = DIRECTION('',(0.,-0.200123345899,-0.979770711149)); +#111482 = DIRECTION('',(0.,-0.979770711149,0.200123345899)); +#111483 = ADVANCED_FACE('',(#111484),#111495,.T.); +#111484 = FACE_BOUND('',#111485,.T.); +#111485 = EDGE_LOOP('',(#111486,#111487,#111488,#111494)); +#111486 = ORIENTED_EDGE('',*,*,#111472,.T.); +#111487 = ORIENTED_EDGE('',*,*,#109649,.F.); +#111488 = ORIENTED_EDGE('',*,*,#111489,.F.); +#111489 = EDGE_CURVE('',#107664,#109642,#111490,.T.); +#111490 = LINE('',#111491,#111492); +#111491 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-0.770776569367)); +#111492 = VECTOR('',#111493,1.); +#111493 = DIRECTION('',(-1.,2.220446049251E-14,0.)); +#111494 = ORIENTED_EDGE('',*,*,#107663,.T.); +#111495 = PLANE('',#111496); +#111496 = AXIS2_PLACEMENT_3D('',#111497,#111498,#111499); +#111497 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-0.770776569367)); +#111498 = DIRECTION('',(0.,-0.562790931242,-0.8265992788)); +#111499 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#111500 = ADVANCED_FACE('',(#111501),#111512,.T.); +#111501 = FACE_BOUND('',#111502,.T.); +#111502 = EDGE_LOOP('',(#111503,#111504,#111505,#111511)); +#111503 = ORIENTED_EDGE('',*,*,#111489,.T.); +#111504 = ORIENTED_EDGE('',*,*,#109641,.F.); +#111505 = ORIENTED_EDGE('',*,*,#111506,.F.); +#111506 = EDGE_CURVE('',#107672,#109634,#111507,.T.); +#111507 = LINE('',#111508,#111509); +#111508 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.853755282879)); +#111509 = VECTOR('',#111510,1.); +#111510 = DIRECTION('',(-1.,0.,0.)); +#111511 = ORIENTED_EDGE('',*,*,#107671,.T.); +#111512 = PLANE('',#111513); +#111513 = AXIS2_PLACEMENT_3D('',#111514,#111515,#111516); +#111514 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.853755282879)); +#111515 = DIRECTION('',(0.,-0.837379090715,-0.546622592319)); +#111516 = DIRECTION('',(0.,0.546622592319,-0.837379090715)); +#111517 = ADVANCED_FACE('',(#111518),#111529,.T.); +#111518 = FACE_BOUND('',#111519,.T.); +#111519 = EDGE_LOOP('',(#111520,#111521,#111522,#111528)); +#111520 = ORIENTED_EDGE('',*,*,#111506,.T.); +#111521 = ORIENTED_EDGE('',*,*,#109633,.F.); +#111522 = ORIENTED_EDGE('',*,*,#111523,.F.); +#111523 = EDGE_CURVE('',#107680,#109626,#111524,.T.); +#111524 = LINE('',#111525,#111526); +#111525 = CARTESIAN_POINT('',(-6.575,-1.36828333414,-0.853755282879)); +#111526 = VECTOR('',#111527,1.); +#111527 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#111528 = ORIENTED_EDGE('',*,*,#107679,.T.); +#111529 = PLANE('',#111530); +#111530 = AXIS2_PLACEMENT_3D('',#111531,#111532,#111533); +#111531 = CARTESIAN_POINT('',(-6.575,-1.36828333414,-0.853755282879)); +#111532 = DIRECTION('',(0.,0.,-1.)); +#111533 = DIRECTION('',(0.,-1.,0.)); +#111534 = ADVANCED_FACE('',(#111535),#111546,.T.); +#111535 = FACE_BOUND('',#111536,.T.); +#111536 = EDGE_LOOP('',(#111537,#111538,#111539,#111545)); +#111537 = ORIENTED_EDGE('',*,*,#111523,.T.); +#111538 = ORIENTED_EDGE('',*,*,#109625,.F.); +#111539 = ORIENTED_EDGE('',*,*,#111540,.F.); +#111540 = EDGE_CURVE('',#107688,#109618,#111541,.T.); +#111541 = LINE('',#111542,#111543); +#111542 = CARTESIAN_POINT('',(-6.575,-1.395366668281,-0.743116998196)); +#111543 = VECTOR('',#111544,1.); +#111544 = DIRECTION('',(-1.,0.,0.)); +#111545 = ORIENTED_EDGE('',*,*,#107687,.T.); +#111546 = PLANE('',#111547); +#111547 = AXIS2_PLACEMENT_3D('',#111548,#111549,#111550); +#111548 = CARTESIAN_POINT('',(-6.575,-1.395366668281,-0.743116998196)); +#111549 = DIRECTION('',(-0.,0.971321152228,0.237771359153)); +#111550 = DIRECTION('',(1.,0.,0.)); +#111551 = ADVANCED_FACE('',(#111552),#111563,.T.); +#111552 = FACE_BOUND('',#111553,.T.); +#111553 = EDGE_LOOP('',(#111554,#111555,#111556,#111562)); +#111554 = ORIENTED_EDGE('',*,*,#111540,.T.); +#111555 = ORIENTED_EDGE('',*,*,#109617,.F.); +#111556 = ORIENTED_EDGE('',*,*,#111557,.F.); +#111557 = EDGE_CURVE('',#107696,#109610,#111558,.T.); +#111558 = LINE('',#111559,#111560); +#111559 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.632478713512)); +#111560 = VECTOR('',#111561,1.); +#111561 = DIRECTION('',(-1.,4.440892098501E-14,-1.110223024625E-14)); +#111562 = ORIENTED_EDGE('',*,*,#107695,.T.); +#111563 = PLANE('',#111564); +#111564 = AXIS2_PLACEMENT_3D('',#111565,#111566,#111567); +#111565 = CARTESIAN_POINT('',(-6.575,-1.5037,-0.632478713512)); +#111566 = DIRECTION('',(-0.,0.714510390013,0.699624829865)); +#111567 = DIRECTION('',(1.,0.,0.)); +#111568 = ADVANCED_FACE('',(#111569),#111580,.T.); +#111569 = FACE_BOUND('',#111570,.T.); +#111570 = EDGE_LOOP('',(#111571,#111572,#111573,#111579)); +#111571 = ORIENTED_EDGE('',*,*,#111557,.T.); +#111572 = ORIENTED_EDGE('',*,*,#109609,.F.); +#111573 = ORIENTED_EDGE('',*,*,#111574,.F.); +#111574 = EDGE_CURVE('',#107704,#109602,#111575,.T.); +#111575 = LINE('',#111576,#111577); +#111576 = CARTESIAN_POINT('',(-6.575,-1.612033326876,-0.577159571171)); +#111577 = VECTOR('',#111578,1.); +#111578 = DIRECTION('',(-1.,0.,0.)); +#111579 = ORIENTED_EDGE('',*,*,#107703,.T.); +#111580 = PLANE('',#111581); +#111581 = AXIS2_PLACEMENT_3D('',#111582,#111583,#111584); +#111582 = CARTESIAN_POINT('',(-6.575,-1.612033326876,-0.577159571171)); +#111583 = DIRECTION('',(-0.,0.454777135048,0.890605275887)); +#111584 = DIRECTION('',(1.,0.,0.)); +#111585 = ADVANCED_FACE('',(#111586),#111597,.T.); +#111586 = FACE_BOUND('',#111587,.T.); +#111587 = EDGE_LOOP('',(#111588,#111589,#111590,#111596)); +#111588 = ORIENTED_EDGE('',*,*,#111574,.T.); +#111589 = ORIENTED_EDGE('',*,*,#109601,.F.); +#111590 = ORIENTED_EDGE('',*,*,#111591,.F.); +#111591 = EDGE_CURVE('',#107712,#109594,#111592,.T.); +#111592 = LINE('',#111593,#111594); +#111593 = CARTESIAN_POINT('',(-6.575,-1.801616653752,-0.5495)); +#111594 = VECTOR('',#111595,1.); +#111595 = DIRECTION('',(-1.,0.,0.)); +#111596 = ORIENTED_EDGE('',*,*,#107711,.T.); +#111597 = PLANE('',#111598); +#111598 = AXIS2_PLACEMENT_3D('',#111599,#111600,#111601); +#111599 = CARTESIAN_POINT('',(-6.575,-1.801616653752,-0.5495)); +#111600 = DIRECTION('',(-0.,0.144368235729,0.989524033317)); +#111601 = DIRECTION('',(1.,0.,0.)); +#111602 = ADVANCED_FACE('',(#111603),#111614,.T.); +#111603 = FACE_BOUND('',#111604,.T.); +#111604 = EDGE_LOOP('',(#111605,#111606,#111607,#111613)); +#111605 = ORIENTED_EDGE('',*,*,#111591,.T.); +#111606 = ORIENTED_EDGE('',*,*,#109593,.F.); +#111607 = ORIENTED_EDGE('',*,*,#111608,.F.); +#111608 = EDGE_CURVE('',#107720,#109586,#111609,.T.); +#111609 = LINE('',#111610,#111611); +#111610 = CARTESIAN_POINT('',(-6.575,-1.90995,-0.5495)); +#111611 = VECTOR('',#111612,1.); +#111612 = DIRECTION('',(-1.,0.,0.)); +#111613 = ORIENTED_EDGE('',*,*,#107719,.T.); +#111614 = PLANE('',#111615); +#111615 = AXIS2_PLACEMENT_3D('',#111616,#111617,#111618); +#111616 = CARTESIAN_POINT('',(-6.575,-1.90995,-0.5495)); +#111617 = DIRECTION('',(0.,0.,1.)); +#111618 = DIRECTION('',(1.,0.,-0.)); +#111619 = ADVANCED_FACE('',(#111620),#111631,.T.); +#111620 = FACE_BOUND('',#111621,.T.); +#111621 = EDGE_LOOP('',(#111622,#111623,#111624,#111630)); +#111622 = ORIENTED_EDGE('',*,*,#111608,.T.); +#111623 = ORIENTED_EDGE('',*,*,#109585,.F.); +#111624 = ORIENTED_EDGE('',*,*,#111625,.F.); +#111625 = EDGE_CURVE('',#107728,#109578,#111626,.T.); +#111626 = LINE('',#111627,#111628); +#111627 = CARTESIAN_POINT('',(-6.575,-2.07245,-0.577159571171)); +#111628 = VECTOR('',#111629,1.); +#111629 = DIRECTION('',(-1.,0.,0.)); +#111630 = ORIENTED_EDGE('',*,*,#107727,.T.); +#111631 = PLANE('',#111632); +#111632 = AXIS2_PLACEMENT_3D('',#111633,#111634,#111635); +#111633 = CARTESIAN_POINT('',(-6.575,-2.07245,-0.577159571171)); +#111634 = DIRECTION('',(0.,-0.167799328608,0.985821173093)); +#111635 = DIRECTION('',(-1.,0.,0.)); +#111636 = ADVANCED_FACE('',(#111637),#111648,.T.); +#111637 = FACE_BOUND('',#111638,.T.); +#111638 = EDGE_LOOP('',(#111639,#111640,#111641,#111647)); +#111639 = ORIENTED_EDGE('',*,*,#111625,.T.); +#111640 = ORIENTED_EDGE('',*,*,#109577,.F.); +#111641 = ORIENTED_EDGE('',*,*,#111642,.F.); +#111642 = EDGE_CURVE('',#107736,#109570,#111643,.T.); +#111643 = LINE('',#111644,#111645); +#111644 = CARTESIAN_POINT('',(-6.575,-2.180783307505,-0.632478713512)); +#111645 = VECTOR('',#111646,1.); +#111646 = DIRECTION('',(-1.,-4.440892098501E-14,-1.110223024625E-14)); +#111647 = ORIENTED_EDGE('',*,*,#107735,.T.); +#111648 = PLANE('',#111649); +#111649 = AXIS2_PLACEMENT_3D('',#111650,#111651,#111652); +#111650 = CARTESIAN_POINT('',(-6.575,-2.180783307505,-0.632478713512)); +#111651 = DIRECTION('',(0.,-0.45477719955,0.89060524295)); +#111652 = DIRECTION('',(-1.,0.,0.)); +#111653 = ADVANCED_FACE('',(#111654),#111665,.T.); +#111654 = FACE_BOUND('',#111655,.T.); +#111655 = EDGE_LOOP('',(#111656,#111657,#111658,#111664)); +#111656 = ORIENTED_EDGE('',*,*,#111642,.T.); +#111657 = ORIENTED_EDGE('',*,*,#109569,.F.); +#111658 = ORIENTED_EDGE('',*,*,#111659,.F.); +#111659 = EDGE_CURVE('',#107744,#109562,#111660,.T.); +#111660 = LINE('',#111661,#111662); +#111661 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-0.743116998196)); +#111662 = VECTOR('',#111663,1.); +#111663 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111664 = ORIENTED_EDGE('',*,*,#107743,.T.); +#111665 = PLANE('',#111666); +#111666 = AXIS2_PLACEMENT_3D('',#111667,#111668,#111669); +#111667 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-0.743116998196)); +#111668 = DIRECTION('',(0.,-0.714510218035,0.699625005502)); +#111669 = DIRECTION('',(-1.,0.,0.)); +#111670 = ADVANCED_FACE('',(#111671),#111682,.T.); +#111671 = FACE_BOUND('',#111672,.T.); +#111672 = EDGE_LOOP('',(#111673,#111674,#111675,#111681)); +#111673 = ORIENTED_EDGE('',*,*,#111659,.T.); +#111674 = ORIENTED_EDGE('',*,*,#109561,.F.); +#111675 = ORIENTED_EDGE('',*,*,#111676,.F.); +#111676 = EDGE_CURVE('',#107752,#109554,#111677,.T.); +#111677 = LINE('',#111678,#111679); +#111678 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.853755282879)); +#111679 = VECTOR('',#111680,1.); +#111680 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#111681 = ORIENTED_EDGE('',*,*,#107751,.T.); +#111682 = PLANE('',#111683); +#111683 = AXIS2_PLACEMENT_3D('',#111684,#111685,#111686); +#111684 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.853755282879)); +#111685 = DIRECTION('',(0.,-0.971321206235,0.237771138531)); +#111686 = DIRECTION('',(-1.,0.,0.)); +#111687 = ADVANCED_FACE('',(#111688),#111699,.T.); +#111688 = FACE_BOUND('',#111689,.T.); +#111689 = EDGE_LOOP('',(#111690,#111691,#111692,#111698)); +#111690 = ORIENTED_EDGE('',*,*,#111676,.T.); +#111691 = ORIENTED_EDGE('',*,*,#109553,.F.); +#111692 = ORIENTED_EDGE('',*,*,#111693,.F.); +#111693 = EDGE_CURVE('',#107760,#109546,#111694,.T.); +#111694 = LINE('',#111695,#111696); +#111695 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.909074502706)); +#111696 = VECTOR('',#111697,1.); +#111697 = DIRECTION('',(-1.,0.,-1.110223024625E-13)); +#111698 = ORIENTED_EDGE('',*,*,#107759,.T.); +#111699 = PLANE('',#111700); +#111700 = AXIS2_PLACEMENT_3D('',#111701,#111702,#111703); +#111701 = CARTESIAN_POINT('',(-6.575,-2.3162,-0.909074502706)); +#111702 = DIRECTION('',(0.,-1.,0.)); +#111703 = DIRECTION('',(0.,0.,-1.)); +#111704 = ADVANCED_FACE('',(#111705),#111716,.T.); +#111705 = FACE_BOUND('',#111706,.T.); +#111706 = EDGE_LOOP('',(#111707,#111708,#111709,#111715)); +#111707 = ORIENTED_EDGE('',*,*,#111693,.T.); +#111708 = ORIENTED_EDGE('',*,*,#109545,.F.); +#111709 = ORIENTED_EDGE('',*,*,#111710,.F.); +#111710 = EDGE_CURVE('',#107768,#109538,#111711,.T.); +#111711 = LINE('',#111712,#111713); +#111712 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-1.01971278739)); +#111713 = VECTOR('',#111714,1.); +#111714 = DIRECTION('',(-1.,0.,-4.440892098501E-14)); +#111715 = ORIENTED_EDGE('',*,*,#107767,.T.); +#111716 = PLANE('',#111717); +#111717 = AXIS2_PLACEMENT_3D('',#111718,#111719,#111720); +#111718 = CARTESIAN_POINT('',(-6.575,-2.289116692495,-1.01971278739)); +#111719 = DIRECTION('',(0.,-0.971321206235,-0.237771138531)); +#111720 = DIRECTION('',(0.,0.237771138531,-0.971321206235)); +#111721 = ADVANCED_FACE('',(#111722),#111733,.T.); +#111722 = FACE_BOUND('',#111723,.T.); +#111723 = EDGE_LOOP('',(#111724,#111725,#111726,#111732)); +#111724 = ORIENTED_EDGE('',*,*,#111710,.T.); +#111725 = ORIENTED_EDGE('',*,*,#109537,.F.); +#111726 = ORIENTED_EDGE('',*,*,#111727,.F.); +#111727 = EDGE_CURVE('',#107776,#109530,#111728,.T.); +#111728 = LINE('',#111729,#111730); +#111729 = CARTESIAN_POINT('',(-6.575,-2.23495,-1.102691500902)); +#111730 = VECTOR('',#111731,1.); +#111731 = DIRECTION('',(-1.,0.,0.)); +#111732 = ORIENTED_EDGE('',*,*,#107775,.T.); +#111733 = PLANE('',#111734); +#111734 = AXIS2_PLACEMENT_3D('',#111735,#111736,#111737); +#111735 = CARTESIAN_POINT('',(-6.575,-2.23495,-1.102691500902)); +#111736 = DIRECTION('',(0.,-0.837379001234,-0.546622729396)); +#111737 = DIRECTION('',(0.,0.546622729396,-0.837379001234)); +#111738 = ADVANCED_FACE('',(#111739),#111750,.T.); +#111739 = FACE_BOUND('',#111740,.T.); +#111740 = EDGE_LOOP('',(#111741,#111742,#111743,#111749)); +#111741 = ORIENTED_EDGE('',*,*,#111727,.T.); +#111742 = ORIENTED_EDGE('',*,*,#109529,.F.); +#111743 = ORIENTED_EDGE('',*,*,#111744,.F.); +#111744 = EDGE_CURVE('',#107784,#109522,#111745,.T.); +#111745 = LINE('',#111746,#111747); +#111746 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-1.711202124774)); +#111747 = VECTOR('',#111748,1.); +#111748 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111749 = ORIENTED_EDGE('',*,*,#107783,.T.); +#111750 = PLANE('',#111751); +#111751 = AXIS2_PLACEMENT_3D('',#111752,#111753,#111754); +#111752 = CARTESIAN_POINT('',(-6.575,-1.557866673124,-1.711202124774)); +#111753 = DIRECTION('',(0.,-0.668439980437,-0.743766087257)); +#111754 = DIRECTION('',(0.,-0.743766087257,0.668439980437)); +#111755 = ADVANCED_FACE('',(#111756),#111767,.T.); +#111756 = FACE_BOUND('',#111757,.T.); +#111757 = EDGE_LOOP('',(#111758,#111759,#111760,#111766)); +#111758 = ORIENTED_EDGE('',*,*,#111744,.T.); +#111759 = ORIENTED_EDGE('',*,*,#109521,.F.); +#111760 = ORIENTED_EDGE('',*,*,#111761,.F.); +#111761 = EDGE_CURVE('',#107792,#109514,#111762,.T.); +#111762 = LINE('',#111763,#111764); +#111763 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.711202124774)); +#111764 = VECTOR('',#111765,1.); +#111765 = DIRECTION('',(-1.,0.,0.)); +#111766 = ORIENTED_EDGE('',*,*,#107791,.T.); +#111767 = PLANE('',#111768); +#111768 = AXIS2_PLACEMENT_3D('',#111769,#111770,#111771); +#111769 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.711202124774)); +#111770 = DIRECTION('',(0.,0.,1.)); +#111771 = DIRECTION('',(1.,0.,-0.)); +#111772 = ADVANCED_FACE('',(#111773),#111784,.T.); +#111773 = FACE_BOUND('',#111774,.T.); +#111774 = EDGE_LOOP('',(#111775,#111776,#111777,#111783)); +#111775 = ORIENTED_EDGE('',*,*,#111761,.T.); +#111776 = ORIENTED_EDGE('',*,*,#109513,.F.); +#111777 = ORIENTED_EDGE('',*,*,#111778,.F.); +#111778 = EDGE_CURVE('',#107800,#109506,#111779,.T.); +#111779 = LINE('',#111780,#111781); +#111780 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.8495)); +#111781 = VECTOR('',#111782,1.); +#111782 = DIRECTION('',(-1.,0.,0.)); +#111783 = ORIENTED_EDGE('',*,*,#107799,.T.); +#111784 = PLANE('',#111785); +#111785 = AXIS2_PLACEMENT_3D('',#111786,#111787,#111788); +#111786 = CARTESIAN_POINT('',(-6.575,-2.3162,-1.8495)); +#111787 = DIRECTION('',(0.,-1.,0.)); +#111788 = DIRECTION('',(0.,0.,-1.)); +#111789 = ADVANCED_FACE('',(#111790),#111796,.T.); +#111790 = FACE_BOUND('',#111791,.T.); +#111791 = EDGE_LOOP('',(#111792,#111793,#111794,#111795)); +#111792 = ORIENTED_EDGE('',*,*,#111778,.T.); +#111793 = ORIENTED_EDGE('',*,*,#109503,.F.); +#111794 = ORIENTED_EDGE('',*,*,#111329,.F.); +#111795 = ORIENTED_EDGE('',*,*,#107807,.T.); +#111796 = PLANE('',#111797); +#111797 = AXIS2_PLACEMENT_3D('',#111798,#111799,#111800); +#111798 = CARTESIAN_POINT('',(-6.575,-1.3412,-1.8495)); +#111799 = DIRECTION('',(0.,0.,-1.)); +#111800 = DIRECTION('',(0.,-1.,0.)); +#111801 = ADVANCED_FACE('',(#111802),#111818,.T.); +#111802 = FACE_BOUND('',#111803,.T.); +#111803 = EDGE_LOOP('',(#111804,#111810,#111811,#111817)); +#111804 = ORIENTED_EDGE('',*,*,#111805,.T.); +#111805 = EDGE_CURVE('',#107866,#109736,#111806,.T.); +#111806 = LINE('',#111807,#111808); +#111807 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-0.5495)); +#111808 = VECTOR('',#111809,1.); +#111809 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111810 = ORIENTED_EDGE('',*,*,#109785,.F.); +#111811 = ORIENTED_EDGE('',*,*,#111812,.F.); +#111812 = EDGE_CURVE('',#107826,#109778,#111813,.T.); +#111813 = LINE('',#111814,#111815); +#111814 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-1.8495)); +#111815 = VECTOR('',#111816,1.); +#111816 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111817 = ORIENTED_EDGE('',*,*,#107873,.T.); +#111818 = PLANE('',#111819); +#111819 = AXIS2_PLACEMENT_3D('',#111820,#111821,#111822); +#111820 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-1.8495)); +#111821 = DIRECTION('',(0.,-1.,0.)); +#111822 = DIRECTION('',(0.,0.,-1.)); +#111823 = ADVANCED_FACE('',(#111824),#111835,.T.); +#111824 = FACE_BOUND('',#111825,.T.); +#111825 = EDGE_LOOP('',(#111826,#111827,#111828,#111834)); +#111826 = ORIENTED_EDGE('',*,*,#111812,.T.); +#111827 = ORIENTED_EDGE('',*,*,#109777,.F.); +#111828 = ORIENTED_EDGE('',*,*,#111829,.F.); +#111829 = EDGE_CURVE('',#107824,#109770,#111830,.T.); +#111830 = LINE('',#111831,#111832); +#111831 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-1.8495)); +#111832 = VECTOR('',#111833,1.); +#111833 = DIRECTION('',(-1.,0.,0.)); +#111834 = ORIENTED_EDGE('',*,*,#107823,.T.); +#111835 = PLANE('',#111836); +#111836 = AXIS2_PLACEMENT_3D('',#111837,#111838,#111839); +#111837 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-1.8495)); +#111838 = DIRECTION('',(0.,0.,-1.)); +#111839 = DIRECTION('',(0.,-1.,0.)); +#111840 = ADVANCED_FACE('',(#111841),#111852,.T.); +#111841 = FACE_BOUND('',#111842,.T.); +#111842 = EDGE_LOOP('',(#111843,#111844,#111845,#111851)); +#111843 = ORIENTED_EDGE('',*,*,#111829,.T.); +#111844 = ORIENTED_EDGE('',*,*,#109769,.F.); +#111845 = ORIENTED_EDGE('',*,*,#111846,.F.); +#111846 = EDGE_CURVE('',#107834,#109762,#111847,.T.); +#111847 = LINE('',#111848,#111849); +#111848 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.770776569367)); +#111849 = VECTOR('',#111850,1.); +#111850 = DIRECTION('',(-1.,0.,-1.110223024625E-14)); +#111851 = ORIENTED_EDGE('',*,*,#107833,.T.); +#111852 = PLANE('',#111853); +#111853 = AXIS2_PLACEMENT_3D('',#111854,#111855,#111856); +#111854 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.770776569367)); +#111855 = DIRECTION('',(-0.,1.,0.)); +#111856 = DIRECTION('',(1.,0.,0.)); +#111857 = ADVANCED_FACE('',(#111858),#111869,.T.); +#111858 = FACE_BOUND('',#111859,.T.); +#111859 = EDGE_LOOP('',(#111860,#111861,#111862,#111868)); +#111860 = ORIENTED_EDGE('',*,*,#111846,.T.); +#111861 = ORIENTED_EDGE('',*,*,#109761,.F.); +#111862 = ORIENTED_EDGE('',*,*,#111863,.F.); +#111863 = EDGE_CURVE('',#107842,#109754,#111864,.T.); +#111864 = LINE('',#111865,#111866); +#111865 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.964393645048)); +#111866 = VECTOR('',#111867,1.); +#111867 = DIRECTION('',(-1.,-4.440892098501E-14,-1.110223024625E-14)); +#111868 = ORIENTED_EDGE('',*,*,#107841,.T.); +#111869 = PLANE('',#111870); +#111870 = AXIS2_PLACEMENT_3D('',#111871,#111872,#111873); +#111871 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.964393645048)); +#111872 = DIRECTION('',(0.,-0.765974493732,-0.642870962909)); +#111873 = DIRECTION('',(0.,0.642870962909,-0.765974493732)); +#111874 = ADVANCED_FACE('',(#111875),#111886,.T.); +#111875 = FACE_BOUND('',#111876,.T.); +#111876 = EDGE_LOOP('',(#111877,#111878,#111879,#111885)); +#111877 = ORIENTED_EDGE('',*,*,#111863,.T.); +#111878 = ORIENTED_EDGE('',*,*,#109753,.F.); +#111879 = ORIENTED_EDGE('',*,*,#111880,.F.); +#111880 = EDGE_CURVE('',#107850,#109746,#111881,.T.); +#111881 = LINE('',#111882,#111883); +#111882 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.743116998196)); +#111883 = VECTOR('',#111884,1.); +#111884 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#111885 = ORIENTED_EDGE('',*,*,#107849,.T.); +#111886 = PLANE('',#111887); +#111887 = AXIS2_PLACEMENT_3D('',#111888,#111889,#111890); +#111888 = CARTESIAN_POINT('',(-6.575,-2.532866692495,-0.743116998196)); +#111889 = DIRECTION('',(-0.,1.,0.)); +#111890 = DIRECTION('',(1.,0.,0.)); +#111891 = ADVANCED_FACE('',(#111892),#111903,.T.); +#111892 = FACE_BOUND('',#111893,.T.); +#111893 = EDGE_LOOP('',(#111894,#111895,#111896,#111902)); +#111894 = ORIENTED_EDGE('',*,*,#111880,.T.); +#111895 = ORIENTED_EDGE('',*,*,#109745,.F.); +#111896 = ORIENTED_EDGE('',*,*,#111897,.F.); +#111897 = EDGE_CURVE('',#107858,#109738,#111898,.T.); +#111898 = LINE('',#111899,#111900); +#111899 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.5495)); +#111900 = VECTOR('',#111901,1.); +#111901 = DIRECTION('',(-1.,0.,0.)); +#111902 = ORIENTED_EDGE('',*,*,#107857,.T.); +#111903 = PLANE('',#111904); +#111904 = AXIS2_PLACEMENT_3D('',#111905,#111906,#111907); +#111905 = CARTESIAN_POINT('',(-6.575,-2.695366615009,-0.5495)); +#111906 = DIRECTION('',(-0.,0.765974367042,0.642871113859)); +#111907 = DIRECTION('',(1.,0.,0.)); +#111908 = ADVANCED_FACE('',(#111909),#111915,.T.); +#111909 = FACE_BOUND('',#111910,.T.); +#111910 = EDGE_LOOP('',(#111911,#111912,#111913,#111914)); +#111911 = ORIENTED_EDGE('',*,*,#111897,.T.); +#111912 = ORIENTED_EDGE('',*,*,#109735,.F.); +#111913 = ORIENTED_EDGE('',*,*,#111805,.F.); +#111914 = ORIENTED_EDGE('',*,*,#107865,.T.); +#111915 = PLANE('',#111916); +#111916 = AXIS2_PLACEMENT_3D('',#111917,#111918,#111919); +#111917 = CARTESIAN_POINT('',(-6.575,-2.857866615009,-0.5495)); +#111918 = DIRECTION('',(0.,0.,1.)); +#111919 = DIRECTION('',(1.,0.,-0.)); +#111920 = ADVANCED_FACE('',(#111921),#111937,.T.); +#111921 = FACE_BOUND('',#111922,.T.); +#111922 = EDGE_LOOP('',(#111923,#111929,#111930,#111936)); +#111923 = ORIENTED_EDGE('',*,*,#111924,.T.); +#111924 = EDGE_CURVE('',#108076,#109800,#111925,.T.); +#111925 = LINE('',#111926,#111927); +#111926 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.323968070269)); +#111927 = VECTOR('',#111928,1.); +#111928 = DIRECTION('',(-1.,0.,0.)); +#111929 = ORIENTED_EDGE('',*,*,#110001,.F.); +#111930 = ORIENTED_EDGE('',*,*,#111931,.F.); +#111931 = EDGE_CURVE('',#107884,#109994,#111932,.T.); +#111932 = LINE('',#111933,#111934); +#111933 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.075031929731)); +#111934 = VECTOR('',#111935,1.); +#111935 = DIRECTION('',(-1.,0.,0.)); +#111936 = ORIENTED_EDGE('',*,*,#108083,.T.); +#111937 = PLANE('',#111938); +#111938 = AXIS2_PLACEMENT_3D('',#111939,#111940,#111941); +#111939 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.075031929731)); +#111940 = DIRECTION('',(-0.,1.,0.)); +#111941 = DIRECTION('',(1.,0.,0.)); +#111942 = ADVANCED_FACE('',(#111943),#111954,.T.); +#111943 = FACE_BOUND('',#111944,.T.); +#111944 = EDGE_LOOP('',(#111945,#111946,#111947,#111953)); +#111945 = ORIENTED_EDGE('',*,*,#111931,.T.); +#111946 = ORIENTED_EDGE('',*,*,#109993,.F.); +#111947 = ORIENTED_EDGE('',*,*,#111948,.F.); +#111948 = EDGE_CURVE('',#107882,#109986,#111949,.T.); +#111949 = LINE('',#111950,#111951); +#111950 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-0.936734073877)); +#111951 = VECTOR('',#111952,1.); +#111952 = DIRECTION('',(-1.,0.,0.)); +#111953 = ORIENTED_EDGE('',*,*,#107881,.T.); +#111954 = PLANE('',#111955); +#111955 = AXIS2_PLACEMENT_3D('',#111956,#111957,#111958); +#111956 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-0.936734073877)); +#111957 = DIRECTION('',(-0.,0.98135927276,0.192182147373)); +#111958 = DIRECTION('',(1.,0.,0.)); +#111959 = ADVANCED_FACE('',(#111960),#111971,.T.); +#111960 = FACE_BOUND('',#111961,.T.); +#111961 = EDGE_LOOP('',(#111962,#111963,#111964,#111970)); +#111962 = ORIENTED_EDGE('',*,*,#111948,.T.); +#111963 = ORIENTED_EDGE('',*,*,#109985,.F.); +#111964 = ORIENTED_EDGE('',*,*,#111965,.F.); +#111965 = EDGE_CURVE('',#107892,#109978,#111966,.T.); +#111966 = LINE('',#111967,#111968); +#111967 = CARTESIAN_POINT('',(-6.575,-3.1287,-0.853755282879)); +#111968 = VECTOR('',#111969,1.); +#111969 = DIRECTION('',(-1.,4.440892098501E-14,-5.551115123126E-14)); +#111970 = ORIENTED_EDGE('',*,*,#107891,.T.); +#111971 = PLANE('',#111972); +#111972 = AXIS2_PLACEMENT_3D('',#111973,#111974,#111975); +#111973 = CARTESIAN_POINT('',(-6.575,-3.1287,-0.853755282879)); +#111974 = DIRECTION('',(-0.,0.95064510301,0.310280337958)); +#111975 = DIRECTION('',(1.,0.,0.)); +#111976 = ADVANCED_FACE('',(#111977),#111988,.T.); +#111977 = FACE_BOUND('',#111978,.T.); +#111978 = EDGE_LOOP('',(#111979,#111980,#111981,#111987)); +#111979 = ORIENTED_EDGE('',*,*,#111965,.T.); +#111980 = ORIENTED_EDGE('',*,*,#109977,.F.); +#111981 = ORIENTED_EDGE('',*,*,#111982,.F.); +#111982 = EDGE_CURVE('',#107900,#109970,#111983,.T.); +#111983 = LINE('',#111984,#111985); +#111984 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-0.743116998196)); +#111985 = VECTOR('',#111986,1.); +#111986 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#111987 = ORIENTED_EDGE('',*,*,#107899,.T.); +#111988 = PLANE('',#111989); +#111989 = AXIS2_PLACEMENT_3D('',#111990,#111991,#111992); +#111990 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-0.743116998196)); +#111991 = DIRECTION('',(-0.,0.898138262779,0.43971315756)); +#111992 = DIRECTION('',(1.,0.,0.)); +#111993 = ADVANCED_FACE('',(#111994),#112005,.T.); +#111994 = FACE_BOUND('',#111995,.T.); +#111995 = EDGE_LOOP('',(#111996,#111997,#111998,#112004)); +#111996 = ORIENTED_EDGE('',*,*,#111982,.T.); +#111997 = ORIENTED_EDGE('',*,*,#109969,.F.); +#111998 = ORIENTED_EDGE('',*,*,#111999,.F.); +#111999 = EDGE_CURVE('',#107908,#109962,#112000,.T.); +#112000 = LINE('',#112001,#112002); +#112001 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-0.660138284683)); +#112002 = VECTOR('',#112003,1.); +#112003 = DIRECTION('',(-1.,-4.440892098501E-14,1.110223024625E-14)); +#112004 = ORIENTED_EDGE('',*,*,#107907,.T.); +#112005 = PLANE('',#112006); +#112006 = AXIS2_PLACEMENT_3D('',#112007,#112008,#112009); +#112007 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-0.660138284683)); +#112008 = DIRECTION('',(-0.,0.714510384802,0.699624835187)); +#112009 = DIRECTION('',(1.,0.,0.)); +#112010 = ADVANCED_FACE('',(#112011),#112022,.T.); +#112011 = FACE_BOUND('',#112012,.T.); +#112012 = EDGE_LOOP('',(#112013,#112014,#112015,#112021)); +#112013 = ORIENTED_EDGE('',*,*,#111999,.T.); +#112014 = ORIENTED_EDGE('',*,*,#109961,.F.); +#112015 = ORIENTED_EDGE('',*,*,#112016,.F.); +#112016 = EDGE_CURVE('',#107916,#109954,#112017,.T.); +#112017 = LINE('',#112018,#112019); +#112018 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-0.577159571171)); +#112019 = VECTOR('',#112020,1.); +#112020 = DIRECTION('',(-1.,0.,0.)); +#112021 = ORIENTED_EDGE('',*,*,#107915,.T.); +#112022 = PLANE('',#112023); +#112023 = AXIS2_PLACEMENT_3D('',#112024,#112025,#112026); +#112024 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-0.577159571171)); +#112025 = DIRECTION('',(-0.,0.52247663879,0.852653600191)); +#112026 = DIRECTION('',(1.,0.,0.)); +#112027 = ADVANCED_FACE('',(#112028),#112039,.T.); +#112028 = FACE_BOUND('',#112029,.T.); +#112029 = EDGE_LOOP('',(#112030,#112031,#112032,#112038)); +#112030 = ORIENTED_EDGE('',*,*,#112016,.T.); +#112031 = ORIENTED_EDGE('',*,*,#109953,.F.); +#112032 = ORIENTED_EDGE('',*,*,#112033,.F.); +#112033 = EDGE_CURVE('',#107924,#109946,#112034,.T.); +#112034 = LINE('',#112035,#112036); +#112035 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.5495)); +#112036 = VECTOR('',#112037,1.); +#112037 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#112038 = ORIENTED_EDGE('',*,*,#107923,.T.); +#112039 = PLANE('',#112040); +#112040 = AXIS2_PLACEMENT_3D('',#112041,#112042,#112043); +#112041 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.5495)); +#112042 = DIRECTION('',(-0.,0.167799328608,0.985821173093)); +#112043 = DIRECTION('',(1.,0.,0.)); +#112044 = ADVANCED_FACE('',(#112045),#112056,.T.); +#112045 = FACE_BOUND('',#112046,.T.); +#112046 = EDGE_LOOP('',(#112047,#112048,#112049,#112055)); +#112047 = ORIENTED_EDGE('',*,*,#112033,.T.); +#112048 = ORIENTED_EDGE('',*,*,#109945,.F.); +#112049 = ORIENTED_EDGE('',*,*,#112050,.F.); +#112050 = EDGE_CURVE('',#107932,#109938,#112051,.T.); +#112051 = LINE('',#112052,#112053); +#112052 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-0.577159571171)); +#112053 = VECTOR('',#112054,1.); +#112054 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112055 = ORIENTED_EDGE('',*,*,#107931,.T.); +#112056 = PLANE('',#112057); +#112057 = AXIS2_PLACEMENT_3D('',#112058,#112059,#112060); +#112058 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-0.577159571171)); +#112059 = DIRECTION('',(0.,-0.167799328608,0.985821173093)); +#112060 = DIRECTION('',(-1.,0.,0.)); +#112061 = ADVANCED_FACE('',(#112062),#112073,.T.); +#112062 = FACE_BOUND('',#112063,.T.); +#112063 = EDGE_LOOP('',(#112064,#112065,#112066,#112072)); +#112064 = ORIENTED_EDGE('',*,*,#112050,.T.); +#112065 = ORIENTED_EDGE('',*,*,#109937,.F.); +#112066 = ORIENTED_EDGE('',*,*,#112067,.F.); +#112067 = EDGE_CURVE('',#107940,#109930,#112068,.T.); +#112068 = LINE('',#112069,#112070); +#112069 = CARTESIAN_POINT('',(-6.575,-3.85995,-0.660138284683)); +#112070 = VECTOR('',#112071,1.); +#112071 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#112072 = ORIENTED_EDGE('',*,*,#107939,.T.); +#112073 = PLANE('',#112074); +#112074 = AXIS2_PLACEMENT_3D('',#112075,#112076,#112077); +#112075 = CARTESIAN_POINT('',(-6.575,-3.85995,-0.660138284683)); +#112076 = DIRECTION('',(0.,-0.522477073493,0.85265333382)); +#112077 = DIRECTION('',(-1.,0.,0.)); +#112078 = ADVANCED_FACE('',(#112079),#112090,.T.); +#112079 = FACE_BOUND('',#112080,.T.); +#112080 = EDGE_LOOP('',(#112081,#112082,#112083,#112089)); +#112081 = ORIENTED_EDGE('',*,*,#112067,.T.); +#112082 = ORIENTED_EDGE('',*,*,#109929,.F.); +#112083 = ORIENTED_EDGE('',*,*,#112084,.F.); +#112084 = EDGE_CURVE('',#107948,#109922,#112085,.T.); +#112085 = LINE('',#112086,#112087); +#112086 = CARTESIAN_POINT('',(-6.575,-3.9412,-0.743116998196)); +#112087 = VECTOR('',#112088,1.); +#112088 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#112089 = ORIENTED_EDGE('',*,*,#107947,.T.); +#112090 = PLANE('',#112091); +#112091 = AXIS2_PLACEMENT_3D('',#112092,#112093,#112094); +#112092 = CARTESIAN_POINT('',(-6.575,-3.9412,-0.743116998196)); +#112093 = DIRECTION('',(0.,-0.714510384802,0.699624835187)); +#112094 = DIRECTION('',(-1.,0.,0.)); +#112095 = ADVANCED_FACE('',(#112096),#112107,.T.); +#112096 = FACE_BOUND('',#112097,.T.); +#112097 = EDGE_LOOP('',(#112098,#112099,#112100,#112106)); +#112098 = ORIENTED_EDGE('',*,*,#112084,.T.); +#112099 = ORIENTED_EDGE('',*,*,#109921,.F.); +#112100 = ORIENTED_EDGE('',*,*,#112101,.F.); +#112101 = EDGE_CURVE('',#107956,#109914,#112102,.T.); +#112102 = LINE('',#112103,#112104); +#112103 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-0.853755282879)); +#112104 = VECTOR('',#112105,1.); +#112105 = DIRECTION('',(-1.,0.,-5.551115123126E-14)); +#112106 = ORIENTED_EDGE('',*,*,#107955,.T.); +#112107 = PLANE('',#112108); +#112108 = AXIS2_PLACEMENT_3D('',#112109,#112110,#112111); +#112109 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-0.853755282879)); +#112110 = DIRECTION('',(0.,-0.898137765954,0.439714172353)); +#112111 = DIRECTION('',(-1.,0.,0.)); +#112112 = ADVANCED_FACE('',(#112113),#112124,.T.); +#112113 = FACE_BOUND('',#112114,.T.); +#112114 = EDGE_LOOP('',(#112115,#112116,#112117,#112123)); +#112115 = ORIENTED_EDGE('',*,*,#112101,.T.); +#112116 = ORIENTED_EDGE('',*,*,#109913,.F.); +#112117 = ORIENTED_EDGE('',*,*,#112118,.F.); +#112118 = EDGE_CURVE('',#107964,#109906,#112119,.T.); +#112119 = LINE('',#112120,#112121); +#112120 = CARTESIAN_POINT('',(-6.575,-4.02245,-0.936734073877)); +#112121 = VECTOR('',#112122,1.); +#112122 = DIRECTION('',(-1.,0.,3.330669073876E-14)); +#112123 = ORIENTED_EDGE('',*,*,#107963,.T.); +#112124 = PLANE('',#112125); +#112125 = AXIS2_PLACEMENT_3D('',#112126,#112127,#112128); +#112126 = CARTESIAN_POINT('',(-6.575,-4.02245,-0.936734073877)); +#112127 = DIRECTION('',(0.,-0.950645626703,0.31027873345)); +#112128 = DIRECTION('',(-1.,0.,0.)); +#112129 = ADVANCED_FACE('',(#112130),#112141,.T.); +#112130 = FACE_BOUND('',#112131,.T.); +#112131 = EDGE_LOOP('',(#112132,#112133,#112134,#112140)); +#112132 = ORIENTED_EDGE('',*,*,#112118,.T.); +#112133 = ORIENTED_EDGE('',*,*,#109905,.F.); +#112134 = ORIENTED_EDGE('',*,*,#112135,.F.); +#112135 = EDGE_CURVE('',#107972,#109898,#112136,.T.); +#112136 = LINE('',#112137,#112138); +#112137 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.075031929731)); +#112138 = VECTOR('',#112139,1.); +#112139 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#112140 = ORIENTED_EDGE('',*,*,#107971,.T.); +#112141 = PLANE('',#112142); +#112142 = AXIS2_PLACEMENT_3D('',#112143,#112144,#112145); +#112143 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.075031929731)); +#112144 = DIRECTION('',(0.,-0.98135927276,0.192182147373)); +#112145 = DIRECTION('',(-1.,0.,0.)); +#112146 = ADVANCED_FACE('',(#112147),#112158,.T.); +#112147 = FACE_BOUND('',#112148,.T.); +#112148 = EDGE_LOOP('',(#112149,#112150,#112151,#112157)); +#112149 = ORIENTED_EDGE('',*,*,#112135,.T.); +#112150 = ORIENTED_EDGE('',*,*,#109897,.F.); +#112151 = ORIENTED_EDGE('',*,*,#112152,.F.); +#112152 = EDGE_CURVE('',#107980,#109890,#112153,.T.); +#112153 = LINE('',#112154,#112155); +#112154 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.323968070269)); +#112155 = VECTOR('',#112156,1.); +#112156 = DIRECTION('',(-1.,0.,-2.886579864026E-13)); +#112157 = ORIENTED_EDGE('',*,*,#107979,.T.); +#112158 = PLANE('',#112159); +#112159 = AXIS2_PLACEMENT_3D('',#112160,#112161,#112162); +#112160 = CARTESIAN_POINT('',(-6.575,-4.049533230019,-1.323968070269)); +#112161 = DIRECTION('',(0.,-1.,0.)); +#112162 = DIRECTION('',(0.,0.,-1.)); +#112163 = ADVANCED_FACE('',(#112164),#112175,.T.); +#112164 = FACE_BOUND('',#112165,.T.); +#112165 = EDGE_LOOP('',(#112166,#112167,#112168,#112174)); +#112166 = ORIENTED_EDGE('',*,*,#112152,.T.); +#112167 = ORIENTED_EDGE('',*,*,#109889,.F.); +#112168 = ORIENTED_EDGE('',*,*,#112169,.F.); +#112169 = EDGE_CURVE('',#107988,#109882,#112170,.T.); +#112170 = LINE('',#112171,#112172); +#112171 = CARTESIAN_POINT('',(-6.575,-4.02245,-1.462265964866)); +#112172 = VECTOR('',#112173,1.); +#112173 = DIRECTION('',(-1.,0.,0.)); +#112174 = ORIENTED_EDGE('',*,*,#107987,.T.); +#112175 = PLANE('',#112176); +#112176 = AXIS2_PLACEMENT_3D('',#112177,#112178,#112179); +#112177 = CARTESIAN_POINT('',(-6.575,-4.02245,-1.462265964866)); +#112178 = DIRECTION('',(0.,-0.981359282913,-0.192182095523)); +#112179 = DIRECTION('',(0.,0.192182095523,-0.981359282913)); +#112180 = ADVANCED_FACE('',(#112181),#112192,.T.); +#112181 = FACE_BOUND('',#112182,.T.); +#112182 = EDGE_LOOP('',(#112183,#112184,#112185,#112191)); +#112183 = ORIENTED_EDGE('',*,*,#112169,.T.); +#112184 = ORIENTED_EDGE('',*,*,#109881,.F.); +#112185 = ORIENTED_EDGE('',*,*,#112186,.F.); +#112186 = EDGE_CURVE('',#107996,#109874,#112187,.T.); +#112187 = LINE('',#112188,#112189); +#112188 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-1.545244678378)); +#112189 = VECTOR('',#112190,1.); +#112190 = DIRECTION('',(-1.,0.,0.)); +#112191 = ORIENTED_EDGE('',*,*,#107995,.T.); +#112192 = PLANE('',#112193); +#112193 = AXIS2_PLACEMENT_3D('',#112194,#112195,#112196); +#112194 = CARTESIAN_POINT('',(-6.575,-3.995366769981,-1.545244678378)); +#112195 = DIRECTION('',(0.,-0.950645541239,-0.310278995296)); +#112196 = DIRECTION('',(0.,0.310278995296,-0.950645541239)); +#112197 = ADVANCED_FACE('',(#112198),#112209,.T.); +#112198 = FACE_BOUND('',#112199,.T.); +#112199 = EDGE_LOOP('',(#112200,#112201,#112202,#112208)); +#112200 = ORIENTED_EDGE('',*,*,#112186,.T.); +#112201 = ORIENTED_EDGE('',*,*,#109873,.F.); +#112202 = ORIENTED_EDGE('',*,*,#112203,.F.); +#112203 = EDGE_CURVE('',#108004,#109866,#112204,.T.); +#112204 = LINE('',#112205,#112206); +#112205 = CARTESIAN_POINT('',(-6.575,-3.9412,-1.655882982433)); +#112206 = VECTOR('',#112207,1.); +#112207 = DIRECTION('',(-1.,0.,0.)); +#112208 = ORIENTED_EDGE('',*,*,#108003,.T.); +#112209 = PLANE('',#112210); +#112210 = AXIS2_PLACEMENT_3D('',#112211,#112212,#112213); +#112211 = CARTESIAN_POINT('',(-6.575,-3.9412,-1.655882982433)); +#112212 = DIRECTION('',(0.,-0.898137796358,-0.439714110249)); +#112213 = DIRECTION('',(0.,0.439714110249,-0.898137796358)); +#112214 = ADVANCED_FACE('',(#112215),#112226,.T.); +#112215 = FACE_BOUND('',#112216,.T.); +#112216 = EDGE_LOOP('',(#112217,#112218,#112219,#112225)); +#112217 = ORIENTED_EDGE('',*,*,#112203,.T.); +#112218 = ORIENTED_EDGE('',*,*,#109865,.F.); +#112219 = ORIENTED_EDGE('',*,*,#112220,.F.); +#112220 = EDGE_CURVE('',#108012,#109858,#112221,.T.); +#112221 = LINE('',#112222,#112223); +#112222 = CARTESIAN_POINT('',(-6.575,-3.85995,-1.738861705631)); +#112223 = VECTOR('',#112224,1.); +#112224 = DIRECTION('',(-1.,0.,0.)); +#112225 = ORIENTED_EDGE('',*,*,#108011,.T.); +#112226 = PLANE('',#112227); +#112227 = AXIS2_PLACEMENT_3D('',#112228,#112229,#112230); +#112228 = CARTESIAN_POINT('',(-6.575,-3.85995,-1.738861705631)); +#112229 = DIRECTION('',(0.,-0.714510425625,-0.699624793495)); +#112230 = DIRECTION('',(0.,0.699624793495,-0.714510425625)); +#112231 = ADVANCED_FACE('',(#112232),#112243,.T.); +#112232 = FACE_BOUND('',#112233,.T.); +#112233 = EDGE_LOOP('',(#112234,#112235,#112236,#112242)); +#112234 = ORIENTED_EDGE('',*,*,#112220,.T.); +#112235 = ORIENTED_EDGE('',*,*,#109857,.F.); +#112236 = ORIENTED_EDGE('',*,*,#112237,.F.); +#112237 = EDGE_CURVE('',#108020,#109850,#112238,.T.); +#112238 = LINE('',#112239,#112240); +#112239 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-1.821840426408)); +#112240 = VECTOR('',#112241,1.); +#112241 = DIRECTION('',(-1.,0.,0.)); +#112242 = ORIENTED_EDGE('',*,*,#108019,.T.); +#112243 = PLANE('',#112244); +#112244 = AXIS2_PLACEMENT_3D('',#112245,#112246,#112247); +#112245 = CARTESIAN_POINT('',(-6.575,-3.724533384991,-1.821840426408)); +#112246 = DIRECTION('',(0.,-0.522477106747,-0.852653313443)); +#112247 = DIRECTION('',(0.,-0.852653313443,0.522477106747)); +#112248 = ADVANCED_FACE('',(#112249),#112260,.T.); +#112249 = FACE_BOUND('',#112250,.T.); +#112250 = EDGE_LOOP('',(#112251,#112252,#112253,#112259)); +#112251 = ORIENTED_EDGE('',*,*,#112237,.T.); +#112252 = ORIENTED_EDGE('',*,*,#109849,.F.); +#112253 = ORIENTED_EDGE('',*,*,#112254,.F.); +#112254 = EDGE_CURVE('',#108028,#109842,#112255,.T.); +#112255 = LINE('',#112256,#112257); +#112256 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.8495)); +#112257 = VECTOR('',#112258,1.); +#112258 = DIRECTION('',(-1.,0.,0.)); +#112259 = ORIENTED_EDGE('',*,*,#108027,.T.); +#112260 = PLANE('',#112261); +#112261 = AXIS2_PLACEMENT_3D('',#112262,#112263,#112264); +#112262 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.8495)); +#112263 = DIRECTION('',(0.,-0.167799342885,-0.985821170663)); +#112264 = DIRECTION('',(0.,-0.985821170663,0.167799342885)); +#112265 = ADVANCED_FACE('',(#112266),#112277,.T.); +#112266 = FACE_BOUND('',#112267,.T.); +#112267 = EDGE_LOOP('',(#112268,#112269,#112270,#112276)); +#112268 = ORIENTED_EDGE('',*,*,#112254,.T.); +#112269 = ORIENTED_EDGE('',*,*,#109841,.F.); +#112270 = ORIENTED_EDGE('',*,*,#112271,.F.); +#112271 = EDGE_CURVE('',#108036,#109834,#112272,.T.); +#112272 = LINE('',#112273,#112274); +#112273 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-1.821840426408)); +#112274 = VECTOR('',#112275,1.); +#112275 = DIRECTION('',(-1.,0.,0.)); +#112276 = ORIENTED_EDGE('',*,*,#108035,.T.); +#112277 = PLANE('',#112278); +#112278 = AXIS2_PLACEMENT_3D('',#112279,#112280,#112281); +#112279 = CARTESIAN_POINT('',(-6.575,-3.399533384991,-1.821840426408)); +#112280 = DIRECTION('',(0.,0.167799342885,-0.985821170663)); +#112281 = DIRECTION('',(-1.,0.,0.)); +#112282 = ADVANCED_FACE('',(#112283),#112294,.T.); +#112283 = FACE_BOUND('',#112284,.T.); +#112284 = EDGE_LOOP('',(#112285,#112286,#112287,#112293)); +#112285 = ORIENTED_EDGE('',*,*,#112271,.T.); +#112286 = ORIENTED_EDGE('',*,*,#109833,.F.); +#112287 = ORIENTED_EDGE('',*,*,#112288,.F.); +#112288 = EDGE_CURVE('',#108044,#109826,#112289,.T.); +#112289 = LINE('',#112290,#112291); +#112290 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-1.738861705631)); +#112291 = VECTOR('',#112292,1.); +#112292 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112293 = ORIENTED_EDGE('',*,*,#108043,.T.); +#112294 = PLANE('',#112295); +#112295 = AXIS2_PLACEMENT_3D('',#112296,#112297,#112298); +#112296 = CARTESIAN_POINT('',(-6.575,-3.264116615009,-1.738861705631)); +#112297 = DIRECTION('',(0.,0.522476672043,-0.852653579815)); +#112298 = DIRECTION('',(-1.,0.,0.)); +#112299 = ADVANCED_FACE('',(#112300),#112311,.T.); +#112300 = FACE_BOUND('',#112301,.T.); +#112301 = EDGE_LOOP('',(#112302,#112303,#112304,#112310)); +#112302 = ORIENTED_EDGE('',*,*,#112288,.T.); +#112303 = ORIENTED_EDGE('',*,*,#109825,.F.); +#112304 = ORIENTED_EDGE('',*,*,#112305,.F.); +#112305 = EDGE_CURVE('',#108052,#109818,#112306,.T.); +#112306 = LINE('',#112307,#112308); +#112307 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-1.655882982433)); +#112308 = VECTOR('',#112309,1.); +#112309 = DIRECTION('',(-1.,4.440892098501E-14,6.661338147752E-14)); +#112310 = ORIENTED_EDGE('',*,*,#108051,.T.); +#112311 = PLANE('',#112312); +#112312 = AXIS2_PLACEMENT_3D('',#112313,#112314,#112315); +#112313 = CARTESIAN_POINT('',(-6.575,-3.182866615009,-1.655882982433)); +#112314 = DIRECTION('',(0.,0.714510425625,-0.699624793495)); +#112315 = DIRECTION('',(-1.,0.,0.)); +#112316 = ADVANCED_FACE('',(#112317),#112328,.T.); +#112317 = FACE_BOUND('',#112318,.T.); +#112318 = EDGE_LOOP('',(#112319,#112320,#112321,#112327)); +#112319 = ORIENTED_EDGE('',*,*,#112305,.T.); +#112320 = ORIENTED_EDGE('',*,*,#109817,.F.); +#112321 = ORIENTED_EDGE('',*,*,#112322,.F.); +#112322 = EDGE_CURVE('',#108060,#109810,#112323,.T.); +#112323 = LINE('',#112324,#112325); +#112324 = CARTESIAN_POINT('',(-6.575,-3.1287,-1.545244678378)); +#112325 = VECTOR('',#112326,1.); +#112326 = DIRECTION('',(-1.,-1.33226762955E-13,-2.664535259101E-13)); +#112327 = ORIENTED_EDGE('',*,*,#108059,.T.); +#112328 = PLANE('',#112329); +#112329 = AXIS2_PLACEMENT_3D('',#112330,#112331,#112332); +#112330 = CARTESIAN_POINT('',(-6.575,-3.1287,-1.545244678378)); +#112331 = DIRECTION('',(0.,0.898138293184,-0.439713095457)); +#112332 = DIRECTION('',(-1.,0.,0.)); +#112333 = ADVANCED_FACE('',(#112334),#112345,.T.); +#112334 = FACE_BOUND('',#112335,.T.); +#112335 = EDGE_LOOP('',(#112336,#112337,#112338,#112344)); +#112336 = ORIENTED_EDGE('',*,*,#112322,.T.); +#112337 = ORIENTED_EDGE('',*,*,#109809,.F.); +#112338 = ORIENTED_EDGE('',*,*,#112339,.F.); +#112339 = EDGE_CURVE('',#108068,#109802,#112340,.T.); +#112340 = LINE('',#112341,#112342); +#112341 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-1.462265964866)); +#112342 = VECTOR('',#112343,1.); +#112343 = DIRECTION('',(-1.,0.,0.)); +#112344 = ORIENTED_EDGE('',*,*,#108067,.T.); +#112345 = PLANE('',#112346); +#112346 = AXIS2_PLACEMENT_3D('',#112347,#112348,#112349); +#112347 = CARTESIAN_POINT('',(-6.575,-3.101616615009,-1.462265964866)); +#112348 = DIRECTION('',(0.,0.950645017546,-0.310280599805)); +#112349 = DIRECTION('',(-1.,0.,0.)); +#112350 = ADVANCED_FACE('',(#112351),#112357,.T.); +#112351 = FACE_BOUND('',#112352,.T.); +#112352 = EDGE_LOOP('',(#112353,#112354,#112355,#112356)); +#112353 = ORIENTED_EDGE('',*,*,#112339,.T.); +#112354 = ORIENTED_EDGE('',*,*,#109799,.F.); +#112355 = ORIENTED_EDGE('',*,*,#111924,.F.); +#112356 = ORIENTED_EDGE('',*,*,#108075,.T.); +#112357 = PLANE('',#112358); +#112358 = AXIS2_PLACEMENT_3D('',#112359,#112360,#112361); +#112359 = CARTESIAN_POINT('',(-6.575,-3.074533384991,-1.323968070269)); +#112360 = DIRECTION('',(0.,0.981359282913,-0.192182095523)); +#112361 = DIRECTION('',(-1.,0.,0.)); +#112362 = ADVANCED_FACE('',(#112363),#112379,.T.); +#112363 = FACE_BOUND('',#112364,.T.); +#112364 = EDGE_LOOP('',(#112365,#112371,#112372,#112378)); +#112365 = ORIENTED_EDGE('',*,*,#112366,.T.); +#112366 = EDGE_CURVE('',#106796,#110010,#112367,.T.); +#112367 = LINE('',#112368,#112369); +#112368 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-0.936734073877)); +#112369 = VECTOR('',#112370,1.); +#112370 = DIRECTION('',(-1.,0.,-1.110223024625E-14)); +#112371 = ORIENTED_EDGE('',*,*,#110147,.F.); +#112372 = ORIENTED_EDGE('',*,*,#112373,.F.); +#112373 = EDGE_CURVE('',#106668,#110140,#112374,.T.); +#112374 = LINE('',#112375,#112376); +#112375 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.102691500902)); +#112376 = VECTOR('',#112377,1.); +#112377 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112378 = ORIENTED_EDGE('',*,*,#106803,.T.); +#112379 = PLANE('',#112380); +#112380 = AXIS2_PLACEMENT_3D('',#112381,#112382,#112383); +#112381 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.102691500902)); +#112382 = DIRECTION('',(0.,-0.986943948288,-0.161064095744)); +#112383 = DIRECTION('',(0.,0.161064095744,-0.986943948288)); +#112384 = ADVANCED_FACE('',(#112385),#112396,.T.); +#112385 = FACE_BOUND('',#112386,.T.); +#112386 = EDGE_LOOP('',(#112387,#112388,#112389,#112395)); +#112387 = ORIENTED_EDGE('',*,*,#112373,.T.); +#112388 = ORIENTED_EDGE('',*,*,#110139,.F.); +#112389 = ORIENTED_EDGE('',*,*,#112390,.F.); +#112390 = EDGE_CURVE('',#106666,#110132,#112391,.T.); +#112391 = LINE('',#112392,#112393); +#112392 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.296308499098)); +#112393 = VECTOR('',#112394,1.); +#112394 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112395 = ORIENTED_EDGE('',*,*,#106665,.T.); +#112396 = PLANE('',#112397); +#112397 = AXIS2_PLACEMENT_3D('',#112398,#112399,#112400); +#112398 = CARTESIAN_POINT('',(-6.575,-3.20995,-1.296308499098)); +#112399 = DIRECTION('',(0.,-1.,0.)); +#112400 = DIRECTION('',(0.,0.,-1.)); +#112401 = ADVANCED_FACE('',(#112402),#112413,.T.); +#112402 = FACE_BOUND('',#112403,.T.); +#112403 = EDGE_LOOP('',(#112404,#112405,#112406,#112412)); +#112404 = ORIENTED_EDGE('',*,*,#112390,.T.); +#112405 = ORIENTED_EDGE('',*,*,#110131,.F.); +#112406 = ORIENTED_EDGE('',*,*,#112407,.F.); +#112407 = EDGE_CURVE('',#106676,#110124,#112408,.T.); +#112408 = LINE('',#112409,#112410); +#112409 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-1.462265964866)); +#112410 = VECTOR('',#112411,1.); +#112411 = DIRECTION('',(-1.,0.,0.)); +#112412 = ORIENTED_EDGE('',*,*,#106675,.T.); +#112413 = PLANE('',#112414); +#112414 = AXIS2_PLACEMENT_3D('',#112415,#112416,#112417); +#112415 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-1.462265964866)); +#112416 = DIRECTION('',(0.,-0.986943954265,0.161064059119)); +#112417 = DIRECTION('',(-1.,0.,0.)); +#112418 = ADVANCED_FACE('',(#112419),#112430,.T.); +#112419 = FACE_BOUND('',#112420,.T.); +#112420 = EDGE_LOOP('',(#112421,#112422,#112423,#112429)); +#112421 = ORIENTED_EDGE('',*,*,#112407,.T.); +#112422 = ORIENTED_EDGE('',*,*,#110123,.F.); +#112423 = ORIENTED_EDGE('',*,*,#112424,.F.); +#112424 = EDGE_CURVE('',#106684,#110116,#112425,.T.); +#112425 = LINE('',#112426,#112427); +#112426 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-1.628223411262)); +#112427 = VECTOR('',#112428,1.); +#112428 = DIRECTION('',(-1.,0.,0.)); +#112429 = ORIENTED_EDGE('',*,*,#106683,.T.); +#112430 = PLANE('',#112431); +#112431 = AXIS2_PLACEMENT_3D('',#112432,#112433,#112434); +#112432 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-1.628223411262)); +#112433 = DIRECTION('',(0.,-0.837379388362,0.546622136349)); +#112434 = DIRECTION('',(-1.,0.,0.)); +#112435 = ADVANCED_FACE('',(#112436),#112447,.T.); +#112436 = FACE_BOUND('',#112437,.T.); +#112437 = EDGE_LOOP('',(#112438,#112439,#112440,#112446)); +#112438 = ORIENTED_EDGE('',*,*,#112424,.T.); +#112439 = ORIENTED_EDGE('',*,*,#110115,.F.); +#112440 = ORIENTED_EDGE('',*,*,#112441,.F.); +#112441 = EDGE_CURVE('',#106692,#110108,#112442,.T.); +#112442 = LINE('',#112443,#112444); +#112443 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-1.683542553604)); +#112444 = VECTOR('',#112445,1.); +#112445 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112446 = ORIENTED_EDGE('',*,*,#106691,.T.); +#112447 = PLANE('',#112448); +#112448 = AXIS2_PLACEMENT_3D('',#112449,#112450,#112451); +#112449 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-1.683542553604)); +#112450 = DIRECTION('',(0.,-0.562790931242,0.8265992788)); +#112451 = DIRECTION('',(-1.,0.,0.)); +#112452 = ADVANCED_FACE('',(#112453),#112464,.T.); +#112453 = FACE_BOUND('',#112454,.T.); +#112454 = EDGE_LOOP('',(#112455,#112456,#112457,#112463)); +#112455 = ORIENTED_EDGE('',*,*,#112441,.T.); +#112456 = ORIENTED_EDGE('',*,*,#110107,.F.); +#112457 = ORIENTED_EDGE('',*,*,#112458,.F.); +#112458 = EDGE_CURVE('',#106700,#110100,#112459,.T.); +#112459 = LINE('',#112460,#112461); +#112460 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.711202124774)); +#112461 = VECTOR('',#112462,1.); +#112462 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#112463 = ORIENTED_EDGE('',*,*,#106699,.T.); +#112464 = PLANE('',#112465); +#112465 = AXIS2_PLACEMENT_3D('',#112466,#112467,#112468); +#112466 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-1.711202124774)); +#112467 = DIRECTION('',(0.,-0.200123208493,0.979770739215)); +#112468 = DIRECTION('',(-1.,0.,0.)); +#112469 = ADVANCED_FACE('',(#112470),#112481,.T.); +#112470 = FACE_BOUND('',#112471,.T.); +#112471 = EDGE_LOOP('',(#112472,#112473,#112474,#112480)); +#112472 = ORIENTED_EDGE('',*,*,#112458,.T.); +#112473 = ORIENTED_EDGE('',*,*,#110099,.F.); +#112474 = ORIENTED_EDGE('',*,*,#112475,.F.); +#112475 = EDGE_CURVE('',#106708,#110092,#112476,.T.); +#112476 = LINE('',#112477,#112478); +#112477 = CARTESIAN_POINT('',(-6.575,-3.69745,-1.683542553604)); +#112478 = VECTOR('',#112479,1.); +#112479 = DIRECTION('',(-1.,0.,0.)); +#112480 = ORIENTED_EDGE('',*,*,#106707,.T.); +#112481 = PLANE('',#112482); +#112482 = AXIS2_PLACEMENT_3D('',#112483,#112484,#112485); +#112483 = CARTESIAN_POINT('',(-6.575,-3.69745,-1.683542553604)); +#112484 = DIRECTION('',(-0.,0.200123428343,0.97977069431)); +#112485 = DIRECTION('',(1.,0.,0.)); +#112486 = ADVANCED_FACE('',(#112487),#112498,.T.); +#112487 = FACE_BOUND('',#112488,.T.); +#112488 = EDGE_LOOP('',(#112489,#112490,#112491,#112497)); +#112489 = ORIENTED_EDGE('',*,*,#112475,.T.); +#112490 = ORIENTED_EDGE('',*,*,#110091,.F.); +#112491 = ORIENTED_EDGE('',*,*,#112492,.F.); +#112492 = EDGE_CURVE('',#106716,#110084,#112493,.T.); +#112493 = LINE('',#112494,#112495); +#112494 = CARTESIAN_POINT('',(-6.575,-3.7787,-1.628223411262)); +#112495 = VECTOR('',#112496,1.); +#112496 = DIRECTION('',(-1.,0.,0.)); +#112497 = ORIENTED_EDGE('',*,*,#106715,.T.); +#112498 = PLANE('',#112499); +#112499 = AXIS2_PLACEMENT_3D('',#112500,#112501,#112502); +#112500 = CARTESIAN_POINT('',(-6.575,-3.7787,-1.628223411262)); +#112501 = DIRECTION('',(-0.,0.562790931242,0.8265992788)); +#112502 = DIRECTION('',(1.,0.,0.)); +#112503 = ADVANCED_FACE('',(#112504),#112515,.T.); +#112504 = FACE_BOUND('',#112505,.T.); +#112505 = EDGE_LOOP('',(#112506,#112507,#112508,#112514)); +#112506 = ORIENTED_EDGE('',*,*,#112492,.T.); +#112507 = ORIENTED_EDGE('',*,*,#110083,.F.); +#112508 = ORIENTED_EDGE('',*,*,#112509,.F.); +#112509 = EDGE_CURVE('',#106724,#110076,#112510,.T.); +#112510 = LINE('',#112511,#112512); +#112511 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-1.462265964866)); +#112512 = VECTOR('',#112513,1.); +#112513 = DIRECTION('',(-1.,0.,-8.881784197002E-14)); +#112514 = ORIENTED_EDGE('',*,*,#106723,.T.); +#112515 = PLANE('',#112516); +#112516 = AXIS2_PLACEMENT_3D('',#112517,#112518,#112519); +#112517 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-1.462265964866)); +#112518 = DIRECTION('',(-0.,0.83737903044,0.546622684656)); +#112519 = DIRECTION('',(1.,0.,0.)); +#112520 = ADVANCED_FACE('',(#112521),#112532,.T.); +#112521 = FACE_BOUND('',#112522,.T.); +#112522 = EDGE_LOOP('',(#112523,#112524,#112525,#112531)); +#112523 = ORIENTED_EDGE('',*,*,#112509,.T.); +#112524 = ORIENTED_EDGE('',*,*,#110075,.F.); +#112525 = ORIENTED_EDGE('',*,*,#112526,.F.); +#112526 = EDGE_CURVE('',#106732,#110068,#112527,.T.); +#112527 = LINE('',#112528,#112529); +#112528 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.296308499098)); +#112529 = VECTOR('',#112530,1.); +#112530 = DIRECTION('',(-1.,0.,0.)); +#112531 = ORIENTED_EDGE('',*,*,#106731,.T.); +#112532 = PLANE('',#112533); +#112533 = AXIS2_PLACEMENT_3D('',#112534,#112535,#112536); +#112534 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.296308499098)); +#112535 = DIRECTION('',(-0.,0.986944100766,0.161063161412)); +#112536 = DIRECTION('',(1.,0.,0.)); +#112537 = ADVANCED_FACE('',(#112538),#112549,.T.); +#112538 = FACE_BOUND('',#112539,.T.); +#112539 = EDGE_LOOP('',(#112540,#112541,#112542,#112548)); +#112540 = ORIENTED_EDGE('',*,*,#112526,.T.); +#112541 = ORIENTED_EDGE('',*,*,#110067,.F.); +#112542 = ORIENTED_EDGE('',*,*,#112543,.F.); +#112543 = EDGE_CURVE('',#106740,#110060,#112544,.T.); +#112544 = LINE('',#112545,#112546); +#112545 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.102691500902)); +#112546 = VECTOR('',#112547,1.); +#112547 = DIRECTION('',(-1.,0.,0.)); +#112548 = ORIENTED_EDGE('',*,*,#106739,.T.); +#112549 = PLANE('',#112550); +#112550 = AXIS2_PLACEMENT_3D('',#112551,#112552,#112553); +#112551 = CARTESIAN_POINT('',(-6.575,-3.914116615009,-1.102691500902)); +#112552 = DIRECTION('',(-0.,1.,0.)); +#112553 = DIRECTION('',(1.,0.,0.)); +#112554 = ADVANCED_FACE('',(#112555),#112566,.T.); +#112555 = FACE_BOUND('',#112556,.T.); +#112556 = EDGE_LOOP('',(#112557,#112558,#112559,#112565)); +#112557 = ORIENTED_EDGE('',*,*,#112543,.T.); +#112558 = ORIENTED_EDGE('',*,*,#110059,.F.); +#112559 = ORIENTED_EDGE('',*,*,#112560,.F.); +#112560 = EDGE_CURVE('',#106748,#110052,#112561,.T.); +#112561 = LINE('',#112562,#112563); +#112562 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-0.936734073877)); +#112563 = VECTOR('',#112564,1.); +#112564 = DIRECTION('',(-1.,0.,-1.33226762955E-13)); +#112565 = ORIENTED_EDGE('',*,*,#106747,.T.); +#112566 = PLANE('',#112567); +#112567 = AXIS2_PLACEMENT_3D('',#112568,#112569,#112570); +#112568 = CARTESIAN_POINT('',(-6.575,-3.887033384991,-0.936734073877)); +#112569 = DIRECTION('',(0.,0.986944094789,-0.161063198037)); +#112570 = DIRECTION('',(-1.,0.,0.)); +#112571 = ADVANCED_FACE('',(#112572),#112583,.T.); +#112572 = FACE_BOUND('',#112573,.T.); +#112573 = EDGE_LOOP('',(#112574,#112575,#112576,#112582)); +#112574 = ORIENTED_EDGE('',*,*,#112560,.T.); +#112575 = ORIENTED_EDGE('',*,*,#110051,.F.); +#112576 = ORIENTED_EDGE('',*,*,#112577,.F.); +#112577 = EDGE_CURVE('',#106756,#110044,#112578,.T.); +#112578 = LINE('',#112579,#112580); +#112579 = CARTESIAN_POINT('',(-6.575,-3.7787,-0.770776569367)); +#112580 = VECTOR('',#112581,1.); +#112581 = DIRECTION('',(-1.,-4.440892098501E-14,-1.110223024625E-14)); +#112582 = ORIENTED_EDGE('',*,*,#106755,.T.); +#112583 = PLANE('',#112584); +#112584 = AXIS2_PLACEMENT_3D('',#112585,#112586,#112587); +#112585 = CARTESIAN_POINT('',(-6.575,-3.7787,-0.770776569367)); +#112586 = DIRECTION('',(0.,0.837379118056,-0.546622550435)); +#112587 = DIRECTION('',(-1.,0.,0.)); +#112588 = ADVANCED_FACE('',(#112589),#112600,.T.); +#112589 = FACE_BOUND('',#112590,.T.); +#112590 = EDGE_LOOP('',(#112591,#112592,#112593,#112599)); +#112591 = ORIENTED_EDGE('',*,*,#112577,.T.); +#112592 = ORIENTED_EDGE('',*,*,#110043,.F.); +#112593 = ORIENTED_EDGE('',*,*,#112594,.F.); +#112594 = EDGE_CURVE('',#106764,#110036,#112595,.T.); +#112595 = LINE('',#112596,#112597); +#112596 = CARTESIAN_POINT('',(-6.575,-3.69745,-0.715457427025)); +#112597 = VECTOR('',#112598,1.); +#112598 = DIRECTION('',(-1.,0.,0.)); +#112599 = ORIENTED_EDGE('',*,*,#106763,.T.); +#112600 = PLANE('',#112601); +#112601 = AXIS2_PLACEMENT_3D('',#112602,#112603,#112604); +#112602 = CARTESIAN_POINT('',(-6.575,-3.69745,-0.715457427025)); +#112603 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#112604 = DIRECTION('',(-1.,0.,0.)); +#112605 = ADVANCED_FACE('',(#112606),#112617,.T.); +#112606 = FACE_BOUND('',#112607,.T.); +#112607 = EDGE_LOOP('',(#112608,#112609,#112610,#112616)); +#112608 = ORIENTED_EDGE('',*,*,#112594,.T.); +#112609 = ORIENTED_EDGE('',*,*,#110035,.F.); +#112610 = ORIENTED_EDGE('',*,*,#112611,.F.); +#112611 = EDGE_CURVE('',#106772,#110028,#112612,.T.); +#112612 = LINE('',#112613,#112614); +#112613 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.687797855854)); +#112614 = VECTOR('',#112615,1.); +#112615 = DIRECTION('',(-1.,0.,0.)); +#112616 = ORIENTED_EDGE('',*,*,#106771,.T.); +#112617 = PLANE('',#112618); +#112618 = AXIS2_PLACEMENT_3D('',#112619,#112620,#112621); +#112619 = CARTESIAN_POINT('',(-6.575,-3.562033384991,-0.687797855854)); +#112620 = DIRECTION('',(0.,0.200123428343,-0.97977069431)); +#112621 = DIRECTION('',(-1.,0.,0.)); +#112622 = ADVANCED_FACE('',(#112623),#112634,.T.); +#112623 = FACE_BOUND('',#112624,.T.); +#112624 = EDGE_LOOP('',(#112625,#112626,#112627,#112633)); +#112625 = ORIENTED_EDGE('',*,*,#112611,.T.); +#112626 = ORIENTED_EDGE('',*,*,#110027,.F.); +#112627 = ORIENTED_EDGE('',*,*,#112628,.F.); +#112628 = EDGE_CURVE('',#106780,#110020,#112629,.T.); +#112629 = LINE('',#112630,#112631); +#112630 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-0.715457427025)); +#112631 = VECTOR('',#112632,1.); +#112632 = DIRECTION('',(-1.,-4.440892098501E-14,0.)); +#112633 = ORIENTED_EDGE('',*,*,#106779,.T.); +#112634 = PLANE('',#112635); +#112635 = AXIS2_PLACEMENT_3D('',#112636,#112637,#112638); +#112636 = CARTESIAN_POINT('',(-6.575,-3.426616615009,-0.715457427025)); +#112637 = DIRECTION('',(0.,-0.200123208493,-0.979770739215)); +#112638 = DIRECTION('',(0.,-0.979770739215,0.200123208493)); +#112639 = ADVANCED_FACE('',(#112640),#112651,.T.); +#112640 = FACE_BOUND('',#112641,.T.); +#112641 = EDGE_LOOP('',(#112642,#112643,#112644,#112650)); +#112642 = ORIENTED_EDGE('',*,*,#112628,.T.); +#112643 = ORIENTED_EDGE('',*,*,#110019,.F.); +#112644 = ORIENTED_EDGE('',*,*,#112645,.F.); +#112645 = EDGE_CURVE('',#106788,#110012,#112646,.T.); +#112646 = LINE('',#112647,#112648); +#112647 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-0.770776569367)); +#112648 = VECTOR('',#112649,1.); +#112649 = DIRECTION('',(-1.,0.,0.)); +#112650 = ORIENTED_EDGE('',*,*,#106787,.T.); +#112651 = PLANE('',#112652); +#112652 = AXIS2_PLACEMENT_3D('',#112653,#112654,#112655); +#112653 = CARTESIAN_POINT('',(-6.575,-3.345366615009,-0.770776569367)); +#112654 = DIRECTION('',(0.,-0.562790931242,-0.8265992788)); +#112655 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#112656 = ADVANCED_FACE('',(#112657),#112663,.T.); +#112657 = FACE_BOUND('',#112658,.T.); +#112658 = EDGE_LOOP('',(#112659,#112660,#112661,#112662)); +#112659 = ORIENTED_EDGE('',*,*,#112645,.T.); +#112660 = ORIENTED_EDGE('',*,*,#110009,.F.); +#112661 = ORIENTED_EDGE('',*,*,#112366,.F.); +#112662 = ORIENTED_EDGE('',*,*,#106795,.T.); +#112663 = PLANE('',#112664); +#112664 = AXIS2_PLACEMENT_3D('',#112665,#112666,#112667); +#112665 = CARTESIAN_POINT('',(-6.575,-3.237033384991,-0.936734073877)); +#112666 = DIRECTION('',(0.,-0.837379475978,-0.546622002129)); +#112667 = DIRECTION('',(0.,0.546622002129,-0.837379475978)); +#112668 = ADVANCED_FACE('',(#112669),#112685,.T.); +#112669 = FACE_BOUND('',#112670,.T.); +#112670 = EDGE_LOOP('',(#112671,#112677,#112678,#112684)); +#112671 = ORIENTED_EDGE('',*,*,#112672,.T.); +#112672 = EDGE_CURVE('',#108534,#110162,#112673,.T.); +#112673 = LINE('',#112674,#112675); +#112674 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.628223411262)); +#112675 = VECTOR('',#112676,1.); +#112676 = DIRECTION('',(-1.,8.881784197002E-14,-1.110223024625E-13)); +#112677 = ORIENTED_EDGE('',*,*,#110611,.F.); +#112678 = ORIENTED_EDGE('',*,*,#112679,.F.); +#112679 = EDGE_CURVE('',#108094,#110604,#112680,.T.); +#112680 = LINE('',#112681,#112682); +#112681 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.711202124774)); +#112682 = VECTOR('',#112683,1.); +#112683 = DIRECTION('',(-1.,-8.881784197002E-14,2.220446049251E-14)); +#112684 = ORIENTED_EDGE('',*,*,#108541,.T.); +#112685 = PLANE('',#112686); +#112686 = AXIS2_PLACEMENT_3D('',#112687,#112688,#112689); +#112687 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.711202124774)); +#112688 = DIRECTION('',(0.,-0.837378643312,-0.546623277701)); +#112689 = DIRECTION('',(0.,0.546623277701,-0.837378643312)); +#112690 = ADVANCED_FACE('',(#112691),#112702,.T.); +#112691 = FACE_BOUND('',#112692,.T.); +#112692 = EDGE_LOOP('',(#112693,#112694,#112695,#112701)); +#112693 = ORIENTED_EDGE('',*,*,#112679,.T.); +#112694 = ORIENTED_EDGE('',*,*,#110603,.F.); +#112695 = ORIENTED_EDGE('',*,*,#112696,.F.); +#112696 = EDGE_CURVE('',#108092,#110596,#112697,.T.); +#112697 = LINE('',#112698,#112699); +#112698 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.766521276802)); +#112699 = VECTOR('',#112700,1.); +#112700 = DIRECTION('',(-1.,0.,0.)); +#112701 = ORIENTED_EDGE('',*,*,#108091,.T.); +#112702 = PLANE('',#112703); +#112703 = AXIS2_PLACEMENT_3D('',#112704,#112705,#112706); +#112704 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.766521276802)); +#112705 = DIRECTION('',(0.,-0.56279099857,-0.826599232959)); +#112706 = DIRECTION('',(0.,-0.826599232959,0.56279099857)); +#112707 = ADVANCED_FACE('',(#112708),#112719,.T.); +#112708 = FACE_BOUND('',#112709,.T.); +#112709 = EDGE_LOOP('',(#112710,#112711,#112712,#112718)); +#112710 = ORIENTED_EDGE('',*,*,#112696,.T.); +#112711 = ORIENTED_EDGE('',*,*,#110595,.F.); +#112712 = ORIENTED_EDGE('',*,*,#112713,.F.); +#112713 = EDGE_CURVE('',#108102,#110588,#112714,.T.); +#112714 = LINE('',#112715,#112716); +#112715 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.821840426408)); +#112716 = VECTOR('',#112717,1.); +#112717 = DIRECTION('',(-1.,0.,0.)); +#112718 = ORIENTED_EDGE('',*,*,#108101,.T.); +#112719 = PLANE('',#112720); +#112720 = AXIS2_PLACEMENT_3D('',#112721,#112722,#112723); +#112721 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.821840426408)); +#112722 = DIRECTION('',(0.,-0.454777504925,-0.890605087014)); +#112723 = DIRECTION('',(0.,-0.890605087014,0.454777504925)); +#112724 = ADVANCED_FACE('',(#112725),#112736,.T.); +#112725 = FACE_BOUND('',#112726,.T.); +#112726 = EDGE_LOOP('',(#112727,#112728,#112729,#112735)); +#112727 = ORIENTED_EDGE('',*,*,#112713,.T.); +#112728 = ORIENTED_EDGE('',*,*,#110587,.F.); +#112729 = ORIENTED_EDGE('',*,*,#112730,.F.); +#112730 = EDGE_CURVE('',#108110,#110580,#112731,.T.); +#112731 = LINE('',#112732,#112733); +#112732 = CARTESIAN_POINT('',(-6.575,-4.862033230019,-1.8495)); +#112733 = VECTOR('',#112734,1.); +#112734 = DIRECTION('',(-1.,0.,0.)); +#112735 = ORIENTED_EDGE('',*,*,#108109,.T.); +#112736 = PLANE('',#112737); +#112737 = AXIS2_PLACEMENT_3D('',#112738,#112739,#112740); +#112738 = CARTESIAN_POINT('',(-6.575,-4.862033230019,-1.8495)); +#112739 = DIRECTION('',(0.,-0.247382794943,-0.9689178256)); +#112740 = DIRECTION('',(0.,-0.9689178256,0.247382794943)); +#112741 = ADVANCED_FACE('',(#112742),#112753,.T.); +#112742 = FACE_BOUND('',#112743,.T.); +#112743 = EDGE_LOOP('',(#112744,#112745,#112746,#112752)); +#112744 = ORIENTED_EDGE('',*,*,#112730,.T.); +#112745 = ORIENTED_EDGE('',*,*,#110579,.F.); +#112746 = ORIENTED_EDGE('',*,*,#112747,.F.); +#112747 = EDGE_CURVE('',#108118,#110572,#112748,.T.); +#112748 = LINE('',#112749,#112750); +#112749 = CARTESIAN_POINT('',(-6.575,-4.645366769981,-1.8495)); +#112750 = VECTOR('',#112751,1.); +#112751 = DIRECTION('',(-1.,0.,0.)); +#112752 = ORIENTED_EDGE('',*,*,#108117,.T.); +#112753 = PLANE('',#112754); +#112754 = AXIS2_PLACEMENT_3D('',#112755,#112756,#112757); +#112755 = CARTESIAN_POINT('',(-6.575,-4.645366769981,-1.8495)); +#112756 = DIRECTION('',(0.,0.,-1.)); +#112757 = DIRECTION('',(0.,-1.,0.)); +#112758 = ADVANCED_FACE('',(#112759),#112770,.T.); +#112759 = FACE_BOUND('',#112760,.T.); +#112760 = EDGE_LOOP('',(#112761,#112762,#112763,#112769)); +#112761 = ORIENTED_EDGE('',*,*,#112747,.T.); +#112762 = ORIENTED_EDGE('',*,*,#110571,.F.); +#112763 = ORIENTED_EDGE('',*,*,#112764,.F.); +#112764 = EDGE_CURVE('',#108126,#110564,#112765,.T.); +#112765 = LINE('',#112766,#112767); +#112766 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.821840426408)); +#112767 = VECTOR('',#112768,1.); +#112768 = DIRECTION('',(-1.,0.,0.)); +#112769 = ORIENTED_EDGE('',*,*,#108125,.T.); +#112770 = PLANE('',#112771); +#112771 = AXIS2_PLACEMENT_3D('',#112772,#112773,#112774); +#112772 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.821840426408)); +#112773 = DIRECTION('',(0.,0.247382794943,-0.9689178256)); +#112774 = DIRECTION('',(-1.,0.,0.)); +#112775 = ADVANCED_FACE('',(#112776),#112787,.T.); +#112776 = FACE_BOUND('',#112777,.T.); +#112777 = EDGE_LOOP('',(#112778,#112779,#112780,#112786)); +#112778 = ORIENTED_EDGE('',*,*,#112764,.T.); +#112779 = ORIENTED_EDGE('',*,*,#110563,.F.); +#112780 = ORIENTED_EDGE('',*,*,#112781,.F.); +#112781 = EDGE_CURVE('',#108134,#110556,#112782,.T.); +#112782 = LINE('',#112783,#112784); +#112783 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.766521276802)); +#112784 = VECTOR('',#112785,1.); +#112785 = DIRECTION('',(-1.,0.,0.)); +#112786 = ORIENTED_EDGE('',*,*,#108133,.T.); +#112787 = PLANE('',#112788); +#112788 = AXIS2_PLACEMENT_3D('',#112789,#112790,#112791); +#112789 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.766521276802)); +#112790 = DIRECTION('',(0.,0.454777504925,-0.890605087014)); +#112791 = DIRECTION('',(-1.,0.,0.)); +#112792 = ADVANCED_FACE('',(#112793),#112804,.T.); +#112793 = FACE_BOUND('',#112794,.T.); +#112794 = EDGE_LOOP('',(#112795,#112796,#112797,#112803)); +#112795 = ORIENTED_EDGE('',*,*,#112781,.T.); +#112796 = ORIENTED_EDGE('',*,*,#110555,.F.); +#112797 = ORIENTED_EDGE('',*,*,#112798,.F.); +#112798 = EDGE_CURVE('',#108142,#110548,#112799,.T.); +#112799 = LINE('',#112800,#112801); +#112800 = CARTESIAN_POINT('',(-6.575,-4.34745,-1.711202124774)); +#112801 = VECTOR('',#112802,1.); +#112802 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#112803 = ORIENTED_EDGE('',*,*,#108141,.T.); +#112804 = PLANE('',#112805); +#112805 = AXIS2_PLACEMENT_3D('',#112806,#112807,#112808); +#112806 = CARTESIAN_POINT('',(-6.575,-4.34745,-1.711202124774)); +#112807 = DIRECTION('',(0.,0.56279099857,-0.826599232959)); +#112808 = DIRECTION('',(-1.,0.,0.)); +#112809 = ADVANCED_FACE('',(#112810),#112821,.T.); +#112810 = FACE_BOUND('',#112811,.T.); +#112811 = EDGE_LOOP('',(#112812,#112813,#112814,#112820)); +#112812 = ORIENTED_EDGE('',*,*,#112798,.T.); +#112813 = ORIENTED_EDGE('',*,*,#110547,.F.); +#112814 = ORIENTED_EDGE('',*,*,#112815,.F.); +#112815 = EDGE_CURVE('',#108150,#110540,#112816,.T.); +#112816 = LINE('',#112817,#112818); +#112817 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-1.628223411262)); +#112818 = VECTOR('',#112819,1.); +#112819 = DIRECTION('',(-1.,-8.881784197002E-14,0.)); +#112820 = ORIENTED_EDGE('',*,*,#108149,.T.); +#112821 = PLANE('',#112822); +#112822 = AXIS2_PLACEMENT_3D('',#112823,#112824,#112825); +#112823 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-1.628223411262)); +#112824 = DIRECTION('',(0.,0.837378643312,-0.546623277701)); +#112825 = DIRECTION('',(-1.,0.,0.)); +#112826 = ADVANCED_FACE('',(#112827),#112838,.T.); +#112827 = FACE_BOUND('',#112828,.T.); +#112828 = EDGE_LOOP('',(#112829,#112830,#112831,#112837)); +#112829 = ORIENTED_EDGE('',*,*,#112815,.T.); +#112830 = ORIENTED_EDGE('',*,*,#110539,.F.); +#112831 = ORIENTED_EDGE('',*,*,#112832,.F.); +#112832 = EDGE_CURVE('',#108158,#110532,#112833,.T.); +#112833 = LINE('',#112834,#112835); +#112834 = CARTESIAN_POINT('',(-6.575,-4.2662,-1.545244678378)); +#112835 = VECTOR('',#112836,1.); +#112836 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#112837 = ORIENTED_EDGE('',*,*,#108157,.T.); +#112838 = PLANE('',#112839); +#112839 = AXIS2_PLACEMENT_3D('',#112840,#112841,#112842); +#112840 = CARTESIAN_POINT('',(-6.575,-4.2662,-1.545244678378)); +#112841 = DIRECTION('',(0.,0.950645562605,-0.310278929834)); +#112842 = DIRECTION('',(-1.,0.,0.)); +#112843 = ADVANCED_FACE('',(#112844),#112855,.T.); +#112844 = FACE_BOUND('',#112845,.T.); +#112845 = EDGE_LOOP('',(#112846,#112847,#112848,#112854)); +#112846 = ORIENTED_EDGE('',*,*,#112832,.T.); +#112847 = ORIENTED_EDGE('',*,*,#110531,.F.); +#112848 = ORIENTED_EDGE('',*,*,#112849,.F.); +#112849 = EDGE_CURVE('',#108166,#110524,#112850,.T.); +#112850 = LINE('',#112851,#112852); +#112851 = CARTESIAN_POINT('',(-6.575,-4.401616769981,-1.545244678378)); +#112852 = VECTOR('',#112853,1.); +#112853 = DIRECTION('',(-1.,0.,0.)); +#112854 = ORIENTED_EDGE('',*,*,#108165,.T.); +#112855 = PLANE('',#112856); +#112856 = AXIS2_PLACEMENT_3D('',#112857,#112858,#112859); +#112857 = CARTESIAN_POINT('',(-6.575,-4.401616769981,-1.545244678378)); +#112858 = DIRECTION('',(0.,0.,1.)); +#112859 = DIRECTION('',(1.,0.,-0.)); +#112860 = ADVANCED_FACE('',(#112861),#112872,.T.); +#112861 = FACE_BOUND('',#112862,.T.); +#112862 = EDGE_LOOP('',(#112863,#112864,#112865,#112871)); +#112863 = ORIENTED_EDGE('',*,*,#112849,.T.); +#112864 = ORIENTED_EDGE('',*,*,#110523,.F.); +#112865 = ORIENTED_EDGE('',*,*,#112866,.F.); +#112866 = EDGE_CURVE('',#108174,#110516,#112867,.T.); +#112867 = LINE('',#112868,#112869); +#112868 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.60056382072)); +#112869 = VECTOR('',#112870,1.); +#112870 = DIRECTION('',(-1.,0.,-2.220446049251E-14)); +#112871 = ORIENTED_EDGE('',*,*,#108173,.T.); +#112872 = PLANE('',#112873); +#112873 = AXIS2_PLACEMENT_3D('',#112874,#112875,#112876); +#112874 = CARTESIAN_POINT('',(-6.575,-4.4287,-1.60056382072)); +#112875 = DIRECTION('',(0.,-0.898138759605,0.439712142766)); +#112876 = DIRECTION('',(-1.,0.,0.)); +#112877 = ADVANCED_FACE('',(#112878),#112889,.T.); +#112878 = FACE_BOUND('',#112879,.T.); +#112879 = EDGE_LOOP('',(#112880,#112881,#112882,#112888)); +#112880 = ORIENTED_EDGE('',*,*,#112866,.T.); +#112881 = ORIENTED_EDGE('',*,*,#110515,.F.); +#112882 = ORIENTED_EDGE('',*,*,#112883,.F.); +#112883 = EDGE_CURVE('',#108182,#110508,#112884,.T.); +#112884 = LINE('',#112885,#112886); +#112885 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-1.655882982433)); +#112886 = VECTOR('',#112887,1.); +#112887 = DIRECTION('',(-1.,0.,0.)); +#112888 = ORIENTED_EDGE('',*,*,#108181,.T.); +#112889 = PLANE('',#112890); +#112890 = AXIS2_PLACEMENT_3D('',#112891,#112892,#112893); +#112891 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-1.655882982433)); +#112892 = DIRECTION('',(0.,-0.714509840205,0.69962539137)); +#112893 = DIRECTION('',(-1.,0.,0.)); +#112894 = ADVANCED_FACE('',(#112895),#112906,.T.); +#112895 = FACE_BOUND('',#112896,.T.); +#112896 = EDGE_LOOP('',(#112897,#112898,#112899,#112905)); +#112897 = ORIENTED_EDGE('',*,*,#112883,.T.); +#112898 = ORIENTED_EDGE('',*,*,#110507,.F.); +#112899 = ORIENTED_EDGE('',*,*,#112900,.F.); +#112900 = EDGE_CURVE('',#108190,#110500,#112901,.T.); +#112901 = LINE('',#112902,#112903); +#112902 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.683542553604)); +#112903 = VECTOR('',#112904,1.); +#112904 = DIRECTION('',(-1.,0.,0.)); +#112905 = ORIENTED_EDGE('',*,*,#108189,.T.); +#112906 = PLANE('',#112907); +#112907 = AXIS2_PLACEMENT_3D('',#112908,#112909,#112910); +#112908 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-1.683542553604)); +#112909 = DIRECTION('',(0.,-0.454778489585,0.890604584207)); +#112910 = DIRECTION('',(-1.,0.,0.)); +#112911 = ADVANCED_FACE('',(#112912),#112923,.T.); +#112912 = FACE_BOUND('',#112913,.T.); +#112913 = EDGE_LOOP('',(#112914,#112915,#112916,#112922)); +#112914 = ORIENTED_EDGE('',*,*,#112900,.T.); +#112915 = ORIENTED_EDGE('',*,*,#110499,.F.); +#112916 = ORIENTED_EDGE('',*,*,#112917,.F.); +#112917 = EDGE_CURVE('',#108198,#110492,#112918,.T.); +#112918 = LINE('',#112919,#112920); +#112919 = CARTESIAN_POINT('',(-6.575,-4.67245,-1.711202124774)); +#112920 = VECTOR('',#112921,1.); +#112921 = DIRECTION('',(-1.,0.,0.)); +#112922 = ORIENTED_EDGE('',*,*,#108197,.T.); +#112923 = PLANE('',#112924); +#112924 = AXIS2_PLACEMENT_3D('',#112925,#112926,#112927); +#112925 = CARTESIAN_POINT('',(-6.575,-4.67245,-1.711202124774)); +#112926 = DIRECTION('',(0.,-0.200123208493,0.979770739215)); +#112927 = DIRECTION('',(-1.,0.,0.)); +#112928 = ADVANCED_FACE('',(#112929),#112940,.T.); +#112929 = FACE_BOUND('',#112930,.T.); +#112930 = EDGE_LOOP('',(#112931,#112932,#112933,#112939)); +#112931 = ORIENTED_EDGE('',*,*,#112917,.T.); +#112932 = ORIENTED_EDGE('',*,*,#110491,.F.); +#112933 = ORIENTED_EDGE('',*,*,#112934,.F.); +#112934 = EDGE_CURVE('',#108206,#110484,#112935,.T.); +#112935 = LINE('',#112936,#112937); +#112936 = CARTESIAN_POINT('',(-6.575,-4.83495,-1.711202124774)); +#112937 = VECTOR('',#112938,1.); +#112938 = DIRECTION('',(-1.,0.,0.)); +#112939 = ORIENTED_EDGE('',*,*,#108205,.T.); +#112940 = PLANE('',#112941); +#112941 = AXIS2_PLACEMENT_3D('',#112942,#112943,#112944); +#112942 = CARTESIAN_POINT('',(-6.575,-4.83495,-1.711202124774)); +#112943 = DIRECTION('',(0.,0.,1.)); +#112944 = DIRECTION('',(1.,0.,-0.)); +#112945 = ADVANCED_FACE('',(#112946),#112957,.T.); +#112946 = FACE_BOUND('',#112947,.T.); +#112947 = EDGE_LOOP('',(#112948,#112949,#112950,#112956)); +#112948 = ORIENTED_EDGE('',*,*,#112934,.T.); +#112949 = ORIENTED_EDGE('',*,*,#110483,.F.); +#112950 = ORIENTED_EDGE('',*,*,#112951,.F.); +#112951 = EDGE_CURVE('',#108214,#110476,#112952,.T.); +#112952 = LINE('',#112953,#112954); +#112953 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.683542553604)); +#112954 = VECTOR('',#112955,1.); +#112955 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#112956 = ORIENTED_EDGE('',*,*,#108213,.T.); +#112957 = PLANE('',#112958); +#112958 = AXIS2_PLACEMENT_3D('',#112959,#112960,#112961); +#112959 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.683542553604)); +#112960 = DIRECTION('',(-0.,0.200123208493,0.979770739215)); +#112961 = DIRECTION('',(1.,0.,0.)); +#112962 = ADVANCED_FACE('',(#112963),#112974,.T.); +#112963 = FACE_BOUND('',#112964,.T.); +#112964 = EDGE_LOOP('',(#112965,#112966,#112967,#112973)); +#112965 = ORIENTED_EDGE('',*,*,#112951,.T.); +#112966 = ORIENTED_EDGE('',*,*,#110475,.F.); +#112967 = ORIENTED_EDGE('',*,*,#112968,.F.); +#112968 = EDGE_CURVE('',#108222,#110468,#112969,.T.); +#112969 = LINE('',#112970,#112971); +#112970 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.655882982433)); +#112971 = VECTOR('',#112972,1.); +#112972 = DIRECTION('',(-1.,0.,0.)); +#112973 = ORIENTED_EDGE('',*,*,#108221,.T.); +#112974 = PLANE('',#112975); +#112975 = AXIS2_PLACEMENT_3D('',#112976,#112977,#112978); +#112976 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.655882982433)); +#112977 = DIRECTION('',(-0.,0.454778489585,0.890604584207)); +#112978 = DIRECTION('',(1.,0.,0.)); +#112979 = ADVANCED_FACE('',(#112980),#112991,.T.); +#112980 = FACE_BOUND('',#112981,.T.); +#112981 = EDGE_LOOP('',(#112982,#112983,#112984,#112990)); +#112982 = ORIENTED_EDGE('',*,*,#112968,.T.); +#112983 = ORIENTED_EDGE('',*,*,#110467,.F.); +#112984 = ORIENTED_EDGE('',*,*,#112985,.F.); +#112985 = EDGE_CURVE('',#108230,#110460,#112986,.T.); +#112986 = LINE('',#112987,#112988); +#112987 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.60056382072)); +#112988 = VECTOR('',#112989,1.); +#112989 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#112990 = ORIENTED_EDGE('',*,*,#108229,.T.); +#112991 = PLANE('',#112992); +#112992 = AXIS2_PLACEMENT_3D('',#112993,#112994,#112995); +#112993 = CARTESIAN_POINT('',(-6.575,-5.0787,-1.60056382072)); +#112994 = DIRECTION('',(-0.,0.714509840205,0.69962539137)); +#112995 = DIRECTION('',(1.,0.,0.)); +#112996 = ADVANCED_FACE('',(#112997),#113008,.T.); +#112997 = FACE_BOUND('',#112998,.T.); +#112998 = EDGE_LOOP('',(#112999,#113000,#113001,#113007)); +#112999 = ORIENTED_EDGE('',*,*,#112985,.T.); +#113000 = ORIENTED_EDGE('',*,*,#110459,.F.); +#113001 = ORIENTED_EDGE('',*,*,#113002,.F.); +#113002 = EDGE_CURVE('',#108238,#110452,#113003,.T.); +#113003 = LINE('',#113004,#113005); +#113004 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.545244678378)); +#113005 = VECTOR('',#113006,1.); +#113006 = DIRECTION('',(-1.,-8.881784197002E-14,8.881784197002E-14)); +#113007 = ORIENTED_EDGE('',*,*,#108237,.T.); +#113008 = PLANE('',#113009); +#113009 = AXIS2_PLACEMENT_3D('',#113010,#113011,#113012); +#113010 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.545244678378)); +#113011 = DIRECTION('',(-0.,0.898138759605,0.439712142766)); +#113012 = DIRECTION('',(1.,0.,0.)); +#113013 = ADVANCED_FACE('',(#113014),#113025,.T.); +#113014 = FACE_BOUND('',#113015,.T.); +#113015 = EDGE_LOOP('',(#113016,#113017,#113018,#113024)); +#113016 = ORIENTED_EDGE('',*,*,#113002,.T.); +#113017 = ORIENTED_EDGE('',*,*,#110451,.F.); +#113018 = ORIENTED_EDGE('',*,*,#113019,.F.); +#113019 = EDGE_CURVE('',#108246,#110444,#113020,.T.); +#113020 = LINE('',#113021,#113022); +#113021 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.434606393695)); +#113022 = VECTOR('',#113023,1.); +#113023 = DIRECTION('',(-1.,-8.881784197002E-14,-2.220446049251E-14)); +#113024 = ORIENTED_EDGE('',*,*,#108245,.T.); +#113025 = PLANE('',#113026); +#113026 = AXIS2_PLACEMENT_3D('',#113027,#113028,#113029); +#113027 = CARTESIAN_POINT('',(-6.575,-5.105783230019,-1.434606393695)); +#113028 = DIRECTION('',(-0.,1.,0.)); +#113029 = DIRECTION('',(1.,0.,0.)); +#113030 = ADVANCED_FACE('',(#113031),#113042,.T.); +#113031 = FACE_BOUND('',#113032,.T.); +#113032 = EDGE_LOOP('',(#113033,#113034,#113035,#113041)); +#113033 = ORIENTED_EDGE('',*,*,#113019,.T.); +#113034 = ORIENTED_EDGE('',*,*,#110443,.F.); +#113035 = ORIENTED_EDGE('',*,*,#113036,.F.); +#113036 = EDGE_CURVE('',#108254,#110436,#113037,.T.); +#113037 = LINE('',#113038,#113039); +#113038 = CARTESIAN_POINT('',(-6.575,-5.051616769981,-1.323968070269)); +#113039 = VECTOR('',#113040,1.); +#113040 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#113041 = ORIENTED_EDGE('',*,*,#108253,.T.); +#113042 = PLANE('',#113043); +#113043 = AXIS2_PLACEMENT_3D('',#113044,#113045,#113046); +#113044 = CARTESIAN_POINT('',(-6.575,-5.051616769981,-1.323968070269)); +#113045 = DIRECTION('',(0.,0.898138820414,-0.43971201856)); +#113046 = DIRECTION('',(-1.,0.,0.)); +#113047 = ADVANCED_FACE('',(#113048),#113059,.T.); +#113048 = FACE_BOUND('',#113049,.T.); +#113049 = EDGE_LOOP('',(#113050,#113051,#113052,#113058)); +#113050 = ORIENTED_EDGE('',*,*,#113036,.T.); +#113051 = ORIENTED_EDGE('',*,*,#110435,.F.); +#113052 = ORIENTED_EDGE('',*,*,#113053,.F.); +#113053 = EDGE_CURVE('',#108262,#110428,#113054,.T.); +#113054 = LINE('',#113055,#113056); +#113055 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.268648927927)); +#113056 = VECTOR('',#113057,1.); +#113057 = DIRECTION('',(-1.,0.,0.)); +#113058 = ORIENTED_EDGE('',*,*,#108261,.T.); +#113059 = PLANE('',#113060); +#113060 = AXIS2_PLACEMENT_3D('',#113061,#113062,#113063); +#113061 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.268648927927)); +#113062 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#113063 = DIRECTION('',(-1.,0.,0.)); +#113064 = ADVANCED_FACE('',(#113065),#113076,.T.); +#113065 = FACE_BOUND('',#113066,.T.); +#113066 = EDGE_LOOP('',(#113067,#113068,#113069,#113075)); +#113067 = ORIENTED_EDGE('',*,*,#113053,.T.); +#113068 = ORIENTED_EDGE('',*,*,#110427,.F.); +#113069 = ORIENTED_EDGE('',*,*,#113070,.F.); +#113070 = EDGE_CURVE('',#108270,#110420,#113071,.T.); +#113071 = LINE('',#113072,#113073); +#113072 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.240989356756)); +#113073 = VECTOR('',#113074,1.); +#113074 = DIRECTION('',(-1.,0.,0.)); +#113075 = ORIENTED_EDGE('',*,*,#108269,.T.); +#113076 = PLANE('',#113077); +#113077 = AXIS2_PLACEMENT_3D('',#113078,#113079,#113080); +#113078 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.240989356756)); +#113079 = DIRECTION('',(0.,0.167799328608,-0.985821173093)); +#113080 = DIRECTION('',(-1.,0.,0.)); +#113081 = ADVANCED_FACE('',(#113082),#113093,.T.); +#113082 = FACE_BOUND('',#113083,.T.); +#113083 = EDGE_LOOP('',(#113084,#113085,#113086,#113092)); +#113084 = ORIENTED_EDGE('',*,*,#113070,.T.); +#113085 = ORIENTED_EDGE('',*,*,#110419,.F.); +#113086 = ORIENTED_EDGE('',*,*,#113087,.F.); +#113087 = EDGE_CURVE('',#108278,#110412,#113088,.T.); +#113088 = LINE('',#113089,#113090); +#113089 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.240989356756)); +#113090 = VECTOR('',#113091,1.); +#113091 = DIRECTION('',(-1.,-8.881784197002E-14,0.)); +#113092 = ORIENTED_EDGE('',*,*,#108277,.T.); +#113093 = PLANE('',#113094); +#113094 = AXIS2_PLACEMENT_3D('',#113095,#113096,#113097); +#113095 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.240989356756)); +#113096 = DIRECTION('',(0.,0.,-1.)); +#113097 = DIRECTION('',(0.,-1.,0.)); +#113098 = ADVANCED_FACE('',(#113099),#113110,.T.); +#113099 = FACE_BOUND('',#113100,.T.); +#113100 = EDGE_LOOP('',(#113101,#113102,#113103,#113109)); +#113101 = ORIENTED_EDGE('',*,*,#113087,.T.); +#113102 = ORIENTED_EDGE('',*,*,#110411,.F.); +#113103 = ORIENTED_EDGE('',*,*,#113104,.F.); +#113104 = EDGE_CURVE('',#108286,#110404,#113105,.T.); +#113105 = LINE('',#113106,#113107); +#113106 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.130351072073)); +#113107 = VECTOR('',#113108,1.); +#113108 = DIRECTION('',(-1.,-8.881784197002E-14,0.)); +#113109 = ORIENTED_EDGE('',*,*,#108285,.T.); +#113110 = PLANE('',#113111); +#113111 = AXIS2_PLACEMENT_3D('',#113112,#113113,#113114); +#113112 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-1.130351072073)); +#113113 = DIRECTION('',(-0.,1.,0.)); +#113114 = DIRECTION('',(1.,0.,0.)); +#113115 = ADVANCED_FACE('',(#113116),#113127,.T.); +#113116 = FACE_BOUND('',#113117,.T.); +#113117 = EDGE_LOOP('',(#113118,#113119,#113120,#113126)); +#113118 = ORIENTED_EDGE('',*,*,#113104,.T.); +#113119 = ORIENTED_EDGE('',*,*,#110403,.F.); +#113120 = ORIENTED_EDGE('',*,*,#113121,.F.); +#113121 = EDGE_CURVE('',#108294,#110396,#113122,.T.); +#113122 = LINE('',#113123,#113124); +#113123 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.130351072073)); +#113124 = VECTOR('',#113125,1.); +#113125 = DIRECTION('',(-1.,0.,0.)); +#113126 = ORIENTED_EDGE('',*,*,#108293,.T.); +#113127 = PLANE('',#113128); +#113128 = AXIS2_PLACEMENT_3D('',#113129,#113130,#113131); +#113129 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-1.130351072073)); +#113130 = DIRECTION('',(0.,0.,1.)); +#113131 = DIRECTION('',(1.,0.,-0.)); +#113132 = ADVANCED_FACE('',(#113133),#113144,.T.); +#113133 = FACE_BOUND('',#113134,.T.); +#113134 = EDGE_LOOP('',(#113135,#113136,#113137,#113143)); +#113135 = ORIENTED_EDGE('',*,*,#113121,.T.); +#113136 = ORIENTED_EDGE('',*,*,#110395,.F.); +#113137 = ORIENTED_EDGE('',*,*,#113138,.F.); +#113138 = EDGE_CURVE('',#108302,#110388,#113139,.T.); +#113139 = LINE('',#113140,#113141); +#113140 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.075031929731)); +#113141 = VECTOR('',#113142,1.); +#113142 = DIRECTION('',(-1.,0.,0.)); +#113143 = ORIENTED_EDGE('',*,*,#108301,.T.); +#113144 = PLANE('',#113145); +#113145 = AXIS2_PLACEMENT_3D('',#113146,#113147,#113148); +#113146 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-1.075031929731)); +#113147 = DIRECTION('',(-0.,0.322263763377,0.94664991777)); +#113148 = DIRECTION('',(1.,0.,0.)); +#113149 = ADVANCED_FACE('',(#113150),#113161,.T.); +#113150 = FACE_BOUND('',#113151,.T.); +#113151 = EDGE_LOOP('',(#113152,#113153,#113154,#113160)); +#113152 = ORIENTED_EDGE('',*,*,#113138,.T.); +#113153 = ORIENTED_EDGE('',*,*,#110387,.F.); +#113154 = ORIENTED_EDGE('',*,*,#113155,.F.); +#113155 = EDGE_CURVE('',#108310,#110380,#113156,.T.); +#113156 = LINE('',#113157,#113158); +#113157 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.01971278739)); +#113158 = VECTOR('',#113159,1.); +#113159 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#113160 = ORIENTED_EDGE('',*,*,#108309,.T.); +#113161 = PLANE('',#113162); +#113162 = AXIS2_PLACEMENT_3D('',#113163,#113164,#113165); +#113163 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.01971278739)); +#113164 = DIRECTION('',(-0.,0.714511718936,0.699623472665)); +#113165 = DIRECTION('',(1.,0.,0.)); +#113166 = ADVANCED_FACE('',(#113167),#113178,.T.); +#113167 = FACE_BOUND('',#113168,.T.); +#113168 = EDGE_LOOP('',(#113169,#113170,#113171,#113177)); +#113169 = ORIENTED_EDGE('',*,*,#113155,.T.); +#113170 = ORIENTED_EDGE('',*,*,#110379,.F.); +#113171 = ORIENTED_EDGE('',*,*,#113172,.F.); +#113172 = EDGE_CURVE('',#108318,#110372,#113173,.T.); +#113173 = LINE('',#113174,#113175); +#113174 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.909074502706)); +#113175 = VECTOR('',#113176,1.); +#113176 = DIRECTION('',(-1.,0.,0.)); +#113177 = ORIENTED_EDGE('',*,*,#108317,.T.); +#113178 = PLANE('',#113179); +#113179 = AXIS2_PLACEMENT_3D('',#113180,#113181,#113182); +#113180 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.909074502706)); +#113181 = DIRECTION('',(-0.,0.898137765954,0.439714172353)); +#113182 = DIRECTION('',(1.,0.,0.)); +#113183 = ADVANCED_FACE('',(#113184),#113195,.T.); +#113184 = FACE_BOUND('',#113185,.T.); +#113185 = EDGE_LOOP('',(#113186,#113187,#113188,#113194)); +#113186 = ORIENTED_EDGE('',*,*,#113172,.T.); +#113187 = ORIENTED_EDGE('',*,*,#110371,.F.); +#113188 = ORIENTED_EDGE('',*,*,#113189,.F.); +#113189 = EDGE_CURVE('',#108326,#110364,#113190,.T.); +#113190 = LINE('',#113191,#113192); +#113191 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.853755282879)); +#113192 = VECTOR('',#113193,1.); +#113193 = DIRECTION('',(-1.,0.,-4.440892098501E-14)); +#113194 = ORIENTED_EDGE('',*,*,#108325,.T.); +#113195 = PLANE('',#113196); +#113196 = AXIS2_PLACEMENT_3D('',#113197,#113198,#113199); +#113197 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.853755282879)); +#113198 = DIRECTION('',(-0.,1.,0.)); +#113199 = DIRECTION('',(1.,0.,0.)); +#113200 = ADVANCED_FACE('',(#113201),#113212,.T.); +#113201 = FACE_BOUND('',#113202,.T.); +#113202 = EDGE_LOOP('',(#113203,#113204,#113205,#113211)); +#113203 = ORIENTED_EDGE('',*,*,#113189,.T.); +#113204 = ORIENTED_EDGE('',*,*,#110363,.F.); +#113205 = ORIENTED_EDGE('',*,*,#113206,.F.); +#113206 = EDGE_CURVE('',#108334,#110356,#113207,.T.); +#113207 = LINE('',#113208,#113209); +#113208 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-0.770776569367)); +#113209 = VECTOR('',#113210,1.); +#113210 = DIRECTION('',(-1.,0.,-3.330669073876E-14)); +#113211 = ORIENTED_EDGE('',*,*,#108333,.T.); +#113212 = PLANE('',#113213); +#113213 = AXIS2_PLACEMENT_3D('',#113214,#113215,#113216); +#113214 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-0.770776569367)); +#113215 = DIRECTION('',(0.,0.837378643312,-0.546623277701)); +#113216 = DIRECTION('',(-1.,0.,0.)); +#113217 = ADVANCED_FACE('',(#113218),#113229,.T.); +#113218 = FACE_BOUND('',#113219,.T.); +#113219 = EDGE_LOOP('',(#113220,#113221,#113222,#113228)); +#113220 = ORIENTED_EDGE('',*,*,#113206,.T.); +#113221 = ORIENTED_EDGE('',*,*,#110355,.F.); +#113222 = ORIENTED_EDGE('',*,*,#113223,.F.); +#113223 = EDGE_CURVE('',#108342,#110348,#113224,.T.); +#113224 = LINE('',#113225,#113226); +#113225 = CARTESIAN_POINT('',(-6.575,-4.943283230019,-0.715457427025)); +#113226 = VECTOR('',#113227,1.); +#113227 = DIRECTION('',(-1.,0.,0.)); +#113228 = ORIENTED_EDGE('',*,*,#108341,.T.); +#113229 = PLANE('',#113230); +#113230 = AXIS2_PLACEMENT_3D('',#113231,#113232,#113233); +#113231 = CARTESIAN_POINT('',(-6.575,-4.943283230019,-0.715457427025)); +#113232 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#113233 = DIRECTION('',(-1.,0.,0.)); +#113234 = ADVANCED_FACE('',(#113235),#113246,.T.); +#113235 = FACE_BOUND('',#113236,.T.); +#113236 = EDGE_LOOP('',(#113237,#113238,#113239,#113245)); +#113237 = ORIENTED_EDGE('',*,*,#113223,.T.); +#113238 = ORIENTED_EDGE('',*,*,#110347,.F.); +#113239 = ORIENTED_EDGE('',*,*,#113240,.F.); +#113240 = EDGE_CURVE('',#108350,#110340,#113241,.T.); +#113241 = LINE('',#113242,#113243); +#113242 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-0.687797855854)); +#113243 = VECTOR('',#113244,1.); +#113244 = DIRECTION('',(-1.,0.,0.)); +#113245 = ORIENTED_EDGE('',*,*,#108349,.T.); +#113246 = PLANE('',#113247); +#113247 = AXIS2_PLACEMENT_3D('',#113248,#113249,#113250); +#113248 = CARTESIAN_POINT('',(-6.575,-4.807866769981,-0.687797855854)); +#113249 = DIRECTION('',(0.,0.200123648195,-0.979770649404)); +#113250 = DIRECTION('',(-1.,0.,0.)); +#113251 = ADVANCED_FACE('',(#113252),#113263,.T.); +#113252 = FACE_BOUND('',#113253,.T.); +#113253 = EDGE_LOOP('',(#113254,#113255,#113256,#113262)); +#113254 = ORIENTED_EDGE('',*,*,#113240,.T.); +#113255 = ORIENTED_EDGE('',*,*,#110339,.F.); +#113256 = ORIENTED_EDGE('',*,*,#113257,.F.); +#113257 = EDGE_CURVE('',#108358,#110332,#113258,.T.); +#113258 = LINE('',#113259,#113260); +#113259 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-0.687797855854)); +#113260 = VECTOR('',#113261,1.); +#113261 = DIRECTION('',(-1.,0.,0.)); +#113262 = ORIENTED_EDGE('',*,*,#108357,.T.); +#113263 = PLANE('',#113264); +#113264 = AXIS2_PLACEMENT_3D('',#113265,#113266,#113267); +#113265 = CARTESIAN_POINT('',(-6.575,-4.699533230019,-0.687797855854)); +#113266 = DIRECTION('',(0.,0.,-1.)); +#113267 = DIRECTION('',(0.,-1.,0.)); +#113268 = ADVANCED_FACE('',(#113269),#113280,.T.); +#113269 = FACE_BOUND('',#113270,.T.); +#113270 = EDGE_LOOP('',(#113271,#113272,#113273,#113279)); +#113271 = ORIENTED_EDGE('',*,*,#113257,.T.); +#113272 = ORIENTED_EDGE('',*,*,#110331,.F.); +#113273 = ORIENTED_EDGE('',*,*,#113274,.F.); +#113274 = EDGE_CURVE('',#108366,#110324,#113275,.T.); +#113275 = LINE('',#113276,#113277); +#113276 = CARTESIAN_POINT('',(-6.575,-4.564116769981,-0.715457427025)); +#113277 = VECTOR('',#113278,1.); +#113278 = DIRECTION('',(-1.,0.,0.)); +#113279 = ORIENTED_EDGE('',*,*,#108365,.T.); +#113280 = PLANE('',#113281); +#113281 = AXIS2_PLACEMENT_3D('',#113282,#113283,#113284); +#113282 = CARTESIAN_POINT('',(-6.575,-4.564116769981,-0.715457427025)); +#113283 = DIRECTION('',(0.,-0.200123648195,-0.979770649404)); +#113284 = DIRECTION('',(0.,-0.979770649404,0.200123648195)); +#113285 = ADVANCED_FACE('',(#113286),#113297,.T.); +#113286 = FACE_BOUND('',#113287,.T.); +#113287 = EDGE_LOOP('',(#113288,#113289,#113290,#113296)); +#113288 = ORIENTED_EDGE('',*,*,#113274,.T.); +#113289 = ORIENTED_EDGE('',*,*,#110323,.F.); +#113290 = ORIENTED_EDGE('',*,*,#113291,.F.); +#113291 = EDGE_CURVE('',#108374,#110316,#113292,.T.); +#113292 = LINE('',#113293,#113294); +#113293 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-0.770776569367)); +#113294 = VECTOR('',#113295,1.); +#113295 = DIRECTION('',(-1.,0.,-3.330669073876E-14)); +#113296 = ORIENTED_EDGE('',*,*,#108373,.T.); +#113297 = PLANE('',#113298); +#113298 = AXIS2_PLACEMENT_3D('',#113299,#113300,#113301); +#113299 = CARTESIAN_POINT('',(-6.575,-4.482866769981,-0.770776569367)); +#113300 = DIRECTION('',(0.,-0.562790931242,-0.8265992788)); +#113301 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#113302 = ADVANCED_FACE('',(#113303),#113314,.T.); +#113303 = FACE_BOUND('',#113304,.T.); +#113304 = EDGE_LOOP('',(#113305,#113306,#113307,#113313)); +#113305 = ORIENTED_EDGE('',*,*,#113291,.T.); +#113306 = ORIENTED_EDGE('',*,*,#110315,.F.); +#113307 = ORIENTED_EDGE('',*,*,#113308,.F.); +#113308 = EDGE_CURVE('',#108382,#110308,#113309,.T.); +#113309 = LINE('',#113310,#113311); +#113310 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.853755282879)); +#113311 = VECTOR('',#113312,1.); +#113312 = DIRECTION('',(-1.,0.,0.)); +#113313 = ORIENTED_EDGE('',*,*,#108381,.T.); +#113314 = PLANE('',#113315); +#113315 = AXIS2_PLACEMENT_3D('',#113316,#113317,#113318); +#113316 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.853755282879)); +#113317 = DIRECTION('',(0.,-0.837378643312,-0.546623277701)); +#113318 = DIRECTION('',(0.,0.546623277701,-0.837378643312)); +#113319 = ADVANCED_FACE('',(#113320),#113331,.T.); +#113320 = FACE_BOUND('',#113321,.T.); +#113321 = EDGE_LOOP('',(#113322,#113323,#113324,#113330)); +#113322 = ORIENTED_EDGE('',*,*,#113308,.T.); +#113323 = ORIENTED_EDGE('',*,*,#110307,.F.); +#113324 = ORIENTED_EDGE('',*,*,#113325,.F.); +#113325 = EDGE_CURVE('',#108390,#110300,#113326,.T.); +#113326 = LINE('',#113327,#113328); +#113327 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-0.853755282879)); +#113328 = VECTOR('',#113329,1.); +#113329 = DIRECTION('',(-1.,-8.881784197002E-14,0.)); +#113330 = ORIENTED_EDGE('',*,*,#108389,.T.); +#113331 = PLANE('',#113332); +#113332 = AXIS2_PLACEMENT_3D('',#113333,#113334,#113335); +#113333 = CARTESIAN_POINT('',(-6.575,-4.293283230019,-0.853755282879)); +#113334 = DIRECTION('',(0.,0.,-1.)); +#113335 = DIRECTION('',(0.,-1.,0.)); +#113336 = ADVANCED_FACE('',(#113337),#113348,.T.); +#113337 = FACE_BOUND('',#113338,.T.); +#113338 = EDGE_LOOP('',(#113339,#113340,#113341,#113347)); +#113339 = ORIENTED_EDGE('',*,*,#113325,.T.); +#113340 = ORIENTED_EDGE('',*,*,#110299,.F.); +#113341 = ORIENTED_EDGE('',*,*,#113342,.F.); +#113342 = EDGE_CURVE('',#108398,#110292,#113343,.T.); +#113343 = LINE('',#113344,#113345); +#113344 = CARTESIAN_POINT('',(-6.575,-4.320366769981,-0.743116998196)); +#113345 = VECTOR('',#113346,1.); +#113346 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#113347 = ORIENTED_EDGE('',*,*,#108397,.T.); +#113348 = PLANE('',#113349); +#113349 = AXIS2_PLACEMENT_3D('',#113350,#113351,#113352); +#113350 = CARTESIAN_POINT('',(-6.575,-4.320366769981,-0.743116998196)); +#113351 = DIRECTION('',(-0.,0.971320734904,0.23777306396)); +#113352 = DIRECTION('',(1.,0.,0.)); +#113353 = ADVANCED_FACE('',(#113354),#113365,.T.); +#113354 = FACE_BOUND('',#113355,.T.); +#113355 = EDGE_LOOP('',(#113356,#113357,#113358,#113364)); +#113356 = ORIENTED_EDGE('',*,*,#113342,.T.); +#113357 = ORIENTED_EDGE('',*,*,#110291,.F.); +#113358 = ORIENTED_EDGE('',*,*,#113359,.F.); +#113359 = EDGE_CURVE('',#108406,#110284,#113360,.T.); +#113360 = LINE('',#113361,#113362); +#113361 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.632478713512)); +#113362 = VECTOR('',#113363,1.); +#113363 = DIRECTION('',(-1.,0.,3.330669073876E-14)); +#113364 = ORIENTED_EDGE('',*,*,#108405,.T.); +#113365 = PLANE('',#113366); +#113366 = AXIS2_PLACEMENT_3D('',#113367,#113368,#113369); +#113367 = CARTESIAN_POINT('',(-6.575,-4.4287,-0.632478713512)); +#113368 = DIRECTION('',(-0.,0.714510718335,0.699624494557)); +#113369 = DIRECTION('',(1.,0.,0.)); +#113370 = ADVANCED_FACE('',(#113371),#113382,.T.); +#113371 = FACE_BOUND('',#113372,.T.); +#113372 = EDGE_LOOP('',(#113373,#113374,#113375,#113381)); +#113373 = ORIENTED_EDGE('',*,*,#113359,.T.); +#113374 = ORIENTED_EDGE('',*,*,#110283,.F.); +#113375 = ORIENTED_EDGE('',*,*,#113376,.F.); +#113376 = EDGE_CURVE('',#108414,#110276,#113377,.T.); +#113377 = LINE('',#113378,#113379); +#113378 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-0.577159571171)); +#113379 = VECTOR('',#113380,1.); +#113380 = DIRECTION('',(-1.,0.,0.)); +#113381 = ORIENTED_EDGE('',*,*,#108413,.T.); +#113382 = PLANE('',#113383); +#113383 = AXIS2_PLACEMENT_3D('',#113384,#113385,#113386); +#113384 = CARTESIAN_POINT('',(-6.575,-4.537033230019,-0.577159571171)); +#113385 = DIRECTION('',(-0.,0.454777457556,0.890605111202)); +#113386 = DIRECTION('',(1.,0.,0.)); +#113387 = ADVANCED_FACE('',(#113388),#113399,.T.); +#113388 = FACE_BOUND('',#113389,.T.); +#113389 = EDGE_LOOP('',(#113390,#113391,#113392,#113398)); +#113390 = ORIENTED_EDGE('',*,*,#113376,.T.); +#113391 = ORIENTED_EDGE('',*,*,#110275,.F.); +#113392 = ORIENTED_EDGE('',*,*,#113393,.F.); +#113393 = EDGE_CURVE('',#108422,#110268,#113394,.T.); +#113394 = LINE('',#113395,#113396); +#113395 = CARTESIAN_POINT('',(-6.575,-4.726616769981,-0.5495)); +#113396 = VECTOR('',#113397,1.); +#113397 = DIRECTION('',(-1.,0.,0.)); +#113398 = ORIENTED_EDGE('',*,*,#108421,.T.); +#113399 = PLANE('',#113400); +#113400 = AXIS2_PLACEMENT_3D('',#113401,#113402,#113403); +#113401 = CARTESIAN_POINT('',(-6.575,-4.726616769981,-0.5495)); +#113402 = DIRECTION('',(-0.,0.144368076845,0.989524056498)); +#113403 = DIRECTION('',(1.,0.,0.)); +#113404 = ADVANCED_FACE('',(#113405),#113416,.T.); +#113405 = FACE_BOUND('',#113406,.T.); +#113406 = EDGE_LOOP('',(#113407,#113408,#113409,#113415)); +#113407 = ORIENTED_EDGE('',*,*,#113393,.T.); +#113408 = ORIENTED_EDGE('',*,*,#110267,.F.); +#113409 = ORIENTED_EDGE('',*,*,#113410,.F.); +#113410 = EDGE_CURVE('',#108430,#110260,#113411,.T.); +#113411 = LINE('',#113412,#113413); +#113412 = CARTESIAN_POINT('',(-6.575,-4.780783230019,-0.5495)); +#113413 = VECTOR('',#113414,1.); +#113414 = DIRECTION('',(-1.,0.,0.)); +#113415 = ORIENTED_EDGE('',*,*,#108429,.T.); +#113416 = PLANE('',#113417); +#113417 = AXIS2_PLACEMENT_3D('',#113418,#113419,#113420); +#113418 = CARTESIAN_POINT('',(-6.575,-4.780783230019,-0.5495)); +#113419 = DIRECTION('',(0.,0.,1.)); +#113420 = DIRECTION('',(1.,0.,-0.)); +#113421 = ADVANCED_FACE('',(#113422),#113433,.T.); +#113422 = FACE_BOUND('',#113423,.T.); +#113423 = EDGE_LOOP('',(#113424,#113425,#113426,#113432)); +#113424 = ORIENTED_EDGE('',*,*,#113410,.T.); +#113425 = ORIENTED_EDGE('',*,*,#110259,.F.); +#113426 = ORIENTED_EDGE('',*,*,#113427,.F.); +#113427 = EDGE_CURVE('',#108438,#110252,#113428,.T.); +#113428 = LINE('',#113429,#113430); +#113429 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-0.577159571171)); +#113430 = VECTOR('',#113431,1.); +#113431 = DIRECTION('',(-1.,0.,0.)); +#113432 = ORIENTED_EDGE('',*,*,#108437,.T.); +#113433 = PLANE('',#113434); +#113434 = AXIS2_PLACEMENT_3D('',#113435,#113436,#113437); +#113435 = CARTESIAN_POINT('',(-6.575,-4.970366769981,-0.577159571171)); +#113436 = DIRECTION('',(0.,-0.144368076845,0.989524056498)); +#113437 = DIRECTION('',(-1.,0.,0.)); +#113438 = ADVANCED_FACE('',(#113439),#113450,.T.); +#113439 = FACE_BOUND('',#113440,.T.); +#113440 = EDGE_LOOP('',(#113441,#113442,#113443,#113449)); +#113441 = ORIENTED_EDGE('',*,*,#113427,.T.); +#113442 = ORIENTED_EDGE('',*,*,#110251,.F.); +#113443 = ORIENTED_EDGE('',*,*,#113444,.F.); +#113444 = EDGE_CURVE('',#108446,#110244,#113445,.T.); +#113445 = LINE('',#113446,#113447); +#113446 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.632478713512)); +#113447 = VECTOR('',#113448,1.); +#113448 = DIRECTION('',(-1.,0.,0.)); +#113449 = ORIENTED_EDGE('',*,*,#108445,.T.); +#113450 = PLANE('',#113451); +#113451 = AXIS2_PLACEMENT_3D('',#113452,#113453,#113454); +#113452 = CARTESIAN_POINT('',(-6.575,-5.0787,-0.632478713512)); +#113453 = DIRECTION('',(0.,-0.454777457556,0.890605111202)); +#113454 = DIRECTION('',(-1.,0.,0.)); +#113455 = ADVANCED_FACE('',(#113456),#113467,.T.); +#113456 = FACE_BOUND('',#113457,.T.); +#113457 = EDGE_LOOP('',(#113458,#113459,#113460,#113466)); +#113458 = ORIENTED_EDGE('',*,*,#113444,.T.); +#113459 = ORIENTED_EDGE('',*,*,#110243,.F.); +#113460 = ORIENTED_EDGE('',*,*,#113461,.F.); +#113461 = EDGE_CURVE('',#108454,#110236,#113462,.T.); +#113462 = LINE('',#113463,#113464); +#113463 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-0.743116998196)); +#113464 = VECTOR('',#113465,1.); +#113465 = DIRECTION('',(-1.,0.,-1.110223024625E-13)); +#113466 = ORIENTED_EDGE('',*,*,#108453,.T.); +#113467 = PLANE('',#113468); +#113468 = AXIS2_PLACEMENT_3D('',#113469,#113470,#113471); +#113469 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-0.743116998196)); +#113470 = DIRECTION('',(0.,-0.714510718335,0.699624494557)); +#113471 = DIRECTION('',(-1.,0.,0.)); +#113472 = ADVANCED_FACE('',(#113473),#113484,.T.); +#113473 = FACE_BOUND('',#113474,.T.); +#113474 = EDGE_LOOP('',(#113475,#113476,#113477,#113483)); +#113475 = ORIENTED_EDGE('',*,*,#113461,.T.); +#113476 = ORIENTED_EDGE('',*,*,#110235,.F.); +#113477 = ORIENTED_EDGE('',*,*,#113478,.F.); +#113478 = EDGE_CURVE('',#108462,#110228,#113479,.T.); +#113479 = LINE('',#113480,#113481); +#113480 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.853755282879)); +#113481 = VECTOR('',#113482,1.); +#113482 = DIRECTION('',(-1.,0.,-1.998401444326E-13)); +#113483 = ORIENTED_EDGE('',*,*,#108461,.T.); +#113484 = PLANE('',#113485); +#113485 = AXIS2_PLACEMENT_3D('',#113486,#113487,#113488); +#113486 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.853755282879)); +#113487 = DIRECTION('',(0.,-0.971320734904,0.23777306396)); +#113488 = DIRECTION('',(-1.,0.,0.)); +#113489 = ADVANCED_FACE('',(#113490),#113501,.T.); +#113490 = FACE_BOUND('',#113491,.T.); +#113491 = EDGE_LOOP('',(#113492,#113493,#113494,#113500)); +#113492 = ORIENTED_EDGE('',*,*,#113478,.T.); +#113493 = ORIENTED_EDGE('',*,*,#110227,.F.); +#113494 = ORIENTED_EDGE('',*,*,#113495,.F.); +#113495 = EDGE_CURVE('',#108470,#110220,#113496,.T.); +#113496 = LINE('',#113497,#113498); +#113497 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.909074502706)); +#113498 = VECTOR('',#113499,1.); +#113499 = DIRECTION('',(-1.,0.,2.220446049251E-13)); +#113500 = ORIENTED_EDGE('',*,*,#108469,.T.); +#113501 = PLANE('',#113502); +#113502 = AXIS2_PLACEMENT_3D('',#113503,#113504,#113505); +#113503 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-0.909074502706)); +#113504 = DIRECTION('',(0.,-1.,0.)); +#113505 = DIRECTION('',(0.,0.,-1.)); +#113506 = ADVANCED_FACE('',(#113507),#113518,.T.); +#113507 = FACE_BOUND('',#113508,.T.); +#113508 = EDGE_LOOP('',(#113509,#113510,#113511,#113517)); +#113509 = ORIENTED_EDGE('',*,*,#113495,.T.); +#113510 = ORIENTED_EDGE('',*,*,#110219,.F.); +#113511 = ORIENTED_EDGE('',*,*,#113512,.F.); +#113512 = EDGE_CURVE('',#108478,#110212,#113513,.T.); +#113513 = LINE('',#113514,#113515); +#113514 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-1.01971278739)); +#113515 = VECTOR('',#113516,1.); +#113516 = DIRECTION('',(-1.,0.,0.)); +#113517 = ORIENTED_EDGE('',*,*,#108477,.T.); +#113518 = PLANE('',#113519); +#113519 = AXIS2_PLACEMENT_3D('',#113520,#113521,#113522); +#113520 = CARTESIAN_POINT('',(-6.575,-5.187033230019,-1.01971278739)); +#113521 = DIRECTION('',(0.,-0.971320734904,-0.23777306396)); +#113522 = DIRECTION('',(0.,0.23777306396,-0.971320734904)); +#113523 = ADVANCED_FACE('',(#113524),#113535,.T.); +#113524 = FACE_BOUND('',#113525,.T.); +#113525 = EDGE_LOOP('',(#113526,#113527,#113528,#113534)); +#113526 = ORIENTED_EDGE('',*,*,#113512,.T.); +#113527 = ORIENTED_EDGE('',*,*,#110211,.F.); +#113528 = ORIENTED_EDGE('',*,*,#113529,.F.); +#113529 = EDGE_CURVE('',#108486,#110204,#113530,.T.); +#113530 = LINE('',#113531,#113532); +#113531 = CARTESIAN_POINT('',(-6.575,-5.132866769981,-1.102691500902)); +#113532 = VECTOR('',#113533,1.); +#113533 = DIRECTION('',(-1.,0.,-4.440892098501E-14)); +#113534 = ORIENTED_EDGE('',*,*,#108485,.T.); +#113535 = PLANE('',#113536); +#113536 = AXIS2_PLACEMENT_3D('',#113537,#113538,#113539); +#113537 = CARTESIAN_POINT('',(-6.575,-5.132866769981,-1.102691500902)); +#113538 = DIRECTION('',(0.,-0.837380075,-0.546621084475)); +#113539 = DIRECTION('',(0.,0.546621084475,-0.837380075)); +#113540 = ADVANCED_FACE('',(#113541),#113552,.T.); +#113541 = FACE_BOUND('',#113542,.T.); +#113542 = EDGE_LOOP('',(#113543,#113544,#113545,#113551)); +#113543 = ORIENTED_EDGE('',*,*,#113529,.T.); +#113544 = ORIENTED_EDGE('',*,*,#110203,.F.); +#113545 = ORIENTED_EDGE('',*,*,#113546,.F.); +#113546 = EDGE_CURVE('',#108494,#110196,#113547,.T.); +#113547 = LINE('',#113548,#113549); +#113548 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.185670214415)); +#113549 = VECTOR('',#113550,1.); +#113550 = DIRECTION('',(-1.,-8.881784197002E-14,0.)); +#113551 = ORIENTED_EDGE('',*,*,#108493,.T.); +#113552 = PLANE('',#113553); +#113553 = AXIS2_PLACEMENT_3D('',#113554,#113555,#113556); +#113554 = CARTESIAN_POINT('',(-6.575,-5.024533230019,-1.185670214415)); +#113555 = DIRECTION('',(0.,-0.608076101139,-0.793878740881)); +#113556 = DIRECTION('',(0.,-0.793878740881,0.608076101139)); +#113557 = ADVANCED_FACE('',(#113558),#113569,.T.); +#113558 = FACE_BOUND('',#113559,.T.); +#113559 = EDGE_LOOP('',(#113560,#113561,#113562,#113568)); +#113560 = ORIENTED_EDGE('',*,*,#113546,.T.); +#113561 = ORIENTED_EDGE('',*,*,#110195,.F.); +#113562 = ORIENTED_EDGE('',*,*,#113563,.F.); +#113563 = EDGE_CURVE('',#108502,#110188,#113564,.T.); +#113564 = LINE('',#113565,#113566); +#113565 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.240989356756)); +#113566 = VECTOR('',#113567,1.); +#113567 = DIRECTION('',(-1.,0.,0.)); +#113568 = ORIENTED_EDGE('',*,*,#108501,.T.); +#113569 = PLANE('',#113570); +#113570 = AXIS2_PLACEMENT_3D('',#113571,#113572,#113573); +#113571 = CARTESIAN_POINT('',(-6.575,-5.15995,-1.240989356756)); +#113572 = DIRECTION('',(0.,-0.378172347215,0.925735208255)); +#113573 = DIRECTION('',(-1.,0.,0.)); +#113574 = ADVANCED_FACE('',(#113575),#113586,.T.); +#113575 = FACE_BOUND('',#113576,.T.); +#113576 = EDGE_LOOP('',(#113577,#113578,#113579,#113585)); +#113577 = ORIENTED_EDGE('',*,*,#113563,.T.); +#113578 = ORIENTED_EDGE('',*,*,#110187,.F.); +#113579 = ORIENTED_EDGE('',*,*,#113580,.F.); +#113580 = EDGE_CURVE('',#108510,#110180,#113581,.T.); +#113581 = LINE('',#113582,#113583); +#113582 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.323968070269)); +#113583 = VECTOR('',#113584,1.); +#113584 = DIRECTION('',(-1.,0.,-1.110223024625E-13)); +#113585 = ORIENTED_EDGE('',*,*,#108509,.T.); +#113586 = PLANE('',#113587); +#113587 = AXIS2_PLACEMENT_3D('',#113588,#113589,#113590); +#113588 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.323968070269)); +#113589 = DIRECTION('',(0.,-0.837378643312,0.546623277701)); +#113590 = DIRECTION('',(-1.,0.,0.)); +#113591 = ADVANCED_FACE('',(#113592),#113603,.T.); +#113592 = FACE_BOUND('',#113593,.T.); +#113593 = EDGE_LOOP('',(#113594,#113595,#113596,#113602)); +#113594 = ORIENTED_EDGE('',*,*,#113580,.T.); +#113595 = ORIENTED_EDGE('',*,*,#110179,.F.); +#113596 = ORIENTED_EDGE('',*,*,#113597,.F.); +#113597 = EDGE_CURVE('',#108518,#110172,#113598,.T.); +#113598 = LINE('',#113599,#113600); +#113599 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.434606393695)); +#113600 = VECTOR('',#113601,1.); +#113601 = DIRECTION('',(-1.,0.,0.)); +#113602 = ORIENTED_EDGE('',*,*,#108517,.T.); +#113603 = PLANE('',#113604); +#113604 = AXIS2_PLACEMENT_3D('',#113605,#113606,#113607); +#113605 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.434606393695)); +#113606 = DIRECTION('',(0.,-0.971321382574,0.237770418166)); +#113607 = DIRECTION('',(-1.,0.,0.)); +#113608 = ADVANCED_FACE('',(#113609),#113620,.T.); +#113609 = FACE_BOUND('',#113610,.T.); +#113610 = EDGE_LOOP('',(#113611,#113612,#113613,#113619)); +#113611 = ORIENTED_EDGE('',*,*,#113597,.T.); +#113612 = ORIENTED_EDGE('',*,*,#110171,.F.); +#113613 = ORIENTED_EDGE('',*,*,#113614,.F.); +#113614 = EDGE_CURVE('',#108526,#110164,#113615,.T.); +#113615 = LINE('',#113616,#113617); +#113616 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.545244678378)); +#113617 = VECTOR('',#113618,1.); +#113618 = DIRECTION('',(-1.,0.,0.)); +#113619 = ORIENTED_EDGE('',*,*,#108525,.T.); +#113620 = PLANE('',#113621); +#113621 = AXIS2_PLACEMENT_3D('',#113622,#113623,#113624); +#113622 = CARTESIAN_POINT('',(-6.575,-5.2412,-1.545244678378)); +#113623 = DIRECTION('',(0.,-1.,0.)); +#113624 = DIRECTION('',(0.,0.,-1.)); +#113625 = ADVANCED_FACE('',(#113626),#113632,.T.); +#113626 = FACE_BOUND('',#113627,.T.); +#113627 = EDGE_LOOP('',(#113628,#113629,#113630,#113631)); +#113628 = ORIENTED_EDGE('',*,*,#113614,.T.); +#113629 = ORIENTED_EDGE('',*,*,#110161,.F.); +#113630 = ORIENTED_EDGE('',*,*,#112672,.F.); +#113631 = ORIENTED_EDGE('',*,*,#108533,.T.); +#113632 = PLANE('',#113633); +#113633 = AXIS2_PLACEMENT_3D('',#113634,#113635,#113636); +#113634 = CARTESIAN_POINT('',(-6.575,-5.214116769981,-1.628223411262)); +#113635 = DIRECTION('',(0.,-0.950645562605,-0.310278929834)); +#113636 = DIRECTION('',(0.,0.310278929834,-0.950645562605)); +#113637 = ADVANCED_FACE('',(#113638),#113654,.T.); +#113638 = FACE_BOUND('',#113639,.T.); +#113639 = EDGE_LOOP('',(#113640,#113646,#113647,#113653)); +#113640 = ORIENTED_EDGE('',*,*,#113641,.T.); +#113641 = EDGE_CURVE('',#108840,#110626,#113642,.T.); +#113642 = LINE('',#113643,#113644); +#113643 = CARTESIAN_POINT('',(-6.575,3.390572087667,-1.580080685205)); +#113644 = VECTOR('',#113645,1.); +#113645 = DIRECTION('',(-1.,0.,0.)); +#113646 = ORIENTED_EDGE('',*,*,#110923,.F.); +#113647 = ORIENTED_EDGE('',*,*,#113648,.F.); +#113648 = EDGE_CURVE('',#108552,#110916,#113649,.T.); +#113649 = LINE('',#113650,#113651); +#113650 = CARTESIAN_POINT('',(-6.575,3.288647333187,-1.507602375245)); +#113651 = VECTOR('',#113652,1.); +#113652 = DIRECTION('',(-1.,0.,0.)); +#113653 = ORIENTED_EDGE('',*,*,#108847,.T.); +#113654 = PLANE('',#113655); +#113655 = AXIS2_PLACEMENT_3D('',#113656,#113657,#113658); +#113656 = CARTESIAN_POINT('',(-6.575,3.288647333187,-1.507602375245)); +#113657 = DIRECTION('',(-0.,0.579515738741,0.81496104726)); +#113658 = DIRECTION('',(1.,0.,0.)); +#113659 = ADVANCED_FACE('',(#113660),#113671,.T.); +#113660 = FACE_BOUND('',#113661,.T.); +#113661 = EDGE_LOOP('',(#113662,#113663,#113664,#113670)); +#113662 = ORIENTED_EDGE('',*,*,#113648,.T.); +#113663 = ORIENTED_EDGE('',*,*,#110915,.F.); +#113664 = ORIENTED_EDGE('',*,*,#113665,.F.); +#113665 = EDGE_CURVE('',#108550,#110908,#113666,.T.); +#113666 = LINE('',#113667,#113668); +#113667 = CARTESIAN_POINT('',(-6.575,3.318537683111,-1.426570752661)); +#113668 = VECTOR('',#113669,1.); +#113669 = DIRECTION('',(-1.,0.,0.)); +#113670 = ORIENTED_EDGE('',*,*,#108549,.T.); +#113671 = PLANE('',#113672); +#113672 = AXIS2_PLACEMENT_3D('',#113673,#113674,#113675); +#113673 = CARTESIAN_POINT('',(-6.575,3.318537683111,-1.426570752661)); +#113674 = DIRECTION('',(0.,0.93820559924,-0.346078392209)); +#113675 = DIRECTION('',(-1.,0.,0.)); +#113676 = ADVANCED_FACE('',(#113677),#113688,.T.); +#113677 = FACE_BOUND('',#113678,.T.); +#113678 = EDGE_LOOP('',(#113679,#113680,#113681,#113687)); +#113679 = ORIENTED_EDGE('',*,*,#113665,.T.); +#113680 = ORIENTED_EDGE('',*,*,#110907,.F.); +#113681 = ORIENTED_EDGE('',*,*,#113682,.F.); +#113682 = EDGE_CURVE('',#108560,#110900,#113683,.T.); +#113683 = LINE('',#113684,#113685); +#113684 = CARTESIAN_POINT('',(-6.575,3.33670857148,-1.362777065421)); +#113685 = VECTOR('',#113686,1.); +#113686 = DIRECTION('',(-1.,0.,0.)); +#113687 = ORIENTED_EDGE('',*,*,#108559,.T.); +#113688 = PLANE('',#113689); +#113689 = AXIS2_PLACEMENT_3D('',#113690,#113691,#113692); +#113690 = CARTESIAN_POINT('',(-6.575,3.33670857148,-1.362777065421)); +#113691 = DIRECTION('',(0.,0.961746161273,-0.27394218601)); +#113692 = DIRECTION('',(-1.,0.,0.)); +#113693 = ADVANCED_FACE('',(#113694),#113705,.T.); +#113694 = FACE_BOUND('',#113695,.T.); +#113695 = EDGE_LOOP('',(#113696,#113697,#113698,#113704)); +#113696 = ORIENTED_EDGE('',*,*,#113682,.T.); +#113697 = ORIENTED_EDGE('',*,*,#110899,.F.); +#113698 = ORIENTED_EDGE('',*,*,#113699,.F.); +#113699 = EDGE_CURVE('',#108568,#110892,#113700,.T.); +#113700 = LINE('',#113701,#113702); +#113701 = CARTESIAN_POINT('',(-6.575,3.328806560274,-1.318800524007)); +#113702 = VECTOR('',#113703,1.); +#113703 = DIRECTION('',(-1.,0.,-2.220446049251E-14)); +#113704 = ORIENTED_EDGE('',*,*,#108567,.T.); +#113705 = PLANE('',#113706); +#113706 = AXIS2_PLACEMENT_3D('',#113707,#113708,#113709); +#113707 = CARTESIAN_POINT('',(-6.575,3.328806560274,-1.318800524007)); +#113708 = DIRECTION('',(-0.,0.98423699659,0.176854557597)); +#113709 = DIRECTION('',(1.,0.,0.)); +#113710 = ADVANCED_FACE('',(#113711),#113722,.T.); +#113711 = FACE_BOUND('',#113712,.T.); +#113712 = EDGE_LOOP('',(#113713,#113714,#113715,#113721)); +#113713 = ORIENTED_EDGE('',*,*,#113699,.T.); +#113714 = ORIENTED_EDGE('',*,*,#110891,.F.); +#113715 = ORIENTED_EDGE('',*,*,#113716,.F.); +#113716 = EDGE_CURVE('',#108576,#110884,#113717,.T.); +#113717 = LINE('',#113718,#113719); +#113718 = CARTESIAN_POINT('',(-6.575,3.306551091157,-1.277403111866)); +#113719 = VECTOR('',#113720,1.); +#113720 = DIRECTION('',(-1.,0.,0.)); +#113721 = ORIENTED_EDGE('',*,*,#108575,.T.); +#113722 = PLANE('',#113723); +#113723 = AXIS2_PLACEMENT_3D('',#113724,#113725,#113726); +#113724 = CARTESIAN_POINT('',(-6.575,3.306551091157,-1.277403111866)); +#113725 = DIRECTION('',(-0.,0.880785708435,0.4735150851)); +#113726 = DIRECTION('',(1.,0.,0.)); +#113727 = ADVANCED_FACE('',(#113728),#113739,.T.); +#113728 = FACE_BOUND('',#113729,.T.); +#113729 = EDGE_LOOP('',(#113730,#113731,#113732,#113738)); +#113730 = ORIENTED_EDGE('',*,*,#113716,.T.); +#113731 = ORIENTED_EDGE('',*,*,#110883,.F.); +#113732 = ORIENTED_EDGE('',*,*,#113733,.F.); +#113733 = EDGE_CURVE('',#108584,#110876,#113734,.T.); +#113734 = LINE('',#113735,#113736); +#113735 = CARTESIAN_POINT('',(-6.575,3.269942164128,-1.238584828997)); +#113736 = VECTOR('',#113737,1.); +#113737 = DIRECTION('',(-1.,0.,0.)); +#113738 = ORIENTED_EDGE('',*,*,#108583,.T.); +#113739 = PLANE('',#113740); +#113740 = AXIS2_PLACEMENT_3D('',#113741,#113742,#113743); +#113741 = CARTESIAN_POINT('',(-6.575,3.269942164128,-1.238584828997)); +#113742 = DIRECTION('',(-0.,0.727506784515,0.686100487162)); +#113743 = DIRECTION('',(1.,0.,0.)); +#113744 = ADVANCED_FACE('',(#113745),#113756,.T.); +#113745 = FACE_BOUND('',#113746,.T.); +#113746 = EDGE_LOOP('',(#113747,#113748,#113749,#113755)); +#113747 = ORIENTED_EDGE('',*,*,#113733,.T.); +#113748 = ORIENTED_EDGE('',*,*,#110875,.F.); +#113749 = ORIENTED_EDGE('',*,*,#113750,.F.); +#113750 = EDGE_CURVE('',#108592,#110868,#113751,.T.); +#113751 = LINE('',#113752,#113753); +#113752 = CARTESIAN_POINT('',(-6.575,3.238601254837,-1.229084238559)); +#113753 = VECTOR('',#113754,1.); +#113754 = DIRECTION('',(-1.,0.,0.)); +#113755 = ORIENTED_EDGE('',*,*,#108591,.T.); +#113756 = PLANE('',#113757); +#113757 = AXIS2_PLACEMENT_3D('',#113758,#113759,#113760); +#113758 = CARTESIAN_POINT('',(-6.575,3.238601254837,-1.229084238559)); +#113759 = DIRECTION('',(-0.,0.290100948767,0.9569960499)); +#113760 = DIRECTION('',(1.,0.,0.)); +#113761 = ADVANCED_FACE('',(#113762),#113773,.T.); +#113762 = FACE_BOUND('',#113763,.T.); +#113763 = EDGE_LOOP('',(#113764,#113765,#113766,#113772)); +#113764 = ORIENTED_EDGE('',*,*,#113750,.T.); +#113765 = ORIENTED_EDGE('',*,*,#110867,.F.); +#113766 = ORIENTED_EDGE('',*,*,#113767,.F.); +#113767 = EDGE_CURVE('',#108600,#110860,#113768,.T.); +#113768 = LINE('',#113769,#113770); +#113769 = CARTESIAN_POINT('',(-6.575,3.192906872234,-1.222162780161)); +#113770 = VECTOR('',#113771,1.); +#113771 = DIRECTION('',(-1.,0.,0.)); +#113772 = ORIENTED_EDGE('',*,*,#108599,.T.); +#113773 = PLANE('',#113774); +#113774 = AXIS2_PLACEMENT_3D('',#113775,#113776,#113777); +#113775 = CARTESIAN_POINT('',(-6.575,3.192906872234,-1.222162780161)); +#113776 = DIRECTION('',(-0.,0.149764494255,0.988721698083)); +#113777 = DIRECTION('',(1.,0.,0.)); +#113778 = ADVANCED_FACE('',(#113779),#113790,.T.); +#113779 = FACE_BOUND('',#113780,.T.); +#113780 = EDGE_LOOP('',(#113781,#113782,#113783,#113789)); +#113781 = ORIENTED_EDGE('',*,*,#113767,.T.); +#113782 = ORIENTED_EDGE('',*,*,#110859,.F.); +#113783 = ORIENTED_EDGE('',*,*,#113784,.F.); +#113784 = EDGE_CURVE('',#108608,#110852,#113785,.T.); +#113785 = LINE('',#113786,#113787); +#113786 = CARTESIAN_POINT('',(-6.575,3.164199966678,-1.227321036861)); +#113787 = VECTOR('',#113788,1.); +#113788 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#113789 = ORIENTED_EDGE('',*,*,#108607,.T.); +#113790 = PLANE('',#113791); +#113791 = AXIS2_PLACEMENT_3D('',#113792,#113793,#113794); +#113792 = CARTESIAN_POINT('',(-6.575,3.164199966678,-1.227321036861)); +#113793 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#113794 = DIRECTION('',(-1.,0.,0.)); +#113795 = ADVANCED_FACE('',(#113796),#113807,.T.); +#113796 = FACE_BOUND('',#113797,.T.); +#113797 = EDGE_LOOP('',(#113798,#113799,#113800,#113806)); +#113798 = ORIENTED_EDGE('',*,*,#113784,.T.); +#113799 = ORIENTED_EDGE('',*,*,#110851,.F.); +#113800 = ORIENTED_EDGE('',*,*,#113801,.F.); +#113801 = EDGE_CURVE('',#108616,#110844,#113802,.T.); +#113802 = LINE('',#113803,#113804); +#113803 = CARTESIAN_POINT('',(-6.575,3.123773601812,-1.249717270894)); +#113804 = VECTOR('',#113805,1.); +#113805 = DIRECTION('',(-1.,0.,0.)); +#113806 = ORIENTED_EDGE('',*,*,#108615,.T.); +#113807 = PLANE('',#113808); +#113808 = AXIS2_PLACEMENT_3D('',#113809,#113810,#113811); +#113809 = CARTESIAN_POINT('',(-6.575,3.123773601812,-1.249717270894)); +#113810 = DIRECTION('',(0.,-0.484603270983,0.874734056587)); +#113811 = DIRECTION('',(-1.,0.,0.)); +#113812 = ADVANCED_FACE('',(#113813),#113824,.T.); +#113813 = FACE_BOUND('',#113814,.T.); +#113814 = EDGE_LOOP('',(#113815,#113816,#113817,#113823)); +#113815 = ORIENTED_EDGE('',*,*,#113801,.T.); +#113816 = ORIENTED_EDGE('',*,*,#110843,.F.); +#113817 = ORIENTED_EDGE('',*,*,#113818,.F.); +#113818 = EDGE_CURVE('',#108624,#110836,#113819,.T.); +#113819 = LINE('',#113820,#113821); +#113820 = CARTESIAN_POINT('',(-6.575,3.097700699991,-1.269534374732)); +#113821 = VECTOR('',#113822,1.); +#113822 = DIRECTION('',(-1.,0.,0.)); +#113823 = ORIENTED_EDGE('',*,*,#108623,.T.); +#113824 = PLANE('',#113825); +#113825 = AXIS2_PLACEMENT_3D('',#113826,#113827,#113828); +#113826 = CARTESIAN_POINT('',(-6.575,3.097700699991,-1.269534374732)); +#113827 = DIRECTION('',(0.,-0.605116141238,0.796137209037)); +#113828 = DIRECTION('',(-1.,0.,0.)); +#113829 = ADVANCED_FACE('',(#113830),#113841,.T.); +#113830 = FACE_BOUND('',#113831,.T.); +#113831 = EDGE_LOOP('',(#113832,#113833,#113834,#113840)); +#113832 = ORIENTED_EDGE('',*,*,#113818,.T.); +#113833 = ORIENTED_EDGE('',*,*,#110835,.F.); +#113834 = ORIENTED_EDGE('',*,*,#113835,.F.); +#113835 = EDGE_CURVE('',#108632,#110828,#113836,.T.); +#113836 = LINE('',#113837,#113838); +#113837 = CARTESIAN_POINT('',(-6.575,3.076895785108,-1.318669176535)); +#113838 = VECTOR('',#113839,1.); +#113839 = DIRECTION('',(-1.,0.,0.)); +#113840 = ORIENTED_EDGE('',*,*,#108631,.T.); +#113841 = PLANE('',#113842); +#113842 = AXIS2_PLACEMENT_3D('',#113843,#113844,#113845); +#113843 = CARTESIAN_POINT('',(-6.575,3.076895785108,-1.318669176535)); +#113844 = DIRECTION('',(0.,-0.920852114162,0.389912020644)); +#113845 = DIRECTION('',(-1.,0.,0.)); +#113846 = ADVANCED_FACE('',(#113847),#113858,.T.); +#113847 = FACE_BOUND('',#113848,.T.); +#113848 = EDGE_LOOP('',(#113849,#113850,#113851,#113857)); +#113849 = ORIENTED_EDGE('',*,*,#113835,.T.); +#113850 = ORIENTED_EDGE('',*,*,#110827,.F.); +#113851 = ORIENTED_EDGE('',*,*,#113852,.F.); +#113852 = EDGE_CURVE('',#108640,#110820,#113853,.T.); +#113853 = LINE('',#113854,#113855); +#113854 = CARTESIAN_POINT('',(-6.575,3.070444353802,-1.365224844454)); +#113855 = VECTOR('',#113856,1.); +#113856 = DIRECTION('',(-1.,0.,0.)); +#113857 = ORIENTED_EDGE('',*,*,#108639,.T.); +#113858 = PLANE('',#113859); +#113859 = AXIS2_PLACEMENT_3D('',#113860,#113861,#113862); +#113860 = CARTESIAN_POINT('',(-6.575,3.070444353802,-1.365224844454)); +#113861 = DIRECTION('',(0.,-0.99053465094,0.137262905725)); +#113862 = DIRECTION('',(-1.,0.,0.)); +#113863 = ADVANCED_FACE('',(#113864),#113875,.T.); +#113864 = FACE_BOUND('',#113865,.T.); +#113865 = EDGE_LOOP('',(#113866,#113867,#113868,#113874)); +#113866 = ORIENTED_EDGE('',*,*,#113852,.T.); +#113867 = ORIENTED_EDGE('',*,*,#110819,.F.); +#113868 = ORIENTED_EDGE('',*,*,#113869,.F.); +#113869 = EDGE_CURVE('',#108648,#110812,#113870,.T.); +#113870 = LINE('',#113871,#113872); +#113871 = CARTESIAN_POINT('',(-6.575,3.078346365008,-1.409201385868)); +#113872 = VECTOR('',#113873,1.); +#113873 = DIRECTION('',(-1.,0.,0.)); +#113874 = ORIENTED_EDGE('',*,*,#108647,.T.); +#113875 = PLANE('',#113876); +#113876 = AXIS2_PLACEMENT_3D('',#113877,#113878,#113879); +#113877 = CARTESIAN_POINT('',(-6.575,3.078346365008,-1.409201385868)); +#113878 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#113879 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#113880 = ADVANCED_FACE('',(#113881),#113892,.T.); +#113881 = FACE_BOUND('',#113882,.T.); +#113882 = EDGE_LOOP('',(#113883,#113884,#113885,#113891)); +#113883 = ORIENTED_EDGE('',*,*,#113869,.T.); +#113884 = ORIENTED_EDGE('',*,*,#110811,.F.); +#113885 = ORIENTED_EDGE('',*,*,#113886,.F.); +#113886 = EDGE_CURVE('',#108656,#110804,#113887,.T.); +#113887 = LINE('',#113888,#113889); +#113888 = CARTESIAN_POINT('',(-6.575,3.117589292885,-1.462678558785)); +#113889 = VECTOR('',#113890,1.); +#113890 = DIRECTION('',(-1.,0.,0.)); +#113891 = ORIENTED_EDGE('',*,*,#108655,.T.); +#113892 = PLANE('',#113893); +#113893 = AXIS2_PLACEMENT_3D('',#113894,#113895,#113896); +#113894 = CARTESIAN_POINT('',(-6.575,3.117589292885,-1.462678558785)); +#113895 = DIRECTION('',(0.,-0.806215626849,-0.591621807428)); +#113896 = DIRECTION('',(0.,0.591621807428,-0.806215626849)); +#113897 = ADVANCED_FACE('',(#113898),#113909,.T.); +#113898 = FACE_BOUND('',#113899,.T.); +#113899 = EDGE_LOOP('',(#113900,#113901,#113902,#113908)); +#113900 = ORIENTED_EDGE('',*,*,#113886,.T.); +#113901 = ORIENTED_EDGE('',*,*,#110803,.F.); +#113902 = ORIENTED_EDGE('',*,*,#113903,.F.); +#113903 = EDGE_CURVE('',#108664,#110796,#113904,.T.); +#113904 = LINE('',#113905,#113906); +#113905 = CARTESIAN_POINT('',(-6.575,3.219514052499,-1.535156867823)); +#113906 = VECTOR('',#113907,1.); +#113907 = DIRECTION('',(-1.,0.,0.)); +#113908 = ORIENTED_EDGE('',*,*,#108663,.T.); +#113909 = PLANE('',#113910); +#113910 = AXIS2_PLACEMENT_3D('',#113911,#113912,#113913); +#113911 = CARTESIAN_POINT('',(-6.575,3.219514052499,-1.535156867823)); +#113912 = DIRECTION('',(0.,-0.579515714459,-0.814961064527)); +#113913 = DIRECTION('',(0.,-0.814961064527,0.579515714459)); +#113914 = ADVANCED_FACE('',(#113915),#113926,.T.); +#113915 = FACE_BOUND('',#113916,.T.); +#113916 = EDGE_LOOP('',(#113917,#113918,#113919,#113925)); +#113917 = ORIENTED_EDGE('',*,*,#113903,.T.); +#113918 = ORIENTED_EDGE('',*,*,#110795,.F.); +#113919 = ORIENTED_EDGE('',*,*,#113920,.F.); +#113920 = EDGE_CURVE('',#108672,#110788,#113921,.T.); +#113921 = LINE('',#113922,#113923); +#113922 = CARTESIAN_POINT('',(-6.575,3.106404087797,-1.812727710775)); +#113923 = VECTOR('',#113924,1.); +#113924 = DIRECTION('',(-1.,0.,0.)); +#113925 = ORIENTED_EDGE('',*,*,#108671,.T.); +#113926 = PLANE('',#113927); +#113927 = AXIS2_PLACEMENT_3D('',#113928,#113929,#113930); +#113928 = CARTESIAN_POINT('',(-6.575,3.106404087797,-1.812727710775)); +#113929 = DIRECTION('',(0.,-0.92606257533,0.377369986318)); +#113930 = DIRECTION('',(-1.,0.,0.)); +#113931 = ADVANCED_FACE('',(#113932),#113943,.T.); +#113932 = FACE_BOUND('',#113933,.T.); +#113933 = EDGE_LOOP('',(#113934,#113935,#113936,#113942)); +#113934 = ORIENTED_EDGE('',*,*,#113920,.T.); +#113935 = ORIENTED_EDGE('',*,*,#110787,.F.); +#113936 = ORIENTED_EDGE('',*,*,#113937,.F.); +#113937 = EDGE_CURVE('',#108680,#110780,#113938,.T.); +#113938 = LINE('',#113939,#113940); +#113939 = CARTESIAN_POINT('',(-6.575,3.086782637815,-1.785989143004)); +#113940 = VECTOR('',#113941,1.); +#113941 = DIRECTION('',(-1.,0.,0.)); +#113942 = ORIENTED_EDGE('',*,*,#108679,.T.); +#113943 = PLANE('',#113944); +#113944 = AXIS2_PLACEMENT_3D('',#113945,#113946,#113947); +#113945 = CARTESIAN_POINT('',(-6.575,3.086782637815,-1.785989143004)); +#113946 = DIRECTION('',(-0.,0.806215630331,0.591621802683)); +#113947 = DIRECTION('',(1.,0.,0.)); +#113948 = ADVANCED_FACE('',(#113949),#113960,.T.); +#113949 = FACE_BOUND('',#113950,.T.); +#113950 = EDGE_LOOP('',(#113951,#113952,#113953,#113959)); +#113951 = ORIENTED_EDGE('',*,*,#113937,.T.); +#113952 = ORIENTED_EDGE('',*,*,#110779,.F.); +#113953 = ORIENTED_EDGE('',*,*,#113954,.F.); +#113954 = EDGE_CURVE('',#108688,#110772,#113955,.T.); +#113955 = LINE('',#113956,#113957); +#113956 = CARTESIAN_POINT('',(-6.575,3.064527184097,-1.744591728096)); +#113957 = VECTOR('',#113958,1.); +#113958 = DIRECTION('',(-1.,0.,0.)); +#113959 = ORIENTED_EDGE('',*,*,#108687,.T.); +#113960 = PLANE('',#113961); +#113961 = AXIS2_PLACEMENT_3D('',#113962,#113963,#113964); +#113962 = CARTESIAN_POINT('',(-6.575,3.064527184097,-1.744591728096)); +#113963 = DIRECTION('',(-0.,0.880785858285,0.473514806363)); +#113964 = DIRECTION('',(1.,0.,0.)); +#113965 = ADVANCED_FACE('',(#113966),#113977,.T.); +#113966 = FACE_BOUND('',#113967,.T.); +#113967 = EDGE_LOOP('',(#113968,#113969,#113970,#113976)); +#113968 = ORIENTED_EDGE('',*,*,#113954,.T.); +#113969 = ORIENTED_EDGE('',*,*,#110771,.F.); +#113970 = ORIENTED_EDGE('',*,*,#113971,.F.); +#113971 = EDGE_CURVE('',#108696,#110764,#113972,.T.); +#113972 = LINE('',#113973,#113974); +#113973 = CARTESIAN_POINT('',(-6.575,3.048723157995,-1.656638624735)); +#113974 = VECTOR('',#113975,1.); +#113975 = DIRECTION('',(-1.,0.,0.)); +#113976 = ORIENTED_EDGE('',*,*,#108695,.T.); +#113977 = PLANE('',#113978); +#113978 = AXIS2_PLACEMENT_3D('',#113979,#113980,#113981); +#113979 = CARTESIAN_POINT('',(-6.575,3.048723157995,-1.656638624735)); +#113980 = DIRECTION('',(-0.,0.98423699659,0.176854557597)); +#113981 = DIRECTION('',(1.,0.,0.)); +#113982 = ADVANCED_FACE('',(#113983),#113994,.T.); +#113983 = FACE_BOUND('',#113984,.T.); +#113984 = EDGE_LOOP('',(#113985,#113986,#113987,#113993)); +#113985 = ORIENTED_EDGE('',*,*,#113971,.T.); +#113986 = ORIENTED_EDGE('',*,*,#110763,.F.); +#113987 = ORIENTED_EDGE('',*,*,#113988,.F.); +#113988 = EDGE_CURVE('',#108704,#110756,#113989,.T.); +#113989 = LINE('',#113990,#113991); +#113990 = CARTESIAN_POINT('',(-6.575,2.991309305817,-1.666955145514)); +#113991 = VECTOR('',#113992,1.); +#113992 = DIRECTION('',(-1.,0.,0.)); +#113993 = ORIENTED_EDGE('',*,*,#108703,.T.); +#113994 = PLANE('',#113995); +#113995 = AXIS2_PLACEMENT_3D('',#113996,#113997,#113998); +#113996 = CARTESIAN_POINT('',(-6.575,2.991309305817,-1.666955145514)); +#113997 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#113998 = DIRECTION('',(-1.,0.,0.)); +#113999 = ADVANCED_FACE('',(#114000),#114011,.T.); +#114000 = FACE_BOUND('',#114001,.T.); +#114001 = EDGE_LOOP('',(#114002,#114003,#114004,#114010)); +#114002 = ORIENTED_EDGE('',*,*,#113988,.T.); +#114003 = ORIENTED_EDGE('',*,*,#110755,.F.); +#114004 = ORIENTED_EDGE('',*,*,#114005,.F.); +#114005 = EDGE_CURVE('',#108712,#110748,#114006,.T.); +#114006 = LINE('',#114007,#114008); +#114007 = CARTESIAN_POINT('',(-6.575,3.007113331919,-1.754908248875)); +#114008 = VECTOR('',#114009,1.); +#114009 = DIRECTION('',(-1.,0.,0.)); +#114010 = ORIENTED_EDGE('',*,*,#108711,.T.); +#114011 = PLANE('',#114012); +#114012 = AXIS2_PLACEMENT_3D('',#114013,#114014,#114015); +#114013 = CARTESIAN_POINT('',(-6.575,3.007113331919,-1.754908248875)); +#114014 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#114015 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114016 = ADVANCED_FACE('',(#114017),#114028,.T.); +#114017 = FACE_BOUND('',#114018,.T.); +#114018 = EDGE_LOOP('',(#114019,#114020,#114021,#114027)); +#114019 = ORIENTED_EDGE('',*,*,#114005,.T.); +#114020 = ORIENTED_EDGE('',*,*,#110747,.F.); +#114021 = ORIENTED_EDGE('',*,*,#114022,.F.); +#114022 = EDGE_CURVE('',#108720,#110740,#114023,.T.); +#114023 = LINE('',#114024,#114025); +#114024 = CARTESIAN_POINT('',(-6.575,3.048990276684,-1.823044224175)); +#114025 = VECTOR('',#114026,1.); +#114026 = DIRECTION('',(-1.,0.,0.)); +#114027 = ORIENTED_EDGE('',*,*,#108719,.T.); +#114028 = PLANE('',#114029); +#114029 = AXIS2_PLACEMENT_3D('',#114030,#114031,#114032); +#114030 = CARTESIAN_POINT('',(-6.575,3.048990276684,-1.823044224175)); +#114031 = DIRECTION('',(0.,-0.851953342675,-0.523617705875)); +#114032 = DIRECTION('',(0.,0.523617705875,-0.851953342675)); +#114033 = ADVANCED_FACE('',(#114034),#114045,.T.); +#114034 = FACE_BOUND('',#114035,.T.); +#114035 = EDGE_LOOP('',(#114036,#114037,#114038,#114044)); +#114036 = ORIENTED_EDGE('',*,*,#114022,.T.); +#114037 = ORIENTED_EDGE('',*,*,#110739,.F.); +#114038 = ORIENTED_EDGE('',*,*,#114039,.F.); +#114039 = EDGE_CURVE('',#108728,#110732,#114040,.T.); +#114040 = LINE('',#114041,#114042); +#114041 = CARTESIAN_POINT('',(-6.575,3.085599215824,-1.861862515465)); +#114042 = VECTOR('',#114043,1.); +#114043 = DIRECTION('',(-1.,0.,0.)); +#114044 = ORIENTED_EDGE('',*,*,#108727,.T.); +#114045 = PLANE('',#114046); +#114046 = AXIS2_PLACEMENT_3D('',#114047,#114048,#114049); +#114047 = CARTESIAN_POINT('',(-6.575,3.085599215824,-1.861862515465)); +#114048 = DIRECTION('',(0.,-0.727506745518,-0.686100528513)); +#114049 = DIRECTION('',(0.,0.686100528513,-0.727506745518)); +#114050 = ADVANCED_FACE('',(#114051),#114062,.T.); +#114051 = FACE_BOUND('',#114052,.T.); +#114052 = EDGE_LOOP('',(#114053,#114054,#114055,#114061)); +#114053 = ORIENTED_EDGE('',*,*,#114039,.T.); +#114054 = ORIENTED_EDGE('',*,*,#110731,.F.); +#114055 = ORIENTED_EDGE('',*,*,#114056,.F.); +#114056 = EDGE_CURVE('',#108736,#110724,#114057,.T.); +#114057 = LINE('',#114058,#114059); +#114058 = CARTESIAN_POINT('',(-6.575,3.043989387903,-1.960132129338)); +#114059 = VECTOR('',#114060,1.); +#114060 = DIRECTION('',(-1.,8.881784197002E-14,6.661338147752E-14)); +#114061 = ORIENTED_EDGE('',*,*,#108735,.T.); +#114062 = PLANE('',#114063); +#114063 = AXIS2_PLACEMENT_3D('',#114064,#114065,#114066); +#114064 = CARTESIAN_POINT('',(-6.575,3.043989387903,-1.960132129338)); +#114065 = DIRECTION('',(0.,-0.920852134995,0.389911971444)); +#114066 = DIRECTION('',(-1.,0.,0.)); +#114067 = ADVANCED_FACE('',(#114068),#114079,.T.); +#114068 = FACE_BOUND('',#114069,.T.); +#114069 = EDGE_LOOP('',(#114070,#114071,#114072,#114078)); +#114070 = ORIENTED_EDGE('',*,*,#114056,.T.); +#114071 = ORIENTED_EDGE('',*,*,#110723,.F.); +#114072 = ORIENTED_EDGE('',*,*,#114073,.F.); +#114073 = EDGE_CURVE('',#108744,#110716,#114074,.T.); +#114074 = LINE('',#114075,#114076); +#114075 = CARTESIAN_POINT('',(-6.575,3.115756682593,-1.947236482054)); +#114076 = VECTOR('',#114077,1.); +#114077 = DIRECTION('',(-1.,0.,0.)); +#114078 = ORIENTED_EDGE('',*,*,#108743,.T.); +#114079 = PLANE('',#114080); +#114080 = AXIS2_PLACEMENT_3D('',#114081,#114082,#114083); +#114081 = CARTESIAN_POINT('',(-6.575,3.115756682593,-1.947236482054)); +#114082 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114083 = DIRECTION('',(-1.,0.,0.)); +#114084 = ADVANCED_FACE('',(#114085),#114096,.T.); +#114085 = FACE_BOUND('',#114086,.T.); +#114086 = EDGE_LOOP('',(#114087,#114088,#114089,#114095)); +#114087 = ORIENTED_EDGE('',*,*,#114073,.T.); +#114088 = ORIENTED_EDGE('',*,*,#110715,.F.); +#114089 = ORIENTED_EDGE('',*,*,#114090,.F.); +#114090 = EDGE_CURVE('',#108752,#110708,#114091,.T.); +#114091 = LINE('',#114092,#114093); +#114092 = CARTESIAN_POINT('',(-6.575,3.136561596553,-1.898101675117)); +#114093 = VECTOR('',#114094,1.); +#114094 = DIRECTION('',(-1.,0.,0.)); +#114095 = ORIENTED_EDGE('',*,*,#108751,.T.); +#114096 = PLANE('',#114097); +#114097 = AXIS2_PLACEMENT_3D('',#114098,#114099,#114100); +#114098 = CARTESIAN_POINT('',(-6.575,3.136561596553,-1.898101675117)); +#114099 = DIRECTION('',(0.,0.920852134995,-0.389911971444)); +#114100 = DIRECTION('',(-1.,0.,0.)); +#114101 = ADVANCED_FACE('',(#114102),#114113,.T.); +#114102 = FACE_BOUND('',#114103,.T.); +#114103 = EDGE_LOOP('',(#114104,#114105,#114106,#114112)); +#114104 = ORIENTED_EDGE('',*,*,#114090,.T.); +#114105 = ORIENTED_EDGE('',*,*,#110707,.F.); +#114106 = ORIENTED_EDGE('',*,*,#114107,.F.); +#114107 = EDGE_CURVE('',#108760,#110700,#114108,.T.); +#114108 = LINE('',#114109,#114110); +#114109 = CARTESIAN_POINT('',(-6.575,3.199243415828,-1.917102859843)); +#114110 = VECTOR('',#114111,1.); +#114111 = DIRECTION('',(-1.,0.,0.)); +#114112 = ORIENTED_EDGE('',*,*,#108759,.T.); +#114113 = PLANE('',#114114); +#114114 = AXIS2_PLACEMENT_3D('',#114115,#114116,#114117); +#114115 = CARTESIAN_POINT('',(-6.575,3.199243415828,-1.917102859843)); +#114116 = DIRECTION('',(0.,-0.290100999667,-0.956996034471)); +#114117 = DIRECTION('',(0.,-0.956996034471,0.290100999667)); +#114118 = ADVANCED_FACE('',(#114119),#114130,.T.); +#114119 = FACE_BOUND('',#114120,.T.); +#114120 = EDGE_LOOP('',(#114121,#114122,#114123,#114129)); +#114121 = ORIENTED_EDGE('',*,*,#114107,.T.); +#114122 = ORIENTED_EDGE('',*,*,#110699,.F.); +#114123 = ORIENTED_EDGE('',*,*,#114124,.F.); +#114124 = EDGE_CURVE('',#108768,#110692,#114125,.T.); +#114125 = LINE('',#114126,#114127); +#114126 = CARTESIAN_POINT('',(-6.575,3.25929125144,-1.921445191174)); +#114127 = VECTOR('',#114128,1.); +#114128 = DIRECTION('',(-1.,0.,0.)); +#114129 = ORIENTED_EDGE('',*,*,#108767,.T.); +#114130 = PLANE('',#114131); +#114131 = AXIS2_PLACEMENT_3D('',#114132,#114133,#114134); +#114132 = CARTESIAN_POINT('',(-6.575,3.25929125144,-1.921445191174)); +#114133 = DIRECTION('',(0.,-7.212619319717E-02,-0.997395514455)); +#114134 = DIRECTION('',(0.,-0.997395514455,7.212619319717E-02)); +#114135 = ADVANCED_FACE('',(#114136),#114147,.T.); +#114136 = FACE_BOUND('',#114137,.T.); +#114137 = EDGE_LOOP('',(#114138,#114139,#114140,#114146)); +#114138 = ORIENTED_EDGE('',*,*,#114124,.T.); +#114139 = ORIENTED_EDGE('',*,*,#110691,.F.); +#114140 = ORIENTED_EDGE('',*,*,#114141,.F.); +#114141 = EDGE_CURVE('',#108776,#110684,#114142,.T.); +#114142 = LINE('',#114143,#114144); +#114143 = CARTESIAN_POINT('',(-6.575,3.30235162004,-1.91370780428)); +#114144 = VECTOR('',#114145,1.); +#114145 = DIRECTION('',(-1.,0.,0.)); +#114146 = ORIENTED_EDGE('',*,*,#108775,.T.); +#114147 = PLANE('',#114148); +#114148 = AXIS2_PLACEMENT_3D('',#114149,#114150,#114151); +#114149 = CARTESIAN_POINT('',(-6.575,3.30235162004,-1.91370780428)); +#114150 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114151 = DIRECTION('',(-1.,0.,0.)); +#114152 = ADVANCED_FACE('',(#114153),#114164,.T.); +#114153 = FACE_BOUND('',#114154,.T.); +#114154 = EDGE_LOOP('',(#114155,#114156,#114157,#114163)); +#114155 = ORIENTED_EDGE('',*,*,#114141,.T.); +#114156 = ORIENTED_EDGE('',*,*,#110683,.F.); +#114157 = ORIENTED_EDGE('',*,*,#114158,.F.); +#114158 = EDGE_CURVE('',#108784,#110676,#114159,.T.); +#114159 = LINE('',#114160,#114161); +#114160 = CARTESIAN_POINT('',(-6.575,3.357131437453,-1.888732440613)); +#114161 = VECTOR('',#114162,1.); +#114162 = DIRECTION('',(-1.,0.,0.)); +#114163 = ORIENTED_EDGE('',*,*,#108783,.T.); +#114164 = PLANE('',#114165); +#114165 = AXIS2_PLACEMENT_3D('',#114166,#114167,#114168); +#114166 = CARTESIAN_POINT('',(-6.575,3.357131437453,-1.888732440613)); +#114167 = DIRECTION('',(0.,0.414841261481,-0.909893800272)); +#114168 = DIRECTION('',(-1.,0.,0.)); +#114169 = ADVANCED_FACE('',(#114170),#114181,.T.); +#114170 = FACE_BOUND('',#114171,.T.); +#114171 = EDGE_LOOP('',(#114172,#114173,#114174,#114180)); +#114172 = ORIENTED_EDGE('',*,*,#114158,.T.); +#114173 = ORIENTED_EDGE('',*,*,#110675,.F.); +#114174 = ORIENTED_EDGE('',*,*,#114175,.F.); +#114175 = EDGE_CURVE('',#108792,#110668,#114176,.T.); +#114176 = LINE('',#114177,#114178); +#114177 = CARTESIAN_POINT('',(-6.575,3.40927725067,-1.849098227243)); +#114178 = VECTOR('',#114179,1.); +#114179 = DIRECTION('',(-1.,0.,0.)); +#114180 = ORIENTED_EDGE('',*,*,#108791,.T.); +#114181 = PLANE('',#114182); +#114182 = AXIS2_PLACEMENT_3D('',#114183,#114184,#114185); +#114183 = CARTESIAN_POINT('',(-6.575,3.40927725067,-1.849098227243)); +#114184 = DIRECTION('',(0.,0.605116125922,-0.796137220678)); +#114185 = DIRECTION('',(-1.,0.,0.)); +#114186 = ADVANCED_FACE('',(#114187),#114198,.T.); +#114187 = FACE_BOUND('',#114188,.T.); +#114188 = EDGE_LOOP('',(#114189,#114190,#114191,#114197)); +#114189 = ORIENTED_EDGE('',*,*,#114175,.T.); +#114190 = ORIENTED_EDGE('',*,*,#110667,.F.); +#114191 = ORIENTED_EDGE('',*,*,#114192,.F.); +#114192 = EDGE_CURVE('',#108800,#110660,#114193,.T.); +#114193 = LINE('',#114194,#114195); +#114194 = CARTESIAN_POINT('',(-6.575,3.444435607143,-1.797384293801)); +#114195 = VECTOR('',#114196,1.); +#114196 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#114197 = ORIENTED_EDGE('',*,*,#108799,.T.); +#114198 = PLANE('',#114199); +#114199 = AXIS2_PLACEMENT_3D('',#114200,#114201,#114202); +#114200 = CARTESIAN_POINT('',(-6.575,3.444435607143,-1.797384293801)); +#114201 = DIRECTION('',(0.,0.826979428687,-0.562232180267)); +#114202 = DIRECTION('',(-1.,0.,0.)); +#114203 = ADVANCED_FACE('',(#114204),#114215,.T.); +#114204 = FACE_BOUND('',#114205,.T.); +#114205 = EDGE_LOOP('',(#114206,#114207,#114208,#114214)); +#114206 = ORIENTED_EDGE('',*,*,#114192,.T.); +#114207 = ORIENTED_EDGE('',*,*,#110659,.F.); +#114208 = ORIENTED_EDGE('',*,*,#114209,.F.); +#114209 = EDGE_CURVE('',#108808,#110652,#114210,.T.); +#114210 = LINE('',#114211,#114212); +#114211 = CARTESIAN_POINT('',(-6.575,3.465240506065,-1.748249484268)); +#114212 = VECTOR('',#114213,1.); +#114213 = DIRECTION('',(-1.,0.,0.)); +#114214 = ORIENTED_EDGE('',*,*,#108807,.T.); +#114215 = PLANE('',#114216); +#114216 = AXIS2_PLACEMENT_3D('',#114217,#114218,#114219); +#114217 = CARTESIAN_POINT('',(-6.575,3.465240506065,-1.748249484268)); +#114218 = DIRECTION('',(0.,0.92085224359,-0.389911714975)); +#114219 = DIRECTION('',(-1.,0.,0.)); +#114220 = ADVANCED_FACE('',(#114221),#114232,.T.); +#114221 = FACE_BOUND('',#114222,.T.); +#114222 = EDGE_LOOP('',(#114223,#114224,#114225,#114231)); +#114223 = ORIENTED_EDGE('',*,*,#114209,.T.); +#114224 = ORIENTED_EDGE('',*,*,#110651,.F.); +#114225 = ORIENTED_EDGE('',*,*,#114226,.F.); +#114226 = EDGE_CURVE('',#108816,#110644,#114227,.T.); +#114227 = LINE('',#114228,#114229); +#114228 = CARTESIAN_POINT('',(-6.575,3.471691951487,-1.701693813812)); +#114229 = VECTOR('',#114230,1.); +#114230 = DIRECTION('',(-1.,0.,0.)); +#114231 = ORIENTED_EDGE('',*,*,#108815,.T.); +#114232 = PLANE('',#114233); +#114233 = AXIS2_PLACEMENT_3D('',#114234,#114235,#114236); +#114234 = CARTESIAN_POINT('',(-6.575,3.471691951487,-1.701693813812)); +#114235 = DIRECTION('',(0.,0.990534611121,-0.137263193072)); +#114236 = DIRECTION('',(-1.,0.,0.)); +#114237 = ADVANCED_FACE('',(#114238),#114249,.T.); +#114238 = FACE_BOUND('',#114239,.T.); +#114239 = EDGE_LOOP('',(#114240,#114241,#114242,#114248)); +#114240 = ORIENTED_EDGE('',*,*,#114226,.T.); +#114241 = ORIENTED_EDGE('',*,*,#110643,.F.); +#114242 = ORIENTED_EDGE('',*,*,#114243,.F.); +#114243 = EDGE_CURVE('',#108824,#110636,#114244,.T.); +#114244 = LINE('',#114245,#114246); +#114245 = CARTESIAN_POINT('',(-6.575,3.466423944016,-1.672376119536)); +#114246 = VECTOR('',#114247,1.); +#114247 = DIRECTION('',(-1.,0.,0.)); +#114248 = ORIENTED_EDGE('',*,*,#108823,.T.); +#114249 = PLANE('',#114250); +#114250 = AXIS2_PLACEMENT_3D('',#114251,#114252,#114253); +#114251 = CARTESIAN_POINT('',(-6.575,3.466423944016,-1.672376119536)); +#114252 = DIRECTION('',(-0.,0.98423699659,0.176854557597)); +#114253 = DIRECTION('',(1.,0.,0.)); +#114254 = ADVANCED_FACE('',(#114255),#114266,.T.); +#114255 = FACE_BOUND('',#114256,.T.); +#114256 = EDGE_LOOP('',(#114257,#114258,#114259,#114265)); +#114257 = ORIENTED_EDGE('',*,*,#114243,.T.); +#114258 = ORIENTED_EDGE('',*,*,#110635,.F.); +#114259 = ORIENTED_EDGE('',*,*,#114260,.F.); +#114260 = EDGE_CURVE('',#108832,#110628,#114261,.T.); +#114261 = LINE('',#114262,#114263); +#114262 = CARTESIAN_POINT('',(-6.575,3.444168476182,-1.630978707164)); +#114263 = VECTOR('',#114264,1.); +#114264 = DIRECTION('',(-1.,0.,0.)); +#114265 = ORIENTED_EDGE('',*,*,#108831,.T.); +#114266 = PLANE('',#114267); +#114267 = AXIS2_PLACEMENT_3D('',#114268,#114269,#114270); +#114268 = CARTESIAN_POINT('',(-6.575,3.444168476182,-1.630978707164)); +#114269 = DIRECTION('',(-0.,0.880785720922,0.473515061872)); +#114270 = DIRECTION('',(1.,0.,0.)); +#114271 = ADVANCED_FACE('',(#114272),#114278,.T.); +#114272 = FACE_BOUND('',#114273,.T.); +#114273 = EDGE_LOOP('',(#114274,#114275,#114276,#114277)); +#114274 = ORIENTED_EDGE('',*,*,#114260,.T.); +#114275 = ORIENTED_EDGE('',*,*,#110625,.F.); +#114276 = ORIENTED_EDGE('',*,*,#113641,.F.); +#114277 = ORIENTED_EDGE('',*,*,#108839,.T.); +#114278 = PLANE('',#114279); +#114279 = AXIS2_PLACEMENT_3D('',#114280,#114281,#114282); +#114280 = CARTESIAN_POINT('',(-6.575,3.390572087667,-1.580080685205)); +#114281 = DIRECTION('',(-0.,0.688617555241,0.725124722109)); +#114282 = DIRECTION('',(1.,0.,0.)); +#114283 = ADVANCED_FACE('',(#114284),#114300,.T.); +#114284 = FACE_BOUND('',#114285,.T.); +#114285 = EDGE_LOOP('',(#114286,#114292,#114293,#114299)); +#114286 = ORIENTED_EDGE('',*,*,#114287,.T.); +#114287 = EDGE_CURVE('',#106892,#110932,#114288,.T.); +#114288 = LINE('',#114289,#114290); +#114289 = CARTESIAN_POINT('',(-6.575,3.248755235576,-1.86280979749)); +#114290 = VECTOR('',#114291,1.); +#114291 = DIRECTION('',(-1.,0.,0.)); +#114292 = ORIENTED_EDGE('',*,*,#111013,.F.); +#114293 = ORIENTED_EDGE('',*,*,#114294,.F.); +#114294 = EDGE_CURVE('',#106820,#111006,#114295,.T.); +#114295 = LINE('',#114296,#114297); +#114296 = CARTESIAN_POINT('',(-6.575,3.188707399273,-1.858467462308)); +#114297 = VECTOR('',#114298,1.); +#114298 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#114299 = ORIENTED_EDGE('',*,*,#106899,.T.); +#114300 = PLANE('',#114301); +#114301 = AXIS2_PLACEMENT_3D('',#114302,#114303,#114304); +#114302 = CARTESIAN_POINT('',(-6.575,3.188707399273,-1.858467462308)); +#114303 = DIRECTION('',(-0.,7.212625598476E-02,0.997395509915)); +#114304 = DIRECTION('',(1.,0.,0.)); +#114305 = ADVANCED_FACE('',(#114306),#114317,.T.); +#114306 = FACE_BOUND('',#114307,.T.); +#114307 = EDGE_LOOP('',(#114308,#114309,#114310,#114316)); +#114308 = ORIENTED_EDGE('',*,*,#114294,.T.); +#114309 = ORIENTED_EDGE('',*,*,#111005,.F.); +#114310 = ORIENTED_EDGE('',*,*,#114311,.F.); +#114311 = EDGE_CURVE('',#106818,#110998,#114312,.T.); +#114312 = LINE('',#114313,#114314); +#114313 = CARTESIAN_POINT('',(-6.575,3.157366489981,-1.84896687187)); +#114314 = VECTOR('',#114315,1.); +#114315 = DIRECTION('',(-1.,4.440892098501E-14,0.)); +#114316 = ORIENTED_EDGE('',*,*,#106817,.T.); +#114317 = PLANE('',#114318); +#114318 = AXIS2_PLACEMENT_3D('',#114319,#114320,#114321); +#114319 = CARTESIAN_POINT('',(-6.575,3.157366489981,-1.84896687187)); +#114320 = DIRECTION('',(-0.,0.290100948767,0.9569960499)); +#114321 = DIRECTION('',(1.,0.,0.)); +#114322 = ADVANCED_FACE('',(#114323),#114334,.T.); +#114323 = FACE_BOUND('',#114324,.T.); +#114324 = EDGE_LOOP('',(#114325,#114326,#114327,#114333)); +#114325 = ORIENTED_EDGE('',*,*,#114311,.T.); +#114326 = ORIENTED_EDGE('',*,*,#110997,.F.); +#114327 = ORIENTED_EDGE('',*,*,#114328,.F.); +#114328 = EDGE_CURVE('',#106828,#110990,#114329,.T.); +#114329 = LINE('',#114330,#114331); +#114330 = CARTESIAN_POINT('',(-6.575,3.270476432305,-1.571396022342)); +#114331 = VECTOR('',#114332,1.); +#114332 = DIRECTION('',(-1.,0.,-4.440892098501E-14)); +#114333 = ORIENTED_EDGE('',*,*,#106827,.T.); +#114334 = PLANE('',#114335); +#114335 = AXIS2_PLACEMENT_3D('',#114336,#114337,#114338); +#114336 = CARTESIAN_POINT('',(-6.575,3.270476432305,-1.571396022342)); +#114337 = DIRECTION('',(0.,0.926062604545,-0.377369914624)); +#114338 = DIRECTION('',(-1.,0.,0.)); +#114339 = ADVANCED_FACE('',(#114340),#114351,.T.); +#114340 = FACE_BOUND('',#114341,.T.); +#114341 = EDGE_LOOP('',(#114342,#114343,#114344,#114350)); +#114342 = ORIENTED_EDGE('',*,*,#114328,.T.); +#114343 = ORIENTED_EDGE('',*,*,#110989,.F.); +#114344 = ORIENTED_EDGE('',*,*,#114345,.F.); +#114345 = EDGE_CURVE('',#106836,#110982,#114346,.T.); +#114346 = LINE('',#114347,#114348); +#114347 = CARTESIAN_POINT('',(-6.575,3.372401195608,-1.643874351912)); +#114348 = VECTOR('',#114349,1.); +#114349 = DIRECTION('',(-1.,4.440892098501E-14,-4.440892098501E-14)); +#114350 = ORIENTED_EDGE('',*,*,#106835,.T.); +#114351 = PLANE('',#114352); +#114352 = AXIS2_PLACEMENT_3D('',#114353,#114354,#114355); +#114353 = CARTESIAN_POINT('',(-6.575,3.372401195608,-1.643874351912)); +#114354 = DIRECTION('',(0.,-0.579515809565,-0.814960996898)); +#114355 = DIRECTION('',(0.,-0.814960996898,0.579515809565)); +#114356 = ADVANCED_FACE('',(#114357),#114368,.T.); +#114357 = FACE_BOUND('',#114358,.T.); +#114358 = EDGE_LOOP('',(#114359,#114360,#114361,#114367)); +#114359 = ORIENTED_EDGE('',*,*,#114345,.T.); +#114360 = ORIENTED_EDGE('',*,*,#110981,.F.); +#114361 = ORIENTED_EDGE('',*,*,#114362,.F.); +#114362 = EDGE_CURVE('',#106844,#110974,#114363,.T.); +#114363 = LINE('',#114364,#114365); +#114364 = CARTESIAN_POINT('',(-6.575,3.409010117504,-1.682692635704)); +#114365 = VECTOR('',#114366,1.); +#114366 = DIRECTION('',(-1.,0.,0.)); +#114367 = ORIENTED_EDGE('',*,*,#106843,.T.); +#114368 = PLANE('',#114369); +#114369 = AXIS2_PLACEMENT_3D('',#114370,#114371,#114372); +#114370 = CARTESIAN_POINT('',(-6.575,3.409010117504,-1.682692635704)); +#114371 = DIRECTION('',(0.,-0.727506840672,-0.686100427617)); +#114372 = DIRECTION('',(0.,0.686100427617,-0.727506840672)); +#114373 = ADVANCED_FACE('',(#114374),#114385,.T.); +#114374 = FACE_BOUND('',#114375,.T.); +#114375 = EDGE_LOOP('',(#114376,#114377,#114378,#114384)); +#114376 = ORIENTED_EDGE('',*,*,#114362,.T.); +#114377 = ORIENTED_EDGE('',*,*,#110973,.F.); +#114378 = ORIENTED_EDGE('',*,*,#114379,.F.); +#114379 = EDGE_CURVE('',#106852,#110966,#114380,.T.); +#114380 = LINE('',#114381,#114382); +#114381 = CARTESIAN_POINT('',(-6.575,3.41691212871,-1.726669177117)); +#114382 = VECTOR('',#114383,1.); +#114383 = DIRECTION('',(-1.,0.,0.)); +#114384 = ORIENTED_EDGE('',*,*,#106851,.T.); +#114385 = PLANE('',#114386); +#114386 = AXIS2_PLACEMENT_3D('',#114387,#114388,#114389); +#114387 = CARTESIAN_POINT('',(-6.575,3.41691212871,-1.726669177117)); +#114388 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#114389 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114390 = ADVANCED_FACE('',(#114391),#114402,.T.); +#114391 = FACE_BOUND('',#114392,.T.); +#114392 = EDGE_LOOP('',(#114393,#114394,#114395,#114401)); +#114393 = ORIENTED_EDGE('',*,*,#114379,.T.); +#114394 = ORIENTED_EDGE('',*,*,#110965,.F.); +#114395 = ORIENTED_EDGE('',*,*,#114396,.F.); +#114396 = EDGE_CURVE('',#106860,#110958,#114397,.T.); +#114397 = LINE('',#114398,#114399); +#114398 = CARTESIAN_POINT('',(-6.575,3.407826683402,-1.758565999743)); +#114399 = VECTOR('',#114400,1.); +#114400 = DIRECTION('',(-1.,1.33226762955E-13,6.661338147752E-14)); +#114401 = ORIENTED_EDGE('',*,*,#106859,.T.); +#114402 = PLANE('',#114403); +#114403 = AXIS2_PLACEMENT_3D('',#114404,#114405,#114406); +#114404 = CARTESIAN_POINT('',(-6.575,3.407826683402,-1.758565999743)); +#114405 = DIRECTION('',(0.,-0.96174610485,0.273942384099)); +#114406 = DIRECTION('',(-1.,0.,0.)); +#114407 = ADVANCED_FACE('',(#114408),#114419,.T.); +#114408 = FACE_BOUND('',#114409,.T.); +#114409 = EDGE_LOOP('',(#114410,#114411,#114412,#114418)); +#114410 = ORIENTED_EDGE('',*,*,#114396,.T.); +#114411 = ORIENTED_EDGE('',*,*,#110957,.F.); +#114412 = ORIENTED_EDGE('',*,*,#114413,.F.); +#114413 = EDGE_CURVE('',#106868,#110950,#114414,.T.); +#114414 = LINE('',#114415,#114416); +#114415 = CARTESIAN_POINT('',(-6.575,3.384387782028,-1.793041961908)); +#114416 = VECTOR('',#114417,1.); +#114417 = DIRECTION('',(-1.,0.,4.440892098501E-14)); +#114418 = ORIENTED_EDGE('',*,*,#106867,.T.); +#114419 = PLANE('',#114420); +#114420 = AXIS2_PLACEMENT_3D('',#114421,#114422,#114423); +#114421 = CARTESIAN_POINT('',(-6.575,3.384387782028,-1.793041961908)); +#114422 = DIRECTION('',(0.,-0.826979511052,0.562232059119)); +#114423 = DIRECTION('',(-1.,0.,0.)); +#114424 = ADVANCED_FACE('',(#114425),#114436,.T.); +#114425 = FACE_BOUND('',#114426,.T.); +#114426 = EDGE_LOOP('',(#114427,#114428,#114429,#114435)); +#114427 = ORIENTED_EDGE('',*,*,#114413,.T.); +#114428 = ORIENTED_EDGE('',*,*,#110949,.F.); +#114429 = ORIENTED_EDGE('',*,*,#114430,.F.); +#114430 = EDGE_CURVE('',#106876,#110942,#114431,.T.); +#114431 = LINE('',#114432,#114433); +#114432 = CARTESIAN_POINT('',(-6.575,3.346595420898,-1.830097043079)); +#114433 = VECTOR('',#114434,1.); +#114434 = DIRECTION('',(-1.,0.,0.)); +#114435 = ORIENTED_EDGE('',*,*,#106875,.T.); +#114436 = PLANE('',#114437); +#114437 = AXIS2_PLACEMENT_3D('',#114438,#114439,#114440); +#114438 = CARTESIAN_POINT('',(-6.575,3.346595420898,-1.830097043079)); +#114439 = DIRECTION('',(0.,-0.700107505636,0.714037450385)); +#114440 = DIRECTION('',(-1.,0.,0.)); +#114441 = ADVANCED_FACE('',(#114442),#114453,.T.); +#114442 = FACE_BOUND('',#114443,.T.); +#114443 = EDGE_LOOP('',(#114444,#114445,#114446,#114452)); +#114444 = ORIENTED_EDGE('',*,*,#114430,.T.); +#114445 = ORIENTED_EDGE('',*,*,#110941,.F.); +#114446 = ORIENTED_EDGE('',*,*,#114447,.F.); +#114447 = EDGE_CURVE('',#106884,#110934,#114448,.T.); +#114448 = LINE('',#114449,#114450); +#114449 = CARTESIAN_POINT('',(-6.575,3.306169046689,-1.852493284089)); +#114450 = VECTOR('',#114451,1.); +#114451 = DIRECTION('',(-1.,0.,0.)); +#114452 = ORIENTED_EDGE('',*,*,#106883,.T.); +#114453 = PLANE('',#114454); +#114454 = AXIS2_PLACEMENT_3D('',#114455,#114456,#114457); +#114455 = CARTESIAN_POINT('',(-6.575,3.306169046689,-1.852493284089)); +#114456 = DIRECTION('',(0.,-0.484603300806,0.874734040064)); +#114457 = DIRECTION('',(-1.,0.,0.)); +#114458 = ADVANCED_FACE('',(#114459),#114465,.T.); +#114459 = FACE_BOUND('',#114460,.T.); +#114460 = EDGE_LOOP('',(#114461,#114462,#114463,#114464)); +#114461 = ORIENTED_EDGE('',*,*,#114447,.T.); +#114462 = ORIENTED_EDGE('',*,*,#110931,.F.); +#114463 = ORIENTED_EDGE('',*,*,#114287,.F.); +#114464 = ORIENTED_EDGE('',*,*,#106891,.T.); +#114465 = PLANE('',#114466); +#114466 = AXIS2_PLACEMENT_3D('',#114467,#114468,#114469); +#114467 = CARTESIAN_POINT('',(-6.575,3.248755235576,-1.86280979749)); +#114468 = DIRECTION('',(0.,-0.176854557597,0.98423699659)); +#114469 = DIRECTION('',(-1.,0.,0.)); +#114470 = ADVANCED_FACE('',(#114471),#114487,.T.); +#114471 = FACE_BOUND('',#114472,.T.); +#114472 = EDGE_LOOP('',(#114473,#114479,#114480,#114486)); +#114473 = ORIENTED_EDGE('',*,*,#114474,.T.); +#114474 = EDGE_CURVE('',#106996,#111022,#114475,.T.); +#114475 = LINE('',#114476,#114477); +#114476 = CARTESIAN_POINT('',(-6.575,3.25848984773,-1.422228422613)); +#114477 = VECTOR('',#114478,1.); +#114478 = DIRECTION('',(-1.,0.,2.220446049251E-14)); +#114479 = ORIENTED_EDGE('',*,*,#111111,.F.); +#114480 = ORIENTED_EDGE('',*,*,#114481,.F.); +#114481 = EDGE_CURVE('',#106916,#111104,#114482,.T.); +#114482 = LINE('',#114483,#114484); +#114483 = CARTESIAN_POINT('',(-6.575,3.237684943114,-1.471363222571)); +#114484 = VECTOR('',#114485,1.); +#114485 = DIRECTION('',(-1.,0.,0.)); +#114486 = ORIENTED_EDGE('',*,*,#107003,.T.); +#114487 = PLANE('',#114488); +#114488 = AXIS2_PLACEMENT_3D('',#114489,#114490,#114491); +#114489 = CARTESIAN_POINT('',(-6.575,3.237684943114,-1.471363222571)); +#114490 = DIRECTION('',(0.,-0.92085217799,0.389911869903)); +#114491 = DIRECTION('',(-1.,0.,0.)); +#114492 = ADVANCED_FACE('',(#114493),#114504,.T.); +#114493 = FACE_BOUND('',#114494,.T.); +#114494 = EDGE_LOOP('',(#114495,#114496,#114497,#114503)); +#114495 = ORIENTED_EDGE('',*,*,#114481,.T.); +#114496 = ORIENTED_EDGE('',*,*,#111103,.F.); +#114497 = ORIENTED_EDGE('',*,*,#114498,.F.); +#114498 = EDGE_CURVE('',#106914,#111096,#114499,.T.); +#114499 = LINE('',#114500,#114501); +#114500 = CARTESIAN_POINT('',(-6.575,3.16973511706,-1.42304434742)); +#114501 = VECTOR('',#114502,1.); +#114502 = DIRECTION('',(-1.,0.,0.)); +#114503 = ORIENTED_EDGE('',*,*,#106913,.T.); +#114504 = PLANE('',#114505); +#114505 = AXIS2_PLACEMENT_3D('',#114506,#114507,#114508); +#114506 = CARTESIAN_POINT('',(-6.575,3.16973511706,-1.42304434742)); +#114507 = DIRECTION('',(-0.,0.579515811588,0.814960995459)); +#114508 = DIRECTION('',(1.,0.,0.)); +#114509 = ADVANCED_FACE('',(#114510),#114521,.T.); +#114510 = FACE_BOUND('',#114511,.T.); +#114511 = EDGE_LOOP('',(#114512,#114513,#114514,#114520)); +#114512 = ORIENTED_EDGE('',*,*,#114498,.T.); +#114513 = ORIENTED_EDGE('',*,*,#111095,.F.); +#114514 = ORIENTED_EDGE('',*,*,#114515,.F.); +#114515 = EDGE_CURVE('',#106924,#111088,#114516,.T.); +#114516 = LINE('',#114517,#114518); +#114517 = CARTESIAN_POINT('',(-6.575,3.133126172386,-1.38422602533)); +#114518 = VECTOR('',#114519,1.); +#114519 = DIRECTION('',(-1.,0.,0.)); +#114520 = ORIENTED_EDGE('',*,*,#106923,.T.); +#114521 = PLANE('',#114522); +#114522 = AXIS2_PLACEMENT_3D('',#114523,#114524,#114525); +#114523 = CARTESIAN_POINT('',(-6.575,3.133126172386,-1.38422602533)); +#114524 = DIRECTION('',(-0.,0.727506965463,0.686100295294)); +#114525 = DIRECTION('',(1.,0.,0.)); +#114526 = ADVANCED_FACE('',(#114527),#114538,.T.); +#114527 = FACE_BOUND('',#114528,.T.); +#114528 = EDGE_LOOP('',(#114529,#114530,#114531,#114537)); +#114529 = ORIENTED_EDGE('',*,*,#114515,.T.); +#114530 = ORIENTED_EDGE('',*,*,#111087,.F.); +#114531 = ORIENTED_EDGE('',*,*,#114532,.F.); +#114532 = EDGE_CURVE('',#106932,#111080,#114533,.T.); +#114533 = LINE('',#114534,#114535); +#114534 = CARTESIAN_POINT('',(-6.575,3.127858164915,-1.354908331054)); +#114535 = VECTOR('',#114536,1.); +#114536 = DIRECTION('',(-1.,0.,0.)); +#114537 = ORIENTED_EDGE('',*,*,#106931,.T.); +#114538 = PLANE('',#114539); +#114539 = AXIS2_PLACEMENT_3D('',#114540,#114541,#114542); +#114540 = CARTESIAN_POINT('',(-6.575,3.127858164915,-1.354908331054)); +#114541 = DIRECTION('',(-0.,0.98423699659,0.176854557597)); +#114542 = DIRECTION('',(1.,0.,0.)); +#114543 = ADVANCED_FACE('',(#114544),#114555,.T.); +#114544 = FACE_BOUND('',#114545,.T.); +#114545 = EDGE_LOOP('',(#114546,#114547,#114548,#114554)); +#114546 = ORIENTED_EDGE('',*,*,#114532,.T.); +#114547 = ORIENTED_EDGE('',*,*,#111079,.F.); +#114548 = ORIENTED_EDGE('',*,*,#114549,.F.); +#114549 = EDGE_CURVE('',#106940,#111072,#114550,.T.); +#114550 = LINE('',#114551,#114552); +#114551 = CARTESIAN_POINT('',(-6.575,3.148663079798,-1.305773529251)); +#114552 = VECTOR('',#114553,1.); +#114553 = DIRECTION('',(-1.,0.,0.)); +#114554 = ORIENTED_EDGE('',*,*,#106939,.T.); +#114555 = PLANE('',#114556); +#114556 = AXIS2_PLACEMENT_3D('',#114557,#114558,#114559); +#114557 = CARTESIAN_POINT('',(-6.575,3.148663079798,-1.305773529251)); +#114558 = DIRECTION('',(0.,0.920852114162,-0.389912020644)); +#114559 = DIRECTION('',(-1.,0.,0.)); +#114560 = ADVANCED_FACE('',(#114561),#114572,.T.); +#114561 = FACE_BOUND('',#114562,.T.); +#114562 = EDGE_LOOP('',(#114563,#114564,#114565,#114571)); +#114563 = ORIENTED_EDGE('',*,*,#114549,.T.); +#114564 = ORIENTED_EDGE('',*,*,#111071,.F.); +#114565 = ORIENTED_EDGE('',*,*,#114566,.F.); +#114566 = EDGE_CURVE('',#106948,#111064,#114567,.T.); +#114567 = LINE('',#114568,#114569); +#114568 = CARTESIAN_POINT('',(-6.575,3.174735981619,-1.285956425413)); +#114569 = VECTOR('',#114570,1.); +#114570 = DIRECTION('',(-1.,4.440892098501E-14,2.220446049251E-14)); +#114571 = ORIENTED_EDGE('',*,*,#106947,.T.); +#114572 = PLANE('',#114573); +#114573 = AXIS2_PLACEMENT_3D('',#114574,#114575,#114576); +#114574 = CARTESIAN_POINT('',(-6.575,3.174735981619,-1.285956425413)); +#114575 = DIRECTION('',(0.,0.605116141238,-0.796137209037)); +#114576 = DIRECTION('',(-1.,0.,0.)); +#114577 = ADVANCED_FACE('',(#114578),#114589,.T.); +#114578 = FACE_BOUND('',#114579,.T.); +#114579 = EDGE_LOOP('',(#114580,#114581,#114582,#114588)); +#114580 = ORIENTED_EDGE('',*,*,#114566,.T.); +#114581 = ORIENTED_EDGE('',*,*,#111063,.F.); +#114582 = ORIENTED_EDGE('',*,*,#114583,.F.); +#114583 = EDGE_CURVE('',#106956,#111056,#114584,.T.); +#114584 = LINE('',#114585,#114586); +#114585 = CARTESIAN_POINT('',(-6.575,3.203442887175,-1.280798168713)); +#114586 = VECTOR('',#114587,1.); +#114587 = DIRECTION('',(-1.,0.,0.)); +#114588 = ORIENTED_EDGE('',*,*,#106955,.T.); +#114589 = PLANE('',#114590); +#114590 = AXIS2_PLACEMENT_3D('',#114591,#114592,#114593); +#114591 = CARTESIAN_POINT('',(-6.575,3.203442887175,-1.280798168713)); +#114592 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114593 = DIRECTION('',(-1.,0.,0.)); +#114594 = ADVANCED_FACE('',(#114595),#114606,.T.); +#114595 = FACE_BOUND('',#114596,.T.); +#114596 = EDGE_LOOP('',(#114597,#114598,#114599,#114605)); +#114597 = ORIENTED_EDGE('',*,*,#114583,.T.); +#114598 = ORIENTED_EDGE('',*,*,#111055,.F.); +#114599 = ORIENTED_EDGE('',*,*,#114600,.F.); +#114600 = EDGE_CURVE('',#106964,#111048,#114601,.T.); +#114601 = LINE('',#114602,#114603); +#114602 = CARTESIAN_POINT('',(-6.575,3.234783806733,-1.290298757306)); +#114603 = VECTOR('',#114604,1.); +#114604 = DIRECTION('',(-1.,0.,0.)); +#114605 = ORIENTED_EDGE('',*,*,#106963,.T.); +#114606 = PLANE('',#114607); +#114607 = AXIS2_PLACEMENT_3D('',#114608,#114609,#114610); +#114608 = CARTESIAN_POINT('',(-6.575,3.234783806733,-1.290298757306)); +#114609 = DIRECTION('',(0.,-0.290100810147,-0.956996091921)); +#114610 = DIRECTION('',(0.,-0.956996091921,0.290100810147)); +#114611 = ADVANCED_FACE('',(#114612),#114623,.T.); +#114612 = FACE_BOUND('',#114613,.T.); +#114613 = EDGE_LOOP('',(#114614,#114615,#114616,#114622)); +#114614 = ORIENTED_EDGE('',*,*,#114600,.T.); +#114615 = ORIENTED_EDGE('',*,*,#111047,.F.); +#114616 = ORIENTED_EDGE('',*,*,#114617,.F.); +#114617 = EDGE_CURVE('',#106972,#111040,#114618,.T.); +#114618 = LINE('',#114619,#114620); +#114619 = CARTESIAN_POINT('',(-6.575,3.251771273513,-1.302378474249)); +#114620 = VECTOR('',#114621,1.); +#114621 = DIRECTION('',(-1.,0.,0.)); +#114622 = ORIENTED_EDGE('',*,*,#106971,.T.); +#114623 = PLANE('',#114624); +#114624 = AXIS2_PLACEMENT_3D('',#114625,#114626,#114627); +#114625 = CARTESIAN_POINT('',(-6.575,3.251771273513,-1.302378474249)); +#114626 = DIRECTION('',(0.,-0.5795155202,-0.814961202664)); +#114627 = DIRECTION('',(0.,-0.814961202664,0.5795155202)); +#114628 = ADVANCED_FACE('',(#114629),#114640,.T.); +#114629 = FACE_BOUND('',#114630,.T.); +#114630 = EDGE_LOOP('',(#114631,#114632,#114633,#114639)); +#114631 = ORIENTED_EDGE('',*,*,#114617,.T.); +#114632 = ORIENTED_EDGE('',*,*,#111039,.F.); +#114633 = ORIENTED_EDGE('',*,*,#114634,.F.); +#114634 = EDGE_CURVE('',#106980,#111032,#114635,.T.); +#114635 = LINE('',#114636,#114637); +#114636 = CARTESIAN_POINT('',(-6.575,3.271392733762,-1.329117040175)); +#114637 = VECTOR('',#114638,1.); +#114638 = DIRECTION('',(-1.,0.,0.)); +#114639 = ORIENTED_EDGE('',*,*,#106979,.T.); +#114640 = PLANE('',#114641); +#114641 = AXIS2_PLACEMENT_3D('',#114642,#114643,#114644); +#114642 = CARTESIAN_POINT('',(-6.575,3.271392733762,-1.329117040175)); +#114643 = DIRECTION('',(0.,-0.806215463215,-0.591622030416)); +#114644 = DIRECTION('',(0.,0.591622030416,-0.806215463215)); +#114645 = ADVANCED_FACE('',(#114646),#114657,.T.); +#114646 = FACE_BOUND('',#114647,.T.); +#114647 = EDGE_LOOP('',(#114648,#114649,#114650,#114656)); +#114648 = ORIENTED_EDGE('',*,*,#114634,.T.); +#114649 = ORIENTED_EDGE('',*,*,#111031,.F.); +#114650 = ORIENTED_EDGE('',*,*,#114651,.F.); +#114651 = EDGE_CURVE('',#106988,#111024,#114652,.T.); +#114652 = LINE('',#114653,#114654); +#114653 = CARTESIAN_POINT('',(-6.575,3.276660741233,-1.358434734451)); +#114654 = VECTOR('',#114655,1.); +#114655 = DIRECTION('',(-1.,0.,0.)); +#114656 = ORIENTED_EDGE('',*,*,#106987,.T.); +#114657 = PLANE('',#114658); +#114658 = AXIS2_PLACEMENT_3D('',#114659,#114660,#114661); +#114659 = CARTESIAN_POINT('',(-6.575,3.276660741233,-1.358434734451)); +#114660 = DIRECTION('',(0.,-0.98423699659,-0.176854557597)); +#114661 = DIRECTION('',(0.,0.176854557597,-0.98423699659)); +#114662 = ADVANCED_FACE('',(#114663),#114669,.T.); +#114663 = FACE_BOUND('',#114664,.T.); +#114664 = EDGE_LOOP('',(#114665,#114666,#114667,#114668)); +#114665 = ORIENTED_EDGE('',*,*,#114651,.T.); +#114666 = ORIENTED_EDGE('',*,*,#111021,.F.); +#114667 = ORIENTED_EDGE('',*,*,#114474,.F.); +#114668 = ORIENTED_EDGE('',*,*,#106995,.T.); +#114669 = PLANE('',#114670); +#114670 = AXIS2_PLACEMENT_3D('',#114671,#114672,#114673); +#114671 = CARTESIAN_POINT('',(-6.575,3.25848984773,-1.422228422613)); +#114672 = DIRECTION('',(0.,-0.961746141928,0.273942253926)); +#114673 = DIRECTION('',(-1.,0.,0.)); +#114674 = ADVANCED_FACE('',(#114675),#114686,.F.); +#114675 = FACE_BOUND('',#114676,.T.); +#114676 = EDGE_LOOP('',(#114677,#114683,#114684,#114685)); +#114677 = ORIENTED_EDGE('',*,*,#114678,.T.); +#114678 = EDGE_CURVE('',#107320,#106307,#114679,.T.); +#114679 = LINE('',#114680,#114681); +#114680 = CARTESIAN_POINT('',(-6.575,-1.6516,-4.7)); +#114681 = VECTOR('',#114682,1.); +#114682 = DIRECTION('',(1.,0.,0.)); +#114683 = ORIENTED_EDGE('',*,*,#106304,.F.); +#114684 = ORIENTED_EDGE('',*,*,#106634,.F.); +#114685 = ORIENTED_EDGE('',*,*,#107328,.T.); +#114686 = PLANE('',#114687); +#114687 = AXIS2_PLACEMENT_3D('',#114688,#114689,#114690); +#114688 = CARTESIAN_POINT('',(-6.575,-3.3,-4.7)); +#114689 = DIRECTION('',(0.,0.,1.)); +#114690 = DIRECTION('',(1.,0.,-0.)); +#114691 = ADVANCED_FACE('',(#114692),#114703,.F.); +#114692 = FACE_BOUND('',#114693,.F.); +#114693 = EDGE_LOOP('',(#114694,#114695,#114696,#114697)); +#114694 = ORIENTED_EDGE('',*,*,#107319,.F.); +#114695 = ORIENTED_EDGE('',*,*,#114678,.T.); +#114696 = ORIENTED_EDGE('',*,*,#106314,.T.); +#114697 = ORIENTED_EDGE('',*,*,#114698,.F.); +#114698 = EDGE_CURVE('',#107312,#106315,#114699,.T.); +#114699 = LINE('',#114700,#114701); +#114700 = CARTESIAN_POINT('',(-6.575,1.6516,-4.7)); +#114701 = VECTOR('',#114702,1.); +#114702 = DIRECTION('',(1.,0.,0.)); +#114703 = CYLINDRICAL_SURFACE('',#114704,1.6516); +#114704 = AXIS2_PLACEMENT_3D('',#114705,#114706,#114707); +#114705 = CARTESIAN_POINT('',(-6.575,0.,-4.7)); +#114706 = DIRECTION('',(-1.,0.,0.)); +#114707 = DIRECTION('',(0.,-1.,0.)); +#114708 = ADVANCED_FACE('',(#114709),#114720,.F.); +#114709 = FACE_BOUND('',#114710,.T.); +#114710 = EDGE_LOOP('',(#114711,#114717,#114718,#114719)); +#114711 = ORIENTED_EDGE('',*,*,#114712,.T.); +#114712 = EDGE_CURVE('',#107304,#106324,#114713,.T.); +#114713 = LINE('',#114714,#114715); +#114714 = CARTESIAN_POINT('',(-6.575,3.3,-4.7)); +#114715 = VECTOR('',#114716,1.); +#114716 = DIRECTION('',(1.,0.,0.)); +#114717 = ORIENTED_EDGE('',*,*,#106323,.F.); +#114718 = ORIENTED_EDGE('',*,*,#114698,.F.); +#114719 = ORIENTED_EDGE('',*,*,#107311,.T.); +#114720 = PLANE('',#114721); +#114721 = AXIS2_PLACEMENT_3D('',#114722,#114723,#114724); +#114722 = CARTESIAN_POINT('',(-6.575,1.6516,-4.7)); +#114723 = DIRECTION('',(0.,0.,1.)); +#114724 = DIRECTION('',(1.,0.,-0.)); +#114725 = ADVANCED_FACE('',(#114726),#114737,.F.); +#114726 = FACE_BOUND('',#114727,.T.); +#114727 = EDGE_LOOP('',(#114728,#114734,#114735,#114736)); +#114728 = ORIENTED_EDGE('',*,*,#114729,.F.); +#114729 = EDGE_CURVE('',#106332,#107296,#114730,.T.); +#114730 = LINE('',#114731,#114732); +#114731 = CARTESIAN_POINT('',(-6.075,3.3,-9.6)); +#114732 = VECTOR('',#114733,1.); +#114733 = DIRECTION('',(-1.,0.,0.)); +#114734 = ORIENTED_EDGE('',*,*,#106331,.F.); +#114735 = ORIENTED_EDGE('',*,*,#114712,.F.); +#114736 = ORIENTED_EDGE('',*,*,#107303,.T.); +#114737 = PLANE('',#114738); +#114738 = AXIS2_PLACEMENT_3D('',#114739,#114740,#114741); +#114739 = CARTESIAN_POINT('',(-6.575,3.3,-4.7)); +#114740 = DIRECTION('',(-0.,1.,0.)); +#114741 = DIRECTION('',(1.,0.,0.)); +#114742 = ADVANCED_FACE('',(#114743),#114754,.T.); +#114743 = FACE_BOUND('',#114744,.T.); +#114744 = EDGE_LOOP('',(#114745,#114746,#114752,#114753)); +#114745 = ORIENTED_EDGE('',*,*,#107295,.F.); +#114746 = ORIENTED_EDGE('',*,*,#114747,.T.); +#114747 = EDGE_CURVE('',#107288,#106340,#114748,.T.); +#114748 = LINE('',#114749,#114750); +#114749 = CARTESIAN_POINT('',(-6.575,4.5,-9.6)); +#114750 = VECTOR('',#114751,1.); +#114751 = DIRECTION('',(1.,0.,0.)); +#114752 = ORIENTED_EDGE('',*,*,#106339,.T.); +#114753 = ORIENTED_EDGE('',*,*,#114729,.T.); +#114754 = PLANE('',#114755); +#114755 = AXIS2_PLACEMENT_3D('',#114756,#114757,#114758); +#114756 = CARTESIAN_POINT('',(-6.575,4.5,-9.6)); +#114757 = DIRECTION('',(0.,0.,-1.)); +#114758 = DIRECTION('',(0.,-1.,0.)); +#114759 = ADVANCED_FACE('',(#114760),#114771,.F.); +#114760 = FACE_BOUND('',#114761,.T.); +#114761 = EDGE_LOOP('',(#114762,#114768,#114769,#114770)); +#114762 = ORIENTED_EDGE('',*,*,#114763,.T.); +#114763 = EDGE_CURVE('',#107279,#106348,#114764,.T.); +#114764 = LINE('',#114765,#114766); +#114765 = CARTESIAN_POINT('',(-6.575,4.5,-13.00523257219)); +#114766 = VECTOR('',#114767,1.); +#114767 = DIRECTION('',(1.,0.,0.)); +#114768 = ORIENTED_EDGE('',*,*,#106347,.F.); +#114769 = ORIENTED_EDGE('',*,*,#114747,.F.); +#114770 = ORIENTED_EDGE('',*,*,#107287,.F.); +#114771 = PLANE('',#114772); +#114772 = AXIS2_PLACEMENT_3D('',#114773,#114774,#114775); +#114773 = CARTESIAN_POINT('',(-6.575,4.5,-11.2)); +#114774 = DIRECTION('',(-0.,1.,0.)); +#114775 = DIRECTION('',(1.,0.,0.)); +#114776 = ADVANCED_FACE('',(#114777),#114788,.T.); +#114777 = FACE_BOUND('',#114778,.T.); +#114778 = EDGE_LOOP('',(#114779,#114785,#114786,#114787)); +#114779 = ORIENTED_EDGE('',*,*,#114780,.T.); +#114780 = EDGE_CURVE('',#107271,#106356,#114781,.T.); +#114781 = LINE('',#114782,#114783); +#114782 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.3)); +#114783 = VECTOR('',#114784,1.); +#114784 = DIRECTION('',(1.,0.,0.)); +#114785 = ORIENTED_EDGE('',*,*,#106355,.F.); +#114786 = ORIENTED_EDGE('',*,*,#114763,.F.); +#114787 = ORIENTED_EDGE('',*,*,#107278,.T.); +#114788 = CYLINDRICAL_SURFACE('',#114789,0.294767427805); +#114789 = AXIS2_PLACEMENT_3D('',#114790,#114791,#114792); +#114790 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.00523257219)); +#114791 = DIRECTION('',(1.,0.,0.)); +#114792 = DIRECTION('',(0.,0.,-1.)); +#114793 = ADVANCED_FACE('',(#114794),#114805,.F.); +#114794 = FACE_BOUND('',#114795,.T.); +#114795 = EDGE_LOOP('',(#114796,#114802,#114803,#114804)); +#114796 = ORIENTED_EDGE('',*,*,#114797,.T.); +#114797 = EDGE_CURVE('',#107262,#106365,#114798,.T.); +#114798 = LINE('',#114799,#114800); +#114799 = CARTESIAN_POINT('',(-6.575,5.205232572195,-13.3)); +#114800 = VECTOR('',#114801,1.); +#114801 = DIRECTION('',(1.,0.,0.)); +#114802 = ORIENTED_EDGE('',*,*,#106364,.F.); +#114803 = ORIENTED_EDGE('',*,*,#114780,.F.); +#114804 = ORIENTED_EDGE('',*,*,#107270,.T.); +#114805 = PLANE('',#114806); +#114806 = AXIS2_PLACEMENT_3D('',#114807,#114808,#114809); +#114807 = CARTESIAN_POINT('',(-6.575,4.794767427805,-13.3)); +#114808 = DIRECTION('',(0.,0.,1.)); +#114809 = DIRECTION('',(1.,0.,-0.)); +#114810 = ADVANCED_FACE('',(#114811),#114822,.T.); +#114811 = FACE_BOUND('',#114812,.T.); +#114812 = EDGE_LOOP('',(#114813,#114819,#114820,#114821)); +#114813 = ORIENTED_EDGE('',*,*,#114814,.T.); +#114814 = EDGE_CURVE('',#107254,#106373,#114815,.T.); +#114815 = LINE('',#114816,#114817); +#114816 = CARTESIAN_POINT('',(-6.575,5.5,-13.00523257219)); +#114817 = VECTOR('',#114818,1.); +#114818 = DIRECTION('',(1.,0.,0.)); +#114819 = ORIENTED_EDGE('',*,*,#106372,.F.); +#114820 = ORIENTED_EDGE('',*,*,#114797,.F.); +#114821 = ORIENTED_EDGE('',*,*,#107261,.T.); +#114822 = CYLINDRICAL_SURFACE('',#114823,0.294767427805); +#114823 = AXIS2_PLACEMENT_3D('',#114824,#114825,#114826); +#114824 = CARTESIAN_POINT('',(-6.575,5.205232572195,-13.00523257219)); +#114825 = DIRECTION('',(1.,0.,0.)); +#114826 = DIRECTION('',(0.,0.,-1.)); +#114827 = ADVANCED_FACE('',(#114828),#114839,.F.); +#114828 = FACE_BOUND('',#114829,.T.); +#114829 = EDGE_LOOP('',(#114830,#114836,#114837,#114838)); +#114830 = ORIENTED_EDGE('',*,*,#114831,.F.); +#114831 = EDGE_CURVE('',#106382,#107246,#114832,.T.); +#114832 = LINE('',#114833,#114834); +#114833 = CARTESIAN_POINT('',(-6.075,5.5,-11.2)); +#114834 = VECTOR('',#114835,1.); +#114835 = DIRECTION('',(-1.,0.,0.)); +#114836 = ORIENTED_EDGE('',*,*,#106381,.F.); +#114837 = ORIENTED_EDGE('',*,*,#114814,.F.); +#114838 = ORIENTED_EDGE('',*,*,#107253,.T.); +#114839 = PLANE('',#114840); +#114840 = AXIS2_PLACEMENT_3D('',#114841,#114842,#114843); +#114841 = CARTESIAN_POINT('',(-6.575,5.5,-13.00523257219)); +#114842 = DIRECTION('',(0.,-1.,0.)); +#114843 = DIRECTION('',(0.,0.,-1.)); +#114844 = ADVANCED_FACE('',(#114845),#114856,.F.); +#114845 = FACE_BOUND('',#114846,.T.); +#114846 = EDGE_LOOP('',(#114847,#114848,#114854,#114855)); +#114847 = ORIENTED_EDGE('',*,*,#107245,.T.); +#114848 = ORIENTED_EDGE('',*,*,#114849,.T.); +#114849 = EDGE_CURVE('',#107238,#106390,#114850,.T.); +#114850 = LINE('',#114851,#114852); +#114851 = CARTESIAN_POINT('',(-6.575,5.975,-11.2)); +#114852 = VECTOR('',#114853,1.); +#114853 = DIRECTION('',(1.,0.,0.)); +#114854 = ORIENTED_EDGE('',*,*,#106389,.F.); +#114855 = ORIENTED_EDGE('',*,*,#114831,.T.); +#114856 = PLANE('',#114857); +#114857 = AXIS2_PLACEMENT_3D('',#114858,#114859,#114860); +#114858 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#114859 = DIRECTION('',(0.,0.,1.)); +#114860 = DIRECTION('',(1.,0.,-0.)); +#114861 = ADVANCED_FACE('',(#114862),#114878,.F.); +#114862 = FACE_BOUND('',#114863,.T.); +#114863 = EDGE_LOOP('',(#114864,#114865,#114871,#114872)); +#114864 = ORIENTED_EDGE('',*,*,#106562,.F.); +#114865 = ORIENTED_EDGE('',*,*,#114866,.F.); +#114866 = EDGE_CURVE('',#107068,#106555,#114867,.T.); +#114867 = LINE('',#114868,#114869); +#114868 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#114869 = VECTOR('',#114870,1.); +#114870 = DIRECTION('',(1.,0.,0.)); +#114871 = ORIENTED_EDGE('',*,*,#107067,.T.); +#114872 = ORIENTED_EDGE('',*,*,#114873,.F.); +#114873 = EDGE_CURVE('',#106563,#107060,#114874,.T.); +#114874 = LINE('',#114875,#114876); +#114875 = CARTESIAN_POINT('',(-6.075,-5.5,-11.2)); +#114876 = VECTOR('',#114877,1.); +#114877 = DIRECTION('',(-1.,0.,0.)); +#114878 = PLANE('',#114879); +#114879 = AXIS2_PLACEMENT_3D('',#114880,#114881,#114882); +#114880 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#114881 = DIRECTION('',(0.,0.,1.)); +#114882 = DIRECTION('',(1.,0.,-0.)); +#114883 = ADVANCED_FACE('',(#114884),#114895,.F.); +#114884 = FACE_BOUND('',#114885,.T.); +#114885 = EDGE_LOOP('',(#114886,#114892,#114893,#114894)); +#114886 = ORIENTED_EDGE('',*,*,#114887,.T.); +#114887 = EDGE_CURVE('',#107230,#106398,#114888,.T.); +#114888 = LINE('',#114889,#114890); +#114889 = CARTESIAN_POINT('',(-6.575,5.975,-5.7)); +#114890 = VECTOR('',#114891,1.); +#114891 = DIRECTION('',(1.,0.,0.)); +#114892 = ORIENTED_EDGE('',*,*,#106397,.F.); +#114893 = ORIENTED_EDGE('',*,*,#114849,.F.); +#114894 = ORIENTED_EDGE('',*,*,#107237,.T.); +#114895 = PLANE('',#114896); +#114896 = AXIS2_PLACEMENT_3D('',#114897,#114898,#114899); +#114897 = CARTESIAN_POINT('',(-6.575,5.975,-11.2)); +#114898 = DIRECTION('',(0.,-1.,0.)); +#114899 = DIRECTION('',(0.,0.,-1.)); +#114900 = ADVANCED_FACE('',(#114901),#114912,.F.); +#114901 = FACE_BOUND('',#114902,.T.); +#114902 = EDGE_LOOP('',(#114903,#114909,#114910,#114911)); +#114903 = ORIENTED_EDGE('',*,*,#114904,.T.); +#114904 = EDGE_CURVE('',#107222,#106406,#114905,.T.); +#114905 = LINE('',#114906,#114907); +#114906 = CARTESIAN_POINT('',(-6.575,6.575,-5.7)); +#114907 = VECTOR('',#114908,1.); +#114908 = DIRECTION('',(1.,0.,0.)); +#114909 = ORIENTED_EDGE('',*,*,#106405,.F.); +#114910 = ORIENTED_EDGE('',*,*,#114887,.F.); +#114911 = ORIENTED_EDGE('',*,*,#107229,.T.); +#114912 = PLANE('',#114913); +#114913 = AXIS2_PLACEMENT_3D('',#114914,#114915,#114916); +#114914 = CARTESIAN_POINT('',(-6.575,5.975,-5.7)); +#114915 = DIRECTION('',(0.,0.,1.)); +#114916 = DIRECTION('',(1.,0.,-0.)); +#114917 = ADVANCED_FACE('',(#114918),#114929,.F.); +#114918 = FACE_BOUND('',#114919,.T.); +#114919 = EDGE_LOOP('',(#114920,#114926,#114927,#114928)); +#114920 = ORIENTED_EDGE('',*,*,#114921,.T.); +#114921 = EDGE_CURVE('',#107214,#106414,#114922,.T.); +#114922 = LINE('',#114923,#114924); +#114923 = CARTESIAN_POINT('',(-6.575,6.575,-1.2)); +#114924 = VECTOR('',#114925,1.); +#114925 = DIRECTION('',(1.,0.,0.)); +#114926 = ORIENTED_EDGE('',*,*,#106413,.F.); +#114927 = ORIENTED_EDGE('',*,*,#114904,.F.); +#114928 = ORIENTED_EDGE('',*,*,#107221,.T.); +#114929 = PLANE('',#114930); +#114930 = AXIS2_PLACEMENT_3D('',#114931,#114932,#114933); +#114931 = CARTESIAN_POINT('',(-6.575,6.575,-5.7)); +#114932 = DIRECTION('',(0.,-1.,0.)); +#114933 = DIRECTION('',(0.,0.,-1.)); +#114934 = ADVANCED_FACE('',(#114935),#114946,.F.); +#114935 = FACE_BOUND('',#114936,.T.); +#114936 = EDGE_LOOP('',(#114937,#114938,#114939,#114940)); +#114937 = ORIENTED_EDGE('',*,*,#106421,.F.); +#114938 = ORIENTED_EDGE('',*,*,#114921,.F.); +#114939 = ORIENTED_EDGE('',*,*,#107213,.T.); +#114940 = ORIENTED_EDGE('',*,*,#114941,.T.); +#114941 = EDGE_CURVE('',#107205,#106422,#114942,.T.); +#114942 = LINE('',#114943,#114944); +#114943 = CARTESIAN_POINT('',(-6.575,5.707414107351,-0.419172696616)); +#114944 = VECTOR('',#114945,1.); +#114945 = DIRECTION('',(1.,0.,0.)); +#114946 = PLANE('',#114947); +#114947 = AXIS2_PLACEMENT_3D('',#114948,#114949,#114950); +#114948 = CARTESIAN_POINT('',(-6.575,6.575,-1.2)); +#114949 = DIRECTION('',(0.,-0.668964731622,-0.743294146247)); +#114950 = DIRECTION('',(0.,-0.743294146247,0.668964731622)); +#114951 = ADVANCED_FACE('',(#114952),#114963,.F.); +#114952 = FACE_BOUND('',#114953,.F.); +#114953 = EDGE_LOOP('',(#114954,#114960,#114961,#114962)); +#114954 = ORIENTED_EDGE('',*,*,#114955,.F.); +#114955 = EDGE_CURVE('',#107197,#106430,#114956,.T.); +#114956 = LINE('',#114957,#114958); +#114957 = CARTESIAN_POINT('',(-6.575,5.575,-0.121855038117)); +#114958 = VECTOR('',#114959,1.); +#114959 = DIRECTION('',(1.,0.,0.)); +#114960 = ORIENTED_EDGE('',*,*,#107204,.T.); +#114961 = ORIENTED_EDGE('',*,*,#114941,.T.); +#114962 = ORIENTED_EDGE('',*,*,#106429,.T.); +#114963 = CYLINDRICAL_SURFACE('',#114964,0.4); +#114964 = AXIS2_PLACEMENT_3D('',#114965,#114966,#114967); +#114965 = CARTESIAN_POINT('',(-23.740376,5.975,-0.121855038117)); +#114966 = DIRECTION('',(1.,0.,0.)); +#114967 = DIRECTION('',(0.,-1.,0.)); +#114968 = ADVANCED_FACE('',(#114969),#114975,.F.); +#114969 = FACE_BOUND('',#114970,.T.); +#114970 = EDGE_LOOP('',(#114971,#114972,#114973,#114974)); +#114971 = ORIENTED_EDGE('',*,*,#107196,.T.); +#114972 = ORIENTED_EDGE('',*,*,#104821,.T.); +#114973 = ORIENTED_EDGE('',*,*,#106438,.F.); +#114974 = ORIENTED_EDGE('',*,*,#114955,.F.); +#114975 = PLANE('',#114976); +#114976 = AXIS2_PLACEMENT_3D('',#114977,#114978,#114979); +#114977 = CARTESIAN_POINT('',(-6.575,5.575,-0.3)); +#114978 = DIRECTION('',(0.,-1.,0.)); +#114979 = DIRECTION('',(0.,0.,-1.)); +#114980 = ADVANCED_FACE('',(#114981),#114992,.F.); +#114981 = FACE_BOUND('',#114982,.T.); +#114982 = EDGE_LOOP('',(#114983,#114989,#114990,#114991)); +#114983 = ORIENTED_EDGE('',*,*,#114984,.T.); +#114984 = EDGE_CURVE('',#107051,#106571,#114985,.T.); +#114985 = LINE('',#114986,#114987); +#114986 = CARTESIAN_POINT('',(-6.575,-5.5,-13.00523257219)); +#114987 = VECTOR('',#114988,1.); +#114988 = DIRECTION('',(1.,0.,0.)); +#114989 = ORIENTED_EDGE('',*,*,#106570,.F.); +#114990 = ORIENTED_EDGE('',*,*,#114873,.T.); +#114991 = ORIENTED_EDGE('',*,*,#107059,.T.); +#114992 = PLANE('',#114993); +#114993 = AXIS2_PLACEMENT_3D('',#114994,#114995,#114996); +#114994 = CARTESIAN_POINT('',(-6.575,-5.5,-11.2)); +#114995 = DIRECTION('',(-0.,1.,0.)); +#114996 = DIRECTION('',(1.,0.,0.)); +#114997 = ADVANCED_FACE('',(#114998),#115009,.T.); +#114998 = FACE_BOUND('',#114999,.T.); +#114999 = EDGE_LOOP('',(#115000,#115006,#115007,#115008)); +#115000 = ORIENTED_EDGE('',*,*,#115001,.T.); +#115001 = EDGE_CURVE('',#107043,#106579,#115002,.T.); +#115002 = LINE('',#115003,#115004); +#115003 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.3)); +#115004 = VECTOR('',#115005,1.); +#115005 = DIRECTION('',(1.,0.,0.)); +#115006 = ORIENTED_EDGE('',*,*,#106578,.F.); +#115007 = ORIENTED_EDGE('',*,*,#114984,.F.); +#115008 = ORIENTED_EDGE('',*,*,#107050,.T.); +#115009 = CYLINDRICAL_SURFACE('',#115010,0.294767427805); +#115010 = AXIS2_PLACEMENT_3D('',#115011,#115012,#115013); +#115011 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.00523257219)); +#115012 = DIRECTION('',(1.,0.,0.)); +#115013 = DIRECTION('',(0.,0.,-1.)); +#115014 = ADVANCED_FACE('',(#115015),#115026,.F.); +#115015 = FACE_BOUND('',#115016,.T.); +#115016 = EDGE_LOOP('',(#115017,#115023,#115024,#115025)); +#115017 = ORIENTED_EDGE('',*,*,#115018,.T.); +#115018 = EDGE_CURVE('',#107034,#106588,#115019,.T.); +#115019 = LINE('',#115020,#115021); +#115020 = CARTESIAN_POINT('',(-6.575,-4.794767427805,-13.3)); +#115021 = VECTOR('',#115022,1.); +#115022 = DIRECTION('',(1.,0.,0.)); +#115023 = ORIENTED_EDGE('',*,*,#106587,.F.); +#115024 = ORIENTED_EDGE('',*,*,#115001,.F.); +#115025 = ORIENTED_EDGE('',*,*,#107042,.T.); +#115026 = PLANE('',#115027); +#115027 = AXIS2_PLACEMENT_3D('',#115028,#115029,#115030); +#115028 = CARTESIAN_POINT('',(-6.575,-5.205232572195,-13.3)); +#115029 = DIRECTION('',(0.,0.,1.)); +#115030 = DIRECTION('',(1.,0.,-0.)); +#115031 = ADVANCED_FACE('',(#115032),#115043,.T.); +#115032 = FACE_BOUND('',#115033,.T.); +#115033 = EDGE_LOOP('',(#115034,#115040,#115041,#115042)); +#115034 = ORIENTED_EDGE('',*,*,#115035,.T.); +#115035 = EDGE_CURVE('',#107026,#106596,#115036,.T.); +#115036 = LINE('',#115037,#115038); +#115037 = CARTESIAN_POINT('',(-6.575,-4.5,-13.00523257219)); +#115038 = VECTOR('',#115039,1.); +#115039 = DIRECTION('',(1.,0.,0.)); +#115040 = ORIENTED_EDGE('',*,*,#106595,.F.); +#115041 = ORIENTED_EDGE('',*,*,#115018,.F.); +#115042 = ORIENTED_EDGE('',*,*,#107033,.T.); +#115043 = CYLINDRICAL_SURFACE('',#115044,0.294767427805); +#115044 = AXIS2_PLACEMENT_3D('',#115045,#115046,#115047); +#115045 = CARTESIAN_POINT('',(-6.575,-4.794767427805,-13.00523257219)); +#115046 = DIRECTION('',(1.,0.,0.)); +#115047 = DIRECTION('',(0.,0.,-1.)); +#115048 = ADVANCED_FACE('',(#115049),#115060,.F.); +#115049 = FACE_BOUND('',#115050,.T.); +#115050 = EDGE_LOOP('',(#115051,#115052,#115053,#115059)); +#115051 = ORIENTED_EDGE('',*,*,#115035,.F.); +#115052 = ORIENTED_EDGE('',*,*,#107025,.F.); +#115053 = ORIENTED_EDGE('',*,*,#115054,.T.); +#115054 = EDGE_CURVE('',#107018,#106605,#115055,.T.); +#115055 = LINE('',#115056,#115057); +#115056 = CARTESIAN_POINT('',(-6.575,-4.5,-9.6)); +#115057 = VECTOR('',#115058,1.); +#115058 = DIRECTION('',(1.,0.,0.)); +#115059 = ORIENTED_EDGE('',*,*,#106604,.F.); +#115060 = PLANE('',#115061); +#115061 = AXIS2_PLACEMENT_3D('',#115062,#115063,#115064); +#115062 = CARTESIAN_POINT('',(-6.575,-4.5,-13.00523257219)); +#115063 = DIRECTION('',(0.,-1.,0.)); +#115064 = DIRECTION('',(0.,0.,-1.)); +#115065 = ADVANCED_FACE('',(#115066),#115072,.T.); +#115066 = FACE_BOUND('',#115067,.T.); +#115067 = EDGE_LOOP('',(#115068,#115069,#115070,#115071)); +#115068 = ORIENTED_EDGE('',*,*,#106612,.T.); +#115069 = ORIENTED_EDGE('',*,*,#115054,.F.); +#115070 = ORIENTED_EDGE('',*,*,#107017,.F.); +#115071 = ORIENTED_EDGE('',*,*,#106643,.F.); +#115072 = PLANE('',#115073); +#115073 = AXIS2_PLACEMENT_3D('',#115074,#115075,#115076); +#115074 = CARTESIAN_POINT('',(-6.575,-3.3,-9.6)); +#115075 = DIRECTION('',(0.,0.,-1.)); +#115076 = DIRECTION('',(0.,-1.,0.)); +#115077 = ADVANCED_FACE('',(#115078),#115089,.F.); +#115078 = FACE_BOUND('',#115079,.T.); +#115079 = EDGE_LOOP('',(#115080,#115081,#115082,#115088)); +#115080 = ORIENTED_EDGE('',*,*,#114866,.T.); +#115081 = ORIENTED_EDGE('',*,*,#106554,.F.); +#115082 = ORIENTED_EDGE('',*,*,#115083,.F.); +#115083 = EDGE_CURVE('',#107076,#106547,#115084,.T.); +#115084 = LINE('',#115085,#115086); +#115085 = CARTESIAN_POINT('',(-6.575,-5.975,-5.7)); +#115086 = VECTOR('',#115087,1.); +#115087 = DIRECTION('',(1.,0.,0.)); +#115088 = ORIENTED_EDGE('',*,*,#107075,.T.); +#115089 = PLANE('',#115090); +#115090 = AXIS2_PLACEMENT_3D('',#115091,#115092,#115093); +#115091 = CARTESIAN_POINT('',(-6.575,-5.975,-5.7)); +#115092 = DIRECTION('',(-0.,1.,0.)); +#115093 = DIRECTION('',(1.,0.,0.)); +#115094 = ADVANCED_FACE('',(#115095),#115106,.F.); +#115095 = FACE_BOUND('',#115096,.T.); +#115096 = EDGE_LOOP('',(#115097,#115098,#115099,#115105)); +#115097 = ORIENTED_EDGE('',*,*,#115083,.T.); +#115098 = ORIENTED_EDGE('',*,*,#106546,.F.); +#115099 = ORIENTED_EDGE('',*,*,#115100,.F.); +#115100 = EDGE_CURVE('',#107084,#106539,#115101,.T.); +#115101 = LINE('',#115102,#115103); +#115102 = CARTESIAN_POINT('',(-6.575,-6.575,-5.7)); +#115103 = VECTOR('',#115104,1.); +#115104 = DIRECTION('',(1.,0.,0.)); +#115105 = ORIENTED_EDGE('',*,*,#107083,.T.); +#115106 = PLANE('',#115107); +#115107 = AXIS2_PLACEMENT_3D('',#115108,#115109,#115110); +#115108 = CARTESIAN_POINT('',(-6.575,-6.575,-5.7)); +#115109 = DIRECTION('',(0.,0.,1.)); +#115110 = DIRECTION('',(1.,0.,-0.)); +#115111 = ADVANCED_FACE('',(#115112),#115123,.F.); +#115112 = FACE_BOUND('',#115113,.T.); +#115113 = EDGE_LOOP('',(#115114,#115115,#115116,#115122)); +#115114 = ORIENTED_EDGE('',*,*,#115100,.T.); +#115115 = ORIENTED_EDGE('',*,*,#106538,.F.); +#115116 = ORIENTED_EDGE('',*,*,#115117,.F.); +#115117 = EDGE_CURVE('',#107092,#106531,#115118,.T.); +#115118 = LINE('',#115119,#115120); +#115119 = CARTESIAN_POINT('',(-6.575,-6.575,-1.2)); +#115120 = VECTOR('',#115121,1.); +#115121 = DIRECTION('',(1.,0.,0.)); +#115122 = ORIENTED_EDGE('',*,*,#107091,.T.); +#115123 = PLANE('',#115124); +#115124 = AXIS2_PLACEMENT_3D('',#115125,#115126,#115127); +#115125 = CARTESIAN_POINT('',(-6.575,-6.575,-1.2)); +#115126 = DIRECTION('',(-0.,1.,0.)); +#115127 = DIRECTION('',(1.,0.,0.)); +#115128 = ADVANCED_FACE('',(#115129),#115140,.F.); +#115129 = FACE_BOUND('',#115130,.T.); +#115130 = EDGE_LOOP('',(#115131,#115132,#115133,#115134)); +#115131 = ORIENTED_EDGE('',*,*,#107099,.T.); +#115132 = ORIENTED_EDGE('',*,*,#115117,.T.); +#115133 = ORIENTED_EDGE('',*,*,#106530,.F.); +#115134 = ORIENTED_EDGE('',*,*,#115135,.F.); +#115135 = EDGE_CURVE('',#107100,#106522,#115136,.T.); +#115136 = LINE('',#115137,#115138); +#115137 = CARTESIAN_POINT('',(-6.575,-5.707414107351,-0.419172696616)); +#115138 = VECTOR('',#115139,1.); +#115139 = DIRECTION('',(1.,0.,0.)); +#115140 = PLANE('',#115141); +#115141 = AXIS2_PLACEMENT_3D('',#115142,#115143,#115144); +#115142 = CARTESIAN_POINT('',(-6.575,-5.575,-0.3)); +#115143 = DIRECTION('',(0.,0.668964731622,-0.743294146247)); +#115144 = DIRECTION('',(-1.,0.,0.)); +#115145 = ADVANCED_FACE('',(#115146),#115157,.F.); +#115146 = FACE_BOUND('',#115147,.F.); +#115147 = EDGE_LOOP('',(#115148,#115149,#115150,#115156)); +#115148 = ORIENTED_EDGE('',*,*,#115135,.F.); +#115149 = ORIENTED_EDGE('',*,*,#107107,.T.); +#115150 = ORIENTED_EDGE('',*,*,#115151,.T.); +#115151 = EDGE_CURVE('',#107108,#106514,#115152,.T.); +#115152 = LINE('',#115153,#115154); +#115153 = CARTESIAN_POINT('',(-6.575,-5.575,-0.121855038117)); +#115154 = VECTOR('',#115155,1.); +#115155 = DIRECTION('',(1.,0.,0.)); +#115156 = ORIENTED_EDGE('',*,*,#106521,.T.); +#115157 = CYLINDRICAL_SURFACE('',#115158,0.4); +#115158 = AXIS2_PLACEMENT_3D('',#115159,#115160,#115161); +#115159 = CARTESIAN_POINT('',(-23.740376,-5.975,-0.121855038117)); +#115160 = DIRECTION('',(1.,0.,0.)); +#115161 = DIRECTION('',(0.,0.668964731622,-0.743294146247)); +#115162 = ADVANCED_FACE('',(#115163),#115169,.F.); +#115163 = FACE_BOUND('',#115164,.T.); +#115164 = EDGE_LOOP('',(#115165,#115166,#115167,#115168)); +#115165 = ORIENTED_EDGE('',*,*,#106513,.F.); +#115166 = ORIENTED_EDGE('',*,*,#105237,.F.); +#115167 = ORIENTED_EDGE('',*,*,#107116,.T.); +#115168 = ORIENTED_EDGE('',*,*,#115151,.T.); +#115169 = PLANE('',#115170); +#115170 = AXIS2_PLACEMENT_3D('',#115171,#115172,#115173); +#115171 = CARTESIAN_POINT('',(-6.575,-5.575,0.5)); +#115172 = DIRECTION('',(-0.,1.,0.)); +#115173 = DIRECTION('',(1.,0.,0.)); +#115174 = ADVANCED_FACE('',(#115175),#115207,.T.); +#115175 = FACE_BOUND('',#115176,.T.); +#115176 = EDGE_LOOP('',(#115177,#115178,#115197,#115198,#115206)); +#115177 = ORIENTED_EDGE('',*,*,#105904,.F.); +#115178 = ORIENTED_EDGE('',*,*,#115179,.F.); +#115179 = EDGE_CURVE('',#104822,#105896,#115180,.T.); +#115180 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115181,#115182,#115183, + #115184,#115185,#115186,#115187,#115188,#115189,#115190,#115191, + #115192,#115193,#115194,#115195,#115196),.UNSPECIFIED.,.F.,.F.,(4,2, + 2,2,2,2,2,4),(0.,0.125,0.1875,0.25,0.5,0.625,0.75,1.), + .UNSPECIFIED.); +#115181 = CARTESIAN_POINT('',(-6.575,5.575,0.)); +#115182 = CARTESIAN_POINT('',(-6.574796801379,5.575,3.770355152088E-02) + ); +#115183 = CARTESIAN_POINT('',(-6.570729105599,5.57497766524, + 7.429352236955E-02)); +#115184 = CARTESIAN_POINT('',(-6.558832564932,5.575122836703, + 0.127508107634)); +#115185 = CARTESIAN_POINT('',(-6.553901235993,5.575205207284, + 0.144967907554)); +#115186 = CARTESIAN_POINT('',(-6.542109707539,5.575523630071, + 0.179330717059)); +#115187 = CARTESIAN_POINT('',(-6.53447576199,5.575796534167, + 0.197878188092)); +#115188 = CARTESIAN_POINT('',(-6.499238231016,5.577474745007, + 0.272778952926)); +#115189 = CARTESIAN_POINT('',(-6.461862265275,5.580190560642, + 0.323752773972)); +#115190 = CARTESIAN_POINT('',(-6.388656395926,5.592204215956, + 0.390719521771)); +#115191 = CARTESIAN_POINT('',(-6.362715377702,5.597387131599, + 0.410225847999)); +#115192 = CARTESIAN_POINT('',(-6.308080895815,5.610870406455, + 0.443606654376)); +#115193 = CARTESIAN_POINT('',(-6.277843946204,5.61970259012, + 0.458052922183)); +#115194 = CARTESIAN_POINT('',(-6.192986640334,5.648908622455, + 0.489513230546)); +#115195 = CARTESIAN_POINT('',(-6.134107453287,5.674848892149,0.5)); +#115196 = CARTESIAN_POINT('',(-6.075,5.708974596216,0.5)); +#115197 = ORIENTED_EDGE('',*,*,#107190,.T.); +#115198 = ORIENTED_EDGE('',*,*,#115199,.T.); +#115199 = EDGE_CURVE('',#107182,#106272,#115200,.T.); +#115200 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115201,#115202,#115203, + #115204,#115205),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115201 = CARTESIAN_POINT('',(-6.575,4.291421356237,0.)); +#115202 = CARTESIAN_POINT('',(-6.575,4.294254978462,8.014693962439E-03) + ); +#115203 = CARTESIAN_POINT('',(-6.574611284412,4.29855458162, + 2.452188107117E-02)); +#115204 = CARTESIAN_POINT('',(-6.573347042135,4.3,4.150953756753E-02)); +#115205 = CARTESIAN_POINT('',(-6.572493718553,4.3,5.E-02)); +#115206 = ORIENTED_EDGE('',*,*,#106271,.F.); +#115207 = CYLINDRICAL_SURFACE('',#115208,0.5); +#115208 = AXIS2_PLACEMENT_3D('',#115209,#115210,#115211); +#115209 = CARTESIAN_POINT('',(-6.075,23.71734,0.)); +#115210 = DIRECTION('',(0.,-1.,0.)); +#115211 = DIRECTION('',(0.,0.,1.)); +#115212 = ADVANCED_FACE('',(#115213),#115243,.T.); +#115213 = FACE_BOUND('',#115214,.T.); +#115214 = EDGE_LOOP('',(#115215,#115225,#115232,#115233,#115234,#115242) + ); +#115215 = ORIENTED_EDGE('',*,*,#115216,.T.); +#115216 = EDGE_CURVE('',#107148,#115217,#115219,.T.); +#115217 = VERTEX_POINT('',#115218); +#115218 = CARTESIAN_POINT('',(-6.572493718553,-2.8,5.E-02)); +#115219 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115220,#115221,#115222, + #115223,#115224),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115220 = CARTESIAN_POINT('',(-6.575,-2.808578643763,0.)); +#115221 = CARTESIAN_POINT('',(-6.575,-2.805745021538,8.014693962438E-03) + ); +#115222 = CARTESIAN_POINT('',(-6.574611284412,-2.80144541838, + 2.452188107117E-02)); +#115223 = CARTESIAN_POINT('',(-6.573347042135,-2.8,4.150953756753E-02)); +#115224 = CARTESIAN_POINT('',(-6.572493718553,-2.8,5.E-02)); +#115225 = ORIENTED_EDGE('',*,*,#115226,.F.); +#115226 = EDGE_CURVE('',#105487,#115217,#115227,.T.); +#115227 = CIRCLE('',#115228,0.5); +#115228 = AXIS2_PLACEMENT_3D('',#115229,#115230,#115231); +#115229 = CARTESIAN_POINT('',(-6.075,-2.8,0.)); +#115230 = DIRECTION('',(0.,-1.,0.)); +#115231 = DIRECTION('',(0.,0.,1.)); +#115232 = ORIENTED_EDGE('',*,*,#105484,.F.); +#115233 = ORIENTED_EDGE('',*,*,#106197,.T.); +#115234 = ORIENTED_EDGE('',*,*,#115235,.T.); +#115235 = EDGE_CURVE('',#106190,#107157,#115236,.T.); +#115236 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115237,#115238,#115239, + #115240,#115241),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115237 = CARTESIAN_POINT('',(-6.572493718553,2.8,5.E-02)); +#115238 = CARTESIAN_POINT('',(-6.573347042135,2.8,4.150953756753E-02)); +#115239 = CARTESIAN_POINT('',(-6.574611284412,2.80144541838, + 2.452188107117E-02)); +#115240 = CARTESIAN_POINT('',(-6.575,2.805745021538,8.014693962439E-03) + ); +#115241 = CARTESIAN_POINT('',(-6.575,2.808578643763,0.)); +#115242 = ORIENTED_EDGE('',*,*,#107156,.T.); +#115243 = CYLINDRICAL_SURFACE('',#115244,0.5); +#115244 = AXIS2_PLACEMENT_3D('',#115245,#115246,#115247); +#115245 = CARTESIAN_POINT('',(-6.075,23.71734,0.)); +#115246 = DIRECTION('',(0.,-1.,0.)); +#115247 = DIRECTION('',(0.,0.,1.)); +#115248 = ADVANCED_FACE('',(#115249),#115289,.T.); +#115249 = FACE_BOUND('',#115250,.T.); +#115250 = EDGE_LOOP('',(#115251,#115270,#115271,#115280,#115288)); +#115251 = ORIENTED_EDGE('',*,*,#115252,.F.); +#115252 = EDGE_CURVE('',#105537,#105229,#115253,.T.); +#115253 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115254,#115255,#115256, + #115257,#115258,#115259,#115260,#115261,#115262,#115263,#115264, + #115265,#115266,#115267,#115268,#115269),.UNSPECIFIED.,.F.,.F.,(4,2, + 2,2,2,2,2,4),(0.,0.125,0.25,0.5,0.625,0.6875,0.75,1.), + .UNSPECIFIED.); +#115254 = CARTESIAN_POINT('',(-6.075,-5.708974596216,0.5)); +#115255 = CARTESIAN_POINT('',(-6.104537108335,-5.691921338767,0.5)); +#115256 = CARTESIAN_POINT('',(-6.134036877046,-5.676903917723, + 0.497378939504)); +#115257 = CARTESIAN_POINT('',(-6.192388658098,-5.650536041884, + 0.486894697519)); +#115258 = CARTESIAN_POINT('',(-6.219735141527,-5.639703089998, + 0.479589413817)); +#115259 = CARTESIAN_POINT('',(-6.309143188749,-5.608928639276, + 0.446462994505)); +#115260 = CARTESIAN_POINT('',(-6.365196222686,-5.596056012113, + 0.412157972017)); +#115261 = CARTESIAN_POINT('',(-6.436935238802,-5.584280382341, + 0.346566634476)); +#115262 = CARTESIAN_POINT('',(-6.458491750398,-5.581625064993, + 0.322673105282)); +#115263 = CARTESIAN_POINT('',(-6.487127294343,-5.57882211878, + 0.283788186468)); +#115264 = CARTESIAN_POINT('',(-6.496057208174,-5.578086066762, + 0.270319109359)); +#115265 = CARTESIAN_POINT('',(-6.512671494416,-5.576909567195, + 0.242366080135)); +#115266 = CARTESIAN_POINT('',(-6.519589393079,-5.576505627167, + 0.229510475917)); +#115267 = CARTESIAN_POINT('',(-6.558707488106,-5.574642003548, + 0.146411788334)); +#115268 = CARTESIAN_POINT('',(-6.574593325465,-5.575,7.544820886735E-02) + ); +#115269 = CARTESIAN_POINT('',(-6.575,-5.575,0.)); +#115270 = ORIENTED_EDGE('',*,*,#105536,.F.); +#115271 = ORIENTED_EDGE('',*,*,#115272,.T.); +#115272 = EDGE_CURVE('',#105529,#115273,#115275,.T.); +#115273 = VERTEX_POINT('',#115274); +#115274 = CARTESIAN_POINT('',(-6.572493718553,-4.3,5.E-02)); +#115275 = CIRCLE('',#115276,0.5); +#115276 = AXIS2_PLACEMENT_3D('',#115277,#115278,#115279); +#115277 = CARTESIAN_POINT('',(-6.075,-4.3,0.)); +#115278 = DIRECTION('',(0.,-1.,0.)); +#115279 = DIRECTION('',(0.,0.,1.)); +#115280 = ORIENTED_EDGE('',*,*,#115281,.T.); +#115281 = EDGE_CURVE('',#115273,#107123,#115282,.T.); +#115282 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115283,#115284,#115285, + #115286,#115287),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115283 = CARTESIAN_POINT('',(-6.572493718553,-4.3,5.E-02)); +#115284 = CARTESIAN_POINT('',(-6.573347042135,-4.3,4.150953756753E-02)); +#115285 = CARTESIAN_POINT('',(-6.574611284412,-4.29855458162, + 2.452188107117E-02)); +#115286 = CARTESIAN_POINT('',(-6.575,-4.294254978462,8.014693962438E-03) + ); +#115287 = CARTESIAN_POINT('',(-6.575,-4.291421356237,0.)); +#115288 = ORIENTED_EDGE('',*,*,#107122,.T.); +#115289 = CYLINDRICAL_SURFACE('',#115290,0.5); +#115290 = AXIS2_PLACEMENT_3D('',#115291,#115292,#115293); +#115291 = CARTESIAN_POINT('',(-6.075,23.71734,0.)); +#115292 = DIRECTION('',(0.,-1.,0.)); +#115293 = DIRECTION('',(0.,0.,1.)); +#115294 = ADVANCED_FACE('',(#115295),#115307,.F.); +#115295 = FACE_BOUND('',#115296,.F.); +#115296 = EDGE_LOOP('',(#115297,#115303,#115304,#115305,#115306)); +#115297 = ORIENTED_EDGE('',*,*,#115298,.F.); +#115298 = EDGE_CURVE('',#107174,#106447,#115299,.T.); +#115299 = LINE('',#115300,#115301); +#115300 = CARTESIAN_POINT('',(-6.575,4.15,-0.1)); +#115301 = VECTOR('',#115302,1.); +#115302 = DIRECTION('',(1.,0.,0.)); +#115303 = ORIENTED_EDGE('',*,*,#107181,.T.); +#115304 = ORIENTED_EDGE('',*,*,#115199,.T.); +#115305 = ORIENTED_EDGE('',*,*,#106280,.T.); +#115306 = ORIENTED_EDGE('',*,*,#106446,.T.); +#115307 = CYLINDRICAL_SURFACE('',#115308,0.15); +#115308 = AXIS2_PLACEMENT_3D('',#115309,#115310,#115311); +#115309 = CARTESIAN_POINT('',(-23.71734,4.15,5.E-02)); +#115310 = DIRECTION('',(1.,0.,0.)); +#115311 = DIRECTION('',(0.,0.,-1.)); +#115312 = ADVANCED_FACE('',(#115313),#115324,.T.); +#115313 = FACE_BOUND('',#115314,.T.); +#115314 = EDGE_LOOP('',(#115315,#115316,#115322,#115323)); +#115315 = ORIENTED_EDGE('',*,*,#107173,.T.); +#115316 = ORIENTED_EDGE('',*,*,#115317,.F.); +#115317 = EDGE_CURVE('',#106456,#107165,#115318,.T.); +#115318 = LINE('',#115319,#115320); +#115319 = CARTESIAN_POINT('',(-6.075,2.95,-0.1)); +#115320 = VECTOR('',#115321,1.); +#115321 = DIRECTION('',(-1.,0.,0.)); +#115322 = ORIENTED_EDGE('',*,*,#106455,.F.); +#115323 = ORIENTED_EDGE('',*,*,#115298,.F.); +#115324 = PLANE('',#115325); +#115325 = AXIS2_PLACEMENT_3D('',#115326,#115327,#115328); +#115326 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#115327 = DIRECTION('',(0.,0.,1.)); +#115328 = DIRECTION('',(1.,0.,-0.)); +#115329 = ADVANCED_FACE('',(#115330),#115346,.T.); +#115330 = FACE_BOUND('',#115331,.T.); +#115331 = EDGE_LOOP('',(#115332,#115333,#115339,#115340)); +#115332 = ORIENTED_EDGE('',*,*,#107139,.T.); +#115333 = ORIENTED_EDGE('',*,*,#115334,.F.); +#115334 = EDGE_CURVE('',#106490,#107131,#115335,.T.); +#115335 = LINE('',#115336,#115337); +#115336 = CARTESIAN_POINT('',(-6.075,-4.15,-0.1)); +#115337 = VECTOR('',#115338,1.); +#115338 = DIRECTION('',(-1.,0.,0.)); +#115339 = ORIENTED_EDGE('',*,*,#106489,.F.); +#115340 = ORIENTED_EDGE('',*,*,#115341,.F.); +#115341 = EDGE_CURVE('',#107140,#106481,#115342,.T.); +#115342 = LINE('',#115343,#115344); +#115343 = CARTESIAN_POINT('',(-6.575,-2.95,-0.1)); +#115344 = VECTOR('',#115345,1.); +#115345 = DIRECTION('',(1.,0.,0.)); +#115346 = PLANE('',#115347); +#115347 = AXIS2_PLACEMENT_3D('',#115348,#115349,#115350); +#115348 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#115349 = DIRECTION('',(0.,0.,1.)); +#115350 = DIRECTION('',(1.,0.,-0.)); +#115351 = ADVANCED_FACE('',(#115352),#115359,.F.); +#115352 = FACE_BOUND('',#115353,.F.); +#115353 = EDGE_LOOP('',(#115354,#115355,#115356,#115357,#115358)); +#115354 = ORIENTED_EDGE('',*,*,#115317,.F.); +#115355 = ORIENTED_EDGE('',*,*,#106463,.T.); +#115356 = ORIENTED_EDGE('',*,*,#106189,.T.); +#115357 = ORIENTED_EDGE('',*,*,#115235,.T.); +#115358 = ORIENTED_EDGE('',*,*,#107164,.T.); +#115359 = CYLINDRICAL_SURFACE('',#115360,0.15); +#115360 = AXIS2_PLACEMENT_3D('',#115361,#115362,#115363); +#115361 = CARTESIAN_POINT('',(23.71734,2.95,5.E-02)); +#115362 = DIRECTION('',(-1.,0.,0.)); +#115363 = DIRECTION('',(0.,0.,-1.)); +#115364 = ADVANCED_FACE('',(#115365),#115377,.F.); +#115365 = FACE_BOUND('',#115366,.F.); +#115366 = EDGE_LOOP('',(#115367,#115368,#115369,#115370,#115376)); +#115367 = ORIENTED_EDGE('',*,*,#115341,.F.); +#115368 = ORIENTED_EDGE('',*,*,#107147,.T.); +#115369 = ORIENTED_EDGE('',*,*,#115216,.T.); +#115370 = ORIENTED_EDGE('',*,*,#115371,.T.); +#115371 = EDGE_CURVE('',#115217,#106473,#115372,.T.); +#115372 = LINE('',#115373,#115374); +#115373 = CARTESIAN_POINT('',(-6.572493718553,-2.8,5.E-02)); +#115374 = VECTOR('',#115375,1.); +#115375 = DIRECTION('',(1.,0.,0.)); +#115376 = ORIENTED_EDGE('',*,*,#106480,.T.); +#115377 = CYLINDRICAL_SURFACE('',#115378,0.15); +#115378 = AXIS2_PLACEMENT_3D('',#115379,#115380,#115381); +#115379 = CARTESIAN_POINT('',(-23.71734,-2.95,5.E-02)); +#115380 = DIRECTION('',(1.,0.,0.)); +#115381 = DIRECTION('',(0.,0.,-1.)); +#115382 = ADVANCED_FACE('',(#115383),#115396,.F.); +#115383 = FACE_BOUND('',#115384,.T.); +#115384 = EDGE_LOOP('',(#115385,#115386,#115387,#115388,#115389,#115390) + ); +#115385 = ORIENTED_EDGE('',*,*,#105494,.F.); +#115386 = ORIENTED_EDGE('',*,*,#115226,.T.); +#115387 = ORIENTED_EDGE('',*,*,#115371,.T.); +#115388 = ORIENTED_EDGE('',*,*,#106472,.T.); +#115389 = ORIENTED_EDGE('',*,*,#105287,.T.); +#115390 = ORIENTED_EDGE('',*,*,#115391,.F.); +#115391 = EDGE_CURVE('',#105495,#105279,#115392,.T.); +#115392 = LINE('',#115393,#115394); +#115393 = CARTESIAN_POINT('',(-5.925,-2.8,0.5)); +#115394 = VECTOR('',#115395,1.); +#115395 = DIRECTION('',(0.,0.,-1.)); +#115396 = PLANE('',#115397); +#115397 = AXIS2_PLACEMENT_3D('',#115398,#115399,#115400); +#115398 = CARTESIAN_POINT('',(-5.775,-2.8,0.5)); +#115399 = DIRECTION('',(-0.,1.,0.)); +#115400 = DIRECTION('',(1.,0.,0.)); +#115401 = ADVANCED_FACE('',(#115402),#115413,.F.); +#115402 = FACE_BOUND('',#115403,.F.); +#115403 = EDGE_LOOP('',(#115404,#115405,#115406,#115412)); +#115404 = ORIENTED_EDGE('',*,*,#115391,.F.); +#115405 = ORIENTED_EDGE('',*,*,#105502,.T.); +#115406 = ORIENTED_EDGE('',*,*,#115407,.T.); +#115407 = EDGE_CURVE('',#105503,#105271,#115408,.T.); +#115408 = LINE('',#115409,#115410); +#115409 = CARTESIAN_POINT('',(-5.775,-2.95,0.5)); +#115410 = VECTOR('',#115411,1.); +#115411 = DIRECTION('',(0.,0.,-1.)); +#115412 = ORIENTED_EDGE('',*,*,#105278,.T.); +#115413 = CYLINDRICAL_SURFACE('',#115414,0.15); +#115414 = AXIS2_PLACEMENT_3D('',#115415,#115416,#115417); +#115415 = CARTESIAN_POINT('',(-5.925,-2.95,18.48968)); +#115416 = DIRECTION('',(0.,0.,-1.)); +#115417 = DIRECTION('',(0.,1.,0.)); +#115418 = ADVANCED_FACE('',(#115419),#115430,.F.); +#115419 = FACE_BOUND('',#115420,.T.); +#115420 = EDGE_LOOP('',(#115421,#115422,#115428,#115429)); +#115421 = ORIENTED_EDGE('',*,*,#105270,.F.); +#115422 = ORIENTED_EDGE('',*,*,#115423,.F.); +#115423 = EDGE_CURVE('',#105512,#105262,#115424,.T.); +#115424 = LINE('',#115425,#115426); +#115425 = CARTESIAN_POINT('',(-5.775,-4.15,0.5)); +#115426 = VECTOR('',#115427,1.); +#115427 = DIRECTION('',(0.,0.,-1.)); +#115428 = ORIENTED_EDGE('',*,*,#105511,.T.); +#115429 = ORIENTED_EDGE('',*,*,#115407,.T.); +#115430 = PLANE('',#115431); +#115431 = AXIS2_PLACEMENT_3D('',#115432,#115433,#115434); +#115432 = CARTESIAN_POINT('',(-5.775,-4.3,0.5)); +#115433 = DIRECTION('',(1.,0.,0.)); +#115434 = DIRECTION('',(-0.,1.,0.)); +#115435 = ADVANCED_FACE('',(#115436),#115447,.F.); +#115436 = FACE_BOUND('',#115437,.F.); +#115437 = EDGE_LOOP('',(#115438,#115439,#115440,#115446)); +#115438 = ORIENTED_EDGE('',*,*,#115423,.F.); +#115439 = ORIENTED_EDGE('',*,*,#105519,.T.); +#115440 = ORIENTED_EDGE('',*,*,#115441,.T.); +#115441 = EDGE_CURVE('',#105520,#105254,#115442,.T.); +#115442 = LINE('',#115443,#115444); +#115443 = CARTESIAN_POINT('',(-5.925,-4.3,0.5)); +#115444 = VECTOR('',#115445,1.); +#115445 = DIRECTION('',(0.,0.,-1.)); +#115446 = ORIENTED_EDGE('',*,*,#105261,.T.); +#115447 = CYLINDRICAL_SURFACE('',#115448,0.15); +#115448 = AXIS2_PLACEMENT_3D('',#115449,#115450,#115451); +#115449 = CARTESIAN_POINT('',(-5.925,-4.15,18.48968)); +#115450 = DIRECTION('',(0.,0.,-1.)); +#115451 = DIRECTION('',(1.,0.,0.)); +#115452 = ADVANCED_FACE('',(#115453),#115466,.F.); +#115453 = FACE_BOUND('',#115454,.T.); +#115454 = EDGE_LOOP('',(#115455,#115456,#115457,#115463,#115464,#115465) + ); +#115455 = ORIENTED_EDGE('',*,*,#105253,.F.); +#115456 = ORIENTED_EDGE('',*,*,#106506,.F.); +#115457 = ORIENTED_EDGE('',*,*,#115458,.T.); +#115458 = EDGE_CURVE('',#106498,#115273,#115459,.T.); +#115459 = LINE('',#115460,#115461); +#115460 = CARTESIAN_POINT('',(-6.075,-4.3,5.E-02)); +#115461 = VECTOR('',#115462,1.); +#115462 = DIRECTION('',(-1.,0.,0.)); +#115463 = ORIENTED_EDGE('',*,*,#115272,.F.); +#115464 = ORIENTED_EDGE('',*,*,#105528,.T.); +#115465 = ORIENTED_EDGE('',*,*,#115441,.T.); +#115466 = PLANE('',#115467); +#115467 = AXIS2_PLACEMENT_3D('',#115468,#115469,#115470); +#115468 = CARTESIAN_POINT('',(-6.575,-4.3,0.5)); +#115469 = DIRECTION('',(0.,-1.,0.)); +#115470 = DIRECTION('',(0.,0.,-1.)); +#115471 = ADVANCED_FACE('',(#115472),#115479,.F.); +#115472 = FACE_BOUND('',#115473,.F.); +#115473 = EDGE_LOOP('',(#115474,#115475,#115476,#115477,#115478)); +#115474 = ORIENTED_EDGE('',*,*,#115334,.F.); +#115475 = ORIENTED_EDGE('',*,*,#106497,.T.); +#115476 = ORIENTED_EDGE('',*,*,#115458,.T.); +#115477 = ORIENTED_EDGE('',*,*,#115281,.T.); +#115478 = ORIENTED_EDGE('',*,*,#107130,.T.); +#115479 = CYLINDRICAL_SURFACE('',#115480,0.15); +#115480 = AXIS2_PLACEMENT_3D('',#115481,#115482,#115483); +#115481 = CARTESIAN_POINT('',(23.71734,-4.15,5.E-02)); +#115482 = DIRECTION('',(-1.,0.,0.)); +#115483 = DIRECTION('',(0.,0.,-1.)); +#115484 = ADVANCED_FACE('',(#115485),#115513,.F.); +#115485 = FACE_BOUND('',#115486,.F.); +#115486 = EDGE_LOOP('',(#115487,#115510,#115511,#115512)); +#115487 = ORIENTED_EDGE('',*,*,#115488,.F.); +#115488 = EDGE_CURVE('',#105888,#104830,#115489,.T.); +#115489 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115490,#115491,#115492, + #115493,#115494,#115495,#115496,#115497,#115498,#115499,#115500, + #115501,#115502,#115503,#115504,#115505,#115506,#115507,#115508, + #115509),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,2,4),(0.,0.125,0.25, + 0.5,0.625,0.6875,0.75,0.875,0.9375,1.),.UNSPECIFIED.); +#115490 = CARTESIAN_POINT('',(-5.708974596216,6.075,0.5)); +#115491 = CARTESIAN_POINT('',(-5.691921338767,6.104537108335,0.5)); +#115492 = CARTESIAN_POINT('',(-5.676903917723,6.134036877046, + 0.497378939504)); +#115493 = CARTESIAN_POINT('',(-5.650536041884,6.192388658098, + 0.486894697519)); +#115494 = CARTESIAN_POINT('',(-5.639703089998,6.219735141527, + 0.479589413817)); +#115495 = CARTESIAN_POINT('',(-5.608928639276,6.309143188749, + 0.446462994505)); +#115496 = CARTESIAN_POINT('',(-5.596051896075,6.365221298246, + 0.412135045307)); +#115497 = CARTESIAN_POINT('',(-5.58428244036,6.436922701021, + 0.346578097831)); +#115498 = CARTESIAN_POINT('',(-5.581627463794,6.458471678626, + 0.322692782563)); +#115499 = CARTESIAN_POINT('',(-5.578824209552,6.487103720964, + 0.283815310497)); +#115500 = CARTESIAN_POINT('',(-5.578087911442,6.496033763625, + 0.270347903281)); +#115501 = CARTESIAN_POINT('',(-5.576910840487,6.512650914504, + 0.242396589128)); +#115502 = CARTESIAN_POINT('',(-5.576506567583,6.519560729576, + 0.229576443867)); +#115503 = CARTESIAN_POINT('',(-5.575377890884,6.543278901161, + 0.179178054681)); +#115504 = CARTESIAN_POINT('',(-5.575165445261,6.55515816293, + 0.144665835065)); +#115505 = CARTESIAN_POINT('',(-5.575023765946,6.567047631489, + 9.15275654019E-02)); +#115506 = CARTESIAN_POINT('',(-5.575010408987,6.570023190202, + 7.358648547459E-02)); +#115507 = CARTESIAN_POINT('',(-5.574998526136,6.573998481266, + 3.724767887391E-02)); +#115508 = CARTESIAN_POINT('',(-5.575,6.575,2.005935584669E-02)); +#115509 = CARTESIAN_POINT('',(-5.575,6.575,0.)); +#115510 = ORIENTED_EDGE('',*,*,#105895,.T.); +#115511 = ORIENTED_EDGE('',*,*,#115179,.F.); +#115512 = ORIENTED_EDGE('',*,*,#104829,.F.); +#115513 = CYLINDRICAL_SURFACE('',#115514,1.); +#115514 = AXIS2_PLACEMENT_3D('',#115515,#115516,#115517); +#115515 = CARTESIAN_POINT('',(-6.575,6.575,0.)); +#115516 = DIRECTION('',(0.,0.,1.)); +#115517 = DIRECTION('',(1.,0.,-0.)); +#115518 = ADVANCED_FACE('',(#115519),#115566,.T.); +#115519 = FACE_BOUND('',#115520,.T.); +#115520 = EDGE_LOOP('',(#115521,#115522,#115541,#115549,#115559)); +#115521 = ORIENTED_EDGE('',*,*,#105787,.F.); +#115522 = ORIENTED_EDGE('',*,*,#115523,.F.); +#115523 = EDGE_CURVE('',#104955,#105779,#115524,.T.); +#115524 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115525,#115526,#115527, + #115528,#115529,#115530,#115531,#115532,#115533,#115534,#115535, + #115536,#115537,#115538,#115539,#115540),.UNSPECIFIED.,.F.,.F.,(4,2, + 2,2,2,2,2,4),(0.,0.125,0.1875,0.25,0.5,0.625,0.75,1.), + .UNSPECIFIED.); +#115525 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#115526 = CARTESIAN_POINT('',(5.575,6.574796801379,3.770355152131E-02)); +#115527 = CARTESIAN_POINT('',(5.57497766524,6.570729105599, + 7.429352237019E-02)); +#115528 = CARTESIAN_POINT('',(5.575122836703,6.558832564932, + 0.127508107635)); +#115529 = CARTESIAN_POINT('',(5.575205207284,6.553901235993, + 0.144967907555)); +#115530 = CARTESIAN_POINT('',(5.575523630071,6.542109707539, + 0.179330717059)); +#115531 = CARTESIAN_POINT('',(5.575796534167,6.53447576199, + 0.197878188092)); +#115532 = CARTESIAN_POINT('',(5.577474745007,6.499238231016, + 0.272778952927)); +#115533 = CARTESIAN_POINT('',(5.580190560642,6.461862265275, + 0.323752773972)); +#115534 = CARTESIAN_POINT('',(5.592204215956,6.388656395925, + 0.390719521771)); +#115535 = CARTESIAN_POINT('',(5.597387131599,6.362715377702, + 0.410225847999)); +#115536 = CARTESIAN_POINT('',(5.610870406455,6.308080895814, + 0.443606654376)); +#115537 = CARTESIAN_POINT('',(5.61970259012,6.277843946204, + 0.458052922183)); +#115538 = CARTESIAN_POINT('',(5.648908622455,6.192986640334, + 0.489513230546)); +#115539 = CARTESIAN_POINT('',(5.674848892149,6.134107453287,0.5)); +#115540 = CARTESIAN_POINT('',(5.708974596216,6.075,0.5)); +#115541 = ORIENTED_EDGE('',*,*,#115542,.T.); +#115542 = EDGE_CURVE('',#104955,#115543,#115545,.T.); +#115543 = VERTEX_POINT('',#115544); +#115544 = CARTESIAN_POINT('',(4.291421356237,6.575,0.)); +#115545 = LINE('',#115546,#115547); +#115546 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#115547 = VECTOR('',#115548,1.); +#115548 = DIRECTION('',(-1.,0.,0.)); +#115549 = ORIENTED_EDGE('',*,*,#115550,.T.); +#115550 = EDGE_CURVE('',#115543,#115551,#115553,.T.); +#115551 = VERTEX_POINT('',#115552); +#115552 = CARTESIAN_POINT('',(4.3,6.572493718553,5.E-02)); +#115553 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115554,#115555,#115556, + #115557,#115558),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115554 = CARTESIAN_POINT('',(4.291421356237,6.575,0.)); +#115555 = CARTESIAN_POINT('',(4.294254978462,6.575,8.014693962439E-03)); +#115556 = CARTESIAN_POINT('',(4.29855458162,6.574611284412, + 2.452188107118E-02)); +#115557 = CARTESIAN_POINT('',(4.3,6.573347042135,4.150953756753E-02)); +#115558 = CARTESIAN_POINT('',(4.3,6.572493718553,5.E-02)); +#115559 = ORIENTED_EDGE('',*,*,#115560,.F.); +#115560 = EDGE_CURVE('',#105788,#115551,#115561,.T.); +#115561 = CIRCLE('',#115562,0.5); +#115562 = AXIS2_PLACEMENT_3D('',#115563,#115564,#115565); +#115563 = CARTESIAN_POINT('',(4.3,6.075,0.)); +#115564 = DIRECTION('',(-1.,0.,0.)); +#115565 = DIRECTION('',(0.,0.,1.)); +#115566 = CYLINDRICAL_SURFACE('',#115567,0.5); +#115567 = AXIS2_PLACEMENT_3D('',#115568,#115569,#115570); +#115568 = CARTESIAN_POINT('',(23.71734,6.075,0.)); +#115569 = DIRECTION('',(-1.,0.,0.)); +#115570 = DIRECTION('',(0.,0.,1.)); +#115571 = ADVANCED_FACE('',(#115572),#115619,.T.); +#115572 = FACE_BOUND('',#115573,.T.); +#115573 = EDGE_LOOP('',(#115574,#115586,#115593,#115594,#115603,#115613) + ); +#115574 = ORIENTED_EDGE('',*,*,#115575,.T.); +#115575 = EDGE_CURVE('',#115576,#115578,#115580,.T.); +#115576 = VERTEX_POINT('',#115577); +#115577 = CARTESIAN_POINT('',(-2.808578643763,6.575,0.)); +#115578 = VERTEX_POINT('',#115579); +#115579 = CARTESIAN_POINT('',(-2.8,6.572493718553,5.E-02)); +#115580 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115581,#115582,#115583, + #115584,#115585),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115581 = CARTESIAN_POINT('',(-2.808578643763,6.575,0.)); +#115582 = CARTESIAN_POINT('',(-2.805745021538,6.575,8.014693962438E-03) + ); +#115583 = CARTESIAN_POINT('',(-2.80144541838,6.574611284412, + 2.452188107117E-02)); +#115584 = CARTESIAN_POINT('',(-2.8,6.573347042135,4.150953756753E-02)); +#115585 = CARTESIAN_POINT('',(-2.8,6.572493718553,5.E-02)); +#115586 = ORIENTED_EDGE('',*,*,#115587,.F.); +#115587 = EDGE_CURVE('',#105838,#115578,#115588,.T.); +#115588 = CIRCLE('',#115589,0.5); +#115589 = AXIS2_PLACEMENT_3D('',#115590,#115591,#115592); +#115590 = CARTESIAN_POINT('',(-2.8,6.075,0.)); +#115591 = DIRECTION('',(-1.,0.,0.)); +#115592 = DIRECTION('',(0.,0.,1.)); +#115593 = ORIENTED_EDGE('',*,*,#105837,.F.); +#115594 = ORIENTED_EDGE('',*,*,#115595,.T.); +#115595 = EDGE_CURVE('',#105830,#115596,#115598,.T.); +#115596 = VERTEX_POINT('',#115597); +#115597 = CARTESIAN_POINT('',(2.8,6.572493718553,5.E-02)); +#115598 = CIRCLE('',#115599,0.5); +#115599 = AXIS2_PLACEMENT_3D('',#115600,#115601,#115602); +#115600 = CARTESIAN_POINT('',(2.8,6.075,0.)); +#115601 = DIRECTION('',(-1.,0.,0.)); +#115602 = DIRECTION('',(0.,0.,1.)); +#115603 = ORIENTED_EDGE('',*,*,#115604,.T.); +#115604 = EDGE_CURVE('',#115596,#115605,#115607,.T.); +#115605 = VERTEX_POINT('',#115606); +#115606 = CARTESIAN_POINT('',(2.808578643763,6.575,0.)); +#115607 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115608,#115609,#115610, + #115611,#115612),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115608 = CARTESIAN_POINT('',(2.8,6.572493718553,5.E-02)); +#115609 = CARTESIAN_POINT('',(2.8,6.573347042135,4.150953756753E-02)); +#115610 = CARTESIAN_POINT('',(2.80144541838,6.574611284412, + 2.452188107117E-02)); +#115611 = CARTESIAN_POINT('',(2.805745021538,6.575,8.014693962439E-03)); +#115612 = CARTESIAN_POINT('',(2.808578643763,6.575,0.)); +#115613 = ORIENTED_EDGE('',*,*,#115614,.T.); +#115614 = EDGE_CURVE('',#115605,#115576,#115615,.T.); +#115615 = LINE('',#115616,#115617); +#115616 = CARTESIAN_POINT('',(2.808578643763,6.575,0.)); +#115617 = VECTOR('',#115618,1.); +#115618 = DIRECTION('',(-1.,0.,0.)); +#115619 = CYLINDRICAL_SURFACE('',#115620,0.5); +#115620 = AXIS2_PLACEMENT_3D('',#115621,#115622,#115623); +#115621 = CARTESIAN_POINT('',(23.71734,6.075,0.)); +#115622 = DIRECTION('',(-1.,0.,0.)); +#115623 = DIRECTION('',(0.,0.,1.)); +#115624 = ADVANCED_FACE('',(#115625),#115654,.T.); +#115625 = FACE_BOUND('',#115626,.T.); +#115626 = EDGE_LOOP('',(#115627,#115628,#115629,#115638,#115648)); +#115627 = ORIENTED_EDGE('',*,*,#115488,.F.); +#115628 = ORIENTED_EDGE('',*,*,#105887,.F.); +#115629 = ORIENTED_EDGE('',*,*,#115630,.T.); +#115630 = EDGE_CURVE('',#105880,#115631,#115633,.T.); +#115631 = VERTEX_POINT('',#115632); +#115632 = CARTESIAN_POINT('',(-4.3,6.572493718553,5.E-02)); +#115633 = CIRCLE('',#115634,0.5); +#115634 = AXIS2_PLACEMENT_3D('',#115635,#115636,#115637); +#115635 = CARTESIAN_POINT('',(-4.3,6.075,0.)); +#115636 = DIRECTION('',(-1.,0.,0.)); +#115637 = DIRECTION('',(0.,0.,1.)); +#115638 = ORIENTED_EDGE('',*,*,#115639,.T.); +#115639 = EDGE_CURVE('',#115631,#115640,#115642,.T.); +#115640 = VERTEX_POINT('',#115641); +#115641 = CARTESIAN_POINT('',(-4.291421356237,6.575,0.)); +#115642 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#115643,#115644,#115645, + #115646,#115647),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#115643 = CARTESIAN_POINT('',(-4.3,6.572493718553,5.E-02)); +#115644 = CARTESIAN_POINT('',(-4.3,6.573347042135,4.150953756753E-02)); +#115645 = CARTESIAN_POINT('',(-4.29855458162,6.574611284412, + 2.452188107117E-02)); +#115646 = CARTESIAN_POINT('',(-4.294254978462,6.575,8.014693962438E-03) + ); +#115647 = CARTESIAN_POINT('',(-4.291421356237,6.575,0.)); +#115648 = ORIENTED_EDGE('',*,*,#115649,.T.); +#115649 = EDGE_CURVE('',#115640,#104830,#115650,.T.); +#115650 = LINE('',#115651,#115652); +#115651 = CARTESIAN_POINT('',(-4.291421356237,6.575,0.)); +#115652 = VECTOR('',#115653,1.); +#115653 = DIRECTION('',(-1.,0.,0.)); +#115654 = CYLINDRICAL_SURFACE('',#115655,0.5); +#115655 = AXIS2_PLACEMENT_3D('',#115656,#115657,#115658); +#115656 = CARTESIAN_POINT('',(23.71734,6.075,0.)); +#115657 = DIRECTION('',(-1.,0.,0.)); +#115658 = DIRECTION('',(0.,0.,1.)); +#115659 = ADVANCED_FACE('',(#115660),#115685,.F.); +#115660 = FACE_BOUND('',#115661,.T.); +#115661 = EDGE_LOOP('',(#115662,#115663,#115664,#115672,#115678,#115679) + ); +#115662 = ORIENTED_EDGE('',*,*,#105795,.F.); +#115663 = ORIENTED_EDGE('',*,*,#115560,.T.); +#115664 = ORIENTED_EDGE('',*,*,#115665,.T.); +#115665 = EDGE_CURVE('',#115551,#115666,#115668,.T.); +#115666 = VERTEX_POINT('',#115667); +#115667 = CARTESIAN_POINT('',(4.3,6.075,5.E-02)); +#115668 = LINE('',#115669,#115670); +#115669 = CARTESIAN_POINT('',(4.3,6.572493718553,5.E-02)); +#115670 = VECTOR('',#115671,1.); +#115671 = DIRECTION('',(0.,-1.,0.)); +#115672 = ORIENTED_EDGE('',*,*,#115673,.T.); +#115673 = EDGE_CURVE('',#115666,#104939,#115674,.T.); +#115674 = LINE('',#115675,#115676); +#115675 = CARTESIAN_POINT('',(4.3,6.075,5.E-02)); +#115676 = VECTOR('',#115677,1.); +#115677 = DIRECTION('',(1.7763568394E-14,1.7763568394E-14,-1.)); +#115678 = ORIENTED_EDGE('',*,*,#104938,.T.); +#115679 = ORIENTED_EDGE('',*,*,#115680,.F.); +#115680 = EDGE_CURVE('',#105796,#104930,#115681,.T.); +#115681 = LINE('',#115682,#115683); +#115682 = CARTESIAN_POINT('',(4.3,5.925,0.5)); +#115683 = VECTOR('',#115684,1.); +#115684 = DIRECTION('',(0.,0.,-1.)); +#115685 = PLANE('',#115686); +#115686 = AXIS2_PLACEMENT_3D('',#115687,#115688,#115689); +#115687 = CARTESIAN_POINT('',(4.3,5.775,0.5)); +#115688 = DIRECTION('',(1.,0.,0.)); +#115689 = DIRECTION('',(-0.,1.,0.)); +#115690 = ADVANCED_FACE('',(#115691),#115702,.F.); +#115691 = FACE_BOUND('',#115692,.F.); +#115692 = EDGE_LOOP('',(#115693,#115694,#115695,#115701)); +#115693 = ORIENTED_EDGE('',*,*,#115680,.F.); +#115694 = ORIENTED_EDGE('',*,*,#105803,.T.); +#115695 = ORIENTED_EDGE('',*,*,#115696,.T.); +#115696 = EDGE_CURVE('',#105804,#104922,#115697,.T.); +#115697 = LINE('',#115698,#115699); +#115698 = CARTESIAN_POINT('',(4.15,5.775,0.5)); +#115699 = VECTOR('',#115700,1.); +#115700 = DIRECTION('',(0.,0.,-1.)); +#115701 = ORIENTED_EDGE('',*,*,#104929,.T.); +#115702 = CYLINDRICAL_SURFACE('',#115703,0.15); +#115703 = AXIS2_PLACEMENT_3D('',#115704,#115705,#115706); +#115704 = CARTESIAN_POINT('',(4.15,5.925,18.48968)); +#115705 = DIRECTION('',(0.,0.,-1.)); +#115706 = DIRECTION('',(1.,0.,0.)); +#115707 = ADVANCED_FACE('',(#115708),#115719,.F.); +#115708 = FACE_BOUND('',#115709,.T.); +#115709 = EDGE_LOOP('',(#115710,#115711,#115717,#115718)); +#115710 = ORIENTED_EDGE('',*,*,#104921,.F.); +#115711 = ORIENTED_EDGE('',*,*,#115712,.F.); +#115712 = EDGE_CURVE('',#105813,#104913,#115713,.T.); +#115713 = LINE('',#115714,#115715); +#115714 = CARTESIAN_POINT('',(2.95,5.775,0.5)); +#115715 = VECTOR('',#115716,1.); +#115716 = DIRECTION('',(0.,0.,-1.)); +#115717 = ORIENTED_EDGE('',*,*,#105812,.T.); +#115718 = ORIENTED_EDGE('',*,*,#115696,.T.); +#115719 = PLANE('',#115720); +#115720 = AXIS2_PLACEMENT_3D('',#115721,#115722,#115723); +#115721 = CARTESIAN_POINT('',(2.8,5.775,0.5)); +#115722 = DIRECTION('',(0.,-1.,0.)); +#115723 = DIRECTION('',(0.,0.,-1.)); +#115724 = ADVANCED_FACE('',(#115725),#115736,.F.); +#115725 = FACE_BOUND('',#115726,.F.); +#115726 = EDGE_LOOP('',(#115727,#115728,#115729,#115735)); +#115727 = ORIENTED_EDGE('',*,*,#115712,.F.); +#115728 = ORIENTED_EDGE('',*,*,#105820,.T.); +#115729 = ORIENTED_EDGE('',*,*,#115730,.T.); +#115730 = EDGE_CURVE('',#105821,#104905,#115731,.T.); +#115731 = LINE('',#115732,#115733); +#115732 = CARTESIAN_POINT('',(2.8,5.925,0.5)); +#115733 = VECTOR('',#115734,1.); +#115734 = DIRECTION('',(0.,0.,-1.)); +#115735 = ORIENTED_EDGE('',*,*,#104912,.T.); +#115736 = CYLINDRICAL_SURFACE('',#115737,0.15); +#115737 = AXIS2_PLACEMENT_3D('',#115738,#115739,#115740); +#115738 = CARTESIAN_POINT('',(2.95,5.925,18.48968)); +#115739 = DIRECTION('',(0.,0.,-1.)); +#115740 = DIRECTION('',(0.,-1.,0.)); +#115741 = ADVANCED_FACE('',(#115742),#115762,.F.); +#115742 = FACE_BOUND('',#115743,.T.); +#115743 = EDGE_LOOP('',(#115744,#115745,#115753,#115759,#115760,#115761) + ); +#115744 = ORIENTED_EDGE('',*,*,#104904,.F.); +#115745 = ORIENTED_EDGE('',*,*,#115746,.F.); +#115746 = EDGE_CURVE('',#115747,#104897,#115749,.T.); +#115747 = VERTEX_POINT('',#115748); +#115748 = CARTESIAN_POINT('',(2.8,6.075,5.E-02)); +#115749 = LINE('',#115750,#115751); +#115750 = CARTESIAN_POINT('',(2.8,6.075,5.E-02)); +#115751 = VECTOR('',#115752,1.); +#115752 = DIRECTION('',(-2.6645352591E-14,0.,-1.)); +#115753 = ORIENTED_EDGE('',*,*,#115754,.T.); +#115754 = EDGE_CURVE('',#115747,#115596,#115755,.T.); +#115755 = LINE('',#115756,#115757); +#115756 = CARTESIAN_POINT('',(2.8,6.075,5.E-02)); +#115757 = VECTOR('',#115758,1.); +#115758 = DIRECTION('',(0.,1.,0.)); +#115759 = ORIENTED_EDGE('',*,*,#115595,.F.); +#115760 = ORIENTED_EDGE('',*,*,#105829,.T.); +#115761 = ORIENTED_EDGE('',*,*,#115730,.T.); +#115762 = PLANE('',#115763); +#115763 = AXIS2_PLACEMENT_3D('',#115764,#115765,#115766); +#115764 = CARTESIAN_POINT('',(2.8,6.575,0.5)); +#115765 = DIRECTION('',(-1.,0.,0.)); +#115766 = DIRECTION('',(0.,0.,1.)); +#115767 = ADVANCED_FACE('',(#115768),#115796,.F.); +#115768 = FACE_BOUND('',#115769,.F.); +#115769 = EDGE_LOOP('',(#115770,#115780,#115787,#115788,#115789)); +#115770 = ORIENTED_EDGE('',*,*,#115771,.F.); +#115771 = EDGE_CURVE('',#115772,#115774,#115776,.T.); +#115772 = VERTEX_POINT('',#115773); +#115773 = CARTESIAN_POINT('',(2.95,6.075,-0.1)); +#115774 = VERTEX_POINT('',#115775); +#115775 = CARTESIAN_POINT('',(2.95,6.575,-0.1)); +#115776 = LINE('',#115777,#115778); +#115777 = CARTESIAN_POINT('',(2.95,6.075,-0.1)); +#115778 = VECTOR('',#115779,1.); +#115779 = DIRECTION('',(0.,1.,0.)); +#115780 = ORIENTED_EDGE('',*,*,#115781,.T.); +#115781 = EDGE_CURVE('',#115772,#115747,#115782,.T.); +#115782 = CIRCLE('',#115783,0.15); +#115783 = AXIS2_PLACEMENT_3D('',#115784,#115785,#115786); +#115784 = CARTESIAN_POINT('',(2.95,6.075,5.E-02)); +#115785 = DIRECTION('',(0.,1.,0.)); +#115786 = DIRECTION('',(-2.312964634636E-14,0.,-1.)); +#115787 = ORIENTED_EDGE('',*,*,#115754,.T.); +#115788 = ORIENTED_EDGE('',*,*,#115604,.T.); +#115789 = ORIENTED_EDGE('',*,*,#115790,.T.); +#115790 = EDGE_CURVE('',#115605,#115774,#115791,.T.); +#115791 = CIRCLE('',#115792,0.15); +#115792 = AXIS2_PLACEMENT_3D('',#115793,#115794,#115795); +#115793 = CARTESIAN_POINT('',(2.95,6.575,5.E-02)); +#115794 = DIRECTION('',(0.,-1.,0.)); +#115795 = DIRECTION('',(-0.942809041582,-0.,-0.333333333333)); +#115796 = CYLINDRICAL_SURFACE('',#115797,0.15); +#115797 = AXIS2_PLACEMENT_3D('',#115798,#115799,#115800); +#115798 = CARTESIAN_POINT('',(2.95,-23.71788209056,5.E-02)); +#115799 = DIRECTION('',(0.,1.,0.)); +#115800 = DIRECTION('',(0.,0.,-1.)); +#115801 = ADVANCED_FACE('',(#115802),#115827,.T.); +#115802 = FACE_BOUND('',#115803,.T.); +#115803 = EDGE_LOOP('',(#115804,#115812,#115813,#115821)); +#115804 = ORIENTED_EDGE('',*,*,#115805,.T.); +#115805 = EDGE_CURVE('',#115806,#115774,#115808,.T.); +#115806 = VERTEX_POINT('',#115807); +#115807 = CARTESIAN_POINT('',(4.15,6.575,-0.1)); +#115808 = LINE('',#115809,#115810); +#115809 = CARTESIAN_POINT('',(4.15,6.575,-0.1)); +#115810 = VECTOR('',#115811,1.); +#115811 = DIRECTION('',(-1.,0.,0.)); +#115812 = ORIENTED_EDGE('',*,*,#115771,.F.); +#115813 = ORIENTED_EDGE('',*,*,#115814,.F.); +#115814 = EDGE_CURVE('',#115815,#115772,#115817,.T.); +#115815 = VERTEX_POINT('',#115816); +#115816 = CARTESIAN_POINT('',(4.15,6.075,-0.1)); +#115817 = LINE('',#115818,#115819); +#115818 = CARTESIAN_POINT('',(4.15,6.075,-0.1)); +#115819 = VECTOR('',#115820,1.); +#115820 = DIRECTION('',(-1.,0.,0.)); +#115821 = ORIENTED_EDGE('',*,*,#115822,.F.); +#115822 = EDGE_CURVE('',#115806,#115815,#115823,.T.); +#115823 = LINE('',#115824,#115825); +#115824 = CARTESIAN_POINT('',(4.15,6.575,-0.1)); +#115825 = VECTOR('',#115826,1.); +#115826 = DIRECTION('',(0.,-1.,0.)); +#115827 = PLANE('',#115828); +#115828 = AXIS2_PLACEMENT_3D('',#115829,#115830,#115831); +#115829 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#115830 = DIRECTION('',(0.,0.,1.)); +#115831 = DIRECTION('',(1.,0.,-0.)); +#115832 = ADVANCED_FACE('',(#115833),#115867,.T.); +#115833 = FACE_BOUND('',#115834,.T.); +#115834 = EDGE_LOOP('',(#115835,#115845,#115853,#115861)); +#115835 = ORIENTED_EDGE('',*,*,#115836,.T.); +#115836 = EDGE_CURVE('',#115837,#115839,#115841,.T.); +#115837 = VERTEX_POINT('',#115838); +#115838 = CARTESIAN_POINT('',(-2.95,6.575,-0.1)); +#115839 = VERTEX_POINT('',#115840); +#115840 = CARTESIAN_POINT('',(-4.15,6.575,-0.1)); +#115841 = LINE('',#115842,#115843); +#115842 = CARTESIAN_POINT('',(-2.95,6.575,-0.1)); +#115843 = VECTOR('',#115844,1.); +#115844 = DIRECTION('',(-1.,0.,0.)); +#115845 = ORIENTED_EDGE('',*,*,#115846,.F.); +#115846 = EDGE_CURVE('',#115847,#115839,#115849,.T.); +#115847 = VERTEX_POINT('',#115848); +#115848 = CARTESIAN_POINT('',(-4.15,6.075,-0.1)); +#115849 = LINE('',#115850,#115851); +#115850 = CARTESIAN_POINT('',(-4.15,6.075,-0.1)); +#115851 = VECTOR('',#115852,1.); +#115852 = DIRECTION('',(0.,1.,0.)); +#115853 = ORIENTED_EDGE('',*,*,#115854,.F.); +#115854 = EDGE_CURVE('',#115855,#115847,#115857,.T.); +#115855 = VERTEX_POINT('',#115856); +#115856 = CARTESIAN_POINT('',(-2.95,6.075,-0.1)); +#115857 = LINE('',#115858,#115859); +#115858 = CARTESIAN_POINT('',(-2.95,6.075,-0.1)); +#115859 = VECTOR('',#115860,1.); +#115860 = DIRECTION('',(-1.,0.,0.)); +#115861 = ORIENTED_EDGE('',*,*,#115862,.F.); +#115862 = EDGE_CURVE('',#115837,#115855,#115863,.T.); +#115863 = LINE('',#115864,#115865); +#115864 = CARTESIAN_POINT('',(-2.95,6.575,-0.1)); +#115865 = VECTOR('',#115866,1.); +#115866 = DIRECTION('',(0.,-1.,0.)); +#115867 = PLANE('',#115868); +#115868 = AXIS2_PLACEMENT_3D('',#115869,#115870,#115871); +#115869 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#115870 = DIRECTION('',(0.,0.,1.)); +#115871 = DIRECTION('',(1.,0.,-0.)); +#115872 = ADVANCED_FACE('',(#115873),#115892,.F.); +#115873 = FACE_BOUND('',#115874,.F.); +#115874 = EDGE_LOOP('',(#115875,#115876,#115883,#115884,#115885)); +#115875 = ORIENTED_EDGE('',*,*,#115822,.F.); +#115876 = ORIENTED_EDGE('',*,*,#115877,.T.); +#115877 = EDGE_CURVE('',#115806,#115543,#115878,.T.); +#115878 = CIRCLE('',#115879,0.15); +#115879 = AXIS2_PLACEMENT_3D('',#115880,#115881,#115882); +#115880 = CARTESIAN_POINT('',(4.15,6.575,5.E-02)); +#115881 = DIRECTION('',(0.,-1.,0.)); +#115882 = DIRECTION('',(1.734723475977E-14,0.,-1.)); +#115883 = ORIENTED_EDGE('',*,*,#115550,.T.); +#115884 = ORIENTED_EDGE('',*,*,#115665,.T.); +#115885 = ORIENTED_EDGE('',*,*,#115886,.T.); +#115886 = EDGE_CURVE('',#115666,#115815,#115887,.T.); +#115887 = CIRCLE('',#115888,0.15); +#115888 = AXIS2_PLACEMENT_3D('',#115889,#115890,#115891); +#115889 = CARTESIAN_POINT('',(4.15,6.075,5.E-02)); +#115890 = DIRECTION('',(0.,1.,0.)); +#115891 = DIRECTION('',(1.,-0.,1.910906329006E-14)); +#115892 = CYLINDRICAL_SURFACE('',#115893,0.15); +#115893 = AXIS2_PLACEMENT_3D('',#115894,#115895,#115896); +#115894 = CARTESIAN_POINT('',(4.15,23.71788209057,5.E-02)); +#115895 = DIRECTION('',(0.,-1.,0.)); +#115896 = DIRECTION('',(0.,0.,-1.)); +#115897 = ADVANCED_FACE('',(#115898),#116137,.T.); +#115898 = FACE_BOUND('',#115899,.T.); +#115899 = EDGE_LOOP('',(#115900,#115910,#115918,#115926,#115934,#115942, + #115950,#115958,#115966,#115974,#115982,#115990,#115998,#116007, + #116013,#116014,#116021,#116022,#116029,#116030,#116031,#116032, + #116033,#116034,#116042,#116051,#116059,#116067,#116075,#116083, + #116091,#116099,#116107,#116115,#116123,#116131)); +#115900 = ORIENTED_EDGE('',*,*,#115901,.F.); +#115901 = EDGE_CURVE('',#115902,#115904,#115906,.T.); +#115902 = VERTEX_POINT('',#115903); +#115903 = CARTESIAN_POINT('',(-1.975,6.575,-7.881448674684)); +#115904 = VERTEX_POINT('',#115905); +#115905 = CARTESIAN_POINT('',(1.975,6.575,-7.881448674684)); +#115906 = LINE('',#115907,#115908); +#115907 = CARTESIAN_POINT('',(-1.975,6.575,-7.881448674684)); +#115908 = VECTOR('',#115909,1.); +#115909 = DIRECTION('',(1.,0.,0.)); +#115910 = ORIENTED_EDGE('',*,*,#115911,.T.); +#115911 = EDGE_CURVE('',#115902,#115912,#115914,.T.); +#115912 = VERTEX_POINT('',#115913); +#115913 = CARTESIAN_POINT('',(-1.975,6.575,-11.2)); +#115914 = LINE('',#115915,#115916); +#115915 = CARTESIAN_POINT('',(-1.975,6.575,-7.881448674684)); +#115916 = VECTOR('',#115917,1.); +#115917 = DIRECTION('',(0.,0.,-1.)); +#115918 = ORIENTED_EDGE('',*,*,#115919,.F.); +#115919 = EDGE_CURVE('',#115920,#115912,#115922,.T.); +#115920 = VERTEX_POINT('',#115921); +#115921 = CARTESIAN_POINT('',(-3.375,6.575,-11.2)); +#115922 = LINE('',#115923,#115924); +#115923 = CARTESIAN_POINT('',(-3.375,6.575,-11.2)); +#115924 = VECTOR('',#115925,1.); +#115925 = DIRECTION('',(1.,0.,0.)); +#115926 = ORIENTED_EDGE('',*,*,#115927,.F.); +#115927 = EDGE_CURVE('',#115928,#115920,#115930,.T.); +#115928 = VERTEX_POINT('',#115929); +#115929 = CARTESIAN_POINT('',(-3.375,6.575,-9.281273756922)); +#115930 = LINE('',#115931,#115932); +#115931 = CARTESIAN_POINT('',(-3.375,6.575,-9.281273756922)); +#115932 = VECTOR('',#115933,1.); +#115933 = DIRECTION('',(0.,0.,-1.)); +#115934 = ORIENTED_EDGE('',*,*,#115935,.F.); +#115935 = EDGE_CURVE('',#115936,#115928,#115938,.T.); +#115936 = VERTEX_POINT('',#115937); +#115937 = CARTESIAN_POINT('',(-4.575,6.575,-9.281273756922)); +#115938 = LINE('',#115939,#115940); +#115939 = CARTESIAN_POINT('',(-4.575,6.575,-9.281273756922)); +#115940 = VECTOR('',#115941,1.); +#115941 = DIRECTION('',(1.,0.,0.)); +#115942 = ORIENTED_EDGE('',*,*,#115943,.T.); +#115943 = EDGE_CURVE('',#115936,#115944,#115946,.T.); +#115944 = VERTEX_POINT('',#115945); +#115945 = CARTESIAN_POINT('',(-4.575,6.575,-10.7553)); +#115946 = LINE('',#115947,#115948); +#115947 = CARTESIAN_POINT('',(-4.575,6.575,-9.281273756922)); +#115948 = VECTOR('',#115949,1.); +#115949 = DIRECTION('',(0.,0.,-1.)); +#115950 = ORIENTED_EDGE('',*,*,#115951,.T.); +#115951 = EDGE_CURVE('',#115944,#115952,#115954,.T.); +#115952 = VERTEX_POINT('',#115953); +#115953 = CARTESIAN_POINT('',(-5.975,6.575,-10.7553)); +#115954 = LINE('',#115955,#115956); +#115955 = CARTESIAN_POINT('',(-4.575,6.575,-10.7553)); +#115956 = VECTOR('',#115957,1.); +#115957 = DIRECTION('',(-1.,0.,0.)); +#115958 = ORIENTED_EDGE('',*,*,#115959,.T.); +#115959 = EDGE_CURVE('',#115952,#115960,#115962,.T.); +#115960 = VERTEX_POINT('',#115961); +#115961 = CARTESIAN_POINT('',(-6.575,6.575,-10.7553)); +#115962 = LINE('',#115963,#115964); +#115963 = CARTESIAN_POINT('',(-5.975,6.575,-10.7553)); +#115964 = VECTOR('',#115965,1.); +#115965 = DIRECTION('',(-1.,0.,0.)); +#115966 = ORIENTED_EDGE('',*,*,#115967,.T.); +#115967 = EDGE_CURVE('',#115960,#115968,#115970,.T.); +#115968 = VERTEX_POINT('',#115969); +#115969 = CARTESIAN_POINT('',(-6.575,6.575,-5.8208)); +#115970 = LINE('',#115971,#115972); +#115971 = CARTESIAN_POINT('',(-6.575,6.575,-10.7553)); +#115972 = VECTOR('',#115973,1.); +#115973 = DIRECTION('',(0.,0.,1.)); +#115974 = ORIENTED_EDGE('',*,*,#115975,.T.); +#115975 = EDGE_CURVE('',#115968,#115976,#115978,.T.); +#115976 = VERTEX_POINT('',#115977); +#115977 = CARTESIAN_POINT('',(-5.975,6.575,-5.8208)); +#115978 = LINE('',#115979,#115980); +#115979 = CARTESIAN_POINT('',(-6.575,6.575,-5.8208)); +#115980 = VECTOR('',#115981,1.); +#115981 = DIRECTION('',(1.,0.,0.)); +#115982 = ORIENTED_EDGE('',*,*,#115983,.T.); +#115983 = EDGE_CURVE('',#115976,#115984,#115986,.T.); +#115984 = VERTEX_POINT('',#115985); +#115985 = CARTESIAN_POINT('',(-5.975,6.575,-1.2)); +#115986 = LINE('',#115987,#115988); +#115987 = CARTESIAN_POINT('',(-5.975,6.575,-5.8208)); +#115988 = VECTOR('',#115989,1.); +#115989 = DIRECTION('',(0.,0.,1.)); +#115990 = ORIENTED_EDGE('',*,*,#115991,.T.); +#115991 = EDGE_CURVE('',#115984,#115992,#115994,.T.); +#115992 = VERTEX_POINT('',#115993); +#115993 = CARTESIAN_POINT('',(-5.609475380552,6.575,-0.377569606242)); +#115994 = LINE('',#115995,#115996); +#115995 = CARTESIAN_POINT('',(-5.975,6.575,-1.2)); +#115996 = VECTOR('',#115997,1.); +#115997 = DIRECTION('',(0.406138466053,0.,0.91381154862)); +#115998 = ORIENTED_EDGE('',*,*,#115999,.T.); +#115999 = EDGE_CURVE('',#115992,#116000,#116002,.T.); +#116000 = VERTEX_POINT('',#116001); +#116001 = CARTESIAN_POINT('',(-5.575,6.575,-0.21511421982)); +#116002 = CIRCLE('',#116003,0.4); +#116003 = AXIS2_PLACEMENT_3D('',#116004,#116005,#116006); +#116004 = CARTESIAN_POINT('',(-5.975,6.575,-0.21511421982)); +#116005 = DIRECTION('',(0.,-1.,0.)); +#116006 = DIRECTION('',(0.91381154862,0.,-0.406138466053)); +#116007 = ORIENTED_EDGE('',*,*,#116008,.T.); +#116008 = EDGE_CURVE('',#116000,#104830,#116009,.T.); +#116009 = LINE('',#116010,#116011); +#116010 = CARTESIAN_POINT('',(-5.575,6.575,-0.21511421982)); +#116011 = VECTOR('',#116012,1.); +#116012 = DIRECTION('',(0.,0.,1.)); +#116013 = ORIENTED_EDGE('',*,*,#115649,.F.); +#116014 = ORIENTED_EDGE('',*,*,#116015,.T.); +#116015 = EDGE_CURVE('',#115640,#115839,#116016,.T.); +#116016 = CIRCLE('',#116017,0.15); +#116017 = AXIS2_PLACEMENT_3D('',#116018,#116019,#116020); +#116018 = CARTESIAN_POINT('',(-4.15,6.575,5.E-02)); +#116019 = DIRECTION('',(0.,-1.,0.)); +#116020 = DIRECTION('',(-0.942809041582,-0.,-0.333333333333)); +#116021 = ORIENTED_EDGE('',*,*,#115836,.F.); +#116022 = ORIENTED_EDGE('',*,*,#116023,.T.); +#116023 = EDGE_CURVE('',#115837,#115576,#116024,.T.); +#116024 = CIRCLE('',#116025,0.15); +#116025 = AXIS2_PLACEMENT_3D('',#116026,#116027,#116028); +#116026 = CARTESIAN_POINT('',(-2.95,6.575,5.E-02)); +#116027 = DIRECTION('',(0.,-1.,0.)); +#116028 = DIRECTION('',(2.312964634636E-14,0.,-1.)); +#116029 = ORIENTED_EDGE('',*,*,#115614,.F.); +#116030 = ORIENTED_EDGE('',*,*,#115790,.T.); +#116031 = ORIENTED_EDGE('',*,*,#115805,.F.); +#116032 = ORIENTED_EDGE('',*,*,#115877,.T.); +#116033 = ORIENTED_EDGE('',*,*,#115542,.F.); +#116034 = ORIENTED_EDGE('',*,*,#116035,.T.); +#116035 = EDGE_CURVE('',#104955,#116036,#116038,.T.); +#116036 = VERTEX_POINT('',#116037); +#116037 = CARTESIAN_POINT('',(5.575,6.575,-0.21511421982)); +#116038 = LINE('',#116039,#116040); +#116039 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#116040 = VECTOR('',#116041,1.); +#116041 = DIRECTION('',(-1.23866068051E-14,-2.064434467516E-14,-1.)); +#116042 = ORIENTED_EDGE('',*,*,#116043,.T.); +#116043 = EDGE_CURVE('',#116036,#116044,#116046,.T.); +#116044 = VERTEX_POINT('',#116045); +#116045 = CARTESIAN_POINT('',(5.609475380552,6.575,-0.377569606242)); +#116046 = CIRCLE('',#116047,0.4); +#116047 = AXIS2_PLACEMENT_3D('',#116048,#116049,#116050); +#116048 = CARTESIAN_POINT('',(5.975,6.575,-0.21511421982)); +#116049 = DIRECTION('',(0.,-1.,0.)); +#116050 = DIRECTION('',(-1.,0.,0.)); +#116051 = ORIENTED_EDGE('',*,*,#116052,.T.); +#116052 = EDGE_CURVE('',#116044,#116053,#116055,.T.); +#116053 = VERTEX_POINT('',#116054); +#116054 = CARTESIAN_POINT('',(5.975,6.575,-1.2)); +#116055 = LINE('',#116056,#116057); +#116056 = CARTESIAN_POINT('',(5.609475380552,6.575,-0.377569606242)); +#116057 = VECTOR('',#116058,1.); +#116058 = DIRECTION('',(0.406138466053,0.,-0.91381154862)); +#116059 = ORIENTED_EDGE('',*,*,#116060,.T.); +#116060 = EDGE_CURVE('',#116053,#116061,#116063,.T.); +#116061 = VERTEX_POINT('',#116062); +#116062 = CARTESIAN_POINT('',(5.975,6.575,-5.8208)); +#116063 = LINE('',#116064,#116065); +#116064 = CARTESIAN_POINT('',(5.975,6.575,-1.2)); +#116065 = VECTOR('',#116066,1.); +#116066 = DIRECTION('',(0.,0.,-1.)); +#116067 = ORIENTED_EDGE('',*,*,#116068,.T.); +#116068 = EDGE_CURVE('',#116061,#116069,#116071,.T.); +#116069 = VERTEX_POINT('',#116070); +#116070 = CARTESIAN_POINT('',(6.575,6.575,-5.8208)); +#116071 = LINE('',#116072,#116073); +#116072 = CARTESIAN_POINT('',(5.975,6.575,-5.8208)); +#116073 = VECTOR('',#116074,1.); +#116074 = DIRECTION('',(1.,0.,0.)); +#116075 = ORIENTED_EDGE('',*,*,#116076,.T.); +#116076 = EDGE_CURVE('',#116069,#116077,#116079,.T.); +#116077 = VERTEX_POINT('',#116078); +#116078 = CARTESIAN_POINT('',(6.575,6.575,-10.7553)); +#116079 = LINE('',#116080,#116081); +#116080 = CARTESIAN_POINT('',(6.575,6.575,-5.8208)); +#116081 = VECTOR('',#116082,1.); +#116082 = DIRECTION('',(0.,0.,-1.)); +#116083 = ORIENTED_EDGE('',*,*,#116084,.T.); +#116084 = EDGE_CURVE('',#116077,#116085,#116087,.T.); +#116085 = VERTEX_POINT('',#116086); +#116086 = CARTESIAN_POINT('',(5.975,6.575,-10.7553)); +#116087 = LINE('',#116088,#116089); +#116088 = CARTESIAN_POINT('',(6.575,6.575,-10.7553)); +#116089 = VECTOR('',#116090,1.); +#116090 = DIRECTION('',(-1.,0.,0.)); +#116091 = ORIENTED_EDGE('',*,*,#116092,.T.); +#116092 = EDGE_CURVE('',#116085,#116093,#116095,.T.); +#116093 = VERTEX_POINT('',#116094); +#116094 = CARTESIAN_POINT('',(4.575,6.575,-10.7553)); +#116095 = LINE('',#116096,#116097); +#116096 = CARTESIAN_POINT('',(5.975,6.575,-10.7553)); +#116097 = VECTOR('',#116098,1.); +#116098 = DIRECTION('',(-1.,0.,0.)); +#116099 = ORIENTED_EDGE('',*,*,#116100,.T.); +#116100 = EDGE_CURVE('',#116093,#116101,#116103,.T.); +#116101 = VERTEX_POINT('',#116102); +#116102 = CARTESIAN_POINT('',(4.575,6.575,-9.281273756922)); +#116103 = LINE('',#116104,#116105); +#116104 = CARTESIAN_POINT('',(4.575,6.575,-10.7553)); +#116105 = VECTOR('',#116106,1.); +#116106 = DIRECTION('',(0.,0.,1.)); +#116107 = ORIENTED_EDGE('',*,*,#116108,.F.); +#116108 = EDGE_CURVE('',#116109,#116101,#116111,.T.); +#116109 = VERTEX_POINT('',#116110); +#116110 = CARTESIAN_POINT('',(3.375,6.575,-9.281273756922)); +#116111 = LINE('',#116112,#116113); +#116112 = CARTESIAN_POINT('',(3.375,6.575,-9.281273756922)); +#116113 = VECTOR('',#116114,1.); +#116114 = DIRECTION('',(1.,0.,0.)); +#116115 = ORIENTED_EDGE('',*,*,#116116,.T.); +#116116 = EDGE_CURVE('',#116109,#116117,#116119,.T.); +#116117 = VERTEX_POINT('',#116118); +#116118 = CARTESIAN_POINT('',(3.375,6.575,-11.2)); +#116119 = LINE('',#116120,#116121); +#116120 = CARTESIAN_POINT('',(3.375,6.575,-9.281273756922)); +#116121 = VECTOR('',#116122,1.); +#116122 = DIRECTION('',(0.,0.,-1.)); +#116123 = ORIENTED_EDGE('',*,*,#116124,.F.); +#116124 = EDGE_CURVE('',#116125,#116117,#116127,.T.); +#116125 = VERTEX_POINT('',#116126); +#116126 = CARTESIAN_POINT('',(1.975,6.575,-11.2)); +#116127 = LINE('',#116128,#116129); +#116128 = CARTESIAN_POINT('',(1.975,6.575,-11.2)); +#116129 = VECTOR('',#116130,1.); +#116130 = DIRECTION('',(1.,0.,0.)); +#116131 = ORIENTED_EDGE('',*,*,#116132,.T.); +#116132 = EDGE_CURVE('',#116125,#115904,#116133,.T.); +#116133 = LINE('',#116134,#116135); +#116134 = CARTESIAN_POINT('',(1.975,6.575,-11.2)); +#116135 = VECTOR('',#116136,1.); +#116136 = DIRECTION('',(0.,0.,1.)); +#116137 = PLANE('',#116138); +#116138 = AXIS2_PLACEMENT_3D('',#116139,#116140,#116141); +#116139 = CARTESIAN_POINT('',(5.575,6.575,0.)); +#116140 = DIRECTION('',(-0.,1.,0.)); +#116141 = DIRECTION('',(1.,0.,0.)); +#116142 = ADVANCED_FACE('',(#116143),#116168,.F.); +#116143 = FACE_BOUND('',#116144,.T.); +#116144 = EDGE_LOOP('',(#116145,#116153,#116154,#116162)); +#116145 = ORIENTED_EDGE('',*,*,#116146,.F.); +#116146 = EDGE_CURVE('',#115904,#116147,#116149,.T.); +#116147 = VERTEX_POINT('',#116148); +#116148 = CARTESIAN_POINT('',(1.975,6.075,-7.881448674684)); +#116149 = LINE('',#116150,#116151); +#116150 = CARTESIAN_POINT('',(1.975,6.575,-7.881448674684)); +#116151 = VECTOR('',#116152,1.); +#116152 = DIRECTION('',(0.,-1.,0.)); +#116153 = ORIENTED_EDGE('',*,*,#116132,.F.); +#116154 = ORIENTED_EDGE('',*,*,#116155,.F.); +#116155 = EDGE_CURVE('',#116156,#116125,#116158,.T.); +#116156 = VERTEX_POINT('',#116157); +#116157 = CARTESIAN_POINT('',(1.975,6.075,-11.2)); +#116158 = LINE('',#116159,#116160); +#116159 = CARTESIAN_POINT('',(1.975,6.075,-11.2)); +#116160 = VECTOR('',#116161,1.); +#116161 = DIRECTION('',(0.,1.,0.)); +#116162 = ORIENTED_EDGE('',*,*,#116163,.F.); +#116163 = EDGE_CURVE('',#116147,#116156,#116164,.T.); +#116164 = LINE('',#116165,#116166); +#116165 = CARTESIAN_POINT('',(1.975,6.075,-7.881448674684)); +#116166 = VECTOR('',#116167,1.); +#116167 = DIRECTION('',(0.,0.,-1.)); +#116168 = PLANE('',#116169); +#116169 = AXIS2_PLACEMENT_3D('',#116170,#116171,#116172); +#116170 = CARTESIAN_POINT('',(1.975,6.575,-7.881448674684)); +#116171 = DIRECTION('',(1.,0.,0.)); +#116172 = DIRECTION('',(-0.,1.,0.)); +#116173 = ADVANCED_FACE('',(#116174),#116456,.F.); +#116174 = FACE_BOUND('',#116175,.T.); +#116175 = EDGE_LOOP('',(#116176,#116186,#116194,#116202,#116210,#116219, + #116227,#116235,#116243,#116251,#116259,#116268,#116274,#116275, + #116276,#116277,#116278,#116279,#116280,#116281,#116289,#116296, + #116297,#116306,#116312,#116313,#116321,#116330,#116338,#116346, + #116354,#116362,#116370,#116379,#116387,#116395,#116403,#116411, + #116419,#116427,#116435,#116441,#116442,#116450)); +#116176 = ORIENTED_EDGE('',*,*,#116177,.T.); +#116177 = EDGE_CURVE('',#116178,#116180,#116182,.T.); +#116178 = VERTEX_POINT('',#116179); +#116179 = CARTESIAN_POINT('',(3.375,6.075,-9.281273756922)); +#116180 = VERTEX_POINT('',#116181); +#116181 = CARTESIAN_POINT('',(4.575,6.075,-9.281273756922)); +#116182 = LINE('',#116183,#116184); +#116183 = CARTESIAN_POINT('',(3.375,6.075,-9.281273756922)); +#116184 = VECTOR('',#116185,1.); +#116185 = DIRECTION('',(1.,0.,0.)); +#116186 = ORIENTED_EDGE('',*,*,#116187,.T.); +#116187 = EDGE_CURVE('',#116180,#116188,#116190,.T.); +#116188 = VERTEX_POINT('',#116189); +#116189 = CARTESIAN_POINT('',(4.575,6.075,-10.7553)); +#116190 = LINE('',#116191,#116192); +#116191 = CARTESIAN_POINT('',(4.575,6.075,-9.281273756922)); +#116192 = VECTOR('',#116193,1.); +#116193 = DIRECTION('',(0.,0.,-1.)); +#116194 = ORIENTED_EDGE('',*,*,#116195,.F.); +#116195 = EDGE_CURVE('',#116196,#116188,#116198,.T.); +#116196 = VERTEX_POINT('',#116197); +#116197 = CARTESIAN_POINT('',(5.775,6.075,-10.7553)); +#116198 = LINE('',#116199,#116200); +#116199 = CARTESIAN_POINT('',(5.775,6.075,-10.7553)); +#116200 = VECTOR('',#116201,1.); +#116201 = DIRECTION('',(-1.,0.,0.)); +#116202 = ORIENTED_EDGE('',*,*,#116203,.F.); +#116203 = EDGE_CURVE('',#116204,#116196,#116206,.T.); +#116204 = VERTEX_POINT('',#116205); +#116205 = CARTESIAN_POINT('',(5.775,6.075,-10.9553)); +#116206 = LINE('',#116207,#116208); +#116207 = CARTESIAN_POINT('',(5.775,6.075,-10.9553)); +#116208 = VECTOR('',#116209,1.); +#116209 = DIRECTION('',(0.,0.,1.)); +#116210 = ORIENTED_EDGE('',*,*,#116211,.T.); +#116211 = EDGE_CURVE('',#116204,#116212,#116214,.T.); +#116212 = VERTEX_POINT('',#116213); +#116213 = CARTESIAN_POINT('',(5.975,6.075,-10.7553)); +#116214 = CIRCLE('',#116215,0.2); +#116215 = AXIS2_PLACEMENT_3D('',#116216,#116217,#116218); +#116216 = CARTESIAN_POINT('',(5.975,6.075,-10.9553)); +#116217 = DIRECTION('',(0.,1.,0.)); +#116218 = DIRECTION('',(-1.,0.,-1.734723475977E-14)); +#116219 = ORIENTED_EDGE('',*,*,#116220,.F.); +#116220 = EDGE_CURVE('',#116221,#116212,#116223,.T.); +#116221 = VERTEX_POINT('',#116222); +#116222 = CARTESIAN_POINT('',(6.575,6.075,-10.7553)); +#116223 = LINE('',#116224,#116225); +#116224 = CARTESIAN_POINT('',(6.575,6.075,-10.7553)); +#116225 = VECTOR('',#116226,1.); +#116226 = DIRECTION('',(-1.,0.,0.)); +#116227 = ORIENTED_EDGE('',*,*,#116228,.F.); +#116228 = EDGE_CURVE('',#116229,#116221,#116231,.T.); +#116229 = VERTEX_POINT('',#116230); +#116230 = CARTESIAN_POINT('',(6.575,6.075,-5.8208)); +#116231 = LINE('',#116232,#116233); +#116232 = CARTESIAN_POINT('',(6.575,6.075,-5.8208)); +#116233 = VECTOR('',#116234,1.); +#116234 = DIRECTION('',(0.,0.,-1.)); +#116235 = ORIENTED_EDGE('',*,*,#116236,.F.); +#116236 = EDGE_CURVE('',#116237,#116229,#116239,.T.); +#116237 = VERTEX_POINT('',#116238); +#116238 = CARTESIAN_POINT('',(5.975,6.075,-5.8208)); +#116239 = LINE('',#116240,#116241); +#116240 = CARTESIAN_POINT('',(5.975,6.075,-5.8208)); +#116241 = VECTOR('',#116242,1.); +#116242 = DIRECTION('',(1.,0.,0.)); +#116243 = ORIENTED_EDGE('',*,*,#116244,.F.); +#116244 = EDGE_CURVE('',#116245,#116237,#116247,.T.); +#116245 = VERTEX_POINT('',#116246); +#116246 = CARTESIAN_POINT('',(5.975,6.075,-1.2)); +#116247 = LINE('',#116248,#116249); +#116248 = CARTESIAN_POINT('',(5.975,6.075,-1.2)); +#116249 = VECTOR('',#116250,1.); +#116250 = DIRECTION('',(0.,0.,-1.)); +#116251 = ORIENTED_EDGE('',*,*,#116252,.F.); +#116252 = EDGE_CURVE('',#116253,#116245,#116255,.T.); +#116253 = VERTEX_POINT('',#116254); +#116254 = CARTESIAN_POINT('',(5.609475380552,6.075,-0.377569606242)); +#116255 = LINE('',#116256,#116257); +#116256 = CARTESIAN_POINT('',(5.609475380552,6.075,-0.377569606242)); +#116257 = VECTOR('',#116258,1.); +#116258 = DIRECTION('',(0.406138466053,0.,-0.91381154862)); +#116259 = ORIENTED_EDGE('',*,*,#116260,.T.); +#116260 = EDGE_CURVE('',#116253,#116261,#116263,.T.); +#116261 = VERTEX_POINT('',#116262); +#116262 = CARTESIAN_POINT('',(5.575,6.075,-0.21511421982)); +#116263 = CIRCLE('',#116264,0.4); +#116264 = AXIS2_PLACEMENT_3D('',#116265,#116266,#116267); +#116265 = CARTESIAN_POINT('',(5.975,6.075,-0.21511421982)); +#116266 = DIRECTION('',(0.,1.,0.)); +#116267 = DIRECTION('',(-0.91381154862,0.,-0.406138466053)); +#116268 = ORIENTED_EDGE('',*,*,#116269,.F.); +#116269 = EDGE_CURVE('',#104947,#116261,#116270,.T.); +#116270 = LINE('',#116271,#116272); +#116271 = CARTESIAN_POINT('',(5.575,6.075,0.)); +#116272 = VECTOR('',#116273,1.); +#116273 = DIRECTION('',(0.,0.,-1.)); +#116274 = ORIENTED_EDGE('',*,*,#104946,.F.); +#116275 = ORIENTED_EDGE('',*,*,#115673,.F.); +#116276 = ORIENTED_EDGE('',*,*,#115886,.T.); +#116277 = ORIENTED_EDGE('',*,*,#115814,.T.); +#116278 = ORIENTED_EDGE('',*,*,#115781,.T.); +#116279 = ORIENTED_EDGE('',*,*,#115746,.T.); +#116280 = ORIENTED_EDGE('',*,*,#104896,.F.); +#116281 = ORIENTED_EDGE('',*,*,#116282,.F.); +#116282 = EDGE_CURVE('',#116283,#104889,#116285,.T.); +#116283 = VERTEX_POINT('',#116284); +#116284 = CARTESIAN_POINT('',(-2.8,6.075,5.E-02)); +#116285 = LINE('',#116286,#116287); +#116286 = CARTESIAN_POINT('',(-2.8,6.075,5.E-02)); +#116287 = VECTOR('',#116288,1.); +#116288 = DIRECTION('',(0.,1.7763568394E-14,-1.)); +#116289 = ORIENTED_EDGE('',*,*,#116290,.T.); +#116290 = EDGE_CURVE('',#116283,#115855,#116291,.T.); +#116291 = CIRCLE('',#116292,0.15); +#116292 = AXIS2_PLACEMENT_3D('',#116293,#116294,#116295); +#116293 = CARTESIAN_POINT('',(-2.95,6.075,5.E-02)); +#116294 = DIRECTION('',(0.,1.,0.)); +#116295 = DIRECTION('',(1.,-0.,5.06864515637E-14)); +#116296 = ORIENTED_EDGE('',*,*,#115854,.T.); +#116297 = ORIENTED_EDGE('',*,*,#116298,.T.); +#116298 = EDGE_CURVE('',#115847,#116299,#116301,.T.); +#116299 = VERTEX_POINT('',#116300); +#116300 = CARTESIAN_POINT('',(-4.3,6.075,5.E-02)); +#116301 = CIRCLE('',#116302,0.15); +#116302 = AXIS2_PLACEMENT_3D('',#116303,#116304,#116305); +#116303 = CARTESIAN_POINT('',(-4.15,6.075,5.E-02)); +#116304 = DIRECTION('',(0.,1.,0.)); +#116305 = DIRECTION('',(-2.312964634636E-14,0.,-1.)); +#116306 = ORIENTED_EDGE('',*,*,#116307,.T.); +#116307 = EDGE_CURVE('',#116299,#104847,#116308,.T.); +#116308 = LINE('',#116309,#116310); +#116309 = CARTESIAN_POINT('',(-4.3,6.075,5.E-02)); +#116310 = VECTOR('',#116311,1.); +#116311 = DIRECTION('',(-1.7763568394E-14,0.,-1.)); +#116312 = ORIENTED_EDGE('',*,*,#104846,.F.); +#116313 = ORIENTED_EDGE('',*,*,#116314,.F.); +#116314 = EDGE_CURVE('',#116315,#104839,#116317,.T.); +#116315 = VERTEX_POINT('',#116316); +#116316 = CARTESIAN_POINT('',(-5.575,6.075,-0.21511421982)); +#116317 = LINE('',#116318,#116319); +#116318 = CARTESIAN_POINT('',(-5.575,6.075,-0.21511421982)); +#116319 = VECTOR('',#116320,1.); +#116320 = DIRECTION('',(0.,0.,1.)); +#116321 = ORIENTED_EDGE('',*,*,#116322,.T.); +#116322 = EDGE_CURVE('',#116315,#116323,#116325,.T.); +#116323 = VERTEX_POINT('',#116324); +#116324 = CARTESIAN_POINT('',(-5.609475380552,6.075,-0.377569606242)); +#116325 = CIRCLE('',#116326,0.4); +#116326 = AXIS2_PLACEMENT_3D('',#116327,#116328,#116329); +#116327 = CARTESIAN_POINT('',(-5.975,6.075,-0.21511421982)); +#116328 = DIRECTION('',(-0.,1.,0.)); +#116329 = DIRECTION('',(1.,0.,0.)); +#116330 = ORIENTED_EDGE('',*,*,#116331,.F.); +#116331 = EDGE_CURVE('',#116332,#116323,#116334,.T.); +#116332 = VERTEX_POINT('',#116333); +#116333 = CARTESIAN_POINT('',(-5.975,6.075,-1.2)); +#116334 = LINE('',#116335,#116336); +#116335 = CARTESIAN_POINT('',(-5.975,6.075,-1.2)); +#116336 = VECTOR('',#116337,1.); +#116337 = DIRECTION('',(0.406138466053,0.,0.91381154862)); +#116338 = ORIENTED_EDGE('',*,*,#116339,.F.); +#116339 = EDGE_CURVE('',#116340,#116332,#116342,.T.); +#116340 = VERTEX_POINT('',#116341); +#116341 = CARTESIAN_POINT('',(-5.975,6.075,-5.8208)); +#116342 = LINE('',#116343,#116344); +#116343 = CARTESIAN_POINT('',(-5.975,6.075,-5.8208)); +#116344 = VECTOR('',#116345,1.); +#116345 = DIRECTION('',(0.,0.,1.)); +#116346 = ORIENTED_EDGE('',*,*,#116347,.F.); +#116347 = EDGE_CURVE('',#116348,#116340,#116350,.T.); +#116348 = VERTEX_POINT('',#116349); +#116349 = CARTESIAN_POINT('',(-6.575,6.075,-5.8208)); +#116350 = LINE('',#116351,#116352); +#116351 = CARTESIAN_POINT('',(-6.575,6.075,-5.8208)); +#116352 = VECTOR('',#116353,1.); +#116353 = DIRECTION('',(1.,0.,0.)); +#116354 = ORIENTED_EDGE('',*,*,#116355,.F.); +#116355 = EDGE_CURVE('',#116356,#116348,#116358,.T.); +#116356 = VERTEX_POINT('',#116357); +#116357 = CARTESIAN_POINT('',(-6.575,6.075,-10.7553)); +#116358 = LINE('',#116359,#116360); +#116359 = CARTESIAN_POINT('',(-6.575,6.075,-10.7553)); +#116360 = VECTOR('',#116361,1.); +#116361 = DIRECTION('',(0.,0.,1.)); +#116362 = ORIENTED_EDGE('',*,*,#116363,.F.); +#116363 = EDGE_CURVE('',#116364,#116356,#116366,.T.); +#116364 = VERTEX_POINT('',#116365); +#116365 = CARTESIAN_POINT('',(-5.975,6.075,-10.7553)); +#116366 = LINE('',#116367,#116368); +#116367 = CARTESIAN_POINT('',(-5.975,6.075,-10.7553)); +#116368 = VECTOR('',#116369,1.); +#116369 = DIRECTION('',(-1.,0.,0.)); +#116370 = ORIENTED_EDGE('',*,*,#116371,.T.); +#116371 = EDGE_CURVE('',#116364,#116372,#116374,.T.); +#116372 = VERTEX_POINT('',#116373); +#116373 = CARTESIAN_POINT('',(-5.775,6.075,-10.9553)); +#116374 = CIRCLE('',#116375,0.2); +#116375 = AXIS2_PLACEMENT_3D('',#116376,#116377,#116378); +#116376 = CARTESIAN_POINT('',(-5.975,6.075,-10.9553)); +#116377 = DIRECTION('',(0.,1.,0.)); +#116378 = DIRECTION('',(0.,-0.,1.)); +#116379 = ORIENTED_EDGE('',*,*,#116380,.T.); +#116380 = EDGE_CURVE('',#116372,#116381,#116383,.T.); +#116381 = VERTEX_POINT('',#116382); +#116382 = CARTESIAN_POINT('',(-5.775,6.075,-10.7553)); +#116383 = LINE('',#116384,#116385); +#116384 = CARTESIAN_POINT('',(-5.775,6.075,-10.9553)); +#116385 = VECTOR('',#116386,1.); +#116386 = DIRECTION('',(-1.33226762955E-14,0.,1.)); +#116387 = ORIENTED_EDGE('',*,*,#116388,.F.); +#116388 = EDGE_CURVE('',#116389,#116381,#116391,.T.); +#116389 = VERTEX_POINT('',#116390); +#116390 = CARTESIAN_POINT('',(-4.575,6.075,-10.7553)); +#116391 = LINE('',#116392,#116393); +#116392 = CARTESIAN_POINT('',(-4.575,6.075,-10.7553)); +#116393 = VECTOR('',#116394,1.); +#116394 = DIRECTION('',(-1.,0.,0.)); +#116395 = ORIENTED_EDGE('',*,*,#116396,.T.); +#116396 = EDGE_CURVE('',#116389,#116397,#116399,.T.); +#116397 = VERTEX_POINT('',#116398); +#116398 = CARTESIAN_POINT('',(-4.575,6.075,-9.281273756922)); +#116399 = LINE('',#116400,#116401); +#116400 = CARTESIAN_POINT('',(-4.575,6.075,-10.7553)); +#116401 = VECTOR('',#116402,1.); +#116402 = DIRECTION('',(0.,0.,1.)); +#116403 = ORIENTED_EDGE('',*,*,#116404,.T.); +#116404 = EDGE_CURVE('',#116397,#116405,#116407,.T.); +#116405 = VERTEX_POINT('',#116406); +#116406 = CARTESIAN_POINT('',(-3.375,6.075,-9.281273756922)); +#116407 = LINE('',#116408,#116409); +#116408 = CARTESIAN_POINT('',(-4.575,6.075,-9.281273756922)); +#116409 = VECTOR('',#116410,1.); +#116410 = DIRECTION('',(1.,0.,0.)); +#116411 = ORIENTED_EDGE('',*,*,#116412,.F.); +#116412 = EDGE_CURVE('',#116413,#116405,#116415,.T.); +#116413 = VERTEX_POINT('',#116414); +#116414 = CARTESIAN_POINT('',(-3.375,6.075,-11.2)); +#116415 = LINE('',#116416,#116417); +#116416 = CARTESIAN_POINT('',(-3.375,6.075,-11.2)); +#116417 = VECTOR('',#116418,1.); +#116418 = DIRECTION('',(0.,0.,1.)); +#116419 = ORIENTED_EDGE('',*,*,#116420,.F.); +#116420 = EDGE_CURVE('',#116421,#116413,#116423,.T.); +#116421 = VERTEX_POINT('',#116422); +#116422 = CARTESIAN_POINT('',(-1.975,6.075,-11.2)); +#116423 = LINE('',#116424,#116425); +#116424 = CARTESIAN_POINT('',(-1.975,6.075,-11.2)); +#116425 = VECTOR('',#116426,1.); +#116426 = DIRECTION('',(-1.,0.,0.)); +#116427 = ORIENTED_EDGE('',*,*,#116428,.F.); +#116428 = EDGE_CURVE('',#116429,#116421,#116431,.T.); +#116429 = VERTEX_POINT('',#116430); +#116430 = CARTESIAN_POINT('',(-1.975,6.075,-7.881448674684)); +#116431 = LINE('',#116432,#116433); +#116432 = CARTESIAN_POINT('',(-1.975,6.075,-7.881448674684)); +#116433 = VECTOR('',#116434,1.); +#116434 = DIRECTION('',(0.,0.,-1.)); +#116435 = ORIENTED_EDGE('',*,*,#116436,.T.); +#116436 = EDGE_CURVE('',#116429,#116147,#116437,.T.); +#116437 = LINE('',#116438,#116439); +#116438 = CARTESIAN_POINT('',(-1.975,6.075,-7.881448674684)); +#116439 = VECTOR('',#116440,1.); +#116440 = DIRECTION('',(1.,0.,0.)); +#116441 = ORIENTED_EDGE('',*,*,#116163,.T.); +#116442 = ORIENTED_EDGE('',*,*,#116443,.F.); +#116443 = EDGE_CURVE('',#116444,#116156,#116446,.T.); +#116444 = VERTEX_POINT('',#116445); +#116445 = CARTESIAN_POINT('',(3.375,6.075,-11.2)); +#116446 = LINE('',#116447,#116448); +#116447 = CARTESIAN_POINT('',(3.375,6.075,-11.2)); +#116448 = VECTOR('',#116449,1.); +#116449 = DIRECTION('',(-1.,0.,0.)); +#116450 = ORIENTED_EDGE('',*,*,#116451,.T.); +#116451 = EDGE_CURVE('',#116444,#116178,#116452,.T.); +#116452 = LINE('',#116453,#116454); +#116453 = CARTESIAN_POINT('',(3.375,6.075,-11.2)); +#116454 = VECTOR('',#116455,1.); +#116455 = DIRECTION('',(0.,0.,1.)); +#116456 = PLANE('',#116457); +#116457 = AXIS2_PLACEMENT_3D('',#116458,#116459,#116460); +#116458 = CARTESIAN_POINT('',(0.,6.075,0.)); +#116459 = DIRECTION('',(-0.,1.,0.)); +#116460 = DIRECTION('',(1.,0.,0.)); +#116461 = ADVANCED_FACE('',(#116462),#116478,.F.); +#116462 = FACE_BOUND('',#116463,.T.); +#116463 = EDGE_LOOP('',(#116464,#116470,#116471,#116477)); +#116464 = ORIENTED_EDGE('',*,*,#116465,.T.); +#116465 = EDGE_CURVE('',#116109,#116178,#116466,.T.); +#116466 = LINE('',#116467,#116468); +#116467 = CARTESIAN_POINT('',(3.375,6.575,-9.281273756922)); +#116468 = VECTOR('',#116469,1.); +#116469 = DIRECTION('',(0.,-1.,0.)); +#116470 = ORIENTED_EDGE('',*,*,#116451,.F.); +#116471 = ORIENTED_EDGE('',*,*,#116472,.F.); +#116472 = EDGE_CURVE('',#116117,#116444,#116473,.T.); +#116473 = LINE('',#116474,#116475); +#116474 = CARTESIAN_POINT('',(3.375,6.575,-11.2)); +#116475 = VECTOR('',#116476,1.); +#116476 = DIRECTION('',(0.,-1.,0.)); +#116477 = ORIENTED_EDGE('',*,*,#116116,.F.); +#116478 = PLANE('',#116479); +#116479 = AXIS2_PLACEMENT_3D('',#116480,#116481,#116482); +#116480 = CARTESIAN_POINT('',(3.375,6.575,-10.88127375692)); +#116481 = DIRECTION('',(-1.,0.,0.)); +#116482 = DIRECTION('',(0.,0.,1.)); +#116483 = ADVANCED_FACE('',(#116484),#116500,.F.); +#116484 = FACE_BOUND('',#116485,.T.); +#116485 = EDGE_LOOP('',(#116486,#116487,#116493,#116494)); +#116486 = ORIENTED_EDGE('',*,*,#115919,.T.); +#116487 = ORIENTED_EDGE('',*,*,#116488,.T.); +#116488 = EDGE_CURVE('',#115912,#116421,#116489,.T.); +#116489 = LINE('',#116490,#116491); +#116490 = CARTESIAN_POINT('',(-1.975,6.575,-11.2)); +#116491 = VECTOR('',#116492,1.); +#116492 = DIRECTION('',(0.,-1.,0.)); +#116493 = ORIENTED_EDGE('',*,*,#116420,.T.); +#116494 = ORIENTED_EDGE('',*,*,#116495,.T.); +#116495 = EDGE_CURVE('',#116413,#115920,#116496,.T.); +#116496 = LINE('',#116497,#116498); +#116497 = CARTESIAN_POINT('',(-3.375,6.075,-11.2)); +#116498 = VECTOR('',#116499,1.); +#116499 = DIRECTION('',(0.,1.,0.)); +#116500 = PLANE('',#116501); +#116501 = AXIS2_PLACEMENT_3D('',#116502,#116503,#116504); +#116502 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#116503 = DIRECTION('',(0.,0.,1.)); +#116504 = DIRECTION('',(1.,0.,-0.)); +#116505 = ADVANCED_FACE('',(#116506),#116512,.F.); +#116506 = FACE_BOUND('',#116507,.T.); +#116507 = EDGE_LOOP('',(#116508,#116509,#116510,#116511)); +#116508 = ORIENTED_EDGE('',*,*,#116155,.T.); +#116509 = ORIENTED_EDGE('',*,*,#116124,.T.); +#116510 = ORIENTED_EDGE('',*,*,#116472,.T.); +#116511 = ORIENTED_EDGE('',*,*,#116443,.T.); +#116512 = PLANE('',#116513); +#116513 = AXIS2_PLACEMENT_3D('',#116514,#116515,#116516); +#116514 = CARTESIAN_POINT('',(-6.575,-5.975,-11.2)); +#116515 = DIRECTION('',(0.,0.,1.)); +#116516 = DIRECTION('',(1.,0.,-0.)); +#116517 = ADVANCED_FACE('',(#116518),#116529,.F.); +#116518 = FACE_BOUND('',#116519,.T.); +#116519 = EDGE_LOOP('',(#116520,#116526,#116527,#116528)); +#116520 = ORIENTED_EDGE('',*,*,#116521,.F.); +#116521 = EDGE_CURVE('',#115928,#116405,#116522,.T.); +#116522 = LINE('',#116523,#116524); +#116523 = CARTESIAN_POINT('',(-3.375,6.575,-9.281273756922)); +#116524 = VECTOR('',#116525,1.); +#116525 = DIRECTION('',(0.,-1.,0.)); +#116526 = ORIENTED_EDGE('',*,*,#115927,.T.); +#116527 = ORIENTED_EDGE('',*,*,#116495,.F.); +#116528 = ORIENTED_EDGE('',*,*,#116412,.T.); +#116529 = PLANE('',#116530); +#116530 = AXIS2_PLACEMENT_3D('',#116531,#116532,#116533); +#116531 = CARTESIAN_POINT('',(-3.375,6.575,-9.281273756922)); +#116532 = DIRECTION('',(1.,0.,0.)); +#116533 = DIRECTION('',(-0.,1.,0.)); +#116534 = ADVANCED_FACE('',(#116535),#116546,.F.); +#116535 = FACE_BOUND('',#116536,.T.); +#116536 = EDGE_LOOP('',(#116537,#116538,#116539,#116545)); +#116537 = ORIENTED_EDGE('',*,*,#116521,.T.); +#116538 = ORIENTED_EDGE('',*,*,#116404,.F.); +#116539 = ORIENTED_EDGE('',*,*,#116540,.F.); +#116540 = EDGE_CURVE('',#115936,#116397,#116541,.T.); +#116541 = LINE('',#116542,#116543); +#116542 = CARTESIAN_POINT('',(-4.575,6.575,-9.281273756922)); +#116543 = VECTOR('',#116544,1.); +#116544 = DIRECTION('',(0.,-1.,0.)); +#116545 = ORIENTED_EDGE('',*,*,#115935,.T.); +#116546 = PLANE('',#116547); +#116547 = AXIS2_PLACEMENT_3D('',#116548,#116549,#116550); +#116548 = CARTESIAN_POINT('',(-4.575,6.575,-9.281273756922)); +#116549 = DIRECTION('',(0.,0.,1.)); +#116550 = DIRECTION('',(1.,0.,-0.)); +#116551 = ADVANCED_FACE('',(#116552),#116588,.T.); +#116552 = FACE_BOUND('',#116553,.T.); +#116553 = EDGE_LOOP('',(#116554,#116564,#116571,#116572,#116573,#116574, + #116582)); +#116554 = ORIENTED_EDGE('',*,*,#116555,.F.); +#116555 = EDGE_CURVE('',#116556,#116558,#116560,.T.); +#116556 = VERTEX_POINT('',#116557); +#116557 = CARTESIAN_POINT('',(-4.575,6.075,-11.2553)); +#116558 = VERTEX_POINT('',#116559); +#116559 = CARTESIAN_POINT('',(-4.575,5.275,-11.2553)); +#116560 = LINE('',#116561,#116562); +#116561 = CARTESIAN_POINT('',(-4.575,6.075,-11.2553)); +#116562 = VECTOR('',#116563,1.); +#116563 = DIRECTION('',(0.,-1.,0.)); +#116564 = ORIENTED_EDGE('',*,*,#116565,.T.); +#116565 = EDGE_CURVE('',#116556,#115944,#116566,.T.); +#116566 = CIRCLE('',#116567,0.5); +#116567 = AXIS2_PLACEMENT_3D('',#116568,#116569,#116570); +#116568 = CARTESIAN_POINT('',(-4.575,6.075,-10.7553)); +#116569 = DIRECTION('',(1.,0.,0.)); +#116570 = DIRECTION('',(0.,0.,-1.)); +#116571 = ORIENTED_EDGE('',*,*,#115943,.F.); +#116572 = ORIENTED_EDGE('',*,*,#116540,.T.); +#116573 = ORIENTED_EDGE('',*,*,#116396,.F.); +#116574 = ORIENTED_EDGE('',*,*,#116575,.T.); +#116575 = EDGE_CURVE('',#116389,#116576,#116578,.T.); +#116576 = VERTEX_POINT('',#116577); +#116577 = CARTESIAN_POINT('',(-4.575,5.275,-10.7553)); +#116578 = LINE('',#116579,#116580); +#116579 = CARTESIAN_POINT('',(-4.575,6.075,-10.7553)); +#116580 = VECTOR('',#116581,1.); +#116581 = DIRECTION('',(0.,-1.,0.)); +#116582 = ORIENTED_EDGE('',*,*,#116583,.F.); +#116583 = EDGE_CURVE('',#116558,#116576,#116584,.T.); +#116584 = LINE('',#116585,#116586); +#116585 = CARTESIAN_POINT('',(-4.575,5.275,-11.2553)); +#116586 = VECTOR('',#116587,1.); +#116587 = DIRECTION('',(0.,0.,1.)); +#116588 = PLANE('',#116589); +#116589 = AXIS2_PLACEMENT_3D('',#116590,#116591,#116592); +#116590 = CARTESIAN_POINT('',(-4.575,6.575,-10.7553)); +#116591 = DIRECTION('',(1.,0.,0.)); +#116592 = DIRECTION('',(-0.,1.,0.)); +#116593 = ADVANCED_FACE('',(#116594),#116621,.T.); +#116594 = FACE_BOUND('',#116595,.T.); +#116595 = EDGE_LOOP('',(#116596,#116606,#116613,#116614)); +#116596 = ORIENTED_EDGE('',*,*,#116597,.F.); +#116597 = EDGE_CURVE('',#116598,#116600,#116602,.T.); +#116598 = VERTEX_POINT('',#116599); +#116599 = CARTESIAN_POINT('',(-4.875,4.975,-11.2553)); +#116600 = VERTEX_POINT('',#116601); +#116601 = CARTESIAN_POINT('',(-4.875,4.975,-10.7553)); +#116602 = LINE('',#116603,#116604); +#116603 = CARTESIAN_POINT('',(-4.875,4.975,-11.2553)); +#116604 = VECTOR('',#116605,1.); +#116605 = DIRECTION('',(0.,0.,1.)); +#116606 = ORIENTED_EDGE('',*,*,#116607,.F.); +#116607 = EDGE_CURVE('',#116558,#116598,#116608,.T.); +#116608 = CIRCLE('',#116609,0.3); +#116609 = AXIS2_PLACEMENT_3D('',#116610,#116611,#116612); +#116610 = CARTESIAN_POINT('',(-4.875,5.275,-11.2553)); +#116611 = DIRECTION('',(0.,0.,-1.)); +#116612 = DIRECTION('',(1.,0.,0.)); +#116613 = ORIENTED_EDGE('',*,*,#116583,.T.); +#116614 = ORIENTED_EDGE('',*,*,#116615,.F.); +#116615 = EDGE_CURVE('',#116600,#116576,#116616,.T.); +#116616 = CIRCLE('',#116617,0.3); +#116617 = AXIS2_PLACEMENT_3D('',#116618,#116619,#116620); +#116618 = CARTESIAN_POINT('',(-4.875,5.275,-10.7553)); +#116619 = DIRECTION('',(0.,0.,1.)); +#116620 = DIRECTION('',(0.,-1.,0.)); +#116621 = CYLINDRICAL_SURFACE('',#116622,0.3); +#116622 = AXIS2_PLACEMENT_3D('',#116623,#116624,#116625); +#116623 = CARTESIAN_POINT('',(-4.875,5.275,-31.28968)); +#116624 = DIRECTION('',(0.,0.,1.)); +#116625 = DIRECTION('',(0.,-1.,0.)); +#116626 = ADVANCED_FACE('',(#116627),#116670,.F.); +#116627 = FACE_BOUND('',#116628,.T.); +#116628 = EDGE_LOOP('',(#116629,#116639,#116648,#116654,#116655,#116663) + ); +#116629 = ORIENTED_EDGE('',*,*,#116630,.F.); +#116630 = EDGE_CURVE('',#116631,#116633,#116635,.T.); +#116631 = VERTEX_POINT('',#116632); +#116632 = CARTESIAN_POINT('',(5.475,4.975,-10.7553)); +#116633 = VERTEX_POINT('',#116634); +#116634 = CARTESIAN_POINT('',(4.875,4.975,-10.7553)); +#116635 = LINE('',#116636,#116637); +#116636 = CARTESIAN_POINT('',(5.475,4.975,-10.7553)); +#116637 = VECTOR('',#116638,1.); +#116638 = DIRECTION('',(-1.,0.,0.)); +#116639 = ORIENTED_EDGE('',*,*,#116640,.T.); +#116640 = EDGE_CURVE('',#116631,#116641,#116643,.T.); +#116641 = VERTEX_POINT('',#116642); +#116642 = CARTESIAN_POINT('',(5.775,5.275,-10.7553)); +#116643 = CIRCLE('',#116644,0.3); +#116644 = AXIS2_PLACEMENT_3D('',#116645,#116646,#116647); +#116645 = CARTESIAN_POINT('',(5.475,5.275,-10.7553)); +#116646 = DIRECTION('',(0.,0.,1.)); +#116647 = DIRECTION('',(0.,-1.,0.)); +#116648 = ORIENTED_EDGE('',*,*,#116649,.F.); +#116649 = EDGE_CURVE('',#116196,#116641,#116650,.T.); +#116650 = LINE('',#116651,#116652); +#116651 = CARTESIAN_POINT('',(5.775,6.075,-10.7553)); +#116652 = VECTOR('',#116653,1.); +#116653 = DIRECTION('',(0.,-1.,0.)); +#116654 = ORIENTED_EDGE('',*,*,#116195,.T.); +#116655 = ORIENTED_EDGE('',*,*,#116656,.F.); +#116656 = EDGE_CURVE('',#116657,#116188,#116659,.T.); +#116657 = VERTEX_POINT('',#116658); +#116658 = CARTESIAN_POINT('',(4.575,5.275,-10.7553)); +#116659 = LINE('',#116660,#116661); +#116660 = CARTESIAN_POINT('',(4.575,5.275,-10.7553)); +#116661 = VECTOR('',#116662,1.); +#116662 = DIRECTION('',(0.,1.,0.)); +#116663 = ORIENTED_EDGE('',*,*,#116664,.T.); +#116664 = EDGE_CURVE('',#116657,#116633,#116665,.T.); +#116665 = CIRCLE('',#116666,0.3); +#116666 = AXIS2_PLACEMENT_3D('',#116667,#116668,#116669); +#116667 = CARTESIAN_POINT('',(4.875,5.275,-10.7553)); +#116668 = DIRECTION('',(0.,0.,1.)); +#116669 = DIRECTION('',(-1.,0.,0.)); +#116670 = PLANE('',#116671); +#116671 = AXIS2_PLACEMENT_3D('',#116672,#116673,#116674); +#116672 = CARTESIAN_POINT('',(0.,6.075,-10.7553)); +#116673 = DIRECTION('',(0.,0.,-1.)); +#116674 = DIRECTION('',(0.,-1.,0.)); +#116675 = ADVANCED_FACE('',(#116676),#116704,.F.); +#116676 = FACE_BOUND('',#116677,.T.); +#116677 = EDGE_LOOP('',(#116678,#116679,#116680,#116688,#116697,#116703) + ); +#116678 = ORIENTED_EDGE('',*,*,#116575,.F.); +#116679 = ORIENTED_EDGE('',*,*,#116388,.T.); +#116680 = ORIENTED_EDGE('',*,*,#116681,.F.); +#116681 = EDGE_CURVE('',#116682,#116381,#116684,.T.); +#116682 = VERTEX_POINT('',#116683); +#116683 = CARTESIAN_POINT('',(-5.775,5.275,-10.7553)); +#116684 = LINE('',#116685,#116686); +#116685 = CARTESIAN_POINT('',(-5.775,5.275,-10.7553)); +#116686 = VECTOR('',#116687,1.); +#116687 = DIRECTION('',(0.,1.,0.)); +#116688 = ORIENTED_EDGE('',*,*,#116689,.T.); +#116689 = EDGE_CURVE('',#116682,#116690,#116692,.T.); +#116690 = VERTEX_POINT('',#116691); +#116691 = CARTESIAN_POINT('',(-5.475,4.975,-10.7553)); +#116692 = CIRCLE('',#116693,0.3); +#116693 = AXIS2_PLACEMENT_3D('',#116694,#116695,#116696); +#116694 = CARTESIAN_POINT('',(-5.475,5.275,-10.7553)); +#116695 = DIRECTION('',(0.,0.,1.)); +#116696 = DIRECTION('',(-1.,0.,0.)); +#116697 = ORIENTED_EDGE('',*,*,#116698,.F.); +#116698 = EDGE_CURVE('',#116600,#116690,#116699,.T.); +#116699 = LINE('',#116700,#116701); +#116700 = CARTESIAN_POINT('',(-4.875,4.975,-10.7553)); +#116701 = VECTOR('',#116702,1.); +#116702 = DIRECTION('',(-1.,0.,0.)); +#116703 = ORIENTED_EDGE('',*,*,#116615,.T.); +#116704 = PLANE('',#116705); +#116705 = AXIS2_PLACEMENT_3D('',#116706,#116707,#116708); +#116706 = CARTESIAN_POINT('',(0.,6.075,-10.7553)); +#116707 = DIRECTION('',(0.,0.,-1.)); +#116708 = DIRECTION('',(0.,-1.,0.)); +#116709 = ADVANCED_FACE('',(#116710),#116736,.T.); +#116710 = FACE_BOUND('',#116711,.T.); +#116711 = EDGE_LOOP('',(#116712,#116720,#116729,#116735)); +#116712 = ORIENTED_EDGE('',*,*,#116713,.F.); +#116713 = EDGE_CURVE('',#116714,#116657,#116716,.T.); +#116714 = VERTEX_POINT('',#116715); +#116715 = CARTESIAN_POINT('',(4.575,5.275,-11.2553)); +#116716 = LINE('',#116717,#116718); +#116717 = CARTESIAN_POINT('',(4.575,5.275,-11.2553)); +#116718 = VECTOR('',#116719,1.); +#116719 = DIRECTION('',(0.,0.,1.)); +#116720 = ORIENTED_EDGE('',*,*,#116721,.F.); +#116721 = EDGE_CURVE('',#116722,#116714,#116724,.T.); +#116722 = VERTEX_POINT('',#116723); +#116723 = CARTESIAN_POINT('',(4.875,4.975,-11.2553)); +#116724 = CIRCLE('',#116725,0.3); +#116725 = AXIS2_PLACEMENT_3D('',#116726,#116727,#116728); +#116726 = CARTESIAN_POINT('',(4.875,5.275,-11.2553)); +#116727 = DIRECTION('',(0.,0.,-1.)); +#116728 = DIRECTION('',(0.,-1.,0.)); +#116729 = ORIENTED_EDGE('',*,*,#116730,.T.); +#116730 = EDGE_CURVE('',#116722,#116633,#116731,.T.); +#116731 = LINE('',#116732,#116733); +#116732 = CARTESIAN_POINT('',(4.875,4.975,-11.2553)); +#116733 = VECTOR('',#116734,1.); +#116734 = DIRECTION('',(0.,0.,1.)); +#116735 = ORIENTED_EDGE('',*,*,#116664,.F.); +#116736 = CYLINDRICAL_SURFACE('',#116737,0.3); +#116737 = AXIS2_PLACEMENT_3D('',#116738,#116739,#116740); +#116738 = CARTESIAN_POINT('',(4.875,5.275,-31.28968)); +#116739 = DIRECTION('',(0.,0.,1.)); +#116740 = DIRECTION('',(-1.,0.,0.)); +#116741 = ADVANCED_FACE('',(#116742),#116760,.T.); +#116742 = FACE_BOUND('',#116743,.T.); +#116743 = EDGE_LOOP('',(#116744,#116752,#116758,#116759)); +#116744 = ORIENTED_EDGE('',*,*,#116745,.F.); +#116745 = EDGE_CURVE('',#116746,#116722,#116748,.T.); +#116746 = VERTEX_POINT('',#116747); +#116747 = CARTESIAN_POINT('',(5.475,4.975,-11.2553)); +#116748 = LINE('',#116749,#116750); +#116749 = CARTESIAN_POINT('',(5.475,4.975,-11.2553)); +#116750 = VECTOR('',#116751,1.); +#116751 = DIRECTION('',(-1.,0.,0.)); +#116752 = ORIENTED_EDGE('',*,*,#116753,.T.); +#116753 = EDGE_CURVE('',#116746,#116631,#116754,.T.); +#116754 = LINE('',#116755,#116756); +#116755 = CARTESIAN_POINT('',(5.475,4.975,-11.2553)); +#116756 = VECTOR('',#116757,1.); +#116757 = DIRECTION('',(0.,0.,1.)); +#116758 = ORIENTED_EDGE('',*,*,#116630,.T.); +#116759 = ORIENTED_EDGE('',*,*,#116730,.F.); +#116760 = PLANE('',#116761); +#116761 = AXIS2_PLACEMENT_3D('',#116762,#116763,#116764); +#116762 = CARTESIAN_POINT('',(5.775,4.975,-10.7553)); +#116763 = DIRECTION('',(0.,-1.,0.)); +#116764 = DIRECTION('',(0.,0.,-1.)); +#116765 = ADVANCED_FACE('',(#116766),#116785,.T.); +#116766 = FACE_BOUND('',#116767,.T.); +#116767 = EDGE_LOOP('',(#116768,#116769,#116778,#116784)); +#116768 = ORIENTED_EDGE('',*,*,#116753,.F.); +#116769 = ORIENTED_EDGE('',*,*,#116770,.F.); +#116770 = EDGE_CURVE('',#116771,#116746,#116773,.T.); +#116771 = VERTEX_POINT('',#116772); +#116772 = CARTESIAN_POINT('',(5.775,5.275,-11.2553)); +#116773 = CIRCLE('',#116774,0.3); +#116774 = AXIS2_PLACEMENT_3D('',#116775,#116776,#116777); +#116775 = CARTESIAN_POINT('',(5.475,5.275,-11.2553)); +#116776 = DIRECTION('',(0.,0.,-1.)); +#116777 = DIRECTION('',(1.,0.,0.)); +#116778 = ORIENTED_EDGE('',*,*,#116779,.T.); +#116779 = EDGE_CURVE('',#116771,#116641,#116780,.T.); +#116780 = LINE('',#116781,#116782); +#116781 = CARTESIAN_POINT('',(5.775,5.275,-11.2553)); +#116782 = VECTOR('',#116783,1.); +#116783 = DIRECTION('',(0.,0.,1.)); +#116784 = ORIENTED_EDGE('',*,*,#116640,.F.); +#116785 = CYLINDRICAL_SURFACE('',#116786,0.3); +#116786 = AXIS2_PLACEMENT_3D('',#116787,#116788,#116789); +#116787 = CARTESIAN_POINT('',(5.475,5.275,-31.28968)); +#116788 = DIRECTION('',(0.,0.,1.)); +#116789 = DIRECTION('',(0.,-1.,0.)); +#116790 = ADVANCED_FACE('',(#116791),#116819,.T.); +#116791 = FACE_BOUND('',#116792,.T.); +#116792 = EDGE_LOOP('',(#116793,#116801,#116810,#116816,#116817,#116818) + ); +#116793 = ORIENTED_EDGE('',*,*,#116794,.F.); +#116794 = EDGE_CURVE('',#116795,#116771,#116797,.T.); +#116795 = VERTEX_POINT('',#116796); +#116796 = CARTESIAN_POINT('',(5.775,6.075,-11.2553)); +#116797 = LINE('',#116798,#116799); +#116798 = CARTESIAN_POINT('',(5.775,6.075,-11.2553)); +#116799 = VECTOR('',#116800,1.); +#116800 = DIRECTION('',(0.,-1.,0.)); +#116801 = ORIENTED_EDGE('',*,*,#116802,.T.); +#116802 = EDGE_CURVE('',#116795,#116803,#116805,.T.); +#116803 = VERTEX_POINT('',#116804); +#116804 = CARTESIAN_POINT('',(5.775,6.533257569496,-10.9553)); +#116805 = CIRCLE('',#116806,0.5); +#116806 = AXIS2_PLACEMENT_3D('',#116807,#116808,#116809); +#116807 = CARTESIAN_POINT('',(5.775,6.075,-10.7553)); +#116808 = DIRECTION('',(1.,0.,0.)); +#116809 = DIRECTION('',(0.,0.,-1.)); +#116810 = ORIENTED_EDGE('',*,*,#116811,.T.); +#116811 = EDGE_CURVE('',#116803,#116204,#116812,.T.); +#116812 = LINE('',#116813,#116814); +#116813 = CARTESIAN_POINT('',(5.775,6.533257569496,-10.9553)); +#116814 = VECTOR('',#116815,1.); +#116815 = DIRECTION('',(0.,-1.,0.)); +#116816 = ORIENTED_EDGE('',*,*,#116203,.T.); +#116817 = ORIENTED_EDGE('',*,*,#116649,.T.); +#116818 = ORIENTED_EDGE('',*,*,#116779,.F.); +#116819 = PLANE('',#116820); +#116820 = AXIS2_PLACEMENT_3D('',#116821,#116822,#116823); +#116821 = CARTESIAN_POINT('',(5.775,6.575,-10.7553)); +#116822 = DIRECTION('',(1.,0.,0.)); +#116823 = DIRECTION('',(-0.,1.,0.)); +#116824 = ADVANCED_FACE('',(#116825),#116844,.F.); +#116825 = FACE_BOUND('',#116826,.F.); +#116826 = EDGE_LOOP('',(#116827,#116833,#116842,#116843)); +#116827 = ORIENTED_EDGE('',*,*,#116828,.F.); +#116828 = EDGE_CURVE('',#116085,#116212,#116829,.T.); +#116829 = LINE('',#116830,#116831); +#116830 = CARTESIAN_POINT('',(5.975,6.575,-10.7553)); +#116831 = VECTOR('',#116832,1.); +#116832 = DIRECTION('',(0.,-1.,0.)); +#116833 = ORIENTED_EDGE('',*,*,#116834,.T.); +#116834 = EDGE_CURVE('',#116085,#116803,#116835,.T.); +#116835 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#116836,#116837,#116838, + #116839,#116840,#116841),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#116836 = CARTESIAN_POINT('',(5.975,6.575,-10.7553)); +#116837 = CARTESIAN_POINT('',(5.9210099078,6.575,-10.75554324093)); +#116838 = CARTESIAN_POINT('',(5.870773852541,6.575963388075, + -10.77658327835)); +#116839 = CARTESIAN_POINT('',(5.79609972279,6.567128372071, + -10.85135706393)); +#116840 = CARTESIAN_POINT('',(5.775,6.556256070022,-10.90260381523)); +#116841 = CARTESIAN_POINT('',(5.775,6.533257569496,-10.9553)); +#116842 = ORIENTED_EDGE('',*,*,#116811,.T.); +#116843 = ORIENTED_EDGE('',*,*,#116211,.T.); +#116844 = CYLINDRICAL_SURFACE('',#116845,0.2); +#116845 = AXIS2_PLACEMENT_3D('',#116846,#116847,#116848); +#116846 = CARTESIAN_POINT('',(5.975,23.71734,-10.9553)); +#116847 = DIRECTION('',(0.,-1.,0.)); +#116848 = DIRECTION('',(0.,0.,1.)); +#116849 = ADVANCED_FACE('',(#116850),#116861,.T.); +#116850 = FACE_BOUND('',#116851,.T.); +#116851 = EDGE_LOOP('',(#116852,#116853,#116859,#116860)); +#116852 = ORIENTED_EDGE('',*,*,#116084,.F.); +#116853 = ORIENTED_EDGE('',*,*,#116854,.T.); +#116854 = EDGE_CURVE('',#116077,#116221,#116855,.T.); +#116855 = LINE('',#116856,#116857); +#116856 = CARTESIAN_POINT('',(6.575,6.575,-10.7553)); +#116857 = VECTOR('',#116858,1.); +#116858 = DIRECTION('',(0.,-1.,0.)); +#116859 = ORIENTED_EDGE('',*,*,#116220,.T.); +#116860 = ORIENTED_EDGE('',*,*,#116828,.F.); +#116861 = PLANE('',#116862); +#116862 = AXIS2_PLACEMENT_3D('',#116863,#116864,#116865); +#116863 = CARTESIAN_POINT('',(6.575,6.575,-10.7553)); +#116864 = DIRECTION('',(0.,0.,-1.)); +#116865 = DIRECTION('',(0.,-1.,0.)); +#116866 = ADVANCED_FACE('',(#116867),#116883,.T.); +#116867 = FACE_BOUND('',#116868,.T.); +#116868 = EDGE_LOOP('',(#116869,#116870,#116876,#116877)); +#116869 = ORIENTED_EDGE('',*,*,#116363,.T.); +#116870 = ORIENTED_EDGE('',*,*,#116871,.F.); +#116871 = EDGE_CURVE('',#115960,#116356,#116872,.T.); +#116872 = LINE('',#116873,#116874); +#116873 = CARTESIAN_POINT('',(-6.575,6.575,-10.7553)); +#116874 = VECTOR('',#116875,1.); +#116875 = DIRECTION('',(0.,-1.,0.)); +#116876 = ORIENTED_EDGE('',*,*,#115959,.F.); +#116877 = ORIENTED_EDGE('',*,*,#116878,.F.); +#116878 = EDGE_CURVE('',#116364,#115952,#116879,.T.); +#116879 = LINE('',#116880,#116881); +#116880 = CARTESIAN_POINT('',(-5.975,6.075,-10.7553)); +#116881 = VECTOR('',#116882,1.); +#116882 = DIRECTION('',(0.,1.,0.)); +#116883 = PLANE('',#116884); +#116884 = AXIS2_PLACEMENT_3D('',#116885,#116886,#116887); +#116885 = CARTESIAN_POINT('',(6.575,6.575,-10.7553)); +#116886 = DIRECTION('',(0.,0.,-1.)); +#116887 = DIRECTION('',(0.,-1.,0.)); +#116888 = ADVANCED_FACE('',(#116889),#116900,.T.); +#116889 = FACE_BOUND('',#116890,.T.); +#116890 = EDGE_LOOP('',(#116891,#116897,#116898,#116899)); +#116891 = ORIENTED_EDGE('',*,*,#116892,.T.); +#116892 = EDGE_CURVE('',#116069,#116229,#116893,.T.); +#116893 = LINE('',#116894,#116895); +#116894 = CARTESIAN_POINT('',(6.575,6.575,-5.8208)); +#116895 = VECTOR('',#116896,1.); +#116896 = DIRECTION('',(0.,-1.,0.)); +#116897 = ORIENTED_EDGE('',*,*,#116228,.T.); +#116898 = ORIENTED_EDGE('',*,*,#116854,.F.); +#116899 = ORIENTED_EDGE('',*,*,#116076,.F.); +#116900 = PLANE('',#116901); +#116901 = AXIS2_PLACEMENT_3D('',#116902,#116903,#116904); +#116902 = CARTESIAN_POINT('',(6.575,6.575,-5.8208)); +#116903 = DIRECTION('',(1.,0.,0.)); +#116904 = DIRECTION('',(-0.,1.,0.)); +#116905 = ADVANCED_FACE('',(#116906),#116917,.T.); +#116906 = FACE_BOUND('',#116907,.T.); +#116907 = EDGE_LOOP('',(#116908,#116914,#116915,#116916)); +#116908 = ORIENTED_EDGE('',*,*,#116909,.T.); +#116909 = EDGE_CURVE('',#116061,#116237,#116910,.T.); +#116910 = LINE('',#116911,#116912); +#116911 = CARTESIAN_POINT('',(5.975,6.575,-5.8208)); +#116912 = VECTOR('',#116913,1.); +#116913 = DIRECTION('',(0.,-1.,0.)); +#116914 = ORIENTED_EDGE('',*,*,#116236,.T.); +#116915 = ORIENTED_EDGE('',*,*,#116892,.F.); +#116916 = ORIENTED_EDGE('',*,*,#116068,.F.); +#116917 = PLANE('',#116918); +#116918 = AXIS2_PLACEMENT_3D('',#116919,#116920,#116921); +#116919 = CARTESIAN_POINT('',(5.975,6.575,-5.8208)); +#116920 = DIRECTION('',(0.,0.,1.)); +#116921 = DIRECTION('',(1.,0.,-0.)); +#116922 = ADVANCED_FACE('',(#116923),#116934,.T.); +#116923 = FACE_BOUND('',#116924,.T.); +#116924 = EDGE_LOOP('',(#116925,#116931,#116932,#116933)); +#116925 = ORIENTED_EDGE('',*,*,#116926,.T.); +#116926 = EDGE_CURVE('',#116053,#116245,#116927,.T.); +#116927 = LINE('',#116928,#116929); +#116928 = CARTESIAN_POINT('',(5.975,6.575,-1.2)); +#116929 = VECTOR('',#116930,1.); +#116930 = DIRECTION('',(0.,-1.,0.)); +#116931 = ORIENTED_EDGE('',*,*,#116244,.T.); +#116932 = ORIENTED_EDGE('',*,*,#116909,.F.); +#116933 = ORIENTED_EDGE('',*,*,#116060,.F.); +#116934 = PLANE('',#116935); +#116935 = AXIS2_PLACEMENT_3D('',#116936,#116937,#116938); +#116936 = CARTESIAN_POINT('',(5.975,6.575,-1.2)); +#116937 = DIRECTION('',(1.,0.,0.)); +#116938 = DIRECTION('',(-0.,1.,0.)); +#116939 = ADVANCED_FACE('',(#116940),#116951,.T.); +#116940 = FACE_BOUND('',#116941,.T.); +#116941 = EDGE_LOOP('',(#116942,#116943,#116944,#116945)); +#116942 = ORIENTED_EDGE('',*,*,#116252,.T.); +#116943 = ORIENTED_EDGE('',*,*,#116926,.F.); +#116944 = ORIENTED_EDGE('',*,*,#116052,.F.); +#116945 = ORIENTED_EDGE('',*,*,#116946,.F.); +#116946 = EDGE_CURVE('',#116253,#116044,#116947,.T.); +#116947 = LINE('',#116948,#116949); +#116948 = CARTESIAN_POINT('',(5.609475380552,6.075,-0.377569606242)); +#116949 = VECTOR('',#116950,1.); +#116950 = DIRECTION('',(0.,1.,0.)); +#116951 = PLANE('',#116952); +#116952 = AXIS2_PLACEMENT_3D('',#116953,#116954,#116955); +#116953 = CARTESIAN_POINT('',(5.575,6.575,-0.3)); +#116954 = DIRECTION('',(0.91381154862,0.,0.406138466053)); +#116955 = DIRECTION('',(0.,-1.,0.)); +#116956 = ADVANCED_FACE('',(#116957),#116968,.F.); +#116957 = FACE_BOUND('',#116958,.F.); +#116958 = EDGE_LOOP('',(#116959,#116960,#116961,#116967)); +#116959 = ORIENTED_EDGE('',*,*,#116946,.F.); +#116960 = ORIENTED_EDGE('',*,*,#116260,.T.); +#116961 = ORIENTED_EDGE('',*,*,#116962,.T.); +#116962 = EDGE_CURVE('',#116261,#116036,#116963,.T.); +#116963 = LINE('',#116964,#116965); +#116964 = CARTESIAN_POINT('',(5.575,6.075,-0.21511421982)); +#116965 = VECTOR('',#116966,1.); +#116966 = DIRECTION('',(0.,1.,0.)); +#116967 = ORIENTED_EDGE('',*,*,#116043,.T.); +#116968 = CYLINDRICAL_SURFACE('',#116969,0.4); +#116969 = AXIS2_PLACEMENT_3D('',#116970,#116971,#116972); +#116970 = CARTESIAN_POINT('',(5.975,-23.71788209056,-0.21511421982)); +#116971 = DIRECTION('',(0.,1.,0.)); +#116972 = DIRECTION('',(-0.91381154862,0.,-0.406138466053)); +#116973 = ADVANCED_FACE('',(#116974),#116980,.T.); +#116974 = FACE_BOUND('',#116975,.T.); +#116975 = EDGE_LOOP('',(#116976,#116977,#116978,#116979)); +#116976 = ORIENTED_EDGE('',*,*,#116035,.F.); +#116977 = ORIENTED_EDGE('',*,*,#104954,.T.); +#116978 = ORIENTED_EDGE('',*,*,#116269,.T.); +#116979 = ORIENTED_EDGE('',*,*,#116962,.T.); +#116980 = PLANE('',#116981); +#116981 = AXIS2_PLACEMENT_3D('',#116982,#116983,#116984); +#116982 = CARTESIAN_POINT('',(5.575,6.575,0.5)); +#116983 = DIRECTION('',(1.,0.,0.)); +#116984 = DIRECTION('',(-0.,1.,0.)); +#116985 = ADVANCED_FACE('',(#116986),#117007,.F.); +#116986 = FACE_BOUND('',#116987,.F.); +#116987 = EDGE_LOOP('',(#116988,#116989,#116990,#116998)); +#116988 = ORIENTED_EDGE('',*,*,#116878,.F.); +#116989 = ORIENTED_EDGE('',*,*,#116371,.T.); +#116990 = ORIENTED_EDGE('',*,*,#116991,.T.); +#116991 = EDGE_CURVE('',#116372,#116992,#116994,.T.); +#116992 = VERTEX_POINT('',#116993); +#116993 = CARTESIAN_POINT('',(-5.775,6.533257569496,-10.9553)); +#116994 = LINE('',#116995,#116996); +#116995 = CARTESIAN_POINT('',(-5.775,6.075,-10.9553)); +#116996 = VECTOR('',#116997,1.); +#116997 = DIRECTION('',(0.,1.,0.)); +#116998 = ORIENTED_EDGE('',*,*,#116999,.T.); +#116999 = EDGE_CURVE('',#116992,#115952,#117000,.T.); +#117000 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117001,#117002,#117003, + #117004,#117005,#117006),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#117001 = CARTESIAN_POINT('',(-5.775,6.533257569496,-10.9553)); +#117002 = CARTESIAN_POINT('',(-5.775,6.556246855712,-10.90262492787)); +#117003 = CARTESIAN_POINT('',(-5.796470602391,6.567170846258, + -10.85099759025)); +#117004 = CARTESIAN_POINT('',(-5.870402972939,6.575920913889, + -10.77694275203)); +#117005 = CARTESIAN_POINT('',(-5.920988249899,6.575,-10.75554333851)); +#117006 = CARTESIAN_POINT('',(-5.975,6.575,-10.7553)); +#117007 = CYLINDRICAL_SURFACE('',#117008,0.2); +#117008 = AXIS2_PLACEMENT_3D('',#117009,#117010,#117011); +#117009 = CARTESIAN_POINT('',(-5.975,-23.71734,-10.9553)); +#117010 = DIRECTION('',(0.,1.,0.)); +#117011 = DIRECTION('',(0.,-0.,1.)); +#117012 = ADVANCED_FACE('',(#117013),#117041,.T.); +#117013 = FACE_BOUND('',#117014,.T.); +#117014 = EDGE_LOOP('',(#117015,#117016,#117017,#117018,#117027,#117035) + ); +#117015 = ORIENTED_EDGE('',*,*,#116681,.T.); +#117016 = ORIENTED_EDGE('',*,*,#116380,.F.); +#117017 = ORIENTED_EDGE('',*,*,#116991,.T.); +#117018 = ORIENTED_EDGE('',*,*,#117019,.T.); +#117019 = EDGE_CURVE('',#116992,#117020,#117022,.T.); +#117020 = VERTEX_POINT('',#117021); +#117021 = CARTESIAN_POINT('',(-5.775,6.075,-11.2553)); +#117022 = CIRCLE('',#117023,0.5); +#117023 = AXIS2_PLACEMENT_3D('',#117024,#117025,#117026); +#117024 = CARTESIAN_POINT('',(-5.775,6.075,-10.7553)); +#117025 = DIRECTION('',(-1.,0.,0.)); +#117026 = DIRECTION('',(0.,0.916515138991,-0.4)); +#117027 = ORIENTED_EDGE('',*,*,#117028,.F.); +#117028 = EDGE_CURVE('',#117029,#117020,#117031,.T.); +#117029 = VERTEX_POINT('',#117030); +#117030 = CARTESIAN_POINT('',(-5.775,5.275,-11.2553)); +#117031 = LINE('',#117032,#117033); +#117032 = CARTESIAN_POINT('',(-5.775,5.275,-11.2553)); +#117033 = VECTOR('',#117034,1.); +#117034 = DIRECTION('',(0.,1.,0.)); +#117035 = ORIENTED_EDGE('',*,*,#117036,.T.); +#117036 = EDGE_CURVE('',#117029,#116682,#117037,.T.); +#117037 = LINE('',#117038,#117039); +#117038 = CARTESIAN_POINT('',(-5.775,5.275,-11.2553)); +#117039 = VECTOR('',#117040,1.); +#117040 = DIRECTION('',(0.,0.,1.)); +#117041 = PLANE('',#117042); +#117042 = AXIS2_PLACEMENT_3D('',#117043,#117044,#117045); +#117043 = CARTESIAN_POINT('',(-5.775,4.975,-10.7553)); +#117044 = DIRECTION('',(-1.,0.,0.)); +#117045 = DIRECTION('',(0.,0.,1.)); +#117046 = ADVANCED_FACE('',(#117047),#117066,.T.); +#117047 = FACE_BOUND('',#117048,.T.); +#117048 = EDGE_LOOP('',(#117049,#117050,#117059,#117065)); +#117049 = ORIENTED_EDGE('',*,*,#117036,.F.); +#117050 = ORIENTED_EDGE('',*,*,#117051,.F.); +#117051 = EDGE_CURVE('',#117052,#117029,#117054,.T.); +#117052 = VERTEX_POINT('',#117053); +#117053 = CARTESIAN_POINT('',(-5.475,4.975,-11.2553)); +#117054 = CIRCLE('',#117055,0.3); +#117055 = AXIS2_PLACEMENT_3D('',#117056,#117057,#117058); +#117056 = CARTESIAN_POINT('',(-5.475,5.275,-11.2553)); +#117057 = DIRECTION('',(0.,0.,-1.)); +#117058 = DIRECTION('',(0.,-1.,0.)); +#117059 = ORIENTED_EDGE('',*,*,#117060,.T.); +#117060 = EDGE_CURVE('',#117052,#116690,#117061,.T.); +#117061 = LINE('',#117062,#117063); +#117062 = CARTESIAN_POINT('',(-5.475,4.975,-11.2553)); +#117063 = VECTOR('',#117064,1.); +#117064 = DIRECTION('',(0.,0.,1.)); +#117065 = ORIENTED_EDGE('',*,*,#116689,.F.); +#117066 = CYLINDRICAL_SURFACE('',#117067,0.3); +#117067 = AXIS2_PLACEMENT_3D('',#117068,#117069,#117070); +#117068 = CARTESIAN_POINT('',(-5.475,5.275,-31.28968)); +#117069 = DIRECTION('',(0.,0.,1.)); +#117070 = DIRECTION('',(-1.,0.,0.)); +#117071 = ADVANCED_FACE('',(#117072),#117083,.T.); +#117072 = FACE_BOUND('',#117073,.T.); +#117073 = EDGE_LOOP('',(#117074,#117075,#117076,#117082)); +#117074 = ORIENTED_EDGE('',*,*,#116698,.T.); +#117075 = ORIENTED_EDGE('',*,*,#117060,.F.); +#117076 = ORIENTED_EDGE('',*,*,#117077,.F.); +#117077 = EDGE_CURVE('',#116598,#117052,#117078,.T.); +#117078 = LINE('',#117079,#117080); +#117079 = CARTESIAN_POINT('',(-4.875,4.975,-11.2553)); +#117080 = VECTOR('',#117081,1.); +#117081 = DIRECTION('',(-1.,0.,0.)); +#117082 = ORIENTED_EDGE('',*,*,#116597,.T.); +#117083 = PLANE('',#117084); +#117084 = AXIS2_PLACEMENT_3D('',#117085,#117086,#117087); +#117085 = CARTESIAN_POINT('',(-4.575,4.975,-10.7553)); +#117086 = DIRECTION('',(0.,-1.,0.)); +#117087 = DIRECTION('',(0.,0.,-1.)); +#117088 = ADVANCED_FACE('',(#117089),#117109,.T.); +#117089 = FACE_BOUND('',#117090,.T.); +#117090 = EDGE_LOOP('',(#117091,#117099,#117105,#117106,#117107,#117108) + ); +#117091 = ORIENTED_EDGE('',*,*,#117092,.T.); +#117092 = EDGE_CURVE('',#116714,#117093,#117095,.T.); +#117093 = VERTEX_POINT('',#117094); +#117094 = CARTESIAN_POINT('',(4.575,6.075,-11.2553)); +#117095 = LINE('',#117096,#117097); +#117096 = CARTESIAN_POINT('',(4.575,5.275,-11.2553)); +#117097 = VECTOR('',#117098,1.); +#117098 = DIRECTION('',(0.,1.,0.)); +#117099 = ORIENTED_EDGE('',*,*,#117100,.T.); +#117100 = EDGE_CURVE('',#117093,#116795,#117101,.T.); +#117101 = LINE('',#117102,#117103); +#117102 = CARTESIAN_POINT('',(4.575,6.075,-11.2553)); +#117103 = VECTOR('',#117104,1.); +#117104 = DIRECTION('',(1.,0.,0.)); +#117105 = ORIENTED_EDGE('',*,*,#116794,.T.); +#117106 = ORIENTED_EDGE('',*,*,#116770,.T.); +#117107 = ORIENTED_EDGE('',*,*,#116745,.T.); +#117108 = ORIENTED_EDGE('',*,*,#116721,.T.); +#117109 = PLANE('',#117110); +#117110 = AXIS2_PLACEMENT_3D('',#117111,#117112,#117113); +#117111 = CARTESIAN_POINT('',(0.,6.075,-11.2553)); +#117112 = DIRECTION('',(0.,0.,-1.)); +#117113 = DIRECTION('',(0.,-1.,0.)); +#117114 = ADVANCED_FACE('',(#117115),#117128,.T.); +#117115 = FACE_BOUND('',#117116,.T.); +#117116 = EDGE_LOOP('',(#117117,#117118,#117119,#117120,#117126,#117127) + ); +#117117 = ORIENTED_EDGE('',*,*,#117077,.T.); +#117118 = ORIENTED_EDGE('',*,*,#117051,.T.); +#117119 = ORIENTED_EDGE('',*,*,#117028,.T.); +#117120 = ORIENTED_EDGE('',*,*,#117121,.T.); +#117121 = EDGE_CURVE('',#117020,#116556,#117122,.T.); +#117122 = LINE('',#117123,#117124); +#117123 = CARTESIAN_POINT('',(-5.775,6.075,-11.2553)); +#117124 = VECTOR('',#117125,1.); +#117125 = DIRECTION('',(1.,0.,0.)); +#117126 = ORIENTED_EDGE('',*,*,#116555,.T.); +#117127 = ORIENTED_EDGE('',*,*,#116607,.T.); +#117128 = PLANE('',#117129); +#117129 = AXIS2_PLACEMENT_3D('',#117130,#117131,#117132); +#117130 = CARTESIAN_POINT('',(0.,6.075,-11.2553)); +#117131 = DIRECTION('',(0.,0.,-1.)); +#117132 = DIRECTION('',(0.,-1.,0.)); +#117133 = ADVANCED_FACE('',(#117134),#117147,.T.); +#117134 = FACE_BOUND('',#117135,.T.); +#117135 = EDGE_LOOP('',(#117136,#117137,#117144,#117145,#117146)); +#117136 = ORIENTED_EDGE('',*,*,#117100,.F.); +#117137 = ORIENTED_EDGE('',*,*,#117138,.F.); +#117138 = EDGE_CURVE('',#116093,#117093,#117139,.T.); +#117139 = CIRCLE('',#117140,0.5); +#117140 = AXIS2_PLACEMENT_3D('',#117141,#117142,#117143); +#117141 = CARTESIAN_POINT('',(4.575,6.075,-10.7553)); +#117142 = DIRECTION('',(-1.,0.,0.)); +#117143 = DIRECTION('',(0.,1.,0.)); +#117144 = ORIENTED_EDGE('',*,*,#116092,.F.); +#117145 = ORIENTED_EDGE('',*,*,#116834,.T.); +#117146 = ORIENTED_EDGE('',*,*,#116802,.F.); +#117147 = CYLINDRICAL_SURFACE('',#117148,0.5); +#117148 = AXIS2_PLACEMENT_3D('',#117149,#117150,#117151); +#117149 = CARTESIAN_POINT('',(-23.71734,6.075,-10.7553)); +#117150 = DIRECTION('',(1.,0.,0.)); +#117151 = DIRECTION('',(0.,0.,-1.)); +#117152 = ADVANCED_FACE('',(#117153),#117167,.T.); +#117153 = FACE_BOUND('',#117154,.T.); +#117154 = EDGE_LOOP('',(#117155,#117156,#117157,#117163,#117164,#117165, + #117166)); +#117155 = ORIENTED_EDGE('',*,*,#116656,.T.); +#117156 = ORIENTED_EDGE('',*,*,#116187,.F.); +#117157 = ORIENTED_EDGE('',*,*,#117158,.F.); +#117158 = EDGE_CURVE('',#116101,#116180,#117159,.T.); +#117159 = LINE('',#117160,#117161); +#117160 = CARTESIAN_POINT('',(4.575,6.575,-9.281273756922)); +#117161 = VECTOR('',#117162,1.); +#117162 = DIRECTION('',(0.,-1.,0.)); +#117163 = ORIENTED_EDGE('',*,*,#116100,.F.); +#117164 = ORIENTED_EDGE('',*,*,#117138,.T.); +#117165 = ORIENTED_EDGE('',*,*,#117092,.F.); +#117166 = ORIENTED_EDGE('',*,*,#116713,.T.); +#117167 = PLANE('',#117168); +#117168 = AXIS2_PLACEMENT_3D('',#117169,#117170,#117171); +#117169 = CARTESIAN_POINT('',(4.575,4.975,-10.7553)); +#117170 = DIRECTION('',(-1.,0.,0.)); +#117171 = DIRECTION('',(0.,0.,1.)); +#117172 = ADVANCED_FACE('',(#117173),#117179,.F.); +#117173 = FACE_BOUND('',#117174,.T.); +#117174 = EDGE_LOOP('',(#117175,#117176,#117177,#117178)); +#117175 = ORIENTED_EDGE('',*,*,#117158,.T.); +#117176 = ORIENTED_EDGE('',*,*,#116177,.F.); +#117177 = ORIENTED_EDGE('',*,*,#116465,.F.); +#117178 = ORIENTED_EDGE('',*,*,#116108,.T.); +#117179 = PLANE('',#117180); +#117180 = AXIS2_PLACEMENT_3D('',#117181,#117182,#117183); +#117181 = CARTESIAN_POINT('',(3.375,6.575,-9.281273756922)); +#117182 = DIRECTION('',(0.,0.,1.)); +#117183 = DIRECTION('',(1.,0.,-0.)); +#117184 = ADVANCED_FACE('',(#117185),#117192,.T.); +#117185 = FACE_BOUND('',#117186,.T.); +#117186 = EDGE_LOOP('',(#117187,#117188,#117189,#117190,#117191)); +#117187 = ORIENTED_EDGE('',*,*,#116565,.F.); +#117188 = ORIENTED_EDGE('',*,*,#117121,.F.); +#117189 = ORIENTED_EDGE('',*,*,#117019,.F.); +#117190 = ORIENTED_EDGE('',*,*,#116999,.T.); +#117191 = ORIENTED_EDGE('',*,*,#115951,.F.); +#117192 = CYLINDRICAL_SURFACE('',#117193,0.5); +#117193 = AXIS2_PLACEMENT_3D('',#117194,#117195,#117196); +#117194 = CARTESIAN_POINT('',(-23.71734,6.075,-10.7553)); +#117195 = DIRECTION('',(1.,0.,0.)); +#117196 = DIRECTION('',(0.,0.,-1.)); +#117197 = ADVANCED_FACE('',(#117198),#117209,.T.); +#117198 = FACE_BOUND('',#117199,.T.); +#117199 = EDGE_LOOP('',(#117200,#117201,#117202,#117208)); +#117200 = ORIENTED_EDGE('',*,*,#116871,.T.); +#117201 = ORIENTED_EDGE('',*,*,#116355,.T.); +#117202 = ORIENTED_EDGE('',*,*,#117203,.F.); +#117203 = EDGE_CURVE('',#115968,#116348,#117204,.T.); +#117204 = LINE('',#117205,#117206); +#117205 = CARTESIAN_POINT('',(-6.575,6.575,-5.8208)); +#117206 = VECTOR('',#117207,1.); +#117207 = DIRECTION('',(0.,-1.,0.)); +#117208 = ORIENTED_EDGE('',*,*,#115967,.F.); +#117209 = PLANE('',#117210); +#117210 = AXIS2_PLACEMENT_3D('',#117211,#117212,#117213); +#117211 = CARTESIAN_POINT('',(-6.575,6.575,-10.7553)); +#117212 = DIRECTION('',(-1.,0.,0.)); +#117213 = DIRECTION('',(0.,0.,1.)); +#117214 = ADVANCED_FACE('',(#117215),#117226,.T.); +#117215 = FACE_BOUND('',#117216,.T.); +#117216 = EDGE_LOOP('',(#117217,#117218,#117219,#117225)); +#117217 = ORIENTED_EDGE('',*,*,#117203,.T.); +#117218 = ORIENTED_EDGE('',*,*,#116347,.T.); +#117219 = ORIENTED_EDGE('',*,*,#117220,.F.); +#117220 = EDGE_CURVE('',#115976,#116340,#117221,.T.); +#117221 = LINE('',#117222,#117223); +#117222 = CARTESIAN_POINT('',(-5.975,6.575,-5.8208)); +#117223 = VECTOR('',#117224,1.); +#117224 = DIRECTION('',(0.,-1.,0.)); +#117225 = ORIENTED_EDGE('',*,*,#115975,.F.); +#117226 = PLANE('',#117227); +#117227 = AXIS2_PLACEMENT_3D('',#117228,#117229,#117230); +#117228 = CARTESIAN_POINT('',(-6.575,6.575,-5.8208)); +#117229 = DIRECTION('',(0.,0.,1.)); +#117230 = DIRECTION('',(1.,0.,-0.)); +#117231 = ADVANCED_FACE('',(#117232),#117243,.T.); +#117232 = FACE_BOUND('',#117233,.T.); +#117233 = EDGE_LOOP('',(#117234,#117235,#117236,#117242)); +#117234 = ORIENTED_EDGE('',*,*,#117220,.T.); +#117235 = ORIENTED_EDGE('',*,*,#116339,.T.); +#117236 = ORIENTED_EDGE('',*,*,#117237,.F.); +#117237 = EDGE_CURVE('',#115984,#116332,#117238,.T.); +#117238 = LINE('',#117239,#117240); +#117239 = CARTESIAN_POINT('',(-5.975,6.575,-1.2)); +#117240 = VECTOR('',#117241,1.); +#117241 = DIRECTION('',(0.,-1.,0.)); +#117242 = ORIENTED_EDGE('',*,*,#115983,.F.); +#117243 = PLANE('',#117244); +#117244 = AXIS2_PLACEMENT_3D('',#117245,#117246,#117247); +#117245 = CARTESIAN_POINT('',(-5.975,6.575,-5.8208)); +#117246 = DIRECTION('',(-1.,0.,0.)); +#117247 = DIRECTION('',(0.,0.,1.)); +#117248 = ADVANCED_FACE('',(#117249),#117260,.T.); +#117249 = FACE_BOUND('',#117250,.T.); +#117250 = EDGE_LOOP('',(#117251,#117252,#117253,#117254)); +#117251 = ORIENTED_EDGE('',*,*,#115991,.F.); +#117252 = ORIENTED_EDGE('',*,*,#117237,.T.); +#117253 = ORIENTED_EDGE('',*,*,#116331,.T.); +#117254 = ORIENTED_EDGE('',*,*,#117255,.T.); +#117255 = EDGE_CURVE('',#116323,#115992,#117256,.T.); +#117256 = LINE('',#117257,#117258); +#117257 = CARTESIAN_POINT('',(-5.609475380552,6.075,-0.377569606242)); +#117258 = VECTOR('',#117259,1.); +#117259 = DIRECTION('',(0.,1.,0.)); +#117260 = PLANE('',#117261); +#117261 = AXIS2_PLACEMENT_3D('',#117262,#117263,#117264); +#117262 = CARTESIAN_POINT('',(-5.975,6.575,-1.2)); +#117263 = DIRECTION('',(-0.91381154862,0.,0.406138466053)); +#117264 = DIRECTION('',(0.,1.,0.)); +#117265 = ADVANCED_FACE('',(#117266),#117277,.F.); +#117266 = FACE_BOUND('',#117267,.F.); +#117267 = EDGE_LOOP('',(#117268,#117274,#117275,#117276)); +#117268 = ORIENTED_EDGE('',*,*,#117269,.F.); +#117269 = EDGE_CURVE('',#116315,#116000,#117270,.T.); +#117270 = LINE('',#117271,#117272); +#117271 = CARTESIAN_POINT('',(-5.575,6.075,-0.21511421982)); +#117272 = VECTOR('',#117273,1.); +#117273 = DIRECTION('',(0.,1.,0.)); +#117274 = ORIENTED_EDGE('',*,*,#116322,.T.); +#117275 = ORIENTED_EDGE('',*,*,#117255,.T.); +#117276 = ORIENTED_EDGE('',*,*,#115999,.T.); +#117277 = CYLINDRICAL_SURFACE('',#117278,0.4); +#117278 = AXIS2_PLACEMENT_3D('',#117279,#117280,#117281); +#117279 = CARTESIAN_POINT('',(-5.975,-23.71788209056,-0.21511421982)); +#117280 = DIRECTION('',(0.,1.,0.)); +#117281 = DIRECTION('',(1.,0.,0.)); +#117282 = ADVANCED_FACE('',(#117283),#117289,.T.); +#117283 = FACE_BOUND('',#117284,.T.); +#117284 = EDGE_LOOP('',(#117285,#117286,#117287,#117288)); +#117285 = ORIENTED_EDGE('',*,*,#116314,.T.); +#117286 = ORIENTED_EDGE('',*,*,#104838,.F.); +#117287 = ORIENTED_EDGE('',*,*,#116008,.F.); +#117288 = ORIENTED_EDGE('',*,*,#117269,.F.); +#117289 = PLANE('',#117290); +#117290 = AXIS2_PLACEMENT_3D('',#117291,#117292,#117293); +#117291 = CARTESIAN_POINT('',(-5.575,6.575,-0.3)); +#117292 = DIRECTION('',(-1.,0.,0.)); +#117293 = DIRECTION('',(0.,0.,1.)); +#117294 = ADVANCED_FACE('',(#117295),#117306,.F.); +#117295 = FACE_BOUND('',#117296,.T.); +#117296 = EDGE_LOOP('',(#117297,#117303,#117304,#117305)); +#117297 = ORIENTED_EDGE('',*,*,#117298,.T.); +#117298 = EDGE_CURVE('',#115902,#116429,#117299,.T.); +#117299 = LINE('',#117300,#117301); +#117300 = CARTESIAN_POINT('',(-1.975,6.575,-7.881448674684)); +#117301 = VECTOR('',#117302,1.); +#117302 = DIRECTION('',(0.,-1.,0.)); +#117303 = ORIENTED_EDGE('',*,*,#116428,.T.); +#117304 = ORIENTED_EDGE('',*,*,#116488,.F.); +#117305 = ORIENTED_EDGE('',*,*,#115911,.F.); +#117306 = PLANE('',#117307); +#117307 = AXIS2_PLACEMENT_3D('',#117308,#117309,#117310); +#117308 = CARTESIAN_POINT('',(-1.975,6.575,-13.88144867468)); +#117309 = DIRECTION('',(-1.,0.,0.)); +#117310 = DIRECTION('',(0.,0.,1.)); +#117311 = ADVANCED_FACE('',(#117312),#117318,.F.); +#117312 = FACE_BOUND('',#117313,.T.); +#117313 = EDGE_LOOP('',(#117314,#117315,#117316,#117317)); +#117314 = ORIENTED_EDGE('',*,*,#116146,.T.); +#117315 = ORIENTED_EDGE('',*,*,#116436,.F.); +#117316 = ORIENTED_EDGE('',*,*,#117298,.F.); +#117317 = ORIENTED_EDGE('',*,*,#115901,.T.); +#117318 = PLANE('',#117319); +#117319 = AXIS2_PLACEMENT_3D('',#117320,#117321,#117322); +#117320 = CARTESIAN_POINT('',(-1.975,6.575,-7.881448674684)); +#117321 = DIRECTION('',(0.,0.,1.)); +#117322 = DIRECTION('',(1.,0.,-0.)); +#117323 = ADVANCED_FACE('',(#117324),#117342,.F.); +#117324 = FACE_BOUND('',#117325,.T.); +#117325 = EDGE_LOOP('',(#117326,#117327,#117328,#117334,#117335,#117336) + ); +#117326 = ORIENTED_EDGE('',*,*,#104854,.F.); +#117327 = ORIENTED_EDGE('',*,*,#116307,.F.); +#117328 = ORIENTED_EDGE('',*,*,#117329,.T.); +#117329 = EDGE_CURVE('',#116299,#115631,#117330,.T.); +#117330 = LINE('',#117331,#117332); +#117331 = CARTESIAN_POINT('',(-4.3,6.075,5.E-02)); +#117332 = VECTOR('',#117333,1.); +#117333 = DIRECTION('',(0.,1.,0.)); +#117334 = ORIENTED_EDGE('',*,*,#115630,.F.); +#117335 = ORIENTED_EDGE('',*,*,#105879,.T.); +#117336 = ORIENTED_EDGE('',*,*,#117337,.T.); +#117337 = EDGE_CURVE('',#105871,#104855,#117338,.T.); +#117338 = LINE('',#117339,#117340); +#117339 = CARTESIAN_POINT('',(-4.3,5.925,0.5)); +#117340 = VECTOR('',#117341,1.); +#117341 = DIRECTION('',(0.,0.,-1.)); +#117342 = PLANE('',#117343); +#117343 = AXIS2_PLACEMENT_3D('',#117344,#117345,#117346); +#117344 = CARTESIAN_POINT('',(-4.3,6.575,0.5)); +#117345 = DIRECTION('',(-1.,0.,0.)); +#117346 = DIRECTION('',(0.,0.,1.)); +#117347 = ADVANCED_FACE('',(#117348),#117359,.F.); +#117348 = FACE_BOUND('',#117349,.F.); +#117349 = EDGE_LOOP('',(#117350,#117356,#117357,#117358)); +#117350 = ORIENTED_EDGE('',*,*,#117351,.F.); +#117351 = EDGE_CURVE('',#105863,#104863,#117352,.T.); +#117352 = LINE('',#117353,#117354); +#117353 = CARTESIAN_POINT('',(-4.15,5.775,0.5)); +#117354 = VECTOR('',#117355,1.); +#117355 = DIRECTION('',(0.,0.,-1.)); +#117356 = ORIENTED_EDGE('',*,*,#105870,.T.); +#117357 = ORIENTED_EDGE('',*,*,#117337,.T.); +#117358 = ORIENTED_EDGE('',*,*,#104862,.T.); +#117359 = CYLINDRICAL_SURFACE('',#117360,0.15); +#117360 = AXIS2_PLACEMENT_3D('',#117361,#117362,#117363); +#117361 = CARTESIAN_POINT('',(-4.15,5.925,18.48968)); +#117362 = DIRECTION('',(0.,0.,-1.)); +#117363 = DIRECTION('',(0.,-1.,0.)); +#117364 = ADVANCED_FACE('',(#117365),#117376,.F.); +#117365 = FACE_BOUND('',#117366,.T.); +#117366 = EDGE_LOOP('',(#117367,#117368,#117369,#117370)); +#117367 = ORIENTED_EDGE('',*,*,#104871,.F.); +#117368 = ORIENTED_EDGE('',*,*,#117351,.F.); +#117369 = ORIENTED_EDGE('',*,*,#105862,.T.); +#117370 = ORIENTED_EDGE('',*,*,#117371,.T.); +#117371 = EDGE_CURVE('',#105854,#104872,#117372,.T.); +#117372 = LINE('',#117373,#117374); +#117373 = CARTESIAN_POINT('',(-2.95,5.775,0.5)); +#117374 = VECTOR('',#117375,1.); +#117375 = DIRECTION('',(0.,0.,-1.)); +#117376 = PLANE('',#117377); +#117377 = AXIS2_PLACEMENT_3D('',#117378,#117379,#117380); +#117378 = CARTESIAN_POINT('',(-4.3,5.775,0.5)); +#117379 = DIRECTION('',(0.,-1.,0.)); +#117380 = DIRECTION('',(0.,0.,-1.)); +#117381 = ADVANCED_FACE('',(#117382),#117393,.F.); +#117382 = FACE_BOUND('',#117383,.F.); +#117383 = EDGE_LOOP('',(#117384,#117390,#117391,#117392)); +#117384 = ORIENTED_EDGE('',*,*,#117385,.F.); +#117385 = EDGE_CURVE('',#105846,#104880,#117386,.T.); +#117386 = LINE('',#117387,#117388); +#117387 = CARTESIAN_POINT('',(-2.8,5.925,0.5)); +#117388 = VECTOR('',#117389,1.); +#117389 = DIRECTION('',(0.,0.,-1.)); +#117390 = ORIENTED_EDGE('',*,*,#105853,.T.); +#117391 = ORIENTED_EDGE('',*,*,#117371,.T.); +#117392 = ORIENTED_EDGE('',*,*,#104879,.T.); +#117393 = CYLINDRICAL_SURFACE('',#117394,0.15); +#117394 = AXIS2_PLACEMENT_3D('',#117395,#117396,#117397); +#117395 = CARTESIAN_POINT('',(-2.95,5.925,18.48968)); +#117396 = DIRECTION('',(0.,0.,-1.)); +#117397 = DIRECTION('',(1.,0.,0.)); +#117398 = ADVANCED_FACE('',(#117399),#117412,.F.); +#117399 = FACE_BOUND('',#117400,.T.); +#117400 = EDGE_LOOP('',(#117401,#117402,#117403,#117409,#117410,#117411) + ); +#117401 = ORIENTED_EDGE('',*,*,#105845,.F.); +#117402 = ORIENTED_EDGE('',*,*,#115587,.T.); +#117403 = ORIENTED_EDGE('',*,*,#117404,.T.); +#117404 = EDGE_CURVE('',#115578,#116283,#117405,.T.); +#117405 = LINE('',#117406,#117407); +#117406 = CARTESIAN_POINT('',(-2.8,6.572493718553,5.E-02)); +#117407 = VECTOR('',#117408,1.); +#117408 = DIRECTION('',(0.,-1.,0.)); +#117409 = ORIENTED_EDGE('',*,*,#116282,.T.); +#117410 = ORIENTED_EDGE('',*,*,#104888,.T.); +#117411 = ORIENTED_EDGE('',*,*,#117385,.F.); +#117412 = PLANE('',#117413); +#117413 = AXIS2_PLACEMENT_3D('',#117414,#117415,#117416); +#117414 = CARTESIAN_POINT('',(-2.8,5.775,0.5)); +#117415 = DIRECTION('',(1.,0.,0.)); +#117416 = DIRECTION('',(-0.,1.,0.)); +#117417 = ADVANCED_FACE('',(#117418),#117425,.F.); +#117418 = FACE_BOUND('',#117419,.F.); +#117419 = EDGE_LOOP('',(#117420,#117421,#117422,#117423,#117424)); +#117420 = ORIENTED_EDGE('',*,*,#115862,.F.); +#117421 = ORIENTED_EDGE('',*,*,#116023,.T.); +#117422 = ORIENTED_EDGE('',*,*,#115575,.T.); +#117423 = ORIENTED_EDGE('',*,*,#117404,.T.); +#117424 = ORIENTED_EDGE('',*,*,#116290,.T.); +#117425 = CYLINDRICAL_SURFACE('',#117426,0.15); +#117426 = AXIS2_PLACEMENT_3D('',#117427,#117428,#117429); +#117427 = CARTESIAN_POINT('',(-2.95,23.71788209057,5.E-02)); +#117428 = DIRECTION('',(0.,-1.,0.)); +#117429 = DIRECTION('',(0.,0.,-1.)); +#117430 = ADVANCED_FACE('',(#117431),#117438,.F.); +#117431 = FACE_BOUND('',#117432,.F.); +#117432 = EDGE_LOOP('',(#117433,#117434,#117435,#117436,#117437)); +#117433 = ORIENTED_EDGE('',*,*,#115846,.F.); +#117434 = ORIENTED_EDGE('',*,*,#116298,.T.); +#117435 = ORIENTED_EDGE('',*,*,#117329,.T.); +#117436 = ORIENTED_EDGE('',*,*,#115639,.T.); +#117437 = ORIENTED_EDGE('',*,*,#116015,.T.); +#117438 = CYLINDRICAL_SURFACE('',#117439,0.15); +#117439 = AXIS2_PLACEMENT_3D('',#117440,#117441,#117442); +#117440 = CARTESIAN_POINT('',(-4.15,-23.71788209056,5.E-02)); +#117441 = DIRECTION('',(0.,1.,0.)); +#117442 = DIRECTION('',(0.,0.,-1.)); +#117443 = ADVANCED_FACE('',(#117444),#117462,.F.); +#117444 = FACE_BOUND('',#117445,.F.); +#117445 = EDGE_LOOP('',(#117446,#117447,#117448,#117461)); +#117446 = ORIENTED_EDGE('',*,*,#115523,.F.); +#117447 = ORIENTED_EDGE('',*,*,#104962,.F.); +#117448 = ORIENTED_EDGE('',*,*,#117449,.F.); +#117449 = EDGE_CURVE('',#105771,#104963,#117450,.T.); +#117450 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117451,#117452,#117453, + #117454,#117455,#117456,#117457,#117458,#117459,#117460), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),(0.,0.25,0.375,0.5,1.), + .UNSPECIFIED.); +#117451 = CARTESIAN_POINT('',(6.075,5.708974596216,0.5)); +#117452 = CARTESIAN_POINT('',(6.137774941753,5.672731466696,0.5)); +#117453 = CARTESIAN_POINT('',(6.199393107836,5.646115616586, + 0.488538490781)); +#117454 = CARTESIAN_POINT('',(6.28833504924,5.616459500176, + 0.453336124865)); +#117455 = CARTESIAN_POINT('',(6.316684499863,5.608546459896, + 0.438945938596)); +#117456 = CARTESIAN_POINT('',(6.370299613731,5.595787513023, + 0.404853437463)); +#117457 = CARTESIAN_POINT('',(6.394695065365,5.591078082894, + 0.385978008695)); +#117458 = CARTESIAN_POINT('',(6.516897314181,5.571795428367, + 0.270051682421)); +#117459 = CARTESIAN_POINT('',(6.574366195014,5.575,0.139800722151)); +#117460 = CARTESIAN_POINT('',(6.575,5.575,0.)); +#117461 = ORIENTED_EDGE('',*,*,#105778,.T.); +#117462 = CYLINDRICAL_SURFACE('',#117463,1.); +#117463 = AXIS2_PLACEMENT_3D('',#117464,#117465,#117466); +#117464 = CARTESIAN_POINT('',(6.575,6.575,0.)); +#117465 = DIRECTION('',(0.,0.,1.)); +#117466 = DIRECTION('',(1.,0.,-0.)); +#117467 = ADVANCED_FACE('',(#117468),#117509,.T.); +#117468 = FACE_BOUND('',#117469,.T.); +#117469 = EDGE_LOOP('',(#117470,#117471,#117484,#117492,#117502)); +#117470 = ORIENTED_EDGE('',*,*,#105670,.F.); +#117471 = ORIENTED_EDGE('',*,*,#117472,.F.); +#117472 = EDGE_CURVE('',#105088,#105662,#117473,.T.); +#117473 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117474,#117475,#117476, + #117477,#117478,#117479,#117480,#117481,#117482,#117483), + .UNSPECIFIED.,.F.,.F.,(4,2,2,2,4),(0.,0.25,0.375,0.5,1.), + .UNSPECIFIED.); +#117474 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#117475 = CARTESIAN_POINT('',(6.57468324068,-5.575,6.986966881598E-02)); +#117476 = CARTESIAN_POINT('',(6.560505702973,-5.574737979875, + 0.137080548376)); +#117477 = CARTESIAN_POINT('',(6.519896821348,-5.576427424726, + 0.230730905988)); +#117478 = CARTESIAN_POINT('',(6.503568037963,-5.577370653623, + 0.259945451166)); +#117479 = CARTESIAN_POINT('',(6.465419222204,-5.580837593202, + 0.314370060135)); +#117480 = CARTESIAN_POINT('',(6.442689170632,-5.583505086738, + 0.340441198891)); +#117481 = CARTESIAN_POINT('',(6.324948672812,-5.602083029629, + 0.452174939554)); +#117482 = CARTESIAN_POINT('',(6.200594627992,-5.636462503935,0.5)); +#117483 = CARTESIAN_POINT('',(6.075,-5.708974596216,0.5)); +#117484 = ORIENTED_EDGE('',*,*,#117485,.T.); +#117485 = EDGE_CURVE('',#105088,#117486,#117488,.T.); +#117486 = VERTEX_POINT('',#117487); +#117487 = CARTESIAN_POINT('',(6.575,-4.291421356237,0.)); +#117488 = LINE('',#117489,#117490); +#117489 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#117490 = VECTOR('',#117491,1.); +#117491 = DIRECTION('',(0.,1.,0.)); +#117492 = ORIENTED_EDGE('',*,*,#117493,.T.); +#117493 = EDGE_CURVE('',#117486,#117494,#117496,.T.); +#117494 = VERTEX_POINT('',#117495); +#117495 = CARTESIAN_POINT('',(6.572493718553,-4.3,5.E-02)); +#117496 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117497,#117498,#117499, + #117500,#117501),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#117497 = CARTESIAN_POINT('',(6.575,-4.291421356237,0.)); +#117498 = CARTESIAN_POINT('',(6.575,-4.294254978462,8.014693962439E-03) + ); +#117499 = CARTESIAN_POINT('',(6.574611284412,-4.29855458162, + 2.452188107117E-02)); +#117500 = CARTESIAN_POINT('',(6.573347042135,-4.3,4.150953756753E-02)); +#117501 = CARTESIAN_POINT('',(6.572493718553,-4.3,5.E-02)); +#117502 = ORIENTED_EDGE('',*,*,#117503,.F.); +#117503 = EDGE_CURVE('',#105671,#117494,#117504,.T.); +#117504 = CIRCLE('',#117505,0.5); +#117505 = AXIS2_PLACEMENT_3D('',#117506,#117507,#117508); +#117506 = CARTESIAN_POINT('',(6.075,-4.3,0.)); +#117507 = DIRECTION('',(0.,1.,0.)); +#117508 = DIRECTION('',(0.,-0.,1.)); +#117509 = CYLINDRICAL_SURFACE('',#117510,0.5); +#117510 = AXIS2_PLACEMENT_3D('',#117511,#117512,#117513); +#117511 = CARTESIAN_POINT('',(6.075,-23.71734,0.)); +#117512 = DIRECTION('',(0.,1.,0.)); +#117513 = DIRECTION('',(0.,-0.,1.)); +#117514 = ADVANCED_FACE('',(#117515),#117562,.T.); +#117515 = FACE_BOUND('',#117516,.T.); +#117516 = EDGE_LOOP('',(#117517,#117529,#117536,#117537,#117546,#117556) + ); +#117517 = ORIENTED_EDGE('',*,*,#117518,.T.); +#117518 = EDGE_CURVE('',#117519,#117521,#117523,.T.); +#117519 = VERTEX_POINT('',#117520); +#117520 = CARTESIAN_POINT('',(6.575,2.808578643763,0.)); +#117521 = VERTEX_POINT('',#117522); +#117522 = CARTESIAN_POINT('',(6.572493718553,2.8,5.E-02)); +#117523 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117524,#117525,#117526, + #117527,#117528),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#117524 = CARTESIAN_POINT('',(6.575,2.808578643763,0.)); +#117525 = CARTESIAN_POINT('',(6.575,2.805745021538,8.014693962438E-03)); +#117526 = CARTESIAN_POINT('',(6.574611284412,2.80144541838, + 2.452188107117E-02)); +#117527 = CARTESIAN_POINT('',(6.573347042135,2.8,4.150953756753E-02)); +#117528 = CARTESIAN_POINT('',(6.572493718553,2.8,5.E-02)); +#117529 = ORIENTED_EDGE('',*,*,#117530,.F.); +#117530 = EDGE_CURVE('',#105721,#117521,#117531,.T.); +#117531 = CIRCLE('',#117532,0.5); +#117532 = AXIS2_PLACEMENT_3D('',#117533,#117534,#117535); +#117533 = CARTESIAN_POINT('',(6.075,2.8,0.)); +#117534 = DIRECTION('',(0.,1.,0.)); +#117535 = DIRECTION('',(0.,-0.,1.)); +#117536 = ORIENTED_EDGE('',*,*,#105720,.F.); +#117537 = ORIENTED_EDGE('',*,*,#117538,.T.); +#117538 = EDGE_CURVE('',#105713,#117539,#117541,.T.); +#117539 = VERTEX_POINT('',#117540); +#117540 = CARTESIAN_POINT('',(6.572493718553,-2.8,5.E-02)); +#117541 = CIRCLE('',#117542,0.5); +#117542 = AXIS2_PLACEMENT_3D('',#117543,#117544,#117545); +#117543 = CARTESIAN_POINT('',(6.075,-2.8,0.)); +#117544 = DIRECTION('',(0.,1.,0.)); +#117545 = DIRECTION('',(0.,-0.,1.)); +#117546 = ORIENTED_EDGE('',*,*,#117547,.T.); +#117547 = EDGE_CURVE('',#117539,#117548,#117550,.T.); +#117548 = VERTEX_POINT('',#117549); +#117549 = CARTESIAN_POINT('',(6.575,-2.808578643763,0.)); +#117550 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117551,#117552,#117553, + #117554,#117555),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#117551 = CARTESIAN_POINT('',(6.572493718553,-2.8,5.E-02)); +#117552 = CARTESIAN_POINT('',(6.573347042135,-2.8,4.150953756753E-02)); +#117553 = CARTESIAN_POINT('',(6.574611284412,-2.80144541838, + 2.452188107117E-02)); +#117554 = CARTESIAN_POINT('',(6.575,-2.805745021538,8.014693962439E-03) + ); +#117555 = CARTESIAN_POINT('',(6.575,-2.808578643763,0.)); +#117556 = ORIENTED_EDGE('',*,*,#117557,.T.); +#117557 = EDGE_CURVE('',#117548,#117519,#117558,.T.); +#117558 = LINE('',#117559,#117560); +#117559 = CARTESIAN_POINT('',(6.575,-2.808578643763,0.)); +#117560 = VECTOR('',#117561,1.); +#117561 = DIRECTION('',(0.,1.,0.)); +#117562 = CYLINDRICAL_SURFACE('',#117563,0.5); +#117563 = AXIS2_PLACEMENT_3D('',#117564,#117565,#117566); +#117564 = CARTESIAN_POINT('',(6.075,-23.71734,0.)); +#117565 = DIRECTION('',(0.,1.,0.)); +#117566 = DIRECTION('',(0.,-0.,1.)); +#117567 = ADVANCED_FACE('',(#117568),#117597,.T.); +#117568 = FACE_BOUND('',#117569,.T.); +#117569 = EDGE_LOOP('',(#117570,#117571,#117572,#117581,#117591)); +#117570 = ORIENTED_EDGE('',*,*,#117449,.F.); +#117571 = ORIENTED_EDGE('',*,*,#105770,.F.); +#117572 = ORIENTED_EDGE('',*,*,#117573,.T.); +#117573 = EDGE_CURVE('',#105763,#117574,#117576,.T.); +#117574 = VERTEX_POINT('',#117575); +#117575 = CARTESIAN_POINT('',(6.572493718553,4.3,5.E-02)); +#117576 = CIRCLE('',#117577,0.5); +#117577 = AXIS2_PLACEMENT_3D('',#117578,#117579,#117580); +#117578 = CARTESIAN_POINT('',(6.075,4.3,0.)); +#117579 = DIRECTION('',(0.,1.,0.)); +#117580 = DIRECTION('',(0.,-0.,1.)); +#117581 = ORIENTED_EDGE('',*,*,#117582,.T.); +#117582 = EDGE_CURVE('',#117574,#117583,#117585,.T.); +#117583 = VERTEX_POINT('',#117584); +#117584 = CARTESIAN_POINT('',(6.575,4.291421356237,0.)); +#117585 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#117586,#117587,#117588, + #117589,#117590),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#117586 = CARTESIAN_POINT('',(6.572493718553,4.3,5.E-02)); +#117587 = CARTESIAN_POINT('',(6.573347042135,4.3,4.150953756753E-02)); +#117588 = CARTESIAN_POINT('',(6.574611284412,4.29855458162, + 2.452188107117E-02)); +#117589 = CARTESIAN_POINT('',(6.575,4.294254978462,8.014693962439E-03)); +#117590 = CARTESIAN_POINT('',(6.575,4.291421356237,0.)); +#117591 = ORIENTED_EDGE('',*,*,#117592,.T.); +#117592 = EDGE_CURVE('',#117583,#104963,#117593,.T.); +#117593 = LINE('',#117594,#117595); +#117594 = CARTESIAN_POINT('',(6.575,4.291421356237,0.)); +#117595 = VECTOR('',#117596,1.); +#117596 = DIRECTION('',(0.,1.,0.)); +#117597 = CYLINDRICAL_SURFACE('',#117598,0.5); +#117598 = AXIS2_PLACEMENT_3D('',#117599,#117600,#117601); +#117599 = CARTESIAN_POINT('',(6.075,-23.71734,0.)); +#117600 = DIRECTION('',(0.,1.,0.)); +#117601 = DIRECTION('',(0.,-0.,1.)); +#117602 = ADVANCED_FACE('',(#117603),#117628,.F.); +#117603 = FACE_BOUND('',#117604,.T.); +#117604 = EDGE_LOOP('',(#117605,#117606,#117607,#117615,#117621,#117622) + ); +#117605 = ORIENTED_EDGE('',*,*,#105678,.F.); +#117606 = ORIENTED_EDGE('',*,*,#117503,.T.); +#117607 = ORIENTED_EDGE('',*,*,#117608,.T.); +#117608 = EDGE_CURVE('',#117494,#117609,#117611,.T.); +#117609 = VERTEX_POINT('',#117610); +#117610 = CARTESIAN_POINT('',(6.075,-4.3,5.E-02)); +#117611 = LINE('',#117612,#117613); +#117612 = CARTESIAN_POINT('',(6.572493718553,-4.3,5.E-02)); +#117613 = VECTOR('',#117614,1.); +#117614 = DIRECTION('',(-1.,0.,0.)); +#117615 = ORIENTED_EDGE('',*,*,#117616,.T.); +#117616 = EDGE_CURVE('',#117609,#105072,#117617,.T.); +#117617 = LINE('',#117618,#117619); +#117618 = CARTESIAN_POINT('',(6.075,-4.3,5.E-02)); +#117619 = VECTOR('',#117620,1.); +#117620 = DIRECTION('',(0.,-1.7763568394E-14,-1.)); +#117621 = ORIENTED_EDGE('',*,*,#105071,.T.); +#117622 = ORIENTED_EDGE('',*,*,#117623,.F.); +#117623 = EDGE_CURVE('',#105679,#105063,#117624,.T.); +#117624 = LINE('',#117625,#117626); +#117625 = CARTESIAN_POINT('',(5.925,-4.3,0.5)); +#117626 = VECTOR('',#117627,1.); +#117627 = DIRECTION('',(0.,0.,-1.)); +#117628 = PLANE('',#117629); +#117629 = AXIS2_PLACEMENT_3D('',#117630,#117631,#117632); +#117630 = CARTESIAN_POINT('',(5.775,-4.3,0.5)); +#117631 = DIRECTION('',(0.,-1.,0.)); +#117632 = DIRECTION('',(0.,0.,-1.)); +#117633 = ADVANCED_FACE('',(#117634),#117645,.F.); +#117634 = FACE_BOUND('',#117635,.F.); +#117635 = EDGE_LOOP('',(#117636,#117637,#117638,#117644)); +#117636 = ORIENTED_EDGE('',*,*,#117623,.F.); +#117637 = ORIENTED_EDGE('',*,*,#105686,.T.); +#117638 = ORIENTED_EDGE('',*,*,#117639,.T.); +#117639 = EDGE_CURVE('',#105687,#105055,#117640,.T.); +#117640 = LINE('',#117641,#117642); +#117641 = CARTESIAN_POINT('',(5.775,-4.15,0.5)); +#117642 = VECTOR('',#117643,1.); +#117643 = DIRECTION('',(0.,0.,-1.)); +#117644 = ORIENTED_EDGE('',*,*,#105062,.T.); +#117645 = CYLINDRICAL_SURFACE('',#117646,0.15); +#117646 = AXIS2_PLACEMENT_3D('',#117647,#117648,#117649); +#117647 = CARTESIAN_POINT('',(5.925,-4.15,18.48968)); +#117648 = DIRECTION('',(0.,0.,-1.)); +#117649 = DIRECTION('',(0.,-1.,0.)); +#117650 = ADVANCED_FACE('',(#117651),#117662,.F.); +#117651 = FACE_BOUND('',#117652,.T.); +#117652 = EDGE_LOOP('',(#117653,#117654,#117660,#117661)); +#117653 = ORIENTED_EDGE('',*,*,#105054,.F.); +#117654 = ORIENTED_EDGE('',*,*,#117655,.F.); +#117655 = EDGE_CURVE('',#105696,#105046,#117656,.T.); +#117656 = LINE('',#117657,#117658); +#117657 = CARTESIAN_POINT('',(5.775,-2.95,0.5)); +#117658 = VECTOR('',#117659,1.); +#117659 = DIRECTION('',(0.,0.,-1.)); +#117660 = ORIENTED_EDGE('',*,*,#105695,.T.); +#117661 = ORIENTED_EDGE('',*,*,#117639,.T.); +#117662 = PLANE('',#117663); +#117663 = AXIS2_PLACEMENT_3D('',#117664,#117665,#117666); +#117664 = CARTESIAN_POINT('',(5.775,-2.8,0.5)); +#117665 = DIRECTION('',(-1.,0.,0.)); +#117666 = DIRECTION('',(0.,0.,1.)); +#117667 = ADVANCED_FACE('',(#117668),#117679,.F.); +#117668 = FACE_BOUND('',#117669,.F.); +#117669 = EDGE_LOOP('',(#117670,#117671,#117672,#117678)); +#117670 = ORIENTED_EDGE('',*,*,#117655,.F.); +#117671 = ORIENTED_EDGE('',*,*,#105703,.T.); +#117672 = ORIENTED_EDGE('',*,*,#117673,.T.); +#117673 = EDGE_CURVE('',#105704,#105038,#117674,.T.); +#117674 = LINE('',#117675,#117676); +#117675 = CARTESIAN_POINT('',(5.925,-2.8,0.5)); +#117676 = VECTOR('',#117677,1.); +#117677 = DIRECTION('',(0.,0.,-1.)); +#117678 = ORIENTED_EDGE('',*,*,#105045,.T.); +#117679 = CYLINDRICAL_SURFACE('',#117680,0.15); +#117680 = AXIS2_PLACEMENT_3D('',#117681,#117682,#117683); +#117681 = CARTESIAN_POINT('',(5.925,-2.95,18.48968)); +#117682 = DIRECTION('',(0.,0.,-1.)); +#117683 = DIRECTION('',(-1.,0.,0.)); +#117684 = ADVANCED_FACE('',(#117685),#117705,.F.); +#117685 = FACE_BOUND('',#117686,.T.); +#117686 = EDGE_LOOP('',(#117687,#117688,#117696,#117702,#117703,#117704) + ); +#117687 = ORIENTED_EDGE('',*,*,#105037,.F.); +#117688 = ORIENTED_EDGE('',*,*,#117689,.F.); +#117689 = EDGE_CURVE('',#117690,#105030,#117692,.T.); +#117690 = VERTEX_POINT('',#117691); +#117691 = CARTESIAN_POINT('',(6.075,-2.8,5.E-02)); +#117692 = LINE('',#117693,#117694); +#117693 = CARTESIAN_POINT('',(6.075,-2.8,5.E-02)); +#117694 = VECTOR('',#117695,1.); +#117695 = DIRECTION('',(-3.5527136788E-14,1.7763568394E-14,-1.)); +#117696 = ORIENTED_EDGE('',*,*,#117697,.T.); +#117697 = EDGE_CURVE('',#117690,#117539,#117698,.T.); +#117698 = LINE('',#117699,#117700); +#117699 = CARTESIAN_POINT('',(6.075,-2.8,5.E-02)); +#117700 = VECTOR('',#117701,1.); +#117701 = DIRECTION('',(1.,0.,0.)); +#117702 = ORIENTED_EDGE('',*,*,#117538,.F.); +#117703 = ORIENTED_EDGE('',*,*,#105712,.T.); +#117704 = ORIENTED_EDGE('',*,*,#117673,.T.); +#117705 = PLANE('',#117706); +#117706 = AXIS2_PLACEMENT_3D('',#117707,#117708,#117709); +#117707 = CARTESIAN_POINT('',(6.575,-2.8,0.5)); +#117708 = DIRECTION('',(-0.,1.,0.)); +#117709 = DIRECTION('',(1.,0.,0.)); +#117710 = ADVANCED_FACE('',(#117711),#117739,.F.); +#117711 = FACE_BOUND('',#117712,.F.); +#117712 = EDGE_LOOP('',(#117713,#117723,#117730,#117731,#117732)); +#117713 = ORIENTED_EDGE('',*,*,#117714,.F.); +#117714 = EDGE_CURVE('',#117715,#117717,#117719,.T.); +#117715 = VERTEX_POINT('',#117716); +#117716 = CARTESIAN_POINT('',(6.075,-2.95,-0.1)); +#117717 = VERTEX_POINT('',#117718); +#117718 = CARTESIAN_POINT('',(6.575,-2.95,-0.1)); +#117719 = LINE('',#117720,#117721); +#117720 = CARTESIAN_POINT('',(6.075,-2.95,-0.1)); +#117721 = VECTOR('',#117722,1.); +#117722 = DIRECTION('',(1.,0.,0.)); +#117723 = ORIENTED_EDGE('',*,*,#117724,.T.); +#117724 = EDGE_CURVE('',#117715,#117690,#117725,.T.); +#117725 = CIRCLE('',#117726,0.15); +#117726 = AXIS2_PLACEMENT_3D('',#117727,#117728,#117729); +#117727 = CARTESIAN_POINT('',(6.075,-2.95,5.E-02)); +#117728 = DIRECTION('',(1.,0.,0.)); +#117729 = DIRECTION('',(0.,1.156482317318E-14,-1.)); +#117730 = ORIENTED_EDGE('',*,*,#117697,.T.); +#117731 = ORIENTED_EDGE('',*,*,#117547,.T.); +#117732 = ORIENTED_EDGE('',*,*,#117733,.T.); +#117733 = EDGE_CURVE('',#117548,#117717,#117734,.T.); +#117734 = CIRCLE('',#117735,0.15); +#117735 = AXIS2_PLACEMENT_3D('',#117736,#117737,#117738); +#117736 = CARTESIAN_POINT('',(6.575,-2.95,5.E-02)); +#117737 = DIRECTION('',(-1.,0.,0.)); +#117738 = DIRECTION('',(0.,0.942809041582,-0.333333333333)); +#117739 = CYLINDRICAL_SURFACE('',#117740,0.15); +#117740 = AXIS2_PLACEMENT_3D('',#117741,#117742,#117743); +#117741 = CARTESIAN_POINT('',(-23.71734,-2.95,5.E-02)); +#117742 = DIRECTION('',(1.,0.,0.)); +#117743 = DIRECTION('',(0.,0.,-1.)); +#117744 = ADVANCED_FACE('',(#117745),#117770,.T.); +#117745 = FACE_BOUND('',#117746,.T.); +#117746 = EDGE_LOOP('',(#117747,#117755,#117756,#117764)); +#117747 = ORIENTED_EDGE('',*,*,#117748,.T.); +#117748 = EDGE_CURVE('',#117749,#117717,#117751,.T.); +#117749 = VERTEX_POINT('',#117750); +#117750 = CARTESIAN_POINT('',(6.575,-4.15,-0.1)); +#117751 = LINE('',#117752,#117753); +#117752 = CARTESIAN_POINT('',(6.575,-4.15,-0.1)); +#117753 = VECTOR('',#117754,1.); +#117754 = DIRECTION('',(0.,1.,0.)); +#117755 = ORIENTED_EDGE('',*,*,#117714,.F.); +#117756 = ORIENTED_EDGE('',*,*,#117757,.F.); +#117757 = EDGE_CURVE('',#117758,#117715,#117760,.T.); +#117758 = VERTEX_POINT('',#117759); +#117759 = CARTESIAN_POINT('',(6.075,-4.15,-0.1)); +#117760 = LINE('',#117761,#117762); +#117761 = CARTESIAN_POINT('',(6.075,-4.15,-0.1)); +#117762 = VECTOR('',#117763,1.); +#117763 = DIRECTION('',(0.,1.,0.)); +#117764 = ORIENTED_EDGE('',*,*,#117765,.F.); +#117765 = EDGE_CURVE('',#117749,#117758,#117766,.T.); +#117766 = LINE('',#117767,#117768); +#117767 = CARTESIAN_POINT('',(6.575,-4.15,-0.1)); +#117768 = VECTOR('',#117769,1.); +#117769 = DIRECTION('',(-1.,0.,0.)); +#117770 = PLANE('',#117771); +#117771 = AXIS2_PLACEMENT_3D('',#117772,#117773,#117774); +#117772 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#117773 = DIRECTION('',(0.,0.,1.)); +#117774 = DIRECTION('',(1.,0.,-0.)); +#117775 = ADVANCED_FACE('',(#117776),#117810,.T.); +#117776 = FACE_BOUND('',#117777,.T.); +#117777 = EDGE_LOOP('',(#117778,#117788,#117796,#117804)); +#117778 = ORIENTED_EDGE('',*,*,#117779,.T.); +#117779 = EDGE_CURVE('',#117780,#117782,#117784,.T.); +#117780 = VERTEX_POINT('',#117781); +#117781 = CARTESIAN_POINT('',(6.575,2.95,-0.1)); +#117782 = VERTEX_POINT('',#117783); +#117783 = CARTESIAN_POINT('',(6.575,4.15,-0.1)); +#117784 = LINE('',#117785,#117786); +#117785 = CARTESIAN_POINT('',(6.575,2.95,-0.1)); +#117786 = VECTOR('',#117787,1.); +#117787 = DIRECTION('',(0.,1.,0.)); +#117788 = ORIENTED_EDGE('',*,*,#117789,.F.); +#117789 = EDGE_CURVE('',#117790,#117782,#117792,.T.); +#117790 = VERTEX_POINT('',#117791); +#117791 = CARTESIAN_POINT('',(6.075,4.15,-0.1)); +#117792 = LINE('',#117793,#117794); +#117793 = CARTESIAN_POINT('',(6.075,4.15,-0.1)); +#117794 = VECTOR('',#117795,1.); +#117795 = DIRECTION('',(1.,0.,0.)); +#117796 = ORIENTED_EDGE('',*,*,#117797,.F.); +#117797 = EDGE_CURVE('',#117798,#117790,#117800,.T.); +#117798 = VERTEX_POINT('',#117799); +#117799 = CARTESIAN_POINT('',(6.075,2.95,-0.1)); +#117800 = LINE('',#117801,#117802); +#117801 = CARTESIAN_POINT('',(6.075,2.95,-0.1)); +#117802 = VECTOR('',#117803,1.); +#117803 = DIRECTION('',(0.,1.,0.)); +#117804 = ORIENTED_EDGE('',*,*,#117805,.F.); +#117805 = EDGE_CURVE('',#117780,#117798,#117806,.T.); +#117806 = LINE('',#117807,#117808); +#117807 = CARTESIAN_POINT('',(6.575,2.95,-0.1)); +#117808 = VECTOR('',#117809,1.); +#117809 = DIRECTION('',(-1.,0.,0.)); +#117810 = PLANE('',#117811); +#117811 = AXIS2_PLACEMENT_3D('',#117812,#117813,#117814); +#117812 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#117813 = DIRECTION('',(0.,0.,1.)); +#117814 = DIRECTION('',(1.,0.,-0.)); +#117815 = ADVANCED_FACE('',(#117816),#117835,.F.); +#117816 = FACE_BOUND('',#117817,.F.); +#117817 = EDGE_LOOP('',(#117818,#117819,#117826,#117827,#117828)); +#117818 = ORIENTED_EDGE('',*,*,#117765,.F.); +#117819 = ORIENTED_EDGE('',*,*,#117820,.T.); +#117820 = EDGE_CURVE('',#117749,#117486,#117821,.T.); +#117821 = CIRCLE('',#117822,0.15); +#117822 = AXIS2_PLACEMENT_3D('',#117823,#117824,#117825); +#117823 = CARTESIAN_POINT('',(6.575,-4.15,5.E-02)); +#117824 = DIRECTION('',(-1.,0.,0.)); +#117825 = DIRECTION('',(0.,0.,-1.)); +#117826 = ORIENTED_EDGE('',*,*,#117493,.T.); +#117827 = ORIENTED_EDGE('',*,*,#117608,.T.); +#117828 = ORIENTED_EDGE('',*,*,#117829,.T.); +#117829 = EDGE_CURVE('',#117609,#117758,#117830,.T.); +#117830 = CIRCLE('',#117831,0.15); +#117831 = AXIS2_PLACEMENT_3D('',#117832,#117833,#117834); +#117832 = CARTESIAN_POINT('',(6.075,-4.15,5.E-02)); +#117833 = DIRECTION('',(1.,0.,0.)); +#117834 = DIRECTION('',(0.,-1.,1.910906329006E-14)); +#117835 = CYLINDRICAL_SURFACE('',#117836,0.15); +#117836 = AXIS2_PLACEMENT_3D('',#117837,#117838,#117839); +#117837 = CARTESIAN_POINT('',(23.71734,-4.15,5.E-02)); +#117838 = DIRECTION('',(-1.,0.,0.)); +#117839 = DIRECTION('',(0.,0.,-1.)); +#117840 = ADVANCED_FACE('',(#117841),#118132,.T.); +#117841 = FACE_BOUND('',#117842,.T.); +#117842 = EDGE_LOOP('',(#117843,#117853,#117861,#117869,#117877,#117885, + #117894,#117902,#117911,#117919,#117927,#117935,#117943,#117951, + #117959,#117967,#117975,#117983,#117991,#117999,#118008,#118016, + #118025,#118033,#118041,#118049,#118057,#118065,#118073,#118082, + #118088,#118089,#118096,#118097,#118104,#118105,#118106,#118107, + #118108,#118109,#118117,#118126)); +#117843 = ORIENTED_EDGE('',*,*,#117844,.T.); +#117844 = EDGE_CURVE('',#117845,#117847,#117849,.T.); +#117845 = VERTEX_POINT('',#117846); +#117846 = CARTESIAN_POINT('',(6.575,-6.575,-1.2)); +#117847 = VERTEX_POINT('',#117848); +#117848 = CARTESIAN_POINT('',(6.575,-6.575,-5.7)); +#117849 = LINE('',#117850,#117851); +#117850 = CARTESIAN_POINT('',(6.575,-6.575,-1.2)); +#117851 = VECTOR('',#117852,1.); +#117852 = DIRECTION('',(0.,0.,-1.)); +#117853 = ORIENTED_EDGE('',*,*,#117854,.T.); +#117854 = EDGE_CURVE('',#117847,#117855,#117857,.T.); +#117855 = VERTEX_POINT('',#117856); +#117856 = CARTESIAN_POINT('',(6.575,-5.975,-5.7)); +#117857 = LINE('',#117858,#117859); +#117858 = CARTESIAN_POINT('',(6.575,-6.575,-5.7)); +#117859 = VECTOR('',#117860,1.); +#117860 = DIRECTION('',(0.,1.,0.)); +#117861 = ORIENTED_EDGE('',*,*,#117862,.T.); +#117862 = EDGE_CURVE('',#117855,#117863,#117865,.T.); +#117863 = VERTEX_POINT('',#117864); +#117864 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#117865 = LINE('',#117866,#117867); +#117866 = CARTESIAN_POINT('',(6.575,-5.975,-5.7)); +#117867 = VECTOR('',#117868,1.); +#117868 = DIRECTION('',(0.,0.,-1.)); +#117869 = ORIENTED_EDGE('',*,*,#117870,.T.); +#117870 = EDGE_CURVE('',#117863,#117871,#117873,.T.); +#117871 = VERTEX_POINT('',#117872); +#117872 = CARTESIAN_POINT('',(6.575,-5.5,-11.2)); +#117873 = LINE('',#117874,#117875); +#117874 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#117875 = VECTOR('',#117876,1.); +#117876 = DIRECTION('',(0.,1.,0.)); +#117877 = ORIENTED_EDGE('',*,*,#117878,.T.); +#117878 = EDGE_CURVE('',#117871,#117879,#117881,.T.); +#117879 = VERTEX_POINT('',#117880); +#117880 = CARTESIAN_POINT('',(6.575,-5.5,-13.00523257219)); +#117881 = LINE('',#117882,#117883); +#117882 = CARTESIAN_POINT('',(6.575,-5.5,-11.2)); +#117883 = VECTOR('',#117884,1.); +#117884 = DIRECTION('',(0.,0.,-1.)); +#117885 = ORIENTED_EDGE('',*,*,#117886,.T.); +#117886 = EDGE_CURVE('',#117879,#117887,#117889,.T.); +#117887 = VERTEX_POINT('',#117888); +#117888 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.3)); +#117889 = CIRCLE('',#117890,0.294767427805); +#117890 = AXIS2_PLACEMENT_3D('',#117891,#117892,#117893); +#117891 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.00523257219)); +#117892 = DIRECTION('',(1.,0.,0.)); +#117893 = DIRECTION('',(0.,-1.,0.)); +#117894 = ORIENTED_EDGE('',*,*,#117895,.T.); +#117895 = EDGE_CURVE('',#117887,#117896,#117898,.T.); +#117896 = VERTEX_POINT('',#117897); +#117897 = CARTESIAN_POINT('',(6.575,-4.794767427805,-13.3)); +#117898 = LINE('',#117899,#117900); +#117899 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.3)); +#117900 = VECTOR('',#117901,1.); +#117901 = DIRECTION('',(0.,1.,0.)); +#117902 = ORIENTED_EDGE('',*,*,#117903,.T.); +#117903 = EDGE_CURVE('',#117896,#117904,#117906,.T.); +#117904 = VERTEX_POINT('',#117905); +#117905 = CARTESIAN_POINT('',(6.575,-4.5,-13.00523257219)); +#117906 = CIRCLE('',#117907,0.294767427805); +#117907 = AXIS2_PLACEMENT_3D('',#117908,#117909,#117910); +#117908 = CARTESIAN_POINT('',(6.575,-4.794767427805,-13.00523257219)); +#117909 = DIRECTION('',(1.,0.,0.)); +#117910 = DIRECTION('',(0.,0.,-1.)); +#117911 = ORIENTED_EDGE('',*,*,#117912,.T.); +#117912 = EDGE_CURVE('',#117904,#117913,#117915,.T.); +#117913 = VERTEX_POINT('',#117914); +#117914 = CARTESIAN_POINT('',(6.575,-4.5,-9.6)); +#117915 = LINE('',#117916,#117917); +#117916 = CARTESIAN_POINT('',(6.575,-4.5,-13.00523257219)); +#117917 = VECTOR('',#117918,1.); +#117918 = DIRECTION('',(0.,0.,1.)); +#117919 = ORIENTED_EDGE('',*,*,#117920,.F.); +#117920 = EDGE_CURVE('',#117921,#117913,#117923,.T.); +#117921 = VERTEX_POINT('',#117922); +#117922 = CARTESIAN_POINT('',(6.575,-3.3,-9.6)); +#117923 = LINE('',#117924,#117925); +#117924 = CARTESIAN_POINT('',(6.575,-3.3,-9.6)); +#117925 = VECTOR('',#117926,1.); +#117926 = DIRECTION('',(0.,-1.,0.)); +#117927 = ORIENTED_EDGE('',*,*,#117928,.F.); +#117928 = EDGE_CURVE('',#117929,#117921,#117931,.T.); +#117929 = VERTEX_POINT('',#117930); +#117930 = CARTESIAN_POINT('',(6.575,-3.3,-11.2)); +#117931 = LINE('',#117932,#117933); +#117932 = CARTESIAN_POINT('',(6.575,-3.3,-11.2)); +#117933 = VECTOR('',#117934,1.); +#117934 = DIRECTION('',(0.,0.,1.)); +#117935 = ORIENTED_EDGE('',*,*,#117936,.T.); +#117936 = EDGE_CURVE('',#117929,#117937,#117939,.T.); +#117937 = VERTEX_POINT('',#117938); +#117938 = CARTESIAN_POINT('',(6.575,-1.9,-11.2)); +#117939 = LINE('',#117940,#117941); +#117940 = CARTESIAN_POINT('',(6.575,-3.3,-11.2)); +#117941 = VECTOR('',#117942,1.); +#117942 = DIRECTION('',(0.,1.,0.)); +#117943 = ORIENTED_EDGE('',*,*,#117944,.T.); +#117944 = EDGE_CURVE('',#117937,#117945,#117947,.T.); +#117945 = VERTEX_POINT('',#117946); +#117946 = CARTESIAN_POINT('',(6.575,-1.9,-8.2)); +#117947 = LINE('',#117948,#117949); +#117948 = CARTESIAN_POINT('',(6.575,-1.9,-11.2)); +#117949 = VECTOR('',#117950,1.); +#117950 = DIRECTION('',(0.,0.,1.)); +#117951 = ORIENTED_EDGE('',*,*,#117952,.F.); +#117952 = EDGE_CURVE('',#117953,#117945,#117955,.T.); +#117953 = VERTEX_POINT('',#117954); +#117954 = CARTESIAN_POINT('',(6.575,1.9,-8.2)); +#117955 = LINE('',#117956,#117957); +#117956 = CARTESIAN_POINT('',(6.575,1.9,-8.2)); +#117957 = VECTOR('',#117958,1.); +#117958 = DIRECTION('',(0.,-1.,0.)); +#117959 = ORIENTED_EDGE('',*,*,#117960,.F.); +#117960 = EDGE_CURVE('',#117961,#117953,#117963,.T.); +#117961 = VERTEX_POINT('',#117962); +#117962 = CARTESIAN_POINT('',(6.575,1.9,-11.2)); +#117963 = LINE('',#117964,#117965); +#117964 = CARTESIAN_POINT('',(6.575,1.9,-11.2)); +#117965 = VECTOR('',#117966,1.); +#117966 = DIRECTION('',(0.,0.,1.)); +#117967 = ORIENTED_EDGE('',*,*,#117968,.T.); +#117968 = EDGE_CURVE('',#117961,#117969,#117971,.T.); +#117969 = VERTEX_POINT('',#117970); +#117970 = CARTESIAN_POINT('',(6.575,3.3,-11.2)); +#117971 = LINE('',#117972,#117973); +#117972 = CARTESIAN_POINT('',(6.575,1.9,-11.2)); +#117973 = VECTOR('',#117974,1.); +#117974 = DIRECTION('',(0.,1.,0.)); +#117975 = ORIENTED_EDGE('',*,*,#117976,.F.); +#117976 = EDGE_CURVE('',#117977,#117969,#117979,.T.); +#117977 = VERTEX_POINT('',#117978); +#117978 = CARTESIAN_POINT('',(6.575,3.3,-9.6)); +#117979 = LINE('',#117980,#117981); +#117980 = CARTESIAN_POINT('',(6.575,3.3,-9.6)); +#117981 = VECTOR('',#117982,1.); +#117982 = DIRECTION('',(0.,0.,-1.)); +#117983 = ORIENTED_EDGE('',*,*,#117984,.F.); +#117984 = EDGE_CURVE('',#117985,#117977,#117987,.T.); +#117985 = VERTEX_POINT('',#117986); +#117986 = CARTESIAN_POINT('',(6.575,4.5,-9.6)); +#117987 = LINE('',#117988,#117989); +#117988 = CARTESIAN_POINT('',(6.575,4.5,-9.6)); +#117989 = VECTOR('',#117990,1.); +#117990 = DIRECTION('',(0.,-1.,0.)); +#117991 = ORIENTED_EDGE('',*,*,#117992,.T.); +#117992 = EDGE_CURVE('',#117985,#117993,#117995,.T.); +#117993 = VERTEX_POINT('',#117994); +#117994 = CARTESIAN_POINT('',(6.575,4.5,-13.00523257219)); +#117995 = LINE('',#117996,#117997); +#117996 = CARTESIAN_POINT('',(6.575,4.5,-9.6)); +#117997 = VECTOR('',#117998,1.); +#117998 = DIRECTION('',(0.,0.,-1.)); +#117999 = ORIENTED_EDGE('',*,*,#118000,.T.); +#118000 = EDGE_CURVE('',#117993,#118001,#118003,.T.); +#118001 = VERTEX_POINT('',#118002); +#118002 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.3)); +#118003 = CIRCLE('',#118004,0.294767427805); +#118004 = AXIS2_PLACEMENT_3D('',#118005,#118006,#118007); +#118005 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.00523257219)); +#118006 = DIRECTION('',(1.,0.,0.)); +#118007 = DIRECTION('',(0.,-1.,0.)); +#118008 = ORIENTED_EDGE('',*,*,#118009,.T.); +#118009 = EDGE_CURVE('',#118001,#118010,#118012,.T.); +#118010 = VERTEX_POINT('',#118011); +#118011 = CARTESIAN_POINT('',(6.575,5.205232572195,-13.3)); +#118012 = LINE('',#118013,#118014); +#118013 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.3)); +#118014 = VECTOR('',#118015,1.); +#118015 = DIRECTION('',(0.,1.,0.)); +#118016 = ORIENTED_EDGE('',*,*,#118017,.T.); +#118017 = EDGE_CURVE('',#118010,#118018,#118020,.T.); +#118018 = VERTEX_POINT('',#118019); +#118019 = CARTESIAN_POINT('',(6.575,5.5,-13.00523257219)); +#118020 = CIRCLE('',#118021,0.294767427805); +#118021 = AXIS2_PLACEMENT_3D('',#118022,#118023,#118024); +#118022 = CARTESIAN_POINT('',(6.575,5.205232572195,-13.00523257219)); +#118023 = DIRECTION('',(1.,0.,0.)); +#118024 = DIRECTION('',(0.,0.,-1.)); +#118025 = ORIENTED_EDGE('',*,*,#118026,.T.); +#118026 = EDGE_CURVE('',#118018,#118027,#118029,.T.); +#118027 = VERTEX_POINT('',#118028); +#118028 = CARTESIAN_POINT('',(6.575,5.5,-11.2)); +#118029 = LINE('',#118030,#118031); +#118030 = CARTESIAN_POINT('',(6.575,5.5,-13.00523257219)); +#118031 = VECTOR('',#118032,1.); +#118032 = DIRECTION('',(0.,0.,1.)); +#118033 = ORIENTED_EDGE('',*,*,#118034,.T.); +#118034 = EDGE_CURVE('',#118027,#118035,#118037,.T.); +#118035 = VERTEX_POINT('',#118036); +#118036 = CARTESIAN_POINT('',(6.575,5.975,-11.2)); +#118037 = LINE('',#118038,#118039); +#118038 = CARTESIAN_POINT('',(6.575,5.5,-11.2)); +#118039 = VECTOR('',#118040,1.); +#118040 = DIRECTION('',(0.,1.,0.)); +#118041 = ORIENTED_EDGE('',*,*,#118042,.T.); +#118042 = EDGE_CURVE('',#118035,#118043,#118045,.T.); +#118043 = VERTEX_POINT('',#118044); +#118044 = CARTESIAN_POINT('',(6.575,5.975,-5.7)); +#118045 = LINE('',#118046,#118047); +#118046 = CARTESIAN_POINT('',(6.575,5.975,-11.2)); +#118047 = VECTOR('',#118048,1.); +#118048 = DIRECTION('',(0.,0.,1.)); +#118049 = ORIENTED_EDGE('',*,*,#118050,.T.); +#118050 = EDGE_CURVE('',#118043,#118051,#118053,.T.); +#118051 = VERTEX_POINT('',#118052); +#118052 = CARTESIAN_POINT('',(6.575,6.575,-5.7)); +#118053 = LINE('',#118054,#118055); +#118054 = CARTESIAN_POINT('',(6.575,5.975,-5.7)); +#118055 = VECTOR('',#118056,1.); +#118056 = DIRECTION('',(0.,1.,0.)); +#118057 = ORIENTED_EDGE('',*,*,#118058,.T.); +#118058 = EDGE_CURVE('',#118051,#118059,#118061,.T.); +#118059 = VERTEX_POINT('',#118060); +#118060 = CARTESIAN_POINT('',(6.575,6.575,-1.2)); +#118061 = LINE('',#118062,#118063); +#118062 = CARTESIAN_POINT('',(6.575,6.575,-5.7)); +#118063 = VECTOR('',#118064,1.); +#118064 = DIRECTION('',(0.,0.,1.)); +#118065 = ORIENTED_EDGE('',*,*,#118066,.T.); +#118066 = EDGE_CURVE('',#118059,#118067,#118069,.T.); +#118067 = VERTEX_POINT('',#118068); +#118068 = CARTESIAN_POINT('',(6.575,5.707414107351,-0.419172696616)); +#118069 = LINE('',#118070,#118071); +#118070 = CARTESIAN_POINT('',(6.575,6.575,-1.2)); +#118071 = VECTOR('',#118072,1.); +#118072 = DIRECTION('',(0.,-0.743294146247,0.668964731622)); +#118073 = ORIENTED_EDGE('',*,*,#118074,.T.); +#118074 = EDGE_CURVE('',#118067,#118075,#118077,.T.); +#118075 = VERTEX_POINT('',#118076); +#118076 = CARTESIAN_POINT('',(6.575,5.575,-0.121855038117)); +#118077 = CIRCLE('',#118078,0.4); +#118078 = AXIS2_PLACEMENT_3D('',#118079,#118080,#118081); +#118079 = CARTESIAN_POINT('',(6.575,5.975,-0.121855038117)); +#118080 = DIRECTION('',(-1.,0.,0.)); +#118081 = DIRECTION('',(-0.,-0.668964731622,-0.743294146247)); +#118082 = ORIENTED_EDGE('',*,*,#118083,.T.); +#118083 = EDGE_CURVE('',#118075,#104963,#118084,.T.); +#118084 = LINE('',#118085,#118086); +#118085 = CARTESIAN_POINT('',(6.575,5.575,-0.121855038117)); +#118086 = VECTOR('',#118087,1.); +#118087 = DIRECTION('',(0.,0.,1.)); +#118088 = ORIENTED_EDGE('',*,*,#117592,.F.); +#118089 = ORIENTED_EDGE('',*,*,#118090,.T.); +#118090 = EDGE_CURVE('',#117583,#117782,#118091,.T.); +#118091 = CIRCLE('',#118092,0.15); +#118092 = AXIS2_PLACEMENT_3D('',#118093,#118094,#118095); +#118093 = CARTESIAN_POINT('',(6.575,4.15,5.E-02)); +#118094 = DIRECTION('',(-1.,0.,0.)); +#118095 = DIRECTION('',(0.,0.942809041582,-0.333333333333)); +#118096 = ORIENTED_EDGE('',*,*,#117779,.F.); +#118097 = ORIENTED_EDGE('',*,*,#118098,.T.); +#118098 = EDGE_CURVE('',#117780,#117519,#118099,.T.); +#118099 = CIRCLE('',#118100,0.15); +#118100 = AXIS2_PLACEMENT_3D('',#118101,#118102,#118103); +#118101 = CARTESIAN_POINT('',(6.575,2.95,5.E-02)); +#118102 = DIRECTION('',(-1.,0.,0.)); +#118103 = DIRECTION('',(0.,0.,-1.)); +#118104 = ORIENTED_EDGE('',*,*,#117557,.F.); +#118105 = ORIENTED_EDGE('',*,*,#117733,.T.); +#118106 = ORIENTED_EDGE('',*,*,#117748,.F.); +#118107 = ORIENTED_EDGE('',*,*,#117820,.T.); +#118108 = ORIENTED_EDGE('',*,*,#117485,.F.); +#118109 = ORIENTED_EDGE('',*,*,#118110,.T.); +#118110 = EDGE_CURVE('',#105088,#118111,#118113,.T.); +#118111 = VERTEX_POINT('',#118112); +#118112 = CARTESIAN_POINT('',(6.575,-5.575,-0.121855038117)); +#118113 = LINE('',#118114,#118115); +#118114 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#118115 = VECTOR('',#118116,1.); +#118116 = DIRECTION('',(-7.288811635732E-14,2.18664349072E-14,-1.)); +#118117 = ORIENTED_EDGE('',*,*,#118118,.T.); +#118118 = EDGE_CURVE('',#118111,#118119,#118121,.T.); +#118119 = VERTEX_POINT('',#118120); +#118120 = CARTESIAN_POINT('',(6.575,-5.707414107351,-0.419172696616)); +#118121 = CIRCLE('',#118122,0.4); +#118122 = AXIS2_PLACEMENT_3D('',#118123,#118124,#118125); +#118123 = CARTESIAN_POINT('',(6.575,-5.975,-0.121855038117)); +#118124 = DIRECTION('',(-1.,0.,0.)); +#118125 = DIRECTION('',(0.,1.,0.)); +#118126 = ORIENTED_EDGE('',*,*,#118127,.T.); +#118127 = EDGE_CURVE('',#118119,#117845,#118128,.T.); +#118128 = LINE('',#118129,#118130); +#118129 = CARTESIAN_POINT('',(6.575,-5.707414107351,-0.419172696616)); +#118130 = VECTOR('',#118131,1.); +#118131 = DIRECTION('',(0.,-0.743294146247,-0.668964731622)); +#118132 = PLANE('',#118133); +#118133 = AXIS2_PLACEMENT_3D('',#118134,#118135,#118136); +#118134 = CARTESIAN_POINT('',(6.575,-5.575,0.)); +#118135 = DIRECTION('',(1.,0.,0.)); +#118136 = DIRECTION('',(-0.,1.,0.)); +#118137 = ADVANCED_FACE('',(#118138),#118163,.T.); +#118138 = FACE_BOUND('',#118139,.T.); +#118139 = EDGE_LOOP('',(#118140,#118150,#118156,#118157)); +#118140 = ORIENTED_EDGE('',*,*,#118141,.T.); +#118141 = EDGE_CURVE('',#118142,#118144,#118146,.T.); +#118142 = VERTEX_POINT('',#118143); +#118143 = CARTESIAN_POINT('',(6.075,-5.707414107351,-0.419172696616)); +#118144 = VERTEX_POINT('',#118145); +#118145 = CARTESIAN_POINT('',(6.075,-6.575,-1.2)); +#118146 = LINE('',#118147,#118148); +#118147 = CARTESIAN_POINT('',(6.075,-5.707414107351,-0.419172696616)); +#118148 = VECTOR('',#118149,1.); +#118149 = DIRECTION('',(0.,-0.743294146247,-0.668964731622)); +#118150 = ORIENTED_EDGE('',*,*,#118151,.F.); +#118151 = EDGE_CURVE('',#117845,#118144,#118152,.T.); +#118152 = LINE('',#118153,#118154); +#118153 = CARTESIAN_POINT('',(6.575,-6.575,-1.2)); +#118154 = VECTOR('',#118155,1.); +#118155 = DIRECTION('',(-1.,0.,0.)); +#118156 = ORIENTED_EDGE('',*,*,#118127,.F.); +#118157 = ORIENTED_EDGE('',*,*,#118158,.F.); +#118158 = EDGE_CURVE('',#118142,#118119,#118159,.T.); +#118159 = LINE('',#118160,#118161); +#118160 = CARTESIAN_POINT('',(6.075,-5.707414107351,-0.419172696616)); +#118161 = VECTOR('',#118162,1.); +#118162 = DIRECTION('',(1.,0.,0.)); +#118163 = PLANE('',#118164); +#118164 = AXIS2_PLACEMENT_3D('',#118165,#118166,#118167); +#118165 = CARTESIAN_POINT('',(6.575,-5.575,-0.3)); +#118166 = DIRECTION('',(0.,-0.668964731622,0.743294146247)); +#118167 = DIRECTION('',(-1.,0.,0.)); +#118168 = ADVANCED_FACE('',(#118169),#118188,.F.); +#118169 = FACE_BOUND('',#118170,.F.); +#118170 = EDGE_LOOP('',(#118171,#118172,#118181,#118187)); +#118171 = ORIENTED_EDGE('',*,*,#118158,.F.); +#118172 = ORIENTED_EDGE('',*,*,#118173,.T.); +#118173 = EDGE_CURVE('',#118142,#118174,#118176,.T.); +#118174 = VERTEX_POINT('',#118175); +#118175 = CARTESIAN_POINT('',(6.075,-5.575,-0.121855038117)); +#118176 = CIRCLE('',#118177,0.4); +#118177 = AXIS2_PLACEMENT_3D('',#118178,#118179,#118180); +#118178 = CARTESIAN_POINT('',(6.075,-5.975,-0.121855038117)); +#118179 = DIRECTION('',(1.,0.,0.)); +#118180 = DIRECTION('',(0.,0.668964731622,-0.743294146247)); +#118181 = ORIENTED_EDGE('',*,*,#118182,.T.); +#118182 = EDGE_CURVE('',#118174,#118111,#118183,.T.); +#118183 = LINE('',#118184,#118185); +#118184 = CARTESIAN_POINT('',(6.075,-5.575,-0.121855038117)); +#118185 = VECTOR('',#118186,1.); +#118186 = DIRECTION('',(1.,0.,0.)); +#118187 = ORIENTED_EDGE('',*,*,#118118,.T.); +#118188 = CYLINDRICAL_SURFACE('',#118189,0.4); +#118189 = AXIS2_PLACEMENT_3D('',#118190,#118191,#118192); +#118190 = CARTESIAN_POINT('',(-23.740376,-5.975,-0.121855038117)); +#118191 = DIRECTION('',(1.,0.,0.)); +#118192 = DIRECTION('',(0.,0.668964731622,-0.743294146247)); +#118193 = ADVANCED_FACE('',(#118194),#118486,.F.); +#118194 = FACE_BOUND('',#118195,.T.); +#118195 = EDGE_LOOP('',(#118196,#118197,#118198,#118199,#118200,#118201, + #118202,#118203,#118211,#118218,#118219,#118228,#118234,#118235, + #118243,#118252,#118260,#118268,#118276,#118284,#118292,#118300, + #118309,#118317,#118326,#118334,#118342,#118350,#118358,#118366, + #118374,#118382,#118390,#118398,#118406,#118414,#118423,#118431, + #118440,#118448,#118456,#118464,#118472,#118478,#118479,#118480)); +#118196 = ORIENTED_EDGE('',*,*,#105079,.T.); +#118197 = ORIENTED_EDGE('',*,*,#117616,.F.); +#118198 = ORIENTED_EDGE('',*,*,#117829,.T.); +#118199 = ORIENTED_EDGE('',*,*,#117757,.T.); +#118200 = ORIENTED_EDGE('',*,*,#117724,.T.); +#118201 = ORIENTED_EDGE('',*,*,#117689,.T.); +#118202 = ORIENTED_EDGE('',*,*,#105029,.T.); +#118203 = ORIENTED_EDGE('',*,*,#118204,.F.); +#118204 = EDGE_CURVE('',#118205,#105022,#118207,.T.); +#118205 = VERTEX_POINT('',#118206); +#118206 = CARTESIAN_POINT('',(6.075,2.8,5.E-02)); +#118207 = LINE('',#118208,#118209); +#118208 = CARTESIAN_POINT('',(6.075,2.8,5.E-02)); +#118209 = VECTOR('',#118210,1.); +#118210 = DIRECTION('',(1.7763568394E-14,0.,-1.)); +#118211 = ORIENTED_EDGE('',*,*,#118212,.T.); +#118212 = EDGE_CURVE('',#118205,#117798,#118213,.T.); +#118213 = CIRCLE('',#118214,0.15); +#118214 = AXIS2_PLACEMENT_3D('',#118215,#118216,#118217); +#118215 = CARTESIAN_POINT('',(6.075,2.95,5.E-02)); +#118216 = DIRECTION('',(1.,0.,0.)); +#118217 = DIRECTION('',(0.,-1.,1.91994134711E-14)); +#118218 = ORIENTED_EDGE('',*,*,#117797,.T.); +#118219 = ORIENTED_EDGE('',*,*,#118220,.T.); +#118220 = EDGE_CURVE('',#117790,#118221,#118223,.T.); +#118221 = VERTEX_POINT('',#118222); +#118222 = CARTESIAN_POINT('',(6.075,4.3,5.E-02)); +#118223 = CIRCLE('',#118224,0.15); +#118224 = AXIS2_PLACEMENT_3D('',#118225,#118226,#118227); +#118225 = CARTESIAN_POINT('',(6.075,4.15,5.E-02)); +#118226 = DIRECTION('',(1.,0.,0.)); +#118227 = DIRECTION('',(0.,1.156482317318E-14,-1.)); +#118228 = ORIENTED_EDGE('',*,*,#118229,.T.); +#118229 = EDGE_CURVE('',#118221,#104980,#118230,.T.); +#118230 = LINE('',#118231,#118232); +#118231 = CARTESIAN_POINT('',(6.075,4.3,5.E-02)); +#118232 = VECTOR('',#118233,1.); +#118233 = DIRECTION('',(1.7763568394E-14,1.7763568394E-14,-1.)); +#118234 = ORIENTED_EDGE('',*,*,#104979,.T.); +#118235 = ORIENTED_EDGE('',*,*,#118236,.F.); +#118236 = EDGE_CURVE('',#118237,#104972,#118239,.T.); +#118237 = VERTEX_POINT('',#118238); +#118238 = CARTESIAN_POINT('',(6.075,5.575,-0.121855038117)); +#118239 = LINE('',#118240,#118241); +#118240 = CARTESIAN_POINT('',(6.075,5.575,-0.121855038117)); +#118241 = VECTOR('',#118242,1.); +#118242 = DIRECTION('',(0.,0.,1.)); +#118243 = ORIENTED_EDGE('',*,*,#118244,.T.); +#118244 = EDGE_CURVE('',#118237,#118245,#118247,.T.); +#118245 = VERTEX_POINT('',#118246); +#118246 = CARTESIAN_POINT('',(6.075,5.707414107351,-0.419172696616)); +#118247 = CIRCLE('',#118248,0.4); +#118248 = AXIS2_PLACEMENT_3D('',#118249,#118250,#118251); +#118249 = CARTESIAN_POINT('',(6.075,5.975,-0.121855038117)); +#118250 = DIRECTION('',(1.,0.,0.)); +#118251 = DIRECTION('',(0.,-1.,0.)); +#118252 = ORIENTED_EDGE('',*,*,#118253,.F.); +#118253 = EDGE_CURVE('',#118254,#118245,#118256,.T.); +#118254 = VERTEX_POINT('',#118255); +#118255 = CARTESIAN_POINT('',(6.075,6.575,-1.2)); +#118256 = LINE('',#118257,#118258); +#118257 = CARTESIAN_POINT('',(6.075,6.575,-1.2)); +#118258 = VECTOR('',#118259,1.); +#118259 = DIRECTION('',(0.,-0.743294146247,0.668964731622)); +#118260 = ORIENTED_EDGE('',*,*,#118261,.F.); +#118261 = EDGE_CURVE('',#118262,#118254,#118264,.T.); +#118262 = VERTEX_POINT('',#118263); +#118263 = CARTESIAN_POINT('',(6.075,6.575,-5.7)); +#118264 = LINE('',#118265,#118266); +#118265 = CARTESIAN_POINT('',(6.075,6.575,-5.7)); +#118266 = VECTOR('',#118267,1.); +#118267 = DIRECTION('',(0.,0.,1.)); +#118268 = ORIENTED_EDGE('',*,*,#118269,.F.); +#118269 = EDGE_CURVE('',#118270,#118262,#118272,.T.); +#118270 = VERTEX_POINT('',#118271); +#118271 = CARTESIAN_POINT('',(6.075,5.975,-5.7)); +#118272 = LINE('',#118273,#118274); +#118273 = CARTESIAN_POINT('',(6.075,5.975,-5.7)); +#118274 = VECTOR('',#118275,1.); +#118275 = DIRECTION('',(0.,1.,0.)); +#118276 = ORIENTED_EDGE('',*,*,#118277,.F.); +#118277 = EDGE_CURVE('',#118278,#118270,#118280,.T.); +#118278 = VERTEX_POINT('',#118279); +#118279 = CARTESIAN_POINT('',(6.075,5.975,-11.2)); +#118280 = LINE('',#118281,#118282); +#118281 = CARTESIAN_POINT('',(6.075,5.975,-11.2)); +#118282 = VECTOR('',#118283,1.); +#118283 = DIRECTION('',(0.,0.,1.)); +#118284 = ORIENTED_EDGE('',*,*,#118285,.F.); +#118285 = EDGE_CURVE('',#118286,#118278,#118288,.T.); +#118286 = VERTEX_POINT('',#118287); +#118287 = CARTESIAN_POINT('',(6.075,5.5,-11.2)); +#118288 = LINE('',#118289,#118290); +#118289 = CARTESIAN_POINT('',(6.075,5.5,-11.2)); +#118290 = VECTOR('',#118291,1.); +#118291 = DIRECTION('',(0.,1.,0.)); +#118292 = ORIENTED_EDGE('',*,*,#118293,.F.); +#118293 = EDGE_CURVE('',#118294,#118286,#118296,.T.); +#118294 = VERTEX_POINT('',#118295); +#118295 = CARTESIAN_POINT('',(6.075,5.5,-13.00523257219)); +#118296 = LINE('',#118297,#118298); +#118297 = CARTESIAN_POINT('',(6.075,5.5,-13.00523257219)); +#118298 = VECTOR('',#118299,1.); +#118299 = DIRECTION('',(0.,0.,1.)); +#118300 = ORIENTED_EDGE('',*,*,#118301,.F.); +#118301 = EDGE_CURVE('',#118302,#118294,#118304,.T.); +#118302 = VERTEX_POINT('',#118303); +#118303 = CARTESIAN_POINT('',(6.075,5.205232572195,-13.3)); +#118304 = CIRCLE('',#118305,0.294767427805); +#118305 = AXIS2_PLACEMENT_3D('',#118306,#118307,#118308); +#118306 = CARTESIAN_POINT('',(6.075,5.205232572195,-13.00523257219)); +#118307 = DIRECTION('',(1.,0.,0.)); +#118308 = DIRECTION('',(0.,0.,-1.)); +#118309 = ORIENTED_EDGE('',*,*,#118310,.F.); +#118310 = EDGE_CURVE('',#118311,#118302,#118313,.T.); +#118311 = VERTEX_POINT('',#118312); +#118312 = CARTESIAN_POINT('',(6.075,4.794767427805,-13.3)); +#118313 = LINE('',#118314,#118315); +#118314 = CARTESIAN_POINT('',(6.075,4.794767427805,-13.3)); +#118315 = VECTOR('',#118316,1.); +#118316 = DIRECTION('',(0.,1.,0.)); +#118317 = ORIENTED_EDGE('',*,*,#118318,.F.); +#118318 = EDGE_CURVE('',#118319,#118311,#118321,.T.); +#118319 = VERTEX_POINT('',#118320); +#118320 = CARTESIAN_POINT('',(6.075,4.5,-13.00523257219)); +#118321 = CIRCLE('',#118322,0.294767427805); +#118322 = AXIS2_PLACEMENT_3D('',#118323,#118324,#118325); +#118323 = CARTESIAN_POINT('',(6.075,4.794767427805,-13.00523257219)); +#118324 = DIRECTION('',(1.,0.,0.)); +#118325 = DIRECTION('',(0.,-1.,1.765517468019E-14)); +#118326 = ORIENTED_EDGE('',*,*,#118327,.T.); +#118327 = EDGE_CURVE('',#118319,#118328,#118330,.T.); +#118328 = VERTEX_POINT('',#118329); +#118329 = CARTESIAN_POINT('',(6.075,4.5,-9.6)); +#118330 = LINE('',#118331,#118332); +#118331 = CARTESIAN_POINT('',(6.075,4.5,-13.00523257219)); +#118332 = VECTOR('',#118333,1.); +#118333 = DIRECTION('',(0.,0.,1.)); +#118334 = ORIENTED_EDGE('',*,*,#118335,.T.); +#118335 = EDGE_CURVE('',#118328,#118336,#118338,.T.); +#118336 = VERTEX_POINT('',#118337); +#118337 = CARTESIAN_POINT('',(6.075,3.3,-9.6)); +#118338 = LINE('',#118339,#118340); +#118339 = CARTESIAN_POINT('',(6.075,4.5,-9.6)); +#118340 = VECTOR('',#118341,1.); +#118341 = DIRECTION('',(0.,-1.,0.)); +#118342 = ORIENTED_EDGE('',*,*,#118343,.T.); +#118343 = EDGE_CURVE('',#118336,#118344,#118346,.T.); +#118344 = VERTEX_POINT('',#118345); +#118345 = CARTESIAN_POINT('',(6.075,3.3,-11.2)); +#118346 = LINE('',#118347,#118348); +#118347 = CARTESIAN_POINT('',(6.075,3.3,-9.6)); +#118348 = VECTOR('',#118349,1.); +#118349 = DIRECTION('',(0.,0.,-1.)); +#118350 = ORIENTED_EDGE('',*,*,#118351,.F.); +#118351 = EDGE_CURVE('',#118352,#118344,#118354,.T.); +#118352 = VERTEX_POINT('',#118353); +#118353 = CARTESIAN_POINT('',(6.075,1.9,-11.2)); +#118354 = LINE('',#118355,#118356); +#118355 = CARTESIAN_POINT('',(6.075,1.9,-11.2)); +#118356 = VECTOR('',#118357,1.); +#118357 = DIRECTION('',(0.,1.,0.)); +#118358 = ORIENTED_EDGE('',*,*,#118359,.T.); +#118359 = EDGE_CURVE('',#118352,#118360,#118362,.T.); +#118360 = VERTEX_POINT('',#118361); +#118361 = CARTESIAN_POINT('',(6.075,1.9,-8.2)); +#118362 = LINE('',#118363,#118364); +#118363 = CARTESIAN_POINT('',(6.075,1.9,-11.2)); +#118364 = VECTOR('',#118365,1.); +#118365 = DIRECTION('',(0.,0.,1.)); +#118366 = ORIENTED_EDGE('',*,*,#118367,.T.); +#118367 = EDGE_CURVE('',#118360,#118368,#118370,.T.); +#118368 = VERTEX_POINT('',#118369); +#118369 = CARTESIAN_POINT('',(6.075,-1.9,-8.2)); +#118370 = LINE('',#118371,#118372); +#118371 = CARTESIAN_POINT('',(6.075,1.9,-8.2)); +#118372 = VECTOR('',#118373,1.); +#118373 = DIRECTION('',(0.,-1.,0.)); +#118374 = ORIENTED_EDGE('',*,*,#118375,.F.); +#118375 = EDGE_CURVE('',#118376,#118368,#118378,.T.); +#118376 = VERTEX_POINT('',#118377); +#118377 = CARTESIAN_POINT('',(6.075,-1.9,-11.2)); +#118378 = LINE('',#118379,#118380); +#118379 = CARTESIAN_POINT('',(6.075,-1.9,-11.2)); +#118380 = VECTOR('',#118381,1.); +#118381 = DIRECTION('',(0.,0.,1.)); +#118382 = ORIENTED_EDGE('',*,*,#118383,.F.); +#118383 = EDGE_CURVE('',#118384,#118376,#118386,.T.); +#118384 = VERTEX_POINT('',#118385); +#118385 = CARTESIAN_POINT('',(6.075,-3.3,-11.2)); +#118386 = LINE('',#118387,#118388); +#118387 = CARTESIAN_POINT('',(6.075,-3.3,-11.2)); +#118388 = VECTOR('',#118389,1.); +#118389 = DIRECTION('',(0.,1.,0.)); +#118390 = ORIENTED_EDGE('',*,*,#118391,.T.); +#118391 = EDGE_CURVE('',#118384,#118392,#118394,.T.); +#118392 = VERTEX_POINT('',#118393); +#118393 = CARTESIAN_POINT('',(6.075,-3.3,-9.6)); +#118394 = LINE('',#118395,#118396); +#118395 = CARTESIAN_POINT('',(6.075,-3.3,-11.2)); +#118396 = VECTOR('',#118397,1.); +#118397 = DIRECTION('',(0.,0.,1.)); +#118398 = ORIENTED_EDGE('',*,*,#118399,.T.); +#118399 = EDGE_CURVE('',#118392,#118400,#118402,.T.); +#118400 = VERTEX_POINT('',#118401); +#118401 = CARTESIAN_POINT('',(6.075,-4.5,-9.6)); +#118402 = LINE('',#118403,#118404); +#118403 = CARTESIAN_POINT('',(6.075,-3.3,-9.6)); +#118404 = VECTOR('',#118405,1.); +#118405 = DIRECTION('',(0.,-1.,0.)); +#118406 = ORIENTED_EDGE('',*,*,#118407,.T.); +#118407 = EDGE_CURVE('',#118400,#118408,#118410,.T.); +#118408 = VERTEX_POINT('',#118409); +#118409 = CARTESIAN_POINT('',(6.075,-4.5,-13.00523257219)); +#118410 = LINE('',#118411,#118412); +#118411 = CARTESIAN_POINT('',(6.075,-4.5,-9.6)); +#118412 = VECTOR('',#118413,1.); +#118413 = DIRECTION('',(0.,0.,-1.)); +#118414 = ORIENTED_EDGE('',*,*,#118415,.F.); +#118415 = EDGE_CURVE('',#118416,#118408,#118418,.T.); +#118416 = VERTEX_POINT('',#118417); +#118417 = CARTESIAN_POINT('',(6.075,-4.794767427805,-13.3)); +#118418 = CIRCLE('',#118419,0.294767427805); +#118419 = AXIS2_PLACEMENT_3D('',#118420,#118421,#118422); +#118420 = CARTESIAN_POINT('',(6.075,-4.794767427805,-13.00523257219)); +#118421 = DIRECTION('',(1.,0.,0.)); +#118422 = DIRECTION('',(0.,0.,-1.)); +#118423 = ORIENTED_EDGE('',*,*,#118424,.F.); +#118424 = EDGE_CURVE('',#118425,#118416,#118427,.T.); +#118425 = VERTEX_POINT('',#118426); +#118426 = CARTESIAN_POINT('',(6.075,-5.205232572195,-13.3)); +#118427 = LINE('',#118428,#118429); +#118428 = CARTESIAN_POINT('',(6.075,-5.205232572195,-13.3)); +#118429 = VECTOR('',#118430,1.); +#118430 = DIRECTION('',(0.,1.,0.)); +#118431 = ORIENTED_EDGE('',*,*,#118432,.F.); +#118432 = EDGE_CURVE('',#118433,#118425,#118435,.T.); +#118433 = VERTEX_POINT('',#118434); +#118434 = CARTESIAN_POINT('',(6.075,-5.5,-13.00523257219)); +#118435 = CIRCLE('',#118436,0.294767427805); +#118436 = AXIS2_PLACEMENT_3D('',#118437,#118438,#118439); +#118437 = CARTESIAN_POINT('',(6.075,-5.205232572195,-13.00523257219)); +#118438 = DIRECTION('',(1.,0.,0.)); +#118439 = DIRECTION('',(0.,-1.,0.)); +#118440 = ORIENTED_EDGE('',*,*,#118441,.F.); +#118441 = EDGE_CURVE('',#118442,#118433,#118444,.T.); +#118442 = VERTEX_POINT('',#118443); +#118443 = CARTESIAN_POINT('',(6.075,-5.5,-11.2)); +#118444 = LINE('',#118445,#118446); +#118445 = CARTESIAN_POINT('',(6.075,-5.5,-11.2)); +#118446 = VECTOR('',#118447,1.); +#118447 = DIRECTION('',(0.,0.,-1.)); +#118448 = ORIENTED_EDGE('',*,*,#118449,.F.); +#118449 = EDGE_CURVE('',#118450,#118442,#118452,.T.); +#118450 = VERTEX_POINT('',#118451); +#118451 = CARTESIAN_POINT('',(6.075,-5.975,-11.2)); +#118452 = LINE('',#118453,#118454); +#118453 = CARTESIAN_POINT('',(6.075,-5.975,-11.2)); +#118454 = VECTOR('',#118455,1.); +#118455 = DIRECTION('',(0.,1.,0.)); +#118456 = ORIENTED_EDGE('',*,*,#118457,.F.); +#118457 = EDGE_CURVE('',#118458,#118450,#118460,.T.); +#118458 = VERTEX_POINT('',#118459); +#118459 = CARTESIAN_POINT('',(6.075,-5.975,-5.7)); +#118460 = LINE('',#118461,#118462); +#118461 = CARTESIAN_POINT('',(6.075,-5.975,-5.7)); +#118462 = VECTOR('',#118463,1.); +#118463 = DIRECTION('',(0.,0.,-1.)); +#118464 = ORIENTED_EDGE('',*,*,#118465,.F.); +#118465 = EDGE_CURVE('',#118466,#118458,#118468,.T.); +#118466 = VERTEX_POINT('',#118467); +#118467 = CARTESIAN_POINT('',(6.075,-6.575,-5.7)); +#118468 = LINE('',#118469,#118470); +#118469 = CARTESIAN_POINT('',(6.075,-6.575,-5.7)); +#118470 = VECTOR('',#118471,1.); +#118471 = DIRECTION('',(0.,1.,0.)); +#118472 = ORIENTED_EDGE('',*,*,#118473,.F.); +#118473 = EDGE_CURVE('',#118144,#118466,#118474,.T.); +#118474 = LINE('',#118475,#118476); +#118475 = CARTESIAN_POINT('',(6.075,-6.575,-1.2)); +#118476 = VECTOR('',#118477,1.); +#118477 = DIRECTION('',(0.,0.,-1.)); +#118478 = ORIENTED_EDGE('',*,*,#118141,.F.); +#118479 = ORIENTED_EDGE('',*,*,#118173,.T.); +#118480 = ORIENTED_EDGE('',*,*,#118481,.F.); +#118481 = EDGE_CURVE('',#105080,#118174,#118482,.T.); +#118482 = LINE('',#118483,#118484); +#118483 = CARTESIAN_POINT('',(6.075,-5.575,0.)); +#118484 = VECTOR('',#118485,1.); +#118485 = DIRECTION('',(1.457762327146E-14,0.,-1.)); +#118486 = PLANE('',#118487); +#118487 = AXIS2_PLACEMENT_3D('',#118488,#118489,#118490); +#118488 = CARTESIAN_POINT('',(6.075,0.,0.)); +#118489 = DIRECTION('',(1.,0.,0.)); +#118490 = DIRECTION('',(-0.,1.,0.)); +#118491 = ADVANCED_FACE('',(#118492),#118498,.T.); +#118492 = FACE_BOUND('',#118493,.T.); +#118493 = EDGE_LOOP('',(#118494,#118495,#118496,#118497)); +#118494 = ORIENTED_EDGE('',*,*,#118110,.F.); +#118495 = ORIENTED_EDGE('',*,*,#105087,.T.); +#118496 = ORIENTED_EDGE('',*,*,#118481,.T.); +#118497 = ORIENTED_EDGE('',*,*,#118182,.T.); +#118498 = PLANE('',#118499); +#118499 = AXIS2_PLACEMENT_3D('',#118500,#118501,#118502); +#118500 = CARTESIAN_POINT('',(6.575,-5.575,0.5)); +#118501 = DIRECTION('',(0.,-1.,0.)); +#118502 = DIRECTION('',(0.,0.,-1.)); +#118503 = ADVANCED_FACE('',(#118504),#118515,.T.); +#118504 = FACE_BOUND('',#118505,.T.); +#118505 = EDGE_LOOP('',(#118506,#118507,#118508,#118514)); +#118506 = ORIENTED_EDGE('',*,*,#118151,.T.); +#118507 = ORIENTED_EDGE('',*,*,#118473,.T.); +#118508 = ORIENTED_EDGE('',*,*,#118509,.F.); +#118509 = EDGE_CURVE('',#117847,#118466,#118510,.T.); +#118510 = LINE('',#118511,#118512); +#118511 = CARTESIAN_POINT('',(6.575,-6.575,-5.7)); +#118512 = VECTOR('',#118513,1.); +#118513 = DIRECTION('',(-1.,0.,0.)); +#118514 = ORIENTED_EDGE('',*,*,#117844,.F.); +#118515 = PLANE('',#118516); +#118516 = AXIS2_PLACEMENT_3D('',#118517,#118518,#118519); +#118517 = CARTESIAN_POINT('',(6.575,-6.575,-1.2)); +#118518 = DIRECTION('',(0.,-1.,0.)); +#118519 = DIRECTION('',(0.,0.,-1.)); +#118520 = ADVANCED_FACE('',(#118521),#118532,.T.); +#118521 = FACE_BOUND('',#118522,.T.); +#118522 = EDGE_LOOP('',(#118523,#118524,#118525,#118531)); +#118523 = ORIENTED_EDGE('',*,*,#118509,.T.); +#118524 = ORIENTED_EDGE('',*,*,#118465,.T.); +#118525 = ORIENTED_EDGE('',*,*,#118526,.F.); +#118526 = EDGE_CURVE('',#117855,#118458,#118527,.T.); +#118527 = LINE('',#118528,#118529); +#118528 = CARTESIAN_POINT('',(6.575,-5.975,-5.7)); +#118529 = VECTOR('',#118530,1.); +#118530 = DIRECTION('',(-1.,0.,0.)); +#118531 = ORIENTED_EDGE('',*,*,#117854,.F.); +#118532 = PLANE('',#118533); +#118533 = AXIS2_PLACEMENT_3D('',#118534,#118535,#118536); +#118534 = CARTESIAN_POINT('',(6.575,-6.575,-5.7)); +#118535 = DIRECTION('',(0.,0.,-1.)); +#118536 = DIRECTION('',(0.,-1.,0.)); +#118537 = ADVANCED_FACE('',(#118538),#118549,.T.); +#118538 = FACE_BOUND('',#118539,.T.); +#118539 = EDGE_LOOP('',(#118540,#118541,#118542,#118548)); +#118540 = ORIENTED_EDGE('',*,*,#118526,.T.); +#118541 = ORIENTED_EDGE('',*,*,#118457,.T.); +#118542 = ORIENTED_EDGE('',*,*,#118543,.F.); +#118543 = EDGE_CURVE('',#117863,#118450,#118544,.T.); +#118544 = LINE('',#118545,#118546); +#118545 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#118546 = VECTOR('',#118547,1.); +#118547 = DIRECTION('',(-1.,0.,0.)); +#118548 = ORIENTED_EDGE('',*,*,#117862,.F.); +#118549 = PLANE('',#118550); +#118550 = AXIS2_PLACEMENT_3D('',#118551,#118552,#118553); +#118551 = CARTESIAN_POINT('',(6.575,-5.975,-5.7)); +#118552 = DIRECTION('',(0.,-1.,0.)); +#118553 = DIRECTION('',(0.,0.,-1.)); +#118554 = ADVANCED_FACE('',(#118555),#118571,.T.); +#118555 = FACE_BOUND('',#118556,.T.); +#118556 = EDGE_LOOP('',(#118557,#118558,#118564,#118565)); +#118557 = ORIENTED_EDGE('',*,*,#118285,.T.); +#118558 = ORIENTED_EDGE('',*,*,#118559,.F.); +#118559 = EDGE_CURVE('',#118035,#118278,#118560,.T.); +#118560 = LINE('',#118561,#118562); +#118561 = CARTESIAN_POINT('',(6.575,5.975,-11.2)); +#118562 = VECTOR('',#118563,1.); +#118563 = DIRECTION('',(-1.,0.,0.)); +#118564 = ORIENTED_EDGE('',*,*,#118034,.F.); +#118565 = ORIENTED_EDGE('',*,*,#118566,.F.); +#118566 = EDGE_CURVE('',#118286,#118027,#118567,.T.); +#118567 = LINE('',#118568,#118569); +#118568 = CARTESIAN_POINT('',(6.075,5.5,-11.2)); +#118569 = VECTOR('',#118570,1.); +#118570 = DIRECTION('',(1.,0.,0.)); +#118571 = PLANE('',#118572); +#118572 = AXIS2_PLACEMENT_3D('',#118573,#118574,#118575); +#118573 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#118574 = DIRECTION('',(0.,0.,-1.)); +#118575 = DIRECTION('',(0.,-1.,0.)); +#118576 = ADVANCED_FACE('',(#118577),#118588,.T.); +#118577 = FACE_BOUND('',#118578,.T.); +#118578 = EDGE_LOOP('',(#118579,#118580,#118581,#118582)); +#118579 = ORIENTED_EDGE('',*,*,#117870,.F.); +#118580 = ORIENTED_EDGE('',*,*,#118543,.T.); +#118581 = ORIENTED_EDGE('',*,*,#118449,.T.); +#118582 = ORIENTED_EDGE('',*,*,#118583,.T.); +#118583 = EDGE_CURVE('',#118442,#117871,#118584,.T.); +#118584 = LINE('',#118585,#118586); +#118585 = CARTESIAN_POINT('',(6.075,-5.5,-11.2)); +#118586 = VECTOR('',#118587,1.); +#118587 = DIRECTION('',(1.,0.,0.)); +#118588 = PLANE('',#118589); +#118589 = AXIS2_PLACEMENT_3D('',#118590,#118591,#118592); +#118590 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#118591 = DIRECTION('',(0.,0.,-1.)); +#118592 = DIRECTION('',(0.,-1.,0.)); +#118593 = ADVANCED_FACE('',(#118594),#118610,.T.); +#118594 = FACE_BOUND('',#118595,.T.); +#118595 = EDGE_LOOP('',(#118596,#118597,#118603,#118604)); +#118596 = ORIENTED_EDGE('',*,*,#117968,.F.); +#118597 = ORIENTED_EDGE('',*,*,#118598,.F.); +#118598 = EDGE_CURVE('',#118352,#117961,#118599,.T.); +#118599 = LINE('',#118600,#118601); +#118600 = CARTESIAN_POINT('',(6.075,1.9,-11.2)); +#118601 = VECTOR('',#118602,1.); +#118602 = DIRECTION('',(1.,0.,0.)); +#118603 = ORIENTED_EDGE('',*,*,#118351,.T.); +#118604 = ORIENTED_EDGE('',*,*,#118605,.T.); +#118605 = EDGE_CURVE('',#118344,#117969,#118606,.T.); +#118606 = LINE('',#118607,#118608); +#118607 = CARTESIAN_POINT('',(6.075,3.3,-11.2)); +#118608 = VECTOR('',#118609,1.); +#118609 = DIRECTION('',(1.,0.,0.)); +#118610 = PLANE('',#118611); +#118611 = AXIS2_PLACEMENT_3D('',#118612,#118613,#118614); +#118612 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#118613 = DIRECTION('',(0.,0.,-1.)); +#118614 = DIRECTION('',(0.,-1.,0.)); +#118615 = ADVANCED_FACE('',(#118616),#118632,.T.); +#118616 = FACE_BOUND('',#118617,.T.); +#118617 = EDGE_LOOP('',(#118618,#118619,#118625,#118626)); +#118618 = ORIENTED_EDGE('',*,*,#118383,.T.); +#118619 = ORIENTED_EDGE('',*,*,#118620,.T.); +#118620 = EDGE_CURVE('',#118376,#117937,#118621,.T.); +#118621 = LINE('',#118622,#118623); +#118622 = CARTESIAN_POINT('',(6.075,-1.9,-11.2)); +#118623 = VECTOR('',#118624,1.); +#118624 = DIRECTION('',(1.,0.,0.)); +#118625 = ORIENTED_EDGE('',*,*,#117936,.F.); +#118626 = ORIENTED_EDGE('',*,*,#118627,.F.); +#118627 = EDGE_CURVE('',#118384,#117929,#118628,.T.); +#118628 = LINE('',#118629,#118630); +#118629 = CARTESIAN_POINT('',(6.075,-3.3,-11.2)); +#118630 = VECTOR('',#118631,1.); +#118631 = DIRECTION('',(1.,0.,0.)); +#118632 = PLANE('',#118633); +#118633 = AXIS2_PLACEMENT_3D('',#118634,#118635,#118636); +#118634 = CARTESIAN_POINT('',(6.575,-5.975,-11.2)); +#118635 = DIRECTION('',(0.,0.,-1.)); +#118636 = DIRECTION('',(0.,-1.,0.)); +#118637 = ADVANCED_FACE('',(#118638),#118649,.T.); +#118638 = FACE_BOUND('',#118639,.T.); +#118639 = EDGE_LOOP('',(#118640,#118641,#118647,#118648)); +#118640 = ORIENTED_EDGE('',*,*,#118026,.F.); +#118641 = ORIENTED_EDGE('',*,*,#118642,.T.); +#118642 = EDGE_CURVE('',#118018,#118294,#118643,.T.); +#118643 = LINE('',#118644,#118645); +#118644 = CARTESIAN_POINT('',(6.575,5.5,-13.00523257219)); +#118645 = VECTOR('',#118646,1.); +#118646 = DIRECTION('',(-1.,0.,0.)); +#118647 = ORIENTED_EDGE('',*,*,#118293,.T.); +#118648 = ORIENTED_EDGE('',*,*,#118566,.T.); +#118649 = PLANE('',#118650); +#118650 = AXIS2_PLACEMENT_3D('',#118651,#118652,#118653); +#118651 = CARTESIAN_POINT('',(6.575,5.5,-13.00523257219)); +#118652 = DIRECTION('',(-0.,1.,0.)); +#118653 = DIRECTION('',(1.,0.,0.)); +#118654 = ADVANCED_FACE('',(#118655),#118666,.T.); +#118655 = FACE_BOUND('',#118656,.T.); +#118656 = EDGE_LOOP('',(#118657,#118663,#118664,#118665)); +#118657 = ORIENTED_EDGE('',*,*,#118658,.T.); +#118658 = EDGE_CURVE('',#118010,#118302,#118659,.T.); +#118659 = LINE('',#118660,#118661); +#118660 = CARTESIAN_POINT('',(6.575,5.205232572195,-13.3)); +#118661 = VECTOR('',#118662,1.); +#118662 = DIRECTION('',(-1.,0.,0.)); +#118663 = ORIENTED_EDGE('',*,*,#118301,.T.); +#118664 = ORIENTED_EDGE('',*,*,#118642,.F.); +#118665 = ORIENTED_EDGE('',*,*,#118017,.F.); +#118666 = CYLINDRICAL_SURFACE('',#118667,0.294767427805); +#118667 = AXIS2_PLACEMENT_3D('',#118668,#118669,#118670); +#118668 = CARTESIAN_POINT('',(6.575,5.205232572195,-13.00523257219)); +#118669 = DIRECTION('',(1.,0.,0.)); +#118670 = DIRECTION('',(0.,0.,-1.)); +#118671 = ADVANCED_FACE('',(#118672),#118683,.T.); +#118672 = FACE_BOUND('',#118673,.T.); +#118673 = EDGE_LOOP('',(#118674,#118680,#118681,#118682)); +#118674 = ORIENTED_EDGE('',*,*,#118675,.T.); +#118675 = EDGE_CURVE('',#118001,#118311,#118676,.T.); +#118676 = LINE('',#118677,#118678); +#118677 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.3)); +#118678 = VECTOR('',#118679,1.); +#118679 = DIRECTION('',(-1.,0.,0.)); +#118680 = ORIENTED_EDGE('',*,*,#118310,.T.); +#118681 = ORIENTED_EDGE('',*,*,#118658,.F.); +#118682 = ORIENTED_EDGE('',*,*,#118009,.F.); +#118683 = PLANE('',#118684); +#118684 = AXIS2_PLACEMENT_3D('',#118685,#118686,#118687); +#118685 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.3)); +#118686 = DIRECTION('',(0.,0.,-1.)); +#118687 = DIRECTION('',(0.,-1.,0.)); +#118688 = ADVANCED_FACE('',(#118689),#118700,.T.); +#118689 = FACE_BOUND('',#118690,.T.); +#118690 = EDGE_LOOP('',(#118691,#118697,#118698,#118699)); +#118691 = ORIENTED_EDGE('',*,*,#118692,.T.); +#118692 = EDGE_CURVE('',#117993,#118319,#118693,.T.); +#118693 = LINE('',#118694,#118695); +#118694 = CARTESIAN_POINT('',(6.575,4.5,-13.00523257219)); +#118695 = VECTOR('',#118696,1.); +#118696 = DIRECTION('',(-1.,0.,0.)); +#118697 = ORIENTED_EDGE('',*,*,#118318,.T.); +#118698 = ORIENTED_EDGE('',*,*,#118675,.F.); +#118699 = ORIENTED_EDGE('',*,*,#118000,.F.); +#118700 = CYLINDRICAL_SURFACE('',#118701,0.294767427805); +#118701 = AXIS2_PLACEMENT_3D('',#118702,#118703,#118704); +#118702 = CARTESIAN_POINT('',(6.575,4.794767427805,-13.00523257219)); +#118703 = DIRECTION('',(1.,0.,0.)); +#118704 = DIRECTION('',(0.,0.,-1.)); +#118705 = ADVANCED_FACE('',(#118706),#118717,.T.); +#118706 = FACE_BOUND('',#118707,.T.); +#118707 = EDGE_LOOP('',(#118708,#118709,#118710,#118716)); +#118708 = ORIENTED_EDGE('',*,*,#118692,.F.); +#118709 = ORIENTED_EDGE('',*,*,#117992,.F.); +#118710 = ORIENTED_EDGE('',*,*,#118711,.T.); +#118711 = EDGE_CURVE('',#117985,#118328,#118712,.T.); +#118712 = LINE('',#118713,#118714); +#118713 = CARTESIAN_POINT('',(6.575,4.5,-9.6)); +#118714 = VECTOR('',#118715,1.); +#118715 = DIRECTION('',(-1.,0.,0.)); +#118716 = ORIENTED_EDGE('',*,*,#118327,.F.); +#118717 = PLANE('',#118718); +#118718 = AXIS2_PLACEMENT_3D('',#118719,#118720,#118721); +#118719 = CARTESIAN_POINT('',(6.575,4.5,-11.2)); +#118720 = DIRECTION('',(0.,-1.,0.)); +#118721 = DIRECTION('',(0.,0.,-1.)); +#118722 = ADVANCED_FACE('',(#118723),#118734,.F.); +#118723 = FACE_BOUND('',#118724,.T.); +#118724 = EDGE_LOOP('',(#118725,#118731,#118732,#118733)); +#118725 = ORIENTED_EDGE('',*,*,#118726,.T.); +#118726 = EDGE_CURVE('',#117977,#118336,#118727,.T.); +#118727 = LINE('',#118728,#118729); +#118728 = CARTESIAN_POINT('',(6.575,3.3,-9.6)); +#118729 = VECTOR('',#118730,1.); +#118730 = DIRECTION('',(-1.,0.,0.)); +#118731 = ORIENTED_EDGE('',*,*,#118335,.F.); +#118732 = ORIENTED_EDGE('',*,*,#118711,.F.); +#118733 = ORIENTED_EDGE('',*,*,#117984,.T.); +#118734 = PLANE('',#118735); +#118735 = AXIS2_PLACEMENT_3D('',#118736,#118737,#118738); +#118736 = CARTESIAN_POINT('',(6.575,4.5,-9.6)); +#118737 = DIRECTION('',(0.,0.,1.)); +#118738 = DIRECTION('',(1.,0.,-0.)); +#118739 = ADVANCED_FACE('',(#118740),#118746,.F.); +#118740 = FACE_BOUND('',#118741,.T.); +#118741 = EDGE_LOOP('',(#118742,#118743,#118744,#118745)); +#118742 = ORIENTED_EDGE('',*,*,#118605,.F.); +#118743 = ORIENTED_EDGE('',*,*,#118343,.F.); +#118744 = ORIENTED_EDGE('',*,*,#118726,.F.); +#118745 = ORIENTED_EDGE('',*,*,#117976,.T.); +#118746 = PLANE('',#118747); +#118747 = AXIS2_PLACEMENT_3D('',#118748,#118749,#118750); +#118748 = CARTESIAN_POINT('',(6.575,3.3,-9.6)); +#118749 = DIRECTION('',(0.,-1.,0.)); +#118750 = DIRECTION('',(0.,0.,-1.)); +#118751 = ADVANCED_FACE('',(#118752),#118763,.T.); +#118752 = FACE_BOUND('',#118753,.T.); +#118753 = EDGE_LOOP('',(#118754,#118755,#118756,#118762)); +#118754 = ORIENTED_EDGE('',*,*,#118559,.T.); +#118755 = ORIENTED_EDGE('',*,*,#118277,.T.); +#118756 = ORIENTED_EDGE('',*,*,#118757,.F.); +#118757 = EDGE_CURVE('',#118043,#118270,#118758,.T.); +#118758 = LINE('',#118759,#118760); +#118759 = CARTESIAN_POINT('',(6.575,5.975,-5.7)); +#118760 = VECTOR('',#118761,1.); +#118761 = DIRECTION('',(-1.,0.,0.)); +#118762 = ORIENTED_EDGE('',*,*,#118042,.F.); +#118763 = PLANE('',#118764); +#118764 = AXIS2_PLACEMENT_3D('',#118765,#118766,#118767); +#118765 = CARTESIAN_POINT('',(6.575,5.975,-11.2)); +#118766 = DIRECTION('',(-0.,1.,0.)); +#118767 = DIRECTION('',(1.,0.,0.)); +#118768 = ADVANCED_FACE('',(#118769),#118780,.T.); +#118769 = FACE_BOUND('',#118770,.T.); +#118770 = EDGE_LOOP('',(#118771,#118772,#118773,#118779)); +#118771 = ORIENTED_EDGE('',*,*,#118757,.T.); +#118772 = ORIENTED_EDGE('',*,*,#118269,.T.); +#118773 = ORIENTED_EDGE('',*,*,#118774,.F.); +#118774 = EDGE_CURVE('',#118051,#118262,#118775,.T.); +#118775 = LINE('',#118776,#118777); +#118776 = CARTESIAN_POINT('',(6.575,6.575,-5.7)); +#118777 = VECTOR('',#118778,1.); +#118778 = DIRECTION('',(-1.,0.,0.)); +#118779 = ORIENTED_EDGE('',*,*,#118050,.F.); +#118780 = PLANE('',#118781); +#118781 = AXIS2_PLACEMENT_3D('',#118782,#118783,#118784); +#118782 = CARTESIAN_POINT('',(6.575,5.975,-5.7)); +#118783 = DIRECTION('',(0.,0.,-1.)); +#118784 = DIRECTION('',(0.,-1.,0.)); +#118785 = ADVANCED_FACE('',(#118786),#118797,.T.); +#118786 = FACE_BOUND('',#118787,.T.); +#118787 = EDGE_LOOP('',(#118788,#118789,#118790,#118796)); +#118788 = ORIENTED_EDGE('',*,*,#118774,.T.); +#118789 = ORIENTED_EDGE('',*,*,#118261,.T.); +#118790 = ORIENTED_EDGE('',*,*,#118791,.F.); +#118791 = EDGE_CURVE('',#118059,#118254,#118792,.T.); +#118792 = LINE('',#118793,#118794); +#118793 = CARTESIAN_POINT('',(6.575,6.575,-1.2)); +#118794 = VECTOR('',#118795,1.); +#118795 = DIRECTION('',(-1.,0.,0.)); +#118796 = ORIENTED_EDGE('',*,*,#118058,.F.); +#118797 = PLANE('',#118798); +#118798 = AXIS2_PLACEMENT_3D('',#118799,#118800,#118801); +#118799 = CARTESIAN_POINT('',(6.575,6.575,-5.7)); +#118800 = DIRECTION('',(-0.,1.,0.)); +#118801 = DIRECTION('',(1.,0.,0.)); +#118802 = ADVANCED_FACE('',(#118803),#118814,.T.); +#118803 = FACE_BOUND('',#118804,.T.); +#118804 = EDGE_LOOP('',(#118805,#118806,#118807,#118808)); +#118805 = ORIENTED_EDGE('',*,*,#118066,.F.); +#118806 = ORIENTED_EDGE('',*,*,#118791,.T.); +#118807 = ORIENTED_EDGE('',*,*,#118253,.T.); +#118808 = ORIENTED_EDGE('',*,*,#118809,.T.); +#118809 = EDGE_CURVE('',#118245,#118067,#118810,.T.); +#118810 = LINE('',#118811,#118812); +#118811 = CARTESIAN_POINT('',(6.075,5.707414107351,-0.419172696616)); +#118812 = VECTOR('',#118813,1.); +#118813 = DIRECTION('',(1.,0.,0.)); +#118814 = PLANE('',#118815); +#118815 = AXIS2_PLACEMENT_3D('',#118816,#118817,#118818); +#118816 = CARTESIAN_POINT('',(6.575,6.575,-1.2)); +#118817 = DIRECTION('',(-0.,0.668964731622,0.743294146247)); +#118818 = DIRECTION('',(1.,0.,0.)); +#118819 = ADVANCED_FACE('',(#118820),#118831,.F.); +#118820 = FACE_BOUND('',#118821,.F.); +#118821 = EDGE_LOOP('',(#118822,#118828,#118829,#118830)); +#118822 = ORIENTED_EDGE('',*,*,#118823,.F.); +#118823 = EDGE_CURVE('',#118237,#118075,#118824,.T.); +#118824 = LINE('',#118825,#118826); +#118825 = CARTESIAN_POINT('',(6.075,5.575,-0.121855038117)); +#118826 = VECTOR('',#118827,1.); +#118827 = DIRECTION('',(1.,0.,0.)); +#118828 = ORIENTED_EDGE('',*,*,#118244,.T.); +#118829 = ORIENTED_EDGE('',*,*,#118809,.T.); +#118830 = ORIENTED_EDGE('',*,*,#118074,.T.); +#118831 = CYLINDRICAL_SURFACE('',#118832,0.4); +#118832 = AXIS2_PLACEMENT_3D('',#118833,#118834,#118835); +#118833 = CARTESIAN_POINT('',(-23.740376,5.975,-0.121855038117)); +#118834 = DIRECTION('',(1.,0.,0.)); +#118835 = DIRECTION('',(0.,-1.,0.)); +#118836 = ADVANCED_FACE('',(#118837),#118843,.T.); +#118837 = FACE_BOUND('',#118838,.T.); +#118838 = EDGE_LOOP('',(#118839,#118840,#118841,#118842)); +#118839 = ORIENTED_EDGE('',*,*,#118236,.T.); +#118840 = ORIENTED_EDGE('',*,*,#104971,.F.); +#118841 = ORIENTED_EDGE('',*,*,#118083,.F.); +#118842 = ORIENTED_EDGE('',*,*,#118823,.F.); +#118843 = PLANE('',#118844); +#118844 = AXIS2_PLACEMENT_3D('',#118845,#118846,#118847); +#118845 = CARTESIAN_POINT('',(6.575,5.575,-0.3)); +#118846 = DIRECTION('',(-0.,1.,0.)); +#118847 = DIRECTION('',(1.,0.,0.)); +#118848 = ADVANCED_FACE('',(#118849),#118860,.T.); +#118849 = FACE_BOUND('',#118850,.T.); +#118850 = EDGE_LOOP('',(#118851,#118852,#118858,#118859)); +#118851 = ORIENTED_EDGE('',*,*,#118441,.T.); +#118852 = ORIENTED_EDGE('',*,*,#118853,.F.); +#118853 = EDGE_CURVE('',#117879,#118433,#118854,.T.); +#118854 = LINE('',#118855,#118856); +#118855 = CARTESIAN_POINT('',(6.575,-5.5,-13.00523257219)); +#118856 = VECTOR('',#118857,1.); +#118857 = DIRECTION('',(-1.,0.,0.)); +#118858 = ORIENTED_EDGE('',*,*,#117878,.F.); +#118859 = ORIENTED_EDGE('',*,*,#118583,.F.); +#118860 = PLANE('',#118861); +#118861 = AXIS2_PLACEMENT_3D('',#118862,#118863,#118864); +#118862 = CARTESIAN_POINT('',(6.575,-5.5,-11.2)); +#118863 = DIRECTION('',(0.,-1.,0.)); +#118864 = DIRECTION('',(0.,0.,-1.)); +#118865 = ADVANCED_FACE('',(#118866),#118877,.T.); +#118866 = FACE_BOUND('',#118867,.T.); +#118867 = EDGE_LOOP('',(#118868,#118869,#118870,#118876)); +#118868 = ORIENTED_EDGE('',*,*,#118853,.T.); +#118869 = ORIENTED_EDGE('',*,*,#118432,.T.); +#118870 = ORIENTED_EDGE('',*,*,#118871,.F.); +#118871 = EDGE_CURVE('',#117887,#118425,#118872,.T.); +#118872 = LINE('',#118873,#118874); +#118873 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.3)); +#118874 = VECTOR('',#118875,1.); +#118875 = DIRECTION('',(-1.,0.,0.)); +#118876 = ORIENTED_EDGE('',*,*,#117886,.F.); +#118877 = CYLINDRICAL_SURFACE('',#118878,0.294767427805); +#118878 = AXIS2_PLACEMENT_3D('',#118879,#118880,#118881); +#118879 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.00523257219)); +#118880 = DIRECTION('',(1.,0.,0.)); +#118881 = DIRECTION('',(0.,0.,-1.)); +#118882 = ADVANCED_FACE('',(#118883),#118894,.T.); +#118883 = FACE_BOUND('',#118884,.T.); +#118884 = EDGE_LOOP('',(#118885,#118886,#118887,#118893)); +#118885 = ORIENTED_EDGE('',*,*,#118871,.T.); +#118886 = ORIENTED_EDGE('',*,*,#118424,.T.); +#118887 = ORIENTED_EDGE('',*,*,#118888,.F.); +#118888 = EDGE_CURVE('',#117896,#118416,#118889,.T.); +#118889 = LINE('',#118890,#118891); +#118890 = CARTESIAN_POINT('',(6.575,-4.794767427805,-13.3)); +#118891 = VECTOR('',#118892,1.); +#118892 = DIRECTION('',(-1.,0.,0.)); +#118893 = ORIENTED_EDGE('',*,*,#117895,.F.); +#118894 = PLANE('',#118895); +#118895 = AXIS2_PLACEMENT_3D('',#118896,#118897,#118898); +#118896 = CARTESIAN_POINT('',(6.575,-5.205232572195,-13.3)); +#118897 = DIRECTION('',(0.,0.,-1.)); +#118898 = DIRECTION('',(0.,-1.,0.)); +#118899 = ADVANCED_FACE('',(#118900),#118911,.T.); +#118900 = FACE_BOUND('',#118901,.T.); +#118901 = EDGE_LOOP('',(#118902,#118903,#118904,#118910)); +#118902 = ORIENTED_EDGE('',*,*,#118888,.T.); +#118903 = ORIENTED_EDGE('',*,*,#118415,.T.); +#118904 = ORIENTED_EDGE('',*,*,#118905,.F.); +#118905 = EDGE_CURVE('',#117904,#118408,#118906,.T.); +#118906 = LINE('',#118907,#118908); +#118907 = CARTESIAN_POINT('',(6.575,-4.5,-13.00523257219)); +#118908 = VECTOR('',#118909,1.); +#118909 = DIRECTION('',(-1.,0.,0.)); +#118910 = ORIENTED_EDGE('',*,*,#117903,.F.); +#118911 = CYLINDRICAL_SURFACE('',#118912,0.294767427805); +#118912 = AXIS2_PLACEMENT_3D('',#118913,#118914,#118915); +#118913 = CARTESIAN_POINT('',(6.575,-4.794767427805,-13.00523257219)); +#118914 = DIRECTION('',(1.,0.,0.)); +#118915 = DIRECTION('',(0.,0.,-1.)); +#118916 = ADVANCED_FACE('',(#118917),#118928,.T.); +#118917 = FACE_BOUND('',#118918,.T.); +#118918 = EDGE_LOOP('',(#118919,#118920,#118921,#118927)); +#118919 = ORIENTED_EDGE('',*,*,#118905,.T.); +#118920 = ORIENTED_EDGE('',*,*,#118407,.F.); +#118921 = ORIENTED_EDGE('',*,*,#118922,.F.); +#118922 = EDGE_CURVE('',#117913,#118400,#118923,.T.); +#118923 = LINE('',#118924,#118925); +#118924 = CARTESIAN_POINT('',(6.575,-4.5,-9.6)); +#118925 = VECTOR('',#118926,1.); +#118926 = DIRECTION('',(-1.,0.,0.)); +#118927 = ORIENTED_EDGE('',*,*,#117912,.F.); +#118928 = PLANE('',#118929); +#118929 = AXIS2_PLACEMENT_3D('',#118930,#118931,#118932); +#118930 = CARTESIAN_POINT('',(6.575,-4.5,-13.00523257219)); +#118931 = DIRECTION('',(-0.,1.,0.)); +#118932 = DIRECTION('',(1.,0.,0.)); +#118933 = ADVANCED_FACE('',(#118934),#118945,.F.); +#118934 = FACE_BOUND('',#118935,.T.); +#118935 = EDGE_LOOP('',(#118936,#118937,#118938,#118944)); +#118936 = ORIENTED_EDGE('',*,*,#118922,.T.); +#118937 = ORIENTED_EDGE('',*,*,#118399,.F.); +#118938 = ORIENTED_EDGE('',*,*,#118939,.F.); +#118939 = EDGE_CURVE('',#117921,#118392,#118940,.T.); +#118940 = LINE('',#118941,#118942); +#118941 = CARTESIAN_POINT('',(6.575,-3.3,-9.6)); +#118942 = VECTOR('',#118943,1.); +#118943 = DIRECTION('',(-1.,0.,0.)); +#118944 = ORIENTED_EDGE('',*,*,#117920,.T.); +#118945 = PLANE('',#118946); +#118946 = AXIS2_PLACEMENT_3D('',#118947,#118948,#118949); +#118947 = CARTESIAN_POINT('',(6.575,-3.3,-9.6)); +#118948 = DIRECTION('',(0.,0.,1.)); +#118949 = DIRECTION('',(1.,0.,-0.)); +#118950 = ADVANCED_FACE('',(#118951),#118957,.F.); +#118951 = FACE_BOUND('',#118952,.T.); +#118952 = EDGE_LOOP('',(#118953,#118954,#118955,#118956)); +#118953 = ORIENTED_EDGE('',*,*,#118939,.T.); +#118954 = ORIENTED_EDGE('',*,*,#118391,.F.); +#118955 = ORIENTED_EDGE('',*,*,#118627,.T.); +#118956 = ORIENTED_EDGE('',*,*,#117928,.T.); +#118957 = PLANE('',#118958); +#118958 = AXIS2_PLACEMENT_3D('',#118959,#118960,#118961); +#118959 = CARTESIAN_POINT('',(6.575,-3.3,-11.2)); +#118960 = DIRECTION('',(-0.,1.,0.)); +#118961 = DIRECTION('',(1.,0.,0.)); +#118962 = ADVANCED_FACE('',(#118963),#118974,.F.); +#118963 = FACE_BOUND('',#118964,.T.); +#118964 = EDGE_LOOP('',(#118965,#118971,#118972,#118973)); +#118965 = ORIENTED_EDGE('',*,*,#118966,.T.); +#118966 = EDGE_CURVE('',#117953,#118360,#118967,.T.); +#118967 = LINE('',#118968,#118969); +#118968 = CARTESIAN_POINT('',(6.575,1.9,-8.2)); +#118969 = VECTOR('',#118970,1.); +#118970 = DIRECTION('',(-1.,0.,0.)); +#118971 = ORIENTED_EDGE('',*,*,#118359,.F.); +#118972 = ORIENTED_EDGE('',*,*,#118598,.T.); +#118973 = ORIENTED_EDGE('',*,*,#117960,.T.); +#118974 = PLANE('',#118975); +#118975 = AXIS2_PLACEMENT_3D('',#118976,#118977,#118978); +#118976 = CARTESIAN_POINT('',(6.575,1.9,-14.2)); +#118977 = DIRECTION('',(-0.,1.,0.)); +#118978 = DIRECTION('',(1.,0.,0.)); +#118979 = ADVANCED_FACE('',(#118980),#118991,.F.); +#118980 = FACE_BOUND('',#118981,.T.); +#118981 = EDGE_LOOP('',(#118982,#118988,#118989,#118990)); +#118982 = ORIENTED_EDGE('',*,*,#118983,.T.); +#118983 = EDGE_CURVE('',#117945,#118368,#118984,.T.); +#118984 = LINE('',#118985,#118986); +#118985 = CARTESIAN_POINT('',(6.575,-1.9,-8.2)); +#118986 = VECTOR('',#118987,1.); +#118987 = DIRECTION('',(-1.,0.,0.)); +#118988 = ORIENTED_EDGE('',*,*,#118367,.F.); +#118989 = ORIENTED_EDGE('',*,*,#118966,.F.); +#118990 = ORIENTED_EDGE('',*,*,#117952,.T.); +#118991 = PLANE('',#118992); +#118992 = AXIS2_PLACEMENT_3D('',#118993,#118994,#118995); +#118993 = CARTESIAN_POINT('',(6.575,1.9,-8.2)); +#118994 = DIRECTION('',(0.,0.,1.)); +#118995 = DIRECTION('',(1.,0.,-0.)); +#118996 = ADVANCED_FACE('',(#118997),#119003,.F.); +#118997 = FACE_BOUND('',#118998,.T.); +#118998 = EDGE_LOOP('',(#118999,#119000,#119001,#119002)); +#118999 = ORIENTED_EDGE('',*,*,#118620,.F.); +#119000 = ORIENTED_EDGE('',*,*,#118375,.T.); +#119001 = ORIENTED_EDGE('',*,*,#118983,.F.); +#119002 = ORIENTED_EDGE('',*,*,#117944,.F.); +#119003 = PLANE('',#119004); +#119004 = AXIS2_PLACEMENT_3D('',#119005,#119006,#119007); +#119005 = CARTESIAN_POINT('',(6.575,-1.9,-8.2)); +#119006 = DIRECTION('',(0.,-1.,0.)); +#119007 = DIRECTION('',(0.,0.,-1.)); +#119008 = ADVANCED_FACE('',(#119009),#119027,.F.); +#119009 = FACE_BOUND('',#119010,.T.); +#119010 = EDGE_LOOP('',(#119011,#119012,#119013,#119019,#119020,#119021) + ); +#119011 = ORIENTED_EDGE('',*,*,#104987,.F.); +#119012 = ORIENTED_EDGE('',*,*,#118229,.F.); +#119013 = ORIENTED_EDGE('',*,*,#119014,.T.); +#119014 = EDGE_CURVE('',#118221,#117574,#119015,.T.); +#119015 = LINE('',#119016,#119017); +#119016 = CARTESIAN_POINT('',(6.075,4.3,5.E-02)); +#119017 = VECTOR('',#119018,1.); +#119018 = DIRECTION('',(1.,0.,0.)); +#119019 = ORIENTED_EDGE('',*,*,#117573,.F.); +#119020 = ORIENTED_EDGE('',*,*,#105762,.T.); +#119021 = ORIENTED_EDGE('',*,*,#119022,.T.); +#119022 = EDGE_CURVE('',#105754,#104988,#119023,.T.); +#119023 = LINE('',#119024,#119025); +#119024 = CARTESIAN_POINT('',(5.925,4.3,0.5)); +#119025 = VECTOR('',#119026,1.); +#119026 = DIRECTION('',(0.,0.,-1.)); +#119027 = PLANE('',#119028); +#119028 = AXIS2_PLACEMENT_3D('',#119029,#119030,#119031); +#119029 = CARTESIAN_POINT('',(6.575,4.3,0.5)); +#119030 = DIRECTION('',(-0.,1.,0.)); +#119031 = DIRECTION('',(1.,0.,0.)); +#119032 = ADVANCED_FACE('',(#119033),#119044,.F.); +#119033 = FACE_BOUND('',#119034,.F.); +#119034 = EDGE_LOOP('',(#119035,#119041,#119042,#119043)); +#119035 = ORIENTED_EDGE('',*,*,#119036,.F.); +#119036 = EDGE_CURVE('',#105746,#104996,#119037,.T.); +#119037 = LINE('',#119038,#119039); +#119038 = CARTESIAN_POINT('',(5.775,4.15,0.5)); +#119039 = VECTOR('',#119040,1.); +#119040 = DIRECTION('',(0.,0.,-1.)); +#119041 = ORIENTED_EDGE('',*,*,#105753,.T.); +#119042 = ORIENTED_EDGE('',*,*,#119022,.T.); +#119043 = ORIENTED_EDGE('',*,*,#104995,.T.); +#119044 = CYLINDRICAL_SURFACE('',#119045,0.15); +#119045 = AXIS2_PLACEMENT_3D('',#119046,#119047,#119048); +#119046 = CARTESIAN_POINT('',(5.925,4.15,18.48968)); +#119047 = DIRECTION('',(0.,0.,-1.)); +#119048 = DIRECTION('',(-1.,0.,0.)); +#119049 = ADVANCED_FACE('',(#119050),#119061,.F.); +#119050 = FACE_BOUND('',#119051,.T.); +#119051 = EDGE_LOOP('',(#119052,#119053,#119054,#119055)); +#119052 = ORIENTED_EDGE('',*,*,#105004,.F.); +#119053 = ORIENTED_EDGE('',*,*,#119036,.F.); +#119054 = ORIENTED_EDGE('',*,*,#105745,.T.); +#119055 = ORIENTED_EDGE('',*,*,#119056,.T.); +#119056 = EDGE_CURVE('',#105737,#105005,#119057,.T.); +#119057 = LINE('',#119058,#119059); +#119058 = CARTESIAN_POINT('',(5.775,2.95,0.5)); +#119059 = VECTOR('',#119060,1.); +#119060 = DIRECTION('',(0.,0.,-1.)); +#119061 = PLANE('',#119062); +#119062 = AXIS2_PLACEMENT_3D('',#119063,#119064,#119065); +#119063 = CARTESIAN_POINT('',(5.775,4.3,0.5)); +#119064 = DIRECTION('',(-1.,0.,0.)); +#119065 = DIRECTION('',(0.,0.,1.)); +#119066 = ADVANCED_FACE('',(#119067),#119078,.F.); +#119067 = FACE_BOUND('',#119068,.F.); +#119068 = EDGE_LOOP('',(#119069,#119075,#119076,#119077)); +#119069 = ORIENTED_EDGE('',*,*,#119070,.F.); +#119070 = EDGE_CURVE('',#105729,#105013,#119071,.T.); +#119071 = LINE('',#119072,#119073); +#119072 = CARTESIAN_POINT('',(5.925,2.8,0.5)); +#119073 = VECTOR('',#119074,1.); +#119074 = DIRECTION('',(0.,0.,-1.)); +#119075 = ORIENTED_EDGE('',*,*,#105736,.T.); +#119076 = ORIENTED_EDGE('',*,*,#119056,.T.); +#119077 = ORIENTED_EDGE('',*,*,#105012,.T.); +#119078 = CYLINDRICAL_SURFACE('',#119079,0.15); +#119079 = AXIS2_PLACEMENT_3D('',#119080,#119081,#119082); +#119080 = CARTESIAN_POINT('',(5.925,2.95,18.48968)); +#119081 = DIRECTION('',(0.,0.,-1.)); +#119082 = DIRECTION('',(0.,-1.,0.)); +#119083 = ADVANCED_FACE('',(#119084),#119097,.F.); +#119084 = FACE_BOUND('',#119085,.T.); +#119085 = EDGE_LOOP('',(#119086,#119087,#119088,#119094,#119095,#119096) + ); +#119086 = ORIENTED_EDGE('',*,*,#105728,.F.); +#119087 = ORIENTED_EDGE('',*,*,#117530,.T.); +#119088 = ORIENTED_EDGE('',*,*,#119089,.T.); +#119089 = EDGE_CURVE('',#117521,#118205,#119090,.T.); +#119090 = LINE('',#119091,#119092); +#119091 = CARTESIAN_POINT('',(6.572493718553,2.8,5.E-02)); +#119092 = VECTOR('',#119093,1.); +#119093 = DIRECTION('',(-1.,0.,0.)); +#119094 = ORIENTED_EDGE('',*,*,#118204,.T.); +#119095 = ORIENTED_EDGE('',*,*,#105021,.T.); +#119096 = ORIENTED_EDGE('',*,*,#119070,.F.); +#119097 = PLANE('',#119098); +#119098 = AXIS2_PLACEMENT_3D('',#119099,#119100,#119101); +#119099 = CARTESIAN_POINT('',(5.775,2.8,0.5)); +#119100 = DIRECTION('',(0.,-1.,0.)); +#119101 = DIRECTION('',(0.,0.,-1.)); +#119102 = ADVANCED_FACE('',(#119103),#119110,.F.); +#119103 = FACE_BOUND('',#119104,.F.); +#119104 = EDGE_LOOP('',(#119105,#119106,#119107,#119108,#119109)); +#119105 = ORIENTED_EDGE('',*,*,#117805,.F.); +#119106 = ORIENTED_EDGE('',*,*,#118098,.T.); +#119107 = ORIENTED_EDGE('',*,*,#117518,.T.); +#119108 = ORIENTED_EDGE('',*,*,#119089,.T.); +#119109 = ORIENTED_EDGE('',*,*,#118212,.T.); +#119110 = CYLINDRICAL_SURFACE('',#119111,0.15); +#119111 = AXIS2_PLACEMENT_3D('',#119112,#119113,#119114); +#119112 = CARTESIAN_POINT('',(23.71734,2.95,5.E-02)); +#119113 = DIRECTION('',(-1.,0.,0.)); +#119114 = DIRECTION('',(0.,0.,-1.)); +#119115 = ADVANCED_FACE('',(#119116),#119123,.F.); +#119116 = FACE_BOUND('',#119117,.F.); +#119117 = EDGE_LOOP('',(#119118,#119119,#119120,#119121,#119122)); +#119118 = ORIENTED_EDGE('',*,*,#117789,.F.); +#119119 = ORIENTED_EDGE('',*,*,#118220,.T.); +#119120 = ORIENTED_EDGE('',*,*,#119014,.T.); +#119121 = ORIENTED_EDGE('',*,*,#117582,.T.); +#119122 = ORIENTED_EDGE('',*,*,#118090,.T.); +#119123 = CYLINDRICAL_SURFACE('',#119124,0.15); +#119124 = AXIS2_PLACEMENT_3D('',#119125,#119126,#119127); +#119125 = CARTESIAN_POINT('',(-23.71734,4.15,5.E-02)); +#119126 = DIRECTION('',(1.,0.,0.)); +#119127 = DIRECTION('',(0.,0.,-1.)); +#119128 = ADVANCED_FACE('',(#119129),#119153,.F.); +#119129 = FACE_BOUND('',#119130,.F.); +#119130 = EDGE_LOOP('',(#119131,#119150,#119151,#119152)); +#119131 = ORIENTED_EDGE('',*,*,#119132,.F.); +#119132 = EDGE_CURVE('',#105654,#105096,#119133,.T.); +#119133 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119134,#119135,#119136, + #119137,#119138,#119139,#119140,#119141,#119142,#119143,#119144, + #119145,#119146,#119147,#119148,#119149),.UNSPECIFIED.,.F.,.F.,(4,2, + 2,2,2,2,2,4),(0.,0.125,0.25,0.5,0.625,0.6875,0.75,1.), + .UNSPECIFIED.); +#119134 = CARTESIAN_POINT('',(5.708974596216,-6.075,0.5)); +#119135 = CARTESIAN_POINT('',(5.691921342191,-6.104537102404,0.5)); +#119136 = CARTESIAN_POINT('',(5.676903923803,-6.134036865114, + 0.497378940598)); +#119137 = CARTESIAN_POINT('',(5.650536051936,-6.192388634331, + 0.486894702988)); +#119138 = CARTESIAN_POINT('',(5.639703101484,-6.219735111765, + 0.479589422505)); +#119139 = CARTESIAN_POINT('',(5.608928652684,-6.309143142577, + 0.446463016502)); +#119140 = CARTESIAN_POINT('',(5.59605602525,-6.36519616031, + 0.412158015338)); +#119141 = CARTESIAN_POINT('',(5.584280390109,-6.436935182649, + 0.346566692947)); +#119142 = CARTESIAN_POINT('',(5.58162507119,-6.458491696983, + 0.322673168577)); +#119143 = CARTESIAN_POINT('',(5.57882212303,-6.487127245971, + 0.283788256665)); +#119144 = CARTESIAN_POINT('',(5.57808607043,-6.496057161639, + 0.270319181801)); +#119145 = CARTESIAN_POINT('',(5.576909569836,-6.512671451859, + 0.242366156953)); +#119146 = CARTESIAN_POINT('',(5.57650562958,-6.519589348722, + 0.229510562484)); +#119147 = CARTESIAN_POINT('',(5.57464200298,-6.558707474895, + 0.146411847194)); +#119148 = CARTESIAN_POINT('',(5.575,-6.574593325019,7.54482407188E-02)); +#119149 = CARTESIAN_POINT('',(5.575,-6.575,0.)); +#119150 = ORIENTED_EDGE('',*,*,#105661,.T.); +#119151 = ORIENTED_EDGE('',*,*,#117472,.F.); +#119152 = ORIENTED_EDGE('',*,*,#105095,.F.); +#119153 = CYLINDRICAL_SURFACE('',#119154,1.); +#119154 = AXIS2_PLACEMENT_3D('',#119155,#119156,#119157); +#119155 = CARTESIAN_POINT('',(6.575,-6.575,0.)); +#119156 = DIRECTION('',(0.,0.,1.)); +#119157 = DIRECTION('',(1.,0.,-0.)); +#119158 = ADVANCED_FACE('',(#119159),#119210,.T.); +#119159 = FACE_BOUND('',#119160,.T.); +#119160 = EDGE_LOOP('',(#119161,#119162,#119185,#119193,#119203)); +#119161 = ORIENTED_EDGE('',*,*,#105553,.F.); +#119162 = ORIENTED_EDGE('',*,*,#119163,.F.); +#119163 = EDGE_CURVE('',#105221,#105545,#119164,.T.); +#119164 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119165,#119166,#119167, + #119168,#119169,#119170,#119171,#119172,#119173,#119174,#119175, + #119176,#119177,#119178,#119179,#119180,#119181,#119182,#119183, + #119184),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,2,2,2,2,4),(0.,6.25E-02, + 0.125,0.25,0.3125,0.375,0.5,0.75,0.875,1.),.UNSPECIFIED.); +#119165 = CARTESIAN_POINT('',(-5.575,-6.575,0.)); +#119166 = CARTESIAN_POINT('',(-5.575,-6.575,2.005655760648E-02)); +#119167 = CARTESIAN_POINT('',(-5.574998524199,-6.574011961873, + 3.704305368783E-02)); +#119168 = CARTESIAN_POINT('',(-5.575010296145,-6.570048231802, + 7.341176953629E-02)); +#119169 = CARTESIAN_POINT('',(-5.575023544206,-6.567074439239, + 9.137274041093E-02)); +#119170 = CARTESIAN_POINT('',(-5.575165011669,-6.55517822576, + 0.144585491886)); +#119171 = CARTESIAN_POINT('',(-5.575377326742,-6.543278389827, + 0.179167111338)); +#119172 = CARTESIAN_POINT('',(-5.576509495217,-6.519505412706, + 0.229699218218)); +#119173 = CARTESIAN_POINT('',(-5.576907628329,-6.51270330616, + 0.242314954701)); +#119174 = CARTESIAN_POINT('',(-5.578082705461,-6.496100264251, + 0.270256611855)); +#119175 = CARTESIAN_POINT('',(-5.578818013324,-6.487174048961, + 0.283722767398)); +#119176 = CARTESIAN_POINT('',(-5.581619027323,-6.45854384457, + 0.322607214919)); +#119177 = CARTESIAN_POINT('',(-5.584273415526,-6.436983197951, + 0.346511487793)); +#119178 = CARTESIAN_POINT('',(-5.596052052968,-6.365209322589, + 0.412168229996)); +#119179 = CARTESIAN_POINT('',(-5.608905691265,-6.309214018176, + 0.446422718076)); +#119180 = CARTESIAN_POINT('',(-5.639704091254,-6.219730154026, + 0.479598215254)); +#119181 = CARTESIAN_POINT('',(-5.650521743197,-6.192422917455, + 0.486891635662)); +#119182 = CARTESIAN_POINT('',(-5.676890518986,-6.134063914492, + 0.497378327132)); +#119183 = CARTESIAN_POINT('',(-5.691911866053,-6.104553515557,0.5)); +#119184 = CARTESIAN_POINT('',(-5.708974596216,-6.075,0.5)); +#119185 = ORIENTED_EDGE('',*,*,#119186,.T.); +#119186 = EDGE_CURVE('',#105221,#119187,#119189,.T.); +#119187 = VERTEX_POINT('',#119188); +#119188 = CARTESIAN_POINT('',(-4.291421356237,-6.575,0.)); +#119189 = LINE('',#119190,#119191); +#119190 = CARTESIAN_POINT('',(-5.575,-6.575,0.)); +#119191 = VECTOR('',#119192,1.); +#119192 = DIRECTION('',(1.,0.,0.)); +#119193 = ORIENTED_EDGE('',*,*,#119194,.T.); +#119194 = EDGE_CURVE('',#119187,#119195,#119197,.T.); +#119195 = VERTEX_POINT('',#119196); +#119196 = CARTESIAN_POINT('',(-4.3,-6.572493718553,5.E-02)); +#119197 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119198,#119199,#119200, + #119201,#119202),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#119198 = CARTESIAN_POINT('',(-4.291421356237,-6.575,0.)); +#119199 = CARTESIAN_POINT('',(-4.294254978462,-6.575,8.014693962439E-03) + ); +#119200 = CARTESIAN_POINT('',(-4.29855458162,-6.574611284412, + 2.452188107117E-02)); +#119201 = CARTESIAN_POINT('',(-4.3,-6.573347042135,4.150953756753E-02)); +#119202 = CARTESIAN_POINT('',(-4.3,-6.572493718553,5.E-02)); +#119203 = ORIENTED_EDGE('',*,*,#119204,.F.); +#119204 = EDGE_CURVE('',#105554,#119195,#119205,.T.); +#119205 = CIRCLE('',#119206,0.5); +#119206 = AXIS2_PLACEMENT_3D('',#119207,#119208,#119209); +#119207 = CARTESIAN_POINT('',(-4.3,-6.075,0.)); +#119208 = DIRECTION('',(1.,0.,-0.)); +#119209 = DIRECTION('',(0.,0.,1.)); +#119210 = CYLINDRICAL_SURFACE('',#119211,0.5); +#119211 = AXIS2_PLACEMENT_3D('',#119212,#119213,#119214); +#119212 = CARTESIAN_POINT('',(-23.71734,-6.075,0.)); +#119213 = DIRECTION('',(1.,0.,0.)); +#119214 = DIRECTION('',(0.,0.,1.)); +#119215 = ADVANCED_FACE('',(#119216),#119263,.T.); +#119216 = FACE_BOUND('',#119217,.T.); +#119217 = EDGE_LOOP('',(#119218,#119230,#119237,#119238,#119247,#119257) + ); +#119218 = ORIENTED_EDGE('',*,*,#119219,.T.); +#119219 = EDGE_CURVE('',#119220,#119222,#119224,.T.); +#119220 = VERTEX_POINT('',#119221); +#119221 = CARTESIAN_POINT('',(2.808578643763,-6.575,0.)); +#119222 = VERTEX_POINT('',#119223); +#119223 = CARTESIAN_POINT('',(2.8,-6.572493718553,5.E-02)); +#119224 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119225,#119226,#119227, + #119228,#119229),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#119225 = CARTESIAN_POINT('',(2.808578643763,-6.575,0.)); +#119226 = CARTESIAN_POINT('',(2.805745021538,-6.575,8.014693962438E-03) + ); +#119227 = CARTESIAN_POINT('',(2.80144541838,-6.574611284412, + 2.452188107117E-02)); +#119228 = CARTESIAN_POINT('',(2.8,-6.573347042135,4.150953756753E-02)); +#119229 = CARTESIAN_POINT('',(2.8,-6.572493718553,5.E-02)); +#119230 = ORIENTED_EDGE('',*,*,#119231,.F.); +#119231 = EDGE_CURVE('',#105604,#119222,#119232,.T.); +#119232 = CIRCLE('',#119233,0.5); +#119233 = AXIS2_PLACEMENT_3D('',#119234,#119235,#119236); +#119234 = CARTESIAN_POINT('',(2.8,-6.075,0.)); +#119235 = DIRECTION('',(1.,0.,-0.)); +#119236 = DIRECTION('',(0.,0.,1.)); +#119237 = ORIENTED_EDGE('',*,*,#105603,.F.); +#119238 = ORIENTED_EDGE('',*,*,#119239,.T.); +#119239 = EDGE_CURVE('',#105596,#119240,#119242,.T.); +#119240 = VERTEX_POINT('',#119241); +#119241 = CARTESIAN_POINT('',(-2.8,-6.572493718553,5.E-02)); +#119242 = CIRCLE('',#119243,0.5); +#119243 = AXIS2_PLACEMENT_3D('',#119244,#119245,#119246); +#119244 = CARTESIAN_POINT('',(-2.8,-6.075,0.)); +#119245 = DIRECTION('',(1.,0.,-0.)); +#119246 = DIRECTION('',(0.,0.,1.)); +#119247 = ORIENTED_EDGE('',*,*,#119248,.T.); +#119248 = EDGE_CURVE('',#119240,#119249,#119251,.T.); +#119249 = VERTEX_POINT('',#119250); +#119250 = CARTESIAN_POINT('',(-2.808578643763,-6.575,0.)); +#119251 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119252,#119253,#119254, + #119255,#119256),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#119252 = CARTESIAN_POINT('',(-2.8,-6.572493718553,5.E-02)); +#119253 = CARTESIAN_POINT('',(-2.8,-6.573347042135,4.150953756753E-02)); +#119254 = CARTESIAN_POINT('',(-2.80144541838,-6.574611284412, + 2.452188107117E-02)); +#119255 = CARTESIAN_POINT('',(-2.805745021538,-6.575,8.014693962438E-03) + ); +#119256 = CARTESIAN_POINT('',(-2.808578643763,-6.575,0.)); +#119257 = ORIENTED_EDGE('',*,*,#119258,.T.); +#119258 = EDGE_CURVE('',#119249,#119220,#119259,.T.); +#119259 = LINE('',#119260,#119261); +#119260 = CARTESIAN_POINT('',(-2.808578643763,-6.575,0.)); +#119261 = VECTOR('',#119262,1.); +#119262 = DIRECTION('',(1.,0.,0.)); +#119263 = CYLINDRICAL_SURFACE('',#119264,0.5); +#119264 = AXIS2_PLACEMENT_3D('',#119265,#119266,#119267); +#119265 = CARTESIAN_POINT('',(-23.71734,-6.075,0.)); +#119266 = DIRECTION('',(1.,0.,0.)); +#119267 = DIRECTION('',(0.,0.,1.)); +#119268 = ADVANCED_FACE('',(#119269),#119298,.T.); +#119269 = FACE_BOUND('',#119270,.T.); +#119270 = EDGE_LOOP('',(#119271,#119272,#119273,#119282,#119292)); +#119271 = ORIENTED_EDGE('',*,*,#119132,.F.); +#119272 = ORIENTED_EDGE('',*,*,#105653,.F.); +#119273 = ORIENTED_EDGE('',*,*,#119274,.T.); +#119274 = EDGE_CURVE('',#105646,#119275,#119277,.T.); +#119275 = VERTEX_POINT('',#119276); +#119276 = CARTESIAN_POINT('',(4.3,-6.572493718553,5.E-02)); +#119277 = CIRCLE('',#119278,0.5); +#119278 = AXIS2_PLACEMENT_3D('',#119279,#119280,#119281); +#119279 = CARTESIAN_POINT('',(4.3,-6.075,0.)); +#119280 = DIRECTION('',(1.,0.,-0.)); +#119281 = DIRECTION('',(0.,0.,1.)); +#119282 = ORIENTED_EDGE('',*,*,#119283,.T.); +#119283 = EDGE_CURVE('',#119275,#119284,#119286,.T.); +#119284 = VERTEX_POINT('',#119285); +#119285 = CARTESIAN_POINT('',(4.291421356237,-6.575,0.)); +#119286 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#119287,#119288,#119289, + #119290,#119291),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#119287 = CARTESIAN_POINT('',(4.3,-6.572493718553,5.E-02)); +#119288 = CARTESIAN_POINT('',(4.3,-6.573347042135,4.150953756753E-02)); +#119289 = CARTESIAN_POINT('',(4.29855458162,-6.574611284412, + 2.452188107117E-02)); +#119290 = CARTESIAN_POINT('',(4.294254978462,-6.575,8.014693962439E-03) + ); +#119291 = CARTESIAN_POINT('',(4.291421356237,-6.575,0.)); +#119292 = ORIENTED_EDGE('',*,*,#119293,.T.); +#119293 = EDGE_CURVE('',#119284,#105096,#119294,.T.); +#119294 = LINE('',#119295,#119296); +#119295 = CARTESIAN_POINT('',(4.291421356237,-6.575,0.)); +#119296 = VECTOR('',#119297,1.); +#119297 = DIRECTION('',(1.,0.,0.)); +#119298 = CYLINDRICAL_SURFACE('',#119299,0.5); +#119299 = AXIS2_PLACEMENT_3D('',#119300,#119301,#119302); +#119300 = CARTESIAN_POINT('',(-23.71734,-6.075,0.)); +#119301 = DIRECTION('',(1.,0.,0.)); +#119302 = DIRECTION('',(0.,0.,1.)); +#119303 = ADVANCED_FACE('',(#119304),#119329,.F.); +#119304 = FACE_BOUND('',#119305,.T.); +#119305 = EDGE_LOOP('',(#119306,#119307,#119308,#119316,#119322,#119323) + ); +#119306 = ORIENTED_EDGE('',*,*,#105561,.F.); +#119307 = ORIENTED_EDGE('',*,*,#119204,.T.); +#119308 = ORIENTED_EDGE('',*,*,#119309,.T.); +#119309 = EDGE_CURVE('',#119195,#119310,#119312,.T.); +#119310 = VERTEX_POINT('',#119311); +#119311 = CARTESIAN_POINT('',(-4.3,-6.075,5.E-02)); +#119312 = LINE('',#119313,#119314); +#119313 = CARTESIAN_POINT('',(-4.3,-6.572493718553,5.E-02)); +#119314 = VECTOR('',#119315,1.); +#119315 = DIRECTION('',(0.,1.,0.)); +#119316 = ORIENTED_EDGE('',*,*,#119317,.T.); +#119317 = EDGE_CURVE('',#119310,#105205,#119318,.T.); +#119318 = LINE('',#119319,#119320); +#119319 = CARTESIAN_POINT('',(-4.3,-6.075,5.E-02)); +#119320 = VECTOR('',#119321,1.); +#119321 = DIRECTION('',(0.,-1.7763568394E-14,-1.)); +#119322 = ORIENTED_EDGE('',*,*,#105204,.T.); +#119323 = ORIENTED_EDGE('',*,*,#119324,.F.); +#119324 = EDGE_CURVE('',#105562,#105196,#119325,.T.); +#119325 = LINE('',#119326,#119327); +#119326 = CARTESIAN_POINT('',(-4.3,-5.925,0.5)); +#119327 = VECTOR('',#119328,1.); +#119328 = DIRECTION('',(0.,0.,-1.)); +#119329 = PLANE('',#119330); +#119330 = AXIS2_PLACEMENT_3D('',#119331,#119332,#119333); +#119331 = CARTESIAN_POINT('',(-4.3,-5.775,0.5)); +#119332 = DIRECTION('',(-1.,0.,0.)); +#119333 = DIRECTION('',(0.,0.,1.)); +#119334 = ADVANCED_FACE('',(#119335),#119346,.F.); +#119335 = FACE_BOUND('',#119336,.F.); +#119336 = EDGE_LOOP('',(#119337,#119338,#119339,#119345)); +#119337 = ORIENTED_EDGE('',*,*,#119324,.F.); +#119338 = ORIENTED_EDGE('',*,*,#105569,.T.); +#119339 = ORIENTED_EDGE('',*,*,#119340,.T.); +#119340 = EDGE_CURVE('',#105570,#105188,#119341,.T.); +#119341 = LINE('',#119342,#119343); +#119342 = CARTESIAN_POINT('',(-4.15,-5.775,0.5)); +#119343 = VECTOR('',#119344,1.); +#119344 = DIRECTION('',(0.,0.,-1.)); +#119345 = ORIENTED_EDGE('',*,*,#105195,.T.); +#119346 = CYLINDRICAL_SURFACE('',#119347,0.15); +#119347 = AXIS2_PLACEMENT_3D('',#119348,#119349,#119350); +#119348 = CARTESIAN_POINT('',(-4.15,-5.925,18.48968)); +#119349 = DIRECTION('',(0.,0.,-1.)); +#119350 = DIRECTION('',(-1.,0.,0.)); +#119351 = ADVANCED_FACE('',(#119352),#119363,.F.); +#119352 = FACE_BOUND('',#119353,.T.); +#119353 = EDGE_LOOP('',(#119354,#119355,#119361,#119362)); +#119354 = ORIENTED_EDGE('',*,*,#105187,.F.); +#119355 = ORIENTED_EDGE('',*,*,#119356,.F.); +#119356 = EDGE_CURVE('',#105579,#105179,#119357,.T.); +#119357 = LINE('',#119358,#119359); +#119358 = CARTESIAN_POINT('',(-2.95,-5.775,0.5)); +#119359 = VECTOR('',#119360,1.); +#119360 = DIRECTION('',(0.,0.,-1.)); +#119361 = ORIENTED_EDGE('',*,*,#105578,.T.); +#119362 = ORIENTED_EDGE('',*,*,#119340,.T.); +#119363 = PLANE('',#119364); +#119364 = AXIS2_PLACEMENT_3D('',#119365,#119366,#119367); +#119365 = CARTESIAN_POINT('',(-2.8,-5.775,0.5)); +#119366 = DIRECTION('',(-0.,1.,0.)); +#119367 = DIRECTION('',(1.,0.,0.)); +#119368 = ADVANCED_FACE('',(#119369),#119380,.F.); +#119369 = FACE_BOUND('',#119370,.F.); +#119370 = EDGE_LOOP('',(#119371,#119372,#119373,#119379)); +#119371 = ORIENTED_EDGE('',*,*,#119356,.F.); +#119372 = ORIENTED_EDGE('',*,*,#105586,.T.); +#119373 = ORIENTED_EDGE('',*,*,#119374,.T.); +#119374 = EDGE_CURVE('',#105587,#105171,#119375,.T.); +#119375 = LINE('',#119376,#119377); +#119376 = CARTESIAN_POINT('',(-2.8,-5.925,0.5)); +#119377 = VECTOR('',#119378,1.); +#119378 = DIRECTION('',(0.,0.,-1.)); +#119379 = ORIENTED_EDGE('',*,*,#105178,.T.); +#119380 = CYLINDRICAL_SURFACE('',#119381,0.15); +#119381 = AXIS2_PLACEMENT_3D('',#119382,#119383,#119384); +#119382 = CARTESIAN_POINT('',(-2.95,-5.925,18.48968)); +#119383 = DIRECTION('',(0.,0.,-1.)); +#119384 = DIRECTION('',(0.,1.,0.)); +#119385 = ADVANCED_FACE('',(#119386),#119406,.F.); +#119386 = FACE_BOUND('',#119387,.T.); +#119387 = EDGE_LOOP('',(#119388,#119389,#119397,#119403,#119404,#119405) + ); +#119388 = ORIENTED_EDGE('',*,*,#105170,.F.); +#119389 = ORIENTED_EDGE('',*,*,#119390,.F.); +#119390 = EDGE_CURVE('',#119391,#105163,#119393,.T.); +#119391 = VERTEX_POINT('',#119392); +#119392 = CARTESIAN_POINT('',(-2.8,-6.075,5.E-02)); +#119393 = LINE('',#119394,#119395); +#119394 = CARTESIAN_POINT('',(-2.8,-6.075,5.E-02)); +#119395 = VECTOR('',#119396,1.); +#119396 = DIRECTION('',(0.,0.,-1.)); +#119397 = ORIENTED_EDGE('',*,*,#119398,.T.); +#119398 = EDGE_CURVE('',#119391,#119240,#119399,.T.); +#119399 = LINE('',#119400,#119401); +#119400 = CARTESIAN_POINT('',(-2.8,-6.075,5.E-02)); +#119401 = VECTOR('',#119402,1.); +#119402 = DIRECTION('',(0.,-1.,0.)); +#119403 = ORIENTED_EDGE('',*,*,#119239,.F.); +#119404 = ORIENTED_EDGE('',*,*,#105595,.T.); +#119405 = ORIENTED_EDGE('',*,*,#119374,.T.); +#119406 = PLANE('',#119407); +#119407 = AXIS2_PLACEMENT_3D('',#119408,#119409,#119410); +#119408 = CARTESIAN_POINT('',(-2.8,-6.575,0.5)); +#119409 = DIRECTION('',(1.,0.,0.)); +#119410 = DIRECTION('',(-0.,1.,0.)); +#119411 = ADVANCED_FACE('',(#119412),#119440,.F.); +#119412 = FACE_BOUND('',#119413,.F.); +#119413 = EDGE_LOOP('',(#119414,#119424,#119431,#119432,#119433)); +#119414 = ORIENTED_EDGE('',*,*,#119415,.F.); +#119415 = EDGE_CURVE('',#119416,#119418,#119420,.T.); +#119416 = VERTEX_POINT('',#119417); +#119417 = CARTESIAN_POINT('',(-2.95,-6.075,-0.1)); +#119418 = VERTEX_POINT('',#119419); +#119419 = CARTESIAN_POINT('',(-2.95,-6.575,-0.1)); +#119420 = LINE('',#119421,#119422); +#119421 = CARTESIAN_POINT('',(-2.95,-6.075,-0.1)); +#119422 = VECTOR('',#119423,1.); +#119423 = DIRECTION('',(0.,-1.,0.)); +#119424 = ORIENTED_EDGE('',*,*,#119425,.T.); +#119425 = EDGE_CURVE('',#119416,#119391,#119426,.T.); +#119426 = CIRCLE('',#119427,0.15); +#119427 = AXIS2_PLACEMENT_3D('',#119428,#119429,#119430); +#119428 = CARTESIAN_POINT('',(-2.95,-6.075,5.E-02)); +#119429 = DIRECTION('',(0.,-1.,0.)); +#119430 = DIRECTION('',(0.,0.,-1.)); +#119431 = ORIENTED_EDGE('',*,*,#119398,.T.); +#119432 = ORIENTED_EDGE('',*,*,#119248,.T.); +#119433 = ORIENTED_EDGE('',*,*,#119434,.T.); +#119434 = EDGE_CURVE('',#119249,#119418,#119435,.T.); +#119435 = CIRCLE('',#119436,0.15); +#119436 = AXIS2_PLACEMENT_3D('',#119437,#119438,#119439); +#119437 = CARTESIAN_POINT('',(-2.95,-6.575,5.E-02)); +#119438 = DIRECTION('',(0.,1.,0.)); +#119439 = DIRECTION('',(0.942809041582,0.,-0.333333333333)); +#119440 = CYLINDRICAL_SURFACE('',#119441,0.15); +#119441 = AXIS2_PLACEMENT_3D('',#119442,#119443,#119444); +#119442 = CARTESIAN_POINT('',(-2.95,23.71788209057,5.E-02)); +#119443 = DIRECTION('',(0.,-1.,0.)); +#119444 = DIRECTION('',(0.,0.,-1.)); +#119445 = ADVANCED_FACE('',(#119446),#119471,.T.); +#119446 = FACE_BOUND('',#119447,.T.); +#119447 = EDGE_LOOP('',(#119448,#119456,#119457,#119465)); +#119448 = ORIENTED_EDGE('',*,*,#119449,.T.); +#119449 = EDGE_CURVE('',#119450,#119418,#119452,.T.); +#119450 = VERTEX_POINT('',#119451); +#119451 = CARTESIAN_POINT('',(-4.15,-6.575,-0.1)); +#119452 = LINE('',#119453,#119454); +#119453 = CARTESIAN_POINT('',(-4.15,-6.575,-0.1)); +#119454 = VECTOR('',#119455,1.); +#119455 = DIRECTION('',(1.,0.,0.)); +#119456 = ORIENTED_EDGE('',*,*,#119415,.F.); +#119457 = ORIENTED_EDGE('',*,*,#119458,.F.); +#119458 = EDGE_CURVE('',#119459,#119416,#119461,.T.); +#119459 = VERTEX_POINT('',#119460); +#119460 = CARTESIAN_POINT('',(-4.15,-6.075,-0.1)); +#119461 = LINE('',#119462,#119463); +#119462 = CARTESIAN_POINT('',(-4.15,-6.075,-0.1)); +#119463 = VECTOR('',#119464,1.); +#119464 = DIRECTION('',(1.,0.,0.)); +#119465 = ORIENTED_EDGE('',*,*,#119466,.F.); +#119466 = EDGE_CURVE('',#119450,#119459,#119467,.T.); +#119467 = LINE('',#119468,#119469); +#119468 = CARTESIAN_POINT('',(-4.15,-6.575,-0.1)); +#119469 = VECTOR('',#119470,1.); +#119470 = DIRECTION('',(0.,1.,0.)); +#119471 = PLANE('',#119472); +#119472 = AXIS2_PLACEMENT_3D('',#119473,#119474,#119475); +#119473 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#119474 = DIRECTION('',(0.,0.,1.)); +#119475 = DIRECTION('',(1.,0.,-0.)); +#119476 = ADVANCED_FACE('',(#119477),#119511,.T.); +#119477 = FACE_BOUND('',#119478,.T.); +#119478 = EDGE_LOOP('',(#119479,#119489,#119497,#119505)); +#119479 = ORIENTED_EDGE('',*,*,#119480,.T.); +#119480 = EDGE_CURVE('',#119481,#119483,#119485,.T.); +#119481 = VERTEX_POINT('',#119482); +#119482 = CARTESIAN_POINT('',(2.95,-6.575,-0.1)); +#119483 = VERTEX_POINT('',#119484); +#119484 = CARTESIAN_POINT('',(4.15,-6.575,-0.1)); +#119485 = LINE('',#119486,#119487); +#119486 = CARTESIAN_POINT('',(2.95,-6.575,-0.1)); +#119487 = VECTOR('',#119488,1.); +#119488 = DIRECTION('',(1.,0.,0.)); +#119489 = ORIENTED_EDGE('',*,*,#119490,.F.); +#119490 = EDGE_CURVE('',#119491,#119483,#119493,.T.); +#119491 = VERTEX_POINT('',#119492); +#119492 = CARTESIAN_POINT('',(4.15,-6.075,-0.1)); +#119493 = LINE('',#119494,#119495); +#119494 = CARTESIAN_POINT('',(4.15,-6.075,-0.1)); +#119495 = VECTOR('',#119496,1.); +#119496 = DIRECTION('',(0.,-1.,0.)); +#119497 = ORIENTED_EDGE('',*,*,#119498,.F.); +#119498 = EDGE_CURVE('',#119499,#119491,#119501,.T.); +#119499 = VERTEX_POINT('',#119500); +#119500 = CARTESIAN_POINT('',(2.95,-6.075,-0.1)); +#119501 = LINE('',#119502,#119503); +#119502 = CARTESIAN_POINT('',(2.95,-6.075,-0.1)); +#119503 = VECTOR('',#119504,1.); +#119504 = DIRECTION('',(1.,0.,0.)); +#119505 = ORIENTED_EDGE('',*,*,#119506,.F.); +#119506 = EDGE_CURVE('',#119481,#119499,#119507,.T.); +#119507 = LINE('',#119508,#119509); +#119508 = CARTESIAN_POINT('',(2.95,-6.575,-0.1)); +#119509 = VECTOR('',#119510,1.); +#119510 = DIRECTION('',(0.,1.,0.)); +#119511 = PLANE('',#119512); +#119512 = AXIS2_PLACEMENT_3D('',#119513,#119514,#119515); +#119513 = CARTESIAN_POINT('',(0.,0.,-0.1)); +#119514 = DIRECTION('',(0.,0.,1.)); +#119515 = DIRECTION('',(1.,0.,-0.)); +#119516 = ADVANCED_FACE('',(#119517),#119536,.F.); +#119517 = FACE_BOUND('',#119518,.F.); +#119518 = EDGE_LOOP('',(#119519,#119520,#119527,#119528,#119529)); +#119519 = ORIENTED_EDGE('',*,*,#119466,.F.); +#119520 = ORIENTED_EDGE('',*,*,#119521,.T.); +#119521 = EDGE_CURVE('',#119450,#119187,#119522,.T.); +#119522 = CIRCLE('',#119523,0.15); +#119523 = AXIS2_PLACEMENT_3D('',#119524,#119525,#119526); +#119524 = CARTESIAN_POINT('',(-4.15,-6.575,5.E-02)); +#119525 = DIRECTION('',(0.,1.,0.)); +#119526 = DIRECTION('',(0.,0.,-1.)); +#119527 = ORIENTED_EDGE('',*,*,#119194,.T.); +#119528 = ORIENTED_EDGE('',*,*,#119309,.T.); +#119529 = ORIENTED_EDGE('',*,*,#119530,.T.); +#119530 = EDGE_CURVE('',#119310,#119459,#119531,.T.); +#119531 = CIRCLE('',#119532,0.15); +#119532 = AXIS2_PLACEMENT_3D('',#119533,#119534,#119535); +#119533 = CARTESIAN_POINT('',(-4.15,-6.075,5.E-02)); +#119534 = DIRECTION('',(0.,-1.,0.)); +#119535 = DIRECTION('',(-1.,-0.,-1.246832498358E-14)); +#119536 = CYLINDRICAL_SURFACE('',#119537,0.15); +#119537 = AXIS2_PLACEMENT_3D('',#119538,#119539,#119540); +#119538 = CARTESIAN_POINT('',(-4.15,-23.71788209056,5.E-02)); +#119539 = DIRECTION('',(0.,1.,0.)); +#119540 = DIRECTION('',(0.,0.,-1.)); +#119541 = ADVANCED_FACE('',(#119542),#119765,.T.); +#119542 = FACE_BOUND('',#119543,.T.); +#119543 = EDGE_LOOP('',(#119544,#119554,#119562,#119570,#119578,#119586, + #119594,#119602,#119610,#119619,#119625,#119626,#119633,#119634, + #119641,#119642,#119643,#119644,#119645,#119646,#119654,#119663, + #119671,#119679,#119687,#119695,#119703,#119711,#119719,#119727, + #119735,#119743,#119751,#119759)); +#119544 = ORIENTED_EDGE('',*,*,#119545,.T.); +#119545 = EDGE_CURVE('',#119546,#119548,#119550,.T.); +#119546 = VERTEX_POINT('',#119547); +#119547 = CARTESIAN_POINT('',(4.35,-6.575,-9.281273756922)); +#119548 = VERTEX_POINT('',#119549); +#119549 = CARTESIAN_POINT('',(4.575,-6.575,-9.281273756922)); +#119550 = LINE('',#119551,#119552); +#119551 = CARTESIAN_POINT('',(4.35,-6.575,-9.281273756922)); +#119552 = VECTOR('',#119553,1.); +#119553 = DIRECTION('',(1.,0.,0.)); +#119554 = ORIENTED_EDGE('',*,*,#119555,.T.); +#119555 = EDGE_CURVE('',#119548,#119556,#119558,.T.); +#119556 = VERTEX_POINT('',#119557); +#119557 = CARTESIAN_POINT('',(4.575,-6.575,-10.7553)); +#119558 = LINE('',#119559,#119560); +#119559 = CARTESIAN_POINT('',(4.575,-6.575,-9.281273756922)); +#119560 = VECTOR('',#119561,1.); +#119561 = DIRECTION('',(0.,0.,-1.)); +#119562 = ORIENTED_EDGE('',*,*,#119563,.T.); +#119563 = EDGE_CURVE('',#119556,#119564,#119566,.T.); +#119564 = VERTEX_POINT('',#119565); +#119565 = CARTESIAN_POINT('',(5.975,-6.575,-10.7553)); +#119566 = LINE('',#119567,#119568); +#119567 = CARTESIAN_POINT('',(4.575,-6.575,-10.7553)); +#119568 = VECTOR('',#119569,1.); +#119569 = DIRECTION('',(1.,0.,0.)); +#119570 = ORIENTED_EDGE('',*,*,#119571,.F.); +#119571 = EDGE_CURVE('',#119572,#119564,#119574,.T.); +#119572 = VERTEX_POINT('',#119573); +#119573 = CARTESIAN_POINT('',(6.575,-6.575,-10.7553)); +#119574 = LINE('',#119575,#119576); +#119575 = CARTESIAN_POINT('',(6.575,-6.575,-10.7553)); +#119576 = VECTOR('',#119577,1.); +#119577 = DIRECTION('',(-1.,0.,0.)); +#119578 = ORIENTED_EDGE('',*,*,#119579,.F.); +#119579 = EDGE_CURVE('',#119580,#119572,#119582,.T.); +#119580 = VERTEX_POINT('',#119581); +#119581 = CARTESIAN_POINT('',(6.575,-6.575,-5.8208)); +#119582 = LINE('',#119583,#119584); +#119583 = CARTESIAN_POINT('',(6.575,-6.575,-5.8208)); +#119584 = VECTOR('',#119585,1.); +#119585 = DIRECTION('',(0.,0.,-1.)); +#119586 = ORIENTED_EDGE('',*,*,#119587,.F.); +#119587 = EDGE_CURVE('',#119588,#119580,#119590,.T.); +#119588 = VERTEX_POINT('',#119589); +#119589 = CARTESIAN_POINT('',(5.975,-6.575,-5.8208)); +#119590 = LINE('',#119591,#119592); +#119591 = CARTESIAN_POINT('',(5.975,-6.575,-5.8208)); +#119592 = VECTOR('',#119593,1.); +#119593 = DIRECTION('',(1.,0.,0.)); +#119594 = ORIENTED_EDGE('',*,*,#119595,.F.); +#119595 = EDGE_CURVE('',#119596,#119588,#119598,.T.); +#119596 = VERTEX_POINT('',#119597); +#119597 = CARTESIAN_POINT('',(5.975,-6.575,-1.2)); +#119598 = LINE('',#119599,#119600); +#119599 = CARTESIAN_POINT('',(5.975,-6.575,-1.2)); +#119600 = VECTOR('',#119601,1.); +#119601 = DIRECTION('',(0.,0.,-1.)); +#119602 = ORIENTED_EDGE('',*,*,#119603,.F.); +#119603 = EDGE_CURVE('',#119604,#119596,#119606,.T.); +#119604 = VERTEX_POINT('',#119605); +#119605 = CARTESIAN_POINT('',(5.609475380552,-6.575,-0.377569606242)); +#119606 = LINE('',#119607,#119608); +#119607 = CARTESIAN_POINT('',(5.609475380552,-6.575,-0.377569606242)); +#119608 = VECTOR('',#119609,1.); +#119609 = DIRECTION('',(0.406138466053,0.,-0.91381154862)); +#119610 = ORIENTED_EDGE('',*,*,#119611,.T.); +#119611 = EDGE_CURVE('',#119604,#119612,#119614,.T.); +#119612 = VERTEX_POINT('',#119613); +#119613 = CARTESIAN_POINT('',(5.575,-6.575,-0.21511421982)); +#119614 = CIRCLE('',#119615,0.4); +#119615 = AXIS2_PLACEMENT_3D('',#119616,#119617,#119618); +#119616 = CARTESIAN_POINT('',(5.975,-6.575,-0.21511421982)); +#119617 = DIRECTION('',(0.,1.,0.)); +#119618 = DIRECTION('',(-0.91381154862,0.,-0.406138466053)); +#119619 = ORIENTED_EDGE('',*,*,#119620,.F.); +#119620 = EDGE_CURVE('',#105096,#119612,#119621,.T.); +#119621 = LINE('',#119622,#119623); +#119622 = CARTESIAN_POINT('',(5.575,-6.575,0.)); +#119623 = VECTOR('',#119624,1.); +#119624 = DIRECTION('',(0.,0.,-1.)); +#119625 = ORIENTED_EDGE('',*,*,#119293,.F.); +#119626 = ORIENTED_EDGE('',*,*,#119627,.T.); +#119627 = EDGE_CURVE('',#119284,#119483,#119628,.T.); +#119628 = CIRCLE('',#119629,0.15); +#119629 = AXIS2_PLACEMENT_3D('',#119630,#119631,#119632); +#119630 = CARTESIAN_POINT('',(4.15,-6.575,5.E-02)); +#119631 = DIRECTION('',(0.,1.,0.)); +#119632 = DIRECTION('',(0.942809041582,0.,-0.333333333333)); +#119633 = ORIENTED_EDGE('',*,*,#119480,.F.); +#119634 = ORIENTED_EDGE('',*,*,#119635,.T.); +#119635 = EDGE_CURVE('',#119481,#119220,#119636,.T.); +#119636 = CIRCLE('',#119637,0.15); +#119637 = AXIS2_PLACEMENT_3D('',#119638,#119639,#119640); +#119638 = CARTESIAN_POINT('',(2.95,-6.575,5.E-02)); +#119639 = DIRECTION('',(0.,1.,0.)); +#119640 = DIRECTION('',(0.,0.,-1.)); +#119641 = ORIENTED_EDGE('',*,*,#119258,.F.); +#119642 = ORIENTED_EDGE('',*,*,#119434,.T.); +#119643 = ORIENTED_EDGE('',*,*,#119449,.F.); +#119644 = ORIENTED_EDGE('',*,*,#119521,.T.); +#119645 = ORIENTED_EDGE('',*,*,#119186,.F.); +#119646 = ORIENTED_EDGE('',*,*,#119647,.F.); +#119647 = EDGE_CURVE('',#119648,#105221,#119650,.T.); +#119648 = VERTEX_POINT('',#119649); +#119649 = CARTESIAN_POINT('',(-5.575,-6.575,-0.21511421982)); +#119650 = LINE('',#119651,#119652); +#119651 = CARTESIAN_POINT('',(-5.575,-6.575,-0.21511421982)); +#119652 = VECTOR('',#119653,1.); +#119653 = DIRECTION('',(-1.23866068051E-14,-2.064434467516E-14,1.)); +#119654 = ORIENTED_EDGE('',*,*,#119655,.T.); +#119655 = EDGE_CURVE('',#119648,#119656,#119658,.T.); +#119656 = VERTEX_POINT('',#119657); +#119657 = CARTESIAN_POINT('',(-5.609475380552,-6.575,-0.377569606242)); +#119658 = CIRCLE('',#119659,0.4); +#119659 = AXIS2_PLACEMENT_3D('',#119660,#119661,#119662); +#119660 = CARTESIAN_POINT('',(-5.975,-6.575,-0.21511421982)); +#119661 = DIRECTION('',(-0.,1.,0.)); +#119662 = DIRECTION('',(1.,0.,0.)); +#119663 = ORIENTED_EDGE('',*,*,#119664,.F.); +#119664 = EDGE_CURVE('',#119665,#119656,#119667,.T.); +#119665 = VERTEX_POINT('',#119666); +#119666 = CARTESIAN_POINT('',(-5.975,-6.575,-1.2)); +#119667 = LINE('',#119668,#119669); +#119668 = CARTESIAN_POINT('',(-5.975,-6.575,-1.2)); +#119669 = VECTOR('',#119670,1.); +#119670 = DIRECTION('',(0.406138466053,0.,0.91381154862)); +#119671 = ORIENTED_EDGE('',*,*,#119672,.F.); +#119672 = EDGE_CURVE('',#119673,#119665,#119675,.T.); +#119673 = VERTEX_POINT('',#119674); +#119674 = CARTESIAN_POINT('',(-5.975,-6.575,-5.8208)); +#119675 = LINE('',#119676,#119677); +#119676 = CARTESIAN_POINT('',(-5.975,-6.575,-5.8208)); +#119677 = VECTOR('',#119678,1.); +#119678 = DIRECTION('',(0.,0.,1.)); +#119679 = ORIENTED_EDGE('',*,*,#119680,.F.); +#119680 = EDGE_CURVE('',#119681,#119673,#119683,.T.); +#119681 = VERTEX_POINT('',#119682); +#119682 = CARTESIAN_POINT('',(-6.575,-6.575,-5.8208)); +#119683 = LINE('',#119684,#119685); +#119684 = CARTESIAN_POINT('',(-6.575,-6.575,-5.8208)); +#119685 = VECTOR('',#119686,1.); +#119686 = DIRECTION('',(1.,0.,0.)); +#119687 = ORIENTED_EDGE('',*,*,#119688,.F.); +#119688 = EDGE_CURVE('',#119689,#119681,#119691,.T.); +#119689 = VERTEX_POINT('',#119690); +#119690 = CARTESIAN_POINT('',(-6.575,-6.575,-10.7553)); +#119691 = LINE('',#119692,#119693); +#119692 = CARTESIAN_POINT('',(-6.575,-6.575,-10.7553)); +#119693 = VECTOR('',#119694,1.); +#119694 = DIRECTION('',(0.,0.,1.)); +#119695 = ORIENTED_EDGE('',*,*,#119696,.F.); +#119696 = EDGE_CURVE('',#119697,#119689,#119699,.T.); +#119697 = VERTEX_POINT('',#119698); +#119698 = CARTESIAN_POINT('',(-5.975,-6.575,-10.7553)); +#119699 = LINE('',#119700,#119701); +#119700 = CARTESIAN_POINT('',(-5.975,-6.575,-10.7553)); +#119701 = VECTOR('',#119702,1.); +#119702 = DIRECTION('',(-1.,0.,0.)); +#119703 = ORIENTED_EDGE('',*,*,#119704,.T.); +#119704 = EDGE_CURVE('',#119697,#119705,#119707,.T.); +#119705 = VERTEX_POINT('',#119706); +#119706 = CARTESIAN_POINT('',(-4.575,-6.575,-10.7553)); +#119707 = LINE('',#119708,#119709); +#119708 = CARTESIAN_POINT('',(-5.975,-6.575,-10.7553)); +#119709 = VECTOR('',#119710,1.); +#119710 = DIRECTION('',(1.,0.,0.)); +#119711 = ORIENTED_EDGE('',*,*,#119712,.T.); +#119712 = EDGE_CURVE('',#119705,#119713,#119715,.T.); +#119713 = VERTEX_POINT('',#119714); +#119714 = CARTESIAN_POINT('',(-4.575,-6.575,-9.281273756922)); +#119715 = LINE('',#119716,#119717); +#119716 = CARTESIAN_POINT('',(-4.575,-6.575,-10.7553)); +#119717 = VECTOR('',#119718,1.); +#119718 = DIRECTION('',(0.,0.,1.)); +#119719 = ORIENTED_EDGE('',*,*,#119720,.T.); +#119720 = EDGE_CURVE('',#119713,#119721,#119723,.T.); +#119721 = VERTEX_POINT('',#119722); +#119722 = CARTESIAN_POINT('',(-4.35,-6.575,-9.281273756922)); +#119723 = LINE('',#119724,#119725); +#119724 = CARTESIAN_POINT('',(-4.575,-6.575,-9.281273756922)); +#119725 = VECTOR('',#119726,1.); +#119726 = DIRECTION('',(1.,0.,0.)); +#119727 = ORIENTED_EDGE('',*,*,#119728,.T.); +#119728 = EDGE_CURVE('',#119721,#119729,#119731,.T.); +#119729 = VERTEX_POINT('',#119730); +#119730 = CARTESIAN_POINT('',(-4.35,-6.575,-2.9)); +#119731 = LINE('',#119732,#119733); +#119732 = CARTESIAN_POINT('',(-4.35,-6.575,-9.281273756922)); +#119733 = VECTOR('',#119734,1.); +#119734 = DIRECTION('',(0.,0.,1.)); +#119735 = ORIENTED_EDGE('',*,*,#119736,.T.); +#119736 = EDGE_CURVE('',#119729,#119737,#119739,.T.); +#119737 = VERTEX_POINT('',#119738); +#119738 = CARTESIAN_POINT('',(-2.45,-6.575,-1.)); +#119739 = LINE('',#119740,#119741); +#119740 = CARTESIAN_POINT('',(-4.35,-6.575,-2.9)); +#119741 = VECTOR('',#119742,1.); +#119742 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#119743 = ORIENTED_EDGE('',*,*,#119744,.F.); +#119744 = EDGE_CURVE('',#119745,#119737,#119747,.T.); +#119745 = VERTEX_POINT('',#119746); +#119746 = CARTESIAN_POINT('',(2.45,-6.575,-1.)); +#119747 = LINE('',#119748,#119749); +#119748 = CARTESIAN_POINT('',(2.45,-6.575,-1.)); +#119749 = VECTOR('',#119750,1.); +#119750 = DIRECTION('',(-1.,0.,0.)); +#119751 = ORIENTED_EDGE('',*,*,#119752,.T.); +#119752 = EDGE_CURVE('',#119745,#119753,#119755,.T.); +#119753 = VERTEX_POINT('',#119754); +#119754 = CARTESIAN_POINT('',(4.35,-6.575,-2.9)); +#119755 = LINE('',#119756,#119757); +#119756 = CARTESIAN_POINT('',(2.45,-6.575,-1.)); +#119757 = VECTOR('',#119758,1.); +#119758 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#119759 = ORIENTED_EDGE('',*,*,#119760,.F.); +#119760 = EDGE_CURVE('',#119546,#119753,#119761,.T.); +#119761 = LINE('',#119762,#119763); +#119762 = CARTESIAN_POINT('',(4.35,-6.575,-9.281273756922)); +#119763 = VECTOR('',#119764,1.); +#119764 = DIRECTION('',(0.,0.,1.)); +#119765 = PLANE('',#119766); +#119766 = AXIS2_PLACEMENT_3D('',#119767,#119768,#119769); +#119767 = CARTESIAN_POINT('',(-5.575,-6.575,0.)); +#119768 = DIRECTION('',(0.,-1.,0.)); +#119769 = DIRECTION('',(0.,0.,-1.)); +#119770 = ADVANCED_FACE('',(#119771),#119796,.F.); +#119771 = FACE_BOUND('',#119772,.T.); +#119772 = EDGE_LOOP('',(#119773,#119783,#119789,#119790)); +#119773 = ORIENTED_EDGE('',*,*,#119774,.F.); +#119774 = EDGE_CURVE('',#119775,#119777,#119779,.T.); +#119775 = VERTEX_POINT('',#119776); +#119776 = CARTESIAN_POINT('',(4.35,-6.075,-9.281273756922)); +#119777 = VERTEX_POINT('',#119778); +#119778 = CARTESIAN_POINT('',(4.35,-6.075,-2.9)); +#119779 = LINE('',#119780,#119781); +#119780 = CARTESIAN_POINT('',(4.35,-6.075,-9.281273756922)); +#119781 = VECTOR('',#119782,1.); +#119782 = DIRECTION('',(0.,0.,1.)); +#119783 = ORIENTED_EDGE('',*,*,#119784,.T.); +#119784 = EDGE_CURVE('',#119775,#119546,#119785,.T.); +#119785 = LINE('',#119786,#119787); +#119786 = CARTESIAN_POINT('',(4.35,-6.075,-9.281273756922)); +#119787 = VECTOR('',#119788,1.); +#119788 = DIRECTION('',(0.,-1.,0.)); +#119789 = ORIENTED_EDGE('',*,*,#119760,.T.); +#119790 = ORIENTED_EDGE('',*,*,#119791,.T.); +#119791 = EDGE_CURVE('',#119753,#119777,#119792,.T.); +#119792 = LINE('',#119793,#119794); +#119793 = CARTESIAN_POINT('',(4.35,-6.575,-2.9)); +#119794 = VECTOR('',#119795,1.); +#119795 = DIRECTION('',(0.,1.,0.)); +#119796 = PLANE('',#119797); +#119797 = AXIS2_PLACEMENT_3D('',#119798,#119799,#119800); +#119798 = CARTESIAN_POINT('',(4.35,-6.575,-11.2)); +#119799 = DIRECTION('',(1.,0.,0.)); +#119800 = DIRECTION('',(-0.,1.,0.)); +#119801 = ADVANCED_FACE('',(#119802),#119820,.T.); +#119802 = FACE_BOUND('',#119803,.T.); +#119803 = EDGE_LOOP('',(#119804,#119812,#119813,#119814)); +#119804 = ORIENTED_EDGE('',*,*,#119805,.F.); +#119805 = EDGE_CURVE('',#119777,#119806,#119808,.T.); +#119806 = VERTEX_POINT('',#119807); +#119807 = CARTESIAN_POINT('',(2.45,-6.075,-1.)); +#119808 = LINE('',#119809,#119810); +#119809 = CARTESIAN_POINT('',(4.35,-6.075,-2.9)); +#119810 = VECTOR('',#119811,1.); +#119811 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#119812 = ORIENTED_EDGE('',*,*,#119791,.F.); +#119813 = ORIENTED_EDGE('',*,*,#119752,.F.); +#119814 = ORIENTED_EDGE('',*,*,#119815,.T.); +#119815 = EDGE_CURVE('',#119745,#119806,#119816,.T.); +#119816 = LINE('',#119817,#119818); +#119817 = CARTESIAN_POINT('',(2.45,-6.575,-1.)); +#119818 = VECTOR('',#119819,1.); +#119819 = DIRECTION('',(0.,1.,0.)); +#119820 = PLANE('',#119821); +#119821 = AXIS2_PLACEMENT_3D('',#119822,#119823,#119824); +#119822 = CARTESIAN_POINT('',(3.4,-6.325,-1.95)); +#119823 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#119824 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#119825 = ADVANCED_FACE('',(#119826),#119844,.F.); +#119826 = FACE_BOUND('',#119827,.T.); +#119827 = EDGE_LOOP('',(#119828,#119836,#119837,#119838)); +#119828 = ORIENTED_EDGE('',*,*,#119829,.F.); +#119829 = EDGE_CURVE('',#119806,#119830,#119832,.T.); +#119830 = VERTEX_POINT('',#119831); +#119831 = CARTESIAN_POINT('',(-2.45,-6.075,-1.)); +#119832 = LINE('',#119833,#119834); +#119833 = CARTESIAN_POINT('',(2.45,-6.075,-1.)); +#119834 = VECTOR('',#119835,1.); +#119835 = DIRECTION('',(-1.,0.,0.)); +#119836 = ORIENTED_EDGE('',*,*,#119815,.F.); +#119837 = ORIENTED_EDGE('',*,*,#119744,.T.); +#119838 = ORIENTED_EDGE('',*,*,#119839,.T.); +#119839 = EDGE_CURVE('',#119737,#119830,#119840,.T.); +#119840 = LINE('',#119841,#119842); +#119841 = CARTESIAN_POINT('',(-2.45,-6.575,-1.)); +#119842 = VECTOR('',#119843,1.); +#119843 = DIRECTION('',(0.,1.,0.)); +#119844 = PLANE('',#119845); +#119845 = AXIS2_PLACEMENT_3D('',#119846,#119847,#119848); +#119846 = CARTESIAN_POINT('',(4.35,-6.575,-1.)); +#119847 = DIRECTION('',(0.,0.,1.)); +#119848 = DIRECTION('',(1.,0.,-0.)); +#119849 = ADVANCED_FACE('',(#119850),#119868,.T.); +#119850 = FACE_BOUND('',#119851,.T.); +#119851 = EDGE_LOOP('',(#119852,#119860,#119861,#119862)); +#119852 = ORIENTED_EDGE('',*,*,#119853,.F.); +#119853 = EDGE_CURVE('',#119830,#119854,#119856,.T.); +#119854 = VERTEX_POINT('',#119855); +#119855 = CARTESIAN_POINT('',(-4.35,-6.075,-2.9)); +#119856 = LINE('',#119857,#119858); +#119857 = CARTESIAN_POINT('',(-2.45,-6.075,-1.)); +#119858 = VECTOR('',#119859,1.); +#119859 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#119860 = ORIENTED_EDGE('',*,*,#119839,.F.); +#119861 = ORIENTED_EDGE('',*,*,#119736,.F.); +#119862 = ORIENTED_EDGE('',*,*,#119863,.T.); +#119863 = EDGE_CURVE('',#119729,#119854,#119864,.T.); +#119864 = LINE('',#119865,#119866); +#119865 = CARTESIAN_POINT('',(-4.35,-6.575,-2.9)); +#119866 = VECTOR('',#119867,1.); +#119867 = DIRECTION('',(0.,1.,0.)); +#119868 = PLANE('',#119869); +#119869 = AXIS2_PLACEMENT_3D('',#119870,#119871,#119872); +#119870 = CARTESIAN_POINT('',(-3.4,-6.325,-1.95)); +#119871 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#119872 = DIRECTION('',(0.,-1.,0.)); +#119873 = ADVANCED_FACE('',(#119874),#119892,.F.); +#119874 = FACE_BOUND('',#119875,.T.); +#119875 = EDGE_LOOP('',(#119876,#119877,#119885,#119891)); +#119876 = ORIENTED_EDGE('',*,*,#119728,.F.); +#119877 = ORIENTED_EDGE('',*,*,#119878,.F.); +#119878 = EDGE_CURVE('',#119879,#119721,#119881,.T.); +#119879 = VERTEX_POINT('',#119880); +#119880 = CARTESIAN_POINT('',(-4.35,-6.075,-9.281273756922)); +#119881 = LINE('',#119882,#119883); +#119882 = CARTESIAN_POINT('',(-4.35,-6.075,-9.281273756922)); +#119883 = VECTOR('',#119884,1.); +#119884 = DIRECTION('',(0.,-1.,0.)); +#119885 = ORIENTED_EDGE('',*,*,#119886,.T.); +#119886 = EDGE_CURVE('',#119879,#119854,#119887,.T.); +#119887 = LINE('',#119888,#119889); +#119888 = CARTESIAN_POINT('',(-4.35,-6.075,-9.281273756922)); +#119889 = VECTOR('',#119890,1.); +#119890 = DIRECTION('',(0.,0.,1.)); +#119891 = ORIENTED_EDGE('',*,*,#119863,.F.); +#119892 = PLANE('',#119893); +#119893 = AXIS2_PLACEMENT_3D('',#119894,#119895,#119896); +#119894 = CARTESIAN_POINT('',(-4.35,-6.575,-1.)); +#119895 = DIRECTION('',(-1.,0.,0.)); +#119896 = DIRECTION('',(0.,0.,1.)); +#119897 = ADVANCED_FACE('',(#119898),#120136,.T.); +#119898 = FACE_BOUND('',#119899,.T.); +#119899 = EDGE_LOOP('',(#119900,#119901,#119902,#119910,#119918,#119926, + #119934,#119943,#119951,#119959,#119967,#119975,#119983,#119992, + #119998,#119999,#120000,#120001,#120002,#120003,#120004,#120005, + #120013,#120020,#120021,#120030,#120036,#120037,#120045,#120054, + #120062,#120070,#120078,#120086,#120094,#120103,#120111,#120119, + #120127,#120133,#120134,#120135)); +#119900 = ORIENTED_EDGE('',*,*,#119853,.T.); +#119901 = ORIENTED_EDGE('',*,*,#119886,.F.); +#119902 = ORIENTED_EDGE('',*,*,#119903,.F.); +#119903 = EDGE_CURVE('',#119904,#119879,#119906,.T.); +#119904 = VERTEX_POINT('',#119905); +#119905 = CARTESIAN_POINT('',(-4.575,-6.075,-9.281273756922)); +#119906 = LINE('',#119907,#119908); +#119907 = CARTESIAN_POINT('',(-4.575,-6.075,-9.281273756922)); +#119908 = VECTOR('',#119909,1.); +#119909 = DIRECTION('',(1.,0.,0.)); +#119910 = ORIENTED_EDGE('',*,*,#119911,.F.); +#119911 = EDGE_CURVE('',#119912,#119904,#119914,.T.); +#119912 = VERTEX_POINT('',#119913); +#119913 = CARTESIAN_POINT('',(-4.575,-6.075,-10.7553)); +#119914 = LINE('',#119915,#119916); +#119915 = CARTESIAN_POINT('',(-4.575,-6.075,-10.7553)); +#119916 = VECTOR('',#119917,1.); +#119917 = DIRECTION('',(0.,0.,1.)); +#119918 = ORIENTED_EDGE('',*,*,#119919,.T.); +#119919 = EDGE_CURVE('',#119912,#119920,#119922,.T.); +#119920 = VERTEX_POINT('',#119921); +#119921 = CARTESIAN_POINT('',(-5.775,-6.075,-10.7553)); +#119922 = LINE('',#119923,#119924); +#119923 = CARTESIAN_POINT('',(-4.575,-6.075,-10.7553)); +#119924 = VECTOR('',#119925,1.); +#119925 = DIRECTION('',(-1.,0.,0.)); +#119926 = ORIENTED_EDGE('',*,*,#119927,.F.); +#119927 = EDGE_CURVE('',#119928,#119920,#119930,.T.); +#119928 = VERTEX_POINT('',#119929); +#119929 = CARTESIAN_POINT('',(-5.775,-6.075,-10.9553)); +#119930 = LINE('',#119931,#119932); +#119931 = CARTESIAN_POINT('',(-5.775,-6.075,-10.9553)); +#119932 = VECTOR('',#119933,1.); +#119933 = DIRECTION('',(0.,0.,1.)); +#119934 = ORIENTED_EDGE('',*,*,#119935,.T.); +#119935 = EDGE_CURVE('',#119928,#119936,#119938,.T.); +#119936 = VERTEX_POINT('',#119937); +#119937 = CARTESIAN_POINT('',(-5.975,-6.075,-10.7553)); +#119938 = CIRCLE('',#119939,0.2); +#119939 = AXIS2_PLACEMENT_3D('',#119940,#119941,#119942); +#119940 = CARTESIAN_POINT('',(-5.975,-6.075,-10.9553)); +#119941 = DIRECTION('',(0.,-1.,0.)); +#119942 = DIRECTION('',(1.,0.,-3.469446951954E-14)); +#119943 = ORIENTED_EDGE('',*,*,#119944,.T.); +#119944 = EDGE_CURVE('',#119936,#119945,#119947,.T.); +#119945 = VERTEX_POINT('',#119946); +#119946 = CARTESIAN_POINT('',(-6.575,-6.075,-10.7553)); +#119947 = LINE('',#119948,#119949); +#119948 = CARTESIAN_POINT('',(-5.975,-6.075,-10.7553)); +#119949 = VECTOR('',#119950,1.); +#119950 = DIRECTION('',(-1.,0.,0.)); +#119951 = ORIENTED_EDGE('',*,*,#119952,.T.); +#119952 = EDGE_CURVE('',#119945,#119953,#119955,.T.); +#119953 = VERTEX_POINT('',#119954); +#119954 = CARTESIAN_POINT('',(-6.575,-6.075,-5.8208)); +#119955 = LINE('',#119956,#119957); +#119956 = CARTESIAN_POINT('',(-6.575,-6.075,-10.7553)); +#119957 = VECTOR('',#119958,1.); +#119958 = DIRECTION('',(0.,0.,1.)); +#119959 = ORIENTED_EDGE('',*,*,#119960,.T.); +#119960 = EDGE_CURVE('',#119953,#119961,#119963,.T.); +#119961 = VERTEX_POINT('',#119962); +#119962 = CARTESIAN_POINT('',(-5.975,-6.075,-5.8208)); +#119963 = LINE('',#119964,#119965); +#119964 = CARTESIAN_POINT('',(-6.575,-6.075,-5.8208)); +#119965 = VECTOR('',#119966,1.); +#119966 = DIRECTION('',(1.,0.,0.)); +#119967 = ORIENTED_EDGE('',*,*,#119968,.T.); +#119968 = EDGE_CURVE('',#119961,#119969,#119971,.T.); +#119969 = VERTEX_POINT('',#119970); +#119970 = CARTESIAN_POINT('',(-5.975,-6.075,-1.2)); +#119971 = LINE('',#119972,#119973); +#119972 = CARTESIAN_POINT('',(-5.975,-6.075,-5.8208)); +#119973 = VECTOR('',#119974,1.); +#119974 = DIRECTION('',(0.,0.,1.)); +#119975 = ORIENTED_EDGE('',*,*,#119976,.T.); +#119976 = EDGE_CURVE('',#119969,#119977,#119979,.T.); +#119977 = VERTEX_POINT('',#119978); +#119978 = CARTESIAN_POINT('',(-5.609475380552,-6.075,-0.377569606242)); +#119979 = LINE('',#119980,#119981); +#119980 = CARTESIAN_POINT('',(-5.975,-6.075,-1.2)); +#119981 = VECTOR('',#119982,1.); +#119982 = DIRECTION('',(0.406138466053,0.,0.91381154862)); +#119983 = ORIENTED_EDGE('',*,*,#119984,.T.); +#119984 = EDGE_CURVE('',#119977,#119985,#119987,.T.); +#119985 = VERTEX_POINT('',#119986); +#119986 = CARTESIAN_POINT('',(-5.575,-6.075,-0.21511421982)); +#119987 = CIRCLE('',#119988,0.4); +#119988 = AXIS2_PLACEMENT_3D('',#119989,#119990,#119991); +#119989 = CARTESIAN_POINT('',(-5.975,-6.075,-0.21511421982)); +#119990 = DIRECTION('',(0.,-1.,0.)); +#119991 = DIRECTION('',(0.91381154862,0.,-0.406138466053)); +#119992 = ORIENTED_EDGE('',*,*,#119993,.T.); +#119993 = EDGE_CURVE('',#119985,#105213,#119994,.T.); +#119994 = LINE('',#119995,#119996); +#119995 = CARTESIAN_POINT('',(-5.575,-6.075,-0.21511421982)); +#119996 = VECTOR('',#119997,1.); +#119997 = DIRECTION('',(0.,0.,1.)); +#119998 = ORIENTED_EDGE('',*,*,#105212,.T.); +#119999 = ORIENTED_EDGE('',*,*,#119317,.F.); +#120000 = ORIENTED_EDGE('',*,*,#119530,.T.); +#120001 = ORIENTED_EDGE('',*,*,#119458,.T.); +#120002 = ORIENTED_EDGE('',*,*,#119425,.T.); +#120003 = ORIENTED_EDGE('',*,*,#119390,.T.); +#120004 = ORIENTED_EDGE('',*,*,#105162,.T.); +#120005 = ORIENTED_EDGE('',*,*,#120006,.F.); +#120006 = EDGE_CURVE('',#120007,#105155,#120009,.T.); +#120007 = VERTEX_POINT('',#120008); +#120008 = CARTESIAN_POINT('',(2.8,-6.075,5.E-02)); +#120009 = LINE('',#120010,#120011); +#120010 = CARTESIAN_POINT('',(2.8,-6.075,5.E-02)); +#120011 = VECTOR('',#120012,1.); +#120012 = DIRECTION('',(0.,0.,-1.)); +#120013 = ORIENTED_EDGE('',*,*,#120014,.T.); +#120014 = EDGE_CURVE('',#120007,#119499,#120015,.T.); +#120015 = CIRCLE('',#120016,0.15); +#120016 = AXIS2_PLACEMENT_3D('',#120017,#120018,#120019); +#120017 = CARTESIAN_POINT('',(2.95,-6.075,5.E-02)); +#120018 = DIRECTION('',(0.,-1.,0.)); +#120019 = DIRECTION('',(-1.,-0.,-1.246832498358E-14)); +#120020 = ORIENTED_EDGE('',*,*,#119498,.T.); +#120021 = ORIENTED_EDGE('',*,*,#120022,.T.); +#120022 = EDGE_CURVE('',#119491,#120023,#120025,.T.); +#120023 = VERTEX_POINT('',#120024); +#120024 = CARTESIAN_POINT('',(4.3,-6.075,5.E-02)); +#120025 = CIRCLE('',#120026,0.15); +#120026 = AXIS2_PLACEMENT_3D('',#120027,#120028,#120029); +#120027 = CARTESIAN_POINT('',(4.15,-6.075,5.E-02)); +#120028 = DIRECTION('',(0.,-1.,0.)); +#120029 = DIRECTION('',(0.,0.,-1.)); +#120030 = ORIENTED_EDGE('',*,*,#120031,.T.); +#120031 = EDGE_CURVE('',#120023,#105113,#120032,.T.); +#120032 = LINE('',#120033,#120034); +#120033 = CARTESIAN_POINT('',(4.3,-6.075,5.E-02)); +#120034 = VECTOR('',#120035,1.); +#120035 = DIRECTION('',(0.,0.,-1.)); +#120036 = ORIENTED_EDGE('',*,*,#105112,.T.); +#120037 = ORIENTED_EDGE('',*,*,#120038,.T.); +#120038 = EDGE_CURVE('',#105105,#120039,#120041,.T.); +#120039 = VERTEX_POINT('',#120040); +#120040 = CARTESIAN_POINT('',(5.575,-6.075,-0.21511421982)); +#120041 = LINE('',#120042,#120043); +#120042 = CARTESIAN_POINT('',(5.575,-6.075,0.)); +#120043 = VECTOR('',#120044,1.); +#120044 = DIRECTION('',(0.,0.,-1.)); +#120045 = ORIENTED_EDGE('',*,*,#120046,.T.); +#120046 = EDGE_CURVE('',#120039,#120047,#120049,.T.); +#120047 = VERTEX_POINT('',#120048); +#120048 = CARTESIAN_POINT('',(5.609475380552,-6.075,-0.377569606242)); +#120049 = CIRCLE('',#120050,0.4); +#120050 = AXIS2_PLACEMENT_3D('',#120051,#120052,#120053); +#120051 = CARTESIAN_POINT('',(5.975,-6.075,-0.21511421982)); +#120052 = DIRECTION('',(0.,-1.,0.)); +#120053 = DIRECTION('',(-1.,0.,0.)); +#120054 = ORIENTED_EDGE('',*,*,#120055,.T.); +#120055 = EDGE_CURVE('',#120047,#120056,#120058,.T.); +#120056 = VERTEX_POINT('',#120057); +#120057 = CARTESIAN_POINT('',(5.975,-6.075,-1.2)); +#120058 = LINE('',#120059,#120060); +#120059 = CARTESIAN_POINT('',(5.609475380552,-6.075,-0.377569606242)); +#120060 = VECTOR('',#120061,1.); +#120061 = DIRECTION('',(0.406138466053,0.,-0.91381154862)); +#120062 = ORIENTED_EDGE('',*,*,#120063,.T.); +#120063 = EDGE_CURVE('',#120056,#120064,#120066,.T.); +#120064 = VERTEX_POINT('',#120065); +#120065 = CARTESIAN_POINT('',(5.975,-6.075,-5.8208)); +#120066 = LINE('',#120067,#120068); +#120067 = CARTESIAN_POINT('',(5.975,-6.075,-1.2)); +#120068 = VECTOR('',#120069,1.); +#120069 = DIRECTION('',(0.,0.,-1.)); +#120070 = ORIENTED_EDGE('',*,*,#120071,.T.); +#120071 = EDGE_CURVE('',#120064,#120072,#120074,.T.); +#120072 = VERTEX_POINT('',#120073); +#120073 = CARTESIAN_POINT('',(6.575,-6.075,-5.8208)); +#120074 = LINE('',#120075,#120076); +#120075 = CARTESIAN_POINT('',(5.975,-6.075,-5.8208)); +#120076 = VECTOR('',#120077,1.); +#120077 = DIRECTION('',(1.,0.,0.)); +#120078 = ORIENTED_EDGE('',*,*,#120079,.T.); +#120079 = EDGE_CURVE('',#120072,#120080,#120082,.T.); +#120080 = VERTEX_POINT('',#120081); +#120081 = CARTESIAN_POINT('',(6.575,-6.075,-10.7553)); +#120082 = LINE('',#120083,#120084); +#120083 = CARTESIAN_POINT('',(6.575,-6.075,-5.8208)); +#120084 = VECTOR('',#120085,1.); +#120085 = DIRECTION('',(0.,0.,-1.)); +#120086 = ORIENTED_EDGE('',*,*,#120087,.T.); +#120087 = EDGE_CURVE('',#120080,#120088,#120090,.T.); +#120088 = VERTEX_POINT('',#120089); +#120089 = CARTESIAN_POINT('',(5.975,-6.075,-10.7553)); +#120090 = LINE('',#120091,#120092); +#120091 = CARTESIAN_POINT('',(6.575,-6.075,-10.7553)); +#120092 = VECTOR('',#120093,1.); +#120093 = DIRECTION('',(-1.,0.,0.)); +#120094 = ORIENTED_EDGE('',*,*,#120095,.T.); +#120095 = EDGE_CURVE('',#120088,#120096,#120098,.T.); +#120096 = VERTEX_POINT('',#120097); +#120097 = CARTESIAN_POINT('',(5.775,-6.075,-10.9553)); +#120098 = CIRCLE('',#120099,0.2); +#120099 = AXIS2_PLACEMENT_3D('',#120100,#120101,#120102); +#120100 = CARTESIAN_POINT('',(5.975,-6.075,-10.9553)); +#120101 = DIRECTION('',(0.,-1.,0.)); +#120102 = DIRECTION('',(0.,0.,1.)); +#120103 = ORIENTED_EDGE('',*,*,#120104,.T.); +#120104 = EDGE_CURVE('',#120096,#120105,#120107,.T.); +#120105 = VERTEX_POINT('',#120106); +#120106 = CARTESIAN_POINT('',(5.775,-6.075,-10.7553)); +#120107 = LINE('',#120108,#120109); +#120108 = CARTESIAN_POINT('',(5.775,-6.075,-10.9553)); +#120109 = VECTOR('',#120110,1.); +#120110 = DIRECTION('',(0.,0.,1.)); +#120111 = ORIENTED_EDGE('',*,*,#120112,.T.); +#120112 = EDGE_CURVE('',#120105,#120113,#120115,.T.); +#120113 = VERTEX_POINT('',#120114); +#120114 = CARTESIAN_POINT('',(4.575,-6.075,-10.7553)); +#120115 = LINE('',#120116,#120117); +#120116 = CARTESIAN_POINT('',(5.775,-6.075,-10.7553)); +#120117 = VECTOR('',#120118,1.); +#120118 = DIRECTION('',(-1.,0.,0.)); +#120119 = ORIENTED_EDGE('',*,*,#120120,.F.); +#120120 = EDGE_CURVE('',#120121,#120113,#120123,.T.); +#120121 = VERTEX_POINT('',#120122); +#120122 = CARTESIAN_POINT('',(4.575,-6.075,-9.281273756922)); +#120123 = LINE('',#120124,#120125); +#120124 = CARTESIAN_POINT('',(4.575,-6.075,-9.281273756922)); +#120125 = VECTOR('',#120126,1.); +#120126 = DIRECTION('',(0.,0.,-1.)); +#120127 = ORIENTED_EDGE('',*,*,#120128,.F.); +#120128 = EDGE_CURVE('',#119775,#120121,#120129,.T.); +#120129 = LINE('',#120130,#120131); +#120130 = CARTESIAN_POINT('',(4.35,-6.075,-9.281273756922)); +#120131 = VECTOR('',#120132,1.); +#120132 = DIRECTION('',(1.,0.,0.)); +#120133 = ORIENTED_EDGE('',*,*,#119774,.T.); +#120134 = ORIENTED_EDGE('',*,*,#119805,.T.); +#120135 = ORIENTED_EDGE('',*,*,#119829,.T.); +#120136 = PLANE('',#120137); +#120137 = AXIS2_PLACEMENT_3D('',#120138,#120139,#120140); +#120138 = CARTESIAN_POINT('',(0.,-6.075,0.)); +#120139 = DIRECTION('',(-0.,1.,0.)); +#120140 = DIRECTION('',(1.,0.,0.)); +#120141 = ADVANCED_FACE('',(#120142),#120153,.T.); +#120142 = FACE_BOUND('',#120143,.T.); +#120143 = EDGE_LOOP('',(#120144,#120145,#120151,#120152)); +#120144 = ORIENTED_EDGE('',*,*,#120128,.T.); +#120145 = ORIENTED_EDGE('',*,*,#120146,.F.); +#120146 = EDGE_CURVE('',#119548,#120121,#120147,.T.); +#120147 = LINE('',#120148,#120149); +#120148 = CARTESIAN_POINT('',(4.575,-6.575,-9.281273756922)); +#120149 = VECTOR('',#120150,1.); +#120150 = DIRECTION('',(0.,1.,0.)); +#120151 = ORIENTED_EDGE('',*,*,#119545,.F.); +#120152 = ORIENTED_EDGE('',*,*,#119784,.F.); +#120153 = PLANE('',#120154); +#120154 = AXIS2_PLACEMENT_3D('',#120155,#120156,#120157); +#120155 = CARTESIAN_POINT('',(3.375,-6.575,-9.281273756922)); +#120156 = DIRECTION('',(0.,0.,-1.)); +#120157 = DIRECTION('',(0.,-1.,0.)); +#120158 = ADVANCED_FACE('',(#120159),#120195,.F.); +#120159 = FACE_BOUND('',#120160,.T.); +#120160 = EDGE_LOOP('',(#120161,#120171,#120178,#120179,#120180,#120181, + #120189)); +#120161 = ORIENTED_EDGE('',*,*,#120162,.T.); +#120162 = EDGE_CURVE('',#120163,#120165,#120167,.T.); +#120163 = VERTEX_POINT('',#120164); +#120164 = CARTESIAN_POINT('',(4.575,-5.275,-11.2553)); +#120165 = VERTEX_POINT('',#120166); +#120166 = CARTESIAN_POINT('',(4.575,-6.075,-11.2553)); +#120167 = LINE('',#120168,#120169); +#120168 = CARTESIAN_POINT('',(4.575,-5.275,-11.2553)); +#120169 = VECTOR('',#120170,1.); +#120170 = DIRECTION('',(0.,-1.,0.)); +#120171 = ORIENTED_EDGE('',*,*,#120172,.T.); +#120172 = EDGE_CURVE('',#120165,#119556,#120173,.T.); +#120173 = CIRCLE('',#120174,0.5); +#120174 = AXIS2_PLACEMENT_3D('',#120175,#120176,#120177); +#120175 = CARTESIAN_POINT('',(4.575,-6.075,-10.7553)); +#120176 = DIRECTION('',(-1.,0.,0.)); +#120177 = DIRECTION('',(0.,0.,-1.)); +#120178 = ORIENTED_EDGE('',*,*,#119555,.F.); +#120179 = ORIENTED_EDGE('',*,*,#120146,.T.); +#120180 = ORIENTED_EDGE('',*,*,#120120,.T.); +#120181 = ORIENTED_EDGE('',*,*,#120182,.F.); +#120182 = EDGE_CURVE('',#120183,#120113,#120185,.T.); +#120183 = VERTEX_POINT('',#120184); +#120184 = CARTESIAN_POINT('',(4.575,-5.275,-10.7553)); +#120185 = LINE('',#120186,#120187); +#120186 = CARTESIAN_POINT('',(4.575,-5.275,-10.7553)); +#120187 = VECTOR('',#120188,1.); +#120188 = DIRECTION('',(0.,-1.,0.)); +#120189 = ORIENTED_EDGE('',*,*,#120190,.T.); +#120190 = EDGE_CURVE('',#120183,#120163,#120191,.T.); +#120191 = LINE('',#120192,#120193); +#120192 = CARTESIAN_POINT('',(4.575,-5.275,-10.7553)); +#120193 = VECTOR('',#120194,1.); +#120194 = DIRECTION('',(0.,0.,-1.)); +#120195 = PLANE('',#120196); +#120196 = AXIS2_PLACEMENT_3D('',#120197,#120198,#120199); +#120197 = CARTESIAN_POINT('',(4.575,-4.975,-10.7553)); +#120198 = DIRECTION('',(1.,0.,0.)); +#120199 = DIRECTION('',(-0.,1.,0.)); +#120200 = ADVANCED_FACE('',(#120201),#120228,.T.); +#120201 = FACE_BOUND('',#120202,.T.); +#120202 = EDGE_LOOP('',(#120203,#120204,#120213,#120221)); +#120203 = ORIENTED_EDGE('',*,*,#120190,.F.); +#120204 = ORIENTED_EDGE('',*,*,#120205,.F.); +#120205 = EDGE_CURVE('',#120206,#120183,#120208,.T.); +#120206 = VERTEX_POINT('',#120207); +#120207 = CARTESIAN_POINT('',(4.875,-4.975,-10.7553)); +#120208 = CIRCLE('',#120209,0.3); +#120209 = AXIS2_PLACEMENT_3D('',#120210,#120211,#120212); +#120210 = CARTESIAN_POINT('',(4.875,-5.275,-10.7553)); +#120211 = DIRECTION('',(0.,-0.,1.)); +#120212 = DIRECTION('',(0.,1.,0.)); +#120213 = ORIENTED_EDGE('',*,*,#120214,.T.); +#120214 = EDGE_CURVE('',#120206,#120215,#120217,.T.); +#120215 = VERTEX_POINT('',#120216); +#120216 = CARTESIAN_POINT('',(4.875,-4.975,-11.2553)); +#120217 = LINE('',#120218,#120219); +#120218 = CARTESIAN_POINT('',(4.875,-4.975,-10.7553)); +#120219 = VECTOR('',#120220,1.); +#120220 = DIRECTION('',(0.,0.,-1.)); +#120221 = ORIENTED_EDGE('',*,*,#120222,.F.); +#120222 = EDGE_CURVE('',#120163,#120215,#120223,.T.); +#120223 = CIRCLE('',#120224,0.3); +#120224 = AXIS2_PLACEMENT_3D('',#120225,#120226,#120227); +#120225 = CARTESIAN_POINT('',(4.875,-5.275,-11.2553)); +#120226 = DIRECTION('',(0.,0.,-1.)); +#120227 = DIRECTION('',(-1.,0.,0.)); +#120228 = CYLINDRICAL_SURFACE('',#120229,0.3); +#120229 = AXIS2_PLACEMENT_3D('',#120230,#120231,#120232); +#120230 = CARTESIAN_POINT('',(4.875,-5.275,18.48968)); +#120231 = DIRECTION('',(0.,0.,-1.)); +#120232 = DIRECTION('',(-1.,0.,0.)); +#120233 = ADVANCED_FACE('',(#120234),#120269,.F.); +#120234 = FACE_BOUND('',#120235,.T.); +#120235 = EDGE_LOOP('',(#120236,#120244,#120253,#120261,#120267,#120268) + ); +#120236 = ORIENTED_EDGE('',*,*,#120237,.F.); +#120237 = EDGE_CURVE('',#120238,#120215,#120240,.T.); +#120238 = VERTEX_POINT('',#120239); +#120239 = CARTESIAN_POINT('',(5.475,-4.975,-11.2553)); +#120240 = LINE('',#120241,#120242); +#120241 = CARTESIAN_POINT('',(5.475,-4.975,-11.2553)); +#120242 = VECTOR('',#120243,1.); +#120243 = DIRECTION('',(-1.,0.,0.)); +#120244 = ORIENTED_EDGE('',*,*,#120245,.T.); +#120245 = EDGE_CURVE('',#120238,#120246,#120248,.T.); +#120246 = VERTEX_POINT('',#120247); +#120247 = CARTESIAN_POINT('',(5.775,-5.275,-11.2553)); +#120248 = CIRCLE('',#120249,0.3); +#120249 = AXIS2_PLACEMENT_3D('',#120250,#120251,#120252); +#120250 = CARTESIAN_POINT('',(5.475,-5.275,-11.2553)); +#120251 = DIRECTION('',(0.,0.,-1.)); +#120252 = DIRECTION('',(0.,1.,0.)); +#120253 = ORIENTED_EDGE('',*,*,#120254,.F.); +#120254 = EDGE_CURVE('',#120255,#120246,#120257,.T.); +#120255 = VERTEX_POINT('',#120256); +#120256 = CARTESIAN_POINT('',(5.775,-6.075,-11.2553)); +#120257 = LINE('',#120258,#120259); +#120258 = CARTESIAN_POINT('',(5.775,-6.075,-11.2553)); +#120259 = VECTOR('',#120260,1.); +#120260 = DIRECTION('',(0.,1.,0.)); +#120261 = ORIENTED_EDGE('',*,*,#120262,.T.); +#120262 = EDGE_CURVE('',#120255,#120165,#120263,.T.); +#120263 = LINE('',#120264,#120265); +#120264 = CARTESIAN_POINT('',(5.775,-6.075,-11.2553)); +#120265 = VECTOR('',#120266,1.); +#120266 = DIRECTION('',(-1.,0.,0.)); +#120267 = ORIENTED_EDGE('',*,*,#120162,.F.); +#120268 = ORIENTED_EDGE('',*,*,#120222,.T.); +#120269 = PLANE('',#120270); +#120270 = AXIS2_PLACEMENT_3D('',#120271,#120272,#120273); +#120271 = CARTESIAN_POINT('',(0.,-6.075,-11.2553)); +#120272 = DIRECTION('',(0.,0.,1.)); +#120273 = DIRECTION('',(1.,0.,-0.)); +#120274 = ADVANCED_FACE('',(#120275),#120327,.F.); +#120275 = FACE_BOUND('',#120276,.T.); +#120276 = EDGE_LOOP('',(#120277,#120287,#120295,#120303,#120312,#120320) + ); +#120277 = ORIENTED_EDGE('',*,*,#120278,.F.); +#120278 = EDGE_CURVE('',#120279,#120281,#120283,.T.); +#120279 = VERTEX_POINT('',#120280); +#120280 = CARTESIAN_POINT('',(-4.575,-6.075,-11.2553)); +#120281 = VERTEX_POINT('',#120282); +#120282 = CARTESIAN_POINT('',(-4.575,-5.275,-11.2553)); +#120283 = LINE('',#120284,#120285); +#120284 = CARTESIAN_POINT('',(-4.575,-6.075,-11.2553)); +#120285 = VECTOR('',#120286,1.); +#120286 = DIRECTION('',(0.,1.,0.)); +#120287 = ORIENTED_EDGE('',*,*,#120288,.T.); +#120288 = EDGE_CURVE('',#120279,#120289,#120291,.T.); +#120289 = VERTEX_POINT('',#120290); +#120290 = CARTESIAN_POINT('',(-5.775,-6.075,-11.2553)); +#120291 = LINE('',#120292,#120293); +#120292 = CARTESIAN_POINT('',(-4.575,-6.075,-11.2553)); +#120293 = VECTOR('',#120294,1.); +#120294 = DIRECTION('',(-1.,0.,0.)); +#120295 = ORIENTED_EDGE('',*,*,#120296,.F.); +#120296 = EDGE_CURVE('',#120297,#120289,#120299,.T.); +#120297 = VERTEX_POINT('',#120298); +#120298 = CARTESIAN_POINT('',(-5.775,-5.275,-11.2553)); +#120299 = LINE('',#120300,#120301); +#120300 = CARTESIAN_POINT('',(-5.775,-5.275,-11.2553)); +#120301 = VECTOR('',#120302,1.); +#120302 = DIRECTION('',(0.,-1.,0.)); +#120303 = ORIENTED_EDGE('',*,*,#120304,.T.); +#120304 = EDGE_CURVE('',#120297,#120305,#120307,.T.); +#120305 = VERTEX_POINT('',#120306); +#120306 = CARTESIAN_POINT('',(-5.475,-4.975,-11.2553)); +#120307 = CIRCLE('',#120308,0.3); +#120308 = AXIS2_PLACEMENT_3D('',#120309,#120310,#120311); +#120309 = CARTESIAN_POINT('',(-5.475,-5.275,-11.2553)); +#120310 = DIRECTION('',(0.,0.,-1.)); +#120311 = DIRECTION('',(-1.,0.,0.)); +#120312 = ORIENTED_EDGE('',*,*,#120313,.F.); +#120313 = EDGE_CURVE('',#120314,#120305,#120316,.T.); +#120314 = VERTEX_POINT('',#120315); +#120315 = CARTESIAN_POINT('',(-4.875,-4.975,-11.2553)); +#120316 = LINE('',#120317,#120318); +#120317 = CARTESIAN_POINT('',(-4.875,-4.975,-11.2553)); +#120318 = VECTOR('',#120319,1.); +#120319 = DIRECTION('',(-1.,0.,0.)); +#120320 = ORIENTED_EDGE('',*,*,#120321,.T.); +#120321 = EDGE_CURVE('',#120314,#120281,#120322,.T.); +#120322 = CIRCLE('',#120323,0.3); +#120323 = AXIS2_PLACEMENT_3D('',#120324,#120325,#120326); +#120324 = CARTESIAN_POINT('',(-4.875,-5.275,-11.2553)); +#120325 = DIRECTION('',(0.,0.,-1.)); +#120326 = DIRECTION('',(0.,1.,0.)); +#120327 = PLANE('',#120328); +#120328 = AXIS2_PLACEMENT_3D('',#120329,#120330,#120331); +#120329 = CARTESIAN_POINT('',(0.,-6.075,-11.2553)); +#120330 = DIRECTION('',(0.,0.,1.)); +#120331 = DIRECTION('',(1.,0.,-0.)); +#120332 = ADVANCED_FACE('',(#120333),#120356,.T.); +#120333 = FACE_BOUND('',#120334,.T.); +#120334 = EDGE_LOOP('',(#120335,#120336,#120337,#120346,#120355)); +#120335 = ORIENTED_EDGE('',*,*,#120172,.F.); +#120336 = ORIENTED_EDGE('',*,*,#120262,.F.); +#120337 = ORIENTED_EDGE('',*,*,#120338,.F.); +#120338 = EDGE_CURVE('',#120339,#120255,#120341,.T.); +#120339 = VERTEX_POINT('',#120340); +#120340 = CARTESIAN_POINT('',(5.775,-6.533257569496,-10.9553)); +#120341 = CIRCLE('',#120342,0.5); +#120342 = AXIS2_PLACEMENT_3D('',#120343,#120344,#120345); +#120343 = CARTESIAN_POINT('',(5.775,-6.075,-10.7553)); +#120344 = DIRECTION('',(1.,0.,0.)); +#120345 = DIRECTION('',(0.,-0.916515138991,-0.4)); +#120346 = ORIENTED_EDGE('',*,*,#120347,.T.); +#120347 = EDGE_CURVE('',#120339,#119564,#120348,.T.); +#120348 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#120349,#120350,#120351, + #120352,#120353,#120354),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#120349 = CARTESIAN_POINT('',(5.775,-6.533257569496,-10.9553)); +#120350 = CARTESIAN_POINT('',(5.775,-6.556246856153,-10.90262492685)); +#120351 = CARTESIAN_POINT('',(5.796470602345,-6.567170846277, + -10.8509975903)); +#120352 = CARTESIAN_POINT('',(5.870402974125,-6.575920913949, + -10.77694275131)); +#120353 = CARTESIAN_POINT('',(5.920988249926,-6.575,-10.75554333853)); +#120354 = CARTESIAN_POINT('',(5.975,-6.575,-10.7553)); +#120355 = ORIENTED_EDGE('',*,*,#119563,.F.); +#120356 = CYLINDRICAL_SURFACE('',#120357,0.5); +#120357 = AXIS2_PLACEMENT_3D('',#120358,#120359,#120360); +#120358 = CARTESIAN_POINT('',(23.71734,-6.075,-10.7553)); +#120359 = DIRECTION('',(-1.,0.,0.)); +#120360 = DIRECTION('',(0.,0.,-1.)); +#120361 = ADVANCED_FACE('',(#120362),#120378,.F.); +#120362 = FACE_BOUND('',#120363,.F.); +#120363 = EDGE_LOOP('',(#120364,#120370,#120371,#120377)); +#120364 = ORIENTED_EDGE('',*,*,#120365,.F.); +#120365 = EDGE_CURVE('',#120088,#119564,#120366,.T.); +#120366 = LINE('',#120367,#120368); +#120367 = CARTESIAN_POINT('',(5.975,-6.075,-10.7553)); +#120368 = VECTOR('',#120369,1.); +#120369 = DIRECTION('',(0.,-1.,0.)); +#120370 = ORIENTED_EDGE('',*,*,#120095,.T.); +#120371 = ORIENTED_EDGE('',*,*,#120372,.T.); +#120372 = EDGE_CURVE('',#120096,#120339,#120373,.T.); +#120373 = LINE('',#120374,#120375); +#120374 = CARTESIAN_POINT('',(5.775,-6.075,-10.9553)); +#120375 = VECTOR('',#120376,1.); +#120376 = DIRECTION('',(0.,-1.,1.162898525401E-14)); +#120377 = ORIENTED_EDGE('',*,*,#120347,.T.); +#120378 = CYLINDRICAL_SURFACE('',#120379,0.2); +#120379 = AXIS2_PLACEMENT_3D('',#120380,#120381,#120382); +#120380 = CARTESIAN_POINT('',(5.975,23.71768618537,-10.9553)); +#120381 = DIRECTION('',(0.,-1.,0.)); +#120382 = DIRECTION('',(0.,0.,1.)); +#120383 = ADVANCED_FACE('',(#120384),#120395,.F.); +#120384 = FACE_BOUND('',#120385,.T.); +#120385 = EDGE_LOOP('',(#120386,#120387,#120393,#120394)); +#120386 = ORIENTED_EDGE('',*,*,#120087,.F.); +#120387 = ORIENTED_EDGE('',*,*,#120388,.F.); +#120388 = EDGE_CURVE('',#119572,#120080,#120389,.T.); +#120389 = LINE('',#120390,#120391); +#120390 = CARTESIAN_POINT('',(6.575,-6.575,-10.7553)); +#120391 = VECTOR('',#120392,1.); +#120392 = DIRECTION('',(0.,1.,0.)); +#120393 = ORIENTED_EDGE('',*,*,#119571,.T.); +#120394 = ORIENTED_EDGE('',*,*,#120365,.F.); +#120395 = PLANE('',#120396); +#120396 = AXIS2_PLACEMENT_3D('',#120397,#120398,#120399); +#120397 = CARTESIAN_POINT('',(6.575,-6.575,-10.7553)); +#120398 = DIRECTION('',(0.,0.,1.)); +#120399 = DIRECTION('',(1.,0.,-0.)); +#120400 = ADVANCED_FACE('',(#120401),#120417,.F.); +#120401 = FACE_BOUND('',#120402,.T.); +#120402 = EDGE_LOOP('',(#120403,#120404,#120410,#120411)); +#120403 = ORIENTED_EDGE('',*,*,#119696,.T.); +#120404 = ORIENTED_EDGE('',*,*,#120405,.T.); +#120405 = EDGE_CURVE('',#119689,#119945,#120406,.T.); +#120406 = LINE('',#120407,#120408); +#120407 = CARTESIAN_POINT('',(-6.575,-6.575,-10.7553)); +#120408 = VECTOR('',#120409,1.); +#120409 = DIRECTION('',(0.,1.,0.)); +#120410 = ORIENTED_EDGE('',*,*,#119944,.F.); +#120411 = ORIENTED_EDGE('',*,*,#120412,.F.); +#120412 = EDGE_CURVE('',#119697,#119936,#120413,.T.); +#120413 = LINE('',#120414,#120415); +#120414 = CARTESIAN_POINT('',(-5.975,-6.575,-10.7553)); +#120415 = VECTOR('',#120416,1.); +#120416 = DIRECTION('',(0.,1.,0.)); +#120417 = PLANE('',#120418); +#120418 = AXIS2_PLACEMENT_3D('',#120419,#120420,#120421); +#120419 = CARTESIAN_POINT('',(6.575,-6.575,-10.7553)); +#120420 = DIRECTION('',(0.,0.,1.)); +#120421 = DIRECTION('',(1.,0.,-0.)); +#120422 = ADVANCED_FACE('',(#120423),#120434,.F.); +#120423 = FACE_BOUND('',#120424,.T.); +#120424 = EDGE_LOOP('',(#120425,#120426,#120427,#120433)); +#120425 = ORIENTED_EDGE('',*,*,#120388,.T.); +#120426 = ORIENTED_EDGE('',*,*,#120079,.F.); +#120427 = ORIENTED_EDGE('',*,*,#120428,.F.); +#120428 = EDGE_CURVE('',#119580,#120072,#120429,.T.); +#120429 = LINE('',#120430,#120431); +#120430 = CARTESIAN_POINT('',(6.575,-6.575,-5.8208)); +#120431 = VECTOR('',#120432,1.); +#120432 = DIRECTION('',(0.,1.,0.)); +#120433 = ORIENTED_EDGE('',*,*,#119579,.T.); +#120434 = PLANE('',#120435); +#120435 = AXIS2_PLACEMENT_3D('',#120436,#120437,#120438); +#120436 = CARTESIAN_POINT('',(6.575,-6.575,-5.8208)); +#120437 = DIRECTION('',(-1.,0.,0.)); +#120438 = DIRECTION('',(0.,0.,1.)); +#120439 = ADVANCED_FACE('',(#120440),#120451,.F.); +#120440 = FACE_BOUND('',#120441,.T.); +#120441 = EDGE_LOOP('',(#120442,#120443,#120444,#120450)); +#120442 = ORIENTED_EDGE('',*,*,#120428,.T.); +#120443 = ORIENTED_EDGE('',*,*,#120071,.F.); +#120444 = ORIENTED_EDGE('',*,*,#120445,.F.); +#120445 = EDGE_CURVE('',#119588,#120064,#120446,.T.); +#120446 = LINE('',#120447,#120448); +#120447 = CARTESIAN_POINT('',(5.975,-6.575,-5.8208)); +#120448 = VECTOR('',#120449,1.); +#120449 = DIRECTION('',(0.,1.,0.)); +#120450 = ORIENTED_EDGE('',*,*,#119587,.T.); +#120451 = PLANE('',#120452); +#120452 = AXIS2_PLACEMENT_3D('',#120453,#120454,#120455); +#120453 = CARTESIAN_POINT('',(5.975,-6.575,-5.8208)); +#120454 = DIRECTION('',(0.,0.,-1.)); +#120455 = DIRECTION('',(0.,-1.,0.)); +#120456 = ADVANCED_FACE('',(#120457),#120468,.F.); +#120457 = FACE_BOUND('',#120458,.T.); +#120458 = EDGE_LOOP('',(#120459,#120460,#120461,#120467)); +#120459 = ORIENTED_EDGE('',*,*,#120445,.T.); +#120460 = ORIENTED_EDGE('',*,*,#120063,.F.); +#120461 = ORIENTED_EDGE('',*,*,#120462,.F.); +#120462 = EDGE_CURVE('',#119596,#120056,#120463,.T.); +#120463 = LINE('',#120464,#120465); +#120464 = CARTESIAN_POINT('',(5.975,-6.575,-1.2)); +#120465 = VECTOR('',#120466,1.); +#120466 = DIRECTION('',(0.,1.,0.)); +#120467 = ORIENTED_EDGE('',*,*,#119595,.T.); +#120468 = PLANE('',#120469); +#120469 = AXIS2_PLACEMENT_3D('',#120470,#120471,#120472); +#120470 = CARTESIAN_POINT('',(5.975,-6.575,-1.2)); +#120471 = DIRECTION('',(-1.,0.,0.)); +#120472 = DIRECTION('',(0.,0.,1.)); +#120473 = ADVANCED_FACE('',(#120474),#120485,.F.); +#120474 = FACE_BOUND('',#120475,.T.); +#120475 = EDGE_LOOP('',(#120476,#120477,#120478,#120479)); +#120476 = ORIENTED_EDGE('',*,*,#119603,.T.); +#120477 = ORIENTED_EDGE('',*,*,#120462,.T.); +#120478 = ORIENTED_EDGE('',*,*,#120055,.F.); +#120479 = ORIENTED_EDGE('',*,*,#120480,.F.); +#120480 = EDGE_CURVE('',#119604,#120047,#120481,.T.); +#120481 = LINE('',#120482,#120483); +#120482 = CARTESIAN_POINT('',(5.609475380552,-6.575,-0.377569606242)); +#120483 = VECTOR('',#120484,1.); +#120484 = DIRECTION('',(0.,1.,0.)); +#120485 = PLANE('',#120486); +#120486 = AXIS2_PLACEMENT_3D('',#120487,#120488,#120489); +#120487 = CARTESIAN_POINT('',(5.575,-6.575,-0.3)); +#120488 = DIRECTION('',(-0.91381154862,0.,-0.406138466053)); +#120489 = DIRECTION('',(-0.406138466053,0.,0.91381154862)); +#120490 = ADVANCED_FACE('',(#120491),#120502,.F.); +#120491 = FACE_BOUND('',#120492,.F.); +#120492 = EDGE_LOOP('',(#120493,#120494,#120495,#120501)); +#120493 = ORIENTED_EDGE('',*,*,#120480,.F.); +#120494 = ORIENTED_EDGE('',*,*,#119611,.T.); +#120495 = ORIENTED_EDGE('',*,*,#120496,.T.); +#120496 = EDGE_CURVE('',#119612,#120039,#120497,.T.); +#120497 = LINE('',#120498,#120499); +#120498 = CARTESIAN_POINT('',(5.575,-6.575,-0.21511421982)); +#120499 = VECTOR('',#120500,1.); +#120500 = DIRECTION('',(0.,1.,0.)); +#120501 = ORIENTED_EDGE('',*,*,#120046,.T.); +#120502 = CYLINDRICAL_SURFACE('',#120503,0.4); +#120503 = AXIS2_PLACEMENT_3D('',#120504,#120505,#120506); +#120504 = CARTESIAN_POINT('',(5.975,-23.71788209056,-0.21511421982)); +#120505 = DIRECTION('',(0.,1.,0.)); +#120506 = DIRECTION('',(-0.91381154862,0.,-0.406138466053)); +#120507 = ADVANCED_FACE('',(#120508),#120514,.F.); +#120508 = FACE_BOUND('',#120509,.T.); +#120509 = EDGE_LOOP('',(#120510,#120511,#120512,#120513)); +#120510 = ORIENTED_EDGE('',*,*,#120038,.F.); +#120511 = ORIENTED_EDGE('',*,*,#105104,.F.); +#120512 = ORIENTED_EDGE('',*,*,#119620,.T.); +#120513 = ORIENTED_EDGE('',*,*,#120496,.T.); +#120514 = PLANE('',#120515); +#120515 = AXIS2_PLACEMENT_3D('',#120516,#120517,#120518); +#120516 = CARTESIAN_POINT('',(5.575,-6.575,0.5)); +#120517 = DIRECTION('',(-1.,0.,0.)); +#120518 = DIRECTION('',(0.,0.,1.)); +#120519 = ADVANCED_FACE('',(#120520),#120541,.F.); +#120520 = FACE_BOUND('',#120521,.F.); +#120521 = EDGE_LOOP('',(#120522,#120523,#120534,#120540)); +#120522 = ORIENTED_EDGE('',*,*,#120412,.F.); +#120523 = ORIENTED_EDGE('',*,*,#120524,.T.); +#120524 = EDGE_CURVE('',#119697,#120525,#120527,.T.); +#120525 = VERTEX_POINT('',#120526); +#120526 = CARTESIAN_POINT('',(-5.775,-6.533257569496,-10.9553)); +#120527 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#120528,#120529,#120530, + #120531,#120532,#120533),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#120528 = CARTESIAN_POINT('',(-5.975,-6.575,-10.7553)); +#120529 = CARTESIAN_POINT('',(-5.921009907841,-6.575,-10.75554324095)); +#120530 = CARTESIAN_POINT('',(-5.870773853702,-6.575963388133, + -10.77658327764)); +#120531 = CARTESIAN_POINT('',(-5.796099722768,-6.567128372093, + -10.85135706397)); +#120532 = CARTESIAN_POINT('',(-5.775,-6.556256070477,-10.90260381419)); +#120533 = CARTESIAN_POINT('',(-5.775,-6.533257569496,-10.9553)); +#120534 = ORIENTED_EDGE('',*,*,#120535,.T.); +#120535 = EDGE_CURVE('',#120525,#119928,#120536,.T.); +#120536 = LINE('',#120537,#120538); +#120537 = CARTESIAN_POINT('',(-5.775,-6.533257569496,-10.9553)); +#120538 = VECTOR('',#120539,1.); +#120539 = DIRECTION('',(0.,1.,-1.162898525401E-14)); +#120540 = ORIENTED_EDGE('',*,*,#119935,.T.); +#120541 = CYLINDRICAL_SURFACE('',#120542,0.2); +#120542 = AXIS2_PLACEMENT_3D('',#120543,#120544,#120545); +#120543 = CARTESIAN_POINT('',(-5.975,-23.71753590521,-10.9553)); +#120544 = DIRECTION('',(0.,1.,0.)); +#120545 = DIRECTION('',(0.,-0.,1.)); +#120546 = ADVANCED_FACE('',(#120547),#120566,.T.); +#120547 = FACE_BOUND('',#120548,.T.); +#120548 = EDGE_LOOP('',(#120549,#120550,#120557,#120558,#120559)); +#120549 = ORIENTED_EDGE('',*,*,#120288,.F.); +#120550 = ORIENTED_EDGE('',*,*,#120551,.F.); +#120551 = EDGE_CURVE('',#119705,#120279,#120552,.T.); +#120552 = CIRCLE('',#120553,0.5); +#120553 = AXIS2_PLACEMENT_3D('',#120554,#120555,#120556); +#120554 = CARTESIAN_POINT('',(-4.575,-6.075,-10.7553)); +#120555 = DIRECTION('',(1.,0.,0.)); +#120556 = DIRECTION('',(0.,-1.,0.)); +#120557 = ORIENTED_EDGE('',*,*,#119704,.F.); +#120558 = ORIENTED_EDGE('',*,*,#120524,.T.); +#120559 = ORIENTED_EDGE('',*,*,#120560,.F.); +#120560 = EDGE_CURVE('',#120289,#120525,#120561,.T.); +#120561 = CIRCLE('',#120562,0.5); +#120562 = AXIS2_PLACEMENT_3D('',#120563,#120564,#120565); +#120563 = CARTESIAN_POINT('',(-5.775,-6.075,-10.7553)); +#120564 = DIRECTION('',(-1.,0.,0.)); +#120565 = DIRECTION('',(0.,0.,-1.)); +#120566 = CYLINDRICAL_SURFACE('',#120567,0.5); +#120567 = AXIS2_PLACEMENT_3D('',#120568,#120569,#120570); +#120568 = CARTESIAN_POINT('',(23.71734,-6.075,-10.7553)); +#120569 = DIRECTION('',(-1.,0.,0.)); +#120570 = DIRECTION('',(0.,0.,-1.)); +#120571 = ADVANCED_FACE('',(#120572),#120592,.F.); +#120572 = FACE_BOUND('',#120573,.T.); +#120573 = EDGE_LOOP('',(#120574,#120575,#120576,#120577,#120578,#120586) + ); +#120574 = ORIENTED_EDGE('',*,*,#120296,.T.); +#120575 = ORIENTED_EDGE('',*,*,#120560,.T.); +#120576 = ORIENTED_EDGE('',*,*,#120535,.T.); +#120577 = ORIENTED_EDGE('',*,*,#119927,.T.); +#120578 = ORIENTED_EDGE('',*,*,#120579,.F.); +#120579 = EDGE_CURVE('',#120580,#119920,#120582,.T.); +#120580 = VERTEX_POINT('',#120581); +#120581 = CARTESIAN_POINT('',(-5.775,-5.275,-10.7553)); +#120582 = LINE('',#120583,#120584); +#120583 = CARTESIAN_POINT('',(-5.775,-5.275,-10.7553)); +#120584 = VECTOR('',#120585,1.); +#120585 = DIRECTION('',(0.,-1.,0.)); +#120586 = ORIENTED_EDGE('',*,*,#120587,.T.); +#120587 = EDGE_CURVE('',#120580,#120297,#120588,.T.); +#120588 = LINE('',#120589,#120590); +#120589 = CARTESIAN_POINT('',(-5.775,-5.275,-10.7553)); +#120590 = VECTOR('',#120591,1.); +#120591 = DIRECTION('',(0.,0.,-1.)); +#120592 = PLANE('',#120593); +#120593 = AXIS2_PLACEMENT_3D('',#120594,#120595,#120596); +#120594 = CARTESIAN_POINT('',(-5.775,-4.975,-10.7553)); +#120595 = DIRECTION('',(1.,0.,0.)); +#120596 = DIRECTION('',(-0.,1.,0.)); +#120597 = ADVANCED_FACE('',(#120598),#120617,.T.); +#120598 = FACE_BOUND('',#120599,.T.); +#120599 = EDGE_LOOP('',(#120600,#120601,#120610,#120616)); +#120600 = ORIENTED_EDGE('',*,*,#120587,.F.); +#120601 = ORIENTED_EDGE('',*,*,#120602,.F.); +#120602 = EDGE_CURVE('',#120603,#120580,#120605,.T.); +#120603 = VERTEX_POINT('',#120604); +#120604 = CARTESIAN_POINT('',(-5.475,-4.975,-10.7553)); +#120605 = CIRCLE('',#120606,0.3); +#120606 = AXIS2_PLACEMENT_3D('',#120607,#120608,#120609); +#120607 = CARTESIAN_POINT('',(-5.475,-5.275,-10.7553)); +#120608 = DIRECTION('',(0.,-0.,1.)); +#120609 = DIRECTION('',(0.,1.,0.)); +#120610 = ORIENTED_EDGE('',*,*,#120611,.T.); +#120611 = EDGE_CURVE('',#120603,#120305,#120612,.T.); +#120612 = LINE('',#120613,#120614); +#120613 = CARTESIAN_POINT('',(-5.475,-4.975,-10.7553)); +#120614 = VECTOR('',#120615,1.); +#120615 = DIRECTION('',(0.,0.,-1.)); +#120616 = ORIENTED_EDGE('',*,*,#120304,.F.); +#120617 = CYLINDRICAL_SURFACE('',#120618,0.3); +#120618 = AXIS2_PLACEMENT_3D('',#120619,#120620,#120621); +#120619 = CARTESIAN_POINT('',(-5.475,-5.275,18.48968)); +#120620 = DIRECTION('',(0.,0.,-1.)); +#120621 = DIRECTION('',(-1.,0.,0.)); +#120622 = ADVANCED_FACE('',(#120623),#120641,.F.); +#120623 = FACE_BOUND('',#120624,.T.); +#120624 = EDGE_LOOP('',(#120625,#120626,#120627,#120635)); +#120625 = ORIENTED_EDGE('',*,*,#120313,.T.); +#120626 = ORIENTED_EDGE('',*,*,#120611,.F.); +#120627 = ORIENTED_EDGE('',*,*,#120628,.F.); +#120628 = EDGE_CURVE('',#120629,#120603,#120631,.T.); +#120629 = VERTEX_POINT('',#120630); +#120630 = CARTESIAN_POINT('',(-4.875,-4.975,-10.7553)); +#120631 = LINE('',#120632,#120633); +#120632 = CARTESIAN_POINT('',(-4.875,-4.975,-10.7553)); +#120633 = VECTOR('',#120634,1.); +#120634 = DIRECTION('',(-1.,0.,0.)); +#120635 = ORIENTED_EDGE('',*,*,#120636,.T.); +#120636 = EDGE_CURVE('',#120629,#120314,#120637,.T.); +#120637 = LINE('',#120638,#120639); +#120638 = CARTESIAN_POINT('',(-4.875,-4.975,-10.7553)); +#120639 = VECTOR('',#120640,1.); +#120640 = DIRECTION('',(0.,0.,-1.)); +#120641 = PLANE('',#120642); +#120642 = AXIS2_PLACEMENT_3D('',#120643,#120644,#120645); +#120643 = CARTESIAN_POINT('',(-4.575,-4.975,-10.7553)); +#120644 = DIRECTION('',(0.,-1.,0.)); +#120645 = DIRECTION('',(0.,0.,-1.)); +#120646 = ADVANCED_FACE('',(#120647),#120666,.T.); +#120647 = FACE_BOUND('',#120648,.T.); +#120648 = EDGE_LOOP('',(#120649,#120650,#120659,#120665)); +#120649 = ORIENTED_EDGE('',*,*,#120636,.F.); +#120650 = ORIENTED_EDGE('',*,*,#120651,.F.); +#120651 = EDGE_CURVE('',#120652,#120629,#120654,.T.); +#120652 = VERTEX_POINT('',#120653); +#120653 = CARTESIAN_POINT('',(-4.575,-5.275,-10.7553)); +#120654 = CIRCLE('',#120655,0.3); +#120655 = AXIS2_PLACEMENT_3D('',#120656,#120657,#120658); +#120656 = CARTESIAN_POINT('',(-4.875,-5.275,-10.7553)); +#120657 = DIRECTION('',(0.,0.,1.)); +#120658 = DIRECTION('',(1.,0.,-0.)); +#120659 = ORIENTED_EDGE('',*,*,#120660,.T.); +#120660 = EDGE_CURVE('',#120652,#120281,#120661,.T.); +#120661 = LINE('',#120662,#120663); +#120662 = CARTESIAN_POINT('',(-4.575,-5.275,-10.7553)); +#120663 = VECTOR('',#120664,1.); +#120664 = DIRECTION('',(0.,0.,-1.)); +#120665 = ORIENTED_EDGE('',*,*,#120321,.F.); +#120666 = CYLINDRICAL_SURFACE('',#120667,0.3); +#120667 = AXIS2_PLACEMENT_3D('',#120668,#120669,#120670); +#120668 = CARTESIAN_POINT('',(-4.875,-5.275,18.48968)); +#120669 = DIRECTION('',(0.,0.,-1.)); +#120670 = DIRECTION('',(0.,1.,0.)); +#120671 = ADVANCED_FACE('',(#120672),#120691,.F.); +#120672 = FACE_BOUND('',#120673,.T.); +#120673 = EDGE_LOOP('',(#120674,#120680,#120681,#120687,#120688,#120689, + #120690)); +#120674 = ORIENTED_EDGE('',*,*,#120675,.F.); +#120675 = EDGE_CURVE('',#119912,#120652,#120676,.T.); +#120676 = LINE('',#120677,#120678); +#120677 = CARTESIAN_POINT('',(-4.575,-6.075,-10.7553)); +#120678 = VECTOR('',#120679,1.); +#120679 = DIRECTION('',(0.,1.,0.)); +#120680 = ORIENTED_EDGE('',*,*,#119911,.T.); +#120681 = ORIENTED_EDGE('',*,*,#120682,.F.); +#120682 = EDGE_CURVE('',#119713,#119904,#120683,.T.); +#120683 = LINE('',#120684,#120685); +#120684 = CARTESIAN_POINT('',(-4.575,-6.575,-9.281273756922)); +#120685 = VECTOR('',#120686,1.); +#120686 = DIRECTION('',(0.,1.,0.)); +#120687 = ORIENTED_EDGE('',*,*,#119712,.F.); +#120688 = ORIENTED_EDGE('',*,*,#120551,.T.); +#120689 = ORIENTED_EDGE('',*,*,#120278,.T.); +#120690 = ORIENTED_EDGE('',*,*,#120660,.F.); +#120691 = PLANE('',#120692); +#120692 = AXIS2_PLACEMENT_3D('',#120693,#120694,#120695); +#120693 = CARTESIAN_POINT('',(-4.575,-6.575,-10.7553)); +#120694 = DIRECTION('',(-1.,0.,0.)); +#120695 = DIRECTION('',(0.,0.,1.)); +#120696 = ADVANCED_FACE('',(#120697),#120703,.T.); +#120697 = FACE_BOUND('',#120698,.T.); +#120698 = EDGE_LOOP('',(#120699,#120700,#120701,#120702)); +#120699 = ORIENTED_EDGE('',*,*,#119720,.F.); +#120700 = ORIENTED_EDGE('',*,*,#120682,.T.); +#120701 = ORIENTED_EDGE('',*,*,#119903,.T.); +#120702 = ORIENTED_EDGE('',*,*,#119878,.T.); +#120703 = PLANE('',#120704); +#120704 = AXIS2_PLACEMENT_3D('',#120705,#120706,#120707); +#120705 = CARTESIAN_POINT('',(-4.575,-6.575,-9.281273756922)); +#120706 = DIRECTION('',(0.,0.,-1.)); +#120707 = DIRECTION('',(0.,-1.,0.)); +#120708 = ADVANCED_FACE('',(#120709),#120737,.T.); +#120709 = FACE_BOUND('',#120710,.T.); +#120710 = EDGE_LOOP('',(#120711,#120712,#120713,#120721,#120730,#120736) + ); +#120711 = ORIENTED_EDGE('',*,*,#120182,.T.); +#120712 = ORIENTED_EDGE('',*,*,#120112,.F.); +#120713 = ORIENTED_EDGE('',*,*,#120714,.T.); +#120714 = EDGE_CURVE('',#120105,#120715,#120717,.T.); +#120715 = VERTEX_POINT('',#120716); +#120716 = CARTESIAN_POINT('',(5.775,-5.275,-10.7553)); +#120717 = LINE('',#120718,#120719); +#120718 = CARTESIAN_POINT('',(5.775,-6.075,-10.7553)); +#120719 = VECTOR('',#120720,1.); +#120720 = DIRECTION('',(0.,1.,0.)); +#120721 = ORIENTED_EDGE('',*,*,#120722,.T.); +#120722 = EDGE_CURVE('',#120715,#120723,#120725,.T.); +#120723 = VERTEX_POINT('',#120724); +#120724 = CARTESIAN_POINT('',(5.475,-4.975,-10.7553)); +#120725 = CIRCLE('',#120726,0.3); +#120726 = AXIS2_PLACEMENT_3D('',#120727,#120728,#120729); +#120727 = CARTESIAN_POINT('',(5.475,-5.275,-10.7553)); +#120728 = DIRECTION('',(0.,0.,1.)); +#120729 = DIRECTION('',(1.,0.,-0.)); +#120730 = ORIENTED_EDGE('',*,*,#120731,.T.); +#120731 = EDGE_CURVE('',#120723,#120206,#120732,.T.); +#120732 = LINE('',#120733,#120734); +#120733 = CARTESIAN_POINT('',(5.475,-4.975,-10.7553)); +#120734 = VECTOR('',#120735,1.); +#120735 = DIRECTION('',(-1.,0.,0.)); +#120736 = ORIENTED_EDGE('',*,*,#120205,.T.); +#120737 = PLANE('',#120738); +#120738 = AXIS2_PLACEMENT_3D('',#120739,#120740,#120741); +#120739 = CARTESIAN_POINT('',(0.,-6.075,-10.7553)); +#120740 = DIRECTION('',(0.,0.,1.)); +#120741 = DIRECTION('',(1.,0.,-0.)); +#120742 = ADVANCED_FACE('',(#120743),#120751,.T.); +#120743 = FACE_BOUND('',#120744,.T.); +#120744 = EDGE_LOOP('',(#120745,#120746,#120747,#120748,#120749,#120750) + ); +#120745 = ORIENTED_EDGE('',*,*,#120628,.T.); +#120746 = ORIENTED_EDGE('',*,*,#120602,.T.); +#120747 = ORIENTED_EDGE('',*,*,#120579,.T.); +#120748 = ORIENTED_EDGE('',*,*,#119919,.F.); +#120749 = ORIENTED_EDGE('',*,*,#120675,.T.); +#120750 = ORIENTED_EDGE('',*,*,#120651,.T.); +#120751 = PLANE('',#120752); +#120752 = AXIS2_PLACEMENT_3D('',#120753,#120754,#120755); +#120753 = CARTESIAN_POINT('',(0.,-6.075,-10.7553)); +#120754 = DIRECTION('',(0.,0.,1.)); +#120755 = DIRECTION('',(1.,0.,-0.)); +#120756 = ADVANCED_FACE('',(#120757),#120768,.F.); +#120757 = FACE_BOUND('',#120758,.T.); +#120758 = EDGE_LOOP('',(#120759,#120760,#120766,#120767)); +#120759 = ORIENTED_EDGE('',*,*,#120731,.F.); +#120760 = ORIENTED_EDGE('',*,*,#120761,.T.); +#120761 = EDGE_CURVE('',#120723,#120238,#120762,.T.); +#120762 = LINE('',#120763,#120764); +#120763 = CARTESIAN_POINT('',(5.475,-4.975,-10.7553)); +#120764 = VECTOR('',#120765,1.); +#120765 = DIRECTION('',(0.,0.,-1.)); +#120766 = ORIENTED_EDGE('',*,*,#120237,.T.); +#120767 = ORIENTED_EDGE('',*,*,#120214,.F.); +#120768 = PLANE('',#120769); +#120769 = AXIS2_PLACEMENT_3D('',#120770,#120771,#120772); +#120770 = CARTESIAN_POINT('',(5.775,-4.975,-10.7553)); +#120771 = DIRECTION('',(0.,-1.,0.)); +#120772 = DIRECTION('',(0.,0.,-1.)); +#120773 = ADVANCED_FACE('',(#120774),#120785,.T.); +#120774 = FACE_BOUND('',#120775,.T.); +#120775 = EDGE_LOOP('',(#120776,#120777,#120778,#120784)); +#120776 = ORIENTED_EDGE('',*,*,#120761,.F.); +#120777 = ORIENTED_EDGE('',*,*,#120722,.F.); +#120778 = ORIENTED_EDGE('',*,*,#120779,.T.); +#120779 = EDGE_CURVE('',#120715,#120246,#120780,.T.); +#120780 = LINE('',#120781,#120782); +#120781 = CARTESIAN_POINT('',(5.775,-5.275,-10.7553)); +#120782 = VECTOR('',#120783,1.); +#120783 = DIRECTION('',(0.,0.,-1.)); +#120784 = ORIENTED_EDGE('',*,*,#120245,.F.); +#120785 = CYLINDRICAL_SURFACE('',#120786,0.3); +#120786 = AXIS2_PLACEMENT_3D('',#120787,#120788,#120789); +#120787 = CARTESIAN_POINT('',(5.475,-5.275,18.48968)); +#120788 = DIRECTION('',(0.,0.,-1.)); +#120789 = DIRECTION('',(0.,1.,0.)); +#120790 = ADVANCED_FACE('',(#120791),#120799,.F.); +#120791 = FACE_BOUND('',#120792,.T.); +#120792 = EDGE_LOOP('',(#120793,#120794,#120795,#120796,#120797,#120798) + ); +#120793 = ORIENTED_EDGE('',*,*,#120714,.F.); +#120794 = ORIENTED_EDGE('',*,*,#120104,.F.); +#120795 = ORIENTED_EDGE('',*,*,#120372,.T.); +#120796 = ORIENTED_EDGE('',*,*,#120338,.T.); +#120797 = ORIENTED_EDGE('',*,*,#120254,.T.); +#120798 = ORIENTED_EDGE('',*,*,#120779,.F.); +#120799 = PLANE('',#120800); +#120800 = AXIS2_PLACEMENT_3D('',#120801,#120802,#120803); +#120801 = CARTESIAN_POINT('',(5.775,-6.575,-10.7553)); +#120802 = DIRECTION('',(-1.,0.,0.)); +#120803 = DIRECTION('',(0.,0.,1.)); +#120804 = ADVANCED_FACE('',(#120805),#120816,.F.); +#120805 = FACE_BOUND('',#120806,.T.); +#120806 = EDGE_LOOP('',(#120807,#120813,#120814,#120815)); +#120807 = ORIENTED_EDGE('',*,*,#120808,.T.); +#120808 = EDGE_CURVE('',#119681,#119953,#120809,.T.); +#120809 = LINE('',#120810,#120811); +#120810 = CARTESIAN_POINT('',(-6.575,-6.575,-5.8208)); +#120811 = VECTOR('',#120812,1.); +#120812 = DIRECTION('',(0.,1.,0.)); +#120813 = ORIENTED_EDGE('',*,*,#119952,.F.); +#120814 = ORIENTED_EDGE('',*,*,#120405,.F.); +#120815 = ORIENTED_EDGE('',*,*,#119688,.T.); +#120816 = PLANE('',#120817); +#120817 = AXIS2_PLACEMENT_3D('',#120818,#120819,#120820); +#120818 = CARTESIAN_POINT('',(-6.575,-6.575,-10.7553)); +#120819 = DIRECTION('',(1.,0.,0.)); +#120820 = DIRECTION('',(-0.,1.,0.)); +#120821 = ADVANCED_FACE('',(#120822),#120833,.F.); +#120822 = FACE_BOUND('',#120823,.T.); +#120823 = EDGE_LOOP('',(#120824,#120830,#120831,#120832)); +#120824 = ORIENTED_EDGE('',*,*,#120825,.T.); +#120825 = EDGE_CURVE('',#119673,#119961,#120826,.T.); +#120826 = LINE('',#120827,#120828); +#120827 = CARTESIAN_POINT('',(-5.975,-6.575,-5.8208)); +#120828 = VECTOR('',#120829,1.); +#120829 = DIRECTION('',(0.,1.,0.)); +#120830 = ORIENTED_EDGE('',*,*,#119960,.F.); +#120831 = ORIENTED_EDGE('',*,*,#120808,.F.); +#120832 = ORIENTED_EDGE('',*,*,#119680,.T.); +#120833 = PLANE('',#120834); +#120834 = AXIS2_PLACEMENT_3D('',#120835,#120836,#120837); +#120835 = CARTESIAN_POINT('',(-6.575,-6.575,-5.8208)); +#120836 = DIRECTION('',(0.,0.,-1.)); +#120837 = DIRECTION('',(0.,-1.,0.)); +#120838 = ADVANCED_FACE('',(#120839),#120850,.F.); +#120839 = FACE_BOUND('',#120840,.T.); +#120840 = EDGE_LOOP('',(#120841,#120847,#120848,#120849)); +#120841 = ORIENTED_EDGE('',*,*,#120842,.T.); +#120842 = EDGE_CURVE('',#119665,#119969,#120843,.T.); +#120843 = LINE('',#120844,#120845); +#120844 = CARTESIAN_POINT('',(-5.975,-6.575,-1.2)); +#120845 = VECTOR('',#120846,1.); +#120846 = DIRECTION('',(0.,1.,0.)); +#120847 = ORIENTED_EDGE('',*,*,#119968,.F.); +#120848 = ORIENTED_EDGE('',*,*,#120825,.F.); +#120849 = ORIENTED_EDGE('',*,*,#119672,.T.); +#120850 = PLANE('',#120851); +#120851 = AXIS2_PLACEMENT_3D('',#120852,#120853,#120854); +#120852 = CARTESIAN_POINT('',(-5.975,-6.575,-5.8208)); +#120853 = DIRECTION('',(1.,0.,0.)); +#120854 = DIRECTION('',(-0.,1.,0.)); +#120855 = ADVANCED_FACE('',(#120856),#120867,.F.); +#120856 = FACE_BOUND('',#120857,.T.); +#120857 = EDGE_LOOP('',(#120858,#120859,#120860,#120861)); +#120858 = ORIENTED_EDGE('',*,*,#119976,.F.); +#120859 = ORIENTED_EDGE('',*,*,#120842,.F.); +#120860 = ORIENTED_EDGE('',*,*,#119664,.T.); +#120861 = ORIENTED_EDGE('',*,*,#120862,.T.); +#120862 = EDGE_CURVE('',#119656,#119977,#120863,.T.); +#120863 = LINE('',#120864,#120865); +#120864 = CARTESIAN_POINT('',(-5.609475380552,-6.575,-0.377569606242)); +#120865 = VECTOR('',#120866,1.); +#120866 = DIRECTION('',(0.,1.,0.)); +#120867 = PLANE('',#120868); +#120868 = AXIS2_PLACEMENT_3D('',#120869,#120870,#120871); +#120869 = CARTESIAN_POINT('',(-5.975,-6.575,-1.2)); +#120870 = DIRECTION('',(0.91381154862,0.,-0.406138466053)); +#120871 = DIRECTION('',(0.,-1.,0.)); +#120872 = ADVANCED_FACE('',(#120873),#120884,.F.); +#120873 = FACE_BOUND('',#120874,.F.); +#120874 = EDGE_LOOP('',(#120875,#120881,#120882,#120883)); +#120875 = ORIENTED_EDGE('',*,*,#120876,.F.); +#120876 = EDGE_CURVE('',#119648,#119985,#120877,.T.); +#120877 = LINE('',#120878,#120879); +#120878 = CARTESIAN_POINT('',(-5.575,-6.575,-0.21511421982)); +#120879 = VECTOR('',#120880,1.); +#120880 = DIRECTION('',(0.,1.,0.)); +#120881 = ORIENTED_EDGE('',*,*,#119655,.T.); +#120882 = ORIENTED_EDGE('',*,*,#120862,.T.); +#120883 = ORIENTED_EDGE('',*,*,#119984,.T.); +#120884 = CYLINDRICAL_SURFACE('',#120885,0.4); +#120885 = AXIS2_PLACEMENT_3D('',#120886,#120887,#120888); +#120886 = CARTESIAN_POINT('',(-5.975,-23.71788209056,-0.21511421982)); +#120887 = DIRECTION('',(0.,1.,0.)); +#120888 = DIRECTION('',(1.,0.,0.)); +#120889 = ADVANCED_FACE('',(#120890),#120896,.F.); +#120890 = FACE_BOUND('',#120891,.T.); +#120891 = EDGE_LOOP('',(#120892,#120893,#120894,#120895)); +#120892 = ORIENTED_EDGE('',*,*,#119647,.T.); +#120893 = ORIENTED_EDGE('',*,*,#105220,.T.); +#120894 = ORIENTED_EDGE('',*,*,#119993,.F.); +#120895 = ORIENTED_EDGE('',*,*,#120876,.F.); +#120896 = PLANE('',#120897); +#120897 = AXIS2_PLACEMENT_3D('',#120898,#120899,#120900); +#120898 = CARTESIAN_POINT('',(-5.575,-6.575,-0.3)); +#120899 = DIRECTION('',(1.,0.,0.)); +#120900 = DIRECTION('',(-0.,1.,0.)); +#120901 = ADVANCED_FACE('',(#120902),#120920,.F.); +#120902 = FACE_BOUND('',#120903,.T.); +#120903 = EDGE_LOOP('',(#120904,#120905,#120906,#120912,#120913,#120914) + ); +#120904 = ORIENTED_EDGE('',*,*,#105120,.F.); +#120905 = ORIENTED_EDGE('',*,*,#120031,.F.); +#120906 = ORIENTED_EDGE('',*,*,#120907,.T.); +#120907 = EDGE_CURVE('',#120023,#119275,#120908,.T.); +#120908 = LINE('',#120909,#120910); +#120909 = CARTESIAN_POINT('',(4.3,-6.075,5.E-02)); +#120910 = VECTOR('',#120911,1.); +#120911 = DIRECTION('',(0.,-1.,0.)); +#120912 = ORIENTED_EDGE('',*,*,#119274,.F.); +#120913 = ORIENTED_EDGE('',*,*,#105645,.T.); +#120914 = ORIENTED_EDGE('',*,*,#120915,.T.); +#120915 = EDGE_CURVE('',#105637,#105121,#120916,.T.); +#120916 = LINE('',#120917,#120918); +#120917 = CARTESIAN_POINT('',(4.3,-5.925,0.5)); +#120918 = VECTOR('',#120919,1.); +#120919 = DIRECTION('',(0.,0.,-1.)); +#120920 = PLANE('',#120921); +#120921 = AXIS2_PLACEMENT_3D('',#120922,#120923,#120924); +#120922 = CARTESIAN_POINT('',(4.3,-6.575,0.5)); +#120923 = DIRECTION('',(1.,0.,0.)); +#120924 = DIRECTION('',(-0.,1.,0.)); +#120925 = ADVANCED_FACE('',(#120926),#120937,.F.); +#120926 = FACE_BOUND('',#120927,.F.); +#120927 = EDGE_LOOP('',(#120928,#120934,#120935,#120936)); +#120928 = ORIENTED_EDGE('',*,*,#120929,.F.); +#120929 = EDGE_CURVE('',#105629,#105129,#120930,.T.); +#120930 = LINE('',#120931,#120932); +#120931 = CARTESIAN_POINT('',(4.15,-5.775,0.5)); +#120932 = VECTOR('',#120933,1.); +#120933 = DIRECTION('',(0.,0.,-1.)); +#120934 = ORIENTED_EDGE('',*,*,#105636,.T.); +#120935 = ORIENTED_EDGE('',*,*,#120915,.T.); +#120936 = ORIENTED_EDGE('',*,*,#105128,.T.); +#120937 = CYLINDRICAL_SURFACE('',#120938,0.15); +#120938 = AXIS2_PLACEMENT_3D('',#120939,#120940,#120941); +#120939 = CARTESIAN_POINT('',(4.15,-5.925,18.48968)); +#120940 = DIRECTION('',(0.,0.,-1.)); +#120941 = DIRECTION('',(0.,1.,0.)); +#120942 = ADVANCED_FACE('',(#120943),#120954,.F.); +#120943 = FACE_BOUND('',#120944,.T.); +#120944 = EDGE_LOOP('',(#120945,#120946,#120947,#120948)); +#120945 = ORIENTED_EDGE('',*,*,#105137,.F.); +#120946 = ORIENTED_EDGE('',*,*,#120929,.F.); +#120947 = ORIENTED_EDGE('',*,*,#105628,.T.); +#120948 = ORIENTED_EDGE('',*,*,#120949,.T.); +#120949 = EDGE_CURVE('',#105620,#105138,#120950,.T.); +#120950 = LINE('',#120951,#120952); +#120951 = CARTESIAN_POINT('',(2.95,-5.775,0.5)); +#120952 = VECTOR('',#120953,1.); +#120953 = DIRECTION('',(0.,0.,-1.)); +#120954 = PLANE('',#120955); +#120955 = AXIS2_PLACEMENT_3D('',#120956,#120957,#120958); +#120956 = CARTESIAN_POINT('',(4.3,-5.775,0.5)); +#120957 = DIRECTION('',(-0.,1.,0.)); +#120958 = DIRECTION('',(1.,0.,0.)); +#120959 = ADVANCED_FACE('',(#120960),#120971,.F.); +#120960 = FACE_BOUND('',#120961,.F.); +#120961 = EDGE_LOOP('',(#120962,#120968,#120969,#120970)); +#120962 = ORIENTED_EDGE('',*,*,#120963,.F.); +#120963 = EDGE_CURVE('',#105612,#105146,#120964,.T.); +#120964 = LINE('',#120965,#120966); +#120965 = CARTESIAN_POINT('',(2.8,-5.925,0.5)); +#120966 = VECTOR('',#120967,1.); +#120967 = DIRECTION('',(0.,0.,-1.)); +#120968 = ORIENTED_EDGE('',*,*,#105619,.T.); +#120969 = ORIENTED_EDGE('',*,*,#120949,.T.); +#120970 = ORIENTED_EDGE('',*,*,#105145,.T.); +#120971 = CYLINDRICAL_SURFACE('',#120972,0.15); +#120972 = AXIS2_PLACEMENT_3D('',#120973,#120974,#120975); +#120973 = CARTESIAN_POINT('',(2.95,-5.925,18.48968)); +#120974 = DIRECTION('',(0.,0.,-1.)); +#120975 = DIRECTION('',(-1.,0.,0.)); +#120976 = ADVANCED_FACE('',(#120977),#120990,.F.); +#120977 = FACE_BOUND('',#120978,.T.); +#120978 = EDGE_LOOP('',(#120979,#120980,#120981,#120987,#120988,#120989) + ); +#120979 = ORIENTED_EDGE('',*,*,#105611,.F.); +#120980 = ORIENTED_EDGE('',*,*,#119231,.T.); +#120981 = ORIENTED_EDGE('',*,*,#120982,.T.); +#120982 = EDGE_CURVE('',#119222,#120007,#120983,.T.); +#120983 = LINE('',#120984,#120985); +#120984 = CARTESIAN_POINT('',(2.8,-6.572493718553,5.E-02)); +#120985 = VECTOR('',#120986,1.); +#120986 = DIRECTION('',(0.,1.,0.)); +#120987 = ORIENTED_EDGE('',*,*,#120006,.T.); +#120988 = ORIENTED_EDGE('',*,*,#105154,.T.); +#120989 = ORIENTED_EDGE('',*,*,#120963,.F.); +#120990 = PLANE('',#120991); +#120991 = AXIS2_PLACEMENT_3D('',#120992,#120993,#120994); +#120992 = CARTESIAN_POINT('',(2.8,-5.775,0.5)); +#120993 = DIRECTION('',(-1.,0.,0.)); +#120994 = DIRECTION('',(0.,0.,1.)); +#120995 = ADVANCED_FACE('',(#120996),#121003,.F.); +#120996 = FACE_BOUND('',#120997,.F.); +#120997 = EDGE_LOOP('',(#120998,#120999,#121000,#121001,#121002)); +#120998 = ORIENTED_EDGE('',*,*,#119506,.F.); +#120999 = ORIENTED_EDGE('',*,*,#119635,.T.); +#121000 = ORIENTED_EDGE('',*,*,#119219,.T.); +#121001 = ORIENTED_EDGE('',*,*,#120982,.T.); +#121002 = ORIENTED_EDGE('',*,*,#120014,.T.); +#121003 = CYLINDRICAL_SURFACE('',#121004,0.15); +#121004 = AXIS2_PLACEMENT_3D('',#121005,#121006,#121007); +#121005 = CARTESIAN_POINT('',(2.95,-23.71788209056,5.E-02)); +#121006 = DIRECTION('',(0.,1.,0.)); +#121007 = DIRECTION('',(0.,0.,-1.)); +#121008 = ADVANCED_FACE('',(#121009),#121016,.F.); +#121009 = FACE_BOUND('',#121010,.F.); +#121010 = EDGE_LOOP('',(#121011,#121012,#121013,#121014,#121015)); +#121011 = ORIENTED_EDGE('',*,*,#119490,.F.); +#121012 = ORIENTED_EDGE('',*,*,#120022,.T.); +#121013 = ORIENTED_EDGE('',*,*,#120907,.T.); +#121014 = ORIENTED_EDGE('',*,*,#119283,.T.); +#121015 = ORIENTED_EDGE('',*,*,#119627,.T.); +#121016 = CYLINDRICAL_SURFACE('',#121017,0.15); +#121017 = AXIS2_PLACEMENT_3D('',#121018,#121019,#121020); +#121018 = CARTESIAN_POINT('',(4.15,23.71788209057,5.E-02)); +#121019 = DIRECTION('',(0.,-1.,0.)); +#121020 = DIRECTION('',(0.,0.,-1.)); +#121021 = ADVANCED_FACE('',(#121022),#121028,.F.); +#121022 = FACE_BOUND('',#121023,.F.); +#121023 = EDGE_LOOP('',(#121024,#121025,#121026,#121027)); +#121024 = ORIENTED_EDGE('',*,*,#119163,.F.); +#121025 = ORIENTED_EDGE('',*,*,#105228,.F.); +#121026 = ORIENTED_EDGE('',*,*,#115252,.F.); +#121027 = ORIENTED_EDGE('',*,*,#105544,.T.); +#121028 = CYLINDRICAL_SURFACE('',#121029,1.); +#121029 = AXIS2_PLACEMENT_3D('',#121030,#121031,#121032); +#121030 = CARTESIAN_POINT('',(-6.575,-6.575,0.)); +#121031 = DIRECTION('',(0.,0.,1.)); +#121032 = DIRECTION('',(1.,0.,-0.)); +#121033 = MANIFOLD_SOLID_BREP('',#121034); +#121034 = CLOSED_SHELL('',(#121035,#121163,#121194,#121289,#121320, + #121453,#121485,#121517,#121534,#121551,#121563,#121595,#121627, + #121644,#121661,#121673,#121704,#121737,#121754,#121771,#121783, + #121815,#121847,#121865,#121875,#121899,#121923,#122075,#122106, + #122137,#122154,#122171,#122183,#122200,#122217,#122229,#122254, + #122458,#122489,#122513,#122537,#122562,#122579,#122746,#122786, + #122826,#123407,#123575,#123727,#123815,#123903,#123925,#123937, + #123954,#123966,#123983,#124000,#124017,#124029,#124051,#124068, + #124085,#124102,#124114,#124145,#124169,#124193,#124217,#124241, + #124265,#124289,#124313,#124337,#124361,#124385,#124409,#124433, + #124457,#124481,#124505,#124529,#124553,#124577,#124601,#124625, + #124649,#124673,#124697,#124721,#124745,#124769,#124793,#124817, + #124841,#124865,#124889,#124913,#124937,#124961,#124985,#125009, + #125033,#125057,#125074,#125284,#125646,#125970,#125992,#126009, + #126026,#126043,#126060,#126077,#126094,#126111,#126128,#126145, + #126162,#126179,#126196,#126213,#126230,#126247,#126264,#126281, + #126298,#126310,#126332,#126349,#126366,#126383,#126400,#126417, + #126434,#126451,#126468,#126485,#126502,#126519,#126536,#126553, + #126570,#126587,#126604,#126621,#126638,#126655,#126672,#126689, + #126706,#126723,#126740,#126752,#126774,#126791,#126808,#126825, + #126842,#126859,#126876,#126893,#126910,#126927,#126944,#126961, + #126978,#126995,#127012,#127029,#127046,#127058,#127080,#127097, + #127114,#127131,#127148,#127165,#127182,#127199,#127216,#127233, + #127250,#127267,#127284,#127301,#127318,#127335,#127352,#127369, + #127381,#127403,#127420,#127437,#127454,#127471,#127488,#127505, + #127522,#127539,#127551,#127573,#127590,#127607,#127624,#127641, + #127658,#127675,#127692,#127709,#127721,#127753,#127771,#127801, + #127833,#127851,#127927,#127958,#128003,#128035,#128075,#128099, + #128130,#128153,#128170,#128188,#128214,#128231,#128243,#128267, + #128285,#128297,#128363,#128387,#128411,#128442,#128459,#128471, + #128488,#128505,#128517,#128534)); +#121035 = ADVANCED_FACE('',(#121036),#121158,.F.); +#121036 = FACE_BOUND('',#121037,.T.); +#121037 = EDGE_LOOP('',(#121038,#121048,#121056,#121064,#121072,#121080, + #121088,#121096,#121104,#121112,#121120,#121128,#121136,#121144, + #121152)); +#121038 = ORIENTED_EDGE('',*,*,#121039,.T.); +#121039 = EDGE_CURVE('',#121040,#121042,#121044,.T.); +#121040 = VERTEX_POINT('',#121041); +#121041 = CARTESIAN_POINT('',(-4.75,8.9,-10.5)); +#121042 = VERTEX_POINT('',#121043); +#121043 = CARTESIAN_POINT('',(-4.75,7.775,-10.5)); +#121044 = LINE('',#121045,#121046); +#121045 = CARTESIAN_POINT('',(-4.75,8.9,-10.5)); +#121046 = VECTOR('',#121047,1.); +#121047 = DIRECTION('',(0.,-1.,0.)); +#121048 = ORIENTED_EDGE('',*,*,#121049,.F.); +#121049 = EDGE_CURVE('',#121050,#121042,#121052,.T.); +#121050 = VERTEX_POINT('',#121051); +#121051 = CARTESIAN_POINT('',(-4.75,7.775,-8.6)); +#121052 = LINE('',#121053,#121054); +#121053 = CARTESIAN_POINT('',(-4.75,7.775,-8.6)); +#121054 = VECTOR('',#121055,1.); +#121055 = DIRECTION('',(0.,0.,-1.)); +#121056 = ORIENTED_EDGE('',*,*,#121057,.F.); +#121057 = EDGE_CURVE('',#121058,#121050,#121060,.T.); +#121058 = VERTEX_POINT('',#121059); +#121059 = CARTESIAN_POINT('',(-4.75,6.575,-8.6)); +#121060 = LINE('',#121061,#121062); +#121061 = CARTESIAN_POINT('',(-4.75,6.575,-8.6)); +#121062 = VECTOR('',#121063,1.); +#121063 = DIRECTION('',(0.,1.,0.)); +#121064 = ORIENTED_EDGE('',*,*,#121065,.F.); +#121065 = EDGE_CURVE('',#121066,#121058,#121068,.T.); +#121066 = VERTEX_POINT('',#121067); +#121067 = CARTESIAN_POINT('',(-4.75,6.575,-6.8096)); +#121068 = LINE('',#121069,#121070); +#121069 = CARTESIAN_POINT('',(-4.75,6.575,-6.8096)); +#121070 = VECTOR('',#121071,1.); +#121071 = DIRECTION('',(0.,0.,-1.)); +#121072 = ORIENTED_EDGE('',*,*,#121073,.T.); +#121073 = EDGE_CURVE('',#121066,#121074,#121076,.T.); +#121074 = VERTEX_POINT('',#121075); +#121075 = CARTESIAN_POINT('',(-4.75,7.875,-6.8096)); +#121076 = LINE('',#121077,#121078); +#121077 = CARTESIAN_POINT('',(-4.75,6.575,-6.8096)); +#121078 = VECTOR('',#121079,1.); +#121079 = DIRECTION('',(0.,1.,0.)); +#121080 = ORIENTED_EDGE('',*,*,#121081,.T.); +#121081 = EDGE_CURVE('',#121074,#121082,#121084,.T.); +#121082 = VERTEX_POINT('',#121083); +#121083 = CARTESIAN_POINT('',(-4.75,7.875,-6.5096)); +#121084 = LINE('',#121085,#121086); +#121085 = CARTESIAN_POINT('',(-4.75,7.875,-6.8096)); +#121086 = VECTOR('',#121087,1.); +#121087 = DIRECTION('',(0.,0.,1.)); +#121088 = ORIENTED_EDGE('',*,*,#121089,.F.); +#121089 = EDGE_CURVE('',#121090,#121082,#121092,.T.); +#121090 = VERTEX_POINT('',#121091); +#121091 = CARTESIAN_POINT('',(-4.75,6.575,-6.5096)); +#121092 = LINE('',#121093,#121094); +#121093 = CARTESIAN_POINT('',(-4.75,6.575,-6.5096)); +#121094 = VECTOR('',#121095,1.); +#121095 = DIRECTION('',(0.,1.,0.)); +#121096 = ORIENTED_EDGE('',*,*,#121097,.F.); +#121097 = EDGE_CURVE('',#121098,#121090,#121100,.T.); +#121098 = VERTEX_POINT('',#121099); +#121099 = CARTESIAN_POINT('',(-4.75,6.575,-2.9904)); +#121100 = LINE('',#121101,#121102); +#121101 = CARTESIAN_POINT('',(-4.75,6.575,-2.9904)); +#121102 = VECTOR('',#121103,1.); +#121103 = DIRECTION('',(0.,0.,-1.)); +#121104 = ORIENTED_EDGE('',*,*,#121105,.T.); +#121105 = EDGE_CURVE('',#121098,#121106,#121108,.T.); +#121106 = VERTEX_POINT('',#121107); +#121107 = CARTESIAN_POINT('',(-4.75,7.875,-2.9904)); +#121108 = LINE('',#121109,#121110); +#121109 = CARTESIAN_POINT('',(-4.75,6.575,-2.9904)); +#121110 = VECTOR('',#121111,1.); +#121111 = DIRECTION('',(0.,1.,0.)); +#121112 = ORIENTED_EDGE('',*,*,#121113,.T.); +#121113 = EDGE_CURVE('',#121106,#121114,#121116,.T.); +#121114 = VERTEX_POINT('',#121115); +#121115 = CARTESIAN_POINT('',(-4.75,7.875,-2.6904)); +#121116 = LINE('',#121117,#121118); +#121117 = CARTESIAN_POINT('',(-4.75,7.875,-2.9904)); +#121118 = VECTOR('',#121119,1.); +#121119 = DIRECTION('',(0.,0.,1.)); +#121120 = ORIENTED_EDGE('',*,*,#121121,.F.); +#121121 = EDGE_CURVE('',#121122,#121114,#121124,.T.); +#121122 = VERTEX_POINT('',#121123); +#121123 = CARTESIAN_POINT('',(-4.75,6.575,-2.6904)); +#121124 = LINE('',#121125,#121126); +#121125 = CARTESIAN_POINT('',(-4.75,6.575,-2.6904)); +#121126 = VECTOR('',#121127,1.); +#121127 = DIRECTION('',(0.,1.,0.)); +#121128 = ORIENTED_EDGE('',*,*,#121129,.F.); +#121129 = EDGE_CURVE('',#121130,#121122,#121132,.T.); +#121130 = VERTEX_POINT('',#121131); +#121131 = CARTESIAN_POINT('',(-4.75,6.575,-2.5)); +#121132 = LINE('',#121133,#121134); +#121133 = CARTESIAN_POINT('',(-4.75,6.575,-2.5)); +#121134 = VECTOR('',#121135,1.); +#121135 = DIRECTION('',(0.,0.,-1.)); +#121136 = ORIENTED_EDGE('',*,*,#121137,.T.); +#121137 = EDGE_CURVE('',#121130,#121138,#121140,.T.); +#121138 = VERTEX_POINT('',#121139); +#121139 = CARTESIAN_POINT('',(-4.75,8.9,-2.5)); +#121140 = LINE('',#121141,#121142); +#121141 = CARTESIAN_POINT('',(-4.75,6.575,-2.5)); +#121142 = VECTOR('',#121143,1.); +#121143 = DIRECTION('',(0.,1.,0.)); +#121144 = ORIENTED_EDGE('',*,*,#121145,.F.); +#121145 = EDGE_CURVE('',#121146,#121138,#121148,.T.); +#121146 = VERTEX_POINT('',#121147); +#121147 = CARTESIAN_POINT('',(-4.75,8.9,-8.3)); +#121148 = LINE('',#121149,#121150); +#121149 = CARTESIAN_POINT('',(-4.75,8.9,-8.3)); +#121150 = VECTOR('',#121151,1.); +#121151 = DIRECTION('',(0.,0.,1.)); +#121152 = ORIENTED_EDGE('',*,*,#121153,.F.); +#121153 = EDGE_CURVE('',#121040,#121146,#121154,.T.); +#121154 = LINE('',#121155,#121156); +#121155 = CARTESIAN_POINT('',(-4.75,8.9,-10.5)); +#121156 = VECTOR('',#121157,1.); +#121157 = DIRECTION('',(0.,0.,1.)); +#121158 = PLANE('',#121159); +#121159 = AXIS2_PLACEMENT_3D('',#121160,#121161,#121162); +#121160 = CARTESIAN_POINT('',(-4.75,0.,0.)); +#121161 = DIRECTION('',(1.,0.,0.)); +#121162 = DIRECTION('',(-0.,1.,0.)); +#121163 = ADVANCED_FACE('',(#121164),#121189,.T.); +#121164 = FACE_BOUND('',#121165,.T.); +#121165 = EDGE_LOOP('',(#121166,#121176,#121182,#121183)); +#121166 = ORIENTED_EDGE('',*,*,#121167,.F.); +#121167 = EDGE_CURVE('',#121168,#121170,#121172,.T.); +#121168 = VERTEX_POINT('',#121169); +#121169 = CARTESIAN_POINT('',(-4.25,9.4,-10.5)); +#121170 = VERTEX_POINT('',#121171); +#121171 = CARTESIAN_POINT('',(-4.25,9.4,-8.3)); +#121172 = LINE('',#121173,#121174); +#121173 = CARTESIAN_POINT('',(-4.25,9.4,-10.5)); +#121174 = VECTOR('',#121175,1.); +#121175 = DIRECTION('',(0.,0.,1.)); +#121176 = ORIENTED_EDGE('',*,*,#121177,.F.); +#121177 = EDGE_CURVE('',#121040,#121168,#121178,.T.); +#121178 = LINE('',#121179,#121180); +#121179 = CARTESIAN_POINT('',(-4.75,8.9,-10.5)); +#121180 = VECTOR('',#121181,1.); +#121181 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#121182 = ORIENTED_EDGE('',*,*,#121153,.T.); +#121183 = ORIENTED_EDGE('',*,*,#121184,.F.); +#121184 = EDGE_CURVE('',#121170,#121146,#121185,.T.); +#121185 = LINE('',#121186,#121187); +#121186 = CARTESIAN_POINT('',(-4.25,9.4,-8.3)); +#121187 = VECTOR('',#121188,1.); +#121188 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#121189 = PLANE('',#121190); +#121190 = AXIS2_PLACEMENT_3D('',#121191,#121192,#121193); +#121191 = CARTESIAN_POINT('',(-4.5,9.15,-9.4)); +#121192 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#121193 = DIRECTION('',(0.,0.,1.)); +#121194 = ADVANCED_FACE('',(#121195),#121284,.T.); +#121195 = FACE_BOUND('',#121196,.T.); +#121196 = EDGE_LOOP('',(#121197,#121205,#121206,#121214,#121222,#121230, + #121238,#121246,#121254,#121262,#121270,#121278)); +#121197 = ORIENTED_EDGE('',*,*,#121198,.F.); +#121198 = EDGE_CURVE('',#121170,#121199,#121201,.T.); +#121199 = VERTEX_POINT('',#121200); +#121200 = CARTESIAN_POINT('',(4.25,9.4,-8.3)); +#121201 = LINE('',#121202,#121203); +#121202 = CARTESIAN_POINT('',(-4.25,9.4,-8.3)); +#121203 = VECTOR('',#121204,1.); +#121204 = DIRECTION('',(1.,0.,0.)); +#121205 = ORIENTED_EDGE('',*,*,#121184,.T.); +#121206 = ORIENTED_EDGE('',*,*,#121207,.T.); +#121207 = EDGE_CURVE('',#121146,#121208,#121210,.T.); +#121208 = VERTEX_POINT('',#121209); +#121209 = CARTESIAN_POINT('',(-3.55,8.9,-8.3)); +#121210 = LINE('',#121211,#121212); +#121211 = CARTESIAN_POINT('',(-4.75,8.9,-8.3)); +#121212 = VECTOR('',#121213,1.); +#121213 = DIRECTION('',(1.,0.,0.)); +#121214 = ORIENTED_EDGE('',*,*,#121215,.T.); +#121215 = EDGE_CURVE('',#121208,#121216,#121218,.T.); +#121216 = VERTEX_POINT('',#121217); +#121217 = CARTESIAN_POINT('',(-3.55,8.5,-8.3)); +#121218 = LINE('',#121219,#121220); +#121219 = CARTESIAN_POINT('',(-3.55,8.9,-8.3)); +#121220 = VECTOR('',#121221,1.); +#121221 = DIRECTION('',(0.,-1.,0.)); +#121222 = ORIENTED_EDGE('',*,*,#121223,.F.); +#121223 = EDGE_CURVE('',#121224,#121216,#121226,.T.); +#121224 = VERTEX_POINT('',#121225); +#121225 = CARTESIAN_POINT('',(-1.,8.5,-8.3)); +#121226 = LINE('',#121227,#121228); +#121227 = CARTESIAN_POINT('',(-1.,8.5,-8.3)); +#121228 = VECTOR('',#121229,1.); +#121229 = DIRECTION('',(-1.,0.,0.)); +#121230 = ORIENTED_EDGE('',*,*,#121231,.F.); +#121231 = EDGE_CURVE('',#121232,#121224,#121234,.T.); +#121232 = VERTEX_POINT('',#121233); +#121233 = CARTESIAN_POINT('',(-1.,8.9,-8.3)); +#121234 = LINE('',#121235,#121236); +#121235 = CARTESIAN_POINT('',(-1.,8.9,-8.3)); +#121236 = VECTOR('',#121237,1.); +#121237 = DIRECTION('',(0.,-1.,0.)); +#121238 = ORIENTED_EDGE('',*,*,#121239,.T.); +#121239 = EDGE_CURVE('',#121232,#121240,#121242,.T.); +#121240 = VERTEX_POINT('',#121241); +#121241 = CARTESIAN_POINT('',(1.,8.9,-8.3)); +#121242 = LINE('',#121243,#121244); +#121243 = CARTESIAN_POINT('',(-1.,8.9,-8.3)); +#121244 = VECTOR('',#121245,1.); +#121245 = DIRECTION('',(1.,0.,0.)); +#121246 = ORIENTED_EDGE('',*,*,#121247,.T.); +#121247 = EDGE_CURVE('',#121240,#121248,#121250,.T.); +#121248 = VERTEX_POINT('',#121249); +#121249 = CARTESIAN_POINT('',(1.,8.5,-8.3)); +#121250 = LINE('',#121251,#121252); +#121251 = CARTESIAN_POINT('',(1.,8.9,-8.3)); +#121252 = VECTOR('',#121253,1.); +#121253 = DIRECTION('',(0.,-1.,0.)); +#121254 = ORIENTED_EDGE('',*,*,#121255,.F.); +#121255 = EDGE_CURVE('',#121256,#121248,#121258,.T.); +#121256 = VERTEX_POINT('',#121257); +#121257 = CARTESIAN_POINT('',(3.55,8.5,-8.3)); +#121258 = LINE('',#121259,#121260); +#121259 = CARTESIAN_POINT('',(3.55,8.5,-8.3)); +#121260 = VECTOR('',#121261,1.); +#121261 = DIRECTION('',(-1.,0.,0.)); +#121262 = ORIENTED_EDGE('',*,*,#121263,.F.); +#121263 = EDGE_CURVE('',#121264,#121256,#121266,.T.); +#121264 = VERTEX_POINT('',#121265); +#121265 = CARTESIAN_POINT('',(3.55,8.9,-8.3)); +#121266 = LINE('',#121267,#121268); +#121267 = CARTESIAN_POINT('',(3.55,8.9,-8.3)); +#121268 = VECTOR('',#121269,1.); +#121269 = DIRECTION('',(0.,-1.,0.)); +#121270 = ORIENTED_EDGE('',*,*,#121271,.T.); +#121271 = EDGE_CURVE('',#121264,#121272,#121274,.T.); +#121272 = VERTEX_POINT('',#121273); +#121273 = CARTESIAN_POINT('',(4.75,8.9,-8.3)); +#121274 = LINE('',#121275,#121276); +#121275 = CARTESIAN_POINT('',(3.55,8.9,-8.3)); +#121276 = VECTOR('',#121277,1.); +#121277 = DIRECTION('',(1.,0.,0.)); +#121278 = ORIENTED_EDGE('',*,*,#121279,.T.); +#121279 = EDGE_CURVE('',#121272,#121199,#121280,.T.); +#121280 = LINE('',#121281,#121282); +#121281 = CARTESIAN_POINT('',(4.75,8.9,-8.3)); +#121282 = VECTOR('',#121283,1.); +#121283 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#121284 = PLANE('',#121285); +#121285 = AXIS2_PLACEMENT_3D('',#121286,#121287,#121288); +#121286 = CARTESIAN_POINT('',(-4.75,8.9,-8.3)); +#121287 = DIRECTION('',(0.,0.,1.)); +#121288 = DIRECTION('',(1.,0.,-0.)); +#121289 = ADVANCED_FACE('',(#121290),#121315,.T.); +#121290 = FACE_BOUND('',#121291,.T.); +#121291 = EDGE_LOOP('',(#121292,#121300,#121301,#121309)); +#121292 = ORIENTED_EDGE('',*,*,#121293,.F.); +#121293 = EDGE_CURVE('',#121199,#121294,#121296,.T.); +#121294 = VERTEX_POINT('',#121295); +#121295 = CARTESIAN_POINT('',(4.25,9.4,-10.5)); +#121296 = LINE('',#121297,#121298); +#121297 = CARTESIAN_POINT('',(4.25,9.4,-8.3)); +#121298 = VECTOR('',#121299,1.); +#121299 = DIRECTION('',(0.,0.,-1.)); +#121300 = ORIENTED_EDGE('',*,*,#121279,.F.); +#121301 = ORIENTED_EDGE('',*,*,#121302,.T.); +#121302 = EDGE_CURVE('',#121272,#121303,#121305,.T.); +#121303 = VERTEX_POINT('',#121304); +#121304 = CARTESIAN_POINT('',(4.75,8.9,-10.5)); +#121305 = LINE('',#121306,#121307); +#121306 = CARTESIAN_POINT('',(4.75,8.9,-8.3)); +#121307 = VECTOR('',#121308,1.); +#121308 = DIRECTION('',(0.,0.,-1.)); +#121309 = ORIENTED_EDGE('',*,*,#121310,.F.); +#121310 = EDGE_CURVE('',#121294,#121303,#121311,.T.); +#121311 = LINE('',#121312,#121313); +#121312 = CARTESIAN_POINT('',(4.25,9.4,-10.5)); +#121313 = VECTOR('',#121314,1.); +#121314 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#121315 = PLANE('',#121316); +#121316 = AXIS2_PLACEMENT_3D('',#121317,#121318,#121319); +#121317 = CARTESIAN_POINT('',(4.5,9.15,-9.4)); +#121318 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#121319 = DIRECTION('',(0.,0.,-1.)); +#121320 = ADVANCED_FACE('',(#121321,#121346,#121380,#121414),#121448,.T. + ); +#121321 = FACE_BOUND('',#121322,.T.); +#121322 = EDGE_LOOP('',(#121323,#121331,#121337,#121338,#121339,#121345) + ); +#121323 = ORIENTED_EDGE('',*,*,#121324,.F.); +#121324 = EDGE_CURVE('',#121325,#121303,#121327,.T.); +#121325 = VERTEX_POINT('',#121326); +#121326 = CARTESIAN_POINT('',(4.75,7.775,-10.5)); +#121327 = LINE('',#121328,#121329); +#121328 = CARTESIAN_POINT('',(4.75,7.775,-10.5)); +#121329 = VECTOR('',#121330,1.); +#121330 = DIRECTION('',(0.,1.,0.)); +#121331 = ORIENTED_EDGE('',*,*,#121332,.F.); +#121332 = EDGE_CURVE('',#121042,#121325,#121333,.T.); +#121333 = LINE('',#121334,#121335); +#121334 = CARTESIAN_POINT('',(-4.75,7.775,-10.5)); +#121335 = VECTOR('',#121336,1.); +#121336 = DIRECTION('',(1.,0.,0.)); +#121337 = ORIENTED_EDGE('',*,*,#121039,.F.); +#121338 = ORIENTED_EDGE('',*,*,#121177,.T.); +#121339 = ORIENTED_EDGE('',*,*,#121340,.F.); +#121340 = EDGE_CURVE('',#121294,#121168,#121341,.T.); +#121341 = LINE('',#121342,#121343); +#121342 = CARTESIAN_POINT('',(4.25,9.4,-10.5)); +#121343 = VECTOR('',#121344,1.); +#121344 = DIRECTION('',(-1.,0.,0.)); +#121345 = ORIENTED_EDGE('',*,*,#121310,.T.); +#121346 = FACE_BOUND('',#121347,.T.); +#121347 = EDGE_LOOP('',(#121348,#121358,#121366,#121374)); +#121348 = ORIENTED_EDGE('',*,*,#121349,.F.); +#121349 = EDGE_CURVE('',#121350,#121352,#121354,.T.); +#121350 = VERTEX_POINT('',#121351); +#121351 = CARTESIAN_POINT('',(-0.4,8.605,-10.5)); +#121352 = VERTEX_POINT('',#121353); +#121353 = CARTESIAN_POINT('',(-0.4,8.855,-10.5)); +#121354 = LINE('',#121355,#121356); +#121355 = CARTESIAN_POINT('',(-0.4,8.605,-10.5)); +#121356 = VECTOR('',#121357,1.); +#121357 = DIRECTION('',(0.,1.,0.)); +#121358 = ORIENTED_EDGE('',*,*,#121359,.F.); +#121359 = EDGE_CURVE('',#121360,#121350,#121362,.T.); +#121360 = VERTEX_POINT('',#121361); +#121361 = CARTESIAN_POINT('',(0.4,8.605,-10.5)); +#121362 = LINE('',#121363,#121364); +#121363 = CARTESIAN_POINT('',(0.4,8.605,-10.5)); +#121364 = VECTOR('',#121365,1.); +#121365 = DIRECTION('',(-1.,0.,0.)); +#121366 = ORIENTED_EDGE('',*,*,#121367,.F.); +#121367 = EDGE_CURVE('',#121368,#121360,#121370,.T.); +#121368 = VERTEX_POINT('',#121369); +#121369 = CARTESIAN_POINT('',(0.4,8.855,-10.5)); +#121370 = LINE('',#121371,#121372); +#121371 = CARTESIAN_POINT('',(0.4,8.855,-10.5)); +#121372 = VECTOR('',#121373,1.); +#121373 = DIRECTION('',(0.,-1.,0.)); +#121374 = ORIENTED_EDGE('',*,*,#121375,.F.); +#121375 = EDGE_CURVE('',#121352,#121368,#121376,.T.); +#121376 = LINE('',#121377,#121378); +#121377 = CARTESIAN_POINT('',(-0.4,8.855,-10.5)); +#121378 = VECTOR('',#121379,1.); +#121379 = DIRECTION('',(1.,0.,0.)); +#121380 = FACE_BOUND('',#121381,.T.); +#121381 = EDGE_LOOP('',(#121382,#121392,#121400,#121408)); +#121382 = ORIENTED_EDGE('',*,*,#121383,.F.); +#121383 = EDGE_CURVE('',#121384,#121386,#121388,.T.); +#121384 = VERTEX_POINT('',#121385); +#121385 = CARTESIAN_POINT('',(2.1,8.855,-10.5)); +#121386 = VERTEX_POINT('',#121387); +#121387 = CARTESIAN_POINT('',(2.9,8.855,-10.5)); +#121388 = LINE('',#121389,#121390); +#121389 = CARTESIAN_POINT('',(2.1,8.855,-10.5)); +#121390 = VECTOR('',#121391,1.); +#121391 = DIRECTION('',(1.,0.,0.)); +#121392 = ORIENTED_EDGE('',*,*,#121393,.F.); +#121393 = EDGE_CURVE('',#121394,#121384,#121396,.T.); +#121394 = VERTEX_POINT('',#121395); +#121395 = CARTESIAN_POINT('',(2.1,8.605,-10.5)); +#121396 = LINE('',#121397,#121398); +#121397 = CARTESIAN_POINT('',(2.1,8.605,-10.5)); +#121398 = VECTOR('',#121399,1.); +#121399 = DIRECTION('',(0.,1.,0.)); +#121400 = ORIENTED_EDGE('',*,*,#121401,.F.); +#121401 = EDGE_CURVE('',#121402,#121394,#121404,.T.); +#121402 = VERTEX_POINT('',#121403); +#121403 = CARTESIAN_POINT('',(2.9,8.605,-10.5)); +#121404 = LINE('',#121405,#121406); +#121405 = CARTESIAN_POINT('',(2.9,8.605,-10.5)); +#121406 = VECTOR('',#121407,1.); +#121407 = DIRECTION('',(-1.,0.,0.)); +#121408 = ORIENTED_EDGE('',*,*,#121409,.F.); +#121409 = EDGE_CURVE('',#121386,#121402,#121410,.T.); +#121410 = LINE('',#121411,#121412); +#121411 = CARTESIAN_POINT('',(2.9,8.855,-10.5)); +#121412 = VECTOR('',#121413,1.); +#121413 = DIRECTION('',(0.,-1.,0.)); +#121414 = FACE_BOUND('',#121415,.T.); +#121415 = EDGE_LOOP('',(#121416,#121426,#121434,#121442)); +#121416 = ORIENTED_EDGE('',*,*,#121417,.F.); +#121417 = EDGE_CURVE('',#121418,#121420,#121422,.T.); +#121418 = VERTEX_POINT('',#121419); +#121419 = CARTESIAN_POINT('',(-2.9,8.605,-10.5)); +#121420 = VERTEX_POINT('',#121421); +#121421 = CARTESIAN_POINT('',(-2.9,8.855,-10.5)); +#121422 = LINE('',#121423,#121424); +#121423 = CARTESIAN_POINT('',(-2.9,8.605,-10.5)); +#121424 = VECTOR('',#121425,1.); +#121425 = DIRECTION('',(0.,1.,0.)); +#121426 = ORIENTED_EDGE('',*,*,#121427,.F.); +#121427 = EDGE_CURVE('',#121428,#121418,#121430,.T.); +#121428 = VERTEX_POINT('',#121429); +#121429 = CARTESIAN_POINT('',(-2.1,8.605,-10.5)); +#121430 = LINE('',#121431,#121432); +#121431 = CARTESIAN_POINT('',(-2.1,8.605,-10.5)); +#121432 = VECTOR('',#121433,1.); +#121433 = DIRECTION('',(-1.,0.,0.)); +#121434 = ORIENTED_EDGE('',*,*,#121435,.F.); +#121435 = EDGE_CURVE('',#121436,#121428,#121438,.T.); +#121436 = VERTEX_POINT('',#121437); +#121437 = CARTESIAN_POINT('',(-2.1,8.855,-10.5)); +#121438 = LINE('',#121439,#121440); +#121439 = CARTESIAN_POINT('',(-2.1,8.855,-10.5)); +#121440 = VECTOR('',#121441,1.); +#121441 = DIRECTION('',(0.,-1.,0.)); +#121442 = ORIENTED_EDGE('',*,*,#121443,.F.); +#121443 = EDGE_CURVE('',#121420,#121436,#121444,.T.); +#121444 = LINE('',#121445,#121446); +#121445 = CARTESIAN_POINT('',(-2.9,8.855,-10.5)); +#121446 = VECTOR('',#121447,1.); +#121447 = DIRECTION('',(1.,0.,0.)); +#121448 = PLANE('',#121449); +#121449 = AXIS2_PLACEMENT_3D('',#121450,#121451,#121452); +#121450 = CARTESIAN_POINT('',(-4.75,7.775,-10.5)); +#121451 = DIRECTION('',(0.,0.,-1.)); +#121452 = DIRECTION('',(0.,-1.,0.)); +#121453 = ADVANCED_FACE('',(#121454),#121480,.T.); +#121454 = FACE_BOUND('',#121455,.T.); +#121455 = EDGE_LOOP('',(#121456,#121464,#121465,#121473)); +#121456 = ORIENTED_EDGE('',*,*,#121457,.F.); +#121457 = EDGE_CURVE('',#121420,#121458,#121460,.T.); +#121458 = VERTEX_POINT('',#121459); +#121459 = CARTESIAN_POINT('',(-2.9,8.855,-13.2)); +#121460 = LINE('',#121461,#121462); +#121461 = CARTESIAN_POINT('',(-2.9,8.855,-10.5)); +#121462 = VECTOR('',#121463,1.); +#121463 = DIRECTION('',(0.,0.,-1.)); +#121464 = ORIENTED_EDGE('',*,*,#121443,.T.); +#121465 = ORIENTED_EDGE('',*,*,#121466,.T.); +#121466 = EDGE_CURVE('',#121436,#121467,#121469,.T.); +#121467 = VERTEX_POINT('',#121468); +#121468 = CARTESIAN_POINT('',(-2.1,8.855,-13.2)); +#121469 = LINE('',#121470,#121471); +#121470 = CARTESIAN_POINT('',(-2.1,8.855,-10.5)); +#121471 = VECTOR('',#121472,1.); +#121472 = DIRECTION('',(0.,0.,-1.)); +#121473 = ORIENTED_EDGE('',*,*,#121474,.T.); +#121474 = EDGE_CURVE('',#121467,#121458,#121475,.T.); +#121475 = CIRCLE('',#121476,0.4); +#121476 = AXIS2_PLACEMENT_3D('',#121477,#121478,#121479); +#121477 = CARTESIAN_POINT('',(-2.5,8.855,-13.2)); +#121478 = DIRECTION('',(-0.,1.,0.)); +#121479 = DIRECTION('',(1.,0.,0.)); +#121480 = PLANE('',#121481); +#121481 = AXIS2_PLACEMENT_3D('',#121482,#121483,#121484); +#121482 = CARTESIAN_POINT('',(-2.9,8.855,-10.5)); +#121483 = DIRECTION('',(-0.,1.,0.)); +#121484 = DIRECTION('',(1.,0.,0.)); +#121485 = ADVANCED_FACE('',(#121486),#121512,.T.); +#121486 = FACE_BOUND('',#121487,.T.); +#121487 = EDGE_LOOP('',(#121488,#121496,#121505,#121511)); +#121488 = ORIENTED_EDGE('',*,*,#121489,.F.); +#121489 = EDGE_CURVE('',#121490,#121467,#121492,.T.); +#121490 = VERTEX_POINT('',#121491); +#121491 = CARTESIAN_POINT('',(-2.1,8.605,-13.2)); +#121492 = LINE('',#121493,#121494); +#121493 = CARTESIAN_POINT('',(-2.1,8.605,-13.2)); +#121494 = VECTOR('',#121495,1.); +#121495 = DIRECTION('',(0.,1.,0.)); +#121496 = ORIENTED_EDGE('',*,*,#121497,.F.); +#121497 = EDGE_CURVE('',#121498,#121490,#121500,.T.); +#121498 = VERTEX_POINT('',#121499); +#121499 = CARTESIAN_POINT('',(-2.9,8.605,-13.2)); +#121500 = CIRCLE('',#121501,0.4); +#121501 = AXIS2_PLACEMENT_3D('',#121502,#121503,#121504); +#121502 = CARTESIAN_POINT('',(-2.5,8.605,-13.2)); +#121503 = DIRECTION('',(0.,-1.,0.)); +#121504 = DIRECTION('',(-1.,0.,0.)); +#121505 = ORIENTED_EDGE('',*,*,#121506,.T.); +#121506 = EDGE_CURVE('',#121498,#121458,#121507,.T.); +#121507 = LINE('',#121508,#121509); +#121508 = CARTESIAN_POINT('',(-2.9,8.605,-13.2)); +#121509 = VECTOR('',#121510,1.); +#121510 = DIRECTION('',(0.,1.,0.)); +#121511 = ORIENTED_EDGE('',*,*,#121474,.F.); +#121512 = CYLINDRICAL_SURFACE('',#121513,0.4); +#121513 = AXIS2_PLACEMENT_3D('',#121514,#121515,#121516); +#121514 = CARTESIAN_POINT('',(-2.5,2.50125,-13.2)); +#121515 = DIRECTION('',(0.,1.,0.)); +#121516 = DIRECTION('',(-1.,0.,0.)); +#121517 = ADVANCED_FACE('',(#121518),#121529,.T.); +#121518 = FACE_BOUND('',#121519,.T.); +#121519 = EDGE_LOOP('',(#121520,#121526,#121527,#121528)); +#121520 = ORIENTED_EDGE('',*,*,#121521,.F.); +#121521 = EDGE_CURVE('',#121418,#121498,#121522,.T.); +#121522 = LINE('',#121523,#121524); +#121523 = CARTESIAN_POINT('',(-2.9,8.605,-10.5)); +#121524 = VECTOR('',#121525,1.); +#121525 = DIRECTION('',(0.,0.,-1.)); +#121526 = ORIENTED_EDGE('',*,*,#121417,.T.); +#121527 = ORIENTED_EDGE('',*,*,#121457,.T.); +#121528 = ORIENTED_EDGE('',*,*,#121506,.F.); +#121529 = PLANE('',#121530); +#121530 = AXIS2_PLACEMENT_3D('',#121531,#121532,#121533); +#121531 = CARTESIAN_POINT('',(-2.9,8.605,-10.5)); +#121532 = DIRECTION('',(-1.,0.,0.)); +#121533 = DIRECTION('',(0.,0.,1.)); +#121534 = ADVANCED_FACE('',(#121535),#121546,.T.); +#121535 = FACE_BOUND('',#121536,.T.); +#121536 = EDGE_LOOP('',(#121537,#121543,#121544,#121545)); +#121537 = ORIENTED_EDGE('',*,*,#121538,.F.); +#121538 = EDGE_CURVE('',#121428,#121490,#121539,.T.); +#121539 = LINE('',#121540,#121541); +#121540 = CARTESIAN_POINT('',(-2.1,8.605,-10.5)); +#121541 = VECTOR('',#121542,1.); +#121542 = DIRECTION('',(0.,0.,-1.)); +#121543 = ORIENTED_EDGE('',*,*,#121427,.T.); +#121544 = ORIENTED_EDGE('',*,*,#121521,.T.); +#121545 = ORIENTED_EDGE('',*,*,#121497,.T.); +#121546 = PLANE('',#121547); +#121547 = AXIS2_PLACEMENT_3D('',#121548,#121549,#121550); +#121548 = CARTESIAN_POINT('',(-2.1,8.605,-10.5)); +#121549 = DIRECTION('',(0.,-1.,0.)); +#121550 = DIRECTION('',(0.,0.,-1.)); +#121551 = ADVANCED_FACE('',(#121552),#121558,.T.); +#121552 = FACE_BOUND('',#121553,.T.); +#121553 = EDGE_LOOP('',(#121554,#121555,#121556,#121557)); +#121554 = ORIENTED_EDGE('',*,*,#121466,.F.); +#121555 = ORIENTED_EDGE('',*,*,#121435,.T.); +#121556 = ORIENTED_EDGE('',*,*,#121538,.T.); +#121557 = ORIENTED_EDGE('',*,*,#121489,.T.); +#121558 = PLANE('',#121559); +#121559 = AXIS2_PLACEMENT_3D('',#121560,#121561,#121562); +#121560 = CARTESIAN_POINT('',(-2.1,8.855,-10.5)); +#121561 = DIRECTION('',(1.,0.,0.)); +#121562 = DIRECTION('',(-0.,1.,0.)); +#121563 = ADVANCED_FACE('',(#121564),#121590,.T.); +#121564 = FACE_BOUND('',#121565,.T.); +#121565 = EDGE_LOOP('',(#121566,#121574,#121575,#121583)); +#121566 = ORIENTED_EDGE('',*,*,#121567,.F.); +#121567 = EDGE_CURVE('',#121352,#121568,#121570,.T.); +#121568 = VERTEX_POINT('',#121569); +#121569 = CARTESIAN_POINT('',(-0.4,8.855,-13.2)); +#121570 = LINE('',#121571,#121572); +#121571 = CARTESIAN_POINT('',(-0.4,8.855,-10.5)); +#121572 = VECTOR('',#121573,1.); +#121573 = DIRECTION('',(0.,0.,-1.)); +#121574 = ORIENTED_EDGE('',*,*,#121375,.T.); +#121575 = ORIENTED_EDGE('',*,*,#121576,.T.); +#121576 = EDGE_CURVE('',#121368,#121577,#121579,.T.); +#121577 = VERTEX_POINT('',#121578); +#121578 = CARTESIAN_POINT('',(0.4,8.855,-13.2)); +#121579 = LINE('',#121580,#121581); +#121580 = CARTESIAN_POINT('',(0.4,8.855,-10.5)); +#121581 = VECTOR('',#121582,1.); +#121582 = DIRECTION('',(0.,0.,-1.)); +#121583 = ORIENTED_EDGE('',*,*,#121584,.T.); +#121584 = EDGE_CURVE('',#121577,#121568,#121585,.T.); +#121585 = CIRCLE('',#121586,0.4); +#121586 = AXIS2_PLACEMENT_3D('',#121587,#121588,#121589); +#121587 = CARTESIAN_POINT('',(0.,8.855,-13.2)); +#121588 = DIRECTION('',(-0.,1.,0.)); +#121589 = DIRECTION('',(1.,0.,0.)); +#121590 = PLANE('',#121591); +#121591 = AXIS2_PLACEMENT_3D('',#121592,#121593,#121594); +#121592 = CARTESIAN_POINT('',(-0.4,8.855,-10.5)); +#121593 = DIRECTION('',(-0.,1.,0.)); +#121594 = DIRECTION('',(1.,0.,0.)); +#121595 = ADVANCED_FACE('',(#121596),#121622,.T.); +#121596 = FACE_BOUND('',#121597,.T.); +#121597 = EDGE_LOOP('',(#121598,#121606,#121615,#121621)); +#121598 = ORIENTED_EDGE('',*,*,#121599,.F.); +#121599 = EDGE_CURVE('',#121600,#121577,#121602,.T.); +#121600 = VERTEX_POINT('',#121601); +#121601 = CARTESIAN_POINT('',(0.4,8.605,-13.2)); +#121602 = LINE('',#121603,#121604); +#121603 = CARTESIAN_POINT('',(0.4,8.605,-13.2)); +#121604 = VECTOR('',#121605,1.); +#121605 = DIRECTION('',(0.,1.,0.)); +#121606 = ORIENTED_EDGE('',*,*,#121607,.F.); +#121607 = EDGE_CURVE('',#121608,#121600,#121610,.T.); +#121608 = VERTEX_POINT('',#121609); +#121609 = CARTESIAN_POINT('',(-0.4,8.605,-13.2)); +#121610 = CIRCLE('',#121611,0.4); +#121611 = AXIS2_PLACEMENT_3D('',#121612,#121613,#121614); +#121612 = CARTESIAN_POINT('',(0.,8.605,-13.2)); +#121613 = DIRECTION('',(0.,-1.,0.)); +#121614 = DIRECTION('',(-1.,0.,0.)); +#121615 = ORIENTED_EDGE('',*,*,#121616,.T.); +#121616 = EDGE_CURVE('',#121608,#121568,#121617,.T.); +#121617 = LINE('',#121618,#121619); +#121618 = CARTESIAN_POINT('',(-0.4,8.605,-13.2)); +#121619 = VECTOR('',#121620,1.); +#121620 = DIRECTION('',(0.,1.,0.)); +#121621 = ORIENTED_EDGE('',*,*,#121584,.F.); +#121622 = CYLINDRICAL_SURFACE('',#121623,0.4); +#121623 = AXIS2_PLACEMENT_3D('',#121624,#121625,#121626); +#121624 = CARTESIAN_POINT('',(0.,2.50125,-13.2)); +#121625 = DIRECTION('',(0.,1.,0.)); +#121626 = DIRECTION('',(-1.,0.,0.)); +#121627 = ADVANCED_FACE('',(#121628),#121639,.T.); +#121628 = FACE_BOUND('',#121629,.T.); +#121629 = EDGE_LOOP('',(#121630,#121636,#121637,#121638)); +#121630 = ORIENTED_EDGE('',*,*,#121631,.F.); +#121631 = EDGE_CURVE('',#121350,#121608,#121632,.T.); +#121632 = LINE('',#121633,#121634); +#121633 = CARTESIAN_POINT('',(-0.4,8.605,-10.5)); +#121634 = VECTOR('',#121635,1.); +#121635 = DIRECTION('',(0.,0.,-1.)); +#121636 = ORIENTED_EDGE('',*,*,#121349,.T.); +#121637 = ORIENTED_EDGE('',*,*,#121567,.T.); +#121638 = ORIENTED_EDGE('',*,*,#121616,.F.); +#121639 = PLANE('',#121640); +#121640 = AXIS2_PLACEMENT_3D('',#121641,#121642,#121643); +#121641 = CARTESIAN_POINT('',(-0.4,8.605,-10.5)); +#121642 = DIRECTION('',(-1.,0.,0.)); +#121643 = DIRECTION('',(0.,0.,1.)); +#121644 = ADVANCED_FACE('',(#121645),#121656,.T.); +#121645 = FACE_BOUND('',#121646,.T.); +#121646 = EDGE_LOOP('',(#121647,#121653,#121654,#121655)); +#121647 = ORIENTED_EDGE('',*,*,#121648,.F.); +#121648 = EDGE_CURVE('',#121360,#121600,#121649,.T.); +#121649 = LINE('',#121650,#121651); +#121650 = CARTESIAN_POINT('',(0.4,8.605,-10.5)); +#121651 = VECTOR('',#121652,1.); +#121652 = DIRECTION('',(0.,0.,-1.)); +#121653 = ORIENTED_EDGE('',*,*,#121359,.T.); +#121654 = ORIENTED_EDGE('',*,*,#121631,.T.); +#121655 = ORIENTED_EDGE('',*,*,#121607,.T.); +#121656 = PLANE('',#121657); +#121657 = AXIS2_PLACEMENT_3D('',#121658,#121659,#121660); +#121658 = CARTESIAN_POINT('',(0.4,8.605,-10.5)); +#121659 = DIRECTION('',(0.,-1.,0.)); +#121660 = DIRECTION('',(0.,0.,-1.)); +#121661 = ADVANCED_FACE('',(#121662),#121668,.T.); +#121662 = FACE_BOUND('',#121663,.T.); +#121663 = EDGE_LOOP('',(#121664,#121665,#121666,#121667)); +#121664 = ORIENTED_EDGE('',*,*,#121576,.F.); +#121665 = ORIENTED_EDGE('',*,*,#121367,.T.); +#121666 = ORIENTED_EDGE('',*,*,#121648,.T.); +#121667 = ORIENTED_EDGE('',*,*,#121599,.T.); +#121668 = PLANE('',#121669); +#121669 = AXIS2_PLACEMENT_3D('',#121670,#121671,#121672); +#121670 = CARTESIAN_POINT('',(0.4,8.855,-10.5)); +#121671 = DIRECTION('',(1.,0.,0.)); +#121672 = DIRECTION('',(-0.,1.,0.)); +#121673 = ADVANCED_FACE('',(#121674),#121699,.T.); +#121674 = FACE_BOUND('',#121675,.T.); +#121675 = EDGE_LOOP('',(#121676,#121684,#121685,#121693)); +#121676 = ORIENTED_EDGE('',*,*,#121677,.F.); +#121677 = EDGE_CURVE('',#121386,#121678,#121680,.T.); +#121678 = VERTEX_POINT('',#121679); +#121679 = CARTESIAN_POINT('',(2.9,8.855,-13.2)); +#121680 = LINE('',#121681,#121682); +#121681 = CARTESIAN_POINT('',(2.9,8.855,-10.5)); +#121682 = VECTOR('',#121683,1.); +#121683 = DIRECTION('',(0.,0.,-1.)); +#121684 = ORIENTED_EDGE('',*,*,#121409,.T.); +#121685 = ORIENTED_EDGE('',*,*,#121686,.T.); +#121686 = EDGE_CURVE('',#121402,#121687,#121689,.T.); +#121687 = VERTEX_POINT('',#121688); +#121688 = CARTESIAN_POINT('',(2.9,8.605,-13.2)); +#121689 = LINE('',#121690,#121691); +#121690 = CARTESIAN_POINT('',(2.9,8.605,-10.5)); +#121691 = VECTOR('',#121692,1.); +#121692 = DIRECTION('',(0.,0.,-1.)); +#121693 = ORIENTED_EDGE('',*,*,#121694,.F.); +#121694 = EDGE_CURVE('',#121678,#121687,#121695,.T.); +#121695 = LINE('',#121696,#121697); +#121696 = CARTESIAN_POINT('',(2.9,8.855,-13.2)); +#121697 = VECTOR('',#121698,1.); +#121698 = DIRECTION('',(0.,-1.,0.)); +#121699 = PLANE('',#121700); +#121700 = AXIS2_PLACEMENT_3D('',#121701,#121702,#121703); +#121701 = CARTESIAN_POINT('',(2.9,8.855,-10.5)); +#121702 = DIRECTION('',(1.,0.,0.)); +#121703 = DIRECTION('',(-0.,1.,0.)); +#121704 = ADVANCED_FACE('',(#121705),#121732,.T.); +#121705 = FACE_BOUND('',#121706,.T.); +#121706 = EDGE_LOOP('',(#121707,#121717,#121724,#121725)); +#121707 = ORIENTED_EDGE('',*,*,#121708,.F.); +#121708 = EDGE_CURVE('',#121709,#121711,#121713,.T.); +#121709 = VERTEX_POINT('',#121710); +#121710 = CARTESIAN_POINT('',(2.1,8.855,-13.2)); +#121711 = VERTEX_POINT('',#121712); +#121712 = CARTESIAN_POINT('',(2.1,8.605,-13.2)); +#121713 = LINE('',#121714,#121715); +#121714 = CARTESIAN_POINT('',(2.1,8.855,-13.2)); +#121715 = VECTOR('',#121716,1.); +#121716 = DIRECTION('',(0.,-1.,0.)); +#121717 = ORIENTED_EDGE('',*,*,#121718,.F.); +#121718 = EDGE_CURVE('',#121678,#121709,#121719,.T.); +#121719 = CIRCLE('',#121720,0.4); +#121720 = AXIS2_PLACEMENT_3D('',#121721,#121722,#121723); +#121721 = CARTESIAN_POINT('',(2.5,8.855,-13.2)); +#121722 = DIRECTION('',(-0.,1.,0.)); +#121723 = DIRECTION('',(1.,0.,0.)); +#121724 = ORIENTED_EDGE('',*,*,#121694,.T.); +#121725 = ORIENTED_EDGE('',*,*,#121726,.F.); +#121726 = EDGE_CURVE('',#121711,#121687,#121727,.T.); +#121727 = CIRCLE('',#121728,0.4); +#121728 = AXIS2_PLACEMENT_3D('',#121729,#121730,#121731); +#121729 = CARTESIAN_POINT('',(2.5,8.605,-13.2)); +#121730 = DIRECTION('',(0.,-1.,0.)); +#121731 = DIRECTION('',(-1.,0.,0.)); +#121732 = CYLINDRICAL_SURFACE('',#121733,0.4); +#121733 = AXIS2_PLACEMENT_3D('',#121734,#121735,#121736); +#121734 = CARTESIAN_POINT('',(2.5,13.77375,-13.2)); +#121735 = DIRECTION('',(0.,-1.,0.)); +#121736 = DIRECTION('',(1.,0.,0.)); +#121737 = ADVANCED_FACE('',(#121738),#121749,.T.); +#121738 = FACE_BOUND('',#121739,.T.); +#121739 = EDGE_LOOP('',(#121740,#121741,#121742,#121748)); +#121740 = ORIENTED_EDGE('',*,*,#121686,.F.); +#121741 = ORIENTED_EDGE('',*,*,#121401,.T.); +#121742 = ORIENTED_EDGE('',*,*,#121743,.T.); +#121743 = EDGE_CURVE('',#121394,#121711,#121744,.T.); +#121744 = LINE('',#121745,#121746); +#121745 = CARTESIAN_POINT('',(2.1,8.605,-10.5)); +#121746 = VECTOR('',#121747,1.); +#121747 = DIRECTION('',(0.,0.,-1.)); +#121748 = ORIENTED_EDGE('',*,*,#121726,.T.); +#121749 = PLANE('',#121750); +#121750 = AXIS2_PLACEMENT_3D('',#121751,#121752,#121753); +#121751 = CARTESIAN_POINT('',(2.9,8.605,-10.5)); +#121752 = DIRECTION('',(0.,-1.,0.)); +#121753 = DIRECTION('',(0.,0.,-1.)); +#121754 = ADVANCED_FACE('',(#121755),#121766,.T.); +#121755 = FACE_BOUND('',#121756,.T.); +#121756 = EDGE_LOOP('',(#121757,#121758,#121759,#121765)); +#121757 = ORIENTED_EDGE('',*,*,#121743,.F.); +#121758 = ORIENTED_EDGE('',*,*,#121393,.T.); +#121759 = ORIENTED_EDGE('',*,*,#121760,.T.); +#121760 = EDGE_CURVE('',#121384,#121709,#121761,.T.); +#121761 = LINE('',#121762,#121763); +#121762 = CARTESIAN_POINT('',(2.1,8.855,-10.5)); +#121763 = VECTOR('',#121764,1.); +#121764 = DIRECTION('',(0.,0.,-1.)); +#121765 = ORIENTED_EDGE('',*,*,#121708,.T.); +#121766 = PLANE('',#121767); +#121767 = AXIS2_PLACEMENT_3D('',#121768,#121769,#121770); +#121768 = CARTESIAN_POINT('',(2.1,8.605,-10.5)); +#121769 = DIRECTION('',(-1.,0.,0.)); +#121770 = DIRECTION('',(0.,0.,1.)); +#121771 = ADVANCED_FACE('',(#121772),#121778,.T.); +#121772 = FACE_BOUND('',#121773,.T.); +#121773 = EDGE_LOOP('',(#121774,#121775,#121776,#121777)); +#121774 = ORIENTED_EDGE('',*,*,#121760,.F.); +#121775 = ORIENTED_EDGE('',*,*,#121383,.T.); +#121776 = ORIENTED_EDGE('',*,*,#121677,.T.); +#121777 = ORIENTED_EDGE('',*,*,#121718,.T.); +#121778 = PLANE('',#121779); +#121779 = AXIS2_PLACEMENT_3D('',#121780,#121781,#121782); +#121780 = CARTESIAN_POINT('',(2.1,8.855,-10.5)); +#121781 = DIRECTION('',(-0.,1.,0.)); +#121782 = DIRECTION('',(1.,0.,0.)); +#121783 = ADVANCED_FACE('',(#121784,#121790),#121810,.T.); +#121784 = FACE_BOUND('',#121785,.T.); +#121785 = EDGE_LOOP('',(#121786,#121787,#121788,#121789)); +#121786 = ORIENTED_EDGE('',*,*,#121340,.T.); +#121787 = ORIENTED_EDGE('',*,*,#121167,.T.); +#121788 = ORIENTED_EDGE('',*,*,#121198,.T.); +#121789 = ORIENTED_EDGE('',*,*,#121293,.T.); +#121790 = FACE_BOUND('',#121791,.T.); +#121791 = EDGE_LOOP('',(#121792,#121803)); +#121792 = ORIENTED_EDGE('',*,*,#121793,.F.); +#121793 = EDGE_CURVE('',#121794,#121796,#121798,.T.); +#121794 = VERTEX_POINT('',#121795); +#121795 = CARTESIAN_POINT('',(0.,9.4,-8.66725)); +#121796 = VERTEX_POINT('',#121797); +#121797 = CARTESIAN_POINT('',(0.,9.4,-10.16015)); +#121798 = CIRCLE('',#121799,0.74645); +#121799 = AXIS2_PLACEMENT_3D('',#121800,#121801,#121802); +#121800 = CARTESIAN_POINT('',(0.,9.4,-9.4137)); +#121801 = DIRECTION('',(0.,1.,0.)); +#121802 = DIRECTION('',(0.,-0.,1.)); +#121803 = ORIENTED_EDGE('',*,*,#121804,.F.); +#121804 = EDGE_CURVE('',#121796,#121794,#121805,.T.); +#121805 = CIRCLE('',#121806,0.74645); +#121806 = AXIS2_PLACEMENT_3D('',#121807,#121808,#121809); +#121807 = CARTESIAN_POINT('',(0.,9.4,-9.4137)); +#121808 = DIRECTION('',(0.,1.,0.)); +#121809 = DIRECTION('',(0.,0.,-1.)); +#121810 = PLANE('',#121811); +#121811 = AXIS2_PLACEMENT_3D('',#121812,#121813,#121814); +#121812 = CARTESIAN_POINT('',(-4.75,9.4,0.)); +#121813 = DIRECTION('',(-0.,1.,0.)); +#121814 = DIRECTION('',(1.,0.,0.)); +#121815 = ADVANCED_FACE('',(#121816),#121842,.F.); +#121816 = FACE_BOUND('',#121817,.F.); +#121817 = EDGE_LOOP('',(#121818,#121819,#121827,#121836)); +#121818 = ORIENTED_EDGE('',*,*,#121804,.F.); +#121819 = ORIENTED_EDGE('',*,*,#121820,.T.); +#121820 = EDGE_CURVE('',#121796,#121821,#121823,.T.); +#121821 = VERTEX_POINT('',#121822); +#121822 = CARTESIAN_POINT('',(0.,9.2,-10.16015)); +#121823 = LINE('',#121824,#121825); +#121824 = CARTESIAN_POINT('',(0.,9.4,-10.16015)); +#121825 = VECTOR('',#121826,1.); +#121826 = DIRECTION('',(0.,-1.,0.)); +#121827 = ORIENTED_EDGE('',*,*,#121828,.T.); +#121828 = EDGE_CURVE('',#121821,#121829,#121831,.T.); +#121829 = VERTEX_POINT('',#121830); +#121830 = CARTESIAN_POINT('',(0.,9.2,-8.66725)); +#121831 = CIRCLE('',#121832,0.74645); +#121832 = AXIS2_PLACEMENT_3D('',#121833,#121834,#121835); +#121833 = CARTESIAN_POINT('',(0.,9.2,-9.4137)); +#121834 = DIRECTION('',(0.,1.,0.)); +#121835 = DIRECTION('',(0.,0.,-1.)); +#121836 = ORIENTED_EDGE('',*,*,#121837,.F.); +#121837 = EDGE_CURVE('',#121794,#121829,#121838,.T.); +#121838 = LINE('',#121839,#121840); +#121839 = CARTESIAN_POINT('',(0.,9.4,-8.66725)); +#121840 = VECTOR('',#121841,1.); +#121841 = DIRECTION('',(0.,-1.,0.)); +#121842 = CYLINDRICAL_SURFACE('',#121843,0.74645); +#121843 = AXIS2_PLACEMENT_3D('',#121844,#121845,#121846); +#121844 = CARTESIAN_POINT('',(0.,9.4,-9.4137)); +#121845 = DIRECTION('',(0.,1.,0.)); +#121846 = DIRECTION('',(0.,0.,-1.)); +#121847 = ADVANCED_FACE('',(#121848),#121860,.F.); +#121848 = FACE_BOUND('',#121849,.F.); +#121849 = EDGE_LOOP('',(#121850,#121851,#121852,#121859)); +#121850 = ORIENTED_EDGE('',*,*,#121793,.F.); +#121851 = ORIENTED_EDGE('',*,*,#121837,.T.); +#121852 = ORIENTED_EDGE('',*,*,#121853,.T.); +#121853 = EDGE_CURVE('',#121829,#121821,#121854,.T.); +#121854 = CIRCLE('',#121855,0.74645); +#121855 = AXIS2_PLACEMENT_3D('',#121856,#121857,#121858); +#121856 = CARTESIAN_POINT('',(0.,9.2,-9.4137)); +#121857 = DIRECTION('',(0.,1.,0.)); +#121858 = DIRECTION('',(0.,-0.,1.)); +#121859 = ORIENTED_EDGE('',*,*,#121820,.F.); +#121860 = CYLINDRICAL_SURFACE('',#121861,0.74645); +#121861 = AXIS2_PLACEMENT_3D('',#121862,#121863,#121864); +#121862 = CARTESIAN_POINT('',(0.,9.4,-9.4137)); +#121863 = DIRECTION('',(0.,1.,0.)); +#121864 = DIRECTION('',(0.,0.,-1.)); +#121865 = ADVANCED_FACE('',(#121866),#121870,.T.); +#121866 = FACE_BOUND('',#121867,.T.); +#121867 = EDGE_LOOP('',(#121868,#121869)); +#121868 = ORIENTED_EDGE('',*,*,#121853,.T.); +#121869 = ORIENTED_EDGE('',*,*,#121828,.T.); +#121870 = PLANE('',#121871); +#121871 = AXIS2_PLACEMENT_3D('',#121872,#121873,#121874); +#121872 = CARTESIAN_POINT('',(-4.75,9.2,0.)); +#121873 = DIRECTION('',(-0.,1.,0.)); +#121874 = DIRECTION('',(1.,0.,0.)); +#121875 = ADVANCED_FACE('',(#121876),#121894,.T.); +#121876 = FACE_BOUND('',#121877,.T.); +#121877 = EDGE_LOOP('',(#121878,#121879,#121887,#121893)); +#121878 = ORIENTED_EDGE('',*,*,#121332,.T.); +#121879 = ORIENTED_EDGE('',*,*,#121880,.F.); +#121880 = EDGE_CURVE('',#121881,#121325,#121883,.T.); +#121881 = VERTEX_POINT('',#121882); +#121882 = CARTESIAN_POINT('',(4.75,7.775,-8.6)); +#121883 = LINE('',#121884,#121885); +#121884 = CARTESIAN_POINT('',(4.75,7.775,-8.6)); +#121885 = VECTOR('',#121886,1.); +#121886 = DIRECTION('',(0.,0.,-1.)); +#121887 = ORIENTED_EDGE('',*,*,#121888,.F.); +#121888 = EDGE_CURVE('',#121050,#121881,#121889,.T.); +#121889 = LINE('',#121890,#121891); +#121890 = CARTESIAN_POINT('',(-4.75,7.775,-8.6)); +#121891 = VECTOR('',#121892,1.); +#121892 = DIRECTION('',(1.,0.,0.)); +#121893 = ORIENTED_EDGE('',*,*,#121049,.T.); +#121894 = PLANE('',#121895); +#121895 = AXIS2_PLACEMENT_3D('',#121896,#121897,#121898); +#121896 = CARTESIAN_POINT('',(-4.75,7.775,-8.6)); +#121897 = DIRECTION('',(0.,-1.,0.)); +#121898 = DIRECTION('',(0.,0.,-1.)); +#121899 = ADVANCED_FACE('',(#121900),#121918,.T.); +#121900 = FACE_BOUND('',#121901,.T.); +#121901 = EDGE_LOOP('',(#121902,#121903,#121911,#121917)); +#121902 = ORIENTED_EDGE('',*,*,#121888,.T.); +#121903 = ORIENTED_EDGE('',*,*,#121904,.F.); +#121904 = EDGE_CURVE('',#121905,#121881,#121907,.T.); +#121905 = VERTEX_POINT('',#121906); +#121906 = CARTESIAN_POINT('',(4.75,6.575,-8.6)); +#121907 = LINE('',#121908,#121909); +#121908 = CARTESIAN_POINT('',(4.75,6.575,-8.6)); +#121909 = VECTOR('',#121910,1.); +#121910 = DIRECTION('',(0.,1.,0.)); +#121911 = ORIENTED_EDGE('',*,*,#121912,.F.); +#121912 = EDGE_CURVE('',#121058,#121905,#121913,.T.); +#121913 = LINE('',#121914,#121915); +#121914 = CARTESIAN_POINT('',(-4.75,6.575,-8.6)); +#121915 = VECTOR('',#121916,1.); +#121916 = DIRECTION('',(1.,0.,0.)); +#121917 = ORIENTED_EDGE('',*,*,#121057,.T.); +#121918 = PLANE('',#121919); +#121919 = AXIS2_PLACEMENT_3D('',#121920,#121921,#121922); +#121920 = CARTESIAN_POINT('',(-4.75,6.575,-8.6)); +#121921 = DIRECTION('',(0.,0.,-1.)); +#121922 = DIRECTION('',(0.,-1.,0.)); +#121923 = ADVANCED_FACE('',(#121924),#122070,.T.); +#121924 = FACE_BOUND('',#121925,.T.); +#121925 = EDGE_LOOP('',(#121926,#121934,#121935,#121936,#121944,#121952, + #121960,#121968,#121976,#121984,#121992,#122000,#122008,#122017, + #122025,#122032,#122033,#122041,#122049,#122055,#122056,#122064)); +#121926 = ORIENTED_EDGE('',*,*,#121927,.F.); +#121927 = EDGE_CURVE('',#121066,#121928,#121930,.T.); +#121928 = VERTEX_POINT('',#121929); +#121929 = CARTESIAN_POINT('',(-4.45,6.575,-6.8096)); +#121930 = LINE('',#121931,#121932); +#121931 = CARTESIAN_POINT('',(-4.75,6.575,-6.8096)); +#121932 = VECTOR('',#121933,1.); +#121933 = DIRECTION('',(1.,0.,0.)); +#121934 = ORIENTED_EDGE('',*,*,#121065,.T.); +#121935 = ORIENTED_EDGE('',*,*,#121912,.T.); +#121936 = ORIENTED_EDGE('',*,*,#121937,.F.); +#121937 = EDGE_CURVE('',#121938,#121905,#121940,.T.); +#121938 = VERTEX_POINT('',#121939); +#121939 = CARTESIAN_POINT('',(4.75,6.575,-6.8096)); +#121940 = LINE('',#121941,#121942); +#121941 = CARTESIAN_POINT('',(4.75,6.575,-6.8096)); +#121942 = VECTOR('',#121943,1.); +#121943 = DIRECTION('',(0.,0.,-1.)); +#121944 = ORIENTED_EDGE('',*,*,#121945,.T.); +#121945 = EDGE_CURVE('',#121938,#121946,#121948,.T.); +#121946 = VERTEX_POINT('',#121947); +#121947 = CARTESIAN_POINT('',(4.45,6.575,-6.8096)); +#121948 = LINE('',#121949,#121950); +#121949 = CARTESIAN_POINT('',(4.75,6.575,-6.8096)); +#121950 = VECTOR('',#121951,1.); +#121951 = DIRECTION('',(-1.,0.,0.)); +#121952 = ORIENTED_EDGE('',*,*,#121953,.T.); +#121953 = EDGE_CURVE('',#121946,#121954,#121956,.T.); +#121954 = VERTEX_POINT('',#121955); +#121955 = CARTESIAN_POINT('',(4.45,6.575,-6.5096)); +#121956 = LINE('',#121957,#121958); +#121957 = CARTESIAN_POINT('',(4.45,6.575,-6.8096)); +#121958 = VECTOR('',#121959,1.); +#121959 = DIRECTION('',(0.,0.,1.)); +#121960 = ORIENTED_EDGE('',*,*,#121961,.F.); +#121961 = EDGE_CURVE('',#121962,#121954,#121964,.T.); +#121962 = VERTEX_POINT('',#121963); +#121963 = CARTESIAN_POINT('',(4.75,6.575,-6.5096)); +#121964 = LINE('',#121965,#121966); +#121965 = CARTESIAN_POINT('',(4.75,6.575,-6.5096)); +#121966 = VECTOR('',#121967,1.); +#121967 = DIRECTION('',(-1.,0.,0.)); +#121968 = ORIENTED_EDGE('',*,*,#121969,.F.); +#121969 = EDGE_CURVE('',#121970,#121962,#121972,.T.); +#121970 = VERTEX_POINT('',#121971); +#121971 = CARTESIAN_POINT('',(4.75,6.575,-2.9904)); +#121972 = LINE('',#121973,#121974); +#121973 = CARTESIAN_POINT('',(4.75,6.575,-2.9904)); +#121974 = VECTOR('',#121975,1.); +#121975 = DIRECTION('',(0.,0.,-1.)); +#121976 = ORIENTED_EDGE('',*,*,#121977,.T.); +#121977 = EDGE_CURVE('',#121970,#121978,#121980,.T.); +#121978 = VERTEX_POINT('',#121979); +#121979 = CARTESIAN_POINT('',(4.45,6.575,-2.9904)); +#121980 = LINE('',#121981,#121982); +#121981 = CARTESIAN_POINT('',(4.75,6.575,-2.9904)); +#121982 = VECTOR('',#121983,1.); +#121983 = DIRECTION('',(-1.,0.,0.)); +#121984 = ORIENTED_EDGE('',*,*,#121985,.T.); +#121985 = EDGE_CURVE('',#121978,#121986,#121988,.T.); +#121986 = VERTEX_POINT('',#121987); +#121987 = CARTESIAN_POINT('',(4.45,6.575,-2.6904)); +#121988 = LINE('',#121989,#121990); +#121989 = CARTESIAN_POINT('',(4.45,6.575,-2.9904)); +#121990 = VECTOR('',#121991,1.); +#121991 = DIRECTION('',(0.,0.,1.)); +#121992 = ORIENTED_EDGE('',*,*,#121993,.F.); +#121993 = EDGE_CURVE('',#121994,#121986,#121996,.T.); +#121994 = VERTEX_POINT('',#121995); +#121995 = CARTESIAN_POINT('',(4.75,6.575,-2.6904)); +#121996 = LINE('',#121997,#121998); +#121997 = CARTESIAN_POINT('',(4.75,6.575,-2.6904)); +#121998 = VECTOR('',#121999,1.); +#121999 = DIRECTION('',(-1.,0.,0.)); +#122000 = ORIENTED_EDGE('',*,*,#122001,.F.); +#122001 = EDGE_CURVE('',#122002,#121994,#122004,.T.); +#122002 = VERTEX_POINT('',#122003); +#122003 = CARTESIAN_POINT('',(4.75,6.575,-2.5)); +#122004 = LINE('',#122005,#122006); +#122005 = CARTESIAN_POINT('',(4.75,6.575,-2.5)); +#122006 = VECTOR('',#122007,1.); +#122007 = DIRECTION('',(0.,0.,-1.)); +#122008 = ORIENTED_EDGE('',*,*,#122009,.T.); +#122009 = EDGE_CURVE('',#122002,#122010,#122012,.T.); +#122010 = VERTEX_POINT('',#122011); +#122011 = CARTESIAN_POINT('',(2.15,6.575,0.1)); +#122012 = CIRCLE('',#122013,2.6); +#122013 = AXIS2_PLACEMENT_3D('',#122014,#122015,#122016); +#122014 = CARTESIAN_POINT('',(2.15,6.575,-2.5)); +#122015 = DIRECTION('',(0.,-1.,0.)); +#122016 = DIRECTION('',(1.,0.,0.)); +#122017 = ORIENTED_EDGE('',*,*,#122018,.F.); +#122018 = EDGE_CURVE('',#122019,#122010,#122021,.T.); +#122019 = VERTEX_POINT('',#122020); +#122020 = CARTESIAN_POINT('',(-2.15,6.575,0.1)); +#122021 = LINE('',#122022,#122023); +#122022 = CARTESIAN_POINT('',(-2.15,6.575,0.1)); +#122023 = VECTOR('',#122024,1.); +#122024 = DIRECTION('',(1.,0.,0.)); +#122025 = ORIENTED_EDGE('',*,*,#122026,.T.); +#122026 = EDGE_CURVE('',#122019,#121130,#122027,.T.); +#122027 = CIRCLE('',#122028,2.6); +#122028 = AXIS2_PLACEMENT_3D('',#122029,#122030,#122031); +#122029 = CARTESIAN_POINT('',(-2.15,6.575,-2.5)); +#122030 = DIRECTION('',(0.,-1.,0.)); +#122031 = DIRECTION('',(0.,0.,1.)); +#122032 = ORIENTED_EDGE('',*,*,#121129,.T.); +#122033 = ORIENTED_EDGE('',*,*,#122034,.T.); +#122034 = EDGE_CURVE('',#121122,#122035,#122037,.T.); +#122035 = VERTEX_POINT('',#122036); +#122036 = CARTESIAN_POINT('',(-4.45,6.575,-2.6904)); +#122037 = LINE('',#122038,#122039); +#122038 = CARTESIAN_POINT('',(-4.75,6.575,-2.6904)); +#122039 = VECTOR('',#122040,1.); +#122040 = DIRECTION('',(1.,0.,0.)); +#122041 = ORIENTED_EDGE('',*,*,#122042,.F.); +#122042 = EDGE_CURVE('',#122043,#122035,#122045,.T.); +#122043 = VERTEX_POINT('',#122044); +#122044 = CARTESIAN_POINT('',(-4.45,6.575,-2.9904)); +#122045 = LINE('',#122046,#122047); +#122046 = CARTESIAN_POINT('',(-4.45,6.575,-2.9904)); +#122047 = VECTOR('',#122048,1.); +#122048 = DIRECTION('',(0.,0.,1.)); +#122049 = ORIENTED_EDGE('',*,*,#122050,.F.); +#122050 = EDGE_CURVE('',#121098,#122043,#122051,.T.); +#122051 = LINE('',#122052,#122053); +#122052 = CARTESIAN_POINT('',(-4.75,6.575,-2.9904)); +#122053 = VECTOR('',#122054,1.); +#122054 = DIRECTION('',(1.,0.,0.)); +#122055 = ORIENTED_EDGE('',*,*,#121097,.T.); +#122056 = ORIENTED_EDGE('',*,*,#122057,.T.); +#122057 = EDGE_CURVE('',#121090,#122058,#122060,.T.); +#122058 = VERTEX_POINT('',#122059); +#122059 = CARTESIAN_POINT('',(-4.45,6.575,-6.5096)); +#122060 = LINE('',#122061,#122062); +#122061 = CARTESIAN_POINT('',(-4.75,6.575,-6.5096)); +#122062 = VECTOR('',#122063,1.); +#122063 = DIRECTION('',(1.,0.,0.)); +#122064 = ORIENTED_EDGE('',*,*,#122065,.F.); +#122065 = EDGE_CURVE('',#121928,#122058,#122066,.T.); +#122066 = LINE('',#122067,#122068); +#122067 = CARTESIAN_POINT('',(-4.45,6.575,-6.8096)); +#122068 = VECTOR('',#122069,1.); +#122069 = DIRECTION('',(0.,0.,1.)); +#122070 = PLANE('',#122071); +#122071 = AXIS2_PLACEMENT_3D('',#122072,#122073,#122074); +#122072 = CARTESIAN_POINT('',(-4.75,6.575,0.1)); +#122073 = DIRECTION('',(0.,-1.,0.)); +#122074 = DIRECTION('',(0.,0.,-1.)); +#122075 = ADVANCED_FACE('',(#122076),#122101,.F.); +#122076 = FACE_BOUND('',#122077,.T.); +#122077 = EDGE_LOOP('',(#122078,#122079,#122087,#122095)); +#122078 = ORIENTED_EDGE('',*,*,#122042,.T.); +#122079 = ORIENTED_EDGE('',*,*,#122080,.F.); +#122080 = EDGE_CURVE('',#122081,#122035,#122083,.T.); +#122081 = VERTEX_POINT('',#122082); +#122082 = CARTESIAN_POINT('',(-4.45,7.875,-2.6904)); +#122083 = LINE('',#122084,#122085); +#122084 = CARTESIAN_POINT('',(-4.45,7.875,-2.6904)); +#122085 = VECTOR('',#122086,1.); +#122086 = DIRECTION('',(0.,-1.,0.)); +#122087 = ORIENTED_EDGE('',*,*,#122088,.F.); +#122088 = EDGE_CURVE('',#122089,#122081,#122091,.T.); +#122089 = VERTEX_POINT('',#122090); +#122090 = CARTESIAN_POINT('',(-4.45,7.875,-2.9904)); +#122091 = LINE('',#122092,#122093); +#122092 = CARTESIAN_POINT('',(-4.45,7.875,-2.9904)); +#122093 = VECTOR('',#122094,1.); +#122094 = DIRECTION('',(0.,0.,1.)); +#122095 = ORIENTED_EDGE('',*,*,#122096,.F.); +#122096 = EDGE_CURVE('',#122043,#122089,#122097,.T.); +#122097 = LINE('',#122098,#122099); +#122098 = CARTESIAN_POINT('',(-4.45,6.575,-2.9904)); +#122099 = VECTOR('',#122100,1.); +#122100 = DIRECTION('',(0.,1.,0.)); +#122101 = PLANE('',#122102); +#122102 = AXIS2_PLACEMENT_3D('',#122103,#122104,#122105); +#122103 = CARTESIAN_POINT('',(-4.45,0.,0.)); +#122104 = DIRECTION('',(1.,0.,0.)); +#122105 = DIRECTION('',(-0.,1.,0.)); +#122106 = ADVANCED_FACE('',(#122107),#122132,.F.); +#122107 = FACE_BOUND('',#122108,.T.); +#122108 = EDGE_LOOP('',(#122109,#122110,#122118,#122126)); +#122109 = ORIENTED_EDGE('',*,*,#122065,.T.); +#122110 = ORIENTED_EDGE('',*,*,#122111,.F.); +#122111 = EDGE_CURVE('',#122112,#122058,#122114,.T.); +#122112 = VERTEX_POINT('',#122113); +#122113 = CARTESIAN_POINT('',(-4.45,7.875,-6.5096)); +#122114 = LINE('',#122115,#122116); +#122115 = CARTESIAN_POINT('',(-4.45,7.875,-6.5096)); +#122116 = VECTOR('',#122117,1.); +#122117 = DIRECTION('',(0.,-1.,0.)); +#122118 = ORIENTED_EDGE('',*,*,#122119,.F.); +#122119 = EDGE_CURVE('',#122120,#122112,#122122,.T.); +#122120 = VERTEX_POINT('',#122121); +#122121 = CARTESIAN_POINT('',(-4.45,7.875,-6.8096)); +#122122 = LINE('',#122123,#122124); +#122123 = CARTESIAN_POINT('',(-4.45,7.875,-6.8096)); +#122124 = VECTOR('',#122125,1.); +#122125 = DIRECTION('',(0.,0.,1.)); +#122126 = ORIENTED_EDGE('',*,*,#122127,.F.); +#122127 = EDGE_CURVE('',#121928,#122120,#122128,.T.); +#122128 = LINE('',#122129,#122130); +#122129 = CARTESIAN_POINT('',(-4.45,6.575,-6.8096)); +#122130 = VECTOR('',#122131,1.); +#122131 = DIRECTION('',(0.,1.,0.)); +#122132 = PLANE('',#122133); +#122133 = AXIS2_PLACEMENT_3D('',#122134,#122135,#122136); +#122134 = CARTESIAN_POINT('',(-4.45,0.,0.)); +#122135 = DIRECTION('',(1.,0.,0.)); +#122136 = DIRECTION('',(-0.,1.,0.)); +#122137 = ADVANCED_FACE('',(#122138),#122149,.T.); +#122138 = FACE_BOUND('',#122139,.T.); +#122139 = EDGE_LOOP('',(#122140,#122146,#122147,#122148)); +#122140 = ORIENTED_EDGE('',*,*,#122141,.F.); +#122141 = EDGE_CURVE('',#121106,#122089,#122142,.T.); +#122142 = LINE('',#122143,#122144); +#122143 = CARTESIAN_POINT('',(-4.75,7.875,-2.9904)); +#122144 = VECTOR('',#122145,1.); +#122145 = DIRECTION('',(1.,0.,0.)); +#122146 = ORIENTED_EDGE('',*,*,#121105,.F.); +#122147 = ORIENTED_EDGE('',*,*,#122050,.T.); +#122148 = ORIENTED_EDGE('',*,*,#122096,.T.); +#122149 = PLANE('',#122150); +#122150 = AXIS2_PLACEMENT_3D('',#122151,#122152,#122153); +#122151 = CARTESIAN_POINT('',(-4.75,6.575,-2.9904)); +#122152 = DIRECTION('',(0.,0.,1.)); +#122153 = DIRECTION('',(1.,0.,-0.)); +#122154 = ADVANCED_FACE('',(#122155),#122166,.T.); +#122155 = FACE_BOUND('',#122156,.T.); +#122156 = EDGE_LOOP('',(#122157,#122158,#122164,#122165)); +#122157 = ORIENTED_EDGE('',*,*,#122088,.T.); +#122158 = ORIENTED_EDGE('',*,*,#122159,.F.); +#122159 = EDGE_CURVE('',#121114,#122081,#122160,.T.); +#122160 = LINE('',#122161,#122162); +#122161 = CARTESIAN_POINT('',(-4.75,7.875,-2.6904)); +#122162 = VECTOR('',#122163,1.); +#122163 = DIRECTION('',(1.,0.,0.)); +#122164 = ORIENTED_EDGE('',*,*,#121113,.F.); +#122165 = ORIENTED_EDGE('',*,*,#122141,.T.); +#122166 = PLANE('',#122167); +#122167 = AXIS2_PLACEMENT_3D('',#122168,#122169,#122170); +#122168 = CARTESIAN_POINT('',(-4.75,7.875,-2.9904)); +#122169 = DIRECTION('',(0.,-1.,0.)); +#122170 = DIRECTION('',(0.,0.,-1.)); +#122171 = ADVANCED_FACE('',(#122172),#122178,.T.); +#122172 = FACE_BOUND('',#122173,.T.); +#122173 = EDGE_LOOP('',(#122174,#122175,#122176,#122177)); +#122174 = ORIENTED_EDGE('',*,*,#122034,.F.); +#122175 = ORIENTED_EDGE('',*,*,#121121,.T.); +#122176 = ORIENTED_EDGE('',*,*,#122159,.T.); +#122177 = ORIENTED_EDGE('',*,*,#122080,.T.); +#122178 = PLANE('',#122179); +#122179 = AXIS2_PLACEMENT_3D('',#122180,#122181,#122182); +#122180 = CARTESIAN_POINT('',(-4.75,7.875,-2.6904)); +#122181 = DIRECTION('',(0.,0.,-1.)); +#122182 = DIRECTION('',(0.,-1.,0.)); +#122183 = ADVANCED_FACE('',(#122184),#122195,.T.); +#122184 = FACE_BOUND('',#122185,.T.); +#122185 = EDGE_LOOP('',(#122186,#122192,#122193,#122194)); +#122186 = ORIENTED_EDGE('',*,*,#122187,.F.); +#122187 = EDGE_CURVE('',#121074,#122120,#122188,.T.); +#122188 = LINE('',#122189,#122190); +#122189 = CARTESIAN_POINT('',(-4.75,7.875,-6.8096)); +#122190 = VECTOR('',#122191,1.); +#122191 = DIRECTION('',(1.,0.,0.)); +#122192 = ORIENTED_EDGE('',*,*,#121073,.F.); +#122193 = ORIENTED_EDGE('',*,*,#121927,.T.); +#122194 = ORIENTED_EDGE('',*,*,#122127,.T.); +#122195 = PLANE('',#122196); +#122196 = AXIS2_PLACEMENT_3D('',#122197,#122198,#122199); +#122197 = CARTESIAN_POINT('',(-4.75,6.575,-6.8096)); +#122198 = DIRECTION('',(0.,0.,1.)); +#122199 = DIRECTION('',(1.,0.,-0.)); +#122200 = ADVANCED_FACE('',(#122201),#122212,.T.); +#122201 = FACE_BOUND('',#122202,.T.); +#122202 = EDGE_LOOP('',(#122203,#122204,#122210,#122211)); +#122203 = ORIENTED_EDGE('',*,*,#122119,.T.); +#122204 = ORIENTED_EDGE('',*,*,#122205,.F.); +#122205 = EDGE_CURVE('',#121082,#122112,#122206,.T.); +#122206 = LINE('',#122207,#122208); +#122207 = CARTESIAN_POINT('',(-4.75,7.875,-6.5096)); +#122208 = VECTOR('',#122209,1.); +#122209 = DIRECTION('',(1.,0.,0.)); +#122210 = ORIENTED_EDGE('',*,*,#121081,.F.); +#122211 = ORIENTED_EDGE('',*,*,#122187,.T.); +#122212 = PLANE('',#122213); +#122213 = AXIS2_PLACEMENT_3D('',#122214,#122215,#122216); +#122214 = CARTESIAN_POINT('',(-4.75,7.875,-6.8096)); +#122215 = DIRECTION('',(0.,-1.,0.)); +#122216 = DIRECTION('',(0.,0.,-1.)); +#122217 = ADVANCED_FACE('',(#122218),#122224,.T.); +#122218 = FACE_BOUND('',#122219,.T.); +#122219 = EDGE_LOOP('',(#122220,#122221,#122222,#122223)); +#122220 = ORIENTED_EDGE('',*,*,#122057,.F.); +#122221 = ORIENTED_EDGE('',*,*,#121089,.T.); +#122222 = ORIENTED_EDGE('',*,*,#122205,.T.); +#122223 = ORIENTED_EDGE('',*,*,#122111,.T.); +#122224 = PLANE('',#122225); +#122225 = AXIS2_PLACEMENT_3D('',#122226,#122227,#122228); +#122226 = CARTESIAN_POINT('',(-4.75,7.875,-6.5096)); +#122227 = DIRECTION('',(0.,0.,-1.)); +#122228 = DIRECTION('',(0.,-1.,0.)); +#122229 = ADVANCED_FACE('',(#122230),#122249,.T.); +#122230 = FACE_BOUND('',#122231,.T.); +#122231 = EDGE_LOOP('',(#122232,#122233,#122234,#122242)); +#122232 = ORIENTED_EDGE('',*,*,#121137,.F.); +#122233 = ORIENTED_EDGE('',*,*,#122026,.F.); +#122234 = ORIENTED_EDGE('',*,*,#122235,.T.); +#122235 = EDGE_CURVE('',#122019,#122236,#122238,.T.); +#122236 = VERTEX_POINT('',#122237); +#122237 = CARTESIAN_POINT('',(-2.15,8.9,0.1)); +#122238 = LINE('',#122239,#122240); +#122239 = CARTESIAN_POINT('',(-2.15,6.575,0.1)); +#122240 = VECTOR('',#122241,1.); +#122241 = DIRECTION('',(0.,1.,0.)); +#122242 = ORIENTED_EDGE('',*,*,#122243,.F.); +#122243 = EDGE_CURVE('',#121138,#122236,#122244,.T.); +#122244 = CIRCLE('',#122245,2.6); +#122245 = AXIS2_PLACEMENT_3D('',#122246,#122247,#122248); +#122246 = CARTESIAN_POINT('',(-2.15,8.9,-2.5)); +#122247 = DIRECTION('',(0.,1.,0.)); +#122248 = DIRECTION('',(-1.,0.,0.)); +#122249 = CYLINDRICAL_SURFACE('',#122250,2.6); +#122250 = AXIS2_PLACEMENT_3D('',#122251,#122252,#122253); +#122251 = CARTESIAN_POINT('',(-2.15,3.21347,-2.5)); +#122252 = DIRECTION('',(0.,1.,0.)); +#122253 = DIRECTION('',(-1.,0.,0.)); +#122254 = ADVANCED_FACE('',(#122255,#122347,#122390,#122410),#122453,.T. + ); +#122255 = FACE_BOUND('',#122256,.T.); +#122256 = EDGE_LOOP('',(#122257,#122258,#122266,#122275,#122281,#122282, + #122290,#122298,#122307,#122313,#122314,#122322,#122331,#122339, + #122345,#122346)); +#122257 = ORIENTED_EDGE('',*,*,#122243,.T.); +#122258 = ORIENTED_EDGE('',*,*,#122259,.T.); +#122259 = EDGE_CURVE('',#122236,#122260,#122262,.T.); +#122260 = VERTEX_POINT('',#122261); +#122261 = CARTESIAN_POINT('',(2.15,8.9,0.1)); +#122262 = LINE('',#122263,#122264); +#122263 = CARTESIAN_POINT('',(-2.15,8.9,0.1)); +#122264 = VECTOR('',#122265,1.); +#122265 = DIRECTION('',(1.,0.,0.)); +#122266 = ORIENTED_EDGE('',*,*,#122267,.T.); +#122267 = EDGE_CURVE('',#122260,#122268,#122270,.T.); +#122268 = VERTEX_POINT('',#122269); +#122269 = CARTESIAN_POINT('',(4.75,8.9,-2.5)); +#122270 = CIRCLE('',#122271,2.6); +#122271 = AXIS2_PLACEMENT_3D('',#122272,#122273,#122274); +#122272 = CARTESIAN_POINT('',(2.15,8.9,-2.5)); +#122273 = DIRECTION('',(0.,1.,0.)); +#122274 = DIRECTION('',(0.,-0.,1.)); +#122275 = ORIENTED_EDGE('',*,*,#122276,.F.); +#122276 = EDGE_CURVE('',#121272,#122268,#122277,.T.); +#122277 = LINE('',#122278,#122279); +#122278 = CARTESIAN_POINT('',(4.75,8.9,-8.3)); +#122279 = VECTOR('',#122280,1.); +#122280 = DIRECTION('',(0.,0.,1.)); +#122281 = ORIENTED_EDGE('',*,*,#121271,.F.); +#122282 = ORIENTED_EDGE('',*,*,#122283,.T.); +#122283 = EDGE_CURVE('',#121264,#122284,#122286,.T.); +#122284 = VERTEX_POINT('',#122285); +#122285 = CARTESIAN_POINT('',(3.55,8.9,-5.75)); +#122286 = LINE('',#122287,#122288); +#122287 = CARTESIAN_POINT('',(3.55,8.9,-8.3)); +#122288 = VECTOR('',#122289,1.); +#122289 = DIRECTION('',(0.,0.,1.)); +#122290 = ORIENTED_EDGE('',*,*,#122291,.F.); +#122291 = EDGE_CURVE('',#122292,#122284,#122294,.T.); +#122292 = VERTEX_POINT('',#122293); +#122293 = CARTESIAN_POINT('',(3.092329219213,8.9,-5.75)); +#122294 = LINE('',#122295,#122296); +#122295 = CARTESIAN_POINT('',(3.092329219213,8.9,-5.75)); +#122296 = VECTOR('',#122297,1.); +#122297 = DIRECTION('',(1.,0.,0.)); +#122298 = ORIENTED_EDGE('',*,*,#122299,.T.); +#122299 = EDGE_CURVE('',#122292,#122300,#122302,.T.); +#122300 = VERTEX_POINT('',#122301); +#122301 = CARTESIAN_POINT('',(1.,8.9,-7.842329219213)); +#122302 = CIRCLE('',#122303,3.25); +#122303 = AXIS2_PLACEMENT_3D('',#122304,#122305,#122306); +#122304 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122305 = DIRECTION('',(0.,1.,0.)); +#122306 = DIRECTION('',(0.951485913604,0.,-0.307692307692)); +#122307 = ORIENTED_EDGE('',*,*,#122308,.F.); +#122308 = EDGE_CURVE('',#121240,#122300,#122309,.T.); +#122309 = LINE('',#122310,#122311); +#122310 = CARTESIAN_POINT('',(1.,8.9,-8.3)); +#122311 = VECTOR('',#122312,1.); +#122312 = DIRECTION('',(0.,0.,1.)); +#122313 = ORIENTED_EDGE('',*,*,#121239,.F.); +#122314 = ORIENTED_EDGE('',*,*,#122315,.T.); +#122315 = EDGE_CURVE('',#121232,#122316,#122318,.T.); +#122316 = VERTEX_POINT('',#122317); +#122317 = CARTESIAN_POINT('',(-1.,8.9,-7.842329219213)); +#122318 = LINE('',#122319,#122320); +#122319 = CARTESIAN_POINT('',(-1.,8.9,-8.3)); +#122320 = VECTOR('',#122321,1.); +#122321 = DIRECTION('',(0.,0.,1.)); +#122322 = ORIENTED_EDGE('',*,*,#122323,.T.); +#122323 = EDGE_CURVE('',#122316,#122324,#122326,.T.); +#122324 = VERTEX_POINT('',#122325); +#122325 = CARTESIAN_POINT('',(-3.092329219213,8.9,-5.75)); +#122326 = CIRCLE('',#122327,3.25); +#122327 = AXIS2_PLACEMENT_3D('',#122328,#122329,#122330); +#122328 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122329 = DIRECTION('',(0.,1.,0.)); +#122330 = DIRECTION('',(-0.307692307692,0.,-0.951485913604)); +#122331 = ORIENTED_EDGE('',*,*,#122332,.F.); +#122332 = EDGE_CURVE('',#122333,#122324,#122335,.T.); +#122333 = VERTEX_POINT('',#122334); +#122334 = CARTESIAN_POINT('',(-3.55,8.9,-5.75)); +#122335 = LINE('',#122336,#122337); +#122336 = CARTESIAN_POINT('',(-3.55,8.9,-5.75)); +#122337 = VECTOR('',#122338,1.); +#122338 = DIRECTION('',(1.,0.,0.)); +#122339 = ORIENTED_EDGE('',*,*,#122340,.F.); +#122340 = EDGE_CURVE('',#121208,#122333,#122341,.T.); +#122341 = LINE('',#122342,#122343); +#122342 = CARTESIAN_POINT('',(-3.55,8.9,-8.3)); +#122343 = VECTOR('',#122344,1.); +#122344 = DIRECTION('',(0.,0.,1.)); +#122345 = ORIENTED_EDGE('',*,*,#121207,.F.); +#122346 = ORIENTED_EDGE('',*,*,#121145,.T.); +#122347 = FACE_BOUND('',#122348,.T.); +#122348 = EDGE_LOOP('',(#122349,#122359,#122367,#122375,#122384)); +#122349 = ORIENTED_EDGE('',*,*,#122350,.F.); +#122350 = EDGE_CURVE('',#122351,#122353,#122355,.T.); +#122351 = VERTEX_POINT('',#122352); +#122352 = CARTESIAN_POINT('',(3.55,8.9,-1.2)); +#122353 = VERTEX_POINT('',#122354); +#122354 = CARTESIAN_POINT('',(3.55,8.9,-3.75)); +#122355 = LINE('',#122356,#122357); +#122356 = CARTESIAN_POINT('',(3.55,8.9,-1.2)); +#122357 = VECTOR('',#122358,1.); +#122358 = DIRECTION('',(0.,0.,-1.)); +#122359 = ORIENTED_EDGE('',*,*,#122360,.F.); +#122360 = EDGE_CURVE('',#122361,#122351,#122363,.T.); +#122361 = VERTEX_POINT('',#122362); +#122362 = CARTESIAN_POINT('',(1.,8.9,-1.2)); +#122363 = LINE('',#122364,#122365); +#122364 = CARTESIAN_POINT('',(1.,8.9,-1.2)); +#122365 = VECTOR('',#122366,1.); +#122366 = DIRECTION('',(1.,0.,0.)); +#122367 = ORIENTED_EDGE('',*,*,#122368,.F.); +#122368 = EDGE_CURVE('',#122369,#122361,#122371,.T.); +#122369 = VERTEX_POINT('',#122370); +#122370 = CARTESIAN_POINT('',(1.,8.9,-1.657670780787)); +#122371 = LINE('',#122372,#122373); +#122372 = CARTESIAN_POINT('',(1.,8.9,-1.657670780787)); +#122373 = VECTOR('',#122374,1.); +#122374 = DIRECTION('',(0.,0.,1.)); +#122375 = ORIENTED_EDGE('',*,*,#122376,.T.); +#122376 = EDGE_CURVE('',#122369,#122377,#122379,.T.); +#122377 = VERTEX_POINT('',#122378); +#122378 = CARTESIAN_POINT('',(3.092329219213,8.9,-3.75)); +#122379 = CIRCLE('',#122380,3.25); +#122380 = AXIS2_PLACEMENT_3D('',#122381,#122382,#122383); +#122381 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122382 = DIRECTION('',(0.,1.,0.)); +#122383 = DIRECTION('',(0.307692307692,-0.,0.951485913604)); +#122384 = ORIENTED_EDGE('',*,*,#122385,.F.); +#122385 = EDGE_CURVE('',#122353,#122377,#122386,.T.); +#122386 = LINE('',#122387,#122388); +#122387 = CARTESIAN_POINT('',(3.55,8.9,-3.75)); +#122388 = VECTOR('',#122389,1.); +#122389 = DIRECTION('',(-1.,0.,0.)); +#122390 = FACE_BOUND('',#122391,.T.); +#122391 = EDGE_LOOP('',(#122392,#122403)); +#122392 = ORIENTED_EDGE('',*,*,#122393,.F.); +#122393 = EDGE_CURVE('',#122394,#122396,#122398,.T.); +#122394 = VERTEX_POINT('',#122395); +#122395 = CARTESIAN_POINT('',(0.,8.9,-2.25)); +#122396 = VERTEX_POINT('',#122397); +#122397 = CARTESIAN_POINT('',(0.,8.9,-7.25)); +#122398 = CIRCLE('',#122399,2.5); +#122399 = AXIS2_PLACEMENT_3D('',#122400,#122401,#122402); +#122400 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122401 = DIRECTION('',(0.,1.,0.)); +#122402 = DIRECTION('',(0.,-0.,1.)); +#122403 = ORIENTED_EDGE('',*,*,#122404,.F.); +#122404 = EDGE_CURVE('',#122396,#122394,#122405,.T.); +#122405 = CIRCLE('',#122406,2.5); +#122406 = AXIS2_PLACEMENT_3D('',#122407,#122408,#122409); +#122407 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122408 = DIRECTION('',(0.,1.,0.)); +#122409 = DIRECTION('',(0.,0.,-1.)); +#122410 = FACE_BOUND('',#122411,.T.); +#122411 = EDGE_LOOP('',(#122412,#122422,#122430,#122439,#122447)); +#122412 = ORIENTED_EDGE('',*,*,#122413,.F.); +#122413 = EDGE_CURVE('',#122414,#122416,#122418,.T.); +#122414 = VERTEX_POINT('',#122415); +#122415 = CARTESIAN_POINT('',(-3.55,8.9,-3.75)); +#122416 = VERTEX_POINT('',#122417); +#122417 = CARTESIAN_POINT('',(-3.55,8.9,-1.2)); +#122418 = LINE('',#122419,#122420); +#122419 = CARTESIAN_POINT('',(-3.55,8.9,-3.75)); +#122420 = VECTOR('',#122421,1.); +#122421 = DIRECTION('',(0.,0.,1.)); +#122422 = ORIENTED_EDGE('',*,*,#122423,.F.); +#122423 = EDGE_CURVE('',#122424,#122414,#122426,.T.); +#122424 = VERTEX_POINT('',#122425); +#122425 = CARTESIAN_POINT('',(-3.092329219213,8.9,-3.75)); +#122426 = LINE('',#122427,#122428); +#122427 = CARTESIAN_POINT('',(-3.092329219213,8.9,-3.75)); +#122428 = VECTOR('',#122429,1.); +#122429 = DIRECTION('',(-1.,0.,0.)); +#122430 = ORIENTED_EDGE('',*,*,#122431,.T.); +#122431 = EDGE_CURVE('',#122424,#122432,#122434,.T.); +#122432 = VERTEX_POINT('',#122433); +#122433 = CARTESIAN_POINT('',(-1.,8.9,-1.657670780787)); +#122434 = CIRCLE('',#122435,3.25); +#122435 = AXIS2_PLACEMENT_3D('',#122436,#122437,#122438); +#122436 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122437 = DIRECTION('',(0.,1.,0.)); +#122438 = DIRECTION('',(-0.951485913604,0.,0.307692307692)); +#122439 = ORIENTED_EDGE('',*,*,#122440,.F.); +#122440 = EDGE_CURVE('',#122441,#122432,#122443,.T.); +#122441 = VERTEX_POINT('',#122442); +#122442 = CARTESIAN_POINT('',(-1.,8.9,-1.2)); +#122443 = LINE('',#122444,#122445); +#122444 = CARTESIAN_POINT('',(-1.,8.9,-1.2)); +#122445 = VECTOR('',#122446,1.); +#122446 = DIRECTION('',(0.,0.,-1.)); +#122447 = ORIENTED_EDGE('',*,*,#122448,.F.); +#122448 = EDGE_CURVE('',#122416,#122441,#122449,.T.); +#122449 = LINE('',#122450,#122451); +#122450 = CARTESIAN_POINT('',(-3.55,8.9,-1.2)); +#122451 = VECTOR('',#122452,1.); +#122452 = DIRECTION('',(1.,0.,0.)); +#122453 = PLANE('',#122454); +#122454 = AXIS2_PLACEMENT_3D('',#122455,#122456,#122457); +#122455 = CARTESIAN_POINT('',(-4.75,8.9,-10.5)); +#122456 = DIRECTION('',(-0.,1.,0.)); +#122457 = DIRECTION('',(1.,0.,0.)); +#122458 = ADVANCED_FACE('',(#122459),#122484,.F.); +#122459 = FACE_BOUND('',#122460,.T.); +#122460 = EDGE_LOOP('',(#122461,#122469,#122477,#122483)); +#122461 = ORIENTED_EDGE('',*,*,#122462,.T.); +#122462 = EDGE_CURVE('',#122441,#122463,#122465,.T.); +#122463 = VERTEX_POINT('',#122464); +#122464 = CARTESIAN_POINT('',(-1.,8.5,-1.2)); +#122465 = LINE('',#122466,#122467); +#122466 = CARTESIAN_POINT('',(-1.,8.9,-1.2)); +#122467 = VECTOR('',#122468,1.); +#122468 = DIRECTION('',(0.,-1.,0.)); +#122469 = ORIENTED_EDGE('',*,*,#122470,.F.); +#122470 = EDGE_CURVE('',#122471,#122463,#122473,.T.); +#122471 = VERTEX_POINT('',#122472); +#122472 = CARTESIAN_POINT('',(-3.55,8.5,-1.2)); +#122473 = LINE('',#122474,#122475); +#122474 = CARTESIAN_POINT('',(-3.55,8.5,-1.2)); +#122475 = VECTOR('',#122476,1.); +#122476 = DIRECTION('',(1.,0.,0.)); +#122477 = ORIENTED_EDGE('',*,*,#122478,.F.); +#122478 = EDGE_CURVE('',#122416,#122471,#122479,.T.); +#122479 = LINE('',#122480,#122481); +#122480 = CARTESIAN_POINT('',(-3.55,8.9,-1.2)); +#122481 = VECTOR('',#122482,1.); +#122482 = DIRECTION('',(0.,-1.,0.)); +#122483 = ORIENTED_EDGE('',*,*,#122448,.T.); +#122484 = PLANE('',#122485); +#122485 = AXIS2_PLACEMENT_3D('',#122486,#122487,#122488); +#122486 = CARTESIAN_POINT('',(-3.55,8.9,-1.2)); +#122487 = DIRECTION('',(0.,0.,1.)); +#122488 = DIRECTION('',(1.,0.,-0.)); +#122489 = ADVANCED_FACE('',(#122490),#122508,.F.); +#122490 = FACE_BOUND('',#122491,.T.); +#122491 = EDGE_LOOP('',(#122492,#122493,#122501,#122507)); +#122492 = ORIENTED_EDGE('',*,*,#122478,.T.); +#122493 = ORIENTED_EDGE('',*,*,#122494,.F.); +#122494 = EDGE_CURVE('',#122495,#122471,#122497,.T.); +#122495 = VERTEX_POINT('',#122496); +#122496 = CARTESIAN_POINT('',(-3.55,8.5,-3.75)); +#122497 = LINE('',#122498,#122499); +#122498 = CARTESIAN_POINT('',(-3.55,8.5,-3.75)); +#122499 = VECTOR('',#122500,1.); +#122500 = DIRECTION('',(0.,0.,1.)); +#122501 = ORIENTED_EDGE('',*,*,#122502,.F.); +#122502 = EDGE_CURVE('',#122414,#122495,#122503,.T.); +#122503 = LINE('',#122504,#122505); +#122504 = CARTESIAN_POINT('',(-3.55,8.9,-3.75)); +#122505 = VECTOR('',#122506,1.); +#122506 = DIRECTION('',(0.,-1.,0.)); +#122507 = ORIENTED_EDGE('',*,*,#122413,.T.); +#122508 = PLANE('',#122509); +#122509 = AXIS2_PLACEMENT_3D('',#122510,#122511,#122512); +#122510 = CARTESIAN_POINT('',(-3.55,8.9,-3.75)); +#122511 = DIRECTION('',(-1.,0.,0.)); +#122512 = DIRECTION('',(0.,0.,1.)); +#122513 = ADVANCED_FACE('',(#122514),#122532,.F.); +#122514 = FACE_BOUND('',#122515,.T.); +#122515 = EDGE_LOOP('',(#122516,#122517,#122525,#122531)); +#122516 = ORIENTED_EDGE('',*,*,#122502,.T.); +#122517 = ORIENTED_EDGE('',*,*,#122518,.F.); +#122518 = EDGE_CURVE('',#122519,#122495,#122521,.T.); +#122519 = VERTEX_POINT('',#122520); +#122520 = CARTESIAN_POINT('',(-3.092329219213,8.5,-3.75)); +#122521 = LINE('',#122522,#122523); +#122522 = CARTESIAN_POINT('',(-3.092329219213,8.5,-3.75)); +#122523 = VECTOR('',#122524,1.); +#122524 = DIRECTION('',(-1.,0.,0.)); +#122525 = ORIENTED_EDGE('',*,*,#122526,.F.); +#122526 = EDGE_CURVE('',#122424,#122519,#122527,.T.); +#122527 = LINE('',#122528,#122529); +#122528 = CARTESIAN_POINT('',(-3.092329219213,8.9,-3.75)); +#122529 = VECTOR('',#122530,1.); +#122530 = DIRECTION('',(0.,-1.,0.)); +#122531 = ORIENTED_EDGE('',*,*,#122423,.T.); +#122532 = PLANE('',#122533); +#122533 = AXIS2_PLACEMENT_3D('',#122534,#122535,#122536); +#122534 = CARTESIAN_POINT('',(-3.092329219213,8.9,-3.75)); +#122535 = DIRECTION('',(0.,0.,-1.)); +#122536 = DIRECTION('',(0.,-1.,0.)); +#122537 = ADVANCED_FACE('',(#122538),#122557,.T.); +#122538 = FACE_BOUND('',#122539,.T.); +#122539 = EDGE_LOOP('',(#122540,#122541,#122550,#122556)); +#122540 = ORIENTED_EDGE('',*,*,#122526,.T.); +#122541 = ORIENTED_EDGE('',*,*,#122542,.F.); +#122542 = EDGE_CURVE('',#122543,#122519,#122545,.T.); +#122543 = VERTEX_POINT('',#122544); +#122544 = CARTESIAN_POINT('',(-1.,8.5,-1.657670780787)); +#122545 = CIRCLE('',#122546,3.25); +#122546 = AXIS2_PLACEMENT_3D('',#122547,#122548,#122549); +#122547 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#122548 = DIRECTION('',(0.,-1.,0.)); +#122549 = DIRECTION('',(-0.307692307692,0.,0.951485913604)); +#122550 = ORIENTED_EDGE('',*,*,#122551,.F.); +#122551 = EDGE_CURVE('',#122432,#122543,#122552,.T.); +#122552 = LINE('',#122553,#122554); +#122553 = CARTESIAN_POINT('',(-1.,8.9,-1.657670780787)); +#122554 = VECTOR('',#122555,1.); +#122555 = DIRECTION('',(0.,-1.,0.)); +#122556 = ORIENTED_EDGE('',*,*,#122431,.F.); +#122557 = CYLINDRICAL_SURFACE('',#122558,3.25); +#122558 = AXIS2_PLACEMENT_3D('',#122559,#122560,#122561); +#122559 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#122560 = DIRECTION('',(0.,1.,0.)); +#122561 = DIRECTION('',(0.,0.,-1.)); +#122562 = ADVANCED_FACE('',(#122563),#122574,.F.); +#122563 = FACE_BOUND('',#122564,.T.); +#122564 = EDGE_LOOP('',(#122565,#122566,#122572,#122573)); +#122565 = ORIENTED_EDGE('',*,*,#122551,.T.); +#122566 = ORIENTED_EDGE('',*,*,#122567,.F.); +#122567 = EDGE_CURVE('',#122463,#122543,#122568,.T.); +#122568 = LINE('',#122569,#122570); +#122569 = CARTESIAN_POINT('',(-1.,8.5,-1.2)); +#122570 = VECTOR('',#122571,1.); +#122571 = DIRECTION('',(0.,0.,-1.)); +#122572 = ORIENTED_EDGE('',*,*,#122462,.F.); +#122573 = ORIENTED_EDGE('',*,*,#122440,.T.); +#122574 = PLANE('',#122575); +#122575 = AXIS2_PLACEMENT_3D('',#122576,#122577,#122578); +#122576 = CARTESIAN_POINT('',(-1.,8.9,-1.2)); +#122577 = DIRECTION('',(1.,0.,0.)); +#122578 = DIRECTION('',(-0.,1.,0.)); +#122579 = ADVANCED_FACE('',(#122580,#122587),#122741,.T.); +#122580 = FACE_BOUND('',#122581,.T.); +#122581 = EDGE_LOOP('',(#122582,#122583,#122584,#122585,#122586)); +#122582 = ORIENTED_EDGE('',*,*,#122567,.T.); +#122583 = ORIENTED_EDGE('',*,*,#122542,.T.); +#122584 = ORIENTED_EDGE('',*,*,#122518,.T.); +#122585 = ORIENTED_EDGE('',*,*,#122494,.T.); +#122586 = ORIENTED_EDGE('',*,*,#122470,.T.); +#122587 = FACE_BOUND('',#122588,.T.); +#122588 = EDGE_LOOP('',(#122589,#122599,#122607,#122615,#122623,#122631, + #122639,#122647,#122655,#122663,#122671,#122679,#122687,#122695, + #122703,#122711,#122719,#122727,#122735)); +#122589 = ORIENTED_EDGE('',*,*,#122590,.F.); +#122590 = EDGE_CURVE('',#122591,#122593,#122595,.T.); +#122591 = VERTEX_POINT('',#122592); +#122592 = CARTESIAN_POINT('',(-2.7948,8.5,-1.711482977962)); +#122593 = VERTEX_POINT('',#122594); +#122594 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.698717022038)); +#122595 = LINE('',#122596,#122597); +#122596 = CARTESIAN_POINT('',(-2.7948,8.5,-1.711482977962)); +#122597 = VECTOR('',#122598,1.); +#122598 = DIRECTION('',(0.890605374698,0.,0.454776941543)); +#122599 = ORIENTED_EDGE('',*,*,#122600,.F.); +#122600 = EDGE_CURVE('',#122601,#122591,#122603,.T.); +#122601 = VERTEX_POINT('',#122602); +#122602 = CARTESIAN_POINT('',(-2.8323,8.5,-1.762546801662)); +#122603 = LINE('',#122604,#122605); +#122604 = CARTESIAN_POINT('',(-2.8323,8.5,-1.762546801662)); +#122605 = VECTOR('',#122606,1.); +#122606 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#122607 = ORIENTED_EDGE('',*,*,#122608,.F.); +#122608 = EDGE_CURVE('',#122609,#122601,#122611,.T.); +#122609 = VERTEX_POINT('',#122610); +#122610 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.800844687319)); +#122611 = LINE('',#122612,#122613); +#122612 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.800844687319)); +#122613 = VECTOR('',#122614,1.); +#122614 = DIRECTION('',(0.310279666627,0.,0.950645322125)); +#122615 = ORIENTED_EDGE('',*,*,#122616,.F.); +#122616 = EDGE_CURVE('',#122617,#122609,#122619,.T.); +#122617 = VERTEX_POINT('',#122618); +#122618 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.864674466944)); +#122619 = LINE('',#122620,#122621); +#122620 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.864674466944)); +#122621 = VECTOR('',#122622,1.); +#122622 = DIRECTION('',(0.,0.,1.)); +#122623 = ORIENTED_EDGE('',*,*,#122624,.F.); +#122624 = EDGE_CURVE('',#122625,#122617,#122627,.T.); +#122625 = VERTEX_POINT('',#122626); +#122626 = CARTESIAN_POINT('',(-2.8323,8.5,-1.902972343659)); +#122627 = LINE('',#122628,#122629); +#122628 = CARTESIAN_POINT('',(-2.8323,8.5,-1.902972343659)); +#122629 = VECTOR('',#122630,1.); +#122630 = DIRECTION('',(-0.310279732089,0.,0.950645300759)); +#122631 = ORIENTED_EDGE('',*,*,#122632,.F.); +#122632 = EDGE_CURVE('',#122633,#122625,#122635,.T.); +#122633 = VERTEX_POINT('',#122634); +#122634 = CARTESIAN_POINT('',(-2.7948,8.5,-1.95403617183)); +#122635 = LINE('',#122636,#122637); +#122636 = CARTESIAN_POINT('',(-2.7948,8.5,-1.95403617183)); +#122637 = VECTOR('',#122638,1.); +#122638 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#122639 = ORIENTED_EDGE('',*,*,#122640,.F.); +#122640 = EDGE_CURVE('',#122641,#122633,#122643,.T.); +#122641 = VERTEX_POINT('',#122642); +#122642 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.992334042957)); +#122643 = LINE('',#122644,#122645); +#122644 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.992334042957)); +#122645 = VECTOR('',#122646,1.); +#122646 = DIRECTION('',(-0.793878085311,0.,0.608076957024)); +#122647 = ORIENTED_EDGE('',*,*,#122648,.F.); +#122648 = EDGE_CURVE('',#122649,#122641,#122651,.T.); +#122649 = VERTEX_POINT('',#122650); +#122650 = CARTESIAN_POINT('',(-2.6823,8.5,-2.0051)); +#122651 = LINE('',#122652,#122653); +#122652 = CARTESIAN_POINT('',(-2.6823,8.5,-2.0051)); +#122653 = VECTOR('',#122654,1.); +#122654 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#122655 = ORIENTED_EDGE('',*,*,#122656,.F.); +#122656 = EDGE_CURVE('',#122657,#122649,#122659,.T.); +#122657 = VERTEX_POINT('',#122658); +#122658 = CARTESIAN_POINT('',(-2.3823,8.5,-2.0051)); +#122659 = LINE('',#122660,#122661); +#122660 = CARTESIAN_POINT('',(-2.3823,8.5,-2.0051)); +#122661 = VECTOR('',#122662,1.); +#122662 = DIRECTION('',(-1.,0.,0.)); +#122663 = ORIENTED_EDGE('',*,*,#122664,.F.); +#122664 = EDGE_CURVE('',#122665,#122657,#122667,.T.); +#122665 = VERTEX_POINT('',#122666); +#122666 = CARTESIAN_POINT('',(-2.3823,8.5,-1.4051)); +#122667 = LINE('',#122668,#122669); +#122668 = CARTESIAN_POINT('',(-2.3823,8.5,-1.4051)); +#122669 = VECTOR('',#122670,1.); +#122670 = DIRECTION('',(0.,0.,-1.)); +#122671 = ORIENTED_EDGE('',*,*,#122672,.F.); +#122672 = EDGE_CURVE('',#122673,#122665,#122675,.T.); +#122673 = VERTEX_POINT('',#122674); +#122674 = CARTESIAN_POINT('',(-2.6823,8.5,-1.4051)); +#122675 = LINE('',#122676,#122677); +#122676 = CARTESIAN_POINT('',(-2.6823,8.5,-1.4051)); +#122677 = VECTOR('',#122678,1.); +#122678 = DIRECTION('',(1.,0.,0.)); +#122679 = ORIENTED_EDGE('',*,*,#122680,.F.); +#122680 = EDGE_CURVE('',#122681,#122673,#122683,.T.); +#122681 = VERTEX_POINT('',#122682); +#122682 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.417865955925)); +#122683 = LINE('',#122684,#122685); +#122684 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.417865955925)); +#122685 = VECTOR('',#122686,1.); +#122686 = DIRECTION('',(0.979770716763,0.,0.200123318418)); +#122687 = ORIENTED_EDGE('',*,*,#122688,.F.); +#122688 = EDGE_CURVE('',#122689,#122681,#122691,.T.); +#122689 = VERTEX_POINT('',#122690); +#122690 = CARTESIAN_POINT('',(-2.7948,8.5,-1.4561638237)); +#122691 = LINE('',#122692,#122693); +#122692 = CARTESIAN_POINT('',(-2.7948,8.5,-1.4561638237)); +#122693 = VECTOR('',#122694,1.); +#122694 = DIRECTION('',(0.793878111009,0.,0.608076923474)); +#122695 = ORIENTED_EDGE('',*,*,#122696,.F.); +#122696 = EDGE_CURVE('',#122697,#122689,#122699,.T.); +#122697 = VERTEX_POINT('',#122698); +#122698 = CARTESIAN_POINT('',(-2.8323,8.5,-1.5072276474)); +#122699 = LINE('',#122700,#122701); +#122700 = CARTESIAN_POINT('',(-2.8323,8.5,-1.5072276474)); +#122701 = VECTOR('',#122702,1.); +#122702 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#122703 = ORIENTED_EDGE('',*,*,#122704,.F.); +#122704 = EDGE_CURVE('',#122705,#122697,#122707,.T.); +#122705 = VERTEX_POINT('',#122706); +#122706 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.545525515175)); +#122707 = LINE('',#122708,#122709); +#122708 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.545525515175)); +#122709 = VECTOR('',#122710,1.); +#122710 = DIRECTION('',(0.310279797551,0.,0.950645279393)); +#122711 = ORIENTED_EDGE('',*,*,#122712,.F.); +#122712 = EDGE_CURVE('',#122713,#122705,#122715,.T.); +#122713 = VERTEX_POINT('',#122714); +#122714 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.596589374638)); +#122715 = LINE('',#122716,#122717); +#122716 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.596589374638)); +#122717 = VECTOR('',#122718,1.); +#122718 = DIRECTION('',(0.,0.,1.)); +#122719 = ORIENTED_EDGE('',*,*,#122720,.F.); +#122720 = EDGE_CURVE('',#122721,#122713,#122723,.T.); +#122721 = VERTEX_POINT('',#122722); +#122722 = CARTESIAN_POINT('',(-2.8323,8.5,-1.634887242413)); +#122723 = LINE('',#122724,#122725); +#122724 = CARTESIAN_POINT('',(-2.8323,8.5,-1.634887242413)); +#122725 = VECTOR('',#122726,1.); +#122726 = DIRECTION('',(-0.310279797551,0.,0.950645279393)); +#122727 = ORIENTED_EDGE('',*,*,#122728,.F.); +#122728 = EDGE_CURVE('',#122729,#122721,#122731,.T.); +#122729 = VERTEX_POINT('',#122730); +#122730 = CARTESIAN_POINT('',(-2.7948,8.5,-1.685951066113)); +#122731 = LINE('',#122732,#122733); +#122732 = CARTESIAN_POINT('',(-2.7948,8.5,-1.685951066113)); +#122733 = VECTOR('',#122734,1.); +#122734 = DIRECTION('',(-0.59190954875,0.,0.806004395831)); +#122735 = ORIENTED_EDGE('',*,*,#122736,.F.); +#122736 = EDGE_CURVE('',#122593,#122729,#122737,.T.); +#122737 = LINE('',#122738,#122739); +#122738 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.698717022038)); +#122739 = VECTOR('',#122740,1.); +#122740 = DIRECTION('',(-0.890605374698,0.,0.454776941543)); +#122741 = PLANE('',#122742); +#122742 = AXIS2_PLACEMENT_3D('',#122743,#122744,#122745); +#122743 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#122744 = DIRECTION('',(-0.,1.,0.)); +#122745 = DIRECTION('',(1.,0.,0.)); +#122746 = ADVANCED_FACE('',(#122747),#122781,.T.); +#122747 = FACE_BOUND('',#122748,.T.); +#122748 = EDGE_LOOP('',(#122749,#122760,#122766,#122767,#122775)); +#122749 = ORIENTED_EDGE('',*,*,#122750,.T.); +#122750 = EDGE_CURVE('',#122751,#122753,#122755,.T.); +#122751 = VERTEX_POINT('',#122752); +#122752 = CARTESIAN_POINT('',(-3.092329219213,8.5,-5.75)); +#122753 = VERTEX_POINT('',#122754); +#122754 = CARTESIAN_POINT('',(-1.,8.5,-7.842329219213)); +#122755 = CIRCLE('',#122756,3.25); +#122756 = AXIS2_PLACEMENT_3D('',#122757,#122758,#122759); +#122757 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#122758 = DIRECTION('',(0.,-1.,0.)); +#122759 = DIRECTION('',(-0.951485913604,-0.,-0.307692307692)); +#122760 = ORIENTED_EDGE('',*,*,#122761,.T.); +#122761 = EDGE_CURVE('',#122753,#121224,#122762,.T.); +#122762 = LINE('',#122763,#122764); +#122763 = CARTESIAN_POINT('',(-1.,8.5,-7.842329219213)); +#122764 = VECTOR('',#122765,1.); +#122765 = DIRECTION('',(0.,0.,-1.)); +#122766 = ORIENTED_EDGE('',*,*,#121223,.T.); +#122767 = ORIENTED_EDGE('',*,*,#122768,.T.); +#122768 = EDGE_CURVE('',#121216,#122769,#122771,.T.); +#122769 = VERTEX_POINT('',#122770); +#122770 = CARTESIAN_POINT('',(-3.55,8.5,-5.75)); +#122771 = LINE('',#122772,#122773); +#122772 = CARTESIAN_POINT('',(-3.55,8.5,-8.3)); +#122773 = VECTOR('',#122774,1.); +#122774 = DIRECTION('',(0.,0.,1.)); +#122775 = ORIENTED_EDGE('',*,*,#122776,.T.); +#122776 = EDGE_CURVE('',#122769,#122751,#122777,.T.); +#122777 = LINE('',#122778,#122779); +#122778 = CARTESIAN_POINT('',(-3.55,8.5,-5.75)); +#122779 = VECTOR('',#122780,1.); +#122780 = DIRECTION('',(1.,0.,0.)); +#122781 = PLANE('',#122782); +#122782 = AXIS2_PLACEMENT_3D('',#122783,#122784,#122785); +#122783 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#122784 = DIRECTION('',(-0.,1.,0.)); +#122785 = DIRECTION('',(1.,0.,0.)); +#122786 = ADVANCED_FACE('',(#122787),#122821,.T.); +#122787 = FACE_BOUND('',#122788,.T.); +#122788 = EDGE_LOOP('',(#122789,#122800,#122808,#122814,#122815)); +#122789 = ORIENTED_EDGE('',*,*,#122790,.T.); +#122790 = EDGE_CURVE('',#122791,#122793,#122795,.T.); +#122791 = VERTEX_POINT('',#122792); +#122792 = CARTESIAN_POINT('',(1.,8.5,-7.842329219213)); +#122793 = VERTEX_POINT('',#122794); +#122794 = CARTESIAN_POINT('',(3.092329219213,8.5,-5.75)); +#122795 = CIRCLE('',#122796,3.25); +#122796 = AXIS2_PLACEMENT_3D('',#122797,#122798,#122799); +#122797 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#122798 = DIRECTION('',(0.,-1.,0.)); +#122799 = DIRECTION('',(0.307692307692,0.,-0.951485913604)); +#122800 = ORIENTED_EDGE('',*,*,#122801,.T.); +#122801 = EDGE_CURVE('',#122793,#122802,#122804,.T.); +#122802 = VERTEX_POINT('',#122803); +#122803 = CARTESIAN_POINT('',(3.55,8.5,-5.75)); +#122804 = LINE('',#122805,#122806); +#122805 = CARTESIAN_POINT('',(3.092329219213,8.5,-5.75)); +#122806 = VECTOR('',#122807,1.); +#122807 = DIRECTION('',(1.,0.,0.)); +#122808 = ORIENTED_EDGE('',*,*,#122809,.T.); +#122809 = EDGE_CURVE('',#122802,#121256,#122810,.T.); +#122810 = LINE('',#122811,#122812); +#122811 = CARTESIAN_POINT('',(3.55,8.5,-5.75)); +#122812 = VECTOR('',#122813,1.); +#122813 = DIRECTION('',(0.,0.,-1.)); +#122814 = ORIENTED_EDGE('',*,*,#121255,.T.); +#122815 = ORIENTED_EDGE('',*,*,#122816,.T.); +#122816 = EDGE_CURVE('',#121248,#122791,#122817,.T.); +#122817 = LINE('',#122818,#122819); +#122818 = CARTESIAN_POINT('',(1.,8.5,-8.3)); +#122819 = VECTOR('',#122820,1.); +#122820 = DIRECTION('',(0.,0.,1.)); +#122821 = PLANE('',#122822); +#122822 = AXIS2_PLACEMENT_3D('',#122823,#122824,#122825); +#122823 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#122824 = DIRECTION('',(-0.,1.,0.)); +#122825 = DIRECTION('',(1.,0.,0.)); +#122826 = ADVANCED_FACE('',(#122827,#122870,#123192),#123402,.T.); +#122827 = FACE_BOUND('',#122828,.T.); +#122828 = EDGE_LOOP('',(#122829,#122840,#122848,#122856,#122864)); +#122829 = ORIENTED_EDGE('',*,*,#122830,.T.); +#122830 = EDGE_CURVE('',#122831,#122833,#122835,.T.); +#122831 = VERTEX_POINT('',#122832); +#122832 = CARTESIAN_POINT('',(3.092329219213,8.5,-3.75)); +#122833 = VERTEX_POINT('',#122834); +#122834 = CARTESIAN_POINT('',(1.,8.5,-1.657670780787)); +#122835 = CIRCLE('',#122836,3.25); +#122836 = AXIS2_PLACEMENT_3D('',#122837,#122838,#122839); +#122837 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#122838 = DIRECTION('',(0.,-1.,0.)); +#122839 = DIRECTION('',(0.951485913604,0.,0.307692307692)); +#122840 = ORIENTED_EDGE('',*,*,#122841,.T.); +#122841 = EDGE_CURVE('',#122833,#122842,#122844,.T.); +#122842 = VERTEX_POINT('',#122843); +#122843 = CARTESIAN_POINT('',(1.,8.5,-1.2)); +#122844 = LINE('',#122845,#122846); +#122845 = CARTESIAN_POINT('',(1.,8.5,-1.657670780787)); +#122846 = VECTOR('',#122847,1.); +#122847 = DIRECTION('',(0.,0.,1.)); +#122848 = ORIENTED_EDGE('',*,*,#122849,.T.); +#122849 = EDGE_CURVE('',#122842,#122850,#122852,.T.); +#122850 = VERTEX_POINT('',#122851); +#122851 = CARTESIAN_POINT('',(3.55,8.5,-1.2)); +#122852 = LINE('',#122853,#122854); +#122853 = CARTESIAN_POINT('',(1.,8.5,-1.2)); +#122854 = VECTOR('',#122855,1.); +#122855 = DIRECTION('',(1.,0.,0.)); +#122856 = ORIENTED_EDGE('',*,*,#122857,.T.); +#122857 = EDGE_CURVE('',#122850,#122858,#122860,.T.); +#122858 = VERTEX_POINT('',#122859); +#122859 = CARTESIAN_POINT('',(3.55,8.5,-3.75)); +#122860 = LINE('',#122861,#122862); +#122861 = CARTESIAN_POINT('',(3.55,8.5,-1.2)); +#122862 = VECTOR('',#122863,1.); +#122863 = DIRECTION('',(0.,0.,-1.)); +#122864 = ORIENTED_EDGE('',*,*,#122865,.T.); +#122865 = EDGE_CURVE('',#122858,#122831,#122866,.T.); +#122866 = LINE('',#122867,#122868); +#122867 = CARTESIAN_POINT('',(3.55,8.5,-3.75)); +#122868 = VECTOR('',#122869,1.); +#122869 = DIRECTION('',(-1.,0.,0.)); +#122870 = FACE_BOUND('',#122871,.T.); +#122871 = EDGE_LOOP('',(#122872,#122882,#122890,#122898,#122906,#122914, + #122922,#122930,#122938,#122946,#122954,#122962,#122970,#122978, + #122986,#122994,#123002,#123010,#123018,#123026,#123034,#123042, + #123050,#123058,#123066,#123074,#123082,#123090,#123098,#123106, + #123114,#123122,#123130,#123138,#123146,#123154,#123162,#123170, + #123178,#123186)); +#122872 = ORIENTED_EDGE('',*,*,#122873,.F.); +#122873 = EDGE_CURVE('',#122874,#122876,#122878,.T.); +#122874 = VERTEX_POINT('',#122875); +#122875 = CARTESIAN_POINT('',(2.7319,8.5,-1.812334033346)); +#122876 = VERTEX_POINT('',#122877); +#122877 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.742121275759)); +#122878 = LINE('',#122879,#122880); +#122879 = CARTESIAN_POINT('',(2.7319,8.5,-1.812334033346)); +#122880 = VECTOR('',#122881,1.); +#122881 = DIRECTION('',(0.364692086679,0.,0.931128176952)); +#122882 = ORIENTED_EDGE('',*,*,#122883,.F.); +#122883 = EDGE_CURVE('',#122884,#122874,#122886,.T.); +#122884 = VERTEX_POINT('',#122885); +#122885 = CARTESIAN_POINT('',(2.7319,8.5,-1.882546810603)); +#122886 = LINE('',#122887,#122888); +#122887 = CARTESIAN_POINT('',(2.7319,8.5,-1.882546810603)); +#122888 = VECTOR('',#122889,1.); +#122889 = DIRECTION('',(0.,0.,1.)); +#122890 = ORIENTED_EDGE('',*,*,#122891,.F.); +#122891 = EDGE_CURVE('',#122892,#122884,#122894,.T.); +#122892 = VERTEX_POINT('',#122893); +#122893 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.952759578025)); +#122894 = LINE('',#122895,#122896); +#122895 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.952759578025)); +#122896 = VECTOR('',#122897,1.); +#122897 = DIRECTION('',(-0.364692042391,0.,0.931128194298)); +#122898 = ORIENTED_EDGE('',*,*,#122899,.F.); +#122899 = EDGE_CURVE('',#122900,#122892,#122902,.T.); +#122900 = VERTEX_POINT('',#122901); +#122901 = CARTESIAN_POINT('',(2.800650013113,8.5,-2.008929789013)); +#122902 = LINE('',#122903,#122904); +#122903 = CARTESIAN_POINT('',(2.800650013113,8.5,-2.008929789013)); +#122904 = VECTOR('',#122905,1.); +#122905 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#122906 = ORIENTED_EDGE('',*,*,#122907,.F.); +#122907 = EDGE_CURVE('',#122908,#122900,#122910,.T.); +#122908 = VERTEX_POINT('',#122909); +#122909 = CARTESIAN_POINT('',(2.869399986887,8.5,-2.051057447253)); +#122910 = LINE('',#122911,#122912); +#122911 = CARTESIAN_POINT('',(2.869399986887,8.5,-2.051057447253)); +#122912 = VECTOR('',#122913,1.); +#122913 = DIRECTION('',(-0.852653313443,0.,0.522477106747)); +#122914 = ORIENTED_EDGE('',*,*,#122915,.F.); +#122915 = EDGE_CURVE('',#122916,#122908,#122918,.T.); +#122916 = VERTEX_POINT('',#122917); +#122917 = CARTESIAN_POINT('',(2.93815,8.5,-2.0651)); +#122918 = LINE('',#122919,#122920); +#122919 = CARTESIAN_POINT('',(2.93815,8.5,-2.0651)); +#122920 = VECTOR('',#122921,1.); +#122921 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#122922 = ORIENTED_EDGE('',*,*,#122923,.F.); +#122923 = EDGE_CURVE('',#122924,#122916,#122926,.T.); +#122924 = VERTEX_POINT('',#122925); +#122925 = CARTESIAN_POINT('',(3.006899993443,8.5,-2.0651)); +#122926 = LINE('',#122927,#122928); +#122927 = CARTESIAN_POINT('',(3.006899993443,8.5,-2.0651)); +#122928 = VECTOR('',#122929,1.); +#122929 = DIRECTION('',(-1.,0.,0.)); +#122930 = ORIENTED_EDGE('',*,*,#122931,.F.); +#122931 = EDGE_CURVE('',#122932,#122924,#122934,.T.); +#122932 = VERTEX_POINT('',#122933); +#122933 = CARTESIAN_POINT('',(3.075649996722,8.5,-2.051057447253)); +#122934 = LINE('',#122935,#122936); +#122935 = CARTESIAN_POINT('',(3.075649996722,8.5,-2.051057447253)); +#122936 = VECTOR('',#122937,1.); +#122937 = DIRECTION('',(-0.979770707714,0.,-0.200123362717)); +#122938 = ORIENTED_EDGE('',*,*,#122939,.F.); +#122939 = EDGE_CURVE('',#122940,#122932,#122942,.T.); +#122940 = VERTEX_POINT('',#122941); +#122941 = CARTESIAN_POINT('',(3.1444,8.5,-2.008929789013)); +#122942 = LINE('',#122943,#122944); +#122943 = CARTESIAN_POINT('',(3.1444,8.5,-2.008929789013)); +#122944 = VECTOR('',#122945,1.); +#122945 = DIRECTION('',(-0.852653413332,0.,-0.522476943733)); +#122946 = ORIENTED_EDGE('',*,*,#122947,.F.); +#122947 = EDGE_CURVE('',#122948,#122940,#122950,.T.); +#122948 = VERTEX_POINT('',#122949); +#122949 = CARTESIAN_POINT('',(3.18565,8.5,-1.952759578025)); +#122950 = LINE('',#122951,#122952); +#122951 = CARTESIAN_POINT('',(3.18565,8.5,-1.952759578025)); +#122952 = VECTOR('',#122953,1.); +#122953 = DIRECTION('',(-0.591909515086,0.,-0.806004420553)); +#122954 = ORIENTED_EDGE('',*,*,#122955,.F.); +#122955 = EDGE_CURVE('',#122956,#122948,#122958,.T.); +#122956 = VERTEX_POINT('',#122957); +#122957 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.882546810603)); +#122958 = LINE('',#122959,#122960); +#122959 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.882546810603)); +#122960 = VECTOR('',#122961,1.); +#122961 = DIRECTION('',(-0.364691886909,0.,-0.931128255195)); +#122962 = ORIENTED_EDGE('',*,*,#122963,.F.); +#122963 = EDGE_CURVE('',#122964,#122956,#122966,.T.); +#122964 = VERTEX_POINT('',#122965); +#122965 = CARTESIAN_POINT('',(3.2269,8.5,-1.784248930311)); +#122966 = LINE('',#122967,#122968); +#122967 = CARTESIAN_POINT('',(3.2269,8.5,-1.784248930311)); +#122968 = VECTOR('',#122969,1.); +#122969 = DIRECTION('',(-0.138532203308,0.,-0.990357929562)); +#122970 = ORIENTED_EDGE('',*,*,#122971,.F.); +#122971 = EDGE_CURVE('',#122972,#122964,#122974,.T.); +#122972 = VERTEX_POINT('',#122973); +#122973 = CARTESIAN_POINT('',(3.2269,8.5,-1.685951069689)); +#122974 = LINE('',#122975,#122976); +#122975 = CARTESIAN_POINT('',(3.2269,8.5,-1.685951069689)); +#122976 = VECTOR('',#122977,1.); +#122977 = DIRECTION('',(0.,0.,-1.)); +#122978 = ORIENTED_EDGE('',*,*,#122979,.F.); +#122979 = EDGE_CURVE('',#122980,#122972,#122982,.T.); +#122980 = VERTEX_POINT('',#122981); +#122981 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.587653209066)); +#122982 = LINE('',#122983,#122984); +#122983 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.587653209066)); +#122984 = VECTOR('',#122985,1.); +#122985 = DIRECTION('',(0.138532230496,0.,-0.990357925759)); +#122986 = ORIENTED_EDGE('',*,*,#122987,.F.); +#122987 = EDGE_CURVE('',#122988,#122980,#122990,.T.); +#122988 = VERTEX_POINT('',#122989); +#122989 = CARTESIAN_POINT('',(3.18565,8.5,-1.51744041214)); +#122990 = LINE('',#122991,#122992); +#122991 = CARTESIAN_POINT('',(3.18565,8.5,-1.51744041214)); +#122992 = VECTOR('',#122993,1.); +#122993 = DIRECTION('',(0.364691754043,0.,-0.931128307234)); +#122994 = ORIENTED_EDGE('',*,*,#122995,.F.); +#122995 = EDGE_CURVE('',#122996,#122988,#122998,.T.); +#122996 = VERTEX_POINT('',#122997); +#122997 = CARTESIAN_POINT('',(3.1444,8.5,-1.46127020607)); +#122998 = LINE('',#122999,#123000); +#122999 = CARTESIAN_POINT('',(3.1444,8.5,-1.46127020607)); +#123000 = VECTOR('',#123001,1.); +#123001 = DIRECTION('',(0.59190954875,0.,-0.806004395831)); +#123002 = ORIENTED_EDGE('',*,*,#123003,.F.); +#123003 = EDGE_CURVE('',#123004,#122996,#123006,.T.); +#123004 = VERTEX_POINT('',#123005); +#123005 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.419142551517)); +#123006 = LINE('',#123007,#123008); +#123007 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.419142551517)); +#123008 = VECTOR('',#123009,1.); +#123009 = DIRECTION('',(0.852653433709,0.,-0.522476910479)); +#123010 = ORIENTED_EDGE('',*,*,#123011,.F.); +#123011 = EDGE_CURVE('',#123012,#123004,#123014,.T.); +#123012 = VERTEX_POINT('',#123013); +#123013 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.4051)); +#123014 = LINE('',#123015,#123016); +#123015 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.4051)); +#123016 = VECTOR('',#123017,1.); +#123017 = DIRECTION('',(0.979770711149,0.,-0.200123345899)); +#123018 = ORIENTED_EDGE('',*,*,#123019,.F.); +#123019 = EDGE_CURVE('',#123020,#123012,#123022,.T.); +#123020 = VERTEX_POINT('',#123021); +#123021 = CARTESIAN_POINT('',(2.951900006557,8.5,-1.4051)); +#123022 = LINE('',#123023,#123024); +#123023 = CARTESIAN_POINT('',(2.951900006557,8.5,-1.4051)); +#123024 = VECTOR('',#123025,1.); +#123025 = DIRECTION('',(1.,0.,0.)); +#123026 = ORIENTED_EDGE('',*,*,#123027,.F.); +#123027 = EDGE_CURVE('',#123028,#123020,#123030,.T.); +#123028 = VERTEX_POINT('',#123029); +#123029 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.419142551517)); +#123030 = LINE('',#123031,#123032); +#123031 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.419142551517)); +#123032 = VECTOR('',#123033,1.); +#123033 = DIRECTION('',(0.979770705536,0.,0.200123373381)); +#123034 = ORIENTED_EDGE('',*,*,#123035,.F.); +#123035 = EDGE_CURVE('',#123036,#123028,#123038,.T.); +#123036 = VERTEX_POINT('',#123037); +#123037 = CARTESIAN_POINT('',(2.8144,8.5,-1.46127020607)); +#123038 = LINE('',#123039,#123040); +#123039 = CARTESIAN_POINT('',(2.8144,8.5,-1.46127020607)); +#123040 = VECTOR('',#123041,1.); +#123041 = DIRECTION('',(0.852653467006,0.,0.522476856141)); +#123042 = ORIENTED_EDGE('',*,*,#123043,.F.); +#123043 = EDGE_CURVE('',#123044,#123036,#123046,.T.); +#123044 = VERTEX_POINT('',#123045); +#123045 = CARTESIAN_POINT('',(2.77315,8.5,-1.51744041214)); +#123046 = LINE('',#123047,#123048); +#123047 = CARTESIAN_POINT('',(2.77315,8.5,-1.51744041214)); +#123048 = VECTOR('',#123049,1.); +#123049 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#123050 = ORIENTED_EDGE('',*,*,#123051,.F.); +#123051 = EDGE_CURVE('',#123052,#123044,#123054,.T.); +#123052 = VERTEX_POINT('',#123053); +#123053 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.559568066692)); +#123054 = LINE('',#123055,#123056); +#123055 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.559568066692)); +#123056 = VECTOR('',#123057,1.); +#123057 = DIRECTION('',(0.310279797551,0.,0.950645279393)); +#123058 = ORIENTED_EDGE('',*,*,#123059,.F.); +#123059 = EDGE_CURVE('',#123060,#123052,#123062,.T.); +#123060 = VERTEX_POINT('',#123061); +#123061 = CARTESIAN_POINT('',(2.828149986887,8.5,-1.559568066692)); +#123062 = LINE('',#123063,#123064); +#123063 = CARTESIAN_POINT('',(2.828149986887,8.5,-1.559568066692)); +#123064 = VECTOR('',#123065,1.); +#123065 = DIRECTION('',(-1.,0.,0.)); +#123066 = ORIENTED_EDGE('',*,*,#123067,.F.); +#123067 = EDGE_CURVE('',#123068,#123060,#123070,.T.); +#123068 = VERTEX_POINT('',#123069); +#123069 = CARTESIAN_POINT('',(2.85565,8.5,-1.51744041214)); +#123070 = LINE('',#123071,#123072); +#123071 = CARTESIAN_POINT('',(2.85565,8.5,-1.51744041214)); +#123072 = VECTOR('',#123073,1.); +#123073 = DIRECTION('',(-0.546622729396,0.,-0.837379001234)); +#123074 = ORIENTED_EDGE('',*,*,#123075,.F.); +#123075 = EDGE_CURVE('',#123076,#123068,#123078,.T.); +#123076 = VERTEX_POINT('',#123077); +#123077 = CARTESIAN_POINT('',(2.8969,8.5,-1.489355309105)); +#123078 = LINE('',#123079,#123080); +#123079 = CARTESIAN_POINT('',(2.8969,8.5,-1.489355309105)); +#123080 = VECTOR('',#123081,1.); +#123081 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#123082 = ORIENTED_EDGE('',*,*,#123083,.F.); +#123083 = EDGE_CURVE('',#123084,#123076,#123086,.T.); +#123084 = VERTEX_POINT('',#123085); +#123085 = CARTESIAN_POINT('',(2.93815,8.5,-1.475312757587)); +#123086 = LINE('',#123087,#123088); +#123087 = CARTESIAN_POINT('',(2.93815,8.5,-1.475312757587)); +#123088 = VECTOR('',#123089,1.); +#123089 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#123090 = ORIENTED_EDGE('',*,*,#123091,.F.); +#123091 = EDGE_CURVE('',#123092,#123084,#123094,.T.); +#123092 = VERTEX_POINT('',#123093); +#123093 = CARTESIAN_POINT('',(3.02065,8.5,-1.475312757587)); +#123094 = LINE('',#123095,#123096); +#123095 = CARTESIAN_POINT('',(3.02065,8.5,-1.475312757587)); +#123096 = VECTOR('',#123097,1.); +#123097 = DIRECTION('',(-1.,0.,0.)); +#123098 = ORIENTED_EDGE('',*,*,#123099,.F.); +#123099 = EDGE_CURVE('',#123100,#123092,#123102,.T.); +#123100 = VERTEX_POINT('',#123101); +#123101 = CARTESIAN_POINT('',(3.0619,8.5,-1.489355309105)); +#123102 = LINE('',#123103,#123104); +#123103 = CARTESIAN_POINT('',(3.0619,8.5,-1.489355309105)); +#123104 = VECTOR('',#123105,1.); +#123105 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#123106 = ORIENTED_EDGE('',*,*,#123107,.F.); +#123107 = EDGE_CURVE('',#123108,#123100,#123110,.T.); +#123108 = VERTEX_POINT('',#123109); +#123109 = CARTESIAN_POINT('',(3.10315,8.5,-1.51744041214)); +#123110 = LINE('',#123111,#123112); +#123111 = CARTESIAN_POINT('',(3.10315,8.5,-1.51744041214)); +#123112 = VECTOR('',#123113,1.); +#123113 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#123114 = ORIENTED_EDGE('',*,*,#123115,.F.); +#123115 = EDGE_CURVE('',#123116,#123108,#123118,.T.); +#123116 = VERTEX_POINT('',#123117); +#123117 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.559568066692)); +#123118 = LINE('',#123119,#123120); +#123119 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.559568066692)); +#123120 = VECTOR('',#123121,1.); +#123121 = DIRECTION('',(-0.546622592319,0.,0.837379090715)); +#123122 = ORIENTED_EDGE('',*,*,#123123,.F.); +#123123 = EDGE_CURVE('',#123124,#123116,#123126,.T.); +#123124 = VERTEX_POINT('',#123125); +#123125 = CARTESIAN_POINT('',(3.1444,8.5,-1.601695760584)); +#123126 = LINE('',#123127,#123128); +#123127 = CARTESIAN_POINT('',(3.1444,8.5,-1.601695760584)); +#123128 = VECTOR('',#123129,1.); +#123129 = DIRECTION('',(-0.310279736268,0.,0.950645299395)); +#123130 = ORIENTED_EDGE('',*,*,#123131,.F.); +#123131 = EDGE_CURVE('',#123132,#123124,#123134,.T.); +#123132 = VERTEX_POINT('',#123133); +#123133 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.685951069689)); +#123134 = LINE('',#123135,#123136); +#123135 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.685951069689)); +#123136 = VECTOR('',#123137,1.); +#123137 = DIRECTION('',(-0.16106381521,0.,0.986943994069)); +#123138 = ORIENTED_EDGE('',*,*,#123139,.F.); +#123139 = EDGE_CURVE('',#123140,#123132,#123142,.T.); +#123140 = VERTEX_POINT('',#123141); +#123141 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.714036172724)); +#123142 = LINE('',#123143,#123144); +#123143 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.714036172724)); +#123144 = VECTOR('',#123145,1.); +#123145 = DIRECTION('',(0.,0.,1.)); +#123146 = ORIENTED_EDGE('',*,*,#123147,.F.); +#123147 = EDGE_CURVE('',#123148,#123140,#123150,.T.); +#123148 = VERTEX_POINT('',#123149); +#123149 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.657865966654)); +#123150 = LINE('',#123151,#123152); +#123151 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.657865966654)); +#123152 = VECTOR('',#123153,1.); +#123153 = DIRECTION('',(0.826599294405,0.,-0.562790908322)); +#123154 = ORIENTED_EDGE('',*,*,#123155,.F.); +#123155 = EDGE_CURVE('',#123156,#123148,#123158,.T.); +#123156 = VERTEX_POINT('',#123157); +#123157 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.643823415136)); +#123158 = LINE('',#123159,#123160); +#123159 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.643823415136)); +#123160 = VECTOR('',#123161,1.); +#123161 = DIRECTION('',(0.979770711149,0.,-0.200123345899)); +#123162 = ORIENTED_EDGE('',*,*,#123163,.F.); +#123163 = EDGE_CURVE('',#123164,#123156,#123166,.T.); +#123164 = VERTEX_POINT('',#123165); +#123165 = CARTESIAN_POINT('',(2.93815,8.5,-1.643823415136)); +#123166 = LINE('',#123167,#123168); +#123167 = CARTESIAN_POINT('',(2.93815,8.5,-1.643823415136)); +#123168 = VECTOR('',#123169,1.); +#123169 = DIRECTION('',(1.,0.,0.)); +#123170 = ORIENTED_EDGE('',*,*,#123171,.F.); +#123171 = EDGE_CURVE('',#123172,#123164,#123174,.T.); +#123172 = VERTEX_POINT('',#123173); +#123173 = CARTESIAN_POINT('',(2.869399986887,8.5,-1.657865966654)); +#123174 = LINE('',#123175,#123176); +#123175 = CARTESIAN_POINT('',(2.869399986887,8.5,-1.657865966654)); +#123176 = VECTOR('',#123177,1.); +#123177 = DIRECTION('',(0.979770716763,0.,0.200123318418)); +#123178 = ORIENTED_EDGE('',*,*,#123179,.F.); +#123179 = EDGE_CURVE('',#123180,#123172,#123182,.T.); +#123180 = VERTEX_POINT('',#123181); +#123181 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.699993621206)); +#123182 = LINE('',#123183,#123184); +#123183 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.699993621206)); +#123184 = VECTOR('',#123185,1.); +#123185 = DIRECTION('',(0.85265333382,0.,0.522477073493)); +#123186 = ORIENTED_EDGE('',*,*,#123187,.F.); +#123187 = EDGE_CURVE('',#122876,#123180,#123188,.T.); +#123188 = LINE('',#123189,#123190); +#123189 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.742121275759)); +#123190 = VECTOR('',#123191,1.); +#123191 = DIRECTION('',(0.699624835187,0.,0.714510384802)); +#123192 = FACE_BOUND('',#123193,.T.); +#123193 = EDGE_LOOP('',(#123194,#123204,#123212,#123220,#123228,#123236, + #123244,#123252,#123260,#123268,#123276,#123284,#123292,#123300, + #123308,#123316,#123324,#123332,#123340,#123348,#123356,#123364, + #123372,#123380,#123388,#123396)); +#123194 = ORIENTED_EDGE('',*,*,#123195,.F.); +#123195 = EDGE_CURVE('',#123196,#123198,#123200,.T.); +#123196 = VERTEX_POINT('',#123197); +#123197 = CARTESIAN_POINT('',(2.60815,8.5,-1.601695760584)); +#123198 = VERTEX_POINT('',#123199); +#123199 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.671908518171)); +#123200 = LINE('',#123201,#123202); +#123201 = CARTESIAN_POINT('',(2.60815,8.5,-1.601695760584)); +#123202 = VECTOR('',#123203,1.); +#123203 = DIRECTION('',(0.192182676904,0.,-0.98135916906)); +#123204 = ORIENTED_EDGE('',*,*,#123205,.F.); +#123205 = EDGE_CURVE('',#123206,#123196,#123208,.T.); +#123206 = VERTEX_POINT('',#123207); +#123207 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.559568066692)); +#123208 = LINE('',#123209,#123210); +#123209 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.559568066692)); +#123210 = VECTOR('',#123211,1.); +#123211 = DIRECTION('',(0.310279535704,0.,-0.950645364857)); +#123212 = ORIENTED_EDGE('',*,*,#123213,.F.); +#123213 = EDGE_CURVE('',#123214,#123206,#123216,.T.); +#123214 = VERTEX_POINT('',#123215); +#123215 = CARTESIAN_POINT('',(2.5669,8.5,-1.503397860622)); +#123216 = LINE('',#123217,#123218); +#123217 = CARTESIAN_POINT('',(2.5669,8.5,-1.503397860622)); +#123218 = VECTOR('',#123219,1.); +#123219 = DIRECTION('',(0.439713664957,0.,-0.898138014367)); +#123220 = ORIENTED_EDGE('',*,*,#123221,.F.); +#123221 = EDGE_CURVE('',#123222,#123214,#123224,.T.); +#123222 = VERTEX_POINT('',#123223); +#123223 = CARTESIAN_POINT('',(2.52565,8.5,-1.46127020607)); +#123224 = LINE('',#123225,#123226); +#123225 = CARTESIAN_POINT('',(2.52565,8.5,-1.46127020607)); +#123226 = VECTOR('',#123227,1.); +#123227 = DIRECTION('',(0.699624835187,0.,-0.714510384802)); +#123228 = ORIENTED_EDGE('',*,*,#123229,.F.); +#123229 = EDGE_CURVE('',#123230,#123222,#123232,.T.); +#123230 = VERTEX_POINT('',#123231); +#123231 = CARTESIAN_POINT('',(2.456900026226,8.5,-1.419142551517)); +#123232 = LINE('',#123233,#123234); +#123233 = CARTESIAN_POINT('',(2.456900026226,8.5,-1.419142551517)); +#123234 = VECTOR('',#123235,1.); +#123235 = DIRECTION('',(0.85265333382,0.,-0.522477073493)); +#123236 = ORIENTED_EDGE('',*,*,#123237,.F.); +#123237 = EDGE_CURVE('',#123238,#123230,#123240,.T.); +#123238 = VERTEX_POINT('',#123239); +#123239 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.4051)); +#123240 = LINE('',#123241,#123242); +#123241 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.4051)); +#123242 = VECTOR('',#123243,1.); +#123243 = DIRECTION('',(0.985821173093,0.,-0.167799328608)); +#123244 = ORIENTED_EDGE('',*,*,#123245,.F.); +#123245 = EDGE_CURVE('',#123246,#123238,#123248,.T.); +#123246 = VERTEX_POINT('',#123247); +#123247 = CARTESIAN_POINT('',(2.291900026226,8.5,-1.419142551517)); +#123248 = LINE('',#123249,#123250); +#123249 = CARTESIAN_POINT('',(2.291900026226,8.5,-1.419142551517)); +#123250 = VECTOR('',#123251,1.); +#123251 = DIRECTION('',(0.985821173093,0.,0.167799328608)); +#123252 = ORIENTED_EDGE('',*,*,#123253,.F.); +#123253 = EDGE_CURVE('',#123254,#123246,#123256,.T.); +#123254 = VERTEX_POINT('',#123255); +#123255 = CARTESIAN_POINT('',(2.223149973774,8.5,-1.46127020607)); +#123256 = LINE('',#123257,#123258); +#123257 = CARTESIAN_POINT('',(2.223149973774,8.5,-1.46127020607)); +#123258 = VECTOR('',#123259,1.); +#123259 = DIRECTION('',(0.852653600191,0.,0.52247663879)); +#123260 = ORIENTED_EDGE('',*,*,#123261,.F.); +#123261 = EDGE_CURVE('',#123262,#123254,#123264,.T.); +#123262 = VERTEX_POINT('',#123263); +#123263 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.503397860622)); +#123264 = LINE('',#123265,#123266); +#123265 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.503397860622)); +#123266 = VECTOR('',#123267,1.); +#123267 = DIRECTION('',(0.699624835187,0.,0.714510384802)); +#123268 = ORIENTED_EDGE('',*,*,#123269,.F.); +#123269 = EDGE_CURVE('',#123270,#123262,#123272,.T.); +#123270 = VERTEX_POINT('',#123271); +#123271 = CARTESIAN_POINT('',(2.1544,8.5,-1.559568066692)); +#123272 = LINE('',#123273,#123274); +#123273 = CARTESIAN_POINT('',(2.1544,8.5,-1.559568066692)); +#123274 = VECTOR('',#123275,1.); +#123275 = DIRECTION('',(0.43971315756,0.,0.898138262779)); +#123276 = ORIENTED_EDGE('',*,*,#123277,.F.); +#123277 = EDGE_CURVE('',#123278,#123270,#123280,.T.); +#123278 = VERTEX_POINT('',#123279); +#123279 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.601695760584)); +#123280 = LINE('',#123281,#123282); +#123281 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.601695760584)); +#123282 = VECTOR('',#123283,1.); +#123283 = DIRECTION('',(0.310280337958,0.,0.95064510301)); +#123284 = ORIENTED_EDGE('',*,*,#123285,.F.); +#123285 = EDGE_CURVE('',#123286,#123278,#123288,.T.); +#123286 = VERTEX_POINT('',#123287); +#123287 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.671908518171)); +#123288 = LINE('',#123289,#123290); +#123289 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.671908518171)); +#123290 = VECTOR('',#123291,1.); +#123291 = DIRECTION('',(0.192182147373,0.,0.98135927276)); +#123292 = ORIENTED_EDGE('',*,*,#123293,.F.); +#123293 = EDGE_CURVE('',#123294,#123286,#123296,.T.); +#123294 = VERTEX_POINT('',#123295); +#123295 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.798291481829)); +#123296 = LINE('',#123297,#123298); +#123297 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.798291481829)); +#123298 = VECTOR('',#123299,1.); +#123299 = DIRECTION('',(0.,0.,1.)); +#123300 = ORIENTED_EDGE('',*,*,#123301,.F.); +#123301 = EDGE_CURVE('',#123302,#123294,#123304,.T.); +#123302 = VERTEX_POINT('',#123303); +#123303 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.868504259086)); +#123304 = LINE('',#123305,#123306); +#123305 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.868504259086)); +#123306 = VECTOR('',#123307,1.); +#123307 = DIRECTION('',(-0.192182095523,0.,0.981359282913)); +#123308 = ORIENTED_EDGE('',*,*,#123309,.F.); +#123309 = EDGE_CURVE('',#123310,#123302,#123312,.T.); +#123310 = VERTEX_POINT('',#123311); +#123311 = CARTESIAN_POINT('',(2.1544,8.5,-1.910631913638)); +#123312 = LINE('',#123313,#123314); +#123313 = CARTESIAN_POINT('',(2.1544,8.5,-1.910631913638)); +#123314 = VECTOR('',#123315,1.); +#123315 = DIRECTION('',(-0.310280599805,0.,0.950645017546)); +#123316 = ORIENTED_EDGE('',*,*,#123317,.F.); +#123317 = EDGE_CURVE('',#123318,#123310,#123320,.T.); +#123318 = VERTEX_POINT('',#123319); +#123319 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.966802129543)); +#123320 = LINE('',#123321,#123322); +#123321 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.966802129543)); +#123322 = VECTOR('',#123323,1.); +#123323 = DIRECTION('',(-0.439713095457,0.,0.898138293184)); +#123324 = ORIENTED_EDGE('',*,*,#123325,.F.); +#123325 = EDGE_CURVE('',#123326,#123318,#123328,.T.); +#123326 = VERTEX_POINT('',#123327); +#123327 = CARTESIAN_POINT('',(2.223149973774,8.5,-2.008929789013)); +#123328 = LINE('',#123329,#123330); +#123329 = CARTESIAN_POINT('',(2.223149973774,8.5,-2.008929789013)); +#123330 = VECTOR('',#123331,1.); +#123331 = DIRECTION('',(-0.699624793495,0.,0.714510425625)); +#123332 = ORIENTED_EDGE('',*,*,#123333,.F.); +#123333 = EDGE_CURVE('',#123334,#123326,#123336,.T.); +#123334 = VERTEX_POINT('',#123335); +#123335 = CARTESIAN_POINT('',(2.291900026226,8.5,-2.051057447253)); +#123336 = LINE('',#123337,#123338); +#123337 = CARTESIAN_POINT('',(2.291900026226,8.5,-2.051057447253)); +#123338 = VECTOR('',#123339,1.); +#123339 = DIRECTION('',(-0.852653579815,0.,0.522476672043)); +#123340 = ORIENTED_EDGE('',*,*,#123341,.F.); +#123341 = EDGE_CURVE('',#123342,#123334,#123344,.T.); +#123342 = VERTEX_POINT('',#123343); +#123343 = CARTESIAN_POINT('',(2.374400026226,8.5,-2.0651)); +#123344 = LINE('',#123345,#123346); +#123345 = CARTESIAN_POINT('',(2.374400026226,8.5,-2.0651)); +#123346 = VECTOR('',#123347,1.); +#123347 = DIRECTION('',(-0.985821170663,0.,0.167799342885)); +#123348 = ORIENTED_EDGE('',*,*,#123349,.F.); +#123349 = EDGE_CURVE('',#123350,#123342,#123352,.T.); +#123350 = VERTEX_POINT('',#123351); +#123351 = CARTESIAN_POINT('',(2.456900026226,8.5,-2.051057447253)); +#123352 = LINE('',#123353,#123354); +#123353 = CARTESIAN_POINT('',(2.456900026226,8.5,-2.051057447253)); +#123354 = VECTOR('',#123355,1.); +#123355 = DIRECTION('',(-0.985821170663,0.,-0.167799342885)); +#123356 = ORIENTED_EDGE('',*,*,#123357,.F.); +#123357 = EDGE_CURVE('',#123358,#123350,#123360,.T.); +#123358 = VERTEX_POINT('',#123359); +#123359 = CARTESIAN_POINT('',(2.52565,8.5,-2.008929789013)); +#123360 = LINE('',#123361,#123362); +#123361 = CARTESIAN_POINT('',(2.52565,8.5,-2.008929789013)); +#123362 = VECTOR('',#123363,1.); +#123363 = DIRECTION('',(-0.852653313443,0.,-0.522477106747)); +#123364 = ORIENTED_EDGE('',*,*,#123365,.F.); +#123365 = EDGE_CURVE('',#123366,#123358,#123368,.T.); +#123366 = VERTEX_POINT('',#123367); +#123367 = CARTESIAN_POINT('',(2.5669,8.5,-1.966802129543)); +#123368 = LINE('',#123369,#123370); +#123369 = CARTESIAN_POINT('',(2.5669,8.5,-1.966802129543)); +#123370 = VECTOR('',#123371,1.); +#123371 = DIRECTION('',(-0.699624793495,0.,-0.714510425625)); +#123372 = ORIENTED_EDGE('',*,*,#123373,.F.); +#123373 = EDGE_CURVE('',#123374,#123366,#123376,.T.); +#123374 = VERTEX_POINT('',#123375); +#123375 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.910631913638)); +#123376 = LINE('',#123377,#123378); +#123377 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.910631913638)); +#123378 = VECTOR('',#123379,1.); +#123379 = DIRECTION('',(-0.439713602853,0.,-0.898138044771)); +#123380 = ORIENTED_EDGE('',*,*,#123381,.F.); +#123381 = EDGE_CURVE('',#123382,#123374,#123384,.T.); +#123382 = VERTEX_POINT('',#123383); +#123383 = CARTESIAN_POINT('',(2.60815,8.5,-1.868504259086)); +#123384 = LINE('',#123385,#123386); +#123385 = CARTESIAN_POINT('',(2.60815,8.5,-1.868504259086)); +#123386 = VECTOR('',#123387,1.); +#123387 = DIRECTION('',(-0.310279797551,0.,-0.950645279393)); +#123388 = ORIENTED_EDGE('',*,*,#123389,.F.); +#123389 = EDGE_CURVE('',#123390,#123382,#123392,.T.); +#123390 = VERTEX_POINT('',#123391); +#123391 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.798291481829)); +#123392 = LINE('',#123393,#123394); +#123393 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.798291481829)); +#123394 = VECTOR('',#123395,1.); +#123395 = DIRECTION('',(-0.192182625054,0.,-0.981359179214)); +#123396 = ORIENTED_EDGE('',*,*,#123397,.F.); +#123397 = EDGE_CURVE('',#123198,#123390,#123398,.T.); +#123398 = LINE('',#123399,#123400); +#123399 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.671908518171)); +#123400 = VECTOR('',#123401,1.); +#123401 = DIRECTION('',(0.,0.,-1.)); +#123402 = PLANE('',#123403); +#123403 = AXIS2_PLACEMENT_3D('',#123404,#123405,#123406); +#123404 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#123405 = DIRECTION('',(-0.,1.,0.)); +#123406 = DIRECTION('',(1.,0.,0.)); +#123407 = ADVANCED_FACE('',(#123408),#123570,.T.); +#123408 = FACE_BOUND('',#123409,.T.); +#123409 = EDGE_LOOP('',(#123410,#123420,#123428,#123436,#123444,#123452, + #123460,#123468,#123476,#123484,#123492,#123500,#123508,#123516, + #123524,#123532,#123540,#123548,#123556,#123564)); +#123410 = ORIENTED_EDGE('',*,*,#123411,.F.); +#123411 = EDGE_CURVE('',#123412,#123414,#123416,.T.); +#123412 = VERTEX_POINT('',#123413); +#123413 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.756163827276)); +#123414 = VERTEX_POINT('',#123415); +#123415 = CARTESIAN_POINT('',(2.8144,8.5,-1.784248930311)); +#123416 = LINE('',#123417,#123418); +#123417 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.756163827276)); +#123418 = VECTOR('',#123419,1.); +#123419 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#123420 = ORIENTED_EDGE('',*,*,#123421,.F.); +#123421 = EDGE_CURVE('',#123422,#123412,#123424,.T.); +#123422 = VERTEX_POINT('',#123423); +#123423 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.728078724241)); +#123424 = LINE('',#123425,#123426); +#123425 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.728078724241)); +#123426 = VECTOR('',#123427,1.); +#123427 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#123428 = ORIENTED_EDGE('',*,*,#123429,.F.); +#123429 = EDGE_CURVE('',#123430,#123422,#123432,.T.); +#123430 = VERTEX_POINT('',#123431); +#123431 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.714036172724)); +#123432 = LINE('',#123433,#123434); +#123433 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.714036172724)); +#123434 = VECTOR('',#123435,1.); +#123435 = DIRECTION('',(-0.946649870891,0.,-0.322263901086)); +#123436 = ORIENTED_EDGE('',*,*,#123437,.F.); +#123437 = EDGE_CURVE('',#123438,#123430,#123440,.T.); +#123438 = VERTEX_POINT('',#123439); +#123439 = CARTESIAN_POINT('',(3.02065,8.5,-1.714036172724)); +#123440 = LINE('',#123441,#123442); +#123441 = CARTESIAN_POINT('',(3.02065,8.5,-1.714036172724)); +#123442 = VECTOR('',#123443,1.); +#123443 = DIRECTION('',(-1.,0.,0.)); +#123444 = ORIENTED_EDGE('',*,*,#123445,.F.); +#123445 = EDGE_CURVE('',#123446,#123438,#123448,.T.); +#123446 = VERTEX_POINT('',#123447); +#123447 = CARTESIAN_POINT('',(3.0619,8.5,-1.728078724241)); +#123448 = LINE('',#123449,#123450); +#123449 = CARTESIAN_POINT('',(3.0619,8.5,-1.728078724241)); +#123450 = VECTOR('',#123451,1.); +#123451 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#123452 = ORIENTED_EDGE('',*,*,#123453,.F.); +#123453 = EDGE_CURVE('',#123454,#123446,#123456,.T.); +#123454 = VERTEX_POINT('',#123455); +#123455 = CARTESIAN_POINT('',(3.10315,8.5,-1.756163827276)); +#123456 = LINE('',#123457,#123458); +#123457 = CARTESIAN_POINT('',(3.10315,8.5,-1.756163827276)); +#123458 = VECTOR('',#123459,1.); +#123459 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#123460 = ORIENTED_EDGE('',*,*,#123461,.F.); +#123461 = EDGE_CURVE('',#123462,#123454,#123464,.T.); +#123462 = VERTEX_POINT('',#123463); +#123463 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.784248930311)); +#123464 = LINE('',#123465,#123466); +#123465 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.784248930311)); +#123466 = VECTOR('',#123467,1.); +#123467 = DIRECTION('',(-0.699624877766,0.,0.71451034311)); +#123468 = ORIENTED_EDGE('',*,*,#123469,.F.); +#123469 = EDGE_CURVE('',#123470,#123462,#123472,.T.); +#123470 = VERTEX_POINT('',#123471); +#123471 = CARTESIAN_POINT('',(3.1444,8.5,-1.826376604533)); +#123472 = LINE('',#123473,#123474); +#123473 = CARTESIAN_POINT('',(3.1444,8.5,-1.826376604533)); +#123474 = VECTOR('',#123475,1.); +#123475 = DIRECTION('',(-0.310279867191,0.,0.950645256663)); +#123476 = ORIENTED_EDGE('',*,*,#123477,.F.); +#123477 = EDGE_CURVE('',#123478,#123470,#123480,.T.); +#123478 = VERTEX_POINT('',#123479); +#123479 = CARTESIAN_POINT('',(3.1444,8.5,-1.868504259086)); +#123480 = LINE('',#123481,#123482); +#123481 = CARTESIAN_POINT('',(3.1444,8.5,-1.868504259086)); +#123482 = VECTOR('',#123483,1.); +#123483 = DIRECTION('',(0.,0.,1.)); +#123484 = ORIENTED_EDGE('',*,*,#123485,.F.); +#123485 = EDGE_CURVE('',#123486,#123478,#123488,.T.); +#123486 = VERTEX_POINT('',#123487); +#123487 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.910631913638)); +#123488 = LINE('',#123489,#123490); +#123489 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.910631913638)); +#123490 = VECTOR('',#123491,1.); +#123491 = DIRECTION('',(0.310279998114,0.,0.950645213931)); +#123492 = ORIENTED_EDGE('',*,*,#123493,.F.); +#123493 = EDGE_CURVE('',#123494,#123486,#123496,.T.); +#123494 = VERTEX_POINT('',#123495); +#123495 = CARTESIAN_POINT('',(3.10315,8.5,-1.952759578025)); +#123496 = LINE('',#123497,#123498); +#123497 = CARTESIAN_POINT('',(3.10315,8.5,-1.952759578025)); +#123498 = VECTOR('',#123499,1.); +#123499 = DIRECTION('',(0.546622502839,0.,0.837379149126)); +#123500 = ORIENTED_EDGE('',*,*,#123501,.F.); +#123501 = EDGE_CURVE('',#123502,#123494,#123504,.T.); +#123502 = VERTEX_POINT('',#123503); +#123503 = CARTESIAN_POINT('',(3.0619,8.5,-1.98084468106)); +#123504 = LINE('',#123505,#123506); +#123505 = CARTESIAN_POINT('',(3.0619,8.5,-1.98084468106)); +#123506 = VECTOR('',#123507,1.); +#123507 = DIRECTION('',(0.8265992788,0.,0.562790931242)); +#123508 = ORIENTED_EDGE('',*,*,#123509,.F.); +#123509 = EDGE_CURVE('',#123510,#123502,#123512,.T.); +#123510 = VERTEX_POINT('',#123511); +#123511 = CARTESIAN_POINT('',(3.02065,8.5,-1.994887232578)); +#123512 = LINE('',#123513,#123514); +#123513 = CARTESIAN_POINT('',(3.02065,8.5,-1.994887232578)); +#123514 = VECTOR('',#123515,1.); +#123515 = DIRECTION('',(0.94664991777,0.,0.322263763377)); +#123516 = ORIENTED_EDGE('',*,*,#123517,.F.); +#123517 = EDGE_CURVE('',#123518,#123510,#123520,.T.); +#123518 = VERTEX_POINT('',#123519); +#123519 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.994887232578)); +#123520 = LINE('',#123521,#123522); +#123521 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.994887232578)); +#123522 = VECTOR('',#123523,1.); +#123523 = DIRECTION('',(1.,0.,0.)); +#123524 = ORIENTED_EDGE('',*,*,#123525,.F.); +#123525 = EDGE_CURVE('',#123526,#123518,#123528,.T.); +#123526 = VERTEX_POINT('',#123527); +#123527 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.98084468106)); +#123528 = LINE('',#123529,#123530); +#123529 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.98084468106)); +#123530 = VECTOR('',#123531,1.); +#123531 = DIRECTION('',(0.946649870891,0.,-0.322263901086)); +#123532 = ORIENTED_EDGE('',*,*,#123533,.F.); +#123533 = EDGE_CURVE('',#123534,#123526,#123536,.T.); +#123534 = VERTEX_POINT('',#123535); +#123535 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.952759578025)); +#123536 = LINE('',#123537,#123538); +#123537 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.952759578025)); +#123538 = VECTOR('',#123539,1.); +#123539 = DIRECTION('',(0.8265992788,0.,-0.562790931242)); +#123540 = ORIENTED_EDGE('',*,*,#123541,.F.); +#123541 = EDGE_CURVE('',#123542,#123534,#123544,.T.); +#123542 = VERTEX_POINT('',#123543); +#123543 = CARTESIAN_POINT('',(2.8144,8.5,-1.910631913638)); +#123544 = LINE('',#123545,#123546); +#123545 = CARTESIAN_POINT('',(2.8144,8.5,-1.910631913638)); +#123546 = VECTOR('',#123547,1.); +#123547 = DIRECTION('',(0.546622639915,0.,-0.837379059645)); +#123548 = ORIENTED_EDGE('',*,*,#123549,.F.); +#123549 = EDGE_CURVE('',#123550,#123542,#123552,.T.); +#123550 = VERTEX_POINT('',#123551); +#123551 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.868504259086)); +#123552 = LINE('',#123553,#123554); +#123553 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.868504259086)); +#123554 = VECTOR('',#123555,1.); +#123555 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#123556 = ORIENTED_EDGE('',*,*,#123557,.F.); +#123557 = EDGE_CURVE('',#123558,#123550,#123560,.T.); +#123558 = VERTEX_POINT('',#123559); +#123559 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.826376604533)); +#123560 = LINE('',#123561,#123562); +#123561 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.826376604533)); +#123562 = VECTOR('',#123563,1.); +#123563 = DIRECTION('',(0.,0.,-1.)); +#123564 = ORIENTED_EDGE('',*,*,#123565,.F.); +#123565 = EDGE_CURVE('',#123414,#123558,#123566,.T.); +#123566 = LINE('',#123567,#123568); +#123567 = CARTESIAN_POINT('',(2.8144,8.5,-1.784248930311)); +#123568 = VECTOR('',#123569,1.); +#123569 = DIRECTION('',(-0.310279666627,0.,-0.950645322125)); +#123570 = PLANE('',#123571); +#123571 = AXIS2_PLACEMENT_3D('',#123572,#123573,#123574); +#123572 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#123573 = DIRECTION('',(-0.,1.,0.)); +#123574 = DIRECTION('',(1.,0.,0.)); +#123575 = ADVANCED_FACE('',(#123576),#123722,.T.); +#123576 = FACE_BOUND('',#123577,.T.); +#123577 = EDGE_LOOP('',(#123578,#123588,#123596,#123604,#123612,#123620, + #123628,#123636,#123644,#123652,#123660,#123668,#123676,#123684, + #123692,#123700,#123708,#123716)); +#123578 = ORIENTED_EDGE('',*,*,#123579,.F.); +#123579 = EDGE_CURVE('',#123580,#123582,#123584,.T.); +#123580 = VERTEX_POINT('',#123581); +#123581 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.784248930311)); +#123582 = VERTEX_POINT('',#123583); +#123583 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.685951069689)); +#123584 = LINE('',#123585,#123586); +#123585 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.784248930311)); +#123586 = VECTOR('',#123587,1.); +#123587 = DIRECTION('',(0.,0.,1.)); +#123588 = ORIENTED_EDGE('',*,*,#123589,.F.); +#123589 = EDGE_CURVE('',#123590,#123580,#123592,.T.); +#123590 = VERTEX_POINT('',#123591); +#123591 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.868504259086)); +#123592 = LINE('',#123593,#123594); +#123593 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.868504259086)); +#123594 = VECTOR('',#123595,1.); +#123595 = DIRECTION('',(0.161063161412,0.,0.986944100766)); +#123596 = ORIENTED_EDGE('',*,*,#123597,.F.); +#123597 = EDGE_CURVE('',#123598,#123590,#123600,.T.); +#123598 = VERTEX_POINT('',#123599); +#123599 = CARTESIAN_POINT('',(2.4844,8.5,-1.952759578025)); +#123600 = LINE('',#123601,#123602); +#123601 = CARTESIAN_POINT('',(2.4844,8.5,-1.952759578025)); +#123602 = VECTOR('',#123603,1.); +#123603 = DIRECTION('',(0.546622684656,0.,0.83737903044)); +#123604 = ORIENTED_EDGE('',*,*,#123605,.F.); +#123605 = EDGE_CURVE('',#123606,#123598,#123608,.T.); +#123606 = VERTEX_POINT('',#123607); +#123607 = CARTESIAN_POINT('',(2.44315,8.5,-1.98084468106)); +#123608 = LINE('',#123609,#123610); +#123609 = CARTESIAN_POINT('',(2.44315,8.5,-1.98084468106)); +#123610 = VECTOR('',#123611,1.); +#123611 = DIRECTION('',(0.8265992788,0.,0.562790931242)); +#123612 = ORIENTED_EDGE('',*,*,#123613,.F.); +#123613 = EDGE_CURVE('',#123614,#123606,#123616,.T.); +#123614 = VERTEX_POINT('',#123615); +#123615 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.994887232578)); +#123616 = LINE('',#123617,#123618); +#123617 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.994887232578)); +#123618 = VECTOR('',#123619,1.); +#123619 = DIRECTION('',(0.97977069431,0.,0.200123428343)); +#123620 = ORIENTED_EDGE('',*,*,#123621,.F.); +#123621 = EDGE_CURVE('',#123622,#123614,#123624,.T.); +#123622 = VERTEX_POINT('',#123623); +#123623 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.98084468106)); +#123624 = LINE('',#123625,#123626); +#123625 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.98084468106)); +#123626 = VECTOR('',#123627,1.); +#123627 = DIRECTION('',(0.979770739215,0.,-0.200123208493)); +#123628 = ORIENTED_EDGE('',*,*,#123629,.F.); +#123629 = EDGE_CURVE('',#123630,#123622,#123632,.T.); +#123630 = VERTEX_POINT('',#123631); +#123631 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.952759578025)); +#123632 = LINE('',#123633,#123634); +#123633 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.952759578025)); +#123634 = VECTOR('',#123635,1.); +#123635 = DIRECTION('',(0.8265992788,0.,-0.562790931242)); +#123636 = ORIENTED_EDGE('',*,*,#123637,.F.); +#123637 = EDGE_CURVE('',#123638,#123630,#123640,.T.); +#123638 = VERTEX_POINT('',#123639); +#123639 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.868504259086)); +#123640 = LINE('',#123641,#123642); +#123641 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.868504259086)); +#123642 = VECTOR('',#123643,1.); +#123643 = DIRECTION('',(0.546622136349,0.,-0.837379388362)); +#123644 = ORIENTED_EDGE('',*,*,#123645,.F.); +#123645 = EDGE_CURVE('',#123646,#123638,#123648,.T.); +#123646 = VERTEX_POINT('',#123647); +#123647 = CARTESIAN_POINT('',(2.19565,8.5,-1.784248930311)); +#123648 = LINE('',#123649,#123650); +#123649 = CARTESIAN_POINT('',(2.19565,8.5,-1.784248930311)); +#123650 = VECTOR('',#123651,1.); +#123651 = DIRECTION('',(0.161064059119,0.,-0.986943954265)); +#123652 = ORIENTED_EDGE('',*,*,#123653,.F.); +#123653 = EDGE_CURVE('',#123654,#123646,#123656,.T.); +#123654 = VERTEX_POINT('',#123655); +#123655 = CARTESIAN_POINT('',(2.19565,8.5,-1.685951069689)); +#123656 = LINE('',#123657,#123658); +#123657 = CARTESIAN_POINT('',(2.19565,8.5,-1.685951069689)); +#123658 = VECTOR('',#123659,1.); +#123659 = DIRECTION('',(0.,0.,-1.)); +#123660 = ORIENTED_EDGE('',*,*,#123661,.F.); +#123661 = EDGE_CURVE('',#123662,#123654,#123664,.T.); +#123662 = VERTEX_POINT('',#123663); +#123663 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.601695760584)); +#123664 = LINE('',#123665,#123666); +#123665 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.601695760584)); +#123666 = VECTOR('',#123667,1.); +#123667 = DIRECTION('',(-0.161064095744,0.,-0.986943948288)); +#123668 = ORIENTED_EDGE('',*,*,#123669,.F.); +#123669 = EDGE_CURVE('',#123670,#123662,#123672,.T.); +#123670 = VERTEX_POINT('',#123671); +#123671 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.51744041214)); +#123672 = LINE('',#123673,#123674); +#123673 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.51744041214)); +#123674 = VECTOR('',#123675,1.); +#123675 = DIRECTION('',(-0.546622002129,0.,-0.837379475978)); +#123676 = ORIENTED_EDGE('',*,*,#123677,.F.); +#123677 = EDGE_CURVE('',#123678,#123670,#123680,.T.); +#123678 = VERTEX_POINT('',#123679); +#123679 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.489355309105)); +#123680 = LINE('',#123681,#123682); +#123681 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.489355309105)); +#123682 = VECTOR('',#123683,1.); +#123683 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#123684 = ORIENTED_EDGE('',*,*,#123685,.F.); +#123685 = EDGE_CURVE('',#123686,#123678,#123688,.T.); +#123686 = VERTEX_POINT('',#123687); +#123687 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.475312757587)); +#123688 = LINE('',#123689,#123690); +#123689 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.475312757587)); +#123690 = VECTOR('',#123691,1.); +#123691 = DIRECTION('',(-0.979770739215,0.,-0.200123208493)); +#123692 = ORIENTED_EDGE('',*,*,#123693,.F.); +#123693 = EDGE_CURVE('',#123694,#123686,#123696,.T.); +#123694 = VERTEX_POINT('',#123695); +#123695 = CARTESIAN_POINT('',(2.44315,8.5,-1.489355309105)); +#123696 = LINE('',#123697,#123698); +#123697 = CARTESIAN_POINT('',(2.44315,8.5,-1.489355309105)); +#123698 = VECTOR('',#123699,1.); +#123699 = DIRECTION('',(-0.97977069431,0.,0.200123428343)); +#123700 = ORIENTED_EDGE('',*,*,#123701,.F.); +#123701 = EDGE_CURVE('',#123702,#123694,#123704,.T.); +#123702 = VERTEX_POINT('',#123703); +#123703 = CARTESIAN_POINT('',(2.4844,8.5,-1.51744041214)); +#123704 = LINE('',#123705,#123706); +#123705 = CARTESIAN_POINT('',(2.4844,8.5,-1.51744041214)); +#123706 = VECTOR('',#123707,1.); +#123707 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#123708 = ORIENTED_EDGE('',*,*,#123709,.F.); +#123709 = EDGE_CURVE('',#123710,#123702,#123712,.T.); +#123710 = VERTEX_POINT('',#123711); +#123711 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.601695760584)); +#123712 = LINE('',#123713,#123714); +#123713 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.601695760584)); +#123714 = VECTOR('',#123715,1.); +#123715 = DIRECTION('',(-0.546622550435,0.,0.837379118056)); +#123716 = ORIENTED_EDGE('',*,*,#123717,.F.); +#123717 = EDGE_CURVE('',#123582,#123710,#123718,.T.); +#123718 = LINE('',#123719,#123720); +#123719 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.685951069689)); +#123720 = VECTOR('',#123721,1.); +#123721 = DIRECTION('',(-0.161063198037,0.,0.986944094789)); +#123722 = PLANE('',#123723); +#123723 = AXIS2_PLACEMENT_3D('',#123724,#123725,#123726); +#123724 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#123725 = DIRECTION('',(-0.,1.,0.)); +#123726 = DIRECTION('',(1.,0.,0.)); +#123727 = ADVANCED_FACE('',(#123728),#123810,.T.); +#123728 = FACE_BOUND('',#123729,.T.); +#123729 = EDGE_LOOP('',(#123730,#123740,#123748,#123756,#123764,#123772, + #123780,#123788,#123796,#123804)); +#123730 = ORIENTED_EDGE('',*,*,#123731,.F.); +#123731 = EDGE_CURVE('',#123732,#123734,#123736,.T.); +#123732 = VERTEX_POINT('',#123733); +#123733 = CARTESIAN_POINT('',(-2.4573,8.5,-1.660419154263)); +#123734 = VERTEX_POINT('',#123735); +#123735 = CARTESIAN_POINT('',(-2.4573,8.5,-1.48169573555)); +#123736 = LINE('',#123737,#123738); +#123737 = CARTESIAN_POINT('',(-2.4573,8.5,-1.660419154263)); +#123738 = VECTOR('',#123739,1.); +#123739 = DIRECTION('',(0.,0.,1.)); +#123740 = ORIENTED_EDGE('',*,*,#123741,.F.); +#123741 = EDGE_CURVE('',#123742,#123732,#123744,.T.); +#123742 = VERTEX_POINT('',#123743); +#123743 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.660419154263)); +#123744 = LINE('',#123745,#123746); +#123745 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.660419154263)); +#123746 = VECTOR('',#123747,1.); +#123747 = DIRECTION('',(1.,0.,0.)); +#123748 = ORIENTED_EDGE('',*,*,#123749,.F.); +#123749 = EDGE_CURVE('',#123750,#123742,#123752,.T.); +#123750 = VERTEX_POINT('',#123751); +#123751 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.647653198338)); +#123752 = LINE('',#123753,#123754); +#123753 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.647653198338)); +#123754 = VECTOR('',#123755,1.); +#123755 = DIRECTION('',(0.94664991777,0.,-0.322263763377)); +#123756 = ORIENTED_EDGE('',*,*,#123757,.F.); +#123757 = EDGE_CURVE('',#123758,#123750,#123760,.T.); +#123758 = VERTEX_POINT('',#123759); +#123759 = CARTESIAN_POINT('',(-2.7573,8.5,-1.622121286488)); +#123760 = LINE('',#123761,#123762); +#123761 = CARTESIAN_POINT('',(-2.7573,8.5,-1.622121286488)); +#123762 = VECTOR('',#123763,1.); +#123763 = DIRECTION('',(0.699625005502,0.,-0.714510218035)); +#123764 = ORIENTED_EDGE('',*,*,#123765,.F.); +#123765 = EDGE_CURVE('',#123766,#123758,#123768,.T.); +#123766 = VERTEX_POINT('',#123767); +#123767 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.583823418713)); +#123768 = LINE('',#123769,#123770); +#123769 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.583823418713)); +#123770 = VECTOR('',#123771,1.); +#123771 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#123772 = ORIENTED_EDGE('',*,*,#123773,.F.); +#123773 = EDGE_CURVE('',#123774,#123766,#123776,.T.); +#123774 = VERTEX_POINT('',#123775); +#123775 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.558291506863)); +#123776 = LINE('',#123777,#123778); +#123777 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.558291506863)); +#123778 = VECTOR('',#123779,1.); +#123779 = DIRECTION('',(0.,0.,-1.)); +#123780 = ORIENTED_EDGE('',*,*,#123781,.F.); +#123781 = EDGE_CURVE('',#123782,#123774,#123784,.T.); +#123782 = VERTEX_POINT('',#123783); +#123783 = CARTESIAN_POINT('',(-2.7573,8.5,-1.519993603325)); +#123784 = LINE('',#123785,#123786); +#123785 = CARTESIAN_POINT('',(-2.7573,8.5,-1.519993603325)); +#123786 = VECTOR('',#123787,1.); +#123787 = DIRECTION('',(-0.310279535704,0.,-0.950645364857)); +#123788 = ORIENTED_EDGE('',*,*,#123789,.F.); +#123789 = EDGE_CURVE('',#123790,#123782,#123792,.T.); +#123790 = VERTEX_POINT('',#123791); +#123791 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.494461691475)); +#123792 = LINE('',#123793,#123794); +#123793 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.494461691475)); +#123794 = VECTOR('',#123795,1.); +#123795 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#123796 = ORIENTED_EDGE('',*,*,#123797,.F.); +#123797 = EDGE_CURVE('',#123798,#123790,#123800,.T.); +#123798 = VERTEX_POINT('',#123799); +#123799 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.48169573555)); +#123800 = LINE('',#123801,#123802); +#123801 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.48169573555)); +#123802 = VECTOR('',#123803,1.); +#123803 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#123804 = ORIENTED_EDGE('',*,*,#123805,.F.); +#123805 = EDGE_CURVE('',#123734,#123798,#123806,.T.); +#123806 = LINE('',#123807,#123808); +#123807 = CARTESIAN_POINT('',(-2.4573,8.5,-1.48169573555)); +#123808 = VECTOR('',#123809,1.); +#123809 = DIRECTION('',(-1.,0.,0.)); +#123810 = PLANE('',#123811); +#123811 = AXIS2_PLACEMENT_3D('',#123812,#123813,#123814); +#123812 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#123813 = DIRECTION('',(-0.,1.,0.)); +#123814 = DIRECTION('',(1.,0.,0.)); +#123815 = ADVANCED_FACE('',(#123816),#123898,.T.); +#123816 = FACE_BOUND('',#123817,.T.); +#123817 = EDGE_LOOP('',(#123818,#123828,#123836,#123844,#123852,#123860, + #123868,#123876,#123884,#123892)); +#123818 = ORIENTED_EDGE('',*,*,#123819,.F.); +#123819 = EDGE_CURVE('',#123820,#123822,#123824,.T.); +#123820 = VERTEX_POINT('',#123821); +#123821 = CARTESIAN_POINT('',(-2.7573,8.5,-1.775312757587)); +#123822 = VERTEX_POINT('',#123823); +#123823 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.813610643244)); +#123824 = LINE('',#123825,#123826); +#123825 = CARTESIAN_POINT('',(-2.7573,8.5,-1.775312757587)); +#123826 = VECTOR('',#123827,1.); +#123827 = DIRECTION('',(-0.310279666627,0.,-0.950645322125)); +#123828 = ORIENTED_EDGE('',*,*,#123829,.F.); +#123829 = EDGE_CURVE('',#123830,#123820,#123832,.T.); +#123830 = VERTEX_POINT('',#123831); +#123831 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.749780845737)); +#123832 = LINE('',#123833,#123834); +#123833 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.749780845737)); +#123834 = VECTOR('',#123835,1.); +#123835 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#123836 = ORIENTED_EDGE('',*,*,#123837,.F.); +#123837 = EDGE_CURVE('',#123838,#123830,#123840,.T.); +#123838 = VERTEX_POINT('',#123839); +#123839 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.737014889812)); +#123840 = LINE('',#123841,#123842); +#123841 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.737014889812)); +#123842 = VECTOR('',#123843,1.); +#123843 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#123844 = ORIENTED_EDGE('',*,*,#123845,.F.); +#123845 = EDGE_CURVE('',#123846,#123838,#123848,.T.); +#123846 = VERTEX_POINT('',#123847); +#123847 = CARTESIAN_POINT('',(-2.4573,8.5,-1.737014889812)); +#123848 = LINE('',#123849,#123850); +#123849 = CARTESIAN_POINT('',(-2.4573,8.5,-1.737014889812)); +#123850 = VECTOR('',#123851,1.); +#123851 = DIRECTION('',(-1.,0.,0.)); +#123852 = ORIENTED_EDGE('',*,*,#123853,.F.); +#123853 = EDGE_CURVE('',#123854,#123846,#123856,.T.); +#123854 = VERTEX_POINT('',#123855); +#123855 = CARTESIAN_POINT('',(-2.4573,8.5,-1.928504255509)); +#123856 = LINE('',#123857,#123858); +#123857 = CARTESIAN_POINT('',(-2.4573,8.5,-1.928504255509)); +#123858 = VECTOR('',#123859,1.); +#123859 = DIRECTION('',(0.,0.,1.)); +#123860 = ORIENTED_EDGE('',*,*,#123861,.F.); +#123861 = EDGE_CURVE('',#123862,#123854,#123864,.T.); +#123862 = VERTEX_POINT('',#123863); +#123863 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.928504255509)); +#123864 = LINE('',#123865,#123866); +#123865 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.928504255509)); +#123866 = VECTOR('',#123867,1.); +#123867 = DIRECTION('',(1.,0.,0.)); +#123868 = ORIENTED_EDGE('',*,*,#123869,.F.); +#123869 = EDGE_CURVE('',#123870,#123862,#123872,.T.); +#123870 = VERTEX_POINT('',#123871); +#123871 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.915738299584)); +#123872 = LINE('',#123873,#123874); +#123873 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.915738299584)); +#123874 = VECTOR('',#123875,1.); +#123875 = DIRECTION('',(0.94664991777,0.,-0.322263763377)); +#123876 = ORIENTED_EDGE('',*,*,#123877,.F.); +#123877 = EDGE_CURVE('',#123878,#123870,#123880,.T.); +#123878 = VERTEX_POINT('',#123879); +#123879 = CARTESIAN_POINT('',(-2.7573,8.5,-1.890206378794)); +#123880 = LINE('',#123881,#123882); +#123881 = CARTESIAN_POINT('',(-2.7573,8.5,-1.890206378794)); +#123882 = VECTOR('',#123883,1.); +#123883 = DIRECTION('',(0.699624880427,0.,-0.714510340504)); +#123884 = ORIENTED_EDGE('',*,*,#123885,.F.); +#123885 = EDGE_CURVE('',#123886,#123878,#123888,.T.); +#123886 = VERTEX_POINT('',#123887); +#123887 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.851908511019)); +#123888 = LINE('',#123889,#123890); +#123889 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.851908511019)); +#123890 = VECTOR('',#123891,1.); +#123891 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#123892 = ORIENTED_EDGE('',*,*,#123893,.F.); +#123893 = EDGE_CURVE('',#123822,#123886,#123894,.T.); +#123894 = LINE('',#123895,#123896); +#123895 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.813610643244)); +#123896 = VECTOR('',#123897,1.); +#123897 = DIRECTION('',(0.,0.,-1.)); +#123898 = PLANE('',#123899); +#123899 = AXIS2_PLACEMENT_3D('',#123900,#123901,#123902); +#123900 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#123901 = DIRECTION('',(-0.,1.,0.)); +#123902 = DIRECTION('',(1.,0.,0.)); +#123903 = ADVANCED_FACE('',(#123904),#123920,.F.); +#123904 = FACE_BOUND('',#123905,.T.); +#123905 = EDGE_LOOP('',(#123906,#123912,#123913,#123919)); +#123906 = ORIENTED_EDGE('',*,*,#123907,.T.); +#123907 = EDGE_CURVE('',#122324,#122751,#123908,.T.); +#123908 = LINE('',#123909,#123910); +#123909 = CARTESIAN_POINT('',(-3.092329219213,8.9,-5.75)); +#123910 = VECTOR('',#123911,1.); +#123911 = DIRECTION('',(0.,-1.,0.)); +#123912 = ORIENTED_EDGE('',*,*,#122776,.F.); +#123913 = ORIENTED_EDGE('',*,*,#123914,.F.); +#123914 = EDGE_CURVE('',#122333,#122769,#123915,.T.); +#123915 = LINE('',#123916,#123917); +#123916 = CARTESIAN_POINT('',(-3.55,8.9,-5.75)); +#123917 = VECTOR('',#123918,1.); +#123918 = DIRECTION('',(0.,-1.,0.)); +#123919 = ORIENTED_EDGE('',*,*,#122332,.T.); +#123920 = PLANE('',#123921); +#123921 = AXIS2_PLACEMENT_3D('',#123922,#123923,#123924); +#123922 = CARTESIAN_POINT('',(-3.55,8.9,-5.75)); +#123923 = DIRECTION('',(0.,0.,1.)); +#123924 = DIRECTION('',(1.,0.,-0.)); +#123925 = ADVANCED_FACE('',(#123926),#123932,.F.); +#123926 = FACE_BOUND('',#123927,.T.); +#123927 = EDGE_LOOP('',(#123928,#123929,#123930,#123931)); +#123928 = ORIENTED_EDGE('',*,*,#123914,.T.); +#123929 = ORIENTED_EDGE('',*,*,#122768,.F.); +#123930 = ORIENTED_EDGE('',*,*,#121215,.F.); +#123931 = ORIENTED_EDGE('',*,*,#122340,.T.); +#123932 = PLANE('',#123933); +#123933 = AXIS2_PLACEMENT_3D('',#123934,#123935,#123936); +#123934 = CARTESIAN_POINT('',(-3.55,8.9,-8.3)); +#123935 = DIRECTION('',(-1.,0.,0.)); +#123936 = DIRECTION('',(0.,0.,1.)); +#123937 = ADVANCED_FACE('',(#123938),#123949,.T.); +#123938 = FACE_BOUND('',#123939,.T.); +#123939 = EDGE_LOOP('',(#123940,#123946,#123947,#123948)); +#123940 = ORIENTED_EDGE('',*,*,#123941,.T.); +#123941 = EDGE_CURVE('',#122316,#122753,#123942,.T.); +#123942 = LINE('',#123943,#123944); +#123943 = CARTESIAN_POINT('',(-1.,8.9,-7.842329219213)); +#123944 = VECTOR('',#123945,1.); +#123945 = DIRECTION('',(0.,-1.,0.)); +#123946 = ORIENTED_EDGE('',*,*,#122750,.F.); +#123947 = ORIENTED_EDGE('',*,*,#123907,.F.); +#123948 = ORIENTED_EDGE('',*,*,#122323,.F.); +#123949 = CYLINDRICAL_SURFACE('',#123950,3.25); +#123950 = AXIS2_PLACEMENT_3D('',#123951,#123952,#123953); +#123951 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#123952 = DIRECTION('',(0.,1.,0.)); +#123953 = DIRECTION('',(0.,0.,-1.)); +#123954 = ADVANCED_FACE('',(#123955),#123961,.F.); +#123955 = FACE_BOUND('',#123956,.T.); +#123956 = EDGE_LOOP('',(#123957,#123958,#123959,#123960)); +#123957 = ORIENTED_EDGE('',*,*,#121231,.T.); +#123958 = ORIENTED_EDGE('',*,*,#122761,.F.); +#123959 = ORIENTED_EDGE('',*,*,#123941,.F.); +#123960 = ORIENTED_EDGE('',*,*,#122315,.F.); +#123961 = PLANE('',#123962); +#123962 = AXIS2_PLACEMENT_3D('',#123963,#123964,#123965); +#123963 = CARTESIAN_POINT('',(-1.,8.9,-7.842329219213)); +#123964 = DIRECTION('',(1.,0.,0.)); +#123965 = DIRECTION('',(-0.,1.,0.)); +#123966 = ADVANCED_FACE('',(#123967),#123978,.F.); +#123967 = FACE_BOUND('',#123968,.T.); +#123968 = EDGE_LOOP('',(#123969,#123975,#123976,#123977)); +#123969 = ORIENTED_EDGE('',*,*,#123970,.T.); +#123970 = EDGE_CURVE('',#122300,#122791,#123971,.T.); +#123971 = LINE('',#123972,#123973); +#123972 = CARTESIAN_POINT('',(1.,8.9,-7.842329219213)); +#123973 = VECTOR('',#123974,1.); +#123974 = DIRECTION('',(0.,-1.,0.)); +#123975 = ORIENTED_EDGE('',*,*,#122816,.F.); +#123976 = ORIENTED_EDGE('',*,*,#121247,.F.); +#123977 = ORIENTED_EDGE('',*,*,#122308,.T.); +#123978 = PLANE('',#123979); +#123979 = AXIS2_PLACEMENT_3D('',#123980,#123981,#123982); +#123980 = CARTESIAN_POINT('',(1.,8.9,-8.3)); +#123981 = DIRECTION('',(-1.,0.,0.)); +#123982 = DIRECTION('',(0.,0.,1.)); +#123983 = ADVANCED_FACE('',(#123984),#123995,.T.); +#123984 = FACE_BOUND('',#123985,.T.); +#123985 = EDGE_LOOP('',(#123986,#123992,#123993,#123994)); +#123986 = ORIENTED_EDGE('',*,*,#123987,.T.); +#123987 = EDGE_CURVE('',#122292,#122793,#123988,.T.); +#123988 = LINE('',#123989,#123990); +#123989 = CARTESIAN_POINT('',(3.092329219213,8.9,-5.75)); +#123990 = VECTOR('',#123991,1.); +#123991 = DIRECTION('',(0.,-1.,0.)); +#123992 = ORIENTED_EDGE('',*,*,#122790,.F.); +#123993 = ORIENTED_EDGE('',*,*,#123970,.F.); +#123994 = ORIENTED_EDGE('',*,*,#122299,.F.); +#123995 = CYLINDRICAL_SURFACE('',#123996,3.25); +#123996 = AXIS2_PLACEMENT_3D('',#123997,#123998,#123999); +#123997 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#123998 = DIRECTION('',(0.,1.,0.)); +#123999 = DIRECTION('',(0.,0.,-1.)); +#124000 = ADVANCED_FACE('',(#124001),#124012,.F.); +#124001 = FACE_BOUND('',#124002,.T.); +#124002 = EDGE_LOOP('',(#124003,#124009,#124010,#124011)); +#124003 = ORIENTED_EDGE('',*,*,#124004,.T.); +#124004 = EDGE_CURVE('',#122284,#122802,#124005,.T.); +#124005 = LINE('',#124006,#124007); +#124006 = CARTESIAN_POINT('',(3.55,8.9,-5.75)); +#124007 = VECTOR('',#124008,1.); +#124008 = DIRECTION('',(0.,-1.,0.)); +#124009 = ORIENTED_EDGE('',*,*,#122801,.F.); +#124010 = ORIENTED_EDGE('',*,*,#123987,.F.); +#124011 = ORIENTED_EDGE('',*,*,#122291,.T.); +#124012 = PLANE('',#124013); +#124013 = AXIS2_PLACEMENT_3D('',#124014,#124015,#124016); +#124014 = CARTESIAN_POINT('',(3.092329219213,8.9,-5.75)); +#124015 = DIRECTION('',(0.,0.,1.)); +#124016 = DIRECTION('',(1.,0.,-0.)); +#124017 = ADVANCED_FACE('',(#124018),#124024,.F.); +#124018 = FACE_BOUND('',#124019,.T.); +#124019 = EDGE_LOOP('',(#124020,#124021,#124022,#124023)); +#124020 = ORIENTED_EDGE('',*,*,#121263,.T.); +#124021 = ORIENTED_EDGE('',*,*,#122809,.F.); +#124022 = ORIENTED_EDGE('',*,*,#124004,.F.); +#124023 = ORIENTED_EDGE('',*,*,#122283,.F.); +#124024 = PLANE('',#124025); +#124025 = AXIS2_PLACEMENT_3D('',#124026,#124027,#124028); +#124026 = CARTESIAN_POINT('',(3.55,8.9,-5.75)); +#124027 = DIRECTION('',(1.,0.,0.)); +#124028 = DIRECTION('',(-0.,1.,0.)); +#124029 = ADVANCED_FACE('',(#124030),#124046,.F.); +#124030 = FACE_BOUND('',#124031,.T.); +#124031 = EDGE_LOOP('',(#124032,#124038,#124039,#124045)); +#124032 = ORIENTED_EDGE('',*,*,#124033,.T.); +#124033 = EDGE_CURVE('',#122377,#122831,#124034,.T.); +#124034 = LINE('',#124035,#124036); +#124035 = CARTESIAN_POINT('',(3.092329219213,8.9,-3.75)); +#124036 = VECTOR('',#124037,1.); +#124037 = DIRECTION('',(0.,-1.,0.)); +#124038 = ORIENTED_EDGE('',*,*,#122865,.F.); +#124039 = ORIENTED_EDGE('',*,*,#124040,.F.); +#124040 = EDGE_CURVE('',#122353,#122858,#124041,.T.); +#124041 = LINE('',#124042,#124043); +#124042 = CARTESIAN_POINT('',(3.55,8.9,-3.75)); +#124043 = VECTOR('',#124044,1.); +#124044 = DIRECTION('',(0.,-1.,0.)); +#124045 = ORIENTED_EDGE('',*,*,#122385,.T.); +#124046 = PLANE('',#124047); +#124047 = AXIS2_PLACEMENT_3D('',#124048,#124049,#124050); +#124048 = CARTESIAN_POINT('',(3.55,8.9,-3.75)); +#124049 = DIRECTION('',(0.,0.,-1.)); +#124050 = DIRECTION('',(0.,-1.,0.)); +#124051 = ADVANCED_FACE('',(#124052),#124063,.F.); +#124052 = FACE_BOUND('',#124053,.T.); +#124053 = EDGE_LOOP('',(#124054,#124055,#124056,#124062)); +#124054 = ORIENTED_EDGE('',*,*,#124040,.T.); +#124055 = ORIENTED_EDGE('',*,*,#122857,.F.); +#124056 = ORIENTED_EDGE('',*,*,#124057,.F.); +#124057 = EDGE_CURVE('',#122351,#122850,#124058,.T.); +#124058 = LINE('',#124059,#124060); +#124059 = CARTESIAN_POINT('',(3.55,8.9,-1.2)); +#124060 = VECTOR('',#124061,1.); +#124061 = DIRECTION('',(0.,-1.,0.)); +#124062 = ORIENTED_EDGE('',*,*,#122350,.T.); +#124063 = PLANE('',#124064); +#124064 = AXIS2_PLACEMENT_3D('',#124065,#124066,#124067); +#124065 = CARTESIAN_POINT('',(3.55,8.9,-1.2)); +#124066 = DIRECTION('',(1.,0.,0.)); +#124067 = DIRECTION('',(-0.,1.,0.)); +#124068 = ADVANCED_FACE('',(#124069),#124080,.F.); +#124069 = FACE_BOUND('',#124070,.T.); +#124070 = EDGE_LOOP('',(#124071,#124072,#124073,#124079)); +#124071 = ORIENTED_EDGE('',*,*,#124057,.T.); +#124072 = ORIENTED_EDGE('',*,*,#122849,.F.); +#124073 = ORIENTED_EDGE('',*,*,#124074,.F.); +#124074 = EDGE_CURVE('',#122361,#122842,#124075,.T.); +#124075 = LINE('',#124076,#124077); +#124076 = CARTESIAN_POINT('',(1.,8.9,-1.2)); +#124077 = VECTOR('',#124078,1.); +#124078 = DIRECTION('',(0.,-1.,0.)); +#124079 = ORIENTED_EDGE('',*,*,#122360,.T.); +#124080 = PLANE('',#124081); +#124081 = AXIS2_PLACEMENT_3D('',#124082,#124083,#124084); +#124082 = CARTESIAN_POINT('',(1.,8.9,-1.2)); +#124083 = DIRECTION('',(0.,0.,1.)); +#124084 = DIRECTION('',(1.,0.,-0.)); +#124085 = ADVANCED_FACE('',(#124086),#124097,.F.); +#124086 = FACE_BOUND('',#124087,.T.); +#124087 = EDGE_LOOP('',(#124088,#124089,#124090,#124096)); +#124088 = ORIENTED_EDGE('',*,*,#124074,.T.); +#124089 = ORIENTED_EDGE('',*,*,#122841,.F.); +#124090 = ORIENTED_EDGE('',*,*,#124091,.F.); +#124091 = EDGE_CURVE('',#122369,#122833,#124092,.T.); +#124092 = LINE('',#124093,#124094); +#124093 = CARTESIAN_POINT('',(1.,8.9,-1.657670780787)); +#124094 = VECTOR('',#124095,1.); +#124095 = DIRECTION('',(0.,-1.,0.)); +#124096 = ORIENTED_EDGE('',*,*,#122368,.T.); +#124097 = PLANE('',#124098); +#124098 = AXIS2_PLACEMENT_3D('',#124099,#124100,#124101); +#124099 = CARTESIAN_POINT('',(1.,8.9,-1.657670780787)); +#124100 = DIRECTION('',(-1.,0.,0.)); +#124101 = DIRECTION('',(0.,0.,1.)); +#124102 = ADVANCED_FACE('',(#124103),#124109,.T.); +#124103 = FACE_BOUND('',#124104,.T.); +#124104 = EDGE_LOOP('',(#124105,#124106,#124107,#124108)); +#124105 = ORIENTED_EDGE('',*,*,#124091,.T.); +#124106 = ORIENTED_EDGE('',*,*,#122830,.F.); +#124107 = ORIENTED_EDGE('',*,*,#124033,.F.); +#124108 = ORIENTED_EDGE('',*,*,#122376,.F.); +#124109 = CYLINDRICAL_SURFACE('',#124110,3.25); +#124110 = AXIS2_PLACEMENT_3D('',#124111,#124112,#124113); +#124111 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#124112 = DIRECTION('',(0.,1.,0.)); +#124113 = DIRECTION('',(0.,0.,-1.)); +#124114 = ADVANCED_FACE('',(#124115),#124140,.T.); +#124115 = FACE_BOUND('',#124116,.T.); +#124116 = EDGE_LOOP('',(#124117,#124125,#124133,#124139)); +#124117 = ORIENTED_EDGE('',*,*,#124118,.T.); +#124118 = EDGE_CURVE('',#123180,#124119,#124121,.T.); +#124119 = VERTEX_POINT('',#124120); +#124120 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.699993621206)); +#124121 = LINE('',#124122,#124123); +#124122 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.699993621206)); +#124123 = VECTOR('',#124124,1.); +#124124 = DIRECTION('',(4.440892098501E-14,1.,2.220446049251E-14)); +#124125 = ORIENTED_EDGE('',*,*,#124126,.F.); +#124126 = EDGE_CURVE('',#124127,#124119,#124129,.T.); +#124127 = VERTEX_POINT('',#124128); +#124128 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.742121275759)); +#124129 = LINE('',#124130,#124131); +#124130 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.742121275759)); +#124131 = VECTOR('',#124132,1.); +#124132 = DIRECTION('',(0.699624835187,0.,0.714510384802)); +#124133 = ORIENTED_EDGE('',*,*,#124134,.F.); +#124134 = EDGE_CURVE('',#122876,#124127,#124135,.T.); +#124135 = LINE('',#124136,#124137); +#124136 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.742121275759)); +#124137 = VECTOR('',#124138,1.); +#124138 = DIRECTION('',(0.,1.,1.110223024625E-14)); +#124139 = ORIENTED_EDGE('',*,*,#123187,.T.); +#124140 = PLANE('',#124141); +#124141 = AXIS2_PLACEMENT_3D('',#124142,#124143,#124144); +#124142 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.742121275759)); +#124143 = DIRECTION('',(-0.714510384802,0.,0.699624835187)); +#124144 = DIRECTION('',(0.,1.,0.)); +#124145 = ADVANCED_FACE('',(#124146),#124164,.T.); +#124146 = FACE_BOUND('',#124147,.T.); +#124147 = EDGE_LOOP('',(#124148,#124149,#124157,#124163)); +#124148 = ORIENTED_EDGE('',*,*,#124134,.T.); +#124149 = ORIENTED_EDGE('',*,*,#124150,.F.); +#124150 = EDGE_CURVE('',#124151,#124127,#124153,.T.); +#124151 = VERTEX_POINT('',#124152); +#124152 = CARTESIAN_POINT('',(2.7319,8.52,-1.812334033346)); +#124153 = LINE('',#124154,#124155); +#124154 = CARTESIAN_POINT('',(2.7319,8.52,-1.812334033346)); +#124155 = VECTOR('',#124156,1.); +#124156 = DIRECTION('',(0.364692086679,0.,0.931128176952)); +#124157 = ORIENTED_EDGE('',*,*,#124158,.F.); +#124158 = EDGE_CURVE('',#122874,#124151,#124159,.T.); +#124159 = LINE('',#124160,#124161); +#124160 = CARTESIAN_POINT('',(2.7319,8.5,-1.812334033346)); +#124161 = VECTOR('',#124162,1.); +#124162 = DIRECTION('',(0.,1.,0.)); +#124163 = ORIENTED_EDGE('',*,*,#122873,.T.); +#124164 = PLANE('',#124165); +#124165 = AXIS2_PLACEMENT_3D('',#124166,#124167,#124168); +#124166 = CARTESIAN_POINT('',(2.7319,8.5,-1.812334033346)); +#124167 = DIRECTION('',(-0.931128176952,0.,0.364692086679)); +#124168 = DIRECTION('',(0.,1.,0.)); +#124169 = ADVANCED_FACE('',(#124170),#124188,.T.); +#124170 = FACE_BOUND('',#124171,.T.); +#124171 = EDGE_LOOP('',(#124172,#124173,#124181,#124187)); +#124172 = ORIENTED_EDGE('',*,*,#124158,.T.); +#124173 = ORIENTED_EDGE('',*,*,#124174,.F.); +#124174 = EDGE_CURVE('',#124175,#124151,#124177,.T.); +#124175 = VERTEX_POINT('',#124176); +#124176 = CARTESIAN_POINT('',(2.7319,8.52,-1.882546810603)); +#124177 = LINE('',#124178,#124179); +#124178 = CARTESIAN_POINT('',(2.7319,8.52,-1.882546810603)); +#124179 = VECTOR('',#124180,1.); +#124180 = DIRECTION('',(0.,0.,1.)); +#124181 = ORIENTED_EDGE('',*,*,#124182,.F.); +#124182 = EDGE_CURVE('',#122884,#124175,#124183,.T.); +#124183 = LINE('',#124184,#124185); +#124184 = CARTESIAN_POINT('',(2.7319,8.5,-1.882546810603)); +#124185 = VECTOR('',#124186,1.); +#124186 = DIRECTION('',(0.,1.,0.)); +#124187 = ORIENTED_EDGE('',*,*,#122883,.T.); +#124188 = PLANE('',#124189); +#124189 = AXIS2_PLACEMENT_3D('',#124190,#124191,#124192); +#124190 = CARTESIAN_POINT('',(2.7319,8.5,-1.882546810603)); +#124191 = DIRECTION('',(-1.,0.,0.)); +#124192 = DIRECTION('',(0.,0.,1.)); +#124193 = ADVANCED_FACE('',(#124194),#124212,.T.); +#124194 = FACE_BOUND('',#124195,.T.); +#124195 = EDGE_LOOP('',(#124196,#124197,#124205,#124211)); +#124196 = ORIENTED_EDGE('',*,*,#124182,.T.); +#124197 = ORIENTED_EDGE('',*,*,#124198,.F.); +#124198 = EDGE_CURVE('',#124199,#124175,#124201,.T.); +#124199 = VERTEX_POINT('',#124200); +#124200 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.952759578025)); +#124201 = LINE('',#124202,#124203); +#124202 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.952759578025)); +#124203 = VECTOR('',#124204,1.); +#124204 = DIRECTION('',(-0.364692042391,0.,0.931128194298)); +#124205 = ORIENTED_EDGE('',*,*,#124206,.F.); +#124206 = EDGE_CURVE('',#122892,#124199,#124207,.T.); +#124207 = LINE('',#124208,#124209); +#124208 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.952759578025)); +#124209 = VECTOR('',#124210,1.); +#124210 = DIRECTION('',(2.220446049251E-14,1.,-2.220446049251E-14)); +#124211 = ORIENTED_EDGE('',*,*,#122891,.T.); +#124212 = PLANE('',#124213); +#124213 = AXIS2_PLACEMENT_3D('',#124214,#124215,#124216); +#124214 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.952759578025)); +#124215 = DIRECTION('',(-0.931128194298,0.,-0.364692042391)); +#124216 = DIRECTION('',(-0.364692042391,0.,0.931128194298)); +#124217 = ADVANCED_FACE('',(#124218),#124236,.T.); +#124218 = FACE_BOUND('',#124219,.T.); +#124219 = EDGE_LOOP('',(#124220,#124221,#124229,#124235)); +#124220 = ORIENTED_EDGE('',*,*,#124206,.T.); +#124221 = ORIENTED_EDGE('',*,*,#124222,.F.); +#124222 = EDGE_CURVE('',#124223,#124199,#124225,.T.); +#124223 = VERTEX_POINT('',#124224); +#124224 = CARTESIAN_POINT('',(2.800650013113,8.52,-2.008929789013)); +#124225 = LINE('',#124226,#124227); +#124226 = CARTESIAN_POINT('',(2.800650013113,8.52,-2.008929789013)); +#124227 = VECTOR('',#124228,1.); +#124228 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#124229 = ORIENTED_EDGE('',*,*,#124230,.F.); +#124230 = EDGE_CURVE('',#122900,#124223,#124231,.T.); +#124231 = LINE('',#124232,#124233); +#124232 = CARTESIAN_POINT('',(2.800650013113,8.5,-2.008929789013)); +#124233 = VECTOR('',#124234,1.); +#124234 = DIRECTION('',(0.,1.,0.)); +#124235 = ORIENTED_EDGE('',*,*,#122899,.T.); +#124236 = PLANE('',#124237); +#124237 = AXIS2_PLACEMENT_3D('',#124238,#124239,#124240); +#124238 = CARTESIAN_POINT('',(2.800650013113,8.5,-2.008929789013)); +#124239 = DIRECTION('',(-0.806004420553,0.,-0.591909515086)); +#124240 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#124241 = ADVANCED_FACE('',(#124242),#124260,.T.); +#124242 = FACE_BOUND('',#124243,.T.); +#124243 = EDGE_LOOP('',(#124244,#124245,#124253,#124259)); +#124244 = ORIENTED_EDGE('',*,*,#124230,.T.); +#124245 = ORIENTED_EDGE('',*,*,#124246,.F.); +#124246 = EDGE_CURVE('',#124247,#124223,#124249,.T.); +#124247 = VERTEX_POINT('',#124248); +#124248 = CARTESIAN_POINT('',(2.869399986887,8.52,-2.051057447253)); +#124249 = LINE('',#124250,#124251); +#124250 = CARTESIAN_POINT('',(2.869399986887,8.52,-2.051057447253)); +#124251 = VECTOR('',#124252,1.); +#124252 = DIRECTION('',(-0.852653313443,0.,0.522477106747)); +#124253 = ORIENTED_EDGE('',*,*,#124254,.F.); +#124254 = EDGE_CURVE('',#122908,#124247,#124255,.T.); +#124255 = LINE('',#124256,#124257); +#124256 = CARTESIAN_POINT('',(2.869399986887,8.5,-2.051057447253)); +#124257 = VECTOR('',#124258,1.); +#124258 = DIRECTION('',(0.,1.,0.)); +#124259 = ORIENTED_EDGE('',*,*,#122907,.T.); +#124260 = PLANE('',#124261); +#124261 = AXIS2_PLACEMENT_3D('',#124262,#124263,#124264); +#124262 = CARTESIAN_POINT('',(2.869399986887,8.5,-2.051057447253)); +#124263 = DIRECTION('',(-0.522477106747,0.,-0.852653313443)); +#124264 = DIRECTION('',(-0.852653313443,0.,0.522477106747)); +#124265 = ADVANCED_FACE('',(#124266),#124284,.T.); +#124266 = FACE_BOUND('',#124267,.T.); +#124267 = EDGE_LOOP('',(#124268,#124269,#124277,#124283)); +#124268 = ORIENTED_EDGE('',*,*,#124254,.T.); +#124269 = ORIENTED_EDGE('',*,*,#124270,.F.); +#124270 = EDGE_CURVE('',#124271,#124247,#124273,.T.); +#124271 = VERTEX_POINT('',#124272); +#124272 = CARTESIAN_POINT('',(2.93815,8.52,-2.0651)); +#124273 = LINE('',#124274,#124275); +#124274 = CARTESIAN_POINT('',(2.93815,8.52,-2.0651)); +#124275 = VECTOR('',#124276,1.); +#124276 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#124277 = ORIENTED_EDGE('',*,*,#124278,.F.); +#124278 = EDGE_CURVE('',#122916,#124271,#124279,.T.); +#124279 = LINE('',#124280,#124281); +#124280 = CARTESIAN_POINT('',(2.93815,8.5,-2.0651)); +#124281 = VECTOR('',#124282,1.); +#124282 = DIRECTION('',(0.,1.,0.)); +#124283 = ORIENTED_EDGE('',*,*,#122915,.T.); +#124284 = PLANE('',#124285); +#124285 = AXIS2_PLACEMENT_3D('',#124286,#124287,#124288); +#124286 = CARTESIAN_POINT('',(2.93815,8.5,-2.0651)); +#124287 = DIRECTION('',(-0.200123335236,0.,-0.979770713327)); +#124288 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#124289 = ADVANCED_FACE('',(#124290),#124308,.T.); +#124290 = FACE_BOUND('',#124291,.T.); +#124291 = EDGE_LOOP('',(#124292,#124293,#124301,#124307)); +#124292 = ORIENTED_EDGE('',*,*,#124278,.T.); +#124293 = ORIENTED_EDGE('',*,*,#124294,.F.); +#124294 = EDGE_CURVE('',#124295,#124271,#124297,.T.); +#124295 = VERTEX_POINT('',#124296); +#124296 = CARTESIAN_POINT('',(3.006899993443,8.52,-2.0651)); +#124297 = LINE('',#124298,#124299); +#124298 = CARTESIAN_POINT('',(3.006899993443,8.52,-2.0651)); +#124299 = VECTOR('',#124300,1.); +#124300 = DIRECTION('',(-1.,0.,0.)); +#124301 = ORIENTED_EDGE('',*,*,#124302,.F.); +#124302 = EDGE_CURVE('',#122924,#124295,#124303,.T.); +#124303 = LINE('',#124304,#124305); +#124304 = CARTESIAN_POINT('',(3.006899993443,8.5,-2.0651)); +#124305 = VECTOR('',#124306,1.); +#124306 = DIRECTION('',(0.,1.,0.)); +#124307 = ORIENTED_EDGE('',*,*,#122923,.T.); +#124308 = PLANE('',#124309); +#124309 = AXIS2_PLACEMENT_3D('',#124310,#124311,#124312); +#124310 = CARTESIAN_POINT('',(3.006899993443,8.5,-2.0651)); +#124311 = DIRECTION('',(0.,0.,-1.)); +#124312 = DIRECTION('',(0.,-1.,0.)); +#124313 = ADVANCED_FACE('',(#124314),#124332,.T.); +#124314 = FACE_BOUND('',#124315,.T.); +#124315 = EDGE_LOOP('',(#124316,#124317,#124325,#124331)); +#124316 = ORIENTED_EDGE('',*,*,#124302,.T.); +#124317 = ORIENTED_EDGE('',*,*,#124318,.F.); +#124318 = EDGE_CURVE('',#124319,#124295,#124321,.T.); +#124319 = VERTEX_POINT('',#124320); +#124320 = CARTESIAN_POINT('',(3.075649996722,8.52,-2.051057447253)); +#124321 = LINE('',#124322,#124323); +#124322 = CARTESIAN_POINT('',(3.075649996722,8.52,-2.051057447253)); +#124323 = VECTOR('',#124324,1.); +#124324 = DIRECTION('',(-0.979770707714,0.,-0.200123362717)); +#124325 = ORIENTED_EDGE('',*,*,#124326,.F.); +#124326 = EDGE_CURVE('',#122932,#124319,#124327,.T.); +#124327 = LINE('',#124328,#124329); +#124328 = CARTESIAN_POINT('',(3.075649996722,8.5,-2.051057447253)); +#124329 = VECTOR('',#124330,1.); +#124330 = DIRECTION('',(0.,1.,0.)); +#124331 = ORIENTED_EDGE('',*,*,#122931,.T.); +#124332 = PLANE('',#124333); +#124333 = AXIS2_PLACEMENT_3D('',#124334,#124335,#124336); +#124334 = CARTESIAN_POINT('',(3.075649996722,8.5,-2.051057447253)); +#124335 = DIRECTION('',(0.200123362717,0.,-0.979770707714)); +#124336 = DIRECTION('',(0.,-1.,0.)); +#124337 = ADVANCED_FACE('',(#124338),#124356,.T.); +#124338 = FACE_BOUND('',#124339,.T.); +#124339 = EDGE_LOOP('',(#124340,#124341,#124349,#124355)); +#124340 = ORIENTED_EDGE('',*,*,#124326,.T.); +#124341 = ORIENTED_EDGE('',*,*,#124342,.F.); +#124342 = EDGE_CURVE('',#124343,#124319,#124345,.T.); +#124343 = VERTEX_POINT('',#124344); +#124344 = CARTESIAN_POINT('',(3.1444,8.52,-2.008929789013)); +#124345 = LINE('',#124346,#124347); +#124346 = CARTESIAN_POINT('',(3.1444,8.52,-2.008929789013)); +#124347 = VECTOR('',#124348,1.); +#124348 = DIRECTION('',(-0.852653413332,0.,-0.522476943733)); +#124349 = ORIENTED_EDGE('',*,*,#124350,.F.); +#124350 = EDGE_CURVE('',#122940,#124343,#124351,.T.); +#124351 = LINE('',#124352,#124353); +#124352 = CARTESIAN_POINT('',(3.1444,8.5,-2.008929789013)); +#124353 = VECTOR('',#124354,1.); +#124354 = DIRECTION('',(0.,1.,0.)); +#124355 = ORIENTED_EDGE('',*,*,#122939,.T.); +#124356 = PLANE('',#124357); +#124357 = AXIS2_PLACEMENT_3D('',#124358,#124359,#124360); +#124358 = CARTESIAN_POINT('',(3.1444,8.5,-2.008929789013)); +#124359 = DIRECTION('',(0.522476943733,0.,-0.852653413332)); +#124360 = DIRECTION('',(0.,-1.,0.)); +#124361 = ADVANCED_FACE('',(#124362),#124380,.T.); +#124362 = FACE_BOUND('',#124363,.T.); +#124363 = EDGE_LOOP('',(#124364,#124365,#124373,#124379)); +#124364 = ORIENTED_EDGE('',*,*,#124350,.T.); +#124365 = ORIENTED_EDGE('',*,*,#124366,.F.); +#124366 = EDGE_CURVE('',#124367,#124343,#124369,.T.); +#124367 = VERTEX_POINT('',#124368); +#124368 = CARTESIAN_POINT('',(3.18565,8.52,-1.952759578025)); +#124369 = LINE('',#124370,#124371); +#124370 = CARTESIAN_POINT('',(3.18565,8.52,-1.952759578025)); +#124371 = VECTOR('',#124372,1.); +#124372 = DIRECTION('',(-0.591909515086,0.,-0.806004420553)); +#124373 = ORIENTED_EDGE('',*,*,#124374,.F.); +#124374 = EDGE_CURVE('',#122948,#124367,#124375,.T.); +#124375 = LINE('',#124376,#124377); +#124376 = CARTESIAN_POINT('',(3.18565,8.5,-1.952759578025)); +#124377 = VECTOR('',#124378,1.); +#124378 = DIRECTION('',(0.,1.,0.)); +#124379 = ORIENTED_EDGE('',*,*,#122947,.T.); +#124380 = PLANE('',#124381); +#124381 = AXIS2_PLACEMENT_3D('',#124382,#124383,#124384); +#124382 = CARTESIAN_POINT('',(3.18565,8.5,-1.952759578025)); +#124383 = DIRECTION('',(0.806004420553,0.,-0.591909515086)); +#124384 = DIRECTION('',(0.,-1.,0.)); +#124385 = ADVANCED_FACE('',(#124386),#124404,.T.); +#124386 = FACE_BOUND('',#124387,.T.); +#124387 = EDGE_LOOP('',(#124388,#124389,#124397,#124403)); +#124388 = ORIENTED_EDGE('',*,*,#124374,.T.); +#124389 = ORIENTED_EDGE('',*,*,#124390,.F.); +#124390 = EDGE_CURVE('',#124391,#124367,#124393,.T.); +#124391 = VERTEX_POINT('',#124392); +#124392 = CARTESIAN_POINT('',(3.21314999959,8.52,-1.882546810603)); +#124393 = LINE('',#124394,#124395); +#124394 = CARTESIAN_POINT('',(3.21314999959,8.52,-1.882546810603)); +#124395 = VECTOR('',#124396,1.); +#124396 = DIRECTION('',(-0.364691886909,0.,-0.931128255195)); +#124397 = ORIENTED_EDGE('',*,*,#124398,.F.); +#124398 = EDGE_CURVE('',#122956,#124391,#124399,.T.); +#124399 = LINE('',#124400,#124401); +#124400 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.882546810603)); +#124401 = VECTOR('',#124402,1.); +#124402 = DIRECTION('',(0.,1.,0.)); +#124403 = ORIENTED_EDGE('',*,*,#122955,.T.); +#124404 = PLANE('',#124405); +#124405 = AXIS2_PLACEMENT_3D('',#124406,#124407,#124408); +#124406 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.882546810603)); +#124407 = DIRECTION('',(0.931128255195,0.,-0.364691886909)); +#124408 = DIRECTION('',(0.,-1.,0.)); +#124409 = ADVANCED_FACE('',(#124410),#124428,.T.); +#124410 = FACE_BOUND('',#124411,.T.); +#124411 = EDGE_LOOP('',(#124412,#124413,#124421,#124427)); +#124412 = ORIENTED_EDGE('',*,*,#124398,.T.); +#124413 = ORIENTED_EDGE('',*,*,#124414,.F.); +#124414 = EDGE_CURVE('',#124415,#124391,#124417,.T.); +#124415 = VERTEX_POINT('',#124416); +#124416 = CARTESIAN_POINT('',(3.2269,8.52,-1.784248930311)); +#124417 = LINE('',#124418,#124419); +#124418 = CARTESIAN_POINT('',(3.2269,8.52,-1.784248930311)); +#124419 = VECTOR('',#124420,1.); +#124420 = DIRECTION('',(-0.138532203308,0.,-0.990357929562)); +#124421 = ORIENTED_EDGE('',*,*,#124422,.F.); +#124422 = EDGE_CURVE('',#122964,#124415,#124423,.T.); +#124423 = LINE('',#124424,#124425); +#124424 = CARTESIAN_POINT('',(3.2269,8.5,-1.784248930311)); +#124425 = VECTOR('',#124426,1.); +#124426 = DIRECTION('',(0.,1.,-3.330669073876E-14)); +#124427 = ORIENTED_EDGE('',*,*,#122963,.T.); +#124428 = PLANE('',#124429); +#124429 = AXIS2_PLACEMENT_3D('',#124430,#124431,#124432); +#124430 = CARTESIAN_POINT('',(3.2269,8.5,-1.784248930311)); +#124431 = DIRECTION('',(0.990357929562,0.,-0.138532203308)); +#124432 = DIRECTION('',(0.,-1.,0.)); +#124433 = ADVANCED_FACE('',(#124434),#124452,.T.); +#124434 = FACE_BOUND('',#124435,.T.); +#124435 = EDGE_LOOP('',(#124436,#124437,#124445,#124451)); +#124436 = ORIENTED_EDGE('',*,*,#124422,.T.); +#124437 = ORIENTED_EDGE('',*,*,#124438,.F.); +#124438 = EDGE_CURVE('',#124439,#124415,#124441,.T.); +#124439 = VERTEX_POINT('',#124440); +#124440 = CARTESIAN_POINT('',(3.2269,8.52,-1.685951069689)); +#124441 = LINE('',#124442,#124443); +#124442 = CARTESIAN_POINT('',(3.2269,8.52,-1.685951069689)); +#124443 = VECTOR('',#124444,1.); +#124444 = DIRECTION('',(0.,0.,-1.)); +#124445 = ORIENTED_EDGE('',*,*,#124446,.F.); +#124446 = EDGE_CURVE('',#122972,#124439,#124447,.T.); +#124447 = LINE('',#124448,#124449); +#124448 = CARTESIAN_POINT('',(3.2269,8.5,-1.685951069689)); +#124449 = VECTOR('',#124450,1.); +#124450 = DIRECTION('',(0.,1.,0.)); +#124451 = ORIENTED_EDGE('',*,*,#122971,.T.); +#124452 = PLANE('',#124453); +#124453 = AXIS2_PLACEMENT_3D('',#124454,#124455,#124456); +#124454 = CARTESIAN_POINT('',(3.2269,8.5,-1.685951069689)); +#124455 = DIRECTION('',(1.,0.,0.)); +#124456 = DIRECTION('',(-0.,1.,0.)); +#124457 = ADVANCED_FACE('',(#124458),#124476,.T.); +#124458 = FACE_BOUND('',#124459,.T.); +#124459 = EDGE_LOOP('',(#124460,#124461,#124469,#124475)); +#124460 = ORIENTED_EDGE('',*,*,#124446,.T.); +#124461 = ORIENTED_EDGE('',*,*,#124462,.F.); +#124462 = EDGE_CURVE('',#124463,#124439,#124465,.T.); +#124463 = VERTEX_POINT('',#124464); +#124464 = CARTESIAN_POINT('',(3.21314999959,8.52,-1.587653209066)); +#124465 = LINE('',#124466,#124467); +#124466 = CARTESIAN_POINT('',(3.21314999959,8.52,-1.587653209066)); +#124467 = VECTOR('',#124468,1.); +#124468 = DIRECTION('',(0.138532230496,0.,-0.990357925759)); +#124469 = ORIENTED_EDGE('',*,*,#124470,.F.); +#124470 = EDGE_CURVE('',#122980,#124463,#124471,.T.); +#124471 = LINE('',#124472,#124473); +#124472 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.587653209066)); +#124473 = VECTOR('',#124474,1.); +#124474 = DIRECTION('',(0.,1.,2.220446049251E-14)); +#124475 = ORIENTED_EDGE('',*,*,#122979,.T.); +#124476 = PLANE('',#124477); +#124477 = AXIS2_PLACEMENT_3D('',#124478,#124479,#124480); +#124478 = CARTESIAN_POINT('',(3.21314999959,8.5,-1.587653209066)); +#124479 = DIRECTION('',(0.990357925759,0.,0.138532230496)); +#124480 = DIRECTION('',(0.,-1.,0.)); +#124481 = ADVANCED_FACE('',(#124482),#124500,.T.); +#124482 = FACE_BOUND('',#124483,.T.); +#124483 = EDGE_LOOP('',(#124484,#124485,#124493,#124499)); +#124484 = ORIENTED_EDGE('',*,*,#124470,.T.); +#124485 = ORIENTED_EDGE('',*,*,#124486,.F.); +#124486 = EDGE_CURVE('',#124487,#124463,#124489,.T.); +#124487 = VERTEX_POINT('',#124488); +#124488 = CARTESIAN_POINT('',(3.18565,8.52,-1.51744041214)); +#124489 = LINE('',#124490,#124491); +#124490 = CARTESIAN_POINT('',(3.18565,8.52,-1.51744041214)); +#124491 = VECTOR('',#124492,1.); +#124492 = DIRECTION('',(0.364691754043,0.,-0.931128307234)); +#124493 = ORIENTED_EDGE('',*,*,#124494,.F.); +#124494 = EDGE_CURVE('',#122988,#124487,#124495,.T.); +#124495 = LINE('',#124496,#124497); +#124496 = CARTESIAN_POINT('',(3.18565,8.5,-1.51744041214)); +#124497 = VECTOR('',#124498,1.); +#124498 = DIRECTION('',(0.,1.,-2.220446049251E-14)); +#124499 = ORIENTED_EDGE('',*,*,#122987,.T.); +#124500 = PLANE('',#124501); +#124501 = AXIS2_PLACEMENT_3D('',#124502,#124503,#124504); +#124502 = CARTESIAN_POINT('',(3.18565,8.5,-1.51744041214)); +#124503 = DIRECTION('',(0.931128307234,0.,0.364691754043)); +#124504 = DIRECTION('',(0.,-1.,0.)); +#124505 = ADVANCED_FACE('',(#124506),#124524,.T.); +#124506 = FACE_BOUND('',#124507,.T.); +#124507 = EDGE_LOOP('',(#124508,#124509,#124517,#124523)); +#124508 = ORIENTED_EDGE('',*,*,#124494,.T.); +#124509 = ORIENTED_EDGE('',*,*,#124510,.F.); +#124510 = EDGE_CURVE('',#124511,#124487,#124513,.T.); +#124511 = VERTEX_POINT('',#124512); +#124512 = CARTESIAN_POINT('',(3.1444,8.52,-1.46127020607)); +#124513 = LINE('',#124514,#124515); +#124514 = CARTESIAN_POINT('',(3.1444,8.52,-1.46127020607)); +#124515 = VECTOR('',#124516,1.); +#124516 = DIRECTION('',(0.59190954875,0.,-0.806004395831)); +#124517 = ORIENTED_EDGE('',*,*,#124518,.F.); +#124518 = EDGE_CURVE('',#122996,#124511,#124519,.T.); +#124519 = LINE('',#124520,#124521); +#124520 = CARTESIAN_POINT('',(3.1444,8.5,-1.46127020607)); +#124521 = VECTOR('',#124522,1.); +#124522 = DIRECTION('',(0.,1.,0.)); +#124523 = ORIENTED_EDGE('',*,*,#122995,.T.); +#124524 = PLANE('',#124525); +#124525 = AXIS2_PLACEMENT_3D('',#124526,#124527,#124528); +#124526 = CARTESIAN_POINT('',(3.1444,8.5,-1.46127020607)); +#124527 = DIRECTION('',(0.806004395831,0.,0.59190954875)); +#124528 = DIRECTION('',(0.,-1.,0.)); +#124529 = ADVANCED_FACE('',(#124530),#124548,.T.); +#124530 = FACE_BOUND('',#124531,.T.); +#124531 = EDGE_LOOP('',(#124532,#124533,#124541,#124547)); +#124532 = ORIENTED_EDGE('',*,*,#124518,.T.); +#124533 = ORIENTED_EDGE('',*,*,#124534,.F.); +#124534 = EDGE_CURVE('',#124535,#124511,#124537,.T.); +#124535 = VERTEX_POINT('',#124536); +#124536 = CARTESIAN_POINT('',(3.075649996722,8.52,-1.419142551517)); +#124537 = LINE('',#124538,#124539); +#124538 = CARTESIAN_POINT('',(3.075649996722,8.52,-1.419142551517)); +#124539 = VECTOR('',#124540,1.); +#124540 = DIRECTION('',(0.852653433709,0.,-0.522476910479)); +#124541 = ORIENTED_EDGE('',*,*,#124542,.F.); +#124542 = EDGE_CURVE('',#123004,#124535,#124543,.T.); +#124543 = LINE('',#124544,#124545); +#124544 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.419142551517)); +#124545 = VECTOR('',#124546,1.); +#124546 = DIRECTION('',(0.,1.,0.)); +#124547 = ORIENTED_EDGE('',*,*,#123003,.T.); +#124548 = PLANE('',#124549); +#124549 = AXIS2_PLACEMENT_3D('',#124550,#124551,#124552); +#124550 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.419142551517)); +#124551 = DIRECTION('',(0.522476910479,0.,0.852653433709)); +#124552 = DIRECTION('',(0.,-1.,0.)); +#124553 = ADVANCED_FACE('',(#124554),#124572,.T.); +#124554 = FACE_BOUND('',#124555,.T.); +#124555 = EDGE_LOOP('',(#124556,#124557,#124565,#124571)); +#124556 = ORIENTED_EDGE('',*,*,#124542,.T.); +#124557 = ORIENTED_EDGE('',*,*,#124558,.F.); +#124558 = EDGE_CURVE('',#124559,#124535,#124561,.T.); +#124559 = VERTEX_POINT('',#124560); +#124560 = CARTESIAN_POINT('',(3.006899993443,8.52,-1.4051)); +#124561 = LINE('',#124562,#124563); +#124562 = CARTESIAN_POINT('',(3.006899993443,8.52,-1.4051)); +#124563 = VECTOR('',#124564,1.); +#124564 = DIRECTION('',(0.979770711149,0.,-0.200123345899)); +#124565 = ORIENTED_EDGE('',*,*,#124566,.F.); +#124566 = EDGE_CURVE('',#123012,#124559,#124567,.T.); +#124567 = LINE('',#124568,#124569); +#124568 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.4051)); +#124569 = VECTOR('',#124570,1.); +#124570 = DIRECTION('',(0.,1.,0.)); +#124571 = ORIENTED_EDGE('',*,*,#123011,.T.); +#124572 = PLANE('',#124573); +#124573 = AXIS2_PLACEMENT_3D('',#124574,#124575,#124576); +#124574 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.4051)); +#124575 = DIRECTION('',(0.200123345899,0.,0.979770711149)); +#124576 = DIRECTION('',(0.,-1.,0.)); +#124577 = ADVANCED_FACE('',(#124578),#124596,.T.); +#124578 = FACE_BOUND('',#124579,.T.); +#124579 = EDGE_LOOP('',(#124580,#124581,#124589,#124595)); +#124580 = ORIENTED_EDGE('',*,*,#124566,.T.); +#124581 = ORIENTED_EDGE('',*,*,#124582,.F.); +#124582 = EDGE_CURVE('',#124583,#124559,#124585,.T.); +#124583 = VERTEX_POINT('',#124584); +#124584 = CARTESIAN_POINT('',(2.951900006557,8.52,-1.4051)); +#124585 = LINE('',#124586,#124587); +#124586 = CARTESIAN_POINT('',(2.951900006557,8.52,-1.4051)); +#124587 = VECTOR('',#124588,1.); +#124588 = DIRECTION('',(1.,0.,0.)); +#124589 = ORIENTED_EDGE('',*,*,#124590,.F.); +#124590 = EDGE_CURVE('',#123020,#124583,#124591,.T.); +#124591 = LINE('',#124592,#124593); +#124592 = CARTESIAN_POINT('',(2.951900006557,8.5,-1.4051)); +#124593 = VECTOR('',#124594,1.); +#124594 = DIRECTION('',(0.,1.,0.)); +#124595 = ORIENTED_EDGE('',*,*,#123019,.T.); +#124596 = PLANE('',#124597); +#124597 = AXIS2_PLACEMENT_3D('',#124598,#124599,#124600); +#124598 = CARTESIAN_POINT('',(2.951900006557,8.5,-1.4051)); +#124599 = DIRECTION('',(0.,0.,1.)); +#124600 = DIRECTION('',(1.,0.,-0.)); +#124601 = ADVANCED_FACE('',(#124602),#124620,.T.); +#124602 = FACE_BOUND('',#124603,.T.); +#124603 = EDGE_LOOP('',(#124604,#124605,#124613,#124619)); +#124604 = ORIENTED_EDGE('',*,*,#124590,.T.); +#124605 = ORIENTED_EDGE('',*,*,#124606,.F.); +#124606 = EDGE_CURVE('',#124607,#124583,#124609,.T.); +#124607 = VERTEX_POINT('',#124608); +#124608 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.419142551517)); +#124609 = LINE('',#124610,#124611); +#124610 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.419142551517)); +#124611 = VECTOR('',#124612,1.); +#124612 = DIRECTION('',(0.979770705536,0.,0.200123373381)); +#124613 = ORIENTED_EDGE('',*,*,#124614,.F.); +#124614 = EDGE_CURVE('',#123028,#124607,#124615,.T.); +#124615 = LINE('',#124616,#124617); +#124616 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.419142551517)); +#124617 = VECTOR('',#124618,1.); +#124618 = DIRECTION('',(0.,1.,0.)); +#124619 = ORIENTED_EDGE('',*,*,#123027,.T.); +#124620 = PLANE('',#124621); +#124621 = AXIS2_PLACEMENT_3D('',#124622,#124623,#124624); +#124622 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.419142551517)); +#124623 = DIRECTION('',(-0.200123373381,0.,0.979770705536)); +#124624 = DIRECTION('',(0.,1.,0.)); +#124625 = ADVANCED_FACE('',(#124626),#124644,.T.); +#124626 = FACE_BOUND('',#124627,.T.); +#124627 = EDGE_LOOP('',(#124628,#124629,#124637,#124643)); +#124628 = ORIENTED_EDGE('',*,*,#124614,.T.); +#124629 = ORIENTED_EDGE('',*,*,#124630,.F.); +#124630 = EDGE_CURVE('',#124631,#124607,#124633,.T.); +#124631 = VERTEX_POINT('',#124632); +#124632 = CARTESIAN_POINT('',(2.8144,8.52,-1.46127020607)); +#124633 = LINE('',#124634,#124635); +#124634 = CARTESIAN_POINT('',(2.8144,8.52,-1.46127020607)); +#124635 = VECTOR('',#124636,1.); +#124636 = DIRECTION('',(0.852653467006,0.,0.522476856141)); +#124637 = ORIENTED_EDGE('',*,*,#124638,.F.); +#124638 = EDGE_CURVE('',#123036,#124631,#124639,.T.); +#124639 = LINE('',#124640,#124641); +#124640 = CARTESIAN_POINT('',(2.8144,8.5,-1.46127020607)); +#124641 = VECTOR('',#124642,1.); +#124642 = DIRECTION('',(0.,1.,1.110223024625E-14)); +#124643 = ORIENTED_EDGE('',*,*,#123035,.T.); +#124644 = PLANE('',#124645); +#124645 = AXIS2_PLACEMENT_3D('',#124646,#124647,#124648); +#124646 = CARTESIAN_POINT('',(2.8144,8.5,-1.46127020607)); +#124647 = DIRECTION('',(-0.522476856141,0.,0.852653467006)); +#124648 = DIRECTION('',(0.,1.,0.)); +#124649 = ADVANCED_FACE('',(#124650),#124668,.T.); +#124650 = FACE_BOUND('',#124651,.T.); +#124651 = EDGE_LOOP('',(#124652,#124653,#124661,#124667)); +#124652 = ORIENTED_EDGE('',*,*,#124638,.T.); +#124653 = ORIENTED_EDGE('',*,*,#124654,.F.); +#124654 = EDGE_CURVE('',#124655,#124631,#124657,.T.); +#124655 = VERTEX_POINT('',#124656); +#124656 = CARTESIAN_POINT('',(2.77315,8.52,-1.51744041214)); +#124657 = LINE('',#124658,#124659); +#124658 = CARTESIAN_POINT('',(2.77315,8.52,-1.51744041214)); +#124659 = VECTOR('',#124660,1.); +#124660 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#124661 = ORIENTED_EDGE('',*,*,#124662,.F.); +#124662 = EDGE_CURVE('',#123044,#124655,#124663,.T.); +#124663 = LINE('',#124664,#124665); +#124664 = CARTESIAN_POINT('',(2.77315,8.5,-1.51744041214)); +#124665 = VECTOR('',#124666,1.); +#124666 = DIRECTION('',(0.,1.,0.)); +#124667 = ORIENTED_EDGE('',*,*,#123043,.T.); +#124668 = PLANE('',#124669); +#124669 = AXIS2_PLACEMENT_3D('',#124670,#124671,#124672); +#124670 = CARTESIAN_POINT('',(2.77315,8.5,-1.51744041214)); +#124671 = DIRECTION('',(-0.806004395831,0.,0.59190954875)); +#124672 = DIRECTION('',(0.,1.,0.)); +#124673 = ADVANCED_FACE('',(#124674),#124692,.T.); +#124674 = FACE_BOUND('',#124675,.T.); +#124675 = EDGE_LOOP('',(#124676,#124677,#124685,#124691)); +#124676 = ORIENTED_EDGE('',*,*,#124662,.T.); +#124677 = ORIENTED_EDGE('',*,*,#124678,.F.); +#124678 = EDGE_CURVE('',#124679,#124655,#124681,.T.); +#124679 = VERTEX_POINT('',#124680); +#124680 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.559568066692)); +#124681 = LINE('',#124682,#124683); +#124682 = CARTESIAN_POINT('',(2.759400013113,8.52,-1.559568066692)); +#124683 = VECTOR('',#124684,1.); +#124684 = DIRECTION('',(0.310279797551,0.,0.950645279393)); +#124685 = ORIENTED_EDGE('',*,*,#124686,.F.); +#124686 = EDGE_CURVE('',#123052,#124679,#124687,.T.); +#124687 = LINE('',#124688,#124689); +#124688 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.559568066692)); +#124689 = VECTOR('',#124690,1.); +#124690 = DIRECTION('',(0.,1.,2.220446049251E-14)); +#124691 = ORIENTED_EDGE('',*,*,#123051,.T.); +#124692 = PLANE('',#124693); +#124693 = AXIS2_PLACEMENT_3D('',#124694,#124695,#124696); +#124694 = CARTESIAN_POINT('',(2.759400013113,8.5,-1.559568066692)); +#124695 = DIRECTION('',(-0.950645279393,0.,0.310279797551)); +#124696 = DIRECTION('',(0.,1.,0.)); +#124697 = ADVANCED_FACE('',(#124698),#124716,.T.); +#124698 = FACE_BOUND('',#124699,.T.); +#124699 = EDGE_LOOP('',(#124700,#124701,#124709,#124715)); +#124700 = ORIENTED_EDGE('',*,*,#124686,.T.); +#124701 = ORIENTED_EDGE('',*,*,#124702,.F.); +#124702 = EDGE_CURVE('',#124703,#124679,#124705,.T.); +#124703 = VERTEX_POINT('',#124704); +#124704 = CARTESIAN_POINT('',(2.828149986887,8.52,-1.559568066692)); +#124705 = LINE('',#124706,#124707); +#124706 = CARTESIAN_POINT('',(2.828149986887,8.52,-1.559568066692)); +#124707 = VECTOR('',#124708,1.); +#124708 = DIRECTION('',(-1.,0.,0.)); +#124709 = ORIENTED_EDGE('',*,*,#124710,.F.); +#124710 = EDGE_CURVE('',#123060,#124703,#124711,.T.); +#124711 = LINE('',#124712,#124713); +#124712 = CARTESIAN_POINT('',(2.828149986887,8.5,-1.559568066692)); +#124713 = VECTOR('',#124714,1.); +#124714 = DIRECTION('',(0.,1.,2.220446049251E-14)); +#124715 = ORIENTED_EDGE('',*,*,#123059,.T.); +#124716 = PLANE('',#124717); +#124717 = AXIS2_PLACEMENT_3D('',#124718,#124719,#124720); +#124718 = CARTESIAN_POINT('',(2.828149986887,8.5,-1.559568066692)); +#124719 = DIRECTION('',(0.,0.,-1.)); +#124720 = DIRECTION('',(0.,-1.,0.)); +#124721 = ADVANCED_FACE('',(#124722),#124740,.T.); +#124722 = FACE_BOUND('',#124723,.T.); +#124723 = EDGE_LOOP('',(#124724,#124725,#124733,#124739)); +#124724 = ORIENTED_EDGE('',*,*,#124710,.T.); +#124725 = ORIENTED_EDGE('',*,*,#124726,.F.); +#124726 = EDGE_CURVE('',#124727,#124703,#124729,.T.); +#124727 = VERTEX_POINT('',#124728); +#124728 = CARTESIAN_POINT('',(2.85565,8.52,-1.51744041214)); +#124729 = LINE('',#124730,#124731); +#124730 = CARTESIAN_POINT('',(2.85565,8.52,-1.51744041214)); +#124731 = VECTOR('',#124732,1.); +#124732 = DIRECTION('',(-0.546622729396,0.,-0.837379001234)); +#124733 = ORIENTED_EDGE('',*,*,#124734,.F.); +#124734 = EDGE_CURVE('',#123068,#124727,#124735,.T.); +#124735 = LINE('',#124736,#124737); +#124736 = CARTESIAN_POINT('',(2.85565,8.5,-1.51744041214)); +#124737 = VECTOR('',#124738,1.); +#124738 = DIRECTION('',(0.,1.,0.)); +#124739 = ORIENTED_EDGE('',*,*,#123067,.T.); +#124740 = PLANE('',#124741); +#124741 = AXIS2_PLACEMENT_3D('',#124742,#124743,#124744); +#124742 = CARTESIAN_POINT('',(2.85565,8.5,-1.51744041214)); +#124743 = DIRECTION('',(0.837379001234,0.,-0.546622729396)); +#124744 = DIRECTION('',(0.,-1.,0.)); +#124745 = ADVANCED_FACE('',(#124746),#124764,.T.); +#124746 = FACE_BOUND('',#124747,.T.); +#124747 = EDGE_LOOP('',(#124748,#124749,#124757,#124763)); +#124748 = ORIENTED_EDGE('',*,*,#124734,.T.); +#124749 = ORIENTED_EDGE('',*,*,#124750,.F.); +#124750 = EDGE_CURVE('',#124751,#124727,#124753,.T.); +#124751 = VERTEX_POINT('',#124752); +#124752 = CARTESIAN_POINT('',(2.8969,8.52,-1.489355309105)); +#124753 = LINE('',#124754,#124755); +#124754 = CARTESIAN_POINT('',(2.8969,8.52,-1.489355309105)); +#124755 = VECTOR('',#124756,1.); +#124756 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#124757 = ORIENTED_EDGE('',*,*,#124758,.F.); +#124758 = EDGE_CURVE('',#123076,#124751,#124759,.T.); +#124759 = LINE('',#124760,#124761); +#124760 = CARTESIAN_POINT('',(2.8969,8.5,-1.489355309105)); +#124761 = VECTOR('',#124762,1.); +#124762 = DIRECTION('',(0.,1.,0.)); +#124763 = ORIENTED_EDGE('',*,*,#123075,.T.); +#124764 = PLANE('',#124765); +#124765 = AXIS2_PLACEMENT_3D('',#124766,#124767,#124768); +#124766 = CARTESIAN_POINT('',(2.8969,8.5,-1.489355309105)); +#124767 = DIRECTION('',(0.562790931242,0.,-0.8265992788)); +#124768 = DIRECTION('',(0.,-1.,0.)); +#124769 = ADVANCED_FACE('',(#124770),#124788,.T.); +#124770 = FACE_BOUND('',#124771,.T.); +#124771 = EDGE_LOOP('',(#124772,#124773,#124781,#124787)); +#124772 = ORIENTED_EDGE('',*,*,#124758,.T.); +#124773 = ORIENTED_EDGE('',*,*,#124774,.F.); +#124774 = EDGE_CURVE('',#124775,#124751,#124777,.T.); +#124775 = VERTEX_POINT('',#124776); +#124776 = CARTESIAN_POINT('',(2.93815,8.52,-1.475312757587)); +#124777 = LINE('',#124778,#124779); +#124778 = CARTESIAN_POINT('',(2.93815,8.52,-1.475312757587)); +#124779 = VECTOR('',#124780,1.); +#124780 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#124781 = ORIENTED_EDGE('',*,*,#124782,.F.); +#124782 = EDGE_CURVE('',#123084,#124775,#124783,.T.); +#124783 = LINE('',#124784,#124785); +#124784 = CARTESIAN_POINT('',(2.93815,8.5,-1.475312757587)); +#124785 = VECTOR('',#124786,1.); +#124786 = DIRECTION('',(0.,1.,0.)); +#124787 = ORIENTED_EDGE('',*,*,#123083,.T.); +#124788 = PLANE('',#124789); +#124789 = AXIS2_PLACEMENT_3D('',#124790,#124791,#124792); +#124790 = CARTESIAN_POINT('',(2.93815,8.5,-1.475312757587)); +#124791 = DIRECTION('',(0.322263763377,0.,-0.94664991777)); +#124792 = DIRECTION('',(0.,-1.,0.)); +#124793 = ADVANCED_FACE('',(#124794),#124812,.T.); +#124794 = FACE_BOUND('',#124795,.T.); +#124795 = EDGE_LOOP('',(#124796,#124797,#124805,#124811)); +#124796 = ORIENTED_EDGE('',*,*,#124782,.T.); +#124797 = ORIENTED_EDGE('',*,*,#124798,.F.); +#124798 = EDGE_CURVE('',#124799,#124775,#124801,.T.); +#124799 = VERTEX_POINT('',#124800); +#124800 = CARTESIAN_POINT('',(3.02065,8.52,-1.475312757587)); +#124801 = LINE('',#124802,#124803); +#124802 = CARTESIAN_POINT('',(3.02065,8.52,-1.475312757587)); +#124803 = VECTOR('',#124804,1.); +#124804 = DIRECTION('',(-1.,0.,0.)); +#124805 = ORIENTED_EDGE('',*,*,#124806,.F.); +#124806 = EDGE_CURVE('',#123092,#124799,#124807,.T.); +#124807 = LINE('',#124808,#124809); +#124808 = CARTESIAN_POINT('',(3.02065,8.5,-1.475312757587)); +#124809 = VECTOR('',#124810,1.); +#124810 = DIRECTION('',(0.,1.,0.)); +#124811 = ORIENTED_EDGE('',*,*,#123091,.T.); +#124812 = PLANE('',#124813); +#124813 = AXIS2_PLACEMENT_3D('',#124814,#124815,#124816); +#124814 = CARTESIAN_POINT('',(3.02065,8.5,-1.475312757587)); +#124815 = DIRECTION('',(0.,0.,-1.)); +#124816 = DIRECTION('',(0.,-1.,0.)); +#124817 = ADVANCED_FACE('',(#124818),#124836,.T.); +#124818 = FACE_BOUND('',#124819,.T.); +#124819 = EDGE_LOOP('',(#124820,#124821,#124829,#124835)); +#124820 = ORIENTED_EDGE('',*,*,#124806,.T.); +#124821 = ORIENTED_EDGE('',*,*,#124822,.F.); +#124822 = EDGE_CURVE('',#124823,#124799,#124825,.T.); +#124823 = VERTEX_POINT('',#124824); +#124824 = CARTESIAN_POINT('',(3.0619,8.52,-1.489355309105)); +#124825 = LINE('',#124826,#124827); +#124826 = CARTESIAN_POINT('',(3.0619,8.52,-1.489355309105)); +#124827 = VECTOR('',#124828,1.); +#124828 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#124829 = ORIENTED_EDGE('',*,*,#124830,.F.); +#124830 = EDGE_CURVE('',#123100,#124823,#124831,.T.); +#124831 = LINE('',#124832,#124833); +#124832 = CARTESIAN_POINT('',(3.0619,8.5,-1.489355309105)); +#124833 = VECTOR('',#124834,1.); +#124834 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#124835 = ORIENTED_EDGE('',*,*,#123099,.T.); +#124836 = PLANE('',#124837); +#124837 = AXIS2_PLACEMENT_3D('',#124838,#124839,#124840); +#124838 = CARTESIAN_POINT('',(3.0619,8.5,-1.489355309105)); +#124839 = DIRECTION('',(-0.322263763377,0.,-0.94664991777)); +#124840 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#124841 = ADVANCED_FACE('',(#124842),#124860,.T.); +#124842 = FACE_BOUND('',#124843,.T.); +#124843 = EDGE_LOOP('',(#124844,#124845,#124853,#124859)); +#124844 = ORIENTED_EDGE('',*,*,#124830,.T.); +#124845 = ORIENTED_EDGE('',*,*,#124846,.F.); +#124846 = EDGE_CURVE('',#124847,#124823,#124849,.T.); +#124847 = VERTEX_POINT('',#124848); +#124848 = CARTESIAN_POINT('',(3.10315,8.52,-1.51744041214)); +#124849 = LINE('',#124850,#124851); +#124850 = CARTESIAN_POINT('',(3.10315,8.52,-1.51744041214)); +#124851 = VECTOR('',#124852,1.); +#124852 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#124853 = ORIENTED_EDGE('',*,*,#124854,.F.); +#124854 = EDGE_CURVE('',#123108,#124847,#124855,.T.); +#124855 = LINE('',#124856,#124857); +#124856 = CARTESIAN_POINT('',(3.10315,8.5,-1.51744041214)); +#124857 = VECTOR('',#124858,1.); +#124858 = DIRECTION('',(0.,1.,0.)); +#124859 = ORIENTED_EDGE('',*,*,#123107,.T.); +#124860 = PLANE('',#124861); +#124861 = AXIS2_PLACEMENT_3D('',#124862,#124863,#124864); +#124862 = CARTESIAN_POINT('',(3.10315,8.5,-1.51744041214)); +#124863 = DIRECTION('',(-0.562790931242,0.,-0.8265992788)); +#124864 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#124865 = ADVANCED_FACE('',(#124866),#124884,.T.); +#124866 = FACE_BOUND('',#124867,.T.); +#124867 = EDGE_LOOP('',(#124868,#124869,#124877,#124883)); +#124868 = ORIENTED_EDGE('',*,*,#124854,.T.); +#124869 = ORIENTED_EDGE('',*,*,#124870,.F.); +#124870 = EDGE_CURVE('',#124871,#124847,#124873,.T.); +#124871 = VERTEX_POINT('',#124872); +#124872 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.559568066692)); +#124873 = LINE('',#124874,#124875); +#124874 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.559568066692)); +#124875 = VECTOR('',#124876,1.); +#124876 = DIRECTION('',(-0.546622592319,0.,0.837379090715)); +#124877 = ORIENTED_EDGE('',*,*,#124878,.F.); +#124878 = EDGE_CURVE('',#123116,#124871,#124879,.T.); +#124879 = LINE('',#124880,#124881); +#124880 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.559568066692)); +#124881 = VECTOR('',#124882,1.); +#124882 = DIRECTION('',(0.,1.,0.)); +#124883 = ORIENTED_EDGE('',*,*,#123115,.T.); +#124884 = PLANE('',#124885); +#124885 = AXIS2_PLACEMENT_3D('',#124886,#124887,#124888); +#124886 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.559568066692)); +#124887 = DIRECTION('',(-0.837379090715,0.,-0.546622592319)); +#124888 = DIRECTION('',(-0.546622592319,0.,0.837379090715)); +#124889 = ADVANCED_FACE('',(#124890),#124908,.T.); +#124890 = FACE_BOUND('',#124891,.T.); +#124891 = EDGE_LOOP('',(#124892,#124893,#124901,#124907)); +#124892 = ORIENTED_EDGE('',*,*,#124878,.T.); +#124893 = ORIENTED_EDGE('',*,*,#124894,.F.); +#124894 = EDGE_CURVE('',#124895,#124871,#124897,.T.); +#124895 = VERTEX_POINT('',#124896); +#124896 = CARTESIAN_POINT('',(3.1444,8.52,-1.601695760584)); +#124897 = LINE('',#124898,#124899); +#124898 = CARTESIAN_POINT('',(3.1444,8.52,-1.601695760584)); +#124899 = VECTOR('',#124900,1.); +#124900 = DIRECTION('',(-0.310279736268,0.,0.950645299395)); +#124901 = ORIENTED_EDGE('',*,*,#124902,.F.); +#124902 = EDGE_CURVE('',#123124,#124895,#124903,.T.); +#124903 = LINE('',#124904,#124905); +#124904 = CARTESIAN_POINT('',(3.1444,8.5,-1.601695760584)); +#124905 = VECTOR('',#124906,1.); +#124906 = DIRECTION('',(0.,1.,0.)); +#124907 = ORIENTED_EDGE('',*,*,#123123,.T.); +#124908 = PLANE('',#124909); +#124909 = AXIS2_PLACEMENT_3D('',#124910,#124911,#124912); +#124910 = CARTESIAN_POINT('',(3.1444,8.5,-1.601695760584)); +#124911 = DIRECTION('',(-0.950645299395,0.,-0.310279736268)); +#124912 = DIRECTION('',(-0.310279736268,0.,0.950645299395)); +#124913 = ADVANCED_FACE('',(#124914),#124932,.T.); +#124914 = FACE_BOUND('',#124915,.T.); +#124915 = EDGE_LOOP('',(#124916,#124917,#124925,#124931)); +#124916 = ORIENTED_EDGE('',*,*,#124902,.T.); +#124917 = ORIENTED_EDGE('',*,*,#124918,.F.); +#124918 = EDGE_CURVE('',#124919,#124895,#124921,.T.); +#124919 = VERTEX_POINT('',#124920); +#124920 = CARTESIAN_POINT('',(3.158150001639,8.52,-1.685951069689)); +#124921 = LINE('',#124922,#124923); +#124922 = CARTESIAN_POINT('',(3.158150001639,8.52,-1.685951069689)); +#124923 = VECTOR('',#124924,1.); +#124924 = DIRECTION('',(-0.16106381521,0.,0.986943994069)); +#124925 = ORIENTED_EDGE('',*,*,#124926,.F.); +#124926 = EDGE_CURVE('',#123132,#124919,#124927,.T.); +#124927 = LINE('',#124928,#124929); +#124928 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.685951069689)); +#124929 = VECTOR('',#124930,1.); +#124930 = DIRECTION('',(0.,1.,0.)); +#124931 = ORIENTED_EDGE('',*,*,#123131,.T.); +#124932 = PLANE('',#124933); +#124933 = AXIS2_PLACEMENT_3D('',#124934,#124935,#124936); +#124934 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.685951069689)); +#124935 = DIRECTION('',(-0.986943994069,0.,-0.16106381521)); +#124936 = DIRECTION('',(-0.16106381521,0.,0.986943994069)); +#124937 = ADVANCED_FACE('',(#124938),#124956,.T.); +#124938 = FACE_BOUND('',#124939,.T.); +#124939 = EDGE_LOOP('',(#124940,#124941,#124949,#124955)); +#124940 = ORIENTED_EDGE('',*,*,#124926,.T.); +#124941 = ORIENTED_EDGE('',*,*,#124942,.F.); +#124942 = EDGE_CURVE('',#124943,#124919,#124945,.T.); +#124943 = VERTEX_POINT('',#124944); +#124944 = CARTESIAN_POINT('',(3.158150001639,8.52,-1.714036172724)); +#124945 = LINE('',#124946,#124947); +#124946 = CARTESIAN_POINT('',(3.158150001639,8.52,-1.714036172724)); +#124947 = VECTOR('',#124948,1.); +#124948 = DIRECTION('',(0.,0.,1.)); +#124949 = ORIENTED_EDGE('',*,*,#124950,.F.); +#124950 = EDGE_CURVE('',#123140,#124943,#124951,.T.); +#124951 = LINE('',#124952,#124953); +#124952 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.714036172724)); +#124953 = VECTOR('',#124954,1.); +#124954 = DIRECTION('',(0.,1.,0.)); +#124955 = ORIENTED_EDGE('',*,*,#123139,.T.); +#124956 = PLANE('',#124957); +#124957 = AXIS2_PLACEMENT_3D('',#124958,#124959,#124960); +#124958 = CARTESIAN_POINT('',(3.158150001639,8.5,-1.714036172724)); +#124959 = DIRECTION('',(-1.,0.,0.)); +#124960 = DIRECTION('',(0.,0.,1.)); +#124961 = ADVANCED_FACE('',(#124962),#124980,.T.); +#124962 = FACE_BOUND('',#124963,.T.); +#124963 = EDGE_LOOP('',(#124964,#124965,#124973,#124979)); +#124964 = ORIENTED_EDGE('',*,*,#124950,.T.); +#124965 = ORIENTED_EDGE('',*,*,#124966,.F.); +#124966 = EDGE_CURVE('',#124967,#124943,#124969,.T.); +#124967 = VERTEX_POINT('',#124968); +#124968 = CARTESIAN_POINT('',(3.075649996722,8.52,-1.657865966654)); +#124969 = LINE('',#124970,#124971); +#124970 = CARTESIAN_POINT('',(3.075649996722,8.52,-1.657865966654)); +#124971 = VECTOR('',#124972,1.); +#124972 = DIRECTION('',(0.826599294405,0.,-0.562790908322)); +#124973 = ORIENTED_EDGE('',*,*,#124974,.F.); +#124974 = EDGE_CURVE('',#123148,#124967,#124975,.T.); +#124975 = LINE('',#124976,#124977); +#124976 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.657865966654)); +#124977 = VECTOR('',#124978,1.); +#124978 = DIRECTION('',(0.,1.,0.)); +#124979 = ORIENTED_EDGE('',*,*,#123147,.T.); +#124980 = PLANE('',#124981); +#124981 = AXIS2_PLACEMENT_3D('',#124982,#124983,#124984); +#124982 = CARTESIAN_POINT('',(3.075649996722,8.5,-1.657865966654)); +#124983 = DIRECTION('',(0.562790908322,0.,0.826599294405)); +#124984 = DIRECTION('',(0.,-1.,0.)); +#124985 = ADVANCED_FACE('',(#124986),#125004,.T.); +#124986 = FACE_BOUND('',#124987,.T.); +#124987 = EDGE_LOOP('',(#124988,#124989,#124997,#125003)); +#124988 = ORIENTED_EDGE('',*,*,#124974,.T.); +#124989 = ORIENTED_EDGE('',*,*,#124990,.F.); +#124990 = EDGE_CURVE('',#124991,#124967,#124993,.T.); +#124991 = VERTEX_POINT('',#124992); +#124992 = CARTESIAN_POINT('',(3.006899993443,8.52,-1.643823415136)); +#124993 = LINE('',#124994,#124995); +#124994 = CARTESIAN_POINT('',(3.006899993443,8.52,-1.643823415136)); +#124995 = VECTOR('',#124996,1.); +#124996 = DIRECTION('',(0.979770711149,0.,-0.200123345899)); +#124997 = ORIENTED_EDGE('',*,*,#124998,.F.); +#124998 = EDGE_CURVE('',#123156,#124991,#124999,.T.); +#124999 = LINE('',#125000,#125001); +#125000 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.643823415136)); +#125001 = VECTOR('',#125002,1.); +#125002 = DIRECTION('',(0.,1.,0.)); +#125003 = ORIENTED_EDGE('',*,*,#123155,.T.); +#125004 = PLANE('',#125005); +#125005 = AXIS2_PLACEMENT_3D('',#125006,#125007,#125008); +#125006 = CARTESIAN_POINT('',(3.006899993443,8.5,-1.643823415136)); +#125007 = DIRECTION('',(0.200123345899,0.,0.979770711149)); +#125008 = DIRECTION('',(0.,-1.,0.)); +#125009 = ADVANCED_FACE('',(#125010),#125028,.T.); +#125010 = FACE_BOUND('',#125011,.T.); +#125011 = EDGE_LOOP('',(#125012,#125013,#125021,#125027)); +#125012 = ORIENTED_EDGE('',*,*,#124998,.T.); +#125013 = ORIENTED_EDGE('',*,*,#125014,.F.); +#125014 = EDGE_CURVE('',#125015,#124991,#125017,.T.); +#125015 = VERTEX_POINT('',#125016); +#125016 = CARTESIAN_POINT('',(2.93815,8.52,-1.643823415136)); +#125017 = LINE('',#125018,#125019); +#125018 = CARTESIAN_POINT('',(2.93815,8.52,-1.643823415136)); +#125019 = VECTOR('',#125020,1.); +#125020 = DIRECTION('',(1.,0.,0.)); +#125021 = ORIENTED_EDGE('',*,*,#125022,.F.); +#125022 = EDGE_CURVE('',#123164,#125015,#125023,.T.); +#125023 = LINE('',#125024,#125025); +#125024 = CARTESIAN_POINT('',(2.93815,8.5,-1.643823415136)); +#125025 = VECTOR('',#125026,1.); +#125026 = DIRECTION('',(0.,1.,0.)); +#125027 = ORIENTED_EDGE('',*,*,#123163,.T.); +#125028 = PLANE('',#125029); +#125029 = AXIS2_PLACEMENT_3D('',#125030,#125031,#125032); +#125030 = CARTESIAN_POINT('',(2.93815,8.5,-1.643823415136)); +#125031 = DIRECTION('',(0.,0.,1.)); +#125032 = DIRECTION('',(1.,0.,-0.)); +#125033 = ADVANCED_FACE('',(#125034),#125052,.T.); +#125034 = FACE_BOUND('',#125035,.T.); +#125035 = EDGE_LOOP('',(#125036,#125037,#125045,#125051)); +#125036 = ORIENTED_EDGE('',*,*,#125022,.T.); +#125037 = ORIENTED_EDGE('',*,*,#125038,.F.); +#125038 = EDGE_CURVE('',#125039,#125015,#125041,.T.); +#125039 = VERTEX_POINT('',#125040); +#125040 = CARTESIAN_POINT('',(2.869399986887,8.52,-1.657865966654)); +#125041 = LINE('',#125042,#125043); +#125042 = CARTESIAN_POINT('',(2.869399986887,8.52,-1.657865966654)); +#125043 = VECTOR('',#125044,1.); +#125044 = DIRECTION('',(0.979770716763,0.,0.200123318418)); +#125045 = ORIENTED_EDGE('',*,*,#125046,.F.); +#125046 = EDGE_CURVE('',#123172,#125039,#125047,.T.); +#125047 = LINE('',#125048,#125049); +#125048 = CARTESIAN_POINT('',(2.869399986887,8.5,-1.657865966654)); +#125049 = VECTOR('',#125050,1.); +#125050 = DIRECTION('',(0.,1.,0.)); +#125051 = ORIENTED_EDGE('',*,*,#123171,.T.); +#125052 = PLANE('',#125053); +#125053 = AXIS2_PLACEMENT_3D('',#125054,#125055,#125056); +#125054 = CARTESIAN_POINT('',(2.869399986887,8.5,-1.657865966654)); +#125055 = DIRECTION('',(-0.200123318418,0.,0.979770716763)); +#125056 = DIRECTION('',(0.,1.,0.)); +#125057 = ADVANCED_FACE('',(#125058),#125069,.T.); +#125058 = FACE_BOUND('',#125059,.T.); +#125059 = EDGE_LOOP('',(#125060,#125061,#125067,#125068)); +#125060 = ORIENTED_EDGE('',*,*,#125046,.T.); +#125061 = ORIENTED_EDGE('',*,*,#125062,.F.); +#125062 = EDGE_CURVE('',#124119,#125039,#125063,.T.); +#125063 = LINE('',#125064,#125065); +#125064 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.699993621206)); +#125065 = VECTOR('',#125066,1.); +#125066 = DIRECTION('',(0.85265333382,0.,0.522477073493)); +#125067 = ORIENTED_EDGE('',*,*,#124118,.F.); +#125068 = ORIENTED_EDGE('',*,*,#123179,.T.); +#125069 = PLANE('',#125070); +#125070 = AXIS2_PLACEMENT_3D('',#125071,#125072,#125073); +#125071 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.699993621206)); +#125072 = DIRECTION('',(-0.522477073493,0.,0.85265333382)); +#125073 = DIRECTION('',(0.,1.,0.)); +#125074 = ADVANCED_FACE('',(#125075,#125117),#125279,.T.); +#125075 = FACE_BOUND('',#125076,.T.); +#125076 = EDGE_LOOP('',(#125077,#125078,#125079,#125080,#125081,#125082, + #125083,#125084,#125085,#125086,#125087,#125088,#125089,#125090, + #125091,#125092,#125093,#125094,#125095,#125096,#125097,#125098, + #125099,#125100,#125101,#125102,#125103,#125104,#125105,#125106, + #125107,#125108,#125109,#125110,#125111,#125112,#125113,#125114, + #125115,#125116)); +#125077 = ORIENTED_EDGE('',*,*,#125062,.T.); +#125078 = ORIENTED_EDGE('',*,*,#125038,.T.); +#125079 = ORIENTED_EDGE('',*,*,#125014,.T.); +#125080 = ORIENTED_EDGE('',*,*,#124990,.T.); +#125081 = ORIENTED_EDGE('',*,*,#124966,.T.); +#125082 = ORIENTED_EDGE('',*,*,#124942,.T.); +#125083 = ORIENTED_EDGE('',*,*,#124918,.T.); +#125084 = ORIENTED_EDGE('',*,*,#124894,.T.); +#125085 = ORIENTED_EDGE('',*,*,#124870,.T.); +#125086 = ORIENTED_EDGE('',*,*,#124846,.T.); +#125087 = ORIENTED_EDGE('',*,*,#124822,.T.); +#125088 = ORIENTED_EDGE('',*,*,#124798,.T.); +#125089 = ORIENTED_EDGE('',*,*,#124774,.T.); +#125090 = ORIENTED_EDGE('',*,*,#124750,.T.); +#125091 = ORIENTED_EDGE('',*,*,#124726,.T.); +#125092 = ORIENTED_EDGE('',*,*,#124702,.T.); +#125093 = ORIENTED_EDGE('',*,*,#124678,.T.); +#125094 = ORIENTED_EDGE('',*,*,#124654,.T.); +#125095 = ORIENTED_EDGE('',*,*,#124630,.T.); +#125096 = ORIENTED_EDGE('',*,*,#124606,.T.); +#125097 = ORIENTED_EDGE('',*,*,#124582,.T.); +#125098 = ORIENTED_EDGE('',*,*,#124558,.T.); +#125099 = ORIENTED_EDGE('',*,*,#124534,.T.); +#125100 = ORIENTED_EDGE('',*,*,#124510,.T.); +#125101 = ORIENTED_EDGE('',*,*,#124486,.T.); +#125102 = ORIENTED_EDGE('',*,*,#124462,.T.); +#125103 = ORIENTED_EDGE('',*,*,#124438,.T.); +#125104 = ORIENTED_EDGE('',*,*,#124414,.T.); +#125105 = ORIENTED_EDGE('',*,*,#124390,.T.); +#125106 = ORIENTED_EDGE('',*,*,#124366,.T.); +#125107 = ORIENTED_EDGE('',*,*,#124342,.T.); +#125108 = ORIENTED_EDGE('',*,*,#124318,.T.); +#125109 = ORIENTED_EDGE('',*,*,#124294,.T.); +#125110 = ORIENTED_EDGE('',*,*,#124270,.T.); +#125111 = ORIENTED_EDGE('',*,*,#124246,.T.); +#125112 = ORIENTED_EDGE('',*,*,#124222,.T.); +#125113 = ORIENTED_EDGE('',*,*,#124198,.T.); +#125114 = ORIENTED_EDGE('',*,*,#124174,.T.); +#125115 = ORIENTED_EDGE('',*,*,#124150,.T.); +#125116 = ORIENTED_EDGE('',*,*,#124126,.T.); +#125117 = FACE_BOUND('',#125118,.T.); +#125118 = EDGE_LOOP('',(#125119,#125129,#125137,#125145,#125153,#125161, + #125169,#125177,#125185,#125193,#125201,#125209,#125217,#125225, + #125233,#125241,#125249,#125257,#125265,#125273)); +#125119 = ORIENTED_EDGE('',*,*,#125120,.T.); +#125120 = EDGE_CURVE('',#125121,#125123,#125125,.T.); +#125121 = VERTEX_POINT('',#125122); +#125122 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.826376604533)); +#125123 = VERTEX_POINT('',#125124); +#125124 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.868504259086)); +#125125 = LINE('',#125126,#125127); +#125126 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.826376604533)); +#125127 = VECTOR('',#125128,1.); +#125128 = DIRECTION('',(0.,0.,-1.)); +#125129 = ORIENTED_EDGE('',*,*,#125130,.T.); +#125130 = EDGE_CURVE('',#125123,#125131,#125133,.T.); +#125131 = VERTEX_POINT('',#125132); +#125132 = CARTESIAN_POINT('',(2.8144,8.52,-1.910631913638)); +#125133 = LINE('',#125134,#125135); +#125134 = CARTESIAN_POINT('',(2.800650013113,8.52,-1.868504259086)); +#125135 = VECTOR('',#125136,1.); +#125136 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#125137 = ORIENTED_EDGE('',*,*,#125138,.T.); +#125138 = EDGE_CURVE('',#125131,#125139,#125141,.T.); +#125139 = VERTEX_POINT('',#125140); +#125140 = CARTESIAN_POINT('',(2.841900013113,8.52,-1.952759578025)); +#125141 = LINE('',#125142,#125143); +#125142 = CARTESIAN_POINT('',(2.8144,8.52,-1.910631913638)); +#125143 = VECTOR('',#125144,1.); +#125144 = DIRECTION('',(0.546622639915,0.,-0.837379059645)); +#125145 = ORIENTED_EDGE('',*,*,#125146,.T.); +#125146 = EDGE_CURVE('',#125139,#125147,#125149,.T.); +#125147 = VERTEX_POINT('',#125148); +#125148 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.98084468106)); +#125149 = LINE('',#125150,#125151); +#125150 = CARTESIAN_POINT('',(2.841900013113,8.52,-1.952759578025)); +#125151 = VECTOR('',#125152,1.); +#125152 = DIRECTION('',(0.8265992788,0.,-0.562790931242)); +#125153 = ORIENTED_EDGE('',*,*,#125154,.T.); +#125154 = EDGE_CURVE('',#125147,#125155,#125157,.T.); +#125155 = VERTEX_POINT('',#125156); +#125156 = CARTESIAN_POINT('',(2.924399993443,8.52,-1.994887232578)); +#125157 = LINE('',#125158,#125159); +#125158 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.98084468106)); +#125159 = VECTOR('',#125160,1.); +#125160 = DIRECTION('',(0.946649870891,0.,-0.322263901086)); +#125161 = ORIENTED_EDGE('',*,*,#125162,.T.); +#125162 = EDGE_CURVE('',#125155,#125163,#125165,.T.); +#125163 = VERTEX_POINT('',#125164); +#125164 = CARTESIAN_POINT('',(3.02065,8.52,-1.994887232578)); +#125165 = LINE('',#125166,#125167); +#125166 = CARTESIAN_POINT('',(2.924399993443,8.52,-1.994887232578)); +#125167 = VECTOR('',#125168,1.); +#125168 = DIRECTION('',(1.,0.,0.)); +#125169 = ORIENTED_EDGE('',*,*,#125170,.T.); +#125170 = EDGE_CURVE('',#125163,#125171,#125173,.T.); +#125171 = VERTEX_POINT('',#125172); +#125172 = CARTESIAN_POINT('',(3.0619,8.52,-1.98084468106)); +#125173 = LINE('',#125174,#125175); +#125174 = CARTESIAN_POINT('',(3.02065,8.52,-1.994887232578)); +#125175 = VECTOR('',#125176,1.); +#125176 = DIRECTION('',(0.94664991777,0.,0.322263763377)); +#125177 = ORIENTED_EDGE('',*,*,#125178,.T.); +#125178 = EDGE_CURVE('',#125171,#125179,#125181,.T.); +#125179 = VERTEX_POINT('',#125180); +#125180 = CARTESIAN_POINT('',(3.10315,8.52,-1.952759578025)); +#125181 = LINE('',#125182,#125183); +#125182 = CARTESIAN_POINT('',(3.0619,8.52,-1.98084468106)); +#125183 = VECTOR('',#125184,1.); +#125184 = DIRECTION('',(0.8265992788,0.,0.562790931242)); +#125185 = ORIENTED_EDGE('',*,*,#125186,.T.); +#125186 = EDGE_CURVE('',#125179,#125187,#125189,.T.); +#125187 = VERTEX_POINT('',#125188); +#125188 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.910631913638)); +#125189 = LINE('',#125190,#125191); +#125190 = CARTESIAN_POINT('',(3.10315,8.52,-1.952759578025)); +#125191 = VECTOR('',#125192,1.); +#125192 = DIRECTION('',(0.546622502839,0.,0.837379149126)); +#125193 = ORIENTED_EDGE('',*,*,#125194,.T.); +#125194 = EDGE_CURVE('',#125187,#125195,#125197,.T.); +#125195 = VERTEX_POINT('',#125196); +#125196 = CARTESIAN_POINT('',(3.1444,8.52,-1.868504259086)); +#125197 = LINE('',#125198,#125199); +#125198 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.910631913638)); +#125199 = VECTOR('',#125200,1.); +#125200 = DIRECTION('',(0.310279998114,0.,0.950645213931)); +#125201 = ORIENTED_EDGE('',*,*,#125202,.T.); +#125202 = EDGE_CURVE('',#125195,#125203,#125205,.T.); +#125203 = VERTEX_POINT('',#125204); +#125204 = CARTESIAN_POINT('',(3.1444,8.52,-1.826376604533)); +#125205 = LINE('',#125206,#125207); +#125206 = CARTESIAN_POINT('',(3.1444,8.52,-1.868504259086)); +#125207 = VECTOR('',#125208,1.); +#125208 = DIRECTION('',(0.,0.,1.)); +#125209 = ORIENTED_EDGE('',*,*,#125210,.T.); +#125210 = EDGE_CURVE('',#125203,#125211,#125213,.T.); +#125211 = VERTEX_POINT('',#125212); +#125212 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.784248930311)); +#125213 = LINE('',#125214,#125215); +#125214 = CARTESIAN_POINT('',(3.1444,8.52,-1.826376604533)); +#125215 = VECTOR('',#125216,1.); +#125216 = DIRECTION('',(-0.310279867191,0.,0.950645256663)); +#125217 = ORIENTED_EDGE('',*,*,#125218,.T.); +#125218 = EDGE_CURVE('',#125211,#125219,#125221,.T.); +#125219 = VERTEX_POINT('',#125220); +#125220 = CARTESIAN_POINT('',(3.10315,8.52,-1.756163827276)); +#125221 = LINE('',#125222,#125223); +#125222 = CARTESIAN_POINT('',(3.130650003278,8.52,-1.784248930311)); +#125223 = VECTOR('',#125224,1.); +#125224 = DIRECTION('',(-0.699624877766,0.,0.71451034311)); +#125225 = ORIENTED_EDGE('',*,*,#125226,.T.); +#125226 = EDGE_CURVE('',#125219,#125227,#125229,.T.); +#125227 = VERTEX_POINT('',#125228); +#125228 = CARTESIAN_POINT('',(3.0619,8.52,-1.728078724241)); +#125229 = LINE('',#125230,#125231); +#125230 = CARTESIAN_POINT('',(3.10315,8.52,-1.756163827276)); +#125231 = VECTOR('',#125232,1.); +#125232 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#125233 = ORIENTED_EDGE('',*,*,#125234,.T.); +#125234 = EDGE_CURVE('',#125227,#125235,#125237,.T.); +#125235 = VERTEX_POINT('',#125236); +#125236 = CARTESIAN_POINT('',(3.02065,8.52,-1.714036172724)); +#125237 = LINE('',#125238,#125239); +#125238 = CARTESIAN_POINT('',(3.0619,8.52,-1.728078724241)); +#125239 = VECTOR('',#125240,1.); +#125240 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#125241 = ORIENTED_EDGE('',*,*,#125242,.T.); +#125242 = EDGE_CURVE('',#125235,#125243,#125245,.T.); +#125243 = VERTEX_POINT('',#125244); +#125244 = CARTESIAN_POINT('',(2.924399993443,8.52,-1.714036172724)); +#125245 = LINE('',#125246,#125247); +#125246 = CARTESIAN_POINT('',(3.02065,8.52,-1.714036172724)); +#125247 = VECTOR('',#125248,1.); +#125248 = DIRECTION('',(-1.,0.,0.)); +#125249 = ORIENTED_EDGE('',*,*,#125250,.T.); +#125250 = EDGE_CURVE('',#125243,#125251,#125253,.T.); +#125251 = VERTEX_POINT('',#125252); +#125252 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.728078724241)); +#125253 = LINE('',#125254,#125255); +#125254 = CARTESIAN_POINT('',(2.924399993443,8.52,-1.714036172724)); +#125255 = VECTOR('',#125256,1.); +#125256 = DIRECTION('',(-0.946649870891,0.,-0.322263901086)); +#125257 = ORIENTED_EDGE('',*,*,#125258,.T.); +#125258 = EDGE_CURVE('',#125251,#125259,#125261,.T.); +#125259 = VERTEX_POINT('',#125260); +#125260 = CARTESIAN_POINT('',(2.841900013113,8.52,-1.756163827276)); +#125261 = LINE('',#125262,#125263); +#125262 = CARTESIAN_POINT('',(2.883150013113,8.52,-1.728078724241)); +#125263 = VECTOR('',#125264,1.); +#125264 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#125265 = ORIENTED_EDGE('',*,*,#125266,.T.); +#125266 = EDGE_CURVE('',#125259,#125267,#125269,.T.); +#125267 = VERTEX_POINT('',#125268); +#125268 = CARTESIAN_POINT('',(2.8144,8.52,-1.784248930311)); +#125269 = LINE('',#125270,#125271); +#125270 = CARTESIAN_POINT('',(2.841900013113,8.52,-1.756163827276)); +#125271 = VECTOR('',#125272,1.); +#125272 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#125273 = ORIENTED_EDGE('',*,*,#125274,.T.); +#125274 = EDGE_CURVE('',#125267,#125121,#125275,.T.); +#125275 = LINE('',#125276,#125277); +#125276 = CARTESIAN_POINT('',(2.8144,8.52,-1.784248930311)); +#125277 = VECTOR('',#125278,1.); +#125278 = DIRECTION('',(-0.310279666627,0.,-0.950645322125)); +#125279 = PLANE('',#125280); +#125280 = AXIS2_PLACEMENT_3D('',#125281,#125282,#125283); +#125281 = CARTESIAN_POINT('',(-4.75,8.52,0.)); +#125282 = DIRECTION('',(-0.,1.,0.)); +#125283 = DIRECTION('',(1.,0.,0.)); +#125284 = ADVANCED_FACE('',(#125285,#125495),#125641,.T.); +#125285 = FACE_BOUND('',#125286,.T.); +#125286 = EDGE_LOOP('',(#125287,#125297,#125305,#125313,#125321,#125329, + #125337,#125345,#125353,#125361,#125369,#125377,#125385,#125393, + #125401,#125409,#125417,#125425,#125433,#125441,#125449,#125457, + #125465,#125473,#125481,#125489)); +#125287 = ORIENTED_EDGE('',*,*,#125288,.T.); +#125288 = EDGE_CURVE('',#125289,#125291,#125293,.T.); +#125289 = VERTEX_POINT('',#125290); +#125290 = CARTESIAN_POINT('',(2.621899986887,8.52,-1.798291481829)); +#125291 = VERTEX_POINT('',#125292); +#125292 = CARTESIAN_POINT('',(2.60815,8.52,-1.868504259086)); +#125293 = LINE('',#125294,#125295); +#125294 = CARTESIAN_POINT('',(2.621899986887,8.52,-1.798291481829)); +#125295 = VECTOR('',#125296,1.); +#125296 = DIRECTION('',(-0.192182625054,0.,-0.981359179214)); +#125297 = ORIENTED_EDGE('',*,*,#125298,.T.); +#125298 = EDGE_CURVE('',#125291,#125299,#125301,.T.); +#125299 = VERTEX_POINT('',#125300); +#125300 = CARTESIAN_POINT('',(2.594400013113,8.52,-1.910631913638)); +#125301 = LINE('',#125302,#125303); +#125302 = CARTESIAN_POINT('',(2.60815,8.52,-1.868504259086)); +#125303 = VECTOR('',#125304,1.); +#125304 = DIRECTION('',(-0.310279797551,0.,-0.950645279393)); +#125305 = ORIENTED_EDGE('',*,*,#125306,.T.); +#125306 = EDGE_CURVE('',#125299,#125307,#125309,.T.); +#125307 = VERTEX_POINT('',#125308); +#125308 = CARTESIAN_POINT('',(2.5669,8.52,-1.966802129543)); +#125309 = LINE('',#125310,#125311); +#125310 = CARTESIAN_POINT('',(2.594400013113,8.52,-1.910631913638)); +#125311 = VECTOR('',#125312,1.); +#125312 = DIRECTION('',(-0.439713602853,0.,-0.898138044771)); +#125313 = ORIENTED_EDGE('',*,*,#125314,.T.); +#125314 = EDGE_CURVE('',#125307,#125315,#125317,.T.); +#125315 = VERTEX_POINT('',#125316); +#125316 = CARTESIAN_POINT('',(2.52565,8.52,-2.008929789013)); +#125317 = LINE('',#125318,#125319); +#125318 = CARTESIAN_POINT('',(2.5669,8.52,-1.966802129543)); +#125319 = VECTOR('',#125320,1.); +#125320 = DIRECTION('',(-0.699624793495,0.,-0.714510425625)); +#125321 = ORIENTED_EDGE('',*,*,#125322,.T.); +#125322 = EDGE_CURVE('',#125315,#125323,#125325,.T.); +#125323 = VERTEX_POINT('',#125324); +#125324 = CARTESIAN_POINT('',(2.456900026226,8.52,-2.051057447253)); +#125325 = LINE('',#125326,#125327); +#125326 = CARTESIAN_POINT('',(2.52565,8.52,-2.008929789013)); +#125327 = VECTOR('',#125328,1.); +#125328 = DIRECTION('',(-0.852653313443,0.,-0.522477106747)); +#125329 = ORIENTED_EDGE('',*,*,#125330,.T.); +#125330 = EDGE_CURVE('',#125323,#125331,#125333,.T.); +#125331 = VERTEX_POINT('',#125332); +#125332 = CARTESIAN_POINT('',(2.374400026226,8.52,-2.0651)); +#125333 = LINE('',#125334,#125335); +#125334 = CARTESIAN_POINT('',(2.456900026226,8.52,-2.051057447253)); +#125335 = VECTOR('',#125336,1.); +#125336 = DIRECTION('',(-0.985821170663,0.,-0.167799342885)); +#125337 = ORIENTED_EDGE('',*,*,#125338,.T.); +#125338 = EDGE_CURVE('',#125331,#125339,#125341,.T.); +#125339 = VERTEX_POINT('',#125340); +#125340 = CARTESIAN_POINT('',(2.291900026226,8.52,-2.051057447253)); +#125341 = LINE('',#125342,#125343); +#125342 = CARTESIAN_POINT('',(2.374400026226,8.52,-2.0651)); +#125343 = VECTOR('',#125344,1.); +#125344 = DIRECTION('',(-0.985821170663,0.,0.167799342885)); +#125345 = ORIENTED_EDGE('',*,*,#125346,.T.); +#125346 = EDGE_CURVE('',#125339,#125347,#125349,.T.); +#125347 = VERTEX_POINT('',#125348); +#125348 = CARTESIAN_POINT('',(2.223149973774,8.52,-2.008929789013)); +#125349 = LINE('',#125350,#125351); +#125350 = CARTESIAN_POINT('',(2.291900026226,8.52,-2.051057447253)); +#125351 = VECTOR('',#125352,1.); +#125352 = DIRECTION('',(-0.852653579815,0.,0.522476672043)); +#125353 = ORIENTED_EDGE('',*,*,#125354,.T.); +#125354 = EDGE_CURVE('',#125347,#125355,#125357,.T.); +#125355 = VERTEX_POINT('',#125356); +#125356 = CARTESIAN_POINT('',(2.181899973774,8.52,-1.966802129543)); +#125357 = LINE('',#125358,#125359); +#125358 = CARTESIAN_POINT('',(2.223149973774,8.52,-2.008929789013)); +#125359 = VECTOR('',#125360,1.); +#125360 = DIRECTION('',(-0.699624793495,0.,0.714510425625)); +#125361 = ORIENTED_EDGE('',*,*,#125362,.T.); +#125362 = EDGE_CURVE('',#125355,#125363,#125365,.T.); +#125363 = VERTEX_POINT('',#125364); +#125364 = CARTESIAN_POINT('',(2.1544,8.52,-1.910631913638)); +#125365 = LINE('',#125366,#125367); +#125366 = CARTESIAN_POINT('',(2.181899973774,8.52,-1.966802129543)); +#125367 = VECTOR('',#125368,1.); +#125368 = DIRECTION('',(-0.439713095457,0.,0.898138293184)); +#125369 = ORIENTED_EDGE('',*,*,#125370,.T.); +#125370 = EDGE_CURVE('',#125363,#125371,#125373,.T.); +#125371 = VERTEX_POINT('',#125372); +#125372 = CARTESIAN_POINT('',(2.140649973774,8.52,-1.868504259086)); +#125373 = LINE('',#125374,#125375); +#125374 = CARTESIAN_POINT('',(2.1544,8.52,-1.910631913638)); +#125375 = VECTOR('',#125376,1.); +#125376 = DIRECTION('',(-0.310280599805,0.,0.950645017546)); +#125377 = ORIENTED_EDGE('',*,*,#125378,.T.); +#125378 = EDGE_CURVE('',#125371,#125379,#125381,.T.); +#125379 = VERTEX_POINT('',#125380); +#125380 = CARTESIAN_POINT('',(2.126900026226,8.52,-1.798291481829)); +#125381 = LINE('',#125382,#125383); +#125382 = CARTESIAN_POINT('',(2.140649973774,8.52,-1.868504259086)); +#125383 = VECTOR('',#125384,1.); +#125384 = DIRECTION('',(-0.192182095523,0.,0.981359282913)); +#125385 = ORIENTED_EDGE('',*,*,#125386,.T.); +#125386 = EDGE_CURVE('',#125379,#125387,#125389,.T.); +#125387 = VERTEX_POINT('',#125388); +#125388 = CARTESIAN_POINT('',(2.126900026226,8.52,-1.671908518171)); +#125389 = LINE('',#125390,#125391); +#125390 = CARTESIAN_POINT('',(2.126900026226,8.52,-1.798291481829)); +#125391 = VECTOR('',#125392,1.); +#125392 = DIRECTION('',(0.,0.,1.)); +#125393 = ORIENTED_EDGE('',*,*,#125394,.T.); +#125394 = EDGE_CURVE('',#125387,#125395,#125397,.T.); +#125395 = VERTEX_POINT('',#125396); +#125396 = CARTESIAN_POINT('',(2.140649973774,8.52,-1.601695760584)); +#125397 = LINE('',#125398,#125399); +#125398 = CARTESIAN_POINT('',(2.126900026226,8.52,-1.671908518171)); +#125399 = VECTOR('',#125400,1.); +#125400 = DIRECTION('',(0.192182147373,0.,0.98135927276)); +#125401 = ORIENTED_EDGE('',*,*,#125402,.T.); +#125402 = EDGE_CURVE('',#125395,#125403,#125405,.T.); +#125403 = VERTEX_POINT('',#125404); +#125404 = CARTESIAN_POINT('',(2.1544,8.52,-1.559568066692)); +#125405 = LINE('',#125406,#125407); +#125406 = CARTESIAN_POINT('',(2.140649973774,8.52,-1.601695760584)); +#125407 = VECTOR('',#125408,1.); +#125408 = DIRECTION('',(0.310280337958,0.,0.95064510301)); +#125409 = ORIENTED_EDGE('',*,*,#125410,.T.); +#125410 = EDGE_CURVE('',#125403,#125411,#125413,.T.); +#125411 = VERTEX_POINT('',#125412); +#125412 = CARTESIAN_POINT('',(2.181899973774,8.52,-1.503397860622)); +#125413 = LINE('',#125414,#125415); +#125414 = CARTESIAN_POINT('',(2.1544,8.52,-1.559568066692)); +#125415 = VECTOR('',#125416,1.); +#125416 = DIRECTION('',(0.43971315756,0.,0.898138262779)); +#125417 = ORIENTED_EDGE('',*,*,#125418,.T.); +#125418 = EDGE_CURVE('',#125411,#125419,#125421,.T.); +#125419 = VERTEX_POINT('',#125420); +#125420 = CARTESIAN_POINT('',(2.223149973774,8.52,-1.46127020607)); +#125421 = LINE('',#125422,#125423); +#125422 = CARTESIAN_POINT('',(2.181899973774,8.52,-1.503397860622)); +#125423 = VECTOR('',#125424,1.); +#125424 = DIRECTION('',(0.699624835187,0.,0.714510384802)); +#125425 = ORIENTED_EDGE('',*,*,#125426,.T.); +#125426 = EDGE_CURVE('',#125419,#125427,#125429,.T.); +#125427 = VERTEX_POINT('',#125428); +#125428 = CARTESIAN_POINT('',(2.291900026226,8.52,-1.419142551517)); +#125429 = LINE('',#125430,#125431); +#125430 = CARTESIAN_POINT('',(2.223149973774,8.52,-1.46127020607)); +#125431 = VECTOR('',#125432,1.); +#125432 = DIRECTION('',(0.852653600191,0.,0.52247663879)); +#125433 = ORIENTED_EDGE('',*,*,#125434,.T.); +#125434 = EDGE_CURVE('',#125427,#125435,#125437,.T.); +#125435 = VERTEX_POINT('',#125436); +#125436 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.4051)); +#125437 = LINE('',#125438,#125439); +#125438 = CARTESIAN_POINT('',(2.291900026226,8.52,-1.419142551517)); +#125439 = VECTOR('',#125440,1.); +#125440 = DIRECTION('',(0.985821173093,0.,0.167799328608)); +#125441 = ORIENTED_EDGE('',*,*,#125442,.T.); +#125442 = EDGE_CURVE('',#125435,#125443,#125445,.T.); +#125443 = VERTEX_POINT('',#125444); +#125444 = CARTESIAN_POINT('',(2.456900026226,8.52,-1.419142551517)); +#125445 = LINE('',#125446,#125447); +#125446 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.4051)); +#125447 = VECTOR('',#125448,1.); +#125448 = DIRECTION('',(0.985821173093,0.,-0.167799328608)); +#125449 = ORIENTED_EDGE('',*,*,#125450,.T.); +#125450 = EDGE_CURVE('',#125443,#125451,#125453,.T.); +#125451 = VERTEX_POINT('',#125452); +#125452 = CARTESIAN_POINT('',(2.52565,8.52,-1.46127020607)); +#125453 = LINE('',#125454,#125455); +#125454 = CARTESIAN_POINT('',(2.456900026226,8.52,-1.419142551517)); +#125455 = VECTOR('',#125456,1.); +#125456 = DIRECTION('',(0.85265333382,0.,-0.522477073493)); +#125457 = ORIENTED_EDGE('',*,*,#125458,.T.); +#125458 = EDGE_CURVE('',#125451,#125459,#125461,.T.); +#125459 = VERTEX_POINT('',#125460); +#125460 = CARTESIAN_POINT('',(2.5669,8.52,-1.503397860622)); +#125461 = LINE('',#125462,#125463); +#125462 = CARTESIAN_POINT('',(2.52565,8.52,-1.46127020607)); +#125463 = VECTOR('',#125464,1.); +#125464 = DIRECTION('',(0.699624835187,0.,-0.714510384802)); +#125465 = ORIENTED_EDGE('',*,*,#125466,.T.); +#125466 = EDGE_CURVE('',#125459,#125467,#125469,.T.); +#125467 = VERTEX_POINT('',#125468); +#125468 = CARTESIAN_POINT('',(2.594400013113,8.52,-1.559568066692)); +#125469 = LINE('',#125470,#125471); +#125470 = CARTESIAN_POINT('',(2.5669,8.52,-1.503397860622)); +#125471 = VECTOR('',#125472,1.); +#125472 = DIRECTION('',(0.439713664957,0.,-0.898138014367)); +#125473 = ORIENTED_EDGE('',*,*,#125474,.T.); +#125474 = EDGE_CURVE('',#125467,#125475,#125477,.T.); +#125475 = VERTEX_POINT('',#125476); +#125476 = CARTESIAN_POINT('',(2.60815,8.52,-1.601695760584)); +#125477 = LINE('',#125478,#125479); +#125478 = CARTESIAN_POINT('',(2.594400013113,8.52,-1.559568066692)); +#125479 = VECTOR('',#125480,1.); +#125480 = DIRECTION('',(0.310279535704,0.,-0.950645364857)); +#125481 = ORIENTED_EDGE('',*,*,#125482,.T.); +#125482 = EDGE_CURVE('',#125475,#125483,#125485,.T.); +#125483 = VERTEX_POINT('',#125484); +#125484 = CARTESIAN_POINT('',(2.621899986887,8.52,-1.671908518171)); +#125485 = LINE('',#125486,#125487); +#125486 = CARTESIAN_POINT('',(2.60815,8.52,-1.601695760584)); +#125487 = VECTOR('',#125488,1.); +#125488 = DIRECTION('',(0.192182676904,0.,-0.98135916906)); +#125489 = ORIENTED_EDGE('',*,*,#125490,.T.); +#125490 = EDGE_CURVE('',#125483,#125289,#125491,.T.); +#125491 = LINE('',#125492,#125493); +#125492 = CARTESIAN_POINT('',(2.621899986887,8.52,-1.671908518171)); +#125493 = VECTOR('',#125494,1.); +#125494 = DIRECTION('',(0.,0.,-1.)); +#125495 = FACE_BOUND('',#125496,.T.); +#125496 = EDGE_LOOP('',(#125497,#125507,#125515,#125523,#125531,#125539, + #125547,#125555,#125563,#125571,#125579,#125587,#125595,#125603, + #125611,#125619,#125627,#125635)); +#125497 = ORIENTED_EDGE('',*,*,#125498,.T.); +#125498 = EDGE_CURVE('',#125499,#125501,#125503,.T.); +#125499 = VERTEX_POINT('',#125500); +#125500 = CARTESIAN_POINT('',(2.539400026226,8.52,-1.601695760584)); +#125501 = VERTEX_POINT('',#125502); +#125502 = CARTESIAN_POINT('',(2.4844,8.52,-1.51744041214)); +#125503 = LINE('',#125504,#125505); +#125504 = CARTESIAN_POINT('',(2.539400026226,8.52,-1.601695760584)); +#125505 = VECTOR('',#125506,1.); +#125506 = DIRECTION('',(-0.546622550435,0.,0.837379118056)); +#125507 = ORIENTED_EDGE('',*,*,#125508,.T.); +#125508 = EDGE_CURVE('',#125501,#125509,#125511,.T.); +#125509 = VERTEX_POINT('',#125510); +#125510 = CARTESIAN_POINT('',(2.44315,8.52,-1.489355309105)); +#125511 = LINE('',#125512,#125513); +#125512 = CARTESIAN_POINT('',(2.4844,8.52,-1.51744041214)); +#125513 = VECTOR('',#125514,1.); +#125514 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#125515 = ORIENTED_EDGE('',*,*,#125516,.T.); +#125516 = EDGE_CURVE('',#125509,#125517,#125519,.T.); +#125517 = VERTEX_POINT('',#125518); +#125518 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.475312757587)); +#125519 = LINE('',#125520,#125521); +#125520 = CARTESIAN_POINT('',(2.44315,8.52,-1.489355309105)); +#125521 = VECTOR('',#125522,1.); +#125522 = DIRECTION('',(-0.97977069431,0.,0.200123428343)); +#125523 = ORIENTED_EDGE('',*,*,#125524,.T.); +#125524 = EDGE_CURVE('',#125517,#125525,#125527,.T.); +#125525 = VERTEX_POINT('',#125526); +#125526 = CARTESIAN_POINT('',(2.305649973774,8.52,-1.489355309105)); +#125527 = LINE('',#125528,#125529); +#125528 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.475312757587)); +#125529 = VECTOR('',#125530,1.); +#125530 = DIRECTION('',(-0.979770739215,0.,-0.200123208493)); +#125531 = ORIENTED_EDGE('',*,*,#125532,.T.); +#125532 = EDGE_CURVE('',#125525,#125533,#125535,.T.); +#125533 = VERTEX_POINT('',#125534); +#125534 = CARTESIAN_POINT('',(2.264399973774,8.52,-1.51744041214)); +#125535 = LINE('',#125536,#125537); +#125536 = CARTESIAN_POINT('',(2.305649973774,8.52,-1.489355309105)); +#125537 = VECTOR('',#125538,1.); +#125538 = DIRECTION('',(-0.8265992788,0.,-0.562790931242)); +#125539 = ORIENTED_EDGE('',*,*,#125540,.T.); +#125540 = EDGE_CURVE('',#125533,#125541,#125543,.T.); +#125541 = VERTEX_POINT('',#125542); +#125542 = CARTESIAN_POINT('',(2.209400026226,8.52,-1.601695760584)); +#125543 = LINE('',#125544,#125545); +#125544 = CARTESIAN_POINT('',(2.264399973774,8.52,-1.51744041214)); +#125545 = VECTOR('',#125546,1.); +#125546 = DIRECTION('',(-0.546622002129,0.,-0.837379475978)); +#125547 = ORIENTED_EDGE('',*,*,#125548,.T.); +#125548 = EDGE_CURVE('',#125541,#125549,#125551,.T.); +#125549 = VERTEX_POINT('',#125550); +#125550 = CARTESIAN_POINT('',(2.19565,8.52,-1.685951069689)); +#125551 = LINE('',#125552,#125553); +#125552 = CARTESIAN_POINT('',(2.209400026226,8.52,-1.601695760584)); +#125553 = VECTOR('',#125554,1.); +#125554 = DIRECTION('',(-0.161064095744,0.,-0.986943948288)); +#125555 = ORIENTED_EDGE('',*,*,#125556,.T.); +#125556 = EDGE_CURVE('',#125549,#125557,#125559,.T.); +#125557 = VERTEX_POINT('',#125558); +#125558 = CARTESIAN_POINT('',(2.19565,8.52,-1.784248930311)); +#125559 = LINE('',#125560,#125561); +#125560 = CARTESIAN_POINT('',(2.19565,8.52,-1.685951069689)); +#125561 = VECTOR('',#125562,1.); +#125562 = DIRECTION('',(0.,0.,-1.)); +#125563 = ORIENTED_EDGE('',*,*,#125564,.T.); +#125564 = EDGE_CURVE('',#125557,#125565,#125567,.T.); +#125565 = VERTEX_POINT('',#125566); +#125566 = CARTESIAN_POINT('',(2.209400026226,8.52,-1.868504259086)); +#125567 = LINE('',#125568,#125569); +#125568 = CARTESIAN_POINT('',(2.19565,8.52,-1.784248930311)); +#125569 = VECTOR('',#125570,1.); +#125570 = DIRECTION('',(0.161064059119,0.,-0.986943954265)); +#125571 = ORIENTED_EDGE('',*,*,#125572,.T.); +#125572 = EDGE_CURVE('',#125565,#125573,#125575,.T.); +#125573 = VERTEX_POINT('',#125574); +#125574 = CARTESIAN_POINT('',(2.264399973774,8.52,-1.952759578025)); +#125575 = LINE('',#125576,#125577); +#125576 = CARTESIAN_POINT('',(2.209400026226,8.52,-1.868504259086)); +#125577 = VECTOR('',#125578,1.); +#125578 = DIRECTION('',(0.546622136349,0.,-0.837379388362)); +#125579 = ORIENTED_EDGE('',*,*,#125580,.T.); +#125580 = EDGE_CURVE('',#125573,#125581,#125583,.T.); +#125581 = VERTEX_POINT('',#125582); +#125582 = CARTESIAN_POINT('',(2.305649973774,8.52,-1.98084468106)); +#125583 = LINE('',#125584,#125585); +#125584 = CARTESIAN_POINT('',(2.264399973774,8.52,-1.952759578025)); +#125585 = VECTOR('',#125586,1.); +#125586 = DIRECTION('',(0.8265992788,0.,-0.562790931242)); +#125587 = ORIENTED_EDGE('',*,*,#125588,.T.); +#125588 = EDGE_CURVE('',#125581,#125589,#125591,.T.); +#125589 = VERTEX_POINT('',#125590); +#125590 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.994887232578)); +#125591 = LINE('',#125592,#125593); +#125592 = CARTESIAN_POINT('',(2.305649973774,8.52,-1.98084468106)); +#125593 = VECTOR('',#125594,1.); +#125594 = DIRECTION('',(0.979770739215,0.,-0.200123208493)); +#125595 = ORIENTED_EDGE('',*,*,#125596,.T.); +#125596 = EDGE_CURVE('',#125589,#125597,#125599,.T.); +#125597 = VERTEX_POINT('',#125598); +#125598 = CARTESIAN_POINT('',(2.44315,8.52,-1.98084468106)); +#125599 = LINE('',#125600,#125601); +#125600 = CARTESIAN_POINT('',(2.374400026226,8.52,-1.994887232578)); +#125601 = VECTOR('',#125602,1.); +#125602 = DIRECTION('',(0.97977069431,0.,0.200123428343)); +#125603 = ORIENTED_EDGE('',*,*,#125604,.T.); +#125604 = EDGE_CURVE('',#125597,#125605,#125607,.T.); +#125605 = VERTEX_POINT('',#125606); +#125606 = CARTESIAN_POINT('',(2.4844,8.52,-1.952759578025)); +#125607 = LINE('',#125608,#125609); +#125608 = CARTESIAN_POINT('',(2.44315,8.52,-1.98084468106)); +#125609 = VECTOR('',#125610,1.); +#125610 = DIRECTION('',(0.8265992788,0.,0.562790931242)); +#125611 = ORIENTED_EDGE('',*,*,#125612,.T.); +#125612 = EDGE_CURVE('',#125605,#125613,#125615,.T.); +#125613 = VERTEX_POINT('',#125614); +#125614 = CARTESIAN_POINT('',(2.539400026226,8.52,-1.868504259086)); +#125615 = LINE('',#125616,#125617); +#125616 = CARTESIAN_POINT('',(2.4844,8.52,-1.952759578025)); +#125617 = VECTOR('',#125618,1.); +#125618 = DIRECTION('',(0.546622684656,0.,0.83737903044)); +#125619 = ORIENTED_EDGE('',*,*,#125620,.T.); +#125620 = EDGE_CURVE('',#125613,#125621,#125623,.T.); +#125621 = VERTEX_POINT('',#125622); +#125622 = CARTESIAN_POINT('',(2.553149973774,8.52,-1.784248930311)); +#125623 = LINE('',#125624,#125625); +#125624 = CARTESIAN_POINT('',(2.539400026226,8.52,-1.868504259086)); +#125625 = VECTOR('',#125626,1.); +#125626 = DIRECTION('',(0.161063161412,0.,0.986944100766)); +#125627 = ORIENTED_EDGE('',*,*,#125628,.T.); +#125628 = EDGE_CURVE('',#125621,#125629,#125631,.T.); +#125629 = VERTEX_POINT('',#125630); +#125630 = CARTESIAN_POINT('',(2.553149973774,8.52,-1.685951069689)); +#125631 = LINE('',#125632,#125633); +#125632 = CARTESIAN_POINT('',(2.553149973774,8.52,-1.784248930311)); +#125633 = VECTOR('',#125634,1.); +#125634 = DIRECTION('',(0.,0.,1.)); +#125635 = ORIENTED_EDGE('',*,*,#125636,.T.); +#125636 = EDGE_CURVE('',#125629,#125499,#125637,.T.); +#125637 = LINE('',#125638,#125639); +#125638 = CARTESIAN_POINT('',(2.553149973774,8.52,-1.685951069689)); +#125639 = VECTOR('',#125640,1.); +#125640 = DIRECTION('',(-0.161063198037,0.,0.986944094789)); +#125641 = PLANE('',#125642); +#125642 = AXIS2_PLACEMENT_3D('',#125643,#125644,#125645); +#125643 = CARTESIAN_POINT('',(-4.75,8.52,0.)); +#125644 = DIRECTION('',(-0.,1.,0.)); +#125645 = DIRECTION('',(1.,0.,0.)); +#125646 = ADVANCED_FACE('',(#125647,#125801,#125883),#125965,.T.); +#125647 = FACE_BOUND('',#125648,.T.); +#125648 = EDGE_LOOP('',(#125649,#125659,#125667,#125675,#125683,#125691, + #125699,#125707,#125715,#125723,#125731,#125739,#125747,#125755, + #125763,#125771,#125779,#125787,#125795)); +#125649 = ORIENTED_EDGE('',*,*,#125650,.T.); +#125650 = EDGE_CURVE('',#125651,#125653,#125655,.T.); +#125651 = VERTEX_POINT('',#125652); +#125652 = CARTESIAN_POINT('',(-2.7948,8.52,-1.685951066113)); +#125653 = VERTEX_POINT('',#125654); +#125654 = CARTESIAN_POINT('',(-2.8323,8.52,-1.634887242413)); +#125655 = LINE('',#125656,#125657); +#125656 = CARTESIAN_POINT('',(-2.7948,8.52,-1.685951066113)); +#125657 = VECTOR('',#125658,1.); +#125658 = DIRECTION('',(-0.59190954875,0.,0.806004395831)); +#125659 = ORIENTED_EDGE('',*,*,#125660,.T.); +#125660 = EDGE_CURVE('',#125653,#125661,#125663,.T.); +#125661 = VERTEX_POINT('',#125662); +#125662 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.596589374638)); +#125663 = LINE('',#125664,#125665); +#125664 = CARTESIAN_POINT('',(-2.8323,8.52,-1.634887242413)); +#125665 = VECTOR('',#125666,1.); +#125666 = DIRECTION('',(-0.310279797551,0.,0.950645279393)); +#125667 = ORIENTED_EDGE('',*,*,#125668,.T.); +#125668 = EDGE_CURVE('',#125661,#125669,#125671,.T.); +#125669 = VERTEX_POINT('',#125670); +#125670 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.545525515175)); +#125671 = LINE('',#125672,#125673); +#125672 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.596589374638)); +#125673 = VECTOR('',#125674,1.); +#125674 = DIRECTION('',(0.,0.,1.)); +#125675 = ORIENTED_EDGE('',*,*,#125676,.T.); +#125676 = EDGE_CURVE('',#125669,#125677,#125679,.T.); +#125677 = VERTEX_POINT('',#125678); +#125678 = CARTESIAN_POINT('',(-2.8323,8.52,-1.5072276474)); +#125679 = LINE('',#125680,#125681); +#125680 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.545525515175)); +#125681 = VECTOR('',#125682,1.); +#125682 = DIRECTION('',(0.310279797551,0.,0.950645279393)); +#125683 = ORIENTED_EDGE('',*,*,#125684,.T.); +#125684 = EDGE_CURVE('',#125677,#125685,#125687,.T.); +#125685 = VERTEX_POINT('',#125686); +#125686 = CARTESIAN_POINT('',(-2.7948,8.52,-1.4561638237)); +#125687 = LINE('',#125688,#125689); +#125688 = CARTESIAN_POINT('',(-2.8323,8.52,-1.5072276474)); +#125689 = VECTOR('',#125690,1.); +#125690 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#125691 = ORIENTED_EDGE('',*,*,#125692,.T.); +#125692 = EDGE_CURVE('',#125685,#125693,#125695,.T.); +#125693 = VERTEX_POINT('',#125694); +#125694 = CARTESIAN_POINT('',(-2.744800011921,8.52,-1.417865955925)); +#125695 = LINE('',#125696,#125697); +#125696 = CARTESIAN_POINT('',(-2.7948,8.52,-1.4561638237)); +#125697 = VECTOR('',#125698,1.); +#125698 = DIRECTION('',(0.793878111009,0.,0.608076923474)); +#125699 = ORIENTED_EDGE('',*,*,#125700,.T.); +#125700 = EDGE_CURVE('',#125693,#125701,#125703,.T.); +#125701 = VERTEX_POINT('',#125702); +#125702 = CARTESIAN_POINT('',(-2.6823,8.52,-1.4051)); +#125703 = LINE('',#125704,#125705); +#125704 = CARTESIAN_POINT('',(-2.744800011921,8.52,-1.417865955925)); +#125705 = VECTOR('',#125706,1.); +#125706 = DIRECTION('',(0.979770716763,0.,0.200123318418)); +#125707 = ORIENTED_EDGE('',*,*,#125708,.T.); +#125708 = EDGE_CURVE('',#125701,#125709,#125711,.T.); +#125709 = VERTEX_POINT('',#125710); +#125710 = CARTESIAN_POINT('',(-2.3823,8.52,-1.4051)); +#125711 = LINE('',#125712,#125713); +#125712 = CARTESIAN_POINT('',(-2.6823,8.52,-1.4051)); +#125713 = VECTOR('',#125714,1.); +#125714 = DIRECTION('',(1.,0.,0.)); +#125715 = ORIENTED_EDGE('',*,*,#125716,.T.); +#125716 = EDGE_CURVE('',#125709,#125717,#125719,.T.); +#125717 = VERTEX_POINT('',#125718); +#125718 = CARTESIAN_POINT('',(-2.3823,8.52,-2.0051)); +#125719 = LINE('',#125720,#125721); +#125720 = CARTESIAN_POINT('',(-2.3823,8.52,-1.4051)); +#125721 = VECTOR('',#125722,1.); +#125722 = DIRECTION('',(0.,0.,-1.)); +#125723 = ORIENTED_EDGE('',*,*,#125724,.T.); +#125724 = EDGE_CURVE('',#125717,#125725,#125727,.T.); +#125725 = VERTEX_POINT('',#125726); +#125726 = CARTESIAN_POINT('',(-2.6823,8.52,-2.0051)); +#125727 = LINE('',#125728,#125729); +#125728 = CARTESIAN_POINT('',(-2.3823,8.52,-2.0051)); +#125729 = VECTOR('',#125730,1.); +#125730 = DIRECTION('',(-1.,0.,0.)); +#125731 = ORIENTED_EDGE('',*,*,#125732,.T.); +#125732 = EDGE_CURVE('',#125725,#125733,#125735,.T.); +#125733 = VERTEX_POINT('',#125734); +#125734 = CARTESIAN_POINT('',(-2.744800011921,8.52,-1.992334042957)); +#125735 = LINE('',#125736,#125737); +#125736 = CARTESIAN_POINT('',(-2.6823,8.52,-2.0051)); +#125737 = VECTOR('',#125738,1.); +#125738 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#125739 = ORIENTED_EDGE('',*,*,#125740,.T.); +#125740 = EDGE_CURVE('',#125733,#125741,#125743,.T.); +#125741 = VERTEX_POINT('',#125742); +#125742 = CARTESIAN_POINT('',(-2.7948,8.52,-1.95403617183)); +#125743 = LINE('',#125744,#125745); +#125744 = CARTESIAN_POINT('',(-2.744800011921,8.52,-1.992334042957)); +#125745 = VECTOR('',#125746,1.); +#125746 = DIRECTION('',(-0.793878085311,0.,0.608076957024)); +#125747 = ORIENTED_EDGE('',*,*,#125748,.T.); +#125748 = EDGE_CURVE('',#125741,#125749,#125751,.T.); +#125749 = VERTEX_POINT('',#125750); +#125750 = CARTESIAN_POINT('',(-2.8323,8.52,-1.902972343659)); +#125751 = LINE('',#125752,#125753); +#125752 = CARTESIAN_POINT('',(-2.7948,8.52,-1.95403617183)); +#125753 = VECTOR('',#125754,1.); +#125754 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#125755 = ORIENTED_EDGE('',*,*,#125756,.T.); +#125756 = EDGE_CURVE('',#125749,#125757,#125759,.T.); +#125757 = VERTEX_POINT('',#125758); +#125758 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.864674466944)); +#125759 = LINE('',#125760,#125761); +#125760 = CARTESIAN_POINT('',(-2.8323,8.52,-1.902972343659)); +#125761 = VECTOR('',#125762,1.); +#125762 = DIRECTION('',(-0.310279732089,0.,0.950645300759)); +#125763 = ORIENTED_EDGE('',*,*,#125764,.T.); +#125764 = EDGE_CURVE('',#125757,#125765,#125767,.T.); +#125765 = VERTEX_POINT('',#125766); +#125766 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.800844687319)); +#125767 = LINE('',#125768,#125769); +#125768 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.864674466944)); +#125769 = VECTOR('',#125770,1.); +#125770 = DIRECTION('',(0.,0.,1.)); +#125771 = ORIENTED_EDGE('',*,*,#125772,.T.); +#125772 = EDGE_CURVE('',#125765,#125773,#125775,.T.); +#125773 = VERTEX_POINT('',#125774); +#125774 = CARTESIAN_POINT('',(-2.8323,8.52,-1.762546801662)); +#125775 = LINE('',#125776,#125777); +#125776 = CARTESIAN_POINT('',(-2.844799988079,8.52,-1.800844687319)); +#125777 = VECTOR('',#125778,1.); +#125778 = DIRECTION('',(0.310279666627,0.,0.950645322125)); +#125779 = ORIENTED_EDGE('',*,*,#125780,.T.); +#125780 = EDGE_CURVE('',#125773,#125781,#125783,.T.); +#125781 = VERTEX_POINT('',#125782); +#125782 = CARTESIAN_POINT('',(-2.7948,8.52,-1.711482977962)); +#125783 = LINE('',#125784,#125785); +#125784 = CARTESIAN_POINT('',(-2.8323,8.52,-1.762546801662)); +#125785 = VECTOR('',#125786,1.); +#125786 = DIRECTION('',(0.59190954875,0.,0.806004395831)); +#125787 = ORIENTED_EDGE('',*,*,#125788,.T.); +#125788 = EDGE_CURVE('',#125781,#125789,#125791,.T.); +#125789 = VERTEX_POINT('',#125790); +#125790 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.698717022038)); +#125791 = LINE('',#125792,#125793); +#125792 = CARTESIAN_POINT('',(-2.7948,8.52,-1.711482977962)); +#125793 = VECTOR('',#125794,1.); +#125794 = DIRECTION('',(0.890605374698,0.,0.454776941543)); +#125795 = ORIENTED_EDGE('',*,*,#125796,.T.); +#125796 = EDGE_CURVE('',#125789,#125651,#125797,.T.); +#125797 = LINE('',#125798,#125799); +#125798 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.698717022038)); +#125799 = VECTOR('',#125800,1.); +#125800 = DIRECTION('',(-0.890605374698,0.,0.454776941543)); +#125801 = FACE_BOUND('',#125802,.T.); +#125802 = EDGE_LOOP('',(#125803,#125813,#125821,#125829,#125837,#125845, + #125853,#125861,#125869,#125877)); +#125803 = ORIENTED_EDGE('',*,*,#125804,.T.); +#125804 = EDGE_CURVE('',#125805,#125807,#125809,.T.); +#125805 = VERTEX_POINT('',#125806); +#125806 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.48169573555)); +#125807 = VERTEX_POINT('',#125808); +#125808 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.494461691475)); +#125809 = LINE('',#125810,#125811); +#125810 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.48169573555)); +#125811 = VECTOR('',#125812,1.); +#125812 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#125813 = ORIENTED_EDGE('',*,*,#125814,.T.); +#125814 = EDGE_CURVE('',#125807,#125815,#125817,.T.); +#125815 = VERTEX_POINT('',#125816); +#125816 = CARTESIAN_POINT('',(-2.7573,8.52,-1.519993603325)); +#125817 = LINE('',#125818,#125819); +#125818 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.494461691475)); +#125819 = VECTOR('',#125820,1.); +#125820 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#125821 = ORIENTED_EDGE('',*,*,#125822,.T.); +#125822 = EDGE_CURVE('',#125815,#125823,#125825,.T.); +#125823 = VERTEX_POINT('',#125824); +#125824 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.558291506863)); +#125825 = LINE('',#125826,#125827); +#125826 = CARTESIAN_POINT('',(-2.7573,8.52,-1.519993603325)); +#125827 = VECTOR('',#125828,1.); +#125828 = DIRECTION('',(-0.310279535704,0.,-0.950645364857)); +#125829 = ORIENTED_EDGE('',*,*,#125830,.T.); +#125830 = EDGE_CURVE('',#125823,#125831,#125833,.T.); +#125831 = VERTEX_POINT('',#125832); +#125832 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.583823418713)); +#125833 = LINE('',#125834,#125835); +#125834 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.558291506863)); +#125835 = VECTOR('',#125836,1.); +#125836 = DIRECTION('',(0.,0.,-1.)); +#125837 = ORIENTED_EDGE('',*,*,#125838,.T.); +#125838 = EDGE_CURVE('',#125831,#125839,#125841,.T.); +#125839 = VERTEX_POINT('',#125840); +#125840 = CARTESIAN_POINT('',(-2.7573,8.52,-1.622121286488)); +#125841 = LINE('',#125842,#125843); +#125842 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.583823418713)); +#125843 = VECTOR('',#125844,1.); +#125844 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#125845 = ORIENTED_EDGE('',*,*,#125846,.T.); +#125846 = EDGE_CURVE('',#125839,#125847,#125849,.T.); +#125847 = VERTEX_POINT('',#125848); +#125848 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.647653198338)); +#125849 = LINE('',#125850,#125851); +#125850 = CARTESIAN_POINT('',(-2.7573,8.52,-1.622121286488)); +#125851 = VECTOR('',#125852,1.); +#125852 = DIRECTION('',(0.699625005502,0.,-0.714510218035)); +#125853 = ORIENTED_EDGE('',*,*,#125854,.T.); +#125854 = EDGE_CURVE('',#125847,#125855,#125857,.T.); +#125855 = VERTEX_POINT('',#125856); +#125856 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.660419154263)); +#125857 = LINE('',#125858,#125859); +#125858 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.647653198338)); +#125859 = VECTOR('',#125860,1.); +#125860 = DIRECTION('',(0.94664991777,0.,-0.322263763377)); +#125861 = ORIENTED_EDGE('',*,*,#125862,.T.); +#125862 = EDGE_CURVE('',#125855,#125863,#125865,.T.); +#125863 = VERTEX_POINT('',#125864); +#125864 = CARTESIAN_POINT('',(-2.4573,8.52,-1.660419154263)); +#125865 = LINE('',#125866,#125867); +#125866 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.660419154263)); +#125867 = VECTOR('',#125868,1.); +#125868 = DIRECTION('',(1.,0.,0.)); +#125869 = ORIENTED_EDGE('',*,*,#125870,.T.); +#125870 = EDGE_CURVE('',#125863,#125871,#125873,.T.); +#125871 = VERTEX_POINT('',#125872); +#125872 = CARTESIAN_POINT('',(-2.4573,8.52,-1.48169573555)); +#125873 = LINE('',#125874,#125875); +#125874 = CARTESIAN_POINT('',(-2.4573,8.52,-1.660419154263)); +#125875 = VECTOR('',#125876,1.); +#125876 = DIRECTION('',(0.,0.,1.)); +#125877 = ORIENTED_EDGE('',*,*,#125878,.T.); +#125878 = EDGE_CURVE('',#125871,#125805,#125879,.T.); +#125879 = LINE('',#125880,#125881); +#125880 = CARTESIAN_POINT('',(-2.4573,8.52,-1.48169573555)); +#125881 = VECTOR('',#125882,1.); +#125882 = DIRECTION('',(-1.,0.,0.)); +#125883 = FACE_BOUND('',#125884,.T.); +#125884 = EDGE_LOOP('',(#125885,#125895,#125903,#125911,#125919,#125927, + #125935,#125943,#125951,#125959)); +#125885 = ORIENTED_EDGE('',*,*,#125886,.T.); +#125886 = EDGE_CURVE('',#125887,#125889,#125891,.T.); +#125887 = VERTEX_POINT('',#125888); +#125888 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.851908511019)); +#125889 = VERTEX_POINT('',#125890); +#125890 = CARTESIAN_POINT('',(-2.7573,8.52,-1.890206378794)); +#125891 = LINE('',#125892,#125893); +#125892 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.851908511019)); +#125893 = VECTOR('',#125894,1.); +#125894 = DIRECTION('',(0.310279797551,0.,-0.950645279393)); +#125895 = ORIENTED_EDGE('',*,*,#125896,.T.); +#125896 = EDGE_CURVE('',#125889,#125897,#125899,.T.); +#125897 = VERTEX_POINT('',#125898); +#125898 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.915738299584)); +#125899 = LINE('',#125900,#125901); +#125900 = CARTESIAN_POINT('',(-2.7573,8.52,-1.890206378794)); +#125901 = VECTOR('',#125902,1.); +#125902 = DIRECTION('',(0.699624880427,0.,-0.714510340504)); +#125903 = ORIENTED_EDGE('',*,*,#125904,.T.); +#125904 = EDGE_CURVE('',#125897,#125905,#125907,.T.); +#125905 = VERTEX_POINT('',#125906); +#125906 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.928504255509)); +#125907 = LINE('',#125908,#125909); +#125908 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.915738299584)); +#125909 = VECTOR('',#125910,1.); +#125910 = DIRECTION('',(0.94664991777,0.,-0.322263763377)); +#125911 = ORIENTED_EDGE('',*,*,#125912,.T.); +#125912 = EDGE_CURVE('',#125905,#125913,#125915,.T.); +#125913 = VERTEX_POINT('',#125914); +#125914 = CARTESIAN_POINT('',(-2.4573,8.52,-1.928504255509)); +#125915 = LINE('',#125916,#125917); +#125916 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.928504255509)); +#125917 = VECTOR('',#125918,1.); +#125918 = DIRECTION('',(1.,0.,0.)); +#125919 = ORIENTED_EDGE('',*,*,#125920,.T.); +#125920 = EDGE_CURVE('',#125913,#125921,#125923,.T.); +#125921 = VERTEX_POINT('',#125922); +#125922 = CARTESIAN_POINT('',(-2.4573,8.52,-1.737014889812)); +#125923 = LINE('',#125924,#125925); +#125924 = CARTESIAN_POINT('',(-2.4573,8.52,-1.928504255509)); +#125925 = VECTOR('',#125926,1.); +#125926 = DIRECTION('',(0.,0.,1.)); +#125927 = ORIENTED_EDGE('',*,*,#125928,.T.); +#125928 = EDGE_CURVE('',#125921,#125929,#125931,.T.); +#125929 = VERTEX_POINT('',#125930); +#125930 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.737014889812)); +#125931 = LINE('',#125932,#125933); +#125932 = CARTESIAN_POINT('',(-2.4573,8.52,-1.737014889812)); +#125933 = VECTOR('',#125934,1.); +#125934 = DIRECTION('',(-1.,0.,0.)); +#125935 = ORIENTED_EDGE('',*,*,#125936,.T.); +#125936 = EDGE_CURVE('',#125929,#125937,#125939,.T.); +#125937 = VERTEX_POINT('',#125938); +#125938 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.749780845737)); +#125939 = LINE('',#125940,#125941); +#125940 = CARTESIAN_POINT('',(-2.694799988079,8.52,-1.737014889812)); +#125941 = VECTOR('',#125942,1.); +#125942 = DIRECTION('',(-0.94664991777,0.,-0.322263763377)); +#125943 = ORIENTED_EDGE('',*,*,#125944,.T.); +#125944 = EDGE_CURVE('',#125937,#125945,#125947,.T.); +#125945 = VERTEX_POINT('',#125946); +#125946 = CARTESIAN_POINT('',(-2.7573,8.52,-1.775312757587)); +#125947 = LINE('',#125948,#125949); +#125948 = CARTESIAN_POINT('',(-2.732299988079,8.52,-1.749780845737)); +#125949 = VECTOR('',#125950,1.); +#125950 = DIRECTION('',(-0.699625005502,0.,-0.714510218035)); +#125951 = ORIENTED_EDGE('',*,*,#125952,.T.); +#125952 = EDGE_CURVE('',#125945,#125953,#125955,.T.); +#125953 = VERTEX_POINT('',#125954); +#125954 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.813610643244)); +#125955 = LINE('',#125956,#125957); +#125956 = CARTESIAN_POINT('',(-2.7573,8.52,-1.775312757587)); +#125957 = VECTOR('',#125958,1.); +#125958 = DIRECTION('',(-0.310279666627,0.,-0.950645322125)); +#125959 = ORIENTED_EDGE('',*,*,#125960,.T.); +#125960 = EDGE_CURVE('',#125953,#125887,#125961,.T.); +#125961 = LINE('',#125962,#125963); +#125962 = CARTESIAN_POINT('',(-2.769799988079,8.52,-1.813610643244)); +#125963 = VECTOR('',#125964,1.); +#125964 = DIRECTION('',(0.,0.,-1.)); +#125965 = PLANE('',#125966); +#125966 = AXIS2_PLACEMENT_3D('',#125967,#125968,#125969); +#125967 = CARTESIAN_POINT('',(-4.75,8.52,0.)); +#125968 = DIRECTION('',(-0.,1.,0.)); +#125969 = DIRECTION('',(1.,0.,0.)); +#125970 = ADVANCED_FACE('',(#125971),#125987,.T.); +#125971 = FACE_BOUND('',#125972,.T.); +#125972 = EDGE_LOOP('',(#125973,#125979,#125980,#125986)); +#125973 = ORIENTED_EDGE('',*,*,#125974,.T.); +#125974 = EDGE_CURVE('',#123558,#125121,#125975,.T.); +#125975 = LINE('',#125976,#125977); +#125976 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.826376604533)); +#125977 = VECTOR('',#125978,1.); +#125978 = DIRECTION('',(0.,1.,3.330669073876E-14)); +#125979 = ORIENTED_EDGE('',*,*,#125274,.F.); +#125980 = ORIENTED_EDGE('',*,*,#125981,.F.); +#125981 = EDGE_CURVE('',#123414,#125267,#125982,.T.); +#125982 = LINE('',#125983,#125984); +#125983 = CARTESIAN_POINT('',(2.8144,8.5,-1.784248930311)); +#125984 = VECTOR('',#125985,1.); +#125985 = DIRECTION('',(0.,1.,-3.330669073876E-14)); +#125986 = ORIENTED_EDGE('',*,*,#123565,.T.); +#125987 = PLANE('',#125988); +#125988 = AXIS2_PLACEMENT_3D('',#125989,#125990,#125991); +#125989 = CARTESIAN_POINT('',(2.8144,8.5,-1.784248930311)); +#125990 = DIRECTION('',(0.950645322125,0.,-0.310279666627)); +#125991 = DIRECTION('',(0.,-1.,0.)); +#125992 = ADVANCED_FACE('',(#125993),#126004,.T.); +#125993 = FACE_BOUND('',#125994,.T.); +#125994 = EDGE_LOOP('',(#125995,#125996,#125997,#126003)); +#125995 = ORIENTED_EDGE('',*,*,#125981,.T.); +#125996 = ORIENTED_EDGE('',*,*,#125266,.F.); +#125997 = ORIENTED_EDGE('',*,*,#125998,.F.); +#125998 = EDGE_CURVE('',#123412,#125259,#125999,.T.); +#125999 = LINE('',#126000,#126001); +#126000 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.756163827276)); +#126001 = VECTOR('',#126002,1.); +#126002 = DIRECTION('',(-2.220446049251E-14,1.,-1.110223024625E-14)); +#126003 = ORIENTED_EDGE('',*,*,#123411,.T.); +#126004 = PLANE('',#126005); +#126005 = AXIS2_PLACEMENT_3D('',#126006,#126007,#126008); +#126006 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.756163827276)); +#126007 = DIRECTION('',(0.714510218035,0.,-0.699625005502)); +#126008 = DIRECTION('',(0.,-1.,0.)); +#126009 = ADVANCED_FACE('',(#126010),#126021,.T.); +#126010 = FACE_BOUND('',#126011,.T.); +#126011 = EDGE_LOOP('',(#126012,#126013,#126014,#126020)); +#126012 = ORIENTED_EDGE('',*,*,#125998,.T.); +#126013 = ORIENTED_EDGE('',*,*,#125258,.F.); +#126014 = ORIENTED_EDGE('',*,*,#126015,.F.); +#126015 = EDGE_CURVE('',#123422,#125251,#126016,.T.); +#126016 = LINE('',#126017,#126018); +#126017 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.728078724241)); +#126018 = VECTOR('',#126019,1.); +#126019 = DIRECTION('',(0.,1.,0.)); +#126020 = ORIENTED_EDGE('',*,*,#123421,.T.); +#126021 = PLANE('',#126022); +#126022 = AXIS2_PLACEMENT_3D('',#126023,#126024,#126025); +#126023 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.728078724241)); +#126024 = DIRECTION('',(0.562790931242,0.,-0.8265992788)); +#126025 = DIRECTION('',(0.,-1.,0.)); +#126026 = ADVANCED_FACE('',(#126027),#126038,.T.); +#126027 = FACE_BOUND('',#126028,.T.); +#126028 = EDGE_LOOP('',(#126029,#126030,#126031,#126037)); +#126029 = ORIENTED_EDGE('',*,*,#126015,.T.); +#126030 = ORIENTED_EDGE('',*,*,#125250,.F.); +#126031 = ORIENTED_EDGE('',*,*,#126032,.F.); +#126032 = EDGE_CURVE('',#123430,#125243,#126033,.T.); +#126033 = LINE('',#126034,#126035); +#126034 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.714036172724)); +#126035 = VECTOR('',#126036,1.); +#126036 = DIRECTION('',(0.,1.,0.)); +#126037 = ORIENTED_EDGE('',*,*,#123429,.T.); +#126038 = PLANE('',#126039); +#126039 = AXIS2_PLACEMENT_3D('',#126040,#126041,#126042); +#126040 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.714036172724)); +#126041 = DIRECTION('',(0.322263901086,0.,-0.946649870891)); +#126042 = DIRECTION('',(0.,-1.,0.)); +#126043 = ADVANCED_FACE('',(#126044),#126055,.T.); +#126044 = FACE_BOUND('',#126045,.T.); +#126045 = EDGE_LOOP('',(#126046,#126047,#126048,#126054)); +#126046 = ORIENTED_EDGE('',*,*,#126032,.T.); +#126047 = ORIENTED_EDGE('',*,*,#125242,.F.); +#126048 = ORIENTED_EDGE('',*,*,#126049,.F.); +#126049 = EDGE_CURVE('',#123438,#125235,#126050,.T.); +#126050 = LINE('',#126051,#126052); +#126051 = CARTESIAN_POINT('',(3.02065,8.5,-1.714036172724)); +#126052 = VECTOR('',#126053,1.); +#126053 = DIRECTION('',(0.,1.,0.)); +#126054 = ORIENTED_EDGE('',*,*,#123437,.T.); +#126055 = PLANE('',#126056); +#126056 = AXIS2_PLACEMENT_3D('',#126057,#126058,#126059); +#126057 = CARTESIAN_POINT('',(3.02065,8.5,-1.714036172724)); +#126058 = DIRECTION('',(0.,0.,-1.)); +#126059 = DIRECTION('',(0.,-1.,0.)); +#126060 = ADVANCED_FACE('',(#126061),#126072,.T.); +#126061 = FACE_BOUND('',#126062,.T.); +#126062 = EDGE_LOOP('',(#126063,#126064,#126065,#126071)); +#126063 = ORIENTED_EDGE('',*,*,#126049,.T.); +#126064 = ORIENTED_EDGE('',*,*,#125234,.F.); +#126065 = ORIENTED_EDGE('',*,*,#126066,.F.); +#126066 = EDGE_CURVE('',#123446,#125227,#126067,.T.); +#126067 = LINE('',#126068,#126069); +#126068 = CARTESIAN_POINT('',(3.0619,8.5,-1.728078724241)); +#126069 = VECTOR('',#126070,1.); +#126070 = DIRECTION('',(0.,1.,0.)); +#126071 = ORIENTED_EDGE('',*,*,#123445,.T.); +#126072 = PLANE('',#126073); +#126073 = AXIS2_PLACEMENT_3D('',#126074,#126075,#126076); +#126074 = CARTESIAN_POINT('',(3.0619,8.5,-1.728078724241)); +#126075 = DIRECTION('',(-0.322263763377,0.,-0.94664991777)); +#126076 = DIRECTION('',(-0.94664991777,0.,0.322263763377)); +#126077 = ADVANCED_FACE('',(#126078),#126089,.T.); +#126078 = FACE_BOUND('',#126079,.T.); +#126079 = EDGE_LOOP('',(#126080,#126081,#126082,#126088)); +#126080 = ORIENTED_EDGE('',*,*,#126066,.T.); +#126081 = ORIENTED_EDGE('',*,*,#125226,.F.); +#126082 = ORIENTED_EDGE('',*,*,#126083,.F.); +#126083 = EDGE_CURVE('',#123454,#125219,#126084,.T.); +#126084 = LINE('',#126085,#126086); +#126085 = CARTESIAN_POINT('',(3.10315,8.5,-1.756163827276)); +#126086 = VECTOR('',#126087,1.); +#126087 = DIRECTION('',(0.,1.,0.)); +#126088 = ORIENTED_EDGE('',*,*,#123453,.T.); +#126089 = PLANE('',#126090); +#126090 = AXIS2_PLACEMENT_3D('',#126091,#126092,#126093); +#126091 = CARTESIAN_POINT('',(3.10315,8.5,-1.756163827276)); +#126092 = DIRECTION('',(-0.562790931242,0.,-0.8265992788)); +#126093 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#126094 = ADVANCED_FACE('',(#126095),#126106,.T.); +#126095 = FACE_BOUND('',#126096,.T.); +#126096 = EDGE_LOOP('',(#126097,#126098,#126099,#126105)); +#126097 = ORIENTED_EDGE('',*,*,#126083,.T.); +#126098 = ORIENTED_EDGE('',*,*,#125218,.F.); +#126099 = ORIENTED_EDGE('',*,*,#126100,.F.); +#126100 = EDGE_CURVE('',#123462,#125211,#126101,.T.); +#126101 = LINE('',#126102,#126103); +#126102 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.784248930311)); +#126103 = VECTOR('',#126104,1.); +#126104 = DIRECTION('',(0.,1.,-3.330669073876E-14)); +#126105 = ORIENTED_EDGE('',*,*,#123461,.T.); +#126106 = PLANE('',#126107); +#126107 = AXIS2_PLACEMENT_3D('',#126108,#126109,#126110); +#126108 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.784248930311)); +#126109 = DIRECTION('',(-0.71451034311,0.,-0.699624877766)); +#126110 = DIRECTION('',(-0.699624877766,0.,0.71451034311)); +#126111 = ADVANCED_FACE('',(#126112),#126123,.T.); +#126112 = FACE_BOUND('',#126113,.T.); +#126113 = EDGE_LOOP('',(#126114,#126115,#126116,#126122)); +#126114 = ORIENTED_EDGE('',*,*,#126100,.T.); +#126115 = ORIENTED_EDGE('',*,*,#125210,.F.); +#126116 = ORIENTED_EDGE('',*,*,#126117,.F.); +#126117 = EDGE_CURVE('',#123470,#125203,#126118,.T.); +#126118 = LINE('',#126119,#126120); +#126119 = CARTESIAN_POINT('',(3.1444,8.5,-1.826376604533)); +#126120 = VECTOR('',#126121,1.); +#126121 = DIRECTION('',(0.,1.,0.)); +#126122 = ORIENTED_EDGE('',*,*,#123469,.T.); +#126123 = PLANE('',#126124); +#126124 = AXIS2_PLACEMENT_3D('',#126125,#126126,#126127); +#126125 = CARTESIAN_POINT('',(3.1444,8.5,-1.826376604533)); +#126126 = DIRECTION('',(-0.950645256663,0.,-0.310279867191)); +#126127 = DIRECTION('',(-0.310279867191,0.,0.950645256663)); +#126128 = ADVANCED_FACE('',(#126129),#126140,.T.); +#126129 = FACE_BOUND('',#126130,.T.); +#126130 = EDGE_LOOP('',(#126131,#126132,#126133,#126139)); +#126131 = ORIENTED_EDGE('',*,*,#126117,.T.); +#126132 = ORIENTED_EDGE('',*,*,#125202,.F.); +#126133 = ORIENTED_EDGE('',*,*,#126134,.F.); +#126134 = EDGE_CURVE('',#123478,#125195,#126135,.T.); +#126135 = LINE('',#126136,#126137); +#126136 = CARTESIAN_POINT('',(3.1444,8.5,-1.868504259086)); +#126137 = VECTOR('',#126138,1.); +#126138 = DIRECTION('',(0.,1.,0.)); +#126139 = ORIENTED_EDGE('',*,*,#123477,.T.); +#126140 = PLANE('',#126141); +#126141 = AXIS2_PLACEMENT_3D('',#126142,#126143,#126144); +#126142 = CARTESIAN_POINT('',(3.1444,8.5,-1.868504259086)); +#126143 = DIRECTION('',(-1.,0.,0.)); +#126144 = DIRECTION('',(0.,0.,1.)); +#126145 = ADVANCED_FACE('',(#126146),#126157,.T.); +#126146 = FACE_BOUND('',#126147,.T.); +#126147 = EDGE_LOOP('',(#126148,#126149,#126150,#126156)); +#126148 = ORIENTED_EDGE('',*,*,#126134,.T.); +#126149 = ORIENTED_EDGE('',*,*,#125194,.F.); +#126150 = ORIENTED_EDGE('',*,*,#126151,.F.); +#126151 = EDGE_CURVE('',#123486,#125187,#126152,.T.); +#126152 = LINE('',#126153,#126154); +#126153 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.910631913638)); +#126154 = VECTOR('',#126155,1.); +#126155 = DIRECTION('',(0.,1.,0.)); +#126156 = ORIENTED_EDGE('',*,*,#123485,.T.); +#126157 = PLANE('',#126158); +#126158 = AXIS2_PLACEMENT_3D('',#126159,#126160,#126161); +#126159 = CARTESIAN_POINT('',(3.130650003278,8.5,-1.910631913638)); +#126160 = DIRECTION('',(-0.950645213931,0.,0.310279998114)); +#126161 = DIRECTION('',(0.,1.,0.)); +#126162 = ADVANCED_FACE('',(#126163),#126174,.T.); +#126163 = FACE_BOUND('',#126164,.T.); +#126164 = EDGE_LOOP('',(#126165,#126166,#126167,#126173)); +#126165 = ORIENTED_EDGE('',*,*,#126151,.T.); +#126166 = ORIENTED_EDGE('',*,*,#125186,.F.); +#126167 = ORIENTED_EDGE('',*,*,#126168,.F.); +#126168 = EDGE_CURVE('',#123494,#125179,#126169,.T.); +#126169 = LINE('',#126170,#126171); +#126170 = CARTESIAN_POINT('',(3.10315,8.5,-1.952759578025)); +#126171 = VECTOR('',#126172,1.); +#126172 = DIRECTION('',(0.,1.,0.)); +#126173 = ORIENTED_EDGE('',*,*,#123493,.T.); +#126174 = PLANE('',#126175); +#126175 = AXIS2_PLACEMENT_3D('',#126176,#126177,#126178); +#126176 = CARTESIAN_POINT('',(3.10315,8.5,-1.952759578025)); +#126177 = DIRECTION('',(-0.837379149126,0.,0.546622502839)); +#126178 = DIRECTION('',(0.,1.,0.)); +#126179 = ADVANCED_FACE('',(#126180),#126191,.T.); +#126180 = FACE_BOUND('',#126181,.T.); +#126181 = EDGE_LOOP('',(#126182,#126183,#126184,#126190)); +#126182 = ORIENTED_EDGE('',*,*,#126168,.T.); +#126183 = ORIENTED_EDGE('',*,*,#125178,.F.); +#126184 = ORIENTED_EDGE('',*,*,#126185,.F.); +#126185 = EDGE_CURVE('',#123502,#125171,#126186,.T.); +#126186 = LINE('',#126187,#126188); +#126187 = CARTESIAN_POINT('',(3.0619,8.5,-1.98084468106)); +#126188 = VECTOR('',#126189,1.); +#126189 = DIRECTION('',(0.,1.,0.)); +#126190 = ORIENTED_EDGE('',*,*,#123501,.T.); +#126191 = PLANE('',#126192); +#126192 = AXIS2_PLACEMENT_3D('',#126193,#126194,#126195); +#126193 = CARTESIAN_POINT('',(3.0619,8.5,-1.98084468106)); +#126194 = DIRECTION('',(-0.562790931242,0.,0.8265992788)); +#126195 = DIRECTION('',(0.,1.,0.)); +#126196 = ADVANCED_FACE('',(#126197),#126208,.T.); +#126197 = FACE_BOUND('',#126198,.T.); +#126198 = EDGE_LOOP('',(#126199,#126200,#126201,#126207)); +#126199 = ORIENTED_EDGE('',*,*,#126185,.T.); +#126200 = ORIENTED_EDGE('',*,*,#125170,.F.); +#126201 = ORIENTED_EDGE('',*,*,#126202,.F.); +#126202 = EDGE_CURVE('',#123510,#125163,#126203,.T.); +#126203 = LINE('',#126204,#126205); +#126204 = CARTESIAN_POINT('',(3.02065,8.5,-1.994887232578)); +#126205 = VECTOR('',#126206,1.); +#126206 = DIRECTION('',(0.,1.,0.)); +#126207 = ORIENTED_EDGE('',*,*,#123509,.T.); +#126208 = PLANE('',#126209); +#126209 = AXIS2_PLACEMENT_3D('',#126210,#126211,#126212); +#126210 = CARTESIAN_POINT('',(3.02065,8.5,-1.994887232578)); +#126211 = DIRECTION('',(-0.322263763377,0.,0.94664991777)); +#126212 = DIRECTION('',(0.,1.,0.)); +#126213 = ADVANCED_FACE('',(#126214),#126225,.T.); +#126214 = FACE_BOUND('',#126215,.T.); +#126215 = EDGE_LOOP('',(#126216,#126217,#126218,#126224)); +#126216 = ORIENTED_EDGE('',*,*,#126202,.T.); +#126217 = ORIENTED_EDGE('',*,*,#125162,.F.); +#126218 = ORIENTED_EDGE('',*,*,#126219,.F.); +#126219 = EDGE_CURVE('',#123518,#125155,#126220,.T.); +#126220 = LINE('',#126221,#126222); +#126221 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.994887232578)); +#126222 = VECTOR('',#126223,1.); +#126223 = DIRECTION('',(0.,1.,0.)); +#126224 = ORIENTED_EDGE('',*,*,#123517,.T.); +#126225 = PLANE('',#126226); +#126226 = AXIS2_PLACEMENT_3D('',#126227,#126228,#126229); +#126227 = CARTESIAN_POINT('',(2.924399993443,8.5,-1.994887232578)); +#126228 = DIRECTION('',(0.,0.,1.)); +#126229 = DIRECTION('',(1.,0.,-0.)); +#126230 = ADVANCED_FACE('',(#126231),#126242,.T.); +#126231 = FACE_BOUND('',#126232,.T.); +#126232 = EDGE_LOOP('',(#126233,#126234,#126235,#126241)); +#126233 = ORIENTED_EDGE('',*,*,#126219,.T.); +#126234 = ORIENTED_EDGE('',*,*,#125154,.F.); +#126235 = ORIENTED_EDGE('',*,*,#126236,.F.); +#126236 = EDGE_CURVE('',#123526,#125147,#126237,.T.); +#126237 = LINE('',#126238,#126239); +#126238 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.98084468106)); +#126239 = VECTOR('',#126240,1.); +#126240 = DIRECTION('',(0.,1.,0.)); +#126241 = ORIENTED_EDGE('',*,*,#123525,.T.); +#126242 = PLANE('',#126243); +#126243 = AXIS2_PLACEMENT_3D('',#126244,#126245,#126246); +#126244 = CARTESIAN_POINT('',(2.883150013113,8.5,-1.98084468106)); +#126245 = DIRECTION('',(0.322263901086,0.,0.946649870891)); +#126246 = DIRECTION('',(0.,-1.,0.)); +#126247 = ADVANCED_FACE('',(#126248),#126259,.T.); +#126248 = FACE_BOUND('',#126249,.T.); +#126249 = EDGE_LOOP('',(#126250,#126251,#126252,#126258)); +#126250 = ORIENTED_EDGE('',*,*,#126236,.T.); +#126251 = ORIENTED_EDGE('',*,*,#125146,.F.); +#126252 = ORIENTED_EDGE('',*,*,#126253,.F.); +#126253 = EDGE_CURVE('',#123534,#125139,#126254,.T.); +#126254 = LINE('',#126255,#126256); +#126255 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.952759578025)); +#126256 = VECTOR('',#126257,1.); +#126257 = DIRECTION('',(0.,1.,0.)); +#126258 = ORIENTED_EDGE('',*,*,#123533,.T.); +#126259 = PLANE('',#126260); +#126260 = AXIS2_PLACEMENT_3D('',#126261,#126262,#126263); +#126261 = CARTESIAN_POINT('',(2.841900013113,8.5,-1.952759578025)); +#126262 = DIRECTION('',(0.562790931242,0.,0.8265992788)); +#126263 = DIRECTION('',(0.,-1.,0.)); +#126264 = ADVANCED_FACE('',(#126265),#126276,.T.); +#126265 = FACE_BOUND('',#126266,.T.); +#126266 = EDGE_LOOP('',(#126267,#126268,#126269,#126275)); +#126267 = ORIENTED_EDGE('',*,*,#126253,.T.); +#126268 = ORIENTED_EDGE('',*,*,#125138,.F.); +#126269 = ORIENTED_EDGE('',*,*,#126270,.F.); +#126270 = EDGE_CURVE('',#123542,#125131,#126271,.T.); +#126271 = LINE('',#126272,#126273); +#126272 = CARTESIAN_POINT('',(2.8144,8.5,-1.910631913638)); +#126273 = VECTOR('',#126274,1.); +#126274 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126275 = ORIENTED_EDGE('',*,*,#123541,.T.); +#126276 = PLANE('',#126277); +#126277 = AXIS2_PLACEMENT_3D('',#126278,#126279,#126280); +#126278 = CARTESIAN_POINT('',(2.8144,8.5,-1.910631913638)); +#126279 = DIRECTION('',(0.837379059645,0.,0.546622639915)); +#126280 = DIRECTION('',(0.,-1.,0.)); +#126281 = ADVANCED_FACE('',(#126282),#126293,.T.); +#126282 = FACE_BOUND('',#126283,.T.); +#126283 = EDGE_LOOP('',(#126284,#126285,#126286,#126292)); +#126284 = ORIENTED_EDGE('',*,*,#126270,.T.); +#126285 = ORIENTED_EDGE('',*,*,#125130,.F.); +#126286 = ORIENTED_EDGE('',*,*,#126287,.F.); +#126287 = EDGE_CURVE('',#123550,#125123,#126288,.T.); +#126288 = LINE('',#126289,#126290); +#126289 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.868504259086)); +#126290 = VECTOR('',#126291,1.); +#126291 = DIRECTION('',(0.,1.,0.)); +#126292 = ORIENTED_EDGE('',*,*,#123549,.T.); +#126293 = PLANE('',#126294); +#126294 = AXIS2_PLACEMENT_3D('',#126295,#126296,#126297); +#126295 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.868504259086)); +#126296 = DIRECTION('',(0.950645279393,0.,0.310279797551)); +#126297 = DIRECTION('',(0.,-1.,0.)); +#126298 = ADVANCED_FACE('',(#126299),#126305,.T.); +#126299 = FACE_BOUND('',#126300,.T.); +#126300 = EDGE_LOOP('',(#126301,#126302,#126303,#126304)); +#126301 = ORIENTED_EDGE('',*,*,#126287,.T.); +#126302 = ORIENTED_EDGE('',*,*,#125120,.F.); +#126303 = ORIENTED_EDGE('',*,*,#125974,.F.); +#126304 = ORIENTED_EDGE('',*,*,#123557,.T.); +#126305 = PLANE('',#126306); +#126306 = AXIS2_PLACEMENT_3D('',#126307,#126308,#126309); +#126307 = CARTESIAN_POINT('',(2.800650013113,8.5,-1.826376604533)); +#126308 = DIRECTION('',(1.,0.,0.)); +#126309 = DIRECTION('',(-0.,1.,0.)); +#126310 = ADVANCED_FACE('',(#126311),#126327,.T.); +#126311 = FACE_BOUND('',#126312,.T.); +#126312 = EDGE_LOOP('',(#126313,#126319,#126320,#126326)); +#126313 = ORIENTED_EDGE('',*,*,#126314,.T.); +#126314 = EDGE_CURVE('',#123390,#125289,#126315,.T.); +#126315 = LINE('',#126316,#126317); +#126316 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.798291481829)); +#126317 = VECTOR('',#126318,1.); +#126318 = DIRECTION('',(0.,1.,0.)); +#126319 = ORIENTED_EDGE('',*,*,#125490,.F.); +#126320 = ORIENTED_EDGE('',*,*,#126321,.F.); +#126321 = EDGE_CURVE('',#123198,#125483,#126322,.T.); +#126322 = LINE('',#126323,#126324); +#126323 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.671908518171)); +#126324 = VECTOR('',#126325,1.); +#126325 = DIRECTION('',(0.,1.,0.)); +#126326 = ORIENTED_EDGE('',*,*,#123397,.T.); +#126327 = PLANE('',#126328); +#126328 = AXIS2_PLACEMENT_3D('',#126329,#126330,#126331); +#126329 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.671908518171)); +#126330 = DIRECTION('',(1.,0.,0.)); +#126331 = DIRECTION('',(-0.,1.,0.)); +#126332 = ADVANCED_FACE('',(#126333),#126344,.T.); +#126333 = FACE_BOUND('',#126334,.T.); +#126334 = EDGE_LOOP('',(#126335,#126336,#126337,#126343)); +#126335 = ORIENTED_EDGE('',*,*,#126321,.T.); +#126336 = ORIENTED_EDGE('',*,*,#125482,.F.); +#126337 = ORIENTED_EDGE('',*,*,#126338,.F.); +#126338 = EDGE_CURVE('',#123196,#125475,#126339,.T.); +#126339 = LINE('',#126340,#126341); +#126340 = CARTESIAN_POINT('',(2.60815,8.5,-1.601695760584)); +#126341 = VECTOR('',#126342,1.); +#126342 = DIRECTION('',(0.,1.,-2.220446049251E-14)); +#126343 = ORIENTED_EDGE('',*,*,#123195,.T.); +#126344 = PLANE('',#126345); +#126345 = AXIS2_PLACEMENT_3D('',#126346,#126347,#126348); +#126346 = CARTESIAN_POINT('',(2.60815,8.5,-1.601695760584)); +#126347 = DIRECTION('',(0.98135916906,0.,0.192182676904)); +#126348 = DIRECTION('',(0.,-1.,0.)); +#126349 = ADVANCED_FACE('',(#126350),#126361,.T.); +#126350 = FACE_BOUND('',#126351,.T.); +#126351 = EDGE_LOOP('',(#126352,#126353,#126354,#126360)); +#126352 = ORIENTED_EDGE('',*,*,#126338,.T.); +#126353 = ORIENTED_EDGE('',*,*,#125474,.F.); +#126354 = ORIENTED_EDGE('',*,*,#126355,.F.); +#126355 = EDGE_CURVE('',#123206,#125467,#126356,.T.); +#126356 = LINE('',#126357,#126358); +#126357 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.559568066692)); +#126358 = VECTOR('',#126359,1.); +#126359 = DIRECTION('',(2.220446049251E-14,1.,-1.110223024625E-14)); +#126360 = ORIENTED_EDGE('',*,*,#123205,.T.); +#126361 = PLANE('',#126362); +#126362 = AXIS2_PLACEMENT_3D('',#126363,#126364,#126365); +#126363 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.559568066692)); +#126364 = DIRECTION('',(0.950645364857,0.,0.310279535704)); +#126365 = DIRECTION('',(0.,-1.,0.)); +#126366 = ADVANCED_FACE('',(#126367),#126378,.T.); +#126367 = FACE_BOUND('',#126368,.T.); +#126368 = EDGE_LOOP('',(#126369,#126370,#126371,#126377)); +#126369 = ORIENTED_EDGE('',*,*,#126355,.T.); +#126370 = ORIENTED_EDGE('',*,*,#125466,.F.); +#126371 = ORIENTED_EDGE('',*,*,#126372,.F.); +#126372 = EDGE_CURVE('',#123214,#125459,#126373,.T.); +#126373 = LINE('',#126374,#126375); +#126374 = CARTESIAN_POINT('',(2.5669,8.5,-1.503397860622)); +#126375 = VECTOR('',#126376,1.); +#126376 = DIRECTION('',(0.,1.,0.)); +#126377 = ORIENTED_EDGE('',*,*,#123213,.T.); +#126378 = PLANE('',#126379); +#126379 = AXIS2_PLACEMENT_3D('',#126380,#126381,#126382); +#126380 = CARTESIAN_POINT('',(2.5669,8.5,-1.503397860622)); +#126381 = DIRECTION('',(0.898138014367,0.,0.439713664957)); +#126382 = DIRECTION('',(0.,-1.,0.)); +#126383 = ADVANCED_FACE('',(#126384),#126395,.T.); +#126384 = FACE_BOUND('',#126385,.T.); +#126385 = EDGE_LOOP('',(#126386,#126387,#126388,#126394)); +#126386 = ORIENTED_EDGE('',*,*,#126372,.T.); +#126387 = ORIENTED_EDGE('',*,*,#125458,.F.); +#126388 = ORIENTED_EDGE('',*,*,#126389,.F.); +#126389 = EDGE_CURVE('',#123222,#125451,#126390,.T.); +#126390 = LINE('',#126391,#126392); +#126391 = CARTESIAN_POINT('',(2.52565,8.5,-1.46127020607)); +#126392 = VECTOR('',#126393,1.); +#126393 = DIRECTION('',(0.,1.,0.)); +#126394 = ORIENTED_EDGE('',*,*,#123221,.T.); +#126395 = PLANE('',#126396); +#126396 = AXIS2_PLACEMENT_3D('',#126397,#126398,#126399); +#126397 = CARTESIAN_POINT('',(2.52565,8.5,-1.46127020607)); +#126398 = DIRECTION('',(0.714510384802,0.,0.699624835187)); +#126399 = DIRECTION('',(0.,-1.,0.)); +#126400 = ADVANCED_FACE('',(#126401),#126412,.T.); +#126401 = FACE_BOUND('',#126402,.T.); +#126402 = EDGE_LOOP('',(#126403,#126404,#126405,#126411)); +#126403 = ORIENTED_EDGE('',*,*,#126389,.T.); +#126404 = ORIENTED_EDGE('',*,*,#125450,.F.); +#126405 = ORIENTED_EDGE('',*,*,#126406,.F.); +#126406 = EDGE_CURVE('',#123230,#125443,#126407,.T.); +#126407 = LINE('',#126408,#126409); +#126408 = CARTESIAN_POINT('',(2.456900026226,8.5,-1.419142551517)); +#126409 = VECTOR('',#126410,1.); +#126410 = DIRECTION('',(0.,1.,0.)); +#126411 = ORIENTED_EDGE('',*,*,#123229,.T.); +#126412 = PLANE('',#126413); +#126413 = AXIS2_PLACEMENT_3D('',#126414,#126415,#126416); +#126414 = CARTESIAN_POINT('',(2.456900026226,8.5,-1.419142551517)); +#126415 = DIRECTION('',(0.522477073493,0.,0.85265333382)); +#126416 = DIRECTION('',(0.,-1.,0.)); +#126417 = ADVANCED_FACE('',(#126418),#126429,.T.); +#126418 = FACE_BOUND('',#126419,.T.); +#126419 = EDGE_LOOP('',(#126420,#126421,#126422,#126428)); +#126420 = ORIENTED_EDGE('',*,*,#126406,.T.); +#126421 = ORIENTED_EDGE('',*,*,#125442,.F.); +#126422 = ORIENTED_EDGE('',*,*,#126423,.F.); +#126423 = EDGE_CURVE('',#123238,#125435,#126424,.T.); +#126424 = LINE('',#126425,#126426); +#126425 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.4051)); +#126426 = VECTOR('',#126427,1.); +#126427 = DIRECTION('',(0.,1.,0.)); +#126428 = ORIENTED_EDGE('',*,*,#123237,.T.); +#126429 = PLANE('',#126430); +#126430 = AXIS2_PLACEMENT_3D('',#126431,#126432,#126433); +#126431 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.4051)); +#126432 = DIRECTION('',(0.167799328608,0.,0.985821173093)); +#126433 = DIRECTION('',(0.,-1.,0.)); +#126434 = ADVANCED_FACE('',(#126435),#126446,.T.); +#126435 = FACE_BOUND('',#126436,.T.); +#126436 = EDGE_LOOP('',(#126437,#126438,#126439,#126445)); +#126437 = ORIENTED_EDGE('',*,*,#126423,.T.); +#126438 = ORIENTED_EDGE('',*,*,#125434,.F.); +#126439 = ORIENTED_EDGE('',*,*,#126440,.F.); +#126440 = EDGE_CURVE('',#123246,#125427,#126441,.T.); +#126441 = LINE('',#126442,#126443); +#126442 = CARTESIAN_POINT('',(2.291900026226,8.5,-1.419142551517)); +#126443 = VECTOR('',#126444,1.); +#126444 = DIRECTION('',(2.220446049251E-14,1.,0.)); +#126445 = ORIENTED_EDGE('',*,*,#123245,.T.); +#126446 = PLANE('',#126447); +#126447 = AXIS2_PLACEMENT_3D('',#126448,#126449,#126450); +#126448 = CARTESIAN_POINT('',(2.291900026226,8.5,-1.419142551517)); +#126449 = DIRECTION('',(-0.167799328608,0.,0.985821173093)); +#126450 = DIRECTION('',(0.,1.,0.)); +#126451 = ADVANCED_FACE('',(#126452),#126463,.T.); +#126452 = FACE_BOUND('',#126453,.T.); +#126453 = EDGE_LOOP('',(#126454,#126455,#126456,#126462)); +#126454 = ORIENTED_EDGE('',*,*,#126440,.T.); +#126455 = ORIENTED_EDGE('',*,*,#125426,.F.); +#126456 = ORIENTED_EDGE('',*,*,#126457,.F.); +#126457 = EDGE_CURVE('',#123254,#125419,#126458,.T.); +#126458 = LINE('',#126459,#126460); +#126459 = CARTESIAN_POINT('',(2.223149973774,8.5,-1.46127020607)); +#126460 = VECTOR('',#126461,1.); +#126461 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126462 = ORIENTED_EDGE('',*,*,#123253,.T.); +#126463 = PLANE('',#126464); +#126464 = AXIS2_PLACEMENT_3D('',#126465,#126466,#126467); +#126465 = CARTESIAN_POINT('',(2.223149973774,8.5,-1.46127020607)); +#126466 = DIRECTION('',(-0.52247663879,0.,0.852653600191)); +#126467 = DIRECTION('',(0.,1.,0.)); +#126468 = ADVANCED_FACE('',(#126469),#126480,.T.); +#126469 = FACE_BOUND('',#126470,.T.); +#126470 = EDGE_LOOP('',(#126471,#126472,#126473,#126479)); +#126471 = ORIENTED_EDGE('',*,*,#126457,.T.); +#126472 = ORIENTED_EDGE('',*,*,#125418,.F.); +#126473 = ORIENTED_EDGE('',*,*,#126474,.F.); +#126474 = EDGE_CURVE('',#123262,#125411,#126475,.T.); +#126475 = LINE('',#126476,#126477); +#126476 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.503397860622)); +#126477 = VECTOR('',#126478,1.); +#126478 = DIRECTION('',(0.,1.,0.)); +#126479 = ORIENTED_EDGE('',*,*,#123261,.T.); +#126480 = PLANE('',#126481); +#126481 = AXIS2_PLACEMENT_3D('',#126482,#126483,#126484); +#126482 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.503397860622)); +#126483 = DIRECTION('',(-0.714510384802,0.,0.699624835187)); +#126484 = DIRECTION('',(0.,1.,0.)); +#126485 = ADVANCED_FACE('',(#126486),#126497,.T.); +#126486 = FACE_BOUND('',#126487,.T.); +#126487 = EDGE_LOOP('',(#126488,#126489,#126490,#126496)); +#126488 = ORIENTED_EDGE('',*,*,#126474,.T.); +#126489 = ORIENTED_EDGE('',*,*,#125410,.F.); +#126490 = ORIENTED_EDGE('',*,*,#126491,.F.); +#126491 = EDGE_CURVE('',#123270,#125403,#126492,.T.); +#126492 = LINE('',#126493,#126494); +#126493 = CARTESIAN_POINT('',(2.1544,8.5,-1.559568066692)); +#126494 = VECTOR('',#126495,1.); +#126495 = DIRECTION('',(0.,1.,0.)); +#126496 = ORIENTED_EDGE('',*,*,#123269,.T.); +#126497 = PLANE('',#126498); +#126498 = AXIS2_PLACEMENT_3D('',#126499,#126500,#126501); +#126499 = CARTESIAN_POINT('',(2.1544,8.5,-1.559568066692)); +#126500 = DIRECTION('',(-0.898138262779,0.,0.43971315756)); +#126501 = DIRECTION('',(0.,1.,0.)); +#126502 = ADVANCED_FACE('',(#126503),#126514,.T.); +#126503 = FACE_BOUND('',#126504,.T.); +#126504 = EDGE_LOOP('',(#126505,#126506,#126507,#126513)); +#126505 = ORIENTED_EDGE('',*,*,#126491,.T.); +#126506 = ORIENTED_EDGE('',*,*,#125402,.F.); +#126507 = ORIENTED_EDGE('',*,*,#126508,.F.); +#126508 = EDGE_CURVE('',#123278,#125395,#126509,.T.); +#126509 = LINE('',#126510,#126511); +#126510 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.601695760584)); +#126511 = VECTOR('',#126512,1.); +#126512 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126513 = ORIENTED_EDGE('',*,*,#123277,.T.); +#126514 = PLANE('',#126515); +#126515 = AXIS2_PLACEMENT_3D('',#126516,#126517,#126518); +#126516 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.601695760584)); +#126517 = DIRECTION('',(-0.95064510301,0.,0.310280337958)); +#126518 = DIRECTION('',(0.,1.,0.)); +#126519 = ADVANCED_FACE('',(#126520),#126531,.T.); +#126520 = FACE_BOUND('',#126521,.T.); +#126521 = EDGE_LOOP('',(#126522,#126523,#126524,#126530)); +#126522 = ORIENTED_EDGE('',*,*,#126508,.T.); +#126523 = ORIENTED_EDGE('',*,*,#125394,.F.); +#126524 = ORIENTED_EDGE('',*,*,#126525,.F.); +#126525 = EDGE_CURVE('',#123286,#125387,#126526,.T.); +#126526 = LINE('',#126527,#126528); +#126527 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.671908518171)); +#126528 = VECTOR('',#126529,1.); +#126529 = DIRECTION('',(0.,1.,0.)); +#126530 = ORIENTED_EDGE('',*,*,#123285,.T.); +#126531 = PLANE('',#126532); +#126532 = AXIS2_PLACEMENT_3D('',#126533,#126534,#126535); +#126533 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.671908518171)); +#126534 = DIRECTION('',(-0.98135927276,0.,0.192182147373)); +#126535 = DIRECTION('',(0.,1.,0.)); +#126536 = ADVANCED_FACE('',(#126537),#126548,.T.); +#126537 = FACE_BOUND('',#126538,.T.); +#126538 = EDGE_LOOP('',(#126539,#126540,#126541,#126547)); +#126539 = ORIENTED_EDGE('',*,*,#126525,.T.); +#126540 = ORIENTED_EDGE('',*,*,#125386,.F.); +#126541 = ORIENTED_EDGE('',*,*,#126542,.F.); +#126542 = EDGE_CURVE('',#123294,#125379,#126543,.T.); +#126543 = LINE('',#126544,#126545); +#126544 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.798291481829)); +#126545 = VECTOR('',#126546,1.); +#126546 = DIRECTION('',(0.,1.,0.)); +#126547 = ORIENTED_EDGE('',*,*,#123293,.T.); +#126548 = PLANE('',#126549); +#126549 = AXIS2_PLACEMENT_3D('',#126550,#126551,#126552); +#126550 = CARTESIAN_POINT('',(2.126900026226,8.5,-1.798291481829)); +#126551 = DIRECTION('',(-1.,0.,0.)); +#126552 = DIRECTION('',(0.,0.,1.)); +#126553 = ADVANCED_FACE('',(#126554),#126565,.T.); +#126554 = FACE_BOUND('',#126555,.T.); +#126555 = EDGE_LOOP('',(#126556,#126557,#126558,#126564)); +#126556 = ORIENTED_EDGE('',*,*,#126542,.T.); +#126557 = ORIENTED_EDGE('',*,*,#125378,.F.); +#126558 = ORIENTED_EDGE('',*,*,#126559,.F.); +#126559 = EDGE_CURVE('',#123302,#125371,#126560,.T.); +#126560 = LINE('',#126561,#126562); +#126561 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.868504259086)); +#126562 = VECTOR('',#126563,1.); +#126563 = DIRECTION('',(0.,1.,0.)); +#126564 = ORIENTED_EDGE('',*,*,#123301,.T.); +#126565 = PLANE('',#126566); +#126566 = AXIS2_PLACEMENT_3D('',#126567,#126568,#126569); +#126567 = CARTESIAN_POINT('',(2.140649973774,8.5,-1.868504259086)); +#126568 = DIRECTION('',(-0.981359282913,0.,-0.192182095523)); +#126569 = DIRECTION('',(-0.192182095523,0.,0.981359282913)); +#126570 = ADVANCED_FACE('',(#126571),#126582,.T.); +#126571 = FACE_BOUND('',#126572,.T.); +#126572 = EDGE_LOOP('',(#126573,#126574,#126575,#126581)); +#126573 = ORIENTED_EDGE('',*,*,#126559,.T.); +#126574 = ORIENTED_EDGE('',*,*,#125370,.F.); +#126575 = ORIENTED_EDGE('',*,*,#126576,.F.); +#126576 = EDGE_CURVE('',#123310,#125363,#126577,.T.); +#126577 = LINE('',#126578,#126579); +#126578 = CARTESIAN_POINT('',(2.1544,8.5,-1.910631913638)); +#126579 = VECTOR('',#126580,1.); +#126580 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126581 = ORIENTED_EDGE('',*,*,#123309,.T.); +#126582 = PLANE('',#126583); +#126583 = AXIS2_PLACEMENT_3D('',#126584,#126585,#126586); +#126584 = CARTESIAN_POINT('',(2.1544,8.5,-1.910631913638)); +#126585 = DIRECTION('',(-0.950645017546,0.,-0.310280599805)); +#126586 = DIRECTION('',(-0.310280599805,0.,0.950645017546)); +#126587 = ADVANCED_FACE('',(#126588),#126599,.T.); +#126588 = FACE_BOUND('',#126589,.T.); +#126589 = EDGE_LOOP('',(#126590,#126591,#126592,#126598)); +#126590 = ORIENTED_EDGE('',*,*,#126576,.T.); +#126591 = ORIENTED_EDGE('',*,*,#125362,.F.); +#126592 = ORIENTED_EDGE('',*,*,#126593,.F.); +#126593 = EDGE_CURVE('',#123318,#125355,#126594,.T.); +#126594 = LINE('',#126595,#126596); +#126595 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.966802129543)); +#126596 = VECTOR('',#126597,1.); +#126597 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126598 = ORIENTED_EDGE('',*,*,#123317,.T.); +#126599 = PLANE('',#126600); +#126600 = AXIS2_PLACEMENT_3D('',#126601,#126602,#126603); +#126601 = CARTESIAN_POINT('',(2.181899973774,8.5,-1.966802129543)); +#126602 = DIRECTION('',(-0.898138293184,0.,-0.439713095457)); +#126603 = DIRECTION('',(-0.439713095457,0.,0.898138293184)); +#126604 = ADVANCED_FACE('',(#126605),#126616,.T.); +#126605 = FACE_BOUND('',#126606,.T.); +#126606 = EDGE_LOOP('',(#126607,#126608,#126609,#126615)); +#126607 = ORIENTED_EDGE('',*,*,#126593,.T.); +#126608 = ORIENTED_EDGE('',*,*,#125354,.F.); +#126609 = ORIENTED_EDGE('',*,*,#126610,.F.); +#126610 = EDGE_CURVE('',#123326,#125347,#126611,.T.); +#126611 = LINE('',#126612,#126613); +#126612 = CARTESIAN_POINT('',(2.223149973774,8.5,-2.008929789013)); +#126613 = VECTOR('',#126614,1.); +#126614 = DIRECTION('',(0.,1.,0.)); +#126615 = ORIENTED_EDGE('',*,*,#123325,.T.); +#126616 = PLANE('',#126617); +#126617 = AXIS2_PLACEMENT_3D('',#126618,#126619,#126620); +#126618 = CARTESIAN_POINT('',(2.223149973774,8.5,-2.008929789013)); +#126619 = DIRECTION('',(-0.714510425625,0.,-0.699624793495)); +#126620 = DIRECTION('',(-0.699624793495,0.,0.714510425625)); +#126621 = ADVANCED_FACE('',(#126622),#126633,.T.); +#126622 = FACE_BOUND('',#126623,.T.); +#126623 = EDGE_LOOP('',(#126624,#126625,#126626,#126632)); +#126624 = ORIENTED_EDGE('',*,*,#126610,.T.); +#126625 = ORIENTED_EDGE('',*,*,#125346,.F.); +#126626 = ORIENTED_EDGE('',*,*,#126627,.F.); +#126627 = EDGE_CURVE('',#123334,#125339,#126628,.T.); +#126628 = LINE('',#126629,#126630); +#126629 = CARTESIAN_POINT('',(2.291900026226,8.5,-2.051057447253)); +#126630 = VECTOR('',#126631,1.); +#126631 = DIRECTION('',(0.,1.,0.)); +#126632 = ORIENTED_EDGE('',*,*,#123333,.T.); +#126633 = PLANE('',#126634); +#126634 = AXIS2_PLACEMENT_3D('',#126635,#126636,#126637); +#126635 = CARTESIAN_POINT('',(2.291900026226,8.5,-2.051057447253)); +#126636 = DIRECTION('',(-0.522476672043,0.,-0.852653579815)); +#126637 = DIRECTION('',(-0.852653579815,0.,0.522476672043)); +#126638 = ADVANCED_FACE('',(#126639),#126650,.T.); +#126639 = FACE_BOUND('',#126640,.T.); +#126640 = EDGE_LOOP('',(#126641,#126642,#126643,#126649)); +#126641 = ORIENTED_EDGE('',*,*,#126627,.T.); +#126642 = ORIENTED_EDGE('',*,*,#125338,.F.); +#126643 = ORIENTED_EDGE('',*,*,#126644,.F.); +#126644 = EDGE_CURVE('',#123342,#125331,#126645,.T.); +#126645 = LINE('',#126646,#126647); +#126646 = CARTESIAN_POINT('',(2.374400026226,8.5,-2.0651)); +#126647 = VECTOR('',#126648,1.); +#126648 = DIRECTION('',(0.,1.,0.)); +#126649 = ORIENTED_EDGE('',*,*,#123341,.T.); +#126650 = PLANE('',#126651); +#126651 = AXIS2_PLACEMENT_3D('',#126652,#126653,#126654); +#126652 = CARTESIAN_POINT('',(2.374400026226,8.5,-2.0651)); +#126653 = DIRECTION('',(-0.167799342885,0.,-0.985821170663)); +#126654 = DIRECTION('',(-0.985821170663,0.,0.167799342885)); +#126655 = ADVANCED_FACE('',(#126656),#126667,.T.); +#126656 = FACE_BOUND('',#126657,.T.); +#126657 = EDGE_LOOP('',(#126658,#126659,#126660,#126666)); +#126658 = ORIENTED_EDGE('',*,*,#126644,.T.); +#126659 = ORIENTED_EDGE('',*,*,#125330,.F.); +#126660 = ORIENTED_EDGE('',*,*,#126661,.F.); +#126661 = EDGE_CURVE('',#123350,#125323,#126662,.T.); +#126662 = LINE('',#126663,#126664); +#126663 = CARTESIAN_POINT('',(2.456900026226,8.5,-2.051057447253)); +#126664 = VECTOR('',#126665,1.); +#126665 = DIRECTION('',(0.,1.,0.)); +#126666 = ORIENTED_EDGE('',*,*,#123349,.T.); +#126667 = PLANE('',#126668); +#126668 = AXIS2_PLACEMENT_3D('',#126669,#126670,#126671); +#126669 = CARTESIAN_POINT('',(2.456900026226,8.5,-2.051057447253)); +#126670 = DIRECTION('',(0.167799342885,0.,-0.985821170663)); +#126671 = DIRECTION('',(0.,-1.,0.)); +#126672 = ADVANCED_FACE('',(#126673),#126684,.T.); +#126673 = FACE_BOUND('',#126674,.T.); +#126674 = EDGE_LOOP('',(#126675,#126676,#126677,#126683)); +#126675 = ORIENTED_EDGE('',*,*,#126661,.T.); +#126676 = ORIENTED_EDGE('',*,*,#125322,.F.); +#126677 = ORIENTED_EDGE('',*,*,#126678,.F.); +#126678 = EDGE_CURVE('',#123358,#125315,#126679,.T.); +#126679 = LINE('',#126680,#126681); +#126680 = CARTESIAN_POINT('',(2.52565,8.5,-2.008929789013)); +#126681 = VECTOR('',#126682,1.); +#126682 = DIRECTION('',(0.,1.,-2.220446049251E-14)); +#126683 = ORIENTED_EDGE('',*,*,#123357,.T.); +#126684 = PLANE('',#126685); +#126685 = AXIS2_PLACEMENT_3D('',#126686,#126687,#126688); +#126686 = CARTESIAN_POINT('',(2.52565,8.5,-2.008929789013)); +#126687 = DIRECTION('',(0.522477106747,0.,-0.852653313443)); +#126688 = DIRECTION('',(0.,-1.,0.)); +#126689 = ADVANCED_FACE('',(#126690),#126701,.T.); +#126690 = FACE_BOUND('',#126691,.T.); +#126691 = EDGE_LOOP('',(#126692,#126693,#126694,#126700)); +#126692 = ORIENTED_EDGE('',*,*,#126678,.T.); +#126693 = ORIENTED_EDGE('',*,*,#125314,.F.); +#126694 = ORIENTED_EDGE('',*,*,#126695,.F.); +#126695 = EDGE_CURVE('',#123366,#125307,#126696,.T.); +#126696 = LINE('',#126697,#126698); +#126697 = CARTESIAN_POINT('',(2.5669,8.5,-1.966802129543)); +#126698 = VECTOR('',#126699,1.); +#126699 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#126700 = ORIENTED_EDGE('',*,*,#123365,.T.); +#126701 = PLANE('',#126702); +#126702 = AXIS2_PLACEMENT_3D('',#126703,#126704,#126705); +#126703 = CARTESIAN_POINT('',(2.5669,8.5,-1.966802129543)); +#126704 = DIRECTION('',(0.714510425625,0.,-0.699624793495)); +#126705 = DIRECTION('',(0.,-1.,0.)); +#126706 = ADVANCED_FACE('',(#126707),#126718,.T.); +#126707 = FACE_BOUND('',#126708,.T.); +#126708 = EDGE_LOOP('',(#126709,#126710,#126711,#126717)); +#126709 = ORIENTED_EDGE('',*,*,#126695,.T.); +#126710 = ORIENTED_EDGE('',*,*,#125306,.F.); +#126711 = ORIENTED_EDGE('',*,*,#126712,.F.); +#126712 = EDGE_CURVE('',#123374,#125299,#126713,.T.); +#126713 = LINE('',#126714,#126715); +#126714 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.910631913638)); +#126715 = VECTOR('',#126716,1.); +#126716 = DIRECTION('',(2.220446049251E-14,1.,1.110223024625E-14)); +#126717 = ORIENTED_EDGE('',*,*,#123373,.T.); +#126718 = PLANE('',#126719); +#126719 = AXIS2_PLACEMENT_3D('',#126720,#126721,#126722); +#126720 = CARTESIAN_POINT('',(2.594400013113,8.5,-1.910631913638)); +#126721 = DIRECTION('',(0.898138044771,0.,-0.439713602853)); +#126722 = DIRECTION('',(0.,-1.,0.)); +#126723 = ADVANCED_FACE('',(#126724),#126735,.T.); +#126724 = FACE_BOUND('',#126725,.T.); +#126725 = EDGE_LOOP('',(#126726,#126727,#126728,#126734)); +#126726 = ORIENTED_EDGE('',*,*,#126712,.T.); +#126727 = ORIENTED_EDGE('',*,*,#125298,.F.); +#126728 = ORIENTED_EDGE('',*,*,#126729,.F.); +#126729 = EDGE_CURVE('',#123382,#125291,#126730,.T.); +#126730 = LINE('',#126731,#126732); +#126731 = CARTESIAN_POINT('',(2.60815,8.5,-1.868504259086)); +#126732 = VECTOR('',#126733,1.); +#126733 = DIRECTION('',(0.,1.,0.)); +#126734 = ORIENTED_EDGE('',*,*,#123381,.T.); +#126735 = PLANE('',#126736); +#126736 = AXIS2_PLACEMENT_3D('',#126737,#126738,#126739); +#126737 = CARTESIAN_POINT('',(2.60815,8.5,-1.868504259086)); +#126738 = DIRECTION('',(0.950645279393,0.,-0.310279797551)); +#126739 = DIRECTION('',(0.,-1.,0.)); +#126740 = ADVANCED_FACE('',(#126741),#126747,.T.); +#126741 = FACE_BOUND('',#126742,.T.); +#126742 = EDGE_LOOP('',(#126743,#126744,#126745,#126746)); +#126743 = ORIENTED_EDGE('',*,*,#126729,.T.); +#126744 = ORIENTED_EDGE('',*,*,#125288,.F.); +#126745 = ORIENTED_EDGE('',*,*,#126314,.F.); +#126746 = ORIENTED_EDGE('',*,*,#123389,.T.); +#126747 = PLANE('',#126748); +#126748 = AXIS2_PLACEMENT_3D('',#126749,#126750,#126751); +#126749 = CARTESIAN_POINT('',(2.621899986887,8.5,-1.798291481829)); +#126750 = DIRECTION('',(0.981359179214,0.,-0.192182625054)); +#126751 = DIRECTION('',(0.,-1.,0.)); +#126752 = ADVANCED_FACE('',(#126753),#126769,.T.); +#126753 = FACE_BOUND('',#126754,.T.); +#126754 = EDGE_LOOP('',(#126755,#126761,#126762,#126768)); +#126755 = ORIENTED_EDGE('',*,*,#126756,.T.); +#126756 = EDGE_CURVE('',#123710,#125499,#126757,.T.); +#126757 = LINE('',#126758,#126759); +#126758 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.601695760584)); +#126759 = VECTOR('',#126760,1.); +#126760 = DIRECTION('',(0.,1.,0.)); +#126761 = ORIENTED_EDGE('',*,*,#125636,.F.); +#126762 = ORIENTED_EDGE('',*,*,#126763,.F.); +#126763 = EDGE_CURVE('',#123582,#125629,#126764,.T.); +#126764 = LINE('',#126765,#126766); +#126765 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.685951069689)); +#126766 = VECTOR('',#126767,1.); +#126767 = DIRECTION('',(0.,1.,0.)); +#126768 = ORIENTED_EDGE('',*,*,#123717,.T.); +#126769 = PLANE('',#126770); +#126770 = AXIS2_PLACEMENT_3D('',#126771,#126772,#126773); +#126771 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.685951069689)); +#126772 = DIRECTION('',(-0.986944094789,0.,-0.161063198037)); +#126773 = DIRECTION('',(-0.161063198037,0.,0.986944094789)); +#126774 = ADVANCED_FACE('',(#126775),#126786,.T.); +#126775 = FACE_BOUND('',#126776,.T.); +#126776 = EDGE_LOOP('',(#126777,#126778,#126779,#126785)); +#126777 = ORIENTED_EDGE('',*,*,#126763,.T.); +#126778 = ORIENTED_EDGE('',*,*,#125628,.F.); +#126779 = ORIENTED_EDGE('',*,*,#126780,.F.); +#126780 = EDGE_CURVE('',#123580,#125621,#126781,.T.); +#126781 = LINE('',#126782,#126783); +#126782 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.784248930311)); +#126783 = VECTOR('',#126784,1.); +#126784 = DIRECTION('',(0.,1.,0.)); +#126785 = ORIENTED_EDGE('',*,*,#123579,.T.); +#126786 = PLANE('',#126787); +#126787 = AXIS2_PLACEMENT_3D('',#126788,#126789,#126790); +#126788 = CARTESIAN_POINT('',(2.553149973774,8.5,-1.784248930311)); +#126789 = DIRECTION('',(-1.,0.,0.)); +#126790 = DIRECTION('',(0.,0.,1.)); +#126791 = ADVANCED_FACE('',(#126792),#126803,.T.); +#126792 = FACE_BOUND('',#126793,.T.); +#126793 = EDGE_LOOP('',(#126794,#126795,#126796,#126802)); +#126794 = ORIENTED_EDGE('',*,*,#126780,.T.); +#126795 = ORIENTED_EDGE('',*,*,#125620,.F.); +#126796 = ORIENTED_EDGE('',*,*,#126797,.F.); +#126797 = EDGE_CURVE('',#123590,#125613,#126798,.T.); +#126798 = LINE('',#126799,#126800); +#126799 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.868504259086)); +#126800 = VECTOR('',#126801,1.); +#126801 = DIRECTION('',(0.,1.,0.)); +#126802 = ORIENTED_EDGE('',*,*,#123589,.T.); +#126803 = PLANE('',#126804); +#126804 = AXIS2_PLACEMENT_3D('',#126805,#126806,#126807); +#126805 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.868504259086)); +#126806 = DIRECTION('',(-0.986944100766,0.,0.161063161412)); +#126807 = DIRECTION('',(0.,1.,0.)); +#126808 = ADVANCED_FACE('',(#126809),#126820,.T.); +#126809 = FACE_BOUND('',#126810,.T.); +#126810 = EDGE_LOOP('',(#126811,#126812,#126813,#126819)); +#126811 = ORIENTED_EDGE('',*,*,#126797,.T.); +#126812 = ORIENTED_EDGE('',*,*,#125612,.F.); +#126813 = ORIENTED_EDGE('',*,*,#126814,.F.); +#126814 = EDGE_CURVE('',#123598,#125605,#126815,.T.); +#126815 = LINE('',#126816,#126817); +#126816 = CARTESIAN_POINT('',(2.4844,8.5,-1.952759578025)); +#126817 = VECTOR('',#126818,1.); +#126818 = DIRECTION('',(0.,1.,0.)); +#126819 = ORIENTED_EDGE('',*,*,#123597,.T.); +#126820 = PLANE('',#126821); +#126821 = AXIS2_PLACEMENT_3D('',#126822,#126823,#126824); +#126822 = CARTESIAN_POINT('',(2.4844,8.5,-1.952759578025)); +#126823 = DIRECTION('',(-0.83737903044,0.,0.546622684656)); +#126824 = DIRECTION('',(0.,1.,0.)); +#126825 = ADVANCED_FACE('',(#126826),#126837,.T.); +#126826 = FACE_BOUND('',#126827,.T.); +#126827 = EDGE_LOOP('',(#126828,#126829,#126830,#126836)); +#126828 = ORIENTED_EDGE('',*,*,#126814,.T.); +#126829 = ORIENTED_EDGE('',*,*,#125604,.F.); +#126830 = ORIENTED_EDGE('',*,*,#126831,.F.); +#126831 = EDGE_CURVE('',#123606,#125597,#126832,.T.); +#126832 = LINE('',#126833,#126834); +#126833 = CARTESIAN_POINT('',(2.44315,8.5,-1.98084468106)); +#126834 = VECTOR('',#126835,1.); +#126835 = DIRECTION('',(0.,1.,0.)); +#126836 = ORIENTED_EDGE('',*,*,#123605,.T.); +#126837 = PLANE('',#126838); +#126838 = AXIS2_PLACEMENT_3D('',#126839,#126840,#126841); +#126839 = CARTESIAN_POINT('',(2.44315,8.5,-1.98084468106)); +#126840 = DIRECTION('',(-0.562790931242,0.,0.8265992788)); +#126841 = DIRECTION('',(0.,1.,0.)); +#126842 = ADVANCED_FACE('',(#126843),#126854,.T.); +#126843 = FACE_BOUND('',#126844,.T.); +#126844 = EDGE_LOOP('',(#126845,#126846,#126847,#126853)); +#126845 = ORIENTED_EDGE('',*,*,#126831,.T.); +#126846 = ORIENTED_EDGE('',*,*,#125596,.F.); +#126847 = ORIENTED_EDGE('',*,*,#126848,.F.); +#126848 = EDGE_CURVE('',#123614,#125589,#126849,.T.); +#126849 = LINE('',#126850,#126851); +#126850 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.994887232578)); +#126851 = VECTOR('',#126852,1.); +#126852 = DIRECTION('',(0.,1.,0.)); +#126853 = ORIENTED_EDGE('',*,*,#123613,.T.); +#126854 = PLANE('',#126855); +#126855 = AXIS2_PLACEMENT_3D('',#126856,#126857,#126858); +#126856 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.994887232578)); +#126857 = DIRECTION('',(-0.200123428343,0.,0.97977069431)); +#126858 = DIRECTION('',(0.,1.,0.)); +#126859 = ADVANCED_FACE('',(#126860),#126871,.T.); +#126860 = FACE_BOUND('',#126861,.T.); +#126861 = EDGE_LOOP('',(#126862,#126863,#126864,#126870)); +#126862 = ORIENTED_EDGE('',*,*,#126848,.T.); +#126863 = ORIENTED_EDGE('',*,*,#125588,.F.); +#126864 = ORIENTED_EDGE('',*,*,#126865,.F.); +#126865 = EDGE_CURVE('',#123622,#125581,#126866,.T.); +#126866 = LINE('',#126867,#126868); +#126867 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.98084468106)); +#126868 = VECTOR('',#126869,1.); +#126869 = DIRECTION('',(0.,1.,0.)); +#126870 = ORIENTED_EDGE('',*,*,#123621,.T.); +#126871 = PLANE('',#126872); +#126872 = AXIS2_PLACEMENT_3D('',#126873,#126874,#126875); +#126873 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.98084468106)); +#126874 = DIRECTION('',(0.200123208493,0.,0.979770739215)); +#126875 = DIRECTION('',(0.,-1.,0.)); +#126876 = ADVANCED_FACE('',(#126877),#126888,.T.); +#126877 = FACE_BOUND('',#126878,.T.); +#126878 = EDGE_LOOP('',(#126879,#126880,#126881,#126887)); +#126879 = ORIENTED_EDGE('',*,*,#126865,.T.); +#126880 = ORIENTED_EDGE('',*,*,#125580,.F.); +#126881 = ORIENTED_EDGE('',*,*,#126882,.F.); +#126882 = EDGE_CURVE('',#123630,#125573,#126883,.T.); +#126883 = LINE('',#126884,#126885); +#126884 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.952759578025)); +#126885 = VECTOR('',#126886,1.); +#126886 = DIRECTION('',(0.,1.,0.)); +#126887 = ORIENTED_EDGE('',*,*,#123629,.T.); +#126888 = PLANE('',#126889); +#126889 = AXIS2_PLACEMENT_3D('',#126890,#126891,#126892); +#126890 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.952759578025)); +#126891 = DIRECTION('',(0.562790931242,0.,0.8265992788)); +#126892 = DIRECTION('',(0.,-1.,0.)); +#126893 = ADVANCED_FACE('',(#126894),#126905,.T.); +#126894 = FACE_BOUND('',#126895,.T.); +#126895 = EDGE_LOOP('',(#126896,#126897,#126898,#126904)); +#126896 = ORIENTED_EDGE('',*,*,#126882,.T.); +#126897 = ORIENTED_EDGE('',*,*,#125572,.F.); +#126898 = ORIENTED_EDGE('',*,*,#126899,.F.); +#126899 = EDGE_CURVE('',#123638,#125565,#126900,.T.); +#126900 = LINE('',#126901,#126902); +#126901 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.868504259086)); +#126902 = VECTOR('',#126903,1.); +#126903 = DIRECTION('',(0.,1.,0.)); +#126904 = ORIENTED_EDGE('',*,*,#123637,.T.); +#126905 = PLANE('',#126906); +#126906 = AXIS2_PLACEMENT_3D('',#126907,#126908,#126909); +#126907 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.868504259086)); +#126908 = DIRECTION('',(0.837379388362,0.,0.546622136349)); +#126909 = DIRECTION('',(0.,-1.,0.)); +#126910 = ADVANCED_FACE('',(#126911),#126922,.T.); +#126911 = FACE_BOUND('',#126912,.T.); +#126912 = EDGE_LOOP('',(#126913,#126914,#126915,#126921)); +#126913 = ORIENTED_EDGE('',*,*,#126899,.T.); +#126914 = ORIENTED_EDGE('',*,*,#125564,.F.); +#126915 = ORIENTED_EDGE('',*,*,#126916,.F.); +#126916 = EDGE_CURVE('',#123646,#125557,#126917,.T.); +#126917 = LINE('',#126918,#126919); +#126918 = CARTESIAN_POINT('',(2.19565,8.5,-1.784248930311)); +#126919 = VECTOR('',#126920,1.); +#126920 = DIRECTION('',(0.,1.,0.)); +#126921 = ORIENTED_EDGE('',*,*,#123645,.T.); +#126922 = PLANE('',#126923); +#126923 = AXIS2_PLACEMENT_3D('',#126924,#126925,#126926); +#126924 = CARTESIAN_POINT('',(2.19565,8.5,-1.784248930311)); +#126925 = DIRECTION('',(0.986943954265,0.,0.161064059119)); +#126926 = DIRECTION('',(0.,-1.,0.)); +#126927 = ADVANCED_FACE('',(#126928),#126939,.T.); +#126928 = FACE_BOUND('',#126929,.T.); +#126929 = EDGE_LOOP('',(#126930,#126931,#126932,#126938)); +#126930 = ORIENTED_EDGE('',*,*,#126916,.T.); +#126931 = ORIENTED_EDGE('',*,*,#125556,.F.); +#126932 = ORIENTED_EDGE('',*,*,#126933,.F.); +#126933 = EDGE_CURVE('',#123654,#125549,#126934,.T.); +#126934 = LINE('',#126935,#126936); +#126935 = CARTESIAN_POINT('',(2.19565,8.5,-1.685951069689)); +#126936 = VECTOR('',#126937,1.); +#126937 = DIRECTION('',(0.,1.,0.)); +#126938 = ORIENTED_EDGE('',*,*,#123653,.T.); +#126939 = PLANE('',#126940); +#126940 = AXIS2_PLACEMENT_3D('',#126941,#126942,#126943); +#126941 = CARTESIAN_POINT('',(2.19565,8.5,-1.685951069689)); +#126942 = DIRECTION('',(1.,0.,0.)); +#126943 = DIRECTION('',(-0.,1.,0.)); +#126944 = ADVANCED_FACE('',(#126945),#126956,.T.); +#126945 = FACE_BOUND('',#126946,.T.); +#126946 = EDGE_LOOP('',(#126947,#126948,#126949,#126955)); +#126947 = ORIENTED_EDGE('',*,*,#126933,.T.); +#126948 = ORIENTED_EDGE('',*,*,#125548,.F.); +#126949 = ORIENTED_EDGE('',*,*,#126950,.F.); +#126950 = EDGE_CURVE('',#123662,#125541,#126951,.T.); +#126951 = LINE('',#126952,#126953); +#126952 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.601695760584)); +#126953 = VECTOR('',#126954,1.); +#126954 = DIRECTION('',(0.,1.,0.)); +#126955 = ORIENTED_EDGE('',*,*,#123661,.T.); +#126956 = PLANE('',#126957); +#126957 = AXIS2_PLACEMENT_3D('',#126958,#126959,#126960); +#126958 = CARTESIAN_POINT('',(2.209400026226,8.5,-1.601695760584)); +#126959 = DIRECTION('',(0.986943948288,0.,-0.161064095744)); +#126960 = DIRECTION('',(0.,-1.,0.)); +#126961 = ADVANCED_FACE('',(#126962),#126973,.T.); +#126962 = FACE_BOUND('',#126963,.T.); +#126963 = EDGE_LOOP('',(#126964,#126965,#126966,#126972)); +#126964 = ORIENTED_EDGE('',*,*,#126950,.T.); +#126965 = ORIENTED_EDGE('',*,*,#125540,.F.); +#126966 = ORIENTED_EDGE('',*,*,#126967,.F.); +#126967 = EDGE_CURVE('',#123670,#125533,#126968,.T.); +#126968 = LINE('',#126969,#126970); +#126969 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.51744041214)); +#126970 = VECTOR('',#126971,1.); +#126971 = DIRECTION('',(0.,1.,0.)); +#126972 = ORIENTED_EDGE('',*,*,#123669,.T.); +#126973 = PLANE('',#126974); +#126974 = AXIS2_PLACEMENT_3D('',#126975,#126976,#126977); +#126975 = CARTESIAN_POINT('',(2.264399973774,8.5,-1.51744041214)); +#126976 = DIRECTION('',(0.837379475978,0.,-0.546622002129)); +#126977 = DIRECTION('',(0.,-1.,0.)); +#126978 = ADVANCED_FACE('',(#126979),#126990,.T.); +#126979 = FACE_BOUND('',#126980,.T.); +#126980 = EDGE_LOOP('',(#126981,#126982,#126983,#126989)); +#126981 = ORIENTED_EDGE('',*,*,#126967,.T.); +#126982 = ORIENTED_EDGE('',*,*,#125532,.F.); +#126983 = ORIENTED_EDGE('',*,*,#126984,.F.); +#126984 = EDGE_CURVE('',#123678,#125525,#126985,.T.); +#126985 = LINE('',#126986,#126987); +#126986 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.489355309105)); +#126987 = VECTOR('',#126988,1.); +#126988 = DIRECTION('',(0.,1.,0.)); +#126989 = ORIENTED_EDGE('',*,*,#123677,.T.); +#126990 = PLANE('',#126991); +#126991 = AXIS2_PLACEMENT_3D('',#126992,#126993,#126994); +#126992 = CARTESIAN_POINT('',(2.305649973774,8.5,-1.489355309105)); +#126993 = DIRECTION('',(0.562790931242,0.,-0.8265992788)); +#126994 = DIRECTION('',(0.,-1.,0.)); +#126995 = ADVANCED_FACE('',(#126996),#127007,.T.); +#126996 = FACE_BOUND('',#126997,.T.); +#126997 = EDGE_LOOP('',(#126998,#126999,#127000,#127006)); +#126998 = ORIENTED_EDGE('',*,*,#126984,.T.); +#126999 = ORIENTED_EDGE('',*,*,#125524,.F.); +#127000 = ORIENTED_EDGE('',*,*,#127001,.F.); +#127001 = EDGE_CURVE('',#123686,#125517,#127002,.T.); +#127002 = LINE('',#127003,#127004); +#127003 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.475312757587)); +#127004 = VECTOR('',#127005,1.); +#127005 = DIRECTION('',(0.,1.,0.)); +#127006 = ORIENTED_EDGE('',*,*,#123685,.T.); +#127007 = PLANE('',#127008); +#127008 = AXIS2_PLACEMENT_3D('',#127009,#127010,#127011); +#127009 = CARTESIAN_POINT('',(2.374400026226,8.5,-1.475312757587)); +#127010 = DIRECTION('',(0.200123208493,0.,-0.979770739215)); +#127011 = DIRECTION('',(0.,-1.,0.)); +#127012 = ADVANCED_FACE('',(#127013),#127024,.T.); +#127013 = FACE_BOUND('',#127014,.T.); +#127014 = EDGE_LOOP('',(#127015,#127016,#127017,#127023)); +#127015 = ORIENTED_EDGE('',*,*,#127001,.T.); +#127016 = ORIENTED_EDGE('',*,*,#125516,.F.); +#127017 = ORIENTED_EDGE('',*,*,#127018,.F.); +#127018 = EDGE_CURVE('',#123694,#125509,#127019,.T.); +#127019 = LINE('',#127020,#127021); +#127020 = CARTESIAN_POINT('',(2.44315,8.5,-1.489355309105)); +#127021 = VECTOR('',#127022,1.); +#127022 = DIRECTION('',(0.,1.,0.)); +#127023 = ORIENTED_EDGE('',*,*,#123693,.T.); +#127024 = PLANE('',#127025); +#127025 = AXIS2_PLACEMENT_3D('',#127026,#127027,#127028); +#127026 = CARTESIAN_POINT('',(2.44315,8.5,-1.489355309105)); +#127027 = DIRECTION('',(-0.200123428343,0.,-0.97977069431)); +#127028 = DIRECTION('',(-0.97977069431,0.,0.200123428343)); +#127029 = ADVANCED_FACE('',(#127030),#127041,.T.); +#127030 = FACE_BOUND('',#127031,.T.); +#127031 = EDGE_LOOP('',(#127032,#127033,#127034,#127040)); +#127032 = ORIENTED_EDGE('',*,*,#127018,.T.); +#127033 = ORIENTED_EDGE('',*,*,#125508,.F.); +#127034 = ORIENTED_EDGE('',*,*,#127035,.F.); +#127035 = EDGE_CURVE('',#123702,#125501,#127036,.T.); +#127036 = LINE('',#127037,#127038); +#127037 = CARTESIAN_POINT('',(2.4844,8.5,-1.51744041214)); +#127038 = VECTOR('',#127039,1.); +#127039 = DIRECTION('',(0.,1.,0.)); +#127040 = ORIENTED_EDGE('',*,*,#123701,.T.); +#127041 = PLANE('',#127042); +#127042 = AXIS2_PLACEMENT_3D('',#127043,#127044,#127045); +#127043 = CARTESIAN_POINT('',(2.4844,8.5,-1.51744041214)); +#127044 = DIRECTION('',(-0.562790931242,0.,-0.8265992788)); +#127045 = DIRECTION('',(-0.8265992788,0.,0.562790931242)); +#127046 = ADVANCED_FACE('',(#127047),#127053,.T.); +#127047 = FACE_BOUND('',#127048,.T.); +#127048 = EDGE_LOOP('',(#127049,#127050,#127051,#127052)); +#127049 = ORIENTED_EDGE('',*,*,#127035,.T.); +#127050 = ORIENTED_EDGE('',*,*,#125498,.F.); +#127051 = ORIENTED_EDGE('',*,*,#126756,.F.); +#127052 = ORIENTED_EDGE('',*,*,#123709,.T.); +#127053 = PLANE('',#127054); +#127054 = AXIS2_PLACEMENT_3D('',#127055,#127056,#127057); +#127055 = CARTESIAN_POINT('',(2.539400026226,8.5,-1.601695760584)); +#127056 = DIRECTION('',(-0.837379118056,0.,-0.546622550435)); +#127057 = DIRECTION('',(-0.546622550435,0.,0.837379118056)); +#127058 = ADVANCED_FACE('',(#127059),#127075,.T.); +#127059 = FACE_BOUND('',#127060,.T.); +#127060 = EDGE_LOOP('',(#127061,#127067,#127068,#127074)); +#127061 = ORIENTED_EDGE('',*,*,#127062,.T.); +#127062 = EDGE_CURVE('',#122729,#125651,#127063,.T.); +#127063 = LINE('',#127064,#127065); +#127064 = CARTESIAN_POINT('',(-2.7948,8.5,-1.685951066113)); +#127065 = VECTOR('',#127066,1.); +#127066 = DIRECTION('',(0.,1.,0.)); +#127067 = ORIENTED_EDGE('',*,*,#125796,.F.); +#127068 = ORIENTED_EDGE('',*,*,#127069,.F.); +#127069 = EDGE_CURVE('',#122593,#125789,#127070,.T.); +#127070 = LINE('',#127071,#127072); +#127071 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.698717022038)); +#127072 = VECTOR('',#127073,1.); +#127073 = DIRECTION('',(0.,1.,0.)); +#127074 = ORIENTED_EDGE('',*,*,#122736,.T.); +#127075 = PLANE('',#127076); +#127076 = AXIS2_PLACEMENT_3D('',#127077,#127078,#127079); +#127077 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.698717022038)); +#127078 = DIRECTION('',(-0.454776941543,0.,-0.890605374698)); +#127079 = DIRECTION('',(-0.890605374698,0.,0.454776941543)); +#127080 = ADVANCED_FACE('',(#127081),#127092,.T.); +#127081 = FACE_BOUND('',#127082,.T.); +#127082 = EDGE_LOOP('',(#127083,#127084,#127085,#127091)); +#127083 = ORIENTED_EDGE('',*,*,#127069,.T.); +#127084 = ORIENTED_EDGE('',*,*,#125788,.F.); +#127085 = ORIENTED_EDGE('',*,*,#127086,.F.); +#127086 = EDGE_CURVE('',#122591,#125781,#127087,.T.); +#127087 = LINE('',#127088,#127089); +#127088 = CARTESIAN_POINT('',(-2.7948,8.5,-1.711482977962)); +#127089 = VECTOR('',#127090,1.); +#127090 = DIRECTION('',(0.,1.,0.)); +#127091 = ORIENTED_EDGE('',*,*,#122590,.T.); +#127092 = PLANE('',#127093); +#127093 = AXIS2_PLACEMENT_3D('',#127094,#127095,#127096); +#127094 = CARTESIAN_POINT('',(-2.7948,8.5,-1.711482977962)); +#127095 = DIRECTION('',(-0.454776941543,0.,0.890605374698)); +#127096 = DIRECTION('',(0.,1.,0.)); +#127097 = ADVANCED_FACE('',(#127098),#127109,.T.); +#127098 = FACE_BOUND('',#127099,.T.); +#127099 = EDGE_LOOP('',(#127100,#127101,#127102,#127108)); +#127100 = ORIENTED_EDGE('',*,*,#127086,.T.); +#127101 = ORIENTED_EDGE('',*,*,#125780,.F.); +#127102 = ORIENTED_EDGE('',*,*,#127103,.F.); +#127103 = EDGE_CURVE('',#122601,#125773,#127104,.T.); +#127104 = LINE('',#127105,#127106); +#127105 = CARTESIAN_POINT('',(-2.8323,8.5,-1.762546801662)); +#127106 = VECTOR('',#127107,1.); +#127107 = DIRECTION('',(0.,1.,-2.220446049251E-14)); +#127108 = ORIENTED_EDGE('',*,*,#122600,.T.); +#127109 = PLANE('',#127110); +#127110 = AXIS2_PLACEMENT_3D('',#127111,#127112,#127113); +#127111 = CARTESIAN_POINT('',(-2.8323,8.5,-1.762546801662)); +#127112 = DIRECTION('',(-0.806004395831,0.,0.59190954875)); +#127113 = DIRECTION('',(0.,1.,0.)); +#127114 = ADVANCED_FACE('',(#127115),#127126,.T.); +#127115 = FACE_BOUND('',#127116,.T.); +#127116 = EDGE_LOOP('',(#127117,#127118,#127119,#127125)); +#127117 = ORIENTED_EDGE('',*,*,#127103,.T.); +#127118 = ORIENTED_EDGE('',*,*,#125772,.F.); +#127119 = ORIENTED_EDGE('',*,*,#127120,.F.); +#127120 = EDGE_CURVE('',#122609,#125765,#127121,.T.); +#127121 = LINE('',#127122,#127123); +#127122 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.800844687319)); +#127123 = VECTOR('',#127124,1.); +#127124 = DIRECTION('',(0.,1.,-1.110223024625E-14)); +#127125 = ORIENTED_EDGE('',*,*,#122608,.T.); +#127126 = PLANE('',#127127); +#127127 = AXIS2_PLACEMENT_3D('',#127128,#127129,#127130); +#127128 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.800844687319)); +#127129 = DIRECTION('',(-0.950645322125,0.,0.310279666627)); +#127130 = DIRECTION('',(0.,1.,0.)); +#127131 = ADVANCED_FACE('',(#127132),#127143,.T.); +#127132 = FACE_BOUND('',#127133,.T.); +#127133 = EDGE_LOOP('',(#127134,#127135,#127136,#127142)); +#127134 = ORIENTED_EDGE('',*,*,#127120,.T.); +#127135 = ORIENTED_EDGE('',*,*,#125764,.F.); +#127136 = ORIENTED_EDGE('',*,*,#127137,.F.); +#127137 = EDGE_CURVE('',#122617,#125757,#127138,.T.); +#127138 = LINE('',#127139,#127140); +#127139 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.864674466944)); +#127140 = VECTOR('',#127141,1.); +#127141 = DIRECTION('',(0.,1.,0.)); +#127142 = ORIENTED_EDGE('',*,*,#122616,.T.); +#127143 = PLANE('',#127144); +#127144 = AXIS2_PLACEMENT_3D('',#127145,#127146,#127147); +#127145 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.864674466944)); +#127146 = DIRECTION('',(-1.,0.,0.)); +#127147 = DIRECTION('',(0.,0.,1.)); +#127148 = ADVANCED_FACE('',(#127149),#127160,.T.); +#127149 = FACE_BOUND('',#127150,.T.); +#127150 = EDGE_LOOP('',(#127151,#127152,#127153,#127159)); +#127151 = ORIENTED_EDGE('',*,*,#127137,.T.); +#127152 = ORIENTED_EDGE('',*,*,#125756,.F.); +#127153 = ORIENTED_EDGE('',*,*,#127154,.F.); +#127154 = EDGE_CURVE('',#122625,#125749,#127155,.T.); +#127155 = LINE('',#127156,#127157); +#127156 = CARTESIAN_POINT('',(-2.8323,8.5,-1.902972343659)); +#127157 = VECTOR('',#127158,1.); +#127158 = DIRECTION('',(0.,1.,0.)); +#127159 = ORIENTED_EDGE('',*,*,#122624,.T.); +#127160 = PLANE('',#127161); +#127161 = AXIS2_PLACEMENT_3D('',#127162,#127163,#127164); +#127162 = CARTESIAN_POINT('',(-2.8323,8.5,-1.902972343659)); +#127163 = DIRECTION('',(-0.950645300759,0.,-0.310279732089)); +#127164 = DIRECTION('',(-0.310279732089,0.,0.950645300759)); +#127165 = ADVANCED_FACE('',(#127166),#127177,.T.); +#127166 = FACE_BOUND('',#127167,.T.); +#127167 = EDGE_LOOP('',(#127168,#127169,#127170,#127176)); +#127168 = ORIENTED_EDGE('',*,*,#127154,.T.); +#127169 = ORIENTED_EDGE('',*,*,#125748,.F.); +#127170 = ORIENTED_EDGE('',*,*,#127171,.F.); +#127171 = EDGE_CURVE('',#122633,#125741,#127172,.T.); +#127172 = LINE('',#127173,#127174); +#127173 = CARTESIAN_POINT('',(-2.7948,8.5,-1.95403617183)); +#127174 = VECTOR('',#127175,1.); +#127175 = DIRECTION('',(0.,1.,0.)); +#127176 = ORIENTED_EDGE('',*,*,#122632,.T.); +#127177 = PLANE('',#127178); +#127178 = AXIS2_PLACEMENT_3D('',#127179,#127180,#127181); +#127179 = CARTESIAN_POINT('',(-2.7948,8.5,-1.95403617183)); +#127180 = DIRECTION('',(-0.806004420553,0.,-0.591909515086)); +#127181 = DIRECTION('',(-0.591909515086,0.,0.806004420553)); +#127182 = ADVANCED_FACE('',(#127183),#127194,.T.); +#127183 = FACE_BOUND('',#127184,.T.); +#127184 = EDGE_LOOP('',(#127185,#127186,#127187,#127193)); +#127185 = ORIENTED_EDGE('',*,*,#127171,.T.); +#127186 = ORIENTED_EDGE('',*,*,#125740,.F.); +#127187 = ORIENTED_EDGE('',*,*,#127188,.F.); +#127188 = EDGE_CURVE('',#122641,#125733,#127189,.T.); +#127189 = LINE('',#127190,#127191); +#127190 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.992334042957)); +#127191 = VECTOR('',#127192,1.); +#127192 = DIRECTION('',(-2.220446049251E-14,1.,0.)); +#127193 = ORIENTED_EDGE('',*,*,#122640,.T.); +#127194 = PLANE('',#127195); +#127195 = AXIS2_PLACEMENT_3D('',#127196,#127197,#127198); +#127196 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.992334042957)); +#127197 = DIRECTION('',(-0.608076957024,0.,-0.793878085311)); +#127198 = DIRECTION('',(-0.793878085311,0.,0.608076957024)); +#127199 = ADVANCED_FACE('',(#127200),#127211,.T.); +#127200 = FACE_BOUND('',#127201,.T.); +#127201 = EDGE_LOOP('',(#127202,#127203,#127204,#127210)); +#127202 = ORIENTED_EDGE('',*,*,#127188,.T.); +#127203 = ORIENTED_EDGE('',*,*,#125732,.F.); +#127204 = ORIENTED_EDGE('',*,*,#127205,.F.); +#127205 = EDGE_CURVE('',#122649,#125725,#127206,.T.); +#127206 = LINE('',#127207,#127208); +#127207 = CARTESIAN_POINT('',(-2.6823,8.5,-2.0051)); +#127208 = VECTOR('',#127209,1.); +#127209 = DIRECTION('',(0.,1.,0.)); +#127210 = ORIENTED_EDGE('',*,*,#122648,.T.); +#127211 = PLANE('',#127212); +#127212 = AXIS2_PLACEMENT_3D('',#127213,#127214,#127215); +#127213 = CARTESIAN_POINT('',(-2.6823,8.5,-2.0051)); +#127214 = DIRECTION('',(-0.200123335236,0.,-0.979770713327)); +#127215 = DIRECTION('',(-0.979770713327,0.,0.200123335236)); +#127216 = ADVANCED_FACE('',(#127217),#127228,.T.); +#127217 = FACE_BOUND('',#127218,.T.); +#127218 = EDGE_LOOP('',(#127219,#127220,#127221,#127227)); +#127219 = ORIENTED_EDGE('',*,*,#127205,.T.); +#127220 = ORIENTED_EDGE('',*,*,#125724,.F.); +#127221 = ORIENTED_EDGE('',*,*,#127222,.F.); +#127222 = EDGE_CURVE('',#122657,#125717,#127223,.T.); +#127223 = LINE('',#127224,#127225); +#127224 = CARTESIAN_POINT('',(-2.3823,8.5,-2.0051)); +#127225 = VECTOR('',#127226,1.); +#127226 = DIRECTION('',(0.,1.,0.)); +#127227 = ORIENTED_EDGE('',*,*,#122656,.T.); +#127228 = PLANE('',#127229); +#127229 = AXIS2_PLACEMENT_3D('',#127230,#127231,#127232); +#127230 = CARTESIAN_POINT('',(-2.3823,8.5,-2.0051)); +#127231 = DIRECTION('',(0.,0.,-1.)); +#127232 = DIRECTION('',(0.,-1.,0.)); +#127233 = ADVANCED_FACE('',(#127234),#127245,.T.); +#127234 = FACE_BOUND('',#127235,.T.); +#127235 = EDGE_LOOP('',(#127236,#127237,#127238,#127244)); +#127236 = ORIENTED_EDGE('',*,*,#127222,.T.); +#127237 = ORIENTED_EDGE('',*,*,#125716,.F.); +#127238 = ORIENTED_EDGE('',*,*,#127239,.F.); +#127239 = EDGE_CURVE('',#122665,#125709,#127240,.T.); +#127240 = LINE('',#127241,#127242); +#127241 = CARTESIAN_POINT('',(-2.3823,8.5,-1.4051)); +#127242 = VECTOR('',#127243,1.); +#127243 = DIRECTION('',(0.,1.,0.)); +#127244 = ORIENTED_EDGE('',*,*,#122664,.T.); +#127245 = PLANE('',#127246); +#127246 = AXIS2_PLACEMENT_3D('',#127247,#127248,#127249); +#127247 = CARTESIAN_POINT('',(-2.3823,8.5,-1.4051)); +#127248 = DIRECTION('',(1.,0.,0.)); +#127249 = DIRECTION('',(-0.,1.,0.)); +#127250 = ADVANCED_FACE('',(#127251),#127262,.T.); +#127251 = FACE_BOUND('',#127252,.T.); +#127252 = EDGE_LOOP('',(#127253,#127254,#127255,#127261)); +#127253 = ORIENTED_EDGE('',*,*,#127239,.T.); +#127254 = ORIENTED_EDGE('',*,*,#125708,.F.); +#127255 = ORIENTED_EDGE('',*,*,#127256,.F.); +#127256 = EDGE_CURVE('',#122673,#125701,#127257,.T.); +#127257 = LINE('',#127258,#127259); +#127258 = CARTESIAN_POINT('',(-2.6823,8.5,-1.4051)); +#127259 = VECTOR('',#127260,1.); +#127260 = DIRECTION('',(0.,1.,0.)); +#127261 = ORIENTED_EDGE('',*,*,#122672,.T.); +#127262 = PLANE('',#127263); +#127263 = AXIS2_PLACEMENT_3D('',#127264,#127265,#127266); +#127264 = CARTESIAN_POINT('',(-2.6823,8.5,-1.4051)); +#127265 = DIRECTION('',(0.,0.,1.)); +#127266 = DIRECTION('',(1.,0.,-0.)); +#127267 = ADVANCED_FACE('',(#127268),#127279,.T.); +#127268 = FACE_BOUND('',#127269,.T.); +#127269 = EDGE_LOOP('',(#127270,#127271,#127272,#127278)); +#127270 = ORIENTED_EDGE('',*,*,#127256,.T.); +#127271 = ORIENTED_EDGE('',*,*,#125700,.F.); +#127272 = ORIENTED_EDGE('',*,*,#127273,.F.); +#127273 = EDGE_CURVE('',#122681,#125693,#127274,.T.); +#127274 = LINE('',#127275,#127276); +#127275 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.417865955925)); +#127276 = VECTOR('',#127277,1.); +#127277 = DIRECTION('',(0.,1.,0.)); +#127278 = ORIENTED_EDGE('',*,*,#122680,.T.); +#127279 = PLANE('',#127280); +#127280 = AXIS2_PLACEMENT_3D('',#127281,#127282,#127283); +#127281 = CARTESIAN_POINT('',(-2.744800011921,8.5,-1.417865955925)); +#127282 = DIRECTION('',(-0.200123318418,0.,0.979770716763)); +#127283 = DIRECTION('',(0.,1.,0.)); +#127284 = ADVANCED_FACE('',(#127285),#127296,.T.); +#127285 = FACE_BOUND('',#127286,.T.); +#127286 = EDGE_LOOP('',(#127287,#127288,#127289,#127295)); +#127287 = ORIENTED_EDGE('',*,*,#127273,.T.); +#127288 = ORIENTED_EDGE('',*,*,#125692,.F.); +#127289 = ORIENTED_EDGE('',*,*,#127290,.F.); +#127290 = EDGE_CURVE('',#122689,#125685,#127291,.T.); +#127291 = LINE('',#127292,#127293); +#127292 = CARTESIAN_POINT('',(-2.7948,8.5,-1.4561638237)); +#127293 = VECTOR('',#127294,1.); +#127294 = DIRECTION('',(0.,1.,0.)); +#127295 = ORIENTED_EDGE('',*,*,#122688,.T.); +#127296 = PLANE('',#127297); +#127297 = AXIS2_PLACEMENT_3D('',#127298,#127299,#127300); +#127298 = CARTESIAN_POINT('',(-2.7948,8.5,-1.4561638237)); +#127299 = DIRECTION('',(-0.608076923474,0.,0.793878111009)); +#127300 = DIRECTION('',(0.,1.,0.)); +#127301 = ADVANCED_FACE('',(#127302),#127313,.T.); +#127302 = FACE_BOUND('',#127303,.T.); +#127303 = EDGE_LOOP('',(#127304,#127305,#127306,#127312)); +#127304 = ORIENTED_EDGE('',*,*,#127290,.T.); +#127305 = ORIENTED_EDGE('',*,*,#125684,.F.); +#127306 = ORIENTED_EDGE('',*,*,#127307,.F.); +#127307 = EDGE_CURVE('',#122697,#125677,#127308,.T.); +#127308 = LINE('',#127309,#127310); +#127309 = CARTESIAN_POINT('',(-2.8323,8.5,-1.5072276474)); +#127310 = VECTOR('',#127311,1.); +#127311 = DIRECTION('',(0.,1.,0.)); +#127312 = ORIENTED_EDGE('',*,*,#122696,.T.); +#127313 = PLANE('',#127314); +#127314 = AXIS2_PLACEMENT_3D('',#127315,#127316,#127317); +#127315 = CARTESIAN_POINT('',(-2.8323,8.5,-1.5072276474)); +#127316 = DIRECTION('',(-0.806004395831,0.,0.59190954875)); +#127317 = DIRECTION('',(0.,1.,0.)); +#127318 = ADVANCED_FACE('',(#127319),#127330,.T.); +#127319 = FACE_BOUND('',#127320,.T.); +#127320 = EDGE_LOOP('',(#127321,#127322,#127323,#127329)); +#127321 = ORIENTED_EDGE('',*,*,#127307,.T.); +#127322 = ORIENTED_EDGE('',*,*,#125676,.F.); +#127323 = ORIENTED_EDGE('',*,*,#127324,.F.); +#127324 = EDGE_CURVE('',#122705,#125669,#127325,.T.); +#127325 = LINE('',#127326,#127327); +#127326 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.545525515175)); +#127327 = VECTOR('',#127328,1.); +#127328 = DIRECTION('',(0.,1.,0.)); +#127329 = ORIENTED_EDGE('',*,*,#122704,.T.); +#127330 = PLANE('',#127331); +#127331 = AXIS2_PLACEMENT_3D('',#127332,#127333,#127334); +#127332 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.545525515175)); +#127333 = DIRECTION('',(-0.950645279393,0.,0.310279797551)); +#127334 = DIRECTION('',(0.,1.,0.)); +#127335 = ADVANCED_FACE('',(#127336),#127347,.T.); +#127336 = FACE_BOUND('',#127337,.T.); +#127337 = EDGE_LOOP('',(#127338,#127339,#127340,#127346)); +#127338 = ORIENTED_EDGE('',*,*,#127324,.T.); +#127339 = ORIENTED_EDGE('',*,*,#125668,.F.); +#127340 = ORIENTED_EDGE('',*,*,#127341,.F.); +#127341 = EDGE_CURVE('',#122713,#125661,#127342,.T.); +#127342 = LINE('',#127343,#127344); +#127343 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.596589374638)); +#127344 = VECTOR('',#127345,1.); +#127345 = DIRECTION('',(0.,1.,0.)); +#127346 = ORIENTED_EDGE('',*,*,#122712,.T.); +#127347 = PLANE('',#127348); +#127348 = AXIS2_PLACEMENT_3D('',#127349,#127350,#127351); +#127349 = CARTESIAN_POINT('',(-2.844799988079,8.5,-1.596589374638)); +#127350 = DIRECTION('',(-1.,0.,0.)); +#127351 = DIRECTION('',(0.,0.,1.)); +#127352 = ADVANCED_FACE('',(#127353),#127364,.T.); +#127353 = FACE_BOUND('',#127354,.T.); +#127354 = EDGE_LOOP('',(#127355,#127356,#127357,#127363)); +#127355 = ORIENTED_EDGE('',*,*,#127341,.T.); +#127356 = ORIENTED_EDGE('',*,*,#125660,.F.); +#127357 = ORIENTED_EDGE('',*,*,#127358,.F.); +#127358 = EDGE_CURVE('',#122721,#125653,#127359,.T.); +#127359 = LINE('',#127360,#127361); +#127360 = CARTESIAN_POINT('',(-2.8323,8.5,-1.634887242413)); +#127361 = VECTOR('',#127362,1.); +#127362 = DIRECTION('',(0.,1.,2.220446049251E-14)); +#127363 = ORIENTED_EDGE('',*,*,#122720,.T.); +#127364 = PLANE('',#127365); +#127365 = AXIS2_PLACEMENT_3D('',#127366,#127367,#127368); +#127366 = CARTESIAN_POINT('',(-2.8323,8.5,-1.634887242413)); +#127367 = DIRECTION('',(-0.950645279393,0.,-0.310279797551)); +#127368 = DIRECTION('',(-0.310279797551,0.,0.950645279393)); +#127369 = ADVANCED_FACE('',(#127370),#127376,.T.); +#127370 = FACE_BOUND('',#127371,.T.); +#127371 = EDGE_LOOP('',(#127372,#127373,#127374,#127375)); +#127372 = ORIENTED_EDGE('',*,*,#127358,.T.); +#127373 = ORIENTED_EDGE('',*,*,#125650,.F.); +#127374 = ORIENTED_EDGE('',*,*,#127062,.F.); +#127375 = ORIENTED_EDGE('',*,*,#122728,.T.); +#127376 = PLANE('',#127377); +#127377 = AXIS2_PLACEMENT_3D('',#127378,#127379,#127380); +#127378 = CARTESIAN_POINT('',(-2.7948,8.5,-1.685951066113)); +#127379 = DIRECTION('',(-0.806004395831,0.,-0.59190954875)); +#127380 = DIRECTION('',(-0.59190954875,0.,0.806004395831)); +#127381 = ADVANCED_FACE('',(#127382),#127398,.T.); +#127382 = FACE_BOUND('',#127383,.T.); +#127383 = EDGE_LOOP('',(#127384,#127390,#127391,#127397)); +#127384 = ORIENTED_EDGE('',*,*,#127385,.T.); +#127385 = EDGE_CURVE('',#123798,#125805,#127386,.T.); +#127386 = LINE('',#127387,#127388); +#127387 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.48169573555)); +#127388 = VECTOR('',#127389,1.); +#127389 = DIRECTION('',(0.,1.,0.)); +#127390 = ORIENTED_EDGE('',*,*,#125878,.F.); +#127391 = ORIENTED_EDGE('',*,*,#127392,.F.); +#127392 = EDGE_CURVE('',#123734,#125871,#127393,.T.); +#127393 = LINE('',#127394,#127395); +#127394 = CARTESIAN_POINT('',(-2.4573,8.5,-1.48169573555)); +#127395 = VECTOR('',#127396,1.); +#127396 = DIRECTION('',(0.,1.,0.)); +#127397 = ORIENTED_EDGE('',*,*,#123805,.T.); +#127398 = PLANE('',#127399); +#127399 = AXIS2_PLACEMENT_3D('',#127400,#127401,#127402); +#127400 = CARTESIAN_POINT('',(-2.4573,8.5,-1.48169573555)); +#127401 = DIRECTION('',(0.,0.,-1.)); +#127402 = DIRECTION('',(0.,-1.,0.)); +#127403 = ADVANCED_FACE('',(#127404),#127415,.T.); +#127404 = FACE_BOUND('',#127405,.T.); +#127405 = EDGE_LOOP('',(#127406,#127407,#127408,#127414)); +#127406 = ORIENTED_EDGE('',*,*,#127392,.T.); +#127407 = ORIENTED_EDGE('',*,*,#125870,.F.); +#127408 = ORIENTED_EDGE('',*,*,#127409,.F.); +#127409 = EDGE_CURVE('',#123732,#125863,#127410,.T.); +#127410 = LINE('',#127411,#127412); +#127411 = CARTESIAN_POINT('',(-2.4573,8.5,-1.660419154263)); +#127412 = VECTOR('',#127413,1.); +#127413 = DIRECTION('',(0.,1.,0.)); +#127414 = ORIENTED_EDGE('',*,*,#123731,.T.); +#127415 = PLANE('',#127416); +#127416 = AXIS2_PLACEMENT_3D('',#127417,#127418,#127419); +#127417 = CARTESIAN_POINT('',(-2.4573,8.5,-1.660419154263)); +#127418 = DIRECTION('',(-1.,0.,0.)); +#127419 = DIRECTION('',(0.,0.,1.)); +#127420 = ADVANCED_FACE('',(#127421),#127432,.T.); +#127421 = FACE_BOUND('',#127422,.T.); +#127422 = EDGE_LOOP('',(#127423,#127424,#127425,#127431)); +#127423 = ORIENTED_EDGE('',*,*,#127409,.T.); +#127424 = ORIENTED_EDGE('',*,*,#125862,.F.); +#127425 = ORIENTED_EDGE('',*,*,#127426,.F.); +#127426 = EDGE_CURVE('',#123742,#125855,#127427,.T.); +#127427 = LINE('',#127428,#127429); +#127428 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.660419154263)); +#127429 = VECTOR('',#127430,1.); +#127430 = DIRECTION('',(0.,1.,0.)); +#127431 = ORIENTED_EDGE('',*,*,#123741,.T.); +#127432 = PLANE('',#127433); +#127433 = AXIS2_PLACEMENT_3D('',#127434,#127435,#127436); +#127434 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.660419154263)); +#127435 = DIRECTION('',(0.,0.,1.)); +#127436 = DIRECTION('',(1.,0.,-0.)); +#127437 = ADVANCED_FACE('',(#127438),#127449,.T.); +#127438 = FACE_BOUND('',#127439,.T.); +#127439 = EDGE_LOOP('',(#127440,#127441,#127442,#127448)); +#127440 = ORIENTED_EDGE('',*,*,#127426,.T.); +#127441 = ORIENTED_EDGE('',*,*,#125854,.F.); +#127442 = ORIENTED_EDGE('',*,*,#127443,.F.); +#127443 = EDGE_CURVE('',#123750,#125847,#127444,.T.); +#127444 = LINE('',#127445,#127446); +#127445 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.647653198338)); +#127446 = VECTOR('',#127447,1.); +#127447 = DIRECTION('',(0.,1.,0.)); +#127448 = ORIENTED_EDGE('',*,*,#123749,.T.); +#127449 = PLANE('',#127450); +#127450 = AXIS2_PLACEMENT_3D('',#127451,#127452,#127453); +#127451 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.647653198338)); +#127452 = DIRECTION('',(0.322263763377,0.,0.94664991777)); +#127453 = DIRECTION('',(0.,-1.,0.)); +#127454 = ADVANCED_FACE('',(#127455),#127466,.T.); +#127455 = FACE_BOUND('',#127456,.T.); +#127456 = EDGE_LOOP('',(#127457,#127458,#127459,#127465)); +#127457 = ORIENTED_EDGE('',*,*,#127443,.T.); +#127458 = ORIENTED_EDGE('',*,*,#125846,.F.); +#127459 = ORIENTED_EDGE('',*,*,#127460,.F.); +#127460 = EDGE_CURVE('',#123758,#125839,#127461,.T.); +#127461 = LINE('',#127462,#127463); +#127462 = CARTESIAN_POINT('',(-2.7573,8.5,-1.622121286488)); +#127463 = VECTOR('',#127464,1.); +#127464 = DIRECTION('',(0.,1.,0.)); +#127465 = ORIENTED_EDGE('',*,*,#123757,.T.); +#127466 = PLANE('',#127467); +#127467 = AXIS2_PLACEMENT_3D('',#127468,#127469,#127470); +#127468 = CARTESIAN_POINT('',(-2.7573,8.5,-1.622121286488)); +#127469 = DIRECTION('',(0.714510218035,0.,0.699625005502)); +#127470 = DIRECTION('',(0.,-1.,0.)); +#127471 = ADVANCED_FACE('',(#127472),#127483,.T.); +#127472 = FACE_BOUND('',#127473,.T.); +#127473 = EDGE_LOOP('',(#127474,#127475,#127476,#127482)); +#127474 = ORIENTED_EDGE('',*,*,#127460,.T.); +#127475 = ORIENTED_EDGE('',*,*,#125838,.F.); +#127476 = ORIENTED_EDGE('',*,*,#127477,.F.); +#127477 = EDGE_CURVE('',#123766,#125831,#127478,.T.); +#127478 = LINE('',#127479,#127480); +#127479 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.583823418713)); +#127480 = VECTOR('',#127481,1.); +#127481 = DIRECTION('',(0.,1.,1.110223024625E-14)); +#127482 = ORIENTED_EDGE('',*,*,#123765,.T.); +#127483 = PLANE('',#127484); +#127484 = AXIS2_PLACEMENT_3D('',#127485,#127486,#127487); +#127485 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.583823418713)); +#127486 = DIRECTION('',(0.950645279393,0.,0.310279797551)); +#127487 = DIRECTION('',(0.,-1.,0.)); +#127488 = ADVANCED_FACE('',(#127489),#127500,.T.); +#127489 = FACE_BOUND('',#127490,.T.); +#127490 = EDGE_LOOP('',(#127491,#127492,#127493,#127499)); +#127491 = ORIENTED_EDGE('',*,*,#127477,.T.); +#127492 = ORIENTED_EDGE('',*,*,#125830,.F.); +#127493 = ORIENTED_EDGE('',*,*,#127494,.F.); +#127494 = EDGE_CURVE('',#123774,#125823,#127495,.T.); +#127495 = LINE('',#127496,#127497); +#127496 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.558291506863)); +#127497 = VECTOR('',#127498,1.); +#127498 = DIRECTION('',(0.,1.,0.)); +#127499 = ORIENTED_EDGE('',*,*,#123773,.T.); +#127500 = PLANE('',#127501); +#127501 = AXIS2_PLACEMENT_3D('',#127502,#127503,#127504); +#127502 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.558291506863)); +#127503 = DIRECTION('',(1.,0.,0.)); +#127504 = DIRECTION('',(-0.,1.,0.)); +#127505 = ADVANCED_FACE('',(#127506),#127517,.T.); +#127506 = FACE_BOUND('',#127507,.T.); +#127507 = EDGE_LOOP('',(#127508,#127509,#127510,#127516)); +#127508 = ORIENTED_EDGE('',*,*,#127494,.T.); +#127509 = ORIENTED_EDGE('',*,*,#125822,.F.); +#127510 = ORIENTED_EDGE('',*,*,#127511,.F.); +#127511 = EDGE_CURVE('',#123782,#125815,#127512,.T.); +#127512 = LINE('',#127513,#127514); +#127513 = CARTESIAN_POINT('',(-2.7573,8.5,-1.519993603325)); +#127514 = VECTOR('',#127515,1.); +#127515 = DIRECTION('',(0.,1.,0.)); +#127516 = ORIENTED_EDGE('',*,*,#123781,.T.); +#127517 = PLANE('',#127518); +#127518 = AXIS2_PLACEMENT_3D('',#127519,#127520,#127521); +#127519 = CARTESIAN_POINT('',(-2.7573,8.5,-1.519993603325)); +#127520 = DIRECTION('',(0.950645364857,0.,-0.310279535704)); +#127521 = DIRECTION('',(0.,-1.,0.)); +#127522 = ADVANCED_FACE('',(#127523),#127534,.T.); +#127523 = FACE_BOUND('',#127524,.T.); +#127524 = EDGE_LOOP('',(#127525,#127526,#127527,#127533)); +#127525 = ORIENTED_EDGE('',*,*,#127511,.T.); +#127526 = ORIENTED_EDGE('',*,*,#125814,.F.); +#127527 = ORIENTED_EDGE('',*,*,#127528,.F.); +#127528 = EDGE_CURVE('',#123790,#125807,#127529,.T.); +#127529 = LINE('',#127530,#127531); +#127530 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.494461691475)); +#127531 = VECTOR('',#127532,1.); +#127532 = DIRECTION('',(0.,1.,1.110223024625E-14)); +#127533 = ORIENTED_EDGE('',*,*,#123789,.T.); +#127534 = PLANE('',#127535); +#127535 = AXIS2_PLACEMENT_3D('',#127536,#127537,#127538); +#127536 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.494461691475)); +#127537 = DIRECTION('',(0.714510218035,0.,-0.699625005502)); +#127538 = DIRECTION('',(0.,-1.,0.)); +#127539 = ADVANCED_FACE('',(#127540),#127546,.T.); +#127540 = FACE_BOUND('',#127541,.T.); +#127541 = EDGE_LOOP('',(#127542,#127543,#127544,#127545)); +#127542 = ORIENTED_EDGE('',*,*,#127528,.T.); +#127543 = ORIENTED_EDGE('',*,*,#125804,.F.); +#127544 = ORIENTED_EDGE('',*,*,#127385,.F.); +#127545 = ORIENTED_EDGE('',*,*,#123797,.T.); +#127546 = PLANE('',#127547); +#127547 = AXIS2_PLACEMENT_3D('',#127548,#127549,#127550); +#127548 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.48169573555)); +#127549 = DIRECTION('',(0.322263763377,0.,-0.94664991777)); +#127550 = DIRECTION('',(0.,-1.,0.)); +#127551 = ADVANCED_FACE('',(#127552),#127568,.T.); +#127552 = FACE_BOUND('',#127553,.T.); +#127553 = EDGE_LOOP('',(#127554,#127560,#127561,#127567)); +#127554 = ORIENTED_EDGE('',*,*,#127555,.T.); +#127555 = EDGE_CURVE('',#123886,#125887,#127556,.T.); +#127556 = LINE('',#127557,#127558); +#127557 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.851908511019)); +#127558 = VECTOR('',#127559,1.); +#127559 = DIRECTION('',(0.,1.,0.)); +#127560 = ORIENTED_EDGE('',*,*,#125960,.F.); +#127561 = ORIENTED_EDGE('',*,*,#127562,.F.); +#127562 = EDGE_CURVE('',#123822,#125953,#127563,.T.); +#127563 = LINE('',#127564,#127565); +#127564 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.813610643244)); +#127565 = VECTOR('',#127566,1.); +#127566 = DIRECTION('',(0.,1.,0.)); +#127567 = ORIENTED_EDGE('',*,*,#123893,.T.); +#127568 = PLANE('',#127569); +#127569 = AXIS2_PLACEMENT_3D('',#127570,#127571,#127572); +#127570 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.813610643244)); +#127571 = DIRECTION('',(1.,0.,0.)); +#127572 = DIRECTION('',(-0.,1.,0.)); +#127573 = ADVANCED_FACE('',(#127574),#127585,.T.); +#127574 = FACE_BOUND('',#127575,.T.); +#127575 = EDGE_LOOP('',(#127576,#127577,#127578,#127584)); +#127576 = ORIENTED_EDGE('',*,*,#127562,.T.); +#127577 = ORIENTED_EDGE('',*,*,#125952,.F.); +#127578 = ORIENTED_EDGE('',*,*,#127579,.F.); +#127579 = EDGE_CURVE('',#123820,#125945,#127580,.T.); +#127580 = LINE('',#127581,#127582); +#127581 = CARTESIAN_POINT('',(-2.7573,8.5,-1.775312757587)); +#127582 = VECTOR('',#127583,1.); +#127583 = DIRECTION('',(-2.220446049251E-14,1.,0.)); +#127584 = ORIENTED_EDGE('',*,*,#123819,.T.); +#127585 = PLANE('',#127586); +#127586 = AXIS2_PLACEMENT_3D('',#127587,#127588,#127589); +#127587 = CARTESIAN_POINT('',(-2.7573,8.5,-1.775312757587)); +#127588 = DIRECTION('',(0.950645322125,0.,-0.310279666627)); +#127589 = DIRECTION('',(0.,-1.,0.)); +#127590 = ADVANCED_FACE('',(#127591),#127602,.T.); +#127591 = FACE_BOUND('',#127592,.T.); +#127592 = EDGE_LOOP('',(#127593,#127594,#127595,#127601)); +#127593 = ORIENTED_EDGE('',*,*,#127579,.T.); +#127594 = ORIENTED_EDGE('',*,*,#125944,.F.); +#127595 = ORIENTED_EDGE('',*,*,#127596,.F.); +#127596 = EDGE_CURVE('',#123830,#125937,#127597,.T.); +#127597 = LINE('',#127598,#127599); +#127598 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.749780845737)); +#127599 = VECTOR('',#127600,1.); +#127600 = DIRECTION('',(0.,1.,0.)); +#127601 = ORIENTED_EDGE('',*,*,#123829,.T.); +#127602 = PLANE('',#127603); +#127603 = AXIS2_PLACEMENT_3D('',#127604,#127605,#127606); +#127604 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.749780845737)); +#127605 = DIRECTION('',(0.714510218035,0.,-0.699625005502)); +#127606 = DIRECTION('',(0.,-1.,0.)); +#127607 = ADVANCED_FACE('',(#127608),#127619,.T.); +#127608 = FACE_BOUND('',#127609,.T.); +#127609 = EDGE_LOOP('',(#127610,#127611,#127612,#127618)); +#127610 = ORIENTED_EDGE('',*,*,#127596,.T.); +#127611 = ORIENTED_EDGE('',*,*,#125936,.F.); +#127612 = ORIENTED_EDGE('',*,*,#127613,.F.); +#127613 = EDGE_CURVE('',#123838,#125929,#127614,.T.); +#127614 = LINE('',#127615,#127616); +#127615 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.737014889812)); +#127616 = VECTOR('',#127617,1.); +#127617 = DIRECTION('',(0.,1.,0.)); +#127618 = ORIENTED_EDGE('',*,*,#123837,.T.); +#127619 = PLANE('',#127620); +#127620 = AXIS2_PLACEMENT_3D('',#127621,#127622,#127623); +#127621 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.737014889812)); +#127622 = DIRECTION('',(0.322263763377,0.,-0.94664991777)); +#127623 = DIRECTION('',(0.,-1.,0.)); +#127624 = ADVANCED_FACE('',(#127625),#127636,.T.); +#127625 = FACE_BOUND('',#127626,.T.); +#127626 = EDGE_LOOP('',(#127627,#127628,#127629,#127635)); +#127627 = ORIENTED_EDGE('',*,*,#127613,.T.); +#127628 = ORIENTED_EDGE('',*,*,#125928,.F.); +#127629 = ORIENTED_EDGE('',*,*,#127630,.F.); +#127630 = EDGE_CURVE('',#123846,#125921,#127631,.T.); +#127631 = LINE('',#127632,#127633); +#127632 = CARTESIAN_POINT('',(-2.4573,8.5,-1.737014889812)); +#127633 = VECTOR('',#127634,1.); +#127634 = DIRECTION('',(0.,1.,0.)); +#127635 = ORIENTED_EDGE('',*,*,#123845,.T.); +#127636 = PLANE('',#127637); +#127637 = AXIS2_PLACEMENT_3D('',#127638,#127639,#127640); +#127638 = CARTESIAN_POINT('',(-2.4573,8.5,-1.737014889812)); +#127639 = DIRECTION('',(0.,0.,-1.)); +#127640 = DIRECTION('',(0.,-1.,0.)); +#127641 = ADVANCED_FACE('',(#127642),#127653,.T.); +#127642 = FACE_BOUND('',#127643,.T.); +#127643 = EDGE_LOOP('',(#127644,#127645,#127646,#127652)); +#127644 = ORIENTED_EDGE('',*,*,#127630,.T.); +#127645 = ORIENTED_EDGE('',*,*,#125920,.F.); +#127646 = ORIENTED_EDGE('',*,*,#127647,.F.); +#127647 = EDGE_CURVE('',#123854,#125913,#127648,.T.); +#127648 = LINE('',#127649,#127650); +#127649 = CARTESIAN_POINT('',(-2.4573,8.5,-1.928504255509)); +#127650 = VECTOR('',#127651,1.); +#127651 = DIRECTION('',(0.,1.,0.)); +#127652 = ORIENTED_EDGE('',*,*,#123853,.T.); +#127653 = PLANE('',#127654); +#127654 = AXIS2_PLACEMENT_3D('',#127655,#127656,#127657); +#127655 = CARTESIAN_POINT('',(-2.4573,8.5,-1.928504255509)); +#127656 = DIRECTION('',(-1.,0.,0.)); +#127657 = DIRECTION('',(0.,0.,1.)); +#127658 = ADVANCED_FACE('',(#127659),#127670,.T.); +#127659 = FACE_BOUND('',#127660,.T.); +#127660 = EDGE_LOOP('',(#127661,#127662,#127663,#127669)); +#127661 = ORIENTED_EDGE('',*,*,#127647,.T.); +#127662 = ORIENTED_EDGE('',*,*,#125912,.F.); +#127663 = ORIENTED_EDGE('',*,*,#127664,.F.); +#127664 = EDGE_CURVE('',#123862,#125905,#127665,.T.); +#127665 = LINE('',#127666,#127667); +#127666 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.928504255509)); +#127667 = VECTOR('',#127668,1.); +#127668 = DIRECTION('',(0.,1.,0.)); +#127669 = ORIENTED_EDGE('',*,*,#123861,.T.); +#127670 = PLANE('',#127671); +#127671 = AXIS2_PLACEMENT_3D('',#127672,#127673,#127674); +#127672 = CARTESIAN_POINT('',(-2.694799988079,8.5,-1.928504255509)); +#127673 = DIRECTION('',(0.,0.,1.)); +#127674 = DIRECTION('',(1.,0.,-0.)); +#127675 = ADVANCED_FACE('',(#127676),#127687,.T.); +#127676 = FACE_BOUND('',#127677,.T.); +#127677 = EDGE_LOOP('',(#127678,#127679,#127680,#127686)); +#127678 = ORIENTED_EDGE('',*,*,#127664,.T.); +#127679 = ORIENTED_EDGE('',*,*,#125904,.F.); +#127680 = ORIENTED_EDGE('',*,*,#127681,.F.); +#127681 = EDGE_CURVE('',#123870,#125897,#127682,.T.); +#127682 = LINE('',#127683,#127684); +#127683 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.915738299584)); +#127684 = VECTOR('',#127685,1.); +#127685 = DIRECTION('',(0.,1.,0.)); +#127686 = ORIENTED_EDGE('',*,*,#123869,.T.); +#127687 = PLANE('',#127688); +#127688 = AXIS2_PLACEMENT_3D('',#127689,#127690,#127691); +#127689 = CARTESIAN_POINT('',(-2.732299988079,8.5,-1.915738299584)); +#127690 = DIRECTION('',(0.322263763377,0.,0.94664991777)); +#127691 = DIRECTION('',(0.,-1.,0.)); +#127692 = ADVANCED_FACE('',(#127693),#127704,.T.); +#127693 = FACE_BOUND('',#127694,.T.); +#127694 = EDGE_LOOP('',(#127695,#127696,#127697,#127703)); +#127695 = ORIENTED_EDGE('',*,*,#127681,.T.); +#127696 = ORIENTED_EDGE('',*,*,#125896,.F.); +#127697 = ORIENTED_EDGE('',*,*,#127698,.F.); +#127698 = EDGE_CURVE('',#123878,#125889,#127699,.T.); +#127699 = LINE('',#127700,#127701); +#127700 = CARTESIAN_POINT('',(-2.7573,8.5,-1.890206378794)); +#127701 = VECTOR('',#127702,1.); +#127702 = DIRECTION('',(0.,1.,0.)); +#127703 = ORIENTED_EDGE('',*,*,#123877,.T.); +#127704 = PLANE('',#127705); +#127705 = AXIS2_PLACEMENT_3D('',#127706,#127707,#127708); +#127706 = CARTESIAN_POINT('',(-2.7573,8.5,-1.890206378794)); +#127707 = DIRECTION('',(0.714510340504,0.,0.699624880427)); +#127708 = DIRECTION('',(0.,-1.,0.)); +#127709 = ADVANCED_FACE('',(#127710),#127716,.T.); +#127710 = FACE_BOUND('',#127711,.T.); +#127711 = EDGE_LOOP('',(#127712,#127713,#127714,#127715)); +#127712 = ORIENTED_EDGE('',*,*,#127698,.T.); +#127713 = ORIENTED_EDGE('',*,*,#125886,.F.); +#127714 = ORIENTED_EDGE('',*,*,#127555,.F.); +#127715 = ORIENTED_EDGE('',*,*,#123885,.T.); +#127716 = PLANE('',#127717); +#127717 = AXIS2_PLACEMENT_3D('',#127718,#127719,#127720); +#127718 = CARTESIAN_POINT('',(-2.769799988079,8.5,-1.851908511019)); +#127719 = DIRECTION('',(0.950645279393,0.,0.310279797551)); +#127720 = DIRECTION('',(0.,-1.,0.)); +#127721 = ADVANCED_FACE('',(#127722),#127748,.F.); +#127722 = FACE_BOUND('',#127723,.F.); +#127723 = EDGE_LOOP('',(#127724,#127725,#127733,#127742)); +#127724 = ORIENTED_EDGE('',*,*,#122404,.F.); +#127725 = ORIENTED_EDGE('',*,*,#127726,.T.); +#127726 = EDGE_CURVE('',#122396,#127727,#127729,.T.); +#127727 = VERTEX_POINT('',#127728); +#127728 = CARTESIAN_POINT('',(0.,8.5,-7.25)); +#127729 = LINE('',#127730,#127731); +#127730 = CARTESIAN_POINT('',(0.,8.9,-7.25)); +#127731 = VECTOR('',#127732,1.); +#127732 = DIRECTION('',(0.,-1.,0.)); +#127733 = ORIENTED_EDGE('',*,*,#127734,.T.); +#127734 = EDGE_CURVE('',#127727,#127735,#127737,.T.); +#127735 = VERTEX_POINT('',#127736); +#127736 = CARTESIAN_POINT('',(0.,8.5,-2.25)); +#127737 = CIRCLE('',#127738,2.5); +#127738 = AXIS2_PLACEMENT_3D('',#127739,#127740,#127741); +#127739 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127740 = DIRECTION('',(0.,1.,0.)); +#127741 = DIRECTION('',(0.,0.,-1.)); +#127742 = ORIENTED_EDGE('',*,*,#127743,.F.); +#127743 = EDGE_CURVE('',#122394,#127735,#127744,.T.); +#127744 = LINE('',#127745,#127746); +#127745 = CARTESIAN_POINT('',(0.,8.9,-2.25)); +#127746 = VECTOR('',#127747,1.); +#127747 = DIRECTION('',(0.,-1.,0.)); +#127748 = CYLINDRICAL_SURFACE('',#127749,2.5); +#127749 = AXIS2_PLACEMENT_3D('',#127750,#127751,#127752); +#127750 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#127751 = DIRECTION('',(0.,1.,0.)); +#127752 = DIRECTION('',(0.,0.,-1.)); +#127753 = ADVANCED_FACE('',(#127754),#127766,.F.); +#127754 = FACE_BOUND('',#127755,.F.); +#127755 = EDGE_LOOP('',(#127756,#127757,#127758,#127765)); +#127756 = ORIENTED_EDGE('',*,*,#122393,.F.); +#127757 = ORIENTED_EDGE('',*,*,#127743,.T.); +#127758 = ORIENTED_EDGE('',*,*,#127759,.T.); +#127759 = EDGE_CURVE('',#127735,#127727,#127760,.T.); +#127760 = CIRCLE('',#127761,2.5); +#127761 = AXIS2_PLACEMENT_3D('',#127762,#127763,#127764); +#127762 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127763 = DIRECTION('',(0.,1.,0.)); +#127764 = DIRECTION('',(0.,-0.,1.)); +#127765 = ORIENTED_EDGE('',*,*,#127726,.F.); +#127766 = CYLINDRICAL_SURFACE('',#127767,2.5); +#127767 = AXIS2_PLACEMENT_3D('',#127768,#127769,#127770); +#127768 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#127769 = DIRECTION('',(0.,1.,0.)); +#127770 = DIRECTION('',(0.,0.,-1.)); +#127771 = ADVANCED_FACE('',(#127772,#127776),#127796,.T.); +#127772 = FACE_BOUND('',#127773,.T.); +#127773 = EDGE_LOOP('',(#127774,#127775)); +#127774 = ORIENTED_EDGE('',*,*,#127759,.T.); +#127775 = ORIENTED_EDGE('',*,*,#127734,.T.); +#127776 = FACE_BOUND('',#127777,.T.); +#127777 = EDGE_LOOP('',(#127778,#127789)); +#127778 = ORIENTED_EDGE('',*,*,#127779,.F.); +#127779 = EDGE_CURVE('',#127780,#127782,#127784,.T.); +#127780 = VERTEX_POINT('',#127781); +#127781 = CARTESIAN_POINT('',(0.,8.5,-3.)); +#127782 = VERTEX_POINT('',#127783); +#127783 = CARTESIAN_POINT('',(0.,8.5,-6.5)); +#127784 = CIRCLE('',#127785,1.75); +#127785 = AXIS2_PLACEMENT_3D('',#127786,#127787,#127788); +#127786 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127787 = DIRECTION('',(0.,1.,0.)); +#127788 = DIRECTION('',(0.,-0.,1.)); +#127789 = ORIENTED_EDGE('',*,*,#127790,.F.); +#127790 = EDGE_CURVE('',#127782,#127780,#127791,.T.); +#127791 = CIRCLE('',#127792,1.75); +#127792 = AXIS2_PLACEMENT_3D('',#127793,#127794,#127795); +#127793 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127794 = DIRECTION('',(0.,1.,0.)); +#127795 = DIRECTION('',(0.,0.,-1.)); +#127796 = PLANE('',#127797); +#127797 = AXIS2_PLACEMENT_3D('',#127798,#127799,#127800); +#127798 = CARTESIAN_POINT('',(-4.75,8.5,0.)); +#127799 = DIRECTION('',(-0.,1.,0.)); +#127800 = DIRECTION('',(1.,0.,0.)); +#127801 = ADVANCED_FACE('',(#127802),#127828,.T.); +#127802 = FACE_BOUND('',#127803,.T.); +#127803 = EDGE_LOOP('',(#127804,#127812,#127821,#127827)); +#127804 = ORIENTED_EDGE('',*,*,#127805,.T.); +#127805 = EDGE_CURVE('',#127780,#127806,#127808,.T.); +#127806 = VERTEX_POINT('',#127807); +#127807 = CARTESIAN_POINT('',(0.,8.9,-3.)); +#127808 = LINE('',#127809,#127810); +#127809 = CARTESIAN_POINT('',(0.,8.5,-3.)); +#127810 = VECTOR('',#127811,1.); +#127811 = DIRECTION('',(0.,1.,0.)); +#127812 = ORIENTED_EDGE('',*,*,#127813,.F.); +#127813 = EDGE_CURVE('',#127814,#127806,#127816,.T.); +#127814 = VERTEX_POINT('',#127815); +#127815 = CARTESIAN_POINT('',(0.,8.9,-6.5)); +#127816 = CIRCLE('',#127817,1.75); +#127817 = AXIS2_PLACEMENT_3D('',#127818,#127819,#127820); +#127818 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#127819 = DIRECTION('',(0.,1.,0.)); +#127820 = DIRECTION('',(0.,0.,-1.)); +#127821 = ORIENTED_EDGE('',*,*,#127822,.F.); +#127822 = EDGE_CURVE('',#127782,#127814,#127823,.T.); +#127823 = LINE('',#127824,#127825); +#127824 = CARTESIAN_POINT('',(0.,8.5,-6.5)); +#127825 = VECTOR('',#127826,1.); +#127826 = DIRECTION('',(0.,1.,0.)); +#127827 = ORIENTED_EDGE('',*,*,#127790,.T.); +#127828 = CYLINDRICAL_SURFACE('',#127829,1.75); +#127829 = AXIS2_PLACEMENT_3D('',#127830,#127831,#127832); +#127830 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127831 = DIRECTION('',(0.,1.,0.)); +#127832 = DIRECTION('',(0.,0.,-1.)); +#127833 = ADVANCED_FACE('',(#127834),#127846,.T.); +#127834 = FACE_BOUND('',#127835,.T.); +#127835 = EDGE_LOOP('',(#127836,#127837,#127844,#127845)); +#127836 = ORIENTED_EDGE('',*,*,#127822,.T.); +#127837 = ORIENTED_EDGE('',*,*,#127838,.F.); +#127838 = EDGE_CURVE('',#127806,#127814,#127839,.T.); +#127839 = CIRCLE('',#127840,1.75); +#127840 = AXIS2_PLACEMENT_3D('',#127841,#127842,#127843); +#127841 = CARTESIAN_POINT('',(0.,8.9,-4.75)); +#127842 = DIRECTION('',(0.,1.,0.)); +#127843 = DIRECTION('',(0.,-0.,1.)); +#127844 = ORIENTED_EDGE('',*,*,#127805,.F.); +#127845 = ORIENTED_EDGE('',*,*,#127779,.T.); +#127846 = CYLINDRICAL_SURFACE('',#127847,1.75); +#127847 = AXIS2_PLACEMENT_3D('',#127848,#127849,#127850); +#127848 = CARTESIAN_POINT('',(0.,8.5,-4.75)); +#127849 = DIRECTION('',(0.,1.,0.)); +#127850 = DIRECTION('',(0.,0.,-1.)); +#127851 = ADVANCED_FACE('',(#127852,#127856),#127922,.T.); +#127852 = FACE_BOUND('',#127853,.T.); +#127853 = EDGE_LOOP('',(#127854,#127855)); +#127854 = ORIENTED_EDGE('',*,*,#127838,.T.); +#127855 = ORIENTED_EDGE('',*,*,#127813,.T.); +#127856 = FACE_BOUND('',#127857,.T.); +#127857 = EDGE_LOOP('',(#127858,#127868,#127876,#127884,#127892,#127900, + #127908,#127916)); +#127858 = ORIENTED_EDGE('',*,*,#127859,.F.); +#127859 = EDGE_CURVE('',#127860,#127862,#127864,.T.); +#127860 = VERTEX_POINT('',#127861); +#127861 = CARTESIAN_POINT('',(-0.52125,8.9,-6.2414)); +#127862 = VERTEX_POINT('',#127863); +#127863 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#127864 = LINE('',#127865,#127866); +#127865 = CARTESIAN_POINT('',(-0.52125,8.9,-6.2414)); +#127866 = VECTOR('',#127867,1.); +#127867 = DIRECTION('',(0.,0.,1.)); +#127868 = ORIENTED_EDGE('',*,*,#127869,.F.); +#127869 = EDGE_CURVE('',#127870,#127860,#127872,.T.); +#127870 = VERTEX_POINT('',#127871); +#127871 = CARTESIAN_POINT('',(0.52125,8.9,-6.2414)); +#127872 = LINE('',#127873,#127874); +#127873 = CARTESIAN_POINT('',(0.52125,8.9,-6.2414)); +#127874 = VECTOR('',#127875,1.); +#127875 = DIRECTION('',(-1.,0.,0.)); +#127876 = ORIENTED_EDGE('',*,*,#127877,.F.); +#127877 = EDGE_CURVE('',#127878,#127870,#127880,.T.); +#127878 = VERTEX_POINT('',#127879); +#127879 = CARTESIAN_POINT('',(0.52125,8.9,-5.5459)); +#127880 = LINE('',#127881,#127882); +#127881 = CARTESIAN_POINT('',(0.52125,8.9,-5.5459)); +#127882 = VECTOR('',#127883,1.); +#127883 = DIRECTION('',(0.,0.,-1.)); +#127884 = ORIENTED_EDGE('',*,*,#127885,.F.); +#127885 = EDGE_CURVE('',#127886,#127878,#127888,.T.); +#127886 = VERTEX_POINT('',#127887); +#127887 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#127888 = LINE('',#127889,#127890); +#127889 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#127890 = VECTOR('',#127891,1.); +#127891 = DIRECTION('',(0.,0.,-1.)); +#127892 = ORIENTED_EDGE('',*,*,#127893,.F.); +#127893 = EDGE_CURVE('',#127894,#127886,#127896,.T.); +#127894 = VERTEX_POINT('',#127895); +#127895 = CARTESIAN_POINT('',(0.52125,8.9,-3.2586)); +#127896 = LINE('',#127897,#127898); +#127897 = CARTESIAN_POINT('',(0.52125,8.9,-3.2586)); +#127898 = VECTOR('',#127899,1.); +#127899 = DIRECTION('',(0.,0.,-1.)); +#127900 = ORIENTED_EDGE('',*,*,#127901,.F.); +#127901 = EDGE_CURVE('',#127902,#127894,#127904,.T.); +#127902 = VERTEX_POINT('',#127903); +#127903 = CARTESIAN_POINT('',(-0.52125,8.9,-3.2586)); +#127904 = LINE('',#127905,#127906); +#127905 = CARTESIAN_POINT('',(-0.52125,8.9,-3.2586)); +#127906 = VECTOR('',#127907,1.); +#127907 = DIRECTION('',(1.,0.,0.)); +#127908 = ORIENTED_EDGE('',*,*,#127909,.F.); +#127909 = EDGE_CURVE('',#127910,#127902,#127912,.T.); +#127910 = VERTEX_POINT('',#127911); +#127911 = CARTESIAN_POINT('',(-0.52125,8.9,-3.9541)); +#127912 = LINE('',#127913,#127914); +#127913 = CARTESIAN_POINT('',(-0.52125,8.9,-3.9541)); +#127914 = VECTOR('',#127915,1.); +#127915 = DIRECTION('',(0.,0.,1.)); +#127916 = ORIENTED_EDGE('',*,*,#127917,.F.); +#127917 = EDGE_CURVE('',#127862,#127910,#127918,.T.); +#127918 = LINE('',#127919,#127920); +#127919 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#127920 = VECTOR('',#127921,1.); +#127921 = DIRECTION('',(0.,0.,1.)); +#127922 = PLANE('',#127923); +#127923 = AXIS2_PLACEMENT_3D('',#127924,#127925,#127926); +#127924 = CARTESIAN_POINT('',(-4.75,8.9,0.)); +#127925 = DIRECTION('',(-0.,1.,0.)); +#127926 = DIRECTION('',(1.,0.,0.)); +#127927 = ADVANCED_FACE('',(#127928),#127953,.F.); +#127928 = FACE_BOUND('',#127929,.T.); +#127929 = EDGE_LOOP('',(#127930,#127938,#127946,#127952)); +#127930 = ORIENTED_EDGE('',*,*,#127931,.T.); +#127931 = EDGE_CURVE('',#127910,#127932,#127934,.T.); +#127932 = VERTEX_POINT('',#127933); +#127933 = CARTESIAN_POINT('',(-0.52125,8.7,-3.9541)); +#127934 = LINE('',#127935,#127936); +#127935 = CARTESIAN_POINT('',(-0.52125,8.9,-3.9541)); +#127936 = VECTOR('',#127937,1.); +#127937 = DIRECTION('',(0.,-1.,0.)); +#127938 = ORIENTED_EDGE('',*,*,#127939,.F.); +#127939 = EDGE_CURVE('',#127940,#127932,#127942,.T.); +#127940 = VERTEX_POINT('',#127941); +#127941 = CARTESIAN_POINT('',(-0.52125,8.7,-5.5459)); +#127942 = LINE('',#127943,#127944); +#127943 = CARTESIAN_POINT('',(-0.52125,8.7,-5.5459)); +#127944 = VECTOR('',#127945,1.); +#127945 = DIRECTION('',(0.,0.,1.)); +#127946 = ORIENTED_EDGE('',*,*,#127947,.F.); +#127947 = EDGE_CURVE('',#127862,#127940,#127948,.T.); +#127948 = LINE('',#127949,#127950); +#127949 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#127950 = VECTOR('',#127951,1.); +#127951 = DIRECTION('',(0.,-1.,0.)); +#127952 = ORIENTED_EDGE('',*,*,#127917,.T.); +#127953 = PLANE('',#127954); +#127954 = AXIS2_PLACEMENT_3D('',#127955,#127956,#127957); +#127955 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#127956 = DIRECTION('',(-1.,0.,0.)); +#127957 = DIRECTION('',(0.,0.,1.)); +#127958 = ADVANCED_FACE('',(#127959),#127998,.T.); +#127959 = FACE_BOUND('',#127960,.T.); +#127960 = EDGE_LOOP('',(#127961,#127971,#127977,#127978,#127986,#127992) + ); +#127961 = ORIENTED_EDGE('',*,*,#127962,.F.); +#127962 = EDGE_CURVE('',#127963,#127965,#127967,.T.); +#127963 = VERTEX_POINT('',#127964); +#127964 = CARTESIAN_POINT('',(-0.52125,9.7,-5.5459)); +#127965 = VERTEX_POINT('',#127966); +#127966 = CARTESIAN_POINT('',(0.52125,9.7,-5.5459)); +#127967 = LINE('',#127968,#127969); +#127968 = CARTESIAN_POINT('',(-0.52125,9.7,-5.5459)); +#127969 = VECTOR('',#127970,1.); +#127970 = DIRECTION('',(1.,0.,0.)); +#127971 = ORIENTED_EDGE('',*,*,#127972,.F.); +#127972 = EDGE_CURVE('',#127862,#127963,#127973,.T.); +#127973 = LINE('',#127974,#127975); +#127974 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#127975 = VECTOR('',#127976,1.); +#127976 = DIRECTION('',(0.,1.,0.)); +#127977 = ORIENTED_EDGE('',*,*,#127947,.T.); +#127978 = ORIENTED_EDGE('',*,*,#127979,.F.); +#127979 = EDGE_CURVE('',#127980,#127940,#127982,.T.); +#127980 = VERTEX_POINT('',#127981); +#127981 = CARTESIAN_POINT('',(0.52125,8.7,-5.5459)); +#127982 = LINE('',#127983,#127984); +#127983 = CARTESIAN_POINT('',(0.52125,8.7,-5.5459)); +#127984 = VECTOR('',#127985,1.); +#127985 = DIRECTION('',(-1.,0.,0.)); +#127986 = ORIENTED_EDGE('',*,*,#127987,.F.); +#127987 = EDGE_CURVE('',#127878,#127980,#127988,.T.); +#127988 = LINE('',#127989,#127990); +#127989 = CARTESIAN_POINT('',(0.52125,8.9,-5.5459)); +#127990 = VECTOR('',#127991,1.); +#127991 = DIRECTION('',(0.,-1.,0.)); +#127992 = ORIENTED_EDGE('',*,*,#127993,.T.); +#127993 = EDGE_CURVE('',#127878,#127965,#127994,.T.); +#127994 = LINE('',#127995,#127996); +#127995 = CARTESIAN_POINT('',(0.52125,8.9,-5.5459)); +#127996 = VECTOR('',#127997,1.); +#127997 = DIRECTION('',(0.,1.,0.)); +#127998 = PLANE('',#127999); +#127999 = AXIS2_PLACEMENT_3D('',#128000,#128001,#128002); +#128000 = CARTESIAN_POINT('',(-0.52125,8.9,-5.5459)); +#128001 = DIRECTION('',(0.,0.,1.)); +#128002 = DIRECTION('',(1.,0.,-0.)); +#128003 = ADVANCED_FACE('',(#128004),#128030,.T.); +#128004 = FACE_BOUND('',#128005,.T.); +#128005 = EDGE_LOOP('',(#128006,#128014,#128022,#128028,#128029)); +#128006 = ORIENTED_EDGE('',*,*,#128007,.T.); +#128007 = EDGE_CURVE('',#127870,#128008,#128010,.T.); +#128008 = VERTEX_POINT('',#128009); +#128009 = CARTESIAN_POINT('',(0.52125,9.3,-6.2414)); +#128010 = LINE('',#128011,#128012); +#128011 = CARTESIAN_POINT('',(0.52125,8.9,-6.2414)); +#128012 = VECTOR('',#128013,1.); +#128013 = DIRECTION('',(0.,1.,0.)); +#128014 = ORIENTED_EDGE('',*,*,#128015,.T.); +#128015 = EDGE_CURVE('',#128008,#128016,#128018,.T.); +#128016 = VERTEX_POINT('',#128017); +#128017 = CARTESIAN_POINT('',(0.52125,9.7,-5.8414)); +#128018 = LINE('',#128019,#128020); +#128019 = CARTESIAN_POINT('',(0.52125,9.3,-6.2414)); +#128020 = VECTOR('',#128021,1.); +#128021 = DIRECTION('',(0.,0.707106781187,0.707106781187)); +#128022 = ORIENTED_EDGE('',*,*,#128023,.F.); +#128023 = EDGE_CURVE('',#127965,#128016,#128024,.T.); +#128024 = LINE('',#128025,#128026); +#128025 = CARTESIAN_POINT('',(0.52125,9.7,-5.5459)); +#128026 = VECTOR('',#128027,1.); +#128027 = DIRECTION('',(0.,0.,-1.)); +#128028 = ORIENTED_EDGE('',*,*,#127993,.F.); +#128029 = ORIENTED_EDGE('',*,*,#127877,.T.); +#128030 = PLANE('',#128031); +#128031 = AXIS2_PLACEMENT_3D('',#128032,#128033,#128034); +#128032 = CARTESIAN_POINT('',(0.52125,8.9,-5.5459)); +#128033 = DIRECTION('',(1.,0.,0.)); +#128034 = DIRECTION('',(-0.,1.,0.)); +#128035 = ADVANCED_FACE('',(#128036),#128070,.T.); +#128036 = FACE_BOUND('',#128037,.T.); +#128037 = EDGE_LOOP('',(#128038,#128048,#128056,#128064)); +#128038 = ORIENTED_EDGE('',*,*,#128039,.T.); +#128039 = EDGE_CURVE('',#128040,#128042,#128044,.T.); +#128040 = VERTEX_POINT('',#128041); +#128041 = CARTESIAN_POINT('',(0.52125,9.7,-3.6586)); +#128042 = VERTEX_POINT('',#128043); +#128043 = CARTESIAN_POINT('',(0.52125,9.7,-3.9541)); +#128044 = LINE('',#128045,#128046); +#128045 = CARTESIAN_POINT('',(0.52125,9.7,-3.6586)); +#128046 = VECTOR('',#128047,1.); +#128047 = DIRECTION('',(0.,0.,-1.)); +#128048 = ORIENTED_EDGE('',*,*,#128049,.T.); +#128049 = EDGE_CURVE('',#128042,#128050,#128052,.T.); +#128050 = VERTEX_POINT('',#128051); +#128051 = CARTESIAN_POINT('',(-0.52125,9.7,-3.9541)); +#128052 = LINE('',#128053,#128054); +#128053 = CARTESIAN_POINT('',(0.52125,9.7,-3.9541)); +#128054 = VECTOR('',#128055,1.); +#128055 = DIRECTION('',(-1.,0.,0.)); +#128056 = ORIENTED_EDGE('',*,*,#128057,.T.); +#128057 = EDGE_CURVE('',#128050,#128058,#128060,.T.); +#128058 = VERTEX_POINT('',#128059); +#128059 = CARTESIAN_POINT('',(-0.52125,9.7,-3.6586)); +#128060 = LINE('',#128061,#128062); +#128061 = CARTESIAN_POINT('',(-0.52125,9.7,-3.9541)); +#128062 = VECTOR('',#128063,1.); +#128063 = DIRECTION('',(0.,0.,1.)); +#128064 = ORIENTED_EDGE('',*,*,#128065,.T.); +#128065 = EDGE_CURVE('',#128058,#128040,#128066,.T.); +#128066 = LINE('',#128067,#128068); +#128067 = CARTESIAN_POINT('',(-0.52125,9.7,-3.6586)); +#128068 = VECTOR('',#128069,1.); +#128069 = DIRECTION('',(1.,0.,0.)); +#128070 = PLANE('',#128071); +#128071 = AXIS2_PLACEMENT_3D('',#128072,#128073,#128074); +#128072 = CARTESIAN_POINT('',(-4.75,9.7,0.)); +#128073 = DIRECTION('',(-0.,1.,0.)); +#128074 = DIRECTION('',(1.,0.,0.)); +#128075 = ADVANCED_FACE('',(#128076),#128094,.T.); +#128076 = FACE_BOUND('',#128077,.T.); +#128077 = EDGE_LOOP('',(#128078,#128086,#128087,#128088)); +#128078 = ORIENTED_EDGE('',*,*,#128079,.T.); +#128079 = EDGE_CURVE('',#128080,#127963,#128082,.T.); +#128080 = VERTEX_POINT('',#128081); +#128081 = CARTESIAN_POINT('',(-0.52125,9.7,-5.8414)); +#128082 = LINE('',#128083,#128084); +#128083 = CARTESIAN_POINT('',(-0.52125,9.7,-5.8414)); +#128084 = VECTOR('',#128085,1.); +#128085 = DIRECTION('',(0.,0.,1.)); +#128086 = ORIENTED_EDGE('',*,*,#127962,.T.); +#128087 = ORIENTED_EDGE('',*,*,#128023,.T.); +#128088 = ORIENTED_EDGE('',*,*,#128089,.T.); +#128089 = EDGE_CURVE('',#128016,#128080,#128090,.T.); +#128090 = LINE('',#128091,#128092); +#128091 = CARTESIAN_POINT('',(0.52125,9.7,-5.8414)); +#128092 = VECTOR('',#128093,1.); +#128093 = DIRECTION('',(-1.,0.,0.)); +#128094 = PLANE('',#128095); +#128095 = AXIS2_PLACEMENT_3D('',#128096,#128097,#128098); +#128096 = CARTESIAN_POINT('',(-4.75,9.7,0.)); +#128097 = DIRECTION('',(-0.,1.,0.)); +#128098 = DIRECTION('',(1.,0.,0.)); +#128099 = ADVANCED_FACE('',(#128100),#128125,.T.); +#128100 = FACE_BOUND('',#128101,.T.); +#128101 = EDGE_LOOP('',(#128102,#128103,#128111,#128119)); +#128102 = ORIENTED_EDGE('',*,*,#128065,.F.); +#128103 = ORIENTED_EDGE('',*,*,#128104,.F.); +#128104 = EDGE_CURVE('',#128105,#128058,#128107,.T.); +#128105 = VERTEX_POINT('',#128106); +#128106 = CARTESIAN_POINT('',(-0.52125,9.3,-3.2586)); +#128107 = LINE('',#128108,#128109); +#128108 = CARTESIAN_POINT('',(-0.52125,9.3,-3.2586)); +#128109 = VECTOR('',#128110,1.); +#128110 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#128111 = ORIENTED_EDGE('',*,*,#128112,.T.); +#128112 = EDGE_CURVE('',#128105,#128113,#128115,.T.); +#128113 = VERTEX_POINT('',#128114); +#128114 = CARTESIAN_POINT('',(0.52125,9.3,-3.2586)); +#128115 = LINE('',#128116,#128117); +#128116 = CARTESIAN_POINT('',(-0.52125,9.3,-3.2586)); +#128117 = VECTOR('',#128118,1.); +#128118 = DIRECTION('',(1.,0.,0.)); +#128119 = ORIENTED_EDGE('',*,*,#128120,.F.); +#128120 = EDGE_CURVE('',#128040,#128113,#128121,.T.); +#128121 = LINE('',#128122,#128123); +#128122 = CARTESIAN_POINT('',(0.52125,9.7,-3.6586)); +#128123 = VECTOR('',#128124,1.); +#128124 = DIRECTION('',(0.,-0.707106781187,0.707106781187)); +#128125 = PLANE('',#128126); +#128126 = AXIS2_PLACEMENT_3D('',#128127,#128128,#128129); +#128127 = CARTESIAN_POINT('',(0.,9.5,-3.4586)); +#128128 = DIRECTION('',(-0.,0.707106781187,0.707106781187)); +#128129 = DIRECTION('',(1.,0.,0.)); +#128130 = ADVANCED_FACE('',(#128131),#128148,.T.); +#128131 = FACE_BOUND('',#128132,.T.); +#128132 = EDGE_LOOP('',(#128133,#128139,#128140,#128141,#128147)); +#128133 = ORIENTED_EDGE('',*,*,#128134,.T.); +#128134 = EDGE_CURVE('',#127886,#128042,#128135,.T.); +#128135 = LINE('',#128136,#128137); +#128136 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#128137 = VECTOR('',#128138,1.); +#128138 = DIRECTION('',(0.,1.,0.)); +#128139 = ORIENTED_EDGE('',*,*,#128039,.F.); +#128140 = ORIENTED_EDGE('',*,*,#128120,.T.); +#128141 = ORIENTED_EDGE('',*,*,#128142,.F.); +#128142 = EDGE_CURVE('',#127894,#128113,#128143,.T.); +#128143 = LINE('',#128144,#128145); +#128144 = CARTESIAN_POINT('',(0.52125,8.9,-3.2586)); +#128145 = VECTOR('',#128146,1.); +#128146 = DIRECTION('',(0.,1.,0.)); +#128147 = ORIENTED_EDGE('',*,*,#127893,.T.); +#128148 = PLANE('',#128149); +#128149 = AXIS2_PLACEMENT_3D('',#128150,#128151,#128152); +#128150 = CARTESIAN_POINT('',(0.52125,8.9,-3.2586)); +#128151 = DIRECTION('',(1.,0.,0.)); +#128152 = DIRECTION('',(-0.,1.,0.)); +#128153 = ADVANCED_FACE('',(#128154),#128165,.T.); +#128154 = FACE_BOUND('',#128155,.T.); +#128155 = EDGE_LOOP('',(#128156,#128162,#128163,#128164)); +#128156 = ORIENTED_EDGE('',*,*,#128157,.F.); +#128157 = EDGE_CURVE('',#127902,#128105,#128158,.T.); +#128158 = LINE('',#128159,#128160); +#128159 = CARTESIAN_POINT('',(-0.52125,8.9,-3.2586)); +#128160 = VECTOR('',#128161,1.); +#128161 = DIRECTION('',(0.,1.,0.)); +#128162 = ORIENTED_EDGE('',*,*,#127901,.T.); +#128163 = ORIENTED_EDGE('',*,*,#128142,.T.); +#128164 = ORIENTED_EDGE('',*,*,#128112,.F.); +#128165 = PLANE('',#128166); +#128166 = AXIS2_PLACEMENT_3D('',#128167,#128168,#128169); +#128167 = CARTESIAN_POINT('',(-0.52125,8.9,-3.2586)); +#128168 = DIRECTION('',(0.,0.,1.)); +#128169 = DIRECTION('',(1.,0.,-0.)); +#128170 = ADVANCED_FACE('',(#128171),#128183,.T.); +#128171 = FACE_BOUND('',#128172,.T.); +#128172 = EDGE_LOOP('',(#128173,#128174,#128175,#128176,#128182)); +#128173 = ORIENTED_EDGE('',*,*,#128157,.T.); +#128174 = ORIENTED_EDGE('',*,*,#128104,.T.); +#128175 = ORIENTED_EDGE('',*,*,#128057,.F.); +#128176 = ORIENTED_EDGE('',*,*,#128177,.F.); +#128177 = EDGE_CURVE('',#127910,#128050,#128178,.T.); +#128178 = LINE('',#128179,#128180); +#128179 = CARTESIAN_POINT('',(-0.52125,8.9,-3.9541)); +#128180 = VECTOR('',#128181,1.); +#128181 = DIRECTION('',(0.,1.,0.)); +#128182 = ORIENTED_EDGE('',*,*,#127909,.T.); +#128183 = PLANE('',#128184); +#128184 = AXIS2_PLACEMENT_3D('',#128185,#128186,#128187); +#128185 = CARTESIAN_POINT('',(-0.52125,8.9,-3.9541)); +#128186 = DIRECTION('',(-1.,0.,0.)); +#128187 = DIRECTION('',(0.,0.,1.)); +#128188 = ADVANCED_FACE('',(#128189),#128209,.T.); +#128189 = FACE_BOUND('',#128190,.T.); +#128190 = EDGE_LOOP('',(#128191,#128192,#128193,#128201,#128207,#128208) + ); +#128191 = ORIENTED_EDGE('',*,*,#128049,.F.); +#128192 = ORIENTED_EDGE('',*,*,#128134,.F.); +#128193 = ORIENTED_EDGE('',*,*,#128194,.T.); +#128194 = EDGE_CURVE('',#127886,#128195,#128197,.T.); +#128195 = VERTEX_POINT('',#128196); +#128196 = CARTESIAN_POINT('',(0.52125,8.7,-3.9541)); +#128197 = LINE('',#128198,#128199); +#128198 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#128199 = VECTOR('',#128200,1.); +#128200 = DIRECTION('',(0.,-1.,0.)); +#128201 = ORIENTED_EDGE('',*,*,#128202,.F.); +#128202 = EDGE_CURVE('',#127932,#128195,#128203,.T.); +#128203 = LINE('',#128204,#128205); +#128204 = CARTESIAN_POINT('',(-0.52125,8.7,-3.9541)); +#128205 = VECTOR('',#128206,1.); +#128206 = DIRECTION('',(1.,0.,0.)); +#128207 = ORIENTED_EDGE('',*,*,#127931,.F.); +#128208 = ORIENTED_EDGE('',*,*,#128177,.T.); +#128209 = PLANE('',#128210); +#128210 = AXIS2_PLACEMENT_3D('',#128211,#128212,#128213); +#128211 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#128212 = DIRECTION('',(0.,0.,-1.)); +#128213 = DIRECTION('',(0.,-1.,0.)); +#128214 = ADVANCED_FACE('',(#128215),#128226,.T.); +#128215 = FACE_BOUND('',#128216,.T.); +#128216 = EDGE_LOOP('',(#128217,#128218,#128224,#128225)); +#128217 = ORIENTED_EDGE('',*,*,#128202,.T.); +#128218 = ORIENTED_EDGE('',*,*,#128219,.T.); +#128219 = EDGE_CURVE('',#128195,#127980,#128220,.T.); +#128220 = LINE('',#128221,#128222); +#128221 = CARTESIAN_POINT('',(0.52125,8.7,-3.9541)); +#128222 = VECTOR('',#128223,1.); +#128223 = DIRECTION('',(0.,0.,-1.)); +#128224 = ORIENTED_EDGE('',*,*,#127979,.T.); +#128225 = ORIENTED_EDGE('',*,*,#127939,.T.); +#128226 = PLANE('',#128227); +#128227 = AXIS2_PLACEMENT_3D('',#128228,#128229,#128230); +#128228 = CARTESIAN_POINT('',(-4.75,8.7,0.)); +#128229 = DIRECTION('',(-0.,1.,0.)); +#128230 = DIRECTION('',(1.,0.,0.)); +#128231 = ADVANCED_FACE('',(#128232),#128238,.F.); +#128232 = FACE_BOUND('',#128233,.T.); +#128233 = EDGE_LOOP('',(#128234,#128235,#128236,#128237)); +#128234 = ORIENTED_EDGE('',*,*,#127987,.T.); +#128235 = ORIENTED_EDGE('',*,*,#128219,.F.); +#128236 = ORIENTED_EDGE('',*,*,#128194,.F.); +#128237 = ORIENTED_EDGE('',*,*,#127885,.T.); +#128238 = PLANE('',#128239); +#128239 = AXIS2_PLACEMENT_3D('',#128240,#128241,#128242); +#128240 = CARTESIAN_POINT('',(0.52125,8.9,-3.9541)); +#128241 = DIRECTION('',(1.,0.,0.)); +#128242 = DIRECTION('',(-0.,1.,0.)); +#128243 = ADVANCED_FACE('',(#128244),#128262,.T.); +#128244 = FACE_BOUND('',#128245,.T.); +#128245 = EDGE_LOOP('',(#128246,#128247,#128248,#128256)); +#128246 = ORIENTED_EDGE('',*,*,#128089,.F.); +#128247 = ORIENTED_EDGE('',*,*,#128015,.F.); +#128248 = ORIENTED_EDGE('',*,*,#128249,.T.); +#128249 = EDGE_CURVE('',#128008,#128250,#128252,.T.); +#128250 = VERTEX_POINT('',#128251); +#128251 = CARTESIAN_POINT('',(-0.52125,9.3,-6.2414)); +#128252 = LINE('',#128253,#128254); +#128253 = CARTESIAN_POINT('',(0.52125,9.3,-6.2414)); +#128254 = VECTOR('',#128255,1.); +#128255 = DIRECTION('',(-1.,0.,0.)); +#128256 = ORIENTED_EDGE('',*,*,#128257,.F.); +#128257 = EDGE_CURVE('',#128080,#128250,#128258,.T.); +#128258 = LINE('',#128259,#128260); +#128259 = CARTESIAN_POINT('',(-0.52125,9.7,-5.8414)); +#128260 = VECTOR('',#128261,1.); +#128261 = DIRECTION('',(0.,-0.707106781187,-0.707106781187)); +#128262 = PLANE('',#128263); +#128263 = AXIS2_PLACEMENT_3D('',#128264,#128265,#128266); +#128264 = CARTESIAN_POINT('',(0.,9.5,-6.0414)); +#128265 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); +#128266 = DIRECTION('',(-1.,0.,0.)); +#128267 = ADVANCED_FACE('',(#128268),#128280,.T.); +#128268 = FACE_BOUND('',#128269,.T.); +#128269 = EDGE_LOOP('',(#128270,#128271,#128272,#128273,#128279)); +#128270 = ORIENTED_EDGE('',*,*,#127972,.T.); +#128271 = ORIENTED_EDGE('',*,*,#128079,.F.); +#128272 = ORIENTED_EDGE('',*,*,#128257,.T.); +#128273 = ORIENTED_EDGE('',*,*,#128274,.F.); +#128274 = EDGE_CURVE('',#127860,#128250,#128275,.T.); +#128275 = LINE('',#128276,#128277); +#128276 = CARTESIAN_POINT('',(-0.52125,8.9,-6.2414)); +#128277 = VECTOR('',#128278,1.); +#128278 = DIRECTION('',(0.,1.,0.)); +#128279 = ORIENTED_EDGE('',*,*,#127859,.T.); +#128280 = PLANE('',#128281); +#128281 = AXIS2_PLACEMENT_3D('',#128282,#128283,#128284); +#128282 = CARTESIAN_POINT('',(-0.52125,8.9,-6.2414)); +#128283 = DIRECTION('',(-1.,0.,0.)); +#128284 = DIRECTION('',(0.,0.,1.)); +#128285 = ADVANCED_FACE('',(#128286),#128292,.T.); +#128286 = FACE_BOUND('',#128287,.T.); +#128287 = EDGE_LOOP('',(#128288,#128289,#128290,#128291)); +#128288 = ORIENTED_EDGE('',*,*,#128007,.F.); +#128289 = ORIENTED_EDGE('',*,*,#127869,.T.); +#128290 = ORIENTED_EDGE('',*,*,#128274,.T.); +#128291 = ORIENTED_EDGE('',*,*,#128249,.F.); +#128292 = PLANE('',#128293); +#128293 = AXIS2_PLACEMENT_3D('',#128294,#128295,#128296); +#128294 = CARTESIAN_POINT('',(0.52125,8.9,-6.2414)); +#128295 = DIRECTION('',(0.,0.,-1.)); +#128296 = DIRECTION('',(0.,-1.,0.)); +#128297 = ADVANCED_FACE('',(#128298),#128358,.T.); +#128298 = FACE_BOUND('',#128299,.T.); +#128299 = EDGE_LOOP('',(#128300,#128301,#128307,#128308,#128316,#128324, + #128330,#128331,#128339,#128347,#128353,#128354,#128355,#128356, + #128357)); +#128300 = ORIENTED_EDGE('',*,*,#122276,.T.); +#128301 = ORIENTED_EDGE('',*,*,#128302,.T.); +#128302 = EDGE_CURVE('',#122268,#122002,#128303,.T.); +#128303 = LINE('',#128304,#128305); +#128304 = CARTESIAN_POINT('',(4.75,8.9,-2.5)); +#128305 = VECTOR('',#128306,1.); +#128306 = DIRECTION('',(0.,-1.,0.)); +#128307 = ORIENTED_EDGE('',*,*,#122001,.T.); +#128308 = ORIENTED_EDGE('',*,*,#128309,.T.); +#128309 = EDGE_CURVE('',#121994,#128310,#128312,.T.); +#128310 = VERTEX_POINT('',#128311); +#128311 = CARTESIAN_POINT('',(4.75,7.875,-2.6904)); +#128312 = LINE('',#128313,#128314); +#128313 = CARTESIAN_POINT('',(4.75,6.575,-2.6904)); +#128314 = VECTOR('',#128315,1.); +#128315 = DIRECTION('',(0.,1.,0.)); +#128316 = ORIENTED_EDGE('',*,*,#128317,.F.); +#128317 = EDGE_CURVE('',#128318,#128310,#128320,.T.); +#128318 = VERTEX_POINT('',#128319); +#128319 = CARTESIAN_POINT('',(4.75,7.875,-2.9904)); +#128320 = LINE('',#128321,#128322); +#128321 = CARTESIAN_POINT('',(4.75,7.875,-2.9904)); +#128322 = VECTOR('',#128323,1.); +#128323 = DIRECTION('',(0.,0.,1.)); +#128324 = ORIENTED_EDGE('',*,*,#128325,.F.); +#128325 = EDGE_CURVE('',#121970,#128318,#128326,.T.); +#128326 = LINE('',#128327,#128328); +#128327 = CARTESIAN_POINT('',(4.75,6.575,-2.9904)); +#128328 = VECTOR('',#128329,1.); +#128329 = DIRECTION('',(0.,1.,0.)); +#128330 = ORIENTED_EDGE('',*,*,#121969,.T.); +#128331 = ORIENTED_EDGE('',*,*,#128332,.T.); +#128332 = EDGE_CURVE('',#121962,#128333,#128335,.T.); +#128333 = VERTEX_POINT('',#128334); +#128334 = CARTESIAN_POINT('',(4.75,7.875,-6.5096)); +#128335 = LINE('',#128336,#128337); +#128336 = CARTESIAN_POINT('',(4.75,6.575,-6.5096)); +#128337 = VECTOR('',#128338,1.); +#128338 = DIRECTION('',(0.,1.,0.)); +#128339 = ORIENTED_EDGE('',*,*,#128340,.F.); +#128340 = EDGE_CURVE('',#128341,#128333,#128343,.T.); +#128341 = VERTEX_POINT('',#128342); +#128342 = CARTESIAN_POINT('',(4.75,7.875,-6.8096)); +#128343 = LINE('',#128344,#128345); +#128344 = CARTESIAN_POINT('',(4.75,7.875,-6.8096)); +#128345 = VECTOR('',#128346,1.); +#128346 = DIRECTION('',(0.,0.,1.)); +#128347 = ORIENTED_EDGE('',*,*,#128348,.F.); +#128348 = EDGE_CURVE('',#121938,#128341,#128349,.T.); +#128349 = LINE('',#128350,#128351); +#128350 = CARTESIAN_POINT('',(4.75,6.575,-6.8096)); +#128351 = VECTOR('',#128352,1.); +#128352 = DIRECTION('',(0.,1.,0.)); +#128353 = ORIENTED_EDGE('',*,*,#121937,.T.); +#128354 = ORIENTED_EDGE('',*,*,#121904,.T.); +#128355 = ORIENTED_EDGE('',*,*,#121880,.T.); +#128356 = ORIENTED_EDGE('',*,*,#121324,.T.); +#128357 = ORIENTED_EDGE('',*,*,#121302,.F.); +#128358 = PLANE('',#128359); +#128359 = AXIS2_PLACEMENT_3D('',#128360,#128361,#128362); +#128360 = CARTESIAN_POINT('',(4.75,0.,0.)); +#128361 = DIRECTION('',(1.,0.,0.)); +#128362 = DIRECTION('',(-0.,1.,0.)); +#128363 = ADVANCED_FACE('',(#128364),#128382,.F.); +#128364 = FACE_BOUND('',#128365,.T.); +#128365 = EDGE_LOOP('',(#128366,#128374,#128380,#128381)); +#128366 = ORIENTED_EDGE('',*,*,#128367,.T.); +#128367 = EDGE_CURVE('',#128341,#128368,#128370,.T.); +#128368 = VERTEX_POINT('',#128369); +#128369 = CARTESIAN_POINT('',(4.45,7.875,-6.8096)); +#128370 = LINE('',#128371,#128372); +#128371 = CARTESIAN_POINT('',(4.75,7.875,-6.8096)); +#128372 = VECTOR('',#128373,1.); +#128373 = DIRECTION('',(-1.,0.,0.)); +#128374 = ORIENTED_EDGE('',*,*,#128375,.F.); +#128375 = EDGE_CURVE('',#121946,#128368,#128376,.T.); +#128376 = LINE('',#128377,#128378); +#128377 = CARTESIAN_POINT('',(4.45,6.575,-6.8096)); +#128378 = VECTOR('',#128379,1.); +#128379 = DIRECTION('',(0.,1.,0.)); +#128380 = ORIENTED_EDGE('',*,*,#121945,.F.); +#128381 = ORIENTED_EDGE('',*,*,#128348,.T.); +#128382 = PLANE('',#128383); +#128383 = AXIS2_PLACEMENT_3D('',#128384,#128385,#128386); +#128384 = CARTESIAN_POINT('',(4.75,6.575,-6.8096)); +#128385 = DIRECTION('',(0.,0.,-1.)); +#128386 = DIRECTION('',(0.,-1.,0.)); +#128387 = ADVANCED_FACE('',(#128388),#128406,.T.); +#128388 = FACE_BOUND('',#128389,.T.); +#128389 = EDGE_LOOP('',(#128390,#128391,#128399,#128405)); +#128390 = ORIENTED_EDGE('',*,*,#128375,.T.); +#128391 = ORIENTED_EDGE('',*,*,#128392,.T.); +#128392 = EDGE_CURVE('',#128368,#128393,#128395,.T.); +#128393 = VERTEX_POINT('',#128394); +#128394 = CARTESIAN_POINT('',(4.45,7.875,-6.5096)); +#128395 = LINE('',#128396,#128397); +#128396 = CARTESIAN_POINT('',(4.45,7.875,-6.8096)); +#128397 = VECTOR('',#128398,1.); +#128398 = DIRECTION('',(0.,0.,1.)); +#128399 = ORIENTED_EDGE('',*,*,#128400,.T.); +#128400 = EDGE_CURVE('',#128393,#121954,#128401,.T.); +#128401 = LINE('',#128402,#128403); +#128402 = CARTESIAN_POINT('',(4.45,7.875,-6.5096)); +#128403 = VECTOR('',#128404,1.); +#128404 = DIRECTION('',(0.,-1.,0.)); +#128405 = ORIENTED_EDGE('',*,*,#121953,.F.); +#128406 = PLANE('',#128407); +#128407 = AXIS2_PLACEMENT_3D('',#128408,#128409,#128410); +#128408 = CARTESIAN_POINT('',(4.45,0.,0.)); +#128409 = DIRECTION('',(1.,0.,0.)); +#128410 = DIRECTION('',(-0.,1.,0.)); +#128411 = ADVANCED_FACE('',(#128412),#128437,.T.); +#128412 = FACE_BOUND('',#128413,.T.); +#128413 = EDGE_LOOP('',(#128414,#128422,#128430,#128436)); +#128414 = ORIENTED_EDGE('',*,*,#128415,.T.); +#128415 = EDGE_CURVE('',#121978,#128416,#128418,.T.); +#128416 = VERTEX_POINT('',#128417); +#128417 = CARTESIAN_POINT('',(4.45,7.875,-2.9904)); +#128418 = LINE('',#128419,#128420); +#128419 = CARTESIAN_POINT('',(4.45,6.575,-2.9904)); +#128420 = VECTOR('',#128421,1.); +#128421 = DIRECTION('',(0.,1.,0.)); +#128422 = ORIENTED_EDGE('',*,*,#128423,.T.); +#128423 = EDGE_CURVE('',#128416,#128424,#128426,.T.); +#128424 = VERTEX_POINT('',#128425); +#128425 = CARTESIAN_POINT('',(4.45,7.875,-2.6904)); +#128426 = LINE('',#128427,#128428); +#128427 = CARTESIAN_POINT('',(4.45,7.875,-2.9904)); +#128428 = VECTOR('',#128429,1.); +#128429 = DIRECTION('',(0.,0.,1.)); +#128430 = ORIENTED_EDGE('',*,*,#128431,.T.); +#128431 = EDGE_CURVE('',#128424,#121986,#128432,.T.); +#128432 = LINE('',#128433,#128434); +#128433 = CARTESIAN_POINT('',(4.45,7.875,-2.6904)); +#128434 = VECTOR('',#128435,1.); +#128435 = DIRECTION('',(0.,-1.,0.)); +#128436 = ORIENTED_EDGE('',*,*,#121985,.F.); +#128437 = PLANE('',#128438); +#128438 = AXIS2_PLACEMENT_3D('',#128439,#128440,#128441); +#128439 = CARTESIAN_POINT('',(4.45,0.,0.)); +#128440 = DIRECTION('',(1.,0.,0.)); +#128441 = DIRECTION('',(-0.,1.,0.)); +#128442 = ADVANCED_FACE('',(#128443),#128454,.F.); +#128443 = FACE_BOUND('',#128444,.T.); +#128444 = EDGE_LOOP('',(#128445,#128446,#128447,#128453)); +#128445 = ORIENTED_EDGE('',*,*,#121961,.T.); +#128446 = ORIENTED_EDGE('',*,*,#128400,.F.); +#128447 = ORIENTED_EDGE('',*,*,#128448,.F.); +#128448 = EDGE_CURVE('',#128333,#128393,#128449,.T.); +#128449 = LINE('',#128450,#128451); +#128450 = CARTESIAN_POINT('',(4.75,7.875,-6.5096)); +#128451 = VECTOR('',#128452,1.); +#128452 = DIRECTION('',(-1.,0.,0.)); +#128453 = ORIENTED_EDGE('',*,*,#128332,.F.); +#128454 = PLANE('',#128455); +#128455 = AXIS2_PLACEMENT_3D('',#128456,#128457,#128458); +#128456 = CARTESIAN_POINT('',(4.75,7.875,-6.5096)); +#128457 = DIRECTION('',(0.,0.,1.)); +#128458 = DIRECTION('',(1.,0.,-0.)); +#128459 = ADVANCED_FACE('',(#128460),#128466,.F.); +#128460 = FACE_BOUND('',#128461,.T.); +#128461 = EDGE_LOOP('',(#128462,#128463,#128464,#128465)); +#128462 = ORIENTED_EDGE('',*,*,#128448,.T.); +#128463 = ORIENTED_EDGE('',*,*,#128392,.F.); +#128464 = ORIENTED_EDGE('',*,*,#128367,.F.); +#128465 = ORIENTED_EDGE('',*,*,#128340,.T.); +#128466 = PLANE('',#128467); +#128467 = AXIS2_PLACEMENT_3D('',#128468,#128469,#128470); +#128468 = CARTESIAN_POINT('',(4.75,7.875,-6.8096)); +#128469 = DIRECTION('',(-0.,1.,0.)); +#128470 = DIRECTION('',(1.,0.,0.)); +#128471 = ADVANCED_FACE('',(#128472),#128483,.F.); +#128472 = FACE_BOUND('',#128473,.T.); +#128473 = EDGE_LOOP('',(#128474,#128475,#128476,#128482)); +#128474 = ORIENTED_EDGE('',*,*,#121993,.T.); +#128475 = ORIENTED_EDGE('',*,*,#128431,.F.); +#128476 = ORIENTED_EDGE('',*,*,#128477,.F.); +#128477 = EDGE_CURVE('',#128310,#128424,#128478,.T.); +#128478 = LINE('',#128479,#128480); +#128479 = CARTESIAN_POINT('',(4.75,7.875,-2.6904)); +#128480 = VECTOR('',#128481,1.); +#128481 = DIRECTION('',(-1.,0.,0.)); +#128482 = ORIENTED_EDGE('',*,*,#128309,.F.); +#128483 = PLANE('',#128484); +#128484 = AXIS2_PLACEMENT_3D('',#128485,#128486,#128487); +#128485 = CARTESIAN_POINT('',(4.75,7.875,-2.6904)); +#128486 = DIRECTION('',(0.,0.,1.)); +#128487 = DIRECTION('',(1.,0.,-0.)); +#128488 = ADVANCED_FACE('',(#128489),#128500,.F.); +#128489 = FACE_BOUND('',#128490,.T.); +#128490 = EDGE_LOOP('',(#128491,#128492,#128493,#128499)); +#128491 = ORIENTED_EDGE('',*,*,#128477,.T.); +#128492 = ORIENTED_EDGE('',*,*,#128423,.F.); +#128493 = ORIENTED_EDGE('',*,*,#128494,.F.); +#128494 = EDGE_CURVE('',#128318,#128416,#128495,.T.); +#128495 = LINE('',#128496,#128497); +#128496 = CARTESIAN_POINT('',(4.75,7.875,-2.9904)); +#128497 = VECTOR('',#128498,1.); +#128498 = DIRECTION('',(-1.,0.,0.)); +#128499 = ORIENTED_EDGE('',*,*,#128317,.T.); +#128500 = PLANE('',#128501); +#128501 = AXIS2_PLACEMENT_3D('',#128502,#128503,#128504); +#128502 = CARTESIAN_POINT('',(4.75,7.875,-2.9904)); +#128503 = DIRECTION('',(-0.,1.,0.)); +#128504 = DIRECTION('',(1.,0.,0.)); +#128505 = ADVANCED_FACE('',(#128506),#128512,.F.); +#128506 = FACE_BOUND('',#128507,.T.); +#128507 = EDGE_LOOP('',(#128508,#128509,#128510,#128511)); +#128508 = ORIENTED_EDGE('',*,*,#128494,.T.); +#128509 = ORIENTED_EDGE('',*,*,#128415,.F.); +#128510 = ORIENTED_EDGE('',*,*,#121977,.F.); +#128511 = ORIENTED_EDGE('',*,*,#128325,.T.); +#128512 = PLANE('',#128513); +#128513 = AXIS2_PLACEMENT_3D('',#128514,#128515,#128516); +#128514 = CARTESIAN_POINT('',(4.75,6.575,-2.9904)); +#128515 = DIRECTION('',(0.,0.,-1.)); +#128516 = DIRECTION('',(0.,-1.,0.)); +#128517 = ADVANCED_FACE('',(#128518),#128529,.T.); +#128518 = FACE_BOUND('',#128519,.T.); +#128519 = EDGE_LOOP('',(#128520,#128521,#128522,#128528)); +#128520 = ORIENTED_EDGE('',*,*,#128302,.F.); +#128521 = ORIENTED_EDGE('',*,*,#122267,.F.); +#128522 = ORIENTED_EDGE('',*,*,#128523,.T.); +#128523 = EDGE_CURVE('',#122260,#122010,#128524,.T.); +#128524 = LINE('',#128525,#128526); +#128525 = CARTESIAN_POINT('',(2.15,8.9,0.1)); +#128526 = VECTOR('',#128527,1.); +#128527 = DIRECTION('',(0.,-1.,0.)); +#128528 = ORIENTED_EDGE('',*,*,#122009,.F.); +#128529 = CYLINDRICAL_SURFACE('',#128530,2.6); +#128530 = AXIS2_PLACEMENT_3D('',#128531,#128532,#128533); +#128531 = CARTESIAN_POINT('',(2.15,12.26153,-2.5)); +#128532 = DIRECTION('',(0.,-1.,0.)); +#128533 = DIRECTION('',(1.,0.,0.)); +#128534 = ADVANCED_FACE('',(#128535),#128541,.T.); +#128535 = FACE_BOUND('',#128536,.T.); +#128536 = EDGE_LOOP('',(#128537,#128538,#128539,#128540)); +#128537 = ORIENTED_EDGE('',*,*,#122259,.F.); +#128538 = ORIENTED_EDGE('',*,*,#122235,.F.); +#128539 = ORIENTED_EDGE('',*,*,#122018,.T.); +#128540 = ORIENTED_EDGE('',*,*,#128523,.F.); +#128541 = PLANE('',#128542); +#128542 = AXIS2_PLACEMENT_3D('',#128543,#128544,#128545); +#128543 = CARTESIAN_POINT('',(-4.75,8.9,0.1)); +#128544 = DIRECTION('',(0.,0.,1.)); +#128545 = DIRECTION('',(1.,0.,-0.)); +#128546 = MANIFOLD_SOLID_BREP('',#128547); +#128547 = CLOSED_SHELL('',(#128548,#128676,#128707,#128802,#128833, + #128966,#128998,#129030,#129047,#129064,#129076,#129108,#129140, + #129157,#129174,#129186,#129217,#129250,#129267,#129284,#129296, + #129328,#129360,#129378,#129388,#129412,#129436,#129588,#129619, + #129650,#129667,#129684,#129696,#129713,#129730,#129742,#129767, + #129971,#130002,#130026,#130050,#130075,#130092,#130259,#130299, + #130339,#130920,#131088,#131240,#131328,#131416,#131438,#131450, + #131467,#131479,#131496,#131513,#131530,#131542,#131564,#131581, + #131598,#131615,#131627,#131658,#131682,#131706,#131730,#131754, + #131778,#131802,#131826,#131850,#131874,#131898,#131922,#131946, + #131970,#131994,#132018,#132042,#132066,#132090,#132114,#132138, + #132162,#132186,#132210,#132234,#132258,#132282,#132306,#132330, + #132354,#132378,#132402,#132426,#132450,#132474,#132498,#132522, + #132546,#132570,#132587,#132797,#133159,#133483,#133505,#133522, + #133539,#133556,#133573,#133590,#133607,#133624,#133641,#133658, + #133675,#133692,#133709,#133726,#133743,#133760,#133777,#133794, + #133811,#133823,#133845,#133862,#133879,#133896,#133913,#133930, + #133947,#133964,#133981,#133998,#134015,#134032,#134049,#134066, + #134083,#134100,#134117,#134134,#134151,#134168,#134185,#134202, + #134219,#134236,#134253,#134265,#134287,#134304,#134321,#134338, + #134355,#134372,#134389,#134406,#134423,#134440,#134457,#134474, + #134491,#134508,#134525,#134542,#134559,#134571,#134593,#134610, + #134627,#134644,#134661,#134678,#134695,#134712,#134729,#134746, + #134763,#134780,#134797,#134814,#134831,#134848,#134865,#134882, + #134894,#134916,#134933,#134950,#134967,#134984,#135001,#135018, + #135035,#135052,#135064,#135086,#135103,#135120,#135137,#135154, + #135171,#135188,#135205,#135222,#135234,#135266,#135284,#135314, + #135346,#135364,#135440,#135471,#135516,#135548,#135588,#135612, + #135643,#135666,#135683,#135701,#135727,#135744,#135756,#135780, + #135798,#135810,#135876,#135900,#135924,#135955,#135972,#135984, + #136001,#136018,#136030,#136047)); +#128548 = ADVANCED_FACE('',(#128549),#128671,.F.); +#128549 = FACE_BOUND('',#128550,.T.); +#128550 = EDGE_LOOP('',(#128551,#128561,#128569,#128577,#128585,#128593, + #128601,#128609,#128617,#128625,#128633,#128641,#128649,#128657, + #128665)); +#128551 = ORIENTED_EDGE('',*,*,#128552,.T.); +#128552 = EDGE_CURVE('',#128553,#128555,#128557,.T.); +#128553 = VERTEX_POINT('',#128554); +#128554 = CARTESIAN_POINT('',(8.9,4.75,-10.5)); +#128555 = VERTEX_POINT('',#128556); +#128556 = CARTESIAN_POINT('',(7.775,4.75,-10.5)); +#128557 = LINE('',#128558,#128559); +#128558 = CARTESIAN_POINT('',(8.9,4.75,-10.5)); +#128559 = VECTOR('',#128560,1.); +#128560 = DIRECTION('',(-1.,0.,0.)); +#128561 = ORIENTED_EDGE('',*,*,#128562,.F.); +#128562 = EDGE_CURVE('',#128563,#128555,#128565,.T.); +#128563 = VERTEX_POINT('',#128564); +#128564 = CARTESIAN_POINT('',(7.775,4.75,-8.6)); +#128565 = LINE('',#128566,#128567); +#128566 = CARTESIAN_POINT('',(7.775,4.75,-8.6)); +#128567 = VECTOR('',#128568,1.); +#128568 = DIRECTION('',(0.,0.,-1.)); +#128569 = ORIENTED_EDGE('',*,*,#128570,.F.); +#128570 = EDGE_CURVE('',#128571,#128563,#128573,.T.); +#128571 = VERTEX_POINT('',#128572); +#128572 = CARTESIAN_POINT('',(6.575,4.75,-8.6)); +#128573 = LINE('',#128574,#128575); +#128574 = CARTESIAN_POINT('',(6.575,4.75,-8.6)); +#128575 = VECTOR('',#128576,1.); +#128576 = DIRECTION('',(1.,0.,0.)); +#128577 = ORIENTED_EDGE('',*,*,#128578,.F.); +#128578 = EDGE_CURVE('',#128579,#128571,#128581,.T.); +#128579 = VERTEX_POINT('',#128580); +#128580 = CARTESIAN_POINT('',(6.575,4.75,-6.8096)); +#128581 = LINE('',#128582,#128583); +#128582 = CARTESIAN_POINT('',(6.575,4.75,-6.8096)); +#128583 = VECTOR('',#128584,1.); +#128584 = DIRECTION('',(0.,0.,-1.)); +#128585 = ORIENTED_EDGE('',*,*,#128586,.T.); +#128586 = EDGE_CURVE('',#128579,#128587,#128589,.T.); +#128587 = VERTEX_POINT('',#128588); +#128588 = CARTESIAN_POINT('',(7.875,4.75,-6.8096)); +#128589 = LINE('',#128590,#128591); +#128590 = CARTESIAN_POINT('',(6.575,4.75,-6.8096)); +#128591 = VECTOR('',#128592,1.); +#128592 = DIRECTION('',(1.,0.,0.)); +#128593 = ORIENTED_EDGE('',*,*,#128594,.T.); +#128594 = EDGE_CURVE('',#128587,#128595,#128597,.T.); +#128595 = VERTEX_POINT('',#128596); +#128596 = CARTESIAN_POINT('',(7.875,4.75,-6.5096)); +#128597 = LINE('',#128598,#128599); +#128598 = CARTESIAN_POINT('',(7.875,4.75,-6.8096)); +#128599 = VECTOR('',#128600,1.); +#128600 = DIRECTION('',(0.,0.,1.)); +#128601 = ORIENTED_EDGE('',*,*,#128602,.F.); +#128602 = EDGE_CURVE('',#128603,#128595,#128605,.T.); +#128603 = VERTEX_POINT('',#128604); +#128604 = CARTESIAN_POINT('',(6.575,4.75,-6.5096)); +#128605 = LINE('',#128606,#128607); +#128606 = CARTESIAN_POINT('',(6.575,4.75,-6.5096)); +#128607 = VECTOR('',#128608,1.); +#128608 = DIRECTION('',(1.,0.,0.)); +#128609 = ORIENTED_EDGE('',*,*,#128610,.F.); +#128610 = EDGE_CURVE('',#128611,#128603,#128613,.T.); +#128611 = VERTEX_POINT('',#128612); +#128612 = CARTESIAN_POINT('',(6.575,4.75,-2.9904)); +#128613 = LINE('',#128614,#128615); +#128614 = CARTESIAN_POINT('',(6.575,4.75,-2.9904)); +#128615 = VECTOR('',#128616,1.); +#128616 = DIRECTION('',(0.,0.,-1.)); +#128617 = ORIENTED_EDGE('',*,*,#128618,.T.); +#128618 = EDGE_CURVE('',#128611,#128619,#128621,.T.); +#128619 = VERTEX_POINT('',#128620); +#128620 = CARTESIAN_POINT('',(7.875,4.75,-2.9904)); +#128621 = LINE('',#128622,#128623); +#128622 = CARTESIAN_POINT('',(6.575,4.75,-2.9904)); +#128623 = VECTOR('',#128624,1.); +#128624 = DIRECTION('',(1.,0.,0.)); +#128625 = ORIENTED_EDGE('',*,*,#128626,.T.); +#128626 = EDGE_CURVE('',#128619,#128627,#128629,.T.); +#128627 = VERTEX_POINT('',#128628); +#128628 = CARTESIAN_POINT('',(7.875,4.75,-2.6904)); +#128629 = LINE('',#128630,#128631); +#128630 = CARTESIAN_POINT('',(7.875,4.75,-2.9904)); +#128631 = VECTOR('',#128632,1.); +#128632 = DIRECTION('',(0.,0.,1.)); +#128633 = ORIENTED_EDGE('',*,*,#128634,.F.); +#128634 = EDGE_CURVE('',#128635,#128627,#128637,.T.); +#128635 = VERTEX_POINT('',#128636); +#128636 = CARTESIAN_POINT('',(6.575,4.75,-2.6904)); +#128637 = LINE('',#128638,#128639); +#128638 = CARTESIAN_POINT('',(6.575,4.75,-2.6904)); +#128639 = VECTOR('',#128640,1.); +#128640 = DIRECTION('',(1.,0.,0.)); +#128641 = ORIENTED_EDGE('',*,*,#128642,.F.); +#128642 = EDGE_CURVE('',#128643,#128635,#128645,.T.); +#128643 = VERTEX_POINT('',#128644); +#128644 = CARTESIAN_POINT('',(6.575,4.75,-2.5)); +#128645 = LINE('',#128646,#128647); +#128646 = CARTESIAN_POINT('',(6.575,4.75,-2.5)); +#128647 = VECTOR('',#128648,1.); +#128648 = DIRECTION('',(0.,0.,-1.)); +#128649 = ORIENTED_EDGE('',*,*,#128650,.T.); +#128650 = EDGE_CURVE('',#128643,#128651,#128653,.T.); +#128651 = VERTEX_POINT('',#128652); +#128652 = CARTESIAN_POINT('',(8.9,4.75,-2.5)); +#128653 = LINE('',#128654,#128655); +#128654 = CARTESIAN_POINT('',(6.575,4.75,-2.5)); +#128655 = VECTOR('',#128656,1.); +#128656 = DIRECTION('',(1.,0.,0.)); +#128657 = ORIENTED_EDGE('',*,*,#128658,.F.); +#128658 = EDGE_CURVE('',#128659,#128651,#128661,.T.); +#128659 = VERTEX_POINT('',#128660); +#128660 = CARTESIAN_POINT('',(8.9,4.75,-8.3)); +#128661 = LINE('',#128662,#128663); +#128662 = CARTESIAN_POINT('',(8.9,4.75,-8.3)); +#128663 = VECTOR('',#128664,1.); +#128664 = DIRECTION('',(0.,0.,1.)); +#128665 = ORIENTED_EDGE('',*,*,#128666,.F.); +#128666 = EDGE_CURVE('',#128553,#128659,#128667,.T.); +#128667 = LINE('',#128668,#128669); +#128668 = CARTESIAN_POINT('',(8.9,4.75,-10.5)); +#128669 = VECTOR('',#128670,1.); +#128670 = DIRECTION('',(0.,0.,1.)); +#128671 = PLANE('',#128672); +#128672 = AXIS2_PLACEMENT_3D('',#128673,#128674,#128675); +#128673 = CARTESIAN_POINT('',(0.,4.75,0.)); +#128674 = DIRECTION('',(0.,-1.,0.)); +#128675 = DIRECTION('',(1.,0.,0.)); +#128676 = ADVANCED_FACE('',(#128677),#128702,.T.); +#128677 = FACE_BOUND('',#128678,.T.); +#128678 = EDGE_LOOP('',(#128679,#128689,#128695,#128696)); +#128679 = ORIENTED_EDGE('',*,*,#128680,.F.); +#128680 = EDGE_CURVE('',#128681,#128683,#128685,.T.); +#128681 = VERTEX_POINT('',#128682); +#128682 = CARTESIAN_POINT('',(9.4,4.25,-10.5)); +#128683 = VERTEX_POINT('',#128684); +#128684 = CARTESIAN_POINT('',(9.4,4.25,-8.3)); +#128685 = LINE('',#128686,#128687); +#128686 = CARTESIAN_POINT('',(9.4,4.25,-10.5)); +#128687 = VECTOR('',#128688,1.); +#128688 = DIRECTION('',(0.,0.,1.)); +#128689 = ORIENTED_EDGE('',*,*,#128690,.F.); +#128690 = EDGE_CURVE('',#128553,#128681,#128691,.T.); +#128691 = LINE('',#128692,#128693); +#128692 = CARTESIAN_POINT('',(8.9,4.75,-10.5)); +#128693 = VECTOR('',#128694,1.); +#128694 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#128695 = ORIENTED_EDGE('',*,*,#128666,.T.); +#128696 = ORIENTED_EDGE('',*,*,#128697,.F.); +#128697 = EDGE_CURVE('',#128683,#128659,#128698,.T.); +#128698 = LINE('',#128699,#128700); +#128699 = CARTESIAN_POINT('',(9.4,4.25,-8.3)); +#128700 = VECTOR('',#128701,1.); +#128701 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#128702 = PLANE('',#128703); +#128703 = AXIS2_PLACEMENT_3D('',#128704,#128705,#128706); +#128704 = CARTESIAN_POINT('',(9.15,4.5,-9.4)); +#128705 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#128706 = DIRECTION('',(0.,0.,1.)); +#128707 = ADVANCED_FACE('',(#128708),#128797,.T.); +#128708 = FACE_BOUND('',#128709,.T.); +#128709 = EDGE_LOOP('',(#128710,#128718,#128719,#128727,#128735,#128743, + #128751,#128759,#128767,#128775,#128783,#128791)); +#128710 = ORIENTED_EDGE('',*,*,#128711,.F.); +#128711 = EDGE_CURVE('',#128683,#128712,#128714,.T.); +#128712 = VERTEX_POINT('',#128713); +#128713 = CARTESIAN_POINT('',(9.4,-4.25,-8.3)); +#128714 = LINE('',#128715,#128716); +#128715 = CARTESIAN_POINT('',(9.4,4.25,-8.3)); +#128716 = VECTOR('',#128717,1.); +#128717 = DIRECTION('',(0.,-1.,0.)); +#128718 = ORIENTED_EDGE('',*,*,#128697,.T.); +#128719 = ORIENTED_EDGE('',*,*,#128720,.T.); +#128720 = EDGE_CURVE('',#128659,#128721,#128723,.T.); +#128721 = VERTEX_POINT('',#128722); +#128722 = CARTESIAN_POINT('',(8.9,3.55,-8.3)); +#128723 = LINE('',#128724,#128725); +#128724 = CARTESIAN_POINT('',(8.9,4.75,-8.3)); +#128725 = VECTOR('',#128726,1.); +#128726 = DIRECTION('',(0.,-1.,0.)); +#128727 = ORIENTED_EDGE('',*,*,#128728,.T.); +#128728 = EDGE_CURVE('',#128721,#128729,#128731,.T.); +#128729 = VERTEX_POINT('',#128730); +#128730 = CARTESIAN_POINT('',(8.5,3.55,-8.3)); +#128731 = LINE('',#128732,#128733); +#128732 = CARTESIAN_POINT('',(8.9,3.55,-8.3)); +#128733 = VECTOR('',#128734,1.); +#128734 = DIRECTION('',(-1.,0.,0.)); +#128735 = ORIENTED_EDGE('',*,*,#128736,.F.); +#128736 = EDGE_CURVE('',#128737,#128729,#128739,.T.); +#128737 = VERTEX_POINT('',#128738); +#128738 = CARTESIAN_POINT('',(8.5,1.,-8.3)); +#128739 = LINE('',#128740,#128741); +#128740 = CARTESIAN_POINT('',(8.5,1.,-8.3)); +#128741 = VECTOR('',#128742,1.); +#128742 = DIRECTION('',(0.,1.,0.)); +#128743 = ORIENTED_EDGE('',*,*,#128744,.F.); +#128744 = EDGE_CURVE('',#128745,#128737,#128747,.T.); +#128745 = VERTEX_POINT('',#128746); +#128746 = CARTESIAN_POINT('',(8.9,1.,-8.3)); +#128747 = LINE('',#128748,#128749); +#128748 = CARTESIAN_POINT('',(8.9,1.,-8.3)); +#128749 = VECTOR('',#128750,1.); +#128750 = DIRECTION('',(-1.,0.,0.)); +#128751 = ORIENTED_EDGE('',*,*,#128752,.T.); +#128752 = EDGE_CURVE('',#128745,#128753,#128755,.T.); +#128753 = VERTEX_POINT('',#128754); +#128754 = CARTESIAN_POINT('',(8.9,-1.,-8.3)); +#128755 = LINE('',#128756,#128757); +#128756 = CARTESIAN_POINT('',(8.9,1.,-8.3)); +#128757 = VECTOR('',#128758,1.); +#128758 = DIRECTION('',(0.,-1.,0.)); +#128759 = ORIENTED_EDGE('',*,*,#128760,.T.); +#128760 = EDGE_CURVE('',#128753,#128761,#128763,.T.); +#128761 = VERTEX_POINT('',#128762); +#128762 = CARTESIAN_POINT('',(8.5,-1.,-8.3)); +#128763 = LINE('',#128764,#128765); +#128764 = CARTESIAN_POINT('',(8.9,-1.,-8.3)); +#128765 = VECTOR('',#128766,1.); +#128766 = DIRECTION('',(-1.,0.,0.)); +#128767 = ORIENTED_EDGE('',*,*,#128768,.F.); +#128768 = EDGE_CURVE('',#128769,#128761,#128771,.T.); +#128769 = VERTEX_POINT('',#128770); +#128770 = CARTESIAN_POINT('',(8.5,-3.55,-8.3)); +#128771 = LINE('',#128772,#128773); +#128772 = CARTESIAN_POINT('',(8.5,-3.55,-8.3)); +#128773 = VECTOR('',#128774,1.); +#128774 = DIRECTION('',(0.,1.,0.)); +#128775 = ORIENTED_EDGE('',*,*,#128776,.F.); +#128776 = EDGE_CURVE('',#128777,#128769,#128779,.T.); +#128777 = VERTEX_POINT('',#128778); +#128778 = CARTESIAN_POINT('',(8.9,-3.55,-8.3)); +#128779 = LINE('',#128780,#128781); +#128780 = CARTESIAN_POINT('',(8.9,-3.55,-8.3)); +#128781 = VECTOR('',#128782,1.); +#128782 = DIRECTION('',(-1.,0.,0.)); +#128783 = ORIENTED_EDGE('',*,*,#128784,.T.); +#128784 = EDGE_CURVE('',#128777,#128785,#128787,.T.); +#128785 = VERTEX_POINT('',#128786); +#128786 = CARTESIAN_POINT('',(8.9,-4.75,-8.3)); +#128787 = LINE('',#128788,#128789); +#128788 = CARTESIAN_POINT('',(8.9,-3.55,-8.3)); +#128789 = VECTOR('',#128790,1.); +#128790 = DIRECTION('',(0.,-1.,0.)); +#128791 = ORIENTED_EDGE('',*,*,#128792,.T.); +#128792 = EDGE_CURVE('',#128785,#128712,#128793,.T.); +#128793 = LINE('',#128794,#128795); +#128794 = CARTESIAN_POINT('',(8.9,-4.75,-8.3)); +#128795 = VECTOR('',#128796,1.); +#128796 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#128797 = PLANE('',#128798); +#128798 = AXIS2_PLACEMENT_3D('',#128799,#128800,#128801); +#128799 = CARTESIAN_POINT('',(8.9,4.75,-8.3)); +#128800 = DIRECTION('',(0.,0.,1.)); +#128801 = DIRECTION('',(0.,-1.,0.)); +#128802 = ADVANCED_FACE('',(#128803),#128828,.T.); +#128803 = FACE_BOUND('',#128804,.T.); +#128804 = EDGE_LOOP('',(#128805,#128813,#128814,#128822)); +#128805 = ORIENTED_EDGE('',*,*,#128806,.F.); +#128806 = EDGE_CURVE('',#128712,#128807,#128809,.T.); +#128807 = VERTEX_POINT('',#128808); +#128808 = CARTESIAN_POINT('',(9.4,-4.25,-10.5)); +#128809 = LINE('',#128810,#128811); +#128810 = CARTESIAN_POINT('',(9.4,-4.25,-8.3)); +#128811 = VECTOR('',#128812,1.); +#128812 = DIRECTION('',(0.,0.,-1.)); +#128813 = ORIENTED_EDGE('',*,*,#128792,.F.); +#128814 = ORIENTED_EDGE('',*,*,#128815,.T.); +#128815 = EDGE_CURVE('',#128785,#128816,#128818,.T.); +#128816 = VERTEX_POINT('',#128817); +#128817 = CARTESIAN_POINT('',(8.9,-4.75,-10.5)); +#128818 = LINE('',#128819,#128820); +#128819 = CARTESIAN_POINT('',(8.9,-4.75,-8.3)); +#128820 = VECTOR('',#128821,1.); +#128821 = DIRECTION('',(0.,0.,-1.)); +#128822 = ORIENTED_EDGE('',*,*,#128823,.F.); +#128823 = EDGE_CURVE('',#128807,#128816,#128824,.T.); +#128824 = LINE('',#128825,#128826); +#128825 = CARTESIAN_POINT('',(9.4,-4.25,-10.5)); +#128826 = VECTOR('',#128827,1.); +#128827 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#128828 = PLANE('',#128829); +#128829 = AXIS2_PLACEMENT_3D('',#128830,#128831,#128832); +#128830 = CARTESIAN_POINT('',(9.15,-4.5,-9.4)); +#128831 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#128832 = DIRECTION('',(0.,0.,-1.)); +#128833 = ADVANCED_FACE('',(#128834,#128859,#128893,#128927),#128961,.T. + ); +#128834 = FACE_BOUND('',#128835,.T.); +#128835 = EDGE_LOOP('',(#128836,#128844,#128850,#128851,#128852,#128858) + ); +#128836 = ORIENTED_EDGE('',*,*,#128837,.F.); +#128837 = EDGE_CURVE('',#128838,#128816,#128840,.T.); +#128838 = VERTEX_POINT('',#128839); +#128839 = CARTESIAN_POINT('',(7.775,-4.75,-10.5)); +#128840 = LINE('',#128841,#128842); +#128841 = CARTESIAN_POINT('',(7.775,-4.75,-10.5)); +#128842 = VECTOR('',#128843,1.); +#128843 = DIRECTION('',(1.,0.,0.)); +#128844 = ORIENTED_EDGE('',*,*,#128845,.F.); +#128845 = EDGE_CURVE('',#128555,#128838,#128846,.T.); +#128846 = LINE('',#128847,#128848); +#128847 = CARTESIAN_POINT('',(7.775,4.75,-10.5)); +#128848 = VECTOR('',#128849,1.); +#128849 = DIRECTION('',(0.,-1.,0.)); +#128850 = ORIENTED_EDGE('',*,*,#128552,.F.); +#128851 = ORIENTED_EDGE('',*,*,#128690,.T.); +#128852 = ORIENTED_EDGE('',*,*,#128853,.F.); +#128853 = EDGE_CURVE('',#128807,#128681,#128854,.T.); +#128854 = LINE('',#128855,#128856); +#128855 = CARTESIAN_POINT('',(9.4,-4.25,-10.5)); +#128856 = VECTOR('',#128857,1.); +#128857 = DIRECTION('',(0.,1.,0.)); +#128858 = ORIENTED_EDGE('',*,*,#128823,.T.); +#128859 = FACE_BOUND('',#128860,.T.); +#128860 = EDGE_LOOP('',(#128861,#128871,#128879,#128887)); +#128861 = ORIENTED_EDGE('',*,*,#128862,.F.); +#128862 = EDGE_CURVE('',#128863,#128865,#128867,.T.); +#128863 = VERTEX_POINT('',#128864); +#128864 = CARTESIAN_POINT('',(8.605,0.4,-10.5)); +#128865 = VERTEX_POINT('',#128866); +#128866 = CARTESIAN_POINT('',(8.855,0.4,-10.5)); +#128867 = LINE('',#128868,#128869); +#128868 = CARTESIAN_POINT('',(8.605,0.4,-10.5)); +#128869 = VECTOR('',#128870,1.); +#128870 = DIRECTION('',(1.,0.,0.)); +#128871 = ORIENTED_EDGE('',*,*,#128872,.F.); +#128872 = EDGE_CURVE('',#128873,#128863,#128875,.T.); +#128873 = VERTEX_POINT('',#128874); +#128874 = CARTESIAN_POINT('',(8.605,-0.4,-10.5)); +#128875 = LINE('',#128876,#128877); +#128876 = CARTESIAN_POINT('',(8.605,-0.4,-10.5)); +#128877 = VECTOR('',#128878,1.); +#128878 = DIRECTION('',(0.,1.,0.)); +#128879 = ORIENTED_EDGE('',*,*,#128880,.F.); +#128880 = EDGE_CURVE('',#128881,#128873,#128883,.T.); +#128881 = VERTEX_POINT('',#128882); +#128882 = CARTESIAN_POINT('',(8.855,-0.4,-10.5)); +#128883 = LINE('',#128884,#128885); +#128884 = CARTESIAN_POINT('',(8.855,-0.4,-10.5)); +#128885 = VECTOR('',#128886,1.); +#128886 = DIRECTION('',(-1.,0.,0.)); +#128887 = ORIENTED_EDGE('',*,*,#128888,.F.); +#128888 = EDGE_CURVE('',#128865,#128881,#128889,.T.); +#128889 = LINE('',#128890,#128891); +#128890 = CARTESIAN_POINT('',(8.855,0.4,-10.5)); +#128891 = VECTOR('',#128892,1.); +#128892 = DIRECTION('',(0.,-1.,0.)); +#128893 = FACE_BOUND('',#128894,.T.); +#128894 = EDGE_LOOP('',(#128895,#128905,#128913,#128921)); +#128895 = ORIENTED_EDGE('',*,*,#128896,.F.); +#128896 = EDGE_CURVE('',#128897,#128899,#128901,.T.); +#128897 = VERTEX_POINT('',#128898); +#128898 = CARTESIAN_POINT('',(8.855,-2.1,-10.5)); +#128899 = VERTEX_POINT('',#128900); +#128900 = CARTESIAN_POINT('',(8.855,-2.9,-10.5)); +#128901 = LINE('',#128902,#128903); +#128902 = CARTESIAN_POINT('',(8.855,-2.1,-10.5)); +#128903 = VECTOR('',#128904,1.); +#128904 = DIRECTION('',(0.,-1.,0.)); +#128905 = ORIENTED_EDGE('',*,*,#128906,.F.); +#128906 = EDGE_CURVE('',#128907,#128897,#128909,.T.); +#128907 = VERTEX_POINT('',#128908); +#128908 = CARTESIAN_POINT('',(8.605,-2.1,-10.5)); +#128909 = LINE('',#128910,#128911); +#128910 = CARTESIAN_POINT('',(8.605,-2.1,-10.5)); +#128911 = VECTOR('',#128912,1.); +#128912 = DIRECTION('',(1.,0.,0.)); +#128913 = ORIENTED_EDGE('',*,*,#128914,.F.); +#128914 = EDGE_CURVE('',#128915,#128907,#128917,.T.); +#128915 = VERTEX_POINT('',#128916); +#128916 = CARTESIAN_POINT('',(8.605,-2.9,-10.5)); +#128917 = LINE('',#128918,#128919); +#128918 = CARTESIAN_POINT('',(8.605,-2.9,-10.5)); +#128919 = VECTOR('',#128920,1.); +#128920 = DIRECTION('',(0.,1.,0.)); +#128921 = ORIENTED_EDGE('',*,*,#128922,.F.); +#128922 = EDGE_CURVE('',#128899,#128915,#128923,.T.); +#128923 = LINE('',#128924,#128925); +#128924 = CARTESIAN_POINT('',(8.855,-2.9,-10.5)); +#128925 = VECTOR('',#128926,1.); +#128926 = DIRECTION('',(-1.,0.,0.)); +#128927 = FACE_BOUND('',#128928,.T.); +#128928 = EDGE_LOOP('',(#128929,#128939,#128947,#128955)); +#128929 = ORIENTED_EDGE('',*,*,#128930,.F.); +#128930 = EDGE_CURVE('',#128931,#128933,#128935,.T.); +#128931 = VERTEX_POINT('',#128932); +#128932 = CARTESIAN_POINT('',(8.605,2.9,-10.5)); +#128933 = VERTEX_POINT('',#128934); +#128934 = CARTESIAN_POINT('',(8.855,2.9,-10.5)); +#128935 = LINE('',#128936,#128937); +#128936 = CARTESIAN_POINT('',(8.605,2.9,-10.5)); +#128937 = VECTOR('',#128938,1.); +#128938 = DIRECTION('',(1.,0.,0.)); +#128939 = ORIENTED_EDGE('',*,*,#128940,.F.); +#128940 = EDGE_CURVE('',#128941,#128931,#128943,.T.); +#128941 = VERTEX_POINT('',#128942); +#128942 = CARTESIAN_POINT('',(8.605,2.1,-10.5)); +#128943 = LINE('',#128944,#128945); +#128944 = CARTESIAN_POINT('',(8.605,2.1,-10.5)); +#128945 = VECTOR('',#128946,1.); +#128946 = DIRECTION('',(0.,1.,0.)); +#128947 = ORIENTED_EDGE('',*,*,#128948,.F.); +#128948 = EDGE_CURVE('',#128949,#128941,#128951,.T.); +#128949 = VERTEX_POINT('',#128950); +#128950 = CARTESIAN_POINT('',(8.855,2.1,-10.5)); +#128951 = LINE('',#128952,#128953); +#128952 = CARTESIAN_POINT('',(8.855,2.1,-10.5)); +#128953 = VECTOR('',#128954,1.); +#128954 = DIRECTION('',(-1.,0.,0.)); +#128955 = ORIENTED_EDGE('',*,*,#128956,.F.); +#128956 = EDGE_CURVE('',#128933,#128949,#128957,.T.); +#128957 = LINE('',#128958,#128959); +#128958 = CARTESIAN_POINT('',(8.855,2.9,-10.5)); +#128959 = VECTOR('',#128960,1.); +#128960 = DIRECTION('',(0.,-1.,0.)); +#128961 = PLANE('',#128962); +#128962 = AXIS2_PLACEMENT_3D('',#128963,#128964,#128965); +#128963 = CARTESIAN_POINT('',(7.775,4.75,-10.5)); +#128964 = DIRECTION('',(0.,0.,-1.)); +#128965 = DIRECTION('',(-1.,0.,0.)); +#128966 = ADVANCED_FACE('',(#128967),#128993,.T.); +#128967 = FACE_BOUND('',#128968,.T.); +#128968 = EDGE_LOOP('',(#128969,#128977,#128978,#128986)); +#128969 = ORIENTED_EDGE('',*,*,#128970,.F.); +#128970 = EDGE_CURVE('',#128933,#128971,#128973,.T.); +#128971 = VERTEX_POINT('',#128972); +#128972 = CARTESIAN_POINT('',(8.855,2.9,-13.2)); +#128973 = LINE('',#128974,#128975); +#128974 = CARTESIAN_POINT('',(8.855,2.9,-10.5)); +#128975 = VECTOR('',#128976,1.); +#128976 = DIRECTION('',(0.,0.,-1.)); +#128977 = ORIENTED_EDGE('',*,*,#128956,.T.); +#128978 = ORIENTED_EDGE('',*,*,#128979,.T.); +#128979 = EDGE_CURVE('',#128949,#128980,#128982,.T.); +#128980 = VERTEX_POINT('',#128981); +#128981 = CARTESIAN_POINT('',(8.855,2.1,-13.2)); +#128982 = LINE('',#128983,#128984); +#128983 = CARTESIAN_POINT('',(8.855,2.1,-10.5)); +#128984 = VECTOR('',#128985,1.); +#128985 = DIRECTION('',(0.,0.,-1.)); +#128986 = ORIENTED_EDGE('',*,*,#128987,.T.); +#128987 = EDGE_CURVE('',#128980,#128971,#128988,.T.); +#128988 = CIRCLE('',#128989,0.4); +#128989 = AXIS2_PLACEMENT_3D('',#128990,#128991,#128992); +#128990 = CARTESIAN_POINT('',(8.855,2.5,-13.2)); +#128991 = DIRECTION('',(1.,0.,0.)); +#128992 = DIRECTION('',(0.,-1.,0.)); +#128993 = PLANE('',#128994); +#128994 = AXIS2_PLACEMENT_3D('',#128995,#128996,#128997); +#128995 = CARTESIAN_POINT('',(8.855,2.9,-10.5)); +#128996 = DIRECTION('',(1.,0.,0.)); +#128997 = DIRECTION('',(0.,-1.,0.)); +#128998 = ADVANCED_FACE('',(#128999),#129025,.T.); +#128999 = FACE_BOUND('',#129000,.T.); +#129000 = EDGE_LOOP('',(#129001,#129009,#129018,#129024)); +#129001 = ORIENTED_EDGE('',*,*,#129002,.F.); +#129002 = EDGE_CURVE('',#129003,#128980,#129005,.T.); +#129003 = VERTEX_POINT('',#129004); +#129004 = CARTESIAN_POINT('',(8.605,2.1,-13.2)); +#129005 = LINE('',#129006,#129007); +#129006 = CARTESIAN_POINT('',(8.605,2.1,-13.2)); +#129007 = VECTOR('',#129008,1.); +#129008 = DIRECTION('',(1.,0.,0.)); +#129009 = ORIENTED_EDGE('',*,*,#129010,.F.); +#129010 = EDGE_CURVE('',#129011,#129003,#129013,.T.); +#129011 = VERTEX_POINT('',#129012); +#129012 = CARTESIAN_POINT('',(8.605,2.9,-13.2)); +#129013 = CIRCLE('',#129014,0.4); +#129014 = AXIS2_PLACEMENT_3D('',#129015,#129016,#129017); +#129015 = CARTESIAN_POINT('',(8.605,2.5,-13.2)); +#129016 = DIRECTION('',(-1.,0.,0.)); +#129017 = DIRECTION('',(0.,1.,0.)); +#129018 = ORIENTED_EDGE('',*,*,#129019,.T.); +#129019 = EDGE_CURVE('',#129011,#128971,#129020,.T.); +#129020 = LINE('',#129021,#129022); +#129021 = CARTESIAN_POINT('',(8.605,2.9,-13.2)); +#129022 = VECTOR('',#129023,1.); +#129023 = DIRECTION('',(1.,0.,0.)); +#129024 = ORIENTED_EDGE('',*,*,#128987,.F.); +#129025 = CYLINDRICAL_SURFACE('',#129026,0.4); +#129026 = AXIS2_PLACEMENT_3D('',#129027,#129028,#129029); +#129027 = CARTESIAN_POINT('',(2.50125,2.5,-13.2)); +#129028 = DIRECTION('',(1.,0.,0.)); +#129029 = DIRECTION('',(-0.,1.,0.)); +#129030 = ADVANCED_FACE('',(#129031),#129042,.T.); +#129031 = FACE_BOUND('',#129032,.T.); +#129032 = EDGE_LOOP('',(#129033,#129039,#129040,#129041)); +#129033 = ORIENTED_EDGE('',*,*,#129034,.F.); +#129034 = EDGE_CURVE('',#128931,#129011,#129035,.T.); +#129035 = LINE('',#129036,#129037); +#129036 = CARTESIAN_POINT('',(8.605,2.9,-10.5)); +#129037 = VECTOR('',#129038,1.); +#129038 = DIRECTION('',(0.,0.,-1.)); +#129039 = ORIENTED_EDGE('',*,*,#128930,.T.); +#129040 = ORIENTED_EDGE('',*,*,#128970,.T.); +#129041 = ORIENTED_EDGE('',*,*,#129019,.F.); +#129042 = PLANE('',#129043); +#129043 = AXIS2_PLACEMENT_3D('',#129044,#129045,#129046); +#129044 = CARTESIAN_POINT('',(8.605,2.9,-10.5)); +#129045 = DIRECTION('',(0.,1.,0.)); +#129046 = DIRECTION('',(0.,-0.,1.)); +#129047 = ADVANCED_FACE('',(#129048),#129059,.T.); +#129048 = FACE_BOUND('',#129049,.T.); +#129049 = EDGE_LOOP('',(#129050,#129056,#129057,#129058)); +#129050 = ORIENTED_EDGE('',*,*,#129051,.F.); +#129051 = EDGE_CURVE('',#128941,#129003,#129052,.T.); +#129052 = LINE('',#129053,#129054); +#129053 = CARTESIAN_POINT('',(8.605,2.1,-10.5)); +#129054 = VECTOR('',#129055,1.); +#129055 = DIRECTION('',(0.,0.,-1.)); +#129056 = ORIENTED_EDGE('',*,*,#128940,.T.); +#129057 = ORIENTED_EDGE('',*,*,#129034,.T.); +#129058 = ORIENTED_EDGE('',*,*,#129010,.T.); +#129059 = PLANE('',#129060); +#129060 = AXIS2_PLACEMENT_3D('',#129061,#129062,#129063); +#129061 = CARTESIAN_POINT('',(8.605,2.1,-10.5)); +#129062 = DIRECTION('',(-1.,0.,0.)); +#129063 = DIRECTION('',(0.,0.,-1.)); +#129064 = ADVANCED_FACE('',(#129065),#129071,.T.); +#129065 = FACE_BOUND('',#129066,.T.); +#129066 = EDGE_LOOP('',(#129067,#129068,#129069,#129070)); +#129067 = ORIENTED_EDGE('',*,*,#128979,.F.); +#129068 = ORIENTED_EDGE('',*,*,#128948,.T.); +#129069 = ORIENTED_EDGE('',*,*,#129051,.T.); +#129070 = ORIENTED_EDGE('',*,*,#129002,.T.); +#129071 = PLANE('',#129072); +#129072 = AXIS2_PLACEMENT_3D('',#129073,#129074,#129075); +#129073 = CARTESIAN_POINT('',(8.855,2.1,-10.5)); +#129074 = DIRECTION('',(0.,-1.,0.)); +#129075 = DIRECTION('',(1.,0.,0.)); +#129076 = ADVANCED_FACE('',(#129077),#129103,.T.); +#129077 = FACE_BOUND('',#129078,.T.); +#129078 = EDGE_LOOP('',(#129079,#129087,#129088,#129096)); +#129079 = ORIENTED_EDGE('',*,*,#129080,.F.); +#129080 = EDGE_CURVE('',#128865,#129081,#129083,.T.); +#129081 = VERTEX_POINT('',#129082); +#129082 = CARTESIAN_POINT('',(8.855,0.4,-13.2)); +#129083 = LINE('',#129084,#129085); +#129084 = CARTESIAN_POINT('',(8.855,0.4,-10.5)); +#129085 = VECTOR('',#129086,1.); +#129086 = DIRECTION('',(0.,0.,-1.)); +#129087 = ORIENTED_EDGE('',*,*,#128888,.T.); +#129088 = ORIENTED_EDGE('',*,*,#129089,.T.); +#129089 = EDGE_CURVE('',#128881,#129090,#129092,.T.); +#129090 = VERTEX_POINT('',#129091); +#129091 = CARTESIAN_POINT('',(8.855,-0.4,-13.2)); +#129092 = LINE('',#129093,#129094); +#129093 = CARTESIAN_POINT('',(8.855,-0.4,-10.5)); +#129094 = VECTOR('',#129095,1.); +#129095 = DIRECTION('',(0.,0.,-1.)); +#129096 = ORIENTED_EDGE('',*,*,#129097,.T.); +#129097 = EDGE_CURVE('',#129090,#129081,#129098,.T.); +#129098 = CIRCLE('',#129099,0.4); +#129099 = AXIS2_PLACEMENT_3D('',#129100,#129101,#129102); +#129100 = CARTESIAN_POINT('',(8.855,0.,-13.2)); +#129101 = DIRECTION('',(1.,0.,0.)); +#129102 = DIRECTION('',(0.,-1.,0.)); +#129103 = PLANE('',#129104); +#129104 = AXIS2_PLACEMENT_3D('',#129105,#129106,#129107); +#129105 = CARTESIAN_POINT('',(8.855,0.4,-10.5)); +#129106 = DIRECTION('',(1.,0.,0.)); +#129107 = DIRECTION('',(0.,-1.,0.)); +#129108 = ADVANCED_FACE('',(#129109),#129135,.T.); +#129109 = FACE_BOUND('',#129110,.T.); +#129110 = EDGE_LOOP('',(#129111,#129119,#129128,#129134)); +#129111 = ORIENTED_EDGE('',*,*,#129112,.F.); +#129112 = EDGE_CURVE('',#129113,#129090,#129115,.T.); +#129113 = VERTEX_POINT('',#129114); +#129114 = CARTESIAN_POINT('',(8.605,-0.4,-13.2)); +#129115 = LINE('',#129116,#129117); +#129116 = CARTESIAN_POINT('',(8.605,-0.4,-13.2)); +#129117 = VECTOR('',#129118,1.); +#129118 = DIRECTION('',(1.,0.,0.)); +#129119 = ORIENTED_EDGE('',*,*,#129120,.F.); +#129120 = EDGE_CURVE('',#129121,#129113,#129123,.T.); +#129121 = VERTEX_POINT('',#129122); +#129122 = CARTESIAN_POINT('',(8.605,0.4,-13.2)); +#129123 = CIRCLE('',#129124,0.4); +#129124 = AXIS2_PLACEMENT_3D('',#129125,#129126,#129127); +#129125 = CARTESIAN_POINT('',(8.605,0.,-13.2)); +#129126 = DIRECTION('',(-1.,0.,0.)); +#129127 = DIRECTION('',(0.,1.,0.)); +#129128 = ORIENTED_EDGE('',*,*,#129129,.T.); +#129129 = EDGE_CURVE('',#129121,#129081,#129130,.T.); +#129130 = LINE('',#129131,#129132); +#129131 = CARTESIAN_POINT('',(8.605,0.4,-13.2)); +#129132 = VECTOR('',#129133,1.); +#129133 = DIRECTION('',(1.,0.,0.)); +#129134 = ORIENTED_EDGE('',*,*,#129097,.F.); +#129135 = CYLINDRICAL_SURFACE('',#129136,0.4); +#129136 = AXIS2_PLACEMENT_3D('',#129137,#129138,#129139); +#129137 = CARTESIAN_POINT('',(2.50125,0.,-13.2)); +#129138 = DIRECTION('',(1.,0.,0.)); +#129139 = DIRECTION('',(-0.,1.,0.)); +#129140 = ADVANCED_FACE('',(#129141),#129152,.T.); +#129141 = FACE_BOUND('',#129142,.T.); +#129142 = EDGE_LOOP('',(#129143,#129149,#129150,#129151)); +#129143 = ORIENTED_EDGE('',*,*,#129144,.F.); +#129144 = EDGE_CURVE('',#128863,#129121,#129145,.T.); +#129145 = LINE('',#129146,#129147); +#129146 = CARTESIAN_POINT('',(8.605,0.4,-10.5)); +#129147 = VECTOR('',#129148,1.); +#129148 = DIRECTION('',(0.,0.,-1.)); +#129149 = ORIENTED_EDGE('',*,*,#128862,.T.); +#129150 = ORIENTED_EDGE('',*,*,#129080,.T.); +#129151 = ORIENTED_EDGE('',*,*,#129129,.F.); +#129152 = PLANE('',#129153); +#129153 = AXIS2_PLACEMENT_3D('',#129154,#129155,#129156); +#129154 = CARTESIAN_POINT('',(8.605,0.4,-10.5)); +#129155 = DIRECTION('',(0.,1.,0.)); +#129156 = DIRECTION('',(0.,-0.,1.)); +#129157 = ADVANCED_FACE('',(#129158),#129169,.T.); +#129158 = FACE_BOUND('',#129159,.T.); +#129159 = EDGE_LOOP('',(#129160,#129166,#129167,#129168)); +#129160 = ORIENTED_EDGE('',*,*,#129161,.F.); +#129161 = EDGE_CURVE('',#128873,#129113,#129162,.T.); +#129162 = LINE('',#129163,#129164); +#129163 = CARTESIAN_POINT('',(8.605,-0.4,-10.5)); +#129164 = VECTOR('',#129165,1.); +#129165 = DIRECTION('',(0.,0.,-1.)); +#129166 = ORIENTED_EDGE('',*,*,#128872,.T.); +#129167 = ORIENTED_EDGE('',*,*,#129144,.T.); +#129168 = ORIENTED_EDGE('',*,*,#129120,.T.); +#129169 = PLANE('',#129170); +#129170 = AXIS2_PLACEMENT_3D('',#129171,#129172,#129173); +#129171 = CARTESIAN_POINT('',(8.605,-0.4,-10.5)); +#129172 = DIRECTION('',(-1.,0.,0.)); +#129173 = DIRECTION('',(0.,0.,-1.)); +#129174 = ADVANCED_FACE('',(#129175),#129181,.T.); +#129175 = FACE_BOUND('',#129176,.T.); +#129176 = EDGE_LOOP('',(#129177,#129178,#129179,#129180)); +#129177 = ORIENTED_EDGE('',*,*,#129089,.F.); +#129178 = ORIENTED_EDGE('',*,*,#128880,.T.); +#129179 = ORIENTED_EDGE('',*,*,#129161,.T.); +#129180 = ORIENTED_EDGE('',*,*,#129112,.T.); +#129181 = PLANE('',#129182); +#129182 = AXIS2_PLACEMENT_3D('',#129183,#129184,#129185); +#129183 = CARTESIAN_POINT('',(8.855,-0.4,-10.5)); +#129184 = DIRECTION('',(0.,-1.,0.)); +#129185 = DIRECTION('',(1.,0.,0.)); +#129186 = ADVANCED_FACE('',(#129187),#129212,.T.); +#129187 = FACE_BOUND('',#129188,.T.); +#129188 = EDGE_LOOP('',(#129189,#129197,#129198,#129206)); +#129189 = ORIENTED_EDGE('',*,*,#129190,.F.); +#129190 = EDGE_CURVE('',#128899,#129191,#129193,.T.); +#129191 = VERTEX_POINT('',#129192); +#129192 = CARTESIAN_POINT('',(8.855,-2.9,-13.2)); +#129193 = LINE('',#129194,#129195); +#129194 = CARTESIAN_POINT('',(8.855,-2.9,-10.5)); +#129195 = VECTOR('',#129196,1.); +#129196 = DIRECTION('',(0.,0.,-1.)); +#129197 = ORIENTED_EDGE('',*,*,#128922,.T.); +#129198 = ORIENTED_EDGE('',*,*,#129199,.T.); +#129199 = EDGE_CURVE('',#128915,#129200,#129202,.T.); +#129200 = VERTEX_POINT('',#129201); +#129201 = CARTESIAN_POINT('',(8.605,-2.9,-13.2)); +#129202 = LINE('',#129203,#129204); +#129203 = CARTESIAN_POINT('',(8.605,-2.9,-10.5)); +#129204 = VECTOR('',#129205,1.); +#129205 = DIRECTION('',(0.,0.,-1.)); +#129206 = ORIENTED_EDGE('',*,*,#129207,.F.); +#129207 = EDGE_CURVE('',#129191,#129200,#129208,.T.); +#129208 = LINE('',#129209,#129210); +#129209 = CARTESIAN_POINT('',(8.855,-2.9,-13.2)); +#129210 = VECTOR('',#129211,1.); +#129211 = DIRECTION('',(-1.,0.,0.)); +#129212 = PLANE('',#129213); +#129213 = AXIS2_PLACEMENT_3D('',#129214,#129215,#129216); +#129214 = CARTESIAN_POINT('',(8.855,-2.9,-10.5)); +#129215 = DIRECTION('',(0.,-1.,0.)); +#129216 = DIRECTION('',(1.,0.,0.)); +#129217 = ADVANCED_FACE('',(#129218),#129245,.T.); +#129218 = FACE_BOUND('',#129219,.T.); +#129219 = EDGE_LOOP('',(#129220,#129230,#129237,#129238)); +#129220 = ORIENTED_EDGE('',*,*,#129221,.F.); +#129221 = EDGE_CURVE('',#129222,#129224,#129226,.T.); +#129222 = VERTEX_POINT('',#129223); +#129223 = CARTESIAN_POINT('',(8.855,-2.1,-13.2)); +#129224 = VERTEX_POINT('',#129225); +#129225 = CARTESIAN_POINT('',(8.605,-2.1,-13.2)); +#129226 = LINE('',#129227,#129228); +#129227 = CARTESIAN_POINT('',(8.855,-2.1,-13.2)); +#129228 = VECTOR('',#129229,1.); +#129229 = DIRECTION('',(-1.,0.,0.)); +#129230 = ORIENTED_EDGE('',*,*,#129231,.F.); +#129231 = EDGE_CURVE('',#129191,#129222,#129232,.T.); +#129232 = CIRCLE('',#129233,0.4); +#129233 = AXIS2_PLACEMENT_3D('',#129234,#129235,#129236); +#129234 = CARTESIAN_POINT('',(8.855,-2.5,-13.2)); +#129235 = DIRECTION('',(1.,0.,0.)); +#129236 = DIRECTION('',(0.,-1.,0.)); +#129237 = ORIENTED_EDGE('',*,*,#129207,.T.); +#129238 = ORIENTED_EDGE('',*,*,#129239,.F.); +#129239 = EDGE_CURVE('',#129224,#129200,#129240,.T.); +#129240 = CIRCLE('',#129241,0.4); +#129241 = AXIS2_PLACEMENT_3D('',#129242,#129243,#129244); +#129242 = CARTESIAN_POINT('',(8.605,-2.5,-13.2)); +#129243 = DIRECTION('',(-1.,0.,0.)); +#129244 = DIRECTION('',(0.,1.,0.)); +#129245 = CYLINDRICAL_SURFACE('',#129246,0.4); +#129246 = AXIS2_PLACEMENT_3D('',#129247,#129248,#129249); +#129247 = CARTESIAN_POINT('',(13.77375,-2.5,-13.2)); +#129248 = DIRECTION('',(-1.,0.,0.)); +#129249 = DIRECTION('',(0.,-1.,0.)); +#129250 = ADVANCED_FACE('',(#129251),#129262,.T.); +#129251 = FACE_BOUND('',#129252,.T.); +#129252 = EDGE_LOOP('',(#129253,#129254,#129255,#129261)); +#129253 = ORIENTED_EDGE('',*,*,#129199,.F.); +#129254 = ORIENTED_EDGE('',*,*,#128914,.T.); +#129255 = ORIENTED_EDGE('',*,*,#129256,.T.); +#129256 = EDGE_CURVE('',#128907,#129224,#129257,.T.); +#129257 = LINE('',#129258,#129259); +#129258 = CARTESIAN_POINT('',(8.605,-2.1,-10.5)); +#129259 = VECTOR('',#129260,1.); +#129260 = DIRECTION('',(0.,0.,-1.)); +#129261 = ORIENTED_EDGE('',*,*,#129239,.T.); +#129262 = PLANE('',#129263); +#129263 = AXIS2_PLACEMENT_3D('',#129264,#129265,#129266); +#129264 = CARTESIAN_POINT('',(8.605,-2.9,-10.5)); +#129265 = DIRECTION('',(-1.,0.,0.)); +#129266 = DIRECTION('',(0.,0.,-1.)); +#129267 = ADVANCED_FACE('',(#129268),#129279,.T.); +#129268 = FACE_BOUND('',#129269,.T.); +#129269 = EDGE_LOOP('',(#129270,#129271,#129272,#129278)); +#129270 = ORIENTED_EDGE('',*,*,#129256,.F.); +#129271 = ORIENTED_EDGE('',*,*,#128906,.T.); +#129272 = ORIENTED_EDGE('',*,*,#129273,.T.); +#129273 = EDGE_CURVE('',#128897,#129222,#129274,.T.); +#129274 = LINE('',#129275,#129276); +#129275 = CARTESIAN_POINT('',(8.855,-2.1,-10.5)); +#129276 = VECTOR('',#129277,1.); +#129277 = DIRECTION('',(0.,0.,-1.)); +#129278 = ORIENTED_EDGE('',*,*,#129221,.T.); +#129279 = PLANE('',#129280); +#129280 = AXIS2_PLACEMENT_3D('',#129281,#129282,#129283); +#129281 = CARTESIAN_POINT('',(8.605,-2.1,-10.5)); +#129282 = DIRECTION('',(0.,1.,0.)); +#129283 = DIRECTION('',(0.,-0.,1.)); +#129284 = ADVANCED_FACE('',(#129285),#129291,.T.); +#129285 = FACE_BOUND('',#129286,.T.); +#129286 = EDGE_LOOP('',(#129287,#129288,#129289,#129290)); +#129287 = ORIENTED_EDGE('',*,*,#129273,.F.); +#129288 = ORIENTED_EDGE('',*,*,#128896,.T.); +#129289 = ORIENTED_EDGE('',*,*,#129190,.T.); +#129290 = ORIENTED_EDGE('',*,*,#129231,.T.); +#129291 = PLANE('',#129292); +#129292 = AXIS2_PLACEMENT_3D('',#129293,#129294,#129295); +#129293 = CARTESIAN_POINT('',(8.855,-2.1,-10.5)); +#129294 = DIRECTION('',(1.,0.,0.)); +#129295 = DIRECTION('',(0.,-1.,0.)); +#129296 = ADVANCED_FACE('',(#129297,#129303),#129323,.T.); +#129297 = FACE_BOUND('',#129298,.T.); +#129298 = EDGE_LOOP('',(#129299,#129300,#129301,#129302)); +#129299 = ORIENTED_EDGE('',*,*,#128853,.T.); +#129300 = ORIENTED_EDGE('',*,*,#128680,.T.); +#129301 = ORIENTED_EDGE('',*,*,#128711,.T.); +#129302 = ORIENTED_EDGE('',*,*,#128806,.T.); +#129303 = FACE_BOUND('',#129304,.T.); +#129304 = EDGE_LOOP('',(#129305,#129316)); +#129305 = ORIENTED_EDGE('',*,*,#129306,.F.); +#129306 = EDGE_CURVE('',#129307,#129309,#129311,.T.); +#129307 = VERTEX_POINT('',#129308); +#129308 = CARTESIAN_POINT('',(9.4,0.,-8.66725)); +#129309 = VERTEX_POINT('',#129310); +#129310 = CARTESIAN_POINT('',(9.4,0.,-10.16015)); +#129311 = CIRCLE('',#129312,0.74645); +#129312 = AXIS2_PLACEMENT_3D('',#129313,#129314,#129315); +#129313 = CARTESIAN_POINT('',(9.4,0.,-9.4137)); +#129314 = DIRECTION('',(1.,0.,-0.)); +#129315 = DIRECTION('',(0.,0.,1.)); +#129316 = ORIENTED_EDGE('',*,*,#129317,.F.); +#129317 = EDGE_CURVE('',#129309,#129307,#129318,.T.); +#129318 = CIRCLE('',#129319,0.74645); +#129319 = AXIS2_PLACEMENT_3D('',#129320,#129321,#129322); +#129320 = CARTESIAN_POINT('',(9.4,0.,-9.4137)); +#129321 = DIRECTION('',(1.,0.,0.)); +#129322 = DIRECTION('',(0.,0.,-1.)); +#129323 = PLANE('',#129324); +#129324 = AXIS2_PLACEMENT_3D('',#129325,#129326,#129327); +#129325 = CARTESIAN_POINT('',(9.4,4.75,0.)); +#129326 = DIRECTION('',(1.,0.,0.)); +#129327 = DIRECTION('',(0.,-1.,0.)); +#129328 = ADVANCED_FACE('',(#129329),#129355,.F.); +#129329 = FACE_BOUND('',#129330,.F.); +#129330 = EDGE_LOOP('',(#129331,#129332,#129340,#129349)); +#129331 = ORIENTED_EDGE('',*,*,#129317,.F.); +#129332 = ORIENTED_EDGE('',*,*,#129333,.T.); +#129333 = EDGE_CURVE('',#129309,#129334,#129336,.T.); +#129334 = VERTEX_POINT('',#129335); +#129335 = CARTESIAN_POINT('',(9.2,0.,-10.16015)); +#129336 = LINE('',#129337,#129338); +#129337 = CARTESIAN_POINT('',(9.4,0.,-10.16015)); +#129338 = VECTOR('',#129339,1.); +#129339 = DIRECTION('',(-1.,0.,0.)); +#129340 = ORIENTED_EDGE('',*,*,#129341,.T.); +#129341 = EDGE_CURVE('',#129334,#129342,#129344,.T.); +#129342 = VERTEX_POINT('',#129343); +#129343 = CARTESIAN_POINT('',(9.2,0.,-8.66725)); +#129344 = CIRCLE('',#129345,0.74645); +#129345 = AXIS2_PLACEMENT_3D('',#129346,#129347,#129348); +#129346 = CARTESIAN_POINT('',(9.2,0.,-9.4137)); +#129347 = DIRECTION('',(1.,0.,0.)); +#129348 = DIRECTION('',(0.,0.,-1.)); +#129349 = ORIENTED_EDGE('',*,*,#129350,.F.); +#129350 = EDGE_CURVE('',#129307,#129342,#129351,.T.); +#129351 = LINE('',#129352,#129353); +#129352 = CARTESIAN_POINT('',(9.4,0.,-8.66725)); +#129353 = VECTOR('',#129354,1.); +#129354 = DIRECTION('',(-1.,0.,0.)); +#129355 = CYLINDRICAL_SURFACE('',#129356,0.74645); +#129356 = AXIS2_PLACEMENT_3D('',#129357,#129358,#129359); +#129357 = CARTESIAN_POINT('',(9.4,0.,-9.4137)); +#129358 = DIRECTION('',(1.,0.,0.)); +#129359 = DIRECTION('',(0.,0.,-1.)); +#129360 = ADVANCED_FACE('',(#129361),#129373,.F.); +#129361 = FACE_BOUND('',#129362,.F.); +#129362 = EDGE_LOOP('',(#129363,#129364,#129365,#129372)); +#129363 = ORIENTED_EDGE('',*,*,#129306,.F.); +#129364 = ORIENTED_EDGE('',*,*,#129350,.T.); +#129365 = ORIENTED_EDGE('',*,*,#129366,.T.); +#129366 = EDGE_CURVE('',#129342,#129334,#129367,.T.); +#129367 = CIRCLE('',#129368,0.74645); +#129368 = AXIS2_PLACEMENT_3D('',#129369,#129370,#129371); +#129369 = CARTESIAN_POINT('',(9.2,0.,-9.4137)); +#129370 = DIRECTION('',(1.,0.,-0.)); +#129371 = DIRECTION('',(0.,0.,1.)); +#129372 = ORIENTED_EDGE('',*,*,#129333,.F.); +#129373 = CYLINDRICAL_SURFACE('',#129374,0.74645); +#129374 = AXIS2_PLACEMENT_3D('',#129375,#129376,#129377); +#129375 = CARTESIAN_POINT('',(9.4,0.,-9.4137)); +#129376 = DIRECTION('',(1.,0.,0.)); +#129377 = DIRECTION('',(0.,0.,-1.)); +#129378 = ADVANCED_FACE('',(#129379),#129383,.T.); +#129379 = FACE_BOUND('',#129380,.T.); +#129380 = EDGE_LOOP('',(#129381,#129382)); +#129381 = ORIENTED_EDGE('',*,*,#129366,.T.); +#129382 = ORIENTED_EDGE('',*,*,#129341,.T.); +#129383 = PLANE('',#129384); +#129384 = AXIS2_PLACEMENT_3D('',#129385,#129386,#129387); +#129385 = CARTESIAN_POINT('',(9.2,4.75,0.)); +#129386 = DIRECTION('',(1.,0.,0.)); +#129387 = DIRECTION('',(0.,-1.,0.)); +#129388 = ADVANCED_FACE('',(#129389),#129407,.T.); +#129389 = FACE_BOUND('',#129390,.T.); +#129390 = EDGE_LOOP('',(#129391,#129392,#129400,#129406)); +#129391 = ORIENTED_EDGE('',*,*,#128845,.T.); +#129392 = ORIENTED_EDGE('',*,*,#129393,.F.); +#129393 = EDGE_CURVE('',#129394,#128838,#129396,.T.); +#129394 = VERTEX_POINT('',#129395); +#129395 = CARTESIAN_POINT('',(7.775,-4.75,-8.6)); +#129396 = LINE('',#129397,#129398); +#129397 = CARTESIAN_POINT('',(7.775,-4.75,-8.6)); +#129398 = VECTOR('',#129399,1.); +#129399 = DIRECTION('',(0.,0.,-1.)); +#129400 = ORIENTED_EDGE('',*,*,#129401,.F.); +#129401 = EDGE_CURVE('',#128563,#129394,#129402,.T.); +#129402 = LINE('',#129403,#129404); +#129403 = CARTESIAN_POINT('',(7.775,4.75,-8.6)); +#129404 = VECTOR('',#129405,1.); +#129405 = DIRECTION('',(0.,-1.,0.)); +#129406 = ORIENTED_EDGE('',*,*,#128562,.T.); +#129407 = PLANE('',#129408); +#129408 = AXIS2_PLACEMENT_3D('',#129409,#129410,#129411); +#129409 = CARTESIAN_POINT('',(7.775,4.75,-8.6)); +#129410 = DIRECTION('',(-1.,0.,0.)); +#129411 = DIRECTION('',(0.,0.,-1.)); +#129412 = ADVANCED_FACE('',(#129413),#129431,.T.); +#129413 = FACE_BOUND('',#129414,.T.); +#129414 = EDGE_LOOP('',(#129415,#129416,#129424,#129430)); +#129415 = ORIENTED_EDGE('',*,*,#129401,.T.); +#129416 = ORIENTED_EDGE('',*,*,#129417,.F.); +#129417 = EDGE_CURVE('',#129418,#129394,#129420,.T.); +#129418 = VERTEX_POINT('',#129419); +#129419 = CARTESIAN_POINT('',(6.575,-4.75,-8.6)); +#129420 = LINE('',#129421,#129422); +#129421 = CARTESIAN_POINT('',(6.575,-4.75,-8.6)); +#129422 = VECTOR('',#129423,1.); +#129423 = DIRECTION('',(1.,0.,0.)); +#129424 = ORIENTED_EDGE('',*,*,#129425,.F.); +#129425 = EDGE_CURVE('',#128571,#129418,#129426,.T.); +#129426 = LINE('',#129427,#129428); +#129427 = CARTESIAN_POINT('',(6.575,4.75,-8.6)); +#129428 = VECTOR('',#129429,1.); +#129429 = DIRECTION('',(0.,-1.,0.)); +#129430 = ORIENTED_EDGE('',*,*,#128570,.T.); +#129431 = PLANE('',#129432); +#129432 = AXIS2_PLACEMENT_3D('',#129433,#129434,#129435); +#129433 = CARTESIAN_POINT('',(6.575,4.75,-8.6)); +#129434 = DIRECTION('',(0.,0.,-1.)); +#129435 = DIRECTION('',(-1.,0.,0.)); +#129436 = ADVANCED_FACE('',(#129437),#129583,.T.); +#129437 = FACE_BOUND('',#129438,.T.); +#129438 = EDGE_LOOP('',(#129439,#129447,#129448,#129449,#129457,#129465, + #129473,#129481,#129489,#129497,#129505,#129513,#129521,#129530, + #129538,#129545,#129546,#129554,#129562,#129568,#129569,#129577)); +#129439 = ORIENTED_EDGE('',*,*,#129440,.F.); +#129440 = EDGE_CURVE('',#128579,#129441,#129443,.T.); +#129441 = VERTEX_POINT('',#129442); +#129442 = CARTESIAN_POINT('',(6.575,4.45,-6.8096)); +#129443 = LINE('',#129444,#129445); +#129444 = CARTESIAN_POINT('',(6.575,4.75,-6.8096)); +#129445 = VECTOR('',#129446,1.); +#129446 = DIRECTION('',(0.,-1.,0.)); +#129447 = ORIENTED_EDGE('',*,*,#128578,.T.); +#129448 = ORIENTED_EDGE('',*,*,#129425,.T.); +#129449 = ORIENTED_EDGE('',*,*,#129450,.F.); +#129450 = EDGE_CURVE('',#129451,#129418,#129453,.T.); +#129451 = VERTEX_POINT('',#129452); +#129452 = CARTESIAN_POINT('',(6.575,-4.75,-6.8096)); +#129453 = LINE('',#129454,#129455); +#129454 = CARTESIAN_POINT('',(6.575,-4.75,-6.8096)); +#129455 = VECTOR('',#129456,1.); +#129456 = DIRECTION('',(0.,0.,-1.)); +#129457 = ORIENTED_EDGE('',*,*,#129458,.T.); +#129458 = EDGE_CURVE('',#129451,#129459,#129461,.T.); +#129459 = VERTEX_POINT('',#129460); +#129460 = CARTESIAN_POINT('',(6.575,-4.45,-6.8096)); +#129461 = LINE('',#129462,#129463); +#129462 = CARTESIAN_POINT('',(6.575,-4.75,-6.8096)); +#129463 = VECTOR('',#129464,1.); +#129464 = DIRECTION('',(0.,1.,0.)); +#129465 = ORIENTED_EDGE('',*,*,#129466,.T.); +#129466 = EDGE_CURVE('',#129459,#129467,#129469,.T.); +#129467 = VERTEX_POINT('',#129468); +#129468 = CARTESIAN_POINT('',(6.575,-4.45,-6.5096)); +#129469 = LINE('',#129470,#129471); +#129470 = CARTESIAN_POINT('',(6.575,-4.45,-6.8096)); +#129471 = VECTOR('',#129472,1.); +#129472 = DIRECTION('',(0.,0.,1.)); +#129473 = ORIENTED_EDGE('',*,*,#129474,.F.); +#129474 = EDGE_CURVE('',#129475,#129467,#129477,.T.); +#129475 = VERTEX_POINT('',#129476); +#129476 = CARTESIAN_POINT('',(6.575,-4.75,-6.5096)); +#129477 = LINE('',#129478,#129479); +#129478 = CARTESIAN_POINT('',(6.575,-4.75,-6.5096)); +#129479 = VECTOR('',#129480,1.); +#129480 = DIRECTION('',(0.,1.,0.)); +#129481 = ORIENTED_EDGE('',*,*,#129482,.F.); +#129482 = EDGE_CURVE('',#129483,#129475,#129485,.T.); +#129483 = VERTEX_POINT('',#129484); +#129484 = CARTESIAN_POINT('',(6.575,-4.75,-2.9904)); +#129485 = LINE('',#129486,#129487); +#129486 = CARTESIAN_POINT('',(6.575,-4.75,-2.9904)); +#129487 = VECTOR('',#129488,1.); +#129488 = DIRECTION('',(0.,0.,-1.)); +#129489 = ORIENTED_EDGE('',*,*,#129490,.T.); +#129490 = EDGE_CURVE('',#129483,#129491,#129493,.T.); +#129491 = VERTEX_POINT('',#129492); +#129492 = CARTESIAN_POINT('',(6.575,-4.45,-2.9904)); +#129493 = LINE('',#129494,#129495); +#129494 = CARTESIAN_POINT('',(6.575,-4.75,-2.9904)); +#129495 = VECTOR('',#129496,1.); +#129496 = DIRECTION('',(0.,1.,0.)); +#129497 = ORIENTED_EDGE('',*,*,#129498,.T.); +#129498 = EDGE_CURVE('',#129491,#129499,#129501,.T.); +#129499 = VERTEX_POINT('',#129500); +#129500 = CARTESIAN_POINT('',(6.575,-4.45,-2.6904)); +#129501 = LINE('',#129502,#129503); +#129502 = CARTESIAN_POINT('',(6.575,-4.45,-2.9904)); +#129503 = VECTOR('',#129504,1.); +#129504 = DIRECTION('',(0.,0.,1.)); +#129505 = ORIENTED_EDGE('',*,*,#129506,.F.); +#129506 = EDGE_CURVE('',#129507,#129499,#129509,.T.); +#129507 = VERTEX_POINT('',#129508); +#129508 = CARTESIAN_POINT('',(6.575,-4.75,-2.6904)); +#129509 = LINE('',#129510,#129511); +#129510 = CARTESIAN_POINT('',(6.575,-4.75,-2.6904)); +#129511 = VECTOR('',#129512,1.); +#129512 = DIRECTION('',(0.,1.,0.)); +#129513 = ORIENTED_EDGE('',*,*,#129514,.F.); +#129514 = EDGE_CURVE('',#129515,#129507,#129517,.T.); +#129515 = VERTEX_POINT('',#129516); +#129516 = CARTESIAN_POINT('',(6.575,-4.75,-2.5)); +#129517 = LINE('',#129518,#129519); +#129518 = CARTESIAN_POINT('',(6.575,-4.75,-2.5)); +#129519 = VECTOR('',#129520,1.); +#129520 = DIRECTION('',(0.,0.,-1.)); +#129521 = ORIENTED_EDGE('',*,*,#129522,.T.); +#129522 = EDGE_CURVE('',#129515,#129523,#129525,.T.); +#129523 = VERTEX_POINT('',#129524); +#129524 = CARTESIAN_POINT('',(6.575,-2.15,0.1)); +#129525 = CIRCLE('',#129526,2.6); +#129526 = AXIS2_PLACEMENT_3D('',#129527,#129528,#129529); +#129527 = CARTESIAN_POINT('',(6.575,-2.15,-2.5)); +#129528 = DIRECTION('',(-1.,0.,0.)); +#129529 = DIRECTION('',(0.,-1.,0.)); +#129530 = ORIENTED_EDGE('',*,*,#129531,.F.); +#129531 = EDGE_CURVE('',#129532,#129523,#129534,.T.); +#129532 = VERTEX_POINT('',#129533); +#129533 = CARTESIAN_POINT('',(6.575,2.15,0.1)); +#129534 = LINE('',#129535,#129536); +#129535 = CARTESIAN_POINT('',(6.575,2.15,0.1)); +#129536 = VECTOR('',#129537,1.); +#129537 = DIRECTION('',(0.,-1.,0.)); +#129538 = ORIENTED_EDGE('',*,*,#129539,.T.); +#129539 = EDGE_CURVE('',#129532,#128643,#129540,.T.); +#129540 = CIRCLE('',#129541,2.6); +#129541 = AXIS2_PLACEMENT_3D('',#129542,#129543,#129544); +#129542 = CARTESIAN_POINT('',(6.575,2.15,-2.5)); +#129543 = DIRECTION('',(-1.,0.,0.)); +#129544 = DIRECTION('',(0.,0.,1.)); +#129545 = ORIENTED_EDGE('',*,*,#128642,.T.); +#129546 = ORIENTED_EDGE('',*,*,#129547,.T.); +#129547 = EDGE_CURVE('',#128635,#129548,#129550,.T.); +#129548 = VERTEX_POINT('',#129549); +#129549 = CARTESIAN_POINT('',(6.575,4.45,-2.6904)); +#129550 = LINE('',#129551,#129552); +#129551 = CARTESIAN_POINT('',(6.575,4.75,-2.6904)); +#129552 = VECTOR('',#129553,1.); +#129553 = DIRECTION('',(0.,-1.,0.)); +#129554 = ORIENTED_EDGE('',*,*,#129555,.F.); +#129555 = EDGE_CURVE('',#129556,#129548,#129558,.T.); +#129556 = VERTEX_POINT('',#129557); +#129557 = CARTESIAN_POINT('',(6.575,4.45,-2.9904)); +#129558 = LINE('',#129559,#129560); +#129559 = CARTESIAN_POINT('',(6.575,4.45,-2.9904)); +#129560 = VECTOR('',#129561,1.); +#129561 = DIRECTION('',(0.,0.,1.)); +#129562 = ORIENTED_EDGE('',*,*,#129563,.F.); +#129563 = EDGE_CURVE('',#128611,#129556,#129564,.T.); +#129564 = LINE('',#129565,#129566); +#129565 = CARTESIAN_POINT('',(6.575,4.75,-2.9904)); +#129566 = VECTOR('',#129567,1.); +#129567 = DIRECTION('',(0.,-1.,0.)); +#129568 = ORIENTED_EDGE('',*,*,#128610,.T.); +#129569 = ORIENTED_EDGE('',*,*,#129570,.T.); +#129570 = EDGE_CURVE('',#128603,#129571,#129573,.T.); +#129571 = VERTEX_POINT('',#129572); +#129572 = CARTESIAN_POINT('',(6.575,4.45,-6.5096)); +#129573 = LINE('',#129574,#129575); +#129574 = CARTESIAN_POINT('',(6.575,4.75,-6.5096)); +#129575 = VECTOR('',#129576,1.); +#129576 = DIRECTION('',(0.,-1.,0.)); +#129577 = ORIENTED_EDGE('',*,*,#129578,.F.); +#129578 = EDGE_CURVE('',#129441,#129571,#129579,.T.); +#129579 = LINE('',#129580,#129581); +#129580 = CARTESIAN_POINT('',(6.575,4.45,-6.8096)); +#129581 = VECTOR('',#129582,1.); +#129582 = DIRECTION('',(0.,0.,1.)); +#129583 = PLANE('',#129584); +#129584 = AXIS2_PLACEMENT_3D('',#129585,#129586,#129587); +#129585 = CARTESIAN_POINT('',(6.575,4.75,0.1)); +#129586 = DIRECTION('',(-1.,0.,0.)); +#129587 = DIRECTION('',(0.,0.,-1.)); +#129588 = ADVANCED_FACE('',(#129589),#129614,.F.); +#129589 = FACE_BOUND('',#129590,.T.); +#129590 = EDGE_LOOP('',(#129591,#129592,#129600,#129608)); +#129591 = ORIENTED_EDGE('',*,*,#129555,.T.); +#129592 = ORIENTED_EDGE('',*,*,#129593,.F.); +#129593 = EDGE_CURVE('',#129594,#129548,#129596,.T.); +#129594 = VERTEX_POINT('',#129595); +#129595 = CARTESIAN_POINT('',(7.875,4.45,-2.6904)); +#129596 = LINE('',#129597,#129598); +#129597 = CARTESIAN_POINT('',(7.875,4.45,-2.6904)); +#129598 = VECTOR('',#129599,1.); +#129599 = DIRECTION('',(-1.,0.,0.)); +#129600 = ORIENTED_EDGE('',*,*,#129601,.F.); +#129601 = EDGE_CURVE('',#129602,#129594,#129604,.T.); +#129602 = VERTEX_POINT('',#129603); +#129603 = CARTESIAN_POINT('',(7.875,4.45,-2.9904)); +#129604 = LINE('',#129605,#129606); +#129605 = CARTESIAN_POINT('',(7.875,4.45,-2.9904)); +#129606 = VECTOR('',#129607,1.); +#129607 = DIRECTION('',(0.,0.,1.)); +#129608 = ORIENTED_EDGE('',*,*,#129609,.F.); +#129609 = EDGE_CURVE('',#129556,#129602,#129610,.T.); +#129610 = LINE('',#129611,#129612); +#129611 = CARTESIAN_POINT('',(6.575,4.45,-2.9904)); +#129612 = VECTOR('',#129613,1.); +#129613 = DIRECTION('',(1.,0.,0.)); +#129614 = PLANE('',#129615); +#129615 = AXIS2_PLACEMENT_3D('',#129616,#129617,#129618); +#129616 = CARTESIAN_POINT('',(0.,4.45,0.)); +#129617 = DIRECTION('',(0.,-1.,0.)); +#129618 = DIRECTION('',(1.,0.,0.)); +#129619 = ADVANCED_FACE('',(#129620),#129645,.F.); +#129620 = FACE_BOUND('',#129621,.T.); +#129621 = EDGE_LOOP('',(#129622,#129623,#129631,#129639)); +#129622 = ORIENTED_EDGE('',*,*,#129578,.T.); +#129623 = ORIENTED_EDGE('',*,*,#129624,.F.); +#129624 = EDGE_CURVE('',#129625,#129571,#129627,.T.); +#129625 = VERTEX_POINT('',#129626); +#129626 = CARTESIAN_POINT('',(7.875,4.45,-6.5096)); +#129627 = LINE('',#129628,#129629); +#129628 = CARTESIAN_POINT('',(7.875,4.45,-6.5096)); +#129629 = VECTOR('',#129630,1.); +#129630 = DIRECTION('',(-1.,0.,0.)); +#129631 = ORIENTED_EDGE('',*,*,#129632,.F.); +#129632 = EDGE_CURVE('',#129633,#129625,#129635,.T.); +#129633 = VERTEX_POINT('',#129634); +#129634 = CARTESIAN_POINT('',(7.875,4.45,-6.8096)); +#129635 = LINE('',#129636,#129637); +#129636 = CARTESIAN_POINT('',(7.875,4.45,-6.8096)); +#129637 = VECTOR('',#129638,1.); +#129638 = DIRECTION('',(0.,0.,1.)); +#129639 = ORIENTED_EDGE('',*,*,#129640,.F.); +#129640 = EDGE_CURVE('',#129441,#129633,#129641,.T.); +#129641 = LINE('',#129642,#129643); +#129642 = CARTESIAN_POINT('',(6.575,4.45,-6.8096)); +#129643 = VECTOR('',#129644,1.); +#129644 = DIRECTION('',(1.,0.,0.)); +#129645 = PLANE('',#129646); +#129646 = AXIS2_PLACEMENT_3D('',#129647,#129648,#129649); +#129647 = CARTESIAN_POINT('',(0.,4.45,0.)); +#129648 = DIRECTION('',(0.,-1.,0.)); +#129649 = DIRECTION('',(1.,0.,0.)); +#129650 = ADVANCED_FACE('',(#129651),#129662,.T.); +#129651 = FACE_BOUND('',#129652,.T.); +#129652 = EDGE_LOOP('',(#129653,#129659,#129660,#129661)); +#129653 = ORIENTED_EDGE('',*,*,#129654,.F.); +#129654 = EDGE_CURVE('',#128619,#129602,#129655,.T.); +#129655 = LINE('',#129656,#129657); +#129656 = CARTESIAN_POINT('',(7.875,4.75,-2.9904)); +#129657 = VECTOR('',#129658,1.); +#129658 = DIRECTION('',(0.,-1.,0.)); +#129659 = ORIENTED_EDGE('',*,*,#128618,.F.); +#129660 = ORIENTED_EDGE('',*,*,#129563,.T.); +#129661 = ORIENTED_EDGE('',*,*,#129609,.T.); +#129662 = PLANE('',#129663); +#129663 = AXIS2_PLACEMENT_3D('',#129664,#129665,#129666); +#129664 = CARTESIAN_POINT('',(6.575,4.75,-2.9904)); +#129665 = DIRECTION('',(0.,0.,1.)); +#129666 = DIRECTION('',(0.,-1.,0.)); +#129667 = ADVANCED_FACE('',(#129668),#129679,.T.); +#129668 = FACE_BOUND('',#129669,.T.); +#129669 = EDGE_LOOP('',(#129670,#129671,#129677,#129678)); +#129670 = ORIENTED_EDGE('',*,*,#129601,.T.); +#129671 = ORIENTED_EDGE('',*,*,#129672,.F.); +#129672 = EDGE_CURVE('',#128627,#129594,#129673,.T.); +#129673 = LINE('',#129674,#129675); +#129674 = CARTESIAN_POINT('',(7.875,4.75,-2.6904)); +#129675 = VECTOR('',#129676,1.); +#129676 = DIRECTION('',(0.,-1.,0.)); +#129677 = ORIENTED_EDGE('',*,*,#128626,.F.); +#129678 = ORIENTED_EDGE('',*,*,#129654,.T.); +#129679 = PLANE('',#129680); +#129680 = AXIS2_PLACEMENT_3D('',#129681,#129682,#129683); +#129681 = CARTESIAN_POINT('',(7.875,4.75,-2.9904)); +#129682 = DIRECTION('',(-1.,0.,0.)); +#129683 = DIRECTION('',(0.,0.,-1.)); +#129684 = ADVANCED_FACE('',(#129685),#129691,.T.); +#129685 = FACE_BOUND('',#129686,.T.); +#129686 = EDGE_LOOP('',(#129687,#129688,#129689,#129690)); +#129687 = ORIENTED_EDGE('',*,*,#129547,.F.); +#129688 = ORIENTED_EDGE('',*,*,#128634,.T.); +#129689 = ORIENTED_EDGE('',*,*,#129672,.T.); +#129690 = ORIENTED_EDGE('',*,*,#129593,.T.); +#129691 = PLANE('',#129692); +#129692 = AXIS2_PLACEMENT_3D('',#129693,#129694,#129695); +#129693 = CARTESIAN_POINT('',(7.875,4.75,-2.6904)); +#129694 = DIRECTION('',(0.,0.,-1.)); +#129695 = DIRECTION('',(-1.,0.,0.)); +#129696 = ADVANCED_FACE('',(#129697),#129708,.T.); +#129697 = FACE_BOUND('',#129698,.T.); +#129698 = EDGE_LOOP('',(#129699,#129705,#129706,#129707)); +#129699 = ORIENTED_EDGE('',*,*,#129700,.F.); +#129700 = EDGE_CURVE('',#128587,#129633,#129701,.T.); +#129701 = LINE('',#129702,#129703); +#129702 = CARTESIAN_POINT('',(7.875,4.75,-6.8096)); +#129703 = VECTOR('',#129704,1.); +#129704 = DIRECTION('',(0.,-1.,0.)); +#129705 = ORIENTED_EDGE('',*,*,#128586,.F.); +#129706 = ORIENTED_EDGE('',*,*,#129440,.T.); +#129707 = ORIENTED_EDGE('',*,*,#129640,.T.); +#129708 = PLANE('',#129709); +#129709 = AXIS2_PLACEMENT_3D('',#129710,#129711,#129712); +#129710 = CARTESIAN_POINT('',(6.575,4.75,-6.8096)); +#129711 = DIRECTION('',(0.,0.,1.)); +#129712 = DIRECTION('',(0.,-1.,0.)); +#129713 = ADVANCED_FACE('',(#129714),#129725,.T.); +#129714 = FACE_BOUND('',#129715,.T.); +#129715 = EDGE_LOOP('',(#129716,#129717,#129723,#129724)); +#129716 = ORIENTED_EDGE('',*,*,#129632,.T.); +#129717 = ORIENTED_EDGE('',*,*,#129718,.F.); +#129718 = EDGE_CURVE('',#128595,#129625,#129719,.T.); +#129719 = LINE('',#129720,#129721); +#129720 = CARTESIAN_POINT('',(7.875,4.75,-6.5096)); +#129721 = VECTOR('',#129722,1.); +#129722 = DIRECTION('',(0.,-1.,0.)); +#129723 = ORIENTED_EDGE('',*,*,#128594,.F.); +#129724 = ORIENTED_EDGE('',*,*,#129700,.T.); +#129725 = PLANE('',#129726); +#129726 = AXIS2_PLACEMENT_3D('',#129727,#129728,#129729); +#129727 = CARTESIAN_POINT('',(7.875,4.75,-6.8096)); +#129728 = DIRECTION('',(-1.,0.,0.)); +#129729 = DIRECTION('',(0.,0.,-1.)); +#129730 = ADVANCED_FACE('',(#129731),#129737,.T.); +#129731 = FACE_BOUND('',#129732,.T.); +#129732 = EDGE_LOOP('',(#129733,#129734,#129735,#129736)); +#129733 = ORIENTED_EDGE('',*,*,#129570,.F.); +#129734 = ORIENTED_EDGE('',*,*,#128602,.T.); +#129735 = ORIENTED_EDGE('',*,*,#129718,.T.); +#129736 = ORIENTED_EDGE('',*,*,#129624,.T.); +#129737 = PLANE('',#129738); +#129738 = AXIS2_PLACEMENT_3D('',#129739,#129740,#129741); +#129739 = CARTESIAN_POINT('',(7.875,4.75,-6.5096)); +#129740 = DIRECTION('',(0.,0.,-1.)); +#129741 = DIRECTION('',(-1.,0.,0.)); +#129742 = ADVANCED_FACE('',(#129743),#129762,.T.); +#129743 = FACE_BOUND('',#129744,.T.); +#129744 = EDGE_LOOP('',(#129745,#129746,#129747,#129755)); +#129745 = ORIENTED_EDGE('',*,*,#128650,.F.); +#129746 = ORIENTED_EDGE('',*,*,#129539,.F.); +#129747 = ORIENTED_EDGE('',*,*,#129748,.T.); +#129748 = EDGE_CURVE('',#129532,#129749,#129751,.T.); +#129749 = VERTEX_POINT('',#129750); +#129750 = CARTESIAN_POINT('',(8.9,2.15,0.1)); +#129751 = LINE('',#129752,#129753); +#129752 = CARTESIAN_POINT('',(6.575,2.15,0.1)); +#129753 = VECTOR('',#129754,1.); +#129754 = DIRECTION('',(1.,0.,0.)); +#129755 = ORIENTED_EDGE('',*,*,#129756,.F.); +#129756 = EDGE_CURVE('',#128651,#129749,#129757,.T.); +#129757 = CIRCLE('',#129758,2.6); +#129758 = AXIS2_PLACEMENT_3D('',#129759,#129760,#129761); +#129759 = CARTESIAN_POINT('',(8.9,2.15,-2.5)); +#129760 = DIRECTION('',(1.,0.,0.)); +#129761 = DIRECTION('',(-0.,1.,0.)); +#129762 = CYLINDRICAL_SURFACE('',#129763,2.6); +#129763 = AXIS2_PLACEMENT_3D('',#129764,#129765,#129766); +#129764 = CARTESIAN_POINT('',(3.21347,2.15,-2.5)); +#129765 = DIRECTION('',(1.,0.,0.)); +#129766 = DIRECTION('',(-0.,1.,0.)); +#129767 = ADVANCED_FACE('',(#129768,#129860,#129903,#129923),#129966,.T. + ); +#129768 = FACE_BOUND('',#129769,.T.); +#129769 = EDGE_LOOP('',(#129770,#129771,#129779,#129788,#129794,#129795, + #129803,#129811,#129820,#129826,#129827,#129835,#129844,#129852, + #129858,#129859)); +#129770 = ORIENTED_EDGE('',*,*,#129756,.T.); +#129771 = ORIENTED_EDGE('',*,*,#129772,.T.); +#129772 = EDGE_CURVE('',#129749,#129773,#129775,.T.); +#129773 = VERTEX_POINT('',#129774); +#129774 = CARTESIAN_POINT('',(8.9,-2.15,0.1)); +#129775 = LINE('',#129776,#129777); +#129776 = CARTESIAN_POINT('',(8.9,2.15,0.1)); +#129777 = VECTOR('',#129778,1.); +#129778 = DIRECTION('',(0.,-1.,0.)); +#129779 = ORIENTED_EDGE('',*,*,#129780,.T.); +#129780 = EDGE_CURVE('',#129773,#129781,#129783,.T.); +#129781 = VERTEX_POINT('',#129782); +#129782 = CARTESIAN_POINT('',(8.9,-4.75,-2.5)); +#129783 = CIRCLE('',#129784,2.6); +#129784 = AXIS2_PLACEMENT_3D('',#129785,#129786,#129787); +#129785 = CARTESIAN_POINT('',(8.9,-2.15,-2.5)); +#129786 = DIRECTION('',(1.,0.,-0.)); +#129787 = DIRECTION('',(0.,0.,1.)); +#129788 = ORIENTED_EDGE('',*,*,#129789,.F.); +#129789 = EDGE_CURVE('',#128785,#129781,#129790,.T.); +#129790 = LINE('',#129791,#129792); +#129791 = CARTESIAN_POINT('',(8.9,-4.75,-8.3)); +#129792 = VECTOR('',#129793,1.); +#129793 = DIRECTION('',(0.,0.,1.)); +#129794 = ORIENTED_EDGE('',*,*,#128784,.F.); +#129795 = ORIENTED_EDGE('',*,*,#129796,.T.); +#129796 = EDGE_CURVE('',#128777,#129797,#129799,.T.); +#129797 = VERTEX_POINT('',#129798); +#129798 = CARTESIAN_POINT('',(8.9,-3.55,-5.75)); +#129799 = LINE('',#129800,#129801); +#129800 = CARTESIAN_POINT('',(8.9,-3.55,-8.3)); +#129801 = VECTOR('',#129802,1.); +#129802 = DIRECTION('',(0.,0.,1.)); +#129803 = ORIENTED_EDGE('',*,*,#129804,.F.); +#129804 = EDGE_CURVE('',#129805,#129797,#129807,.T.); +#129805 = VERTEX_POINT('',#129806); +#129806 = CARTESIAN_POINT('',(8.9,-3.092329219213,-5.75)); +#129807 = LINE('',#129808,#129809); +#129808 = CARTESIAN_POINT('',(8.9,-3.092329219213,-5.75)); +#129809 = VECTOR('',#129810,1.); +#129810 = DIRECTION('',(0.,-1.,0.)); +#129811 = ORIENTED_EDGE('',*,*,#129812,.T.); +#129812 = EDGE_CURVE('',#129805,#129813,#129815,.T.); +#129813 = VERTEX_POINT('',#129814); +#129814 = CARTESIAN_POINT('',(8.9,-1.,-7.842329219213)); +#129815 = CIRCLE('',#129816,3.25); +#129816 = AXIS2_PLACEMENT_3D('',#129817,#129818,#129819); +#129817 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129818 = DIRECTION('',(1.,0.,0.)); +#129819 = DIRECTION('',(0.,-0.951485913604,-0.307692307692)); +#129820 = ORIENTED_EDGE('',*,*,#129821,.F.); +#129821 = EDGE_CURVE('',#128753,#129813,#129822,.T.); +#129822 = LINE('',#129823,#129824); +#129823 = CARTESIAN_POINT('',(8.9,-1.,-8.3)); +#129824 = VECTOR('',#129825,1.); +#129825 = DIRECTION('',(0.,0.,1.)); +#129826 = ORIENTED_EDGE('',*,*,#128752,.F.); +#129827 = ORIENTED_EDGE('',*,*,#129828,.T.); +#129828 = EDGE_CURVE('',#128745,#129829,#129831,.T.); +#129829 = VERTEX_POINT('',#129830); +#129830 = CARTESIAN_POINT('',(8.9,1.,-7.842329219213)); +#129831 = LINE('',#129832,#129833); +#129832 = CARTESIAN_POINT('',(8.9,1.,-8.3)); +#129833 = VECTOR('',#129834,1.); +#129834 = DIRECTION('',(0.,0.,1.)); +#129835 = ORIENTED_EDGE('',*,*,#129836,.T.); +#129836 = EDGE_CURVE('',#129829,#129837,#129839,.T.); +#129837 = VERTEX_POINT('',#129838); +#129838 = CARTESIAN_POINT('',(8.9,3.092329219213,-5.75)); +#129839 = CIRCLE('',#129840,3.25); +#129840 = AXIS2_PLACEMENT_3D('',#129841,#129842,#129843); +#129841 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129842 = DIRECTION('',(1.,0.,0.)); +#129843 = DIRECTION('',(0.,0.307692307692,-0.951485913604)); +#129844 = ORIENTED_EDGE('',*,*,#129845,.F.); +#129845 = EDGE_CURVE('',#129846,#129837,#129848,.T.); +#129846 = VERTEX_POINT('',#129847); +#129847 = CARTESIAN_POINT('',(8.9,3.55,-5.75)); +#129848 = LINE('',#129849,#129850); +#129849 = CARTESIAN_POINT('',(8.9,3.55,-5.75)); +#129850 = VECTOR('',#129851,1.); +#129851 = DIRECTION('',(0.,-1.,0.)); +#129852 = ORIENTED_EDGE('',*,*,#129853,.F.); +#129853 = EDGE_CURVE('',#128721,#129846,#129854,.T.); +#129854 = LINE('',#129855,#129856); +#129855 = CARTESIAN_POINT('',(8.9,3.55,-8.3)); +#129856 = VECTOR('',#129857,1.); +#129857 = DIRECTION('',(0.,0.,1.)); +#129858 = ORIENTED_EDGE('',*,*,#128720,.F.); +#129859 = ORIENTED_EDGE('',*,*,#128658,.T.); +#129860 = FACE_BOUND('',#129861,.T.); +#129861 = EDGE_LOOP('',(#129862,#129872,#129880,#129888,#129897)); +#129862 = ORIENTED_EDGE('',*,*,#129863,.F.); +#129863 = EDGE_CURVE('',#129864,#129866,#129868,.T.); +#129864 = VERTEX_POINT('',#129865); +#129865 = CARTESIAN_POINT('',(8.9,-3.55,-1.2)); +#129866 = VERTEX_POINT('',#129867); +#129867 = CARTESIAN_POINT('',(8.9,-3.55,-3.75)); +#129868 = LINE('',#129869,#129870); +#129869 = CARTESIAN_POINT('',(8.9,-3.55,-1.2)); +#129870 = VECTOR('',#129871,1.); +#129871 = DIRECTION('',(0.,0.,-1.)); +#129872 = ORIENTED_EDGE('',*,*,#129873,.F.); +#129873 = EDGE_CURVE('',#129874,#129864,#129876,.T.); +#129874 = VERTEX_POINT('',#129875); +#129875 = CARTESIAN_POINT('',(8.9,-1.,-1.2)); +#129876 = LINE('',#129877,#129878); +#129877 = CARTESIAN_POINT('',(8.9,-1.,-1.2)); +#129878 = VECTOR('',#129879,1.); +#129879 = DIRECTION('',(0.,-1.,0.)); +#129880 = ORIENTED_EDGE('',*,*,#129881,.F.); +#129881 = EDGE_CURVE('',#129882,#129874,#129884,.T.); +#129882 = VERTEX_POINT('',#129883); +#129883 = CARTESIAN_POINT('',(8.9,-1.,-1.657670780787)); +#129884 = LINE('',#129885,#129886); +#129885 = CARTESIAN_POINT('',(8.9,-1.,-1.657670780787)); +#129886 = VECTOR('',#129887,1.); +#129887 = DIRECTION('',(0.,0.,1.)); +#129888 = ORIENTED_EDGE('',*,*,#129889,.T.); +#129889 = EDGE_CURVE('',#129882,#129890,#129892,.T.); +#129890 = VERTEX_POINT('',#129891); +#129891 = CARTESIAN_POINT('',(8.9,-3.092329219213,-3.75)); +#129892 = CIRCLE('',#129893,3.25); +#129893 = AXIS2_PLACEMENT_3D('',#129894,#129895,#129896); +#129894 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129895 = DIRECTION('',(1.,0.,0.)); +#129896 = DIRECTION('',(0.,-0.307692307692,0.951485913604)); +#129897 = ORIENTED_EDGE('',*,*,#129898,.F.); +#129898 = EDGE_CURVE('',#129866,#129890,#129899,.T.); +#129899 = LINE('',#129900,#129901); +#129900 = CARTESIAN_POINT('',(8.9,-3.55,-3.75)); +#129901 = VECTOR('',#129902,1.); +#129902 = DIRECTION('',(0.,1.,0.)); +#129903 = FACE_BOUND('',#129904,.T.); +#129904 = EDGE_LOOP('',(#129905,#129916)); +#129905 = ORIENTED_EDGE('',*,*,#129906,.F.); +#129906 = EDGE_CURVE('',#129907,#129909,#129911,.T.); +#129907 = VERTEX_POINT('',#129908); +#129908 = CARTESIAN_POINT('',(8.9,0.,-2.25)); +#129909 = VERTEX_POINT('',#129910); +#129910 = CARTESIAN_POINT('',(8.9,0.,-7.25)); +#129911 = CIRCLE('',#129912,2.5); +#129912 = AXIS2_PLACEMENT_3D('',#129913,#129914,#129915); +#129913 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129914 = DIRECTION('',(1.,0.,-0.)); +#129915 = DIRECTION('',(0.,0.,1.)); +#129916 = ORIENTED_EDGE('',*,*,#129917,.F.); +#129917 = EDGE_CURVE('',#129909,#129907,#129918,.T.); +#129918 = CIRCLE('',#129919,2.5); +#129919 = AXIS2_PLACEMENT_3D('',#129920,#129921,#129922); +#129920 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129921 = DIRECTION('',(1.,0.,0.)); +#129922 = DIRECTION('',(0.,0.,-1.)); +#129923 = FACE_BOUND('',#129924,.T.); +#129924 = EDGE_LOOP('',(#129925,#129935,#129943,#129952,#129960)); +#129925 = ORIENTED_EDGE('',*,*,#129926,.F.); +#129926 = EDGE_CURVE('',#129927,#129929,#129931,.T.); +#129927 = VERTEX_POINT('',#129928); +#129928 = CARTESIAN_POINT('',(8.9,3.55,-3.75)); +#129929 = VERTEX_POINT('',#129930); +#129930 = CARTESIAN_POINT('',(8.9,3.55,-1.2)); +#129931 = LINE('',#129932,#129933); +#129932 = CARTESIAN_POINT('',(8.9,3.55,-3.75)); +#129933 = VECTOR('',#129934,1.); +#129934 = DIRECTION('',(0.,0.,1.)); +#129935 = ORIENTED_EDGE('',*,*,#129936,.F.); +#129936 = EDGE_CURVE('',#129937,#129927,#129939,.T.); +#129937 = VERTEX_POINT('',#129938); +#129938 = CARTESIAN_POINT('',(8.9,3.092329219213,-3.75)); +#129939 = LINE('',#129940,#129941); +#129940 = CARTESIAN_POINT('',(8.9,3.092329219213,-3.75)); +#129941 = VECTOR('',#129942,1.); +#129942 = DIRECTION('',(0.,1.,0.)); +#129943 = ORIENTED_EDGE('',*,*,#129944,.T.); +#129944 = EDGE_CURVE('',#129937,#129945,#129947,.T.); +#129945 = VERTEX_POINT('',#129946); +#129946 = CARTESIAN_POINT('',(8.9,1.,-1.657670780787)); +#129947 = CIRCLE('',#129948,3.25); +#129948 = AXIS2_PLACEMENT_3D('',#129949,#129950,#129951); +#129949 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#129950 = DIRECTION('',(1.,0.,0.)); +#129951 = DIRECTION('',(-0.,0.951485913604,0.307692307692)); +#129952 = ORIENTED_EDGE('',*,*,#129953,.F.); +#129953 = EDGE_CURVE('',#129954,#129945,#129956,.T.); +#129954 = VERTEX_POINT('',#129955); +#129955 = CARTESIAN_POINT('',(8.9,1.,-1.2)); +#129956 = LINE('',#129957,#129958); +#129957 = CARTESIAN_POINT('',(8.9,1.,-1.2)); +#129958 = VECTOR('',#129959,1.); +#129959 = DIRECTION('',(0.,0.,-1.)); +#129960 = ORIENTED_EDGE('',*,*,#129961,.F.); +#129961 = EDGE_CURVE('',#129929,#129954,#129962,.T.); +#129962 = LINE('',#129963,#129964); +#129963 = CARTESIAN_POINT('',(8.9,3.55,-1.2)); +#129964 = VECTOR('',#129965,1.); +#129965 = DIRECTION('',(0.,-1.,0.)); +#129966 = PLANE('',#129967); +#129967 = AXIS2_PLACEMENT_3D('',#129968,#129969,#129970); +#129968 = CARTESIAN_POINT('',(8.9,4.75,-10.5)); +#129969 = DIRECTION('',(1.,0.,0.)); +#129970 = DIRECTION('',(0.,-1.,0.)); +#129971 = ADVANCED_FACE('',(#129972),#129997,.F.); +#129972 = FACE_BOUND('',#129973,.T.); +#129973 = EDGE_LOOP('',(#129974,#129982,#129990,#129996)); +#129974 = ORIENTED_EDGE('',*,*,#129975,.T.); +#129975 = EDGE_CURVE('',#129954,#129976,#129978,.T.); +#129976 = VERTEX_POINT('',#129977); +#129977 = CARTESIAN_POINT('',(8.5,1.,-1.2)); +#129978 = LINE('',#129979,#129980); +#129979 = CARTESIAN_POINT('',(8.9,1.,-1.2)); +#129980 = VECTOR('',#129981,1.); +#129981 = DIRECTION('',(-1.,0.,0.)); +#129982 = ORIENTED_EDGE('',*,*,#129983,.F.); +#129983 = EDGE_CURVE('',#129984,#129976,#129986,.T.); +#129984 = VERTEX_POINT('',#129985); +#129985 = CARTESIAN_POINT('',(8.5,3.55,-1.2)); +#129986 = LINE('',#129987,#129988); +#129987 = CARTESIAN_POINT('',(8.5,3.55,-1.2)); +#129988 = VECTOR('',#129989,1.); +#129989 = DIRECTION('',(0.,-1.,0.)); +#129990 = ORIENTED_EDGE('',*,*,#129991,.F.); +#129991 = EDGE_CURVE('',#129929,#129984,#129992,.T.); +#129992 = LINE('',#129993,#129994); +#129993 = CARTESIAN_POINT('',(8.9,3.55,-1.2)); +#129994 = VECTOR('',#129995,1.); +#129995 = DIRECTION('',(-1.,0.,0.)); +#129996 = ORIENTED_EDGE('',*,*,#129961,.T.); +#129997 = PLANE('',#129998); +#129998 = AXIS2_PLACEMENT_3D('',#129999,#130000,#130001); +#129999 = CARTESIAN_POINT('',(8.9,3.55,-1.2)); +#130000 = DIRECTION('',(0.,0.,1.)); +#130001 = DIRECTION('',(0.,-1.,0.)); +#130002 = ADVANCED_FACE('',(#130003),#130021,.F.); +#130003 = FACE_BOUND('',#130004,.T.); +#130004 = EDGE_LOOP('',(#130005,#130006,#130014,#130020)); +#130005 = ORIENTED_EDGE('',*,*,#129991,.T.); +#130006 = ORIENTED_EDGE('',*,*,#130007,.F.); +#130007 = EDGE_CURVE('',#130008,#129984,#130010,.T.); +#130008 = VERTEX_POINT('',#130009); +#130009 = CARTESIAN_POINT('',(8.5,3.55,-3.75)); +#130010 = LINE('',#130011,#130012); +#130011 = CARTESIAN_POINT('',(8.5,3.55,-3.75)); +#130012 = VECTOR('',#130013,1.); +#130013 = DIRECTION('',(0.,0.,1.)); +#130014 = ORIENTED_EDGE('',*,*,#130015,.F.); +#130015 = EDGE_CURVE('',#129927,#130008,#130016,.T.); +#130016 = LINE('',#130017,#130018); +#130017 = CARTESIAN_POINT('',(8.9,3.55,-3.75)); +#130018 = VECTOR('',#130019,1.); +#130019 = DIRECTION('',(-1.,0.,0.)); +#130020 = ORIENTED_EDGE('',*,*,#129926,.T.); +#130021 = PLANE('',#130022); +#130022 = AXIS2_PLACEMENT_3D('',#130023,#130024,#130025); +#130023 = CARTESIAN_POINT('',(8.9,3.55,-3.75)); +#130024 = DIRECTION('',(0.,1.,0.)); +#130025 = DIRECTION('',(0.,-0.,1.)); +#130026 = ADVANCED_FACE('',(#130027),#130045,.F.); +#130027 = FACE_BOUND('',#130028,.T.); +#130028 = EDGE_LOOP('',(#130029,#130030,#130038,#130044)); +#130029 = ORIENTED_EDGE('',*,*,#130015,.T.); +#130030 = ORIENTED_EDGE('',*,*,#130031,.F.); +#130031 = EDGE_CURVE('',#130032,#130008,#130034,.T.); +#130032 = VERTEX_POINT('',#130033); +#130033 = CARTESIAN_POINT('',(8.5,3.092329219213,-3.75)); +#130034 = LINE('',#130035,#130036); +#130035 = CARTESIAN_POINT('',(8.5,3.092329219213,-3.75)); +#130036 = VECTOR('',#130037,1.); +#130037 = DIRECTION('',(0.,1.,0.)); +#130038 = ORIENTED_EDGE('',*,*,#130039,.F.); +#130039 = EDGE_CURVE('',#129937,#130032,#130040,.T.); +#130040 = LINE('',#130041,#130042); +#130041 = CARTESIAN_POINT('',(8.9,3.092329219213,-3.75)); +#130042 = VECTOR('',#130043,1.); +#130043 = DIRECTION('',(-1.,0.,0.)); +#130044 = ORIENTED_EDGE('',*,*,#129936,.T.); +#130045 = PLANE('',#130046); +#130046 = AXIS2_PLACEMENT_3D('',#130047,#130048,#130049); +#130047 = CARTESIAN_POINT('',(8.9,3.092329219213,-3.75)); +#130048 = DIRECTION('',(0.,0.,-1.)); +#130049 = DIRECTION('',(-1.,0.,0.)); +#130050 = ADVANCED_FACE('',(#130051),#130070,.T.); +#130051 = FACE_BOUND('',#130052,.T.); +#130052 = EDGE_LOOP('',(#130053,#130054,#130063,#130069)); +#130053 = ORIENTED_EDGE('',*,*,#130039,.T.); +#130054 = ORIENTED_EDGE('',*,*,#130055,.F.); +#130055 = EDGE_CURVE('',#130056,#130032,#130058,.T.); +#130056 = VERTEX_POINT('',#130057); +#130057 = CARTESIAN_POINT('',(8.5,1.,-1.657670780787)); +#130058 = CIRCLE('',#130059,3.25); +#130059 = AXIS2_PLACEMENT_3D('',#130060,#130061,#130062); +#130060 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#130061 = DIRECTION('',(-1.,0.,0.)); +#130062 = DIRECTION('',(0.,0.307692307692,0.951485913604)); +#130063 = ORIENTED_EDGE('',*,*,#130064,.F.); +#130064 = EDGE_CURVE('',#129945,#130056,#130065,.T.); +#130065 = LINE('',#130066,#130067); +#130066 = CARTESIAN_POINT('',(8.9,1.,-1.657670780787)); +#130067 = VECTOR('',#130068,1.); +#130068 = DIRECTION('',(-1.,0.,0.)); +#130069 = ORIENTED_EDGE('',*,*,#129944,.F.); +#130070 = CYLINDRICAL_SURFACE('',#130071,3.25); +#130071 = AXIS2_PLACEMENT_3D('',#130072,#130073,#130074); +#130072 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#130073 = DIRECTION('',(1.,0.,0.)); +#130074 = DIRECTION('',(0.,0.,-1.)); +#130075 = ADVANCED_FACE('',(#130076),#130087,.F.); +#130076 = FACE_BOUND('',#130077,.T.); +#130077 = EDGE_LOOP('',(#130078,#130079,#130085,#130086)); +#130078 = ORIENTED_EDGE('',*,*,#130064,.T.); +#130079 = ORIENTED_EDGE('',*,*,#130080,.F.); +#130080 = EDGE_CURVE('',#129976,#130056,#130081,.T.); +#130081 = LINE('',#130082,#130083); +#130082 = CARTESIAN_POINT('',(8.5,1.,-1.2)); +#130083 = VECTOR('',#130084,1.); +#130084 = DIRECTION('',(0.,0.,-1.)); +#130085 = ORIENTED_EDGE('',*,*,#129975,.F.); +#130086 = ORIENTED_EDGE('',*,*,#129953,.T.); +#130087 = PLANE('',#130088); +#130088 = AXIS2_PLACEMENT_3D('',#130089,#130090,#130091); +#130089 = CARTESIAN_POINT('',(8.9,1.,-1.2)); +#130090 = DIRECTION('',(0.,-1.,0.)); +#130091 = DIRECTION('',(1.,0.,0.)); +#130092 = ADVANCED_FACE('',(#130093,#130100),#130254,.T.); +#130093 = FACE_BOUND('',#130094,.T.); +#130094 = EDGE_LOOP('',(#130095,#130096,#130097,#130098,#130099)); +#130095 = ORIENTED_EDGE('',*,*,#130080,.T.); +#130096 = ORIENTED_EDGE('',*,*,#130055,.T.); +#130097 = ORIENTED_EDGE('',*,*,#130031,.T.); +#130098 = ORIENTED_EDGE('',*,*,#130007,.T.); +#130099 = ORIENTED_EDGE('',*,*,#129983,.T.); +#130100 = FACE_BOUND('',#130101,.T.); +#130101 = EDGE_LOOP('',(#130102,#130112,#130120,#130128,#130136,#130144, + #130152,#130160,#130168,#130176,#130184,#130192,#130200,#130208, + #130216,#130224,#130232,#130240,#130248)); +#130102 = ORIENTED_EDGE('',*,*,#130103,.F.); +#130103 = EDGE_CURVE('',#130104,#130106,#130108,.T.); +#130104 = VERTEX_POINT('',#130105); +#130105 = CARTESIAN_POINT('',(8.5,2.7948,-1.711482977962)); +#130106 = VERTEX_POINT('',#130107); +#130107 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.698717022038)); +#130108 = LINE('',#130109,#130110); +#130109 = CARTESIAN_POINT('',(8.5,2.7948,-1.711482977962)); +#130110 = VECTOR('',#130111,1.); +#130111 = DIRECTION('',(0.,-0.890605374698,0.454776941543)); +#130112 = ORIENTED_EDGE('',*,*,#130113,.F.); +#130113 = EDGE_CURVE('',#130114,#130104,#130116,.T.); +#130114 = VERTEX_POINT('',#130115); +#130115 = CARTESIAN_POINT('',(8.5,2.8323,-1.762546801662)); +#130116 = LINE('',#130117,#130118); +#130117 = CARTESIAN_POINT('',(8.5,2.8323,-1.762546801662)); +#130118 = VECTOR('',#130119,1.); +#130119 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#130120 = ORIENTED_EDGE('',*,*,#130121,.F.); +#130121 = EDGE_CURVE('',#130122,#130114,#130124,.T.); +#130122 = VERTEX_POINT('',#130123); +#130123 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.800844687319)); +#130124 = LINE('',#130125,#130126); +#130125 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.800844687319)); +#130126 = VECTOR('',#130127,1.); +#130127 = DIRECTION('',(0.,-0.310279666627,0.950645322125)); +#130128 = ORIENTED_EDGE('',*,*,#130129,.F.); +#130129 = EDGE_CURVE('',#130130,#130122,#130132,.T.); +#130130 = VERTEX_POINT('',#130131); +#130131 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.864674466944)); +#130132 = LINE('',#130133,#130134); +#130133 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.864674466944)); +#130134 = VECTOR('',#130135,1.); +#130135 = DIRECTION('',(0.,0.,1.)); +#130136 = ORIENTED_EDGE('',*,*,#130137,.F.); +#130137 = EDGE_CURVE('',#130138,#130130,#130140,.T.); +#130138 = VERTEX_POINT('',#130139); +#130139 = CARTESIAN_POINT('',(8.5,2.8323,-1.902972343659)); +#130140 = LINE('',#130141,#130142); +#130141 = CARTESIAN_POINT('',(8.5,2.8323,-1.902972343659)); +#130142 = VECTOR('',#130143,1.); +#130143 = DIRECTION('',(0.,0.310279732089,0.950645300759)); +#130144 = ORIENTED_EDGE('',*,*,#130145,.F.); +#130145 = EDGE_CURVE('',#130146,#130138,#130148,.T.); +#130146 = VERTEX_POINT('',#130147); +#130147 = CARTESIAN_POINT('',(8.5,2.7948,-1.95403617183)); +#130148 = LINE('',#130149,#130150); +#130149 = CARTESIAN_POINT('',(8.5,2.7948,-1.95403617183)); +#130150 = VECTOR('',#130151,1.); +#130151 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#130152 = ORIENTED_EDGE('',*,*,#130153,.F.); +#130153 = EDGE_CURVE('',#130154,#130146,#130156,.T.); +#130154 = VERTEX_POINT('',#130155); +#130155 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.992334042957)); +#130156 = LINE('',#130157,#130158); +#130157 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.992334042957)); +#130158 = VECTOR('',#130159,1.); +#130159 = DIRECTION('',(0.,0.793878085311,0.608076957024)); +#130160 = ORIENTED_EDGE('',*,*,#130161,.F.); +#130161 = EDGE_CURVE('',#130162,#130154,#130164,.T.); +#130162 = VERTEX_POINT('',#130163); +#130163 = CARTESIAN_POINT('',(8.5,2.6823,-2.0051)); +#130164 = LINE('',#130165,#130166); +#130165 = CARTESIAN_POINT('',(8.5,2.6823,-2.0051)); +#130166 = VECTOR('',#130167,1.); +#130167 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#130168 = ORIENTED_EDGE('',*,*,#130169,.F.); +#130169 = EDGE_CURVE('',#130170,#130162,#130172,.T.); +#130170 = VERTEX_POINT('',#130171); +#130171 = CARTESIAN_POINT('',(8.5,2.3823,-2.0051)); +#130172 = LINE('',#130173,#130174); +#130173 = CARTESIAN_POINT('',(8.5,2.3823,-2.0051)); +#130174 = VECTOR('',#130175,1.); +#130175 = DIRECTION('',(0.,1.,0.)); +#130176 = ORIENTED_EDGE('',*,*,#130177,.F.); +#130177 = EDGE_CURVE('',#130178,#130170,#130180,.T.); +#130178 = VERTEX_POINT('',#130179); +#130179 = CARTESIAN_POINT('',(8.5,2.3823,-1.4051)); +#130180 = LINE('',#130181,#130182); +#130181 = CARTESIAN_POINT('',(8.5,2.3823,-1.4051)); +#130182 = VECTOR('',#130183,1.); +#130183 = DIRECTION('',(0.,0.,-1.)); +#130184 = ORIENTED_EDGE('',*,*,#130185,.F.); +#130185 = EDGE_CURVE('',#130186,#130178,#130188,.T.); +#130186 = VERTEX_POINT('',#130187); +#130187 = CARTESIAN_POINT('',(8.5,2.6823,-1.4051)); +#130188 = LINE('',#130189,#130190); +#130189 = CARTESIAN_POINT('',(8.5,2.6823,-1.4051)); +#130190 = VECTOR('',#130191,1.); +#130191 = DIRECTION('',(0.,-1.,0.)); +#130192 = ORIENTED_EDGE('',*,*,#130193,.F.); +#130193 = EDGE_CURVE('',#130194,#130186,#130196,.T.); +#130194 = VERTEX_POINT('',#130195); +#130195 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.417865955925)); +#130196 = LINE('',#130197,#130198); +#130197 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.417865955925)); +#130198 = VECTOR('',#130199,1.); +#130199 = DIRECTION('',(0.,-0.979770716763,0.200123318418)); +#130200 = ORIENTED_EDGE('',*,*,#130201,.F.); +#130201 = EDGE_CURVE('',#130202,#130194,#130204,.T.); +#130202 = VERTEX_POINT('',#130203); +#130203 = CARTESIAN_POINT('',(8.5,2.7948,-1.4561638237)); +#130204 = LINE('',#130205,#130206); +#130205 = CARTESIAN_POINT('',(8.5,2.7948,-1.4561638237)); +#130206 = VECTOR('',#130207,1.); +#130207 = DIRECTION('',(0.,-0.793878111009,0.608076923474)); +#130208 = ORIENTED_EDGE('',*,*,#130209,.F.); +#130209 = EDGE_CURVE('',#130210,#130202,#130212,.T.); +#130210 = VERTEX_POINT('',#130211); +#130211 = CARTESIAN_POINT('',(8.5,2.8323,-1.5072276474)); +#130212 = LINE('',#130213,#130214); +#130213 = CARTESIAN_POINT('',(8.5,2.8323,-1.5072276474)); +#130214 = VECTOR('',#130215,1.); +#130215 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#130216 = ORIENTED_EDGE('',*,*,#130217,.F.); +#130217 = EDGE_CURVE('',#130218,#130210,#130220,.T.); +#130218 = VERTEX_POINT('',#130219); +#130219 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.545525515175)); +#130220 = LINE('',#130221,#130222); +#130221 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.545525515175)); +#130222 = VECTOR('',#130223,1.); +#130223 = DIRECTION('',(0.,-0.310279797551,0.950645279393)); +#130224 = ORIENTED_EDGE('',*,*,#130225,.F.); +#130225 = EDGE_CURVE('',#130226,#130218,#130228,.T.); +#130226 = VERTEX_POINT('',#130227); +#130227 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.596589374638)); +#130228 = LINE('',#130229,#130230); +#130229 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.596589374638)); +#130230 = VECTOR('',#130231,1.); +#130231 = DIRECTION('',(0.,0.,1.)); +#130232 = ORIENTED_EDGE('',*,*,#130233,.F.); +#130233 = EDGE_CURVE('',#130234,#130226,#130236,.T.); +#130234 = VERTEX_POINT('',#130235); +#130235 = CARTESIAN_POINT('',(8.5,2.8323,-1.634887242413)); +#130236 = LINE('',#130237,#130238); +#130237 = CARTESIAN_POINT('',(8.5,2.8323,-1.634887242413)); +#130238 = VECTOR('',#130239,1.); +#130239 = DIRECTION('',(0.,0.310279797551,0.950645279393)); +#130240 = ORIENTED_EDGE('',*,*,#130241,.F.); +#130241 = EDGE_CURVE('',#130242,#130234,#130244,.T.); +#130242 = VERTEX_POINT('',#130243); +#130243 = CARTESIAN_POINT('',(8.5,2.7948,-1.685951066113)); +#130244 = LINE('',#130245,#130246); +#130245 = CARTESIAN_POINT('',(8.5,2.7948,-1.685951066113)); +#130246 = VECTOR('',#130247,1.); +#130247 = DIRECTION('',(0.,0.59190954875,0.806004395831)); +#130248 = ORIENTED_EDGE('',*,*,#130249,.F.); +#130249 = EDGE_CURVE('',#130106,#130242,#130250,.T.); +#130250 = LINE('',#130251,#130252); +#130251 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.698717022038)); +#130252 = VECTOR('',#130253,1.); +#130253 = DIRECTION('',(0.,0.890605374698,0.454776941543)); +#130254 = PLANE('',#130255); +#130255 = AXIS2_PLACEMENT_3D('',#130256,#130257,#130258); +#130256 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#130257 = DIRECTION('',(1.,0.,0.)); +#130258 = DIRECTION('',(0.,-1.,0.)); +#130259 = ADVANCED_FACE('',(#130260),#130294,.T.); +#130260 = FACE_BOUND('',#130261,.T.); +#130261 = EDGE_LOOP('',(#130262,#130273,#130279,#130280,#130288)); +#130262 = ORIENTED_EDGE('',*,*,#130263,.T.); +#130263 = EDGE_CURVE('',#130264,#130266,#130268,.T.); +#130264 = VERTEX_POINT('',#130265); +#130265 = CARTESIAN_POINT('',(8.5,3.092329219213,-5.75)); +#130266 = VERTEX_POINT('',#130267); +#130267 = CARTESIAN_POINT('',(8.5,1.,-7.842329219213)); +#130268 = CIRCLE('',#130269,3.25); +#130269 = AXIS2_PLACEMENT_3D('',#130270,#130271,#130272); +#130270 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#130271 = DIRECTION('',(-1.,0.,0.)); +#130272 = DIRECTION('',(0.,0.951485913604,-0.307692307692)); +#130273 = ORIENTED_EDGE('',*,*,#130274,.T.); +#130274 = EDGE_CURVE('',#130266,#128737,#130275,.T.); +#130275 = LINE('',#130276,#130277); +#130276 = CARTESIAN_POINT('',(8.5,1.,-7.842329219213)); +#130277 = VECTOR('',#130278,1.); +#130278 = DIRECTION('',(0.,0.,-1.)); +#130279 = ORIENTED_EDGE('',*,*,#128736,.T.); +#130280 = ORIENTED_EDGE('',*,*,#130281,.T.); +#130281 = EDGE_CURVE('',#128729,#130282,#130284,.T.); +#130282 = VERTEX_POINT('',#130283); +#130283 = CARTESIAN_POINT('',(8.5,3.55,-5.75)); +#130284 = LINE('',#130285,#130286); +#130285 = CARTESIAN_POINT('',(8.5,3.55,-8.3)); +#130286 = VECTOR('',#130287,1.); +#130287 = DIRECTION('',(0.,0.,1.)); +#130288 = ORIENTED_EDGE('',*,*,#130289,.T.); +#130289 = EDGE_CURVE('',#130282,#130264,#130290,.T.); +#130290 = LINE('',#130291,#130292); +#130291 = CARTESIAN_POINT('',(8.5,3.55,-5.75)); +#130292 = VECTOR('',#130293,1.); +#130293 = DIRECTION('',(0.,-1.,0.)); +#130294 = PLANE('',#130295); +#130295 = AXIS2_PLACEMENT_3D('',#130296,#130297,#130298); +#130296 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#130297 = DIRECTION('',(1.,0.,0.)); +#130298 = DIRECTION('',(0.,-1.,0.)); +#130299 = ADVANCED_FACE('',(#130300),#130334,.T.); +#130300 = FACE_BOUND('',#130301,.T.); +#130301 = EDGE_LOOP('',(#130302,#130313,#130321,#130327,#130328)); +#130302 = ORIENTED_EDGE('',*,*,#130303,.T.); +#130303 = EDGE_CURVE('',#130304,#130306,#130308,.T.); +#130304 = VERTEX_POINT('',#130305); +#130305 = CARTESIAN_POINT('',(8.5,-1.,-7.842329219213)); +#130306 = VERTEX_POINT('',#130307); +#130307 = CARTESIAN_POINT('',(8.5,-3.092329219213,-5.75)); +#130308 = CIRCLE('',#130309,3.25); +#130309 = AXIS2_PLACEMENT_3D('',#130310,#130311,#130312); +#130310 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#130311 = DIRECTION('',(-1.,0.,0.)); +#130312 = DIRECTION('',(-0.,-0.307692307692,-0.951485913604)); +#130313 = ORIENTED_EDGE('',*,*,#130314,.T.); +#130314 = EDGE_CURVE('',#130306,#130315,#130317,.T.); +#130315 = VERTEX_POINT('',#130316); +#130316 = CARTESIAN_POINT('',(8.5,-3.55,-5.75)); +#130317 = LINE('',#130318,#130319); +#130318 = CARTESIAN_POINT('',(8.5,-3.092329219213,-5.75)); +#130319 = VECTOR('',#130320,1.); +#130320 = DIRECTION('',(0.,-1.,0.)); +#130321 = ORIENTED_EDGE('',*,*,#130322,.T.); +#130322 = EDGE_CURVE('',#130315,#128769,#130323,.T.); +#130323 = LINE('',#130324,#130325); +#130324 = CARTESIAN_POINT('',(8.5,-3.55,-5.75)); +#130325 = VECTOR('',#130326,1.); +#130326 = DIRECTION('',(0.,0.,-1.)); +#130327 = ORIENTED_EDGE('',*,*,#128768,.T.); +#130328 = ORIENTED_EDGE('',*,*,#130329,.T.); +#130329 = EDGE_CURVE('',#128761,#130304,#130330,.T.); +#130330 = LINE('',#130331,#130332); +#130331 = CARTESIAN_POINT('',(8.5,-1.,-8.3)); +#130332 = VECTOR('',#130333,1.); +#130333 = DIRECTION('',(0.,0.,1.)); +#130334 = PLANE('',#130335); +#130335 = AXIS2_PLACEMENT_3D('',#130336,#130337,#130338); +#130336 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#130337 = DIRECTION('',(1.,0.,0.)); +#130338 = DIRECTION('',(0.,-1.,0.)); +#130339 = ADVANCED_FACE('',(#130340,#130383,#130705),#130915,.T.); +#130340 = FACE_BOUND('',#130341,.T.); +#130341 = EDGE_LOOP('',(#130342,#130353,#130361,#130369,#130377)); +#130342 = ORIENTED_EDGE('',*,*,#130343,.T.); +#130343 = EDGE_CURVE('',#130344,#130346,#130348,.T.); +#130344 = VERTEX_POINT('',#130345); +#130345 = CARTESIAN_POINT('',(8.5,-3.092329219213,-3.75)); +#130346 = VERTEX_POINT('',#130347); +#130347 = CARTESIAN_POINT('',(8.5,-1.,-1.657670780787)); +#130348 = CIRCLE('',#130349,3.25); +#130349 = AXIS2_PLACEMENT_3D('',#130350,#130351,#130352); +#130350 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#130351 = DIRECTION('',(-1.,0.,0.)); +#130352 = DIRECTION('',(0.,-0.951485913604,0.307692307692)); +#130353 = ORIENTED_EDGE('',*,*,#130354,.T.); +#130354 = EDGE_CURVE('',#130346,#130355,#130357,.T.); +#130355 = VERTEX_POINT('',#130356); +#130356 = CARTESIAN_POINT('',(8.5,-1.,-1.2)); +#130357 = LINE('',#130358,#130359); +#130358 = CARTESIAN_POINT('',(8.5,-1.,-1.657670780787)); +#130359 = VECTOR('',#130360,1.); +#130360 = DIRECTION('',(0.,0.,1.)); +#130361 = ORIENTED_EDGE('',*,*,#130362,.T.); +#130362 = EDGE_CURVE('',#130355,#130363,#130365,.T.); +#130363 = VERTEX_POINT('',#130364); +#130364 = CARTESIAN_POINT('',(8.5,-3.55,-1.2)); +#130365 = LINE('',#130366,#130367); +#130366 = CARTESIAN_POINT('',(8.5,-1.,-1.2)); +#130367 = VECTOR('',#130368,1.); +#130368 = DIRECTION('',(0.,-1.,0.)); +#130369 = ORIENTED_EDGE('',*,*,#130370,.T.); +#130370 = EDGE_CURVE('',#130363,#130371,#130373,.T.); +#130371 = VERTEX_POINT('',#130372); +#130372 = CARTESIAN_POINT('',(8.5,-3.55,-3.75)); +#130373 = LINE('',#130374,#130375); +#130374 = CARTESIAN_POINT('',(8.5,-3.55,-1.2)); +#130375 = VECTOR('',#130376,1.); +#130376 = DIRECTION('',(0.,0.,-1.)); +#130377 = ORIENTED_EDGE('',*,*,#130378,.T.); +#130378 = EDGE_CURVE('',#130371,#130344,#130379,.T.); +#130379 = LINE('',#130380,#130381); +#130380 = CARTESIAN_POINT('',(8.5,-3.55,-3.75)); +#130381 = VECTOR('',#130382,1.); +#130382 = DIRECTION('',(0.,1.,0.)); +#130383 = FACE_BOUND('',#130384,.T.); +#130384 = EDGE_LOOP('',(#130385,#130395,#130403,#130411,#130419,#130427, + #130435,#130443,#130451,#130459,#130467,#130475,#130483,#130491, + #130499,#130507,#130515,#130523,#130531,#130539,#130547,#130555, + #130563,#130571,#130579,#130587,#130595,#130603,#130611,#130619, + #130627,#130635,#130643,#130651,#130659,#130667,#130675,#130683, + #130691,#130699)); +#130385 = ORIENTED_EDGE('',*,*,#130386,.F.); +#130386 = EDGE_CURVE('',#130387,#130389,#130391,.T.); +#130387 = VERTEX_POINT('',#130388); +#130388 = CARTESIAN_POINT('',(8.5,-2.7319,-1.812334033346)); +#130389 = VERTEX_POINT('',#130390); +#130390 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.742121275759)); +#130391 = LINE('',#130392,#130393); +#130392 = CARTESIAN_POINT('',(8.5,-2.7319,-1.812334033346)); +#130393 = VECTOR('',#130394,1.); +#130394 = DIRECTION('',(0.,-0.364692086679,0.931128176952)); +#130395 = ORIENTED_EDGE('',*,*,#130396,.F.); +#130396 = EDGE_CURVE('',#130397,#130387,#130399,.T.); +#130397 = VERTEX_POINT('',#130398); +#130398 = CARTESIAN_POINT('',(8.5,-2.7319,-1.882546810603)); +#130399 = LINE('',#130400,#130401); +#130400 = CARTESIAN_POINT('',(8.5,-2.7319,-1.882546810603)); +#130401 = VECTOR('',#130402,1.); +#130402 = DIRECTION('',(0.,0.,1.)); +#130403 = ORIENTED_EDGE('',*,*,#130404,.F.); +#130404 = EDGE_CURVE('',#130405,#130397,#130407,.T.); +#130405 = VERTEX_POINT('',#130406); +#130406 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.952759578025)); +#130407 = LINE('',#130408,#130409); +#130408 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.952759578025)); +#130409 = VECTOR('',#130410,1.); +#130410 = DIRECTION('',(0.,0.364692042391,0.931128194298)); +#130411 = ORIENTED_EDGE('',*,*,#130412,.F.); +#130412 = EDGE_CURVE('',#130413,#130405,#130415,.T.); +#130413 = VERTEX_POINT('',#130414); +#130414 = CARTESIAN_POINT('',(8.5,-2.800650013113,-2.008929789013)); +#130415 = LINE('',#130416,#130417); +#130416 = CARTESIAN_POINT('',(8.5,-2.800650013113,-2.008929789013)); +#130417 = VECTOR('',#130418,1.); +#130418 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#130419 = ORIENTED_EDGE('',*,*,#130420,.F.); +#130420 = EDGE_CURVE('',#130421,#130413,#130423,.T.); +#130421 = VERTEX_POINT('',#130422); +#130422 = CARTESIAN_POINT('',(8.5,-2.869399986887,-2.051057447253)); +#130423 = LINE('',#130424,#130425); +#130424 = CARTESIAN_POINT('',(8.5,-2.869399986887,-2.051057447253)); +#130425 = VECTOR('',#130426,1.); +#130426 = DIRECTION('',(0.,0.852653313443,0.522477106747)); +#130427 = ORIENTED_EDGE('',*,*,#130428,.F.); +#130428 = EDGE_CURVE('',#130429,#130421,#130431,.T.); +#130429 = VERTEX_POINT('',#130430); +#130430 = CARTESIAN_POINT('',(8.5,-2.93815,-2.0651)); +#130431 = LINE('',#130432,#130433); +#130432 = CARTESIAN_POINT('',(8.5,-2.93815,-2.0651)); +#130433 = VECTOR('',#130434,1.); +#130434 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#130435 = ORIENTED_EDGE('',*,*,#130436,.F.); +#130436 = EDGE_CURVE('',#130437,#130429,#130439,.T.); +#130437 = VERTEX_POINT('',#130438); +#130438 = CARTESIAN_POINT('',(8.5,-3.006899993443,-2.0651)); +#130439 = LINE('',#130440,#130441); +#130440 = CARTESIAN_POINT('',(8.5,-3.006899993443,-2.0651)); +#130441 = VECTOR('',#130442,1.); +#130442 = DIRECTION('',(0.,1.,0.)); +#130443 = ORIENTED_EDGE('',*,*,#130444,.F.); +#130444 = EDGE_CURVE('',#130445,#130437,#130447,.T.); +#130445 = VERTEX_POINT('',#130446); +#130446 = CARTESIAN_POINT('',(8.5,-3.075649996722,-2.051057447253)); +#130447 = LINE('',#130448,#130449); +#130448 = CARTESIAN_POINT('',(8.5,-3.075649996722,-2.051057447253)); +#130449 = VECTOR('',#130450,1.); +#130450 = DIRECTION('',(0.,0.979770707714,-0.200123362717)); +#130451 = ORIENTED_EDGE('',*,*,#130452,.F.); +#130452 = EDGE_CURVE('',#130453,#130445,#130455,.T.); +#130453 = VERTEX_POINT('',#130454); +#130454 = CARTESIAN_POINT('',(8.5,-3.1444,-2.008929789013)); +#130455 = LINE('',#130456,#130457); +#130456 = CARTESIAN_POINT('',(8.5,-3.1444,-2.008929789013)); +#130457 = VECTOR('',#130458,1.); +#130458 = DIRECTION('',(0.,0.852653413332,-0.522476943733)); +#130459 = ORIENTED_EDGE('',*,*,#130460,.F.); +#130460 = EDGE_CURVE('',#130461,#130453,#130463,.T.); +#130461 = VERTEX_POINT('',#130462); +#130462 = CARTESIAN_POINT('',(8.5,-3.18565,-1.952759578025)); +#130463 = LINE('',#130464,#130465); +#130464 = CARTESIAN_POINT('',(8.5,-3.18565,-1.952759578025)); +#130465 = VECTOR('',#130466,1.); +#130466 = DIRECTION('',(0.,0.591909515086,-0.806004420553)); +#130467 = ORIENTED_EDGE('',*,*,#130468,.F.); +#130468 = EDGE_CURVE('',#130469,#130461,#130471,.T.); +#130469 = VERTEX_POINT('',#130470); +#130470 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.882546810603)); +#130471 = LINE('',#130472,#130473); +#130472 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.882546810603)); +#130473 = VECTOR('',#130474,1.); +#130474 = DIRECTION('',(0.,0.364691886909,-0.931128255195)); +#130475 = ORIENTED_EDGE('',*,*,#130476,.F.); +#130476 = EDGE_CURVE('',#130477,#130469,#130479,.T.); +#130477 = VERTEX_POINT('',#130478); +#130478 = CARTESIAN_POINT('',(8.5,-3.2269,-1.784248930311)); +#130479 = LINE('',#130480,#130481); +#130480 = CARTESIAN_POINT('',(8.5,-3.2269,-1.784248930311)); +#130481 = VECTOR('',#130482,1.); +#130482 = DIRECTION('',(0.,0.138532203308,-0.990357929562)); +#130483 = ORIENTED_EDGE('',*,*,#130484,.F.); +#130484 = EDGE_CURVE('',#130485,#130477,#130487,.T.); +#130485 = VERTEX_POINT('',#130486); +#130486 = CARTESIAN_POINT('',(8.5,-3.2269,-1.685951069689)); +#130487 = LINE('',#130488,#130489); +#130488 = CARTESIAN_POINT('',(8.5,-3.2269,-1.685951069689)); +#130489 = VECTOR('',#130490,1.); +#130490 = DIRECTION('',(0.,0.,-1.)); +#130491 = ORIENTED_EDGE('',*,*,#130492,.F.); +#130492 = EDGE_CURVE('',#130493,#130485,#130495,.T.); +#130493 = VERTEX_POINT('',#130494); +#130494 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.587653209066)); +#130495 = LINE('',#130496,#130497); +#130496 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.587653209066)); +#130497 = VECTOR('',#130498,1.); +#130498 = DIRECTION('',(0.,-0.138532230496,-0.990357925759)); +#130499 = ORIENTED_EDGE('',*,*,#130500,.F.); +#130500 = EDGE_CURVE('',#130501,#130493,#130503,.T.); +#130501 = VERTEX_POINT('',#130502); +#130502 = CARTESIAN_POINT('',(8.5,-3.18565,-1.51744041214)); +#130503 = LINE('',#130504,#130505); +#130504 = CARTESIAN_POINT('',(8.5,-3.18565,-1.51744041214)); +#130505 = VECTOR('',#130506,1.); +#130506 = DIRECTION('',(0.,-0.364691754043,-0.931128307234)); +#130507 = ORIENTED_EDGE('',*,*,#130508,.F.); +#130508 = EDGE_CURVE('',#130509,#130501,#130511,.T.); +#130509 = VERTEX_POINT('',#130510); +#130510 = CARTESIAN_POINT('',(8.5,-3.1444,-1.46127020607)); +#130511 = LINE('',#130512,#130513); +#130512 = CARTESIAN_POINT('',(8.5,-3.1444,-1.46127020607)); +#130513 = VECTOR('',#130514,1.); +#130514 = DIRECTION('',(0.,-0.59190954875,-0.806004395831)); +#130515 = ORIENTED_EDGE('',*,*,#130516,.F.); +#130516 = EDGE_CURVE('',#130517,#130509,#130519,.T.); +#130517 = VERTEX_POINT('',#130518); +#130518 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.419142551517)); +#130519 = LINE('',#130520,#130521); +#130520 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.419142551517)); +#130521 = VECTOR('',#130522,1.); +#130522 = DIRECTION('',(0.,-0.852653433709,-0.522476910479)); +#130523 = ORIENTED_EDGE('',*,*,#130524,.F.); +#130524 = EDGE_CURVE('',#130525,#130517,#130527,.T.); +#130525 = VERTEX_POINT('',#130526); +#130526 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.4051)); +#130527 = LINE('',#130528,#130529); +#130528 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.4051)); +#130529 = VECTOR('',#130530,1.); +#130530 = DIRECTION('',(0.,-0.979770711149,-0.200123345899)); +#130531 = ORIENTED_EDGE('',*,*,#130532,.F.); +#130532 = EDGE_CURVE('',#130533,#130525,#130535,.T.); +#130533 = VERTEX_POINT('',#130534); +#130534 = CARTESIAN_POINT('',(8.5,-2.951900006557,-1.4051)); +#130535 = LINE('',#130536,#130537); +#130536 = CARTESIAN_POINT('',(8.5,-2.951900006557,-1.4051)); +#130537 = VECTOR('',#130538,1.); +#130538 = DIRECTION('',(0.,-1.,0.)); +#130539 = ORIENTED_EDGE('',*,*,#130540,.F.); +#130540 = EDGE_CURVE('',#130541,#130533,#130543,.T.); +#130541 = VERTEX_POINT('',#130542); +#130542 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.419142551517)); +#130543 = LINE('',#130544,#130545); +#130544 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.419142551517)); +#130545 = VECTOR('',#130546,1.); +#130546 = DIRECTION('',(0.,-0.979770705536,0.200123373381)); +#130547 = ORIENTED_EDGE('',*,*,#130548,.F.); +#130548 = EDGE_CURVE('',#130549,#130541,#130551,.T.); +#130549 = VERTEX_POINT('',#130550); +#130550 = CARTESIAN_POINT('',(8.5,-2.8144,-1.46127020607)); +#130551 = LINE('',#130552,#130553); +#130552 = CARTESIAN_POINT('',(8.5,-2.8144,-1.46127020607)); +#130553 = VECTOR('',#130554,1.); +#130554 = DIRECTION('',(0.,-0.852653467006,0.522476856141)); +#130555 = ORIENTED_EDGE('',*,*,#130556,.F.); +#130556 = EDGE_CURVE('',#130557,#130549,#130559,.T.); +#130557 = VERTEX_POINT('',#130558); +#130558 = CARTESIAN_POINT('',(8.5,-2.77315,-1.51744041214)); +#130559 = LINE('',#130560,#130561); +#130560 = CARTESIAN_POINT('',(8.5,-2.77315,-1.51744041214)); +#130561 = VECTOR('',#130562,1.); +#130562 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#130563 = ORIENTED_EDGE('',*,*,#130564,.F.); +#130564 = EDGE_CURVE('',#130565,#130557,#130567,.T.); +#130565 = VERTEX_POINT('',#130566); +#130566 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.559568066692)); +#130567 = LINE('',#130568,#130569); +#130568 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.559568066692)); +#130569 = VECTOR('',#130570,1.); +#130570 = DIRECTION('',(0.,-0.310279797551,0.950645279393)); +#130571 = ORIENTED_EDGE('',*,*,#130572,.F.); +#130572 = EDGE_CURVE('',#130573,#130565,#130575,.T.); +#130573 = VERTEX_POINT('',#130574); +#130574 = CARTESIAN_POINT('',(8.5,-2.828149986887,-1.559568066692)); +#130575 = LINE('',#130576,#130577); +#130576 = CARTESIAN_POINT('',(8.5,-2.828149986887,-1.559568066692)); +#130577 = VECTOR('',#130578,1.); +#130578 = DIRECTION('',(0.,1.,0.)); +#130579 = ORIENTED_EDGE('',*,*,#130580,.F.); +#130580 = EDGE_CURVE('',#130581,#130573,#130583,.T.); +#130581 = VERTEX_POINT('',#130582); +#130582 = CARTESIAN_POINT('',(8.5,-2.85565,-1.51744041214)); +#130583 = LINE('',#130584,#130585); +#130584 = CARTESIAN_POINT('',(8.5,-2.85565,-1.51744041214)); +#130585 = VECTOR('',#130586,1.); +#130586 = DIRECTION('',(0.,0.546622729396,-0.837379001234)); +#130587 = ORIENTED_EDGE('',*,*,#130588,.F.); +#130588 = EDGE_CURVE('',#130589,#130581,#130591,.T.); +#130589 = VERTEX_POINT('',#130590); +#130590 = CARTESIAN_POINT('',(8.5,-2.8969,-1.489355309105)); +#130591 = LINE('',#130592,#130593); +#130592 = CARTESIAN_POINT('',(8.5,-2.8969,-1.489355309105)); +#130593 = VECTOR('',#130594,1.); +#130594 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#130595 = ORIENTED_EDGE('',*,*,#130596,.F.); +#130596 = EDGE_CURVE('',#130597,#130589,#130599,.T.); +#130597 = VERTEX_POINT('',#130598); +#130598 = CARTESIAN_POINT('',(8.5,-2.93815,-1.475312757587)); +#130599 = LINE('',#130600,#130601); +#130600 = CARTESIAN_POINT('',(8.5,-2.93815,-1.475312757587)); +#130601 = VECTOR('',#130602,1.); +#130602 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#130603 = ORIENTED_EDGE('',*,*,#130604,.F.); +#130604 = EDGE_CURVE('',#130605,#130597,#130607,.T.); +#130605 = VERTEX_POINT('',#130606); +#130606 = CARTESIAN_POINT('',(8.5,-3.02065,-1.475312757587)); +#130607 = LINE('',#130608,#130609); +#130608 = CARTESIAN_POINT('',(8.5,-3.02065,-1.475312757587)); +#130609 = VECTOR('',#130610,1.); +#130610 = DIRECTION('',(0.,1.,0.)); +#130611 = ORIENTED_EDGE('',*,*,#130612,.F.); +#130612 = EDGE_CURVE('',#130613,#130605,#130615,.T.); +#130613 = VERTEX_POINT('',#130614); +#130614 = CARTESIAN_POINT('',(8.5,-3.0619,-1.489355309105)); +#130615 = LINE('',#130616,#130617); +#130616 = CARTESIAN_POINT('',(8.5,-3.0619,-1.489355309105)); +#130617 = VECTOR('',#130618,1.); +#130618 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#130619 = ORIENTED_EDGE('',*,*,#130620,.F.); +#130620 = EDGE_CURVE('',#130621,#130613,#130623,.T.); +#130621 = VERTEX_POINT('',#130622); +#130622 = CARTESIAN_POINT('',(8.5,-3.10315,-1.51744041214)); +#130623 = LINE('',#130624,#130625); +#130624 = CARTESIAN_POINT('',(8.5,-3.10315,-1.51744041214)); +#130625 = VECTOR('',#130626,1.); +#130626 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#130627 = ORIENTED_EDGE('',*,*,#130628,.F.); +#130628 = EDGE_CURVE('',#130629,#130621,#130631,.T.); +#130629 = VERTEX_POINT('',#130630); +#130630 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.559568066692)); +#130631 = LINE('',#130632,#130633); +#130632 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.559568066692)); +#130633 = VECTOR('',#130634,1.); +#130634 = DIRECTION('',(0.,0.546622592319,0.837379090715)); +#130635 = ORIENTED_EDGE('',*,*,#130636,.F.); +#130636 = EDGE_CURVE('',#130637,#130629,#130639,.T.); +#130637 = VERTEX_POINT('',#130638); +#130638 = CARTESIAN_POINT('',(8.5,-3.1444,-1.601695760584)); +#130639 = LINE('',#130640,#130641); +#130640 = CARTESIAN_POINT('',(8.5,-3.1444,-1.601695760584)); +#130641 = VECTOR('',#130642,1.); +#130642 = DIRECTION('',(0.,0.310279736268,0.950645299395)); +#130643 = ORIENTED_EDGE('',*,*,#130644,.F.); +#130644 = EDGE_CURVE('',#130645,#130637,#130647,.T.); +#130645 = VERTEX_POINT('',#130646); +#130646 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.685951069689)); +#130647 = LINE('',#130648,#130649); +#130648 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.685951069689)); +#130649 = VECTOR('',#130650,1.); +#130650 = DIRECTION('',(0.,0.16106381521,0.986943994069)); +#130651 = ORIENTED_EDGE('',*,*,#130652,.F.); +#130652 = EDGE_CURVE('',#130653,#130645,#130655,.T.); +#130653 = VERTEX_POINT('',#130654); +#130654 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.714036172724)); +#130655 = LINE('',#130656,#130657); +#130656 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.714036172724)); +#130657 = VECTOR('',#130658,1.); +#130658 = DIRECTION('',(0.,0.,1.)); +#130659 = ORIENTED_EDGE('',*,*,#130660,.F.); +#130660 = EDGE_CURVE('',#130661,#130653,#130663,.T.); +#130661 = VERTEX_POINT('',#130662); +#130662 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.657865966654)); +#130663 = LINE('',#130664,#130665); +#130664 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.657865966654)); +#130665 = VECTOR('',#130666,1.); +#130666 = DIRECTION('',(0.,-0.826599294405,-0.562790908322)); +#130667 = ORIENTED_EDGE('',*,*,#130668,.F.); +#130668 = EDGE_CURVE('',#130669,#130661,#130671,.T.); +#130669 = VERTEX_POINT('',#130670); +#130670 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.643823415136)); +#130671 = LINE('',#130672,#130673); +#130672 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.643823415136)); +#130673 = VECTOR('',#130674,1.); +#130674 = DIRECTION('',(0.,-0.979770711149,-0.200123345899)); +#130675 = ORIENTED_EDGE('',*,*,#130676,.F.); +#130676 = EDGE_CURVE('',#130677,#130669,#130679,.T.); +#130677 = VERTEX_POINT('',#130678); +#130678 = CARTESIAN_POINT('',(8.5,-2.93815,-1.643823415136)); +#130679 = LINE('',#130680,#130681); +#130680 = CARTESIAN_POINT('',(8.5,-2.93815,-1.643823415136)); +#130681 = VECTOR('',#130682,1.); +#130682 = DIRECTION('',(0.,-1.,0.)); +#130683 = ORIENTED_EDGE('',*,*,#130684,.F.); +#130684 = EDGE_CURVE('',#130685,#130677,#130687,.T.); +#130685 = VERTEX_POINT('',#130686); +#130686 = CARTESIAN_POINT('',(8.5,-2.869399986887,-1.657865966654)); +#130687 = LINE('',#130688,#130689); +#130688 = CARTESIAN_POINT('',(8.5,-2.869399986887,-1.657865966654)); +#130689 = VECTOR('',#130690,1.); +#130690 = DIRECTION('',(0.,-0.979770716763,0.200123318418)); +#130691 = ORIENTED_EDGE('',*,*,#130692,.F.); +#130692 = EDGE_CURVE('',#130693,#130685,#130695,.T.); +#130693 = VERTEX_POINT('',#130694); +#130694 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.699993621206)); +#130695 = LINE('',#130696,#130697); +#130696 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.699993621206)); +#130697 = VECTOR('',#130698,1.); +#130698 = DIRECTION('',(0.,-0.85265333382,0.522477073493)); +#130699 = ORIENTED_EDGE('',*,*,#130700,.F.); +#130700 = EDGE_CURVE('',#130389,#130693,#130701,.T.); +#130701 = LINE('',#130702,#130703); +#130702 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.742121275759)); +#130703 = VECTOR('',#130704,1.); +#130704 = DIRECTION('',(0.,-0.699624835187,0.714510384802)); +#130705 = FACE_BOUND('',#130706,.T.); +#130706 = EDGE_LOOP('',(#130707,#130717,#130725,#130733,#130741,#130749, + #130757,#130765,#130773,#130781,#130789,#130797,#130805,#130813, + #130821,#130829,#130837,#130845,#130853,#130861,#130869,#130877, + #130885,#130893,#130901,#130909)); +#130707 = ORIENTED_EDGE('',*,*,#130708,.F.); +#130708 = EDGE_CURVE('',#130709,#130711,#130713,.T.); +#130709 = VERTEX_POINT('',#130710); +#130710 = CARTESIAN_POINT('',(8.5,-2.60815,-1.601695760584)); +#130711 = VERTEX_POINT('',#130712); +#130712 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.671908518171)); +#130713 = LINE('',#130714,#130715); +#130714 = CARTESIAN_POINT('',(8.5,-2.60815,-1.601695760584)); +#130715 = VECTOR('',#130716,1.); +#130716 = DIRECTION('',(0.,-0.192182676904,-0.98135916906)); +#130717 = ORIENTED_EDGE('',*,*,#130718,.F.); +#130718 = EDGE_CURVE('',#130719,#130709,#130721,.T.); +#130719 = VERTEX_POINT('',#130720); +#130720 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.559568066692)); +#130721 = LINE('',#130722,#130723); +#130722 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.559568066692)); +#130723 = VECTOR('',#130724,1.); +#130724 = DIRECTION('',(0.,-0.310279535704,-0.950645364857)); +#130725 = ORIENTED_EDGE('',*,*,#130726,.F.); +#130726 = EDGE_CURVE('',#130727,#130719,#130729,.T.); +#130727 = VERTEX_POINT('',#130728); +#130728 = CARTESIAN_POINT('',(8.5,-2.5669,-1.503397860622)); +#130729 = LINE('',#130730,#130731); +#130730 = CARTESIAN_POINT('',(8.5,-2.5669,-1.503397860622)); +#130731 = VECTOR('',#130732,1.); +#130732 = DIRECTION('',(0.,-0.439713664957,-0.898138014367)); +#130733 = ORIENTED_EDGE('',*,*,#130734,.F.); +#130734 = EDGE_CURVE('',#130735,#130727,#130737,.T.); +#130735 = VERTEX_POINT('',#130736); +#130736 = CARTESIAN_POINT('',(8.5,-2.52565,-1.46127020607)); +#130737 = LINE('',#130738,#130739); +#130738 = CARTESIAN_POINT('',(8.5,-2.52565,-1.46127020607)); +#130739 = VECTOR('',#130740,1.); +#130740 = DIRECTION('',(0.,-0.699624835187,-0.714510384802)); +#130741 = ORIENTED_EDGE('',*,*,#130742,.F.); +#130742 = EDGE_CURVE('',#130743,#130735,#130745,.T.); +#130743 = VERTEX_POINT('',#130744); +#130744 = CARTESIAN_POINT('',(8.5,-2.456900026226,-1.419142551517)); +#130745 = LINE('',#130746,#130747); +#130746 = CARTESIAN_POINT('',(8.5,-2.456900026226,-1.419142551517)); +#130747 = VECTOR('',#130748,1.); +#130748 = DIRECTION('',(0.,-0.85265333382,-0.522477073493)); +#130749 = ORIENTED_EDGE('',*,*,#130750,.F.); +#130750 = EDGE_CURVE('',#130751,#130743,#130753,.T.); +#130751 = VERTEX_POINT('',#130752); +#130752 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.4051)); +#130753 = LINE('',#130754,#130755); +#130754 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.4051)); +#130755 = VECTOR('',#130756,1.); +#130756 = DIRECTION('',(0.,-0.985821173093,-0.167799328608)); +#130757 = ORIENTED_EDGE('',*,*,#130758,.F.); +#130758 = EDGE_CURVE('',#130759,#130751,#130761,.T.); +#130759 = VERTEX_POINT('',#130760); +#130760 = CARTESIAN_POINT('',(8.5,-2.291900026226,-1.419142551517)); +#130761 = LINE('',#130762,#130763); +#130762 = CARTESIAN_POINT('',(8.5,-2.291900026226,-1.419142551517)); +#130763 = VECTOR('',#130764,1.); +#130764 = DIRECTION('',(0.,-0.985821173093,0.167799328608)); +#130765 = ORIENTED_EDGE('',*,*,#130766,.F.); +#130766 = EDGE_CURVE('',#130767,#130759,#130769,.T.); +#130767 = VERTEX_POINT('',#130768); +#130768 = CARTESIAN_POINT('',(8.5,-2.223149973774,-1.46127020607)); +#130769 = LINE('',#130770,#130771); +#130770 = CARTESIAN_POINT('',(8.5,-2.223149973774,-1.46127020607)); +#130771 = VECTOR('',#130772,1.); +#130772 = DIRECTION('',(0.,-0.852653600191,0.52247663879)); +#130773 = ORIENTED_EDGE('',*,*,#130774,.F.); +#130774 = EDGE_CURVE('',#130775,#130767,#130777,.T.); +#130775 = VERTEX_POINT('',#130776); +#130776 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.503397860622)); +#130777 = LINE('',#130778,#130779); +#130778 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.503397860622)); +#130779 = VECTOR('',#130780,1.); +#130780 = DIRECTION('',(0.,-0.699624835187,0.714510384802)); +#130781 = ORIENTED_EDGE('',*,*,#130782,.F.); +#130782 = EDGE_CURVE('',#130783,#130775,#130785,.T.); +#130783 = VERTEX_POINT('',#130784); +#130784 = CARTESIAN_POINT('',(8.5,-2.1544,-1.559568066692)); +#130785 = LINE('',#130786,#130787); +#130786 = CARTESIAN_POINT('',(8.5,-2.1544,-1.559568066692)); +#130787 = VECTOR('',#130788,1.); +#130788 = DIRECTION('',(0.,-0.43971315756,0.898138262779)); +#130789 = ORIENTED_EDGE('',*,*,#130790,.F.); +#130790 = EDGE_CURVE('',#130791,#130783,#130793,.T.); +#130791 = VERTEX_POINT('',#130792); +#130792 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.601695760584)); +#130793 = LINE('',#130794,#130795); +#130794 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.601695760584)); +#130795 = VECTOR('',#130796,1.); +#130796 = DIRECTION('',(0.,-0.310280337958,0.95064510301)); +#130797 = ORIENTED_EDGE('',*,*,#130798,.F.); +#130798 = EDGE_CURVE('',#130799,#130791,#130801,.T.); +#130799 = VERTEX_POINT('',#130800); +#130800 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.671908518171)); +#130801 = LINE('',#130802,#130803); +#130802 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.671908518171)); +#130803 = VECTOR('',#130804,1.); +#130804 = DIRECTION('',(0.,-0.192182147373,0.98135927276)); +#130805 = ORIENTED_EDGE('',*,*,#130806,.F.); +#130806 = EDGE_CURVE('',#130807,#130799,#130809,.T.); +#130807 = VERTEX_POINT('',#130808); +#130808 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.798291481829)); +#130809 = LINE('',#130810,#130811); +#130810 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.798291481829)); +#130811 = VECTOR('',#130812,1.); +#130812 = DIRECTION('',(0.,0.,1.)); +#130813 = ORIENTED_EDGE('',*,*,#130814,.F.); +#130814 = EDGE_CURVE('',#130815,#130807,#130817,.T.); +#130815 = VERTEX_POINT('',#130816); +#130816 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.868504259086)); +#130817 = LINE('',#130818,#130819); +#130818 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.868504259086)); +#130819 = VECTOR('',#130820,1.); +#130820 = DIRECTION('',(0.,0.192182095523,0.981359282913)); +#130821 = ORIENTED_EDGE('',*,*,#130822,.F.); +#130822 = EDGE_CURVE('',#130823,#130815,#130825,.T.); +#130823 = VERTEX_POINT('',#130824); +#130824 = CARTESIAN_POINT('',(8.5,-2.1544,-1.910631913638)); +#130825 = LINE('',#130826,#130827); +#130826 = CARTESIAN_POINT('',(8.5,-2.1544,-1.910631913638)); +#130827 = VECTOR('',#130828,1.); +#130828 = DIRECTION('',(0.,0.310280599805,0.950645017546)); +#130829 = ORIENTED_EDGE('',*,*,#130830,.F.); +#130830 = EDGE_CURVE('',#130831,#130823,#130833,.T.); +#130831 = VERTEX_POINT('',#130832); +#130832 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.966802129543)); +#130833 = LINE('',#130834,#130835); +#130834 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.966802129543)); +#130835 = VECTOR('',#130836,1.); +#130836 = DIRECTION('',(0.,0.439713095457,0.898138293184)); +#130837 = ORIENTED_EDGE('',*,*,#130838,.F.); +#130838 = EDGE_CURVE('',#130839,#130831,#130841,.T.); +#130839 = VERTEX_POINT('',#130840); +#130840 = CARTESIAN_POINT('',(8.5,-2.223149973774,-2.008929789013)); +#130841 = LINE('',#130842,#130843); +#130842 = CARTESIAN_POINT('',(8.5,-2.223149973774,-2.008929789013)); +#130843 = VECTOR('',#130844,1.); +#130844 = DIRECTION('',(0.,0.699624793495,0.714510425625)); +#130845 = ORIENTED_EDGE('',*,*,#130846,.F.); +#130846 = EDGE_CURVE('',#130847,#130839,#130849,.T.); +#130847 = VERTEX_POINT('',#130848); +#130848 = CARTESIAN_POINT('',(8.5,-2.291900026226,-2.051057447253)); +#130849 = LINE('',#130850,#130851); +#130850 = CARTESIAN_POINT('',(8.5,-2.291900026226,-2.051057447253)); +#130851 = VECTOR('',#130852,1.); +#130852 = DIRECTION('',(0.,0.852653579815,0.522476672043)); +#130853 = ORIENTED_EDGE('',*,*,#130854,.F.); +#130854 = EDGE_CURVE('',#130855,#130847,#130857,.T.); +#130855 = VERTEX_POINT('',#130856); +#130856 = CARTESIAN_POINT('',(8.5,-2.374400026226,-2.0651)); +#130857 = LINE('',#130858,#130859); +#130858 = CARTESIAN_POINT('',(8.5,-2.374400026226,-2.0651)); +#130859 = VECTOR('',#130860,1.); +#130860 = DIRECTION('',(0.,0.985821170663,0.167799342885)); +#130861 = ORIENTED_EDGE('',*,*,#130862,.F.); +#130862 = EDGE_CURVE('',#130863,#130855,#130865,.T.); +#130863 = VERTEX_POINT('',#130864); +#130864 = CARTESIAN_POINT('',(8.5,-2.456900026226,-2.051057447253)); +#130865 = LINE('',#130866,#130867); +#130866 = CARTESIAN_POINT('',(8.5,-2.456900026226,-2.051057447253)); +#130867 = VECTOR('',#130868,1.); +#130868 = DIRECTION('',(0.,0.985821170663,-0.167799342885)); +#130869 = ORIENTED_EDGE('',*,*,#130870,.F.); +#130870 = EDGE_CURVE('',#130871,#130863,#130873,.T.); +#130871 = VERTEX_POINT('',#130872); +#130872 = CARTESIAN_POINT('',(8.5,-2.52565,-2.008929789013)); +#130873 = LINE('',#130874,#130875); +#130874 = CARTESIAN_POINT('',(8.5,-2.52565,-2.008929789013)); +#130875 = VECTOR('',#130876,1.); +#130876 = DIRECTION('',(0.,0.852653313443,-0.522477106747)); +#130877 = ORIENTED_EDGE('',*,*,#130878,.F.); +#130878 = EDGE_CURVE('',#130879,#130871,#130881,.T.); +#130879 = VERTEX_POINT('',#130880); +#130880 = CARTESIAN_POINT('',(8.5,-2.5669,-1.966802129543)); +#130881 = LINE('',#130882,#130883); +#130882 = CARTESIAN_POINT('',(8.5,-2.5669,-1.966802129543)); +#130883 = VECTOR('',#130884,1.); +#130884 = DIRECTION('',(0.,0.699624793495,-0.714510425625)); +#130885 = ORIENTED_EDGE('',*,*,#130886,.F.); +#130886 = EDGE_CURVE('',#130887,#130879,#130889,.T.); +#130887 = VERTEX_POINT('',#130888); +#130888 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.910631913638)); +#130889 = LINE('',#130890,#130891); +#130890 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.910631913638)); +#130891 = VECTOR('',#130892,1.); +#130892 = DIRECTION('',(0.,0.439713602853,-0.898138044771)); +#130893 = ORIENTED_EDGE('',*,*,#130894,.F.); +#130894 = EDGE_CURVE('',#130895,#130887,#130897,.T.); +#130895 = VERTEX_POINT('',#130896); +#130896 = CARTESIAN_POINT('',(8.5,-2.60815,-1.868504259086)); +#130897 = LINE('',#130898,#130899); +#130898 = CARTESIAN_POINT('',(8.5,-2.60815,-1.868504259086)); +#130899 = VECTOR('',#130900,1.); +#130900 = DIRECTION('',(0.,0.310279797551,-0.950645279393)); +#130901 = ORIENTED_EDGE('',*,*,#130902,.F.); +#130902 = EDGE_CURVE('',#130903,#130895,#130905,.T.); +#130903 = VERTEX_POINT('',#130904); +#130904 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.798291481829)); +#130905 = LINE('',#130906,#130907); +#130906 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.798291481829)); +#130907 = VECTOR('',#130908,1.); +#130908 = DIRECTION('',(0.,0.192182625054,-0.981359179214)); +#130909 = ORIENTED_EDGE('',*,*,#130910,.F.); +#130910 = EDGE_CURVE('',#130711,#130903,#130911,.T.); +#130911 = LINE('',#130912,#130913); +#130912 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.671908518171)); +#130913 = VECTOR('',#130914,1.); +#130914 = DIRECTION('',(0.,0.,-1.)); +#130915 = PLANE('',#130916); +#130916 = AXIS2_PLACEMENT_3D('',#130917,#130918,#130919); +#130917 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#130918 = DIRECTION('',(1.,0.,0.)); +#130919 = DIRECTION('',(0.,-1.,0.)); +#130920 = ADVANCED_FACE('',(#130921),#131083,.T.); +#130921 = FACE_BOUND('',#130922,.T.); +#130922 = EDGE_LOOP('',(#130923,#130933,#130941,#130949,#130957,#130965, + #130973,#130981,#130989,#130997,#131005,#131013,#131021,#131029, + #131037,#131045,#131053,#131061,#131069,#131077)); +#130923 = ORIENTED_EDGE('',*,*,#130924,.F.); +#130924 = EDGE_CURVE('',#130925,#130927,#130929,.T.); +#130925 = VERTEX_POINT('',#130926); +#130926 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.756163827276)); +#130927 = VERTEX_POINT('',#130928); +#130928 = CARTESIAN_POINT('',(8.5,-2.8144,-1.784248930311)); +#130929 = LINE('',#130930,#130931); +#130930 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.756163827276)); +#130931 = VECTOR('',#130932,1.); +#130932 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#130933 = ORIENTED_EDGE('',*,*,#130934,.F.); +#130934 = EDGE_CURVE('',#130935,#130925,#130937,.T.); +#130935 = VERTEX_POINT('',#130936); +#130936 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.728078724241)); +#130937 = LINE('',#130938,#130939); +#130938 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.728078724241)); +#130939 = VECTOR('',#130940,1.); +#130940 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#130941 = ORIENTED_EDGE('',*,*,#130942,.F.); +#130942 = EDGE_CURVE('',#130943,#130935,#130945,.T.); +#130943 = VERTEX_POINT('',#130944); +#130944 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.714036172724)); +#130945 = LINE('',#130946,#130947); +#130946 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.714036172724)); +#130947 = VECTOR('',#130948,1.); +#130948 = DIRECTION('',(0.,0.946649870891,-0.322263901086)); +#130949 = ORIENTED_EDGE('',*,*,#130950,.F.); +#130950 = EDGE_CURVE('',#130951,#130943,#130953,.T.); +#130951 = VERTEX_POINT('',#130952); +#130952 = CARTESIAN_POINT('',(8.5,-3.02065,-1.714036172724)); +#130953 = LINE('',#130954,#130955); +#130954 = CARTESIAN_POINT('',(8.5,-3.02065,-1.714036172724)); +#130955 = VECTOR('',#130956,1.); +#130956 = DIRECTION('',(0.,1.,0.)); +#130957 = ORIENTED_EDGE('',*,*,#130958,.F.); +#130958 = EDGE_CURVE('',#130959,#130951,#130961,.T.); +#130959 = VERTEX_POINT('',#130960); +#130960 = CARTESIAN_POINT('',(8.5,-3.0619,-1.728078724241)); +#130961 = LINE('',#130962,#130963); +#130962 = CARTESIAN_POINT('',(8.5,-3.0619,-1.728078724241)); +#130963 = VECTOR('',#130964,1.); +#130964 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#130965 = ORIENTED_EDGE('',*,*,#130966,.F.); +#130966 = EDGE_CURVE('',#130967,#130959,#130969,.T.); +#130967 = VERTEX_POINT('',#130968); +#130968 = CARTESIAN_POINT('',(8.5,-3.10315,-1.756163827276)); +#130969 = LINE('',#130970,#130971); +#130970 = CARTESIAN_POINT('',(8.5,-3.10315,-1.756163827276)); +#130971 = VECTOR('',#130972,1.); +#130972 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#130973 = ORIENTED_EDGE('',*,*,#130974,.F.); +#130974 = EDGE_CURVE('',#130975,#130967,#130977,.T.); +#130975 = VERTEX_POINT('',#130976); +#130976 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.784248930311)); +#130977 = LINE('',#130978,#130979); +#130978 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.784248930311)); +#130979 = VECTOR('',#130980,1.); +#130980 = DIRECTION('',(0.,0.699624877766,0.71451034311)); +#130981 = ORIENTED_EDGE('',*,*,#130982,.F.); +#130982 = EDGE_CURVE('',#130983,#130975,#130985,.T.); +#130983 = VERTEX_POINT('',#130984); +#130984 = CARTESIAN_POINT('',(8.5,-3.1444,-1.826376604533)); +#130985 = LINE('',#130986,#130987); +#130986 = CARTESIAN_POINT('',(8.5,-3.1444,-1.826376604533)); +#130987 = VECTOR('',#130988,1.); +#130988 = DIRECTION('',(0.,0.310279867191,0.950645256663)); +#130989 = ORIENTED_EDGE('',*,*,#130990,.F.); +#130990 = EDGE_CURVE('',#130991,#130983,#130993,.T.); +#130991 = VERTEX_POINT('',#130992); +#130992 = CARTESIAN_POINT('',(8.5,-3.1444,-1.868504259086)); +#130993 = LINE('',#130994,#130995); +#130994 = CARTESIAN_POINT('',(8.5,-3.1444,-1.868504259086)); +#130995 = VECTOR('',#130996,1.); +#130996 = DIRECTION('',(0.,0.,1.)); +#130997 = ORIENTED_EDGE('',*,*,#130998,.F.); +#130998 = EDGE_CURVE('',#130999,#130991,#131001,.T.); +#130999 = VERTEX_POINT('',#131000); +#131000 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.910631913638)); +#131001 = LINE('',#131002,#131003); +#131002 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.910631913638)); +#131003 = VECTOR('',#131004,1.); +#131004 = DIRECTION('',(0.,-0.310279998114,0.950645213931)); +#131005 = ORIENTED_EDGE('',*,*,#131006,.F.); +#131006 = EDGE_CURVE('',#131007,#130999,#131009,.T.); +#131007 = VERTEX_POINT('',#131008); +#131008 = CARTESIAN_POINT('',(8.5,-3.10315,-1.952759578025)); +#131009 = LINE('',#131010,#131011); +#131010 = CARTESIAN_POINT('',(8.5,-3.10315,-1.952759578025)); +#131011 = VECTOR('',#131012,1.); +#131012 = DIRECTION('',(0.,-0.546622502839,0.837379149126)); +#131013 = ORIENTED_EDGE('',*,*,#131014,.F.); +#131014 = EDGE_CURVE('',#131015,#131007,#131017,.T.); +#131015 = VERTEX_POINT('',#131016); +#131016 = CARTESIAN_POINT('',(8.5,-3.0619,-1.98084468106)); +#131017 = LINE('',#131018,#131019); +#131018 = CARTESIAN_POINT('',(8.5,-3.0619,-1.98084468106)); +#131019 = VECTOR('',#131020,1.); +#131020 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#131021 = ORIENTED_EDGE('',*,*,#131022,.F.); +#131022 = EDGE_CURVE('',#131023,#131015,#131025,.T.); +#131023 = VERTEX_POINT('',#131024); +#131024 = CARTESIAN_POINT('',(8.5,-3.02065,-1.994887232578)); +#131025 = LINE('',#131026,#131027); +#131026 = CARTESIAN_POINT('',(8.5,-3.02065,-1.994887232578)); +#131027 = VECTOR('',#131028,1.); +#131028 = DIRECTION('',(0.,-0.94664991777,0.322263763377)); +#131029 = ORIENTED_EDGE('',*,*,#131030,.F.); +#131030 = EDGE_CURVE('',#131031,#131023,#131033,.T.); +#131031 = VERTEX_POINT('',#131032); +#131032 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.994887232578)); +#131033 = LINE('',#131034,#131035); +#131034 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.994887232578)); +#131035 = VECTOR('',#131036,1.); +#131036 = DIRECTION('',(0.,-1.,0.)); +#131037 = ORIENTED_EDGE('',*,*,#131038,.F.); +#131038 = EDGE_CURVE('',#131039,#131031,#131041,.T.); +#131039 = VERTEX_POINT('',#131040); +#131040 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.98084468106)); +#131041 = LINE('',#131042,#131043); +#131042 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.98084468106)); +#131043 = VECTOR('',#131044,1.); +#131044 = DIRECTION('',(0.,-0.946649870891,-0.322263901086)); +#131045 = ORIENTED_EDGE('',*,*,#131046,.F.); +#131046 = EDGE_CURVE('',#131047,#131039,#131049,.T.); +#131047 = VERTEX_POINT('',#131048); +#131048 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.952759578025)); +#131049 = LINE('',#131050,#131051); +#131050 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.952759578025)); +#131051 = VECTOR('',#131052,1.); +#131052 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#131053 = ORIENTED_EDGE('',*,*,#131054,.F.); +#131054 = EDGE_CURVE('',#131055,#131047,#131057,.T.); +#131055 = VERTEX_POINT('',#131056); +#131056 = CARTESIAN_POINT('',(8.5,-2.8144,-1.910631913638)); +#131057 = LINE('',#131058,#131059); +#131058 = CARTESIAN_POINT('',(8.5,-2.8144,-1.910631913638)); +#131059 = VECTOR('',#131060,1.); +#131060 = DIRECTION('',(0.,-0.546622639915,-0.837379059645)); +#131061 = ORIENTED_EDGE('',*,*,#131062,.F.); +#131062 = EDGE_CURVE('',#131063,#131055,#131065,.T.); +#131063 = VERTEX_POINT('',#131064); +#131064 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.868504259086)); +#131065 = LINE('',#131066,#131067); +#131066 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.868504259086)); +#131067 = VECTOR('',#131068,1.); +#131068 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#131069 = ORIENTED_EDGE('',*,*,#131070,.F.); +#131070 = EDGE_CURVE('',#131071,#131063,#131073,.T.); +#131071 = VERTEX_POINT('',#131072); +#131072 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.826376604533)); +#131073 = LINE('',#131074,#131075); +#131074 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.826376604533)); +#131075 = VECTOR('',#131076,1.); +#131076 = DIRECTION('',(0.,0.,-1.)); +#131077 = ORIENTED_EDGE('',*,*,#131078,.F.); +#131078 = EDGE_CURVE('',#130927,#131071,#131079,.T.); +#131079 = LINE('',#131080,#131081); +#131080 = CARTESIAN_POINT('',(8.5,-2.8144,-1.784248930311)); +#131081 = VECTOR('',#131082,1.); +#131082 = DIRECTION('',(0.,0.310279666627,-0.950645322125)); +#131083 = PLANE('',#131084); +#131084 = AXIS2_PLACEMENT_3D('',#131085,#131086,#131087); +#131085 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#131086 = DIRECTION('',(1.,0.,0.)); +#131087 = DIRECTION('',(0.,-1.,0.)); +#131088 = ADVANCED_FACE('',(#131089),#131235,.T.); +#131089 = FACE_BOUND('',#131090,.T.); +#131090 = EDGE_LOOP('',(#131091,#131101,#131109,#131117,#131125,#131133, + #131141,#131149,#131157,#131165,#131173,#131181,#131189,#131197, + #131205,#131213,#131221,#131229)); +#131091 = ORIENTED_EDGE('',*,*,#131092,.F.); +#131092 = EDGE_CURVE('',#131093,#131095,#131097,.T.); +#131093 = VERTEX_POINT('',#131094); +#131094 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.784248930311)); +#131095 = VERTEX_POINT('',#131096); +#131096 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.685951069689)); +#131097 = LINE('',#131098,#131099); +#131098 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.784248930311)); +#131099 = VECTOR('',#131100,1.); +#131100 = DIRECTION('',(0.,0.,1.)); +#131101 = ORIENTED_EDGE('',*,*,#131102,.F.); +#131102 = EDGE_CURVE('',#131103,#131093,#131105,.T.); +#131103 = VERTEX_POINT('',#131104); +#131104 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.868504259086)); +#131105 = LINE('',#131106,#131107); +#131106 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.868504259086)); +#131107 = VECTOR('',#131108,1.); +#131108 = DIRECTION('',(0.,-0.161063161412,0.986944100766)); +#131109 = ORIENTED_EDGE('',*,*,#131110,.F.); +#131110 = EDGE_CURVE('',#131111,#131103,#131113,.T.); +#131111 = VERTEX_POINT('',#131112); +#131112 = CARTESIAN_POINT('',(8.5,-2.4844,-1.952759578025)); +#131113 = LINE('',#131114,#131115); +#131114 = CARTESIAN_POINT('',(8.5,-2.4844,-1.952759578025)); +#131115 = VECTOR('',#131116,1.); +#131116 = DIRECTION('',(0.,-0.546622684656,0.83737903044)); +#131117 = ORIENTED_EDGE('',*,*,#131118,.F.); +#131118 = EDGE_CURVE('',#131119,#131111,#131121,.T.); +#131119 = VERTEX_POINT('',#131120); +#131120 = CARTESIAN_POINT('',(8.5,-2.44315,-1.98084468106)); +#131121 = LINE('',#131122,#131123); +#131122 = CARTESIAN_POINT('',(8.5,-2.44315,-1.98084468106)); +#131123 = VECTOR('',#131124,1.); +#131124 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#131125 = ORIENTED_EDGE('',*,*,#131126,.F.); +#131126 = EDGE_CURVE('',#131127,#131119,#131129,.T.); +#131127 = VERTEX_POINT('',#131128); +#131128 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.994887232578)); +#131129 = LINE('',#131130,#131131); +#131130 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.994887232578)); +#131131 = VECTOR('',#131132,1.); +#131132 = DIRECTION('',(0.,-0.97977069431,0.200123428343)); +#131133 = ORIENTED_EDGE('',*,*,#131134,.F.); +#131134 = EDGE_CURVE('',#131135,#131127,#131137,.T.); +#131135 = VERTEX_POINT('',#131136); +#131136 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.98084468106)); +#131137 = LINE('',#131138,#131139); +#131138 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.98084468106)); +#131139 = VECTOR('',#131140,1.); +#131140 = DIRECTION('',(0.,-0.979770739215,-0.200123208493)); +#131141 = ORIENTED_EDGE('',*,*,#131142,.F.); +#131142 = EDGE_CURVE('',#131143,#131135,#131145,.T.); +#131143 = VERTEX_POINT('',#131144); +#131144 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.952759578025)); +#131145 = LINE('',#131146,#131147); +#131146 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.952759578025)); +#131147 = VECTOR('',#131148,1.); +#131148 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#131149 = ORIENTED_EDGE('',*,*,#131150,.F.); +#131150 = EDGE_CURVE('',#131151,#131143,#131153,.T.); +#131151 = VERTEX_POINT('',#131152); +#131152 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.868504259086)); +#131153 = LINE('',#131154,#131155); +#131154 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.868504259086)); +#131155 = VECTOR('',#131156,1.); +#131156 = DIRECTION('',(0.,-0.546622136349,-0.837379388362)); +#131157 = ORIENTED_EDGE('',*,*,#131158,.F.); +#131158 = EDGE_CURVE('',#131159,#131151,#131161,.T.); +#131159 = VERTEX_POINT('',#131160); +#131160 = CARTESIAN_POINT('',(8.5,-2.19565,-1.784248930311)); +#131161 = LINE('',#131162,#131163); +#131162 = CARTESIAN_POINT('',(8.5,-2.19565,-1.784248930311)); +#131163 = VECTOR('',#131164,1.); +#131164 = DIRECTION('',(0.,-0.161064059119,-0.986943954265)); +#131165 = ORIENTED_EDGE('',*,*,#131166,.F.); +#131166 = EDGE_CURVE('',#131167,#131159,#131169,.T.); +#131167 = VERTEX_POINT('',#131168); +#131168 = CARTESIAN_POINT('',(8.5,-2.19565,-1.685951069689)); +#131169 = LINE('',#131170,#131171); +#131170 = CARTESIAN_POINT('',(8.5,-2.19565,-1.685951069689)); +#131171 = VECTOR('',#131172,1.); +#131172 = DIRECTION('',(0.,0.,-1.)); +#131173 = ORIENTED_EDGE('',*,*,#131174,.F.); +#131174 = EDGE_CURVE('',#131175,#131167,#131177,.T.); +#131175 = VERTEX_POINT('',#131176); +#131176 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.601695760584)); +#131177 = LINE('',#131178,#131179); +#131178 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.601695760584)); +#131179 = VECTOR('',#131180,1.); +#131180 = DIRECTION('',(0.,0.161064095744,-0.986943948288)); +#131181 = ORIENTED_EDGE('',*,*,#131182,.F.); +#131182 = EDGE_CURVE('',#131183,#131175,#131185,.T.); +#131183 = VERTEX_POINT('',#131184); +#131184 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.51744041214)); +#131185 = LINE('',#131186,#131187); +#131186 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.51744041214)); +#131187 = VECTOR('',#131188,1.); +#131188 = DIRECTION('',(0.,0.546622002129,-0.837379475978)); +#131189 = ORIENTED_EDGE('',*,*,#131190,.F.); +#131190 = EDGE_CURVE('',#131191,#131183,#131193,.T.); +#131191 = VERTEX_POINT('',#131192); +#131192 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.489355309105)); +#131193 = LINE('',#131194,#131195); +#131194 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.489355309105)); +#131195 = VECTOR('',#131196,1.); +#131196 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#131197 = ORIENTED_EDGE('',*,*,#131198,.F.); +#131198 = EDGE_CURVE('',#131199,#131191,#131201,.T.); +#131199 = VERTEX_POINT('',#131200); +#131200 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.475312757587)); +#131201 = LINE('',#131202,#131203); +#131202 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.475312757587)); +#131203 = VECTOR('',#131204,1.); +#131204 = DIRECTION('',(0.,0.979770739215,-0.200123208493)); +#131205 = ORIENTED_EDGE('',*,*,#131206,.F.); +#131206 = EDGE_CURVE('',#131207,#131199,#131209,.T.); +#131207 = VERTEX_POINT('',#131208); +#131208 = CARTESIAN_POINT('',(8.5,-2.44315,-1.489355309105)); +#131209 = LINE('',#131210,#131211); +#131210 = CARTESIAN_POINT('',(8.5,-2.44315,-1.489355309105)); +#131211 = VECTOR('',#131212,1.); +#131212 = DIRECTION('',(0.,0.97977069431,0.200123428343)); +#131213 = ORIENTED_EDGE('',*,*,#131214,.F.); +#131214 = EDGE_CURVE('',#131215,#131207,#131217,.T.); +#131215 = VERTEX_POINT('',#131216); +#131216 = CARTESIAN_POINT('',(8.5,-2.4844,-1.51744041214)); +#131217 = LINE('',#131218,#131219); +#131218 = CARTESIAN_POINT('',(8.5,-2.4844,-1.51744041214)); +#131219 = VECTOR('',#131220,1.); +#131220 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#131221 = ORIENTED_EDGE('',*,*,#131222,.F.); +#131222 = EDGE_CURVE('',#131223,#131215,#131225,.T.); +#131223 = VERTEX_POINT('',#131224); +#131224 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.601695760584)); +#131225 = LINE('',#131226,#131227); +#131226 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.601695760584)); +#131227 = VECTOR('',#131228,1.); +#131228 = DIRECTION('',(0.,0.546622550435,0.837379118056)); +#131229 = ORIENTED_EDGE('',*,*,#131230,.F.); +#131230 = EDGE_CURVE('',#131095,#131223,#131231,.T.); +#131231 = LINE('',#131232,#131233); +#131232 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.685951069689)); +#131233 = VECTOR('',#131234,1.); +#131234 = DIRECTION('',(0.,0.161063198037,0.986944094789)); +#131235 = PLANE('',#131236); +#131236 = AXIS2_PLACEMENT_3D('',#131237,#131238,#131239); +#131237 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#131238 = DIRECTION('',(1.,0.,0.)); +#131239 = DIRECTION('',(0.,-1.,0.)); +#131240 = ADVANCED_FACE('',(#131241),#131323,.T.); +#131241 = FACE_BOUND('',#131242,.T.); +#131242 = EDGE_LOOP('',(#131243,#131253,#131261,#131269,#131277,#131285, + #131293,#131301,#131309,#131317)); +#131243 = ORIENTED_EDGE('',*,*,#131244,.F.); +#131244 = EDGE_CURVE('',#131245,#131247,#131249,.T.); +#131245 = VERTEX_POINT('',#131246); +#131246 = CARTESIAN_POINT('',(8.5,2.4573,-1.660419154263)); +#131247 = VERTEX_POINT('',#131248); +#131248 = CARTESIAN_POINT('',(8.5,2.4573,-1.48169573555)); +#131249 = LINE('',#131250,#131251); +#131250 = CARTESIAN_POINT('',(8.5,2.4573,-1.660419154263)); +#131251 = VECTOR('',#131252,1.); +#131252 = DIRECTION('',(0.,0.,1.)); +#131253 = ORIENTED_EDGE('',*,*,#131254,.F.); +#131254 = EDGE_CURVE('',#131255,#131245,#131257,.T.); +#131255 = VERTEX_POINT('',#131256); +#131256 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.660419154263)); +#131257 = LINE('',#131258,#131259); +#131258 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.660419154263)); +#131259 = VECTOR('',#131260,1.); +#131260 = DIRECTION('',(0.,-1.,0.)); +#131261 = ORIENTED_EDGE('',*,*,#131262,.F.); +#131262 = EDGE_CURVE('',#131263,#131255,#131265,.T.); +#131263 = VERTEX_POINT('',#131264); +#131264 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.647653198338)); +#131265 = LINE('',#131266,#131267); +#131266 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.647653198338)); +#131267 = VECTOR('',#131268,1.); +#131268 = DIRECTION('',(0.,-0.94664991777,-0.322263763377)); +#131269 = ORIENTED_EDGE('',*,*,#131270,.F.); +#131270 = EDGE_CURVE('',#131271,#131263,#131273,.T.); +#131271 = VERTEX_POINT('',#131272); +#131272 = CARTESIAN_POINT('',(8.5,2.7573,-1.622121286488)); +#131273 = LINE('',#131274,#131275); +#131274 = CARTESIAN_POINT('',(8.5,2.7573,-1.622121286488)); +#131275 = VECTOR('',#131276,1.); +#131276 = DIRECTION('',(0.,-0.699625005502,-0.714510218035)); +#131277 = ORIENTED_EDGE('',*,*,#131278,.F.); +#131278 = EDGE_CURVE('',#131279,#131271,#131281,.T.); +#131279 = VERTEX_POINT('',#131280); +#131280 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.583823418713)); +#131281 = LINE('',#131282,#131283); +#131282 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.583823418713)); +#131283 = VECTOR('',#131284,1.); +#131284 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#131285 = ORIENTED_EDGE('',*,*,#131286,.F.); +#131286 = EDGE_CURVE('',#131287,#131279,#131289,.T.); +#131287 = VERTEX_POINT('',#131288); +#131288 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.558291506863)); +#131289 = LINE('',#131290,#131291); +#131290 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.558291506863)); +#131291 = VECTOR('',#131292,1.); +#131292 = DIRECTION('',(0.,0.,-1.)); +#131293 = ORIENTED_EDGE('',*,*,#131294,.F.); +#131294 = EDGE_CURVE('',#131295,#131287,#131297,.T.); +#131295 = VERTEX_POINT('',#131296); +#131296 = CARTESIAN_POINT('',(8.5,2.7573,-1.519993603325)); +#131297 = LINE('',#131298,#131299); +#131298 = CARTESIAN_POINT('',(8.5,2.7573,-1.519993603325)); +#131299 = VECTOR('',#131300,1.); +#131300 = DIRECTION('',(0.,0.310279535704,-0.950645364857)); +#131301 = ORIENTED_EDGE('',*,*,#131302,.F.); +#131302 = EDGE_CURVE('',#131303,#131295,#131305,.T.); +#131303 = VERTEX_POINT('',#131304); +#131304 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.494461691475)); +#131305 = LINE('',#131306,#131307); +#131306 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.494461691475)); +#131307 = VECTOR('',#131308,1.); +#131308 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#131309 = ORIENTED_EDGE('',*,*,#131310,.F.); +#131310 = EDGE_CURVE('',#131311,#131303,#131313,.T.); +#131311 = VERTEX_POINT('',#131312); +#131312 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.48169573555)); +#131313 = LINE('',#131314,#131315); +#131314 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.48169573555)); +#131315 = VECTOR('',#131316,1.); +#131316 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#131317 = ORIENTED_EDGE('',*,*,#131318,.F.); +#131318 = EDGE_CURVE('',#131247,#131311,#131319,.T.); +#131319 = LINE('',#131320,#131321); +#131320 = CARTESIAN_POINT('',(8.5,2.4573,-1.48169573555)); +#131321 = VECTOR('',#131322,1.); +#131322 = DIRECTION('',(0.,1.,0.)); +#131323 = PLANE('',#131324); +#131324 = AXIS2_PLACEMENT_3D('',#131325,#131326,#131327); +#131325 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#131326 = DIRECTION('',(1.,0.,0.)); +#131327 = DIRECTION('',(0.,-1.,0.)); +#131328 = ADVANCED_FACE('',(#131329),#131411,.T.); +#131329 = FACE_BOUND('',#131330,.T.); +#131330 = EDGE_LOOP('',(#131331,#131341,#131349,#131357,#131365,#131373, + #131381,#131389,#131397,#131405)); +#131331 = ORIENTED_EDGE('',*,*,#131332,.F.); +#131332 = EDGE_CURVE('',#131333,#131335,#131337,.T.); +#131333 = VERTEX_POINT('',#131334); +#131334 = CARTESIAN_POINT('',(8.5,2.7573,-1.775312757587)); +#131335 = VERTEX_POINT('',#131336); +#131336 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.813610643244)); +#131337 = LINE('',#131338,#131339); +#131338 = CARTESIAN_POINT('',(8.5,2.7573,-1.775312757587)); +#131339 = VECTOR('',#131340,1.); +#131340 = DIRECTION('',(0.,0.310279666627,-0.950645322125)); +#131341 = ORIENTED_EDGE('',*,*,#131342,.F.); +#131342 = EDGE_CURVE('',#131343,#131333,#131345,.T.); +#131343 = VERTEX_POINT('',#131344); +#131344 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.749780845737)); +#131345 = LINE('',#131346,#131347); +#131346 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.749780845737)); +#131347 = VECTOR('',#131348,1.); +#131348 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#131349 = ORIENTED_EDGE('',*,*,#131350,.F.); +#131350 = EDGE_CURVE('',#131351,#131343,#131353,.T.); +#131351 = VERTEX_POINT('',#131352); +#131352 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.737014889812)); +#131353 = LINE('',#131354,#131355); +#131354 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.737014889812)); +#131355 = VECTOR('',#131356,1.); +#131356 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#131357 = ORIENTED_EDGE('',*,*,#131358,.F.); +#131358 = EDGE_CURVE('',#131359,#131351,#131361,.T.); +#131359 = VERTEX_POINT('',#131360); +#131360 = CARTESIAN_POINT('',(8.5,2.4573,-1.737014889812)); +#131361 = LINE('',#131362,#131363); +#131362 = CARTESIAN_POINT('',(8.5,2.4573,-1.737014889812)); +#131363 = VECTOR('',#131364,1.); +#131364 = DIRECTION('',(0.,1.,0.)); +#131365 = ORIENTED_EDGE('',*,*,#131366,.F.); +#131366 = EDGE_CURVE('',#131367,#131359,#131369,.T.); +#131367 = VERTEX_POINT('',#131368); +#131368 = CARTESIAN_POINT('',(8.5,2.4573,-1.928504255509)); +#131369 = LINE('',#131370,#131371); +#131370 = CARTESIAN_POINT('',(8.5,2.4573,-1.928504255509)); +#131371 = VECTOR('',#131372,1.); +#131372 = DIRECTION('',(0.,0.,1.)); +#131373 = ORIENTED_EDGE('',*,*,#131374,.F.); +#131374 = EDGE_CURVE('',#131375,#131367,#131377,.T.); +#131375 = VERTEX_POINT('',#131376); +#131376 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.928504255509)); +#131377 = LINE('',#131378,#131379); +#131378 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.928504255509)); +#131379 = VECTOR('',#131380,1.); +#131380 = DIRECTION('',(0.,-1.,0.)); +#131381 = ORIENTED_EDGE('',*,*,#131382,.F.); +#131382 = EDGE_CURVE('',#131383,#131375,#131385,.T.); +#131383 = VERTEX_POINT('',#131384); +#131384 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.915738299584)); +#131385 = LINE('',#131386,#131387); +#131386 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.915738299584)); +#131387 = VECTOR('',#131388,1.); +#131388 = DIRECTION('',(0.,-0.94664991777,-0.322263763377)); +#131389 = ORIENTED_EDGE('',*,*,#131390,.F.); +#131390 = EDGE_CURVE('',#131391,#131383,#131393,.T.); +#131391 = VERTEX_POINT('',#131392); +#131392 = CARTESIAN_POINT('',(8.5,2.7573,-1.890206378794)); +#131393 = LINE('',#131394,#131395); +#131394 = CARTESIAN_POINT('',(8.5,2.7573,-1.890206378794)); +#131395 = VECTOR('',#131396,1.); +#131396 = DIRECTION('',(0.,-0.699624880427,-0.714510340504)); +#131397 = ORIENTED_EDGE('',*,*,#131398,.F.); +#131398 = EDGE_CURVE('',#131399,#131391,#131401,.T.); +#131399 = VERTEX_POINT('',#131400); +#131400 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.851908511019)); +#131401 = LINE('',#131402,#131403); +#131402 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.851908511019)); +#131403 = VECTOR('',#131404,1.); +#131404 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#131405 = ORIENTED_EDGE('',*,*,#131406,.F.); +#131406 = EDGE_CURVE('',#131335,#131399,#131407,.T.); +#131407 = LINE('',#131408,#131409); +#131408 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.813610643244)); +#131409 = VECTOR('',#131410,1.); +#131410 = DIRECTION('',(0.,0.,-1.)); +#131411 = PLANE('',#131412); +#131412 = AXIS2_PLACEMENT_3D('',#131413,#131414,#131415); +#131413 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#131414 = DIRECTION('',(1.,0.,0.)); +#131415 = DIRECTION('',(0.,-1.,0.)); +#131416 = ADVANCED_FACE('',(#131417),#131433,.F.); +#131417 = FACE_BOUND('',#131418,.T.); +#131418 = EDGE_LOOP('',(#131419,#131425,#131426,#131432)); +#131419 = ORIENTED_EDGE('',*,*,#131420,.T.); +#131420 = EDGE_CURVE('',#129837,#130264,#131421,.T.); +#131421 = LINE('',#131422,#131423); +#131422 = CARTESIAN_POINT('',(8.9,3.092329219213,-5.75)); +#131423 = VECTOR('',#131424,1.); +#131424 = DIRECTION('',(-1.,0.,0.)); +#131425 = ORIENTED_EDGE('',*,*,#130289,.F.); +#131426 = ORIENTED_EDGE('',*,*,#131427,.F.); +#131427 = EDGE_CURVE('',#129846,#130282,#131428,.T.); +#131428 = LINE('',#131429,#131430); +#131429 = CARTESIAN_POINT('',(8.9,3.55,-5.75)); +#131430 = VECTOR('',#131431,1.); +#131431 = DIRECTION('',(-1.,0.,0.)); +#131432 = ORIENTED_EDGE('',*,*,#129845,.T.); +#131433 = PLANE('',#131434); +#131434 = AXIS2_PLACEMENT_3D('',#131435,#131436,#131437); +#131435 = CARTESIAN_POINT('',(8.9,3.55,-5.75)); +#131436 = DIRECTION('',(0.,0.,1.)); +#131437 = DIRECTION('',(0.,-1.,0.)); +#131438 = ADVANCED_FACE('',(#131439),#131445,.F.); +#131439 = FACE_BOUND('',#131440,.T.); +#131440 = EDGE_LOOP('',(#131441,#131442,#131443,#131444)); +#131441 = ORIENTED_EDGE('',*,*,#131427,.T.); +#131442 = ORIENTED_EDGE('',*,*,#130281,.F.); +#131443 = ORIENTED_EDGE('',*,*,#128728,.F.); +#131444 = ORIENTED_EDGE('',*,*,#129853,.T.); +#131445 = PLANE('',#131446); +#131446 = AXIS2_PLACEMENT_3D('',#131447,#131448,#131449); +#131447 = CARTESIAN_POINT('',(8.9,3.55,-8.3)); +#131448 = DIRECTION('',(0.,1.,0.)); +#131449 = DIRECTION('',(0.,-0.,1.)); +#131450 = ADVANCED_FACE('',(#131451),#131462,.T.); +#131451 = FACE_BOUND('',#131452,.T.); +#131452 = EDGE_LOOP('',(#131453,#131459,#131460,#131461)); +#131453 = ORIENTED_EDGE('',*,*,#131454,.T.); +#131454 = EDGE_CURVE('',#129829,#130266,#131455,.T.); +#131455 = LINE('',#131456,#131457); +#131456 = CARTESIAN_POINT('',(8.9,1.,-7.842329219213)); +#131457 = VECTOR('',#131458,1.); +#131458 = DIRECTION('',(-1.,0.,0.)); +#131459 = ORIENTED_EDGE('',*,*,#130263,.F.); +#131460 = ORIENTED_EDGE('',*,*,#131420,.F.); +#131461 = ORIENTED_EDGE('',*,*,#129836,.F.); +#131462 = CYLINDRICAL_SURFACE('',#131463,3.25); +#131463 = AXIS2_PLACEMENT_3D('',#131464,#131465,#131466); +#131464 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#131465 = DIRECTION('',(1.,0.,0.)); +#131466 = DIRECTION('',(0.,0.,-1.)); +#131467 = ADVANCED_FACE('',(#131468),#131474,.F.); +#131468 = FACE_BOUND('',#131469,.T.); +#131469 = EDGE_LOOP('',(#131470,#131471,#131472,#131473)); +#131470 = ORIENTED_EDGE('',*,*,#128744,.T.); +#131471 = ORIENTED_EDGE('',*,*,#130274,.F.); +#131472 = ORIENTED_EDGE('',*,*,#131454,.F.); +#131473 = ORIENTED_EDGE('',*,*,#129828,.F.); +#131474 = PLANE('',#131475); +#131475 = AXIS2_PLACEMENT_3D('',#131476,#131477,#131478); +#131476 = CARTESIAN_POINT('',(8.9,1.,-7.842329219213)); +#131477 = DIRECTION('',(0.,-1.,0.)); +#131478 = DIRECTION('',(1.,0.,0.)); +#131479 = ADVANCED_FACE('',(#131480),#131491,.F.); +#131480 = FACE_BOUND('',#131481,.T.); +#131481 = EDGE_LOOP('',(#131482,#131488,#131489,#131490)); +#131482 = ORIENTED_EDGE('',*,*,#131483,.T.); +#131483 = EDGE_CURVE('',#129813,#130304,#131484,.T.); +#131484 = LINE('',#131485,#131486); +#131485 = CARTESIAN_POINT('',(8.9,-1.,-7.842329219213)); +#131486 = VECTOR('',#131487,1.); +#131487 = DIRECTION('',(-1.,0.,0.)); +#131488 = ORIENTED_EDGE('',*,*,#130329,.F.); +#131489 = ORIENTED_EDGE('',*,*,#128760,.F.); +#131490 = ORIENTED_EDGE('',*,*,#129821,.T.); +#131491 = PLANE('',#131492); +#131492 = AXIS2_PLACEMENT_3D('',#131493,#131494,#131495); +#131493 = CARTESIAN_POINT('',(8.9,-1.,-8.3)); +#131494 = DIRECTION('',(0.,1.,0.)); +#131495 = DIRECTION('',(0.,-0.,1.)); +#131496 = ADVANCED_FACE('',(#131497),#131508,.T.); +#131497 = FACE_BOUND('',#131498,.T.); +#131498 = EDGE_LOOP('',(#131499,#131505,#131506,#131507)); +#131499 = ORIENTED_EDGE('',*,*,#131500,.T.); +#131500 = EDGE_CURVE('',#129805,#130306,#131501,.T.); +#131501 = LINE('',#131502,#131503); +#131502 = CARTESIAN_POINT('',(8.9,-3.092329219213,-5.75)); +#131503 = VECTOR('',#131504,1.); +#131504 = DIRECTION('',(-1.,0.,0.)); +#131505 = ORIENTED_EDGE('',*,*,#130303,.F.); +#131506 = ORIENTED_EDGE('',*,*,#131483,.F.); +#131507 = ORIENTED_EDGE('',*,*,#129812,.F.); +#131508 = CYLINDRICAL_SURFACE('',#131509,3.25); +#131509 = AXIS2_PLACEMENT_3D('',#131510,#131511,#131512); +#131510 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#131511 = DIRECTION('',(1.,0.,0.)); +#131512 = DIRECTION('',(0.,0.,-1.)); +#131513 = ADVANCED_FACE('',(#131514),#131525,.F.); +#131514 = FACE_BOUND('',#131515,.T.); +#131515 = EDGE_LOOP('',(#131516,#131522,#131523,#131524)); +#131516 = ORIENTED_EDGE('',*,*,#131517,.T.); +#131517 = EDGE_CURVE('',#129797,#130315,#131518,.T.); +#131518 = LINE('',#131519,#131520); +#131519 = CARTESIAN_POINT('',(8.9,-3.55,-5.75)); +#131520 = VECTOR('',#131521,1.); +#131521 = DIRECTION('',(-1.,0.,0.)); +#131522 = ORIENTED_EDGE('',*,*,#130314,.F.); +#131523 = ORIENTED_EDGE('',*,*,#131500,.F.); +#131524 = ORIENTED_EDGE('',*,*,#129804,.T.); +#131525 = PLANE('',#131526); +#131526 = AXIS2_PLACEMENT_3D('',#131527,#131528,#131529); +#131527 = CARTESIAN_POINT('',(8.9,-3.092329219213,-5.75)); +#131528 = DIRECTION('',(0.,0.,1.)); +#131529 = DIRECTION('',(0.,-1.,0.)); +#131530 = ADVANCED_FACE('',(#131531),#131537,.F.); +#131531 = FACE_BOUND('',#131532,.T.); +#131532 = EDGE_LOOP('',(#131533,#131534,#131535,#131536)); +#131533 = ORIENTED_EDGE('',*,*,#128776,.T.); +#131534 = ORIENTED_EDGE('',*,*,#130322,.F.); +#131535 = ORIENTED_EDGE('',*,*,#131517,.F.); +#131536 = ORIENTED_EDGE('',*,*,#129796,.F.); +#131537 = PLANE('',#131538); +#131538 = AXIS2_PLACEMENT_3D('',#131539,#131540,#131541); +#131539 = CARTESIAN_POINT('',(8.9,-3.55,-5.75)); +#131540 = DIRECTION('',(0.,-1.,0.)); +#131541 = DIRECTION('',(1.,0.,0.)); +#131542 = ADVANCED_FACE('',(#131543),#131559,.F.); +#131543 = FACE_BOUND('',#131544,.T.); +#131544 = EDGE_LOOP('',(#131545,#131551,#131552,#131558)); +#131545 = ORIENTED_EDGE('',*,*,#131546,.T.); +#131546 = EDGE_CURVE('',#129890,#130344,#131547,.T.); +#131547 = LINE('',#131548,#131549); +#131548 = CARTESIAN_POINT('',(8.9,-3.092329219213,-3.75)); +#131549 = VECTOR('',#131550,1.); +#131550 = DIRECTION('',(-1.,0.,0.)); +#131551 = ORIENTED_EDGE('',*,*,#130378,.F.); +#131552 = ORIENTED_EDGE('',*,*,#131553,.F.); +#131553 = EDGE_CURVE('',#129866,#130371,#131554,.T.); +#131554 = LINE('',#131555,#131556); +#131555 = CARTESIAN_POINT('',(8.9,-3.55,-3.75)); +#131556 = VECTOR('',#131557,1.); +#131557 = DIRECTION('',(-1.,0.,0.)); +#131558 = ORIENTED_EDGE('',*,*,#129898,.T.); +#131559 = PLANE('',#131560); +#131560 = AXIS2_PLACEMENT_3D('',#131561,#131562,#131563); +#131561 = CARTESIAN_POINT('',(8.9,-3.55,-3.75)); +#131562 = DIRECTION('',(0.,0.,-1.)); +#131563 = DIRECTION('',(-1.,0.,0.)); +#131564 = ADVANCED_FACE('',(#131565),#131576,.F.); +#131565 = FACE_BOUND('',#131566,.T.); +#131566 = EDGE_LOOP('',(#131567,#131568,#131569,#131575)); +#131567 = ORIENTED_EDGE('',*,*,#131553,.T.); +#131568 = ORIENTED_EDGE('',*,*,#130370,.F.); +#131569 = ORIENTED_EDGE('',*,*,#131570,.F.); +#131570 = EDGE_CURVE('',#129864,#130363,#131571,.T.); +#131571 = LINE('',#131572,#131573); +#131572 = CARTESIAN_POINT('',(8.9,-3.55,-1.2)); +#131573 = VECTOR('',#131574,1.); +#131574 = DIRECTION('',(-1.,0.,0.)); +#131575 = ORIENTED_EDGE('',*,*,#129863,.T.); +#131576 = PLANE('',#131577); +#131577 = AXIS2_PLACEMENT_3D('',#131578,#131579,#131580); +#131578 = CARTESIAN_POINT('',(8.9,-3.55,-1.2)); +#131579 = DIRECTION('',(0.,-1.,0.)); +#131580 = DIRECTION('',(1.,0.,0.)); +#131581 = ADVANCED_FACE('',(#131582),#131593,.F.); +#131582 = FACE_BOUND('',#131583,.T.); +#131583 = EDGE_LOOP('',(#131584,#131585,#131586,#131592)); +#131584 = ORIENTED_EDGE('',*,*,#131570,.T.); +#131585 = ORIENTED_EDGE('',*,*,#130362,.F.); +#131586 = ORIENTED_EDGE('',*,*,#131587,.F.); +#131587 = EDGE_CURVE('',#129874,#130355,#131588,.T.); +#131588 = LINE('',#131589,#131590); +#131589 = CARTESIAN_POINT('',(8.9,-1.,-1.2)); +#131590 = VECTOR('',#131591,1.); +#131591 = DIRECTION('',(-1.,0.,0.)); +#131592 = ORIENTED_EDGE('',*,*,#129873,.T.); +#131593 = PLANE('',#131594); +#131594 = AXIS2_PLACEMENT_3D('',#131595,#131596,#131597); +#131595 = CARTESIAN_POINT('',(8.9,-1.,-1.2)); +#131596 = DIRECTION('',(0.,0.,1.)); +#131597 = DIRECTION('',(0.,-1.,0.)); +#131598 = ADVANCED_FACE('',(#131599),#131610,.F.); +#131599 = FACE_BOUND('',#131600,.T.); +#131600 = EDGE_LOOP('',(#131601,#131602,#131603,#131609)); +#131601 = ORIENTED_EDGE('',*,*,#131587,.T.); +#131602 = ORIENTED_EDGE('',*,*,#130354,.F.); +#131603 = ORIENTED_EDGE('',*,*,#131604,.F.); +#131604 = EDGE_CURVE('',#129882,#130346,#131605,.T.); +#131605 = LINE('',#131606,#131607); +#131606 = CARTESIAN_POINT('',(8.9,-1.,-1.657670780787)); +#131607 = VECTOR('',#131608,1.); +#131608 = DIRECTION('',(-1.,0.,0.)); +#131609 = ORIENTED_EDGE('',*,*,#129881,.T.); +#131610 = PLANE('',#131611); +#131611 = AXIS2_PLACEMENT_3D('',#131612,#131613,#131614); +#131612 = CARTESIAN_POINT('',(8.9,-1.,-1.657670780787)); +#131613 = DIRECTION('',(0.,1.,0.)); +#131614 = DIRECTION('',(0.,-0.,1.)); +#131615 = ADVANCED_FACE('',(#131616),#131622,.T.); +#131616 = FACE_BOUND('',#131617,.T.); +#131617 = EDGE_LOOP('',(#131618,#131619,#131620,#131621)); +#131618 = ORIENTED_EDGE('',*,*,#131604,.T.); +#131619 = ORIENTED_EDGE('',*,*,#130343,.F.); +#131620 = ORIENTED_EDGE('',*,*,#131546,.F.); +#131621 = ORIENTED_EDGE('',*,*,#129889,.F.); +#131622 = CYLINDRICAL_SURFACE('',#131623,3.25); +#131623 = AXIS2_PLACEMENT_3D('',#131624,#131625,#131626); +#131624 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#131625 = DIRECTION('',(1.,0.,0.)); +#131626 = DIRECTION('',(0.,0.,-1.)); +#131627 = ADVANCED_FACE('',(#131628),#131653,.T.); +#131628 = FACE_BOUND('',#131629,.T.); +#131629 = EDGE_LOOP('',(#131630,#131638,#131646,#131652)); +#131630 = ORIENTED_EDGE('',*,*,#131631,.T.); +#131631 = EDGE_CURVE('',#130693,#131632,#131634,.T.); +#131632 = VERTEX_POINT('',#131633); +#131633 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.699993621206)); +#131634 = LINE('',#131635,#131636); +#131635 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.699993621206)); +#131636 = VECTOR('',#131637,1.); +#131637 = DIRECTION('',(1.,-4.440892098501E-14,2.220446049251E-14)); +#131638 = ORIENTED_EDGE('',*,*,#131639,.F.); +#131639 = EDGE_CURVE('',#131640,#131632,#131642,.T.); +#131640 = VERTEX_POINT('',#131641); +#131641 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.742121275759)); +#131642 = LINE('',#131643,#131644); +#131643 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.742121275759)); +#131644 = VECTOR('',#131645,1.); +#131645 = DIRECTION('',(0.,-0.699624835187,0.714510384802)); +#131646 = ORIENTED_EDGE('',*,*,#131647,.F.); +#131647 = EDGE_CURVE('',#130389,#131640,#131648,.T.); +#131648 = LINE('',#131649,#131650); +#131649 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.742121275759)); +#131650 = VECTOR('',#131651,1.); +#131651 = DIRECTION('',(1.,0.,1.110223024625E-14)); +#131652 = ORIENTED_EDGE('',*,*,#130700,.T.); +#131653 = PLANE('',#131654); +#131654 = AXIS2_PLACEMENT_3D('',#131655,#131656,#131657); +#131655 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.742121275759)); +#131656 = DIRECTION('',(-0.,0.714510384802,0.699624835187)); +#131657 = DIRECTION('',(1.,0.,0.)); +#131658 = ADVANCED_FACE('',(#131659),#131677,.T.); +#131659 = FACE_BOUND('',#131660,.T.); +#131660 = EDGE_LOOP('',(#131661,#131662,#131670,#131676)); +#131661 = ORIENTED_EDGE('',*,*,#131647,.T.); +#131662 = ORIENTED_EDGE('',*,*,#131663,.F.); +#131663 = EDGE_CURVE('',#131664,#131640,#131666,.T.); +#131664 = VERTEX_POINT('',#131665); +#131665 = CARTESIAN_POINT('',(8.52,-2.7319,-1.812334033346)); +#131666 = LINE('',#131667,#131668); +#131667 = CARTESIAN_POINT('',(8.52,-2.7319,-1.812334033346)); +#131668 = VECTOR('',#131669,1.); +#131669 = DIRECTION('',(0.,-0.364692086679,0.931128176952)); +#131670 = ORIENTED_EDGE('',*,*,#131671,.F.); +#131671 = EDGE_CURVE('',#130387,#131664,#131672,.T.); +#131672 = LINE('',#131673,#131674); +#131673 = CARTESIAN_POINT('',(8.5,-2.7319,-1.812334033346)); +#131674 = VECTOR('',#131675,1.); +#131675 = DIRECTION('',(1.,0.,0.)); +#131676 = ORIENTED_EDGE('',*,*,#130386,.T.); +#131677 = PLANE('',#131678); +#131678 = AXIS2_PLACEMENT_3D('',#131679,#131680,#131681); +#131679 = CARTESIAN_POINT('',(8.5,-2.7319,-1.812334033346)); +#131680 = DIRECTION('',(-0.,0.931128176952,0.364692086679)); +#131681 = DIRECTION('',(1.,0.,0.)); +#131682 = ADVANCED_FACE('',(#131683),#131701,.T.); +#131683 = FACE_BOUND('',#131684,.T.); +#131684 = EDGE_LOOP('',(#131685,#131686,#131694,#131700)); +#131685 = ORIENTED_EDGE('',*,*,#131671,.T.); +#131686 = ORIENTED_EDGE('',*,*,#131687,.F.); +#131687 = EDGE_CURVE('',#131688,#131664,#131690,.T.); +#131688 = VERTEX_POINT('',#131689); +#131689 = CARTESIAN_POINT('',(8.52,-2.7319,-1.882546810603)); +#131690 = LINE('',#131691,#131692); +#131691 = CARTESIAN_POINT('',(8.52,-2.7319,-1.882546810603)); +#131692 = VECTOR('',#131693,1.); +#131693 = DIRECTION('',(0.,0.,1.)); +#131694 = ORIENTED_EDGE('',*,*,#131695,.F.); +#131695 = EDGE_CURVE('',#130397,#131688,#131696,.T.); +#131696 = LINE('',#131697,#131698); +#131697 = CARTESIAN_POINT('',(8.5,-2.7319,-1.882546810603)); +#131698 = VECTOR('',#131699,1.); +#131699 = DIRECTION('',(1.,0.,0.)); +#131700 = ORIENTED_EDGE('',*,*,#130396,.T.); +#131701 = PLANE('',#131702); +#131702 = AXIS2_PLACEMENT_3D('',#131703,#131704,#131705); +#131703 = CARTESIAN_POINT('',(8.5,-2.7319,-1.882546810603)); +#131704 = DIRECTION('',(0.,1.,0.)); +#131705 = DIRECTION('',(0.,-0.,1.)); +#131706 = ADVANCED_FACE('',(#131707),#131725,.T.); +#131707 = FACE_BOUND('',#131708,.T.); +#131708 = EDGE_LOOP('',(#131709,#131710,#131718,#131724)); +#131709 = ORIENTED_EDGE('',*,*,#131695,.T.); +#131710 = ORIENTED_EDGE('',*,*,#131711,.F.); +#131711 = EDGE_CURVE('',#131712,#131688,#131714,.T.); +#131712 = VERTEX_POINT('',#131713); +#131713 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.952759578025)); +#131714 = LINE('',#131715,#131716); +#131715 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.952759578025)); +#131716 = VECTOR('',#131717,1.); +#131717 = DIRECTION('',(0.,0.364692042391,0.931128194298)); +#131718 = ORIENTED_EDGE('',*,*,#131719,.F.); +#131719 = EDGE_CURVE('',#130405,#131712,#131720,.T.); +#131720 = LINE('',#131721,#131722); +#131721 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.952759578025)); +#131722 = VECTOR('',#131723,1.); +#131723 = DIRECTION('',(1.,-2.220446049251E-14,-2.220446049251E-14)); +#131724 = ORIENTED_EDGE('',*,*,#130404,.T.); +#131725 = PLANE('',#131726); +#131726 = AXIS2_PLACEMENT_3D('',#131727,#131728,#131729); +#131727 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.952759578025)); +#131728 = DIRECTION('',(0.,0.931128194298,-0.364692042391)); +#131729 = DIRECTION('',(0.,0.364692042391,0.931128194298)); +#131730 = ADVANCED_FACE('',(#131731),#131749,.T.); +#131731 = FACE_BOUND('',#131732,.T.); +#131732 = EDGE_LOOP('',(#131733,#131734,#131742,#131748)); +#131733 = ORIENTED_EDGE('',*,*,#131719,.T.); +#131734 = ORIENTED_EDGE('',*,*,#131735,.F.); +#131735 = EDGE_CURVE('',#131736,#131712,#131738,.T.); +#131736 = VERTEX_POINT('',#131737); +#131737 = CARTESIAN_POINT('',(8.52,-2.800650013113,-2.008929789013)); +#131738 = LINE('',#131739,#131740); +#131739 = CARTESIAN_POINT('',(8.52,-2.800650013113,-2.008929789013)); +#131740 = VECTOR('',#131741,1.); +#131741 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#131742 = ORIENTED_EDGE('',*,*,#131743,.F.); +#131743 = EDGE_CURVE('',#130413,#131736,#131744,.T.); +#131744 = LINE('',#131745,#131746); +#131745 = CARTESIAN_POINT('',(8.5,-2.800650013113,-2.008929789013)); +#131746 = VECTOR('',#131747,1.); +#131747 = DIRECTION('',(1.,0.,0.)); +#131748 = ORIENTED_EDGE('',*,*,#130412,.T.); +#131749 = PLANE('',#131750); +#131750 = AXIS2_PLACEMENT_3D('',#131751,#131752,#131753); +#131751 = CARTESIAN_POINT('',(8.5,-2.800650013113,-2.008929789013)); +#131752 = DIRECTION('',(0.,0.806004420553,-0.591909515086)); +#131753 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#131754 = ADVANCED_FACE('',(#131755),#131773,.T.); +#131755 = FACE_BOUND('',#131756,.T.); +#131756 = EDGE_LOOP('',(#131757,#131758,#131766,#131772)); +#131757 = ORIENTED_EDGE('',*,*,#131743,.T.); +#131758 = ORIENTED_EDGE('',*,*,#131759,.F.); +#131759 = EDGE_CURVE('',#131760,#131736,#131762,.T.); +#131760 = VERTEX_POINT('',#131761); +#131761 = CARTESIAN_POINT('',(8.52,-2.869399986887,-2.051057447253)); +#131762 = LINE('',#131763,#131764); +#131763 = CARTESIAN_POINT('',(8.52,-2.869399986887,-2.051057447253)); +#131764 = VECTOR('',#131765,1.); +#131765 = DIRECTION('',(0.,0.852653313443,0.522477106747)); +#131766 = ORIENTED_EDGE('',*,*,#131767,.F.); +#131767 = EDGE_CURVE('',#130421,#131760,#131768,.T.); +#131768 = LINE('',#131769,#131770); +#131769 = CARTESIAN_POINT('',(8.5,-2.869399986887,-2.051057447253)); +#131770 = VECTOR('',#131771,1.); +#131771 = DIRECTION('',(1.,0.,0.)); +#131772 = ORIENTED_EDGE('',*,*,#130420,.T.); +#131773 = PLANE('',#131774); +#131774 = AXIS2_PLACEMENT_3D('',#131775,#131776,#131777); +#131775 = CARTESIAN_POINT('',(8.5,-2.869399986887,-2.051057447253)); +#131776 = DIRECTION('',(0.,0.522477106747,-0.852653313443)); +#131777 = DIRECTION('',(0.,0.852653313443,0.522477106747)); +#131778 = ADVANCED_FACE('',(#131779),#131797,.T.); +#131779 = FACE_BOUND('',#131780,.T.); +#131780 = EDGE_LOOP('',(#131781,#131782,#131790,#131796)); +#131781 = ORIENTED_EDGE('',*,*,#131767,.T.); +#131782 = ORIENTED_EDGE('',*,*,#131783,.F.); +#131783 = EDGE_CURVE('',#131784,#131760,#131786,.T.); +#131784 = VERTEX_POINT('',#131785); +#131785 = CARTESIAN_POINT('',(8.52,-2.93815,-2.0651)); +#131786 = LINE('',#131787,#131788); +#131787 = CARTESIAN_POINT('',(8.52,-2.93815,-2.0651)); +#131788 = VECTOR('',#131789,1.); +#131789 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#131790 = ORIENTED_EDGE('',*,*,#131791,.F.); +#131791 = EDGE_CURVE('',#130429,#131784,#131792,.T.); +#131792 = LINE('',#131793,#131794); +#131793 = CARTESIAN_POINT('',(8.5,-2.93815,-2.0651)); +#131794 = VECTOR('',#131795,1.); +#131795 = DIRECTION('',(1.,0.,0.)); +#131796 = ORIENTED_EDGE('',*,*,#130428,.T.); +#131797 = PLANE('',#131798); +#131798 = AXIS2_PLACEMENT_3D('',#131799,#131800,#131801); +#131799 = CARTESIAN_POINT('',(8.5,-2.93815,-2.0651)); +#131800 = DIRECTION('',(0.,0.200123335236,-0.979770713327)); +#131801 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#131802 = ADVANCED_FACE('',(#131803),#131821,.T.); +#131803 = FACE_BOUND('',#131804,.T.); +#131804 = EDGE_LOOP('',(#131805,#131806,#131814,#131820)); +#131805 = ORIENTED_EDGE('',*,*,#131791,.T.); +#131806 = ORIENTED_EDGE('',*,*,#131807,.F.); +#131807 = EDGE_CURVE('',#131808,#131784,#131810,.T.); +#131808 = VERTEX_POINT('',#131809); +#131809 = CARTESIAN_POINT('',(8.52,-3.006899993443,-2.0651)); +#131810 = LINE('',#131811,#131812); +#131811 = CARTESIAN_POINT('',(8.52,-3.006899993443,-2.0651)); +#131812 = VECTOR('',#131813,1.); +#131813 = DIRECTION('',(0.,1.,0.)); +#131814 = ORIENTED_EDGE('',*,*,#131815,.F.); +#131815 = EDGE_CURVE('',#130437,#131808,#131816,.T.); +#131816 = LINE('',#131817,#131818); +#131817 = CARTESIAN_POINT('',(8.5,-3.006899993443,-2.0651)); +#131818 = VECTOR('',#131819,1.); +#131819 = DIRECTION('',(1.,0.,0.)); +#131820 = ORIENTED_EDGE('',*,*,#130436,.T.); +#131821 = PLANE('',#131822); +#131822 = AXIS2_PLACEMENT_3D('',#131823,#131824,#131825); +#131823 = CARTESIAN_POINT('',(8.5,-3.006899993443,-2.0651)); +#131824 = DIRECTION('',(0.,0.,-1.)); +#131825 = DIRECTION('',(-1.,0.,0.)); +#131826 = ADVANCED_FACE('',(#131827),#131845,.T.); +#131827 = FACE_BOUND('',#131828,.T.); +#131828 = EDGE_LOOP('',(#131829,#131830,#131838,#131844)); +#131829 = ORIENTED_EDGE('',*,*,#131815,.T.); +#131830 = ORIENTED_EDGE('',*,*,#131831,.F.); +#131831 = EDGE_CURVE('',#131832,#131808,#131834,.T.); +#131832 = VERTEX_POINT('',#131833); +#131833 = CARTESIAN_POINT('',(8.52,-3.075649996722,-2.051057447253)); +#131834 = LINE('',#131835,#131836); +#131835 = CARTESIAN_POINT('',(8.52,-3.075649996722,-2.051057447253)); +#131836 = VECTOR('',#131837,1.); +#131837 = DIRECTION('',(0.,0.979770707714,-0.200123362717)); +#131838 = ORIENTED_EDGE('',*,*,#131839,.F.); +#131839 = EDGE_CURVE('',#130445,#131832,#131840,.T.); +#131840 = LINE('',#131841,#131842); +#131841 = CARTESIAN_POINT('',(8.5,-3.075649996722,-2.051057447253)); +#131842 = VECTOR('',#131843,1.); +#131843 = DIRECTION('',(1.,0.,0.)); +#131844 = ORIENTED_EDGE('',*,*,#130444,.T.); +#131845 = PLANE('',#131846); +#131846 = AXIS2_PLACEMENT_3D('',#131847,#131848,#131849); +#131847 = CARTESIAN_POINT('',(8.5,-3.075649996722,-2.051057447253)); +#131848 = DIRECTION('',(-0.,-0.200123362717,-0.979770707714)); +#131849 = DIRECTION('',(-1.,0.,0.)); +#131850 = ADVANCED_FACE('',(#131851),#131869,.T.); +#131851 = FACE_BOUND('',#131852,.T.); +#131852 = EDGE_LOOP('',(#131853,#131854,#131862,#131868)); +#131853 = ORIENTED_EDGE('',*,*,#131839,.T.); +#131854 = ORIENTED_EDGE('',*,*,#131855,.F.); +#131855 = EDGE_CURVE('',#131856,#131832,#131858,.T.); +#131856 = VERTEX_POINT('',#131857); +#131857 = CARTESIAN_POINT('',(8.52,-3.1444,-2.008929789013)); +#131858 = LINE('',#131859,#131860); +#131859 = CARTESIAN_POINT('',(8.52,-3.1444,-2.008929789013)); +#131860 = VECTOR('',#131861,1.); +#131861 = DIRECTION('',(0.,0.852653413332,-0.522476943733)); +#131862 = ORIENTED_EDGE('',*,*,#131863,.F.); +#131863 = EDGE_CURVE('',#130453,#131856,#131864,.T.); +#131864 = LINE('',#131865,#131866); +#131865 = CARTESIAN_POINT('',(8.5,-3.1444,-2.008929789013)); +#131866 = VECTOR('',#131867,1.); +#131867 = DIRECTION('',(1.,0.,0.)); +#131868 = ORIENTED_EDGE('',*,*,#130452,.T.); +#131869 = PLANE('',#131870); +#131870 = AXIS2_PLACEMENT_3D('',#131871,#131872,#131873); +#131871 = CARTESIAN_POINT('',(8.5,-3.1444,-2.008929789013)); +#131872 = DIRECTION('',(-0.,-0.522476943733,-0.852653413332)); +#131873 = DIRECTION('',(-1.,0.,0.)); +#131874 = ADVANCED_FACE('',(#131875),#131893,.T.); +#131875 = FACE_BOUND('',#131876,.T.); +#131876 = EDGE_LOOP('',(#131877,#131878,#131886,#131892)); +#131877 = ORIENTED_EDGE('',*,*,#131863,.T.); +#131878 = ORIENTED_EDGE('',*,*,#131879,.F.); +#131879 = EDGE_CURVE('',#131880,#131856,#131882,.T.); +#131880 = VERTEX_POINT('',#131881); +#131881 = CARTESIAN_POINT('',(8.52,-3.18565,-1.952759578025)); +#131882 = LINE('',#131883,#131884); +#131883 = CARTESIAN_POINT('',(8.52,-3.18565,-1.952759578025)); +#131884 = VECTOR('',#131885,1.); +#131885 = DIRECTION('',(0.,0.591909515086,-0.806004420553)); +#131886 = ORIENTED_EDGE('',*,*,#131887,.F.); +#131887 = EDGE_CURVE('',#130461,#131880,#131888,.T.); +#131888 = LINE('',#131889,#131890); +#131889 = CARTESIAN_POINT('',(8.5,-3.18565,-1.952759578025)); +#131890 = VECTOR('',#131891,1.); +#131891 = DIRECTION('',(1.,0.,0.)); +#131892 = ORIENTED_EDGE('',*,*,#130460,.T.); +#131893 = PLANE('',#131894); +#131894 = AXIS2_PLACEMENT_3D('',#131895,#131896,#131897); +#131895 = CARTESIAN_POINT('',(8.5,-3.18565,-1.952759578025)); +#131896 = DIRECTION('',(-0.,-0.806004420553,-0.591909515086)); +#131897 = DIRECTION('',(-1.,0.,0.)); +#131898 = ADVANCED_FACE('',(#131899),#131917,.T.); +#131899 = FACE_BOUND('',#131900,.T.); +#131900 = EDGE_LOOP('',(#131901,#131902,#131910,#131916)); +#131901 = ORIENTED_EDGE('',*,*,#131887,.T.); +#131902 = ORIENTED_EDGE('',*,*,#131903,.F.); +#131903 = EDGE_CURVE('',#131904,#131880,#131906,.T.); +#131904 = VERTEX_POINT('',#131905); +#131905 = CARTESIAN_POINT('',(8.52,-3.21314999959,-1.882546810603)); +#131906 = LINE('',#131907,#131908); +#131907 = CARTESIAN_POINT('',(8.52,-3.21314999959,-1.882546810603)); +#131908 = VECTOR('',#131909,1.); +#131909 = DIRECTION('',(0.,0.364691886909,-0.931128255195)); +#131910 = ORIENTED_EDGE('',*,*,#131911,.F.); +#131911 = EDGE_CURVE('',#130469,#131904,#131912,.T.); +#131912 = LINE('',#131913,#131914); +#131913 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.882546810603)); +#131914 = VECTOR('',#131915,1.); +#131915 = DIRECTION('',(1.,0.,0.)); +#131916 = ORIENTED_EDGE('',*,*,#130468,.T.); +#131917 = PLANE('',#131918); +#131918 = AXIS2_PLACEMENT_3D('',#131919,#131920,#131921); +#131919 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.882546810603)); +#131920 = DIRECTION('',(-0.,-0.931128255195,-0.364691886909)); +#131921 = DIRECTION('',(-1.,0.,0.)); +#131922 = ADVANCED_FACE('',(#131923),#131941,.T.); +#131923 = FACE_BOUND('',#131924,.T.); +#131924 = EDGE_LOOP('',(#131925,#131926,#131934,#131940)); +#131925 = ORIENTED_EDGE('',*,*,#131911,.T.); +#131926 = ORIENTED_EDGE('',*,*,#131927,.F.); +#131927 = EDGE_CURVE('',#131928,#131904,#131930,.T.); +#131928 = VERTEX_POINT('',#131929); +#131929 = CARTESIAN_POINT('',(8.52,-3.2269,-1.784248930311)); +#131930 = LINE('',#131931,#131932); +#131931 = CARTESIAN_POINT('',(8.52,-3.2269,-1.784248930311)); +#131932 = VECTOR('',#131933,1.); +#131933 = DIRECTION('',(0.,0.138532203308,-0.990357929562)); +#131934 = ORIENTED_EDGE('',*,*,#131935,.F.); +#131935 = EDGE_CURVE('',#130477,#131928,#131936,.T.); +#131936 = LINE('',#131937,#131938); +#131937 = CARTESIAN_POINT('',(8.5,-3.2269,-1.784248930311)); +#131938 = VECTOR('',#131939,1.); +#131939 = DIRECTION('',(1.,0.,-3.330669073876E-14)); +#131940 = ORIENTED_EDGE('',*,*,#130476,.T.); +#131941 = PLANE('',#131942); +#131942 = AXIS2_PLACEMENT_3D('',#131943,#131944,#131945); +#131943 = CARTESIAN_POINT('',(8.5,-3.2269,-1.784248930311)); +#131944 = DIRECTION('',(-0.,-0.990357929562,-0.138532203308)); +#131945 = DIRECTION('',(-1.,0.,0.)); +#131946 = ADVANCED_FACE('',(#131947),#131965,.T.); +#131947 = FACE_BOUND('',#131948,.T.); +#131948 = EDGE_LOOP('',(#131949,#131950,#131958,#131964)); +#131949 = ORIENTED_EDGE('',*,*,#131935,.T.); +#131950 = ORIENTED_EDGE('',*,*,#131951,.F.); +#131951 = EDGE_CURVE('',#131952,#131928,#131954,.T.); +#131952 = VERTEX_POINT('',#131953); +#131953 = CARTESIAN_POINT('',(8.52,-3.2269,-1.685951069689)); +#131954 = LINE('',#131955,#131956); +#131955 = CARTESIAN_POINT('',(8.52,-3.2269,-1.685951069689)); +#131956 = VECTOR('',#131957,1.); +#131957 = DIRECTION('',(0.,0.,-1.)); +#131958 = ORIENTED_EDGE('',*,*,#131959,.F.); +#131959 = EDGE_CURVE('',#130485,#131952,#131960,.T.); +#131960 = LINE('',#131961,#131962); +#131961 = CARTESIAN_POINT('',(8.5,-3.2269,-1.685951069689)); +#131962 = VECTOR('',#131963,1.); +#131963 = DIRECTION('',(1.,0.,0.)); +#131964 = ORIENTED_EDGE('',*,*,#130484,.T.); +#131965 = PLANE('',#131966); +#131966 = AXIS2_PLACEMENT_3D('',#131967,#131968,#131969); +#131967 = CARTESIAN_POINT('',(8.5,-3.2269,-1.685951069689)); +#131968 = DIRECTION('',(0.,-1.,0.)); +#131969 = DIRECTION('',(1.,0.,0.)); +#131970 = ADVANCED_FACE('',(#131971),#131989,.T.); +#131971 = FACE_BOUND('',#131972,.T.); +#131972 = EDGE_LOOP('',(#131973,#131974,#131982,#131988)); +#131973 = ORIENTED_EDGE('',*,*,#131959,.T.); +#131974 = ORIENTED_EDGE('',*,*,#131975,.F.); +#131975 = EDGE_CURVE('',#131976,#131952,#131978,.T.); +#131976 = VERTEX_POINT('',#131977); +#131977 = CARTESIAN_POINT('',(8.52,-3.21314999959,-1.587653209066)); +#131978 = LINE('',#131979,#131980); +#131979 = CARTESIAN_POINT('',(8.52,-3.21314999959,-1.587653209066)); +#131980 = VECTOR('',#131981,1.); +#131981 = DIRECTION('',(0.,-0.138532230496,-0.990357925759)); +#131982 = ORIENTED_EDGE('',*,*,#131983,.F.); +#131983 = EDGE_CURVE('',#130493,#131976,#131984,.T.); +#131984 = LINE('',#131985,#131986); +#131985 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.587653209066)); +#131986 = VECTOR('',#131987,1.); +#131987 = DIRECTION('',(1.,0.,2.220446049251E-14)); +#131988 = ORIENTED_EDGE('',*,*,#130492,.T.); +#131989 = PLANE('',#131990); +#131990 = AXIS2_PLACEMENT_3D('',#131991,#131992,#131993); +#131991 = CARTESIAN_POINT('',(8.5,-3.21314999959,-1.587653209066)); +#131992 = DIRECTION('',(0.,-0.990357925759,0.138532230496)); +#131993 = DIRECTION('',(-1.,0.,0.)); +#131994 = ADVANCED_FACE('',(#131995),#132013,.T.); +#131995 = FACE_BOUND('',#131996,.T.); +#131996 = EDGE_LOOP('',(#131997,#131998,#132006,#132012)); +#131997 = ORIENTED_EDGE('',*,*,#131983,.T.); +#131998 = ORIENTED_EDGE('',*,*,#131999,.F.); +#131999 = EDGE_CURVE('',#132000,#131976,#132002,.T.); +#132000 = VERTEX_POINT('',#132001); +#132001 = CARTESIAN_POINT('',(8.52,-3.18565,-1.51744041214)); +#132002 = LINE('',#132003,#132004); +#132003 = CARTESIAN_POINT('',(8.52,-3.18565,-1.51744041214)); +#132004 = VECTOR('',#132005,1.); +#132005 = DIRECTION('',(0.,-0.364691754043,-0.931128307234)); +#132006 = ORIENTED_EDGE('',*,*,#132007,.F.); +#132007 = EDGE_CURVE('',#130501,#132000,#132008,.T.); +#132008 = LINE('',#132009,#132010); +#132009 = CARTESIAN_POINT('',(8.5,-3.18565,-1.51744041214)); +#132010 = VECTOR('',#132011,1.); +#132011 = DIRECTION('',(1.,0.,-2.220446049251E-14)); +#132012 = ORIENTED_EDGE('',*,*,#130500,.T.); +#132013 = PLANE('',#132014); +#132014 = AXIS2_PLACEMENT_3D('',#132015,#132016,#132017); +#132015 = CARTESIAN_POINT('',(8.5,-3.18565,-1.51744041214)); +#132016 = DIRECTION('',(0.,-0.931128307234,0.364691754043)); +#132017 = DIRECTION('',(-1.,0.,0.)); +#132018 = ADVANCED_FACE('',(#132019),#132037,.T.); +#132019 = FACE_BOUND('',#132020,.T.); +#132020 = EDGE_LOOP('',(#132021,#132022,#132030,#132036)); +#132021 = ORIENTED_EDGE('',*,*,#132007,.T.); +#132022 = ORIENTED_EDGE('',*,*,#132023,.F.); +#132023 = EDGE_CURVE('',#132024,#132000,#132026,.T.); +#132024 = VERTEX_POINT('',#132025); +#132025 = CARTESIAN_POINT('',(8.52,-3.1444,-1.46127020607)); +#132026 = LINE('',#132027,#132028); +#132027 = CARTESIAN_POINT('',(8.52,-3.1444,-1.46127020607)); +#132028 = VECTOR('',#132029,1.); +#132029 = DIRECTION('',(0.,-0.59190954875,-0.806004395831)); +#132030 = ORIENTED_EDGE('',*,*,#132031,.F.); +#132031 = EDGE_CURVE('',#130509,#132024,#132032,.T.); +#132032 = LINE('',#132033,#132034); +#132033 = CARTESIAN_POINT('',(8.5,-3.1444,-1.46127020607)); +#132034 = VECTOR('',#132035,1.); +#132035 = DIRECTION('',(1.,0.,0.)); +#132036 = ORIENTED_EDGE('',*,*,#130508,.T.); +#132037 = PLANE('',#132038); +#132038 = AXIS2_PLACEMENT_3D('',#132039,#132040,#132041); +#132039 = CARTESIAN_POINT('',(8.5,-3.1444,-1.46127020607)); +#132040 = DIRECTION('',(0.,-0.806004395831,0.59190954875)); +#132041 = DIRECTION('',(-1.,0.,0.)); +#132042 = ADVANCED_FACE('',(#132043),#132061,.T.); +#132043 = FACE_BOUND('',#132044,.T.); +#132044 = EDGE_LOOP('',(#132045,#132046,#132054,#132060)); +#132045 = ORIENTED_EDGE('',*,*,#132031,.T.); +#132046 = ORIENTED_EDGE('',*,*,#132047,.F.); +#132047 = EDGE_CURVE('',#132048,#132024,#132050,.T.); +#132048 = VERTEX_POINT('',#132049); +#132049 = CARTESIAN_POINT('',(8.52,-3.075649996722,-1.419142551517)); +#132050 = LINE('',#132051,#132052); +#132051 = CARTESIAN_POINT('',(8.52,-3.075649996722,-1.419142551517)); +#132052 = VECTOR('',#132053,1.); +#132053 = DIRECTION('',(0.,-0.852653433709,-0.522476910479)); +#132054 = ORIENTED_EDGE('',*,*,#132055,.F.); +#132055 = EDGE_CURVE('',#130517,#132048,#132056,.T.); +#132056 = LINE('',#132057,#132058); +#132057 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.419142551517)); +#132058 = VECTOR('',#132059,1.); +#132059 = DIRECTION('',(1.,0.,0.)); +#132060 = ORIENTED_EDGE('',*,*,#130516,.T.); +#132061 = PLANE('',#132062); +#132062 = AXIS2_PLACEMENT_3D('',#132063,#132064,#132065); +#132063 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.419142551517)); +#132064 = DIRECTION('',(0.,-0.522476910479,0.852653433709)); +#132065 = DIRECTION('',(-1.,0.,0.)); +#132066 = ADVANCED_FACE('',(#132067),#132085,.T.); +#132067 = FACE_BOUND('',#132068,.T.); +#132068 = EDGE_LOOP('',(#132069,#132070,#132078,#132084)); +#132069 = ORIENTED_EDGE('',*,*,#132055,.T.); +#132070 = ORIENTED_EDGE('',*,*,#132071,.F.); +#132071 = EDGE_CURVE('',#132072,#132048,#132074,.T.); +#132072 = VERTEX_POINT('',#132073); +#132073 = CARTESIAN_POINT('',(8.52,-3.006899993443,-1.4051)); +#132074 = LINE('',#132075,#132076); +#132075 = CARTESIAN_POINT('',(8.52,-3.006899993443,-1.4051)); +#132076 = VECTOR('',#132077,1.); +#132077 = DIRECTION('',(0.,-0.979770711149,-0.200123345899)); +#132078 = ORIENTED_EDGE('',*,*,#132079,.F.); +#132079 = EDGE_CURVE('',#130525,#132072,#132080,.T.); +#132080 = LINE('',#132081,#132082); +#132081 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.4051)); +#132082 = VECTOR('',#132083,1.); +#132083 = DIRECTION('',(1.,0.,0.)); +#132084 = ORIENTED_EDGE('',*,*,#130524,.T.); +#132085 = PLANE('',#132086); +#132086 = AXIS2_PLACEMENT_3D('',#132087,#132088,#132089); +#132087 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.4051)); +#132088 = DIRECTION('',(0.,-0.200123345899,0.979770711149)); +#132089 = DIRECTION('',(-1.,0.,0.)); +#132090 = ADVANCED_FACE('',(#132091),#132109,.T.); +#132091 = FACE_BOUND('',#132092,.T.); +#132092 = EDGE_LOOP('',(#132093,#132094,#132102,#132108)); +#132093 = ORIENTED_EDGE('',*,*,#132079,.T.); +#132094 = ORIENTED_EDGE('',*,*,#132095,.F.); +#132095 = EDGE_CURVE('',#132096,#132072,#132098,.T.); +#132096 = VERTEX_POINT('',#132097); +#132097 = CARTESIAN_POINT('',(8.52,-2.951900006557,-1.4051)); +#132098 = LINE('',#132099,#132100); +#132099 = CARTESIAN_POINT('',(8.52,-2.951900006557,-1.4051)); +#132100 = VECTOR('',#132101,1.); +#132101 = DIRECTION('',(0.,-1.,0.)); +#132102 = ORIENTED_EDGE('',*,*,#132103,.F.); +#132103 = EDGE_CURVE('',#130533,#132096,#132104,.T.); +#132104 = LINE('',#132105,#132106); +#132105 = CARTESIAN_POINT('',(8.5,-2.951900006557,-1.4051)); +#132106 = VECTOR('',#132107,1.); +#132107 = DIRECTION('',(1.,0.,0.)); +#132108 = ORIENTED_EDGE('',*,*,#130532,.T.); +#132109 = PLANE('',#132110); +#132110 = AXIS2_PLACEMENT_3D('',#132111,#132112,#132113); +#132111 = CARTESIAN_POINT('',(8.5,-2.951900006557,-1.4051)); +#132112 = DIRECTION('',(0.,0.,1.)); +#132113 = DIRECTION('',(0.,-1.,0.)); +#132114 = ADVANCED_FACE('',(#132115),#132133,.T.); +#132115 = FACE_BOUND('',#132116,.T.); +#132116 = EDGE_LOOP('',(#132117,#132118,#132126,#132132)); +#132117 = ORIENTED_EDGE('',*,*,#132103,.T.); +#132118 = ORIENTED_EDGE('',*,*,#132119,.F.); +#132119 = EDGE_CURVE('',#132120,#132096,#132122,.T.); +#132120 = VERTEX_POINT('',#132121); +#132121 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.419142551517)); +#132122 = LINE('',#132123,#132124); +#132123 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.419142551517)); +#132124 = VECTOR('',#132125,1.); +#132125 = DIRECTION('',(0.,-0.979770705536,0.200123373381)); +#132126 = ORIENTED_EDGE('',*,*,#132127,.F.); +#132127 = EDGE_CURVE('',#130541,#132120,#132128,.T.); +#132128 = LINE('',#132129,#132130); +#132129 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.419142551517)); +#132130 = VECTOR('',#132131,1.); +#132131 = DIRECTION('',(1.,0.,0.)); +#132132 = ORIENTED_EDGE('',*,*,#130540,.T.); +#132133 = PLANE('',#132134); +#132134 = AXIS2_PLACEMENT_3D('',#132135,#132136,#132137); +#132135 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.419142551517)); +#132136 = DIRECTION('',(-0.,0.200123373381,0.979770705536)); +#132137 = DIRECTION('',(1.,0.,0.)); +#132138 = ADVANCED_FACE('',(#132139),#132157,.T.); +#132139 = FACE_BOUND('',#132140,.T.); +#132140 = EDGE_LOOP('',(#132141,#132142,#132150,#132156)); +#132141 = ORIENTED_EDGE('',*,*,#132127,.T.); +#132142 = ORIENTED_EDGE('',*,*,#132143,.F.); +#132143 = EDGE_CURVE('',#132144,#132120,#132146,.T.); +#132144 = VERTEX_POINT('',#132145); +#132145 = CARTESIAN_POINT('',(8.52,-2.8144,-1.46127020607)); +#132146 = LINE('',#132147,#132148); +#132147 = CARTESIAN_POINT('',(8.52,-2.8144,-1.46127020607)); +#132148 = VECTOR('',#132149,1.); +#132149 = DIRECTION('',(0.,-0.852653467006,0.522476856141)); +#132150 = ORIENTED_EDGE('',*,*,#132151,.F.); +#132151 = EDGE_CURVE('',#130549,#132144,#132152,.T.); +#132152 = LINE('',#132153,#132154); +#132153 = CARTESIAN_POINT('',(8.5,-2.8144,-1.46127020607)); +#132154 = VECTOR('',#132155,1.); +#132155 = DIRECTION('',(1.,0.,1.110223024625E-14)); +#132156 = ORIENTED_EDGE('',*,*,#130548,.T.); +#132157 = PLANE('',#132158); +#132158 = AXIS2_PLACEMENT_3D('',#132159,#132160,#132161); +#132159 = CARTESIAN_POINT('',(8.5,-2.8144,-1.46127020607)); +#132160 = DIRECTION('',(-0.,0.522476856141,0.852653467006)); +#132161 = DIRECTION('',(1.,0.,0.)); +#132162 = ADVANCED_FACE('',(#132163),#132181,.T.); +#132163 = FACE_BOUND('',#132164,.T.); +#132164 = EDGE_LOOP('',(#132165,#132166,#132174,#132180)); +#132165 = ORIENTED_EDGE('',*,*,#132151,.T.); +#132166 = ORIENTED_EDGE('',*,*,#132167,.F.); +#132167 = EDGE_CURVE('',#132168,#132144,#132170,.T.); +#132168 = VERTEX_POINT('',#132169); +#132169 = CARTESIAN_POINT('',(8.52,-2.77315,-1.51744041214)); +#132170 = LINE('',#132171,#132172); +#132171 = CARTESIAN_POINT('',(8.52,-2.77315,-1.51744041214)); +#132172 = VECTOR('',#132173,1.); +#132173 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#132174 = ORIENTED_EDGE('',*,*,#132175,.F.); +#132175 = EDGE_CURVE('',#130557,#132168,#132176,.T.); +#132176 = LINE('',#132177,#132178); +#132177 = CARTESIAN_POINT('',(8.5,-2.77315,-1.51744041214)); +#132178 = VECTOR('',#132179,1.); +#132179 = DIRECTION('',(1.,0.,0.)); +#132180 = ORIENTED_EDGE('',*,*,#130556,.T.); +#132181 = PLANE('',#132182); +#132182 = AXIS2_PLACEMENT_3D('',#132183,#132184,#132185); +#132183 = CARTESIAN_POINT('',(8.5,-2.77315,-1.51744041214)); +#132184 = DIRECTION('',(-0.,0.806004395831,0.59190954875)); +#132185 = DIRECTION('',(1.,0.,0.)); +#132186 = ADVANCED_FACE('',(#132187),#132205,.T.); +#132187 = FACE_BOUND('',#132188,.T.); +#132188 = EDGE_LOOP('',(#132189,#132190,#132198,#132204)); +#132189 = ORIENTED_EDGE('',*,*,#132175,.T.); +#132190 = ORIENTED_EDGE('',*,*,#132191,.F.); +#132191 = EDGE_CURVE('',#132192,#132168,#132194,.T.); +#132192 = VERTEX_POINT('',#132193); +#132193 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.559568066692)); +#132194 = LINE('',#132195,#132196); +#132195 = CARTESIAN_POINT('',(8.52,-2.759400013113,-1.559568066692)); +#132196 = VECTOR('',#132197,1.); +#132197 = DIRECTION('',(0.,-0.310279797551,0.950645279393)); +#132198 = ORIENTED_EDGE('',*,*,#132199,.F.); +#132199 = EDGE_CURVE('',#130565,#132192,#132200,.T.); +#132200 = LINE('',#132201,#132202); +#132201 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.559568066692)); +#132202 = VECTOR('',#132203,1.); +#132203 = DIRECTION('',(1.,0.,2.220446049251E-14)); +#132204 = ORIENTED_EDGE('',*,*,#130564,.T.); +#132205 = PLANE('',#132206); +#132206 = AXIS2_PLACEMENT_3D('',#132207,#132208,#132209); +#132207 = CARTESIAN_POINT('',(8.5,-2.759400013113,-1.559568066692)); +#132208 = DIRECTION('',(-0.,0.950645279393,0.310279797551)); +#132209 = DIRECTION('',(1.,0.,0.)); +#132210 = ADVANCED_FACE('',(#132211),#132229,.T.); +#132211 = FACE_BOUND('',#132212,.T.); +#132212 = EDGE_LOOP('',(#132213,#132214,#132222,#132228)); +#132213 = ORIENTED_EDGE('',*,*,#132199,.T.); +#132214 = ORIENTED_EDGE('',*,*,#132215,.F.); +#132215 = EDGE_CURVE('',#132216,#132192,#132218,.T.); +#132216 = VERTEX_POINT('',#132217); +#132217 = CARTESIAN_POINT('',(8.52,-2.828149986887,-1.559568066692)); +#132218 = LINE('',#132219,#132220); +#132219 = CARTESIAN_POINT('',(8.52,-2.828149986887,-1.559568066692)); +#132220 = VECTOR('',#132221,1.); +#132221 = DIRECTION('',(0.,1.,0.)); +#132222 = ORIENTED_EDGE('',*,*,#132223,.F.); +#132223 = EDGE_CURVE('',#130573,#132216,#132224,.T.); +#132224 = LINE('',#132225,#132226); +#132225 = CARTESIAN_POINT('',(8.5,-2.828149986887,-1.559568066692)); +#132226 = VECTOR('',#132227,1.); +#132227 = DIRECTION('',(1.,0.,2.220446049251E-14)); +#132228 = ORIENTED_EDGE('',*,*,#130572,.T.); +#132229 = PLANE('',#132230); +#132230 = AXIS2_PLACEMENT_3D('',#132231,#132232,#132233); +#132231 = CARTESIAN_POINT('',(8.5,-2.828149986887,-1.559568066692)); +#132232 = DIRECTION('',(0.,0.,-1.)); +#132233 = DIRECTION('',(-1.,0.,0.)); +#132234 = ADVANCED_FACE('',(#132235),#132253,.T.); +#132235 = FACE_BOUND('',#132236,.T.); +#132236 = EDGE_LOOP('',(#132237,#132238,#132246,#132252)); +#132237 = ORIENTED_EDGE('',*,*,#132223,.T.); +#132238 = ORIENTED_EDGE('',*,*,#132239,.F.); +#132239 = EDGE_CURVE('',#132240,#132216,#132242,.T.); +#132240 = VERTEX_POINT('',#132241); +#132241 = CARTESIAN_POINT('',(8.52,-2.85565,-1.51744041214)); +#132242 = LINE('',#132243,#132244); +#132243 = CARTESIAN_POINT('',(8.52,-2.85565,-1.51744041214)); +#132244 = VECTOR('',#132245,1.); +#132245 = DIRECTION('',(0.,0.546622729396,-0.837379001234)); +#132246 = ORIENTED_EDGE('',*,*,#132247,.F.); +#132247 = EDGE_CURVE('',#130581,#132240,#132248,.T.); +#132248 = LINE('',#132249,#132250); +#132249 = CARTESIAN_POINT('',(8.5,-2.85565,-1.51744041214)); +#132250 = VECTOR('',#132251,1.); +#132251 = DIRECTION('',(1.,0.,0.)); +#132252 = ORIENTED_EDGE('',*,*,#130580,.T.); +#132253 = PLANE('',#132254); +#132254 = AXIS2_PLACEMENT_3D('',#132255,#132256,#132257); +#132255 = CARTESIAN_POINT('',(8.5,-2.85565,-1.51744041214)); +#132256 = DIRECTION('',(-0.,-0.837379001234,-0.546622729396)); +#132257 = DIRECTION('',(-1.,0.,0.)); +#132258 = ADVANCED_FACE('',(#132259),#132277,.T.); +#132259 = FACE_BOUND('',#132260,.T.); +#132260 = EDGE_LOOP('',(#132261,#132262,#132270,#132276)); +#132261 = ORIENTED_EDGE('',*,*,#132247,.T.); +#132262 = ORIENTED_EDGE('',*,*,#132263,.F.); +#132263 = EDGE_CURVE('',#132264,#132240,#132266,.T.); +#132264 = VERTEX_POINT('',#132265); +#132265 = CARTESIAN_POINT('',(8.52,-2.8969,-1.489355309105)); +#132266 = LINE('',#132267,#132268); +#132267 = CARTESIAN_POINT('',(8.52,-2.8969,-1.489355309105)); +#132268 = VECTOR('',#132269,1.); +#132269 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#132270 = ORIENTED_EDGE('',*,*,#132271,.F.); +#132271 = EDGE_CURVE('',#130589,#132264,#132272,.T.); +#132272 = LINE('',#132273,#132274); +#132273 = CARTESIAN_POINT('',(8.5,-2.8969,-1.489355309105)); +#132274 = VECTOR('',#132275,1.); +#132275 = DIRECTION('',(1.,0.,0.)); +#132276 = ORIENTED_EDGE('',*,*,#130588,.T.); +#132277 = PLANE('',#132278); +#132278 = AXIS2_PLACEMENT_3D('',#132279,#132280,#132281); +#132279 = CARTESIAN_POINT('',(8.5,-2.8969,-1.489355309105)); +#132280 = DIRECTION('',(-0.,-0.562790931242,-0.8265992788)); +#132281 = DIRECTION('',(-1.,0.,0.)); +#132282 = ADVANCED_FACE('',(#132283),#132301,.T.); +#132283 = FACE_BOUND('',#132284,.T.); +#132284 = EDGE_LOOP('',(#132285,#132286,#132294,#132300)); +#132285 = ORIENTED_EDGE('',*,*,#132271,.T.); +#132286 = ORIENTED_EDGE('',*,*,#132287,.F.); +#132287 = EDGE_CURVE('',#132288,#132264,#132290,.T.); +#132288 = VERTEX_POINT('',#132289); +#132289 = CARTESIAN_POINT('',(8.52,-2.93815,-1.475312757587)); +#132290 = LINE('',#132291,#132292); +#132291 = CARTESIAN_POINT('',(8.52,-2.93815,-1.475312757587)); +#132292 = VECTOR('',#132293,1.); +#132293 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#132294 = ORIENTED_EDGE('',*,*,#132295,.F.); +#132295 = EDGE_CURVE('',#130597,#132288,#132296,.T.); +#132296 = LINE('',#132297,#132298); +#132297 = CARTESIAN_POINT('',(8.5,-2.93815,-1.475312757587)); +#132298 = VECTOR('',#132299,1.); +#132299 = DIRECTION('',(1.,0.,0.)); +#132300 = ORIENTED_EDGE('',*,*,#130596,.T.); +#132301 = PLANE('',#132302); +#132302 = AXIS2_PLACEMENT_3D('',#132303,#132304,#132305); +#132303 = CARTESIAN_POINT('',(8.5,-2.93815,-1.475312757587)); +#132304 = DIRECTION('',(-0.,-0.322263763377,-0.94664991777)); +#132305 = DIRECTION('',(-1.,0.,0.)); +#132306 = ADVANCED_FACE('',(#132307),#132325,.T.); +#132307 = FACE_BOUND('',#132308,.T.); +#132308 = EDGE_LOOP('',(#132309,#132310,#132318,#132324)); +#132309 = ORIENTED_EDGE('',*,*,#132295,.T.); +#132310 = ORIENTED_EDGE('',*,*,#132311,.F.); +#132311 = EDGE_CURVE('',#132312,#132288,#132314,.T.); +#132312 = VERTEX_POINT('',#132313); +#132313 = CARTESIAN_POINT('',(8.52,-3.02065,-1.475312757587)); +#132314 = LINE('',#132315,#132316); +#132315 = CARTESIAN_POINT('',(8.52,-3.02065,-1.475312757587)); +#132316 = VECTOR('',#132317,1.); +#132317 = DIRECTION('',(0.,1.,0.)); +#132318 = ORIENTED_EDGE('',*,*,#132319,.F.); +#132319 = EDGE_CURVE('',#130605,#132312,#132320,.T.); +#132320 = LINE('',#132321,#132322); +#132321 = CARTESIAN_POINT('',(8.5,-3.02065,-1.475312757587)); +#132322 = VECTOR('',#132323,1.); +#132323 = DIRECTION('',(1.,0.,0.)); +#132324 = ORIENTED_EDGE('',*,*,#130604,.T.); +#132325 = PLANE('',#132326); +#132326 = AXIS2_PLACEMENT_3D('',#132327,#132328,#132329); +#132327 = CARTESIAN_POINT('',(8.5,-3.02065,-1.475312757587)); +#132328 = DIRECTION('',(0.,0.,-1.)); +#132329 = DIRECTION('',(-1.,0.,0.)); +#132330 = ADVANCED_FACE('',(#132331),#132349,.T.); +#132331 = FACE_BOUND('',#132332,.T.); +#132332 = EDGE_LOOP('',(#132333,#132334,#132342,#132348)); +#132333 = ORIENTED_EDGE('',*,*,#132319,.T.); +#132334 = ORIENTED_EDGE('',*,*,#132335,.F.); +#132335 = EDGE_CURVE('',#132336,#132312,#132338,.T.); +#132336 = VERTEX_POINT('',#132337); +#132337 = CARTESIAN_POINT('',(8.52,-3.0619,-1.489355309105)); +#132338 = LINE('',#132339,#132340); +#132339 = CARTESIAN_POINT('',(8.52,-3.0619,-1.489355309105)); +#132340 = VECTOR('',#132341,1.); +#132341 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#132342 = ORIENTED_EDGE('',*,*,#132343,.F.); +#132343 = EDGE_CURVE('',#130613,#132336,#132344,.T.); +#132344 = LINE('',#132345,#132346); +#132345 = CARTESIAN_POINT('',(8.5,-3.0619,-1.489355309105)); +#132346 = VECTOR('',#132347,1.); +#132347 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#132348 = ORIENTED_EDGE('',*,*,#130612,.T.); +#132349 = PLANE('',#132350); +#132350 = AXIS2_PLACEMENT_3D('',#132351,#132352,#132353); +#132351 = CARTESIAN_POINT('',(8.5,-3.0619,-1.489355309105)); +#132352 = DIRECTION('',(0.,0.322263763377,-0.94664991777)); +#132353 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#132354 = ADVANCED_FACE('',(#132355),#132373,.T.); +#132355 = FACE_BOUND('',#132356,.T.); +#132356 = EDGE_LOOP('',(#132357,#132358,#132366,#132372)); +#132357 = ORIENTED_EDGE('',*,*,#132343,.T.); +#132358 = ORIENTED_EDGE('',*,*,#132359,.F.); +#132359 = EDGE_CURVE('',#132360,#132336,#132362,.T.); +#132360 = VERTEX_POINT('',#132361); +#132361 = CARTESIAN_POINT('',(8.52,-3.10315,-1.51744041214)); +#132362 = LINE('',#132363,#132364); +#132363 = CARTESIAN_POINT('',(8.52,-3.10315,-1.51744041214)); +#132364 = VECTOR('',#132365,1.); +#132365 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#132366 = ORIENTED_EDGE('',*,*,#132367,.F.); +#132367 = EDGE_CURVE('',#130621,#132360,#132368,.T.); +#132368 = LINE('',#132369,#132370); +#132369 = CARTESIAN_POINT('',(8.5,-3.10315,-1.51744041214)); +#132370 = VECTOR('',#132371,1.); +#132371 = DIRECTION('',(1.,0.,0.)); +#132372 = ORIENTED_EDGE('',*,*,#130620,.T.); +#132373 = PLANE('',#132374); +#132374 = AXIS2_PLACEMENT_3D('',#132375,#132376,#132377); +#132375 = CARTESIAN_POINT('',(8.5,-3.10315,-1.51744041214)); +#132376 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#132377 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#132378 = ADVANCED_FACE('',(#132379),#132397,.T.); +#132379 = FACE_BOUND('',#132380,.T.); +#132380 = EDGE_LOOP('',(#132381,#132382,#132390,#132396)); +#132381 = ORIENTED_EDGE('',*,*,#132367,.T.); +#132382 = ORIENTED_EDGE('',*,*,#132383,.F.); +#132383 = EDGE_CURVE('',#132384,#132360,#132386,.T.); +#132384 = VERTEX_POINT('',#132385); +#132385 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.559568066692)); +#132386 = LINE('',#132387,#132388); +#132387 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.559568066692)); +#132388 = VECTOR('',#132389,1.); +#132389 = DIRECTION('',(0.,0.546622592319,0.837379090715)); +#132390 = ORIENTED_EDGE('',*,*,#132391,.F.); +#132391 = EDGE_CURVE('',#130629,#132384,#132392,.T.); +#132392 = LINE('',#132393,#132394); +#132393 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.559568066692)); +#132394 = VECTOR('',#132395,1.); +#132395 = DIRECTION('',(1.,0.,0.)); +#132396 = ORIENTED_EDGE('',*,*,#130628,.T.); +#132397 = PLANE('',#132398); +#132398 = AXIS2_PLACEMENT_3D('',#132399,#132400,#132401); +#132399 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.559568066692)); +#132400 = DIRECTION('',(0.,0.837379090715,-0.546622592319)); +#132401 = DIRECTION('',(0.,0.546622592319,0.837379090715)); +#132402 = ADVANCED_FACE('',(#132403),#132421,.T.); +#132403 = FACE_BOUND('',#132404,.T.); +#132404 = EDGE_LOOP('',(#132405,#132406,#132414,#132420)); +#132405 = ORIENTED_EDGE('',*,*,#132391,.T.); +#132406 = ORIENTED_EDGE('',*,*,#132407,.F.); +#132407 = EDGE_CURVE('',#132408,#132384,#132410,.T.); +#132408 = VERTEX_POINT('',#132409); +#132409 = CARTESIAN_POINT('',(8.52,-3.1444,-1.601695760584)); +#132410 = LINE('',#132411,#132412); +#132411 = CARTESIAN_POINT('',(8.52,-3.1444,-1.601695760584)); +#132412 = VECTOR('',#132413,1.); +#132413 = DIRECTION('',(0.,0.310279736268,0.950645299395)); +#132414 = ORIENTED_EDGE('',*,*,#132415,.F.); +#132415 = EDGE_CURVE('',#130637,#132408,#132416,.T.); +#132416 = LINE('',#132417,#132418); +#132417 = CARTESIAN_POINT('',(8.5,-3.1444,-1.601695760584)); +#132418 = VECTOR('',#132419,1.); +#132419 = DIRECTION('',(1.,0.,0.)); +#132420 = ORIENTED_EDGE('',*,*,#130636,.T.); +#132421 = PLANE('',#132422); +#132422 = AXIS2_PLACEMENT_3D('',#132423,#132424,#132425); +#132423 = CARTESIAN_POINT('',(8.5,-3.1444,-1.601695760584)); +#132424 = DIRECTION('',(0.,0.950645299395,-0.310279736268)); +#132425 = DIRECTION('',(0.,0.310279736268,0.950645299395)); +#132426 = ADVANCED_FACE('',(#132427),#132445,.T.); +#132427 = FACE_BOUND('',#132428,.T.); +#132428 = EDGE_LOOP('',(#132429,#132430,#132438,#132444)); +#132429 = ORIENTED_EDGE('',*,*,#132415,.T.); +#132430 = ORIENTED_EDGE('',*,*,#132431,.F.); +#132431 = EDGE_CURVE('',#132432,#132408,#132434,.T.); +#132432 = VERTEX_POINT('',#132433); +#132433 = CARTESIAN_POINT('',(8.52,-3.158150001639,-1.685951069689)); +#132434 = LINE('',#132435,#132436); +#132435 = CARTESIAN_POINT('',(8.52,-3.158150001639,-1.685951069689)); +#132436 = VECTOR('',#132437,1.); +#132437 = DIRECTION('',(0.,0.16106381521,0.986943994069)); +#132438 = ORIENTED_EDGE('',*,*,#132439,.F.); +#132439 = EDGE_CURVE('',#130645,#132432,#132440,.T.); +#132440 = LINE('',#132441,#132442); +#132441 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.685951069689)); +#132442 = VECTOR('',#132443,1.); +#132443 = DIRECTION('',(1.,0.,0.)); +#132444 = ORIENTED_EDGE('',*,*,#130644,.T.); +#132445 = PLANE('',#132446); +#132446 = AXIS2_PLACEMENT_3D('',#132447,#132448,#132449); +#132447 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.685951069689)); +#132448 = DIRECTION('',(0.,0.986943994069,-0.16106381521)); +#132449 = DIRECTION('',(0.,0.16106381521,0.986943994069)); +#132450 = ADVANCED_FACE('',(#132451),#132469,.T.); +#132451 = FACE_BOUND('',#132452,.T.); +#132452 = EDGE_LOOP('',(#132453,#132454,#132462,#132468)); +#132453 = ORIENTED_EDGE('',*,*,#132439,.T.); +#132454 = ORIENTED_EDGE('',*,*,#132455,.F.); +#132455 = EDGE_CURVE('',#132456,#132432,#132458,.T.); +#132456 = VERTEX_POINT('',#132457); +#132457 = CARTESIAN_POINT('',(8.52,-3.158150001639,-1.714036172724)); +#132458 = LINE('',#132459,#132460); +#132459 = CARTESIAN_POINT('',(8.52,-3.158150001639,-1.714036172724)); +#132460 = VECTOR('',#132461,1.); +#132461 = DIRECTION('',(0.,0.,1.)); +#132462 = ORIENTED_EDGE('',*,*,#132463,.F.); +#132463 = EDGE_CURVE('',#130653,#132456,#132464,.T.); +#132464 = LINE('',#132465,#132466); +#132465 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.714036172724)); +#132466 = VECTOR('',#132467,1.); +#132467 = DIRECTION('',(1.,0.,0.)); +#132468 = ORIENTED_EDGE('',*,*,#130652,.T.); +#132469 = PLANE('',#132470); +#132470 = AXIS2_PLACEMENT_3D('',#132471,#132472,#132473); +#132471 = CARTESIAN_POINT('',(8.5,-3.158150001639,-1.714036172724)); +#132472 = DIRECTION('',(0.,1.,0.)); +#132473 = DIRECTION('',(0.,-0.,1.)); +#132474 = ADVANCED_FACE('',(#132475),#132493,.T.); +#132475 = FACE_BOUND('',#132476,.T.); +#132476 = EDGE_LOOP('',(#132477,#132478,#132486,#132492)); +#132477 = ORIENTED_EDGE('',*,*,#132463,.T.); +#132478 = ORIENTED_EDGE('',*,*,#132479,.F.); +#132479 = EDGE_CURVE('',#132480,#132456,#132482,.T.); +#132480 = VERTEX_POINT('',#132481); +#132481 = CARTESIAN_POINT('',(8.52,-3.075649996722,-1.657865966654)); +#132482 = LINE('',#132483,#132484); +#132483 = CARTESIAN_POINT('',(8.52,-3.075649996722,-1.657865966654)); +#132484 = VECTOR('',#132485,1.); +#132485 = DIRECTION('',(0.,-0.826599294405,-0.562790908322)); +#132486 = ORIENTED_EDGE('',*,*,#132487,.F.); +#132487 = EDGE_CURVE('',#130661,#132480,#132488,.T.); +#132488 = LINE('',#132489,#132490); +#132489 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.657865966654)); +#132490 = VECTOR('',#132491,1.); +#132491 = DIRECTION('',(1.,0.,0.)); +#132492 = ORIENTED_EDGE('',*,*,#130660,.T.); +#132493 = PLANE('',#132494); +#132494 = AXIS2_PLACEMENT_3D('',#132495,#132496,#132497); +#132495 = CARTESIAN_POINT('',(8.5,-3.075649996722,-1.657865966654)); +#132496 = DIRECTION('',(0.,-0.562790908322,0.826599294405)); +#132497 = DIRECTION('',(-1.,0.,0.)); +#132498 = ADVANCED_FACE('',(#132499),#132517,.T.); +#132499 = FACE_BOUND('',#132500,.T.); +#132500 = EDGE_LOOP('',(#132501,#132502,#132510,#132516)); +#132501 = ORIENTED_EDGE('',*,*,#132487,.T.); +#132502 = ORIENTED_EDGE('',*,*,#132503,.F.); +#132503 = EDGE_CURVE('',#132504,#132480,#132506,.T.); +#132504 = VERTEX_POINT('',#132505); +#132505 = CARTESIAN_POINT('',(8.52,-3.006899993443,-1.643823415136)); +#132506 = LINE('',#132507,#132508); +#132507 = CARTESIAN_POINT('',(8.52,-3.006899993443,-1.643823415136)); +#132508 = VECTOR('',#132509,1.); +#132509 = DIRECTION('',(0.,-0.979770711149,-0.200123345899)); +#132510 = ORIENTED_EDGE('',*,*,#132511,.F.); +#132511 = EDGE_CURVE('',#130669,#132504,#132512,.T.); +#132512 = LINE('',#132513,#132514); +#132513 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.643823415136)); +#132514 = VECTOR('',#132515,1.); +#132515 = DIRECTION('',(1.,0.,0.)); +#132516 = ORIENTED_EDGE('',*,*,#130668,.T.); +#132517 = PLANE('',#132518); +#132518 = AXIS2_PLACEMENT_3D('',#132519,#132520,#132521); +#132519 = CARTESIAN_POINT('',(8.5,-3.006899993443,-1.643823415136)); +#132520 = DIRECTION('',(0.,-0.200123345899,0.979770711149)); +#132521 = DIRECTION('',(-1.,0.,0.)); +#132522 = ADVANCED_FACE('',(#132523),#132541,.T.); +#132523 = FACE_BOUND('',#132524,.T.); +#132524 = EDGE_LOOP('',(#132525,#132526,#132534,#132540)); +#132525 = ORIENTED_EDGE('',*,*,#132511,.T.); +#132526 = ORIENTED_EDGE('',*,*,#132527,.F.); +#132527 = EDGE_CURVE('',#132528,#132504,#132530,.T.); +#132528 = VERTEX_POINT('',#132529); +#132529 = CARTESIAN_POINT('',(8.52,-2.93815,-1.643823415136)); +#132530 = LINE('',#132531,#132532); +#132531 = CARTESIAN_POINT('',(8.52,-2.93815,-1.643823415136)); +#132532 = VECTOR('',#132533,1.); +#132533 = DIRECTION('',(0.,-1.,0.)); +#132534 = ORIENTED_EDGE('',*,*,#132535,.F.); +#132535 = EDGE_CURVE('',#130677,#132528,#132536,.T.); +#132536 = LINE('',#132537,#132538); +#132537 = CARTESIAN_POINT('',(8.5,-2.93815,-1.643823415136)); +#132538 = VECTOR('',#132539,1.); +#132539 = DIRECTION('',(1.,0.,0.)); +#132540 = ORIENTED_EDGE('',*,*,#130676,.T.); +#132541 = PLANE('',#132542); +#132542 = AXIS2_PLACEMENT_3D('',#132543,#132544,#132545); +#132543 = CARTESIAN_POINT('',(8.5,-2.93815,-1.643823415136)); +#132544 = DIRECTION('',(0.,0.,1.)); +#132545 = DIRECTION('',(0.,-1.,0.)); +#132546 = ADVANCED_FACE('',(#132547),#132565,.T.); +#132547 = FACE_BOUND('',#132548,.T.); +#132548 = EDGE_LOOP('',(#132549,#132550,#132558,#132564)); +#132549 = ORIENTED_EDGE('',*,*,#132535,.T.); +#132550 = ORIENTED_EDGE('',*,*,#132551,.F.); +#132551 = EDGE_CURVE('',#132552,#132528,#132554,.T.); +#132552 = VERTEX_POINT('',#132553); +#132553 = CARTESIAN_POINT('',(8.52,-2.869399986887,-1.657865966654)); +#132554 = LINE('',#132555,#132556); +#132555 = CARTESIAN_POINT('',(8.52,-2.869399986887,-1.657865966654)); +#132556 = VECTOR('',#132557,1.); +#132557 = DIRECTION('',(0.,-0.979770716763,0.200123318418)); +#132558 = ORIENTED_EDGE('',*,*,#132559,.F.); +#132559 = EDGE_CURVE('',#130685,#132552,#132560,.T.); +#132560 = LINE('',#132561,#132562); +#132561 = CARTESIAN_POINT('',(8.5,-2.869399986887,-1.657865966654)); +#132562 = VECTOR('',#132563,1.); +#132563 = DIRECTION('',(1.,0.,0.)); +#132564 = ORIENTED_EDGE('',*,*,#130684,.T.); +#132565 = PLANE('',#132566); +#132566 = AXIS2_PLACEMENT_3D('',#132567,#132568,#132569); +#132567 = CARTESIAN_POINT('',(8.5,-2.869399986887,-1.657865966654)); +#132568 = DIRECTION('',(-0.,0.200123318418,0.979770716763)); +#132569 = DIRECTION('',(1.,0.,0.)); +#132570 = ADVANCED_FACE('',(#132571),#132582,.T.); +#132571 = FACE_BOUND('',#132572,.T.); +#132572 = EDGE_LOOP('',(#132573,#132574,#132580,#132581)); +#132573 = ORIENTED_EDGE('',*,*,#132559,.T.); +#132574 = ORIENTED_EDGE('',*,*,#132575,.F.); +#132575 = EDGE_CURVE('',#131632,#132552,#132576,.T.); +#132576 = LINE('',#132577,#132578); +#132577 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.699993621206)); +#132578 = VECTOR('',#132579,1.); +#132579 = DIRECTION('',(0.,-0.85265333382,0.522477073493)); +#132580 = ORIENTED_EDGE('',*,*,#131631,.F.); +#132581 = ORIENTED_EDGE('',*,*,#130692,.T.); +#132582 = PLANE('',#132583); +#132583 = AXIS2_PLACEMENT_3D('',#132584,#132585,#132586); +#132584 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.699993621206)); +#132585 = DIRECTION('',(-0.,0.522477073493,0.85265333382)); +#132586 = DIRECTION('',(1.,0.,0.)); +#132587 = ADVANCED_FACE('',(#132588,#132630),#132792,.T.); +#132588 = FACE_BOUND('',#132589,.T.); +#132589 = EDGE_LOOP('',(#132590,#132591,#132592,#132593,#132594,#132595, + #132596,#132597,#132598,#132599,#132600,#132601,#132602,#132603, + #132604,#132605,#132606,#132607,#132608,#132609,#132610,#132611, + #132612,#132613,#132614,#132615,#132616,#132617,#132618,#132619, + #132620,#132621,#132622,#132623,#132624,#132625,#132626,#132627, + #132628,#132629)); +#132590 = ORIENTED_EDGE('',*,*,#132575,.T.); +#132591 = ORIENTED_EDGE('',*,*,#132551,.T.); +#132592 = ORIENTED_EDGE('',*,*,#132527,.T.); +#132593 = ORIENTED_EDGE('',*,*,#132503,.T.); +#132594 = ORIENTED_EDGE('',*,*,#132479,.T.); +#132595 = ORIENTED_EDGE('',*,*,#132455,.T.); +#132596 = ORIENTED_EDGE('',*,*,#132431,.T.); +#132597 = ORIENTED_EDGE('',*,*,#132407,.T.); +#132598 = ORIENTED_EDGE('',*,*,#132383,.T.); +#132599 = ORIENTED_EDGE('',*,*,#132359,.T.); +#132600 = ORIENTED_EDGE('',*,*,#132335,.T.); +#132601 = ORIENTED_EDGE('',*,*,#132311,.T.); +#132602 = ORIENTED_EDGE('',*,*,#132287,.T.); +#132603 = ORIENTED_EDGE('',*,*,#132263,.T.); +#132604 = ORIENTED_EDGE('',*,*,#132239,.T.); +#132605 = ORIENTED_EDGE('',*,*,#132215,.T.); +#132606 = ORIENTED_EDGE('',*,*,#132191,.T.); +#132607 = ORIENTED_EDGE('',*,*,#132167,.T.); +#132608 = ORIENTED_EDGE('',*,*,#132143,.T.); +#132609 = ORIENTED_EDGE('',*,*,#132119,.T.); +#132610 = ORIENTED_EDGE('',*,*,#132095,.T.); +#132611 = ORIENTED_EDGE('',*,*,#132071,.T.); +#132612 = ORIENTED_EDGE('',*,*,#132047,.T.); +#132613 = ORIENTED_EDGE('',*,*,#132023,.T.); +#132614 = ORIENTED_EDGE('',*,*,#131999,.T.); +#132615 = ORIENTED_EDGE('',*,*,#131975,.T.); +#132616 = ORIENTED_EDGE('',*,*,#131951,.T.); +#132617 = ORIENTED_EDGE('',*,*,#131927,.T.); +#132618 = ORIENTED_EDGE('',*,*,#131903,.T.); +#132619 = ORIENTED_EDGE('',*,*,#131879,.T.); +#132620 = ORIENTED_EDGE('',*,*,#131855,.T.); +#132621 = ORIENTED_EDGE('',*,*,#131831,.T.); +#132622 = ORIENTED_EDGE('',*,*,#131807,.T.); +#132623 = ORIENTED_EDGE('',*,*,#131783,.T.); +#132624 = ORIENTED_EDGE('',*,*,#131759,.T.); +#132625 = ORIENTED_EDGE('',*,*,#131735,.T.); +#132626 = ORIENTED_EDGE('',*,*,#131711,.T.); +#132627 = ORIENTED_EDGE('',*,*,#131687,.T.); +#132628 = ORIENTED_EDGE('',*,*,#131663,.T.); +#132629 = ORIENTED_EDGE('',*,*,#131639,.T.); +#132630 = FACE_BOUND('',#132631,.T.); +#132631 = EDGE_LOOP('',(#132632,#132642,#132650,#132658,#132666,#132674, + #132682,#132690,#132698,#132706,#132714,#132722,#132730,#132738, + #132746,#132754,#132762,#132770,#132778,#132786)); +#132632 = ORIENTED_EDGE('',*,*,#132633,.T.); +#132633 = EDGE_CURVE('',#132634,#132636,#132638,.T.); +#132634 = VERTEX_POINT('',#132635); +#132635 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.826376604533)); +#132636 = VERTEX_POINT('',#132637); +#132637 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.868504259086)); +#132638 = LINE('',#132639,#132640); +#132639 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.826376604533)); +#132640 = VECTOR('',#132641,1.); +#132641 = DIRECTION('',(0.,0.,-1.)); +#132642 = ORIENTED_EDGE('',*,*,#132643,.T.); +#132643 = EDGE_CURVE('',#132636,#132644,#132646,.T.); +#132644 = VERTEX_POINT('',#132645); +#132645 = CARTESIAN_POINT('',(8.52,-2.8144,-1.910631913638)); +#132646 = LINE('',#132647,#132648); +#132647 = CARTESIAN_POINT('',(8.52,-2.800650013113,-1.868504259086)); +#132648 = VECTOR('',#132649,1.); +#132649 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#132650 = ORIENTED_EDGE('',*,*,#132651,.T.); +#132651 = EDGE_CURVE('',#132644,#132652,#132654,.T.); +#132652 = VERTEX_POINT('',#132653); +#132653 = CARTESIAN_POINT('',(8.52,-2.841900013113,-1.952759578025)); +#132654 = LINE('',#132655,#132656); +#132655 = CARTESIAN_POINT('',(8.52,-2.8144,-1.910631913638)); +#132656 = VECTOR('',#132657,1.); +#132657 = DIRECTION('',(0.,-0.546622639915,-0.837379059645)); +#132658 = ORIENTED_EDGE('',*,*,#132659,.T.); +#132659 = EDGE_CURVE('',#132652,#132660,#132662,.T.); +#132660 = VERTEX_POINT('',#132661); +#132661 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.98084468106)); +#132662 = LINE('',#132663,#132664); +#132663 = CARTESIAN_POINT('',(8.52,-2.841900013113,-1.952759578025)); +#132664 = VECTOR('',#132665,1.); +#132665 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#132666 = ORIENTED_EDGE('',*,*,#132667,.T.); +#132667 = EDGE_CURVE('',#132660,#132668,#132670,.T.); +#132668 = VERTEX_POINT('',#132669); +#132669 = CARTESIAN_POINT('',(8.52,-2.924399993443,-1.994887232578)); +#132670 = LINE('',#132671,#132672); +#132671 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.98084468106)); +#132672 = VECTOR('',#132673,1.); +#132673 = DIRECTION('',(0.,-0.946649870891,-0.322263901086)); +#132674 = ORIENTED_EDGE('',*,*,#132675,.T.); +#132675 = EDGE_CURVE('',#132668,#132676,#132678,.T.); +#132676 = VERTEX_POINT('',#132677); +#132677 = CARTESIAN_POINT('',(8.52,-3.02065,-1.994887232578)); +#132678 = LINE('',#132679,#132680); +#132679 = CARTESIAN_POINT('',(8.52,-2.924399993443,-1.994887232578)); +#132680 = VECTOR('',#132681,1.); +#132681 = DIRECTION('',(0.,-1.,0.)); +#132682 = ORIENTED_EDGE('',*,*,#132683,.T.); +#132683 = EDGE_CURVE('',#132676,#132684,#132686,.T.); +#132684 = VERTEX_POINT('',#132685); +#132685 = CARTESIAN_POINT('',(8.52,-3.0619,-1.98084468106)); +#132686 = LINE('',#132687,#132688); +#132687 = CARTESIAN_POINT('',(8.52,-3.02065,-1.994887232578)); +#132688 = VECTOR('',#132689,1.); +#132689 = DIRECTION('',(0.,-0.94664991777,0.322263763377)); +#132690 = ORIENTED_EDGE('',*,*,#132691,.T.); +#132691 = EDGE_CURVE('',#132684,#132692,#132694,.T.); +#132692 = VERTEX_POINT('',#132693); +#132693 = CARTESIAN_POINT('',(8.52,-3.10315,-1.952759578025)); +#132694 = LINE('',#132695,#132696); +#132695 = CARTESIAN_POINT('',(8.52,-3.0619,-1.98084468106)); +#132696 = VECTOR('',#132697,1.); +#132697 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#132698 = ORIENTED_EDGE('',*,*,#132699,.T.); +#132699 = EDGE_CURVE('',#132692,#132700,#132702,.T.); +#132700 = VERTEX_POINT('',#132701); +#132701 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.910631913638)); +#132702 = LINE('',#132703,#132704); +#132703 = CARTESIAN_POINT('',(8.52,-3.10315,-1.952759578025)); +#132704 = VECTOR('',#132705,1.); +#132705 = DIRECTION('',(0.,-0.546622502839,0.837379149126)); +#132706 = ORIENTED_EDGE('',*,*,#132707,.T.); +#132707 = EDGE_CURVE('',#132700,#132708,#132710,.T.); +#132708 = VERTEX_POINT('',#132709); +#132709 = CARTESIAN_POINT('',(8.52,-3.1444,-1.868504259086)); +#132710 = LINE('',#132711,#132712); +#132711 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.910631913638)); +#132712 = VECTOR('',#132713,1.); +#132713 = DIRECTION('',(0.,-0.310279998114,0.950645213931)); +#132714 = ORIENTED_EDGE('',*,*,#132715,.T.); +#132715 = EDGE_CURVE('',#132708,#132716,#132718,.T.); +#132716 = VERTEX_POINT('',#132717); +#132717 = CARTESIAN_POINT('',(8.52,-3.1444,-1.826376604533)); +#132718 = LINE('',#132719,#132720); +#132719 = CARTESIAN_POINT('',(8.52,-3.1444,-1.868504259086)); +#132720 = VECTOR('',#132721,1.); +#132721 = DIRECTION('',(0.,0.,1.)); +#132722 = ORIENTED_EDGE('',*,*,#132723,.T.); +#132723 = EDGE_CURVE('',#132716,#132724,#132726,.T.); +#132724 = VERTEX_POINT('',#132725); +#132725 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.784248930311)); +#132726 = LINE('',#132727,#132728); +#132727 = CARTESIAN_POINT('',(8.52,-3.1444,-1.826376604533)); +#132728 = VECTOR('',#132729,1.); +#132729 = DIRECTION('',(0.,0.310279867191,0.950645256663)); +#132730 = ORIENTED_EDGE('',*,*,#132731,.T.); +#132731 = EDGE_CURVE('',#132724,#132732,#132734,.T.); +#132732 = VERTEX_POINT('',#132733); +#132733 = CARTESIAN_POINT('',(8.52,-3.10315,-1.756163827276)); +#132734 = LINE('',#132735,#132736); +#132735 = CARTESIAN_POINT('',(8.52,-3.130650003278,-1.784248930311)); +#132736 = VECTOR('',#132737,1.); +#132737 = DIRECTION('',(0.,0.699624877766,0.71451034311)); +#132738 = ORIENTED_EDGE('',*,*,#132739,.T.); +#132739 = EDGE_CURVE('',#132732,#132740,#132742,.T.); +#132740 = VERTEX_POINT('',#132741); +#132741 = CARTESIAN_POINT('',(8.52,-3.0619,-1.728078724241)); +#132742 = LINE('',#132743,#132744); +#132743 = CARTESIAN_POINT('',(8.52,-3.10315,-1.756163827276)); +#132744 = VECTOR('',#132745,1.); +#132745 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#132746 = ORIENTED_EDGE('',*,*,#132747,.T.); +#132747 = EDGE_CURVE('',#132740,#132748,#132750,.T.); +#132748 = VERTEX_POINT('',#132749); +#132749 = CARTESIAN_POINT('',(8.52,-3.02065,-1.714036172724)); +#132750 = LINE('',#132751,#132752); +#132751 = CARTESIAN_POINT('',(8.52,-3.0619,-1.728078724241)); +#132752 = VECTOR('',#132753,1.); +#132753 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#132754 = ORIENTED_EDGE('',*,*,#132755,.T.); +#132755 = EDGE_CURVE('',#132748,#132756,#132758,.T.); +#132756 = VERTEX_POINT('',#132757); +#132757 = CARTESIAN_POINT('',(8.52,-2.924399993443,-1.714036172724)); +#132758 = LINE('',#132759,#132760); +#132759 = CARTESIAN_POINT('',(8.52,-3.02065,-1.714036172724)); +#132760 = VECTOR('',#132761,1.); +#132761 = DIRECTION('',(0.,1.,0.)); +#132762 = ORIENTED_EDGE('',*,*,#132763,.T.); +#132763 = EDGE_CURVE('',#132756,#132764,#132766,.T.); +#132764 = VERTEX_POINT('',#132765); +#132765 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.728078724241)); +#132766 = LINE('',#132767,#132768); +#132767 = CARTESIAN_POINT('',(8.52,-2.924399993443,-1.714036172724)); +#132768 = VECTOR('',#132769,1.); +#132769 = DIRECTION('',(0.,0.946649870891,-0.322263901086)); +#132770 = ORIENTED_EDGE('',*,*,#132771,.T.); +#132771 = EDGE_CURVE('',#132764,#132772,#132774,.T.); +#132772 = VERTEX_POINT('',#132773); +#132773 = CARTESIAN_POINT('',(8.52,-2.841900013113,-1.756163827276)); +#132774 = LINE('',#132775,#132776); +#132775 = CARTESIAN_POINT('',(8.52,-2.883150013113,-1.728078724241)); +#132776 = VECTOR('',#132777,1.); +#132777 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#132778 = ORIENTED_EDGE('',*,*,#132779,.T.); +#132779 = EDGE_CURVE('',#132772,#132780,#132782,.T.); +#132780 = VERTEX_POINT('',#132781); +#132781 = CARTESIAN_POINT('',(8.52,-2.8144,-1.784248930311)); +#132782 = LINE('',#132783,#132784); +#132783 = CARTESIAN_POINT('',(8.52,-2.841900013113,-1.756163827276)); +#132784 = VECTOR('',#132785,1.); +#132785 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#132786 = ORIENTED_EDGE('',*,*,#132787,.T.); +#132787 = EDGE_CURVE('',#132780,#132634,#132788,.T.); +#132788 = LINE('',#132789,#132790); +#132789 = CARTESIAN_POINT('',(8.52,-2.8144,-1.784248930311)); +#132790 = VECTOR('',#132791,1.); +#132791 = DIRECTION('',(0.,0.310279666627,-0.950645322125)); +#132792 = PLANE('',#132793); +#132793 = AXIS2_PLACEMENT_3D('',#132794,#132795,#132796); +#132794 = CARTESIAN_POINT('',(8.52,4.75,0.)); +#132795 = DIRECTION('',(1.,0.,0.)); +#132796 = DIRECTION('',(0.,-1.,0.)); +#132797 = ADVANCED_FACE('',(#132798,#133008),#133154,.T.); +#132798 = FACE_BOUND('',#132799,.T.); +#132799 = EDGE_LOOP('',(#132800,#132810,#132818,#132826,#132834,#132842, + #132850,#132858,#132866,#132874,#132882,#132890,#132898,#132906, + #132914,#132922,#132930,#132938,#132946,#132954,#132962,#132970, + #132978,#132986,#132994,#133002)); +#132800 = ORIENTED_EDGE('',*,*,#132801,.T.); +#132801 = EDGE_CURVE('',#132802,#132804,#132806,.T.); +#132802 = VERTEX_POINT('',#132803); +#132803 = CARTESIAN_POINT('',(8.52,-2.621899986887,-1.798291481829)); +#132804 = VERTEX_POINT('',#132805); +#132805 = CARTESIAN_POINT('',(8.52,-2.60815,-1.868504259086)); +#132806 = LINE('',#132807,#132808); +#132807 = CARTESIAN_POINT('',(8.52,-2.621899986887,-1.798291481829)); +#132808 = VECTOR('',#132809,1.); +#132809 = DIRECTION('',(0.,0.192182625054,-0.981359179214)); +#132810 = ORIENTED_EDGE('',*,*,#132811,.T.); +#132811 = EDGE_CURVE('',#132804,#132812,#132814,.T.); +#132812 = VERTEX_POINT('',#132813); +#132813 = CARTESIAN_POINT('',(8.52,-2.594400013113,-1.910631913638)); +#132814 = LINE('',#132815,#132816); +#132815 = CARTESIAN_POINT('',(8.52,-2.60815,-1.868504259086)); +#132816 = VECTOR('',#132817,1.); +#132817 = DIRECTION('',(0.,0.310279797551,-0.950645279393)); +#132818 = ORIENTED_EDGE('',*,*,#132819,.T.); +#132819 = EDGE_CURVE('',#132812,#132820,#132822,.T.); +#132820 = VERTEX_POINT('',#132821); +#132821 = CARTESIAN_POINT('',(8.52,-2.5669,-1.966802129543)); +#132822 = LINE('',#132823,#132824); +#132823 = CARTESIAN_POINT('',(8.52,-2.594400013113,-1.910631913638)); +#132824 = VECTOR('',#132825,1.); +#132825 = DIRECTION('',(0.,0.439713602853,-0.898138044771)); +#132826 = ORIENTED_EDGE('',*,*,#132827,.T.); +#132827 = EDGE_CURVE('',#132820,#132828,#132830,.T.); +#132828 = VERTEX_POINT('',#132829); +#132829 = CARTESIAN_POINT('',(8.52,-2.52565,-2.008929789013)); +#132830 = LINE('',#132831,#132832); +#132831 = CARTESIAN_POINT('',(8.52,-2.5669,-1.966802129543)); +#132832 = VECTOR('',#132833,1.); +#132833 = DIRECTION('',(0.,0.699624793495,-0.714510425625)); +#132834 = ORIENTED_EDGE('',*,*,#132835,.T.); +#132835 = EDGE_CURVE('',#132828,#132836,#132838,.T.); +#132836 = VERTEX_POINT('',#132837); +#132837 = CARTESIAN_POINT('',(8.52,-2.456900026226,-2.051057447253)); +#132838 = LINE('',#132839,#132840); +#132839 = CARTESIAN_POINT('',(8.52,-2.52565,-2.008929789013)); +#132840 = VECTOR('',#132841,1.); +#132841 = DIRECTION('',(0.,0.852653313443,-0.522477106747)); +#132842 = ORIENTED_EDGE('',*,*,#132843,.T.); +#132843 = EDGE_CURVE('',#132836,#132844,#132846,.T.); +#132844 = VERTEX_POINT('',#132845); +#132845 = CARTESIAN_POINT('',(8.52,-2.374400026226,-2.0651)); +#132846 = LINE('',#132847,#132848); +#132847 = CARTESIAN_POINT('',(8.52,-2.456900026226,-2.051057447253)); +#132848 = VECTOR('',#132849,1.); +#132849 = DIRECTION('',(0.,0.985821170663,-0.167799342885)); +#132850 = ORIENTED_EDGE('',*,*,#132851,.T.); +#132851 = EDGE_CURVE('',#132844,#132852,#132854,.T.); +#132852 = VERTEX_POINT('',#132853); +#132853 = CARTESIAN_POINT('',(8.52,-2.291900026226,-2.051057447253)); +#132854 = LINE('',#132855,#132856); +#132855 = CARTESIAN_POINT('',(8.52,-2.374400026226,-2.0651)); +#132856 = VECTOR('',#132857,1.); +#132857 = DIRECTION('',(0.,0.985821170663,0.167799342885)); +#132858 = ORIENTED_EDGE('',*,*,#132859,.T.); +#132859 = EDGE_CURVE('',#132852,#132860,#132862,.T.); +#132860 = VERTEX_POINT('',#132861); +#132861 = CARTESIAN_POINT('',(8.52,-2.223149973774,-2.008929789013)); +#132862 = LINE('',#132863,#132864); +#132863 = CARTESIAN_POINT('',(8.52,-2.291900026226,-2.051057447253)); +#132864 = VECTOR('',#132865,1.); +#132865 = DIRECTION('',(0.,0.852653579815,0.522476672043)); +#132866 = ORIENTED_EDGE('',*,*,#132867,.T.); +#132867 = EDGE_CURVE('',#132860,#132868,#132870,.T.); +#132868 = VERTEX_POINT('',#132869); +#132869 = CARTESIAN_POINT('',(8.52,-2.181899973774,-1.966802129543)); +#132870 = LINE('',#132871,#132872); +#132871 = CARTESIAN_POINT('',(8.52,-2.223149973774,-2.008929789013)); +#132872 = VECTOR('',#132873,1.); +#132873 = DIRECTION('',(0.,0.699624793495,0.714510425625)); +#132874 = ORIENTED_EDGE('',*,*,#132875,.T.); +#132875 = EDGE_CURVE('',#132868,#132876,#132878,.T.); +#132876 = VERTEX_POINT('',#132877); +#132877 = CARTESIAN_POINT('',(8.52,-2.1544,-1.910631913638)); +#132878 = LINE('',#132879,#132880); +#132879 = CARTESIAN_POINT('',(8.52,-2.181899973774,-1.966802129543)); +#132880 = VECTOR('',#132881,1.); +#132881 = DIRECTION('',(0.,0.439713095457,0.898138293184)); +#132882 = ORIENTED_EDGE('',*,*,#132883,.T.); +#132883 = EDGE_CURVE('',#132876,#132884,#132886,.T.); +#132884 = VERTEX_POINT('',#132885); +#132885 = CARTESIAN_POINT('',(8.52,-2.140649973774,-1.868504259086)); +#132886 = LINE('',#132887,#132888); +#132887 = CARTESIAN_POINT('',(8.52,-2.1544,-1.910631913638)); +#132888 = VECTOR('',#132889,1.); +#132889 = DIRECTION('',(0.,0.310280599805,0.950645017546)); +#132890 = ORIENTED_EDGE('',*,*,#132891,.T.); +#132891 = EDGE_CURVE('',#132884,#132892,#132894,.T.); +#132892 = VERTEX_POINT('',#132893); +#132893 = CARTESIAN_POINT('',(8.52,-2.126900026226,-1.798291481829)); +#132894 = LINE('',#132895,#132896); +#132895 = CARTESIAN_POINT('',(8.52,-2.140649973774,-1.868504259086)); +#132896 = VECTOR('',#132897,1.); +#132897 = DIRECTION('',(0.,0.192182095523,0.981359282913)); +#132898 = ORIENTED_EDGE('',*,*,#132899,.T.); +#132899 = EDGE_CURVE('',#132892,#132900,#132902,.T.); +#132900 = VERTEX_POINT('',#132901); +#132901 = CARTESIAN_POINT('',(8.52,-2.126900026226,-1.671908518171)); +#132902 = LINE('',#132903,#132904); +#132903 = CARTESIAN_POINT('',(8.52,-2.126900026226,-1.798291481829)); +#132904 = VECTOR('',#132905,1.); +#132905 = DIRECTION('',(0.,0.,1.)); +#132906 = ORIENTED_EDGE('',*,*,#132907,.T.); +#132907 = EDGE_CURVE('',#132900,#132908,#132910,.T.); +#132908 = VERTEX_POINT('',#132909); +#132909 = CARTESIAN_POINT('',(8.52,-2.140649973774,-1.601695760584)); +#132910 = LINE('',#132911,#132912); +#132911 = CARTESIAN_POINT('',(8.52,-2.126900026226,-1.671908518171)); +#132912 = VECTOR('',#132913,1.); +#132913 = DIRECTION('',(0.,-0.192182147373,0.98135927276)); +#132914 = ORIENTED_EDGE('',*,*,#132915,.T.); +#132915 = EDGE_CURVE('',#132908,#132916,#132918,.T.); +#132916 = VERTEX_POINT('',#132917); +#132917 = CARTESIAN_POINT('',(8.52,-2.1544,-1.559568066692)); +#132918 = LINE('',#132919,#132920); +#132919 = CARTESIAN_POINT('',(8.52,-2.140649973774,-1.601695760584)); +#132920 = VECTOR('',#132921,1.); +#132921 = DIRECTION('',(0.,-0.310280337958,0.95064510301)); +#132922 = ORIENTED_EDGE('',*,*,#132923,.T.); +#132923 = EDGE_CURVE('',#132916,#132924,#132926,.T.); +#132924 = VERTEX_POINT('',#132925); +#132925 = CARTESIAN_POINT('',(8.52,-2.181899973774,-1.503397860622)); +#132926 = LINE('',#132927,#132928); +#132927 = CARTESIAN_POINT('',(8.52,-2.1544,-1.559568066692)); +#132928 = VECTOR('',#132929,1.); +#132929 = DIRECTION('',(0.,-0.43971315756,0.898138262779)); +#132930 = ORIENTED_EDGE('',*,*,#132931,.T.); +#132931 = EDGE_CURVE('',#132924,#132932,#132934,.T.); +#132932 = VERTEX_POINT('',#132933); +#132933 = CARTESIAN_POINT('',(8.52,-2.223149973774,-1.46127020607)); +#132934 = LINE('',#132935,#132936); +#132935 = CARTESIAN_POINT('',(8.52,-2.181899973774,-1.503397860622)); +#132936 = VECTOR('',#132937,1.); +#132937 = DIRECTION('',(0.,-0.699624835187,0.714510384802)); +#132938 = ORIENTED_EDGE('',*,*,#132939,.T.); +#132939 = EDGE_CURVE('',#132932,#132940,#132942,.T.); +#132940 = VERTEX_POINT('',#132941); +#132941 = CARTESIAN_POINT('',(8.52,-2.291900026226,-1.419142551517)); +#132942 = LINE('',#132943,#132944); +#132943 = CARTESIAN_POINT('',(8.52,-2.223149973774,-1.46127020607)); +#132944 = VECTOR('',#132945,1.); +#132945 = DIRECTION('',(0.,-0.852653600191,0.52247663879)); +#132946 = ORIENTED_EDGE('',*,*,#132947,.T.); +#132947 = EDGE_CURVE('',#132940,#132948,#132950,.T.); +#132948 = VERTEX_POINT('',#132949); +#132949 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.4051)); +#132950 = LINE('',#132951,#132952); +#132951 = CARTESIAN_POINT('',(8.52,-2.291900026226,-1.419142551517)); +#132952 = VECTOR('',#132953,1.); +#132953 = DIRECTION('',(0.,-0.985821173093,0.167799328608)); +#132954 = ORIENTED_EDGE('',*,*,#132955,.T.); +#132955 = EDGE_CURVE('',#132948,#132956,#132958,.T.); +#132956 = VERTEX_POINT('',#132957); +#132957 = CARTESIAN_POINT('',(8.52,-2.456900026226,-1.419142551517)); +#132958 = LINE('',#132959,#132960); +#132959 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.4051)); +#132960 = VECTOR('',#132961,1.); +#132961 = DIRECTION('',(0.,-0.985821173093,-0.167799328608)); +#132962 = ORIENTED_EDGE('',*,*,#132963,.T.); +#132963 = EDGE_CURVE('',#132956,#132964,#132966,.T.); +#132964 = VERTEX_POINT('',#132965); +#132965 = CARTESIAN_POINT('',(8.52,-2.52565,-1.46127020607)); +#132966 = LINE('',#132967,#132968); +#132967 = CARTESIAN_POINT('',(8.52,-2.456900026226,-1.419142551517)); +#132968 = VECTOR('',#132969,1.); +#132969 = DIRECTION('',(0.,-0.85265333382,-0.522477073493)); +#132970 = ORIENTED_EDGE('',*,*,#132971,.T.); +#132971 = EDGE_CURVE('',#132964,#132972,#132974,.T.); +#132972 = VERTEX_POINT('',#132973); +#132973 = CARTESIAN_POINT('',(8.52,-2.5669,-1.503397860622)); +#132974 = LINE('',#132975,#132976); +#132975 = CARTESIAN_POINT('',(8.52,-2.52565,-1.46127020607)); +#132976 = VECTOR('',#132977,1.); +#132977 = DIRECTION('',(0.,-0.699624835187,-0.714510384802)); +#132978 = ORIENTED_EDGE('',*,*,#132979,.T.); +#132979 = EDGE_CURVE('',#132972,#132980,#132982,.T.); +#132980 = VERTEX_POINT('',#132981); +#132981 = CARTESIAN_POINT('',(8.52,-2.594400013113,-1.559568066692)); +#132982 = LINE('',#132983,#132984); +#132983 = CARTESIAN_POINT('',(8.52,-2.5669,-1.503397860622)); +#132984 = VECTOR('',#132985,1.); +#132985 = DIRECTION('',(0.,-0.439713664957,-0.898138014367)); +#132986 = ORIENTED_EDGE('',*,*,#132987,.T.); +#132987 = EDGE_CURVE('',#132980,#132988,#132990,.T.); +#132988 = VERTEX_POINT('',#132989); +#132989 = CARTESIAN_POINT('',(8.52,-2.60815,-1.601695760584)); +#132990 = LINE('',#132991,#132992); +#132991 = CARTESIAN_POINT('',(8.52,-2.594400013113,-1.559568066692)); +#132992 = VECTOR('',#132993,1.); +#132993 = DIRECTION('',(0.,-0.310279535704,-0.950645364857)); +#132994 = ORIENTED_EDGE('',*,*,#132995,.T.); +#132995 = EDGE_CURVE('',#132988,#132996,#132998,.T.); +#132996 = VERTEX_POINT('',#132997); +#132997 = CARTESIAN_POINT('',(8.52,-2.621899986887,-1.671908518171)); +#132998 = LINE('',#132999,#133000); +#132999 = CARTESIAN_POINT('',(8.52,-2.60815,-1.601695760584)); +#133000 = VECTOR('',#133001,1.); +#133001 = DIRECTION('',(0.,-0.192182676904,-0.98135916906)); +#133002 = ORIENTED_EDGE('',*,*,#133003,.T.); +#133003 = EDGE_CURVE('',#132996,#132802,#133004,.T.); +#133004 = LINE('',#133005,#133006); +#133005 = CARTESIAN_POINT('',(8.52,-2.621899986887,-1.671908518171)); +#133006 = VECTOR('',#133007,1.); +#133007 = DIRECTION('',(0.,0.,-1.)); +#133008 = FACE_BOUND('',#133009,.T.); +#133009 = EDGE_LOOP('',(#133010,#133020,#133028,#133036,#133044,#133052, + #133060,#133068,#133076,#133084,#133092,#133100,#133108,#133116, + #133124,#133132,#133140,#133148)); +#133010 = ORIENTED_EDGE('',*,*,#133011,.T.); +#133011 = EDGE_CURVE('',#133012,#133014,#133016,.T.); +#133012 = VERTEX_POINT('',#133013); +#133013 = CARTESIAN_POINT('',(8.52,-2.539400026226,-1.601695760584)); +#133014 = VERTEX_POINT('',#133015); +#133015 = CARTESIAN_POINT('',(8.52,-2.4844,-1.51744041214)); +#133016 = LINE('',#133017,#133018); +#133017 = CARTESIAN_POINT('',(8.52,-2.539400026226,-1.601695760584)); +#133018 = VECTOR('',#133019,1.); +#133019 = DIRECTION('',(0.,0.546622550435,0.837379118056)); +#133020 = ORIENTED_EDGE('',*,*,#133021,.T.); +#133021 = EDGE_CURVE('',#133014,#133022,#133024,.T.); +#133022 = VERTEX_POINT('',#133023); +#133023 = CARTESIAN_POINT('',(8.52,-2.44315,-1.489355309105)); +#133024 = LINE('',#133025,#133026); +#133025 = CARTESIAN_POINT('',(8.52,-2.4844,-1.51744041214)); +#133026 = VECTOR('',#133027,1.); +#133027 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#133028 = ORIENTED_EDGE('',*,*,#133029,.T.); +#133029 = EDGE_CURVE('',#133022,#133030,#133032,.T.); +#133030 = VERTEX_POINT('',#133031); +#133031 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.475312757587)); +#133032 = LINE('',#133033,#133034); +#133033 = CARTESIAN_POINT('',(8.52,-2.44315,-1.489355309105)); +#133034 = VECTOR('',#133035,1.); +#133035 = DIRECTION('',(0.,0.97977069431,0.200123428343)); +#133036 = ORIENTED_EDGE('',*,*,#133037,.T.); +#133037 = EDGE_CURVE('',#133030,#133038,#133040,.T.); +#133038 = VERTEX_POINT('',#133039); +#133039 = CARTESIAN_POINT('',(8.52,-2.305649973774,-1.489355309105)); +#133040 = LINE('',#133041,#133042); +#133041 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.475312757587)); +#133042 = VECTOR('',#133043,1.); +#133043 = DIRECTION('',(0.,0.979770739215,-0.200123208493)); +#133044 = ORIENTED_EDGE('',*,*,#133045,.T.); +#133045 = EDGE_CURVE('',#133038,#133046,#133048,.T.); +#133046 = VERTEX_POINT('',#133047); +#133047 = CARTESIAN_POINT('',(8.52,-2.264399973774,-1.51744041214)); +#133048 = LINE('',#133049,#133050); +#133049 = CARTESIAN_POINT('',(8.52,-2.305649973774,-1.489355309105)); +#133050 = VECTOR('',#133051,1.); +#133051 = DIRECTION('',(0.,0.8265992788,-0.562790931242)); +#133052 = ORIENTED_EDGE('',*,*,#133053,.T.); +#133053 = EDGE_CURVE('',#133046,#133054,#133056,.T.); +#133054 = VERTEX_POINT('',#133055); +#133055 = CARTESIAN_POINT('',(8.52,-2.209400026226,-1.601695760584)); +#133056 = LINE('',#133057,#133058); +#133057 = CARTESIAN_POINT('',(8.52,-2.264399973774,-1.51744041214)); +#133058 = VECTOR('',#133059,1.); +#133059 = DIRECTION('',(0.,0.546622002129,-0.837379475978)); +#133060 = ORIENTED_EDGE('',*,*,#133061,.T.); +#133061 = EDGE_CURVE('',#133054,#133062,#133064,.T.); +#133062 = VERTEX_POINT('',#133063); +#133063 = CARTESIAN_POINT('',(8.52,-2.19565,-1.685951069689)); +#133064 = LINE('',#133065,#133066); +#133065 = CARTESIAN_POINT('',(8.52,-2.209400026226,-1.601695760584)); +#133066 = VECTOR('',#133067,1.); +#133067 = DIRECTION('',(0.,0.161064095744,-0.986943948288)); +#133068 = ORIENTED_EDGE('',*,*,#133069,.T.); +#133069 = EDGE_CURVE('',#133062,#133070,#133072,.T.); +#133070 = VERTEX_POINT('',#133071); +#133071 = CARTESIAN_POINT('',(8.52,-2.19565,-1.784248930311)); +#133072 = LINE('',#133073,#133074); +#133073 = CARTESIAN_POINT('',(8.52,-2.19565,-1.685951069689)); +#133074 = VECTOR('',#133075,1.); +#133075 = DIRECTION('',(0.,0.,-1.)); +#133076 = ORIENTED_EDGE('',*,*,#133077,.T.); +#133077 = EDGE_CURVE('',#133070,#133078,#133080,.T.); +#133078 = VERTEX_POINT('',#133079); +#133079 = CARTESIAN_POINT('',(8.52,-2.209400026226,-1.868504259086)); +#133080 = LINE('',#133081,#133082); +#133081 = CARTESIAN_POINT('',(8.52,-2.19565,-1.784248930311)); +#133082 = VECTOR('',#133083,1.); +#133083 = DIRECTION('',(0.,-0.161064059119,-0.986943954265)); +#133084 = ORIENTED_EDGE('',*,*,#133085,.T.); +#133085 = EDGE_CURVE('',#133078,#133086,#133088,.T.); +#133086 = VERTEX_POINT('',#133087); +#133087 = CARTESIAN_POINT('',(8.52,-2.264399973774,-1.952759578025)); +#133088 = LINE('',#133089,#133090); +#133089 = CARTESIAN_POINT('',(8.52,-2.209400026226,-1.868504259086)); +#133090 = VECTOR('',#133091,1.); +#133091 = DIRECTION('',(0.,-0.546622136349,-0.837379388362)); +#133092 = ORIENTED_EDGE('',*,*,#133093,.T.); +#133093 = EDGE_CURVE('',#133086,#133094,#133096,.T.); +#133094 = VERTEX_POINT('',#133095); +#133095 = CARTESIAN_POINT('',(8.52,-2.305649973774,-1.98084468106)); +#133096 = LINE('',#133097,#133098); +#133097 = CARTESIAN_POINT('',(8.52,-2.264399973774,-1.952759578025)); +#133098 = VECTOR('',#133099,1.); +#133099 = DIRECTION('',(0.,-0.8265992788,-0.562790931242)); +#133100 = ORIENTED_EDGE('',*,*,#133101,.T.); +#133101 = EDGE_CURVE('',#133094,#133102,#133104,.T.); +#133102 = VERTEX_POINT('',#133103); +#133103 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.994887232578)); +#133104 = LINE('',#133105,#133106); +#133105 = CARTESIAN_POINT('',(8.52,-2.305649973774,-1.98084468106)); +#133106 = VECTOR('',#133107,1.); +#133107 = DIRECTION('',(0.,-0.979770739215,-0.200123208493)); +#133108 = ORIENTED_EDGE('',*,*,#133109,.T.); +#133109 = EDGE_CURVE('',#133102,#133110,#133112,.T.); +#133110 = VERTEX_POINT('',#133111); +#133111 = CARTESIAN_POINT('',(8.52,-2.44315,-1.98084468106)); +#133112 = LINE('',#133113,#133114); +#133113 = CARTESIAN_POINT('',(8.52,-2.374400026226,-1.994887232578)); +#133114 = VECTOR('',#133115,1.); +#133115 = DIRECTION('',(0.,-0.97977069431,0.200123428343)); +#133116 = ORIENTED_EDGE('',*,*,#133117,.T.); +#133117 = EDGE_CURVE('',#133110,#133118,#133120,.T.); +#133118 = VERTEX_POINT('',#133119); +#133119 = CARTESIAN_POINT('',(8.52,-2.4844,-1.952759578025)); +#133120 = LINE('',#133121,#133122); +#133121 = CARTESIAN_POINT('',(8.52,-2.44315,-1.98084468106)); +#133122 = VECTOR('',#133123,1.); +#133123 = DIRECTION('',(0.,-0.8265992788,0.562790931242)); +#133124 = ORIENTED_EDGE('',*,*,#133125,.T.); +#133125 = EDGE_CURVE('',#133118,#133126,#133128,.T.); +#133126 = VERTEX_POINT('',#133127); +#133127 = CARTESIAN_POINT('',(8.52,-2.539400026226,-1.868504259086)); +#133128 = LINE('',#133129,#133130); +#133129 = CARTESIAN_POINT('',(8.52,-2.4844,-1.952759578025)); +#133130 = VECTOR('',#133131,1.); +#133131 = DIRECTION('',(0.,-0.546622684656,0.83737903044)); +#133132 = ORIENTED_EDGE('',*,*,#133133,.T.); +#133133 = EDGE_CURVE('',#133126,#133134,#133136,.T.); +#133134 = VERTEX_POINT('',#133135); +#133135 = CARTESIAN_POINT('',(8.52,-2.553149973774,-1.784248930311)); +#133136 = LINE('',#133137,#133138); +#133137 = CARTESIAN_POINT('',(8.52,-2.539400026226,-1.868504259086)); +#133138 = VECTOR('',#133139,1.); +#133139 = DIRECTION('',(0.,-0.161063161412,0.986944100766)); +#133140 = ORIENTED_EDGE('',*,*,#133141,.T.); +#133141 = EDGE_CURVE('',#133134,#133142,#133144,.T.); +#133142 = VERTEX_POINT('',#133143); +#133143 = CARTESIAN_POINT('',(8.52,-2.553149973774,-1.685951069689)); +#133144 = LINE('',#133145,#133146); +#133145 = CARTESIAN_POINT('',(8.52,-2.553149973774,-1.784248930311)); +#133146 = VECTOR('',#133147,1.); +#133147 = DIRECTION('',(0.,0.,1.)); +#133148 = ORIENTED_EDGE('',*,*,#133149,.T.); +#133149 = EDGE_CURVE('',#133142,#133012,#133150,.T.); +#133150 = LINE('',#133151,#133152); +#133151 = CARTESIAN_POINT('',(8.52,-2.553149973774,-1.685951069689)); +#133152 = VECTOR('',#133153,1.); +#133153 = DIRECTION('',(0.,0.161063198037,0.986944094789)); +#133154 = PLANE('',#133155); +#133155 = AXIS2_PLACEMENT_3D('',#133156,#133157,#133158); +#133156 = CARTESIAN_POINT('',(8.52,4.75,0.)); +#133157 = DIRECTION('',(1.,0.,0.)); +#133158 = DIRECTION('',(0.,-1.,0.)); +#133159 = ADVANCED_FACE('',(#133160,#133314,#133396),#133478,.T.); +#133160 = FACE_BOUND('',#133161,.T.); +#133161 = EDGE_LOOP('',(#133162,#133172,#133180,#133188,#133196,#133204, + #133212,#133220,#133228,#133236,#133244,#133252,#133260,#133268, + #133276,#133284,#133292,#133300,#133308)); +#133162 = ORIENTED_EDGE('',*,*,#133163,.T.); +#133163 = EDGE_CURVE('',#133164,#133166,#133168,.T.); +#133164 = VERTEX_POINT('',#133165); +#133165 = CARTESIAN_POINT('',(8.52,2.7948,-1.685951066113)); +#133166 = VERTEX_POINT('',#133167); +#133167 = CARTESIAN_POINT('',(8.52,2.8323,-1.634887242413)); +#133168 = LINE('',#133169,#133170); +#133169 = CARTESIAN_POINT('',(8.52,2.7948,-1.685951066113)); +#133170 = VECTOR('',#133171,1.); +#133171 = DIRECTION('',(0.,0.59190954875,0.806004395831)); +#133172 = ORIENTED_EDGE('',*,*,#133173,.T.); +#133173 = EDGE_CURVE('',#133166,#133174,#133176,.T.); +#133174 = VERTEX_POINT('',#133175); +#133175 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.596589374638)); +#133176 = LINE('',#133177,#133178); +#133177 = CARTESIAN_POINT('',(8.52,2.8323,-1.634887242413)); +#133178 = VECTOR('',#133179,1.); +#133179 = DIRECTION('',(0.,0.310279797551,0.950645279393)); +#133180 = ORIENTED_EDGE('',*,*,#133181,.T.); +#133181 = EDGE_CURVE('',#133174,#133182,#133184,.T.); +#133182 = VERTEX_POINT('',#133183); +#133183 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.545525515175)); +#133184 = LINE('',#133185,#133186); +#133185 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.596589374638)); +#133186 = VECTOR('',#133187,1.); +#133187 = DIRECTION('',(0.,0.,1.)); +#133188 = ORIENTED_EDGE('',*,*,#133189,.T.); +#133189 = EDGE_CURVE('',#133182,#133190,#133192,.T.); +#133190 = VERTEX_POINT('',#133191); +#133191 = CARTESIAN_POINT('',(8.52,2.8323,-1.5072276474)); +#133192 = LINE('',#133193,#133194); +#133193 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.545525515175)); +#133194 = VECTOR('',#133195,1.); +#133195 = DIRECTION('',(0.,-0.310279797551,0.950645279393)); +#133196 = ORIENTED_EDGE('',*,*,#133197,.T.); +#133197 = EDGE_CURVE('',#133190,#133198,#133200,.T.); +#133198 = VERTEX_POINT('',#133199); +#133199 = CARTESIAN_POINT('',(8.52,2.7948,-1.4561638237)); +#133200 = LINE('',#133201,#133202); +#133201 = CARTESIAN_POINT('',(8.52,2.8323,-1.5072276474)); +#133202 = VECTOR('',#133203,1.); +#133203 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#133204 = ORIENTED_EDGE('',*,*,#133205,.T.); +#133205 = EDGE_CURVE('',#133198,#133206,#133208,.T.); +#133206 = VERTEX_POINT('',#133207); +#133207 = CARTESIAN_POINT('',(8.52,2.744800011921,-1.417865955925)); +#133208 = LINE('',#133209,#133210); +#133209 = CARTESIAN_POINT('',(8.52,2.7948,-1.4561638237)); +#133210 = VECTOR('',#133211,1.); +#133211 = DIRECTION('',(0.,-0.793878111009,0.608076923474)); +#133212 = ORIENTED_EDGE('',*,*,#133213,.T.); +#133213 = EDGE_CURVE('',#133206,#133214,#133216,.T.); +#133214 = VERTEX_POINT('',#133215); +#133215 = CARTESIAN_POINT('',(8.52,2.6823,-1.4051)); +#133216 = LINE('',#133217,#133218); +#133217 = CARTESIAN_POINT('',(8.52,2.744800011921,-1.417865955925)); +#133218 = VECTOR('',#133219,1.); +#133219 = DIRECTION('',(0.,-0.979770716763,0.200123318418)); +#133220 = ORIENTED_EDGE('',*,*,#133221,.T.); +#133221 = EDGE_CURVE('',#133214,#133222,#133224,.T.); +#133222 = VERTEX_POINT('',#133223); +#133223 = CARTESIAN_POINT('',(8.52,2.3823,-1.4051)); +#133224 = LINE('',#133225,#133226); +#133225 = CARTESIAN_POINT('',(8.52,2.6823,-1.4051)); +#133226 = VECTOR('',#133227,1.); +#133227 = DIRECTION('',(0.,-1.,0.)); +#133228 = ORIENTED_EDGE('',*,*,#133229,.T.); +#133229 = EDGE_CURVE('',#133222,#133230,#133232,.T.); +#133230 = VERTEX_POINT('',#133231); +#133231 = CARTESIAN_POINT('',(8.52,2.3823,-2.0051)); +#133232 = LINE('',#133233,#133234); +#133233 = CARTESIAN_POINT('',(8.52,2.3823,-1.4051)); +#133234 = VECTOR('',#133235,1.); +#133235 = DIRECTION('',(0.,0.,-1.)); +#133236 = ORIENTED_EDGE('',*,*,#133237,.T.); +#133237 = EDGE_CURVE('',#133230,#133238,#133240,.T.); +#133238 = VERTEX_POINT('',#133239); +#133239 = CARTESIAN_POINT('',(8.52,2.6823,-2.0051)); +#133240 = LINE('',#133241,#133242); +#133241 = CARTESIAN_POINT('',(8.52,2.3823,-2.0051)); +#133242 = VECTOR('',#133243,1.); +#133243 = DIRECTION('',(0.,1.,0.)); +#133244 = ORIENTED_EDGE('',*,*,#133245,.T.); +#133245 = EDGE_CURVE('',#133238,#133246,#133248,.T.); +#133246 = VERTEX_POINT('',#133247); +#133247 = CARTESIAN_POINT('',(8.52,2.744800011921,-1.992334042957)); +#133248 = LINE('',#133249,#133250); +#133249 = CARTESIAN_POINT('',(8.52,2.6823,-2.0051)); +#133250 = VECTOR('',#133251,1.); +#133251 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#133252 = ORIENTED_EDGE('',*,*,#133253,.T.); +#133253 = EDGE_CURVE('',#133246,#133254,#133256,.T.); +#133254 = VERTEX_POINT('',#133255); +#133255 = CARTESIAN_POINT('',(8.52,2.7948,-1.95403617183)); +#133256 = LINE('',#133257,#133258); +#133257 = CARTESIAN_POINT('',(8.52,2.744800011921,-1.992334042957)); +#133258 = VECTOR('',#133259,1.); +#133259 = DIRECTION('',(0.,0.793878085311,0.608076957024)); +#133260 = ORIENTED_EDGE('',*,*,#133261,.T.); +#133261 = EDGE_CURVE('',#133254,#133262,#133264,.T.); +#133262 = VERTEX_POINT('',#133263); +#133263 = CARTESIAN_POINT('',(8.52,2.8323,-1.902972343659)); +#133264 = LINE('',#133265,#133266); +#133265 = CARTESIAN_POINT('',(8.52,2.7948,-1.95403617183)); +#133266 = VECTOR('',#133267,1.); +#133267 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#133268 = ORIENTED_EDGE('',*,*,#133269,.T.); +#133269 = EDGE_CURVE('',#133262,#133270,#133272,.T.); +#133270 = VERTEX_POINT('',#133271); +#133271 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.864674466944)); +#133272 = LINE('',#133273,#133274); +#133273 = CARTESIAN_POINT('',(8.52,2.8323,-1.902972343659)); +#133274 = VECTOR('',#133275,1.); +#133275 = DIRECTION('',(0.,0.310279732089,0.950645300759)); +#133276 = ORIENTED_EDGE('',*,*,#133277,.T.); +#133277 = EDGE_CURVE('',#133270,#133278,#133280,.T.); +#133278 = VERTEX_POINT('',#133279); +#133279 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.800844687319)); +#133280 = LINE('',#133281,#133282); +#133281 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.864674466944)); +#133282 = VECTOR('',#133283,1.); +#133283 = DIRECTION('',(0.,0.,1.)); +#133284 = ORIENTED_EDGE('',*,*,#133285,.T.); +#133285 = EDGE_CURVE('',#133278,#133286,#133288,.T.); +#133286 = VERTEX_POINT('',#133287); +#133287 = CARTESIAN_POINT('',(8.52,2.8323,-1.762546801662)); +#133288 = LINE('',#133289,#133290); +#133289 = CARTESIAN_POINT('',(8.52,2.844799988079,-1.800844687319)); +#133290 = VECTOR('',#133291,1.); +#133291 = DIRECTION('',(0.,-0.310279666627,0.950645322125)); +#133292 = ORIENTED_EDGE('',*,*,#133293,.T.); +#133293 = EDGE_CURVE('',#133286,#133294,#133296,.T.); +#133294 = VERTEX_POINT('',#133295); +#133295 = CARTESIAN_POINT('',(8.52,2.7948,-1.711482977962)); +#133296 = LINE('',#133297,#133298); +#133297 = CARTESIAN_POINT('',(8.52,2.8323,-1.762546801662)); +#133298 = VECTOR('',#133299,1.); +#133299 = DIRECTION('',(0.,-0.59190954875,0.806004395831)); +#133300 = ORIENTED_EDGE('',*,*,#133301,.T.); +#133301 = EDGE_CURVE('',#133294,#133302,#133304,.T.); +#133302 = VERTEX_POINT('',#133303); +#133303 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.698717022038)); +#133304 = LINE('',#133305,#133306); +#133305 = CARTESIAN_POINT('',(8.52,2.7948,-1.711482977962)); +#133306 = VECTOR('',#133307,1.); +#133307 = DIRECTION('',(0.,-0.890605374698,0.454776941543)); +#133308 = ORIENTED_EDGE('',*,*,#133309,.T.); +#133309 = EDGE_CURVE('',#133302,#133164,#133310,.T.); +#133310 = LINE('',#133311,#133312); +#133311 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.698717022038)); +#133312 = VECTOR('',#133313,1.); +#133313 = DIRECTION('',(0.,0.890605374698,0.454776941543)); +#133314 = FACE_BOUND('',#133315,.T.); +#133315 = EDGE_LOOP('',(#133316,#133326,#133334,#133342,#133350,#133358, + #133366,#133374,#133382,#133390)); +#133316 = ORIENTED_EDGE('',*,*,#133317,.T.); +#133317 = EDGE_CURVE('',#133318,#133320,#133322,.T.); +#133318 = VERTEX_POINT('',#133319); +#133319 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.48169573555)); +#133320 = VERTEX_POINT('',#133321); +#133321 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.494461691475)); +#133322 = LINE('',#133323,#133324); +#133323 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.48169573555)); +#133324 = VECTOR('',#133325,1.); +#133325 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#133326 = ORIENTED_EDGE('',*,*,#133327,.T.); +#133327 = EDGE_CURVE('',#133320,#133328,#133330,.T.); +#133328 = VERTEX_POINT('',#133329); +#133329 = CARTESIAN_POINT('',(8.52,2.7573,-1.519993603325)); +#133330 = LINE('',#133331,#133332); +#133331 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.494461691475)); +#133332 = VECTOR('',#133333,1.); +#133333 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#133334 = ORIENTED_EDGE('',*,*,#133335,.T.); +#133335 = EDGE_CURVE('',#133328,#133336,#133338,.T.); +#133336 = VERTEX_POINT('',#133337); +#133337 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.558291506863)); +#133338 = LINE('',#133339,#133340); +#133339 = CARTESIAN_POINT('',(8.52,2.7573,-1.519993603325)); +#133340 = VECTOR('',#133341,1.); +#133341 = DIRECTION('',(0.,0.310279535704,-0.950645364857)); +#133342 = ORIENTED_EDGE('',*,*,#133343,.T.); +#133343 = EDGE_CURVE('',#133336,#133344,#133346,.T.); +#133344 = VERTEX_POINT('',#133345); +#133345 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.583823418713)); +#133346 = LINE('',#133347,#133348); +#133347 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.558291506863)); +#133348 = VECTOR('',#133349,1.); +#133349 = DIRECTION('',(0.,0.,-1.)); +#133350 = ORIENTED_EDGE('',*,*,#133351,.T.); +#133351 = EDGE_CURVE('',#133344,#133352,#133354,.T.); +#133352 = VERTEX_POINT('',#133353); +#133353 = CARTESIAN_POINT('',(8.52,2.7573,-1.622121286488)); +#133354 = LINE('',#133355,#133356); +#133355 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.583823418713)); +#133356 = VECTOR('',#133357,1.); +#133357 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#133358 = ORIENTED_EDGE('',*,*,#133359,.T.); +#133359 = EDGE_CURVE('',#133352,#133360,#133362,.T.); +#133360 = VERTEX_POINT('',#133361); +#133361 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.647653198338)); +#133362 = LINE('',#133363,#133364); +#133363 = CARTESIAN_POINT('',(8.52,2.7573,-1.622121286488)); +#133364 = VECTOR('',#133365,1.); +#133365 = DIRECTION('',(0.,-0.699625005502,-0.714510218035)); +#133366 = ORIENTED_EDGE('',*,*,#133367,.T.); +#133367 = EDGE_CURVE('',#133360,#133368,#133370,.T.); +#133368 = VERTEX_POINT('',#133369); +#133369 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.660419154263)); +#133370 = LINE('',#133371,#133372); +#133371 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.647653198338)); +#133372 = VECTOR('',#133373,1.); +#133373 = DIRECTION('',(0.,-0.94664991777,-0.322263763377)); +#133374 = ORIENTED_EDGE('',*,*,#133375,.T.); +#133375 = EDGE_CURVE('',#133368,#133376,#133378,.T.); +#133376 = VERTEX_POINT('',#133377); +#133377 = CARTESIAN_POINT('',(8.52,2.4573,-1.660419154263)); +#133378 = LINE('',#133379,#133380); +#133379 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.660419154263)); +#133380 = VECTOR('',#133381,1.); +#133381 = DIRECTION('',(0.,-1.,0.)); +#133382 = ORIENTED_EDGE('',*,*,#133383,.T.); +#133383 = EDGE_CURVE('',#133376,#133384,#133386,.T.); +#133384 = VERTEX_POINT('',#133385); +#133385 = CARTESIAN_POINT('',(8.52,2.4573,-1.48169573555)); +#133386 = LINE('',#133387,#133388); +#133387 = CARTESIAN_POINT('',(8.52,2.4573,-1.660419154263)); +#133388 = VECTOR('',#133389,1.); +#133389 = DIRECTION('',(0.,0.,1.)); +#133390 = ORIENTED_EDGE('',*,*,#133391,.T.); +#133391 = EDGE_CURVE('',#133384,#133318,#133392,.T.); +#133392 = LINE('',#133393,#133394); +#133393 = CARTESIAN_POINT('',(8.52,2.4573,-1.48169573555)); +#133394 = VECTOR('',#133395,1.); +#133395 = DIRECTION('',(0.,1.,0.)); +#133396 = FACE_BOUND('',#133397,.T.); +#133397 = EDGE_LOOP('',(#133398,#133408,#133416,#133424,#133432,#133440, + #133448,#133456,#133464,#133472)); +#133398 = ORIENTED_EDGE('',*,*,#133399,.T.); +#133399 = EDGE_CURVE('',#133400,#133402,#133404,.T.); +#133400 = VERTEX_POINT('',#133401); +#133401 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.851908511019)); +#133402 = VERTEX_POINT('',#133403); +#133403 = CARTESIAN_POINT('',(8.52,2.7573,-1.890206378794)); +#133404 = LINE('',#133405,#133406); +#133405 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.851908511019)); +#133406 = VECTOR('',#133407,1.); +#133407 = DIRECTION('',(0.,-0.310279797551,-0.950645279393)); +#133408 = ORIENTED_EDGE('',*,*,#133409,.T.); +#133409 = EDGE_CURVE('',#133402,#133410,#133412,.T.); +#133410 = VERTEX_POINT('',#133411); +#133411 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.915738299584)); +#133412 = LINE('',#133413,#133414); +#133413 = CARTESIAN_POINT('',(8.52,2.7573,-1.890206378794)); +#133414 = VECTOR('',#133415,1.); +#133415 = DIRECTION('',(0.,-0.699624880427,-0.714510340504)); +#133416 = ORIENTED_EDGE('',*,*,#133417,.T.); +#133417 = EDGE_CURVE('',#133410,#133418,#133420,.T.); +#133418 = VERTEX_POINT('',#133419); +#133419 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.928504255509)); +#133420 = LINE('',#133421,#133422); +#133421 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.915738299584)); +#133422 = VECTOR('',#133423,1.); +#133423 = DIRECTION('',(0.,-0.94664991777,-0.322263763377)); +#133424 = ORIENTED_EDGE('',*,*,#133425,.T.); +#133425 = EDGE_CURVE('',#133418,#133426,#133428,.T.); +#133426 = VERTEX_POINT('',#133427); +#133427 = CARTESIAN_POINT('',(8.52,2.4573,-1.928504255509)); +#133428 = LINE('',#133429,#133430); +#133429 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.928504255509)); +#133430 = VECTOR('',#133431,1.); +#133431 = DIRECTION('',(0.,-1.,0.)); +#133432 = ORIENTED_EDGE('',*,*,#133433,.T.); +#133433 = EDGE_CURVE('',#133426,#133434,#133436,.T.); +#133434 = VERTEX_POINT('',#133435); +#133435 = CARTESIAN_POINT('',(8.52,2.4573,-1.737014889812)); +#133436 = LINE('',#133437,#133438); +#133437 = CARTESIAN_POINT('',(8.52,2.4573,-1.928504255509)); +#133438 = VECTOR('',#133439,1.); +#133439 = DIRECTION('',(0.,0.,1.)); +#133440 = ORIENTED_EDGE('',*,*,#133441,.T.); +#133441 = EDGE_CURVE('',#133434,#133442,#133444,.T.); +#133442 = VERTEX_POINT('',#133443); +#133443 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.737014889812)); +#133444 = LINE('',#133445,#133446); +#133445 = CARTESIAN_POINT('',(8.52,2.4573,-1.737014889812)); +#133446 = VECTOR('',#133447,1.); +#133447 = DIRECTION('',(0.,1.,0.)); +#133448 = ORIENTED_EDGE('',*,*,#133449,.T.); +#133449 = EDGE_CURVE('',#133442,#133450,#133452,.T.); +#133450 = VERTEX_POINT('',#133451); +#133451 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.749780845737)); +#133452 = LINE('',#133453,#133454); +#133453 = CARTESIAN_POINT('',(8.52,2.694799988079,-1.737014889812)); +#133454 = VECTOR('',#133455,1.); +#133455 = DIRECTION('',(0.,0.94664991777,-0.322263763377)); +#133456 = ORIENTED_EDGE('',*,*,#133457,.T.); +#133457 = EDGE_CURVE('',#133450,#133458,#133460,.T.); +#133458 = VERTEX_POINT('',#133459); +#133459 = CARTESIAN_POINT('',(8.52,2.7573,-1.775312757587)); +#133460 = LINE('',#133461,#133462); +#133461 = CARTESIAN_POINT('',(8.52,2.732299988079,-1.749780845737)); +#133462 = VECTOR('',#133463,1.); +#133463 = DIRECTION('',(0.,0.699625005502,-0.714510218035)); +#133464 = ORIENTED_EDGE('',*,*,#133465,.T.); +#133465 = EDGE_CURVE('',#133458,#133466,#133468,.T.); +#133466 = VERTEX_POINT('',#133467); +#133467 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.813610643244)); +#133468 = LINE('',#133469,#133470); +#133469 = CARTESIAN_POINT('',(8.52,2.7573,-1.775312757587)); +#133470 = VECTOR('',#133471,1.); +#133471 = DIRECTION('',(0.,0.310279666627,-0.950645322125)); +#133472 = ORIENTED_EDGE('',*,*,#133473,.T.); +#133473 = EDGE_CURVE('',#133466,#133400,#133474,.T.); +#133474 = LINE('',#133475,#133476); +#133475 = CARTESIAN_POINT('',(8.52,2.769799988079,-1.813610643244)); +#133476 = VECTOR('',#133477,1.); +#133477 = DIRECTION('',(0.,0.,-1.)); +#133478 = PLANE('',#133479); +#133479 = AXIS2_PLACEMENT_3D('',#133480,#133481,#133482); +#133480 = CARTESIAN_POINT('',(8.52,4.75,0.)); +#133481 = DIRECTION('',(1.,0.,0.)); +#133482 = DIRECTION('',(0.,-1.,0.)); +#133483 = ADVANCED_FACE('',(#133484),#133500,.T.); +#133484 = FACE_BOUND('',#133485,.T.); +#133485 = EDGE_LOOP('',(#133486,#133492,#133493,#133499)); +#133486 = ORIENTED_EDGE('',*,*,#133487,.T.); +#133487 = EDGE_CURVE('',#131071,#132634,#133488,.T.); +#133488 = LINE('',#133489,#133490); +#133489 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.826376604533)); +#133490 = VECTOR('',#133491,1.); +#133491 = DIRECTION('',(1.,0.,3.330669073876E-14)); +#133492 = ORIENTED_EDGE('',*,*,#132787,.F.); +#133493 = ORIENTED_EDGE('',*,*,#133494,.F.); +#133494 = EDGE_CURVE('',#130927,#132780,#133495,.T.); +#133495 = LINE('',#133496,#133497); +#133496 = CARTESIAN_POINT('',(8.5,-2.8144,-1.784248930311)); +#133497 = VECTOR('',#133498,1.); +#133498 = DIRECTION('',(1.,0.,-3.330669073876E-14)); +#133499 = ORIENTED_EDGE('',*,*,#131078,.T.); +#133500 = PLANE('',#133501); +#133501 = AXIS2_PLACEMENT_3D('',#133502,#133503,#133504); +#133502 = CARTESIAN_POINT('',(8.5,-2.8144,-1.784248930311)); +#133503 = DIRECTION('',(-0.,-0.950645322125,-0.310279666627)); +#133504 = DIRECTION('',(-1.,0.,0.)); +#133505 = ADVANCED_FACE('',(#133506),#133517,.T.); +#133506 = FACE_BOUND('',#133507,.T.); +#133507 = EDGE_LOOP('',(#133508,#133509,#133510,#133516)); +#133508 = ORIENTED_EDGE('',*,*,#133494,.T.); +#133509 = ORIENTED_EDGE('',*,*,#132779,.F.); +#133510 = ORIENTED_EDGE('',*,*,#133511,.F.); +#133511 = EDGE_CURVE('',#130925,#132772,#133512,.T.); +#133512 = LINE('',#133513,#133514); +#133513 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.756163827276)); +#133514 = VECTOR('',#133515,1.); +#133515 = DIRECTION('',(1.,2.220446049251E-14,-1.110223024625E-14)); +#133516 = ORIENTED_EDGE('',*,*,#130924,.T.); +#133517 = PLANE('',#133518); +#133518 = AXIS2_PLACEMENT_3D('',#133519,#133520,#133521); +#133519 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.756163827276)); +#133520 = DIRECTION('',(-0.,-0.714510218035,-0.699625005502)); +#133521 = DIRECTION('',(-1.,0.,0.)); +#133522 = ADVANCED_FACE('',(#133523),#133534,.T.); +#133523 = FACE_BOUND('',#133524,.T.); +#133524 = EDGE_LOOP('',(#133525,#133526,#133527,#133533)); +#133525 = ORIENTED_EDGE('',*,*,#133511,.T.); +#133526 = ORIENTED_EDGE('',*,*,#132771,.F.); +#133527 = ORIENTED_EDGE('',*,*,#133528,.F.); +#133528 = EDGE_CURVE('',#130935,#132764,#133529,.T.); +#133529 = LINE('',#133530,#133531); +#133530 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.728078724241)); +#133531 = VECTOR('',#133532,1.); +#133532 = DIRECTION('',(1.,0.,0.)); +#133533 = ORIENTED_EDGE('',*,*,#130934,.T.); +#133534 = PLANE('',#133535); +#133535 = AXIS2_PLACEMENT_3D('',#133536,#133537,#133538); +#133536 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.728078724241)); +#133537 = DIRECTION('',(-0.,-0.562790931242,-0.8265992788)); +#133538 = DIRECTION('',(-1.,0.,0.)); +#133539 = ADVANCED_FACE('',(#133540),#133551,.T.); +#133540 = FACE_BOUND('',#133541,.T.); +#133541 = EDGE_LOOP('',(#133542,#133543,#133544,#133550)); +#133542 = ORIENTED_EDGE('',*,*,#133528,.T.); +#133543 = ORIENTED_EDGE('',*,*,#132763,.F.); +#133544 = ORIENTED_EDGE('',*,*,#133545,.F.); +#133545 = EDGE_CURVE('',#130943,#132756,#133546,.T.); +#133546 = LINE('',#133547,#133548); +#133547 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.714036172724)); +#133548 = VECTOR('',#133549,1.); +#133549 = DIRECTION('',(1.,0.,0.)); +#133550 = ORIENTED_EDGE('',*,*,#130942,.T.); +#133551 = PLANE('',#133552); +#133552 = AXIS2_PLACEMENT_3D('',#133553,#133554,#133555); +#133553 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.714036172724)); +#133554 = DIRECTION('',(-0.,-0.322263901086,-0.946649870891)); +#133555 = DIRECTION('',(-1.,0.,0.)); +#133556 = ADVANCED_FACE('',(#133557),#133568,.T.); +#133557 = FACE_BOUND('',#133558,.T.); +#133558 = EDGE_LOOP('',(#133559,#133560,#133561,#133567)); +#133559 = ORIENTED_EDGE('',*,*,#133545,.T.); +#133560 = ORIENTED_EDGE('',*,*,#132755,.F.); +#133561 = ORIENTED_EDGE('',*,*,#133562,.F.); +#133562 = EDGE_CURVE('',#130951,#132748,#133563,.T.); +#133563 = LINE('',#133564,#133565); +#133564 = CARTESIAN_POINT('',(8.5,-3.02065,-1.714036172724)); +#133565 = VECTOR('',#133566,1.); +#133566 = DIRECTION('',(1.,0.,0.)); +#133567 = ORIENTED_EDGE('',*,*,#130950,.T.); +#133568 = PLANE('',#133569); +#133569 = AXIS2_PLACEMENT_3D('',#133570,#133571,#133572); +#133570 = CARTESIAN_POINT('',(8.5,-3.02065,-1.714036172724)); +#133571 = DIRECTION('',(0.,0.,-1.)); +#133572 = DIRECTION('',(-1.,0.,0.)); +#133573 = ADVANCED_FACE('',(#133574),#133585,.T.); +#133574 = FACE_BOUND('',#133575,.T.); +#133575 = EDGE_LOOP('',(#133576,#133577,#133578,#133584)); +#133576 = ORIENTED_EDGE('',*,*,#133562,.T.); +#133577 = ORIENTED_EDGE('',*,*,#132747,.F.); +#133578 = ORIENTED_EDGE('',*,*,#133579,.F.); +#133579 = EDGE_CURVE('',#130959,#132740,#133580,.T.); +#133580 = LINE('',#133581,#133582); +#133581 = CARTESIAN_POINT('',(8.5,-3.0619,-1.728078724241)); +#133582 = VECTOR('',#133583,1.); +#133583 = DIRECTION('',(1.,0.,0.)); +#133584 = ORIENTED_EDGE('',*,*,#130958,.T.); +#133585 = PLANE('',#133586); +#133586 = AXIS2_PLACEMENT_3D('',#133587,#133588,#133589); +#133587 = CARTESIAN_POINT('',(8.5,-3.0619,-1.728078724241)); +#133588 = DIRECTION('',(0.,0.322263763377,-0.94664991777)); +#133589 = DIRECTION('',(0.,0.94664991777,0.322263763377)); +#133590 = ADVANCED_FACE('',(#133591),#133602,.T.); +#133591 = FACE_BOUND('',#133592,.T.); +#133592 = EDGE_LOOP('',(#133593,#133594,#133595,#133601)); +#133593 = ORIENTED_EDGE('',*,*,#133579,.T.); +#133594 = ORIENTED_EDGE('',*,*,#132739,.F.); +#133595 = ORIENTED_EDGE('',*,*,#133596,.F.); +#133596 = EDGE_CURVE('',#130967,#132732,#133597,.T.); +#133597 = LINE('',#133598,#133599); +#133598 = CARTESIAN_POINT('',(8.5,-3.10315,-1.756163827276)); +#133599 = VECTOR('',#133600,1.); +#133600 = DIRECTION('',(1.,0.,0.)); +#133601 = ORIENTED_EDGE('',*,*,#130966,.T.); +#133602 = PLANE('',#133603); +#133603 = AXIS2_PLACEMENT_3D('',#133604,#133605,#133606); +#133604 = CARTESIAN_POINT('',(8.5,-3.10315,-1.756163827276)); +#133605 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#133606 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#133607 = ADVANCED_FACE('',(#133608),#133619,.T.); +#133608 = FACE_BOUND('',#133609,.T.); +#133609 = EDGE_LOOP('',(#133610,#133611,#133612,#133618)); +#133610 = ORIENTED_EDGE('',*,*,#133596,.T.); +#133611 = ORIENTED_EDGE('',*,*,#132731,.F.); +#133612 = ORIENTED_EDGE('',*,*,#133613,.F.); +#133613 = EDGE_CURVE('',#130975,#132724,#133614,.T.); +#133614 = LINE('',#133615,#133616); +#133615 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.784248930311)); +#133616 = VECTOR('',#133617,1.); +#133617 = DIRECTION('',(1.,0.,-3.330669073876E-14)); +#133618 = ORIENTED_EDGE('',*,*,#130974,.T.); +#133619 = PLANE('',#133620); +#133620 = AXIS2_PLACEMENT_3D('',#133621,#133622,#133623); +#133621 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.784248930311)); +#133622 = DIRECTION('',(0.,0.71451034311,-0.699624877766)); +#133623 = DIRECTION('',(0.,0.699624877766,0.71451034311)); +#133624 = ADVANCED_FACE('',(#133625),#133636,.T.); +#133625 = FACE_BOUND('',#133626,.T.); +#133626 = EDGE_LOOP('',(#133627,#133628,#133629,#133635)); +#133627 = ORIENTED_EDGE('',*,*,#133613,.T.); +#133628 = ORIENTED_EDGE('',*,*,#132723,.F.); +#133629 = ORIENTED_EDGE('',*,*,#133630,.F.); +#133630 = EDGE_CURVE('',#130983,#132716,#133631,.T.); +#133631 = LINE('',#133632,#133633); +#133632 = CARTESIAN_POINT('',(8.5,-3.1444,-1.826376604533)); +#133633 = VECTOR('',#133634,1.); +#133634 = DIRECTION('',(1.,0.,0.)); +#133635 = ORIENTED_EDGE('',*,*,#130982,.T.); +#133636 = PLANE('',#133637); +#133637 = AXIS2_PLACEMENT_3D('',#133638,#133639,#133640); +#133638 = CARTESIAN_POINT('',(8.5,-3.1444,-1.826376604533)); +#133639 = DIRECTION('',(0.,0.950645256663,-0.310279867191)); +#133640 = DIRECTION('',(0.,0.310279867191,0.950645256663)); +#133641 = ADVANCED_FACE('',(#133642),#133653,.T.); +#133642 = FACE_BOUND('',#133643,.T.); +#133643 = EDGE_LOOP('',(#133644,#133645,#133646,#133652)); +#133644 = ORIENTED_EDGE('',*,*,#133630,.T.); +#133645 = ORIENTED_EDGE('',*,*,#132715,.F.); +#133646 = ORIENTED_EDGE('',*,*,#133647,.F.); +#133647 = EDGE_CURVE('',#130991,#132708,#133648,.T.); +#133648 = LINE('',#133649,#133650); +#133649 = CARTESIAN_POINT('',(8.5,-3.1444,-1.868504259086)); +#133650 = VECTOR('',#133651,1.); +#133651 = DIRECTION('',(1.,0.,0.)); +#133652 = ORIENTED_EDGE('',*,*,#130990,.T.); +#133653 = PLANE('',#133654); +#133654 = AXIS2_PLACEMENT_3D('',#133655,#133656,#133657); +#133655 = CARTESIAN_POINT('',(8.5,-3.1444,-1.868504259086)); +#133656 = DIRECTION('',(0.,1.,0.)); +#133657 = DIRECTION('',(0.,-0.,1.)); +#133658 = ADVANCED_FACE('',(#133659),#133670,.T.); +#133659 = FACE_BOUND('',#133660,.T.); +#133660 = EDGE_LOOP('',(#133661,#133662,#133663,#133669)); +#133661 = ORIENTED_EDGE('',*,*,#133647,.T.); +#133662 = ORIENTED_EDGE('',*,*,#132707,.F.); +#133663 = ORIENTED_EDGE('',*,*,#133664,.F.); +#133664 = EDGE_CURVE('',#130999,#132700,#133665,.T.); +#133665 = LINE('',#133666,#133667); +#133666 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.910631913638)); +#133667 = VECTOR('',#133668,1.); +#133668 = DIRECTION('',(1.,0.,0.)); +#133669 = ORIENTED_EDGE('',*,*,#130998,.T.); +#133670 = PLANE('',#133671); +#133671 = AXIS2_PLACEMENT_3D('',#133672,#133673,#133674); +#133672 = CARTESIAN_POINT('',(8.5,-3.130650003278,-1.910631913638)); +#133673 = DIRECTION('',(-0.,0.950645213931,0.310279998114)); +#133674 = DIRECTION('',(1.,0.,0.)); +#133675 = ADVANCED_FACE('',(#133676),#133687,.T.); +#133676 = FACE_BOUND('',#133677,.T.); +#133677 = EDGE_LOOP('',(#133678,#133679,#133680,#133686)); +#133678 = ORIENTED_EDGE('',*,*,#133664,.T.); +#133679 = ORIENTED_EDGE('',*,*,#132699,.F.); +#133680 = ORIENTED_EDGE('',*,*,#133681,.F.); +#133681 = EDGE_CURVE('',#131007,#132692,#133682,.T.); +#133682 = LINE('',#133683,#133684); +#133683 = CARTESIAN_POINT('',(8.5,-3.10315,-1.952759578025)); +#133684 = VECTOR('',#133685,1.); +#133685 = DIRECTION('',(1.,0.,0.)); +#133686 = ORIENTED_EDGE('',*,*,#131006,.T.); +#133687 = PLANE('',#133688); +#133688 = AXIS2_PLACEMENT_3D('',#133689,#133690,#133691); +#133689 = CARTESIAN_POINT('',(8.5,-3.10315,-1.952759578025)); +#133690 = DIRECTION('',(-0.,0.837379149126,0.546622502839)); +#133691 = DIRECTION('',(1.,0.,0.)); +#133692 = ADVANCED_FACE('',(#133693),#133704,.T.); +#133693 = FACE_BOUND('',#133694,.T.); +#133694 = EDGE_LOOP('',(#133695,#133696,#133697,#133703)); +#133695 = ORIENTED_EDGE('',*,*,#133681,.T.); +#133696 = ORIENTED_EDGE('',*,*,#132691,.F.); +#133697 = ORIENTED_EDGE('',*,*,#133698,.F.); +#133698 = EDGE_CURVE('',#131015,#132684,#133699,.T.); +#133699 = LINE('',#133700,#133701); +#133700 = CARTESIAN_POINT('',(8.5,-3.0619,-1.98084468106)); +#133701 = VECTOR('',#133702,1.); +#133702 = DIRECTION('',(1.,0.,0.)); +#133703 = ORIENTED_EDGE('',*,*,#131014,.T.); +#133704 = PLANE('',#133705); +#133705 = AXIS2_PLACEMENT_3D('',#133706,#133707,#133708); +#133706 = CARTESIAN_POINT('',(8.5,-3.0619,-1.98084468106)); +#133707 = DIRECTION('',(-0.,0.562790931242,0.8265992788)); +#133708 = DIRECTION('',(1.,0.,0.)); +#133709 = ADVANCED_FACE('',(#133710),#133721,.T.); +#133710 = FACE_BOUND('',#133711,.T.); +#133711 = EDGE_LOOP('',(#133712,#133713,#133714,#133720)); +#133712 = ORIENTED_EDGE('',*,*,#133698,.T.); +#133713 = ORIENTED_EDGE('',*,*,#132683,.F.); +#133714 = ORIENTED_EDGE('',*,*,#133715,.F.); +#133715 = EDGE_CURVE('',#131023,#132676,#133716,.T.); +#133716 = LINE('',#133717,#133718); +#133717 = CARTESIAN_POINT('',(8.5,-3.02065,-1.994887232578)); +#133718 = VECTOR('',#133719,1.); +#133719 = DIRECTION('',(1.,0.,0.)); +#133720 = ORIENTED_EDGE('',*,*,#131022,.T.); +#133721 = PLANE('',#133722); +#133722 = AXIS2_PLACEMENT_3D('',#133723,#133724,#133725); +#133723 = CARTESIAN_POINT('',(8.5,-3.02065,-1.994887232578)); +#133724 = DIRECTION('',(-0.,0.322263763377,0.94664991777)); +#133725 = DIRECTION('',(1.,0.,0.)); +#133726 = ADVANCED_FACE('',(#133727),#133738,.T.); +#133727 = FACE_BOUND('',#133728,.T.); +#133728 = EDGE_LOOP('',(#133729,#133730,#133731,#133737)); +#133729 = ORIENTED_EDGE('',*,*,#133715,.T.); +#133730 = ORIENTED_EDGE('',*,*,#132675,.F.); +#133731 = ORIENTED_EDGE('',*,*,#133732,.F.); +#133732 = EDGE_CURVE('',#131031,#132668,#133733,.T.); +#133733 = LINE('',#133734,#133735); +#133734 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.994887232578)); +#133735 = VECTOR('',#133736,1.); +#133736 = DIRECTION('',(1.,0.,0.)); +#133737 = ORIENTED_EDGE('',*,*,#131030,.T.); +#133738 = PLANE('',#133739); +#133739 = AXIS2_PLACEMENT_3D('',#133740,#133741,#133742); +#133740 = CARTESIAN_POINT('',(8.5,-2.924399993443,-1.994887232578)); +#133741 = DIRECTION('',(0.,0.,1.)); +#133742 = DIRECTION('',(0.,-1.,0.)); +#133743 = ADVANCED_FACE('',(#133744),#133755,.T.); +#133744 = FACE_BOUND('',#133745,.T.); +#133745 = EDGE_LOOP('',(#133746,#133747,#133748,#133754)); +#133746 = ORIENTED_EDGE('',*,*,#133732,.T.); +#133747 = ORIENTED_EDGE('',*,*,#132667,.F.); +#133748 = ORIENTED_EDGE('',*,*,#133749,.F.); +#133749 = EDGE_CURVE('',#131039,#132660,#133750,.T.); +#133750 = LINE('',#133751,#133752); +#133751 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.98084468106)); +#133752 = VECTOR('',#133753,1.); +#133753 = DIRECTION('',(1.,0.,0.)); +#133754 = ORIENTED_EDGE('',*,*,#131038,.T.); +#133755 = PLANE('',#133756); +#133756 = AXIS2_PLACEMENT_3D('',#133757,#133758,#133759); +#133757 = CARTESIAN_POINT('',(8.5,-2.883150013113,-1.98084468106)); +#133758 = DIRECTION('',(0.,-0.322263901086,0.946649870891)); +#133759 = DIRECTION('',(-1.,0.,0.)); +#133760 = ADVANCED_FACE('',(#133761),#133772,.T.); +#133761 = FACE_BOUND('',#133762,.T.); +#133762 = EDGE_LOOP('',(#133763,#133764,#133765,#133771)); +#133763 = ORIENTED_EDGE('',*,*,#133749,.T.); +#133764 = ORIENTED_EDGE('',*,*,#132659,.F.); +#133765 = ORIENTED_EDGE('',*,*,#133766,.F.); +#133766 = EDGE_CURVE('',#131047,#132652,#133767,.T.); +#133767 = LINE('',#133768,#133769); +#133768 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.952759578025)); +#133769 = VECTOR('',#133770,1.); +#133770 = DIRECTION('',(1.,0.,0.)); +#133771 = ORIENTED_EDGE('',*,*,#131046,.T.); +#133772 = PLANE('',#133773); +#133773 = AXIS2_PLACEMENT_3D('',#133774,#133775,#133776); +#133774 = CARTESIAN_POINT('',(8.5,-2.841900013113,-1.952759578025)); +#133775 = DIRECTION('',(0.,-0.562790931242,0.8265992788)); +#133776 = DIRECTION('',(-1.,0.,0.)); +#133777 = ADVANCED_FACE('',(#133778),#133789,.T.); +#133778 = FACE_BOUND('',#133779,.T.); +#133779 = EDGE_LOOP('',(#133780,#133781,#133782,#133788)); +#133780 = ORIENTED_EDGE('',*,*,#133766,.T.); +#133781 = ORIENTED_EDGE('',*,*,#132651,.F.); +#133782 = ORIENTED_EDGE('',*,*,#133783,.F.); +#133783 = EDGE_CURVE('',#131055,#132644,#133784,.T.); +#133784 = LINE('',#133785,#133786); +#133785 = CARTESIAN_POINT('',(8.5,-2.8144,-1.910631913638)); +#133786 = VECTOR('',#133787,1.); +#133787 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#133788 = ORIENTED_EDGE('',*,*,#131054,.T.); +#133789 = PLANE('',#133790); +#133790 = AXIS2_PLACEMENT_3D('',#133791,#133792,#133793); +#133791 = CARTESIAN_POINT('',(8.5,-2.8144,-1.910631913638)); +#133792 = DIRECTION('',(0.,-0.837379059645,0.546622639915)); +#133793 = DIRECTION('',(-1.,0.,0.)); +#133794 = ADVANCED_FACE('',(#133795),#133806,.T.); +#133795 = FACE_BOUND('',#133796,.T.); +#133796 = EDGE_LOOP('',(#133797,#133798,#133799,#133805)); +#133797 = ORIENTED_EDGE('',*,*,#133783,.T.); +#133798 = ORIENTED_EDGE('',*,*,#132643,.F.); +#133799 = ORIENTED_EDGE('',*,*,#133800,.F.); +#133800 = EDGE_CURVE('',#131063,#132636,#133801,.T.); +#133801 = LINE('',#133802,#133803); +#133802 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.868504259086)); +#133803 = VECTOR('',#133804,1.); +#133804 = DIRECTION('',(1.,0.,0.)); +#133805 = ORIENTED_EDGE('',*,*,#131062,.T.); +#133806 = PLANE('',#133807); +#133807 = AXIS2_PLACEMENT_3D('',#133808,#133809,#133810); +#133808 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.868504259086)); +#133809 = DIRECTION('',(0.,-0.950645279393,0.310279797551)); +#133810 = DIRECTION('',(-1.,0.,0.)); +#133811 = ADVANCED_FACE('',(#133812),#133818,.T.); +#133812 = FACE_BOUND('',#133813,.T.); +#133813 = EDGE_LOOP('',(#133814,#133815,#133816,#133817)); +#133814 = ORIENTED_EDGE('',*,*,#133800,.T.); +#133815 = ORIENTED_EDGE('',*,*,#132633,.F.); +#133816 = ORIENTED_EDGE('',*,*,#133487,.F.); +#133817 = ORIENTED_EDGE('',*,*,#131070,.T.); +#133818 = PLANE('',#133819); +#133819 = AXIS2_PLACEMENT_3D('',#133820,#133821,#133822); +#133820 = CARTESIAN_POINT('',(8.5,-2.800650013113,-1.826376604533)); +#133821 = DIRECTION('',(0.,-1.,0.)); +#133822 = DIRECTION('',(1.,0.,0.)); +#133823 = ADVANCED_FACE('',(#133824),#133840,.T.); +#133824 = FACE_BOUND('',#133825,.T.); +#133825 = EDGE_LOOP('',(#133826,#133832,#133833,#133839)); +#133826 = ORIENTED_EDGE('',*,*,#133827,.T.); +#133827 = EDGE_CURVE('',#130903,#132802,#133828,.T.); +#133828 = LINE('',#133829,#133830); +#133829 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.798291481829)); +#133830 = VECTOR('',#133831,1.); +#133831 = DIRECTION('',(1.,0.,0.)); +#133832 = ORIENTED_EDGE('',*,*,#133003,.F.); +#133833 = ORIENTED_EDGE('',*,*,#133834,.F.); +#133834 = EDGE_CURVE('',#130711,#132996,#133835,.T.); +#133835 = LINE('',#133836,#133837); +#133836 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.671908518171)); +#133837 = VECTOR('',#133838,1.); +#133838 = DIRECTION('',(1.,0.,0.)); +#133839 = ORIENTED_EDGE('',*,*,#130910,.T.); +#133840 = PLANE('',#133841); +#133841 = AXIS2_PLACEMENT_3D('',#133842,#133843,#133844); +#133842 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.671908518171)); +#133843 = DIRECTION('',(0.,-1.,0.)); +#133844 = DIRECTION('',(1.,0.,0.)); +#133845 = ADVANCED_FACE('',(#133846),#133857,.T.); +#133846 = FACE_BOUND('',#133847,.T.); +#133847 = EDGE_LOOP('',(#133848,#133849,#133850,#133856)); +#133848 = ORIENTED_EDGE('',*,*,#133834,.T.); +#133849 = ORIENTED_EDGE('',*,*,#132995,.F.); +#133850 = ORIENTED_EDGE('',*,*,#133851,.F.); +#133851 = EDGE_CURVE('',#130709,#132988,#133852,.T.); +#133852 = LINE('',#133853,#133854); +#133853 = CARTESIAN_POINT('',(8.5,-2.60815,-1.601695760584)); +#133854 = VECTOR('',#133855,1.); +#133855 = DIRECTION('',(1.,0.,-2.220446049251E-14)); +#133856 = ORIENTED_EDGE('',*,*,#130708,.T.); +#133857 = PLANE('',#133858); +#133858 = AXIS2_PLACEMENT_3D('',#133859,#133860,#133861); +#133859 = CARTESIAN_POINT('',(8.5,-2.60815,-1.601695760584)); +#133860 = DIRECTION('',(0.,-0.98135916906,0.192182676904)); +#133861 = DIRECTION('',(-1.,0.,0.)); +#133862 = ADVANCED_FACE('',(#133863),#133874,.T.); +#133863 = FACE_BOUND('',#133864,.T.); +#133864 = EDGE_LOOP('',(#133865,#133866,#133867,#133873)); +#133865 = ORIENTED_EDGE('',*,*,#133851,.T.); +#133866 = ORIENTED_EDGE('',*,*,#132987,.F.); +#133867 = ORIENTED_EDGE('',*,*,#133868,.F.); +#133868 = EDGE_CURVE('',#130719,#132980,#133869,.T.); +#133869 = LINE('',#133870,#133871); +#133870 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.559568066692)); +#133871 = VECTOR('',#133872,1.); +#133872 = DIRECTION('',(1.,-2.220446049251E-14,-1.110223024625E-14)); +#133873 = ORIENTED_EDGE('',*,*,#130718,.T.); +#133874 = PLANE('',#133875); +#133875 = AXIS2_PLACEMENT_3D('',#133876,#133877,#133878); +#133876 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.559568066692)); +#133877 = DIRECTION('',(0.,-0.950645364857,0.310279535704)); +#133878 = DIRECTION('',(-1.,0.,0.)); +#133879 = ADVANCED_FACE('',(#133880),#133891,.T.); +#133880 = FACE_BOUND('',#133881,.T.); +#133881 = EDGE_LOOP('',(#133882,#133883,#133884,#133890)); +#133882 = ORIENTED_EDGE('',*,*,#133868,.T.); +#133883 = ORIENTED_EDGE('',*,*,#132979,.F.); +#133884 = ORIENTED_EDGE('',*,*,#133885,.F.); +#133885 = EDGE_CURVE('',#130727,#132972,#133886,.T.); +#133886 = LINE('',#133887,#133888); +#133887 = CARTESIAN_POINT('',(8.5,-2.5669,-1.503397860622)); +#133888 = VECTOR('',#133889,1.); +#133889 = DIRECTION('',(1.,0.,0.)); +#133890 = ORIENTED_EDGE('',*,*,#130726,.T.); +#133891 = PLANE('',#133892); +#133892 = AXIS2_PLACEMENT_3D('',#133893,#133894,#133895); +#133893 = CARTESIAN_POINT('',(8.5,-2.5669,-1.503397860622)); +#133894 = DIRECTION('',(0.,-0.898138014367,0.439713664957)); +#133895 = DIRECTION('',(-1.,0.,0.)); +#133896 = ADVANCED_FACE('',(#133897),#133908,.T.); +#133897 = FACE_BOUND('',#133898,.T.); +#133898 = EDGE_LOOP('',(#133899,#133900,#133901,#133907)); +#133899 = ORIENTED_EDGE('',*,*,#133885,.T.); +#133900 = ORIENTED_EDGE('',*,*,#132971,.F.); +#133901 = ORIENTED_EDGE('',*,*,#133902,.F.); +#133902 = EDGE_CURVE('',#130735,#132964,#133903,.T.); +#133903 = LINE('',#133904,#133905); +#133904 = CARTESIAN_POINT('',(8.5,-2.52565,-1.46127020607)); +#133905 = VECTOR('',#133906,1.); +#133906 = DIRECTION('',(1.,0.,0.)); +#133907 = ORIENTED_EDGE('',*,*,#130734,.T.); +#133908 = PLANE('',#133909); +#133909 = AXIS2_PLACEMENT_3D('',#133910,#133911,#133912); +#133910 = CARTESIAN_POINT('',(8.5,-2.52565,-1.46127020607)); +#133911 = DIRECTION('',(0.,-0.714510384802,0.699624835187)); +#133912 = DIRECTION('',(-1.,0.,0.)); +#133913 = ADVANCED_FACE('',(#133914),#133925,.T.); +#133914 = FACE_BOUND('',#133915,.T.); +#133915 = EDGE_LOOP('',(#133916,#133917,#133918,#133924)); +#133916 = ORIENTED_EDGE('',*,*,#133902,.T.); +#133917 = ORIENTED_EDGE('',*,*,#132963,.F.); +#133918 = ORIENTED_EDGE('',*,*,#133919,.F.); +#133919 = EDGE_CURVE('',#130743,#132956,#133920,.T.); +#133920 = LINE('',#133921,#133922); +#133921 = CARTESIAN_POINT('',(8.5,-2.456900026226,-1.419142551517)); +#133922 = VECTOR('',#133923,1.); +#133923 = DIRECTION('',(1.,0.,0.)); +#133924 = ORIENTED_EDGE('',*,*,#130742,.T.); +#133925 = PLANE('',#133926); +#133926 = AXIS2_PLACEMENT_3D('',#133927,#133928,#133929); +#133927 = CARTESIAN_POINT('',(8.5,-2.456900026226,-1.419142551517)); +#133928 = DIRECTION('',(0.,-0.522477073493,0.85265333382)); +#133929 = DIRECTION('',(-1.,0.,0.)); +#133930 = ADVANCED_FACE('',(#133931),#133942,.T.); +#133931 = FACE_BOUND('',#133932,.T.); +#133932 = EDGE_LOOP('',(#133933,#133934,#133935,#133941)); +#133933 = ORIENTED_EDGE('',*,*,#133919,.T.); +#133934 = ORIENTED_EDGE('',*,*,#132955,.F.); +#133935 = ORIENTED_EDGE('',*,*,#133936,.F.); +#133936 = EDGE_CURVE('',#130751,#132948,#133937,.T.); +#133937 = LINE('',#133938,#133939); +#133938 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.4051)); +#133939 = VECTOR('',#133940,1.); +#133940 = DIRECTION('',(1.,0.,0.)); +#133941 = ORIENTED_EDGE('',*,*,#130750,.T.); +#133942 = PLANE('',#133943); +#133943 = AXIS2_PLACEMENT_3D('',#133944,#133945,#133946); +#133944 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.4051)); +#133945 = DIRECTION('',(0.,-0.167799328608,0.985821173093)); +#133946 = DIRECTION('',(-1.,0.,0.)); +#133947 = ADVANCED_FACE('',(#133948),#133959,.T.); +#133948 = FACE_BOUND('',#133949,.T.); +#133949 = EDGE_LOOP('',(#133950,#133951,#133952,#133958)); +#133950 = ORIENTED_EDGE('',*,*,#133936,.T.); +#133951 = ORIENTED_EDGE('',*,*,#132947,.F.); +#133952 = ORIENTED_EDGE('',*,*,#133953,.F.); +#133953 = EDGE_CURVE('',#130759,#132940,#133954,.T.); +#133954 = LINE('',#133955,#133956); +#133955 = CARTESIAN_POINT('',(8.5,-2.291900026226,-1.419142551517)); +#133956 = VECTOR('',#133957,1.); +#133957 = DIRECTION('',(1.,-2.220446049251E-14,0.)); +#133958 = ORIENTED_EDGE('',*,*,#130758,.T.); +#133959 = PLANE('',#133960); +#133960 = AXIS2_PLACEMENT_3D('',#133961,#133962,#133963); +#133961 = CARTESIAN_POINT('',(8.5,-2.291900026226,-1.419142551517)); +#133962 = DIRECTION('',(-0.,0.167799328608,0.985821173093)); +#133963 = DIRECTION('',(1.,0.,0.)); +#133964 = ADVANCED_FACE('',(#133965),#133976,.T.); +#133965 = FACE_BOUND('',#133966,.T.); +#133966 = EDGE_LOOP('',(#133967,#133968,#133969,#133975)); +#133967 = ORIENTED_EDGE('',*,*,#133953,.T.); +#133968 = ORIENTED_EDGE('',*,*,#132939,.F.); +#133969 = ORIENTED_EDGE('',*,*,#133970,.F.); +#133970 = EDGE_CURVE('',#130767,#132932,#133971,.T.); +#133971 = LINE('',#133972,#133973); +#133972 = CARTESIAN_POINT('',(8.5,-2.223149973774,-1.46127020607)); +#133973 = VECTOR('',#133974,1.); +#133974 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#133975 = ORIENTED_EDGE('',*,*,#130766,.T.); +#133976 = PLANE('',#133977); +#133977 = AXIS2_PLACEMENT_3D('',#133978,#133979,#133980); +#133978 = CARTESIAN_POINT('',(8.5,-2.223149973774,-1.46127020607)); +#133979 = DIRECTION('',(-0.,0.52247663879,0.852653600191)); +#133980 = DIRECTION('',(1.,0.,0.)); +#133981 = ADVANCED_FACE('',(#133982),#133993,.T.); +#133982 = FACE_BOUND('',#133983,.T.); +#133983 = EDGE_LOOP('',(#133984,#133985,#133986,#133992)); +#133984 = ORIENTED_EDGE('',*,*,#133970,.T.); +#133985 = ORIENTED_EDGE('',*,*,#132931,.F.); +#133986 = ORIENTED_EDGE('',*,*,#133987,.F.); +#133987 = EDGE_CURVE('',#130775,#132924,#133988,.T.); +#133988 = LINE('',#133989,#133990); +#133989 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.503397860622)); +#133990 = VECTOR('',#133991,1.); +#133991 = DIRECTION('',(1.,0.,0.)); +#133992 = ORIENTED_EDGE('',*,*,#130774,.T.); +#133993 = PLANE('',#133994); +#133994 = AXIS2_PLACEMENT_3D('',#133995,#133996,#133997); +#133995 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.503397860622)); +#133996 = DIRECTION('',(-0.,0.714510384802,0.699624835187)); +#133997 = DIRECTION('',(1.,0.,0.)); +#133998 = ADVANCED_FACE('',(#133999),#134010,.T.); +#133999 = FACE_BOUND('',#134000,.T.); +#134000 = EDGE_LOOP('',(#134001,#134002,#134003,#134009)); +#134001 = ORIENTED_EDGE('',*,*,#133987,.T.); +#134002 = ORIENTED_EDGE('',*,*,#132923,.F.); +#134003 = ORIENTED_EDGE('',*,*,#134004,.F.); +#134004 = EDGE_CURVE('',#130783,#132916,#134005,.T.); +#134005 = LINE('',#134006,#134007); +#134006 = CARTESIAN_POINT('',(8.5,-2.1544,-1.559568066692)); +#134007 = VECTOR('',#134008,1.); +#134008 = DIRECTION('',(1.,0.,0.)); +#134009 = ORIENTED_EDGE('',*,*,#130782,.T.); +#134010 = PLANE('',#134011); +#134011 = AXIS2_PLACEMENT_3D('',#134012,#134013,#134014); +#134012 = CARTESIAN_POINT('',(8.5,-2.1544,-1.559568066692)); +#134013 = DIRECTION('',(-0.,0.898138262779,0.43971315756)); +#134014 = DIRECTION('',(1.,0.,0.)); +#134015 = ADVANCED_FACE('',(#134016),#134027,.T.); +#134016 = FACE_BOUND('',#134017,.T.); +#134017 = EDGE_LOOP('',(#134018,#134019,#134020,#134026)); +#134018 = ORIENTED_EDGE('',*,*,#134004,.T.); +#134019 = ORIENTED_EDGE('',*,*,#132915,.F.); +#134020 = ORIENTED_EDGE('',*,*,#134021,.F.); +#134021 = EDGE_CURVE('',#130791,#132908,#134022,.T.); +#134022 = LINE('',#134023,#134024); +#134023 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.601695760584)); +#134024 = VECTOR('',#134025,1.); +#134025 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#134026 = ORIENTED_EDGE('',*,*,#130790,.T.); +#134027 = PLANE('',#134028); +#134028 = AXIS2_PLACEMENT_3D('',#134029,#134030,#134031); +#134029 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.601695760584)); +#134030 = DIRECTION('',(-0.,0.95064510301,0.310280337958)); +#134031 = DIRECTION('',(1.,0.,0.)); +#134032 = ADVANCED_FACE('',(#134033),#134044,.T.); +#134033 = FACE_BOUND('',#134034,.T.); +#134034 = EDGE_LOOP('',(#134035,#134036,#134037,#134043)); +#134035 = ORIENTED_EDGE('',*,*,#134021,.T.); +#134036 = ORIENTED_EDGE('',*,*,#132907,.F.); +#134037 = ORIENTED_EDGE('',*,*,#134038,.F.); +#134038 = EDGE_CURVE('',#130799,#132900,#134039,.T.); +#134039 = LINE('',#134040,#134041); +#134040 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.671908518171)); +#134041 = VECTOR('',#134042,1.); +#134042 = DIRECTION('',(1.,0.,0.)); +#134043 = ORIENTED_EDGE('',*,*,#130798,.T.); +#134044 = PLANE('',#134045); +#134045 = AXIS2_PLACEMENT_3D('',#134046,#134047,#134048); +#134046 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.671908518171)); +#134047 = DIRECTION('',(-0.,0.98135927276,0.192182147373)); +#134048 = DIRECTION('',(1.,0.,0.)); +#134049 = ADVANCED_FACE('',(#134050),#134061,.T.); +#134050 = FACE_BOUND('',#134051,.T.); +#134051 = EDGE_LOOP('',(#134052,#134053,#134054,#134060)); +#134052 = ORIENTED_EDGE('',*,*,#134038,.T.); +#134053 = ORIENTED_EDGE('',*,*,#132899,.F.); +#134054 = ORIENTED_EDGE('',*,*,#134055,.F.); +#134055 = EDGE_CURVE('',#130807,#132892,#134056,.T.); +#134056 = LINE('',#134057,#134058); +#134057 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.798291481829)); +#134058 = VECTOR('',#134059,1.); +#134059 = DIRECTION('',(1.,0.,0.)); +#134060 = ORIENTED_EDGE('',*,*,#130806,.T.); +#134061 = PLANE('',#134062); +#134062 = AXIS2_PLACEMENT_3D('',#134063,#134064,#134065); +#134063 = CARTESIAN_POINT('',(8.5,-2.126900026226,-1.798291481829)); +#134064 = DIRECTION('',(0.,1.,0.)); +#134065 = DIRECTION('',(0.,-0.,1.)); +#134066 = ADVANCED_FACE('',(#134067),#134078,.T.); +#134067 = FACE_BOUND('',#134068,.T.); +#134068 = EDGE_LOOP('',(#134069,#134070,#134071,#134077)); +#134069 = ORIENTED_EDGE('',*,*,#134055,.T.); +#134070 = ORIENTED_EDGE('',*,*,#132891,.F.); +#134071 = ORIENTED_EDGE('',*,*,#134072,.F.); +#134072 = EDGE_CURVE('',#130815,#132884,#134073,.T.); +#134073 = LINE('',#134074,#134075); +#134074 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.868504259086)); +#134075 = VECTOR('',#134076,1.); +#134076 = DIRECTION('',(1.,0.,0.)); +#134077 = ORIENTED_EDGE('',*,*,#130814,.T.); +#134078 = PLANE('',#134079); +#134079 = AXIS2_PLACEMENT_3D('',#134080,#134081,#134082); +#134080 = CARTESIAN_POINT('',(8.5,-2.140649973774,-1.868504259086)); +#134081 = DIRECTION('',(0.,0.981359282913,-0.192182095523)); +#134082 = DIRECTION('',(0.,0.192182095523,0.981359282913)); +#134083 = ADVANCED_FACE('',(#134084),#134095,.T.); +#134084 = FACE_BOUND('',#134085,.T.); +#134085 = EDGE_LOOP('',(#134086,#134087,#134088,#134094)); +#134086 = ORIENTED_EDGE('',*,*,#134072,.T.); +#134087 = ORIENTED_EDGE('',*,*,#132883,.F.); +#134088 = ORIENTED_EDGE('',*,*,#134089,.F.); +#134089 = EDGE_CURVE('',#130823,#132876,#134090,.T.); +#134090 = LINE('',#134091,#134092); +#134091 = CARTESIAN_POINT('',(8.5,-2.1544,-1.910631913638)); +#134092 = VECTOR('',#134093,1.); +#134093 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#134094 = ORIENTED_EDGE('',*,*,#130822,.T.); +#134095 = PLANE('',#134096); +#134096 = AXIS2_PLACEMENT_3D('',#134097,#134098,#134099); +#134097 = CARTESIAN_POINT('',(8.5,-2.1544,-1.910631913638)); +#134098 = DIRECTION('',(0.,0.950645017546,-0.310280599805)); +#134099 = DIRECTION('',(0.,0.310280599805,0.950645017546)); +#134100 = ADVANCED_FACE('',(#134101),#134112,.T.); +#134101 = FACE_BOUND('',#134102,.T.); +#134102 = EDGE_LOOP('',(#134103,#134104,#134105,#134111)); +#134103 = ORIENTED_EDGE('',*,*,#134089,.T.); +#134104 = ORIENTED_EDGE('',*,*,#132875,.F.); +#134105 = ORIENTED_EDGE('',*,*,#134106,.F.); +#134106 = EDGE_CURVE('',#130831,#132868,#134107,.T.); +#134107 = LINE('',#134108,#134109); +#134108 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.966802129543)); +#134109 = VECTOR('',#134110,1.); +#134110 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#134111 = ORIENTED_EDGE('',*,*,#130830,.T.); +#134112 = PLANE('',#134113); +#134113 = AXIS2_PLACEMENT_3D('',#134114,#134115,#134116); +#134114 = CARTESIAN_POINT('',(8.5,-2.181899973774,-1.966802129543)); +#134115 = DIRECTION('',(0.,0.898138293184,-0.439713095457)); +#134116 = DIRECTION('',(0.,0.439713095457,0.898138293184)); +#134117 = ADVANCED_FACE('',(#134118),#134129,.T.); +#134118 = FACE_BOUND('',#134119,.T.); +#134119 = EDGE_LOOP('',(#134120,#134121,#134122,#134128)); +#134120 = ORIENTED_EDGE('',*,*,#134106,.T.); +#134121 = ORIENTED_EDGE('',*,*,#132867,.F.); +#134122 = ORIENTED_EDGE('',*,*,#134123,.F.); +#134123 = EDGE_CURVE('',#130839,#132860,#134124,.T.); +#134124 = LINE('',#134125,#134126); +#134125 = CARTESIAN_POINT('',(8.5,-2.223149973774,-2.008929789013)); +#134126 = VECTOR('',#134127,1.); +#134127 = DIRECTION('',(1.,0.,0.)); +#134128 = ORIENTED_EDGE('',*,*,#130838,.T.); +#134129 = PLANE('',#134130); +#134130 = AXIS2_PLACEMENT_3D('',#134131,#134132,#134133); +#134131 = CARTESIAN_POINT('',(8.5,-2.223149973774,-2.008929789013)); +#134132 = DIRECTION('',(0.,0.714510425625,-0.699624793495)); +#134133 = DIRECTION('',(0.,0.699624793495,0.714510425625)); +#134134 = ADVANCED_FACE('',(#134135),#134146,.T.); +#134135 = FACE_BOUND('',#134136,.T.); +#134136 = EDGE_LOOP('',(#134137,#134138,#134139,#134145)); +#134137 = ORIENTED_EDGE('',*,*,#134123,.T.); +#134138 = ORIENTED_EDGE('',*,*,#132859,.F.); +#134139 = ORIENTED_EDGE('',*,*,#134140,.F.); +#134140 = EDGE_CURVE('',#130847,#132852,#134141,.T.); +#134141 = LINE('',#134142,#134143); +#134142 = CARTESIAN_POINT('',(8.5,-2.291900026226,-2.051057447253)); +#134143 = VECTOR('',#134144,1.); +#134144 = DIRECTION('',(1.,0.,0.)); +#134145 = ORIENTED_EDGE('',*,*,#130846,.T.); +#134146 = PLANE('',#134147); +#134147 = AXIS2_PLACEMENT_3D('',#134148,#134149,#134150); +#134148 = CARTESIAN_POINT('',(8.5,-2.291900026226,-2.051057447253)); +#134149 = DIRECTION('',(0.,0.522476672043,-0.852653579815)); +#134150 = DIRECTION('',(0.,0.852653579815,0.522476672043)); +#134151 = ADVANCED_FACE('',(#134152),#134163,.T.); +#134152 = FACE_BOUND('',#134153,.T.); +#134153 = EDGE_LOOP('',(#134154,#134155,#134156,#134162)); +#134154 = ORIENTED_EDGE('',*,*,#134140,.T.); +#134155 = ORIENTED_EDGE('',*,*,#132851,.F.); +#134156 = ORIENTED_EDGE('',*,*,#134157,.F.); +#134157 = EDGE_CURVE('',#130855,#132844,#134158,.T.); +#134158 = LINE('',#134159,#134160); +#134159 = CARTESIAN_POINT('',(8.5,-2.374400026226,-2.0651)); +#134160 = VECTOR('',#134161,1.); +#134161 = DIRECTION('',(1.,0.,0.)); +#134162 = ORIENTED_EDGE('',*,*,#130854,.T.); +#134163 = PLANE('',#134164); +#134164 = AXIS2_PLACEMENT_3D('',#134165,#134166,#134167); +#134165 = CARTESIAN_POINT('',(8.5,-2.374400026226,-2.0651)); +#134166 = DIRECTION('',(0.,0.167799342885,-0.985821170663)); +#134167 = DIRECTION('',(0.,0.985821170663,0.167799342885)); +#134168 = ADVANCED_FACE('',(#134169),#134180,.T.); +#134169 = FACE_BOUND('',#134170,.T.); +#134170 = EDGE_LOOP('',(#134171,#134172,#134173,#134179)); +#134171 = ORIENTED_EDGE('',*,*,#134157,.T.); +#134172 = ORIENTED_EDGE('',*,*,#132843,.F.); +#134173 = ORIENTED_EDGE('',*,*,#134174,.F.); +#134174 = EDGE_CURVE('',#130863,#132836,#134175,.T.); +#134175 = LINE('',#134176,#134177); +#134176 = CARTESIAN_POINT('',(8.5,-2.456900026226,-2.051057447253)); +#134177 = VECTOR('',#134178,1.); +#134178 = DIRECTION('',(1.,0.,0.)); +#134179 = ORIENTED_EDGE('',*,*,#130862,.T.); +#134180 = PLANE('',#134181); +#134181 = AXIS2_PLACEMENT_3D('',#134182,#134183,#134184); +#134182 = CARTESIAN_POINT('',(8.5,-2.456900026226,-2.051057447253)); +#134183 = DIRECTION('',(-0.,-0.167799342885,-0.985821170663)); +#134184 = DIRECTION('',(-1.,0.,0.)); +#134185 = ADVANCED_FACE('',(#134186),#134197,.T.); +#134186 = FACE_BOUND('',#134187,.T.); +#134187 = EDGE_LOOP('',(#134188,#134189,#134190,#134196)); +#134188 = ORIENTED_EDGE('',*,*,#134174,.T.); +#134189 = ORIENTED_EDGE('',*,*,#132835,.F.); +#134190 = ORIENTED_EDGE('',*,*,#134191,.F.); +#134191 = EDGE_CURVE('',#130871,#132828,#134192,.T.); +#134192 = LINE('',#134193,#134194); +#134193 = CARTESIAN_POINT('',(8.5,-2.52565,-2.008929789013)); +#134194 = VECTOR('',#134195,1.); +#134195 = DIRECTION('',(1.,0.,-2.220446049251E-14)); +#134196 = ORIENTED_EDGE('',*,*,#130870,.T.); +#134197 = PLANE('',#134198); +#134198 = AXIS2_PLACEMENT_3D('',#134199,#134200,#134201); +#134199 = CARTESIAN_POINT('',(8.5,-2.52565,-2.008929789013)); +#134200 = DIRECTION('',(-0.,-0.522477106747,-0.852653313443)); +#134201 = DIRECTION('',(-1.,0.,0.)); +#134202 = ADVANCED_FACE('',(#134203),#134214,.T.); +#134203 = FACE_BOUND('',#134204,.T.); +#134204 = EDGE_LOOP('',(#134205,#134206,#134207,#134213)); +#134205 = ORIENTED_EDGE('',*,*,#134191,.T.); +#134206 = ORIENTED_EDGE('',*,*,#132827,.F.); +#134207 = ORIENTED_EDGE('',*,*,#134208,.F.); +#134208 = EDGE_CURVE('',#130879,#132820,#134209,.T.); +#134209 = LINE('',#134210,#134211); +#134210 = CARTESIAN_POINT('',(8.5,-2.5669,-1.966802129543)); +#134211 = VECTOR('',#134212,1.); +#134212 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#134213 = ORIENTED_EDGE('',*,*,#130878,.T.); +#134214 = PLANE('',#134215); +#134215 = AXIS2_PLACEMENT_3D('',#134216,#134217,#134218); +#134216 = CARTESIAN_POINT('',(8.5,-2.5669,-1.966802129543)); +#134217 = DIRECTION('',(-0.,-0.714510425625,-0.699624793495)); +#134218 = DIRECTION('',(-1.,0.,0.)); +#134219 = ADVANCED_FACE('',(#134220),#134231,.T.); +#134220 = FACE_BOUND('',#134221,.T.); +#134221 = EDGE_LOOP('',(#134222,#134223,#134224,#134230)); +#134222 = ORIENTED_EDGE('',*,*,#134208,.T.); +#134223 = ORIENTED_EDGE('',*,*,#132819,.F.); +#134224 = ORIENTED_EDGE('',*,*,#134225,.F.); +#134225 = EDGE_CURVE('',#130887,#132812,#134226,.T.); +#134226 = LINE('',#134227,#134228); +#134227 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.910631913638)); +#134228 = VECTOR('',#134229,1.); +#134229 = DIRECTION('',(1.,-2.220446049251E-14,1.110223024625E-14)); +#134230 = ORIENTED_EDGE('',*,*,#130886,.T.); +#134231 = PLANE('',#134232); +#134232 = AXIS2_PLACEMENT_3D('',#134233,#134234,#134235); +#134233 = CARTESIAN_POINT('',(8.5,-2.594400013113,-1.910631913638)); +#134234 = DIRECTION('',(-0.,-0.898138044771,-0.439713602853)); +#134235 = DIRECTION('',(-1.,0.,0.)); +#134236 = ADVANCED_FACE('',(#134237),#134248,.T.); +#134237 = FACE_BOUND('',#134238,.T.); +#134238 = EDGE_LOOP('',(#134239,#134240,#134241,#134247)); +#134239 = ORIENTED_EDGE('',*,*,#134225,.T.); +#134240 = ORIENTED_EDGE('',*,*,#132811,.F.); +#134241 = ORIENTED_EDGE('',*,*,#134242,.F.); +#134242 = EDGE_CURVE('',#130895,#132804,#134243,.T.); +#134243 = LINE('',#134244,#134245); +#134244 = CARTESIAN_POINT('',(8.5,-2.60815,-1.868504259086)); +#134245 = VECTOR('',#134246,1.); +#134246 = DIRECTION('',(1.,0.,0.)); +#134247 = ORIENTED_EDGE('',*,*,#130894,.T.); +#134248 = PLANE('',#134249); +#134249 = AXIS2_PLACEMENT_3D('',#134250,#134251,#134252); +#134250 = CARTESIAN_POINT('',(8.5,-2.60815,-1.868504259086)); +#134251 = DIRECTION('',(-0.,-0.950645279393,-0.310279797551)); +#134252 = DIRECTION('',(-1.,0.,0.)); +#134253 = ADVANCED_FACE('',(#134254),#134260,.T.); +#134254 = FACE_BOUND('',#134255,.T.); +#134255 = EDGE_LOOP('',(#134256,#134257,#134258,#134259)); +#134256 = ORIENTED_EDGE('',*,*,#134242,.T.); +#134257 = ORIENTED_EDGE('',*,*,#132801,.F.); +#134258 = ORIENTED_EDGE('',*,*,#133827,.F.); +#134259 = ORIENTED_EDGE('',*,*,#130902,.T.); +#134260 = PLANE('',#134261); +#134261 = AXIS2_PLACEMENT_3D('',#134262,#134263,#134264); +#134262 = CARTESIAN_POINT('',(8.5,-2.621899986887,-1.798291481829)); +#134263 = DIRECTION('',(-0.,-0.981359179214,-0.192182625054)); +#134264 = DIRECTION('',(-1.,0.,0.)); +#134265 = ADVANCED_FACE('',(#134266),#134282,.T.); +#134266 = FACE_BOUND('',#134267,.T.); +#134267 = EDGE_LOOP('',(#134268,#134274,#134275,#134281)); +#134268 = ORIENTED_EDGE('',*,*,#134269,.T.); +#134269 = EDGE_CURVE('',#131223,#133012,#134270,.T.); +#134270 = LINE('',#134271,#134272); +#134271 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.601695760584)); +#134272 = VECTOR('',#134273,1.); +#134273 = DIRECTION('',(1.,0.,0.)); +#134274 = ORIENTED_EDGE('',*,*,#133149,.F.); +#134275 = ORIENTED_EDGE('',*,*,#134276,.F.); +#134276 = EDGE_CURVE('',#131095,#133142,#134277,.T.); +#134277 = LINE('',#134278,#134279); +#134278 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.685951069689)); +#134279 = VECTOR('',#134280,1.); +#134280 = DIRECTION('',(1.,0.,0.)); +#134281 = ORIENTED_EDGE('',*,*,#131230,.T.); +#134282 = PLANE('',#134283); +#134283 = AXIS2_PLACEMENT_3D('',#134284,#134285,#134286); +#134284 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.685951069689)); +#134285 = DIRECTION('',(0.,0.986944094789,-0.161063198037)); +#134286 = DIRECTION('',(0.,0.161063198037,0.986944094789)); +#134287 = ADVANCED_FACE('',(#134288),#134299,.T.); +#134288 = FACE_BOUND('',#134289,.T.); +#134289 = EDGE_LOOP('',(#134290,#134291,#134292,#134298)); +#134290 = ORIENTED_EDGE('',*,*,#134276,.T.); +#134291 = ORIENTED_EDGE('',*,*,#133141,.F.); +#134292 = ORIENTED_EDGE('',*,*,#134293,.F.); +#134293 = EDGE_CURVE('',#131093,#133134,#134294,.T.); +#134294 = LINE('',#134295,#134296); +#134295 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.784248930311)); +#134296 = VECTOR('',#134297,1.); +#134297 = DIRECTION('',(1.,0.,0.)); +#134298 = ORIENTED_EDGE('',*,*,#131092,.T.); +#134299 = PLANE('',#134300); +#134300 = AXIS2_PLACEMENT_3D('',#134301,#134302,#134303); +#134301 = CARTESIAN_POINT('',(8.5,-2.553149973774,-1.784248930311)); +#134302 = DIRECTION('',(0.,1.,0.)); +#134303 = DIRECTION('',(0.,-0.,1.)); +#134304 = ADVANCED_FACE('',(#134305),#134316,.T.); +#134305 = FACE_BOUND('',#134306,.T.); +#134306 = EDGE_LOOP('',(#134307,#134308,#134309,#134315)); +#134307 = ORIENTED_EDGE('',*,*,#134293,.T.); +#134308 = ORIENTED_EDGE('',*,*,#133133,.F.); +#134309 = ORIENTED_EDGE('',*,*,#134310,.F.); +#134310 = EDGE_CURVE('',#131103,#133126,#134311,.T.); +#134311 = LINE('',#134312,#134313); +#134312 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.868504259086)); +#134313 = VECTOR('',#134314,1.); +#134314 = DIRECTION('',(1.,0.,0.)); +#134315 = ORIENTED_EDGE('',*,*,#131102,.T.); +#134316 = PLANE('',#134317); +#134317 = AXIS2_PLACEMENT_3D('',#134318,#134319,#134320); +#134318 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.868504259086)); +#134319 = DIRECTION('',(-0.,0.986944100766,0.161063161412)); +#134320 = DIRECTION('',(1.,0.,0.)); +#134321 = ADVANCED_FACE('',(#134322),#134333,.T.); +#134322 = FACE_BOUND('',#134323,.T.); +#134323 = EDGE_LOOP('',(#134324,#134325,#134326,#134332)); +#134324 = ORIENTED_EDGE('',*,*,#134310,.T.); +#134325 = ORIENTED_EDGE('',*,*,#133125,.F.); +#134326 = ORIENTED_EDGE('',*,*,#134327,.F.); +#134327 = EDGE_CURVE('',#131111,#133118,#134328,.T.); +#134328 = LINE('',#134329,#134330); +#134329 = CARTESIAN_POINT('',(8.5,-2.4844,-1.952759578025)); +#134330 = VECTOR('',#134331,1.); +#134331 = DIRECTION('',(1.,0.,0.)); +#134332 = ORIENTED_EDGE('',*,*,#131110,.T.); +#134333 = PLANE('',#134334); +#134334 = AXIS2_PLACEMENT_3D('',#134335,#134336,#134337); +#134335 = CARTESIAN_POINT('',(8.5,-2.4844,-1.952759578025)); +#134336 = DIRECTION('',(-0.,0.83737903044,0.546622684656)); +#134337 = DIRECTION('',(1.,0.,0.)); +#134338 = ADVANCED_FACE('',(#134339),#134350,.T.); +#134339 = FACE_BOUND('',#134340,.T.); +#134340 = EDGE_LOOP('',(#134341,#134342,#134343,#134349)); +#134341 = ORIENTED_EDGE('',*,*,#134327,.T.); +#134342 = ORIENTED_EDGE('',*,*,#133117,.F.); +#134343 = ORIENTED_EDGE('',*,*,#134344,.F.); +#134344 = EDGE_CURVE('',#131119,#133110,#134345,.T.); +#134345 = LINE('',#134346,#134347); +#134346 = CARTESIAN_POINT('',(8.5,-2.44315,-1.98084468106)); +#134347 = VECTOR('',#134348,1.); +#134348 = DIRECTION('',(1.,0.,0.)); +#134349 = ORIENTED_EDGE('',*,*,#131118,.T.); +#134350 = PLANE('',#134351); +#134351 = AXIS2_PLACEMENT_3D('',#134352,#134353,#134354); +#134352 = CARTESIAN_POINT('',(8.5,-2.44315,-1.98084468106)); +#134353 = DIRECTION('',(-0.,0.562790931242,0.8265992788)); +#134354 = DIRECTION('',(1.,0.,0.)); +#134355 = ADVANCED_FACE('',(#134356),#134367,.T.); +#134356 = FACE_BOUND('',#134357,.T.); +#134357 = EDGE_LOOP('',(#134358,#134359,#134360,#134366)); +#134358 = ORIENTED_EDGE('',*,*,#134344,.T.); +#134359 = ORIENTED_EDGE('',*,*,#133109,.F.); +#134360 = ORIENTED_EDGE('',*,*,#134361,.F.); +#134361 = EDGE_CURVE('',#131127,#133102,#134362,.T.); +#134362 = LINE('',#134363,#134364); +#134363 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.994887232578)); +#134364 = VECTOR('',#134365,1.); +#134365 = DIRECTION('',(1.,0.,0.)); +#134366 = ORIENTED_EDGE('',*,*,#131126,.T.); +#134367 = PLANE('',#134368); +#134368 = AXIS2_PLACEMENT_3D('',#134369,#134370,#134371); +#134369 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.994887232578)); +#134370 = DIRECTION('',(-0.,0.200123428343,0.97977069431)); +#134371 = DIRECTION('',(1.,0.,0.)); +#134372 = ADVANCED_FACE('',(#134373),#134384,.T.); +#134373 = FACE_BOUND('',#134374,.T.); +#134374 = EDGE_LOOP('',(#134375,#134376,#134377,#134383)); +#134375 = ORIENTED_EDGE('',*,*,#134361,.T.); +#134376 = ORIENTED_EDGE('',*,*,#133101,.F.); +#134377 = ORIENTED_EDGE('',*,*,#134378,.F.); +#134378 = EDGE_CURVE('',#131135,#133094,#134379,.T.); +#134379 = LINE('',#134380,#134381); +#134380 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.98084468106)); +#134381 = VECTOR('',#134382,1.); +#134382 = DIRECTION('',(1.,0.,0.)); +#134383 = ORIENTED_EDGE('',*,*,#131134,.T.); +#134384 = PLANE('',#134385); +#134385 = AXIS2_PLACEMENT_3D('',#134386,#134387,#134388); +#134386 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.98084468106)); +#134387 = DIRECTION('',(0.,-0.200123208493,0.979770739215)); +#134388 = DIRECTION('',(-1.,0.,0.)); +#134389 = ADVANCED_FACE('',(#134390),#134401,.T.); +#134390 = FACE_BOUND('',#134391,.T.); +#134391 = EDGE_LOOP('',(#134392,#134393,#134394,#134400)); +#134392 = ORIENTED_EDGE('',*,*,#134378,.T.); +#134393 = ORIENTED_EDGE('',*,*,#133093,.F.); +#134394 = ORIENTED_EDGE('',*,*,#134395,.F.); +#134395 = EDGE_CURVE('',#131143,#133086,#134396,.T.); +#134396 = LINE('',#134397,#134398); +#134397 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.952759578025)); +#134398 = VECTOR('',#134399,1.); +#134399 = DIRECTION('',(1.,0.,0.)); +#134400 = ORIENTED_EDGE('',*,*,#131142,.T.); +#134401 = PLANE('',#134402); +#134402 = AXIS2_PLACEMENT_3D('',#134403,#134404,#134405); +#134403 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.952759578025)); +#134404 = DIRECTION('',(0.,-0.562790931242,0.8265992788)); +#134405 = DIRECTION('',(-1.,0.,0.)); +#134406 = ADVANCED_FACE('',(#134407),#134418,.T.); +#134407 = FACE_BOUND('',#134408,.T.); +#134408 = EDGE_LOOP('',(#134409,#134410,#134411,#134417)); +#134409 = ORIENTED_EDGE('',*,*,#134395,.T.); +#134410 = ORIENTED_EDGE('',*,*,#133085,.F.); +#134411 = ORIENTED_EDGE('',*,*,#134412,.F.); +#134412 = EDGE_CURVE('',#131151,#133078,#134413,.T.); +#134413 = LINE('',#134414,#134415); +#134414 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.868504259086)); +#134415 = VECTOR('',#134416,1.); +#134416 = DIRECTION('',(1.,0.,0.)); +#134417 = ORIENTED_EDGE('',*,*,#131150,.T.); +#134418 = PLANE('',#134419); +#134419 = AXIS2_PLACEMENT_3D('',#134420,#134421,#134422); +#134420 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.868504259086)); +#134421 = DIRECTION('',(0.,-0.837379388362,0.546622136349)); +#134422 = DIRECTION('',(-1.,0.,0.)); +#134423 = ADVANCED_FACE('',(#134424),#134435,.T.); +#134424 = FACE_BOUND('',#134425,.T.); +#134425 = EDGE_LOOP('',(#134426,#134427,#134428,#134434)); +#134426 = ORIENTED_EDGE('',*,*,#134412,.T.); +#134427 = ORIENTED_EDGE('',*,*,#133077,.F.); +#134428 = ORIENTED_EDGE('',*,*,#134429,.F.); +#134429 = EDGE_CURVE('',#131159,#133070,#134430,.T.); +#134430 = LINE('',#134431,#134432); +#134431 = CARTESIAN_POINT('',(8.5,-2.19565,-1.784248930311)); +#134432 = VECTOR('',#134433,1.); +#134433 = DIRECTION('',(1.,0.,0.)); +#134434 = ORIENTED_EDGE('',*,*,#131158,.T.); +#134435 = PLANE('',#134436); +#134436 = AXIS2_PLACEMENT_3D('',#134437,#134438,#134439); +#134437 = CARTESIAN_POINT('',(8.5,-2.19565,-1.784248930311)); +#134438 = DIRECTION('',(0.,-0.986943954265,0.161064059119)); +#134439 = DIRECTION('',(-1.,0.,0.)); +#134440 = ADVANCED_FACE('',(#134441),#134452,.T.); +#134441 = FACE_BOUND('',#134442,.T.); +#134442 = EDGE_LOOP('',(#134443,#134444,#134445,#134451)); +#134443 = ORIENTED_EDGE('',*,*,#134429,.T.); +#134444 = ORIENTED_EDGE('',*,*,#133069,.F.); +#134445 = ORIENTED_EDGE('',*,*,#134446,.F.); +#134446 = EDGE_CURVE('',#131167,#133062,#134447,.T.); +#134447 = LINE('',#134448,#134449); +#134448 = CARTESIAN_POINT('',(8.5,-2.19565,-1.685951069689)); +#134449 = VECTOR('',#134450,1.); +#134450 = DIRECTION('',(1.,0.,0.)); +#134451 = ORIENTED_EDGE('',*,*,#131166,.T.); +#134452 = PLANE('',#134453); +#134453 = AXIS2_PLACEMENT_3D('',#134454,#134455,#134456); +#134454 = CARTESIAN_POINT('',(8.5,-2.19565,-1.685951069689)); +#134455 = DIRECTION('',(0.,-1.,0.)); +#134456 = DIRECTION('',(1.,0.,0.)); +#134457 = ADVANCED_FACE('',(#134458),#134469,.T.); +#134458 = FACE_BOUND('',#134459,.T.); +#134459 = EDGE_LOOP('',(#134460,#134461,#134462,#134468)); +#134460 = ORIENTED_EDGE('',*,*,#134446,.T.); +#134461 = ORIENTED_EDGE('',*,*,#133061,.F.); +#134462 = ORIENTED_EDGE('',*,*,#134463,.F.); +#134463 = EDGE_CURVE('',#131175,#133054,#134464,.T.); +#134464 = LINE('',#134465,#134466); +#134465 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.601695760584)); +#134466 = VECTOR('',#134467,1.); +#134467 = DIRECTION('',(1.,0.,0.)); +#134468 = ORIENTED_EDGE('',*,*,#131174,.T.); +#134469 = PLANE('',#134470); +#134470 = AXIS2_PLACEMENT_3D('',#134471,#134472,#134473); +#134471 = CARTESIAN_POINT('',(8.5,-2.209400026226,-1.601695760584)); +#134472 = DIRECTION('',(-0.,-0.986943948288,-0.161064095744)); +#134473 = DIRECTION('',(-1.,0.,0.)); +#134474 = ADVANCED_FACE('',(#134475),#134486,.T.); +#134475 = FACE_BOUND('',#134476,.T.); +#134476 = EDGE_LOOP('',(#134477,#134478,#134479,#134485)); +#134477 = ORIENTED_EDGE('',*,*,#134463,.T.); +#134478 = ORIENTED_EDGE('',*,*,#133053,.F.); +#134479 = ORIENTED_EDGE('',*,*,#134480,.F.); +#134480 = EDGE_CURVE('',#131183,#133046,#134481,.T.); +#134481 = LINE('',#134482,#134483); +#134482 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.51744041214)); +#134483 = VECTOR('',#134484,1.); +#134484 = DIRECTION('',(1.,0.,0.)); +#134485 = ORIENTED_EDGE('',*,*,#131182,.T.); +#134486 = PLANE('',#134487); +#134487 = AXIS2_PLACEMENT_3D('',#134488,#134489,#134490); +#134488 = CARTESIAN_POINT('',(8.5,-2.264399973774,-1.51744041214)); +#134489 = DIRECTION('',(-0.,-0.837379475978,-0.546622002129)); +#134490 = DIRECTION('',(-1.,0.,0.)); +#134491 = ADVANCED_FACE('',(#134492),#134503,.T.); +#134492 = FACE_BOUND('',#134493,.T.); +#134493 = EDGE_LOOP('',(#134494,#134495,#134496,#134502)); +#134494 = ORIENTED_EDGE('',*,*,#134480,.T.); +#134495 = ORIENTED_EDGE('',*,*,#133045,.F.); +#134496 = ORIENTED_EDGE('',*,*,#134497,.F.); +#134497 = EDGE_CURVE('',#131191,#133038,#134498,.T.); +#134498 = LINE('',#134499,#134500); +#134499 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.489355309105)); +#134500 = VECTOR('',#134501,1.); +#134501 = DIRECTION('',(1.,0.,0.)); +#134502 = ORIENTED_EDGE('',*,*,#131190,.T.); +#134503 = PLANE('',#134504); +#134504 = AXIS2_PLACEMENT_3D('',#134505,#134506,#134507); +#134505 = CARTESIAN_POINT('',(8.5,-2.305649973774,-1.489355309105)); +#134506 = DIRECTION('',(-0.,-0.562790931242,-0.8265992788)); +#134507 = DIRECTION('',(-1.,0.,0.)); +#134508 = ADVANCED_FACE('',(#134509),#134520,.T.); +#134509 = FACE_BOUND('',#134510,.T.); +#134510 = EDGE_LOOP('',(#134511,#134512,#134513,#134519)); +#134511 = ORIENTED_EDGE('',*,*,#134497,.T.); +#134512 = ORIENTED_EDGE('',*,*,#133037,.F.); +#134513 = ORIENTED_EDGE('',*,*,#134514,.F.); +#134514 = EDGE_CURVE('',#131199,#133030,#134515,.T.); +#134515 = LINE('',#134516,#134517); +#134516 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.475312757587)); +#134517 = VECTOR('',#134518,1.); +#134518 = DIRECTION('',(1.,0.,0.)); +#134519 = ORIENTED_EDGE('',*,*,#131198,.T.); +#134520 = PLANE('',#134521); +#134521 = AXIS2_PLACEMENT_3D('',#134522,#134523,#134524); +#134522 = CARTESIAN_POINT('',(8.5,-2.374400026226,-1.475312757587)); +#134523 = DIRECTION('',(-0.,-0.200123208493,-0.979770739215)); +#134524 = DIRECTION('',(-1.,0.,0.)); +#134525 = ADVANCED_FACE('',(#134526),#134537,.T.); +#134526 = FACE_BOUND('',#134527,.T.); +#134527 = EDGE_LOOP('',(#134528,#134529,#134530,#134536)); +#134528 = ORIENTED_EDGE('',*,*,#134514,.T.); +#134529 = ORIENTED_EDGE('',*,*,#133029,.F.); +#134530 = ORIENTED_EDGE('',*,*,#134531,.F.); +#134531 = EDGE_CURVE('',#131207,#133022,#134532,.T.); +#134532 = LINE('',#134533,#134534); +#134533 = CARTESIAN_POINT('',(8.5,-2.44315,-1.489355309105)); +#134534 = VECTOR('',#134535,1.); +#134535 = DIRECTION('',(1.,0.,0.)); +#134536 = ORIENTED_EDGE('',*,*,#131206,.T.); +#134537 = PLANE('',#134538); +#134538 = AXIS2_PLACEMENT_3D('',#134539,#134540,#134541); +#134539 = CARTESIAN_POINT('',(8.5,-2.44315,-1.489355309105)); +#134540 = DIRECTION('',(0.,0.200123428343,-0.97977069431)); +#134541 = DIRECTION('',(0.,0.97977069431,0.200123428343)); +#134542 = ADVANCED_FACE('',(#134543),#134554,.T.); +#134543 = FACE_BOUND('',#134544,.T.); +#134544 = EDGE_LOOP('',(#134545,#134546,#134547,#134553)); +#134545 = ORIENTED_EDGE('',*,*,#134531,.T.); +#134546 = ORIENTED_EDGE('',*,*,#133021,.F.); +#134547 = ORIENTED_EDGE('',*,*,#134548,.F.); +#134548 = EDGE_CURVE('',#131215,#133014,#134549,.T.); +#134549 = LINE('',#134550,#134551); +#134550 = CARTESIAN_POINT('',(8.5,-2.4844,-1.51744041214)); +#134551 = VECTOR('',#134552,1.); +#134552 = DIRECTION('',(1.,0.,0.)); +#134553 = ORIENTED_EDGE('',*,*,#131214,.T.); +#134554 = PLANE('',#134555); +#134555 = AXIS2_PLACEMENT_3D('',#134556,#134557,#134558); +#134556 = CARTESIAN_POINT('',(8.5,-2.4844,-1.51744041214)); +#134557 = DIRECTION('',(0.,0.562790931242,-0.8265992788)); +#134558 = DIRECTION('',(0.,0.8265992788,0.562790931242)); +#134559 = ADVANCED_FACE('',(#134560),#134566,.T.); +#134560 = FACE_BOUND('',#134561,.T.); +#134561 = EDGE_LOOP('',(#134562,#134563,#134564,#134565)); +#134562 = ORIENTED_EDGE('',*,*,#134548,.T.); +#134563 = ORIENTED_EDGE('',*,*,#133011,.F.); +#134564 = ORIENTED_EDGE('',*,*,#134269,.F.); +#134565 = ORIENTED_EDGE('',*,*,#131222,.T.); +#134566 = PLANE('',#134567); +#134567 = AXIS2_PLACEMENT_3D('',#134568,#134569,#134570); +#134568 = CARTESIAN_POINT('',(8.5,-2.539400026226,-1.601695760584)); +#134569 = DIRECTION('',(0.,0.837379118056,-0.546622550435)); +#134570 = DIRECTION('',(0.,0.546622550435,0.837379118056)); +#134571 = ADVANCED_FACE('',(#134572),#134588,.T.); +#134572 = FACE_BOUND('',#134573,.T.); +#134573 = EDGE_LOOP('',(#134574,#134580,#134581,#134587)); +#134574 = ORIENTED_EDGE('',*,*,#134575,.T.); +#134575 = EDGE_CURVE('',#130242,#133164,#134576,.T.); +#134576 = LINE('',#134577,#134578); +#134577 = CARTESIAN_POINT('',(8.5,2.7948,-1.685951066113)); +#134578 = VECTOR('',#134579,1.); +#134579 = DIRECTION('',(1.,0.,0.)); +#134580 = ORIENTED_EDGE('',*,*,#133309,.F.); +#134581 = ORIENTED_EDGE('',*,*,#134582,.F.); +#134582 = EDGE_CURVE('',#130106,#133302,#134583,.T.); +#134583 = LINE('',#134584,#134585); +#134584 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.698717022038)); +#134585 = VECTOR('',#134586,1.); +#134586 = DIRECTION('',(1.,0.,0.)); +#134587 = ORIENTED_EDGE('',*,*,#130249,.T.); +#134588 = PLANE('',#134589); +#134589 = AXIS2_PLACEMENT_3D('',#134590,#134591,#134592); +#134590 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.698717022038)); +#134591 = DIRECTION('',(0.,0.454776941543,-0.890605374698)); +#134592 = DIRECTION('',(0.,0.890605374698,0.454776941543)); +#134593 = ADVANCED_FACE('',(#134594),#134605,.T.); +#134594 = FACE_BOUND('',#134595,.T.); +#134595 = EDGE_LOOP('',(#134596,#134597,#134598,#134604)); +#134596 = ORIENTED_EDGE('',*,*,#134582,.T.); +#134597 = ORIENTED_EDGE('',*,*,#133301,.F.); +#134598 = ORIENTED_EDGE('',*,*,#134599,.F.); +#134599 = EDGE_CURVE('',#130104,#133294,#134600,.T.); +#134600 = LINE('',#134601,#134602); +#134601 = CARTESIAN_POINT('',(8.5,2.7948,-1.711482977962)); +#134602 = VECTOR('',#134603,1.); +#134603 = DIRECTION('',(1.,0.,0.)); +#134604 = ORIENTED_EDGE('',*,*,#130103,.T.); +#134605 = PLANE('',#134606); +#134606 = AXIS2_PLACEMENT_3D('',#134607,#134608,#134609); +#134607 = CARTESIAN_POINT('',(8.5,2.7948,-1.711482977962)); +#134608 = DIRECTION('',(-0.,0.454776941543,0.890605374698)); +#134609 = DIRECTION('',(1.,0.,0.)); +#134610 = ADVANCED_FACE('',(#134611),#134622,.T.); +#134611 = FACE_BOUND('',#134612,.T.); +#134612 = EDGE_LOOP('',(#134613,#134614,#134615,#134621)); +#134613 = ORIENTED_EDGE('',*,*,#134599,.T.); +#134614 = ORIENTED_EDGE('',*,*,#133293,.F.); +#134615 = ORIENTED_EDGE('',*,*,#134616,.F.); +#134616 = EDGE_CURVE('',#130114,#133286,#134617,.T.); +#134617 = LINE('',#134618,#134619); +#134618 = CARTESIAN_POINT('',(8.5,2.8323,-1.762546801662)); +#134619 = VECTOR('',#134620,1.); +#134620 = DIRECTION('',(1.,0.,-2.220446049251E-14)); +#134621 = ORIENTED_EDGE('',*,*,#130113,.T.); +#134622 = PLANE('',#134623); +#134623 = AXIS2_PLACEMENT_3D('',#134624,#134625,#134626); +#134624 = CARTESIAN_POINT('',(8.5,2.8323,-1.762546801662)); +#134625 = DIRECTION('',(-0.,0.806004395831,0.59190954875)); +#134626 = DIRECTION('',(1.,0.,0.)); +#134627 = ADVANCED_FACE('',(#134628),#134639,.T.); +#134628 = FACE_BOUND('',#134629,.T.); +#134629 = EDGE_LOOP('',(#134630,#134631,#134632,#134638)); +#134630 = ORIENTED_EDGE('',*,*,#134616,.T.); +#134631 = ORIENTED_EDGE('',*,*,#133285,.F.); +#134632 = ORIENTED_EDGE('',*,*,#134633,.F.); +#134633 = EDGE_CURVE('',#130122,#133278,#134634,.T.); +#134634 = LINE('',#134635,#134636); +#134635 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.800844687319)); +#134636 = VECTOR('',#134637,1.); +#134637 = DIRECTION('',(1.,0.,-1.110223024625E-14)); +#134638 = ORIENTED_EDGE('',*,*,#130121,.T.); +#134639 = PLANE('',#134640); +#134640 = AXIS2_PLACEMENT_3D('',#134641,#134642,#134643); +#134641 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.800844687319)); +#134642 = DIRECTION('',(-0.,0.950645322125,0.310279666627)); +#134643 = DIRECTION('',(1.,0.,0.)); +#134644 = ADVANCED_FACE('',(#134645),#134656,.T.); +#134645 = FACE_BOUND('',#134646,.T.); +#134646 = EDGE_LOOP('',(#134647,#134648,#134649,#134655)); +#134647 = ORIENTED_EDGE('',*,*,#134633,.T.); +#134648 = ORIENTED_EDGE('',*,*,#133277,.F.); +#134649 = ORIENTED_EDGE('',*,*,#134650,.F.); +#134650 = EDGE_CURVE('',#130130,#133270,#134651,.T.); +#134651 = LINE('',#134652,#134653); +#134652 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.864674466944)); +#134653 = VECTOR('',#134654,1.); +#134654 = DIRECTION('',(1.,0.,0.)); +#134655 = ORIENTED_EDGE('',*,*,#130129,.T.); +#134656 = PLANE('',#134657); +#134657 = AXIS2_PLACEMENT_3D('',#134658,#134659,#134660); +#134658 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.864674466944)); +#134659 = DIRECTION('',(0.,1.,0.)); +#134660 = DIRECTION('',(0.,-0.,1.)); +#134661 = ADVANCED_FACE('',(#134662),#134673,.T.); +#134662 = FACE_BOUND('',#134663,.T.); +#134663 = EDGE_LOOP('',(#134664,#134665,#134666,#134672)); +#134664 = ORIENTED_EDGE('',*,*,#134650,.T.); +#134665 = ORIENTED_EDGE('',*,*,#133269,.F.); +#134666 = ORIENTED_EDGE('',*,*,#134667,.F.); +#134667 = EDGE_CURVE('',#130138,#133262,#134668,.T.); +#134668 = LINE('',#134669,#134670); +#134669 = CARTESIAN_POINT('',(8.5,2.8323,-1.902972343659)); +#134670 = VECTOR('',#134671,1.); +#134671 = DIRECTION('',(1.,0.,0.)); +#134672 = ORIENTED_EDGE('',*,*,#130137,.T.); +#134673 = PLANE('',#134674); +#134674 = AXIS2_PLACEMENT_3D('',#134675,#134676,#134677); +#134675 = CARTESIAN_POINT('',(8.5,2.8323,-1.902972343659)); +#134676 = DIRECTION('',(0.,0.950645300759,-0.310279732089)); +#134677 = DIRECTION('',(0.,0.310279732089,0.950645300759)); +#134678 = ADVANCED_FACE('',(#134679),#134690,.T.); +#134679 = FACE_BOUND('',#134680,.T.); +#134680 = EDGE_LOOP('',(#134681,#134682,#134683,#134689)); +#134681 = ORIENTED_EDGE('',*,*,#134667,.T.); +#134682 = ORIENTED_EDGE('',*,*,#133261,.F.); +#134683 = ORIENTED_EDGE('',*,*,#134684,.F.); +#134684 = EDGE_CURVE('',#130146,#133254,#134685,.T.); +#134685 = LINE('',#134686,#134687); +#134686 = CARTESIAN_POINT('',(8.5,2.7948,-1.95403617183)); +#134687 = VECTOR('',#134688,1.); +#134688 = DIRECTION('',(1.,0.,0.)); +#134689 = ORIENTED_EDGE('',*,*,#130145,.T.); +#134690 = PLANE('',#134691); +#134691 = AXIS2_PLACEMENT_3D('',#134692,#134693,#134694); +#134692 = CARTESIAN_POINT('',(8.5,2.7948,-1.95403617183)); +#134693 = DIRECTION('',(0.,0.806004420553,-0.591909515086)); +#134694 = DIRECTION('',(0.,0.591909515086,0.806004420553)); +#134695 = ADVANCED_FACE('',(#134696),#134707,.T.); +#134696 = FACE_BOUND('',#134697,.T.); +#134697 = EDGE_LOOP('',(#134698,#134699,#134700,#134706)); +#134698 = ORIENTED_EDGE('',*,*,#134684,.T.); +#134699 = ORIENTED_EDGE('',*,*,#133253,.F.); +#134700 = ORIENTED_EDGE('',*,*,#134701,.F.); +#134701 = EDGE_CURVE('',#130154,#133246,#134702,.T.); +#134702 = LINE('',#134703,#134704); +#134703 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.992334042957)); +#134704 = VECTOR('',#134705,1.); +#134705 = DIRECTION('',(1.,2.220446049251E-14,0.)); +#134706 = ORIENTED_EDGE('',*,*,#130153,.T.); +#134707 = PLANE('',#134708); +#134708 = AXIS2_PLACEMENT_3D('',#134709,#134710,#134711); +#134709 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.992334042957)); +#134710 = DIRECTION('',(0.,0.608076957024,-0.793878085311)); +#134711 = DIRECTION('',(0.,0.793878085311,0.608076957024)); +#134712 = ADVANCED_FACE('',(#134713),#134724,.T.); +#134713 = FACE_BOUND('',#134714,.T.); +#134714 = EDGE_LOOP('',(#134715,#134716,#134717,#134723)); +#134715 = ORIENTED_EDGE('',*,*,#134701,.T.); +#134716 = ORIENTED_EDGE('',*,*,#133245,.F.); +#134717 = ORIENTED_EDGE('',*,*,#134718,.F.); +#134718 = EDGE_CURVE('',#130162,#133238,#134719,.T.); +#134719 = LINE('',#134720,#134721); +#134720 = CARTESIAN_POINT('',(8.5,2.6823,-2.0051)); +#134721 = VECTOR('',#134722,1.); +#134722 = DIRECTION('',(1.,0.,0.)); +#134723 = ORIENTED_EDGE('',*,*,#130161,.T.); +#134724 = PLANE('',#134725); +#134725 = AXIS2_PLACEMENT_3D('',#134726,#134727,#134728); +#134726 = CARTESIAN_POINT('',(8.5,2.6823,-2.0051)); +#134727 = DIRECTION('',(0.,0.200123335236,-0.979770713327)); +#134728 = DIRECTION('',(0.,0.979770713327,0.200123335236)); +#134729 = ADVANCED_FACE('',(#134730),#134741,.T.); +#134730 = FACE_BOUND('',#134731,.T.); +#134731 = EDGE_LOOP('',(#134732,#134733,#134734,#134740)); +#134732 = ORIENTED_EDGE('',*,*,#134718,.T.); +#134733 = ORIENTED_EDGE('',*,*,#133237,.F.); +#134734 = ORIENTED_EDGE('',*,*,#134735,.F.); +#134735 = EDGE_CURVE('',#130170,#133230,#134736,.T.); +#134736 = LINE('',#134737,#134738); +#134737 = CARTESIAN_POINT('',(8.5,2.3823,-2.0051)); +#134738 = VECTOR('',#134739,1.); +#134739 = DIRECTION('',(1.,0.,0.)); +#134740 = ORIENTED_EDGE('',*,*,#130169,.T.); +#134741 = PLANE('',#134742); +#134742 = AXIS2_PLACEMENT_3D('',#134743,#134744,#134745); +#134743 = CARTESIAN_POINT('',(8.5,2.3823,-2.0051)); +#134744 = DIRECTION('',(0.,0.,-1.)); +#134745 = DIRECTION('',(-1.,0.,0.)); +#134746 = ADVANCED_FACE('',(#134747),#134758,.T.); +#134747 = FACE_BOUND('',#134748,.T.); +#134748 = EDGE_LOOP('',(#134749,#134750,#134751,#134757)); +#134749 = ORIENTED_EDGE('',*,*,#134735,.T.); +#134750 = ORIENTED_EDGE('',*,*,#133229,.F.); +#134751 = ORIENTED_EDGE('',*,*,#134752,.F.); +#134752 = EDGE_CURVE('',#130178,#133222,#134753,.T.); +#134753 = LINE('',#134754,#134755); +#134754 = CARTESIAN_POINT('',(8.5,2.3823,-1.4051)); +#134755 = VECTOR('',#134756,1.); +#134756 = DIRECTION('',(1.,0.,0.)); +#134757 = ORIENTED_EDGE('',*,*,#130177,.T.); +#134758 = PLANE('',#134759); +#134759 = AXIS2_PLACEMENT_3D('',#134760,#134761,#134762); +#134760 = CARTESIAN_POINT('',(8.5,2.3823,-1.4051)); +#134761 = DIRECTION('',(0.,-1.,0.)); +#134762 = DIRECTION('',(1.,0.,0.)); +#134763 = ADVANCED_FACE('',(#134764),#134775,.T.); +#134764 = FACE_BOUND('',#134765,.T.); +#134765 = EDGE_LOOP('',(#134766,#134767,#134768,#134774)); +#134766 = ORIENTED_EDGE('',*,*,#134752,.T.); +#134767 = ORIENTED_EDGE('',*,*,#133221,.F.); +#134768 = ORIENTED_EDGE('',*,*,#134769,.F.); +#134769 = EDGE_CURVE('',#130186,#133214,#134770,.T.); +#134770 = LINE('',#134771,#134772); +#134771 = CARTESIAN_POINT('',(8.5,2.6823,-1.4051)); +#134772 = VECTOR('',#134773,1.); +#134773 = DIRECTION('',(1.,0.,0.)); +#134774 = ORIENTED_EDGE('',*,*,#130185,.T.); +#134775 = PLANE('',#134776); +#134776 = AXIS2_PLACEMENT_3D('',#134777,#134778,#134779); +#134777 = CARTESIAN_POINT('',(8.5,2.6823,-1.4051)); +#134778 = DIRECTION('',(0.,0.,1.)); +#134779 = DIRECTION('',(0.,-1.,0.)); +#134780 = ADVANCED_FACE('',(#134781),#134792,.T.); +#134781 = FACE_BOUND('',#134782,.T.); +#134782 = EDGE_LOOP('',(#134783,#134784,#134785,#134791)); +#134783 = ORIENTED_EDGE('',*,*,#134769,.T.); +#134784 = ORIENTED_EDGE('',*,*,#133213,.F.); +#134785 = ORIENTED_EDGE('',*,*,#134786,.F.); +#134786 = EDGE_CURVE('',#130194,#133206,#134787,.T.); +#134787 = LINE('',#134788,#134789); +#134788 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.417865955925)); +#134789 = VECTOR('',#134790,1.); +#134790 = DIRECTION('',(1.,0.,0.)); +#134791 = ORIENTED_EDGE('',*,*,#130193,.T.); +#134792 = PLANE('',#134793); +#134793 = AXIS2_PLACEMENT_3D('',#134794,#134795,#134796); +#134794 = CARTESIAN_POINT('',(8.5,2.744800011921,-1.417865955925)); +#134795 = DIRECTION('',(-0.,0.200123318418,0.979770716763)); +#134796 = DIRECTION('',(1.,0.,0.)); +#134797 = ADVANCED_FACE('',(#134798),#134809,.T.); +#134798 = FACE_BOUND('',#134799,.T.); +#134799 = EDGE_LOOP('',(#134800,#134801,#134802,#134808)); +#134800 = ORIENTED_EDGE('',*,*,#134786,.T.); +#134801 = ORIENTED_EDGE('',*,*,#133205,.F.); +#134802 = ORIENTED_EDGE('',*,*,#134803,.F.); +#134803 = EDGE_CURVE('',#130202,#133198,#134804,.T.); +#134804 = LINE('',#134805,#134806); +#134805 = CARTESIAN_POINT('',(8.5,2.7948,-1.4561638237)); +#134806 = VECTOR('',#134807,1.); +#134807 = DIRECTION('',(1.,0.,0.)); +#134808 = ORIENTED_EDGE('',*,*,#130201,.T.); +#134809 = PLANE('',#134810); +#134810 = AXIS2_PLACEMENT_3D('',#134811,#134812,#134813); +#134811 = CARTESIAN_POINT('',(8.5,2.7948,-1.4561638237)); +#134812 = DIRECTION('',(-0.,0.608076923474,0.793878111009)); +#134813 = DIRECTION('',(1.,0.,0.)); +#134814 = ADVANCED_FACE('',(#134815),#134826,.T.); +#134815 = FACE_BOUND('',#134816,.T.); +#134816 = EDGE_LOOP('',(#134817,#134818,#134819,#134825)); +#134817 = ORIENTED_EDGE('',*,*,#134803,.T.); +#134818 = ORIENTED_EDGE('',*,*,#133197,.F.); +#134819 = ORIENTED_EDGE('',*,*,#134820,.F.); +#134820 = EDGE_CURVE('',#130210,#133190,#134821,.T.); +#134821 = LINE('',#134822,#134823); +#134822 = CARTESIAN_POINT('',(8.5,2.8323,-1.5072276474)); +#134823 = VECTOR('',#134824,1.); +#134824 = DIRECTION('',(1.,0.,0.)); +#134825 = ORIENTED_EDGE('',*,*,#130209,.T.); +#134826 = PLANE('',#134827); +#134827 = AXIS2_PLACEMENT_3D('',#134828,#134829,#134830); +#134828 = CARTESIAN_POINT('',(8.5,2.8323,-1.5072276474)); +#134829 = DIRECTION('',(-0.,0.806004395831,0.59190954875)); +#134830 = DIRECTION('',(1.,0.,0.)); +#134831 = ADVANCED_FACE('',(#134832),#134843,.T.); +#134832 = FACE_BOUND('',#134833,.T.); +#134833 = EDGE_LOOP('',(#134834,#134835,#134836,#134842)); +#134834 = ORIENTED_EDGE('',*,*,#134820,.T.); +#134835 = ORIENTED_EDGE('',*,*,#133189,.F.); +#134836 = ORIENTED_EDGE('',*,*,#134837,.F.); +#134837 = EDGE_CURVE('',#130218,#133182,#134838,.T.); +#134838 = LINE('',#134839,#134840); +#134839 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.545525515175)); +#134840 = VECTOR('',#134841,1.); +#134841 = DIRECTION('',(1.,0.,0.)); +#134842 = ORIENTED_EDGE('',*,*,#130217,.T.); +#134843 = PLANE('',#134844); +#134844 = AXIS2_PLACEMENT_3D('',#134845,#134846,#134847); +#134845 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.545525515175)); +#134846 = DIRECTION('',(-0.,0.950645279393,0.310279797551)); +#134847 = DIRECTION('',(1.,0.,0.)); +#134848 = ADVANCED_FACE('',(#134849),#134860,.T.); +#134849 = FACE_BOUND('',#134850,.T.); +#134850 = EDGE_LOOP('',(#134851,#134852,#134853,#134859)); +#134851 = ORIENTED_EDGE('',*,*,#134837,.T.); +#134852 = ORIENTED_EDGE('',*,*,#133181,.F.); +#134853 = ORIENTED_EDGE('',*,*,#134854,.F.); +#134854 = EDGE_CURVE('',#130226,#133174,#134855,.T.); +#134855 = LINE('',#134856,#134857); +#134856 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.596589374638)); +#134857 = VECTOR('',#134858,1.); +#134858 = DIRECTION('',(1.,0.,0.)); +#134859 = ORIENTED_EDGE('',*,*,#130225,.T.); +#134860 = PLANE('',#134861); +#134861 = AXIS2_PLACEMENT_3D('',#134862,#134863,#134864); +#134862 = CARTESIAN_POINT('',(8.5,2.844799988079,-1.596589374638)); +#134863 = DIRECTION('',(0.,1.,0.)); +#134864 = DIRECTION('',(0.,-0.,1.)); +#134865 = ADVANCED_FACE('',(#134866),#134877,.T.); +#134866 = FACE_BOUND('',#134867,.T.); +#134867 = EDGE_LOOP('',(#134868,#134869,#134870,#134876)); +#134868 = ORIENTED_EDGE('',*,*,#134854,.T.); +#134869 = ORIENTED_EDGE('',*,*,#133173,.F.); +#134870 = ORIENTED_EDGE('',*,*,#134871,.F.); +#134871 = EDGE_CURVE('',#130234,#133166,#134872,.T.); +#134872 = LINE('',#134873,#134874); +#134873 = CARTESIAN_POINT('',(8.5,2.8323,-1.634887242413)); +#134874 = VECTOR('',#134875,1.); +#134875 = DIRECTION('',(1.,0.,2.220446049251E-14)); +#134876 = ORIENTED_EDGE('',*,*,#130233,.T.); +#134877 = PLANE('',#134878); +#134878 = AXIS2_PLACEMENT_3D('',#134879,#134880,#134881); +#134879 = CARTESIAN_POINT('',(8.5,2.8323,-1.634887242413)); +#134880 = DIRECTION('',(0.,0.950645279393,-0.310279797551)); +#134881 = DIRECTION('',(0.,0.310279797551,0.950645279393)); +#134882 = ADVANCED_FACE('',(#134883),#134889,.T.); +#134883 = FACE_BOUND('',#134884,.T.); +#134884 = EDGE_LOOP('',(#134885,#134886,#134887,#134888)); +#134885 = ORIENTED_EDGE('',*,*,#134871,.T.); +#134886 = ORIENTED_EDGE('',*,*,#133163,.F.); +#134887 = ORIENTED_EDGE('',*,*,#134575,.F.); +#134888 = ORIENTED_EDGE('',*,*,#130241,.T.); +#134889 = PLANE('',#134890); +#134890 = AXIS2_PLACEMENT_3D('',#134891,#134892,#134893); +#134891 = CARTESIAN_POINT('',(8.5,2.7948,-1.685951066113)); +#134892 = DIRECTION('',(0.,0.806004395831,-0.59190954875)); +#134893 = DIRECTION('',(0.,0.59190954875,0.806004395831)); +#134894 = ADVANCED_FACE('',(#134895),#134911,.T.); +#134895 = FACE_BOUND('',#134896,.T.); +#134896 = EDGE_LOOP('',(#134897,#134903,#134904,#134910)); +#134897 = ORIENTED_EDGE('',*,*,#134898,.T.); +#134898 = EDGE_CURVE('',#131311,#133318,#134899,.T.); +#134899 = LINE('',#134900,#134901); +#134900 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.48169573555)); +#134901 = VECTOR('',#134902,1.); +#134902 = DIRECTION('',(1.,0.,0.)); +#134903 = ORIENTED_EDGE('',*,*,#133391,.F.); +#134904 = ORIENTED_EDGE('',*,*,#134905,.F.); +#134905 = EDGE_CURVE('',#131247,#133384,#134906,.T.); +#134906 = LINE('',#134907,#134908); +#134907 = CARTESIAN_POINT('',(8.5,2.4573,-1.48169573555)); +#134908 = VECTOR('',#134909,1.); +#134909 = DIRECTION('',(1.,0.,0.)); +#134910 = ORIENTED_EDGE('',*,*,#131318,.T.); +#134911 = PLANE('',#134912); +#134912 = AXIS2_PLACEMENT_3D('',#134913,#134914,#134915); +#134913 = CARTESIAN_POINT('',(8.5,2.4573,-1.48169573555)); +#134914 = DIRECTION('',(0.,0.,-1.)); +#134915 = DIRECTION('',(-1.,0.,0.)); +#134916 = ADVANCED_FACE('',(#134917),#134928,.T.); +#134917 = FACE_BOUND('',#134918,.T.); +#134918 = EDGE_LOOP('',(#134919,#134920,#134921,#134927)); +#134919 = ORIENTED_EDGE('',*,*,#134905,.T.); +#134920 = ORIENTED_EDGE('',*,*,#133383,.F.); +#134921 = ORIENTED_EDGE('',*,*,#134922,.F.); +#134922 = EDGE_CURVE('',#131245,#133376,#134923,.T.); +#134923 = LINE('',#134924,#134925); +#134924 = CARTESIAN_POINT('',(8.5,2.4573,-1.660419154263)); +#134925 = VECTOR('',#134926,1.); +#134926 = DIRECTION('',(1.,0.,0.)); +#134927 = ORIENTED_EDGE('',*,*,#131244,.T.); +#134928 = PLANE('',#134929); +#134929 = AXIS2_PLACEMENT_3D('',#134930,#134931,#134932); +#134930 = CARTESIAN_POINT('',(8.5,2.4573,-1.660419154263)); +#134931 = DIRECTION('',(0.,1.,0.)); +#134932 = DIRECTION('',(0.,-0.,1.)); +#134933 = ADVANCED_FACE('',(#134934),#134945,.T.); +#134934 = FACE_BOUND('',#134935,.T.); +#134935 = EDGE_LOOP('',(#134936,#134937,#134938,#134944)); +#134936 = ORIENTED_EDGE('',*,*,#134922,.T.); +#134937 = ORIENTED_EDGE('',*,*,#133375,.F.); +#134938 = ORIENTED_EDGE('',*,*,#134939,.F.); +#134939 = EDGE_CURVE('',#131255,#133368,#134940,.T.); +#134940 = LINE('',#134941,#134942); +#134941 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.660419154263)); +#134942 = VECTOR('',#134943,1.); +#134943 = DIRECTION('',(1.,0.,0.)); +#134944 = ORIENTED_EDGE('',*,*,#131254,.T.); +#134945 = PLANE('',#134946); +#134946 = AXIS2_PLACEMENT_3D('',#134947,#134948,#134949); +#134947 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.660419154263)); +#134948 = DIRECTION('',(0.,0.,1.)); +#134949 = DIRECTION('',(0.,-1.,0.)); +#134950 = ADVANCED_FACE('',(#134951),#134962,.T.); +#134951 = FACE_BOUND('',#134952,.T.); +#134952 = EDGE_LOOP('',(#134953,#134954,#134955,#134961)); +#134953 = ORIENTED_EDGE('',*,*,#134939,.T.); +#134954 = ORIENTED_EDGE('',*,*,#133367,.F.); +#134955 = ORIENTED_EDGE('',*,*,#134956,.F.); +#134956 = EDGE_CURVE('',#131263,#133360,#134957,.T.); +#134957 = LINE('',#134958,#134959); +#134958 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.647653198338)); +#134959 = VECTOR('',#134960,1.); +#134960 = DIRECTION('',(1.,0.,0.)); +#134961 = ORIENTED_EDGE('',*,*,#131262,.T.); +#134962 = PLANE('',#134963); +#134963 = AXIS2_PLACEMENT_3D('',#134964,#134965,#134966); +#134964 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.647653198338)); +#134965 = DIRECTION('',(0.,-0.322263763377,0.94664991777)); +#134966 = DIRECTION('',(-1.,0.,0.)); +#134967 = ADVANCED_FACE('',(#134968),#134979,.T.); +#134968 = FACE_BOUND('',#134969,.T.); +#134969 = EDGE_LOOP('',(#134970,#134971,#134972,#134978)); +#134970 = ORIENTED_EDGE('',*,*,#134956,.T.); +#134971 = ORIENTED_EDGE('',*,*,#133359,.F.); +#134972 = ORIENTED_EDGE('',*,*,#134973,.F.); +#134973 = EDGE_CURVE('',#131271,#133352,#134974,.T.); +#134974 = LINE('',#134975,#134976); +#134975 = CARTESIAN_POINT('',(8.5,2.7573,-1.622121286488)); +#134976 = VECTOR('',#134977,1.); +#134977 = DIRECTION('',(1.,0.,0.)); +#134978 = ORIENTED_EDGE('',*,*,#131270,.T.); +#134979 = PLANE('',#134980); +#134980 = AXIS2_PLACEMENT_3D('',#134981,#134982,#134983); +#134981 = CARTESIAN_POINT('',(8.5,2.7573,-1.622121286488)); +#134982 = DIRECTION('',(0.,-0.714510218035,0.699625005502)); +#134983 = DIRECTION('',(-1.,0.,0.)); +#134984 = ADVANCED_FACE('',(#134985),#134996,.T.); +#134985 = FACE_BOUND('',#134986,.T.); +#134986 = EDGE_LOOP('',(#134987,#134988,#134989,#134995)); +#134987 = ORIENTED_EDGE('',*,*,#134973,.T.); +#134988 = ORIENTED_EDGE('',*,*,#133351,.F.); +#134989 = ORIENTED_EDGE('',*,*,#134990,.F.); +#134990 = EDGE_CURVE('',#131279,#133344,#134991,.T.); +#134991 = LINE('',#134992,#134993); +#134992 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.583823418713)); +#134993 = VECTOR('',#134994,1.); +#134994 = DIRECTION('',(1.,0.,1.110223024625E-14)); +#134995 = ORIENTED_EDGE('',*,*,#131278,.T.); +#134996 = PLANE('',#134997); +#134997 = AXIS2_PLACEMENT_3D('',#134998,#134999,#135000); +#134998 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.583823418713)); +#134999 = DIRECTION('',(0.,-0.950645279393,0.310279797551)); +#135000 = DIRECTION('',(-1.,0.,0.)); +#135001 = ADVANCED_FACE('',(#135002),#135013,.T.); +#135002 = FACE_BOUND('',#135003,.T.); +#135003 = EDGE_LOOP('',(#135004,#135005,#135006,#135012)); +#135004 = ORIENTED_EDGE('',*,*,#134990,.T.); +#135005 = ORIENTED_EDGE('',*,*,#133343,.F.); +#135006 = ORIENTED_EDGE('',*,*,#135007,.F.); +#135007 = EDGE_CURVE('',#131287,#133336,#135008,.T.); +#135008 = LINE('',#135009,#135010); +#135009 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.558291506863)); +#135010 = VECTOR('',#135011,1.); +#135011 = DIRECTION('',(1.,0.,0.)); +#135012 = ORIENTED_EDGE('',*,*,#131286,.T.); +#135013 = PLANE('',#135014); +#135014 = AXIS2_PLACEMENT_3D('',#135015,#135016,#135017); +#135015 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.558291506863)); +#135016 = DIRECTION('',(0.,-1.,0.)); +#135017 = DIRECTION('',(1.,0.,0.)); +#135018 = ADVANCED_FACE('',(#135019),#135030,.T.); +#135019 = FACE_BOUND('',#135020,.T.); +#135020 = EDGE_LOOP('',(#135021,#135022,#135023,#135029)); +#135021 = ORIENTED_EDGE('',*,*,#135007,.T.); +#135022 = ORIENTED_EDGE('',*,*,#133335,.F.); +#135023 = ORIENTED_EDGE('',*,*,#135024,.F.); +#135024 = EDGE_CURVE('',#131295,#133328,#135025,.T.); +#135025 = LINE('',#135026,#135027); +#135026 = CARTESIAN_POINT('',(8.5,2.7573,-1.519993603325)); +#135027 = VECTOR('',#135028,1.); +#135028 = DIRECTION('',(1.,0.,0.)); +#135029 = ORIENTED_EDGE('',*,*,#131294,.T.); +#135030 = PLANE('',#135031); +#135031 = AXIS2_PLACEMENT_3D('',#135032,#135033,#135034); +#135032 = CARTESIAN_POINT('',(8.5,2.7573,-1.519993603325)); +#135033 = DIRECTION('',(-0.,-0.950645364857,-0.310279535704)); +#135034 = DIRECTION('',(-1.,0.,0.)); +#135035 = ADVANCED_FACE('',(#135036),#135047,.T.); +#135036 = FACE_BOUND('',#135037,.T.); +#135037 = EDGE_LOOP('',(#135038,#135039,#135040,#135046)); +#135038 = ORIENTED_EDGE('',*,*,#135024,.T.); +#135039 = ORIENTED_EDGE('',*,*,#133327,.F.); +#135040 = ORIENTED_EDGE('',*,*,#135041,.F.); +#135041 = EDGE_CURVE('',#131303,#133320,#135042,.T.); +#135042 = LINE('',#135043,#135044); +#135043 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.494461691475)); +#135044 = VECTOR('',#135045,1.); +#135045 = DIRECTION('',(1.,0.,1.110223024625E-14)); +#135046 = ORIENTED_EDGE('',*,*,#131302,.T.); +#135047 = PLANE('',#135048); +#135048 = AXIS2_PLACEMENT_3D('',#135049,#135050,#135051); +#135049 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.494461691475)); +#135050 = DIRECTION('',(-0.,-0.714510218035,-0.699625005502)); +#135051 = DIRECTION('',(-1.,0.,0.)); +#135052 = ADVANCED_FACE('',(#135053),#135059,.T.); +#135053 = FACE_BOUND('',#135054,.T.); +#135054 = EDGE_LOOP('',(#135055,#135056,#135057,#135058)); +#135055 = ORIENTED_EDGE('',*,*,#135041,.T.); +#135056 = ORIENTED_EDGE('',*,*,#133317,.F.); +#135057 = ORIENTED_EDGE('',*,*,#134898,.F.); +#135058 = ORIENTED_EDGE('',*,*,#131310,.T.); +#135059 = PLANE('',#135060); +#135060 = AXIS2_PLACEMENT_3D('',#135061,#135062,#135063); +#135061 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.48169573555)); +#135062 = DIRECTION('',(-0.,-0.322263763377,-0.94664991777)); +#135063 = DIRECTION('',(-1.,0.,0.)); +#135064 = ADVANCED_FACE('',(#135065),#135081,.T.); +#135065 = FACE_BOUND('',#135066,.T.); +#135066 = EDGE_LOOP('',(#135067,#135073,#135074,#135080)); +#135067 = ORIENTED_EDGE('',*,*,#135068,.T.); +#135068 = EDGE_CURVE('',#131399,#133400,#135069,.T.); +#135069 = LINE('',#135070,#135071); +#135070 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.851908511019)); +#135071 = VECTOR('',#135072,1.); +#135072 = DIRECTION('',(1.,0.,0.)); +#135073 = ORIENTED_EDGE('',*,*,#133473,.F.); +#135074 = ORIENTED_EDGE('',*,*,#135075,.F.); +#135075 = EDGE_CURVE('',#131335,#133466,#135076,.T.); +#135076 = LINE('',#135077,#135078); +#135077 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.813610643244)); +#135078 = VECTOR('',#135079,1.); +#135079 = DIRECTION('',(1.,0.,0.)); +#135080 = ORIENTED_EDGE('',*,*,#131406,.T.); +#135081 = PLANE('',#135082); +#135082 = AXIS2_PLACEMENT_3D('',#135083,#135084,#135085); +#135083 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.813610643244)); +#135084 = DIRECTION('',(0.,-1.,0.)); +#135085 = DIRECTION('',(1.,0.,0.)); +#135086 = ADVANCED_FACE('',(#135087),#135098,.T.); +#135087 = FACE_BOUND('',#135088,.T.); +#135088 = EDGE_LOOP('',(#135089,#135090,#135091,#135097)); +#135089 = ORIENTED_EDGE('',*,*,#135075,.T.); +#135090 = ORIENTED_EDGE('',*,*,#133465,.F.); +#135091 = ORIENTED_EDGE('',*,*,#135092,.F.); +#135092 = EDGE_CURVE('',#131333,#133458,#135093,.T.); +#135093 = LINE('',#135094,#135095); +#135094 = CARTESIAN_POINT('',(8.5,2.7573,-1.775312757587)); +#135095 = VECTOR('',#135096,1.); +#135096 = DIRECTION('',(1.,2.220446049251E-14,0.)); +#135097 = ORIENTED_EDGE('',*,*,#131332,.T.); +#135098 = PLANE('',#135099); +#135099 = AXIS2_PLACEMENT_3D('',#135100,#135101,#135102); +#135100 = CARTESIAN_POINT('',(8.5,2.7573,-1.775312757587)); +#135101 = DIRECTION('',(-0.,-0.950645322125,-0.310279666627)); +#135102 = DIRECTION('',(-1.,0.,0.)); +#135103 = ADVANCED_FACE('',(#135104),#135115,.T.); +#135104 = FACE_BOUND('',#135105,.T.); +#135105 = EDGE_LOOP('',(#135106,#135107,#135108,#135114)); +#135106 = ORIENTED_EDGE('',*,*,#135092,.T.); +#135107 = ORIENTED_EDGE('',*,*,#133457,.F.); +#135108 = ORIENTED_EDGE('',*,*,#135109,.F.); +#135109 = EDGE_CURVE('',#131343,#133450,#135110,.T.); +#135110 = LINE('',#135111,#135112); +#135111 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.749780845737)); +#135112 = VECTOR('',#135113,1.); +#135113 = DIRECTION('',(1.,0.,0.)); +#135114 = ORIENTED_EDGE('',*,*,#131342,.T.); +#135115 = PLANE('',#135116); +#135116 = AXIS2_PLACEMENT_3D('',#135117,#135118,#135119); +#135117 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.749780845737)); +#135118 = DIRECTION('',(-0.,-0.714510218035,-0.699625005502)); +#135119 = DIRECTION('',(-1.,0.,0.)); +#135120 = ADVANCED_FACE('',(#135121),#135132,.T.); +#135121 = FACE_BOUND('',#135122,.T.); +#135122 = EDGE_LOOP('',(#135123,#135124,#135125,#135131)); +#135123 = ORIENTED_EDGE('',*,*,#135109,.T.); +#135124 = ORIENTED_EDGE('',*,*,#133449,.F.); +#135125 = ORIENTED_EDGE('',*,*,#135126,.F.); +#135126 = EDGE_CURVE('',#131351,#133442,#135127,.T.); +#135127 = LINE('',#135128,#135129); +#135128 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.737014889812)); +#135129 = VECTOR('',#135130,1.); +#135130 = DIRECTION('',(1.,0.,0.)); +#135131 = ORIENTED_EDGE('',*,*,#131350,.T.); +#135132 = PLANE('',#135133); +#135133 = AXIS2_PLACEMENT_3D('',#135134,#135135,#135136); +#135134 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.737014889812)); +#135135 = DIRECTION('',(-0.,-0.322263763377,-0.94664991777)); +#135136 = DIRECTION('',(-1.,0.,0.)); +#135137 = ADVANCED_FACE('',(#135138),#135149,.T.); +#135138 = FACE_BOUND('',#135139,.T.); +#135139 = EDGE_LOOP('',(#135140,#135141,#135142,#135148)); +#135140 = ORIENTED_EDGE('',*,*,#135126,.T.); +#135141 = ORIENTED_EDGE('',*,*,#133441,.F.); +#135142 = ORIENTED_EDGE('',*,*,#135143,.F.); +#135143 = EDGE_CURVE('',#131359,#133434,#135144,.T.); +#135144 = LINE('',#135145,#135146); +#135145 = CARTESIAN_POINT('',(8.5,2.4573,-1.737014889812)); +#135146 = VECTOR('',#135147,1.); +#135147 = DIRECTION('',(1.,0.,0.)); +#135148 = ORIENTED_EDGE('',*,*,#131358,.T.); +#135149 = PLANE('',#135150); +#135150 = AXIS2_PLACEMENT_3D('',#135151,#135152,#135153); +#135151 = CARTESIAN_POINT('',(8.5,2.4573,-1.737014889812)); +#135152 = DIRECTION('',(0.,0.,-1.)); +#135153 = DIRECTION('',(-1.,0.,0.)); +#135154 = ADVANCED_FACE('',(#135155),#135166,.T.); +#135155 = FACE_BOUND('',#135156,.T.); +#135156 = EDGE_LOOP('',(#135157,#135158,#135159,#135165)); +#135157 = ORIENTED_EDGE('',*,*,#135143,.T.); +#135158 = ORIENTED_EDGE('',*,*,#133433,.F.); +#135159 = ORIENTED_EDGE('',*,*,#135160,.F.); +#135160 = EDGE_CURVE('',#131367,#133426,#135161,.T.); +#135161 = LINE('',#135162,#135163); +#135162 = CARTESIAN_POINT('',(8.5,2.4573,-1.928504255509)); +#135163 = VECTOR('',#135164,1.); +#135164 = DIRECTION('',(1.,0.,0.)); +#135165 = ORIENTED_EDGE('',*,*,#131366,.T.); +#135166 = PLANE('',#135167); +#135167 = AXIS2_PLACEMENT_3D('',#135168,#135169,#135170); +#135168 = CARTESIAN_POINT('',(8.5,2.4573,-1.928504255509)); +#135169 = DIRECTION('',(0.,1.,0.)); +#135170 = DIRECTION('',(0.,-0.,1.)); +#135171 = ADVANCED_FACE('',(#135172),#135183,.T.); +#135172 = FACE_BOUND('',#135173,.T.); +#135173 = EDGE_LOOP('',(#135174,#135175,#135176,#135182)); +#135174 = ORIENTED_EDGE('',*,*,#135160,.T.); +#135175 = ORIENTED_EDGE('',*,*,#133425,.F.); +#135176 = ORIENTED_EDGE('',*,*,#135177,.F.); +#135177 = EDGE_CURVE('',#131375,#133418,#135178,.T.); +#135178 = LINE('',#135179,#135180); +#135179 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.928504255509)); +#135180 = VECTOR('',#135181,1.); +#135181 = DIRECTION('',(1.,0.,0.)); +#135182 = ORIENTED_EDGE('',*,*,#131374,.T.); +#135183 = PLANE('',#135184); +#135184 = AXIS2_PLACEMENT_3D('',#135185,#135186,#135187); +#135185 = CARTESIAN_POINT('',(8.5,2.694799988079,-1.928504255509)); +#135186 = DIRECTION('',(0.,0.,1.)); +#135187 = DIRECTION('',(0.,-1.,0.)); +#135188 = ADVANCED_FACE('',(#135189),#135200,.T.); +#135189 = FACE_BOUND('',#135190,.T.); +#135190 = EDGE_LOOP('',(#135191,#135192,#135193,#135199)); +#135191 = ORIENTED_EDGE('',*,*,#135177,.T.); +#135192 = ORIENTED_EDGE('',*,*,#133417,.F.); +#135193 = ORIENTED_EDGE('',*,*,#135194,.F.); +#135194 = EDGE_CURVE('',#131383,#133410,#135195,.T.); +#135195 = LINE('',#135196,#135197); +#135196 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.915738299584)); +#135197 = VECTOR('',#135198,1.); +#135198 = DIRECTION('',(1.,0.,0.)); +#135199 = ORIENTED_EDGE('',*,*,#131382,.T.); +#135200 = PLANE('',#135201); +#135201 = AXIS2_PLACEMENT_3D('',#135202,#135203,#135204); +#135202 = CARTESIAN_POINT('',(8.5,2.732299988079,-1.915738299584)); +#135203 = DIRECTION('',(0.,-0.322263763377,0.94664991777)); +#135204 = DIRECTION('',(-1.,0.,0.)); +#135205 = ADVANCED_FACE('',(#135206),#135217,.T.); +#135206 = FACE_BOUND('',#135207,.T.); +#135207 = EDGE_LOOP('',(#135208,#135209,#135210,#135216)); +#135208 = ORIENTED_EDGE('',*,*,#135194,.T.); +#135209 = ORIENTED_EDGE('',*,*,#133409,.F.); +#135210 = ORIENTED_EDGE('',*,*,#135211,.F.); +#135211 = EDGE_CURVE('',#131391,#133402,#135212,.T.); +#135212 = LINE('',#135213,#135214); +#135213 = CARTESIAN_POINT('',(8.5,2.7573,-1.890206378794)); +#135214 = VECTOR('',#135215,1.); +#135215 = DIRECTION('',(1.,0.,0.)); +#135216 = ORIENTED_EDGE('',*,*,#131390,.T.); +#135217 = PLANE('',#135218); +#135218 = AXIS2_PLACEMENT_3D('',#135219,#135220,#135221); +#135219 = CARTESIAN_POINT('',(8.5,2.7573,-1.890206378794)); +#135220 = DIRECTION('',(0.,-0.714510340504,0.699624880427)); +#135221 = DIRECTION('',(-1.,0.,0.)); +#135222 = ADVANCED_FACE('',(#135223),#135229,.T.); +#135223 = FACE_BOUND('',#135224,.T.); +#135224 = EDGE_LOOP('',(#135225,#135226,#135227,#135228)); +#135225 = ORIENTED_EDGE('',*,*,#135211,.T.); +#135226 = ORIENTED_EDGE('',*,*,#133399,.F.); +#135227 = ORIENTED_EDGE('',*,*,#135068,.F.); +#135228 = ORIENTED_EDGE('',*,*,#131398,.T.); +#135229 = PLANE('',#135230); +#135230 = AXIS2_PLACEMENT_3D('',#135231,#135232,#135233); +#135231 = CARTESIAN_POINT('',(8.5,2.769799988079,-1.851908511019)); +#135232 = DIRECTION('',(0.,-0.950645279393,0.310279797551)); +#135233 = DIRECTION('',(-1.,0.,0.)); +#135234 = ADVANCED_FACE('',(#135235),#135261,.F.); +#135235 = FACE_BOUND('',#135236,.F.); +#135236 = EDGE_LOOP('',(#135237,#135238,#135246,#135255)); +#135237 = ORIENTED_EDGE('',*,*,#129917,.F.); +#135238 = ORIENTED_EDGE('',*,*,#135239,.T.); +#135239 = EDGE_CURVE('',#129909,#135240,#135242,.T.); +#135240 = VERTEX_POINT('',#135241); +#135241 = CARTESIAN_POINT('',(8.5,0.,-7.25)); +#135242 = LINE('',#135243,#135244); +#135243 = CARTESIAN_POINT('',(8.9,0.,-7.25)); +#135244 = VECTOR('',#135245,1.); +#135245 = DIRECTION('',(-1.,0.,0.)); +#135246 = ORIENTED_EDGE('',*,*,#135247,.T.); +#135247 = EDGE_CURVE('',#135240,#135248,#135250,.T.); +#135248 = VERTEX_POINT('',#135249); +#135249 = CARTESIAN_POINT('',(8.5,0.,-2.25)); +#135250 = CIRCLE('',#135251,2.5); +#135251 = AXIS2_PLACEMENT_3D('',#135252,#135253,#135254); +#135252 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135253 = DIRECTION('',(1.,0.,0.)); +#135254 = DIRECTION('',(0.,0.,-1.)); +#135255 = ORIENTED_EDGE('',*,*,#135256,.F.); +#135256 = EDGE_CURVE('',#129907,#135248,#135257,.T.); +#135257 = LINE('',#135258,#135259); +#135258 = CARTESIAN_POINT('',(8.9,0.,-2.25)); +#135259 = VECTOR('',#135260,1.); +#135260 = DIRECTION('',(-1.,0.,0.)); +#135261 = CYLINDRICAL_SURFACE('',#135262,2.5); +#135262 = AXIS2_PLACEMENT_3D('',#135263,#135264,#135265); +#135263 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#135264 = DIRECTION('',(1.,0.,0.)); +#135265 = DIRECTION('',(0.,0.,-1.)); +#135266 = ADVANCED_FACE('',(#135267),#135279,.F.); +#135267 = FACE_BOUND('',#135268,.F.); +#135268 = EDGE_LOOP('',(#135269,#135270,#135271,#135278)); +#135269 = ORIENTED_EDGE('',*,*,#129906,.F.); +#135270 = ORIENTED_EDGE('',*,*,#135256,.T.); +#135271 = ORIENTED_EDGE('',*,*,#135272,.T.); +#135272 = EDGE_CURVE('',#135248,#135240,#135273,.T.); +#135273 = CIRCLE('',#135274,2.5); +#135274 = AXIS2_PLACEMENT_3D('',#135275,#135276,#135277); +#135275 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135276 = DIRECTION('',(1.,0.,-0.)); +#135277 = DIRECTION('',(0.,0.,1.)); +#135278 = ORIENTED_EDGE('',*,*,#135239,.F.); +#135279 = CYLINDRICAL_SURFACE('',#135280,2.5); +#135280 = AXIS2_PLACEMENT_3D('',#135281,#135282,#135283); +#135281 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#135282 = DIRECTION('',(1.,0.,0.)); +#135283 = DIRECTION('',(0.,0.,-1.)); +#135284 = ADVANCED_FACE('',(#135285,#135289),#135309,.T.); +#135285 = FACE_BOUND('',#135286,.T.); +#135286 = EDGE_LOOP('',(#135287,#135288)); +#135287 = ORIENTED_EDGE('',*,*,#135272,.T.); +#135288 = ORIENTED_EDGE('',*,*,#135247,.T.); +#135289 = FACE_BOUND('',#135290,.T.); +#135290 = EDGE_LOOP('',(#135291,#135302)); +#135291 = ORIENTED_EDGE('',*,*,#135292,.F.); +#135292 = EDGE_CURVE('',#135293,#135295,#135297,.T.); +#135293 = VERTEX_POINT('',#135294); +#135294 = CARTESIAN_POINT('',(8.5,0.,-3.)); +#135295 = VERTEX_POINT('',#135296); +#135296 = CARTESIAN_POINT('',(8.5,0.,-6.5)); +#135297 = CIRCLE('',#135298,1.75); +#135298 = AXIS2_PLACEMENT_3D('',#135299,#135300,#135301); +#135299 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135300 = DIRECTION('',(1.,0.,-0.)); +#135301 = DIRECTION('',(0.,0.,1.)); +#135302 = ORIENTED_EDGE('',*,*,#135303,.F.); +#135303 = EDGE_CURVE('',#135295,#135293,#135304,.T.); +#135304 = CIRCLE('',#135305,1.75); +#135305 = AXIS2_PLACEMENT_3D('',#135306,#135307,#135308); +#135306 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135307 = DIRECTION('',(1.,0.,0.)); +#135308 = DIRECTION('',(0.,0.,-1.)); +#135309 = PLANE('',#135310); +#135310 = AXIS2_PLACEMENT_3D('',#135311,#135312,#135313); +#135311 = CARTESIAN_POINT('',(8.5,4.75,0.)); +#135312 = DIRECTION('',(1.,0.,0.)); +#135313 = DIRECTION('',(0.,-1.,0.)); +#135314 = ADVANCED_FACE('',(#135315),#135341,.T.); +#135315 = FACE_BOUND('',#135316,.T.); +#135316 = EDGE_LOOP('',(#135317,#135325,#135334,#135340)); +#135317 = ORIENTED_EDGE('',*,*,#135318,.T.); +#135318 = EDGE_CURVE('',#135293,#135319,#135321,.T.); +#135319 = VERTEX_POINT('',#135320); +#135320 = CARTESIAN_POINT('',(8.9,0.,-3.)); +#135321 = LINE('',#135322,#135323); +#135322 = CARTESIAN_POINT('',(8.5,0.,-3.)); +#135323 = VECTOR('',#135324,1.); +#135324 = DIRECTION('',(1.,0.,0.)); +#135325 = ORIENTED_EDGE('',*,*,#135326,.F.); +#135326 = EDGE_CURVE('',#135327,#135319,#135329,.T.); +#135327 = VERTEX_POINT('',#135328); +#135328 = CARTESIAN_POINT('',(8.9,0.,-6.5)); +#135329 = CIRCLE('',#135330,1.75); +#135330 = AXIS2_PLACEMENT_3D('',#135331,#135332,#135333); +#135331 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#135332 = DIRECTION('',(1.,0.,0.)); +#135333 = DIRECTION('',(0.,0.,-1.)); +#135334 = ORIENTED_EDGE('',*,*,#135335,.F.); +#135335 = EDGE_CURVE('',#135295,#135327,#135336,.T.); +#135336 = LINE('',#135337,#135338); +#135337 = CARTESIAN_POINT('',(8.5,0.,-6.5)); +#135338 = VECTOR('',#135339,1.); +#135339 = DIRECTION('',(1.,0.,0.)); +#135340 = ORIENTED_EDGE('',*,*,#135303,.T.); +#135341 = CYLINDRICAL_SURFACE('',#135342,1.75); +#135342 = AXIS2_PLACEMENT_3D('',#135343,#135344,#135345); +#135343 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135344 = DIRECTION('',(1.,0.,0.)); +#135345 = DIRECTION('',(0.,0.,-1.)); +#135346 = ADVANCED_FACE('',(#135347),#135359,.T.); +#135347 = FACE_BOUND('',#135348,.T.); +#135348 = EDGE_LOOP('',(#135349,#135350,#135357,#135358)); +#135349 = ORIENTED_EDGE('',*,*,#135335,.T.); +#135350 = ORIENTED_EDGE('',*,*,#135351,.F.); +#135351 = EDGE_CURVE('',#135319,#135327,#135352,.T.); +#135352 = CIRCLE('',#135353,1.75); +#135353 = AXIS2_PLACEMENT_3D('',#135354,#135355,#135356); +#135354 = CARTESIAN_POINT('',(8.9,0.,-4.75)); +#135355 = DIRECTION('',(1.,0.,-0.)); +#135356 = DIRECTION('',(0.,0.,1.)); +#135357 = ORIENTED_EDGE('',*,*,#135318,.F.); +#135358 = ORIENTED_EDGE('',*,*,#135292,.T.); +#135359 = CYLINDRICAL_SURFACE('',#135360,1.75); +#135360 = AXIS2_PLACEMENT_3D('',#135361,#135362,#135363); +#135361 = CARTESIAN_POINT('',(8.5,0.,-4.75)); +#135362 = DIRECTION('',(1.,0.,0.)); +#135363 = DIRECTION('',(0.,0.,-1.)); +#135364 = ADVANCED_FACE('',(#135365,#135369),#135435,.T.); +#135365 = FACE_BOUND('',#135366,.T.); +#135366 = EDGE_LOOP('',(#135367,#135368)); +#135367 = ORIENTED_EDGE('',*,*,#135351,.T.); +#135368 = ORIENTED_EDGE('',*,*,#135326,.T.); +#135369 = FACE_BOUND('',#135370,.T.); +#135370 = EDGE_LOOP('',(#135371,#135381,#135389,#135397,#135405,#135413, + #135421,#135429)); +#135371 = ORIENTED_EDGE('',*,*,#135372,.F.); +#135372 = EDGE_CURVE('',#135373,#135375,#135377,.T.); +#135373 = VERTEX_POINT('',#135374); +#135374 = CARTESIAN_POINT('',(8.9,0.52125,-6.2414)); +#135375 = VERTEX_POINT('',#135376); +#135376 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135377 = LINE('',#135378,#135379); +#135378 = CARTESIAN_POINT('',(8.9,0.52125,-6.2414)); +#135379 = VECTOR('',#135380,1.); +#135380 = DIRECTION('',(0.,0.,1.)); +#135381 = ORIENTED_EDGE('',*,*,#135382,.F.); +#135382 = EDGE_CURVE('',#135383,#135373,#135385,.T.); +#135383 = VERTEX_POINT('',#135384); +#135384 = CARTESIAN_POINT('',(8.9,-0.52125,-6.2414)); +#135385 = LINE('',#135386,#135387); +#135386 = CARTESIAN_POINT('',(8.9,-0.52125,-6.2414)); +#135387 = VECTOR('',#135388,1.); +#135388 = DIRECTION('',(0.,1.,0.)); +#135389 = ORIENTED_EDGE('',*,*,#135390,.F.); +#135390 = EDGE_CURVE('',#135391,#135383,#135393,.T.); +#135391 = VERTEX_POINT('',#135392); +#135392 = CARTESIAN_POINT('',(8.9,-0.52125,-5.5459)); +#135393 = LINE('',#135394,#135395); +#135394 = CARTESIAN_POINT('',(8.9,-0.52125,-5.5459)); +#135395 = VECTOR('',#135396,1.); +#135396 = DIRECTION('',(0.,0.,-1.)); +#135397 = ORIENTED_EDGE('',*,*,#135398,.F.); +#135398 = EDGE_CURVE('',#135399,#135391,#135401,.T.); +#135399 = VERTEX_POINT('',#135400); +#135400 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135401 = LINE('',#135402,#135403); +#135402 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135403 = VECTOR('',#135404,1.); +#135404 = DIRECTION('',(0.,0.,-1.)); +#135405 = ORIENTED_EDGE('',*,*,#135406,.F.); +#135406 = EDGE_CURVE('',#135407,#135399,#135409,.T.); +#135407 = VERTEX_POINT('',#135408); +#135408 = CARTESIAN_POINT('',(8.9,-0.52125,-3.2586)); +#135409 = LINE('',#135410,#135411); +#135410 = CARTESIAN_POINT('',(8.9,-0.52125,-3.2586)); +#135411 = VECTOR('',#135412,1.); +#135412 = DIRECTION('',(0.,0.,-1.)); +#135413 = ORIENTED_EDGE('',*,*,#135414,.F.); +#135414 = EDGE_CURVE('',#135415,#135407,#135417,.T.); +#135415 = VERTEX_POINT('',#135416); +#135416 = CARTESIAN_POINT('',(8.9,0.52125,-3.2586)); +#135417 = LINE('',#135418,#135419); +#135418 = CARTESIAN_POINT('',(8.9,0.52125,-3.2586)); +#135419 = VECTOR('',#135420,1.); +#135420 = DIRECTION('',(0.,-1.,0.)); +#135421 = ORIENTED_EDGE('',*,*,#135422,.F.); +#135422 = EDGE_CURVE('',#135423,#135415,#135425,.T.); +#135423 = VERTEX_POINT('',#135424); +#135424 = CARTESIAN_POINT('',(8.9,0.52125,-3.9541)); +#135425 = LINE('',#135426,#135427); +#135426 = CARTESIAN_POINT('',(8.9,0.52125,-3.9541)); +#135427 = VECTOR('',#135428,1.); +#135428 = DIRECTION('',(0.,0.,1.)); +#135429 = ORIENTED_EDGE('',*,*,#135430,.F.); +#135430 = EDGE_CURVE('',#135375,#135423,#135431,.T.); +#135431 = LINE('',#135432,#135433); +#135432 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135433 = VECTOR('',#135434,1.); +#135434 = DIRECTION('',(0.,0.,1.)); +#135435 = PLANE('',#135436); +#135436 = AXIS2_PLACEMENT_3D('',#135437,#135438,#135439); +#135437 = CARTESIAN_POINT('',(8.9,4.75,0.)); +#135438 = DIRECTION('',(1.,0.,0.)); +#135439 = DIRECTION('',(0.,-1.,0.)); +#135440 = ADVANCED_FACE('',(#135441),#135466,.F.); +#135441 = FACE_BOUND('',#135442,.T.); +#135442 = EDGE_LOOP('',(#135443,#135451,#135459,#135465)); +#135443 = ORIENTED_EDGE('',*,*,#135444,.T.); +#135444 = EDGE_CURVE('',#135423,#135445,#135447,.T.); +#135445 = VERTEX_POINT('',#135446); +#135446 = CARTESIAN_POINT('',(8.7,0.52125,-3.9541)); +#135447 = LINE('',#135448,#135449); +#135448 = CARTESIAN_POINT('',(8.9,0.52125,-3.9541)); +#135449 = VECTOR('',#135450,1.); +#135450 = DIRECTION('',(-1.,0.,0.)); +#135451 = ORIENTED_EDGE('',*,*,#135452,.F.); +#135452 = EDGE_CURVE('',#135453,#135445,#135455,.T.); +#135453 = VERTEX_POINT('',#135454); +#135454 = CARTESIAN_POINT('',(8.7,0.52125,-5.5459)); +#135455 = LINE('',#135456,#135457); +#135456 = CARTESIAN_POINT('',(8.7,0.52125,-5.5459)); +#135457 = VECTOR('',#135458,1.); +#135458 = DIRECTION('',(0.,0.,1.)); +#135459 = ORIENTED_EDGE('',*,*,#135460,.F.); +#135460 = EDGE_CURVE('',#135375,#135453,#135461,.T.); +#135461 = LINE('',#135462,#135463); +#135462 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135463 = VECTOR('',#135464,1.); +#135464 = DIRECTION('',(-1.,0.,0.)); +#135465 = ORIENTED_EDGE('',*,*,#135430,.T.); +#135466 = PLANE('',#135467); +#135467 = AXIS2_PLACEMENT_3D('',#135468,#135469,#135470); +#135468 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135469 = DIRECTION('',(0.,1.,0.)); +#135470 = DIRECTION('',(0.,-0.,1.)); +#135471 = ADVANCED_FACE('',(#135472),#135511,.T.); +#135472 = FACE_BOUND('',#135473,.T.); +#135473 = EDGE_LOOP('',(#135474,#135484,#135490,#135491,#135499,#135505) + ); +#135474 = ORIENTED_EDGE('',*,*,#135475,.F.); +#135475 = EDGE_CURVE('',#135476,#135478,#135480,.T.); +#135476 = VERTEX_POINT('',#135477); +#135477 = CARTESIAN_POINT('',(9.7,0.52125,-5.5459)); +#135478 = VERTEX_POINT('',#135479); +#135479 = CARTESIAN_POINT('',(9.7,-0.52125,-5.5459)); +#135480 = LINE('',#135481,#135482); +#135481 = CARTESIAN_POINT('',(9.7,0.52125,-5.5459)); +#135482 = VECTOR('',#135483,1.); +#135483 = DIRECTION('',(0.,-1.,0.)); +#135484 = ORIENTED_EDGE('',*,*,#135485,.F.); +#135485 = EDGE_CURVE('',#135375,#135476,#135486,.T.); +#135486 = LINE('',#135487,#135488); +#135487 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135488 = VECTOR('',#135489,1.); +#135489 = DIRECTION('',(1.,0.,0.)); +#135490 = ORIENTED_EDGE('',*,*,#135460,.T.); +#135491 = ORIENTED_EDGE('',*,*,#135492,.F.); +#135492 = EDGE_CURVE('',#135493,#135453,#135495,.T.); +#135493 = VERTEX_POINT('',#135494); +#135494 = CARTESIAN_POINT('',(8.7,-0.52125,-5.5459)); +#135495 = LINE('',#135496,#135497); +#135496 = CARTESIAN_POINT('',(8.7,-0.52125,-5.5459)); +#135497 = VECTOR('',#135498,1.); +#135498 = DIRECTION('',(0.,1.,0.)); +#135499 = ORIENTED_EDGE('',*,*,#135500,.F.); +#135500 = EDGE_CURVE('',#135391,#135493,#135501,.T.); +#135501 = LINE('',#135502,#135503); +#135502 = CARTESIAN_POINT('',(8.9,-0.52125,-5.5459)); +#135503 = VECTOR('',#135504,1.); +#135504 = DIRECTION('',(-1.,0.,0.)); +#135505 = ORIENTED_EDGE('',*,*,#135506,.T.); +#135506 = EDGE_CURVE('',#135391,#135478,#135507,.T.); +#135507 = LINE('',#135508,#135509); +#135508 = CARTESIAN_POINT('',(8.9,-0.52125,-5.5459)); +#135509 = VECTOR('',#135510,1.); +#135510 = DIRECTION('',(1.,0.,0.)); +#135511 = PLANE('',#135512); +#135512 = AXIS2_PLACEMENT_3D('',#135513,#135514,#135515); +#135513 = CARTESIAN_POINT('',(8.9,0.52125,-5.5459)); +#135514 = DIRECTION('',(0.,0.,1.)); +#135515 = DIRECTION('',(0.,-1.,0.)); +#135516 = ADVANCED_FACE('',(#135517),#135543,.T.); +#135517 = FACE_BOUND('',#135518,.T.); +#135518 = EDGE_LOOP('',(#135519,#135527,#135535,#135541,#135542)); +#135519 = ORIENTED_EDGE('',*,*,#135520,.T.); +#135520 = EDGE_CURVE('',#135383,#135521,#135523,.T.); +#135521 = VERTEX_POINT('',#135522); +#135522 = CARTESIAN_POINT('',(9.3,-0.52125,-6.2414)); +#135523 = LINE('',#135524,#135525); +#135524 = CARTESIAN_POINT('',(8.9,-0.52125,-6.2414)); +#135525 = VECTOR('',#135526,1.); +#135526 = DIRECTION('',(1.,0.,0.)); +#135527 = ORIENTED_EDGE('',*,*,#135528,.T.); +#135528 = EDGE_CURVE('',#135521,#135529,#135531,.T.); +#135529 = VERTEX_POINT('',#135530); +#135530 = CARTESIAN_POINT('',(9.7,-0.52125,-5.8414)); +#135531 = LINE('',#135532,#135533); +#135532 = CARTESIAN_POINT('',(9.3,-0.52125,-6.2414)); +#135533 = VECTOR('',#135534,1.); +#135534 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#135535 = ORIENTED_EDGE('',*,*,#135536,.F.); +#135536 = EDGE_CURVE('',#135478,#135529,#135537,.T.); +#135537 = LINE('',#135538,#135539); +#135538 = CARTESIAN_POINT('',(9.7,-0.52125,-5.5459)); +#135539 = VECTOR('',#135540,1.); +#135540 = DIRECTION('',(0.,0.,-1.)); +#135541 = ORIENTED_EDGE('',*,*,#135506,.F.); +#135542 = ORIENTED_EDGE('',*,*,#135390,.T.); +#135543 = PLANE('',#135544); +#135544 = AXIS2_PLACEMENT_3D('',#135545,#135546,#135547); +#135545 = CARTESIAN_POINT('',(8.9,-0.52125,-5.5459)); +#135546 = DIRECTION('',(0.,-1.,0.)); +#135547 = DIRECTION('',(1.,0.,0.)); +#135548 = ADVANCED_FACE('',(#135549),#135583,.T.); +#135549 = FACE_BOUND('',#135550,.T.); +#135550 = EDGE_LOOP('',(#135551,#135561,#135569,#135577)); +#135551 = ORIENTED_EDGE('',*,*,#135552,.T.); +#135552 = EDGE_CURVE('',#135553,#135555,#135557,.T.); +#135553 = VERTEX_POINT('',#135554); +#135554 = CARTESIAN_POINT('',(9.7,-0.52125,-3.6586)); +#135555 = VERTEX_POINT('',#135556); +#135556 = CARTESIAN_POINT('',(9.7,-0.52125,-3.9541)); +#135557 = LINE('',#135558,#135559); +#135558 = CARTESIAN_POINT('',(9.7,-0.52125,-3.6586)); +#135559 = VECTOR('',#135560,1.); +#135560 = DIRECTION('',(0.,0.,-1.)); +#135561 = ORIENTED_EDGE('',*,*,#135562,.T.); +#135562 = EDGE_CURVE('',#135555,#135563,#135565,.T.); +#135563 = VERTEX_POINT('',#135564); +#135564 = CARTESIAN_POINT('',(9.7,0.52125,-3.9541)); +#135565 = LINE('',#135566,#135567); +#135566 = CARTESIAN_POINT('',(9.7,-0.52125,-3.9541)); +#135567 = VECTOR('',#135568,1.); +#135568 = DIRECTION('',(0.,1.,0.)); +#135569 = ORIENTED_EDGE('',*,*,#135570,.T.); +#135570 = EDGE_CURVE('',#135563,#135571,#135573,.T.); +#135571 = VERTEX_POINT('',#135572); +#135572 = CARTESIAN_POINT('',(9.7,0.52125,-3.6586)); +#135573 = LINE('',#135574,#135575); +#135574 = CARTESIAN_POINT('',(9.7,0.52125,-3.9541)); +#135575 = VECTOR('',#135576,1.); +#135576 = DIRECTION('',(0.,0.,1.)); +#135577 = ORIENTED_EDGE('',*,*,#135578,.T.); +#135578 = EDGE_CURVE('',#135571,#135553,#135579,.T.); +#135579 = LINE('',#135580,#135581); +#135580 = CARTESIAN_POINT('',(9.7,0.52125,-3.6586)); +#135581 = VECTOR('',#135582,1.); +#135582 = DIRECTION('',(0.,-1.,0.)); +#135583 = PLANE('',#135584); +#135584 = AXIS2_PLACEMENT_3D('',#135585,#135586,#135587); +#135585 = CARTESIAN_POINT('',(9.7,4.75,0.)); +#135586 = DIRECTION('',(1.,0.,0.)); +#135587 = DIRECTION('',(0.,-1.,0.)); +#135588 = ADVANCED_FACE('',(#135589),#135607,.T.); +#135589 = FACE_BOUND('',#135590,.T.); +#135590 = EDGE_LOOP('',(#135591,#135599,#135600,#135601)); +#135591 = ORIENTED_EDGE('',*,*,#135592,.T.); +#135592 = EDGE_CURVE('',#135593,#135476,#135595,.T.); +#135593 = VERTEX_POINT('',#135594); +#135594 = CARTESIAN_POINT('',(9.7,0.52125,-5.8414)); +#135595 = LINE('',#135596,#135597); +#135596 = CARTESIAN_POINT('',(9.7,0.52125,-5.8414)); +#135597 = VECTOR('',#135598,1.); +#135598 = DIRECTION('',(0.,0.,1.)); +#135599 = ORIENTED_EDGE('',*,*,#135475,.T.); +#135600 = ORIENTED_EDGE('',*,*,#135536,.T.); +#135601 = ORIENTED_EDGE('',*,*,#135602,.T.); +#135602 = EDGE_CURVE('',#135529,#135593,#135603,.T.); +#135603 = LINE('',#135604,#135605); +#135604 = CARTESIAN_POINT('',(9.7,-0.52125,-5.8414)); +#135605 = VECTOR('',#135606,1.); +#135606 = DIRECTION('',(0.,1.,0.)); +#135607 = PLANE('',#135608); +#135608 = AXIS2_PLACEMENT_3D('',#135609,#135610,#135611); +#135609 = CARTESIAN_POINT('',(9.7,4.75,0.)); +#135610 = DIRECTION('',(1.,0.,0.)); +#135611 = DIRECTION('',(0.,-1.,0.)); +#135612 = ADVANCED_FACE('',(#135613),#135638,.T.); +#135613 = FACE_BOUND('',#135614,.T.); +#135614 = EDGE_LOOP('',(#135615,#135616,#135624,#135632)); +#135615 = ORIENTED_EDGE('',*,*,#135578,.F.); +#135616 = ORIENTED_EDGE('',*,*,#135617,.F.); +#135617 = EDGE_CURVE('',#135618,#135571,#135620,.T.); +#135618 = VERTEX_POINT('',#135619); +#135619 = CARTESIAN_POINT('',(9.3,0.52125,-3.2586)); +#135620 = LINE('',#135621,#135622); +#135621 = CARTESIAN_POINT('',(9.3,0.52125,-3.2586)); +#135622 = VECTOR('',#135623,1.); +#135623 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#135624 = ORIENTED_EDGE('',*,*,#135625,.T.); +#135625 = EDGE_CURVE('',#135618,#135626,#135628,.T.); +#135626 = VERTEX_POINT('',#135627); +#135627 = CARTESIAN_POINT('',(9.3,-0.52125,-3.2586)); +#135628 = LINE('',#135629,#135630); +#135629 = CARTESIAN_POINT('',(9.3,0.52125,-3.2586)); +#135630 = VECTOR('',#135631,1.); +#135631 = DIRECTION('',(0.,-1.,0.)); +#135632 = ORIENTED_EDGE('',*,*,#135633,.F.); +#135633 = EDGE_CURVE('',#135553,#135626,#135634,.T.); +#135634 = LINE('',#135635,#135636); +#135635 = CARTESIAN_POINT('',(9.7,-0.52125,-3.6586)); +#135636 = VECTOR('',#135637,1.); +#135637 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#135638 = PLANE('',#135639); +#135639 = AXIS2_PLACEMENT_3D('',#135640,#135641,#135642); +#135640 = CARTESIAN_POINT('',(9.5,0.,-3.4586)); +#135641 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#135642 = DIRECTION('',(0.,-1.,0.)); +#135643 = ADVANCED_FACE('',(#135644),#135661,.T.); +#135644 = FACE_BOUND('',#135645,.T.); +#135645 = EDGE_LOOP('',(#135646,#135652,#135653,#135654,#135660)); +#135646 = ORIENTED_EDGE('',*,*,#135647,.T.); +#135647 = EDGE_CURVE('',#135399,#135555,#135648,.T.); +#135648 = LINE('',#135649,#135650); +#135649 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135650 = VECTOR('',#135651,1.); +#135651 = DIRECTION('',(1.,0.,0.)); +#135652 = ORIENTED_EDGE('',*,*,#135552,.F.); +#135653 = ORIENTED_EDGE('',*,*,#135633,.T.); +#135654 = ORIENTED_EDGE('',*,*,#135655,.F.); +#135655 = EDGE_CURVE('',#135407,#135626,#135656,.T.); +#135656 = LINE('',#135657,#135658); +#135657 = CARTESIAN_POINT('',(8.9,-0.52125,-3.2586)); +#135658 = VECTOR('',#135659,1.); +#135659 = DIRECTION('',(1.,0.,0.)); +#135660 = ORIENTED_EDGE('',*,*,#135406,.T.); +#135661 = PLANE('',#135662); +#135662 = AXIS2_PLACEMENT_3D('',#135663,#135664,#135665); +#135663 = CARTESIAN_POINT('',(8.9,-0.52125,-3.2586)); +#135664 = DIRECTION('',(0.,-1.,0.)); +#135665 = DIRECTION('',(1.,0.,0.)); +#135666 = ADVANCED_FACE('',(#135667),#135678,.T.); +#135667 = FACE_BOUND('',#135668,.T.); +#135668 = EDGE_LOOP('',(#135669,#135675,#135676,#135677)); +#135669 = ORIENTED_EDGE('',*,*,#135670,.F.); +#135670 = EDGE_CURVE('',#135415,#135618,#135671,.T.); +#135671 = LINE('',#135672,#135673); +#135672 = CARTESIAN_POINT('',(8.9,0.52125,-3.2586)); +#135673 = VECTOR('',#135674,1.); +#135674 = DIRECTION('',(1.,0.,0.)); +#135675 = ORIENTED_EDGE('',*,*,#135414,.T.); +#135676 = ORIENTED_EDGE('',*,*,#135655,.T.); +#135677 = ORIENTED_EDGE('',*,*,#135625,.F.); +#135678 = PLANE('',#135679); +#135679 = AXIS2_PLACEMENT_3D('',#135680,#135681,#135682); +#135680 = CARTESIAN_POINT('',(8.9,0.52125,-3.2586)); +#135681 = DIRECTION('',(0.,0.,1.)); +#135682 = DIRECTION('',(0.,-1.,0.)); +#135683 = ADVANCED_FACE('',(#135684),#135696,.T.); +#135684 = FACE_BOUND('',#135685,.T.); +#135685 = EDGE_LOOP('',(#135686,#135687,#135688,#135689,#135695)); +#135686 = ORIENTED_EDGE('',*,*,#135670,.T.); +#135687 = ORIENTED_EDGE('',*,*,#135617,.T.); +#135688 = ORIENTED_EDGE('',*,*,#135570,.F.); +#135689 = ORIENTED_EDGE('',*,*,#135690,.F.); +#135690 = EDGE_CURVE('',#135423,#135563,#135691,.T.); +#135691 = LINE('',#135692,#135693); +#135692 = CARTESIAN_POINT('',(8.9,0.52125,-3.9541)); +#135693 = VECTOR('',#135694,1.); +#135694 = DIRECTION('',(1.,0.,0.)); +#135695 = ORIENTED_EDGE('',*,*,#135422,.T.); +#135696 = PLANE('',#135697); +#135697 = AXIS2_PLACEMENT_3D('',#135698,#135699,#135700); +#135698 = CARTESIAN_POINT('',(8.9,0.52125,-3.9541)); +#135699 = DIRECTION('',(0.,1.,0.)); +#135700 = DIRECTION('',(0.,-0.,1.)); +#135701 = ADVANCED_FACE('',(#135702),#135722,.T.); +#135702 = FACE_BOUND('',#135703,.T.); +#135703 = EDGE_LOOP('',(#135704,#135705,#135706,#135714,#135720,#135721) + ); +#135704 = ORIENTED_EDGE('',*,*,#135562,.F.); +#135705 = ORIENTED_EDGE('',*,*,#135647,.F.); +#135706 = ORIENTED_EDGE('',*,*,#135707,.T.); +#135707 = EDGE_CURVE('',#135399,#135708,#135710,.T.); +#135708 = VERTEX_POINT('',#135709); +#135709 = CARTESIAN_POINT('',(8.7,-0.52125,-3.9541)); +#135710 = LINE('',#135711,#135712); +#135711 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135712 = VECTOR('',#135713,1.); +#135713 = DIRECTION('',(-1.,0.,0.)); +#135714 = ORIENTED_EDGE('',*,*,#135715,.F.); +#135715 = EDGE_CURVE('',#135445,#135708,#135716,.T.); +#135716 = LINE('',#135717,#135718); +#135717 = CARTESIAN_POINT('',(8.7,0.52125,-3.9541)); +#135718 = VECTOR('',#135719,1.); +#135719 = DIRECTION('',(0.,-1.,0.)); +#135720 = ORIENTED_EDGE('',*,*,#135444,.F.); +#135721 = ORIENTED_EDGE('',*,*,#135690,.T.); +#135722 = PLANE('',#135723); +#135723 = AXIS2_PLACEMENT_3D('',#135724,#135725,#135726); +#135724 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135725 = DIRECTION('',(0.,0.,-1.)); +#135726 = DIRECTION('',(-1.,0.,0.)); +#135727 = ADVANCED_FACE('',(#135728),#135739,.T.); +#135728 = FACE_BOUND('',#135729,.T.); +#135729 = EDGE_LOOP('',(#135730,#135731,#135737,#135738)); +#135730 = ORIENTED_EDGE('',*,*,#135715,.T.); +#135731 = ORIENTED_EDGE('',*,*,#135732,.T.); +#135732 = EDGE_CURVE('',#135708,#135493,#135733,.T.); +#135733 = LINE('',#135734,#135735); +#135734 = CARTESIAN_POINT('',(8.7,-0.52125,-3.9541)); +#135735 = VECTOR('',#135736,1.); +#135736 = DIRECTION('',(0.,0.,-1.)); +#135737 = ORIENTED_EDGE('',*,*,#135492,.T.); +#135738 = ORIENTED_EDGE('',*,*,#135452,.T.); +#135739 = PLANE('',#135740); +#135740 = AXIS2_PLACEMENT_3D('',#135741,#135742,#135743); +#135741 = CARTESIAN_POINT('',(8.7,4.75,0.)); +#135742 = DIRECTION('',(1.,0.,0.)); +#135743 = DIRECTION('',(0.,-1.,0.)); +#135744 = ADVANCED_FACE('',(#135745),#135751,.F.); +#135745 = FACE_BOUND('',#135746,.T.); +#135746 = EDGE_LOOP('',(#135747,#135748,#135749,#135750)); +#135747 = ORIENTED_EDGE('',*,*,#135500,.T.); +#135748 = ORIENTED_EDGE('',*,*,#135732,.F.); +#135749 = ORIENTED_EDGE('',*,*,#135707,.F.); +#135750 = ORIENTED_EDGE('',*,*,#135398,.T.); +#135751 = PLANE('',#135752); +#135752 = AXIS2_PLACEMENT_3D('',#135753,#135754,#135755); +#135753 = CARTESIAN_POINT('',(8.9,-0.52125,-3.9541)); +#135754 = DIRECTION('',(0.,-1.,0.)); +#135755 = DIRECTION('',(1.,0.,0.)); +#135756 = ADVANCED_FACE('',(#135757),#135775,.T.); +#135757 = FACE_BOUND('',#135758,.T.); +#135758 = EDGE_LOOP('',(#135759,#135760,#135761,#135769)); +#135759 = ORIENTED_EDGE('',*,*,#135602,.F.); +#135760 = ORIENTED_EDGE('',*,*,#135528,.F.); +#135761 = ORIENTED_EDGE('',*,*,#135762,.T.); +#135762 = EDGE_CURVE('',#135521,#135763,#135765,.T.); +#135763 = VERTEX_POINT('',#135764); +#135764 = CARTESIAN_POINT('',(9.3,0.52125,-6.2414)); +#135765 = LINE('',#135766,#135767); +#135766 = CARTESIAN_POINT('',(9.3,-0.52125,-6.2414)); +#135767 = VECTOR('',#135768,1.); +#135768 = DIRECTION('',(0.,1.,0.)); +#135769 = ORIENTED_EDGE('',*,*,#135770,.F.); +#135770 = EDGE_CURVE('',#135593,#135763,#135771,.T.); +#135771 = LINE('',#135772,#135773); +#135772 = CARTESIAN_POINT('',(9.7,0.52125,-5.8414)); +#135773 = VECTOR('',#135774,1.); +#135774 = DIRECTION('',(-0.707106781187,-0.,-0.707106781187)); +#135775 = PLANE('',#135776); +#135776 = AXIS2_PLACEMENT_3D('',#135777,#135778,#135779); +#135777 = CARTESIAN_POINT('',(9.5,0.,-6.0414)); +#135778 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#135779 = DIRECTION('',(0.,1.,0.)); +#135780 = ADVANCED_FACE('',(#135781),#135793,.T.); +#135781 = FACE_BOUND('',#135782,.T.); +#135782 = EDGE_LOOP('',(#135783,#135784,#135785,#135786,#135792)); +#135783 = ORIENTED_EDGE('',*,*,#135485,.T.); +#135784 = ORIENTED_EDGE('',*,*,#135592,.F.); +#135785 = ORIENTED_EDGE('',*,*,#135770,.T.); +#135786 = ORIENTED_EDGE('',*,*,#135787,.F.); +#135787 = EDGE_CURVE('',#135373,#135763,#135788,.T.); +#135788 = LINE('',#135789,#135790); +#135789 = CARTESIAN_POINT('',(8.9,0.52125,-6.2414)); +#135790 = VECTOR('',#135791,1.); +#135791 = DIRECTION('',(1.,0.,0.)); +#135792 = ORIENTED_EDGE('',*,*,#135372,.T.); +#135793 = PLANE('',#135794); +#135794 = AXIS2_PLACEMENT_3D('',#135795,#135796,#135797); +#135795 = CARTESIAN_POINT('',(8.9,0.52125,-6.2414)); +#135796 = DIRECTION('',(0.,1.,0.)); +#135797 = DIRECTION('',(0.,-0.,1.)); +#135798 = ADVANCED_FACE('',(#135799),#135805,.T.); +#135799 = FACE_BOUND('',#135800,.T.); +#135800 = EDGE_LOOP('',(#135801,#135802,#135803,#135804)); +#135801 = ORIENTED_EDGE('',*,*,#135520,.F.); +#135802 = ORIENTED_EDGE('',*,*,#135382,.T.); +#135803 = ORIENTED_EDGE('',*,*,#135787,.T.); +#135804 = ORIENTED_EDGE('',*,*,#135762,.F.); +#135805 = PLANE('',#135806); +#135806 = AXIS2_PLACEMENT_3D('',#135807,#135808,#135809); +#135807 = CARTESIAN_POINT('',(8.9,-0.52125,-6.2414)); +#135808 = DIRECTION('',(0.,0.,-1.)); +#135809 = DIRECTION('',(-1.,0.,0.)); +#135810 = ADVANCED_FACE('',(#135811),#135871,.T.); +#135811 = FACE_BOUND('',#135812,.T.); +#135812 = EDGE_LOOP('',(#135813,#135814,#135820,#135821,#135829,#135837, + #135843,#135844,#135852,#135860,#135866,#135867,#135868,#135869, + #135870)); +#135813 = ORIENTED_EDGE('',*,*,#129789,.T.); +#135814 = ORIENTED_EDGE('',*,*,#135815,.T.); +#135815 = EDGE_CURVE('',#129781,#129515,#135816,.T.); +#135816 = LINE('',#135817,#135818); +#135817 = CARTESIAN_POINT('',(8.9,-4.75,-2.5)); +#135818 = VECTOR('',#135819,1.); +#135819 = DIRECTION('',(-1.,0.,0.)); +#135820 = ORIENTED_EDGE('',*,*,#129514,.T.); +#135821 = ORIENTED_EDGE('',*,*,#135822,.T.); +#135822 = EDGE_CURVE('',#129507,#135823,#135825,.T.); +#135823 = VERTEX_POINT('',#135824); +#135824 = CARTESIAN_POINT('',(7.875,-4.75,-2.6904)); +#135825 = LINE('',#135826,#135827); +#135826 = CARTESIAN_POINT('',(6.575,-4.75,-2.6904)); +#135827 = VECTOR('',#135828,1.); +#135828 = DIRECTION('',(1.,0.,0.)); +#135829 = ORIENTED_EDGE('',*,*,#135830,.F.); +#135830 = EDGE_CURVE('',#135831,#135823,#135833,.T.); +#135831 = VERTEX_POINT('',#135832); +#135832 = CARTESIAN_POINT('',(7.875,-4.75,-2.9904)); +#135833 = LINE('',#135834,#135835); +#135834 = CARTESIAN_POINT('',(7.875,-4.75,-2.9904)); +#135835 = VECTOR('',#135836,1.); +#135836 = DIRECTION('',(0.,0.,1.)); +#135837 = ORIENTED_EDGE('',*,*,#135838,.F.); +#135838 = EDGE_CURVE('',#129483,#135831,#135839,.T.); +#135839 = LINE('',#135840,#135841); +#135840 = CARTESIAN_POINT('',(6.575,-4.75,-2.9904)); +#135841 = VECTOR('',#135842,1.); +#135842 = DIRECTION('',(1.,0.,0.)); +#135843 = ORIENTED_EDGE('',*,*,#129482,.T.); +#135844 = ORIENTED_EDGE('',*,*,#135845,.T.); +#135845 = EDGE_CURVE('',#129475,#135846,#135848,.T.); +#135846 = VERTEX_POINT('',#135847); +#135847 = CARTESIAN_POINT('',(7.875,-4.75,-6.5096)); +#135848 = LINE('',#135849,#135850); +#135849 = CARTESIAN_POINT('',(6.575,-4.75,-6.5096)); +#135850 = VECTOR('',#135851,1.); +#135851 = DIRECTION('',(1.,0.,0.)); +#135852 = ORIENTED_EDGE('',*,*,#135853,.F.); +#135853 = EDGE_CURVE('',#135854,#135846,#135856,.T.); +#135854 = VERTEX_POINT('',#135855); +#135855 = CARTESIAN_POINT('',(7.875,-4.75,-6.8096)); +#135856 = LINE('',#135857,#135858); +#135857 = CARTESIAN_POINT('',(7.875,-4.75,-6.8096)); +#135858 = VECTOR('',#135859,1.); +#135859 = DIRECTION('',(0.,0.,1.)); +#135860 = ORIENTED_EDGE('',*,*,#135861,.F.); +#135861 = EDGE_CURVE('',#129451,#135854,#135862,.T.); +#135862 = LINE('',#135863,#135864); +#135863 = CARTESIAN_POINT('',(6.575,-4.75,-6.8096)); +#135864 = VECTOR('',#135865,1.); +#135865 = DIRECTION('',(1.,0.,0.)); +#135866 = ORIENTED_EDGE('',*,*,#129450,.T.); +#135867 = ORIENTED_EDGE('',*,*,#129417,.T.); +#135868 = ORIENTED_EDGE('',*,*,#129393,.T.); +#135869 = ORIENTED_EDGE('',*,*,#128837,.T.); +#135870 = ORIENTED_EDGE('',*,*,#128815,.F.); +#135871 = PLANE('',#135872); +#135872 = AXIS2_PLACEMENT_3D('',#135873,#135874,#135875); +#135873 = CARTESIAN_POINT('',(0.,-4.75,0.)); +#135874 = DIRECTION('',(0.,-1.,0.)); +#135875 = DIRECTION('',(1.,0.,0.)); +#135876 = ADVANCED_FACE('',(#135877),#135895,.F.); +#135877 = FACE_BOUND('',#135878,.T.); +#135878 = EDGE_LOOP('',(#135879,#135887,#135893,#135894)); +#135879 = ORIENTED_EDGE('',*,*,#135880,.T.); +#135880 = EDGE_CURVE('',#135854,#135881,#135883,.T.); +#135881 = VERTEX_POINT('',#135882); +#135882 = CARTESIAN_POINT('',(7.875,-4.45,-6.8096)); +#135883 = LINE('',#135884,#135885); +#135884 = CARTESIAN_POINT('',(7.875,-4.75,-6.8096)); +#135885 = VECTOR('',#135886,1.); +#135886 = DIRECTION('',(0.,1.,0.)); +#135887 = ORIENTED_EDGE('',*,*,#135888,.F.); +#135888 = EDGE_CURVE('',#129459,#135881,#135889,.T.); +#135889 = LINE('',#135890,#135891); +#135890 = CARTESIAN_POINT('',(6.575,-4.45,-6.8096)); +#135891 = VECTOR('',#135892,1.); +#135892 = DIRECTION('',(1.,0.,0.)); +#135893 = ORIENTED_EDGE('',*,*,#129458,.F.); +#135894 = ORIENTED_EDGE('',*,*,#135861,.T.); +#135895 = PLANE('',#135896); +#135896 = AXIS2_PLACEMENT_3D('',#135897,#135898,#135899); +#135897 = CARTESIAN_POINT('',(6.575,-4.75,-6.8096)); +#135898 = DIRECTION('',(0.,0.,-1.)); +#135899 = DIRECTION('',(-1.,0.,0.)); +#135900 = ADVANCED_FACE('',(#135901),#135919,.T.); +#135901 = FACE_BOUND('',#135902,.T.); +#135902 = EDGE_LOOP('',(#135903,#135904,#135912,#135918)); +#135903 = ORIENTED_EDGE('',*,*,#135888,.T.); +#135904 = ORIENTED_EDGE('',*,*,#135905,.T.); +#135905 = EDGE_CURVE('',#135881,#135906,#135908,.T.); +#135906 = VERTEX_POINT('',#135907); +#135907 = CARTESIAN_POINT('',(7.875,-4.45,-6.5096)); +#135908 = LINE('',#135909,#135910); +#135909 = CARTESIAN_POINT('',(7.875,-4.45,-6.8096)); +#135910 = VECTOR('',#135911,1.); +#135911 = DIRECTION('',(0.,0.,1.)); +#135912 = ORIENTED_EDGE('',*,*,#135913,.T.); +#135913 = EDGE_CURVE('',#135906,#129467,#135914,.T.); +#135914 = LINE('',#135915,#135916); +#135915 = CARTESIAN_POINT('',(7.875,-4.45,-6.5096)); +#135916 = VECTOR('',#135917,1.); +#135917 = DIRECTION('',(-1.,0.,0.)); +#135918 = ORIENTED_EDGE('',*,*,#129466,.F.); +#135919 = PLANE('',#135920); +#135920 = AXIS2_PLACEMENT_3D('',#135921,#135922,#135923); +#135921 = CARTESIAN_POINT('',(0.,-4.45,0.)); +#135922 = DIRECTION('',(0.,-1.,0.)); +#135923 = DIRECTION('',(1.,0.,0.)); +#135924 = ADVANCED_FACE('',(#135925),#135950,.T.); +#135925 = FACE_BOUND('',#135926,.T.); +#135926 = EDGE_LOOP('',(#135927,#135935,#135943,#135949)); +#135927 = ORIENTED_EDGE('',*,*,#135928,.T.); +#135928 = EDGE_CURVE('',#129491,#135929,#135931,.T.); +#135929 = VERTEX_POINT('',#135930); +#135930 = CARTESIAN_POINT('',(7.875,-4.45,-2.9904)); +#135931 = LINE('',#135932,#135933); +#135932 = CARTESIAN_POINT('',(6.575,-4.45,-2.9904)); +#135933 = VECTOR('',#135934,1.); +#135934 = DIRECTION('',(1.,0.,0.)); +#135935 = ORIENTED_EDGE('',*,*,#135936,.T.); +#135936 = EDGE_CURVE('',#135929,#135937,#135939,.T.); +#135937 = VERTEX_POINT('',#135938); +#135938 = CARTESIAN_POINT('',(7.875,-4.45,-2.6904)); +#135939 = LINE('',#135940,#135941); +#135940 = CARTESIAN_POINT('',(7.875,-4.45,-2.9904)); +#135941 = VECTOR('',#135942,1.); +#135942 = DIRECTION('',(0.,0.,1.)); +#135943 = ORIENTED_EDGE('',*,*,#135944,.T.); +#135944 = EDGE_CURVE('',#135937,#129499,#135945,.T.); +#135945 = LINE('',#135946,#135947); +#135946 = CARTESIAN_POINT('',(7.875,-4.45,-2.6904)); +#135947 = VECTOR('',#135948,1.); +#135948 = DIRECTION('',(-1.,0.,0.)); +#135949 = ORIENTED_EDGE('',*,*,#129498,.F.); +#135950 = PLANE('',#135951); +#135951 = AXIS2_PLACEMENT_3D('',#135952,#135953,#135954); +#135952 = CARTESIAN_POINT('',(0.,-4.45,0.)); +#135953 = DIRECTION('',(0.,-1.,0.)); +#135954 = DIRECTION('',(1.,0.,0.)); +#135955 = ADVANCED_FACE('',(#135956),#135967,.F.); +#135956 = FACE_BOUND('',#135957,.T.); +#135957 = EDGE_LOOP('',(#135958,#135959,#135960,#135966)); +#135958 = ORIENTED_EDGE('',*,*,#129474,.T.); +#135959 = ORIENTED_EDGE('',*,*,#135913,.F.); +#135960 = ORIENTED_EDGE('',*,*,#135961,.F.); +#135961 = EDGE_CURVE('',#135846,#135906,#135962,.T.); +#135962 = LINE('',#135963,#135964); +#135963 = CARTESIAN_POINT('',(7.875,-4.75,-6.5096)); +#135964 = VECTOR('',#135965,1.); +#135965 = DIRECTION('',(0.,1.,0.)); +#135966 = ORIENTED_EDGE('',*,*,#135845,.F.); +#135967 = PLANE('',#135968); +#135968 = AXIS2_PLACEMENT_3D('',#135969,#135970,#135971); +#135969 = CARTESIAN_POINT('',(7.875,-4.75,-6.5096)); +#135970 = DIRECTION('',(0.,0.,1.)); +#135971 = DIRECTION('',(0.,-1.,0.)); +#135972 = ADVANCED_FACE('',(#135973),#135979,.F.); +#135973 = FACE_BOUND('',#135974,.T.); +#135974 = EDGE_LOOP('',(#135975,#135976,#135977,#135978)); +#135975 = ORIENTED_EDGE('',*,*,#135961,.T.); +#135976 = ORIENTED_EDGE('',*,*,#135905,.F.); +#135977 = ORIENTED_EDGE('',*,*,#135880,.F.); +#135978 = ORIENTED_EDGE('',*,*,#135853,.T.); +#135979 = PLANE('',#135980); +#135980 = AXIS2_PLACEMENT_3D('',#135981,#135982,#135983); +#135981 = CARTESIAN_POINT('',(7.875,-4.75,-6.8096)); +#135982 = DIRECTION('',(1.,0.,0.)); +#135983 = DIRECTION('',(0.,-1.,0.)); +#135984 = ADVANCED_FACE('',(#135985),#135996,.F.); +#135985 = FACE_BOUND('',#135986,.T.); +#135986 = EDGE_LOOP('',(#135987,#135988,#135989,#135995)); +#135987 = ORIENTED_EDGE('',*,*,#129506,.T.); +#135988 = ORIENTED_EDGE('',*,*,#135944,.F.); +#135989 = ORIENTED_EDGE('',*,*,#135990,.F.); +#135990 = EDGE_CURVE('',#135823,#135937,#135991,.T.); +#135991 = LINE('',#135992,#135993); +#135992 = CARTESIAN_POINT('',(7.875,-4.75,-2.6904)); +#135993 = VECTOR('',#135994,1.); +#135994 = DIRECTION('',(0.,1.,0.)); +#135995 = ORIENTED_EDGE('',*,*,#135822,.F.); +#135996 = PLANE('',#135997); +#135997 = AXIS2_PLACEMENT_3D('',#135998,#135999,#136000); +#135998 = CARTESIAN_POINT('',(7.875,-4.75,-2.6904)); +#135999 = DIRECTION('',(0.,0.,1.)); +#136000 = DIRECTION('',(0.,-1.,0.)); +#136001 = ADVANCED_FACE('',(#136002),#136013,.F.); +#136002 = FACE_BOUND('',#136003,.T.); +#136003 = EDGE_LOOP('',(#136004,#136005,#136006,#136012)); +#136004 = ORIENTED_EDGE('',*,*,#135990,.T.); +#136005 = ORIENTED_EDGE('',*,*,#135936,.F.); +#136006 = ORIENTED_EDGE('',*,*,#136007,.F.); +#136007 = EDGE_CURVE('',#135831,#135929,#136008,.T.); +#136008 = LINE('',#136009,#136010); +#136009 = CARTESIAN_POINT('',(7.875,-4.75,-2.9904)); +#136010 = VECTOR('',#136011,1.); +#136011 = DIRECTION('',(0.,1.,0.)); +#136012 = ORIENTED_EDGE('',*,*,#135830,.T.); +#136013 = PLANE('',#136014); +#136014 = AXIS2_PLACEMENT_3D('',#136015,#136016,#136017); +#136015 = CARTESIAN_POINT('',(7.875,-4.75,-2.9904)); +#136016 = DIRECTION('',(1.,0.,0.)); +#136017 = DIRECTION('',(0.,-1.,0.)); +#136018 = ADVANCED_FACE('',(#136019),#136025,.F.); +#136019 = FACE_BOUND('',#136020,.T.); +#136020 = EDGE_LOOP('',(#136021,#136022,#136023,#136024)); +#136021 = ORIENTED_EDGE('',*,*,#136007,.T.); +#136022 = ORIENTED_EDGE('',*,*,#135928,.F.); +#136023 = ORIENTED_EDGE('',*,*,#129490,.F.); +#136024 = ORIENTED_EDGE('',*,*,#135838,.T.); +#136025 = PLANE('',#136026); +#136026 = AXIS2_PLACEMENT_3D('',#136027,#136028,#136029); +#136027 = CARTESIAN_POINT('',(6.575,-4.75,-2.9904)); +#136028 = DIRECTION('',(0.,0.,-1.)); +#136029 = DIRECTION('',(-1.,0.,0.)); +#136030 = ADVANCED_FACE('',(#136031),#136042,.T.); +#136031 = FACE_BOUND('',#136032,.T.); +#136032 = EDGE_LOOP('',(#136033,#136034,#136035,#136041)); +#136033 = ORIENTED_EDGE('',*,*,#135815,.F.); +#136034 = ORIENTED_EDGE('',*,*,#129780,.F.); +#136035 = ORIENTED_EDGE('',*,*,#136036,.T.); +#136036 = EDGE_CURVE('',#129773,#129523,#136037,.T.); +#136037 = LINE('',#136038,#136039); +#136038 = CARTESIAN_POINT('',(8.9,-2.15,0.1)); +#136039 = VECTOR('',#136040,1.); +#136040 = DIRECTION('',(-1.,0.,0.)); +#136041 = ORIENTED_EDGE('',*,*,#129522,.F.); +#136042 = CYLINDRICAL_SURFACE('',#136043,2.6); +#136043 = AXIS2_PLACEMENT_3D('',#136044,#136045,#136046); +#136044 = CARTESIAN_POINT('',(12.26153,-2.15,-2.5)); +#136045 = DIRECTION('',(-1.,0.,0.)); +#136046 = DIRECTION('',(0.,-1.,0.)); +#136047 = ADVANCED_FACE('',(#136048),#136054,.T.); +#136048 = FACE_BOUND('',#136049,.T.); +#136049 = EDGE_LOOP('',(#136050,#136051,#136052,#136053)); +#136050 = ORIENTED_EDGE('',*,*,#129772,.F.); +#136051 = ORIENTED_EDGE('',*,*,#129748,.F.); +#136052 = ORIENTED_EDGE('',*,*,#129531,.T.); +#136053 = ORIENTED_EDGE('',*,*,#136036,.F.); +#136054 = PLANE('',#136055); +#136055 = AXIS2_PLACEMENT_3D('',#136056,#136057,#136058); +#136056 = CARTESIAN_POINT('',(8.9,4.75,0.1)); +#136057 = DIRECTION('',(0.,0.,1.)); +#136058 = DIRECTION('',(0.,-1.,0.)); +#136059 = MANIFOLD_SOLID_BREP('',#136060); +#136060 = CLOSED_SHELL('',(#136061,#136103,#136136,#136215,#136248, + #136292,#136328,#136370,#136462,#136495,#136551,#136879,#136983, + #137201,#137299,#137330,#138017,#138043,#138164,#138269,#138612, + #138716,#138748,#138780,#138798,#138824,#138870,#139013,#139035, + #139047,#139069,#139081,#139103,#139115,#139152,#139183,#139287, + #139310,#139327,#139344,#139361,#139394,#139427,#139467,#139491, + #139515,#139557,#139581,#139598,#139684,#139714,#139746,#139770, + #139882,#140000,#140109,#140131,#140153,#140187,#140314,#140345, + #140369,#140435,#140457,#140474,#140491,#140508,#140520,#140532, + #140565,#140602,#140633,#140682,#140723,#140755,#140779,#140803, + #140828,#140852,#140870,#140902,#140922,#140939,#140974,#141006, + #141016,#141048,#141058,#141072,#141176,#141200,#141231,#141262, + #141286,#141341,#141365,#141396,#141427,#141458,#141482,#141516, + #141533,#141550,#141562,#141593,#141634,#141658,#141685,#141702, + #141714,#141733,#141745,#141776,#141812,#141836,#141863,#141880, + #141892,#141923,#141964,#141988,#142015,#142032,#142044,#142061, + #142169,#142200,#142293,#142404,#142435,#142459,#142483,#142539, + #142570,#142601,#142642,#142706,#142723,#142745,#142810,#142827, + #142866,#142888,#142905,#142986,#142998,#143028,#143249,#143266, + #143283,#143295,#143307,#143324,#143341,#143358,#143375,#143387, + #143399,#143438,#143466,#143484,#143496,#143513,#143526,#143546, + #143610,#143709,#143741,#143775,#143791,#143817,#143835,#143847, + #143881,#143899,#143921,#143933,#143957,#144009,#144021,#144038, + #144055,#144072,#144084,#144096,#144113,#144130,#144147,#144164, + #144181,#144204,#144221,#144238,#144250,#144262,#144279,#144298, + #144315,#144332,#144345,#144363,#144375,#144399,#144455,#144472, + #144496,#144513,#144530,#144542,#144559,#144583,#144600,#144619, + #144631,#144648,#144660,#144854,#144868,#144890,#144975,#144994, + #145079,#145096,#145181,#145200,#145280,#145292,#145323,#145354, + #145387,#145418,#145442,#145454,#145494,#145534,#145574,#145605, + #145636,#145660,#145684,#145696,#145708,#145739,#145770,#145794, + #145818,#145830,#145842,#145873,#145904,#145928,#145952,#145964, + #145976,#145988,#146005,#146022,#146039,#146056,#146068,#146090, + #146107,#146124,#146141,#146158,#146175,#146192,#146209,#146226, + #146243,#146260,#146277,#146294,#146311,#146328,#146345,#146362, + #146379,#146396,#146413,#146430,#146447,#146464,#146481,#146498, + #146515,#146532,#146549,#146566,#146583,#146600,#146617,#146634, + #146651,#146668,#146685,#146702,#146719,#146736,#146748,#146770, + #146787,#146804,#146821,#146838,#146855,#146872,#146889,#146906, + #146923,#146940,#146952,#146974,#146991,#147008,#147025,#147042, + #147059,#147076,#147093,#147110,#147127,#147144,#147161,#147178, + #147190,#147212,#147229,#147246,#147263,#147280,#147297,#147314, + #147331,#147348,#147365,#147382,#147394,#147416,#147433,#147450, + #147467,#147484,#147501,#147518,#147530,#147552,#147569)); +#136061 = ADVANCED_FACE('',(#136062),#136098,.T.); +#136062 = FACE_BOUND('',#136063,.T.); +#136063 = EDGE_LOOP('',(#136064,#136075,#136083,#136092)); +#136064 = ORIENTED_EDGE('',*,*,#136065,.T.); +#136065 = EDGE_CURVE('',#136066,#136068,#136070,.T.); +#136066 = VERTEX_POINT('',#136067); +#136067 = CARTESIAN_POINT('',(-6.,-1.56746061332,-4.7)); +#136068 = VERTEX_POINT('',#136069); +#136069 = CARTESIAN_POINT('',(-6.,1.56746061332,-4.7)); +#136070 = CIRCLE('',#136071,1.56746061332); +#136071 = AXIS2_PLACEMENT_3D('',#136072,#136073,#136074); +#136072 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#136073 = DIRECTION('',(-1.,0.,0.)); +#136074 = DIRECTION('',(-0.,-0.99834907198,-5.743805774631E-02)); +#136075 = ORIENTED_EDGE('',*,*,#136076,.T.); +#136076 = EDGE_CURVE('',#136068,#136077,#136079,.T.); +#136077 = VERTEX_POINT('',#136078); +#136078 = CARTESIAN_POINT('',(-7.1,1.56746061332,-4.7)); +#136079 = LINE('',#136080,#136081); +#136080 = CARTESIAN_POINT('',(-6.,1.56746061332,-4.7)); +#136081 = VECTOR('',#136082,1.); +#136082 = DIRECTION('',(-1.,0.,0.)); +#136083 = ORIENTED_EDGE('',*,*,#136084,.F.); +#136084 = EDGE_CURVE('',#136085,#136077,#136087,.T.); +#136085 = VERTEX_POINT('',#136086); +#136086 = CARTESIAN_POINT('',(-7.1,-1.56746061332,-4.7)); +#136087 = CIRCLE('',#136088,1.56746061332); +#136088 = AXIS2_PLACEMENT_3D('',#136089,#136090,#136091); +#136089 = CARTESIAN_POINT('',(-7.1,0.,-4.7)); +#136090 = DIRECTION('',(-1.,0.,0.)); +#136091 = DIRECTION('',(-0.,-0.99834907198,-5.74380577463E-02)); +#136092 = ORIENTED_EDGE('',*,*,#136093,.F.); +#136093 = EDGE_CURVE('',#136066,#136085,#136094,.T.); +#136094 = LINE('',#136095,#136096); +#136095 = CARTESIAN_POINT('',(-6.,-1.56746061332,-4.7)); +#136096 = VECTOR('',#136097,1.); +#136097 = DIRECTION('',(-1.,0.,0.)); +#136098 = CYLINDRICAL_SURFACE('',#136099,1.56746061332); +#136099 = AXIS2_PLACEMENT_3D('',#136100,#136101,#136102); +#136100 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#136101 = DIRECTION('',(-1.,0.,0.)); +#136102 = DIRECTION('',(0.,-1.,0.)); +#136103 = ADVANCED_FACE('',(#136104),#136131,.T.); +#136104 = FACE_BOUND('',#136105,.T.); +#136105 = EDGE_LOOP('',(#136106,#136115,#136116,#136125)); +#136106 = ORIENTED_EDGE('',*,*,#136107,.T.); +#136107 = EDGE_CURVE('',#136108,#136066,#136110,.T.); +#136108 = VERTEX_POINT('',#136109); +#136109 = CARTESIAN_POINT('',(-6.,-1.564872848673,-4.790031893223)); +#136110 = CIRCLE('',#136111,1.56746061332); +#136111 = AXIS2_PLACEMENT_3D('',#136112,#136113,#136114); +#136112 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#136113 = DIRECTION('',(-1.,0.,0.)); +#136114 = DIRECTION('',(-0.,-0.99834907198,-5.743805774631E-02)); +#136115 = ORIENTED_EDGE('',*,*,#136093,.T.); +#136116 = ORIENTED_EDGE('',*,*,#136117,.F.); +#136117 = EDGE_CURVE('',#136118,#136085,#136120,.T.); +#136118 = VERTEX_POINT('',#136119); +#136119 = CARTESIAN_POINT('',(-7.1,-1.564872848673,-4.790031893223)); +#136120 = CIRCLE('',#136121,1.56746061332); +#136121 = AXIS2_PLACEMENT_3D('',#136122,#136123,#136124); +#136122 = CARTESIAN_POINT('',(-7.1,0.,-4.7)); +#136123 = DIRECTION('',(-1.,0.,0.)); +#136124 = DIRECTION('',(-0.,-0.99834907198,-5.74380577463E-02)); +#136125 = ORIENTED_EDGE('',*,*,#136126,.F.); +#136126 = EDGE_CURVE('',#136108,#136118,#136127,.T.); +#136127 = LINE('',#136128,#136129); +#136128 = CARTESIAN_POINT('',(-6.,-1.564872848673,-4.790031893223)); +#136129 = VECTOR('',#136130,1.); +#136130 = DIRECTION('',(-1.,0.,0.)); +#136131 = CYLINDRICAL_SURFACE('',#136132,1.56746061332); +#136132 = AXIS2_PLACEMENT_3D('',#136133,#136134,#136135); +#136133 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#136134 = DIRECTION('',(-1.,0.,0.)); +#136135 = DIRECTION('',(0.,-1.,0.)); +#136136 = ADVANCED_FACE('',(#136137),#136210,.T.); +#136137 = FACE_BOUND('',#136138,.T.); +#136138 = EDGE_LOOP('',(#136139,#136150,#136158,#136167,#136176,#136184, + #136193,#136202)); +#136139 = ORIENTED_EDGE('',*,*,#136140,.F.); +#136140 = EDGE_CURVE('',#136141,#136143,#136145,.T.); +#136141 = VERTEX_POINT('',#136142); +#136142 = CARTESIAN_POINT('',(-1.765240886199E-16,-6.652771428572, + -7.330000000001)); +#136143 = VERTEX_POINT('',#136144); +#136144 = CARTESIAN_POINT('',(-1.344673821613,-7.575,-7.330000000001)); +#136145 = CIRCLE('',#136146,1.441428571429); +#136146 = AXIS2_PLACEMENT_3D('',#136147,#136148,#136149); +#136147 = CARTESIAN_POINT('',(0.,-8.0942,-7.330000000001)); +#136148 = DIRECTION('',(0.,0.,1.)); +#136149 = DIRECTION('',(3.426256811868E-05,0.999999999413,-0.)); +#136150 = ORIENTED_EDGE('',*,*,#136151,.T.); +#136151 = EDGE_CURVE('',#136141,#136152,#136154,.T.); +#136152 = VERTEX_POINT('',#136153); +#136153 = CARTESIAN_POINT('',(-3.367160199775E-07,-6.6442, + -7.450000000001)); +#136154 = LINE('',#136155,#136156); +#136155 = CARTESIAN_POINT('',(-1.718567492332E-16,-6.690883146905, + -6.796435943332)); +#136156 = VECTOR('',#136157,1.); +#136157 = DIRECTION('',(-8.725247171637E-18,7.12470499879E-02, + -0.997458699831)); +#136158 = ORIENTED_EDGE('',*,*,#136159,.T.); +#136159 = EDGE_CURVE('',#136152,#136160,#136162,.T.); +#136160 = VERTEX_POINT('',#136161); +#136161 = CARTESIAN_POINT('',(-1.45,-8.0942,-7.45)); +#136162 = CIRCLE('',#136163,1.45); +#136163 = AXIS2_PLACEMENT_3D('',#136164,#136165,#136166); +#136164 = CARTESIAN_POINT('',(0.,-8.0942,-7.45)); +#136165 = DIRECTION('',(0.,0.,1.)); +#136166 = DIRECTION('',(-2.32217944812E-07,1.,0.)); +#136167 = ORIENTED_EDGE('',*,*,#136168,.T.); +#136168 = EDGE_CURVE('',#136160,#136169,#136171,.T.); +#136169 = VERTEX_POINT('',#136170); +#136170 = CARTESIAN_POINT('',(0.,-9.5442,-7.45)); +#136171 = CIRCLE('',#136172,1.45); +#136172 = AXIS2_PLACEMENT_3D('',#136173,#136174,#136175); +#136173 = CARTESIAN_POINT('',(0.,-8.0942,-7.45)); +#136174 = DIRECTION('',(0.,0.,1.)); +#136175 = DIRECTION('',(-1.,0.,0.)); +#136176 = ORIENTED_EDGE('',*,*,#136177,.F.); +#136177 = EDGE_CURVE('',#136178,#136169,#136180,.T.); +#136178 = VERTEX_POINT('',#136179); +#136179 = CARTESIAN_POINT('',(0.,-9.45083394964,-6.142875294956)); +#136180 = LINE('',#136181,#136182); +#136181 = CARTESIAN_POINT('',(0.,-9.497516853095,-6.796435943332)); +#136182 = VECTOR('',#136183,1.); +#136183 = DIRECTION('',(0.,-7.12470499879E-02,-0.997458699831)); +#136184 = ORIENTED_EDGE('',*,*,#136185,.T.); +#136185 = EDGE_CURVE('',#136178,#136186,#136188,.T.); +#136186 = VERTEX_POINT('',#136187); +#136187 = CARTESIAN_POINT('',(-1.356036037781,-8.134473275071, + -6.142875294956)); +#136188 = CIRCLE('',#136189,1.35663394964); +#136189 = AXIS2_PLACEMENT_3D('',#136190,#136191,#136192); +#136190 = CARTESIAN_POINT('',(0.,-8.0942,-6.142875294956)); +#136191 = DIRECTION('',(0.,0.,-1.)); +#136192 = DIRECTION('',(1.,3.484246704599E-07,0.)); +#136193 = ORIENTED_EDGE('',*,*,#136194,.T.); +#136194 = EDGE_CURVE('',#136186,#136195,#136197,.T.); +#136195 = VERTEX_POINT('',#136196); +#136196 = CARTESIAN_POINT('',(-1.253350323409,-7.574999999879, + -6.142875294956)); +#136197 = CIRCLE('',#136198,1.35663394964); +#136198 = AXIS2_PLACEMENT_3D('',#136199,#136200,#136201); +#136199 = CARTESIAN_POINT('',(0.,-8.0942,-6.142875294956)); +#136200 = DIRECTION('',(0.,0.,-1.)); +#136201 = DIRECTION('',(1.,3.484246704599E-07,0.)); +#136202 = ORIENTED_EDGE('',*,*,#136203,.F.); +#136203 = EDGE_CURVE('',#136143,#136195,#136204,.T.); +#136204 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#136205,#136206,#136207, + #136208,#136209),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#136205 = CARTESIAN_POINT('',(-1.344673821613,-7.575,-7.330000000001)); +#136206 = CARTESIAN_POINT('',(-1.328828993352,-7.575,-7.123062405806)); +#136207 = CARTESIAN_POINT('',(-1.297762137788,-7.57499999998, + -6.718270804267)); +#136208 = CARTESIAN_POINT('',(-1.267945081216,-7.57500000004, + -6.3316460574)); +#136209 = CARTESIAN_POINT('',(-1.253350323409,-7.574999999879, + -6.142875294956)); +#136210 = CONICAL_SURFACE('',#136211,1.403316853095,7.130746478528E-02); +#136211 = AXIS2_PLACEMENT_3D('',#136212,#136213,#136214); +#136212 = CARTESIAN_POINT('',(0.,-8.0942,-6.796435943332)); +#136213 = DIRECTION('',(0.,0.,-1.)); +#136214 = DIRECTION('',(0.,-1.,0.)); +#136215 = ADVANCED_FACE('',(#136216),#136243,.T.); +#136216 = FACE_BOUND('',#136217,.T.); +#136217 = EDGE_LOOP('',(#136218,#136227,#136228,#136237)); +#136218 = ORIENTED_EDGE('',*,*,#136219,.T.); +#136219 = EDGE_CURVE('',#136220,#136178,#136222,.T.); +#136220 = VERTEX_POINT('',#136221); +#136221 = CARTESIAN_POINT('',(1.35663394964,-8.094199527315, + -6.142875294956)); +#136222 = CIRCLE('',#136223,1.35663394964); +#136223 = AXIS2_PLACEMENT_3D('',#136224,#136225,#136226); +#136224 = CARTESIAN_POINT('',(0.,-8.0942,-6.142875294956)); +#136225 = DIRECTION('',(0.,0.,-1.)); +#136226 = DIRECTION('',(1.,3.484246704599E-07,0.)); +#136227 = ORIENTED_EDGE('',*,*,#136177,.T.); +#136228 = ORIENTED_EDGE('',*,*,#136229,.T.); +#136229 = EDGE_CURVE('',#136169,#136230,#136232,.T.); +#136230 = VERTEX_POINT('',#136231); +#136231 = CARTESIAN_POINT('',(1.45,-8.0942,-7.450000000001)); +#136232 = CIRCLE('',#136233,1.45); +#136233 = AXIS2_PLACEMENT_3D('',#136234,#136235,#136236); +#136234 = CARTESIAN_POINT('',(0.,-8.0942,-7.45)); +#136235 = DIRECTION('',(0.,0.,1.)); +#136236 = DIRECTION('',(-1.,0.,0.)); +#136237 = ORIENTED_EDGE('',*,*,#136238,.F.); +#136238 = EDGE_CURVE('',#136220,#136230,#136239,.T.); +#136239 = LINE('',#136240,#136241); +#136240 = CARTESIAN_POINT('',(1.356633827699,-8.094199527235, + -6.142873590841)); +#136241 = VECTOR('',#136242,1.); +#136242 = DIRECTION('',(7.124705013655E-02,2.743939076761E-06, + -0.997458699816)); +#136243 = CONICAL_SURFACE('',#136244,1.403316853095,7.130746478528E-02); +#136244 = AXIS2_PLACEMENT_3D('',#136245,#136246,#136247); +#136245 = CARTESIAN_POINT('',(0.,-8.0942,-6.796435943332)); +#136246 = DIRECTION('',(0.,0.,-1.)); +#136247 = DIRECTION('',(0.,-1.,0.)); +#136248 = ADVANCED_FACE('',(#136249),#136287,.T.); +#136249 = FACE_BOUND('',#136250,.T.); +#136250 = EDGE_LOOP('',(#136251,#136262,#136269,#136270,#136271,#136280) + ); +#136251 = ORIENTED_EDGE('',*,*,#136252,.F.); +#136252 = EDGE_CURVE('',#136253,#136255,#136257,.T.); +#136253 = VERTEX_POINT('',#136254); +#136254 = CARTESIAN_POINT('',(-1.256334128644,-8.131512201545,-6.05)); +#136255 = VERTEX_POINT('',#136256); +#136256 = CARTESIAN_POINT('',(1.256334128644,-8.056887798455,-6.05)); +#136257 = CIRCLE('',#136258,1.256888079019); +#136258 = AXIS2_PLACEMENT_3D('',#136259,#136260,#136261); +#136259 = CARTESIAN_POINT('',(0.,-8.0942,-6.05)); +#136260 = DIRECTION('',(0.,0.,1.)); +#136261 = DIRECTION('',(-0.910693056204,0.41308371716,0.)); +#136262 = ORIENTED_EDGE('',*,*,#136263,.T.); +#136263 = EDGE_CURVE('',#136253,#136186,#136264,.T.); +#136264 = CIRCLE('',#136265,0.1); +#136265 = AXIS2_PLACEMENT_3D('',#136266,#136267,#136268); +#136266 = CARTESIAN_POINT('',(-1.256334128644,-8.131512201545,-6.15)); +#136267 = DIRECTION('',(2.968617665135E-02,-0.999559268336,0.)); +#136268 = DIRECTION('',(0.999559268336,2.968617665135E-02,0.)); +#136269 = ORIENTED_EDGE('',*,*,#136185,.F.); +#136270 = ORIENTED_EDGE('',*,*,#136219,.F.); +#136271 = ORIENTED_EDGE('',*,*,#136272,.F.); +#136272 = EDGE_CURVE('',#136273,#136220,#136275,.T.); +#136273 = VERTEX_POINT('',#136274); +#136274 = CARTESIAN_POINT('',(1.356036037781,-8.053926724929, + -6.142875294959)); +#136275 = CIRCLE('',#136276,1.35663394964); +#136276 = AXIS2_PLACEMENT_3D('',#136277,#136278,#136279); +#136277 = CARTESIAN_POINT('',(3.387290448131E-13,-8.0942,-6.142875294959 + )); +#136278 = DIRECTION('',(0.,0.,-1.)); +#136279 = DIRECTION('',(0.923867726991,0.382711932168,0.)); +#136280 = ORIENTED_EDGE('',*,*,#136281,.F.); +#136281 = EDGE_CURVE('',#136255,#136273,#136282,.T.); +#136282 = CIRCLE('',#136283,0.1); +#136283 = AXIS2_PLACEMENT_3D('',#136284,#136285,#136286); +#136284 = CARTESIAN_POINT('',(1.256334128644,-8.056887798455,-6.15)); +#136285 = DIRECTION('',(-2.968617665135E-02,0.999559268336,0.)); +#136286 = DIRECTION('',(-0.999559268336,-2.968617665135E-02,0.)); +#136287 = TOROIDAL_SURFACE('',#136288,1.256888079019,0.1); +#136288 = AXIS2_PLACEMENT_3D('',#136289,#136290,#136291); +#136289 = CARTESIAN_POINT('',(0.,-8.0942,-6.15)); +#136290 = DIRECTION('',(0.,0.,-1.)); +#136291 = DIRECTION('',(0.999559268336,2.968617665135E-02,0.)); +#136292 = ADVANCED_FACE('',(#136293),#136323,.T.); +#136293 = FACE_BOUND('',#136294,.T.); +#136294 = EDGE_LOOP('',(#136295,#136304,#136305,#136314)); +#136295 = ORIENTED_EDGE('',*,*,#136296,.F.); +#136296 = EDGE_CURVE('',#136255,#136297,#136299,.T.); +#136297 = VERTEX_POINT('',#136298); +#136298 = CARTESIAN_POINT('',(1.144639246556,-7.575000000007,-6.05)); +#136299 = CIRCLE('',#136300,1.256888079019); +#136300 = AXIS2_PLACEMENT_3D('',#136301,#136302,#136303); +#136301 = CARTESIAN_POINT('',(0.,-8.0942,-6.05)); +#136302 = DIRECTION('',(0.,0.,1.)); +#136303 = DIRECTION('',(-0.910693056204,0.41308371716,0.)); +#136304 = ORIENTED_EDGE('',*,*,#136281,.T.); +#136305 = ORIENTED_EDGE('',*,*,#136306,.F.); +#136306 = EDGE_CURVE('',#136307,#136273,#136309,.T.); +#136307 = VERTEX_POINT('',#136308); +#136308 = CARTESIAN_POINT('',(1.253350323413,-7.574999999889, + -6.142875294959)); +#136309 = CIRCLE('',#136310,1.35663394964); +#136310 = AXIS2_PLACEMENT_3D('',#136311,#136312,#136313); +#136311 = CARTESIAN_POINT('',(3.387290448131E-13,-8.0942,-6.142875294959 + )); +#136312 = DIRECTION('',(0.,0.,-1.)); +#136313 = DIRECTION('',(0.923867726991,0.382711932168,0.)); +#136314 = ORIENTED_EDGE('',*,*,#136315,.F.); +#136315 = EDGE_CURVE('',#136297,#136307,#136316,.T.); +#136316 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#136317,#136318,#136319, + #136320,#136321,#136322),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#136317 = CARTESIAN_POINT('',(1.144639246556,-7.575000000007,-6.05)); +#136318 = CARTESIAN_POINT('',(1.173685184268,-7.575,-6.050000000156)); +#136319 = CARTESIAN_POINT('',(1.200120313886,-7.575,-6.060348069696)); +#136320 = CARTESIAN_POINT('',(1.240298348929,-7.575,-6.095250645794)); +#136321 = CARTESIAN_POINT('',(1.251345346202,-7.575,-6.116942624857)); +#136322 = CARTESIAN_POINT('',(1.253350323413,-7.574999999889, + -6.142875294959)); +#136323 = TOROIDAL_SURFACE('',#136324,1.256888079019,0.1); +#136324 = AXIS2_PLACEMENT_3D('',#136325,#136326,#136327); +#136325 = CARTESIAN_POINT('',(0.,-8.0942,-6.15)); +#136326 = DIRECTION('',(0.,0.,-1.)); +#136327 = DIRECTION('',(0.999559268336,2.968617665135E-02,0.)); +#136328 = ADVANCED_FACE('',(#136329),#136365,.F.); +#136329 = FACE_BOUND('',#136330,.F.); +#136330 = EDGE_LOOP('',(#136331,#136341,#136350,#136358)); +#136331 = ORIENTED_EDGE('',*,*,#136332,.T.); +#136332 = EDGE_CURVE('',#136333,#136335,#136337,.T.); +#136333 = VERTEX_POINT('',#136334); +#136334 = CARTESIAN_POINT('',(0.93674969976,0.75,-2.9)); +#136335 = VERTEX_POINT('',#136336); +#136336 = CARTESIAN_POINT('',(0.93674969976,0.75,8.25)); +#136337 = LINE('',#136338,#136339); +#136338 = CARTESIAN_POINT('',(0.93674969976,0.75,-2.9)); +#136339 = VECTOR('',#136340,1.); +#136340 = DIRECTION('',(0.,0.,1.)); +#136341 = ORIENTED_EDGE('',*,*,#136342,.T.); +#136342 = EDGE_CURVE('',#136335,#136343,#136345,.T.); +#136343 = VERTEX_POINT('',#136344); +#136344 = CARTESIAN_POINT('',(1.2,1.224646799147E-14,8.25)); +#136345 = CIRCLE('',#136346,1.2); +#136346 = AXIS2_PLACEMENT_3D('',#136347,#136348,#136349); +#136347 = CARTESIAN_POINT('',(0.,1.224646799147E-14,8.25)); +#136348 = DIRECTION('',(0.,0.,-1.)); +#136349 = DIRECTION('',(0.7806247498,0.625,0.)); +#136350 = ORIENTED_EDGE('',*,*,#136351,.F.); +#136351 = EDGE_CURVE('',#136352,#136343,#136354,.T.); +#136352 = VERTEX_POINT('',#136353); +#136353 = CARTESIAN_POINT('',(1.2,1.224646799147E-14,-2.9)); +#136354 = LINE('',#136355,#136356); +#136355 = CARTESIAN_POINT('',(1.2,1.224646799147E-14,-2.9)); +#136356 = VECTOR('',#136357,1.); +#136357 = DIRECTION('',(0.,0.,1.)); +#136358 = ORIENTED_EDGE('',*,*,#136359,.T.); +#136359 = EDGE_CURVE('',#136352,#136333,#136360,.T.); +#136360 = CIRCLE('',#136361,1.2); +#136361 = AXIS2_PLACEMENT_3D('',#136362,#136363,#136364); +#136362 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#136363 = DIRECTION('',(0.,0.,1.)); +#136364 = DIRECTION('',(0.7806247498,-0.625,0.)); +#136365 = CYLINDRICAL_SURFACE('',#136366,1.2); +#136366 = AXIS2_PLACEMENT_3D('',#136367,#136368,#136369); +#136367 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#136368 = DIRECTION('',(0.,0.,1.)); +#136369 = DIRECTION('',(1.,0.,-0.)); +#136370 = ADVANCED_FACE('',(#136371),#136457,.T.); +#136371 = FACE_BOUND('',#136372,.T.); +#136372 = EDGE_LOOP('',(#136373,#136383,#136391,#136400,#136408,#136417, + #136425,#136434,#136442,#136450)); +#136373 = ORIENTED_EDGE('',*,*,#136374,.T.); +#136374 = EDGE_CURVE('',#136375,#136377,#136379,.T.); +#136375 = VERTEX_POINT('',#136376); +#136376 = CARTESIAN_POINT('',(-2.,0.,-3.9)); +#136377 = VERTEX_POINT('',#136378); +#136378 = CARTESIAN_POINT('',(-2.,0.,-2.9)); +#136379 = LINE('',#136380,#136381); +#136380 = CARTESIAN_POINT('',(-2.,0.,-3.9)); +#136381 = VECTOR('',#136382,1.); +#136382 = DIRECTION('',(0.,0.,1.)); +#136383 = ORIENTED_EDGE('',*,*,#136384,.T.); +#136384 = EDGE_CURVE('',#136377,#136385,#136387,.T.); +#136385 = VERTEX_POINT('',#136386); +#136386 = CARTESIAN_POINT('',(-2.,2.449293598295E-16,7.45)); +#136387 = LINE('',#136388,#136389); +#136388 = CARTESIAN_POINT('',(-2.,2.449293598295E-16,-3.9)); +#136389 = VECTOR('',#136390,1.); +#136390 = DIRECTION('',(0.,0.,1.)); +#136391 = ORIENTED_EDGE('',*,*,#136392,.F.); +#136392 = EDGE_CURVE('',#136393,#136385,#136395,.T.); +#136393 = VERTEX_POINT('',#136394); +#136394 = CARTESIAN_POINT('',(-1.32287559491,1.499999832065, + 7.450000619704)); +#136395 = CIRCLE('',#136396,2.); +#136396 = AXIS2_PLACEMENT_3D('',#136397,#136398,#136399); +#136397 = CARTESIAN_POINT('',(0.,0.,7.45)); +#136398 = DIRECTION('',(0.,0.,1.)); +#136399 = DIRECTION('',(-0.661437827766,0.75,0.)); +#136400 = ORIENTED_EDGE('',*,*,#136401,.F.); +#136401 = EDGE_CURVE('',#136402,#136393,#136404,.T.); +#136402 = VERTEX_POINT('',#136403); +#136403 = CARTESIAN_POINT('',(-1.322875655532,1.5,-2.9)); +#136404 = LINE('',#136405,#136406); +#136405 = CARTESIAN_POINT('',(-1.322875655532,1.5,-2.9)); +#136406 = VECTOR('',#136407,1.); +#136407 = DIRECTION('',(5.857220444637E-09,-1.622562714817E-08,1.)); +#136408 = ORIENTED_EDGE('',*,*,#136409,.F.); +#136409 = EDGE_CURVE('',#136410,#136402,#136412,.T.); +#136410 = VERTEX_POINT('',#136411); +#136411 = CARTESIAN_POINT('',(1.322875655532,1.5,-2.9)); +#136412 = CIRCLE('',#136413,2.); +#136413 = AXIS2_PLACEMENT_3D('',#136414,#136415,#136416); +#136414 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#136415 = DIRECTION('',(0.,0.,1.)); +#136416 = DIRECTION('',(0.661437827766,0.75,-0.)); +#136417 = ORIENTED_EDGE('',*,*,#136418,.T.); +#136418 = EDGE_CURVE('',#136410,#136419,#136421,.T.); +#136419 = VERTEX_POINT('',#136420); +#136420 = CARTESIAN_POINT('',(1.322875655532,1.5,7.45)); +#136421 = LINE('',#136422,#136423); +#136422 = CARTESIAN_POINT('',(1.322875655532,1.5,-2.9)); +#136423 = VECTOR('',#136424,1.); +#136424 = DIRECTION('',(-6.961688337983E-14,-1.908510923103E-13,1.)); +#136425 = ORIENTED_EDGE('',*,*,#136426,.F.); +#136426 = EDGE_CURVE('',#136427,#136419,#136429,.T.); +#136427 = VERTEX_POINT('',#136428); +#136428 = CARTESIAN_POINT('',(2.,0.,7.45)); +#136429 = CIRCLE('',#136430,2.); +#136430 = AXIS2_PLACEMENT_3D('',#136431,#136432,#136433); +#136431 = CARTESIAN_POINT('',(0.,0.,7.45)); +#136432 = DIRECTION('',(0.,0.,1.)); +#136433 = DIRECTION('',(0.661437827766,-0.75,0.)); +#136434 = ORIENTED_EDGE('',*,*,#136435,.F.); +#136435 = EDGE_CURVE('',#136436,#136427,#136438,.T.); +#136436 = VERTEX_POINT('',#136437); +#136437 = CARTESIAN_POINT('',(2.,0.,-2.9)); +#136438 = LINE('',#136439,#136440); +#136439 = CARTESIAN_POINT('',(2.,0.,-3.9)); +#136440 = VECTOR('',#136441,1.); +#136441 = DIRECTION('',(0.,0.,1.)); +#136442 = ORIENTED_EDGE('',*,*,#136443,.F.); +#136443 = EDGE_CURVE('',#136444,#136436,#136446,.T.); +#136444 = VERTEX_POINT('',#136445); +#136445 = CARTESIAN_POINT('',(2.,0.,-3.9)); +#136446 = LINE('',#136447,#136448); +#136447 = CARTESIAN_POINT('',(2.,0.,-3.9)); +#136448 = VECTOR('',#136449,1.); +#136449 = DIRECTION('',(0.,0.,1.)); +#136450 = ORIENTED_EDGE('',*,*,#136451,.T.); +#136451 = EDGE_CURVE('',#136444,#136375,#136452,.T.); +#136452 = CIRCLE('',#136453,2.); +#136453 = AXIS2_PLACEMENT_3D('',#136454,#136455,#136456); +#136454 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#136455 = DIRECTION('',(0.,0.,1.)); +#136456 = DIRECTION('',(1.,0.,-0.)); +#136457 = CYLINDRICAL_SURFACE('',#136458,2.); +#136458 = AXIS2_PLACEMENT_3D('',#136459,#136460,#136461); +#136459 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#136460 = DIRECTION('',(0.,0.,1.)); +#136461 = DIRECTION('',(1.,0.,-0.)); +#136462 = ADVANCED_FACE('',(#136463),#136490,.T.); +#136463 = FACE_BOUND('',#136464,.T.); +#136464 = EDGE_LOOP('',(#136465,#136474,#136475,#136484)); +#136465 = ORIENTED_EDGE('',*,*,#136466,.T.); +#136466 = EDGE_CURVE('',#136467,#136436,#136469,.T.); +#136467 = VERTEX_POINT('',#136468); +#136468 = CARTESIAN_POINT('',(1.322875655532,-1.5,-2.9)); +#136469 = CIRCLE('',#136470,2.); +#136470 = AXIS2_PLACEMENT_3D('',#136471,#136472,#136473); +#136471 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#136472 = DIRECTION('',(0.,0.,1.)); +#136473 = DIRECTION('',(0.661437827766,-0.75,0.)); +#136474 = ORIENTED_EDGE('',*,*,#136435,.T.); +#136475 = ORIENTED_EDGE('',*,*,#136476,.F.); +#136476 = EDGE_CURVE('',#136477,#136427,#136479,.T.); +#136477 = VERTEX_POINT('',#136478); +#136478 = CARTESIAN_POINT('',(1.322875583574,-1.49999980066, + 7.450000735593)); +#136479 = CIRCLE('',#136480,2.); +#136480 = AXIS2_PLACEMENT_3D('',#136481,#136482,#136483); +#136481 = CARTESIAN_POINT('',(0.,0.,7.45)); +#136482 = DIRECTION('',(0.,0.,1.)); +#136483 = DIRECTION('',(0.661437827766,-0.75,0.)); +#136484 = ORIENTED_EDGE('',*,*,#136485,.F.); +#136485 = EDGE_CURVE('',#136467,#136477,#136486,.T.); +#136486 = LINE('',#136487,#136488); +#136487 = CARTESIAN_POINT('',(1.322875655532,-1.5,-2.9)); +#136488 = VECTOR('',#136489,1.); +#136489 = DIRECTION('',(-6.952540206836E-09,1.925993083098E-08,1.)); +#136490 = CYLINDRICAL_SURFACE('',#136491,2.); +#136491 = AXIS2_PLACEMENT_3D('',#136492,#136493,#136494); +#136492 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#136493 = DIRECTION('',(0.,0.,1.)); +#136494 = DIRECTION('',(1.,0.,-0.)); +#136495 = ADVANCED_FACE('',(#136496),#136546,.T.); +#136496 = FACE_BOUND('',#136497,.T.); +#136497 = EDGE_LOOP('',(#136498,#136508,#136516,#136524,#136532,#136540) + ); +#136498 = ORIENTED_EDGE('',*,*,#136499,.T.); +#136499 = EDGE_CURVE('',#136500,#136502,#136504,.T.); +#136500 = VERTEX_POINT('',#136501); +#136501 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.22)); +#136502 = VERTEX_POINT('',#136503); +#136503 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.22)); +#136504 = LINE('',#136505,#136506); +#136505 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.22)); +#136506 = VECTOR('',#136507,1.); +#136507 = DIRECTION('',(-1.,0.,0.)); +#136508 = ORIENTED_EDGE('',*,*,#136509,.T.); +#136509 = EDGE_CURVE('',#136502,#136510,#136512,.T.); +#136510 = VERTEX_POINT('',#136511); +#136511 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.22)); +#136512 = LINE('',#136513,#136514); +#136513 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.22)); +#136514 = VECTOR('',#136515,1.); +#136515 = DIRECTION('',(0.,1.,0.)); +#136516 = ORIENTED_EDGE('',*,*,#136517,.T.); +#136517 = EDGE_CURVE('',#136510,#136518,#136520,.T.); +#136518 = VERTEX_POINT('',#136519); +#136519 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.22)); +#136520 = LINE('',#136521,#136522); +#136521 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.22)); +#136522 = VECTOR('',#136523,1.); +#136523 = DIRECTION('',(1.,0.,0.)); +#136524 = ORIENTED_EDGE('',*,*,#136525,.T.); +#136525 = EDGE_CURVE('',#136518,#136526,#136528,.T.); +#136526 = VERTEX_POINT('',#136527); +#136527 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.22)); +#136528 = LINE('',#136529,#136530); +#136529 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.22)); +#136530 = VECTOR('',#136531,1.); +#136531 = DIRECTION('',(0.,1.,0.)); +#136532 = ORIENTED_EDGE('',*,*,#136533,.T.); +#136533 = EDGE_CURVE('',#136526,#136534,#136536,.T.); +#136534 = VERTEX_POINT('',#136535); +#136535 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.22)); +#136536 = LINE('',#136537,#136538); +#136537 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.22)); +#136538 = VECTOR('',#136539,1.); +#136539 = DIRECTION('',(1.,0.,0.)); +#136540 = ORIENTED_EDGE('',*,*,#136541,.T.); +#136541 = EDGE_CURVE('',#136534,#136500,#136542,.T.); +#136542 = LINE('',#136543,#136544); +#136543 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.22)); +#136544 = VECTOR('',#136545,1.); +#136545 = DIRECTION('',(0.,-1.,0.)); +#136546 = PLANE('',#136547); +#136547 = AXIS2_PLACEMENT_3D('',#136548,#136549,#136550); +#136548 = CARTESIAN_POINT('',(0.,0.,-11.22)); +#136549 = DIRECTION('',(0.,0.,-1.)); +#136550 = DIRECTION('',(0.,-1.,0.)); +#136551 = ADVANCED_FACE('',(#136552),#136874,.T.); +#136552 = FACE_BOUND('',#136553,.T.); +#136553 = EDGE_LOOP('',(#136554,#136564,#136572,#136580,#136588,#136596, + #136604,#136612,#136620,#136628,#136636,#136644,#136652,#136660, + #136668,#136676,#136684,#136692,#136700,#136708,#136716,#136724, + #136732,#136740,#136748,#136756,#136764,#136772,#136780,#136788, + #136796,#136804,#136812,#136820,#136828,#136836,#136844,#136852, + #136860,#136868)); +#136554 = ORIENTED_EDGE('',*,*,#136555,.T.); +#136555 = EDGE_CURVE('',#136556,#136558,#136560,.T.); +#136556 = VERTEX_POINT('',#136557); +#136557 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.22)); +#136558 = VERTEX_POINT('',#136559); +#136559 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.22)); +#136560 = LINE('',#136561,#136562); +#136561 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.22)); +#136562 = VECTOR('',#136563,1.); +#136563 = DIRECTION('',(0.310278995296,-0.950645541239,0.)); +#136564 = ORIENTED_EDGE('',*,*,#136565,.T.); +#136565 = EDGE_CURVE('',#136558,#136566,#136568,.T.); +#136566 = VERTEX_POINT('',#136567); +#136567 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.22)); +#136568 = LINE('',#136569,#136570); +#136569 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.22)); +#136570 = VECTOR('',#136571,1.); +#136571 = DIRECTION('',(0.826599187119,-0.562791065898,0.)); +#136572 = ORIENTED_EDGE('',*,*,#136573,.T.); +#136573 = EDGE_CURVE('',#136566,#136574,#136576,.T.); +#136574 = VERTEX_POINT('',#136575); +#136575 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.22)); +#136576 = LINE('',#136577,#136578); +#136577 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.22)); +#136578 = VECTOR('',#136579,1.); +#136579 = DIRECTION('',(0.968917745968,-0.247383106838,0.)); +#136580 = ORIENTED_EDGE('',*,*,#136581,.T.); +#136581 = EDGE_CURVE('',#136574,#136582,#136584,.T.); +#136582 = VERTEX_POINT('',#136583); +#136583 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.22)); +#136584 = LINE('',#136585,#136586); +#136585 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.22)); +#136586 = VECTOR('',#136587,1.); +#136587 = DIRECTION('',(1.,0.,0.)); +#136588 = ORIENTED_EDGE('',*,*,#136589,.T.); +#136589 = EDGE_CURVE('',#136582,#136590,#136592,.T.); +#136590 = VERTEX_POINT('',#136591); +#136591 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.22)); +#136592 = LINE('',#136593,#136594); +#136593 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.22)); +#136594 = VECTOR('',#136595,1.); +#136595 = DIRECTION('',(0.968917745968,0.247383106838,0.)); +#136596 = ORIENTED_EDGE('',*,*,#136597,.T.); +#136597 = EDGE_CURVE('',#136590,#136598,#136600,.T.); +#136598 = VERTEX_POINT('',#136599); +#136599 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.22)); +#136600 = LINE('',#136601,#136602); +#136601 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.22)); +#136602 = VECTOR('',#136603,1.); +#136603 = DIRECTION('',(0.826599187119,0.562791065898,0.)); +#136604 = ORIENTED_EDGE('',*,*,#136605,.T.); +#136605 = EDGE_CURVE('',#136598,#136606,#136608,.T.); +#136606 = VERTEX_POINT('',#136607); +#136607 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.22)); +#136608 = LINE('',#136609,#136610); +#136609 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.22)); +#136610 = VECTOR('',#136611,1.); +#136611 = DIRECTION('',(0.546622181089,0.837379359156,0.)); +#136612 = ORIENTED_EDGE('',*,*,#136613,.T.); +#136613 = EDGE_CURVE('',#136606,#136614,#136616,.T.); +#136614 = VERTEX_POINT('',#136615); +#136615 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.22)); +#136616 = LINE('',#136617,#136618); +#136617 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.22)); +#136618 = VECTOR('',#136619,1.); +#136619 = DIRECTION('',(0.237771780341,0.971321049125,0.)); +#136620 = ORIENTED_EDGE('',*,*,#136621,.T.); +#136621 = EDGE_CURVE('',#136614,#136622,#136624,.T.); +#136622 = VERTEX_POINT('',#136623); +#136623 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.22)); +#136624 = LINE('',#136625,#136626); +#136625 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.22)); +#136626 = VECTOR('',#136627,1.); +#136627 = DIRECTION('',(0.,1.,0.)); +#136628 = ORIENTED_EDGE('',*,*,#136629,.T.); +#136629 = EDGE_CURVE('',#136622,#136630,#136632,.T.); +#136630 = VERTEX_POINT('',#136631); +#136631 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.22)); +#136632 = LINE('',#136633,#136634); +#136633 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.22)); +#136634 = VECTOR('',#136635,1.); +#136635 = DIRECTION('',(-0.237771780341,0.971321049125,0.)); +#136636 = ORIENTED_EDGE('',*,*,#136637,.T.); +#136637 = EDGE_CURVE('',#136630,#136638,#136640,.T.); +#136638 = VERTEX_POINT('',#136639); +#136639 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.22)); +#136640 = LINE('',#136641,#136642); +#136641 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.22)); +#136642 = VECTOR('',#136643,1.); +#136643 = DIRECTION('',(-0.546621823168,0.837379592799,0.)); +#136644 = ORIENTED_EDGE('',*,*,#136645,.T.); +#136645 = EDGE_CURVE('',#136638,#136646,#136648,.T.); +#136646 = VERTEX_POINT('',#136647); +#136647 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.22)); +#136648 = LINE('',#136649,#136650); +#136649 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.22)); +#136650 = VECTOR('',#136651,1.); +#136651 = DIRECTION('',(-0.8265992788,0.562790931242,0.)); +#136652 = ORIENTED_EDGE('',*,*,#136653,.T.); +#136653 = EDGE_CURVE('',#136646,#136654,#136656,.T.); +#136654 = VERTEX_POINT('',#136655); +#136655 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.22)); +#136656 = LINE('',#136657,#136658); +#136657 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.22)); +#136658 = VECTOR('',#136659,1.); +#136659 = DIRECTION('',(-0.968917745968,0.247383106838,0.)); +#136660 = ORIENTED_EDGE('',*,*,#136661,.T.); +#136661 = EDGE_CURVE('',#136654,#136662,#136664,.T.); +#136662 = VERTEX_POINT('',#136663); +#136663 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.22)); +#136664 = LINE('',#136665,#136666); +#136665 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.22)); +#136666 = VECTOR('',#136667,1.); +#136667 = DIRECTION('',(-1.,0.,0.)); +#136668 = ORIENTED_EDGE('',*,*,#136669,.T.); +#136669 = EDGE_CURVE('',#136662,#136670,#136672,.T.); +#136670 = VERTEX_POINT('',#136671); +#136671 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.22)); +#136672 = LINE('',#136673,#136674); +#136673 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.22)); +#136674 = VECTOR('',#136675,1.); +#136675 = DIRECTION('',(-0.968917745968,-0.247383106838,0.)); +#136676 = ORIENTED_EDGE('',*,*,#136677,.T.); +#136677 = EDGE_CURVE('',#136670,#136678,#136680,.T.); +#136678 = VERTEX_POINT('',#136679); +#136679 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.22)); +#136680 = LINE('',#136681,#136682); +#136681 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.22)); +#136682 = VECTOR('',#136683,1.); +#136683 = DIRECTION('',(-0.8265992788,-0.562790931242,0.)); +#136684 = ORIENTED_EDGE('',*,*,#136685,.T.); +#136685 = EDGE_CURVE('',#136678,#136686,#136688,.T.); +#136686 = VERTEX_POINT('',#136687); +#136687 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.22)); +#136688 = LINE('',#136689,#136690); +#136689 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.22)); +#136690 = VECTOR('',#136691,1.); +#136691 = DIRECTION('',(-0.31027873345,-0.950645626703,0.)); +#136692 = ORIENTED_EDGE('',*,*,#136693,.T.); +#136693 = EDGE_CURVE('',#136686,#136694,#136696,.T.); +#136694 = VERTEX_POINT('',#136695); +#136695 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.22)); +#136696 = LINE('',#136697,#136698); +#136697 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.22)); +#136698 = VECTOR('',#136699,1.); +#136699 = DIRECTION('',(-1.,0.,0.)); +#136700 = ORIENTED_EDGE('',*,*,#136701,.T.); +#136701 = EDGE_CURVE('',#136694,#136702,#136704,.T.); +#136702 = VERTEX_POINT('',#136703); +#136703 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.22)); +#136704 = LINE('',#136705,#136706); +#136705 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.22)); +#136706 = VECTOR('',#136707,1.); +#136707 = DIRECTION('',(0.192182043673,0.981359293067,0.)); +#136708 = ORIENTED_EDGE('',*,*,#136709,.T.); +#136709 = EDGE_CURVE('',#136702,#136710,#136712,.T.); +#136710 = VERTEX_POINT('',#136711); +#136711 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.22)); +#136712 = LINE('',#136713,#136714); +#136713 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.22)); +#136714 = VECTOR('',#136715,1.); +#136715 = DIRECTION('',(0.699625005502,0.714510218035,0.)); +#136716 = ORIENTED_EDGE('',*,*,#136717,.T.); +#136717 = EDGE_CURVE('',#136710,#136718,#136720,.T.); +#136718 = VERTEX_POINT('',#136719); +#136719 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.22)); +#136720 = LINE('',#136721,#136722); +#136721 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.22)); +#136722 = VECTOR('',#136723,1.); +#136723 = DIRECTION('',(0.890605374698,0.454776941543,0.)); +#136724 = ORIENTED_EDGE('',*,*,#136725,.T.); +#136725 = EDGE_CURVE('',#136718,#136726,#136728,.T.); +#136726 = VERTEX_POINT('',#136727); +#136727 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.22)); +#136728 = LINE('',#136729,#136730); +#136729 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.22)); +#136730 = VECTOR('',#136731,1.); +#136731 = DIRECTION('',(0.97977069431,0.200123428343,0.)); +#136732 = ORIENTED_EDGE('',*,*,#136733,.T.); +#136733 = EDGE_CURVE('',#136726,#136734,#136736,.T.); +#136734 = VERTEX_POINT('',#136735); +#136735 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.22)); +#136736 = LINE('',#136737,#136738); +#136737 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.22)); +#136738 = VECTOR('',#136739,1.); +#136739 = DIRECTION('',(1.,0.,0.)); +#136740 = ORIENTED_EDGE('',*,*,#136741,.T.); +#136741 = EDGE_CURVE('',#136734,#136742,#136744,.T.); +#136742 = VERTEX_POINT('',#136743); +#136743 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.22)); +#136744 = LINE('',#136745,#136746); +#136745 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.22)); +#136746 = VECTOR('',#136747,1.); +#136747 = DIRECTION('',(0.97977069431,-0.200123428343,0.)); +#136748 = ORIENTED_EDGE('',*,*,#136749,.T.); +#136749 = EDGE_CURVE('',#136742,#136750,#136752,.T.); +#136750 = VERTEX_POINT('',#136751); +#136751 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.22)); +#136752 = LINE('',#136753,#136754); +#136753 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.22)); +#136754 = VECTOR('',#136755,1.); +#136755 = DIRECTION('',(0.890605374698,-0.454776941543,0.)); +#136756 = ORIENTED_EDGE('',*,*,#136757,.T.); +#136757 = EDGE_CURVE('',#136750,#136758,#136760,.T.); +#136758 = VERTEX_POINT('',#136759); +#136759 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.22)); +#136760 = LINE('',#136761,#136762); +#136761 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.22)); +#136762 = VECTOR('',#136763,1.); +#136763 = DIRECTION('',(0.69962475003,-0.714510468185,0.)); +#136764 = ORIENTED_EDGE('',*,*,#136765,.T.); +#136765 = EDGE_CURVE('',#136758,#136766,#136768,.T.); +#136766 = VERTEX_POINT('',#136767); +#136767 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.22)); +#136768 = LINE('',#136769,#136770); +#136769 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.22)); +#136770 = VECTOR('',#136771,1.); +#136771 = DIRECTION('',(0.439713664957,-0.898138014367,0.)); +#136772 = ORIENTED_EDGE('',*,*,#136773,.T.); +#136773 = EDGE_CURVE('',#136766,#136774,#136776,.T.); +#136774 = VERTEX_POINT('',#136775); +#136775 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.22)); +#136776 = LINE('',#136777,#136778); +#136777 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.22)); +#136778 = VECTOR('',#136779,1.); +#136779 = DIRECTION('',(0.192182573205,-0.981359189368,0.)); +#136780 = ORIENTED_EDGE('',*,*,#136781,.T.); +#136781 = EDGE_CURVE('',#136774,#136782,#136784,.T.); +#136782 = VERTEX_POINT('',#136783); +#136783 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.22)); +#136784 = LINE('',#136785,#136786); +#136785 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.22)); +#136786 = VECTOR('',#136787,1.); +#136787 = DIRECTION('',(0.,-1.,0.)); +#136788 = ORIENTED_EDGE('',*,*,#136789,.T.); +#136789 = EDGE_CURVE('',#136782,#136790,#136792,.T.); +#136790 = VERTEX_POINT('',#136791); +#136791 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.22)); +#136792 = LINE('',#136793,#136794); +#136793 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.22)); +#136794 = VECTOR('',#136795,1.); +#136795 = DIRECTION('',(-0.192182676904,-0.98135916906,0.)); +#136796 = ORIENTED_EDGE('',*,*,#136797,.T.); +#136797 = EDGE_CURVE('',#136790,#136798,#136800,.T.); +#136798 = VERTEX_POINT('',#136799); +#136799 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.22)); +#136800 = LINE('',#136801,#136802); +#136801 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.22)); +#136802 = VECTOR('',#136803,1.); +#136803 = DIRECTION('',(-0.439713602853,-0.898138044771,0.)); +#136804 = ORIENTED_EDGE('',*,*,#136805,.T.); +#136805 = EDGE_CURVE('',#136798,#136806,#136808,.T.); +#136806 = VERTEX_POINT('',#136807); +#136807 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.22)); +#136808 = LINE('',#136809,#136810); +#136809 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.22)); +#136810 = VECTOR('',#136811,1.); +#136811 = DIRECTION('',(-0.699624718761,-0.714510498802,0.)); +#136812 = ORIENTED_EDGE('',*,*,#136813,.T.); +#136813 = EDGE_CURVE('',#136806,#136814,#136816,.T.); +#136814 = VERTEX_POINT('',#136815); +#136815 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.22)); +#136816 = LINE('',#136817,#136818); +#136817 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.22)); +#136818 = VECTOR('',#136819,1.); +#136819 = DIRECTION('',(-0.89060535051,-0.454776988912,0.)); +#136820 = ORIENTED_EDGE('',*,*,#136821,.T.); +#136821 = EDGE_CURVE('',#136814,#136822,#136824,.T.); +#136822 = VERTEX_POINT('',#136823); +#136823 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.22)); +#136824 = LINE('',#136825,#136826); +#136825 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.22)); +#136826 = VECTOR('',#136827,1.); +#136827 = DIRECTION('',(-0.979770690874,-0.200123445161,0.)); +#136828 = ORIENTED_EDGE('',*,*,#136829,.T.); +#136829 = EDGE_CURVE('',#136822,#136830,#136832,.T.); +#136830 = VERTEX_POINT('',#136831); +#136831 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.22)); +#136832 = LINE('',#136833,#136834); +#136833 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.22)); +#136834 = VECTOR('',#136835,1.); +#136835 = DIRECTION('',(-1.,0.,0.)); +#136836 = ORIENTED_EDGE('',*,*,#136837,.T.); +#136837 = EDGE_CURVE('',#136830,#136838,#136840,.T.); +#136838 = VERTEX_POINT('',#136839); +#136839 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.22)); +#136840 = LINE('',#136841,#136842); +#136841 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.22)); +#136842 = VECTOR('',#136843,1.); +#136843 = DIRECTION('',(-0.979770690874,0.200123445161,0.)); +#136844 = ORIENTED_EDGE('',*,*,#136845,.T.); +#136845 = EDGE_CURVE('',#136838,#136846,#136848,.T.); +#136846 = VERTEX_POINT('',#136847); +#136847 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.22)); +#136848 = LINE('',#136849,#136850); +#136849 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.22)); +#136850 = VECTOR('',#136851,1.); +#136851 = DIRECTION('',(-0.89060535051,0.454776988912,0.)); +#136852 = ORIENTED_EDGE('',*,*,#136853,.T.); +#136853 = EDGE_CURVE('',#136846,#136854,#136856,.T.); +#136854 = VERTEX_POINT('',#136855); +#136855 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.22)); +#136856 = LINE('',#136857,#136858); +#136857 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.22)); +#136858 = VECTOR('',#136859,1.); +#136859 = DIRECTION('',(-0.699624974233,0.714510248653,0.)); +#136860 = ORIENTED_EDGE('',*,*,#136861,.T.); +#136861 = EDGE_CURVE('',#136854,#136862,#136864,.T.); +#136862 = VERTEX_POINT('',#136863); +#136863 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.22)); +#136864 = LINE('',#136865,#136866); +#136865 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.22)); +#136866 = VECTOR('',#136867,1.); +#136867 = DIRECTION('',(-0.192182121448,0.981359277837,0.)); +#136868 = ORIENTED_EDGE('',*,*,#136869,.T.); +#136869 = EDGE_CURVE('',#136862,#136556,#136870,.T.); +#136870 = LINE('',#136871,#136872); +#136871 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.22)); +#136872 = VECTOR('',#136873,1.); +#136873 = DIRECTION('',(1.,0.,0.)); +#136874 = PLANE('',#136875); +#136875 = AXIS2_PLACEMENT_3D('',#136876,#136877,#136878); +#136876 = CARTESIAN_POINT('',(0.,0.,-11.22)); +#136877 = DIRECTION('',(0.,0.,-1.)); +#136878 = DIRECTION('',(0.,-1.,0.)); +#136879 = ADVANCED_FACE('',(#136880),#136978,.T.); +#136880 = FACE_BOUND('',#136881,.T.); +#136881 = EDGE_LOOP('',(#136882,#136892,#136900,#136908,#136916,#136924, + #136932,#136940,#136948,#136956,#136964,#136972)); +#136882 = ORIENTED_EDGE('',*,*,#136883,.T.); +#136883 = EDGE_CURVE('',#136884,#136886,#136888,.T.); +#136884 = VERTEX_POINT('',#136885); +#136885 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.22) + ); +#136886 = VERTEX_POINT('',#136887); +#136887 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.22) + ); +#136888 = LINE('',#136889,#136890); +#136889 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.22) + ); +#136890 = VECTOR('',#136891,1.); +#136891 = DIRECTION('',(0.,1.,0.)); +#136892 = ORIENTED_EDGE('',*,*,#136893,.T.); +#136893 = EDGE_CURVE('',#136886,#136894,#136896,.T.); +#136894 = VERTEX_POINT('',#136895); +#136895 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.22)); +#136896 = LINE('',#136897,#136898); +#136897 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.22) + ); +#136898 = VECTOR('',#136899,1.); +#136899 = DIRECTION('',(-1.,0.,0.)); +#136900 = ORIENTED_EDGE('',*,*,#136901,.T.); +#136901 = EDGE_CURVE('',#136894,#136902,#136904,.T.); +#136902 = VERTEX_POINT('',#136903); +#136903 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.22)); +#136904 = LINE('',#136905,#136906); +#136905 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.22)); +#136906 = VECTOR('',#136907,1.); +#136907 = DIRECTION('',(0.,1.,0.)); +#136908 = ORIENTED_EDGE('',*,*,#136909,.T.); +#136909 = EDGE_CURVE('',#136902,#136910,#136912,.T.); +#136910 = VERTEX_POINT('',#136911); +#136911 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.22) + ); +#136912 = LINE('',#136913,#136914); +#136913 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.22)); +#136914 = VECTOR('',#136915,1.); +#136915 = DIRECTION('',(1.,0.,0.)); +#136916 = ORIENTED_EDGE('',*,*,#136917,.T.); +#136917 = EDGE_CURVE('',#136910,#136918,#136920,.T.); +#136918 = VERTEX_POINT('',#136919); +#136919 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.22)); +#136920 = LINE('',#136921,#136922); +#136921 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.22) + ); +#136922 = VECTOR('',#136923,1.); +#136923 = DIRECTION('',(0.,1.,0.)); +#136924 = ORIENTED_EDGE('',*,*,#136925,.T.); +#136925 = EDGE_CURVE('',#136918,#136926,#136928,.T.); +#136926 = VERTEX_POINT('',#136927); +#136927 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.22)); +#136928 = LINE('',#136929,#136930); +#136929 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.22)); +#136930 = VECTOR('',#136931,1.); +#136931 = DIRECTION('',(-1.,0.,0.)); +#136932 = ORIENTED_EDGE('',*,*,#136933,.T.); +#136933 = EDGE_CURVE('',#136926,#136934,#136936,.T.); +#136934 = VERTEX_POINT('',#136935); +#136935 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.22)); +#136936 = LINE('',#136937,#136938); +#136937 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.22)); +#136938 = VECTOR('',#136939,1.); +#136939 = DIRECTION('',(0.,1.,0.)); +#136940 = ORIENTED_EDGE('',*,*,#136941,.T.); +#136941 = EDGE_CURVE('',#136934,#136942,#136944,.T.); +#136942 = VERTEX_POINT('',#136943); +#136943 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.22)); +#136944 = LINE('',#136945,#136946); +#136945 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.22)); +#136946 = VECTOR('',#136947,1.); +#136947 = DIRECTION('',(1.,0.,0.)); +#136948 = ORIENTED_EDGE('',*,*,#136949,.T.); +#136949 = EDGE_CURVE('',#136942,#136950,#136952,.T.); +#136950 = VERTEX_POINT('',#136951); +#136951 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.22)); +#136952 = LINE('',#136953,#136954); +#136953 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.22)); +#136954 = VECTOR('',#136955,1.); +#136955 = DIRECTION('',(0.,-1.,0.)); +#136956 = ORIENTED_EDGE('',*,*,#136957,.T.); +#136957 = EDGE_CURVE('',#136950,#136958,#136960,.T.); +#136958 = VERTEX_POINT('',#136959); +#136959 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.22)); +#136960 = LINE('',#136961,#136962); +#136961 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.22)); +#136962 = VECTOR('',#136963,1.); +#136963 = DIRECTION('',(-1.,0.,0.)); +#136964 = ORIENTED_EDGE('',*,*,#136965,.T.); +#136965 = EDGE_CURVE('',#136958,#136966,#136968,.T.); +#136966 = VERTEX_POINT('',#136967); +#136967 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.22)); +#136968 = LINE('',#136969,#136970); +#136969 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.22)); +#136970 = VECTOR('',#136971,1.); +#136971 = DIRECTION('',(0.,1.,0.)); +#136972 = ORIENTED_EDGE('',*,*,#136973,.T.); +#136973 = EDGE_CURVE('',#136966,#136884,#136974,.T.); +#136974 = LINE('',#136975,#136976); +#136975 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.22)); +#136976 = VECTOR('',#136977,1.); +#136977 = DIRECTION('',(1.,0.,0.)); +#136978 = PLANE('',#136979); +#136979 = AXIS2_PLACEMENT_3D('',#136980,#136981,#136982); +#136980 = CARTESIAN_POINT('',(0.,0.,-11.22)); +#136981 = DIRECTION('',(0.,0.,-1.)); +#136982 = DIRECTION('',(0.,-1.,0.)); +#136983 = ADVANCED_FACE('',(#136984,#137098),#137196,.T.); +#136984 = FACE_BOUND('',#136985,.T.); +#136985 = EDGE_LOOP('',(#136986,#136996,#137004,#137012,#137020,#137028, + #137036,#137044,#137052,#137060,#137068,#137076,#137084,#137092)); +#136986 = ORIENTED_EDGE('',*,*,#136987,.T.); +#136987 = EDGE_CURVE('',#136988,#136990,#136992,.T.); +#136988 = VERTEX_POINT('',#136989); +#136989 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.22)); +#136990 = VERTEX_POINT('',#136991); +#136991 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.22)); +#136992 = LINE('',#136993,#136994); +#136993 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.22)); +#136994 = VECTOR('',#136995,1.); +#136995 = DIRECTION('',(0.,-1.,0.)); +#136996 = ORIENTED_EDGE('',*,*,#136997,.T.); +#136997 = EDGE_CURVE('',#136990,#136998,#137000,.T.); +#136998 = VERTEX_POINT('',#136999); +#136999 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.22)); +#137000 = LINE('',#137001,#137002); +#137001 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.22)); +#137002 = VECTOR('',#137003,1.); +#137003 = DIRECTION('',(-1.,0.,0.)); +#137004 = ORIENTED_EDGE('',*,*,#137005,.T.); +#137005 = EDGE_CURVE('',#136998,#137006,#137008,.T.); +#137006 = VERTEX_POINT('',#137007); +#137007 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.22)); +#137008 = LINE('',#137009,#137010); +#137009 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.22)); +#137010 = VECTOR('',#137011,1.); +#137011 = DIRECTION('',(-0.97977073578,0.200123225311,0.)); +#137012 = ORIENTED_EDGE('',*,*,#137013,.T.); +#137013 = EDGE_CURVE('',#137006,#137014,#137016,.T.); +#137014 = VERTEX_POINT('',#137015); +#137015 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.22)); +#137016 = LINE('',#137017,#137018); +#137017 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.22)); +#137018 = VECTOR('',#137019,1.); +#137019 = DIRECTION('',(-0.890605087014,0.454777504925,0.)); +#137020 = ORIENTED_EDGE('',*,*,#137021,.T.); +#137021 = EDGE_CURVE('',#137014,#137022,#137024,.T.); +#137022 = VERTEX_POINT('',#137023); +#137023 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.22)); +#137024 = LINE('',#137025,#137026); +#137025 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.22)); +#137026 = VECTOR('',#137027,1.); +#137027 = DIRECTION('',(-0.699624463288,0.714510748952,0.)); +#137028 = ORIENTED_EDGE('',*,*,#137029,.T.); +#137029 = EDGE_CURVE('',#137022,#137030,#137032,.T.); +#137030 = VERTEX_POINT('',#137031); +#137031 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.22)); +#137032 = LINE('',#137033,#137034); +#137033 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.22)); +#137034 = VECTOR('',#137035,1.); +#137035 = DIRECTION('',(-0.439714110249,0.898137796358,0.)); +#137036 = ORIENTED_EDGE('',*,*,#137037,.T.); +#137037 = EDGE_CURVE('',#137030,#137038,#137040,.T.); +#137038 = VERTEX_POINT('',#137039); +#137039 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.22)); +#137040 = LINE('',#137041,#137042); +#137041 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.22)); +#137042 = VECTOR('',#137043,1.); +#137043 = DIRECTION('',(-0.192182147373,0.98135927276,0.)); +#137044 = ORIENTED_EDGE('',*,*,#137045,.T.); +#137045 = EDGE_CURVE('',#137038,#137046,#137048,.T.); +#137046 = VERTEX_POINT('',#137047); +#137047 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.22)); +#137048 = LINE('',#137049,#137050); +#137049 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.22)); +#137050 = VECTOR('',#137051,1.); +#137051 = DIRECTION('',(0.,1.,0.)); +#137052 = ORIENTED_EDGE('',*,*,#137053,.T.); +#137053 = EDGE_CURVE('',#137046,#137054,#137056,.T.); +#137054 = VERTEX_POINT('',#137055); +#137055 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.22)); +#137056 = LINE('',#137057,#137058); +#137057 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.22)); +#137058 = VECTOR('',#137059,1.); +#137059 = DIRECTION('',(0.192182043673,0.981359293067,0.)); +#137060 = ORIENTED_EDGE('',*,*,#137061,.T.); +#137061 = EDGE_CURVE('',#137054,#137062,#137064,.T.); +#137062 = VERTEX_POINT('',#137063); +#137063 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.22)); +#137064 = LINE('',#137065,#137066); +#137065 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.22)); +#137066 = VECTOR('',#137067,1.); +#137067 = DIRECTION('',(0.439714172353,0.898137765954,0.)); +#137068 = ORIENTED_EDGE('',*,*,#137069,.T.); +#137069 = EDGE_CURVE('',#137062,#137070,#137072,.T.); +#137070 = VERTEX_POINT('',#137071); +#137071 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.22)); +#137072 = LINE('',#137073,#137074); +#137073 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.22)); +#137074 = VECTOR('',#137075,1.); +#137075 = DIRECTION('',(0.699624494557,0.714510718335,0.)); +#137076 = ORIENTED_EDGE('',*,*,#137077,.T.); +#137077 = EDGE_CURVE('',#137070,#137078,#137080,.T.); +#137078 = VERTEX_POINT('',#137079); +#137079 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.22)); +#137080 = LINE('',#137081,#137082); +#137081 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.22)); +#137082 = VECTOR('',#137083,1.); +#137083 = DIRECTION('',(0.890605111202,0.454777457556,0.)); +#137084 = ORIENTED_EDGE('',*,*,#137085,.T.); +#137085 = EDGE_CURVE('',#137078,#137086,#137088,.T.); +#137086 = VERTEX_POINT('',#137087); +#137087 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.22)); +#137088 = LINE('',#137089,#137090); +#137089 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.22)); +#137090 = VECTOR('',#137091,1.); +#137091 = DIRECTION('',(0.979770739215,0.200123208493,0.)); +#137092 = ORIENTED_EDGE('',*,*,#137093,.T.); +#137093 = EDGE_CURVE('',#137086,#136988,#137094,.T.); +#137094 = LINE('',#137095,#137096); +#137095 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.22)); +#137096 = VECTOR('',#137097,1.); +#137097 = DIRECTION('',(1.,0.,0.)); +#137098 = FACE_BOUND('',#137099,.T.); +#137099 = EDGE_LOOP('',(#137100,#137110,#137118,#137126,#137134,#137142, + #137150,#137158,#137166,#137174,#137182,#137190)); +#137100 = ORIENTED_EDGE('',*,*,#137101,.T.); +#137101 = EDGE_CURVE('',#137102,#137104,#137106,.T.); +#137102 = VERTEX_POINT('',#137103); +#137103 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.22)); +#137104 = VERTEX_POINT('',#137105); +#137105 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.22)); +#137106 = LINE('',#137107,#137108); +#137107 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.22)); +#137108 = VECTOR('',#137109,1.); +#137109 = DIRECTION('',(-0.968917661144,-0.247383439065,0.)); +#137110 = ORIENTED_EDGE('',*,*,#137111,.T.); +#137111 = EDGE_CURVE('',#137104,#137112,#137114,.T.); +#137112 = VERTEX_POINT('',#137113); +#137113 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.22)); +#137114 = LINE('',#137115,#137116); +#137115 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.22)); +#137116 = VECTOR('',#137117,1.); +#137117 = DIRECTION('',(-0.8265992788,-0.562790931242,0.)); +#137118 = ORIENTED_EDGE('',*,*,#137119,.T.); +#137119 = EDGE_CURVE('',#137112,#137120,#137122,.T.); +#137120 = VERTEX_POINT('',#137121); +#137121 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.22)); +#137122 = LINE('',#137123,#137124); +#137123 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.22)); +#137124 = VECTOR('',#137125,1.); +#137125 = DIRECTION('',(-0.546622919779,-0.837378876956,0.)); +#137126 = ORIENTED_EDGE('',*,*,#137127,.T.); +#137127 = EDGE_CURVE('',#137120,#137128,#137130,.T.); +#137128 = VERTEX_POINT('',#137129); +#137129 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.22)); +#137130 = LINE('',#137131,#137132); +#137131 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.22)); +#137132 = VECTOR('',#137133,1.); +#137133 = DIRECTION('',(-0.237770496721,-0.971321363344,0.)); +#137134 = ORIENTED_EDGE('',*,*,#137135,.T.); +#137135 = EDGE_CURVE('',#137128,#137136,#137138,.T.); +#137136 = VERTEX_POINT('',#137137); +#137137 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.22)); +#137138 = LINE('',#137139,#137140); +#137139 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.22)); +#137140 = VECTOR('',#137141,1.); +#137141 = DIRECTION('',(0.,-1.,0.)); +#137142 = ORIENTED_EDGE('',*,*,#137143,.T.); +#137143 = EDGE_CURVE('',#137136,#137144,#137146,.T.); +#137144 = VERTEX_POINT('',#137145); +#137145 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.22)); +#137146 = LINE('',#137147,#137148); +#137147 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.22)); +#137148 = VECTOR('',#137149,1.); +#137149 = DIRECTION('',(0.237770496721,-0.971321363344,0.)); +#137150 = ORIENTED_EDGE('',*,*,#137151,.T.); +#137151 = EDGE_CURVE('',#137144,#137152,#137154,.T.); +#137152 = VERTEX_POINT('',#137153); +#137153 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.22)); +#137154 = LINE('',#137155,#137156); +#137155 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.22)); +#137156 = VECTOR('',#137157,1.); +#137157 = DIRECTION('',(0.546623277701,-0.837378643312,0.)); +#137158 = ORIENTED_EDGE('',*,*,#137159,.T.); +#137159 = EDGE_CURVE('',#137152,#137160,#137162,.T.); +#137160 = VERTEX_POINT('',#137161); +#137161 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.22)); +#137162 = LINE('',#137163,#137164); +#137163 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.22)); +#137164 = VECTOR('',#137165,1.); +#137165 = DIRECTION('',(0.826599187119,-0.562791065898,0.)); +#137166 = ORIENTED_EDGE('',*,*,#137167,.T.); +#137167 = EDGE_CURVE('',#137160,#137168,#137170,.T.); +#137168 = VERTEX_POINT('',#137169); +#137169 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.22)); +#137170 = LINE('',#137171,#137172); +#137171 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.22)); +#137172 = VECTOR('',#137173,1.); +#137173 = DIRECTION('',(0.968917661144,-0.247383439065,0.)); +#137174 = ORIENTED_EDGE('',*,*,#137175,.T.); +#137175 = EDGE_CURVE('',#137168,#137176,#137178,.T.); +#137176 = VERTEX_POINT('',#137177); +#137177 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.22)); +#137178 = LINE('',#137179,#137180); +#137179 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.22)); +#137180 = VECTOR('',#137181,1.); +#137181 = DIRECTION('',(1.,0.,0.)); +#137182 = ORIENTED_EDGE('',*,*,#137183,.T.); +#137183 = EDGE_CURVE('',#137176,#137184,#137186,.T.); +#137184 = VERTEX_POINT('',#137185); +#137185 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.22)); +#137186 = LINE('',#137187,#137188); +#137187 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.22)); +#137188 = VECTOR('',#137189,1.); +#137189 = DIRECTION('',(0.,1.,0.)); +#137190 = ORIENTED_EDGE('',*,*,#137191,.T.); +#137191 = EDGE_CURVE('',#137184,#137102,#137192,.T.); +#137192 = LINE('',#137193,#137194); +#137193 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.22)); +#137194 = VECTOR('',#137195,1.); +#137195 = DIRECTION('',(-1.,0.,0.)); +#137196 = PLANE('',#137197); +#137197 = AXIS2_PLACEMENT_3D('',#137198,#137199,#137200); +#137198 = CARTESIAN_POINT('',(0.,0.,-11.22)); +#137199 = DIRECTION('',(0.,0.,-1.)); +#137200 = DIRECTION('',(0.,-1.,0.)); +#137201 = ADVANCED_FACE('',(#137202,#137268),#137294,.T.); +#137202 = FACE_BOUND('',#137203,.T.); +#137203 = EDGE_LOOP('',(#137204,#137214,#137222,#137230,#137238,#137246, + #137254,#137262)); +#137204 = ORIENTED_EDGE('',*,*,#137205,.T.); +#137205 = EDGE_CURVE('',#137206,#137208,#137210,.T.); +#137206 = VERTEX_POINT('',#137207); +#137207 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.22)); +#137208 = VERTEX_POINT('',#137209); +#137209 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.22)); +#137210 = LINE('',#137211,#137212); +#137211 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.22)); +#137212 = VECTOR('',#137213,1.); +#137213 = DIRECTION('',(0.316227901727,-0.948683252814,0.)); +#137214 = ORIENTED_EDGE('',*,*,#137215,.T.); +#137215 = EDGE_CURVE('',#137208,#137216,#137218,.T.); +#137216 = VERTEX_POINT('',#137217); +#137217 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.22)); +#137218 = LINE('',#137219,#137220); +#137219 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.22)); +#137220 = VECTOR('',#137221,1.); +#137221 = DIRECTION('',(-1.,0.,0.)); +#137222 = ORIENTED_EDGE('',*,*,#137223,.T.); +#137223 = EDGE_CURVE('',#137216,#137224,#137226,.T.); +#137224 = VERTEX_POINT('',#137225); +#137225 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.22)); +#137226 = LINE('',#137227,#137228); +#137227 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.22)); +#137228 = VECTOR('',#137229,1.); +#137229 = DIRECTION('',(-0.310280567074,0.950645028229,0.)); +#137230 = ORIENTED_EDGE('',*,*,#137231,.T.); +#137231 = EDGE_CURVE('',#137224,#137232,#137234,.T.); +#137232 = VERTEX_POINT('',#137233); +#137233 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.22)); +#137234 = LINE('',#137235,#137236); +#137235 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.22)); +#137236 = VECTOR('',#137237,1.); +#137237 = DIRECTION('',(-1.,0.,0.)); +#137238 = ORIENTED_EDGE('',*,*,#137239,.T.); +#137239 = EDGE_CURVE('',#137232,#137240,#137242,.T.); +#137240 = VERTEX_POINT('',#137241); +#137241 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.22)); +#137242 = LINE('',#137243,#137244); +#137243 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.22)); +#137244 = VECTOR('',#137245,1.); +#137245 = DIRECTION('',(-0.310280567074,-0.950645028229,0.)); +#137246 = ORIENTED_EDGE('',*,*,#137247,.T.); +#137247 = EDGE_CURVE('',#137240,#137248,#137250,.T.); +#137248 = VERTEX_POINT('',#137249); +#137249 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.22)); +#137250 = LINE('',#137251,#137252); +#137251 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.22)); +#137252 = VECTOR('',#137253,1.); +#137253 = DIRECTION('',(-1.,0.,0.)); +#137254 = ORIENTED_EDGE('',*,*,#137255,.T.); +#137255 = EDGE_CURVE('',#137248,#137256,#137258,.T.); +#137256 = VERTEX_POINT('',#137257); +#137257 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.22)); +#137258 = LINE('',#137259,#137260); +#137259 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.22)); +#137260 = VECTOR('',#137261,1.); +#137261 = DIRECTION('',(0.316227901727,0.948683252814,0.)); +#137262 = ORIENTED_EDGE('',*,*,#137263,.T.); +#137263 = EDGE_CURVE('',#137256,#137206,#137264,.T.); +#137264 = LINE('',#137265,#137266); +#137265 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.22)); +#137266 = VECTOR('',#137267,1.); +#137267 = DIRECTION('',(1.,0.,0.)); +#137268 = FACE_BOUND('',#137269,.T.); +#137269 = EDGE_LOOP('',(#137270,#137280,#137288)); +#137270 = ORIENTED_EDGE('',*,*,#137271,.T.); +#137271 = EDGE_CURVE('',#137272,#137274,#137276,.T.); +#137272 = VERTEX_POINT('',#137273); +#137273 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.22)); +#137274 = VERTEX_POINT('',#137275); +#137275 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.22)); +#137276 = LINE('',#137277,#137278); +#137277 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.22)); +#137278 = VECTOR('',#137279,1.); +#137279 = DIRECTION('',(1.,0.,0.)); +#137280 = ORIENTED_EDGE('',*,*,#137281,.T.); +#137281 = EDGE_CURVE('',#137274,#137282,#137284,.T.); +#137282 = VERTEX_POINT('',#137283); +#137283 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.22)); +#137284 = LINE('',#137285,#137286); +#137285 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.22)); +#137286 = VECTOR('',#137287,1.); +#137287 = DIRECTION('',(-0.310280021328,0.950645206355,0.)); +#137288 = ORIENTED_EDGE('',*,*,#137289,.T.); +#137289 = EDGE_CURVE('',#137282,#137272,#137290,.T.); +#137290 = LINE('',#137291,#137292); +#137291 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.22)); +#137292 = VECTOR('',#137293,1.); +#137293 = DIRECTION('',(-0.310280021328,-0.950645206355,0.)); +#137294 = PLANE('',#137295); +#137295 = AXIS2_PLACEMENT_3D('',#137296,#137297,#137298); +#137296 = CARTESIAN_POINT('',(0.,0.,-11.22)); +#137297 = DIRECTION('',(0.,0.,-1.)); +#137298 = DIRECTION('',(0.,-1.,0.)); +#137299 = ADVANCED_FACE('',(#137300),#137325,.T.); +#137300 = FACE_BOUND('',#137301,.T.); +#137301 = EDGE_LOOP('',(#137302,#137310,#137311,#137319)); +#137302 = ORIENTED_EDGE('',*,*,#137303,.T.); +#137303 = EDGE_CURVE('',#137304,#136500,#137306,.T.); +#137304 = VERTEX_POINT('',#137305); +#137305 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.2)); +#137306 = LINE('',#137307,#137308); +#137307 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.2)); +#137308 = VECTOR('',#137309,1.); +#137309 = DIRECTION('',(0.,0.,-1.)); +#137310 = ORIENTED_EDGE('',*,*,#136541,.F.); +#137311 = ORIENTED_EDGE('',*,*,#137312,.F.); +#137312 = EDGE_CURVE('',#137313,#136534,#137315,.T.); +#137313 = VERTEX_POINT('',#137314); +#137314 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.2)); +#137315 = LINE('',#137316,#137317); +#137316 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.2)); +#137317 = VECTOR('',#137318,1.); +#137318 = DIRECTION('',(0.,0.,-1.)); +#137319 = ORIENTED_EDGE('',*,*,#137320,.T.); +#137320 = EDGE_CURVE('',#137313,#137304,#137321,.T.); +#137321 = LINE('',#137322,#137323); +#137322 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.2)); +#137323 = VECTOR('',#137324,1.); +#137324 = DIRECTION('',(0.,-1.,0.)); +#137325 = PLANE('',#137326); +#137326 = AXIS2_PLACEMENT_3D('',#137327,#137328,#137329); +#137327 = CARTESIAN_POINT('',(0.901911825898,-2.1,-11.2)); +#137328 = DIRECTION('',(1.,0.,0.)); +#137329 = DIRECTION('',(-0.,1.,0.)); +#137330 = ADVANCED_FACE('',(#137331,#137351,#137371,#137412,#137734, + #137832,#137946),#138012,.T.); +#137331 = FACE_BOUND('',#137332,.T.); +#137332 = EDGE_LOOP('',(#137333,#137344)); +#137333 = ORIENTED_EDGE('',*,*,#137334,.T.); +#137334 = EDGE_CURVE('',#137335,#137337,#137339,.T.); +#137335 = VERTEX_POINT('',#137336); +#137336 = CARTESIAN_POINT('',(-2.75,0.,-11.2)); +#137337 = VERTEX_POINT('',#137338); +#137338 = CARTESIAN_POINT('',(2.75,0.,-11.2)); +#137339 = CIRCLE('',#137340,2.75); +#137340 = AXIS2_PLACEMENT_3D('',#137341,#137342,#137343); +#137341 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#137342 = DIRECTION('',(0.,0.,-1.)); +#137343 = DIRECTION('',(-1.,0.,0.)); +#137344 = ORIENTED_EDGE('',*,*,#137345,.T.); +#137345 = EDGE_CURVE('',#137337,#137335,#137346,.T.); +#137346 = CIRCLE('',#137347,2.75); +#137347 = AXIS2_PLACEMENT_3D('',#137348,#137349,#137350); +#137348 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#137349 = DIRECTION('',(0.,0.,-1.)); +#137350 = DIRECTION('',(1.,0.,0.)); +#137351 = FACE_BOUND('',#137352,.T.); +#137352 = EDGE_LOOP('',(#137353,#137364)); +#137353 = ORIENTED_EDGE('',*,*,#137354,.F.); +#137354 = EDGE_CURVE('',#137355,#137357,#137359,.T.); +#137355 = VERTEX_POINT('',#137356); +#137356 = CARTESIAN_POINT('',(1.25,0.,-11.2)); +#137357 = VERTEX_POINT('',#137358); +#137358 = CARTESIAN_POINT('',(-1.25,0.,-11.2)); +#137359 = CIRCLE('',#137360,1.25); +#137360 = AXIS2_PLACEMENT_3D('',#137361,#137362,#137363); +#137361 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#137362 = DIRECTION('',(0.,0.,-1.)); +#137363 = DIRECTION('',(1.,0.,0.)); +#137364 = ORIENTED_EDGE('',*,*,#137365,.F.); +#137365 = EDGE_CURVE('',#137357,#137355,#137366,.T.); +#137366 = CIRCLE('',#137367,1.25); +#137367 = AXIS2_PLACEMENT_3D('',#137368,#137369,#137370); +#137368 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#137369 = DIRECTION('',(0.,0.,-1.)); +#137370 = DIRECTION('',(-1.,0.,0.)); +#137371 = FACE_BOUND('',#137372,.T.); +#137372 = EDGE_LOOP('',(#137373,#137381,#137389,#137397,#137405,#137411) + ); +#137373 = ORIENTED_EDGE('',*,*,#137374,.F.); +#137374 = EDGE_CURVE('',#137375,#137313,#137377,.T.); +#137375 = VERTEX_POINT('',#137376); +#137376 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.2)); +#137377 = LINE('',#137378,#137379); +#137378 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.2)); +#137379 = VECTOR('',#137380,1.); +#137380 = DIRECTION('',(1.,0.,0.)); +#137381 = ORIENTED_EDGE('',*,*,#137382,.F.); +#137382 = EDGE_CURVE('',#137383,#137375,#137385,.T.); +#137383 = VERTEX_POINT('',#137384); +#137384 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.2)); +#137385 = LINE('',#137386,#137387); +#137386 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.2)); +#137387 = VECTOR('',#137388,1.); +#137388 = DIRECTION('',(0.,1.,0.)); +#137389 = ORIENTED_EDGE('',*,*,#137390,.F.); +#137390 = EDGE_CURVE('',#137391,#137383,#137393,.T.); +#137391 = VERTEX_POINT('',#137392); +#137392 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.2)); +#137393 = LINE('',#137394,#137395); +#137394 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.2)); +#137395 = VECTOR('',#137396,1.); +#137396 = DIRECTION('',(1.,0.,0.)); +#137397 = ORIENTED_EDGE('',*,*,#137398,.F.); +#137398 = EDGE_CURVE('',#137399,#137391,#137401,.T.); +#137399 = VERTEX_POINT('',#137400); +#137400 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.2)); +#137401 = LINE('',#137402,#137403); +#137402 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.2)); +#137403 = VECTOR('',#137404,1.); +#137404 = DIRECTION('',(0.,1.,0.)); +#137405 = ORIENTED_EDGE('',*,*,#137406,.F.); +#137406 = EDGE_CURVE('',#137304,#137399,#137407,.T.); +#137407 = LINE('',#137408,#137409); +#137408 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.2)); +#137409 = VECTOR('',#137410,1.); +#137410 = DIRECTION('',(-1.,0.,0.)); +#137411 = ORIENTED_EDGE('',*,*,#137320,.F.); +#137412 = FACE_BOUND('',#137413,.T.); +#137413 = EDGE_LOOP('',(#137414,#137424,#137432,#137440,#137448,#137456, + #137464,#137472,#137480,#137488,#137496,#137504,#137512,#137520, + #137528,#137536,#137544,#137552,#137560,#137568,#137576,#137584, + #137592,#137600,#137608,#137616,#137624,#137632,#137640,#137648, + #137656,#137664,#137672,#137680,#137688,#137696,#137704,#137712, + #137720,#137728)); +#137414 = ORIENTED_EDGE('',*,*,#137415,.F.); +#137415 = EDGE_CURVE('',#137416,#137418,#137420,.T.); +#137416 = VERTEX_POINT('',#137417); +#137417 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.2)); +#137418 = VERTEX_POINT('',#137419); +#137419 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.2)); +#137420 = LINE('',#137421,#137422); +#137421 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.2)); +#137422 = VECTOR('',#137423,1.); +#137423 = DIRECTION('',(-0.192182121448,0.981359277837,0.)); +#137424 = ORIENTED_EDGE('',*,*,#137425,.F.); +#137425 = EDGE_CURVE('',#137426,#137416,#137428,.T.); +#137426 = VERTEX_POINT('',#137427); +#137427 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.2)); +#137428 = LINE('',#137429,#137430); +#137429 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.2)); +#137430 = VECTOR('',#137431,1.); +#137431 = DIRECTION('',(-0.699624974233,0.714510248653,0.)); +#137432 = ORIENTED_EDGE('',*,*,#137433,.F.); +#137433 = EDGE_CURVE('',#137434,#137426,#137436,.T.); +#137434 = VERTEX_POINT('',#137435); +#137435 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.2)); +#137436 = LINE('',#137437,#137438); +#137437 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.2)); +#137438 = VECTOR('',#137439,1.); +#137439 = DIRECTION('',(-0.89060535051,0.454776988912,0.)); +#137440 = ORIENTED_EDGE('',*,*,#137441,.F.); +#137441 = EDGE_CURVE('',#137442,#137434,#137444,.T.); +#137442 = VERTEX_POINT('',#137443); +#137443 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.2)); +#137444 = LINE('',#137445,#137446); +#137445 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.2)); +#137446 = VECTOR('',#137447,1.); +#137447 = DIRECTION('',(-0.979770690874,0.200123445161,0.)); +#137448 = ORIENTED_EDGE('',*,*,#137449,.F.); +#137449 = EDGE_CURVE('',#137450,#137442,#137452,.T.); +#137450 = VERTEX_POINT('',#137451); +#137451 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.2)); +#137452 = LINE('',#137453,#137454); +#137453 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.2)); +#137454 = VECTOR('',#137455,1.); +#137455 = DIRECTION('',(-1.,0.,0.)); +#137456 = ORIENTED_EDGE('',*,*,#137457,.F.); +#137457 = EDGE_CURVE('',#137458,#137450,#137460,.T.); +#137458 = VERTEX_POINT('',#137459); +#137459 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.2)); +#137460 = LINE('',#137461,#137462); +#137461 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.2)); +#137462 = VECTOR('',#137463,1.); +#137463 = DIRECTION('',(-0.979770690874,-0.200123445161,0.)); +#137464 = ORIENTED_EDGE('',*,*,#137465,.F.); +#137465 = EDGE_CURVE('',#137466,#137458,#137468,.T.); +#137466 = VERTEX_POINT('',#137467); +#137467 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.2)); +#137468 = LINE('',#137469,#137470); +#137469 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.2)); +#137470 = VECTOR('',#137471,1.); +#137471 = DIRECTION('',(-0.89060535051,-0.454776988912,0.)); +#137472 = ORIENTED_EDGE('',*,*,#137473,.F.); +#137473 = EDGE_CURVE('',#137474,#137466,#137476,.T.); +#137474 = VERTEX_POINT('',#137475); +#137475 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.2)); +#137476 = LINE('',#137477,#137478); +#137477 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.2)); +#137478 = VECTOR('',#137479,1.); +#137479 = DIRECTION('',(-0.699624718761,-0.714510498802,0.)); +#137480 = ORIENTED_EDGE('',*,*,#137481,.F.); +#137481 = EDGE_CURVE('',#137482,#137474,#137484,.T.); +#137482 = VERTEX_POINT('',#137483); +#137483 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.2)); +#137484 = LINE('',#137485,#137486); +#137485 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.2)); +#137486 = VECTOR('',#137487,1.); +#137487 = DIRECTION('',(-0.439713602853,-0.898138044771,0.)); +#137488 = ORIENTED_EDGE('',*,*,#137489,.F.); +#137489 = EDGE_CURVE('',#137490,#137482,#137492,.T.); +#137490 = VERTEX_POINT('',#137491); +#137491 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.2)); +#137492 = LINE('',#137493,#137494); +#137493 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.2)); +#137494 = VECTOR('',#137495,1.); +#137495 = DIRECTION('',(-0.192182676904,-0.98135916906,0.)); +#137496 = ORIENTED_EDGE('',*,*,#137497,.F.); +#137497 = EDGE_CURVE('',#137498,#137490,#137500,.T.); +#137498 = VERTEX_POINT('',#137499); +#137499 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.2)); +#137500 = LINE('',#137501,#137502); +#137501 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.2)); +#137502 = VECTOR('',#137503,1.); +#137503 = DIRECTION('',(0.,-1.,0.)); +#137504 = ORIENTED_EDGE('',*,*,#137505,.F.); +#137505 = EDGE_CURVE('',#137506,#137498,#137508,.T.); +#137506 = VERTEX_POINT('',#137507); +#137507 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.2)); +#137508 = LINE('',#137509,#137510); +#137509 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.2)); +#137510 = VECTOR('',#137511,1.); +#137511 = DIRECTION('',(0.192182573205,-0.981359189368,0.)); +#137512 = ORIENTED_EDGE('',*,*,#137513,.F.); +#137513 = EDGE_CURVE('',#137514,#137506,#137516,.T.); +#137514 = VERTEX_POINT('',#137515); +#137515 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.2)); +#137516 = LINE('',#137517,#137518); +#137517 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.2)); +#137518 = VECTOR('',#137519,1.); +#137519 = DIRECTION('',(0.439713664957,-0.898138014367,0.)); +#137520 = ORIENTED_EDGE('',*,*,#137521,.F.); +#137521 = EDGE_CURVE('',#137522,#137514,#137524,.T.); +#137522 = VERTEX_POINT('',#137523); +#137523 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.2)); +#137524 = LINE('',#137525,#137526); +#137525 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.2)); +#137526 = VECTOR('',#137527,1.); +#137527 = DIRECTION('',(0.69962475003,-0.714510468185,0.)); +#137528 = ORIENTED_EDGE('',*,*,#137529,.F.); +#137529 = EDGE_CURVE('',#137530,#137522,#137532,.T.); +#137530 = VERTEX_POINT('',#137531); +#137531 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.2)); +#137532 = LINE('',#137533,#137534); +#137533 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.2)); +#137534 = VECTOR('',#137535,1.); +#137535 = DIRECTION('',(0.890605374698,-0.454776941543,0.)); +#137536 = ORIENTED_EDGE('',*,*,#137537,.F.); +#137537 = EDGE_CURVE('',#137538,#137530,#137540,.T.); +#137538 = VERTEX_POINT('',#137539); +#137539 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.2)); +#137540 = LINE('',#137541,#137542); +#137541 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.2)); +#137542 = VECTOR('',#137543,1.); +#137543 = DIRECTION('',(0.97977069431,-0.200123428343,0.)); +#137544 = ORIENTED_EDGE('',*,*,#137545,.F.); +#137545 = EDGE_CURVE('',#137546,#137538,#137548,.T.); +#137546 = VERTEX_POINT('',#137547); +#137547 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.2)); +#137548 = LINE('',#137549,#137550); +#137549 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.2)); +#137550 = VECTOR('',#137551,1.); +#137551 = DIRECTION('',(1.,0.,0.)); +#137552 = ORIENTED_EDGE('',*,*,#137553,.F.); +#137553 = EDGE_CURVE('',#137554,#137546,#137556,.T.); +#137554 = VERTEX_POINT('',#137555); +#137555 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.2)); +#137556 = LINE('',#137557,#137558); +#137557 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.2)); +#137558 = VECTOR('',#137559,1.); +#137559 = DIRECTION('',(0.97977069431,0.200123428343,0.)); +#137560 = ORIENTED_EDGE('',*,*,#137561,.F.); +#137561 = EDGE_CURVE('',#137562,#137554,#137564,.T.); +#137562 = VERTEX_POINT('',#137563); +#137563 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.2)); +#137564 = LINE('',#137565,#137566); +#137565 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.2)); +#137566 = VECTOR('',#137567,1.); +#137567 = DIRECTION('',(0.890605374698,0.454776941543,0.)); +#137568 = ORIENTED_EDGE('',*,*,#137569,.F.); +#137569 = EDGE_CURVE('',#137570,#137562,#137572,.T.); +#137570 = VERTEX_POINT('',#137571); +#137571 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.2)); +#137572 = LINE('',#137573,#137574); +#137573 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.2)); +#137574 = VECTOR('',#137575,1.); +#137575 = DIRECTION('',(0.699625005502,0.714510218035,0.)); +#137576 = ORIENTED_EDGE('',*,*,#137577,.F.); +#137577 = EDGE_CURVE('',#137578,#137570,#137580,.T.); +#137578 = VERTEX_POINT('',#137579); +#137579 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.2)); +#137580 = LINE('',#137581,#137582); +#137581 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.2)); +#137582 = VECTOR('',#137583,1.); +#137583 = DIRECTION('',(0.192182043673,0.981359293067,0.)); +#137584 = ORIENTED_EDGE('',*,*,#137585,.F.); +#137585 = EDGE_CURVE('',#137586,#137578,#137588,.T.); +#137586 = VERTEX_POINT('',#137587); +#137587 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.2)); +#137588 = LINE('',#137589,#137590); +#137589 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.2)); +#137590 = VECTOR('',#137591,1.); +#137591 = DIRECTION('',(-1.,0.,0.)); +#137592 = ORIENTED_EDGE('',*,*,#137593,.F.); +#137593 = EDGE_CURVE('',#137594,#137586,#137596,.T.); +#137594 = VERTEX_POINT('',#137595); +#137595 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.2)); +#137596 = LINE('',#137597,#137598); +#137597 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.2)); +#137598 = VECTOR('',#137599,1.); +#137599 = DIRECTION('',(-0.31027873345,-0.950645626703,0.)); +#137600 = ORIENTED_EDGE('',*,*,#137601,.F.); +#137601 = EDGE_CURVE('',#137602,#137594,#137604,.T.); +#137602 = VERTEX_POINT('',#137603); +#137603 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.2)); +#137604 = LINE('',#137605,#137606); +#137605 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.2)); +#137606 = VECTOR('',#137607,1.); +#137607 = DIRECTION('',(-0.8265992788,-0.562790931242,0.)); +#137608 = ORIENTED_EDGE('',*,*,#137609,.F.); +#137609 = EDGE_CURVE('',#137610,#137602,#137612,.T.); +#137610 = VERTEX_POINT('',#137611); +#137611 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.2)); +#137612 = LINE('',#137613,#137614); +#137613 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.2)); +#137614 = VECTOR('',#137615,1.); +#137615 = DIRECTION('',(-0.968917745968,-0.247383106838,0.)); +#137616 = ORIENTED_EDGE('',*,*,#137617,.F.); +#137617 = EDGE_CURVE('',#137618,#137610,#137620,.T.); +#137618 = VERTEX_POINT('',#137619); +#137619 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.2)); +#137620 = LINE('',#137621,#137622); +#137621 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.2)); +#137622 = VECTOR('',#137623,1.); +#137623 = DIRECTION('',(-1.,0.,0.)); +#137624 = ORIENTED_EDGE('',*,*,#137625,.F.); +#137625 = EDGE_CURVE('',#137626,#137618,#137628,.T.); +#137626 = VERTEX_POINT('',#137627); +#137627 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.2)); +#137628 = LINE('',#137629,#137630); +#137629 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.2)); +#137630 = VECTOR('',#137631,1.); +#137631 = DIRECTION('',(-0.968917745968,0.247383106838,0.)); +#137632 = ORIENTED_EDGE('',*,*,#137633,.F.); +#137633 = EDGE_CURVE('',#137634,#137626,#137636,.T.); +#137634 = VERTEX_POINT('',#137635); +#137635 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.2)); +#137636 = LINE('',#137637,#137638); +#137637 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.2)); +#137638 = VECTOR('',#137639,1.); +#137639 = DIRECTION('',(-0.8265992788,0.562790931242,0.)); +#137640 = ORIENTED_EDGE('',*,*,#137641,.F.); +#137641 = EDGE_CURVE('',#137642,#137634,#137644,.T.); +#137642 = VERTEX_POINT('',#137643); +#137643 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.2)); +#137644 = LINE('',#137645,#137646); +#137645 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.2)); +#137646 = VECTOR('',#137647,1.); +#137647 = DIRECTION('',(-0.546621823168,0.837379592799,0.)); +#137648 = ORIENTED_EDGE('',*,*,#137649,.F.); +#137649 = EDGE_CURVE('',#137650,#137642,#137652,.T.); +#137650 = VERTEX_POINT('',#137651); +#137651 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.2)); +#137652 = LINE('',#137653,#137654); +#137653 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.2)); +#137654 = VECTOR('',#137655,1.); +#137655 = DIRECTION('',(-0.237771780341,0.971321049125,0.)); +#137656 = ORIENTED_EDGE('',*,*,#137657,.F.); +#137657 = EDGE_CURVE('',#137658,#137650,#137660,.T.); +#137658 = VERTEX_POINT('',#137659); +#137659 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.2)); +#137660 = LINE('',#137661,#137662); +#137661 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.2)); +#137662 = VECTOR('',#137663,1.); +#137663 = DIRECTION('',(0.,1.,0.)); +#137664 = ORIENTED_EDGE('',*,*,#137665,.F.); +#137665 = EDGE_CURVE('',#137666,#137658,#137668,.T.); +#137666 = VERTEX_POINT('',#137667); +#137667 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.2)); +#137668 = LINE('',#137669,#137670); +#137669 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.2)); +#137670 = VECTOR('',#137671,1.); +#137671 = DIRECTION('',(0.237771780341,0.971321049125,0.)); +#137672 = ORIENTED_EDGE('',*,*,#137673,.F.); +#137673 = EDGE_CURVE('',#137674,#137666,#137676,.T.); +#137674 = VERTEX_POINT('',#137675); +#137675 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.2)); +#137676 = LINE('',#137677,#137678); +#137677 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.2)); +#137678 = VECTOR('',#137679,1.); +#137679 = DIRECTION('',(0.546622181089,0.837379359156,0.)); +#137680 = ORIENTED_EDGE('',*,*,#137681,.F.); +#137681 = EDGE_CURVE('',#137682,#137674,#137684,.T.); +#137682 = VERTEX_POINT('',#137683); +#137683 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.2)); +#137684 = LINE('',#137685,#137686); +#137685 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.2)); +#137686 = VECTOR('',#137687,1.); +#137687 = DIRECTION('',(0.826599187119,0.562791065898,0.)); +#137688 = ORIENTED_EDGE('',*,*,#137689,.F.); +#137689 = EDGE_CURVE('',#137690,#137682,#137692,.T.); +#137690 = VERTEX_POINT('',#137691); +#137691 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.2)); +#137692 = LINE('',#137693,#137694); +#137693 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.2)); +#137694 = VECTOR('',#137695,1.); +#137695 = DIRECTION('',(0.968917745968,0.247383106838,0.)); +#137696 = ORIENTED_EDGE('',*,*,#137697,.F.); +#137697 = EDGE_CURVE('',#137698,#137690,#137700,.T.); +#137698 = VERTEX_POINT('',#137699); +#137699 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.2)); +#137700 = LINE('',#137701,#137702); +#137701 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.2)); +#137702 = VECTOR('',#137703,1.); +#137703 = DIRECTION('',(1.,0.,0.)); +#137704 = ORIENTED_EDGE('',*,*,#137705,.F.); +#137705 = EDGE_CURVE('',#137706,#137698,#137708,.T.); +#137706 = VERTEX_POINT('',#137707); +#137707 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.2)); +#137708 = LINE('',#137709,#137710); +#137709 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.2)); +#137710 = VECTOR('',#137711,1.); +#137711 = DIRECTION('',(0.968917745968,-0.247383106838,0.)); +#137712 = ORIENTED_EDGE('',*,*,#137713,.F.); +#137713 = EDGE_CURVE('',#137714,#137706,#137716,.T.); +#137714 = VERTEX_POINT('',#137715); +#137715 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.2)); +#137716 = LINE('',#137717,#137718); +#137717 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.2)); +#137718 = VECTOR('',#137719,1.); +#137719 = DIRECTION('',(0.826599187119,-0.562791065898,0.)); +#137720 = ORIENTED_EDGE('',*,*,#137721,.F.); +#137721 = EDGE_CURVE('',#137722,#137714,#137724,.T.); +#137722 = VERTEX_POINT('',#137723); +#137723 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.2)); +#137724 = LINE('',#137725,#137726); +#137725 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.2)); +#137726 = VECTOR('',#137727,1.); +#137727 = DIRECTION('',(0.310278995296,-0.950645541239,0.)); +#137728 = ORIENTED_EDGE('',*,*,#137729,.F.); +#137729 = EDGE_CURVE('',#137418,#137722,#137730,.T.); +#137730 = LINE('',#137731,#137732); +#137731 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.2)); +#137732 = VECTOR('',#137733,1.); +#137733 = DIRECTION('',(1.,0.,0.)); +#137734 = FACE_BOUND('',#137735,.T.); +#137735 = EDGE_LOOP('',(#137736,#137746,#137754,#137762,#137770,#137778, + #137786,#137794,#137802,#137810,#137818,#137826)); +#137736 = ORIENTED_EDGE('',*,*,#137737,.F.); +#137737 = EDGE_CURVE('',#137738,#137740,#137742,.T.); +#137738 = VERTEX_POINT('',#137739); +#137739 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.2)); +#137740 = VERTEX_POINT('',#137741); +#137741 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.2)); +#137742 = LINE('',#137743,#137744); +#137743 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.2)); +#137744 = VECTOR('',#137745,1.); +#137745 = DIRECTION('',(0.,1.,0.)); +#137746 = ORIENTED_EDGE('',*,*,#137747,.F.); +#137747 = EDGE_CURVE('',#137748,#137738,#137750,.T.); +#137748 = VERTEX_POINT('',#137749); +#137749 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.2)); +#137750 = LINE('',#137751,#137752); +#137751 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.2)); +#137752 = VECTOR('',#137753,1.); +#137753 = DIRECTION('',(-1.,0.,0.)); +#137754 = ORIENTED_EDGE('',*,*,#137755,.F.); +#137755 = EDGE_CURVE('',#137756,#137748,#137758,.T.); +#137756 = VERTEX_POINT('',#137757); +#137757 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.2)); +#137758 = LINE('',#137759,#137760); +#137759 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.2)); +#137760 = VECTOR('',#137761,1.); +#137761 = DIRECTION('',(0.,-1.,0.)); +#137762 = ORIENTED_EDGE('',*,*,#137763,.F.); +#137763 = EDGE_CURVE('',#137764,#137756,#137766,.T.); +#137764 = VERTEX_POINT('',#137765); +#137765 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.2)); +#137766 = LINE('',#137767,#137768); +#137767 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.2)); +#137768 = VECTOR('',#137769,1.); +#137769 = DIRECTION('',(1.,0.,0.)); +#137770 = ORIENTED_EDGE('',*,*,#137771,.F.); +#137771 = EDGE_CURVE('',#137772,#137764,#137774,.T.); +#137772 = VERTEX_POINT('',#137773); +#137773 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.2)); +#137774 = LINE('',#137775,#137776); +#137775 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.2)); +#137776 = VECTOR('',#137777,1.); +#137777 = DIRECTION('',(0.,1.,0.)); +#137778 = ORIENTED_EDGE('',*,*,#137779,.F.); +#137779 = EDGE_CURVE('',#137780,#137772,#137782,.T.); +#137780 = VERTEX_POINT('',#137781); +#137781 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.2)); +#137782 = LINE('',#137783,#137784); +#137783 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.2)); +#137784 = VECTOR('',#137785,1.); +#137785 = DIRECTION('',(-1.,0.,0.)); +#137786 = ORIENTED_EDGE('',*,*,#137787,.F.); +#137787 = EDGE_CURVE('',#137788,#137780,#137790,.T.); +#137788 = VERTEX_POINT('',#137789); +#137789 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.2) + ); +#137790 = LINE('',#137791,#137792); +#137791 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.2) + ); +#137792 = VECTOR('',#137793,1.); +#137793 = DIRECTION('',(0.,1.,0.)); +#137794 = ORIENTED_EDGE('',*,*,#137795,.F.); +#137795 = EDGE_CURVE('',#137796,#137788,#137798,.T.); +#137796 = VERTEX_POINT('',#137797); +#137797 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.2)); +#137798 = LINE('',#137799,#137800); +#137799 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.2)); +#137800 = VECTOR('',#137801,1.); +#137801 = DIRECTION('',(1.,0.,0.)); +#137802 = ORIENTED_EDGE('',*,*,#137803,.F.); +#137803 = EDGE_CURVE('',#137804,#137796,#137806,.T.); +#137804 = VERTEX_POINT('',#137805); +#137805 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.2)); +#137806 = LINE('',#137807,#137808); +#137807 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.2)); +#137808 = VECTOR('',#137809,1.); +#137809 = DIRECTION('',(0.,1.,0.)); +#137810 = ORIENTED_EDGE('',*,*,#137811,.F.); +#137811 = EDGE_CURVE('',#137812,#137804,#137814,.T.); +#137812 = VERTEX_POINT('',#137813); +#137813 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.2) + ); +#137814 = LINE('',#137815,#137816); +#137815 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.2) + ); +#137816 = VECTOR('',#137817,1.); +#137817 = DIRECTION('',(-1.,0.,0.)); +#137818 = ORIENTED_EDGE('',*,*,#137819,.F.); +#137819 = EDGE_CURVE('',#137820,#137812,#137822,.T.); +#137820 = VERTEX_POINT('',#137821); +#137821 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.2)); +#137822 = LINE('',#137823,#137824); +#137823 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.2)); +#137824 = VECTOR('',#137825,1.); +#137825 = DIRECTION('',(0.,1.,0.)); +#137826 = ORIENTED_EDGE('',*,*,#137827,.F.); +#137827 = EDGE_CURVE('',#137740,#137820,#137828,.T.); +#137828 = LINE('',#137829,#137830); +#137829 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.2)); +#137830 = VECTOR('',#137831,1.); +#137831 = DIRECTION('',(1.,0.,0.)); +#137832 = FACE_BOUND('',#137833,.T.); +#137833 = EDGE_LOOP('',(#137834,#137844,#137852,#137860,#137868,#137876, + #137884,#137892,#137900,#137908,#137916,#137924,#137932,#137940)); +#137834 = ORIENTED_EDGE('',*,*,#137835,.F.); +#137835 = EDGE_CURVE('',#137836,#137838,#137840,.T.); +#137836 = VERTEX_POINT('',#137837); +#137837 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.2)); +#137838 = VERTEX_POINT('',#137839); +#137839 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.2)); +#137840 = LINE('',#137841,#137842); +#137841 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.2)); +#137842 = VECTOR('',#137843,1.); +#137843 = DIRECTION('',(0.979770739215,0.200123208493,0.)); +#137844 = ORIENTED_EDGE('',*,*,#137845,.F.); +#137845 = EDGE_CURVE('',#137846,#137836,#137848,.T.); +#137846 = VERTEX_POINT('',#137847); +#137847 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.2)); +#137848 = LINE('',#137849,#137850); +#137849 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.2)); +#137850 = VECTOR('',#137851,1.); +#137851 = DIRECTION('',(0.890605111202,0.454777457556,0.)); +#137852 = ORIENTED_EDGE('',*,*,#137853,.F.); +#137853 = EDGE_CURVE('',#137854,#137846,#137856,.T.); +#137854 = VERTEX_POINT('',#137855); +#137855 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.2)); +#137856 = LINE('',#137857,#137858); +#137857 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.2)); +#137858 = VECTOR('',#137859,1.); +#137859 = DIRECTION('',(0.699624494557,0.714510718335,0.)); +#137860 = ORIENTED_EDGE('',*,*,#137861,.F.); +#137861 = EDGE_CURVE('',#137862,#137854,#137864,.T.); +#137862 = VERTEX_POINT('',#137863); +#137863 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.2)); +#137864 = LINE('',#137865,#137866); +#137865 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.2)); +#137866 = VECTOR('',#137867,1.); +#137867 = DIRECTION('',(0.439714172353,0.898137765954,0.)); +#137868 = ORIENTED_EDGE('',*,*,#137869,.F.); +#137869 = EDGE_CURVE('',#137870,#137862,#137872,.T.); +#137870 = VERTEX_POINT('',#137871); +#137871 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.2)); +#137872 = LINE('',#137873,#137874); +#137873 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.2)); +#137874 = VECTOR('',#137875,1.); +#137875 = DIRECTION('',(0.192182043673,0.981359293067,0.)); +#137876 = ORIENTED_EDGE('',*,*,#137877,.F.); +#137877 = EDGE_CURVE('',#137878,#137870,#137880,.T.); +#137878 = VERTEX_POINT('',#137879); +#137879 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.2)); +#137880 = LINE('',#137881,#137882); +#137881 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.2)); +#137882 = VECTOR('',#137883,1.); +#137883 = DIRECTION('',(0.,1.,0.)); +#137884 = ORIENTED_EDGE('',*,*,#137885,.F.); +#137885 = EDGE_CURVE('',#137886,#137878,#137888,.T.); +#137886 = VERTEX_POINT('',#137887); +#137887 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.2)); +#137888 = LINE('',#137889,#137890); +#137889 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.2)); +#137890 = VECTOR('',#137891,1.); +#137891 = DIRECTION('',(-0.192182147373,0.98135927276,0.)); +#137892 = ORIENTED_EDGE('',*,*,#137893,.F.); +#137893 = EDGE_CURVE('',#137894,#137886,#137896,.T.); +#137894 = VERTEX_POINT('',#137895); +#137895 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.2)); +#137896 = LINE('',#137897,#137898); +#137897 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.2)); +#137898 = VECTOR('',#137899,1.); +#137899 = DIRECTION('',(-0.439714110249,0.898137796358,0.)); +#137900 = ORIENTED_EDGE('',*,*,#137901,.F.); +#137901 = EDGE_CURVE('',#137902,#137894,#137904,.T.); +#137902 = VERTEX_POINT('',#137903); +#137903 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.2)); +#137904 = LINE('',#137905,#137906); +#137905 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.2)); +#137906 = VECTOR('',#137907,1.); +#137907 = DIRECTION('',(-0.699624463288,0.714510748952,0.)); +#137908 = ORIENTED_EDGE('',*,*,#137909,.F.); +#137909 = EDGE_CURVE('',#137910,#137902,#137912,.T.); +#137910 = VERTEX_POINT('',#137911); +#137911 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.2)); +#137912 = LINE('',#137913,#137914); +#137913 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.2)); +#137914 = VECTOR('',#137915,1.); +#137915 = DIRECTION('',(-0.890605087014,0.454777504925,0.)); +#137916 = ORIENTED_EDGE('',*,*,#137917,.F.); +#137917 = EDGE_CURVE('',#137918,#137910,#137920,.T.); +#137918 = VERTEX_POINT('',#137919); +#137919 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.2)); +#137920 = LINE('',#137921,#137922); +#137921 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.2)); +#137922 = VECTOR('',#137923,1.); +#137923 = DIRECTION('',(-0.97977073578,0.200123225311,0.)); +#137924 = ORIENTED_EDGE('',*,*,#137925,.F.); +#137925 = EDGE_CURVE('',#137926,#137918,#137928,.T.); +#137926 = VERTEX_POINT('',#137927); +#137927 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.2)); +#137928 = LINE('',#137929,#137930); +#137929 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.2)); +#137930 = VECTOR('',#137931,1.); +#137931 = DIRECTION('',(-1.,0.,0.)); +#137932 = ORIENTED_EDGE('',*,*,#137933,.F.); +#137933 = EDGE_CURVE('',#137934,#137926,#137936,.T.); +#137934 = VERTEX_POINT('',#137935); +#137935 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.2)); +#137936 = LINE('',#137937,#137938); +#137937 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.2)); +#137938 = VECTOR('',#137939,1.); +#137939 = DIRECTION('',(0.,-1.,0.)); +#137940 = ORIENTED_EDGE('',*,*,#137941,.F.); +#137941 = EDGE_CURVE('',#137838,#137934,#137942,.T.); +#137942 = LINE('',#137943,#137944); +#137943 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.2)); +#137944 = VECTOR('',#137945,1.); +#137945 = DIRECTION('',(1.,0.,0.)); +#137946 = FACE_BOUND('',#137947,.T.); +#137947 = EDGE_LOOP('',(#137948,#137958,#137966,#137974,#137982,#137990, + #137998,#138006)); +#137948 = ORIENTED_EDGE('',*,*,#137949,.F.); +#137949 = EDGE_CURVE('',#137950,#137952,#137954,.T.); +#137950 = VERTEX_POINT('',#137951); +#137951 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.2)); +#137952 = VERTEX_POINT('',#137953); +#137953 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.2)); +#137954 = LINE('',#137955,#137956); +#137955 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.2)); +#137956 = VECTOR('',#137957,1.); +#137957 = DIRECTION('',(0.316227901727,0.948683252814,0.)); +#137958 = ORIENTED_EDGE('',*,*,#137959,.F.); +#137959 = EDGE_CURVE('',#137960,#137950,#137962,.T.); +#137960 = VERTEX_POINT('',#137961); +#137961 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.2)); +#137962 = LINE('',#137963,#137964); +#137963 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.2)); +#137964 = VECTOR('',#137965,1.); +#137965 = DIRECTION('',(-1.,0.,0.)); +#137966 = ORIENTED_EDGE('',*,*,#137967,.F.); +#137967 = EDGE_CURVE('',#137968,#137960,#137970,.T.); +#137968 = VERTEX_POINT('',#137969); +#137969 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.2)); +#137970 = LINE('',#137971,#137972); +#137971 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.2)); +#137972 = VECTOR('',#137973,1.); +#137973 = DIRECTION('',(-0.310280567074,-0.950645028229,0.)); +#137974 = ORIENTED_EDGE('',*,*,#137975,.F.); +#137975 = EDGE_CURVE('',#137976,#137968,#137978,.T.); +#137976 = VERTEX_POINT('',#137977); +#137977 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.2)); +#137978 = LINE('',#137979,#137980); +#137979 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.2)); +#137980 = VECTOR('',#137981,1.); +#137981 = DIRECTION('',(-1.,0.,0.)); +#137982 = ORIENTED_EDGE('',*,*,#137983,.F.); +#137983 = EDGE_CURVE('',#137984,#137976,#137986,.T.); +#137984 = VERTEX_POINT('',#137985); +#137985 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.2)); +#137986 = LINE('',#137987,#137988); +#137987 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.2)); +#137988 = VECTOR('',#137989,1.); +#137989 = DIRECTION('',(-0.310280567074,0.950645028229,0.)); +#137990 = ORIENTED_EDGE('',*,*,#137991,.F.); +#137991 = EDGE_CURVE('',#137992,#137984,#137994,.T.); +#137992 = VERTEX_POINT('',#137993); +#137993 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.2)); +#137994 = LINE('',#137995,#137996); +#137995 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.2)); +#137996 = VECTOR('',#137997,1.); +#137997 = DIRECTION('',(-1.,0.,0.)); +#137998 = ORIENTED_EDGE('',*,*,#137999,.F.); +#137999 = EDGE_CURVE('',#138000,#137992,#138002,.T.); +#138000 = VERTEX_POINT('',#138001); +#138001 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.2)); +#138002 = LINE('',#138003,#138004); +#138003 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.2)); +#138004 = VECTOR('',#138005,1.); +#138005 = DIRECTION('',(0.316227901727,-0.948683252814,0.)); +#138006 = ORIENTED_EDGE('',*,*,#138007,.F.); +#138007 = EDGE_CURVE('',#137952,#138000,#138008,.T.); +#138008 = LINE('',#138009,#138010); +#138009 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.2)); +#138010 = VECTOR('',#138011,1.); +#138011 = DIRECTION('',(1.,0.,0.)); +#138012 = PLANE('',#138013); +#138013 = AXIS2_PLACEMENT_3D('',#138014,#138015,#138016); +#138014 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138015 = DIRECTION('',(0.,0.,-1.)); +#138016 = DIRECTION('',(0.,-1.,0.)); +#138017 = ADVANCED_FACE('',(#138018),#138038,.T.); +#138018 = FACE_BOUND('',#138019,.T.); +#138019 = EDGE_LOOP('',(#138020,#138031)); +#138020 = ORIENTED_EDGE('',*,*,#138021,.T.); +#138021 = EDGE_CURVE('',#138022,#138024,#138026,.T.); +#138022 = VERTEX_POINT('',#138023); +#138023 = CARTESIAN_POINT('',(-0.8134,-8.53712226592,-11.2)); +#138024 = VERTEX_POINT('',#138025); +#138025 = CARTESIAN_POINT('',(0.8134,-8.53712226592,-11.2)); +#138026 = CIRCLE('',#138027,0.8134); +#138027 = AXIS2_PLACEMENT_3D('',#138028,#138029,#138030); +#138028 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#138029 = DIRECTION('',(0.,0.,-1.)); +#138030 = DIRECTION('',(-1.,0.,0.)); +#138031 = ORIENTED_EDGE('',*,*,#138032,.T.); +#138032 = EDGE_CURVE('',#138024,#138022,#138033,.T.); +#138033 = CIRCLE('',#138034,0.8134); +#138034 = AXIS2_PLACEMENT_3D('',#138035,#138036,#138037); +#138035 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#138036 = DIRECTION('',(0.,0.,-1.)); +#138037 = DIRECTION('',(1.,0.,0.)); +#138038 = PLANE('',#138039); +#138039 = AXIS2_PLACEMENT_3D('',#138040,#138041,#138042); +#138040 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138041 = DIRECTION('',(0.,0.,-1.)); +#138042 = DIRECTION('',(0.,-1.,0.)); +#138043 = ADVANCED_FACE('',(#138044),#138159,.T.); +#138044 = FACE_BOUND('',#138045,.T.); +#138045 = EDGE_LOOP('',(#138046,#138056,#138064,#138072,#138080,#138088, + #138096,#138104,#138112,#138120,#138128,#138136,#138145,#138153)); +#138046 = ORIENTED_EDGE('',*,*,#138047,.T.); +#138047 = EDGE_CURVE('',#138048,#138050,#138052,.T.); +#138048 = VERTEX_POINT('',#138049); +#138049 = CARTESIAN_POINT('',(1.875705473106,6.,-11.2)); +#138050 = VERTEX_POINT('',#138051); +#138051 = CARTESIAN_POINT('',(3.43613632781,6.,-11.2)); +#138052 = LINE('',#138053,#138054); +#138053 = CARTESIAN_POINT('',(1.875705473106,6.,-11.2)); +#138054 = VECTOR('',#138055,1.); +#138055 = DIRECTION('',(1.,0.,0.)); +#138056 = ORIENTED_EDGE('',*,*,#138057,.T.); +#138057 = EDGE_CURVE('',#138050,#138058,#138060,.T.); +#138058 = VERTEX_POINT('',#138059); +#138059 = CARTESIAN_POINT('',(3.43613632781,7.638989411558,-11.2)); +#138060 = LINE('',#138061,#138062); +#138061 = CARTESIAN_POINT('',(3.43613632781,6.,-11.2)); +#138062 = VECTOR('',#138063,1.); +#138063 = DIRECTION('',(0.,1.,0.)); +#138064 = ORIENTED_EDGE('',*,*,#138065,.T.); +#138065 = EDGE_CURVE('',#138058,#138066,#138068,.T.); +#138066 = VERTEX_POINT('',#138067); +#138067 = CARTESIAN_POINT('',(4.4662,7.638989411558,-11.2)); +#138068 = LINE('',#138069,#138070); +#138069 = CARTESIAN_POINT('',(3.43613632781,7.638989411558,-11.2)); +#138070 = VECTOR('',#138071,1.); +#138071 = DIRECTION('',(1.,0.,0.)); +#138072 = ORIENTED_EDGE('',*,*,#138073,.T.); +#138073 = EDGE_CURVE('',#138066,#138074,#138076,.T.); +#138074 = VERTEX_POINT('',#138075); +#138075 = CARTESIAN_POINT('',(4.4662,4.4662,-11.2)); +#138076 = LINE('',#138077,#138078); +#138077 = CARTESIAN_POINT('',(4.4662,7.638989411558,-11.2)); +#138078 = VECTOR('',#138079,1.); +#138079 = DIRECTION('',(0.,-1.,0.)); +#138080 = ORIENTED_EDGE('',*,*,#138081,.T.); +#138081 = EDGE_CURVE('',#138074,#138082,#138084,.T.); +#138082 = VERTEX_POINT('',#138083); +#138083 = CARTESIAN_POINT('',(7.665294039299,4.4662,-11.2)); +#138084 = LINE('',#138085,#138086); +#138085 = CARTESIAN_POINT('',(4.4662,4.4662,-11.2)); +#138086 = VECTOR('',#138087,1.); +#138087 = DIRECTION('',(1.,0.,0.)); +#138088 = ORIENTED_EDGE('',*,*,#138089,.T.); +#138089 = EDGE_CURVE('',#138082,#138090,#138092,.T.); +#138090 = VERTEX_POINT('',#138091); +#138091 = CARTESIAN_POINT('',(7.665294039299,3.35479153112,-11.2)); +#138092 = LINE('',#138093,#138094); +#138093 = CARTESIAN_POINT('',(7.665294039299,4.4662,-11.2)); +#138094 = VECTOR('',#138095,1.); +#138095 = DIRECTION('',(0.,-1.,0.)); +#138096 = ORIENTED_EDGE('',*,*,#138097,.T.); +#138097 = EDGE_CURVE('',#138090,#138098,#138100,.T.); +#138098 = VERTEX_POINT('',#138099); +#138099 = CARTESIAN_POINT('',(6.,3.35479153112,-11.2)); +#138100 = LINE('',#138101,#138102); +#138101 = CARTESIAN_POINT('',(7.665294039299,3.35479153112,-11.2)); +#138102 = VECTOR('',#138103,1.); +#138103 = DIRECTION('',(-1.,0.,0.)); +#138104 = ORIENTED_EDGE('',*,*,#138105,.T.); +#138105 = EDGE_CURVE('',#138098,#138106,#138108,.T.); +#138106 = VERTEX_POINT('',#138107); +#138107 = CARTESIAN_POINT('',(6.,2.4,-11.2)); +#138108 = LINE('',#138109,#138110); +#138109 = CARTESIAN_POINT('',(6.,3.35479153112,-11.2)); +#138110 = VECTOR('',#138111,1.); +#138111 = DIRECTION('',(0.,-1.,0.)); +#138112 = ORIENTED_EDGE('',*,*,#138113,.T.); +#138113 = EDGE_CURVE('',#138106,#138114,#138116,.T.); +#138114 = VERTEX_POINT('',#138115); +#138115 = CARTESIAN_POINT('',(5.3,2.4,-11.2)); +#138116 = LINE('',#138117,#138118); +#138117 = CARTESIAN_POINT('',(6.,2.4,-11.2)); +#138118 = VECTOR('',#138119,1.); +#138119 = DIRECTION('',(-1.,0.,0.)); +#138120 = ORIENTED_EDGE('',*,*,#138121,.T.); +#138121 = EDGE_CURVE('',#138114,#138122,#138124,.T.); +#138122 = VERTEX_POINT('',#138123); +#138123 = CARTESIAN_POINT('',(5.3,1.19462226592,-11.2)); +#138124 = LINE('',#138125,#138126); +#138125 = CARTESIAN_POINT('',(5.3,2.4,-11.2)); +#138126 = VECTOR('',#138127,1.); +#138127 = DIRECTION('',(0.,-1.,0.)); +#138128 = ORIENTED_EDGE('',*,*,#138129,.T.); +#138129 = EDGE_CURVE('',#138122,#138130,#138132,.T.); +#138130 = VERTEX_POINT('',#138131); +#138131 = CARTESIAN_POINT('',(4.406227607803,1.19462226592,-11.2)); +#138132 = LINE('',#138133,#138134); +#138133 = CARTESIAN_POINT('',(5.3,1.19462226592,-11.2)); +#138134 = VECTOR('',#138135,1.); +#138135 = DIRECTION('',(-1.,0.,0.)); +#138136 = ORIENTED_EDGE('',*,*,#138137,.F.); +#138137 = EDGE_CURVE('',#138138,#138130,#138140,.T.); +#138138 = VERTEX_POINT('',#138139); +#138139 = CARTESIAN_POINT('',(0.500005473106,4.5378363365,-11.2)); +#138140 = CIRCLE('',#138141,4.5653); +#138141 = AXIS2_PLACEMENT_3D('',#138142,#138143,#138144); +#138142 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#138143 = DIRECTION('',(0.,0.,-1.)); +#138144 = DIRECTION('',(0.109523026549,0.993984258756,0.)); +#138145 = ORIENTED_EDGE('',*,*,#138146,.F.); +#138146 = EDGE_CURVE('',#138147,#138138,#138149,.T.); +#138147 = VERTEX_POINT('',#138148); +#138148 = CARTESIAN_POINT('',(0.500005473106,6.,-11.2)); +#138149 = LINE('',#138150,#138151); +#138150 = CARTESIAN_POINT('',(0.500005473106,6.,-11.2)); +#138151 = VECTOR('',#138152,1.); +#138152 = DIRECTION('',(0.,-1.,0.)); +#138153 = ORIENTED_EDGE('',*,*,#138154,.F.); +#138154 = EDGE_CURVE('',#138048,#138147,#138155,.T.); +#138155 = LINE('',#138156,#138157); +#138156 = CARTESIAN_POINT('',(1.875705473106,6.,-11.2)); +#138157 = VECTOR('',#138158,1.); +#138158 = DIRECTION('',(-1.,0.,0.)); +#138159 = PLANE('',#138160); +#138160 = AXIS2_PLACEMENT_3D('',#138161,#138162,#138163); +#138161 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138162 = DIRECTION('',(0.,0.,-1.)); +#138163 = DIRECTION('',(0.,-1.,0.)); +#138164 = ADVANCED_FACE('',(#138165),#138264,.T.); +#138165 = FACE_BOUND('',#138166,.T.); +#138166 = EDGE_LOOP('',(#138167,#138177,#138185,#138193,#138201,#138209, + #138217,#138226,#138234,#138242,#138250,#138258)); +#138167 = ORIENTED_EDGE('',*,*,#138168,.T.); +#138168 = EDGE_CURVE('',#138169,#138171,#138173,.T.); +#138169 = VERTEX_POINT('',#138170); +#138170 = CARTESIAN_POINT('',(-4.4662,4.4662,-11.2)); +#138171 = VERTEX_POINT('',#138172); +#138172 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-11.2)); +#138173 = LINE('',#138174,#138175); +#138174 = CARTESIAN_POINT('',(-4.4662,4.4662,-11.2)); +#138175 = VECTOR('',#138176,1.); +#138176 = DIRECTION('',(0.,1.,0.)); +#138177 = ORIENTED_EDGE('',*,*,#138178,.T.); +#138178 = EDGE_CURVE('',#138171,#138179,#138181,.T.); +#138179 = VERTEX_POINT('',#138180); +#138180 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558,-11.2)); +#138181 = LINE('',#138182,#138183); +#138182 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-11.2)); +#138183 = VECTOR('',#138184,1.); +#138184 = DIRECTION('',(1.,0.,0.)); +#138185 = ORIENTED_EDGE('',*,*,#138186,.T.); +#138186 = EDGE_CURVE('',#138179,#138187,#138189,.T.); +#138187 = VERTEX_POINT('',#138188); +#138188 = CARTESIAN_POINT('',(-3.43613632781,6.,-11.2)); +#138189 = LINE('',#138190,#138191); +#138190 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558,-11.2)); +#138191 = VECTOR('',#138192,1.); +#138192 = DIRECTION('',(0.,-1.,0.)); +#138193 = ORIENTED_EDGE('',*,*,#138194,.T.); +#138194 = EDGE_CURVE('',#138187,#138195,#138197,.T.); +#138195 = VERTEX_POINT('',#138196); +#138196 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.2)); +#138197 = LINE('',#138198,#138199); +#138198 = CARTESIAN_POINT('',(-3.43613632781,6.,-11.2)); +#138199 = VECTOR('',#138200,1.); +#138200 = DIRECTION('',(1.,0.,0.)); +#138201 = ORIENTED_EDGE('',*,*,#138202,.F.); +#138202 = EDGE_CURVE('',#138203,#138195,#138205,.T.); +#138203 = VERTEX_POINT('',#138204); +#138204 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.2)); +#138205 = LINE('',#138206,#138207); +#138206 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.2)); +#138207 = VECTOR('',#138208,1.); +#138208 = DIRECTION('',(-1.,0.,0.)); +#138209 = ORIENTED_EDGE('',*,*,#138210,.F.); +#138210 = EDGE_CURVE('',#138211,#138203,#138213,.T.); +#138211 = VERTEX_POINT('',#138212); +#138212 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.2)); +#138213 = LINE('',#138214,#138215); +#138214 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.2)); +#138215 = VECTOR('',#138216,1.); +#138216 = DIRECTION('',(0.,1.,0.)); +#138217 = ORIENTED_EDGE('',*,*,#138218,.F.); +#138218 = EDGE_CURVE('',#138219,#138211,#138221,.T.); +#138219 = VERTEX_POINT('',#138220); +#138220 = CARTESIAN_POINT('',(-4.406227607803,1.19462226592,-11.2)); +#138221 = CIRCLE('',#138222,4.5653); +#138222 = AXIS2_PLACEMENT_3D('',#138223,#138224,#138225); +#138223 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#138224 = DIRECTION('',(0.,0.,-1.)); +#138225 = DIRECTION('',(-0.96515620174,0.26167442795,0.)); +#138226 = ORIENTED_EDGE('',*,*,#138227,.T.); +#138227 = EDGE_CURVE('',#138219,#138228,#138230,.T.); +#138228 = VERTEX_POINT('',#138229); +#138229 = CARTESIAN_POINT('',(-5.3,1.19462226592,-11.2)); +#138230 = LINE('',#138231,#138232); +#138231 = CARTESIAN_POINT('',(-4.406227607803,1.19462226592,-11.2)); +#138232 = VECTOR('',#138233,1.); +#138233 = DIRECTION('',(-1.,0.,0.)); +#138234 = ORIENTED_EDGE('',*,*,#138235,.T.); +#138235 = EDGE_CURVE('',#138228,#138236,#138238,.T.); +#138236 = VERTEX_POINT('',#138237); +#138237 = CARTESIAN_POINT('',(-5.3,2.4,-11.2)); +#138238 = LINE('',#138239,#138240); +#138239 = CARTESIAN_POINT('',(-5.3,1.19462226592,-11.2)); +#138240 = VECTOR('',#138241,1.); +#138241 = DIRECTION('',(0.,1.,0.)); +#138242 = ORIENTED_EDGE('',*,*,#138243,.F.); +#138243 = EDGE_CURVE('',#138244,#138236,#138246,.T.); +#138244 = VERTEX_POINT('',#138245); +#138245 = CARTESIAN_POINT('',(-7.6,2.4,-11.2)); +#138246 = LINE('',#138247,#138248); +#138247 = CARTESIAN_POINT('',(-7.6,2.4,-11.2)); +#138248 = VECTOR('',#138249,1.); +#138249 = DIRECTION('',(1.,0.,0.)); +#138250 = ORIENTED_EDGE('',*,*,#138251,.F.); +#138251 = EDGE_CURVE('',#138252,#138244,#138254,.T.); +#138252 = VERTEX_POINT('',#138253); +#138253 = CARTESIAN_POINT('',(-7.6,4.4662,-11.2)); +#138254 = LINE('',#138255,#138256); +#138255 = CARTESIAN_POINT('',(-7.6,4.4662,-11.2)); +#138256 = VECTOR('',#138257,1.); +#138257 = DIRECTION('',(0.,-1.,0.)); +#138258 = ORIENTED_EDGE('',*,*,#138259,.T.); +#138259 = EDGE_CURVE('',#138252,#138169,#138260,.T.); +#138260 = LINE('',#138261,#138262); +#138261 = CARTESIAN_POINT('',(-7.6,4.4662,-11.2)); +#138262 = VECTOR('',#138263,1.); +#138263 = DIRECTION('',(1.,0.,0.)); +#138264 = PLANE('',#138265); +#138265 = AXIS2_PLACEMENT_3D('',#138266,#138267,#138268); +#138266 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138267 = DIRECTION('',(0.,0.,-1.)); +#138268 = DIRECTION('',(0.,-1.,0.)); +#138269 = ADVANCED_FACE('',(#138270,#138451,#138471,#138505,#138539, + #138573),#138607,.T.); +#138270 = FACE_BOUND('',#138271,.T.); +#138271 = EDGE_LOOP('',(#138272,#138282,#138290,#138299,#138307,#138315, + #138323,#138331,#138339,#138347,#138355,#138363,#138371,#138379, + #138388,#138396,#138405,#138413,#138421,#138429,#138437,#138445)); +#138272 = ORIENTED_EDGE('',*,*,#138273,.T.); +#138273 = EDGE_CURVE('',#138274,#138276,#138278,.T.); +#138274 = VERTEX_POINT('',#138275); +#138275 = CARTESIAN_POINT('',(-5.3,-2.4,-11.2)); +#138276 = VERTEX_POINT('',#138277); +#138277 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-11.2)); +#138278 = LINE('',#138279,#138280); +#138279 = CARTESIAN_POINT('',(-5.3,-2.4,-11.2)); +#138280 = VECTOR('',#138281,1.); +#138281 = DIRECTION('',(0.,1.,0.)); +#138282 = ORIENTED_EDGE('',*,*,#138283,.T.); +#138283 = EDGE_CURVE('',#138276,#138284,#138286,.T.); +#138284 = VERTEX_POINT('',#138285); +#138285 = CARTESIAN_POINT('',(-4.406227607803,-1.19462226592,-11.2)); +#138286 = LINE('',#138287,#138288); +#138287 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-11.2)); +#138288 = VECTOR('',#138289,1.); +#138289 = DIRECTION('',(1.,0.,0.)); +#138290 = ORIENTED_EDGE('',*,*,#138291,.F.); +#138291 = EDGE_CURVE('',#138292,#138284,#138294,.T.); +#138292 = VERTEX_POINT('',#138293); +#138293 = CARTESIAN_POINT('',(4.406227607803,-1.19462226592,-11.2)); +#138294 = CIRCLE('',#138295,4.5653); +#138295 = AXIS2_PLACEMENT_3D('',#138296,#138297,#138298); +#138296 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#138297 = DIRECTION('',(0.,0.,-1.)); +#138298 = DIRECTION('',(0.96515620174,-0.26167442795,0.)); +#138299 = ORIENTED_EDGE('',*,*,#138300,.T.); +#138300 = EDGE_CURVE('',#138292,#138301,#138303,.T.); +#138301 = VERTEX_POINT('',#138302); +#138302 = CARTESIAN_POINT('',(5.3,-1.19462226592,-11.2)); +#138303 = LINE('',#138304,#138305); +#138304 = CARTESIAN_POINT('',(4.406227607803,-1.19462226592,-11.2)); +#138305 = VECTOR('',#138306,1.); +#138306 = DIRECTION('',(1.,0.,0.)); +#138307 = ORIENTED_EDGE('',*,*,#138308,.T.); +#138308 = EDGE_CURVE('',#138301,#138309,#138311,.T.); +#138309 = VERTEX_POINT('',#138310); +#138310 = CARTESIAN_POINT('',(5.3,-2.4,-11.2)); +#138311 = LINE('',#138312,#138313); +#138312 = CARTESIAN_POINT('',(5.3,-1.19462226592,-11.2)); +#138313 = VECTOR('',#138314,1.); +#138314 = DIRECTION('',(0.,-1.,0.)); +#138315 = ORIENTED_EDGE('',*,*,#138316,.T.); +#138316 = EDGE_CURVE('',#138309,#138317,#138319,.T.); +#138317 = VERTEX_POINT('',#138318); +#138318 = CARTESIAN_POINT('',(6.,-2.4,-11.2)); +#138319 = LINE('',#138320,#138321); +#138320 = CARTESIAN_POINT('',(5.3,-2.4,-11.2)); +#138321 = VECTOR('',#138322,1.); +#138322 = DIRECTION('',(1.,0.,0.)); +#138323 = ORIENTED_EDGE('',*,*,#138324,.T.); +#138324 = EDGE_CURVE('',#138317,#138325,#138327,.T.); +#138325 = VERTEX_POINT('',#138326); +#138326 = CARTESIAN_POINT('',(6.,-3.35479153112,-11.2)); +#138327 = LINE('',#138328,#138329); +#138328 = CARTESIAN_POINT('',(6.,-2.4,-11.2)); +#138329 = VECTOR('',#138330,1.); +#138330 = DIRECTION('',(0.,-1.,0.)); +#138331 = ORIENTED_EDGE('',*,*,#138332,.T.); +#138332 = EDGE_CURVE('',#138325,#138333,#138335,.T.); +#138333 = VERTEX_POINT('',#138334); +#138334 = CARTESIAN_POINT('',(7.665294039299,-3.35479153112,-11.2)); +#138335 = LINE('',#138336,#138337); +#138336 = CARTESIAN_POINT('',(6.,-3.35479153112,-11.2)); +#138337 = VECTOR('',#138338,1.); +#138338 = DIRECTION('',(1.,0.,0.)); +#138339 = ORIENTED_EDGE('',*,*,#138340,.T.); +#138340 = EDGE_CURVE('',#138333,#138341,#138343,.T.); +#138341 = VERTEX_POINT('',#138342); +#138342 = CARTESIAN_POINT('',(7.665294039299,-4.4662,-11.2)); +#138343 = LINE('',#138344,#138345); +#138344 = CARTESIAN_POINT('',(7.665294039299,-3.35479153112,-11.2)); +#138345 = VECTOR('',#138346,1.); +#138346 = DIRECTION('',(0.,-1.,0.)); +#138347 = ORIENTED_EDGE('',*,*,#138348,.T.); +#138348 = EDGE_CURVE('',#138341,#138349,#138351,.T.); +#138349 = VERTEX_POINT('',#138350); +#138350 = CARTESIAN_POINT('',(4.4662,-4.4662,-11.2)); +#138351 = LINE('',#138352,#138353); +#138352 = CARTESIAN_POINT('',(7.665294039299,-4.4662,-11.2)); +#138353 = VECTOR('',#138354,1.); +#138354 = DIRECTION('',(-1.,0.,0.)); +#138355 = ORIENTED_EDGE('',*,*,#138356,.F.); +#138356 = EDGE_CURVE('',#138357,#138349,#138359,.T.); +#138357 = VERTEX_POINT('',#138358); +#138358 = CARTESIAN_POINT('',(4.4662,-6.,-11.2)); +#138359 = LINE('',#138360,#138361); +#138360 = CARTESIAN_POINT('',(4.4662,-6.,-11.2)); +#138361 = VECTOR('',#138362,1.); +#138362 = DIRECTION('',(0.,1.,0.)); +#138363 = ORIENTED_EDGE('',*,*,#138364,.T.); +#138364 = EDGE_CURVE('',#138357,#138365,#138367,.T.); +#138365 = VERTEX_POINT('',#138366); +#138366 = CARTESIAN_POINT('',(4.3,-6.,-11.2)); +#138367 = LINE('',#138368,#138369); +#138368 = CARTESIAN_POINT('',(4.4662,-6.,-11.2)); +#138369 = VECTOR('',#138370,1.); +#138370 = DIRECTION('',(-1.,1.068806762575E-14,0.)); +#138371 = ORIENTED_EDGE('',*,*,#138372,.T.); +#138372 = EDGE_CURVE('',#138365,#138373,#138375,.T.); +#138373 = VERTEX_POINT('',#138374); +#138374 = CARTESIAN_POINT('',(4.3,-10.6,-11.2)); +#138375 = LINE('',#138376,#138377); +#138376 = CARTESIAN_POINT('',(4.3,-6.,-11.2)); +#138377 = VECTOR('',#138378,1.); +#138378 = DIRECTION('',(0.,-1.,0.)); +#138379 = ORIENTED_EDGE('',*,*,#138380,.T.); +#138380 = EDGE_CURVE('',#138373,#138381,#138383,.T.); +#138381 = VERTEX_POINT('',#138382); +#138382 = CARTESIAN_POINT('',(3.3,-11.6,-11.2)); +#138383 = CIRCLE('',#138384,1.); +#138384 = AXIS2_PLACEMENT_3D('',#138385,#138386,#138387); +#138385 = CARTESIAN_POINT('',(3.3,-10.6,-11.2)); +#138386 = DIRECTION('',(0.,0.,-1.)); +#138387 = DIRECTION('',(1.,0.,0.)); +#138388 = ORIENTED_EDGE('',*,*,#138389,.T.); +#138389 = EDGE_CURVE('',#138381,#138390,#138392,.T.); +#138390 = VERTEX_POINT('',#138391); +#138391 = CARTESIAN_POINT('',(-3.3,-11.6,-11.2)); +#138392 = LINE('',#138393,#138394); +#138393 = CARTESIAN_POINT('',(3.3,-11.6,-11.2)); +#138394 = VECTOR('',#138395,1.); +#138395 = DIRECTION('',(-1.,0.,0.)); +#138396 = ORIENTED_EDGE('',*,*,#138397,.T.); +#138397 = EDGE_CURVE('',#138390,#138398,#138400,.T.); +#138398 = VERTEX_POINT('',#138399); +#138399 = CARTESIAN_POINT('',(-4.3,-10.6,-11.2)); +#138400 = CIRCLE('',#138401,1.); +#138401 = AXIS2_PLACEMENT_3D('',#138402,#138403,#138404); +#138402 = CARTESIAN_POINT('',(-3.3,-10.6,-11.2)); +#138403 = DIRECTION('',(0.,0.,-1.)); +#138404 = DIRECTION('',(0.,-1.,0.)); +#138405 = ORIENTED_EDGE('',*,*,#138406,.T.); +#138406 = EDGE_CURVE('',#138398,#138407,#138409,.T.); +#138407 = VERTEX_POINT('',#138408); +#138408 = CARTESIAN_POINT('',(-4.3,-6.,-11.2)); +#138409 = LINE('',#138410,#138411); +#138410 = CARTESIAN_POINT('',(-4.3,-10.6,-11.2)); +#138411 = VECTOR('',#138412,1.); +#138412 = DIRECTION('',(0.,1.,0.)); +#138413 = ORIENTED_EDGE('',*,*,#138414,.T.); +#138414 = EDGE_CURVE('',#138407,#138415,#138417,.T.); +#138415 = VERTEX_POINT('',#138416); +#138416 = CARTESIAN_POINT('',(-4.4662,-6.,-11.2)); +#138417 = LINE('',#138418,#138419); +#138418 = CARTESIAN_POINT('',(-4.3,-6.,-11.2)); +#138419 = VECTOR('',#138420,1.); +#138420 = DIRECTION('',(-1.,0.,0.)); +#138421 = ORIENTED_EDGE('',*,*,#138422,.F.); +#138422 = EDGE_CURVE('',#138423,#138415,#138425,.T.); +#138423 = VERTEX_POINT('',#138424); +#138424 = CARTESIAN_POINT('',(-4.4662,-4.4662,-11.2)); +#138425 = LINE('',#138426,#138427); +#138426 = CARTESIAN_POINT('',(-4.4662,-4.4662,-11.2)); +#138427 = VECTOR('',#138428,1.); +#138428 = DIRECTION('',(0.,-1.,0.)); +#138429 = ORIENTED_EDGE('',*,*,#138430,.T.); +#138430 = EDGE_CURVE('',#138423,#138431,#138433,.T.); +#138431 = VERTEX_POINT('',#138432); +#138432 = CARTESIAN_POINT('',(-7.6,-4.4662,-11.2)); +#138433 = LINE('',#138434,#138435); +#138434 = CARTESIAN_POINT('',(-4.4662,-4.4662,-11.2)); +#138435 = VECTOR('',#138436,1.); +#138436 = DIRECTION('',(-1.,0.,0.)); +#138437 = ORIENTED_EDGE('',*,*,#138438,.F.); +#138438 = EDGE_CURVE('',#138439,#138431,#138441,.T.); +#138439 = VERTEX_POINT('',#138440); +#138440 = CARTESIAN_POINT('',(-7.6,-2.4,-11.2)); +#138441 = LINE('',#138442,#138443); +#138442 = CARTESIAN_POINT('',(-7.6,-2.4,-11.2)); +#138443 = VECTOR('',#138444,1.); +#138444 = DIRECTION('',(0.,-1.,0.)); +#138445 = ORIENTED_EDGE('',*,*,#138446,.F.); +#138446 = EDGE_CURVE('',#138274,#138439,#138447,.T.); +#138447 = LINE('',#138448,#138449); +#138448 = CARTESIAN_POINT('',(-5.3,-2.4,-11.2)); +#138449 = VECTOR('',#138450,1.); +#138450 = DIRECTION('',(-1.,0.,0.)); +#138451 = FACE_BOUND('',#138452,.T.); +#138452 = EDGE_LOOP('',(#138453,#138464)); +#138453 = ORIENTED_EDGE('',*,*,#138454,.F.); +#138454 = EDGE_CURVE('',#138455,#138457,#138459,.T.); +#138455 = VERTEX_POINT('',#138456); +#138456 = CARTESIAN_POINT('',(1.1474,-8.53712226592,-11.2)); +#138457 = VERTEX_POINT('',#138458); +#138458 = CARTESIAN_POINT('',(-1.1474,-8.53712226592,-11.2)); +#138459 = CIRCLE('',#138460,1.1474); +#138460 = AXIS2_PLACEMENT_3D('',#138461,#138462,#138463); +#138461 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#138462 = DIRECTION('',(0.,0.,-1.)); +#138463 = DIRECTION('',(1.,0.,0.)); +#138464 = ORIENTED_EDGE('',*,*,#138465,.F.); +#138465 = EDGE_CURVE('',#138457,#138455,#138466,.T.); +#138466 = CIRCLE('',#138467,1.1474); +#138467 = AXIS2_PLACEMENT_3D('',#138468,#138469,#138470); +#138468 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#138469 = DIRECTION('',(0.,0.,-1.)); +#138470 = DIRECTION('',(-1.,0.,0.)); +#138471 = FACE_BOUND('',#138472,.T.); +#138472 = EDGE_LOOP('',(#138473,#138483,#138491,#138499)); +#138473 = ORIENTED_EDGE('',*,*,#138474,.F.); +#138474 = EDGE_CURVE('',#138475,#138477,#138479,.T.); +#138475 = VERTEX_POINT('',#138476); +#138476 = CARTESIAN_POINT('',(3.375,-5.35,-11.2)); +#138477 = VERTEX_POINT('',#138478); +#138478 = CARTESIAN_POINT('',(3.375,-6.15,-11.2)); +#138479 = LINE('',#138480,#138481); +#138480 = CARTESIAN_POINT('',(3.375,-5.35,-11.2)); +#138481 = VECTOR('',#138482,1.); +#138482 = DIRECTION('',(0.,-1.,0.)); +#138483 = ORIENTED_EDGE('',*,*,#138484,.F.); +#138484 = EDGE_CURVE('',#138485,#138475,#138487,.T.); +#138485 = VERTEX_POINT('',#138486); +#138486 = CARTESIAN_POINT('',(3.125,-5.35,-11.2)); +#138487 = LINE('',#138488,#138489); +#138488 = CARTESIAN_POINT('',(3.125,-5.35,-11.2)); +#138489 = VECTOR('',#138490,1.); +#138490 = DIRECTION('',(1.,0.,0.)); +#138491 = ORIENTED_EDGE('',*,*,#138492,.F.); +#138492 = EDGE_CURVE('',#138493,#138485,#138495,.T.); +#138493 = VERTEX_POINT('',#138494); +#138494 = CARTESIAN_POINT('',(3.125,-6.15,-11.2)); +#138495 = LINE('',#138496,#138497); +#138496 = CARTESIAN_POINT('',(3.125,-6.15,-11.2)); +#138497 = VECTOR('',#138498,1.); +#138498 = DIRECTION('',(0.,1.,0.)); +#138499 = ORIENTED_EDGE('',*,*,#138500,.F.); +#138500 = EDGE_CURVE('',#138477,#138493,#138501,.T.); +#138501 = LINE('',#138502,#138503); +#138502 = CARTESIAN_POINT('',(3.375,-6.15,-11.2)); +#138503 = VECTOR('',#138504,1.); +#138504 = DIRECTION('',(-1.,0.,0.)); +#138505 = FACE_BOUND('',#138506,.T.); +#138506 = EDGE_LOOP('',(#138507,#138517,#138525,#138533)); +#138507 = ORIENTED_EDGE('',*,*,#138508,.F.); +#138508 = EDGE_CURVE('',#138509,#138511,#138513,.T.); +#138509 = VERTEX_POINT('',#138510); +#138510 = CARTESIAN_POINT('',(3.125,-9.85,-11.2)); +#138511 = VERTEX_POINT('',#138512); +#138512 = CARTESIAN_POINT('',(3.375,-9.85,-11.2)); +#138513 = LINE('',#138514,#138515); +#138514 = CARTESIAN_POINT('',(3.125,-9.85,-11.2)); +#138515 = VECTOR('',#138516,1.); +#138516 = DIRECTION('',(1.,0.,0.)); +#138517 = ORIENTED_EDGE('',*,*,#138518,.F.); +#138518 = EDGE_CURVE('',#138519,#138509,#138521,.T.); +#138519 = VERTEX_POINT('',#138520); +#138520 = CARTESIAN_POINT('',(3.125,-10.65,-11.2)); +#138521 = LINE('',#138522,#138523); +#138522 = CARTESIAN_POINT('',(3.125,-10.65,-11.2)); +#138523 = VECTOR('',#138524,1.); +#138524 = DIRECTION('',(0.,1.,0.)); +#138525 = ORIENTED_EDGE('',*,*,#138526,.F.); +#138526 = EDGE_CURVE('',#138527,#138519,#138529,.T.); +#138527 = VERTEX_POINT('',#138528); +#138528 = CARTESIAN_POINT('',(3.375,-10.65,-11.2)); +#138529 = LINE('',#138530,#138531); +#138530 = CARTESIAN_POINT('',(3.375,-10.65,-11.2)); +#138531 = VECTOR('',#138532,1.); +#138532 = DIRECTION('',(-1.,0.,0.)); +#138533 = ORIENTED_EDGE('',*,*,#138534,.F.); +#138534 = EDGE_CURVE('',#138511,#138527,#138535,.T.); +#138535 = LINE('',#138536,#138537); +#138536 = CARTESIAN_POINT('',(3.375,-9.85,-11.2)); +#138537 = VECTOR('',#138538,1.); +#138538 = DIRECTION('',(0.,-1.,0.)); +#138539 = FACE_BOUND('',#138540,.T.); +#138540 = EDGE_LOOP('',(#138541,#138551,#138559,#138567)); +#138541 = ORIENTED_EDGE('',*,*,#138542,.F.); +#138542 = EDGE_CURVE('',#138543,#138545,#138547,.T.); +#138543 = VERTEX_POINT('',#138544); +#138544 = CARTESIAN_POINT('',(-3.125,-6.15,-11.2)); +#138545 = VERTEX_POINT('',#138546); +#138546 = CARTESIAN_POINT('',(-3.375,-6.15,-11.2)); +#138547 = LINE('',#138548,#138549); +#138548 = CARTESIAN_POINT('',(-3.125,-6.15,-11.2)); +#138549 = VECTOR('',#138550,1.); +#138550 = DIRECTION('',(-1.,0.,0.)); +#138551 = ORIENTED_EDGE('',*,*,#138552,.F.); +#138552 = EDGE_CURVE('',#138553,#138543,#138555,.T.); +#138553 = VERTEX_POINT('',#138554); +#138554 = CARTESIAN_POINT('',(-3.125,-5.35,-11.2)); +#138555 = LINE('',#138556,#138557); +#138556 = CARTESIAN_POINT('',(-3.125,-5.35,-11.2)); +#138557 = VECTOR('',#138558,1.); +#138558 = DIRECTION('',(0.,-1.,0.)); +#138559 = ORIENTED_EDGE('',*,*,#138560,.F.); +#138560 = EDGE_CURVE('',#138561,#138553,#138563,.T.); +#138561 = VERTEX_POINT('',#138562); +#138562 = CARTESIAN_POINT('',(-3.375,-5.35,-11.2)); +#138563 = LINE('',#138564,#138565); +#138564 = CARTESIAN_POINT('',(-3.375,-5.35,-11.2)); +#138565 = VECTOR('',#138566,1.); +#138566 = DIRECTION('',(1.,0.,0.)); +#138567 = ORIENTED_EDGE('',*,*,#138568,.F.); +#138568 = EDGE_CURVE('',#138545,#138561,#138569,.T.); +#138569 = LINE('',#138570,#138571); +#138570 = CARTESIAN_POINT('',(-3.375,-6.15,-11.2)); +#138571 = VECTOR('',#138572,1.); +#138572 = DIRECTION('',(0.,1.,0.)); +#138573 = FACE_BOUND('',#138574,.T.); +#138574 = EDGE_LOOP('',(#138575,#138585,#138593,#138601)); +#138575 = ORIENTED_EDGE('',*,*,#138576,.F.); +#138576 = EDGE_CURVE('',#138577,#138579,#138581,.T.); +#138577 = VERTEX_POINT('',#138578); +#138578 = CARTESIAN_POINT('',(-3.375,-10.65,-11.2)); +#138579 = VERTEX_POINT('',#138580); +#138580 = CARTESIAN_POINT('',(-3.375,-9.85,-11.2)); +#138581 = LINE('',#138582,#138583); +#138582 = CARTESIAN_POINT('',(-3.375,-10.65,-11.2)); +#138583 = VECTOR('',#138584,1.); +#138584 = DIRECTION('',(0.,1.,0.)); +#138585 = ORIENTED_EDGE('',*,*,#138586,.F.); +#138586 = EDGE_CURVE('',#138587,#138577,#138589,.T.); +#138587 = VERTEX_POINT('',#138588); +#138588 = CARTESIAN_POINT('',(-3.125,-10.65,-11.2)); +#138589 = LINE('',#138590,#138591); +#138590 = CARTESIAN_POINT('',(-3.125,-10.65,-11.2)); +#138591 = VECTOR('',#138592,1.); +#138592 = DIRECTION('',(-1.,0.,0.)); +#138593 = ORIENTED_EDGE('',*,*,#138594,.F.); +#138594 = EDGE_CURVE('',#138595,#138587,#138597,.T.); +#138595 = VERTEX_POINT('',#138596); +#138596 = CARTESIAN_POINT('',(-3.125,-9.85,-11.2)); +#138597 = LINE('',#138598,#138599); +#138598 = CARTESIAN_POINT('',(-3.125,-9.85,-11.2)); +#138599 = VECTOR('',#138600,1.); +#138600 = DIRECTION('',(0.,-1.,0.)); +#138601 = ORIENTED_EDGE('',*,*,#138602,.F.); +#138602 = EDGE_CURVE('',#138579,#138595,#138603,.T.); +#138603 = LINE('',#138604,#138605); +#138604 = CARTESIAN_POINT('',(-3.375,-9.85,-11.2)); +#138605 = VECTOR('',#138606,1.); +#138606 = DIRECTION('',(1.,0.,0.)); +#138607 = PLANE('',#138608); +#138608 = AXIS2_PLACEMENT_3D('',#138609,#138610,#138611); +#138609 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138610 = DIRECTION('',(0.,0.,-1.)); +#138611 = DIRECTION('',(0.,-1.,0.)); +#138612 = ADVANCED_FACE('',(#138613),#138711,.T.); +#138613 = FACE_BOUND('',#138614,.T.); +#138614 = EDGE_LOOP('',(#138615,#138625,#138633,#138641,#138649,#138657, + #138665,#138673,#138681,#138689,#138697,#138705)); +#138615 = ORIENTED_EDGE('',*,*,#138616,.F.); +#138616 = EDGE_CURVE('',#138617,#138619,#138621,.T.); +#138617 = VERTEX_POINT('',#138618); +#138618 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.2)); +#138619 = VERTEX_POINT('',#138620); +#138620 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.2)); +#138621 = LINE('',#138622,#138623); +#138622 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.2)); +#138623 = VECTOR('',#138624,1.); +#138624 = DIRECTION('',(0.,1.,0.)); +#138625 = ORIENTED_EDGE('',*,*,#138626,.F.); +#138626 = EDGE_CURVE('',#138627,#138617,#138629,.T.); +#138627 = VERTEX_POINT('',#138628); +#138628 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.2)); +#138629 = LINE('',#138630,#138631); +#138630 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.2)); +#138631 = VECTOR('',#138632,1.); +#138632 = DIRECTION('',(1.,0.,0.)); +#138633 = ORIENTED_EDGE('',*,*,#138634,.F.); +#138634 = EDGE_CURVE('',#138635,#138627,#138637,.T.); +#138635 = VERTEX_POINT('',#138636); +#138636 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.2)); +#138637 = LINE('',#138638,#138639); +#138638 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.2)); +#138639 = VECTOR('',#138640,1.); +#138640 = DIRECTION('',(0.968917661144,-0.247383439065,0.)); +#138641 = ORIENTED_EDGE('',*,*,#138642,.F.); +#138642 = EDGE_CURVE('',#138643,#138635,#138645,.T.); +#138643 = VERTEX_POINT('',#138644); +#138644 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.2)); +#138645 = LINE('',#138646,#138647); +#138646 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.2)); +#138647 = VECTOR('',#138648,1.); +#138648 = DIRECTION('',(0.826599187119,-0.562791065898,0.)); +#138649 = ORIENTED_EDGE('',*,*,#138650,.F.); +#138650 = EDGE_CURVE('',#138651,#138643,#138653,.T.); +#138651 = VERTEX_POINT('',#138652); +#138652 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.2)); +#138653 = LINE('',#138654,#138655); +#138654 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.2)); +#138655 = VECTOR('',#138656,1.); +#138656 = DIRECTION('',(0.546623277701,-0.837378643312,0.)); +#138657 = ORIENTED_EDGE('',*,*,#138658,.F.); +#138658 = EDGE_CURVE('',#138659,#138651,#138661,.T.); +#138659 = VERTEX_POINT('',#138660); +#138660 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.2)); +#138661 = LINE('',#138662,#138663); +#138662 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.2)); +#138663 = VECTOR('',#138664,1.); +#138664 = DIRECTION('',(0.237770496721,-0.971321363344,0.)); +#138665 = ORIENTED_EDGE('',*,*,#138666,.F.); +#138666 = EDGE_CURVE('',#138667,#138659,#138669,.T.); +#138667 = VERTEX_POINT('',#138668); +#138668 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.2)); +#138669 = LINE('',#138670,#138671); +#138670 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.2)); +#138671 = VECTOR('',#138672,1.); +#138672 = DIRECTION('',(0.,-1.,0.)); +#138673 = ORIENTED_EDGE('',*,*,#138674,.F.); +#138674 = EDGE_CURVE('',#138675,#138667,#138677,.T.); +#138675 = VERTEX_POINT('',#138676); +#138676 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.2)); +#138677 = LINE('',#138678,#138679); +#138678 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.2)); +#138679 = VECTOR('',#138680,1.); +#138680 = DIRECTION('',(-0.237770496721,-0.971321363344,0.)); +#138681 = ORIENTED_EDGE('',*,*,#138682,.F.); +#138682 = EDGE_CURVE('',#138683,#138675,#138685,.T.); +#138683 = VERTEX_POINT('',#138684); +#138684 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.2)); +#138685 = LINE('',#138686,#138687); +#138686 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.2)); +#138687 = VECTOR('',#138688,1.); +#138688 = DIRECTION('',(-0.546622919779,-0.837378876956,0.)); +#138689 = ORIENTED_EDGE('',*,*,#138690,.F.); +#138690 = EDGE_CURVE('',#138691,#138683,#138693,.T.); +#138691 = VERTEX_POINT('',#138692); +#138692 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.2)); +#138693 = LINE('',#138694,#138695); +#138694 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.2)); +#138695 = VECTOR('',#138696,1.); +#138696 = DIRECTION('',(-0.8265992788,-0.562790931242,0.)); +#138697 = ORIENTED_EDGE('',*,*,#138698,.F.); +#138698 = EDGE_CURVE('',#138699,#138691,#138701,.T.); +#138699 = VERTEX_POINT('',#138700); +#138700 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.2)); +#138701 = LINE('',#138702,#138703); +#138702 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.2)); +#138703 = VECTOR('',#138704,1.); +#138704 = DIRECTION('',(-0.968917661144,-0.247383439065,0.)); +#138705 = ORIENTED_EDGE('',*,*,#138706,.F.); +#138706 = EDGE_CURVE('',#138619,#138699,#138707,.T.); +#138707 = LINE('',#138708,#138709); +#138708 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.2)); +#138709 = VECTOR('',#138710,1.); +#138710 = DIRECTION('',(-1.,0.,0.)); +#138711 = PLANE('',#138712); +#138712 = AXIS2_PLACEMENT_3D('',#138713,#138714,#138715); +#138713 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138714 = DIRECTION('',(0.,0.,-1.)); +#138715 = DIRECTION('',(0.,-1.,0.)); +#138716 = ADVANCED_FACE('',(#138717),#138743,.T.); +#138717 = FACE_BOUND('',#138718,.T.); +#138718 = EDGE_LOOP('',(#138719,#138729,#138737)); +#138719 = ORIENTED_EDGE('',*,*,#138720,.F.); +#138720 = EDGE_CURVE('',#138721,#138723,#138725,.T.); +#138721 = VERTEX_POINT('',#138722); +#138722 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.2)); +#138723 = VERTEX_POINT('',#138724); +#138724 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.2)); +#138725 = LINE('',#138726,#138727); +#138726 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.2)); +#138727 = VECTOR('',#138728,1.); +#138728 = DIRECTION('',(-0.310280021328,0.950645206355,0.)); +#138729 = ORIENTED_EDGE('',*,*,#138730,.F.); +#138730 = EDGE_CURVE('',#138731,#138721,#138733,.T.); +#138731 = VERTEX_POINT('',#138732); +#138732 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.2)); +#138733 = LINE('',#138734,#138735); +#138734 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.2)); +#138735 = VECTOR('',#138736,1.); +#138736 = DIRECTION('',(1.,0.,0.)); +#138737 = ORIENTED_EDGE('',*,*,#138738,.F.); +#138738 = EDGE_CURVE('',#138723,#138731,#138739,.T.); +#138739 = LINE('',#138740,#138741); +#138740 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.2)); +#138741 = VECTOR('',#138742,1.); +#138742 = DIRECTION('',(-0.310280021328,-0.950645206355,0.)); +#138743 = PLANE('',#138744); +#138744 = AXIS2_PLACEMENT_3D('',#138745,#138746,#138747); +#138745 = CARTESIAN_POINT('',(6.075,0.,-11.2)); +#138746 = DIRECTION('',(0.,0.,-1.)); +#138747 = DIRECTION('',(0.,-1.,0.)); +#138748 = ADVANCED_FACE('',(#138749),#138775,.F.); +#138749 = FACE_BOUND('',#138750,.F.); +#138750 = EDGE_LOOP('',(#138751,#138752,#138760,#138769)); +#138751 = ORIENTED_EDGE('',*,*,#137345,.T.); +#138752 = ORIENTED_EDGE('',*,*,#138753,.T.); +#138753 = EDGE_CURVE('',#137335,#138754,#138756,.T.); +#138754 = VERTEX_POINT('',#138755); +#138755 = CARTESIAN_POINT('',(-2.75,0.,-11.4)); +#138756 = LINE('',#138757,#138758); +#138757 = CARTESIAN_POINT('',(-2.75,0.,-11.2)); +#138758 = VECTOR('',#138759,1.); +#138759 = DIRECTION('',(0.,0.,-1.)); +#138760 = ORIENTED_EDGE('',*,*,#138761,.T.); +#138761 = EDGE_CURVE('',#138754,#138762,#138764,.T.); +#138762 = VERTEX_POINT('',#138763); +#138763 = CARTESIAN_POINT('',(2.75,0.,-11.4)); +#138764 = CIRCLE('',#138765,2.75); +#138765 = AXIS2_PLACEMENT_3D('',#138766,#138767,#138768); +#138766 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138767 = DIRECTION('',(0.,0.,1.)); +#138768 = DIRECTION('',(-1.,0.,0.)); +#138769 = ORIENTED_EDGE('',*,*,#138770,.F.); +#138770 = EDGE_CURVE('',#137337,#138762,#138771,.T.); +#138771 = LINE('',#138772,#138773); +#138772 = CARTESIAN_POINT('',(2.75,0.,-11.2)); +#138773 = VECTOR('',#138774,1.); +#138774 = DIRECTION('',(0.,0.,-1.)); +#138775 = CYLINDRICAL_SURFACE('',#138776,2.75); +#138776 = AXIS2_PLACEMENT_3D('',#138777,#138778,#138779); +#138777 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#138778 = DIRECTION('',(0.,0.,-1.)); +#138779 = DIRECTION('',(-1.,0.,0.)); +#138780 = ADVANCED_FACE('',(#138781),#138793,.F.); +#138781 = FACE_BOUND('',#138782,.F.); +#138782 = EDGE_LOOP('',(#138783,#138784,#138785,#138792)); +#138783 = ORIENTED_EDGE('',*,*,#137334,.T.); +#138784 = ORIENTED_EDGE('',*,*,#138770,.T.); +#138785 = ORIENTED_EDGE('',*,*,#138786,.T.); +#138786 = EDGE_CURVE('',#138762,#138754,#138787,.T.); +#138787 = CIRCLE('',#138788,2.75); +#138788 = AXIS2_PLACEMENT_3D('',#138789,#138790,#138791); +#138789 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138790 = DIRECTION('',(0.,0.,1.)); +#138791 = DIRECTION('',(1.,0.,-0.)); +#138792 = ORIENTED_EDGE('',*,*,#138753,.F.); +#138793 = CYLINDRICAL_SURFACE('',#138794,2.75); +#138794 = AXIS2_PLACEMENT_3D('',#138795,#138796,#138797); +#138795 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#138796 = DIRECTION('',(0.,0.,-1.)); +#138797 = DIRECTION('',(-1.,0.,0.)); +#138798 = ADVANCED_FACE('',(#138799),#138819,.T.); +#138799 = FACE_BOUND('',#138800,.T.); +#138800 = EDGE_LOOP('',(#138801,#138812)); +#138801 = ORIENTED_EDGE('',*,*,#138802,.T.); +#138802 = EDGE_CURVE('',#138803,#138805,#138807,.T.); +#138803 = VERTEX_POINT('',#138804); +#138804 = CARTESIAN_POINT('',(1.25,0.,-11.4)); +#138805 = VERTEX_POINT('',#138806); +#138806 = CARTESIAN_POINT('',(-1.25,0.,-11.4)); +#138807 = CIRCLE('',#138808,1.25); +#138808 = AXIS2_PLACEMENT_3D('',#138809,#138810,#138811); +#138809 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138810 = DIRECTION('',(0.,0.,-1.)); +#138811 = DIRECTION('',(1.,0.,0.)); +#138812 = ORIENTED_EDGE('',*,*,#138813,.T.); +#138813 = EDGE_CURVE('',#138805,#138803,#138814,.T.); +#138814 = CIRCLE('',#138815,1.25); +#138815 = AXIS2_PLACEMENT_3D('',#138816,#138817,#138818); +#138816 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138817 = DIRECTION('',(0.,0.,-1.)); +#138818 = DIRECTION('',(-1.,0.,0.)); +#138819 = PLANE('',#138820); +#138820 = AXIS2_PLACEMENT_3D('',#138821,#138822,#138823); +#138821 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138822 = DIRECTION('',(0.,0.,-1.)); +#138823 = DIRECTION('',(0.,-1.,0.)); +#138824 = ADVANCED_FACE('',(#138825,#138845),#138865,.T.); +#138825 = FACE_BOUND('',#138826,.T.); +#138826 = EDGE_LOOP('',(#138827,#138838)); +#138827 = ORIENTED_EDGE('',*,*,#138828,.T.); +#138828 = EDGE_CURVE('',#138829,#138831,#138833,.T.); +#138829 = VERTEX_POINT('',#138830); +#138830 = CARTESIAN_POINT('',(1.1474,-8.53712226592,-11.4)); +#138831 = VERTEX_POINT('',#138832); +#138832 = CARTESIAN_POINT('',(-1.1474,-8.53712226592,-11.4)); +#138833 = CIRCLE('',#138834,1.1474); +#138834 = AXIS2_PLACEMENT_3D('',#138835,#138836,#138837); +#138835 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.4)); +#138836 = DIRECTION('',(0.,0.,-1.)); +#138837 = DIRECTION('',(1.,0.,0.)); +#138838 = ORIENTED_EDGE('',*,*,#138839,.T.); +#138839 = EDGE_CURVE('',#138831,#138829,#138840,.T.); +#138840 = CIRCLE('',#138841,1.1474); +#138841 = AXIS2_PLACEMENT_3D('',#138842,#138843,#138844); +#138842 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.4)); +#138843 = DIRECTION('',(0.,0.,-1.)); +#138844 = DIRECTION('',(-1.,0.,0.)); +#138845 = FACE_BOUND('',#138846,.T.); +#138846 = EDGE_LOOP('',(#138847,#138858)); +#138847 = ORIENTED_EDGE('',*,*,#138848,.T.); +#138848 = EDGE_CURVE('',#138849,#138851,#138853,.T.); +#138849 = VERTEX_POINT('',#138850); +#138850 = CARTESIAN_POINT('',(0.8134,-8.53712226592,-11.4)); +#138851 = VERTEX_POINT('',#138852); +#138852 = CARTESIAN_POINT('',(-0.8134,-8.53712226592,-11.4)); +#138853 = CIRCLE('',#138854,0.8134); +#138854 = AXIS2_PLACEMENT_3D('',#138855,#138856,#138857); +#138855 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.4)); +#138856 = DIRECTION('',(0.,0.,1.)); +#138857 = DIRECTION('',(1.,0.,-0.)); +#138858 = ORIENTED_EDGE('',*,*,#138859,.T.); +#138859 = EDGE_CURVE('',#138851,#138849,#138860,.T.); +#138860 = CIRCLE('',#138861,0.8134); +#138861 = AXIS2_PLACEMENT_3D('',#138862,#138863,#138864); +#138862 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.4)); +#138863 = DIRECTION('',(0.,0.,1.)); +#138864 = DIRECTION('',(-1.,0.,0.)); +#138865 = PLANE('',#138866); +#138866 = AXIS2_PLACEMENT_3D('',#138867,#138868,#138869); +#138867 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138868 = DIRECTION('',(0.,0.,-1.)); +#138869 = DIRECTION('',(0.,-1.,0.)); +#138870 = ADVANCED_FACE('',(#138871,#139004),#139008,.T.); +#138871 = FACE_BOUND('',#138872,.T.); +#138872 = EDGE_LOOP('',(#138873,#138883,#138891,#138900,#138908,#138916, + #138924,#138933,#138941,#138949,#138957,#138966,#138974,#138982, + #138990,#138998)); +#138873 = ORIENTED_EDGE('',*,*,#138874,.T.); +#138874 = EDGE_CURVE('',#138875,#138877,#138879,.T.); +#138875 = VERTEX_POINT('',#138876); +#138876 = CARTESIAN_POINT('',(1.875705473106,6.,-11.4)); +#138877 = VERTEX_POINT('',#138878); +#138878 = CARTESIAN_POINT('',(0.500005473106,6.,-11.4)); +#138879 = LINE('',#138880,#138881); +#138880 = CARTESIAN_POINT('',(1.875705473106,6.,-11.4)); +#138881 = VECTOR('',#138882,1.); +#138882 = DIRECTION('',(-1.,0.,0.)); +#138883 = ORIENTED_EDGE('',*,*,#138884,.T.); +#138884 = EDGE_CURVE('',#138877,#138885,#138887,.T.); +#138885 = VERTEX_POINT('',#138886); +#138886 = CARTESIAN_POINT('',(0.500005473106,4.5378363365,-11.4)); +#138887 = LINE('',#138888,#138889); +#138888 = CARTESIAN_POINT('',(0.500005473106,6.,-11.4)); +#138889 = VECTOR('',#138890,1.); +#138890 = DIRECTION('',(0.,-1.,0.)); +#138891 = ORIENTED_EDGE('',*,*,#138892,.T.); +#138892 = EDGE_CURVE('',#138885,#138893,#138895,.T.); +#138893 = VERTEX_POINT('',#138894); +#138894 = CARTESIAN_POINT('',(4.406227607803,1.19462226592,-11.4)); +#138895 = CIRCLE('',#138896,4.5653); +#138896 = AXIS2_PLACEMENT_3D('',#138897,#138898,#138899); +#138897 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138898 = DIRECTION('',(0.,0.,-1.)); +#138899 = DIRECTION('',(0.109523026549,0.993984258756,0.)); +#138900 = ORIENTED_EDGE('',*,*,#138901,.T.); +#138901 = EDGE_CURVE('',#138893,#138902,#138904,.T.); +#138902 = VERTEX_POINT('',#138903); +#138903 = CARTESIAN_POINT('',(4.1,1.19462226592,-11.4)); +#138904 = LINE('',#138905,#138906); +#138905 = CARTESIAN_POINT('',(4.406227607803,1.19462226592,-11.4)); +#138906 = VECTOR('',#138907,1.); +#138907 = DIRECTION('',(-1.,0.,0.)); +#138908 = ORIENTED_EDGE('',*,*,#138909,.T.); +#138909 = EDGE_CURVE('',#138902,#138910,#138912,.T.); +#138910 = VERTEX_POINT('',#138911); +#138911 = CARTESIAN_POINT('',(4.1,-1.19462226592,-11.4)); +#138912 = LINE('',#138913,#138914); +#138913 = CARTESIAN_POINT('',(4.1,1.19462226592,-11.4)); +#138914 = VECTOR('',#138915,1.); +#138915 = DIRECTION('',(0.,-1.,0.)); +#138916 = ORIENTED_EDGE('',*,*,#138917,.T.); +#138917 = EDGE_CURVE('',#138910,#138918,#138920,.T.); +#138918 = VERTEX_POINT('',#138919); +#138919 = CARTESIAN_POINT('',(4.406227607803,-1.19462226592,-11.4)); +#138920 = LINE('',#138921,#138922); +#138921 = CARTESIAN_POINT('',(4.1,-1.19462226592,-11.4)); +#138922 = VECTOR('',#138923,1.); +#138923 = DIRECTION('',(1.,0.,0.)); +#138924 = ORIENTED_EDGE('',*,*,#138925,.T.); +#138925 = EDGE_CURVE('',#138918,#138926,#138928,.T.); +#138926 = VERTEX_POINT('',#138927); +#138927 = CARTESIAN_POINT('',(-4.406227607803,-1.19462226592,-11.4)); +#138928 = CIRCLE('',#138929,4.5653); +#138929 = AXIS2_PLACEMENT_3D('',#138930,#138931,#138932); +#138930 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138931 = DIRECTION('',(0.,0.,-1.)); +#138932 = DIRECTION('',(0.96515620174,-0.26167442795,0.)); +#138933 = ORIENTED_EDGE('',*,*,#138934,.T.); +#138934 = EDGE_CURVE('',#138926,#138935,#138937,.T.); +#138935 = VERTEX_POINT('',#138936); +#138936 = CARTESIAN_POINT('',(-4.1,-1.19462226592,-11.4)); +#138937 = LINE('',#138938,#138939); +#138938 = CARTESIAN_POINT('',(-4.406227607803,-1.19462226592,-11.4)); +#138939 = VECTOR('',#138940,1.); +#138940 = DIRECTION('',(1.,0.,0.)); +#138941 = ORIENTED_EDGE('',*,*,#138942,.T.); +#138942 = EDGE_CURVE('',#138935,#138943,#138945,.T.); +#138943 = VERTEX_POINT('',#138944); +#138944 = CARTESIAN_POINT('',(-4.1,1.19462226592,-11.4)); +#138945 = LINE('',#138946,#138947); +#138946 = CARTESIAN_POINT('',(-4.1,-1.19462226592,-11.4)); +#138947 = VECTOR('',#138948,1.); +#138948 = DIRECTION('',(0.,1.,0.)); +#138949 = ORIENTED_EDGE('',*,*,#138950,.T.); +#138950 = EDGE_CURVE('',#138943,#138951,#138953,.T.); +#138951 = VERTEX_POINT('',#138952); +#138952 = CARTESIAN_POINT('',(-4.406227607803,1.19462226592,-11.4)); +#138953 = LINE('',#138954,#138955); +#138954 = CARTESIAN_POINT('',(-4.1,1.19462226592,-11.4)); +#138955 = VECTOR('',#138956,1.); +#138956 = DIRECTION('',(-1.,0.,0.)); +#138957 = ORIENTED_EDGE('',*,*,#138958,.T.); +#138958 = EDGE_CURVE('',#138951,#138959,#138961,.T.); +#138959 = VERTEX_POINT('',#138960); +#138960 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.4)); +#138961 = CIRCLE('',#138962,4.5653); +#138962 = AXIS2_PLACEMENT_3D('',#138963,#138964,#138965); +#138963 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#138964 = DIRECTION('',(0.,0.,-1.)); +#138965 = DIRECTION('',(-0.96515620174,0.26167442795,0.)); +#138966 = ORIENTED_EDGE('',*,*,#138967,.T.); +#138967 = EDGE_CURVE('',#138959,#138968,#138970,.T.); +#138968 = VERTEX_POINT('',#138969); +#138969 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.4)); +#138970 = LINE('',#138971,#138972); +#138971 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.4)); +#138972 = VECTOR('',#138973,1.); +#138973 = DIRECTION('',(0.,1.,0.)); +#138974 = ORIENTED_EDGE('',*,*,#138975,.T.); +#138975 = EDGE_CURVE('',#138968,#138976,#138978,.T.); +#138976 = VERTEX_POINT('',#138977); +#138977 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.4)); +#138978 = LINE('',#138979,#138980); +#138979 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.4)); +#138980 = VECTOR('',#138981,1.); +#138981 = DIRECTION('',(-1.,0.,0.)); +#138982 = ORIENTED_EDGE('',*,*,#138983,.T.); +#138983 = EDGE_CURVE('',#138976,#138984,#138986,.T.); +#138984 = VERTEX_POINT('',#138985); +#138985 = CARTESIAN_POINT('',(-1.875705473106,6.575,-11.4)); +#138986 = LINE('',#138987,#138988); +#138987 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.4)); +#138988 = VECTOR('',#138989,1.); +#138989 = DIRECTION('',(0.,1.,0.)); +#138990 = ORIENTED_EDGE('',*,*,#138991,.T.); +#138991 = EDGE_CURVE('',#138984,#138992,#138994,.T.); +#138992 = VERTEX_POINT('',#138993); +#138993 = CARTESIAN_POINT('',(1.875705473106,6.575,-11.4)); +#138994 = LINE('',#138995,#138996); +#138995 = CARTESIAN_POINT('',(-1.875705473106,6.575,-11.4)); +#138996 = VECTOR('',#138997,1.); +#138997 = DIRECTION('',(1.,0.,0.)); +#138998 = ORIENTED_EDGE('',*,*,#138999,.T.); +#138999 = EDGE_CURVE('',#138992,#138875,#139000,.T.); +#139000 = LINE('',#139001,#139002); +#139001 = CARTESIAN_POINT('',(1.875705473106,6.575,-11.4)); +#139002 = VECTOR('',#139003,1.); +#139003 = DIRECTION('',(0.,-1.,0.)); +#139004 = FACE_BOUND('',#139005,.T.); +#139005 = EDGE_LOOP('',(#139006,#139007)); +#139006 = ORIENTED_EDGE('',*,*,#138786,.T.); +#139007 = ORIENTED_EDGE('',*,*,#138761,.T.); +#139008 = PLANE('',#139009); +#139009 = AXIS2_PLACEMENT_3D('',#139010,#139011,#139012); +#139010 = CARTESIAN_POINT('',(0.,0.,-11.4)); +#139011 = DIRECTION('',(0.,0.,-1.)); +#139012 = DIRECTION('',(0.,-1.,0.)); +#139013 = ADVANCED_FACE('',(#139014),#139030,.T.); +#139014 = FACE_BOUND('',#139015,.T.); +#139015 = EDGE_LOOP('',(#139016,#139022,#139023,#139029)); +#139016 = ORIENTED_EDGE('',*,*,#139017,.T.); +#139017 = EDGE_CURVE('',#137355,#138803,#139018,.T.); +#139018 = LINE('',#139019,#139020); +#139019 = CARTESIAN_POINT('',(1.25,0.,-11.2)); +#139020 = VECTOR('',#139021,1.); +#139021 = DIRECTION('',(0.,0.,-1.)); +#139022 = ORIENTED_EDGE('',*,*,#138813,.F.); +#139023 = ORIENTED_EDGE('',*,*,#139024,.F.); +#139024 = EDGE_CURVE('',#137357,#138805,#139025,.T.); +#139025 = LINE('',#139026,#139027); +#139026 = CARTESIAN_POINT('',(-1.25,0.,-11.2)); +#139027 = VECTOR('',#139028,1.); +#139028 = DIRECTION('',(0.,0.,-1.)); +#139029 = ORIENTED_EDGE('',*,*,#137365,.T.); +#139030 = CYLINDRICAL_SURFACE('',#139031,1.25); +#139031 = AXIS2_PLACEMENT_3D('',#139032,#139033,#139034); +#139032 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#139033 = DIRECTION('',(0.,0.,-1.)); +#139034 = DIRECTION('',(-1.,0.,0.)); +#139035 = ADVANCED_FACE('',(#139036),#139042,.T.); +#139036 = FACE_BOUND('',#139037,.T.); +#139037 = EDGE_LOOP('',(#139038,#139039,#139040,#139041)); +#139038 = ORIENTED_EDGE('',*,*,#139024,.T.); +#139039 = ORIENTED_EDGE('',*,*,#138802,.F.); +#139040 = ORIENTED_EDGE('',*,*,#139017,.F.); +#139041 = ORIENTED_EDGE('',*,*,#137354,.T.); +#139042 = CYLINDRICAL_SURFACE('',#139043,1.25); +#139043 = AXIS2_PLACEMENT_3D('',#139044,#139045,#139046); +#139044 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#139045 = DIRECTION('',(0.,0.,-1.)); +#139046 = DIRECTION('',(-1.,0.,0.)); +#139047 = ADVANCED_FACE('',(#139048),#139064,.F.); +#139048 = FACE_BOUND('',#139049,.F.); +#139049 = EDGE_LOOP('',(#139050,#139051,#139057,#139058)); +#139050 = ORIENTED_EDGE('',*,*,#138032,.T.); +#139051 = ORIENTED_EDGE('',*,*,#139052,.T.); +#139052 = EDGE_CURVE('',#138022,#138851,#139053,.T.); +#139053 = LINE('',#139054,#139055); +#139054 = CARTESIAN_POINT('',(-0.8134,-8.53712226592,-11.2)); +#139055 = VECTOR('',#139056,1.); +#139056 = DIRECTION('',(0.,0.,-1.)); +#139057 = ORIENTED_EDGE('',*,*,#138859,.T.); +#139058 = ORIENTED_EDGE('',*,*,#139059,.F.); +#139059 = EDGE_CURVE('',#138024,#138849,#139060,.T.); +#139060 = LINE('',#139061,#139062); +#139061 = CARTESIAN_POINT('',(0.8134,-8.53712226592,-11.2)); +#139062 = VECTOR('',#139063,1.); +#139063 = DIRECTION('',(0.,0.,-1.)); +#139064 = CYLINDRICAL_SURFACE('',#139065,0.8134); +#139065 = AXIS2_PLACEMENT_3D('',#139066,#139067,#139068); +#139066 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#139067 = DIRECTION('',(0.,0.,-1.)); +#139068 = DIRECTION('',(-1.,0.,0.)); +#139069 = ADVANCED_FACE('',(#139070),#139076,.F.); +#139070 = FACE_BOUND('',#139071,.F.); +#139071 = EDGE_LOOP('',(#139072,#139073,#139074,#139075)); +#139072 = ORIENTED_EDGE('',*,*,#138021,.T.); +#139073 = ORIENTED_EDGE('',*,*,#139059,.T.); +#139074 = ORIENTED_EDGE('',*,*,#138848,.T.); +#139075 = ORIENTED_EDGE('',*,*,#139052,.F.); +#139076 = CYLINDRICAL_SURFACE('',#139077,0.8134); +#139077 = AXIS2_PLACEMENT_3D('',#139078,#139079,#139080); +#139078 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#139079 = DIRECTION('',(0.,0.,-1.)); +#139080 = DIRECTION('',(-1.,0.,0.)); +#139081 = ADVANCED_FACE('',(#139082),#139098,.T.); +#139082 = FACE_BOUND('',#139083,.T.); +#139083 = EDGE_LOOP('',(#139084,#139090,#139091,#139097)); +#139084 = ORIENTED_EDGE('',*,*,#139085,.T.); +#139085 = EDGE_CURVE('',#138455,#138829,#139086,.T.); +#139086 = LINE('',#139087,#139088); +#139087 = CARTESIAN_POINT('',(1.1474,-8.53712226592,-11.2)); +#139088 = VECTOR('',#139089,1.); +#139089 = DIRECTION('',(0.,0.,-1.)); +#139090 = ORIENTED_EDGE('',*,*,#138839,.F.); +#139091 = ORIENTED_EDGE('',*,*,#139092,.F.); +#139092 = EDGE_CURVE('',#138457,#138831,#139093,.T.); +#139093 = LINE('',#139094,#139095); +#139094 = CARTESIAN_POINT('',(-1.1474,-8.53712226592,-11.2)); +#139095 = VECTOR('',#139096,1.); +#139096 = DIRECTION('',(0.,0.,-1.)); +#139097 = ORIENTED_EDGE('',*,*,#138465,.T.); +#139098 = CYLINDRICAL_SURFACE('',#139099,1.1474); +#139099 = AXIS2_PLACEMENT_3D('',#139100,#139101,#139102); +#139100 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#139101 = DIRECTION('',(0.,0.,-1.)); +#139102 = DIRECTION('',(-1.,0.,0.)); +#139103 = ADVANCED_FACE('',(#139104),#139110,.T.); +#139104 = FACE_BOUND('',#139105,.T.); +#139105 = EDGE_LOOP('',(#139106,#139107,#139108,#139109)); +#139106 = ORIENTED_EDGE('',*,*,#139092,.T.); +#139107 = ORIENTED_EDGE('',*,*,#138828,.F.); +#139108 = ORIENTED_EDGE('',*,*,#139085,.F.); +#139109 = ORIENTED_EDGE('',*,*,#138454,.T.); +#139110 = CYLINDRICAL_SURFACE('',#139111,1.1474); +#139111 = AXIS2_PLACEMENT_3D('',#139112,#139113,#139114); +#139112 = CARTESIAN_POINT('',(0.,-8.53712226592,-11.2)); +#139113 = DIRECTION('',(0.,0.,-1.)); +#139114 = DIRECTION('',(-1.,0.,0.)); +#139115 = ADVANCED_FACE('',(#139116),#139147,.T.); +#139116 = FACE_BOUND('',#139117,.T.); +#139117 = EDGE_LOOP('',(#139118,#139126,#139132,#139133,#139141)); +#139118 = ORIENTED_EDGE('',*,*,#139119,.T.); +#139119 = EDGE_CURVE('',#139120,#138048,#139122,.T.); +#139120 = VERTEX_POINT('',#139121); +#139121 = CARTESIAN_POINT('',(1.875705473106,6.,-7.9)); +#139122 = LINE('',#139123,#139124); +#139123 = CARTESIAN_POINT('',(1.875705473106,6.,-7.9)); +#139124 = VECTOR('',#139125,1.); +#139125 = DIRECTION('',(0.,0.,-1.)); +#139126 = ORIENTED_EDGE('',*,*,#139127,.T.); +#139127 = EDGE_CURVE('',#138048,#138875,#139128,.T.); +#139128 = LINE('',#139129,#139130); +#139129 = CARTESIAN_POINT('',(1.875705473106,6.,-11.2)); +#139130 = VECTOR('',#139131,1.); +#139131 = DIRECTION('',(0.,0.,-1.)); +#139132 = ORIENTED_EDGE('',*,*,#138999,.F.); +#139133 = ORIENTED_EDGE('',*,*,#139134,.T.); +#139134 = EDGE_CURVE('',#138992,#139135,#139137,.T.); +#139135 = VERTEX_POINT('',#139136); +#139136 = CARTESIAN_POINT('',(1.875705473106,6.575,-7.9)); +#139137 = LINE('',#139138,#139139); +#139138 = CARTESIAN_POINT('',(1.875705473106,6.575,-11.4)); +#139139 = VECTOR('',#139140,1.); +#139140 = DIRECTION('',(0.,0.,1.)); +#139141 = ORIENTED_EDGE('',*,*,#139142,.T.); +#139142 = EDGE_CURVE('',#139135,#139120,#139143,.T.); +#139143 = LINE('',#139144,#139145); +#139144 = CARTESIAN_POINT('',(1.875705473106,6.575,-7.9)); +#139145 = VECTOR('',#139146,1.); +#139146 = DIRECTION('',(0.,-1.,0.)); +#139147 = PLANE('',#139148); +#139148 = AXIS2_PLACEMENT_3D('',#139149,#139150,#139151); +#139149 = CARTESIAN_POINT('',(1.875705473106,6.575,-11.2)); +#139150 = DIRECTION('',(1.,0.,0.)); +#139151 = DIRECTION('',(-0.,1.,0.)); +#139152 = ADVANCED_FACE('',(#139153),#139178,.F.); +#139153 = FACE_BOUND('',#139154,.T.); +#139154 = EDGE_LOOP('',(#139155,#139156,#139164,#139172)); +#139155 = ORIENTED_EDGE('',*,*,#139142,.F.); +#139156 = ORIENTED_EDGE('',*,*,#139157,.F.); +#139157 = EDGE_CURVE('',#139158,#139135,#139160,.T.); +#139158 = VERTEX_POINT('',#139159); +#139159 = CARTESIAN_POINT('',(-1.875705473106,6.575,-7.9)); +#139160 = LINE('',#139161,#139162); +#139161 = CARTESIAN_POINT('',(-1.875705473106,6.575,-7.9)); +#139162 = VECTOR('',#139163,1.); +#139163 = DIRECTION('',(1.,0.,0.)); +#139164 = ORIENTED_EDGE('',*,*,#139165,.F.); +#139165 = EDGE_CURVE('',#139166,#139158,#139168,.T.); +#139166 = VERTEX_POINT('',#139167); +#139167 = CARTESIAN_POINT('',(-1.875705473106,6.,-7.9)); +#139168 = LINE('',#139169,#139170); +#139169 = CARTESIAN_POINT('',(-1.875705473106,6.,-7.9)); +#139170 = VECTOR('',#139171,1.); +#139171 = DIRECTION('',(0.,1.,0.)); +#139172 = ORIENTED_EDGE('',*,*,#139173,.F.); +#139173 = EDGE_CURVE('',#139120,#139166,#139174,.T.); +#139174 = LINE('',#139175,#139176); +#139175 = CARTESIAN_POINT('',(1.875705473106,6.,-7.9)); +#139176 = VECTOR('',#139177,1.); +#139177 = DIRECTION('',(-1.,0.,0.)); +#139178 = PLANE('',#139179); +#139179 = AXIS2_PLACEMENT_3D('',#139180,#139181,#139182); +#139180 = CARTESIAN_POINT('',(0.,0.,-7.9)); +#139181 = DIRECTION('',(0.,0.,-1.)); +#139182 = DIRECTION('',(0.,-1.,0.)); +#139183 = ADVANCED_FACE('',(#139184),#139282,.T.); +#139184 = FACE_BOUND('',#139185,.T.); +#139185 = EDGE_LOOP('',(#139186,#139187,#139195,#139203,#139211,#139219, + #139227,#139235,#139243,#139251,#139259,#139267,#139273,#139274, + #139275,#139276)); +#139186 = ORIENTED_EDGE('',*,*,#138194,.F.); +#139187 = ORIENTED_EDGE('',*,*,#139188,.T.); +#139188 = EDGE_CURVE('',#138187,#139189,#139191,.T.); +#139189 = VERTEX_POINT('',#139190); +#139190 = CARTESIAN_POINT('',(-3.43613632781,6.,-9.8)); +#139191 = LINE('',#139192,#139193); +#139192 = CARTESIAN_POINT('',(-3.43613632781,6.,-11.2)); +#139193 = VECTOR('',#139194,1.); +#139194 = DIRECTION('',(0.,0.,1.)); +#139195 = ORIENTED_EDGE('',*,*,#139196,.T.); +#139196 = EDGE_CURVE('',#139189,#139197,#139199,.T.); +#139197 = VERTEX_POINT('',#139198); +#139198 = CARTESIAN_POINT('',(-4.4662,6.,-9.8)); +#139199 = LINE('',#139200,#139201); +#139200 = CARTESIAN_POINT('',(-3.43613632781,6.,-9.8)); +#139201 = VECTOR('',#139202,1.); +#139202 = DIRECTION('',(-1.,0.,0.)); +#139203 = ORIENTED_EDGE('',*,*,#139204,.F.); +#139204 = EDGE_CURVE('',#139205,#139197,#139207,.T.); +#139205 = VERTEX_POINT('',#139206); +#139206 = CARTESIAN_POINT('',(-4.4662,6.,-10.8)); +#139207 = LINE('',#139208,#139209); +#139208 = CARTESIAN_POINT('',(-4.4662,6.,-10.8)); +#139209 = VECTOR('',#139210,1.); +#139210 = DIRECTION('',(0.,0.,1.)); +#139211 = ORIENTED_EDGE('',*,*,#139212,.F.); +#139212 = EDGE_CURVE('',#139213,#139205,#139215,.T.); +#139213 = VERTEX_POINT('',#139214); +#139214 = CARTESIAN_POINT('',(-6.,6.,-10.8)); +#139215 = LINE('',#139216,#139217); +#139216 = CARTESIAN_POINT('',(-6.,6.,-10.8)); +#139217 = VECTOR('',#139218,1.); +#139218 = DIRECTION('',(1.,0.,0.)); +#139219 = ORIENTED_EDGE('',*,*,#139220,.T.); +#139220 = EDGE_CURVE('',#139213,#139221,#139223,.T.); +#139221 = VERTEX_POINT('',#139222); +#139222 = CARTESIAN_POINT('',(-6.,6.,-2.9)); +#139223 = LINE('',#139224,#139225); +#139224 = CARTESIAN_POINT('',(-6.,6.,-10.8)); +#139225 = VECTOR('',#139226,1.); +#139226 = DIRECTION('',(0.,0.,1.)); +#139227 = ORIENTED_EDGE('',*,*,#139228,.F.); +#139228 = EDGE_CURVE('',#139229,#139221,#139231,.T.); +#139229 = VERTEX_POINT('',#139230); +#139230 = CARTESIAN_POINT('',(6.,6.,-2.9)); +#139231 = LINE('',#139232,#139233); +#139232 = CARTESIAN_POINT('',(6.,6.,-2.9)); +#139233 = VECTOR('',#139234,1.); +#139234 = DIRECTION('',(-1.,0.,0.)); +#139235 = ORIENTED_EDGE('',*,*,#139236,.T.); +#139236 = EDGE_CURVE('',#139229,#139237,#139239,.T.); +#139237 = VERTEX_POINT('',#139238); +#139238 = CARTESIAN_POINT('',(6.,6.,-10.8)); +#139239 = LINE('',#139240,#139241); +#139240 = CARTESIAN_POINT('',(6.,6.,-2.9)); +#139241 = VECTOR('',#139242,1.); +#139242 = DIRECTION('',(0.,0.,-1.)); +#139243 = ORIENTED_EDGE('',*,*,#139244,.F.); +#139244 = EDGE_CURVE('',#139245,#139237,#139247,.T.); +#139245 = VERTEX_POINT('',#139246); +#139246 = CARTESIAN_POINT('',(4.4662,6.,-10.8)); +#139247 = LINE('',#139248,#139249); +#139248 = CARTESIAN_POINT('',(4.4662,6.,-10.8)); +#139249 = VECTOR('',#139250,1.); +#139250 = DIRECTION('',(1.,0.,0.)); +#139251 = ORIENTED_EDGE('',*,*,#139252,.T.); +#139252 = EDGE_CURVE('',#139245,#139253,#139255,.T.); +#139253 = VERTEX_POINT('',#139254); +#139254 = CARTESIAN_POINT('',(4.4662,6.,-9.8)); +#139255 = LINE('',#139256,#139257); +#139256 = CARTESIAN_POINT('',(4.4662,6.,-10.8)); +#139257 = VECTOR('',#139258,1.); +#139258 = DIRECTION('',(0.,0.,1.)); +#139259 = ORIENTED_EDGE('',*,*,#139260,.T.); +#139260 = EDGE_CURVE('',#139253,#139261,#139263,.T.); +#139261 = VERTEX_POINT('',#139262); +#139262 = CARTESIAN_POINT('',(3.43613632781,6.,-9.8)); +#139263 = LINE('',#139264,#139265); +#139264 = CARTESIAN_POINT('',(4.4662,6.,-9.8)); +#139265 = VECTOR('',#139266,1.); +#139266 = DIRECTION('',(-1.,0.,0.)); +#139267 = ORIENTED_EDGE('',*,*,#139268,.F.); +#139268 = EDGE_CURVE('',#138050,#139261,#139269,.T.); +#139269 = LINE('',#139270,#139271); +#139270 = CARTESIAN_POINT('',(3.43613632781,6.,-11.2)); +#139271 = VECTOR('',#139272,1.); +#139272 = DIRECTION('',(0.,0.,1.)); +#139273 = ORIENTED_EDGE('',*,*,#138047,.F.); +#139274 = ORIENTED_EDGE('',*,*,#139119,.F.); +#139275 = ORIENTED_EDGE('',*,*,#139173,.T.); +#139276 = ORIENTED_EDGE('',*,*,#139277,.F.); +#139277 = EDGE_CURVE('',#138195,#139166,#139278,.T.); +#139278 = LINE('',#139279,#139280); +#139279 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.2)); +#139280 = VECTOR('',#139281,1.); +#139281 = DIRECTION('',(0.,0.,1.)); +#139282 = PLANE('',#139283); +#139283 = AXIS2_PLACEMENT_3D('',#139284,#139285,#139286); +#139284 = CARTESIAN_POINT('',(-6.,6.,-11.2)); +#139285 = DIRECTION('',(-0.,1.,0.)); +#139286 = DIRECTION('',(1.,0.,0.)); +#139287 = ADVANCED_FACE('',(#139288),#139305,.T.); +#139288 = FACE_BOUND('',#139289,.T.); +#139289 = EDGE_LOOP('',(#139290,#139296,#139297,#139303,#139304)); +#139290 = ORIENTED_EDGE('',*,*,#139291,.T.); +#139291 = EDGE_CURVE('',#139158,#138984,#139292,.T.); +#139292 = LINE('',#139293,#139294); +#139293 = CARTESIAN_POINT('',(-1.875705473106,6.575,-7.9)); +#139294 = VECTOR('',#139295,1.); +#139295 = DIRECTION('',(0.,0.,-1.)); +#139296 = ORIENTED_EDGE('',*,*,#138983,.F.); +#139297 = ORIENTED_EDGE('',*,*,#139298,.F.); +#139298 = EDGE_CURVE('',#138195,#138976,#139299,.T.); +#139299 = LINE('',#139300,#139301); +#139300 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.2)); +#139301 = VECTOR('',#139302,1.); +#139302 = DIRECTION('',(0.,0.,-1.)); +#139303 = ORIENTED_EDGE('',*,*,#139277,.T.); +#139304 = ORIENTED_EDGE('',*,*,#139165,.T.); +#139305 = PLANE('',#139306); +#139306 = AXIS2_PLACEMENT_3D('',#139307,#139308,#139309); +#139307 = CARTESIAN_POINT('',(-1.875705473106,6.,-11.2)); +#139308 = DIRECTION('',(-1.,0.,0.)); +#139309 = DIRECTION('',(0.,0.,1.)); +#139310 = ADVANCED_FACE('',(#139311),#139322,.T.); +#139311 = FACE_BOUND('',#139312,.T.); +#139312 = EDGE_LOOP('',(#139313,#139314,#139315,#139321)); +#139313 = ORIENTED_EDGE('',*,*,#139298,.T.); +#139314 = ORIENTED_EDGE('',*,*,#138975,.F.); +#139315 = ORIENTED_EDGE('',*,*,#139316,.F.); +#139316 = EDGE_CURVE('',#138203,#138968,#139317,.T.); +#139317 = LINE('',#139318,#139319); +#139318 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.2)); +#139319 = VECTOR('',#139320,1.); +#139320 = DIRECTION('',(0.,0.,-1.)); +#139321 = ORIENTED_EDGE('',*,*,#138202,.T.); +#139322 = PLANE('',#139323); +#139323 = AXIS2_PLACEMENT_3D('',#139324,#139325,#139326); +#139324 = CARTESIAN_POINT('',(-0.500005473106,6.,-11.2)); +#139325 = DIRECTION('',(0.,-1.,0.)); +#139326 = DIRECTION('',(0.,0.,-1.)); +#139327 = ADVANCED_FACE('',(#139328),#139339,.T.); +#139328 = FACE_BOUND('',#139329,.T.); +#139329 = EDGE_LOOP('',(#139330,#139331,#139332,#139338)); +#139330 = ORIENTED_EDGE('',*,*,#139316,.T.); +#139331 = ORIENTED_EDGE('',*,*,#138967,.F.); +#139332 = ORIENTED_EDGE('',*,*,#139333,.F.); +#139333 = EDGE_CURVE('',#138211,#138959,#139334,.T.); +#139334 = LINE('',#139335,#139336); +#139335 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.2)); +#139336 = VECTOR('',#139337,1.); +#139337 = DIRECTION('',(0.,0.,-1.)); +#139338 = ORIENTED_EDGE('',*,*,#138210,.T.); +#139339 = PLANE('',#139340); +#139340 = AXIS2_PLACEMENT_3D('',#139341,#139342,#139343); +#139341 = CARTESIAN_POINT('',(-0.500005473106,4.5378363365,-11.2)); +#139342 = DIRECTION('',(-1.,0.,0.)); +#139343 = DIRECTION('',(0.,0.,1.)); +#139344 = ADVANCED_FACE('',(#139345),#139356,.T.); +#139345 = FACE_BOUND('',#139346,.T.); +#139346 = EDGE_LOOP('',(#139347,#139348,#139349,#139355)); +#139347 = ORIENTED_EDGE('',*,*,#139333,.T.); +#139348 = ORIENTED_EDGE('',*,*,#138958,.F.); +#139349 = ORIENTED_EDGE('',*,*,#139350,.F.); +#139350 = EDGE_CURVE('',#138219,#138951,#139351,.T.); +#139351 = LINE('',#139352,#139353); +#139352 = CARTESIAN_POINT('',(-4.406227607803,1.19462226592,-11.2)); +#139353 = VECTOR('',#139354,1.); +#139354 = DIRECTION('',(0.,0.,-1.)); +#139355 = ORIENTED_EDGE('',*,*,#138218,.T.); +#139356 = CYLINDRICAL_SURFACE('',#139357,4.5653); +#139357 = AXIS2_PLACEMENT_3D('',#139358,#139359,#139360); +#139358 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#139359 = DIRECTION('',(0.,0.,-1.)); +#139360 = DIRECTION('',(-1.,0.,0.)); +#139361 = ADVANCED_FACE('',(#139362),#139389,.T.); +#139362 = FACE_BOUND('',#139363,.T.); +#139363 = EDGE_LOOP('',(#139364,#139365,#139366,#139367,#139375,#139383) + ); +#139364 = ORIENTED_EDGE('',*,*,#138227,.F.); +#139365 = ORIENTED_EDGE('',*,*,#139350,.T.); +#139366 = ORIENTED_EDGE('',*,*,#138950,.F.); +#139367 = ORIENTED_EDGE('',*,*,#139368,.T.); +#139368 = EDGE_CURVE('',#138943,#139369,#139371,.T.); +#139369 = VERTEX_POINT('',#139370); +#139370 = CARTESIAN_POINT('',(-4.1,1.19462226592,-6.691944303917)); +#139371 = LINE('',#139372,#139373); +#139372 = CARTESIAN_POINT('',(-4.1,1.19462226592,-11.4)); +#139373 = VECTOR('',#139374,1.); +#139374 = DIRECTION('',(0.,0.,1.)); +#139375 = ORIENTED_EDGE('',*,*,#139376,.F.); +#139376 = EDGE_CURVE('',#139377,#139369,#139379,.T.); +#139377 = VERTEX_POINT('',#139378); +#139378 = CARTESIAN_POINT('',(-5.3,1.19462226592,-6.691944303917)); +#139379 = LINE('',#139380,#139381); +#139380 = CARTESIAN_POINT('',(-5.3,1.19462226592,-6.691944303917)); +#139381 = VECTOR('',#139382,1.); +#139382 = DIRECTION('',(1.,0.,0.)); +#139383 = ORIENTED_EDGE('',*,*,#139384,.T.); +#139384 = EDGE_CURVE('',#139377,#138228,#139385,.T.); +#139385 = LINE('',#139386,#139387); +#139386 = CARTESIAN_POINT('',(-5.3,1.19462226592,-6.691944303917)); +#139387 = VECTOR('',#139388,1.); +#139388 = DIRECTION('',(0.,0.,-1.)); +#139389 = PLANE('',#139390); +#139390 = AXIS2_PLACEMENT_3D('',#139391,#139392,#139393); +#139391 = CARTESIAN_POINT('',(-4.1,1.19462226592,-11.2)); +#139392 = DIRECTION('',(0.,-1.,0.)); +#139393 = DIRECTION('',(0.,0.,-1.)); +#139394 = ADVANCED_FACE('',(#139395),#139422,.T.); +#139395 = FACE_BOUND('',#139396,.T.); +#139396 = EDGE_LOOP('',(#139397,#139406,#139414,#139420,#139421)); +#139397 = ORIENTED_EDGE('',*,*,#139398,.T.); +#139398 = EDGE_CURVE('',#139377,#139399,#139401,.T.); +#139399 = VERTEX_POINT('',#139400); +#139400 = CARTESIAN_POINT('',(-5.3,1.863548826735,-6.086416329433)); +#139401 = CIRCLE('',#139402,2.322706281074); +#139402 = AXIS2_PLACEMENT_3D('',#139403,#139404,#139405); +#139403 = CARTESIAN_POINT('',(-5.3,0.,-4.7)); +#139404 = DIRECTION('',(1.,0.,0.)); +#139405 = DIRECTION('',(0.,0.514323431961,-0.857596296246)); +#139406 = ORIENTED_EDGE('',*,*,#139407,.T.); +#139407 = EDGE_CURVE('',#139399,#139408,#139410,.T.); +#139408 = VERTEX_POINT('',#139409); +#139409 = CARTESIAN_POINT('',(-5.3,2.4,-6.086416329433)); +#139410 = LINE('',#139411,#139412); +#139411 = CARTESIAN_POINT('',(-5.3,1.863548826735,-6.086416329433)); +#139412 = VECTOR('',#139413,1.); +#139413 = DIRECTION('',(0.,1.,0.)); +#139414 = ORIENTED_EDGE('',*,*,#139415,.F.); +#139415 = EDGE_CURVE('',#138236,#139408,#139416,.T.); +#139416 = LINE('',#139417,#139418); +#139417 = CARTESIAN_POINT('',(-5.3,2.4,-11.2)); +#139418 = VECTOR('',#139419,1.); +#139419 = DIRECTION('',(0.,0.,1.)); +#139420 = ORIENTED_EDGE('',*,*,#138235,.F.); +#139421 = ORIENTED_EDGE('',*,*,#139384,.F.); +#139422 = PLANE('',#139423); +#139423 = AXIS2_PLACEMENT_3D('',#139424,#139425,#139426); +#139424 = CARTESIAN_POINT('',(-5.3,-2.4,-11.2)); +#139425 = DIRECTION('',(-1.,0.,0.)); +#139426 = DIRECTION('',(0.,0.,1.)); +#139427 = ADVANCED_FACE('',(#139428),#139462,.T.); +#139428 = FACE_BOUND('',#139429,.T.); +#139429 = EDGE_LOOP('',(#139430,#139431,#139439,#139447,#139456)); +#139430 = ORIENTED_EDGE('',*,*,#138273,.F.); +#139431 = ORIENTED_EDGE('',*,*,#139432,.F.); +#139432 = EDGE_CURVE('',#139433,#138274,#139435,.T.); +#139433 = VERTEX_POINT('',#139434); +#139434 = CARTESIAN_POINT('',(-5.3,-2.4,-6.086416329433)); +#139435 = LINE('',#139436,#139437); +#139436 = CARTESIAN_POINT('',(-5.3,-2.4,-6.086416329433)); +#139437 = VECTOR('',#139438,1.); +#139438 = DIRECTION('',(0.,0.,-1.)); +#139439 = ORIENTED_EDGE('',*,*,#139440,.T.); +#139440 = EDGE_CURVE('',#139433,#139441,#139443,.T.); +#139441 = VERTEX_POINT('',#139442); +#139442 = CARTESIAN_POINT('',(-5.3,-1.863548826735,-6.086416329433)); +#139443 = LINE('',#139444,#139445); +#139444 = CARTESIAN_POINT('',(-5.3,-2.4,-6.086416329433)); +#139445 = VECTOR('',#139446,1.); +#139446 = DIRECTION('',(0.,1.,0.)); +#139447 = ORIENTED_EDGE('',*,*,#139448,.T.); +#139448 = EDGE_CURVE('',#139441,#139449,#139451,.T.); +#139449 = VERTEX_POINT('',#139450); +#139450 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-6.691944303917)); +#139451 = CIRCLE('',#139452,2.322706281074); +#139452 = AXIS2_PLACEMENT_3D('',#139453,#139454,#139455); +#139453 = CARTESIAN_POINT('',(-5.3,0.,-4.7)); +#139454 = DIRECTION('',(1.,0.,0.)); +#139455 = DIRECTION('',(0.,-0.802317900425,-0.596896964859)); +#139456 = ORIENTED_EDGE('',*,*,#139457,.F.); +#139457 = EDGE_CURVE('',#138276,#139449,#139458,.T.); +#139458 = LINE('',#139459,#139460); +#139459 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-11.2)); +#139460 = VECTOR('',#139461,1.); +#139461 = DIRECTION('',(0.,0.,1.)); +#139462 = PLANE('',#139463); +#139463 = AXIS2_PLACEMENT_3D('',#139464,#139465,#139466); +#139464 = CARTESIAN_POINT('',(-5.3,-2.4,-11.2)); +#139465 = DIRECTION('',(-1.,0.,0.)); +#139466 = DIRECTION('',(0.,0.,1.)); +#139467 = ADVANCED_FACE('',(#139468),#139486,.T.); +#139468 = FACE_BOUND('',#139469,.T.); +#139469 = EDGE_LOOP('',(#139470,#139478,#139479,#139480)); +#139470 = ORIENTED_EDGE('',*,*,#139471,.F.); +#139471 = EDGE_CURVE('',#138244,#139472,#139474,.T.); +#139472 = VERTEX_POINT('',#139473); +#139473 = CARTESIAN_POINT('',(-7.6,2.4,-6.086416329433)); +#139474 = LINE('',#139475,#139476); +#139475 = CARTESIAN_POINT('',(-7.6,2.4,-11.2)); +#139476 = VECTOR('',#139477,1.); +#139477 = DIRECTION('',(0.,0.,1.)); +#139478 = ORIENTED_EDGE('',*,*,#138243,.T.); +#139479 = ORIENTED_EDGE('',*,*,#139415,.T.); +#139480 = ORIENTED_EDGE('',*,*,#139481,.F.); +#139481 = EDGE_CURVE('',#139472,#139408,#139482,.T.); +#139482 = LINE('',#139483,#139484); +#139483 = CARTESIAN_POINT('',(-7.6,2.4,-6.086416329433)); +#139484 = VECTOR('',#139485,1.); +#139485 = DIRECTION('',(1.,0.,0.)); +#139486 = PLANE('',#139487); +#139487 = AXIS2_PLACEMENT_3D('',#139488,#139489,#139490); +#139488 = CARTESIAN_POINT('',(-5.3,2.4,-11.2)); +#139489 = DIRECTION('',(0.,-1.,0.)); +#139490 = DIRECTION('',(0.,0.,-1.)); +#139491 = ADVANCED_FACE('',(#139492),#139510,.T.); +#139492 = FACE_BOUND('',#139493,.T.); +#139493 = EDGE_LOOP('',(#139494,#139502,#139503,#139504)); +#139494 = ORIENTED_EDGE('',*,*,#139495,.F.); +#139495 = EDGE_CURVE('',#139472,#139496,#139498,.T.); +#139496 = VERTEX_POINT('',#139497); +#139497 = CARTESIAN_POINT('',(-7.6,1.863548826735,-6.086416329433)); +#139498 = LINE('',#139499,#139500); +#139499 = CARTESIAN_POINT('',(-7.6,2.4,-6.086416329433)); +#139500 = VECTOR('',#139501,1.); +#139501 = DIRECTION('',(0.,-1.,0.)); +#139502 = ORIENTED_EDGE('',*,*,#139481,.T.); +#139503 = ORIENTED_EDGE('',*,*,#139407,.F.); +#139504 = ORIENTED_EDGE('',*,*,#139505,.F.); +#139505 = EDGE_CURVE('',#139496,#139399,#139506,.T.); +#139506 = LINE('',#139507,#139508); +#139507 = CARTESIAN_POINT('',(-7.6,1.863548826735,-6.086416329433)); +#139508 = VECTOR('',#139509,1.); +#139509 = DIRECTION('',(1.,0.,0.)); +#139510 = PLANE('',#139511); +#139511 = AXIS2_PLACEMENT_3D('',#139512,#139513,#139514); +#139512 = CARTESIAN_POINT('',(-6.,2.4,-6.086416329433)); +#139513 = DIRECTION('',(0.,0.,-1.)); +#139514 = DIRECTION('',(0.,-1.,0.)); +#139515 = ADVANCED_FACE('',(#139516),#139552,.T.); +#139516 = FACE_BOUND('',#139517,.T.); +#139517 = EDGE_LOOP('',(#139518,#139527,#139528,#139529,#139530,#139539, + #139545,#139546)); +#139518 = ORIENTED_EDGE('',*,*,#139519,.F.); +#139519 = EDGE_CURVE('',#139496,#139520,#139522,.T.); +#139520 = VERTEX_POINT('',#139521); +#139521 = CARTESIAN_POINT('',(-7.6,-1.863548826735,-6.086416329433)); +#139522 = CIRCLE('',#139523,2.322706281074); +#139523 = AXIS2_PLACEMENT_3D('',#139524,#139525,#139526); +#139524 = CARTESIAN_POINT('',(-7.6,0.,-4.7)); +#139525 = DIRECTION('',(-1.,0.,0.)); +#139526 = DIRECTION('',(0.,0.802317900425,-0.596896964859)); +#139527 = ORIENTED_EDGE('',*,*,#139505,.T.); +#139528 = ORIENTED_EDGE('',*,*,#139398,.F.); +#139529 = ORIENTED_EDGE('',*,*,#139376,.T.); +#139530 = ORIENTED_EDGE('',*,*,#139531,.F.); +#139531 = EDGE_CURVE('',#139532,#139369,#139534,.T.); +#139532 = VERTEX_POINT('',#139533); +#139533 = CARTESIAN_POINT('',(-4.1,-1.19462226592,-6.691944303917)); +#139534 = CIRCLE('',#139535,2.322706281074); +#139535 = AXIS2_PLACEMENT_3D('',#139536,#139537,#139538); +#139536 = CARTESIAN_POINT('',(-4.1,0.,-4.7)); +#139537 = DIRECTION('',(1.,0.,0.)); +#139538 = DIRECTION('',(0.,-0.514323431961,-0.857596296246)); +#139539 = ORIENTED_EDGE('',*,*,#139540,.F.); +#139540 = EDGE_CURVE('',#139449,#139532,#139541,.T.); +#139541 = LINE('',#139542,#139543); +#139542 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-6.691944303917)); +#139543 = VECTOR('',#139544,1.); +#139544 = DIRECTION('',(1.,0.,0.)); +#139545 = ORIENTED_EDGE('',*,*,#139448,.F.); +#139546 = ORIENTED_EDGE('',*,*,#139547,.T.); +#139547 = EDGE_CURVE('',#139441,#139520,#139548,.T.); +#139548 = LINE('',#139549,#139550); +#139549 = CARTESIAN_POINT('',(-5.3,-1.863548826735,-6.086416329433)); +#139550 = VECTOR('',#139551,1.); +#139551 = DIRECTION('',(-1.,0.,0.)); +#139552 = CYLINDRICAL_SURFACE('',#139553,2.322706281074); +#139553 = AXIS2_PLACEMENT_3D('',#139554,#139555,#139556); +#139554 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#139555 = DIRECTION('',(-1.,0.,0.)); +#139556 = DIRECTION('',(0.,-1.,0.)); +#139557 = ADVANCED_FACE('',(#139558),#139576,.T.); +#139558 = FACE_BOUND('',#139559,.T.); +#139559 = EDGE_LOOP('',(#139560,#139568,#139569,#139570)); +#139560 = ORIENTED_EDGE('',*,*,#139561,.F.); +#139561 = EDGE_CURVE('',#139520,#139562,#139564,.T.); +#139562 = VERTEX_POINT('',#139563); +#139563 = CARTESIAN_POINT('',(-7.6,-2.4,-6.086416329433)); +#139564 = LINE('',#139565,#139566); +#139565 = CARTESIAN_POINT('',(-7.6,-1.863548826735,-6.086416329433)); +#139566 = VECTOR('',#139567,1.); +#139567 = DIRECTION('',(0.,-1.,0.)); +#139568 = ORIENTED_EDGE('',*,*,#139547,.F.); +#139569 = ORIENTED_EDGE('',*,*,#139440,.F.); +#139570 = ORIENTED_EDGE('',*,*,#139571,.F.); +#139571 = EDGE_CURVE('',#139562,#139433,#139572,.T.); +#139572 = LINE('',#139573,#139574); +#139573 = CARTESIAN_POINT('',(-7.6,-2.4,-6.086416329433)); +#139574 = VECTOR('',#139575,1.); +#139575 = DIRECTION('',(1.,0.,0.)); +#139576 = PLANE('',#139577); +#139577 = AXIS2_PLACEMENT_3D('',#139578,#139579,#139580); +#139578 = CARTESIAN_POINT('',(-6.,-1.863548826735,-6.086416329433)); +#139579 = DIRECTION('',(0.,0.,-1.)); +#139580 = DIRECTION('',(0.,-1.,0.)); +#139581 = ADVANCED_FACE('',(#139582),#139593,.T.); +#139582 = FACE_BOUND('',#139583,.T.); +#139583 = EDGE_LOOP('',(#139584,#139585,#139591,#139592)); +#139584 = ORIENTED_EDGE('',*,*,#138446,.T.); +#139585 = ORIENTED_EDGE('',*,*,#139586,.F.); +#139586 = EDGE_CURVE('',#139562,#138439,#139587,.T.); +#139587 = LINE('',#139588,#139589); +#139588 = CARTESIAN_POINT('',(-7.6,-2.4,-6.086416329433)); +#139589 = VECTOR('',#139590,1.); +#139590 = DIRECTION('',(0.,0.,-1.)); +#139591 = ORIENTED_EDGE('',*,*,#139571,.T.); +#139592 = ORIENTED_EDGE('',*,*,#139432,.T.); +#139593 = PLANE('',#139594); +#139594 = AXIS2_PLACEMENT_3D('',#139595,#139596,#139597); +#139595 = CARTESIAN_POINT('',(-6.,-2.4,-11.2)); +#139596 = DIRECTION('',(-0.,1.,0.)); +#139597 = DIRECTION('',(1.,0.,0.)); +#139598 = ADVANCED_FACE('',(#139599),#139679,.T.); +#139599 = FACE_BOUND('',#139600,.T.); +#139600 = EDGE_LOOP('',(#139601,#139611,#139619,#139627,#139633,#139634, + #139635,#139636,#139637,#139638,#139639,#139640,#139648,#139656, + #139664,#139672)); +#139601 = ORIENTED_EDGE('',*,*,#139602,.T.); +#139602 = EDGE_CURVE('',#139603,#139605,#139607,.T.); +#139603 = VERTEX_POINT('',#139604); +#139604 = CARTESIAN_POINT('',(-7.6,1.564872848673,-4.790031893223)); +#139605 = VERTEX_POINT('',#139606); +#139606 = CARTESIAN_POINT('',(-7.6,3.224780407747,-4.790031893223)); +#139607 = LINE('',#139608,#139609); +#139608 = CARTESIAN_POINT('',(-7.6,1.564872848673,-4.790031893223)); +#139609 = VECTOR('',#139610,1.); +#139610 = DIRECTION('',(0.,1.,0.)); +#139611 = ORIENTED_EDGE('',*,*,#139612,.T.); +#139612 = EDGE_CURVE('',#139605,#139613,#139615,.T.); +#139613 = VERTEX_POINT('',#139614); +#139614 = CARTESIAN_POINT('',(-7.6,3.224780407747,-9.63058359573)); +#139615 = LINE('',#139616,#139617); +#139616 = CARTESIAN_POINT('',(-7.6,3.224780407747,-4.790031893223)); +#139617 = VECTOR('',#139618,1.); +#139618 = DIRECTION('',(0.,0.,-1.)); +#139619 = ORIENTED_EDGE('',*,*,#139620,.T.); +#139620 = EDGE_CURVE('',#139613,#139621,#139623,.T.); +#139621 = VERTEX_POINT('',#139622); +#139622 = CARTESIAN_POINT('',(-7.6,4.4662,-9.63058359573)); +#139623 = LINE('',#139624,#139625); +#139624 = CARTESIAN_POINT('',(-7.6,3.224780407747,-9.63058359573)); +#139625 = VECTOR('',#139626,1.); +#139626 = DIRECTION('',(0.,1.,0.)); +#139627 = ORIENTED_EDGE('',*,*,#139628,.T.); +#139628 = EDGE_CURVE('',#139621,#138252,#139629,.T.); +#139629 = LINE('',#139630,#139631); +#139630 = CARTESIAN_POINT('',(-7.6,4.4662,-9.63058359573)); +#139631 = VECTOR('',#139632,1.); +#139632 = DIRECTION('',(0.,0.,-1.)); +#139633 = ORIENTED_EDGE('',*,*,#138251,.T.); +#139634 = ORIENTED_EDGE('',*,*,#139471,.T.); +#139635 = ORIENTED_EDGE('',*,*,#139495,.T.); +#139636 = ORIENTED_EDGE('',*,*,#139519,.T.); +#139637 = ORIENTED_EDGE('',*,*,#139561,.T.); +#139638 = ORIENTED_EDGE('',*,*,#139586,.T.); +#139639 = ORIENTED_EDGE('',*,*,#138438,.T.); +#139640 = ORIENTED_EDGE('',*,*,#139641,.T.); +#139641 = EDGE_CURVE('',#138431,#139642,#139644,.T.); +#139642 = VERTEX_POINT('',#139643); +#139643 = CARTESIAN_POINT('',(-7.6,-4.4662,-9.63058359573)); +#139644 = LINE('',#139645,#139646); +#139645 = CARTESIAN_POINT('',(-7.6,-4.4662,-11.2)); +#139646 = VECTOR('',#139647,1.); +#139647 = DIRECTION('',(0.,0.,1.)); +#139648 = ORIENTED_EDGE('',*,*,#139649,.T.); +#139649 = EDGE_CURVE('',#139642,#139650,#139652,.T.); +#139650 = VERTEX_POINT('',#139651); +#139651 = CARTESIAN_POINT('',(-7.6,-3.224780407747,-9.63058359573)); +#139652 = LINE('',#139653,#139654); +#139653 = CARTESIAN_POINT('',(-7.6,-4.4662,-9.63058359573)); +#139654 = VECTOR('',#139655,1.); +#139655 = DIRECTION('',(0.,1.,0.)); +#139656 = ORIENTED_EDGE('',*,*,#139657,.T.); +#139657 = EDGE_CURVE('',#139650,#139658,#139660,.T.); +#139658 = VERTEX_POINT('',#139659); +#139659 = CARTESIAN_POINT('',(-7.6,-3.224780407747,-4.790031893223)); +#139660 = LINE('',#139661,#139662); +#139661 = CARTESIAN_POINT('',(-7.6,-3.224780407747,-9.63058359573)); +#139662 = VECTOR('',#139663,1.); +#139663 = DIRECTION('',(0.,0.,1.)); +#139664 = ORIENTED_EDGE('',*,*,#139665,.T.); +#139665 = EDGE_CURVE('',#139658,#139666,#139668,.T.); +#139666 = VERTEX_POINT('',#139667); +#139667 = CARTESIAN_POINT('',(-7.6,-1.564872848673,-4.790031893223)); +#139668 = LINE('',#139669,#139670); +#139669 = CARTESIAN_POINT('',(-7.6,-3.224780407747,-4.790031893223)); +#139670 = VECTOR('',#139671,1.); +#139671 = DIRECTION('',(0.,1.,0.)); +#139672 = ORIENTED_EDGE('',*,*,#139673,.F.); +#139673 = EDGE_CURVE('',#139603,#139666,#139674,.T.); +#139674 = CIRCLE('',#139675,1.56746061332); +#139675 = AXIS2_PLACEMENT_3D('',#139676,#139677,#139678); +#139676 = CARTESIAN_POINT('',(-7.6,0.,-4.7)); +#139677 = DIRECTION('',(-1.,0.,0.)); +#139678 = DIRECTION('',(0.,0.99834907198,-5.743805774631E-02)); +#139679 = PLANE('',#139680); +#139680 = AXIS2_PLACEMENT_3D('',#139681,#139682,#139683); +#139681 = CARTESIAN_POINT('',(-7.6,0.,-11.2)); +#139682 = DIRECTION('',(-1.,0.,0.)); +#139683 = DIRECTION('',(0.,0.,1.)); +#139684 = ADVANCED_FACE('',(#139685),#139709,.F.); +#139685 = FACE_BOUND('',#139686,.F.); +#139686 = EDGE_LOOP('',(#139687,#139688,#139696,#139703)); +#139687 = ORIENTED_EDGE('',*,*,#139673,.F.); +#139688 = ORIENTED_EDGE('',*,*,#139689,.F.); +#139689 = EDGE_CURVE('',#139690,#139603,#139692,.T.); +#139690 = VERTEX_POINT('',#139691); +#139691 = CARTESIAN_POINT('',(-7.1,1.564872848673,-4.790031893223)); +#139692 = LINE('',#139693,#139694); +#139693 = CARTESIAN_POINT('',(-7.1,1.564872848673,-4.790031893223)); +#139694 = VECTOR('',#139695,1.); +#139695 = DIRECTION('',(-1.,0.,0.)); +#139696 = ORIENTED_EDGE('',*,*,#139697,.T.); +#139697 = EDGE_CURVE('',#139690,#136118,#139698,.T.); +#139698 = CIRCLE('',#139699,1.56746061332); +#139699 = AXIS2_PLACEMENT_3D('',#139700,#139701,#139702); +#139700 = CARTESIAN_POINT('',(-7.1,0.,-4.7)); +#139701 = DIRECTION('',(-1.,0.,0.)); +#139702 = DIRECTION('',(0.,0.99834907198,-5.743805774631E-02)); +#139703 = ORIENTED_EDGE('',*,*,#139704,.T.); +#139704 = EDGE_CURVE('',#136118,#139666,#139705,.T.); +#139705 = LINE('',#139706,#139707); +#139706 = CARTESIAN_POINT('',(-7.1,-1.564872848673,-4.790031893223)); +#139707 = VECTOR('',#139708,1.); +#139708 = DIRECTION('',(-1.,0.,0.)); +#139709 = CYLINDRICAL_SURFACE('',#139710,1.56746061332); +#139710 = AXIS2_PLACEMENT_3D('',#139711,#139712,#139713); +#139711 = CARTESIAN_POINT('',(-7.6,0.,-4.7)); +#139712 = DIRECTION('',(-1.,0.,0.)); +#139713 = DIRECTION('',(0.,-1.,0.)); +#139714 = ADVANCED_FACE('',(#139715),#139741,.T.); +#139715 = FACE_BOUND('',#139716,.T.); +#139716 = EDGE_LOOP('',(#139717,#139725,#139733,#139739,#139740)); +#139717 = ORIENTED_EDGE('',*,*,#139718,.F.); +#139718 = EDGE_CURVE('',#139719,#139690,#139721,.T.); +#139719 = VERTEX_POINT('',#139720); +#139720 = CARTESIAN_POINT('',(-6.,1.564872848673,-4.790031893223)); +#139721 = LINE('',#139722,#139723); +#139722 = CARTESIAN_POINT('',(-6.,1.564872848673,-4.790031893223)); +#139723 = VECTOR('',#139724,1.); +#139724 = DIRECTION('',(-1.,0.,0.)); +#139725 = ORIENTED_EDGE('',*,*,#139726,.T.); +#139726 = EDGE_CURVE('',#139719,#139727,#139729,.T.); +#139727 = VERTEX_POINT('',#139728); +#139728 = CARTESIAN_POINT('',(-6.,3.224780407747,-4.790031893223)); +#139729 = LINE('',#139730,#139731); +#139730 = CARTESIAN_POINT('',(-6.,1.564872848673,-4.790031893223)); +#139731 = VECTOR('',#139732,1.); +#139732 = DIRECTION('',(0.,1.,0.)); +#139733 = ORIENTED_EDGE('',*,*,#139734,.T.); +#139734 = EDGE_CURVE('',#139727,#139605,#139735,.T.); +#139735 = LINE('',#139736,#139737); +#139736 = CARTESIAN_POINT('',(-6.,3.224780407747,-4.790031893223)); +#139737 = VECTOR('',#139738,1.); +#139738 = DIRECTION('',(-1.,0.,0.)); +#139739 = ORIENTED_EDGE('',*,*,#139602,.F.); +#139740 = ORIENTED_EDGE('',*,*,#139689,.F.); +#139741 = PLANE('',#139742); +#139742 = AXIS2_PLACEMENT_3D('',#139743,#139744,#139745); +#139743 = CARTESIAN_POINT('',(-6.,1.564872848673,-4.790031893223)); +#139744 = DIRECTION('',(0.,0.,1.)); +#139745 = DIRECTION('',(1.,0.,-0.)); +#139746 = ADVANCED_FACE('',(#139747),#139765,.T.); +#139747 = FACE_BOUND('',#139748,.T.); +#139748 = EDGE_LOOP('',(#139749,#139757,#139758,#139759)); +#139749 = ORIENTED_EDGE('',*,*,#139750,.T.); +#139750 = EDGE_CURVE('',#139751,#139613,#139753,.T.); +#139751 = VERTEX_POINT('',#139752); +#139752 = CARTESIAN_POINT('',(-6.,3.224780407747,-9.63058359573)); +#139753 = LINE('',#139754,#139755); +#139754 = CARTESIAN_POINT('',(-6.,3.224780407747,-9.63058359573)); +#139755 = VECTOR('',#139756,1.); +#139756 = DIRECTION('',(-1.,0.,0.)); +#139757 = ORIENTED_EDGE('',*,*,#139612,.F.); +#139758 = ORIENTED_EDGE('',*,*,#139734,.F.); +#139759 = ORIENTED_EDGE('',*,*,#139760,.T.); +#139760 = EDGE_CURVE('',#139727,#139751,#139761,.T.); +#139761 = LINE('',#139762,#139763); +#139762 = CARTESIAN_POINT('',(-6.,3.224780407747,-4.790031893223)); +#139763 = VECTOR('',#139764,1.); +#139764 = DIRECTION('',(0.,0.,-1.)); +#139765 = PLANE('',#139766); +#139766 = AXIS2_PLACEMENT_3D('',#139767,#139768,#139769); +#139767 = CARTESIAN_POINT('',(-6.,3.224780407747,-4.790031893223)); +#139768 = DIRECTION('',(-0.,1.,0.)); +#139769 = DIRECTION('',(1.,0.,0.)); +#139770 = ADVANCED_FACE('',(#139771),#139877,.T.); +#139771 = FACE_BOUND('',#139772,.T.); +#139772 = EDGE_LOOP('',(#139773,#139781,#139782,#139790,#139798,#139804, + #139805,#139806,#139813,#139814,#139815,#139823,#139831,#139839, + #139847,#139855,#139863,#139871)); +#139773 = ORIENTED_EDGE('',*,*,#139774,.F.); +#139774 = EDGE_CURVE('',#139221,#139775,#139777,.T.); +#139775 = VERTEX_POINT('',#139776); +#139776 = CARTESIAN_POINT('',(-6.,2.5,-2.9)); +#139777 = LINE('',#139778,#139779); +#139778 = CARTESIAN_POINT('',(-6.,6.,-2.9)); +#139779 = VECTOR('',#139780,1.); +#139780 = DIRECTION('',(0.,-1.,0.)); +#139781 = ORIENTED_EDGE('',*,*,#139220,.F.); +#139782 = ORIENTED_EDGE('',*,*,#139783,.F.); +#139783 = EDGE_CURVE('',#139784,#139213,#139786,.T.); +#139784 = VERTEX_POINT('',#139785); +#139785 = CARTESIAN_POINT('',(-6.,4.4662,-10.8)); +#139786 = LINE('',#139787,#139788); +#139787 = CARTESIAN_POINT('',(-6.,4.4662,-10.8)); +#139788 = VECTOR('',#139789,1.); +#139789 = DIRECTION('',(0.,1.,0.)); +#139790 = ORIENTED_EDGE('',*,*,#139791,.T.); +#139791 = EDGE_CURVE('',#139784,#139792,#139794,.T.); +#139792 = VERTEX_POINT('',#139793); +#139793 = CARTESIAN_POINT('',(-6.,4.4662,-9.63058359573)); +#139794 = LINE('',#139795,#139796); +#139795 = CARTESIAN_POINT('',(-6.,4.4662,-10.8)); +#139796 = VECTOR('',#139797,1.); +#139797 = DIRECTION('',(0.,0.,1.)); +#139798 = ORIENTED_EDGE('',*,*,#139799,.F.); +#139799 = EDGE_CURVE('',#139751,#139792,#139800,.T.); +#139800 = LINE('',#139801,#139802); +#139801 = CARTESIAN_POINT('',(-6.,3.224780407747,-9.63058359573)); +#139802 = VECTOR('',#139803,1.); +#139803 = DIRECTION('',(0.,1.,0.)); +#139804 = ORIENTED_EDGE('',*,*,#139760,.F.); +#139805 = ORIENTED_EDGE('',*,*,#139726,.F.); +#139806 = ORIENTED_EDGE('',*,*,#139807,.F.); +#139807 = EDGE_CURVE('',#136068,#139719,#139808,.T.); +#139808 = CIRCLE('',#139809,1.56746061332); +#139809 = AXIS2_PLACEMENT_3D('',#139810,#139811,#139812); +#139810 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#139811 = DIRECTION('',(-1.,0.,0.)); +#139812 = DIRECTION('',(-0.,-0.99834907198,-5.743805774631E-02)); +#139813 = ORIENTED_EDGE('',*,*,#136065,.F.); +#139814 = ORIENTED_EDGE('',*,*,#136107,.F.); +#139815 = ORIENTED_EDGE('',*,*,#139816,.F.); +#139816 = EDGE_CURVE('',#139817,#136108,#139819,.T.); +#139817 = VERTEX_POINT('',#139818); +#139818 = CARTESIAN_POINT('',(-6.,-3.224780407747,-4.790031893223)); +#139819 = LINE('',#139820,#139821); +#139820 = CARTESIAN_POINT('',(-6.,-3.224780407747,-4.790031893223)); +#139821 = VECTOR('',#139822,1.); +#139822 = DIRECTION('',(0.,1.,0.)); +#139823 = ORIENTED_EDGE('',*,*,#139824,.F.); +#139824 = EDGE_CURVE('',#139825,#139817,#139827,.T.); +#139825 = VERTEX_POINT('',#139826); +#139826 = CARTESIAN_POINT('',(-6.,-3.224780407747,-9.63058359573)); +#139827 = LINE('',#139828,#139829); +#139828 = CARTESIAN_POINT('',(-6.,-3.224780407747,-9.63058359573)); +#139829 = VECTOR('',#139830,1.); +#139830 = DIRECTION('',(0.,0.,1.)); +#139831 = ORIENTED_EDGE('',*,*,#139832,.F.); +#139832 = EDGE_CURVE('',#139833,#139825,#139835,.T.); +#139833 = VERTEX_POINT('',#139834); +#139834 = CARTESIAN_POINT('',(-6.,-4.4662,-9.63058359573)); +#139835 = LINE('',#139836,#139837); +#139836 = CARTESIAN_POINT('',(-6.,-4.4662,-9.63058359573)); +#139837 = VECTOR('',#139838,1.); +#139838 = DIRECTION('',(0.,1.,0.)); +#139839 = ORIENTED_EDGE('',*,*,#139840,.F.); +#139840 = EDGE_CURVE('',#139841,#139833,#139843,.T.); +#139841 = VERTEX_POINT('',#139842); +#139842 = CARTESIAN_POINT('',(-6.,-4.4662,-10.8)); +#139843 = LINE('',#139844,#139845); +#139844 = CARTESIAN_POINT('',(-6.,-4.4662,-10.8)); +#139845 = VECTOR('',#139846,1.); +#139846 = DIRECTION('',(0.,0.,1.)); +#139847 = ORIENTED_EDGE('',*,*,#139848,.F.); +#139848 = EDGE_CURVE('',#139849,#139841,#139851,.T.); +#139849 = VERTEX_POINT('',#139850); +#139850 = CARTESIAN_POINT('',(-6.,-6.,-10.8)); +#139851 = LINE('',#139852,#139853); +#139852 = CARTESIAN_POINT('',(-6.,-6.,-10.8)); +#139853 = VECTOR('',#139854,1.); +#139854 = DIRECTION('',(0.,1.,0.)); +#139855 = ORIENTED_EDGE('',*,*,#139856,.T.); +#139856 = EDGE_CURVE('',#139849,#139857,#139859,.T.); +#139857 = VERTEX_POINT('',#139858); +#139858 = CARTESIAN_POINT('',(-6.,-6.,-2.9)); +#139859 = LINE('',#139860,#139861); +#139860 = CARTESIAN_POINT('',(-6.,-6.,-10.8)); +#139861 = VECTOR('',#139862,1.); +#139862 = DIRECTION('',(0.,0.,1.)); +#139863 = ORIENTED_EDGE('',*,*,#139864,.F.); +#139864 = EDGE_CURVE('',#139865,#139857,#139867,.T.); +#139865 = VERTEX_POINT('',#139866); +#139866 = CARTESIAN_POINT('',(-6.,-2.5,-2.9)); +#139867 = LINE('',#139868,#139869); +#139868 = CARTESIAN_POINT('',(-6.,-2.5,-2.9)); +#139869 = VECTOR('',#139870,1.); +#139870 = DIRECTION('',(0.,-1.,0.)); +#139871 = ORIENTED_EDGE('',*,*,#139872,.F.); +#139872 = EDGE_CURVE('',#139775,#139865,#139873,.T.); +#139873 = LINE('',#139874,#139875); +#139874 = CARTESIAN_POINT('',(-6.,2.5,-2.9)); +#139875 = VECTOR('',#139876,1.); +#139876 = DIRECTION('',(0.,-1.,0.)); +#139877 = PLANE('',#139878); +#139878 = AXIS2_PLACEMENT_3D('',#139879,#139880,#139881); +#139879 = CARTESIAN_POINT('',(-6.,-6.,-11.2)); +#139880 = DIRECTION('',(-1.,0.,0.)); +#139881 = DIRECTION('',(0.,0.,1.)); +#139882 = ADVANCED_FACE('',(#139883),#139995,.T.); +#139883 = FACE_BOUND('',#139884,.T.); +#139884 = EDGE_LOOP('',(#139885,#139896,#139917,#139925,#139946,#139955, + #139963,#139972,#139980,#139989)); +#139885 = ORIENTED_EDGE('',*,*,#139886,.F.); +#139886 = EDGE_CURVE('',#139887,#139889,#139891,.T.); +#139887 = VERTEX_POINT('',#139888); +#139888 = CARTESIAN_POINT('',(3.052148932006,1.75,1.185133464537)); +#139889 = VERTEX_POINT('',#139890); +#139890 = CARTESIAN_POINT('',(2.176872874149,1.75,1.6)); +#139891 = CIRCLE('',#139892,6.123469387755); +#139892 = AXIS2_PLACEMENT_3D('',#139893,#139894,#139895); +#139893 = CARTESIAN_POINT('',(0.,1.75,-4.123469387755)); +#139894 = DIRECTION('',(0.,-1.,0.)); +#139895 = DIRECTION('',(0.498434760873,0.,0.866927210989)); +#139896 = ORIENTED_EDGE('',*,*,#139897,.T.); +#139897 = EDGE_CURVE('',#139887,#139898,#139900,.T.); +#139898 = VERTEX_POINT('',#139899); +#139899 = CARTESIAN_POINT('',(4.05215,0.749999830679,0.467495404124)); +#139900 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#139901,#139902,#139903, + #139904,#139905,#139906,#139907,#139908,#139909,#139910,#139911, + #139912,#139913,#139914,#139915,#139916),.UNSPECIFIED.,.F.,.F.,(4,1, + 1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.),.UNSPECIFIED.); +#139901 = CARTESIAN_POINT('',(3.052148932006,1.75,1.185133464537)); +#139902 = CARTESIAN_POINT('',(3.096188598666,1.749982307142, + 1.159813114175)); +#139903 = CARTESIAN_POINT('',(3.183652089022,1.744185868609, + 1.108058774906)); +#139904 = CARTESIAN_POINT('',(3.312189201937,1.718634725344, + 1.027657657662)); +#139905 = CARTESIAN_POINT('',(3.440194444046,1.674947077642, + 0.943038189063)); +#139906 = CARTESIAN_POINT('',(3.55916341745,1.615265701642, + 0.860076864572)); +#139907 = CARTESIAN_POINT('',(3.667229682759,1.541886155475, + 0.780986869627)); +#139908 = CARTESIAN_POINT('',(3.762164746611,1.457895056935, + 0.708416469764)); +#139909 = CARTESIAN_POINT('',(3.842998005687,1.365936836751, + 0.644258791257)); +#139910 = CARTESIAN_POINT('',(3.909964403735,1.268308120042, + 0.589393199999)); +#139911 = CARTESIAN_POINT('',(3.963431352302,1.166992031469, + 0.544437678348)); +#139912 = CARTESIAN_POINT('',(4.004618174715,1.061494407699, + 0.509090278354)); +#139913 = CARTESIAN_POINT('',(4.033107351874,0.954063657885, + 0.484262167848)); +#139914 = CARTESIAN_POINT('',(4.04879914754,0.850370305455, + 0.470456068694)); +#139915 = CARTESIAN_POINT('',(4.052275782196,0.783110448921, + 0.467384384251)); +#139916 = CARTESIAN_POINT('',(4.05215,0.749999830679,0.467495404124)); +#139917 = ORIENTED_EDGE('',*,*,#139918,.T.); +#139918 = EDGE_CURVE('',#139898,#139919,#139921,.T.); +#139919 = VERTEX_POINT('',#139920); +#139920 = CARTESIAN_POINT('',(4.05215,-0.750000018887,0.467495404124)); +#139921 = LINE('',#139922,#139923); +#139922 = CARTESIAN_POINT('',(4.05215,0.749999830679,0.467495404124)); +#139923 = VECTOR('',#139924,1.); +#139924 = DIRECTION('',(1.592800125737E-13,-1.,1.79597095962E-13)); +#139925 = ORIENTED_EDGE('',*,*,#139926,.T.); +#139926 = EDGE_CURVE('',#139919,#139927,#139929,.T.); +#139927 = VERTEX_POINT('',#139928); +#139928 = CARTESIAN_POINT('',(3.052148090245,-1.75,1.185133948138)); +#139929 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#139930,#139931,#139932, + #139933,#139934,#139935,#139936,#139937,#139938,#139939,#139940, + #139941,#139942,#139943,#139944,#139945),.UNSPECIFIED.,.F.,.F.,(4,1, + 1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.),.UNSPECIFIED.); +#139930 = CARTESIAN_POINT('',(4.05215,-0.750000018887,0.467495404124)); +#139931 = CARTESIAN_POINT('',(4.052275730033,-0.783111428206, + 0.467384430292)); +#139932 = CARTESIAN_POINT('',(4.048799023266,-0.850372033943, + 0.470456178741)); +#139933 = CARTESIAN_POINT('',(4.033106893272,-0.954065683891, + 0.484262569456)); +#139934 = CARTESIAN_POINT('',(4.004618119719,-1.06149427499, + 0.509090322794)); +#139935 = CARTESIAN_POINT('',(3.963432188762,-1.166990051863, + 0.544436962628)); +#139936 = CARTESIAN_POINT('',(3.909966184753,-1.268305081209, + 0.589391715717)); +#139937 = CARTESIAN_POINT('',(3.843000679278,-1.365933383556, + 0.644256629809)); +#139938 = CARTESIAN_POINT('',(3.762167814318,-1.45789211663, + 0.708414083023)); +#139939 = CARTESIAN_POINT('',(3.667231843249,-1.541884477515, + 0.780985272123)); +#139940 = CARTESIAN_POINT('',(3.559163911187,-1.615265452735, + 0.860076523885)); +#139941 = CARTESIAN_POINT('',(3.44019475247,-1.674946956069, + 0.943037977613)); +#139942 = CARTESIAN_POINT('',(3.312189841644,-1.718634514435, + 1.027657237634)); +#139943 = CARTESIAN_POINT('',(3.183652940174,-1.744185833227, + 1.108058275261)); +#139944 = CARTESIAN_POINT('',(3.096187948523,-1.749982295863, + 1.159813487607)); +#139945 = CARTESIAN_POINT('',(3.052148090245,-1.75,1.185133948138)); +#139946 = ORIENTED_EDGE('',*,*,#139947,.T.); +#139947 = EDGE_CURVE('',#139927,#139948,#139950,.T.); +#139948 = VERTEX_POINT('',#139949); +#139949 = CARTESIAN_POINT('',(2.176872874149,-1.75,1.6)); +#139950 = CIRCLE('',#139951,6.123469387755); +#139951 = AXIS2_PLACEMENT_3D('',#139952,#139953,#139954); +#139952 = CARTESIAN_POINT('',(0.,-1.75,-4.123469387755)); +#139953 = DIRECTION('',(0.,-1.,0.)); +#139954 = DIRECTION('',(0.498434760873,0.,0.866927210989)); +#139955 = ORIENTED_EDGE('',*,*,#139956,.T.); +#139956 = EDGE_CURVE('',#139948,#139957,#139959,.T.); +#139957 = VERTEX_POINT('',#139958); +#139958 = CARTESIAN_POINT('',(2.176872874149,-2.5,1.6)); +#139959 = LINE('',#139960,#139961); +#139960 = CARTESIAN_POINT('',(2.176872874149,-1.75,1.6)); +#139961 = VECTOR('',#139962,1.); +#139962 = DIRECTION('',(0.,-1.,0.)); +#139963 = ORIENTED_EDGE('',*,*,#139964,.F.); +#139964 = EDGE_CURVE('',#139965,#139957,#139967,.T.); +#139965 = VERTEX_POINT('',#139966); +#139966 = CARTESIAN_POINT('',(6.,-2.5,-2.9)); +#139967 = CIRCLE('',#139968,6.123469387755); +#139968 = AXIS2_PLACEMENT_3D('',#139969,#139970,#139971); +#139969 = CARTESIAN_POINT('',(0.,-2.5,-4.123469387755)); +#139970 = DIRECTION('',(0.,-1.,0.)); +#139971 = DIRECTION('',(0.979836693884,0.,0.199800033328)); +#139972 = ORIENTED_EDGE('',*,*,#139973,.F.); +#139973 = EDGE_CURVE('',#139974,#139965,#139976,.T.); +#139974 = VERTEX_POINT('',#139975); +#139975 = CARTESIAN_POINT('',(6.,2.5,-2.9)); +#139976 = LINE('',#139977,#139978); +#139977 = CARTESIAN_POINT('',(6.,2.5,-2.9)); +#139978 = VECTOR('',#139979,1.); +#139979 = DIRECTION('',(0.,-1.,0.)); +#139980 = ORIENTED_EDGE('',*,*,#139981,.T.); +#139981 = EDGE_CURVE('',#139974,#139982,#139984,.T.); +#139982 = VERTEX_POINT('',#139983); +#139983 = CARTESIAN_POINT('',(2.176872874149,2.5,1.6)); +#139984 = CIRCLE('',#139985,6.123469387755); +#139985 = AXIS2_PLACEMENT_3D('',#139986,#139987,#139988); +#139986 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#139987 = DIRECTION('',(0.,-1.,0.)); +#139988 = DIRECTION('',(0.979836693884,0.,0.199800033328)); +#139989 = ORIENTED_EDGE('',*,*,#139990,.T.); +#139990 = EDGE_CURVE('',#139982,#139889,#139991,.T.); +#139991 = LINE('',#139992,#139993); +#139992 = CARTESIAN_POINT('',(2.176872874149,2.5,1.6)); +#139993 = VECTOR('',#139994,1.); +#139994 = DIRECTION('',(0.,-1.,0.)); +#139995 = CYLINDRICAL_SURFACE('',#139996,6.123469387755); +#139996 = AXIS2_PLACEMENT_3D('',#139997,#139998,#139999); +#139997 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#139998 = DIRECTION('',(0.,-1.,0.)); +#139999 = DIRECTION('',(1.,0.,0.)); +#140000 = ADVANCED_FACE('',(#140001),#140104,.T.); +#140001 = FACE_BOUND('',#140002,.T.); +#140002 = EDGE_LOOP('',(#140003,#140012,#140013,#140022,#140030,#140039, + #140060,#140068,#140089,#140098)); +#140003 = ORIENTED_EDGE('',*,*,#140004,.T.); +#140004 = EDGE_CURVE('',#140005,#139775,#140007,.T.); +#140005 = VERTEX_POINT('',#140006); +#140006 = CARTESIAN_POINT('',(-2.176872874149,2.5,1.6)); +#140007 = CIRCLE('',#140008,6.123469387755); +#140008 = AXIS2_PLACEMENT_3D('',#140009,#140010,#140011); +#140009 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#140010 = DIRECTION('',(0.,-1.,0.)); +#140011 = DIRECTION('',(-0.355496653335,0.,0.934677553741)); +#140012 = ORIENTED_EDGE('',*,*,#139872,.T.); +#140013 = ORIENTED_EDGE('',*,*,#140014,.F.); +#140014 = EDGE_CURVE('',#140015,#139865,#140017,.T.); +#140015 = VERTEX_POINT('',#140016); +#140016 = CARTESIAN_POINT('',(-2.176872874149,-2.5,1.6)); +#140017 = CIRCLE('',#140018,6.123469387755); +#140018 = AXIS2_PLACEMENT_3D('',#140019,#140020,#140021); +#140019 = CARTESIAN_POINT('',(0.,-2.5,-4.123469387755)); +#140020 = DIRECTION('',(0.,-1.,0.)); +#140021 = DIRECTION('',(-0.355496653335,0.,0.934677553741)); +#140022 = ORIENTED_EDGE('',*,*,#140023,.F.); +#140023 = EDGE_CURVE('',#140024,#140015,#140026,.T.); +#140024 = VERTEX_POINT('',#140025); +#140025 = CARTESIAN_POINT('',(-2.176872874149,-1.75,1.6)); +#140026 = LINE('',#140027,#140028); +#140027 = CARTESIAN_POINT('',(-2.176872874149,-1.75,1.6)); +#140028 = VECTOR('',#140029,1.); +#140029 = DIRECTION('',(0.,-1.,0.)); +#140030 = ORIENTED_EDGE('',*,*,#140031,.T.); +#140031 = EDGE_CURVE('',#140024,#140032,#140034,.T.); +#140032 = VERTEX_POINT('',#140033); +#140033 = CARTESIAN_POINT('',(-3.052148932006,-1.75,1.185133464537)); +#140034 = CIRCLE('',#140035,6.123469387755); +#140035 = AXIS2_PLACEMENT_3D('',#140036,#140037,#140038); +#140036 = CARTESIAN_POINT('',(0.,-1.75,-4.123469387755)); +#140037 = DIRECTION('',(0.,-1.,0.)); +#140038 = DIRECTION('',(-0.355496653335,0.,0.934677553741)); +#140039 = ORIENTED_EDGE('',*,*,#140040,.T.); +#140040 = EDGE_CURVE('',#140032,#140041,#140043,.T.); +#140041 = VERTEX_POINT('',#140042); +#140042 = CARTESIAN_POINT('',(-4.05215,-0.749999830679,0.467495404124)); +#140043 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140044,#140045,#140046, + #140047,#140048,#140049,#140050,#140051,#140052,#140053,#140054, + #140055,#140056,#140057,#140058,#140059),.UNSPECIFIED.,.F.,.F.,(4,1, + 1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.),.UNSPECIFIED.); +#140044 = CARTESIAN_POINT('',(-3.052148932006,-1.75,1.185133464537)); +#140045 = CARTESIAN_POINT('',(-3.096188598666,-1.749982307142, + 1.159813114175)); +#140046 = CARTESIAN_POINT('',(-3.183652089022,-1.744185868609, + 1.108058774906)); +#140047 = CARTESIAN_POINT('',(-3.312189201937,-1.718634725344, + 1.027657657662)); +#140048 = CARTESIAN_POINT('',(-3.440194444046,-1.674947077642, + 0.943038189063)); +#140049 = CARTESIAN_POINT('',(-3.55916341745,-1.615265701642, + 0.860076864572)); +#140050 = CARTESIAN_POINT('',(-3.667229682759,-1.541886155475, + 0.780986869627)); +#140051 = CARTESIAN_POINT('',(-3.762164746611,-1.457895056935, + 0.708416469764)); +#140052 = CARTESIAN_POINT('',(-3.842998005687,-1.365936836751, + 0.644258791257)); +#140053 = CARTESIAN_POINT('',(-3.909964403735,-1.268308120042, + 0.589393199999)); +#140054 = CARTESIAN_POINT('',(-3.963431352302,-1.166992031469, + 0.544437678348)); +#140055 = CARTESIAN_POINT('',(-4.004618174715,-1.061494407699, + 0.509090278354)); +#140056 = CARTESIAN_POINT('',(-4.033107351874,-0.954063657885, + 0.484262167848)); +#140057 = CARTESIAN_POINT('',(-4.04879914754,-0.850370305455, + 0.470456068694)); +#140058 = CARTESIAN_POINT('',(-4.052275782196,-0.783110448921, + 0.467384384251)); +#140059 = CARTESIAN_POINT('',(-4.05215,-0.749999830679,0.467495404124)); +#140060 = ORIENTED_EDGE('',*,*,#140061,.F.); +#140061 = EDGE_CURVE('',#140062,#140041,#140064,.T.); +#140062 = VERTEX_POINT('',#140063); +#140063 = CARTESIAN_POINT('',(-4.05215,0.750000018887,0.467495404124)); +#140064 = LINE('',#140065,#140066); +#140065 = CARTESIAN_POINT('',(-4.05215,0.750000018887,0.467495404124)); +#140066 = VECTOR('',#140067,1.); +#140067 = DIRECTION('',(1.586878935679E-13,-1.,-1.79597095962E-13)); +#140068 = ORIENTED_EDGE('',*,*,#140069,.T.); +#140069 = EDGE_CURVE('',#140062,#140070,#140072,.T.); +#140070 = VERTEX_POINT('',#140071); +#140071 = CARTESIAN_POINT('',(-3.052148090245,1.75,1.185133948138)); +#140072 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140073,#140074,#140075, + #140076,#140077,#140078,#140079,#140080,#140081,#140082,#140083, + #140084,#140085,#140086,#140087,#140088),.UNSPECIFIED.,.F.,.F.,(4,1, + 1,1,1,1,1,1,1,1,1,1,1,4),(0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.),.UNSPECIFIED.); +#140073 = CARTESIAN_POINT('',(-4.05215,0.750000018887,0.467495404124)); +#140074 = CARTESIAN_POINT('',(-4.052275730033,0.783111428206, + 0.467384430292)); +#140075 = CARTESIAN_POINT('',(-4.048799023266,0.850372033943, + 0.470456178741)); +#140076 = CARTESIAN_POINT('',(-4.033106893272,0.954065683891, + 0.484262569456)); +#140077 = CARTESIAN_POINT('',(-4.004618119719,1.06149427499, + 0.509090322794)); +#140078 = CARTESIAN_POINT('',(-3.963432188762,1.166990051863, + 0.544436962628)); +#140079 = CARTESIAN_POINT('',(-3.909966184753,1.268305081209, + 0.589391715717)); +#140080 = CARTESIAN_POINT('',(-3.843000679278,1.365933383556, + 0.644256629809)); +#140081 = CARTESIAN_POINT('',(-3.762167814318,1.45789211663, + 0.708414083023)); +#140082 = CARTESIAN_POINT('',(-3.667231843249,1.541884477515, + 0.780985272123)); +#140083 = CARTESIAN_POINT('',(-3.559163911187,1.615265452735, + 0.860076523885)); +#140084 = CARTESIAN_POINT('',(-3.44019475247,1.674946956069, + 0.943037977613)); +#140085 = CARTESIAN_POINT('',(-3.312189841644,1.718634514435, + 1.027657237634)); +#140086 = CARTESIAN_POINT('',(-3.183652940174,1.744185833227, + 1.108058275261)); +#140087 = CARTESIAN_POINT('',(-3.096187948523,1.749982295863, + 1.159813487607)); +#140088 = CARTESIAN_POINT('',(-3.052148090245,1.75,1.185133948138)); +#140089 = ORIENTED_EDGE('',*,*,#140090,.F.); +#140090 = EDGE_CURVE('',#140091,#140070,#140093,.T.); +#140091 = VERTEX_POINT('',#140092); +#140092 = CARTESIAN_POINT('',(-2.176872874149,1.75,1.6)); +#140093 = CIRCLE('',#140094,6.123469387755); +#140094 = AXIS2_PLACEMENT_3D('',#140095,#140096,#140097); +#140095 = CARTESIAN_POINT('',(0.,1.75,-4.123469387755)); +#140096 = DIRECTION('',(0.,-1.,0.)); +#140097 = DIRECTION('',(-0.355496653335,0.,0.934677553741)); +#140098 = ORIENTED_EDGE('',*,*,#140099,.F.); +#140099 = EDGE_CURVE('',#140005,#140091,#140100,.T.); +#140100 = LINE('',#140101,#140102); +#140101 = CARTESIAN_POINT('',(-2.176872874149,2.5,1.6)); +#140102 = VECTOR('',#140103,1.); +#140103 = DIRECTION('',(0.,-1.,0.)); +#140104 = CYLINDRICAL_SURFACE('',#140105,6.123469387755); +#140105 = AXIS2_PLACEMENT_3D('',#140106,#140107,#140108); +#140106 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#140107 = DIRECTION('',(0.,-1.,0.)); +#140108 = DIRECTION('',(1.,0.,0.)); +#140109 = ADVANCED_FACE('',(#140110),#140126,.T.); +#140110 = FACE_BOUND('',#140111,.T.); +#140111 = EDGE_LOOP('',(#140112,#140113,#140119,#140120)); +#140112 = ORIENTED_EDGE('',*,*,#140099,.T.); +#140113 = ORIENTED_EDGE('',*,*,#140114,.T.); +#140114 = EDGE_CURVE('',#140091,#139889,#140115,.T.); +#140115 = LINE('',#140116,#140117); +#140116 = CARTESIAN_POINT('',(-2.176872874149,1.75,1.6)); +#140117 = VECTOR('',#140118,1.); +#140118 = DIRECTION('',(1.,0.,0.)); +#140119 = ORIENTED_EDGE('',*,*,#139990,.F.); +#140120 = ORIENTED_EDGE('',*,*,#140121,.F.); +#140121 = EDGE_CURVE('',#140005,#139982,#140122,.T.); +#140122 = LINE('',#140123,#140124); +#140123 = CARTESIAN_POINT('',(-2.176872874149,2.5,1.6)); +#140124 = VECTOR('',#140125,1.); +#140125 = DIRECTION('',(1.,0.,0.)); +#140126 = PLANE('',#140127); +#140127 = AXIS2_PLACEMENT_3D('',#140128,#140129,#140130); +#140128 = CARTESIAN_POINT('',(0.,0.,1.6)); +#140129 = DIRECTION('',(0.,0.,1.)); +#140130 = DIRECTION('',(1.,0.,-0.)); +#140131 = ADVANCED_FACE('',(#140132),#140148,.T.); +#140132 = FACE_BOUND('',#140133,.T.); +#140133 = EDGE_LOOP('',(#140134,#140135,#140141,#140142)); +#140134 = ORIENTED_EDGE('',*,*,#139956,.F.); +#140135 = ORIENTED_EDGE('',*,*,#140136,.T.); +#140136 = EDGE_CURVE('',#139948,#140024,#140137,.T.); +#140137 = LINE('',#140138,#140139); +#140138 = CARTESIAN_POINT('',(2.176872874149,-1.75,1.6)); +#140139 = VECTOR('',#140140,1.); +#140140 = DIRECTION('',(-1.,0.,0.)); +#140141 = ORIENTED_EDGE('',*,*,#140023,.T.); +#140142 = ORIENTED_EDGE('',*,*,#140143,.T.); +#140143 = EDGE_CURVE('',#140015,#139957,#140144,.T.); +#140144 = LINE('',#140145,#140146); +#140145 = CARTESIAN_POINT('',(-2.176872874149,-2.5,1.6)); +#140146 = VECTOR('',#140147,1.); +#140147 = DIRECTION('',(1.,0.,0.)); +#140148 = PLANE('',#140149); +#140149 = AXIS2_PLACEMENT_3D('',#140150,#140151,#140152); +#140150 = CARTESIAN_POINT('',(0.,0.,1.6)); +#140151 = DIRECTION('',(0.,0.,1.)); +#140152 = DIRECTION('',(1.,0.,-0.)); +#140153 = ADVANCED_FACE('',(#140154),#140182,.F.); +#140154 = FACE_BOUND('',#140155,.T.); +#140155 = EDGE_LOOP('',(#140156,#140157,#140165,#140174,#140180,#140181) + ); +#140156 = ORIENTED_EDGE('',*,*,#139981,.F.); +#140157 = ORIENTED_EDGE('',*,*,#140158,.F.); +#140158 = EDGE_CURVE('',#140159,#139974,#140161,.T.); +#140159 = VERTEX_POINT('',#140160); +#140160 = CARTESIAN_POINT('',(4.975244840658,2.5,-2.9)); +#140161 = LINE('',#140162,#140163); +#140162 = CARTESIAN_POINT('',(4.975244840658,2.5,-2.9)); +#140163 = VECTOR('',#140164,1.); +#140164 = DIRECTION('',(1.,0.,0.)); +#140165 = ORIENTED_EDGE('',*,*,#140166,.F.); +#140166 = EDGE_CURVE('',#140167,#140159,#140169,.T.); +#140167 = VERTEX_POINT('',#140168); +#140168 = CARTESIAN_POINT('',(-4.975244840658,2.5,-2.9)); +#140169 = CIRCLE('',#140170,5.123469387755); +#140170 = AXIS2_PLACEMENT_3D('',#140171,#140172,#140173); +#140171 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#140172 = DIRECTION('',(0.,1.,0.)); +#140173 = DIRECTION('',(-0.971069496882,0.,0.23879705238)); +#140174 = ORIENTED_EDGE('',*,*,#140175,.F.); +#140175 = EDGE_CURVE('',#139775,#140167,#140176,.T.); +#140176 = LINE('',#140177,#140178); +#140177 = CARTESIAN_POINT('',(-6.,2.5,-2.9)); +#140178 = VECTOR('',#140179,1.); +#140179 = DIRECTION('',(1.,0.,0.)); +#140180 = ORIENTED_EDGE('',*,*,#140004,.F.); +#140181 = ORIENTED_EDGE('',*,*,#140121,.T.); +#140182 = PLANE('',#140183); +#140183 = AXIS2_PLACEMENT_3D('',#140184,#140185,#140186); +#140184 = CARTESIAN_POINT('',(0.,2.5,0.)); +#140185 = DIRECTION('',(0.,-1.,0.)); +#140186 = DIRECTION('',(0.,0.,-1.)); +#140187 = ADVANCED_FACE('',(#140188,#140243),#140309,.T.); +#140188 = FACE_BOUND('',#140189,.T.); +#140189 = EDGE_LOOP('',(#140190,#140198,#140204,#140205,#140213,#140219, + #140227,#140233,#140234,#140240,#140241,#140242)); +#140190 = ORIENTED_EDGE('',*,*,#140191,.T.); +#140191 = EDGE_CURVE('',#140167,#140192,#140194,.T.); +#140192 = VERTEX_POINT('',#140193); +#140193 = CARTESIAN_POINT('',(-4.975244840658,-2.5,-2.9)); +#140194 = LINE('',#140195,#140196); +#140195 = CARTESIAN_POINT('',(-4.975244840658,2.5,-2.9)); +#140196 = VECTOR('',#140197,1.); +#140197 = DIRECTION('',(0.,-1.,0.)); +#140198 = ORIENTED_EDGE('',*,*,#140199,.F.); +#140199 = EDGE_CURVE('',#139865,#140192,#140200,.T.); +#140200 = LINE('',#140201,#140202); +#140201 = CARTESIAN_POINT('',(-6.,-2.5,-2.9)); +#140202 = VECTOR('',#140203,1.); +#140203 = DIRECTION('',(1.,0.,0.)); +#140204 = ORIENTED_EDGE('',*,*,#139864,.T.); +#140205 = ORIENTED_EDGE('',*,*,#140206,.T.); +#140206 = EDGE_CURVE('',#139857,#140207,#140209,.T.); +#140207 = VERTEX_POINT('',#140208); +#140208 = CARTESIAN_POINT('',(6.,-6.,-2.9)); +#140209 = LINE('',#140210,#140211); +#140210 = CARTESIAN_POINT('',(-6.,-6.,-2.9)); +#140211 = VECTOR('',#140212,1.); +#140212 = DIRECTION('',(1.,0.,0.)); +#140213 = ORIENTED_EDGE('',*,*,#140214,.T.); +#140214 = EDGE_CURVE('',#140207,#139965,#140215,.T.); +#140215 = LINE('',#140216,#140217); +#140216 = CARTESIAN_POINT('',(6.,-6.,-2.9)); +#140217 = VECTOR('',#140218,1.); +#140218 = DIRECTION('',(0.,1.,0.)); +#140219 = ORIENTED_EDGE('',*,*,#140220,.F.); +#140220 = EDGE_CURVE('',#140221,#139965,#140223,.T.); +#140221 = VERTEX_POINT('',#140222); +#140222 = CARTESIAN_POINT('',(4.975244840658,-2.5,-2.9)); +#140223 = LINE('',#140224,#140225); +#140224 = CARTESIAN_POINT('',(4.975244840658,-2.5,-2.9)); +#140225 = VECTOR('',#140226,1.); +#140226 = DIRECTION('',(1.,0.,0.)); +#140227 = ORIENTED_EDGE('',*,*,#140228,.F.); +#140228 = EDGE_CURVE('',#140159,#140221,#140229,.T.); +#140229 = LINE('',#140230,#140231); +#140230 = CARTESIAN_POINT('',(4.975244840658,2.5,-2.9)); +#140231 = VECTOR('',#140232,1.); +#140232 = DIRECTION('',(0.,-1.,0.)); +#140233 = ORIENTED_EDGE('',*,*,#140158,.T.); +#140234 = ORIENTED_EDGE('',*,*,#140235,.T.); +#140235 = EDGE_CURVE('',#139974,#139229,#140236,.T.); +#140236 = LINE('',#140237,#140238); +#140237 = CARTESIAN_POINT('',(6.,2.5,-2.9)); +#140238 = VECTOR('',#140239,1.); +#140239 = DIRECTION('',(0.,1.,0.)); +#140240 = ORIENTED_EDGE('',*,*,#139228,.T.); +#140241 = ORIENTED_EDGE('',*,*,#139774,.T.); +#140242 = ORIENTED_EDGE('',*,*,#140175,.T.); +#140243 = FACE_BOUND('',#140244,.T.); +#140244 = EDGE_LOOP('',(#140245,#140255,#140263,#140271,#140279,#140287, + #140295,#140303)); +#140245 = ORIENTED_EDGE('',*,*,#140246,.T.); +#140246 = EDGE_CURVE('',#140247,#140249,#140251,.T.); +#140247 = VERTEX_POINT('',#140248); +#140248 = CARTESIAN_POINT('',(2.2207,-2.59265,-2.9)); +#140249 = VERTEX_POINT('',#140250); +#140250 = CARTESIAN_POINT('',(1.2207,-3.59265,-2.9)); +#140251 = LINE('',#140252,#140253); +#140252 = CARTESIAN_POINT('',(2.2207,-2.59265,-2.9)); +#140253 = VECTOR('',#140254,1.); +#140254 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#140255 = ORIENTED_EDGE('',*,*,#140256,.F.); +#140256 = EDGE_CURVE('',#140257,#140249,#140259,.T.); +#140257 = VERTEX_POINT('',#140258); +#140258 = CARTESIAN_POINT('',(-1.2207,-3.59265,-2.9)); +#140259 = LINE('',#140260,#140261); +#140260 = CARTESIAN_POINT('',(-1.2207,-3.59265,-2.9)); +#140261 = VECTOR('',#140262,1.); +#140262 = DIRECTION('',(1.,0.,0.)); +#140263 = ORIENTED_EDGE('',*,*,#140264,.T.); +#140264 = EDGE_CURVE('',#140257,#140265,#140267,.T.); +#140265 = VERTEX_POINT('',#140266); +#140266 = CARTESIAN_POINT('',(-2.2207,-2.59265,-2.9)); +#140267 = LINE('',#140268,#140269); +#140268 = CARTESIAN_POINT('',(-1.2207,-3.59265,-2.9)); +#140269 = VECTOR('',#140270,1.); +#140270 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140271 = ORIENTED_EDGE('',*,*,#140272,.F.); +#140272 = EDGE_CURVE('',#140273,#140265,#140275,.T.); +#140273 = VERTEX_POINT('',#140274); +#140274 = CARTESIAN_POINT('',(-2.2207,2.59265,-2.9)); +#140275 = LINE('',#140276,#140277); +#140276 = CARTESIAN_POINT('',(-2.2207,2.59265,-2.9)); +#140277 = VECTOR('',#140278,1.); +#140278 = DIRECTION('',(0.,-1.,0.)); +#140279 = ORIENTED_EDGE('',*,*,#140280,.T.); +#140280 = EDGE_CURVE('',#140273,#140281,#140283,.T.); +#140281 = VERTEX_POINT('',#140282); +#140282 = CARTESIAN_POINT('',(-1.2207,3.59265,-2.9)); +#140283 = LINE('',#140284,#140285); +#140284 = CARTESIAN_POINT('',(-2.2207,2.59265,-2.9)); +#140285 = VECTOR('',#140286,1.); +#140286 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140287 = ORIENTED_EDGE('',*,*,#140288,.F.); +#140288 = EDGE_CURVE('',#140289,#140281,#140291,.T.); +#140289 = VERTEX_POINT('',#140290); +#140290 = CARTESIAN_POINT('',(1.2207,3.59265,-2.9)); +#140291 = LINE('',#140292,#140293); +#140292 = CARTESIAN_POINT('',(1.2207,3.59265,-2.9)); +#140293 = VECTOR('',#140294,1.); +#140294 = DIRECTION('',(-1.,0.,0.)); +#140295 = ORIENTED_EDGE('',*,*,#140296,.T.); +#140296 = EDGE_CURVE('',#140289,#140297,#140299,.T.); +#140297 = VERTEX_POINT('',#140298); +#140298 = CARTESIAN_POINT('',(2.2207,2.59265,-2.9)); +#140299 = LINE('',#140300,#140301); +#140300 = CARTESIAN_POINT('',(1.2207,3.59265,-2.9)); +#140301 = VECTOR('',#140302,1.); +#140302 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140303 = ORIENTED_EDGE('',*,*,#140304,.F.); +#140304 = EDGE_CURVE('',#140247,#140297,#140305,.T.); +#140305 = LINE('',#140306,#140307); +#140306 = CARTESIAN_POINT('',(2.2207,-2.59265,-2.9)); +#140307 = VECTOR('',#140308,1.); +#140308 = DIRECTION('',(0.,1.,0.)); +#140309 = PLANE('',#140310); +#140310 = AXIS2_PLACEMENT_3D('',#140311,#140312,#140313); +#140311 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140312 = DIRECTION('',(0.,0.,1.)); +#140313 = DIRECTION('',(1.,0.,-0.)); +#140314 = ADVANCED_FACE('',(#140315),#140340,.F.); +#140315 = FACE_BOUND('',#140316,.T.); +#140316 = EDGE_LOOP('',(#140317,#140327,#140333,#140334)); +#140317 = ORIENTED_EDGE('',*,*,#140318,.F.); +#140318 = EDGE_CURVE('',#140319,#140321,#140323,.T.); +#140319 = VERTEX_POINT('',#140320); +#140320 = CARTESIAN_POINT('',(2.2207,-2.59265,-3.9)); +#140321 = VERTEX_POINT('',#140322); +#140322 = CARTESIAN_POINT('',(2.2207,2.59265,-3.9)); +#140323 = LINE('',#140324,#140325); +#140324 = CARTESIAN_POINT('',(2.2207,-2.59265,-3.9)); +#140325 = VECTOR('',#140326,1.); +#140326 = DIRECTION('',(0.,1.,0.)); +#140327 = ORIENTED_EDGE('',*,*,#140328,.F.); +#140328 = EDGE_CURVE('',#140247,#140319,#140329,.T.); +#140329 = LINE('',#140330,#140331); +#140330 = CARTESIAN_POINT('',(2.2207,-2.59265,-2.9)); +#140331 = VECTOR('',#140332,1.); +#140332 = DIRECTION('',(0.,0.,-1.)); +#140333 = ORIENTED_EDGE('',*,*,#140304,.T.); +#140334 = ORIENTED_EDGE('',*,*,#140335,.T.); +#140335 = EDGE_CURVE('',#140297,#140321,#140336,.T.); +#140336 = LINE('',#140337,#140338); +#140337 = CARTESIAN_POINT('',(2.2207,2.59265,-2.9)); +#140338 = VECTOR('',#140339,1.); +#140339 = DIRECTION('',(0.,0.,-1.)); +#140340 = PLANE('',#140341); +#140341 = AXIS2_PLACEMENT_3D('',#140342,#140343,#140344); +#140342 = CARTESIAN_POINT('',(2.2207,-3.59265,-2.9)); +#140343 = DIRECTION('',(1.,0.,0.)); +#140344 = DIRECTION('',(-0.,1.,0.)); +#140345 = ADVANCED_FACE('',(#140346),#140364,.T.); +#140346 = FACE_BOUND('',#140347,.T.); +#140347 = EDGE_LOOP('',(#140348,#140349,#140350,#140358)); +#140348 = ORIENTED_EDGE('',*,*,#140335,.F.); +#140349 = ORIENTED_EDGE('',*,*,#140296,.F.); +#140350 = ORIENTED_EDGE('',*,*,#140351,.T.); +#140351 = EDGE_CURVE('',#140289,#140352,#140354,.T.); +#140352 = VERTEX_POINT('',#140353); +#140353 = CARTESIAN_POINT('',(1.2207,3.59265,-3.9)); +#140354 = LINE('',#140355,#140356); +#140355 = CARTESIAN_POINT('',(1.2207,3.59265,-2.9)); +#140356 = VECTOR('',#140357,1.); +#140357 = DIRECTION('',(0.,0.,-1.)); +#140358 = ORIENTED_EDGE('',*,*,#140359,.F.); +#140359 = EDGE_CURVE('',#140321,#140352,#140360,.T.); +#140360 = LINE('',#140361,#140362); +#140361 = CARTESIAN_POINT('',(2.2207,2.59265,-3.9)); +#140362 = VECTOR('',#140363,1.); +#140363 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140364 = PLANE('',#140365); +#140365 = AXIS2_PLACEMENT_3D('',#140366,#140367,#140368); +#140366 = CARTESIAN_POINT('',(1.7207,3.09265,-3.4)); +#140367 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#140368 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140369 = ADVANCED_FACE('',(#140370,#140420),#140430,.T.); +#140370 = FACE_BOUND('',#140371,.T.); +#140371 = EDGE_LOOP('',(#140372,#140382,#140390,#140398,#140404,#140405, + #140406,#140414)); +#140372 = ORIENTED_EDGE('',*,*,#140373,.T.); +#140373 = EDGE_CURVE('',#140374,#140376,#140378,.T.); +#140374 = VERTEX_POINT('',#140375); +#140375 = CARTESIAN_POINT('',(-2.2207,2.59265,-3.9)); +#140376 = VERTEX_POINT('',#140377); +#140377 = CARTESIAN_POINT('',(-2.2207,-2.59265,-3.9)); +#140378 = LINE('',#140379,#140380); +#140379 = CARTESIAN_POINT('',(-2.2207,2.59265,-3.9)); +#140380 = VECTOR('',#140381,1.); +#140381 = DIRECTION('',(0.,-1.,0.)); +#140382 = ORIENTED_EDGE('',*,*,#140383,.T.); +#140383 = EDGE_CURVE('',#140376,#140384,#140386,.T.); +#140384 = VERTEX_POINT('',#140385); +#140385 = CARTESIAN_POINT('',(-1.2207,-3.59265,-3.9)); +#140386 = LINE('',#140387,#140388); +#140387 = CARTESIAN_POINT('',(-2.2207,-2.59265,-3.9)); +#140388 = VECTOR('',#140389,1.); +#140389 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140390 = ORIENTED_EDGE('',*,*,#140391,.T.); +#140391 = EDGE_CURVE('',#140384,#140392,#140394,.T.); +#140392 = VERTEX_POINT('',#140393); +#140393 = CARTESIAN_POINT('',(1.2207,-3.59265,-3.9)); +#140394 = LINE('',#140395,#140396); +#140395 = CARTESIAN_POINT('',(-1.2207,-3.59265,-3.9)); +#140396 = VECTOR('',#140397,1.); +#140397 = DIRECTION('',(1.,0.,0.)); +#140398 = ORIENTED_EDGE('',*,*,#140399,.T.); +#140399 = EDGE_CURVE('',#140392,#140319,#140400,.T.); +#140400 = LINE('',#140401,#140402); +#140401 = CARTESIAN_POINT('',(1.2207,-3.59265,-3.9)); +#140402 = VECTOR('',#140403,1.); +#140403 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140404 = ORIENTED_EDGE('',*,*,#140318,.T.); +#140405 = ORIENTED_EDGE('',*,*,#140359,.T.); +#140406 = ORIENTED_EDGE('',*,*,#140407,.T.); +#140407 = EDGE_CURVE('',#140352,#140408,#140410,.T.); +#140408 = VERTEX_POINT('',#140409); +#140409 = CARTESIAN_POINT('',(-1.2207,3.59265,-3.9)); +#140410 = LINE('',#140411,#140412); +#140411 = CARTESIAN_POINT('',(1.2207,3.59265,-3.9)); +#140412 = VECTOR('',#140413,1.); +#140413 = DIRECTION('',(-1.,0.,0.)); +#140414 = ORIENTED_EDGE('',*,*,#140415,.T.); +#140415 = EDGE_CURVE('',#140408,#140374,#140416,.T.); +#140416 = LINE('',#140417,#140418); +#140417 = CARTESIAN_POINT('',(-1.2207,3.59265,-3.9)); +#140418 = VECTOR('',#140419,1.); +#140419 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#140420 = FACE_BOUND('',#140421,.T.); +#140421 = EDGE_LOOP('',(#140422,#140429)); +#140422 = ORIENTED_EDGE('',*,*,#140423,.F.); +#140423 = EDGE_CURVE('',#136375,#136444,#140424,.T.); +#140424 = CIRCLE('',#140425,2.); +#140425 = AXIS2_PLACEMENT_3D('',#140426,#140427,#140428); +#140426 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#140427 = DIRECTION('',(0.,0.,1.)); +#140428 = DIRECTION('',(-1.,0.,0.)); +#140429 = ORIENTED_EDGE('',*,*,#136451,.F.); +#140430 = PLANE('',#140431); +#140431 = AXIS2_PLACEMENT_3D('',#140432,#140433,#140434); +#140432 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#140433 = DIRECTION('',(0.,0.,1.)); +#140434 = DIRECTION('',(1.,0.,-0.)); +#140435 = ADVANCED_FACE('',(#140436),#140452,.T.); +#140436 = FACE_BOUND('',#140437,.T.); +#140437 = EDGE_LOOP('',(#140438,#140444,#140445,#140451)); +#140438 = ORIENTED_EDGE('',*,*,#140439,.F.); +#140439 = EDGE_CURVE('',#140281,#140408,#140440,.T.); +#140440 = LINE('',#140441,#140442); +#140441 = CARTESIAN_POINT('',(-1.2207,3.59265,-2.9)); +#140442 = VECTOR('',#140443,1.); +#140443 = DIRECTION('',(0.,0.,-1.)); +#140444 = ORIENTED_EDGE('',*,*,#140280,.F.); +#140445 = ORIENTED_EDGE('',*,*,#140446,.T.); +#140446 = EDGE_CURVE('',#140273,#140374,#140447,.T.); +#140447 = LINE('',#140448,#140449); +#140448 = CARTESIAN_POINT('',(-2.2207,2.59265,-2.9)); +#140449 = VECTOR('',#140450,1.); +#140450 = DIRECTION('',(0.,0.,-1.)); +#140451 = ORIENTED_EDGE('',*,*,#140415,.F.); +#140452 = PLANE('',#140453); +#140453 = AXIS2_PLACEMENT_3D('',#140454,#140455,#140456); +#140454 = CARTESIAN_POINT('',(-1.7207,3.09265,-3.4)); +#140455 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#140456 = DIRECTION('',(0.,0.,-1.)); +#140457 = ADVANCED_FACE('',(#140458),#140469,.F.); +#140458 = FACE_BOUND('',#140459,.T.); +#140459 = EDGE_LOOP('',(#140460,#140461,#140467,#140468)); +#140460 = ORIENTED_EDGE('',*,*,#140272,.T.); +#140461 = ORIENTED_EDGE('',*,*,#140462,.T.); +#140462 = EDGE_CURVE('',#140265,#140376,#140463,.T.); +#140463 = LINE('',#140464,#140465); +#140464 = CARTESIAN_POINT('',(-2.2207,-2.59265,-2.9)); +#140465 = VECTOR('',#140466,1.); +#140466 = DIRECTION('',(0.,0.,-1.)); +#140467 = ORIENTED_EDGE('',*,*,#140373,.F.); +#140468 = ORIENTED_EDGE('',*,*,#140446,.F.); +#140469 = PLANE('',#140470); +#140470 = AXIS2_PLACEMENT_3D('',#140471,#140472,#140473); +#140471 = CARTESIAN_POINT('',(-2.2207,3.59265,-2.9)); +#140472 = DIRECTION('',(-1.,0.,0.)); +#140473 = DIRECTION('',(0.,0.,1.)); +#140474 = ADVANCED_FACE('',(#140475),#140486,.T.); +#140475 = FACE_BOUND('',#140476,.T.); +#140476 = EDGE_LOOP('',(#140477,#140478,#140479,#140485)); +#140477 = ORIENTED_EDGE('',*,*,#140462,.F.); +#140478 = ORIENTED_EDGE('',*,*,#140264,.F.); +#140479 = ORIENTED_EDGE('',*,*,#140480,.T.); +#140480 = EDGE_CURVE('',#140257,#140384,#140481,.T.); +#140481 = LINE('',#140482,#140483); +#140482 = CARTESIAN_POINT('',(-1.2207,-3.59265,-2.9)); +#140483 = VECTOR('',#140484,1.); +#140484 = DIRECTION('',(0.,0.,-1.)); +#140485 = ORIENTED_EDGE('',*,*,#140383,.F.); +#140486 = PLANE('',#140487); +#140487 = AXIS2_PLACEMENT_3D('',#140488,#140489,#140490); +#140488 = CARTESIAN_POINT('',(-1.7207,-3.09265,-3.4)); +#140489 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#140490 = DIRECTION('',(0.,0.,-1.)); +#140491 = ADVANCED_FACE('',(#140492),#140503,.F.); +#140492 = FACE_BOUND('',#140493,.T.); +#140493 = EDGE_LOOP('',(#140494,#140495,#140501,#140502)); +#140494 = ORIENTED_EDGE('',*,*,#140256,.T.); +#140495 = ORIENTED_EDGE('',*,*,#140496,.T.); +#140496 = EDGE_CURVE('',#140249,#140392,#140497,.T.); +#140497 = LINE('',#140498,#140499); +#140498 = CARTESIAN_POINT('',(1.2207,-3.59265,-2.9)); +#140499 = VECTOR('',#140500,1.); +#140500 = DIRECTION('',(0.,0.,-1.)); +#140501 = ORIENTED_EDGE('',*,*,#140391,.F.); +#140502 = ORIENTED_EDGE('',*,*,#140480,.F.); +#140503 = PLANE('',#140504); +#140504 = AXIS2_PLACEMENT_3D('',#140505,#140506,#140507); +#140505 = CARTESIAN_POINT('',(-2.2207,-3.59265,-2.9)); +#140506 = DIRECTION('',(0.,-1.,0.)); +#140507 = DIRECTION('',(0.,0.,-1.)); +#140508 = ADVANCED_FACE('',(#140509),#140515,.T.); +#140509 = FACE_BOUND('',#140510,.T.); +#140510 = EDGE_LOOP('',(#140511,#140512,#140513,#140514)); +#140511 = ORIENTED_EDGE('',*,*,#140496,.F.); +#140512 = ORIENTED_EDGE('',*,*,#140246,.F.); +#140513 = ORIENTED_EDGE('',*,*,#140328,.T.); +#140514 = ORIENTED_EDGE('',*,*,#140399,.F.); +#140515 = PLANE('',#140516); +#140516 = AXIS2_PLACEMENT_3D('',#140517,#140518,#140519); +#140517 = CARTESIAN_POINT('',(1.7207,-3.09265,-3.4)); +#140518 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#140519 = DIRECTION('',(0.,0.,1.)); +#140520 = ADVANCED_FACE('',(#140521),#140527,.F.); +#140521 = FACE_BOUND('',#140522,.T.); +#140522 = EDGE_LOOP('',(#140523,#140524,#140525,#140526)); +#140523 = ORIENTED_EDGE('',*,*,#140407,.F.); +#140524 = ORIENTED_EDGE('',*,*,#140351,.F.); +#140525 = ORIENTED_EDGE('',*,*,#140288,.T.); +#140526 = ORIENTED_EDGE('',*,*,#140439,.T.); +#140527 = PLANE('',#140528); +#140528 = AXIS2_PLACEMENT_3D('',#140529,#140530,#140531); +#140529 = CARTESIAN_POINT('',(2.2207,3.59265,-2.9)); +#140530 = DIRECTION('',(-0.,1.,0.)); +#140531 = DIRECTION('',(1.,0.,0.)); +#140532 = ADVANCED_FACE('',(#140533),#140560,.T.); +#140533 = FACE_BOUND('',#140534,.T.); +#140534 = EDGE_LOOP('',(#140535,#140536,#140545,#140553)); +#140535 = ORIENTED_EDGE('',*,*,#136384,.F.); +#140536 = ORIENTED_EDGE('',*,*,#140537,.T.); +#140537 = EDGE_CURVE('',#136377,#140538,#140540,.T.); +#140538 = VERTEX_POINT('',#140539); +#140539 = CARTESIAN_POINT('',(-1.322875655532,-1.5,-2.9)); +#140540 = CIRCLE('',#140541,2.); +#140541 = AXIS2_PLACEMENT_3D('',#140542,#140543,#140544); +#140542 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140543 = DIRECTION('',(0.,0.,1.)); +#140544 = DIRECTION('',(-1.,0.,0.)); +#140545 = ORIENTED_EDGE('',*,*,#140546,.T.); +#140546 = EDGE_CURVE('',#140538,#140547,#140549,.T.); +#140547 = VERTEX_POINT('',#140548); +#140548 = CARTESIAN_POINT('',(-1.322875655507,-1.49999999993, + 7.450000000257)); +#140549 = LINE('',#140550,#140551); +#140550 = CARTESIAN_POINT('',(-1.322875655532,-1.5,-2.9)); +#140551 = VECTOR('',#140552,1.); +#140552 = DIRECTION('',(2.432364561987E-12,6.73910739327E-12,1.)); +#140553 = ORIENTED_EDGE('',*,*,#140554,.F.); +#140554 = EDGE_CURVE('',#136385,#140547,#140555,.T.); +#140555 = CIRCLE('',#140556,2.); +#140556 = AXIS2_PLACEMENT_3D('',#140557,#140558,#140559); +#140557 = CARTESIAN_POINT('',(0.,0.,7.45)); +#140558 = DIRECTION('',(0.,0.,1.)); +#140559 = DIRECTION('',(-0.661437827766,0.75,0.)); +#140560 = CYLINDRICAL_SURFACE('',#140561,2.); +#140561 = AXIS2_PLACEMENT_3D('',#140562,#140563,#140564); +#140562 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#140563 = DIRECTION('',(0.,0.,1.)); +#140564 = DIRECTION('',(1.,0.,-0.)); +#140565 = ADVANCED_FACE('',(#140566),#140597,.T.); +#140566 = FACE_BOUND('',#140567,.T.); +#140567 = EDGE_LOOP('',(#140568,#140578,#140587,#140595,#140596)); +#140568 = ORIENTED_EDGE('',*,*,#140569,.F.); +#140569 = EDGE_CURVE('',#140570,#136419,#140572,.T.); +#140570 = VERTEX_POINT('',#140571); +#140571 = CARTESIAN_POINT('',(1.239209686072,1.285640646055,8.25)); +#140572 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140573,#140574,#140575, + #140576,#140577),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#140573 = CARTESIAN_POINT('',(1.239209686072,1.285640646055,8.25)); +#140574 = CARTESIAN_POINT('',(1.252854467749,1.319458137292, + 8.12379140452)); +#140575 = CARTESIAN_POINT('',(1.280463091002,1.389001652113, + 7.864251473871)); +#140576 = CARTESIAN_POINT('',(1.308650539899,1.462363881662, + 7.590459905837)); +#140577 = CARTESIAN_POINT('',(1.322875655532,1.5,7.45)); +#140578 = ORIENTED_EDGE('',*,*,#140579,.F.); +#140579 = EDGE_CURVE('',#140580,#140570,#140582,.T.); +#140580 = VERTEX_POINT('',#140581); +#140581 = CARTESIAN_POINT('',(1.239209686072,-1.285640646055,8.25)); +#140582 = CIRCLE('',#140583,1.785640646055); +#140583 = AXIS2_PLACEMENT_3D('',#140584,#140585,#140586); +#140584 = CARTESIAN_POINT('',(0.,0.,8.25)); +#140585 = DIRECTION('',(0.,0.,1.)); +#140586 = DIRECTION('',(0.693986042942,-0.719988452825,0.)); +#140587 = ORIENTED_EDGE('',*,*,#140588,.F.); +#140588 = EDGE_CURVE('',#136477,#140580,#140589,.T.); +#140589 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140590,#140591,#140592, + #140593,#140594),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#140590 = CARTESIAN_POINT('',(1.322875583574,-1.49999980066, + 7.450000735593)); +#140591 = CARTESIAN_POINT('',(1.308643254457,-1.462344606108, + 7.59053183483)); +#140592 = CARTESIAN_POINT('',(1.280448242125,-1.388963610741, + 7.864393450383)); +#140593 = CARTESIAN_POINT('',(1.252846775881,-1.319439073617, + 8.123862551121)); +#140594 = CARTESIAN_POINT('',(1.239209686072,-1.285640646055,8.25)); +#140595 = ORIENTED_EDGE('',*,*,#136476,.T.); +#140596 = ORIENTED_EDGE('',*,*,#136426,.T.); +#140597 = CONICAL_SURFACE('',#140598,1.892820360988,0.261799387799); +#140598 = AXIS2_PLACEMENT_3D('',#140599,#140600,#140601); +#140599 = CARTESIAN_POINT('',(0.,0.,7.84999985833)); +#140600 = DIRECTION('',(0.,0.,-1.)); +#140601 = DIRECTION('',(0.,-1.,0.)); +#140602 = ADVANCED_FACE('',(#140603),#140628,.T.); +#140603 = FACE_BOUND('',#140604,.T.); +#140604 = EDGE_LOOP('',(#140605,#140606,#140614,#140622)); +#140605 = ORIENTED_EDGE('',*,*,#140588,.T.); +#140606 = ORIENTED_EDGE('',*,*,#140607,.F.); +#140607 = EDGE_CURVE('',#140608,#140580,#140610,.T.); +#140608 = VERTEX_POINT('',#140609); +#140609 = CARTESIAN_POINT('',(-1.239209686072,-1.285640646055,8.25)); +#140610 = LINE('',#140611,#140612); +#140611 = CARTESIAN_POINT('',(-1.239209686072,-1.285640646055,8.25)); +#140612 = VECTOR('',#140613,1.); +#140613 = DIRECTION('',(1.,0.,0.)); +#140614 = ORIENTED_EDGE('',*,*,#140615,.T.); +#140615 = EDGE_CURVE('',#140608,#140547,#140616,.T.); +#140616 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140617,#140618,#140619, + #140620,#140621),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#140617 = CARTESIAN_POINT('',(-1.239209686072,-1.285640646055,8.25)); +#140618 = CARTESIAN_POINT('',(-1.252838588745,-1.319418782461, + 8.123938278746)); +#140619 = CARTESIAN_POINT('',(-1.280432359249,-1.388922914311, + 7.864545327349)); +#140620 = CARTESIAN_POINT('',(-1.308635655294,-1.4623245007, + 7.590606877586)); +#140621 = CARTESIAN_POINT('',(-1.322875655507,-1.49999999993, + 7.450000000257)); +#140622 = ORIENTED_EDGE('',*,*,#140623,.T.); +#140623 = EDGE_CURVE('',#140547,#136477,#140624,.T.); +#140624 = LINE('',#140625,#140626); +#140625 = CARTESIAN_POINT('',(-1.322875655507,-1.49999999993, + 7.450000000257)); +#140626 = VECTOR('',#140627,1.); +#140627 = DIRECTION('',(1.,7.531718998564E-08,2.779306603592E-07)); +#140628 = PLANE('',#140629); +#140629 = AXIS2_PLACEMENT_3D('',#140630,#140631,#140632); +#140630 = CARTESIAN_POINT('',(1.42108547152E-14,-1.392820323028,7.85)); +#140631 = DIRECTION('',(0.,-0.965925826289,0.258819045102)); +#140632 = DIRECTION('',(-1.,0.,0.)); +#140633 = ADVANCED_FACE('',(#140634),#140677,.T.); +#140634 = FACE_BOUND('',#140635,.T.); +#140635 = EDGE_LOOP('',(#140636,#140637,#140645,#140653,#140661,#140669, + #140675,#140676)); +#140636 = ORIENTED_EDGE('',*,*,#140546,.F.); +#140637 = ORIENTED_EDGE('',*,*,#140638,.T.); +#140638 = EDGE_CURVE('',#140538,#140639,#140641,.T.); +#140639 = VERTEX_POINT('',#140640); +#140640 = CARTESIAN_POINT('',(-0.901387818866,-1.5,-2.9)); +#140641 = LINE('',#140642,#140643); +#140642 = CARTESIAN_POINT('',(-1.322875655532,-1.5,-2.9)); +#140643 = VECTOR('',#140644,1.); +#140644 = DIRECTION('',(1.,0.,0.)); +#140645 = ORIENTED_EDGE('',*,*,#140646,.T.); +#140646 = EDGE_CURVE('',#140639,#140647,#140649,.T.); +#140647 = VERTEX_POINT('',#140648); +#140648 = CARTESIAN_POINT('',(-0.901387818866,-1.5,3.25)); +#140649 = LINE('',#140650,#140651); +#140650 = CARTESIAN_POINT('',(-0.901387818866,-1.5,-2.9)); +#140651 = VECTOR('',#140652,1.); +#140652 = DIRECTION('',(0.,0.,1.)); +#140653 = ORIENTED_EDGE('',*,*,#140654,.T.); +#140654 = EDGE_CURVE('',#140647,#140655,#140657,.T.); +#140655 = VERTEX_POINT('',#140656); +#140656 = CARTESIAN_POINT('',(0.901387818866,-1.5,3.25)); +#140657 = LINE('',#140658,#140659); +#140658 = CARTESIAN_POINT('',(-0.901387818866,-1.5,3.25)); +#140659 = VECTOR('',#140660,1.); +#140660 = DIRECTION('',(1.,0.,0.)); +#140661 = ORIENTED_EDGE('',*,*,#140662,.F.); +#140662 = EDGE_CURVE('',#140663,#140655,#140665,.T.); +#140663 = VERTEX_POINT('',#140664); +#140664 = CARTESIAN_POINT('',(0.901387818866,-1.5,-2.9)); +#140665 = LINE('',#140666,#140667); +#140666 = CARTESIAN_POINT('',(0.901387818866,-1.5,-2.9)); +#140667 = VECTOR('',#140668,1.); +#140668 = DIRECTION('',(0.,0.,1.)); +#140669 = ORIENTED_EDGE('',*,*,#140670,.T.); +#140670 = EDGE_CURVE('',#140663,#136467,#140671,.T.); +#140671 = LINE('',#140672,#140673); +#140672 = CARTESIAN_POINT('',(0.901387818866,-1.5,-2.9)); +#140673 = VECTOR('',#140674,1.); +#140674 = DIRECTION('',(1.,0.,0.)); +#140675 = ORIENTED_EDGE('',*,*,#136485,.T.); +#140676 = ORIENTED_EDGE('',*,*,#140623,.F.); +#140677 = PLANE('',#140678); +#140678 = AXIS2_PLACEMENT_3D('',#140679,#140680,#140681); +#140679 = CARTESIAN_POINT('',(-1.322875655532,-1.5,-2.9)); +#140680 = DIRECTION('',(0.,-1.,0.)); +#140681 = DIRECTION('',(0.,0.,-1.)); +#140682 = ADVANCED_FACE('',(#140683),#140718,.T.); +#140683 = FACE_BOUND('',#140684,.T.); +#140684 = EDGE_LOOP('',(#140685,#140696,#140704,#140711,#140712)); +#140685 = ORIENTED_EDGE('',*,*,#140686,.T.); +#140686 = EDGE_CURVE('',#140687,#140689,#140691,.T.); +#140687 = VERTEX_POINT('',#140688); +#140688 = CARTESIAN_POINT('',(-0.93674969976,0.75,-2.9)); +#140689 = VERTEX_POINT('',#140690); +#140690 = CARTESIAN_POINT('',(-0.93674969976,-0.75,-2.9)); +#140691 = CIRCLE('',#140692,1.2); +#140692 = AXIS2_PLACEMENT_3D('',#140693,#140694,#140695); +#140693 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140694 = DIRECTION('',(0.,0.,1.)); +#140695 = DIRECTION('',(-0.7806247498,0.625,0.)); +#140696 = ORIENTED_EDGE('',*,*,#140697,.F.); +#140697 = EDGE_CURVE('',#140698,#140689,#140700,.T.); +#140698 = VERTEX_POINT('',#140699); +#140699 = CARTESIAN_POINT('',(0.93674969976,-0.75,-2.9)); +#140700 = LINE('',#140701,#140702); +#140701 = CARTESIAN_POINT('',(0.93674969976,-0.75,-2.9)); +#140702 = VECTOR('',#140703,1.); +#140703 = DIRECTION('',(-1.,0.,0.)); +#140704 = ORIENTED_EDGE('',*,*,#140705,.T.); +#140705 = EDGE_CURVE('',#140698,#136352,#140706,.T.); +#140706 = CIRCLE('',#140707,1.2); +#140707 = AXIS2_PLACEMENT_3D('',#140708,#140709,#140710); +#140708 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140709 = DIRECTION('',(0.,0.,1.)); +#140710 = DIRECTION('',(0.7806247498,-0.625,0.)); +#140711 = ORIENTED_EDGE('',*,*,#136359,.T.); +#140712 = ORIENTED_EDGE('',*,*,#140713,.F.); +#140713 = EDGE_CURVE('',#140687,#136333,#140714,.T.); +#140714 = LINE('',#140715,#140716); +#140715 = CARTESIAN_POINT('',(-0.93674969976,0.75,-2.9)); +#140716 = VECTOR('',#140717,1.); +#140717 = DIRECTION('',(1.,0.,0.)); +#140718 = PLANE('',#140719); +#140719 = AXIS2_PLACEMENT_3D('',#140720,#140721,#140722); +#140720 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140721 = DIRECTION('',(0.,0.,1.)); +#140722 = DIRECTION('',(1.,0.,-0.)); +#140723 = ADVANCED_FACE('',(#140724),#140750,.T.); +#140724 = FACE_BOUND('',#140725,.T.); +#140725 = EDGE_LOOP('',(#140726,#140734,#140735,#140743)); +#140726 = ORIENTED_EDGE('',*,*,#140727,.F.); +#140727 = EDGE_CURVE('',#136410,#140728,#140730,.T.); +#140728 = VERTEX_POINT('',#140729); +#140729 = CARTESIAN_POINT('',(0.901387818866,1.5,-2.9)); +#140730 = LINE('',#140731,#140732); +#140731 = CARTESIAN_POINT('',(1.322875655532,1.5,-2.9)); +#140732 = VECTOR('',#140733,1.); +#140733 = DIRECTION('',(-1.,0.,0.)); +#140734 = ORIENTED_EDGE('',*,*,#136409,.T.); +#140735 = ORIENTED_EDGE('',*,*,#140736,.F.); +#140736 = EDGE_CURVE('',#140737,#136402,#140739,.T.); +#140737 = VERTEX_POINT('',#140738); +#140738 = CARTESIAN_POINT('',(-0.901387818866,1.5,-2.9)); +#140739 = LINE('',#140740,#140741); +#140740 = CARTESIAN_POINT('',(-0.901387818866,1.5,-2.9)); +#140741 = VECTOR('',#140742,1.); +#140742 = DIRECTION('',(-1.,0.,0.)); +#140743 = ORIENTED_EDGE('',*,*,#140744,.F.); +#140744 = EDGE_CURVE('',#140728,#140737,#140745,.T.); +#140745 = CIRCLE('',#140746,1.75); +#140746 = AXIS2_PLACEMENT_3D('',#140747,#140748,#140749); +#140747 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140748 = DIRECTION('',(0.,0.,1.)); +#140749 = DIRECTION('',(0.515078753638,0.857142857143,-0.)); +#140750 = PLANE('',#140751); +#140751 = AXIS2_PLACEMENT_3D('',#140752,#140753,#140754); +#140752 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140753 = DIRECTION('',(0.,0.,1.)); +#140754 = DIRECTION('',(1.,0.,-0.)); +#140755 = ADVANCED_FACE('',(#140756),#140774,.T.); +#140756 = FACE_BOUND('',#140757,.T.); +#140757 = EDGE_LOOP('',(#140758,#140759,#140766,#140767)); +#140758 = ORIENTED_EDGE('',*,*,#140638,.F.); +#140759 = ORIENTED_EDGE('',*,*,#140760,.T.); +#140760 = EDGE_CURVE('',#140538,#136467,#140761,.T.); +#140761 = CIRCLE('',#140762,2.); +#140762 = AXIS2_PLACEMENT_3D('',#140763,#140764,#140765); +#140763 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140764 = DIRECTION('',(0.,0.,1.)); +#140765 = DIRECTION('',(-0.661437827766,-0.75,0.)); +#140766 = ORIENTED_EDGE('',*,*,#140670,.F.); +#140767 = ORIENTED_EDGE('',*,*,#140768,.F.); +#140768 = EDGE_CURVE('',#140639,#140663,#140769,.T.); +#140769 = CIRCLE('',#140770,1.75); +#140770 = AXIS2_PLACEMENT_3D('',#140771,#140772,#140773); +#140771 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140772 = DIRECTION('',(0.,0.,1.)); +#140773 = DIRECTION('',(-0.515078753638,-0.857142857143,0.)); +#140774 = PLANE('',#140775); +#140775 = AXIS2_PLACEMENT_3D('',#140776,#140777,#140778); +#140776 = CARTESIAN_POINT('',(0.,0.,-2.9)); +#140777 = DIRECTION('',(0.,0.,1.)); +#140778 = DIRECTION('',(1.,0.,-0.)); +#140779 = ADVANCED_FACE('',(#140780),#140798,.T.); +#140780 = FACE_BOUND('',#140781,.T.); +#140781 = EDGE_LOOP('',(#140782,#140783,#140791,#140797)); +#140782 = ORIENTED_EDGE('',*,*,#136332,.T.); +#140783 = ORIENTED_EDGE('',*,*,#140784,.F.); +#140784 = EDGE_CURVE('',#140785,#136335,#140787,.T.); +#140785 = VERTEX_POINT('',#140786); +#140786 = CARTESIAN_POINT('',(-0.93674969976,0.75,8.25)); +#140787 = LINE('',#140788,#140789); +#140788 = CARTESIAN_POINT('',(-0.93674969976,0.75,8.25)); +#140789 = VECTOR('',#140790,1.); +#140790 = DIRECTION('',(1.,0.,0.)); +#140791 = ORIENTED_EDGE('',*,*,#140792,.F.); +#140792 = EDGE_CURVE('',#140687,#140785,#140793,.T.); +#140793 = LINE('',#140794,#140795); +#140794 = CARTESIAN_POINT('',(-0.93674969976,0.75,-2.9)); +#140795 = VECTOR('',#140796,1.); +#140796 = DIRECTION('',(0.,0.,1.)); +#140797 = ORIENTED_EDGE('',*,*,#140713,.T.); +#140798 = PLANE('',#140799); +#140799 = AXIS2_PLACEMENT_3D('',#140800,#140801,#140802); +#140800 = CARTESIAN_POINT('',(-0.93674969976,0.75,-2.9)); +#140801 = DIRECTION('',(0.,-1.,0.)); +#140802 = DIRECTION('',(0.,0.,-1.)); +#140803 = ADVANCED_FACE('',(#140804),#140823,.F.); +#140804 = FACE_BOUND('',#140805,.F.); +#140805 = EDGE_LOOP('',(#140806,#140807,#140815,#140822)); +#140806 = ORIENTED_EDGE('',*,*,#140686,.T.); +#140807 = ORIENTED_EDGE('',*,*,#140808,.T.); +#140808 = EDGE_CURVE('',#140689,#140809,#140811,.T.); +#140809 = VERTEX_POINT('',#140810); +#140810 = CARTESIAN_POINT('',(-0.93674969976,-0.75,8.25)); +#140811 = LINE('',#140812,#140813); +#140812 = CARTESIAN_POINT('',(-0.93674969976,-0.75,-2.9)); +#140813 = VECTOR('',#140814,1.); +#140814 = DIRECTION('',(0.,0.,1.)); +#140815 = ORIENTED_EDGE('',*,*,#140816,.T.); +#140816 = EDGE_CURVE('',#140809,#140785,#140817,.T.); +#140817 = CIRCLE('',#140818,1.2); +#140818 = AXIS2_PLACEMENT_3D('',#140819,#140820,#140821); +#140819 = CARTESIAN_POINT('',(0.,1.224646799147E-14,8.25)); +#140820 = DIRECTION('',(0.,0.,-1.)); +#140821 = DIRECTION('',(-0.7806247498,-0.625,-0.)); +#140822 = ORIENTED_EDGE('',*,*,#140792,.F.); +#140823 = CYLINDRICAL_SURFACE('',#140824,1.2); +#140824 = AXIS2_PLACEMENT_3D('',#140825,#140826,#140827); +#140825 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140826 = DIRECTION('',(0.,0.,1.)); +#140827 = DIRECTION('',(1.,0.,-0.)); +#140828 = ADVANCED_FACE('',(#140829),#140847,.T.); +#140829 = FACE_BOUND('',#140830,.T.); +#140830 = EDGE_LOOP('',(#140831,#140832,#140840,#140846)); +#140831 = ORIENTED_EDGE('',*,*,#140808,.T.); +#140832 = ORIENTED_EDGE('',*,*,#140833,.F.); +#140833 = EDGE_CURVE('',#140834,#140809,#140836,.T.); +#140834 = VERTEX_POINT('',#140835); +#140835 = CARTESIAN_POINT('',(0.93674969976,-0.75,8.25)); +#140836 = LINE('',#140837,#140838); +#140837 = CARTESIAN_POINT('',(0.93674969976,-0.75,8.25)); +#140838 = VECTOR('',#140839,1.); +#140839 = DIRECTION('',(-1.,0.,0.)); +#140840 = ORIENTED_EDGE('',*,*,#140841,.F.); +#140841 = EDGE_CURVE('',#140698,#140834,#140842,.T.); +#140842 = LINE('',#140843,#140844); +#140843 = CARTESIAN_POINT('',(0.93674969976,-0.75,-2.9)); +#140844 = VECTOR('',#140845,1.); +#140845 = DIRECTION('',(0.,0.,1.)); +#140846 = ORIENTED_EDGE('',*,*,#140697,.T.); +#140847 = PLANE('',#140848); +#140848 = AXIS2_PLACEMENT_3D('',#140849,#140850,#140851); +#140849 = CARTESIAN_POINT('',(0.93674969976,-0.75,-2.9)); +#140850 = DIRECTION('',(-0.,1.,0.)); +#140851 = DIRECTION('',(1.,0.,0.)); +#140852 = ADVANCED_FACE('',(#140853),#140865,.F.); +#140853 = FACE_BOUND('',#140854,.F.); +#140854 = EDGE_LOOP('',(#140855,#140862,#140863,#140864)); +#140855 = ORIENTED_EDGE('',*,*,#140856,.T.); +#140856 = EDGE_CURVE('',#136343,#140834,#140857,.T.); +#140857 = CIRCLE('',#140858,1.2); +#140858 = AXIS2_PLACEMENT_3D('',#140859,#140860,#140861); +#140859 = CARTESIAN_POINT('',(0.,1.224646799147E-14,8.25)); +#140860 = DIRECTION('',(0.,0.,-1.)); +#140861 = DIRECTION('',(0.7806247498,0.625,0.)); +#140862 = ORIENTED_EDGE('',*,*,#140841,.F.); +#140863 = ORIENTED_EDGE('',*,*,#140705,.T.); +#140864 = ORIENTED_EDGE('',*,*,#136351,.T.); +#140865 = CYLINDRICAL_SURFACE('',#140866,1.2); +#140866 = AXIS2_PLACEMENT_3D('',#140867,#140868,#140869); +#140867 = CARTESIAN_POINT('',(0.,1.224646799147E-14,-2.9)); +#140868 = DIRECTION('',(0.,0.,1.)); +#140869 = DIRECTION('',(1.,0.,-0.)); +#140870 = ADVANCED_FACE('',(#140871,#140890),#140897,.T.); +#140871 = FACE_BOUND('',#140872,.T.); +#140872 = EDGE_LOOP('',(#140873,#140874,#140882,#140889)); +#140873 = ORIENTED_EDGE('',*,*,#140579,.T.); +#140874 = ORIENTED_EDGE('',*,*,#140875,.T.); +#140875 = EDGE_CURVE('',#140570,#140876,#140878,.T.); +#140876 = VERTEX_POINT('',#140877); +#140877 = CARTESIAN_POINT('',(-1.239209686072,1.285640646055,8.25)); +#140878 = LINE('',#140879,#140880); +#140879 = CARTESIAN_POINT('',(1.239209686072,1.285640646055,8.25)); +#140880 = VECTOR('',#140881,1.); +#140881 = DIRECTION('',(-1.,0.,0.)); +#140882 = ORIENTED_EDGE('',*,*,#140883,.T.); +#140883 = EDGE_CURVE('',#140876,#140608,#140884,.T.); +#140884 = CIRCLE('',#140885,1.785640646055); +#140885 = AXIS2_PLACEMENT_3D('',#140886,#140887,#140888); +#140886 = CARTESIAN_POINT('',(0.,0.,8.25)); +#140887 = DIRECTION('',(0.,0.,1.)); +#140888 = DIRECTION('',(-0.693986042942,0.719988452825,0.)); +#140889 = ORIENTED_EDGE('',*,*,#140607,.T.); +#140890 = FACE_BOUND('',#140891,.T.); +#140891 = EDGE_LOOP('',(#140892,#140893,#140894,#140895,#140896)); +#140892 = ORIENTED_EDGE('',*,*,#136342,.T.); +#140893 = ORIENTED_EDGE('',*,*,#140856,.T.); +#140894 = ORIENTED_EDGE('',*,*,#140833,.T.); +#140895 = ORIENTED_EDGE('',*,*,#140816,.T.); +#140896 = ORIENTED_EDGE('',*,*,#140784,.T.); +#140897 = PLANE('',#140898); +#140898 = AXIS2_PLACEMENT_3D('',#140899,#140900,#140901); +#140899 = CARTESIAN_POINT('',(0.,0.,8.25)); +#140900 = DIRECTION('',(0.,0.,1.)); +#140901 = DIRECTION('',(1.,0.,-0.)); +#140902 = ADVANCED_FACE('',(#140903),#140917,.T.); +#140903 = FACE_BOUND('',#140904,.T.); +#140904 = EDGE_LOOP('',(#140905,#140906,#140907,#140915,#140916)); +#140905 = ORIENTED_EDGE('',*,*,#140615,.F.); +#140906 = ORIENTED_EDGE('',*,*,#140883,.F.); +#140907 = ORIENTED_EDGE('',*,*,#140908,.F.); +#140908 = EDGE_CURVE('',#136393,#140876,#140909,.T.); +#140909 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140910,#140911,#140912, + #140913,#140914),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#140910 = CARTESIAN_POINT('',(-1.32287559491,1.499999832065, + 7.450000619704)); +#140911 = CARTESIAN_POINT('',(-1.30864490612,1.462348976011, + 7.590515527447)); +#140912 = CARTESIAN_POINT('',(-1.280451621843,1.388972269428, + 7.864361135063)); +#140913 = CARTESIAN_POINT('',(-1.252848525238,1.319443409257, + 8.123846370294)); +#140914 = CARTESIAN_POINT('',(-1.239209686072,1.285640646055,8.25)); +#140915 = ORIENTED_EDGE('',*,*,#136392,.T.); +#140916 = ORIENTED_EDGE('',*,*,#140554,.T.); +#140917 = CONICAL_SURFACE('',#140918,1.892820355007,0.261799387799); +#140918 = AXIS2_PLACEMENT_3D('',#140919,#140920,#140921); +#140919 = CARTESIAN_POINT('',(0.,0.,7.84999988065)); +#140920 = DIRECTION('',(0.,0.,-1.)); +#140921 = DIRECTION('',(0.,-1.,0.)); +#140922 = ADVANCED_FACE('',(#140923),#140934,.T.); +#140923 = FACE_BOUND('',#140924,.T.); +#140924 = EDGE_LOOP('',(#140925,#140926,#140932,#140933)); +#140925 = ORIENTED_EDGE('',*,*,#140569,.T.); +#140926 = ORIENTED_EDGE('',*,*,#140927,.T.); +#140927 = EDGE_CURVE('',#136419,#136393,#140928,.T.); +#140928 = LINE('',#140929,#140930); +#140929 = CARTESIAN_POINT('',(1.322875655532,1.499999999998, + 7.450000000007)); +#140930 = VECTOR('',#140931,1.); +#140931 = DIRECTION('',(-1.,-6.347281368416E-08,2.342234639339E-07)); +#140932 = ORIENTED_EDGE('',*,*,#140908,.T.); +#140933 = ORIENTED_EDGE('',*,*,#140875,.F.); +#140934 = PLANE('',#140935); +#140935 = AXIS2_PLACEMENT_3D('',#140936,#140937,#140938); +#140936 = CARTESIAN_POINT('',(0.,1.392820323028,7.85)); +#140937 = DIRECTION('',(-0.,0.965925826289,0.258819045102)); +#140938 = DIRECTION('',(1.,0.,0.)); +#140939 = ADVANCED_FACE('',(#140940),#140969,.T.); +#140940 = FACE_BOUND('',#140941,.T.); +#140941 = EDGE_LOOP('',(#140942,#140943,#140944,#140952,#140960,#140966, + #140967,#140968)); +#140942 = ORIENTED_EDGE('',*,*,#136418,.F.); +#140943 = ORIENTED_EDGE('',*,*,#140727,.T.); +#140944 = ORIENTED_EDGE('',*,*,#140945,.T.); +#140945 = EDGE_CURVE('',#140728,#140946,#140948,.T.); +#140946 = VERTEX_POINT('',#140947); +#140947 = CARTESIAN_POINT('',(0.901387818866,1.5,3.25)); +#140948 = LINE('',#140949,#140950); +#140949 = CARTESIAN_POINT('',(0.901387818866,1.5,-2.9)); +#140950 = VECTOR('',#140951,1.); +#140951 = DIRECTION('',(0.,0.,1.)); +#140952 = ORIENTED_EDGE('',*,*,#140953,.T.); +#140953 = EDGE_CURVE('',#140946,#140954,#140956,.T.); +#140954 = VERTEX_POINT('',#140955); +#140955 = CARTESIAN_POINT('',(-0.901387818866,1.5,3.25)); +#140956 = LINE('',#140957,#140958); +#140957 = CARTESIAN_POINT('',(0.901387818866,1.5,3.25)); +#140958 = VECTOR('',#140959,1.); +#140959 = DIRECTION('',(-1.,0.,0.)); +#140960 = ORIENTED_EDGE('',*,*,#140961,.F.); +#140961 = EDGE_CURVE('',#140737,#140954,#140962,.T.); +#140962 = LINE('',#140963,#140964); +#140963 = CARTESIAN_POINT('',(-0.901387818866,1.5,-2.9)); +#140964 = VECTOR('',#140965,1.); +#140965 = DIRECTION('',(0.,0.,1.)); +#140966 = ORIENTED_EDGE('',*,*,#140736,.T.); +#140967 = ORIENTED_EDGE('',*,*,#136401,.T.); +#140968 = ORIENTED_EDGE('',*,*,#140927,.F.); +#140969 = PLANE('',#140970); +#140970 = AXIS2_PLACEMENT_3D('',#140971,#140972,#140973); +#140971 = CARTESIAN_POINT('',(1.322875655532,1.5,-2.9)); +#140972 = DIRECTION('',(-0.,1.,0.)); +#140973 = DIRECTION('',(1.,0.,0.)); +#140974 = ADVANCED_FACE('',(#140975),#141001,.T.); +#140975 = FACE_BOUND('',#140976,.T.); +#140976 = EDGE_LOOP('',(#140977,#140978,#140979,#140980)); +#140977 = ORIENTED_EDGE('',*,*,#140945,.F.); +#140978 = ORIENTED_EDGE('',*,*,#140744,.T.); +#140979 = ORIENTED_EDGE('',*,*,#140961,.T.); +#140980 = ORIENTED_EDGE('',*,*,#140981,.F.); +#140981 = EDGE_CURVE('',#140946,#140954,#140982,.T.); +#140982 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#140983,#140984,#140985, + #140986,#140987,#140988,#140989,#140990,#140991,#140992,#140993, + #140994,#140995,#140996,#140997,#140998,#140999,#141000), + .UNSPECIFIED.,.F.,.F.,(4,1,1,2,2,2,1,1,2,2,4),(0.,0.125,0.1875,0.21875 + ,0.25,0.5,0.625,0.6875,0.71875,0.75,1.),.UNSPECIFIED.); +#140983 = CARTESIAN_POINT('',(0.901387818866,1.5,3.25)); +#140984 = CARTESIAN_POINT('',(0.830650484854,1.542507847478, + 3.122462389112)); +#140985 = CARTESIAN_POINT('',(0.721260745666,1.598259815251, + 2.95518803405)); +#140986 = CARTESIAN_POINT('',(0.587892841482,1.649286621623, + 2.802090727034)); +#140987 = CARTESIAN_POINT('',(0.529503766447,1.668151576633, + 2.745489618433)); +#140988 = CARTESIAN_POINT('',(0.490304071575,1.680060729686, + 2.709758217805)); +#140989 = CARTESIAN_POINT('',(0.469164099127,1.686054895423, + 2.691773736756)); +#140990 = CARTESIAN_POINT('',(0.302932391879,1.730278752391, + 2.559087529468)); +#140991 = CARTESIAN_POINT('',(0.152098307803,1.749956040836, + 2.500049151711)); +#140992 = CARTESIAN_POINT('',(-7.604915390133E-02,1.750021979582, + 2.499851313649)); +#140993 = CARTESIAN_POINT('',(-0.189422758006,1.742659546432, + 2.521941049779)); +#140994 = CARTESIAN_POINT('',(-0.320466740989,1.721128086676, + 2.58654255513)); +#140995 = CARTESIAN_POINT('',(-0.376365900451,1.709127042262, + 2.622549660251)); +#140996 = CARTESIAN_POINT('',(-0.413573662864,1.700510062443, + 2.648403451596)); +#140997 = CARTESIAN_POINT('',(-0.430849282099,1.696238404539, + 2.661219839061)); +#140998 = CARTESIAN_POINT('',(-0.609450928106,1.648810679464, + 2.803518711029)); +#140999 = CARTESIAN_POINT('',(-0.759682231251,1.585154460361, + 2.994508436084)); +#141000 = CARTESIAN_POINT('',(-0.901387818866,1.5,3.25)); +#141001 = CYLINDRICAL_SURFACE('',#141002,1.75); +#141002 = AXIS2_PLACEMENT_3D('',#141003,#141004,#141005); +#141003 = CARTESIAN_POINT('',(0.,1.224646799147E-14,3.25)); +#141004 = DIRECTION('',(0.,0.,1.)); +#141005 = DIRECTION('',(1.,0.,-0.)); +#141006 = ADVANCED_FACE('',(#141007),#141011,.F.); +#141007 = FACE_BOUND('',#141008,.T.); +#141008 = EDGE_LOOP('',(#141009,#141010)); +#141009 = ORIENTED_EDGE('',*,*,#140981,.T.); +#141010 = ORIENTED_EDGE('',*,*,#140953,.F.); +#141011 = PLANE('',#141012); +#141012 = AXIS2_PLACEMENT_3D('',#141013,#141014,#141015); +#141013 = CARTESIAN_POINT('',(3.05,1.5,3.25)); +#141014 = DIRECTION('',(0.,-0.948693762408,-0.316196371213)); +#141015 = DIRECTION('',(0.,0.316196371213,-0.948693762408)); +#141016 = ADVANCED_FACE('',(#141017),#141043,.T.); +#141017 = FACE_BOUND('',#141018,.T.); +#141018 = EDGE_LOOP('',(#141019,#141020,#141021,#141022)); +#141019 = ORIENTED_EDGE('',*,*,#140646,.F.); +#141020 = ORIENTED_EDGE('',*,*,#140768,.T.); +#141021 = ORIENTED_EDGE('',*,*,#140662,.T.); +#141022 = ORIENTED_EDGE('',*,*,#141023,.F.); +#141023 = EDGE_CURVE('',#140647,#140655,#141024,.T.); +#141024 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#141025,#141026,#141027, + #141028,#141029,#141030,#141031,#141032,#141033,#141034,#141035, + #141036,#141037,#141038,#141039,#141040,#141041,#141042), + .UNSPECIFIED.,.F.,.F.,(4,1,1,2,2,2,1,1,2,2,4),(0.,0.125,0.1875,0.21875 + ,0.25,0.5,0.625,0.6875,0.71875,0.75,1.),.UNSPECIFIED.); +#141025 = CARTESIAN_POINT('',(-0.901387818866,-1.5,3.25)); +#141026 = CARTESIAN_POINT('',(-0.830650484854,-1.542507847478, + 3.122462389112)); +#141027 = CARTESIAN_POINT('',(-0.721260745666,-1.598259815251, + 2.95518803405)); +#141028 = CARTESIAN_POINT('',(-0.587892841482,-1.649286621623, + 2.802090727035)); +#141029 = CARTESIAN_POINT('',(-0.529503766447,-1.668151576633, + 2.745489618434)); +#141030 = CARTESIAN_POINT('',(-0.490304071575,-1.680060729686, + 2.709758217805)); +#141031 = CARTESIAN_POINT('',(-0.469164099127,-1.686054895423, + 2.691773736756)); +#141032 = CARTESIAN_POINT('',(-0.302932391879,-1.730278752391, + 2.559087529468)); +#141033 = CARTESIAN_POINT('',(-0.152098307802,-1.749956040836, + 2.500049151712)); +#141034 = CARTESIAN_POINT('',(7.604915390123E-02,-1.750021979582, + 2.49985131365)); +#141035 = CARTESIAN_POINT('',(0.189422758006,-1.742659546432, + 2.52194104978)); +#141036 = CARTESIAN_POINT('',(0.320466740989,-1.721128086675, + 2.58654255513)); +#141037 = CARTESIAN_POINT('',(0.376365900451,-1.709127042262, + 2.622549660252)); +#141038 = CARTESIAN_POINT('',(0.413573662864,-1.700510062443, + 2.648403451596)); +#141039 = CARTESIAN_POINT('',(0.430849282099,-1.696238404539, + 2.661219839061)); +#141040 = CARTESIAN_POINT('',(0.609450928107,-1.648810679464, + 2.803518711029)); +#141041 = CARTESIAN_POINT('',(0.759682231251,-1.585154460361, + 2.994508436084)); +#141042 = CARTESIAN_POINT('',(0.901387818866,-1.5,3.25)); +#141043 = CYLINDRICAL_SURFACE('',#141044,1.75); +#141044 = AXIS2_PLACEMENT_3D('',#141045,#141046,#141047); +#141045 = CARTESIAN_POINT('',(0.,1.224646799147E-14,3.25)); +#141046 = DIRECTION('',(0.,0.,1.)); +#141047 = DIRECTION('',(1.,0.,-0.)); +#141048 = ADVANCED_FACE('',(#141049),#141053,.F.); +#141049 = FACE_BOUND('',#141050,.T.); +#141050 = EDGE_LOOP('',(#141051,#141052)); +#141051 = ORIENTED_EDGE('',*,*,#141023,.T.); +#141052 = ORIENTED_EDGE('',*,*,#140654,.F.); +#141053 = PLANE('',#141054); +#141054 = AXIS2_PLACEMENT_3D('',#141055,#141056,#141057); +#141055 = CARTESIAN_POINT('',(3.05,-1.75,2.49991725967)); +#141056 = DIRECTION('',(0.,0.948693762408,-0.316196371213)); +#141057 = DIRECTION('',(-1.,0.,0.)); +#141058 = ADVANCED_FACE('',(#141059),#141067,.T.); +#141059 = FACE_BOUND('',#141060,.T.); +#141060 = EDGE_LOOP('',(#141061,#141062,#141063,#141064,#141065,#141066) + ); +#141061 = ORIENTED_EDGE('',*,*,#136374,.F.); +#141062 = ORIENTED_EDGE('',*,*,#140423,.T.); +#141063 = ORIENTED_EDGE('',*,*,#136443,.T.); +#141064 = ORIENTED_EDGE('',*,*,#136466,.F.); +#141065 = ORIENTED_EDGE('',*,*,#140760,.F.); +#141066 = ORIENTED_EDGE('',*,*,#140537,.F.); +#141067 = CYLINDRICAL_SURFACE('',#141068,2.); +#141068 = AXIS2_PLACEMENT_3D('',#141069,#141070,#141071); +#141069 = CARTESIAN_POINT('',(0.,0.,-3.9)); +#141070 = DIRECTION('',(0.,0.,1.)); +#141071 = DIRECTION('',(1.,0.,-0.)); +#141072 = ADVANCED_FACE('',(#141073),#141171,.T.); +#141073 = FACE_BOUND('',#141074,.T.); +#141074 = EDGE_LOOP('',(#141075,#141076,#141084,#141092,#141100,#141108, + #141114,#141115,#141123,#141131,#141137,#141138,#141146,#141154, + #141162,#141168,#141169,#141170)); +#141075 = ORIENTED_EDGE('',*,*,#140214,.F.); +#141076 = ORIENTED_EDGE('',*,*,#141077,.F.); +#141077 = EDGE_CURVE('',#141078,#140207,#141080,.T.); +#141078 = VERTEX_POINT('',#141079); +#141079 = CARTESIAN_POINT('',(6.,-6.,-10.8)); +#141080 = LINE('',#141081,#141082); +#141081 = CARTESIAN_POINT('',(6.,-6.,-10.8)); +#141082 = VECTOR('',#141083,1.); +#141083 = DIRECTION('',(0.,0.,1.)); +#141084 = ORIENTED_EDGE('',*,*,#141085,.F.); +#141085 = EDGE_CURVE('',#141086,#141078,#141088,.T.); +#141086 = VERTEX_POINT('',#141087); +#141087 = CARTESIAN_POINT('',(6.,-4.4662,-10.8)); +#141088 = LINE('',#141089,#141090); +#141089 = CARTESIAN_POINT('',(6.,-4.4662,-10.8)); +#141090 = VECTOR('',#141091,1.); +#141091 = DIRECTION('',(0.,-1.,0.)); +#141092 = ORIENTED_EDGE('',*,*,#141093,.T.); +#141093 = EDGE_CURVE('',#141086,#141094,#141096,.T.); +#141094 = VERTEX_POINT('',#141095); +#141095 = CARTESIAN_POINT('',(6.,-4.4662,-9.8)); +#141096 = LINE('',#141097,#141098); +#141097 = CARTESIAN_POINT('',(6.,-4.4662,-10.8)); +#141098 = VECTOR('',#141099,1.); +#141099 = DIRECTION('',(0.,0.,1.)); +#141100 = ORIENTED_EDGE('',*,*,#141101,.F.); +#141101 = EDGE_CURVE('',#141102,#141094,#141104,.T.); +#141102 = VERTEX_POINT('',#141103); +#141103 = CARTESIAN_POINT('',(6.,-3.35479153112,-9.8)); +#141104 = LINE('',#141105,#141106); +#141105 = CARTESIAN_POINT('',(6.,-3.35479153112,-9.8)); +#141106 = VECTOR('',#141107,1.); +#141107 = DIRECTION('',(0.,-1.,0.)); +#141108 = ORIENTED_EDGE('',*,*,#141109,.F.); +#141109 = EDGE_CURVE('',#138325,#141102,#141110,.T.); +#141110 = LINE('',#141111,#141112); +#141111 = CARTESIAN_POINT('',(6.,-3.35479153112,-11.2)); +#141112 = VECTOR('',#141113,1.); +#141113 = DIRECTION('',(0.,0.,1.)); +#141114 = ORIENTED_EDGE('',*,*,#138324,.F.); +#141115 = ORIENTED_EDGE('',*,*,#141116,.T.); +#141116 = EDGE_CURVE('',#138317,#141117,#141119,.T.); +#141117 = VERTEX_POINT('',#141118); +#141118 = CARTESIAN_POINT('',(6.,-2.4,-7.9)); +#141119 = LINE('',#141120,#141121); +#141120 = CARTESIAN_POINT('',(6.,-2.4,-11.2)); +#141121 = VECTOR('',#141122,1.); +#141122 = DIRECTION('',(0.,0.,1.)); +#141123 = ORIENTED_EDGE('',*,*,#141124,.T.); +#141124 = EDGE_CURVE('',#141117,#141125,#141127,.T.); +#141125 = VERTEX_POINT('',#141126); +#141126 = CARTESIAN_POINT('',(6.,2.4,-7.9)); +#141127 = LINE('',#141128,#141129); +#141128 = CARTESIAN_POINT('',(6.,-2.4,-7.9)); +#141129 = VECTOR('',#141130,1.); +#141130 = DIRECTION('',(0.,1.,0.)); +#141131 = ORIENTED_EDGE('',*,*,#141132,.F.); +#141132 = EDGE_CURVE('',#138106,#141125,#141133,.T.); +#141133 = LINE('',#141134,#141135); +#141134 = CARTESIAN_POINT('',(6.,2.4,-11.2)); +#141135 = VECTOR('',#141136,1.); +#141136 = DIRECTION('',(0.,0.,1.)); +#141137 = ORIENTED_EDGE('',*,*,#138105,.F.); +#141138 = ORIENTED_EDGE('',*,*,#141139,.T.); +#141139 = EDGE_CURVE('',#138098,#141140,#141142,.T.); +#141140 = VERTEX_POINT('',#141141); +#141141 = CARTESIAN_POINT('',(6.,3.35479153112,-9.8)); +#141142 = LINE('',#141143,#141144); +#141143 = CARTESIAN_POINT('',(6.,3.35479153112,-11.2)); +#141144 = VECTOR('',#141145,1.); +#141145 = DIRECTION('',(0.,0.,1.)); +#141146 = ORIENTED_EDGE('',*,*,#141147,.F.); +#141147 = EDGE_CURVE('',#141148,#141140,#141150,.T.); +#141148 = VERTEX_POINT('',#141149); +#141149 = CARTESIAN_POINT('',(6.,4.4662,-9.8)); +#141150 = LINE('',#141151,#141152); +#141151 = CARTESIAN_POINT('',(6.,4.4662,-9.8)); +#141152 = VECTOR('',#141153,1.); +#141153 = DIRECTION('',(0.,-1.,0.)); +#141154 = ORIENTED_EDGE('',*,*,#141155,.F.); +#141155 = EDGE_CURVE('',#141156,#141148,#141158,.T.); +#141156 = VERTEX_POINT('',#141157); +#141157 = CARTESIAN_POINT('',(6.,4.4662,-10.8)); +#141158 = LINE('',#141159,#141160); +#141159 = CARTESIAN_POINT('',(6.,4.4662,-10.8)); +#141160 = VECTOR('',#141161,1.); +#141161 = DIRECTION('',(0.,0.,1.)); +#141162 = ORIENTED_EDGE('',*,*,#141163,.F.); +#141163 = EDGE_CURVE('',#139237,#141156,#141164,.T.); +#141164 = LINE('',#141165,#141166); +#141165 = CARTESIAN_POINT('',(6.,6.,-10.8)); +#141166 = VECTOR('',#141167,1.); +#141167 = DIRECTION('',(0.,-1.,0.)); +#141168 = ORIENTED_EDGE('',*,*,#139236,.F.); +#141169 = ORIENTED_EDGE('',*,*,#140235,.F.); +#141170 = ORIENTED_EDGE('',*,*,#139973,.T.); +#141171 = PLANE('',#141172); +#141172 = AXIS2_PLACEMENT_3D('',#141173,#141174,#141175); +#141173 = CARTESIAN_POINT('',(6.,6.,-11.2)); +#141174 = DIRECTION('',(1.,0.,0.)); +#141175 = DIRECTION('',(-0.,1.,0.)); +#141176 = ADVANCED_FACE('',(#141177),#141195,.T.); +#141177 = FACE_BOUND('',#141178,.T.); +#141178 = EDGE_LOOP('',(#141179,#141180,#141188,#141194)); +#141179 = ORIENTED_EDGE('',*,*,#141163,.T.); +#141180 = ORIENTED_EDGE('',*,*,#141181,.T.); +#141181 = EDGE_CURVE('',#141156,#141182,#141184,.T.); +#141182 = VERTEX_POINT('',#141183); +#141183 = CARTESIAN_POINT('',(4.4662,4.4662,-10.8)); +#141184 = LINE('',#141185,#141186); +#141185 = CARTESIAN_POINT('',(6.,4.4662,-10.8)); +#141186 = VECTOR('',#141187,1.); +#141187 = DIRECTION('',(-1.,0.,0.)); +#141188 = ORIENTED_EDGE('',*,*,#141189,.T.); +#141189 = EDGE_CURVE('',#141182,#139245,#141190,.T.); +#141190 = LINE('',#141191,#141192); +#141191 = CARTESIAN_POINT('',(4.4662,4.4662,-10.8)); +#141192 = VECTOR('',#141193,1.); +#141193 = DIRECTION('',(0.,1.,0.)); +#141194 = ORIENTED_EDGE('',*,*,#139244,.T.); +#141195 = PLANE('',#141196); +#141196 = AXIS2_PLACEMENT_3D('',#141197,#141198,#141199); +#141197 = CARTESIAN_POINT('',(0.,0.,-10.8)); +#141198 = DIRECTION('',(0.,0.,-1.)); +#141199 = DIRECTION('',(0.,-1.,0.)); +#141200 = ADVANCED_FACE('',(#141201),#141226,.T.); +#141201 = FACE_BOUND('',#141202,.T.); +#141202 = EDGE_LOOP('',(#141203,#141211,#141219,#141225)); +#141203 = ORIENTED_EDGE('',*,*,#141204,.T.); +#141204 = EDGE_CURVE('',#141078,#141205,#141207,.T.); +#141205 = VERTEX_POINT('',#141206); +#141206 = CARTESIAN_POINT('',(4.4662,-6.,-10.8)); +#141207 = LINE('',#141208,#141209); +#141208 = CARTESIAN_POINT('',(6.,-6.,-10.8)); +#141209 = VECTOR('',#141210,1.); +#141210 = DIRECTION('',(-1.,0.,0.)); +#141211 = ORIENTED_EDGE('',*,*,#141212,.T.); +#141212 = EDGE_CURVE('',#141205,#141213,#141215,.T.); +#141213 = VERTEX_POINT('',#141214); +#141214 = CARTESIAN_POINT('',(4.4662,-4.4662,-10.8)); +#141215 = LINE('',#141216,#141217); +#141216 = CARTESIAN_POINT('',(4.4662,-6.,-10.8)); +#141217 = VECTOR('',#141218,1.); +#141218 = DIRECTION('',(0.,1.,0.)); +#141219 = ORIENTED_EDGE('',*,*,#141220,.T.); +#141220 = EDGE_CURVE('',#141213,#141086,#141221,.T.); +#141221 = LINE('',#141222,#141223); +#141222 = CARTESIAN_POINT('',(4.4662,-4.4662,-10.8)); +#141223 = VECTOR('',#141224,1.); +#141224 = DIRECTION('',(1.,0.,0.)); +#141225 = ORIENTED_EDGE('',*,*,#141085,.T.); +#141226 = PLANE('',#141227); +#141227 = AXIS2_PLACEMENT_3D('',#141228,#141229,#141230); +#141228 = CARTESIAN_POINT('',(0.,0.,-10.8)); +#141229 = DIRECTION('',(0.,0.,-1.)); +#141230 = DIRECTION('',(0.,-1.,0.)); +#141231 = ADVANCED_FACE('',(#141232),#141257,.T.); +#141232 = FACE_BOUND('',#141233,.T.); +#141233 = EDGE_LOOP('',(#141234,#141242,#141250,#141256)); +#141234 = ORIENTED_EDGE('',*,*,#141235,.T.); +#141235 = EDGE_CURVE('',#139841,#141236,#141238,.T.); +#141236 = VERTEX_POINT('',#141237); +#141237 = CARTESIAN_POINT('',(-4.4662,-4.4662,-10.8)); +#141238 = LINE('',#141239,#141240); +#141239 = CARTESIAN_POINT('',(-6.,-4.4662,-10.8)); +#141240 = VECTOR('',#141241,1.); +#141241 = DIRECTION('',(1.,0.,0.)); +#141242 = ORIENTED_EDGE('',*,*,#141243,.T.); +#141243 = EDGE_CURVE('',#141236,#141244,#141246,.T.); +#141244 = VERTEX_POINT('',#141245); +#141245 = CARTESIAN_POINT('',(-4.4662,-6.,-10.8)); +#141246 = LINE('',#141247,#141248); +#141247 = CARTESIAN_POINT('',(-4.4662,-4.4662,-10.8)); +#141248 = VECTOR('',#141249,1.); +#141249 = DIRECTION('',(0.,-1.,0.)); +#141250 = ORIENTED_EDGE('',*,*,#141251,.T.); +#141251 = EDGE_CURVE('',#141244,#139849,#141252,.T.); +#141252 = LINE('',#141253,#141254); +#141253 = CARTESIAN_POINT('',(-4.4662,-6.,-10.8)); +#141254 = VECTOR('',#141255,1.); +#141255 = DIRECTION('',(-1.,0.,0.)); +#141256 = ORIENTED_EDGE('',*,*,#139848,.T.); +#141257 = PLANE('',#141258); +#141258 = AXIS2_PLACEMENT_3D('',#141259,#141260,#141261); +#141259 = CARTESIAN_POINT('',(0.,0.,-10.8)); +#141260 = DIRECTION('',(0.,0.,-1.)); +#141261 = DIRECTION('',(0.,-1.,0.)); +#141262 = ADVANCED_FACE('',(#141263),#141281,.T.); +#141263 = FACE_BOUND('',#141264,.T.); +#141264 = EDGE_LOOP('',(#141265,#141266,#141274,#141280)); +#141265 = ORIENTED_EDGE('',*,*,#139212,.T.); +#141266 = ORIENTED_EDGE('',*,*,#141267,.T.); +#141267 = EDGE_CURVE('',#139205,#141268,#141270,.T.); +#141268 = VERTEX_POINT('',#141269); +#141269 = CARTESIAN_POINT('',(-4.4662,4.4662,-10.8)); +#141270 = LINE('',#141271,#141272); +#141271 = CARTESIAN_POINT('',(-4.4662,6.,-10.8)); +#141272 = VECTOR('',#141273,1.); +#141273 = DIRECTION('',(0.,-1.,0.)); +#141274 = ORIENTED_EDGE('',*,*,#141275,.T.); +#141275 = EDGE_CURVE('',#141268,#139784,#141276,.T.); +#141276 = LINE('',#141277,#141278); +#141277 = CARTESIAN_POINT('',(-4.4662,4.4662,-10.8)); +#141278 = VECTOR('',#141279,1.); +#141279 = DIRECTION('',(-1.,0.,0.)); +#141280 = ORIENTED_EDGE('',*,*,#139783,.T.); +#141281 = PLANE('',#141282); +#141282 = AXIS2_PLACEMENT_3D('',#141283,#141284,#141285); +#141283 = CARTESIAN_POINT('',(0.,0.,-10.8)); +#141284 = DIRECTION('',(0.,0.,-1.)); +#141285 = DIRECTION('',(0.,-1.,0.)); +#141286 = ADVANCED_FACE('',(#141287),#141336,.F.); +#141287 = FACE_BOUND('',#141288,.T.); +#141288 = EDGE_LOOP('',(#141289,#141290,#141291,#141297,#141298,#141306, + #141314,#141322,#141330)); +#141289 = ORIENTED_EDGE('',*,*,#139252,.F.); +#141290 = ORIENTED_EDGE('',*,*,#141189,.F.); +#141291 = ORIENTED_EDGE('',*,*,#141292,.F.); +#141292 = EDGE_CURVE('',#138074,#141182,#141293,.T.); +#141293 = LINE('',#141294,#141295); +#141294 = CARTESIAN_POINT('',(4.4662,4.4662,-11.2)); +#141295 = VECTOR('',#141296,1.); +#141296 = DIRECTION('',(0.,0.,1.)); +#141297 = ORIENTED_EDGE('',*,*,#138073,.F.); +#141298 = ORIENTED_EDGE('',*,*,#141299,.T.); +#141299 = EDGE_CURVE('',#138066,#141300,#141302,.T.); +#141300 = VERTEX_POINT('',#141301); +#141301 = CARTESIAN_POINT('',(4.4662,7.638989411558,-8.767123853292)); +#141302 = LINE('',#141303,#141304); +#141303 = CARTESIAN_POINT('',(4.4662,7.638989411558,-11.2)); +#141304 = VECTOR('',#141305,1.); +#141305 = DIRECTION('',(0.,0.,1.)); +#141306 = ORIENTED_EDGE('',*,*,#141307,.T.); +#141307 = EDGE_CURVE('',#141300,#141308,#141310,.T.); +#141308 = VERTEX_POINT('',#141309); +#141309 = CARTESIAN_POINT('',(4.4662,6.987402152602,-8.767123853292)); +#141310 = LINE('',#141311,#141312); +#141311 = CARTESIAN_POINT('',(4.4662,7.638989411558,-8.767123853292)); +#141312 = VECTOR('',#141313,1.); +#141313 = DIRECTION('',(0.,-1.,0.)); +#141314 = ORIENTED_EDGE('',*,*,#141315,.T.); +#141315 = EDGE_CURVE('',#141308,#141316,#141318,.T.); +#141316 = VERTEX_POINT('',#141317); +#141317 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.275197376483)); +#141318 = LINE('',#141319,#141320); +#141319 = CARTESIAN_POINT('',(4.4662,6.987402152602,-8.767123853292)); +#141320 = VECTOR('',#141321,1.); +#141321 = DIRECTION('',(0.,-0.60257500546,-0.798062254962)); +#141322 = ORIENTED_EDGE('',*,*,#141323,.T.); +#141323 = EDGE_CURVE('',#141316,#141324,#141326,.T.); +#141324 = VERTEX_POINT('',#141325); +#141325 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.8)); +#141326 = LINE('',#141327,#141328); +#141327 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.275197376483)); +#141328 = VECTOR('',#141329,1.); +#141329 = DIRECTION('',(0.,0.,-1.)); +#141330 = ORIENTED_EDGE('',*,*,#141331,.T.); +#141331 = EDGE_CURVE('',#141324,#139253,#141332,.T.); +#141332 = LINE('',#141333,#141334); +#141333 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.8)); +#141334 = VECTOR('',#141335,1.); +#141335 = DIRECTION('',(0.,-1.,0.)); +#141336 = PLANE('',#141337); +#141337 = AXIS2_PLACEMENT_3D('',#141338,#141339,#141340); +#141338 = CARTESIAN_POINT('',(4.4662,4.4662,-11.2)); +#141339 = DIRECTION('',(-1.,0.,0.)); +#141340 = DIRECTION('',(0.,0.,1.)); +#141341 = ADVANCED_FACE('',(#141342),#141360,.F.); +#141342 = FACE_BOUND('',#141343,.T.); +#141343 = EDGE_LOOP('',(#141344,#141352,#141353,#141354)); +#141344 = ORIENTED_EDGE('',*,*,#141345,.F.); +#141345 = EDGE_CURVE('',#139261,#141346,#141348,.T.); +#141346 = VERTEX_POINT('',#141347); +#141347 = CARTESIAN_POINT('',(3.43613632781,6.603782448615,-9.8)); +#141348 = LINE('',#141349,#141350); +#141349 = CARTESIAN_POINT('',(3.43613632781,6.,-9.8)); +#141350 = VECTOR('',#141351,1.); +#141351 = DIRECTION('',(0.,1.,0.)); +#141352 = ORIENTED_EDGE('',*,*,#139260,.F.); +#141353 = ORIENTED_EDGE('',*,*,#141331,.F.); +#141354 = ORIENTED_EDGE('',*,*,#141355,.F.); +#141355 = EDGE_CURVE('',#141346,#141324,#141356,.T.); +#141356 = LINE('',#141357,#141358); +#141357 = CARTESIAN_POINT('',(3.43613632781,6.603782448615,-9.8)); +#141358 = VECTOR('',#141359,1.); +#141359 = DIRECTION('',(1.,0.,0.)); +#141360 = PLANE('',#141361); +#141361 = AXIS2_PLACEMENT_3D('',#141362,#141363,#141364); +#141362 = CARTESIAN_POINT('',(0.,0.,-9.8)); +#141363 = DIRECTION('',(0.,0.,-1.)); +#141364 = DIRECTION('',(0.,-1.,0.)); +#141365 = ADVANCED_FACE('',(#141366),#141391,.F.); +#141366 = FACE_BOUND('',#141367,.T.); +#141367 = EDGE_LOOP('',(#141368,#141376,#141377,#141385)); +#141368 = ORIENTED_EDGE('',*,*,#141369,.F.); +#141369 = EDGE_CURVE('',#139197,#141370,#141372,.T.); +#141370 = VERTEX_POINT('',#141371); +#141371 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.8)); +#141372 = LINE('',#141373,#141374); +#141373 = CARTESIAN_POINT('',(-4.4662,6.,-9.8)); +#141374 = VECTOR('',#141375,1.); +#141375 = DIRECTION('',(0.,1.,0.)); +#141376 = ORIENTED_EDGE('',*,*,#139196,.F.); +#141377 = ORIENTED_EDGE('',*,*,#141378,.F.); +#141378 = EDGE_CURVE('',#141379,#139189,#141381,.T.); +#141379 = VERTEX_POINT('',#141380); +#141380 = CARTESIAN_POINT('',(-3.43613632781,6.603782448615,-9.8)); +#141381 = LINE('',#141382,#141383); +#141382 = CARTESIAN_POINT('',(-3.43613632781,6.603782448615,-9.8)); +#141383 = VECTOR('',#141384,1.); +#141384 = DIRECTION('',(0.,-1.,0.)); +#141385 = ORIENTED_EDGE('',*,*,#141386,.F.); +#141386 = EDGE_CURVE('',#141370,#141379,#141387,.T.); +#141387 = LINE('',#141388,#141389); +#141388 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.8)); +#141389 = VECTOR('',#141390,1.); +#141390 = DIRECTION('',(1.,0.,0.)); +#141391 = PLANE('',#141392); +#141392 = AXIS2_PLACEMENT_3D('',#141393,#141394,#141395); +#141393 = CARTESIAN_POINT('',(0.,0.,-9.8)); +#141394 = DIRECTION('',(0.,0.,-1.)); +#141395 = DIRECTION('',(0.,-1.,0.)); +#141396 = ADVANCED_FACE('',(#141397),#141422,.F.); +#141397 = FACE_BOUND('',#141398,.T.); +#141398 = EDGE_LOOP('',(#141399,#141407,#141408,#141416)); +#141399 = ORIENTED_EDGE('',*,*,#141400,.F.); +#141400 = EDGE_CURVE('',#141148,#141401,#141403,.T.); +#141401 = VERTEX_POINT('',#141402); +#141402 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.8)); +#141403 = LINE('',#141404,#141405); +#141404 = CARTESIAN_POINT('',(6.,4.4662,-9.8)); +#141405 = VECTOR('',#141406,1.); +#141406 = DIRECTION('',(1.,0.,0.)); +#141407 = ORIENTED_EDGE('',*,*,#141147,.T.); +#141408 = ORIENTED_EDGE('',*,*,#141409,.F.); +#141409 = EDGE_CURVE('',#141410,#141140,#141412,.T.); +#141410 = VERTEX_POINT('',#141411); +#141411 = CARTESIAN_POINT('',(6.614654311337,3.35479153112,-9.8)); +#141412 = LINE('',#141413,#141414); +#141413 = CARTESIAN_POINT('',(6.614654311337,3.35479153112,-9.8)); +#141414 = VECTOR('',#141415,1.); +#141415 = DIRECTION('',(-1.,0.,0.)); +#141416 = ORIENTED_EDGE('',*,*,#141417,.T.); +#141417 = EDGE_CURVE('',#141410,#141401,#141418,.T.); +#141418 = LINE('',#141419,#141420); +#141419 = CARTESIAN_POINT('',(6.614654311337,3.35479153112,-9.8)); +#141420 = VECTOR('',#141421,1.); +#141421 = DIRECTION('',(0.,1.,0.)); +#141422 = PLANE('',#141423); +#141423 = AXIS2_PLACEMENT_3D('',#141424,#141425,#141426); +#141424 = CARTESIAN_POINT('',(0.,0.,-9.8)); +#141425 = DIRECTION('',(0.,0.,-1.)); +#141426 = DIRECTION('',(0.,-1.,0.)); +#141427 = ADVANCED_FACE('',(#141428),#141453,.F.); +#141428 = FACE_BOUND('',#141429,.T.); +#141429 = EDGE_LOOP('',(#141430,#141438,#141439,#141447)); +#141430 = ORIENTED_EDGE('',*,*,#141431,.F.); +#141431 = EDGE_CURVE('',#141102,#141432,#141434,.T.); +#141432 = VERTEX_POINT('',#141433); +#141433 = CARTESIAN_POINT('',(6.614654311337,-3.35479153112,-9.8)); +#141434 = LINE('',#141435,#141436); +#141435 = CARTESIAN_POINT('',(6.,-3.35479153112,-9.8)); +#141436 = VECTOR('',#141437,1.); +#141437 = DIRECTION('',(1.,0.,0.)); +#141438 = ORIENTED_EDGE('',*,*,#141101,.T.); +#141439 = ORIENTED_EDGE('',*,*,#141440,.F.); +#141440 = EDGE_CURVE('',#141441,#141094,#141443,.T.); +#141441 = VERTEX_POINT('',#141442); +#141442 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.8)); +#141443 = LINE('',#141444,#141445); +#141444 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.8)); +#141445 = VECTOR('',#141446,1.); +#141446 = DIRECTION('',(-1.,0.,0.)); +#141447 = ORIENTED_EDGE('',*,*,#141448,.T.); +#141448 = EDGE_CURVE('',#141441,#141432,#141449,.T.); +#141449 = LINE('',#141450,#141451); +#141450 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.8)); +#141451 = VECTOR('',#141452,1.); +#141452 = DIRECTION('',(0.,1.,0.)); +#141453 = PLANE('',#141454); +#141454 = AXIS2_PLACEMENT_3D('',#141455,#141456,#141457); +#141455 = CARTESIAN_POINT('',(0.,0.,-9.8)); +#141456 = DIRECTION('',(0.,0.,-1.)); +#141457 = DIRECTION('',(0.,-1.,0.)); +#141458 = ADVANCED_FACE('',(#141459),#141477,.T.); +#141459 = FACE_BOUND('',#141460,.T.); +#141460 = EDGE_LOOP('',(#141461,#141462,#141470,#141476)); +#141461 = ORIENTED_EDGE('',*,*,#141323,.F.); +#141462 = ORIENTED_EDGE('',*,*,#141463,.T.); +#141463 = EDGE_CURVE('',#141316,#141464,#141466,.T.); +#141464 = VERTEX_POINT('',#141465); +#141465 = CARTESIAN_POINT('',(3.43613632781,6.603782448615, + -9.275197376483)); +#141466 = LINE('',#141467,#141468); +#141467 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.275197376483)); +#141468 = VECTOR('',#141469,1.); +#141469 = DIRECTION('',(-1.,0.,0.)); +#141470 = ORIENTED_EDGE('',*,*,#141471,.T.); +#141471 = EDGE_CURVE('',#141464,#141346,#141472,.T.); +#141472 = LINE('',#141473,#141474); +#141473 = CARTESIAN_POINT('',(3.43613632781,6.603782448615, + -9.275197376483)); +#141474 = VECTOR('',#141475,1.); +#141475 = DIRECTION('',(0.,0.,-1.)); +#141476 = ORIENTED_EDGE('',*,*,#141355,.T.); +#141477 = PLANE('',#141478); +#141478 = AXIS2_PLACEMENT_3D('',#141479,#141480,#141481); +#141479 = CARTESIAN_POINT('',(4.4662,6.603782448615,-9.275197376483)); +#141480 = DIRECTION('',(0.,-1.,0.)); +#141481 = DIRECTION('',(0.,0.,-1.)); +#141482 = ADVANCED_FACE('',(#141483),#141511,.T.); +#141483 = FACE_BOUND('',#141484,.T.); +#141484 = EDGE_LOOP('',(#141485,#141486,#141487,#141488,#141489,#141497, + #141505)); +#141485 = ORIENTED_EDGE('',*,*,#138057,.F.); +#141486 = ORIENTED_EDGE('',*,*,#139268,.T.); +#141487 = ORIENTED_EDGE('',*,*,#141345,.T.); +#141488 = ORIENTED_EDGE('',*,*,#141471,.F.); +#141489 = ORIENTED_EDGE('',*,*,#141490,.F.); +#141490 = EDGE_CURVE('',#141491,#141464,#141493,.T.); +#141491 = VERTEX_POINT('',#141492); +#141492 = CARTESIAN_POINT('',(3.43613632781,6.987402152602, + -8.767123853292)); +#141493 = LINE('',#141494,#141495); +#141494 = CARTESIAN_POINT('',(3.43613632781,6.987402152602, + -8.767123853292)); +#141495 = VECTOR('',#141496,1.); +#141496 = DIRECTION('',(0.,-0.60257500546,-0.798062254962)); +#141497 = ORIENTED_EDGE('',*,*,#141498,.F.); +#141498 = EDGE_CURVE('',#141499,#141491,#141501,.T.); +#141499 = VERTEX_POINT('',#141500); +#141500 = CARTESIAN_POINT('',(3.43613632781,7.638989411558, + -8.767123853292)); +#141501 = LINE('',#141502,#141503); +#141502 = CARTESIAN_POINT('',(3.43613632781,7.638989411558, + -8.767123853292)); +#141503 = VECTOR('',#141504,1.); +#141504 = DIRECTION('',(0.,-1.,0.)); +#141505 = ORIENTED_EDGE('',*,*,#141506,.F.); +#141506 = EDGE_CURVE('',#138058,#141499,#141507,.T.); +#141507 = LINE('',#141508,#141509); +#141508 = CARTESIAN_POINT('',(3.43613632781,7.638989411558,-11.2)); +#141509 = VECTOR('',#141510,1.); +#141510 = DIRECTION('',(0.,0.,1.)); +#141511 = PLANE('',#141512); +#141512 = AXIS2_PLACEMENT_3D('',#141513,#141514,#141515); +#141513 = CARTESIAN_POINT('',(3.43613632781,6.,-11.2)); +#141514 = DIRECTION('',(-1.,0.,0.)); +#141515 = DIRECTION('',(0.,0.,1.)); +#141516 = ADVANCED_FACE('',(#141517),#141528,.T.); +#141517 = FACE_BOUND('',#141518,.T.); +#141518 = EDGE_LOOP('',(#141519,#141520,#141521,#141527)); +#141519 = ORIENTED_EDGE('',*,*,#138065,.F.); +#141520 = ORIENTED_EDGE('',*,*,#141506,.T.); +#141521 = ORIENTED_EDGE('',*,*,#141522,.F.); +#141522 = EDGE_CURVE('',#141300,#141499,#141523,.T.); +#141523 = LINE('',#141524,#141525); +#141524 = CARTESIAN_POINT('',(4.4662,7.638989411558,-8.767123853292)); +#141525 = VECTOR('',#141526,1.); +#141526 = DIRECTION('',(-1.,0.,0.)); +#141527 = ORIENTED_EDGE('',*,*,#141299,.F.); +#141528 = PLANE('',#141529); +#141529 = AXIS2_PLACEMENT_3D('',#141530,#141531,#141532); +#141530 = CARTESIAN_POINT('',(3.43613632781,7.638989411558,-11.2)); +#141531 = DIRECTION('',(-0.,1.,0.)); +#141532 = DIRECTION('',(1.,0.,0.)); +#141533 = ADVANCED_FACE('',(#141534),#141545,.T.); +#141534 = FACE_BOUND('',#141535,.T.); +#141535 = EDGE_LOOP('',(#141536,#141537,#141538,#141544)); +#141536 = ORIENTED_EDGE('',*,*,#141522,.T.); +#141537 = ORIENTED_EDGE('',*,*,#141498,.T.); +#141538 = ORIENTED_EDGE('',*,*,#141539,.F.); +#141539 = EDGE_CURVE('',#141308,#141491,#141540,.T.); +#141540 = LINE('',#141541,#141542); +#141541 = CARTESIAN_POINT('',(4.4662,6.987402152602,-8.767123853292)); +#141542 = VECTOR('',#141543,1.); +#141543 = DIRECTION('',(-1.,0.,0.)); +#141544 = ORIENTED_EDGE('',*,*,#141307,.F.); +#141545 = PLANE('',#141546); +#141546 = AXIS2_PLACEMENT_3D('',#141547,#141548,#141549); +#141547 = CARTESIAN_POINT('',(4.4662,7.638989411558,-8.767123853292)); +#141548 = DIRECTION('',(0.,0.,1.)); +#141549 = DIRECTION('',(1.,0.,-0.)); +#141550 = ADVANCED_FACE('',(#141551),#141557,.T.); +#141551 = FACE_BOUND('',#141552,.T.); +#141552 = EDGE_LOOP('',(#141553,#141554,#141555,#141556)); +#141553 = ORIENTED_EDGE('',*,*,#141539,.T.); +#141554 = ORIENTED_EDGE('',*,*,#141490,.T.); +#141555 = ORIENTED_EDGE('',*,*,#141463,.F.); +#141556 = ORIENTED_EDGE('',*,*,#141315,.F.); +#141557 = PLANE('',#141558); +#141558 = AXIS2_PLACEMENT_3D('',#141559,#141560,#141561); +#141559 = CARTESIAN_POINT('',(4.4662,6.987402152602,-8.767123853292)); +#141560 = DIRECTION('',(0.,-0.798062254962,0.602575005461)); +#141561 = DIRECTION('',(-1.,0.,0.)); +#141562 = ADVANCED_FACE('',(#141563),#141588,.F.); +#141563 = FACE_BOUND('',#141564,.T.); +#141564 = EDGE_LOOP('',(#141565,#141566,#141574,#141582)); +#141565 = ORIENTED_EDGE('',*,*,#141386,.T.); +#141566 = ORIENTED_EDGE('',*,*,#141567,.F.); +#141567 = EDGE_CURVE('',#141568,#141379,#141570,.T.); +#141568 = VERTEX_POINT('',#141569); +#141569 = CARTESIAN_POINT('',(-3.43613632781,6.603782448615, + -9.275197376483)); +#141570 = LINE('',#141571,#141572); +#141571 = CARTESIAN_POINT('',(-3.43613632781,6.603782448615, + -9.275197376483)); +#141572 = VECTOR('',#141573,1.); +#141573 = DIRECTION('',(0.,0.,-1.)); +#141574 = ORIENTED_EDGE('',*,*,#141575,.F.); +#141575 = EDGE_CURVE('',#141576,#141568,#141578,.T.); +#141576 = VERTEX_POINT('',#141577); +#141577 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.275197376483)); +#141578 = LINE('',#141579,#141580); +#141579 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.275197376483)); +#141580 = VECTOR('',#141581,1.); +#141581 = DIRECTION('',(1.,0.,0.)); +#141582 = ORIENTED_EDGE('',*,*,#141583,.T.); +#141583 = EDGE_CURVE('',#141576,#141370,#141584,.T.); +#141584 = LINE('',#141585,#141586); +#141585 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.275197376483)); +#141586 = VECTOR('',#141587,1.); +#141587 = DIRECTION('',(0.,0.,-1.)); +#141588 = PLANE('',#141589); +#141589 = AXIS2_PLACEMENT_3D('',#141590,#141591,#141592); +#141590 = CARTESIAN_POINT('',(-4.4662,6.603782448615,-9.275197376483)); +#141591 = DIRECTION('',(-0.,1.,0.)); +#141592 = DIRECTION('',(1.,0.,0.)); +#141593 = ADVANCED_FACE('',(#141594),#141629,.F.); +#141594 = FACE_BOUND('',#141595,.T.); +#141595 = EDGE_LOOP('',(#141596,#141597,#141603,#141604,#141605,#141606, + #141607,#141615,#141623)); +#141596 = ORIENTED_EDGE('',*,*,#138168,.F.); +#141597 = ORIENTED_EDGE('',*,*,#141598,.T.); +#141598 = EDGE_CURVE('',#138169,#141268,#141599,.T.); +#141599 = LINE('',#141600,#141601); +#141600 = CARTESIAN_POINT('',(-4.4662,4.4662,-11.2)); +#141601 = VECTOR('',#141602,1.); +#141602 = DIRECTION('',(0.,0.,1.)); +#141603 = ORIENTED_EDGE('',*,*,#141267,.F.); +#141604 = ORIENTED_EDGE('',*,*,#139204,.T.); +#141605 = ORIENTED_EDGE('',*,*,#141369,.T.); +#141606 = ORIENTED_EDGE('',*,*,#141583,.F.); +#141607 = ORIENTED_EDGE('',*,*,#141608,.F.); +#141608 = EDGE_CURVE('',#141609,#141576,#141611,.T.); +#141609 = VERTEX_POINT('',#141610); +#141610 = CARTESIAN_POINT('',(-4.4662,6.987402152602,-8.767123853292)); +#141611 = LINE('',#141612,#141613); +#141612 = CARTESIAN_POINT('',(-4.4662,6.987402152602,-8.767123853292)); +#141613 = VECTOR('',#141614,1.); +#141614 = DIRECTION('',(0.,-0.602575005461,-0.798062254962)); +#141615 = ORIENTED_EDGE('',*,*,#141616,.F.); +#141616 = EDGE_CURVE('',#141617,#141609,#141619,.T.); +#141617 = VERTEX_POINT('',#141618); +#141618 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-8.767123853292)); +#141619 = LINE('',#141620,#141621); +#141620 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-8.767123853292)); +#141621 = VECTOR('',#141622,1.); +#141622 = DIRECTION('',(0.,-1.,0.)); +#141623 = ORIENTED_EDGE('',*,*,#141624,.T.); +#141624 = EDGE_CURVE('',#141617,#138171,#141625,.T.); +#141625 = LINE('',#141626,#141627); +#141626 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-8.767123853292)); +#141627 = VECTOR('',#141628,1.); +#141628 = DIRECTION('',(0.,0.,-1.)); +#141629 = PLANE('',#141630); +#141630 = AXIS2_PLACEMENT_3D('',#141631,#141632,#141633); +#141631 = CARTESIAN_POINT('',(-4.4662,6.,-11.2)); +#141632 = DIRECTION('',(1.,0.,0.)); +#141633 = DIRECTION('',(-0.,1.,0.)); +#141634 = ADVANCED_FACE('',(#141635),#141653,.T.); +#141635 = FACE_BOUND('',#141636,.T.); +#141636 = EDGE_LOOP('',(#141637,#141638,#141639,#141647)); +#141637 = ORIENTED_EDGE('',*,*,#138178,.F.); +#141638 = ORIENTED_EDGE('',*,*,#141624,.F.); +#141639 = ORIENTED_EDGE('',*,*,#141640,.T.); +#141640 = EDGE_CURVE('',#141617,#141641,#141643,.T.); +#141641 = VERTEX_POINT('',#141642); +#141642 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558, + -8.767123853292)); +#141643 = LINE('',#141644,#141645); +#141644 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-8.767123853292)); +#141645 = VECTOR('',#141646,1.); +#141646 = DIRECTION('',(1.,0.,0.)); +#141647 = ORIENTED_EDGE('',*,*,#141648,.T.); +#141648 = EDGE_CURVE('',#141641,#138179,#141649,.T.); +#141649 = LINE('',#141650,#141651); +#141650 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558, + -8.767123853292)); +#141651 = VECTOR('',#141652,1.); +#141652 = DIRECTION('',(0.,0.,-1.)); +#141653 = PLANE('',#141654); +#141654 = AXIS2_PLACEMENT_3D('',#141655,#141656,#141657); +#141655 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-11.2)); +#141656 = DIRECTION('',(-0.,1.,0.)); +#141657 = DIRECTION('',(1.,0.,0.)); +#141658 = ADVANCED_FACE('',(#141659),#141680,.T.); +#141659 = FACE_BOUND('',#141660,.T.); +#141660 = EDGE_LOOP('',(#141661,#141662,#141663,#141664,#141672,#141678, + #141679)); +#141661 = ORIENTED_EDGE('',*,*,#139188,.F.); +#141662 = ORIENTED_EDGE('',*,*,#138186,.F.); +#141663 = ORIENTED_EDGE('',*,*,#141648,.F.); +#141664 = ORIENTED_EDGE('',*,*,#141665,.T.); +#141665 = EDGE_CURVE('',#141641,#141666,#141668,.T.); +#141666 = VERTEX_POINT('',#141667); +#141667 = CARTESIAN_POINT('',(-3.43613632781,6.987402152602, + -8.767123853292)); +#141668 = LINE('',#141669,#141670); +#141669 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558, + -8.767123853292)); +#141670 = VECTOR('',#141671,1.); +#141671 = DIRECTION('',(0.,-1.,0.)); +#141672 = ORIENTED_EDGE('',*,*,#141673,.T.); +#141673 = EDGE_CURVE('',#141666,#141568,#141674,.T.); +#141674 = LINE('',#141675,#141676); +#141675 = CARTESIAN_POINT('',(-3.43613632781,6.987402152602, + -8.767123853292)); +#141676 = VECTOR('',#141677,1.); +#141677 = DIRECTION('',(0.,-0.60257500546,-0.798062254962)); +#141678 = ORIENTED_EDGE('',*,*,#141567,.T.); +#141679 = ORIENTED_EDGE('',*,*,#141378,.T.); +#141680 = PLANE('',#141681); +#141681 = AXIS2_PLACEMENT_3D('',#141682,#141683,#141684); +#141682 = CARTESIAN_POINT('',(-3.43613632781,7.638989411558,-11.2)); +#141683 = DIRECTION('',(1.,0.,0.)); +#141684 = DIRECTION('',(-0.,1.,0.)); +#141685 = ADVANCED_FACE('',(#141686),#141697,.F.); +#141686 = FACE_BOUND('',#141687,.T.); +#141687 = EDGE_LOOP('',(#141688,#141689,#141690,#141696)); +#141688 = ORIENTED_EDGE('',*,*,#141575,.T.); +#141689 = ORIENTED_EDGE('',*,*,#141673,.F.); +#141690 = ORIENTED_EDGE('',*,*,#141691,.F.); +#141691 = EDGE_CURVE('',#141609,#141666,#141692,.T.); +#141692 = LINE('',#141693,#141694); +#141693 = CARTESIAN_POINT('',(-4.4662,6.987402152602,-8.767123853292)); +#141694 = VECTOR('',#141695,1.); +#141695 = DIRECTION('',(1.,0.,0.)); +#141696 = ORIENTED_EDGE('',*,*,#141608,.T.); +#141697 = PLANE('',#141698); +#141698 = AXIS2_PLACEMENT_3D('',#141699,#141700,#141701); +#141699 = CARTESIAN_POINT('',(-4.4662,6.987402152602,-8.767123853292)); +#141700 = DIRECTION('',(0.,0.798062254962,-0.602575005461)); +#141701 = DIRECTION('',(-1.,0.,0.)); +#141702 = ADVANCED_FACE('',(#141703),#141709,.F.); +#141703 = FACE_BOUND('',#141704,.T.); +#141704 = EDGE_LOOP('',(#141705,#141706,#141707,#141708)); +#141705 = ORIENTED_EDGE('',*,*,#141691,.T.); +#141706 = ORIENTED_EDGE('',*,*,#141665,.F.); +#141707 = ORIENTED_EDGE('',*,*,#141640,.F.); +#141708 = ORIENTED_EDGE('',*,*,#141616,.T.); +#141709 = PLANE('',#141710); +#141710 = AXIS2_PLACEMENT_3D('',#141711,#141712,#141713); +#141711 = CARTESIAN_POINT('',(-4.4662,7.638989411558,-8.767123853292)); +#141712 = DIRECTION('',(0.,0.,-1.)); +#141713 = DIRECTION('',(0.,-1.,0.)); +#141714 = ADVANCED_FACE('',(#141715),#141728,.F.); +#141715 = FACE_BOUND('',#141716,.T.); +#141716 = EDGE_LOOP('',(#141717,#141718,#141719,#141720,#141726,#141727) + ); +#141717 = ORIENTED_EDGE('',*,*,#141598,.F.); +#141718 = ORIENTED_EDGE('',*,*,#138259,.F.); +#141719 = ORIENTED_EDGE('',*,*,#139628,.F.); +#141720 = ORIENTED_EDGE('',*,*,#141721,.F.); +#141721 = EDGE_CURVE('',#139792,#139621,#141722,.T.); +#141722 = LINE('',#141723,#141724); +#141723 = CARTESIAN_POINT('',(-6.,4.4662,-9.63058359573)); +#141724 = VECTOR('',#141725,1.); +#141725 = DIRECTION('',(-1.,0.,0.)); +#141726 = ORIENTED_EDGE('',*,*,#139791,.F.); +#141727 = ORIENTED_EDGE('',*,*,#141275,.F.); +#141728 = PLANE('',#141729); +#141729 = AXIS2_PLACEMENT_3D('',#141730,#141731,#141732); +#141730 = CARTESIAN_POINT('',(-4.4662,4.4662,-11.2)); +#141731 = DIRECTION('',(0.,-1.,0.)); +#141732 = DIRECTION('',(0.,0.,-1.)); +#141733 = ADVANCED_FACE('',(#141734),#141740,.T.); +#141734 = FACE_BOUND('',#141735,.T.); +#141735 = EDGE_LOOP('',(#141736,#141737,#141738,#141739)); +#141736 = ORIENTED_EDGE('',*,*,#141721,.T.); +#141737 = ORIENTED_EDGE('',*,*,#139620,.F.); +#141738 = ORIENTED_EDGE('',*,*,#139750,.F.); +#141739 = ORIENTED_EDGE('',*,*,#139799,.T.); +#141740 = PLANE('',#141741); +#141741 = AXIS2_PLACEMENT_3D('',#141742,#141743,#141744); +#141742 = CARTESIAN_POINT('',(-6.,3.224780407747,-9.63058359573)); +#141743 = DIRECTION('',(0.,0.,1.)); +#141744 = DIRECTION('',(1.,0.,-0.)); +#141745 = ADVANCED_FACE('',(#141746),#141771,.T.); +#141746 = FACE_BOUND('',#141747,.T.); +#141747 = EDGE_LOOP('',(#141748,#141756,#141764,#141770)); +#141748 = ORIENTED_EDGE('',*,*,#141749,.T.); +#141749 = EDGE_CURVE('',#141410,#141750,#141752,.T.); +#141750 = VERTEX_POINT('',#141751); +#141751 = CARTESIAN_POINT('',(6.614654311337,3.35479153112, + -9.235553196642)); +#141752 = LINE('',#141753,#141754); +#141753 = CARTESIAN_POINT('',(6.614654311337,3.35479153112,-9.8)); +#141754 = VECTOR('',#141755,1.); +#141755 = DIRECTION('',(0.,0.,1.)); +#141756 = ORIENTED_EDGE('',*,*,#141757,.F.); +#141757 = EDGE_CURVE('',#141758,#141750,#141760,.T.); +#141758 = VERTEX_POINT('',#141759); +#141759 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.235553196642)); +#141760 = LINE('',#141761,#141762); +#141761 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.235553196642)); +#141762 = VECTOR('',#141763,1.); +#141763 = DIRECTION('',(0.,-1.,0.)); +#141764 = ORIENTED_EDGE('',*,*,#141765,.F.); +#141765 = EDGE_CURVE('',#141401,#141758,#141766,.T.); +#141766 = LINE('',#141767,#141768); +#141767 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.8)); +#141768 = VECTOR('',#141769,1.); +#141769 = DIRECTION('',(0.,0.,1.)); +#141770 = ORIENTED_EDGE('',*,*,#141417,.F.); +#141771 = PLANE('',#141772); +#141772 = AXIS2_PLACEMENT_3D('',#141773,#141774,#141775); +#141773 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.8)); +#141774 = DIRECTION('',(-1.,0.,0.)); +#141775 = DIRECTION('',(0.,0.,1.)); +#141776 = ADVANCED_FACE('',(#141777),#141807,.F.); +#141777 = FACE_BOUND('',#141778,.T.); +#141778 = EDGE_LOOP('',(#141779,#141780,#141781,#141782,#141783,#141784, + #141785,#141793,#141801)); +#141779 = ORIENTED_EDGE('',*,*,#138081,.F.); +#141780 = ORIENTED_EDGE('',*,*,#141292,.T.); +#141781 = ORIENTED_EDGE('',*,*,#141181,.F.); +#141782 = ORIENTED_EDGE('',*,*,#141155,.T.); +#141783 = ORIENTED_EDGE('',*,*,#141400,.T.); +#141784 = ORIENTED_EDGE('',*,*,#141765,.T.); +#141785 = ORIENTED_EDGE('',*,*,#141786,.T.); +#141786 = EDGE_CURVE('',#141758,#141787,#141789,.T.); +#141787 = VERTEX_POINT('',#141788); +#141788 = CARTESIAN_POINT('',(6.974593017338,4.4662,-8.77692161964)); +#141789 = LINE('',#141790,#141791); +#141790 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.235553196642)); +#141791 = VECTOR('',#141792,1.); +#141792 = DIRECTION('',(0.617381680017,0.,0.786663753569)); +#141793 = ORIENTED_EDGE('',*,*,#141794,.T.); +#141794 = EDGE_CURVE('',#141787,#141795,#141797,.T.); +#141795 = VERTEX_POINT('',#141796); +#141796 = CARTESIAN_POINT('',(7.665294039299,4.4662,-8.77692161964)); +#141797 = LINE('',#141798,#141799); +#141798 = CARTESIAN_POINT('',(6.974593017338,4.4662,-8.77692161964)); +#141799 = VECTOR('',#141800,1.); +#141800 = DIRECTION('',(1.,0.,0.)); +#141801 = ORIENTED_EDGE('',*,*,#141802,.T.); +#141802 = EDGE_CURVE('',#141795,#138082,#141803,.T.); +#141803 = LINE('',#141804,#141805); +#141804 = CARTESIAN_POINT('',(7.665294039299,4.4662,-8.77692161964)); +#141805 = VECTOR('',#141806,1.); +#141806 = DIRECTION('',(0.,0.,-1.)); +#141807 = PLANE('',#141808); +#141808 = AXIS2_PLACEMENT_3D('',#141809,#141810,#141811); +#141809 = CARTESIAN_POINT('',(6.,4.4662,-11.2)); +#141810 = DIRECTION('',(0.,-1.,0.)); +#141811 = DIRECTION('',(0.,0.,-1.)); +#141812 = ADVANCED_FACE('',(#141813),#141831,.T.); +#141813 = FACE_BOUND('',#141814,.T.); +#141814 = EDGE_LOOP('',(#141815,#141816,#141817,#141825)); +#141815 = ORIENTED_EDGE('',*,*,#138089,.F.); +#141816 = ORIENTED_EDGE('',*,*,#141802,.F.); +#141817 = ORIENTED_EDGE('',*,*,#141818,.T.); +#141818 = EDGE_CURVE('',#141795,#141819,#141821,.T.); +#141819 = VERTEX_POINT('',#141820); +#141820 = CARTESIAN_POINT('',(7.665294039299,3.35479153112, + -8.77692161964)); +#141821 = LINE('',#141822,#141823); +#141822 = CARTESIAN_POINT('',(7.665294039299,4.4662,-8.77692161964)); +#141823 = VECTOR('',#141824,1.); +#141824 = DIRECTION('',(0.,-1.,0.)); +#141825 = ORIENTED_EDGE('',*,*,#141826,.T.); +#141826 = EDGE_CURVE('',#141819,#138090,#141827,.T.); +#141827 = LINE('',#141828,#141829); +#141828 = CARTESIAN_POINT('',(7.665294039299,3.35479153112, + -8.77692161964)); +#141829 = VECTOR('',#141830,1.); +#141830 = DIRECTION('',(0.,0.,-1.)); +#141831 = PLANE('',#141832); +#141832 = AXIS2_PLACEMENT_3D('',#141833,#141834,#141835); +#141833 = CARTESIAN_POINT('',(7.665294039299,4.4662,-11.2)); +#141834 = DIRECTION('',(1.,0.,0.)); +#141835 = DIRECTION('',(-0.,1.,0.)); +#141836 = ADVANCED_FACE('',(#141837),#141858,.T.); +#141837 = FACE_BOUND('',#141838,.T.); +#141838 = EDGE_LOOP('',(#141839,#141840,#141841,#141842,#141850,#141856, + #141857)); +#141839 = ORIENTED_EDGE('',*,*,#141139,.F.); +#141840 = ORIENTED_EDGE('',*,*,#138097,.F.); +#141841 = ORIENTED_EDGE('',*,*,#141826,.F.); +#141842 = ORIENTED_EDGE('',*,*,#141843,.F.); +#141843 = EDGE_CURVE('',#141844,#141819,#141846,.T.); +#141844 = VERTEX_POINT('',#141845); +#141845 = CARTESIAN_POINT('',(6.974593017338,3.35479153112, + -8.77692161964)); +#141846 = LINE('',#141847,#141848); +#141847 = CARTESIAN_POINT('',(6.974593017338,3.35479153112, + -8.77692161964)); +#141848 = VECTOR('',#141849,1.); +#141849 = DIRECTION('',(1.,0.,0.)); +#141850 = ORIENTED_EDGE('',*,*,#141851,.F.); +#141851 = EDGE_CURVE('',#141750,#141844,#141852,.T.); +#141852 = LINE('',#141853,#141854); +#141853 = CARTESIAN_POINT('',(6.614654311337,3.35479153112, + -9.235553196642)); +#141854 = VECTOR('',#141855,1.); +#141855 = DIRECTION('',(0.617381680017,0.,0.786663753569)); +#141856 = ORIENTED_EDGE('',*,*,#141749,.F.); +#141857 = ORIENTED_EDGE('',*,*,#141409,.T.); +#141858 = PLANE('',#141859); +#141859 = AXIS2_PLACEMENT_3D('',#141860,#141861,#141862); +#141860 = CARTESIAN_POINT('',(7.665294039299,3.35479153112,-11.2)); +#141861 = DIRECTION('',(0.,-1.,0.)); +#141862 = DIRECTION('',(0.,0.,-1.)); +#141863 = ADVANCED_FACE('',(#141864),#141875,.T.); +#141864 = FACE_BOUND('',#141865,.T.); +#141865 = EDGE_LOOP('',(#141866,#141867,#141868,#141874)); +#141866 = ORIENTED_EDGE('',*,*,#141757,.T.); +#141867 = ORIENTED_EDGE('',*,*,#141851,.T.); +#141868 = ORIENTED_EDGE('',*,*,#141869,.F.); +#141869 = EDGE_CURVE('',#141787,#141844,#141870,.T.); +#141870 = LINE('',#141871,#141872); +#141871 = CARTESIAN_POINT('',(6.974593017338,4.4662,-8.77692161964)); +#141872 = VECTOR('',#141873,1.); +#141873 = DIRECTION('',(0.,-1.,0.)); +#141874 = ORIENTED_EDGE('',*,*,#141786,.F.); +#141875 = PLANE('',#141876); +#141876 = AXIS2_PLACEMENT_3D('',#141877,#141878,#141879); +#141877 = CARTESIAN_POINT('',(6.614654311337,4.4662,-9.235553196642)); +#141878 = DIRECTION('',(-0.786663753569,0.,0.617381680017)); +#141879 = DIRECTION('',(0.,1.,0.)); +#141880 = ADVANCED_FACE('',(#141881),#141887,.T.); +#141881 = FACE_BOUND('',#141882,.T.); +#141882 = EDGE_LOOP('',(#141883,#141884,#141885,#141886)); +#141883 = ORIENTED_EDGE('',*,*,#141869,.T.); +#141884 = ORIENTED_EDGE('',*,*,#141843,.T.); +#141885 = ORIENTED_EDGE('',*,*,#141818,.F.); +#141886 = ORIENTED_EDGE('',*,*,#141794,.F.); +#141887 = PLANE('',#141888); +#141888 = AXIS2_PLACEMENT_3D('',#141889,#141890,#141891); +#141889 = CARTESIAN_POINT('',(6.974593017338,4.4662,-8.77692161964)); +#141890 = DIRECTION('',(0.,0.,1.)); +#141891 = DIRECTION('',(1.,0.,-0.)); +#141892 = ADVANCED_FACE('',(#141893),#141918,.F.); +#141893 = FACE_BOUND('',#141894,.T.); +#141894 = EDGE_LOOP('',(#141895,#141905,#141911,#141912)); +#141895 = ORIENTED_EDGE('',*,*,#141896,.T.); +#141896 = EDGE_CURVE('',#141897,#141899,#141901,.T.); +#141897 = VERTEX_POINT('',#141898); +#141898 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.235553196642)); +#141899 = VERTEX_POINT('',#141900); +#141900 = CARTESIAN_POINT('',(6.614654311337,-3.35479153112, + -9.235553196642)); +#141901 = LINE('',#141902,#141903); +#141902 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.235553196642)); +#141903 = VECTOR('',#141904,1.); +#141904 = DIRECTION('',(0.,1.,0.)); +#141905 = ORIENTED_EDGE('',*,*,#141906,.F.); +#141906 = EDGE_CURVE('',#141432,#141899,#141907,.T.); +#141907 = LINE('',#141908,#141909); +#141908 = CARTESIAN_POINT('',(6.614654311337,-3.35479153112,-9.8)); +#141909 = VECTOR('',#141910,1.); +#141910 = DIRECTION('',(0.,0.,1.)); +#141911 = ORIENTED_EDGE('',*,*,#141448,.F.); +#141912 = ORIENTED_EDGE('',*,*,#141913,.T.); +#141913 = EDGE_CURVE('',#141441,#141897,#141914,.T.); +#141914 = LINE('',#141915,#141916); +#141915 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.8)); +#141916 = VECTOR('',#141917,1.); +#141917 = DIRECTION('',(0.,0.,1.)); +#141918 = PLANE('',#141919); +#141919 = AXIS2_PLACEMENT_3D('',#141920,#141921,#141922); +#141920 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.8)); +#141921 = DIRECTION('',(1.,0.,0.)); +#141922 = DIRECTION('',(-0.,1.,0.)); +#141923 = ADVANCED_FACE('',(#141924),#141959,.F.); +#141924 = FACE_BOUND('',#141925,.T.); +#141925 = EDGE_LOOP('',(#141926,#141927,#141928,#141934,#141935,#141943, + #141951,#141957,#141958)); +#141926 = ORIENTED_EDGE('',*,*,#141093,.F.); +#141927 = ORIENTED_EDGE('',*,*,#141220,.F.); +#141928 = ORIENTED_EDGE('',*,*,#141929,.F.); +#141929 = EDGE_CURVE('',#138349,#141213,#141930,.T.); +#141930 = LINE('',#141931,#141932); +#141931 = CARTESIAN_POINT('',(4.4662,-4.4662,-11.2)); +#141932 = VECTOR('',#141933,1.); +#141933 = DIRECTION('',(0.,0.,1.)); +#141934 = ORIENTED_EDGE('',*,*,#138348,.F.); +#141935 = ORIENTED_EDGE('',*,*,#141936,.T.); +#141936 = EDGE_CURVE('',#138341,#141937,#141939,.T.); +#141937 = VERTEX_POINT('',#141938); +#141938 = CARTESIAN_POINT('',(7.665294039299,-4.4662,-8.77692161964)); +#141939 = LINE('',#141940,#141941); +#141940 = CARTESIAN_POINT('',(7.665294039299,-4.4662,-11.2)); +#141941 = VECTOR('',#141942,1.); +#141942 = DIRECTION('',(0.,0.,1.)); +#141943 = ORIENTED_EDGE('',*,*,#141944,.F.); +#141944 = EDGE_CURVE('',#141945,#141937,#141947,.T.); +#141945 = VERTEX_POINT('',#141946); +#141946 = CARTESIAN_POINT('',(6.974593017338,-4.4662,-8.77692161964)); +#141947 = LINE('',#141948,#141949); +#141948 = CARTESIAN_POINT('',(6.974593017338,-4.4662,-8.77692161964)); +#141949 = VECTOR('',#141950,1.); +#141950 = DIRECTION('',(1.,0.,0.)); +#141951 = ORIENTED_EDGE('',*,*,#141952,.F.); +#141952 = EDGE_CURVE('',#141897,#141945,#141953,.T.); +#141953 = LINE('',#141954,#141955); +#141954 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.235553196642)); +#141955 = VECTOR('',#141956,1.); +#141956 = DIRECTION('',(0.617381680017,0.,0.786663753569)); +#141957 = ORIENTED_EDGE('',*,*,#141913,.F.); +#141958 = ORIENTED_EDGE('',*,*,#141440,.T.); +#141959 = PLANE('',#141960); +#141960 = AXIS2_PLACEMENT_3D('',#141961,#141962,#141963); +#141961 = CARTESIAN_POINT('',(4.4662,-4.4662,-11.2)); +#141962 = DIRECTION('',(-0.,1.,0.)); +#141963 = DIRECTION('',(1.,0.,0.)); +#141964 = ADVANCED_FACE('',(#141965),#141983,.F.); +#141965 = FACE_BOUND('',#141966,.T.); +#141966 = EDGE_LOOP('',(#141967,#141975,#141981,#141982)); +#141967 = ORIENTED_EDGE('',*,*,#141968,.T.); +#141968 = EDGE_CURVE('',#141945,#141969,#141971,.T.); +#141969 = VERTEX_POINT('',#141970); +#141970 = CARTESIAN_POINT('',(6.974593017338,-3.35479153112, + -8.77692161964)); +#141971 = LINE('',#141972,#141973); +#141972 = CARTESIAN_POINT('',(6.974593017338,-4.4662,-8.77692161964)); +#141973 = VECTOR('',#141974,1.); +#141974 = DIRECTION('',(0.,1.,0.)); +#141975 = ORIENTED_EDGE('',*,*,#141976,.F.); +#141976 = EDGE_CURVE('',#141899,#141969,#141977,.T.); +#141977 = LINE('',#141978,#141979); +#141978 = CARTESIAN_POINT('',(6.614654311337,-3.35479153112, + -9.235553196642)); +#141979 = VECTOR('',#141980,1.); +#141980 = DIRECTION('',(0.617381680017,0.,0.786663753569)); +#141981 = ORIENTED_EDGE('',*,*,#141896,.F.); +#141982 = ORIENTED_EDGE('',*,*,#141952,.T.); +#141983 = PLANE('',#141984); +#141984 = AXIS2_PLACEMENT_3D('',#141985,#141986,#141987); +#141985 = CARTESIAN_POINT('',(6.614654311337,-4.4662,-9.235553196642)); +#141986 = DIRECTION('',(0.786663753569,0.,-0.617381680017)); +#141987 = DIRECTION('',(0.,-1.,0.)); +#141988 = ADVANCED_FACE('',(#141989),#142010,.T.); +#141989 = FACE_BOUND('',#141990,.T.); +#141990 = EDGE_LOOP('',(#141991,#141992,#141993,#141994,#141995,#141996, + #142004)); +#141991 = ORIENTED_EDGE('',*,*,#138332,.F.); +#141992 = ORIENTED_EDGE('',*,*,#141109,.T.); +#141993 = ORIENTED_EDGE('',*,*,#141431,.T.); +#141994 = ORIENTED_EDGE('',*,*,#141906,.T.); +#141995 = ORIENTED_EDGE('',*,*,#141976,.T.); +#141996 = ORIENTED_EDGE('',*,*,#141997,.T.); +#141997 = EDGE_CURVE('',#141969,#141998,#142000,.T.); +#141998 = VERTEX_POINT('',#141999); +#141999 = CARTESIAN_POINT('',(7.665294039299,-3.35479153112, + -8.77692161964)); +#142000 = LINE('',#142001,#142002); +#142001 = CARTESIAN_POINT('',(6.974593017338,-3.35479153112, + -8.77692161964)); +#142002 = VECTOR('',#142003,1.); +#142003 = DIRECTION('',(1.,0.,0.)); +#142004 = ORIENTED_EDGE('',*,*,#142005,.F.); +#142005 = EDGE_CURVE('',#138333,#141998,#142006,.T.); +#142006 = LINE('',#142007,#142008); +#142007 = CARTESIAN_POINT('',(7.665294039299,-3.35479153112,-11.2)); +#142008 = VECTOR('',#142009,1.); +#142009 = DIRECTION('',(0.,0.,1.)); +#142010 = PLANE('',#142011); +#142011 = AXIS2_PLACEMENT_3D('',#142012,#142013,#142014); +#142012 = CARTESIAN_POINT('',(6.,-3.35479153112,-11.2)); +#142013 = DIRECTION('',(-0.,1.,0.)); +#142014 = DIRECTION('',(1.,0.,0.)); +#142015 = ADVANCED_FACE('',(#142016),#142027,.T.); +#142016 = FACE_BOUND('',#142017,.T.); +#142017 = EDGE_LOOP('',(#142018,#142019,#142020,#142026)); +#142018 = ORIENTED_EDGE('',*,*,#138340,.F.); +#142019 = ORIENTED_EDGE('',*,*,#142005,.T.); +#142020 = ORIENTED_EDGE('',*,*,#142021,.F.); +#142021 = EDGE_CURVE('',#141937,#141998,#142022,.T.); +#142022 = LINE('',#142023,#142024); +#142023 = CARTESIAN_POINT('',(7.665294039299,-4.4662,-8.77692161964)); +#142024 = VECTOR('',#142025,1.); +#142025 = DIRECTION('',(0.,1.,0.)); +#142026 = ORIENTED_EDGE('',*,*,#141936,.F.); +#142027 = PLANE('',#142028); +#142028 = AXIS2_PLACEMENT_3D('',#142029,#142030,#142031); +#142029 = CARTESIAN_POINT('',(7.665294039299,-3.35479153112,-11.2)); +#142030 = DIRECTION('',(1.,0.,0.)); +#142031 = DIRECTION('',(-0.,1.,0.)); +#142032 = ADVANCED_FACE('',(#142033),#142039,.F.); +#142033 = FACE_BOUND('',#142034,.T.); +#142034 = EDGE_LOOP('',(#142035,#142036,#142037,#142038)); +#142035 = ORIENTED_EDGE('',*,*,#142021,.T.); +#142036 = ORIENTED_EDGE('',*,*,#141997,.F.); +#142037 = ORIENTED_EDGE('',*,*,#141968,.F.); +#142038 = ORIENTED_EDGE('',*,*,#141944,.T.); +#142039 = PLANE('',#142040); +#142040 = AXIS2_PLACEMENT_3D('',#142041,#142042,#142043); +#142041 = CARTESIAN_POINT('',(6.974593017338,-4.4662,-8.77692161964)); +#142042 = DIRECTION('',(0.,0.,-1.)); +#142043 = DIRECTION('',(0.,-1.,0.)); +#142044 = ADVANCED_FACE('',(#142045),#142056,.F.); +#142045 = FACE_BOUND('',#142046,.T.); +#142046 = EDGE_LOOP('',(#142047,#142048,#142049,#142055)); +#142047 = ORIENTED_EDGE('',*,*,#141929,.T.); +#142048 = ORIENTED_EDGE('',*,*,#141212,.F.); +#142049 = ORIENTED_EDGE('',*,*,#142050,.F.); +#142050 = EDGE_CURVE('',#138357,#141205,#142051,.T.); +#142051 = LINE('',#142052,#142053); +#142052 = CARTESIAN_POINT('',(4.4662,-6.,-11.2)); +#142053 = VECTOR('',#142054,1.); +#142054 = DIRECTION('',(0.,0.,1.)); +#142055 = ORIENTED_EDGE('',*,*,#138356,.T.); +#142056 = PLANE('',#142057); +#142057 = AXIS2_PLACEMENT_3D('',#142058,#142059,#142060); +#142058 = CARTESIAN_POINT('',(4.4662,-6.,-11.2)); +#142059 = DIRECTION('',(-1.,0.,0.)); +#142060 = DIRECTION('',(0.,0.,1.)); +#142061 = ADVANCED_FACE('',(#142062),#142164,.T.); +#142062 = FACE_BOUND('',#142063,.T.); +#142063 = EDGE_LOOP('',(#142064,#142074,#142082,#142090,#142098,#142104, + #142105,#142106,#142107,#142108,#142109,#142110,#142111,#142117, + #142118,#142126,#142134,#142142,#142150,#142158)); +#142064 = ORIENTED_EDGE('',*,*,#142065,.F.); +#142065 = EDGE_CURVE('',#142066,#142068,#142070,.T.); +#142066 = VERTEX_POINT('',#142067); +#142067 = CARTESIAN_POINT('',(2.9,-6.,-9.7)); +#142068 = VERTEX_POINT('',#142069); +#142069 = CARTESIAN_POINT('',(2.9,-6.,-7.55)); +#142070 = LINE('',#142071,#142072); +#142071 = CARTESIAN_POINT('',(2.9,-6.,-9.7)); +#142072 = VECTOR('',#142073,1.); +#142073 = DIRECTION('',(0.,0.,1.)); +#142074 = ORIENTED_EDGE('',*,*,#142075,.F.); +#142075 = EDGE_CURVE('',#142076,#142066,#142078,.T.); +#142076 = VERTEX_POINT('',#142077); +#142077 = CARTESIAN_POINT('',(3.25,-6.,-9.7)); +#142078 = LINE('',#142079,#142080); +#142079 = CARTESIAN_POINT('',(3.25,-6.,-9.7)); +#142080 = VECTOR('',#142081,1.); +#142081 = DIRECTION('',(-1.,0.,0.)); +#142082 = ORIENTED_EDGE('',*,*,#142083,.F.); +#142083 = EDGE_CURVE('',#142084,#142076,#142086,.T.); +#142084 = VERTEX_POINT('',#142085); +#142085 = CARTESIAN_POINT('',(3.25,-6.,-8.9)); +#142086 = LINE('',#142087,#142088); +#142087 = CARTESIAN_POINT('',(3.25,-6.,-8.9)); +#142088 = VECTOR('',#142089,1.); +#142089 = DIRECTION('',(0.,0.,-1.)); +#142090 = ORIENTED_EDGE('',*,*,#142091,.F.); +#142091 = EDGE_CURVE('',#142092,#142084,#142094,.T.); +#142092 = VERTEX_POINT('',#142093); +#142093 = CARTESIAN_POINT('',(4.3,-6.,-8.9)); +#142094 = LINE('',#142095,#142096); +#142095 = CARTESIAN_POINT('',(4.3,-6.,-8.9)); +#142096 = VECTOR('',#142097,1.); +#142097 = DIRECTION('',(-1.,0.,0.)); +#142098 = ORIENTED_EDGE('',*,*,#142099,.F.); +#142099 = EDGE_CURVE('',#138365,#142092,#142100,.T.); +#142100 = LINE('',#142101,#142102); +#142101 = CARTESIAN_POINT('',(4.3,-6.,-11.2)); +#142102 = VECTOR('',#142103,1.); +#142103 = DIRECTION('',(0.,0.,1.)); +#142104 = ORIENTED_EDGE('',*,*,#138364,.F.); +#142105 = ORIENTED_EDGE('',*,*,#142050,.T.); +#142106 = ORIENTED_EDGE('',*,*,#141204,.F.); +#142107 = ORIENTED_EDGE('',*,*,#141077,.T.); +#142108 = ORIENTED_EDGE('',*,*,#140206,.F.); +#142109 = ORIENTED_EDGE('',*,*,#139856,.F.); +#142110 = ORIENTED_EDGE('',*,*,#141251,.F.); +#142111 = ORIENTED_EDGE('',*,*,#142112,.F.); +#142112 = EDGE_CURVE('',#138415,#141244,#142113,.T.); +#142113 = LINE('',#142114,#142115); +#142114 = CARTESIAN_POINT('',(-4.4662,-6.,-11.2)); +#142115 = VECTOR('',#142116,1.); +#142116 = DIRECTION('',(0.,0.,1.)); +#142117 = ORIENTED_EDGE('',*,*,#138414,.F.); +#142118 = ORIENTED_EDGE('',*,*,#142119,.T.); +#142119 = EDGE_CURVE('',#138407,#142120,#142122,.T.); +#142120 = VERTEX_POINT('',#142121); +#142121 = CARTESIAN_POINT('',(-4.3,-6.,-8.9)); +#142122 = LINE('',#142123,#142124); +#142123 = CARTESIAN_POINT('',(-4.3,-6.,-11.2)); +#142124 = VECTOR('',#142125,1.); +#142125 = DIRECTION('',(0.,0.,1.)); +#142126 = ORIENTED_EDGE('',*,*,#142127,.F.); +#142127 = EDGE_CURVE('',#142128,#142120,#142130,.T.); +#142128 = VERTEX_POINT('',#142129); +#142129 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#142130 = LINE('',#142131,#142132); +#142131 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#142132 = VECTOR('',#142133,1.); +#142133 = DIRECTION('',(-1.,-1.09964947201E-14,0.)); +#142134 = ORIENTED_EDGE('',*,*,#142135,.T.); +#142135 = EDGE_CURVE('',#142128,#142136,#142138,.T.); +#142136 = VERTEX_POINT('',#142137); +#142137 = CARTESIAN_POINT('',(-3.25,-6.,-9.7)); +#142138 = LINE('',#142139,#142140); +#142139 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#142140 = VECTOR('',#142141,1.); +#142141 = DIRECTION('',(0.,0.,-1.)); +#142142 = ORIENTED_EDGE('',*,*,#142143,.F.); +#142143 = EDGE_CURVE('',#142144,#142136,#142146,.T.); +#142144 = VERTEX_POINT('',#142145); +#142145 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#142146 = LINE('',#142147,#142148); +#142147 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#142148 = VECTOR('',#142149,1.); +#142149 = DIRECTION('',(-1.,0.,0.)); +#142150 = ORIENTED_EDGE('',*,*,#142151,.T.); +#142151 = EDGE_CURVE('',#142144,#142152,#142154,.T.); +#142152 = VERTEX_POINT('',#142153); +#142153 = CARTESIAN_POINT('',(-2.9,-6.,-7.55)); +#142154 = LINE('',#142155,#142156); +#142155 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#142156 = VECTOR('',#142157,1.); +#142157 = DIRECTION('',(0.,0.,1.)); +#142158 = ORIENTED_EDGE('',*,*,#142159,.T.); +#142159 = EDGE_CURVE('',#142152,#142068,#142160,.T.); +#142160 = LINE('',#142161,#142162); +#142161 = CARTESIAN_POINT('',(-2.9,-6.,-7.55)); +#142162 = VECTOR('',#142163,1.); +#142163 = DIRECTION('',(1.,0.,0.)); +#142164 = PLANE('',#142165); +#142165 = AXIS2_PLACEMENT_3D('',#142166,#142167,#142168); +#142166 = CARTESIAN_POINT('',(6.,-6.,-11.2)); +#142167 = DIRECTION('',(0.,-1.,0.)); +#142168 = DIRECTION('',(0.,0.,-1.)); +#142169 = ADVANCED_FACE('',(#142170),#142195,.T.); +#142170 = FACE_BOUND('',#142171,.T.); +#142171 = EDGE_LOOP('',(#142172,#142180,#142181,#142189)); +#142172 = ORIENTED_EDGE('',*,*,#142173,.T.); +#142173 = EDGE_CURVE('',#142174,#142068,#142176,.T.); +#142174 = VERTEX_POINT('',#142175); +#142175 = CARTESIAN_POINT('',(2.9,-6.075,-7.55)); +#142176 = LINE('',#142177,#142178); +#142177 = CARTESIAN_POINT('',(2.9,-6.075,-7.55)); +#142178 = VECTOR('',#142179,1.); +#142179 = DIRECTION('',(0.,1.,1.184237892934E-14)); +#142180 = ORIENTED_EDGE('',*,*,#142159,.F.); +#142181 = ORIENTED_EDGE('',*,*,#142182,.T.); +#142182 = EDGE_CURVE('',#142152,#142183,#142185,.T.); +#142183 = VERTEX_POINT('',#142184); +#142184 = CARTESIAN_POINT('',(-2.9,-6.075,-7.55)); +#142185 = LINE('',#142186,#142187); +#142186 = CARTESIAN_POINT('',(-2.9,-6.,-7.55)); +#142187 = VECTOR('',#142188,1.); +#142188 = DIRECTION('',(0.,-1.,0.)); +#142189 = ORIENTED_EDGE('',*,*,#142190,.T.); +#142190 = EDGE_CURVE('',#142183,#142174,#142191,.T.); +#142191 = LINE('',#142192,#142193); +#142192 = CARTESIAN_POINT('',(-2.9,-6.075,-7.55)); +#142193 = VECTOR('',#142194,1.); +#142194 = DIRECTION('',(1.,0.,0.)); +#142195 = PLANE('',#142196); +#142196 = AXIS2_PLACEMENT_3D('',#142197,#142198,#142199); +#142197 = CARTESIAN_POINT('',(0.,0.,-7.55)); +#142198 = DIRECTION('',(0.,0.,1.)); +#142199 = DIRECTION('',(1.,0.,-0.)); +#142200 = ADVANCED_FACE('',(#142201),#142288,.T.); +#142201 = FACE_BOUND('',#142202,.T.); +#142202 = EDGE_LOOP('',(#142203,#142214,#142223,#142231,#142239,#142248, + #142256,#142265,#142273,#142281)); +#142203 = ORIENTED_EDGE('',*,*,#142204,.F.); +#142204 = EDGE_CURVE('',#142205,#142207,#142209,.T.); +#142205 = VERTEX_POINT('',#142206); +#142206 = CARTESIAN_POINT('',(-1.45,-8.0942,-7.55)); +#142207 = VERTEX_POINT('',#142208); +#142208 = CARTESIAN_POINT('',(1.45,-8.0942,-7.55)); +#142209 = CIRCLE('',#142210,1.45); +#142210 = AXIS2_PLACEMENT_3D('',#142211,#142212,#142213); +#142211 = CARTESIAN_POINT('',(0.,-8.0942,-7.55)); +#142212 = DIRECTION('',(0.,0.,1.)); +#142213 = DIRECTION('',(-1.,0.,0.)); +#142214 = ORIENTED_EDGE('',*,*,#142215,.F.); +#142215 = EDGE_CURVE('',#142216,#142205,#142218,.T.); +#142216 = VERTEX_POINT('',#142217); +#142217 = CARTESIAN_POINT('',(-1.353857954144,-7.575,-7.55)); +#142218 = CIRCLE('',#142219,1.45); +#142219 = AXIS2_PLACEMENT_3D('',#142220,#142221,#142222); +#142220 = CARTESIAN_POINT('',(0.,-8.0942,-7.55)); +#142221 = DIRECTION('',(0.,0.,1.)); +#142222 = DIRECTION('',(-0.933695140789,0.358068965517,0.)); +#142223 = ORIENTED_EDGE('',*,*,#142224,.F.); +#142224 = EDGE_CURVE('',#142225,#142216,#142227,.T.); +#142225 = VERTEX_POINT('',#142226); +#142226 = CARTESIAN_POINT('',(-2.9,-7.575,-7.55)); +#142227 = LINE('',#142228,#142229); +#142228 = CARTESIAN_POINT('',(-2.9,-7.575,-7.55)); +#142229 = VECTOR('',#142230,1.); +#142230 = DIRECTION('',(1.,0.,0.)); +#142231 = ORIENTED_EDGE('',*,*,#142232,.T.); +#142232 = EDGE_CURVE('',#142225,#142233,#142235,.T.); +#142233 = VERTEX_POINT('',#142234); +#142234 = CARTESIAN_POINT('',(-2.9,-10.0942,-7.55)); +#142235 = LINE('',#142236,#142237); +#142236 = CARTESIAN_POINT('',(-2.9,-7.575,-7.55)); +#142237 = VECTOR('',#142238,1.); +#142238 = DIRECTION('',(0.,-1.,0.)); +#142239 = ORIENTED_EDGE('',*,*,#142240,.T.); +#142240 = EDGE_CURVE('',#142233,#142241,#142243,.T.); +#142241 = VERTEX_POINT('',#142242); +#142242 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.55)); +#142243 = CIRCLE('',#142244,0.5); +#142244 = AXIS2_PLACEMENT_3D('',#142245,#142246,#142247); +#142245 = CARTESIAN_POINT('',(-2.4,-10.0942,-7.55)); +#142246 = DIRECTION('',(0.,0.,1.)); +#142247 = DIRECTION('',(-1.,0.,0.)); +#142248 = ORIENTED_EDGE('',*,*,#142249,.T.); +#142249 = EDGE_CURVE('',#142241,#142250,#142252,.T.); +#142250 = VERTEX_POINT('',#142251); +#142251 = CARTESIAN_POINT('',(2.4,-10.5942,-7.55)); +#142252 = LINE('',#142253,#142254); +#142253 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.55)); +#142254 = VECTOR('',#142255,1.); +#142255 = DIRECTION('',(1.,0.,0.)); +#142256 = ORIENTED_EDGE('',*,*,#142257,.T.); +#142257 = EDGE_CURVE('',#142250,#142258,#142260,.T.); +#142258 = VERTEX_POINT('',#142259); +#142259 = CARTESIAN_POINT('',(2.9,-10.0942,-7.55)); +#142260 = CIRCLE('',#142261,0.5); +#142261 = AXIS2_PLACEMENT_3D('',#142262,#142263,#142264); +#142262 = CARTESIAN_POINT('',(2.4,-10.0942,-7.55)); +#142263 = DIRECTION('',(0.,0.,1.)); +#142264 = DIRECTION('',(0.,-1.,0.)); +#142265 = ORIENTED_EDGE('',*,*,#142266,.T.); +#142266 = EDGE_CURVE('',#142258,#142267,#142269,.T.); +#142267 = VERTEX_POINT('',#142268); +#142268 = CARTESIAN_POINT('',(2.9,-7.575,-7.55)); +#142269 = LINE('',#142270,#142271); +#142270 = CARTESIAN_POINT('',(2.9,-10.0942,-7.55)); +#142271 = VECTOR('',#142272,1.); +#142272 = DIRECTION('',(0.,1.,0.)); +#142273 = ORIENTED_EDGE('',*,*,#142274,.F.); +#142274 = EDGE_CURVE('',#142275,#142267,#142277,.T.); +#142275 = VERTEX_POINT('',#142276); +#142276 = CARTESIAN_POINT('',(1.353857954144,-7.575,-7.55)); +#142277 = LINE('',#142278,#142279); +#142278 = CARTESIAN_POINT('',(1.353857954144,-7.575,-7.55)); +#142279 = VECTOR('',#142280,1.); +#142280 = DIRECTION('',(1.,0.,0.)); +#142281 = ORIENTED_EDGE('',*,*,#142282,.F.); +#142282 = EDGE_CURVE('',#142207,#142275,#142283,.T.); +#142283 = CIRCLE('',#142284,1.45); +#142284 = AXIS2_PLACEMENT_3D('',#142285,#142286,#142287); +#142285 = CARTESIAN_POINT('',(0.,-8.0942,-7.55)); +#142286 = DIRECTION('',(0.,0.,1.)); +#142287 = DIRECTION('',(1.,0.,-0.)); +#142288 = PLANE('',#142289); +#142289 = AXIS2_PLACEMENT_3D('',#142290,#142291,#142292); +#142290 = CARTESIAN_POINT('',(0.,0.,-7.55)); +#142291 = DIRECTION('',(0.,0.,1.)); +#142292 = DIRECTION('',(1.,0.,-0.)); +#142293 = ADVANCED_FACE('',(#142294),#142399,.F.); +#142294 = FACE_BOUND('',#142295,.T.); +#142295 = EDGE_LOOP('',(#142296,#142306,#142314,#142322,#142330,#142338, + #142346,#142352,#142353,#142361,#142369,#142377,#142385,#142393)); +#142296 = ORIENTED_EDGE('',*,*,#142297,.F.); +#142297 = EDGE_CURVE('',#142298,#142300,#142302,.T.); +#142298 = VERTEX_POINT('',#142299); +#142299 = CARTESIAN_POINT('',(2.4,-6.075,-1.0665)); +#142300 = VERTEX_POINT('',#142301); +#142301 = CARTESIAN_POINT('',(-2.4,-6.075,-1.0665)); +#142302 = LINE('',#142303,#142304); +#142303 = CARTESIAN_POINT('',(2.4,-6.075,-1.0665)); +#142304 = VECTOR('',#142305,1.); +#142305 = DIRECTION('',(-1.,0.,0.)); +#142306 = ORIENTED_EDGE('',*,*,#142307,.T.); +#142307 = EDGE_CURVE('',#142298,#142308,#142310,.T.); +#142308 = VERTEX_POINT('',#142309); +#142309 = CARTESIAN_POINT('',(4.3,-6.075,-2.9665)); +#142310 = LINE('',#142311,#142312); +#142311 = CARTESIAN_POINT('',(2.4,-6.075,-1.0665)); +#142312 = VECTOR('',#142313,1.); +#142313 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#142314 = ORIENTED_EDGE('',*,*,#142315,.F.); +#142315 = EDGE_CURVE('',#142316,#142308,#142318,.T.); +#142316 = VERTEX_POINT('',#142317); +#142317 = CARTESIAN_POINT('',(4.3,-6.075,-8.9)); +#142318 = LINE('',#142319,#142320); +#142319 = CARTESIAN_POINT('',(4.3,-6.075,-8.9)); +#142320 = VECTOR('',#142321,1.); +#142321 = DIRECTION('',(0.,0.,1.)); +#142322 = ORIENTED_EDGE('',*,*,#142323,.T.); +#142323 = EDGE_CURVE('',#142316,#142324,#142326,.T.); +#142324 = VERTEX_POINT('',#142325); +#142325 = CARTESIAN_POINT('',(3.25,-6.075,-8.9)); +#142326 = LINE('',#142327,#142328); +#142327 = CARTESIAN_POINT('',(4.3,-6.075,-8.9)); +#142328 = VECTOR('',#142329,1.); +#142329 = DIRECTION('',(-1.,0.,0.)); +#142330 = ORIENTED_EDGE('',*,*,#142331,.F.); +#142331 = EDGE_CURVE('',#142332,#142324,#142334,.T.); +#142332 = VERTEX_POINT('',#142333); +#142333 = CARTESIAN_POINT('',(3.25,-6.075,-9.7)); +#142334 = LINE('',#142335,#142336); +#142335 = CARTESIAN_POINT('',(3.25,-6.075,-9.7)); +#142336 = VECTOR('',#142337,1.); +#142337 = DIRECTION('',(0.,0.,1.)); +#142338 = ORIENTED_EDGE('',*,*,#142339,.F.); +#142339 = EDGE_CURVE('',#142340,#142332,#142342,.T.); +#142340 = VERTEX_POINT('',#142341); +#142341 = CARTESIAN_POINT('',(2.9,-6.075,-9.7)); +#142342 = LINE('',#142343,#142344); +#142343 = CARTESIAN_POINT('',(2.9,-6.075,-9.7)); +#142344 = VECTOR('',#142345,1.); +#142345 = DIRECTION('',(1.,0.,0.)); +#142346 = ORIENTED_EDGE('',*,*,#142347,.T.); +#142347 = EDGE_CURVE('',#142340,#142174,#142348,.T.); +#142348 = LINE('',#142349,#142350); +#142349 = CARTESIAN_POINT('',(2.9,-6.075,-9.7)); +#142350 = VECTOR('',#142351,1.); +#142351 = DIRECTION('',(0.,0.,1.)); +#142352 = ORIENTED_EDGE('',*,*,#142190,.F.); +#142353 = ORIENTED_EDGE('',*,*,#142354,.F.); +#142354 = EDGE_CURVE('',#142355,#142183,#142357,.T.); +#142355 = VERTEX_POINT('',#142356); +#142356 = CARTESIAN_POINT('',(-2.9,-6.075,-9.7)); +#142357 = LINE('',#142358,#142359); +#142358 = CARTESIAN_POINT('',(-2.9,-6.075,-9.7)); +#142359 = VECTOR('',#142360,1.); +#142360 = DIRECTION('',(0.,0.,1.)); +#142361 = ORIENTED_EDGE('',*,*,#142362,.F.); +#142362 = EDGE_CURVE('',#142363,#142355,#142365,.T.); +#142363 = VERTEX_POINT('',#142364); +#142364 = CARTESIAN_POINT('',(-3.25,-6.075,-9.7)); +#142365 = LINE('',#142366,#142367); +#142366 = CARTESIAN_POINT('',(-3.25,-6.075,-9.7)); +#142367 = VECTOR('',#142368,1.); +#142368 = DIRECTION('',(1.,0.,0.)); +#142369 = ORIENTED_EDGE('',*,*,#142370,.T.); +#142370 = EDGE_CURVE('',#142363,#142371,#142373,.T.); +#142371 = VERTEX_POINT('',#142372); +#142372 = CARTESIAN_POINT('',(-3.25,-6.075,-8.9)); +#142373 = LINE('',#142374,#142375); +#142374 = CARTESIAN_POINT('',(-3.25,-6.075,-9.7)); +#142375 = VECTOR('',#142376,1.); +#142376 = DIRECTION('',(0.,0.,1.)); +#142377 = ORIENTED_EDGE('',*,*,#142378,.T.); +#142378 = EDGE_CURVE('',#142371,#142379,#142381,.T.); +#142379 = VERTEX_POINT('',#142380); +#142380 = CARTESIAN_POINT('',(-4.3,-6.075,-8.9)); +#142381 = LINE('',#142382,#142383); +#142382 = CARTESIAN_POINT('',(-3.25,-6.075,-8.9)); +#142383 = VECTOR('',#142384,1.); +#142384 = DIRECTION('',(-1.,0.,0.)); +#142385 = ORIENTED_EDGE('',*,*,#142386,.F.); +#142386 = EDGE_CURVE('',#142387,#142379,#142389,.T.); +#142387 = VERTEX_POINT('',#142388); +#142388 = CARTESIAN_POINT('',(-4.3,-6.075,-2.9665)); +#142389 = LINE('',#142390,#142391); +#142390 = CARTESIAN_POINT('',(-4.3,-6.075,-2.9665)); +#142391 = VECTOR('',#142392,1.); +#142392 = DIRECTION('',(0.,0.,-1.)); +#142393 = ORIENTED_EDGE('',*,*,#142394,.T.); +#142394 = EDGE_CURVE('',#142387,#142300,#142395,.T.); +#142395 = LINE('',#142396,#142397); +#142396 = CARTESIAN_POINT('',(-4.3,-6.075,-2.9665)); +#142397 = VECTOR('',#142398,1.); +#142398 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#142399 = PLANE('',#142400); +#142400 = AXIS2_PLACEMENT_3D('',#142401,#142402,#142403); +#142401 = CARTESIAN_POINT('',(0.,-6.075,0.)); +#142402 = DIRECTION('',(0.,-1.,0.)); +#142403 = DIRECTION('',(0.,0.,-1.)); +#142404 = ADVANCED_FACE('',(#142405),#142430,.T.); +#142405 = FACE_BOUND('',#142406,.T.); +#142406 = EDGE_LOOP('',(#142407,#142415,#142423,#142429)); +#142407 = ORIENTED_EDGE('',*,*,#142408,.F.); +#142408 = EDGE_CURVE('',#142409,#142387,#142411,.T.); +#142409 = VERTEX_POINT('',#142410); +#142410 = CARTESIAN_POINT('',(-4.3,-7.575,-2.9665)); +#142411 = LINE('',#142412,#142413); +#142412 = CARTESIAN_POINT('',(-4.3,-7.575,-2.9665)); +#142413 = VECTOR('',#142414,1.); +#142414 = DIRECTION('',(0.,1.,0.)); +#142415 = ORIENTED_EDGE('',*,*,#142416,.F.); +#142416 = EDGE_CURVE('',#142417,#142409,#142419,.T.); +#142417 = VERTEX_POINT('',#142418); +#142418 = CARTESIAN_POINT('',(-2.4,-7.575,-1.0665)); +#142419 = LINE('',#142420,#142421); +#142420 = CARTESIAN_POINT('',(-2.4,-7.575,-1.0665)); +#142421 = VECTOR('',#142422,1.); +#142422 = DIRECTION('',(-0.707106781187,0.,-0.707106781187)); +#142423 = ORIENTED_EDGE('',*,*,#142424,.T.); +#142424 = EDGE_CURVE('',#142417,#142300,#142425,.T.); +#142425 = LINE('',#142426,#142427); +#142426 = CARTESIAN_POINT('',(-2.4,-7.575,-1.0665)); +#142427 = VECTOR('',#142428,1.); +#142428 = DIRECTION('',(0.,1.,0.)); +#142429 = ORIENTED_EDGE('',*,*,#142394,.F.); +#142430 = PLANE('',#142431); +#142431 = AXIS2_PLACEMENT_3D('',#142432,#142433,#142434); +#142432 = CARTESIAN_POINT('',(-3.35,-6.825,-2.0165)); +#142433 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#142434 = DIRECTION('',(0.,1.,0.)); +#142435 = ADVANCED_FACE('',(#142436),#142454,.T.); +#142436 = FACE_BOUND('',#142437,.T.); +#142437 = EDGE_LOOP('',(#142438,#142446,#142452,#142453)); +#142438 = ORIENTED_EDGE('',*,*,#142439,.F.); +#142439 = EDGE_CURVE('',#142440,#142417,#142442,.T.); +#142440 = VERTEX_POINT('',#142441); +#142441 = CARTESIAN_POINT('',(2.4,-7.575,-1.0665)); +#142442 = LINE('',#142443,#142444); +#142443 = CARTESIAN_POINT('',(2.4,-7.575,-1.0665)); +#142444 = VECTOR('',#142445,1.); +#142445 = DIRECTION('',(-1.,0.,0.)); +#142446 = ORIENTED_EDGE('',*,*,#142447,.T.); +#142447 = EDGE_CURVE('',#142440,#142298,#142448,.T.); +#142448 = LINE('',#142449,#142450); +#142449 = CARTESIAN_POINT('',(2.4,-7.575,-1.0665)); +#142450 = VECTOR('',#142451,1.); +#142451 = DIRECTION('',(0.,1.,0.)); +#142452 = ORIENTED_EDGE('',*,*,#142297,.T.); +#142453 = ORIENTED_EDGE('',*,*,#142424,.F.); +#142454 = PLANE('',#142455); +#142455 = AXIS2_PLACEMENT_3D('',#142456,#142457,#142458); +#142456 = CARTESIAN_POINT('',(4.3,-6.075,-1.0665)); +#142457 = DIRECTION('',(0.,0.,1.)); +#142458 = DIRECTION('',(1.,0.,-0.)); +#142459 = ADVANCED_FACE('',(#142460),#142478,.T.); +#142460 = FACE_BOUND('',#142461,.T.); +#142461 = EDGE_LOOP('',(#142462,#142463,#142471,#142477)); +#142462 = ORIENTED_EDGE('',*,*,#142447,.F.); +#142463 = ORIENTED_EDGE('',*,*,#142464,.F.); +#142464 = EDGE_CURVE('',#142465,#142440,#142467,.T.); +#142465 = VERTEX_POINT('',#142466); +#142466 = CARTESIAN_POINT('',(4.3,-7.575,-2.9665)); +#142467 = LINE('',#142468,#142469); +#142468 = CARTESIAN_POINT('',(4.3,-7.575,-2.9665)); +#142469 = VECTOR('',#142470,1.); +#142470 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#142471 = ORIENTED_EDGE('',*,*,#142472,.T.); +#142472 = EDGE_CURVE('',#142465,#142308,#142473,.T.); +#142473 = LINE('',#142474,#142475); +#142474 = CARTESIAN_POINT('',(4.3,-7.575,-2.9665)); +#142475 = VECTOR('',#142476,1.); +#142476 = DIRECTION('',(0.,1.,0.)); +#142477 = ORIENTED_EDGE('',*,*,#142307,.F.); +#142478 = PLANE('',#142479); +#142479 = AXIS2_PLACEMENT_3D('',#142480,#142481,#142482); +#142480 = CARTESIAN_POINT('',(3.35,-6.825,-2.0165)); +#142481 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#142482 = DIRECTION('',(0.,-1.,0.)); +#142483 = ADVANCED_FACE('',(#142484),#142534,.T.); +#142484 = FACE_BOUND('',#142485,.T.); +#142485 = EDGE_LOOP('',(#142486,#142496,#142504,#142510,#142511,#142512, + #142518,#142519,#142520,#142528)); +#142486 = ORIENTED_EDGE('',*,*,#142487,.F.); +#142487 = EDGE_CURVE('',#142488,#142490,#142492,.T.); +#142488 = VERTEX_POINT('',#142489); +#142489 = CARTESIAN_POINT('',(4.3,-9.575,-8.9)); +#142490 = VERTEX_POINT('',#142491); +#142491 = CARTESIAN_POINT('',(4.3,-9.575,-6.8)); +#142492 = LINE('',#142493,#142494); +#142493 = CARTESIAN_POINT('',(4.3,-9.575,-8.9)); +#142494 = VECTOR('',#142495,1.); +#142495 = DIRECTION('',(0.,0.,1.)); +#142496 = ORIENTED_EDGE('',*,*,#142497,.T.); +#142497 = EDGE_CURVE('',#142488,#142498,#142500,.T.); +#142498 = VERTEX_POINT('',#142499); +#142499 = CARTESIAN_POINT('',(4.3,-10.6,-8.9)); +#142500 = LINE('',#142501,#142502); +#142501 = CARTESIAN_POINT('',(4.3,-9.575,-8.9)); +#142502 = VECTOR('',#142503,1.); +#142503 = DIRECTION('',(0.,-1.,0.)); +#142504 = ORIENTED_EDGE('',*,*,#142505,.F.); +#142505 = EDGE_CURVE('',#138373,#142498,#142506,.T.); +#142506 = LINE('',#142507,#142508); +#142507 = CARTESIAN_POINT('',(4.3,-10.6,-11.2)); +#142508 = VECTOR('',#142509,1.); +#142509 = DIRECTION('',(0.,0.,1.)); +#142510 = ORIENTED_EDGE('',*,*,#138372,.F.); +#142511 = ORIENTED_EDGE('',*,*,#142099,.T.); +#142512 = ORIENTED_EDGE('',*,*,#142513,.T.); +#142513 = EDGE_CURVE('',#142092,#142316,#142514,.T.); +#142514 = LINE('',#142515,#142516); +#142515 = CARTESIAN_POINT('',(4.3,-6.,-8.9)); +#142516 = VECTOR('',#142517,1.); +#142517 = DIRECTION('',(-1.184237892934E-14,-1.,0.)); +#142518 = ORIENTED_EDGE('',*,*,#142315,.T.); +#142519 = ORIENTED_EDGE('',*,*,#142472,.F.); +#142520 = ORIENTED_EDGE('',*,*,#142521,.F.); +#142521 = EDGE_CURVE('',#142522,#142465,#142524,.T.); +#142522 = VERTEX_POINT('',#142523); +#142523 = CARTESIAN_POINT('',(4.3,-7.575,-4.4)); +#142524 = LINE('',#142525,#142526); +#142525 = CARTESIAN_POINT('',(4.3,-7.575,-4.4)); +#142526 = VECTOR('',#142527,1.); +#142527 = DIRECTION('',(0.,0.,1.)); +#142528 = ORIENTED_EDGE('',*,*,#142529,.T.); +#142529 = EDGE_CURVE('',#142522,#142490,#142530,.T.); +#142530 = LINE('',#142531,#142532); +#142531 = CARTESIAN_POINT('',(4.3,-7.575,-4.4)); +#142532 = VECTOR('',#142533,1.); +#142533 = DIRECTION('',(0.,-0.640184399664,-0.768221279597)); +#142534 = PLANE('',#142535); +#142535 = AXIS2_PLACEMENT_3D('',#142536,#142537,#142538); +#142536 = CARTESIAN_POINT('',(4.3,-6.,-11.2)); +#142537 = DIRECTION('',(1.,0.,0.)); +#142538 = DIRECTION('',(-0.,1.,0.)); +#142539 = ADVANCED_FACE('',(#142540),#142565,.T.); +#142540 = FACE_BOUND('',#142541,.T.); +#142541 = EDGE_LOOP('',(#142542,#142550,#142551,#142559)); +#142542 = ORIENTED_EDGE('',*,*,#142543,.F.); +#142543 = EDGE_CURVE('',#142490,#142544,#142546,.T.); +#142544 = VERTEX_POINT('',#142545); +#142545 = CARTESIAN_POINT('',(2.4,-9.575,-6.8)); +#142546 = LINE('',#142547,#142548); +#142547 = CARTESIAN_POINT('',(4.3,-9.575,-6.8)); +#142548 = VECTOR('',#142549,1.); +#142549 = DIRECTION('',(-1.,0.,0.)); +#142550 = ORIENTED_EDGE('',*,*,#142529,.F.); +#142551 = ORIENTED_EDGE('',*,*,#142552,.T.); +#142552 = EDGE_CURVE('',#142522,#142553,#142555,.T.); +#142553 = VERTEX_POINT('',#142554); +#142554 = CARTESIAN_POINT('',(2.4,-7.575,-4.4)); +#142555 = LINE('',#142556,#142557); +#142556 = CARTESIAN_POINT('',(4.3,-7.575,-4.4)); +#142557 = VECTOR('',#142558,1.); +#142558 = DIRECTION('',(-1.,0.,0.)); +#142559 = ORIENTED_EDGE('',*,*,#142560,.F.); +#142560 = EDGE_CURVE('',#142544,#142553,#142561,.T.); +#142561 = LINE('',#142562,#142563); +#142562 = CARTESIAN_POINT('',(2.4,-9.575,-6.8)); +#142563 = VECTOR('',#142564,1.); +#142564 = DIRECTION('',(0.,0.640184399664,0.768221279597)); +#142565 = PLANE('',#142566); +#142566 = AXIS2_PLACEMENT_3D('',#142567,#142568,#142569); +#142567 = CARTESIAN_POINT('',(3.35,-8.575,-5.6)); +#142568 = DIRECTION('',(0.,-0.768221279597,0.640184399664)); +#142569 = DIRECTION('',(-1.,0.,0.)); +#142570 = ADVANCED_FACE('',(#142571),#142596,.T.); +#142571 = FACE_BOUND('',#142572,.T.); +#142572 = EDGE_LOOP('',(#142573,#142581,#142589,#142595)); +#142573 = ORIENTED_EDGE('',*,*,#142574,.T.); +#142574 = EDGE_CURVE('',#142553,#142575,#142577,.T.); +#142575 = VERTEX_POINT('',#142576); +#142576 = CARTESIAN_POINT('',(2.4,-7.575,-7.266192279819)); +#142577 = LINE('',#142578,#142579); +#142578 = CARTESIAN_POINT('',(2.4,-7.575,-4.4)); +#142579 = VECTOR('',#142580,1.); +#142580 = DIRECTION('',(0.,0.,-1.)); +#142581 = ORIENTED_EDGE('',*,*,#142582,.T.); +#142582 = EDGE_CURVE('',#142575,#142583,#142585,.T.); +#142583 = VERTEX_POINT('',#142584); +#142584 = CARTESIAN_POINT('',(2.4,-9.575,-7.266192279819)); +#142585 = LINE('',#142586,#142587); +#142586 = CARTESIAN_POINT('',(2.4,-7.575,-7.266192279819)); +#142587 = VECTOR('',#142588,1.); +#142588 = DIRECTION('',(0.,-1.,0.)); +#142589 = ORIENTED_EDGE('',*,*,#142590,.F.); +#142590 = EDGE_CURVE('',#142544,#142583,#142591,.T.); +#142591 = LINE('',#142592,#142593); +#142592 = CARTESIAN_POINT('',(2.4,-9.575,-6.8)); +#142593 = VECTOR('',#142594,1.); +#142594 = DIRECTION('',(0.,0.,-1.)); +#142595 = ORIENTED_EDGE('',*,*,#142560,.T.); +#142596 = PLANE('',#142597); +#142597 = AXIS2_PLACEMENT_3D('',#142598,#142599,#142600); +#142598 = CARTESIAN_POINT('',(2.4,-7.575,-4.4)); +#142599 = DIRECTION('',(-1.,0.,0.)); +#142600 = DIRECTION('',(0.,0.,1.)); +#142601 = ADVANCED_FACE('',(#142602),#142637,.T.); +#142602 = FACE_BOUND('',#142603,.T.); +#142603 = EDGE_LOOP('',(#142604,#142605,#142613,#142621,#142629,#142635, + #142636)); +#142604 = ORIENTED_EDGE('',*,*,#142590,.T.); +#142605 = ORIENTED_EDGE('',*,*,#142606,.T.); +#142606 = EDGE_CURVE('',#142583,#142607,#142609,.T.); +#142607 = VERTEX_POINT('',#142608); +#142608 = CARTESIAN_POINT('',(3.036382958558,-9.575,-7.266192279819)); +#142609 = LINE('',#142610,#142611); +#142610 = CARTESIAN_POINT('',(2.4,-9.575,-7.266192279819)); +#142611 = VECTOR('',#142612,1.); +#142612 = DIRECTION('',(1.,0.,0.)); +#142613 = ORIENTED_EDGE('',*,*,#142614,.T.); +#142614 = EDGE_CURVE('',#142607,#142615,#142617,.T.); +#142615 = VERTEX_POINT('',#142616); +#142616 = CARTESIAN_POINT('',(3.036382958558,-9.575,-8.9)); +#142617 = LINE('',#142618,#142619); +#142618 = CARTESIAN_POINT('',(3.036382958558,-9.575,-7.266192279819)); +#142619 = VECTOR('',#142620,1.); +#142620 = DIRECTION('',(0.,0.,-1.)); +#142621 = ORIENTED_EDGE('',*,*,#142622,.T.); +#142622 = EDGE_CURVE('',#142615,#142623,#142625,.T.); +#142623 = VERTEX_POINT('',#142624); +#142624 = CARTESIAN_POINT('',(3.25,-9.575,-8.9)); +#142625 = LINE('',#142626,#142627); +#142626 = CARTESIAN_POINT('',(3.036382958558,-9.575,-8.9)); +#142627 = VECTOR('',#142628,1.); +#142628 = DIRECTION('',(1.,0.,0.)); +#142629 = ORIENTED_EDGE('',*,*,#142630,.F.); +#142630 = EDGE_CURVE('',#142488,#142623,#142631,.T.); +#142631 = LINE('',#142632,#142633); +#142632 = CARTESIAN_POINT('',(4.3,-9.575,-8.9)); +#142633 = VECTOR('',#142634,1.); +#142634 = DIRECTION('',(-1.,0.,0.)); +#142635 = ORIENTED_EDGE('',*,*,#142487,.T.); +#142636 = ORIENTED_EDGE('',*,*,#142543,.T.); +#142637 = PLANE('',#142638); +#142638 = AXIS2_PLACEMENT_3D('',#142639,#142640,#142641); +#142639 = CARTESIAN_POINT('',(0.,-9.575,0.)); +#142640 = DIRECTION('',(0.,-1.,0.)); +#142641 = DIRECTION('',(0.,0.,-1.)); +#142642 = ADVANCED_FACE('',(#142643),#142701,.T.); +#142643 = FACE_BOUND('',#142644,.T.); +#142644 = EDGE_LOOP('',(#142645,#142655,#142663,#142671,#142679,#142687, + #142695)); +#142645 = ORIENTED_EDGE('',*,*,#142646,.T.); +#142646 = EDGE_CURVE('',#142647,#142649,#142651,.T.); +#142647 = VERTEX_POINT('',#142648); +#142648 = CARTESIAN_POINT('',(-4.3,-9.575,-6.8)); +#142649 = VERTEX_POINT('',#142650); +#142650 = CARTESIAN_POINT('',(-4.3,-9.575,-8.9)); +#142651 = LINE('',#142652,#142653); +#142652 = CARTESIAN_POINT('',(-4.3,-9.575,-6.8)); +#142653 = VECTOR('',#142654,1.); +#142654 = DIRECTION('',(0.,0.,-1.)); +#142655 = ORIENTED_EDGE('',*,*,#142656,.F.); +#142656 = EDGE_CURVE('',#142657,#142649,#142659,.T.); +#142657 = VERTEX_POINT('',#142658); +#142658 = CARTESIAN_POINT('',(-3.25,-9.575,-8.9)); +#142659 = LINE('',#142660,#142661); +#142660 = CARTESIAN_POINT('',(-3.25,-9.575,-8.9)); +#142661 = VECTOR('',#142662,1.); +#142662 = DIRECTION('',(-1.,0.,0.)); +#142663 = ORIENTED_EDGE('',*,*,#142664,.T.); +#142664 = EDGE_CURVE('',#142657,#142665,#142667,.T.); +#142665 = VERTEX_POINT('',#142666); +#142666 = CARTESIAN_POINT('',(-3.036382958558,-9.575,-8.9)); +#142667 = LINE('',#142668,#142669); +#142668 = CARTESIAN_POINT('',(-3.25,-9.575,-8.9)); +#142669 = VECTOR('',#142670,1.); +#142670 = DIRECTION('',(1.,0.,0.)); +#142671 = ORIENTED_EDGE('',*,*,#142672,.T.); +#142672 = EDGE_CURVE('',#142665,#142673,#142675,.T.); +#142673 = VERTEX_POINT('',#142674); +#142674 = CARTESIAN_POINT('',(-3.036382958558,-9.575,-7.266192279819)); +#142675 = LINE('',#142676,#142677); +#142676 = CARTESIAN_POINT('',(-3.036382958558,-9.575,-8.9)); +#142677 = VECTOR('',#142678,1.); +#142678 = DIRECTION('',(0.,0.,1.)); +#142679 = ORIENTED_EDGE('',*,*,#142680,.T.); +#142680 = EDGE_CURVE('',#142673,#142681,#142683,.T.); +#142681 = VERTEX_POINT('',#142682); +#142682 = CARTESIAN_POINT('',(-2.4,-9.575,-7.266192279819)); +#142683 = LINE('',#142684,#142685); +#142684 = CARTESIAN_POINT('',(-3.036382958558,-9.575,-7.266192279819)); +#142685 = VECTOR('',#142686,1.); +#142686 = DIRECTION('',(1.,0.,0.)); +#142687 = ORIENTED_EDGE('',*,*,#142688,.T.); +#142688 = EDGE_CURVE('',#142681,#142689,#142691,.T.); +#142689 = VERTEX_POINT('',#142690); +#142690 = CARTESIAN_POINT('',(-2.4,-9.575,-6.8)); +#142691 = LINE('',#142692,#142693); +#142692 = CARTESIAN_POINT('',(-2.4,-9.575,-7.266192279819)); +#142693 = VECTOR('',#142694,1.); +#142694 = DIRECTION('',(0.,0.,1.)); +#142695 = ORIENTED_EDGE('',*,*,#142696,.T.); +#142696 = EDGE_CURVE('',#142689,#142647,#142697,.T.); +#142697 = LINE('',#142698,#142699); +#142698 = CARTESIAN_POINT('',(-2.4,-9.575,-6.8)); +#142699 = VECTOR('',#142700,1.); +#142700 = DIRECTION('',(-1.,0.,0.)); +#142701 = PLANE('',#142702); +#142702 = AXIS2_PLACEMENT_3D('',#142703,#142704,#142705); +#142703 = CARTESIAN_POINT('',(0.,-9.575,0.)); +#142704 = DIRECTION('',(0.,-1.,0.)); +#142705 = DIRECTION('',(0.,0.,-1.)); +#142706 = ADVANCED_FACE('',(#142707),#142718,.F.); +#142707 = FACE_BOUND('',#142708,.T.); +#142708 = EDGE_LOOP('',(#142709,#142710,#142711,#142717)); +#142709 = ORIENTED_EDGE('',*,*,#142513,.F.); +#142710 = ORIENTED_EDGE('',*,*,#142091,.T.); +#142711 = ORIENTED_EDGE('',*,*,#142712,.T.); +#142712 = EDGE_CURVE('',#142084,#142324,#142713,.T.); +#142713 = LINE('',#142714,#142715); +#142714 = CARTESIAN_POINT('',(3.25,-6.,-8.9)); +#142715 = VECTOR('',#142716,1.); +#142716 = DIRECTION('',(0.,-1.,0.)); +#142717 = ORIENTED_EDGE('',*,*,#142323,.F.); +#142718 = PLANE('',#142719); +#142719 = AXIS2_PLACEMENT_3D('',#142720,#142721,#142722); +#142720 = CARTESIAN_POINT('',(6.075,0.,-8.9)); +#142721 = DIRECTION('',(0.,0.,-1.)); +#142722 = DIRECTION('',(0.,-1.,0.)); +#142723 = ADVANCED_FACE('',(#142724),#142740,.F.); +#142724 = FACE_BOUND('',#142725,.T.); +#142725 = EDGE_LOOP('',(#142726,#142732,#142733,#142739)); +#142726 = ORIENTED_EDGE('',*,*,#142727,.F.); +#142727 = EDGE_CURVE('',#142128,#142371,#142728,.T.); +#142728 = LINE('',#142729,#142730); +#142729 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#142730 = VECTOR('',#142731,1.); +#142731 = DIRECTION('',(0.,-1.,0.)); +#142732 = ORIENTED_EDGE('',*,*,#142127,.T.); +#142733 = ORIENTED_EDGE('',*,*,#142734,.F.); +#142734 = EDGE_CURVE('',#142379,#142120,#142735,.T.); +#142735 = LINE('',#142736,#142737); +#142736 = CARTESIAN_POINT('',(-4.3,-6.075,-8.9)); +#142737 = VECTOR('',#142738,1.); +#142738 = DIRECTION('',(0.,1.,0.)); +#142739 = ORIENTED_EDGE('',*,*,#142378,.F.); +#142740 = PLANE('',#142741); +#142741 = AXIS2_PLACEMENT_3D('',#142742,#142743,#142744); +#142742 = CARTESIAN_POINT('',(6.075,0.,-8.9)); +#142743 = DIRECTION('',(0.,0.,-1.)); +#142744 = DIRECTION('',(0.,-1.,0.)); +#142745 = ADVANCED_FACE('',(#142746),#142805,.F.); +#142746 = FACE_BOUND('',#142747,.T.); +#142747 = EDGE_LOOP('',(#142748,#142756,#142764,#142770,#142771,#142779, + #142788,#142796,#142803,#142804)); +#142748 = ORIENTED_EDGE('',*,*,#142749,.T.); +#142749 = EDGE_CURVE('',#142623,#142750,#142752,.T.); +#142750 = VERTEX_POINT('',#142751); +#142751 = CARTESIAN_POINT('',(3.25,-10.8,-8.9)); +#142752 = LINE('',#142753,#142754); +#142753 = CARTESIAN_POINT('',(3.25,-9.575,-8.9)); +#142754 = VECTOR('',#142755,1.); +#142755 = DIRECTION('',(0.,-1.,0.)); +#142756 = ORIENTED_EDGE('',*,*,#142757,.F.); +#142757 = EDGE_CURVE('',#142758,#142750,#142760,.T.); +#142758 = VERTEX_POINT('',#142759); +#142759 = CARTESIAN_POINT('',(-3.25,-10.8,-8.9)); +#142760 = LINE('',#142761,#142762); +#142761 = CARTESIAN_POINT('',(-3.25,-10.8,-8.9)); +#142762 = VECTOR('',#142763,1.); +#142763 = DIRECTION('',(1.,0.,0.)); +#142764 = ORIENTED_EDGE('',*,*,#142765,.F.); +#142765 = EDGE_CURVE('',#142657,#142758,#142766,.T.); +#142766 = LINE('',#142767,#142768); +#142767 = CARTESIAN_POINT('',(-3.25,-9.575,-8.9)); +#142768 = VECTOR('',#142769,1.); +#142769 = DIRECTION('',(0.,-1.,0.)); +#142770 = ORIENTED_EDGE('',*,*,#142656,.T.); +#142771 = ORIENTED_EDGE('',*,*,#142772,.F.); +#142772 = EDGE_CURVE('',#142773,#142649,#142775,.T.); +#142773 = VERTEX_POINT('',#142774); +#142774 = CARTESIAN_POINT('',(-4.3,-10.6,-8.9)); +#142775 = LINE('',#142776,#142777); +#142776 = CARTESIAN_POINT('',(-4.3,-10.6,-8.9)); +#142777 = VECTOR('',#142778,1.); +#142778 = DIRECTION('',(0.,1.,0.)); +#142779 = ORIENTED_EDGE('',*,*,#142780,.T.); +#142780 = EDGE_CURVE('',#142773,#142781,#142783,.T.); +#142781 = VERTEX_POINT('',#142782); +#142782 = CARTESIAN_POINT('',(-3.3,-11.6,-8.9)); +#142783 = CIRCLE('',#142784,1.); +#142784 = AXIS2_PLACEMENT_3D('',#142785,#142786,#142787); +#142785 = CARTESIAN_POINT('',(-3.3,-10.6,-8.9)); +#142786 = DIRECTION('',(0.,0.,1.)); +#142787 = DIRECTION('',(-1.,0.,0.)); +#142788 = ORIENTED_EDGE('',*,*,#142789,.F.); +#142789 = EDGE_CURVE('',#142790,#142781,#142792,.T.); +#142790 = VERTEX_POINT('',#142791); +#142791 = CARTESIAN_POINT('',(3.3,-11.6,-8.9)); +#142792 = LINE('',#142793,#142794); +#142793 = CARTESIAN_POINT('',(3.3,-11.6,-8.9)); +#142794 = VECTOR('',#142795,1.); +#142795 = DIRECTION('',(-1.,0.,0.)); +#142796 = ORIENTED_EDGE('',*,*,#142797,.T.); +#142797 = EDGE_CURVE('',#142790,#142498,#142798,.T.); +#142798 = CIRCLE('',#142799,1.); +#142799 = AXIS2_PLACEMENT_3D('',#142800,#142801,#142802); +#142800 = CARTESIAN_POINT('',(3.3,-10.6,-8.9)); +#142801 = DIRECTION('',(0.,0.,1.)); +#142802 = DIRECTION('',(0.,-1.,0.)); +#142803 = ORIENTED_EDGE('',*,*,#142497,.F.); +#142804 = ORIENTED_EDGE('',*,*,#142630,.T.); +#142805 = PLANE('',#142806); +#142806 = AXIS2_PLACEMENT_3D('',#142807,#142808,#142809); +#142807 = CARTESIAN_POINT('',(6.075,0.,-8.9)); +#142808 = DIRECTION('',(0.,0.,-1.)); +#142809 = DIRECTION('',(0.,-1.,0.)); +#142810 = ADVANCED_FACE('',(#142811),#142822,.F.); +#142811 = FACE_BOUND('',#142812,.T.); +#142812 = EDGE_LOOP('',(#142813,#142814,#142815,#142821)); +#142813 = ORIENTED_EDGE('',*,*,#142712,.F.); +#142814 = ORIENTED_EDGE('',*,*,#142083,.T.); +#142815 = ORIENTED_EDGE('',*,*,#142816,.F.); +#142816 = EDGE_CURVE('',#142332,#142076,#142817,.T.); +#142817 = LINE('',#142818,#142819); +#142818 = CARTESIAN_POINT('',(3.25,-6.075,-9.7)); +#142819 = VECTOR('',#142820,1.); +#142820 = DIRECTION('',(0.,1.,0.)); +#142821 = ORIENTED_EDGE('',*,*,#142331,.T.); +#142822 = PLANE('',#142823); +#142823 = AXIS2_PLACEMENT_3D('',#142824,#142825,#142826); +#142824 = CARTESIAN_POINT('',(3.25,-10.8,-8.9)); +#142825 = DIRECTION('',(1.,0.,0.)); +#142826 = DIRECTION('',(-0.,1.,0.)); +#142827 = ADVANCED_FACE('',(#142828),#142861,.F.); +#142828 = FACE_BOUND('',#142829,.T.); +#142829 = EDGE_LOOP('',(#142830,#142838,#142846,#142854,#142860)); +#142830 = ORIENTED_EDGE('',*,*,#142831,.F.); +#142831 = EDGE_CURVE('',#142832,#142623,#142834,.T.); +#142832 = VERTEX_POINT('',#142833); +#142833 = CARTESIAN_POINT('',(3.25,-7.575,-8.9)); +#142834 = LINE('',#142835,#142836); +#142835 = CARTESIAN_POINT('',(3.25,-7.575,-8.9)); +#142836 = VECTOR('',#142837,1.); +#142837 = DIRECTION('',(0.,-1.,0.)); +#142838 = ORIENTED_EDGE('',*,*,#142839,.F.); +#142839 = EDGE_CURVE('',#142840,#142832,#142842,.T.); +#142840 = VERTEX_POINT('',#142841); +#142841 = CARTESIAN_POINT('',(3.25,-7.575,-9.7)); +#142842 = LINE('',#142843,#142844); +#142843 = CARTESIAN_POINT('',(3.25,-7.575,-9.7)); +#142844 = VECTOR('',#142845,1.); +#142845 = DIRECTION('',(0.,0.,1.)); +#142846 = ORIENTED_EDGE('',*,*,#142847,.F.); +#142847 = EDGE_CURVE('',#142848,#142840,#142850,.T.); +#142848 = VERTEX_POINT('',#142849); +#142849 = CARTESIAN_POINT('',(3.25,-10.8,-9.7)); +#142850 = LINE('',#142851,#142852); +#142851 = CARTESIAN_POINT('',(3.25,-10.8,-9.7)); +#142852 = VECTOR('',#142853,1.); +#142853 = DIRECTION('',(0.,1.,0.)); +#142854 = ORIENTED_EDGE('',*,*,#142855,.F.); +#142855 = EDGE_CURVE('',#142750,#142848,#142856,.T.); +#142856 = LINE('',#142857,#142858); +#142857 = CARTESIAN_POINT('',(3.25,-10.8,-8.9)); +#142858 = VECTOR('',#142859,1.); +#142859 = DIRECTION('',(0.,0.,-1.)); +#142860 = ORIENTED_EDGE('',*,*,#142749,.F.); +#142861 = PLANE('',#142862); +#142862 = AXIS2_PLACEMENT_3D('',#142863,#142864,#142865); +#142863 = CARTESIAN_POINT('',(3.25,-10.8,-8.9)); +#142864 = DIRECTION('',(1.,0.,0.)); +#142865 = DIRECTION('',(-0.,1.,0.)); +#142866 = ADVANCED_FACE('',(#142867),#142883,.T.); +#142867 = FACE_BOUND('',#142868,.T.); +#142868 = EDGE_LOOP('',(#142869,#142875,#142876,#142882)); +#142869 = ORIENTED_EDGE('',*,*,#142870,.F.); +#142870 = EDGE_CURVE('',#142144,#142355,#142871,.T.); +#142871 = LINE('',#142872,#142873); +#142872 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#142873 = VECTOR('',#142874,1.); +#142874 = DIRECTION('',(0.,-1.,0.)); +#142875 = ORIENTED_EDGE('',*,*,#142143,.T.); +#142876 = ORIENTED_EDGE('',*,*,#142877,.T.); +#142877 = EDGE_CURVE('',#142136,#142363,#142878,.T.); +#142878 = LINE('',#142879,#142880); +#142879 = CARTESIAN_POINT('',(-3.25,-6.,-9.7)); +#142880 = VECTOR('',#142881,1.); +#142881 = DIRECTION('',(0.,-1.,0.)); +#142882 = ORIENTED_EDGE('',*,*,#142362,.T.); +#142883 = PLANE('',#142884); +#142884 = AXIS2_PLACEMENT_3D('',#142885,#142886,#142887); +#142885 = CARTESIAN_POINT('',(0.,0.,-9.7)); +#142886 = DIRECTION('',(0.,0.,1.)); +#142887 = DIRECTION('',(1.,0.,-0.)); +#142888 = ADVANCED_FACE('',(#142889),#142900,.T.); +#142889 = FACE_BOUND('',#142890,.T.); +#142890 = EDGE_LOOP('',(#142891,#142892,#142893,#142899)); +#142891 = ORIENTED_EDGE('',*,*,#142816,.T.); +#142892 = ORIENTED_EDGE('',*,*,#142075,.T.); +#142893 = ORIENTED_EDGE('',*,*,#142894,.T.); +#142894 = EDGE_CURVE('',#142066,#142340,#142895,.T.); +#142895 = LINE('',#142896,#142897); +#142896 = CARTESIAN_POINT('',(2.9,-6.,-9.7)); +#142897 = VECTOR('',#142898,1.); +#142898 = DIRECTION('',(0.,-1.,0.)); +#142899 = ORIENTED_EDGE('',*,*,#142339,.T.); +#142900 = PLANE('',#142901); +#142901 = AXIS2_PLACEMENT_3D('',#142902,#142903,#142904); +#142902 = CARTESIAN_POINT('',(0.,0.,-9.7)); +#142903 = DIRECTION('',(0.,0.,1.)); +#142904 = DIRECTION('',(1.,0.,-0.)); +#142905 = ADVANCED_FACE('',(#142906),#142981,.T.); +#142906 = FACE_BOUND('',#142907,.T.); +#142907 = EDGE_LOOP('',(#142908,#142918,#142924,#142925,#142933,#142941, + #142950,#142958,#142967,#142975)); +#142908 = ORIENTED_EDGE('',*,*,#142909,.T.); +#142909 = EDGE_CURVE('',#142910,#142912,#142914,.T.); +#142910 = VERTEX_POINT('',#142911); +#142911 = CARTESIAN_POINT('',(-3.25,-7.575,-9.7)); +#142912 = VERTEX_POINT('',#142913); +#142913 = CARTESIAN_POINT('',(-3.25,-10.8,-9.7)); +#142914 = LINE('',#142915,#142916); +#142915 = CARTESIAN_POINT('',(-3.25,-7.575,-9.7)); +#142916 = VECTOR('',#142917,1.); +#142917 = DIRECTION('',(0.,-1.,0.)); +#142918 = ORIENTED_EDGE('',*,*,#142919,.T.); +#142919 = EDGE_CURVE('',#142912,#142848,#142920,.T.); +#142920 = LINE('',#142921,#142922); +#142921 = CARTESIAN_POINT('',(-3.25,-10.8,-9.7)); +#142922 = VECTOR('',#142923,1.); +#142923 = DIRECTION('',(1.,0.,0.)); +#142924 = ORIENTED_EDGE('',*,*,#142847,.T.); +#142925 = ORIENTED_EDGE('',*,*,#142926,.F.); +#142926 = EDGE_CURVE('',#142927,#142840,#142929,.T.); +#142927 = VERTEX_POINT('',#142928); +#142928 = CARTESIAN_POINT('',(2.9,-7.575,-9.7)); +#142929 = LINE('',#142930,#142931); +#142930 = CARTESIAN_POINT('',(2.9,-7.575,-9.7)); +#142931 = VECTOR('',#142932,1.); +#142932 = DIRECTION('',(1.,0.,0.)); +#142933 = ORIENTED_EDGE('',*,*,#142934,.T.); +#142934 = EDGE_CURVE('',#142927,#142935,#142937,.T.); +#142935 = VERTEX_POINT('',#142936); +#142936 = CARTESIAN_POINT('',(2.9,-10.0942,-9.7)); +#142937 = LINE('',#142938,#142939); +#142938 = CARTESIAN_POINT('',(2.9,-7.575,-9.7)); +#142939 = VECTOR('',#142940,1.); +#142940 = DIRECTION('',(0.,-1.,0.)); +#142941 = ORIENTED_EDGE('',*,*,#142942,.T.); +#142942 = EDGE_CURVE('',#142935,#142943,#142945,.T.); +#142943 = VERTEX_POINT('',#142944); +#142944 = CARTESIAN_POINT('',(2.4,-10.5942,-9.7)); +#142945 = CIRCLE('',#142946,0.5); +#142946 = AXIS2_PLACEMENT_3D('',#142947,#142948,#142949); +#142947 = CARTESIAN_POINT('',(2.4,-10.0942,-9.7)); +#142948 = DIRECTION('',(0.,0.,-1.)); +#142949 = DIRECTION('',(1.,0.,0.)); +#142950 = ORIENTED_EDGE('',*,*,#142951,.F.); +#142951 = EDGE_CURVE('',#142952,#142943,#142954,.T.); +#142952 = VERTEX_POINT('',#142953); +#142953 = CARTESIAN_POINT('',(-2.4,-10.5942,-9.7)); +#142954 = LINE('',#142955,#142956); +#142955 = CARTESIAN_POINT('',(-2.4,-10.5942,-9.7)); +#142956 = VECTOR('',#142957,1.); +#142957 = DIRECTION('',(1.,0.,0.)); +#142958 = ORIENTED_EDGE('',*,*,#142959,.T.); +#142959 = EDGE_CURVE('',#142952,#142960,#142962,.T.); +#142960 = VERTEX_POINT('',#142961); +#142961 = CARTESIAN_POINT('',(-2.9,-10.0942,-9.7)); +#142962 = CIRCLE('',#142963,0.5); +#142963 = AXIS2_PLACEMENT_3D('',#142964,#142965,#142966); +#142964 = CARTESIAN_POINT('',(-2.4,-10.0942,-9.7)); +#142965 = DIRECTION('',(0.,0.,-1.)); +#142966 = DIRECTION('',(0.,-1.,0.)); +#142967 = ORIENTED_EDGE('',*,*,#142968,.F.); +#142968 = EDGE_CURVE('',#142969,#142960,#142971,.T.); +#142969 = VERTEX_POINT('',#142970); +#142970 = CARTESIAN_POINT('',(-2.9,-7.575,-9.7)); +#142971 = LINE('',#142972,#142973); +#142972 = CARTESIAN_POINT('',(-2.9,-7.575,-9.7)); +#142973 = VECTOR('',#142974,1.); +#142974 = DIRECTION('',(0.,-1.,0.)); +#142975 = ORIENTED_EDGE('',*,*,#142976,.F.); +#142976 = EDGE_CURVE('',#142910,#142969,#142977,.T.); +#142977 = LINE('',#142978,#142979); +#142978 = CARTESIAN_POINT('',(-3.25,-7.575,-9.7)); +#142979 = VECTOR('',#142980,1.); +#142980 = DIRECTION('',(1.,0.,0.)); +#142981 = PLANE('',#142982); +#142982 = AXIS2_PLACEMENT_3D('',#142983,#142984,#142985); +#142983 = CARTESIAN_POINT('',(0.,0.,-9.7)); +#142984 = DIRECTION('',(0.,0.,1.)); +#142985 = DIRECTION('',(1.,0.,-0.)); +#142986 = ADVANCED_FACE('',(#142987),#142993,.F.); +#142987 = FACE_BOUND('',#142988,.T.); +#142988 = EDGE_LOOP('',(#142989,#142990,#142991,#142992)); +#142989 = ORIENTED_EDGE('',*,*,#142877,.F.); +#142990 = ORIENTED_EDGE('',*,*,#142135,.F.); +#142991 = ORIENTED_EDGE('',*,*,#142727,.T.); +#142992 = ORIENTED_EDGE('',*,*,#142370,.F.); +#142993 = PLANE('',#142994); +#142994 = AXIS2_PLACEMENT_3D('',#142995,#142996,#142997); +#142995 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#142996 = DIRECTION('',(-1.,0.,0.)); +#142997 = DIRECTION('',(0.,0.,1.)); +#142998 = ADVANCED_FACE('',(#142999),#143023,.F.); +#142999 = FACE_BOUND('',#143000,.T.); +#143000 = EDGE_LOOP('',(#143001,#143009,#143010,#143016,#143017)); +#143001 = ORIENTED_EDGE('',*,*,#143002,.T.); +#143002 = EDGE_CURVE('',#143003,#142657,#143005,.T.); +#143003 = VERTEX_POINT('',#143004); +#143004 = CARTESIAN_POINT('',(-3.25,-7.575,-8.9)); +#143005 = LINE('',#143006,#143007); +#143006 = CARTESIAN_POINT('',(-3.25,-7.575,-8.9)); +#143007 = VECTOR('',#143008,1.); +#143008 = DIRECTION('',(0.,-1.,0.)); +#143009 = ORIENTED_EDGE('',*,*,#142765,.T.); +#143010 = ORIENTED_EDGE('',*,*,#143011,.T.); +#143011 = EDGE_CURVE('',#142758,#142912,#143012,.T.); +#143012 = LINE('',#143013,#143014); +#143013 = CARTESIAN_POINT('',(-3.25,-10.8,-8.9)); +#143014 = VECTOR('',#143015,1.); +#143015 = DIRECTION('',(0.,0.,-1.)); +#143016 = ORIENTED_EDGE('',*,*,#142909,.F.); +#143017 = ORIENTED_EDGE('',*,*,#143018,.T.); +#143018 = EDGE_CURVE('',#142910,#143003,#143019,.T.); +#143019 = LINE('',#143020,#143021); +#143020 = CARTESIAN_POINT('',(-3.25,-7.575,-9.7)); +#143021 = VECTOR('',#143022,1.); +#143022 = DIRECTION('',(0.,0.,1.)); +#143023 = PLANE('',#143024); +#143024 = AXIS2_PLACEMENT_3D('',#143025,#143026,#143027); +#143025 = CARTESIAN_POINT('',(-3.25,-6.,-8.9)); +#143026 = DIRECTION('',(-1.,0.,0.)); +#143027 = DIRECTION('',(0.,0.,1.)); +#143028 = ADVANCED_FACE('',(#143029),#143244,.T.); +#143029 = FACE_BOUND('',#143030,.T.); +#143030 = EDGE_LOOP('',(#143031,#143032,#143033,#143034,#143035,#143043, + #143051,#143059,#143067,#143075,#143081,#143082,#143083,#143089, + #143090,#143098,#143106,#143114,#143122,#143130,#143136,#143137, + #143148,#143154,#143155,#143165,#143173,#143181,#143189,#143197, + #143205,#143211,#143212,#143218,#143219,#143220,#143228,#143236, + #143242,#143243)); +#143031 = ORIENTED_EDGE('',*,*,#142521,.T.); +#143032 = ORIENTED_EDGE('',*,*,#142464,.T.); +#143033 = ORIENTED_EDGE('',*,*,#142439,.T.); +#143034 = ORIENTED_EDGE('',*,*,#142416,.T.); +#143035 = ORIENTED_EDGE('',*,*,#143036,.T.); +#143036 = EDGE_CURVE('',#142409,#143037,#143039,.T.); +#143037 = VERTEX_POINT('',#143038); +#143038 = CARTESIAN_POINT('',(-4.3,-7.575,-4.4)); +#143039 = LINE('',#143040,#143041); +#143040 = CARTESIAN_POINT('',(-4.3,-7.575,-2.9665)); +#143041 = VECTOR('',#143042,1.); +#143042 = DIRECTION('',(0.,0.,-1.)); +#143043 = ORIENTED_EDGE('',*,*,#143044,.F.); +#143044 = EDGE_CURVE('',#143045,#143037,#143047,.T.); +#143045 = VERTEX_POINT('',#143046); +#143046 = CARTESIAN_POINT('',(-2.4,-7.575,-4.4)); +#143047 = LINE('',#143048,#143049); +#143048 = CARTESIAN_POINT('',(-2.4,-7.575,-4.4)); +#143049 = VECTOR('',#143050,1.); +#143050 = DIRECTION('',(-1.,0.,0.)); +#143051 = ORIENTED_EDGE('',*,*,#143052,.F.); +#143052 = EDGE_CURVE('',#143053,#143045,#143055,.T.); +#143053 = VERTEX_POINT('',#143054); +#143054 = CARTESIAN_POINT('',(-2.4,-7.575,-7.266192279819)); +#143055 = LINE('',#143056,#143057); +#143056 = CARTESIAN_POINT('',(-2.4,-7.575,-7.266192279819)); +#143057 = VECTOR('',#143058,1.); +#143058 = DIRECTION('',(0.,0.,1.)); +#143059 = ORIENTED_EDGE('',*,*,#143060,.F.); +#143060 = EDGE_CURVE('',#143061,#143053,#143063,.T.); +#143061 = VERTEX_POINT('',#143062); +#143062 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-7.266192279819)); +#143063 = LINE('',#143064,#143065); +#143064 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-7.266192279819)); +#143065 = VECTOR('',#143066,1.); +#143066 = DIRECTION('',(1.,0.,0.)); +#143067 = ORIENTED_EDGE('',*,*,#143068,.F.); +#143068 = EDGE_CURVE('',#143069,#143061,#143071,.T.); +#143069 = VERTEX_POINT('',#143070); +#143070 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-8.9)); +#143071 = LINE('',#143072,#143073); +#143072 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-8.9)); +#143073 = VECTOR('',#143074,1.); +#143074 = DIRECTION('',(0.,0.,1.)); +#143075 = ORIENTED_EDGE('',*,*,#143076,.F.); +#143076 = EDGE_CURVE('',#143003,#143069,#143077,.T.); +#143077 = LINE('',#143078,#143079); +#143078 = CARTESIAN_POINT('',(-3.25,-7.575,-8.9)); +#143079 = VECTOR('',#143080,1.); +#143080 = DIRECTION('',(1.,-1.663122780288E-14,0.)); +#143081 = ORIENTED_EDGE('',*,*,#143018,.F.); +#143082 = ORIENTED_EDGE('',*,*,#142976,.T.); +#143083 = ORIENTED_EDGE('',*,*,#143084,.T.); +#143084 = EDGE_CURVE('',#142969,#142225,#143085,.T.); +#143085 = LINE('',#143086,#143087); +#143086 = CARTESIAN_POINT('',(-2.9,-7.575,-9.7)); +#143087 = VECTOR('',#143088,1.); +#143088 = DIRECTION('',(0.,0.,1.)); +#143089 = ORIENTED_EDGE('',*,*,#142224,.T.); +#143090 = ORIENTED_EDGE('',*,*,#143091,.T.); +#143091 = EDGE_CURVE('',#142216,#143092,#143094,.T.); +#143092 = VERTEX_POINT('',#143093); +#143093 = CARTESIAN_POINT('',(-1.353857954144,-7.575,-7.53)); +#143094 = LINE('',#143095,#143096); +#143095 = CARTESIAN_POINT('',(-1.353857954144,-7.575,-7.55)); +#143096 = VECTOR('',#143097,1.); +#143097 = DIRECTION('',(0.,0.,1.)); +#143098 = ORIENTED_EDGE('',*,*,#143099,.F.); +#143099 = EDGE_CURVE('',#143100,#143092,#143102,.T.); +#143100 = VERTEX_POINT('',#143101); +#143101 = CARTESIAN_POINT('',(-1.407277996701,-7.575,-7.53)); +#143102 = LINE('',#143103,#143104); +#143103 = CARTESIAN_POINT('',(-1.407277996701,-7.575,-7.53)); +#143104 = VECTOR('',#143105,1.); +#143105 = DIRECTION('',(1.,0.,1.662631434169E-14)); +#143106 = ORIENTED_EDGE('',*,*,#143107,.F.); +#143107 = EDGE_CURVE('',#143108,#143100,#143110,.T.); +#143108 = VERTEX_POINT('',#143109); +#143109 = CARTESIAN_POINT('',(-2.9,-7.575,-7.53)); +#143110 = LINE('',#143111,#143112); +#143111 = CARTESIAN_POINT('',(-2.9,-7.575,-7.53)); +#143112 = VECTOR('',#143113,1.); +#143113 = DIRECTION('',(1.,0.,0.)); +#143114 = ORIENTED_EDGE('',*,*,#143115,.T.); +#143115 = EDGE_CURVE('',#143108,#143116,#143118,.T.); +#143116 = VERTEX_POINT('',#143117); +#143117 = CARTESIAN_POINT('',(-2.9,-7.575,-7.33)); +#143118 = LINE('',#143119,#143120); +#143119 = CARTESIAN_POINT('',(-2.9,-7.575,-7.53)); +#143120 = VECTOR('',#143121,1.); +#143121 = DIRECTION('',(0.,0.,1.)); +#143122 = ORIENTED_EDGE('',*,*,#143123,.T.); +#143123 = EDGE_CURVE('',#143116,#143124,#143126,.T.); +#143124 = VERTEX_POINT('',#143125); +#143125 = CARTESIAN_POINT('',(-1.407277996701,-7.575,-7.33)); +#143126 = LINE('',#143127,#143128); +#143127 = CARTESIAN_POINT('',(-2.9,-7.575,-7.33)); +#143128 = VECTOR('',#143129,1.); +#143129 = DIRECTION('',(1.,0.,0.)); +#143130 = ORIENTED_EDGE('',*,*,#143131,.T.); +#143131 = EDGE_CURVE('',#143124,#136143,#143132,.T.); +#143132 = LINE('',#143133,#143134); +#143133 = CARTESIAN_POINT('',(-1.407277996701,-7.575,-7.33)); +#143134 = VECTOR('',#143135,1.); +#143135 = DIRECTION('',(1.,1.418720745768E-14,-5.036458647478E-12)); +#143136 = ORIENTED_EDGE('',*,*,#136203,.T.); +#143137 = ORIENTED_EDGE('',*,*,#143138,.T.); +#143138 = EDGE_CURVE('',#136195,#143139,#143141,.T.); +#143139 = VERTEX_POINT('',#143140); +#143140 = CARTESIAN_POINT('',(-1.144639246571,-7.575,-6.05)); +#143141 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#143142,#143143,#143144, + #143145,#143146,#143147),.UNSPECIFIED.,.F.,.F.,(4,2,4),(0.,0.5,1.), + .UNSPECIFIED.); +#143142 = CARTESIAN_POINT('',(-1.253350323409,-7.574999999879, + -6.142875294956)); +#143143 = CARTESIAN_POINT('',(-1.251395109319,-7.575,-6.117586268514)); +#143144 = CARTESIAN_POINT('',(-1.240835567147,-7.575,-6.096332273583)); +#143145 = CARTESIAN_POINT('',(-1.199583110323,-7.575,-6.059266454925)); +#143146 = CARTESIAN_POINT('',(-1.174393079602,-7.575,-6.050000000174)); +#143147 = CARTESIAN_POINT('',(-1.144639246571,-7.575,-6.05)); +#143148 = ORIENTED_EDGE('',*,*,#143149,.T.); +#143149 = EDGE_CURVE('',#143139,#136297,#143150,.T.); +#143150 = LINE('',#143151,#143152); +#143151 = CARTESIAN_POINT('',(-1.144639246571,-7.575,-6.05)); +#143152 = VECTOR('',#143153,1.); +#143153 = DIRECTION('',(1.,-2.992048365147E-12,0.)); +#143154 = ORIENTED_EDGE('',*,*,#136315,.T.); +#143155 = ORIENTED_EDGE('',*,*,#143156,.F.); +#143156 = EDGE_CURVE('',#143157,#136307,#143159,.T.); +#143157 = VERTEX_POINT('',#143158); +#143158 = CARTESIAN_POINT('',(1.344673821613,-7.575,-7.33)); +#143159 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#143160,#143161,#143162, + #143163,#143164),.UNSPECIFIED.,.F.,.F.,(4,1,4),(0.,0.5,1.), + .QUASI_UNIFORM_KNOTS.); +#143160 = CARTESIAN_POINT('',(1.344673821613,-7.575,-7.33)); +#143161 = CARTESIAN_POINT('',(1.328809353114,-7.575,-7.122805899166)); +#143162 = CARTESIAN_POINT('',(1.297722675338,-7.574999999978, + -6.717757804892)); +#143163 = CARTESIAN_POINT('',(1.267925250614,-7.575000000044, + -6.331389565418)); +#143164 = CARTESIAN_POINT('',(1.253350323413,-7.574999999889, + -6.142875294959)); +#143165 = ORIENTED_EDGE('',*,*,#143166,.T.); +#143166 = EDGE_CURVE('',#143157,#143167,#143169,.T.); +#143167 = VERTEX_POINT('',#143168); +#143168 = CARTESIAN_POINT('',(1.407277996701,-7.575,-7.33)); +#143169 = LINE('',#143170,#143171); +#143170 = CARTESIAN_POINT('',(1.344673821613,-7.575,-7.33)); +#143171 = VECTOR('',#143172,1.); +#143172 = DIRECTION('',(1.,0.,0.)); +#143173 = ORIENTED_EDGE('',*,*,#143174,.T.); +#143174 = EDGE_CURVE('',#143167,#143175,#143177,.T.); +#143175 = VERTEX_POINT('',#143176); +#143176 = CARTESIAN_POINT('',(2.9,-7.575,-7.33)); +#143177 = LINE('',#143178,#143179); +#143178 = CARTESIAN_POINT('',(1.407277996701,-7.575,-7.33)); +#143179 = VECTOR('',#143180,1.); +#143180 = DIRECTION('',(1.,0.,0.)); +#143181 = ORIENTED_EDGE('',*,*,#143182,.F.); +#143182 = EDGE_CURVE('',#143183,#143175,#143185,.T.); +#143183 = VERTEX_POINT('',#143184); +#143184 = CARTESIAN_POINT('',(2.9,-7.575,-7.53)); +#143185 = LINE('',#143186,#143187); +#143186 = CARTESIAN_POINT('',(2.9,-7.575,-7.53)); +#143187 = VECTOR('',#143188,1.); +#143188 = DIRECTION('',(0.,0.,1.)); +#143189 = ORIENTED_EDGE('',*,*,#143190,.F.); +#143190 = EDGE_CURVE('',#143191,#143183,#143193,.T.); +#143191 = VERTEX_POINT('',#143192); +#143192 = CARTESIAN_POINT('',(1.407277996701,-7.575,-7.53)); +#143193 = LINE('',#143194,#143195); +#143194 = CARTESIAN_POINT('',(1.407277996701,-7.575,-7.53)); +#143195 = VECTOR('',#143196,1.); +#143196 = DIRECTION('',(1.,0.,0.)); +#143197 = ORIENTED_EDGE('',*,*,#143198,.F.); +#143198 = EDGE_CURVE('',#143199,#143191,#143201,.T.); +#143199 = VERTEX_POINT('',#143200); +#143200 = CARTESIAN_POINT('',(1.353857954144,-7.575,-7.53)); +#143201 = LINE('',#143202,#143203); +#143202 = CARTESIAN_POINT('',(1.353857954144,-7.575,-7.53)); +#143203 = VECTOR('',#143204,1.); +#143204 = DIRECTION('',(1.,0.,-1.662631434169E-14)); +#143205 = ORIENTED_EDGE('',*,*,#143206,.F.); +#143206 = EDGE_CURVE('',#142275,#143199,#143207,.T.); +#143207 = LINE('',#143208,#143209); +#143208 = CARTESIAN_POINT('',(1.353857954144,-7.575,-7.55)); +#143209 = VECTOR('',#143210,1.); +#143210 = DIRECTION('',(0.,0.,1.)); +#143211 = ORIENTED_EDGE('',*,*,#142274,.T.); +#143212 = ORIENTED_EDGE('',*,*,#143213,.F.); +#143213 = EDGE_CURVE('',#142927,#142267,#143214,.T.); +#143214 = LINE('',#143215,#143216); +#143215 = CARTESIAN_POINT('',(2.9,-7.575,-9.7)); +#143216 = VECTOR('',#143217,1.); +#143217 = DIRECTION('',(0.,0.,1.)); +#143218 = ORIENTED_EDGE('',*,*,#142926,.T.); +#143219 = ORIENTED_EDGE('',*,*,#142839,.T.); +#143220 = ORIENTED_EDGE('',*,*,#143221,.T.); +#143221 = EDGE_CURVE('',#142832,#143222,#143224,.T.); +#143222 = VERTEX_POINT('',#143223); +#143223 = CARTESIAN_POINT('',(3.036382958558,-7.575,-8.9)); +#143224 = LINE('',#143225,#143226); +#143225 = CARTESIAN_POINT('',(3.25,-7.575,-8.9)); +#143226 = VECTOR('',#143227,1.); +#143227 = DIRECTION('',(-1.,0.,0.)); +#143228 = ORIENTED_EDGE('',*,*,#143229,.F.); +#143229 = EDGE_CURVE('',#143230,#143222,#143232,.T.); +#143230 = VERTEX_POINT('',#143231); +#143231 = CARTESIAN_POINT('',(3.036382958558,-7.575,-7.266192279819)); +#143232 = LINE('',#143233,#143234); +#143233 = CARTESIAN_POINT('',(3.036382958558,-7.575,-7.266192279819)); +#143234 = VECTOR('',#143235,1.); +#143235 = DIRECTION('',(0.,0.,-1.)); +#143236 = ORIENTED_EDGE('',*,*,#143237,.F.); +#143237 = EDGE_CURVE('',#142575,#143230,#143238,.T.); +#143238 = LINE('',#143239,#143240); +#143239 = CARTESIAN_POINT('',(2.4,-7.575,-7.266192279819)); +#143240 = VECTOR('',#143241,1.); +#143241 = DIRECTION('',(1.,0.,0.)); +#143242 = ORIENTED_EDGE('',*,*,#142574,.F.); +#143243 = ORIENTED_EDGE('',*,*,#142552,.F.); +#143244 = PLANE('',#143245); +#143245 = AXIS2_PLACEMENT_3D('',#143246,#143247,#143248); +#143246 = CARTESIAN_POINT('',(0.,-7.575,0.)); +#143247 = DIRECTION('',(0.,-1.,0.)); +#143248 = DIRECTION('',(0.,0.,-1.)); +#143249 = ADVANCED_FACE('',(#143250),#143261,.T.); +#143250 = FACE_BOUND('',#143251,.T.); +#143251 = EDGE_LOOP('',(#143252,#143258,#143259,#143260)); +#143252 = ORIENTED_EDGE('',*,*,#143253,.T.); +#143253 = EDGE_CURVE('',#143230,#142607,#143254,.T.); +#143254 = LINE('',#143255,#143256); +#143255 = CARTESIAN_POINT('',(3.036382958558,-7.575,-7.266192279819)); +#143256 = VECTOR('',#143257,1.); +#143257 = DIRECTION('',(0.,-1.,0.)); +#143258 = ORIENTED_EDGE('',*,*,#142606,.F.); +#143259 = ORIENTED_EDGE('',*,*,#142582,.F.); +#143260 = ORIENTED_EDGE('',*,*,#143237,.T.); +#143261 = PLANE('',#143262); +#143262 = AXIS2_PLACEMENT_3D('',#143263,#143264,#143265); +#143263 = CARTESIAN_POINT('',(2.4,-7.575,-7.266192279819)); +#143264 = DIRECTION('',(0.,0.,-1.)); +#143265 = DIRECTION('',(0.,-1.,0.)); +#143266 = ADVANCED_FACE('',(#143267),#143278,.T.); +#143267 = FACE_BOUND('',#143268,.T.); +#143268 = EDGE_LOOP('',(#143269,#143275,#143276,#143277)); +#143269 = ORIENTED_EDGE('',*,*,#143270,.T.); +#143270 = EDGE_CURVE('',#143222,#142615,#143271,.T.); +#143271 = LINE('',#143272,#143273); +#143272 = CARTESIAN_POINT('',(3.036382958558,-7.575,-8.9)); +#143273 = VECTOR('',#143274,1.); +#143274 = DIRECTION('',(0.,-1.,0.)); +#143275 = ORIENTED_EDGE('',*,*,#142614,.F.); +#143276 = ORIENTED_EDGE('',*,*,#143253,.F.); +#143277 = ORIENTED_EDGE('',*,*,#143229,.T.); +#143278 = PLANE('',#143279); +#143279 = AXIS2_PLACEMENT_3D('',#143280,#143281,#143282); +#143280 = CARTESIAN_POINT('',(3.036382958558,-7.575,-7.266192279819)); +#143281 = DIRECTION('',(-1.,0.,0.)); +#143282 = DIRECTION('',(0.,0.,1.)); +#143283 = ADVANCED_FACE('',(#143284),#143290,.T.); +#143284 = FACE_BOUND('',#143285,.T.); +#143285 = EDGE_LOOP('',(#143286,#143287,#143288,#143289)); +#143286 = ORIENTED_EDGE('',*,*,#142622,.F.); +#143287 = ORIENTED_EDGE('',*,*,#143270,.F.); +#143288 = ORIENTED_EDGE('',*,*,#143221,.F.); +#143289 = ORIENTED_EDGE('',*,*,#142831,.T.); +#143290 = PLANE('',#143291); +#143291 = AXIS2_PLACEMENT_3D('',#143292,#143293,#143294); +#143292 = CARTESIAN_POINT('',(3.036382958558,-7.575,-8.9)); +#143293 = DIRECTION('',(0.,0.,-1.)); +#143294 = DIRECTION('',(0.,-1.,0.)); +#143295 = ADVANCED_FACE('',(#143296),#143302,.T.); +#143296 = FACE_BOUND('',#143297,.T.); +#143297 = EDGE_LOOP('',(#143298,#143299,#143300,#143301)); +#143298 = ORIENTED_EDGE('',*,*,#142894,.F.); +#143299 = ORIENTED_EDGE('',*,*,#142065,.T.); +#143300 = ORIENTED_EDGE('',*,*,#142173,.F.); +#143301 = ORIENTED_EDGE('',*,*,#142347,.F.); +#143302 = PLANE('',#143303); +#143303 = AXIS2_PLACEMENT_3D('',#143304,#143305,#143306); +#143304 = CARTESIAN_POINT('',(2.9,-10.5942,-9.7)); +#143305 = DIRECTION('',(1.,0.,0.)); +#143306 = DIRECTION('',(-0.,1.,0.)); +#143307 = ADVANCED_FACE('',(#143308),#143319,.T.); +#143308 = FACE_BOUND('',#143309,.T.); +#143309 = EDGE_LOOP('',(#143310,#143311,#143317,#143318)); +#143310 = ORIENTED_EDGE('',*,*,#142266,.F.); +#143311 = ORIENTED_EDGE('',*,*,#143312,.T.); +#143312 = EDGE_CURVE('',#142258,#142935,#143313,.T.); +#143313 = LINE('',#143314,#143315); +#143314 = CARTESIAN_POINT('',(2.9,-10.0942,-7.55)); +#143315 = VECTOR('',#143316,1.); +#143316 = DIRECTION('',(0.,0.,-1.)); +#143317 = ORIENTED_EDGE('',*,*,#142934,.F.); +#143318 = ORIENTED_EDGE('',*,*,#143213,.T.); +#143319 = PLANE('',#143320); +#143320 = AXIS2_PLACEMENT_3D('',#143321,#143322,#143323); +#143321 = CARTESIAN_POINT('',(2.9,-10.5942,-9.7)); +#143322 = DIRECTION('',(1.,0.,0.)); +#143323 = DIRECTION('',(-0.,1.,0.)); +#143324 = ADVANCED_FACE('',(#143325),#143336,.T.); +#143325 = FACE_BOUND('',#143326,.T.); +#143326 = EDGE_LOOP('',(#143327,#143328,#143329,#143330)); +#143327 = ORIENTED_EDGE('',*,*,#142942,.F.); +#143328 = ORIENTED_EDGE('',*,*,#143312,.F.); +#143329 = ORIENTED_EDGE('',*,*,#142257,.F.); +#143330 = ORIENTED_EDGE('',*,*,#143331,.T.); +#143331 = EDGE_CURVE('',#142250,#142943,#143332,.T.); +#143332 = LINE('',#143333,#143334); +#143333 = CARTESIAN_POINT('',(2.4,-10.5942,-7.55)); +#143334 = VECTOR('',#143335,1.); +#143335 = DIRECTION('',(0.,0.,-1.)); +#143336 = CYLINDRICAL_SURFACE('',#143337,0.5); +#143337 = AXIS2_PLACEMENT_3D('',#143338,#143339,#143340); +#143338 = CARTESIAN_POINT('',(2.4,-10.0942,8.1806)); +#143339 = DIRECTION('',(0.,0.,-1.)); +#143340 = DIRECTION('',(1.,0.,0.)); +#143341 = ADVANCED_FACE('',(#143342),#143353,.T.); +#143342 = FACE_BOUND('',#143343,.T.); +#143343 = EDGE_LOOP('',(#143344,#143345,#143346,#143347)); +#143344 = ORIENTED_EDGE('',*,*,#142951,.T.); +#143345 = ORIENTED_EDGE('',*,*,#143331,.F.); +#143346 = ORIENTED_EDGE('',*,*,#142249,.F.); +#143347 = ORIENTED_EDGE('',*,*,#143348,.T.); +#143348 = EDGE_CURVE('',#142241,#142952,#143349,.T.); +#143349 = LINE('',#143350,#143351); +#143350 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.55)); +#143351 = VECTOR('',#143352,1.); +#143352 = DIRECTION('',(0.,0.,-1.)); +#143353 = PLANE('',#143354); +#143354 = AXIS2_PLACEMENT_3D('',#143355,#143356,#143357); +#143355 = CARTESIAN_POINT('',(-2.9,-10.5942,-9.7)); +#143356 = DIRECTION('',(0.,-1.,0.)); +#143357 = DIRECTION('',(0.,0.,-1.)); +#143358 = ADVANCED_FACE('',(#143359),#143370,.T.); +#143359 = FACE_BOUND('',#143360,.T.); +#143360 = EDGE_LOOP('',(#143361,#143362,#143363,#143364)); +#143361 = ORIENTED_EDGE('',*,*,#142959,.F.); +#143362 = ORIENTED_EDGE('',*,*,#143348,.F.); +#143363 = ORIENTED_EDGE('',*,*,#142240,.F.); +#143364 = ORIENTED_EDGE('',*,*,#143365,.T.); +#143365 = EDGE_CURVE('',#142233,#142960,#143366,.T.); +#143366 = LINE('',#143367,#143368); +#143367 = CARTESIAN_POINT('',(-2.9,-10.0942,-7.55)); +#143368 = VECTOR('',#143369,1.); +#143369 = DIRECTION('',(0.,0.,-1.)); +#143370 = CYLINDRICAL_SURFACE('',#143371,0.5); +#143371 = AXIS2_PLACEMENT_3D('',#143372,#143373,#143374); +#143372 = CARTESIAN_POINT('',(-2.4,-10.0942,8.1806)); +#143373 = DIRECTION('',(0.,0.,-1.)); +#143374 = DIRECTION('',(0.,-1.,0.)); +#143375 = ADVANCED_FACE('',(#143376),#143382,.T.); +#143376 = FACE_BOUND('',#143377,.T.); +#143377 = EDGE_LOOP('',(#143378,#143379,#143380,#143381)); +#143378 = ORIENTED_EDGE('',*,*,#142182,.F.); +#143379 = ORIENTED_EDGE('',*,*,#142151,.F.); +#143380 = ORIENTED_EDGE('',*,*,#142870,.T.); +#143381 = ORIENTED_EDGE('',*,*,#142354,.T.); +#143382 = PLANE('',#143383); +#143383 = AXIS2_PLACEMENT_3D('',#143384,#143385,#143386); +#143384 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#143385 = DIRECTION('',(-1.,0.,0.)); +#143386 = DIRECTION('',(0.,0.,1.)); +#143387 = ADVANCED_FACE('',(#143388),#143394,.T.); +#143388 = FACE_BOUND('',#143389,.T.); +#143389 = EDGE_LOOP('',(#143390,#143391,#143392,#143393)); +#143390 = ORIENTED_EDGE('',*,*,#142968,.T.); +#143391 = ORIENTED_EDGE('',*,*,#143365,.F.); +#143392 = ORIENTED_EDGE('',*,*,#142232,.F.); +#143393 = ORIENTED_EDGE('',*,*,#143084,.F.); +#143394 = PLANE('',#143395); +#143395 = AXIS2_PLACEMENT_3D('',#143396,#143397,#143398); +#143396 = CARTESIAN_POINT('',(-2.9,-6.,-9.7)); +#143397 = DIRECTION('',(-1.,0.,0.)); +#143398 = DIRECTION('',(0.,0.,1.)); +#143399 = ADVANCED_FACE('',(#143400),#143433,.T.); +#143400 = FACE_BOUND('',#143401,.T.); +#143401 = EDGE_LOOP('',(#143402,#143408,#143409,#143410,#143417,#143418, + #143419,#143425,#143426)); +#143402 = ORIENTED_EDGE('',*,*,#143403,.F.); +#143403 = EDGE_CURVE('',#142207,#136230,#143404,.T.); +#143404 = LINE('',#143405,#143406); +#143405 = CARTESIAN_POINT('',(1.45,-8.0942,-7.55)); +#143406 = VECTOR('',#143407,1.); +#143407 = DIRECTION('',(6.502567543065E-07,4.068617695643E-05, + 0.999999999172)); +#143408 = ORIENTED_EDGE('',*,*,#142282,.T.); +#143409 = ORIENTED_EDGE('',*,*,#143206,.T.); +#143410 = ORIENTED_EDGE('',*,*,#143411,.T.); +#143411 = EDGE_CURVE('',#143199,#143092,#143412,.T.); +#143412 = CIRCLE('',#143413,1.45); +#143413 = AXIS2_PLACEMENT_3D('',#143414,#143415,#143416); +#143414 = CARTESIAN_POINT('',(0.,-8.0942,-7.53)); +#143415 = DIRECTION('',(0.,0.,1.)); +#143416 = DIRECTION('',(0.933695140789,0.358068965517,-0.)); +#143417 = ORIENTED_EDGE('',*,*,#143091,.F.); +#143418 = ORIENTED_EDGE('',*,*,#142215,.T.); +#143419 = ORIENTED_EDGE('',*,*,#143420,.T.); +#143420 = EDGE_CURVE('',#142205,#136160,#143421,.T.); +#143421 = LINE('',#143422,#143423); +#143422 = CARTESIAN_POINT('',(-1.45,-8.0942,-7.55)); +#143423 = VECTOR('',#143424,1.); +#143424 = DIRECTION('',(8.637091031929E-11,1.291114413819E-07,1.)); +#143425 = ORIENTED_EDGE('',*,*,#136159,.F.); +#143426 = ORIENTED_EDGE('',*,*,#143427,.F.); +#143427 = EDGE_CURVE('',#136230,#136152,#143428,.T.); +#143428 = CIRCLE('',#143429,1.45); +#143429 = AXIS2_PLACEMENT_3D('',#143430,#143431,#143432); +#143430 = CARTESIAN_POINT('',(0.,-8.0942,-7.450000000001)); +#143431 = DIRECTION('',(0.,0.,1.)); +#143432 = DIRECTION('',(1.,0.,-0.)); +#143433 = CYLINDRICAL_SURFACE('',#143434,1.45); +#143434 = AXIS2_PLACEMENT_3D('',#143435,#143436,#143437); +#143435 = CARTESIAN_POINT('',(0.,-8.0942,-7.55)); +#143436 = DIRECTION('',(0.,0.,1.)); +#143437 = DIRECTION('',(1.,0.,-0.)); +#143438 = ADVANCED_FACE('',(#143439),#143461,.T.); +#143439 = FACE_BOUND('',#143440,.T.); +#143440 = EDGE_LOOP('',(#143441,#143442,#143443,#143451,#143458,#143459, + #143460)); +#143441 = ORIENTED_EDGE('',*,*,#136238,.T.); +#143442 = ORIENTED_EDGE('',*,*,#143427,.T.); +#143443 = ORIENTED_EDGE('',*,*,#143444,.F.); +#143444 = EDGE_CURVE('',#143445,#136152,#143447,.T.); +#143445 = VERTEX_POINT('',#143446); +#143446 = CARTESIAN_POINT('',(4.938704461678E-05,-6.652771429417, + -7.330000000001)); +#143447 = LINE('',#143448,#143449); +#143448 = CARTESIAN_POINT('',(4.938704459671E-05,-6.652771429418,-7.33) + ); +#143449 = VECTOR('',#143450,1.); +#143450 = DIRECTION('',(-9.524588184748E-05,7.124705047136E-02, + -0.997458695249)); +#143451 = ORIENTED_EDGE('',*,*,#143452,.T.); +#143452 = EDGE_CURVE('',#143445,#143157,#143453,.T.); +#143453 = CIRCLE('',#143454,1.441428571428); +#143454 = AXIS2_PLACEMENT_3D('',#143455,#143456,#143457); +#143455 = CARTESIAN_POINT('',(3.387290448131E-13,-8.0942,-7.33)); +#143456 = DIRECTION('',(0.,0.,-1.)); +#143457 = DIRECTION('',(3.426256788369E-05,0.999999999413,0.)); +#143458 = ORIENTED_EDGE('',*,*,#143156,.T.); +#143459 = ORIENTED_EDGE('',*,*,#136306,.T.); +#143460 = ORIENTED_EDGE('',*,*,#136272,.T.); +#143461 = CONICAL_SURFACE('',#143462,1.403317104937,7.130746478528E-02); +#143462 = AXIS2_PLACEMENT_3D('',#143463,#143464,#143465); +#143463 = CARTESIAN_POINT('',(3.387290448131E-13,-8.0942,-6.796439469126 + )); +#143464 = DIRECTION('',(0.,0.,-1.)); +#143465 = DIRECTION('',(0.,-1.,0.)); +#143466 = ADVANCED_FACE('',(#143467),#143479,.T.); +#143467 = FACE_BOUND('',#143468,.T.); +#143468 = EDGE_LOOP('',(#143469,#143470,#143471,#143472)); +#143469 = ORIENTED_EDGE('',*,*,#143138,.F.); +#143470 = ORIENTED_EDGE('',*,*,#136194,.F.); +#143471 = ORIENTED_EDGE('',*,*,#136263,.F.); +#143472 = ORIENTED_EDGE('',*,*,#143473,.F.); +#143473 = EDGE_CURVE('',#143139,#136253,#143474,.T.); +#143474 = CIRCLE('',#143475,1.256888079019); +#143475 = AXIS2_PLACEMENT_3D('',#143476,#143477,#143478); +#143476 = CARTESIAN_POINT('',(0.,-8.0942,-6.05)); +#143477 = DIRECTION('',(0.,0.,1.)); +#143478 = DIRECTION('',(-0.910693056204,0.41308371716,0.)); +#143479 = TOROIDAL_SURFACE('',#143480,1.256888079019,0.1); +#143480 = AXIS2_PLACEMENT_3D('',#143481,#143482,#143483); +#143481 = CARTESIAN_POINT('',(0.,-8.0942,-6.15)); +#143482 = DIRECTION('',(0.,0.,-1.)); +#143483 = DIRECTION('',(0.999559268336,2.968617665135E-02,0.)); +#143484 = ADVANCED_FACE('',(#143485),#143491,.T.); +#143485 = FACE_BOUND('',#143486,.T.); +#143486 = EDGE_LOOP('',(#143487,#143488,#143489,#143490)); +#143487 = ORIENTED_EDGE('',*,*,#143149,.F.); +#143488 = ORIENTED_EDGE('',*,*,#143473,.T.); +#143489 = ORIENTED_EDGE('',*,*,#136252,.T.); +#143490 = ORIENTED_EDGE('',*,*,#136296,.T.); +#143491 = PLANE('',#143492); +#143492 = AXIS2_PLACEMENT_3D('',#143493,#143494,#143495); +#143493 = CARTESIAN_POINT('',(0.,0.,-6.05)); +#143494 = DIRECTION('',(0.,0.,1.)); +#143495 = DIRECTION('',(1.,0.,-0.)); +#143496 = ADVANCED_FACE('',(#143497),#143508,.T.); +#143497 = FACE_BOUND('',#143498,.T.); +#143498 = EDGE_LOOP('',(#143499,#143500,#143507)); +#143499 = ORIENTED_EDGE('',*,*,#136151,.F.); +#143500 = ORIENTED_EDGE('',*,*,#143501,.F.); +#143501 = EDGE_CURVE('',#143445,#136141,#143502,.T.); +#143502 = CIRCLE('',#143503,1.441428571429); +#143503 = AXIS2_PLACEMENT_3D('',#143504,#143505,#143506); +#143504 = CARTESIAN_POINT('',(0.,-8.0942,-7.330000000001)); +#143505 = DIRECTION('',(0.,0.,1.)); +#143506 = DIRECTION('',(3.426256811868E-05,0.999999999413,-0.)); +#143507 = ORIENTED_EDGE('',*,*,#143444,.T.); +#143508 = CONICAL_SURFACE('',#143509,1.403316853095,7.130746478528E-02); +#143509 = AXIS2_PLACEMENT_3D('',#143510,#143511,#143512); +#143510 = CARTESIAN_POINT('',(0.,-8.0942,-6.796435943332)); +#143511 = DIRECTION('',(0.,0.,-1.)); +#143512 = DIRECTION('',(0.,-1.,0.)); +#143513 = ADVANCED_FACE('',(#143514),#143521,.T.); +#143514 = FACE_BOUND('',#143515,.T.); +#143515 = EDGE_LOOP('',(#143516,#143517,#143518,#143519,#143520)); +#143516 = ORIENTED_EDGE('',*,*,#143420,.F.); +#143517 = ORIENTED_EDGE('',*,*,#142204,.T.); +#143518 = ORIENTED_EDGE('',*,*,#143403,.T.); +#143519 = ORIENTED_EDGE('',*,*,#136229,.F.); +#143520 = ORIENTED_EDGE('',*,*,#136168,.F.); +#143521 = CYLINDRICAL_SURFACE('',#143522,1.45); +#143522 = AXIS2_PLACEMENT_3D('',#143523,#143524,#143525); +#143523 = CARTESIAN_POINT('',(0.,-8.0942,-7.55)); +#143524 = DIRECTION('',(0.,0.,1.)); +#143525 = DIRECTION('',(1.,0.,-0.)); +#143526 = ADVANCED_FACE('',(#143527),#143541,.F.); +#143527 = FACE_BOUND('',#143528,.T.); +#143528 = EDGE_LOOP('',(#143529,#143536,#143537,#143538,#143539,#143540) + ); +#143529 = ORIENTED_EDGE('',*,*,#143530,.F.); +#143530 = EDGE_CURVE('',#143167,#143124,#143531,.T.); +#143531 = CIRCLE('',#143532,1.5); +#143532 = AXIS2_PLACEMENT_3D('',#143533,#143534,#143535); +#143533 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#143534 = DIRECTION('',(0.,0.,1.)); +#143535 = DIRECTION('',(0.938185331134,0.346133333333,-0.)); +#143536 = ORIENTED_EDGE('',*,*,#143166,.F.); +#143537 = ORIENTED_EDGE('',*,*,#143452,.F.); +#143538 = ORIENTED_EDGE('',*,*,#143501,.T.); +#143539 = ORIENTED_EDGE('',*,*,#136140,.T.); +#143540 = ORIENTED_EDGE('',*,*,#143131,.F.); +#143541 = PLANE('',#143542); +#143542 = AXIS2_PLACEMENT_3D('',#143543,#143544,#143545); +#143543 = CARTESIAN_POINT('',(0.,0.,-7.33)); +#143544 = DIRECTION('',(0.,0.,1.)); +#143545 = DIRECTION('',(1.,0.,-0.)); +#143546 = ADVANCED_FACE('',(#143547),#143605,.F.); +#143547 = FACE_BOUND('',#143548,.F.); +#143548 = EDGE_LOOP('',(#143549,#143558,#143566,#143573,#143580,#143589, + #143597,#143604)); +#143549 = ORIENTED_EDGE('',*,*,#143550,.F.); +#143550 = EDGE_CURVE('',#143551,#143167,#143553,.T.); +#143551 = VERTEX_POINT('',#143552); +#143552 = CARTESIAN_POINT('',(1.5,-8.0942,-7.33)); +#143553 = CIRCLE('',#143554,1.5); +#143554 = AXIS2_PLACEMENT_3D('',#143555,#143556,#143557); +#143555 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#143556 = DIRECTION('',(0.,0.,1.)); +#143557 = DIRECTION('',(1.,0.,-0.)); +#143558 = ORIENTED_EDGE('',*,*,#143559,.T.); +#143559 = EDGE_CURVE('',#143551,#143560,#143562,.T.); +#143560 = VERTEX_POINT('',#143561); +#143561 = CARTESIAN_POINT('',(1.5,-8.0942,-7.53)); +#143562 = LINE('',#143563,#143564); +#143563 = CARTESIAN_POINT('',(1.5,-8.0942,-7.33)); +#143564 = VECTOR('',#143565,1.); +#143565 = DIRECTION('',(0.,0.,-1.)); +#143566 = ORIENTED_EDGE('',*,*,#143567,.T.); +#143567 = EDGE_CURVE('',#143560,#143191,#143568,.T.); +#143568 = CIRCLE('',#143569,1.5); +#143569 = AXIS2_PLACEMENT_3D('',#143570,#143571,#143572); +#143570 = CARTESIAN_POINT('',(0.,-8.0942,-7.53)); +#143571 = DIRECTION('',(0.,0.,1.)); +#143572 = DIRECTION('',(1.,0.,-0.)); +#143573 = ORIENTED_EDGE('',*,*,#143574,.T.); +#143574 = EDGE_CURVE('',#143191,#143100,#143575,.T.); +#143575 = CIRCLE('',#143576,1.5); +#143576 = AXIS2_PLACEMENT_3D('',#143577,#143578,#143579); +#143577 = CARTESIAN_POINT('',(0.,-8.0942,-7.53)); +#143578 = DIRECTION('',(0.,0.,1.)); +#143579 = DIRECTION('',(0.938185331134,0.346133333333,-0.)); +#143580 = ORIENTED_EDGE('',*,*,#143581,.T.); +#143581 = EDGE_CURVE('',#143100,#143582,#143584,.T.); +#143582 = VERTEX_POINT('',#143583); +#143583 = CARTESIAN_POINT('',(-1.5,-8.0942,-7.53)); +#143584 = CIRCLE('',#143585,1.5); +#143585 = AXIS2_PLACEMENT_3D('',#143586,#143587,#143588); +#143586 = CARTESIAN_POINT('',(0.,-8.0942,-7.53)); +#143587 = DIRECTION('',(0.,0.,1.)); +#143588 = DIRECTION('',(-0.938185331134,0.346133333333,0.)); +#143589 = ORIENTED_EDGE('',*,*,#143590,.F.); +#143590 = EDGE_CURVE('',#143591,#143582,#143593,.T.); +#143591 = VERTEX_POINT('',#143592); +#143592 = CARTESIAN_POINT('',(-1.5,-8.0942,-7.33)); +#143593 = LINE('',#143594,#143595); +#143594 = CARTESIAN_POINT('',(-1.5,-8.0942,-7.33)); +#143595 = VECTOR('',#143596,1.); +#143596 = DIRECTION('',(0.,0.,-1.)); +#143597 = ORIENTED_EDGE('',*,*,#143598,.F.); +#143598 = EDGE_CURVE('',#143124,#143591,#143599,.T.); +#143599 = CIRCLE('',#143600,1.5); +#143600 = AXIS2_PLACEMENT_3D('',#143601,#143602,#143603); +#143601 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#143602 = DIRECTION('',(0.,0.,1.)); +#143603 = DIRECTION('',(-0.938185331134,0.346133333333,0.)); +#143604 = ORIENTED_EDGE('',*,*,#143530,.F.); +#143605 = CYLINDRICAL_SURFACE('',#143606,1.5); +#143606 = AXIS2_PLACEMENT_3D('',#143607,#143608,#143609); +#143607 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#143608 = DIRECTION('',(0.,0.,1.)); +#143609 = DIRECTION('',(1.,0.,-0.)); +#143610 = ADVANCED_FACE('',(#143611,#143664,#143684),#143704,.T.); +#143611 = FACE_BOUND('',#143612,.T.); +#143612 = EDGE_LOOP('',(#143613,#143620,#143621,#143622,#143630,#143639, + #143647,#143656,#143662,#143663)); +#143613 = ORIENTED_EDGE('',*,*,#143614,.F.); +#143614 = EDGE_CURVE('',#143591,#143551,#143615,.T.); +#143615 = CIRCLE('',#143616,1.5); +#143616 = AXIS2_PLACEMENT_3D('',#143617,#143618,#143619); +#143617 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#143618 = DIRECTION('',(0.,0.,1.)); +#143619 = DIRECTION('',(-1.,0.,0.)); +#143620 = ORIENTED_EDGE('',*,*,#143598,.F.); +#143621 = ORIENTED_EDGE('',*,*,#143123,.F.); +#143622 = ORIENTED_EDGE('',*,*,#143623,.T.); +#143623 = EDGE_CURVE('',#143116,#143624,#143626,.T.); +#143624 = VERTEX_POINT('',#143625); +#143625 = CARTESIAN_POINT('',(-2.9,-10.0942,-7.33)); +#143626 = LINE('',#143627,#143628); +#143627 = CARTESIAN_POINT('',(-2.9,-7.575,-7.33)); +#143628 = VECTOR('',#143629,1.); +#143629 = DIRECTION('',(0.,-1.,0.)); +#143630 = ORIENTED_EDGE('',*,*,#143631,.T.); +#143631 = EDGE_CURVE('',#143624,#143632,#143634,.T.); +#143632 = VERTEX_POINT('',#143633); +#143633 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.33)); +#143634 = CIRCLE('',#143635,0.5); +#143635 = AXIS2_PLACEMENT_3D('',#143636,#143637,#143638); +#143636 = CARTESIAN_POINT('',(-2.4,-10.0942,-7.33)); +#143637 = DIRECTION('',(0.,0.,1.)); +#143638 = DIRECTION('',(-1.,0.,0.)); +#143639 = ORIENTED_EDGE('',*,*,#143640,.T.); +#143640 = EDGE_CURVE('',#143632,#143641,#143643,.T.); +#143641 = VERTEX_POINT('',#143642); +#143642 = CARTESIAN_POINT('',(2.4,-10.5942,-7.33)); +#143643 = LINE('',#143644,#143645); +#143644 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.33)); +#143645 = VECTOR('',#143646,1.); +#143646 = DIRECTION('',(1.,0.,0.)); +#143647 = ORIENTED_EDGE('',*,*,#143648,.T.); +#143648 = EDGE_CURVE('',#143641,#143649,#143651,.T.); +#143649 = VERTEX_POINT('',#143650); +#143650 = CARTESIAN_POINT('',(2.9,-10.0942,-7.33)); +#143651 = CIRCLE('',#143652,0.5); +#143652 = AXIS2_PLACEMENT_3D('',#143653,#143654,#143655); +#143653 = CARTESIAN_POINT('',(2.4,-10.0942,-7.33)); +#143654 = DIRECTION('',(0.,0.,1.)); +#143655 = DIRECTION('',(0.,-1.,0.)); +#143656 = ORIENTED_EDGE('',*,*,#143657,.T.); +#143657 = EDGE_CURVE('',#143649,#143175,#143658,.T.); +#143658 = LINE('',#143659,#143660); +#143659 = CARTESIAN_POINT('',(2.9,-10.0942,-7.33)); +#143660 = VECTOR('',#143661,1.); +#143661 = DIRECTION('',(0.,1.,0.)); +#143662 = ORIENTED_EDGE('',*,*,#143174,.F.); +#143663 = ORIENTED_EDGE('',*,*,#143550,.F.); +#143664 = FACE_BOUND('',#143665,.T.); +#143665 = EDGE_LOOP('',(#143666,#143677)); +#143666 = ORIENTED_EDGE('',*,*,#143667,.F.); +#143667 = EDGE_CURVE('',#143668,#143670,#143672,.T.); +#143668 = VERTEX_POINT('',#143669); +#143669 = CARTESIAN_POINT('',(1.3431,-9.5903,-7.33)); +#143670 = VERTEX_POINT('',#143671); +#143671 = CARTESIAN_POINT('',(2.3431,-9.5903,-7.33)); +#143672 = CIRCLE('',#143673,0.5); +#143673 = AXIS2_PLACEMENT_3D('',#143674,#143675,#143676); +#143674 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.33)); +#143675 = DIRECTION('',(0.,0.,1.)); +#143676 = DIRECTION('',(-1.,0.,0.)); +#143677 = ORIENTED_EDGE('',*,*,#143678,.F.); +#143678 = EDGE_CURVE('',#143670,#143668,#143679,.T.); +#143679 = CIRCLE('',#143680,0.5); +#143680 = AXIS2_PLACEMENT_3D('',#143681,#143682,#143683); +#143681 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.33)); +#143682 = DIRECTION('',(0.,0.,1.)); +#143683 = DIRECTION('',(1.,0.,-0.)); +#143684 = FACE_BOUND('',#143685,.T.); +#143685 = EDGE_LOOP('',(#143686,#143697)); +#143686 = ORIENTED_EDGE('',*,*,#143687,.F.); +#143687 = EDGE_CURVE('',#143688,#143690,#143692,.T.); +#143688 = VERTEX_POINT('',#143689); +#143689 = CARTESIAN_POINT('',(-2.3431,-9.5903,-7.33)); +#143690 = VERTEX_POINT('',#143691); +#143691 = CARTESIAN_POINT('',(-1.3431,-9.5903,-7.33)); +#143692 = CIRCLE('',#143693,0.5); +#143693 = AXIS2_PLACEMENT_3D('',#143694,#143695,#143696); +#143694 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.33)); +#143695 = DIRECTION('',(0.,0.,1.)); +#143696 = DIRECTION('',(-1.,0.,0.)); +#143697 = ORIENTED_EDGE('',*,*,#143698,.F.); +#143698 = EDGE_CURVE('',#143690,#143688,#143699,.T.); +#143699 = CIRCLE('',#143700,0.5); +#143700 = AXIS2_PLACEMENT_3D('',#143701,#143702,#143703); +#143701 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.33)); +#143702 = DIRECTION('',(0.,0.,1.)); +#143703 = DIRECTION('',(1.,0.,-0.)); +#143704 = PLANE('',#143705); +#143705 = AXIS2_PLACEMENT_3D('',#143706,#143707,#143708); +#143706 = CARTESIAN_POINT('',(0.,0.,-7.33)); +#143707 = DIRECTION('',(0.,0.,1.)); +#143708 = DIRECTION('',(1.,0.,-0.)); +#143709 = ADVANCED_FACE('',(#143710),#143736,.T.); +#143710 = FACE_BOUND('',#143711,.T.); +#143711 = EDGE_LOOP('',(#143712,#143720,#143721,#143729)); +#143712 = ORIENTED_EDGE('',*,*,#143713,.F.); +#143713 = EDGE_CURVE('',#143690,#143714,#143716,.T.); +#143714 = VERTEX_POINT('',#143715); +#143715 = CARTESIAN_POINT('',(-1.3431,-9.5903,-7.23)); +#143716 = LINE('',#143717,#143718); +#143717 = CARTESIAN_POINT('',(-1.3431,-9.5903,-7.33)); +#143718 = VECTOR('',#143719,1.); +#143719 = DIRECTION('',(0.,-1.731148557838E-09,1.)); +#143720 = ORIENTED_EDGE('',*,*,#143698,.T.); +#143721 = ORIENTED_EDGE('',*,*,#143722,.T.); +#143722 = EDGE_CURVE('',#143688,#143723,#143725,.T.); +#143723 = VERTEX_POINT('',#143724); +#143724 = CARTESIAN_POINT('',(-2.3431,-9.5903,-7.23)); +#143725 = LINE('',#143726,#143727); +#143726 = CARTESIAN_POINT('',(-2.3431,-9.5903,-7.33)); +#143727 = VECTOR('',#143728,1.); +#143728 = DIRECTION('',(0.,1.731166321406E-09,1.)); +#143729 = ORIENTED_EDGE('',*,*,#143730,.F.); +#143730 = EDGE_CURVE('',#143714,#143723,#143731,.T.); +#143731 = CIRCLE('',#143732,0.5); +#143732 = AXIS2_PLACEMENT_3D('',#143733,#143734,#143735); +#143733 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.23)); +#143734 = DIRECTION('',(0.,0.,1.)); +#143735 = DIRECTION('',(1.,0.,-0.)); +#143736 = CYLINDRICAL_SURFACE('',#143737,0.5); +#143737 = AXIS2_PLACEMENT_3D('',#143738,#143739,#143740); +#143738 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.33)); +#143739 = DIRECTION('',(0.,0.,1.)); +#143740 = DIRECTION('',(1.,0.,-0.)); +#143741 = ADVANCED_FACE('',(#143742),#143770,.T.); +#143742 = FACE_BOUND('',#143743,.T.); +#143743 = EDGE_LOOP('',(#143744,#143753,#143754,#143763)); +#143744 = ORIENTED_EDGE('',*,*,#143745,.T.); +#143745 = EDGE_CURVE('',#143746,#143714,#143748,.T.); +#143746 = VERTEX_POINT('',#143747); +#143747 = CARTESIAN_POINT('',(-1.5431,-9.5903,-7.03)); +#143748 = CIRCLE('',#143749,0.2); +#143749 = AXIS2_PLACEMENT_3D('',#143750,#143751,#143752); +#143750 = CARTESIAN_POINT('',(-1.5431,-9.5903,-7.23)); +#143751 = DIRECTION('',(0.,1.,0.)); +#143752 = DIRECTION('',(-2.710505431214E-14,0.,1.)); +#143753 = ORIENTED_EDGE('',*,*,#143730,.T.); +#143754 = ORIENTED_EDGE('',*,*,#143755,.F.); +#143755 = EDGE_CURVE('',#143756,#143723,#143758,.T.); +#143756 = VERTEX_POINT('',#143757); +#143757 = CARTESIAN_POINT('',(-2.1431,-9.5903,-7.03)); +#143758 = CIRCLE('',#143759,0.2); +#143759 = AXIS2_PLACEMENT_3D('',#143760,#143761,#143762); +#143760 = CARTESIAN_POINT('',(-2.1431,-9.5903,-7.23)); +#143761 = DIRECTION('',(-1.217081990745E-14,-1.,3.513204367352E-28)); +#143762 = DIRECTION('',(2.818925648462E-14,8.234072735932E-30,1.)); +#143763 = ORIENTED_EDGE('',*,*,#143764,.F.); +#143764 = EDGE_CURVE('',#143746,#143756,#143765,.T.); +#143765 = CIRCLE('',#143766,0.3); +#143766 = AXIS2_PLACEMENT_3D('',#143767,#143768,#143769); +#143767 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.03)); +#143768 = DIRECTION('',(0.,0.,1.)); +#143769 = DIRECTION('',(1.,0.,-0.)); +#143770 = TOROIDAL_SURFACE('',#143771,0.3,0.2); +#143771 = AXIS2_PLACEMENT_3D('',#143772,#143773,#143774); +#143772 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.23)); +#143773 = DIRECTION('',(0.,0.,1.)); +#143774 = DIRECTION('',(0.996863496359,-7.914018971289E-02,0.)); +#143775 = ADVANCED_FACE('',(#143776),#143786,.T.); +#143776 = FACE_BOUND('',#143777,.T.); +#143777 = EDGE_LOOP('',(#143778,#143785)); +#143778 = ORIENTED_EDGE('',*,*,#143779,.T.); +#143779 = EDGE_CURVE('',#143756,#143746,#143780,.T.); +#143780 = CIRCLE('',#143781,0.3); +#143781 = AXIS2_PLACEMENT_3D('',#143782,#143783,#143784); +#143782 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.03)); +#143783 = DIRECTION('',(0.,0.,1.)); +#143784 = DIRECTION('',(-1.,0.,0.)); +#143785 = ORIENTED_EDGE('',*,*,#143764,.T.); +#143786 = PLANE('',#143787); +#143787 = AXIS2_PLACEMENT_3D('',#143788,#143789,#143790); +#143788 = CARTESIAN_POINT('',(0.,0.,-7.03)); +#143789 = DIRECTION('',(0.,0.,1.)); +#143790 = DIRECTION('',(1.,0.,-0.)); +#143791 = ADVANCED_FACE('',(#143792),#143812,.T.); +#143792 = FACE_BOUND('',#143793,.T.); +#143793 = EDGE_LOOP('',(#143794,#143805)); +#143794 = ORIENTED_EDGE('',*,*,#143795,.T.); +#143795 = EDGE_CURVE('',#143796,#143798,#143800,.T.); +#143796 = VERTEX_POINT('',#143797); +#143797 = CARTESIAN_POINT('',(1.5431,-9.5903,-7.03)); +#143798 = VERTEX_POINT('',#143799); +#143799 = CARTESIAN_POINT('',(2.1431,-9.5903,-7.03)); +#143800 = CIRCLE('',#143801,0.3); +#143801 = AXIS2_PLACEMENT_3D('',#143802,#143803,#143804); +#143802 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.03)); +#143803 = DIRECTION('',(0.,0.,1.)); +#143804 = DIRECTION('',(-1.,0.,0.)); +#143805 = ORIENTED_EDGE('',*,*,#143806,.T.); +#143806 = EDGE_CURVE('',#143798,#143796,#143807,.T.); +#143807 = CIRCLE('',#143808,0.3); +#143808 = AXIS2_PLACEMENT_3D('',#143809,#143810,#143811); +#143809 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.03)); +#143810 = DIRECTION('',(0.,0.,1.)); +#143811 = DIRECTION('',(1.,0.,-0.)); +#143812 = PLANE('',#143813); +#143813 = AXIS2_PLACEMENT_3D('',#143814,#143815,#143816); +#143814 = CARTESIAN_POINT('',(0.,0.,-7.03)); +#143815 = DIRECTION('',(0.,0.,1.)); +#143816 = DIRECTION('',(1.,0.,-0.)); +#143817 = ADVANCED_FACE('',(#143818),#143830,.T.); +#143818 = FACE_BOUND('',#143819,.T.); +#143819 = EDGE_LOOP('',(#143820,#143821,#143828,#143829)); +#143820 = ORIENTED_EDGE('',*,*,#143755,.T.); +#143821 = ORIENTED_EDGE('',*,*,#143822,.T.); +#143822 = EDGE_CURVE('',#143723,#143714,#143823,.T.); +#143823 = CIRCLE('',#143824,0.5); +#143824 = AXIS2_PLACEMENT_3D('',#143825,#143826,#143827); +#143825 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.23)); +#143826 = DIRECTION('',(0.,0.,1.)); +#143827 = DIRECTION('',(-1.,0.,0.)); +#143828 = ORIENTED_EDGE('',*,*,#143745,.F.); +#143829 = ORIENTED_EDGE('',*,*,#143779,.F.); +#143830 = TOROIDAL_SURFACE('',#143831,0.3,0.2); +#143831 = AXIS2_PLACEMENT_3D('',#143832,#143833,#143834); +#143832 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.23)); +#143833 = DIRECTION('',(0.,0.,1.)); +#143834 = DIRECTION('',(-0.996863496359,7.914018971289E-02,0.)); +#143835 = ADVANCED_FACE('',(#143836),#143842,.T.); +#143836 = FACE_BOUND('',#143837,.T.); +#143837 = EDGE_LOOP('',(#143838,#143839,#143840,#143841)); +#143838 = ORIENTED_EDGE('',*,*,#143722,.F.); +#143839 = ORIENTED_EDGE('',*,*,#143687,.T.); +#143840 = ORIENTED_EDGE('',*,*,#143713,.T.); +#143841 = ORIENTED_EDGE('',*,*,#143822,.F.); +#143842 = CYLINDRICAL_SURFACE('',#143843,0.5); +#143843 = AXIS2_PLACEMENT_3D('',#143844,#143845,#143846); +#143844 = CARTESIAN_POINT('',(-1.8431,-9.5903,-7.33)); +#143845 = DIRECTION('',(0.,0.,1.)); +#143846 = DIRECTION('',(1.,0.,-0.)); +#143847 = ADVANCED_FACE('',(#143848),#143876,.T.); +#143848 = FACE_BOUND('',#143849,.T.); +#143849 = EDGE_LOOP('',(#143850,#143859,#143868,#143875)); +#143850 = ORIENTED_EDGE('',*,*,#143851,.T.); +#143851 = EDGE_CURVE('',#143798,#143852,#143854,.T.); +#143852 = VERTEX_POINT('',#143853); +#143853 = CARTESIAN_POINT('',(2.3431,-9.5903,-7.23)); +#143854 = CIRCLE('',#143855,0.2); +#143855 = AXIS2_PLACEMENT_3D('',#143856,#143857,#143858); +#143856 = CARTESIAN_POINT('',(2.1431,-9.5903,-7.23)); +#143857 = DIRECTION('',(0.,1.,0.)); +#143858 = DIRECTION('',(-2.602085213965E-14,0.,1.)); +#143859 = ORIENTED_EDGE('',*,*,#143860,.T.); +#143860 = EDGE_CURVE('',#143852,#143861,#143863,.T.); +#143861 = VERTEX_POINT('',#143862); +#143862 = CARTESIAN_POINT('',(1.3431,-9.5903,-7.23)); +#143863 = CIRCLE('',#143864,0.5); +#143864 = AXIS2_PLACEMENT_3D('',#143865,#143866,#143867); +#143865 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.23)); +#143866 = DIRECTION('',(0.,0.,1.)); +#143867 = DIRECTION('',(1.,0.,-0.)); +#143868 = ORIENTED_EDGE('',*,*,#143869,.F.); +#143869 = EDGE_CURVE('',#143796,#143861,#143870,.T.); +#143870 = CIRCLE('',#143871,0.2); +#143871 = AXIS2_PLACEMENT_3D('',#143872,#143873,#143874); +#143872 = CARTESIAN_POINT('',(1.5431,-9.5903,-7.23)); +#143873 = DIRECTION('',(-1.210143096841E-14,-1.,3.49317469593E-28)); +#143874 = DIRECTION('',(2.927345865711E-14,-4.933269552596E-30,1.)); +#143875 = ORIENTED_EDGE('',*,*,#143806,.F.); +#143876 = TOROIDAL_SURFACE('',#143877,0.3,0.2); +#143877 = AXIS2_PLACEMENT_3D('',#143878,#143879,#143880); +#143878 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.23)); +#143879 = DIRECTION('',(0.,0.,1.)); +#143880 = DIRECTION('',(0.996863496359,-7.914018971289E-02,0.)); +#143881 = ADVANCED_FACE('',(#143882),#143894,.T.); +#143882 = FACE_BOUND('',#143883,.T.); +#143883 = EDGE_LOOP('',(#143884,#143885,#143892,#143893)); +#143884 = ORIENTED_EDGE('',*,*,#143869,.T.); +#143885 = ORIENTED_EDGE('',*,*,#143886,.T.); +#143886 = EDGE_CURVE('',#143861,#143852,#143887,.T.); +#143887 = CIRCLE('',#143888,0.5); +#143888 = AXIS2_PLACEMENT_3D('',#143889,#143890,#143891); +#143889 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.23)); +#143890 = DIRECTION('',(0.,0.,1.)); +#143891 = DIRECTION('',(-1.,0.,0.)); +#143892 = ORIENTED_EDGE('',*,*,#143851,.F.); +#143893 = ORIENTED_EDGE('',*,*,#143795,.F.); +#143894 = TOROIDAL_SURFACE('',#143895,0.3,0.2); +#143895 = AXIS2_PLACEMENT_3D('',#143896,#143897,#143898); +#143896 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.23)); +#143897 = DIRECTION('',(0.,0.,1.)); +#143898 = DIRECTION('',(-0.996863496359,7.914018971289E-02,0.)); +#143899 = ADVANCED_FACE('',(#143900),#143916,.T.); +#143900 = FACE_BOUND('',#143901,.T.); +#143901 = EDGE_LOOP('',(#143902,#143908,#143909,#143915)); +#143902 = ORIENTED_EDGE('',*,*,#143903,.F.); +#143903 = EDGE_CURVE('',#143668,#143861,#143904,.T.); +#143904 = LINE('',#143905,#143906); +#143905 = CARTESIAN_POINT('',(1.3431,-9.5903,-7.33)); +#143906 = VECTOR('',#143907,1.); +#143907 = DIRECTION('',(0.,1.731184084974E-09,1.)); +#143908 = ORIENTED_EDGE('',*,*,#143667,.T.); +#143909 = ORIENTED_EDGE('',*,*,#143910,.T.); +#143910 = EDGE_CURVE('',#143670,#143852,#143911,.T.); +#143911 = LINE('',#143912,#143913); +#143912 = CARTESIAN_POINT('',(2.3431,-9.5903,-7.33)); +#143913 = VECTOR('',#143914,1.); +#143914 = DIRECTION('',(0.,-1.731148557838E-09,1.)); +#143915 = ORIENTED_EDGE('',*,*,#143886,.F.); +#143916 = CYLINDRICAL_SURFACE('',#143917,0.5); +#143917 = AXIS2_PLACEMENT_3D('',#143918,#143919,#143920); +#143918 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.33)); +#143919 = DIRECTION('',(0.,0.,1.)); +#143920 = DIRECTION('',(1.,0.,-0.)); +#143921 = ADVANCED_FACE('',(#143922),#143928,.T.); +#143922 = FACE_BOUND('',#143923,.T.); +#143923 = EDGE_LOOP('',(#143924,#143925,#143926,#143927)); +#143924 = ORIENTED_EDGE('',*,*,#143910,.F.); +#143925 = ORIENTED_EDGE('',*,*,#143678,.T.); +#143926 = ORIENTED_EDGE('',*,*,#143903,.T.); +#143927 = ORIENTED_EDGE('',*,*,#143860,.F.); +#143928 = CYLINDRICAL_SURFACE('',#143929,0.5); +#143929 = AXIS2_PLACEMENT_3D('',#143930,#143931,#143932); +#143930 = CARTESIAN_POINT('',(1.8431,-9.5903,-7.33)); +#143931 = DIRECTION('',(0.,0.,1.)); +#143932 = DIRECTION('',(1.,0.,-0.)); +#143933 = ADVANCED_FACE('',(#143934),#143952,.T.); +#143934 = FACE_BOUND('',#143935,.T.); +#143935 = EDGE_LOOP('',(#143936,#143937,#143945,#143951)); +#143936 = ORIENTED_EDGE('',*,*,#143657,.F.); +#143937 = ORIENTED_EDGE('',*,*,#143938,.F.); +#143938 = EDGE_CURVE('',#143939,#143649,#143941,.T.); +#143939 = VERTEX_POINT('',#143940); +#143940 = CARTESIAN_POINT('',(2.9,-10.0942,-7.53)); +#143941 = LINE('',#143942,#143943); +#143942 = CARTESIAN_POINT('',(2.9,-10.0942,-7.53)); +#143943 = VECTOR('',#143944,1.); +#143944 = DIRECTION('',(0.,0.,1.)); +#143945 = ORIENTED_EDGE('',*,*,#143946,.T.); +#143946 = EDGE_CURVE('',#143939,#143183,#143947,.T.); +#143947 = LINE('',#143948,#143949); +#143948 = CARTESIAN_POINT('',(2.9,-10.0942,-7.53)); +#143949 = VECTOR('',#143950,1.); +#143950 = DIRECTION('',(0.,1.,0.)); +#143951 = ORIENTED_EDGE('',*,*,#143182,.T.); +#143952 = PLANE('',#143953); +#143953 = AXIS2_PLACEMENT_3D('',#143954,#143955,#143956); +#143954 = CARTESIAN_POINT('',(2.9,-10.0942,-7.53)); +#143955 = DIRECTION('',(1.,0.,0.)); +#143956 = DIRECTION('',(-0.,1.,0.)); +#143957 = ADVANCED_FACE('',(#143958),#144004,.F.); +#143958 = FACE_BOUND('',#143959,.T.); +#143959 = EDGE_LOOP('',(#143960,#143961,#143962,#143971,#143979,#143988, + #143994,#143995,#143996,#144003)); +#143960 = ORIENTED_EDGE('',*,*,#143190,.T.); +#143961 = ORIENTED_EDGE('',*,*,#143946,.F.); +#143962 = ORIENTED_EDGE('',*,*,#143963,.F.); +#143963 = EDGE_CURVE('',#143964,#143939,#143966,.T.); +#143964 = VERTEX_POINT('',#143965); +#143965 = CARTESIAN_POINT('',(2.4,-10.5942,-7.53)); +#143966 = CIRCLE('',#143967,0.5); +#143967 = AXIS2_PLACEMENT_3D('',#143968,#143969,#143970); +#143968 = CARTESIAN_POINT('',(2.4,-10.0942,-7.53)); +#143969 = DIRECTION('',(0.,0.,1.)); +#143970 = DIRECTION('',(0.,-1.,0.)); +#143971 = ORIENTED_EDGE('',*,*,#143972,.F.); +#143972 = EDGE_CURVE('',#143973,#143964,#143975,.T.); +#143973 = VERTEX_POINT('',#143974); +#143974 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.53)); +#143975 = LINE('',#143976,#143977); +#143976 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.53)); +#143977 = VECTOR('',#143978,1.); +#143978 = DIRECTION('',(1.,0.,0.)); +#143979 = ORIENTED_EDGE('',*,*,#143980,.F.); +#143980 = EDGE_CURVE('',#143981,#143973,#143983,.T.); +#143981 = VERTEX_POINT('',#143982); +#143982 = CARTESIAN_POINT('',(-2.9,-10.0942,-7.53)); +#143983 = CIRCLE('',#143984,0.5); +#143984 = AXIS2_PLACEMENT_3D('',#143985,#143986,#143987); +#143985 = CARTESIAN_POINT('',(-2.4,-10.0942,-7.53)); +#143986 = DIRECTION('',(0.,0.,1.)); +#143987 = DIRECTION('',(-1.,0.,0.)); +#143988 = ORIENTED_EDGE('',*,*,#143989,.F.); +#143989 = EDGE_CURVE('',#143108,#143981,#143990,.T.); +#143990 = LINE('',#143991,#143992); +#143991 = CARTESIAN_POINT('',(-2.9,-7.575,-7.53)); +#143992 = VECTOR('',#143993,1.); +#143993 = DIRECTION('',(0.,-1.,0.)); +#143994 = ORIENTED_EDGE('',*,*,#143107,.T.); +#143995 = ORIENTED_EDGE('',*,*,#143581,.T.); +#143996 = ORIENTED_EDGE('',*,*,#143997,.T.); +#143997 = EDGE_CURVE('',#143582,#143560,#143998,.T.); +#143998 = CIRCLE('',#143999,1.5); +#143999 = AXIS2_PLACEMENT_3D('',#144000,#144001,#144002); +#144000 = CARTESIAN_POINT('',(0.,-8.0942,-7.53)); +#144001 = DIRECTION('',(0.,0.,1.)); +#144002 = DIRECTION('',(-1.,0.,0.)); +#144003 = ORIENTED_EDGE('',*,*,#143567,.T.); +#144004 = PLANE('',#144005); +#144005 = AXIS2_PLACEMENT_3D('',#144006,#144007,#144008); +#144006 = CARTESIAN_POINT('',(0.,0.,-7.53)); +#144007 = DIRECTION('',(0.,0.,1.)); +#144008 = DIRECTION('',(1.,0.,-0.)); +#144009 = ADVANCED_FACE('',(#144010),#144016,.F.); +#144010 = FACE_BOUND('',#144011,.F.); +#144011 = EDGE_LOOP('',(#144012,#144013,#144014,#144015)); +#144012 = ORIENTED_EDGE('',*,*,#143614,.F.); +#144013 = ORIENTED_EDGE('',*,*,#143590,.T.); +#144014 = ORIENTED_EDGE('',*,*,#143997,.T.); +#144015 = ORIENTED_EDGE('',*,*,#143559,.F.); +#144016 = CYLINDRICAL_SURFACE('',#144017,1.5); +#144017 = AXIS2_PLACEMENT_3D('',#144018,#144019,#144020); +#144018 = CARTESIAN_POINT('',(0.,-8.0942,-7.33)); +#144019 = DIRECTION('',(0.,0.,1.)); +#144020 = DIRECTION('',(1.,0.,-0.)); +#144021 = ADVANCED_FACE('',(#144022),#144033,.T.); +#144022 = FACE_BOUND('',#144023,.T.); +#144023 = EDGE_LOOP('',(#144024,#144025,#144031,#144032)); +#144024 = ORIENTED_EDGE('',*,*,#143989,.T.); +#144025 = ORIENTED_EDGE('',*,*,#144026,.T.); +#144026 = EDGE_CURVE('',#143981,#143624,#144027,.T.); +#144027 = LINE('',#144028,#144029); +#144028 = CARTESIAN_POINT('',(-2.9,-10.0942,-7.53)); +#144029 = VECTOR('',#144030,1.); +#144030 = DIRECTION('',(0.,0.,1.)); +#144031 = ORIENTED_EDGE('',*,*,#143623,.F.); +#144032 = ORIENTED_EDGE('',*,*,#143115,.F.); +#144033 = PLANE('',#144034); +#144034 = AXIS2_PLACEMENT_3D('',#144035,#144036,#144037); +#144035 = CARTESIAN_POINT('',(-2.9,-7.575,-7.53)); +#144036 = DIRECTION('',(-1.,0.,0.)); +#144037 = DIRECTION('',(0.,0.,1.)); +#144038 = ADVANCED_FACE('',(#144039),#144050,.T.); +#144039 = FACE_BOUND('',#144040,.T.); +#144040 = EDGE_LOOP('',(#144041,#144047,#144048,#144049)); +#144041 = ORIENTED_EDGE('',*,*,#144042,.T.); +#144042 = EDGE_CURVE('',#143973,#143632,#144043,.T.); +#144043 = LINE('',#144044,#144045); +#144044 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.53)); +#144045 = VECTOR('',#144046,1.); +#144046 = DIRECTION('',(0.,0.,1.)); +#144047 = ORIENTED_EDGE('',*,*,#143631,.F.); +#144048 = ORIENTED_EDGE('',*,*,#144026,.F.); +#144049 = ORIENTED_EDGE('',*,*,#143980,.T.); +#144050 = CYLINDRICAL_SURFACE('',#144051,0.5); +#144051 = AXIS2_PLACEMENT_3D('',#144052,#144053,#144054); +#144052 = CARTESIAN_POINT('',(-2.4,-10.0942,-7.53)); +#144053 = DIRECTION('',(0.,0.,1.)); +#144054 = DIRECTION('',(1.,0.,-0.)); +#144055 = ADVANCED_FACE('',(#144056),#144067,.T.); +#144056 = FACE_BOUND('',#144057,.T.); +#144057 = EDGE_LOOP('',(#144058,#144064,#144065,#144066)); +#144058 = ORIENTED_EDGE('',*,*,#144059,.T.); +#144059 = EDGE_CURVE('',#143964,#143641,#144060,.T.); +#144060 = LINE('',#144061,#144062); +#144061 = CARTESIAN_POINT('',(2.4,-10.5942,-7.53)); +#144062 = VECTOR('',#144063,1.); +#144063 = DIRECTION('',(0.,0.,1.)); +#144064 = ORIENTED_EDGE('',*,*,#143640,.F.); +#144065 = ORIENTED_EDGE('',*,*,#144042,.F.); +#144066 = ORIENTED_EDGE('',*,*,#143972,.T.); +#144067 = PLANE('',#144068); +#144068 = AXIS2_PLACEMENT_3D('',#144069,#144070,#144071); +#144069 = CARTESIAN_POINT('',(-2.4,-10.5942,-7.53)); +#144070 = DIRECTION('',(0.,-1.,0.)); +#144071 = DIRECTION('',(0.,0.,-1.)); +#144072 = ADVANCED_FACE('',(#144073),#144079,.T.); +#144073 = FACE_BOUND('',#144074,.T.); +#144074 = EDGE_LOOP('',(#144075,#144076,#144077,#144078)); +#144075 = ORIENTED_EDGE('',*,*,#143938,.T.); +#144076 = ORIENTED_EDGE('',*,*,#143648,.F.); +#144077 = ORIENTED_EDGE('',*,*,#144059,.F.); +#144078 = ORIENTED_EDGE('',*,*,#143963,.T.); +#144079 = CYLINDRICAL_SURFACE('',#144080,0.5); +#144080 = AXIS2_PLACEMENT_3D('',#144081,#144082,#144083); +#144081 = CARTESIAN_POINT('',(2.4,-10.0942,-7.53)); +#144082 = DIRECTION('',(0.,0.,1.)); +#144083 = DIRECTION('',(1.,0.,-0.)); +#144084 = ADVANCED_FACE('',(#144085),#144091,.T.); +#144085 = FACE_BOUND('',#144086,.T.); +#144086 = EDGE_LOOP('',(#144087,#144088,#144089,#144090)); +#144087 = ORIENTED_EDGE('',*,*,#143198,.T.); +#144088 = ORIENTED_EDGE('',*,*,#143574,.T.); +#144089 = ORIENTED_EDGE('',*,*,#143099,.T.); +#144090 = ORIENTED_EDGE('',*,*,#143411,.F.); +#144091 = PLANE('',#144092); +#144092 = AXIS2_PLACEMENT_3D('',#144093,#144094,#144095); +#144093 = CARTESIAN_POINT('',(0.,0.,-7.53)); +#144094 = DIRECTION('',(0.,0.,1.)); +#144095 = DIRECTION('',(1.,0.,-0.)); +#144096 = ADVANCED_FACE('',(#144097),#144108,.T.); +#144097 = FACE_BOUND('',#144098,.T.); +#144098 = EDGE_LOOP('',(#144099,#144100,#144106,#144107)); +#144099 = ORIENTED_EDGE('',*,*,#143076,.T.); +#144100 = ORIENTED_EDGE('',*,*,#144101,.T.); +#144101 = EDGE_CURVE('',#143069,#142665,#144102,.T.); +#144102 = LINE('',#144103,#144104); +#144103 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-8.9)); +#144104 = VECTOR('',#144105,1.); +#144105 = DIRECTION('',(0.,-1.,0.)); +#144106 = ORIENTED_EDGE('',*,*,#142664,.F.); +#144107 = ORIENTED_EDGE('',*,*,#143002,.F.); +#144108 = PLANE('',#144109); +#144109 = AXIS2_PLACEMENT_3D('',#144110,#144111,#144112); +#144110 = CARTESIAN_POINT('',(-4.3,-7.575,-8.9)); +#144111 = DIRECTION('',(0.,0.,-1.)); +#144112 = DIRECTION('',(0.,-1.,0.)); +#144113 = ADVANCED_FACE('',(#144114),#144125,.T.); +#144114 = FACE_BOUND('',#144115,.T.); +#144115 = EDGE_LOOP('',(#144116,#144122,#144123,#144124)); +#144116 = ORIENTED_EDGE('',*,*,#144117,.T.); +#144117 = EDGE_CURVE('',#143061,#142673,#144118,.T.); +#144118 = LINE('',#144119,#144120); +#144119 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-7.266192279819)); +#144120 = VECTOR('',#144121,1.); +#144121 = DIRECTION('',(0.,-1.,0.)); +#144122 = ORIENTED_EDGE('',*,*,#142672,.F.); +#144123 = ORIENTED_EDGE('',*,*,#144101,.F.); +#144124 = ORIENTED_EDGE('',*,*,#143068,.T.); +#144125 = PLANE('',#144126); +#144126 = AXIS2_PLACEMENT_3D('',#144127,#144128,#144129); +#144127 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-8.9)); +#144128 = DIRECTION('',(1.,0.,0.)); +#144129 = DIRECTION('',(-0.,1.,0.)); +#144130 = ADVANCED_FACE('',(#144131),#144142,.T.); +#144131 = FACE_BOUND('',#144132,.T.); +#144132 = EDGE_LOOP('',(#144133,#144139,#144140,#144141)); +#144133 = ORIENTED_EDGE('',*,*,#144134,.T.); +#144134 = EDGE_CURVE('',#143053,#142681,#144135,.T.); +#144135 = LINE('',#144136,#144137); +#144136 = CARTESIAN_POINT('',(-2.4,-7.575,-7.266192279819)); +#144137 = VECTOR('',#144138,1.); +#144138 = DIRECTION('',(0.,-1.,0.)); +#144139 = ORIENTED_EDGE('',*,*,#142680,.F.); +#144140 = ORIENTED_EDGE('',*,*,#144117,.F.); +#144141 = ORIENTED_EDGE('',*,*,#143060,.T.); +#144142 = PLANE('',#144143); +#144143 = AXIS2_PLACEMENT_3D('',#144144,#144145,#144146); +#144144 = CARTESIAN_POINT('',(-3.036382958558,-7.575,-7.266192279819)); +#144145 = DIRECTION('',(0.,0.,-1.)); +#144146 = DIRECTION('',(0.,-1.,0.)); +#144147 = ADVANCED_FACE('',(#144148),#144159,.T.); +#144148 = FACE_BOUND('',#144149,.T.); +#144149 = EDGE_LOOP('',(#144150,#144151,#144152,#144153)); +#144150 = ORIENTED_EDGE('',*,*,#142688,.F.); +#144151 = ORIENTED_EDGE('',*,*,#144134,.F.); +#144152 = ORIENTED_EDGE('',*,*,#143052,.T.); +#144153 = ORIENTED_EDGE('',*,*,#144154,.T.); +#144154 = EDGE_CURVE('',#143045,#142689,#144155,.T.); +#144155 = LINE('',#144156,#144157); +#144156 = CARTESIAN_POINT('',(-2.4,-7.575,-4.4)); +#144157 = VECTOR('',#144158,1.); +#144158 = DIRECTION('',(0.,-0.640184399664,-0.768221279597)); +#144159 = PLANE('',#144160); +#144160 = AXIS2_PLACEMENT_3D('',#144161,#144162,#144163); +#144161 = CARTESIAN_POINT('',(-2.4,-7.575,-7.266192279819)); +#144162 = DIRECTION('',(1.,0.,0.)); +#144163 = DIRECTION('',(-0.,1.,0.)); +#144164 = ADVANCED_FACE('',(#144165),#144176,.T.); +#144165 = FACE_BOUND('',#144166,.T.); +#144166 = EDGE_LOOP('',(#144167,#144168,#144169,#144170)); +#144167 = ORIENTED_EDGE('',*,*,#142696,.F.); +#144168 = ORIENTED_EDGE('',*,*,#144154,.F.); +#144169 = ORIENTED_EDGE('',*,*,#143044,.T.); +#144170 = ORIENTED_EDGE('',*,*,#144171,.F.); +#144171 = EDGE_CURVE('',#142647,#143037,#144172,.T.); +#144172 = LINE('',#144173,#144174); +#144173 = CARTESIAN_POINT('',(-4.3,-9.575,-6.8)); +#144174 = VECTOR('',#144175,1.); +#144175 = DIRECTION('',(0.,0.640184399664,0.768221279597)); +#144176 = PLANE('',#144177); +#144177 = AXIS2_PLACEMENT_3D('',#144178,#144179,#144180); +#144178 = CARTESIAN_POINT('',(-3.35,-8.575,-5.6)); +#144179 = DIRECTION('',(0.,-0.768221279597,0.640184399664)); +#144180 = DIRECTION('',(-1.,0.,0.)); +#144181 = ADVANCED_FACE('',(#144182),#144199,.T.); +#144182 = FACE_BOUND('',#144183,.T.); +#144183 = EDGE_LOOP('',(#144184,#144185,#144186,#144187,#144188,#144189, + #144190,#144196,#144197,#144198)); +#144184 = ORIENTED_EDGE('',*,*,#143036,.F.); +#144185 = ORIENTED_EDGE('',*,*,#142408,.T.); +#144186 = ORIENTED_EDGE('',*,*,#142386,.T.); +#144187 = ORIENTED_EDGE('',*,*,#142734,.T.); +#144188 = ORIENTED_EDGE('',*,*,#142119,.F.); +#144189 = ORIENTED_EDGE('',*,*,#138406,.F.); +#144190 = ORIENTED_EDGE('',*,*,#144191,.T.); +#144191 = EDGE_CURVE('',#138398,#142773,#144192,.T.); +#144192 = LINE('',#144193,#144194); +#144193 = CARTESIAN_POINT('',(-4.3,-10.6,-11.2)); +#144194 = VECTOR('',#144195,1.); +#144195 = DIRECTION('',(0.,0.,1.)); +#144196 = ORIENTED_EDGE('',*,*,#142772,.T.); +#144197 = ORIENTED_EDGE('',*,*,#142646,.F.); +#144198 = ORIENTED_EDGE('',*,*,#144171,.T.); +#144199 = PLANE('',#144200); +#144200 = AXIS2_PLACEMENT_3D('',#144201,#144202,#144203); +#144201 = CARTESIAN_POINT('',(-4.3,-11.6,-11.2)); +#144202 = DIRECTION('',(-1.,0.,0.)); +#144203 = DIRECTION('',(0.,0.,1.)); +#144204 = ADVANCED_FACE('',(#144205),#144216,.T.); +#144205 = FACE_BOUND('',#144206,.T.); +#144206 = EDGE_LOOP('',(#144207,#144208,#144209,#144215)); +#144207 = ORIENTED_EDGE('',*,*,#144191,.F.); +#144208 = ORIENTED_EDGE('',*,*,#138397,.F.); +#144209 = ORIENTED_EDGE('',*,*,#144210,.T.); +#144210 = EDGE_CURVE('',#138390,#142781,#144211,.T.); +#144211 = LINE('',#144212,#144213); +#144212 = CARTESIAN_POINT('',(-3.3,-11.6,-11.2)); +#144213 = VECTOR('',#144214,1.); +#144214 = DIRECTION('',(0.,0.,1.)); +#144215 = ORIENTED_EDGE('',*,*,#142780,.F.); +#144216 = CYLINDRICAL_SURFACE('',#144217,1.); +#144217 = AXIS2_PLACEMENT_3D('',#144218,#144219,#144220); +#144218 = CARTESIAN_POINT('',(-3.3,-10.6,-15.9626)); +#144219 = DIRECTION('',(0.,0.,1.)); +#144220 = DIRECTION('',(-1.,0.,0.)); +#144221 = ADVANCED_FACE('',(#144222),#144233,.T.); +#144222 = FACE_BOUND('',#144223,.T.); +#144223 = EDGE_LOOP('',(#144224,#144225,#144226,#144227)); +#144224 = ORIENTED_EDGE('',*,*,#142789,.T.); +#144225 = ORIENTED_EDGE('',*,*,#144210,.F.); +#144226 = ORIENTED_EDGE('',*,*,#138389,.F.); +#144227 = ORIENTED_EDGE('',*,*,#144228,.T.); +#144228 = EDGE_CURVE('',#138381,#142790,#144229,.T.); +#144229 = LINE('',#144230,#144231); +#144230 = CARTESIAN_POINT('',(3.3,-11.6,-11.2)); +#144231 = VECTOR('',#144232,1.); +#144232 = DIRECTION('',(0.,0.,1.)); +#144233 = PLANE('',#144234); +#144234 = AXIS2_PLACEMENT_3D('',#144235,#144236,#144237); +#144235 = CARTESIAN_POINT('',(4.3,-11.6,-11.2)); +#144236 = DIRECTION('',(0.,-1.,0.)); +#144237 = DIRECTION('',(0.,0.,-1.)); +#144238 = ADVANCED_FACE('',(#144239),#144245,.T.); +#144239 = FACE_BOUND('',#144240,.T.); +#144240 = EDGE_LOOP('',(#144241,#144242,#144243,#144244)); +#144241 = ORIENTED_EDGE('',*,*,#144228,.F.); +#144242 = ORIENTED_EDGE('',*,*,#138380,.F.); +#144243 = ORIENTED_EDGE('',*,*,#142505,.T.); +#144244 = ORIENTED_EDGE('',*,*,#142797,.F.); +#144245 = CYLINDRICAL_SURFACE('',#144246,1.); +#144246 = AXIS2_PLACEMENT_3D('',#144247,#144248,#144249); +#144247 = CARTESIAN_POINT('',(3.3,-10.6,-15.9626)); +#144248 = DIRECTION('',(0.,0.,1.)); +#144249 = DIRECTION('',(0.,-1.,0.)); +#144250 = ADVANCED_FACE('',(#144251),#144257,.F.); +#144251 = FACE_BOUND('',#144252,.T.); +#144252 = EDGE_LOOP('',(#144253,#144254,#144255,#144256)); +#144253 = ORIENTED_EDGE('',*,*,#142855,.T.); +#144254 = ORIENTED_EDGE('',*,*,#142919,.F.); +#144255 = ORIENTED_EDGE('',*,*,#143011,.F.); +#144256 = ORIENTED_EDGE('',*,*,#142757,.T.); +#144257 = PLANE('',#144258); +#144258 = AXIS2_PLACEMENT_3D('',#144259,#144260,#144261); +#144259 = CARTESIAN_POINT('',(-3.25,-10.8,-8.9)); +#144260 = DIRECTION('',(0.,-1.,0.)); +#144261 = DIRECTION('',(0.,0.,-1.)); +#144262 = ADVANCED_FACE('',(#144263),#144274,.F.); +#144263 = FACE_BOUND('',#144264,.T.); +#144264 = EDGE_LOOP('',(#144265,#144266,#144267,#144273)); +#144265 = ORIENTED_EDGE('',*,*,#142112,.T.); +#144266 = ORIENTED_EDGE('',*,*,#141243,.F.); +#144267 = ORIENTED_EDGE('',*,*,#144268,.F.); +#144268 = EDGE_CURVE('',#138423,#141236,#144269,.T.); +#144269 = LINE('',#144270,#144271); +#144270 = CARTESIAN_POINT('',(-4.4662,-4.4662,-11.2)); +#144271 = VECTOR('',#144272,1.); +#144272 = DIRECTION('',(0.,0.,1.)); +#144273 = ORIENTED_EDGE('',*,*,#138422,.T.); +#144274 = PLANE('',#144275); +#144275 = AXIS2_PLACEMENT_3D('',#144276,#144277,#144278); +#144276 = CARTESIAN_POINT('',(-4.4662,-4.4662,-11.2)); +#144277 = DIRECTION('',(1.,0.,0.)); +#144278 = DIRECTION('',(-0.,1.,0.)); +#144279 = ADVANCED_FACE('',(#144280),#144293,.F.); +#144280 = FACE_BOUND('',#144281,.T.); +#144281 = EDGE_LOOP('',(#144282,#144283,#144284,#144285,#144291,#144292) + ); +#144282 = ORIENTED_EDGE('',*,*,#144268,.T.); +#144283 = ORIENTED_EDGE('',*,*,#141235,.F.); +#144284 = ORIENTED_EDGE('',*,*,#139840,.T.); +#144285 = ORIENTED_EDGE('',*,*,#144286,.T.); +#144286 = EDGE_CURVE('',#139833,#139642,#144287,.T.); +#144287 = LINE('',#144288,#144289); +#144288 = CARTESIAN_POINT('',(-6.,-4.4662,-9.63058359573)); +#144289 = VECTOR('',#144290,1.); +#144290 = DIRECTION('',(-1.,0.,0.)); +#144291 = ORIENTED_EDGE('',*,*,#139641,.F.); +#144292 = ORIENTED_EDGE('',*,*,#138430,.F.); +#144293 = PLANE('',#144294); +#144294 = AXIS2_PLACEMENT_3D('',#144295,#144296,#144297); +#144295 = CARTESIAN_POINT('',(-6.,-4.4662,-11.2)); +#144296 = DIRECTION('',(-0.,1.,0.)); +#144297 = DIRECTION('',(1.,0.,0.)); +#144298 = ADVANCED_FACE('',(#144299),#144310,.T.); +#144299 = FACE_BOUND('',#144300,.T.); +#144300 = EDGE_LOOP('',(#144301,#144307,#144308,#144309)); +#144301 = ORIENTED_EDGE('',*,*,#144302,.T.); +#144302 = EDGE_CURVE('',#139825,#139650,#144303,.T.); +#144303 = LINE('',#144304,#144305); +#144304 = CARTESIAN_POINT('',(-6.,-3.224780407747,-9.63058359573)); +#144305 = VECTOR('',#144306,1.); +#144306 = DIRECTION('',(-1.,0.,0.)); +#144307 = ORIENTED_EDGE('',*,*,#139649,.F.); +#144308 = ORIENTED_EDGE('',*,*,#144286,.F.); +#144309 = ORIENTED_EDGE('',*,*,#139832,.T.); +#144310 = PLANE('',#144311); +#144311 = AXIS2_PLACEMENT_3D('',#144312,#144313,#144314); +#144312 = CARTESIAN_POINT('',(-6.,-4.4662,-9.63058359573)); +#144313 = DIRECTION('',(0.,0.,1.)); +#144314 = DIRECTION('',(1.,0.,-0.)); +#144315 = ADVANCED_FACE('',(#144316),#144327,.T.); +#144316 = FACE_BOUND('',#144317,.T.); +#144317 = EDGE_LOOP('',(#144318,#144324,#144325,#144326)); +#144318 = ORIENTED_EDGE('',*,*,#144319,.T.); +#144319 = EDGE_CURVE('',#139817,#139658,#144320,.T.); +#144320 = LINE('',#144321,#144322); +#144321 = CARTESIAN_POINT('',(-6.,-3.224780407747,-4.790031893223)); +#144322 = VECTOR('',#144323,1.); +#144323 = DIRECTION('',(-1.,0.,0.)); +#144324 = ORIENTED_EDGE('',*,*,#139657,.F.); +#144325 = ORIENTED_EDGE('',*,*,#144302,.F.); +#144326 = ORIENTED_EDGE('',*,*,#139824,.T.); +#144327 = PLANE('',#144328); +#144328 = AXIS2_PLACEMENT_3D('',#144329,#144330,#144331); +#144329 = CARTESIAN_POINT('',(-6.,-3.224780407747,-9.63058359573)); +#144330 = DIRECTION('',(0.,-1.,0.)); +#144331 = DIRECTION('',(0.,0.,-1.)); +#144332 = ADVANCED_FACE('',(#144333),#144340,.T.); +#144333 = FACE_BOUND('',#144334,.T.); +#144334 = EDGE_LOOP('',(#144335,#144336,#144337,#144338,#144339)); +#144335 = ORIENTED_EDGE('',*,*,#139665,.F.); +#144336 = ORIENTED_EDGE('',*,*,#144319,.F.); +#144337 = ORIENTED_EDGE('',*,*,#139816,.T.); +#144338 = ORIENTED_EDGE('',*,*,#136126,.T.); +#144339 = ORIENTED_EDGE('',*,*,#139704,.T.); +#144340 = PLANE('',#144341); +#144341 = AXIS2_PLACEMENT_3D('',#144342,#144343,#144344); +#144342 = CARTESIAN_POINT('',(-6.,-3.224780407747,-4.790031893223)); +#144343 = DIRECTION('',(0.,0.,1.)); +#144344 = DIRECTION('',(1.,0.,-0.)); +#144345 = ADVANCED_FACE('',(#144346),#144358,.T.); +#144346 = FACE_BOUND('',#144347,.T.); +#144347 = EDGE_LOOP('',(#144348,#144349,#144350,#144351)); +#144348 = ORIENTED_EDGE('',*,*,#136076,.F.); +#144349 = ORIENTED_EDGE('',*,*,#139807,.T.); +#144350 = ORIENTED_EDGE('',*,*,#139718,.T.); +#144351 = ORIENTED_EDGE('',*,*,#144352,.F.); +#144352 = EDGE_CURVE('',#136077,#139690,#144353,.T.); +#144353 = CIRCLE('',#144354,1.56746061332); +#144354 = AXIS2_PLACEMENT_3D('',#144355,#144356,#144357); +#144355 = CARTESIAN_POINT('',(-7.1,0.,-4.7)); +#144356 = DIRECTION('',(-1.,0.,0.)); +#144357 = DIRECTION('',(-0.,-0.99834907198,-5.74380577463E-02)); +#144358 = CYLINDRICAL_SURFACE('',#144359,1.56746061332); +#144359 = AXIS2_PLACEMENT_3D('',#144360,#144361,#144362); +#144360 = CARTESIAN_POINT('',(-6.,0.,-4.7)); +#144361 = DIRECTION('',(-1.,0.,0.)); +#144362 = DIRECTION('',(0.,-1.,0.)); +#144363 = ADVANCED_FACE('',(#144364),#144370,.T.); +#144364 = FACE_BOUND('',#144365,.T.); +#144365 = EDGE_LOOP('',(#144366,#144367,#144368,#144369)); +#144366 = ORIENTED_EDGE('',*,*,#139697,.T.); +#144367 = ORIENTED_EDGE('',*,*,#136117,.T.); +#144368 = ORIENTED_EDGE('',*,*,#136084,.T.); +#144369 = ORIENTED_EDGE('',*,*,#144352,.T.); +#144370 = PLANE('',#144371); +#144371 = AXIS2_PLACEMENT_3D('',#144372,#144373,#144374); +#144372 = CARTESIAN_POINT('',(-7.1,0.,-11.2)); +#144373 = DIRECTION('',(-1.,0.,0.)); +#144374 = DIRECTION('',(0.,0.,1.)); +#144375 = ADVANCED_FACE('',(#144376),#144394,.T.); +#144376 = FACE_BOUND('',#144377,.T.); +#144377 = EDGE_LOOP('',(#144378,#144386,#144387,#144388)); +#144378 = ORIENTED_EDGE('',*,*,#144379,.F.); +#144379 = EDGE_CURVE('',#138114,#144380,#144382,.T.); +#144380 = VERTEX_POINT('',#144381); +#144381 = CARTESIAN_POINT('',(5.3,2.4,-7.9)); +#144382 = LINE('',#144383,#144384); +#144383 = CARTESIAN_POINT('',(5.3,2.4,-11.2)); +#144384 = VECTOR('',#144385,1.); +#144385 = DIRECTION('',(0.,0.,1.)); +#144386 = ORIENTED_EDGE('',*,*,#138113,.F.); +#144387 = ORIENTED_EDGE('',*,*,#141132,.T.); +#144388 = ORIENTED_EDGE('',*,*,#144389,.T.); +#144389 = EDGE_CURVE('',#141125,#144380,#144390,.T.); +#144390 = LINE('',#144391,#144392); +#144391 = CARTESIAN_POINT('',(6.,2.4,-7.9)); +#144392 = VECTOR('',#144393,1.); +#144393 = DIRECTION('',(-1.,0.,0.)); +#144394 = PLANE('',#144395); +#144395 = AXIS2_PLACEMENT_3D('',#144396,#144397,#144398); +#144396 = CARTESIAN_POINT('',(6.,2.4,-11.2)); +#144397 = DIRECTION('',(0.,-1.,0.)); +#144398 = DIRECTION('',(0.,0.,-1.)); +#144399 = ADVANCED_FACE('',(#144400),#144450,.F.); +#144400 = FACE_BOUND('',#144401,.T.); +#144401 = EDGE_LOOP('',(#144402,#144403,#144411,#144419,#144427,#144435, + #144443,#144449)); +#144402 = ORIENTED_EDGE('',*,*,#141124,.F.); +#144403 = ORIENTED_EDGE('',*,*,#144404,.F.); +#144404 = EDGE_CURVE('',#144405,#141117,#144407,.T.); +#144405 = VERTEX_POINT('',#144406); +#144406 = CARTESIAN_POINT('',(5.3,-2.4,-7.9)); +#144407 = LINE('',#144408,#144409); +#144408 = CARTESIAN_POINT('',(5.3,-2.4,-7.9)); +#144409 = VECTOR('',#144410,1.); +#144410 = DIRECTION('',(1.,0.,0.)); +#144411 = ORIENTED_EDGE('',*,*,#144412,.F.); +#144412 = EDGE_CURVE('',#144413,#144405,#144415,.T.); +#144413 = VERTEX_POINT('',#144414); +#144414 = CARTESIAN_POINT('',(5.3,-1.19462226592,-7.9)); +#144415 = LINE('',#144416,#144417); +#144416 = CARTESIAN_POINT('',(5.3,-1.19462226592,-7.9)); +#144417 = VECTOR('',#144418,1.); +#144418 = DIRECTION('',(0.,-1.,0.)); +#144419 = ORIENTED_EDGE('',*,*,#144420,.F.); +#144420 = EDGE_CURVE('',#144421,#144413,#144423,.T.); +#144421 = VERTEX_POINT('',#144422); +#144422 = CARTESIAN_POINT('',(4.1,-1.19462226592,-7.9)); +#144423 = LINE('',#144424,#144425); +#144424 = CARTESIAN_POINT('',(4.1,-1.19462226592,-7.9)); +#144425 = VECTOR('',#144426,1.); +#144426 = DIRECTION('',(1.,0.,0.)); +#144427 = ORIENTED_EDGE('',*,*,#144428,.F.); +#144428 = EDGE_CURVE('',#144429,#144421,#144431,.T.); +#144429 = VERTEX_POINT('',#144430); +#144430 = CARTESIAN_POINT('',(4.1,1.19462226592,-7.9)); +#144431 = LINE('',#144432,#144433); +#144432 = CARTESIAN_POINT('',(4.1,1.19462226592,-7.9)); +#144433 = VECTOR('',#144434,1.); +#144434 = DIRECTION('',(0.,-1.,0.)); +#144435 = ORIENTED_EDGE('',*,*,#144436,.F.); +#144436 = EDGE_CURVE('',#144437,#144429,#144439,.T.); +#144437 = VERTEX_POINT('',#144438); +#144438 = CARTESIAN_POINT('',(5.3,1.19462226592,-7.9)); +#144439 = LINE('',#144440,#144441); +#144440 = CARTESIAN_POINT('',(5.3,1.19462226592,-7.9)); +#144441 = VECTOR('',#144442,1.); +#144442 = DIRECTION('',(-1.,0.,0.)); +#144443 = ORIENTED_EDGE('',*,*,#144444,.F.); +#144444 = EDGE_CURVE('',#144380,#144437,#144445,.T.); +#144445 = LINE('',#144446,#144447); +#144446 = CARTESIAN_POINT('',(5.3,2.4,-7.9)); +#144447 = VECTOR('',#144448,1.); +#144448 = DIRECTION('',(0.,-1.,0.)); +#144449 = ORIENTED_EDGE('',*,*,#144389,.F.); +#144450 = PLANE('',#144451); +#144451 = AXIS2_PLACEMENT_3D('',#144452,#144453,#144454); +#144452 = CARTESIAN_POINT('',(0.,0.,-7.9)); +#144453 = DIRECTION('',(0.,0.,1.)); +#144454 = DIRECTION('',(1.,0.,-0.)); +#144455 = ADVANCED_FACE('',(#144456),#144467,.T.); +#144456 = FACE_BOUND('',#144457,.T.); +#144457 = EDGE_LOOP('',(#144458,#144464,#144465,#144466)); +#144458 = ORIENTED_EDGE('',*,*,#144459,.F.); +#144459 = EDGE_CURVE('',#138122,#144437,#144460,.T.); +#144460 = LINE('',#144461,#144462); +#144461 = CARTESIAN_POINT('',(5.3,1.19462226592,-11.2)); +#144462 = VECTOR('',#144463,1.); +#144463 = DIRECTION('',(0.,0.,1.)); +#144464 = ORIENTED_EDGE('',*,*,#138121,.F.); +#144465 = ORIENTED_EDGE('',*,*,#144379,.T.); +#144466 = ORIENTED_EDGE('',*,*,#144444,.T.); +#144467 = PLANE('',#144468); +#144468 = AXIS2_PLACEMENT_3D('',#144469,#144470,#144471); +#144469 = CARTESIAN_POINT('',(5.3,2.4,-11.2)); +#144470 = DIRECTION('',(1.,0.,0.)); +#144471 = DIRECTION('',(-0.,1.,0.)); +#144472 = ADVANCED_FACE('',(#144473),#144491,.T.); +#144473 = FACE_BOUND('',#144474,.T.); +#144474 = EDGE_LOOP('',(#144475,#144481,#144482,#144488,#144489,#144490) + ); +#144475 = ORIENTED_EDGE('',*,*,#144476,.F.); +#144476 = EDGE_CURVE('',#138902,#144429,#144477,.T.); +#144477 = LINE('',#144478,#144479); +#144478 = CARTESIAN_POINT('',(4.1,1.19462226592,-11.4)); +#144479 = VECTOR('',#144480,1.); +#144480 = DIRECTION('',(0.,0.,1.)); +#144481 = ORIENTED_EDGE('',*,*,#138901,.F.); +#144482 = ORIENTED_EDGE('',*,*,#144483,.F.); +#144483 = EDGE_CURVE('',#138130,#138893,#144484,.T.); +#144484 = LINE('',#144485,#144486); +#144485 = CARTESIAN_POINT('',(4.406227607803,1.19462226592,-11.2)); +#144486 = VECTOR('',#144487,1.); +#144487 = DIRECTION('',(0.,0.,-1.)); +#144488 = ORIENTED_EDGE('',*,*,#138129,.F.); +#144489 = ORIENTED_EDGE('',*,*,#144459,.T.); +#144490 = ORIENTED_EDGE('',*,*,#144436,.T.); +#144491 = PLANE('',#144492); +#144492 = AXIS2_PLACEMENT_3D('',#144493,#144494,#144495); +#144493 = CARTESIAN_POINT('',(5.3,1.19462226592,-11.2)); +#144494 = DIRECTION('',(0.,-1.,0.)); +#144495 = DIRECTION('',(0.,0.,-1.)); +#144496 = ADVANCED_FACE('',(#144497),#144508,.T.); +#144497 = FACE_BOUND('',#144498,.T.); +#144498 = EDGE_LOOP('',(#144499,#144500,#144501,#144507)); +#144499 = ORIENTED_EDGE('',*,*,#144483,.T.); +#144500 = ORIENTED_EDGE('',*,*,#138892,.F.); +#144501 = ORIENTED_EDGE('',*,*,#144502,.F.); +#144502 = EDGE_CURVE('',#138138,#138885,#144503,.T.); +#144503 = LINE('',#144504,#144505); +#144504 = CARTESIAN_POINT('',(0.500005473106,4.5378363365,-11.2)); +#144505 = VECTOR('',#144506,1.); +#144506 = DIRECTION('',(0.,0.,-1.)); +#144507 = ORIENTED_EDGE('',*,*,#138137,.T.); +#144508 = CYLINDRICAL_SURFACE('',#144509,4.5653); +#144509 = AXIS2_PLACEMENT_3D('',#144510,#144511,#144512); +#144510 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#144511 = DIRECTION('',(0.,0.,-1.)); +#144512 = DIRECTION('',(-1.,0.,0.)); +#144513 = ADVANCED_FACE('',(#144514),#144525,.T.); +#144514 = FACE_BOUND('',#144515,.T.); +#144515 = EDGE_LOOP('',(#144516,#144517,#144518,#144524)); +#144516 = ORIENTED_EDGE('',*,*,#144502,.T.); +#144517 = ORIENTED_EDGE('',*,*,#138884,.F.); +#144518 = ORIENTED_EDGE('',*,*,#144519,.F.); +#144519 = EDGE_CURVE('',#138147,#138877,#144520,.T.); +#144520 = LINE('',#144521,#144522); +#144521 = CARTESIAN_POINT('',(0.500005473106,6.,-11.2)); +#144522 = VECTOR('',#144523,1.); +#144523 = DIRECTION('',(0.,0.,-1.)); +#144524 = ORIENTED_EDGE('',*,*,#138146,.T.); +#144525 = PLANE('',#144526); +#144526 = AXIS2_PLACEMENT_3D('',#144527,#144528,#144529); +#144527 = CARTESIAN_POINT('',(0.500005473106,6.,-11.2)); +#144528 = DIRECTION('',(1.,0.,0.)); +#144529 = DIRECTION('',(-0.,1.,0.)); +#144530 = ADVANCED_FACE('',(#144531),#144537,.T.); +#144531 = FACE_BOUND('',#144532,.T.); +#144532 = EDGE_LOOP('',(#144533,#144534,#144535,#144536)); +#144533 = ORIENTED_EDGE('',*,*,#144519,.T.); +#144534 = ORIENTED_EDGE('',*,*,#138874,.F.); +#144535 = ORIENTED_EDGE('',*,*,#139127,.F.); +#144536 = ORIENTED_EDGE('',*,*,#138154,.T.); +#144537 = PLANE('',#144538); +#144538 = AXIS2_PLACEMENT_3D('',#144539,#144540,#144541); +#144539 = CARTESIAN_POINT('',(1.875705473106,6.,-11.2)); +#144540 = DIRECTION('',(0.,-1.,0.)); +#144541 = DIRECTION('',(0.,0.,-1.)); +#144542 = ADVANCED_FACE('',(#144543),#144554,.T.); +#144543 = FACE_BOUND('',#144544,.T.); +#144544 = EDGE_LOOP('',(#144545,#144551,#144552,#144553)); +#144545 = ORIENTED_EDGE('',*,*,#144546,.F.); +#144546 = EDGE_CURVE('',#138910,#144421,#144547,.T.); +#144547 = LINE('',#144548,#144549); +#144548 = CARTESIAN_POINT('',(4.1,-1.19462226592,-11.4)); +#144549 = VECTOR('',#144550,1.); +#144550 = DIRECTION('',(0.,0.,1.)); +#144551 = ORIENTED_EDGE('',*,*,#138909,.F.); +#144552 = ORIENTED_EDGE('',*,*,#144476,.T.); +#144553 = ORIENTED_EDGE('',*,*,#144428,.T.); +#144554 = PLANE('',#144555); +#144555 = AXIS2_PLACEMENT_3D('',#144556,#144557,#144558); +#144556 = CARTESIAN_POINT('',(4.1,1.19462226592,-11.2)); +#144557 = DIRECTION('',(1.,0.,0.)); +#144558 = DIRECTION('',(-0.,1.,0.)); +#144559 = ADVANCED_FACE('',(#144560),#144578,.T.); +#144560 = FACE_BOUND('',#144561,.T.); +#144561 = EDGE_LOOP('',(#144562,#144568,#144569,#144575,#144576,#144577) + ); +#144562 = ORIENTED_EDGE('',*,*,#144563,.F.); +#144563 = EDGE_CURVE('',#138301,#144413,#144564,.T.); +#144564 = LINE('',#144565,#144566); +#144565 = CARTESIAN_POINT('',(5.3,-1.19462226592,-11.2)); +#144566 = VECTOR('',#144567,1.); +#144567 = DIRECTION('',(0.,0.,1.)); +#144568 = ORIENTED_EDGE('',*,*,#138300,.F.); +#144569 = ORIENTED_EDGE('',*,*,#144570,.T.); +#144570 = EDGE_CURVE('',#138292,#138918,#144571,.T.); +#144571 = LINE('',#144572,#144573); +#144572 = CARTESIAN_POINT('',(4.406227607803,-1.19462226592,-11.2)); +#144573 = VECTOR('',#144574,1.); +#144574 = DIRECTION('',(0.,0.,-1.)); +#144575 = ORIENTED_EDGE('',*,*,#138917,.F.); +#144576 = ORIENTED_EDGE('',*,*,#144546,.T.); +#144577 = ORIENTED_EDGE('',*,*,#144420,.T.); +#144578 = PLANE('',#144579); +#144579 = AXIS2_PLACEMENT_3D('',#144580,#144581,#144582); +#144580 = CARTESIAN_POINT('',(4.1,-1.19462226592,-11.2)); +#144581 = DIRECTION('',(-0.,1.,0.)); +#144582 = DIRECTION('',(1.,0.,0.)); +#144583 = ADVANCED_FACE('',(#144584),#144595,.T.); +#144584 = FACE_BOUND('',#144585,.T.); +#144585 = EDGE_LOOP('',(#144586,#144592,#144593,#144594)); +#144586 = ORIENTED_EDGE('',*,*,#144587,.T.); +#144587 = EDGE_CURVE('',#138284,#138926,#144588,.T.); +#144588 = LINE('',#144589,#144590); +#144589 = CARTESIAN_POINT('',(-4.406227607803,-1.19462226592,-11.2)); +#144590 = VECTOR('',#144591,1.); +#144591 = DIRECTION('',(0.,0.,-1.)); +#144592 = ORIENTED_EDGE('',*,*,#138925,.F.); +#144593 = ORIENTED_EDGE('',*,*,#144570,.F.); +#144594 = ORIENTED_EDGE('',*,*,#138291,.T.); +#144595 = CYLINDRICAL_SURFACE('',#144596,4.5653); +#144596 = AXIS2_PLACEMENT_3D('',#144597,#144598,#144599); +#144597 = CARTESIAN_POINT('',(0.,0.,-11.2)); +#144598 = DIRECTION('',(0.,0.,-1.)); +#144599 = DIRECTION('',(-1.,0.,0.)); +#144600 = ADVANCED_FACE('',(#144601),#144614,.T.); +#144601 = FACE_BOUND('',#144602,.T.); +#144602 = EDGE_LOOP('',(#144603,#144604,#144610,#144611,#144612,#144613) + ); +#144603 = ORIENTED_EDGE('',*,*,#139540,.T.); +#144604 = ORIENTED_EDGE('',*,*,#144605,.T.); +#144605 = EDGE_CURVE('',#139532,#138935,#144606,.T.); +#144606 = LINE('',#144607,#144608); +#144607 = CARTESIAN_POINT('',(-4.1,-1.19462226592,-6.691944303917)); +#144608 = VECTOR('',#144609,1.); +#144609 = DIRECTION('',(0.,0.,-1.)); +#144610 = ORIENTED_EDGE('',*,*,#138934,.F.); +#144611 = ORIENTED_EDGE('',*,*,#144587,.F.); +#144612 = ORIENTED_EDGE('',*,*,#138283,.F.); +#144613 = ORIENTED_EDGE('',*,*,#139457,.T.); +#144614 = PLANE('',#144615); +#144615 = AXIS2_PLACEMENT_3D('',#144616,#144617,#144618); +#144616 = CARTESIAN_POINT('',(-5.3,-1.19462226592,-11.2)); +#144617 = DIRECTION('',(-0.,1.,0.)); +#144618 = DIRECTION('',(1.,0.,0.)); +#144619 = ADVANCED_FACE('',(#144620),#144626,.T.); +#144620 = FACE_BOUND('',#144621,.T.); +#144621 = EDGE_LOOP('',(#144622,#144623,#144624,#144625)); +#144622 = ORIENTED_EDGE('',*,*,#138942,.F.); +#144623 = ORIENTED_EDGE('',*,*,#144605,.F.); +#144624 = ORIENTED_EDGE('',*,*,#139531,.T.); +#144625 = ORIENTED_EDGE('',*,*,#139368,.F.); +#144626 = PLANE('',#144627); +#144627 = AXIS2_PLACEMENT_3D('',#144628,#144629,#144630); +#144628 = CARTESIAN_POINT('',(-4.1,-1.19462226592,-11.2)); +#144629 = DIRECTION('',(-1.,0.,0.)); +#144630 = DIRECTION('',(0.,0.,1.)); +#144631 = ADVANCED_FACE('',(#144632),#144643,.T.); +#144632 = FACE_BOUND('',#144633,.T.); +#144633 = EDGE_LOOP('',(#144634,#144640,#144641,#144642)); +#144634 = ORIENTED_EDGE('',*,*,#144635,.F.); +#144635 = EDGE_CURVE('',#138309,#144405,#144636,.T.); +#144636 = LINE('',#144637,#144638); +#144637 = CARTESIAN_POINT('',(5.3,-2.4,-11.2)); +#144638 = VECTOR('',#144639,1.); +#144639 = DIRECTION('',(0.,0.,1.)); +#144640 = ORIENTED_EDGE('',*,*,#138308,.F.); +#144641 = ORIENTED_EDGE('',*,*,#144563,.T.); +#144642 = ORIENTED_EDGE('',*,*,#144412,.T.); +#144643 = PLANE('',#144644); +#144644 = AXIS2_PLACEMENT_3D('',#144645,#144646,#144647); +#144645 = CARTESIAN_POINT('',(5.3,-1.19462226592,-11.2)); +#144646 = DIRECTION('',(1.,0.,0.)); +#144647 = DIRECTION('',(-0.,1.,0.)); +#144648 = ADVANCED_FACE('',(#144649),#144655,.T.); +#144649 = FACE_BOUND('',#144650,.T.); +#144650 = EDGE_LOOP('',(#144651,#144652,#144653,#144654)); +#144651 = ORIENTED_EDGE('',*,*,#141116,.F.); +#144652 = ORIENTED_EDGE('',*,*,#138316,.F.); +#144653 = ORIENTED_EDGE('',*,*,#144635,.T.); +#144654 = ORIENTED_EDGE('',*,*,#144404,.T.); +#144655 = PLANE('',#144656); +#144656 = AXIS2_PLACEMENT_3D('',#144657,#144658,#144659); +#144657 = CARTESIAN_POINT('',(5.3,-2.4,-11.2)); +#144658 = DIRECTION('',(-0.,1.,0.)); +#144659 = DIRECTION('',(1.,0.,0.)); +#144660 = ADVANCED_FACE('',(#144661,#144673),#144849,.F.); +#144661 = FACE_BOUND('',#144662,.F.); +#144662 = EDGE_LOOP('',(#144663,#144664,#144665,#144666)); +#144663 = ORIENTED_EDGE('',*,*,#140228,.F.); +#144664 = ORIENTED_EDGE('',*,*,#140166,.F.); +#144665 = ORIENTED_EDGE('',*,*,#140191,.T.); +#144666 = ORIENTED_EDGE('',*,*,#144667,.T.); +#144667 = EDGE_CURVE('',#140192,#140221,#144668,.T.); +#144668 = CIRCLE('',#144669,5.123469387755); +#144669 = AXIS2_PLACEMENT_3D('',#144670,#144671,#144672); +#144670 = CARTESIAN_POINT('',(0.,-2.5,-4.123469387755)); +#144671 = DIRECTION('',(0.,1.,0.)); +#144672 = DIRECTION('',(-0.971069496882,0.,0.23879705238)); +#144673 = FACE_BOUND('',#144674,.F.); +#144674 = EDGE_LOOP('',(#144675,#144685,#144719,#144728,#144764,#144772, + #144806,#144815)); +#144675 = ORIENTED_EDGE('',*,*,#144676,.T.); +#144676 = EDGE_CURVE('',#144677,#144679,#144681,.T.); +#144677 = VERTEX_POINT('',#144678); +#144678 = CARTESIAN_POINT('',(3.390409123479,0.749999999998, + -0.282237223112)); +#144679 = VERTEX_POINT('',#144680); +#144680 = CARTESIAN_POINT('',(3.390409123479,-0.749999999995, + -0.282237223112)); +#144681 = LINE('',#144682,#144683); +#144682 = CARTESIAN_POINT('',(3.390409123479,0.749999999998, + -0.282237223112)); +#144683 = VECTOR('',#144684,1.); +#144684 = DIRECTION('',(0.,-1.,0.)); +#144685 = ORIENTED_EDGE('',*,*,#144686,.F.); +#144686 = EDGE_CURVE('',#144687,#144679,#144689,.T.); +#144687 = VERTEX_POINT('',#144688); +#144688 = CARTESIAN_POINT('',(2.553375765486,-1.750000027202, + 0.318400800296)); +#144689 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#144690,#144691,#144692, + #144693,#144694,#144695,#144696,#144697,#144698,#144699,#144700, + #144701,#144702,#144703,#144704,#144705,#144706,#144707,#144708, + #144709,#144710,#144711,#144712,#144713,#144714,#144715,#144716, + #144717,#144718),.UNSPECIFIED.,.F.,.F.,(4,1,2,2,1,1,2,2,2,1,1,2,2,2, + 2,2,4),(0.,6.25E-02,9.375E-02,0.125,0.1875,0.21875,0.234375,0.25, + 0.375,0.4375,0.46875,0.484375,0.5,0.625,0.6875,0.75,1.), + .UNSPECIFIED.); +#144690 = CARTESIAN_POINT('',(2.553375765486,-1.750000027202, + 0.318400800296)); +#144691 = CARTESIAN_POINT('',(2.591835393404,-1.750000027202, + 0.296292571618)); +#144692 = CARTESIAN_POINT('',(2.6489584321,-1.745354325066, + 0.262458936504)); +#144693 = CARTESIAN_POINT('',(2.705212401867,-1.733740069726, + 0.227651099142)); +#144694 = CARTESIAN_POINT('',(2.742519885132,-1.724448665454, + 0.204233040828)); +#144695 = CARTESIAN_POINT('',(2.762639571193,-1.718503966084, + 0.191407853831)); +#144696 = CARTESIAN_POINT('',(2.813321683232,-1.701495298174, + 0.158676971954)); +#144697 = CARTESIAN_POINT('',(2.86255412395,-1.680991512524, + 0.126036910096)); +#144698 = CARTESIAN_POINT('',(2.917516827378,-1.65095397322, + 8.825870341903E-02)); +#144699 = CARTESIAN_POINT('',(2.940548734474,-1.636770072938, + 7.214719432831E-02)); +#144700 = CARTESIAN_POINT('',(2.955787761702,-1.627022879604, + 6.14253625871E-02)); +#144701 = CARTESIAN_POINT('',(2.964698607635,-1.62107511863, + 5.511384232559E-02)); +#144702 = CARTESIAN_POINT('',(3.020095393455,-1.58294821994, + 1.568696897127E-02)); +#144703 = CARTESIAN_POINT('',(3.065229876324,-1.544330438365, + -1.774221839902E-02)); +#144704 = CARTESIAN_POINT('',(3.127110055239,-1.479312958562, + -6.492357997527E-02)); +#144705 = CARTESIAN_POINT('',(3.156594419965,-1.4450315168, + -8.777524973698E-02)); +#144706 = CARTESIAN_POINT('',(3.188514949818,-1.401934273156, + -0.113041061813)); +#144707 = CARTESIAN_POINT('',(3.20167129664,-1.382799262682, + -0.123560606733)); +#144708 = CARTESIAN_POINT('',(3.210326552687,-1.369894863877, + -0.130503976768)); +#144709 = CARTESIAN_POINT('',(3.215350103809,-1.362187840382, + -0.134549478893)); +#144710 = CARTESIAN_POINT('',(3.246477747491,-1.313417173006, + -0.159685138093)); +#144711 = CARTESIAN_POINT('',(3.270729894876,-1.268284204279, + -0.179738447902)); +#144712 = CARTESIAN_POINT('',(3.302192415346,-1.197912854601, + -0.20611682253)); +#144713 = CARTESIAN_POINT('',(3.311860160549,-1.174010421943, + -0.214293479465)); +#144714 = CARTESIAN_POINT('',(3.329584991273,-1.125314924432, + -0.229379276974)); +#144715 = CARTESIAN_POINT('',(3.337205835417,-1.102037572859, + -0.235912427381)); +#144716 = CARTESIAN_POINT('',(3.375707237063,-0.9682671017, + -0.269096200043)); +#144717 = CARTESIAN_POINT('',(3.390716178057,-0.85983927549, + -0.282508240482)); +#144718 = CARTESIAN_POINT('',(3.390409123479,-0.749999999995, + -0.282237223112)); +#144719 = ORIENTED_EDGE('',*,*,#144720,.T.); +#144720 = EDGE_CURVE('',#144687,#144721,#144723,.T.); +#144721 = VERTEX_POINT('',#144722); +#144722 = CARTESIAN_POINT('',(-2.553375753949,-1.75,0.318400806928)); +#144723 = CIRCLE('',#144724,5.123469387755); +#144724 = AXIS2_PLACEMENT_3D('',#144725,#144726,#144727); +#144725 = CARTESIAN_POINT('',(0.,-1.75,-4.123469387755)); +#144726 = DIRECTION('',(0.,-1.,0.)); +#144727 = DIRECTION('',(0.49836845756,0.,0.86696532832)); +#144728 = ORIENTED_EDGE('',*,*,#144729,.F.); +#144729 = EDGE_CURVE('',#144730,#144721,#144732,.T.); +#144730 = VERTEX_POINT('',#144731); +#144731 = CARTESIAN_POINT('',(-3.390409123479,-0.749999999998, + -0.282237223112)); +#144732 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#144733,#144734,#144735, + #144736,#144737,#144738,#144739,#144740,#144741,#144742,#144743, + #144744,#144745,#144746,#144747,#144748,#144749,#144750,#144751, + #144752,#144753,#144754,#144755,#144756,#144757,#144758,#144759, + #144760,#144761,#144762,#144763),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,1, + 1,2,2,2,1,1,2,2,1,2,2,4),(0.,0.125,0.1875,0.25,0.375,0.4375,0.46875, + 0.484375,0.5,0.625,0.6875,0.71875,0.734375,0.75,0.8125,0.84375,0.875 + ,1.),.UNSPECIFIED.); +#144733 = CARTESIAN_POINT('',(-3.390409123479,-0.749999999998, + -0.282237223112)); +#144734 = CARTESIAN_POINT('',(-3.390563659915,-0.805259155858, + -0.282373622506)); +#144735 = CARTESIAN_POINT('',(-3.386826950591,-0.860159496661, + -0.279064938177)); +#144736 = CARTESIAN_POINT('',(-3.375339888795,-0.94197178528, + -0.268985615334)); +#144737 = CARTESIAN_POINT('',(-3.370529554621,-0.969152844389, + -0.264774237166)); +#144738 = CARTESIAN_POINT('',(-3.358927119701,-1.023335555079, + -0.254670304281)); +#144739 = CARTESIAN_POINT('',(-3.351671773656,-1.051936245503, + -0.248378603559)); +#144740 = CARTESIAN_POINT('',(-3.329672468137,-1.127874972419, + -0.229423341612)); +#144741 = CARTESIAN_POINT('',(-3.31181105123,-1.176704516675, + -0.214171671453)); +#144742 = CARTESIAN_POINT('',(-3.280063266016,-1.247254422527, + -0.187568707503)); +#144743 = CARTESIAN_POINT('',(-3.262949624758,-1.281855772819, + -0.173336992685)); +#144744 = CARTESIAN_POINT('',(-3.240770127211,-1.32104521022, + -0.155160737773)); +#144745 = CARTESIAN_POINT('',(-3.23078506908,-1.337588082404, + -0.147040667637)); +#144746 = CARTESIAN_POINT('',(-3.224021202984,-1.348560530307, + -0.141554671003)); +#144747 = CARTESIAN_POINT('',(-3.221302756632,-1.352902811362, + -0.139353886268)); +#144748 = CARTESIAN_POINT('',(-3.183444613679,-1.411816510034, + -0.108810184934)); +#144749 = CARTESIAN_POINT('',(-3.146157148943,-1.459503328814, + -7.942351786949E-02)); +#144750 = CARTESIAN_POINT('',(-3.084467269569,-1.524012186924, + -3.242202316758E-02)); +#144751 = CARTESIAN_POINT('',(-3.0521820981,-1.554511273464, + -8.192325811313E-03)); +#144752 = CARTESIAN_POINT('',(-3.011923904931,-1.587021691693, + 2.124090267717E-02)); +#144753 = CARTESIAN_POINT('',(-2.994106992651,-1.600296474634, + 3.409197413062E-02)); +#144754 = CARTESIAN_POINT('',(-2.982102965513,-1.609000051385, + 4.271052487014E-02)); +#144755 = CARTESIAN_POINT('',(-2.97738356562,-1.61235528876, + 4.608811925993E-02)); +#144756 = CARTESIAN_POINT('',(-2.940012566622,-1.637999896564, + 7.267298557369E-02)); +#144757 = CARTESIAN_POINT('',(-2.893802537811,-1.665310988887, + 0.104820589816)); +#144758 = CARTESIAN_POINT('',(-2.84549123609,-1.687428425647, + 0.137223316626)); +#144759 = CARTESIAN_POINT('',(-2.812810929807,-1.701019237805, + 0.158868451439)); +#144760 = CARTESIAN_POINT('',(-2.797860756842,-1.706691965489, + 0.168662448565)); +#144761 = CARTESIAN_POINT('',(-2.705649855954,-1.73762629526, + 0.228209436377)); +#144762 = CARTESIAN_POINT('',(-2.630280788851,-1.750000027168, + 0.274192519359)); +#144763 = CARTESIAN_POINT('',(-2.553375753949,-1.75,0.318400806928)); +#144764 = ORIENTED_EDGE('',*,*,#144765,.F.); +#144765 = EDGE_CURVE('',#144766,#144730,#144768,.T.); +#144766 = VERTEX_POINT('',#144767); +#144767 = CARTESIAN_POINT('',(-3.390409123479,0.75,-0.282237223112)); +#144768 = LINE('',#144769,#144770); +#144769 = CARTESIAN_POINT('',(-3.390409123479,0.75,-0.282237223112)); +#144770 = VECTOR('',#144771,1.); +#144771 = DIRECTION('',(0.,-1.,0.)); +#144772 = ORIENTED_EDGE('',*,*,#144773,.F.); +#144773 = EDGE_CURVE('',#144774,#144766,#144776,.T.); +#144774 = VERTEX_POINT('',#144775); +#144775 = CARTESIAN_POINT('',(-2.553375765595,1.750000027202, + 0.318400800233)); +#144776 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#144777,#144778,#144779, + #144780,#144781,#144782,#144783,#144784,#144785,#144786,#144787, + #144788,#144789,#144790,#144791,#144792,#144793,#144794,#144795, + #144796,#144797,#144798,#144799,#144800,#144801,#144802,#144803, + #144804,#144805),.UNSPECIFIED.,.F.,.F.,(4,1,2,2,1,1,2,2,2,1,1,2,2,2, + 2,2,4),(0.,6.25E-02,9.375E-02,0.125,0.1875,0.21875,0.234375,0.25, + 0.375,0.4375,0.46875,0.484375,0.5,0.625,0.6875,0.75,1.), + .UNSPECIFIED.); +#144777 = CARTESIAN_POINT('',(-2.553375765595,1.750000027202, + 0.318400800233)); +#144778 = CARTESIAN_POINT('',(-2.591822870422,1.750000027202, + 0.296299770358)); +#144779 = CARTESIAN_POINT('',(-2.648927628976,1.7453572037, + 0.262477292564)); +#144780 = CARTESIAN_POINT('',(-2.705164084671,1.733750144945, + 0.227681103667)); +#144781 = CARTESIAN_POINT('',(-2.742460062927,1.724464497941, + 0.204270914903)); +#144782 = CARTESIAN_POINT('',(-2.762558696545,1.718528485148, + 0.191459686906)); +#144783 = CARTESIAN_POINT('',(-2.813270221736,1.701515347265, + 0.158710996412)); +#144784 = CARTESIAN_POINT('',(-2.86252908475,1.681004494602, + 0.126054070356)); +#144785 = CARTESIAN_POINT('',(-2.917517590162,1.65095416563, + 8.825824027922E-02)); +#144786 = CARTESIAN_POINT('',(-2.940559501432,1.636763810171, + 7.213965694501E-02)); +#144787 = CARTESIAN_POINT('',(-2.955804966446,1.627012096966, + 6.141321964989E-02)); +#144788 = CARTESIAN_POINT('',(-2.964724063029,1.621058349333, + 5.509577690783E-02)); +#144789 = CARTESIAN_POINT('',(-3.020101416956,1.582941730062, + 1.568226795822E-02)); +#144790 = CARTESIAN_POINT('',(-3.065221928288,1.544335266588, + -1.773646058437E-02)); +#144791 = CARTESIAN_POINT('',(-3.127085710974,1.479338035193, + -6.490486733711E-02)); +#144792 = CARTESIAN_POINT('',(-3.156563018517,1.44506753545, + -8.775074049078E-02)); +#144793 = CARTESIAN_POINT('',(-3.188477234982,1.401984488669, + -0.113011087215)); +#144794 = CARTESIAN_POINT('',(-3.20163127998,1.382855869246, + -0.123528577632)); +#144795 = CARTESIAN_POINT('',(-3.210285090427,1.369955799294, + -0.130470642999)); +#144796 = CARTESIAN_POINT('',(-3.215305928207,1.36225438386, + -0.134513868689)); +#144797 = CARTESIAN_POINT('',(-3.246446178775,1.31347312364, + -0.159659155933)); +#144798 = CARTESIAN_POINT('',(-3.270707592716,1.268329376523, + -0.179719884814)); +#144799 = CARTESIAN_POINT('',(-3.302181293515,1.197939815464, + -0.206107430397)); +#144800 = CARTESIAN_POINT('',(-3.311852311753,1.174030971713, + -0.21428681893)); +#144801 = CARTESIAN_POINT('',(-3.329582806324,1.125321970752, + -0.229377397689)); +#144802 = CARTESIAN_POINT('',(-3.337208378613,1.10202944316, + -0.235914611835)); +#144803 = CARTESIAN_POINT('',(-3.375707893737,0.968262225353, + -0.269096795979)); +#144804 = CARTESIAN_POINT('',(-3.390716128098,0.859836892154, + -0.282508196386)); +#144805 = CARTESIAN_POINT('',(-3.390409123479,0.75,-0.282237223112)); +#144806 = ORIENTED_EDGE('',*,*,#144807,.F.); +#144807 = EDGE_CURVE('',#144808,#144774,#144810,.T.); +#144808 = VERTEX_POINT('',#144809); +#144809 = CARTESIAN_POINT('',(2.553375753949,1.75,0.318400806928)); +#144810 = CIRCLE('',#144811,5.123469387755); +#144811 = AXIS2_PLACEMENT_3D('',#144812,#144813,#144814); +#144812 = CARTESIAN_POINT('',(0.,1.75,-4.123469387755)); +#144813 = DIRECTION('',(0.,-1.,0.)); +#144814 = DIRECTION('',(0.498368500074,0.,0.866965303881)); +#144815 = ORIENTED_EDGE('',*,*,#144816,.F.); +#144816 = EDGE_CURVE('',#144677,#144808,#144817,.T.); +#144817 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#144818,#144819,#144820, + #144821,#144822,#144823,#144824,#144825,#144826,#144827,#144828, + #144829,#144830,#144831,#144832,#144833,#144834,#144835,#144836, + #144837,#144838,#144839,#144840,#144841,#144842,#144843,#144844, + #144845,#144846,#144847,#144848),.UNSPECIFIED.,.F.,.F.,(4,2,2,2,2,1, + 1,2,2,2,1,1,2,2,1,2,2,4),(0.,0.125,0.1875,0.25,0.375,0.4375,0.46875, + 0.484375,0.5,0.625,0.6875,0.71875,0.734375,0.75,0.8125,0.84375,0.875 + ,1.),.UNSPECIFIED.); +#144818 = CARTESIAN_POINT('',(3.390409123479,0.749999999998, + -0.282237223112)); +#144819 = CARTESIAN_POINT('',(3.390563690382,0.805262540486, + -0.282373649398)); +#144820 = CARTESIAN_POINT('',(3.386826552931,0.860166132244, + -0.279064584705)); +#144821 = CARTESIAN_POINT('',(3.375338150557,0.941983096787, + -0.268984092391)); +#144822 = CARTESIAN_POINT('',(3.370527252896,0.969165681119, + -0.264772224841)); +#144823 = CARTESIAN_POINT('',(3.358923453268,1.023351375417, + -0.254667119264)); +#144824 = CARTESIAN_POINT('',(3.351664646496,1.051962599221, + -0.248372444848)); +#144825 = CARTESIAN_POINT('',(3.329670549893,1.127878376066, + -0.229421724286)); +#144826 = CARTESIAN_POINT('',(3.311814315412,1.176694052398, + -0.214174500656)); +#144827 = CARTESIAN_POINT('',(3.280077003279,1.24722530455, + -0.187580171641)); +#144828 = CARTESIAN_POINT('',(3.262969274317,1.281817865039, + -0.173353264357)); +#144829 = CARTESIAN_POINT('',(3.240797895391,1.320997987499, + -0.15518342682)); +#144830 = CARTESIAN_POINT('',(3.230816582932,1.337537068958, + -0.147066274117)); +#144831 = CARTESIAN_POINT('',(3.224055273646,1.348507034466, + -0.141582258871)); +#144832 = CARTESIAN_POINT('',(3.221340278106,1.352844579768, + -0.139384222585)); +#144833 = CARTESIAN_POINT('',(3.183474897436,1.41177916283, + -0.108834106282)); +#144834 = CARTESIAN_POINT('',(3.146178175681,1.459482043392, + -7.943967728376E-02)); +#144835 = CARTESIAN_POINT('',(3.084469837604,1.524011240996, + -3.2423910199E-02)); +#144836 = CARTESIAN_POINT('',(3.052174292433,1.554519558988, + -8.186421534089E-03)); +#144837 = CARTESIAN_POINT('',(3.01190191062,1.587039105228, + 2.125691775317E-02)); +#144838 = CARTESIAN_POINT('',(2.994078461096,1.600317448312, + 3.411252606085E-02)); +#144839 = CARTESIAN_POINT('',(2.982069973323,1.609023320301, + 4.273414489794E-02)); +#144840 = CARTESIAN_POINT('',(2.977342961085,1.612383440527, + 4.611710549134E-02)); +#144841 = CARTESIAN_POINT('',(2.93998694946,1.638014523836, + 7.269080334846E-02)); +#144842 = CARTESIAN_POINT('',(2.893797610411,1.665312043999, + 0.104823656748)); +#144843 = CARTESIAN_POINT('',(2.845511233623,1.687419894449, + 0.137209913187)); +#144844 = CARTESIAN_POINT('',(2.812848504772,1.70100520148, + 0.158843722628)); +#144845 = CARTESIAN_POINT('',(2.797921804512,1.70667071718, + 0.168622681547)); +#144846 = CARTESIAN_POINT('',(2.705688682054,1.737620224314, + 0.228185738204)); +#144847 = CARTESIAN_POINT('',(2.630300739704,1.750000027168, + 0.274181050762)); +#144848 = CARTESIAN_POINT('',(2.553375753949,1.75,0.318400806928)); +#144849 = CYLINDRICAL_SURFACE('',#144850,5.123469387755); +#144850 = AXIS2_PLACEMENT_3D('',#144851,#144852,#144853); +#144851 = CARTESIAN_POINT('',(0.,2.5,-4.123469387755)); +#144852 = DIRECTION('',(0.,-1.,0.)); +#144853 = DIRECTION('',(1.,0.,0.)); +#144854 = ADVANCED_FACE('',(#144855),#144863,.T.); +#144855 = FACE_BOUND('',#144856,.T.); +#144856 = EDGE_LOOP('',(#144857,#144858,#144859,#144860,#144861,#144862) + ); +#144857 = ORIENTED_EDGE('',*,*,#140014,.T.); +#144858 = ORIENTED_EDGE('',*,*,#140199,.T.); +#144859 = ORIENTED_EDGE('',*,*,#144667,.T.); +#144860 = ORIENTED_EDGE('',*,*,#140220,.T.); +#144861 = ORIENTED_EDGE('',*,*,#139964,.T.); +#144862 = ORIENTED_EDGE('',*,*,#140143,.F.); +#144863 = PLANE('',#144864); +#144864 = AXIS2_PLACEMENT_3D('',#144865,#144866,#144867); +#144865 = CARTESIAN_POINT('',(0.,-2.5,0.)); +#144866 = DIRECTION('',(0.,-1.,0.)); +#144867 = DIRECTION('',(0.,0.,-1.)); +#144868 = ADVANCED_FACE('',(#144869),#144885,.F.); +#144869 = FACE_BOUND('',#144870,.T.); +#144870 = EDGE_LOOP('',(#144871,#144877,#144878,#144884)); +#144871 = ORIENTED_EDGE('',*,*,#144872,.T.); +#144872 = EDGE_CURVE('',#139898,#144677,#144873,.T.); +#144873 = LINE('',#144874,#144875); +#144874 = CARTESIAN_POINT('',(4.05215,0.749999830679,0.467495404124)); +#144875 = VECTOR('',#144876,1.); +#144876 = DIRECTION('',(-0.661740876521,1.693197585473E-07, + -0.749732627236)); +#144877 = ORIENTED_EDGE('',*,*,#144676,.T.); +#144878 = ORIENTED_EDGE('',*,*,#144879,.F.); +#144879 = EDGE_CURVE('',#139919,#144679,#144880,.T.); +#144880 = LINE('',#144881,#144882); +#144881 = CARTESIAN_POINT('',(4.05215,-0.750000018887,0.467495404124)); +#144882 = VECTOR('',#144883,1.); +#144883 = DIRECTION('',(-0.661740876521,1.889140877065E-08, + -0.749732627236)); +#144884 = ORIENTED_EDGE('',*,*,#139918,.F.); +#144885 = PLANE('',#144886); +#144886 = AXIS2_PLACEMENT_3D('',#144887,#144888,#144889); +#144887 = CARTESIAN_POINT('',(3.357322079653,0.,-0.319723854473)); +#144888 = DIRECTION('',(0.749732627236,0.,-0.661740876521)); +#144889 = DIRECTION('',(0.,-1.,0.)); +#144890 = ADVANCED_FACE('',(#144891),#144902,.T.); +#144891 = FACE_BOUND('',#144892,.T.); +#144892 = EDGE_LOOP('',(#144893,#144894,#144895,#144901)); +#144893 = ORIENTED_EDGE('',*,*,#144879,.T.); +#144894 = ORIENTED_EDGE('',*,*,#144686,.F.); +#144895 = ORIENTED_EDGE('',*,*,#144896,.F.); +#144896 = EDGE_CURVE('',#139927,#144687,#144897,.T.); +#144897 = LINE('',#144898,#144899); +#144898 = CARTESIAN_POINT('',(3.052148090245,-1.75,1.185133948138)); +#144899 = VECTOR('',#144900,1.); +#144900 = DIRECTION('',(-0.498772279492,-2.720235722929E-08, + -0.86673306918)); +#144901 = ORIENTED_EDGE('',*,*,#139926,.F.); +#144902 = B_SPLINE_SURFACE_WITH_KNOTS('',3,3,( + (#144903,#144904,#144905,#144906) + ,(#144907,#144908,#144909,#144910) + ,(#144911,#144912,#144913,#144914) + ,(#144915,#144916,#144917,#144918) + ,(#144919,#144920,#144921,#144922) + ,(#144923,#144924,#144925,#144926) + ,(#144927,#144928,#144929,#144930) + ,(#144931,#144932,#144933,#144934) + ,(#144935,#144936,#144937,#144938) + ,(#144939,#144940,#144941,#144942) + ,(#144943,#144944,#144945,#144946) + ,(#144947,#144948,#144949,#144950) + ,(#144951,#144952,#144953,#144954) + ,(#144955,#144956,#144957,#144958) + ,(#144959,#144960,#144961,#144962) + ,(#144963,#144964,#144965,#144966) + ,(#144967,#144968,#144969,#144970) + ,(#144971,#144972,#144973,#144974 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(4,4) + ,(-1.365045842768E-02,0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.,1.016577115733),( + -1.863606808664E-02,0.494825179881),.UNSPECIFIED.); +#144903 = CARTESIAN_POINT('',(3.048032763479,-1.749736899111, + 1.232573215552)); +#144904 = CARTESIAN_POINT('',(2.870261728119,-1.749736899111, + 0.920191652456)); +#144905 = CARTESIAN_POINT('',(2.692490692759,-1.749736899111, + 0.607810089359)); +#144906 = CARTESIAN_POINT('',(2.514719657398,-1.749736899111, + 0.295428526263)); +#144907 = CARTESIAN_POINT('',(3.055916664157,-1.749915573829, + 1.228087026272)); +#144908 = CARTESIAN_POINT('',(2.877685814453,-1.749915573829, + 0.915967112107)); +#144909 = CARTESIAN_POINT('',(2.699454964748,-1.749915573829, + 0.603847197941)); +#144910 = CARTESIAN_POINT('',(2.521224115043,-1.749915573829, + 0.291727283775)); +#144911 = CARTESIAN_POINT('',(3.10816799528,-1.750496604282, + 1.19819974509)); +#144912 = CARTESIAN_POINT('',(2.926889680554,-1.750496604282, + 0.887822952909)); +#144913 = CARTESIAN_POINT('',(2.745611365827,-1.750496604282, + 0.577446160728)); +#144914 = CARTESIAN_POINT('',(2.564333051101,-1.750496604282, + 0.267069368547)); +#144915 = CARTESIAN_POINT('',(3.203999112136,-1.744185833227, + 1.141494036819)); +#144916 = CARTESIAN_POINT('',(3.017131619672,-1.744185833227, + 0.834424503205)); +#144917 = CARTESIAN_POINT('',(2.830264127209,-1.744185833227, + 0.527354969592)); +#144918 = CARTESIAN_POINT('',(2.643396634745,-1.744185833227, + 0.220285435978)); +#144919 = CARTESIAN_POINT('',(3.333358637582,-1.718634514435, + 1.060578497374)); +#144920 = CARTESIAN_POINT('',(3.138946483182,-1.718634514435, + 0.75822821724)); +#144921 = CARTESIAN_POINT('',(2.944534328782,-1.718634514435, + 0.455877937105)); +#144922 = CARTESIAN_POINT('',(2.750122174382,-1.718634514435, + 0.153527656971)); +#144923 = CARTESIAN_POINT('',(3.462181338334,-1.674946956069, + 0.975418600913)); +#144924 = CARTESIAN_POINT('',(3.260255831334,-1.674946956069, + 0.678035118756)); +#144925 = CARTESIAN_POINT('',(3.058330324333,-1.674946956069, + 0.380651636599)); +#144926 = CARTESIAN_POINT('',(2.856404817332,-1.674946956069, + 8.32681544422E-02)); +#144927 = CARTESIAN_POINT('',(3.581910922778,-1.615265452736, + 0.89192688504)); +#144928 = CARTESIAN_POINT('',(3.37300240285,-1.615265452736, + 0.599412907225)); +#144929 = CARTESIAN_POINT('',(3.164093882921,-1.615265452736, + 0.306898929409)); +#144930 = CARTESIAN_POINT('',(2.955185362993,-1.615265452736, + 1.438495159378E-02)); +#144931 = CARTESIAN_POINT('',(3.690669506709,-1.541884477514, + 0.812330165201)); +#144932 = CARTESIAN_POINT('',(3.47541783775,-1.541884477514, + 0.52445852308)); +#144933 = CARTESIAN_POINT('',(3.260166168791,-1.541884477514, + 0.23658688096)); +#144934 = CARTESIAN_POINT('',(3.044914499832,-1.541884477514, + -5.128476116078E-02)); +#144935 = CARTESIAN_POINT('',(3.786212229478,-1.457892116633, + 0.739295162574)); +#144936 = CARTESIAN_POINT('',(3.565388202849,-1.457892116633, + 0.45568315578)); +#144937 = CARTESIAN_POINT('',(3.34456417622,-1.457892116633, + 0.172071148985)); +#144938 = CARTESIAN_POINT('',(3.123740149592,-1.457892116633, + -0.111540857809)); +#144939 = CARTESIAN_POINT('',(3.867561704298,-1.365933383544, + 0.674727673163)); +#144940 = CARTESIAN_POINT('',(3.641993115689,-1.365933383544, + 0.394881449198)); +#144941 = CARTESIAN_POINT('',(3.416424527079,-1.365933383544, + 0.115035225232)); +#144942 = CARTESIAN_POINT('',(3.19085593847,-1.365933383544, + -0.164810998733)); +#144943 = CARTESIAN_POINT('',(3.934955193847,-1.268305081254, + 0.619512111339)); +#144944 = CARTESIAN_POINT('',(3.705456001027,-1.268305081254, + 0.342886235827)); +#144945 = CARTESIAN_POINT('',(3.475956808207,-1.268305081254, + 6.626036031393E-02)); +#144946 = CARTESIAN_POINT('',(3.246457615388,-1.268305081254, + -0.210365515199)); +#144947 = CARTESIAN_POINT('',(3.988762904652,-1.166990051694, + 0.574270047716)); +#144948 = CARTESIAN_POINT('',(3.756125473761,-1.166990051694, + 0.30028283429)); +#144949 = CARTESIAN_POINT('',(3.52348804287,-1.166990051694, + 2.629562086366E-02)); +#144950 = CARTESIAN_POINT('',(3.290850611979,-1.166990051694, + -0.247691592562)); +#144951 = CARTESIAN_POINT('',(4.030212059296,-1.061494275619, + 0.538697503736)); +#144952 = CARTESIAN_POINT('',(3.795157180921,-1.061494275619, + 0.266784995034)); +#144953 = CARTESIAN_POINT('',(3.560102302546,-1.061494275619, + -5.127513667557E-03)); +#144954 = CARTESIAN_POINT('',(3.325047424171,-1.061494275619, + -0.277040022369)); +#144955 = CARTESIAN_POINT('',(4.058882907618,-0.954065681543, + 0.513711073595)); +#144956 = CARTESIAN_POINT('',(3.82215585352,-0.954065681543, + 0.243255853545)); +#144957 = CARTESIAN_POINT('',(3.585428799421,-0.954065681543, + -2.719936650519E-02)); +#144958 = CARTESIAN_POINT('',(3.348701745323,-0.954065681543, + -0.297654586555)); +#144959 = CARTESIAN_POINT('',(4.074675327682,-0.850372042708, + 0.49981644477)); +#144960 = CARTESIAN_POINT('',(3.837027209054,-0.850372042708, + 0.230171603986)); +#144961 = CARTESIAN_POINT('',(3.599379090425,-0.850372042708, + -3.947323679892E-02)); +#144962 = CARTESIAN_POINT('',(3.361730971796,-0.850372042708, + -0.309118077584)); +#144963 = CARTESIAN_POINT('',(4.078551268192,-0.775863991844, + 0.496391964351)); +#144964 = CARTESIAN_POINT('',(3.840677092296,-0.775863991844, + 0.226946850235)); +#144965 = CARTESIAN_POINT('',(3.6028029164,-0.775863991844, + -4.249826388122E-02)); +#144966 = CARTESIAN_POINT('',(3.364928740504,-0.775863991844, + -0.311943377997)); +#144967 = CARTESIAN_POINT('',(4.077906060461,-0.735752915475, + 0.496961854111)); +#144968 = CARTESIAN_POINT('',(3.840069515147,-0.735752915475, + 0.227483502198)); +#144969 = CARTESIAN_POINT('',(3.602232969832,-0.735752915475, + -4.199484971414E-02)); +#144970 = CARTESIAN_POINT('',(3.364396424518,-0.735752915475, + -0.311473201627)); +#144971 = CARTESIAN_POINT('',(4.077703357007,-0.728666039686, + 0.497141008736)); +#144972 = CARTESIAN_POINT('',(3.839878634007,-0.728666039686, + 0.227652207952)); +#144973 = CARTESIAN_POINT('',(3.602053911008,-0.728666039686, + -4.183659283208E-02)); +#144974 = CARTESIAN_POINT('',(3.364229188009,-0.728666039686, + -0.311325393616)); +#144975 = ADVANCED_FACE('',(#144976),#144989,.F.); +#144976 = FACE_BOUND('',#144977,.T.); +#144977 = EDGE_LOOP('',(#144978,#144979,#144980,#144981,#144987,#144988) + ); +#144978 = ORIENTED_EDGE('',*,*,#139947,.F.); +#144979 = ORIENTED_EDGE('',*,*,#144896,.T.); +#144980 = ORIENTED_EDGE('',*,*,#144720,.T.); +#144981 = ORIENTED_EDGE('',*,*,#144982,.F.); +#144982 = EDGE_CURVE('',#140032,#144721,#144983,.T.); +#144983 = LINE('',#144984,#144985); +#144984 = CARTESIAN_POINT('',(-3.052148932006,-1.75,1.185133464537)); +#144985 = VECTOR('',#144986,1.); +#144986 = DIRECTION('',(0.498772903509,-2.716771381749E-08, + -0.866732710082)); +#144987 = ORIENTED_EDGE('',*,*,#140031,.F.); +#144988 = ORIENTED_EDGE('',*,*,#140136,.F.); +#144989 = PLANE('',#144990); +#144990 = AXIS2_PLACEMENT_3D('',#144991,#144992,#144993); +#144991 = CARTESIAN_POINT('',(0.,-1.75,0.95)); +#144992 = DIRECTION('',(0.,-1.,0.)); +#144993 = DIRECTION('',(0.,0.,-1.)); +#144994 = ADVANCED_FACE('',(#144995),#145006,.T.); +#144995 = FACE_BOUND('',#144996,.T.); +#144996 = EDGE_LOOP('',(#144997,#144998,#144999,#145005)); +#144997 = ORIENTED_EDGE('',*,*,#144982,.T.); +#144998 = ORIENTED_EDGE('',*,*,#144729,.F.); +#144999 = ORIENTED_EDGE('',*,*,#145000,.F.); +#145000 = EDGE_CURVE('',#140041,#144730,#145001,.T.); +#145001 = LINE('',#145002,#145003); +#145002 = CARTESIAN_POINT('',(-4.05215,-0.749999830679,0.467495404124)); +#145003 = VECTOR('',#145004,1.); +#145004 = DIRECTION('',(0.661740876521,-1.693196887143E-07, + -0.749732627236)); +#145005 = ORIENTED_EDGE('',*,*,#140040,.F.); +#145006 = B_SPLINE_SURFACE_WITH_KNOTS('',3,3,( + (#145007,#145008,#145009,#145010) + ,(#145011,#145012,#145013,#145014) + ,(#145015,#145016,#145017,#145018) + ,(#145019,#145020,#145021,#145022) + ,(#145023,#145024,#145025,#145026) + ,(#145027,#145028,#145029,#145030) + ,(#145031,#145032,#145033,#145034) + ,(#145035,#145036,#145037,#145038) + ,(#145039,#145040,#145041,#145042) + ,(#145043,#145044,#145045,#145046) + ,(#145047,#145048,#145049,#145050) + ,(#145051,#145052,#145053,#145054) + ,(#145055,#145056,#145057,#145058) + ,(#145059,#145060,#145061,#145062) + ,(#145063,#145064,#145065,#145066) + ,(#145067,#145068,#145069,#145070) + ,(#145071,#145072,#145073,#145074) + ,(#145075,#145076,#145077,#145078 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(4,4) + ,(-1.668946036244E-02,0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.,1.013649685127),( + -1.863622726794E-02,0.494825181345),.UNSPECIFIED.); +#145007 = CARTESIAN_POINT('',(-4.077699407795,-0.72852251267, + 0.497144945213)); +#145008 = CARTESIAN_POINT('',(-3.83987485362,-0.72852251267, + 0.227655845145)); +#145009 = CARTESIAN_POINT('',(-3.602050299444,-0.72852251267, + -4.183325492316E-02)); +#145010 = CARTESIAN_POINT('',(-3.364225745268,-0.72852251267, + -0.311322354991)); +#145011 = CARTESIAN_POINT('',(-4.077904703625,-0.735656882494, + 0.496963498541)); +#145012 = CARTESIAN_POINT('',(-3.840068175935,-0.735656882494, + 0.227484981027)); +#145013 = CARTESIAN_POINT('',(-3.602231648246,-0.735656882494, + -4.199353648769E-02)); +#145014 = CARTESIAN_POINT('',(-3.364395120557,-0.735656882494, + -0.311472054002)); +#145015 = CARTESIAN_POINT('',(-4.078554089107,-0.775814195523, + 0.49638991815)); +#145016 = CARTESIAN_POINT('',(-3.840679687167,-0.775814195523, + 0.226944853691)); +#145017 = CARTESIAN_POINT('',(-3.602805285226,-0.775814195523, + -4.250021076916E-02)); +#145018 = CARTESIAN_POINT('',(-3.364930883285,-0.775814195523, + -0.311945275229)); +#145019 = CARTESIAN_POINT('',(-4.074675673775,-0.850370226872, + 0.499816584803)); +#145020 = CARTESIAN_POINT('',(-3.8370274735,-0.850370226872, + 0.230171666115)); +#145021 = CARTESIAN_POINT('',(-3.599379273225,-0.850370226872, + -3.947325257349E-02)); +#145022 = CARTESIAN_POINT('',(-3.361731072949,-0.850370226872, + -0.309118171262)); +#145023 = CARTESIAN_POINT('',(-4.058883589319,-0.954063678941, + 0.513710920957)); +#145024 = CARTESIAN_POINT('',(-3.822156434239,-0.954063678941, + 0.243255639863)); +#145025 = CARTESIAN_POINT('',(-3.585429279158,-0.954063678941, + -2.719964123099E-02)); +#145026 = CARTESIAN_POINT('',(-3.348702124078,-0.954063678941, + -0.297654922325)); +#145027 = CARTESIAN_POINT('',(-4.030212333253,-1.061494402057, + 0.538697711905)); +#145028 = CARTESIAN_POINT('',(-3.795157378109,-1.061494402057, + 0.26678512074)); +#145029 = CARTESIAN_POINT('',(-3.560102422965,-1.061494402057, + -5.127470426162E-03)); +#145030 = CARTESIAN_POINT('',(-3.325047467822,-1.061494402057, + -0.277040061592)); +#145031 = CARTESIAN_POINT('',(-3.988762279221,-1.166992032981, + 0.574271022826)); +#145032 = CARTESIAN_POINT('',(-3.756124824641,-1.166992032981, + 0.300283681669)); +#145033 = CARTESIAN_POINT('',(-3.523487370062,-1.166992032981, + 2.629634051169E-02)); +#145034 = CARTESIAN_POINT('',(-3.290849915483,-1.166992032981, + -0.247691000645)); +#145035 = CARTESIAN_POINT('',(-3.934953614853,-1.268308119637, + 0.619513862406)); +#145036 = CARTESIAN_POINT('',(-3.705454454771,-1.268308119637, + 0.342887813223)); +#145037 = CARTESIAN_POINT('',(-3.47595529469,-1.268308119637, + 6.626176404082E-02)); +#145038 = CARTESIAN_POINT('',(-3.246456134608,-1.268308119637, + -0.210364285142)); +#145039 = CARTESIAN_POINT('',(-3.867559223555,-1.365936836859, + 0.674730108613)); +#145040 = CARTESIAN_POINT('',(-3.641990721293,-1.365936836859, + 0.39488367023)); +#145041 = CARTESIAN_POINT('',(-3.416422219031,-1.365936836859, + 0.115037231846)); +#145042 = CARTESIAN_POINT('',(-3.19085371677,-1.365936836859, + -0.164809206537)); +#145043 = CARTESIAN_POINT('',(-3.786209346999,-1.457895056906, + 0.739297828654)); +#145044 = CARTESIAN_POINT('',(-3.565385431375,-1.457895056906, + 0.455685593017)); +#145045 = CARTESIAN_POINT('',(-3.344561515752,-1.457895056906, + 0.172073357379)); +#145046 = CARTESIAN_POINT('',(-3.123737600128,-1.457895056906, + -0.111538878258)); +#145047 = CARTESIAN_POINT('',(-3.690667534632,-1.541886155483, + 0.812332039485)); +#145048 = CARTESIAN_POINT('',(-3.475415925021,-1.541886155483, + 0.5244602136)); +#145049 = CARTESIAN_POINT('',(-3.260164315411,-1.541886155483, + 0.236588387715)); +#145050 = CARTESIAN_POINT('',(-3.044912705801,-1.541886155483, + -5.128343817023E-02)); +#145051 = CARTESIAN_POINT('',(-3.581910612616,-1.61526570164, + 0.891927504302)); +#145052 = CARTESIAN_POINT('',(-3.373002056749,-1.61526570164, + 0.599413414718)); +#145053 = CARTESIAN_POINT('',(-3.164093500882,-1.61526570164, + 0.306899325135)); +#145054 = CARTESIAN_POINT('',(-2.955184945015,-1.61526570164, + 1.438523555081E-02)); +#145055 = CARTESIAN_POINT('',(-3.462181243967,-1.674947077643, + 0.975419074078)); +#145056 = CARTESIAN_POINT('',(-3.260255690248,-1.674947077643, + 0.678035487415)); +#145057 = CARTESIAN_POINT('',(-3.058330136528,-1.674947077643, + 0.380651900751)); +#145058 = CARTESIAN_POINT('',(-2.856404582808,-1.674947077643, + 8.326831408709E-02)); +#145059 = CARTESIAN_POINT('',(-3.333358069252,-1.718634725344, + 1.060579261811)); +#145060 = CARTESIAN_POINT('',(-3.138945897719,-1.718634725344, + 0.758228858897)); +#145061 = CARTESIAN_POINT('',(-2.944533726186,-1.718634725344, + 0.455878455983)); +#145062 = CARTESIAN_POINT('',(-2.750121554653,-1.718634725344, + 0.15352805307)); +#145063 = CARTESIAN_POINT('',(-3.203998822499,-1.744185868609, + 1.141494599373)); +#145064 = CARTESIAN_POINT('',(-3.0171312986,-1.744185868609, + 0.834424953534)); +#145065 = CARTESIAN_POINT('',(-2.830263774701,-1.744185868609, + 0.527355307695)); +#145066 = CARTESIAN_POINT('',(-2.643396250801,-1.744185868609, + 0.220285661856)); +#145067 = CARTESIAN_POINT('',(-3.108168437478,-1.750496584288, + 1.198199868093)); +#145068 = CARTESIAN_POINT('',(-2.926890050078,-1.750496584288, + 0.887822988468)); +#145069 = CARTESIAN_POINT('',(-2.745611662679,-1.750496584288, + 0.577446108842)); +#145070 = CARTESIAN_POINT('',(-2.564333275279,-1.750496584288, + 0.267069229217)); +#145071 = CARTESIAN_POINT('',(-3.055917792396,-1.749915579772, + 1.228086765989)); +#145072 = CARTESIAN_POINT('',(-2.877686830794,-1.749915579772, + 0.915966786283)); +#145073 = CARTESIAN_POINT('',(-2.699455869193,-1.749915579772, + 0.603846806577)); +#145074 = CARTESIAN_POINT('',(-2.521224907591,-1.749915579772, + 0.29172682687)); +#145075 = CARTESIAN_POINT('',(-3.048034376991,-1.749736923419, + 1.232572681885)); +#145076 = CARTESIAN_POINT('',(-2.87026320155,-1.749736923419, + 0.920191069125)); +#145077 = CARTESIAN_POINT('',(-2.692492026109,-1.749736923419, + 0.607809456365)); +#145078 = CARTESIAN_POINT('',(-2.514720850667,-1.749736923419, + 0.295427843605)); +#145079 = ADVANCED_FACE('',(#145080),#145091,.F.); +#145080 = FACE_BOUND('',#145081,.T.); +#145081 = EDGE_LOOP('',(#145082,#145083,#145084,#145090)); +#145082 = ORIENTED_EDGE('',*,*,#145000,.T.); +#145083 = ORIENTED_EDGE('',*,*,#144765,.F.); +#145084 = ORIENTED_EDGE('',*,*,#145085,.F.); +#145085 = EDGE_CURVE('',#140062,#144766,#145086,.T.); +#145086 = LINE('',#145087,#145088); +#145087 = CARTESIAN_POINT('',(-4.05215,0.750000018887,0.467495404124)); +#145088 = VECTOR('',#145089,1.); +#145089 = DIRECTION('',(0.661740876521,-1.888662903848E-08, + -0.749732627236)); +#145090 = ORIENTED_EDGE('',*,*,#140061,.T.); +#145091 = PLANE('',#145092); +#145092 = AXIS2_PLACEMENT_3D('',#145093,#145094,#145095); +#145093 = CARTESIAN_POINT('',(-3.357322079653,0.,-0.319723854473)); +#145094 = DIRECTION('',(-0.749732627236,0.,-0.661740876521)); +#145095 = DIRECTION('',(-0.661740876521,0.,0.749732627236)); +#145096 = ADVANCED_FACE('',(#145097),#145108,.T.); +#145097 = FACE_BOUND('',#145098,.T.); +#145098 = EDGE_LOOP('',(#145099,#145100,#145101,#145107)); +#145099 = ORIENTED_EDGE('',*,*,#145085,.T.); +#145100 = ORIENTED_EDGE('',*,*,#144773,.F.); +#145101 = ORIENTED_EDGE('',*,*,#145102,.F.); +#145102 = EDGE_CURVE('',#140070,#144774,#145103,.T.); +#145103 = LINE('',#145104,#145105); +#145104 = CARTESIAN_POINT('',(-3.052148090245,1.75,1.185133948138)); +#145105 = VECTOR('',#145106,1.); +#145106 = DIRECTION('',(0.498772279383,2.720235722929E-08, + -0.866733069243)); +#145107 = ORIENTED_EDGE('',*,*,#140069,.F.); +#145108 = B_SPLINE_SURFACE_WITH_KNOTS('',3,3,( + (#145109,#145110,#145111,#145112) + ,(#145113,#145114,#145115,#145116) + ,(#145117,#145118,#145119,#145120) + ,(#145121,#145122,#145123,#145124) + ,(#145125,#145126,#145127,#145128) + ,(#145129,#145130,#145131,#145132) + ,(#145133,#145134,#145135,#145136) + ,(#145137,#145138,#145139,#145140) + ,(#145141,#145142,#145143,#145144) + ,(#145145,#145146,#145147,#145148) + ,(#145149,#145150,#145151,#145152) + ,(#145153,#145154,#145155,#145156) + ,(#145157,#145158,#145159,#145160) + ,(#145161,#145162,#145163,#145164) + ,(#145165,#145166,#145167,#145168) + ,(#145169,#145170,#145171,#145172) + ,(#145173,#145174,#145175,#145176) + ,(#145177,#145178,#145179,#145180 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(4,4) + ,(-1.365045842766E-02,0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.,1.01657711573),(-1.863606808664E-02 + ,0.494825179483),.UNSPECIFIED.); +#145109 = CARTESIAN_POINT('',(-3.048032763479,1.749736899111, + 1.232573215552)); +#145110 = CARTESIAN_POINT('',(-2.870261728257,1.749736899111, + 0.920191652698)); +#145111 = CARTESIAN_POINT('',(-2.692490693035,1.749736899111, + 0.607810089844)); +#145112 = CARTESIAN_POINT('',(-2.514719657812,1.749736899111, + 0.295428526991)); +#145113 = CARTESIAN_POINT('',(-3.055916664157,1.749915573829, + 1.228087026272)); +#145114 = CARTESIAN_POINT('',(-2.877685814591,1.749915573829, + 0.915967112349)); +#145115 = CARTESIAN_POINT('',(-2.699454965025,1.749915573829, + 0.603847198425)); +#145116 = CARTESIAN_POINT('',(-2.521224115458,1.749915573829, + 0.291727284502)); +#145117 = CARTESIAN_POINT('',(-3.10816799528,1.750496604282, + 1.19819974509)); +#145118 = CARTESIAN_POINT('',(-2.926889680694,1.750496604282, + 0.88782295315)); +#145119 = CARTESIAN_POINT('',(-2.745611366108,1.750496604282, + 0.57744616121)); +#145120 = CARTESIAN_POINT('',(-2.564333051523,1.750496604282, + 0.26706936927)); +#145121 = CARTESIAN_POINT('',(-3.203999112136,1.744185833227, + 1.141494036819)); +#145122 = CARTESIAN_POINT('',(-3.017131619817,1.744185833227, + 0.834424503444)); +#145123 = CARTESIAN_POINT('',(-2.830264127499,1.744185833227, + 0.527354970068)); +#145124 = CARTESIAN_POINT('',(-2.64339663518,1.744185833227, + 0.220285436693)); +#145125 = CARTESIAN_POINT('',(-3.333358637582,1.718634514435, + 1.060578497374)); +#145126 = CARTESIAN_POINT('',(-3.138946483333,1.718634514435, + 0.758228217474)); +#145127 = CARTESIAN_POINT('',(-2.944534329083,1.718634514435, + 0.455877937575)); +#145128 = CARTESIAN_POINT('',(-2.750122174834,1.718634514435, + 0.153527657675)); +#145129 = CARTESIAN_POINT('',(-3.462181338334,1.674946956069, + 0.975418600913)); +#145130 = CARTESIAN_POINT('',(-3.26025583149,1.674946956069, + 0.678035118987)); +#145131 = CARTESIAN_POINT('',(-3.058330324646,1.674946956069, + 0.380651637061)); +#145132 = CARTESIAN_POINT('',(-2.856404817802,1.674946956069, + 8.326815513456E-02)); +#145133 = CARTESIAN_POINT('',(-3.581910922778,1.615265452736, + 0.89192688504)); +#145134 = CARTESIAN_POINT('',(-3.373002403012,1.615265452736, + 0.599412907452)); +#145135 = CARTESIAN_POINT('',(-3.164093883246,1.615265452736, + 0.306898929863)); +#145136 = CARTESIAN_POINT('',(-2.95518536348,1.615265452736, + 1.43849522748E-02)); +#145137 = CARTESIAN_POINT('',(-3.690669506709,1.541884477514, + 0.812330165201)); +#145138 = CARTESIAN_POINT('',(-3.475417837917,1.541884477514, + 0.524458523304)); +#145139 = CARTESIAN_POINT('',(-3.260166169125,1.541884477514, + 0.236586881407)); +#145140 = CARTESIAN_POINT('',(-3.044914500334,1.541884477514, + -5.128476049057E-02)); +#145141 = CARTESIAN_POINT('',(-3.786212229478,1.457892116633, + 0.739295162574)); +#145142 = CARTESIAN_POINT('',(-3.565388203021,1.457892116633,0.455683156 + )); +#145143 = CARTESIAN_POINT('',(-3.344564176563,1.457892116633, + 0.172071149426)); +#145144 = CARTESIAN_POINT('',(-3.123740150106,1.457892116633, + -0.111540857149)); +#145145 = CARTESIAN_POINT('',(-3.867561704298,1.365933383544, + 0.674727673163)); +#145146 = CARTESIAN_POINT('',(-3.641993115864,1.365933383544, + 0.394881449415)); +#145147 = CARTESIAN_POINT('',(-3.416424527429,1.365933383544, + 0.115035225667)); +#145148 = CARTESIAN_POINT('',(-3.190855938995,1.365933383544, + -0.164810998082)); +#145149 = CARTESIAN_POINT('',(-3.934955193847,1.268305081254, + 0.619512111339)); +#145150 = CARTESIAN_POINT('',(-3.705456001205,1.268305081254, + 0.342886236041)); +#145151 = CARTESIAN_POINT('',(-3.475956808564,1.268305081254, + 6.626036074328E-02)); +#145152 = CARTESIAN_POINT('',(-3.246457615922,1.268305081254, + -0.210365514555)); +#145153 = CARTESIAN_POINT('',(-3.988762904652,1.166990051694, + 0.574270047716)); +#145154 = CARTESIAN_POINT('',(-3.756125473942,1.166990051694, + 0.300282834502)); +#145155 = CARTESIAN_POINT('',(-3.523488043231,1.166990051694, + 2.629562128892E-02)); +#145156 = CARTESIAN_POINT('',(-3.290850612521,1.166990051694, + -0.247691591924)); +#145157 = CARTESIAN_POINT('',(-4.030212059296,1.061494275619, + 0.538697503736)); +#145158 = CARTESIAN_POINT('',(-3.795157181103,1.061494275619, + 0.266784995245)); +#145159 = CARTESIAN_POINT('',(-3.560102302911,1.061494275619, + -5.12751324552E-03)); +#145160 = CARTESIAN_POINT('',(-3.325047424718,1.061494275619, + -0.277040021736)); +#145161 = CARTESIAN_POINT('',(-4.058882907618,0.954065681543, + 0.513711073595)); +#145162 = CARTESIAN_POINT('',(-3.822155853703,0.954065681543, + 0.243255853755)); +#145163 = CARTESIAN_POINT('',(-3.585428799789,0.954065681543, + -2.719936608542E-02)); +#145164 = CARTESIAN_POINT('',(-3.348701745874,0.954065681543, + -0.297654585926)); +#145165 = CARTESIAN_POINT('',(-4.074675327682,0.850372042708, + 0.49981644477)); +#145166 = CARTESIAN_POINT('',(-3.837027209238,0.850372042708, + 0.230171604195)); +#145167 = CARTESIAN_POINT('',(-3.599379090794,0.850372042708, + -3.94732363804E-02)); +#145168 = CARTESIAN_POINT('',(-3.36173097235,0.850372042708, + -0.309118076956)); +#145169 = CARTESIAN_POINT('',(-4.078551268192,0.775863991845, + 0.496391964351)); +#145170 = CARTESIAN_POINT('',(-3.840677092481,0.775863991845, + 0.226946850444)); +#145171 = CARTESIAN_POINT('',(-3.602802916769,0.775863991845, + -4.249826346297E-02)); +#145172 = CARTESIAN_POINT('',(-3.364928741058,0.775863991845, + -0.31194337737)); +#145173 = CARTESIAN_POINT('',(-4.077906060461,0.735752915477, + 0.496961854111)); +#145174 = CARTESIAN_POINT('',(-3.840069515331,0.735752915477, + 0.227483502407)); +#145175 = CARTESIAN_POINT('',(-3.602232970202,0.735752915477, + -4.199484929591E-02)); +#145176 = CARTESIAN_POINT('',(-3.364396425072,0.735752915477, + -0.311473200999)); +#145177 = CARTESIAN_POINT('',(-4.077703357007,0.72866603969, + 0.497141008736)); +#145178 = CARTESIAN_POINT('',(-3.839878634192,0.72866603969, + 0.227652208161)); +#145179 = CARTESIAN_POINT('',(-3.602053911377,0.72866603969, + -4.183659241389E-02)); +#145180 = CARTESIAN_POINT('',(-3.364229188562,0.72866603969, + -0.311325392989)); +#145181 = ADVANCED_FACE('',(#145182),#145195,.F.); +#145182 = FACE_BOUND('',#145183,.T.); +#145183 = EDGE_LOOP('',(#145184,#145185,#145186,#145187,#145193,#145194) + ); +#145184 = ORIENTED_EDGE('',*,*,#140090,.T.); +#145185 = ORIENTED_EDGE('',*,*,#145102,.T.); +#145186 = ORIENTED_EDGE('',*,*,#144807,.F.); +#145187 = ORIENTED_EDGE('',*,*,#145188,.F.); +#145188 = EDGE_CURVE('',#139887,#144808,#145189,.T.); +#145189 = LINE('',#145190,#145191); +#145190 = CARTESIAN_POINT('',(3.052148932006,1.75,1.185133464537)); +#145191 = VECTOR('',#145192,1.); +#145192 = DIRECTION('',(-0.4987729036,2.716771381749E-08,-0.866732710029 + )); +#145193 = ORIENTED_EDGE('',*,*,#139886,.T.); +#145194 = ORIENTED_EDGE('',*,*,#140114,.F.); +#145195 = PLANE('',#145196); +#145196 = AXIS2_PLACEMENT_3D('',#145197,#145198,#145199); +#145197 = CARTESIAN_POINT('',(0.,1.75,0.95)); +#145198 = DIRECTION('',(-0.,1.,0.)); +#145199 = DIRECTION('',(1.,0.,0.)); +#145200 = ADVANCED_FACE('',(#145201),#145207,.T.); +#145201 = FACE_BOUND('',#145202,.T.); +#145202 = EDGE_LOOP('',(#145203,#145204,#145205,#145206)); +#145203 = ORIENTED_EDGE('',*,*,#145188,.T.); +#145204 = ORIENTED_EDGE('',*,*,#144816,.F.); +#145205 = ORIENTED_EDGE('',*,*,#144872,.F.); +#145206 = ORIENTED_EDGE('',*,*,#139897,.F.); +#145207 = B_SPLINE_SURFACE_WITH_KNOTS('',3,3,( + (#145208,#145209,#145210,#145211) + ,(#145212,#145213,#145214,#145215) + ,(#145216,#145217,#145218,#145219) + ,(#145220,#145221,#145222,#145223) + ,(#145224,#145225,#145226,#145227) + ,(#145228,#145229,#145230,#145231) + ,(#145232,#145233,#145234,#145235) + ,(#145236,#145237,#145238,#145239) + ,(#145240,#145241,#145242,#145243) + ,(#145244,#145245,#145246,#145247) + ,(#145248,#145249,#145250,#145251) + ,(#145252,#145253,#145254,#145255) + ,(#145256,#145257,#145258,#145259) + ,(#145260,#145261,#145262,#145263) + ,(#145264,#145265,#145266,#145267) + ,(#145268,#145269,#145270,#145271) + ,(#145272,#145273,#145274,#145275) + ,(#145276,#145277,#145278,#145279 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(4,4) + ,(-1.66894603624E-02,0.,7.692307692308E-02,0.153846153846, + 0.230769230769,0.307692307692,0.384615384615,0.461538461539, + 0.538461538461,0.615384615385,0.692307692308,0.769230769231, + 0.846153846154,0.923076923077,1.,1.013649685127),( + -1.863622726795E-02,0.494825181684),.UNSPECIFIED.); +#145208 = CARTESIAN_POINT('',(4.077699407795,0.72852251267, + 0.497144945213)); +#145209 = CARTESIAN_POINT('',(3.839874853463,0.72852251267, + 0.227655844967)); +#145210 = CARTESIAN_POINT('',(3.60205029913,0.72852251267, + -4.18332552793E-02)); +#145211 = CARTESIAN_POINT('',(3.364225744797,0.72852251267, + -0.311322355526)); +#145212 = CARTESIAN_POINT('',(4.077904703625,0.735656882494, + 0.496963498541)); +#145213 = CARTESIAN_POINT('',(3.840068175778,0.735656882494, + 0.227484980849)); +#145214 = CARTESIAN_POINT('',(3.602231647932,0.735656882494, + -4.199353684381E-02)); +#145215 = CARTESIAN_POINT('',(3.364395120086,0.735656882494, + -0.311472054536)); +#145216 = CARTESIAN_POINT('',(4.078554089107,0.775814195523, + 0.49638991815)); +#145217 = CARTESIAN_POINT('',(3.84067968701,0.775814195523, + 0.226944853513)); +#145218 = CARTESIAN_POINT('',(3.602805284912,0.775814195523, + -4.250021112524E-02)); +#145219 = CARTESIAN_POINT('',(3.364930882814,0.775814195523, + -0.311945275763)); +#145220 = CARTESIAN_POINT('',(4.074675673775,0.850370226872, + 0.499816584803)); +#145221 = CARTESIAN_POINT('',(3.837027473343,0.850370226872, + 0.230171665937)); +#145222 = CARTESIAN_POINT('',(3.599379272911,0.850370226872, + -3.947325292983E-02)); +#145223 = CARTESIAN_POINT('',(3.361731072478,0.850370226872, + -0.309118171796)); +#145224 = CARTESIAN_POINT('',(4.058883589319,0.954063678941, + 0.513710920957)); +#145225 = CARTESIAN_POINT('',(3.822156434082,0.954063678941, + 0.243255639684)); +#145226 = CARTESIAN_POINT('',(3.585429278845,0.954063678941, + -2.719964158841E-02)); +#145227 = CARTESIAN_POINT('',(3.348702123608,0.954063678941, + -0.297654922861)); +#145228 = CARTESIAN_POINT('',(4.030212333253,1.061494402057, + 0.538697711905)); +#145229 = CARTESIAN_POINT('',(3.795157377954,1.061494402057, + 0.26678512056)); +#145230 = CARTESIAN_POINT('',(3.560102422655,1.061494402057, + -5.127470785503E-03)); +#145231 = CARTESIAN_POINT('',(3.325047467356,1.061494402057, + -0.277040062131)); +#145232 = CARTESIAN_POINT('',(3.988762279221,1.166992032981, + 0.574271022826)); +#145233 = CARTESIAN_POINT('',(3.756124824488,1.166992032981, + 0.300283681488)); +#145234 = CARTESIAN_POINT('',(3.523487369755,1.166992032981, + 2.62963401496E-02)); +#145235 = CARTESIAN_POINT('',(3.290849915022,1.166992032981, + -0.247691001188)); +#145236 = CARTESIAN_POINT('',(3.934953614853,1.268308119637, + 0.619513862406)); +#145237 = CARTESIAN_POINT('',(3.70545445462,1.268308119637,0.34288781304 + )); +#145238 = CARTESIAN_POINT('',(3.475955294386,1.268308119637, + 6.626176367525E-02)); +#145239 = CARTESIAN_POINT('',(3.246456134153,1.268308119637, + -0.21036428569)); +#145240 = CARTESIAN_POINT('',(3.867559223555,1.365936836859, + 0.674730108613)); +#145241 = CARTESIAN_POINT('',(3.641990721144,1.365936836859, + 0.394883670045)); +#145242 = CARTESIAN_POINT('',(3.416422218733,1.365936836859, + 0.115037231476)); +#145243 = CARTESIAN_POINT('',(3.190853716323,1.365936836859, + -0.164809207092)); +#145244 = CARTESIAN_POINT('',(3.786209346999,1.457895056906, + 0.739297828654)); +#145245 = CARTESIAN_POINT('',(3.565385431229,1.457895056906, + 0.455685592829)); +#145246 = CARTESIAN_POINT('',(3.34456151546,1.457895056906, + 0.172073357005)); +#145247 = CARTESIAN_POINT('',(3.12373759969,1.457895056906, + -0.11153887882)); +#145248 = CARTESIAN_POINT('',(3.690667534632,1.541886155483, + 0.812332039485)); +#145249 = CARTESIAN_POINT('',(3.475415924879,1.541886155483, + 0.52446021341)); +#145250 = CARTESIAN_POINT('',(3.260164315127,1.541886155483, + 0.236588387335)); +#145251 = CARTESIAN_POINT('',(3.044912705374,1.541886155483, + -5.128343874087E-02)); +#145252 = CARTESIAN_POINT('',(3.581910612616,1.61526570164, + 0.891927504302)); +#145253 = CARTESIAN_POINT('',(3.373002056611,1.61526570164, + 0.599413414525)); +#145254 = CARTESIAN_POINT('',(3.164093500606,1.61526570164, + 0.306899324748)); +#145255 = CARTESIAN_POINT('',(2.955184944601,1.61526570164, + 1.438523497096E-02)); +#145256 = CARTESIAN_POINT('',(3.462181243967,1.674947077643, + 0.975419074078)); +#145257 = CARTESIAN_POINT('',(3.260255690114,1.674947077643, + 0.678035487218)); +#145258 = CARTESIAN_POINT('',(3.058330136261,1.674947077643, + 0.380651900358)); +#145259 = CARTESIAN_POINT('',(2.856404582408,1.674947077643, + 8.326831349759E-02)); +#145260 = CARTESIAN_POINT('',(3.333358069252,1.718634725344, + 1.060579261811)); +#145261 = CARTESIAN_POINT('',(3.138945897591,1.718634725344, + 0.758228858697)); +#145262 = CARTESIAN_POINT('',(2.944533725929,1.718634725344, + 0.455878455584)); +#145263 = CARTESIAN_POINT('',(2.750121554268,1.718634725344, + 0.15352805247)); +#145264 = CARTESIAN_POINT('',(3.203998822499,1.744185868609, + 1.141494599373)); +#145265 = CARTESIAN_POINT('',(3.017131298476,1.744185868609, + 0.834424953331)); +#145266 = CARTESIAN_POINT('',(2.830263774454,1.744185868609, + 0.527355307289)); +#145267 = CARTESIAN_POINT('',(2.643396250431,1.744185868609, + 0.220285661247)); +#145268 = CARTESIAN_POINT('',(3.108168437478,1.750496584288, + 1.198199868093)); +#145269 = CARTESIAN_POINT('',(2.926890049959,1.750496584288, + 0.887822988263)); +#145270 = CARTESIAN_POINT('',(2.745611662439,1.750496584288, + 0.577446108432)); +#145271 = CARTESIAN_POINT('',(2.56433327492,1.750496584288, + 0.267069228602)); +#145272 = CARTESIAN_POINT('',(3.055917792396,1.749915579772, + 1.228086765989)); +#145273 = CARTESIAN_POINT('',(2.877686830677,1.749915579772, + 0.915966786077)); +#145274 = CARTESIAN_POINT('',(2.699455868957,1.749915579772, + 0.603846806164)); +#145275 = CARTESIAN_POINT('',(2.521224907238,1.749915579772, + 0.291726826251)); +#145276 = CARTESIAN_POINT('',(3.048034376991,1.749736923419, + 1.232572681885)); +#145277 = CARTESIAN_POINT('',(2.870263201433,1.749736923419, + 0.920191068918)); +#145278 = CARTESIAN_POINT('',(2.692492025874,1.749736923419, + 0.607809455952)); +#145279 = CARTESIAN_POINT('',(2.514720850315,1.749736923419, + 0.295427842985)); +#145280 = ADVANCED_FACE('',(#145281),#145287,.T.); +#145281 = FACE_BOUND('',#145282,.T.); +#145282 = EDGE_LOOP('',(#145283,#145284,#145285,#145286)); +#145283 = ORIENTED_EDGE('',*,*,#139157,.T.); +#145284 = ORIENTED_EDGE('',*,*,#139134,.F.); +#145285 = ORIENTED_EDGE('',*,*,#138991,.F.); +#145286 = ORIENTED_EDGE('',*,*,#139291,.F.); +#145287 = PLANE('',#145288); +#145288 = AXIS2_PLACEMENT_3D('',#145289,#145290,#145291); +#145289 = CARTESIAN_POINT('',(-1.875705473106,6.575,-11.2)); +#145290 = DIRECTION('',(-0.,1.,0.)); +#145291 = DIRECTION('',(1.,0.,0.)); +#145292 = ADVANCED_FACE('',(#145293),#145318,.T.); +#145293 = FACE_BOUND('',#145294,.T.); +#145294 = EDGE_LOOP('',(#145295,#145303,#145304,#145312)); +#145295 = ORIENTED_EDGE('',*,*,#145296,.F.); +#145296 = EDGE_CURVE('',#138477,#145297,#145299,.T.); +#145297 = VERTEX_POINT('',#145298); +#145298 = CARTESIAN_POINT('',(3.375,-6.15,-12.8)); +#145299 = LINE('',#145300,#145301); +#145300 = CARTESIAN_POINT('',(3.375,-6.15,-11.2)); +#145301 = VECTOR('',#145302,1.); +#145302 = DIRECTION('',(0.,0.,-1.)); +#145303 = ORIENTED_EDGE('',*,*,#138500,.T.); +#145304 = ORIENTED_EDGE('',*,*,#145305,.T.); +#145305 = EDGE_CURVE('',#138493,#145306,#145308,.T.); +#145306 = VERTEX_POINT('',#145307); +#145307 = CARTESIAN_POINT('',(3.125,-6.15,-12.8)); +#145308 = LINE('',#145309,#145310); +#145309 = CARTESIAN_POINT('',(3.125,-6.15,-11.2)); +#145310 = VECTOR('',#145311,1.); +#145311 = DIRECTION('',(0.,0.,-1.)); +#145312 = ORIENTED_EDGE('',*,*,#145313,.F.); +#145313 = EDGE_CURVE('',#145297,#145306,#145314,.T.); +#145314 = LINE('',#145315,#145316); +#145315 = CARTESIAN_POINT('',(3.375,-6.15,-12.8)); +#145316 = VECTOR('',#145317,1.); +#145317 = DIRECTION('',(-1.,0.,0.)); +#145318 = PLANE('',#145319); +#145319 = AXIS2_PLACEMENT_3D('',#145320,#145321,#145322); +#145320 = CARTESIAN_POINT('',(3.375,-6.15,-11.2)); +#145321 = DIRECTION('',(0.,-1.,0.)); +#145322 = DIRECTION('',(0.,0.,-1.)); +#145323 = ADVANCED_FACE('',(#145324),#145349,.T.); +#145324 = FACE_BOUND('',#145325,.T.); +#145325 = EDGE_LOOP('',(#145326,#145336,#145342,#145343)); +#145326 = ORIENTED_EDGE('',*,*,#145327,.F.); +#145327 = EDGE_CURVE('',#145328,#145330,#145332,.T.); +#145328 = VERTEX_POINT('',#145329); +#145329 = CARTESIAN_POINT('',(3.375,-5.95,-13.2)); +#145330 = VERTEX_POINT('',#145331); +#145331 = CARTESIAN_POINT('',(3.125,-5.95,-13.2)); +#145332 = LINE('',#145333,#145334); +#145333 = CARTESIAN_POINT('',(3.375,-5.95,-13.2)); +#145334 = VECTOR('',#145335,1.); +#145335 = DIRECTION('',(-1.,0.,0.)); +#145336 = ORIENTED_EDGE('',*,*,#145337,.F.); +#145337 = EDGE_CURVE('',#145297,#145328,#145338,.T.); +#145338 = LINE('',#145339,#145340); +#145339 = CARTESIAN_POINT('',(3.375,-6.15,-12.8)); +#145340 = VECTOR('',#145341,1.); +#145341 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145342 = ORIENTED_EDGE('',*,*,#145313,.T.); +#145343 = ORIENTED_EDGE('',*,*,#145344,.F.); +#145344 = EDGE_CURVE('',#145330,#145306,#145345,.T.); +#145345 = LINE('',#145346,#145347); +#145346 = CARTESIAN_POINT('',(3.125,-5.95,-13.2)); +#145347 = VECTOR('',#145348,1.); +#145348 = DIRECTION('',(0.,-0.4472135955,0.894427191)); +#145349 = PLANE('',#145350); +#145350 = AXIS2_PLACEMENT_3D('',#145351,#145352,#145353); +#145351 = CARTESIAN_POINT('',(3.25,-6.05,-13.)); +#145352 = DIRECTION('',(0.,-0.894427191,-0.4472135955)); +#145353 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145354 = ADVANCED_FACE('',(#145355),#145382,.T.); +#145355 = FACE_BOUND('',#145356,.T.); +#145356 = EDGE_LOOP('',(#145357,#145365,#145366,#145367,#145368,#145376) + ); +#145357 = ORIENTED_EDGE('',*,*,#145358,.F.); +#145358 = EDGE_CURVE('',#145330,#145359,#145361,.T.); +#145359 = VERTEX_POINT('',#145360); +#145360 = CARTESIAN_POINT('',(3.125,-5.55,-13.2)); +#145361 = LINE('',#145362,#145363); +#145362 = CARTESIAN_POINT('',(3.125,-5.95,-13.2)); +#145363 = VECTOR('',#145364,1.); +#145364 = DIRECTION('',(0.,1.,0.)); +#145365 = ORIENTED_EDGE('',*,*,#145344,.T.); +#145366 = ORIENTED_EDGE('',*,*,#145305,.F.); +#145367 = ORIENTED_EDGE('',*,*,#138492,.T.); +#145368 = ORIENTED_EDGE('',*,*,#145369,.T.); +#145369 = EDGE_CURVE('',#138485,#145370,#145372,.T.); +#145370 = VERTEX_POINT('',#145371); +#145371 = CARTESIAN_POINT('',(3.125,-5.35,-12.8)); +#145372 = LINE('',#145373,#145374); +#145373 = CARTESIAN_POINT('',(3.125,-5.35,-11.2)); +#145374 = VECTOR('',#145375,1.); +#145375 = DIRECTION('',(0.,0.,-1.)); +#145376 = ORIENTED_EDGE('',*,*,#145377,.T.); +#145377 = EDGE_CURVE('',#145370,#145359,#145378,.T.); +#145378 = LINE('',#145379,#145380); +#145379 = CARTESIAN_POINT('',(3.125,-5.35,-12.8)); +#145380 = VECTOR('',#145381,1.); +#145381 = DIRECTION('',(0.,-0.4472135955,-0.894427191)); +#145382 = PLANE('',#145383); +#145383 = AXIS2_PLACEMENT_3D('',#145384,#145385,#145386); +#145384 = CARTESIAN_POINT('',(3.125,-6.15,-11.2)); +#145385 = DIRECTION('',(-1.,0.,0.)); +#145386 = DIRECTION('',(0.,0.,1.)); +#145387 = ADVANCED_FACE('',(#145388),#145413,.T.); +#145388 = FACE_BOUND('',#145389,.T.); +#145389 = EDGE_LOOP('',(#145390,#145398,#145399,#145407)); +#145390 = ORIENTED_EDGE('',*,*,#145391,.F.); +#145391 = EDGE_CURVE('',#145359,#145392,#145394,.T.); +#145392 = VERTEX_POINT('',#145393); +#145393 = CARTESIAN_POINT('',(3.375,-5.55,-13.2)); +#145394 = LINE('',#145395,#145396); +#145395 = CARTESIAN_POINT('',(3.125,-5.55,-13.2)); +#145396 = VECTOR('',#145397,1.); +#145397 = DIRECTION('',(1.,0.,0.)); +#145398 = ORIENTED_EDGE('',*,*,#145377,.F.); +#145399 = ORIENTED_EDGE('',*,*,#145400,.T.); +#145400 = EDGE_CURVE('',#145370,#145401,#145403,.T.); +#145401 = VERTEX_POINT('',#145402); +#145402 = CARTESIAN_POINT('',(3.375,-5.35,-12.8)); +#145403 = LINE('',#145404,#145405); +#145404 = CARTESIAN_POINT('',(3.125,-5.35,-12.8)); +#145405 = VECTOR('',#145406,1.); +#145406 = DIRECTION('',(1.,0.,0.)); +#145407 = ORIENTED_EDGE('',*,*,#145408,.F.); +#145408 = EDGE_CURVE('',#145392,#145401,#145409,.T.); +#145409 = LINE('',#145410,#145411); +#145410 = CARTESIAN_POINT('',(3.375,-5.55,-13.2)); +#145411 = VECTOR('',#145412,1.); +#145412 = DIRECTION('',(0.,0.4472135955,0.894427191)); +#145413 = PLANE('',#145414); +#145414 = AXIS2_PLACEMENT_3D('',#145415,#145416,#145417); +#145415 = CARTESIAN_POINT('',(3.25,-5.45,-13.)); +#145416 = DIRECTION('',(0.,0.894427191,-0.4472135955)); +#145417 = DIRECTION('',(-1.,0.,0.)); +#145418 = ADVANCED_FACE('',(#145419),#145437,.T.); +#145419 = FACE_BOUND('',#145420,.T.); +#145420 = EDGE_LOOP('',(#145421,#145427,#145428,#145429,#145430,#145436) + ); +#145421 = ORIENTED_EDGE('',*,*,#145422,.F.); +#145422 = EDGE_CURVE('',#138475,#145401,#145423,.T.); +#145423 = LINE('',#145424,#145425); +#145424 = CARTESIAN_POINT('',(3.375,-5.35,-11.2)); +#145425 = VECTOR('',#145426,1.); +#145426 = DIRECTION('',(0.,0.,-1.)); +#145427 = ORIENTED_EDGE('',*,*,#138474,.T.); +#145428 = ORIENTED_EDGE('',*,*,#145296,.T.); +#145429 = ORIENTED_EDGE('',*,*,#145337,.T.); +#145430 = ORIENTED_EDGE('',*,*,#145431,.F.); +#145431 = EDGE_CURVE('',#145392,#145328,#145432,.T.); +#145432 = LINE('',#145433,#145434); +#145433 = CARTESIAN_POINT('',(3.375,-5.55,-13.2)); +#145434 = VECTOR('',#145435,1.); +#145435 = DIRECTION('',(0.,-1.,0.)); +#145436 = ORIENTED_EDGE('',*,*,#145408,.T.); +#145437 = PLANE('',#145438); +#145438 = AXIS2_PLACEMENT_3D('',#145439,#145440,#145441); +#145439 = CARTESIAN_POINT('',(3.375,-5.35,-11.2)); +#145440 = DIRECTION('',(1.,0.,0.)); +#145441 = DIRECTION('',(-0.,1.,0.)); +#145442 = ADVANCED_FACE('',(#145443),#145449,.T.); +#145443 = FACE_BOUND('',#145444,.T.); +#145444 = EDGE_LOOP('',(#145445,#145446,#145447,#145448)); +#145445 = ORIENTED_EDGE('',*,*,#145431,.T.); +#145446 = ORIENTED_EDGE('',*,*,#145327,.T.); +#145447 = ORIENTED_EDGE('',*,*,#145358,.T.); +#145448 = ORIENTED_EDGE('',*,*,#145391,.T.); +#145449 = PLANE('',#145450); +#145450 = AXIS2_PLACEMENT_3D('',#145451,#145452,#145453); +#145451 = CARTESIAN_POINT('',(0.,0.,-13.2)); +#145452 = DIRECTION('',(0.,0.,-1.)); +#145453 = DIRECTION('',(0.,-1.,0.)); +#145454 = ADVANCED_FACE('',(#145455),#145489,.T.); +#145455 = FACE_BOUND('',#145456,.T.); +#145456 = EDGE_LOOP('',(#145457,#145467,#145475,#145483)); +#145457 = ORIENTED_EDGE('',*,*,#145458,.T.); +#145458 = EDGE_CURVE('',#145459,#145461,#145463,.T.); +#145459 = VERTEX_POINT('',#145460); +#145460 = CARTESIAN_POINT('',(3.375,-10.05,-13.2)); +#145461 = VERTEX_POINT('',#145462); +#145462 = CARTESIAN_POINT('',(3.375,-10.45,-13.2)); +#145463 = LINE('',#145464,#145465); +#145464 = CARTESIAN_POINT('',(3.375,-10.05,-13.2)); +#145465 = VECTOR('',#145466,1.); +#145466 = DIRECTION('',(0.,-1.,0.)); +#145467 = ORIENTED_EDGE('',*,*,#145468,.T.); +#145468 = EDGE_CURVE('',#145461,#145469,#145471,.T.); +#145469 = VERTEX_POINT('',#145470); +#145470 = CARTESIAN_POINT('',(3.125,-10.45,-13.2)); +#145471 = LINE('',#145472,#145473); +#145472 = CARTESIAN_POINT('',(3.375,-10.45,-13.2)); +#145473 = VECTOR('',#145474,1.); +#145474 = DIRECTION('',(-1.,0.,0.)); +#145475 = ORIENTED_EDGE('',*,*,#145476,.T.); +#145476 = EDGE_CURVE('',#145469,#145477,#145479,.T.); +#145477 = VERTEX_POINT('',#145478); +#145478 = CARTESIAN_POINT('',(3.125,-10.05,-13.2)); +#145479 = LINE('',#145480,#145481); +#145480 = CARTESIAN_POINT('',(3.125,-10.45,-13.2)); +#145481 = VECTOR('',#145482,1.); +#145482 = DIRECTION('',(0.,1.,0.)); +#145483 = ORIENTED_EDGE('',*,*,#145484,.T.); +#145484 = EDGE_CURVE('',#145477,#145459,#145485,.T.); +#145485 = LINE('',#145486,#145487); +#145486 = CARTESIAN_POINT('',(3.125,-10.05,-13.2)); +#145487 = VECTOR('',#145488,1.); +#145488 = DIRECTION('',(1.,0.,0.)); +#145489 = PLANE('',#145490); +#145490 = AXIS2_PLACEMENT_3D('',#145491,#145492,#145493); +#145491 = CARTESIAN_POINT('',(0.,0.,-13.2)); +#145492 = DIRECTION('',(0.,0.,-1.)); +#145493 = DIRECTION('',(0.,-1.,0.)); +#145494 = ADVANCED_FACE('',(#145495),#145529,.T.); +#145495 = FACE_BOUND('',#145496,.T.); +#145496 = EDGE_LOOP('',(#145497,#145507,#145515,#145523)); +#145497 = ORIENTED_EDGE('',*,*,#145498,.T.); +#145498 = EDGE_CURVE('',#145499,#145501,#145503,.T.); +#145499 = VERTEX_POINT('',#145500); +#145500 = CARTESIAN_POINT('',(-3.125,-5.55,-13.2)); +#145501 = VERTEX_POINT('',#145502); +#145502 = CARTESIAN_POINT('',(-3.125,-5.95,-13.2)); +#145503 = LINE('',#145504,#145505); +#145504 = CARTESIAN_POINT('',(-3.125,-5.55,-13.2)); +#145505 = VECTOR('',#145506,1.); +#145506 = DIRECTION('',(0.,-1.,0.)); +#145507 = ORIENTED_EDGE('',*,*,#145508,.T.); +#145508 = EDGE_CURVE('',#145501,#145509,#145511,.T.); +#145509 = VERTEX_POINT('',#145510); +#145510 = CARTESIAN_POINT('',(-3.375,-5.95,-13.2)); +#145511 = LINE('',#145512,#145513); +#145512 = CARTESIAN_POINT('',(-3.125,-5.95,-13.2)); +#145513 = VECTOR('',#145514,1.); +#145514 = DIRECTION('',(-1.,0.,0.)); +#145515 = ORIENTED_EDGE('',*,*,#145516,.T.); +#145516 = EDGE_CURVE('',#145509,#145517,#145519,.T.); +#145517 = VERTEX_POINT('',#145518); +#145518 = CARTESIAN_POINT('',(-3.375,-5.55,-13.2)); +#145519 = LINE('',#145520,#145521); +#145520 = CARTESIAN_POINT('',(-3.375,-5.95,-13.2)); +#145521 = VECTOR('',#145522,1.); +#145522 = DIRECTION('',(0.,1.,0.)); +#145523 = ORIENTED_EDGE('',*,*,#145524,.T.); +#145524 = EDGE_CURVE('',#145517,#145499,#145525,.T.); +#145525 = LINE('',#145526,#145527); +#145526 = CARTESIAN_POINT('',(-3.375,-5.55,-13.2)); +#145527 = VECTOR('',#145528,1.); +#145528 = DIRECTION('',(1.,0.,0.)); +#145529 = PLANE('',#145530); +#145530 = AXIS2_PLACEMENT_3D('',#145531,#145532,#145533); +#145531 = CARTESIAN_POINT('',(0.,0.,-13.2)); +#145532 = DIRECTION('',(0.,0.,-1.)); +#145533 = DIRECTION('',(0.,-1.,0.)); +#145534 = ADVANCED_FACE('',(#145535),#145569,.T.); +#145535 = FACE_BOUND('',#145536,.T.); +#145536 = EDGE_LOOP('',(#145537,#145547,#145555,#145563)); +#145537 = ORIENTED_EDGE('',*,*,#145538,.T.); +#145538 = EDGE_CURVE('',#145539,#145541,#145543,.T.); +#145539 = VERTEX_POINT('',#145540); +#145540 = CARTESIAN_POINT('',(-3.125,-10.05,-13.2)); +#145541 = VERTEX_POINT('',#145542); +#145542 = CARTESIAN_POINT('',(-3.125,-10.45,-13.2)); +#145543 = LINE('',#145544,#145545); +#145544 = CARTESIAN_POINT('',(-3.125,-10.05,-13.2)); +#145545 = VECTOR('',#145546,1.); +#145546 = DIRECTION('',(0.,-1.,0.)); +#145547 = ORIENTED_EDGE('',*,*,#145548,.T.); +#145548 = EDGE_CURVE('',#145541,#145549,#145551,.T.); +#145549 = VERTEX_POINT('',#145550); +#145550 = CARTESIAN_POINT('',(-3.375,-10.45,-13.2)); +#145551 = LINE('',#145552,#145553); +#145552 = CARTESIAN_POINT('',(-3.125,-10.45,-13.2)); +#145553 = VECTOR('',#145554,1.); +#145554 = DIRECTION('',(-1.,0.,0.)); +#145555 = ORIENTED_EDGE('',*,*,#145556,.T.); +#145556 = EDGE_CURVE('',#145549,#145557,#145559,.T.); +#145557 = VERTEX_POINT('',#145558); +#145558 = CARTESIAN_POINT('',(-3.375,-10.05,-13.2)); +#145559 = LINE('',#145560,#145561); +#145560 = CARTESIAN_POINT('',(-3.375,-10.45,-13.2)); +#145561 = VECTOR('',#145562,1.); +#145562 = DIRECTION('',(0.,1.,0.)); +#145563 = ORIENTED_EDGE('',*,*,#145564,.T.); +#145564 = EDGE_CURVE('',#145557,#145539,#145565,.T.); +#145565 = LINE('',#145566,#145567); +#145566 = CARTESIAN_POINT('',(-3.375,-10.05,-13.2)); +#145567 = VECTOR('',#145568,1.); +#145568 = DIRECTION('',(1.,0.,0.)); +#145569 = PLANE('',#145570); +#145570 = AXIS2_PLACEMENT_3D('',#145571,#145572,#145573); +#145571 = CARTESIAN_POINT('',(0.,0.,-13.2)); +#145572 = DIRECTION('',(0.,0.,-1.)); +#145573 = DIRECTION('',(0.,-1.,0.)); +#145574 = ADVANCED_FACE('',(#145575),#145600,.T.); +#145575 = FACE_BOUND('',#145576,.T.); +#145576 = EDGE_LOOP('',(#145577,#145578,#145586,#145594)); +#145577 = ORIENTED_EDGE('',*,*,#145484,.F.); +#145578 = ORIENTED_EDGE('',*,*,#145579,.F.); +#145579 = EDGE_CURVE('',#145580,#145477,#145582,.T.); +#145580 = VERTEX_POINT('',#145581); +#145581 = CARTESIAN_POINT('',(3.125,-9.85,-12.8)); +#145582 = LINE('',#145583,#145584); +#145583 = CARTESIAN_POINT('',(3.125,-9.85,-12.8)); +#145584 = VECTOR('',#145585,1.); +#145585 = DIRECTION('',(0.,-0.4472135955,-0.894427191)); +#145586 = ORIENTED_EDGE('',*,*,#145587,.T.); +#145587 = EDGE_CURVE('',#145580,#145588,#145590,.T.); +#145588 = VERTEX_POINT('',#145589); +#145589 = CARTESIAN_POINT('',(3.375,-9.85,-12.8)); +#145590 = LINE('',#145591,#145592); +#145591 = CARTESIAN_POINT('',(3.125,-9.85,-12.8)); +#145592 = VECTOR('',#145593,1.); +#145593 = DIRECTION('',(1.,0.,0.)); +#145594 = ORIENTED_EDGE('',*,*,#145595,.F.); +#145595 = EDGE_CURVE('',#145459,#145588,#145596,.T.); +#145596 = LINE('',#145597,#145598); +#145597 = CARTESIAN_POINT('',(3.375,-10.05,-13.2)); +#145598 = VECTOR('',#145599,1.); +#145599 = DIRECTION('',(0.,0.4472135955,0.894427191)); +#145600 = PLANE('',#145601); +#145601 = AXIS2_PLACEMENT_3D('',#145602,#145603,#145604); +#145602 = CARTESIAN_POINT('',(3.25,-9.95,-13.)); +#145603 = DIRECTION('',(0.,0.894427191,-0.4472135955)); +#145604 = DIRECTION('',(-1.,0.,0.)); +#145605 = ADVANCED_FACE('',(#145606),#145631,.T.); +#145606 = FACE_BOUND('',#145607,.T.); +#145607 = EDGE_LOOP('',(#145608,#145614,#145615,#145623,#145629,#145630) + ); +#145608 = ORIENTED_EDGE('',*,*,#145609,.F.); +#145609 = EDGE_CURVE('',#138511,#145588,#145610,.T.); +#145610 = LINE('',#145611,#145612); +#145611 = CARTESIAN_POINT('',(3.375,-9.85,-11.2)); +#145612 = VECTOR('',#145613,1.); +#145613 = DIRECTION('',(0.,0.,-1.)); +#145614 = ORIENTED_EDGE('',*,*,#138534,.T.); +#145615 = ORIENTED_EDGE('',*,*,#145616,.T.); +#145616 = EDGE_CURVE('',#138527,#145617,#145619,.T.); +#145617 = VERTEX_POINT('',#145618); +#145618 = CARTESIAN_POINT('',(3.375,-10.65,-12.8)); +#145619 = LINE('',#145620,#145621); +#145620 = CARTESIAN_POINT('',(3.375,-10.65,-11.2)); +#145621 = VECTOR('',#145622,1.); +#145622 = DIRECTION('',(0.,0.,-1.)); +#145623 = ORIENTED_EDGE('',*,*,#145624,.T.); +#145624 = EDGE_CURVE('',#145617,#145461,#145625,.T.); +#145625 = LINE('',#145626,#145627); +#145626 = CARTESIAN_POINT('',(3.375,-10.65,-12.8)); +#145627 = VECTOR('',#145628,1.); +#145628 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145629 = ORIENTED_EDGE('',*,*,#145458,.F.); +#145630 = ORIENTED_EDGE('',*,*,#145595,.T.); +#145631 = PLANE('',#145632); +#145632 = AXIS2_PLACEMENT_3D('',#145633,#145634,#145635); +#145633 = CARTESIAN_POINT('',(3.375,-9.85,-11.2)); +#145634 = DIRECTION('',(1.,0.,0.)); +#145635 = DIRECTION('',(-0.,1.,0.)); +#145636 = ADVANCED_FACE('',(#145637),#145655,.T.); +#145637 = FACE_BOUND('',#145638,.T.); +#145638 = EDGE_LOOP('',(#145639,#145640,#145641,#145649)); +#145639 = ORIENTED_EDGE('',*,*,#145468,.F.); +#145640 = ORIENTED_EDGE('',*,*,#145624,.F.); +#145641 = ORIENTED_EDGE('',*,*,#145642,.T.); +#145642 = EDGE_CURVE('',#145617,#145643,#145645,.T.); +#145643 = VERTEX_POINT('',#145644); +#145644 = CARTESIAN_POINT('',(3.125,-10.65,-12.8)); +#145645 = LINE('',#145646,#145647); +#145646 = CARTESIAN_POINT('',(3.375,-10.65,-12.8)); +#145647 = VECTOR('',#145648,1.); +#145648 = DIRECTION('',(-1.,0.,0.)); +#145649 = ORIENTED_EDGE('',*,*,#145650,.F.); +#145650 = EDGE_CURVE('',#145469,#145643,#145651,.T.); +#145651 = LINE('',#145652,#145653); +#145652 = CARTESIAN_POINT('',(3.125,-10.45,-13.2)); +#145653 = VECTOR('',#145654,1.); +#145654 = DIRECTION('',(0.,-0.4472135955,0.894427191)); +#145655 = PLANE('',#145656); +#145656 = AXIS2_PLACEMENT_3D('',#145657,#145658,#145659); +#145657 = CARTESIAN_POINT('',(3.25,-10.55,-13.)); +#145658 = DIRECTION('',(0.,-0.894427191,-0.4472135955)); +#145659 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145660 = ADVANCED_FACE('',(#145661),#145679,.T.); +#145661 = FACE_BOUND('',#145662,.T.); +#145662 = EDGE_LOOP('',(#145663,#145664,#145665,#145671,#145672,#145678) + ); +#145663 = ORIENTED_EDGE('',*,*,#145476,.F.); +#145664 = ORIENTED_EDGE('',*,*,#145650,.T.); +#145665 = ORIENTED_EDGE('',*,*,#145666,.F.); +#145666 = EDGE_CURVE('',#138519,#145643,#145667,.T.); +#145667 = LINE('',#145668,#145669); +#145668 = CARTESIAN_POINT('',(3.125,-10.65,-11.2)); +#145669 = VECTOR('',#145670,1.); +#145670 = DIRECTION('',(0.,0.,-1.)); +#145671 = ORIENTED_EDGE('',*,*,#138518,.T.); +#145672 = ORIENTED_EDGE('',*,*,#145673,.T.); +#145673 = EDGE_CURVE('',#138509,#145580,#145674,.T.); +#145674 = LINE('',#145675,#145676); +#145675 = CARTESIAN_POINT('',(3.125,-9.85,-11.2)); +#145676 = VECTOR('',#145677,1.); +#145677 = DIRECTION('',(0.,0.,-1.)); +#145678 = ORIENTED_EDGE('',*,*,#145579,.T.); +#145679 = PLANE('',#145680); +#145680 = AXIS2_PLACEMENT_3D('',#145681,#145682,#145683); +#145681 = CARTESIAN_POINT('',(3.125,-10.65,-11.2)); +#145682 = DIRECTION('',(-1.,0.,0.)); +#145683 = DIRECTION('',(0.,0.,1.)); +#145684 = ADVANCED_FACE('',(#145685),#145691,.T.); +#145685 = FACE_BOUND('',#145686,.T.); +#145686 = EDGE_LOOP('',(#145687,#145688,#145689,#145690)); +#145687 = ORIENTED_EDGE('',*,*,#145673,.F.); +#145688 = ORIENTED_EDGE('',*,*,#138508,.T.); +#145689 = ORIENTED_EDGE('',*,*,#145609,.T.); +#145690 = ORIENTED_EDGE('',*,*,#145587,.F.); +#145691 = PLANE('',#145692); +#145692 = AXIS2_PLACEMENT_3D('',#145693,#145694,#145695); +#145693 = CARTESIAN_POINT('',(3.125,-9.85,-11.2)); +#145694 = DIRECTION('',(-0.,1.,0.)); +#145695 = DIRECTION('',(1.,0.,0.)); +#145696 = ADVANCED_FACE('',(#145697),#145703,.T.); +#145697 = FACE_BOUND('',#145698,.T.); +#145698 = EDGE_LOOP('',(#145699,#145700,#145701,#145702)); +#145699 = ORIENTED_EDGE('',*,*,#145616,.F.); +#145700 = ORIENTED_EDGE('',*,*,#138526,.T.); +#145701 = ORIENTED_EDGE('',*,*,#145666,.T.); +#145702 = ORIENTED_EDGE('',*,*,#145642,.F.); +#145703 = PLANE('',#145704); +#145704 = AXIS2_PLACEMENT_3D('',#145705,#145706,#145707); +#145705 = CARTESIAN_POINT('',(3.375,-10.65,-11.2)); +#145706 = DIRECTION('',(0.,-1.,0.)); +#145707 = DIRECTION('',(0.,0.,-1.)); +#145708 = ADVANCED_FACE('',(#145709),#145734,.T.); +#145709 = FACE_BOUND('',#145710,.T.); +#145710 = EDGE_LOOP('',(#145711,#145712,#145720,#145728)); +#145711 = ORIENTED_EDGE('',*,*,#145524,.F.); +#145712 = ORIENTED_EDGE('',*,*,#145713,.F.); +#145713 = EDGE_CURVE('',#145714,#145517,#145716,.T.); +#145714 = VERTEX_POINT('',#145715); +#145715 = CARTESIAN_POINT('',(-3.375,-5.35,-12.8)); +#145716 = LINE('',#145717,#145718); +#145717 = CARTESIAN_POINT('',(-3.375,-5.35,-12.8)); +#145718 = VECTOR('',#145719,1.); +#145719 = DIRECTION('',(0.,-0.4472135955,-0.894427191)); +#145720 = ORIENTED_EDGE('',*,*,#145721,.T.); +#145721 = EDGE_CURVE('',#145714,#145722,#145724,.T.); +#145722 = VERTEX_POINT('',#145723); +#145723 = CARTESIAN_POINT('',(-3.125,-5.35,-12.8)); +#145724 = LINE('',#145725,#145726); +#145725 = CARTESIAN_POINT('',(-3.375,-5.35,-12.8)); +#145726 = VECTOR('',#145727,1.); +#145727 = DIRECTION('',(1.,0.,0.)); +#145728 = ORIENTED_EDGE('',*,*,#145729,.F.); +#145729 = EDGE_CURVE('',#145499,#145722,#145730,.T.); +#145730 = LINE('',#145731,#145732); +#145731 = CARTESIAN_POINT('',(-3.125,-5.55,-13.2)); +#145732 = VECTOR('',#145733,1.); +#145733 = DIRECTION('',(0.,0.4472135955,0.894427191)); +#145734 = PLANE('',#145735); +#145735 = AXIS2_PLACEMENT_3D('',#145736,#145737,#145738); +#145736 = CARTESIAN_POINT('',(-3.25,-5.45,-13.)); +#145737 = DIRECTION('',(0.,0.894427191,-0.4472135955)); +#145738 = DIRECTION('',(-1.,0.,0.)); +#145739 = ADVANCED_FACE('',(#145740),#145765,.T.); +#145740 = FACE_BOUND('',#145741,.T.); +#145741 = EDGE_LOOP('',(#145742,#145748,#145749,#145757,#145763,#145764) + ); +#145742 = ORIENTED_EDGE('',*,*,#145743,.F.); +#145743 = EDGE_CURVE('',#138553,#145722,#145744,.T.); +#145744 = LINE('',#145745,#145746); +#145745 = CARTESIAN_POINT('',(-3.125,-5.35,-11.2)); +#145746 = VECTOR('',#145747,1.); +#145747 = DIRECTION('',(0.,0.,-1.)); +#145748 = ORIENTED_EDGE('',*,*,#138552,.T.); +#145749 = ORIENTED_EDGE('',*,*,#145750,.T.); +#145750 = EDGE_CURVE('',#138543,#145751,#145753,.T.); +#145751 = VERTEX_POINT('',#145752); +#145752 = CARTESIAN_POINT('',(-3.125,-6.15,-12.8)); +#145753 = LINE('',#145754,#145755); +#145754 = CARTESIAN_POINT('',(-3.125,-6.15,-11.2)); +#145755 = VECTOR('',#145756,1.); +#145756 = DIRECTION('',(0.,0.,-1.)); +#145757 = ORIENTED_EDGE('',*,*,#145758,.T.); +#145758 = EDGE_CURVE('',#145751,#145501,#145759,.T.); +#145759 = LINE('',#145760,#145761); +#145760 = CARTESIAN_POINT('',(-3.125,-6.15,-12.8)); +#145761 = VECTOR('',#145762,1.); +#145762 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145763 = ORIENTED_EDGE('',*,*,#145498,.F.); +#145764 = ORIENTED_EDGE('',*,*,#145729,.T.); +#145765 = PLANE('',#145766); +#145766 = AXIS2_PLACEMENT_3D('',#145767,#145768,#145769); +#145767 = CARTESIAN_POINT('',(-3.125,-5.35,-11.2)); +#145768 = DIRECTION('',(1.,0.,0.)); +#145769 = DIRECTION('',(-0.,1.,0.)); +#145770 = ADVANCED_FACE('',(#145771),#145789,.T.); +#145771 = FACE_BOUND('',#145772,.T.); +#145772 = EDGE_LOOP('',(#145773,#145774,#145775,#145783)); +#145773 = ORIENTED_EDGE('',*,*,#145508,.F.); +#145774 = ORIENTED_EDGE('',*,*,#145758,.F.); +#145775 = ORIENTED_EDGE('',*,*,#145776,.T.); +#145776 = EDGE_CURVE('',#145751,#145777,#145779,.T.); +#145777 = VERTEX_POINT('',#145778); +#145778 = CARTESIAN_POINT('',(-3.375,-6.15,-12.8)); +#145779 = LINE('',#145780,#145781); +#145780 = CARTESIAN_POINT('',(-3.125,-6.15,-12.8)); +#145781 = VECTOR('',#145782,1.); +#145782 = DIRECTION('',(-1.,0.,0.)); +#145783 = ORIENTED_EDGE('',*,*,#145784,.F.); +#145784 = EDGE_CURVE('',#145509,#145777,#145785,.T.); +#145785 = LINE('',#145786,#145787); +#145786 = CARTESIAN_POINT('',(-3.375,-5.95,-13.2)); +#145787 = VECTOR('',#145788,1.); +#145788 = DIRECTION('',(0.,-0.4472135955,0.894427191)); +#145789 = PLANE('',#145790); +#145790 = AXIS2_PLACEMENT_3D('',#145791,#145792,#145793); +#145791 = CARTESIAN_POINT('',(-3.25,-6.05,-13.)); +#145792 = DIRECTION('',(0.,-0.894427191,-0.4472135955)); +#145793 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145794 = ADVANCED_FACE('',(#145795),#145813,.T.); +#145795 = FACE_BOUND('',#145796,.T.); +#145796 = EDGE_LOOP('',(#145797,#145798,#145799,#145805,#145806,#145812) + ); +#145797 = ORIENTED_EDGE('',*,*,#145516,.F.); +#145798 = ORIENTED_EDGE('',*,*,#145784,.T.); +#145799 = ORIENTED_EDGE('',*,*,#145800,.F.); +#145800 = EDGE_CURVE('',#138545,#145777,#145801,.T.); +#145801 = LINE('',#145802,#145803); +#145802 = CARTESIAN_POINT('',(-3.375,-6.15,-11.2)); +#145803 = VECTOR('',#145804,1.); +#145804 = DIRECTION('',(0.,0.,-1.)); +#145805 = ORIENTED_EDGE('',*,*,#138568,.T.); +#145806 = ORIENTED_EDGE('',*,*,#145807,.T.); +#145807 = EDGE_CURVE('',#138561,#145714,#145808,.T.); +#145808 = LINE('',#145809,#145810); +#145809 = CARTESIAN_POINT('',(-3.375,-5.35,-11.2)); +#145810 = VECTOR('',#145811,1.); +#145811 = DIRECTION('',(0.,0.,-1.)); +#145812 = ORIENTED_EDGE('',*,*,#145713,.T.); +#145813 = PLANE('',#145814); +#145814 = AXIS2_PLACEMENT_3D('',#145815,#145816,#145817); +#145815 = CARTESIAN_POINT('',(-3.375,-6.15,-11.2)); +#145816 = DIRECTION('',(-1.,0.,0.)); +#145817 = DIRECTION('',(0.,0.,1.)); +#145818 = ADVANCED_FACE('',(#145819),#145825,.T.); +#145819 = FACE_BOUND('',#145820,.T.); +#145820 = EDGE_LOOP('',(#145821,#145822,#145823,#145824)); +#145821 = ORIENTED_EDGE('',*,*,#145807,.F.); +#145822 = ORIENTED_EDGE('',*,*,#138560,.T.); +#145823 = ORIENTED_EDGE('',*,*,#145743,.T.); +#145824 = ORIENTED_EDGE('',*,*,#145721,.F.); +#145825 = PLANE('',#145826); +#145826 = AXIS2_PLACEMENT_3D('',#145827,#145828,#145829); +#145827 = CARTESIAN_POINT('',(-3.375,-5.35,-11.2)); +#145828 = DIRECTION('',(-0.,1.,0.)); +#145829 = DIRECTION('',(1.,0.,0.)); +#145830 = ADVANCED_FACE('',(#145831),#145837,.T.); +#145831 = FACE_BOUND('',#145832,.T.); +#145832 = EDGE_LOOP('',(#145833,#145834,#145835,#145836)); +#145833 = ORIENTED_EDGE('',*,*,#145750,.F.); +#145834 = ORIENTED_EDGE('',*,*,#138542,.T.); +#145835 = ORIENTED_EDGE('',*,*,#145800,.T.); +#145836 = ORIENTED_EDGE('',*,*,#145776,.F.); +#145837 = PLANE('',#145838); +#145838 = AXIS2_PLACEMENT_3D('',#145839,#145840,#145841); +#145839 = CARTESIAN_POINT('',(-3.125,-6.15,-11.2)); +#145840 = DIRECTION('',(0.,-1.,0.)); +#145841 = DIRECTION('',(0.,0.,-1.)); +#145842 = ADVANCED_FACE('',(#145843),#145868,.T.); +#145843 = FACE_BOUND('',#145844,.T.); +#145844 = EDGE_LOOP('',(#145845,#145846,#145854,#145862)); +#145845 = ORIENTED_EDGE('',*,*,#145564,.F.); +#145846 = ORIENTED_EDGE('',*,*,#145847,.F.); +#145847 = EDGE_CURVE('',#145848,#145557,#145850,.T.); +#145848 = VERTEX_POINT('',#145849); +#145849 = CARTESIAN_POINT('',(-3.375,-9.85,-12.8)); +#145850 = LINE('',#145851,#145852); +#145851 = CARTESIAN_POINT('',(-3.375,-9.85,-12.8)); +#145852 = VECTOR('',#145853,1.); +#145853 = DIRECTION('',(0.,-0.4472135955,-0.894427191)); +#145854 = ORIENTED_EDGE('',*,*,#145855,.T.); +#145855 = EDGE_CURVE('',#145848,#145856,#145858,.T.); +#145856 = VERTEX_POINT('',#145857); +#145857 = CARTESIAN_POINT('',(-3.125,-9.85,-12.8)); +#145858 = LINE('',#145859,#145860); +#145859 = CARTESIAN_POINT('',(-3.375,-9.85,-12.8)); +#145860 = VECTOR('',#145861,1.); +#145861 = DIRECTION('',(1.,0.,0.)); +#145862 = ORIENTED_EDGE('',*,*,#145863,.F.); +#145863 = EDGE_CURVE('',#145539,#145856,#145864,.T.); +#145864 = LINE('',#145865,#145866); +#145865 = CARTESIAN_POINT('',(-3.125,-10.05,-13.2)); +#145866 = VECTOR('',#145867,1.); +#145867 = DIRECTION('',(0.,0.4472135955,0.894427191)); +#145868 = PLANE('',#145869); +#145869 = AXIS2_PLACEMENT_3D('',#145870,#145871,#145872); +#145870 = CARTESIAN_POINT('',(-3.25,-9.95,-13.)); +#145871 = DIRECTION('',(0.,0.894427191,-0.4472135955)); +#145872 = DIRECTION('',(-1.,0.,0.)); +#145873 = ADVANCED_FACE('',(#145874),#145899,.T.); +#145874 = FACE_BOUND('',#145875,.T.); +#145875 = EDGE_LOOP('',(#145876,#145882,#145883,#145891,#145897,#145898) + ); +#145876 = ORIENTED_EDGE('',*,*,#145877,.F.); +#145877 = EDGE_CURVE('',#138595,#145856,#145878,.T.); +#145878 = LINE('',#145879,#145880); +#145879 = CARTESIAN_POINT('',(-3.125,-9.85,-11.2)); +#145880 = VECTOR('',#145881,1.); +#145881 = DIRECTION('',(0.,0.,-1.)); +#145882 = ORIENTED_EDGE('',*,*,#138594,.T.); +#145883 = ORIENTED_EDGE('',*,*,#145884,.T.); +#145884 = EDGE_CURVE('',#138587,#145885,#145887,.T.); +#145885 = VERTEX_POINT('',#145886); +#145886 = CARTESIAN_POINT('',(-3.125,-10.65,-12.8)); +#145887 = LINE('',#145888,#145889); +#145888 = CARTESIAN_POINT('',(-3.125,-10.65,-11.2)); +#145889 = VECTOR('',#145890,1.); +#145890 = DIRECTION('',(0.,0.,-1.)); +#145891 = ORIENTED_EDGE('',*,*,#145892,.T.); +#145892 = EDGE_CURVE('',#145885,#145541,#145893,.T.); +#145893 = LINE('',#145894,#145895); +#145894 = CARTESIAN_POINT('',(-3.125,-10.65,-12.8)); +#145895 = VECTOR('',#145896,1.); +#145896 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145897 = ORIENTED_EDGE('',*,*,#145538,.F.); +#145898 = ORIENTED_EDGE('',*,*,#145863,.T.); +#145899 = PLANE('',#145900); +#145900 = AXIS2_PLACEMENT_3D('',#145901,#145902,#145903); +#145901 = CARTESIAN_POINT('',(-3.125,-9.85,-11.2)); +#145902 = DIRECTION('',(1.,0.,0.)); +#145903 = DIRECTION('',(-0.,1.,0.)); +#145904 = ADVANCED_FACE('',(#145905),#145923,.T.); +#145905 = FACE_BOUND('',#145906,.T.); +#145906 = EDGE_LOOP('',(#145907,#145908,#145909,#145917)); +#145907 = ORIENTED_EDGE('',*,*,#145548,.F.); +#145908 = ORIENTED_EDGE('',*,*,#145892,.F.); +#145909 = ORIENTED_EDGE('',*,*,#145910,.T.); +#145910 = EDGE_CURVE('',#145885,#145911,#145913,.T.); +#145911 = VERTEX_POINT('',#145912); +#145912 = CARTESIAN_POINT('',(-3.375,-10.65,-12.8)); +#145913 = LINE('',#145914,#145915); +#145914 = CARTESIAN_POINT('',(-3.125,-10.65,-12.8)); +#145915 = VECTOR('',#145916,1.); +#145916 = DIRECTION('',(-1.,0.,0.)); +#145917 = ORIENTED_EDGE('',*,*,#145918,.F.); +#145918 = EDGE_CURVE('',#145549,#145911,#145919,.T.); +#145919 = LINE('',#145920,#145921); +#145920 = CARTESIAN_POINT('',(-3.375,-10.45,-13.2)); +#145921 = VECTOR('',#145922,1.); +#145922 = DIRECTION('',(0.,-0.4472135955,0.894427191)); +#145923 = PLANE('',#145924); +#145924 = AXIS2_PLACEMENT_3D('',#145925,#145926,#145927); +#145925 = CARTESIAN_POINT('',(-3.25,-10.55,-13.)); +#145926 = DIRECTION('',(0.,-0.894427191,-0.4472135955)); +#145927 = DIRECTION('',(0.,0.4472135955,-0.894427191)); +#145928 = ADVANCED_FACE('',(#145929),#145947,.T.); +#145929 = FACE_BOUND('',#145930,.T.); +#145930 = EDGE_LOOP('',(#145931,#145932,#145933,#145939,#145940,#145946) + ); +#145931 = ORIENTED_EDGE('',*,*,#145556,.F.); +#145932 = ORIENTED_EDGE('',*,*,#145918,.T.); +#145933 = ORIENTED_EDGE('',*,*,#145934,.F.); +#145934 = EDGE_CURVE('',#138577,#145911,#145935,.T.); +#145935 = LINE('',#145936,#145937); +#145936 = CARTESIAN_POINT('',(-3.375,-10.65,-11.2)); +#145937 = VECTOR('',#145938,1.); +#145938 = DIRECTION('',(0.,0.,-1.)); +#145939 = ORIENTED_EDGE('',*,*,#138576,.T.); +#145940 = ORIENTED_EDGE('',*,*,#145941,.T.); +#145941 = EDGE_CURVE('',#138579,#145848,#145942,.T.); +#145942 = LINE('',#145943,#145944); +#145943 = CARTESIAN_POINT('',(-3.375,-9.85,-11.2)); +#145944 = VECTOR('',#145945,1.); +#145945 = DIRECTION('',(0.,0.,-1.)); +#145946 = ORIENTED_EDGE('',*,*,#145847,.T.); +#145947 = PLANE('',#145948); +#145948 = AXIS2_PLACEMENT_3D('',#145949,#145950,#145951); +#145949 = CARTESIAN_POINT('',(-3.375,-10.65,-11.2)); +#145950 = DIRECTION('',(-1.,0.,0.)); +#145951 = DIRECTION('',(0.,0.,1.)); +#145952 = ADVANCED_FACE('',(#145953),#145959,.T.); +#145953 = FACE_BOUND('',#145954,.T.); +#145954 = EDGE_LOOP('',(#145955,#145956,#145957,#145958)); +#145955 = ORIENTED_EDGE('',*,*,#145941,.F.); +#145956 = ORIENTED_EDGE('',*,*,#138602,.T.); +#145957 = ORIENTED_EDGE('',*,*,#145877,.T.); +#145958 = ORIENTED_EDGE('',*,*,#145855,.F.); +#145959 = PLANE('',#145960); +#145960 = AXIS2_PLACEMENT_3D('',#145961,#145962,#145963); +#145961 = CARTESIAN_POINT('',(-3.375,-9.85,-11.2)); +#145962 = DIRECTION('',(-0.,1.,0.)); +#145963 = DIRECTION('',(1.,0.,0.)); +#145964 = ADVANCED_FACE('',(#145965),#145971,.T.); +#145965 = FACE_BOUND('',#145966,.T.); +#145966 = EDGE_LOOP('',(#145967,#145968,#145969,#145970)); +#145967 = ORIENTED_EDGE('',*,*,#145884,.F.); +#145968 = ORIENTED_EDGE('',*,*,#138586,.T.); +#145969 = ORIENTED_EDGE('',*,*,#145934,.T.); +#145970 = ORIENTED_EDGE('',*,*,#145910,.F.); +#145971 = PLANE('',#145972); +#145972 = AXIS2_PLACEMENT_3D('',#145973,#145974,#145975); +#145973 = CARTESIAN_POINT('',(-3.125,-10.65,-11.2)); +#145974 = DIRECTION('',(0.,-1.,0.)); +#145975 = DIRECTION('',(0.,0.,-1.)); +#145976 = ADVANCED_FACE('',(#145977),#145983,.T.); +#145977 = FACE_BOUND('',#145978,.T.); +#145978 = EDGE_LOOP('',(#145979,#145980,#145981,#145982)); +#145979 = ORIENTED_EDGE('',*,*,#145369,.F.); +#145980 = ORIENTED_EDGE('',*,*,#138484,.T.); +#145981 = ORIENTED_EDGE('',*,*,#145422,.T.); +#145982 = ORIENTED_EDGE('',*,*,#145400,.F.); +#145983 = PLANE('',#145984); +#145984 = AXIS2_PLACEMENT_3D('',#145985,#145986,#145987); +#145985 = CARTESIAN_POINT('',(3.125,-5.35,-11.2)); +#145986 = DIRECTION('',(-0.,1.,0.)); +#145987 = DIRECTION('',(1.,0.,0.)); +#145988 = ADVANCED_FACE('',(#145989),#146000,.T.); +#145989 = FACE_BOUND('',#145990,.T.); +#145990 = EDGE_LOOP('',(#145991,#145997,#145998,#145999)); +#145991 = ORIENTED_EDGE('',*,*,#145992,.T.); +#145992 = EDGE_CURVE('',#137399,#136502,#145993,.T.); +#145993 = LINE('',#145994,#145995); +#145994 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.2)); +#145995 = VECTOR('',#145996,1.); +#145996 = DIRECTION('',(0.,0.,-1.)); +#145997 = ORIENTED_EDGE('',*,*,#136499,.F.); +#145998 = ORIENTED_EDGE('',*,*,#137303,.F.); +#145999 = ORIENTED_EDGE('',*,*,#137406,.T.); +#146000 = PLANE('',#146001); +#146001 = AXIS2_PLACEMENT_3D('',#146002,#146003,#146004); +#146002 = CARTESIAN_POINT('',(0.901911825898,-2.5,-11.2)); +#146003 = DIRECTION('',(0.,-1.,0.)); +#146004 = DIRECTION('',(0.,0.,-1.)); +#146005 = ADVANCED_FACE('',(#146006),#146017,.T.); +#146006 = FACE_BOUND('',#146007,.T.); +#146007 = EDGE_LOOP('',(#146008,#146014,#146015,#146016)); +#146008 = ORIENTED_EDGE('',*,*,#146009,.T.); +#146009 = EDGE_CURVE('',#137391,#136510,#146010,.T.); +#146010 = LINE('',#146011,#146012); +#146011 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.2)); +#146012 = VECTOR('',#146013,1.); +#146013 = DIRECTION('',(0.,0.,-1.)); +#146014 = ORIENTED_EDGE('',*,*,#136509,.F.); +#146015 = ORIENTED_EDGE('',*,*,#145992,.F.); +#146016 = ORIENTED_EDGE('',*,*,#137398,.T.); +#146017 = PLANE('',#146018); +#146018 = AXIS2_PLACEMENT_3D('',#146019,#146020,#146021); +#146019 = CARTESIAN_POINT('',(0.601911825898,-2.5,-11.2)); +#146020 = DIRECTION('',(-1.,0.,0.)); +#146021 = DIRECTION('',(0.,0.,1.)); +#146022 = ADVANCED_FACE('',(#146023),#146034,.T.); +#146023 = FACE_BOUND('',#146024,.T.); +#146024 = EDGE_LOOP('',(#146025,#146031,#146032,#146033)); +#146025 = ORIENTED_EDGE('',*,*,#146026,.T.); +#146026 = EDGE_CURVE('',#137383,#136518,#146027,.T.); +#146027 = LINE('',#146028,#146029); +#146028 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.2)); +#146029 = VECTOR('',#146030,1.); +#146030 = DIRECTION('',(0.,0.,-1.)); +#146031 = ORIENTED_EDGE('',*,*,#136517,.F.); +#146032 = ORIENTED_EDGE('',*,*,#146009,.F.); +#146033 = ORIENTED_EDGE('',*,*,#137390,.T.); +#146034 = PLANE('',#146035); +#146035 = AXIS2_PLACEMENT_3D('',#146036,#146037,#146038); +#146036 = CARTESIAN_POINT('',(0.601911825898,-2.44893617034,-11.2)); +#146037 = DIRECTION('',(-0.,1.,0.)); +#146038 = DIRECTION('',(1.,0.,0.)); +#146039 = ADVANCED_FACE('',(#146040),#146051,.T.); +#146040 = FACE_BOUND('',#146041,.T.); +#146041 = EDGE_LOOP('',(#146042,#146048,#146049,#146050)); +#146042 = ORIENTED_EDGE('',*,*,#146043,.T.); +#146043 = EDGE_CURVE('',#137375,#136526,#146044,.T.); +#146044 = LINE('',#146045,#146046); +#146045 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.2)); +#146046 = VECTOR('',#146047,1.); +#146047 = DIRECTION('',(0.,0.,-1.)); +#146048 = ORIENTED_EDGE('',*,*,#136525,.F.); +#146049 = ORIENTED_EDGE('',*,*,#146026,.F.); +#146050 = ORIENTED_EDGE('',*,*,#137382,.T.); +#146051 = PLANE('',#146052); +#146052 = AXIS2_PLACEMENT_3D('',#146053,#146054,#146055); +#146053 = CARTESIAN_POINT('',(0.851911825898,-2.44893617034,-11.2)); +#146054 = DIRECTION('',(-1.,0.,0.)); +#146055 = DIRECTION('',(0.,0.,1.)); +#146056 = ADVANCED_FACE('',(#146057),#146063,.T.); +#146057 = FACE_BOUND('',#146058,.T.); +#146058 = EDGE_LOOP('',(#146059,#146060,#146061,#146062)); +#146059 = ORIENTED_EDGE('',*,*,#137312,.T.); +#146060 = ORIENTED_EDGE('',*,*,#136533,.F.); +#146061 = ORIENTED_EDGE('',*,*,#146043,.F.); +#146062 = ORIENTED_EDGE('',*,*,#137374,.T.); +#146063 = PLANE('',#146064); +#146064 = AXIS2_PLACEMENT_3D('',#146065,#146066,#146067); +#146065 = CARTESIAN_POINT('',(0.851911825898,-2.1,-11.2)); +#146066 = DIRECTION('',(-0.,1.,0.)); +#146067 = DIRECTION('',(1.,0.,0.)); +#146068 = ADVANCED_FACE('',(#146069),#146085,.T.); +#146069 = FACE_BOUND('',#146070,.T.); +#146070 = EDGE_LOOP('',(#146071,#146077,#146078,#146084)); +#146071 = ORIENTED_EDGE('',*,*,#146072,.T.); +#146072 = EDGE_CURVE('',#137722,#136556,#146073,.T.); +#146073 = LINE('',#146074,#146075); +#146074 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.2)); +#146075 = VECTOR('',#146076,1.); +#146076 = DIRECTION('',(0.,0.,-1.)); +#146077 = ORIENTED_EDGE('',*,*,#136869,.F.); +#146078 = ORIENTED_EDGE('',*,*,#146079,.F.); +#146079 = EDGE_CURVE('',#137418,#136862,#146080,.T.); +#146080 = LINE('',#146081,#146082); +#146081 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.2)); +#146082 = VECTOR('',#146083,1.); +#146083 = DIRECTION('',(0.,0.,-1.)); +#146084 = ORIENTED_EDGE('',*,*,#137729,.T.); +#146085 = PLANE('',#146086); +#146086 = AXIS2_PLACEMENT_3D('',#146087,#146088,#146089); +#146087 = CARTESIAN_POINT('',(0.210245175126,-2.397872340679,-11.2)); +#146088 = DIRECTION('',(-0.,1.,0.)); +#146089 = DIRECTION('',(1.,0.,0.)); +#146090 = ADVANCED_FACE('',(#146091),#146102,.T.); +#146091 = FACE_BOUND('',#146092,.T.); +#146092 = EDGE_LOOP('',(#146093,#146094,#146095,#146101)); +#146093 = ORIENTED_EDGE('',*,*,#146079,.T.); +#146094 = ORIENTED_EDGE('',*,*,#136861,.F.); +#146095 = ORIENTED_EDGE('',*,*,#146096,.F.); +#146096 = EDGE_CURVE('',#137416,#136854,#146097,.T.); +#146097 = LINE('',#146098,#146099); +#146098 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.2)); +#146099 = VECTOR('',#146100,1.); +#146100 = DIRECTION('',(0.,0.,-1.)); +#146101 = ORIENTED_EDGE('',*,*,#137415,.T.); +#146102 = PLANE('',#146103); +#146103 = AXIS2_PLACEMENT_3D('',#146104,#146105,#146106); +#146104 = CARTESIAN_POINT('',(0.21857847667,-2.440425533056,-11.2)); +#146105 = DIRECTION('',(-0.981359277837,-0.192182121448,0.)); +#146106 = DIRECTION('',(-0.192182121448,0.981359277837,0.)); +#146107 = ADVANCED_FACE('',(#146108),#146119,.T.); +#146108 = FACE_BOUND('',#146109,.T.); +#146109 = EDGE_LOOP('',(#146110,#146111,#146112,#146118)); +#146110 = ORIENTED_EDGE('',*,*,#146096,.T.); +#146111 = ORIENTED_EDGE('',*,*,#136853,.F.); +#146112 = ORIENTED_EDGE('',*,*,#146113,.F.); +#146113 = EDGE_CURVE('',#137426,#136846,#146114,.T.); +#146114 = LINE('',#146115,#146116); +#146115 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.2)); +#146116 = VECTOR('',#146117,1.); +#146117 = DIRECTION('',(0.,0.,-1.)); +#146118 = ORIENTED_EDGE('',*,*,#137425,.T.); +#146119 = PLANE('',#146120); +#146120 = AXIS2_PLACEMENT_3D('',#146121,#146122,#146123); +#146121 = CARTESIAN_POINT('',(0.251911825898,-2.47446808517,-11.2)); +#146122 = DIRECTION('',(-0.714510248653,-0.699624974233,0.)); +#146123 = DIRECTION('',(-0.699624974233,0.714510248653,0.)); +#146124 = ADVANCED_FACE('',(#146125),#146136,.T.); +#146125 = FACE_BOUND('',#146126,.T.); +#146126 = EDGE_LOOP('',(#146127,#146128,#146129,#146135)); +#146127 = ORIENTED_EDGE('',*,*,#146113,.T.); +#146128 = ORIENTED_EDGE('',*,*,#136845,.F.); +#146129 = ORIENTED_EDGE('',*,*,#146130,.F.); +#146130 = EDGE_CURVE('',#137434,#136838,#146131,.T.); +#146131 = LINE('',#146132,#146133); +#146132 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.2)); +#146133 = VECTOR('',#146134,1.); +#146134 = DIRECTION('',(0.,0.,-1.)); +#146135 = ORIENTED_EDGE('',*,*,#137433,.T.); +#146136 = PLANE('',#146137); +#146137 = AXIS2_PLACEMENT_3D('',#146138,#146139,#146140); +#146138 = CARTESIAN_POINT('',(0.285245175126,-2.491489361972,-11.2)); +#146139 = DIRECTION('',(-0.454776988912,-0.89060535051,0.)); +#146140 = DIRECTION('',(-0.89060535051,0.454776988912,0.)); +#146141 = ADVANCED_FACE('',(#146142),#146153,.T.); +#146142 = FACE_BOUND('',#146143,.T.); +#146143 = EDGE_LOOP('',(#146144,#146145,#146146,#146152)); +#146144 = ORIENTED_EDGE('',*,*,#146130,.T.); +#146145 = ORIENTED_EDGE('',*,*,#136837,.F.); +#146146 = ORIENTED_EDGE('',*,*,#146147,.F.); +#146147 = EDGE_CURVE('',#137442,#136830,#146148,.T.); +#146148 = LINE('',#146149,#146150); +#146149 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.2)); +#146150 = VECTOR('',#146151,1.); +#146151 = DIRECTION('',(0.,0.,-1.)); +#146152 = ORIENTED_EDGE('',*,*,#137441,.T.); +#146153 = PLANE('',#146154); +#146154 = AXIS2_PLACEMENT_3D('',#146155,#146156,#146157); +#146155 = CARTESIAN_POINT('',(0.326911825898,-2.5,-11.2)); +#146156 = DIRECTION('',(-0.200123445161,-0.979770690874,0.)); +#146157 = DIRECTION('',(-0.979770690874,0.200123445161,0.)); +#146158 = ADVANCED_FACE('',(#146159),#146170,.T.); +#146159 = FACE_BOUND('',#146160,.T.); +#146160 = EDGE_LOOP('',(#146161,#146162,#146163,#146169)); +#146161 = ORIENTED_EDGE('',*,*,#146147,.T.); +#146162 = ORIENTED_EDGE('',*,*,#136829,.F.); +#146163 = ORIENTED_EDGE('',*,*,#146164,.F.); +#146164 = EDGE_CURVE('',#137450,#136822,#146165,.T.); +#146165 = LINE('',#146166,#146167); +#146166 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.2)); +#146167 = VECTOR('',#146168,1.); +#146168 = DIRECTION('',(0.,0.,-1.)); +#146169 = ORIENTED_EDGE('',*,*,#137449,.T.); +#146170 = PLANE('',#146171); +#146171 = AXIS2_PLACEMENT_3D('',#146172,#146173,#146174); +#146172 = CARTESIAN_POINT('',(0.401911825898,-2.5,-11.2)); +#146173 = DIRECTION('',(0.,-1.,0.)); +#146174 = DIRECTION('',(0.,0.,-1.)); +#146175 = ADVANCED_FACE('',(#146176),#146187,.T.); +#146176 = FACE_BOUND('',#146177,.T.); +#146177 = EDGE_LOOP('',(#146178,#146179,#146180,#146186)); +#146178 = ORIENTED_EDGE('',*,*,#146164,.T.); +#146179 = ORIENTED_EDGE('',*,*,#136821,.F.); +#146180 = ORIENTED_EDGE('',*,*,#146181,.F.); +#146181 = EDGE_CURVE('',#137458,#136814,#146182,.T.); +#146182 = LINE('',#146183,#146184); +#146183 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.2)); +#146184 = VECTOR('',#146185,1.); +#146185 = DIRECTION('',(-1.942890293094E-14,0.,-1.)); +#146186 = ORIENTED_EDGE('',*,*,#137457,.T.); +#146187 = PLANE('',#146188); +#146188 = AXIS2_PLACEMENT_3D('',#146189,#146190,#146191); +#146189 = CARTESIAN_POINT('',(0.44357847667,-2.491489361972,-11.2)); +#146190 = DIRECTION('',(0.200123445161,-0.979770690874,0.)); +#146191 = DIRECTION('',(0.,0.,-1.)); +#146192 = ADVANCED_FACE('',(#146193),#146204,.T.); +#146193 = FACE_BOUND('',#146194,.T.); +#146194 = EDGE_LOOP('',(#146195,#146196,#146197,#146203)); +#146195 = ORIENTED_EDGE('',*,*,#146181,.T.); +#146196 = ORIENTED_EDGE('',*,*,#136813,.F.); +#146197 = ORIENTED_EDGE('',*,*,#146198,.F.); +#146198 = EDGE_CURVE('',#137466,#136806,#146199,.T.); +#146199 = LINE('',#146200,#146201); +#146200 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.2)); +#146201 = VECTOR('',#146202,1.); +#146202 = DIRECTION('',(-1.387778780781E-14,-2.22044604925E-14,-1.)); +#146203 = ORIENTED_EDGE('',*,*,#137465,.T.); +#146204 = PLANE('',#146205); +#146205 = AXIS2_PLACEMENT_3D('',#146206,#146207,#146208); +#146206 = CARTESIAN_POINT('',(0.476911825898,-2.47446808517,-11.2)); +#146207 = DIRECTION('',(0.454776988912,-0.89060535051,0.)); +#146208 = DIRECTION('',(0.,0.,-1.)); +#146209 = ADVANCED_FACE('',(#146210),#146221,.T.); +#146210 = FACE_BOUND('',#146211,.T.); +#146211 = EDGE_LOOP('',(#146212,#146213,#146214,#146220)); +#146212 = ORIENTED_EDGE('',*,*,#146198,.T.); +#146213 = ORIENTED_EDGE('',*,*,#136805,.F.); +#146214 = ORIENTED_EDGE('',*,*,#146215,.F.); +#146215 = EDGE_CURVE('',#137474,#136798,#146216,.T.); +#146216 = LINE('',#146217,#146218); +#146217 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.2)); +#146218 = VECTOR('',#146219,1.); +#146219 = DIRECTION('',(0.,0.,-1.)); +#146220 = ORIENTED_EDGE('',*,*,#137473,.T.); +#146221 = PLANE('',#146222); +#146222 = AXIS2_PLACEMENT_3D('',#146223,#146224,#146225); +#146223 = CARTESIAN_POINT('',(0.510245151284,-2.440425533056,-11.2)); +#146224 = DIRECTION('',(0.714510498802,-0.699624718761,0.)); +#146225 = DIRECTION('',(0.,0.,-1.)); +#146226 = ADVANCED_FACE('',(#146227),#146238,.T.); +#146227 = FACE_BOUND('',#146228,.T.); +#146228 = EDGE_LOOP('',(#146229,#146230,#146231,#146237)); +#146229 = ORIENTED_EDGE('',*,*,#146215,.T.); +#146230 = ORIENTED_EDGE('',*,*,#136797,.F.); +#146231 = ORIENTED_EDGE('',*,*,#146232,.F.); +#146232 = EDGE_CURVE('',#137482,#136790,#146233,.T.); +#146233 = LINE('',#146234,#146235); +#146234 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.2)); +#146235 = VECTOR('',#146236,1.); +#146236 = DIRECTION('',(0.,0.,-1.)); +#146237 = ORIENTED_EDGE('',*,*,#137481,.T.); +#146238 = PLANE('',#146239); +#146239 = AXIS2_PLACEMENT_3D('',#146240,#146241,#146242); +#146240 = CARTESIAN_POINT('',(0.526911825898,-2.406382977962,-11.2)); +#146241 = DIRECTION('',(0.898138044771,-0.439713602853,0.)); +#146242 = DIRECTION('',(0.,0.,-1.)); +#146243 = ADVANCED_FACE('',(#146244),#146255,.T.); +#146244 = FACE_BOUND('',#146245,.T.); +#146245 = EDGE_LOOP('',(#146246,#146247,#146248,#146254)); +#146246 = ORIENTED_EDGE('',*,*,#146232,.T.); +#146247 = ORIENTED_EDGE('',*,*,#136789,.F.); +#146248 = ORIENTED_EDGE('',*,*,#146249,.F.); +#146249 = EDGE_CURVE('',#137490,#136782,#146250,.T.); +#146250 = LINE('',#146251,#146252); +#146251 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.2)); +#146252 = VECTOR('',#146253,1.); +#146253 = DIRECTION('',(0.,0.,-1.)); +#146254 = ORIENTED_EDGE('',*,*,#137489,.T.); +#146255 = PLANE('',#146256); +#146256 = AXIS2_PLACEMENT_3D('',#146257,#146258,#146259); +#146257 = CARTESIAN_POINT('',(0.535245151284,-2.363829791546,-11.2)); +#146258 = DIRECTION('',(0.98135916906,-0.192182676904,0.)); +#146259 = DIRECTION('',(0.,0.,-1.)); +#146260 = ADVANCED_FACE('',(#146261),#146272,.T.); +#146261 = FACE_BOUND('',#146262,.T.); +#146262 = EDGE_LOOP('',(#146263,#146264,#146265,#146271)); +#146263 = ORIENTED_EDGE('',*,*,#146249,.T.); +#146264 = ORIENTED_EDGE('',*,*,#136781,.F.); +#146265 = ORIENTED_EDGE('',*,*,#146266,.F.); +#146266 = EDGE_CURVE('',#137498,#136774,#146267,.T.); +#146267 = LINE('',#146268,#146269); +#146268 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.2)); +#146269 = VECTOR('',#146270,1.); +#146270 = DIRECTION('',(0.,-2.22044604925E-14,-1.)); +#146271 = ORIENTED_EDGE('',*,*,#137497,.T.); +#146272 = PLANE('',#146273); +#146273 = AXIS2_PLACEMENT_3D('',#146274,#146275,#146276); +#146274 = CARTESIAN_POINT('',(0.535245151284,-2.236170220375,-11.2)); +#146275 = DIRECTION('',(1.,0.,0.)); +#146276 = DIRECTION('',(-0.,1.,0.)); +#146277 = ADVANCED_FACE('',(#146278),#146289,.T.); +#146278 = FACE_BOUND('',#146279,.T.); +#146279 = EDGE_LOOP('',(#146280,#146281,#146282,#146288)); +#146280 = ORIENTED_EDGE('',*,*,#146266,.T.); +#146281 = ORIENTED_EDGE('',*,*,#136773,.F.); +#146282 = ORIENTED_EDGE('',*,*,#146283,.F.); +#146283 = EDGE_CURVE('',#137506,#136766,#146284,.T.); +#146284 = LINE('',#146285,#146286); +#146285 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.2)); +#146286 = VECTOR('',#146287,1.); +#146287 = DIRECTION('',(0.,0.,-1.)); +#146288 = ORIENTED_EDGE('',*,*,#137505,.T.); +#146289 = PLANE('',#146290); +#146290 = AXIS2_PLACEMENT_3D('',#146291,#146292,#146293); +#146291 = CARTESIAN_POINT('',(0.526911825898,-2.193617010117,-11.2)); +#146292 = DIRECTION('',(0.981359189368,0.192182573205,0.)); +#146293 = DIRECTION('',(0.,0.,-1.)); +#146294 = ADVANCED_FACE('',(#146295),#146306,.T.); +#146295 = FACE_BOUND('',#146296,.T.); +#146296 = EDGE_LOOP('',(#146297,#146298,#146299,#146305)); +#146297 = ORIENTED_EDGE('',*,*,#146283,.T.); +#146298 = ORIENTED_EDGE('',*,*,#136765,.F.); +#146299 = ORIENTED_EDGE('',*,*,#146300,.F.); +#146300 = EDGE_CURVE('',#137514,#136758,#146301,.T.); +#146301 = LINE('',#146302,#146303); +#146302 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.2)); +#146303 = VECTOR('',#146304,1.); +#146304 = DIRECTION('',(0.,0.,-1.)); +#146305 = ORIENTED_EDGE('',*,*,#137513,.T.); +#146306 = PLANE('',#146307); +#146307 = AXIS2_PLACEMENT_3D('',#146308,#146309,#146310); +#146308 = CARTESIAN_POINT('',(0.510245151284,-2.159574460983,-11.2)); +#146309 = DIRECTION('',(0.898138014367,0.439713664957,0.)); +#146310 = DIRECTION('',(0.,0.,-1.)); +#146311 = ADVANCED_FACE('',(#146312),#146323,.T.); +#146312 = FACE_BOUND('',#146313,.T.); +#146313 = EDGE_LOOP('',(#146314,#146315,#146316,#146322)); +#146314 = ORIENTED_EDGE('',*,*,#146300,.T.); +#146315 = ORIENTED_EDGE('',*,*,#136757,.F.); +#146316 = ORIENTED_EDGE('',*,*,#146317,.F.); +#146317 = EDGE_CURVE('',#137522,#136750,#146318,.T.); +#146318 = LINE('',#146319,#146320); +#146319 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.2)); +#146320 = VECTOR('',#146321,1.); +#146321 = DIRECTION('',(0.,0.,-1.)); +#146322 = ORIENTED_EDGE('',*,*,#137521,.T.); +#146323 = PLANE('',#146324); +#146324 = AXIS2_PLACEMENT_3D('',#146325,#146326,#146327); +#146325 = CARTESIAN_POINT('',(0.476911825898,-2.12553191185,-11.2)); +#146326 = DIRECTION('',(0.714510468185,0.69962475003,0.)); +#146327 = DIRECTION('',(0.,0.,-1.)); +#146328 = ADVANCED_FACE('',(#146329),#146340,.T.); +#146329 = FACE_BOUND('',#146330,.T.); +#146330 = EDGE_LOOP('',(#146331,#146332,#146333,#146339)); +#146331 = ORIENTED_EDGE('',*,*,#146317,.T.); +#146332 = ORIENTED_EDGE('',*,*,#136749,.F.); +#146333 = ORIENTED_EDGE('',*,*,#146334,.F.); +#146334 = EDGE_CURVE('',#137530,#136742,#146335,.T.); +#146335 = LINE('',#146336,#146337); +#146336 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.2)); +#146337 = VECTOR('',#146338,1.); +#146338 = DIRECTION('',(0.,0.,-1.)); +#146339 = ORIENTED_EDGE('',*,*,#137529,.T.); +#146340 = PLANE('',#146341); +#146341 = AXIS2_PLACEMENT_3D('',#146342,#146343,#146344); +#146342 = CARTESIAN_POINT('',(0.44357847667,-2.108510637283,-11.2)); +#146343 = DIRECTION('',(0.454776941543,0.890605374698,0.)); +#146344 = DIRECTION('',(0.,0.,-1.)); +#146345 = ADVANCED_FACE('',(#146346),#146357,.T.); +#146346 = FACE_BOUND('',#146347,.T.); +#146347 = EDGE_LOOP('',(#146348,#146349,#146350,#146356)); +#146348 = ORIENTED_EDGE('',*,*,#146334,.T.); +#146349 = ORIENTED_EDGE('',*,*,#136741,.F.); +#146350 = ORIENTED_EDGE('',*,*,#146351,.F.); +#146351 = EDGE_CURVE('',#137538,#136734,#146352,.T.); +#146352 = LINE('',#146353,#146354); +#146353 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.2)); +#146354 = VECTOR('',#146355,1.); +#146355 = DIRECTION('',(0.,0.,-1.)); +#146356 = ORIENTED_EDGE('',*,*,#137537,.T.); +#146357 = PLANE('',#146358); +#146358 = AXIS2_PLACEMENT_3D('',#146359,#146360,#146361); +#146359 = CARTESIAN_POINT('',(0.401911825898,-2.1,-11.2)); +#146360 = DIRECTION('',(0.200123428343,0.97977069431,0.)); +#146361 = DIRECTION('',(0.,0.,-1.)); +#146362 = ADVANCED_FACE('',(#146363),#146374,.T.); +#146363 = FACE_BOUND('',#146364,.T.); +#146364 = EDGE_LOOP('',(#146365,#146366,#146367,#146373)); +#146365 = ORIENTED_EDGE('',*,*,#146351,.T.); +#146366 = ORIENTED_EDGE('',*,*,#136733,.F.); +#146367 = ORIENTED_EDGE('',*,*,#146368,.F.); +#146368 = EDGE_CURVE('',#137546,#136726,#146369,.T.); +#146369 = LINE('',#146370,#146371); +#146370 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.2)); +#146371 = VECTOR('',#146372,1.); +#146372 = DIRECTION('',(0.,0.,-1.)); +#146373 = ORIENTED_EDGE('',*,*,#137545,.T.); +#146374 = PLANE('',#146375); +#146375 = AXIS2_PLACEMENT_3D('',#146376,#146377,#146378); +#146376 = CARTESIAN_POINT('',(0.326911825898,-2.1,-11.2)); +#146377 = DIRECTION('',(-0.,1.,0.)); +#146378 = DIRECTION('',(1.,0.,0.)); +#146379 = ADVANCED_FACE('',(#146380),#146391,.T.); +#146380 = FACE_BOUND('',#146381,.T.); +#146381 = EDGE_LOOP('',(#146382,#146383,#146384,#146390)); +#146382 = ORIENTED_EDGE('',*,*,#146368,.T.); +#146383 = ORIENTED_EDGE('',*,*,#136725,.F.); +#146384 = ORIENTED_EDGE('',*,*,#146385,.F.); +#146385 = EDGE_CURVE('',#137554,#136718,#146386,.T.); +#146386 = LINE('',#146387,#146388); +#146387 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.2)); +#146388 = VECTOR('',#146389,1.); +#146389 = DIRECTION('',(0.,0.,-1.)); +#146390 = ORIENTED_EDGE('',*,*,#137553,.T.); +#146391 = PLANE('',#146392); +#146392 = AXIS2_PLACEMENT_3D('',#146393,#146394,#146395); +#146393 = CARTESIAN_POINT('',(0.285245175126,-2.108510637283,-11.2)); +#146394 = DIRECTION('',(-0.200123428343,0.97977069431,0.)); +#146395 = DIRECTION('',(0.,0.,1.)); +#146396 = ADVANCED_FACE('',(#146397),#146408,.T.); +#146397 = FACE_BOUND('',#146398,.T.); +#146398 = EDGE_LOOP('',(#146399,#146400,#146401,#146407)); +#146399 = ORIENTED_EDGE('',*,*,#146385,.T.); +#146400 = ORIENTED_EDGE('',*,*,#136717,.F.); +#146401 = ORIENTED_EDGE('',*,*,#146402,.F.); +#146402 = EDGE_CURVE('',#137562,#136710,#146403,.T.); +#146403 = LINE('',#146404,#146405); +#146404 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.2)); +#146405 = VECTOR('',#146406,1.); +#146406 = DIRECTION('',(0.,0.,-1.)); +#146407 = ORIENTED_EDGE('',*,*,#137561,.T.); +#146408 = PLANE('',#146409); +#146409 = AXIS2_PLACEMENT_3D('',#146410,#146411,#146412); +#146410 = CARTESIAN_POINT('',(0.251911825898,-2.12553191185,-11.2)); +#146411 = DIRECTION('',(-0.454776941543,0.890605374698,0.)); +#146412 = DIRECTION('',(0.,0.,1.)); +#146413 = ADVANCED_FACE('',(#146414),#146425,.T.); +#146414 = FACE_BOUND('',#146415,.T.); +#146415 = EDGE_LOOP('',(#146416,#146417,#146418,#146424)); +#146416 = ORIENTED_EDGE('',*,*,#146402,.T.); +#146417 = ORIENTED_EDGE('',*,*,#136709,.F.); +#146418 = ORIENTED_EDGE('',*,*,#146419,.F.); +#146419 = EDGE_CURVE('',#137570,#136702,#146420,.T.); +#146420 = LINE('',#146421,#146422); +#146421 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.2)); +#146422 = VECTOR('',#146423,1.); +#146423 = DIRECTION('',(0.,0.,-1.)); +#146424 = ORIENTED_EDGE('',*,*,#137569,.T.); +#146425 = PLANE('',#146426); +#146426 = AXIS2_PLACEMENT_3D('',#146427,#146428,#146429); +#146427 = CARTESIAN_POINT('',(0.21857847667,-2.159574460983,-11.2)); +#146428 = DIRECTION('',(-0.714510218035,0.699625005502,0.)); +#146429 = DIRECTION('',(0.,0.,1.)); +#146430 = ADVANCED_FACE('',(#146431),#146442,.T.); +#146431 = FACE_BOUND('',#146432,.T.); +#146432 = EDGE_LOOP('',(#146433,#146434,#146435,#146441)); +#146433 = ORIENTED_EDGE('',*,*,#146419,.T.); +#146434 = ORIENTED_EDGE('',*,*,#136701,.F.); +#146435 = ORIENTED_EDGE('',*,*,#146436,.F.); +#146436 = EDGE_CURVE('',#137578,#136694,#146437,.T.); +#146437 = LINE('',#146438,#146439); +#146438 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.2)); +#146439 = VECTOR('',#146440,1.); +#146440 = DIRECTION('',(0.,0.,-1.)); +#146441 = ORIENTED_EDGE('',*,*,#137577,.T.); +#146442 = PLANE('',#146443); +#146443 = AXIS2_PLACEMENT_3D('',#146444,#146445,#146446); +#146444 = CARTESIAN_POINT('',(0.210245175126,-2.202127671242,-11.2)); +#146445 = DIRECTION('',(-0.981359293067,0.192182043673,0.)); +#146446 = DIRECTION('',(0.,0.,1.)); +#146447 = ADVANCED_FACE('',(#146448),#146459,.T.); +#146448 = FACE_BOUND('',#146449,.T.); +#146449 = EDGE_LOOP('',(#146450,#146451,#146452,#146458)); +#146450 = ORIENTED_EDGE('',*,*,#146436,.T.); +#146451 = ORIENTED_EDGE('',*,*,#136693,.F.); +#146452 = ORIENTED_EDGE('',*,*,#146453,.F.); +#146453 = EDGE_CURVE('',#137586,#136686,#146454,.T.); +#146454 = LINE('',#146455,#146456); +#146455 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.2)); +#146456 = VECTOR('',#146457,1.); +#146457 = DIRECTION('',(0.,0.,-1.)); +#146458 = ORIENTED_EDGE('',*,*,#137585,.T.); +#146459 = PLANE('',#146460); +#146460 = AXIS2_PLACEMENT_3D('',#146461,#146462,#146463); +#146461 = CARTESIAN_POINT('',(0.260245175126,-2.202127671242,-11.2)); +#146462 = DIRECTION('',(0.,-1.,0.)); +#146463 = DIRECTION('',(0.,0.,-1.)); +#146464 = ADVANCED_FACE('',(#146465),#146476,.T.); +#146465 = FACE_BOUND('',#146466,.T.); +#146466 = EDGE_LOOP('',(#146467,#146468,#146469,#146475)); +#146467 = ORIENTED_EDGE('',*,*,#146453,.T.); +#146468 = ORIENTED_EDGE('',*,*,#136685,.F.); +#146469 = ORIENTED_EDGE('',*,*,#146470,.F.); +#146470 = EDGE_CURVE('',#137594,#136678,#146471,.T.); +#146471 = LINE('',#146472,#146473); +#146472 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.2)); +#146473 = VECTOR('',#146474,1.); +#146474 = DIRECTION('',(0.,0.,-1.)); +#146475 = ORIENTED_EDGE('',*,*,#137593,.T.); +#146476 = PLANE('',#146477); +#146477 = AXIS2_PLACEMENT_3D('',#146478,#146479,#146480); +#146478 = CARTESIAN_POINT('',(0.26857847667,-2.17659573555,-11.2)); +#146479 = DIRECTION('',(0.950645626703,-0.31027873345,0.)); +#146480 = DIRECTION('',(0.,0.,-1.)); +#146481 = ADVANCED_FACE('',(#146482),#146493,.T.); +#146482 = FACE_BOUND('',#146483,.T.); +#146483 = EDGE_LOOP('',(#146484,#146485,#146486,#146492)); +#146484 = ORIENTED_EDGE('',*,*,#146470,.T.); +#146485 = ORIENTED_EDGE('',*,*,#136677,.F.); +#146486 = ORIENTED_EDGE('',*,*,#146487,.F.); +#146487 = EDGE_CURVE('',#137602,#136670,#146488,.T.); +#146488 = LINE('',#146489,#146490); +#146489 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.2)); +#146490 = VECTOR('',#146491,1.); +#146491 = DIRECTION('',(0.,0.,-1.)); +#146492 = ORIENTED_EDGE('',*,*,#137601,.T.); +#146493 = PLANE('',#146494); +#146494 = AXIS2_PLACEMENT_3D('',#146495,#146496,#146497); +#146495 = CARTESIAN_POINT('',(0.29357847667,-2.159574460983,-11.2)); +#146496 = DIRECTION('',(0.562790931242,-0.8265992788,0.)); +#146497 = DIRECTION('',(0.,0.,-1.)); +#146498 = ADVANCED_FACE('',(#146499),#146510,.T.); +#146499 = FACE_BOUND('',#146500,.T.); +#146500 = EDGE_LOOP('',(#146501,#146502,#146503,#146509)); +#146501 = ORIENTED_EDGE('',*,*,#146487,.T.); +#146502 = ORIENTED_EDGE('',*,*,#136669,.F.); +#146503 = ORIENTED_EDGE('',*,*,#146504,.F.); +#146504 = EDGE_CURVE('',#137610,#136662,#146505,.T.); +#146505 = LINE('',#146506,#146507); +#146506 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.2)); +#146507 = VECTOR('',#146508,1.); +#146508 = DIRECTION('',(0.,0.,-1.)); +#146509 = ORIENTED_EDGE('',*,*,#137609,.T.); +#146510 = PLANE('',#146511); +#146511 = AXIS2_PLACEMENT_3D('',#146512,#146513,#146514); +#146512 = CARTESIAN_POINT('',(0.326911825898,-2.1510638237,-11.2)); +#146513 = DIRECTION('',(0.247383106838,-0.968917745968,0.)); +#146514 = DIRECTION('',(0.,0.,-1.)); +#146515 = ADVANCED_FACE('',(#146516),#146527,.T.); +#146516 = FACE_BOUND('',#146517,.T.); +#146517 = EDGE_LOOP('',(#146518,#146519,#146520,#146526)); +#146518 = ORIENTED_EDGE('',*,*,#146504,.T.); +#146519 = ORIENTED_EDGE('',*,*,#136661,.F.); +#146520 = ORIENTED_EDGE('',*,*,#146521,.F.); +#146521 = EDGE_CURVE('',#137618,#136654,#146522,.T.); +#146522 = LINE('',#146523,#146524); +#146523 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.2)); +#146524 = VECTOR('',#146525,1.); +#146525 = DIRECTION('',(0.,0.,-1.)); +#146526 = ORIENTED_EDGE('',*,*,#137617,.T.); +#146527 = PLANE('',#146528); +#146528 = AXIS2_PLACEMENT_3D('',#146529,#146530,#146531); +#146529 = CARTESIAN_POINT('',(0.401911825898,-2.1510638237,-11.2)); +#146530 = DIRECTION('',(0.,-1.,0.)); +#146531 = DIRECTION('',(0.,0.,-1.)); +#146532 = ADVANCED_FACE('',(#146533),#146544,.T.); +#146533 = FACE_BOUND('',#146534,.T.); +#146534 = EDGE_LOOP('',(#146535,#146536,#146537,#146543)); +#146535 = ORIENTED_EDGE('',*,*,#146521,.T.); +#146536 = ORIENTED_EDGE('',*,*,#136653,.F.); +#146537 = ORIENTED_EDGE('',*,*,#146538,.F.); +#146538 = EDGE_CURVE('',#137626,#136646,#146539,.T.); +#146539 = LINE('',#146540,#146541); +#146540 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.2)); +#146541 = VECTOR('',#146542,1.); +#146542 = DIRECTION('',(1.110223024625E-14,0.,-1.)); +#146543 = ORIENTED_EDGE('',*,*,#137625,.T.); +#146544 = PLANE('',#146545); +#146545 = AXIS2_PLACEMENT_3D('',#146546,#146547,#146548); +#146546 = CARTESIAN_POINT('',(0.435245175126,-2.159574460983,-11.2)); +#146547 = DIRECTION('',(-0.247383106838,-0.968917745968,0.)); +#146548 = DIRECTION('',(-0.968917745968,0.247383106838,0.)); +#146549 = ADVANCED_FACE('',(#146550),#146561,.T.); +#146550 = FACE_BOUND('',#146551,.T.); +#146551 = EDGE_LOOP('',(#146552,#146553,#146554,#146560)); +#146552 = ORIENTED_EDGE('',*,*,#146538,.T.); +#146553 = ORIENTED_EDGE('',*,*,#136645,.F.); +#146554 = ORIENTED_EDGE('',*,*,#146555,.F.); +#146555 = EDGE_CURVE('',#137634,#136638,#146556,.T.); +#146556 = LINE('',#146557,#146558); +#146557 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.2)); +#146558 = VECTOR('',#146559,1.); +#146559 = DIRECTION('',(0.,0.,-1.)); +#146560 = ORIENTED_EDGE('',*,*,#137633,.T.); +#146561 = PLANE('',#146562); +#146562 = AXIS2_PLACEMENT_3D('',#146563,#146564,#146565); +#146563 = CARTESIAN_POINT('',(0.460245175126,-2.17659573555,-11.2)); +#146564 = DIRECTION('',(-0.562790931242,-0.8265992788,0.)); +#146565 = DIRECTION('',(-0.8265992788,0.562790931242,0.)); +#146566 = ADVANCED_FACE('',(#146567),#146578,.T.); +#146567 = FACE_BOUND('',#146568,.T.); +#146568 = EDGE_LOOP('',(#146569,#146570,#146571,#146577)); +#146569 = ORIENTED_EDGE('',*,*,#146555,.T.); +#146570 = ORIENTED_EDGE('',*,*,#136637,.F.); +#146571 = ORIENTED_EDGE('',*,*,#146572,.F.); +#146572 = EDGE_CURVE('',#137642,#136630,#146573,.T.); +#146573 = LINE('',#146574,#146575); +#146574 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.2)); +#146575 = VECTOR('',#146576,1.); +#146576 = DIRECTION('',(0.,0.,-1.)); +#146577 = ORIENTED_EDGE('',*,*,#137641,.T.); +#146578 = PLANE('',#146579); +#146579 = AXIS2_PLACEMENT_3D('',#146580,#146581,#146582); +#146580 = CARTESIAN_POINT('',(0.476911825898,-2.202127671242,-11.2)); +#146581 = DIRECTION('',(-0.837379592799,-0.546621823168,0.)); +#146582 = DIRECTION('',(-0.546621823168,0.837379592799,0.)); +#146583 = ADVANCED_FACE('',(#146584),#146595,.T.); +#146584 = FACE_BOUND('',#146585,.T.); +#146585 = EDGE_LOOP('',(#146586,#146587,#146588,#146594)); +#146586 = ORIENTED_EDGE('',*,*,#146572,.T.); +#146587 = ORIENTED_EDGE('',*,*,#136629,.F.); +#146588 = ORIENTED_EDGE('',*,*,#146589,.F.); +#146589 = EDGE_CURVE('',#137650,#136622,#146590,.T.); +#146590 = LINE('',#146591,#146592); +#146591 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.2)); +#146592 = VECTOR('',#146593,1.); +#146593 = DIRECTION('',(0.,0.,-1.)); +#146594 = ORIENTED_EDGE('',*,*,#137649,.T.); +#146595 = PLANE('',#146596); +#146596 = AXIS2_PLACEMENT_3D('',#146597,#146598,#146599); +#146597 = CARTESIAN_POINT('',(0.485245175126,-2.236170220375,-11.2)); +#146598 = DIRECTION('',(-0.971321049125,-0.237771780341,0.)); +#146599 = DIRECTION('',(-0.237771780341,0.971321049125,0.)); +#146600 = ADVANCED_FACE('',(#146601),#146612,.T.); +#146601 = FACE_BOUND('',#146602,.T.); +#146602 = EDGE_LOOP('',(#146603,#146604,#146605,#146611)); +#146603 = ORIENTED_EDGE('',*,*,#146589,.T.); +#146604 = ORIENTED_EDGE('',*,*,#136621,.F.); +#146605 = ORIENTED_EDGE('',*,*,#146606,.F.); +#146606 = EDGE_CURVE('',#137658,#136614,#146607,.T.); +#146607 = LINE('',#146608,#146609); +#146608 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.2)); +#146609 = VECTOR('',#146610,1.); +#146610 = DIRECTION('',(0.,0.,-1.)); +#146611 = ORIENTED_EDGE('',*,*,#137657,.T.); +#146612 = PLANE('',#146613); +#146613 = AXIS2_PLACEMENT_3D('',#146614,#146615,#146616); +#146614 = CARTESIAN_POINT('',(0.485245175126,-2.363829791546,-11.2)); +#146615 = DIRECTION('',(-1.,0.,0.)); +#146616 = DIRECTION('',(0.,0.,1.)); +#146617 = ADVANCED_FACE('',(#146618),#146629,.T.); +#146618 = FACE_BOUND('',#146619,.T.); +#146619 = EDGE_LOOP('',(#146620,#146621,#146622,#146628)); +#146620 = ORIENTED_EDGE('',*,*,#146606,.T.); +#146621 = ORIENTED_EDGE('',*,*,#136613,.F.); +#146622 = ORIENTED_EDGE('',*,*,#146623,.F.); +#146623 = EDGE_CURVE('',#137666,#136606,#146624,.T.); +#146624 = LINE('',#146625,#146626); +#146625 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.2)); +#146626 = VECTOR('',#146627,1.); +#146627 = DIRECTION('',(0.,2.22044604925E-14,-1.)); +#146628 = ORIENTED_EDGE('',*,*,#137665,.T.); +#146629 = PLANE('',#146630); +#146630 = AXIS2_PLACEMENT_3D('',#146631,#146632,#146633); +#146631 = CARTESIAN_POINT('',(0.476911825898,-2.397872340679,-11.2)); +#146632 = DIRECTION('',(-0.971321049125,0.237771780341,0.)); +#146633 = DIRECTION('',(0.,0.,1.)); +#146634 = ADVANCED_FACE('',(#146635),#146646,.T.); +#146635 = FACE_BOUND('',#146636,.T.); +#146636 = EDGE_LOOP('',(#146637,#146638,#146639,#146645)); +#146637 = ORIENTED_EDGE('',*,*,#146623,.T.); +#146638 = ORIENTED_EDGE('',*,*,#136605,.F.); +#146639 = ORIENTED_EDGE('',*,*,#146640,.F.); +#146640 = EDGE_CURVE('',#137674,#136598,#146641,.T.); +#146641 = LINE('',#146642,#146643); +#146642 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.2)); +#146643 = VECTOR('',#146644,1.); +#146644 = DIRECTION('',(0.,0.,-1.)); +#146645 = ORIENTED_EDGE('',*,*,#137673,.T.); +#146646 = PLANE('',#146647); +#146647 = AXIS2_PLACEMENT_3D('',#146648,#146649,#146650); +#146648 = CARTESIAN_POINT('',(0.460245175126,-2.423404252529,-11.2)); +#146649 = DIRECTION('',(-0.837379359156,0.546622181089,0.)); +#146650 = DIRECTION('',(0.,0.,1.)); +#146651 = ADVANCED_FACE('',(#146652),#146663,.T.); +#146652 = FACE_BOUND('',#146653,.T.); +#146653 = EDGE_LOOP('',(#146654,#146655,#146656,#146662)); +#146654 = ORIENTED_EDGE('',*,*,#146640,.T.); +#146655 = ORIENTED_EDGE('',*,*,#136597,.F.); +#146656 = ORIENTED_EDGE('',*,*,#146657,.F.); +#146657 = EDGE_CURVE('',#137682,#136590,#146658,.T.); +#146658 = LINE('',#146659,#146660); +#146659 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.2)); +#146660 = VECTOR('',#146661,1.); +#146661 = DIRECTION('',(1.110223024625E-14,0.,-1.)); +#146662 = ORIENTED_EDGE('',*,*,#137681,.T.); +#146663 = PLANE('',#146664); +#146664 = AXIS2_PLACEMENT_3D('',#146665,#146666,#146667); +#146665 = CARTESIAN_POINT('',(0.435245175126,-2.440425533056,-11.2)); +#146666 = DIRECTION('',(-0.562791065897,0.826599187119,0.)); +#146667 = DIRECTION('',(0.,0.,1.)); +#146668 = ADVANCED_FACE('',(#146669),#146680,.T.); +#146669 = FACE_BOUND('',#146670,.T.); +#146670 = EDGE_LOOP('',(#146671,#146672,#146673,#146679)); +#146671 = ORIENTED_EDGE('',*,*,#146657,.T.); +#146672 = ORIENTED_EDGE('',*,*,#136589,.F.); +#146673 = ORIENTED_EDGE('',*,*,#146674,.F.); +#146674 = EDGE_CURVE('',#137690,#136582,#146675,.T.); +#146675 = LINE('',#146676,#146677); +#146676 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.2)); +#146677 = VECTOR('',#146678,1.); +#146678 = DIRECTION('',(0.,0.,-1.)); +#146679 = ORIENTED_EDGE('',*,*,#137689,.T.); +#146680 = PLANE('',#146681); +#146681 = AXIS2_PLACEMENT_3D('',#146682,#146683,#146684); +#146682 = CARTESIAN_POINT('',(0.401911825898,-2.44893617034,-11.2)); +#146683 = DIRECTION('',(-0.247383106838,0.968917745968,0.)); +#146684 = DIRECTION('',(0.,0.,1.)); +#146685 = ADVANCED_FACE('',(#146686),#146697,.T.); +#146686 = FACE_BOUND('',#146687,.T.); +#146687 = EDGE_LOOP('',(#146688,#146689,#146690,#146696)); +#146688 = ORIENTED_EDGE('',*,*,#146674,.T.); +#146689 = ORIENTED_EDGE('',*,*,#136581,.F.); +#146690 = ORIENTED_EDGE('',*,*,#146691,.F.); +#146691 = EDGE_CURVE('',#137698,#136574,#146692,.T.); +#146692 = LINE('',#146693,#146694); +#146693 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.2)); +#146694 = VECTOR('',#146695,1.); +#146695 = DIRECTION('',(0.,0.,-1.)); +#146696 = ORIENTED_EDGE('',*,*,#137697,.T.); +#146697 = PLANE('',#146698); +#146698 = AXIS2_PLACEMENT_3D('',#146699,#146700,#146701); +#146699 = CARTESIAN_POINT('',(0.326911825898,-2.44893617034,-11.2)); +#146700 = DIRECTION('',(-0.,1.,0.)); +#146701 = DIRECTION('',(1.,0.,0.)); +#146702 = ADVANCED_FACE('',(#146703),#146714,.T.); +#146703 = FACE_BOUND('',#146704,.T.); +#146704 = EDGE_LOOP('',(#146705,#146706,#146707,#146713)); +#146705 = ORIENTED_EDGE('',*,*,#146691,.T.); +#146706 = ORIENTED_EDGE('',*,*,#136573,.F.); +#146707 = ORIENTED_EDGE('',*,*,#146708,.F.); +#146708 = EDGE_CURVE('',#137706,#136566,#146709,.T.); +#146709 = LINE('',#146710,#146711); +#146710 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.2)); +#146711 = VECTOR('',#146712,1.); +#146712 = DIRECTION('',(0.,0.,-1.)); +#146713 = ORIENTED_EDGE('',*,*,#137705,.T.); +#146714 = PLANE('',#146715); +#146715 = AXIS2_PLACEMENT_3D('',#146716,#146717,#146718); +#146716 = CARTESIAN_POINT('',(0.29357847667,-2.440425533056,-11.2)); +#146717 = DIRECTION('',(0.247383106838,0.968917745968,0.)); +#146718 = DIRECTION('',(0.,0.,-1.)); +#146719 = ADVANCED_FACE('',(#146720),#146731,.T.); +#146720 = FACE_BOUND('',#146721,.T.); +#146721 = EDGE_LOOP('',(#146722,#146723,#146724,#146730)); +#146722 = ORIENTED_EDGE('',*,*,#146708,.T.); +#146723 = ORIENTED_EDGE('',*,*,#136565,.F.); +#146724 = ORIENTED_EDGE('',*,*,#146725,.F.); +#146725 = EDGE_CURVE('',#137714,#136558,#146726,.T.); +#146726 = LINE('',#146727,#146728); +#146727 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.2)); +#146728 = VECTOR('',#146729,1.); +#146729 = DIRECTION('',(0.,0.,-1.)); +#146730 = ORIENTED_EDGE('',*,*,#137713,.T.); +#146731 = PLANE('',#146732); +#146732 = AXIS2_PLACEMENT_3D('',#146733,#146734,#146735); +#146733 = CARTESIAN_POINT('',(0.26857847667,-2.423404252529,-11.2)); +#146734 = DIRECTION('',(0.562791065897,0.826599187119,0.)); +#146735 = DIRECTION('',(0.,0.,-1.)); +#146736 = ADVANCED_FACE('',(#146737),#146743,.T.); +#146737 = FACE_BOUND('',#146738,.T.); +#146738 = EDGE_LOOP('',(#146739,#146740,#146741,#146742)); +#146739 = ORIENTED_EDGE('',*,*,#146725,.T.); +#146740 = ORIENTED_EDGE('',*,*,#136555,.F.); +#146741 = ORIENTED_EDGE('',*,*,#146072,.F.); +#146742 = ORIENTED_EDGE('',*,*,#137721,.T.); +#146743 = PLANE('',#146744); +#146744 = AXIS2_PLACEMENT_3D('',#146745,#146746,#146747); +#146745 = CARTESIAN_POINT('',(0.260245175126,-2.397872340679,-11.2)); +#146746 = DIRECTION('',(0.950645541239,0.310278995296,0.)); +#146747 = DIRECTION('',(0.,0.,-1.)); +#146748 = ADVANCED_FACE('',(#146749),#146765,.T.); +#146749 = FACE_BOUND('',#146750,.T.); +#146750 = EDGE_LOOP('',(#146751,#146757,#146758,#146764)); +#146751 = ORIENTED_EDGE('',*,*,#146752,.T.); +#146752 = EDGE_CURVE('',#137820,#136884,#146753,.T.); +#146753 = LINE('',#146754,#146755); +#146754 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.2)); +#146755 = VECTOR('',#146756,1.); +#146756 = DIRECTION('',(0.,0.,-1.)); +#146757 = ORIENTED_EDGE('',*,*,#136973,.F.); +#146758 = ORIENTED_EDGE('',*,*,#146759,.F.); +#146759 = EDGE_CURVE('',#137740,#136966,#146760,.T.); +#146760 = LINE('',#146761,#146762); +#146761 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.2)); +#146762 = VECTOR('',#146763,1.); +#146763 = DIRECTION('',(0.,0.,-1.)); +#146764 = ORIENTED_EDGE('',*,*,#137827,.T.); +#146765 = PLANE('',#146766); +#146766 = AXIS2_PLACEMENT_3D('',#146767,#146768,#146769); +#146767 = CARTESIAN_POINT('',(-0.156421475646,-2.44893617034,-11.2)); +#146768 = DIRECTION('',(-0.,1.,0.)); +#146769 = DIRECTION('',(1.,0.,0.)); +#146770 = ADVANCED_FACE('',(#146771),#146782,.T.); +#146771 = FACE_BOUND('',#146772,.T.); +#146772 = EDGE_LOOP('',(#146773,#146774,#146775,#146781)); +#146773 = ORIENTED_EDGE('',*,*,#146759,.T.); +#146774 = ORIENTED_EDGE('',*,*,#136965,.F.); +#146775 = ORIENTED_EDGE('',*,*,#146776,.F.); +#146776 = EDGE_CURVE('',#137738,#136958,#146777,.T.); +#146777 = LINE('',#146778,#146779); +#146778 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.2)); +#146779 = VECTOR('',#146780,1.); +#146780 = DIRECTION('',(0.,0.,-1.)); +#146781 = ORIENTED_EDGE('',*,*,#137737,.T.); +#146782 = PLANE('',#146783); +#146783 = AXIS2_PLACEMENT_3D('',#146784,#146785,#146786); +#146784 = CARTESIAN_POINT('',(-0.156421475646,-2.5,-11.2)); +#146785 = DIRECTION('',(-1.,0.,0.)); +#146786 = DIRECTION('',(0.,0.,1.)); +#146787 = ADVANCED_FACE('',(#146788),#146799,.T.); +#146788 = FACE_BOUND('',#146789,.T.); +#146789 = EDGE_LOOP('',(#146790,#146791,#146792,#146798)); +#146790 = ORIENTED_EDGE('',*,*,#146776,.T.); +#146791 = ORIENTED_EDGE('',*,*,#136957,.F.); +#146792 = ORIENTED_EDGE('',*,*,#146793,.F.); +#146793 = EDGE_CURVE('',#137748,#136950,#146794,.T.); +#146794 = LINE('',#146795,#146796); +#146795 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.2)); +#146796 = VECTOR('',#146797,1.); +#146797 = DIRECTION('',(0.,0.,-1.)); +#146798 = ORIENTED_EDGE('',*,*,#137747,.T.); +#146799 = PLANE('',#146800); +#146800 = AXIS2_PLACEMENT_3D('',#146801,#146802,#146803); +#146801 = CARTESIAN_POINT('',(0.14357847667,-2.5,-11.2)); +#146802 = DIRECTION('',(0.,-1.,0.)); +#146803 = DIRECTION('',(0.,0.,-1.)); +#146804 = ADVANCED_FACE('',(#146805),#146816,.T.); +#146805 = FACE_BOUND('',#146806,.T.); +#146806 = EDGE_LOOP('',(#146807,#146808,#146809,#146815)); +#146807 = ORIENTED_EDGE('',*,*,#146793,.T.); +#146808 = ORIENTED_EDGE('',*,*,#136949,.F.); +#146809 = ORIENTED_EDGE('',*,*,#146810,.F.); +#146810 = EDGE_CURVE('',#137756,#136942,#146811,.T.); +#146811 = LINE('',#146812,#146813); +#146812 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.2)); +#146813 = VECTOR('',#146814,1.); +#146814 = DIRECTION('',(0.,0.,-1.)); +#146815 = ORIENTED_EDGE('',*,*,#137755,.T.); +#146816 = PLANE('',#146817); +#146817 = AXIS2_PLACEMENT_3D('',#146818,#146819,#146820); +#146818 = CARTESIAN_POINT('',(0.14357847667,-2.1,-11.2)); +#146819 = DIRECTION('',(1.,0.,0.)); +#146820 = DIRECTION('',(-0.,1.,0.)); +#146821 = ADVANCED_FACE('',(#146822),#146833,.T.); +#146822 = FACE_BOUND('',#146823,.T.); +#146823 = EDGE_LOOP('',(#146824,#146825,#146826,#146832)); +#146824 = ORIENTED_EDGE('',*,*,#146810,.T.); +#146825 = ORIENTED_EDGE('',*,*,#136941,.F.); +#146826 = ORIENTED_EDGE('',*,*,#146827,.F.); +#146827 = EDGE_CURVE('',#137764,#136934,#146828,.T.); +#146828 = LINE('',#146829,#146830); +#146829 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.2)); +#146830 = VECTOR('',#146831,1.); +#146831 = DIRECTION('',(0.,0.,-1.)); +#146832 = ORIENTED_EDGE('',*,*,#137763,.T.); +#146833 = PLANE('',#146834); +#146834 = AXIS2_PLACEMENT_3D('',#146835,#146836,#146837); +#146835 = CARTESIAN_POINT('',(-0.156421475646,-2.1,-11.2)); +#146836 = DIRECTION('',(-0.,1.,0.)); +#146837 = DIRECTION('',(1.,0.,0.)); +#146838 = ADVANCED_FACE('',(#146839),#146850,.T.); +#146839 = FACE_BOUND('',#146840,.T.); +#146840 = EDGE_LOOP('',(#146841,#146842,#146843,#146849)); +#146841 = ORIENTED_EDGE('',*,*,#146827,.T.); +#146842 = ORIENTED_EDGE('',*,*,#136933,.F.); +#146843 = ORIENTED_EDGE('',*,*,#146844,.F.); +#146844 = EDGE_CURVE('',#137772,#136926,#146845,.T.); +#146845 = LINE('',#146846,#146847); +#146846 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.2)); +#146847 = VECTOR('',#146848,1.); +#146848 = DIRECTION('',(0.,0.,-1.)); +#146849 = ORIENTED_EDGE('',*,*,#137771,.T.); +#146850 = PLANE('',#146851); +#146851 = AXIS2_PLACEMENT_3D('',#146852,#146853,#146854); +#146852 = CARTESIAN_POINT('',(-0.156421475646,-2.1510638237,-11.2)); +#146853 = DIRECTION('',(-1.,0.,0.)); +#146854 = DIRECTION('',(0.,0.,1.)); +#146855 = ADVANCED_FACE('',(#146856),#146867,.T.); +#146856 = FACE_BOUND('',#146857,.T.); +#146857 = EDGE_LOOP('',(#146858,#146859,#146860,#146866)); +#146858 = ORIENTED_EDGE('',*,*,#146844,.T.); +#146859 = ORIENTED_EDGE('',*,*,#136925,.F.); +#146860 = ORIENTED_EDGE('',*,*,#146861,.F.); +#146861 = EDGE_CURVE('',#137780,#136918,#146862,.T.); +#146862 = LINE('',#146863,#146864); +#146863 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.2)); +#146864 = VECTOR('',#146865,1.); +#146865 = DIRECTION('',(0.,0.,-1.)); +#146866 = ORIENTED_EDGE('',*,*,#137779,.T.); +#146867 = PLANE('',#146868); +#146868 = AXIS2_PLACEMENT_3D('',#146869,#146870,#146871); +#146869 = CARTESIAN_POINT('',(9.357852435397E-02,-2.1510638237,-11.2)); +#146870 = DIRECTION('',(0.,-1.,0.)); +#146871 = DIRECTION('',(0.,0.,-1.)); +#146872 = ADVANCED_FACE('',(#146873),#146884,.T.); +#146873 = FACE_BOUND('',#146874,.T.); +#146874 = EDGE_LOOP('',(#146875,#146876,#146877,#146883)); +#146875 = ORIENTED_EDGE('',*,*,#146861,.T.); +#146876 = ORIENTED_EDGE('',*,*,#136917,.F.); +#146877 = ORIENTED_EDGE('',*,*,#146878,.F.); +#146878 = EDGE_CURVE('',#137788,#136910,#146879,.T.); +#146879 = LINE('',#146880,#146881); +#146880 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.2) + ); +#146881 = VECTOR('',#146882,1.); +#146882 = DIRECTION('',(0.,0.,-1.)); +#146883 = ORIENTED_EDGE('',*,*,#137787,.T.); +#146884 = PLANE('',#146885); +#146885 = AXIS2_PLACEMENT_3D('',#146886,#146887,#146888); +#146886 = CARTESIAN_POINT('',(9.357852435397E-02,-2.261702132225,-11.2) + ); +#146887 = DIRECTION('',(-1.,0.,0.)); +#146888 = DIRECTION('',(0.,0.,1.)); +#146889 = ADVANCED_FACE('',(#146890),#146901,.T.); +#146890 = FACE_BOUND('',#146891,.T.); +#146891 = EDGE_LOOP('',(#146892,#146893,#146894,#146900)); +#146892 = ORIENTED_EDGE('',*,*,#146878,.T.); +#146893 = ORIENTED_EDGE('',*,*,#136909,.F.); +#146894 = ORIENTED_EDGE('',*,*,#146895,.F.); +#146895 = EDGE_CURVE('',#137796,#136902,#146896,.T.); +#146896 = LINE('',#146897,#146898); +#146897 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.2)); +#146898 = VECTOR('',#146899,1.); +#146899 = DIRECTION('',(0.,0.,-1.)); +#146900 = ORIENTED_EDGE('',*,*,#137795,.T.); +#146901 = PLANE('',#146902); +#146902 = AXIS2_PLACEMENT_3D('',#146903,#146904,#146905); +#146903 = CARTESIAN_POINT('',(-0.123088174102,-2.261702132225,-11.2)); +#146904 = DIRECTION('',(-0.,1.,0.)); +#146905 = DIRECTION('',(1.,0.,0.)); +#146906 = ADVANCED_FACE('',(#146907),#146918,.T.); +#146907 = FACE_BOUND('',#146908,.T.); +#146908 = EDGE_LOOP('',(#146909,#146910,#146911,#146917)); +#146909 = ORIENTED_EDGE('',*,*,#146895,.T.); +#146910 = ORIENTED_EDGE('',*,*,#136901,.F.); +#146911 = ORIENTED_EDGE('',*,*,#146912,.F.); +#146912 = EDGE_CURVE('',#137804,#136894,#146913,.T.); +#146913 = LINE('',#146914,#146915); +#146914 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.2)); +#146915 = VECTOR('',#146916,1.); +#146916 = DIRECTION('',(0.,0.,-1.)); +#146917 = ORIENTED_EDGE('',*,*,#137803,.T.); +#146918 = PLANE('',#146919); +#146919 = AXIS2_PLACEMENT_3D('',#146920,#146921,#146922); +#146920 = CARTESIAN_POINT('',(-0.123088174102,-2.312765955925,-11.2)); +#146921 = DIRECTION('',(-1.,0.,0.)); +#146922 = DIRECTION('',(0.,0.,1.)); +#146923 = ADVANCED_FACE('',(#146924),#146935,.T.); +#146924 = FACE_BOUND('',#146925,.T.); +#146925 = EDGE_LOOP('',(#146926,#146927,#146928,#146934)); +#146926 = ORIENTED_EDGE('',*,*,#146912,.T.); +#146927 = ORIENTED_EDGE('',*,*,#136893,.F.); +#146928 = ORIENTED_EDGE('',*,*,#146929,.F.); +#146929 = EDGE_CURVE('',#137812,#136886,#146930,.T.); +#146930 = LINE('',#146931,#146932); +#146931 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.2) + ); +#146932 = VECTOR('',#146933,1.); +#146933 = DIRECTION('',(0.,0.,-1.)); +#146934 = ORIENTED_EDGE('',*,*,#137811,.T.); +#146935 = PLANE('',#146936); +#146936 = AXIS2_PLACEMENT_3D('',#146937,#146938,#146939); +#146937 = CARTESIAN_POINT('',(9.357852435397E-02,-2.312765955925,-11.2) + ); +#146938 = DIRECTION('',(0.,-1.,0.)); +#146939 = DIRECTION('',(0.,0.,-1.)); +#146940 = ADVANCED_FACE('',(#146941),#146947,.T.); +#146941 = FACE_BOUND('',#146942,.T.); +#146942 = EDGE_LOOP('',(#146943,#146944,#146945,#146946)); +#146943 = ORIENTED_EDGE('',*,*,#146929,.T.); +#146944 = ORIENTED_EDGE('',*,*,#136883,.F.); +#146945 = ORIENTED_EDGE('',*,*,#146752,.F.); +#146946 = ORIENTED_EDGE('',*,*,#137819,.T.); +#146947 = PLANE('',#146948); +#146948 = AXIS2_PLACEMENT_3D('',#146949,#146950,#146951); +#146949 = CARTESIAN_POINT('',(9.357852435397E-02,-2.44893617034,-11.2)); +#146950 = DIRECTION('',(-1.,0.,0.)); +#146951 = DIRECTION('',(0.,0.,1.)); +#146952 = ADVANCED_FACE('',(#146953),#146969,.T.); +#146953 = FACE_BOUND('',#146954,.T.); +#146954 = EDGE_LOOP('',(#146955,#146961,#146962,#146968)); +#146955 = ORIENTED_EDGE('',*,*,#146956,.T.); +#146956 = EDGE_CURVE('',#137934,#136988,#146957,.T.); +#146957 = LINE('',#146958,#146959); +#146958 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.2)); +#146959 = VECTOR('',#146960,1.); +#146960 = DIRECTION('',(0.,0.,-1.)); +#146961 = ORIENTED_EDGE('',*,*,#137093,.F.); +#146962 = ORIENTED_EDGE('',*,*,#146963,.F.); +#146963 = EDGE_CURVE('',#137838,#137086,#146964,.T.); +#146964 = LINE('',#146965,#146966); +#146965 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.2)); +#146966 = VECTOR('',#146967,1.); +#146967 = DIRECTION('',(1.665334536938E-14,0.,-1.)); +#146968 = ORIENTED_EDGE('',*,*,#137941,.T.); +#146969 = PLANE('',#146970); +#146970 = AXIS2_PLACEMENT_3D('',#146971,#146972,#146973); +#146971 = CARTESIAN_POINT('',(-0.423088174102,-2.1,-11.2)); +#146972 = DIRECTION('',(-0.,1.,0.)); +#146973 = DIRECTION('',(1.,0.,0.)); +#146974 = ADVANCED_FACE('',(#146975),#146986,.T.); +#146975 = FACE_BOUND('',#146976,.T.); +#146976 = EDGE_LOOP('',(#146977,#146978,#146979,#146985)); +#146977 = ORIENTED_EDGE('',*,*,#146963,.T.); +#146978 = ORIENTED_EDGE('',*,*,#137085,.F.); +#146979 = ORIENTED_EDGE('',*,*,#146980,.F.); +#146980 = EDGE_CURVE('',#137836,#137078,#146981,.T.); +#146981 = LINE('',#146982,#146983); +#146982 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.2)); +#146983 = VECTOR('',#146984,1.); +#146984 = DIRECTION('',(1.387778780781E-14,0.,-1.)); +#146985 = ORIENTED_EDGE('',*,*,#137835,.T.); +#146986 = PLANE('',#146987); +#146987 = AXIS2_PLACEMENT_3D('',#146988,#146989,#146990); +#146988 = CARTESIAN_POINT('',(-0.464754872558,-2.108510637283,-11.2)); +#146989 = DIRECTION('',(-0.200123208493,0.979770739215,0.)); +#146990 = DIRECTION('',(0.,0.,1.)); +#146991 = ADVANCED_FACE('',(#146992),#147003,.T.); +#146992 = FACE_BOUND('',#146993,.T.); +#146993 = EDGE_LOOP('',(#146994,#146995,#146996,#147002)); +#146994 = ORIENTED_EDGE('',*,*,#146980,.T.); +#146995 = ORIENTED_EDGE('',*,*,#137077,.F.); +#146996 = ORIENTED_EDGE('',*,*,#146997,.F.); +#146997 = EDGE_CURVE('',#137846,#137070,#146998,.T.); +#146998 = LINE('',#146999,#147000); +#146999 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.2)); +#147000 = VECTOR('',#147001,1.); +#147001 = DIRECTION('',(0.,0.,-1.)); +#147002 = ORIENTED_EDGE('',*,*,#137845,.T.); +#147003 = PLANE('',#147004); +#147004 = AXIS2_PLACEMENT_3D('',#147005,#147006,#147007); +#147005 = CARTESIAN_POINT('',(-0.498088174102,-2.12553191185,-11.2)); +#147006 = DIRECTION('',(-0.454777457556,0.890605111202,0.)); +#147007 = DIRECTION('',(0.,0.,1.)); +#147008 = ADVANCED_FACE('',(#147009),#147020,.T.); +#147009 = FACE_BOUND('',#147010,.T.); +#147010 = EDGE_LOOP('',(#147011,#147012,#147013,#147019)); +#147011 = ORIENTED_EDGE('',*,*,#146997,.T.); +#147012 = ORIENTED_EDGE('',*,*,#137069,.F.); +#147013 = ORIENTED_EDGE('',*,*,#147014,.F.); +#147014 = EDGE_CURVE('',#137854,#137062,#147015,.T.); +#147015 = LINE('',#147016,#147017); +#147016 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.2)); +#147017 = VECTOR('',#147018,1.); +#147018 = DIRECTION('',(-1.665334536938E-14,0.,-1.)); +#147019 = ORIENTED_EDGE('',*,*,#137853,.T.); +#147020 = PLANE('',#147021); +#147021 = AXIS2_PLACEMENT_3D('',#147022,#147023,#147024); +#147022 = CARTESIAN_POINT('',(-0.531421475646,-2.159574460983,-11.2)); +#147023 = DIRECTION('',(-0.714510718335,0.699624494557,0.)); +#147024 = DIRECTION('',(0.,0.,1.)); +#147025 = ADVANCED_FACE('',(#147026),#147037,.T.); +#147026 = FACE_BOUND('',#147027,.T.); +#147027 = EDGE_LOOP('',(#147028,#147029,#147030,#147036)); +#147028 = ORIENTED_EDGE('',*,*,#147014,.T.); +#147029 = ORIENTED_EDGE('',*,*,#137061,.F.); +#147030 = ORIENTED_EDGE('',*,*,#147031,.F.); +#147031 = EDGE_CURVE('',#137862,#137054,#147032,.T.); +#147032 = LINE('',#147033,#147034); +#147033 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.2)); +#147034 = VECTOR('',#147035,1.); +#147035 = DIRECTION('',(0.,0.,-1.)); +#147036 = ORIENTED_EDGE('',*,*,#137861,.T.); +#147037 = PLANE('',#147038); +#147038 = AXIS2_PLACEMENT_3D('',#147039,#147040,#147041); +#147039 = CARTESIAN_POINT('',(-0.548088174102,-2.193617010117,-11.2)); +#147040 = DIRECTION('',(-0.898137765954,0.439714172353,0.)); +#147041 = DIRECTION('',(0.,0.,1.)); +#147042 = ADVANCED_FACE('',(#147043),#147054,.T.); +#147043 = FACE_BOUND('',#147044,.T.); +#147044 = EDGE_LOOP('',(#147045,#147046,#147047,#147053)); +#147045 = ORIENTED_EDGE('',*,*,#147031,.T.); +#147046 = ORIENTED_EDGE('',*,*,#137053,.F.); +#147047 = ORIENTED_EDGE('',*,*,#147048,.F.); +#147048 = EDGE_CURVE('',#137870,#137046,#147049,.T.); +#147049 = LINE('',#147050,#147051); +#147050 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.2)); +#147051 = VECTOR('',#147052,1.); +#147052 = DIRECTION('',(-1.110223024625E-14,-8.881784197001E-14,-1.)); +#147053 = ORIENTED_EDGE('',*,*,#137869,.T.); +#147054 = PLANE('',#147055); +#147055 = AXIS2_PLACEMENT_3D('',#147056,#147057,#147058); +#147056 = CARTESIAN_POINT('',(-0.556421475646,-2.236170220375,-11.2)); +#147057 = DIRECTION('',(-0.981359293067,0.192182043673,0.)); +#147058 = DIRECTION('',(0.,0.,1.)); +#147059 = ADVANCED_FACE('',(#147060),#147071,.T.); +#147060 = FACE_BOUND('',#147061,.T.); +#147061 = EDGE_LOOP('',(#147062,#147063,#147064,#147070)); +#147062 = ORIENTED_EDGE('',*,*,#147048,.T.); +#147063 = ORIENTED_EDGE('',*,*,#137045,.F.); +#147064 = ORIENTED_EDGE('',*,*,#147065,.F.); +#147065 = EDGE_CURVE('',#137878,#137038,#147066,.T.); +#147066 = LINE('',#147067,#147068); +#147067 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.2)); +#147068 = VECTOR('',#147069,1.); +#147069 = DIRECTION('',(-1.110223024625E-14,4.440892098501E-14,-1.)); +#147070 = ORIENTED_EDGE('',*,*,#137877,.T.); +#147071 = PLANE('',#147072); +#147072 = AXIS2_PLACEMENT_3D('',#147073,#147074,#147075); +#147073 = CARTESIAN_POINT('',(-0.556421475646,-2.363829791546,-11.2)); +#147074 = DIRECTION('',(-1.,0.,0.)); +#147075 = DIRECTION('',(0.,0.,1.)); +#147076 = ADVANCED_FACE('',(#147077),#147088,.T.); +#147077 = FACE_BOUND('',#147078,.T.); +#147078 = EDGE_LOOP('',(#147079,#147080,#147081,#147087)); +#147079 = ORIENTED_EDGE('',*,*,#147065,.T.); +#147080 = ORIENTED_EDGE('',*,*,#137037,.F.); +#147081 = ORIENTED_EDGE('',*,*,#147082,.F.); +#147082 = EDGE_CURVE('',#137886,#137030,#147083,.T.); +#147083 = LINE('',#147084,#147085); +#147084 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.2)); +#147085 = VECTOR('',#147086,1.); +#147086 = DIRECTION('',(0.,2.22044604925E-14,-1.)); +#147087 = ORIENTED_EDGE('',*,*,#137885,.T.); +#147088 = PLANE('',#147089); +#147089 = AXIS2_PLACEMENT_3D('',#147090,#147091,#147092); +#147090 = CARTESIAN_POINT('',(-0.548088174102,-2.406382977962,-11.2)); +#147091 = DIRECTION('',(-0.98135927276,-0.192182147373,0.)); +#147092 = DIRECTION('',(-0.192182147373,0.98135927276,0.)); +#147093 = ADVANCED_FACE('',(#147094),#147105,.T.); +#147094 = FACE_BOUND('',#147095,.T.); +#147095 = EDGE_LOOP('',(#147096,#147097,#147098,#147104)); +#147096 = ORIENTED_EDGE('',*,*,#147082,.T.); +#147097 = ORIENTED_EDGE('',*,*,#137029,.F.); +#147098 = ORIENTED_EDGE('',*,*,#147099,.F.); +#147099 = EDGE_CURVE('',#137894,#137022,#147100,.T.); +#147100 = LINE('',#147101,#147102); +#147101 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.2)); +#147102 = VECTOR('',#147103,1.); +#147103 = DIRECTION('',(1.110223024625E-14,-2.22044604925E-14,-1.)); +#147104 = ORIENTED_EDGE('',*,*,#137893,.T.); +#147105 = PLANE('',#147106); +#147106 = AXIS2_PLACEMENT_3D('',#147107,#147108,#147109); +#147107 = CARTESIAN_POINT('',(-0.531421475646,-2.440425533056,-11.2)); +#147108 = DIRECTION('',(-0.898137796358,-0.439714110249,0.)); +#147109 = DIRECTION('',(-0.439714110249,0.898137796358,0.)); +#147110 = ADVANCED_FACE('',(#147111),#147122,.T.); +#147111 = FACE_BOUND('',#147112,.T.); +#147112 = EDGE_LOOP('',(#147113,#147114,#147115,#147121)); +#147113 = ORIENTED_EDGE('',*,*,#147099,.T.); +#147114 = ORIENTED_EDGE('',*,*,#137021,.F.); +#147115 = ORIENTED_EDGE('',*,*,#147116,.F.); +#147116 = EDGE_CURVE('',#137902,#137014,#147117,.T.); +#147117 = LINE('',#147118,#147119); +#147118 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.2)); +#147119 = VECTOR('',#147120,1.); +#147120 = DIRECTION('',(-1.665334536938E-14,0.,-1.)); +#147121 = ORIENTED_EDGE('',*,*,#137901,.T.); +#147122 = PLANE('',#147123); +#147123 = AXIS2_PLACEMENT_3D('',#147124,#147125,#147126); +#147124 = CARTESIAN_POINT('',(-0.498088174102,-2.47446808517,-11.2)); +#147125 = DIRECTION('',(-0.714510748952,-0.699624463288,0.)); +#147126 = DIRECTION('',(-0.699624463288,0.714510748952,0.)); +#147127 = ADVANCED_FACE('',(#147128),#147139,.T.); +#147128 = FACE_BOUND('',#147129,.T.); +#147129 = EDGE_LOOP('',(#147130,#147131,#147132,#147138)); +#147130 = ORIENTED_EDGE('',*,*,#147116,.T.); +#147131 = ORIENTED_EDGE('',*,*,#137013,.F.); +#147132 = ORIENTED_EDGE('',*,*,#147133,.F.); +#147133 = EDGE_CURVE('',#137910,#137006,#147134,.T.); +#147134 = LINE('',#147135,#147136); +#147135 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.2)); +#147136 = VECTOR('',#147137,1.); +#147137 = DIRECTION('',(0.,0.,-1.)); +#147138 = ORIENTED_EDGE('',*,*,#137909,.T.); +#147139 = PLANE('',#147140); +#147140 = AXIS2_PLACEMENT_3D('',#147141,#147142,#147143); +#147141 = CARTESIAN_POINT('',(-0.464754872558,-2.491489361972,-11.2)); +#147142 = DIRECTION('',(-0.454777504925,-0.890605087014,0.)); +#147143 = DIRECTION('',(-0.890605087014,0.454777504925,0.)); +#147144 = ADVANCED_FACE('',(#147145),#147156,.T.); +#147145 = FACE_BOUND('',#147146,.T.); +#147146 = EDGE_LOOP('',(#147147,#147148,#147149,#147155)); +#147147 = ORIENTED_EDGE('',*,*,#147133,.T.); +#147148 = ORIENTED_EDGE('',*,*,#137005,.F.); +#147149 = ORIENTED_EDGE('',*,*,#147150,.F.); +#147150 = EDGE_CURVE('',#137918,#136998,#147151,.T.); +#147151 = LINE('',#147152,#147153); +#147152 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.2)); +#147153 = VECTOR('',#147154,1.); +#147154 = DIRECTION('',(1.665334536938E-14,0.,-1.)); +#147155 = ORIENTED_EDGE('',*,*,#137917,.T.); +#147156 = PLANE('',#147157); +#147157 = AXIS2_PLACEMENT_3D('',#147158,#147159,#147160); +#147158 = CARTESIAN_POINT('',(-0.423088174102,-2.5,-11.2)); +#147159 = DIRECTION('',(-0.200123225311,-0.97977073578,0.)); +#147160 = DIRECTION('',(-0.97977073578,0.200123225311,0.)); +#147161 = ADVANCED_FACE('',(#147162),#147173,.T.); +#147162 = FACE_BOUND('',#147163,.T.); +#147163 = EDGE_LOOP('',(#147164,#147165,#147166,#147172)); +#147164 = ORIENTED_EDGE('',*,*,#147150,.T.); +#147165 = ORIENTED_EDGE('',*,*,#136997,.F.); +#147166 = ORIENTED_EDGE('',*,*,#147167,.F.); +#147167 = EDGE_CURVE('',#137926,#136990,#147168,.T.); +#147168 = LINE('',#147169,#147170); +#147169 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.2)); +#147170 = VECTOR('',#147171,1.); +#147171 = DIRECTION('',(0.,0.,-1.)); +#147172 = ORIENTED_EDGE('',*,*,#137925,.T.); +#147173 = PLANE('',#147174); +#147174 = AXIS2_PLACEMENT_3D('',#147175,#147176,#147177); +#147175 = CARTESIAN_POINT('',(-0.223088174102,-2.5,-11.2)); +#147176 = DIRECTION('',(0.,-1.,0.)); +#147177 = DIRECTION('',(0.,0.,-1.)); +#147178 = ADVANCED_FACE('',(#147179),#147185,.T.); +#147179 = FACE_BOUND('',#147180,.T.); +#147180 = EDGE_LOOP('',(#147181,#147182,#147183,#147184)); +#147181 = ORIENTED_EDGE('',*,*,#147167,.T.); +#147182 = ORIENTED_EDGE('',*,*,#136987,.F.); +#147183 = ORIENTED_EDGE('',*,*,#146956,.F.); +#147184 = ORIENTED_EDGE('',*,*,#137933,.T.); +#147185 = PLANE('',#147186); +#147186 = AXIS2_PLACEMENT_3D('',#147187,#147188,#147189); +#147187 = CARTESIAN_POINT('',(-0.223088174102,-2.1,-11.2)); +#147188 = DIRECTION('',(1.,0.,0.)); +#147189 = DIRECTION('',(-0.,1.,0.)); +#147190 = ADVANCED_FACE('',(#147191),#147207,.T.); +#147191 = FACE_BOUND('',#147192,.T.); +#147192 = EDGE_LOOP('',(#147193,#147199,#147200,#147206)); +#147193 = ORIENTED_EDGE('',*,*,#147194,.T.); +#147194 = EDGE_CURVE('',#138699,#137102,#147195,.T.); +#147195 = LINE('',#147196,#147197); +#147196 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.2)); +#147197 = VECTOR('',#147198,1.); +#147198 = DIRECTION('',(0.,0.,-1.)); +#147199 = ORIENTED_EDGE('',*,*,#137191,.F.); +#147200 = ORIENTED_EDGE('',*,*,#147201,.F.); +#147201 = EDGE_CURVE('',#138619,#137184,#147202,.T.); +#147202 = LINE('',#147203,#147204); +#147203 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.2)); +#147204 = VECTOR('',#147205,1.); +#147205 = DIRECTION('',(0.,0.,-1.)); +#147206 = ORIENTED_EDGE('',*,*,#138706,.T.); +#147207 = PLANE('',#147208); +#147208 = AXIS2_PLACEMENT_3D('',#147209,#147210,#147211); +#147209 = CARTESIAN_POINT('',(-0.273088174102,-2.1510638237,-11.2)); +#147210 = DIRECTION('',(0.,-1.,0.)); +#147211 = DIRECTION('',(0.,0.,-1.)); +#147212 = ADVANCED_FACE('',(#147213),#147224,.T.); +#147213 = FACE_BOUND('',#147214,.T.); +#147214 = EDGE_LOOP('',(#147215,#147216,#147217,#147223)); +#147215 = ORIENTED_EDGE('',*,*,#147201,.T.); +#147216 = ORIENTED_EDGE('',*,*,#137183,.F.); +#147217 = ORIENTED_EDGE('',*,*,#147218,.F.); +#147218 = EDGE_CURVE('',#138617,#137176,#147219,.T.); +#147219 = LINE('',#147220,#147221); +#147220 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.2)); +#147221 = VECTOR('',#147222,1.); +#147222 = DIRECTION('',(0.,0.,-1.)); +#147223 = ORIENTED_EDGE('',*,*,#138616,.T.); +#147224 = PLANE('',#147225); +#147225 = AXIS2_PLACEMENT_3D('',#147226,#147227,#147228); +#147226 = CARTESIAN_POINT('',(-0.273088174102,-2.44893617034,-11.2)); +#147227 = DIRECTION('',(-1.,0.,0.)); +#147228 = DIRECTION('',(0.,0.,1.)); +#147229 = ADVANCED_FACE('',(#147230),#147241,.T.); +#147230 = FACE_BOUND('',#147231,.T.); +#147231 = EDGE_LOOP('',(#147232,#147233,#147234,#147240)); +#147232 = ORIENTED_EDGE('',*,*,#147218,.T.); +#147233 = ORIENTED_EDGE('',*,*,#137175,.F.); +#147234 = ORIENTED_EDGE('',*,*,#147235,.F.); +#147235 = EDGE_CURVE('',#138627,#137168,#147236,.T.); +#147236 = LINE('',#147237,#147238); +#147237 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.2)); +#147238 = VECTOR('',#147239,1.); +#147239 = DIRECTION('',(1.665334536938E-14,0.,-1.)); +#147240 = ORIENTED_EDGE('',*,*,#138626,.T.); +#147241 = PLANE('',#147242); +#147242 = AXIS2_PLACEMENT_3D('',#147243,#147244,#147245); +#147243 = CARTESIAN_POINT('',(-0.423088174102,-2.44893617034,-11.2)); +#147244 = DIRECTION('',(-0.,1.,0.)); +#147245 = DIRECTION('',(1.,0.,0.)); +#147246 = ADVANCED_FACE('',(#147247),#147258,.T.); +#147247 = FACE_BOUND('',#147248,.T.); +#147248 = EDGE_LOOP('',(#147249,#147250,#147251,#147257)); +#147249 = ORIENTED_EDGE('',*,*,#147235,.T.); +#147250 = ORIENTED_EDGE('',*,*,#137167,.F.); +#147251 = ORIENTED_EDGE('',*,*,#147252,.F.); +#147252 = EDGE_CURVE('',#138635,#137160,#147253,.T.); +#147253 = LINE('',#147254,#147255); +#147254 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.2)); +#147255 = VECTOR('',#147256,1.); +#147256 = DIRECTION('',(-1.387778780781E-14,0.,-1.)); +#147257 = ORIENTED_EDGE('',*,*,#138634,.T.); +#147258 = PLANE('',#147259); +#147259 = AXIS2_PLACEMENT_3D('',#147260,#147261,#147262); +#147260 = CARTESIAN_POINT('',(-0.456421475646,-2.440425533056,-11.2)); +#147261 = DIRECTION('',(0.247383439065,0.968917661144,0.)); +#147262 = DIRECTION('',(0.,0.,-1.)); +#147263 = ADVANCED_FACE('',(#147264),#147275,.T.); +#147264 = FACE_BOUND('',#147265,.T.); +#147265 = EDGE_LOOP('',(#147266,#147267,#147268,#147274)); +#147266 = ORIENTED_EDGE('',*,*,#147252,.T.); +#147267 = ORIENTED_EDGE('',*,*,#137159,.F.); +#147268 = ORIENTED_EDGE('',*,*,#147269,.F.); +#147269 = EDGE_CURVE('',#138643,#137152,#147270,.T.); +#147270 = LINE('',#147271,#147272); +#147271 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.2)); +#147272 = VECTOR('',#147273,1.); +#147273 = DIRECTION('',(1.387778780781E-14,0.,-1.)); +#147274 = ORIENTED_EDGE('',*,*,#138642,.T.); +#147275 = PLANE('',#147276); +#147276 = AXIS2_PLACEMENT_3D('',#147277,#147278,#147279); +#147277 = CARTESIAN_POINT('',(-0.481421475646,-2.423404252529,-11.2)); +#147278 = DIRECTION('',(0.562791065897,0.826599187119,0.)); +#147279 = DIRECTION('',(0.,0.,-1.)); +#147280 = ADVANCED_FACE('',(#147281),#147292,.T.); +#147281 = FACE_BOUND('',#147282,.T.); +#147282 = EDGE_LOOP('',(#147283,#147284,#147285,#147291)); +#147283 = ORIENTED_EDGE('',*,*,#147269,.T.); +#147284 = ORIENTED_EDGE('',*,*,#137151,.F.); +#147285 = ORIENTED_EDGE('',*,*,#147286,.F.); +#147286 = EDGE_CURVE('',#138651,#137144,#147287,.T.); +#147287 = LINE('',#147288,#147289); +#147288 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.2)); +#147289 = VECTOR('',#147290,1.); +#147290 = DIRECTION('',(0.,2.22044604925E-14,-1.)); +#147291 = ORIENTED_EDGE('',*,*,#138650,.T.); +#147292 = PLANE('',#147293); +#147293 = AXIS2_PLACEMENT_3D('',#147294,#147295,#147296); +#147294 = CARTESIAN_POINT('',(-0.498088174102,-2.397872340679,-11.2)); +#147295 = DIRECTION('',(0.837378643312,0.546623277701,0.)); +#147296 = DIRECTION('',(0.,0.,-1.)); +#147297 = ADVANCED_FACE('',(#147298),#147309,.T.); +#147298 = FACE_BOUND('',#147299,.T.); +#147299 = EDGE_LOOP('',(#147300,#147301,#147302,#147308)); +#147300 = ORIENTED_EDGE('',*,*,#147286,.T.); +#147301 = ORIENTED_EDGE('',*,*,#137143,.F.); +#147302 = ORIENTED_EDGE('',*,*,#147303,.F.); +#147303 = EDGE_CURVE('',#138659,#137136,#147304,.T.); +#147304 = LINE('',#147305,#147306); +#147305 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.2)); +#147306 = VECTOR('',#147307,1.); +#147307 = DIRECTION('',(0.,0.,-1.)); +#147308 = ORIENTED_EDGE('',*,*,#138658,.T.); +#147309 = PLANE('',#147310); +#147310 = AXIS2_PLACEMENT_3D('',#147311,#147312,#147313); +#147311 = CARTESIAN_POINT('',(-0.506421475646,-2.363829791546,-11.2)); +#147312 = DIRECTION('',(0.971321363344,0.237770496721,0.)); +#147313 = DIRECTION('',(0.,0.,-1.)); +#147314 = ADVANCED_FACE('',(#147315),#147326,.T.); +#147315 = FACE_BOUND('',#147316,.T.); +#147316 = EDGE_LOOP('',(#147317,#147318,#147319,#147325)); +#147317 = ORIENTED_EDGE('',*,*,#147303,.T.); +#147318 = ORIENTED_EDGE('',*,*,#137135,.F.); +#147319 = ORIENTED_EDGE('',*,*,#147320,.F.); +#147320 = EDGE_CURVE('',#138667,#137128,#147321,.T.); +#147321 = LINE('',#147322,#147323); +#147322 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.2)); +#147323 = VECTOR('',#147324,1.); +#147324 = DIRECTION('',(0.,0.,-1.)); +#147325 = ORIENTED_EDGE('',*,*,#138666,.T.); +#147326 = PLANE('',#147327); +#147327 = AXIS2_PLACEMENT_3D('',#147328,#147329,#147330); +#147328 = CARTESIAN_POINT('',(-0.506421475646,-2.236170220375,-11.2)); +#147329 = DIRECTION('',(1.,0.,0.)); +#147330 = DIRECTION('',(-0.,1.,0.)); +#147331 = ADVANCED_FACE('',(#147332),#147343,.T.); +#147332 = FACE_BOUND('',#147333,.T.); +#147333 = EDGE_LOOP('',(#147334,#147335,#147336,#147342)); +#147334 = ORIENTED_EDGE('',*,*,#147320,.T.); +#147335 = ORIENTED_EDGE('',*,*,#137127,.F.); +#147336 = ORIENTED_EDGE('',*,*,#147337,.F.); +#147337 = EDGE_CURVE('',#138675,#137120,#147338,.T.); +#147338 = LINE('',#147339,#147340); +#147339 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.2)); +#147340 = VECTOR('',#147341,1.); +#147341 = DIRECTION('',(0.,-2.22044604925E-14,-1.)); +#147342 = ORIENTED_EDGE('',*,*,#138674,.T.); +#147343 = PLANE('',#147344); +#147344 = AXIS2_PLACEMENT_3D('',#147345,#147346,#147347); +#147345 = CARTESIAN_POINT('',(-0.498088174102,-2.202127671242,-11.2)); +#147346 = DIRECTION('',(0.971321363344,-0.237770496721,0.)); +#147347 = DIRECTION('',(0.,0.,-1.)); +#147348 = ADVANCED_FACE('',(#147349),#147360,.T.); +#147349 = FACE_BOUND('',#147350,.T.); +#147350 = EDGE_LOOP('',(#147351,#147352,#147353,#147359)); +#147351 = ORIENTED_EDGE('',*,*,#147337,.T.); +#147352 = ORIENTED_EDGE('',*,*,#137119,.F.); +#147353 = ORIENTED_EDGE('',*,*,#147354,.F.); +#147354 = EDGE_CURVE('',#138683,#137112,#147355,.T.); +#147355 = LINE('',#147356,#147357); +#147356 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.2)); +#147357 = VECTOR('',#147358,1.); +#147358 = DIRECTION('',(0.,0.,-1.)); +#147359 = ORIENTED_EDGE('',*,*,#138682,.T.); +#147360 = PLANE('',#147361); +#147361 = AXIS2_PLACEMENT_3D('',#147362,#147363,#147364); +#147362 = CARTESIAN_POINT('',(-0.481421475646,-2.17659573555,-11.2)); +#147363 = DIRECTION('',(0.837378876956,-0.546622919779,0.)); +#147364 = DIRECTION('',(0.,0.,-1.)); +#147365 = ADVANCED_FACE('',(#147366),#147377,.T.); +#147366 = FACE_BOUND('',#147367,.T.); +#147367 = EDGE_LOOP('',(#147368,#147369,#147370,#147376)); +#147368 = ORIENTED_EDGE('',*,*,#147354,.T.); +#147369 = ORIENTED_EDGE('',*,*,#137111,.F.); +#147370 = ORIENTED_EDGE('',*,*,#147371,.F.); +#147371 = EDGE_CURVE('',#138691,#137104,#147372,.T.); +#147372 = LINE('',#147373,#147374); +#147373 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.2)); +#147374 = VECTOR('',#147375,1.); +#147375 = DIRECTION('',(0.,0.,-1.)); +#147376 = ORIENTED_EDGE('',*,*,#138690,.T.); +#147377 = PLANE('',#147378); +#147378 = AXIS2_PLACEMENT_3D('',#147379,#147380,#147381); +#147379 = CARTESIAN_POINT('',(-0.456421475646,-2.159574460983,-11.2)); +#147380 = DIRECTION('',(0.562790931242,-0.8265992788,0.)); +#147381 = DIRECTION('',(0.,0.,-1.)); +#147382 = ADVANCED_FACE('',(#147383),#147389,.T.); +#147383 = FACE_BOUND('',#147384,.T.); +#147384 = EDGE_LOOP('',(#147385,#147386,#147387,#147388)); +#147385 = ORIENTED_EDGE('',*,*,#147371,.T.); +#147386 = ORIENTED_EDGE('',*,*,#137101,.F.); +#147387 = ORIENTED_EDGE('',*,*,#147194,.F.); +#147388 = ORIENTED_EDGE('',*,*,#138698,.T.); +#147389 = PLANE('',#147390); +#147390 = AXIS2_PLACEMENT_3D('',#147391,#147392,#147393); +#147391 = CARTESIAN_POINT('',(-0.423088174102,-2.1510638237,-11.2)); +#147392 = DIRECTION('',(0.247383439065,-0.968917661144,0.)); +#147393 = DIRECTION('',(0.,0.,-1.)); +#147394 = ADVANCED_FACE('',(#147395),#147411,.T.); +#147395 = FACE_BOUND('',#147396,.T.); +#147396 = EDGE_LOOP('',(#147397,#147403,#147404,#147410)); +#147397 = ORIENTED_EDGE('',*,*,#147398,.T.); +#147398 = EDGE_CURVE('',#138000,#137206,#147399,.T.); +#147399 = LINE('',#147400,#147401); +#147400 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.2)); +#147401 = VECTOR('',#147402,1.); +#147402 = DIRECTION('',(0.,0.,-1.)); +#147403 = ORIENTED_EDGE('',*,*,#137263,.F.); +#147404 = ORIENTED_EDGE('',*,*,#147405,.F.); +#147405 = EDGE_CURVE('',#137952,#137256,#147406,.T.); +#147406 = LINE('',#147407,#147408); +#147407 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.2)); +#147408 = VECTOR('',#147409,1.); +#147409 = DIRECTION('',(0.,0.,-1.)); +#147410 = ORIENTED_EDGE('',*,*,#138007,.T.); +#147411 = PLANE('',#147412); +#147412 = AXIS2_PLACEMENT_3D('',#147413,#147414,#147415); +#147413 = CARTESIAN_POINT('',(-0.823088174102,-2.1,-11.2)); +#147414 = DIRECTION('',(-0.,1.,0.)); +#147415 = DIRECTION('',(1.,0.,0.)); +#147416 = ADVANCED_FACE('',(#147417),#147428,.T.); +#147417 = FACE_BOUND('',#147418,.T.); +#147418 = EDGE_LOOP('',(#147419,#147420,#147421,#147427)); +#147419 = ORIENTED_EDGE('',*,*,#147405,.T.); +#147420 = ORIENTED_EDGE('',*,*,#137255,.F.); +#147421 = ORIENTED_EDGE('',*,*,#147422,.F.); +#147422 = EDGE_CURVE('',#137950,#137248,#147423,.T.); +#147423 = LINE('',#147424,#147425); +#147424 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.2)); +#147425 = VECTOR('',#147426,1.); +#147426 = DIRECTION('',(-1.665334536938E-14,0.,-1.)); +#147427 = ORIENTED_EDGE('',*,*,#137949,.T.); +#147428 = PLANE('',#147429); +#147429 = AXIS2_PLACEMENT_3D('',#147430,#147431,#147432); +#147430 = CARTESIAN_POINT('',(-0.956421571014,-2.5,-11.2)); +#147431 = DIRECTION('',(-0.948683252814,0.316227901727,0.)); +#147432 = DIRECTION('',(0.,0.,1.)); +#147433 = ADVANCED_FACE('',(#147434),#147445,.T.); +#147434 = FACE_BOUND('',#147435,.T.); +#147435 = EDGE_LOOP('',(#147436,#147437,#147438,#147444)); +#147436 = ORIENTED_EDGE('',*,*,#147422,.T.); +#147437 = ORIENTED_EDGE('',*,*,#137247,.F.); +#147438 = ORIENTED_EDGE('',*,*,#147439,.F.); +#147439 = EDGE_CURVE('',#137960,#137240,#147440,.T.); +#147440 = LINE('',#147441,#147442); +#147441 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.2)); +#147442 = VECTOR('',#147443,1.); +#147443 = DIRECTION('',(0.,0.,-1.)); +#147444 = ORIENTED_EDGE('',*,*,#137959,.T.); +#147445 = PLANE('',#147446); +#147446 = AXIS2_PLACEMENT_3D('',#147447,#147448,#147449); +#147447 = CARTESIAN_POINT('',(-0.906421571014,-2.5,-11.2)); +#147448 = DIRECTION('',(0.,-1.,0.)); +#147449 = DIRECTION('',(0.,0.,-1.)); +#147450 = ADVANCED_FACE('',(#147451),#147462,.T.); +#147451 = FACE_BOUND('',#147452,.T.); +#147452 = EDGE_LOOP('',(#147453,#147454,#147455,#147461)); +#147453 = ORIENTED_EDGE('',*,*,#147439,.T.); +#147454 = ORIENTED_EDGE('',*,*,#137239,.F.); +#147455 = ORIENTED_EDGE('',*,*,#147456,.F.); +#147456 = EDGE_CURVE('',#137968,#137232,#147457,.T.); +#147457 = LINE('',#147458,#147459); +#147458 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.2)); +#147459 = VECTOR('',#147460,1.); +#147460 = DIRECTION('',(0.,0.,-1.)); +#147461 = ORIENTED_EDGE('',*,*,#137967,.T.); +#147462 = PLANE('',#147463); +#147463 = AXIS2_PLACEMENT_3D('',#147464,#147465,#147466); +#147464 = CARTESIAN_POINT('',(-0.873088174102,-2.397872340679,-11.2)); +#147465 = DIRECTION('',(0.950645028229,-0.310280567074,0.)); +#147466 = DIRECTION('',(0.,0.,-1.)); +#147467 = ADVANCED_FACE('',(#147468),#147479,.T.); +#147468 = FACE_BOUND('',#147469,.T.); +#147469 = EDGE_LOOP('',(#147470,#147471,#147472,#147478)); +#147470 = ORIENTED_EDGE('',*,*,#147456,.T.); +#147471 = ORIENTED_EDGE('',*,*,#137231,.F.); +#147472 = ORIENTED_EDGE('',*,*,#147473,.F.); +#147473 = EDGE_CURVE('',#137976,#137224,#147474,.T.); +#147474 = LINE('',#147475,#147476); +#147475 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.2)); +#147476 = VECTOR('',#147477,1.); +#147477 = DIRECTION('',(-1.110223024625E-14,0.,-1.)); +#147478 = ORIENTED_EDGE('',*,*,#137975,.T.); +#147479 = PLANE('',#147480); +#147480 = AXIS2_PLACEMENT_3D('',#147481,#147482,#147483); +#147481 = CARTESIAN_POINT('',(-0.706421571014,-2.397872340679,-11.2)); +#147482 = DIRECTION('',(0.,-1.,0.)); +#147483 = DIRECTION('',(0.,0.,-1.)); +#147484 = ADVANCED_FACE('',(#147485),#147496,.T.); +#147485 = FACE_BOUND('',#147486,.T.); +#147486 = EDGE_LOOP('',(#147487,#147488,#147489,#147495)); +#147487 = ORIENTED_EDGE('',*,*,#147473,.T.); +#147488 = ORIENTED_EDGE('',*,*,#137223,.F.); +#147489 = ORIENTED_EDGE('',*,*,#147490,.F.); +#147490 = EDGE_CURVE('',#137984,#137216,#147491,.T.); +#147491 = LINE('',#147492,#147493); +#147492 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.2)); +#147493 = VECTOR('',#147494,1.); +#147494 = DIRECTION('',(0.,0.,-1.)); +#147495 = ORIENTED_EDGE('',*,*,#137983,.T.); +#147496 = PLANE('',#147497); +#147497 = AXIS2_PLACEMENT_3D('',#147498,#147499,#147500); +#147498 = CARTESIAN_POINT('',(-0.673088174102,-2.5,-11.2)); +#147499 = DIRECTION('',(-0.950645028229,-0.310280567074,0.)); +#147500 = DIRECTION('',(-0.310280567074,0.950645028229,0.)); +#147501 = ADVANCED_FACE('',(#147502),#147513,.T.); +#147502 = FACE_BOUND('',#147503,.T.); +#147503 = EDGE_LOOP('',(#147504,#147505,#147506,#147512)); +#147504 = ORIENTED_EDGE('',*,*,#147490,.T.); +#147505 = ORIENTED_EDGE('',*,*,#137215,.F.); +#147506 = ORIENTED_EDGE('',*,*,#147507,.F.); +#147507 = EDGE_CURVE('',#137992,#137208,#147508,.T.); +#147508 = LINE('',#147509,#147510); +#147509 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.2)); +#147510 = VECTOR('',#147511,1.); +#147511 = DIRECTION('',(0.,0.,-1.)); +#147512 = ORIENTED_EDGE('',*,*,#137991,.T.); +#147513 = PLANE('',#147514); +#147514 = AXIS2_PLACEMENT_3D('',#147515,#147516,#147517); +#147515 = CARTESIAN_POINT('',(-0.623088174102,-2.5,-11.2)); +#147516 = DIRECTION('',(0.,-1.,0.)); +#147517 = DIRECTION('',(0.,0.,-1.)); +#147518 = ADVANCED_FACE('',(#147519),#147525,.T.); +#147519 = FACE_BOUND('',#147520,.T.); +#147520 = EDGE_LOOP('',(#147521,#147522,#147523,#147524)); +#147521 = ORIENTED_EDGE('',*,*,#147507,.T.); +#147522 = ORIENTED_EDGE('',*,*,#137205,.F.); +#147523 = ORIENTED_EDGE('',*,*,#147398,.F.); +#147524 = ORIENTED_EDGE('',*,*,#137999,.T.); +#147525 = PLANE('',#147526); +#147526 = AXIS2_PLACEMENT_3D('',#147527,#147528,#147529); +#147527 = CARTESIAN_POINT('',(-0.756421571014,-2.1,-11.2)); +#147528 = DIRECTION('',(0.948683252814,0.316227901727,0.)); +#147529 = DIRECTION('',(0.,0.,-1.)); +#147530 = ADVANCED_FACE('',(#147531),#147547,.T.); +#147531 = FACE_BOUND('',#147532,.T.); +#147532 = EDGE_LOOP('',(#147533,#147539,#147540,#147546)); +#147533 = ORIENTED_EDGE('',*,*,#147534,.T.); +#147534 = EDGE_CURVE('',#138731,#137272,#147535,.T.); +#147535 = LINE('',#147536,#147537); +#147536 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.2)); +#147537 = VECTOR('',#147538,1.); +#147538 = DIRECTION('',(0.,0.,-1.)); +#147539 = ORIENTED_EDGE('',*,*,#137289,.F.); +#147540 = ORIENTED_EDGE('',*,*,#147541,.F.); +#147541 = EDGE_CURVE('',#138723,#137282,#147542,.T.); +#147542 = LINE('',#147543,#147544); +#147543 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.2)); +#147544 = VECTOR('',#147545,1.); +#147545 = DIRECTION('',(0.,2.22044604925E-14,-1.)); +#147546 = ORIENTED_EDGE('',*,*,#138738,.T.); +#147547 = PLANE('',#147548); +#147548 = AXIS2_PLACEMENT_3D('',#147549,#147550,#147551); +#147549 = CARTESIAN_POINT('',(-0.78975477719,-2.134042549133,-11.2)); +#147550 = DIRECTION('',(0.950645206355,-0.310280021328,0.)); +#147551 = DIRECTION('',(0.,0.,-1.)); +#147552 = ADVANCED_FACE('',(#147553),#147564,.T.); +#147553 = FACE_BOUND('',#147554,.T.); +#147554 = EDGE_LOOP('',(#147555,#147556,#147557,#147563)); +#147555 = ORIENTED_EDGE('',*,*,#147541,.T.); +#147556 = ORIENTED_EDGE('',*,*,#137281,.F.); +#147557 = ORIENTED_EDGE('',*,*,#147558,.F.); +#147558 = EDGE_CURVE('',#138721,#137274,#147559,.T.); +#147559 = LINE('',#147560,#147561); +#147560 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.2)); +#147561 = VECTOR('',#147562,1.); +#147562 = DIRECTION('',(-1.110223024625E-14,0.,-1.)); +#147563 = ORIENTED_EDGE('',*,*,#138720,.T.); +#147564 = PLANE('',#147565); +#147565 = AXIS2_PLACEMENT_3D('',#147566,#147567,#147568); +#147566 = CARTESIAN_POINT('',(-0.71475477719,-2.363829791546,-11.2)); +#147567 = DIRECTION('',(-0.950645206355,-0.310280021328,0.)); +#147568 = DIRECTION('',(-0.310280021328,0.950645206355,0.)); +#147569 = ADVANCED_FACE('',(#147570),#147576,.T.); +#147570 = FACE_BOUND('',#147571,.T.); +#147571 = EDGE_LOOP('',(#147572,#147573,#147574,#147575)); +#147572 = ORIENTED_EDGE('',*,*,#147558,.T.); +#147573 = ORIENTED_EDGE('',*,*,#137271,.F.); +#147574 = ORIENTED_EDGE('',*,*,#147534,.F.); +#147575 = ORIENTED_EDGE('',*,*,#138730,.T.); +#147576 = PLANE('',#147577); +#147577 = AXIS2_PLACEMENT_3D('',#147578,#147579,#147580); +#147578 = CARTESIAN_POINT('',(-0.86475477719,-2.363829791546,-11.2)); +#147579 = DIRECTION('',(-0.,1.,0.)); +#147580 = DIRECTION('',(1.,0.,0.)); +#147581 = MANIFOLD_SOLID_BREP('',#147582); +#147582 = CLOSED_SHELL('',(#147583,#147625,#147691,#147723,#147747, + #147772,#147813,#147825,#147842,#147859)); +#147583 = ADVANCED_FACE('',(#147584),#147620,.T.); +#147584 = FACE_BOUND('',#147585,.T.); +#147585 = EDGE_LOOP('',(#147586,#147596,#147605,#147613)); +#147586 = ORIENTED_EDGE('',*,*,#147587,.F.); +#147587 = EDGE_CURVE('',#147588,#147590,#147592,.T.); +#147588 = VERTEX_POINT('',#147589); +#147589 = CARTESIAN_POINT('',(0.45,-7.6989,-6.03)); +#147590 = VERTEX_POINT('',#147591); +#147591 = CARTESIAN_POINT('',(0.45,-9.1989,-6.03)); +#147592 = LINE('',#147593,#147594); +#147593 = CARTESIAN_POINT('',(0.45,-7.6989,-6.03)); +#147594 = VECTOR('',#147595,1.); +#147595 = DIRECTION('',(0.,-1.,0.)); +#147596 = ORIENTED_EDGE('',*,*,#147597,.F.); +#147597 = EDGE_CURVE('',#147598,#147588,#147600,.T.); +#147598 = VERTEX_POINT('',#147599); +#147599 = CARTESIAN_POINT('',(1.25,-7.6989,-5.23)); +#147600 = CIRCLE('',#147601,0.8); +#147601 = AXIS2_PLACEMENT_3D('',#147602,#147603,#147604); +#147602 = CARTESIAN_POINT('',(0.45,-7.6989,-5.23)); +#147603 = DIRECTION('',(-0.,1.,0.)); +#147604 = DIRECTION('',(1.,0.,0.)); +#147605 = ORIENTED_EDGE('',*,*,#147606,.T.); +#147606 = EDGE_CURVE('',#147598,#147607,#147609,.T.); +#147607 = VERTEX_POINT('',#147608); +#147608 = CARTESIAN_POINT('',(1.25,-9.1989,-5.23)); +#147609 = LINE('',#147610,#147611); +#147610 = CARTESIAN_POINT('',(1.25,-7.6989,-5.23)); +#147611 = VECTOR('',#147612,1.); +#147612 = DIRECTION('',(0.,-1.,0.)); +#147613 = ORIENTED_EDGE('',*,*,#147614,.F.); +#147614 = EDGE_CURVE('',#147590,#147607,#147615,.T.); +#147615 = CIRCLE('',#147616,0.8); +#147616 = AXIS2_PLACEMENT_3D('',#147617,#147618,#147619); +#147617 = CARTESIAN_POINT('',(0.45,-9.1989,-5.23)); +#147618 = DIRECTION('',(0.,-1.,0.)); +#147619 = DIRECTION('',(0.,0.,-1.)); +#147620 = CYLINDRICAL_SURFACE('',#147621,0.8); +#147621 = AXIS2_PLACEMENT_3D('',#147622,#147623,#147624); +#147622 = CARTESIAN_POINT('',(0.45,29.82987568644,-5.23)); +#147623 = DIRECTION('',(0.,-1.,0.)); +#147624 = DIRECTION('',(0.,0.,-1.)); +#147625 = ADVANCED_FACE('',(#147626),#147686,.T.); +#147626 = FACE_BOUND('',#147627,.T.); +#147627 = EDGE_LOOP('',(#147628,#147638,#147647,#147653,#147654,#147662, + #147671,#147679)); +#147628 = ORIENTED_EDGE('',*,*,#147629,.F.); +#147629 = EDGE_CURVE('',#147630,#147632,#147634,.T.); +#147630 = VERTEX_POINT('',#147631); +#147631 = CARTESIAN_POINT('',(-1.25,-9.1989,-5.23)); +#147632 = VERTEX_POINT('',#147633); +#147633 = CARTESIAN_POINT('',(-1.25,-9.1989,-4.45)); +#147634 = LINE('',#147635,#147636); +#147635 = CARTESIAN_POINT('',(-1.25,-9.1989,-5.23)); +#147636 = VECTOR('',#147637,1.); +#147637 = DIRECTION('',(0.,0.,1.)); +#147638 = ORIENTED_EDGE('',*,*,#147639,.T.); +#147639 = EDGE_CURVE('',#147630,#147640,#147642,.T.); +#147640 = VERTEX_POINT('',#147641); +#147641 = CARTESIAN_POINT('',(-0.45,-9.1989,-6.03)); +#147642 = CIRCLE('',#147643,0.8); +#147643 = AXIS2_PLACEMENT_3D('',#147644,#147645,#147646); +#147644 = CARTESIAN_POINT('',(-0.45,-9.1989,-5.23)); +#147645 = DIRECTION('',(0.,-1.,0.)); +#147646 = DIRECTION('',(-1.,0.,0.)); +#147647 = ORIENTED_EDGE('',*,*,#147648,.T.); +#147648 = EDGE_CURVE('',#147640,#147590,#147649,.T.); +#147649 = LINE('',#147650,#147651); +#147650 = CARTESIAN_POINT('',(-0.45,-9.1989,-6.03)); +#147651 = VECTOR('',#147652,1.); +#147652 = DIRECTION('',(1.,0.,0.)); +#147653 = ORIENTED_EDGE('',*,*,#147614,.T.); +#147654 = ORIENTED_EDGE('',*,*,#147655,.T.); +#147655 = EDGE_CURVE('',#147607,#147656,#147658,.T.); +#147656 = VERTEX_POINT('',#147657); +#147657 = CARTESIAN_POINT('',(1.25,-9.1989,-4.45)); +#147658 = LINE('',#147659,#147660); +#147659 = CARTESIAN_POINT('',(1.25,-9.1989,-5.23)); +#147660 = VECTOR('',#147661,1.); +#147661 = DIRECTION('',(0.,0.,1.)); +#147662 = ORIENTED_EDGE('',*,*,#147663,.T.); +#147663 = EDGE_CURVE('',#147656,#147664,#147666,.T.); +#147664 = VERTEX_POINT('',#147665); +#147665 = CARTESIAN_POINT('',(0.45,-9.1989,-3.65)); +#147666 = CIRCLE('',#147667,0.8); +#147667 = AXIS2_PLACEMENT_3D('',#147668,#147669,#147670); +#147668 = CARTESIAN_POINT('',(0.45,-9.1989,-4.45)); +#147669 = DIRECTION('',(0.,-1.,0.)); +#147670 = DIRECTION('',(1.,0.,0.)); +#147671 = ORIENTED_EDGE('',*,*,#147672,.F.); +#147672 = EDGE_CURVE('',#147673,#147664,#147675,.T.); +#147673 = VERTEX_POINT('',#147674); +#147674 = CARTESIAN_POINT('',(-0.45,-9.1989,-3.65)); +#147675 = LINE('',#147676,#147677); +#147676 = CARTESIAN_POINT('',(-0.45,-9.1989,-3.65)); +#147677 = VECTOR('',#147678,1.); +#147678 = DIRECTION('',(1.,0.,0.)); +#147679 = ORIENTED_EDGE('',*,*,#147680,.T.); +#147680 = EDGE_CURVE('',#147673,#147632,#147681,.T.); +#147681 = CIRCLE('',#147682,0.8); +#147682 = AXIS2_PLACEMENT_3D('',#147683,#147684,#147685); +#147683 = CARTESIAN_POINT('',(-0.45,-9.1989,-4.45)); +#147684 = DIRECTION('',(0.,-1.,0.)); +#147685 = DIRECTION('',(0.,0.,1.)); +#147686 = PLANE('',#147687); +#147687 = AXIS2_PLACEMENT_3D('',#147688,#147689,#147690); +#147688 = CARTESIAN_POINT('',(-1.25,-9.1989,-6.03)); +#147689 = DIRECTION('',(0.,-1.,0.)); +#147690 = DIRECTION('',(0.,0.,-1.)); +#147691 = ADVANCED_FACE('',(#147692),#147718,.T.); +#147692 = FACE_BOUND('',#147693,.T.); +#147693 = EDGE_LOOP('',(#147694,#147702,#147711,#147717)); +#147694 = ORIENTED_EDGE('',*,*,#147695,.F.); +#147695 = EDGE_CURVE('',#147696,#147673,#147698,.T.); +#147696 = VERTEX_POINT('',#147697); +#147697 = CARTESIAN_POINT('',(-0.45,-7.6989,-3.65)); +#147698 = LINE('',#147699,#147700); +#147699 = CARTESIAN_POINT('',(-0.45,-7.6989,-3.65)); +#147700 = VECTOR('',#147701,1.); +#147701 = DIRECTION('',(0.,-1.,0.)); +#147702 = ORIENTED_EDGE('',*,*,#147703,.F.); +#147703 = EDGE_CURVE('',#147704,#147696,#147706,.T.); +#147704 = VERTEX_POINT('',#147705); +#147705 = CARTESIAN_POINT('',(-1.25,-7.6989,-4.45)); +#147706 = CIRCLE('',#147707,0.8); +#147707 = AXIS2_PLACEMENT_3D('',#147708,#147709,#147710); +#147708 = CARTESIAN_POINT('',(-0.45,-7.6989,-4.45)); +#147709 = DIRECTION('',(0.,1.,0.)); +#147710 = DIRECTION('',(-1.,0.,0.)); +#147711 = ORIENTED_EDGE('',*,*,#147712,.T.); +#147712 = EDGE_CURVE('',#147704,#147632,#147713,.T.); +#147713 = LINE('',#147714,#147715); +#147714 = CARTESIAN_POINT('',(-1.25,-7.6989,-4.45)); +#147715 = VECTOR('',#147716,1.); +#147716 = DIRECTION('',(0.,-1.,0.)); +#147717 = ORIENTED_EDGE('',*,*,#147680,.F.); +#147718 = CYLINDRICAL_SURFACE('',#147719,0.8); +#147719 = AXIS2_PLACEMENT_3D('',#147720,#147721,#147722); +#147720 = CARTESIAN_POINT('',(-0.45,30.91227487194,-4.45)); +#147721 = DIRECTION('',(0.,-1.,0.)); +#147722 = DIRECTION('',(0.,0.,1.)); +#147723 = ADVANCED_FACE('',(#147724),#147742,.T.); +#147724 = FACE_BOUND('',#147725,.T.); +#147725 = EDGE_LOOP('',(#147726,#147734,#147740,#147741)); +#147726 = ORIENTED_EDGE('',*,*,#147727,.F.); +#147727 = EDGE_CURVE('',#147728,#147704,#147730,.T.); +#147728 = VERTEX_POINT('',#147729); +#147729 = CARTESIAN_POINT('',(-1.25,-7.6989,-5.23)); +#147730 = LINE('',#147731,#147732); +#147731 = CARTESIAN_POINT('',(-1.25,-7.6989,-5.23)); +#147732 = VECTOR('',#147733,1.); +#147733 = DIRECTION('',(0.,0.,1.)); +#147734 = ORIENTED_EDGE('',*,*,#147735,.F.); +#147735 = EDGE_CURVE('',#147630,#147728,#147736,.T.); +#147736 = LINE('',#147737,#147738); +#147737 = CARTESIAN_POINT('',(-1.25,-9.1989,-5.23)); +#147738 = VECTOR('',#147739,1.); +#147739 = DIRECTION('',(0.,1.,0.)); +#147740 = ORIENTED_EDGE('',*,*,#147629,.T.); +#147741 = ORIENTED_EDGE('',*,*,#147712,.F.); +#147742 = PLANE('',#147743); +#147743 = AXIS2_PLACEMENT_3D('',#147744,#147745,#147746); +#147744 = CARTESIAN_POINT('',(-1.25,-7.6989,-6.03)); +#147745 = DIRECTION('',(-1.,0.,0.)); +#147746 = DIRECTION('',(0.,0.,1.)); +#147747 = ADVANCED_FACE('',(#147748),#147767,.T.); +#147748 = FACE_BOUND('',#147749,.T.); +#147749 = EDGE_LOOP('',(#147750,#147758,#147759,#147760)); +#147750 = ORIENTED_EDGE('',*,*,#147751,.F.); +#147751 = EDGE_CURVE('',#147640,#147752,#147754,.T.); +#147752 = VERTEX_POINT('',#147753); +#147753 = CARTESIAN_POINT('',(-0.45,-7.6989,-6.03)); +#147754 = LINE('',#147755,#147756); +#147755 = CARTESIAN_POINT('',(-0.45,-9.1989,-6.03)); +#147756 = VECTOR('',#147757,1.); +#147757 = DIRECTION('',(0.,1.,0.)); +#147758 = ORIENTED_EDGE('',*,*,#147639,.F.); +#147759 = ORIENTED_EDGE('',*,*,#147735,.T.); +#147760 = ORIENTED_EDGE('',*,*,#147761,.F.); +#147761 = EDGE_CURVE('',#147752,#147728,#147762,.T.); +#147762 = CIRCLE('',#147763,0.8); +#147763 = AXIS2_PLACEMENT_3D('',#147764,#147765,#147766); +#147764 = CARTESIAN_POINT('',(-0.45,-7.6989,-5.23)); +#147765 = DIRECTION('',(0.,1.,0.)); +#147766 = DIRECTION('',(0.,0.,-1.)); +#147767 = CYLINDRICAL_SURFACE('',#147768,0.8); +#147768 = AXIS2_PLACEMENT_3D('',#147769,#147770,#147771); +#147769 = CARTESIAN_POINT('',(-0.45,-36.67994659691,-5.23)); +#147770 = DIRECTION('',(0.,1.,0.)); +#147771 = DIRECTION('',(0.,0.,-1.)); +#147772 = ADVANCED_FACE('',(#147773),#147808,.T.); +#147773 = FACE_BOUND('',#147774,.T.); +#147774 = EDGE_LOOP('',(#147775,#147783,#147792,#147798,#147799,#147805, + #147806,#147807)); +#147775 = ORIENTED_EDGE('',*,*,#147776,.F.); +#147776 = EDGE_CURVE('',#147777,#147696,#147779,.T.); +#147777 = VERTEX_POINT('',#147778); +#147778 = CARTESIAN_POINT('',(0.45,-7.6989,-3.65)); +#147779 = LINE('',#147780,#147781); +#147780 = CARTESIAN_POINT('',(0.45,-7.6989,-3.65)); +#147781 = VECTOR('',#147782,1.); +#147782 = DIRECTION('',(-1.,0.,0.)); +#147783 = ORIENTED_EDGE('',*,*,#147784,.T.); +#147784 = EDGE_CURVE('',#147777,#147785,#147787,.T.); +#147785 = VERTEX_POINT('',#147786); +#147786 = CARTESIAN_POINT('',(1.25,-7.6989,-4.45)); +#147787 = CIRCLE('',#147788,0.8); +#147788 = AXIS2_PLACEMENT_3D('',#147789,#147790,#147791); +#147789 = CARTESIAN_POINT('',(0.45,-7.6989,-4.45)); +#147790 = DIRECTION('',(0.,1.,0.)); +#147791 = DIRECTION('',(0.,-0.,1.)); +#147792 = ORIENTED_EDGE('',*,*,#147793,.F.); +#147793 = EDGE_CURVE('',#147598,#147785,#147794,.T.); +#147794 = LINE('',#147795,#147796); +#147795 = CARTESIAN_POINT('',(1.25,-7.6989,-5.23)); +#147796 = VECTOR('',#147797,1.); +#147797 = DIRECTION('',(0.,0.,1.)); +#147798 = ORIENTED_EDGE('',*,*,#147597,.T.); +#147799 = ORIENTED_EDGE('',*,*,#147800,.T.); +#147800 = EDGE_CURVE('',#147588,#147752,#147801,.T.); +#147801 = LINE('',#147802,#147803); +#147802 = CARTESIAN_POINT('',(0.45,-7.6989,-6.03)); +#147803 = VECTOR('',#147804,1.); +#147804 = DIRECTION('',(-1.,0.,0.)); +#147805 = ORIENTED_EDGE('',*,*,#147761,.T.); +#147806 = ORIENTED_EDGE('',*,*,#147727,.T.); +#147807 = ORIENTED_EDGE('',*,*,#147703,.T.); +#147808 = PLANE('',#147809); +#147809 = AXIS2_PLACEMENT_3D('',#147810,#147811,#147812); +#147810 = CARTESIAN_POINT('',(1.25,-7.6989,-6.03)); +#147811 = DIRECTION('',(-0.,1.,0.)); +#147812 = DIRECTION('',(1.,0.,0.)); +#147813 = ADVANCED_FACE('',(#147814),#147820,.F.); +#147814 = FACE_BOUND('',#147815,.T.); +#147815 = EDGE_LOOP('',(#147816,#147817,#147818,#147819)); +#147816 = ORIENTED_EDGE('',*,*,#147800,.F.); +#147817 = ORIENTED_EDGE('',*,*,#147587,.T.); +#147818 = ORIENTED_EDGE('',*,*,#147648,.F.); +#147819 = ORIENTED_EDGE('',*,*,#147751,.T.); +#147820 = PLANE('',#147821); +#147821 = AXIS2_PLACEMENT_3D('',#147822,#147823,#147824); +#147822 = CARTESIAN_POINT('',(0.,0.,-6.03)); +#147823 = DIRECTION('',(0.,0.,1.)); +#147824 = DIRECTION('',(1.,0.,-0.)); +#147825 = ADVANCED_FACE('',(#147826),#147837,.T.); +#147826 = FACE_BOUND('',#147827,.T.); +#147827 = EDGE_LOOP('',(#147828,#147829,#147830,#147831)); +#147828 = ORIENTED_EDGE('',*,*,#147655,.F.); +#147829 = ORIENTED_EDGE('',*,*,#147606,.F.); +#147830 = ORIENTED_EDGE('',*,*,#147793,.T.); +#147831 = ORIENTED_EDGE('',*,*,#147832,.F.); +#147832 = EDGE_CURVE('',#147656,#147785,#147833,.T.); +#147833 = LINE('',#147834,#147835); +#147834 = CARTESIAN_POINT('',(1.25,-9.1989,-4.45)); +#147835 = VECTOR('',#147836,1.); +#147836 = DIRECTION('',(0.,1.,0.)); +#147837 = PLANE('',#147838); +#147838 = AXIS2_PLACEMENT_3D('',#147839,#147840,#147841); +#147839 = CARTESIAN_POINT('',(1.25,-9.1989,-6.03)); +#147840 = DIRECTION('',(1.,0.,0.)); +#147841 = DIRECTION('',(-0.,1.,0.)); +#147842 = ADVANCED_FACE('',(#147843),#147854,.T.); +#147843 = FACE_BOUND('',#147844,.T.); +#147844 = EDGE_LOOP('',(#147845,#147851,#147852,#147853)); +#147845 = ORIENTED_EDGE('',*,*,#147846,.F.); +#147846 = EDGE_CURVE('',#147664,#147777,#147847,.T.); +#147847 = LINE('',#147848,#147849); +#147848 = CARTESIAN_POINT('',(0.45,-9.1989,-3.65)); +#147849 = VECTOR('',#147850,1.); +#147850 = DIRECTION('',(0.,1.,0.)); +#147851 = ORIENTED_EDGE('',*,*,#147663,.F.); +#147852 = ORIENTED_EDGE('',*,*,#147832,.T.); +#147853 = ORIENTED_EDGE('',*,*,#147784,.F.); +#147854 = CYLINDRICAL_SURFACE('',#147855,0.8); +#147855 = AXIS2_PLACEMENT_3D('',#147856,#147857,#147858); +#147856 = CARTESIAN_POINT('',(0.45,-36.67994659691,-4.45)); +#147857 = DIRECTION('',(0.,1.,0.)); +#147858 = DIRECTION('',(0.,-0.,1.)); +#147859 = ADVANCED_FACE('',(#147860),#147866,.T.); +#147860 = FACE_BOUND('',#147861,.T.); +#147861 = EDGE_LOOP('',(#147862,#147863,#147864,#147865)); +#147862 = ORIENTED_EDGE('',*,*,#147672,.T.); +#147863 = ORIENTED_EDGE('',*,*,#147846,.T.); +#147864 = ORIENTED_EDGE('',*,*,#147776,.T.); +#147865 = ORIENTED_EDGE('',*,*,#147695,.T.); +#147866 = PLANE('',#147867); +#147867 = AXIS2_PLACEMENT_3D('',#147868,#147869,#147870); +#147868 = CARTESIAN_POINT('',(0.,0.,-3.65)); +#147869 = DIRECTION('',(0.,0.,1.)); +#147870 = DIRECTION('',(1.,0.,-0.)); +#147871 = MANIFOLD_SOLID_BREP('',#147872); +#147872 = CLOSED_SHELL('',(#147873,#147913,#147944,#147975,#148006, + #148037,#148059,#148073)); +#147873 = ADVANCED_FACE('',(#147874),#147908,.F.); +#147874 = FACE_BOUND('',#147875,.T.); +#147875 = EDGE_LOOP('',(#147876,#147886,#147894,#147902)); +#147876 = ORIENTED_EDGE('',*,*,#147877,.T.); +#147877 = EDGE_CURVE('',#147878,#147880,#147882,.T.); +#147878 = VERTEX_POINT('',#147879); +#147879 = CARTESIAN_POINT('',(-6.575,3.168863062872,-1.629704868496)); +#147880 = VERTEX_POINT('',#147881); +#147881 = CARTESIAN_POINT('',(-6.575,3.168863062872,-1.583331665429)); +#147882 = LINE('',#147883,#147884); +#147883 = CARTESIAN_POINT('',(-6.575,3.168863062872,-1.583331665429)); +#147884 = VECTOR('',#147885,1.); +#147885 = DIRECTION('',(-0.,9.35197140388E-15,1.)); +#147886 = ORIENTED_EDGE('',*,*,#147887,.F.); +#147887 = EDGE_CURVE('',#147888,#147880,#147890,.T.); +#147888 = VERTEX_POINT('',#147889); +#147889 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.583331665429)); +#147890 = LINE('',#147891,#147892); +#147891 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.583331665429)); +#147892 = VECTOR('',#147893,1.); +#147893 = DIRECTION('',(1.,-0.,-0.)); +#147894 = ORIENTED_EDGE('',*,*,#147895,.F.); +#147895 = EDGE_CURVE('',#147896,#147888,#147898,.T.); +#147896 = VERTEX_POINT('',#147897); +#147897 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.629704868496)); +#147898 = LINE('',#147899,#147900); +#147899 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.583331665429)); +#147900 = VECTOR('',#147901,1.); +#147901 = DIRECTION('',(-0.,9.35197140388E-15,1.)); +#147902 = ORIENTED_EDGE('',*,*,#147903,.T.); +#147903 = EDGE_CURVE('',#147896,#147878,#147904,.T.); +#147904 = LINE('',#147905,#147906); +#147905 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.629704868496)); +#147906 = VECTOR('',#147907,1.); +#147907 = DIRECTION('',(1.,-0.,-0.)); +#147908 = PLANE('',#147909); +#147909 = AXIS2_PLACEMENT_3D('',#147910,#147911,#147912); +#147910 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.583331665429)); +#147911 = DIRECTION('',(0.,1.,-9.35197140388E-15)); +#147912 = DIRECTION('',(0.,9.35197140388E-15,1.)); +#147913 = ADVANCED_FACE('',(#147914),#147939,.F.); +#147914 = FACE_BOUND('',#147915,.T.); +#147915 = EDGE_LOOP('',(#147916,#147924,#147932,#147938)); +#147916 = ORIENTED_EDGE('',*,*,#147917,.T.); +#147917 = EDGE_CURVE('',#147880,#147918,#147920,.T.); +#147918 = VERTEX_POINT('',#147919); +#147919 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.583331665429)); +#147920 = LINE('',#147921,#147922); +#147921 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.583331665429)); +#147922 = VECTOR('',#147923,1.); +#147923 = DIRECTION('',(-0.,1.,-1.070854748674E-14)); +#147924 = ORIENTED_EDGE('',*,*,#147925,.F.); +#147925 = EDGE_CURVE('',#147926,#147918,#147928,.T.); +#147926 = VERTEX_POINT('',#147927); +#147927 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.583331665429)); +#147928 = LINE('',#147929,#147930); +#147929 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.583331665429)); +#147930 = VECTOR('',#147931,1.); +#147931 = DIRECTION('',(1.,-0.,-0.)); +#147932 = ORIENTED_EDGE('',*,*,#147933,.F.); +#147933 = EDGE_CURVE('',#147888,#147926,#147934,.T.); +#147934 = LINE('',#147935,#147936); +#147935 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.583331665429)); +#147936 = VECTOR('',#147937,1.); +#147937 = DIRECTION('',(-0.,1.,-1.070854748674E-14)); +#147938 = ORIENTED_EDGE('',*,*,#147887,.T.); +#147939 = PLANE('',#147940); +#147940 = AXIS2_PLACEMENT_3D('',#147941,#147942,#147943); +#147941 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.583331665429)); +#147942 = DIRECTION('',(0.,-1.070854748674E-14,-1.)); +#147943 = DIRECTION('',(0.,1.,-1.070854748674E-14)); +#147944 = ADVANCED_FACE('',(#147945),#147970,.F.); +#147945 = FACE_BOUND('',#147946,.T.); +#147946 = EDGE_LOOP('',(#147947,#147955,#147963,#147969)); +#147947 = ORIENTED_EDGE('',*,*,#147948,.T.); +#147948 = EDGE_CURVE('',#147918,#147949,#147951,.T.); +#147949 = VERTEX_POINT('',#147950); +#147950 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.222951571634)); +#147951 = LINE('',#147952,#147953); +#147952 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.222951571634)); +#147953 = VECTOR('',#147954,1.); +#147954 = DIRECTION('',(-0.,9.627188104142E-15,1.)); +#147955 = ORIENTED_EDGE('',*,*,#147956,.F.); +#147956 = EDGE_CURVE('',#147957,#147949,#147959,.T.); +#147957 = VERTEX_POINT('',#147958); +#147958 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.222951571634)); +#147959 = LINE('',#147960,#147961); +#147960 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.222951571634)); +#147961 = VECTOR('',#147962,1.); +#147962 = DIRECTION('',(1.,-0.,-0.)); +#147963 = ORIENTED_EDGE('',*,*,#147964,.F.); +#147964 = EDGE_CURVE('',#147926,#147957,#147965,.T.); +#147965 = LINE('',#147966,#147967); +#147966 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.222951571634)); +#147967 = VECTOR('',#147968,1.); +#147968 = DIRECTION('',(-0.,9.627188104142E-15,1.)); +#147969 = ORIENTED_EDGE('',*,*,#147925,.T.); +#147970 = PLANE('',#147971); +#147971 = AXIS2_PLACEMENT_3D('',#147972,#147973,#147974); +#147972 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.222951571634)); +#147973 = DIRECTION('',(0.,1.,-9.627188104142E-15)); +#147974 = DIRECTION('',(0.,9.627188104142E-15,1.)); +#147975 = ADVANCED_FACE('',(#147976),#148001,.F.); +#147976 = FACE_BOUND('',#147977,.T.); +#147977 = EDGE_LOOP('',(#147978,#147986,#147994,#148000)); +#147978 = ORIENTED_EDGE('',*,*,#147979,.T.); +#147979 = EDGE_CURVE('',#147949,#147980,#147982,.T.); +#147980 = VERTEX_POINT('',#147981); +#147981 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.222951571634)); +#147982 = LINE('',#147983,#147984); +#147983 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.222951571634)); +#147984 = VECTOR('',#147985,1.); +#147985 = DIRECTION('',(-0.,1.,-8.259364843827E-15)); +#147986 = ORIENTED_EDGE('',*,*,#147987,.F.); +#147987 = EDGE_CURVE('',#147988,#147980,#147990,.T.); +#147988 = VERTEX_POINT('',#147989); +#147989 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.222951571634)); +#147990 = LINE('',#147991,#147992); +#147991 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.222951571634)); +#147992 = VECTOR('',#147993,1.); +#147993 = DIRECTION('',(1.,-0.,-0.)); +#147994 = ORIENTED_EDGE('',*,*,#147995,.F.); +#147995 = EDGE_CURVE('',#147957,#147988,#147996,.T.); +#147996 = LINE('',#147997,#147998); +#147997 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.222951571634)); +#147998 = VECTOR('',#147999,1.); +#147999 = DIRECTION('',(-0.,1.,-8.259364843827E-15)); +#148000 = ORIENTED_EDGE('',*,*,#147956,.T.); +#148001 = PLANE('',#148002); +#148002 = AXIS2_PLACEMENT_3D('',#148003,#148004,#148005); +#148003 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.222951571634)); +#148004 = DIRECTION('',(0.,-8.259364843827E-15,-1.)); +#148005 = DIRECTION('',(0.,1.,-8.259364843827E-15)); +#148006 = ADVANCED_FACE('',(#148007),#148032,.F.); +#148007 = FACE_BOUND('',#148008,.T.); +#148008 = EDGE_LOOP('',(#148009,#148017,#148025,#148031)); +#148009 = ORIENTED_EDGE('',*,*,#148010,.T.); +#148010 = EDGE_CURVE('',#147980,#148011,#148013,.T.); +#148011 = VERTEX_POINT('',#148012); +#148012 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.629704868496)); +#148013 = LINE('',#148014,#148015); +#148014 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.629704868496)); +#148015 = VECTOR('',#148016,1.); +#148016 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#148017 = ORIENTED_EDGE('',*,*,#148018,.F.); +#148018 = EDGE_CURVE('',#148019,#148011,#148021,.T.); +#148019 = VERTEX_POINT('',#148020); +#148020 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.629704868496)); +#148021 = LINE('',#148022,#148023); +#148022 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.629704868496)); +#148023 = VECTOR('',#148024,1.); +#148024 = DIRECTION('',(1.,-0.,-0.)); +#148025 = ORIENTED_EDGE('',*,*,#148026,.F.); +#148026 = EDGE_CURVE('',#147988,#148019,#148027,.T.); +#148027 = LINE('',#148028,#148029); +#148028 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.629704868496)); +#148029 = VECTOR('',#148030,1.); +#148030 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#148031 = ORIENTED_EDGE('',*,*,#147987,.T.); +#148032 = PLANE('',#148033); +#148033 = AXIS2_PLACEMENT_3D('',#148034,#148035,#148036); +#148034 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.629704868496)); +#148035 = DIRECTION('',(0.,-1.,1.066201238783E-14)); +#148036 = DIRECTION('',(0.,-1.066201238783E-14,-1.)); +#148037 = ADVANCED_FACE('',(#148038),#148054,.F.); +#148038 = FACE_BOUND('',#148039,.T.); +#148039 = EDGE_LOOP('',(#148040,#148046,#148047,#148053)); +#148040 = ORIENTED_EDGE('',*,*,#148041,.T.); +#148041 = EDGE_CURVE('',#148011,#147878,#148042,.T.); +#148042 = LINE('',#148043,#148044); +#148043 = CARTESIAN_POINT('',(-6.575,3.168863062872,-1.629704868496)); +#148044 = VECTOR('',#148045,1.); +#148045 = DIRECTION('',(-0.,-1.,1.111991558581E-14)); +#148046 = ORIENTED_EDGE('',*,*,#147903,.F.); +#148047 = ORIENTED_EDGE('',*,*,#148048,.F.); +#148048 = EDGE_CURVE('',#148019,#147896,#148049,.T.); +#148049 = LINE('',#148050,#148051); +#148050 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.629704868496)); +#148051 = VECTOR('',#148052,1.); +#148052 = DIRECTION('',(-0.,-1.,1.111991558581E-14)); +#148053 = ORIENTED_EDGE('',*,*,#148018,.T.); +#148054 = PLANE('',#148055); +#148055 = AXIS2_PLACEMENT_3D('',#148056,#148057,#148058); +#148056 = CARTESIAN_POINT('',(-6.576,3.168863062872,-1.629704868496)); +#148057 = DIRECTION('',(0.,1.111991558581E-14,1.)); +#148058 = DIRECTION('',(0.,-1.,1.111991558581E-14)); +#148059 = ADVANCED_FACE('',(#148060),#148068,.F.); +#148060 = FACE_BOUND('',#148061,.T.); +#148061 = EDGE_LOOP('',(#148062,#148063,#148064,#148065,#148066,#148067) + ); +#148062 = ORIENTED_EDGE('',*,*,#147895,.T.); +#148063 = ORIENTED_EDGE('',*,*,#147933,.T.); +#148064 = ORIENTED_EDGE('',*,*,#147964,.T.); +#148065 = ORIENTED_EDGE('',*,*,#147995,.T.); +#148066 = ORIENTED_EDGE('',*,*,#148026,.T.); +#148067 = ORIENTED_EDGE('',*,*,#148048,.T.); +#148068 = PLANE('',#148069); +#148069 = AXIS2_PLACEMENT_3D('',#148070,#148071,#148072); +#148070 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#148071 = DIRECTION('',(1.,0.,0.)); +#148072 = DIRECTION('',(0.,0.,-1.)); +#148073 = ADVANCED_FACE('',(#148074),#148082,.T.); +#148074 = FACE_BOUND('',#148075,.T.); +#148075 = EDGE_LOOP('',(#148076,#148077,#148078,#148079,#148080,#148081) + ); +#148076 = ORIENTED_EDGE('',*,*,#147877,.F.); +#148077 = ORIENTED_EDGE('',*,*,#148041,.F.); +#148078 = ORIENTED_EDGE('',*,*,#148010,.F.); +#148079 = ORIENTED_EDGE('',*,*,#147979,.F.); +#148080 = ORIENTED_EDGE('',*,*,#147948,.F.); +#148081 = ORIENTED_EDGE('',*,*,#147917,.F.); +#148082 = PLANE('',#148083); +#148083 = AXIS2_PLACEMENT_3D('',#148084,#148085,#148086); +#148084 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#148085 = DIRECTION('',(1.,0.,0.)); +#148086 = DIRECTION('',(0.,0.,-1.)); +#148087 = MANIFOLD_SOLID_BREP('',#148088); +#148088 = CLOSED_SHELL('',(#148089,#148135,#148166,#148203,#148240, + #148277,#148314,#148351,#148388,#148419,#148456,#148493,#148530, + #148567,#148595,#148617)); +#148089 = ADVANCED_FACE('',(#148090),#148126,.F.); +#148090 = FACE_BOUND('',#148091,.F.); +#148091 = EDGE_LOOP('',(#148092,#148102,#148111,#148119)); +#148092 = ORIENTED_EDGE('',*,*,#148093,.F.); +#148093 = EDGE_CURVE('',#148094,#148096,#148098,.T.); +#148094 = VERTEX_POINT('',#148095); +#148095 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148096 = VERTEX_POINT('',#148097); +#148097 = CARTESIAN_POINT('',(-6.575,2.96028762486,-1.636567270745)); +#148098 = LINE('',#148099,#148100); +#148099 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148100 = VECTOR('',#148101,1.); +#148101 = DIRECTION('',(1.,-0.,-0.)); +#148102 = ORIENTED_EDGE('',*,*,#148103,.T.); +#148103 = EDGE_CURVE('',#148094,#148104,#148106,.T.); +#148104 = VERTEX_POINT('',#148105); +#148105 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.612860790252)); +#148106 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148107,#148108,#148109, + #148110),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148107 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148108 = CARTESIAN_POINT('',(-6.576,2.915162131292,-1.636567270745)); +#148109 = CARTESIAN_POINT('',(-6.576,2.877626870512,-1.628665110581)); +#148110 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.612860790252)); +#148111 = ORIENTED_EDGE('',*,*,#148112,.T.); +#148112 = EDGE_CURVE('',#148104,#148113,#148115,.T.); +#148113 = VERTEX_POINT('',#148114); +#148114 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.612860790252)); +#148115 = LINE('',#148116,#148117); +#148116 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.612860790252)); +#148117 = VECTOR('',#148118,1.); +#148118 = DIRECTION('',(1.,-0.,-0.)); +#148119 = ORIENTED_EDGE('',*,*,#148120,.F.); +#148120 = EDGE_CURVE('',#148096,#148113,#148121,.T.); +#148121 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148122,#148123,#148124, + #148125),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148122 = CARTESIAN_POINT('',(-6.575,2.96028762486,-1.636567270745)); +#148123 = CARTESIAN_POINT('',(-6.575,2.915162131292,-1.636567270745)); +#148124 = CARTESIAN_POINT('',(-6.575,2.877626870512,-1.628665110581)); +#148125 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.612860790252)); +#148126 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148127,#148128) + ,(#148129,#148130) + ,(#148131,#148132) + ,(#148133,#148134 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148127 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148128 = CARTESIAN_POINT('',(-6.575,2.96028762486,-1.636567270745)); +#148129 = CARTESIAN_POINT('',(-6.576,2.915162131292,-1.636567270745)); +#148130 = CARTESIAN_POINT('',(-6.575,2.915162131292,-1.636567270745)); +#148131 = CARTESIAN_POINT('',(-6.576,2.877626870512,-1.628665110581)); +#148132 = CARTESIAN_POINT('',(-6.575,2.877626870512,-1.628665110581)); +#148133 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.612860790252)); +#148134 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.612860790252)); +#148135 = ADVANCED_FACE('',(#148136),#148161,.F.); +#148136 = FACE_BOUND('',#148137,.T.); +#148137 = EDGE_LOOP('',(#148138,#148146,#148154,#148160)); +#148138 = ORIENTED_EDGE('',*,*,#148139,.T.); +#148139 = EDGE_CURVE('',#148113,#148140,#148142,.T.); +#148140 = VERTEX_POINT('',#148141); +#148141 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.562536507101)); +#148142 = LINE('',#148143,#148144); +#148143 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.562536507101)); +#148144 = VECTOR('',#148145,1.); +#148145 = DIRECTION('',(-0.,1.723545142993E-14,1.)); +#148146 = ORIENTED_EDGE('',*,*,#148147,.F.); +#148147 = EDGE_CURVE('',#148148,#148140,#148150,.T.); +#148148 = VERTEX_POINT('',#148149); +#148149 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148150 = LINE('',#148151,#148152); +#148151 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148152 = VECTOR('',#148153,1.); +#148153 = DIRECTION('',(1.,-0.,-0.)); +#148154 = ORIENTED_EDGE('',*,*,#148155,.F.); +#148155 = EDGE_CURVE('',#148104,#148148,#148156,.T.); +#148156 = LINE('',#148157,#148158); +#148157 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148158 = VECTOR('',#148159,1.); +#148159 = DIRECTION('',(-0.,1.723545142993E-14,1.)); +#148160 = ORIENTED_EDGE('',*,*,#148112,.T.); +#148161 = PLANE('',#148162); +#148162 = AXIS2_PLACEMENT_3D('',#148163,#148164,#148165); +#148163 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148164 = DIRECTION('',(0.,1.,-1.723545142993E-14)); +#148165 = DIRECTION('',(0.,1.723545142993E-14,1.)); +#148166 = ADVANCED_FACE('',(#148167),#148194,.F.); +#148167 = FACE_BOUND('',#148168,.F.); +#148168 = EDGE_LOOP('',(#148169,#148170,#148179,#148187)); +#148169 = ORIENTED_EDGE('',*,*,#148147,.F.); +#148170 = ORIENTED_EDGE('',*,*,#148171,.T.); +#148171 = EDGE_CURVE('',#148148,#148172,#148174,.T.); +#148172 = VERTEX_POINT('',#148173); +#148173 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148174 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148175,#148176,#148177, + #148178),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#148175 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148176 = CARTESIAN_POINT('',(-6.576,2.877418918929,-1.580628294847)); +#148177 = CARTESIAN_POINT('',(-6.576,2.912458760709,-1.589778164511)); +#148178 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148179 = ORIENTED_EDGE('',*,*,#148180,.T.); +#148180 = EDGE_CURVE('',#148172,#148181,#148183,.T.); +#148181 = VERTEX_POINT('',#148182); +#148182 = CARTESIAN_POINT('',(-6.575,2.952697392071,-1.589778164511)); +#148183 = LINE('',#148184,#148185); +#148184 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148185 = VECTOR('',#148186,1.); +#148186 = DIRECTION('',(1.,-0.,-0.)); +#148187 = ORIENTED_EDGE('',*,*,#148188,.F.); +#148188 = EDGE_CURVE('',#148140,#148181,#148189,.T.); +#148189 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148190,#148191,#148192, + #148193),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#148190 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.562536507101)); +#148191 = CARTESIAN_POINT('',(-6.575,2.877418918929,-1.580628294847)); +#148192 = CARTESIAN_POINT('',(-6.575,2.912458760709,-1.589778164511)); +#148193 = CARTESIAN_POINT('',(-6.575,2.952697392071,-1.589778164511)); +#148194 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148195,#148196) + ,(#148197,#148198) + ,(#148199,#148200) + ,(#148201,#148202 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148195 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.562536507101)); +#148196 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.562536507101)); +#148197 = CARTESIAN_POINT('',(-6.576,2.877418918929,-1.580628294847)); +#148198 = CARTESIAN_POINT('',(-6.575,2.877418918929,-1.580628294847)); +#148199 = CARTESIAN_POINT('',(-6.576,2.912458760709,-1.589778164511)); +#148200 = CARTESIAN_POINT('',(-6.575,2.912458760709,-1.589778164511)); +#148201 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148202 = CARTESIAN_POINT('',(-6.575,2.952697392071,-1.589778164511)); +#148203 = ADVANCED_FACE('',(#148204),#148231,.F.); +#148204 = FACE_BOUND('',#148205,.F.); +#148205 = EDGE_LOOP('',(#148206,#148207,#148216,#148224)); +#148206 = ORIENTED_EDGE('',*,*,#148180,.F.); +#148207 = ORIENTED_EDGE('',*,*,#148208,.T.); +#148208 = EDGE_CURVE('',#148172,#148209,#148211,.T.); +#148209 = VERTEX_POINT('',#148210); +#148210 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148211 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148212,#148213,#148214, + #148215),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#148212 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148213 = CARTESIAN_POINT('',(-6.576,2.995743369806,-1.589778164511)); +#148214 = CARTESIAN_POINT('',(-6.576,3.030575260003,-1.575429505265)); +#148215 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148216 = ORIENTED_EDGE('',*,*,#148217,.T.); +#148217 = EDGE_CURVE('',#148209,#148218,#148220,.T.); +#148218 = VERTEX_POINT('',#148219); +#148219 = CARTESIAN_POINT('',(-6.575,3.057193062661,-1.546940138358)); +#148220 = LINE('',#148221,#148222); +#148221 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148222 = VECTOR('',#148223,1.); +#148223 = DIRECTION('',(1.,-0.,-0.)); +#148224 = ORIENTED_EDGE('',*,*,#148225,.F.); +#148225 = EDGE_CURVE('',#148181,#148218,#148226,.T.); +#148226 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148227,#148228,#148229, + #148230),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#148227 = CARTESIAN_POINT('',(-6.575,2.952697392071,-1.589778164511)); +#148228 = CARTESIAN_POINT('',(-6.575,2.995743369806,-1.589778164511)); +#148229 = CARTESIAN_POINT('',(-6.575,3.030575260003,-1.575429505265)); +#148230 = CARTESIAN_POINT('',(-6.575,3.057193062661,-1.546940138358)); +#148231 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148232,#148233) + ,(#148234,#148235) + ,(#148236,#148237) + ,(#148238,#148239 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148232 = CARTESIAN_POINT('',(-6.576,2.952697392071,-1.589778164511)); +#148233 = CARTESIAN_POINT('',(-6.575,2.952697392071,-1.589778164511)); +#148234 = CARTESIAN_POINT('',(-6.576,2.995743369806,-1.589778164511)); +#148235 = CARTESIAN_POINT('',(-6.575,2.995743369806,-1.589778164511)); +#148236 = CARTESIAN_POINT('',(-6.576,3.030575260003,-1.575429505265)); +#148237 = CARTESIAN_POINT('',(-6.575,3.030575260003,-1.575429505265)); +#148238 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148239 = CARTESIAN_POINT('',(-6.575,3.057193062661,-1.546940138358)); +#148240 = ADVANCED_FACE('',(#148241),#148268,.F.); +#148241 = FACE_BOUND('',#148242,.F.); +#148242 = EDGE_LOOP('',(#148243,#148244,#148253,#148261)); +#148243 = ORIENTED_EDGE('',*,*,#148217,.F.); +#148244 = ORIENTED_EDGE('',*,*,#148245,.T.); +#148245 = EDGE_CURVE('',#148209,#148246,#148248,.T.); +#148246 = VERTEX_POINT('',#148247); +#148247 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148248 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148249,#148250,#148251, + #148252),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#148249 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148250 = CARTESIAN_POINT('',(-6.576,3.083810865319,-1.518242819867)); +#148251 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.479563825379)); +#148252 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148253 = ORIENTED_EDGE('',*,*,#148254,.T.); +#148254 = EDGE_CURVE('',#148246,#148255,#148257,.T.); +#148255 = VERTEX_POINT('',#148256); +#148256 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.430903154896)); +#148257 = LINE('',#148258,#148259); +#148258 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148259 = VECTOR('',#148260,1.); +#148260 = DIRECTION('',(1.,-0.,-0.)); +#148261 = ORIENTED_EDGE('',*,*,#148262,.F.); +#148262 = EDGE_CURVE('',#148218,#148255,#148263,.T.); +#148263 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148264,#148265,#148266, + #148267),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#148264 = CARTESIAN_POINT('',(-6.575,3.057193062661,-1.546940138358)); +#148265 = CARTESIAN_POINT('',(-6.575,3.083810865319,-1.518242819867)); +#148266 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.479563825379)); +#148267 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.430903154896)); +#148268 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148269,#148270) + ,(#148271,#148272) + ,(#148273,#148274) + ,(#148275,#148276 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148269 = CARTESIAN_POINT('',(-6.576,3.057193062661,-1.546940138358)); +#148270 = CARTESIAN_POINT('',(-6.575,3.057193062661,-1.546940138358)); +#148271 = CARTESIAN_POINT('',(-6.576,3.083810865319,-1.518242819867)); +#148272 = CARTESIAN_POINT('',(-6.575,3.083810865319,-1.518242819867)); +#148273 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.479563825379)); +#148274 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.479563825379)); +#148275 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148276 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.430903154896)); +#148277 = ADVANCED_FACE('',(#148278),#148305,.F.); +#148278 = FACE_BOUND('',#148279,.F.); +#148279 = EDGE_LOOP('',(#148280,#148281,#148290,#148298)); +#148280 = ORIENTED_EDGE('',*,*,#148254,.F.); +#148281 = ORIENTED_EDGE('',*,*,#148282,.T.); +#148282 = EDGE_CURVE('',#148246,#148283,#148285,.T.); +#148283 = VERTEX_POINT('',#148284); +#148284 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148285 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148286,#148287,#148288, + #148289),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#148286 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148287 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.379747065413)); +#148288 = CARTESIAN_POINT('',(-6.576,3.082875083194,-1.338988555095)); +#148289 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148290 = ORIENTED_EDGE('',*,*,#148291,.T.); +#148291 = EDGE_CURVE('',#148283,#148292,#148294,.T.); +#148292 = VERTEX_POINT('',#148293); +#148293 = CARTESIAN_POINT('',(-6.575,3.054385716286,-1.308627623938)); +#148294 = LINE('',#148295,#148296); +#148295 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148296 = VECTOR('',#148297,1.); +#148297 = DIRECTION('',(1.,-0.,-0.)); +#148298 = ORIENTED_EDGE('',*,*,#148299,.F.); +#148299 = EDGE_CURVE('',#148255,#148292,#148300,.T.); +#148300 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148301,#148302,#148303, + #148304),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#148301 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.430903154896)); +#148302 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.379747065413)); +#148303 = CARTESIAN_POINT('',(-6.575,3.082875083194,-1.338988555095)); +#148304 = CARTESIAN_POINT('',(-6.575,3.054385716286,-1.308627623938)); +#148305 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148306,#148307) + ,(#148308,#148309) + ,(#148310,#148311) + ,(#148312,#148313 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148306 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.430903154896)); +#148307 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.430903154896)); +#148308 = CARTESIAN_POINT('',(-6.576,3.097119766646,-1.379747065413)); +#148309 = CARTESIAN_POINT('',(-6.575,3.097119766646,-1.379747065413)); +#148310 = CARTESIAN_POINT('',(-6.576,3.082875083194,-1.338988555095)); +#148311 = CARTESIAN_POINT('',(-6.575,3.082875083194,-1.338988555095)); +#148312 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148313 = CARTESIAN_POINT('',(-6.575,3.054385716286,-1.308627623938)); +#148314 = ADVANCED_FACE('',(#148315),#148342,.F.); +#148315 = FACE_BOUND('',#148316,.F.); +#148316 = EDGE_LOOP('',(#148317,#148318,#148327,#148335)); +#148317 = ORIENTED_EDGE('',*,*,#148291,.F.); +#148318 = ORIENTED_EDGE('',*,*,#148319,.T.); +#148319 = EDGE_CURVE('',#148283,#148320,#148322,.T.); +#148320 = VERTEX_POINT('',#148321); +#148321 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148322 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148323,#148324,#148325, + #148326),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#148323 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148324 = CARTESIAN_POINT('',(-6.576,3.025792373588,-1.278474644365)); +#148325 = CARTESIAN_POINT('',(-6.576,2.988880967558,-1.263502130371)); +#148326 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148327 = ORIENTED_EDGE('',*,*,#148328,.T.); +#148328 = EDGE_CURVE('',#148320,#148329,#148331,.T.); +#148329 = VERTEX_POINT('',#148330); +#148330 = CARTESIAN_POINT('',(-6.575,2.943547522407,-1.263502130371)); +#148331 = LINE('',#148332,#148333); +#148332 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148333 = VECTOR('',#148334,1.); +#148334 = DIRECTION('',(1.,-0.,-0.)); +#148335 = ORIENTED_EDGE('',*,*,#148336,.F.); +#148336 = EDGE_CURVE('',#148292,#148329,#148337,.T.); +#148337 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148338,#148339,#148340, + #148341),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#148338 = CARTESIAN_POINT('',(-6.575,3.054385716286,-1.308627623938)); +#148339 = CARTESIAN_POINT('',(-6.575,3.025792373588,-1.278474644365)); +#148340 = CARTESIAN_POINT('',(-6.575,2.988880967558,-1.263502130371)); +#148341 = CARTESIAN_POINT('',(-6.575,2.943547522407,-1.263502130371)); +#148342 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148343,#148344) + ,(#148345,#148346) + ,(#148347,#148348) + ,(#148349,#148350 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148343 = CARTESIAN_POINT('',(-6.576,3.054385716286,-1.308627623938)); +#148344 = CARTESIAN_POINT('',(-6.575,3.054385716286,-1.308627623938)); +#148345 = CARTESIAN_POINT('',(-6.576,3.025792373588,-1.278474644365)); +#148346 = CARTESIAN_POINT('',(-6.575,3.025792373588,-1.278474644365)); +#148347 = CARTESIAN_POINT('',(-6.576,2.988880967558,-1.263502130371)); +#148348 = CARTESIAN_POINT('',(-6.575,2.988880967558,-1.263502130371)); +#148349 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148350 = CARTESIAN_POINT('',(-6.575,2.943547522407,-1.263502130371)); +#148351 = ADVANCED_FACE('',(#148352),#148379,.F.); +#148352 = FACE_BOUND('',#148353,.F.); +#148353 = EDGE_LOOP('',(#148354,#148355,#148364,#148372)); +#148354 = ORIENTED_EDGE('',*,*,#148328,.F.); +#148355 = ORIENTED_EDGE('',*,*,#148356,.T.); +#148356 = EDGE_CURVE('',#148320,#148357,#148359,.T.); +#148357 = VERTEX_POINT('',#148358); +#148358 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.287624514027)); +#148359 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148360,#148361,#148362, + #148363),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#148360 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148361 = CARTESIAN_POINT('',(-6.576,2.908715632211,-1.263502130371)); +#148362 = CARTESIAN_POINT('',(-6.576,2.876795064179,-1.271404290534)); +#148363 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.287624514027)); +#148364 = ORIENTED_EDGE('',*,*,#148365,.T.); +#148365 = EDGE_CURVE('',#148357,#148366,#148368,.T.); +#148366 = VERTEX_POINT('',#148367); +#148367 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.287624514027)); +#148368 = LINE('',#148369,#148370); +#148369 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.287624514027)); +#148370 = VECTOR('',#148371,1.); +#148371 = DIRECTION('',(1.,-0.,-0.)); +#148372 = ORIENTED_EDGE('',*,*,#148373,.F.); +#148373 = EDGE_CURVE('',#148329,#148366,#148374,.T.); +#148374 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148375,#148376,#148377, + #148378),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#148375 = CARTESIAN_POINT('',(-6.575,2.943547522407,-1.263502130371)); +#148376 = CARTESIAN_POINT('',(-6.575,2.908715632211,-1.263502130371)); +#148377 = CARTESIAN_POINT('',(-6.575,2.876795064179,-1.271404290534)); +#148378 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.287624514027)); +#148379 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148380,#148381) + ,(#148382,#148383) + ,(#148384,#148385) + ,(#148386,#148387 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148380 = CARTESIAN_POINT('',(-6.576,2.943547522407,-1.263502130371)); +#148381 = CARTESIAN_POINT('',(-6.575,2.943547522407,-1.263502130371)); +#148382 = CARTESIAN_POINT('',(-6.576,2.908715632211,-1.263502130371)); +#148383 = CARTESIAN_POINT('',(-6.575,2.908715632211,-1.263502130371)); +#148384 = CARTESIAN_POINT('',(-6.576,2.876795064179,-1.271404290534)); +#148385 = CARTESIAN_POINT('',(-6.575,2.876795064179,-1.271404290534)); +#148386 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.287624514027)); +#148387 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.287624514027)); +#148388 = ADVANCED_FACE('',(#148389),#148414,.F.); +#148389 = FACE_BOUND('',#148390,.T.); +#148390 = EDGE_LOOP('',(#148391,#148399,#148407,#148413)); +#148391 = ORIENTED_EDGE('',*,*,#148392,.T.); +#148392 = EDGE_CURVE('',#148366,#148393,#148395,.T.); +#148393 = VERTEX_POINT('',#148394); +#148394 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.232725296047)); +#148395 = LINE('',#148396,#148397); +#148396 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.232725296047)); +#148397 = VECTOR('',#148398,1.); +#148398 = DIRECTION('',(-0.,7.899581905747E-15,1.)); +#148399 = ORIENTED_EDGE('',*,*,#148400,.F.); +#148400 = EDGE_CURVE('',#148401,#148393,#148403,.T.); +#148401 = VERTEX_POINT('',#148402); +#148402 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148403 = LINE('',#148404,#148405); +#148404 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148405 = VECTOR('',#148406,1.); +#148406 = DIRECTION('',(1.,-0.,-0.)); +#148407 = ORIENTED_EDGE('',*,*,#148408,.F.); +#148408 = EDGE_CURVE('',#148357,#148401,#148409,.T.); +#148409 = LINE('',#148410,#148411); +#148410 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148411 = VECTOR('',#148412,1.); +#148412 = DIRECTION('',(-0.,7.899581905747E-15,1.)); +#148413 = ORIENTED_EDGE('',*,*,#148365,.T.); +#148414 = PLANE('',#148415); +#148415 = AXIS2_PLACEMENT_3D('',#148416,#148417,#148418); +#148416 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148417 = DIRECTION('',(0.,1.,-7.899581905747E-15)); +#148418 = DIRECTION('',(0.,7.899581905747E-15,1.)); +#148419 = ADVANCED_FACE('',(#148420),#148447,.F.); +#148420 = FACE_BOUND('',#148421,.F.); +#148421 = EDGE_LOOP('',(#148422,#148423,#148432,#148440)); +#148422 = ORIENTED_EDGE('',*,*,#148400,.F.); +#148423 = ORIENTED_EDGE('',*,*,#148424,.T.); +#148424 = EDGE_CURVE('',#148401,#148425,#148427,.T.); +#148425 = VERTEX_POINT('',#148426); +#148426 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148427 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148428,#148429,#148430, + #148431),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#148428 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148429 = CARTESIAN_POINT('',(-6.576,2.87305193568,-1.221703862133)); +#148430 = CARTESIAN_POINT('',(-6.576,2.905180455295,-1.216089169385)); +#148431 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148432 = ORIENTED_EDGE('',*,*,#148433,.T.); +#148433 = EDGE_CURVE('',#148425,#148434,#148436,.T.); +#148434 = VERTEX_POINT('',#148435); +#148435 = CARTESIAN_POINT('',(-6.575,2.944067401365,-1.216089169385)); +#148436 = LINE('',#148437,#148438); +#148437 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148438 = VECTOR('',#148439,1.); +#148439 = DIRECTION('',(1.,-0.,-0.)); +#148440 = ORIENTED_EDGE('',*,*,#148441,.F.); +#148441 = EDGE_CURVE('',#148393,#148434,#148442,.T.); +#148442 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148443,#148444,#148445, + #148446),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#148443 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.232725296047)); +#148444 = CARTESIAN_POINT('',(-6.575,2.87305193568,-1.221703862133)); +#148445 = CARTESIAN_POINT('',(-6.575,2.905180455295,-1.216089169385)); +#148446 = CARTESIAN_POINT('',(-6.575,2.944067401365,-1.216089169385)); +#148447 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148448,#148449) + ,(#148450,#148451) + ,(#148452,#148453) + ,(#148454,#148455 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148448 = CARTESIAN_POINT('',(-6.576,2.847681842522,-1.232725296047)); +#148449 = CARTESIAN_POINT('',(-6.575,2.847681842522,-1.232725296047)); +#148450 = CARTESIAN_POINT('',(-6.576,2.87305193568,-1.221703862133)); +#148451 = CARTESIAN_POINT('',(-6.575,2.87305193568,-1.221703862133)); +#148452 = CARTESIAN_POINT('',(-6.576,2.905180455295,-1.216089169385)); +#148453 = CARTESIAN_POINT('',(-6.575,2.905180455295,-1.216089169385)); +#148454 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148455 = CARTESIAN_POINT('',(-6.575,2.944067401365,-1.216089169385)); +#148456 = ADVANCED_FACE('',(#148457),#148484,.F.); +#148457 = FACE_BOUND('',#148458,.F.); +#148458 = EDGE_LOOP('',(#148459,#148460,#148469,#148477)); +#148459 = ORIENTED_EDGE('',*,*,#148433,.F.); +#148460 = ORIENTED_EDGE('',*,*,#148461,.T.); +#148461 = EDGE_CURVE('',#148425,#148462,#148464,.T.); +#148462 = VERTEX_POINT('',#148463); +#148463 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148464 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148465,#148466,#148467, + #148468),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#148465 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148466 = CARTESIAN_POINT('',(-6.576,3.004477336303,-1.216089169385)); +#148467 = CARTESIAN_POINT('',(-6.576,3.054281740494,-1.236052521378)); +#148468 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148469 = ORIENTED_EDGE('',*,*,#148470,.T.); +#148470 = EDGE_CURVE('',#148462,#148471,#148473,.T.); +#148471 = VERTEX_POINT('',#148472); +#148472 = CARTESIAN_POINT('',(-6.575,3.09348061394,-1.275979225366)); +#148473 = LINE('',#148474,#148475); +#148474 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148475 = VECTOR('',#148476,1.); +#148476 = DIRECTION('',(1.,-0.,-0.)); +#148477 = ORIENTED_EDGE('',*,*,#148478,.F.); +#148478 = EDGE_CURVE('',#148434,#148471,#148479,.T.); +#148479 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148480,#148481,#148482, + #148483),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#148480 = CARTESIAN_POINT('',(-6.575,2.944067401365,-1.216089169385)); +#148481 = CARTESIAN_POINT('',(-6.575,3.004477336303,-1.216089169385)); +#148482 = CARTESIAN_POINT('',(-6.575,3.054281740494,-1.236052521378)); +#148483 = CARTESIAN_POINT('',(-6.575,3.09348061394,-1.275979225366)); +#148484 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148485,#148486) + ,(#148487,#148488) + ,(#148489,#148490) + ,(#148491,#148492 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148485 = CARTESIAN_POINT('',(-6.576,2.944067401365,-1.216089169385)); +#148486 = CARTESIAN_POINT('',(-6.575,2.944067401365,-1.216089169385)); +#148487 = CARTESIAN_POINT('',(-6.576,3.004477336303,-1.216089169385)); +#148488 = CARTESIAN_POINT('',(-6.575,3.004477336303,-1.216089169385)); +#148489 = CARTESIAN_POINT('',(-6.576,3.054281740494,-1.236052521378)); +#148490 = CARTESIAN_POINT('',(-6.575,3.054281740494,-1.236052521378)); +#148491 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148492 = CARTESIAN_POINT('',(-6.575,3.09348061394,-1.275979225366)); +#148493 = ADVANCED_FACE('',(#148494),#148521,.F.); +#148494 = FACE_BOUND('',#148495,.F.); +#148495 = EDGE_LOOP('',(#148496,#148497,#148506,#148514)); +#148496 = ORIENTED_EDGE('',*,*,#148470,.F.); +#148497 = ORIENTED_EDGE('',*,*,#148498,.T.); +#148498 = EDGE_CURVE('',#148462,#148499,#148501,.T.); +#148499 = VERTEX_POINT('',#148500); +#148500 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148501 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148502,#148503,#148504, + #148505),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#148502 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148503 = CARTESIAN_POINT('',(-6.576,3.132679487385,-1.315905929352)); +#148504 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.368517679919)); +#148505 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148506 = ORIENTED_EDGE('',*,*,#148507,.T.); +#148507 = EDGE_CURVE('',#148499,#148508,#148510,.T.); +#148508 = VERTEX_POINT('',#148509); +#148509 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.434022428647)); +#148510 = LINE('',#148511,#148512); +#148511 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148512 = VECTOR('',#148513,1.); +#148513 = DIRECTION('',(1.,-0.,-0.)); +#148514 = ORIENTED_EDGE('',*,*,#148515,.F.); +#148515 = EDGE_CURVE('',#148471,#148508,#148516,.T.); +#148516 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148517,#148518,#148519, + #148520),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#148517 = CARTESIAN_POINT('',(-6.575,3.09348061394,-1.275979225366)); +#148518 = CARTESIAN_POINT('',(-6.575,3.132679487385,-1.315905929352)); +#148519 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.368517679919)); +#148520 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.434022428647)); +#148521 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148522,#148523) + ,(#148524,#148525) + ,(#148526,#148527) + ,(#148528,#148529 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148522 = CARTESIAN_POINT('',(-6.576,3.09348061394,-1.275979225366)); +#148523 = CARTESIAN_POINT('',(-6.575,3.09348061394,-1.275979225366)); +#148524 = CARTESIAN_POINT('',(-6.576,3.132679487385,-1.315905929352)); +#148525 = CARTESIAN_POINT('',(-6.575,3.132679487385,-1.315905929352)); +#148526 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.368517679919)); +#148527 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.368517679919)); +#148528 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148529 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.434022428647)); +#148530 = ADVANCED_FACE('',(#148531),#148558,.F.); +#148531 = FACE_BOUND('',#148532,.F.); +#148532 = EDGE_LOOP('',(#148533,#148534,#148543,#148551)); +#148533 = ORIENTED_EDGE('',*,*,#148507,.F.); +#148534 = ORIENTED_EDGE('',*,*,#148535,.T.); +#148535 = EDGE_CURVE('',#148499,#148536,#148538,.T.); +#148536 = VERTEX_POINT('',#148537); +#148537 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148538 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148539,#148540,#148541, + #148542),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#148539 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148540 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.494952242543)); +#148541 = CARTESIAN_POINT('',(-6.576,3.13486297901,-1.544028816192)); +#148542 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148543 = ORIENTED_EDGE('',*,*,#148544,.T.); +#148544 = EDGE_CURVE('',#148536,#148545,#148547,.T.); +#148545 = VERTEX_POINT('',#148546); +#148546 = CARTESIAN_POINT('',(-6.575,3.100031088813,-1.581044198013)); +#148547 = LINE('',#148548,#148549); +#148548 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148549 = VECTOR('',#148550,1.); +#148550 = DIRECTION('',(1.,-0.,-0.)); +#148551 = ORIENTED_EDGE('',*,*,#148552,.F.); +#148552 = EDGE_CURVE('',#148508,#148545,#148553,.T.); +#148553 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148554,#148555,#148556, + #148557),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#148554 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.434022428647)); +#148555 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.494952242543)); +#148556 = CARTESIAN_POINT('',(-6.575,3.13486297901,-1.544028816192)); +#148557 = CARTESIAN_POINT('',(-6.575,3.100031088813,-1.581044198013)); +#148558 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148559,#148560) + ,(#148561,#148562) + ,(#148563,#148564) + ,(#148565,#148566 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148559 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.434022428647)); +#148560 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.434022428647)); +#148561 = CARTESIAN_POINT('',(-6.576,3.152226936212,-1.494952242543)); +#148562 = CARTESIAN_POINT('',(-6.575,3.152226936212,-1.494952242543)); +#148563 = CARTESIAN_POINT('',(-6.576,3.13486297901,-1.544028816192)); +#148564 = CARTESIAN_POINT('',(-6.575,3.13486297901,-1.544028816192)); +#148565 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148566 = CARTESIAN_POINT('',(-6.575,3.100031088813,-1.581044198013)); +#148567 = ADVANCED_FACE('',(#148568),#148586,.F.); +#148568 = FACE_BOUND('',#148569,.F.); +#148569 = EDGE_LOOP('',(#148570,#148571,#148578,#148579)); +#148570 = ORIENTED_EDGE('',*,*,#148544,.F.); +#148571 = ORIENTED_EDGE('',*,*,#148572,.T.); +#148572 = EDGE_CURVE('',#148536,#148094,#148573,.T.); +#148573 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148574,#148575,#148576, + #148577),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#148574 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148575 = CARTESIAN_POINT('',(-6.576,3.065199198616,-1.618059579833)); +#148576 = CARTESIAN_POINT('',(-6.576,3.018618043965,-1.636567270745)); +#148577 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148578 = ORIENTED_EDGE('',*,*,#148093,.T.); +#148579 = ORIENTED_EDGE('',*,*,#148580,.F.); +#148580 = EDGE_CURVE('',#148545,#148096,#148581,.T.); +#148581 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#148582,#148583,#148584, + #148585),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#148582 = CARTESIAN_POINT('',(-6.575,3.100031088813,-1.581044198013)); +#148583 = CARTESIAN_POINT('',(-6.575,3.065199198616,-1.618059579833)); +#148584 = CARTESIAN_POINT('',(-6.575,3.018618043965,-1.636567270745)); +#148585 = CARTESIAN_POINT('',(-6.575,2.96028762486,-1.636567270745)); +#148586 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#148587,#148588) + ,(#148589,#148590) + ,(#148591,#148592) + ,(#148593,#148594 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#148587 = CARTESIAN_POINT('',(-6.576,3.100031088813,-1.581044198013)); +#148588 = CARTESIAN_POINT('',(-6.575,3.100031088813,-1.581044198013)); +#148589 = CARTESIAN_POINT('',(-6.576,3.065199198616,-1.618059579833)); +#148590 = CARTESIAN_POINT('',(-6.575,3.065199198616,-1.618059579833)); +#148591 = CARTESIAN_POINT('',(-6.576,3.018618043965,-1.636567270745)); +#148592 = CARTESIAN_POINT('',(-6.575,3.018618043965,-1.636567270745)); +#148593 = CARTESIAN_POINT('',(-6.576,2.96028762486,-1.636567270745)); +#148594 = CARTESIAN_POINT('',(-6.575,2.96028762486,-1.636567270745)); +#148595 = ADVANCED_FACE('',(#148596),#148612,.T.); +#148596 = FACE_BOUND('',#148597,.T.); +#148597 = EDGE_LOOP('',(#148598,#148599,#148600,#148601,#148602,#148603, + #148604,#148605,#148606,#148607,#148608,#148609,#148610,#148611)); +#148598 = ORIENTED_EDGE('',*,*,#148103,.T.); +#148599 = ORIENTED_EDGE('',*,*,#148155,.T.); +#148600 = ORIENTED_EDGE('',*,*,#148171,.T.); +#148601 = ORIENTED_EDGE('',*,*,#148208,.T.); +#148602 = ORIENTED_EDGE('',*,*,#148245,.T.); +#148603 = ORIENTED_EDGE('',*,*,#148282,.T.); +#148604 = ORIENTED_EDGE('',*,*,#148319,.T.); +#148605 = ORIENTED_EDGE('',*,*,#148356,.T.); +#148606 = ORIENTED_EDGE('',*,*,#148408,.T.); +#148607 = ORIENTED_EDGE('',*,*,#148424,.T.); +#148608 = ORIENTED_EDGE('',*,*,#148461,.T.); +#148609 = ORIENTED_EDGE('',*,*,#148498,.T.); +#148610 = ORIENTED_EDGE('',*,*,#148535,.T.); +#148611 = ORIENTED_EDGE('',*,*,#148572,.T.); +#148612 = PLANE('',#148613); +#148613 = AXIS2_PLACEMENT_3D('',#148614,#148615,#148616); +#148614 = CARTESIAN_POINT('',(-6.576,2.898292059099,-1.630640650622)); +#148615 = DIRECTION('',(-1.,0.,0.)); +#148616 = DIRECTION('',(0.,0.,1.)); +#148617 = ADVANCED_FACE('',(#148618),#148634,.F.); +#148618 = FACE_BOUND('',#148619,.T.); +#148619 = EDGE_LOOP('',(#148620,#148621,#148622,#148623,#148624,#148625, + #148626,#148627,#148628,#148629,#148630,#148631,#148632,#148633)); +#148620 = ORIENTED_EDGE('',*,*,#148120,.F.); +#148621 = ORIENTED_EDGE('',*,*,#148580,.F.); +#148622 = ORIENTED_EDGE('',*,*,#148552,.F.); +#148623 = ORIENTED_EDGE('',*,*,#148515,.F.); +#148624 = ORIENTED_EDGE('',*,*,#148478,.F.); +#148625 = ORIENTED_EDGE('',*,*,#148441,.F.); +#148626 = ORIENTED_EDGE('',*,*,#148392,.F.); +#148627 = ORIENTED_EDGE('',*,*,#148373,.F.); +#148628 = ORIENTED_EDGE('',*,*,#148336,.F.); +#148629 = ORIENTED_EDGE('',*,*,#148299,.F.); +#148630 = ORIENTED_EDGE('',*,*,#148262,.F.); +#148631 = ORIENTED_EDGE('',*,*,#148225,.F.); +#148632 = ORIENTED_EDGE('',*,*,#148188,.F.); +#148633 = ORIENTED_EDGE('',*,*,#148139,.F.); +#148634 = PLANE('',#148635); +#148635 = AXIS2_PLACEMENT_3D('',#148636,#148637,#148638); +#148636 = CARTESIAN_POINT('',(-6.575,2.898292059099,-1.630640650622)); +#148637 = DIRECTION('',(-1.,0.,0.)); +#148638 = DIRECTION('',(0.,0.,1.)); +#148639 = MANIFOLD_SOLID_BREP('',#148640); +#148640 = CLOSED_SHELL('',(#148641,#148681,#148712,#148743,#148774, + #148805,#148836,#148867,#148898,#148929,#148960,#148991,#149013, + #149033)); +#148641 = ADVANCED_FACE('',(#148642),#148676,.F.); +#148642 = FACE_BOUND('',#148643,.T.); +#148643 = EDGE_LOOP('',(#148644,#148654,#148662,#148670)); +#148644 = ORIENTED_EDGE('',*,*,#148645,.T.); +#148645 = EDGE_CURVE('',#148646,#148648,#148650,.T.); +#148646 = VERTEX_POINT('',#148647); +#148647 = CARTESIAN_POINT('',(-6.575,2.547503732082,-1.629704868496)); +#148648 = VERTEX_POINT('',#148649); +#148649 = CARTESIAN_POINT('',(-6.575,2.547503732082,-1.583331665429)); +#148650 = LINE('',#148651,#148652); +#148651 = CARTESIAN_POINT('',(-6.575,2.547503732082,-1.583331665429)); +#148652 = VECTOR('',#148653,1.); +#148653 = DIRECTION('',(-0.,9.35197140388E-15,1.)); +#148654 = ORIENTED_EDGE('',*,*,#148655,.F.); +#148655 = EDGE_CURVE('',#148656,#148648,#148658,.T.); +#148656 = VERTEX_POINT('',#148657); +#148657 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.583331665429)); +#148658 = LINE('',#148659,#148660); +#148659 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.583331665429)); +#148660 = VECTOR('',#148661,1.); +#148661 = DIRECTION('',(1.,-0.,-0.)); +#148662 = ORIENTED_EDGE('',*,*,#148663,.F.); +#148663 = EDGE_CURVE('',#148664,#148656,#148666,.T.); +#148664 = VERTEX_POINT('',#148665); +#148665 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.629704868496)); +#148666 = LINE('',#148667,#148668); +#148667 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.583331665429)); +#148668 = VECTOR('',#148669,1.); +#148669 = DIRECTION('',(-0.,9.35197140388E-15,1.)); +#148670 = ORIENTED_EDGE('',*,*,#148671,.T.); +#148671 = EDGE_CURVE('',#148664,#148646,#148672,.T.); +#148672 = LINE('',#148673,#148674); +#148673 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.629704868496)); +#148674 = VECTOR('',#148675,1.); +#148675 = DIRECTION('',(1.,-0.,-0.)); +#148676 = PLANE('',#148677); +#148677 = AXIS2_PLACEMENT_3D('',#148678,#148679,#148680); +#148678 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.583331665429)); +#148679 = DIRECTION('',(0.,1.,-9.35197140388E-15)); +#148680 = DIRECTION('',(0.,9.35197140388E-15,1.)); +#148681 = ADVANCED_FACE('',(#148682),#148707,.F.); +#148682 = FACE_BOUND('',#148683,.T.); +#148683 = EDGE_LOOP('',(#148684,#148692,#148700,#148706)); +#148684 = ORIENTED_EDGE('',*,*,#148685,.T.); +#148685 = EDGE_CURVE('',#148648,#148686,#148688,.T.); +#148686 = VERTEX_POINT('',#148687); +#148687 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.583331665429)); +#148688 = LINE('',#148689,#148690); +#148689 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.583331665429)); +#148690 = VECTOR('',#148691,1.); +#148691 = DIRECTION('',(-0.,1.,-1.043396934619E-14)); +#148692 = ORIENTED_EDGE('',*,*,#148693,.F.); +#148693 = EDGE_CURVE('',#148694,#148686,#148696,.T.); +#148694 = VERTEX_POINT('',#148695); +#148695 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.583331665429)); +#148696 = LINE('',#148697,#148698); +#148697 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.583331665429)); +#148698 = VECTOR('',#148699,1.); +#148699 = DIRECTION('',(1.,-0.,-0.)); +#148700 = ORIENTED_EDGE('',*,*,#148701,.F.); +#148701 = EDGE_CURVE('',#148656,#148694,#148702,.T.); +#148702 = LINE('',#148703,#148704); +#148703 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.583331665429)); +#148704 = VECTOR('',#148705,1.); +#148705 = DIRECTION('',(-0.,1.,-1.043396934619E-14)); +#148706 = ORIENTED_EDGE('',*,*,#148655,.T.); +#148707 = PLANE('',#148708); +#148708 = AXIS2_PLACEMENT_3D('',#148709,#148710,#148711); +#148709 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.583331665429)); +#148710 = DIRECTION('',(0.,-1.043396934619E-14,-1.)); +#148711 = DIRECTION('',(0.,1.,-1.043396934619E-14)); +#148712 = ADVANCED_FACE('',(#148713),#148738,.F.); +#148713 = FACE_BOUND('',#148714,.T.); +#148714 = EDGE_LOOP('',(#148715,#148723,#148731,#148737)); +#148715 = ORIENTED_EDGE('',*,*,#148716,.T.); +#148716 = EDGE_CURVE('',#148686,#148717,#148719,.T.); +#148717 = VERTEX_POINT('',#148718); +#148718 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.446499523642)); +#148719 = LINE('',#148720,#148721); +#148720 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.446499523642)); +#148721 = VECTOR('',#148722,1.); +#148722 = DIRECTION('',(-0.,1.26777484685E-14,1.)); +#148723 = ORIENTED_EDGE('',*,*,#148724,.F.); +#148724 = EDGE_CURVE('',#148725,#148717,#148727,.T.); +#148725 = VERTEX_POINT('',#148726); +#148726 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.446499523642)); +#148727 = LINE('',#148728,#148729); +#148728 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.446499523642)); +#148729 = VECTOR('',#148730,1.); +#148730 = DIRECTION('',(1.,-0.,-0.)); +#148731 = ORIENTED_EDGE('',*,*,#148732,.F.); +#148732 = EDGE_CURVE('',#148694,#148725,#148733,.T.); +#148733 = LINE('',#148734,#148735); +#148734 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.446499523642)); +#148735 = VECTOR('',#148736,1.); +#148736 = DIRECTION('',(-0.,1.26777484685E-14,1.)); +#148737 = ORIENTED_EDGE('',*,*,#148693,.T.); +#148738 = PLANE('',#148739); +#148739 = AXIS2_PLACEMENT_3D('',#148740,#148741,#148742); +#148740 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.446499523642)); +#148741 = DIRECTION('',(0.,1.,-1.26777484685E-14)); +#148742 = DIRECTION('',(0.,1.26777484685E-14,1.)); +#148743 = ADVANCED_FACE('',(#148744),#148769,.F.); +#148744 = FACE_BOUND('',#148745,.T.); +#148745 = EDGE_LOOP('',(#148746,#148754,#148762,#148768)); +#148746 = ORIENTED_EDGE('',*,*,#148747,.T.); +#148747 = EDGE_CURVE('',#148717,#148748,#148750,.T.); +#148748 = VERTEX_POINT('',#148749); +#148749 = CARTESIAN_POINT('',(-6.575,2.568298890408,-1.446499523642)); +#148750 = LINE('',#148751,#148752); +#148751 = CARTESIAN_POINT('',(-6.575,2.568298890408,-1.446499523642)); +#148752 = VECTOR('',#148753,1.); +#148753 = DIRECTION('',(-0.,-1.,1.192560184743E-14)); +#148754 = ORIENTED_EDGE('',*,*,#148755,.F.); +#148755 = EDGE_CURVE('',#148756,#148748,#148758,.T.); +#148756 = VERTEX_POINT('',#148757); +#148757 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.446499523642)); +#148758 = LINE('',#148759,#148760); +#148759 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.446499523642)); +#148760 = VECTOR('',#148761,1.); +#148761 = DIRECTION('',(1.,-0.,-0.)); +#148762 = ORIENTED_EDGE('',*,*,#148763,.F.); +#148763 = EDGE_CURVE('',#148725,#148756,#148764,.T.); +#148764 = LINE('',#148765,#148766); +#148765 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.446499523642)); +#148766 = VECTOR('',#148767,1.); +#148767 = DIRECTION('',(-0.,-1.,1.192560184743E-14)); +#148768 = ORIENTED_EDGE('',*,*,#148724,.T.); +#148769 = PLANE('',#148770); +#148770 = AXIS2_PLACEMENT_3D('',#148771,#148772,#148773); +#148771 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.446499523642)); +#148772 = DIRECTION('',(0.,1.192560184743E-14,1.)); +#148773 = DIRECTION('',(0.,-1.,1.192560184743E-14)); +#148774 = ADVANCED_FACE('',(#148775),#148800,.F.); +#148775 = FACE_BOUND('',#148776,.T.); +#148776 = EDGE_LOOP('',(#148777,#148785,#148793,#148799)); +#148777 = ORIENTED_EDGE('',*,*,#148778,.T.); +#148778 = EDGE_CURVE('',#148748,#148779,#148781,.T.); +#148779 = VERTEX_POINT('',#148780); +#148780 = CARTESIAN_POINT('',(-6.575,2.568298890408,-1.399918368992)); +#148781 = LINE('',#148782,#148783); +#148782 = CARTESIAN_POINT('',(-6.575,2.568298890408,-1.399918368992)); +#148783 = VECTOR('',#148784,1.); +#148784 = DIRECTION('',(-0.,-0.,1.)); +#148785 = ORIENTED_EDGE('',*,*,#148786,.F.); +#148786 = EDGE_CURVE('',#148787,#148779,#148789,.T.); +#148787 = VERTEX_POINT('',#148788); +#148788 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.399918368992)); +#148789 = LINE('',#148790,#148791); +#148790 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.399918368992)); +#148791 = VECTOR('',#148792,1.); +#148792 = DIRECTION('',(1.,-0.,-0.)); +#148793 = ORIENTED_EDGE('',*,*,#148794,.F.); +#148794 = EDGE_CURVE('',#148756,#148787,#148795,.T.); +#148795 = LINE('',#148796,#148797); +#148796 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.399918368992)); +#148797 = VECTOR('',#148798,1.); +#148798 = DIRECTION('',(-0.,-0.,1.)); +#148799 = ORIENTED_EDGE('',*,*,#148755,.T.); +#148800 = PLANE('',#148801); +#148801 = AXIS2_PLACEMENT_3D('',#148802,#148803,#148804); +#148802 = CARTESIAN_POINT('',(-6.576,2.568298890408,-1.399918368992)); +#148803 = DIRECTION('',(0.,1.,0.)); +#148804 = DIRECTION('',(0.,-0.,1.)); +#148805 = ADVANCED_FACE('',(#148806),#148831,.F.); +#148806 = FACE_BOUND('',#148807,.T.); +#148807 = EDGE_LOOP('',(#148808,#148816,#148824,#148830)); +#148808 = ORIENTED_EDGE('',*,*,#148809,.T.); +#148809 = EDGE_CURVE('',#148779,#148810,#148812,.T.); +#148810 = VERTEX_POINT('',#148811); +#148811 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.399918368992)); +#148812 = LINE('',#148813,#148814); +#148813 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.399918368992)); +#148814 = VECTOR('',#148815,1.); +#148815 = DIRECTION('',(-0.,1.,-1.04349016165E-14)); +#148816 = ORIENTED_EDGE('',*,*,#148817,.F.); +#148817 = EDGE_CURVE('',#148818,#148810,#148820,.T.); +#148818 = VERTEX_POINT('',#148819); +#148819 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.399918368992)); +#148820 = LINE('',#148821,#148822); +#148821 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.399918368992)); +#148822 = VECTOR('',#148823,1.); +#148823 = DIRECTION('',(1.,-0.,-0.)); +#148824 = ORIENTED_EDGE('',*,*,#148825,.F.); +#148825 = EDGE_CURVE('',#148787,#148818,#148826,.T.); +#148826 = LINE('',#148827,#148828); +#148827 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.399918368992)); +#148828 = VECTOR('',#148829,1.); +#148829 = DIRECTION('',(-0.,1.,-1.04349016165E-14)); +#148830 = ORIENTED_EDGE('',*,*,#148786,.T.); +#148831 = PLANE('',#148832); +#148832 = AXIS2_PLACEMENT_3D('',#148833,#148834,#148835); +#148833 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.399918368992)); +#148834 = DIRECTION('',(0.,-1.04349016165E-14,-1.)); +#148835 = DIRECTION('',(0.,1.,-1.04349016165E-14)); +#148836 = ADVANCED_FACE('',(#148837),#148862,.F.); +#148837 = FACE_BOUND('',#148838,.T.); +#148838 = EDGE_LOOP('',(#148839,#148847,#148855,#148861)); +#148839 = ORIENTED_EDGE('',*,*,#148840,.T.); +#148840 = EDGE_CURVE('',#148810,#148841,#148843,.T.); +#148841 = VERTEX_POINT('',#148842); +#148842 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.269740677867)); +#148843 = LINE('',#148844,#148845); +#148844 = CARTESIAN_POINT('',(-6.575,2.7137610229,-1.269740677867)); +#148845 = VECTOR('',#148846,1.); +#148846 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#148847 = ORIENTED_EDGE('',*,*,#148848,.F.); +#148848 = EDGE_CURVE('',#148849,#148841,#148851,.T.); +#148849 = VERTEX_POINT('',#148850); +#148850 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.269740677867)); +#148851 = LINE('',#148852,#148853); +#148852 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.269740677867)); +#148853 = VECTOR('',#148854,1.); +#148854 = DIRECTION('',(1.,-0.,-0.)); +#148855 = ORIENTED_EDGE('',*,*,#148856,.F.); +#148856 = EDGE_CURVE('',#148818,#148849,#148857,.T.); +#148857 = LINE('',#148858,#148859); +#148858 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.269740677867)); +#148859 = VECTOR('',#148860,1.); +#148860 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#148861 = ORIENTED_EDGE('',*,*,#148817,.T.); +#148862 = PLANE('',#148863); +#148863 = AXIS2_PLACEMENT_3D('',#148864,#148865,#148866); +#148864 = CARTESIAN_POINT('',(-6.576,2.7137610229,-1.269740677867)); +#148865 = DIRECTION('',(0.,1.,-9.994359215826E-15)); +#148866 = DIRECTION('',(0.,9.994359215826E-15,1.)); +#148867 = ADVANCED_FACE('',(#148868),#148893,.F.); +#148868 = FACE_BOUND('',#148869,.T.); +#148869 = EDGE_LOOP('',(#148870,#148878,#148886,#148892)); +#148870 = ORIENTED_EDGE('',*,*,#148871,.T.); +#148871 = EDGE_CURVE('',#148841,#148872,#148874,.T.); +#148872 = VERTEX_POINT('',#148873); +#148873 = CARTESIAN_POINT('',(-6.575,2.556757577537,-1.269740677867)); +#148874 = LINE('',#148875,#148876); +#148875 = CARTESIAN_POINT('',(-6.575,2.556757577537,-1.269740677867)); +#148876 = VECTOR('',#148877,1.); +#148877 = DIRECTION('',(-0.,-1.,1.104895164534E-14)); +#148878 = ORIENTED_EDGE('',*,*,#148879,.F.); +#148879 = EDGE_CURVE('',#148880,#148872,#148882,.T.); +#148880 = VERTEX_POINT('',#148881); +#148881 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.269740677867)); +#148882 = LINE('',#148883,#148884); +#148883 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.269740677867)); +#148884 = VECTOR('',#148885,1.); +#148885 = DIRECTION('',(1.,-0.,-0.)); +#148886 = ORIENTED_EDGE('',*,*,#148887,.F.); +#148887 = EDGE_CURVE('',#148849,#148880,#148888,.T.); +#148888 = LINE('',#148889,#148890); +#148889 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.269740677867)); +#148890 = VECTOR('',#148891,1.); +#148891 = DIRECTION('',(-0.,-1.,1.104895164534E-14)); +#148892 = ORIENTED_EDGE('',*,*,#148848,.T.); +#148893 = PLANE('',#148894); +#148894 = AXIS2_PLACEMENT_3D('',#148895,#148896,#148897); +#148895 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.269740677867)); +#148896 = DIRECTION('',(0.,1.104895164534E-14,1.)); +#148897 = DIRECTION('',(0.,-1.,1.104895164534E-14)); +#148898 = ADVANCED_FACE('',(#148899),#148924,.F.); +#148899 = FACE_BOUND('',#148900,.T.); +#148900 = EDGE_LOOP('',(#148901,#148909,#148917,#148923)); +#148901 = ORIENTED_EDGE('',*,*,#148902,.T.); +#148902 = EDGE_CURVE('',#148872,#148903,#148905,.T.); +#148903 = VERTEX_POINT('',#148904); +#148904 = CARTESIAN_POINT('',(-6.575,2.556757577537,-1.222951571634)); +#148905 = LINE('',#148906,#148907); +#148906 = CARTESIAN_POINT('',(-6.575,2.556757577537,-1.222951571634)); +#148907 = VECTOR('',#148908,1.); +#148908 = DIRECTION('',(-0.,9.268842769272E-15,1.)); +#148909 = ORIENTED_EDGE('',*,*,#148910,.F.); +#148910 = EDGE_CURVE('',#148911,#148903,#148913,.T.); +#148911 = VERTEX_POINT('',#148912); +#148912 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.222951571634)); +#148913 = LINE('',#148914,#148915); +#148914 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.222951571634)); +#148915 = VECTOR('',#148916,1.); +#148916 = DIRECTION('',(1.,-0.,-0.)); +#148917 = ORIENTED_EDGE('',*,*,#148918,.F.); +#148918 = EDGE_CURVE('',#148880,#148911,#148919,.T.); +#148919 = LINE('',#148920,#148921); +#148920 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.222951571634)); +#148921 = VECTOR('',#148922,1.); +#148922 = DIRECTION('',(-0.,9.268842769272E-15,1.)); +#148923 = ORIENTED_EDGE('',*,*,#148879,.T.); +#148924 = PLANE('',#148925); +#148925 = AXIS2_PLACEMENT_3D('',#148926,#148927,#148928); +#148926 = CARTESIAN_POINT('',(-6.576,2.556757577537,-1.222951571634)); +#148927 = DIRECTION('',(0.,1.,-9.268842769272E-15)); +#148928 = DIRECTION('',(0.,9.268842769272E-15,1.)); +#148929 = ADVANCED_FACE('',(#148930),#148955,.F.); +#148930 = FACE_BOUND('',#148931,.T.); +#148931 = EDGE_LOOP('',(#148932,#148940,#148948,#148954)); +#148932 = ORIENTED_EDGE('',*,*,#148933,.T.); +#148933 = EDGE_CURVE('',#148903,#148934,#148936,.T.); +#148934 = VERTEX_POINT('',#148935); +#148935 = CARTESIAN_POINT('',(-6.575,2.766268797674,-1.222951571634)); +#148936 = LINE('',#148937,#148938); +#148937 = CARTESIAN_POINT('',(-6.575,2.766268797674,-1.222951571634)); +#148938 = VECTOR('',#148939,1.); +#148939 = DIRECTION('',(-0.,1.,-9.314841988857E-15)); +#148940 = ORIENTED_EDGE('',*,*,#148941,.F.); +#148941 = EDGE_CURVE('',#148942,#148934,#148944,.T.); +#148942 = VERTEX_POINT('',#148943); +#148943 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.222951571634)); +#148944 = LINE('',#148945,#148946); +#148945 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.222951571634)); +#148946 = VECTOR('',#148947,1.); +#148947 = DIRECTION('',(1.,-0.,-0.)); +#148948 = ORIENTED_EDGE('',*,*,#148949,.F.); +#148949 = EDGE_CURVE('',#148911,#148942,#148950,.T.); +#148950 = LINE('',#148951,#148952); +#148951 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.222951571634)); +#148952 = VECTOR('',#148953,1.); +#148953 = DIRECTION('',(-0.,1.,-9.314841988857E-15)); +#148954 = ORIENTED_EDGE('',*,*,#148910,.T.); +#148955 = PLANE('',#148956); +#148956 = AXIS2_PLACEMENT_3D('',#148957,#148958,#148959); +#148957 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.222951571634)); +#148958 = DIRECTION('',(0.,-9.314841988857E-15,-1.)); +#148959 = DIRECTION('',(0.,1.,-9.314841988857E-15)); +#148960 = ADVANCED_FACE('',(#148961),#148986,.F.); +#148961 = FACE_BOUND('',#148962,.T.); +#148962 = EDGE_LOOP('',(#148963,#148971,#148979,#148985)); +#148963 = ORIENTED_EDGE('',*,*,#148964,.T.); +#148964 = EDGE_CURVE('',#148934,#148965,#148967,.T.); +#148965 = VERTEX_POINT('',#148966); +#148966 = CARTESIAN_POINT('',(-6.575,2.766268797674,-1.629704868496)); +#148967 = LINE('',#148968,#148969); +#148968 = CARTESIAN_POINT('',(-6.575,2.766268797674,-1.629704868496)); +#148969 = VECTOR('',#148970,1.); +#148970 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#148971 = ORIENTED_EDGE('',*,*,#148972,.F.); +#148972 = EDGE_CURVE('',#148973,#148965,#148975,.T.); +#148973 = VERTEX_POINT('',#148974); +#148974 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.629704868496)); +#148975 = LINE('',#148976,#148977); +#148976 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.629704868496)); +#148977 = VECTOR('',#148978,1.); +#148978 = DIRECTION('',(1.,-0.,-0.)); +#148979 = ORIENTED_EDGE('',*,*,#148980,.F.); +#148980 = EDGE_CURVE('',#148942,#148973,#148981,.T.); +#148981 = LINE('',#148982,#148983); +#148982 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.629704868496)); +#148983 = VECTOR('',#148984,1.); +#148984 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#148985 = ORIENTED_EDGE('',*,*,#148941,.T.); +#148986 = PLANE('',#148987); +#148987 = AXIS2_PLACEMENT_3D('',#148988,#148989,#148990); +#148988 = CARTESIAN_POINT('',(-6.576,2.766268797674,-1.629704868496)); +#148989 = DIRECTION('',(0.,-1.,1.066201238783E-14)); +#148990 = DIRECTION('',(0.,-1.066201238783E-14,-1.)); +#148991 = ADVANCED_FACE('',(#148992),#149008,.F.); +#148992 = FACE_BOUND('',#148993,.T.); +#148993 = EDGE_LOOP('',(#148994,#149000,#149001,#149007)); +#148994 = ORIENTED_EDGE('',*,*,#148995,.T.); +#148995 = EDGE_CURVE('',#148965,#148646,#148996,.T.); +#148996 = LINE('',#148997,#148998); +#148997 = CARTESIAN_POINT('',(-6.575,2.547503732082,-1.629704868496)); +#148998 = VECTOR('',#148999,1.); +#148999 = DIRECTION('',(-0.,-1.,1.090322521566E-14)); +#149000 = ORIENTED_EDGE('',*,*,#148671,.F.); +#149001 = ORIENTED_EDGE('',*,*,#149002,.F.); +#149002 = EDGE_CURVE('',#148973,#148664,#149003,.T.); +#149003 = LINE('',#149004,#149005); +#149004 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.629704868496)); +#149005 = VECTOR('',#149006,1.); +#149006 = DIRECTION('',(-0.,-1.,1.090322521566E-14)); +#149007 = ORIENTED_EDGE('',*,*,#148972,.T.); +#149008 = PLANE('',#149009); +#149009 = AXIS2_PLACEMENT_3D('',#149010,#149011,#149012); +#149010 = CARTESIAN_POINT('',(-6.576,2.547503732082,-1.629704868496)); +#149011 = DIRECTION('',(0.,1.090322521566E-14,1.)); +#149012 = DIRECTION('',(0.,-1.,1.090322521566E-14)); +#149013 = ADVANCED_FACE('',(#149014),#149028,.F.); +#149014 = FACE_BOUND('',#149015,.T.); +#149015 = EDGE_LOOP('',(#149016,#149017,#149018,#149019,#149020,#149021, + #149022,#149023,#149024,#149025,#149026,#149027)); +#149016 = ORIENTED_EDGE('',*,*,#148663,.T.); +#149017 = ORIENTED_EDGE('',*,*,#148701,.T.); +#149018 = ORIENTED_EDGE('',*,*,#148732,.T.); +#149019 = ORIENTED_EDGE('',*,*,#148763,.T.); +#149020 = ORIENTED_EDGE('',*,*,#148794,.T.); +#149021 = ORIENTED_EDGE('',*,*,#148825,.T.); +#149022 = ORIENTED_EDGE('',*,*,#148856,.T.); +#149023 = ORIENTED_EDGE('',*,*,#148887,.T.); +#149024 = ORIENTED_EDGE('',*,*,#148918,.T.); +#149025 = ORIENTED_EDGE('',*,*,#148949,.T.); +#149026 = ORIENTED_EDGE('',*,*,#148980,.T.); +#149027 = ORIENTED_EDGE('',*,*,#149002,.T.); +#149028 = PLANE('',#149029); +#149029 = AXIS2_PLACEMENT_3D('',#149030,#149031,#149032); +#149030 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#149031 = DIRECTION('',(1.,0.,0.)); +#149032 = DIRECTION('',(0.,0.,-1.)); +#149033 = ADVANCED_FACE('',(#149034),#149048,.T.); +#149034 = FACE_BOUND('',#149035,.T.); +#149035 = EDGE_LOOP('',(#149036,#149037,#149038,#149039,#149040,#149041, + #149042,#149043,#149044,#149045,#149046,#149047)); +#149036 = ORIENTED_EDGE('',*,*,#148645,.F.); +#149037 = ORIENTED_EDGE('',*,*,#148995,.F.); +#149038 = ORIENTED_EDGE('',*,*,#148964,.F.); +#149039 = ORIENTED_EDGE('',*,*,#148933,.F.); +#149040 = ORIENTED_EDGE('',*,*,#148902,.F.); +#149041 = ORIENTED_EDGE('',*,*,#148871,.F.); +#149042 = ORIENTED_EDGE('',*,*,#148840,.F.); +#149043 = ORIENTED_EDGE('',*,*,#148809,.F.); +#149044 = ORIENTED_EDGE('',*,*,#148778,.F.); +#149045 = ORIENTED_EDGE('',*,*,#148747,.F.); +#149046 = ORIENTED_EDGE('',*,*,#148716,.F.); +#149047 = ORIENTED_EDGE('',*,*,#148685,.F.); +#149048 = PLANE('',#149049); +#149049 = AXIS2_PLACEMENT_3D('',#149050,#149051,#149052); +#149050 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#149051 = DIRECTION('',(1.,0.,0.)); +#149052 = DIRECTION('',(0.,0.,-1.)); +#149053 = MANIFOLD_SOLID_BREP('',#149054); +#149054 = CLOSED_SHELL('',(#149055,#149185,#149315,#149337,#149358, + #149379,#149400,#149421,#149438,#149450,#149472,#149489,#149506, + #149527,#149548,#149569)); +#149055 = ADVANCED_FACE('',(#149056,#149118),#149180,.T.); +#149056 = FACE_BOUND('',#149057,.T.); +#149057 = EDGE_LOOP('',(#149058,#149068,#149077,#149086,#149095,#149104, + #149112)); +#149058 = ORIENTED_EDGE('',*,*,#149059,.T.); +#149059 = EDGE_CURVE('',#149060,#149062,#149064,.T.); +#149060 = VERTEX_POINT('',#149061); +#149061 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.629704868496)); +#149062 = VERTEX_POINT('',#149063); +#149063 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149064 = LINE('',#149065,#149066); +#149065 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149066 = VECTOR('',#149067,1.); +#149067 = DIRECTION('',(-0.,-1.,9.690936910115E-15)); +#149068 = ORIENTED_EDGE('',*,*,#149069,.T.); +#149069 = EDGE_CURVE('',#149062,#149070,#149072,.T.); +#149070 = VERTEX_POINT('',#149071); +#149071 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149072 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149073,#149074,#149075, + #149076),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#149073 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149074 = CARTESIAN_POINT('',(-6.576,2.294426655251,-1.629704868496)); +#149075 = CARTESIAN_POINT('',(-6.576,2.241710928892,-1.610781274419)); +#149076 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149077 = ORIENTED_EDGE('',*,*,#149078,.T.); +#149078 = EDGE_CURVE('',#149070,#149079,#149081,.T.); +#149079 = VERTEX_POINT('',#149080); +#149080 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149081 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149082,#149083,#149084, + #149085),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#149082 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149083 = CARTESIAN_POINT('',(-6.576,2.159985956669,-1.534670994945)); +#149084 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.484138760211)); +#149085 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149086 = ORIENTED_EDGE('',*,*,#149087,.T.); +#149087 = EDGE_CURVE('',#149079,#149088,#149090,.T.); +#149088 = VERTEX_POINT('',#149089); +#149089 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149090 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149091,#149092,#149093, + #149094),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149091 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149092 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.360823471338)); +#149093 = CARTESIAN_POINT('',(-6.576,2.159985956669,-1.312786655604)); +#149094 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149095 = ORIENTED_EDGE('',*,*,#149096,.T.); +#149096 = EDGE_CURVE('',#149088,#149097,#149099,.T.); +#149097 = VERTEX_POINT('',#149098); +#149098 = CARTESIAN_POINT('',(-6.576,2.354628638603,-1.222951571634)); +#149099 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149100,#149101,#149102, + #149103),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#149100 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149101 = CARTESIAN_POINT('',(-6.576,2.241710928893,-1.240835407793)); +#149102 = CARTESIAN_POINT('',(-6.576,2.292970994167,-1.222951571634)); +#149103 = CARTESIAN_POINT('',(-6.576,2.354628638603,-1.222951571634)); +#149104 = ORIENTED_EDGE('',*,*,#149105,.T.); +#149105 = EDGE_CURVE('',#149097,#149106,#149108,.T.); +#149106 = VERTEX_POINT('',#149107); +#149107 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.222951571634)); +#149108 = LINE('',#149109,#149110); +#149109 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.222951571634)); +#149110 = VECTOR('',#149111,1.); +#149111 = DIRECTION('',(-0.,1.,-9.343591501086E-15)); +#149112 = ORIENTED_EDGE('',*,*,#149113,.T.); +#149113 = EDGE_CURVE('',#149106,#149060,#149114,.T.); +#149114 = LINE('',#149115,#149116); +#149115 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.629704868496)); +#149116 = VECTOR('',#149117,1.); +#149117 = DIRECTION('',(-0.,-9.59581114905E-15,-1.)); +#149118 = FACE_BOUND('',#149119,.T.); +#149119 = EDGE_LOOP('',(#149120,#149130,#149138,#149147,#149156,#149165, + #149174)); +#149120 = ORIENTED_EDGE('',*,*,#149121,.F.); +#149121 = EDGE_CURVE('',#149122,#149124,#149126,.T.); +#149122 = VERTEX_POINT('',#149123); +#149123 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.269740677867)); +#149124 = VERTEX_POINT('',#149125); +#149125 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.583331665429)); +#149126 = LINE('',#149127,#149128); +#149127 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.269740677867)); +#149128 = VECTOR('',#149129,1.); +#149129 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#149130 = ORIENTED_EDGE('',*,*,#149131,.F.); +#149131 = EDGE_CURVE('',#149132,#149122,#149134,.T.); +#149132 = VERTEX_POINT('',#149133); +#149133 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149134 = LINE('',#149135,#149136); +#149135 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149136 = VECTOR('',#149137,1.); +#149137 = DIRECTION('',(0.,1.,-1.058624174201E-14)); +#149138 = ORIENTED_EDGE('',*,*,#149139,.F.); +#149139 = EDGE_CURVE('',#149140,#149132,#149142,.T.); +#149140 = VERTEX_POINT('',#149141); +#149141 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149142 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149143,#149144,#149145, + #149146),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#149143 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149144 = CARTESIAN_POINT('',(-6.576,2.269056562094,-1.282425724446)); +#149145 = CARTESIAN_POINT('',(-6.576,2.308255435539,-1.269740677867)); +#149146 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149147 = ORIENTED_EDGE('',*,*,#149148,.F.); +#149148 = EDGE_CURVE('',#149149,#149140,#149151,.T.); +#149149 = VERTEX_POINT('',#149150); +#149150 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149151 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149152,#149153,#149154, + #149155),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#149152 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149153 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.37184490525)); +#149154 = CARTESIAN_POINT('',(-6.576,2.209582409279,-1.333581813928)); +#149155 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149156 = ORIENTED_EDGE('',*,*,#149157,.F.); +#149157 = EDGE_CURVE('',#149158,#149149,#149160,.T.); +#149158 = VERTEX_POINT('',#149159); +#149159 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149160 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149161,#149162,#149163, + #149164),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149161 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149162 = CARTESIAN_POINT('',(-6.576,2.20916650611,-1.512836078702)); +#149163 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.473325277883)); +#149164 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149165 = ORIENTED_EDGE('',*,*,#149166,.F.); +#149166 = EDGE_CURVE('',#149167,#149158,#149169,.T.); +#149167 = VERTEX_POINT('',#149168); +#149168 = CARTESIAN_POINT('',(-6.576,2.359099597644,-1.583331665429)); +#149169 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149170,#149171,#149172, + #149173),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#149170 = CARTESIAN_POINT('',(-6.576,2.359099597644,-1.583331665429)); +#149171 = CARTESIAN_POINT('',(-6.576,2.307423629204,-1.583331665429)); +#149172 = CARTESIAN_POINT('',(-6.576,2.267081022049,-1.569190957766)); +#149173 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149174 = ORIENTED_EDGE('',*,*,#149175,.F.); +#149175 = EDGE_CURVE('',#149124,#149167,#149176,.T.); +#149176 = LINE('',#149177,#149178); +#149177 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.583331665429)); +#149178 = VECTOR('',#149179,1.); +#149179 = DIRECTION('',(0.,-1.,1.101490998108E-14)); +#149180 = PLANE('',#149181); +#149181 = AXIS2_PLACEMENT_3D('',#149182,#149183,#149184); +#149182 = CARTESIAN_POINT('',(-6.576,2.26994035632,-1.236390442702)); +#149183 = DIRECTION('',(-1.,-0.,0.)); +#149184 = DIRECTION('',(0.,0.,1.)); +#149185 = ADVANCED_FACE('',(#149186,#149248),#149310,.F.); +#149186 = FACE_BOUND('',#149187,.T.); +#149187 = EDGE_LOOP('',(#149188,#149198,#149206,#149214,#149223,#149232, + #149241)); +#149188 = ORIENTED_EDGE('',*,*,#149189,.F.); +#149189 = EDGE_CURVE('',#149190,#149192,#149194,.T.); +#149190 = VERTEX_POINT('',#149191); +#149191 = CARTESIAN_POINT('',(-6.575,2.470665622065,-1.629704868496)); +#149192 = VERTEX_POINT('',#149193); +#149193 = CARTESIAN_POINT('',(-6.575,2.358787670269,-1.629704868496)); +#149194 = LINE('',#149195,#149196); +#149195 = CARTESIAN_POINT('',(-6.575,2.358787670269,-1.629704868496)); +#149196 = VECTOR('',#149197,1.); +#149197 = DIRECTION('',(-0.,-1.,9.690936910115E-15)); +#149198 = ORIENTED_EDGE('',*,*,#149199,.F.); +#149199 = EDGE_CURVE('',#149200,#149190,#149202,.T.); +#149200 = VERTEX_POINT('',#149201); +#149201 = CARTESIAN_POINT('',(-6.575,2.470665622065,-1.222951571634)); +#149202 = LINE('',#149203,#149204); +#149203 = CARTESIAN_POINT('',(-6.575,2.470665622065,-1.629704868496)); +#149204 = VECTOR('',#149205,1.); +#149205 = DIRECTION('',(-0.,-9.59581114905E-15,-1.)); +#149206 = ORIENTED_EDGE('',*,*,#149207,.F.); +#149207 = EDGE_CURVE('',#149208,#149200,#149210,.T.); +#149208 = VERTEX_POINT('',#149209); +#149209 = CARTESIAN_POINT('',(-6.575,2.354628638603,-1.222951571634)); +#149210 = LINE('',#149211,#149212); +#149211 = CARTESIAN_POINT('',(-6.575,2.470665622065,-1.222951571634)); +#149212 = VECTOR('',#149213,1.); +#149213 = DIRECTION('',(-0.,1.,-9.343591501086E-15)); +#149214 = ORIENTED_EDGE('',*,*,#149215,.F.); +#149215 = EDGE_CURVE('',#149216,#149208,#149218,.T.); +#149216 = VERTEX_POINT('',#149217); +#149217 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.276811031698)); +#149218 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149219,#149220,#149221, + #149222),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#149219 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.276811031698)); +#149220 = CARTESIAN_POINT('',(-6.575,2.241710928893,-1.240835407793)); +#149221 = CARTESIAN_POINT('',(-6.575,2.292970994167,-1.222951571634)); +#149222 = CARTESIAN_POINT('',(-6.575,2.354628638603,-1.222951571634)); +#149223 = ORIENTED_EDGE('',*,*,#149224,.F.); +#149224 = EDGE_CURVE('',#149225,#149216,#149227,.T.); +#149225 = VERTEX_POINT('',#149226); +#149226 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.421129430482)); +#149227 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149228,#149229,#149230, + #149231),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149228 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.421129430482)); +#149229 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.360823471338)); +#149230 = CARTESIAN_POINT('',(-6.575,2.159985956669,-1.312786655604)); +#149231 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.276811031698)); +#149232 = ORIENTED_EDGE('',*,*,#149233,.F.); +#149233 = EDGE_CURVE('',#149234,#149225,#149236,.T.); +#149234 = VERTEX_POINT('',#149235); +#149235 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.572726134683)); +#149236 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149237,#149238,#149239, + #149240),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#149237 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.572726134683)); +#149238 = CARTESIAN_POINT('',(-6.575,2.159985956669,-1.534670994945)); +#149239 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.484138760211)); +#149240 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.421129430482)); +#149241 = ORIENTED_EDGE('',*,*,#149242,.F.); +#149242 = EDGE_CURVE('',#149192,#149234,#149243,.T.); +#149243 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149244,#149245,#149246, + #149247),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#149244 = CARTESIAN_POINT('',(-6.575,2.358787670269,-1.629704868496)); +#149245 = CARTESIAN_POINT('',(-6.575,2.294426655251,-1.629704868496)); +#149246 = CARTESIAN_POINT('',(-6.575,2.241710928892,-1.610781274419)); +#149247 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.572726134683)); +#149248 = FACE_BOUND('',#149249,.T.); +#149249 = EDGE_LOOP('',(#149250,#149260,#149268,#149276,#149285,#149294, + #149303)); +#149250 = ORIENTED_EDGE('',*,*,#149251,.T.); +#149251 = EDGE_CURVE('',#149252,#149254,#149256,.T.); +#149252 = VERTEX_POINT('',#149253); +#149253 = CARTESIAN_POINT('',(-6.575,2.356708154439,-1.269740677867)); +#149254 = VERTEX_POINT('',#149255); +#149255 = CARTESIAN_POINT('',(-6.575,2.41815784729,-1.269740677867)); +#149256 = LINE('',#149257,#149258); +#149257 = CARTESIAN_POINT('',(-6.575,2.356708154439,-1.269740677867)); +#149258 = VECTOR('',#149259,1.); +#149259 = DIRECTION('',(0.,1.,-1.058624174201E-14)); +#149260 = ORIENTED_EDGE('',*,*,#149261,.T.); +#149261 = EDGE_CURVE('',#149254,#149262,#149264,.T.); +#149262 = VERTEX_POINT('',#149263); +#149263 = CARTESIAN_POINT('',(-6.575,2.41815784729,-1.583331665429)); +#149264 = LINE('',#149265,#149266); +#149265 = CARTESIAN_POINT('',(-6.575,2.41815784729,-1.269740677867)); +#149266 = VECTOR('',#149267,1.); +#149267 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#149268 = ORIENTED_EDGE('',*,*,#149269,.T.); +#149269 = EDGE_CURVE('',#149262,#149270,#149272,.T.); +#149270 = VERTEX_POINT('',#149271); +#149271 = CARTESIAN_POINT('',(-6.575,2.359099597644,-1.583331665429)); +#149272 = LINE('',#149273,#149274); +#149273 = CARTESIAN_POINT('',(-6.575,2.41815784729,-1.583331665429)); +#149274 = VECTOR('',#149275,1.); +#149275 = DIRECTION('',(0.,-1.,1.101490998108E-14)); +#149276 = ORIENTED_EDGE('',*,*,#149277,.T.); +#149277 = EDGE_CURVE('',#149270,#149278,#149280,.T.); +#149278 = VERTEX_POINT('',#149279); +#149279 = CARTESIAN_POINT('',(-6.575,2.238175751976,-1.540909542444)); +#149280 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149281,#149282,#149283, + #149284),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#149281 = CARTESIAN_POINT('',(-6.575,2.359099597644,-1.583331665429)); +#149282 = CARTESIAN_POINT('',(-6.575,2.307423629204,-1.583331665429)); +#149283 = CARTESIAN_POINT('',(-6.575,2.267081022049,-1.569190957766)); +#149284 = CARTESIAN_POINT('',(-6.575,2.238175751976,-1.540909542444)); +#149285 = ORIENTED_EDGE('',*,*,#149286,.T.); +#149286 = EDGE_CURVE('',#149278,#149287,#149289,.T.); +#149287 = VERTEX_POINT('',#149288); +#149288 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.422585091566)); +#149289 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149290,#149291,#149292, + #149293),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149290 = CARTESIAN_POINT('',(-6.575,2.238175751976,-1.540909542444)); +#149291 = CARTESIAN_POINT('',(-6.575,2.20916650611,-1.512836078702)); +#149292 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.473325277883)); +#149293 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.422585091566)); +#149294 = ORIENTED_EDGE('',*,*,#149295,.T.); +#149295 = EDGE_CURVE('',#149287,#149296,#149298,.T.); +#149296 = VERTEX_POINT('',#149297); +#149297 = CARTESIAN_POINT('',(-6.575,2.239319485685,-1.308003769188)); +#149298 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149299,#149300,#149301, + #149302),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#149299 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.422585091566)); +#149300 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.37184490525)); +#149301 = CARTESIAN_POINT('',(-6.575,2.209582409279,-1.333581813928)); +#149302 = CARTESIAN_POINT('',(-6.575,2.239319485685,-1.308003769188)); +#149303 = ORIENTED_EDGE('',*,*,#149304,.T.); +#149304 = EDGE_CURVE('',#149296,#149252,#149305,.T.); +#149305 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149306,#149307,#149308, + #149309),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#149306 = CARTESIAN_POINT('',(-6.575,2.239319485685,-1.308003769188)); +#149307 = CARTESIAN_POINT('',(-6.575,2.269056562094,-1.282425724446)); +#149308 = CARTESIAN_POINT('',(-6.575,2.308255435539,-1.269740677867)); +#149309 = CARTESIAN_POINT('',(-6.575,2.356708154439,-1.269740677867)); +#149310 = PLANE('',#149311); +#149311 = AXIS2_PLACEMENT_3D('',#149312,#149313,#149314); +#149312 = CARTESIAN_POINT('',(-6.575,2.26994035632,-1.236390442702)); +#149313 = DIRECTION('',(-1.,-0.,0.)); +#149314 = DIRECTION('',(0.,0.,1.)); +#149315 = ADVANCED_FACE('',(#149316),#149332,.F.); +#149316 = FACE_BOUND('',#149317,.T.); +#149317 = EDGE_LOOP('',(#149318,#149319,#149325,#149326)); +#149318 = ORIENTED_EDGE('',*,*,#149189,.T.); +#149319 = ORIENTED_EDGE('',*,*,#149320,.F.); +#149320 = EDGE_CURVE('',#149062,#149192,#149321,.T.); +#149321 = LINE('',#149322,#149323); +#149322 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149323 = VECTOR('',#149324,1.); +#149324 = DIRECTION('',(1.,-0.,-0.)); +#149325 = ORIENTED_EDGE('',*,*,#149059,.F.); +#149326 = ORIENTED_EDGE('',*,*,#149327,.T.); +#149327 = EDGE_CURVE('',#149060,#149190,#149328,.T.); +#149328 = LINE('',#149329,#149330); +#149329 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.629704868496)); +#149330 = VECTOR('',#149331,1.); +#149331 = DIRECTION('',(1.,-0.,-0.)); +#149332 = PLANE('',#149333); +#149333 = AXIS2_PLACEMENT_3D('',#149334,#149335,#149336); +#149334 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149335 = DIRECTION('',(0.,9.690936910115E-15,1.)); +#149336 = DIRECTION('',(0.,-1.,9.690936910115E-15)); +#149337 = ADVANCED_FACE('',(#149338),#149349,.F.); +#149338 = FACE_BOUND('',#149339,.F.); +#149339 = EDGE_LOOP('',(#149340,#149341,#149342,#149348)); +#149340 = ORIENTED_EDGE('',*,*,#149320,.F.); +#149341 = ORIENTED_EDGE('',*,*,#149069,.T.); +#149342 = ORIENTED_EDGE('',*,*,#149343,.T.); +#149343 = EDGE_CURVE('',#149070,#149234,#149344,.T.); +#149344 = LINE('',#149345,#149346); +#149345 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149346 = VECTOR('',#149347,1.); +#149347 = DIRECTION('',(1.,-0.,-0.)); +#149348 = ORIENTED_EDGE('',*,*,#149242,.F.); +#149349 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149350,#149351) + ,(#149352,#149353) + ,(#149354,#149355) + ,(#149356,#149357 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149350 = CARTESIAN_POINT('',(-6.576,2.358787670269,-1.629704868496)); +#149351 = CARTESIAN_POINT('',(-6.575,2.358787670269,-1.629704868496)); +#149352 = CARTESIAN_POINT('',(-6.576,2.294426655251,-1.629704868496)); +#149353 = CARTESIAN_POINT('',(-6.575,2.294426655251,-1.629704868496)); +#149354 = CARTESIAN_POINT('',(-6.576,2.241710928892,-1.610781274419)); +#149355 = CARTESIAN_POINT('',(-6.575,2.241710928892,-1.610781274419)); +#149356 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149357 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.572726134683)); +#149358 = ADVANCED_FACE('',(#149359),#149370,.F.); +#149359 = FACE_BOUND('',#149360,.F.); +#149360 = EDGE_LOOP('',(#149361,#149362,#149363,#149369)); +#149361 = ORIENTED_EDGE('',*,*,#149343,.F.); +#149362 = ORIENTED_EDGE('',*,*,#149078,.T.); +#149363 = ORIENTED_EDGE('',*,*,#149364,.T.); +#149364 = EDGE_CURVE('',#149079,#149225,#149365,.T.); +#149365 = LINE('',#149366,#149367); +#149366 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149367 = VECTOR('',#149368,1.); +#149368 = DIRECTION('',(1.,-0.,-0.)); +#149369 = ORIENTED_EDGE('',*,*,#149233,.F.); +#149370 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149371,#149372) + ,(#149373,#149374) + ,(#149375,#149376) + ,(#149377,#149378 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149371 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.572726134683)); +#149372 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.572726134683)); +#149373 = CARTESIAN_POINT('',(-6.576,2.159985956669,-1.534670994945)); +#149374 = CARTESIAN_POINT('',(-6.575,2.159985956669,-1.534670994945)); +#149375 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.484138760211)); +#149376 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.484138760211)); +#149377 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149378 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.421129430482)); +#149379 = ADVANCED_FACE('',(#149380),#149391,.F.); +#149380 = FACE_BOUND('',#149381,.F.); +#149381 = EDGE_LOOP('',(#149382,#149383,#149384,#149390)); +#149382 = ORIENTED_EDGE('',*,*,#149364,.F.); +#149383 = ORIENTED_EDGE('',*,*,#149087,.T.); +#149384 = ORIENTED_EDGE('',*,*,#149385,.T.); +#149385 = EDGE_CURVE('',#149088,#149216,#149386,.T.); +#149386 = LINE('',#149387,#149388); +#149387 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149388 = VECTOR('',#149389,1.); +#149389 = DIRECTION('',(1.,-0.,-0.)); +#149390 = ORIENTED_EDGE('',*,*,#149224,.F.); +#149391 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149392,#149393) + ,(#149394,#149395) + ,(#149396,#149397) + ,(#149398,#149399 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149392 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.421129430482)); +#149393 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.421129430482)); +#149394 = CARTESIAN_POINT('',(-6.576,2.139502725719,-1.360823471338)); +#149395 = CARTESIAN_POINT('',(-6.575,2.139502725719,-1.360823471338)); +#149396 = CARTESIAN_POINT('',(-6.576,2.159985956669,-1.312786655604)); +#149397 = CARTESIAN_POINT('',(-6.575,2.159985956669,-1.312786655604)); +#149398 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149399 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.276811031698)); +#149400 = ADVANCED_FACE('',(#149401),#149412,.F.); +#149401 = FACE_BOUND('',#149402,.F.); +#149402 = EDGE_LOOP('',(#149403,#149404,#149405,#149411)); +#149403 = ORIENTED_EDGE('',*,*,#149385,.F.); +#149404 = ORIENTED_EDGE('',*,*,#149096,.T.); +#149405 = ORIENTED_EDGE('',*,*,#149406,.T.); +#149406 = EDGE_CURVE('',#149097,#149208,#149407,.T.); +#149407 = LINE('',#149408,#149409); +#149408 = CARTESIAN_POINT('',(-6.576,2.354628638603,-1.222951571634)); +#149409 = VECTOR('',#149410,1.); +#149410 = DIRECTION('',(1.,-0.,-0.)); +#149411 = ORIENTED_EDGE('',*,*,#149215,.F.); +#149412 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149413,#149414) + ,(#149415,#149416) + ,(#149417,#149418) + ,(#149419,#149420 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149413 = CARTESIAN_POINT('',(-6.576,2.200848442781,-1.276811031698)); +#149414 = CARTESIAN_POINT('',(-6.575,2.200848442781,-1.276811031698)); +#149415 = CARTESIAN_POINT('',(-6.576,2.241710928893,-1.240835407793)); +#149416 = CARTESIAN_POINT('',(-6.575,2.241710928893,-1.240835407793)); +#149417 = CARTESIAN_POINT('',(-6.576,2.292970994167,-1.222951571634)); +#149418 = CARTESIAN_POINT('',(-6.575,2.292970994167,-1.222951571634)); +#149419 = CARTESIAN_POINT('',(-6.576,2.354628638603,-1.222951571634)); +#149420 = CARTESIAN_POINT('',(-6.575,2.354628638603,-1.222951571634)); +#149421 = ADVANCED_FACE('',(#149422),#149433,.F.); +#149422 = FACE_BOUND('',#149423,.T.); +#149423 = EDGE_LOOP('',(#149424,#149425,#149431,#149432)); +#149424 = ORIENTED_EDGE('',*,*,#149207,.T.); +#149425 = ORIENTED_EDGE('',*,*,#149426,.F.); +#149426 = EDGE_CURVE('',#149106,#149200,#149427,.T.); +#149427 = LINE('',#149428,#149429); +#149428 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.222951571634)); +#149429 = VECTOR('',#149430,1.); +#149430 = DIRECTION('',(1.,-0.,-0.)); +#149431 = ORIENTED_EDGE('',*,*,#149105,.F.); +#149432 = ORIENTED_EDGE('',*,*,#149406,.T.); +#149433 = PLANE('',#149434); +#149434 = AXIS2_PLACEMENT_3D('',#149435,#149436,#149437); +#149435 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.222951571634)); +#149436 = DIRECTION('',(0.,-9.343591501086E-15,-1.)); +#149437 = DIRECTION('',(0.,1.,-9.343591501086E-15)); +#149438 = ADVANCED_FACE('',(#149439),#149445,.F.); +#149439 = FACE_BOUND('',#149440,.T.); +#149440 = EDGE_LOOP('',(#149441,#149442,#149443,#149444)); +#149441 = ORIENTED_EDGE('',*,*,#149199,.T.); +#149442 = ORIENTED_EDGE('',*,*,#149327,.F.); +#149443 = ORIENTED_EDGE('',*,*,#149113,.F.); +#149444 = ORIENTED_EDGE('',*,*,#149426,.T.); +#149445 = PLANE('',#149446); +#149446 = AXIS2_PLACEMENT_3D('',#149447,#149448,#149449); +#149447 = CARTESIAN_POINT('',(-6.576,2.470665622065,-1.629704868496)); +#149448 = DIRECTION('',(0.,-1.,9.59581114905E-15)); +#149449 = DIRECTION('',(0.,-9.59581114905E-15,-1.)); +#149450 = ADVANCED_FACE('',(#149451),#149467,.T.); +#149451 = FACE_BOUND('',#149452,.T.); +#149452 = EDGE_LOOP('',(#149453,#149454,#149460,#149461)); +#149453 = ORIENTED_EDGE('',*,*,#149251,.F.); +#149454 = ORIENTED_EDGE('',*,*,#149455,.F.); +#149455 = EDGE_CURVE('',#149132,#149252,#149456,.T.); +#149456 = LINE('',#149457,#149458); +#149457 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149458 = VECTOR('',#149459,1.); +#149459 = DIRECTION('',(1.,-0.,-0.)); +#149460 = ORIENTED_EDGE('',*,*,#149131,.T.); +#149461 = ORIENTED_EDGE('',*,*,#149462,.T.); +#149462 = EDGE_CURVE('',#149122,#149254,#149463,.T.); +#149463 = LINE('',#149464,#149465); +#149464 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.269740677867)); +#149465 = VECTOR('',#149466,1.); +#149466 = DIRECTION('',(1.,-0.,-0.)); +#149467 = PLANE('',#149468); +#149468 = AXIS2_PLACEMENT_3D('',#149469,#149470,#149471); +#149469 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149470 = DIRECTION('',(0.,-1.058624174201E-14,-1.)); +#149471 = DIRECTION('',(0.,1.,-1.058624174201E-14)); +#149472 = ADVANCED_FACE('',(#149473),#149484,.T.); +#149473 = FACE_BOUND('',#149474,.T.); +#149474 = EDGE_LOOP('',(#149475,#149476,#149477,#149478)); +#149475 = ORIENTED_EDGE('',*,*,#149261,.F.); +#149476 = ORIENTED_EDGE('',*,*,#149462,.F.); +#149477 = ORIENTED_EDGE('',*,*,#149121,.T.); +#149478 = ORIENTED_EDGE('',*,*,#149479,.T.); +#149479 = EDGE_CURVE('',#149124,#149262,#149480,.T.); +#149480 = LINE('',#149481,#149482); +#149481 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.583331665429)); +#149482 = VECTOR('',#149483,1.); +#149483 = DIRECTION('',(1.,-0.,-0.)); +#149484 = PLANE('',#149485); +#149485 = AXIS2_PLACEMENT_3D('',#149486,#149487,#149488); +#149486 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.269740677867)); +#149487 = DIRECTION('',(0.,-1.,1.106360542735E-14)); +#149488 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#149489 = ADVANCED_FACE('',(#149490),#149501,.T.); +#149490 = FACE_BOUND('',#149491,.T.); +#149491 = EDGE_LOOP('',(#149492,#149493,#149494,#149495)); +#149492 = ORIENTED_EDGE('',*,*,#149269,.F.); +#149493 = ORIENTED_EDGE('',*,*,#149479,.F.); +#149494 = ORIENTED_EDGE('',*,*,#149175,.T.); +#149495 = ORIENTED_EDGE('',*,*,#149496,.T.); +#149496 = EDGE_CURVE('',#149167,#149270,#149497,.T.); +#149497 = LINE('',#149498,#149499); +#149498 = CARTESIAN_POINT('',(-6.576,2.359099597644,-1.583331665429)); +#149499 = VECTOR('',#149500,1.); +#149500 = DIRECTION('',(1.,-0.,-0.)); +#149501 = PLANE('',#149502); +#149502 = AXIS2_PLACEMENT_3D('',#149503,#149504,#149505); +#149503 = CARTESIAN_POINT('',(-6.576,2.41815784729,-1.583331665429)); +#149504 = DIRECTION('',(0.,1.101490998108E-14,1.)); +#149505 = DIRECTION('',(0.,-1.,1.101490998108E-14)); +#149506 = ADVANCED_FACE('',(#149507),#149518,.T.); +#149507 = FACE_BOUND('',#149508,.T.); +#149508 = EDGE_LOOP('',(#149509,#149510,#149511,#149512)); +#149509 = ORIENTED_EDGE('',*,*,#149277,.F.); +#149510 = ORIENTED_EDGE('',*,*,#149496,.F.); +#149511 = ORIENTED_EDGE('',*,*,#149166,.T.); +#149512 = ORIENTED_EDGE('',*,*,#149513,.T.); +#149513 = EDGE_CURVE('',#149158,#149278,#149514,.T.); +#149514 = LINE('',#149515,#149516); +#149515 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149516 = VECTOR('',#149517,1.); +#149517 = DIRECTION('',(1.,-0.,-0.)); +#149518 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149519,#149520) + ,(#149521,#149522) + ,(#149523,#149524) + ,(#149525,#149526 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149519 = CARTESIAN_POINT('',(-6.576,2.359099597644,-1.583331665429)); +#149520 = CARTESIAN_POINT('',(-6.575,2.359099597644,-1.583331665429)); +#149521 = CARTESIAN_POINT('',(-6.576,2.307423629204,-1.583331665429)); +#149522 = CARTESIAN_POINT('',(-6.575,2.307423629204,-1.583331665429)); +#149523 = CARTESIAN_POINT('',(-6.576,2.267081022049,-1.569190957766)); +#149524 = CARTESIAN_POINT('',(-6.575,2.267081022049,-1.569190957766)); +#149525 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149526 = CARTESIAN_POINT('',(-6.575,2.238175751976,-1.540909542444)); +#149527 = ADVANCED_FACE('',(#149528),#149539,.T.); +#149528 = FACE_BOUND('',#149529,.T.); +#149529 = EDGE_LOOP('',(#149530,#149531,#149532,#149533)); +#149530 = ORIENTED_EDGE('',*,*,#149286,.F.); +#149531 = ORIENTED_EDGE('',*,*,#149513,.F.); +#149532 = ORIENTED_EDGE('',*,*,#149157,.T.); +#149533 = ORIENTED_EDGE('',*,*,#149534,.T.); +#149534 = EDGE_CURVE('',#149149,#149287,#149535,.T.); +#149535 = LINE('',#149536,#149537); +#149536 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149537 = VECTOR('',#149538,1.); +#149538 = DIRECTION('',(1.,-0.,-0.)); +#149539 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149540,#149541) + ,(#149542,#149543) + ,(#149544,#149545) + ,(#149546,#149547 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149540 = CARTESIAN_POINT('',(-6.576,2.238175751976,-1.540909542444)); +#149541 = CARTESIAN_POINT('',(-6.575,2.238175751976,-1.540909542444)); +#149542 = CARTESIAN_POINT('',(-6.576,2.20916650611,-1.512836078702)); +#149543 = CARTESIAN_POINT('',(-6.575,2.20916650611,-1.512836078702)); +#149544 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.473325277883)); +#149545 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.473325277883)); +#149546 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149547 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.422585091566)); +#149548 = ADVANCED_FACE('',(#149549),#149560,.T.); +#149549 = FACE_BOUND('',#149550,.T.); +#149550 = EDGE_LOOP('',(#149551,#149552,#149553,#149554)); +#149551 = ORIENTED_EDGE('',*,*,#149295,.F.); +#149552 = ORIENTED_EDGE('',*,*,#149534,.F.); +#149553 = ORIENTED_EDGE('',*,*,#149148,.T.); +#149554 = ORIENTED_EDGE('',*,*,#149555,.T.); +#149555 = EDGE_CURVE('',#149140,#149296,#149556,.T.); +#149556 = LINE('',#149557,#149558); +#149557 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149558 = VECTOR('',#149559,1.); +#149559 = DIRECTION('',(1.,-0.,-0.)); +#149560 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149561,#149562) + ,(#149563,#149564) + ,(#149565,#149566) + ,(#149567,#149568 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149561 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.422585091566)); +#149562 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.422585091566)); +#149563 = CARTESIAN_POINT('',(-6.576,2.194713871073,-1.37184490525)); +#149564 = CARTESIAN_POINT('',(-6.575,2.194713871073,-1.37184490525)); +#149565 = CARTESIAN_POINT('',(-6.576,2.209582409279,-1.333581813928)); +#149566 = CARTESIAN_POINT('',(-6.575,2.209582409279,-1.333581813928)); +#149567 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149568 = CARTESIAN_POINT('',(-6.575,2.239319485685,-1.308003769188)); +#149569 = ADVANCED_FACE('',(#149570),#149576,.T.); +#149570 = FACE_BOUND('',#149571,.T.); +#149571 = EDGE_LOOP('',(#149572,#149573,#149574,#149575)); +#149572 = ORIENTED_EDGE('',*,*,#149304,.F.); +#149573 = ORIENTED_EDGE('',*,*,#149555,.F.); +#149574 = ORIENTED_EDGE('',*,*,#149139,.T.); +#149575 = ORIENTED_EDGE('',*,*,#149455,.T.); +#149576 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#149577,#149578) + ,(#149579,#149580) + ,(#149581,#149582) + ,(#149583,#149584 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#149577 = CARTESIAN_POINT('',(-6.576,2.239319485685,-1.308003769188)); +#149578 = CARTESIAN_POINT('',(-6.575,2.239319485685,-1.308003769188)); +#149579 = CARTESIAN_POINT('',(-6.576,2.269056562094,-1.282425724446)); +#149580 = CARTESIAN_POINT('',(-6.575,2.269056562094,-1.282425724446)); +#149581 = CARTESIAN_POINT('',(-6.576,2.308255435539,-1.269740677867)); +#149582 = CARTESIAN_POINT('',(-6.575,2.308255435539,-1.269740677867)); +#149583 = CARTESIAN_POINT('',(-6.576,2.356708154439,-1.269740677867)); +#149584 = CARTESIAN_POINT('',(-6.575,2.356708154439,-1.269740677867)); +#149585 = MANIFOLD_SOLID_BREP('',#149586); +#149586 = CLOSED_SHELL('',(#149587,#149711,#149835,#149857,#149874, + #149891,#149908,#149925,#149942,#149959,#149971,#149993,#150010, + #150031,#150048,#150069)); +#149587 = ADVANCED_FACE('',(#149588,#149654),#149706,.F.); +#149588 = FACE_BOUND('',#149589,.T.); +#149589 = EDGE_LOOP('',(#149590,#149600,#149608,#149616,#149624,#149632, + #149640,#149648)); +#149590 = ORIENTED_EDGE('',*,*,#149591,.T.); +#149591 = EDGE_CURVE('',#149592,#149594,#149596,.T.); +#149592 = VERTEX_POINT('',#149593); +#149593 = CARTESIAN_POINT('',(-6.576,1.75094519239,-1.629704868496)); +#149594 = VERTEX_POINT('',#149595); +#149595 = CARTESIAN_POINT('',(-6.576,1.905869121922,-1.222951571634)); +#149596 = LINE('',#149597,#149598); +#149597 = CARTESIAN_POINT('',(-6.576,1.905869121922,-1.222951571634)); +#149598 = VECTOR('',#149599,1.); +#149599 = DIRECTION('',(-0.,0.35593572437,0.934510438742)); +#149600 = ORIENTED_EDGE('',*,*,#149601,.T.); +#149601 = EDGE_CURVE('',#149594,#149602,#149604,.T.); +#149602 = VERTEX_POINT('',#149603); +#149603 = CARTESIAN_POINT('',(-6.576,1.962016049403,-1.222951571634)); +#149604 = LINE('',#149605,#149606); +#149605 = CARTESIAN_POINT('',(-6.576,1.962016049403,-1.222951571634)); +#149606 = VECTOR('',#149607,1.); +#149607 = DIRECTION('',(-0.,1.,-1.158605346148E-14)); +#149608 = ORIENTED_EDGE('',*,*,#149609,.T.); +#149609 = EDGE_CURVE('',#149602,#149610,#149612,.T.); +#149610 = VERTEX_POINT('',#149611); +#149611 = CARTESIAN_POINT('',(-6.576,2.116939978932,-1.629704868496)); +#149612 = LINE('',#149613,#149614); +#149613 = CARTESIAN_POINT('',(-6.576,2.116939978932,-1.629704868496)); +#149614 = VECTOR('',#149615,1.); +#149615 = DIRECTION('',(-0.,0.355935724364,-0.934510438744)); +#149616 = ORIENTED_EDGE('',*,*,#149617,.T.); +#149617 = EDGE_CURVE('',#149610,#149618,#149620,.T.); +#149618 = VERTEX_POINT('',#149619); +#149619 = CARTESIAN_POINT('',(-6.576,2.058921487204,-1.629704868496)); +#149620 = LINE('',#149621,#149622); +#149621 = CARTESIAN_POINT('',(-6.576,2.058921487204,-1.629704868496)); +#149622 = VECTOR('',#149623,1.); +#149623 = DIRECTION('',(-0.,-1.,1.121230980184E-14)); +#149624 = ORIENTED_EDGE('',*,*,#149625,.T.); +#149625 = EDGE_CURVE('',#149618,#149626,#149628,.T.); +#149626 = VERTEX_POINT('',#149627); +#149627 = CARTESIAN_POINT('',(-6.576,2.019826589551,-1.51845077145)); +#149628 = LINE('',#149629,#149630); +#149629 = CARTESIAN_POINT('',(-6.576,2.019826589551,-1.51845077145)); +#149630 = VECTOR('',#149631,1.); +#149631 = DIRECTION('',(-0.,-0.33152841835,0.943445233082)); +#149632 = ORIENTED_EDGE('',*,*,#149633,.T.); +#149633 = EDGE_CURVE('',#149626,#149634,#149636,.T.); +#149634 = VERTEX_POINT('',#149635); +#149635 = CARTESIAN_POINT('',(-6.576,1.850450024982,-1.51845077145)); +#149636 = LINE('',#149637,#149638); +#149637 = CARTESIAN_POINT('',(-6.576,1.850450024982,-1.51845077145)); +#149638 = VECTOR('',#149639,1.); +#149639 = DIRECTION('',(-0.,-1.,1.152204211627E-14)); +#149640 = ORIENTED_EDGE('',*,*,#149641,.T.); +#149641 = EDGE_CURVE('',#149634,#149642,#149644,.T.); +#149642 = VERTEX_POINT('',#149643); +#149643 = CARTESIAN_POINT('',(-6.576,1.808963684121,-1.629704868496)); +#149644 = LINE('',#149645,#149646); +#149645 = CARTESIAN_POINT('',(-6.576,1.808963684121,-1.629704868496)); +#149646 = VECTOR('',#149647,1.); +#149647 = DIRECTION('',(-0.,-0.349395479469,-0.936975345954)); +#149648 = ORIENTED_EDGE('',*,*,#149649,.T.); +#149649 = EDGE_CURVE('',#149642,#149592,#149650,.T.); +#149650 = LINE('',#149651,#149652); +#149651 = CARTESIAN_POINT('',(-6.576,1.75094519239,-1.629704868496)); +#149652 = VECTOR('',#149653,1.); +#149653 = DIRECTION('',(-0.,-1.,7.474873200869E-15)); +#149654 = FACE_BOUND('',#149655,.T.); +#149655 = EDGE_LOOP('',(#149656,#149666,#149674,#149683,#149691,#149700) + ); +#149656 = ORIENTED_EDGE('',*,*,#149657,.F.); +#149657 = EDGE_CURVE('',#149658,#149660,#149662,.T.); +#149658 = VERTEX_POINT('',#149659); +#149659 = CARTESIAN_POINT('',(-6.576,2.00319046289,-1.472493471548)); +#149660 = VERTEX_POINT('',#149661); +#149661 = CARTESIAN_POINT('',(-6.576,1.866670248477,-1.472493471548)); +#149662 = LINE('',#149663,#149664); +#149663 = CARTESIAN_POINT('',(-6.576,2.00319046289,-1.472493471548)); +#149664 = VECTOR('',#149665,1.); +#149665 = DIRECTION('',(0.,-1.,1.111837575129E-14)); +#149666 = ORIENTED_EDGE('',*,*,#149667,.F.); +#149667 = EDGE_CURVE('',#149668,#149658,#149670,.T.); +#149668 = VERTEX_POINT('',#149669); +#149669 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#149670 = LINE('',#149671,#149672); +#149671 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#149672 = VECTOR('',#149673,1.); +#149673 = DIRECTION('',(0.,0.338535034314,-0.940953787676)); +#149674 = ORIENTED_EDGE('',*,*,#149675,.F.); +#149675 = EDGE_CURVE('',#149676,#149668,#149678,.T.); +#149676 = VERTEX_POINT('',#149677); +#149677 = CARTESIAN_POINT('',(-6.576,1.93571017412,-1.274939467448)); +#149678 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149679,#149680,#149681, + #149682),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149679 = CARTESIAN_POINT('',(-6.576,1.93571017412,-1.274939467448)); +#149680 = CARTESIAN_POINT('',(-6.576,1.937685714161,-1.287208610861)); +#149681 = CARTESIAN_POINT('',(-6.576,1.939869205786,-1.296774383691)); +#149682 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#149683 = ORIENTED_EDGE('',*,*,#149684,.F.); +#149684 = EDGE_CURVE('',#149685,#149676,#149687,.T.); +#149685 = VERTEX_POINT('',#149686); +#149686 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#149687 = LINE('',#149688,#149689); +#149688 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#149689 = VECTOR('',#149690,1.); +#149690 = DIRECTION('',(0.,1.,-1.737908021195E-13)); +#149691 = ORIENTED_EDGE('',*,*,#149692,.F.); +#149692 = EDGE_CURVE('',#149693,#149685,#149695,.T.); +#149693 = VERTEX_POINT('',#149694); +#149694 = CARTESIAN_POINT('',(-6.576,1.928119941331,-1.303428834356)); +#149695 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149696,#149697,#149698, + #149699),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#149696 = CARTESIAN_POINT('',(-6.576,1.928119941331,-1.303428834356)); +#149697 = CARTESIAN_POINT('',(-6.576,1.930095481373,-1.297814141609)); +#149698 = CARTESIAN_POINT('',(-6.576,1.932174997206,-1.288456320362)); +#149699 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#149700 = ORIENTED_EDGE('',*,*,#149701,.F.); +#149701 = EDGE_CURVE('',#149660,#149693,#149702,.T.); +#149702 = LINE('',#149703,#149704); +#149703 = CARTESIAN_POINT('',(-6.576,1.866670248477,-1.472493471548)); +#149704 = VECTOR('',#149705,1.); +#149705 = DIRECTION('',(0.,0.341603830682,0.939844041777)); +#149706 = PLANE('',#149707); +#149707 = AXIS2_PLACEMENT_3D('',#149708,#149709,#149710); +#149708 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#149709 = DIRECTION('',(1.,0.,0.)); +#149710 = DIRECTION('',(0.,0.,-1.)); +#149711 = ADVANCED_FACE('',(#149712,#149778),#149830,.T.); +#149712 = FACE_BOUND('',#149713,.T.); +#149713 = EDGE_LOOP('',(#149714,#149724,#149732,#149740,#149748,#149756, + #149764,#149772)); +#149714 = ORIENTED_EDGE('',*,*,#149715,.F.); +#149715 = EDGE_CURVE('',#149716,#149718,#149720,.T.); +#149716 = VERTEX_POINT('',#149717); +#149717 = CARTESIAN_POINT('',(-6.575,1.75094519239,-1.629704868496)); +#149718 = VERTEX_POINT('',#149719); +#149719 = CARTESIAN_POINT('',(-6.575,1.905869121922,-1.222951571634)); +#149720 = LINE('',#149721,#149722); +#149721 = CARTESIAN_POINT('',(-6.575,1.905869121922,-1.222951571634)); +#149722 = VECTOR('',#149723,1.); +#149723 = DIRECTION('',(-0.,0.35593572437,0.934510438742)); +#149724 = ORIENTED_EDGE('',*,*,#149725,.F.); +#149725 = EDGE_CURVE('',#149726,#149716,#149728,.T.); +#149726 = VERTEX_POINT('',#149727); +#149727 = CARTESIAN_POINT('',(-6.575,1.808963684121,-1.629704868496)); +#149728 = LINE('',#149729,#149730); +#149729 = CARTESIAN_POINT('',(-6.575,1.75094519239,-1.629704868496)); +#149730 = VECTOR('',#149731,1.); +#149731 = DIRECTION('',(-0.,-1.,7.474873200869E-15)); +#149732 = ORIENTED_EDGE('',*,*,#149733,.F.); +#149733 = EDGE_CURVE('',#149734,#149726,#149736,.T.); +#149734 = VERTEX_POINT('',#149735); +#149735 = CARTESIAN_POINT('',(-6.575,1.850450024982,-1.51845077145)); +#149736 = LINE('',#149737,#149738); +#149737 = CARTESIAN_POINT('',(-6.575,1.808963684121,-1.629704868496)); +#149738 = VECTOR('',#149739,1.); +#149739 = DIRECTION('',(-0.,-0.349395479469,-0.936975345954)); +#149740 = ORIENTED_EDGE('',*,*,#149741,.F.); +#149741 = EDGE_CURVE('',#149742,#149734,#149744,.T.); +#149742 = VERTEX_POINT('',#149743); +#149743 = CARTESIAN_POINT('',(-6.575,2.019826589551,-1.51845077145)); +#149744 = LINE('',#149745,#149746); +#149745 = CARTESIAN_POINT('',(-6.575,1.850450024982,-1.51845077145)); +#149746 = VECTOR('',#149747,1.); +#149747 = DIRECTION('',(-0.,-1.,1.152204211627E-14)); +#149748 = ORIENTED_EDGE('',*,*,#149749,.F.); +#149749 = EDGE_CURVE('',#149750,#149742,#149752,.T.); +#149750 = VERTEX_POINT('',#149751); +#149751 = CARTESIAN_POINT('',(-6.575,2.058921487204,-1.629704868496)); +#149752 = LINE('',#149753,#149754); +#149753 = CARTESIAN_POINT('',(-6.575,2.019826589551,-1.51845077145)); +#149754 = VECTOR('',#149755,1.); +#149755 = DIRECTION('',(-0.,-0.33152841835,0.943445233082)); +#149756 = ORIENTED_EDGE('',*,*,#149757,.F.); +#149757 = EDGE_CURVE('',#149758,#149750,#149760,.T.); +#149758 = VERTEX_POINT('',#149759); +#149759 = CARTESIAN_POINT('',(-6.575,2.116939978932,-1.629704868496)); +#149760 = LINE('',#149761,#149762); +#149761 = CARTESIAN_POINT('',(-6.575,2.058921487204,-1.629704868496)); +#149762 = VECTOR('',#149763,1.); +#149763 = DIRECTION('',(-0.,-1.,1.121230980184E-14)); +#149764 = ORIENTED_EDGE('',*,*,#149765,.F.); +#149765 = EDGE_CURVE('',#149766,#149758,#149768,.T.); +#149766 = VERTEX_POINT('',#149767); +#149767 = CARTESIAN_POINT('',(-6.575,1.962016049403,-1.222951571634)); +#149768 = LINE('',#149769,#149770); +#149769 = CARTESIAN_POINT('',(-6.575,2.116939978932,-1.629704868496)); +#149770 = VECTOR('',#149771,1.); +#149771 = DIRECTION('',(-0.,0.355935724364,-0.934510438744)); +#149772 = ORIENTED_EDGE('',*,*,#149773,.F.); +#149773 = EDGE_CURVE('',#149718,#149766,#149774,.T.); +#149774 = LINE('',#149775,#149776); +#149775 = CARTESIAN_POINT('',(-6.575,1.962016049403,-1.222951571634)); +#149776 = VECTOR('',#149777,1.); +#149777 = DIRECTION('',(-0.,1.,-1.158605346148E-14)); +#149778 = FACE_BOUND('',#149779,.T.); +#149779 = EDGE_LOOP('',(#149780,#149790,#149798,#149806,#149815,#149823) + ); +#149780 = ORIENTED_EDGE('',*,*,#149781,.T.); +#149781 = EDGE_CURVE('',#149782,#149784,#149786,.T.); +#149782 = VERTEX_POINT('',#149783); +#149783 = CARTESIAN_POINT('',(-6.575,1.942364624785,-1.303428834356)); +#149784 = VERTEX_POINT('',#149785); +#149785 = CARTESIAN_POINT('',(-6.575,2.00319046289,-1.472493471548)); +#149786 = LINE('',#149787,#149788); +#149787 = CARTESIAN_POINT('',(-6.575,1.942364624785,-1.303428834356)); +#149788 = VECTOR('',#149789,1.); +#149789 = DIRECTION('',(0.,0.338535034314,-0.940953787676)); +#149790 = ORIENTED_EDGE('',*,*,#149791,.T.); +#149791 = EDGE_CURVE('',#149784,#149792,#149794,.T.); +#149792 = VERTEX_POINT('',#149793); +#149793 = CARTESIAN_POINT('',(-6.575,1.866670248477,-1.472493471548)); +#149794 = LINE('',#149795,#149796); +#149795 = CARTESIAN_POINT('',(-6.575,2.00319046289,-1.472493471548)); +#149796 = VECTOR('',#149797,1.); +#149797 = DIRECTION('',(0.,-1.,1.111837575129E-14)); +#149798 = ORIENTED_EDGE('',*,*,#149799,.T.); +#149799 = EDGE_CURVE('',#149792,#149800,#149802,.T.); +#149800 = VERTEX_POINT('',#149801); +#149801 = CARTESIAN_POINT('',(-6.575,1.928119941331,-1.303428834356)); +#149802 = LINE('',#149803,#149804); +#149803 = CARTESIAN_POINT('',(-6.575,1.866670248477,-1.472493471548)); +#149804 = VECTOR('',#149805,1.); +#149805 = DIRECTION('',(0.,0.341603830682,0.939844041777)); +#149806 = ORIENTED_EDGE('',*,*,#149807,.T.); +#149807 = EDGE_CURVE('',#149800,#149808,#149810,.T.); +#149808 = VERTEX_POINT('',#149809); +#149809 = CARTESIAN_POINT('',(-6.575,1.934462464622,-1.274939467448)); +#149810 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149811,#149812,#149813, + #149814),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#149811 = CARTESIAN_POINT('',(-6.575,1.928119941331,-1.303428834356)); +#149812 = CARTESIAN_POINT('',(-6.575,1.930095481373,-1.297814141609)); +#149813 = CARTESIAN_POINT('',(-6.575,1.932174997206,-1.288456320362)); +#149814 = CARTESIAN_POINT('',(-6.575,1.934462464622,-1.274939467448)); +#149815 = ORIENTED_EDGE('',*,*,#149816,.T.); +#149816 = EDGE_CURVE('',#149808,#149817,#149819,.T.); +#149817 = VERTEX_POINT('',#149818); +#149818 = CARTESIAN_POINT('',(-6.575,1.93571017412,-1.274939467448)); +#149819 = LINE('',#149820,#149821); +#149820 = CARTESIAN_POINT('',(-6.575,1.934462464622,-1.274939467448)); +#149821 = VECTOR('',#149822,1.); +#149822 = DIRECTION('',(0.,1.,-1.737908021195E-13)); +#149823 = ORIENTED_EDGE('',*,*,#149824,.T.); +#149824 = EDGE_CURVE('',#149817,#149782,#149825,.T.); +#149825 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#149826,#149827,#149828, + #149829),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#149826 = CARTESIAN_POINT('',(-6.575,1.93571017412,-1.274939467448)); +#149827 = CARTESIAN_POINT('',(-6.575,1.937685714161,-1.287208610861)); +#149828 = CARTESIAN_POINT('',(-6.575,1.939869205786,-1.296774383691)); +#149829 = CARTESIAN_POINT('',(-6.575,1.942364624785,-1.303428834356)); +#149830 = PLANE('',#149831); +#149831 = AXIS2_PLACEMENT_3D('',#149832,#149833,#149834); +#149832 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#149833 = DIRECTION('',(1.,0.,0.)); +#149834 = DIRECTION('',(0.,0.,-1.)); +#149835 = ADVANCED_FACE('',(#149836),#149852,.F.); +#149836 = FACE_BOUND('',#149837,.T.); +#149837 = EDGE_LOOP('',(#149838,#149839,#149845,#149846)); +#149838 = ORIENTED_EDGE('',*,*,#149715,.T.); +#149839 = ORIENTED_EDGE('',*,*,#149840,.F.); +#149840 = EDGE_CURVE('',#149594,#149718,#149841,.T.); +#149841 = LINE('',#149842,#149843); +#149842 = CARTESIAN_POINT('',(-6.576,1.905869121922,-1.222951571634)); +#149843 = VECTOR('',#149844,1.); +#149844 = DIRECTION('',(1.,-0.,-0.)); +#149845 = ORIENTED_EDGE('',*,*,#149591,.F.); +#149846 = ORIENTED_EDGE('',*,*,#149847,.T.); +#149847 = EDGE_CURVE('',#149592,#149716,#149848,.T.); +#149848 = LINE('',#149849,#149850); +#149849 = CARTESIAN_POINT('',(-6.576,1.75094519239,-1.629704868496)); +#149850 = VECTOR('',#149851,1.); +#149851 = DIRECTION('',(1.,-0.,-0.)); +#149852 = PLANE('',#149853); +#149853 = AXIS2_PLACEMENT_3D('',#149854,#149855,#149856); +#149854 = CARTESIAN_POINT('',(-6.576,1.905869121922,-1.222951571634)); +#149855 = DIRECTION('',(0.,0.934510438742,-0.35593572437)); +#149856 = DIRECTION('',(0.,0.35593572437,0.934510438742)); +#149857 = ADVANCED_FACE('',(#149858),#149869,.F.); +#149858 = FACE_BOUND('',#149859,.T.); +#149859 = EDGE_LOOP('',(#149860,#149861,#149867,#149868)); +#149860 = ORIENTED_EDGE('',*,*,#149773,.T.); +#149861 = ORIENTED_EDGE('',*,*,#149862,.F.); +#149862 = EDGE_CURVE('',#149602,#149766,#149863,.T.); +#149863 = LINE('',#149864,#149865); +#149864 = CARTESIAN_POINT('',(-6.576,1.962016049403,-1.222951571634)); +#149865 = VECTOR('',#149866,1.); +#149866 = DIRECTION('',(1.,-0.,-0.)); +#149867 = ORIENTED_EDGE('',*,*,#149601,.F.); +#149868 = ORIENTED_EDGE('',*,*,#149840,.T.); +#149869 = PLANE('',#149870); +#149870 = AXIS2_PLACEMENT_3D('',#149871,#149872,#149873); +#149871 = CARTESIAN_POINT('',(-6.576,1.962016049403,-1.222951571634)); +#149872 = DIRECTION('',(0.,-1.158605346148E-14,-1.)); +#149873 = DIRECTION('',(0.,1.,-1.158605346148E-14)); +#149874 = ADVANCED_FACE('',(#149875),#149886,.F.); +#149875 = FACE_BOUND('',#149876,.T.); +#149876 = EDGE_LOOP('',(#149877,#149878,#149884,#149885)); +#149877 = ORIENTED_EDGE('',*,*,#149765,.T.); +#149878 = ORIENTED_EDGE('',*,*,#149879,.F.); +#149879 = EDGE_CURVE('',#149610,#149758,#149880,.T.); +#149880 = LINE('',#149881,#149882); +#149881 = CARTESIAN_POINT('',(-6.576,2.116939978932,-1.629704868496)); +#149882 = VECTOR('',#149883,1.); +#149883 = DIRECTION('',(1.,-0.,-0.)); +#149884 = ORIENTED_EDGE('',*,*,#149609,.F.); +#149885 = ORIENTED_EDGE('',*,*,#149862,.T.); +#149886 = PLANE('',#149887); +#149887 = AXIS2_PLACEMENT_3D('',#149888,#149889,#149890); +#149888 = CARTESIAN_POINT('',(-6.576,2.116939978932,-1.629704868496)); +#149889 = DIRECTION('',(0.,-0.934510438744,-0.355935724364)); +#149890 = DIRECTION('',(0.,0.355935724364,-0.934510438744)); +#149891 = ADVANCED_FACE('',(#149892),#149903,.F.); +#149892 = FACE_BOUND('',#149893,.T.); +#149893 = EDGE_LOOP('',(#149894,#149895,#149901,#149902)); +#149894 = ORIENTED_EDGE('',*,*,#149757,.T.); +#149895 = ORIENTED_EDGE('',*,*,#149896,.F.); +#149896 = EDGE_CURVE('',#149618,#149750,#149897,.T.); +#149897 = LINE('',#149898,#149899); +#149898 = CARTESIAN_POINT('',(-6.576,2.058921487204,-1.629704868496)); +#149899 = VECTOR('',#149900,1.); +#149900 = DIRECTION('',(1.,-0.,-0.)); +#149901 = ORIENTED_EDGE('',*,*,#149617,.F.); +#149902 = ORIENTED_EDGE('',*,*,#149879,.T.); +#149903 = PLANE('',#149904); +#149904 = AXIS2_PLACEMENT_3D('',#149905,#149906,#149907); +#149905 = CARTESIAN_POINT('',(-6.576,2.058921487204,-1.629704868496)); +#149906 = DIRECTION('',(0.,1.121230980184E-14,1.)); +#149907 = DIRECTION('',(0.,-1.,1.121230980184E-14)); +#149908 = ADVANCED_FACE('',(#149909),#149920,.F.); +#149909 = FACE_BOUND('',#149910,.T.); +#149910 = EDGE_LOOP('',(#149911,#149912,#149918,#149919)); +#149911 = ORIENTED_EDGE('',*,*,#149749,.T.); +#149912 = ORIENTED_EDGE('',*,*,#149913,.F.); +#149913 = EDGE_CURVE('',#149626,#149742,#149914,.T.); +#149914 = LINE('',#149915,#149916); +#149915 = CARTESIAN_POINT('',(-6.576,2.019826589551,-1.51845077145)); +#149916 = VECTOR('',#149917,1.); +#149917 = DIRECTION('',(1.,-0.,-0.)); +#149918 = ORIENTED_EDGE('',*,*,#149625,.F.); +#149919 = ORIENTED_EDGE('',*,*,#149896,.T.); +#149920 = PLANE('',#149921); +#149921 = AXIS2_PLACEMENT_3D('',#149922,#149923,#149924); +#149922 = CARTESIAN_POINT('',(-6.576,2.019826589551,-1.51845077145)); +#149923 = DIRECTION('',(0.,0.943445233082,0.33152841835)); +#149924 = DIRECTION('',(0.,-0.33152841835,0.943445233082)); +#149925 = ADVANCED_FACE('',(#149926),#149937,.F.); +#149926 = FACE_BOUND('',#149927,.T.); +#149927 = EDGE_LOOP('',(#149928,#149929,#149935,#149936)); +#149928 = ORIENTED_EDGE('',*,*,#149741,.T.); +#149929 = ORIENTED_EDGE('',*,*,#149930,.F.); +#149930 = EDGE_CURVE('',#149634,#149734,#149931,.T.); +#149931 = LINE('',#149932,#149933); +#149932 = CARTESIAN_POINT('',(-6.576,1.850450024982,-1.51845077145)); +#149933 = VECTOR('',#149934,1.); +#149934 = DIRECTION('',(1.,-0.,-0.)); +#149935 = ORIENTED_EDGE('',*,*,#149633,.F.); +#149936 = ORIENTED_EDGE('',*,*,#149913,.T.); +#149937 = PLANE('',#149938); +#149938 = AXIS2_PLACEMENT_3D('',#149939,#149940,#149941); +#149939 = CARTESIAN_POINT('',(-6.576,1.850450024982,-1.51845077145)); +#149940 = DIRECTION('',(0.,1.152204211627E-14,1.)); +#149941 = DIRECTION('',(0.,-1.,1.152204211627E-14)); +#149942 = ADVANCED_FACE('',(#149943),#149954,.F.); +#149943 = FACE_BOUND('',#149944,.T.); +#149944 = EDGE_LOOP('',(#149945,#149946,#149952,#149953)); +#149945 = ORIENTED_EDGE('',*,*,#149733,.T.); +#149946 = ORIENTED_EDGE('',*,*,#149947,.F.); +#149947 = EDGE_CURVE('',#149642,#149726,#149948,.T.); +#149948 = LINE('',#149949,#149950); +#149949 = CARTESIAN_POINT('',(-6.576,1.808963684121,-1.629704868496)); +#149950 = VECTOR('',#149951,1.); +#149951 = DIRECTION('',(1.,-0.,-0.)); +#149952 = ORIENTED_EDGE('',*,*,#149641,.F.); +#149953 = ORIENTED_EDGE('',*,*,#149930,.T.); +#149954 = PLANE('',#149955); +#149955 = AXIS2_PLACEMENT_3D('',#149956,#149957,#149958); +#149956 = CARTESIAN_POINT('',(-6.576,1.808963684121,-1.629704868496)); +#149957 = DIRECTION('',(0.,-0.936975345954,0.349395479469)); +#149958 = DIRECTION('',(0.,-0.349395479469,-0.936975345954)); +#149959 = ADVANCED_FACE('',(#149960),#149966,.F.); +#149960 = FACE_BOUND('',#149961,.T.); +#149961 = EDGE_LOOP('',(#149962,#149963,#149964,#149965)); +#149962 = ORIENTED_EDGE('',*,*,#149725,.T.); +#149963 = ORIENTED_EDGE('',*,*,#149847,.F.); +#149964 = ORIENTED_EDGE('',*,*,#149649,.F.); +#149965 = ORIENTED_EDGE('',*,*,#149947,.T.); +#149966 = PLANE('',#149967); +#149967 = AXIS2_PLACEMENT_3D('',#149968,#149969,#149970); +#149968 = CARTESIAN_POINT('',(-6.576,1.75094519239,-1.629704868496)); +#149969 = DIRECTION('',(0.,7.474873200869E-15,1.)); +#149970 = DIRECTION('',(0.,-1.,7.474873200869E-15)); +#149971 = ADVANCED_FACE('',(#149972),#149988,.T.); +#149972 = FACE_BOUND('',#149973,.T.); +#149973 = EDGE_LOOP('',(#149974,#149975,#149981,#149982)); +#149974 = ORIENTED_EDGE('',*,*,#149791,.F.); +#149975 = ORIENTED_EDGE('',*,*,#149976,.F.); +#149976 = EDGE_CURVE('',#149658,#149784,#149977,.T.); +#149977 = LINE('',#149978,#149979); +#149978 = CARTESIAN_POINT('',(-6.576,2.00319046289,-1.472493471548)); +#149979 = VECTOR('',#149980,1.); +#149980 = DIRECTION('',(1.,-0.,-0.)); +#149981 = ORIENTED_EDGE('',*,*,#149657,.T.); +#149982 = ORIENTED_EDGE('',*,*,#149983,.T.); +#149983 = EDGE_CURVE('',#149660,#149792,#149984,.T.); +#149984 = LINE('',#149985,#149986); +#149985 = CARTESIAN_POINT('',(-6.576,1.866670248477,-1.472493471548)); +#149986 = VECTOR('',#149987,1.); +#149987 = DIRECTION('',(1.,-0.,-0.)); +#149988 = PLANE('',#149989); +#149989 = AXIS2_PLACEMENT_3D('',#149990,#149991,#149992); +#149990 = CARTESIAN_POINT('',(-6.576,2.00319046289,-1.472493471548)); +#149991 = DIRECTION('',(0.,1.111837575129E-14,1.)); +#149992 = DIRECTION('',(0.,-1.,1.111837575129E-14)); +#149993 = ADVANCED_FACE('',(#149994),#150005,.T.); +#149994 = FACE_BOUND('',#149995,.T.); +#149995 = EDGE_LOOP('',(#149996,#149997,#149998,#149999)); +#149996 = ORIENTED_EDGE('',*,*,#149799,.F.); +#149997 = ORIENTED_EDGE('',*,*,#149983,.F.); +#149998 = ORIENTED_EDGE('',*,*,#149701,.T.); +#149999 = ORIENTED_EDGE('',*,*,#150000,.T.); +#150000 = EDGE_CURVE('',#149693,#149800,#150001,.T.); +#150001 = LINE('',#150002,#150003); +#150002 = CARTESIAN_POINT('',(-6.576,1.928119941331,-1.303428834356)); +#150003 = VECTOR('',#150004,1.); +#150004 = DIRECTION('',(1.,-0.,-0.)); +#150005 = PLANE('',#150006); +#150006 = AXIS2_PLACEMENT_3D('',#150007,#150008,#150009); +#150007 = CARTESIAN_POINT('',(-6.576,1.866670248477,-1.472493471548)); +#150008 = DIRECTION('',(0.,0.939844041777,-0.341603830682)); +#150009 = DIRECTION('',(0.,0.341603830682,0.939844041777)); +#150010 = ADVANCED_FACE('',(#150011),#150022,.T.); +#150011 = FACE_BOUND('',#150012,.T.); +#150012 = EDGE_LOOP('',(#150013,#150014,#150015,#150016)); +#150013 = ORIENTED_EDGE('',*,*,#149807,.F.); +#150014 = ORIENTED_EDGE('',*,*,#150000,.F.); +#150015 = ORIENTED_EDGE('',*,*,#149692,.T.); +#150016 = ORIENTED_EDGE('',*,*,#150017,.T.); +#150017 = EDGE_CURVE('',#149685,#149808,#150018,.T.); +#150018 = LINE('',#150019,#150020); +#150019 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#150020 = VECTOR('',#150021,1.); +#150021 = DIRECTION('',(1.,-0.,-0.)); +#150022 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#150023,#150024) + ,(#150025,#150026) + ,(#150027,#150028) + ,(#150029,#150030 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150023 = CARTESIAN_POINT('',(-6.576,1.928119941331,-1.303428834356)); +#150024 = CARTESIAN_POINT('',(-6.575,1.928119941331,-1.303428834356)); +#150025 = CARTESIAN_POINT('',(-6.576,1.930095481373,-1.297814141609)); +#150026 = CARTESIAN_POINT('',(-6.575,1.930095481373,-1.297814141609)); +#150027 = CARTESIAN_POINT('',(-6.576,1.932174997206,-1.288456320362)); +#150028 = CARTESIAN_POINT('',(-6.575,1.932174997206,-1.288456320362)); +#150029 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#150030 = CARTESIAN_POINT('',(-6.575,1.934462464622,-1.274939467448)); +#150031 = ADVANCED_FACE('',(#150032),#150043,.T.); +#150032 = FACE_BOUND('',#150033,.T.); +#150033 = EDGE_LOOP('',(#150034,#150035,#150036,#150037)); +#150034 = ORIENTED_EDGE('',*,*,#149816,.F.); +#150035 = ORIENTED_EDGE('',*,*,#150017,.F.); +#150036 = ORIENTED_EDGE('',*,*,#149684,.T.); +#150037 = ORIENTED_EDGE('',*,*,#150038,.T.); +#150038 = EDGE_CURVE('',#149676,#149817,#150039,.T.); +#150039 = LINE('',#150040,#150041); +#150040 = CARTESIAN_POINT('',(-6.576,1.93571017412,-1.274939467448)); +#150041 = VECTOR('',#150042,1.); +#150042 = DIRECTION('',(1.,-0.,-0.)); +#150043 = PLANE('',#150044); +#150044 = AXIS2_PLACEMENT_3D('',#150045,#150046,#150047); +#150045 = CARTESIAN_POINT('',(-6.576,1.934462464622,-1.274939467448)); +#150046 = DIRECTION('',(0.,-1.737908021195E-13,-1.)); +#150047 = DIRECTION('',(0.,1.,-1.737908021195E-13)); +#150048 = ADVANCED_FACE('',(#150049),#150060,.T.); +#150049 = FACE_BOUND('',#150050,.T.); +#150050 = EDGE_LOOP('',(#150051,#150052,#150053,#150054)); +#150051 = ORIENTED_EDGE('',*,*,#149824,.F.); +#150052 = ORIENTED_EDGE('',*,*,#150038,.F.); +#150053 = ORIENTED_EDGE('',*,*,#149675,.T.); +#150054 = ORIENTED_EDGE('',*,*,#150055,.T.); +#150055 = EDGE_CURVE('',#149668,#149782,#150056,.T.); +#150056 = LINE('',#150057,#150058); +#150057 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#150058 = VECTOR('',#150059,1.); +#150059 = DIRECTION('',(1.,-0.,-0.)); +#150060 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#150061,#150062) + ,(#150063,#150064) + ,(#150065,#150066) + ,(#150067,#150068 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150061 = CARTESIAN_POINT('',(-6.576,1.93571017412,-1.274939467448)); +#150062 = CARTESIAN_POINT('',(-6.575,1.93571017412,-1.274939467448)); +#150063 = CARTESIAN_POINT('',(-6.576,1.937685714161,-1.287208610861)); +#150064 = CARTESIAN_POINT('',(-6.575,1.937685714161,-1.287208610861)); +#150065 = CARTESIAN_POINT('',(-6.576,1.939869205786,-1.296774383691)); +#150066 = CARTESIAN_POINT('',(-6.575,1.939869205786,-1.296774383691)); +#150067 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#150068 = CARTESIAN_POINT('',(-6.575,1.942364624785,-1.303428834356)); +#150069 = ADVANCED_FACE('',(#150070),#150076,.T.); +#150070 = FACE_BOUND('',#150071,.T.); +#150071 = EDGE_LOOP('',(#150072,#150073,#150074,#150075)); +#150072 = ORIENTED_EDGE('',*,*,#149781,.F.); +#150073 = ORIENTED_EDGE('',*,*,#150055,.F.); +#150074 = ORIENTED_EDGE('',*,*,#149667,.T.); +#150075 = ORIENTED_EDGE('',*,*,#149976,.T.); +#150076 = PLANE('',#150077); +#150077 = AXIS2_PLACEMENT_3D('',#150078,#150079,#150080); +#150078 = CARTESIAN_POINT('',(-6.576,1.942364624785,-1.303428834356)); +#150079 = DIRECTION('',(0.,-0.940953787676,-0.338535034314)); +#150080 = DIRECTION('',(0.,0.338535034314,-0.940953787676)); +#150081 = MANIFOLD_SOLID_BREP('',#150082); +#150082 = CLOSED_SHELL('',(#150083,#150123,#150154,#150185,#150216, + #150247,#150278,#150309,#150340,#150371,#150402,#150433,#150455, + #150475)); +#150083 = ADVANCED_FACE('',(#150084),#150118,.F.); +#150084 = FACE_BOUND('',#150085,.T.); +#150085 = EDGE_LOOP('',(#150086,#150096,#150104,#150112)); +#150086 = ORIENTED_EDGE('',*,*,#150087,.T.); +#150087 = EDGE_CURVE('',#150088,#150090,#150092,.T.); +#150088 = VERTEX_POINT('',#150089); +#150089 = CARTESIAN_POINT('',(-6.575,3.164600055416,-2.274978631362)); +#150090 = VERTEX_POINT('',#150091); +#150091 = CARTESIAN_POINT('',(-6.575,3.164600055416,-2.228605428294)); +#150092 = LINE('',#150093,#150094); +#150093 = CARTESIAN_POINT('',(-6.575,3.164600055416,-2.228605428294)); +#150094 = VECTOR('',#150095,1.); +#150095 = DIRECTION('',(-0.,9.351971403878E-15,1.)); +#150096 = ORIENTED_EDGE('',*,*,#150097,.F.); +#150097 = EDGE_CURVE('',#150098,#150090,#150100,.T.); +#150098 = VERTEX_POINT('',#150099); +#150099 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.228605428294)); +#150100 = LINE('',#150101,#150102); +#150101 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.228605428294)); +#150102 = VECTOR('',#150103,1.); +#150103 = DIRECTION('',(1.,-0.,-0.)); +#150104 = ORIENTED_EDGE('',*,*,#150105,.F.); +#150105 = EDGE_CURVE('',#150106,#150098,#150108,.T.); +#150106 = VERTEX_POINT('',#150107); +#150107 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.274978631362)); +#150108 = LINE('',#150109,#150110); +#150109 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.228605428294)); +#150110 = VECTOR('',#150111,1.); +#150111 = DIRECTION('',(-0.,9.351971403878E-15,1.)); +#150112 = ORIENTED_EDGE('',*,*,#150113,.T.); +#150113 = EDGE_CURVE('',#150106,#150088,#150114,.T.); +#150114 = LINE('',#150115,#150116); +#150115 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.274978631362)); +#150116 = VECTOR('',#150117,1.); +#150117 = DIRECTION('',(1.,-0.,-0.)); +#150118 = PLANE('',#150119); +#150119 = AXIS2_PLACEMENT_3D('',#150120,#150121,#150122); +#150120 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.228605428294)); +#150121 = DIRECTION('',(0.,1.,-9.351971403878E-15)); +#150122 = DIRECTION('',(0.,9.351971403878E-15,1.)); +#150123 = ADVANCED_FACE('',(#150124),#150149,.F.); +#150124 = FACE_BOUND('',#150125,.T.); +#150125 = EDGE_LOOP('',(#150126,#150134,#150142,#150148)); +#150126 = ORIENTED_EDGE('',*,*,#150127,.T.); +#150127 = EDGE_CURVE('',#150090,#150128,#150130,.T.); +#150128 = VERTEX_POINT('',#150129); +#150129 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.228605428294)); +#150130 = LINE('',#150131,#150132); +#150131 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.228605428294)); +#150132 = VECTOR('',#150133,1.); +#150133 = DIRECTION('',(-0.,1.,-1.04339693461E-14)); +#150134 = ORIENTED_EDGE('',*,*,#150135,.F.); +#150135 = EDGE_CURVE('',#150136,#150128,#150138,.T.); +#150136 = VERTEX_POINT('',#150137); +#150137 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.228605428294)); +#150138 = LINE('',#150139,#150140); +#150139 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.228605428294)); +#150140 = VECTOR('',#150141,1.); +#150141 = DIRECTION('',(1.,-0.,-0.)); +#150142 = ORIENTED_EDGE('',*,*,#150143,.F.); +#150143 = EDGE_CURVE('',#150098,#150136,#150144,.T.); +#150144 = LINE('',#150145,#150146); +#150145 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.228605428294)); +#150146 = VECTOR('',#150147,1.); +#150147 = DIRECTION('',(-0.,1.,-1.04339693461E-14)); +#150148 = ORIENTED_EDGE('',*,*,#150097,.T.); +#150149 = PLANE('',#150150); +#150150 = AXIS2_PLACEMENT_3D('',#150151,#150152,#150153); +#150151 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.228605428294)); +#150152 = DIRECTION('',(0.,-1.04339693461E-14,-1.)); +#150153 = DIRECTION('',(0.,1.,-1.04339693461E-14)); +#150154 = ADVANCED_FACE('',(#150155),#150180,.F.); +#150155 = FACE_BOUND('',#150156,.T.); +#150156 = EDGE_LOOP('',(#150157,#150165,#150173,#150179)); +#150157 = ORIENTED_EDGE('',*,*,#150158,.T.); +#150158 = EDGE_CURVE('',#150128,#150159,#150161,.T.); +#150159 = VERTEX_POINT('',#150160); +#150160 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.091773286508)); +#150161 = LINE('',#150162,#150163); +#150162 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.091773286508)); +#150163 = VECTOR('',#150164,1.); +#150164 = DIRECTION('',(-0.,9.508311351374E-15,1.)); +#150165 = ORIENTED_EDGE('',*,*,#150166,.F.); +#150166 = EDGE_CURVE('',#150167,#150159,#150169,.T.); +#150167 = VERTEX_POINT('',#150168); +#150168 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.091773286508)); +#150169 = LINE('',#150170,#150171); +#150170 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.091773286508)); +#150171 = VECTOR('',#150172,1.); +#150172 = DIRECTION('',(1.,-0.,-0.)); +#150173 = ORIENTED_EDGE('',*,*,#150174,.F.); +#150174 = EDGE_CURVE('',#150136,#150167,#150175,.T.); +#150175 = LINE('',#150176,#150177); +#150176 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.091773286508)); +#150177 = VECTOR('',#150178,1.); +#150178 = DIRECTION('',(-0.,9.508311351374E-15,1.)); +#150179 = ORIENTED_EDGE('',*,*,#150135,.T.); +#150180 = PLANE('',#150181); +#150181 = AXIS2_PLACEMENT_3D('',#150182,#150183,#150184); +#150182 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.091773286508)); +#150183 = DIRECTION('',(0.,1.,-9.508311351374E-15)); +#150184 = DIRECTION('',(0.,9.508311351374E-15,1.)); +#150185 = ADVANCED_FACE('',(#150186),#150211,.F.); +#150186 = FACE_BOUND('',#150187,.T.); +#150187 = EDGE_LOOP('',(#150188,#150196,#150204,#150210)); +#150188 = ORIENTED_EDGE('',*,*,#150189,.T.); +#150189 = EDGE_CURVE('',#150159,#150190,#150192,.T.); +#150190 = VERTEX_POINT('',#150191); +#150191 = CARTESIAN_POINT('',(-6.575,3.185395213742,-2.091773286508)); +#150192 = LINE('',#150193,#150194); +#150193 = CARTESIAN_POINT('',(-6.575,3.185395213742,-2.091773286508)); +#150194 = VECTOR('',#150195,1.); +#150195 = DIRECTION('',(-0.,-1.,8.944201385487E-15)); +#150196 = ORIENTED_EDGE('',*,*,#150197,.F.); +#150197 = EDGE_CURVE('',#150198,#150190,#150200,.T.); +#150198 = VERTEX_POINT('',#150199); +#150199 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.091773286508)); +#150200 = LINE('',#150201,#150202); +#150201 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.091773286508)); +#150202 = VECTOR('',#150203,1.); +#150203 = DIRECTION('',(1.,-0.,-0.)); +#150204 = ORIENTED_EDGE('',*,*,#150205,.F.); +#150205 = EDGE_CURVE('',#150167,#150198,#150206,.T.); +#150206 = LINE('',#150207,#150208); +#150207 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.091773286508)); +#150208 = VECTOR('',#150209,1.); +#150209 = DIRECTION('',(-0.,-1.,8.944201385487E-15)); +#150210 = ORIENTED_EDGE('',*,*,#150166,.T.); +#150211 = PLANE('',#150212); +#150212 = AXIS2_PLACEMENT_3D('',#150213,#150214,#150215); +#150213 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.091773286508)); +#150214 = DIRECTION('',(0.,8.944201385487E-15,1.)); +#150215 = DIRECTION('',(0.,-1.,8.944201385487E-15)); +#150216 = ADVANCED_FACE('',(#150217),#150242,.F.); +#150217 = FACE_BOUND('',#150218,.T.); +#150218 = EDGE_LOOP('',(#150219,#150227,#150235,#150241)); +#150219 = ORIENTED_EDGE('',*,*,#150220,.T.); +#150220 = EDGE_CURVE('',#150190,#150221,#150223,.T.); +#150221 = VERTEX_POINT('',#150222); +#150222 = CARTESIAN_POINT('',(-6.575,3.185395213742,-2.045192131857)); +#150223 = LINE('',#150224,#150225); +#150224 = CARTESIAN_POINT('',(-6.575,3.185395213742,-2.045192131857)); +#150225 = VECTOR('',#150226,1.); +#150226 = DIRECTION('',(-0.,1.862044306318E-14,1.)); +#150227 = ORIENTED_EDGE('',*,*,#150228,.F.); +#150228 = EDGE_CURVE('',#150229,#150221,#150231,.T.); +#150229 = VERTEX_POINT('',#150230); +#150230 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.045192131857)); +#150231 = LINE('',#150232,#150233); +#150232 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.045192131857)); +#150233 = VECTOR('',#150234,1.); +#150234 = DIRECTION('',(1.,-0.,-0.)); +#150235 = ORIENTED_EDGE('',*,*,#150236,.F.); +#150236 = EDGE_CURVE('',#150198,#150229,#150237,.T.); +#150237 = LINE('',#150238,#150239); +#150238 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.045192131857)); +#150239 = VECTOR('',#150240,1.); +#150240 = DIRECTION('',(-0.,1.862044306318E-14,1.)); +#150241 = ORIENTED_EDGE('',*,*,#150197,.T.); +#150242 = PLANE('',#150243); +#150243 = AXIS2_PLACEMENT_3D('',#150244,#150245,#150246); +#150244 = CARTESIAN_POINT('',(-6.576,3.185395213742,-2.045192131857)); +#150245 = DIRECTION('',(0.,1.,-1.862044306318E-14)); +#150246 = DIRECTION('',(0.,1.862044306318E-14,1.)); +#150247 = ADVANCED_FACE('',(#150248),#150273,.F.); +#150248 = FACE_BOUND('',#150249,.T.); +#150249 = EDGE_LOOP('',(#150250,#150258,#150266,#150272)); +#150250 = ORIENTED_EDGE('',*,*,#150251,.T.); +#150251 = EDGE_CURVE('',#150221,#150252,#150254,.T.); +#150252 = VERTEX_POINT('',#150253); +#150253 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.045192131857)); +#150254 = LINE('',#150255,#150256); +#150255 = CARTESIAN_POINT('',(-6.575,3.330857346235,-2.045192131857)); +#150256 = VECTOR('',#150257,1.); +#150257 = DIRECTION('',(-0.,1.,-1.192560184732E-14)); +#150258 = ORIENTED_EDGE('',*,*,#150259,.F.); +#150259 = EDGE_CURVE('',#150260,#150252,#150262,.T.); +#150260 = VERTEX_POINT('',#150261); +#150261 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.045192131857)); +#150262 = LINE('',#150263,#150264); +#150263 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.045192131857)); +#150264 = VECTOR('',#150265,1.); +#150265 = DIRECTION('',(1.,-0.,-0.)); +#150266 = ORIENTED_EDGE('',*,*,#150267,.F.); +#150267 = EDGE_CURVE('',#150229,#150260,#150268,.T.); +#150268 = LINE('',#150269,#150270); +#150269 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.045192131857)); +#150270 = VECTOR('',#150271,1.); +#150271 = DIRECTION('',(-0.,1.,-1.192560184732E-14)); +#150272 = ORIENTED_EDGE('',*,*,#150228,.T.); +#150273 = PLANE('',#150274); +#150274 = AXIS2_PLACEMENT_3D('',#150275,#150276,#150277); +#150275 = CARTESIAN_POINT('',(-6.576,3.330857346235,-2.045192131857)); +#150276 = DIRECTION('',(0.,-1.192560184732E-14,-1.)); +#150277 = DIRECTION('',(0.,1.,-1.192560184732E-14)); +#150278 = ADVANCED_FACE('',(#150279),#150304,.F.); +#150279 = FACE_BOUND('',#150280,.T.); +#150280 = EDGE_LOOP('',(#150281,#150289,#150297,#150303)); +#150281 = ORIENTED_EDGE('',*,*,#150282,.T.); +#150282 = EDGE_CURVE('',#150252,#150283,#150285,.T.); +#150283 = VERTEX_POINT('',#150284); +#150284 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.915014440733)); +#150285 = LINE('',#150286,#150287); +#150286 = CARTESIAN_POINT('',(-6.575,3.330857346235,-1.915014440733)); +#150287 = VECTOR('',#150288,1.); +#150288 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#150289 = ORIENTED_EDGE('',*,*,#150290,.F.); +#150290 = EDGE_CURVE('',#150291,#150283,#150293,.T.); +#150291 = VERTEX_POINT('',#150292); +#150292 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.915014440733)); +#150293 = LINE('',#150294,#150295); +#150294 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.915014440733)); +#150295 = VECTOR('',#150296,1.); +#150296 = DIRECTION('',(1.,-0.,-0.)); +#150297 = ORIENTED_EDGE('',*,*,#150298,.F.); +#150298 = EDGE_CURVE('',#150260,#150291,#150299,.T.); +#150299 = LINE('',#150300,#150301); +#150300 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.915014440733)); +#150301 = VECTOR('',#150302,1.); +#150302 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#150303 = ORIENTED_EDGE('',*,*,#150259,.T.); +#150304 = PLANE('',#150305); +#150305 = AXIS2_PLACEMENT_3D('',#150306,#150307,#150308); +#150306 = CARTESIAN_POINT('',(-6.576,3.330857346235,-1.915014440733)); +#150307 = DIRECTION('',(0.,1.,-9.994359215826E-15)); +#150308 = DIRECTION('',(0.,9.994359215826E-15,1.)); +#150309 = ADVANCED_FACE('',(#150310),#150335,.F.); +#150310 = FACE_BOUND('',#150311,.T.); +#150311 = EDGE_LOOP('',(#150312,#150320,#150328,#150334)); +#150312 = ORIENTED_EDGE('',*,*,#150313,.T.); +#150313 = EDGE_CURVE('',#150283,#150314,#150316,.T.); +#150314 = VERTEX_POINT('',#150315); +#150315 = CARTESIAN_POINT('',(-6.575,3.173853900872,-1.915014440733)); +#150316 = LINE('',#150317,#150318); +#150317 = CARTESIAN_POINT('',(-6.575,3.173853900872,-1.915014440733)); +#150318 = VECTOR('',#150319,1.); +#150319 = DIRECTION('',(-0.,-1.,1.104895164535E-14)); +#150320 = ORIENTED_EDGE('',*,*,#150321,.F.); +#150321 = EDGE_CURVE('',#150322,#150314,#150324,.T.); +#150322 = VERTEX_POINT('',#150323); +#150323 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.915014440733)); +#150324 = LINE('',#150325,#150326); +#150325 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.915014440733)); +#150326 = VECTOR('',#150327,1.); +#150327 = DIRECTION('',(1.,-0.,-0.)); +#150328 = ORIENTED_EDGE('',*,*,#150329,.F.); +#150329 = EDGE_CURVE('',#150291,#150322,#150330,.T.); +#150330 = LINE('',#150331,#150332); +#150331 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.915014440733)); +#150332 = VECTOR('',#150333,1.); +#150333 = DIRECTION('',(-0.,-1.,1.104895164535E-14)); +#150334 = ORIENTED_EDGE('',*,*,#150290,.T.); +#150335 = PLANE('',#150336); +#150336 = AXIS2_PLACEMENT_3D('',#150337,#150338,#150339); +#150337 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.915014440733)); +#150338 = DIRECTION('',(0.,1.104895164535E-14,1.)); +#150339 = DIRECTION('',(0.,-1.,1.104895164535E-14)); +#150340 = ADVANCED_FACE('',(#150341),#150366,.F.); +#150341 = FACE_BOUND('',#150342,.T.); +#150342 = EDGE_LOOP('',(#150343,#150351,#150359,#150365)); +#150343 = ORIENTED_EDGE('',*,*,#150344,.T.); +#150344 = EDGE_CURVE('',#150314,#150345,#150347,.T.); +#150345 = VERTEX_POINT('',#150346); +#150346 = CARTESIAN_POINT('',(-6.575,3.173853900872,-1.868225334499)); +#150347 = LINE('',#150348,#150349); +#150348 = CARTESIAN_POINT('',(-6.575,3.173853900872,-1.868225334499)); +#150349 = VECTOR('',#150350,1.); +#150350 = DIRECTION('',(-0.,9.268842769273E-15,1.)); +#150351 = ORIENTED_EDGE('',*,*,#150352,.F.); +#150352 = EDGE_CURVE('',#150353,#150345,#150355,.T.); +#150353 = VERTEX_POINT('',#150354); +#150354 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.868225334499)); +#150355 = LINE('',#150356,#150357); +#150356 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.868225334499)); +#150357 = VECTOR('',#150358,1.); +#150358 = DIRECTION('',(1.,-0.,-0.)); +#150359 = ORIENTED_EDGE('',*,*,#150360,.F.); +#150360 = EDGE_CURVE('',#150322,#150353,#150361,.T.); +#150361 = LINE('',#150362,#150363); +#150362 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.868225334499)); +#150363 = VECTOR('',#150364,1.); +#150364 = DIRECTION('',(-0.,9.268842769273E-15,1.)); +#150365 = ORIENTED_EDGE('',*,*,#150321,.T.); +#150366 = PLANE('',#150367); +#150367 = AXIS2_PLACEMENT_3D('',#150368,#150369,#150370); +#150368 = CARTESIAN_POINT('',(-6.576,3.173853900872,-1.868225334499)); +#150369 = DIRECTION('',(0.,1.,-9.268842769273E-15)); +#150370 = DIRECTION('',(0.,9.268842769273E-15,1.)); +#150371 = ADVANCED_FACE('',(#150372),#150397,.F.); +#150372 = FACE_BOUND('',#150373,.T.); +#150373 = EDGE_LOOP('',(#150374,#150382,#150390,#150396)); +#150374 = ORIENTED_EDGE('',*,*,#150375,.T.); +#150375 = EDGE_CURVE('',#150345,#150376,#150378,.T.); +#150376 = VERTEX_POINT('',#150377); +#150377 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.868225334499)); +#150378 = LINE('',#150379,#150380); +#150379 = CARTESIAN_POINT('',(-6.575,3.383365121009,-1.868225334499)); +#150380 = VECTOR('',#150381,1.); +#150381 = DIRECTION('',(-0.,1.,-1.034982443206E-14)); +#150382 = ORIENTED_EDGE('',*,*,#150383,.F.); +#150383 = EDGE_CURVE('',#150384,#150376,#150386,.T.); +#150384 = VERTEX_POINT('',#150385); +#150385 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.868225334499)); +#150386 = LINE('',#150387,#150388); +#150387 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.868225334499)); +#150388 = VECTOR('',#150389,1.); +#150389 = DIRECTION('',(1.,-0.,-0.)); +#150390 = ORIENTED_EDGE('',*,*,#150391,.F.); +#150391 = EDGE_CURVE('',#150353,#150384,#150392,.T.); +#150392 = LINE('',#150393,#150394); +#150393 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.868225334499)); +#150394 = VECTOR('',#150395,1.); +#150395 = DIRECTION('',(-0.,1.,-1.034982443206E-14)); +#150396 = ORIENTED_EDGE('',*,*,#150352,.T.); +#150397 = PLANE('',#150398); +#150398 = AXIS2_PLACEMENT_3D('',#150399,#150400,#150401); +#150399 = CARTESIAN_POINT('',(-6.576,3.383365121009,-1.868225334499)); +#150400 = DIRECTION('',(0.,-1.034982443206E-14,-1.)); +#150401 = DIRECTION('',(0.,1.,-1.034982443206E-14)); +#150402 = ADVANCED_FACE('',(#150403),#150428,.F.); +#150403 = FACE_BOUND('',#150404,.T.); +#150404 = EDGE_LOOP('',(#150405,#150413,#150421,#150427)); +#150405 = ORIENTED_EDGE('',*,*,#150406,.T.); +#150406 = EDGE_CURVE('',#150376,#150407,#150409,.T.); +#150407 = VERTEX_POINT('',#150408); +#150408 = CARTESIAN_POINT('',(-6.575,3.383365121009,-2.274978631362)); +#150409 = LINE('',#150410,#150411); +#150410 = CARTESIAN_POINT('',(-6.575,3.383365121009,-2.274978631362)); +#150411 = VECTOR('',#150412,1.); +#150412 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#150413 = ORIENTED_EDGE('',*,*,#150414,.F.); +#150414 = EDGE_CURVE('',#150415,#150407,#150417,.T.); +#150415 = VERTEX_POINT('',#150416); +#150416 = CARTESIAN_POINT('',(-6.576,3.383365121009,-2.274978631362)); +#150417 = LINE('',#150418,#150419); +#150418 = CARTESIAN_POINT('',(-6.576,3.383365121009,-2.274978631362)); +#150419 = VECTOR('',#150420,1.); +#150420 = DIRECTION('',(1.,-0.,-0.)); +#150421 = ORIENTED_EDGE('',*,*,#150422,.F.); +#150422 = EDGE_CURVE('',#150384,#150415,#150423,.T.); +#150423 = LINE('',#150424,#150425); +#150424 = CARTESIAN_POINT('',(-6.576,3.383365121009,-2.274978631362)); +#150425 = VECTOR('',#150426,1.); +#150426 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#150427 = ORIENTED_EDGE('',*,*,#150383,.T.); +#150428 = PLANE('',#150429); +#150429 = AXIS2_PLACEMENT_3D('',#150430,#150431,#150432); +#150430 = CARTESIAN_POINT('',(-6.576,3.383365121009,-2.274978631362)); +#150431 = DIRECTION('',(0.,-1.,1.066201238783E-14)); +#150432 = DIRECTION('',(0.,-1.066201238783E-14,-1.)); +#150433 = ADVANCED_FACE('',(#150434),#150450,.F.); +#150434 = FACE_BOUND('',#150435,.T.); +#150435 = EDGE_LOOP('',(#150436,#150442,#150443,#150449)); +#150436 = ORIENTED_EDGE('',*,*,#150437,.T.); +#150437 = EDGE_CURVE('',#150407,#150088,#150438,.T.); +#150438 = LINE('',#150439,#150440); +#150439 = CARTESIAN_POINT('',(-6.575,3.164600055416,-2.274978631362)); +#150440 = VECTOR('',#150441,1.); +#150441 = DIRECTION('',(-0.,-1.,9.912022923267E-15)); +#150442 = ORIENTED_EDGE('',*,*,#150113,.F.); +#150443 = ORIENTED_EDGE('',*,*,#150444,.F.); +#150444 = EDGE_CURVE('',#150415,#150106,#150445,.T.); +#150445 = LINE('',#150446,#150447); +#150446 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.274978631362)); +#150447 = VECTOR('',#150448,1.); +#150448 = DIRECTION('',(-0.,-1.,9.912022923267E-15)); +#150449 = ORIENTED_EDGE('',*,*,#150414,.T.); +#150450 = PLANE('',#150451); +#150451 = AXIS2_PLACEMENT_3D('',#150452,#150453,#150454); +#150452 = CARTESIAN_POINT('',(-6.576,3.164600055416,-2.274978631362)); +#150453 = DIRECTION('',(0.,9.912022923267E-15,1.)); +#150454 = DIRECTION('',(0.,-1.,9.912022923267E-15)); +#150455 = ADVANCED_FACE('',(#150456),#150470,.F.); +#150456 = FACE_BOUND('',#150457,.T.); +#150457 = EDGE_LOOP('',(#150458,#150459,#150460,#150461,#150462,#150463, + #150464,#150465,#150466,#150467,#150468,#150469)); +#150458 = ORIENTED_EDGE('',*,*,#150105,.T.); +#150459 = ORIENTED_EDGE('',*,*,#150143,.T.); +#150460 = ORIENTED_EDGE('',*,*,#150174,.T.); +#150461 = ORIENTED_EDGE('',*,*,#150205,.T.); +#150462 = ORIENTED_EDGE('',*,*,#150236,.T.); +#150463 = ORIENTED_EDGE('',*,*,#150267,.T.); +#150464 = ORIENTED_EDGE('',*,*,#150298,.T.); +#150465 = ORIENTED_EDGE('',*,*,#150329,.T.); +#150466 = ORIENTED_EDGE('',*,*,#150360,.T.); +#150467 = ORIENTED_EDGE('',*,*,#150391,.T.); +#150468 = ORIENTED_EDGE('',*,*,#150422,.T.); +#150469 = ORIENTED_EDGE('',*,*,#150444,.T.); +#150470 = PLANE('',#150471); +#150471 = AXIS2_PLACEMENT_3D('',#150472,#150473,#150474); +#150472 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#150473 = DIRECTION('',(1.,0.,0.)); +#150474 = DIRECTION('',(0.,0.,-1.)); +#150475 = ADVANCED_FACE('',(#150476),#150490,.T.); +#150476 = FACE_BOUND('',#150477,.T.); +#150477 = EDGE_LOOP('',(#150478,#150479,#150480,#150481,#150482,#150483, + #150484,#150485,#150486,#150487,#150488,#150489)); +#150478 = ORIENTED_EDGE('',*,*,#150087,.F.); +#150479 = ORIENTED_EDGE('',*,*,#150437,.F.); +#150480 = ORIENTED_EDGE('',*,*,#150406,.F.); +#150481 = ORIENTED_EDGE('',*,*,#150375,.F.); +#150482 = ORIENTED_EDGE('',*,*,#150344,.F.); +#150483 = ORIENTED_EDGE('',*,*,#150313,.F.); +#150484 = ORIENTED_EDGE('',*,*,#150282,.F.); +#150485 = ORIENTED_EDGE('',*,*,#150251,.F.); +#150486 = ORIENTED_EDGE('',*,*,#150220,.F.); +#150487 = ORIENTED_EDGE('',*,*,#150189,.F.); +#150488 = ORIENTED_EDGE('',*,*,#150158,.F.); +#150489 = ORIENTED_EDGE('',*,*,#150127,.F.); +#150490 = PLANE('',#150491); +#150491 = AXIS2_PLACEMENT_3D('',#150492,#150493,#150494); +#150492 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#150493 = DIRECTION('',(1.,0.,0.)); +#150494 = DIRECTION('',(0.,0.,-1.)); +#150495 = MANIFOLD_SOLID_BREP('',#150496); +#150496 = CLOSED_SHELL('',(#150497,#150697,#150897,#150923,#150940, + #150961,#150982,#150999,#151020,#151041,#151062,#151083,#151100, + #151117,#151134,#151151,#151167,#151193,#151214,#151235,#151256, + #151277,#151298,#151315)); +#150497 = ADVANCED_FACE('',(#150498,#150620),#150692,.T.); +#150498 = FACE_BOUND('',#150499,.T.); +#150499 = EDGE_LOOP('',(#150500,#150511,#150519,#150528,#150537,#150545, + #150554,#150563,#150572,#150581,#150589,#150597,#150605,#150613)); +#150500 = ORIENTED_EDGE('',*,*,#150501,.T.); +#150501 = EDGE_CURVE('',#150502,#150504,#150506,.T.); +#150502 = VERTEX_POINT('',#150503); +#150503 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#150504 = VERTEX_POINT('',#150505); +#150505 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.004849524703)); +#150506 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150507,#150508,#150509, + #150510),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150507 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#150508 = CARTESIAN_POINT('',(-6.576,3.025272494629,-1.977815818879)); +#150509 = CARTESIAN_POINT('',(-6.576,3.058648723743,-1.98675773696)); +#150510 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.004849524703)); +#150511 = ORIENTED_EDGE('',*,*,#150512,.T.); +#150512 = EDGE_CURVE('',#150504,#150513,#150515,.T.); +#150513 = VERTEX_POINT('',#150514); +#150514 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150515 = LINE('',#150516,#150517); +#150516 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150517 = VECTOR('',#150518,1.); +#150518 = DIRECTION('',(-0.,-1.752512288219E-14,-1.)); +#150519 = ORIENTED_EDGE('',*,*,#150520,.T.); +#150520 = EDGE_CURVE('',#150513,#150521,#150523,.T.); +#150521 = VERTEX_POINT('',#150522); +#150522 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150523 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150524,#150525,#150526, + #150527),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#150524 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150525 = CARTESIAN_POINT('',(-6.576,3.058752699535,-2.031051424195)); +#150526 = CARTESIAN_POINT('',(-6.576,3.027040083087,-2.019198183948)); +#150527 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150528 = ORIENTED_EDGE('',*,*,#150529,.T.); +#150529 = EDGE_CURVE('',#150521,#150530,#150532,.T.); +#150530 = VERTEX_POINT('',#150531); +#150531 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.090317625424)); +#150532 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150533,#150534,#150535, + #150536),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#150533 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150534 = CARTESIAN_POINT('',(-6.576,2.953009319445,-2.019198183948)); +#150535 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.042904664441)); +#150536 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.090317625424)); +#150537 = ORIENTED_EDGE('',*,*,#150538,.T.); +#150538 = EDGE_CURVE('',#150530,#150539,#150541,.T.); +#150539 = VERTEX_POINT('',#150540); +#150540 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#150541 = LINE('',#150542,#150543); +#150542 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#150543 = VECTOR('',#150544,1.); +#150544 = DIRECTION('',(-0.,0.990328603988,-0.138741688482)); +#150545 = ORIENTED_EDGE('',*,*,#150546,.T.); +#150546 = EDGE_CURVE('',#150539,#150547,#150549,.T.); +#150547 = VERTEX_POINT('',#150548); +#150548 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#150549 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150550,#150551,#150552, + #150553),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#150550 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#150551 = CARTESIAN_POINT('',(-6.576,3.083706889526,-2.111320735334)); +#150552 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.142929375991)); +#150553 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#150554 = ORIENTED_EDGE('',*,*,#150555,.T.); +#150555 = EDGE_CURVE('',#150547,#150556,#150558,.T.); +#150556 = VERTEX_POINT('',#150557); +#150557 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#150558 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150559,#150560,#150561, + #150562),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#150559 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#150560 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.22319868713)); +#150561 = CARTESIAN_POINT('',(-6.576,3.10751734581,-2.243785893875)); +#150562 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#150563 = ORIENTED_EDGE('',*,*,#150564,.T.); +#150564 = EDGE_CURVE('',#150556,#150565,#150567,.T.); +#150565 = VERTEX_POINT('',#150566); +#150566 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#150567 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150568,#150569,#150570, + #150571),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#150568 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#150569 = CARTESIAN_POINT('',(-6.576,3.074245092488,-2.27414682503)); +#150570 = CARTESIAN_POINT('',(-6.576,3.051890297287,-2.28184103361)); +#150571 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#150572 = ORIENTED_EDGE('',*,*,#150573,.T.); +#150573 = EDGE_CURVE('',#150565,#150574,#150576,.T.); +#150574 = VERTEX_POINT('',#150575); +#150575 = CARTESIAN_POINT('',(-6.576,2.934709580118,-2.230061089378)); +#150576 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150577,#150578,#150579, + #150580),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#150577 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#150578 = CARTESIAN_POINT('',(-6.576,2.98451398431,-2.28184103361)); +#150579 = CARTESIAN_POINT('',(-6.576,2.954776907902,-2.2645810522)); +#150580 = CARTESIAN_POINT('',(-6.576,2.934709580118,-2.230061089378)); +#150581 = ORIENTED_EDGE('',*,*,#150582,.T.); +#150582 = EDGE_CURVE('',#150574,#150583,#150585,.T.); +#150583 = VERTEX_POINT('',#150584); +#150584 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.230061089378)); +#150585 = LINE('',#150586,#150587); +#150586 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.230061089378)); +#150587 = VECTOR('',#150588,1.); +#150588 = DIRECTION('',(-0.,-1.,-0.)); +#150589 = ORIENTED_EDGE('',*,*,#150590,.T.); +#150590 = EDGE_CURVE('',#150583,#150591,#150593,.T.); +#150591 = VERTEX_POINT('',#150592); +#150592 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.274978631362)); +#150593 = LINE('',#150594,#150595); +#150594 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.274978631362)); +#150595 = VECTOR('',#150596,1.); +#150596 = DIRECTION('',(-0.,-9.655044551469E-15,-1.)); +#150597 = ORIENTED_EDGE('',*,*,#150598,.T.); +#150598 = EDGE_CURVE('',#150591,#150599,#150601,.T.); +#150599 = VERTEX_POINT('',#150600); +#150600 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.274978631362)); +#150601 = LINE('',#150602,#150603); +#150602 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.274978631362)); +#150603 = VECTOR('',#150604,1.); +#150604 = DIRECTION('',(-0.,-1.,8.512202543065E-15)); +#150605 = ORIENTED_EDGE('',*,*,#150606,.T.); +#150606 = EDGE_CURVE('',#150599,#150607,#150609,.T.); +#150607 = VERTEX_POINT('',#150608); +#150608 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#150609 = LINE('',#150610,#150611); +#150610 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#150611 = VECTOR('',#150612,1.); +#150612 = DIRECTION('',(-0.,1.159894117399E-14,1.)); +#150613 = ORIENTED_EDGE('',*,*,#150614,.T.); +#150614 = EDGE_CURVE('',#150607,#150502,#150615,.T.); +#150615 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150616,#150617,#150618, + #150619),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#150616 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#150617 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.014415297533)); +#150618 = CARTESIAN_POINT('',(-6.576,2.917449598708,-1.977815818879)); +#150619 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#150620 = FACE_BOUND('',#150621,.T.); +#150621 = EDGE_LOOP('',(#150622,#150633,#150642,#150650,#150658,#150667, + #150676,#150685)); +#150622 = ORIENTED_EDGE('',*,*,#150623,.F.); +#150623 = EDGE_CURVE('',#150624,#150626,#150628,.T.); +#150624 = VERTEX_POINT('',#150625); +#150625 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#150626 = VERTEX_POINT('',#150627); +#150627 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#150628 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150629,#150630,#150631, + #150632),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#150629 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#150630 = CARTESIAN_POINT('',(-6.576,3.059584505868,-2.164972243816)); +#150631 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.177241387229)); +#150632 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#150633 = ORIENTED_EDGE('',*,*,#150634,.F.); +#150634 = EDGE_CURVE('',#150635,#150624,#150637,.T.); +#150635 = VERTEX_POINT('',#150636); +#150636 = CARTESIAN_POINT('',(-6.576,3.001358062554,-2.138354441158)); +#150637 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150638,#150639,#150640, + #150641),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150638 = CARTESIAN_POINT('',(-6.576,3.001358062554,-2.138354441158)); +#150639 = CARTESIAN_POINT('',(-6.576,3.025168518837,-2.141681666492)); +#150640 = CARTESIAN_POINT('',(-6.576,3.041596693916,-2.147504310823)); +#150641 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#150642 = ORIENTED_EDGE('',*,*,#150643,.F.); +#150643 = EDGE_CURVE('',#150644,#150635,#150646,.T.); +#150644 = VERTEX_POINT('',#150645); +#150645 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.129204571494)); +#150646 = LINE('',#150647,#150648); +#150647 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.129204571494)); +#150648 = VECTOR('',#150649,1.); +#150649 = DIRECTION('',(0.,0.9910683663,-0.133354764894)); +#150650 = ORIENTED_EDGE('',*,*,#150651,.F.); +#150651 = EDGE_CURVE('',#150652,#150644,#150654,.T.); +#150652 = VERTEX_POINT('',#150653); +#150653 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#150654 = LINE('',#150655,#150656); +#150655 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#150656 = VECTOR('',#150657,1.); +#150657 = DIRECTION('',(0.,1.556335539511E-14,1.)); +#150658 = ORIENTED_EDGE('',*,*,#150659,.F.); +#150659 = EDGE_CURVE('',#150660,#150652,#150662,.T.); +#150660 = VERTEX_POINT('',#150661); +#150661 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#150662 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150663,#150664,#150665, + #150666),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#150663 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#150664 = CARTESIAN_POINT('',(-6.576,2.940636200241,-2.200739916138)); +#150665 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.180984515729)); +#150666 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#150667 = ORIENTED_EDGE('',*,*,#150668,.F.); +#150668 = EDGE_CURVE('',#150669,#150660,#150671,.T.); +#150669 = VERTEX_POINT('',#150670); +#150670 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#150671 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150672,#150673,#150674, + #150675),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#150672 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#150673 = CARTESIAN_POINT('',(-6.576,2.988153137017,-2.240042765375)); +#150674 = CARTESIAN_POINT('',(-6.576,2.969645446107,-2.232140605211)); +#150675 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#150676 = ORIENTED_EDGE('',*,*,#150677,.F.); +#150677 = EDGE_CURVE('',#150678,#150669,#150680,.T.); +#150678 = VERTEX_POINT('',#150679); +#150679 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#150680 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150681,#150682,#150683, + #150684),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#150681 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#150682 = CARTESIAN_POINT('',(-6.576,3.039621153874,-2.235675782126)); +#150683 = CARTESIAN_POINT('',(-6.576,3.026624179921,-2.240042765375)); +#150684 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#150685 = ORIENTED_EDGE('',*,*,#150686,.F.); +#150686 = EDGE_CURVE('',#150626,#150678,#150687,.T.); +#150687 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150688,#150689,#150690, + #150691),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#150688 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#150689 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.206978463635)); +#150690 = CARTESIAN_POINT('',(-6.576,3.059272578492,-2.218207849132)); +#150691 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#150692 = PLANE('',#150693); +#150693 = AXIS2_PLACEMENT_3D('',#150694,#150695,#150696); +#150694 = CARTESIAN_POINT('',(-6.576,3.040829872452,-1.984548251387)); +#150695 = DIRECTION('',(-1.,0.,0.)); +#150696 = DIRECTION('',(0.,0.,1.)); +#150697 = ADVANCED_FACE('',(#150698,#150820),#150892,.F.); +#150698 = FACE_BOUND('',#150699,.T.); +#150699 = EDGE_LOOP('',(#150700,#150711,#150720,#150728,#150736,#150744, + #150752,#150761,#150770,#150779,#150788,#150796,#150805,#150814)); +#150700 = ORIENTED_EDGE('',*,*,#150701,.F.); +#150701 = EDGE_CURVE('',#150702,#150704,#150706,.T.); +#150702 = VERTEX_POINT('',#150703); +#150703 = CARTESIAN_POINT('',(-6.575,2.987425306475,-1.977815818879)); +#150704 = VERTEX_POINT('',#150705); +#150705 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.004849524703)); +#150706 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150707,#150708,#150709, + #150710),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150707 = CARTESIAN_POINT('',(-6.575,2.987425306475,-1.977815818879)); +#150708 = CARTESIAN_POINT('',(-6.575,3.025272494629,-1.977815818879)); +#150709 = CARTESIAN_POINT('',(-6.575,3.058648723743,-1.98675773696)); +#150710 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.004849524703)); +#150711 = ORIENTED_EDGE('',*,*,#150712,.F.); +#150712 = EDGE_CURVE('',#150713,#150702,#150715,.T.); +#150713 = VERTEX_POINT('',#150714); +#150714 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.088030158011)); +#150715 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150716,#150717,#150718, + #150719),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#150716 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.088030158011)); +#150717 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.014415297533)); +#150718 = CARTESIAN_POINT('',(-6.575,2.917449598708,-1.977815818879)); +#150719 = CARTESIAN_POINT('',(-6.575,2.987425306475,-1.977815818879)); +#150720 = ORIENTED_EDGE('',*,*,#150721,.F.); +#150721 = EDGE_CURVE('',#150722,#150713,#150724,.T.); +#150722 = VERTEX_POINT('',#150723); +#150723 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.274978631362)); +#150724 = LINE('',#150725,#150726); +#150725 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.088030158011)); +#150726 = VECTOR('',#150727,1.); +#150727 = DIRECTION('',(-0.,1.159894117399E-14,1.)); +#150728 = ORIENTED_EDGE('',*,*,#150729,.F.); +#150729 = EDGE_CURVE('',#150730,#150722,#150732,.T.); +#150730 = VERTEX_POINT('',#150731); +#150731 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.274978631362)); +#150732 = LINE('',#150733,#150734); +#150733 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.274978631362)); +#150734 = VECTOR('',#150735,1.); +#150735 = DIRECTION('',(-0.,-1.,8.512202543065E-15)); +#150736 = ORIENTED_EDGE('',*,*,#150737,.F.); +#150737 = EDGE_CURVE('',#150738,#150730,#150740,.T.); +#150738 = VERTEX_POINT('',#150739); +#150739 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.230061089378)); +#150740 = LINE('',#150741,#150742); +#150741 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.274978631362)); +#150742 = VECTOR('',#150743,1.); +#150743 = DIRECTION('',(-0.,-9.655044551469E-15,-1.)); +#150744 = ORIENTED_EDGE('',*,*,#150745,.F.); +#150745 = EDGE_CURVE('',#150746,#150738,#150748,.T.); +#150746 = VERTEX_POINT('',#150747); +#150747 = CARTESIAN_POINT('',(-6.575,2.934709580118,-2.230061089378)); +#150748 = LINE('',#150749,#150750); +#150749 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.230061089378)); +#150750 = VECTOR('',#150751,1.); +#150751 = DIRECTION('',(-0.,-1.,-0.)); +#150752 = ORIENTED_EDGE('',*,*,#150753,.F.); +#150753 = EDGE_CURVE('',#150754,#150746,#150756,.T.); +#150754 = VERTEX_POINT('',#150755); +#150755 = CARTESIAN_POINT('',(-6.575,3.023712857755,-2.28184103361)); +#150756 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150757,#150758,#150759, + #150760),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#150757 = CARTESIAN_POINT('',(-6.575,3.023712857755,-2.28184103361)); +#150758 = CARTESIAN_POINT('',(-6.575,2.98451398431,-2.28184103361)); +#150759 = CARTESIAN_POINT('',(-6.575,2.954776907902,-2.2645810522)); +#150760 = CARTESIAN_POINT('',(-6.575,2.934709580118,-2.230061089378)); +#150761 = ORIENTED_EDGE('',*,*,#150762,.F.); +#150762 = EDGE_CURVE('',#150763,#150754,#150765,.T.); +#150763 = VERTEX_POINT('',#150764); +#150764 = CARTESIAN_POINT('',(-6.575,3.090881219148,-2.258966359452)); +#150765 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150766,#150767,#150768, + #150769),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#150766 = CARTESIAN_POINT('',(-6.575,3.090881219148,-2.258966359452)); +#150767 = CARTESIAN_POINT('',(-6.575,3.074245092488,-2.27414682503)); +#150768 = CARTESIAN_POINT('',(-6.575,3.051890297287,-2.28184103361)); +#150769 = CARTESIAN_POINT('',(-6.575,3.023712857755,-2.28184103361)); +#150770 = ORIENTED_EDGE('',*,*,#150771,.F.); +#150771 = EDGE_CURVE('',#150772,#150763,#150774,.T.); +#150772 = VERTEX_POINT('',#150773); +#150773 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.197204739221)); +#150774 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150775,#150776,#150777, + #150778),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#150775 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.197204739221)); +#150776 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.22319868713)); +#150777 = CARTESIAN_POINT('',(-6.575,3.10751734581,-2.243785893875)); +#150778 = CARTESIAN_POINT('',(-6.575,3.090881219148,-2.258966359452)); +#150779 = ORIENTED_EDGE('',*,*,#150780,.F.); +#150780 = EDGE_CURVE('',#150781,#150772,#150783,.T.); +#150781 = VERTEX_POINT('',#150782); +#150782 = CARTESIAN_POINT('',(-6.575,3.019449850298,-2.102378817253)); +#150783 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150784,#150785,#150786, + #150787),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#150784 = CARTESIAN_POINT('',(-6.575,3.019449850298,-2.102378817253)); +#150785 = CARTESIAN_POINT('',(-6.575,3.083706889526,-2.111320735334)); +#150786 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.142929375991)); +#150787 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.197204739221)); +#150788 = ORIENTED_EDGE('',*,*,#150789,.F.); +#150789 = EDGE_CURVE('',#150790,#150781,#150792,.T.); +#150790 = VERTEX_POINT('',#150791); +#150791 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.090317625424)); +#150792 = LINE('',#150793,#150794); +#150793 = CARTESIAN_POINT('',(-6.575,3.019449850298,-2.102378817253)); +#150794 = VECTOR('',#150795,1.); +#150795 = DIRECTION('',(-0.,0.990328603988,-0.138741688482)); +#150796 = ORIENTED_EDGE('',*,*,#150797,.F.); +#150797 = EDGE_CURVE('',#150798,#150790,#150800,.T.); +#150798 = VERTEX_POINT('',#150799); +#150799 = CARTESIAN_POINT('',(-6.575,2.99220819289,-2.019198183948)); +#150800 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150801,#150802,#150803, + #150804),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#150801 = CARTESIAN_POINT('',(-6.575,2.99220819289,-2.019198183948)); +#150802 = CARTESIAN_POINT('',(-6.575,2.953009319445,-2.019198183948)); +#150803 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.042904664441)); +#150804 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.090317625424)); +#150805 = ORIENTED_EDGE('',*,*,#150806,.F.); +#150806 = EDGE_CURVE('',#150807,#150798,#150809,.T.); +#150807 = VERTEX_POINT('',#150808); +#150808 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.054342001521)); +#150809 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150810,#150811,#150812, + #150813),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#150810 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.054342001521)); +#150811 = CARTESIAN_POINT('',(-6.575,3.058752699535,-2.031051424195)); +#150812 = CARTESIAN_POINT('',(-6.575,3.027040083087,-2.019198183948)); +#150813 = CARTESIAN_POINT('',(-6.575,2.99220819289,-2.019198183948)); +#150814 = ORIENTED_EDGE('',*,*,#150815,.F.); +#150815 = EDGE_CURVE('',#150704,#150807,#150816,.T.); +#150816 = LINE('',#150817,#150818); +#150817 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.054342001521)); +#150818 = VECTOR('',#150819,1.); +#150819 = DIRECTION('',(-0.,-1.752512288219E-14,-1.)); +#150820 = FACE_BOUND('',#150821,.T.); +#150821 = EDGE_LOOP('',(#150822,#150833,#150842,#150851,#150860,#150869, + #150878,#150886)); +#150822 = ORIENTED_EDGE('',*,*,#150823,.T.); +#150823 = EDGE_CURVE('',#150824,#150826,#150828,.T.); +#150824 = VERTEX_POINT('',#150825); +#150825 = CARTESIAN_POINT('',(-6.575,3.001358062554,-2.138354441158)); +#150826 = VERTEX_POINT('',#150827); +#150827 = CARTESIAN_POINT('',(-6.575,3.050642587787,-2.156238277321)); +#150828 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150829,#150830,#150831, + #150832),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150829 = CARTESIAN_POINT('',(-6.575,3.001358062554,-2.138354441158)); +#150830 = CARTESIAN_POINT('',(-6.575,3.025168518837,-2.141681666492)); +#150831 = CARTESIAN_POINT('',(-6.575,3.041596693916,-2.147504310823)); +#150832 = CARTESIAN_POINT('',(-6.575,3.050642587787,-2.156238277321)); +#150833 = ORIENTED_EDGE('',*,*,#150834,.T.); +#150834 = EDGE_CURVE('',#150826,#150835,#150837,.T.); +#150835 = VERTEX_POINT('',#150836); +#150836 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.193045707558)); +#150837 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150838,#150839,#150840, + #150841),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#150838 = CARTESIAN_POINT('',(-6.575,3.050642587787,-2.156238277321)); +#150839 = CARTESIAN_POINT('',(-6.575,3.059584505868,-2.164972243816)); +#150840 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.177241387229)); +#150841 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.193045707558)); +#150842 = ORIENTED_EDGE('',*,*,#150843,.T.); +#150843 = EDGE_CURVE('',#150835,#150844,#150846,.T.); +#150844 = VERTEX_POINT('',#150845); +#150845 = CARTESIAN_POINT('',(-6.575,3.049394878288,-2.22694181563)); +#150846 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150847,#150848,#150849, + #150850),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#150847 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.193045707558)); +#150848 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.206978463635)); +#150849 = CARTESIAN_POINT('',(-6.575,3.059272578492,-2.218207849132)); +#150850 = CARTESIAN_POINT('',(-6.575,3.049394878288,-2.22694181563)); +#150851 = ORIENTED_EDGE('',*,*,#150852,.T.); +#150852 = EDGE_CURVE('',#150844,#150853,#150855,.T.); +#150853 = VERTEX_POINT('',#150854); +#150854 = CARTESIAN_POINT('',(-6.575,3.010507932217,-2.240042765375)); +#150855 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150856,#150857,#150858, + #150859),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#150856 = CARTESIAN_POINT('',(-6.575,3.049394878288,-2.22694181563)); +#150857 = CARTESIAN_POINT('',(-6.575,3.039621153874,-2.235675782126)); +#150858 = CARTESIAN_POINT('',(-6.575,3.026624179921,-2.240042765375)); +#150859 = CARTESIAN_POINT('',(-6.575,3.010507932217,-2.240042765375)); +#150860 = ORIENTED_EDGE('',*,*,#150861,.T.); +#150861 = EDGE_CURVE('',#150853,#150862,#150864,.T.); +#150862 = VERTEX_POINT('',#150863); +#150863 = CARTESIAN_POINT('',(-6.575,2.95519281107,-2.216336284882)); +#150864 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150865,#150866,#150867, + #150868),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#150865 = CARTESIAN_POINT('',(-6.575,3.010507932217,-2.240042765375)); +#150866 = CARTESIAN_POINT('',(-6.575,2.988153137017,-2.240042765375)); +#150867 = CARTESIAN_POINT('',(-6.575,2.969645446107,-2.232140605211)); +#150868 = CARTESIAN_POINT('',(-6.575,2.95519281107,-2.216336284882)); +#150869 = ORIENTED_EDGE('',*,*,#150870,.T.); +#150870 = EDGE_CURVE('',#150862,#150871,#150873,.T.); +#150871 = VERTEX_POINT('',#150872); +#150872 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.157070083653)); +#150873 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#150874,#150875,#150876, + #150877),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#150874 = CARTESIAN_POINT('',(-6.575,2.95519281107,-2.216336284882)); +#150875 = CARTESIAN_POINT('',(-6.575,2.940636200241,-2.200739916138)); +#150876 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.180984515729)); +#150877 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.157070083653)); +#150878 = ORIENTED_EDGE('',*,*,#150879,.T.); +#150879 = EDGE_CURVE('',#150871,#150880,#150882,.T.); +#150880 = VERTEX_POINT('',#150881); +#150881 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.129204571494)); +#150882 = LINE('',#150883,#150884); +#150883 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.157070083653)); +#150884 = VECTOR('',#150885,1.); +#150885 = DIRECTION('',(0.,1.556335539511E-14,1.)); +#150886 = ORIENTED_EDGE('',*,*,#150887,.T.); +#150887 = EDGE_CURVE('',#150880,#150824,#150888,.T.); +#150888 = LINE('',#150889,#150890); +#150889 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.129204571494)); +#150890 = VECTOR('',#150891,1.); +#150891 = DIRECTION('',(0.,0.9910683663,-0.133354764894)); +#150892 = PLANE('',#150893); +#150893 = AXIS2_PLACEMENT_3D('',#150894,#150895,#150896); +#150894 = CARTESIAN_POINT('',(-6.575,3.040829872452,-1.984548251387)); +#150895 = DIRECTION('',(-1.,0.,0.)); +#150896 = DIRECTION('',(0.,0.,1.)); +#150897 = ADVANCED_FACE('',(#150898),#150914,.F.); +#150898 = FACE_BOUND('',#150899,.F.); +#150899 = EDGE_LOOP('',(#150900,#150906,#150907,#150913)); +#150900 = ORIENTED_EDGE('',*,*,#150901,.F.); +#150901 = EDGE_CURVE('',#150502,#150702,#150902,.T.); +#150902 = LINE('',#150903,#150904); +#150903 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#150904 = VECTOR('',#150905,1.); +#150905 = DIRECTION('',(1.,-0.,-0.)); +#150906 = ORIENTED_EDGE('',*,*,#150501,.T.); +#150907 = ORIENTED_EDGE('',*,*,#150908,.T.); +#150908 = EDGE_CURVE('',#150504,#150704,#150909,.T.); +#150909 = LINE('',#150910,#150911); +#150910 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.004849524703)); +#150911 = VECTOR('',#150912,1.); +#150912 = DIRECTION('',(1.,-0.,-0.)); +#150913 = ORIENTED_EDGE('',*,*,#150701,.F.); +#150914 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#150915,#150916) + ,(#150917,#150918) + ,(#150919,#150920) + ,(#150921,#150922 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150915 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#150916 = CARTESIAN_POINT('',(-6.575,2.987425306475,-1.977815818879)); +#150917 = CARTESIAN_POINT('',(-6.576,3.025272494629,-1.977815818879)); +#150918 = CARTESIAN_POINT('',(-6.575,3.025272494629,-1.977815818879)); +#150919 = CARTESIAN_POINT('',(-6.576,3.058648723743,-1.98675773696)); +#150920 = CARTESIAN_POINT('',(-6.575,3.058648723743,-1.98675773696)); +#150921 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.004849524703)); +#150922 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.004849524703)); +#150923 = ADVANCED_FACE('',(#150924),#150935,.F.); +#150924 = FACE_BOUND('',#150925,.T.); +#150925 = EDGE_LOOP('',(#150926,#150927,#150933,#150934)); +#150926 = ORIENTED_EDGE('',*,*,#150815,.T.); +#150927 = ORIENTED_EDGE('',*,*,#150928,.F.); +#150928 = EDGE_CURVE('',#150513,#150807,#150929,.T.); +#150929 = LINE('',#150930,#150931); +#150930 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150931 = VECTOR('',#150932,1.); +#150932 = DIRECTION('',(1.,-0.,-0.)); +#150933 = ORIENTED_EDGE('',*,*,#150512,.F.); +#150934 = ORIENTED_EDGE('',*,*,#150908,.T.); +#150935 = PLANE('',#150936); +#150936 = AXIS2_PLACEMENT_3D('',#150937,#150938,#150939); +#150937 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150938 = DIRECTION('',(0.,-1.,1.752512288219E-14)); +#150939 = DIRECTION('',(0.,-1.752512288219E-14,-1.)); +#150940 = ADVANCED_FACE('',(#150941),#150952,.F.); +#150941 = FACE_BOUND('',#150942,.F.); +#150942 = EDGE_LOOP('',(#150943,#150944,#150945,#150951)); +#150943 = ORIENTED_EDGE('',*,*,#150928,.F.); +#150944 = ORIENTED_EDGE('',*,*,#150520,.T.); +#150945 = ORIENTED_EDGE('',*,*,#150946,.T.); +#150946 = EDGE_CURVE('',#150521,#150798,#150947,.T.); +#150947 = LINE('',#150948,#150949); +#150948 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150949 = VECTOR('',#150950,1.); +#150950 = DIRECTION('',(1.,-0.,-0.)); +#150951 = ORIENTED_EDGE('',*,*,#150806,.F.); +#150952 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#150953,#150954) + ,(#150955,#150956) + ,(#150957,#150958) + ,(#150959,#150960 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150953 = CARTESIAN_POINT('',(-6.576,3.087450018026,-2.054342001521)); +#150954 = CARTESIAN_POINT('',(-6.575,3.087450018026,-2.054342001521)); +#150955 = CARTESIAN_POINT('',(-6.576,3.058752699535,-2.031051424195)); +#150956 = CARTESIAN_POINT('',(-6.575,3.058752699535,-2.031051424195)); +#150957 = CARTESIAN_POINT('',(-6.576,3.027040083087,-2.019198183948)); +#150958 = CARTESIAN_POINT('',(-6.575,3.027040083087,-2.019198183948)); +#150959 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150960 = CARTESIAN_POINT('',(-6.575,2.99220819289,-2.019198183948)); +#150961 = ADVANCED_FACE('',(#150962),#150973,.F.); +#150962 = FACE_BOUND('',#150963,.F.); +#150963 = EDGE_LOOP('',(#150964,#150965,#150966,#150972)); +#150964 = ORIENTED_EDGE('',*,*,#150946,.F.); +#150965 = ORIENTED_EDGE('',*,*,#150529,.T.); +#150966 = ORIENTED_EDGE('',*,*,#150967,.T.); +#150967 = EDGE_CURVE('',#150530,#150790,#150968,.T.); +#150968 = LINE('',#150969,#150970); +#150969 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.090317625424)); +#150970 = VECTOR('',#150971,1.); +#150971 = DIRECTION('',(1.,-0.,-0.)); +#150972 = ORIENTED_EDGE('',*,*,#150797,.F.); +#150973 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#150974,#150975) + ,(#150976,#150977) + ,(#150978,#150979) + ,(#150980,#150981 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#150974 = CARTESIAN_POINT('',(-6.576,2.99220819289,-2.019198183948)); +#150975 = CARTESIAN_POINT('',(-6.575,2.99220819289,-2.019198183948)); +#150976 = CARTESIAN_POINT('',(-6.576,2.953009319445,-2.019198183948)); +#150977 = CARTESIAN_POINT('',(-6.575,2.953009319445,-2.019198183948)); +#150978 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.042904664441)); +#150979 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.042904664441)); +#150980 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.090317625424)); +#150981 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.090317625424)); +#150982 = ADVANCED_FACE('',(#150983),#150994,.F.); +#150983 = FACE_BOUND('',#150984,.T.); +#150984 = EDGE_LOOP('',(#150985,#150986,#150992,#150993)); +#150985 = ORIENTED_EDGE('',*,*,#150789,.T.); +#150986 = ORIENTED_EDGE('',*,*,#150987,.F.); +#150987 = EDGE_CURVE('',#150539,#150781,#150988,.T.); +#150988 = LINE('',#150989,#150990); +#150989 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#150990 = VECTOR('',#150991,1.); +#150991 = DIRECTION('',(1.,-0.,-0.)); +#150992 = ORIENTED_EDGE('',*,*,#150538,.F.); +#150993 = ORIENTED_EDGE('',*,*,#150967,.T.); +#150994 = PLANE('',#150995); +#150995 = AXIS2_PLACEMENT_3D('',#150996,#150997,#150998); +#150996 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#150997 = DIRECTION('',(0.,-0.138741688482,-0.990328603988)); +#150998 = DIRECTION('',(0.,0.990328603988,-0.138741688482)); +#150999 = ADVANCED_FACE('',(#151000),#151011,.F.); +#151000 = FACE_BOUND('',#151001,.F.); +#151001 = EDGE_LOOP('',(#151002,#151003,#151004,#151010)); +#151002 = ORIENTED_EDGE('',*,*,#150987,.F.); +#151003 = ORIENTED_EDGE('',*,*,#150546,.T.); +#151004 = ORIENTED_EDGE('',*,*,#151005,.T.); +#151005 = EDGE_CURVE('',#150547,#150772,#151006,.T.); +#151006 = LINE('',#151007,#151008); +#151007 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#151008 = VECTOR('',#151009,1.); +#151009 = DIRECTION('',(1.,-0.,-0.)); +#151010 = ORIENTED_EDGE('',*,*,#150780,.F.); +#151011 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151012,#151013) + ,(#151014,#151015) + ,(#151016,#151017) + ,(#151018,#151019 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151012 = CARTESIAN_POINT('',(-6.576,3.019449850298,-2.102378817253)); +#151013 = CARTESIAN_POINT('',(-6.575,3.019449850298,-2.102378817253)); +#151014 = CARTESIAN_POINT('',(-6.576,3.083706889526,-2.111320735334)); +#151015 = CARTESIAN_POINT('',(-6.575,3.083706889526,-2.111320735334)); +#151016 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.142929375991)); +#151017 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.142929375991)); +#151018 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#151019 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.197204739221)); +#151020 = ADVANCED_FACE('',(#151021),#151032,.F.); +#151021 = FACE_BOUND('',#151022,.F.); +#151022 = EDGE_LOOP('',(#151023,#151024,#151025,#151031)); +#151023 = ORIENTED_EDGE('',*,*,#151005,.F.); +#151024 = ORIENTED_EDGE('',*,*,#150555,.T.); +#151025 = ORIENTED_EDGE('',*,*,#151026,.T.); +#151026 = EDGE_CURVE('',#150556,#150763,#151027,.T.); +#151027 = LINE('',#151028,#151029); +#151028 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#151029 = VECTOR('',#151030,1.); +#151030 = DIRECTION('',(1.,-0.,-0.)); +#151031 = ORIENTED_EDGE('',*,*,#150771,.F.); +#151032 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151033,#151034) + ,(#151035,#151036) + ,(#151037,#151038) + ,(#151039,#151040 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151033 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.197204739221)); +#151034 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.197204739221)); +#151035 = CARTESIAN_POINT('',(-6.576,3.115835409141,-2.22319868713)); +#151036 = CARTESIAN_POINT('',(-6.575,3.115835409141,-2.22319868713)); +#151037 = CARTESIAN_POINT('',(-6.576,3.10751734581,-2.243785893875)); +#151038 = CARTESIAN_POINT('',(-6.575,3.10751734581,-2.243785893875)); +#151039 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#151040 = CARTESIAN_POINT('',(-6.575,3.090881219148,-2.258966359452)); +#151041 = ADVANCED_FACE('',(#151042),#151053,.F.); +#151042 = FACE_BOUND('',#151043,.F.); +#151043 = EDGE_LOOP('',(#151044,#151045,#151046,#151052)); +#151044 = ORIENTED_EDGE('',*,*,#151026,.F.); +#151045 = ORIENTED_EDGE('',*,*,#150564,.T.); +#151046 = ORIENTED_EDGE('',*,*,#151047,.T.); +#151047 = EDGE_CURVE('',#150565,#150754,#151048,.T.); +#151048 = LINE('',#151049,#151050); +#151049 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#151050 = VECTOR('',#151051,1.); +#151051 = DIRECTION('',(1.,-0.,-0.)); +#151052 = ORIENTED_EDGE('',*,*,#150762,.F.); +#151053 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151054,#151055) + ,(#151056,#151057) + ,(#151058,#151059) + ,(#151060,#151061 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151054 = CARTESIAN_POINT('',(-6.576,3.090881219148,-2.258966359452)); +#151055 = CARTESIAN_POINT('',(-6.575,3.090881219148,-2.258966359452)); +#151056 = CARTESIAN_POINT('',(-6.576,3.074245092488,-2.27414682503)); +#151057 = CARTESIAN_POINT('',(-6.575,3.074245092488,-2.27414682503)); +#151058 = CARTESIAN_POINT('',(-6.576,3.051890297287,-2.28184103361)); +#151059 = CARTESIAN_POINT('',(-6.575,3.051890297287,-2.28184103361)); +#151060 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#151061 = CARTESIAN_POINT('',(-6.575,3.023712857755,-2.28184103361)); +#151062 = ADVANCED_FACE('',(#151063),#151074,.F.); +#151063 = FACE_BOUND('',#151064,.F.); +#151064 = EDGE_LOOP('',(#151065,#151066,#151067,#151073)); +#151065 = ORIENTED_EDGE('',*,*,#151047,.F.); +#151066 = ORIENTED_EDGE('',*,*,#150573,.T.); +#151067 = ORIENTED_EDGE('',*,*,#151068,.T.); +#151068 = EDGE_CURVE('',#150574,#150746,#151069,.T.); +#151069 = LINE('',#151070,#151071); +#151070 = CARTESIAN_POINT('',(-6.576,2.934709580118,-2.230061089378)); +#151071 = VECTOR('',#151072,1.); +#151072 = DIRECTION('',(1.,-0.,-0.)); +#151073 = ORIENTED_EDGE('',*,*,#150753,.F.); +#151074 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151075,#151076) + ,(#151077,#151078) + ,(#151079,#151080) + ,(#151081,#151082 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151075 = CARTESIAN_POINT('',(-6.576,3.023712857755,-2.28184103361)); +#151076 = CARTESIAN_POINT('',(-6.575,3.023712857755,-2.28184103361)); +#151077 = CARTESIAN_POINT('',(-6.576,2.98451398431,-2.28184103361)); +#151078 = CARTESIAN_POINT('',(-6.575,2.98451398431,-2.28184103361)); +#151079 = CARTESIAN_POINT('',(-6.576,2.954776907902,-2.2645810522)); +#151080 = CARTESIAN_POINT('',(-6.575,2.954776907902,-2.2645810522)); +#151081 = CARTESIAN_POINT('',(-6.576,2.934709580118,-2.230061089378)); +#151082 = CARTESIAN_POINT('',(-6.575,2.934709580118,-2.230061089378)); +#151083 = ADVANCED_FACE('',(#151084),#151095,.F.); +#151084 = FACE_BOUND('',#151085,.T.); +#151085 = EDGE_LOOP('',(#151086,#151087,#151093,#151094)); +#151086 = ORIENTED_EDGE('',*,*,#150745,.T.); +#151087 = ORIENTED_EDGE('',*,*,#151088,.F.); +#151088 = EDGE_CURVE('',#150583,#150738,#151089,.T.); +#151089 = LINE('',#151090,#151091); +#151090 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.230061089378)); +#151091 = VECTOR('',#151092,1.); +#151092 = DIRECTION('',(1.,-0.,-0.)); +#151093 = ORIENTED_EDGE('',*,*,#150582,.F.); +#151094 = ORIENTED_EDGE('',*,*,#151068,.T.); +#151095 = PLANE('',#151096); +#151096 = AXIS2_PLACEMENT_3D('',#151097,#151098,#151099); +#151097 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.230061089378)); +#151098 = DIRECTION('',(0.,-0.,1.)); +#151099 = DIRECTION('',(1.,0.,0.)); +#151100 = ADVANCED_FACE('',(#151101),#151112,.F.); +#151101 = FACE_BOUND('',#151102,.T.); +#151102 = EDGE_LOOP('',(#151103,#151104,#151110,#151111)); +#151103 = ORIENTED_EDGE('',*,*,#150737,.T.); +#151104 = ORIENTED_EDGE('',*,*,#151105,.F.); +#151105 = EDGE_CURVE('',#150591,#150730,#151106,.T.); +#151106 = LINE('',#151107,#151108); +#151107 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.274978631362)); +#151108 = VECTOR('',#151109,1.); +#151109 = DIRECTION('',(1.,-0.,-0.)); +#151110 = ORIENTED_EDGE('',*,*,#150590,.F.); +#151111 = ORIENTED_EDGE('',*,*,#151088,.T.); +#151112 = PLANE('',#151113); +#151113 = AXIS2_PLACEMENT_3D('',#151114,#151115,#151116); +#151114 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.274978631362)); +#151115 = DIRECTION('',(0.,-1.,9.655044551469E-15)); +#151116 = DIRECTION('',(0.,-9.655044551469E-15,-1.)); +#151117 = ADVANCED_FACE('',(#151118),#151129,.F.); +#151118 = FACE_BOUND('',#151119,.T.); +#151119 = EDGE_LOOP('',(#151120,#151121,#151127,#151128)); +#151120 = ORIENTED_EDGE('',*,*,#150729,.T.); +#151121 = ORIENTED_EDGE('',*,*,#151122,.F.); +#151122 = EDGE_CURVE('',#150599,#150722,#151123,.T.); +#151123 = LINE('',#151124,#151125); +#151124 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.274978631362)); +#151125 = VECTOR('',#151126,1.); +#151126 = DIRECTION('',(1.,-0.,-0.)); +#151127 = ORIENTED_EDGE('',*,*,#150598,.F.); +#151128 = ORIENTED_EDGE('',*,*,#151105,.T.); +#151129 = PLANE('',#151130); +#151130 = AXIS2_PLACEMENT_3D('',#151131,#151132,#151133); +#151131 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.274978631362)); +#151132 = DIRECTION('',(0.,8.512202543065E-15,1.)); +#151133 = DIRECTION('',(0.,-1.,8.512202543065E-15)); +#151134 = ADVANCED_FACE('',(#151135),#151146,.F.); +#151135 = FACE_BOUND('',#151136,.T.); +#151136 = EDGE_LOOP('',(#151137,#151138,#151144,#151145)); +#151137 = ORIENTED_EDGE('',*,*,#150721,.T.); +#151138 = ORIENTED_EDGE('',*,*,#151139,.F.); +#151139 = EDGE_CURVE('',#150607,#150713,#151140,.T.); +#151140 = LINE('',#151141,#151142); +#151141 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#151142 = VECTOR('',#151143,1.); +#151143 = DIRECTION('',(1.,-0.,-0.)); +#151144 = ORIENTED_EDGE('',*,*,#150606,.F.); +#151145 = ORIENTED_EDGE('',*,*,#151122,.T.); +#151146 = PLANE('',#151147); +#151147 = AXIS2_PLACEMENT_3D('',#151148,#151149,#151150); +#151148 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#151149 = DIRECTION('',(0.,1.,-1.159894117399E-14)); +#151150 = DIRECTION('',(0.,1.159894117399E-14,1.)); +#151151 = ADVANCED_FACE('',(#151152),#151158,.F.); +#151152 = FACE_BOUND('',#151153,.F.); +#151153 = EDGE_LOOP('',(#151154,#151155,#151156,#151157)); +#151154 = ORIENTED_EDGE('',*,*,#151139,.F.); +#151155 = ORIENTED_EDGE('',*,*,#150614,.T.); +#151156 = ORIENTED_EDGE('',*,*,#150901,.T.); +#151157 = ORIENTED_EDGE('',*,*,#150712,.F.); +#151158 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151159,#151160) + ,(#151161,#151162) + ,(#151163,#151164) + ,(#151165,#151166 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151159 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.088030158011)); +#151160 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.088030158011)); +#151161 = CARTESIAN_POINT('',(-6.576,2.882409756927,-2.014415297533)); +#151162 = CARTESIAN_POINT('',(-6.575,2.882409756927,-2.014415297533)); +#151163 = CARTESIAN_POINT('',(-6.576,2.917449598708,-1.977815818879)); +#151164 = CARTESIAN_POINT('',(-6.575,2.917449598708,-1.977815818879)); +#151165 = CARTESIAN_POINT('',(-6.576,2.987425306475,-1.977815818879)); +#151166 = CARTESIAN_POINT('',(-6.575,2.987425306475,-1.977815818879)); +#151167 = ADVANCED_FACE('',(#151168),#151184,.T.); +#151168 = FACE_BOUND('',#151169,.T.); +#151169 = EDGE_LOOP('',(#151170,#151171,#151177,#151178)); +#151170 = ORIENTED_EDGE('',*,*,#150823,.F.); +#151171 = ORIENTED_EDGE('',*,*,#151172,.F.); +#151172 = EDGE_CURVE('',#150635,#150824,#151173,.T.); +#151173 = LINE('',#151174,#151175); +#151174 = CARTESIAN_POINT('',(-6.576,3.001358062554,-2.138354441158)); +#151175 = VECTOR('',#151176,1.); +#151176 = DIRECTION('',(1.,-0.,-0.)); +#151177 = ORIENTED_EDGE('',*,*,#150634,.T.); +#151178 = ORIENTED_EDGE('',*,*,#151179,.T.); +#151179 = EDGE_CURVE('',#150624,#150826,#151180,.T.); +#151180 = LINE('',#151181,#151182); +#151181 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#151182 = VECTOR('',#151183,1.); +#151183 = DIRECTION('',(1.,-0.,-0.)); +#151184 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151185,#151186) + ,(#151187,#151188) + ,(#151189,#151190) + ,(#151191,#151192 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151185 = CARTESIAN_POINT('',(-6.576,3.001358062554,-2.138354441158)); +#151186 = CARTESIAN_POINT('',(-6.575,3.001358062554,-2.138354441158)); +#151187 = CARTESIAN_POINT('',(-6.576,3.025168518837,-2.141681666492)); +#151188 = CARTESIAN_POINT('',(-6.575,3.025168518837,-2.141681666492)); +#151189 = CARTESIAN_POINT('',(-6.576,3.041596693916,-2.147504310823)); +#151190 = CARTESIAN_POINT('',(-6.575,3.041596693916,-2.147504310823)); +#151191 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#151192 = CARTESIAN_POINT('',(-6.575,3.050642587787,-2.156238277321)); +#151193 = ADVANCED_FACE('',(#151194),#151205,.T.); +#151194 = FACE_BOUND('',#151195,.T.); +#151195 = EDGE_LOOP('',(#151196,#151197,#151198,#151199)); +#151196 = ORIENTED_EDGE('',*,*,#150834,.F.); +#151197 = ORIENTED_EDGE('',*,*,#151179,.F.); +#151198 = ORIENTED_EDGE('',*,*,#150623,.T.); +#151199 = ORIENTED_EDGE('',*,*,#151200,.T.); +#151200 = EDGE_CURVE('',#150626,#150835,#151201,.T.); +#151201 = LINE('',#151202,#151203); +#151202 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#151203 = VECTOR('',#151204,1.); +#151204 = DIRECTION('',(1.,-0.,-0.)); +#151205 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151206,#151207) + ,(#151208,#151209) + ,(#151210,#151211) + ,(#151212,#151213 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151206 = CARTESIAN_POINT('',(-6.576,3.050642587787,-2.156238277321)); +#151207 = CARTESIAN_POINT('',(-6.575,3.050642587787,-2.156238277321)); +#151208 = CARTESIAN_POINT('',(-6.576,3.059584505868,-2.164972243816)); +#151209 = CARTESIAN_POINT('',(-6.575,3.059584505868,-2.164972243816)); +#151210 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.177241387229)); +#151211 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.177241387229)); +#151212 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#151213 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.193045707558)); +#151214 = ADVANCED_FACE('',(#151215),#151226,.T.); +#151215 = FACE_BOUND('',#151216,.T.); +#151216 = EDGE_LOOP('',(#151217,#151218,#151219,#151220)); +#151217 = ORIENTED_EDGE('',*,*,#150843,.F.); +#151218 = ORIENTED_EDGE('',*,*,#151200,.F.); +#151219 = ORIENTED_EDGE('',*,*,#150686,.T.); +#151220 = ORIENTED_EDGE('',*,*,#151221,.T.); +#151221 = EDGE_CURVE('',#150678,#150844,#151222,.T.); +#151222 = LINE('',#151223,#151224); +#151223 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#151224 = VECTOR('',#151225,1.); +#151225 = DIRECTION('',(1.,-0.,-0.)); +#151226 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151227,#151228) + ,(#151229,#151230) + ,(#151231,#151232) + ,(#151233,#151234 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151227 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.193045707558)); +#151228 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.193045707558)); +#151229 = CARTESIAN_POINT('',(-6.576,3.064159440699,-2.206978463635)); +#151230 = CARTESIAN_POINT('',(-6.575,3.064159440699,-2.206978463635)); +#151231 = CARTESIAN_POINT('',(-6.576,3.059272578492,-2.218207849132)); +#151232 = CARTESIAN_POINT('',(-6.575,3.059272578492,-2.218207849132)); +#151233 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#151234 = CARTESIAN_POINT('',(-6.575,3.049394878288,-2.22694181563)); +#151235 = ADVANCED_FACE('',(#151236),#151247,.T.); +#151236 = FACE_BOUND('',#151237,.T.); +#151237 = EDGE_LOOP('',(#151238,#151239,#151240,#151241)); +#151238 = ORIENTED_EDGE('',*,*,#150852,.F.); +#151239 = ORIENTED_EDGE('',*,*,#151221,.F.); +#151240 = ORIENTED_EDGE('',*,*,#150677,.T.); +#151241 = ORIENTED_EDGE('',*,*,#151242,.T.); +#151242 = EDGE_CURVE('',#150669,#150853,#151243,.T.); +#151243 = LINE('',#151244,#151245); +#151244 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#151245 = VECTOR('',#151246,1.); +#151246 = DIRECTION('',(1.,-0.,-0.)); +#151247 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151248,#151249) + ,(#151250,#151251) + ,(#151252,#151253) + ,(#151254,#151255 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151248 = CARTESIAN_POINT('',(-6.576,3.049394878288,-2.22694181563)); +#151249 = CARTESIAN_POINT('',(-6.575,3.049394878288,-2.22694181563)); +#151250 = CARTESIAN_POINT('',(-6.576,3.039621153874,-2.235675782126)); +#151251 = CARTESIAN_POINT('',(-6.575,3.039621153874,-2.235675782126)); +#151252 = CARTESIAN_POINT('',(-6.576,3.026624179921,-2.240042765375)); +#151253 = CARTESIAN_POINT('',(-6.575,3.026624179921,-2.240042765375)); +#151254 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#151255 = CARTESIAN_POINT('',(-6.575,3.010507932217,-2.240042765375)); +#151256 = ADVANCED_FACE('',(#151257),#151268,.T.); +#151257 = FACE_BOUND('',#151258,.T.); +#151258 = EDGE_LOOP('',(#151259,#151260,#151261,#151262)); +#151259 = ORIENTED_EDGE('',*,*,#150861,.F.); +#151260 = ORIENTED_EDGE('',*,*,#151242,.F.); +#151261 = ORIENTED_EDGE('',*,*,#150668,.T.); +#151262 = ORIENTED_EDGE('',*,*,#151263,.T.); +#151263 = EDGE_CURVE('',#150660,#150862,#151264,.T.); +#151264 = LINE('',#151265,#151266); +#151265 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#151266 = VECTOR('',#151267,1.); +#151267 = DIRECTION('',(1.,-0.,-0.)); +#151268 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151269,#151270) + ,(#151271,#151272) + ,(#151273,#151274) + ,(#151275,#151276 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151269 = CARTESIAN_POINT('',(-6.576,3.010507932217,-2.240042765375)); +#151270 = CARTESIAN_POINT('',(-6.575,3.010507932217,-2.240042765375)); +#151271 = CARTESIAN_POINT('',(-6.576,2.988153137017,-2.240042765375)); +#151272 = CARTESIAN_POINT('',(-6.575,2.988153137017,-2.240042765375)); +#151273 = CARTESIAN_POINT('',(-6.576,2.969645446107,-2.232140605211)); +#151274 = CARTESIAN_POINT('',(-6.575,2.969645446107,-2.232140605211)); +#151275 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#151276 = CARTESIAN_POINT('',(-6.575,2.95519281107,-2.216336284882)); +#151277 = ADVANCED_FACE('',(#151278),#151289,.T.); +#151278 = FACE_BOUND('',#151279,.T.); +#151279 = EDGE_LOOP('',(#151280,#151281,#151282,#151283)); +#151280 = ORIENTED_EDGE('',*,*,#150870,.F.); +#151281 = ORIENTED_EDGE('',*,*,#151263,.F.); +#151282 = ORIENTED_EDGE('',*,*,#150659,.T.); +#151283 = ORIENTED_EDGE('',*,*,#151284,.T.); +#151284 = EDGE_CURVE('',#150652,#150871,#151285,.T.); +#151285 = LINE('',#151286,#151287); +#151286 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#151287 = VECTOR('',#151288,1.); +#151288 = DIRECTION('',(1.,-0.,-0.)); +#151289 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151290,#151291) + ,(#151292,#151293) + ,(#151294,#151295) + ,(#151296,#151297 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151290 = CARTESIAN_POINT('',(-6.576,2.95519281107,-2.216336284882)); +#151291 = CARTESIAN_POINT('',(-6.575,2.95519281107,-2.216336284882)); +#151292 = CARTESIAN_POINT('',(-6.576,2.940636200241,-2.200739916138)); +#151293 = CARTESIAN_POINT('',(-6.575,2.940636200241,-2.200739916138)); +#151294 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.180984515729)); +#151295 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.180984515729)); +#151296 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#151297 = CARTESIAN_POINT('',(-6.575,2.933357894827,-2.157070083653)); +#151298 = ADVANCED_FACE('',(#151299),#151310,.T.); +#151299 = FACE_BOUND('',#151300,.T.); +#151300 = EDGE_LOOP('',(#151301,#151302,#151303,#151304)); +#151301 = ORIENTED_EDGE('',*,*,#150879,.F.); +#151302 = ORIENTED_EDGE('',*,*,#151284,.F.); +#151303 = ORIENTED_EDGE('',*,*,#150651,.T.); +#151304 = ORIENTED_EDGE('',*,*,#151305,.T.); +#151305 = EDGE_CURVE('',#150644,#150880,#151306,.T.); +#151306 = LINE('',#151307,#151308); +#151307 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.129204571494)); +#151308 = VECTOR('',#151309,1.); +#151309 = DIRECTION('',(1.,-0.,-0.)); +#151310 = PLANE('',#151311); +#151311 = AXIS2_PLACEMENT_3D('',#151312,#151313,#151314); +#151312 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.157070083653)); +#151313 = DIRECTION('',(0.,1.,-1.556335539511E-14)); +#151314 = DIRECTION('',(0.,1.556335539511E-14,1.)); +#151315 = ADVANCED_FACE('',(#151316),#151322,.T.); +#151316 = FACE_BOUND('',#151317,.T.); +#151317 = EDGE_LOOP('',(#151318,#151319,#151320,#151321)); +#151318 = ORIENTED_EDGE('',*,*,#150887,.F.); +#151319 = ORIENTED_EDGE('',*,*,#151305,.F.); +#151320 = ORIENTED_EDGE('',*,*,#150643,.T.); +#151321 = ORIENTED_EDGE('',*,*,#151172,.T.); +#151322 = PLANE('',#151323); +#151323 = AXIS2_PLACEMENT_3D('',#151324,#151325,#151326); +#151324 = CARTESIAN_POINT('',(-6.576,2.933357894827,-2.129204571494)); +#151325 = DIRECTION('',(0.,-0.133354764894,-0.9910683663)); +#151326 = DIRECTION('',(0.,0.9910683663,-0.133354764894)); +#151327 = MANIFOLD_SOLID_BREP('',#151328); +#151328 = CLOSED_SHELL('',(#151329,#151375,#151406,#151443,#151480, + #151517,#151554,#151591,#151628,#151665,#151702,#151739,#151776, + #151807,#151844,#151881,#151918,#151955,#151992,#152029,#152066, + #152094,#152123)); +#151329 = ADVANCED_FACE('',(#151330),#151366,.F.); +#151330 = FACE_BOUND('',#151331,.F.); +#151331 = EDGE_LOOP('',(#151332,#151342,#151351,#151359)); +#151332 = ORIENTED_EDGE('',*,*,#151333,.F.); +#151333 = EDGE_CURVE('',#151334,#151336,#151338,.T.); +#151334 = VERTEX_POINT('',#151335); +#151335 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#151336 = VERTEX_POINT('',#151337); +#151337 = CARTESIAN_POINT('',(-6.575,2.729565343228,-2.240250716958)); +#151338 = LINE('',#151339,#151340); +#151339 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#151340 = VECTOR('',#151341,1.); +#151341 = DIRECTION('',(1.,-0.,-0.)); +#151342 = ORIENTED_EDGE('',*,*,#151343,.T.); +#151343 = EDGE_CURVE('',#151334,#151344,#151346,.T.); +#151344 = VERTEX_POINT('',#151345); +#151345 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.212177253219)); +#151346 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151347,#151348,#151349, + #151350),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151347 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#151348 = CARTESIAN_POINT('',(-6.576,2.759510371219,-2.240250716958)); +#151349 = CARTESIAN_POINT('',(-6.576,2.787375883376,-2.23089289571)); +#151350 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.212177253219)); +#151351 = ORIENTED_EDGE('',*,*,#151352,.T.); +#151352 = EDGE_CURVE('',#151344,#151353,#151355,.T.); +#151353 = VERTEX_POINT('',#151354); +#151354 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.212177253219)); +#151355 = LINE('',#151356,#151357); +#151356 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.212177253219)); +#151357 = VECTOR('',#151358,1.); +#151358 = DIRECTION('',(1.,-0.,-0.)); +#151359 = ORIENTED_EDGE('',*,*,#151360,.F.); +#151360 = EDGE_CURVE('',#151336,#151353,#151361,.T.); +#151361 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151362,#151363,#151364, + #151365),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151362 = CARTESIAN_POINT('',(-6.575,2.729565343228,-2.240250716958)); +#151363 = CARTESIAN_POINT('',(-6.575,2.759510371219,-2.240250716958)); +#151364 = CARTESIAN_POINT('',(-6.575,2.787375883376,-2.23089289571)); +#151365 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.212177253219)); +#151366 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151367,#151368) + ,(#151369,#151370) + ,(#151371,#151372) + ,(#151373,#151374 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151367 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#151368 = CARTESIAN_POINT('',(-6.575,2.729565343228,-2.240250716958)); +#151369 = CARTESIAN_POINT('',(-6.576,2.759510371219,-2.240250716958)); +#151370 = CARTESIAN_POINT('',(-6.575,2.759510371219,-2.240250716958)); +#151371 = CARTESIAN_POINT('',(-6.576,2.787375883376,-2.23089289571)); +#151372 = CARTESIAN_POINT('',(-6.575,2.787375883376,-2.23089289571)); +#151373 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.212177253219)); +#151374 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.212177253219)); +#151375 = ADVANCED_FACE('',(#151376),#151401,.F.); +#151376 = FACE_BOUND('',#151377,.T.); +#151377 = EDGE_LOOP('',(#151378,#151386,#151394,#151400)); +#151378 = ORIENTED_EDGE('',*,*,#151379,.T.); +#151379 = EDGE_CURVE('',#151353,#151380,#151382,.T.); +#151380 = VERTEX_POINT('',#151381); +#151381 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.264789003783)); +#151382 = LINE('',#151383,#151384); +#151383 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.264789003783)); +#151384 = VECTOR('',#151385,1.); +#151385 = DIRECTION('',(-0.,-8.243041988643E-15,-1.)); +#151386 = ORIENTED_EDGE('',*,*,#151387,.F.); +#151387 = EDGE_CURVE('',#151388,#151380,#151390,.T.); +#151388 = VERTEX_POINT('',#151389); +#151389 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151390 = LINE('',#151391,#151392); +#151391 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151392 = VECTOR('',#151393,1.); +#151393 = DIRECTION('',(1.,-0.,-0.)); +#151394 = ORIENTED_EDGE('',*,*,#151395,.F.); +#151395 = EDGE_CURVE('',#151344,#151388,#151396,.T.); +#151396 = LINE('',#151397,#151398); +#151397 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151398 = VECTOR('',#151399,1.); +#151399 = DIRECTION('',(-0.,-8.243041988643E-15,-1.)); +#151400 = ORIENTED_EDGE('',*,*,#151352,.T.); +#151401 = PLANE('',#151402); +#151402 = AXIS2_PLACEMENT_3D('',#151403,#151404,#151405); +#151403 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151404 = DIRECTION('',(0.,-1.,8.243041988643E-15)); +#151405 = DIRECTION('',(0.,-8.243041988643E-15,-1.)); +#151406 = ADVANCED_FACE('',(#151407),#151434,.F.); +#151407 = FACE_BOUND('',#151408,.F.); +#151408 = EDGE_LOOP('',(#151409,#151410,#151419,#151427)); +#151409 = ORIENTED_EDGE('',*,*,#151387,.F.); +#151410 = ORIENTED_EDGE('',*,*,#151411,.T.); +#151411 = EDGE_CURVE('',#151388,#151412,#151414,.T.); +#151412 = VERTEX_POINT('',#151413); +#151413 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151414 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151415,#151416,#151417, + #151418),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#151415 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151416 = CARTESIAN_POINT('',(-6.576,2.790911060292,-2.27601838928)); +#151417 = CARTESIAN_POINT('',(-6.576,2.7647091608,-2.28184103361)); +#151418 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151419 = ORIENTED_EDGE('',*,*,#151420,.T.); +#151420 = EDGE_CURVE('',#151412,#151421,#151423,.T.); +#151421 = VERTEX_POINT('',#151422); +#151422 = CARTESIAN_POINT('',(-6.575,2.734556181227,-2.28184103361)); +#151423 = LINE('',#151424,#151425); +#151424 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151425 = VECTOR('',#151426,1.); +#151426 = DIRECTION('',(1.,-0.,-0.)); +#151427 = ORIENTED_EDGE('',*,*,#151428,.F.); +#151428 = EDGE_CURVE('',#151380,#151421,#151429,.T.); +#151429 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151430,#151431,#151432, + #151433),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#151430 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.264789003783)); +#151431 = CARTESIAN_POINT('',(-6.575,2.790911060292,-2.27601838928)); +#151432 = CARTESIAN_POINT('',(-6.575,2.7647091608,-2.28184103361)); +#151433 = CARTESIAN_POINT('',(-6.575,2.734556181227,-2.28184103361)); +#151434 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151435,#151436) + ,(#151437,#151438) + ,(#151439,#151440) + ,(#151441,#151442 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151435 = CARTESIAN_POINT('',(-6.576,2.813369831284,-2.264789003783)); +#151436 = CARTESIAN_POINT('',(-6.575,2.813369831284,-2.264789003783)); +#151437 = CARTESIAN_POINT('',(-6.576,2.790911060292,-2.27601838928)); +#151438 = CARTESIAN_POINT('',(-6.575,2.790911060292,-2.27601838928)); +#151439 = CARTESIAN_POINT('',(-6.576,2.7647091608,-2.28184103361)); +#151440 = CARTESIAN_POINT('',(-6.575,2.7647091608,-2.28184103361)); +#151441 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151442 = CARTESIAN_POINT('',(-6.575,2.734556181227,-2.28184103361)); +#151443 = ADVANCED_FACE('',(#151444),#151471,.F.); +#151444 = FACE_BOUND('',#151445,.F.); +#151445 = EDGE_LOOP('',(#151446,#151447,#151456,#151464)); +#151446 = ORIENTED_EDGE('',*,*,#151420,.F.); +#151447 = ORIENTED_EDGE('',*,*,#151448,.T.); +#151448 = EDGE_CURVE('',#151412,#151449,#151451,.T.); +#151449 = VERTEX_POINT('',#151450); +#151450 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151451 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151452,#151453,#151454, + #151455),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#151452 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151453 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.28184103361)); +#151454 = CARTESIAN_POINT('',(-6.576,2.67165082729,-2.27414682503)); +#151455 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151456 = ORIENTED_EDGE('',*,*,#151457,.T.); +#151457 = EDGE_CURVE('',#151449,#151458,#151460,.T.); +#151458 = VERTEX_POINT('',#151459); +#151459 = CARTESIAN_POINT('',(-6.575,2.649919886839,-2.258758407869)); +#151460 = LINE('',#151461,#151462); +#151461 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151462 = VECTOR('',#151463,1.); +#151463 = DIRECTION('',(1.,-0.,-0.)); +#151464 = ORIENTED_EDGE('',*,*,#151465,.F.); +#151465 = EDGE_CURVE('',#151421,#151458,#151466,.T.); +#151466 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151467,#151468,#151469, + #151470),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#151467 = CARTESIAN_POINT('',(-6.575,2.734556181227,-2.28184103361)); +#151468 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.28184103361)); +#151469 = CARTESIAN_POINT('',(-6.575,2.67165082729,-2.27414682503)); +#151470 = CARTESIAN_POINT('',(-6.575,2.649919886839,-2.258758407869)); +#151471 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151472,#151473) + ,(#151474,#151475) + ,(#151476,#151477) + ,(#151478,#151479 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151472 = CARTESIAN_POINT('',(-6.576,2.734556181227,-2.28184103361)); +#151473 = CARTESIAN_POINT('',(-6.575,2.734556181227,-2.28184103361)); +#151474 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.28184103361)); +#151475 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.28184103361)); +#151476 = CARTESIAN_POINT('',(-6.576,2.67165082729,-2.27414682503)); +#151477 = CARTESIAN_POINT('',(-6.575,2.67165082729,-2.27414682503)); +#151478 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151479 = CARTESIAN_POINT('',(-6.575,2.649919886839,-2.258758407869)); +#151480 = ADVANCED_FACE('',(#151481),#151508,.F.); +#151481 = FACE_BOUND('',#151482,.F.); +#151482 = EDGE_LOOP('',(#151483,#151484,#151493,#151501)); +#151483 = ORIENTED_EDGE('',*,*,#151457,.F.); +#151484 = ORIENTED_EDGE('',*,*,#151485,.T.); +#151485 = EDGE_CURVE('',#151449,#151486,#151488,.T.); +#151486 = VERTEX_POINT('',#151487); +#151487 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151488 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151489,#151490,#151491, + #151492),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#151489 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151490 = CARTESIAN_POINT('',(-6.576,2.628084970596,-2.243577942289)); +#151491 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.222574832381)); +#151492 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151493 = ORIENTED_EDGE('',*,*,#151494,.T.); +#151494 = EDGE_CURVE('',#151486,#151495,#151497,.T.); +#151495 = VERTEX_POINT('',#151496); +#151496 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.195957029723)); +#151497 = LINE('',#151498,#151499); +#151498 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151499 = VECTOR('',#151500,1.); +#151500 = DIRECTION('',(1.,-0.,-0.)); +#151501 = ORIENTED_EDGE('',*,*,#151502,.F.); +#151502 = EDGE_CURVE('',#151458,#151495,#151503,.T.); +#151503 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151504,#151505,#151506, + #151507),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#151504 = CARTESIAN_POINT('',(-6.575,2.649919886839,-2.258758407869)); +#151505 = CARTESIAN_POINT('',(-6.575,2.628084970596,-2.243577942289)); +#151506 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.222574832381)); +#151507 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.195957029723)); +#151508 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151509,#151510) + ,(#151511,#151512) + ,(#151513,#151514) + ,(#151515,#151516 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151509 = CARTESIAN_POINT('',(-6.576,2.649919886839,-2.258758407869)); +#151510 = CARTESIAN_POINT('',(-6.575,2.649919886839,-2.258758407869)); +#151511 = CARTESIAN_POINT('',(-6.576,2.628084970596,-2.243577942289)); +#151512 = CARTESIAN_POINT('',(-6.575,2.628084970596,-2.243577942289)); +#151513 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.222574832381)); +#151514 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.222574832381)); +#151515 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151516 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.195957029723)); +#151517 = ADVANCED_FACE('',(#151518),#151545,.F.); +#151518 = FACE_BOUND('',#151519,.F.); +#151519 = EDGE_LOOP('',(#151520,#151521,#151530,#151538)); +#151520 = ORIENTED_EDGE('',*,*,#151494,.F.); +#151521 = ORIENTED_EDGE('',*,*,#151522,.T.); +#151522 = EDGE_CURVE('',#151486,#151523,#151525,.T.); +#151523 = VERTEX_POINT('',#151524); +#151524 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151525 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151526,#151527,#151528, + #151529),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#151526 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151527 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.176825484063)); +#151528 = CARTESIAN_POINT('',(-6.576,2.622886181015,-2.16081321215)); +#151529 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151530 = ORIENTED_EDGE('',*,*,#151531,.T.); +#151531 = EDGE_CURVE('',#151523,#151532,#151534,.T.); +#151532 = VERTEX_POINT('',#151533); +#151533 = CARTESIAN_POINT('',(-6.575,2.634219542303,-2.147920213989)); +#151534 = LINE('',#151535,#151536); +#151535 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151536 = VECTOR('',#151537,1.); +#151537 = DIRECTION('',(1.,-0.,-0.)); +#151538 = ORIENTED_EDGE('',*,*,#151539,.F.); +#151539 = EDGE_CURVE('',#151495,#151532,#151540,.T.); +#151540 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151541,#151542,#151543, + #151544),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#151541 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.195957029723)); +#151542 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.176825484063)); +#151543 = CARTESIAN_POINT('',(-6.575,2.622886181015,-2.16081321215)); +#151544 = CARTESIAN_POINT('',(-6.575,2.634219542303,-2.147920213989)); +#151545 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151546,#151547) + ,(#151548,#151549) + ,(#151550,#151551) + ,(#151552,#151553 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151546 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.195957029723)); +#151547 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.195957029723)); +#151548 = CARTESIAN_POINT('',(-6.576,2.617167512475,-2.176825484063)); +#151549 = CARTESIAN_POINT('',(-6.575,2.617167512475,-2.176825484063)); +#151550 = CARTESIAN_POINT('',(-6.576,2.622886181015,-2.16081321215)); +#151551 = CARTESIAN_POINT('',(-6.575,2.622886181015,-2.16081321215)); +#151552 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151553 = CARTESIAN_POINT('',(-6.575,2.634219542303,-2.147920213989)); +#151554 = ADVANCED_FACE('',(#151555),#151582,.F.); +#151555 = FACE_BOUND('',#151556,.F.); +#151556 = EDGE_LOOP('',(#151557,#151558,#151567,#151575)); +#151557 = ORIENTED_EDGE('',*,*,#151531,.F.); +#151558 = ORIENTED_EDGE('',*,*,#151559,.T.); +#151559 = EDGE_CURVE('',#151523,#151560,#151562,.T.); +#151560 = VERTEX_POINT('',#151561); +#151561 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151562 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151563,#151564,#151565, + #151566),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#151563 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151564 = CARTESIAN_POINT('',(-6.576,2.645656879382,-2.135027215827)); +#151565 = CARTESIAN_POINT('',(-6.576,2.667491795624,-2.122342169249)); +#151566 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151567 = ORIENTED_EDGE('',*,*,#151568,.T.); +#151568 = EDGE_CURVE('',#151560,#151569,#151571,.T.); +#151569 = VERTEX_POINT('',#151570); +#151570 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.110280977419)); +#151571 = LINE('',#151572,#151573); +#151572 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151573 = VECTOR('',#151574,1.); +#151574 = DIRECTION('',(1.,-0.,-0.)); +#151575 = ORIENTED_EDGE('',*,*,#151576,.F.); +#151576 = EDGE_CURVE('',#151532,#151569,#151577,.T.); +#151577 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151578,#151579,#151580, + #151581),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#151578 = CARTESIAN_POINT('',(-6.575,2.634219542303,-2.147920213989)); +#151579 = CARTESIAN_POINT('',(-6.575,2.645656879382,-2.135027215827)); +#151580 = CARTESIAN_POINT('',(-6.575,2.667491795624,-2.122342169249)); +#151581 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.110280977419)); +#151582 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151583,#151584) + ,(#151585,#151586) + ,(#151587,#151588) + ,(#151589,#151590 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151583 = CARTESIAN_POINT('',(-6.576,2.634219542303,-2.147920213989)); +#151584 = CARTESIAN_POINT('',(-6.575,2.634219542303,-2.147920213989)); +#151585 = CARTESIAN_POINT('',(-6.576,2.645656879382,-2.135027215827)); +#151586 = CARTESIAN_POINT('',(-6.575,2.645656879382,-2.135027215827)); +#151587 = CARTESIAN_POINT('',(-6.576,2.667491795624,-2.122342169249)); +#151588 = CARTESIAN_POINT('',(-6.575,2.667491795624,-2.122342169249)); +#151589 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151590 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.110280977419)); +#151591 = ADVANCED_FACE('',(#151592),#151619,.F.); +#151592 = FACE_BOUND('',#151593,.F.); +#151593 = EDGE_LOOP('',(#151594,#151595,#151604,#151612)); +#151594 = ORIENTED_EDGE('',*,*,#151568,.F.); +#151595 = ORIENTED_EDGE('',*,*,#151596,.T.); +#151596 = EDGE_CURVE('',#151560,#151597,#151599,.T.); +#151597 = VERTEX_POINT('',#151598); +#151598 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151599 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151600,#151601,#151602, + #151603),.UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.), + .PIECEWISE_BEZIER_KNOTS.); +#151600 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151601 = CARTESIAN_POINT('',(-6.576,2.725510287355,-2.100299301423)); +#151602 = CARTESIAN_POINT('',(-6.576,2.741938462432,-2.091981238091)); +#151603 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151604 = ORIENTED_EDGE('',*,*,#151605,.T.); +#151605 = EDGE_CURVE('',#151597,#151606,#151608,.T.); +#151606 = VERTEX_POINT('',#151607); +#151607 = CARTESIAN_POINT('',(-6.575,2.749424719431,-2.085326787426)); +#151608 = LINE('',#151609,#151610); +#151609 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151610 = VECTOR('',#151611,1.); +#151611 = DIRECTION('',(1.,-0.,-0.)); +#151612 = ORIENTED_EDGE('',*,*,#151613,.F.); +#151613 = EDGE_CURVE('',#151569,#151606,#151614,.T.); +#151614 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151615,#151616,#151617, + #151618),.UNSPECIFIED.,.F.,.F.,(4,4),(14.,15.), + .PIECEWISE_BEZIER_KNOTS.); +#151615 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.110280977419)); +#151616 = CARTESIAN_POINT('',(-6.575,2.725510287355,-2.100299301423)); +#151617 = CARTESIAN_POINT('',(-6.575,2.741938462432,-2.091981238091)); +#151618 = CARTESIAN_POINT('',(-6.575,2.749424719431,-2.085326787426)); +#151619 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151620,#151621) + ,(#151622,#151623) + ,(#151624,#151625) + ,(#151626,#151627 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(14.,15.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151620 = CARTESIAN_POINT('',(-6.576,2.699932242614,-2.110280977419)); +#151621 = CARTESIAN_POINT('',(-6.575,2.699932242614,-2.110280977419)); +#151622 = CARTESIAN_POINT('',(-6.576,2.725510287355,-2.100299301423)); +#151623 = CARTESIAN_POINT('',(-6.575,2.725510287355,-2.100299301423)); +#151624 = CARTESIAN_POINT('',(-6.576,2.741938462432,-2.091981238091)); +#151625 = CARTESIAN_POINT('',(-6.575,2.741938462432,-2.091981238091)); +#151626 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151627 = CARTESIAN_POINT('',(-6.575,2.749424719431,-2.085326787426)); +#151628 = ADVANCED_FACE('',(#151629),#151656,.F.); +#151629 = FACE_BOUND('',#151630,.F.); +#151630 = EDGE_LOOP('',(#151631,#151632,#151641,#151649)); +#151631 = ORIENTED_EDGE('',*,*,#151605,.F.); +#151632 = ORIENTED_EDGE('',*,*,#151633,.T.); +#151633 = EDGE_CURVE('',#151597,#151634,#151636,.T.); +#151634 = VERTEX_POINT('',#151635); +#151635 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151636 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151637,#151638,#151639, + #151640),.UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.), + .PIECEWISE_BEZIER_KNOTS.); +#151637 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151638 = CARTESIAN_POINT('',(-6.576,2.756807000637,-2.078880288346)); +#151639 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.069938370265)); +#151640 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151641 = ORIENTED_EDGE('',*,*,#151642,.T.); +#151642 = EDGE_CURVE('',#151634,#151643,#151645,.T.); +#151643 = VERTEX_POINT('',#151644); +#151644 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.058293081602)); +#151645 = LINE('',#151646,#151647); +#151646 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151647 = VECTOR('',#151648,1.); +#151648 = DIRECTION('',(1.,-0.,-0.)); +#151649 = ORIENTED_EDGE('',*,*,#151650,.F.); +#151650 = EDGE_CURVE('',#151606,#151643,#151651,.T.); +#151651 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151652,#151653,#151654, + #151655),.UNSPECIFIED.,.F.,.F.,(4,4),(13.,14.), + .PIECEWISE_BEZIER_KNOTS.); +#151652 = CARTESIAN_POINT('',(-6.575,2.749424719431,-2.085326787426)); +#151653 = CARTESIAN_POINT('',(-6.575,2.756807000637,-2.078880288346)); +#151654 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.069938370265)); +#151655 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.058293081602)); +#151656 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151657,#151658) + ,(#151659,#151660) + ,(#151661,#151662) + ,(#151663,#151664 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(13.,14.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151657 = CARTESIAN_POINT('',(-6.576,2.749424719431,-2.085326787426)); +#151658 = CARTESIAN_POINT('',(-6.575,2.749424719431,-2.085326787426)); +#151659 = CARTESIAN_POINT('',(-6.576,2.756807000637,-2.078880288346)); +#151660 = CARTESIAN_POINT('',(-6.575,2.756807000637,-2.078880288346)); +#151661 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.069938370265)); +#151662 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.069938370265)); +#151663 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151664 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.058293081602)); +#151665 = ADVANCED_FACE('',(#151666),#151693,.F.); +#151666 = FACE_BOUND('',#151667,.F.); +#151667 = EDGE_LOOP('',(#151668,#151669,#151678,#151686)); +#151668 = ORIENTED_EDGE('',*,*,#151642,.F.); +#151669 = ORIENTED_EDGE('',*,*,#151670,.T.); +#151670 = EDGE_CURVE('',#151634,#151671,#151673,.T.); +#151671 = VERTEX_POINT('',#151672); +#151672 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151673 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151674,#151675,#151676, + #151677),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#151674 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151675 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.046647792941)); +#151676 = CARTESIAN_POINT('',(-6.576,2.755351339553,-2.037082020111)); +#151677 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151678 = ORIENTED_EDGE('',*,*,#151679,.T.); +#151679 = EDGE_CURVE('',#151671,#151680,#151682,.T.); +#151680 = VERTEX_POINT('',#151681); +#151681 = CARTESIAN_POINT('',(-6.575,2.745057736182,-2.03001166628)); +#151682 = LINE('',#151683,#151684); +#151683 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151684 = VECTOR('',#151685,1.); +#151685 = DIRECTION('',(1.,-0.,-0.)); +#151686 = ORIENTED_EDGE('',*,*,#151687,.F.); +#151687 = EDGE_CURVE('',#151643,#151680,#151688,.T.); +#151688 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151689,#151690,#151691, + #151692),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#151689 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.058293081602)); +#151690 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.046647792941)); +#151691 = CARTESIAN_POINT('',(-6.575,2.755351339553,-2.037082020111)); +#151692 = CARTESIAN_POINT('',(-6.575,2.745057736182,-2.03001166628)); +#151693 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151694,#151695) + ,(#151696,#151697) + ,(#151698,#151699) + ,(#151700,#151701 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151694 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.058293081602)); +#151695 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.058293081602)); +#151696 = CARTESIAN_POINT('',(-6.576,2.760550129135,-2.046647792941)); +#151697 = CARTESIAN_POINT('',(-6.575,2.760550129135,-2.046647792941)); +#151698 = CARTESIAN_POINT('',(-6.576,2.755351339553,-2.037082020111)); +#151699 = CARTESIAN_POINT('',(-6.575,2.755351339553,-2.037082020111)); +#151700 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151701 = CARTESIAN_POINT('',(-6.575,2.745057736182,-2.03001166628)); +#151702 = ADVANCED_FACE('',(#151703),#151730,.F.); +#151703 = FACE_BOUND('',#151704,.F.); +#151704 = EDGE_LOOP('',(#151705,#151706,#151715,#151723)); +#151705 = ORIENTED_EDGE('',*,*,#151679,.F.); +#151706 = ORIENTED_EDGE('',*,*,#151707,.T.); +#151707 = EDGE_CURVE('',#151671,#151708,#151710,.T.); +#151708 = VERTEX_POINT('',#151709); +#151709 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151710 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151711,#151712,#151713, + #151714),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#151711 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151712 = CARTESIAN_POINT('',(-6.576,2.734764132811,-2.022733360865)); +#151713 = CARTESIAN_POINT('',(-6.576,2.721351255689,-2.019198183948)); +#151714 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151715 = ORIENTED_EDGE('',*,*,#151716,.T.); +#151716 = EDGE_CURVE('',#151708,#151717,#151719,.T.); +#151717 = VERTEX_POINT('',#151718); +#151718 = CARTESIAN_POINT('',(-6.575,2.704923080612,-2.019198183948)); +#151719 = LINE('',#151720,#151721); +#151720 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151721 = VECTOR('',#151722,1.); +#151722 = DIRECTION('',(1.,-0.,-0.)); +#151723 = ORIENTED_EDGE('',*,*,#151724,.F.); +#151724 = EDGE_CURVE('',#151680,#151717,#151725,.T.); +#151725 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151726,#151727,#151728, + #151729),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#151726 = CARTESIAN_POINT('',(-6.575,2.745057736182,-2.03001166628)); +#151727 = CARTESIAN_POINT('',(-6.575,2.734764132811,-2.022733360865)); +#151728 = CARTESIAN_POINT('',(-6.575,2.721351255689,-2.019198183948)); +#151729 = CARTESIAN_POINT('',(-6.575,2.704923080612,-2.019198183948)); +#151730 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151731,#151732) + ,(#151733,#151734) + ,(#151735,#151736) + ,(#151737,#151738 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(11.,12.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151731 = CARTESIAN_POINT('',(-6.576,2.745057736182,-2.03001166628)); +#151732 = CARTESIAN_POINT('',(-6.575,2.745057736182,-2.03001166628)); +#151733 = CARTESIAN_POINT('',(-6.576,2.734764132811,-2.022733360865)); +#151734 = CARTESIAN_POINT('',(-6.575,2.734764132811,-2.022733360865)); +#151735 = CARTESIAN_POINT('',(-6.576,2.721351255689,-2.019198183948)); +#151736 = CARTESIAN_POINT('',(-6.575,2.721351255689,-2.019198183948)); +#151737 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151738 = CARTESIAN_POINT('',(-6.575,2.704923080612,-2.019198183948)); +#151739 = ADVANCED_FACE('',(#151740),#151767,.F.); +#151740 = FACE_BOUND('',#151741,.F.); +#151741 = EDGE_LOOP('',(#151742,#151743,#151752,#151760)); +#151742 = ORIENTED_EDGE('',*,*,#151716,.F.); +#151743 = ORIENTED_EDGE('',*,*,#151744,.T.); +#151744 = EDGE_CURVE('',#151708,#151745,#151747,.T.); +#151745 = VERTEX_POINT('',#151746); +#151746 = CARTESIAN_POINT('',(-6.576,2.631100268553,-2.040201293859)); +#151747 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151748,#151749,#151750, + #151751),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#151748 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151749 = CARTESIAN_POINT('',(-6.576,2.677369495829,-2.019198183948)); +#151750 = CARTESIAN_POINT('',(-6.576,2.652831209004,-2.02626853778)); +#151751 = CARTESIAN_POINT('',(-6.576,2.631100268553,-2.040201293859)); +#151752 = ORIENTED_EDGE('',*,*,#151753,.T.); +#151753 = EDGE_CURVE('',#151745,#151754,#151756,.T.); +#151754 = VERTEX_POINT('',#151755); +#151755 = CARTESIAN_POINT('',(-6.575,2.631100268553,-2.040201293859)); +#151756 = LINE('',#151757,#151758); +#151757 = CARTESIAN_POINT('',(-6.576,2.631100268553,-2.040201293859)); +#151758 = VECTOR('',#151759,1.); +#151759 = DIRECTION('',(1.,-0.,-0.)); +#151760 = ORIENTED_EDGE('',*,*,#151761,.F.); +#151761 = EDGE_CURVE('',#151717,#151754,#151762,.T.); +#151762 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151763,#151764,#151765, + #151766),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#151763 = CARTESIAN_POINT('',(-6.575,2.704923080612,-2.019198183948)); +#151764 = CARTESIAN_POINT('',(-6.575,2.677369495829,-2.019198183948)); +#151765 = CARTESIAN_POINT('',(-6.575,2.652831209004,-2.02626853778)); +#151766 = CARTESIAN_POINT('',(-6.575,2.631100268553,-2.040201293859)); +#151767 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151768,#151769) + ,(#151770,#151771) + ,(#151772,#151773) + ,(#151774,#151775 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151768 = CARTESIAN_POINT('',(-6.576,2.704923080612,-2.019198183948)); +#151769 = CARTESIAN_POINT('',(-6.575,2.704923080612,-2.019198183948)); +#151770 = CARTESIAN_POINT('',(-6.576,2.677369495829,-2.019198183948)); +#151771 = CARTESIAN_POINT('',(-6.575,2.677369495829,-2.019198183948)); +#151772 = CARTESIAN_POINT('',(-6.576,2.652831209004,-2.02626853778)); +#151773 = CARTESIAN_POINT('',(-6.575,2.652831209004,-2.02626853778)); +#151774 = CARTESIAN_POINT('',(-6.576,2.631100268553,-2.040201293859)); +#151775 = CARTESIAN_POINT('',(-6.575,2.631100268553,-2.040201293859)); +#151776 = ADVANCED_FACE('',(#151777),#151802,.F.); +#151777 = FACE_BOUND('',#151778,.T.); +#151778 = EDGE_LOOP('',(#151779,#151787,#151795,#151801)); +#151779 = ORIENTED_EDGE('',*,*,#151780,.T.); +#151780 = EDGE_CURVE('',#151754,#151781,#151783,.T.); +#151781 = VERTEX_POINT('',#151782); +#151782 = CARTESIAN_POINT('',(-6.575,2.631100268553,-1.990708817043)); +#151783 = LINE('',#151784,#151785); +#151784 = CARTESIAN_POINT('',(-6.575,2.631100268553,-1.990708817043)); +#151785 = VECTOR('',#151786,1.); +#151786 = DIRECTION('',(-0.,8.762561441589E-15,1.)); +#151787 = ORIENTED_EDGE('',*,*,#151788,.F.); +#151788 = EDGE_CURVE('',#151789,#151781,#151791,.T.); +#151789 = VERTEX_POINT('',#151790); +#151790 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151791 = LINE('',#151792,#151793); +#151792 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151793 = VECTOR('',#151794,1.); +#151794 = DIRECTION('',(1.,-0.,-0.)); +#151795 = ORIENTED_EDGE('',*,*,#151796,.F.); +#151796 = EDGE_CURVE('',#151745,#151789,#151797,.T.); +#151797 = LINE('',#151798,#151799); +#151798 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151799 = VECTOR('',#151800,1.); +#151800 = DIRECTION('',(-0.,8.762561441589E-15,1.)); +#151801 = ORIENTED_EDGE('',*,*,#151753,.T.); +#151802 = PLANE('',#151803); +#151803 = AXIS2_PLACEMENT_3D('',#151804,#151805,#151806); +#151804 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151805 = DIRECTION('',(0.,1.,-8.762561441589E-15)); +#151806 = DIRECTION('',(0.,8.762561441589E-15,1.)); +#151807 = ADVANCED_FACE('',(#151808),#151835,.F.); +#151808 = FACE_BOUND('',#151809,.F.); +#151809 = EDGE_LOOP('',(#151810,#151811,#151820,#151828)); +#151810 = ORIENTED_EDGE('',*,*,#151788,.F.); +#151811 = ORIENTED_EDGE('',*,*,#151812,.T.); +#151812 = EDGE_CURVE('',#151789,#151813,#151815,.T.); +#151813 = VERTEX_POINT('',#151814); +#151814 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151815 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151816,#151817,#151818, + #151819),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#151816 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151817 = CARTESIAN_POINT('',(-6.576,2.652311330047,-1.981974850545)); +#151818 = CARTESIAN_POINT('',(-6.576,2.675186004206,-1.977815818879)); +#151819 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151820 = ORIENTED_EDGE('',*,*,#151821,.T.); +#151821 = EDGE_CURVE('',#151813,#151822,#151824,.T.); +#151822 = VERTEX_POINT('',#151823); +#151823 = CARTESIAN_POINT('',(-6.575,2.699932242614,-1.977815818879)); +#151824 = LINE('',#151825,#151826); +#151825 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151826 = VECTOR('',#151827,1.); +#151827 = DIRECTION('',(1.,-0.,-0.)); +#151828 = ORIENTED_EDGE('',*,*,#151829,.F.); +#151829 = EDGE_CURVE('',#151781,#151822,#151830,.T.); +#151830 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151831,#151832,#151833, + #151834),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#151831 = CARTESIAN_POINT('',(-6.575,2.631100268553,-1.990708817043)); +#151832 = CARTESIAN_POINT('',(-6.575,2.652311330047,-1.981974850545)); +#151833 = CARTESIAN_POINT('',(-6.575,2.675186004206,-1.977815818879)); +#151834 = CARTESIAN_POINT('',(-6.575,2.699932242614,-1.977815818879)); +#151835 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151836,#151837) + ,(#151838,#151839) + ,(#151840,#151841) + ,(#151842,#151843 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151836 = CARTESIAN_POINT('',(-6.576,2.631100268553,-1.990708817043)); +#151837 = CARTESIAN_POINT('',(-6.575,2.631100268553,-1.990708817043)); +#151838 = CARTESIAN_POINT('',(-6.576,2.652311330047,-1.981974850545)); +#151839 = CARTESIAN_POINT('',(-6.575,2.652311330047,-1.981974850545)); +#151840 = CARTESIAN_POINT('',(-6.576,2.675186004206,-1.977815818879)); +#151841 = CARTESIAN_POINT('',(-6.575,2.675186004206,-1.977815818879)); +#151842 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151843 = CARTESIAN_POINT('',(-6.575,2.699932242614,-1.977815818879)); +#151844 = ADVANCED_FACE('',(#151845),#151872,.F.); +#151845 = FACE_BOUND('',#151846,.F.); +#151846 = EDGE_LOOP('',(#151847,#151848,#151857,#151865)); +#151847 = ORIENTED_EDGE('',*,*,#151821,.F.); +#151848 = ORIENTED_EDGE('',*,*,#151849,.T.); +#151849 = EDGE_CURVE('',#151813,#151850,#151852,.T.); +#151850 = VERTEX_POINT('',#151851); +#151851 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151852 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151853,#151854,#151855, + #151856),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#151853 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151854 = CARTESIAN_POINT('',(-6.576,2.731748834853,-1.977815818879)); +#151855 = CARTESIAN_POINT('',(-6.576,2.758574589094,-1.985510027459)); +#151856 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151857 = ORIENTED_EDGE('',*,*,#151858,.T.); +#151858 = EDGE_CURVE('',#151850,#151859,#151861,.T.); +#151859 = VERTEX_POINT('',#151860); +#151860 = CARTESIAN_POINT('',(-6.575,2.780409505337,-2.000898444623)); +#151861 = LINE('',#151862,#151863); +#151862 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151863 = VECTOR('',#151864,1.); +#151864 = DIRECTION('',(1.,-0.,-0.)); +#151865 = ORIENTED_EDGE('',*,*,#151866,.F.); +#151866 = EDGE_CURVE('',#151822,#151859,#151867,.T.); +#151867 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151868,#151869,#151870, + #151871),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#151868 = CARTESIAN_POINT('',(-6.575,2.699932242614,-1.977815818879)); +#151869 = CARTESIAN_POINT('',(-6.575,2.731748834853,-1.977815818879)); +#151870 = CARTESIAN_POINT('',(-6.575,2.758574589094,-1.985510027459)); +#151871 = CARTESIAN_POINT('',(-6.575,2.780409505337,-2.000898444623)); +#151872 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151873,#151874) + ,(#151875,#151876) + ,(#151877,#151878) + ,(#151879,#151880 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151873 = CARTESIAN_POINT('',(-6.576,2.699932242614,-1.977815818879)); +#151874 = CARTESIAN_POINT('',(-6.575,2.699932242614,-1.977815818879)); +#151875 = CARTESIAN_POINT('',(-6.576,2.731748834853,-1.977815818879)); +#151876 = CARTESIAN_POINT('',(-6.575,2.731748834853,-1.977815818879)); +#151877 = CARTESIAN_POINT('',(-6.576,2.758574589094,-1.985510027459)); +#151878 = CARTESIAN_POINT('',(-6.575,2.758574589094,-1.985510027459)); +#151879 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151880 = CARTESIAN_POINT('',(-6.575,2.780409505337,-2.000898444623)); +#151881 = ADVANCED_FACE('',(#151882),#151909,.F.); +#151882 = FACE_BOUND('',#151883,.F.); +#151883 = EDGE_LOOP('',(#151884,#151885,#151894,#151902)); +#151884 = ORIENTED_EDGE('',*,*,#151858,.F.); +#151885 = ORIENTED_EDGE('',*,*,#151886,.T.); +#151886 = EDGE_CURVE('',#151850,#151887,#151889,.T.); +#151887 = VERTEX_POINT('',#151888); +#151888 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151889 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151890,#151891,#151892, + #151893),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#151890 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151891 = CARTESIAN_POINT('',(-6.576,2.802140445788,-2.016494813366)); +#151892 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.037082020111)); +#151893 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151894 = ORIENTED_EDGE('',*,*,#151895,.T.); +#151895 = EDGE_CURVE('',#151887,#151896,#151898,.T.); +#151896 = VERTEX_POINT('',#151897); +#151897 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.062868016434)); +#151898 = LINE('',#151899,#151900); +#151899 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151900 = VECTOR('',#151901,1.); +#151901 = DIRECTION('',(1.,-0.,-0.)); +#151902 = ORIENTED_EDGE('',*,*,#151903,.F.); +#151903 = EDGE_CURVE('',#151859,#151896,#151904,.T.); +#151904 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151905,#151906,#151907, + #151908),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#151905 = CARTESIAN_POINT('',(-6.575,2.780409505337,-2.000898444623)); +#151906 = CARTESIAN_POINT('',(-6.575,2.802140445788,-2.016494813366)); +#151907 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.037082020111)); +#151908 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.062868016434)); +#151909 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151910,#151911) + ,(#151912,#151913) + ,(#151914,#151915) + ,(#151916,#151917 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151910 = CARTESIAN_POINT('',(-6.576,2.780409505337,-2.000898444623)); +#151911 = CARTESIAN_POINT('',(-6.575,2.780409505337,-2.000898444623)); +#151912 = CARTESIAN_POINT('',(-6.576,2.802140445788,-2.016494813366)); +#151913 = CARTESIAN_POINT('',(-6.575,2.802140445788,-2.016494813366)); +#151914 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.037082020111)); +#151915 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.037082020111)); +#151916 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151917 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.062868016434)); +#151918 = ADVANCED_FACE('',(#151919),#151946,.F.); +#151919 = FACE_BOUND('',#151920,.F.); +#151920 = EDGE_LOOP('',(#151921,#151922,#151931,#151939)); +#151921 = ORIENTED_EDGE('',*,*,#151895,.F.); +#151922 = ORIENTED_EDGE('',*,*,#151923,.T.); +#151923 = EDGE_CURVE('',#151887,#151924,#151926,.T.); +#151924 = VERTEX_POINT('',#151925); +#151925 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151926 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151927,#151928,#151929, + #151930),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#151927 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151928 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.080751852596)); +#151929 = CARTESIAN_POINT('',(-6.576,2.808275017494,-2.096140269757)); +#151930 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151931 = ORIENTED_EDGE('',*,*,#151932,.T.); +#151932 = EDGE_CURVE('',#151924,#151933,#151935,.T.); +#151933 = VERTEX_POINT('',#151934); +#151934 = CARTESIAN_POINT('',(-6.575,2.798605268872,-2.108825316335)); +#151935 = LINE('',#151936,#151937); +#151936 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151937 = VECTOR('',#151938,1.); +#151938 = DIRECTION('',(1.,-0.,-0.)); +#151939 = ORIENTED_EDGE('',*,*,#151940,.F.); +#151940 = EDGE_CURVE('',#151896,#151933,#151941,.T.); +#151941 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151942,#151943,#151944, + #151945),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#151942 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.062868016434)); +#151943 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.080751852596)); +#151944 = CARTESIAN_POINT('',(-6.575,2.808275017494,-2.096140269757)); +#151945 = CARTESIAN_POINT('',(-6.575,2.798605268872,-2.108825316335)); +#151946 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151947,#151948) + ,(#151949,#151950) + ,(#151951,#151952) + ,(#151953,#151954 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151947 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.062868016434)); +#151948 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.062868016434)); +#151949 = CARTESIAN_POINT('',(-6.576,2.813057903909,-2.080751852596)); +#151950 = CARTESIAN_POINT('',(-6.575,2.813057903909,-2.080751852596)); +#151951 = CARTESIAN_POINT('',(-6.576,2.808275017494,-2.096140269757)); +#151952 = CARTESIAN_POINT('',(-6.575,2.808275017494,-2.096140269757)); +#151953 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151954 = CARTESIAN_POINT('',(-6.575,2.798605268872,-2.108825316335)); +#151955 = ADVANCED_FACE('',(#151956),#151983,.F.); +#151956 = FACE_BOUND('',#151957,.F.); +#151957 = EDGE_LOOP('',(#151958,#151959,#151968,#151976)); +#151958 = ORIENTED_EDGE('',*,*,#151932,.F.); +#151959 = ORIENTED_EDGE('',*,*,#151960,.T.); +#151960 = EDGE_CURVE('',#151924,#151961,#151963,.T.); +#151961 = VERTEX_POINT('',#151962); +#151962 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#151963 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151964,#151965,#151966, + #151967),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#151964 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151965 = CARTESIAN_POINT('',(-6.576,2.789039496042,-2.121510362914)); +#151966 = CARTESIAN_POINT('',(-6.576,2.768036386133,-2.134403361078)); +#151967 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#151968 = ORIENTED_EDGE('',*,*,#151969,.T.); +#151969 = EDGE_CURVE('',#151961,#151970,#151972,.T.); +#151970 = VERTEX_POINT('',#151971); +#151971 = CARTESIAN_POINT('',(-6.575,2.735907866518,-2.14729635924)); +#151972 = LINE('',#151973,#151974); +#151973 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#151974 = VECTOR('',#151975,1.); +#151975 = DIRECTION('',(1.,-0.,-0.)); +#151976 = ORIENTED_EDGE('',*,*,#151977,.F.); +#151977 = EDGE_CURVE('',#151933,#151970,#151978,.T.); +#151978 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#151979,#151980,#151981, + #151982),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#151979 = CARTESIAN_POINT('',(-6.575,2.798605268872,-2.108825316335)); +#151980 = CARTESIAN_POINT('',(-6.575,2.789039496042,-2.121510362914)); +#151981 = CARTESIAN_POINT('',(-6.575,2.768036386133,-2.134403361078)); +#151982 = CARTESIAN_POINT('',(-6.575,2.735907866518,-2.14729635924)); +#151983 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#151984,#151985) + ,(#151986,#151987) + ,(#151988,#151989) + ,(#151990,#151991 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#151984 = CARTESIAN_POINT('',(-6.576,2.798605268872,-2.108825316335)); +#151985 = CARTESIAN_POINT('',(-6.575,2.798605268872,-2.108825316335)); +#151986 = CARTESIAN_POINT('',(-6.576,2.789039496042,-2.121510362914)); +#151987 = CARTESIAN_POINT('',(-6.575,2.789039496042,-2.121510362914)); +#151988 = CARTESIAN_POINT('',(-6.576,2.768036386133,-2.134403361078)); +#151989 = CARTESIAN_POINT('',(-6.575,2.768036386133,-2.134403361078)); +#151990 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#151991 = CARTESIAN_POINT('',(-6.575,2.735907866518,-2.14729635924)); +#151992 = ADVANCED_FACE('',(#151993),#152020,.F.); +#151993 = FACE_BOUND('',#151994,.F.); +#151994 = EDGE_LOOP('',(#151995,#151996,#152005,#152013)); +#151995 = ORIENTED_EDGE('',*,*,#151969,.F.); +#151996 = ORIENTED_EDGE('',*,*,#151997,.T.); +#151997 = EDGE_CURVE('',#151961,#151998,#152000,.T.); +#151998 = VERTEX_POINT('',#151999); +#151999 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152000 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152001,#152002,#152003, + #152004),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#152001 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#152002 = CARTESIAN_POINT('',(-6.576,2.709082112277,-2.157278035236)); +#152003 = CARTESIAN_POINT('',(-6.576,2.691302251909,-2.166012001734)); +#152004 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152005 = ORIENTED_EDGE('',*,*,#152006,.T.); +#152006 = EDGE_CURVE('',#151998,#152007,#152009,.T.); +#152007 = VERTEX_POINT('',#152008); +#152008 = CARTESIAN_POINT('',(-6.575,2.682568285412,-2.173290307148)); +#152009 = LINE('',#152010,#152011); +#152010 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152011 = VECTOR('',#152012,1.); +#152012 = DIRECTION('',(1.,-0.,-0.)); +#152013 = ORIENTED_EDGE('',*,*,#152014,.F.); +#152014 = EDGE_CURVE('',#151970,#152007,#152015,.T.); +#152015 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152016,#152017,#152018, + #152019),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#152016 = CARTESIAN_POINT('',(-6.575,2.735907866518,-2.14729635924)); +#152017 = CARTESIAN_POINT('',(-6.575,2.709082112277,-2.157278035236)); +#152018 = CARTESIAN_POINT('',(-6.575,2.691302251909,-2.166012001734)); +#152019 = CARTESIAN_POINT('',(-6.575,2.682568285412,-2.173290307148)); +#152020 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152021,#152022) + ,(#152023,#152024) + ,(#152025,#152026) + ,(#152027,#152028 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152021 = CARTESIAN_POINT('',(-6.576,2.735907866518,-2.14729635924)); +#152022 = CARTESIAN_POINT('',(-6.575,2.735907866518,-2.14729635924)); +#152023 = CARTESIAN_POINT('',(-6.576,2.709082112277,-2.157278035236)); +#152024 = CARTESIAN_POINT('',(-6.575,2.709082112277,-2.157278035236)); +#152025 = CARTESIAN_POINT('',(-6.576,2.691302251909,-2.166012001734)); +#152026 = CARTESIAN_POINT('',(-6.575,2.691302251909,-2.166012001734)); +#152027 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152028 = CARTESIAN_POINT('',(-6.575,2.682568285412,-2.173290307148)); +#152029 = ADVANCED_FACE('',(#152030),#152057,.F.); +#152030 = FACE_BOUND('',#152031,.F.); +#152031 = EDGE_LOOP('',(#152032,#152033,#152042,#152050)); +#152032 = ORIENTED_EDGE('',*,*,#152006,.F.); +#152033 = ORIENTED_EDGE('',*,*,#152034,.T.); +#152034 = EDGE_CURVE('',#151998,#152035,#152037,.T.); +#152035 = VERTEX_POINT('',#152036); +#152036 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152037 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152038,#152039,#152040, + #152041),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#152038 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152039 = CARTESIAN_POINT('',(-6.576,2.673834318914,-2.180568612563)); +#152040 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.189718482224)); +#152041 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152042 = ORIENTED_EDGE('',*,*,#152043,.T.); +#152043 = EDGE_CURVE('',#152035,#152044,#152046,.T.); +#152044 = VERTEX_POINT('',#152045); +#152045 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.200947867721)); +#152046 = LINE('',#152047,#152048); +#152047 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152048 = VECTOR('',#152049,1.); +#152049 = DIRECTION('',(1.,-0.,-0.)); +#152050 = ORIENTED_EDGE('',*,*,#152051,.F.); +#152051 = EDGE_CURVE('',#152007,#152044,#152052,.T.); +#152052 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152053,#152054,#152055, + #152056),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#152053 = CARTESIAN_POINT('',(-6.575,2.682568285412,-2.173290307148)); +#152054 = CARTESIAN_POINT('',(-6.575,2.673834318914,-2.180568612563)); +#152055 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.189718482224)); +#152056 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.200947867721)); +#152057 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152058,#152059) + ,(#152060,#152061) + ,(#152062,#152063) + ,(#152064,#152065 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152058 = CARTESIAN_POINT('',(-6.576,2.682568285412,-2.173290307148)); +#152059 = CARTESIAN_POINT('',(-6.575,2.682568285412,-2.173290307148)); +#152060 = CARTESIAN_POINT('',(-6.576,2.673834318914,-2.180568612563)); +#152061 = CARTESIAN_POINT('',(-6.575,2.673834318914,-2.180568612563)); +#152062 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.189718482224)); +#152063 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.189718482224)); +#152064 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152065 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.200947867721)); +#152066 = ADVANCED_FACE('',(#152067),#152085,.F.); +#152067 = FACE_BOUND('',#152068,.F.); +#152068 = EDGE_LOOP('',(#152069,#152070,#152077,#152078)); +#152069 = ORIENTED_EDGE('',*,*,#152043,.F.); +#152070 = ORIENTED_EDGE('',*,*,#152071,.T.); +#152071 = EDGE_CURVE('',#152035,#151334,#152072,.T.); +#152072 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152073,#152074,#152075, + #152076),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#152073 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152074 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.227149767213)); +#152075 = CARTESIAN_POINT('',(-6.576,2.68953466345,-2.240250716958)); +#152076 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#152077 = ORIENTED_EDGE('',*,*,#151333,.T.); +#152078 = ORIENTED_EDGE('',*,*,#152079,.F.); +#152079 = EDGE_CURVE('',#152044,#151336,#152080,.T.); +#152080 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152081,#152082,#152083, + #152084),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#152081 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.200947867721)); +#152082 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.227149767213)); +#152083 = CARTESIAN_POINT('',(-6.575,2.68953466345,-2.240250716958)); +#152084 = CARTESIAN_POINT('',(-6.575,2.729565343228,-2.240250716958)); +#152085 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152086,#152087) + ,(#152088,#152089) + ,(#152090,#152091) + ,(#152092,#152093 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152086 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.200947867721)); +#152087 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.200947867721)); +#152088 = CARTESIAN_POINT('',(-6.576,2.669467335666,-2.227149767213)); +#152089 = CARTESIAN_POINT('',(-6.575,2.669467335666,-2.227149767213)); +#152090 = CARTESIAN_POINT('',(-6.576,2.68953466345,-2.240250716958)); +#152091 = CARTESIAN_POINT('',(-6.575,2.68953466345,-2.240250716958)); +#152092 = CARTESIAN_POINT('',(-6.576,2.729565343228,-2.240250716958)); +#152093 = CARTESIAN_POINT('',(-6.575,2.729565343228,-2.240250716958)); +#152094 = ADVANCED_FACE('',(#152095),#152118,.F.); +#152095 = FACE_BOUND('',#152096,.T.); +#152096 = EDGE_LOOP('',(#152097,#152098,#152099,#152100,#152101,#152102, + #152103,#152104,#152105,#152106,#152107,#152108,#152109,#152110, + #152111,#152112,#152113,#152114,#152115,#152116,#152117)); +#152097 = ORIENTED_EDGE('',*,*,#151343,.T.); +#152098 = ORIENTED_EDGE('',*,*,#151395,.T.); +#152099 = ORIENTED_EDGE('',*,*,#151411,.T.); +#152100 = ORIENTED_EDGE('',*,*,#151448,.T.); +#152101 = ORIENTED_EDGE('',*,*,#151485,.T.); +#152102 = ORIENTED_EDGE('',*,*,#151522,.T.); +#152103 = ORIENTED_EDGE('',*,*,#151559,.T.); +#152104 = ORIENTED_EDGE('',*,*,#151596,.T.); +#152105 = ORIENTED_EDGE('',*,*,#151633,.T.); +#152106 = ORIENTED_EDGE('',*,*,#151670,.T.); +#152107 = ORIENTED_EDGE('',*,*,#151707,.T.); +#152108 = ORIENTED_EDGE('',*,*,#151744,.T.); +#152109 = ORIENTED_EDGE('',*,*,#151796,.T.); +#152110 = ORIENTED_EDGE('',*,*,#151812,.T.); +#152111 = ORIENTED_EDGE('',*,*,#151849,.T.); +#152112 = ORIENTED_EDGE('',*,*,#151886,.T.); +#152113 = ORIENTED_EDGE('',*,*,#151923,.T.); +#152114 = ORIENTED_EDGE('',*,*,#151960,.T.); +#152115 = ORIENTED_EDGE('',*,*,#151997,.T.); +#152116 = ORIENTED_EDGE('',*,*,#152034,.T.); +#152117 = ORIENTED_EDGE('',*,*,#152071,.T.); +#152118 = PLANE('',#152119); +#152119 = AXIS2_PLACEMENT_3D('',#152120,#152121,#152122); +#152120 = CARTESIAN_POINT('',(-6.576,2.772949242287,-2.233232351023)); +#152121 = DIRECTION('',(1.,0.,0.)); +#152122 = DIRECTION('',(0.,0.,-1.)); +#152123 = ADVANCED_FACE('',(#152124),#152147,.T.); +#152124 = FACE_BOUND('',#152125,.T.); +#152125 = EDGE_LOOP('',(#152126,#152127,#152128,#152129,#152130,#152131, + #152132,#152133,#152134,#152135,#152136,#152137,#152138,#152139, + #152140,#152141,#152142,#152143,#152144,#152145,#152146)); +#152126 = ORIENTED_EDGE('',*,*,#151360,.F.); +#152127 = ORIENTED_EDGE('',*,*,#152079,.F.); +#152128 = ORIENTED_EDGE('',*,*,#152051,.F.); +#152129 = ORIENTED_EDGE('',*,*,#152014,.F.); +#152130 = ORIENTED_EDGE('',*,*,#151977,.F.); +#152131 = ORIENTED_EDGE('',*,*,#151940,.F.); +#152132 = ORIENTED_EDGE('',*,*,#151903,.F.); +#152133 = ORIENTED_EDGE('',*,*,#151866,.F.); +#152134 = ORIENTED_EDGE('',*,*,#151829,.F.); +#152135 = ORIENTED_EDGE('',*,*,#151780,.F.); +#152136 = ORIENTED_EDGE('',*,*,#151761,.F.); +#152137 = ORIENTED_EDGE('',*,*,#151724,.F.); +#152138 = ORIENTED_EDGE('',*,*,#151687,.F.); +#152139 = ORIENTED_EDGE('',*,*,#151650,.F.); +#152140 = ORIENTED_EDGE('',*,*,#151613,.F.); +#152141 = ORIENTED_EDGE('',*,*,#151576,.F.); +#152142 = ORIENTED_EDGE('',*,*,#151539,.F.); +#152143 = ORIENTED_EDGE('',*,*,#151502,.F.); +#152144 = ORIENTED_EDGE('',*,*,#151465,.F.); +#152145 = ORIENTED_EDGE('',*,*,#151428,.F.); +#152146 = ORIENTED_EDGE('',*,*,#151379,.F.); +#152147 = PLANE('',#152148); +#152148 = AXIS2_PLACEMENT_3D('',#152149,#152150,#152151); +#152149 = CARTESIAN_POINT('',(-6.575,2.772949242287,-2.233232351023)); +#152150 = DIRECTION('',(1.,0.,0.)); +#152151 = DIRECTION('',(0.,0.,-1.)); +#152152 = MANIFOLD_SOLID_BREP('',#152153); +#152153 = CLOSED_SHELL('',(#152154,#152194,#152225,#152262,#152293, + #152324,#152355,#152386,#152417,#152448,#152485,#152522,#152553, + #152590,#152627,#152649,#152672)); +#152154 = ADVANCED_FACE('',(#152155),#152189,.F.); +#152155 = FACE_BOUND('',#152156,.T.); +#152156 = EDGE_LOOP('',(#152157,#152167,#152175,#152183)); +#152157 = ORIENTED_EDGE('',*,*,#152158,.T.); +#152158 = EDGE_CURVE('',#152159,#152161,#152163,.T.); +#152159 = VERTEX_POINT('',#152160); +#152160 = CARTESIAN_POINT('',(-6.575,2.311790612453,-1.984470269544)); +#152161 = VERTEX_POINT('',#152162); +#152162 = CARTESIAN_POINT('',(-6.575,2.3646103146,-1.984470269544)); +#152163 = LINE('',#152164,#152165); +#152164 = CARTESIAN_POINT('',(-6.575,2.3646103146,-1.984470269544)); +#152165 = VECTOR('',#152166,1.); +#152166 = DIRECTION('',(-0.,1.,-8.21058906746E-15)); +#152167 = ORIENTED_EDGE('',*,*,#152168,.F.); +#152168 = EDGE_CURVE('',#152169,#152161,#152171,.T.); +#152169 = VERTEX_POINT('',#152170); +#152170 = CARTESIAN_POINT('',(-6.576,2.3646103146,-1.984470269544)); +#152171 = LINE('',#152172,#152173); +#152172 = CARTESIAN_POINT('',(-6.576,2.3646103146,-1.984470269544)); +#152173 = VECTOR('',#152174,1.); +#152174 = DIRECTION('',(1.,-0.,-0.)); +#152175 = ORIENTED_EDGE('',*,*,#152176,.F.); +#152176 = EDGE_CURVE('',#152177,#152169,#152179,.T.); +#152177 = VERTEX_POINT('',#152178); +#152178 = CARTESIAN_POINT('',(-6.576,2.311790612453,-1.984470269544)); +#152179 = LINE('',#152180,#152181); +#152180 = CARTESIAN_POINT('',(-6.576,2.3646103146,-1.984470269544)); +#152181 = VECTOR('',#152182,1.); +#152182 = DIRECTION('',(-0.,1.,-8.21058906746E-15)); +#152183 = ORIENTED_EDGE('',*,*,#152184,.T.); +#152184 = EDGE_CURVE('',#152177,#152159,#152185,.T.); +#152185 = LINE('',#152186,#152187); +#152186 = CARTESIAN_POINT('',(-6.576,2.311790612453,-1.984470269544)); +#152187 = VECTOR('',#152188,1.); +#152188 = DIRECTION('',(1.,-0.,-0.)); +#152189 = PLANE('',#152190); +#152190 = AXIS2_PLACEMENT_3D('',#152191,#152192,#152193); +#152191 = CARTESIAN_POINT('',(-6.576,2.3646103146,-1.984470269544)); +#152192 = DIRECTION('',(0.,-8.21058906746E-15,-1.)); +#152193 = DIRECTION('',(0.,1.,-8.21058906746E-15)); +#152194 = ADVANCED_FACE('',(#152195),#152220,.F.); +#152195 = FACE_BOUND('',#152196,.T.); +#152196 = EDGE_LOOP('',(#152197,#152205,#152213,#152219)); +#152197 = ORIENTED_EDGE('',*,*,#152198,.T.); +#152198 = EDGE_CURVE('',#152161,#152199,#152201,.T.); +#152199 = VERTEX_POINT('',#152200); +#152200 = CARTESIAN_POINT('',(-6.575,2.443943843616,-2.203235335137)); +#152201 = LINE('',#152202,#152203); +#152202 = CARTESIAN_POINT('',(-6.575,2.443943843616,-2.203235335137)); +#152203 = VECTOR('',#152204,1.); +#152204 = DIRECTION('',(-0.,0.340917796219,-0.9400931104)); +#152205 = ORIENTED_EDGE('',*,*,#152206,.F.); +#152206 = EDGE_CURVE('',#152207,#152199,#152209,.T.); +#152207 = VERTEX_POINT('',#152208); +#152208 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152209 = LINE('',#152210,#152211); +#152210 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152211 = VECTOR('',#152212,1.); +#152212 = DIRECTION('',(1.,-0.,-0.)); +#152213 = ORIENTED_EDGE('',*,*,#152214,.F.); +#152214 = EDGE_CURVE('',#152169,#152207,#152215,.T.); +#152215 = LINE('',#152216,#152217); +#152216 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152217 = VECTOR('',#152218,1.); +#152218 = DIRECTION('',(-0.,0.340917796219,-0.9400931104)); +#152219 = ORIENTED_EDGE('',*,*,#152168,.T.); +#152220 = PLANE('',#152221); +#152221 = AXIS2_PLACEMENT_3D('',#152222,#152223,#152224); +#152222 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152223 = DIRECTION('',(0.,-0.9400931104,-0.340917796219)); +#152224 = DIRECTION('',(0.,0.340917796219,-0.9400931104)); +#152225 = ADVANCED_FACE('',(#152226),#152253,.F.); +#152226 = FACE_BOUND('',#152227,.F.); +#152227 = EDGE_LOOP('',(#152228,#152229,#152238,#152246)); +#152228 = ORIENTED_EDGE('',*,*,#152206,.F.); +#152229 = ORIENTED_EDGE('',*,*,#152230,.T.); +#152230 = EDGE_CURVE('',#152207,#152231,#152233,.T.); +#152231 = VERTEX_POINT('',#152232); +#152232 = CARTESIAN_POINT('',(-6.576,2.450182391115,-2.226733864047)); +#152233 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152234,#152235,#152236, + #152237),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#152234 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152235 = CARTESIAN_POINT('',(-6.576,2.447063117364,-2.213424962717)); +#152236 = CARTESIAN_POINT('',(-6.576,2.4491426332,-2.22132712288)); +#152237 = CARTESIAN_POINT('',(-6.576,2.450182391115,-2.226733864047)); +#152238 = ORIENTED_EDGE('',*,*,#152239,.T.); +#152239 = EDGE_CURVE('',#152231,#152240,#152242,.T.); +#152240 = VERTEX_POINT('',#152241); +#152241 = CARTESIAN_POINT('',(-6.575,2.450182391115,-2.226733864047)); +#152242 = LINE('',#152243,#152244); +#152243 = CARTESIAN_POINT('',(-6.576,2.450182391115,-2.226733864047)); +#152244 = VECTOR('',#152245,1.); +#152245 = DIRECTION('',(1.,-0.,-0.)); +#152246 = ORIENTED_EDGE('',*,*,#152247,.F.); +#152247 = EDGE_CURVE('',#152199,#152240,#152248,.T.); +#152248 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152249,#152250,#152251, + #152252),.UNSPECIFIED.,.F.,.F.,(4,4),(12.,13.), + .PIECEWISE_BEZIER_KNOTS.); +#152249 = CARTESIAN_POINT('',(-6.575,2.443943843616,-2.203235335137)); +#152250 = CARTESIAN_POINT('',(-6.575,2.447063117364,-2.213424962717)); +#152251 = CARTESIAN_POINT('',(-6.575,2.4491426332,-2.22132712288)); +#152252 = CARTESIAN_POINT('',(-6.575,2.450182391115,-2.226733864047)); +#152253 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152254,#152255) + ,(#152256,#152257) + ,(#152258,#152259) + ,(#152260,#152261 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(12.,13.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152254 = CARTESIAN_POINT('',(-6.576,2.443943843616,-2.203235335137)); +#152255 = CARTESIAN_POINT('',(-6.575,2.443943843616,-2.203235335137)); +#152256 = CARTESIAN_POINT('',(-6.576,2.447063117364,-2.213424962717)); +#152257 = CARTESIAN_POINT('',(-6.575,2.447063117364,-2.213424962717)); +#152258 = CARTESIAN_POINT('',(-6.576,2.4491426332,-2.22132712288)); +#152259 = CARTESIAN_POINT('',(-6.575,2.4491426332,-2.22132712288)); +#152260 = CARTESIAN_POINT('',(-6.576,2.450182391115,-2.226733864047)); +#152261 = CARTESIAN_POINT('',(-6.575,2.450182391115,-2.226733864047)); +#152262 = ADVANCED_FACE('',(#152263),#152288,.F.); +#152263 = FACE_BOUND('',#152264,.T.); +#152264 = EDGE_LOOP('',(#152265,#152273,#152281,#152287)); +#152265 = ORIENTED_EDGE('',*,*,#152266,.T.); +#152266 = EDGE_CURVE('',#152240,#152267,#152269,.T.); +#152267 = VERTEX_POINT('',#152268); +#152268 = CARTESIAN_POINT('',(-6.575,2.451534076405,-2.226733864047)); +#152269 = LINE('',#152270,#152271); +#152270 = CARTESIAN_POINT('',(-6.575,2.451534076405,-2.226733864047)); +#152271 = VECTOR('',#152272,1.); +#152272 = DIRECTION('',(-0.,1.,-0.)); +#152273 = ORIENTED_EDGE('',*,*,#152274,.F.); +#152274 = EDGE_CURVE('',#152275,#152267,#152277,.T.); +#152275 = VERTEX_POINT('',#152276); +#152276 = CARTESIAN_POINT('',(-6.576,2.451534076405,-2.226733864047)); +#152277 = LINE('',#152278,#152279); +#152278 = CARTESIAN_POINT('',(-6.576,2.451534076405,-2.226733864047)); +#152279 = VECTOR('',#152280,1.); +#152280 = DIRECTION('',(1.,-0.,-0.)); +#152281 = ORIENTED_EDGE('',*,*,#152282,.F.); +#152282 = EDGE_CURVE('',#152231,#152275,#152283,.T.); +#152283 = LINE('',#152284,#152285); +#152284 = CARTESIAN_POINT('',(-6.576,2.451534076405,-2.226733864047)); +#152285 = VECTOR('',#152286,1.); +#152286 = DIRECTION('',(-0.,1.,-0.)); +#152287 = ORIENTED_EDGE('',*,*,#152239,.T.); +#152288 = PLANE('',#152289); +#152289 = AXIS2_PLACEMENT_3D('',#152290,#152291,#152292); +#152290 = CARTESIAN_POINT('',(-6.576,2.451534076405,-2.226733864047)); +#152291 = DIRECTION('',(-0.,0.,-1.)); +#152292 = DIRECTION('',(-1.,0.,0.)); +#152293 = ADVANCED_FACE('',(#152294),#152319,.F.); +#152294 = FACE_BOUND('',#152295,.T.); +#152295 = EDGE_LOOP('',(#152296,#152304,#152312,#152318)); +#152296 = ORIENTED_EDGE('',*,*,#152297,.T.); +#152297 = EDGE_CURVE('',#152267,#152298,#152300,.T.); +#152298 = VERTEX_POINT('',#152299); +#152299 = CARTESIAN_POINT('',(-6.575,2.457772623904,-2.202819431971)); +#152300 = LINE('',#152301,#152302); +#152301 = CARTESIAN_POINT('',(-6.575,2.457772623904,-2.202819431971)); +#152302 = VECTOR('',#152303,1.); +#152303 = DIRECTION('',(-0.,0.252421897188,0.967617272386)); +#152304 = ORIENTED_EDGE('',*,*,#152305,.F.); +#152305 = EDGE_CURVE('',#152306,#152298,#152308,.T.); +#152306 = VERTEX_POINT('',#152307); +#152307 = CARTESIAN_POINT('',(-6.576,2.457772623904,-2.202819431971)); +#152308 = LINE('',#152309,#152310); +#152309 = CARTESIAN_POINT('',(-6.576,2.457772623904,-2.202819431971)); +#152310 = VECTOR('',#152311,1.); +#152311 = DIRECTION('',(1.,-0.,-0.)); +#152312 = ORIENTED_EDGE('',*,*,#152313,.F.); +#152313 = EDGE_CURVE('',#152275,#152306,#152314,.T.); +#152314 = LINE('',#152315,#152316); +#152315 = CARTESIAN_POINT('',(-6.576,2.457772623904,-2.202819431971)); +#152316 = VECTOR('',#152317,1.); +#152317 = DIRECTION('',(-0.,0.252421897188,0.967617272386)); +#152318 = ORIENTED_EDGE('',*,*,#152274,.T.); +#152319 = PLANE('',#152320); +#152320 = AXIS2_PLACEMENT_3D('',#152321,#152322,#152323); +#152321 = CARTESIAN_POINT('',(-6.576,2.457772623904,-2.202819431971)); +#152322 = DIRECTION('',(0.,0.967617272386,-0.252421897188)); +#152323 = DIRECTION('',(0.,0.252421897188,0.967617272386)); +#152324 = ADVANCED_FACE('',(#152325),#152350,.F.); +#152325 = FACE_BOUND('',#152326,.T.); +#152326 = EDGE_LOOP('',(#152327,#152335,#152343,#152349)); +#152327 = ORIENTED_EDGE('',*,*,#152328,.T.); +#152328 = EDGE_CURVE('',#152298,#152329,#152331,.T.); +#152329 = VERTEX_POINT('',#152330); +#152330 = CARTESIAN_POINT('',(-6.575,2.533674951794,-1.984470269544)); +#152331 = LINE('',#152332,#152333); +#152332 = CARTESIAN_POINT('',(-6.575,2.533674951794,-1.984470269544)); +#152333 = VECTOR('',#152334,1.); +#152334 = DIRECTION('',(-0.,0.328346164813,0.944557460429)); +#152335 = ORIENTED_EDGE('',*,*,#152336,.F.); +#152336 = EDGE_CURVE('',#152337,#152329,#152339,.T.); +#152337 = VERTEX_POINT('',#152338); +#152338 = CARTESIAN_POINT('',(-6.576,2.533674951794,-1.984470269544)); +#152339 = LINE('',#152340,#152341); +#152340 = CARTESIAN_POINT('',(-6.576,2.533674951794,-1.984470269544)); +#152341 = VECTOR('',#152342,1.); +#152342 = DIRECTION('',(1.,-0.,-0.)); +#152343 = ORIENTED_EDGE('',*,*,#152344,.F.); +#152344 = EDGE_CURVE('',#152306,#152337,#152345,.T.); +#152345 = LINE('',#152346,#152347); +#152346 = CARTESIAN_POINT('',(-6.576,2.533674951794,-1.984470269544)); +#152347 = VECTOR('',#152348,1.); +#152348 = DIRECTION('',(-0.,0.328346164813,0.944557460429)); +#152349 = ORIENTED_EDGE('',*,*,#152305,.T.); +#152350 = PLANE('',#152351); +#152351 = AXIS2_PLACEMENT_3D('',#152352,#152353,#152354); +#152352 = CARTESIAN_POINT('',(-6.576,2.533674951794,-1.984470269544)); +#152353 = DIRECTION('',(0.,0.944557460429,-0.328346164813)); +#152354 = DIRECTION('',(0.,0.328346164813,0.944557460429)); +#152355 = ADVANCED_FACE('',(#152356),#152381,.F.); +#152356 = FACE_BOUND('',#152357,.T.); +#152357 = EDGE_LOOP('',(#152358,#152366,#152374,#152380)); +#152358 = ORIENTED_EDGE('',*,*,#152359,.T.); +#152359 = EDGE_CURVE('',#152329,#152360,#152362,.T.); +#152360 = VERTEX_POINT('',#152361); +#152361 = CARTESIAN_POINT('',(-6.575,2.590653685609,-1.984470269544)); +#152362 = LINE('',#152363,#152364); +#152363 = CARTESIAN_POINT('',(-6.575,2.590653685609,-1.984470269544)); +#152364 = VECTOR('',#152365,1.); +#152365 = DIRECTION('',(-0.,1.,-7.61127599653E-15)); +#152366 = ORIENTED_EDGE('',*,*,#152367,.F.); +#152367 = EDGE_CURVE('',#152368,#152360,#152370,.T.); +#152368 = VERTEX_POINT('',#152369); +#152369 = CARTESIAN_POINT('',(-6.576,2.590653685609,-1.984470269544)); +#152370 = LINE('',#152371,#152372); +#152371 = CARTESIAN_POINT('',(-6.576,2.590653685609,-1.984470269544)); +#152372 = VECTOR('',#152373,1.); +#152373 = DIRECTION('',(1.,-0.,-0.)); +#152374 = ORIENTED_EDGE('',*,*,#152375,.F.); +#152375 = EDGE_CURVE('',#152337,#152368,#152376,.T.); +#152376 = LINE('',#152377,#152378); +#152377 = CARTESIAN_POINT('',(-6.576,2.590653685609,-1.984470269544)); +#152378 = VECTOR('',#152379,1.); +#152379 = DIRECTION('',(-0.,1.,-7.61127599653E-15)); +#152380 = ORIENTED_EDGE('',*,*,#152336,.T.); +#152381 = PLANE('',#152382); +#152382 = AXIS2_PLACEMENT_3D('',#152383,#152384,#152385); +#152383 = CARTESIAN_POINT('',(-6.576,2.590653685609,-1.984470269544)); +#152384 = DIRECTION('',(0.,-7.61127599653E-15,-1.)); +#152385 = DIRECTION('',(0.,1.,-7.61127599653E-15)); +#152386 = ADVANCED_FACE('',(#152387),#152412,.F.); +#152387 = FACE_BOUND('',#152388,.T.); +#152388 = EDGE_LOOP('',(#152389,#152397,#152405,#152411)); +#152389 = ORIENTED_EDGE('',*,*,#152390,.T.); +#152390 = EDGE_CURVE('',#152360,#152391,#152393,.T.); +#152391 = VERTEX_POINT('',#152392); +#152392 = CARTESIAN_POINT('',(-6.575,2.47669621798,-2.274354776613)); +#152393 = LINE('',#152394,#152395); +#152394 = CARTESIAN_POINT('',(-6.575,2.47669621798,-2.274354776613)); +#152395 = VECTOR('',#152396,1.); +#152396 = DIRECTION('',(-0.,-0.365858921669,-0.930670322636)); +#152397 = ORIENTED_EDGE('',*,*,#152398,.F.); +#152398 = EDGE_CURVE('',#152399,#152391,#152401,.T.); +#152399 = VERTEX_POINT('',#152400); +#152400 = CARTESIAN_POINT('',(-6.576,2.47669621798,-2.274354776613)); +#152401 = LINE('',#152402,#152403); +#152402 = CARTESIAN_POINT('',(-6.576,2.47669621798,-2.274354776613)); +#152403 = VECTOR('',#152404,1.); +#152404 = DIRECTION('',(1.,-0.,-0.)); +#152405 = ORIENTED_EDGE('',*,*,#152406,.F.); +#152406 = EDGE_CURVE('',#152368,#152399,#152407,.T.); +#152407 = LINE('',#152408,#152409); +#152408 = CARTESIAN_POINT('',(-6.576,2.47669621798,-2.274354776613)); +#152409 = VECTOR('',#152410,1.); +#152410 = DIRECTION('',(-0.,-0.365858921669,-0.930670322636)); +#152411 = ORIENTED_EDGE('',*,*,#152367,.T.); +#152412 = PLANE('',#152413); +#152413 = AXIS2_PLACEMENT_3D('',#152414,#152415,#152416); +#152414 = CARTESIAN_POINT('',(-6.576,2.47669621798,-2.274354776613)); +#152415 = DIRECTION('',(0.,-0.930670322636,0.365858921669)); +#152416 = DIRECTION('',(0.,-0.365858921669,-0.930670322636)); +#152417 = ADVANCED_FACE('',(#152418),#152443,.F.); +#152418 = FACE_BOUND('',#152419,.T.); +#152419 = EDGE_LOOP('',(#152420,#152428,#152436,#152442)); +#152420 = ORIENTED_EDGE('',*,*,#152421,.T.); +#152421 = EDGE_CURVE('',#152391,#152422,#152424,.T.); +#152422 = VERTEX_POINT('',#152423); +#152423 = CARTESIAN_POINT('',(-6.575,2.499051013182,-2.327174478763)); +#152424 = LINE('',#152425,#152426); +#152425 = CARTESIAN_POINT('',(-6.575,2.499051013182,-2.327174478763)); +#152426 = VECTOR('',#152427,1.); +#152427 = DIRECTION('',(-0.,0.389758265065,-0.920917203017)); +#152428 = ORIENTED_EDGE('',*,*,#152429,.F.); +#152429 = EDGE_CURVE('',#152430,#152422,#152432,.T.); +#152430 = VERTEX_POINT('',#152431); +#152431 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152432 = LINE('',#152433,#152434); +#152433 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152434 = VECTOR('',#152435,1.); +#152435 = DIRECTION('',(1.,-0.,-0.)); +#152436 = ORIENTED_EDGE('',*,*,#152437,.F.); +#152437 = EDGE_CURVE('',#152399,#152430,#152438,.T.); +#152438 = LINE('',#152439,#152440); +#152439 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152440 = VECTOR('',#152441,1.); +#152441 = DIRECTION('',(-0.,0.389758265065,-0.920917203017)); +#152442 = ORIENTED_EDGE('',*,*,#152398,.T.); +#152443 = PLANE('',#152444); +#152444 = AXIS2_PLACEMENT_3D('',#152445,#152446,#152447); +#152445 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152446 = DIRECTION('',(0.,-0.920917203017,-0.389758265065)); +#152447 = DIRECTION('',(0.,0.389758265065,-0.920917203017)); +#152448 = ADVANCED_FACE('',(#152449),#152476,.F.); +#152449 = FACE_BOUND('',#152450,.F.); +#152450 = EDGE_LOOP('',(#152451,#152452,#152461,#152469)); +#152451 = ORIENTED_EDGE('',*,*,#152429,.F.); +#152452 = ORIENTED_EDGE('',*,*,#152453,.T.); +#152453 = EDGE_CURVE('',#152430,#152454,#152456,.T.); +#152454 = VERTEX_POINT('',#152455); +#152455 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152456 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152457,#152458,#152459, + #152460),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#152457 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152458 = CARTESIAN_POINT('',(-6.576,2.510592326052,-2.354624087753)); +#152459 = CARTESIAN_POINT('',(-6.576,2.527956283254,-2.368140940666)); +#152460 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152461 = ORIENTED_EDGE('',*,*,#152462,.T.); +#152462 = EDGE_CURVE('',#152454,#152463,#152465,.T.); +#152463 = VERTEX_POINT('',#152464); +#152464 = CARTESIAN_POINT('',(-6.575,2.551246860581,-2.368140940666)); +#152465 = LINE('',#152466,#152467); +#152466 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152467 = VECTOR('',#152468,1.); +#152468 = DIRECTION('',(1.,-0.,-0.)); +#152469 = ORIENTED_EDGE('',*,*,#152470,.F.); +#152470 = EDGE_CURVE('',#152422,#152463,#152471,.T.); +#152471 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152472,#152473,#152474, + #152475),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#152472 = CARTESIAN_POINT('',(-6.575,2.499051013182,-2.327174478763)); +#152473 = CARTESIAN_POINT('',(-6.575,2.510592326052,-2.354624087753)); +#152474 = CARTESIAN_POINT('',(-6.575,2.527956283254,-2.368140940666)); +#152475 = CARTESIAN_POINT('',(-6.575,2.551246860581,-2.368140940666)); +#152476 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152477,#152478) + ,(#152479,#152480) + ,(#152481,#152482) + ,(#152483,#152484 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152477 = CARTESIAN_POINT('',(-6.576,2.499051013182,-2.327174478763)); +#152478 = CARTESIAN_POINT('',(-6.575,2.499051013182,-2.327174478763)); +#152479 = CARTESIAN_POINT('',(-6.576,2.510592326052,-2.354624087753)); +#152480 = CARTESIAN_POINT('',(-6.575,2.510592326052,-2.354624087753)); +#152481 = CARTESIAN_POINT('',(-6.576,2.527956283254,-2.368140940666)); +#152482 = CARTESIAN_POINT('',(-6.575,2.527956283254,-2.368140940666)); +#152483 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152484 = CARTESIAN_POINT('',(-6.575,2.551246860581,-2.368140940666)); +#152485 = ADVANCED_FACE('',(#152486),#152513,.F.); +#152486 = FACE_BOUND('',#152487,.F.); +#152487 = EDGE_LOOP('',(#152488,#152489,#152498,#152506)); +#152488 = ORIENTED_EDGE('',*,*,#152462,.F.); +#152489 = ORIENTED_EDGE('',*,*,#152490,.T.); +#152490 = EDGE_CURVE('',#152454,#152491,#152493,.T.); +#152491 = VERTEX_POINT('',#152492); +#152492 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.362318296333)); +#152493 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152494,#152495,#152496, + #152497),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#152494 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152495 = CARTESIAN_POINT('',(-6.576,2.560604681827,-2.368140940666)); +#152496 = CARTESIAN_POINT('',(-6.576,2.570170454657,-2.366269376416)); +#152497 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.362318296333)); +#152498 = ORIENTED_EDGE('',*,*,#152499,.T.); +#152499 = EDGE_CURVE('',#152491,#152500,#152502,.T.); +#152500 = VERTEX_POINT('',#152501); +#152501 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.362318296333)); +#152502 = LINE('',#152503,#152504); +#152503 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.362318296333)); +#152504 = VECTOR('',#152505,1.); +#152505 = DIRECTION('',(1.,-0.,-0.)); +#152506 = ORIENTED_EDGE('',*,*,#152507,.F.); +#152507 = EDGE_CURVE('',#152463,#152500,#152508,.T.); +#152508 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152509,#152510,#152511, + #152512),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#152509 = CARTESIAN_POINT('',(-6.575,2.551246860581,-2.368140940666)); +#152510 = CARTESIAN_POINT('',(-6.575,2.560604681827,-2.368140940666)); +#152511 = CARTESIAN_POINT('',(-6.575,2.570170454657,-2.366269376416)); +#152512 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.362318296333)); +#152513 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152514,#152515) + ,(#152516,#152517) + ,(#152518,#152519) + ,(#152520,#152521 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152514 = CARTESIAN_POINT('',(-6.576,2.551246860581,-2.368140940666)); +#152515 = CARTESIAN_POINT('',(-6.575,2.551246860581,-2.368140940666)); +#152516 = CARTESIAN_POINT('',(-6.576,2.560604681827,-2.368140940666)); +#152517 = CARTESIAN_POINT('',(-6.575,2.560604681827,-2.368140940666)); +#152518 = CARTESIAN_POINT('',(-6.576,2.570170454657,-2.366269376416)); +#152519 = CARTESIAN_POINT('',(-6.575,2.570170454657,-2.366269376416)); +#152520 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.362318296333)); +#152521 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.362318296333)); +#152522 = ADVANCED_FACE('',(#152523),#152548,.F.); +#152523 = FACE_BOUND('',#152524,.T.); +#152524 = EDGE_LOOP('',(#152525,#152533,#152541,#152547)); +#152525 = ORIENTED_EDGE('',*,*,#152526,.T.); +#152526 = EDGE_CURVE('',#152500,#152527,#152529,.T.); +#152527 = VERTEX_POINT('',#152528); +#152528 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.407651741485)); +#152529 = LINE('',#152530,#152531); +#152530 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.407651741485)); +#152531 = VECTOR('',#152532,1.); +#152532 = DIRECTION('',(-0.,-1.91329323212E-14,-1.)); +#152533 = ORIENTED_EDGE('',*,*,#152534,.F.); +#152534 = EDGE_CURVE('',#152535,#152527,#152537,.T.); +#152535 = VERTEX_POINT('',#152536); +#152536 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152537 = LINE('',#152538,#152539); +#152538 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152539 = VECTOR('',#152540,1.); +#152540 = DIRECTION('',(1.,-0.,-0.)); +#152541 = ORIENTED_EDGE('',*,*,#152542,.F.); +#152542 = EDGE_CURVE('',#152491,#152535,#152543,.T.); +#152543 = LINE('',#152544,#152545); +#152544 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152545 = VECTOR('',#152546,1.); +#152546 = DIRECTION('',(-0.,-1.91329323212E-14,-1.)); +#152547 = ORIENTED_EDGE('',*,*,#152499,.T.); +#152548 = PLANE('',#152549); +#152549 = AXIS2_PLACEMENT_3D('',#152550,#152551,#152552); +#152550 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152551 = DIRECTION('',(0.,-1.,1.91329323212E-14)); +#152552 = DIRECTION('',(0.,-1.91329323212E-14,-1.)); +#152553 = ADVANCED_FACE('',(#152554),#152581,.F.); +#152554 = FACE_BOUND('',#152555,.F.); +#152555 = EDGE_LOOP('',(#152556,#152557,#152566,#152574)); +#152556 = ORIENTED_EDGE('',*,*,#152534,.F.); +#152557 = ORIENTED_EDGE('',*,*,#152558,.T.); +#152558 = EDGE_CURVE('',#152535,#152559,#152561,.T.); +#152559 = VERTEX_POINT('',#152560); +#152560 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152561 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152562,#152563,#152564, + #152565),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#152562 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152563 = CARTESIAN_POINT('',(-6.576,2.571106236782,-2.410355112067)); +#152564 = CARTESIAN_POINT('',(-6.576,2.560084802869,-2.411810773151)); +#152565 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152566 = ORIENTED_EDGE('',*,*,#152567,.T.); +#152567 = EDGE_CURVE('',#152559,#152568,#152570,.T.); +#152568 = VERTEX_POINT('',#152569); +#152569 = CARTESIAN_POINT('',(-6.575,2.547295780498,-2.411810773151)); +#152570 = LINE('',#152571,#152572); +#152571 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152572 = VECTOR('',#152573,1.); +#152573 = DIRECTION('',(1.,-0.,-0.)); +#152574 = ORIENTED_EDGE('',*,*,#152575,.F.); +#152575 = EDGE_CURVE('',#152527,#152568,#152576,.T.); +#152576 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152577,#152578,#152579, + #152580),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#152577 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.407651741485)); +#152578 = CARTESIAN_POINT('',(-6.575,2.571106236782,-2.410355112067)); +#152579 = CARTESIAN_POINT('',(-6.575,2.560084802869,-2.411810773151)); +#152580 = CARTESIAN_POINT('',(-6.575,2.547295780498,-2.411810773151)); +#152581 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152582,#152583) + ,(#152584,#152585) + ,(#152586,#152587) + ,(#152588,#152589 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152582 = CARTESIAN_POINT('',(-6.576,2.580152130653,-2.407651741485)); +#152583 = CARTESIAN_POINT('',(-6.575,2.580152130653,-2.407651741485)); +#152584 = CARTESIAN_POINT('',(-6.576,2.571106236782,-2.410355112067)); +#152585 = CARTESIAN_POINT('',(-6.575,2.571106236782,-2.410355112067)); +#152586 = CARTESIAN_POINT('',(-6.576,2.560084802869,-2.411810773151)); +#152587 = CARTESIAN_POINT('',(-6.575,2.560084802869,-2.411810773151)); +#152588 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152589 = CARTESIAN_POINT('',(-6.575,2.547295780498,-2.411810773151)); +#152590 = ADVANCED_FACE('',(#152591),#152618,.F.); +#152591 = FACE_BOUND('',#152592,.F.); +#152592 = EDGE_LOOP('',(#152593,#152594,#152603,#152611)); +#152593 = ORIENTED_EDGE('',*,*,#152567,.F.); +#152594 = ORIENTED_EDGE('',*,*,#152595,.T.); +#152595 = EDGE_CURVE('',#152559,#152596,#152598,.T.); +#152596 = VERTEX_POINT('',#152597); +#152597 = CARTESIAN_POINT('',(-6.576,2.443631916241,-2.31885641543)); +#152598 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152599,#152600,#152601, + #152602),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#152599 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152600 = CARTESIAN_POINT('',(-6.576,2.502690165889,-2.411810773151)); +#152601 = CARTESIAN_POINT('',(-6.576,2.468170203066,-2.380825987244)); +#152602 = CARTESIAN_POINT('',(-6.576,2.443631916241,-2.31885641543)); +#152603 = ORIENTED_EDGE('',*,*,#152604,.T.); +#152604 = EDGE_CURVE('',#152596,#152605,#152607,.T.); +#152605 = VERTEX_POINT('',#152606); +#152606 = CARTESIAN_POINT('',(-6.575,2.443631916241,-2.31885641543)); +#152607 = LINE('',#152608,#152609); +#152608 = CARTESIAN_POINT('',(-6.576,2.443631916241,-2.31885641543)); +#152609 = VECTOR('',#152610,1.); +#152610 = DIRECTION('',(1.,-0.,-0.)); +#152611 = ORIENTED_EDGE('',*,*,#152612,.F.); +#152612 = EDGE_CURVE('',#152568,#152605,#152613,.T.); +#152613 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#152614,#152615,#152616, + #152617),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#152614 = CARTESIAN_POINT('',(-6.575,2.547295780498,-2.411810773151)); +#152615 = CARTESIAN_POINT('',(-6.575,2.502690165889,-2.411810773151)); +#152616 = CARTESIAN_POINT('',(-6.575,2.468170203066,-2.380825987244)); +#152617 = CARTESIAN_POINT('',(-6.575,2.443631916241,-2.31885641543)); +#152618 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#152619,#152620) + ,(#152621,#152622) + ,(#152623,#152624) + ,(#152625,#152626 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#152619 = CARTESIAN_POINT('',(-6.576,2.547295780498,-2.411810773151)); +#152620 = CARTESIAN_POINT('',(-6.575,2.547295780498,-2.411810773151)); +#152621 = CARTESIAN_POINT('',(-6.576,2.502690165889,-2.411810773151)); +#152622 = CARTESIAN_POINT('',(-6.575,2.502690165889,-2.411810773151)); +#152623 = CARTESIAN_POINT('',(-6.576,2.468170203066,-2.380825987244)); +#152624 = CARTESIAN_POINT('',(-6.575,2.468170203066,-2.380825987244)); +#152625 = CARTESIAN_POINT('',(-6.576,2.443631916241,-2.31885641543)); +#152626 = CARTESIAN_POINT('',(-6.575,2.443631916241,-2.31885641543)); +#152627 = ADVANCED_FACE('',(#152628),#152644,.F.); +#152628 = FACE_BOUND('',#152629,.T.); +#152629 = EDGE_LOOP('',(#152630,#152636,#152637,#152643)); +#152630 = ORIENTED_EDGE('',*,*,#152631,.T.); +#152631 = EDGE_CURVE('',#152605,#152159,#152632,.T.); +#152632 = LINE('',#152633,#152634); +#152633 = CARTESIAN_POINT('',(-6.575,2.311790612453,-1.984470269544)); +#152634 = VECTOR('',#152635,1.); +#152635 = DIRECTION('',(-0.,-0.366797678951,0.930300737781)); +#152636 = ORIENTED_EDGE('',*,*,#152184,.F.); +#152637 = ORIENTED_EDGE('',*,*,#152638,.F.); +#152638 = EDGE_CURVE('',#152596,#152177,#152639,.T.); +#152639 = LINE('',#152640,#152641); +#152640 = CARTESIAN_POINT('',(-6.576,2.311790612453,-1.984470269544)); +#152641 = VECTOR('',#152642,1.); +#152642 = DIRECTION('',(-0.,-0.366797678951,0.930300737781)); +#152643 = ORIENTED_EDGE('',*,*,#152604,.T.); +#152644 = PLANE('',#152645); +#152645 = AXIS2_PLACEMENT_3D('',#152646,#152647,#152648); +#152646 = CARTESIAN_POINT('',(-6.576,2.311790612453,-1.984470269544)); +#152647 = DIRECTION('',(0.,0.930300737781,0.366797678951)); +#152648 = DIRECTION('',(0.,-0.366797678951,0.930300737781)); +#152649 = ADVANCED_FACE('',(#152650),#152667,.T.); +#152650 = FACE_BOUND('',#152651,.T.); +#152651 = EDGE_LOOP('',(#152652,#152653,#152654,#152655,#152656,#152657, + #152658,#152659,#152660,#152661,#152662,#152663,#152664,#152665, + #152666)); +#152652 = ORIENTED_EDGE('',*,*,#152176,.T.); +#152653 = ORIENTED_EDGE('',*,*,#152214,.T.); +#152654 = ORIENTED_EDGE('',*,*,#152230,.T.); +#152655 = ORIENTED_EDGE('',*,*,#152282,.T.); +#152656 = ORIENTED_EDGE('',*,*,#152313,.T.); +#152657 = ORIENTED_EDGE('',*,*,#152344,.T.); +#152658 = ORIENTED_EDGE('',*,*,#152375,.T.); +#152659 = ORIENTED_EDGE('',*,*,#152406,.T.); +#152660 = ORIENTED_EDGE('',*,*,#152437,.T.); +#152661 = ORIENTED_EDGE('',*,*,#152453,.T.); +#152662 = ORIENTED_EDGE('',*,*,#152490,.T.); +#152663 = ORIENTED_EDGE('',*,*,#152542,.T.); +#152664 = ORIENTED_EDGE('',*,*,#152558,.T.); +#152665 = ORIENTED_EDGE('',*,*,#152595,.T.); +#152666 = ORIENTED_EDGE('',*,*,#152638,.T.); +#152667 = PLANE('',#152668); +#152668 = AXIS2_PLACEMENT_3D('',#152669,#152670,#152671); +#152669 = CARTESIAN_POINT('',(-6.576,2.48793860045,-2.388572183721)); +#152670 = DIRECTION('',(-1.,0.,0.)); +#152671 = DIRECTION('',(0.,0.,1.)); +#152672 = ADVANCED_FACE('',(#152673),#152690,.F.); +#152673 = FACE_BOUND('',#152674,.T.); +#152674 = EDGE_LOOP('',(#152675,#152676,#152677,#152678,#152679,#152680, + #152681,#152682,#152683,#152684,#152685,#152686,#152687,#152688, + #152689)); +#152675 = ORIENTED_EDGE('',*,*,#152158,.F.); +#152676 = ORIENTED_EDGE('',*,*,#152631,.F.); +#152677 = ORIENTED_EDGE('',*,*,#152612,.F.); +#152678 = ORIENTED_EDGE('',*,*,#152575,.F.); +#152679 = ORIENTED_EDGE('',*,*,#152526,.F.); +#152680 = ORIENTED_EDGE('',*,*,#152507,.F.); +#152681 = ORIENTED_EDGE('',*,*,#152470,.F.); +#152682 = ORIENTED_EDGE('',*,*,#152421,.F.); +#152683 = ORIENTED_EDGE('',*,*,#152390,.F.); +#152684 = ORIENTED_EDGE('',*,*,#152359,.F.); +#152685 = ORIENTED_EDGE('',*,*,#152328,.F.); +#152686 = ORIENTED_EDGE('',*,*,#152297,.F.); +#152687 = ORIENTED_EDGE('',*,*,#152266,.F.); +#152688 = ORIENTED_EDGE('',*,*,#152247,.F.); +#152689 = ORIENTED_EDGE('',*,*,#152198,.F.); +#152690 = PLANE('',#152691); +#152691 = AXIS2_PLACEMENT_3D('',#152692,#152693,#152694); +#152692 = CARTESIAN_POINT('',(-6.575,2.48793860045,-2.388572183721)); +#152693 = DIRECTION('',(-1.,0.,0.)); +#152694 = DIRECTION('',(0.,0.,1.)); +#152695 = MANIFOLD_SOLID_BREP('',#152696); +#152696 = CLOSED_SHELL('',(#152697,#152737,#152768,#152799,#152830, + #152861,#152892,#152923,#152954,#152985,#153016,#153047,#153069, + #153089)); +#152697 = ADVANCED_FACE('',(#152698),#152732,.F.); +#152698 = FACE_BOUND('',#152699,.T.); +#152699 = EDGE_LOOP('',(#152700,#152710,#152718,#152726)); +#152700 = ORIENTED_EDGE('',*,*,#152701,.T.); +#152701 = EDGE_CURVE('',#152702,#152704,#152706,.T.); +#152702 = VERTEX_POINT('',#152703); +#152703 = CARTESIAN_POINT('',(-6.575,2.038126328877,-2.274978631362)); +#152704 = VERTEX_POINT('',#152705); +#152705 = CARTESIAN_POINT('',(-6.575,2.038126328877,-2.228605428294)); +#152706 = LINE('',#152707,#152708); +#152707 = CARTESIAN_POINT('',(-6.575,2.038126328877,-2.228605428294)); +#152708 = VECTOR('',#152709,1.); +#152709 = DIRECTION('',(-0.,9.351971403878E-15,1.)); +#152710 = ORIENTED_EDGE('',*,*,#152711,.F.); +#152711 = EDGE_CURVE('',#152712,#152704,#152714,.T.); +#152712 = VERTEX_POINT('',#152713); +#152713 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.228605428294)); +#152714 = LINE('',#152715,#152716); +#152715 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.228605428294)); +#152716 = VECTOR('',#152717,1.); +#152717 = DIRECTION('',(1.,-0.,-0.)); +#152718 = ORIENTED_EDGE('',*,*,#152719,.F.); +#152719 = EDGE_CURVE('',#152720,#152712,#152722,.T.); +#152720 = VERTEX_POINT('',#152721); +#152721 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.274978631362)); +#152722 = LINE('',#152723,#152724); +#152723 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.228605428294)); +#152724 = VECTOR('',#152725,1.); +#152725 = DIRECTION('',(-0.,9.351971403878E-15,1.)); +#152726 = ORIENTED_EDGE('',*,*,#152727,.T.); +#152727 = EDGE_CURVE('',#152720,#152702,#152728,.T.); +#152728 = LINE('',#152729,#152730); +#152729 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.274978631362)); +#152730 = VECTOR('',#152731,1.); +#152731 = DIRECTION('',(1.,-0.,-0.)); +#152732 = PLANE('',#152733); +#152733 = AXIS2_PLACEMENT_3D('',#152734,#152735,#152736); +#152734 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.228605428294)); +#152735 = DIRECTION('',(0.,1.,-9.351971403878E-15)); +#152736 = DIRECTION('',(0.,9.351971403878E-15,1.)); +#152737 = ADVANCED_FACE('',(#152738),#152763,.F.); +#152738 = FACE_BOUND('',#152739,.T.); +#152739 = EDGE_LOOP('',(#152740,#152748,#152756,#152762)); +#152740 = ORIENTED_EDGE('',*,*,#152741,.T.); +#152741 = EDGE_CURVE('',#152704,#152742,#152744,.T.); +#152742 = VERTEX_POINT('',#152743); +#152743 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.228605428294)); +#152744 = LINE('',#152745,#152746); +#152745 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.228605428294)); +#152746 = VECTOR('',#152747,1.); +#152747 = DIRECTION('',(-0.,1.,-1.043396934619E-14)); +#152748 = ORIENTED_EDGE('',*,*,#152749,.F.); +#152749 = EDGE_CURVE('',#152750,#152742,#152752,.T.); +#152750 = VERTEX_POINT('',#152751); +#152751 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.228605428294)); +#152752 = LINE('',#152753,#152754); +#152753 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.228605428294)); +#152754 = VECTOR('',#152755,1.); +#152755 = DIRECTION('',(1.,-0.,-0.)); +#152756 = ORIENTED_EDGE('',*,*,#152757,.F.); +#152757 = EDGE_CURVE('',#152712,#152750,#152758,.T.); +#152758 = LINE('',#152759,#152760); +#152759 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.228605428294)); +#152760 = VECTOR('',#152761,1.); +#152761 = DIRECTION('',(-0.,1.,-1.043396934619E-14)); +#152762 = ORIENTED_EDGE('',*,*,#152711,.T.); +#152763 = PLANE('',#152764); +#152764 = AXIS2_PLACEMENT_3D('',#152765,#152766,#152767); +#152765 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.228605428294)); +#152766 = DIRECTION('',(0.,-1.043396934619E-14,-1.)); +#152767 = DIRECTION('',(0.,1.,-1.043396934619E-14)); +#152768 = ADVANCED_FACE('',(#152769),#152794,.F.); +#152769 = FACE_BOUND('',#152770,.T.); +#152770 = EDGE_LOOP('',(#152771,#152779,#152787,#152793)); +#152771 = ORIENTED_EDGE('',*,*,#152772,.T.); +#152772 = EDGE_CURVE('',#152742,#152773,#152775,.T.); +#152773 = VERTEX_POINT('',#152774); +#152774 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.091773286508)); +#152775 = LINE('',#152776,#152777); +#152776 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.091773286508)); +#152777 = VECTOR('',#152778,1.); +#152778 = DIRECTION('',(-0.,9.508311351374E-15,1.)); +#152779 = ORIENTED_EDGE('',*,*,#152780,.F.); +#152780 = EDGE_CURVE('',#152781,#152773,#152783,.T.); +#152781 = VERTEX_POINT('',#152782); +#152782 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.091773286508)); +#152783 = LINE('',#152784,#152785); +#152784 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.091773286508)); +#152785 = VECTOR('',#152786,1.); +#152786 = DIRECTION('',(1.,-0.,-0.)); +#152787 = ORIENTED_EDGE('',*,*,#152788,.F.); +#152788 = EDGE_CURVE('',#152750,#152781,#152789,.T.); +#152789 = LINE('',#152790,#152791); +#152790 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.091773286508)); +#152791 = VECTOR('',#152792,1.); +#152792 = DIRECTION('',(-0.,9.508311351374E-15,1.)); +#152793 = ORIENTED_EDGE('',*,*,#152749,.T.); +#152794 = PLANE('',#152795); +#152795 = AXIS2_PLACEMENT_3D('',#152796,#152797,#152798); +#152796 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.091773286508)); +#152797 = DIRECTION('',(0.,1.,-9.508311351374E-15)); +#152798 = DIRECTION('',(0.,9.508311351374E-15,1.)); +#152799 = ADVANCED_FACE('',(#152800),#152825,.F.); +#152800 = FACE_BOUND('',#152801,.T.); +#152801 = EDGE_LOOP('',(#152802,#152810,#152818,#152824)); +#152802 = ORIENTED_EDGE('',*,*,#152803,.T.); +#152803 = EDGE_CURVE('',#152773,#152804,#152806,.T.); +#152804 = VERTEX_POINT('',#152805); +#152805 = CARTESIAN_POINT('',(-6.575,2.058921487204,-2.091773286508)); +#152806 = LINE('',#152807,#152808); +#152807 = CARTESIAN_POINT('',(-6.575,2.058921487204,-2.091773286508)); +#152808 = VECTOR('',#152809,1.); +#152809 = DIRECTION('',(-0.,-1.,8.944201385657E-15)); +#152810 = ORIENTED_EDGE('',*,*,#152811,.F.); +#152811 = EDGE_CURVE('',#152812,#152804,#152814,.T.); +#152812 = VERTEX_POINT('',#152813); +#152813 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.091773286508)); +#152814 = LINE('',#152815,#152816); +#152815 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.091773286508)); +#152816 = VECTOR('',#152817,1.); +#152817 = DIRECTION('',(1.,-0.,-0.)); +#152818 = ORIENTED_EDGE('',*,*,#152819,.F.); +#152819 = EDGE_CURVE('',#152781,#152812,#152820,.T.); +#152820 = LINE('',#152821,#152822); +#152821 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.091773286508)); +#152822 = VECTOR('',#152823,1.); +#152823 = DIRECTION('',(-0.,-1.,8.944201385657E-15)); +#152824 = ORIENTED_EDGE('',*,*,#152780,.T.); +#152825 = PLANE('',#152826); +#152826 = AXIS2_PLACEMENT_3D('',#152827,#152828,#152829); +#152827 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.091773286508)); +#152828 = DIRECTION('',(0.,8.944201385657E-15,1.)); +#152829 = DIRECTION('',(0.,-1.,8.944201385657E-15)); +#152830 = ADVANCED_FACE('',(#152831),#152856,.F.); +#152831 = FACE_BOUND('',#152832,.T.); +#152832 = EDGE_LOOP('',(#152833,#152841,#152849,#152855)); +#152833 = ORIENTED_EDGE('',*,*,#152834,.T.); +#152834 = EDGE_CURVE('',#152804,#152835,#152837,.T.); +#152835 = VERTEX_POINT('',#152836); +#152836 = CARTESIAN_POINT('',(-6.575,2.058921487204,-2.045192131857)); +#152837 = LINE('',#152838,#152839); +#152838 = CARTESIAN_POINT('',(-6.575,2.058921487204,-2.045192131857)); +#152839 = VECTOR('',#152840,1.); +#152840 = DIRECTION('',(-0.,1.862044306318E-14,1.)); +#152841 = ORIENTED_EDGE('',*,*,#152842,.F.); +#152842 = EDGE_CURVE('',#152843,#152835,#152845,.T.); +#152843 = VERTEX_POINT('',#152844); +#152844 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.045192131857)); +#152845 = LINE('',#152846,#152847); +#152846 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.045192131857)); +#152847 = VECTOR('',#152848,1.); +#152848 = DIRECTION('',(1.,-0.,-0.)); +#152849 = ORIENTED_EDGE('',*,*,#152850,.F.); +#152850 = EDGE_CURVE('',#152812,#152843,#152851,.T.); +#152851 = LINE('',#152852,#152853); +#152852 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.045192131857)); +#152853 = VECTOR('',#152854,1.); +#152854 = DIRECTION('',(-0.,1.862044306318E-14,1.)); +#152855 = ORIENTED_EDGE('',*,*,#152811,.T.); +#152856 = PLANE('',#152857); +#152857 = AXIS2_PLACEMENT_3D('',#152858,#152859,#152860); +#152858 = CARTESIAN_POINT('',(-6.576,2.058921487204,-2.045192131857)); +#152859 = DIRECTION('',(0.,1.,-1.862044306318E-14)); +#152860 = DIRECTION('',(0.,1.862044306318E-14,1.)); +#152861 = ADVANCED_FACE('',(#152862),#152887,.F.); +#152862 = FACE_BOUND('',#152863,.T.); +#152863 = EDGE_LOOP('',(#152864,#152872,#152880,#152886)); +#152864 = ORIENTED_EDGE('',*,*,#152865,.T.); +#152865 = EDGE_CURVE('',#152835,#152866,#152868,.T.); +#152866 = VERTEX_POINT('',#152867); +#152867 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.045192131857)); +#152868 = LINE('',#152869,#152870); +#152869 = CARTESIAN_POINT('',(-6.575,2.204383619695,-2.045192131857)); +#152870 = VECTOR('',#152871,1.); +#152871 = DIRECTION('',(-0.,1.,-8.944201385657E-15)); +#152872 = ORIENTED_EDGE('',*,*,#152873,.F.); +#152873 = EDGE_CURVE('',#152874,#152866,#152876,.T.); +#152874 = VERTEX_POINT('',#152875); +#152875 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.045192131857)); +#152876 = LINE('',#152877,#152878); +#152877 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.045192131857)); +#152878 = VECTOR('',#152879,1.); +#152879 = DIRECTION('',(1.,-0.,-0.)); +#152880 = ORIENTED_EDGE('',*,*,#152881,.F.); +#152881 = EDGE_CURVE('',#152843,#152874,#152882,.T.); +#152882 = LINE('',#152883,#152884); +#152883 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.045192131857)); +#152884 = VECTOR('',#152885,1.); +#152885 = DIRECTION('',(-0.,1.,-8.944201385657E-15)); +#152886 = ORIENTED_EDGE('',*,*,#152842,.T.); +#152887 = PLANE('',#152888); +#152888 = AXIS2_PLACEMENT_3D('',#152889,#152890,#152891); +#152889 = CARTESIAN_POINT('',(-6.576,2.204383619695,-2.045192131857)); +#152890 = DIRECTION('',(0.,-8.944201385657E-15,-1.)); +#152891 = DIRECTION('',(0.,1.,-8.944201385657E-15)); +#152892 = ADVANCED_FACE('',(#152893),#152918,.F.); +#152893 = FACE_BOUND('',#152894,.T.); +#152894 = EDGE_LOOP('',(#152895,#152903,#152911,#152917)); +#152895 = ORIENTED_EDGE('',*,*,#152896,.T.); +#152896 = EDGE_CURVE('',#152866,#152897,#152899,.T.); +#152897 = VERTEX_POINT('',#152898); +#152898 = CARTESIAN_POINT('',(-6.575,2.204383619695,-1.915014440733)); +#152899 = LINE('',#152900,#152901); +#152900 = CARTESIAN_POINT('',(-6.575,2.204383619695,-1.915014440733)); +#152901 = VECTOR('',#152902,1.); +#152902 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#152903 = ORIENTED_EDGE('',*,*,#152904,.F.); +#152904 = EDGE_CURVE('',#152905,#152897,#152907,.T.); +#152905 = VERTEX_POINT('',#152906); +#152906 = CARTESIAN_POINT('',(-6.576,2.204383619695,-1.915014440733)); +#152907 = LINE('',#152908,#152909); +#152908 = CARTESIAN_POINT('',(-6.576,2.204383619695,-1.915014440733)); +#152909 = VECTOR('',#152910,1.); +#152910 = DIRECTION('',(1.,-0.,-0.)); +#152911 = ORIENTED_EDGE('',*,*,#152912,.F.); +#152912 = EDGE_CURVE('',#152874,#152905,#152913,.T.); +#152913 = LINE('',#152914,#152915); +#152914 = CARTESIAN_POINT('',(-6.576,2.204383619695,-1.915014440733)); +#152915 = VECTOR('',#152916,1.); +#152916 = DIRECTION('',(-0.,9.994359215826E-15,1.)); +#152917 = ORIENTED_EDGE('',*,*,#152873,.T.); +#152918 = PLANE('',#152919); +#152919 = AXIS2_PLACEMENT_3D('',#152920,#152921,#152922); +#152920 = CARTESIAN_POINT('',(-6.576,2.204383619695,-1.915014440733)); +#152921 = DIRECTION('',(0.,1.,-9.994359215826E-15)); +#152922 = DIRECTION('',(0.,9.994359215826E-15,1.)); +#152923 = ADVANCED_FACE('',(#152924),#152949,.F.); +#152924 = FACE_BOUND('',#152925,.T.); +#152925 = EDGE_LOOP('',(#152926,#152934,#152942,#152948)); +#152926 = ORIENTED_EDGE('',*,*,#152927,.T.); +#152927 = EDGE_CURVE('',#152897,#152928,#152930,.T.); +#152928 = VERTEX_POINT('',#152929); +#152929 = CARTESIAN_POINT('',(-6.575,2.047380174333,-1.915014440733)); +#152930 = LINE('',#152931,#152932); +#152931 = CARTESIAN_POINT('',(-6.575,2.047380174333,-1.915014440733)); +#152932 = VECTOR('',#152933,1.); +#152933 = DIRECTION('',(-0.,-1.,1.104895164544E-14)); +#152934 = ORIENTED_EDGE('',*,*,#152935,.F.); +#152935 = EDGE_CURVE('',#152936,#152928,#152938,.T.); +#152936 = VERTEX_POINT('',#152937); +#152937 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.915014440733)); +#152938 = LINE('',#152939,#152940); +#152939 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.915014440733)); +#152940 = VECTOR('',#152941,1.); +#152941 = DIRECTION('',(1.,-0.,-0.)); +#152942 = ORIENTED_EDGE('',*,*,#152943,.F.); +#152943 = EDGE_CURVE('',#152905,#152936,#152944,.T.); +#152944 = LINE('',#152945,#152946); +#152945 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.915014440733)); +#152946 = VECTOR('',#152947,1.); +#152947 = DIRECTION('',(-0.,-1.,1.104895164544E-14)); +#152948 = ORIENTED_EDGE('',*,*,#152904,.T.); +#152949 = PLANE('',#152950); +#152950 = AXIS2_PLACEMENT_3D('',#152951,#152952,#152953); +#152951 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.915014440733)); +#152952 = DIRECTION('',(0.,1.104895164544E-14,1.)); +#152953 = DIRECTION('',(0.,-1.,1.104895164544E-14)); +#152954 = ADVANCED_FACE('',(#152955),#152980,.F.); +#152955 = FACE_BOUND('',#152956,.T.); +#152956 = EDGE_LOOP('',(#152957,#152965,#152973,#152979)); +#152957 = ORIENTED_EDGE('',*,*,#152958,.T.); +#152958 = EDGE_CURVE('',#152928,#152959,#152961,.T.); +#152959 = VERTEX_POINT('',#152960); +#152960 = CARTESIAN_POINT('',(-6.575,2.047380174333,-1.868225334499)); +#152961 = LINE('',#152962,#152963); +#152962 = CARTESIAN_POINT('',(-6.575,2.047380174333,-1.868225334499)); +#152963 = VECTOR('',#152964,1.); +#152964 = DIRECTION('',(-0.,9.268842769273E-15,1.)); +#152965 = ORIENTED_EDGE('',*,*,#152966,.F.); +#152966 = EDGE_CURVE('',#152967,#152959,#152969,.T.); +#152967 = VERTEX_POINT('',#152968); +#152968 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.868225334499)); +#152969 = LINE('',#152970,#152971); +#152970 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.868225334499)); +#152971 = VECTOR('',#152972,1.); +#152972 = DIRECTION('',(1.,-0.,-0.)); +#152973 = ORIENTED_EDGE('',*,*,#152974,.F.); +#152974 = EDGE_CURVE('',#152936,#152967,#152975,.T.); +#152975 = LINE('',#152976,#152977); +#152976 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.868225334499)); +#152977 = VECTOR('',#152978,1.); +#152978 = DIRECTION('',(-0.,9.268842769273E-15,1.)); +#152979 = ORIENTED_EDGE('',*,*,#152935,.T.); +#152980 = PLANE('',#152981); +#152981 = AXIS2_PLACEMENT_3D('',#152982,#152983,#152984); +#152982 = CARTESIAN_POINT('',(-6.576,2.047380174333,-1.868225334499)); +#152983 = DIRECTION('',(0.,1.,-9.268842769273E-15)); +#152984 = DIRECTION('',(0.,9.268842769273E-15,1.)); +#152985 = ADVANCED_FACE('',(#152986),#153011,.F.); +#152986 = FACE_BOUND('',#152987,.T.); +#152987 = EDGE_LOOP('',(#152988,#152996,#153004,#153010)); +#152988 = ORIENTED_EDGE('',*,*,#152989,.T.); +#152989 = EDGE_CURVE('',#152959,#152990,#152992,.T.); +#152990 = VERTEX_POINT('',#152991); +#152991 = CARTESIAN_POINT('',(-6.575,2.25689139447,-1.868225334499)); +#152992 = LINE('',#152993,#152994); +#152993 = CARTESIAN_POINT('',(-6.575,2.25689139447,-1.868225334499)); +#152994 = VECTOR('',#152995,1.); +#152995 = DIRECTION('',(-0.,1.,-1.034982443206E-14)); +#152996 = ORIENTED_EDGE('',*,*,#152997,.F.); +#152997 = EDGE_CURVE('',#152998,#152990,#153000,.T.); +#152998 = VERTEX_POINT('',#152999); +#152999 = CARTESIAN_POINT('',(-6.576,2.25689139447,-1.868225334499)); +#153000 = LINE('',#153001,#153002); +#153001 = CARTESIAN_POINT('',(-6.576,2.25689139447,-1.868225334499)); +#153002 = VECTOR('',#153003,1.); +#153003 = DIRECTION('',(1.,-0.,-0.)); +#153004 = ORIENTED_EDGE('',*,*,#153005,.F.); +#153005 = EDGE_CURVE('',#152967,#152998,#153006,.T.); +#153006 = LINE('',#153007,#153008); +#153007 = CARTESIAN_POINT('',(-6.576,2.25689139447,-1.868225334499)); +#153008 = VECTOR('',#153009,1.); +#153009 = DIRECTION('',(-0.,1.,-1.034982443206E-14)); +#153010 = ORIENTED_EDGE('',*,*,#152966,.T.); +#153011 = PLANE('',#153012); +#153012 = AXIS2_PLACEMENT_3D('',#153013,#153014,#153015); +#153013 = CARTESIAN_POINT('',(-6.576,2.25689139447,-1.868225334499)); +#153014 = DIRECTION('',(0.,-1.034982443206E-14,-1.)); +#153015 = DIRECTION('',(0.,1.,-1.034982443206E-14)); +#153016 = ADVANCED_FACE('',(#153017),#153042,.F.); +#153017 = FACE_BOUND('',#153018,.T.); +#153018 = EDGE_LOOP('',(#153019,#153027,#153035,#153041)); +#153019 = ORIENTED_EDGE('',*,*,#153020,.T.); +#153020 = EDGE_CURVE('',#152990,#153021,#153023,.T.); +#153021 = VERTEX_POINT('',#153022); +#153022 = CARTESIAN_POINT('',(-6.575,2.25689139447,-2.274978631362)); +#153023 = LINE('',#153024,#153025); +#153024 = CARTESIAN_POINT('',(-6.575,2.25689139447,-2.274978631362)); +#153025 = VECTOR('',#153026,1.); +#153026 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#153027 = ORIENTED_EDGE('',*,*,#153028,.F.); +#153028 = EDGE_CURVE('',#153029,#153021,#153031,.T.); +#153029 = VERTEX_POINT('',#153030); +#153030 = CARTESIAN_POINT('',(-6.576,2.25689139447,-2.274978631362)); +#153031 = LINE('',#153032,#153033); +#153032 = CARTESIAN_POINT('',(-6.576,2.25689139447,-2.274978631362)); +#153033 = VECTOR('',#153034,1.); +#153034 = DIRECTION('',(1.,-0.,-0.)); +#153035 = ORIENTED_EDGE('',*,*,#153036,.F.); +#153036 = EDGE_CURVE('',#152998,#153029,#153037,.T.); +#153037 = LINE('',#153038,#153039); +#153038 = CARTESIAN_POINT('',(-6.576,2.25689139447,-2.274978631362)); +#153039 = VECTOR('',#153040,1.); +#153040 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#153041 = ORIENTED_EDGE('',*,*,#152997,.T.); +#153042 = PLANE('',#153043); +#153043 = AXIS2_PLACEMENT_3D('',#153044,#153045,#153046); +#153044 = CARTESIAN_POINT('',(-6.576,2.25689139447,-2.274978631362)); +#153045 = DIRECTION('',(0.,-1.,1.066201238783E-14)); +#153046 = DIRECTION('',(0.,-1.066201238783E-14,-1.)); +#153047 = ADVANCED_FACE('',(#153048),#153064,.F.); +#153048 = FACE_BOUND('',#153049,.T.); +#153049 = EDGE_LOOP('',(#153050,#153056,#153057,#153063)); +#153050 = ORIENTED_EDGE('',*,*,#153051,.T.); +#153051 = EDGE_CURVE('',#153021,#152702,#153052,.T.); +#153052 = LINE('',#153053,#153054); +#153053 = CARTESIAN_POINT('',(-6.575,2.038126328877,-2.274978631362)); +#153054 = VECTOR('',#153055,1.); +#153055 = DIRECTION('',(-0.,-1.,9.912022923267E-15)); +#153056 = ORIENTED_EDGE('',*,*,#152727,.F.); +#153057 = ORIENTED_EDGE('',*,*,#153058,.F.); +#153058 = EDGE_CURVE('',#153029,#152720,#153059,.T.); +#153059 = LINE('',#153060,#153061); +#153060 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.274978631362)); +#153061 = VECTOR('',#153062,1.); +#153062 = DIRECTION('',(-0.,-1.,9.912022923267E-15)); +#153063 = ORIENTED_EDGE('',*,*,#153028,.T.); +#153064 = PLANE('',#153065); +#153065 = AXIS2_PLACEMENT_3D('',#153066,#153067,#153068); +#153066 = CARTESIAN_POINT('',(-6.576,2.038126328877,-2.274978631362)); +#153067 = DIRECTION('',(0.,9.912022923267E-15,1.)); +#153068 = DIRECTION('',(0.,-1.,9.912022923267E-15)); +#153069 = ADVANCED_FACE('',(#153070),#153084,.F.); +#153070 = FACE_BOUND('',#153071,.T.); +#153071 = EDGE_LOOP('',(#153072,#153073,#153074,#153075,#153076,#153077, + #153078,#153079,#153080,#153081,#153082,#153083)); +#153072 = ORIENTED_EDGE('',*,*,#152719,.T.); +#153073 = ORIENTED_EDGE('',*,*,#152757,.T.); +#153074 = ORIENTED_EDGE('',*,*,#152788,.T.); +#153075 = ORIENTED_EDGE('',*,*,#152819,.T.); +#153076 = ORIENTED_EDGE('',*,*,#152850,.T.); +#153077 = ORIENTED_EDGE('',*,*,#152881,.T.); +#153078 = ORIENTED_EDGE('',*,*,#152912,.T.); +#153079 = ORIENTED_EDGE('',*,*,#152943,.T.); +#153080 = ORIENTED_EDGE('',*,*,#152974,.T.); +#153081 = ORIENTED_EDGE('',*,*,#153005,.T.); +#153082 = ORIENTED_EDGE('',*,*,#153036,.T.); +#153083 = ORIENTED_EDGE('',*,*,#153058,.T.); +#153084 = PLANE('',#153085); +#153085 = AXIS2_PLACEMENT_3D('',#153086,#153087,#153088); +#153086 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#153087 = DIRECTION('',(1.,0.,0.)); +#153088 = DIRECTION('',(0.,0.,-1.)); +#153089 = ADVANCED_FACE('',(#153090),#153104,.T.); +#153090 = FACE_BOUND('',#153091,.T.); +#153091 = EDGE_LOOP('',(#153092,#153093,#153094,#153095,#153096,#153097, + #153098,#153099,#153100,#153101,#153102,#153103)); +#153092 = ORIENTED_EDGE('',*,*,#152701,.F.); +#153093 = ORIENTED_EDGE('',*,*,#153051,.F.); +#153094 = ORIENTED_EDGE('',*,*,#153020,.F.); +#153095 = ORIENTED_EDGE('',*,*,#152989,.F.); +#153096 = ORIENTED_EDGE('',*,*,#152958,.F.); +#153097 = ORIENTED_EDGE('',*,*,#152927,.F.); +#153098 = ORIENTED_EDGE('',*,*,#152896,.F.); +#153099 = ORIENTED_EDGE('',*,*,#152865,.F.); +#153100 = ORIENTED_EDGE('',*,*,#152834,.F.); +#153101 = ORIENTED_EDGE('',*,*,#152803,.F.); +#153102 = ORIENTED_EDGE('',*,*,#152772,.F.); +#153103 = ORIENTED_EDGE('',*,*,#152741,.F.); +#153104 = PLANE('',#153105); +#153105 = AXIS2_PLACEMENT_3D('',#153106,#153107,#153108); +#153106 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#153107 = DIRECTION('',(1.,0.,0.)); +#153108 = DIRECTION('',(0.,0.,-1.)); +#153109 = MANIFOLD_SOLID_BREP('',#153110); +#153110 = CLOSED_SHELL('',(#153111,#153241,#153371,#153393,#153414, + #153435,#153456,#153477,#153494,#153506,#153528,#153545,#153562, + #153583,#153604,#153625)); +#153111 = ADVANCED_FACE('',(#153112,#153174),#153236,.T.); +#153112 = FACE_BOUND('',#153113,.T.); +#153113 = EDGE_LOOP('',(#153114,#153124,#153133,#153142,#153151,#153160, + #153168)); +#153114 = ORIENTED_EDGE('',*,*,#153115,.T.); +#153115 = EDGE_CURVE('',#153116,#153118,#153120,.T.); +#153116 = VERTEX_POINT('',#153117); +#153117 = CARTESIAN_POINT('',(-6.576,1.96128821886,-2.274978631362)); +#153118 = VERTEX_POINT('',#153119); +#153119 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153120 = LINE('',#153121,#153122); +#153121 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153122 = VECTOR('',#153123,1.); +#153123 = DIRECTION('',(-0.,-1.,1.162912429214E-14)); +#153124 = ORIENTED_EDGE('',*,*,#153125,.T.); +#153125 = EDGE_CURVE('',#153118,#153126,#153128,.T.); +#153126 = VERTEX_POINT('',#153127); +#153127 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153128 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153129,#153130,#153131, + #153132),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#153129 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153130 = CARTESIAN_POINT('',(-6.576,1.785049252045,-2.274978631362)); +#153131 = CARTESIAN_POINT('',(-6.576,1.732333525687,-2.256055037287)); +#153132 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153133 = ORIENTED_EDGE('',*,*,#153134,.T.); +#153134 = EDGE_CURVE('',#153126,#153135,#153137,.T.); +#153135 = VERTEX_POINT('',#153136); +#153136 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153137 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153138,#153139,#153140, + #153141),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#153138 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153139 = CARTESIAN_POINT('',(-6.576,1.650608553466,-2.179944757811)); +#153140 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.12941252308)); +#153141 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153142 = ORIENTED_EDGE('',*,*,#153143,.T.); +#153143 = EDGE_CURVE('',#153135,#153144,#153146,.T.); +#153144 = VERTEX_POINT('',#153145); +#153145 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153146 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153147,#153148,#153149, + #153150),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153147 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153148 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.006097234204)); +#153149 = CARTESIAN_POINT('',(-6.576,1.650608553466,-1.958060418469)); +#153150 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153151 = ORIENTED_EDGE('',*,*,#153152,.T.); +#153152 = EDGE_CURVE('',#153144,#153153,#153155,.T.); +#153153 = VERTEX_POINT('',#153154); +#153154 = CARTESIAN_POINT('',(-6.576,1.845251235401,-1.868225334499)); +#153155 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153156,#153157,#153158, + #153159),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#153156 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153157 = CARTESIAN_POINT('',(-6.576,1.732333525687,-1.886109170662)); +#153158 = CARTESIAN_POINT('',(-6.576,1.783593590964,-1.868225334499)); +#153159 = CARTESIAN_POINT('',(-6.576,1.845251235401,-1.868225334499)); +#153160 = ORIENTED_EDGE('',*,*,#153161,.T.); +#153161 = EDGE_CURVE('',#153153,#153162,#153164,.T.); +#153162 = VERTEX_POINT('',#153163); +#153163 = CARTESIAN_POINT('',(-6.576,1.96128821886,-1.868225334499)); +#153164 = LINE('',#153165,#153166); +#153165 = CARTESIAN_POINT('',(-6.576,1.96128821886,-1.868225334499)); +#153166 = VECTOR('',#153167,1.); +#153167 = DIRECTION('',(-0.,1.,-1.121230980157E-14)); +#153168 = ORIENTED_EDGE('',*,*,#153169,.T.); +#153169 = EDGE_CURVE('',#153162,#153116,#153170,.T.); +#153170 = LINE('',#153171,#153172); +#153171 = CARTESIAN_POINT('',(-6.576,1.96128821886,-2.274978631362)); +#153172 = VECTOR('',#153173,1.); +#153173 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#153174 = FACE_BOUND('',#153175,.T.); +#153175 = EDGE_LOOP('',(#153176,#153186,#153194,#153203,#153212,#153221, + #153230)); +#153176 = ORIENTED_EDGE('',*,*,#153177,.F.); +#153177 = EDGE_CURVE('',#153178,#153180,#153182,.T.); +#153178 = VERTEX_POINT('',#153179); +#153179 = CARTESIAN_POINT('',(-6.576,1.908780444087,-1.915014440733)); +#153180 = VERTEX_POINT('',#153181); +#153181 = CARTESIAN_POINT('',(-6.576,1.908780444087,-2.228605428294)); +#153182 = LINE('',#153183,#153184); +#153183 = CARTESIAN_POINT('',(-6.576,1.908780444087,-1.915014440733)); +#153184 = VECTOR('',#153185,1.); +#153185 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#153186 = ORIENTED_EDGE('',*,*,#153187,.F.); +#153187 = EDGE_CURVE('',#153188,#153178,#153190,.T.); +#153188 = VERTEX_POINT('',#153189); +#153189 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153190 = LINE('',#153191,#153192); +#153191 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153192 = VECTOR('',#153193,1.); +#153193 = DIRECTION('',(0.,1.,-1.058624174153E-14)); +#153194 = ORIENTED_EDGE('',*,*,#153195,.F.); +#153195 = EDGE_CURVE('',#153196,#153188,#153198,.T.); +#153196 = VERTEX_POINT('',#153197); +#153197 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153198 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153199,#153200,#153201, + #153202),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#153199 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153200 = CARTESIAN_POINT('',(-6.576,1.759679158888,-1.927699487314)); +#153201 = CARTESIAN_POINT('',(-6.576,1.798878032333,-1.915014440733)); +#153202 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153203 = ORIENTED_EDGE('',*,*,#153204,.F.); +#153204 = EDGE_CURVE('',#153205,#153196,#153207,.T.); +#153205 = VERTEX_POINT('',#153206); +#153206 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153207 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153208,#153209,#153210, + #153211),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#153208 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153209 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.017118668115)); +#153210 = CARTESIAN_POINT('',(-6.576,1.700205006076,-1.978855576797)); +#153211 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153212 = ORIENTED_EDGE('',*,*,#153213,.F.); +#153213 = EDGE_CURVE('',#153214,#153205,#153216,.T.); +#153214 = VERTEX_POINT('',#153215); +#153215 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153216 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153217,#153218,#153219, + #153220),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153217 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153218 = CARTESIAN_POINT('',(-6.576,1.699789102907,-2.158109841568)); +#153219 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.118599040749)); +#153220 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153221 = ORIENTED_EDGE('',*,*,#153222,.F.); +#153222 = EDGE_CURVE('',#153223,#153214,#153225,.T.); +#153223 = VERTEX_POINT('',#153224); +#153224 = CARTESIAN_POINT('',(-6.576,1.849722194441,-2.228605428294)); +#153225 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153226,#153227,#153228, + #153229),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#153226 = CARTESIAN_POINT('',(-6.576,1.849722194441,-2.228605428294)); +#153227 = CARTESIAN_POINT('',(-6.576,1.798046226001,-2.228605428294)); +#153228 = CARTESIAN_POINT('',(-6.576,1.757703618847,-2.214464720635)); +#153229 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153230 = ORIENTED_EDGE('',*,*,#153231,.F.); +#153231 = EDGE_CURVE('',#153180,#153223,#153232,.T.); +#153232 = LINE('',#153233,#153234); +#153233 = CARTESIAN_POINT('',(-6.576,1.908780444087,-2.228605428294)); +#153234 = VECTOR('',#153235,1.); +#153235 = DIRECTION('',(0.,-1.,1.468654664144E-14)); +#153236 = PLANE('',#153237); +#153237 = AXIS2_PLACEMENT_3D('',#153238,#153239,#153240); +#153238 = CARTESIAN_POINT('',(-6.576,1.760562953117,-1.881664205568)); +#153239 = DIRECTION('',(-1.,-0.,0.)); +#153240 = DIRECTION('',(0.,0.,1.)); +#153241 = ADVANCED_FACE('',(#153242,#153304),#153366,.F.); +#153242 = FACE_BOUND('',#153243,.T.); +#153243 = EDGE_LOOP('',(#153244,#153254,#153262,#153270,#153279,#153288, + #153297)); +#153244 = ORIENTED_EDGE('',*,*,#153245,.F.); +#153245 = EDGE_CURVE('',#153246,#153248,#153250,.T.); +#153246 = VERTEX_POINT('',#153247); +#153247 = CARTESIAN_POINT('',(-6.575,1.96128821886,-2.274978631362)); +#153248 = VERTEX_POINT('',#153249); +#153249 = CARTESIAN_POINT('',(-6.575,1.849410267064,-2.274978631362)); +#153250 = LINE('',#153251,#153252); +#153251 = CARTESIAN_POINT('',(-6.575,1.849410267064,-2.274978631362)); +#153252 = VECTOR('',#153253,1.); +#153253 = DIRECTION('',(-0.,-1.,1.162912429214E-14)); +#153254 = ORIENTED_EDGE('',*,*,#153255,.F.); +#153255 = EDGE_CURVE('',#153256,#153246,#153258,.T.); +#153256 = VERTEX_POINT('',#153257); +#153257 = CARTESIAN_POINT('',(-6.575,1.96128821886,-1.868225334499)); +#153258 = LINE('',#153259,#153260); +#153259 = CARTESIAN_POINT('',(-6.575,1.96128821886,-2.274978631362)); +#153260 = VECTOR('',#153261,1.); +#153261 = DIRECTION('',(-0.,-1.066201238783E-14,-1.)); +#153262 = ORIENTED_EDGE('',*,*,#153263,.F.); +#153263 = EDGE_CURVE('',#153264,#153256,#153266,.T.); +#153264 = VERTEX_POINT('',#153265); +#153265 = CARTESIAN_POINT('',(-6.575,1.845251235401,-1.868225334499)); +#153266 = LINE('',#153267,#153268); +#153267 = CARTESIAN_POINT('',(-6.575,1.96128821886,-1.868225334499)); +#153268 = VECTOR('',#153269,1.); +#153269 = DIRECTION('',(-0.,1.,-1.121230980157E-14)); +#153270 = ORIENTED_EDGE('',*,*,#153271,.F.); +#153271 = EDGE_CURVE('',#153272,#153264,#153274,.T.); +#153272 = VERTEX_POINT('',#153273); +#153273 = CARTESIAN_POINT('',(-6.575,1.691471039578,-1.922084794564)); +#153274 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153275,#153276,#153277, + #153278),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#153275 = CARTESIAN_POINT('',(-6.575,1.691471039578,-1.922084794564)); +#153276 = CARTESIAN_POINT('',(-6.575,1.732333525687,-1.886109170662)); +#153277 = CARTESIAN_POINT('',(-6.575,1.783593590964,-1.868225334499)); +#153278 = CARTESIAN_POINT('',(-6.575,1.845251235401,-1.868225334499)); +#153279 = ORIENTED_EDGE('',*,*,#153280,.F.); +#153280 = EDGE_CURVE('',#153281,#153272,#153283,.T.); +#153281 = VERTEX_POINT('',#153282); +#153282 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.066403193351)); +#153283 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153284,#153285,#153286, + #153287),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153284 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.066403193351)); +#153285 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.006097234204)); +#153286 = CARTESIAN_POINT('',(-6.575,1.650608553466,-1.958060418469)); +#153287 = CARTESIAN_POINT('',(-6.575,1.691471039578,-1.922084794564)); +#153288 = ORIENTED_EDGE('',*,*,#153289,.F.); +#153289 = EDGE_CURVE('',#153290,#153281,#153292,.T.); +#153290 = VERTEX_POINT('',#153291); +#153291 = CARTESIAN_POINT('',(-6.575,1.691471039578,-2.217999897549)); +#153292 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153293,#153294,#153295, + #153296),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#153293 = CARTESIAN_POINT('',(-6.575,1.691471039578,-2.217999897549)); +#153294 = CARTESIAN_POINT('',(-6.575,1.650608553466,-2.179944757811)); +#153295 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.12941252308)); +#153296 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.066403193351)); +#153297 = ORIENTED_EDGE('',*,*,#153298,.F.); +#153298 = EDGE_CURVE('',#153248,#153290,#153299,.T.); +#153299 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153300,#153301,#153302, + #153303),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#153300 = CARTESIAN_POINT('',(-6.575,1.849410267064,-2.274978631362)); +#153301 = CARTESIAN_POINT('',(-6.575,1.785049252045,-2.274978631362)); +#153302 = CARTESIAN_POINT('',(-6.575,1.732333525687,-2.256055037287)); +#153303 = CARTESIAN_POINT('',(-6.575,1.691471039578,-2.217999897549)); +#153304 = FACE_BOUND('',#153305,.T.); +#153305 = EDGE_LOOP('',(#153306,#153316,#153324,#153332,#153341,#153350, + #153359)); +#153306 = ORIENTED_EDGE('',*,*,#153307,.T.); +#153307 = EDGE_CURVE('',#153308,#153310,#153312,.T.); +#153308 = VERTEX_POINT('',#153309); +#153309 = CARTESIAN_POINT('',(-6.575,1.847330751234,-1.915014440733)); +#153310 = VERTEX_POINT('',#153311); +#153311 = CARTESIAN_POINT('',(-6.575,1.908780444087,-1.915014440733)); +#153312 = LINE('',#153313,#153314); +#153313 = CARTESIAN_POINT('',(-6.575,1.847330751234,-1.915014440733)); +#153314 = VECTOR('',#153315,1.); +#153315 = DIRECTION('',(0.,1.,-1.058624174153E-14)); +#153316 = ORIENTED_EDGE('',*,*,#153317,.T.); +#153317 = EDGE_CURVE('',#153310,#153318,#153320,.T.); +#153318 = VERTEX_POINT('',#153319); +#153319 = CARTESIAN_POINT('',(-6.575,1.908780444087,-2.228605428294)); +#153320 = LINE('',#153321,#153322); +#153321 = CARTESIAN_POINT('',(-6.575,1.908780444087,-1.915014440733)); +#153322 = VECTOR('',#153323,1.); +#153323 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#153324 = ORIENTED_EDGE('',*,*,#153325,.T.); +#153325 = EDGE_CURVE('',#153318,#153326,#153328,.T.); +#153326 = VERTEX_POINT('',#153327); +#153327 = CARTESIAN_POINT('',(-6.575,1.849722194441,-2.228605428294)); +#153328 = LINE('',#153329,#153330); +#153329 = CARTESIAN_POINT('',(-6.575,1.908780444087,-2.228605428294)); +#153330 = VECTOR('',#153331,1.); +#153331 = DIRECTION('',(0.,-1.,1.468654664144E-14)); +#153332 = ORIENTED_EDGE('',*,*,#153333,.T.); +#153333 = EDGE_CURVE('',#153326,#153334,#153336,.T.); +#153334 = VERTEX_POINT('',#153335); +#153335 = CARTESIAN_POINT('',(-6.575,1.728798348773,-2.18618330531)); +#153336 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153337,#153338,#153339, + #153340),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#153337 = CARTESIAN_POINT('',(-6.575,1.849722194441,-2.228605428294)); +#153338 = CARTESIAN_POINT('',(-6.575,1.798046226001,-2.228605428294)); +#153339 = CARTESIAN_POINT('',(-6.575,1.757703618847,-2.214464720635)); +#153340 = CARTESIAN_POINT('',(-6.575,1.728798348773,-2.18618330531)); +#153341 = ORIENTED_EDGE('',*,*,#153342,.T.); +#153342 = EDGE_CURVE('',#153334,#153343,#153345,.T.); +#153343 = VERTEX_POINT('',#153344); +#153344 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.067858854432)); +#153345 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153346,#153347,#153348, + #153349),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153346 = CARTESIAN_POINT('',(-6.575,1.728798348773,-2.18618330531)); +#153347 = CARTESIAN_POINT('',(-6.575,1.699789102907,-2.158109841568)); +#153348 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.118599040749)); +#153349 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.067858854432)); +#153350 = ORIENTED_EDGE('',*,*,#153351,.T.); +#153351 = EDGE_CURVE('',#153343,#153352,#153354,.T.); +#153352 = VERTEX_POINT('',#153353); +#153353 = CARTESIAN_POINT('',(-6.575,1.729942082482,-1.953277532054)); +#153354 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153355,#153356,#153357, + #153358),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#153355 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.067858854432)); +#153356 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.017118668115)); +#153357 = CARTESIAN_POINT('',(-6.575,1.700205006076,-1.978855576797)); +#153358 = CARTESIAN_POINT('',(-6.575,1.729942082482,-1.953277532054)); +#153359 = ORIENTED_EDGE('',*,*,#153360,.T.); +#153360 = EDGE_CURVE('',#153352,#153308,#153361,.T.); +#153361 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153362,#153363,#153364, + #153365),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#153362 = CARTESIAN_POINT('',(-6.575,1.729942082482,-1.953277532054)); +#153363 = CARTESIAN_POINT('',(-6.575,1.759679158888,-1.927699487314)); +#153364 = CARTESIAN_POINT('',(-6.575,1.798878032333,-1.915014440733)); +#153365 = CARTESIAN_POINT('',(-6.575,1.847330751234,-1.915014440733)); +#153366 = PLANE('',#153367); +#153367 = AXIS2_PLACEMENT_3D('',#153368,#153369,#153370); +#153368 = CARTESIAN_POINT('',(-6.575,1.760562953117,-1.881664205568)); +#153369 = DIRECTION('',(-1.,-0.,0.)); +#153370 = DIRECTION('',(0.,0.,1.)); +#153371 = ADVANCED_FACE('',(#153372),#153388,.F.); +#153372 = FACE_BOUND('',#153373,.T.); +#153373 = EDGE_LOOP('',(#153374,#153375,#153381,#153382)); +#153374 = ORIENTED_EDGE('',*,*,#153245,.T.); +#153375 = ORIENTED_EDGE('',*,*,#153376,.F.); +#153376 = EDGE_CURVE('',#153118,#153248,#153377,.T.); +#153377 = LINE('',#153378,#153379); +#153378 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153379 = VECTOR('',#153380,1.); +#153380 = DIRECTION('',(1.,-0.,-0.)); +#153381 = ORIENTED_EDGE('',*,*,#153115,.F.); +#153382 = ORIENTED_EDGE('',*,*,#153383,.T.); +#153383 = EDGE_CURVE('',#153116,#153246,#153384,.T.); +#153384 = LINE('',#153385,#153386); +#153385 = CARTESIAN_POINT('',(-6.576,1.96128821886,-2.274978631362)); +#153386 = VECTOR('',#153387,1.); +#153387 = DIRECTION('',(1.,-0.,-0.)); +#153388 = PLANE('',#153389); +#153389 = AXIS2_PLACEMENT_3D('',#153390,#153391,#153392); +#153390 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153391 = DIRECTION('',(0.,1.162912429214E-14,1.)); +#153392 = DIRECTION('',(0.,-1.,1.162912429214E-14)); +#153393 = ADVANCED_FACE('',(#153394),#153405,.F.); +#153394 = FACE_BOUND('',#153395,.F.); +#153395 = EDGE_LOOP('',(#153396,#153397,#153398,#153404)); +#153396 = ORIENTED_EDGE('',*,*,#153376,.F.); +#153397 = ORIENTED_EDGE('',*,*,#153125,.T.); +#153398 = ORIENTED_EDGE('',*,*,#153399,.T.); +#153399 = EDGE_CURVE('',#153126,#153290,#153400,.T.); +#153400 = LINE('',#153401,#153402); +#153401 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153402 = VECTOR('',#153403,1.); +#153403 = DIRECTION('',(1.,-0.,-0.)); +#153404 = ORIENTED_EDGE('',*,*,#153298,.F.); +#153405 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153406,#153407) + ,(#153408,#153409) + ,(#153410,#153411) + ,(#153412,#153413 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153406 = CARTESIAN_POINT('',(-6.576,1.849410267064,-2.274978631362)); +#153407 = CARTESIAN_POINT('',(-6.575,1.849410267064,-2.274978631362)); +#153408 = CARTESIAN_POINT('',(-6.576,1.785049252045,-2.274978631362)); +#153409 = CARTESIAN_POINT('',(-6.575,1.785049252045,-2.274978631362)); +#153410 = CARTESIAN_POINT('',(-6.576,1.732333525687,-2.256055037287)); +#153411 = CARTESIAN_POINT('',(-6.575,1.732333525687,-2.256055037287)); +#153412 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153413 = CARTESIAN_POINT('',(-6.575,1.691471039578,-2.217999897549)); +#153414 = ADVANCED_FACE('',(#153415),#153426,.F.); +#153415 = FACE_BOUND('',#153416,.F.); +#153416 = EDGE_LOOP('',(#153417,#153418,#153419,#153425)); +#153417 = ORIENTED_EDGE('',*,*,#153399,.F.); +#153418 = ORIENTED_EDGE('',*,*,#153134,.T.); +#153419 = ORIENTED_EDGE('',*,*,#153420,.T.); +#153420 = EDGE_CURVE('',#153135,#153281,#153421,.T.); +#153421 = LINE('',#153422,#153423); +#153422 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153423 = VECTOR('',#153424,1.); +#153424 = DIRECTION('',(1.,-0.,-0.)); +#153425 = ORIENTED_EDGE('',*,*,#153289,.F.); +#153426 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153427,#153428) + ,(#153429,#153430) + ,(#153431,#153432) + ,(#153433,#153434 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153427 = CARTESIAN_POINT('',(-6.576,1.691471039578,-2.217999897549)); +#153428 = CARTESIAN_POINT('',(-6.575,1.691471039578,-2.217999897549)); +#153429 = CARTESIAN_POINT('',(-6.576,1.650608553466,-2.179944757811)); +#153430 = CARTESIAN_POINT('',(-6.575,1.650608553466,-2.179944757811)); +#153431 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.12941252308)); +#153432 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.12941252308)); +#153433 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153434 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.066403193351)); +#153435 = ADVANCED_FACE('',(#153436),#153447,.F.); +#153436 = FACE_BOUND('',#153437,.F.); +#153437 = EDGE_LOOP('',(#153438,#153439,#153440,#153446)); +#153438 = ORIENTED_EDGE('',*,*,#153420,.F.); +#153439 = ORIENTED_EDGE('',*,*,#153143,.T.); +#153440 = ORIENTED_EDGE('',*,*,#153441,.T.); +#153441 = EDGE_CURVE('',#153144,#153272,#153442,.T.); +#153442 = LINE('',#153443,#153444); +#153443 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153444 = VECTOR('',#153445,1.); +#153445 = DIRECTION('',(1.,-0.,-0.)); +#153446 = ORIENTED_EDGE('',*,*,#153280,.F.); +#153447 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153448,#153449) + ,(#153450,#153451) + ,(#153452,#153453) + ,(#153454,#153455 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153448 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.066403193351)); +#153449 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.066403193351)); +#153450 = CARTESIAN_POINT('',(-6.576,1.630125322513,-2.006097234204)); +#153451 = CARTESIAN_POINT('',(-6.575,1.630125322513,-2.006097234204)); +#153452 = CARTESIAN_POINT('',(-6.576,1.650608553466,-1.958060418469)); +#153453 = CARTESIAN_POINT('',(-6.575,1.650608553466,-1.958060418469)); +#153454 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153455 = CARTESIAN_POINT('',(-6.575,1.691471039578,-1.922084794564)); +#153456 = ADVANCED_FACE('',(#153457),#153468,.F.); +#153457 = FACE_BOUND('',#153458,.F.); +#153458 = EDGE_LOOP('',(#153459,#153460,#153461,#153467)); +#153459 = ORIENTED_EDGE('',*,*,#153441,.F.); +#153460 = ORIENTED_EDGE('',*,*,#153152,.T.); +#153461 = ORIENTED_EDGE('',*,*,#153462,.T.); +#153462 = EDGE_CURVE('',#153153,#153264,#153463,.T.); +#153463 = LINE('',#153464,#153465); +#153464 = CARTESIAN_POINT('',(-6.576,1.845251235401,-1.868225334499)); +#153465 = VECTOR('',#153466,1.); +#153466 = DIRECTION('',(1.,-0.,-0.)); +#153467 = ORIENTED_EDGE('',*,*,#153271,.F.); +#153468 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153469,#153470) + ,(#153471,#153472) + ,(#153473,#153474) + ,(#153475,#153476 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153469 = CARTESIAN_POINT('',(-6.576,1.691471039578,-1.922084794564)); +#153470 = CARTESIAN_POINT('',(-6.575,1.691471039578,-1.922084794564)); +#153471 = CARTESIAN_POINT('',(-6.576,1.732333525687,-1.886109170662)); +#153472 = CARTESIAN_POINT('',(-6.575,1.732333525687,-1.886109170662)); +#153473 = CARTESIAN_POINT('',(-6.576,1.783593590964,-1.868225334499)); +#153474 = CARTESIAN_POINT('',(-6.575,1.783593590964,-1.868225334499)); +#153475 = CARTESIAN_POINT('',(-6.576,1.845251235401,-1.868225334499)); +#153476 = CARTESIAN_POINT('',(-6.575,1.845251235401,-1.868225334499)); +#153477 = ADVANCED_FACE('',(#153478),#153489,.F.); +#153478 = FACE_BOUND('',#153479,.T.); +#153479 = EDGE_LOOP('',(#153480,#153481,#153487,#153488)); +#153480 = ORIENTED_EDGE('',*,*,#153263,.T.); +#153481 = ORIENTED_EDGE('',*,*,#153482,.F.); +#153482 = EDGE_CURVE('',#153162,#153256,#153483,.T.); +#153483 = LINE('',#153484,#153485); +#153484 = CARTESIAN_POINT('',(-6.576,1.96128821886,-1.868225334499)); +#153485 = VECTOR('',#153486,1.); +#153486 = DIRECTION('',(1.,-0.,-0.)); +#153487 = ORIENTED_EDGE('',*,*,#153161,.F.); +#153488 = ORIENTED_EDGE('',*,*,#153462,.T.); +#153489 = PLANE('',#153490); +#153490 = AXIS2_PLACEMENT_3D('',#153491,#153492,#153493); +#153491 = CARTESIAN_POINT('',(-6.576,1.96128821886,-1.868225334499)); +#153492 = DIRECTION('',(0.,-1.121230980157E-14,-1.)); +#153493 = DIRECTION('',(0.,1.,-1.121230980157E-14)); +#153494 = ADVANCED_FACE('',(#153495),#153501,.F.); +#153495 = FACE_BOUND('',#153496,.T.); +#153496 = EDGE_LOOP('',(#153497,#153498,#153499,#153500)); +#153497 = ORIENTED_EDGE('',*,*,#153255,.T.); +#153498 = ORIENTED_EDGE('',*,*,#153383,.F.); +#153499 = ORIENTED_EDGE('',*,*,#153169,.F.); +#153500 = ORIENTED_EDGE('',*,*,#153482,.T.); +#153501 = PLANE('',#153502); +#153502 = AXIS2_PLACEMENT_3D('',#153503,#153504,#153505); +#153503 = CARTESIAN_POINT('',(-6.576,1.96128821886,-2.274978631362)); +#153504 = DIRECTION('',(0.,-1.,1.066201238783E-14)); +#153505 = DIRECTION('',(0.,-1.066201238783E-14,-1.)); +#153506 = ADVANCED_FACE('',(#153507),#153523,.T.); +#153507 = FACE_BOUND('',#153508,.T.); +#153508 = EDGE_LOOP('',(#153509,#153510,#153516,#153517)); +#153509 = ORIENTED_EDGE('',*,*,#153307,.F.); +#153510 = ORIENTED_EDGE('',*,*,#153511,.F.); +#153511 = EDGE_CURVE('',#153188,#153308,#153512,.T.); +#153512 = LINE('',#153513,#153514); +#153513 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153514 = VECTOR('',#153515,1.); +#153515 = DIRECTION('',(1.,-0.,-0.)); +#153516 = ORIENTED_EDGE('',*,*,#153187,.T.); +#153517 = ORIENTED_EDGE('',*,*,#153518,.T.); +#153518 = EDGE_CURVE('',#153178,#153310,#153519,.T.); +#153519 = LINE('',#153520,#153521); +#153520 = CARTESIAN_POINT('',(-6.576,1.908780444087,-1.915014440733)); +#153521 = VECTOR('',#153522,1.); +#153522 = DIRECTION('',(1.,-0.,-0.)); +#153523 = PLANE('',#153524); +#153524 = AXIS2_PLACEMENT_3D('',#153525,#153526,#153527); +#153525 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153526 = DIRECTION('',(0.,-1.058624174153E-14,-1.)); +#153527 = DIRECTION('',(0.,1.,-1.058624174153E-14)); +#153528 = ADVANCED_FACE('',(#153529),#153540,.T.); +#153529 = FACE_BOUND('',#153530,.T.); +#153530 = EDGE_LOOP('',(#153531,#153532,#153533,#153534)); +#153531 = ORIENTED_EDGE('',*,*,#153317,.F.); +#153532 = ORIENTED_EDGE('',*,*,#153518,.F.); +#153533 = ORIENTED_EDGE('',*,*,#153177,.T.); +#153534 = ORIENTED_EDGE('',*,*,#153535,.T.); +#153535 = EDGE_CURVE('',#153180,#153318,#153536,.T.); +#153536 = LINE('',#153537,#153538); +#153537 = CARTESIAN_POINT('',(-6.576,1.908780444087,-2.228605428294)); +#153538 = VECTOR('',#153539,1.); +#153539 = DIRECTION('',(1.,-0.,-0.)); +#153540 = PLANE('',#153541); +#153541 = AXIS2_PLACEMENT_3D('',#153542,#153543,#153544); +#153542 = CARTESIAN_POINT('',(-6.576,1.908780444087,-1.915014440733)); +#153543 = DIRECTION('',(0.,-1.,1.106360542735E-14)); +#153544 = DIRECTION('',(0.,-1.106360542735E-14,-1.)); +#153545 = ADVANCED_FACE('',(#153546),#153557,.T.); +#153546 = FACE_BOUND('',#153547,.T.); +#153547 = EDGE_LOOP('',(#153548,#153549,#153550,#153551)); +#153548 = ORIENTED_EDGE('',*,*,#153325,.F.); +#153549 = ORIENTED_EDGE('',*,*,#153535,.F.); +#153550 = ORIENTED_EDGE('',*,*,#153231,.T.); +#153551 = ORIENTED_EDGE('',*,*,#153552,.T.); +#153552 = EDGE_CURVE('',#153223,#153326,#153553,.T.); +#153553 = LINE('',#153554,#153555); +#153554 = CARTESIAN_POINT('',(-6.576,1.849722194441,-2.228605428294)); +#153555 = VECTOR('',#153556,1.); +#153556 = DIRECTION('',(1.,-0.,-0.)); +#153557 = PLANE('',#153558); +#153558 = AXIS2_PLACEMENT_3D('',#153559,#153560,#153561); +#153559 = CARTESIAN_POINT('',(-6.576,1.908780444087,-2.228605428294)); +#153560 = DIRECTION('',(0.,1.468654664144E-14,1.)); +#153561 = DIRECTION('',(0.,-1.,1.468654664144E-14)); +#153562 = ADVANCED_FACE('',(#153563),#153574,.T.); +#153563 = FACE_BOUND('',#153564,.T.); +#153564 = EDGE_LOOP('',(#153565,#153566,#153567,#153568)); +#153565 = ORIENTED_EDGE('',*,*,#153333,.F.); +#153566 = ORIENTED_EDGE('',*,*,#153552,.F.); +#153567 = ORIENTED_EDGE('',*,*,#153222,.T.); +#153568 = ORIENTED_EDGE('',*,*,#153569,.T.); +#153569 = EDGE_CURVE('',#153214,#153334,#153570,.T.); +#153570 = LINE('',#153571,#153572); +#153571 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153572 = VECTOR('',#153573,1.); +#153573 = DIRECTION('',(1.,-0.,-0.)); +#153574 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153575,#153576) + ,(#153577,#153578) + ,(#153579,#153580) + ,(#153581,#153582 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153575 = CARTESIAN_POINT('',(-6.576,1.849722194441,-2.228605428294)); +#153576 = CARTESIAN_POINT('',(-6.575,1.849722194441,-2.228605428294)); +#153577 = CARTESIAN_POINT('',(-6.576,1.798046226001,-2.228605428294)); +#153578 = CARTESIAN_POINT('',(-6.575,1.798046226001,-2.228605428294)); +#153579 = CARTESIAN_POINT('',(-6.576,1.757703618847,-2.214464720635)); +#153580 = CARTESIAN_POINT('',(-6.575,1.757703618847,-2.214464720635)); +#153581 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153582 = CARTESIAN_POINT('',(-6.575,1.728798348773,-2.18618330531)); +#153583 = ADVANCED_FACE('',(#153584),#153595,.T.); +#153584 = FACE_BOUND('',#153585,.T.); +#153585 = EDGE_LOOP('',(#153586,#153587,#153588,#153589)); +#153586 = ORIENTED_EDGE('',*,*,#153342,.F.); +#153587 = ORIENTED_EDGE('',*,*,#153569,.F.); +#153588 = ORIENTED_EDGE('',*,*,#153213,.T.); +#153589 = ORIENTED_EDGE('',*,*,#153590,.T.); +#153590 = EDGE_CURVE('',#153205,#153343,#153591,.T.); +#153591 = LINE('',#153592,#153593); +#153592 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153593 = VECTOR('',#153594,1.); +#153594 = DIRECTION('',(1.,-0.,-0.)); +#153595 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153596,#153597) + ,(#153598,#153599) + ,(#153600,#153601) + ,(#153602,#153603 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153596 = CARTESIAN_POINT('',(-6.576,1.728798348773,-2.18618330531)); +#153597 = CARTESIAN_POINT('',(-6.575,1.728798348773,-2.18618330531)); +#153598 = CARTESIAN_POINT('',(-6.576,1.699789102907,-2.158109841568)); +#153599 = CARTESIAN_POINT('',(-6.575,1.699789102907,-2.158109841568)); +#153600 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.118599040749)); +#153601 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.118599040749)); +#153602 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153603 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.067858854432)); +#153604 = ADVANCED_FACE('',(#153605),#153616,.T.); +#153605 = FACE_BOUND('',#153606,.T.); +#153606 = EDGE_LOOP('',(#153607,#153608,#153609,#153610)); +#153607 = ORIENTED_EDGE('',*,*,#153351,.F.); +#153608 = ORIENTED_EDGE('',*,*,#153590,.F.); +#153609 = ORIENTED_EDGE('',*,*,#153204,.T.); +#153610 = ORIENTED_EDGE('',*,*,#153611,.T.); +#153611 = EDGE_CURVE('',#153196,#153352,#153612,.T.); +#153612 = LINE('',#153613,#153614); +#153613 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153614 = VECTOR('',#153615,1.); +#153615 = DIRECTION('',(1.,-0.,-0.)); +#153616 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153617,#153618) + ,(#153619,#153620) + ,(#153621,#153622) + ,(#153623,#153624 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153617 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.067858854432)); +#153618 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.067858854432)); +#153619 = CARTESIAN_POINT('',(-6.576,1.685336467873,-2.017118668115)); +#153620 = CARTESIAN_POINT('',(-6.575,1.685336467873,-2.017118668115)); +#153621 = CARTESIAN_POINT('',(-6.576,1.700205006076,-1.978855576797)); +#153622 = CARTESIAN_POINT('',(-6.575,1.700205006076,-1.978855576797)); +#153623 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153624 = CARTESIAN_POINT('',(-6.575,1.729942082482,-1.953277532054)); +#153625 = ADVANCED_FACE('',(#153626),#153632,.T.); +#153626 = FACE_BOUND('',#153627,.T.); +#153627 = EDGE_LOOP('',(#153628,#153629,#153630,#153631)); +#153628 = ORIENTED_EDGE('',*,*,#153360,.F.); +#153629 = ORIENTED_EDGE('',*,*,#153611,.F.); +#153630 = ORIENTED_EDGE('',*,*,#153195,.T.); +#153631 = ORIENTED_EDGE('',*,*,#153511,.T.); +#153632 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#153633,#153634) + ,(#153635,#153636) + ,(#153637,#153638) + ,(#153639,#153640 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#153633 = CARTESIAN_POINT('',(-6.576,1.729942082482,-1.953277532054)); +#153634 = CARTESIAN_POINT('',(-6.575,1.729942082482,-1.953277532054)); +#153635 = CARTESIAN_POINT('',(-6.576,1.759679158888,-1.927699487314)); +#153636 = CARTESIAN_POINT('',(-6.575,1.759679158888,-1.927699487314)); +#153637 = CARTESIAN_POINT('',(-6.576,1.798878032333,-1.915014440733)); +#153638 = CARTESIAN_POINT('',(-6.575,1.798878032333,-1.915014440733)); +#153639 = CARTESIAN_POINT('',(-6.576,1.847330751234,-1.915014440733)); +#153640 = CARTESIAN_POINT('',(-6.575,1.847330751234,-1.915014440733)); +#153641 = MANIFOLD_SOLID_BREP('',#153642); +#153642 = CLOSED_SHELL('',(#153643,#153767,#153891,#153913,#153930, + #153947,#153964,#153981,#153998,#154015,#154027,#154049,#154066, + #154087,#154104,#154125)); +#153643 = ADVANCED_FACE('',(#153644,#153710),#153762,.F.); +#153644 = FACE_BOUND('',#153645,.T.); +#153645 = EDGE_LOOP('',(#153646,#153656,#153664,#153672,#153680,#153688, + #153696,#153704)); +#153646 = ORIENTED_EDGE('',*,*,#153647,.T.); +#153647 = EDGE_CURVE('',#153648,#153650,#153652,.T.); +#153648 = VERTEX_POINT('',#153649); +#153649 = CARTESIAN_POINT('',(-6.576,1.241567789187,-2.274978631362)); +#153650 = VERTEX_POINT('',#153651); +#153651 = CARTESIAN_POINT('',(-6.576,1.396491718717,-1.868225334499)); +#153652 = LINE('',#153653,#153654); +#153653 = CARTESIAN_POINT('',(-6.576,1.396491718717,-1.868225334499)); +#153654 = VECTOR('',#153655,1.); +#153655 = DIRECTION('',(-0.,0.355935724364,0.934510438744)); +#153656 = ORIENTED_EDGE('',*,*,#153657,.T.); +#153657 = EDGE_CURVE('',#153650,#153658,#153660,.T.); +#153658 = VERTEX_POINT('',#153659); +#153659 = CARTESIAN_POINT('',(-6.576,1.4526386462,-1.868225334499)); +#153660 = LINE('',#153661,#153662); +#153661 = CARTESIAN_POINT('',(-6.576,1.4526386462,-1.868225334499)); +#153662 = VECTOR('',#153663,1.); +#153663 = DIRECTION('',(-0.,1.,-1.54480712812E-14)); +#153664 = ORIENTED_EDGE('',*,*,#153665,.T.); +#153665 = EDGE_CURVE('',#153658,#153666,#153668,.T.); +#153666 = VERTEX_POINT('',#153667); +#153667 = CARTESIAN_POINT('',(-6.576,1.607562575733,-2.274978631362)); +#153668 = LINE('',#153669,#153670); +#153669 = CARTESIAN_POINT('',(-6.576,1.607562575733,-2.274978631362)); +#153670 = VECTOR('',#153671,1.); +#153671 = DIRECTION('',(-0.,0.35593572437,-0.934510438742)); +#153672 = ORIENTED_EDGE('',*,*,#153673,.T.); +#153673 = EDGE_CURVE('',#153666,#153674,#153676,.T.); +#153674 = VERTEX_POINT('',#153675); +#153675 = CARTESIAN_POINT('',(-6.576,1.549544084002,-2.274978631362)); +#153676 = LINE('',#153677,#153678); +#153677 = CARTESIAN_POINT('',(-6.576,1.549544084002,-2.274978631362)); +#153678 = VECTOR('',#153679,1.); +#153679 = DIRECTION('',(-0.,-1.,7.474873200869E-15)); +#153680 = ORIENTED_EDGE('',*,*,#153681,.T.); +#153681 = EDGE_CURVE('',#153674,#153682,#153684,.T.); +#153682 = VERTEX_POINT('',#153683); +#153683 = CARTESIAN_POINT('',(-6.576,1.510449186348,-2.163724534318)); +#153684 = LINE('',#153685,#153686); +#153685 = CARTESIAN_POINT('',(-6.576,1.510449186348,-2.163724534318)); +#153686 = VECTOR('',#153687,1.); +#153687 = DIRECTION('',(-0.,-0.331528418358,0.94344523308)); +#153688 = ORIENTED_EDGE('',*,*,#153689,.T.); +#153689 = EDGE_CURVE('',#153682,#153690,#153692,.T.); +#153690 = VERTEX_POINT('',#153691); +#153691 = CARTESIAN_POINT('',(-6.576,1.341072621779,-2.163724534318)); +#153692 = LINE('',#153693,#153694); +#153693 = CARTESIAN_POINT('',(-6.576,1.341072621779,-2.163724534318)); +#153694 = VECTOR('',#153695,1.); +#153695 = DIRECTION('',(-0.,-1.,1.024181521446E-14)); +#153696 = ORIENTED_EDGE('',*,*,#153697,.T.); +#153697 = EDGE_CURVE('',#153690,#153698,#153700,.T.); +#153698 = VERTEX_POINT('',#153699); +#153699 = CARTESIAN_POINT('',(-6.576,1.299586280916,-2.274978631362)); +#153700 = LINE('',#153701,#153702); +#153701 = CARTESIAN_POINT('',(-6.576,1.299586280916,-2.274978631362)); +#153702 = VECTOR('',#153703,1.); +#153703 = DIRECTION('',(-0.,-0.349395479497,-0.936975345944)); +#153704 = ORIENTED_EDGE('',*,*,#153705,.T.); +#153705 = EDGE_CURVE('',#153698,#153648,#153706,.T.); +#153706 = LINE('',#153707,#153708); +#153707 = CARTESIAN_POINT('',(-6.576,1.241567789187,-2.274978631362)); +#153708 = VECTOR('',#153709,1.); +#153709 = DIRECTION('',(-0.,-1.,1.494974640245E-14)); +#153710 = FACE_BOUND('',#153711,.T.); +#153711 = EDGE_LOOP('',(#153712,#153722,#153730,#153739,#153747,#153756) + ); +#153712 = ORIENTED_EDGE('',*,*,#153713,.F.); +#153713 = EDGE_CURVE('',#153714,#153716,#153718,.T.); +#153714 = VERTEX_POINT('',#153715); +#153715 = CARTESIAN_POINT('',(-6.576,1.493813059684,-2.117767234417)); +#153716 = VERTEX_POINT('',#153717); +#153717 = CARTESIAN_POINT('',(-6.576,1.357292845272,-2.117767234417)); +#153718 = LINE('',#153719,#153720); +#153719 = CARTESIAN_POINT('',(-6.576,1.493813059684,-2.117767234417)); +#153720 = VECTOR('',#153721,1.); +#153721 = DIRECTION('',(0.,-1.,9.530036358243E-15)); +#153722 = ORIENTED_EDGE('',*,*,#153723,.F.); +#153723 = EDGE_CURVE('',#153724,#153714,#153726,.T.); +#153724 = VERTEX_POINT('',#153725); +#153725 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#153726 = LINE('',#153727,#153728); +#153727 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#153728 = VECTOR('',#153729,1.); +#153729 = DIRECTION('',(0.,0.338535034296,-0.940953787683)); +#153730 = ORIENTED_EDGE('',*,*,#153731,.F.); +#153731 = EDGE_CURVE('',#153732,#153724,#153734,.T.); +#153732 = VERTEX_POINT('',#153733); +#153733 = CARTESIAN_POINT('',(-6.576,1.426332770917,-1.920213230317)); +#153734 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153735,#153736,#153737, + #153738),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153735 = CARTESIAN_POINT('',(-6.576,1.426332770917,-1.920213230317)); +#153736 = CARTESIAN_POINT('',(-6.576,1.428308310959,-1.932482373729)); +#153737 = CARTESIAN_POINT('',(-6.576,1.43049180258,-1.94204814656)); +#153738 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#153739 = ORIENTED_EDGE('',*,*,#153740,.F.); +#153740 = EDGE_CURVE('',#153741,#153732,#153743,.T.); +#153741 = VERTEX_POINT('',#153742); +#153742 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#153743 = LINE('',#153744,#153745); +#153744 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#153745 = VECTOR('',#153746,1.); +#153746 = DIRECTION('',(0.,1.,0.)); +#153747 = ORIENTED_EDGE('',*,*,#153748,.F.); +#153748 = EDGE_CURVE('',#153749,#153741,#153751,.T.); +#153749 = VERTEX_POINT('',#153750); +#153750 = CARTESIAN_POINT('',(-6.576,1.418742538128,-1.948702597222)); +#153751 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153752,#153753,#153754, + #153755),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#153752 = CARTESIAN_POINT('',(-6.576,1.418742538128,-1.948702597222)); +#153753 = CARTESIAN_POINT('',(-6.576,1.420718078167,-1.943087904475)); +#153754 = CARTESIAN_POINT('',(-6.576,1.422797594003,-1.933730083227)); +#153755 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#153756 = ORIENTED_EDGE('',*,*,#153757,.F.); +#153757 = EDGE_CURVE('',#153716,#153749,#153758,.T.); +#153758 = LINE('',#153759,#153760); +#153759 = CARTESIAN_POINT('',(-6.576,1.357292845272,-2.117767234417)); +#153760 = VECTOR('',#153761,1.); +#153761 = DIRECTION('',(0.,0.34160383069,0.939844041774)); +#153762 = PLANE('',#153763); +#153763 = AXIS2_PLACEMENT_3D('',#153764,#153765,#153766); +#153764 = CARTESIAN_POINT('',(-6.576,0.,0.)); +#153765 = DIRECTION('',(1.,0.,0.)); +#153766 = DIRECTION('',(0.,0.,-1.)); +#153767 = ADVANCED_FACE('',(#153768,#153834),#153886,.T.); +#153768 = FACE_BOUND('',#153769,.T.); +#153769 = EDGE_LOOP('',(#153770,#153780,#153788,#153796,#153804,#153812, + #153820,#153828)); +#153770 = ORIENTED_EDGE('',*,*,#153771,.F.); +#153771 = EDGE_CURVE('',#153772,#153774,#153776,.T.); +#153772 = VERTEX_POINT('',#153773); +#153773 = CARTESIAN_POINT('',(-6.575,1.241567789187,-2.274978631362)); +#153774 = VERTEX_POINT('',#153775); +#153775 = CARTESIAN_POINT('',(-6.575,1.396491718717,-1.868225334499)); +#153776 = LINE('',#153777,#153778); +#153777 = CARTESIAN_POINT('',(-6.575,1.396491718717,-1.868225334499)); +#153778 = VECTOR('',#153779,1.); +#153779 = DIRECTION('',(-0.,0.355935724364,0.934510438744)); +#153780 = ORIENTED_EDGE('',*,*,#153781,.F.); +#153781 = EDGE_CURVE('',#153782,#153772,#153784,.T.); +#153782 = VERTEX_POINT('',#153783); +#153783 = CARTESIAN_POINT('',(-6.575,1.299586280916,-2.274978631362)); +#153784 = LINE('',#153785,#153786); +#153785 = CARTESIAN_POINT('',(-6.575,1.241567789187,-2.274978631362)); +#153786 = VECTOR('',#153787,1.); +#153787 = DIRECTION('',(-0.,-1.,1.494974640245E-14)); +#153788 = ORIENTED_EDGE('',*,*,#153789,.F.); +#153789 = EDGE_CURVE('',#153790,#153782,#153792,.T.); +#153790 = VERTEX_POINT('',#153791); +#153791 = CARTESIAN_POINT('',(-6.575,1.341072621779,-2.163724534318)); +#153792 = LINE('',#153793,#153794); +#153793 = CARTESIAN_POINT('',(-6.575,1.299586280916,-2.274978631362)); +#153794 = VECTOR('',#153795,1.); +#153795 = DIRECTION('',(-0.,-0.349395479497,-0.936975345944)); +#153796 = ORIENTED_EDGE('',*,*,#153797,.F.); +#153797 = EDGE_CURVE('',#153798,#153790,#153800,.T.); +#153798 = VERTEX_POINT('',#153799); +#153799 = CARTESIAN_POINT('',(-6.575,1.510449186348,-2.163724534318)); +#153800 = LINE('',#153801,#153802); +#153801 = CARTESIAN_POINT('',(-6.575,1.341072621779,-2.163724534318)); +#153802 = VECTOR('',#153803,1.); +#153803 = DIRECTION('',(-0.,-1.,1.024181521446E-14)); +#153804 = ORIENTED_EDGE('',*,*,#153805,.F.); +#153805 = EDGE_CURVE('',#153806,#153798,#153808,.T.); +#153806 = VERTEX_POINT('',#153807); +#153807 = CARTESIAN_POINT('',(-6.575,1.549544084002,-2.274978631362)); +#153808 = LINE('',#153809,#153810); +#153809 = CARTESIAN_POINT('',(-6.575,1.510449186348,-2.163724534318)); +#153810 = VECTOR('',#153811,1.); +#153811 = DIRECTION('',(-0.,-0.331528418358,0.94344523308)); +#153812 = ORIENTED_EDGE('',*,*,#153813,.F.); +#153813 = EDGE_CURVE('',#153814,#153806,#153816,.T.); +#153814 = VERTEX_POINT('',#153815); +#153815 = CARTESIAN_POINT('',(-6.575,1.607562575733,-2.274978631362)); +#153816 = LINE('',#153817,#153818); +#153817 = CARTESIAN_POINT('',(-6.575,1.549544084002,-2.274978631362)); +#153818 = VECTOR('',#153819,1.); +#153819 = DIRECTION('',(-0.,-1.,7.474873200869E-15)); +#153820 = ORIENTED_EDGE('',*,*,#153821,.F.); +#153821 = EDGE_CURVE('',#153822,#153814,#153824,.T.); +#153822 = VERTEX_POINT('',#153823); +#153823 = CARTESIAN_POINT('',(-6.575,1.4526386462,-1.868225334499)); +#153824 = LINE('',#153825,#153826); +#153825 = CARTESIAN_POINT('',(-6.575,1.607562575733,-2.274978631362)); +#153826 = VECTOR('',#153827,1.); +#153827 = DIRECTION('',(-0.,0.35593572437,-0.934510438742)); +#153828 = ORIENTED_EDGE('',*,*,#153829,.F.); +#153829 = EDGE_CURVE('',#153774,#153822,#153830,.T.); +#153830 = LINE('',#153831,#153832); +#153831 = CARTESIAN_POINT('',(-6.575,1.4526386462,-1.868225334499)); +#153832 = VECTOR('',#153833,1.); +#153833 = DIRECTION('',(-0.,1.,-1.54480712812E-14)); +#153834 = FACE_BOUND('',#153835,.T.); +#153835 = EDGE_LOOP('',(#153836,#153846,#153854,#153862,#153871,#153879) + ); +#153836 = ORIENTED_EDGE('',*,*,#153837,.T.); +#153837 = EDGE_CURVE('',#153838,#153840,#153842,.T.); +#153838 = VERTEX_POINT('',#153839); +#153839 = CARTESIAN_POINT('',(-6.575,1.432987221582,-1.948702597222)); +#153840 = VERTEX_POINT('',#153841); +#153841 = CARTESIAN_POINT('',(-6.575,1.493813059684,-2.117767234417)); +#153842 = LINE('',#153843,#153844); +#153843 = CARTESIAN_POINT('',(-6.575,1.432987221582,-1.948702597222)); +#153844 = VECTOR('',#153845,1.); +#153845 = DIRECTION('',(0.,0.338535034296,-0.940953787683)); +#153846 = ORIENTED_EDGE('',*,*,#153847,.T.); +#153847 = EDGE_CURVE('',#153840,#153848,#153850,.T.); +#153848 = VERTEX_POINT('',#153849); +#153849 = CARTESIAN_POINT('',(-6.575,1.357292845272,-2.117767234417)); +#153850 = LINE('',#153851,#153852); +#153851 = CARTESIAN_POINT('',(-6.575,1.493813059684,-2.117767234417)); +#153852 = VECTOR('',#153853,1.); +#153853 = DIRECTION('',(0.,-1.,9.530036358243E-15)); +#153854 = ORIENTED_EDGE('',*,*,#153855,.T.); +#153855 = EDGE_CURVE('',#153848,#153856,#153858,.T.); +#153856 = VERTEX_POINT('',#153857); +#153857 = CARTESIAN_POINT('',(-6.575,1.418742538128,-1.948702597222)); +#153858 = LINE('',#153859,#153860); +#153859 = CARTESIAN_POINT('',(-6.575,1.357292845272,-2.117767234417)); +#153860 = VECTOR('',#153861,1.); +#153861 = DIRECTION('',(0.,0.34160383069,0.939844041774)); +#153862 = ORIENTED_EDGE('',*,*,#153863,.T.); +#153863 = EDGE_CURVE('',#153856,#153864,#153866,.T.); +#153864 = VERTEX_POINT('',#153865); +#153865 = CARTESIAN_POINT('',(-6.575,1.425085061416,-1.920213230317)); +#153866 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153867,#153868,#153869, + #153870),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#153867 = CARTESIAN_POINT('',(-6.575,1.418742538128,-1.948702597222)); +#153868 = CARTESIAN_POINT('',(-6.575,1.420718078167,-1.943087904475)); +#153869 = CARTESIAN_POINT('',(-6.575,1.422797594003,-1.933730083227)); +#153870 = CARTESIAN_POINT('',(-6.575,1.425085061416,-1.920213230317)); +#153871 = ORIENTED_EDGE('',*,*,#153872,.T.); +#153872 = EDGE_CURVE('',#153864,#153873,#153875,.T.); +#153873 = VERTEX_POINT('',#153874); +#153874 = CARTESIAN_POINT('',(-6.575,1.426332770917,-1.920213230317)); +#153875 = LINE('',#153876,#153877); +#153876 = CARTESIAN_POINT('',(-6.575,1.425085061416,-1.920213230317)); +#153877 = VECTOR('',#153878,1.); +#153878 = DIRECTION('',(0.,1.,0.)); +#153879 = ORIENTED_EDGE('',*,*,#153880,.T.); +#153880 = EDGE_CURVE('',#153873,#153838,#153881,.T.); +#153881 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#153882,#153883,#153884, + #153885),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#153882 = CARTESIAN_POINT('',(-6.575,1.426332770917,-1.920213230317)); +#153883 = CARTESIAN_POINT('',(-6.575,1.428308310959,-1.932482373729)); +#153884 = CARTESIAN_POINT('',(-6.575,1.43049180258,-1.94204814656)); +#153885 = CARTESIAN_POINT('',(-6.575,1.432987221582,-1.948702597222)); +#153886 = PLANE('',#153887); +#153887 = AXIS2_PLACEMENT_3D('',#153888,#153889,#153890); +#153888 = CARTESIAN_POINT('',(-6.575,0.,0.)); +#153889 = DIRECTION('',(1.,0.,0.)); +#153890 = DIRECTION('',(0.,0.,-1.)); +#153891 = ADVANCED_FACE('',(#153892),#153908,.F.); +#153892 = FACE_BOUND('',#153893,.T.); +#153893 = EDGE_LOOP('',(#153894,#153895,#153901,#153902)); +#153894 = ORIENTED_EDGE('',*,*,#153771,.T.); +#153895 = ORIENTED_EDGE('',*,*,#153896,.F.); +#153896 = EDGE_CURVE('',#153650,#153774,#153897,.T.); +#153897 = LINE('',#153898,#153899); +#153898 = CARTESIAN_POINT('',(-6.576,1.396491718717,-1.868225334499)); +#153899 = VECTOR('',#153900,1.); +#153900 = DIRECTION('',(1.,-0.,-0.)); +#153901 = ORIENTED_EDGE('',*,*,#153647,.F.); +#153902 = ORIENTED_EDGE('',*,*,#153903,.T.); +#153903 = EDGE_CURVE('',#153648,#153772,#153904,.T.); +#153904 = LINE('',#153905,#153906); +#153905 = CARTESIAN_POINT('',(-6.576,1.241567789187,-2.274978631362)); +#153906 = VECTOR('',#153907,1.); +#153907 = DIRECTION('',(1.,-0.,-0.)); +#153908 = PLANE('',#153909); +#153909 = AXIS2_PLACEMENT_3D('',#153910,#153911,#153912); +#153910 = CARTESIAN_POINT('',(-6.576,1.396491718717,-1.868225334499)); +#153911 = DIRECTION('',(0.,0.934510438744,-0.355935724364)); +#153912 = DIRECTION('',(0.,0.355935724364,0.934510438744)); +#153913 = ADVANCED_FACE('',(#153914),#153925,.F.); +#153914 = FACE_BOUND('',#153915,.T.); +#153915 = EDGE_LOOP('',(#153916,#153917,#153923,#153924)); +#153916 = ORIENTED_EDGE('',*,*,#153829,.T.); +#153917 = ORIENTED_EDGE('',*,*,#153918,.F.); +#153918 = EDGE_CURVE('',#153658,#153822,#153919,.T.); +#153919 = LINE('',#153920,#153921); +#153920 = CARTESIAN_POINT('',(-6.576,1.4526386462,-1.868225334499)); +#153921 = VECTOR('',#153922,1.); +#153922 = DIRECTION('',(1.,-0.,-0.)); +#153923 = ORIENTED_EDGE('',*,*,#153657,.F.); +#153924 = ORIENTED_EDGE('',*,*,#153896,.T.); +#153925 = PLANE('',#153926); +#153926 = AXIS2_PLACEMENT_3D('',#153927,#153928,#153929); +#153927 = CARTESIAN_POINT('',(-6.576,1.4526386462,-1.868225334499)); +#153928 = DIRECTION('',(0.,-1.54480712812E-14,-1.)); +#153929 = DIRECTION('',(0.,1.,-1.54480712812E-14)); +#153930 = ADVANCED_FACE('',(#153931),#153942,.F.); +#153931 = FACE_BOUND('',#153932,.T.); +#153932 = EDGE_LOOP('',(#153933,#153934,#153940,#153941)); +#153933 = ORIENTED_EDGE('',*,*,#153821,.T.); +#153934 = ORIENTED_EDGE('',*,*,#153935,.F.); +#153935 = EDGE_CURVE('',#153666,#153814,#153936,.T.); +#153936 = LINE('',#153937,#153938); +#153937 = CARTESIAN_POINT('',(-6.576,1.607562575733,-2.274978631362)); +#153938 = VECTOR('',#153939,1.); +#153939 = DIRECTION('',(1.,-0.,-0.)); +#153940 = ORIENTED_EDGE('',*,*,#153665,.F.); +#153941 = ORIENTED_EDGE('',*,*,#153918,.T.); +#153942 = PLANE('',#153943); +#153943 = AXIS2_PLACEMENT_3D('',#153944,#153945,#153946); +#153944 = CARTESIAN_POINT('',(-6.576,1.607562575733,-2.274978631362)); +#153945 = DIRECTION('',(0.,-0.934510438742,-0.35593572437)); +#153946 = DIRECTION('',(0.,0.35593572437,-0.934510438742)); +#153947 = ADVANCED_FACE('',(#153948),#153959,.F.); +#153948 = FACE_BOUND('',#153949,.T.); +#153949 = EDGE_LOOP('',(#153950,#153951,#153957,#153958)); +#153950 = ORIENTED_EDGE('',*,*,#153813,.T.); +#153951 = ORIENTED_EDGE('',*,*,#153952,.F.); +#153952 = EDGE_CURVE('',#153674,#153806,#153953,.T.); +#153953 = LINE('',#153954,#153955); +#153954 = CARTESIAN_POINT('',(-6.576,1.549544084002,-2.274978631362)); +#153955 = VECTOR('',#153956,1.); +#153956 = DIRECTION('',(1.,-0.,-0.)); +#153957 = ORIENTED_EDGE('',*,*,#153673,.F.); +#153958 = ORIENTED_EDGE('',*,*,#153935,.T.); +#153959 = PLANE('',#153960); +#153960 = AXIS2_PLACEMENT_3D('',#153961,#153962,#153963); +#153961 = CARTESIAN_POINT('',(-6.576,1.549544084002,-2.274978631362)); +#153962 = DIRECTION('',(0.,7.474873200869E-15,1.)); +#153963 = DIRECTION('',(0.,-1.,7.474873200869E-15)); +#153964 = ADVANCED_FACE('',(#153965),#153976,.F.); +#153965 = FACE_BOUND('',#153966,.T.); +#153966 = EDGE_LOOP('',(#153967,#153968,#153974,#153975)); +#153967 = ORIENTED_EDGE('',*,*,#153805,.T.); +#153968 = ORIENTED_EDGE('',*,*,#153969,.F.); +#153969 = EDGE_CURVE('',#153682,#153798,#153970,.T.); +#153970 = LINE('',#153971,#153972); +#153971 = CARTESIAN_POINT('',(-6.576,1.510449186348,-2.163724534318)); +#153972 = VECTOR('',#153973,1.); +#153973 = DIRECTION('',(1.,-0.,-0.)); +#153974 = ORIENTED_EDGE('',*,*,#153681,.F.); +#153975 = ORIENTED_EDGE('',*,*,#153952,.T.); +#153976 = PLANE('',#153977); +#153977 = AXIS2_PLACEMENT_3D('',#153978,#153979,#153980); +#153978 = CARTESIAN_POINT('',(-6.576,1.510449186348,-2.163724534318)); +#153979 = DIRECTION('',(0.,0.94344523308,0.331528418358)); +#153980 = DIRECTION('',(0.,-0.331528418358,0.94344523308)); +#153981 = ADVANCED_FACE('',(#153982),#153993,.F.); +#153982 = FACE_BOUND('',#153983,.T.); +#153983 = EDGE_LOOP('',(#153984,#153985,#153991,#153992)); +#153984 = ORIENTED_EDGE('',*,*,#153797,.T.); +#153985 = ORIENTED_EDGE('',*,*,#153986,.F.); +#153986 = EDGE_CURVE('',#153690,#153790,#153987,.T.); +#153987 = LINE('',#153988,#153989); +#153988 = CARTESIAN_POINT('',(-6.576,1.341072621779,-2.163724534318)); +#153989 = VECTOR('',#153990,1.); +#153990 = DIRECTION('',(1.,-0.,-0.)); +#153991 = ORIENTED_EDGE('',*,*,#153689,.F.); +#153992 = ORIENTED_EDGE('',*,*,#153969,.T.); +#153993 = PLANE('',#153994); +#153994 = AXIS2_PLACEMENT_3D('',#153995,#153996,#153997); +#153995 = CARTESIAN_POINT('',(-6.576,1.341072621779,-2.163724534318)); +#153996 = DIRECTION('',(0.,1.024181521446E-14,1.)); +#153997 = DIRECTION('',(0.,-1.,1.024181521446E-14)); +#153998 = ADVANCED_FACE('',(#153999),#154010,.F.); +#153999 = FACE_BOUND('',#154000,.T.); +#154000 = EDGE_LOOP('',(#154001,#154002,#154008,#154009)); +#154001 = ORIENTED_EDGE('',*,*,#153789,.T.); +#154002 = ORIENTED_EDGE('',*,*,#154003,.F.); +#154003 = EDGE_CURVE('',#153698,#153782,#154004,.T.); +#154004 = LINE('',#154005,#154006); +#154005 = CARTESIAN_POINT('',(-6.576,1.299586280916,-2.274978631362)); +#154006 = VECTOR('',#154007,1.); +#154007 = DIRECTION('',(1.,-0.,-0.)); +#154008 = ORIENTED_EDGE('',*,*,#153697,.F.); +#154009 = ORIENTED_EDGE('',*,*,#153986,.T.); +#154010 = PLANE('',#154011); +#154011 = AXIS2_PLACEMENT_3D('',#154012,#154013,#154014); +#154012 = CARTESIAN_POINT('',(-6.576,1.299586280916,-2.274978631362)); +#154013 = DIRECTION('',(0.,-0.936975345944,0.349395479497)); +#154014 = DIRECTION('',(0.,-0.349395479497,-0.936975345944)); +#154015 = ADVANCED_FACE('',(#154016),#154022,.F.); +#154016 = FACE_BOUND('',#154017,.T.); +#154017 = EDGE_LOOP('',(#154018,#154019,#154020,#154021)); +#154018 = ORIENTED_EDGE('',*,*,#153781,.T.); +#154019 = ORIENTED_EDGE('',*,*,#153903,.F.); +#154020 = ORIENTED_EDGE('',*,*,#153705,.F.); +#154021 = ORIENTED_EDGE('',*,*,#154003,.T.); +#154022 = PLANE('',#154023); +#154023 = AXIS2_PLACEMENT_3D('',#154024,#154025,#154026); +#154024 = CARTESIAN_POINT('',(-6.576,1.241567789187,-2.274978631362)); +#154025 = DIRECTION('',(0.,1.494974640245E-14,1.)); +#154026 = DIRECTION('',(0.,-1.,1.494974640245E-14)); +#154027 = ADVANCED_FACE('',(#154028),#154044,.T.); +#154028 = FACE_BOUND('',#154029,.T.); +#154029 = EDGE_LOOP('',(#154030,#154031,#154037,#154038)); +#154030 = ORIENTED_EDGE('',*,*,#153847,.F.); +#154031 = ORIENTED_EDGE('',*,*,#154032,.F.); +#154032 = EDGE_CURVE('',#153714,#153840,#154033,.T.); +#154033 = LINE('',#154034,#154035); +#154034 = CARTESIAN_POINT('',(-6.576,1.493813059684,-2.117767234417)); +#154035 = VECTOR('',#154036,1.); +#154036 = DIRECTION('',(1.,-0.,-0.)); +#154037 = ORIENTED_EDGE('',*,*,#153713,.T.); +#154038 = ORIENTED_EDGE('',*,*,#154039,.T.); +#154039 = EDGE_CURVE('',#153716,#153848,#154040,.T.); +#154040 = LINE('',#154041,#154042); +#154041 = CARTESIAN_POINT('',(-6.576,1.357292845272,-2.117767234417)); +#154042 = VECTOR('',#154043,1.); +#154043 = DIRECTION('',(1.,-0.,-0.)); +#154044 = PLANE('',#154045); +#154045 = AXIS2_PLACEMENT_3D('',#154046,#154047,#154048); +#154046 = CARTESIAN_POINT('',(-6.576,1.493813059684,-2.117767234417)); +#154047 = DIRECTION('',(0.,9.530036358243E-15,1.)); +#154048 = DIRECTION('',(0.,-1.,9.530036358243E-15)); +#154049 = ADVANCED_FACE('',(#154050),#154061,.T.); +#154050 = FACE_BOUND('',#154051,.T.); +#154051 = EDGE_LOOP('',(#154052,#154053,#154054,#154055)); +#154052 = ORIENTED_EDGE('',*,*,#153855,.F.); +#154053 = ORIENTED_EDGE('',*,*,#154039,.F.); +#154054 = ORIENTED_EDGE('',*,*,#153757,.T.); +#154055 = ORIENTED_EDGE('',*,*,#154056,.T.); +#154056 = EDGE_CURVE('',#153749,#153856,#154057,.T.); +#154057 = LINE('',#154058,#154059); +#154058 = CARTESIAN_POINT('',(-6.576,1.418742538128,-1.948702597222)); +#154059 = VECTOR('',#154060,1.); +#154060 = DIRECTION('',(1.,-0.,-0.)); +#154061 = PLANE('',#154062); +#154062 = AXIS2_PLACEMENT_3D('',#154063,#154064,#154065); +#154063 = CARTESIAN_POINT('',(-6.576,1.357292845272,-2.117767234417)); +#154064 = DIRECTION('',(0.,0.939844041774,-0.34160383069)); +#154065 = DIRECTION('',(0.,0.34160383069,0.939844041774)); +#154066 = ADVANCED_FACE('',(#154067),#154078,.T.); +#154067 = FACE_BOUND('',#154068,.T.); +#154068 = EDGE_LOOP('',(#154069,#154070,#154071,#154072)); +#154069 = ORIENTED_EDGE('',*,*,#153863,.F.); +#154070 = ORIENTED_EDGE('',*,*,#154056,.F.); +#154071 = ORIENTED_EDGE('',*,*,#153748,.T.); +#154072 = ORIENTED_EDGE('',*,*,#154073,.T.); +#154073 = EDGE_CURVE('',#153741,#153864,#154074,.T.); +#154074 = LINE('',#154075,#154076); +#154075 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#154076 = VECTOR('',#154077,1.); +#154077 = DIRECTION('',(1.,-0.,-0.)); +#154078 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154079,#154080) + ,(#154081,#154082) + ,(#154083,#154084) + ,(#154085,#154086 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154079 = CARTESIAN_POINT('',(-6.576,1.418742538128,-1.948702597222)); +#154080 = CARTESIAN_POINT('',(-6.575,1.418742538128,-1.948702597222)); +#154081 = CARTESIAN_POINT('',(-6.576,1.420718078167,-1.943087904475)); +#154082 = CARTESIAN_POINT('',(-6.575,1.420718078167,-1.943087904475)); +#154083 = CARTESIAN_POINT('',(-6.576,1.422797594003,-1.933730083227)); +#154084 = CARTESIAN_POINT('',(-6.575,1.422797594003,-1.933730083227)); +#154085 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#154086 = CARTESIAN_POINT('',(-6.575,1.425085061416,-1.920213230317)); +#154087 = ADVANCED_FACE('',(#154088),#154099,.T.); +#154088 = FACE_BOUND('',#154089,.T.); +#154089 = EDGE_LOOP('',(#154090,#154091,#154092,#154093)); +#154090 = ORIENTED_EDGE('',*,*,#153872,.F.); +#154091 = ORIENTED_EDGE('',*,*,#154073,.F.); +#154092 = ORIENTED_EDGE('',*,*,#153740,.T.); +#154093 = ORIENTED_EDGE('',*,*,#154094,.T.); +#154094 = EDGE_CURVE('',#153732,#153873,#154095,.T.); +#154095 = LINE('',#154096,#154097); +#154096 = CARTESIAN_POINT('',(-6.576,1.426332770917,-1.920213230317)); +#154097 = VECTOR('',#154098,1.); +#154098 = DIRECTION('',(1.,-0.,-0.)); +#154099 = PLANE('',#154100); +#154100 = AXIS2_PLACEMENT_3D('',#154101,#154102,#154103); +#154101 = CARTESIAN_POINT('',(-6.576,1.425085061416,-1.920213230317)); +#154102 = DIRECTION('',(0.,0.,-1.)); +#154103 = DIRECTION('',(-1.,0.,-0.)); +#154104 = ADVANCED_FACE('',(#154105),#154116,.T.); +#154105 = FACE_BOUND('',#154106,.T.); +#154106 = EDGE_LOOP('',(#154107,#154108,#154109,#154110)); +#154107 = ORIENTED_EDGE('',*,*,#153880,.F.); +#154108 = ORIENTED_EDGE('',*,*,#154094,.F.); +#154109 = ORIENTED_EDGE('',*,*,#153731,.T.); +#154110 = ORIENTED_EDGE('',*,*,#154111,.T.); +#154111 = EDGE_CURVE('',#153724,#153838,#154112,.T.); +#154112 = LINE('',#154113,#154114); +#154113 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#154114 = VECTOR('',#154115,1.); +#154115 = DIRECTION('',(1.,-0.,-0.)); +#154116 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154117,#154118) + ,(#154119,#154120) + ,(#154121,#154122) + ,(#154123,#154124 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154117 = CARTESIAN_POINT('',(-6.576,1.426332770917,-1.920213230317)); +#154118 = CARTESIAN_POINT('',(-6.575,1.426332770917,-1.920213230317)); +#154119 = CARTESIAN_POINT('',(-6.576,1.428308310959,-1.932482373729)); +#154120 = CARTESIAN_POINT('',(-6.575,1.428308310959,-1.932482373729)); +#154121 = CARTESIAN_POINT('',(-6.576,1.43049180258,-1.94204814656)); +#154122 = CARTESIAN_POINT('',(-6.575,1.43049180258,-1.94204814656)); +#154123 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#154124 = CARTESIAN_POINT('',(-6.575,1.432987221582,-1.948702597222)); +#154125 = ADVANCED_FACE('',(#154126),#154132,.T.); +#154126 = FACE_BOUND('',#154127,.T.); +#154127 = EDGE_LOOP('',(#154128,#154129,#154130,#154131)); +#154128 = ORIENTED_EDGE('',*,*,#153837,.F.); +#154129 = ORIENTED_EDGE('',*,*,#154111,.F.); +#154130 = ORIENTED_EDGE('',*,*,#153723,.T.); +#154131 = ORIENTED_EDGE('',*,*,#154032,.T.); +#154132 = PLANE('',#154133); +#154133 = AXIS2_PLACEMENT_3D('',#154134,#154135,#154136); +#154134 = CARTESIAN_POINT('',(-6.576,1.432987221582,-1.948702597222)); +#154135 = DIRECTION('',(0.,-0.940953787683,-0.338535034296)); +#154136 = DIRECTION('',(0.,0.338535034296,-0.940953787683)); +#154137 = MANIFOLD_SOLID_BREP('',#154138); +#154138 = CLOSED_SHELL('',(#154139,#154464,#154789,#154815,#154836, + #154857,#154878,#154899,#154920,#154941,#154962,#154983,#155004, + #155025,#155046,#155063,#155080,#155097,#155114,#155135,#155156, + #155177,#155198,#155219,#155240,#155261,#155278,#155299,#155320, + #155337,#155358,#155379,#155400,#155417,#155438,#155454,#155486)); +#154139 = ADVANCED_FACE('',(#154140,#154434),#154459,.F.); +#154140 = FACE_BOUND('',#154141,.T.); +#154141 = EDGE_LOOP('',(#154142,#154153,#154162,#154171,#154180,#154189, + #154198,#154207,#154216,#154225,#154234,#154243,#154252,#154261, + #154269,#154277,#154285,#154294,#154303,#154312,#154321,#154330, + #154339,#154348,#154357,#154366,#154375,#154383,#154392,#154401, + #154410,#154418,#154427)); +#154142 = ORIENTED_EDGE('',*,*,#154143,.T.); +#154143 = EDGE_CURVE('',#154144,#154146,#154148,.T.); +#154144 = VERTEX_POINT('',#154145); +#154145 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#154146 = VERTEX_POINT('',#154147); +#154147 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154148 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154149,#154150,#154151, + #154152),.UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.), + .PIECEWISE_BEZIER_KNOTS.); +#154149 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#154150 = CARTESIAN_POINT('',(-6.576,3.719380111813,-1.697994560336)); +#154151 = CARTESIAN_POINT('',(-6.576,3.837951125992,-1.544719887161)); +#154152 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154153 = ORIENTED_EDGE('',*,*,#154154,.T.); +#154154 = EDGE_CURVE('',#154146,#154155,#154157,.T.); +#154155 = VERTEX_POINT('',#154156); +#154156 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154157 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154158,#154159,#154160, + #154161),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154158 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154159 = CARTESIAN_POINT('',(-6.576,4.034605248805,-1.40590514085)); +#154160 = CARTESIAN_POINT('',(-6.576,4.089552805415,-1.327821839153)); +#154161 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154162 = ORIENTED_EDGE('',*,*,#154163,.T.); +#154163 = EDGE_CURVE('',#154155,#154164,#154166,.T.); +#154164 = VERTEX_POINT('',#154165); +#154165 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154166 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154167,#154168,#154169, + #154170),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#154167 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154168 = CARTESIAN_POINT('',(-6.576,4.26885523663,-1.168763233152)); +#154169 = CARTESIAN_POINT('',(-6.576,4.407669982942,-1.113815721361)); +#154170 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154171 = ORIENTED_EDGE('',*,*,#154172,.T.); +#154172 = EDGE_CURVE('',#154164,#154173,#154175,.T.); +#154173 = VERTEX_POINT('',#154174); +#154174 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154175 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154176,#154177,#154178, + #154179),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#154176 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154177 = CARTESIAN_POINT('',(-6.576,4.679515559977,-1.113815721361)); +#154178 = CARTESIAN_POINT('',(-6.576,4.798086518996,-1.154303361447)); +#154179 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154180 = ORIENTED_EDGE('',*,*,#154181,.T.); +#154181 = EDGE_CURVE('',#154173,#154182,#154184,.T.); +#154182 = VERTEX_POINT('',#154183); +#154183 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154184 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154185,#154186,#154187, + #154188),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#154185 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154186 = CARTESIAN_POINT('',(-6.576,4.9484692068,-1.261306423792)); +#154187 = CARTESIAN_POINT('',(-6.576,4.988956836544,-1.304686038908)); +#154188 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154189 = ORIENTED_EDGE('',*,*,#154190,.T.); +#154190 = EDGE_CURVE('',#154182,#154191,#154193,.T.); +#154191 = VERTEX_POINT('',#154192); +#154192 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154193 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154194,#154195,#154196, + #154197),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#154194 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154195 = CARTESIAN_POINT('',(-6.576,5.04968825358,-1.350957611819)); +#154196 = CARTESIAN_POINT('',(-6.576,5.069932096032,-1.348065654026)); +#154197 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154198 = ORIENTED_EDGE('',*,*,#154199,.T.); +#154199 = EDGE_CURVE('',#154191,#154200,#154202,.T.); +#154200 = VERTEX_POINT('',#154201); +#154201 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154202 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154203,#154204,#154205, + #154206),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#154203 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154204 = CARTESIAN_POINT('',(-6.576,5.217422770883,-1.348065654026)); +#154205 = CARTESIAN_POINT('',(-6.576,5.335993702321,-1.397229212307)); +#154206 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154207 = ORIENTED_EDGE('',*,*,#154208,.T.); +#154208 = EDGE_CURVE('',#154200,#154209,#154211,.T.); +#154209 = VERTEX_POINT('',#154210); +#154210 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154211 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154212,#154213,#154214, + #154215),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#154212 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154213 = CARTESIAN_POINT('',(-6.576,5.512404224009,-1.573639630571)); +#154214 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.692210589591)); +#154215 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154216 = ORIENTED_EDGE('',*,*,#154217,.T.); +#154217 = EDGE_CURVE('',#154209,#154218,#154220,.T.); +#154218 = VERTEX_POINT('',#154219); +#154219 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154220 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154221,#154222,#154223, + #154224),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#154221 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154222 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.932244437842)); +#154223 = CARTESIAN_POINT('',(-6.576,5.518188174071,-2.045031481274)); +#154224 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154225 = ORIENTED_EDGE('',*,*,#154226,.T.); +#154226 = EDGE_CURVE('',#154218,#154227,#154229,.T.); +#154227 = VERTEX_POINT('',#154228); +#154228 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#154229 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154230,#154231,#154232, + #154233),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#154230 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154231 = CARTESIAN_POINT('',(-6.576,5.376481442386,-2.201198029505)); +#154232 = CARTESIAN_POINT('',(-6.576,5.298398113111,-2.247469574834)); +#154233 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#154234 = ORIENTED_EDGE('',*,*,#154235,.T.); +#154235 = EDGE_CURVE('',#154227,#154236,#154238,.T.); +#154236 = VERTEX_POINT('',#154237); +#154237 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#154238 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154239,#154240,#154241, + #154242),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#154239 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#154240 = CARTESIAN_POINT('',(-6.576,5.171151253133,-2.386284321147)); +#154241 = CARTESIAN_POINT('',(-6.576,5.061256250233,-2.467259580634)); +#154242 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#154243 = ORIENTED_EDGE('',*,*,#154244,.T.); +#154244 = EDGE_CURVE('',#154236,#154245,#154247,.T.); +#154245 = VERTEX_POINT('',#154246); +#154246 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#154247 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154248,#154249,#154250, + #154251),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#154248 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#154249 = CARTESIAN_POINT('',(-6.576,4.774950746331,-2.467259580634)); +#154250 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.337120735283)); +#154251 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#154252 = ORIENTED_EDGE('',*,*,#154253,.T.); +#154253 = EDGE_CURVE('',#154245,#154254,#154256,.T.); +#154254 = VERTEX_POINT('',#154255); +#154255 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.149142403106)); +#154256 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154257,#154258,#154259, + #154260),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#154257 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#154258 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.169386245559)); +#154259 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.160710344599)); +#154260 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.149142403106)); +#154261 = ORIENTED_EDGE('',*,*,#154262,.T.); +#154262 = EDGE_CURVE('',#154254,#154263,#154265,.T.); +#154263 = VERTEX_POINT('',#154264); +#154264 = CARTESIAN_POINT('',(-6.576,4.239935493218,-1.935136312894)); +#154265 = LINE('',#154266,#154267); +#154266 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.149142403106)); +#154267 = VECTOR('',#154268,1.); +#154268 = DIRECTION('',(0.,-0.884094950248,0.467307306755)); +#154269 = ORIENTED_EDGE('',*,*,#154270,.T.); +#154270 = EDGE_CURVE('',#154263,#154271,#154273,.T.); +#154271 = VERTEX_POINT('',#154272); +#154272 = CARTESIAN_POINT('',(-6.576,4.329586653666,-1.781861639718)); +#154273 = LINE('',#154274,#154275); +#154274 = CARTESIAN_POINT('',(-6.576,4.239935493218,-1.935136312894)); +#154275 = VECTOR('',#154276,1.); +#154276 = DIRECTION('',(0.,0.50488304865,0.863187758941)); +#154277 = ORIENTED_EDGE('',*,*,#154278,.T.); +#154278 = EDGE_CURVE('',#154271,#154279,#154281,.T.); +#154279 = VERTEX_POINT('',#154280); +#154280 = CARTESIAN_POINT('',(-6.576,4.717111204347,-1.984299843598)); +#154281 = LINE('',#154282,#154283); +#154282 = CARTESIAN_POINT('',(-6.576,4.329586653666,-1.781861639718)); +#154283 = VECTOR('',#154284,1.); +#154284 = DIRECTION('',(0.,0.886348842796,-0.463018065387)); +#154285 = ORIENTED_EDGE('',*,*,#154286,.T.); +#154286 = EDGE_CURVE('',#154279,#154287,#154289,.T.); +#154287 = VERTEX_POINT('',#154288); +#154288 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#154289 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154290,#154291,#154292, + #154293),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#154290 = CARTESIAN_POINT('',(-6.576,4.717111204347,-1.984299843598)); +#154291 = CARTESIAN_POINT('',(-6.576,4.769166720425,-1.923568371401)); +#154292 = CARTESIAN_POINT('',(-6.576,4.847250049699,-1.885972727031)); +#154293 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#154294 = ORIENTED_EDGE('',*,*,#154295,.T.); +#154295 = EDGE_CURVE('',#154287,#154296,#154298,.T.); +#154296 = VERTEX_POINT('',#154297); +#154297 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#154298 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154299,#154300,#154301, + #154302),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#154299 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#154300 = CARTESIAN_POINT('',(-6.576,5.058364209699,-1.885972727031)); +#154301 = CARTESIAN_POINT('',(-6.576,5.165367227225,-1.966947986517)); +#154302 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#154303 = ORIENTED_EDGE('',*,*,#154304,.T.); +#154304 = EDGE_CURVE('',#154296,#154305,#154307,.T.); +#154305 = VERTEX_POINT('',#154306); +#154306 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#154307 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154308,#154309,#154310, + #154311),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#154308 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#154309 = CARTESIAN_POINT('',(-6.576,5.307073958909,-2.030571444089)); +#154310 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.929352342149)); +#154311 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#154312 = ORIENTED_EDGE('',*,*,#154313,.T.); +#154313 = EDGE_CURVE('',#154305,#154314,#154316,.T.); +#154314 = VERTEX_POINT('',#154315); +#154315 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#154316 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154317,#154318,#154319, + #154320),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#154317 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#154318 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.651722794365)); +#154319 = CARTESIAN_POINT('',(-6.576,5.249234472087,-1.521583949015)); +#154320 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#154321 = ORIENTED_EDGE('',*,*,#154322,.T.); +#154322 = EDGE_CURVE('',#154314,#154323,#154325,.T.); +#154323 = VERTEX_POINT('',#154324); +#154324 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#154325 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154326,#154327,#154328, + #154329),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#154326 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#154327 = CARTESIAN_POINT('',(-6.576,5.035228381873,-1.521583949015)); +#154328 = CARTESIAN_POINT('',(-6.576,4.980280880423,-1.538935806093)); +#154329 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#154330 = ORIENTED_EDGE('',*,*,#154331,.T.); +#154331 = EDGE_CURVE('',#154323,#154332,#154334,.T.); +#154332 = VERTEX_POINT('',#154333); +#154333 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#154334 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154335,#154336,#154337, + #154338),.UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.), + .PIECEWISE_BEZIER_KNOTS.); +#154335 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#154336 = CARTESIAN_POINT('',(-6.576,4.881953819018,-1.403013155475)); +#154337 = CARTESIAN_POINT('',(-6.576,4.731571131214,-1.28733418183)); +#154338 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#154339 = ORIENTED_EDGE('',*,*,#154340,.T.); +#154340 = EDGE_CURVE('',#154332,#154341,#154343,.T.); +#154341 = VERTEX_POINT('',#154342); +#154342 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#154343 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154344,#154345,#154346, + #154347),.UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.), + .PIECEWISE_BEZIER_KNOTS.); +#154344 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#154345 = CARTESIAN_POINT('',(-6.576,4.341154595158,-1.28733418183)); +#154346 = CARTESIAN_POINT('',(-6.576,4.16763613469,-1.446392770593)); +#154347 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#154348 = ORIENTED_EDGE('',*,*,#154349,.T.); +#154349 = EDGE_CURVE('',#154341,#154350,#154352,.T.); +#154350 = VERTEX_POINT('',#154351); +#154351 = CARTESIAN_POINT('',(-6.576,4.121364589359,-1.648830974473)); +#154352 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154353,#154354,#154355, + #154356),.UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.), + .PIECEWISE_BEZIER_KNOTS.); +#154353 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#154354 = CARTESIAN_POINT('',(-6.576,4.135824461066,-1.648830974473)); +#154355 = CARTESIAN_POINT('',(-6.576,4.130040490319,-1.648830974473)); +#154356 = CARTESIAN_POINT('',(-6.576,4.121364589359,-1.648830974473)); +#154357 = ORIENTED_EDGE('',*,*,#154358,.T.); +#154358 = EDGE_CURVE('',#154350,#154359,#154361,.T.); +#154359 = VERTEX_POINT('',#154360); +#154360 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#154361 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154362,#154363,#154364, + #154365),.UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.), + .PIECEWISE_BEZIER_KNOTS.); +#154362 = CARTESIAN_POINT('',(-6.576,4.121364589359,-1.648830974473)); +#154363 = CARTESIAN_POINT('',(-6.576,3.997009714754,-1.648830974473)); +#154364 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.750050076413)); +#154365 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#154366 = ORIENTED_EDGE('',*,*,#154367,.T.); +#154367 = EDGE_CURVE('',#154359,#154368,#154370,.T.); +#154368 = VERTEX_POINT('',#154369); +#154369 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#154370 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154371,#154372,#154373, + #154374),.UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.), + .PIECEWISE_BEZIER_KNOTS.); +#154371 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#154372 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.992975910038)); +#154373 = CARTESIAN_POINT('',(-6.576,3.985441773263,-2.091303026603)); +#154374 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#154375 = ORIENTED_EDGE('',*,*,#154376,.T.); +#154376 = EDGE_CURVE('',#154368,#154377,#154379,.T.); +#154377 = VERTEX_POINT('',#154378); +#154378 = CARTESIAN_POINT('',(-6.576,4.234151632792,-2.099978927563)); +#154379 = LINE('',#154380,#154381); +#154380 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#154381 = VECTOR('',#154382,1.); +#154382 = DIRECTION('',(0.,1.,-9.997342480386E-15)); +#154383 = ORIENTED_EDGE('',*,*,#154384,.T.); +#154384 = EDGE_CURVE('',#154377,#154385,#154387,.T.); +#154385 = VERTEX_POINT('',#154386); +#154386 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#154387 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154388,#154389,#154390, + #154391),.UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.), + .PIECEWISE_BEZIER_KNOTS.); +#154388 = CARTESIAN_POINT('',(-6.576,4.234151632792,-2.099978927563)); +#154389 = CARTESIAN_POINT('',(-6.576,4.239935603538,-2.099978927563)); +#154390 = CARTESIAN_POINT('',(-6.576,4.245719574285,-2.09708699735)); +#154391 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#154392 = ORIENTED_EDGE('',*,*,#154393,.T.); +#154393 = EDGE_CURVE('',#154385,#154394,#154396,.T.); +#154394 = VERTEX_POINT('',#154395); +#154395 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#154396 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154397,#154398,#154399, + #154400),.UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.), + .PIECEWISE_BEZIER_KNOTS.); +#154397 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#154398 = CARTESIAN_POINT('',(-6.576,4.300667020575,-2.09708699735)); +#154399 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.137574682254)); +#154400 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#154401 = ORIENTED_EDGE('',*,*,#154402,.T.); +#154402 = EDGE_CURVE('',#154394,#154403,#154405,.T.); +#154403 = VERTEX_POINT('',#154404); +#154404 = CARTESIAN_POINT('',(-6.576,4.257287295137,-2.276389318247)); +#154405 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154406,#154407,#154408, + #154409),.UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.), + .PIECEWISE_BEZIER_KNOTS.); +#154406 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#154407 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.233009703128)); +#154408 = CARTESIAN_POINT('',(-6.576,4.303558950788,-2.273497388035)); +#154409 = CARTESIAN_POINT('',(-6.576,4.257287295137,-2.276389318247)); +#154410 = ORIENTED_EDGE('',*,*,#154411,.T.); +#154411 = EDGE_CURVE('',#154403,#154412,#154414,.T.); +#154412 = VERTEX_POINT('',#154413); +#154413 = CARTESIAN_POINT('',(-6.576,4.086660875201,-2.276389318247)); +#154414 = LINE('',#154415,#154416); +#154415 = CARTESIAN_POINT('',(-6.576,4.257287295137,-2.276389318247)); +#154416 = VECTOR('',#154417,1.); +#154417 = DIRECTION('',(0.,-1.,8.488310875113E-15)); +#154418 = ORIENTED_EDGE('',*,*,#154419,.T.); +#154419 = EDGE_CURVE('',#154412,#154420,#154422,.T.); +#154420 = VERTEX_POINT('',#154421); +#154421 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#154422 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154423,#154424,#154425, + #154426),.UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.), + .PIECEWISE_BEZIER_KNOTS.); +#154423 = CARTESIAN_POINT('',(-6.576,4.086660875201,-2.276389318247)); +#154424 = CARTESIAN_POINT('',(-6.576,3.985441773263,-2.267713417287)); +#154425 = CARTESIAN_POINT('',(-6.576,3.89289857228,-2.221441761636)); +#154426 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#154427 = ORIENTED_EDGE('',*,*,#154428,.T.); +#154428 = EDGE_CURVE('',#154420,#154144,#154429,.T.); +#154429 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154430,#154431,#154432, + #154433),.UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.), + .PIECEWISE_BEZIER_KNOTS.); +#154430 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#154431 = CARTESIAN_POINT('',(-6.576,3.75408382597,-2.071059184152)); +#154432 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.972732012425)); +#154433 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#154434 = FACE_BOUND('',#154435,.T.); +#154435 = EDGE_LOOP('',(#154436,#154450)); +#154436 = ORIENTED_EDGE('',*,*,#154437,.F.); +#154437 = EDGE_CURVE('',#154438,#154440,#154442,.T.); +#154438 = VERTEX_POINT('',#154439); +#154439 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#154440 = VERTEX_POINT('',#154441); +#154441 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#154442 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154443,#154444,#154445, + #154446,#154447,#154448,#154449),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0., + 1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#154443 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#154444 = CARTESIAN_POINT('',(-6.576,4.873277918059,-2.293741340805)); +#154445 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.241685714409)); +#154446 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.180954297372)); +#154447 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.117330839803)); +#154448 = CARTESIAN_POINT('',(-6.576,4.876169848271,-2.06816725394)); +#154449 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#154450 = ORIENTED_EDGE('',*,*,#154451,.F.); +#154451 = EDGE_CURVE('',#154440,#154438,#154452,.T.); +#154452 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154453,#154454,#154455, + #154456,#154457,#154458),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#154453 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#154454 = CARTESIAN_POINT('',(-6.576,4.997632792663,-2.06816725394)); +#154455 = CARTESIAN_POINT('',(-6.576,5.04968830874,-2.117330839803)); +#154456 = CARTESIAN_POINT('',(-6.576,5.04968830874,-2.244577754941)); +#154457 = CARTESIAN_POINT('',(-6.576,4.997632792663,-2.293741340805)); +#154458 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#154459 = PLANE('',#154460); +#154460 = AXIS2_PLACEMENT_3D('',#154461,#154462,#154463); +#154461 = CARTESIAN_POINT('',(-6.576,3.798909433774,-1.636540078007)); +#154462 = DIRECTION('',(1.,0.,0.)); +#154463 = DIRECTION('',(0.,0.,-1.)); +#154464 = ADVANCED_FACE('',(#154465,#154759),#154784,.T.); +#154465 = FACE_BOUND('',#154466,.T.); +#154466 = EDGE_LOOP('',(#154467,#154478,#154487,#154496,#154504,#154513, + #154522,#154531,#154539,#154548,#154557,#154566,#154575,#154584, + #154593,#154602,#154611,#154620,#154629,#154637,#154645,#154653, + #154662,#154671,#154680,#154689,#154698,#154707,#154716,#154725, + #154734,#154743,#154752)); +#154467 = ORIENTED_EDGE('',*,*,#154468,.F.); +#154468 = EDGE_CURVE('',#154469,#154471,#154473,.T.); +#154469 = VERTEX_POINT('',#154470); +#154470 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.871512910485)); +#154471 = VERTEX_POINT('',#154472); +#154472 = CARTESIAN_POINT('',(-6.575,4.00279357518,-1.492664371082)); +#154473 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154474,#154475,#154476, + #154477),.UNSPECIFIED.,.F.,.F.,(4,4),(35.,36.), + .PIECEWISE_BEZIER_KNOTS.); +#154474 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.871512910485)); +#154475 = CARTESIAN_POINT('',(-6.575,3.719380111813,-1.697994560336)); +#154476 = CARTESIAN_POINT('',(-6.575,3.837951125992,-1.544719887161)); +#154477 = CARTESIAN_POINT('',(-6.575,4.00279357518,-1.492664371082)); +#154478 = ORIENTED_EDGE('',*,*,#154479,.F.); +#154479 = EDGE_CURVE('',#154480,#154469,#154482,.T.); +#154480 = VERTEX_POINT('',#154481); +#154481 = CARTESIAN_POINT('',(-6.575,3.823491254286,-2.146250472894)); +#154482 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154483,#154484,#154485, + #154486),.UNSPECIFIED.,.F.,.F.,(4,4),(34.,35.), + .PIECEWISE_BEZIER_KNOTS.); +#154483 = CARTESIAN_POINT('',(-6.575,3.823491254286,-2.146250472894)); +#154484 = CARTESIAN_POINT('',(-6.575,3.75408382597,-2.071059184152)); +#154485 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.972732012425)); +#154486 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.871512910485)); +#154487 = ORIENTED_EDGE('',*,*,#154488,.F.); +#154488 = EDGE_CURVE('',#154489,#154480,#154491,.T.); +#154489 = VERTEX_POINT('',#154490); +#154490 = CARTESIAN_POINT('',(-6.575,4.086660875201,-2.276389318247)); +#154491 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154492,#154493,#154494, + #154495),.UNSPECIFIED.,.F.,.F.,(4,4),(33.,34.), + .PIECEWISE_BEZIER_KNOTS.); +#154492 = CARTESIAN_POINT('',(-6.575,4.086660875201,-2.276389318247)); +#154493 = CARTESIAN_POINT('',(-6.575,3.985441773263,-2.267713417287)); +#154494 = CARTESIAN_POINT('',(-6.575,3.89289857228,-2.221441761636)); +#154495 = CARTESIAN_POINT('',(-6.575,3.823491254286,-2.146250472894)); +#154496 = ORIENTED_EDGE('',*,*,#154497,.F.); +#154497 = EDGE_CURVE('',#154498,#154489,#154500,.T.); +#154498 = VERTEX_POINT('',#154499); +#154499 = CARTESIAN_POINT('',(-6.575,4.257287295137,-2.276389318247)); +#154500 = LINE('',#154501,#154502); +#154501 = CARTESIAN_POINT('',(-6.575,4.095336776161,-2.276389318247)); +#154502 = VECTOR('',#154503,1.); +#154503 = DIRECTION('',(0.,-1.,4.998683952027E-14)); +#154504 = ORIENTED_EDGE('',*,*,#154505,.F.); +#154505 = EDGE_CURVE('',#154506,#154498,#154508,.T.); +#154506 = VERTEX_POINT('',#154507); +#154507 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.186738157797)); +#154508 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154509,#154510,#154511, + #154512),.UNSPECIFIED.,.F.,.F.,(4,4),(28.,29.), + .PIECEWISE_BEZIER_KNOTS.); +#154509 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.186738157797)); +#154510 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.233009703128)); +#154511 = CARTESIAN_POINT('',(-6.575,4.303558950788,-2.273497388035)); +#154512 = CARTESIAN_POINT('',(-6.575,4.257287295137,-2.276389318247)); +#154513 = ORIENTED_EDGE('',*,*,#154514,.F.); +#154514 = EDGE_CURVE('',#154515,#154506,#154517,.T.); +#154515 = VERTEX_POINT('',#154516); +#154516 = CARTESIAN_POINT('',(-6.575,4.251503434711,-2.09708699735)); +#154517 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154518,#154519,#154520, + #154521),.UNSPECIFIED.,.F.,.F.,(4,4),(27.,28.), + .PIECEWISE_BEZIER_KNOTS.); +#154518 = CARTESIAN_POINT('',(-6.575,4.251503434711,-2.09708699735)); +#154519 = CARTESIAN_POINT('',(-6.575,4.300667020575,-2.09708699735)); +#154520 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.137574682254)); +#154521 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.186738157797)); +#154522 = ORIENTED_EDGE('',*,*,#154523,.F.); +#154523 = EDGE_CURVE('',#154524,#154515,#154526,.T.); +#154524 = VERTEX_POINT('',#154525); +#154525 = CARTESIAN_POINT('',(-6.575,4.234151632792,-2.099978927563)); +#154526 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154527,#154528,#154529, + #154530),.UNSPECIFIED.,.F.,.F.,(4,4),(26.,27.), + .PIECEWISE_BEZIER_KNOTS.); +#154527 = CARTESIAN_POINT('',(-6.575,4.234151632792,-2.099978927563)); +#154528 = CARTESIAN_POINT('',(-6.575,4.239935603538,-2.099978927563)); +#154529 = CARTESIAN_POINT('',(-6.575,4.245719574285,-2.09708699735)); +#154530 = CARTESIAN_POINT('',(-6.575,4.251503434711,-2.09708699735)); +#154531 = ORIENTED_EDGE('',*,*,#154532,.F.); +#154532 = EDGE_CURVE('',#154533,#154524,#154535,.T.); +#154533 = VERTEX_POINT('',#154534); +#154534 = CARTESIAN_POINT('',(-6.575,4.10401278744,-2.099978927563)); +#154535 = LINE('',#154536,#154537); +#154536 = CARTESIAN_POINT('',(-6.575,4.10401278744,-2.099978927563)); +#154537 = VECTOR('',#154538,1.); +#154538 = DIRECTION('',(0.,1.,-9.997342480386E-15)); +#154539 = ORIENTED_EDGE('',*,*,#154540,.F.); +#154540 = EDGE_CURVE('',#154541,#154533,#154543,.T.); +#154541 = VERTEX_POINT('',#154542); +#154542 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.874404951018)); +#154543 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154544,#154545,#154546, + #154547),.UNSPECIFIED.,.F.,.F.,(4,4),(24.,25.), + .PIECEWISE_BEZIER_KNOTS.); +#154544 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.874404951018)); +#154545 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.992975910038)); +#154546 = CARTESIAN_POINT('',(-6.575,3.985441773263,-2.091303026603)); +#154547 = CARTESIAN_POINT('',(-6.575,4.10401278744,-2.099978927563)); +#154548 = ORIENTED_EDGE('',*,*,#154549,.F.); +#154549 = EDGE_CURVE('',#154550,#154541,#154552,.T.); +#154550 = VERTEX_POINT('',#154551); +#154551 = CARTESIAN_POINT('',(-6.575,4.121364589359,-1.648830974473)); +#154552 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154553,#154554,#154555, + #154556),.UNSPECIFIED.,.F.,.F.,(4,4),(23.,24.), + .PIECEWISE_BEZIER_KNOTS.); +#154553 = CARTESIAN_POINT('',(-6.575,4.121364589359,-1.648830974473)); +#154554 = CARTESIAN_POINT('',(-6.575,3.997009714754,-1.648830974473)); +#154555 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.750050076413)); +#154556 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.874404951018)); +#154557 = ORIENTED_EDGE('',*,*,#154558,.F.); +#154558 = EDGE_CURVE('',#154559,#154550,#154561,.T.); +#154559 = VERTEX_POINT('',#154560); +#154560 = CARTESIAN_POINT('',(-6.575,4.144500362025,-1.648830974473)); +#154561 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154562,#154563,#154564, + #154565),.UNSPECIFIED.,.F.,.F.,(4,4),(22.,23.), + .PIECEWISE_BEZIER_KNOTS.); +#154562 = CARTESIAN_POINT('',(-6.575,4.144500362025,-1.648830974473)); +#154563 = CARTESIAN_POINT('',(-6.575,4.135824461066,-1.648830974473)); +#154564 = CARTESIAN_POINT('',(-6.575,4.130040490319,-1.648830974473)); +#154565 = CARTESIAN_POINT('',(-6.575,4.121364589359,-1.648830974473)); +#154566 = ORIENTED_EDGE('',*,*,#154567,.F.); +#154567 = EDGE_CURVE('',#154568,#154559,#154570,.T.); +#154568 = VERTEX_POINT('',#154569); +#154569 = CARTESIAN_POINT('',(-6.575,4.549376769785,-1.28733418183)); +#154570 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154571,#154572,#154573, + #154574),.UNSPECIFIED.,.F.,.F.,(4,4),(21.,22.), + .PIECEWISE_BEZIER_KNOTS.); +#154571 = CARTESIAN_POINT('',(-6.575,4.549376769785,-1.28733418183)); +#154572 = CARTESIAN_POINT('',(-6.575,4.341154595158,-1.28733418183)); +#154573 = CARTESIAN_POINT('',(-6.575,4.16763613469,-1.446392770593)); +#154574 = CARTESIAN_POINT('',(-6.575,4.144500362025,-1.648830974473)); +#154575 = ORIENTED_EDGE('',*,*,#154576,.F.); +#154576 = EDGE_CURVE('',#154577,#154568,#154579,.T.); +#154577 = VERTEX_POINT('',#154578); +#154578 = CARTESIAN_POINT('',(-6.575,4.936901265308,-1.564963564134)); +#154579 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154580,#154581,#154582, + #154583),.UNSPECIFIED.,.F.,.F.,(4,4),(20.,21.), + .PIECEWISE_BEZIER_KNOTS.); +#154580 = CARTESIAN_POINT('',(-6.575,4.936901265308,-1.564963564134)); +#154581 = CARTESIAN_POINT('',(-6.575,4.881953819018,-1.403013155475)); +#154582 = CARTESIAN_POINT('',(-6.575,4.731571131214,-1.28733418183)); +#154583 = CARTESIAN_POINT('',(-6.575,4.549376769785,-1.28733418183)); +#154584 = ORIENTED_EDGE('',*,*,#154585,.F.); +#154585 = EDGE_CURVE('',#154586,#154577,#154588,.T.); +#154586 = VERTEX_POINT('',#154587); +#154587 = CARTESIAN_POINT('',(-6.575,5.090175883325,-1.521583949015)); +#154588 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154589,#154590,#154591, + #154592),.UNSPECIFIED.,.F.,.F.,(4,4),(19.,20.), + .PIECEWISE_BEZIER_KNOTS.); +#154589 = CARTESIAN_POINT('',(-6.575,5.090175883325,-1.521583949015)); +#154590 = CARTESIAN_POINT('',(-6.575,5.035228381873,-1.521583949015)); +#154591 = CARTESIAN_POINT('',(-6.575,4.980280880423,-1.538935806093)); +#154592 = CARTESIAN_POINT('',(-6.575,4.936901265308,-1.564963564134)); +#154593 = ORIENTED_EDGE('',*,*,#154594,.F.); +#154594 = EDGE_CURVE('',#154595,#154586,#154597,.T.); +#154595 = VERTEX_POINT('',#154596); +#154596 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.810781383129)); +#154597 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154598,#154599,#154600, + #154601),.UNSPECIFIED.,.F.,.F.,(4,4),(18.,19.), + .PIECEWISE_BEZIER_KNOTS.); +#154598 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.810781383129)); +#154599 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.651722794365)); +#154600 = CARTESIAN_POINT('',(-6.575,5.249234472087,-1.521583949015)); +#154601 = CARTESIAN_POINT('',(-6.575,5.090175883325,-1.521583949015)); +#154602 = ORIENTED_EDGE('',*,*,#154603,.F.); +#154603 = EDGE_CURVE('',#154604,#154595,#154606,.T.); +#154604 = VERTEX_POINT('',#154605); +#154605 = CARTESIAN_POINT('',(-6.575,5.20585485697,-2.076843044577)); +#154606 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154607,#154608,#154609, + #154610),.UNSPECIFIED.,.F.,.F.,(4,4),(17.,18.), + .PIECEWISE_BEZIER_KNOTS.); +#154607 = CARTESIAN_POINT('',(-6.575,5.20585485697,-2.076843044577)); +#154608 = CARTESIAN_POINT('',(-6.575,5.307073958909,-2.030571444089)); +#154609 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.929352342149)); +#154610 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.810781383129)); +#154611 = ORIENTED_EDGE('',*,*,#154612,.F.); +#154612 = EDGE_CURVE('',#154613,#154604,#154615,.T.); +#154613 = VERTEX_POINT('',#154614); +#154614 = CARTESIAN_POINT('',(-6.575,4.934009279934,-1.885972727031)); +#154615 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154616,#154617,#154618, + #154619),.UNSPECIFIED.,.F.,.F.,(4,4),(16.,17.), + .PIECEWISE_BEZIER_KNOTS.); +#154616 = CARTESIAN_POINT('',(-6.575,4.934009279934,-1.885972727031)); +#154617 = CARTESIAN_POINT('',(-6.575,5.058364209699,-1.885972727031)); +#154618 = CARTESIAN_POINT('',(-6.575,5.165367227225,-1.966947986517)); +#154619 = CARTESIAN_POINT('',(-6.575,5.20585485697,-2.076843044577)); +#154620 = ORIENTED_EDGE('',*,*,#154621,.F.); +#154621 = EDGE_CURVE('',#154622,#154613,#154624,.T.); +#154622 = VERTEX_POINT('',#154623); +#154623 = CARTESIAN_POINT('',(-6.575,4.717111204347,-1.984299843598)); +#154624 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154625,#154626,#154627, + #154628),.UNSPECIFIED.,.F.,.F.,(4,4),(15.,16.), + .PIECEWISE_BEZIER_KNOTS.); +#154625 = CARTESIAN_POINT('',(-6.575,4.717111204347,-1.984299843598)); +#154626 = CARTESIAN_POINT('',(-6.575,4.769166720425,-1.923568371401)); +#154627 = CARTESIAN_POINT('',(-6.575,4.847250049699,-1.885972727031)); +#154628 = CARTESIAN_POINT('',(-6.575,4.934009279934,-1.885972727031)); +#154629 = ORIENTED_EDGE('',*,*,#154630,.F.); +#154630 = EDGE_CURVE('',#154631,#154622,#154633,.T.); +#154631 = VERTEX_POINT('',#154632); +#154632 = CARTESIAN_POINT('',(-6.575,4.329586653666,-1.781861639718)); +#154633 = LINE('',#154634,#154635); +#154634 = CARTESIAN_POINT('',(-6.575,4.329586653666,-1.781861639718)); +#154635 = VECTOR('',#154636,1.); +#154636 = DIRECTION('',(0.,0.886348842796,-0.463018065387)); +#154637 = ORIENTED_EDGE('',*,*,#154638,.F.); +#154638 = EDGE_CURVE('',#154639,#154631,#154641,.T.); +#154639 = VERTEX_POINT('',#154640); +#154640 = CARTESIAN_POINT('',(-6.575,4.239935493218,-1.935136312894)); +#154641 = LINE('',#154642,#154643); +#154642 = CARTESIAN_POINT('',(-6.575,4.239935493218,-1.935136312894)); +#154643 = VECTOR('',#154644,1.); +#154644 = DIRECTION('',(0.,0.50488304865,0.863187758941)); +#154645 = ORIENTED_EDGE('',*,*,#154646,.F.); +#154646 = EDGE_CURVE('',#154647,#154639,#154649,.T.); +#154647 = VERTEX_POINT('',#154648); +#154648 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.149142403106)); +#154649 = LINE('',#154650,#154651); +#154650 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.149142403106)); +#154651 = VECTOR('',#154652,1.); +#154652 = DIRECTION('',(0.,-0.884094950248,0.467307306755)); +#154653 = ORIENTED_EDGE('',*,*,#154654,.F.); +#154654 = EDGE_CURVE('',#154655,#154647,#154657,.T.); +#154655 = VERTEX_POINT('',#154656); +#154656 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.17806214652)); +#154657 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154658,#154659,#154660, + #154661),.UNSPECIFIED.,.F.,.F.,(4,4),(11.,12.), + .PIECEWISE_BEZIER_KNOTS.); +#154658 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.17806214652)); +#154659 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.169386245559)); +#154660 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.160710344599)); +#154661 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.149142403106)); +#154662 = ORIENTED_EDGE('',*,*,#154663,.F.); +#154663 = EDGE_CURVE('',#154664,#154655,#154666,.T.); +#154664 = VERTEX_POINT('',#154665); +#154665 = CARTESIAN_POINT('',(-6.575,4.934009335094,-2.467259580634)); +#154666 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154667,#154668,#154669, + #154670),.UNSPECIFIED.,.F.,.F.,(4,4),(10.,11.), + .PIECEWISE_BEZIER_KNOTS.); +#154667 = CARTESIAN_POINT('',(-6.575,4.934009335094,-2.467259580634)); +#154668 = CARTESIAN_POINT('',(-6.575,4.774950746331,-2.467259580634)); +#154669 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.337120735283)); +#154670 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.17806214652)); +#154671 = ORIENTED_EDGE('',*,*,#154672,.F.); +#154672 = EDGE_CURVE('',#154673,#154664,#154675,.T.); +#154673 = VERTEX_POINT('',#154674); +#154674 = CARTESIAN_POINT('',(-6.575,5.208746925084,-2.270605347499)); +#154675 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154676,#154677,#154678, + #154679),.UNSPECIFIED.,.F.,.F.,(4,4),(9.,10.), + .PIECEWISE_BEZIER_KNOTS.); +#154676 = CARTESIAN_POINT('',(-6.575,5.208746925084,-2.270605347499)); +#154677 = CARTESIAN_POINT('',(-6.575,5.171151253133,-2.386284321147)); +#154678 = CARTESIAN_POINT('',(-6.575,5.061256250233,-2.467259580634)); +#154679 = CARTESIAN_POINT('',(-6.575,4.934009335094,-2.467259580634)); +#154680 = ORIENTED_EDGE('',*,*,#154681,.F.); +#154681 = EDGE_CURVE('',#154682,#154673,#154684,.T.); +#154682 = VERTEX_POINT('',#154683); +#154683 = CARTESIAN_POINT('',(-6.575,5.440104872374,-2.131790601189)); +#154684 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154685,#154686,#154687, + #154688),.UNSPECIFIED.,.F.,.F.,(4,4),(8.,9.), + .PIECEWISE_BEZIER_KNOTS.); +#154685 = CARTESIAN_POINT('',(-6.575,5.440104872374,-2.131790601189)); +#154686 = CARTESIAN_POINT('',(-6.575,5.376481442386,-2.201198029505)); +#154687 = CARTESIAN_POINT('',(-6.575,5.298398113111,-2.247469574834)); +#154688 = CARTESIAN_POINT('',(-6.575,5.208746925084,-2.270605347499)); +#154689 = ORIENTED_EDGE('',*,*,#154690,.F.); +#154690 = EDGE_CURVE('',#154691,#154682,#154693,.T.); +#154691 = VERTEX_POINT('',#154692); +#154692 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.816565464194)); +#154693 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154694,#154695,#154696, + #154697),.UNSPECIFIED.,.F.,.F.,(4,4),(7.,8.), + .PIECEWISE_BEZIER_KNOTS.); +#154694 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.816565464194)); +#154695 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.932244437842)); +#154696 = CARTESIAN_POINT('',(-6.575,5.518188174071,-2.045031481274)); +#154697 = CARTESIAN_POINT('',(-6.575,5.440104872374,-2.131790601189)); +#154698 = ORIENTED_EDGE('',*,*,#154699,.F.); +#154699 = EDGE_CURVE('',#154700,#154691,#154702,.T.); +#154700 = VERTEX_POINT('',#154701); +#154701 = CARTESIAN_POINT('',(-6.575,5.425644917928,-1.486880427917)); +#154702 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154703,#154704,#154705, + #154706),.UNSPECIFIED.,.F.,.F.,(4,4),(6.,7.), + .PIECEWISE_BEZIER_KNOTS.); +#154703 = CARTESIAN_POINT('',(-6.575,5.425644917928,-1.486880427917)); +#154704 = CARTESIAN_POINT('',(-6.575,5.512404224009,-1.573639630571)); +#154705 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.692210589591)); +#154706 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.816565464194)); +#154707 = ORIENTED_EDGE('',*,*,#154708,.F.); +#154708 = EDGE_CURVE('',#154709,#154700,#154711,.T.); +#154709 = VERTEX_POINT('',#154710); +#154710 = CARTESIAN_POINT('',(-6.575,5.093067868697,-1.348065654026)); +#154711 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154712,#154713,#154714, + #154715),.UNSPECIFIED.,.F.,.F.,(4,4),(5.,6.), + .PIECEWISE_BEZIER_KNOTS.); +#154712 = CARTESIAN_POINT('',(-6.575,5.093067868697,-1.348065654026)); +#154713 = CARTESIAN_POINT('',(-6.575,5.217422770883,-1.348065654026)); +#154714 = CARTESIAN_POINT('',(-6.575,5.335993702321,-1.397229212307)); +#154715 = CARTESIAN_POINT('',(-6.575,5.425644917928,-1.486880427917)); +#154716 = ORIENTED_EDGE('',*,*,#154717,.F.); +#154717 = EDGE_CURVE('',#154718,#154709,#154720,.T.); +#154718 = VERTEX_POINT('',#154719); +#154719 = CARTESIAN_POINT('',(-6.575,5.026552480914,-1.353849597191)); +#154720 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154721,#154722,#154723, + #154724),.UNSPECIFIED.,.F.,.F.,(4,4),(4.,5.), + .PIECEWISE_BEZIER_KNOTS.); +#154721 = CARTESIAN_POINT('',(-6.575,5.026552480914,-1.353849597191)); +#154722 = CARTESIAN_POINT('',(-6.575,5.04968825358,-1.350957611819)); +#154723 = CARTESIAN_POINT('',(-6.575,5.069932096032,-1.348065654026)); +#154724 = CARTESIAN_POINT('',(-6.575,5.093067868697,-1.348065654026)); +#154725 = ORIENTED_EDGE('',*,*,#154726,.F.); +#154726 = EDGE_CURVE('',#154727,#154718,#154729,.T.); +#154727 = VERTEX_POINT('',#154728); +#154728 = CARTESIAN_POINT('',(-6.575,4.899305620937,-1.226602723425)); +#154729 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154730,#154731,#154732, + #154733),.UNSPECIFIED.,.F.,.F.,(4,4),(3.,4.), + .PIECEWISE_BEZIER_KNOTS.); +#154730 = CARTESIAN_POINT('',(-6.575,4.899305620937,-1.226602723425)); +#154731 = CARTESIAN_POINT('',(-6.575,4.9484692068,-1.261306423792)); +#154732 = CARTESIAN_POINT('',(-6.575,4.988956836544,-1.304686038908)); +#154733 = CARTESIAN_POINT('',(-6.575,5.026552480914,-1.353849597191)); +#154734 = ORIENTED_EDGE('',*,*,#154735,.F.); +#154735 = EDGE_CURVE('',#154736,#154727,#154738,.T.); +#154736 = VERTEX_POINT('',#154737); +#154737 = CARTESIAN_POINT('',(-6.575,4.552268699999,-1.113815721361)); +#154738 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154739,#154740,#154741, + #154742),.UNSPECIFIED.,.F.,.F.,(4,4),(2.,3.), + .PIECEWISE_BEZIER_KNOTS.); +#154739 = CARTESIAN_POINT('',(-6.575,4.552268699999,-1.113815721361)); +#154740 = CARTESIAN_POINT('',(-6.575,4.679515559977,-1.113815721361)); +#154741 = CARTESIAN_POINT('',(-6.575,4.798086518996,-1.154303361447)); +#154742 = CARTESIAN_POINT('',(-6.575,4.899305620937,-1.226602723425)); +#154743 = ORIENTED_EDGE('',*,*,#154744,.F.); +#154744 = EDGE_CURVE('',#154745,#154736,#154747,.T.); +#154745 = VERTEX_POINT('',#154746); +#154746 = CARTESIAN_POINT('',(-6.575,4.15896023373,-1.264198395376)); +#154747 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154748,#154749,#154750, + #154751),.UNSPECIFIED.,.F.,.F.,(4,4),(1.,2.), + .PIECEWISE_BEZIER_KNOTS.); +#154748 = CARTESIAN_POINT('',(-6.575,4.15896023373,-1.264198395376)); +#154749 = CARTESIAN_POINT('',(-6.575,4.26885523663,-1.168763233152)); +#154750 = CARTESIAN_POINT('',(-6.575,4.407669982942,-1.113815721361)); +#154751 = CARTESIAN_POINT('',(-6.575,4.552268699999,-1.113815721361)); +#154752 = ORIENTED_EDGE('',*,*,#154753,.F.); +#154753 = EDGE_CURVE('',#154471,#154745,#154754,.T.); +#154754 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154755,#154756,#154757, + #154758),.UNSPECIFIED.,.F.,.F.,(4,4),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154755 = CARTESIAN_POINT('',(-6.575,4.00279357518,-1.492664371082)); +#154756 = CARTESIAN_POINT('',(-6.575,4.034605248805,-1.40590514085)); +#154757 = CARTESIAN_POINT('',(-6.575,4.089552805415,-1.327821839153)); +#154758 = CARTESIAN_POINT('',(-6.575,4.15896023373,-1.264198395376)); +#154759 = FACE_BOUND('',#154760,.T.); +#154760 = EDGE_LOOP('',(#154761,#154774)); +#154761 = ORIENTED_EDGE('',*,*,#154762,.T.); +#154762 = EDGE_CURVE('',#154763,#154765,#154767,.T.); +#154763 = VERTEX_POINT('',#154764); +#154764 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.06816725394)); +#154765 = VERTEX_POINT('',#154766); +#154766 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.293741340805)); +#154767 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154768,#154769,#154770, + #154771,#154772,#154773),.UNSPECIFIED.,.F.,.F.,(4,2,4),(2.,3.,4.), + .UNSPECIFIED.); +#154768 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.06816725394)); +#154769 = CARTESIAN_POINT('',(-6.575,4.997632792663,-2.06816725394)); +#154770 = CARTESIAN_POINT('',(-6.575,5.04968830874,-2.117330839803)); +#154771 = CARTESIAN_POINT('',(-6.575,5.04968830874,-2.244577754941)); +#154772 = CARTESIAN_POINT('',(-6.575,4.997632792663,-2.293741340805)); +#154773 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.293741340805)); +#154774 = ORIENTED_EDGE('',*,*,#154775,.T.); +#154775 = EDGE_CURVE('',#154765,#154763,#154776,.T.); +#154776 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#154777,#154778,#154779, + #154780,#154781,#154782,#154783),.UNSPECIFIED.,.F.,.F.,(4,3,4),(0., + 1.,2.),.PIECEWISE_BEZIER_KNOTS.); +#154777 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.293741340805)); +#154778 = CARTESIAN_POINT('',(-6.575,4.873277918059,-2.293741340805)); +#154779 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.241685714409)); +#154780 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.180954297372)); +#154781 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.117330839803)); +#154782 = CARTESIAN_POINT('',(-6.575,4.876169848271,-2.06816725394)); +#154783 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.06816725394)); +#154784 = PLANE('',#154785); +#154785 = AXIS2_PLACEMENT_3D('',#154786,#154787,#154788); +#154786 = CARTESIAN_POINT('',(-6.575,3.798909433774,-1.636540078007)); +#154787 = DIRECTION('',(1.,0.,0.)); +#154788 = DIRECTION('',(0.,0.,-1.)); +#154789 = ADVANCED_FACE('',(#154790),#154806,.F.); +#154790 = FACE_BOUND('',#154791,.F.); +#154791 = EDGE_LOOP('',(#154792,#154798,#154799,#154805)); +#154792 = ORIENTED_EDGE('',*,*,#154793,.F.); +#154793 = EDGE_CURVE('',#154144,#154469,#154794,.T.); +#154794 = LINE('',#154795,#154796); +#154795 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#154796 = VECTOR('',#154797,1.); +#154797 = DIRECTION('',(1.,-0.,-0.)); +#154798 = ORIENTED_EDGE('',*,*,#154143,.T.); +#154799 = ORIENTED_EDGE('',*,*,#154800,.T.); +#154800 = EDGE_CURVE('',#154146,#154471,#154801,.T.); +#154801 = LINE('',#154802,#154803); +#154802 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154803 = VECTOR('',#154804,1.); +#154804 = DIRECTION('',(1.,-0.,-0.)); +#154805 = ORIENTED_EDGE('',*,*,#154468,.F.); +#154806 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154807,#154808) + ,(#154809,#154810) + ,(#154811,#154812) + ,(#154813,#154814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(35.,36.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154807 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#154808 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.871512910485)); +#154809 = CARTESIAN_POINT('',(-6.576,3.719380111813,-1.697994560336)); +#154810 = CARTESIAN_POINT('',(-6.575,3.719380111813,-1.697994560336)); +#154811 = CARTESIAN_POINT('',(-6.576,3.837951125992,-1.544719887161)); +#154812 = CARTESIAN_POINT('',(-6.575,3.837951125992,-1.544719887161)); +#154813 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154814 = CARTESIAN_POINT('',(-6.575,4.00279357518,-1.492664371082)); +#154815 = ADVANCED_FACE('',(#154816),#154827,.F.); +#154816 = FACE_BOUND('',#154817,.F.); +#154817 = EDGE_LOOP('',(#154818,#154819,#154820,#154826)); +#154818 = ORIENTED_EDGE('',*,*,#154800,.F.); +#154819 = ORIENTED_EDGE('',*,*,#154154,.T.); +#154820 = ORIENTED_EDGE('',*,*,#154821,.T.); +#154821 = EDGE_CURVE('',#154155,#154745,#154822,.T.); +#154822 = LINE('',#154823,#154824); +#154823 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154824 = VECTOR('',#154825,1.); +#154825 = DIRECTION('',(1.,-0.,-0.)); +#154826 = ORIENTED_EDGE('',*,*,#154753,.F.); +#154827 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154828,#154829) + ,(#154830,#154831) + ,(#154832,#154833) + ,(#154834,#154835 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(0.,1.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154828 = CARTESIAN_POINT('',(-6.576,4.00279357518,-1.492664371082)); +#154829 = CARTESIAN_POINT('',(-6.575,4.00279357518,-1.492664371082)); +#154830 = CARTESIAN_POINT('',(-6.576,4.034605248805,-1.40590514085)); +#154831 = CARTESIAN_POINT('',(-6.575,4.034605248805,-1.40590514085)); +#154832 = CARTESIAN_POINT('',(-6.576,4.089552805415,-1.327821839153)); +#154833 = CARTESIAN_POINT('',(-6.575,4.089552805415,-1.327821839153)); +#154834 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154835 = CARTESIAN_POINT('',(-6.575,4.15896023373,-1.264198395376)); +#154836 = ADVANCED_FACE('',(#154837),#154848,.F.); +#154837 = FACE_BOUND('',#154838,.F.); +#154838 = EDGE_LOOP('',(#154839,#154840,#154841,#154847)); +#154839 = ORIENTED_EDGE('',*,*,#154821,.F.); +#154840 = ORIENTED_EDGE('',*,*,#154163,.T.); +#154841 = ORIENTED_EDGE('',*,*,#154842,.T.); +#154842 = EDGE_CURVE('',#154164,#154736,#154843,.T.); +#154843 = LINE('',#154844,#154845); +#154844 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154845 = VECTOR('',#154846,1.); +#154846 = DIRECTION('',(1.,-0.,-0.)); +#154847 = ORIENTED_EDGE('',*,*,#154744,.F.); +#154848 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154849,#154850) + ,(#154851,#154852) + ,(#154853,#154854) + ,(#154855,#154856 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154849 = CARTESIAN_POINT('',(-6.576,4.15896023373,-1.264198395376)); +#154850 = CARTESIAN_POINT('',(-6.575,4.15896023373,-1.264198395376)); +#154851 = CARTESIAN_POINT('',(-6.576,4.26885523663,-1.168763233152)); +#154852 = CARTESIAN_POINT('',(-6.575,4.26885523663,-1.168763233152)); +#154853 = CARTESIAN_POINT('',(-6.576,4.407669982942,-1.113815721361)); +#154854 = CARTESIAN_POINT('',(-6.575,4.407669982942,-1.113815721361)); +#154855 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154856 = CARTESIAN_POINT('',(-6.575,4.552268699999,-1.113815721361)); +#154857 = ADVANCED_FACE('',(#154858),#154869,.F.); +#154858 = FACE_BOUND('',#154859,.F.); +#154859 = EDGE_LOOP('',(#154860,#154861,#154862,#154868)); +#154860 = ORIENTED_EDGE('',*,*,#154842,.F.); +#154861 = ORIENTED_EDGE('',*,*,#154172,.T.); +#154862 = ORIENTED_EDGE('',*,*,#154863,.T.); +#154863 = EDGE_CURVE('',#154173,#154727,#154864,.T.); +#154864 = LINE('',#154865,#154866); +#154865 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154866 = VECTOR('',#154867,1.); +#154867 = DIRECTION('',(1.,-0.,-0.)); +#154868 = ORIENTED_EDGE('',*,*,#154735,.F.); +#154869 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154870,#154871) + ,(#154872,#154873) + ,(#154874,#154875) + ,(#154876,#154877 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(2.,3.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154870 = CARTESIAN_POINT('',(-6.576,4.552268699999,-1.113815721361)); +#154871 = CARTESIAN_POINT('',(-6.575,4.552268699999,-1.113815721361)); +#154872 = CARTESIAN_POINT('',(-6.576,4.679515559977,-1.113815721361)); +#154873 = CARTESIAN_POINT('',(-6.575,4.679515559977,-1.113815721361)); +#154874 = CARTESIAN_POINT('',(-6.576,4.798086518996,-1.154303361447)); +#154875 = CARTESIAN_POINT('',(-6.575,4.798086518996,-1.154303361447)); +#154876 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154877 = CARTESIAN_POINT('',(-6.575,4.899305620937,-1.226602723425)); +#154878 = ADVANCED_FACE('',(#154879),#154890,.F.); +#154879 = FACE_BOUND('',#154880,.F.); +#154880 = EDGE_LOOP('',(#154881,#154882,#154883,#154889)); +#154881 = ORIENTED_EDGE('',*,*,#154863,.F.); +#154882 = ORIENTED_EDGE('',*,*,#154181,.T.); +#154883 = ORIENTED_EDGE('',*,*,#154884,.T.); +#154884 = EDGE_CURVE('',#154182,#154718,#154885,.T.); +#154885 = LINE('',#154886,#154887); +#154886 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154887 = VECTOR('',#154888,1.); +#154888 = DIRECTION('',(1.,-0.,-0.)); +#154889 = ORIENTED_EDGE('',*,*,#154726,.F.); +#154890 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154891,#154892) + ,(#154893,#154894) + ,(#154895,#154896) + ,(#154897,#154898 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(3.,4.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154891 = CARTESIAN_POINT('',(-6.576,4.899305620937,-1.226602723425)); +#154892 = CARTESIAN_POINT('',(-6.575,4.899305620937,-1.226602723425)); +#154893 = CARTESIAN_POINT('',(-6.576,4.9484692068,-1.261306423792)); +#154894 = CARTESIAN_POINT('',(-6.575,4.9484692068,-1.261306423792)); +#154895 = CARTESIAN_POINT('',(-6.576,4.988956836544,-1.304686038908)); +#154896 = CARTESIAN_POINT('',(-6.575,4.988956836544,-1.304686038908)); +#154897 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154898 = CARTESIAN_POINT('',(-6.575,5.026552480914,-1.353849597191)); +#154899 = ADVANCED_FACE('',(#154900),#154911,.F.); +#154900 = FACE_BOUND('',#154901,.F.); +#154901 = EDGE_LOOP('',(#154902,#154903,#154904,#154910)); +#154902 = ORIENTED_EDGE('',*,*,#154884,.F.); +#154903 = ORIENTED_EDGE('',*,*,#154190,.T.); +#154904 = ORIENTED_EDGE('',*,*,#154905,.T.); +#154905 = EDGE_CURVE('',#154191,#154709,#154906,.T.); +#154906 = LINE('',#154907,#154908); +#154907 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154908 = VECTOR('',#154909,1.); +#154909 = DIRECTION('',(1.,-0.,-0.)); +#154910 = ORIENTED_EDGE('',*,*,#154717,.F.); +#154911 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154912,#154913) + ,(#154914,#154915) + ,(#154916,#154917) + ,(#154918,#154919 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(4.,5.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154912 = CARTESIAN_POINT('',(-6.576,5.026552480914,-1.353849597191)); +#154913 = CARTESIAN_POINT('',(-6.575,5.026552480914,-1.353849597191)); +#154914 = CARTESIAN_POINT('',(-6.576,5.04968825358,-1.350957611819)); +#154915 = CARTESIAN_POINT('',(-6.575,5.04968825358,-1.350957611819)); +#154916 = CARTESIAN_POINT('',(-6.576,5.069932096032,-1.348065654026)); +#154917 = CARTESIAN_POINT('',(-6.575,5.069932096032,-1.348065654026)); +#154918 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154919 = CARTESIAN_POINT('',(-6.575,5.093067868697,-1.348065654026)); +#154920 = ADVANCED_FACE('',(#154921),#154932,.F.); +#154921 = FACE_BOUND('',#154922,.F.); +#154922 = EDGE_LOOP('',(#154923,#154924,#154925,#154931)); +#154923 = ORIENTED_EDGE('',*,*,#154905,.F.); +#154924 = ORIENTED_EDGE('',*,*,#154199,.T.); +#154925 = ORIENTED_EDGE('',*,*,#154926,.T.); +#154926 = EDGE_CURVE('',#154200,#154700,#154927,.T.); +#154927 = LINE('',#154928,#154929); +#154928 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154929 = VECTOR('',#154930,1.); +#154930 = DIRECTION('',(1.,-0.,-0.)); +#154931 = ORIENTED_EDGE('',*,*,#154708,.F.); +#154932 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154933,#154934) + ,(#154935,#154936) + ,(#154937,#154938) + ,(#154939,#154940 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(5.,6.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154933 = CARTESIAN_POINT('',(-6.576,5.093067868697,-1.348065654026)); +#154934 = CARTESIAN_POINT('',(-6.575,5.093067868697,-1.348065654026)); +#154935 = CARTESIAN_POINT('',(-6.576,5.217422770883,-1.348065654026)); +#154936 = CARTESIAN_POINT('',(-6.575,5.217422770883,-1.348065654026)); +#154937 = CARTESIAN_POINT('',(-6.576,5.335993702321,-1.397229212307)); +#154938 = CARTESIAN_POINT('',(-6.575,5.335993702321,-1.397229212307)); +#154939 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154940 = CARTESIAN_POINT('',(-6.575,5.425644917928,-1.486880427917)); +#154941 = ADVANCED_FACE('',(#154942),#154953,.F.); +#154942 = FACE_BOUND('',#154943,.F.); +#154943 = EDGE_LOOP('',(#154944,#154945,#154946,#154952)); +#154944 = ORIENTED_EDGE('',*,*,#154926,.F.); +#154945 = ORIENTED_EDGE('',*,*,#154208,.T.); +#154946 = ORIENTED_EDGE('',*,*,#154947,.T.); +#154947 = EDGE_CURVE('',#154209,#154691,#154948,.T.); +#154948 = LINE('',#154949,#154950); +#154949 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154950 = VECTOR('',#154951,1.); +#154951 = DIRECTION('',(1.,-0.,-0.)); +#154952 = ORIENTED_EDGE('',*,*,#154699,.F.); +#154953 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154954,#154955) + ,(#154956,#154957) + ,(#154958,#154959) + ,(#154960,#154961 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(6.,7.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154954 = CARTESIAN_POINT('',(-6.576,5.425644917928,-1.486880427917)); +#154955 = CARTESIAN_POINT('',(-6.575,5.425644917928,-1.486880427917)); +#154956 = CARTESIAN_POINT('',(-6.576,5.512404224009,-1.573639630571)); +#154957 = CARTESIAN_POINT('',(-6.575,5.512404224009,-1.573639630571)); +#154958 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.692210589591)); +#154959 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.692210589591)); +#154960 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154961 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.816565464194)); +#154962 = ADVANCED_FACE('',(#154963),#154974,.F.); +#154963 = FACE_BOUND('',#154964,.F.); +#154964 = EDGE_LOOP('',(#154965,#154966,#154967,#154973)); +#154965 = ORIENTED_EDGE('',*,*,#154947,.F.); +#154966 = ORIENTED_EDGE('',*,*,#154217,.T.); +#154967 = ORIENTED_EDGE('',*,*,#154968,.T.); +#154968 = EDGE_CURVE('',#154218,#154682,#154969,.T.); +#154969 = LINE('',#154970,#154971); +#154970 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154971 = VECTOR('',#154972,1.); +#154972 = DIRECTION('',(1.,-0.,-0.)); +#154973 = ORIENTED_EDGE('',*,*,#154690,.F.); +#154974 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154975,#154976) + ,(#154977,#154978) + ,(#154979,#154980) + ,(#154981,#154982 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(7.,8.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154975 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.816565464194)); +#154976 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.816565464194)); +#154977 = CARTESIAN_POINT('',(-6.576,5.561567789186,-1.932244437842)); +#154978 = CARTESIAN_POINT('',(-6.575,5.561567789186,-1.932244437842)); +#154979 = CARTESIAN_POINT('',(-6.576,5.518188174071,-2.045031481274)); +#154980 = CARTESIAN_POINT('',(-6.575,5.518188174071,-2.045031481274)); +#154981 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154982 = CARTESIAN_POINT('',(-6.575,5.440104872374,-2.131790601189)); +#154983 = ADVANCED_FACE('',(#154984),#154995,.F.); +#154984 = FACE_BOUND('',#154985,.F.); +#154985 = EDGE_LOOP('',(#154986,#154987,#154988,#154994)); +#154986 = ORIENTED_EDGE('',*,*,#154968,.F.); +#154987 = ORIENTED_EDGE('',*,*,#154226,.T.); +#154988 = ORIENTED_EDGE('',*,*,#154989,.T.); +#154989 = EDGE_CURVE('',#154227,#154673,#154990,.T.); +#154990 = LINE('',#154991,#154992); +#154991 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#154992 = VECTOR('',#154993,1.); +#154993 = DIRECTION('',(1.,-0.,-0.)); +#154994 = ORIENTED_EDGE('',*,*,#154681,.F.); +#154995 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#154996,#154997) + ,(#154998,#154999) + ,(#155000,#155001) + ,(#155002,#155003 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(8.,9.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#154996 = CARTESIAN_POINT('',(-6.576,5.440104872374,-2.131790601189)); +#154997 = CARTESIAN_POINT('',(-6.575,5.440104872374,-2.131790601189)); +#154998 = CARTESIAN_POINT('',(-6.576,5.376481442386,-2.201198029505)); +#154999 = CARTESIAN_POINT('',(-6.575,5.376481442386,-2.201198029505)); +#155000 = CARTESIAN_POINT('',(-6.576,5.298398113111,-2.247469574834)); +#155001 = CARTESIAN_POINT('',(-6.575,5.298398113111,-2.247469574834)); +#155002 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#155003 = CARTESIAN_POINT('',(-6.575,5.208746925084,-2.270605347499)); +#155004 = ADVANCED_FACE('',(#155005),#155016,.F.); +#155005 = FACE_BOUND('',#155006,.F.); +#155006 = EDGE_LOOP('',(#155007,#155008,#155009,#155015)); +#155007 = ORIENTED_EDGE('',*,*,#154989,.F.); +#155008 = ORIENTED_EDGE('',*,*,#154235,.T.); +#155009 = ORIENTED_EDGE('',*,*,#155010,.T.); +#155010 = EDGE_CURVE('',#154236,#154664,#155011,.T.); +#155011 = LINE('',#155012,#155013); +#155012 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#155013 = VECTOR('',#155014,1.); +#155014 = DIRECTION('',(1.,-0.,-0.)); +#155015 = ORIENTED_EDGE('',*,*,#154672,.F.); +#155016 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155017,#155018) + ,(#155019,#155020) + ,(#155021,#155022) + ,(#155023,#155024 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(9.,10.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155017 = CARTESIAN_POINT('',(-6.576,5.208746925084,-2.270605347499)); +#155018 = CARTESIAN_POINT('',(-6.575,5.208746925084,-2.270605347499)); +#155019 = CARTESIAN_POINT('',(-6.576,5.171151253133,-2.386284321147)); +#155020 = CARTESIAN_POINT('',(-6.575,5.171151253133,-2.386284321147)); +#155021 = CARTESIAN_POINT('',(-6.576,5.061256250233,-2.467259580634)); +#155022 = CARTESIAN_POINT('',(-6.575,5.061256250233,-2.467259580634)); +#155023 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#155024 = CARTESIAN_POINT('',(-6.575,4.934009335094,-2.467259580634)); +#155025 = ADVANCED_FACE('',(#155026),#155037,.F.); +#155026 = FACE_BOUND('',#155027,.F.); +#155027 = EDGE_LOOP('',(#155028,#155029,#155030,#155036)); +#155028 = ORIENTED_EDGE('',*,*,#155010,.F.); +#155029 = ORIENTED_EDGE('',*,*,#154244,.T.); +#155030 = ORIENTED_EDGE('',*,*,#155031,.T.); +#155031 = EDGE_CURVE('',#154245,#154655,#155032,.T.); +#155032 = LINE('',#155033,#155034); +#155033 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#155034 = VECTOR('',#155035,1.); +#155035 = DIRECTION('',(1.,-0.,-0.)); +#155036 = ORIENTED_EDGE('',*,*,#154663,.F.); +#155037 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155038,#155039) + ,(#155040,#155041) + ,(#155042,#155043) + ,(#155044,#155045 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(10.,11.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155038 = CARTESIAN_POINT('',(-6.576,4.934009335094,-2.467259580634)); +#155039 = CARTESIAN_POINT('',(-6.575,4.934009335094,-2.467259580634)); +#155040 = CARTESIAN_POINT('',(-6.576,4.774950746331,-2.467259580634)); +#155041 = CARTESIAN_POINT('',(-6.575,4.774950746331,-2.467259580634)); +#155042 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.337120735283)); +#155043 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.337120735283)); +#155044 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#155045 = CARTESIAN_POINT('',(-6.575,4.644811900978,-2.17806214652)); +#155046 = ADVANCED_FACE('',(#155047),#155058,.F.); +#155047 = FACE_BOUND('',#155048,.T.); +#155048 = EDGE_LOOP('',(#155049,#155050,#155056,#155057)); +#155049 = ORIENTED_EDGE('',*,*,#154654,.T.); +#155050 = ORIENTED_EDGE('',*,*,#155051,.F.); +#155051 = EDGE_CURVE('',#154254,#154647,#155052,.T.); +#155052 = LINE('',#155053,#155054); +#155053 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.149142403106)); +#155054 = VECTOR('',#155055,1.); +#155055 = DIRECTION('',(1.,-0.,-0.)); +#155056 = ORIENTED_EDGE('',*,*,#154253,.F.); +#155057 = ORIENTED_EDGE('',*,*,#155031,.T.); +#155058 = PLANE('',#155059); +#155059 = AXIS2_PLACEMENT_3D('',#155060,#155061,#155062); +#155060 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.17806214652)); +#155061 = DIRECTION('',(0.,1.,-0.)); +#155062 = DIRECTION('',(0.,0.,1.)); +#155063 = ADVANCED_FACE('',(#155064),#155075,.F.); +#155064 = FACE_BOUND('',#155065,.T.); +#155065 = EDGE_LOOP('',(#155066,#155067,#155073,#155074)); +#155066 = ORIENTED_EDGE('',*,*,#154646,.T.); +#155067 = ORIENTED_EDGE('',*,*,#155068,.F.); +#155068 = EDGE_CURVE('',#154263,#154639,#155069,.T.); +#155069 = LINE('',#155070,#155071); +#155070 = CARTESIAN_POINT('',(-6.576,4.239935493218,-1.935136312894)); +#155071 = VECTOR('',#155072,1.); +#155072 = DIRECTION('',(1.,-0.,-0.)); +#155073 = ORIENTED_EDGE('',*,*,#154262,.F.); +#155074 = ORIENTED_EDGE('',*,*,#155051,.T.); +#155075 = PLANE('',#155076); +#155076 = AXIS2_PLACEMENT_3D('',#155077,#155078,#155079); +#155077 = CARTESIAN_POINT('',(-6.576,4.644811900978,-2.149142403106)); +#155078 = DIRECTION('',(0.,0.467307306755,0.884094950248)); +#155079 = DIRECTION('',(0.,-0.884094950248,0.467307306755)); +#155080 = ADVANCED_FACE('',(#155081),#155092,.F.); +#155081 = FACE_BOUND('',#155082,.T.); +#155082 = EDGE_LOOP('',(#155083,#155084,#155090,#155091)); +#155083 = ORIENTED_EDGE('',*,*,#154638,.T.); +#155084 = ORIENTED_EDGE('',*,*,#155085,.F.); +#155085 = EDGE_CURVE('',#154271,#154631,#155086,.T.); +#155086 = LINE('',#155087,#155088); +#155087 = CARTESIAN_POINT('',(-6.576,4.329586653666,-1.781861639718)); +#155088 = VECTOR('',#155089,1.); +#155089 = DIRECTION('',(1.,-0.,-0.)); +#155090 = ORIENTED_EDGE('',*,*,#154270,.F.); +#155091 = ORIENTED_EDGE('',*,*,#155068,.T.); +#155092 = PLANE('',#155093); +#155093 = AXIS2_PLACEMENT_3D('',#155094,#155095,#155096); +#155094 = CARTESIAN_POINT('',(-6.576,4.239935493218,-1.935136312894)); +#155095 = DIRECTION('',(0.,0.863187758941,-0.50488304865)); +#155096 = DIRECTION('',(0.,0.50488304865,0.863187758941)); +#155097 = ADVANCED_FACE('',(#155098),#155109,.F.); +#155098 = FACE_BOUND('',#155099,.T.); +#155099 = EDGE_LOOP('',(#155100,#155101,#155107,#155108)); +#155100 = ORIENTED_EDGE('',*,*,#154630,.T.); +#155101 = ORIENTED_EDGE('',*,*,#155102,.F.); +#155102 = EDGE_CURVE('',#154279,#154622,#155103,.T.); +#155103 = LINE('',#155104,#155105); +#155104 = CARTESIAN_POINT('',(-6.576,4.717111204347,-1.984299843598)); +#155105 = VECTOR('',#155106,1.); +#155106 = DIRECTION('',(1.,-0.,-0.)); +#155107 = ORIENTED_EDGE('',*,*,#154278,.F.); +#155108 = ORIENTED_EDGE('',*,*,#155085,.T.); +#155109 = PLANE('',#155110); +#155110 = AXIS2_PLACEMENT_3D('',#155111,#155112,#155113); +#155111 = CARTESIAN_POINT('',(-6.576,4.329586653666,-1.781861639718)); +#155112 = DIRECTION('',(0.,-0.463018065387,-0.886348842796)); +#155113 = DIRECTION('',(0.,0.886348842796,-0.463018065387)); +#155114 = ADVANCED_FACE('',(#155115),#155126,.F.); +#155115 = FACE_BOUND('',#155116,.F.); +#155116 = EDGE_LOOP('',(#155117,#155118,#155119,#155125)); +#155117 = ORIENTED_EDGE('',*,*,#155102,.F.); +#155118 = ORIENTED_EDGE('',*,*,#154286,.T.); +#155119 = ORIENTED_EDGE('',*,*,#155120,.T.); +#155120 = EDGE_CURVE('',#154287,#154613,#155121,.T.); +#155121 = LINE('',#155122,#155123); +#155122 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#155123 = VECTOR('',#155124,1.); +#155124 = DIRECTION('',(1.,-0.,-0.)); +#155125 = ORIENTED_EDGE('',*,*,#154621,.F.); +#155126 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155127,#155128) + ,(#155129,#155130) + ,(#155131,#155132) + ,(#155133,#155134 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(15.,16.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155127 = CARTESIAN_POINT('',(-6.576,4.717111204347,-1.984299843598)); +#155128 = CARTESIAN_POINT('',(-6.575,4.717111204347,-1.984299843598)); +#155129 = CARTESIAN_POINT('',(-6.576,4.769166720425,-1.923568371401)); +#155130 = CARTESIAN_POINT('',(-6.575,4.769166720425,-1.923568371401)); +#155131 = CARTESIAN_POINT('',(-6.576,4.847250049699,-1.885972727031)); +#155132 = CARTESIAN_POINT('',(-6.575,4.847250049699,-1.885972727031)); +#155133 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#155134 = CARTESIAN_POINT('',(-6.575,4.934009279934,-1.885972727031)); +#155135 = ADVANCED_FACE('',(#155136),#155147,.F.); +#155136 = FACE_BOUND('',#155137,.F.); +#155137 = EDGE_LOOP('',(#155138,#155139,#155140,#155146)); +#155138 = ORIENTED_EDGE('',*,*,#155120,.F.); +#155139 = ORIENTED_EDGE('',*,*,#154295,.T.); +#155140 = ORIENTED_EDGE('',*,*,#155141,.T.); +#155141 = EDGE_CURVE('',#154296,#154604,#155142,.T.); +#155142 = LINE('',#155143,#155144); +#155143 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#155144 = VECTOR('',#155145,1.); +#155145 = DIRECTION('',(1.,-0.,-0.)); +#155146 = ORIENTED_EDGE('',*,*,#154612,.F.); +#155147 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155148,#155149) + ,(#155150,#155151) + ,(#155152,#155153) + ,(#155154,#155155 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(16.,17.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155148 = CARTESIAN_POINT('',(-6.576,4.934009279934,-1.885972727031)); +#155149 = CARTESIAN_POINT('',(-6.575,4.934009279934,-1.885972727031)); +#155150 = CARTESIAN_POINT('',(-6.576,5.058364209699,-1.885972727031)); +#155151 = CARTESIAN_POINT('',(-6.575,5.058364209699,-1.885972727031)); +#155152 = CARTESIAN_POINT('',(-6.576,5.165367227225,-1.966947986517)); +#155153 = CARTESIAN_POINT('',(-6.575,5.165367227225,-1.966947986517)); +#155154 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#155155 = CARTESIAN_POINT('',(-6.575,5.20585485697,-2.076843044577)); +#155156 = ADVANCED_FACE('',(#155157),#155168,.F.); +#155157 = FACE_BOUND('',#155158,.F.); +#155158 = EDGE_LOOP('',(#155159,#155160,#155161,#155167)); +#155159 = ORIENTED_EDGE('',*,*,#155141,.F.); +#155160 = ORIENTED_EDGE('',*,*,#154304,.T.); +#155161 = ORIENTED_EDGE('',*,*,#155162,.T.); +#155162 = EDGE_CURVE('',#154305,#154595,#155163,.T.); +#155163 = LINE('',#155164,#155165); +#155164 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#155165 = VECTOR('',#155166,1.); +#155166 = DIRECTION('',(1.,-0.,-0.)); +#155167 = ORIENTED_EDGE('',*,*,#154603,.F.); +#155168 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155169,#155170) + ,(#155171,#155172) + ,(#155173,#155174) + ,(#155175,#155176 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(17.,18.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155169 = CARTESIAN_POINT('',(-6.576,5.20585485697,-2.076843044577)); +#155170 = CARTESIAN_POINT('',(-6.575,5.20585485697,-2.076843044577)); +#155171 = CARTESIAN_POINT('',(-6.576,5.307073958909,-2.030571444089)); +#155172 = CARTESIAN_POINT('',(-6.575,5.307073958909,-2.030571444089)); +#155173 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.929352342149)); +#155174 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.929352342149)); +#155175 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#155176 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.810781383129)); +#155177 = ADVANCED_FACE('',(#155178),#155189,.F.); +#155178 = FACE_BOUND('',#155179,.F.); +#155179 = EDGE_LOOP('',(#155180,#155181,#155182,#155188)); +#155180 = ORIENTED_EDGE('',*,*,#155162,.F.); +#155181 = ORIENTED_EDGE('',*,*,#154313,.T.); +#155182 = ORIENTED_EDGE('',*,*,#155183,.T.); +#155183 = EDGE_CURVE('',#154314,#154586,#155184,.T.); +#155184 = LINE('',#155185,#155186); +#155185 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#155186 = VECTOR('',#155187,1.); +#155187 = DIRECTION('',(1.,-0.,-0.)); +#155188 = ORIENTED_EDGE('',*,*,#154594,.F.); +#155189 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155190,#155191) + ,(#155192,#155193) + ,(#155194,#155195) + ,(#155196,#155197 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(18.,19.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155190 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.810781383129)); +#155191 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.810781383129)); +#155192 = CARTESIAN_POINT('',(-6.576,5.379373317439,-1.651722794365)); +#155193 = CARTESIAN_POINT('',(-6.575,5.379373317439,-1.651722794365)); +#155194 = CARTESIAN_POINT('',(-6.576,5.249234472087,-1.521583949015)); +#155195 = CARTESIAN_POINT('',(-6.575,5.249234472087,-1.521583949015)); +#155196 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#155197 = CARTESIAN_POINT('',(-6.575,5.090175883325,-1.521583949015)); +#155198 = ADVANCED_FACE('',(#155199),#155210,.F.); +#155199 = FACE_BOUND('',#155200,.F.); +#155200 = EDGE_LOOP('',(#155201,#155202,#155203,#155209)); +#155201 = ORIENTED_EDGE('',*,*,#155183,.F.); +#155202 = ORIENTED_EDGE('',*,*,#154322,.T.); +#155203 = ORIENTED_EDGE('',*,*,#155204,.T.); +#155204 = EDGE_CURVE('',#154323,#154577,#155205,.T.); +#155205 = LINE('',#155206,#155207); +#155206 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#155207 = VECTOR('',#155208,1.); +#155208 = DIRECTION('',(1.,-0.,-0.)); +#155209 = ORIENTED_EDGE('',*,*,#154585,.F.); +#155210 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155211,#155212) + ,(#155213,#155214) + ,(#155215,#155216) + ,(#155217,#155218 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(19.,20.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155211 = CARTESIAN_POINT('',(-6.576,5.090175883325,-1.521583949015)); +#155212 = CARTESIAN_POINT('',(-6.575,5.090175883325,-1.521583949015)); +#155213 = CARTESIAN_POINT('',(-6.576,5.035228381873,-1.521583949015)); +#155214 = CARTESIAN_POINT('',(-6.575,5.035228381873,-1.521583949015)); +#155215 = CARTESIAN_POINT('',(-6.576,4.980280880423,-1.538935806093)); +#155216 = CARTESIAN_POINT('',(-6.575,4.980280880423,-1.538935806093)); +#155217 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#155218 = CARTESIAN_POINT('',(-6.575,4.936901265308,-1.564963564134)); +#155219 = ADVANCED_FACE('',(#155220),#155231,.F.); +#155220 = FACE_BOUND('',#155221,.F.); +#155221 = EDGE_LOOP('',(#155222,#155223,#155224,#155230)); +#155222 = ORIENTED_EDGE('',*,*,#155204,.F.); +#155223 = ORIENTED_EDGE('',*,*,#154331,.T.); +#155224 = ORIENTED_EDGE('',*,*,#155225,.T.); +#155225 = EDGE_CURVE('',#154332,#154568,#155226,.T.); +#155226 = LINE('',#155227,#155228); +#155227 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#155228 = VECTOR('',#155229,1.); +#155229 = DIRECTION('',(1.,-0.,-0.)); +#155230 = ORIENTED_EDGE('',*,*,#154576,.F.); +#155231 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155232,#155233) + ,(#155234,#155235) + ,(#155236,#155237) + ,(#155238,#155239 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(20.,21.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155232 = CARTESIAN_POINT('',(-6.576,4.936901265308,-1.564963564134)); +#155233 = CARTESIAN_POINT('',(-6.575,4.936901265308,-1.564963564134)); +#155234 = CARTESIAN_POINT('',(-6.576,4.881953819018,-1.403013155475)); +#155235 = CARTESIAN_POINT('',(-6.575,4.881953819018,-1.403013155475)); +#155236 = CARTESIAN_POINT('',(-6.576,4.731571131214,-1.28733418183)); +#155237 = CARTESIAN_POINT('',(-6.575,4.731571131214,-1.28733418183)); +#155238 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#155239 = CARTESIAN_POINT('',(-6.575,4.549376769785,-1.28733418183)); +#155240 = ADVANCED_FACE('',(#155241),#155252,.F.); +#155241 = FACE_BOUND('',#155242,.F.); +#155242 = EDGE_LOOP('',(#155243,#155244,#155245,#155251)); +#155243 = ORIENTED_EDGE('',*,*,#155225,.F.); +#155244 = ORIENTED_EDGE('',*,*,#154340,.T.); +#155245 = ORIENTED_EDGE('',*,*,#155246,.T.); +#155246 = EDGE_CURVE('',#154341,#154559,#155247,.T.); +#155247 = LINE('',#155248,#155249); +#155248 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#155249 = VECTOR('',#155250,1.); +#155250 = DIRECTION('',(1.,-0.,-0.)); +#155251 = ORIENTED_EDGE('',*,*,#154567,.F.); +#155252 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155253,#155254) + ,(#155255,#155256) + ,(#155257,#155258) + ,(#155259,#155260 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(21.,22.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155253 = CARTESIAN_POINT('',(-6.576,4.549376769785,-1.28733418183)); +#155254 = CARTESIAN_POINT('',(-6.575,4.549376769785,-1.28733418183)); +#155255 = CARTESIAN_POINT('',(-6.576,4.341154595158,-1.28733418183)); +#155256 = CARTESIAN_POINT('',(-6.575,4.341154595158,-1.28733418183)); +#155257 = CARTESIAN_POINT('',(-6.576,4.16763613469,-1.446392770593)); +#155258 = CARTESIAN_POINT('',(-6.575,4.16763613469,-1.446392770593)); +#155259 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#155260 = CARTESIAN_POINT('',(-6.575,4.144500362025,-1.648830974473)); +#155261 = ADVANCED_FACE('',(#155262),#155273,.F.); +#155262 = FACE_BOUND('',#155263,.T.); +#155263 = EDGE_LOOP('',(#155264,#155265,#155271,#155272)); +#155264 = ORIENTED_EDGE('',*,*,#154558,.T.); +#155265 = ORIENTED_EDGE('',*,*,#155266,.F.); +#155266 = EDGE_CURVE('',#154350,#154550,#155267,.T.); +#155267 = LINE('',#155268,#155269); +#155268 = CARTESIAN_POINT('',(-6.576,4.121364589359,-1.648830974473)); +#155269 = VECTOR('',#155270,1.); +#155270 = DIRECTION('',(1.,-0.,-0.)); +#155271 = ORIENTED_EDGE('',*,*,#154349,.F.); +#155272 = ORIENTED_EDGE('',*,*,#155246,.T.); +#155273 = PLANE('',#155274); +#155274 = AXIS2_PLACEMENT_3D('',#155275,#155276,#155277); +#155275 = CARTESIAN_POINT('',(-6.576,4.144500362025,-1.648830974473)); +#155276 = DIRECTION('',(0.,1.874503502708E-14,1.)); +#155277 = DIRECTION('',(0.,-1.,1.874503502708E-14)); +#155278 = ADVANCED_FACE('',(#155279),#155290,.F.); +#155279 = FACE_BOUND('',#155280,.F.); +#155280 = EDGE_LOOP('',(#155281,#155282,#155283,#155289)); +#155281 = ORIENTED_EDGE('',*,*,#155266,.F.); +#155282 = ORIENTED_EDGE('',*,*,#154358,.T.); +#155283 = ORIENTED_EDGE('',*,*,#155284,.T.); +#155284 = EDGE_CURVE('',#154359,#154541,#155285,.T.); +#155285 = LINE('',#155286,#155287); +#155286 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#155287 = VECTOR('',#155288,1.); +#155288 = DIRECTION('',(1.,-0.,-0.)); +#155289 = ORIENTED_EDGE('',*,*,#154549,.F.); +#155290 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155291,#155292) + ,(#155293,#155294) + ,(#155295,#155296) + ,(#155297,#155298 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(23.,24.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155291 = CARTESIAN_POINT('',(-6.576,4.121364589359,-1.648830974473)); +#155292 = CARTESIAN_POINT('',(-6.575,4.121364589359,-1.648830974473)); +#155293 = CARTESIAN_POINT('',(-6.576,3.997009714754,-1.648830974473)); +#155294 = CARTESIAN_POINT('',(-6.575,3.997009714754,-1.648830974473)); +#155295 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.750050076413)); +#155296 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.750050076413)); +#155297 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#155298 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.874404951018)); +#155299 = ADVANCED_FACE('',(#155300),#155311,.F.); +#155300 = FACE_BOUND('',#155301,.F.); +#155301 = EDGE_LOOP('',(#155302,#155303,#155304,#155310)); +#155302 = ORIENTED_EDGE('',*,*,#155284,.F.); +#155303 = ORIENTED_EDGE('',*,*,#154367,.T.); +#155304 = ORIENTED_EDGE('',*,*,#155305,.T.); +#155305 = EDGE_CURVE('',#154368,#154533,#155306,.T.); +#155306 = LINE('',#155307,#155308); +#155307 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#155308 = VECTOR('',#155309,1.); +#155309 = DIRECTION('',(1.,-0.,-0.)); +#155310 = ORIENTED_EDGE('',*,*,#154540,.F.); +#155311 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155312,#155313) + ,(#155314,#155315) + ,(#155316,#155317) + ,(#155318,#155319 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(24.,25.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155312 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.874404951018)); +#155313 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.874404951018)); +#155314 = CARTESIAN_POINT('',(-6.576,3.895790612814,-1.992975910038)); +#155315 = CARTESIAN_POINT('',(-6.575,3.895790612814,-1.992975910038)); +#155316 = CARTESIAN_POINT('',(-6.576,3.985441773263,-2.091303026603)); +#155317 = CARTESIAN_POINT('',(-6.575,3.985441773263,-2.091303026603)); +#155318 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#155319 = CARTESIAN_POINT('',(-6.575,4.10401278744,-2.099978927563)); +#155320 = ADVANCED_FACE('',(#155321),#155332,.F.); +#155321 = FACE_BOUND('',#155322,.T.); +#155322 = EDGE_LOOP('',(#155323,#155324,#155330,#155331)); +#155323 = ORIENTED_EDGE('',*,*,#154532,.T.); +#155324 = ORIENTED_EDGE('',*,*,#155325,.F.); +#155325 = EDGE_CURVE('',#154377,#154524,#155326,.T.); +#155326 = LINE('',#155327,#155328); +#155327 = CARTESIAN_POINT('',(-6.576,4.234151632792,-2.099978927563)); +#155328 = VECTOR('',#155329,1.); +#155329 = DIRECTION('',(1.,-0.,-0.)); +#155330 = ORIENTED_EDGE('',*,*,#154376,.F.); +#155331 = ORIENTED_EDGE('',*,*,#155305,.T.); +#155332 = PLANE('',#155333); +#155333 = AXIS2_PLACEMENT_3D('',#155334,#155335,#155336); +#155334 = CARTESIAN_POINT('',(-6.576,4.10401278744,-2.099978927563)); +#155335 = DIRECTION('',(0.,-9.997342480386E-15,-1.)); +#155336 = DIRECTION('',(0.,1.,-9.997342480386E-15)); +#155337 = ADVANCED_FACE('',(#155338),#155349,.F.); +#155338 = FACE_BOUND('',#155339,.F.); +#155339 = EDGE_LOOP('',(#155340,#155341,#155342,#155348)); +#155340 = ORIENTED_EDGE('',*,*,#155325,.F.); +#155341 = ORIENTED_EDGE('',*,*,#154384,.T.); +#155342 = ORIENTED_EDGE('',*,*,#155343,.T.); +#155343 = EDGE_CURVE('',#154385,#154515,#155344,.T.); +#155344 = LINE('',#155345,#155346); +#155345 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#155346 = VECTOR('',#155347,1.); +#155347 = DIRECTION('',(1.,-0.,-0.)); +#155348 = ORIENTED_EDGE('',*,*,#154523,.F.); +#155349 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155350,#155351) + ,(#155352,#155353) + ,(#155354,#155355) + ,(#155356,#155357 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(26.,27.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155350 = CARTESIAN_POINT('',(-6.576,4.234151632792,-2.099978927563)); +#155351 = CARTESIAN_POINT('',(-6.575,4.234151632792,-2.099978927563)); +#155352 = CARTESIAN_POINT('',(-6.576,4.239935603538,-2.099978927563)); +#155353 = CARTESIAN_POINT('',(-6.575,4.239935603538,-2.099978927563)); +#155354 = CARTESIAN_POINT('',(-6.576,4.245719574285,-2.09708699735)); +#155355 = CARTESIAN_POINT('',(-6.575,4.245719574285,-2.09708699735)); +#155356 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#155357 = CARTESIAN_POINT('',(-6.575,4.251503434711,-2.09708699735)); +#155358 = ADVANCED_FACE('',(#155359),#155370,.F.); +#155359 = FACE_BOUND('',#155360,.F.); +#155360 = EDGE_LOOP('',(#155361,#155362,#155363,#155369)); +#155361 = ORIENTED_EDGE('',*,*,#155343,.F.); +#155362 = ORIENTED_EDGE('',*,*,#154393,.T.); +#155363 = ORIENTED_EDGE('',*,*,#155364,.T.); +#155364 = EDGE_CURVE('',#154394,#154506,#155365,.T.); +#155365 = LINE('',#155366,#155367); +#155366 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#155367 = VECTOR('',#155368,1.); +#155368 = DIRECTION('',(1.,-0.,-0.)); +#155369 = ORIENTED_EDGE('',*,*,#154514,.F.); +#155370 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155371,#155372) + ,(#155373,#155374) + ,(#155375,#155376) + ,(#155377,#155378 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(27.,28.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155371 = CARTESIAN_POINT('',(-6.576,4.251503434711,-2.09708699735)); +#155372 = CARTESIAN_POINT('',(-6.575,4.251503434711,-2.09708699735)); +#155373 = CARTESIAN_POINT('',(-6.576,4.300667020575,-2.09708699735)); +#155374 = CARTESIAN_POINT('',(-6.575,4.300667020575,-2.09708699735)); +#155375 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.137574682254)); +#155376 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.137574682254)); +#155377 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#155378 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.186738157797)); +#155379 = ADVANCED_FACE('',(#155380),#155391,.F.); +#155380 = FACE_BOUND('',#155381,.F.); +#155381 = EDGE_LOOP('',(#155382,#155383,#155384,#155390)); +#155382 = ORIENTED_EDGE('',*,*,#155364,.F.); +#155383 = ORIENTED_EDGE('',*,*,#154402,.T.); +#155384 = ORIENTED_EDGE('',*,*,#155385,.T.); +#155385 = EDGE_CURVE('',#154403,#154498,#155386,.T.); +#155386 = LINE('',#155387,#155388); +#155387 = CARTESIAN_POINT('',(-6.576,4.257287295137,-2.276389318247)); +#155388 = VECTOR('',#155389,1.); +#155389 = DIRECTION('',(1.,-0.,-0.)); +#155390 = ORIENTED_EDGE('',*,*,#154505,.F.); +#155391 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155392,#155393) + ,(#155394,#155395) + ,(#155396,#155397) + ,(#155398,#155399 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(28.,29.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155392 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.186738157797)); +#155393 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.186738157797)); +#155394 = CARTESIAN_POINT('',(-6.576,4.341154595158,-2.233009703128)); +#155395 = CARTESIAN_POINT('',(-6.575,4.341154595158,-2.233009703128)); +#155396 = CARTESIAN_POINT('',(-6.576,4.303558950788,-2.273497388035)); +#155397 = CARTESIAN_POINT('',(-6.575,4.303558950788,-2.273497388035)); +#155398 = CARTESIAN_POINT('',(-6.576,4.257287295137,-2.276389318247)); +#155399 = CARTESIAN_POINT('',(-6.575,4.257287295137,-2.276389318247)); +#155400 = ADVANCED_FACE('',(#155401),#155412,.F.); +#155401 = FACE_BOUND('',#155402,.T.); +#155402 = EDGE_LOOP('',(#155403,#155404,#155410,#155411)); +#155403 = ORIENTED_EDGE('',*,*,#154497,.T.); +#155404 = ORIENTED_EDGE('',*,*,#155405,.F.); +#155405 = EDGE_CURVE('',#154412,#154489,#155406,.T.); +#155406 = LINE('',#155407,#155408); +#155407 = CARTESIAN_POINT('',(-6.576,4.086660875201,-2.276389318247)); +#155408 = VECTOR('',#155409,1.); +#155409 = DIRECTION('',(1.,-0.,-0.)); +#155410 = ORIENTED_EDGE('',*,*,#154411,.F.); +#155411 = ORIENTED_EDGE('',*,*,#155385,.T.); +#155412 = PLANE('',#155413); +#155413 = AXIS2_PLACEMENT_3D('',#155414,#155415,#155416); +#155414 = CARTESIAN_POINT('',(-6.576,4.095336776161,-2.276389318247)); +#155415 = DIRECTION('',(0.,4.998683952027E-14,1.)); +#155416 = DIRECTION('',(0.,-1.,4.998683952027E-14)); +#155417 = ADVANCED_FACE('',(#155418),#155429,.F.); +#155418 = FACE_BOUND('',#155419,.F.); +#155419 = EDGE_LOOP('',(#155420,#155421,#155422,#155428)); +#155420 = ORIENTED_EDGE('',*,*,#155405,.F.); +#155421 = ORIENTED_EDGE('',*,*,#154419,.T.); +#155422 = ORIENTED_EDGE('',*,*,#155423,.T.); +#155423 = EDGE_CURVE('',#154420,#154480,#155424,.T.); +#155424 = LINE('',#155425,#155426); +#155425 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#155426 = VECTOR('',#155427,1.); +#155427 = DIRECTION('',(1.,-0.,-0.)); +#155428 = ORIENTED_EDGE('',*,*,#154488,.F.); +#155429 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155430,#155431) + ,(#155432,#155433) + ,(#155434,#155435) + ,(#155436,#155437 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(33.,34.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155430 = CARTESIAN_POINT('',(-6.576,4.086660875201,-2.276389318247)); +#155431 = CARTESIAN_POINT('',(-6.575,4.086660875201,-2.276389318247)); +#155432 = CARTESIAN_POINT('',(-6.576,3.985441773263,-2.267713417287)); +#155433 = CARTESIAN_POINT('',(-6.575,3.985441773263,-2.267713417287)); +#155434 = CARTESIAN_POINT('',(-6.576,3.89289857228,-2.221441761636)); +#155435 = CARTESIAN_POINT('',(-6.575,3.89289857228,-2.221441761636)); +#155436 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#155437 = CARTESIAN_POINT('',(-6.575,3.823491254286,-2.146250472894)); +#155438 = ADVANCED_FACE('',(#155439),#155445,.F.); +#155439 = FACE_BOUND('',#155440,.F.); +#155440 = EDGE_LOOP('',(#155441,#155442,#155443,#155444)); +#155441 = ORIENTED_EDGE('',*,*,#155423,.F.); +#155442 = ORIENTED_EDGE('',*,*,#154428,.T.); +#155443 = ORIENTED_EDGE('',*,*,#154793,.T.); +#155444 = ORIENTED_EDGE('',*,*,#154479,.F.); +#155445 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155446,#155447) + ,(#155448,#155449) + ,(#155450,#155451) + ,(#155452,#155453 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(2,2),(34.,35.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155446 = CARTESIAN_POINT('',(-6.576,3.823491254286,-2.146250472894)); +#155447 = CARTESIAN_POINT('',(-6.575,3.823491254286,-2.146250472894)); +#155448 = CARTESIAN_POINT('',(-6.576,3.75408382597,-2.071059184152)); +#155449 = CARTESIAN_POINT('',(-6.575,3.75408382597,-2.071059184152)); +#155450 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.972732012425)); +#155451 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.972732012425)); +#155452 = CARTESIAN_POINT('',(-6.576,3.716488181599,-1.871512910485)); +#155453 = CARTESIAN_POINT('',(-6.575,3.716488181599,-1.871512910485)); +#155454 = ADVANCED_FACE('',(#155455),#155471,.T.); +#155455 = FACE_BOUND('',#155456,.T.); +#155456 = EDGE_LOOP('',(#155457,#155458,#155464,#155465)); +#155457 = ORIENTED_EDGE('',*,*,#154775,.F.); +#155458 = ORIENTED_EDGE('',*,*,#155459,.F.); +#155459 = EDGE_CURVE('',#154438,#154765,#155460,.T.); +#155460 = LINE('',#155461,#155462); +#155461 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#155462 = VECTOR('',#155463,1.); +#155463 = DIRECTION('',(1.,-0.,-0.)); +#155464 = ORIENTED_EDGE('',*,*,#154437,.T.); +#155465 = ORIENTED_EDGE('',*,*,#155466,.T.); +#155466 = EDGE_CURVE('',#154440,#154763,#155467,.T.); +#155467 = LINE('',#155468,#155469); +#155468 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#155469 = VECTOR('',#155470,1.); +#155470 = DIRECTION('',(1.,-0.,-0.)); +#155471 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155472,#155473) + ,(#155474,#155475) + ,(#155476,#155477) + ,(#155478,#155479) + ,(#155480,#155481) + ,(#155482,#155483) + ,(#155484,#155485 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,3,4),(2,2),(0.,1.,2.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#155472 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#155473 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.293741340805)); +#155474 = CARTESIAN_POINT('',(-6.576,4.873277918059,-2.293741340805)); +#155475 = CARTESIAN_POINT('',(-6.575,4.873277918059,-2.293741340805)); +#155476 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.241685714409)); +#155477 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.241685714409)); +#155478 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.180954297372)); +#155479 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.180954297372)); +#155480 = CARTESIAN_POINT('',(-6.576,4.824114332195,-2.117330839803)); +#155481 = CARTESIAN_POINT('',(-6.575,4.824114332195,-2.117330839803)); +#155482 = CARTESIAN_POINT('',(-6.576,4.876169848271,-2.06816725394)); +#155483 = CARTESIAN_POINT('',(-6.575,4.876169848271,-2.06816725394)); +#155484 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#155485 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.06816725394)); +#155486 = ADVANCED_FACE('',(#155487),#155493,.T.); +#155487 = FACE_BOUND('',#155488,.T.); +#155488 = EDGE_LOOP('',(#155489,#155490,#155491,#155492)); +#155489 = ORIENTED_EDGE('',*,*,#154762,.F.); +#155490 = ORIENTED_EDGE('',*,*,#155466,.F.); +#155491 = ORIENTED_EDGE('',*,*,#154451,.T.); +#155492 = ORIENTED_EDGE('',*,*,#155459,.T.); +#155493 = B_SPLINE_SURFACE_WITH_KNOTS('',3,1,( + (#155494,#155495) + ,(#155496,#155497) + ,(#155498,#155499) + ,(#155500,#155501) + ,(#155502,#155503) + ,(#155504,#155505 + )),.UNSPECIFIED.,.F.,.F.,.F.,(4,2,4),(2,2),(2.,3.,4.),(0.,1.), + .UNSPECIFIED.); +#155494 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.06816725394)); +#155495 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.06816725394)); +#155496 = CARTESIAN_POINT('',(-6.576,4.997632792663,-2.06816725394)); +#155497 = CARTESIAN_POINT('',(-6.575,4.997632792663,-2.06816725394)); +#155498 = CARTESIAN_POINT('',(-6.576,5.04968830874,-2.117330839803)); +#155499 = CARTESIAN_POINT('',(-6.575,5.04968830874,-2.117330839803)); +#155500 = CARTESIAN_POINT('',(-6.576,5.04968830874,-2.244577754941)); +#155501 = CARTESIAN_POINT('',(-6.575,5.04968830874,-2.244577754941)); +#155502 = CARTESIAN_POINT('',(-6.576,4.997632792663,-2.293741340805)); +#155503 = CARTESIAN_POINT('',(-6.575,4.997632792663,-2.293741340805)); +#155504 = CARTESIAN_POINT('',(-6.576,4.936901320468,-2.293741340805)); +#155505 = CARTESIAN_POINT('',(-6.575,4.936901320468,-2.293741340805)); +#155506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#155510)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#155507,#155508,#155509)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#155507 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#155508 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#155509 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#155510 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-06),#155507, + 'distance_accuracy_value','confusion accuracy'); +#155511 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155512,#155514); +#155512 = ( REPRESENTATION_RELATIONSHIP('','',#104787,#104764) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155513) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155513 = ITEM_DEFINED_TRANSFORMATION('','',#11,#104765); +#155514 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155515); +#155515 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','=>[0:1:1:30]','',#104759, + #104782,$); +#155516 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#104784)); +#155517 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155518,#155520); +#155518 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155519) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155519 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#155520 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155521); +#155521 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','C_DBNC1','',#5,#32437,$); +#155522 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155523,#155525); +#155523 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155524) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155524 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#155525 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155526); +#155526 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','R_RGB1','',#5,#31605,$); +#155527 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155528,#155530); +#155528 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155529) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155529 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#155530 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155531); +#155531 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','R_CC1','',#5,#31605,$); +#155532 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155533,#155535); +#155533 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155534) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155534 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#155535 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155536); +#155536 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','C_3V3_2','',#5,#32437,$); +#155537 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155538,#155540); +#155538 = ( REPRESENTATION_RELATIONSHIP('','',#73044,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155539) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155539 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#155540 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155541); +#155541 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('50','C_3V3_1','',#5,#73039,$); +#155542 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155543,#155545); +#155543 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155544) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155544 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#155545 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155546); +#155546 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('51','R_VSYS1','',#5,#31605,$); +#155547 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155548,#155550); +#155548 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155549) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155549 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#155550 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155551); +#155551 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('52','R_USB_DP1','',#5,#31605,$ + ); +#155552 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155553,#155555); +#155553 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155554) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155554 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#155555 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155556); +#155556 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('53','SW_THR_DN1','',#5,#13558, + $); +#155557 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155558,#155560); +#155558 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155559) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155559 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#155560 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155561); +#155561 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','C_XBEE_VCC3','',#5,#32437 + ,$); +#155562 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155563,#155565); +#155563 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155564) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155564 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#155565 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155566); +#155566 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('55','SW_VOL_UP1','',#5,#13558, + $); +#155567 = SHAPE_DEFINITION_REPRESENTATION(#155568,#155574); +#155568 = PRODUCT_DEFINITION_SHAPE('','',#155569); +#155569 = PRODUCT_DEFINITION('design','',#155570,#155573); +#155570 = PRODUCT_DEFINITION_FORMATION('','',#155571); +#155571 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#155572)); +#155572 = PRODUCT_CONTEXT('',#2,'mechanical'); +#155573 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#155574 = SHAPE_REPRESENTATION('',(#11,#155575),#155579); +#155575 = AXIS2_PLACEMENT_3D('',#155576,#155577,#155578); +#155576 = CARTESIAN_POINT('',(0.,0.,0.)); +#155577 = DIRECTION('',(0.,0.,1.)); +#155578 = DIRECTION('',(1.,0.,-0.)); +#155579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#155583)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#155580,#155581,#155582)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#155580 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#155581 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#155582 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#155583 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#155580, + 'distance_accuracy_value','confusion accuracy'); +#155584 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#155585,#155587); +#155585 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#155586) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#155586 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#155587 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #155588); +#155588 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('57','C_OLED_1','',#5,#155569,$ + ); +#155589 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#155571)); +#155590 = SHAPE_DEFINITION_REPRESENTATION(#155591,#155597); +#155591 = PRODUCT_DEFINITION_SHAPE('','',#155592); +#155592 = PRODUCT_DEFINITION('design','',#155593,#155596); +#155593 = PRODUCT_DEFINITION_FORMATION('','',#155594); +#155594 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#155595)); +#155595 = PRODUCT_CONTEXT('',#2,'mechanical'); +#155596 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#155597 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#155598),#156452); +#155598 = MANIFOLD_SOLID_BREP('',#155599); +#155599 = CLOSED_SHELL('',(#155600,#155676,#155707,#155732,#155757, + #155781,#155805,#155830,#155855,#155872,#155958,#155990,#156014, + #156039,#156063,#156088,#156112,#156137,#156154,#156240,#156271, + #156296,#156321,#156345,#156369,#156394,#156419,#156436)); +#155600 = ADVANCED_FACE('',(#155601),#155671,.F.); +#155601 = FACE_BOUND('',#155602,.F.); +#155602 = EDGE_LOOP('',(#155603,#155613,#155622,#155630,#155639,#155647, + #155656,#155664)); +#155603 = ORIENTED_EDGE('',*,*,#155604,.F.); +#155604 = EDGE_CURVE('',#155605,#155607,#155609,.T.); +#155605 = VERTEX_POINT('',#155606); +#155606 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#155607 = VERTEX_POINT('',#155608); +#155608 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#155609 = LINE('',#155610,#155611); +#155610 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#155611 = VECTOR('',#155612,1.); +#155612 = DIRECTION('',(0.,0.,1.)); +#155613 = ORIENTED_EDGE('',*,*,#155614,.T.); +#155614 = EDGE_CURVE('',#155605,#155615,#155617,.T.); +#155615 = VERTEX_POINT('',#155616); +#155616 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#155617 = CIRCLE('',#155618,4.E-02); +#155618 = AXIS2_PLACEMENT_3D('',#155619,#155620,#155621); +#155619 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#155620 = DIRECTION('',(1.,0.,-0.)); +#155621 = DIRECTION('',(0.,0.,1.)); +#155622 = ORIENTED_EDGE('',*,*,#155623,.T.); +#155623 = EDGE_CURVE('',#155615,#155624,#155626,.T.); +#155624 = VERTEX_POINT('',#155625); +#155625 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#155626 = LINE('',#155627,#155628); +#155627 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#155628 = VECTOR('',#155629,1.); +#155629 = DIRECTION('',(0.,1.,0.)); +#155630 = ORIENTED_EDGE('',*,*,#155631,.F.); +#155631 = EDGE_CURVE('',#155632,#155624,#155634,.T.); +#155632 = VERTEX_POINT('',#155633); +#155633 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#155634 = CIRCLE('',#155635,4.E-02); +#155635 = AXIS2_PLACEMENT_3D('',#155636,#155637,#155638); +#155636 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#155637 = DIRECTION('',(-1.,0.,0.)); +#155638 = DIRECTION('',(0.,0.,1.)); +#155639 = ORIENTED_EDGE('',*,*,#155640,.T.); +#155640 = EDGE_CURVE('',#155632,#155641,#155643,.T.); +#155641 = VERTEX_POINT('',#155642); +#155642 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#155643 = LINE('',#155644,#155645); +#155644 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#155645 = VECTOR('',#155646,1.); +#155646 = DIRECTION('',(0.,0.,1.)); +#155647 = ORIENTED_EDGE('',*,*,#155648,.T.); +#155648 = EDGE_CURVE('',#155641,#155649,#155651,.T.); +#155649 = VERTEX_POINT('',#155650); +#155650 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#155651 = CIRCLE('',#155652,4.E-02); +#155652 = AXIS2_PLACEMENT_3D('',#155653,#155654,#155655); +#155653 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#155654 = DIRECTION('',(1.,0.,-0.)); +#155655 = DIRECTION('',(0.,0.,1.)); +#155656 = ORIENTED_EDGE('',*,*,#155657,.F.); +#155657 = EDGE_CURVE('',#155658,#155649,#155660,.T.); +#155658 = VERTEX_POINT('',#155659); +#155659 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#155660 = LINE('',#155661,#155662); +#155661 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#155662 = VECTOR('',#155663,1.); +#155663 = DIRECTION('',(0.,1.,0.)); +#155664 = ORIENTED_EDGE('',*,*,#155665,.F.); +#155665 = EDGE_CURVE('',#155607,#155658,#155666,.T.); +#155666 = CIRCLE('',#155667,4.E-02); +#155667 = AXIS2_PLACEMENT_3D('',#155668,#155669,#155670); +#155668 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#155669 = DIRECTION('',(-1.,0.,0.)); +#155670 = DIRECTION('',(0.,0.,1.)); +#155671 = PLANE('',#155672); +#155672 = AXIS2_PLACEMENT_3D('',#155673,#155674,#155675); +#155673 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#155674 = DIRECTION('',(1.,0.,0.)); +#155675 = DIRECTION('',(0.,0.,1.)); +#155676 = ADVANCED_FACE('',(#155677),#155702,.F.); +#155677 = FACE_BOUND('',#155678,.F.); +#155678 = EDGE_LOOP('',(#155679,#155689,#155695,#155696)); +#155679 = ORIENTED_EDGE('',*,*,#155680,.F.); +#155680 = EDGE_CURVE('',#155681,#155683,#155685,.T.); +#155681 = VERTEX_POINT('',#155682); +#155682 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#155683 = VERTEX_POINT('',#155684); +#155684 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#155685 = LINE('',#155686,#155687); +#155686 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#155687 = VECTOR('',#155688,1.); +#155688 = DIRECTION('',(0.,0.,1.)); +#155689 = ORIENTED_EDGE('',*,*,#155690,.F.); +#155690 = EDGE_CURVE('',#155605,#155681,#155691,.T.); +#155691 = LINE('',#155692,#155693); +#155692 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#155693 = VECTOR('',#155694,1.); +#155694 = DIRECTION('',(1.,0.,0.)); +#155695 = ORIENTED_EDGE('',*,*,#155604,.T.); +#155696 = ORIENTED_EDGE('',*,*,#155697,.T.); +#155697 = EDGE_CURVE('',#155607,#155683,#155698,.T.); +#155698 = LINE('',#155699,#155700); +#155699 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#155700 = VECTOR('',#155701,1.); +#155701 = DIRECTION('',(1.,0.,0.)); +#155702 = PLANE('',#155703); +#155703 = AXIS2_PLACEMENT_3D('',#155704,#155705,#155706); +#155704 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#155705 = DIRECTION('',(0.,1.,0.)); +#155706 = DIRECTION('',(0.,-0.,1.)); +#155707 = ADVANCED_FACE('',(#155708),#155727,.T.); +#155708 = FACE_BOUND('',#155709,.T.); +#155709 = EDGE_LOOP('',(#155710,#155711,#155719,#155726)); +#155710 = ORIENTED_EDGE('',*,*,#155614,.T.); +#155711 = ORIENTED_EDGE('',*,*,#155712,.T.); +#155712 = EDGE_CURVE('',#155615,#155713,#155715,.T.); +#155713 = VERTEX_POINT('',#155714); +#155714 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#155715 = LINE('',#155716,#155717); +#155716 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#155717 = VECTOR('',#155718,1.); +#155718 = DIRECTION('',(1.,0.,0.)); +#155719 = ORIENTED_EDGE('',*,*,#155720,.F.); +#155720 = EDGE_CURVE('',#155681,#155713,#155721,.T.); +#155721 = CIRCLE('',#155722,4.E-02); +#155722 = AXIS2_PLACEMENT_3D('',#155723,#155724,#155725); +#155723 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#155724 = DIRECTION('',(1.,0.,-0.)); +#155725 = DIRECTION('',(0.,0.,1.)); +#155726 = ORIENTED_EDGE('',*,*,#155690,.F.); +#155727 = CYLINDRICAL_SURFACE('',#155728,4.E-02); +#155728 = AXIS2_PLACEMENT_3D('',#155729,#155730,#155731); +#155729 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#155730 = DIRECTION('',(1.,0.,0.)); +#155731 = DIRECTION('',(0.,-1.,0.)); +#155732 = ADVANCED_FACE('',(#155733),#155752,.T.); +#155733 = FACE_BOUND('',#155734,.T.); +#155734 = EDGE_LOOP('',(#155735,#155736,#155745,#155751)); +#155735 = ORIENTED_EDGE('',*,*,#155697,.T.); +#155736 = ORIENTED_EDGE('',*,*,#155737,.T.); +#155737 = EDGE_CURVE('',#155683,#155738,#155740,.T.); +#155738 = VERTEX_POINT('',#155739); +#155739 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#155740 = CIRCLE('',#155741,4.E-02); +#155741 = AXIS2_PLACEMENT_3D('',#155742,#155743,#155744); +#155742 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#155743 = DIRECTION('',(-1.,0.,0.)); +#155744 = DIRECTION('',(0.,0.,1.)); +#155745 = ORIENTED_EDGE('',*,*,#155746,.F.); +#155746 = EDGE_CURVE('',#155658,#155738,#155747,.T.); +#155747 = LINE('',#155748,#155749); +#155748 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#155749 = VECTOR('',#155750,1.); +#155750 = DIRECTION('',(1.,0.,0.)); +#155751 = ORIENTED_EDGE('',*,*,#155665,.F.); +#155752 = CYLINDRICAL_SURFACE('',#155753,4.E-02); +#155753 = AXIS2_PLACEMENT_3D('',#155754,#155755,#155756); +#155754 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#155755 = DIRECTION('',(1.,0.,0.)); +#155756 = DIRECTION('',(0.,-1.,0.)); +#155757 = ADVANCED_FACE('',(#155758),#155776,.F.); +#155758 = FACE_BOUND('',#155759,.F.); +#155759 = EDGE_LOOP('',(#155760,#155761,#155762,#155770)); +#155760 = ORIENTED_EDGE('',*,*,#155623,.F.); +#155761 = ORIENTED_EDGE('',*,*,#155712,.T.); +#155762 = ORIENTED_EDGE('',*,*,#155763,.T.); +#155763 = EDGE_CURVE('',#155713,#155764,#155766,.T.); +#155764 = VERTEX_POINT('',#155765); +#155765 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#155766 = LINE('',#155767,#155768); +#155767 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#155768 = VECTOR('',#155769,1.); +#155769 = DIRECTION('',(0.,1.,0.)); +#155770 = ORIENTED_EDGE('',*,*,#155771,.F.); +#155771 = EDGE_CURVE('',#155624,#155764,#155772,.T.); +#155772 = LINE('',#155773,#155774); +#155773 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#155774 = VECTOR('',#155775,1.); +#155775 = DIRECTION('',(1.,0.,0.)); +#155776 = PLANE('',#155777); +#155777 = AXIS2_PLACEMENT_3D('',#155778,#155779,#155780); +#155778 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#155779 = DIRECTION('',(0.,0.,1.)); +#155780 = DIRECTION('',(1.,0.,-0.)); +#155781 = ADVANCED_FACE('',(#155782),#155800,.T.); +#155782 = FACE_BOUND('',#155783,.T.); +#155783 = EDGE_LOOP('',(#155784,#155785,#155786,#155794)); +#155784 = ORIENTED_EDGE('',*,*,#155657,.F.); +#155785 = ORIENTED_EDGE('',*,*,#155746,.T.); +#155786 = ORIENTED_EDGE('',*,*,#155787,.T.); +#155787 = EDGE_CURVE('',#155738,#155788,#155790,.T.); +#155788 = VERTEX_POINT('',#155789); +#155789 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#155790 = LINE('',#155791,#155792); +#155791 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#155792 = VECTOR('',#155793,1.); +#155793 = DIRECTION('',(0.,1.,0.)); +#155794 = ORIENTED_EDGE('',*,*,#155795,.F.); +#155795 = EDGE_CURVE('',#155649,#155788,#155796,.T.); +#155796 = LINE('',#155797,#155798); +#155797 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#155798 = VECTOR('',#155799,1.); +#155799 = DIRECTION('',(1.,0.,0.)); +#155800 = PLANE('',#155801); +#155801 = AXIS2_PLACEMENT_3D('',#155802,#155803,#155804); +#155802 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#155803 = DIRECTION('',(0.,0.,1.)); +#155804 = DIRECTION('',(1.,0.,-0.)); +#155805 = ADVANCED_FACE('',(#155806),#155825,.T.); +#155806 = FACE_BOUND('',#155807,.T.); +#155807 = EDGE_LOOP('',(#155808,#155816,#155823,#155824)); +#155808 = ORIENTED_EDGE('',*,*,#155809,.T.); +#155809 = EDGE_CURVE('',#155632,#155810,#155812,.T.); +#155810 = VERTEX_POINT('',#155811); +#155811 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#155812 = LINE('',#155813,#155814); +#155813 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#155814 = VECTOR('',#155815,1.); +#155815 = DIRECTION('',(1.,0.,0.)); +#155816 = ORIENTED_EDGE('',*,*,#155817,.T.); +#155817 = EDGE_CURVE('',#155810,#155764,#155818,.T.); +#155818 = CIRCLE('',#155819,4.E-02); +#155819 = AXIS2_PLACEMENT_3D('',#155820,#155821,#155822); +#155820 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#155821 = DIRECTION('',(-1.,0.,0.)); +#155822 = DIRECTION('',(0.,0.,1.)); +#155823 = ORIENTED_EDGE('',*,*,#155771,.F.); +#155824 = ORIENTED_EDGE('',*,*,#155631,.F.); +#155825 = CYLINDRICAL_SURFACE('',#155826,4.E-02); +#155826 = AXIS2_PLACEMENT_3D('',#155827,#155828,#155829); +#155827 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#155828 = DIRECTION('',(1.,0.,0.)); +#155829 = DIRECTION('',(-0.,1.,0.)); +#155830 = ADVANCED_FACE('',(#155831),#155850,.T.); +#155831 = FACE_BOUND('',#155832,.T.); +#155832 = EDGE_LOOP('',(#155833,#155834,#155835,#155844)); +#155833 = ORIENTED_EDGE('',*,*,#155648,.T.); +#155834 = ORIENTED_EDGE('',*,*,#155795,.T.); +#155835 = ORIENTED_EDGE('',*,*,#155836,.F.); +#155836 = EDGE_CURVE('',#155837,#155788,#155839,.T.); +#155837 = VERTEX_POINT('',#155838); +#155838 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#155839 = CIRCLE('',#155840,4.E-02); +#155840 = AXIS2_PLACEMENT_3D('',#155841,#155842,#155843); +#155841 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#155842 = DIRECTION('',(1.,0.,-0.)); +#155843 = DIRECTION('',(0.,0.,1.)); +#155844 = ORIENTED_EDGE('',*,*,#155845,.F.); +#155845 = EDGE_CURVE('',#155641,#155837,#155846,.T.); +#155846 = LINE('',#155847,#155848); +#155847 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#155848 = VECTOR('',#155849,1.); +#155849 = DIRECTION('',(1.,0.,0.)); +#155850 = CYLINDRICAL_SURFACE('',#155851,4.E-02); +#155851 = AXIS2_PLACEMENT_3D('',#155852,#155853,#155854); +#155852 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#155853 = DIRECTION('',(1.,0.,0.)); +#155854 = DIRECTION('',(-0.,1.,0.)); +#155855 = ADVANCED_FACE('',(#155856),#155867,.T.); +#155856 = FACE_BOUND('',#155857,.T.); +#155857 = EDGE_LOOP('',(#155858,#155864,#155865,#155866)); +#155858 = ORIENTED_EDGE('',*,*,#155859,.F.); +#155859 = EDGE_CURVE('',#155810,#155837,#155860,.T.); +#155860 = LINE('',#155861,#155862); +#155861 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#155862 = VECTOR('',#155863,1.); +#155863 = DIRECTION('',(0.,0.,1.)); +#155864 = ORIENTED_EDGE('',*,*,#155809,.F.); +#155865 = ORIENTED_EDGE('',*,*,#155640,.T.); +#155866 = ORIENTED_EDGE('',*,*,#155845,.T.); +#155867 = PLANE('',#155868); +#155868 = AXIS2_PLACEMENT_3D('',#155869,#155870,#155871); +#155869 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#155870 = DIRECTION('',(0.,1.,0.)); +#155871 = DIRECTION('',(0.,-0.,1.)); +#155872 = ADVANCED_FACE('',(#155873,#155883),#155953,.T.); +#155873 = FACE_BOUND('',#155874,.T.); +#155874 = EDGE_LOOP('',(#155875,#155876,#155877,#155878,#155879,#155880, + #155881,#155882)); +#155875 = ORIENTED_EDGE('',*,*,#155680,.F.); +#155876 = ORIENTED_EDGE('',*,*,#155720,.T.); +#155877 = ORIENTED_EDGE('',*,*,#155763,.T.); +#155878 = ORIENTED_EDGE('',*,*,#155817,.F.); +#155879 = ORIENTED_EDGE('',*,*,#155859,.T.); +#155880 = ORIENTED_EDGE('',*,*,#155836,.T.); +#155881 = ORIENTED_EDGE('',*,*,#155787,.F.); +#155882 = ORIENTED_EDGE('',*,*,#155737,.F.); +#155883 = FACE_BOUND('',#155884,.T.); +#155884 = EDGE_LOOP('',(#155885,#155896,#155904,#155913,#155921,#155930, + #155938,#155947)); +#155885 = ORIENTED_EDGE('',*,*,#155886,.F.); +#155886 = EDGE_CURVE('',#155887,#155889,#155891,.T.); +#155887 = VERTEX_POINT('',#155888); +#155888 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#155889 = VERTEX_POINT('',#155890); +#155890 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#155891 = CIRCLE('',#155892,4.E-02); +#155892 = AXIS2_PLACEMENT_3D('',#155893,#155894,#155895); +#155893 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#155894 = DIRECTION('',(1.,0.,-0.)); +#155895 = DIRECTION('',(0.,0.,1.)); +#155896 = ORIENTED_EDGE('',*,*,#155897,.T.); +#155897 = EDGE_CURVE('',#155887,#155898,#155900,.T.); +#155898 = VERTEX_POINT('',#155899); +#155899 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#155900 = LINE('',#155901,#155902); +#155901 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#155902 = VECTOR('',#155903,1.); +#155903 = DIRECTION('',(0.,0.,1.)); +#155904 = ORIENTED_EDGE('',*,*,#155905,.T.); +#155905 = EDGE_CURVE('',#155898,#155906,#155908,.T.); +#155906 = VERTEX_POINT('',#155907); +#155907 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#155908 = CIRCLE('',#155909,4.E-02); +#155909 = AXIS2_PLACEMENT_3D('',#155910,#155911,#155912); +#155910 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#155911 = DIRECTION('',(-1.,0.,0.)); +#155912 = DIRECTION('',(0.,0.,1.)); +#155913 = ORIENTED_EDGE('',*,*,#155914,.T.); +#155914 = EDGE_CURVE('',#155906,#155915,#155917,.T.); +#155915 = VERTEX_POINT('',#155916); +#155916 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#155917 = LINE('',#155918,#155919); +#155918 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#155919 = VECTOR('',#155920,1.); +#155920 = DIRECTION('',(0.,1.,0.)); +#155921 = ORIENTED_EDGE('',*,*,#155922,.F.); +#155922 = EDGE_CURVE('',#155923,#155915,#155925,.T.); +#155923 = VERTEX_POINT('',#155924); +#155924 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#155925 = CIRCLE('',#155926,4.E-02); +#155926 = AXIS2_PLACEMENT_3D('',#155927,#155928,#155929); +#155927 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#155928 = DIRECTION('',(1.,0.,-0.)); +#155929 = DIRECTION('',(0.,0.,1.)); +#155930 = ORIENTED_EDGE('',*,*,#155931,.F.); +#155931 = EDGE_CURVE('',#155932,#155923,#155934,.T.); +#155932 = VERTEX_POINT('',#155933); +#155933 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#155934 = LINE('',#155935,#155936); +#155935 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#155936 = VECTOR('',#155937,1.); +#155937 = DIRECTION('',(0.,0.,1.)); +#155938 = ORIENTED_EDGE('',*,*,#155939,.T.); +#155939 = EDGE_CURVE('',#155932,#155940,#155942,.T.); +#155940 = VERTEX_POINT('',#155941); +#155941 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#155942 = CIRCLE('',#155943,4.E-02); +#155943 = AXIS2_PLACEMENT_3D('',#155944,#155945,#155946); +#155944 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#155945 = DIRECTION('',(-1.,0.,0.)); +#155946 = DIRECTION('',(0.,0.,1.)); +#155947 = ORIENTED_EDGE('',*,*,#155948,.F.); +#155948 = EDGE_CURVE('',#155889,#155940,#155949,.T.); +#155949 = LINE('',#155950,#155951); +#155950 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#155951 = VECTOR('',#155952,1.); +#155952 = DIRECTION('',(0.,1.,0.)); +#155953 = PLANE('',#155954); +#155954 = AXIS2_PLACEMENT_3D('',#155955,#155956,#155957); +#155955 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#155956 = DIRECTION('',(1.,0.,0.)); +#155957 = DIRECTION('',(0.,0.,1.)); +#155958 = ADVANCED_FACE('',(#155959),#155985,.T.); +#155959 = FACE_BOUND('',#155960,.T.); +#155960 = EDGE_LOOP('',(#155961,#155962,#155970,#155979)); +#155961 = ORIENTED_EDGE('',*,*,#155886,.T.); +#155962 = ORIENTED_EDGE('',*,*,#155963,.T.); +#155963 = EDGE_CURVE('',#155889,#155964,#155966,.T.); +#155964 = VERTEX_POINT('',#155965); +#155965 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#155966 = LINE('',#155967,#155968); +#155967 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#155968 = VECTOR('',#155969,1.); +#155969 = DIRECTION('',(1.,0.,0.)); +#155970 = ORIENTED_EDGE('',*,*,#155971,.F.); +#155971 = EDGE_CURVE('',#155972,#155964,#155974,.T.); +#155972 = VERTEX_POINT('',#155973); +#155973 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#155974 = CIRCLE('',#155975,4.E-02); +#155975 = AXIS2_PLACEMENT_3D('',#155976,#155977,#155978); +#155976 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#155977 = DIRECTION('',(1.,0.,-0.)); +#155978 = DIRECTION('',(0.,0.,1.)); +#155979 = ORIENTED_EDGE('',*,*,#155980,.F.); +#155980 = EDGE_CURVE('',#155887,#155972,#155981,.T.); +#155981 = LINE('',#155982,#155983); +#155982 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#155983 = VECTOR('',#155984,1.); +#155984 = DIRECTION('',(1.,0.,0.)); +#155985 = CYLINDRICAL_SURFACE('',#155986,4.E-02); +#155986 = AXIS2_PLACEMENT_3D('',#155987,#155988,#155989); +#155987 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#155988 = DIRECTION('',(1.,0.,0.)); +#155989 = DIRECTION('',(0.,-1.,0.)); +#155990 = ADVANCED_FACE('',(#155991),#156009,.F.); +#155991 = FACE_BOUND('',#155992,.F.); +#155992 = EDGE_LOOP('',(#155993,#155994,#155995,#156003)); +#155993 = ORIENTED_EDGE('',*,*,#155948,.F.); +#155994 = ORIENTED_EDGE('',*,*,#155963,.T.); +#155995 = ORIENTED_EDGE('',*,*,#155996,.T.); +#155996 = EDGE_CURVE('',#155964,#155997,#155999,.T.); +#155997 = VERTEX_POINT('',#155998); +#155998 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#155999 = LINE('',#156000,#156001); +#156000 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#156001 = VECTOR('',#156002,1.); +#156002 = DIRECTION('',(0.,1.,0.)); +#156003 = ORIENTED_EDGE('',*,*,#156004,.F.); +#156004 = EDGE_CURVE('',#155940,#155997,#156005,.T.); +#156005 = LINE('',#156006,#156007); +#156006 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#156007 = VECTOR('',#156008,1.); +#156008 = DIRECTION('',(1.,0.,0.)); +#156009 = PLANE('',#156010); +#156010 = AXIS2_PLACEMENT_3D('',#156011,#156012,#156013); +#156011 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#156012 = DIRECTION('',(0.,0.,1.)); +#156013 = DIRECTION('',(1.,0.,-0.)); +#156014 = ADVANCED_FACE('',(#156015),#156034,.T.); +#156015 = FACE_BOUND('',#156016,.T.); +#156016 = EDGE_LOOP('',(#156017,#156025,#156032,#156033)); +#156017 = ORIENTED_EDGE('',*,*,#156018,.T.); +#156018 = EDGE_CURVE('',#155932,#156019,#156021,.T.); +#156019 = VERTEX_POINT('',#156020); +#156020 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#156021 = LINE('',#156022,#156023); +#156022 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#156023 = VECTOR('',#156024,1.); +#156024 = DIRECTION('',(1.,0.,0.)); +#156025 = ORIENTED_EDGE('',*,*,#156026,.T.); +#156026 = EDGE_CURVE('',#156019,#155997,#156027,.T.); +#156027 = CIRCLE('',#156028,4.E-02); +#156028 = AXIS2_PLACEMENT_3D('',#156029,#156030,#156031); +#156029 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#156030 = DIRECTION('',(-1.,0.,0.)); +#156031 = DIRECTION('',(0.,0.,1.)); +#156032 = ORIENTED_EDGE('',*,*,#156004,.F.); +#156033 = ORIENTED_EDGE('',*,*,#155939,.F.); +#156034 = CYLINDRICAL_SURFACE('',#156035,4.E-02); +#156035 = AXIS2_PLACEMENT_3D('',#156036,#156037,#156038); +#156036 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#156037 = DIRECTION('',(1.,0.,0.)); +#156038 = DIRECTION('',(-0.,1.,0.)); +#156039 = ADVANCED_FACE('',(#156040),#156058,.T.); +#156040 = FACE_BOUND('',#156041,.T.); +#156041 = EDGE_LOOP('',(#156042,#156050,#156051,#156052)); +#156042 = ORIENTED_EDGE('',*,*,#156043,.F.); +#156043 = EDGE_CURVE('',#156019,#156044,#156046,.T.); +#156044 = VERTEX_POINT('',#156045); +#156045 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#156046 = LINE('',#156047,#156048); +#156047 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#156048 = VECTOR('',#156049,1.); +#156049 = DIRECTION('',(0.,0.,1.)); +#156050 = ORIENTED_EDGE('',*,*,#156018,.F.); +#156051 = ORIENTED_EDGE('',*,*,#155931,.T.); +#156052 = ORIENTED_EDGE('',*,*,#156053,.T.); +#156053 = EDGE_CURVE('',#155923,#156044,#156054,.T.); +#156054 = LINE('',#156055,#156056); +#156055 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#156056 = VECTOR('',#156057,1.); +#156057 = DIRECTION('',(1.,0.,0.)); +#156058 = PLANE('',#156059); +#156059 = AXIS2_PLACEMENT_3D('',#156060,#156061,#156062); +#156060 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#156061 = DIRECTION('',(0.,1.,0.)); +#156062 = DIRECTION('',(0.,-0.,1.)); +#156063 = ADVANCED_FACE('',(#156064),#156083,.T.); +#156064 = FACE_BOUND('',#156065,.T.); +#156065 = EDGE_LOOP('',(#156066,#156067,#156075,#156082)); +#156066 = ORIENTED_EDGE('',*,*,#155922,.T.); +#156067 = ORIENTED_EDGE('',*,*,#156068,.T.); +#156068 = EDGE_CURVE('',#155915,#156069,#156071,.T.); +#156069 = VERTEX_POINT('',#156070); +#156070 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#156071 = LINE('',#156072,#156073); +#156072 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#156073 = VECTOR('',#156074,1.); +#156074 = DIRECTION('',(1.,0.,0.)); +#156075 = ORIENTED_EDGE('',*,*,#156076,.F.); +#156076 = EDGE_CURVE('',#156044,#156069,#156077,.T.); +#156077 = CIRCLE('',#156078,4.E-02); +#156078 = AXIS2_PLACEMENT_3D('',#156079,#156080,#156081); +#156079 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#156080 = DIRECTION('',(1.,0.,-0.)); +#156081 = DIRECTION('',(0.,0.,1.)); +#156082 = ORIENTED_EDGE('',*,*,#156053,.F.); +#156083 = CYLINDRICAL_SURFACE('',#156084,4.E-02); +#156084 = AXIS2_PLACEMENT_3D('',#156085,#156086,#156087); +#156085 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#156086 = DIRECTION('',(1.,0.,0.)); +#156087 = DIRECTION('',(-0.,1.,0.)); +#156088 = ADVANCED_FACE('',(#156089),#156107,.T.); +#156089 = FACE_BOUND('',#156090,.T.); +#156090 = EDGE_LOOP('',(#156091,#156092,#156100,#156106)); +#156091 = ORIENTED_EDGE('',*,*,#155914,.F.); +#156092 = ORIENTED_EDGE('',*,*,#156093,.T.); +#156093 = EDGE_CURVE('',#155906,#156094,#156096,.T.); +#156094 = VERTEX_POINT('',#156095); +#156095 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#156096 = LINE('',#156097,#156098); +#156097 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#156098 = VECTOR('',#156099,1.); +#156099 = DIRECTION('',(1.,0.,0.)); +#156100 = ORIENTED_EDGE('',*,*,#156101,.T.); +#156101 = EDGE_CURVE('',#156094,#156069,#156102,.T.); +#156102 = LINE('',#156103,#156104); +#156103 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#156104 = VECTOR('',#156105,1.); +#156105 = DIRECTION('',(0.,1.,0.)); +#156106 = ORIENTED_EDGE('',*,*,#156068,.F.); +#156107 = PLANE('',#156108); +#156108 = AXIS2_PLACEMENT_3D('',#156109,#156110,#156111); +#156109 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#156110 = DIRECTION('',(0.,0.,1.)); +#156111 = DIRECTION('',(1.,0.,-0.)); +#156112 = ADVANCED_FACE('',(#156113),#156132,.T.); +#156113 = FACE_BOUND('',#156114,.T.); +#156114 = EDGE_LOOP('',(#156115,#156123,#156130,#156131)); +#156115 = ORIENTED_EDGE('',*,*,#156116,.T.); +#156116 = EDGE_CURVE('',#155898,#156117,#156119,.T.); +#156117 = VERTEX_POINT('',#156118); +#156118 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#156119 = LINE('',#156120,#156121); +#156120 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#156121 = VECTOR('',#156122,1.); +#156122 = DIRECTION('',(1.,0.,0.)); +#156123 = ORIENTED_EDGE('',*,*,#156124,.T.); +#156124 = EDGE_CURVE('',#156117,#156094,#156125,.T.); +#156125 = CIRCLE('',#156126,4.E-02); +#156126 = AXIS2_PLACEMENT_3D('',#156127,#156128,#156129); +#156127 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#156128 = DIRECTION('',(-1.,0.,0.)); +#156129 = DIRECTION('',(0.,0.,1.)); +#156130 = ORIENTED_EDGE('',*,*,#156093,.F.); +#156131 = ORIENTED_EDGE('',*,*,#155905,.F.); +#156132 = CYLINDRICAL_SURFACE('',#156133,4.E-02); +#156133 = AXIS2_PLACEMENT_3D('',#156134,#156135,#156136); +#156134 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#156135 = DIRECTION('',(1.,0.,0.)); +#156136 = DIRECTION('',(0.,-1.,0.)); +#156137 = ADVANCED_FACE('',(#156138),#156149,.F.); +#156138 = FACE_BOUND('',#156139,.F.); +#156139 = EDGE_LOOP('',(#156140,#156146,#156147,#156148)); +#156140 = ORIENTED_EDGE('',*,*,#156141,.F.); +#156141 = EDGE_CURVE('',#155972,#156117,#156142,.T.); +#156142 = LINE('',#156143,#156144); +#156143 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#156144 = VECTOR('',#156145,1.); +#156145 = DIRECTION('',(0.,0.,1.)); +#156146 = ORIENTED_EDGE('',*,*,#155980,.F.); +#156147 = ORIENTED_EDGE('',*,*,#155897,.T.); +#156148 = ORIENTED_EDGE('',*,*,#156116,.T.); +#156149 = PLANE('',#156150); +#156150 = AXIS2_PLACEMENT_3D('',#156151,#156152,#156153); +#156151 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#156152 = DIRECTION('',(0.,1.,0.)); +#156153 = DIRECTION('',(0.,-0.,1.)); +#156154 = ADVANCED_FACE('',(#156155,#156225),#156235,.F.); +#156155 = FACE_BOUND('',#156156,.F.); +#156156 = EDGE_LOOP('',(#156157,#156167,#156176,#156184,#156193,#156201, + #156210,#156218)); +#156157 = ORIENTED_EDGE('',*,*,#156158,.F.); +#156158 = EDGE_CURVE('',#156159,#156161,#156163,.T.); +#156159 = VERTEX_POINT('',#156160); +#156160 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#156161 = VERTEX_POINT('',#156162); +#156162 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#156163 = LINE('',#156164,#156165); +#156164 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#156165 = VECTOR('',#156166,1.); +#156166 = DIRECTION('',(0.,0.,1.)); +#156167 = ORIENTED_EDGE('',*,*,#156168,.T.); +#156168 = EDGE_CURVE('',#156159,#156169,#156171,.T.); +#156169 = VERTEX_POINT('',#156170); +#156170 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#156171 = CIRCLE('',#156172,4.E-02); +#156172 = AXIS2_PLACEMENT_3D('',#156173,#156174,#156175); +#156173 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#156174 = DIRECTION('',(1.,0.,-0.)); +#156175 = DIRECTION('',(0.,0.,1.)); +#156176 = ORIENTED_EDGE('',*,*,#156177,.T.); +#156177 = EDGE_CURVE('',#156169,#156178,#156180,.T.); +#156178 = VERTEX_POINT('',#156179); +#156179 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#156180 = LINE('',#156181,#156182); +#156181 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#156182 = VECTOR('',#156183,1.); +#156183 = DIRECTION('',(0.,1.,0.)); +#156184 = ORIENTED_EDGE('',*,*,#156185,.F.); +#156185 = EDGE_CURVE('',#156186,#156178,#156188,.T.); +#156186 = VERTEX_POINT('',#156187); +#156187 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#156188 = CIRCLE('',#156189,4.E-02); +#156189 = AXIS2_PLACEMENT_3D('',#156190,#156191,#156192); +#156190 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#156191 = DIRECTION('',(-1.,0.,0.)); +#156192 = DIRECTION('',(0.,0.,1.)); +#156193 = ORIENTED_EDGE('',*,*,#156194,.T.); +#156194 = EDGE_CURVE('',#156186,#156195,#156197,.T.); +#156195 = VERTEX_POINT('',#156196); +#156196 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#156197 = LINE('',#156198,#156199); +#156198 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#156199 = VECTOR('',#156200,1.); +#156200 = DIRECTION('',(0.,0.,1.)); +#156201 = ORIENTED_EDGE('',*,*,#156202,.T.); +#156202 = EDGE_CURVE('',#156195,#156203,#156205,.T.); +#156203 = VERTEX_POINT('',#156204); +#156204 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#156205 = CIRCLE('',#156206,4.E-02); +#156206 = AXIS2_PLACEMENT_3D('',#156207,#156208,#156209); +#156207 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#156208 = DIRECTION('',(1.,0.,-0.)); +#156209 = DIRECTION('',(0.,0.,1.)); +#156210 = ORIENTED_EDGE('',*,*,#156211,.F.); +#156211 = EDGE_CURVE('',#156212,#156203,#156214,.T.); +#156212 = VERTEX_POINT('',#156213); +#156213 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#156214 = LINE('',#156215,#156216); +#156215 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#156216 = VECTOR('',#156217,1.); +#156217 = DIRECTION('',(0.,1.,0.)); +#156218 = ORIENTED_EDGE('',*,*,#156219,.F.); +#156219 = EDGE_CURVE('',#156161,#156212,#156220,.T.); +#156220 = CIRCLE('',#156221,4.E-02); +#156221 = AXIS2_PLACEMENT_3D('',#156222,#156223,#156224); +#156222 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#156223 = DIRECTION('',(-1.,0.,0.)); +#156224 = DIRECTION('',(0.,0.,1.)); +#156225 = FACE_BOUND('',#156226,.F.); +#156226 = EDGE_LOOP('',(#156227,#156228,#156229,#156230,#156231,#156232, + #156233,#156234)); +#156227 = ORIENTED_EDGE('',*,*,#155971,.F.); +#156228 = ORIENTED_EDGE('',*,*,#156141,.T.); +#156229 = ORIENTED_EDGE('',*,*,#156124,.T.); +#156230 = ORIENTED_EDGE('',*,*,#156101,.T.); +#156231 = ORIENTED_EDGE('',*,*,#156076,.F.); +#156232 = ORIENTED_EDGE('',*,*,#156043,.F.); +#156233 = ORIENTED_EDGE('',*,*,#156026,.T.); +#156234 = ORIENTED_EDGE('',*,*,#155996,.F.); +#156235 = PLANE('',#156236); +#156236 = AXIS2_PLACEMENT_3D('',#156237,#156238,#156239); +#156237 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#156238 = DIRECTION('',(1.,0.,0.)); +#156239 = DIRECTION('',(0.,0.,1.)); +#156240 = ADVANCED_FACE('',(#156241),#156266,.F.); +#156241 = FACE_BOUND('',#156242,.F.); +#156242 = EDGE_LOOP('',(#156243,#156253,#156259,#156260)); +#156243 = ORIENTED_EDGE('',*,*,#156244,.F.); +#156244 = EDGE_CURVE('',#156245,#156247,#156249,.T.); +#156245 = VERTEX_POINT('',#156246); +#156246 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#156247 = VERTEX_POINT('',#156248); +#156248 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#156249 = LINE('',#156250,#156251); +#156250 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#156251 = VECTOR('',#156252,1.); +#156252 = DIRECTION('',(0.,0.,1.)); +#156253 = ORIENTED_EDGE('',*,*,#156254,.F.); +#156254 = EDGE_CURVE('',#156159,#156245,#156255,.T.); +#156255 = LINE('',#156256,#156257); +#156256 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#156257 = VECTOR('',#156258,1.); +#156258 = DIRECTION('',(1.,0.,0.)); +#156259 = ORIENTED_EDGE('',*,*,#156158,.T.); +#156260 = ORIENTED_EDGE('',*,*,#156261,.T.); +#156261 = EDGE_CURVE('',#156161,#156247,#156262,.T.); +#156262 = LINE('',#156263,#156264); +#156263 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#156264 = VECTOR('',#156265,1.); +#156265 = DIRECTION('',(1.,0.,0.)); +#156266 = PLANE('',#156267); +#156267 = AXIS2_PLACEMENT_3D('',#156268,#156269,#156270); +#156268 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#156269 = DIRECTION('',(0.,1.,0.)); +#156270 = DIRECTION('',(0.,-0.,1.)); +#156271 = ADVANCED_FACE('',(#156272),#156291,.T.); +#156272 = FACE_BOUND('',#156273,.T.); +#156273 = EDGE_LOOP('',(#156274,#156275,#156283,#156290)); +#156274 = ORIENTED_EDGE('',*,*,#156168,.T.); +#156275 = ORIENTED_EDGE('',*,*,#156276,.T.); +#156276 = EDGE_CURVE('',#156169,#156277,#156279,.T.); +#156277 = VERTEX_POINT('',#156278); +#156278 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#156279 = LINE('',#156280,#156281); +#156280 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#156281 = VECTOR('',#156282,1.); +#156282 = DIRECTION('',(1.,0.,0.)); +#156283 = ORIENTED_EDGE('',*,*,#156284,.F.); +#156284 = EDGE_CURVE('',#156245,#156277,#156285,.T.); +#156285 = CIRCLE('',#156286,4.E-02); +#156286 = AXIS2_PLACEMENT_3D('',#156287,#156288,#156289); +#156287 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#156288 = DIRECTION('',(1.,0.,-0.)); +#156289 = DIRECTION('',(0.,0.,1.)); +#156290 = ORIENTED_EDGE('',*,*,#156254,.F.); +#156291 = CYLINDRICAL_SURFACE('',#156292,4.E-02); +#156292 = AXIS2_PLACEMENT_3D('',#156293,#156294,#156295); +#156293 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#156294 = DIRECTION('',(1.,0.,0.)); +#156295 = DIRECTION('',(0.,-1.,0.)); +#156296 = ADVANCED_FACE('',(#156297),#156316,.T.); +#156297 = FACE_BOUND('',#156298,.T.); +#156298 = EDGE_LOOP('',(#156299,#156300,#156309,#156315)); +#156299 = ORIENTED_EDGE('',*,*,#156261,.T.); +#156300 = ORIENTED_EDGE('',*,*,#156301,.T.); +#156301 = EDGE_CURVE('',#156247,#156302,#156304,.T.); +#156302 = VERTEX_POINT('',#156303); +#156303 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#156304 = CIRCLE('',#156305,4.E-02); +#156305 = AXIS2_PLACEMENT_3D('',#156306,#156307,#156308); +#156306 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#156307 = DIRECTION('',(-1.,0.,0.)); +#156308 = DIRECTION('',(0.,0.,1.)); +#156309 = ORIENTED_EDGE('',*,*,#156310,.F.); +#156310 = EDGE_CURVE('',#156212,#156302,#156311,.T.); +#156311 = LINE('',#156312,#156313); +#156312 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#156313 = VECTOR('',#156314,1.); +#156314 = DIRECTION('',(1.,0.,0.)); +#156315 = ORIENTED_EDGE('',*,*,#156219,.F.); +#156316 = CYLINDRICAL_SURFACE('',#156317,4.E-02); +#156317 = AXIS2_PLACEMENT_3D('',#156318,#156319,#156320); +#156318 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#156319 = DIRECTION('',(1.,0.,0.)); +#156320 = DIRECTION('',(0.,-1.,0.)); +#156321 = ADVANCED_FACE('',(#156322),#156340,.F.); +#156322 = FACE_BOUND('',#156323,.F.); +#156323 = EDGE_LOOP('',(#156324,#156325,#156326,#156334)); +#156324 = ORIENTED_EDGE('',*,*,#156177,.F.); +#156325 = ORIENTED_EDGE('',*,*,#156276,.T.); +#156326 = ORIENTED_EDGE('',*,*,#156327,.T.); +#156327 = EDGE_CURVE('',#156277,#156328,#156330,.T.); +#156328 = VERTEX_POINT('',#156329); +#156329 = CARTESIAN_POINT('',(1.,0.585,0.)); +#156330 = LINE('',#156331,#156332); +#156331 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#156332 = VECTOR('',#156333,1.); +#156333 = DIRECTION('',(0.,1.,0.)); +#156334 = ORIENTED_EDGE('',*,*,#156335,.F.); +#156335 = EDGE_CURVE('',#156178,#156328,#156336,.T.); +#156336 = LINE('',#156337,#156338); +#156337 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#156338 = VECTOR('',#156339,1.); +#156339 = DIRECTION('',(1.,0.,0.)); +#156340 = PLANE('',#156341); +#156341 = AXIS2_PLACEMENT_3D('',#156342,#156343,#156344); +#156342 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#156343 = DIRECTION('',(0.,0.,1.)); +#156344 = DIRECTION('',(1.,0.,-0.)); +#156345 = ADVANCED_FACE('',(#156346),#156364,.T.); +#156346 = FACE_BOUND('',#156347,.T.); +#156347 = EDGE_LOOP('',(#156348,#156349,#156350,#156358)); +#156348 = ORIENTED_EDGE('',*,*,#156211,.F.); +#156349 = ORIENTED_EDGE('',*,*,#156310,.T.); +#156350 = ORIENTED_EDGE('',*,*,#156351,.T.); +#156351 = EDGE_CURVE('',#156302,#156352,#156354,.T.); +#156352 = VERTEX_POINT('',#156353); +#156353 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#156354 = LINE('',#156355,#156356); +#156355 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#156356 = VECTOR('',#156357,1.); +#156357 = DIRECTION('',(0.,1.,0.)); +#156358 = ORIENTED_EDGE('',*,*,#156359,.F.); +#156359 = EDGE_CURVE('',#156203,#156352,#156360,.T.); +#156360 = LINE('',#156361,#156362); +#156361 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#156362 = VECTOR('',#156363,1.); +#156363 = DIRECTION('',(1.,0.,0.)); +#156364 = PLANE('',#156365); +#156365 = AXIS2_PLACEMENT_3D('',#156366,#156367,#156368); +#156366 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#156367 = DIRECTION('',(0.,0.,1.)); +#156368 = DIRECTION('',(1.,0.,-0.)); +#156369 = ADVANCED_FACE('',(#156370),#156389,.T.); +#156370 = FACE_BOUND('',#156371,.T.); +#156371 = EDGE_LOOP('',(#156372,#156380,#156387,#156388)); +#156372 = ORIENTED_EDGE('',*,*,#156373,.T.); +#156373 = EDGE_CURVE('',#156186,#156374,#156376,.T.); +#156374 = VERTEX_POINT('',#156375); +#156375 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#156376 = LINE('',#156377,#156378); +#156377 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#156378 = VECTOR('',#156379,1.); +#156379 = DIRECTION('',(1.,0.,0.)); +#156380 = ORIENTED_EDGE('',*,*,#156381,.T.); +#156381 = EDGE_CURVE('',#156374,#156328,#156382,.T.); +#156382 = CIRCLE('',#156383,4.E-02); +#156383 = AXIS2_PLACEMENT_3D('',#156384,#156385,#156386); +#156384 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#156385 = DIRECTION('',(-1.,0.,0.)); +#156386 = DIRECTION('',(0.,0.,1.)); +#156387 = ORIENTED_EDGE('',*,*,#156335,.F.); +#156388 = ORIENTED_EDGE('',*,*,#156185,.F.); +#156389 = CYLINDRICAL_SURFACE('',#156390,4.E-02); +#156390 = AXIS2_PLACEMENT_3D('',#156391,#156392,#156393); +#156391 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#156392 = DIRECTION('',(1.,0.,0.)); +#156393 = DIRECTION('',(-0.,1.,0.)); +#156394 = ADVANCED_FACE('',(#156395),#156414,.T.); +#156395 = FACE_BOUND('',#156396,.T.); +#156396 = EDGE_LOOP('',(#156397,#156398,#156399,#156408)); +#156397 = ORIENTED_EDGE('',*,*,#156202,.T.); +#156398 = ORIENTED_EDGE('',*,*,#156359,.T.); +#156399 = ORIENTED_EDGE('',*,*,#156400,.F.); +#156400 = EDGE_CURVE('',#156401,#156352,#156403,.T.); +#156401 = VERTEX_POINT('',#156402); +#156402 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#156403 = CIRCLE('',#156404,4.E-02); +#156404 = AXIS2_PLACEMENT_3D('',#156405,#156406,#156407); +#156405 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#156406 = DIRECTION('',(1.,0.,-0.)); +#156407 = DIRECTION('',(0.,0.,1.)); +#156408 = ORIENTED_EDGE('',*,*,#156409,.F.); +#156409 = EDGE_CURVE('',#156195,#156401,#156410,.T.); +#156410 = LINE('',#156411,#156412); +#156411 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#156412 = VECTOR('',#156413,1.); +#156413 = DIRECTION('',(1.,0.,0.)); +#156414 = CYLINDRICAL_SURFACE('',#156415,4.E-02); +#156415 = AXIS2_PLACEMENT_3D('',#156416,#156417,#156418); +#156416 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#156417 = DIRECTION('',(1.,0.,0.)); +#156418 = DIRECTION('',(-0.,1.,0.)); +#156419 = ADVANCED_FACE('',(#156420),#156431,.T.); +#156420 = FACE_BOUND('',#156421,.T.); +#156421 = EDGE_LOOP('',(#156422,#156428,#156429,#156430)); +#156422 = ORIENTED_EDGE('',*,*,#156423,.F.); +#156423 = EDGE_CURVE('',#156374,#156401,#156424,.T.); +#156424 = LINE('',#156425,#156426); +#156425 = CARTESIAN_POINT('',(1.,0.625,0.)); +#156426 = VECTOR('',#156427,1.); +#156427 = DIRECTION('',(0.,0.,1.)); +#156428 = ORIENTED_EDGE('',*,*,#156373,.F.); +#156429 = ORIENTED_EDGE('',*,*,#156194,.T.); +#156430 = ORIENTED_EDGE('',*,*,#156409,.T.); +#156431 = PLANE('',#156432); +#156432 = AXIS2_PLACEMENT_3D('',#156433,#156434,#156435); +#156433 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#156434 = DIRECTION('',(0.,1.,0.)); +#156435 = DIRECTION('',(0.,-0.,1.)); +#156436 = ADVANCED_FACE('',(#156437),#156447,.T.); +#156437 = FACE_BOUND('',#156438,.T.); +#156438 = EDGE_LOOP('',(#156439,#156440,#156441,#156442,#156443,#156444, + #156445,#156446)); +#156439 = ORIENTED_EDGE('',*,*,#156244,.F.); +#156440 = ORIENTED_EDGE('',*,*,#156284,.T.); +#156441 = ORIENTED_EDGE('',*,*,#156327,.T.); +#156442 = ORIENTED_EDGE('',*,*,#156381,.F.); +#156443 = ORIENTED_EDGE('',*,*,#156423,.T.); +#156444 = ORIENTED_EDGE('',*,*,#156400,.T.); +#156445 = ORIENTED_EDGE('',*,*,#156351,.F.); +#156446 = ORIENTED_EDGE('',*,*,#156301,.F.); +#156447 = PLANE('',#156448); +#156448 = AXIS2_PLACEMENT_3D('',#156449,#156450,#156451); +#156449 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#156450 = DIRECTION('',(1.,0.,0.)); +#156451 = DIRECTION('',(0.,0.,1.)); +#156452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#156456)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#156453,#156454,#156455)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#156453 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#156454 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#156455 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#156456 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#156453, + 'distance_accuracy_value','confusion accuracy'); +#156457 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156458,#156460); +#156458 = ( REPRESENTATION_RELATIONSHIP('','',#155597,#155574) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156459) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156459 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155575); +#156460 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156461); +#156461 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('56','=>[0:1:1:32]','',#155569, + #155592,$); +#156462 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#155594)); +#156463 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156464,#156466); +#156464 = ( REPRESENTATION_RELATIONSHIP('','',#12155,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156465) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156465 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#156466 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156467); +#156467 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('58','SW_MACRO1','',#5,#12150,$ + ); +#156468 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156469,#156471); +#156469 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156470) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156470 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#156471 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156472); +#156472 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('59','R_VSYS2','',#5,#31605,$); +#156473 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156474,#156476); +#156474 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156475) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156475 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#156476 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156477); +#156477 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('60','C_STICK1','',#5,#32437,$ + ); +#156478 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156479,#156481); +#156479 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156480) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156480 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#156481 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156482); +#156482 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('61','R_XBEE_ATTN_PU1','',#5, + #31605,$); +#156483 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156484,#156486); +#156484 = ( REPRESENTATION_RELATIONSHIP('','',#13563,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156485) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156485 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#156486 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156487); +#156487 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('62','SW_PWR1','',#5,#13558,$); +#156488 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156489,#156491); +#156489 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156490) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156490 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#156491 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156492); +#156492 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('63','C_3V3_3','',#5,#32437,$); +#156493 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156494,#156496); +#156494 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156495) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156495 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#156496 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156497); +#156497 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('64','R_BOOT_PU1','',#5,#31605, + $); +#156498 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156499,#156501); +#156499 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156500) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156500 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#156501 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156502); +#156502 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('65','R_BTN_PU1','',#5,#31605,$ + ); +#156503 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156504,#156506); +#156504 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156505) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156505 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#156506 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156507); +#156507 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('66','C_SYS_1','',#5,#155569,$ + ); +#156508 = SHAPE_DEFINITION_REPRESENTATION(#156509,#156515); +#156509 = PRODUCT_DEFINITION_SHAPE('','',#156510); +#156510 = PRODUCT_DEFINITION('design','',#156511,#156514); +#156511 = PRODUCT_DEFINITION_FORMATION('','',#156512); +#156512 = PRODUCT('SOT-23','SOT-23','',(#156513)); +#156513 = PRODUCT_CONTEXT('',#2,'mechanical'); +#156514 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#156515 = SHAPE_REPRESENTATION('',(#11,#156516),#156520); +#156516 = AXIS2_PLACEMENT_3D('',#156517,#156518,#156519); +#156517 = CARTESIAN_POINT('',(0.,0.,0.)); +#156518 = DIRECTION('',(0.,0.,1.)); +#156519 = DIRECTION('',(1.,0.,-0.)); +#156520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#156524)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#156521,#156522,#156523)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#156521 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#156522 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#156523 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#156524 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#156521, + 'distance_accuracy_value','confusion accuracy'); +#156525 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#156526,#156528); +#156526 = ( REPRESENTATION_RELATIONSHIP('','',#156515,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#156527) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#156527 = ITEM_DEFINED_TRANSFORMATION('','',#11,#211); +#156528 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #156529); +#156529 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('68','Q_PWR1','',#5,#156510,$); +#156530 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#156512)); +#156531 = SHAPE_DEFINITION_REPRESENTATION(#156532,#156538); +#156532 = PRODUCT_DEFINITION_SHAPE('','',#156533); +#156533 = PRODUCT_DEFINITION('design','',#156534,#156537); +#156534 = PRODUCT_DEFINITION_FORMATION('','',#156535); +#156535 = PRODUCT('SOT-23','SOT-23','',(#156536)); +#156536 = PRODUCT_CONTEXT('',#2,'mechanical'); +#156537 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#156538 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#156539),#158521); +#156539 = MANIFOLD_SOLID_BREP('',#156540); +#156540 = CLOSED_SHELL('',(#156541,#156579,#156642,#156665,#156694, + #156717,#156772,#156811,#156834,#156857,#156874,#156897,#156985, + #157001,#157031,#157064,#157095,#157128,#157145,#157162,#157195, + #157225,#157248,#157271,#157288,#157317,#157371,#157394,#157417, + #157440,#157479,#157501,#157545,#157620,#157644,#157712,#157729, + #157804,#157828,#157896,#157971,#157995,#158063,#158080,#158097, + #158143,#158159,#158175,#158192,#158204,#158221,#158238,#158255, + #158272,#158289,#158306,#158318,#158335,#158352,#158369,#158386, + #158403,#158415,#158432,#158449,#158466,#158483,#158500,#158512)); +#156541 = ADVANCED_FACE('',(#156542),#156574,.F.); +#156542 = FACE_BOUND('',#156543,.F.); +#156543 = EDGE_LOOP('',(#156544,#156554,#156561,#156569)); +#156544 = ORIENTED_EDGE('',*,*,#156545,.T.); +#156545 = EDGE_CURVE('',#156546,#156548,#156550,.T.); +#156546 = VERTEX_POINT('',#156547); +#156547 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156548 = VERTEX_POINT('',#156549); +#156549 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#156550 = LINE('',#156551,#156552); +#156551 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156552 = VECTOR('',#156553,1.); +#156553 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#156554 = ORIENTED_EDGE('',*,*,#156555,.T.); +#156555 = EDGE_CURVE('',#156548,#156556,#156558,.T.); +#156556 = VERTEX_POINT('',#156557); +#156557 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156558 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156559,#156560), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156559 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#156560 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156561 = ORIENTED_EDGE('',*,*,#156562,.F.); +#156562 = EDGE_CURVE('',#156563,#156556,#156565,.T.); +#156563 = VERTEX_POINT('',#156564); +#156564 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156565 = LINE('',#156566,#156567); +#156566 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156567 = VECTOR('',#156568,1.); +#156568 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#156569 = ORIENTED_EDGE('',*,*,#156570,.F.); +#156570 = EDGE_CURVE('',#156546,#156563,#156571,.T.); +#156571 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156572,#156573), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156572 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156573 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156574 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156575,#156576) + ,(#156577,#156578 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#156575 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156576 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156577 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#156578 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156579 = ADVANCED_FACE('',(#156580),#156637,.T.); +#156580 = FACE_BOUND('',#156581,.T.); +#156581 = EDGE_LOOP('',(#156582,#156583,#156591,#156599,#156607,#156615, + #156623,#156631)); +#156582 = ORIENTED_EDGE('',*,*,#156545,.T.); +#156583 = ORIENTED_EDGE('',*,*,#156584,.T.); +#156584 = EDGE_CURVE('',#156548,#156585,#156587,.T.); +#156585 = VERTEX_POINT('',#156586); +#156586 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#156587 = LINE('',#156588,#156589); +#156588 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#156589 = VECTOR('',#156590,1.); +#156590 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#156591 = ORIENTED_EDGE('',*,*,#156592,.T.); +#156592 = EDGE_CURVE('',#156585,#156593,#156595,.T.); +#156593 = VERTEX_POINT('',#156594); +#156594 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#156595 = LINE('',#156596,#156597); +#156596 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#156597 = VECTOR('',#156598,1.); +#156598 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156599 = ORIENTED_EDGE('',*,*,#156600,.T.); +#156600 = EDGE_CURVE('',#156593,#156601,#156603,.T.); +#156601 = VERTEX_POINT('',#156602); +#156602 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#156603 = LINE('',#156604,#156605); +#156604 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#156605 = VECTOR('',#156606,1.); +#156606 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#156607 = ORIENTED_EDGE('',*,*,#156608,.T.); +#156608 = EDGE_CURVE('',#156601,#156609,#156611,.T.); +#156609 = VERTEX_POINT('',#156610); +#156610 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#156611 = LINE('',#156612,#156613); +#156612 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#156613 = VECTOR('',#156614,1.); +#156614 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#156615 = ORIENTED_EDGE('',*,*,#156616,.T.); +#156616 = EDGE_CURVE('',#156609,#156617,#156619,.T.); +#156617 = VERTEX_POINT('',#156618); +#156618 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#156619 = LINE('',#156620,#156621); +#156620 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#156621 = VECTOR('',#156622,1.); +#156622 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#156623 = ORIENTED_EDGE('',*,*,#156624,.T.); +#156624 = EDGE_CURVE('',#156617,#156625,#156627,.T.); +#156625 = VERTEX_POINT('',#156626); +#156626 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#156627 = LINE('',#156628,#156629); +#156628 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#156629 = VECTOR('',#156630,1.); +#156630 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156631 = ORIENTED_EDGE('',*,*,#156632,.T.); +#156632 = EDGE_CURVE('',#156625,#156546,#156633,.T.); +#156633 = LINE('',#156634,#156635); +#156634 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#156635 = VECTOR('',#156636,1.); +#156636 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#156637 = PLANE('',#156638); +#156638 = AXIS2_PLACEMENT_3D('',#156639,#156640,#156641); +#156639 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156640 = DIRECTION('',(0.,0.,-1.)); +#156641 = DIRECTION('',(0.370454302632,-0.928850692879,0.)); +#156642 = ADVANCED_FACE('',(#156643),#156660,.F.); +#156643 = FACE_BOUND('',#156644,.F.); +#156644 = EDGE_LOOP('',(#156645,#156646,#156653,#156659)); +#156645 = ORIENTED_EDGE('',*,*,#156584,.T.); +#156646 = ORIENTED_EDGE('',*,*,#156647,.T.); +#156647 = EDGE_CURVE('',#156585,#156648,#156650,.T.); +#156648 = VERTEX_POINT('',#156649); +#156649 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156650 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156651,#156652), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156651 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#156652 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156653 = ORIENTED_EDGE('',*,*,#156654,.F.); +#156654 = EDGE_CURVE('',#156556,#156648,#156655,.T.); +#156655 = LINE('',#156656,#156657); +#156656 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156657 = VECTOR('',#156658,1.); +#156658 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#156659 = ORIENTED_EDGE('',*,*,#156555,.F.); +#156660 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156661,#156662) + ,(#156663,#156664 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#156661 = CARTESIAN_POINT('',(0.571621551758,1.433243103516,0.1)); +#156662 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156663 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#156664 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156665 = ADVANCED_FACE('',(#156666),#156689,.F.); +#156666 = FACE_BOUND('',#156667,.F.); +#156667 = EDGE_LOOP('',(#156668,#156669,#156676,#156684)); +#156668 = ORIENTED_EDGE('',*,*,#156562,.T.); +#156669 = ORIENTED_EDGE('',*,*,#156670,.T.); +#156670 = EDGE_CURVE('',#156556,#156671,#156673,.T.); +#156671 = VERTEX_POINT('',#156672); +#156672 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#156673 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156674,#156675), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156674 = CARTESIAN_POINT('',(0.605,1.5,0.575)); +#156675 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#156676 = ORIENTED_EDGE('',*,*,#156677,.F.); +#156677 = EDGE_CURVE('',#156678,#156671,#156680,.T.); +#156678 = VERTEX_POINT('',#156679); +#156679 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#156680 = LINE('',#156681,#156682); +#156681 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#156682 = VECTOR('',#156683,1.); +#156683 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#156684 = ORIENTED_EDGE('',*,*,#156685,.F.); +#156685 = EDGE_CURVE('',#156563,#156678,#156686,.T.); +#156686 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156687,#156688), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156687 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156688 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#156689 = PLANE('',#156690); +#156690 = AXIS2_PLACEMENT_3D('',#156691,#156692,#156693); +#156691 = CARTESIAN_POINT('',(-0.605,1.5,0.725)); +#156692 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156693 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#156694 = ADVANCED_FACE('',(#156695),#156712,.F.); +#156695 = FACE_BOUND('',#156696,.F.); +#156696 = EDGE_LOOP('',(#156697,#156698,#156699,#156707)); +#156697 = ORIENTED_EDGE('',*,*,#156632,.T.); +#156698 = ORIENTED_EDGE('',*,*,#156570,.T.); +#156699 = ORIENTED_EDGE('',*,*,#156700,.F.); +#156700 = EDGE_CURVE('',#156701,#156563,#156703,.T.); +#156701 = VERTEX_POINT('',#156702); +#156702 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156703 = LINE('',#156704,#156705); +#156704 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156705 = VECTOR('',#156706,1.); +#156706 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#156707 = ORIENTED_EDGE('',*,*,#156708,.F.); +#156708 = EDGE_CURVE('',#156625,#156701,#156709,.T.); +#156709 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156710,#156711), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156710 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#156711 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156712 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156713,#156714) + ,(#156715,#156716 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#156713 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#156714 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156715 = CARTESIAN_POINT('',(-0.571621551758,1.433243103516,0.1)); +#156716 = CARTESIAN_POINT('',(-0.605,1.5,0.575)); +#156717 = ADVANCED_FACE('',(#156718),#156767,.F.); +#156718 = FACE_BOUND('',#156719,.F.); +#156719 = EDGE_LOOP('',(#156720,#156721,#156722,#156730,#156738,#156746, + #156754,#156762)); +#156720 = ORIENTED_EDGE('',*,*,#156624,.T.); +#156721 = ORIENTED_EDGE('',*,*,#156708,.T.); +#156722 = ORIENTED_EDGE('',*,*,#156723,.F.); +#156723 = EDGE_CURVE('',#156724,#156701,#156726,.T.); +#156724 = VERTEX_POINT('',#156725); +#156725 = CARTESIAN_POINT('',(-0.7,1.15,0.575)); +#156726 = LINE('',#156727,#156728); +#156727 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156728 = VECTOR('',#156729,1.); +#156729 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156730 = ORIENTED_EDGE('',*,*,#156731,.F.); +#156731 = EDGE_CURVE('',#156732,#156724,#156734,.T.); +#156732 = VERTEX_POINT('',#156733); +#156733 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#156734 = LINE('',#156735,#156736); +#156735 = CARTESIAN_POINT('',(-0.7,0.75,0.575)); +#156736 = VECTOR('',#156737,1.); +#156737 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#156738 = ORIENTED_EDGE('',*,*,#156739,.F.); +#156739 = EDGE_CURVE('',#156740,#156732,#156742,.T.); +#156740 = VERTEX_POINT('',#156741); +#156741 = CARTESIAN_POINT('',(-0.7,-0.75,0.575)); +#156742 = LINE('',#156743,#156744); +#156743 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156744 = VECTOR('',#156745,1.); +#156745 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156746 = ORIENTED_EDGE('',*,*,#156747,.F.); +#156747 = EDGE_CURVE('',#156748,#156740,#156750,.T.); +#156748 = VERTEX_POINT('',#156749); +#156749 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#156750 = LINE('',#156751,#156752); +#156751 = CARTESIAN_POINT('',(-0.7,-1.15,0.575)); +#156752 = VECTOR('',#156753,1.); +#156753 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#156754 = ORIENTED_EDGE('',*,*,#156755,.F.); +#156755 = EDGE_CURVE('',#156756,#156748,#156758,.T.); +#156756 = VERTEX_POINT('',#156757); +#156757 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156758 = LINE('',#156759,#156760); +#156759 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156760 = VECTOR('',#156761,1.); +#156761 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156762 = ORIENTED_EDGE('',*,*,#156763,.F.); +#156763 = EDGE_CURVE('',#156617,#156756,#156764,.T.); +#156764 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156765,#156766), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156765 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#156766 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156767 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156768,#156769) + ,(#156770,#156771 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#156768 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#156769 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156770 = CARTESIAN_POINT('',(-0.633243103516,1.371621551758,0.1)); +#156771 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156772 = ADVANCED_FACE('',(#156773),#156806,.F.); +#156773 = FACE_BOUND('',#156774,.F.); +#156774 = EDGE_LOOP('',(#156775,#156776,#156783,#156791,#156799,#156805) + ); +#156775 = ORIENTED_EDGE('',*,*,#156592,.T.); +#156776 = ORIENTED_EDGE('',*,*,#156777,.T.); +#156777 = EDGE_CURVE('',#156593,#156778,#156780,.T.); +#156778 = VERTEX_POINT('',#156779); +#156779 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#156780 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156781,#156782), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156781 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#156782 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#156783 = ORIENTED_EDGE('',*,*,#156784,.F.); +#156784 = EDGE_CURVE('',#156785,#156778,#156787,.T.); +#156785 = VERTEX_POINT('',#156786); +#156786 = CARTESIAN_POINT('',(0.7,-0.2,0.575)); +#156787 = LINE('',#156788,#156789); +#156788 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156789 = VECTOR('',#156790,1.); +#156790 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156791 = ORIENTED_EDGE('',*,*,#156792,.F.); +#156792 = EDGE_CURVE('',#156793,#156785,#156795,.T.); +#156793 = VERTEX_POINT('',#156794); +#156794 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#156795 = LINE('',#156796,#156797); +#156796 = CARTESIAN_POINT('',(0.7,0.2,0.575)); +#156797 = VECTOR('',#156798,1.); +#156798 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156799 = ORIENTED_EDGE('',*,*,#156800,.F.); +#156800 = EDGE_CURVE('',#156648,#156793,#156801,.T.); +#156801 = LINE('',#156802,#156803); +#156802 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156803 = VECTOR('',#156804,1.); +#156804 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156805 = ORIENTED_EDGE('',*,*,#156647,.F.); +#156806 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156807,#156808) + ,(#156809,#156810 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.81),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#156807 = CARTESIAN_POINT('',(0.633243103516,1.371621551758,0.1)); +#156808 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156809 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#156810 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#156811 = ADVANCED_FACE('',(#156812),#156829,.F.); +#156812 = FACE_BOUND('',#156813,.F.); +#156813 = EDGE_LOOP('',(#156814,#156815,#156816,#156824)); +#156814 = ORIENTED_EDGE('',*,*,#156616,.T.); +#156815 = ORIENTED_EDGE('',*,*,#156763,.T.); +#156816 = ORIENTED_EDGE('',*,*,#156817,.F.); +#156817 = EDGE_CURVE('',#156818,#156756,#156820,.T.); +#156818 = VERTEX_POINT('',#156819); +#156819 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#156820 = LINE('',#156821,#156822); +#156821 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#156822 = VECTOR('',#156823,1.); +#156823 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#156824 = ORIENTED_EDGE('',*,*,#156825,.F.); +#156825 = EDGE_CURVE('',#156609,#156818,#156826,.T.); +#156826 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156827,#156828), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156827 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#156828 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#156829 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156830,#156831) + ,(#156832,#156833 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#156830 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#156831 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#156832 = CARTESIAN_POINT('',(-0.633243103516,-1.371621551758,0.1)); +#156833 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#156834 = ADVANCED_FACE('',(#156835),#156852,.F.); +#156835 = FACE_BOUND('',#156836,.F.); +#156836 = EDGE_LOOP('',(#156837,#156838,#156845,#156851)); +#156837 = ORIENTED_EDGE('',*,*,#156600,.T.); +#156838 = ORIENTED_EDGE('',*,*,#156839,.T.); +#156839 = EDGE_CURVE('',#156601,#156840,#156842,.T.); +#156840 = VERTEX_POINT('',#156841); +#156841 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#156842 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156843,#156844), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156843 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#156844 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#156845 = ORIENTED_EDGE('',*,*,#156846,.F.); +#156846 = EDGE_CURVE('',#156778,#156840,#156847,.T.); +#156847 = LINE('',#156848,#156849); +#156848 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#156849 = VECTOR('',#156850,1.); +#156850 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#156851 = ORIENTED_EDGE('',*,*,#156777,.F.); +#156852 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156853,#156854) + ,(#156855,#156856 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#156853 = CARTESIAN_POINT('',(0.633243103516,-1.371621551758,0.1)); +#156854 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#156855 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#156856 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#156857 = ADVANCED_FACE('',(#156858),#156869,.F.); +#156858 = FACE_BOUND('',#156859,.F.); +#156859 = EDGE_LOOP('',(#156860,#156861,#156862,#156868)); +#156860 = ORIENTED_EDGE('',*,*,#156608,.T.); +#156861 = ORIENTED_EDGE('',*,*,#156825,.T.); +#156862 = ORIENTED_EDGE('',*,*,#156863,.F.); +#156863 = EDGE_CURVE('',#156840,#156818,#156864,.T.); +#156864 = LINE('',#156865,#156866); +#156865 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#156866 = VECTOR('',#156867,1.); +#156867 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#156868 = ORIENTED_EDGE('',*,*,#156839,.F.); +#156869 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#156870,#156871) + ,(#156872,#156873 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.21),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#156870 = CARTESIAN_POINT('',(0.571621551758,-1.433243103516,0.1)); +#156871 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#156872 = CARTESIAN_POINT('',(-0.571621551758,-1.433243103516,0.1)); +#156873 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#156874 = ADVANCED_FACE('',(#156875),#156892,.F.); +#156875 = FACE_BOUND('',#156876,.F.); +#156876 = EDGE_LOOP('',(#156877,#156878,#156885,#156891)); +#156877 = ORIENTED_EDGE('',*,*,#156654,.T.); +#156878 = ORIENTED_EDGE('',*,*,#156879,.T.); +#156879 = EDGE_CURVE('',#156648,#156880,#156882,.T.); +#156880 = VERTEX_POINT('',#156881); +#156881 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#156882 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156883,#156884), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156883 = CARTESIAN_POINT('',(0.7,1.405,0.575)); +#156884 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#156885 = ORIENTED_EDGE('',*,*,#156886,.F.); +#156886 = EDGE_CURVE('',#156671,#156880,#156887,.T.); +#156887 = LINE('',#156888,#156889); +#156888 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#156889 = VECTOR('',#156890,1.); +#156890 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#156891 = ORIENTED_EDGE('',*,*,#156670,.F.); +#156892 = PLANE('',#156893); +#156893 = AXIS2_PLACEMENT_3D('',#156894,#156895,#156896); +#156894 = CARTESIAN_POINT('',(0.605,1.5,0.725)); +#156895 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#156896 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#156897 = ADVANCED_FACE('',(#156898),#156980,.F.); +#156898 = FACE_BOUND('',#156899,.F.); +#156899 = EDGE_LOOP('',(#156900,#156908,#156909,#156910,#156918,#156926, + #156934,#156942,#156950,#156958,#156966,#156974)); +#156900 = ORIENTED_EDGE('',*,*,#156901,.T.); +#156901 = EDGE_CURVE('',#156902,#156678,#156904,.T.); +#156902 = VERTEX_POINT('',#156903); +#156903 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#156904 = LINE('',#156905,#156906); +#156905 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#156906 = VECTOR('',#156907,1.); +#156907 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#156908 = ORIENTED_EDGE('',*,*,#156677,.T.); +#156909 = ORIENTED_EDGE('',*,*,#156886,.T.); +#156910 = ORIENTED_EDGE('',*,*,#156911,.T.); +#156911 = EDGE_CURVE('',#156880,#156912,#156914,.T.); +#156912 = VERTEX_POINT('',#156913); +#156913 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#156914 = LINE('',#156915,#156916); +#156915 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#156916 = VECTOR('',#156917,1.); +#156917 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156918 = ORIENTED_EDGE('',*,*,#156919,.T.); +#156919 = EDGE_CURVE('',#156912,#156920,#156922,.T.); +#156920 = VERTEX_POINT('',#156921); +#156921 = CARTESIAN_POINT('',(0.675,0.2,0.725)); +#156922 = LINE('',#156923,#156924); +#156923 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#156924 = VECTOR('',#156925,1.); +#156925 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#156926 = ORIENTED_EDGE('',*,*,#156927,.F.); +#156927 = EDGE_CURVE('',#156928,#156920,#156930,.T.); +#156928 = VERTEX_POINT('',#156929); +#156929 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#156930 = LINE('',#156931,#156932); +#156931 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#156932 = VECTOR('',#156933,1.); +#156933 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#156934 = ORIENTED_EDGE('',*,*,#156935,.F.); +#156935 = EDGE_CURVE('',#156936,#156928,#156938,.T.); +#156936 = VERTEX_POINT('',#156937); +#156937 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#156938 = LINE('',#156939,#156940); +#156939 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#156940 = VECTOR('',#156941,1.); +#156941 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#156942 = ORIENTED_EDGE('',*,*,#156943,.F.); +#156943 = EDGE_CURVE('',#156944,#156936,#156946,.T.); +#156944 = VERTEX_POINT('',#156945); +#156945 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#156946 = LINE('',#156947,#156948); +#156947 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#156948 = VECTOR('',#156949,1.); +#156949 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#156950 = ORIENTED_EDGE('',*,*,#156951,.F.); +#156951 = EDGE_CURVE('',#156952,#156944,#156954,.T.); +#156952 = VERTEX_POINT('',#156953); +#156953 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#156954 = LINE('',#156955,#156956); +#156955 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#156956 = VECTOR('',#156957,1.); +#156957 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#156958 = ORIENTED_EDGE('',*,*,#156959,.F.); +#156959 = EDGE_CURVE('',#156960,#156952,#156962,.T.); +#156960 = VERTEX_POINT('',#156961); +#156961 = CARTESIAN_POINT('',(-0.675,1.15,0.725)); +#156962 = LINE('',#156963,#156964); +#156963 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#156964 = VECTOR('',#156965,1.); +#156965 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156966 = ORIENTED_EDGE('',*,*,#156967,.F.); +#156967 = EDGE_CURVE('',#156968,#156960,#156970,.T.); +#156968 = VERTEX_POINT('',#156969); +#156969 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#156970 = LINE('',#156971,#156972); +#156971 = CARTESIAN_POINT('',(-0.7,1.15,0.725)); +#156972 = VECTOR('',#156973,1.); +#156973 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#156974 = ORIENTED_EDGE('',*,*,#156975,.T.); +#156975 = EDGE_CURVE('',#156968,#156902,#156976,.T.); +#156976 = LINE('',#156977,#156978); +#156977 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#156978 = VECTOR('',#156979,1.); +#156979 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#156980 = PLANE('',#156981); +#156981 = AXIS2_PLACEMENT_3D('',#156982,#156983,#156984); +#156982 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#156983 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#156984 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#156985 = ADVANCED_FACE('',(#156986),#156996,.F.); +#156986 = FACE_BOUND('',#156987,.F.); +#156987 = EDGE_LOOP('',(#156988,#156989,#156990,#156991)); +#156988 = ORIENTED_EDGE('',*,*,#156700,.T.); +#156989 = ORIENTED_EDGE('',*,*,#156685,.T.); +#156990 = ORIENTED_EDGE('',*,*,#156901,.F.); +#156991 = ORIENTED_EDGE('',*,*,#156992,.F.); +#156992 = EDGE_CURVE('',#156701,#156902,#156993,.T.); +#156993 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#156994,#156995), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#156994 = CARTESIAN_POINT('',(-0.7,1.405,0.575)); +#156995 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#156996 = PLANE('',#156997); +#156997 = AXIS2_PLACEMENT_3D('',#156998,#156999,#157000); +#156998 = CARTESIAN_POINT('',(-0.7,1.405,0.725)); +#156999 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#157000 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157001 = ADVANCED_FACE('',(#157002),#157026,.F.); +#157002 = FACE_BOUND('',#157003,.F.); +#157003 = EDGE_LOOP('',(#157004,#157011,#157012,#157020)); +#157004 = ORIENTED_EDGE('',*,*,#157005,.F.); +#157005 = EDGE_CURVE('',#156756,#157006,#157008,.T.); +#157006 = VERTEX_POINT('',#157007); +#157007 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157008 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157009,#157010), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157009 = CARTESIAN_POINT('',(-0.7,-1.405,0.575)); +#157010 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157011 = ORIENTED_EDGE('',*,*,#156755,.T.); +#157012 = ORIENTED_EDGE('',*,*,#157013,.T.); +#157013 = EDGE_CURVE('',#156748,#157014,#157016,.T.); +#157014 = VERTEX_POINT('',#157015); +#157015 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#157016 = LINE('',#157017,#157018); +#157017 = CARTESIAN_POINT('',(-0.7,-1.15,0.529763586955)); +#157018 = VECTOR('',#157019,1.); +#157019 = DIRECTION('',(0.,0.,1.)); +#157020 = ORIENTED_EDGE('',*,*,#157021,.F.); +#157021 = EDGE_CURVE('',#157006,#157014,#157022,.T.); +#157022 = LINE('',#157023,#157024); +#157023 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157024 = VECTOR('',#157025,1.); +#157025 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157026 = PLANE('',#157027); +#157027 = AXIS2_PLACEMENT_3D('',#157028,#157029,#157030); +#157028 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157029 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#157030 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157031 = ADVANCED_FACE('',(#157032),#157059,.F.); +#157032 = FACE_BOUND('',#157033,.F.); +#157033 = EDGE_LOOP('',(#157034,#157035,#157044,#157052)); +#157034 = ORIENTED_EDGE('',*,*,#156747,.T.); +#157035 = ORIENTED_EDGE('',*,*,#157036,.T.); +#157036 = EDGE_CURVE('',#156740,#157037,#157039,.T.); +#157037 = VERTEX_POINT('',#157038); +#157038 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#157039 = CIRCLE('',#157040,0.1); +#157040 = AXIS2_PLACEMENT_3D('',#157041,#157042,#157043); +#157041 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#157042 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#157043 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157044 = ORIENTED_EDGE('',*,*,#157045,.F.); +#157045 = EDGE_CURVE('',#157046,#157037,#157048,.T.); +#157046 = VERTEX_POINT('',#157047); +#157047 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#157048 = LINE('',#157049,#157050); +#157049 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#157050 = VECTOR('',#157051,1.); +#157051 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157052 = ORIENTED_EDGE('',*,*,#157053,.F.); +#157053 = EDGE_CURVE('',#156748,#157046,#157054,.T.); +#157054 = CIRCLE('',#157055,0.1); +#157055 = AXIS2_PLACEMENT_3D('',#157056,#157057,#157058); +#157056 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#157057 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#157058 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157059 = CYLINDRICAL_SURFACE('',#157060,0.1); +#157060 = AXIS2_PLACEMENT_3D('',#157061,#157062,#157063); +#157061 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#157062 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#157063 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157064 = ADVANCED_FACE('',(#157065),#157090,.F.); +#157065 = FACE_BOUND('',#157066,.F.); +#157066 = EDGE_LOOP('',(#157067,#157075,#157076,#157084)); +#157067 = ORIENTED_EDGE('',*,*,#157068,.F.); +#157068 = EDGE_CURVE('',#156740,#157069,#157071,.T.); +#157069 = VERTEX_POINT('',#157070); +#157070 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#157071 = LINE('',#157072,#157073); +#157072 = CARTESIAN_POINT('',(-0.7,-0.75,0.529763586955)); +#157073 = VECTOR('',#157074,1.); +#157074 = DIRECTION('',(0.,0.,1.)); +#157075 = ORIENTED_EDGE('',*,*,#156739,.T.); +#157076 = ORIENTED_EDGE('',*,*,#157077,.T.); +#157077 = EDGE_CURVE('',#156732,#157078,#157080,.T.); +#157078 = VERTEX_POINT('',#157079); +#157079 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#157080 = LINE('',#157081,#157082); +#157081 = CARTESIAN_POINT('',(-0.7,0.75,0.529763586955)); +#157082 = VECTOR('',#157083,1.); +#157083 = DIRECTION('',(0.,0.,1.)); +#157084 = ORIENTED_EDGE('',*,*,#157085,.F.); +#157085 = EDGE_CURVE('',#157069,#157078,#157086,.T.); +#157086 = LINE('',#157087,#157088); +#157087 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157088 = VECTOR('',#157089,1.); +#157089 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157090 = PLANE('',#157091); +#157091 = AXIS2_PLACEMENT_3D('',#157092,#157093,#157094); +#157092 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157093 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#157094 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157095 = ADVANCED_FACE('',(#157096),#157123,.F.); +#157096 = FACE_BOUND('',#157097,.F.); +#157097 = EDGE_LOOP('',(#157098,#157099,#157108,#157116)); +#157098 = ORIENTED_EDGE('',*,*,#156731,.T.); +#157099 = ORIENTED_EDGE('',*,*,#157100,.T.); +#157100 = EDGE_CURVE('',#156724,#157101,#157103,.T.); +#157101 = VERTEX_POINT('',#157102); +#157102 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#157103 = CIRCLE('',#157104,0.1); +#157104 = AXIS2_PLACEMENT_3D('',#157105,#157106,#157107); +#157105 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#157106 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#157107 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157108 = ORIENTED_EDGE('',*,*,#157109,.F.); +#157109 = EDGE_CURVE('',#157110,#157101,#157112,.T.); +#157110 = VERTEX_POINT('',#157111); +#157111 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#157112 = LINE('',#157113,#157114); +#157113 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#157114 = VECTOR('',#157115,1.); +#157115 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157116 = ORIENTED_EDGE('',*,*,#157117,.F.); +#157117 = EDGE_CURVE('',#156732,#157110,#157118,.T.); +#157118 = CIRCLE('',#157119,0.1); +#157119 = AXIS2_PLACEMENT_3D('',#157120,#157121,#157122); +#157120 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#157121 = DIRECTION('',(-1.144237745222E-17,-1.,-3.618690651183E-48)); +#157122 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157123 = CYLINDRICAL_SURFACE('',#157124,0.1); +#157124 = AXIS2_PLACEMENT_3D('',#157125,#157126,#157127); +#157125 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#157126 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#157127 = DIRECTION('',(2.22044604925E-15,-2.540718180781E-32,1.)); +#157128 = ADVANCED_FACE('',(#157129),#157140,.F.); +#157129 = FACE_BOUND('',#157130,.F.); +#157130 = EDGE_LOOP('',(#157131,#157137,#157138,#157139)); +#157131 = ORIENTED_EDGE('',*,*,#157132,.F.); +#157132 = EDGE_CURVE('',#156724,#156968,#157133,.T.); +#157133 = LINE('',#157134,#157135); +#157134 = CARTESIAN_POINT('',(-0.7,1.15,0.529763586955)); +#157135 = VECTOR('',#157136,1.); +#157136 = DIRECTION('',(0.,0.,1.)); +#157137 = ORIENTED_EDGE('',*,*,#156723,.T.); +#157138 = ORIENTED_EDGE('',*,*,#156992,.T.); +#157139 = ORIENTED_EDGE('',*,*,#156975,.F.); +#157140 = PLANE('',#157141); +#157141 = AXIS2_PLACEMENT_3D('',#157142,#157143,#157144); +#157142 = CARTESIAN_POINT('',(-0.7,-1.405,0.725)); +#157143 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#157144 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157145 = ADVANCED_FACE('',(#157146),#157157,.F.); +#157146 = FACE_BOUND('',#157147,.F.); +#157147 = EDGE_LOOP('',(#157148,#157149,#157150,#157156)); +#157148 = ORIENTED_EDGE('',*,*,#156879,.F.); +#157149 = ORIENTED_EDGE('',*,*,#156800,.T.); +#157150 = ORIENTED_EDGE('',*,*,#157151,.T.); +#157151 = EDGE_CURVE('',#156793,#156912,#157152,.T.); +#157152 = LINE('',#157153,#157154); +#157153 = CARTESIAN_POINT('',(0.7,0.2,0.529763586955)); +#157154 = VECTOR('',#157155,1.); +#157155 = DIRECTION('',(0.,0.,1.)); +#157156 = ORIENTED_EDGE('',*,*,#156911,.F.); +#157157 = PLANE('',#157158); +#157158 = AXIS2_PLACEMENT_3D('',#157159,#157160,#157161); +#157159 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#157160 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157161 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157162 = ADVANCED_FACE('',(#157163),#157190,.F.); +#157163 = FACE_BOUND('',#157164,.F.); +#157164 = EDGE_LOOP('',(#157165,#157166,#157175,#157183)); +#157165 = ORIENTED_EDGE('',*,*,#156792,.T.); +#157166 = ORIENTED_EDGE('',*,*,#157167,.T.); +#157167 = EDGE_CURVE('',#156785,#157168,#157170,.T.); +#157168 = VERTEX_POINT('',#157169); +#157169 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#157170 = CIRCLE('',#157171,0.1); +#157171 = AXIS2_PLACEMENT_3D('',#157172,#157173,#157174); +#157172 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#157173 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#157174 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#157175 = ORIENTED_EDGE('',*,*,#157176,.F.); +#157176 = EDGE_CURVE('',#157177,#157168,#157179,.T.); +#157177 = VERTEX_POINT('',#157178); +#157178 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#157179 = LINE('',#157180,#157181); +#157180 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#157181 = VECTOR('',#157182,1.); +#157182 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157183 = ORIENTED_EDGE('',*,*,#157184,.F.); +#157184 = EDGE_CURVE('',#156793,#157177,#157185,.T.); +#157185 = CIRCLE('',#157186,0.1); +#157186 = AXIS2_PLACEMENT_3D('',#157187,#157188,#157189); +#157187 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#157188 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#157189 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#157190 = CYLINDRICAL_SURFACE('',#157191,0.1); +#157191 = AXIS2_PLACEMENT_3D('',#157192,#157193,#157194); +#157192 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#157193 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157194 = DIRECTION('',(-2.22044604925E-15,-2.465190328815E-31,1.)); +#157195 = ADVANCED_FACE('',(#157196),#157220,.F.); +#157196 = FACE_BOUND('',#157197,.F.); +#157197 = EDGE_LOOP('',(#157198,#157206,#157207,#157214)); +#157198 = ORIENTED_EDGE('',*,*,#157199,.F.); +#157199 = EDGE_CURVE('',#156785,#157200,#157202,.T.); +#157200 = VERTEX_POINT('',#157201); +#157201 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#157202 = LINE('',#157203,#157204); +#157203 = CARTESIAN_POINT('',(0.7,-0.2,0.529763586955)); +#157204 = VECTOR('',#157205,1.); +#157205 = DIRECTION('',(0.,0.,1.)); +#157206 = ORIENTED_EDGE('',*,*,#156784,.T.); +#157207 = ORIENTED_EDGE('',*,*,#157208,.T.); +#157208 = EDGE_CURVE('',#156778,#157209,#157211,.T.); +#157209 = VERTEX_POINT('',#157210); +#157210 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#157211 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157212,#157213), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157212 = CARTESIAN_POINT('',(0.7,-1.405,0.575)); +#157213 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#157214 = ORIENTED_EDGE('',*,*,#157215,.F.); +#157215 = EDGE_CURVE('',#157200,#157209,#157216,.T.); +#157216 = LINE('',#157217,#157218); +#157217 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#157218 = VECTOR('',#157219,1.); +#157219 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157220 = PLANE('',#157221); +#157221 = AXIS2_PLACEMENT_3D('',#157222,#157223,#157224); +#157222 = CARTESIAN_POINT('',(0.7,1.405,0.725)); +#157223 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157224 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157225 = ADVANCED_FACE('',(#157226),#157243,.F.); +#157226 = FACE_BOUND('',#157227,.F.); +#157227 = EDGE_LOOP('',(#157228,#157229,#157230,#157238)); +#157228 = ORIENTED_EDGE('',*,*,#156817,.T.); +#157229 = ORIENTED_EDGE('',*,*,#157005,.T.); +#157230 = ORIENTED_EDGE('',*,*,#157231,.F.); +#157231 = EDGE_CURVE('',#157232,#157006,#157234,.T.); +#157232 = VERTEX_POINT('',#157233); +#157233 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#157234 = LINE('',#157235,#157236); +#157235 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#157236 = VECTOR('',#157237,1.); +#157237 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157238 = ORIENTED_EDGE('',*,*,#157239,.F.); +#157239 = EDGE_CURVE('',#156818,#157232,#157240,.T.); +#157240 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157241,#157242), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157241 = CARTESIAN_POINT('',(-0.605,-1.5,0.575)); +#157242 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#157243 = PLANE('',#157244); +#157244 = AXIS2_PLACEMENT_3D('',#157245,#157246,#157247); +#157245 = CARTESIAN_POINT('',(-0.605,-1.5,0.725)); +#157246 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157247 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157248 = ADVANCED_FACE('',(#157249),#157266,.F.); +#157249 = FACE_BOUND('',#157250,.F.); +#157250 = EDGE_LOOP('',(#157251,#157252,#157259,#157265)); +#157251 = ORIENTED_EDGE('',*,*,#156846,.T.); +#157252 = ORIENTED_EDGE('',*,*,#157253,.T.); +#157253 = EDGE_CURVE('',#156840,#157254,#157256,.T.); +#157254 = VERTEX_POINT('',#157255); +#157255 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#157256 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157257,#157258), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157257 = CARTESIAN_POINT('',(0.605,-1.5,0.575)); +#157258 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#157259 = ORIENTED_EDGE('',*,*,#157260,.F.); +#157260 = EDGE_CURVE('',#157209,#157254,#157261,.T.); +#157261 = LINE('',#157262,#157263); +#157262 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#157263 = VECTOR('',#157264,1.); +#157264 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#157265 = ORIENTED_EDGE('',*,*,#157208,.F.); +#157266 = PLANE('',#157267); +#157267 = AXIS2_PLACEMENT_3D('',#157268,#157269,#157270); +#157268 = CARTESIAN_POINT('',(0.7,-1.405,0.725)); +#157269 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157270 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#157271 = ADVANCED_FACE('',(#157272),#157283,.F.); +#157272 = FACE_BOUND('',#157273,.F.); +#157273 = EDGE_LOOP('',(#157274,#157275,#157276,#157282)); +#157274 = ORIENTED_EDGE('',*,*,#156863,.T.); +#157275 = ORIENTED_EDGE('',*,*,#157239,.T.); +#157276 = ORIENTED_EDGE('',*,*,#157277,.F.); +#157277 = EDGE_CURVE('',#157254,#157232,#157278,.T.); +#157278 = LINE('',#157279,#157280); +#157279 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#157280 = VECTOR('',#157281,1.); +#157281 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157282 = ORIENTED_EDGE('',*,*,#157253,.F.); +#157283 = PLANE('',#157284); +#157284 = AXIS2_PLACEMENT_3D('',#157285,#157286,#157287); +#157285 = CARTESIAN_POINT('',(0.605,-1.5,0.725)); +#157286 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157287 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157288 = ADVANCED_FACE('',(#157289),#157312,.F.); +#157289 = FACE_BOUND('',#157290,.F.); +#157290 = EDGE_LOOP('',(#157291,#157299,#157305,#157306)); +#157291 = ORIENTED_EDGE('',*,*,#157292,.F.); +#157292 = EDGE_CURVE('',#157078,#157293,#157295,.T.); +#157293 = VERTEX_POINT('',#157294); +#157294 = CARTESIAN_POINT('',(-0.675,0.75,0.725)); +#157295 = LINE('',#157296,#157297); +#157296 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#157297 = VECTOR('',#157298,1.); +#157298 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157299 = ORIENTED_EDGE('',*,*,#157300,.T.); +#157300 = EDGE_CURVE('',#157078,#156968,#157301,.T.); +#157301 = LINE('',#157302,#157303); +#157302 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#157303 = VECTOR('',#157304,1.); +#157304 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157305 = ORIENTED_EDGE('',*,*,#156967,.T.); +#157306 = ORIENTED_EDGE('',*,*,#157307,.F.); +#157307 = EDGE_CURVE('',#157293,#156960,#157308,.T.); +#157308 = LINE('',#157309,#157310); +#157309 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157310 = VECTOR('',#157311,1.); +#157311 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157312 = PLANE('',#157313); +#157313 = AXIS2_PLACEMENT_3D('',#157314,#157315,#157316); +#157314 = CARTESIAN_POINT('',(-0.7,0.75,0.725)); +#157315 = DIRECTION('',(0.,0.,-1.)); +#157316 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157317 = ADVANCED_FACE('',(#157318),#157366,.F.); +#157318 = FACE_BOUND('',#157319,.F.); +#157319 = EDGE_LOOP('',(#157320,#157330,#157338,#157344,#157345,#157346, + #157353,#157361)); +#157320 = ORIENTED_EDGE('',*,*,#157321,.T.); +#157321 = EDGE_CURVE('',#157322,#157324,#157326,.T.); +#157322 = VERTEX_POINT('',#157323); +#157323 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157324 = VERTEX_POINT('',#157325); +#157325 = CARTESIAN_POINT('',(-0.675,-1.15,0.725)); +#157326 = LINE('',#157327,#157328); +#157327 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157328 = VECTOR('',#157329,1.); +#157329 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157330 = ORIENTED_EDGE('',*,*,#157331,.T.); +#157331 = EDGE_CURVE('',#157324,#157332,#157334,.T.); +#157332 = VERTEX_POINT('',#157333); +#157333 = CARTESIAN_POINT('',(-0.675,-0.75,0.725)); +#157334 = LINE('',#157335,#157336); +#157335 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157336 = VECTOR('',#157337,1.); +#157337 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157338 = ORIENTED_EDGE('',*,*,#157339,.T.); +#157339 = EDGE_CURVE('',#157332,#157293,#157340,.T.); +#157340 = LINE('',#157341,#157342); +#157341 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157342 = VECTOR('',#157343,1.); +#157343 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157344 = ORIENTED_EDGE('',*,*,#157307,.T.); +#157345 = ORIENTED_EDGE('',*,*,#156959,.T.); +#157346 = ORIENTED_EDGE('',*,*,#157347,.T.); +#157347 = EDGE_CURVE('',#156952,#157348,#157350,.T.); +#157348 = VERTEX_POINT('',#157349); +#157349 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#157350 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157351,#157352), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157351 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#157352 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#157353 = ORIENTED_EDGE('',*,*,#157354,.F.); +#157354 = EDGE_CURVE('',#157355,#157348,#157357,.T.); +#157355 = VERTEX_POINT('',#157356); +#157356 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#157357 = LINE('',#157358,#157359); +#157358 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#157359 = VECTOR('',#157360,1.); +#157360 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#157361 = ORIENTED_EDGE('',*,*,#157362,.F.); +#157362 = EDGE_CURVE('',#157322,#157355,#157363,.T.); +#157363 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157364,#157365), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157364 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157365 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#157366 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#157367,#157368) + ,(#157369,#157370 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#157367 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#157368 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#157369 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#157370 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#157371 = ADVANCED_FACE('',(#157372),#157389,.F.); +#157372 = FACE_BOUND('',#157373,.F.); +#157373 = EDGE_LOOP('',(#157374,#157375,#157382,#157388)); +#157374 = ORIENTED_EDGE('',*,*,#156951,.T.); +#157375 = ORIENTED_EDGE('',*,*,#157376,.T.); +#157376 = EDGE_CURVE('',#156944,#157377,#157379,.T.); +#157377 = VERTEX_POINT('',#157378); +#157378 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#157379 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157380,#157381), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157380 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#157381 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#157382 = ORIENTED_EDGE('',*,*,#157383,.F.); +#157383 = EDGE_CURVE('',#157348,#157377,#157384,.T.); +#157384 = LINE('',#157385,#157386); +#157385 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#157386 = VECTOR('',#157387,1.); +#157387 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#157388 = ORIENTED_EDGE('',*,*,#157347,.F.); +#157389 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#157390,#157391) + ,(#157392,#157393 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#157390 = CARTESIAN_POINT('',(-0.675,1.3925,0.725)); +#157391 = CARTESIAN_POINT('',(-0.608243103516,1.359121551758,1.2)); +#157392 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#157393 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#157394 = ADVANCED_FACE('',(#157395),#157412,.F.); +#157395 = FACE_BOUND('',#157396,.F.); +#157396 = EDGE_LOOP('',(#157397,#157398,#157405,#157411)); +#157397 = ORIENTED_EDGE('',*,*,#156943,.T.); +#157398 = ORIENTED_EDGE('',*,*,#157399,.T.); +#157399 = EDGE_CURVE('',#156936,#157400,#157402,.T.); +#157400 = VERTEX_POINT('',#157401); +#157401 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#157402 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157403,#157404), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157403 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#157404 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#157405 = ORIENTED_EDGE('',*,*,#157406,.F.); +#157406 = EDGE_CURVE('',#157377,#157400,#157407,.T.); +#157407 = LINE('',#157408,#157409); +#157408 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#157409 = VECTOR('',#157410,1.); +#157410 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#157411 = ORIENTED_EDGE('',*,*,#157376,.F.); +#157412 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#157413,#157414) + ,(#157415,#157416 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#157413 = CARTESIAN_POINT('',(-0.5925,1.475,0.725)); +#157414 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#157415 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#157416 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#157417 = ADVANCED_FACE('',(#157418),#157435,.F.); +#157418 = FACE_BOUND('',#157419,.F.); +#157419 = EDGE_LOOP('',(#157420,#157421,#157428,#157434)); +#157420 = ORIENTED_EDGE('',*,*,#156935,.T.); +#157421 = ORIENTED_EDGE('',*,*,#157422,.T.); +#157422 = EDGE_CURVE('',#156928,#157423,#157425,.T.); +#157423 = VERTEX_POINT('',#157424); +#157424 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#157425 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157426,#157427), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157426 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#157427 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#157428 = ORIENTED_EDGE('',*,*,#157429,.F.); +#157429 = EDGE_CURVE('',#157400,#157423,#157430,.T.); +#157430 = LINE('',#157431,#157432); +#157431 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#157432 = VECTOR('',#157433,1.); +#157433 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#157434 = ORIENTED_EDGE('',*,*,#157399,.F.); +#157435 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#157436,#157437) + ,(#157438,#157439 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#157436 = CARTESIAN_POINT('',(0.5925,1.475,0.725)); +#157437 = CARTESIAN_POINT('',(0.559121551758,1.408243103516,1.2)); +#157438 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#157439 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#157440 = ADVANCED_FACE('',(#157441),#157474,.F.); +#157441 = FACE_BOUND('',#157442,.F.); +#157442 = EDGE_LOOP('',(#157443,#157444,#157452,#157460,#157467,#157473) + ); +#157443 = ORIENTED_EDGE('',*,*,#156927,.T.); +#157444 = ORIENTED_EDGE('',*,*,#157445,.T.); +#157445 = EDGE_CURVE('',#156920,#157446,#157448,.T.); +#157446 = VERTEX_POINT('',#157447); +#157447 = CARTESIAN_POINT('',(0.675,-0.2,0.725)); +#157448 = LINE('',#157449,#157450); +#157449 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#157450 = VECTOR('',#157451,1.); +#157451 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157452 = ORIENTED_EDGE('',*,*,#157453,.T.); +#157453 = EDGE_CURVE('',#157446,#157454,#157456,.T.); +#157454 = VERTEX_POINT('',#157455); +#157455 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#157456 = LINE('',#157457,#157458); +#157457 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#157458 = VECTOR('',#157459,1.); +#157459 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157460 = ORIENTED_EDGE('',*,*,#157461,.T.); +#157461 = EDGE_CURVE('',#157454,#157462,#157464,.T.); +#157462 = VERTEX_POINT('',#157463); +#157463 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#157464 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#157465,#157466), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#157465 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#157466 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#157467 = ORIENTED_EDGE('',*,*,#157468,.F.); +#157468 = EDGE_CURVE('',#157423,#157462,#157469,.T.); +#157469 = LINE('',#157470,#157471); +#157470 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#157471 = VECTOR('',#157472,1.); +#157472 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157473 = ORIENTED_EDGE('',*,*,#157422,.F.); +#157474 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#157475,#157476) + ,(#157477,#157478 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.785),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#157475 = CARTESIAN_POINT('',(0.675,1.3925,0.725)); +#157476 = CARTESIAN_POINT('',(0.608243103516,1.359121551758,1.2)); +#157477 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#157478 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#157479 = ADVANCED_FACE('',(#157480),#157496,.F.); +#157480 = FACE_BOUND('',#157481,.F.); +#157481 = EDGE_LOOP('',(#157482,#157483,#157489,#157495)); +#157482 = ORIENTED_EDGE('',*,*,#156919,.F.); +#157483 = ORIENTED_EDGE('',*,*,#157484,.T.); +#157484 = EDGE_CURVE('',#156912,#157200,#157485,.T.); +#157485 = LINE('',#157486,#157487); +#157486 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#157487 = VECTOR('',#157488,1.); +#157488 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157489 = ORIENTED_EDGE('',*,*,#157490,.T.); +#157490 = EDGE_CURVE('',#157200,#157446,#157491,.T.); +#157491 = LINE('',#157492,#157493); +#157492 = CARTESIAN_POINT('',(0.7,-0.2,0.725)); +#157493 = VECTOR('',#157494,1.); +#157494 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157495 = ORIENTED_EDGE('',*,*,#157445,.F.); +#157496 = PLANE('',#157497); +#157497 = AXIS2_PLACEMENT_3D('',#157498,#157499,#157500); +#157498 = CARTESIAN_POINT('',(0.7,0.2,0.725)); +#157499 = DIRECTION('',(0.,0.,-1.)); +#157500 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#157501 = ADVANCED_FACE('',(#157502),#157540,.F.); +#157502 = FACE_BOUND('',#157503,.F.); +#157503 = EDGE_LOOP('',(#157504,#157505,#157506,#157507,#157508,#157509, + #157510,#157516,#157517,#157525,#157533,#157539)); +#157504 = ORIENTED_EDGE('',*,*,#157490,.F.); +#157505 = ORIENTED_EDGE('',*,*,#157215,.T.); +#157506 = ORIENTED_EDGE('',*,*,#157260,.T.); +#157507 = ORIENTED_EDGE('',*,*,#157277,.T.); +#157508 = ORIENTED_EDGE('',*,*,#157231,.T.); +#157509 = ORIENTED_EDGE('',*,*,#157021,.T.); +#157510 = ORIENTED_EDGE('',*,*,#157511,.T.); +#157511 = EDGE_CURVE('',#157014,#157324,#157512,.T.); +#157512 = LINE('',#157513,#157514); +#157513 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#157514 = VECTOR('',#157515,1.); +#157515 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157516 = ORIENTED_EDGE('',*,*,#157321,.F.); +#157517 = ORIENTED_EDGE('',*,*,#157518,.F.); +#157518 = EDGE_CURVE('',#157519,#157322,#157521,.T.); +#157519 = VERTEX_POINT('',#157520); +#157520 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#157521 = LINE('',#157522,#157523); +#157522 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#157523 = VECTOR('',#157524,1.); +#157524 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#157525 = ORIENTED_EDGE('',*,*,#157526,.F.); +#157526 = EDGE_CURVE('',#157527,#157519,#157529,.T.); +#157527 = VERTEX_POINT('',#157528); +#157528 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#157529 = LINE('',#157530,#157531); +#157530 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#157531 = VECTOR('',#157532,1.); +#157532 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157533 = ORIENTED_EDGE('',*,*,#157534,.F.); +#157534 = EDGE_CURVE('',#157454,#157527,#157535,.T.); +#157535 = LINE('',#157536,#157537); +#157536 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#157537 = VECTOR('',#157538,1.); +#157538 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#157539 = ORIENTED_EDGE('',*,*,#157453,.F.); +#157540 = PLANE('',#157541); +#157541 = AXIS2_PLACEMENT_3D('',#157542,#157543,#157544); +#157542 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#157543 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#157544 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#157545 = ADVANCED_FACE('',(#157546),#157615,.F.); +#157546 = FACE_BOUND('',#157547,.F.); +#157547 = EDGE_LOOP('',(#157548,#157549,#157550,#157558,#157567,#157575, + #157583,#157591,#157600,#157608)); +#157548 = ORIENTED_EDGE('',*,*,#157013,.F.); +#157549 = ORIENTED_EDGE('',*,*,#157053,.T.); +#157550 = ORIENTED_EDGE('',*,*,#157551,.T.); +#157551 = EDGE_CURVE('',#157046,#157552,#157554,.T.); +#157552 = VERTEX_POINT('',#157553); +#157553 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#157554 = LINE('',#157555,#157556); +#157555 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#157556 = VECTOR('',#157557,1.); +#157557 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157558 = ORIENTED_EDGE('',*,*,#157559,.T.); +#157559 = EDGE_CURVE('',#157552,#157560,#157562,.T.); +#157560 = VERTEX_POINT('',#157561); +#157561 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17) + ); +#157562 = CIRCLE('',#157563,0.25); +#157563 = AXIS2_PLACEMENT_3D('',#157564,#157565,#157566); +#157564 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#157565 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#157566 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#157567 = ORIENTED_EDGE('',*,*,#157568,.T.); +#157568 = EDGE_CURVE('',#157560,#157569,#157571,.T.); +#157569 = VERTEX_POINT('',#157570); +#157570 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#157571 = LINE('',#157572,#157573); +#157572 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17) + ); +#157573 = VECTOR('',#157574,1.); +#157574 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#157575 = ORIENTED_EDGE('',*,*,#157576,.T.); +#157576 = EDGE_CURVE('',#157569,#157577,#157579,.T.); +#157577 = VERTEX_POINT('',#157578); +#157578 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#157579 = LINE('',#157580,#157581); +#157580 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#157581 = VECTOR('',#157582,1.); +#157582 = DIRECTION('',(0.,0.,1.)); +#157583 = ORIENTED_EDGE('',*,*,#157584,.T.); +#157584 = EDGE_CURVE('',#157577,#157585,#157587,.T.); +#157585 = VERTEX_POINT('',#157586); +#157586 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#157587 = LINE('',#157588,#157589); +#157588 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#157589 = VECTOR('',#157590,1.); +#157590 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157591 = ORIENTED_EDGE('',*,*,#157592,.T.); +#157592 = EDGE_CURVE('',#157585,#157593,#157595,.T.); +#157593 = VERTEX_POINT('',#157594); +#157594 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#157595 = CIRCLE('',#157596,0.1); +#157596 = AXIS2_PLACEMENT_3D('',#157597,#157598,#157599); +#157597 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#157598 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#157599 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#157600 = ORIENTED_EDGE('',*,*,#157601,.T.); +#157601 = EDGE_CURVE('',#157593,#157602,#157604,.T.); +#157602 = VERTEX_POINT('',#157603); +#157603 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#157604 = LINE('',#157605,#157606); +#157605 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#157606 = VECTOR('',#157607,1.); +#157607 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#157608 = ORIENTED_EDGE('',*,*,#157609,.T.); +#157609 = EDGE_CURVE('',#157602,#157014,#157610,.T.); +#157610 = CIRCLE('',#157611,0.25); +#157611 = AXIS2_PLACEMENT_3D('',#157612,#157613,#157614); +#157612 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#157613 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#157614 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#157615 = PLANE('',#157616); +#157616 = AXIS2_PLACEMENT_3D('',#157617,#157618,#157619); +#157617 = CARTESIAN_POINT('',(-0.931323080229,-1.15,0.33452717391)); +#157618 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157619 = DIRECTION('',(0.,-0.,1.)); +#157620 = ADVANCED_FACE('',(#157621),#157639,.F.); +#157621 = FACE_BOUND('',#157622,.F.); +#157622 = EDGE_LOOP('',(#157623,#157624,#157632,#157638)); +#157623 = ORIENTED_EDGE('',*,*,#157045,.T.); +#157624 = ORIENTED_EDGE('',*,*,#157625,.T.); +#157625 = EDGE_CURVE('',#157037,#157626,#157628,.T.); +#157626 = VERTEX_POINT('',#157627); +#157627 = CARTESIAN_POINT('',(-0.843471632406,-0.75,0.206587955583)); +#157628 = LINE('',#157629,#157630); +#157629 = CARTESIAN_POINT('',(-0.798480775301,-0.75,0.492364817767)); +#157630 = VECTOR('',#157631,1.); +#157631 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157632 = ORIENTED_EDGE('',*,*,#157633,.F.); +#157633 = EDGE_CURVE('',#157552,#157626,#157634,.T.); +#157634 = LINE('',#157635,#157636); +#157635 = CARTESIAN_POINT('',(-0.843471632406,-1.15,0.206587955583)); +#157636 = VECTOR('',#157637,1.); +#157637 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157638 = ORIENTED_EDGE('',*,*,#157551,.F.); +#157639 = PLANE('',#157640); +#157640 = AXIS2_PLACEMENT_3D('',#157641,#157642,#157643); +#157641 = CARTESIAN_POINT('',(-0.798480775301,-1.15,0.492364817767)); +#157642 = DIRECTION('',(-0.987833053268,1.130315865527E-17, + 0.155518033909)); +#157643 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157644 = ADVANCED_FACE('',(#157645),#157707,.T.); +#157645 = FACE_BOUND('',#157646,.T.); +#157646 = EDGE_LOOP('',(#157647,#157648,#157649,#157650,#157659,#157667, + #157675,#157683,#157692,#157700)); +#157647 = ORIENTED_EDGE('',*,*,#157068,.F.); +#157648 = ORIENTED_EDGE('',*,*,#157036,.T.); +#157649 = ORIENTED_EDGE('',*,*,#157625,.T.); +#157650 = ORIENTED_EDGE('',*,*,#157651,.T.); +#157651 = EDGE_CURVE('',#157626,#157652,#157654,.T.); +#157652 = VERTEX_POINT('',#157653); +#157653 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17) + ); +#157654 = CIRCLE('',#157655,0.25); +#157655 = AXIS2_PLACEMENT_3D('',#157656,#157657,#157658); +#157656 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#157657 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#157658 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#157659 = ORIENTED_EDGE('',*,*,#157660,.T.); +#157660 = EDGE_CURVE('',#157652,#157661,#157663,.T.); +#157661 = VERTEX_POINT('',#157662); +#157662 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#157663 = LINE('',#157664,#157665); +#157664 = CARTESIAN_POINT('',(-1.089673570659,-0.75,5.551115123126E-17) + ); +#157665 = VECTOR('',#157666,1.); +#157666 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#157667 = ORIENTED_EDGE('',*,*,#157668,.T.); +#157668 = EDGE_CURVE('',#157661,#157669,#157671,.T.); +#157669 = VERTEX_POINT('',#157670); +#157670 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#157671 = LINE('',#157672,#157673); +#157672 = CARTESIAN_POINT('',(-1.25,-0.75,5.551115123126E-17)); +#157673 = VECTOR('',#157674,1.); +#157674 = DIRECTION('',(0.,0.,1.)); +#157675 = ORIENTED_EDGE('',*,*,#157676,.T.); +#157676 = EDGE_CURVE('',#157669,#157677,#157679,.T.); +#157677 = VERTEX_POINT('',#157678); +#157678 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.15)); +#157679 = LINE('',#157680,#157681); +#157680 = CARTESIAN_POINT('',(-1.25,-0.75,0.15)); +#157681 = VECTOR('',#157682,1.); +#157682 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157683 = ORIENTED_EDGE('',*,*,#157684,.T.); +#157684 = EDGE_CURVE('',#157677,#157685,#157687,.T.); +#157685 = VERTEX_POINT('',#157686); +#157686 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#157687 = CIRCLE('',#157688,0.1); +#157688 = AXIS2_PLACEMENT_3D('',#157689,#157690,#157691); +#157689 = CARTESIAN_POINT('',(-1.089673570659,-0.75,0.25)); +#157690 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#157691 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#157692 = ORIENTED_EDGE('',*,*,#157693,.T.); +#157693 = EDGE_CURVE('',#157685,#157694,#157696,.T.); +#157694 = VERTEX_POINT('',#157695); +#157695 = CARTESIAN_POINT('',(-0.946201938253,-0.75,0.518412044417)); +#157696 = LINE('',#157697,#157698); +#157697 = CARTESIAN_POINT('',(-0.991192795358,-0.75,0.232635182233)); +#157698 = VECTOR('',#157699,1.); +#157699 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#157700 = ORIENTED_EDGE('',*,*,#157701,.T.); +#157701 = EDGE_CURVE('',#157694,#157069,#157702,.T.); +#157702 = CIRCLE('',#157703,0.25); +#157703 = AXIS2_PLACEMENT_3D('',#157704,#157705,#157706); +#157704 = CARTESIAN_POINT('',(-0.7,-0.75,0.475)); +#157705 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#157706 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#157707 = PLANE('',#157708); +#157708 = AXIS2_PLACEMENT_3D('',#157709,#157710,#157711); +#157709 = CARTESIAN_POINT('',(-0.931323080229,-0.75,0.33452717391)); +#157710 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157711 = DIRECTION('',(0.,-0.,1.)); +#157712 = ADVANCED_FACE('',(#157713),#157724,.F.); +#157713 = FACE_BOUND('',#157714,.F.); +#157714 = EDGE_LOOP('',(#157715,#157716,#157717,#157718)); +#157715 = ORIENTED_EDGE('',*,*,#157085,.T.); +#157716 = ORIENTED_EDGE('',*,*,#157292,.T.); +#157717 = ORIENTED_EDGE('',*,*,#157339,.F.); +#157718 = ORIENTED_EDGE('',*,*,#157719,.F.); +#157719 = EDGE_CURVE('',#157069,#157332,#157720,.T.); +#157720 = LINE('',#157721,#157722); +#157721 = CARTESIAN_POINT('',(-0.7,-0.75,0.725)); +#157722 = VECTOR('',#157723,1.); +#157723 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157724 = PLANE('',#157725); +#157725 = AXIS2_PLACEMENT_3D('',#157726,#157727,#157728); +#157726 = CARTESIAN_POINT('',(-1.486299604971E-16,1.4875,0.725)); +#157727 = DIRECTION('',(1.022886882533E-31,-6.310887241768E-27,-1.)); +#157728 = DIRECTION('',(1.,1.217738924546E-16,1.022886882525E-31)); +#157729 = ADVANCED_FACE('',(#157730),#157799,.F.); +#157730 = FACE_BOUND('',#157731,.F.); +#157731 = EDGE_LOOP('',(#157732,#157733,#157734,#157742,#157751,#157759, + #157767,#157775,#157784,#157792)); +#157732 = ORIENTED_EDGE('',*,*,#157077,.F.); +#157733 = ORIENTED_EDGE('',*,*,#157117,.T.); +#157734 = ORIENTED_EDGE('',*,*,#157735,.T.); +#157735 = EDGE_CURVE('',#157110,#157736,#157738,.T.); +#157736 = VERTEX_POINT('',#157737); +#157737 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#157738 = LINE('',#157739,#157740); +#157739 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#157740 = VECTOR('',#157741,1.); +#157741 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157742 = ORIENTED_EDGE('',*,*,#157743,.T.); +#157743 = EDGE_CURVE('',#157736,#157744,#157746,.T.); +#157744 = VERTEX_POINT('',#157745); +#157745 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#157746 = CIRCLE('',#157747,0.25); +#157747 = AXIS2_PLACEMENT_3D('',#157748,#157749,#157750); +#157748 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#157749 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#157750 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#157751 = ORIENTED_EDGE('',*,*,#157752,.T.); +#157752 = EDGE_CURVE('',#157744,#157753,#157755,.T.); +#157753 = VERTEX_POINT('',#157754); +#157754 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#157755 = LINE('',#157756,#157757); +#157756 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#157757 = VECTOR('',#157758,1.); +#157758 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#157759 = ORIENTED_EDGE('',*,*,#157760,.T.); +#157760 = EDGE_CURVE('',#157753,#157761,#157763,.T.); +#157761 = VERTEX_POINT('',#157762); +#157762 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#157763 = LINE('',#157764,#157765); +#157764 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#157765 = VECTOR('',#157766,1.); +#157766 = DIRECTION('',(0.,0.,1.)); +#157767 = ORIENTED_EDGE('',*,*,#157768,.T.); +#157768 = EDGE_CURVE('',#157761,#157769,#157771,.T.); +#157769 = VERTEX_POINT('',#157770); +#157770 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#157771 = LINE('',#157772,#157773); +#157772 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#157773 = VECTOR('',#157774,1.); +#157774 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157775 = ORIENTED_EDGE('',*,*,#157776,.T.); +#157776 = EDGE_CURVE('',#157769,#157777,#157779,.T.); +#157777 = VERTEX_POINT('',#157778); +#157778 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#157779 = CIRCLE('',#157780,0.1); +#157780 = AXIS2_PLACEMENT_3D('',#157781,#157782,#157783); +#157781 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#157782 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#157783 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#157784 = ORIENTED_EDGE('',*,*,#157785,.T.); +#157785 = EDGE_CURVE('',#157777,#157786,#157788,.T.); +#157786 = VERTEX_POINT('',#157787); +#157787 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#157788 = LINE('',#157789,#157790); +#157789 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#157790 = VECTOR('',#157791,1.); +#157791 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#157792 = ORIENTED_EDGE('',*,*,#157793,.T.); +#157793 = EDGE_CURVE('',#157786,#157078,#157794,.T.); +#157794 = CIRCLE('',#157795,0.25); +#157795 = AXIS2_PLACEMENT_3D('',#157796,#157797,#157798); +#157796 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#157797 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#157798 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#157799 = PLANE('',#157800); +#157800 = AXIS2_PLACEMENT_3D('',#157801,#157802,#157803); +#157801 = CARTESIAN_POINT('',(-0.931323080229,0.75,0.33452717391)); +#157802 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157803 = DIRECTION('',(0.,-0.,1.)); +#157804 = ADVANCED_FACE('',(#157805),#157823,.F.); +#157805 = FACE_BOUND('',#157806,.F.); +#157806 = EDGE_LOOP('',(#157807,#157808,#157816,#157822)); +#157807 = ORIENTED_EDGE('',*,*,#157109,.T.); +#157808 = ORIENTED_EDGE('',*,*,#157809,.T.); +#157809 = EDGE_CURVE('',#157101,#157810,#157812,.T.); +#157810 = VERTEX_POINT('',#157811); +#157811 = CARTESIAN_POINT('',(-0.843471632406,1.15,0.206587955583)); +#157812 = LINE('',#157813,#157814); +#157813 = CARTESIAN_POINT('',(-0.798480775301,1.15,0.492364817767)); +#157814 = VECTOR('',#157815,1.); +#157815 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157816 = ORIENTED_EDGE('',*,*,#157817,.F.); +#157817 = EDGE_CURVE('',#157736,#157810,#157818,.T.); +#157818 = LINE('',#157819,#157820); +#157819 = CARTESIAN_POINT('',(-0.843471632406,0.75,0.206587955583)); +#157820 = VECTOR('',#157821,1.); +#157821 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157822 = ORIENTED_EDGE('',*,*,#157735,.F.); +#157823 = PLANE('',#157824); +#157824 = AXIS2_PLACEMENT_3D('',#157825,#157826,#157827); +#157825 = CARTESIAN_POINT('',(-0.798480775301,0.75,0.492364817767)); +#157826 = DIRECTION('',(-0.987833053268,1.130315865527E-17, + 0.155518033909)); +#157827 = DIRECTION('',(-0.155518033909,1.779496044609E-18, + -0.987833053268)); +#157828 = ADVANCED_FACE('',(#157829),#157891,.T.); +#157829 = FACE_BOUND('',#157830,.T.); +#157830 = EDGE_LOOP('',(#157831,#157832,#157833,#157834,#157843,#157851, + #157859,#157867,#157876,#157884)); +#157831 = ORIENTED_EDGE('',*,*,#157132,.F.); +#157832 = ORIENTED_EDGE('',*,*,#157100,.T.); +#157833 = ORIENTED_EDGE('',*,*,#157809,.T.); +#157834 = ORIENTED_EDGE('',*,*,#157835,.T.); +#157835 = EDGE_CURVE('',#157810,#157836,#157838,.T.); +#157836 = VERTEX_POINT('',#157837); +#157837 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#157838 = CIRCLE('',#157839,0.25); +#157839 = AXIS2_PLACEMENT_3D('',#157840,#157841,#157842); +#157840 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#157841 = DIRECTION('',(1.144237745222E-17,1.,4.885826546933E-34)); +#157842 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#157843 = ORIENTED_EDGE('',*,*,#157844,.T.); +#157844 = EDGE_CURVE('',#157836,#157845,#157847,.T.); +#157845 = VERTEX_POINT('',#157846); +#157846 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#157847 = LINE('',#157848,#157849); +#157848 = CARTESIAN_POINT('',(-1.089673570659,1.15,5.551115123126E-17)); +#157849 = VECTOR('',#157850,1.); +#157850 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#157851 = ORIENTED_EDGE('',*,*,#157852,.T.); +#157852 = EDGE_CURVE('',#157845,#157853,#157855,.T.); +#157853 = VERTEX_POINT('',#157854); +#157854 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#157855 = LINE('',#157856,#157857); +#157856 = CARTESIAN_POINT('',(-1.25,1.15,5.551115123126E-17)); +#157857 = VECTOR('',#157858,1.); +#157858 = DIRECTION('',(0.,0.,1.)); +#157859 = ORIENTED_EDGE('',*,*,#157860,.T.); +#157860 = EDGE_CURVE('',#157853,#157861,#157863,.T.); +#157861 = VERTEX_POINT('',#157862); +#157862 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.15)); +#157863 = LINE('',#157864,#157865); +#157864 = CARTESIAN_POINT('',(-1.25,1.15,0.15)); +#157865 = VECTOR('',#157866,1.); +#157866 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#157867 = ORIENTED_EDGE('',*,*,#157868,.T.); +#157868 = EDGE_CURVE('',#157861,#157869,#157871,.T.); +#157869 = VERTEX_POINT('',#157870); +#157870 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#157871 = CIRCLE('',#157872,0.1); +#157872 = AXIS2_PLACEMENT_3D('',#157873,#157874,#157875); +#157873 = CARTESIAN_POINT('',(-1.089673570659,1.15,0.25)); +#157874 = DIRECTION('',(-1.144237745222E-17,-1.,1.280277572762E-47)); +#157875 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#157876 = ORIENTED_EDGE('',*,*,#157877,.T.); +#157877 = EDGE_CURVE('',#157869,#157878,#157880,.T.); +#157878 = VERTEX_POINT('',#157879); +#157879 = CARTESIAN_POINT('',(-0.946201938253,1.15,0.518412044417)); +#157880 = LINE('',#157881,#157882); +#157881 = CARTESIAN_POINT('',(-0.991192795358,1.15,0.232635182233)); +#157882 = VECTOR('',#157883,1.); +#157883 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#157884 = ORIENTED_EDGE('',*,*,#157885,.T.); +#157885 = EDGE_CURVE('',#157878,#156968,#157886,.T.); +#157886 = CIRCLE('',#157887,0.25); +#157887 = AXIS2_PLACEMENT_3D('',#157888,#157889,#157890); +#157888 = CARTESIAN_POINT('',(-0.7,1.15,0.475)); +#157889 = DIRECTION('',(1.144237745222E-17,1.,1.092485064951E-34)); +#157890 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#157891 = PLANE('',#157892); +#157892 = AXIS2_PLACEMENT_3D('',#157893,#157894,#157895); +#157893 = CARTESIAN_POINT('',(-0.931323080229,1.15,0.33452717391)); +#157894 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#157895 = DIRECTION('',(0.,-0.,1.)); +#157896 = ADVANCED_FACE('',(#157897),#157966,.F.); +#157897 = FACE_BOUND('',#157898,.F.); +#157898 = EDGE_LOOP('',(#157899,#157900,#157901,#157909,#157918,#157926, + #157934,#157942,#157951,#157959)); +#157899 = ORIENTED_EDGE('',*,*,#157151,.F.); +#157900 = ORIENTED_EDGE('',*,*,#157184,.T.); +#157901 = ORIENTED_EDGE('',*,*,#157902,.T.); +#157902 = EDGE_CURVE('',#157177,#157903,#157905,.T.); +#157903 = VERTEX_POINT('',#157904); +#157904 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#157905 = LINE('',#157906,#157907); +#157906 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#157907 = VECTOR('',#157908,1.); +#157908 = DIRECTION('',(0.155518033909,1.726597019897E-17, + -0.987833053268)); +#157909 = ORIENTED_EDGE('',*,*,#157910,.T.); +#157910 = EDGE_CURVE('',#157903,#157911,#157913,.T.); +#157911 = VERTEX_POINT('',#157912); +#157912 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#157913 = CIRCLE('',#157914,0.25); +#157914 = AXIS2_PLACEMENT_3D('',#157915,#157916,#157917); +#157915 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#157916 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#157917 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#157918 = ORIENTED_EDGE('',*,*,#157919,.T.); +#157919 = EDGE_CURVE('',#157911,#157920,#157922,.T.); +#157920 = VERTEX_POINT('',#157921); +#157921 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#157922 = LINE('',#157923,#157924); +#157923 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#157924 = VECTOR('',#157925,1.); +#157925 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#157926 = ORIENTED_EDGE('',*,*,#157927,.T.); +#157927 = EDGE_CURVE('',#157920,#157928,#157930,.T.); +#157928 = VERTEX_POINT('',#157929); +#157929 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#157930 = LINE('',#157931,#157932); +#157931 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#157932 = VECTOR('',#157933,1.); +#157933 = DIRECTION('',(0.,0.,1.)); +#157934 = ORIENTED_EDGE('',*,*,#157935,.T.); +#157935 = EDGE_CURVE('',#157928,#157936,#157938,.T.); +#157936 = VERTEX_POINT('',#157937); +#157937 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#157938 = LINE('',#157939,#157940); +#157939 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#157940 = VECTOR('',#157941,1.); +#157941 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#157942 = ORIENTED_EDGE('',*,*,#157943,.T.); +#157943 = EDGE_CURVE('',#157936,#157944,#157946,.T.); +#157944 = VERTEX_POINT('',#157945); +#157945 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#157946 = CIRCLE('',#157947,0.1); +#157947 = AXIS2_PLACEMENT_3D('',#157948,#157949,#157950); +#157948 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#157949 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#157950 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#157951 = ORIENTED_EDGE('',*,*,#157952,.T.); +#157952 = EDGE_CURVE('',#157944,#157953,#157955,.T.); +#157953 = VERTEX_POINT('',#157954); +#157954 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#157955 = LINE('',#157956,#157957); +#157956 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#157957 = VECTOR('',#157958,1.); +#157958 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#157959 = ORIENTED_EDGE('',*,*,#157960,.T.); +#157960 = EDGE_CURVE('',#157953,#156912,#157961,.T.); +#157961 = CIRCLE('',#157962,0.25); +#157962 = AXIS2_PLACEMENT_3D('',#157963,#157964,#157965); +#157963 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#157964 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#157965 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#157966 = PLANE('',#157967); +#157967 = AXIS2_PLACEMENT_3D('',#157968,#157969,#157970); +#157968 = CARTESIAN_POINT('',(0.931323080229,0.2,0.33452717391)); +#157969 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157970 = DIRECTION('',(0.,0.,1.)); +#157971 = ADVANCED_FACE('',(#157972),#157990,.F.); +#157972 = FACE_BOUND('',#157973,.F.); +#157973 = EDGE_LOOP('',(#157974,#157975,#157983,#157989)); +#157974 = ORIENTED_EDGE('',*,*,#157176,.T.); +#157975 = ORIENTED_EDGE('',*,*,#157976,.T.); +#157976 = EDGE_CURVE('',#157168,#157977,#157979,.T.); +#157977 = VERTEX_POINT('',#157978); +#157978 = CARTESIAN_POINT('',(0.843471632406,-0.2,0.206587955583)); +#157979 = LINE('',#157980,#157981); +#157980 = CARTESIAN_POINT('',(0.798480775301,-0.2,0.492364817767)); +#157981 = VECTOR('',#157982,1.); +#157982 = DIRECTION('',(0.155518033909,1.726597019897E-17, + -0.987833053268)); +#157983 = ORIENTED_EDGE('',*,*,#157984,.F.); +#157984 = EDGE_CURVE('',#157903,#157977,#157985,.T.); +#157985 = LINE('',#157986,#157987); +#157986 = CARTESIAN_POINT('',(0.843471632406,0.2,0.206587955583)); +#157987 = VECTOR('',#157988,1.); +#157988 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#157989 = ORIENTED_EDGE('',*,*,#157902,.F.); +#157990 = PLANE('',#157991); +#157991 = AXIS2_PLACEMENT_3D('',#157992,#157993,#157994); +#157992 = CARTESIAN_POINT('',(0.798480775301,0.2,0.492364817767)); +#157993 = DIRECTION('',(0.987833053268,1.096715000224E-16,0.155518033909 + )); +#157994 = DIRECTION('',(0.155518033909,1.726597019897E-17, + -0.987833053268)); +#157995 = ADVANCED_FACE('',(#157996),#158058,.T.); +#157996 = FACE_BOUND('',#157997,.T.); +#157997 = EDGE_LOOP('',(#157998,#157999,#158000,#158001,#158010,#158018, + #158026,#158034,#158043,#158051)); +#157998 = ORIENTED_EDGE('',*,*,#157199,.F.); +#157999 = ORIENTED_EDGE('',*,*,#157167,.T.); +#158000 = ORIENTED_EDGE('',*,*,#157976,.T.); +#158001 = ORIENTED_EDGE('',*,*,#158002,.T.); +#158002 = EDGE_CURVE('',#157977,#158003,#158005,.T.); +#158003 = VERTEX_POINT('',#158004); +#158004 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#158005 = CIRCLE('',#158006,0.25); +#158006 = AXIS2_PLACEMENT_3D('',#158007,#158008,#158009); +#158007 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#158008 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#158009 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#158010 = ORIENTED_EDGE('',*,*,#158011,.T.); +#158011 = EDGE_CURVE('',#158003,#158012,#158014,.T.); +#158012 = VERTEX_POINT('',#158013); +#158013 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#158014 = LINE('',#158015,#158016); +#158015 = CARTESIAN_POINT('',(1.089673570659,-0.2,5.551115123126E-17)); +#158016 = VECTOR('',#158017,1.); +#158017 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#158018 = ORIENTED_EDGE('',*,*,#158019,.T.); +#158019 = EDGE_CURVE('',#158012,#158020,#158022,.T.); +#158020 = VERTEX_POINT('',#158021); +#158021 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#158022 = LINE('',#158023,#158024); +#158023 = CARTESIAN_POINT('',(1.25,-0.2,5.551115123126E-17)); +#158024 = VECTOR('',#158025,1.); +#158025 = DIRECTION('',(0.,0.,1.)); +#158026 = ORIENTED_EDGE('',*,*,#158027,.T.); +#158027 = EDGE_CURVE('',#158020,#158028,#158030,.T.); +#158028 = VERTEX_POINT('',#158029); +#158029 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.15)); +#158030 = LINE('',#158031,#158032); +#158031 = CARTESIAN_POINT('',(1.25,-0.2,0.15)); +#158032 = VECTOR('',#158033,1.); +#158033 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#158034 = ORIENTED_EDGE('',*,*,#158035,.T.); +#158035 = EDGE_CURVE('',#158028,#158036,#158038,.T.); +#158036 = VERTEX_POINT('',#158037); +#158037 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#158038 = CIRCLE('',#158039,0.1); +#158039 = AXIS2_PLACEMENT_3D('',#158040,#158041,#158042); +#158040 = CARTESIAN_POINT('',(1.089673570659,-0.2,0.25)); +#158041 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#158042 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#158043 = ORIENTED_EDGE('',*,*,#158044,.T.); +#158044 = EDGE_CURVE('',#158036,#158045,#158047,.T.); +#158045 = VERTEX_POINT('',#158046); +#158046 = CARTESIAN_POINT('',(0.946201938253,-0.2,0.518412044417)); +#158047 = LINE('',#158048,#158049); +#158048 = CARTESIAN_POINT('',(0.991192795358,-0.2,0.232635182233)); +#158049 = VECTOR('',#158050,1.); +#158050 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#158051 = ORIENTED_EDGE('',*,*,#158052,.T.); +#158052 = EDGE_CURVE('',#158045,#157200,#158053,.T.); +#158053 = CIRCLE('',#158054,0.25); +#158054 = AXIS2_PLACEMENT_3D('',#158055,#158056,#158057); +#158055 = CARTESIAN_POINT('',(0.7,-0.2,0.475)); +#158056 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#158057 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#158058 = PLANE('',#158059); +#158059 = AXIS2_PLACEMENT_3D('',#158060,#158061,#158062); +#158060 = CARTESIAN_POINT('',(0.931323080229,-0.2,0.33452717391)); +#158061 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158062 = DIRECTION('',(0.,0.,1.)); +#158063 = ADVANCED_FACE('',(#158064),#158075,.T.); +#158064 = FACE_BOUND('',#158065,.T.); +#158065 = EDGE_LOOP('',(#158066,#158067,#158068,#158069)); +#158066 = ORIENTED_EDGE('',*,*,#157793,.T.); +#158067 = ORIENTED_EDGE('',*,*,#157300,.T.); +#158068 = ORIENTED_EDGE('',*,*,#157885,.F.); +#158069 = ORIENTED_EDGE('',*,*,#158070,.F.); +#158070 = EDGE_CURVE('',#157786,#157878,#158071,.T.); +#158071 = LINE('',#158072,#158073); +#158072 = CARTESIAN_POINT('',(-0.946201938253,0.75,0.518412044417)); +#158073 = VECTOR('',#158074,1.); +#158074 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158075 = CYLINDRICAL_SURFACE('',#158076,0.25); +#158076 = AXIS2_PLACEMENT_3D('',#158077,#158078,#158079); +#158077 = CARTESIAN_POINT('',(-0.7,0.75,0.475)); +#158078 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158079 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#158080 = ADVANCED_FACE('',(#158081),#158092,.F.); +#158081 = FACE_BOUND('',#158082,.F.); +#158082 = EDGE_LOOP('',(#158083,#158084,#158090,#158091)); +#158083 = ORIENTED_EDGE('',*,*,#157511,.F.); +#158084 = ORIENTED_EDGE('',*,*,#158085,.T.); +#158085 = EDGE_CURVE('',#157014,#157069,#158086,.T.); +#158086 = LINE('',#158087,#158088); +#158087 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#158088 = VECTOR('',#158089,1.); +#158089 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158090 = ORIENTED_EDGE('',*,*,#157719,.T.); +#158091 = ORIENTED_EDGE('',*,*,#157331,.F.); +#158092 = PLANE('',#158093); +#158093 = AXIS2_PLACEMENT_3D('',#158094,#158095,#158096); +#158094 = CARTESIAN_POINT('',(-0.7,-1.15,0.725)); +#158095 = DIRECTION('',(0.,0.,-1.)); +#158096 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#158097 = ADVANCED_FACE('',(#158098,#158127),#158138,.T.); +#158098 = FACE_BOUND('',#158099,.T.); +#158099 = EDGE_LOOP('',(#158100,#158101,#158102,#158103,#158111,#158119, + #158125,#158126)); +#158100 = ORIENTED_EDGE('',*,*,#157406,.F.); +#158101 = ORIENTED_EDGE('',*,*,#157383,.F.); +#158102 = ORIENTED_EDGE('',*,*,#157354,.F.); +#158103 = ORIENTED_EDGE('',*,*,#158104,.F.); +#158104 = EDGE_CURVE('',#158105,#157355,#158107,.T.); +#158105 = VERTEX_POINT('',#158106); +#158106 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#158107 = LINE('',#158108,#158109); +#158108 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#158109 = VECTOR('',#158110,1.); +#158110 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#158111 = ORIENTED_EDGE('',*,*,#158112,.F.); +#158112 = EDGE_CURVE('',#158113,#158105,#158115,.T.); +#158113 = VERTEX_POINT('',#158114); +#158114 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#158115 = LINE('',#158116,#158117); +#158116 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#158117 = VECTOR('',#158118,1.); +#158118 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#158119 = ORIENTED_EDGE('',*,*,#158120,.F.); +#158120 = EDGE_CURVE('',#157462,#158113,#158121,.T.); +#158121 = LINE('',#158122,#158123); +#158122 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#158123 = VECTOR('',#158124,1.); +#158124 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#158125 = ORIENTED_EDGE('',*,*,#157468,.F.); +#158126 = ORIENTED_EDGE('',*,*,#157429,.F.); +#158127 = FACE_BOUND('',#158128,.T.); +#158128 = EDGE_LOOP('',(#158129)); +#158129 = ORIENTED_EDGE('',*,*,#158130,.T.); +#158130 = EDGE_CURVE('',#158131,#158131,#158133,.T.); +#158131 = VERTEX_POINT('',#158132); +#158132 = CARTESIAN_POINT('',(-0.428243103516,1.178243103516,1.2)); +#158133 = CIRCLE('',#158134,5.E-02); +#158134 = AXIS2_PLACEMENT_3D('',#158135,#158136,#158137); +#158135 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#158136 = DIRECTION('',(0.,-0.,-1.)); +#158137 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158138 = PLANE('',#158139); +#158139 = AXIS2_PLACEMENT_3D('',#158140,#158141,#158142); +#158140 = CARTESIAN_POINT('',(-0.559121551758,1.408243103516,1.2)); +#158141 = DIRECTION('',(0.,0.,1.)); +#158142 = DIRECTION('',(0.369013679242,-0.929423963825,0.)); +#158143 = ADVANCED_FACE('',(#158144),#158154,.F.); +#158144 = FACE_BOUND('',#158145,.F.); +#158145 = EDGE_LOOP('',(#158146,#158147,#158148,#158149)); +#158146 = ORIENTED_EDGE('',*,*,#157518,.T.); +#158147 = ORIENTED_EDGE('',*,*,#157362,.T.); +#158148 = ORIENTED_EDGE('',*,*,#158104,.F.); +#158149 = ORIENTED_EDGE('',*,*,#158150,.F.); +#158150 = EDGE_CURVE('',#157519,#158105,#158151,.T.); +#158151 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158152,#158153), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158152 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#158153 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#158154 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158155,#158156) + ,(#158157,#158158 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158155 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#158156 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#158157 = CARTESIAN_POINT('',(-0.675,-1.3925,0.725)); +#158158 = CARTESIAN_POINT('',(-0.608243103516,-1.359121551758,1.2)); +#158159 = ADVANCED_FACE('',(#158160),#158170,.F.); +#158160 = FACE_BOUND('',#158161,.F.); +#158161 = EDGE_LOOP('',(#158162,#158163,#158168,#158169)); +#158162 = ORIENTED_EDGE('',*,*,#157534,.T.); +#158163 = ORIENTED_EDGE('',*,*,#158164,.T.); +#158164 = EDGE_CURVE('',#157527,#158113,#158165,.T.); +#158165 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158166,#158167), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158166 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#158167 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#158168 = ORIENTED_EDGE('',*,*,#158120,.F.); +#158169 = ORIENTED_EDGE('',*,*,#157461,.F.); +#158170 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158171,#158172) + ,(#158173,#158174 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158171 = CARTESIAN_POINT('',(0.675,-1.3925,0.725)); +#158172 = CARTESIAN_POINT('',(0.608243103516,-1.359121551758,1.2)); +#158173 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#158174 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#158175 = ADVANCED_FACE('',(#158176),#158187,.T.); +#158176 = FACE_BOUND('',#158177,.T.); +#158177 = EDGE_LOOP('',(#158178,#158179,#158180,#158181)); +#158178 = ORIENTED_EDGE('',*,*,#157960,.T.); +#158179 = ORIENTED_EDGE('',*,*,#157484,.T.); +#158180 = ORIENTED_EDGE('',*,*,#158052,.F.); +#158181 = ORIENTED_EDGE('',*,*,#158182,.F.); +#158182 = EDGE_CURVE('',#157953,#158045,#158183,.T.); +#158183 = LINE('',#158184,#158185); +#158184 = CARTESIAN_POINT('',(0.946201938253,0.2,0.518412044417)); +#158185 = VECTOR('',#158186,1.); +#158186 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158187 = CYLINDRICAL_SURFACE('',#158188,0.25); +#158188 = AXIS2_PLACEMENT_3D('',#158189,#158190,#158191); +#158189 = CARTESIAN_POINT('',(0.7,0.2,0.475)); +#158190 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#158191 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#158192 = ADVANCED_FACE('',(#158193),#158199,.F.); +#158193 = FACE_BOUND('',#158194,.F.); +#158194 = EDGE_LOOP('',(#158195,#158196,#158197,#158198)); +#158195 = ORIENTED_EDGE('',*,*,#157526,.T.); +#158196 = ORIENTED_EDGE('',*,*,#158150,.T.); +#158197 = ORIENTED_EDGE('',*,*,#158112,.F.); +#158198 = ORIENTED_EDGE('',*,*,#158164,.F.); +#158199 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158200,#158201) + ,(#158202,#158203 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.185),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#158200 = CARTESIAN_POINT('',(0.5925,-1.475,0.725)); +#158201 = CARTESIAN_POINT('',(0.559121551758,-1.408243103516,1.2)); +#158202 = CARTESIAN_POINT('',(-0.5925,-1.475,0.725)); +#158203 = CARTESIAN_POINT('',(-0.559121551758,-1.408243103516,1.2)); +#158204 = ADVANCED_FACE('',(#158205),#158216,.T.); +#158205 = FACE_BOUND('',#158206,.T.); +#158206 = EDGE_LOOP('',(#158207,#158208,#158209,#158210)); +#158207 = ORIENTED_EDGE('',*,*,#157609,.T.); +#158208 = ORIENTED_EDGE('',*,*,#158085,.T.); +#158209 = ORIENTED_EDGE('',*,*,#157701,.F.); +#158210 = ORIENTED_EDGE('',*,*,#158211,.F.); +#158211 = EDGE_CURVE('',#157602,#157694,#158212,.T.); +#158212 = LINE('',#158213,#158214); +#158213 = CARTESIAN_POINT('',(-0.946201938253,-1.15,0.518412044417)); +#158214 = VECTOR('',#158215,1.); +#158215 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158216 = CYLINDRICAL_SURFACE('',#158217,0.25); +#158217 = AXIS2_PLACEMENT_3D('',#158218,#158219,#158220); +#158218 = CARTESIAN_POINT('',(-0.7,-1.15,0.475)); +#158219 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158220 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#158221 = ADVANCED_FACE('',(#158222),#158233,.F.); +#158222 = FACE_BOUND('',#158223,.F.); +#158223 = EDGE_LOOP('',(#158224,#158230,#158231,#158232)); +#158224 = ORIENTED_EDGE('',*,*,#158225,.T.); +#158225 = EDGE_CURVE('',#157593,#157685,#158226,.T.); +#158226 = LINE('',#158227,#158228); +#158227 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#158228 = VECTOR('',#158229,1.); +#158229 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158230 = ORIENTED_EDGE('',*,*,#157693,.T.); +#158231 = ORIENTED_EDGE('',*,*,#158211,.F.); +#158232 = ORIENTED_EDGE('',*,*,#157601,.F.); +#158233 = PLANE('',#158234); +#158234 = AXIS2_PLACEMENT_3D('',#158235,#158236,#158237); +#158235 = CARTESIAN_POINT('',(-0.991192795358,-1.15,0.232635182233)); +#158236 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#158237 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#158238 = ADVANCED_FACE('',(#158239),#158250,.F.); +#158239 = FACE_BOUND('',#158240,.F.); +#158240 = EDGE_LOOP('',(#158241,#158247,#158248,#158249)); +#158241 = ORIENTED_EDGE('',*,*,#158242,.T.); +#158242 = EDGE_CURVE('',#157585,#157677,#158243,.T.); +#158243 = LINE('',#158244,#158245); +#158244 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.15)); +#158245 = VECTOR('',#158246,1.); +#158246 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158247 = ORIENTED_EDGE('',*,*,#157684,.T.); +#158248 = ORIENTED_EDGE('',*,*,#158225,.F.); +#158249 = ORIENTED_EDGE('',*,*,#157592,.F.); +#158250 = CYLINDRICAL_SURFACE('',#158251,0.1); +#158251 = AXIS2_PLACEMENT_3D('',#158252,#158253,#158254); +#158252 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#158253 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158254 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#158255 = ADVANCED_FACE('',(#158256),#158267,.F.); +#158256 = FACE_BOUND('',#158257,.F.); +#158257 = EDGE_LOOP('',(#158258,#158264,#158265,#158266)); +#158258 = ORIENTED_EDGE('',*,*,#158259,.T.); +#158259 = EDGE_CURVE('',#157577,#157669,#158260,.T.); +#158260 = LINE('',#158261,#158262); +#158261 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#158262 = VECTOR('',#158263,1.); +#158263 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158264 = ORIENTED_EDGE('',*,*,#157676,.T.); +#158265 = ORIENTED_EDGE('',*,*,#158242,.F.); +#158266 = ORIENTED_EDGE('',*,*,#157584,.F.); +#158267 = PLANE('',#158268); +#158268 = AXIS2_PLACEMENT_3D('',#158269,#158270,#158271); +#158269 = CARTESIAN_POINT('',(-1.25,-1.15,0.15)); +#158270 = DIRECTION('',(0.,0.,-1.)); +#158271 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#158272 = ADVANCED_FACE('',(#158273),#158284,.F.); +#158273 = FACE_BOUND('',#158274,.F.); +#158274 = EDGE_LOOP('',(#158275,#158281,#158282,#158283)); +#158275 = ORIENTED_EDGE('',*,*,#158276,.T.); +#158276 = EDGE_CURVE('',#157569,#157661,#158277,.T.); +#158277 = LINE('',#158278,#158279); +#158278 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#158279 = VECTOR('',#158280,1.); +#158280 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158281 = ORIENTED_EDGE('',*,*,#157668,.T.); +#158282 = ORIENTED_EDGE('',*,*,#158259,.F.); +#158283 = ORIENTED_EDGE('',*,*,#157576,.F.); +#158284 = PLANE('',#158285); +#158285 = AXIS2_PLACEMENT_3D('',#158286,#158287,#158288); +#158286 = CARTESIAN_POINT('',(-1.25,-1.15,5.551115123126E-17)); +#158287 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#158288 = DIRECTION('',(0.,0.,1.)); +#158289 = ADVANCED_FACE('',(#158290),#158301,.F.); +#158290 = FACE_BOUND('',#158291,.F.); +#158291 = EDGE_LOOP('',(#158292,#158298,#158299,#158300)); +#158292 = ORIENTED_EDGE('',*,*,#158293,.T.); +#158293 = EDGE_CURVE('',#157560,#157652,#158294,.T.); +#158294 = LINE('',#158295,#158296); +#158295 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17) + ); +#158296 = VECTOR('',#158297,1.); +#158297 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158298 = ORIENTED_EDGE('',*,*,#157660,.T.); +#158299 = ORIENTED_EDGE('',*,*,#158276,.F.); +#158300 = ORIENTED_EDGE('',*,*,#157568,.F.); +#158301 = PLANE('',#158302); +#158302 = AXIS2_PLACEMENT_3D('',#158303,#158304,#158305); +#158303 = CARTESIAN_POINT('',(-1.089673570659,-1.15,5.551115123126E-17) + ); +#158304 = DIRECTION('',(0.,0.,1.)); +#158305 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#158306 = ADVANCED_FACE('',(#158307),#158313,.T.); +#158307 = FACE_BOUND('',#158308,.T.); +#158308 = EDGE_LOOP('',(#158309,#158310,#158311,#158312)); +#158309 = ORIENTED_EDGE('',*,*,#157559,.T.); +#158310 = ORIENTED_EDGE('',*,*,#158293,.T.); +#158311 = ORIENTED_EDGE('',*,*,#157651,.F.); +#158312 = ORIENTED_EDGE('',*,*,#157633,.F.); +#158313 = CYLINDRICAL_SURFACE('',#158314,0.25); +#158314 = AXIS2_PLACEMENT_3D('',#158315,#158316,#158317); +#158315 = CARTESIAN_POINT('',(-1.089673570659,-1.15,0.25)); +#158316 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158317 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#158318 = ADVANCED_FACE('',(#158319),#158330,.F.); +#158319 = FACE_BOUND('',#158320,.F.); +#158320 = EDGE_LOOP('',(#158321,#158327,#158328,#158329)); +#158321 = ORIENTED_EDGE('',*,*,#158322,.T.); +#158322 = EDGE_CURVE('',#157777,#157869,#158323,.T.); +#158323 = LINE('',#158324,#158325); +#158324 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#158325 = VECTOR('',#158326,1.); +#158326 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158327 = ORIENTED_EDGE('',*,*,#157877,.T.); +#158328 = ORIENTED_EDGE('',*,*,#158070,.F.); +#158329 = ORIENTED_EDGE('',*,*,#157785,.F.); +#158330 = PLANE('',#158331); +#158331 = AXIS2_PLACEMENT_3D('',#158332,#158333,#158334); +#158332 = CARTESIAN_POINT('',(-0.991192795358,0.75,0.232635182233)); +#158333 = DIRECTION('',(0.987833053268,-1.130315865527E-17, + -0.155518033909)); +#158334 = DIRECTION('',(0.155518033909,-1.779496044609E-18, + 0.987833053268)); +#158335 = ADVANCED_FACE('',(#158336),#158347,.F.); +#158336 = FACE_BOUND('',#158337,.F.); +#158337 = EDGE_LOOP('',(#158338,#158344,#158345,#158346)); +#158338 = ORIENTED_EDGE('',*,*,#158339,.T.); +#158339 = EDGE_CURVE('',#157769,#157861,#158340,.T.); +#158340 = LINE('',#158341,#158342); +#158341 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.15)); +#158342 = VECTOR('',#158343,1.); +#158343 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158344 = ORIENTED_EDGE('',*,*,#157868,.T.); +#158345 = ORIENTED_EDGE('',*,*,#158322,.F.); +#158346 = ORIENTED_EDGE('',*,*,#157776,.F.); +#158347 = CYLINDRICAL_SURFACE('',#158348,0.1); +#158348 = AXIS2_PLACEMENT_3D('',#158349,#158350,#158351); +#158349 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#158350 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158351 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#158352 = ADVANCED_FACE('',(#158353),#158364,.F.); +#158353 = FACE_BOUND('',#158354,.F.); +#158354 = EDGE_LOOP('',(#158355,#158361,#158362,#158363)); +#158355 = ORIENTED_EDGE('',*,*,#158356,.T.); +#158356 = EDGE_CURVE('',#157761,#157853,#158357,.T.); +#158357 = LINE('',#158358,#158359); +#158358 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#158359 = VECTOR('',#158360,1.); +#158360 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158361 = ORIENTED_EDGE('',*,*,#157860,.T.); +#158362 = ORIENTED_EDGE('',*,*,#158339,.F.); +#158363 = ORIENTED_EDGE('',*,*,#157768,.F.); +#158364 = PLANE('',#158365); +#158365 = AXIS2_PLACEMENT_3D('',#158366,#158367,#158368); +#158366 = CARTESIAN_POINT('',(-1.25,0.75,0.15)); +#158367 = DIRECTION('',(0.,0.,-1.)); +#158368 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#158369 = ADVANCED_FACE('',(#158370),#158381,.F.); +#158370 = FACE_BOUND('',#158371,.F.); +#158371 = EDGE_LOOP('',(#158372,#158378,#158379,#158380)); +#158372 = ORIENTED_EDGE('',*,*,#158373,.T.); +#158373 = EDGE_CURVE('',#157753,#157845,#158374,.T.); +#158374 = LINE('',#158375,#158376); +#158375 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#158376 = VECTOR('',#158377,1.); +#158377 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158378 = ORIENTED_EDGE('',*,*,#157852,.T.); +#158379 = ORIENTED_EDGE('',*,*,#158356,.F.); +#158380 = ORIENTED_EDGE('',*,*,#157760,.F.); +#158381 = PLANE('',#158382); +#158382 = AXIS2_PLACEMENT_3D('',#158383,#158384,#158385); +#158383 = CARTESIAN_POINT('',(-1.25,0.75,5.551115123126E-17)); +#158384 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#158385 = DIRECTION('',(0.,0.,1.)); +#158386 = ADVANCED_FACE('',(#158387),#158398,.F.); +#158387 = FACE_BOUND('',#158388,.F.); +#158388 = EDGE_LOOP('',(#158389,#158395,#158396,#158397)); +#158389 = ORIENTED_EDGE('',*,*,#158390,.T.); +#158390 = EDGE_CURVE('',#157744,#157836,#158391,.T.); +#158391 = LINE('',#158392,#158393); +#158392 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#158393 = VECTOR('',#158394,1.); +#158394 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#158395 = ORIENTED_EDGE('',*,*,#157844,.T.); +#158396 = ORIENTED_EDGE('',*,*,#158373,.F.); +#158397 = ORIENTED_EDGE('',*,*,#157752,.F.); +#158398 = PLANE('',#158399); +#158399 = AXIS2_PLACEMENT_3D('',#158400,#158401,#158402); +#158400 = CARTESIAN_POINT('',(-1.089673570659,0.75,5.551115123126E-17)); +#158401 = DIRECTION('',(0.,0.,1.)); +#158402 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#158403 = ADVANCED_FACE('',(#158404),#158410,.T.); +#158404 = FACE_BOUND('',#158405,.T.); +#158405 = EDGE_LOOP('',(#158406,#158407,#158408,#158409)); +#158406 = ORIENTED_EDGE('',*,*,#157743,.T.); +#158407 = ORIENTED_EDGE('',*,*,#158390,.T.); +#158408 = ORIENTED_EDGE('',*,*,#157835,.F.); +#158409 = ORIENTED_EDGE('',*,*,#157817,.F.); +#158410 = CYLINDRICAL_SURFACE('',#158411,0.25); +#158411 = AXIS2_PLACEMENT_3D('',#158412,#158413,#158414); +#158412 = CARTESIAN_POINT('',(-1.089673570659,0.75,0.25)); +#158413 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#158414 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#158415 = ADVANCED_FACE('',(#158416),#158427,.F.); +#158416 = FACE_BOUND('',#158417,.F.); +#158417 = EDGE_LOOP('',(#158418,#158424,#158425,#158426)); +#158418 = ORIENTED_EDGE('',*,*,#158419,.T.); +#158419 = EDGE_CURVE('',#157944,#158036,#158420,.T.); +#158420 = LINE('',#158421,#158422); +#158421 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#158422 = VECTOR('',#158423,1.); +#158423 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158424 = ORIENTED_EDGE('',*,*,#158044,.T.); +#158425 = ORIENTED_EDGE('',*,*,#158182,.F.); +#158426 = ORIENTED_EDGE('',*,*,#157952,.F.); +#158427 = PLANE('',#158428); +#158428 = AXIS2_PLACEMENT_3D('',#158429,#158430,#158431); +#158429 = CARTESIAN_POINT('',(0.991192795358,0.2,0.232635182233)); +#158430 = DIRECTION('',(-0.987833053268,-1.096715000224E-16, + -0.155518033909)); +#158431 = DIRECTION('',(-0.155518033909,-1.726597019897E-17, + 0.987833053268)); +#158432 = ADVANCED_FACE('',(#158433),#158444,.F.); +#158433 = FACE_BOUND('',#158434,.F.); +#158434 = EDGE_LOOP('',(#158435,#158441,#158442,#158443)); +#158435 = ORIENTED_EDGE('',*,*,#158436,.T.); +#158436 = EDGE_CURVE('',#157936,#158028,#158437,.T.); +#158437 = LINE('',#158438,#158439); +#158438 = CARTESIAN_POINT('',(1.089673570659,0.2,0.15)); +#158439 = VECTOR('',#158440,1.); +#158440 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158441 = ORIENTED_EDGE('',*,*,#158035,.T.); +#158442 = ORIENTED_EDGE('',*,*,#158419,.F.); +#158443 = ORIENTED_EDGE('',*,*,#157943,.F.); +#158444 = CYLINDRICAL_SURFACE('',#158445,0.1); +#158445 = AXIS2_PLACEMENT_3D('',#158446,#158447,#158448); +#158446 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#158447 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#158448 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#158449 = ADVANCED_FACE('',(#158450),#158461,.F.); +#158450 = FACE_BOUND('',#158451,.F.); +#158451 = EDGE_LOOP('',(#158452,#158458,#158459,#158460)); +#158452 = ORIENTED_EDGE('',*,*,#158453,.T.); +#158453 = EDGE_CURVE('',#157928,#158020,#158454,.T.); +#158454 = LINE('',#158455,#158456); +#158455 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#158456 = VECTOR('',#158457,1.); +#158457 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158458 = ORIENTED_EDGE('',*,*,#158027,.T.); +#158459 = ORIENTED_EDGE('',*,*,#158436,.F.); +#158460 = ORIENTED_EDGE('',*,*,#157935,.F.); +#158461 = PLANE('',#158462); +#158462 = AXIS2_PLACEMENT_3D('',#158463,#158464,#158465); +#158463 = CARTESIAN_POINT('',(1.25,0.2,0.15)); +#158464 = DIRECTION('',(0.,0.,-1.)); +#158465 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#158466 = ADVANCED_FACE('',(#158467),#158478,.F.); +#158467 = FACE_BOUND('',#158468,.F.); +#158468 = EDGE_LOOP('',(#158469,#158475,#158476,#158477)); +#158469 = ORIENTED_EDGE('',*,*,#158470,.T.); +#158470 = EDGE_CURVE('',#157920,#158012,#158471,.T.); +#158471 = LINE('',#158472,#158473); +#158472 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#158473 = VECTOR('',#158474,1.); +#158474 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158475 = ORIENTED_EDGE('',*,*,#158019,.T.); +#158476 = ORIENTED_EDGE('',*,*,#158453,.F.); +#158477 = ORIENTED_EDGE('',*,*,#157927,.F.); +#158478 = PLANE('',#158479); +#158479 = AXIS2_PLACEMENT_3D('',#158480,#158481,#158482); +#158480 = CARTESIAN_POINT('',(1.25,0.2,5.551115123126E-17)); +#158481 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#158482 = DIRECTION('',(0.,0.,1.)); +#158483 = ADVANCED_FACE('',(#158484),#158495,.F.); +#158484 = FACE_BOUND('',#158485,.F.); +#158485 = EDGE_LOOP('',(#158486,#158492,#158493,#158494)); +#158486 = ORIENTED_EDGE('',*,*,#158487,.T.); +#158487 = EDGE_CURVE('',#157911,#158003,#158488,.T.); +#158488 = LINE('',#158489,#158490); +#158489 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#158490 = VECTOR('',#158491,1.); +#158491 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158492 = ORIENTED_EDGE('',*,*,#158011,.T.); +#158493 = ORIENTED_EDGE('',*,*,#158470,.F.); +#158494 = ORIENTED_EDGE('',*,*,#157919,.F.); +#158495 = PLANE('',#158496); +#158496 = AXIS2_PLACEMENT_3D('',#158497,#158498,#158499); +#158497 = CARTESIAN_POINT('',(1.089673570659,0.2,5.551115123126E-17)); +#158498 = DIRECTION('',(0.,0.,1.)); +#158499 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#158500 = ADVANCED_FACE('',(#158501),#158507,.T.); +#158501 = FACE_BOUND('',#158502,.T.); +#158502 = EDGE_LOOP('',(#158503,#158504,#158505,#158506)); +#158503 = ORIENTED_EDGE('',*,*,#157910,.T.); +#158504 = ORIENTED_EDGE('',*,*,#158487,.T.); +#158505 = ORIENTED_EDGE('',*,*,#158002,.F.); +#158506 = ORIENTED_EDGE('',*,*,#157984,.F.); +#158507 = CYLINDRICAL_SURFACE('',#158508,0.25); +#158508 = AXIS2_PLACEMENT_3D('',#158509,#158510,#158511); +#158509 = CARTESIAN_POINT('',(1.089673570659,0.2,0.25)); +#158510 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#158511 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#158512 = ADVANCED_FACE('',(#158513),#158516,.F.); +#158513 = FACE_BOUND('',#158514,.T.); +#158514 = EDGE_LOOP('',(#158515)); +#158515 = ORIENTED_EDGE('',*,*,#158130,.F.); +#158516 = PLANE('',#158517); +#158517 = AXIS2_PLACEMENT_3D('',#158518,#158519,#158520); +#158518 = CARTESIAN_POINT('',(-0.428243103516,1.228243103516,1.2)); +#158519 = DIRECTION('',(0.,0.,-1.)); +#158520 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#158521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#158525)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#158522,#158523,#158524)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#158522 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#158523 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#158524 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#158525 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#158522, + 'distance_accuracy_value','confusion accuracy'); +#158526 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#158527,#158529); +#158527 = ( REPRESENTATION_RELATIONSHIP('','',#156538,#156515) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#158528) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#158528 = ITEM_DEFINED_TRANSFORMATION('','',#11,#156516); +#158529 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #158530); +#158530 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('67','=>[0:1:1:34]','',#156510, + #156533,$); +#158531 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#156535)); +#158532 = SHAPE_DEFINITION_REPRESENTATION(#158533,#158539); +#158533 = PRODUCT_DEFINITION_SHAPE('','',#158534); +#158534 = PRODUCT_DEFINITION('design','',#158535,#158538); +#158535 = PRODUCT_DEFINITION_FORMATION('','',#158536); +#158536 = PRODUCT('D_SOD-323','D_SOD-323','',(#158537)); +#158537 = PRODUCT_CONTEXT('',#2,'mechanical'); +#158538 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#158539 = SHAPE_REPRESENTATION('',(#11,#158540),#158544); +#158540 = AXIS2_PLACEMENT_3D('',#158541,#158542,#158543); +#158541 = CARTESIAN_POINT('',(0.,0.,0.)); +#158542 = DIRECTION('',(0.,0.,1.)); +#158543 = DIRECTION('',(1.,0.,-0.)); +#158544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#158548)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#158545,#158546,#158547)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#158545 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#158546 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#158547 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#158548 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#158545, + 'distance_accuracy_value','confusion accuracy'); +#158549 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#158550,#158552); +#158550 = ( REPRESENTATION_RELATIONSHIP('','',#158539,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#158551) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#158551 = ITEM_DEFINED_TRANSFORMATION('','',#11,#215); +#158552 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #158553); +#158553 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('70','D_VBUS_TVS1','',#5, + #158534,$); +#158554 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#158536)); +#158555 = SHAPE_DEFINITION_REPRESENTATION(#158556,#158562); +#158556 = PRODUCT_DEFINITION_SHAPE('','',#158557); +#158557 = PRODUCT_DEFINITION('design','',#158558,#158561); +#158558 = PRODUCT_DEFINITION_FORMATION('','',#158559); +#158559 = PRODUCT('D_SOD-323','D_SOD-323','',(#158560)); +#158560 = PRODUCT_CONTEXT('',#2,'mechanical'); +#158561 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#158562 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#158563),#160251); +#158563 = MANIFOLD_SOLID_BREP('',#158564); +#158564 = CLOSED_SHELL('',(#158565,#158619,#158682,#158705,#158735, + #158768,#158798,#158821,#158844,#158867,#158890,#158913,#158946, + #158969,#158992,#159080,#159155,#159179,#159247,#159335,#159351, + #159367,#159383,#159399,#159416,#159449,#159466,#159488,#159519, + #159542,#159565,#159588,#159618,#159635,#159652,#159669,#159686, + #159703,#159720,#159737,#159749,#159772,#159795,#159812,#159887, + #159911,#159979,#159996,#160046,#160063,#160080,#160097,#160114, + #160131,#160143,#160174,#160198,#160222,#160239)); +#158565 = ADVANCED_FACE('',(#158566),#158614,.F.); +#158566 = FACE_BOUND('',#158567,.F.); +#158567 = EDGE_LOOP('',(#158568,#158578,#158585,#158593,#158601,#158609) + ); +#158568 = ORIENTED_EDGE('',*,*,#158569,.T.); +#158569 = EDGE_CURVE('',#158570,#158572,#158574,.T.); +#158570 = VERTEX_POINT('',#158571); +#158571 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158572 = VERTEX_POINT('',#158573); +#158573 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#158574 = LINE('',#158575,#158576); +#158575 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158576 = VECTOR('',#158577,1.); +#158577 = DIRECTION('',(0.,1.,0.)); +#158578 = ORIENTED_EDGE('',*,*,#158579,.T.); +#158579 = EDGE_CURVE('',#158572,#158580,#158582,.T.); +#158580 = VERTEX_POINT('',#158581); +#158581 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158582 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158583,#158584), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158583 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#158584 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158585 = ORIENTED_EDGE('',*,*,#158586,.F.); +#158586 = EDGE_CURVE('',#158587,#158580,#158589,.T.); +#158587 = VERTEX_POINT('',#158588); +#158588 = CARTESIAN_POINT('',(-0.85,0.175,0.525)); +#158589 = LINE('',#158590,#158591); +#158590 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158591 = VECTOR('',#158592,1.); +#158592 = DIRECTION('',(0.,1.,0.)); +#158593 = ORIENTED_EDGE('',*,*,#158594,.F.); +#158594 = EDGE_CURVE('',#158595,#158587,#158597,.T.); +#158595 = VERTEX_POINT('',#158596); +#158596 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#158597 = LINE('',#158598,#158599); +#158598 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#158599 = VECTOR('',#158600,1.); +#158600 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#158601 = ORIENTED_EDGE('',*,*,#158602,.F.); +#158602 = EDGE_CURVE('',#158603,#158595,#158605,.T.); +#158603 = VERTEX_POINT('',#158604); +#158604 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158605 = LINE('',#158606,#158607); +#158606 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158607 = VECTOR('',#158608,1.); +#158608 = DIRECTION('',(0.,1.,0.)); +#158609 = ORIENTED_EDGE('',*,*,#158610,.F.); +#158610 = EDGE_CURVE('',#158570,#158603,#158611,.T.); +#158611 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158612,#158613), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158612 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158613 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158614 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158615,#158616) + ,(#158617,#158618 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#158615 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158616 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158617 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#158618 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158619 = ADVANCED_FACE('',(#158620),#158677,.F.); +#158620 = FACE_BOUND('',#158621,.T.); +#158621 = EDGE_LOOP('',(#158622,#158623,#158631,#158639,#158647,#158655, + #158663,#158671)); +#158622 = ORIENTED_EDGE('',*,*,#158569,.T.); +#158623 = ORIENTED_EDGE('',*,*,#158624,.T.); +#158624 = EDGE_CURVE('',#158572,#158625,#158627,.T.); +#158625 = VERTEX_POINT('',#158626); +#158626 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#158627 = LINE('',#158628,#158629); +#158628 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#158629 = VECTOR('',#158630,1.); +#158630 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158631 = ORIENTED_EDGE('',*,*,#158632,.T.); +#158632 = EDGE_CURVE('',#158625,#158633,#158635,.T.); +#158633 = VERTEX_POINT('',#158634); +#158634 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#158635 = LINE('',#158636,#158637); +#158636 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#158637 = VECTOR('',#158638,1.); +#158638 = DIRECTION('',(1.,0.,0.)); +#158639 = ORIENTED_EDGE('',*,*,#158640,.T.); +#158640 = EDGE_CURVE('',#158633,#158641,#158643,.T.); +#158641 = VERTEX_POINT('',#158642); +#158642 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#158643 = LINE('',#158644,#158645); +#158644 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#158645 = VECTOR('',#158646,1.); +#158646 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#158647 = ORIENTED_EDGE('',*,*,#158648,.T.); +#158648 = EDGE_CURVE('',#158641,#158649,#158651,.T.); +#158649 = VERTEX_POINT('',#158650); +#158650 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#158651 = LINE('',#158652,#158653); +#158652 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#158653 = VECTOR('',#158654,1.); +#158654 = DIRECTION('',(0.,-1.,0.)); +#158655 = ORIENTED_EDGE('',*,*,#158656,.T.); +#158656 = EDGE_CURVE('',#158649,#158657,#158659,.T.); +#158657 = VERTEX_POINT('',#158658); +#158658 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#158659 = LINE('',#158660,#158661); +#158660 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#158661 = VECTOR('',#158662,1.); +#158662 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#158663 = ORIENTED_EDGE('',*,*,#158664,.T.); +#158664 = EDGE_CURVE('',#158657,#158665,#158667,.T.); +#158665 = VERTEX_POINT('',#158666); +#158666 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#158667 = LINE('',#158668,#158669); +#158668 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#158669 = VECTOR('',#158670,1.); +#158670 = DIRECTION('',(-1.,0.,0.)); +#158671 = ORIENTED_EDGE('',*,*,#158672,.T.); +#158672 = EDGE_CURVE('',#158665,#158570,#158673,.T.); +#158673 = LINE('',#158674,#158675); +#158674 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#158675 = VECTOR('',#158676,1.); +#158676 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#158677 = PLANE('',#158678); +#158678 = AXIS2_PLACEMENT_3D('',#158679,#158680,#158681); +#158679 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158680 = DIRECTION('',(0.,0.,1.)); +#158681 = DIRECTION('',(0.844997546083,0.534770181587,-0.)); +#158682 = ADVANCED_FACE('',(#158683),#158700,.F.); +#158683 = FACE_BOUND('',#158684,.F.); +#158684 = EDGE_LOOP('',(#158685,#158686,#158693,#158699)); +#158685 = ORIENTED_EDGE('',*,*,#158624,.T.); +#158686 = ORIENTED_EDGE('',*,*,#158687,.T.); +#158687 = EDGE_CURVE('',#158625,#158688,#158690,.T.); +#158688 = VERTEX_POINT('',#158689); +#158689 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158690 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158691,#158692), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158691 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#158692 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158693 = ORIENTED_EDGE('',*,*,#158694,.F.); +#158694 = EDGE_CURVE('',#158580,#158688,#158695,.T.); +#158695 = LINE('',#158696,#158697); +#158696 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158697 = VECTOR('',#158698,1.); +#158698 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158699 = ORIENTED_EDGE('',*,*,#158579,.F.); +#158700 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158701,#158702) + ,(#158703,#158704 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158701 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#158702 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158703 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#158704 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158705 = ADVANCED_FACE('',(#158706),#158730,.F.); +#158706 = FACE_BOUND('',#158707,.F.); +#158707 = EDGE_LOOP('',(#158708,#158715,#158716,#158724)); +#158708 = ORIENTED_EDGE('',*,*,#158709,.F.); +#158709 = EDGE_CURVE('',#158603,#158710,#158712,.T.); +#158710 = VERTEX_POINT('',#158711); +#158711 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158712 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158713,#158714), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158713 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158714 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158715 = ORIENTED_EDGE('',*,*,#158602,.T.); +#158716 = ORIENTED_EDGE('',*,*,#158717,.T.); +#158717 = EDGE_CURVE('',#158595,#158718,#158720,.T.); +#158718 = VERTEX_POINT('',#158719); +#158719 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#158720 = LINE('',#158721,#158722); +#158721 = CARTESIAN_POINT('',(-0.85,-0.175,0.503709028349)); +#158722 = VECTOR('',#158723,1.); +#158723 = DIRECTION('',(0.,0.,1.)); +#158724 = ORIENTED_EDGE('',*,*,#158725,.F.); +#158725 = EDGE_CURVE('',#158710,#158718,#158726,.T.); +#158726 = LINE('',#158727,#158728); +#158727 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158728 = VECTOR('',#158729,1.); +#158729 = DIRECTION('',(0.,1.,0.)); +#158730 = PLANE('',#158731); +#158731 = AXIS2_PLACEMENT_3D('',#158732,#158733,#158734); +#158732 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158733 = DIRECTION('',(1.,0.,0.)); +#158734 = DIRECTION('',(-0.,1.,0.)); +#158735 = ADVANCED_FACE('',(#158736),#158763,.F.); +#158736 = FACE_BOUND('',#158737,.F.); +#158737 = EDGE_LOOP('',(#158738,#158739,#158748,#158756)); +#158738 = ORIENTED_EDGE('',*,*,#158594,.T.); +#158739 = ORIENTED_EDGE('',*,*,#158740,.T.); +#158740 = EDGE_CURVE('',#158587,#158741,#158743,.T.); +#158741 = VERTEX_POINT('',#158742); +#158742 = CARTESIAN_POINT('',(-0.918936542711,0.175,0.467155372437)); +#158743 = CIRCLE('',#158744,7.E-02); +#158744 = AXIS2_PLACEMENT_3D('',#158745,#158746,#158747); +#158745 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#158746 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#158747 = DIRECTION('',(0.,0.,1.)); +#158748 = ORIENTED_EDGE('',*,*,#158749,.F.); +#158749 = EDGE_CURVE('',#158750,#158741,#158752,.T.); +#158750 = VERTEX_POINT('',#158751); +#158751 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#158752 = LINE('',#158753,#158754); +#158753 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#158754 = VECTOR('',#158755,1.); +#158755 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#158756 = ORIENTED_EDGE('',*,*,#158757,.F.); +#158757 = EDGE_CURVE('',#158595,#158750,#158758,.T.); +#158758 = CIRCLE('',#158759,7.E-02); +#158759 = AXIS2_PLACEMENT_3D('',#158760,#158761,#158762); +#158760 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#158761 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#158762 = DIRECTION('',(0.,0.,1.)); +#158763 = CYLINDRICAL_SURFACE('',#158764,7.E-02); +#158764 = AXIS2_PLACEMENT_3D('',#158765,#158766,#158767); +#158765 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#158766 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#158767 = DIRECTION('',(0.,0.,1.)); +#158768 = ADVANCED_FACE('',(#158769),#158793,.F.); +#158769 = FACE_BOUND('',#158770,.F.); +#158770 = EDGE_LOOP('',(#158771,#158779,#158780,#158787)); +#158771 = ORIENTED_EDGE('',*,*,#158772,.F.); +#158772 = EDGE_CURVE('',#158587,#158773,#158775,.T.); +#158773 = VERTEX_POINT('',#158774); +#158774 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#158775 = LINE('',#158776,#158777); +#158776 = CARTESIAN_POINT('',(-0.85,0.175,0.503709028349)); +#158777 = VECTOR('',#158778,1.); +#158778 = DIRECTION('',(0.,0.,1.)); +#158779 = ORIENTED_EDGE('',*,*,#158586,.T.); +#158780 = ORIENTED_EDGE('',*,*,#158781,.T.); +#158781 = EDGE_CURVE('',#158580,#158782,#158784,.T.); +#158782 = VERTEX_POINT('',#158783); +#158783 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#158784 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158785,#158786), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158785 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#158786 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#158787 = ORIENTED_EDGE('',*,*,#158788,.F.); +#158788 = EDGE_CURVE('',#158773,#158782,#158789,.T.); +#158789 = LINE('',#158790,#158791); +#158790 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158791 = VECTOR('',#158792,1.); +#158792 = DIRECTION('',(0.,1.,0.)); +#158793 = PLANE('',#158794); +#158794 = AXIS2_PLACEMENT_3D('',#158795,#158796,#158797); +#158795 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#158796 = DIRECTION('',(1.,0.,0.)); +#158797 = DIRECTION('',(-0.,1.,0.)); +#158798 = ADVANCED_FACE('',(#158799),#158816,.F.); +#158799 = FACE_BOUND('',#158800,.F.); +#158800 = EDGE_LOOP('',(#158801,#158802,#158803,#158811)); +#158801 = ORIENTED_EDGE('',*,*,#158672,.T.); +#158802 = ORIENTED_EDGE('',*,*,#158610,.T.); +#158803 = ORIENTED_EDGE('',*,*,#158804,.F.); +#158804 = EDGE_CURVE('',#158805,#158603,#158807,.T.); +#158805 = VERTEX_POINT('',#158806); +#158806 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158807 = LINE('',#158808,#158809); +#158808 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158809 = VECTOR('',#158810,1.); +#158810 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#158811 = ORIENTED_EDGE('',*,*,#158812,.F.); +#158812 = EDGE_CURVE('',#158665,#158805,#158813,.T.); +#158813 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158814,#158815), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158814 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#158815 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158816 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158817,#158818) + ,(#158819,#158820 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158817 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#158818 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158819 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#158820 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#158821 = ADVANCED_FACE('',(#158822),#158839,.F.); +#158822 = FACE_BOUND('',#158823,.F.); +#158823 = EDGE_LOOP('',(#158824,#158825,#158826,#158834)); +#158824 = ORIENTED_EDGE('',*,*,#158664,.T.); +#158825 = ORIENTED_EDGE('',*,*,#158812,.T.); +#158826 = ORIENTED_EDGE('',*,*,#158827,.F.); +#158827 = EDGE_CURVE('',#158828,#158805,#158830,.T.); +#158828 = VERTEX_POINT('',#158829); +#158829 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#158830 = LINE('',#158831,#158832); +#158831 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#158832 = VECTOR('',#158833,1.); +#158833 = DIRECTION('',(-1.,0.,0.)); +#158834 = ORIENTED_EDGE('',*,*,#158835,.F.); +#158835 = EDGE_CURVE('',#158657,#158828,#158836,.T.); +#158836 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158837,#158838), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158837 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#158838 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#158839 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158840,#158841) + ,(#158842,#158843 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#158840 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#158841 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#158842 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#158843 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158844 = ADVANCED_FACE('',(#158845),#158862,.F.); +#158845 = FACE_BOUND('',#158846,.F.); +#158846 = EDGE_LOOP('',(#158847,#158848,#158855,#158861)); +#158847 = ORIENTED_EDGE('',*,*,#158632,.T.); +#158848 = ORIENTED_EDGE('',*,*,#158849,.T.); +#158849 = EDGE_CURVE('',#158633,#158850,#158852,.T.); +#158850 = VERTEX_POINT('',#158851); +#158851 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#158852 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158853,#158854), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158853 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#158854 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#158855 = ORIENTED_EDGE('',*,*,#158856,.F.); +#158856 = EDGE_CURVE('',#158688,#158850,#158857,.T.); +#158857 = LINE('',#158858,#158859); +#158858 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158859 = VECTOR('',#158860,1.); +#158860 = DIRECTION('',(1.,0.,0.)); +#158861 = ORIENTED_EDGE('',*,*,#158687,.F.); +#158862 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158863,#158864) + ,(#158865,#158866 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#158863 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#158864 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158865 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#158866 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#158867 = ADVANCED_FACE('',(#158868),#158885,.F.); +#158868 = FACE_BOUND('',#158869,.F.); +#158869 = EDGE_LOOP('',(#158870,#158871,#158872,#158880)); +#158870 = ORIENTED_EDGE('',*,*,#158656,.T.); +#158871 = ORIENTED_EDGE('',*,*,#158835,.T.); +#158872 = ORIENTED_EDGE('',*,*,#158873,.F.); +#158873 = EDGE_CURVE('',#158874,#158828,#158876,.T.); +#158874 = VERTEX_POINT('',#158875); +#158875 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#158876 = LINE('',#158877,#158878); +#158877 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#158878 = VECTOR('',#158879,1.); +#158879 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#158880 = ORIENTED_EDGE('',*,*,#158881,.F.); +#158881 = EDGE_CURVE('',#158649,#158874,#158882,.T.); +#158882 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158883,#158884), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158883 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#158884 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#158885 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158886,#158887) + ,(#158888,#158889 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158886 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#158887 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#158888 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#158889 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#158890 = ADVANCED_FACE('',(#158891),#158908,.F.); +#158891 = FACE_BOUND('',#158892,.F.); +#158892 = EDGE_LOOP('',(#158893,#158894,#158901,#158907)); +#158893 = ORIENTED_EDGE('',*,*,#158640,.T.); +#158894 = ORIENTED_EDGE('',*,*,#158895,.T.); +#158895 = EDGE_CURVE('',#158641,#158896,#158898,.T.); +#158896 = VERTEX_POINT('',#158897); +#158897 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158898 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158899,#158900), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158899 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#158900 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158901 = ORIENTED_EDGE('',*,*,#158902,.F.); +#158902 = EDGE_CURVE('',#158850,#158896,#158903,.T.); +#158903 = LINE('',#158904,#158905); +#158904 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#158905 = VECTOR('',#158906,1.); +#158906 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#158907 = ORIENTED_EDGE('',*,*,#158849,.F.); +#158908 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158909,#158910) + ,(#158911,#158912 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#158909 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#158910 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#158911 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#158912 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158913 = ADVANCED_FACE('',(#158914),#158941,.F.); +#158914 = FACE_BOUND('',#158915,.F.); +#158915 = EDGE_LOOP('',(#158916,#158917,#158918,#158926,#158934,#158940) + ); +#158916 = ORIENTED_EDGE('',*,*,#158648,.T.); +#158917 = ORIENTED_EDGE('',*,*,#158881,.T.); +#158918 = ORIENTED_EDGE('',*,*,#158919,.F.); +#158919 = EDGE_CURVE('',#158920,#158874,#158922,.T.); +#158920 = VERTEX_POINT('',#158921); +#158921 = CARTESIAN_POINT('',(0.85,-0.175,0.525)); +#158922 = LINE('',#158923,#158924); +#158923 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158924 = VECTOR('',#158925,1.); +#158925 = DIRECTION('',(0.,-1.,0.)); +#158926 = ORIENTED_EDGE('',*,*,#158927,.F.); +#158927 = EDGE_CURVE('',#158928,#158920,#158930,.T.); +#158928 = VERTEX_POINT('',#158929); +#158929 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#158930 = LINE('',#158931,#158932); +#158931 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#158932 = VECTOR('',#158933,1.); +#158933 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#158934 = ORIENTED_EDGE('',*,*,#158935,.F.); +#158935 = EDGE_CURVE('',#158896,#158928,#158936,.T.); +#158936 = LINE('',#158937,#158938); +#158937 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158938 = VECTOR('',#158939,1.); +#158939 = DIRECTION('',(0.,-1.,0.)); +#158940 = ORIENTED_EDGE('',*,*,#158895,.F.); +#158941 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#158942,#158943) + ,(#158944,#158945 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#158942 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#158943 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#158944 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#158945 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#158946 = ADVANCED_FACE('',(#158947),#158964,.F.); +#158947 = FACE_BOUND('',#158948,.F.); +#158948 = EDGE_LOOP('',(#158949,#158950,#158957,#158963)); +#158949 = ORIENTED_EDGE('',*,*,#158694,.T.); +#158950 = ORIENTED_EDGE('',*,*,#158951,.T.); +#158951 = EDGE_CURVE('',#158688,#158952,#158954,.T.); +#158952 = VERTEX_POINT('',#158953); +#158953 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#158954 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158955,#158956), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158955 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#158956 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#158957 = ORIENTED_EDGE('',*,*,#158958,.F.); +#158958 = EDGE_CURVE('',#158782,#158952,#158959,.T.); +#158959 = LINE('',#158960,#158961); +#158960 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#158961 = VECTOR('',#158962,1.); +#158962 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158963 = ORIENTED_EDGE('',*,*,#158781,.F.); +#158964 = PLANE('',#158965); +#158965 = AXIS2_PLACEMENT_3D('',#158966,#158967,#158968); +#158966 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#158967 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#158968 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158969 = ADVANCED_FACE('',(#158970),#158987,.F.); +#158970 = FACE_BOUND('',#158971,.F.); +#158971 = EDGE_LOOP('',(#158972,#158973,#158974,#158982)); +#158972 = ORIENTED_EDGE('',*,*,#158804,.T.); +#158973 = ORIENTED_EDGE('',*,*,#158709,.T.); +#158974 = ORIENTED_EDGE('',*,*,#158975,.F.); +#158975 = EDGE_CURVE('',#158976,#158710,#158978,.T.); +#158976 = VERTEX_POINT('',#158977); +#158977 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#158978 = LINE('',#158979,#158980); +#158979 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#158980 = VECTOR('',#158981,1.); +#158981 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#158982 = ORIENTED_EDGE('',*,*,#158983,.F.); +#158983 = EDGE_CURVE('',#158805,#158976,#158984,.T.); +#158984 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#158985,#158986), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#158985 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#158986 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#158987 = PLANE('',#158988); +#158988 = AXIS2_PLACEMENT_3D('',#158989,#158990,#158991); +#158989 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#158990 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#158991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#158992 = ADVANCED_FACE('',(#158993),#159075,.F.); +#158993 = FACE_BOUND('',#158994,.F.); +#158994 = EDGE_LOOP('',(#158995,#158996,#158997,#159005,#159013,#159021, + #159029,#159037,#159045,#159053,#159061,#159069)); +#158995 = ORIENTED_EDGE('',*,*,#158975,.T.); +#158996 = ORIENTED_EDGE('',*,*,#158725,.T.); +#158997 = ORIENTED_EDGE('',*,*,#158998,.T.); +#158998 = EDGE_CURVE('',#158718,#158999,#159001,.T.); +#158999 = VERTEX_POINT('',#159000); +#159000 = CARTESIAN_POINT('',(-0.825,-0.175,0.675)); +#159001 = LINE('',#159002,#159003); +#159002 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#159003 = VECTOR('',#159004,1.); +#159004 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159005 = ORIENTED_EDGE('',*,*,#159006,.F.); +#159006 = EDGE_CURVE('',#159007,#158999,#159009,.T.); +#159007 = VERTEX_POINT('',#159008); +#159008 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159009 = LINE('',#159010,#159011); +#159010 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159011 = VECTOR('',#159012,1.); +#159012 = DIRECTION('',(0.,1.,0.)); +#159013 = ORIENTED_EDGE('',*,*,#159014,.F.); +#159014 = EDGE_CURVE('',#159015,#159007,#159017,.T.); +#159015 = VERTEX_POINT('',#159016); +#159016 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#159017 = LINE('',#159018,#159019); +#159018 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#159019 = VECTOR('',#159020,1.); +#159020 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#159021 = ORIENTED_EDGE('',*,*,#159022,.F.); +#159022 = EDGE_CURVE('',#159023,#159015,#159025,.T.); +#159023 = VERTEX_POINT('',#159024); +#159024 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#159025 = LINE('',#159026,#159027); +#159026 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#159027 = VECTOR('',#159028,1.); +#159028 = DIRECTION('',(-1.,0.,0.)); +#159029 = ORIENTED_EDGE('',*,*,#159030,.F.); +#159030 = EDGE_CURVE('',#159031,#159023,#159033,.T.); +#159031 = VERTEX_POINT('',#159032); +#159032 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#159033 = LINE('',#159034,#159035); +#159034 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#159035 = VECTOR('',#159036,1.); +#159036 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#159037 = ORIENTED_EDGE('',*,*,#159038,.F.); +#159038 = EDGE_CURVE('',#159039,#159031,#159041,.T.); +#159039 = VERTEX_POINT('',#159040); +#159040 = CARTESIAN_POINT('',(0.825,-0.175,0.675)); +#159041 = LINE('',#159042,#159043); +#159042 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159043 = VECTOR('',#159044,1.); +#159044 = DIRECTION('',(0.,-1.,0.)); +#159045 = ORIENTED_EDGE('',*,*,#159046,.F.); +#159046 = EDGE_CURVE('',#159047,#159039,#159049,.T.); +#159047 = VERTEX_POINT('',#159048); +#159048 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#159049 = LINE('',#159050,#159051); +#159050 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#159051 = VECTOR('',#159052,1.); +#159052 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#159053 = ORIENTED_EDGE('',*,*,#159054,.T.); +#159054 = EDGE_CURVE('',#159047,#159055,#159057,.T.); +#159055 = VERTEX_POINT('',#159056); +#159056 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#159057 = LINE('',#159058,#159059); +#159058 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159059 = VECTOR('',#159060,1.); +#159060 = DIRECTION('',(0.,-1.,0.)); +#159061 = ORIENTED_EDGE('',*,*,#159062,.T.); +#159062 = EDGE_CURVE('',#159055,#159063,#159065,.T.); +#159063 = VERTEX_POINT('',#159064); +#159064 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#159065 = LINE('',#159066,#159067); +#159066 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#159067 = VECTOR('',#159068,1.); +#159068 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#159069 = ORIENTED_EDGE('',*,*,#159070,.T.); +#159070 = EDGE_CURVE('',#159063,#158976,#159071,.T.); +#159071 = LINE('',#159072,#159073); +#159072 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#159073 = VECTOR('',#159074,1.); +#159074 = DIRECTION('',(-1.,0.,0.)); +#159075 = PLANE('',#159076); +#159076 = AXIS2_PLACEMENT_3D('',#159077,#159078,#159079); +#159077 = CARTESIAN_POINT('',(-0.8375,1.101047627727E-17,0.675)); +#159078 = DIRECTION('',(-4.586476420025E-27,1.633860438167E-31,-1.)); +#159079 = DIRECTION('',(1.568703130043E-18,1.,1.633860438167E-31)); +#159080 = ADVANCED_FACE('',(#159081),#159150,.F.); +#159081 = FACE_BOUND('',#159082,.F.); +#159082 = EDGE_LOOP('',(#159083,#159084,#159085,#159093,#159102,#159110, + #159118,#159126,#159135,#159143)); +#159083 = ORIENTED_EDGE('',*,*,#158717,.F.); +#159084 = ORIENTED_EDGE('',*,*,#158757,.T.); +#159085 = ORIENTED_EDGE('',*,*,#159086,.T.); +#159086 = EDGE_CURVE('',#158750,#159087,#159089,.T.); +#159087 = VERTEX_POINT('',#159088); +#159088 = CARTESIAN_POINT('',(-0.964779134804,-0.175,0.181797400913)); +#159089 = LINE('',#159090,#159091); +#159090 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#159091 = VECTOR('',#159092,1.); +#159092 = DIRECTION('',(-0.158615661317,1.760987592604E-17, + -0.987340403298)); +#159093 = ORIENTED_EDGE('',*,*,#159094,.T.); +#159094 = EDGE_CURVE('',#159087,#159095,#159097,.T.); +#159095 = VERTEX_POINT('',#159096); +#159096 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17 + )); +#159097 = CIRCLE('',#159098,0.22); +#159098 = AXIS2_PLACEMENT_3D('',#159099,#159100,#159101); +#159099 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#159100 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#159101 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#159102 = ORIENTED_EDGE('',*,*,#159103,.T.); +#159103 = EDGE_CURVE('',#159095,#159104,#159106,.T.); +#159104 = VERTEX_POINT('',#159105); +#159105 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#159106 = LINE('',#159107,#159108); +#159107 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17 + )); +#159108 = VECTOR('',#159109,1.); +#159109 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#159110 = ORIENTED_EDGE('',*,*,#159111,.T.); +#159111 = EDGE_CURVE('',#159104,#159112,#159114,.T.); +#159112 = VERTEX_POINT('',#159113); +#159113 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#159114 = LINE('',#159115,#159116); +#159115 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#159116 = VECTOR('',#159117,1.); +#159117 = DIRECTION('',(0.,0.,1.)); +#159118 = ORIENTED_EDGE('',*,*,#159119,.T.); +#159119 = EDGE_CURVE('',#159112,#159120,#159122,.T.); +#159120 = VERTEX_POINT('',#159121); +#159121 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.15)); +#159122 = LINE('',#159123,#159124); +#159123 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#159124 = VECTOR('',#159125,1.); +#159125 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159126 = ORIENTED_EDGE('',*,*,#159127,.T.); +#159127 = EDGE_CURVE('',#159120,#159128,#159130,.T.); +#159128 = VERTEX_POINT('',#159129); +#159129 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#159130 = CIRCLE('',#159131,7.E-02); +#159131 = AXIS2_PLACEMENT_3D('',#159132,#159133,#159134); +#159132 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#159133 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#159134 = DIRECTION('',(0.,0.,-1.)); +#159135 = ORIENTED_EDGE('',*,*,#159136,.T.); +#159136 = EDGE_CURVE('',#159128,#159137,#159139,.T.); +#159137 = VERTEX_POINT('',#159138); +#159138 = CARTESIAN_POINT('',(-1.066657705663,-0.175,0.493202599087)); +#159139 = LINE('',#159140,#159141); +#159140 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#159141 = VECTOR('',#159142,1.); +#159142 = DIRECTION('',(0.158615661317,-1.760987592604E-17, + 0.987340403298)); +#159143 = ORIENTED_EDGE('',*,*,#159144,.T.); +#159144 = EDGE_CURVE('',#159137,#158718,#159145,.T.); +#159145 = CIRCLE('',#159146,0.22); +#159146 = AXIS2_PLACEMENT_3D('',#159147,#159148,#159149); +#159147 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#159148 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#159149 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#159150 = PLANE('',#159151); +#159151 = AXIS2_PLACEMENT_3D('',#159152,#159153,#159154); +#159152 = CARTESIAN_POINT('',(-1.021526355437,-0.175,0.332418056697)); +#159153 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159154 = DIRECTION('',(0.,-0.,1.)); +#159155 = ADVANCED_FACE('',(#159156),#159174,.F.); +#159156 = FACE_BOUND('',#159157,.F.); +#159157 = EDGE_LOOP('',(#159158,#159159,#159167,#159173)); +#159158 = ORIENTED_EDGE('',*,*,#158749,.T.); +#159159 = ORIENTED_EDGE('',*,*,#159160,.T.); +#159160 = EDGE_CURVE('',#158741,#159161,#159163,.T.); +#159161 = VERTEX_POINT('',#159162); +#159162 = CARTESIAN_POINT('',(-0.964779134804,0.175,0.181797400913)); +#159163 = LINE('',#159164,#159165); +#159164 = CARTESIAN_POINT('',(-0.918936542711,0.175,0.467155372437)); +#159165 = VECTOR('',#159166,1.); +#159166 = DIRECTION('',(-0.158615661317,1.760987592604E-17, + -0.987340403298)); +#159167 = ORIENTED_EDGE('',*,*,#159168,.F.); +#159168 = EDGE_CURVE('',#159087,#159161,#159169,.T.); +#159169 = LINE('',#159170,#159171); +#159170 = CARTESIAN_POINT('',(-0.964779134804,-0.175,0.181797400913)); +#159171 = VECTOR('',#159172,1.); +#159172 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159173 = ORIENTED_EDGE('',*,*,#159086,.F.); +#159174 = PLANE('',#159175); +#159175 = AXIS2_PLACEMENT_3D('',#159176,#159177,#159178); +#159176 = CARTESIAN_POINT('',(-0.918936542711,-0.175,0.467155372437)); +#159177 = DIRECTION('',(-0.987340403298,1.096168048884E-16, + 0.158615661317)); +#159178 = DIRECTION('',(-0.158615661317,1.760987592604E-17, + -0.987340403298)); +#159179 = ADVANCED_FACE('',(#159180),#159242,.T.); +#159180 = FACE_BOUND('',#159181,.T.); +#159181 = EDGE_LOOP('',(#159182,#159183,#159184,#159185,#159194,#159202, + #159210,#159218,#159227,#159235)); +#159182 = ORIENTED_EDGE('',*,*,#158772,.F.); +#159183 = ORIENTED_EDGE('',*,*,#158740,.T.); +#159184 = ORIENTED_EDGE('',*,*,#159160,.T.); +#159185 = ORIENTED_EDGE('',*,*,#159186,.T.); +#159186 = EDGE_CURVE('',#159161,#159187,#159189,.T.); +#159187 = VERTEX_POINT('',#159188); +#159188 = CARTESIAN_POINT('',(-1.181436840466,0.175,-5.551115123126E-17) + ); +#159189 = CIRCLE('',#159190,0.22); +#159190 = AXIS2_PLACEMENT_3D('',#159191,#159192,#159193); +#159191 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.22)); +#159192 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#159193 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#159194 = ORIENTED_EDGE('',*,*,#159195,.T.); +#159195 = EDGE_CURVE('',#159187,#159196,#159198,.T.); +#159196 = VERTEX_POINT('',#159197); +#159197 = CARTESIAN_POINT('',(-1.25,0.175,-5.551115123126E-17)); +#159198 = LINE('',#159199,#159200); +#159199 = CARTESIAN_POINT('',(-1.181436840466,0.175,-5.551115123126E-17) + ); +#159200 = VECTOR('',#159201,1.); +#159201 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#159202 = ORIENTED_EDGE('',*,*,#159203,.T.); +#159203 = EDGE_CURVE('',#159196,#159204,#159206,.T.); +#159204 = VERTEX_POINT('',#159205); +#159205 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#159206 = LINE('',#159207,#159208); +#159207 = CARTESIAN_POINT('',(-1.25,0.175,-5.551115123126E-17)); +#159208 = VECTOR('',#159209,1.); +#159209 = DIRECTION('',(0.,0.,1.)); +#159210 = ORIENTED_EDGE('',*,*,#159211,.T.); +#159211 = EDGE_CURVE('',#159204,#159212,#159214,.T.); +#159212 = VERTEX_POINT('',#159213); +#159213 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.15)); +#159214 = LINE('',#159215,#159216); +#159215 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#159216 = VECTOR('',#159217,1.); +#159217 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159218 = ORIENTED_EDGE('',*,*,#159219,.T.); +#159219 = EDGE_CURVE('',#159212,#159220,#159222,.T.); +#159220 = VERTEX_POINT('',#159221); +#159221 = CARTESIAN_POINT('',(-1.112500297756,0.175,0.207844627563)); +#159222 = CIRCLE('',#159223,7.E-02); +#159223 = AXIS2_PLACEMENT_3D('',#159224,#159225,#159226); +#159224 = CARTESIAN_POINT('',(-1.181436840466,0.175,0.22)); +#159225 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#159226 = DIRECTION('',(0.,0.,-1.)); +#159227 = ORIENTED_EDGE('',*,*,#159228,.T.); +#159228 = EDGE_CURVE('',#159220,#159229,#159231,.T.); +#159229 = VERTEX_POINT('',#159230); +#159230 = CARTESIAN_POINT('',(-1.066657705663,0.175,0.493202599087)); +#159231 = LINE('',#159232,#159233); +#159232 = CARTESIAN_POINT('',(-1.112500297756,0.175,0.207844627563)); +#159233 = VECTOR('',#159234,1.); +#159234 = DIRECTION('',(0.158615661317,-1.760987592604E-17, + 0.987340403298)); +#159235 = ORIENTED_EDGE('',*,*,#159236,.T.); +#159236 = EDGE_CURVE('',#159229,#158773,#159237,.T.); +#159237 = CIRCLE('',#159238,0.22); +#159238 = AXIS2_PLACEMENT_3D('',#159239,#159240,#159241); +#159239 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#159240 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#159241 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#159242 = PLANE('',#159243); +#159243 = AXIS2_PLACEMENT_3D('',#159244,#159245,#159246); +#159244 = CARTESIAN_POINT('',(-1.021526355437,0.175,0.332418056697)); +#159245 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159246 = DIRECTION('',(0.,-0.,1.)); +#159247 = ADVANCED_FACE('',(#159248),#159330,.F.); +#159248 = FACE_BOUND('',#159249,.F.); +#159249 = EDGE_LOOP('',(#159250,#159258,#159259,#159260,#159268,#159276, + #159284,#159292,#159300,#159308,#159316,#159324)); +#159250 = ORIENTED_EDGE('',*,*,#159251,.F.); +#159251 = EDGE_CURVE('',#158773,#159252,#159254,.T.); +#159252 = VERTEX_POINT('',#159253); +#159253 = CARTESIAN_POINT('',(-0.825,0.175,0.675)); +#159254 = LINE('',#159255,#159256); +#159255 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#159256 = VECTOR('',#159257,1.); +#159257 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159258 = ORIENTED_EDGE('',*,*,#158788,.T.); +#159259 = ORIENTED_EDGE('',*,*,#158958,.T.); +#159260 = ORIENTED_EDGE('',*,*,#159261,.T.); +#159261 = EDGE_CURVE('',#158952,#159262,#159264,.T.); +#159262 = VERTEX_POINT('',#159263); +#159263 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#159264 = LINE('',#159265,#159266); +#159265 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#159266 = VECTOR('',#159267,1.); +#159267 = DIRECTION('',(1.,0.,0.)); +#159268 = ORIENTED_EDGE('',*,*,#159269,.T.); +#159269 = EDGE_CURVE('',#159262,#159270,#159272,.T.); +#159270 = VERTEX_POINT('',#159271); +#159271 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159272 = LINE('',#159273,#159274); +#159273 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#159274 = VECTOR('',#159275,1.); +#159275 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159276 = ORIENTED_EDGE('',*,*,#159277,.T.); +#159277 = EDGE_CURVE('',#159270,#159278,#159280,.T.); +#159278 = VERTEX_POINT('',#159279); +#159279 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#159280 = LINE('',#159281,#159282); +#159281 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159282 = VECTOR('',#159283,1.); +#159283 = DIRECTION('',(0.,-1.,0.)); +#159284 = ORIENTED_EDGE('',*,*,#159285,.T.); +#159285 = EDGE_CURVE('',#159278,#159286,#159288,.T.); +#159286 = VERTEX_POINT('',#159287); +#159287 = CARTESIAN_POINT('',(0.825,0.175,0.675)); +#159288 = LINE('',#159289,#159290); +#159289 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#159290 = VECTOR('',#159291,1.); +#159291 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#159292 = ORIENTED_EDGE('',*,*,#159293,.F.); +#159293 = EDGE_CURVE('',#159294,#159286,#159296,.T.); +#159294 = VERTEX_POINT('',#159295); +#159295 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159296 = LINE('',#159297,#159298); +#159297 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159298 = VECTOR('',#159299,1.); +#159299 = DIRECTION('',(0.,-1.,0.)); +#159300 = ORIENTED_EDGE('',*,*,#159301,.F.); +#159301 = EDGE_CURVE('',#159302,#159294,#159304,.T.); +#159302 = VERTEX_POINT('',#159303); +#159303 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#159304 = LINE('',#159305,#159306); +#159305 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#159306 = VECTOR('',#159307,1.); +#159307 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159308 = ORIENTED_EDGE('',*,*,#159309,.F.); +#159309 = EDGE_CURVE('',#159310,#159302,#159312,.T.); +#159310 = VERTEX_POINT('',#159311); +#159311 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#159312 = LINE('',#159313,#159314); +#159313 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#159314 = VECTOR('',#159315,1.); +#159315 = DIRECTION('',(1.,0.,0.)); +#159316 = ORIENTED_EDGE('',*,*,#159317,.F.); +#159317 = EDGE_CURVE('',#159318,#159310,#159320,.T.); +#159318 = VERTEX_POINT('',#159319); +#159319 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#159320 = LINE('',#159321,#159322); +#159321 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#159322 = VECTOR('',#159323,1.); +#159323 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#159324 = ORIENTED_EDGE('',*,*,#159325,.F.); +#159325 = EDGE_CURVE('',#159252,#159318,#159326,.T.); +#159326 = LINE('',#159327,#159328); +#159327 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159328 = VECTOR('',#159329,1.); +#159329 = DIRECTION('',(0.,1.,0.)); +#159330 = PLANE('',#159331); +#159331 = AXIS2_PLACEMENT_3D('',#159332,#159333,#159334); +#159332 = CARTESIAN_POINT('',(-0.8375,1.101047627727E-17,0.675)); +#159333 = DIRECTION('',(-4.586476420025E-27,1.633860438167E-31,-1.)); +#159334 = DIRECTION('',(1.568703130043E-18,1.,1.633860438167E-31)); +#159335 = ADVANCED_FACE('',(#159336),#159346,.F.); +#159336 = FACE_BOUND('',#159337,.F.); +#159337 = EDGE_LOOP('',(#159338,#159339,#159340,#159341)); +#159338 = ORIENTED_EDGE('',*,*,#158827,.T.); +#159339 = ORIENTED_EDGE('',*,*,#158983,.T.); +#159340 = ORIENTED_EDGE('',*,*,#159070,.F.); +#159341 = ORIENTED_EDGE('',*,*,#159342,.F.); +#159342 = EDGE_CURVE('',#158828,#159063,#159343,.T.); +#159343 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159344,#159345), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159344 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#159345 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#159346 = PLANE('',#159347); +#159347 = AXIS2_PLACEMENT_3D('',#159348,#159349,#159350); +#159348 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#159349 = DIRECTION('',(0.,1.,0.)); +#159350 = DIRECTION('',(-1.,0.,0.)); +#159351 = ADVANCED_FACE('',(#159352),#159362,.F.); +#159352 = FACE_BOUND('',#159353,.F.); +#159353 = EDGE_LOOP('',(#159354,#159355,#159360,#159361)); +#159354 = ORIENTED_EDGE('',*,*,#158856,.T.); +#159355 = ORIENTED_EDGE('',*,*,#159356,.T.); +#159356 = EDGE_CURVE('',#158850,#159262,#159357,.T.); +#159357 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159358,#159359), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159358 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#159359 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#159360 = ORIENTED_EDGE('',*,*,#159261,.F.); +#159361 = ORIENTED_EDGE('',*,*,#158951,.F.); +#159362 = PLANE('',#159363); +#159363 = AXIS2_PLACEMENT_3D('',#159364,#159365,#159366); +#159364 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#159365 = DIRECTION('',(0.,-1.,0.)); +#159366 = DIRECTION('',(1.,0.,0.)); +#159367 = ADVANCED_FACE('',(#159368),#159378,.F.); +#159368 = FACE_BOUND('',#159369,.F.); +#159369 = EDGE_LOOP('',(#159370,#159371,#159372,#159373)); +#159370 = ORIENTED_EDGE('',*,*,#158873,.T.); +#159371 = ORIENTED_EDGE('',*,*,#159342,.T.); +#159372 = ORIENTED_EDGE('',*,*,#159062,.F.); +#159373 = ORIENTED_EDGE('',*,*,#159374,.F.); +#159374 = EDGE_CURVE('',#158874,#159055,#159375,.T.); +#159375 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159376,#159377), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159376 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#159377 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#159378 = PLANE('',#159379); +#159379 = AXIS2_PLACEMENT_3D('',#159380,#159381,#159382); +#159380 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#159381 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#159382 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#159383 = ADVANCED_FACE('',(#159384),#159394,.F.); +#159384 = FACE_BOUND('',#159385,.F.); +#159385 = EDGE_LOOP('',(#159386,#159387,#159392,#159393)); +#159386 = ORIENTED_EDGE('',*,*,#158902,.T.); +#159387 = ORIENTED_EDGE('',*,*,#159388,.T.); +#159388 = EDGE_CURVE('',#158896,#159270,#159389,.T.); +#159389 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159390,#159391), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159390 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#159391 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159392 = ORIENTED_EDGE('',*,*,#159269,.F.); +#159393 = ORIENTED_EDGE('',*,*,#159356,.F.); +#159394 = PLANE('',#159395); +#159395 = AXIS2_PLACEMENT_3D('',#159396,#159397,#159398); +#159396 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#159397 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#159398 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159399 = ADVANCED_FACE('',(#159400),#159411,.F.); +#159400 = FACE_BOUND('',#159401,.F.); +#159401 = EDGE_LOOP('',(#159402,#159403,#159404,#159410)); +#159402 = ORIENTED_EDGE('',*,*,#159388,.F.); +#159403 = ORIENTED_EDGE('',*,*,#158935,.T.); +#159404 = ORIENTED_EDGE('',*,*,#159405,.T.); +#159405 = EDGE_CURVE('',#158928,#159278,#159406,.T.); +#159406 = LINE('',#159407,#159408); +#159407 = CARTESIAN_POINT('',(0.85,0.175,0.503709028349)); +#159408 = VECTOR('',#159409,1.); +#159409 = DIRECTION('',(0.,0.,1.)); +#159410 = ORIENTED_EDGE('',*,*,#159277,.F.); +#159411 = PLANE('',#159412); +#159412 = AXIS2_PLACEMENT_3D('',#159413,#159414,#159415); +#159413 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159414 = DIRECTION('',(-1.,0.,0.)); +#159415 = DIRECTION('',(0.,-1.,0.)); +#159416 = ADVANCED_FACE('',(#159417),#159444,.F.); +#159417 = FACE_BOUND('',#159418,.F.); +#159418 = EDGE_LOOP('',(#159419,#159420,#159429,#159437)); +#159419 = ORIENTED_EDGE('',*,*,#158927,.T.); +#159420 = ORIENTED_EDGE('',*,*,#159421,.T.); +#159421 = EDGE_CURVE('',#158920,#159422,#159424,.T.); +#159422 = VERTEX_POINT('',#159423); +#159423 = CARTESIAN_POINT('',(0.918936542711,-0.175,0.467155372437)); +#159424 = CIRCLE('',#159425,7.E-02); +#159425 = AXIS2_PLACEMENT_3D('',#159426,#159427,#159428); +#159426 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#159427 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#159428 = DIRECTION('',(0.,0.,1.)); +#159429 = ORIENTED_EDGE('',*,*,#159430,.F.); +#159430 = EDGE_CURVE('',#159431,#159422,#159433,.T.); +#159431 = VERTEX_POINT('',#159432); +#159432 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#159433 = LINE('',#159434,#159435); +#159434 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#159435 = VECTOR('',#159436,1.); +#159436 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159437 = ORIENTED_EDGE('',*,*,#159438,.F.); +#159438 = EDGE_CURVE('',#158928,#159431,#159439,.T.); +#159439 = CIRCLE('',#159440,7.E-02); +#159440 = AXIS2_PLACEMENT_3D('',#159441,#159442,#159443); +#159441 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#159442 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#159443 = DIRECTION('',(0.,0.,1.)); +#159444 = CYLINDRICAL_SURFACE('',#159445,7.E-02); +#159445 = AXIS2_PLACEMENT_3D('',#159446,#159447,#159448); +#159446 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#159447 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#159448 = DIRECTION('',(0.,-0.,1.)); +#159449 = ADVANCED_FACE('',(#159450),#159461,.F.); +#159450 = FACE_BOUND('',#159451,.F.); +#159451 = EDGE_LOOP('',(#159452,#159458,#159459,#159460)); +#159452 = ORIENTED_EDGE('',*,*,#159453,.F.); +#159453 = EDGE_CURVE('',#158920,#159047,#159454,.T.); +#159454 = LINE('',#159455,#159456); +#159455 = CARTESIAN_POINT('',(0.85,-0.175,0.503709028349)); +#159456 = VECTOR('',#159457,1.); +#159457 = DIRECTION('',(0.,0.,1.)); +#159458 = ORIENTED_EDGE('',*,*,#158919,.T.); +#159459 = ORIENTED_EDGE('',*,*,#159374,.T.); +#159460 = ORIENTED_EDGE('',*,*,#159054,.F.); +#159461 = PLANE('',#159462); +#159462 = AXIS2_PLACEMENT_3D('',#159463,#159464,#159465); +#159463 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#159464 = DIRECTION('',(-1.,0.,0.)); +#159465 = DIRECTION('',(0.,-1.,0.)); +#159466 = ADVANCED_FACE('',(#159467),#159483,.F.); +#159467 = FACE_BOUND('',#159468,.F.); +#159468 = EDGE_LOOP('',(#159469,#159470,#159476,#159477)); +#159469 = ORIENTED_EDGE('',*,*,#159285,.F.); +#159470 = ORIENTED_EDGE('',*,*,#159471,.T.); +#159471 = EDGE_CURVE('',#159278,#159047,#159472,.T.); +#159472 = LINE('',#159473,#159474); +#159473 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#159474 = VECTOR('',#159475,1.); +#159475 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159476 = ORIENTED_EDGE('',*,*,#159046,.T.); +#159477 = ORIENTED_EDGE('',*,*,#159478,.F.); +#159478 = EDGE_CURVE('',#159286,#159039,#159479,.T.); +#159479 = LINE('',#159480,#159481); +#159480 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159481 = VECTOR('',#159482,1.); +#159482 = DIRECTION('',(0.,-1.,0.)); +#159483 = PLANE('',#159484); +#159484 = AXIS2_PLACEMENT_3D('',#159485,#159486,#159487); +#159485 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#159486 = DIRECTION('',(0.,0.,-1.)); +#159487 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#159488 = ADVANCED_FACE('',(#159489),#159514,.F.); +#159489 = FACE_BOUND('',#159490,.F.); +#159490 = EDGE_LOOP('',(#159491,#159492,#159493,#159494,#159501,#159509) + ); +#159491 = ORIENTED_EDGE('',*,*,#159293,.T.); +#159492 = ORIENTED_EDGE('',*,*,#159478,.T.); +#159493 = ORIENTED_EDGE('',*,*,#159038,.T.); +#159494 = ORIENTED_EDGE('',*,*,#159495,.T.); +#159495 = EDGE_CURVE('',#159031,#159496,#159498,.T.); +#159496 = VERTEX_POINT('',#159497); +#159497 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#159498 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159499,#159500), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159499 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#159500 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#159501 = ORIENTED_EDGE('',*,*,#159502,.F.); +#159502 = EDGE_CURVE('',#159503,#159496,#159505,.T.); +#159503 = VERTEX_POINT('',#159504); +#159504 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#159505 = LINE('',#159506,#159507); +#159506 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#159507 = VECTOR('',#159508,1.); +#159508 = DIRECTION('',(0.,-1.,0.)); +#159509 = ORIENTED_EDGE('',*,*,#159510,.F.); +#159510 = EDGE_CURVE('',#159294,#159503,#159511,.T.); +#159511 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159512,#159513), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159512 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159513 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#159514 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159515,#159516) + ,(#159517,#159518 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#159515 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159516 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#159517 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#159518 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#159519 = ADVANCED_FACE('',(#159520),#159537,.F.); +#159520 = FACE_BOUND('',#159521,.F.); +#159521 = EDGE_LOOP('',(#159522,#159523,#159530,#159536)); +#159522 = ORIENTED_EDGE('',*,*,#159030,.T.); +#159523 = ORIENTED_EDGE('',*,*,#159524,.T.); +#159524 = EDGE_CURVE('',#159023,#159525,#159527,.T.); +#159525 = VERTEX_POINT('',#159526); +#159526 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#159527 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159528,#159529), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159528 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#159529 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#159530 = ORIENTED_EDGE('',*,*,#159531,.F.); +#159531 = EDGE_CURVE('',#159496,#159525,#159532,.T.); +#159532 = LINE('',#159533,#159534); +#159533 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#159534 = VECTOR('',#159535,1.); +#159535 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#159536 = ORIENTED_EDGE('',*,*,#159495,.F.); +#159537 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159538,#159539) + ,(#159540,#159541 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#159538 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#159539 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#159540 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#159541 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#159542 = ADVANCED_FACE('',(#159543),#159560,.F.); +#159543 = FACE_BOUND('',#159544,.F.); +#159544 = EDGE_LOOP('',(#159545,#159546,#159553,#159559)); +#159545 = ORIENTED_EDGE('',*,*,#159022,.T.); +#159546 = ORIENTED_EDGE('',*,*,#159547,.T.); +#159547 = EDGE_CURVE('',#159015,#159548,#159550,.T.); +#159548 = VERTEX_POINT('',#159549); +#159549 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#159550 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159551,#159552), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159551 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#159552 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#159553 = ORIENTED_EDGE('',*,*,#159554,.F.); +#159554 = EDGE_CURVE('',#159525,#159548,#159555,.T.); +#159555 = LINE('',#159556,#159557); +#159556 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#159557 = VECTOR('',#159558,1.); +#159558 = DIRECTION('',(-1.,0.,0.)); +#159559 = ORIENTED_EDGE('',*,*,#159524,.F.); +#159560 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159561,#159562) + ,(#159563,#159564 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#159561 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#159562 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#159563 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#159564 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#159565 = ADVANCED_FACE('',(#159566),#159583,.F.); +#159566 = FACE_BOUND('',#159567,.F.); +#159567 = EDGE_LOOP('',(#159568,#159569,#159576,#159582)); +#159568 = ORIENTED_EDGE('',*,*,#159014,.T.); +#159569 = ORIENTED_EDGE('',*,*,#159570,.T.); +#159570 = EDGE_CURVE('',#159007,#159571,#159573,.T.); +#159571 = VERTEX_POINT('',#159572); +#159572 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#159573 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159574,#159575), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159574 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159575 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#159576 = ORIENTED_EDGE('',*,*,#159577,.F.); +#159577 = EDGE_CURVE('',#159548,#159571,#159578,.T.); +#159578 = LINE('',#159579,#159580); +#159579 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#159580 = VECTOR('',#159581,1.); +#159581 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#159582 = ORIENTED_EDGE('',*,*,#159547,.F.); +#159583 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159584,#159585) + ,(#159586,#159587 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#159584 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#159585 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#159586 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159587 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#159588 = ADVANCED_FACE('',(#159589),#159613,.F.); +#159589 = FACE_BOUND('',#159590,.F.); +#159590 = EDGE_LOOP('',(#159591,#159592,#159598,#159599,#159606,#159612) + ); +#159591 = ORIENTED_EDGE('',*,*,#159006,.T.); +#159592 = ORIENTED_EDGE('',*,*,#159593,.T.); +#159593 = EDGE_CURVE('',#158999,#159252,#159594,.T.); +#159594 = LINE('',#159595,#159596); +#159595 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159596 = VECTOR('',#159597,1.); +#159597 = DIRECTION('',(0.,1.,0.)); +#159598 = ORIENTED_EDGE('',*,*,#159325,.T.); +#159599 = ORIENTED_EDGE('',*,*,#159600,.T.); +#159600 = EDGE_CURVE('',#159318,#159601,#159603,.T.); +#159601 = VERTEX_POINT('',#159602); +#159602 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#159603 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159604,#159605), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159604 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#159605 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#159606 = ORIENTED_EDGE('',*,*,#159607,.F.); +#159607 = EDGE_CURVE('',#159571,#159601,#159608,.T.); +#159608 = LINE('',#159609,#159610); +#159609 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#159610 = VECTOR('',#159611,1.); +#159611 = DIRECTION('',(0.,1.,0.)); +#159612 = ORIENTED_EDGE('',*,*,#159570,.F.); +#159613 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159614,#159615) + ,(#159616,#159617 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#159614 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#159615 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#159616 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#159617 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#159618 = ADVANCED_FACE('',(#159619),#159630,.F.); +#159619 = FACE_BOUND('',#159620,.F.); +#159620 = EDGE_LOOP('',(#159621,#159622,#159628,#159629)); +#159621 = ORIENTED_EDGE('',*,*,#158998,.F.); +#159622 = ORIENTED_EDGE('',*,*,#159623,.T.); +#159623 = EDGE_CURVE('',#158718,#158773,#159624,.T.); +#159624 = LINE('',#159625,#159626); +#159625 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#159626 = VECTOR('',#159627,1.); +#159627 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159628 = ORIENTED_EDGE('',*,*,#159251,.T.); +#159629 = ORIENTED_EDGE('',*,*,#159593,.F.); +#159630 = PLANE('',#159631); +#159631 = AXIS2_PLACEMENT_3D('',#159632,#159633,#159634); +#159632 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#159633 = DIRECTION('',(0.,0.,-1.)); +#159634 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159635 = ADVANCED_FACE('',(#159636),#159647,.T.); +#159636 = FACE_BOUND('',#159637,.T.); +#159637 = EDGE_LOOP('',(#159638,#159639,#159640,#159641)); +#159638 = ORIENTED_EDGE('',*,*,#159144,.T.); +#159639 = ORIENTED_EDGE('',*,*,#159623,.T.); +#159640 = ORIENTED_EDGE('',*,*,#159236,.F.); +#159641 = ORIENTED_EDGE('',*,*,#159642,.F.); +#159642 = EDGE_CURVE('',#159137,#159229,#159643,.T.); +#159643 = LINE('',#159644,#159645); +#159644 = CARTESIAN_POINT('',(-1.066657705663,-0.175,0.493202599087)); +#159645 = VECTOR('',#159646,1.); +#159646 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159647 = CYLINDRICAL_SURFACE('',#159648,0.22); +#159648 = AXIS2_PLACEMENT_3D('',#159649,#159650,#159651); +#159649 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#159650 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#159651 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#159652 = ADVANCED_FACE('',(#159653),#159664,.F.); +#159653 = FACE_BOUND('',#159654,.F.); +#159654 = EDGE_LOOP('',(#159655,#159661,#159662,#159663)); +#159655 = ORIENTED_EDGE('',*,*,#159656,.T.); +#159656 = EDGE_CURVE('',#159128,#159220,#159657,.T.); +#159657 = LINE('',#159658,#159659); +#159658 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#159659 = VECTOR('',#159660,1.); +#159660 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159661 = ORIENTED_EDGE('',*,*,#159228,.T.); +#159662 = ORIENTED_EDGE('',*,*,#159642,.F.); +#159663 = ORIENTED_EDGE('',*,*,#159136,.F.); +#159664 = PLANE('',#159665); +#159665 = AXIS2_PLACEMENT_3D('',#159666,#159667,#159668); +#159666 = CARTESIAN_POINT('',(-1.112500297756,-0.175,0.207844627563)); +#159667 = DIRECTION('',(0.987340403298,-1.096168048884E-16, + -0.158615661317)); +#159668 = DIRECTION('',(0.158615661317,-1.760987592604E-17, + 0.987340403298)); +#159669 = ADVANCED_FACE('',(#159670),#159681,.F.); +#159670 = FACE_BOUND('',#159671,.F.); +#159671 = EDGE_LOOP('',(#159672,#159678,#159679,#159680)); +#159672 = ORIENTED_EDGE('',*,*,#159673,.T.); +#159673 = EDGE_CURVE('',#159120,#159212,#159674,.T.); +#159674 = LINE('',#159675,#159676); +#159675 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.15)); +#159676 = VECTOR('',#159677,1.); +#159677 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159678 = ORIENTED_EDGE('',*,*,#159219,.T.); +#159679 = ORIENTED_EDGE('',*,*,#159656,.F.); +#159680 = ORIENTED_EDGE('',*,*,#159127,.F.); +#159681 = CYLINDRICAL_SURFACE('',#159682,7.E-02); +#159682 = AXIS2_PLACEMENT_3D('',#159683,#159684,#159685); +#159683 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#159684 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#159685 = DIRECTION('',(-0.,0.,-1.)); +#159686 = ADVANCED_FACE('',(#159687),#159698,.F.); +#159687 = FACE_BOUND('',#159688,.F.); +#159688 = EDGE_LOOP('',(#159689,#159695,#159696,#159697)); +#159689 = ORIENTED_EDGE('',*,*,#159690,.T.); +#159690 = EDGE_CURVE('',#159112,#159204,#159691,.T.); +#159691 = LINE('',#159692,#159693); +#159692 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#159693 = VECTOR('',#159694,1.); +#159694 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159695 = ORIENTED_EDGE('',*,*,#159211,.T.); +#159696 = ORIENTED_EDGE('',*,*,#159673,.F.); +#159697 = ORIENTED_EDGE('',*,*,#159119,.F.); +#159698 = PLANE('',#159699); +#159699 = AXIS2_PLACEMENT_3D('',#159700,#159701,#159702); +#159700 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#159701 = DIRECTION('',(0.,0.,-1.)); +#159702 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159703 = ADVANCED_FACE('',(#159704),#159715,.F.); +#159704 = FACE_BOUND('',#159705,.F.); +#159705 = EDGE_LOOP('',(#159706,#159712,#159713,#159714)); +#159706 = ORIENTED_EDGE('',*,*,#159707,.T.); +#159707 = EDGE_CURVE('',#159104,#159196,#159708,.T.); +#159708 = LINE('',#159709,#159710); +#159709 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#159710 = VECTOR('',#159711,1.); +#159711 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159712 = ORIENTED_EDGE('',*,*,#159203,.T.); +#159713 = ORIENTED_EDGE('',*,*,#159690,.F.); +#159714 = ORIENTED_EDGE('',*,*,#159111,.F.); +#159715 = PLANE('',#159716); +#159716 = AXIS2_PLACEMENT_3D('',#159717,#159718,#159719); +#159717 = CARTESIAN_POINT('',(-1.25,-0.175,-5.551115123126E-17)); +#159718 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#159719 = DIRECTION('',(0.,0.,1.)); +#159720 = ADVANCED_FACE('',(#159721),#159732,.F.); +#159721 = FACE_BOUND('',#159722,.F.); +#159722 = EDGE_LOOP('',(#159723,#159729,#159730,#159731)); +#159723 = ORIENTED_EDGE('',*,*,#159724,.T.); +#159724 = EDGE_CURVE('',#159095,#159187,#159725,.T.); +#159725 = LINE('',#159726,#159727); +#159726 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17 + )); +#159727 = VECTOR('',#159728,1.); +#159728 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#159729 = ORIENTED_EDGE('',*,*,#159195,.T.); +#159730 = ORIENTED_EDGE('',*,*,#159707,.F.); +#159731 = ORIENTED_EDGE('',*,*,#159103,.F.); +#159732 = PLANE('',#159733); +#159733 = AXIS2_PLACEMENT_3D('',#159734,#159735,#159736); +#159734 = CARTESIAN_POINT('',(-1.181436840466,-0.175,-5.551115123126E-17 + )); +#159735 = DIRECTION('',(0.,0.,1.)); +#159736 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#159737 = ADVANCED_FACE('',(#159738),#159744,.T.); +#159738 = FACE_BOUND('',#159739,.T.); +#159739 = EDGE_LOOP('',(#159740,#159741,#159742,#159743)); +#159740 = ORIENTED_EDGE('',*,*,#159094,.T.); +#159741 = ORIENTED_EDGE('',*,*,#159724,.T.); +#159742 = ORIENTED_EDGE('',*,*,#159186,.F.); +#159743 = ORIENTED_EDGE('',*,*,#159168,.F.); +#159744 = CYLINDRICAL_SURFACE('',#159745,0.22); +#159745 = AXIS2_PLACEMENT_3D('',#159746,#159747,#159748); +#159746 = CARTESIAN_POINT('',(-1.181436840466,-0.175,0.22)); +#159747 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#159748 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#159749 = ADVANCED_FACE('',(#159750),#159767,.F.); +#159750 = FACE_BOUND('',#159751,.F.); +#159751 = EDGE_LOOP('',(#159752,#159753,#159760,#159766)); +#159752 = ORIENTED_EDGE('',*,*,#159317,.T.); +#159753 = ORIENTED_EDGE('',*,*,#159754,.T.); +#159754 = EDGE_CURVE('',#159310,#159755,#159757,.T.); +#159755 = VERTEX_POINT('',#159756); +#159756 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#159757 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159758,#159759), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159758 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#159759 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#159760 = ORIENTED_EDGE('',*,*,#159761,.F.); +#159761 = EDGE_CURVE('',#159601,#159755,#159762,.T.); +#159762 = LINE('',#159763,#159764); +#159763 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#159764 = VECTOR('',#159765,1.); +#159765 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#159766 = ORIENTED_EDGE('',*,*,#159600,.F.); +#159767 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159768,#159769) + ,(#159770,#159771 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#159768 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#159769 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#159770 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#159771 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#159772 = ADVANCED_FACE('',(#159773),#159790,.F.); +#159773 = FACE_BOUND('',#159774,.F.); +#159774 = EDGE_LOOP('',(#159775,#159776,#159783,#159789)); +#159775 = ORIENTED_EDGE('',*,*,#159309,.T.); +#159776 = ORIENTED_EDGE('',*,*,#159777,.T.); +#159777 = EDGE_CURVE('',#159302,#159778,#159780,.T.); +#159778 = VERTEX_POINT('',#159779); +#159779 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#159780 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159781,#159782), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#159781 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#159782 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#159783 = ORIENTED_EDGE('',*,*,#159784,.F.); +#159784 = EDGE_CURVE('',#159755,#159778,#159785,.T.); +#159785 = LINE('',#159786,#159787); +#159786 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#159787 = VECTOR('',#159788,1.); +#159788 = DIRECTION('',(1.,0.,0.)); +#159789 = ORIENTED_EDGE('',*,*,#159754,.F.); +#159790 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159791,#159792) + ,(#159793,#159794 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#159791 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#159792 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#159793 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#159794 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#159795 = ADVANCED_FACE('',(#159796),#159807,.F.); +#159796 = FACE_BOUND('',#159797,.F.); +#159797 = EDGE_LOOP('',(#159798,#159799,#159800,#159806)); +#159798 = ORIENTED_EDGE('',*,*,#159301,.T.); +#159799 = ORIENTED_EDGE('',*,*,#159510,.T.); +#159800 = ORIENTED_EDGE('',*,*,#159801,.F.); +#159801 = EDGE_CURVE('',#159778,#159503,#159802,.T.); +#159802 = LINE('',#159803,#159804); +#159803 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#159804 = VECTOR('',#159805,1.); +#159805 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#159806 = ORIENTED_EDGE('',*,*,#159777,.F.); +#159807 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#159808,#159809) + ,(#159810,#159811 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#159808 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#159809 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#159810 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#159811 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#159812 = ADVANCED_FACE('',(#159813),#159882,.F.); +#159813 = FACE_BOUND('',#159814,.F.); +#159814 = EDGE_LOOP('',(#159815,#159816,#159817,#159825,#159834,#159842, + #159850,#159858,#159867,#159875)); +#159815 = ORIENTED_EDGE('',*,*,#159405,.F.); +#159816 = ORIENTED_EDGE('',*,*,#159438,.T.); +#159817 = ORIENTED_EDGE('',*,*,#159818,.T.); +#159818 = EDGE_CURVE('',#159431,#159819,#159821,.T.); +#159819 = VERTEX_POINT('',#159820); +#159820 = CARTESIAN_POINT('',(0.964779134804,0.175,0.181797400913)); +#159821 = LINE('',#159822,#159823); +#159822 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#159823 = VECTOR('',#159824,1.); +#159824 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#159825 = ORIENTED_EDGE('',*,*,#159826,.T.); +#159826 = EDGE_CURVE('',#159819,#159827,#159829,.T.); +#159827 = VERTEX_POINT('',#159828); +#159828 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17) + ); +#159829 = CIRCLE('',#159830,0.22); +#159830 = AXIS2_PLACEMENT_3D('',#159831,#159832,#159833); +#159831 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#159832 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#159833 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#159834 = ORIENTED_EDGE('',*,*,#159835,.T.); +#159835 = EDGE_CURVE('',#159827,#159836,#159838,.T.); +#159836 = VERTEX_POINT('',#159837); +#159837 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#159838 = LINE('',#159839,#159840); +#159839 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17) + ); +#159840 = VECTOR('',#159841,1.); +#159841 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#159842 = ORIENTED_EDGE('',*,*,#159843,.T.); +#159843 = EDGE_CURVE('',#159836,#159844,#159846,.T.); +#159844 = VERTEX_POINT('',#159845); +#159845 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#159846 = LINE('',#159847,#159848); +#159847 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#159848 = VECTOR('',#159849,1.); +#159849 = DIRECTION('',(0.,0.,1.)); +#159850 = ORIENTED_EDGE('',*,*,#159851,.T.); +#159851 = EDGE_CURVE('',#159844,#159852,#159854,.T.); +#159852 = VERTEX_POINT('',#159853); +#159853 = CARTESIAN_POINT('',(1.181436840466,0.175,0.15)); +#159854 = LINE('',#159855,#159856); +#159855 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#159856 = VECTOR('',#159857,1.); +#159857 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#159858 = ORIENTED_EDGE('',*,*,#159859,.T.); +#159859 = EDGE_CURVE('',#159852,#159860,#159862,.T.); +#159860 = VERTEX_POINT('',#159861); +#159861 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#159862 = CIRCLE('',#159863,7.E-02); +#159863 = AXIS2_PLACEMENT_3D('',#159864,#159865,#159866); +#159864 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#159865 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#159866 = DIRECTION('',(0.,0.,-1.)); +#159867 = ORIENTED_EDGE('',*,*,#159868,.T.); +#159868 = EDGE_CURVE('',#159860,#159869,#159871,.T.); +#159869 = VERTEX_POINT('',#159870); +#159870 = CARTESIAN_POINT('',(1.066657705663,0.175,0.493202599087)); +#159871 = LINE('',#159872,#159873); +#159872 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#159873 = VECTOR('',#159874,1.); +#159874 = DIRECTION('',(-0.158615661317,3.521975185208E-17, + 0.987340403298)); +#159875 = ORIENTED_EDGE('',*,*,#159876,.T.); +#159876 = EDGE_CURVE('',#159869,#159278,#159877,.T.); +#159877 = CIRCLE('',#159878,0.22); +#159878 = AXIS2_PLACEMENT_3D('',#159879,#159880,#159881); +#159879 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#159880 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#159881 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#159882 = PLANE('',#159883); +#159883 = AXIS2_PLACEMENT_3D('',#159884,#159885,#159886); +#159884 = CARTESIAN_POINT('',(1.021526355437,0.175,0.332418056697)); +#159885 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159886 = DIRECTION('',(0.,0.,1.)); +#159887 = ADVANCED_FACE('',(#159888),#159906,.F.); +#159888 = FACE_BOUND('',#159889,.F.); +#159889 = EDGE_LOOP('',(#159890,#159891,#159899,#159905)); +#159890 = ORIENTED_EDGE('',*,*,#159430,.T.); +#159891 = ORIENTED_EDGE('',*,*,#159892,.T.); +#159892 = EDGE_CURVE('',#159422,#159893,#159895,.T.); +#159893 = VERTEX_POINT('',#159894); +#159894 = CARTESIAN_POINT('',(0.964779134804,-0.175,0.181797400913)); +#159895 = LINE('',#159896,#159897); +#159896 = CARTESIAN_POINT('',(0.918936542711,-0.175,0.467155372437)); +#159897 = VECTOR('',#159898,1.); +#159898 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#159899 = ORIENTED_EDGE('',*,*,#159900,.F.); +#159900 = EDGE_CURVE('',#159819,#159893,#159901,.T.); +#159901 = LINE('',#159902,#159903); +#159902 = CARTESIAN_POINT('',(0.964779134804,0.175,0.181797400913)); +#159903 = VECTOR('',#159904,1.); +#159904 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159905 = ORIENTED_EDGE('',*,*,#159818,.F.); +#159906 = PLANE('',#159907); +#159907 = AXIS2_PLACEMENT_3D('',#159908,#159909,#159910); +#159908 = CARTESIAN_POINT('',(0.918936542711,0.175,0.467155372437)); +#159909 = DIRECTION('',(0.987340403298,-2.192336097769E-16, + 0.158615661317)); +#159910 = DIRECTION('',(0.158615661317,-3.521975185208E-17, + -0.987340403298)); +#159911 = ADVANCED_FACE('',(#159912),#159974,.T.); +#159912 = FACE_BOUND('',#159913,.T.); +#159913 = EDGE_LOOP('',(#159914,#159915,#159916,#159917,#159926,#159934, + #159942,#159950,#159959,#159967)); +#159914 = ORIENTED_EDGE('',*,*,#159453,.F.); +#159915 = ORIENTED_EDGE('',*,*,#159421,.T.); +#159916 = ORIENTED_EDGE('',*,*,#159892,.T.); +#159917 = ORIENTED_EDGE('',*,*,#159918,.T.); +#159918 = EDGE_CURVE('',#159893,#159919,#159921,.T.); +#159919 = VERTEX_POINT('',#159920); +#159920 = CARTESIAN_POINT('',(1.181436840466,-0.175,-5.551115123126E-17) + ); +#159921 = CIRCLE('',#159922,0.22); +#159922 = AXIS2_PLACEMENT_3D('',#159923,#159924,#159925); +#159923 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.22)); +#159924 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#159925 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#159926 = ORIENTED_EDGE('',*,*,#159927,.T.); +#159927 = EDGE_CURVE('',#159919,#159928,#159930,.T.); +#159928 = VERTEX_POINT('',#159929); +#159929 = CARTESIAN_POINT('',(1.25,-0.175,-5.551115123126E-17)); +#159930 = LINE('',#159931,#159932); +#159931 = CARTESIAN_POINT('',(1.181436840466,-0.175,-5.551115123126E-17) + ); +#159932 = VECTOR('',#159933,1.); +#159933 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#159934 = ORIENTED_EDGE('',*,*,#159935,.T.); +#159935 = EDGE_CURVE('',#159928,#159936,#159938,.T.); +#159936 = VERTEX_POINT('',#159937); +#159937 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#159938 = LINE('',#159939,#159940); +#159939 = CARTESIAN_POINT('',(1.25,-0.175,-5.551115123126E-17)); +#159940 = VECTOR('',#159941,1.); +#159941 = DIRECTION('',(0.,0.,1.)); +#159942 = ORIENTED_EDGE('',*,*,#159943,.T.); +#159943 = EDGE_CURVE('',#159936,#159944,#159946,.T.); +#159944 = VERTEX_POINT('',#159945); +#159945 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.15)); +#159946 = LINE('',#159947,#159948); +#159947 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#159948 = VECTOR('',#159949,1.); +#159949 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#159950 = ORIENTED_EDGE('',*,*,#159951,.T.); +#159951 = EDGE_CURVE('',#159944,#159952,#159954,.T.); +#159952 = VERTEX_POINT('',#159953); +#159953 = CARTESIAN_POINT('',(1.112500297756,-0.175,0.207844627563)); +#159954 = CIRCLE('',#159955,7.E-02); +#159955 = AXIS2_PLACEMENT_3D('',#159956,#159957,#159958); +#159956 = CARTESIAN_POINT('',(1.181436840466,-0.175,0.22)); +#159957 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#159958 = DIRECTION('',(0.,0.,-1.)); +#159959 = ORIENTED_EDGE('',*,*,#159960,.T.); +#159960 = EDGE_CURVE('',#159952,#159961,#159963,.T.); +#159961 = VERTEX_POINT('',#159962); +#159962 = CARTESIAN_POINT('',(1.066657705663,-0.175,0.493202599087)); +#159963 = LINE('',#159964,#159965); +#159964 = CARTESIAN_POINT('',(1.112500297756,-0.175,0.207844627563)); +#159965 = VECTOR('',#159966,1.); +#159966 = DIRECTION('',(-0.158615661317,3.521975185208E-17, + 0.987340403298)); +#159967 = ORIENTED_EDGE('',*,*,#159968,.T.); +#159968 = EDGE_CURVE('',#159961,#159047,#159969,.T.); +#159969 = CIRCLE('',#159970,0.22); +#159970 = AXIS2_PLACEMENT_3D('',#159971,#159972,#159973); +#159971 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#159972 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#159973 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#159974 = PLANE('',#159975); +#159975 = AXIS2_PLACEMENT_3D('',#159976,#159977,#159978); +#159976 = CARTESIAN_POINT('',(1.021526355437,-0.175,0.332418056697)); +#159977 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159978 = DIRECTION('',(0.,0.,1.)); +#159979 = ADVANCED_FACE('',(#159980),#159991,.T.); +#159980 = FACE_BOUND('',#159981,.T.); +#159981 = EDGE_LOOP('',(#159982,#159983,#159984,#159985)); +#159982 = ORIENTED_EDGE('',*,*,#159876,.T.); +#159983 = ORIENTED_EDGE('',*,*,#159471,.T.); +#159984 = ORIENTED_EDGE('',*,*,#159968,.F.); +#159985 = ORIENTED_EDGE('',*,*,#159986,.F.); +#159986 = EDGE_CURVE('',#159869,#159961,#159987,.T.); +#159987 = LINE('',#159988,#159989); +#159988 = CARTESIAN_POINT('',(1.066657705663,0.175,0.493202599087)); +#159989 = VECTOR('',#159990,1.); +#159990 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#159991 = CYLINDRICAL_SURFACE('',#159992,0.22); +#159992 = AXIS2_PLACEMENT_3D('',#159993,#159994,#159995); +#159993 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#159994 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#159995 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#159996 = ADVANCED_FACE('',(#159997,#160007),#160041,.T.); +#159997 = FACE_BOUND('',#159998,.T.); +#159998 = EDGE_LOOP('',(#159999,#160000,#160001,#160002,#160003,#160004, + #160005,#160006)); +#159999 = ORIENTED_EDGE('',*,*,#159607,.F.); +#160000 = ORIENTED_EDGE('',*,*,#159577,.F.); +#160001 = ORIENTED_EDGE('',*,*,#159554,.F.); +#160002 = ORIENTED_EDGE('',*,*,#159531,.F.); +#160003 = ORIENTED_EDGE('',*,*,#159502,.F.); +#160004 = ORIENTED_EDGE('',*,*,#159801,.F.); +#160005 = ORIENTED_EDGE('',*,*,#159784,.F.); +#160006 = ORIENTED_EDGE('',*,*,#159761,.F.); +#160007 = FACE_BOUND('',#160008,.T.); +#160008 = EDGE_LOOP('',(#160009,#160019,#160027,#160035)); +#160009 = ORIENTED_EDGE('',*,*,#160010,.T.); +#160010 = EDGE_CURVE('',#160011,#160013,#160015,.T.); +#160011 = VERTEX_POINT('',#160012); +#160012 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.1)); +#160013 = VERTEX_POINT('',#160014); +#160014 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.1)); +#160015 = LINE('',#160016,#160017); +#160016 = CARTESIAN_POINT('',(-0.740270145251,-0.490270145251,1.1)); +#160017 = VECTOR('',#160018,1.); +#160018 = DIRECTION('',(-1.,0.,0.)); +#160019 = ORIENTED_EDGE('',*,*,#160020,.T.); +#160020 = EDGE_CURVE('',#160013,#160021,#160023,.T.); +#160021 = VERTEX_POINT('',#160022); +#160022 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.1)); +#160023 = LINE('',#160024,#160025); +#160024 = CARTESIAN_POINT('',(-0.715270145251,-0.488952608939,1.1)); +#160025 = VECTOR('',#160026,1.); +#160026 = DIRECTION('',(0.,1.,0.)); +#160027 = ORIENTED_EDGE('',*,*,#160028,.F.); +#160028 = EDGE_CURVE('',#160029,#160021,#160031,.T.); +#160029 = VERTEX_POINT('',#160030); +#160030 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.1)); +#160031 = LINE('',#160032,#160033); +#160032 = CARTESIAN_POINT('',(-0.740270145251,0.490270145251,1.1)); +#160033 = VECTOR('',#160034,1.); +#160034 = DIRECTION('',(-1.,0.,0.)); +#160035 = ORIENTED_EDGE('',*,*,#160036,.F.); +#160036 = EDGE_CURVE('',#160011,#160029,#160037,.T.); +#160037 = LINE('',#160038,#160039); +#160038 = CARTESIAN_POINT('',(-0.315270145251,-0.488952608939,1.1)); +#160039 = VECTOR('',#160040,1.); +#160040 = DIRECTION('',(0.,1.,0.)); +#160041 = PLANE('',#160042); +#160042 = AXIS2_PLACEMENT_3D('',#160043,#160044,#160045); +#160043 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#160044 = DIRECTION('',(0.,0.,1.)); +#160045 = DIRECTION('',(0.84333939541,0.537381302382,-0.)); +#160046 = ADVANCED_FACE('',(#160047),#160058,.F.); +#160047 = FACE_BOUND('',#160048,.F.); +#160048 = EDGE_LOOP('',(#160049,#160055,#160056,#160057)); +#160049 = ORIENTED_EDGE('',*,*,#160050,.T.); +#160050 = EDGE_CURVE('',#159860,#159952,#160051,.T.); +#160051 = LINE('',#160052,#160053); +#160052 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#160053 = VECTOR('',#160054,1.); +#160054 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#160055 = ORIENTED_EDGE('',*,*,#159960,.T.); +#160056 = ORIENTED_EDGE('',*,*,#159986,.F.); +#160057 = ORIENTED_EDGE('',*,*,#159868,.F.); +#160058 = PLANE('',#160059); +#160059 = AXIS2_PLACEMENT_3D('',#160060,#160061,#160062); +#160060 = CARTESIAN_POINT('',(1.112500297756,0.175,0.207844627563)); +#160061 = DIRECTION('',(-0.987340403298,2.192336097769E-16, + -0.158615661317)); +#160062 = DIRECTION('',(-0.158615661317,3.521975185208E-17, + 0.987340403298)); +#160063 = ADVANCED_FACE('',(#160064),#160075,.F.); +#160064 = FACE_BOUND('',#160065,.F.); +#160065 = EDGE_LOOP('',(#160066,#160072,#160073,#160074)); +#160066 = ORIENTED_EDGE('',*,*,#160067,.T.); +#160067 = EDGE_CURVE('',#159852,#159944,#160068,.T.); +#160068 = LINE('',#160069,#160070); +#160069 = CARTESIAN_POINT('',(1.181436840466,0.175,0.15)); +#160070 = VECTOR('',#160071,1.); +#160071 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#160072 = ORIENTED_EDGE('',*,*,#159951,.T.); +#160073 = ORIENTED_EDGE('',*,*,#160050,.F.); +#160074 = ORIENTED_EDGE('',*,*,#159859,.F.); +#160075 = CYLINDRICAL_SURFACE('',#160076,7.E-02); +#160076 = AXIS2_PLACEMENT_3D('',#160077,#160078,#160079); +#160077 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#160078 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#160079 = DIRECTION('',(0.,0.,-1.)); +#160080 = ADVANCED_FACE('',(#160081),#160092,.F.); +#160081 = FACE_BOUND('',#160082,.F.); +#160082 = EDGE_LOOP('',(#160083,#160089,#160090,#160091)); +#160083 = ORIENTED_EDGE('',*,*,#160084,.T.); +#160084 = EDGE_CURVE('',#159844,#159936,#160085,.T.); +#160085 = LINE('',#160086,#160087); +#160086 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#160087 = VECTOR('',#160088,1.); +#160088 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#160089 = ORIENTED_EDGE('',*,*,#159943,.T.); +#160090 = ORIENTED_EDGE('',*,*,#160067,.F.); +#160091 = ORIENTED_EDGE('',*,*,#159851,.F.); +#160092 = PLANE('',#160093); +#160093 = AXIS2_PLACEMENT_3D('',#160094,#160095,#160096); +#160094 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#160095 = DIRECTION('',(0.,0.,-1.)); +#160096 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#160097 = ADVANCED_FACE('',(#160098),#160109,.F.); +#160098 = FACE_BOUND('',#160099,.F.); +#160099 = EDGE_LOOP('',(#160100,#160106,#160107,#160108)); +#160100 = ORIENTED_EDGE('',*,*,#160101,.T.); +#160101 = EDGE_CURVE('',#159836,#159928,#160102,.T.); +#160102 = LINE('',#160103,#160104); +#160103 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#160104 = VECTOR('',#160105,1.); +#160105 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#160106 = ORIENTED_EDGE('',*,*,#159935,.T.); +#160107 = ORIENTED_EDGE('',*,*,#160084,.F.); +#160108 = ORIENTED_EDGE('',*,*,#159843,.F.); +#160109 = PLANE('',#160110); +#160110 = AXIS2_PLACEMENT_3D('',#160111,#160112,#160113); +#160111 = CARTESIAN_POINT('',(1.25,0.175,-5.551115123126E-17)); +#160112 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#160113 = DIRECTION('',(0.,0.,1.)); +#160114 = ADVANCED_FACE('',(#160115),#160126,.F.); +#160115 = FACE_BOUND('',#160116,.F.); +#160116 = EDGE_LOOP('',(#160117,#160123,#160124,#160125)); +#160117 = ORIENTED_EDGE('',*,*,#160118,.T.); +#160118 = EDGE_CURVE('',#159827,#159919,#160119,.T.); +#160119 = LINE('',#160120,#160121); +#160120 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17) + ); +#160121 = VECTOR('',#160122,1.); +#160122 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#160123 = ORIENTED_EDGE('',*,*,#159927,.T.); +#160124 = ORIENTED_EDGE('',*,*,#160101,.F.); +#160125 = ORIENTED_EDGE('',*,*,#159835,.F.); +#160126 = PLANE('',#160127); +#160127 = AXIS2_PLACEMENT_3D('',#160128,#160129,#160130); +#160128 = CARTESIAN_POINT('',(1.181436840466,0.175,-5.551115123126E-17) + ); +#160129 = DIRECTION('',(0.,0.,1.)); +#160130 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#160131 = ADVANCED_FACE('',(#160132),#160138,.T.); +#160132 = FACE_BOUND('',#160133,.T.); +#160133 = EDGE_LOOP('',(#160134,#160135,#160136,#160137)); +#160134 = ORIENTED_EDGE('',*,*,#159826,.T.); +#160135 = ORIENTED_EDGE('',*,*,#160118,.T.); +#160136 = ORIENTED_EDGE('',*,*,#159918,.F.); +#160137 = ORIENTED_EDGE('',*,*,#159900,.F.); +#160138 = CYLINDRICAL_SURFACE('',#160139,0.22); +#160139 = AXIS2_PLACEMENT_3D('',#160140,#160141,#160142); +#160140 = CARTESIAN_POINT('',(1.181436840466,0.175,0.22)); +#160141 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#160142 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#160143 = ADVANCED_FACE('',(#160144),#160169,.F.); +#160144 = FACE_BOUND('',#160145,.F.); +#160145 = EDGE_LOOP('',(#160146,#160147,#160155,#160163)); +#160146 = ORIENTED_EDGE('',*,*,#160010,.T.); +#160147 = ORIENTED_EDGE('',*,*,#160148,.T.); +#160148 = EDGE_CURVE('',#160013,#160149,#160151,.T.); +#160149 = VERTEX_POINT('',#160150); +#160150 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#160151 = LINE('',#160152,#160153); +#160152 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#160153 = VECTOR('',#160154,1.); +#160154 = DIRECTION('',(0.,0.,1.)); +#160155 = ORIENTED_EDGE('',*,*,#160156,.T.); +#160156 = EDGE_CURVE('',#160149,#160157,#160159,.T.); +#160157 = VERTEX_POINT('',#160158); +#160158 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.11)); +#160159 = LINE('',#160160,#160161); +#160160 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#160161 = VECTOR('',#160162,1.); +#160162 = DIRECTION('',(1.,0.,0.)); +#160163 = ORIENTED_EDGE('',*,*,#160164,.F.); +#160164 = EDGE_CURVE('',#160011,#160157,#160165,.T.); +#160165 = LINE('',#160166,#160167); +#160166 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#160167 = VECTOR('',#160168,1.); +#160168 = DIRECTION('',(0.,0.,1.)); +#160169 = PLANE('',#160170); +#160170 = AXIS2_PLACEMENT_3D('',#160171,#160172,#160173); +#160171 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#160172 = DIRECTION('',(0.,1.,0.)); +#160173 = DIRECTION('',(0.,-0.,1.)); +#160174 = ADVANCED_FACE('',(#160175),#160193,.T.); +#160175 = FACE_BOUND('',#160176,.T.); +#160176 = EDGE_LOOP('',(#160177,#160178,#160179,#160187)); +#160177 = ORIENTED_EDGE('',*,*,#160164,.F.); +#160178 = ORIENTED_EDGE('',*,*,#160036,.T.); +#160179 = ORIENTED_EDGE('',*,*,#160180,.T.); +#160180 = EDGE_CURVE('',#160029,#160181,#160183,.T.); +#160181 = VERTEX_POINT('',#160182); +#160182 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.11)); +#160183 = LINE('',#160184,#160185); +#160184 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.09)); +#160185 = VECTOR('',#160186,1.); +#160186 = DIRECTION('',(0.,0.,1.)); +#160187 = ORIENTED_EDGE('',*,*,#160188,.F.); +#160188 = EDGE_CURVE('',#160157,#160181,#160189,.T.); +#160189 = LINE('',#160190,#160191); +#160190 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.11)); +#160191 = VECTOR('',#160192,1.); +#160192 = DIRECTION('',(0.,1.,0.)); +#160193 = PLANE('',#160194); +#160194 = AXIS2_PLACEMENT_3D('',#160195,#160196,#160197); +#160195 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#160196 = DIRECTION('',(1.,0.,0.)); +#160197 = DIRECTION('',(0.,0.,1.)); +#160198 = ADVANCED_FACE('',(#160199),#160217,.T.); +#160199 = FACE_BOUND('',#160200,.T.); +#160200 = EDGE_LOOP('',(#160201,#160202,#160210,#160216)); +#160201 = ORIENTED_EDGE('',*,*,#160028,.T.); +#160202 = ORIENTED_EDGE('',*,*,#160203,.T.); +#160203 = EDGE_CURVE('',#160021,#160204,#160206,.T.); +#160204 = VERTEX_POINT('',#160205); +#160205 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.11)); +#160206 = LINE('',#160207,#160208); +#160207 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#160208 = VECTOR('',#160209,1.); +#160209 = DIRECTION('',(0.,0.,1.)); +#160210 = ORIENTED_EDGE('',*,*,#160211,.T.); +#160211 = EDGE_CURVE('',#160204,#160181,#160212,.T.); +#160212 = LINE('',#160213,#160214); +#160213 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.11)); +#160214 = VECTOR('',#160215,1.); +#160215 = DIRECTION('',(1.,0.,0.)); +#160216 = ORIENTED_EDGE('',*,*,#160180,.F.); +#160217 = PLANE('',#160218); +#160218 = AXIS2_PLACEMENT_3D('',#160219,#160220,#160221); +#160219 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#160220 = DIRECTION('',(0.,1.,0.)); +#160221 = DIRECTION('',(0.,-0.,1.)); +#160222 = ADVANCED_FACE('',(#160223),#160234,.F.); +#160223 = FACE_BOUND('',#160224,.F.); +#160224 = EDGE_LOOP('',(#160225,#160226,#160227,#160228)); +#160225 = ORIENTED_EDGE('',*,*,#160148,.F.); +#160226 = ORIENTED_EDGE('',*,*,#160020,.T.); +#160227 = ORIENTED_EDGE('',*,*,#160203,.T.); +#160228 = ORIENTED_EDGE('',*,*,#160229,.F.); +#160229 = EDGE_CURVE('',#160149,#160204,#160230,.T.); +#160230 = LINE('',#160231,#160232); +#160231 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#160232 = VECTOR('',#160233,1.); +#160233 = DIRECTION('',(0.,1.,0.)); +#160234 = PLANE('',#160235); +#160235 = AXIS2_PLACEMENT_3D('',#160236,#160237,#160238); +#160236 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#160237 = DIRECTION('',(1.,0.,0.)); +#160238 = DIRECTION('',(0.,0.,1.)); +#160239 = ADVANCED_FACE('',(#160240),#160246,.T.); +#160240 = FACE_BOUND('',#160241,.T.); +#160241 = EDGE_LOOP('',(#160242,#160243,#160244,#160245)); +#160242 = ORIENTED_EDGE('',*,*,#160229,.F.); +#160243 = ORIENTED_EDGE('',*,*,#160156,.T.); +#160244 = ORIENTED_EDGE('',*,*,#160188,.T.); +#160245 = ORIENTED_EDGE('',*,*,#160211,.F.); +#160246 = PLANE('',#160247); +#160247 = AXIS2_PLACEMENT_3D('',#160248,#160249,#160250); +#160248 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.11)); +#160249 = DIRECTION('',(0.,0.,1.)); +#160250 = DIRECTION('',(1.,0.,-0.)); +#160251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#160255)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#160252,#160253,#160254)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#160252 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#160253 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#160254 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#160255 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#160252, + 'distance_accuracy_value','confusion accuracy'); +#160256 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#160257,#160259); +#160257 = ( REPRESENTATION_RELATIONSHIP('','',#158562,#158539) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#160258) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#160258 = ITEM_DEFINED_TRANSFORMATION('','',#11,#158540); +#160259 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #160260); +#160260 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('69','=>[0:1:1:36]','',#158534, + #158557,$); +#160261 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#158559)); +#160262 = SHAPE_DEFINITION_REPRESENTATION(#160263,#160269); +#160263 = PRODUCT_DEFINITION_SHAPE('','',#160264); +#160264 = PRODUCT_DEFINITION('design','',#160265,#160268); +#160265 = PRODUCT_DEFINITION_FORMATION('','',#160266); +#160266 = PRODUCT('JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal', + 'JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal','',(#160267)); +#160267 = PRODUCT_CONTEXT('',#2,'mechanical'); +#160268 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#160269 = SHAPE_REPRESENTATION('',(#11,#160270),#160274); +#160270 = AXIS2_PLACEMENT_3D('',#160271,#160272,#160273); +#160271 = CARTESIAN_POINT('',(0.,0.,0.)); +#160272 = DIRECTION('',(0.,0.,1.)); +#160273 = DIRECTION('',(1.,0.,-0.)); +#160274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#160278)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#160275,#160276,#160277)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#160275 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#160276 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#160277 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#160278 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#160275, + 'distance_accuracy_value','confusion accuracy'); +#160279 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#160280,#160282); +#160280 = ( REPRESENTATION_RELATIONSHIP('','',#160269,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#160281) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#160281 = ITEM_DEFINED_TRANSFORMATION('','',#11,#219); +#160282 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #160283); +#160283 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('72','BT1','',#5,#160264,$); +#160284 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#160266)); +#160285 = SHAPE_DEFINITION_REPRESENTATION(#160286,#160292); +#160286 = PRODUCT_DEFINITION_SHAPE('','',#160287); +#160287 = PRODUCT_DEFINITION('design','',#160288,#160291); +#160288 = PRODUCT_DEFINITION_FORMATION('','',#160289); +#160289 = PRODUCT('JST_S2B_PH_K','JST_S2B_PH_K','',(#160290)); +#160290 = PRODUCT_CONTEXT('',#2,'mechanical'); +#160291 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#160292 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#160293),#163787); +#160293 = MANIFOLD_SOLID_BREP('',#160294); +#160294 = CLOSED_SHELL('',(#160295,#160335,#160415,#160503,#160560, + #160577,#160601,#160625,#160649,#160705,#160841,#160872,#160884, + #160970,#160984,#161040,#161097,#161121,#161194,#161218,#161251, + #161362,#161479,#161519,#161550,#161568,#161585,#161603,#161629, + #161660,#161677,#161710,#161750,#161773,#161822,#161846,#161893, + #161910,#161927,#161939,#161986,#162017,#162034,#162051,#162075, + #162099,#162116,#162133,#162145,#162162,#162174,#162198,#162216, + #162228,#162242,#162273,#162297,#162321,#162338,#162369,#162393, + #162417,#162434,#162480,#162526,#162543,#162555,#162586,#162610, + #162634,#162651,#162682,#162706,#162730,#162747,#162844,#162868, + #162958,#162975,#163072,#163096,#163186,#163203,#163215,#163227, + #163244,#163261,#163278,#163311,#163351,#163382,#163399,#163416, + #163428,#163461,#163478,#163495,#163512,#163545,#163585,#163616, + #163633,#163650,#163662,#163695,#163712,#163729,#163741,#163758, + #163775)); +#160295 = ADVANCED_FACE('',(#160296),#160330,.T.); +#160296 = FACE_BOUND('',#160297,.T.); +#160297 = EDGE_LOOP('',(#160298,#160308,#160316,#160324)); +#160298 = ORIENTED_EDGE('',*,*,#160299,.F.); +#160299 = EDGE_CURVE('',#160300,#160302,#160304,.T.); +#160300 = VERTEX_POINT('',#160301); +#160301 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#160302 = VERTEX_POINT('',#160303); +#160303 = CARTESIAN_POINT('',(3.95,-6.25,2.5)); +#160304 = LINE('',#160305,#160306); +#160305 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#160306 = VECTOR('',#160307,1.); +#160307 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160308 = ORIENTED_EDGE('',*,*,#160309,.T.); +#160309 = EDGE_CURVE('',#160300,#160310,#160312,.T.); +#160310 = VERTEX_POINT('',#160311); +#160311 = CARTESIAN_POINT('',(3.45,-4.65,2.5)); +#160312 = LINE('',#160313,#160314); +#160313 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#160314 = VECTOR('',#160315,1.); +#160315 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160316 = ORIENTED_EDGE('',*,*,#160317,.T.); +#160317 = EDGE_CURVE('',#160310,#160318,#160320,.T.); +#160318 = VERTEX_POINT('',#160319); +#160319 = CARTESIAN_POINT('',(3.45,-6.25,2.5)); +#160320 = LINE('',#160321,#160322); +#160321 = CARTESIAN_POINT('',(3.45,-5.45,2.5)); +#160322 = VECTOR('',#160323,1.); +#160323 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160324 = ORIENTED_EDGE('',*,*,#160325,.F.); +#160325 = EDGE_CURVE('',#160302,#160318,#160326,.T.); +#160326 = LINE('',#160327,#160328); +#160327 = CARTESIAN_POINT('',(3.95,-6.25,2.5)); +#160328 = VECTOR('',#160329,1.); +#160329 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160330 = PLANE('',#160331); +#160331 = AXIS2_PLACEMENT_3D('',#160332,#160333,#160334); +#160332 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#160333 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160334 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160335 = ADVANCED_FACE('',(#160336),#160410,.T.); +#160336 = FACE_BOUND('',#160337,.T.); +#160337 = EDGE_LOOP('',(#160338,#160346,#160354,#160362,#160370,#160378, + #160386,#160394,#160402,#160409)); +#160338 = ORIENTED_EDGE('',*,*,#160339,.F.); +#160339 = EDGE_CURVE('',#160340,#160302,#160342,.T.); +#160340 = VERTEX_POINT('',#160341); +#160341 = CARTESIAN_POINT('',(3.95,-6.25,0.)); +#160342 = LINE('',#160343,#160344); +#160343 = CARTESIAN_POINT('',(3.95,-6.25,0.3)); +#160344 = VECTOR('',#160345,1.); +#160345 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160346 = ORIENTED_EDGE('',*,*,#160347,.F.); +#160347 = EDGE_CURVE('',#160348,#160340,#160350,.T.); +#160348 = VERTEX_POINT('',#160349); +#160349 = CARTESIAN_POINT('',(3.95,1.35,0.)); +#160350 = LINE('',#160351,#160352); +#160351 = CARTESIAN_POINT('',(3.95,1.35,0.)); +#160352 = VECTOR('',#160353,1.); +#160353 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#160354 = ORIENTED_EDGE('',*,*,#160355,.F.); +#160355 = EDGE_CURVE('',#160356,#160348,#160358,.T.); +#160356 = VERTEX_POINT('',#160357); +#160357 = CARTESIAN_POINT('',(3.95,1.35,3.2)); +#160358 = LINE('',#160359,#160360); +#160359 = CARTESIAN_POINT('',(3.95,1.35,3.2)); +#160360 = VECTOR('',#160361,1.); +#160361 = DIRECTION('',(-0.,0.,-1.)); +#160362 = ORIENTED_EDGE('',*,*,#160363,.F.); +#160363 = EDGE_CURVE('',#160364,#160356,#160366,.T.); +#160364 = VERTEX_POINT('',#160365); +#160365 = CARTESIAN_POINT('',(3.95,-0.25,4.1)); +#160366 = LINE('',#160367,#160368); +#160367 = CARTESIAN_POINT('',(3.95,-0.25,4.1)); +#160368 = VECTOR('',#160369,1.); +#160369 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#160370 = ORIENTED_EDGE('',*,*,#160371,.T.); +#160371 = EDGE_CURVE('',#160364,#160372,#160374,.T.); +#160372 = VERTEX_POINT('',#160373); +#160373 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#160374 = LINE('',#160375,#160376); +#160375 = CARTESIAN_POINT('',(3.95,-0.25,0.3)); +#160376 = VECTOR('',#160377,1.); +#160377 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160378 = ORIENTED_EDGE('',*,*,#160379,.T.); +#160379 = EDGE_CURVE('',#160372,#160380,#160382,.T.); +#160380 = VERTEX_POINT('',#160381); +#160381 = CARTESIAN_POINT('',(3.95,-6.25,4.8)); +#160382 = LINE('',#160383,#160384); +#160383 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#160384 = VECTOR('',#160385,1.); +#160385 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160386 = ORIENTED_EDGE('',*,*,#160387,.F.); +#160387 = EDGE_CURVE('',#160388,#160380,#160390,.T.); +#160388 = VERTEX_POINT('',#160389); +#160389 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#160390 = LINE('',#160391,#160392); +#160391 = CARTESIAN_POINT('',(3.95,-6.25,0.3)); +#160392 = VECTOR('',#160393,1.); +#160393 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160394 = ORIENTED_EDGE('',*,*,#160395,.T.); +#160395 = EDGE_CURVE('',#160388,#160396,#160398,.T.); +#160396 = VERTEX_POINT('',#160397); +#160397 = CARTESIAN_POINT('',(3.95,-4.65,3.3)); +#160398 = LINE('',#160399,#160400); +#160399 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#160400 = VECTOR('',#160401,1.); +#160401 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160402 = ORIENTED_EDGE('',*,*,#160403,.T.); +#160403 = EDGE_CURVE('',#160396,#160300,#160404,.T.); +#160404 = CIRCLE('',#160405,0.4); +#160405 = AXIS2_PLACEMENT_3D('',#160406,#160407,#160408); +#160406 = CARTESIAN_POINT('',(3.95,-4.65,2.9)); +#160407 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160408 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#160409 = ORIENTED_EDGE('',*,*,#160299,.T.); +#160410 = PLANE('',#160411); +#160411 = AXIS2_PLACEMENT_3D('',#160412,#160413,#160414); +#160412 = CARTESIAN_POINT('',(3.95,-2.909897467985,2.368621550033)); +#160413 = DIRECTION('',(1.,-1.224646799147E-16,-3.096025220137E-32)); +#160414 = DIRECTION('',(-3.096025220137E-32,3.79153737592E-48,-1.)); +#160415 = ADVANCED_FACE('',(#160416),#160498,.T.); +#160416 = FACE_BOUND('',#160417,.T.); +#160417 = EDGE_LOOP('',(#160418,#160428,#160436,#160442,#160443,#160444, + #160452,#160460,#160468,#160476,#160484,#160492)); +#160418 = ORIENTED_EDGE('',*,*,#160419,.T.); +#160419 = EDGE_CURVE('',#160420,#160422,#160424,.T.); +#160420 = VERTEX_POINT('',#160421); +#160421 = CARTESIAN_POINT('',(-0.95,-6.25,0.3)); +#160422 = VERTEX_POINT('',#160423); +#160423 = CARTESIAN_POINT('',(2.95,-6.25,0.3)); +#160424 = LINE('',#160425,#160426); +#160425 = CARTESIAN_POINT('',(-1.95,-6.25,0.3)); +#160426 = VECTOR('',#160427,1.); +#160427 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160428 = ORIENTED_EDGE('',*,*,#160429,.F.); +#160429 = EDGE_CURVE('',#160430,#160422,#160432,.T.); +#160430 = VERTEX_POINT('',#160431); +#160431 = CARTESIAN_POINT('',(2.95,-6.25,0.)); +#160432 = LINE('',#160433,#160434); +#160433 = CARTESIAN_POINT('',(2.95,-6.25,0.)); +#160434 = VECTOR('',#160435,1.); +#160435 = DIRECTION('',(0.,0.,1.)); +#160436 = ORIENTED_EDGE('',*,*,#160437,.F.); +#160437 = EDGE_CURVE('',#160340,#160430,#160438,.T.); +#160438 = LINE('',#160439,#160440); +#160439 = CARTESIAN_POINT('',(3.95,-6.25,0.)); +#160440 = VECTOR('',#160441,1.); +#160441 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160442 = ORIENTED_EDGE('',*,*,#160339,.T.); +#160443 = ORIENTED_EDGE('',*,*,#160325,.T.); +#160444 = ORIENTED_EDGE('',*,*,#160445,.F.); +#160445 = EDGE_CURVE('',#160446,#160318,#160448,.T.); +#160446 = VERTEX_POINT('',#160447); +#160447 = CARTESIAN_POINT('',(3.45,-6.25,0.8)); +#160448 = LINE('',#160449,#160450); +#160449 = CARTESIAN_POINT('',(3.45,-6.25,0.8)); +#160450 = VECTOR('',#160451,1.); +#160451 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160452 = ORIENTED_EDGE('',*,*,#160453,.F.); +#160453 = EDGE_CURVE('',#160454,#160446,#160456,.T.); +#160454 = VERTEX_POINT('',#160455); +#160455 = CARTESIAN_POINT('',(-1.45,-6.25,0.8)); +#160456 = LINE('',#160457,#160458); +#160457 = CARTESIAN_POINT('',(-1.45,-6.25,0.8)); +#160458 = VECTOR('',#160459,1.); +#160459 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160460 = ORIENTED_EDGE('',*,*,#160461,.F.); +#160461 = EDGE_CURVE('',#160462,#160454,#160464,.T.); +#160462 = VERTEX_POINT('',#160463); +#160463 = CARTESIAN_POINT('',(-1.45,-6.25,2.5)); +#160464 = LINE('',#160465,#160466); +#160465 = CARTESIAN_POINT('',(-1.45,-6.25,4.2)); +#160466 = VECTOR('',#160467,1.); +#160467 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160468 = ORIENTED_EDGE('',*,*,#160469,.T.); +#160469 = EDGE_CURVE('',#160462,#160470,#160472,.T.); +#160470 = VERTEX_POINT('',#160471); +#160471 = CARTESIAN_POINT('',(-1.95,-6.25,2.5)); +#160472 = LINE('',#160473,#160474); +#160473 = CARTESIAN_POINT('',(3.95,-6.25,2.5)); +#160474 = VECTOR('',#160475,1.); +#160475 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160476 = ORIENTED_EDGE('',*,*,#160477,.T.); +#160477 = EDGE_CURVE('',#160470,#160478,#160480,.T.); +#160478 = VERTEX_POINT('',#160479); +#160479 = CARTESIAN_POINT('',(-1.95,-6.25,0.)); +#160480 = LINE('',#160481,#160482); +#160481 = CARTESIAN_POINT('',(-1.95,-6.25,4.8)); +#160482 = VECTOR('',#160483,1.); +#160483 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160484 = ORIENTED_EDGE('',*,*,#160485,.F.); +#160485 = EDGE_CURVE('',#160486,#160478,#160488,.T.); +#160486 = VERTEX_POINT('',#160487); +#160487 = CARTESIAN_POINT('',(-0.95,-6.25,0.)); +#160488 = LINE('',#160489,#160490); +#160489 = CARTESIAN_POINT('',(-0.95,-6.25,0.)); +#160490 = VECTOR('',#160491,1.); +#160491 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160492 = ORIENTED_EDGE('',*,*,#160493,.T.); +#160493 = EDGE_CURVE('',#160486,#160420,#160494,.T.); +#160494 = LINE('',#160495,#160496); +#160495 = CARTESIAN_POINT('',(-0.95,-6.25,0.)); +#160496 = VECTOR('',#160497,1.); +#160497 = DIRECTION('',(0.,0.,1.)); +#160498 = PLANE('',#160499); +#160499 = AXIS2_PLACEMENT_3D('',#160500,#160501,#160502); +#160500 = CARTESIAN_POINT('',(1.,-6.25,0.939423076923)); +#160501 = DIRECTION('',(-1.224646799147E-16,-1.,-4.111705995194E-31)); +#160502 = DIRECTION('',(-5.03538758605E-47,-4.111705995194E-31,1.)); +#160503 = ADVANCED_FACE('',(#160504),#160555,.F.); +#160504 = FACE_BOUND('',#160505,.F.); +#160505 = EDGE_LOOP('',(#160506,#160507,#160515,#160523,#160531,#160539, + #160547,#160554)); +#160506 = ORIENTED_EDGE('',*,*,#160445,.F.); +#160507 = ORIENTED_EDGE('',*,*,#160508,.T.); +#160508 = EDGE_CURVE('',#160446,#160509,#160511,.T.); +#160509 = VERTEX_POINT('',#160510); +#160510 = CARTESIAN_POINT('',(3.45,-2.05,0.8)); +#160511 = LINE('',#160512,#160513); +#160512 = CARTESIAN_POINT('',(3.45,-6.25,0.8)); +#160513 = VECTOR('',#160514,1.); +#160514 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160515 = ORIENTED_EDGE('',*,*,#160516,.T.); +#160516 = EDGE_CURVE('',#160509,#160517,#160519,.T.); +#160517 = VERTEX_POINT('',#160518); +#160518 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#160519 = LINE('',#160520,#160521); +#160520 = CARTESIAN_POINT('',(3.45,-2.05,0.8)); +#160521 = VECTOR('',#160522,1.); +#160522 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160523 = ORIENTED_EDGE('',*,*,#160524,.F.); +#160524 = EDGE_CURVE('',#160525,#160517,#160527,.T.); +#160525 = VERTEX_POINT('',#160526); +#160526 = CARTESIAN_POINT('',(3.45,-6.25,4.2)); +#160527 = LINE('',#160528,#160529); +#160528 = CARTESIAN_POINT('',(3.45,-6.25,4.2)); +#160529 = VECTOR('',#160530,1.); +#160530 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160531 = ORIENTED_EDGE('',*,*,#160532,.F.); +#160532 = EDGE_CURVE('',#160533,#160525,#160535,.T.); +#160533 = VERTEX_POINT('',#160534); +#160534 = CARTESIAN_POINT('',(3.45,-6.25,3.3)); +#160535 = LINE('',#160536,#160537); +#160536 = CARTESIAN_POINT('',(3.45,-6.25,0.8)); +#160537 = VECTOR('',#160538,1.); +#160538 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160539 = ORIENTED_EDGE('',*,*,#160540,.T.); +#160540 = EDGE_CURVE('',#160533,#160541,#160543,.T.); +#160541 = VERTEX_POINT('',#160542); +#160542 = CARTESIAN_POINT('',(3.45,-4.65,3.3)); +#160543 = LINE('',#160544,#160545); +#160544 = CARTESIAN_POINT('',(3.45,-6.25,3.3)); +#160545 = VECTOR('',#160546,1.); +#160546 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160547 = ORIENTED_EDGE('',*,*,#160548,.F.); +#160548 = EDGE_CURVE('',#160310,#160541,#160549,.T.); +#160549 = CIRCLE('',#160550,0.4); +#160550 = AXIS2_PLACEMENT_3D('',#160551,#160552,#160553); +#160551 = CARTESIAN_POINT('',(3.45,-4.65,2.9)); +#160552 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160553 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#160554 = ORIENTED_EDGE('',*,*,#160317,.T.); +#160555 = PLANE('',#160556); +#160556 = AXIS2_PLACEMENT_3D('',#160557,#160558,#160559); +#160557 = CARTESIAN_POINT('',(3.45,-6.25,0.8)); +#160558 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160559 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#160560 = ADVANCED_FACE('',(#160561),#160572,.F.); +#160561 = FACE_BOUND('',#160562,.F.); +#160562 = EDGE_LOOP('',(#160563,#160564,#160565,#160571)); +#160563 = ORIENTED_EDGE('',*,*,#160309,.T.); +#160564 = ORIENTED_EDGE('',*,*,#160548,.T.); +#160565 = ORIENTED_EDGE('',*,*,#160566,.F.); +#160566 = EDGE_CURVE('',#160396,#160541,#160567,.T.); +#160567 = LINE('',#160568,#160569); +#160568 = CARTESIAN_POINT('',(3.95,-4.65,3.3)); +#160569 = VECTOR('',#160570,1.); +#160570 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160571 = ORIENTED_EDGE('',*,*,#160403,.T.); +#160572 = CYLINDRICAL_SURFACE('',#160573,0.4); +#160573 = AXIS2_PLACEMENT_3D('',#160574,#160575,#160576); +#160574 = CARTESIAN_POINT('',(3.95,-4.65,2.9)); +#160575 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160576 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#160577 = ADVANCED_FACE('',(#160578),#160596,.F.); +#160578 = FACE_BOUND('',#160579,.F.); +#160579 = EDGE_LOOP('',(#160580,#160588,#160594,#160595)); +#160580 = ORIENTED_EDGE('',*,*,#160581,.T.); +#160581 = EDGE_CURVE('',#160348,#160582,#160584,.T.); +#160582 = VERTEX_POINT('',#160583); +#160583 = CARTESIAN_POINT('',(2.95,1.35,0.)); +#160584 = LINE('',#160585,#160586); +#160585 = CARTESIAN_POINT('',(3.95,1.35,0.)); +#160586 = VECTOR('',#160587,1.); +#160587 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160588 = ORIENTED_EDGE('',*,*,#160589,.T.); +#160589 = EDGE_CURVE('',#160582,#160430,#160590,.T.); +#160590 = LINE('',#160591,#160592); +#160591 = CARTESIAN_POINT('',(2.95,1.35,0.)); +#160592 = VECTOR('',#160593,1.); +#160593 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#160594 = ORIENTED_EDGE('',*,*,#160437,.F.); +#160595 = ORIENTED_EDGE('',*,*,#160347,.F.); +#160596 = PLANE('',#160597); +#160597 = AXIS2_PLACEMENT_3D('',#160598,#160599,#160600); +#160598 = CARTESIAN_POINT('',(3.95,1.35,0.)); +#160599 = DIRECTION('',(0.,0.,1.)); +#160600 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#160601 = ADVANCED_FACE('',(#160602),#160620,.F.); +#160602 = FACE_BOUND('',#160603,.F.); +#160603 = EDGE_LOOP('',(#160604,#160612,#160618,#160619)); +#160604 = ORIENTED_EDGE('',*,*,#160605,.T.); +#160605 = EDGE_CURVE('',#160356,#160606,#160608,.T.); +#160606 = VERTEX_POINT('',#160607); +#160607 = CARTESIAN_POINT('',(2.95,1.35,3.2)); +#160608 = LINE('',#160609,#160610); +#160609 = CARTESIAN_POINT('',(3.95,1.35,3.2)); +#160610 = VECTOR('',#160611,1.); +#160611 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160612 = ORIENTED_EDGE('',*,*,#160613,.T.); +#160613 = EDGE_CURVE('',#160606,#160582,#160614,.T.); +#160614 = LINE('',#160615,#160616); +#160615 = CARTESIAN_POINT('',(2.95,1.35,3.2)); +#160616 = VECTOR('',#160617,1.); +#160617 = DIRECTION('',(-0.,0.,-1.)); +#160618 = ORIENTED_EDGE('',*,*,#160581,.F.); +#160619 = ORIENTED_EDGE('',*,*,#160355,.F.); +#160620 = PLANE('',#160621); +#160621 = AXIS2_PLACEMENT_3D('',#160622,#160623,#160624); +#160622 = CARTESIAN_POINT('',(3.95,1.35,3.2)); +#160623 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#160624 = DIRECTION('',(-0.,0.,-1.)); +#160625 = ADVANCED_FACE('',(#160626),#160644,.F.); +#160626 = FACE_BOUND('',#160627,.F.); +#160627 = EDGE_LOOP('',(#160628,#160636,#160642,#160643)); +#160628 = ORIENTED_EDGE('',*,*,#160629,.T.); +#160629 = EDGE_CURVE('',#160364,#160630,#160632,.T.); +#160630 = VERTEX_POINT('',#160631); +#160631 = CARTESIAN_POINT('',(2.95,-0.25,4.1)); +#160632 = LINE('',#160633,#160634); +#160633 = CARTESIAN_POINT('',(3.95,-0.25,4.1)); +#160634 = VECTOR('',#160635,1.); +#160635 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160636 = ORIENTED_EDGE('',*,*,#160637,.T.); +#160637 = EDGE_CURVE('',#160630,#160606,#160638,.T.); +#160638 = LINE('',#160639,#160640); +#160639 = CARTESIAN_POINT('',(2.95,-0.25,4.1)); +#160640 = VECTOR('',#160641,1.); +#160641 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#160642 = ORIENTED_EDGE('',*,*,#160605,.F.); +#160643 = ORIENTED_EDGE('',*,*,#160363,.F.); +#160644 = PLANE('',#160645); +#160645 = AXIS2_PLACEMENT_3D('',#160646,#160647,#160648); +#160646 = CARTESIAN_POINT('',(3.95,-0.25,4.1)); +#160647 = DIRECTION('',(-6.003968578616E-17,-0.490261239633, + -0.871575537124)); +#160648 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#160649 = ADVANCED_FACE('',(#160650),#160700,.F.); +#160650 = FACE_BOUND('',#160651,.F.); +#160651 = EDGE_LOOP('',(#160652,#160662,#160670,#160676,#160677,#160678, + #160686,#160694)); +#160652 = ORIENTED_EDGE('',*,*,#160653,.F.); +#160653 = EDGE_CURVE('',#160654,#160656,#160658,.T.); +#160654 = VERTEX_POINT('',#160655); +#160655 = CARTESIAN_POINT('',(2.75,-0.25,0.3)); +#160656 = VERTEX_POINT('',#160657); +#160657 = CARTESIAN_POINT('',(2.75,-0.25,4.2)); +#160658 = LINE('',#160659,#160660); +#160659 = CARTESIAN_POINT('',(2.75,-0.25,0.3)); +#160660 = VECTOR('',#160661,1.); +#160661 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160662 = ORIENTED_EDGE('',*,*,#160663,.T.); +#160663 = EDGE_CURVE('',#160654,#160664,#160666,.T.); +#160664 = VERTEX_POINT('',#160665); +#160665 = CARTESIAN_POINT('',(2.95,-0.25,0.3)); +#160666 = LINE('',#160667,#160668); +#160667 = CARTESIAN_POINT('',(-1.95,-0.25,0.3)); +#160668 = VECTOR('',#160669,1.); +#160669 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160670 = ORIENTED_EDGE('',*,*,#160671,.T.); +#160671 = EDGE_CURVE('',#160664,#160630,#160672,.T.); +#160672 = LINE('',#160673,#160674); +#160673 = CARTESIAN_POINT('',(2.95,-0.25,0.3)); +#160674 = VECTOR('',#160675,1.); +#160675 = DIRECTION('',(0.,0.,1.)); +#160676 = ORIENTED_EDGE('',*,*,#160629,.F.); +#160677 = ORIENTED_EDGE('',*,*,#160371,.T.); +#160678 = ORIENTED_EDGE('',*,*,#160679,.T.); +#160679 = EDGE_CURVE('',#160372,#160680,#160682,.T.); +#160680 = VERTEX_POINT('',#160681); +#160681 = CARTESIAN_POINT('',(3.4,-0.25,4.8)); +#160682 = LINE('',#160683,#160684); +#160683 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#160684 = VECTOR('',#160685,1.); +#160685 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160686 = ORIENTED_EDGE('',*,*,#160687,.T.); +#160687 = EDGE_CURVE('',#160680,#160688,#160690,.T.); +#160688 = VERTEX_POINT('',#160689); +#160689 = CARTESIAN_POINT('',(3.4,-0.25,4.2)); +#160690 = LINE('',#160691,#160692); +#160691 = CARTESIAN_POINT('',(3.4,-0.25,4.8)); +#160692 = VECTOR('',#160693,1.); +#160693 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160694 = ORIENTED_EDGE('',*,*,#160695,.T.); +#160695 = EDGE_CURVE('',#160688,#160656,#160696,.T.); +#160696 = LINE('',#160697,#160698); +#160697 = CARTESIAN_POINT('',(3.4,-0.25,4.2)); +#160698 = VECTOR('',#160699,1.); +#160699 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160700 = PLANE('',#160701); +#160701 = AXIS2_PLACEMENT_3D('',#160702,#160703,#160704); +#160702 = CARTESIAN_POINT('',(1.,-0.25,2.55)); +#160703 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160704 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#160705 = ADVANCED_FACE('',(#160706),#160836,.F.); +#160706 = FACE_BOUND('',#160707,.F.); +#160707 = EDGE_LOOP('',(#160708,#160709,#160710,#160718,#160726,#160734, + #160742,#160750,#160758,#160766,#160774,#160782,#160790,#160798, + #160806,#160814,#160822,#160830)); +#160708 = ORIENTED_EDGE('',*,*,#160679,.F.); +#160709 = ORIENTED_EDGE('',*,*,#160379,.T.); +#160710 = ORIENTED_EDGE('',*,*,#160711,.T.); +#160711 = EDGE_CURVE('',#160380,#160712,#160714,.T.); +#160712 = VERTEX_POINT('',#160713); +#160713 = CARTESIAN_POINT('',(1.45,-6.25,4.8)); +#160714 = LINE('',#160715,#160716); +#160715 = CARTESIAN_POINT('',(3.95,-6.25,4.8)); +#160716 = VECTOR('',#160717,1.); +#160717 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160718 = ORIENTED_EDGE('',*,*,#160719,.T.); +#160719 = EDGE_CURVE('',#160712,#160720,#160722,.T.); +#160720 = VERTEX_POINT('',#160721); +#160721 = CARTESIAN_POINT('',(1.45,-2.35,4.8)); +#160722 = LINE('',#160723,#160724); +#160723 = CARTESIAN_POINT('',(1.45,-6.25,4.8)); +#160724 = VECTOR('',#160725,1.); +#160725 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160726 = ORIENTED_EDGE('',*,*,#160727,.T.); +#160727 = EDGE_CURVE('',#160720,#160728,#160730,.T.); +#160728 = VERTEX_POINT('',#160729); +#160729 = CARTESIAN_POINT('',(0.55,-2.35,4.8)); +#160730 = LINE('',#160731,#160732); +#160731 = CARTESIAN_POINT('',(1.45,-2.35,4.8)); +#160732 = VECTOR('',#160733,1.); +#160733 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160734 = ORIENTED_EDGE('',*,*,#160735,.T.); +#160735 = EDGE_CURVE('',#160728,#160736,#160738,.T.); +#160736 = VERTEX_POINT('',#160737); +#160737 = CARTESIAN_POINT('',(0.55,-6.25,4.8)); +#160738 = LINE('',#160739,#160740); +#160739 = CARTESIAN_POINT('',(0.55,-2.35,4.8)); +#160740 = VECTOR('',#160741,1.); +#160741 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160742 = ORIENTED_EDGE('',*,*,#160743,.T.); +#160743 = EDGE_CURVE('',#160736,#160744,#160746,.T.); +#160744 = VERTEX_POINT('',#160745); +#160745 = CARTESIAN_POINT('',(-0.45,-6.25,4.8)); +#160746 = LINE('',#160747,#160748); +#160747 = CARTESIAN_POINT('',(3.95,-6.25,4.8)); +#160748 = VECTOR('',#160749,1.); +#160749 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160750 = ORIENTED_EDGE('',*,*,#160751,.F.); +#160751 = EDGE_CURVE('',#160752,#160744,#160754,.T.); +#160752 = VERTEX_POINT('',#160753); +#160753 = CARTESIAN_POINT('',(-0.45,-4.45,4.8)); +#160754 = LINE('',#160755,#160756); +#160755 = CARTESIAN_POINT('',(-0.45,-4.45,4.8)); +#160756 = VECTOR('',#160757,1.); +#160757 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160758 = ORIENTED_EDGE('',*,*,#160759,.F.); +#160759 = EDGE_CURVE('',#160760,#160752,#160762,.T.); +#160760 = VERTEX_POINT('',#160761); +#160761 = CARTESIAN_POINT('',(-0.4,-4.45,4.8)); +#160762 = LINE('',#160763,#160764); +#160763 = CARTESIAN_POINT('',(-0.4,-4.45,4.8)); +#160764 = VECTOR('',#160765,1.); +#160765 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160766 = ORIENTED_EDGE('',*,*,#160767,.F.); +#160767 = EDGE_CURVE('',#160768,#160760,#160770,.T.); +#160768 = VERTEX_POINT('',#160769); +#160769 = CARTESIAN_POINT('',(-0.4,-0.45,4.8)); +#160770 = LINE('',#160771,#160772); +#160771 = CARTESIAN_POINT('',(-0.4,-0.25,4.8)); +#160772 = VECTOR('',#160773,1.); +#160773 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160774 = ORIENTED_EDGE('',*,*,#160775,.F.); +#160775 = EDGE_CURVE('',#160776,#160768,#160778,.T.); +#160776 = VERTEX_POINT('',#160777); +#160777 = CARTESIAN_POINT('',(0.75,-0.45,4.8)); +#160778 = LINE('',#160779,#160780); +#160779 = CARTESIAN_POINT('',(0.75,-0.45,4.8)); +#160780 = VECTOR('',#160781,1.); +#160781 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160782 = ORIENTED_EDGE('',*,*,#160783,.F.); +#160783 = EDGE_CURVE('',#160784,#160776,#160786,.T.); +#160784 = VERTEX_POINT('',#160785); +#160785 = CARTESIAN_POINT('',(0.75,-0.25,4.8)); +#160786 = LINE('',#160787,#160788); +#160787 = CARTESIAN_POINT('',(0.75,-0.25,4.8)); +#160788 = VECTOR('',#160789,1.); +#160789 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160790 = ORIENTED_EDGE('',*,*,#160791,.F.); +#160791 = EDGE_CURVE('',#160792,#160784,#160794,.T.); +#160792 = VERTEX_POINT('',#160793); +#160793 = CARTESIAN_POINT('',(1.25,-0.25,4.8)); +#160794 = LINE('',#160795,#160796); +#160795 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#160796 = VECTOR('',#160797,1.); +#160797 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160798 = ORIENTED_EDGE('',*,*,#160799,.T.); +#160799 = EDGE_CURVE('',#160792,#160800,#160802,.T.); +#160800 = VERTEX_POINT('',#160801); +#160801 = CARTESIAN_POINT('',(1.25,-0.45,4.8)); +#160802 = LINE('',#160803,#160804); +#160803 = CARTESIAN_POINT('',(1.25,-0.25,4.8)); +#160804 = VECTOR('',#160805,1.); +#160805 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160806 = ORIENTED_EDGE('',*,*,#160807,.F.); +#160807 = EDGE_CURVE('',#160808,#160800,#160810,.T.); +#160808 = VERTEX_POINT('',#160809); +#160809 = CARTESIAN_POINT('',(2.4,-0.45,4.8)); +#160810 = LINE('',#160811,#160812); +#160811 = CARTESIAN_POINT('',(2.75,-0.45,4.8)); +#160812 = VECTOR('',#160813,1.); +#160813 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160814 = ORIENTED_EDGE('',*,*,#160815,.T.); +#160815 = EDGE_CURVE('',#160808,#160816,#160818,.T.); +#160816 = VERTEX_POINT('',#160817); +#160817 = CARTESIAN_POINT('',(2.4,-4.45,4.8)); +#160818 = LINE('',#160819,#160820); +#160819 = CARTESIAN_POINT('',(2.4,-0.25,4.8)); +#160820 = VECTOR('',#160821,1.); +#160821 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160822 = ORIENTED_EDGE('',*,*,#160823,.T.); +#160823 = EDGE_CURVE('',#160816,#160824,#160826,.T.); +#160824 = VERTEX_POINT('',#160825); +#160825 = CARTESIAN_POINT('',(3.4,-4.45,4.8)); +#160826 = LINE('',#160827,#160828); +#160827 = CARTESIAN_POINT('',(2.4,-4.45,4.8)); +#160828 = VECTOR('',#160829,1.); +#160829 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160830 = ORIENTED_EDGE('',*,*,#160831,.T.); +#160831 = EDGE_CURVE('',#160824,#160680,#160832,.T.); +#160832 = LINE('',#160833,#160834); +#160833 = CARTESIAN_POINT('',(3.4,-4.45,4.8)); +#160834 = VECTOR('',#160835,1.); +#160835 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160836 = PLANE('',#160837); +#160837 = AXIS2_PLACEMENT_3D('',#160838,#160839,#160840); +#160838 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#160839 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160840 = DIRECTION('',(-1.,1.224646799147E-16,6.927121900793E-45)); +#160841 = ADVANCED_FACE('',(#160842),#160867,.T.); +#160842 = FACE_BOUND('',#160843,.T.); +#160843 = EDGE_LOOP('',(#160844,#160850,#160851,#160852,#160860,#160866) + ); +#160844 = ORIENTED_EDGE('',*,*,#160845,.F.); +#160845 = EDGE_CURVE('',#160388,#160533,#160846,.T.); +#160846 = LINE('',#160847,#160848); +#160847 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#160848 = VECTOR('',#160849,1.); +#160849 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160850 = ORIENTED_EDGE('',*,*,#160387,.T.); +#160851 = ORIENTED_EDGE('',*,*,#160711,.T.); +#160852 = ORIENTED_EDGE('',*,*,#160853,.T.); +#160853 = EDGE_CURVE('',#160712,#160854,#160856,.T.); +#160854 = VERTEX_POINT('',#160855); +#160855 = CARTESIAN_POINT('',(1.45,-6.25,4.2)); +#160856 = LINE('',#160857,#160858); +#160857 = CARTESIAN_POINT('',(1.45,-6.25,4.8)); +#160858 = VECTOR('',#160859,1.); +#160859 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160860 = ORIENTED_EDGE('',*,*,#160861,.F.); +#160861 = EDGE_CURVE('',#160525,#160854,#160862,.T.); +#160862 = LINE('',#160863,#160864); +#160863 = CARTESIAN_POINT('',(3.45,-6.25,4.2)); +#160864 = VECTOR('',#160865,1.); +#160865 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160866 = ORIENTED_EDGE('',*,*,#160532,.F.); +#160867 = PLANE('',#160868); +#160868 = AXIS2_PLACEMENT_3D('',#160869,#160870,#160871); +#160869 = CARTESIAN_POINT('',(1.,-6.25,2.55)); +#160870 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#160871 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#160872 = ADVANCED_FACE('',(#160873),#160879,.T.); +#160873 = FACE_BOUND('',#160874,.T.); +#160874 = EDGE_LOOP('',(#160875,#160876,#160877,#160878)); +#160875 = ORIENTED_EDGE('',*,*,#160395,.F.); +#160876 = ORIENTED_EDGE('',*,*,#160845,.T.); +#160877 = ORIENTED_EDGE('',*,*,#160540,.T.); +#160878 = ORIENTED_EDGE('',*,*,#160566,.F.); +#160879 = PLANE('',#160880); +#160880 = AXIS2_PLACEMENT_3D('',#160881,#160882,#160883); +#160881 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#160882 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#160883 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160884 = ADVANCED_FACE('',(#160885),#160965,.F.); +#160885 = FACE_BOUND('',#160886,.F.); +#160886 = EDGE_LOOP('',(#160887,#160897,#160903,#160904,#160910,#160911, + #160919,#160927,#160935,#160943,#160951,#160959)); +#160887 = ORIENTED_EDGE('',*,*,#160888,.F.); +#160888 = EDGE_CURVE('',#160889,#160891,#160893,.T.); +#160889 = VERTEX_POINT('',#160890); +#160890 = CARTESIAN_POINT('',(-0.95,-0.25,0.3)); +#160891 = VERTEX_POINT('',#160892); +#160892 = CARTESIAN_POINT('',(-0.75,-0.25,0.3)); +#160893 = LINE('',#160894,#160895); +#160894 = CARTESIAN_POINT('',(-1.95,-0.25,0.3)); +#160895 = VECTOR('',#160896,1.); +#160896 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160897 = ORIENTED_EDGE('',*,*,#160898,.F.); +#160898 = EDGE_CURVE('',#160420,#160889,#160899,.T.); +#160899 = LINE('',#160900,#160901); +#160900 = CARTESIAN_POINT('',(-0.95,-6.25,0.3)); +#160901 = VECTOR('',#160902,1.); +#160902 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#160903 = ORIENTED_EDGE('',*,*,#160419,.T.); +#160904 = ORIENTED_EDGE('',*,*,#160905,.T.); +#160905 = EDGE_CURVE('',#160422,#160664,#160906,.T.); +#160906 = LINE('',#160907,#160908); +#160907 = CARTESIAN_POINT('',(2.95,-6.25,0.3)); +#160908 = VECTOR('',#160909,1.); +#160909 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#160910 = ORIENTED_EDGE('',*,*,#160663,.F.); +#160911 = ORIENTED_EDGE('',*,*,#160912,.F.); +#160912 = EDGE_CURVE('',#160913,#160654,#160915,.T.); +#160913 = VERTEX_POINT('',#160914); +#160914 = CARTESIAN_POINT('',(2.75,-0.45,0.3)); +#160915 = LINE('',#160916,#160917); +#160916 = CARTESIAN_POINT('',(2.75,-0.45,0.3)); +#160917 = VECTOR('',#160918,1.); +#160918 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160919 = ORIENTED_EDGE('',*,*,#160920,.T.); +#160920 = EDGE_CURVE('',#160913,#160921,#160923,.T.); +#160921 = VERTEX_POINT('',#160922); +#160922 = CARTESIAN_POINT('',(1.25,-0.45,0.3)); +#160923 = LINE('',#160924,#160925); +#160924 = CARTESIAN_POINT('',(2.75,-0.45,0.3)); +#160925 = VECTOR('',#160926,1.); +#160926 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160927 = ORIENTED_EDGE('',*,*,#160928,.T.); +#160928 = EDGE_CURVE('',#160921,#160929,#160931,.T.); +#160929 = VERTEX_POINT('',#160930); +#160930 = CARTESIAN_POINT('',(1.25,-0.25,0.3)); +#160931 = LINE('',#160932,#160933); +#160932 = CARTESIAN_POINT('',(1.25,-0.45,0.3)); +#160933 = VECTOR('',#160934,1.); +#160934 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160935 = ORIENTED_EDGE('',*,*,#160936,.F.); +#160936 = EDGE_CURVE('',#160937,#160929,#160939,.T.); +#160937 = VERTEX_POINT('',#160938); +#160938 = CARTESIAN_POINT('',(0.75,-0.25,0.3)); +#160939 = LINE('',#160940,#160941); +#160940 = CARTESIAN_POINT('',(-1.95,-0.25,0.3)); +#160941 = VECTOR('',#160942,1.); +#160942 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#160943 = ORIENTED_EDGE('',*,*,#160944,.F.); +#160944 = EDGE_CURVE('',#160945,#160937,#160947,.T.); +#160945 = VERTEX_POINT('',#160946); +#160946 = CARTESIAN_POINT('',(0.75,-0.45,0.3)); +#160947 = LINE('',#160948,#160949); +#160948 = CARTESIAN_POINT('',(0.75,-0.45,0.3)); +#160949 = VECTOR('',#160950,1.); +#160950 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160951 = ORIENTED_EDGE('',*,*,#160952,.T.); +#160952 = EDGE_CURVE('',#160945,#160953,#160955,.T.); +#160953 = VERTEX_POINT('',#160954); +#160954 = CARTESIAN_POINT('',(-0.75,-0.45,0.3)); +#160955 = LINE('',#160956,#160957); +#160956 = CARTESIAN_POINT('',(0.75,-0.45,0.3)); +#160957 = VECTOR('',#160958,1.); +#160958 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160959 = ORIENTED_EDGE('',*,*,#160960,.T.); +#160960 = EDGE_CURVE('',#160953,#160891,#160961,.T.); +#160961 = LINE('',#160962,#160963); +#160962 = CARTESIAN_POINT('',(-0.75,-0.45,0.3)); +#160963 = VECTOR('',#160964,1.); +#160964 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160965 = PLANE('',#160966); +#160966 = AXIS2_PLACEMENT_3D('',#160967,#160968,#160969); +#160967 = CARTESIAN_POINT('',(-1.95,-0.25,0.3)); +#160968 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#160969 = DIRECTION('',(1.,-1.224646799147E-16,-6.927121900793E-45)); +#160970 = ADVANCED_FACE('',(#160971),#160979,.T.); +#160971 = FACE_BOUND('',#160972,.T.); +#160972 = EDGE_LOOP('',(#160973,#160974,#160975,#160976,#160977,#160978) + ); +#160973 = ORIENTED_EDGE('',*,*,#160671,.T.); +#160974 = ORIENTED_EDGE('',*,*,#160637,.T.); +#160975 = ORIENTED_EDGE('',*,*,#160613,.T.); +#160976 = ORIENTED_EDGE('',*,*,#160589,.T.); +#160977 = ORIENTED_EDGE('',*,*,#160429,.T.); +#160978 = ORIENTED_EDGE('',*,*,#160905,.T.); +#160979 = PLANE('',#160980); +#160980 = AXIS2_PLACEMENT_3D('',#160981,#160982,#160983); +#160981 = CARTESIAN_POINT('',(2.95,-1.566489992801,0.968760807125)); +#160982 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#160983 = DIRECTION('',(0.,0.,1.)); +#160984 = ADVANCED_FACE('',(#160985),#161035,.F.); +#160985 = FACE_BOUND('',#160986,.F.); +#160986 = EDGE_LOOP('',(#160987,#160988,#160996,#161004,#161012,#161020, + #161028,#161034)); +#160987 = ORIENTED_EDGE('',*,*,#160453,.F.); +#160988 = ORIENTED_EDGE('',*,*,#160989,.T.); +#160989 = EDGE_CURVE('',#160454,#160990,#160992,.T.); +#160990 = VERTEX_POINT('',#160991); +#160991 = CARTESIAN_POINT('',(-1.45,-2.05,0.8)); +#160992 = LINE('',#160993,#160994); +#160993 = CARTESIAN_POINT('',(-1.45,-6.25,0.8)); +#160994 = VECTOR('',#160995,1.); +#160995 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#160996 = ORIENTED_EDGE('',*,*,#160997,.T.); +#160997 = EDGE_CURVE('',#160990,#160998,#161000,.T.); +#160998 = VERTEX_POINT('',#160999); +#160999 = CARTESIAN_POINT('',(0.8,-2.05,0.8)); +#161000 = LINE('',#161001,#161002); +#161001 = CARTESIAN_POINT('',(-1.45,-2.05,0.8)); +#161002 = VECTOR('',#161003,1.); +#161003 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161004 = ORIENTED_EDGE('',*,*,#161005,.T.); +#161005 = EDGE_CURVE('',#160998,#161006,#161008,.T.); +#161006 = VERTEX_POINT('',#161007); +#161007 = CARTESIAN_POINT('',(0.8,-3.95,0.8)); +#161008 = LINE('',#161009,#161010); +#161009 = CARTESIAN_POINT('',(0.8,-2.05,0.8)); +#161010 = VECTOR('',#161011,1.); +#161011 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161012 = ORIENTED_EDGE('',*,*,#161013,.T.); +#161013 = EDGE_CURVE('',#161006,#161014,#161016,.T.); +#161014 = VERTEX_POINT('',#161015); +#161015 = CARTESIAN_POINT('',(1.2,-3.95,0.8)); +#161016 = LINE('',#161017,#161018); +#161017 = CARTESIAN_POINT('',(0.8,-3.95,0.8)); +#161018 = VECTOR('',#161019,1.); +#161019 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161020 = ORIENTED_EDGE('',*,*,#161021,.F.); +#161021 = EDGE_CURVE('',#161022,#161014,#161024,.T.); +#161022 = VERTEX_POINT('',#161023); +#161023 = CARTESIAN_POINT('',(1.2,-2.05,0.8)); +#161024 = LINE('',#161025,#161026); +#161025 = CARTESIAN_POINT('',(1.2,-2.05,0.8)); +#161026 = VECTOR('',#161027,1.); +#161027 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161028 = ORIENTED_EDGE('',*,*,#161029,.T.); +#161029 = EDGE_CURVE('',#161022,#160509,#161030,.T.); +#161030 = LINE('',#161031,#161032); +#161031 = CARTESIAN_POINT('',(-1.45,-2.05,0.8)); +#161032 = VECTOR('',#161033,1.); +#161033 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161034 = ORIENTED_EDGE('',*,*,#160508,.F.); +#161035 = PLANE('',#161036); +#161036 = AXIS2_PLACEMENT_3D('',#161037,#161038,#161039); +#161037 = CARTESIAN_POINT('',(-1.45,-6.25,0.8)); +#161038 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161039 = DIRECTION('',(1.,-1.224646799147E-16,-6.927121900793E-45)); +#161040 = ADVANCED_FACE('',(#161041),#161092,.F.); +#161041 = FACE_BOUND('',#161042,.F.); +#161042 = EDGE_LOOP('',(#161043,#161053,#161061,#161067,#161068,#161069, + #161077,#161086)); +#161043 = ORIENTED_EDGE('',*,*,#161044,.F.); +#161044 = EDGE_CURVE('',#161045,#161047,#161049,.T.); +#161045 = VERTEX_POINT('',#161046); +#161046 = CARTESIAN_POINT('',(-1.45,-6.25,4.2)); +#161047 = VERTEX_POINT('',#161048); +#161048 = CARTESIAN_POINT('',(-1.45,-6.25,3.3)); +#161049 = LINE('',#161050,#161051); +#161050 = CARTESIAN_POINT('',(-1.45,-6.25,4.2)); +#161051 = VECTOR('',#161052,1.); +#161052 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161053 = ORIENTED_EDGE('',*,*,#161054,.T.); +#161054 = EDGE_CURVE('',#161045,#161055,#161057,.T.); +#161055 = VERTEX_POINT('',#161056); +#161056 = CARTESIAN_POINT('',(-1.45,-2.05,4.2)); +#161057 = LINE('',#161058,#161059); +#161058 = CARTESIAN_POINT('',(-1.45,-6.25,4.2)); +#161059 = VECTOR('',#161060,1.); +#161060 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161061 = ORIENTED_EDGE('',*,*,#161062,.T.); +#161062 = EDGE_CURVE('',#161055,#160990,#161063,.T.); +#161063 = LINE('',#161064,#161065); +#161064 = CARTESIAN_POINT('',(-1.45,-2.05,4.2)); +#161065 = VECTOR('',#161066,1.); +#161066 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161067 = ORIENTED_EDGE('',*,*,#160989,.F.); +#161068 = ORIENTED_EDGE('',*,*,#160461,.F.); +#161069 = ORIENTED_EDGE('',*,*,#161070,.T.); +#161070 = EDGE_CURVE('',#160462,#161071,#161073,.T.); +#161071 = VERTEX_POINT('',#161072); +#161072 = CARTESIAN_POINT('',(-1.45,-4.65,2.5)); +#161073 = LINE('',#161074,#161075); +#161074 = CARTESIAN_POINT('',(-1.45,-5.45,2.5)); +#161075 = VECTOR('',#161076,1.); +#161076 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161077 = ORIENTED_EDGE('',*,*,#161078,.T.); +#161078 = EDGE_CURVE('',#161071,#161079,#161081,.T.); +#161079 = VERTEX_POINT('',#161080); +#161080 = CARTESIAN_POINT('',(-1.45,-4.65,3.3)); +#161081 = CIRCLE('',#161082,0.4); +#161082 = AXIS2_PLACEMENT_3D('',#161083,#161084,#161085); +#161083 = CARTESIAN_POINT('',(-1.45,-4.65,2.9)); +#161084 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161085 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#161086 = ORIENTED_EDGE('',*,*,#161087,.T.); +#161087 = EDGE_CURVE('',#161079,#161047,#161088,.T.); +#161088 = LINE('',#161089,#161090); +#161089 = CARTESIAN_POINT('',(-1.45,-6.25,3.3)); +#161090 = VECTOR('',#161091,1.); +#161091 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161092 = PLANE('',#161093); +#161093 = AXIS2_PLACEMENT_3D('',#161094,#161095,#161096); +#161094 = CARTESIAN_POINT('',(-1.45,-6.25,4.2)); +#161095 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161096 = DIRECTION('',(-1.359631073446E-32,-1.110223024625E-16,-1.)); +#161097 = ADVANCED_FACE('',(#161098),#161116,.T.); +#161098 = FACE_BOUND('',#161099,.T.); +#161099 = EDGE_LOOP('',(#161100,#161101,#161109,#161115)); +#161100 = ORIENTED_EDGE('',*,*,#161070,.T.); +#161101 = ORIENTED_EDGE('',*,*,#161102,.T.); +#161102 = EDGE_CURVE('',#161071,#161103,#161105,.T.); +#161103 = VERTEX_POINT('',#161104); +#161104 = CARTESIAN_POINT('',(-1.95,-4.65,2.5)); +#161105 = LINE('',#161106,#161107); +#161106 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#161107 = VECTOR('',#161108,1.); +#161108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161109 = ORIENTED_EDGE('',*,*,#161110,.T.); +#161110 = EDGE_CURVE('',#161103,#160470,#161111,.T.); +#161111 = LINE('',#161112,#161113); +#161112 = CARTESIAN_POINT('',(-1.95,-2.45,2.5)); +#161113 = VECTOR('',#161114,1.); +#161114 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161115 = ORIENTED_EDGE('',*,*,#160469,.F.); +#161116 = PLANE('',#161117); +#161117 = AXIS2_PLACEMENT_3D('',#161118,#161119,#161120); +#161118 = CARTESIAN_POINT('',(3.95,-4.65,2.5)); +#161119 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161120 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161121 = ADVANCED_FACE('',(#161122),#161189,.T.); +#161122 = FACE_BOUND('',#161123,.T.); +#161123 = EDGE_LOOP('',(#161124,#161134,#161142,#161150,#161156,#161157, + #161158,#161167,#161175,#161183)); +#161124 = ORIENTED_EDGE('',*,*,#161125,.T.); +#161125 = EDGE_CURVE('',#161126,#161128,#161130,.T.); +#161126 = VERTEX_POINT('',#161127); +#161127 = CARTESIAN_POINT('',(-1.95,-0.25,4.8)); +#161128 = VERTEX_POINT('',#161129); +#161129 = CARTESIAN_POINT('',(-1.95,-0.25,4.1)); +#161130 = LINE('',#161131,#161132); +#161131 = CARTESIAN_POINT('',(-1.95,-0.25,4.8)); +#161132 = VECTOR('',#161133,1.); +#161133 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161134 = ORIENTED_EDGE('',*,*,#161135,.T.); +#161135 = EDGE_CURVE('',#161128,#161136,#161138,.T.); +#161136 = VERTEX_POINT('',#161137); +#161137 = CARTESIAN_POINT('',(-1.95,1.35,3.2)); +#161138 = LINE('',#161139,#161140); +#161139 = CARTESIAN_POINT('',(-1.95,-0.25,4.1)); +#161140 = VECTOR('',#161141,1.); +#161141 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#161142 = ORIENTED_EDGE('',*,*,#161143,.T.); +#161143 = EDGE_CURVE('',#161136,#161144,#161146,.T.); +#161144 = VERTEX_POINT('',#161145); +#161145 = CARTESIAN_POINT('',(-1.95,1.35,0.)); +#161146 = LINE('',#161147,#161148); +#161147 = CARTESIAN_POINT('',(-1.95,1.35,3.2)); +#161148 = VECTOR('',#161149,1.); +#161149 = DIRECTION('',(-0.,0.,-1.)); +#161150 = ORIENTED_EDGE('',*,*,#161151,.T.); +#161151 = EDGE_CURVE('',#161144,#160478,#161152,.T.); +#161152 = LINE('',#161153,#161154); +#161153 = CARTESIAN_POINT('',(-1.95,1.35,0.)); +#161154 = VECTOR('',#161155,1.); +#161155 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#161156 = ORIENTED_EDGE('',*,*,#160477,.F.); +#161157 = ORIENTED_EDGE('',*,*,#161110,.F.); +#161158 = ORIENTED_EDGE('',*,*,#161159,.T.); +#161159 = EDGE_CURVE('',#161103,#161160,#161162,.T.); +#161160 = VERTEX_POINT('',#161161); +#161161 = CARTESIAN_POINT('',(-1.95,-4.65,3.3)); +#161162 = CIRCLE('',#161163,0.4); +#161163 = AXIS2_PLACEMENT_3D('',#161164,#161165,#161166); +#161164 = CARTESIAN_POINT('',(-1.95,-4.65,2.9)); +#161165 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161166 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#161167 = ORIENTED_EDGE('',*,*,#161168,.F.); +#161168 = EDGE_CURVE('',#161169,#161160,#161171,.T.); +#161169 = VERTEX_POINT('',#161170); +#161170 = CARTESIAN_POINT('',(-1.95,-6.25,3.3)); +#161171 = LINE('',#161172,#161173); +#161172 = CARTESIAN_POINT('',(-1.95,-3.25,3.3)); +#161173 = VECTOR('',#161174,1.); +#161174 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161175 = ORIENTED_EDGE('',*,*,#161176,.F.); +#161176 = EDGE_CURVE('',#161177,#161169,#161179,.T.); +#161177 = VERTEX_POINT('',#161178); +#161178 = CARTESIAN_POINT('',(-1.95,-6.25,4.8)); +#161179 = LINE('',#161180,#161181); +#161180 = CARTESIAN_POINT('',(-1.95,-6.25,4.8)); +#161181 = VECTOR('',#161182,1.); +#161182 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161183 = ORIENTED_EDGE('',*,*,#161184,.F.); +#161184 = EDGE_CURVE('',#161126,#161177,#161185,.T.); +#161185 = LINE('',#161186,#161187); +#161186 = CARTESIAN_POINT('',(-1.95,-0.25,4.8)); +#161187 = VECTOR('',#161188,1.); +#161188 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161189 = PLANE('',#161190); +#161190 = AXIS2_PLACEMENT_3D('',#161191,#161192,#161193); +#161191 = CARTESIAN_POINT('',(-1.95,-2.909897467985,2.368621550033)); +#161192 = DIRECTION('',(-1.,1.224646799147E-16,-3.525915016947E-32)); +#161193 = DIRECTION('',(-3.525915016947E-32,4.31800053957E-48,1.)); +#161194 = ADVANCED_FACE('',(#161195),#161213,.F.); +#161195 = FACE_BOUND('',#161196,.F.); +#161196 = EDGE_LOOP('',(#161197,#161205,#161206,#161207)); +#161197 = ORIENTED_EDGE('',*,*,#161198,.T.); +#161198 = EDGE_CURVE('',#161199,#161144,#161201,.T.); +#161199 = VERTEX_POINT('',#161200); +#161200 = CARTESIAN_POINT('',(-0.95,1.35,0.)); +#161201 = LINE('',#161202,#161203); +#161202 = CARTESIAN_POINT('',(-0.95,1.35,0.)); +#161203 = VECTOR('',#161204,1.); +#161204 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161205 = ORIENTED_EDGE('',*,*,#161151,.T.); +#161206 = ORIENTED_EDGE('',*,*,#160485,.F.); +#161207 = ORIENTED_EDGE('',*,*,#161208,.F.); +#161208 = EDGE_CURVE('',#161199,#160486,#161209,.T.); +#161209 = LINE('',#161210,#161211); +#161210 = CARTESIAN_POINT('',(-0.95,1.35,0.)); +#161211 = VECTOR('',#161212,1.); +#161212 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#161213 = PLANE('',#161214); +#161214 = AXIS2_PLACEMENT_3D('',#161215,#161216,#161217); +#161215 = CARTESIAN_POINT('',(-0.95,1.35,0.)); +#161216 = DIRECTION('',(0.,0.,1.)); +#161217 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#161218 = ADVANCED_FACE('',(#161219),#161246,.F.); +#161219 = FACE_BOUND('',#161220,.F.); +#161220 = EDGE_LOOP('',(#161221,#161229,#161237,#161243,#161244,#161245) + ); +#161221 = ORIENTED_EDGE('',*,*,#161222,.T.); +#161222 = EDGE_CURVE('',#160889,#161223,#161225,.T.); +#161223 = VERTEX_POINT('',#161224); +#161224 = CARTESIAN_POINT('',(-0.95,-0.25,4.1)); +#161225 = LINE('',#161226,#161227); +#161226 = CARTESIAN_POINT('',(-0.95,-0.25,0.3)); +#161227 = VECTOR('',#161228,1.); +#161228 = DIRECTION('',(0.,0.,1.)); +#161229 = ORIENTED_EDGE('',*,*,#161230,.T.); +#161230 = EDGE_CURVE('',#161223,#161231,#161233,.T.); +#161231 = VERTEX_POINT('',#161232); +#161232 = CARTESIAN_POINT('',(-0.95,1.35,3.2)); +#161233 = LINE('',#161234,#161235); +#161234 = CARTESIAN_POINT('',(-0.95,-0.25,4.1)); +#161235 = VECTOR('',#161236,1.); +#161236 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#161237 = ORIENTED_EDGE('',*,*,#161238,.T.); +#161238 = EDGE_CURVE('',#161231,#161199,#161239,.T.); +#161239 = LINE('',#161240,#161241); +#161240 = CARTESIAN_POINT('',(-0.95,1.35,3.2)); +#161241 = VECTOR('',#161242,1.); +#161242 = DIRECTION('',(-0.,0.,-1.)); +#161243 = ORIENTED_EDGE('',*,*,#161208,.T.); +#161244 = ORIENTED_EDGE('',*,*,#160493,.T.); +#161245 = ORIENTED_EDGE('',*,*,#160898,.T.); +#161246 = PLANE('',#161247); +#161247 = AXIS2_PLACEMENT_3D('',#161248,#161249,#161250); +#161248 = CARTESIAN_POINT('',(-0.95,-1.566489992801,0.968760807125)); +#161249 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161250 = DIRECTION('',(0.,0.,1.)); +#161251 = ADVANCED_FACE('',(#161252),#161357,.F.); +#161252 = FACE_BOUND('',#161253,.F.); +#161253 = EDGE_LOOP('',(#161254,#161255,#161256,#161264,#161272,#161280, + #161288,#161296,#161304,#161312,#161320,#161326,#161327,#161335, + #161343,#161351)); +#161254 = ORIENTED_EDGE('',*,*,#160861,.F.); +#161255 = ORIENTED_EDGE('',*,*,#160524,.T.); +#161256 = ORIENTED_EDGE('',*,*,#161257,.T.); +#161257 = EDGE_CURVE('',#160517,#161258,#161260,.T.); +#161258 = VERTEX_POINT('',#161259); +#161259 = CARTESIAN_POINT('',(3.4,-2.05,4.2)); +#161260 = LINE('',#161261,#161262); +#161261 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#161262 = VECTOR('',#161263,1.); +#161263 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161264 = ORIENTED_EDGE('',*,*,#161265,.F.); +#161265 = EDGE_CURVE('',#161266,#161258,#161268,.T.); +#161266 = VERTEX_POINT('',#161267); +#161267 = CARTESIAN_POINT('',(3.4,-4.45,4.2)); +#161268 = LINE('',#161269,#161270); +#161269 = CARTESIAN_POINT('',(3.4,-4.45,4.2)); +#161270 = VECTOR('',#161271,1.); +#161271 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161272 = ORIENTED_EDGE('',*,*,#161273,.F.); +#161273 = EDGE_CURVE('',#161274,#161266,#161276,.T.); +#161274 = VERTEX_POINT('',#161275); +#161275 = CARTESIAN_POINT('',(2.4,-4.45,4.2)); +#161276 = LINE('',#161277,#161278); +#161277 = CARTESIAN_POINT('',(2.4,-4.45,4.2)); +#161278 = VECTOR('',#161279,1.); +#161279 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161280 = ORIENTED_EDGE('',*,*,#161281,.F.); +#161281 = EDGE_CURVE('',#161282,#161274,#161284,.T.); +#161282 = VERTEX_POINT('',#161283); +#161283 = CARTESIAN_POINT('',(2.4,-2.05,4.2)); +#161284 = LINE('',#161285,#161286); +#161285 = CARTESIAN_POINT('',(2.4,-0.25,4.2)); +#161286 = VECTOR('',#161287,1.); +#161287 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161288 = ORIENTED_EDGE('',*,*,#161289,.T.); +#161289 = EDGE_CURVE('',#161282,#161290,#161292,.T.); +#161290 = VERTEX_POINT('',#161291); +#161291 = CARTESIAN_POINT('',(-0.4,-2.05,4.2)); +#161292 = LINE('',#161293,#161294); +#161293 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#161294 = VECTOR('',#161295,1.); +#161295 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161296 = ORIENTED_EDGE('',*,*,#161297,.T.); +#161297 = EDGE_CURVE('',#161290,#161298,#161300,.T.); +#161298 = VERTEX_POINT('',#161299); +#161299 = CARTESIAN_POINT('',(-0.4,-4.45,4.2)); +#161300 = LINE('',#161301,#161302); +#161301 = CARTESIAN_POINT('',(-0.4,-0.25,4.2)); +#161302 = VECTOR('',#161303,1.); +#161303 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161304 = ORIENTED_EDGE('',*,*,#161305,.T.); +#161305 = EDGE_CURVE('',#161298,#161306,#161308,.T.); +#161306 = VERTEX_POINT('',#161307); +#161307 = CARTESIAN_POINT('',(-1.4,-4.45,4.2)); +#161308 = LINE('',#161309,#161310); +#161309 = CARTESIAN_POINT('',(-0.4,-4.45,4.2)); +#161310 = VECTOR('',#161311,1.); +#161311 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161312 = ORIENTED_EDGE('',*,*,#161313,.T.); +#161313 = EDGE_CURVE('',#161306,#161314,#161316,.T.); +#161314 = VERTEX_POINT('',#161315); +#161315 = CARTESIAN_POINT('',(-1.4,-2.05,4.2)); +#161316 = LINE('',#161317,#161318); +#161317 = CARTESIAN_POINT('',(-1.4,-4.45,4.2)); +#161318 = VECTOR('',#161319,1.); +#161319 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161320 = ORIENTED_EDGE('',*,*,#161321,.T.); +#161321 = EDGE_CURVE('',#161314,#161055,#161322,.T.); +#161322 = LINE('',#161323,#161324); +#161323 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#161324 = VECTOR('',#161325,1.); +#161325 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161326 = ORIENTED_EDGE('',*,*,#161054,.F.); +#161327 = ORIENTED_EDGE('',*,*,#161328,.F.); +#161328 = EDGE_CURVE('',#161329,#161045,#161331,.T.); +#161329 = VERTEX_POINT('',#161330); +#161330 = CARTESIAN_POINT('',(0.55,-6.25,4.2)); +#161331 = LINE('',#161332,#161333); +#161332 = CARTESIAN_POINT('',(3.45,-6.25,4.2)); +#161333 = VECTOR('',#161334,1.); +#161334 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161335 = ORIENTED_EDGE('',*,*,#161336,.F.); +#161336 = EDGE_CURVE('',#161337,#161329,#161339,.T.); +#161337 = VERTEX_POINT('',#161338); +#161338 = CARTESIAN_POINT('',(0.55,-2.35,4.2)); +#161339 = LINE('',#161340,#161341); +#161340 = CARTESIAN_POINT('',(0.55,-4.3,4.2)); +#161341 = VECTOR('',#161342,1.); +#161342 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161343 = ORIENTED_EDGE('',*,*,#161344,.F.); +#161344 = EDGE_CURVE('',#161345,#161337,#161347,.T.); +#161345 = VERTEX_POINT('',#161346); +#161346 = CARTESIAN_POINT('',(1.45,-2.35,4.2)); +#161347 = LINE('',#161348,#161349); +#161348 = CARTESIAN_POINT('',(2.45,-2.35,4.2)); +#161349 = VECTOR('',#161350,1.); +#161350 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161351 = ORIENTED_EDGE('',*,*,#161352,.F.); +#161352 = EDGE_CURVE('',#160854,#161345,#161353,.T.); +#161353 = LINE('',#161354,#161355); +#161354 = CARTESIAN_POINT('',(1.45,-6.25,4.2)); +#161355 = VECTOR('',#161356,1.); +#161356 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161357 = PLANE('',#161358); +#161358 = AXIS2_PLACEMENT_3D('',#161359,#161360,#161361); +#161359 = CARTESIAN_POINT('',(3.45,-6.25,4.2)); +#161360 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161361 = DIRECTION('',(-1.,1.224646799147E-16,6.927121900793E-45)); +#161362 = ADVANCED_FACE('',(#161363,#161406,#161440),#161474,.T.); +#161363 = FACE_BOUND('',#161364,.T.); +#161364 = EDGE_LOOP('',(#161365,#161366,#161367,#161373,#161374,#161380, + #161381,#161382,#161383,#161391,#161399,#161405)); +#161365 = ORIENTED_EDGE('',*,*,#160516,.T.); +#161366 = ORIENTED_EDGE('',*,*,#161257,.T.); +#161367 = ORIENTED_EDGE('',*,*,#161368,.T.); +#161368 = EDGE_CURVE('',#161258,#161282,#161369,.T.); +#161369 = LINE('',#161370,#161371); +#161370 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#161371 = VECTOR('',#161372,1.); +#161372 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161373 = ORIENTED_EDGE('',*,*,#161289,.T.); +#161374 = ORIENTED_EDGE('',*,*,#161375,.T.); +#161375 = EDGE_CURVE('',#161290,#161314,#161376,.T.); +#161376 = LINE('',#161377,#161378); +#161377 = CARTESIAN_POINT('',(3.45,-2.05,4.2)); +#161378 = VECTOR('',#161379,1.); +#161379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161380 = ORIENTED_EDGE('',*,*,#161321,.T.); +#161381 = ORIENTED_EDGE('',*,*,#161062,.T.); +#161382 = ORIENTED_EDGE('',*,*,#160997,.T.); +#161383 = ORIENTED_EDGE('',*,*,#161384,.F.); +#161384 = EDGE_CURVE('',#161385,#160998,#161387,.T.); +#161385 = VERTEX_POINT('',#161386); +#161386 = CARTESIAN_POINT('',(0.8,-2.05,1.1)); +#161387 = LINE('',#161388,#161389); +#161388 = CARTESIAN_POINT('',(0.8,-2.05,1.1)); +#161389 = VECTOR('',#161390,1.); +#161390 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161391 = ORIENTED_EDGE('',*,*,#161392,.F.); +#161392 = EDGE_CURVE('',#161393,#161385,#161395,.T.); +#161393 = VERTEX_POINT('',#161394); +#161394 = CARTESIAN_POINT('',(1.2,-2.05,1.1)); +#161395 = LINE('',#161396,#161397); +#161396 = CARTESIAN_POINT('',(1.2,-2.05,1.1)); +#161397 = VECTOR('',#161398,1.); +#161398 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161399 = ORIENTED_EDGE('',*,*,#161400,.F.); +#161400 = EDGE_CURVE('',#161022,#161393,#161401,.T.); +#161401 = LINE('',#161402,#161403); +#161402 = CARTESIAN_POINT('',(1.2,-2.05,0.8)); +#161403 = VECTOR('',#161404,1.); +#161404 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161405 = ORIENTED_EDGE('',*,*,#161029,.T.); +#161406 = FACE_BOUND('',#161407,.T.); +#161407 = EDGE_LOOP('',(#161408,#161418,#161426,#161434)); +#161408 = ORIENTED_EDGE('',*,*,#161409,.T.); +#161409 = EDGE_CURVE('',#161410,#161412,#161414,.T.); +#161410 = VERTEX_POINT('',#161411); +#161411 = CARTESIAN_POINT('',(0.25,-2.05,3.35)); +#161412 = VERTEX_POINT('',#161413); +#161413 = CARTESIAN_POINT('',(0.25,-2.05,2.85)); +#161414 = LINE('',#161415,#161416); +#161415 = CARTESIAN_POINT('',(0.25,-2.05,1.901106711288)); +#161416 = VECTOR('',#161417,1.); +#161417 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161418 = ORIENTED_EDGE('',*,*,#161419,.T.); +#161419 = EDGE_CURVE('',#161412,#161420,#161422,.T.); +#161420 = VERTEX_POINT('',#161421); +#161421 = CARTESIAN_POINT('',(-0.25,-2.05,2.85)); +#161422 = LINE('',#161423,#161424); +#161423 = CARTESIAN_POINT('',(0.625,-2.05,2.85)); +#161424 = VECTOR('',#161425,1.); +#161425 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161426 = ORIENTED_EDGE('',*,*,#161427,.F.); +#161427 = EDGE_CURVE('',#161428,#161420,#161430,.T.); +#161428 = VERTEX_POINT('',#161429); +#161429 = CARTESIAN_POINT('',(-0.25,-2.05,3.35)); +#161430 = LINE('',#161431,#161432); +#161431 = CARTESIAN_POINT('',(-0.25,-2.05,1.901106711288)); +#161432 = VECTOR('',#161433,1.); +#161433 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161434 = ORIENTED_EDGE('',*,*,#161435,.T.); +#161435 = EDGE_CURVE('',#161428,#161410,#161436,.T.); +#161436 = LINE('',#161437,#161438); +#161437 = CARTESIAN_POINT('',(0.625,-2.05,3.35)); +#161438 = VECTOR('',#161439,1.); +#161439 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161440 = FACE_BOUND('',#161441,.T.); +#161441 = EDGE_LOOP('',(#161442,#161452,#161460,#161468)); +#161442 = ORIENTED_EDGE('',*,*,#161443,.T.); +#161443 = EDGE_CURVE('',#161444,#161446,#161448,.T.); +#161444 = VERTEX_POINT('',#161445); +#161445 = CARTESIAN_POINT('',(2.25,-2.05,3.35)); +#161446 = VERTEX_POINT('',#161447); +#161447 = CARTESIAN_POINT('',(2.25,-2.05,2.85)); +#161448 = LINE('',#161449,#161450); +#161449 = CARTESIAN_POINT('',(2.25,-2.05,1.901106711288)); +#161450 = VECTOR('',#161451,1.); +#161451 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161452 = ORIENTED_EDGE('',*,*,#161453,.T.); +#161453 = EDGE_CURVE('',#161446,#161454,#161456,.T.); +#161454 = VERTEX_POINT('',#161455); +#161455 = CARTESIAN_POINT('',(1.75,-2.05,2.85)); +#161456 = LINE('',#161457,#161458); +#161457 = CARTESIAN_POINT('',(1.625,-2.05,2.85)); +#161458 = VECTOR('',#161459,1.); +#161459 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161460 = ORIENTED_EDGE('',*,*,#161461,.F.); +#161461 = EDGE_CURVE('',#161462,#161454,#161464,.T.); +#161462 = VERTEX_POINT('',#161463); +#161463 = CARTESIAN_POINT('',(1.75,-2.05,3.35)); +#161464 = LINE('',#161465,#161466); +#161465 = CARTESIAN_POINT('',(1.75,-2.05,1.901106711288)); +#161466 = VECTOR('',#161467,1.); +#161467 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161468 = ORIENTED_EDGE('',*,*,#161469,.T.); +#161469 = EDGE_CURVE('',#161462,#161444,#161470,.T.); +#161470 = LINE('',#161471,#161472); +#161471 = CARTESIAN_POINT('',(1.625,-2.05,3.35)); +#161472 = VECTOR('',#161473,1.); +#161473 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161474 = PLANE('',#161475); +#161475 = AXIS2_PLACEMENT_3D('',#161476,#161477,#161478); +#161476 = CARTESIAN_POINT('',(1.,-2.05,2.5)); +#161477 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161478 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#161479 = ADVANCED_FACE('',(#161480),#161514,.F.); +#161480 = FACE_BOUND('',#161481,.F.); +#161481 = EDGE_LOOP('',(#161482,#161483,#161491,#161499,#161507,#161513) + ); +#161482 = ORIENTED_EDGE('',*,*,#160653,.T.); +#161483 = ORIENTED_EDGE('',*,*,#161484,.T.); +#161484 = EDGE_CURVE('',#160656,#161485,#161487,.T.); +#161485 = VERTEX_POINT('',#161486); +#161486 = CARTESIAN_POINT('',(2.75,-0.4,4.2)); +#161487 = LINE('',#161488,#161489); +#161488 = CARTESIAN_POINT('',(2.75,-1.335399017773,4.2)); +#161489 = VECTOR('',#161490,1.); +#161490 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161491 = ORIENTED_EDGE('',*,*,#161492,.T.); +#161492 = EDGE_CURVE('',#161485,#161493,#161495,.T.); +#161493 = VERTEX_POINT('',#161494); +#161494 = CARTESIAN_POINT('',(2.75,-0.35,3.6)); +#161495 = LINE('',#161496,#161497); +#161496 = CARTESIAN_POINT('',(2.75,-0.45,4.8)); +#161497 = VECTOR('',#161498,1.); +#161498 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161499 = ORIENTED_EDGE('',*,*,#161500,.T.); +#161500 = EDGE_CURVE('',#161493,#161501,#161503,.T.); +#161501 = VERTEX_POINT('',#161502); +#161502 = CARTESIAN_POINT('',(2.75,-0.35,2.6)); +#161503 = LINE('',#161504,#161505); +#161504 = CARTESIAN_POINT('',(2.75,-0.35,3.6)); +#161505 = VECTOR('',#161506,1.); +#161506 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161507 = ORIENTED_EDGE('',*,*,#161508,.T.); +#161508 = EDGE_CURVE('',#161501,#160913,#161509,.T.); +#161509 = LINE('',#161510,#161511); +#161510 = CARTESIAN_POINT('',(2.75,-0.35,2.6)); +#161511 = VECTOR('',#161512,1.); +#161512 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#161513 = ORIENTED_EDGE('',*,*,#160912,.T.); +#161514 = PLANE('',#161515); +#161515 = AXIS2_PLACEMENT_3D('',#161516,#161517,#161518); +#161516 = CARTESIAN_POINT('',(2.75,-0.320798035545,2.550475523299)); +#161517 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161518 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161519 = ADVANCED_FACE('',(#161520),#161545,.T.); +#161520 = FACE_BOUND('',#161521,.T.); +#161521 = EDGE_LOOP('',(#161522,#161523,#161529,#161530,#161531,#161539) + ); +#161522 = ORIENTED_EDGE('',*,*,#161368,.F.); +#161523 = ORIENTED_EDGE('',*,*,#161524,.T.); +#161524 = EDGE_CURVE('',#161258,#160688,#161525,.T.); +#161525 = LINE('',#161526,#161527); +#161526 = CARTESIAN_POINT('',(3.4,-4.45,4.2)); +#161527 = VECTOR('',#161528,1.); +#161528 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161529 = ORIENTED_EDGE('',*,*,#160695,.T.); +#161530 = ORIENTED_EDGE('',*,*,#161484,.T.); +#161531 = ORIENTED_EDGE('',*,*,#161532,.T.); +#161532 = EDGE_CURVE('',#161485,#161533,#161535,.T.); +#161533 = VERTEX_POINT('',#161534); +#161534 = CARTESIAN_POINT('',(2.4,-0.4,4.2)); +#161535 = LINE('',#161536,#161537); +#161536 = CARTESIAN_POINT('',(2.825,-0.4,4.2)); +#161537 = VECTOR('',#161538,1.); +#161538 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161539 = ORIENTED_EDGE('',*,*,#161540,.T.); +#161540 = EDGE_CURVE('',#161533,#161282,#161541,.T.); +#161541 = LINE('',#161542,#161543); +#161542 = CARTESIAN_POINT('',(2.4,-0.25,4.2)); +#161543 = VECTOR('',#161544,1.); +#161544 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161545 = PLANE('',#161546); +#161546 = AXIS2_PLACEMENT_3D('',#161547,#161548,#161549); +#161547 = CARTESIAN_POINT('',(2.9,-2.35,4.2)); +#161548 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161549 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161550 = ADVANCED_FACE('',(#161551),#161563,.F.); +#161551 = FACE_BOUND('',#161552,.T.); +#161552 = EDGE_LOOP('',(#161553,#161554,#161555,#161556,#161557)); +#161553 = ORIENTED_EDGE('',*,*,#160831,.T.); +#161554 = ORIENTED_EDGE('',*,*,#160687,.T.); +#161555 = ORIENTED_EDGE('',*,*,#161524,.F.); +#161556 = ORIENTED_EDGE('',*,*,#161265,.F.); +#161557 = ORIENTED_EDGE('',*,*,#161558,.F.); +#161558 = EDGE_CURVE('',#160824,#161266,#161559,.T.); +#161559 = LINE('',#161560,#161561); +#161560 = CARTESIAN_POINT('',(3.4,-4.45,4.8)); +#161561 = VECTOR('',#161562,1.); +#161562 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161563 = PLANE('',#161564); +#161564 = AXIS2_PLACEMENT_3D('',#161565,#161566,#161567); +#161565 = CARTESIAN_POINT('',(3.4,-4.45,4.8)); +#161566 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161567 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161568 = ADVANCED_FACE('',(#161569),#161580,.F.); +#161569 = FACE_BOUND('',#161570,.F.); +#161570 = EDGE_LOOP('',(#161571,#161572,#161578,#161579)); +#161571 = ORIENTED_EDGE('',*,*,#160823,.F.); +#161572 = ORIENTED_EDGE('',*,*,#161573,.T.); +#161573 = EDGE_CURVE('',#160816,#161274,#161574,.T.); +#161574 = LINE('',#161575,#161576); +#161575 = CARTESIAN_POINT('',(2.4,-4.45,4.8)); +#161576 = VECTOR('',#161577,1.); +#161577 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161578 = ORIENTED_EDGE('',*,*,#161273,.T.); +#161579 = ORIENTED_EDGE('',*,*,#161558,.F.); +#161580 = PLANE('',#161581); +#161581 = AXIS2_PLACEMENT_3D('',#161582,#161583,#161584); +#161582 = CARTESIAN_POINT('',(2.4,-4.45,4.8)); +#161583 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161584 = DIRECTION('',(1.,-1.224646799147E-16,-1.219283680787E-48)); +#161585 = ADVANCED_FACE('',(#161586),#161598,.F.); +#161586 = FACE_BOUND('',#161587,.T.); +#161587 = EDGE_LOOP('',(#161588,#161589,#161590,#161591,#161592)); +#161588 = ORIENTED_EDGE('',*,*,#160815,.T.); +#161589 = ORIENTED_EDGE('',*,*,#161573,.T.); +#161590 = ORIENTED_EDGE('',*,*,#161281,.F.); +#161591 = ORIENTED_EDGE('',*,*,#161540,.F.); +#161592 = ORIENTED_EDGE('',*,*,#161593,.F.); +#161593 = EDGE_CURVE('',#160808,#161533,#161594,.T.); +#161594 = LINE('',#161595,#161596); +#161595 = CARTESIAN_POINT('',(2.4,-0.449310344828,4.791724137931)); +#161596 = VECTOR('',#161597,1.); +#161597 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161598 = PLANE('',#161599); +#161599 = AXIS2_PLACEMENT_3D('',#161600,#161601,#161602); +#161600 = CARTESIAN_POINT('',(2.4,-0.25,4.8)); +#161601 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161602 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161603 = ADVANCED_FACE('',(#161604),#161624,.F.); +#161604 = FACE_BOUND('',#161605,.F.); +#161605 = EDGE_LOOP('',(#161606,#161607,#161608,#161616,#161622,#161623) + ); +#161606 = ORIENTED_EDGE('',*,*,#161593,.F.); +#161607 = ORIENTED_EDGE('',*,*,#160807,.T.); +#161608 = ORIENTED_EDGE('',*,*,#161609,.T.); +#161609 = EDGE_CURVE('',#160800,#161610,#161612,.T.); +#161610 = VERTEX_POINT('',#161611); +#161611 = CARTESIAN_POINT('',(1.25,-0.35,3.6)); +#161612 = LINE('',#161613,#161614); +#161613 = CARTESIAN_POINT('',(1.25,-0.45,4.8)); +#161614 = VECTOR('',#161615,1.); +#161615 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161616 = ORIENTED_EDGE('',*,*,#161617,.F.); +#161617 = EDGE_CURVE('',#161493,#161610,#161618,.T.); +#161618 = LINE('',#161619,#161620); +#161619 = CARTESIAN_POINT('',(2.75,-0.35,3.6)); +#161620 = VECTOR('',#161621,1.); +#161621 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161622 = ORIENTED_EDGE('',*,*,#161492,.F.); +#161623 = ORIENTED_EDGE('',*,*,#161532,.T.); +#161624 = PLANE('',#161625); +#161625 = AXIS2_PLACEMENT_3D('',#161626,#161627,#161628); +#161626 = CARTESIAN_POINT('',(2.75,-0.45,4.8)); +#161627 = DIRECTION('',(-1.220416573038E-16,-0.996545758245, + -8.304547985373E-02)); +#161628 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161629 = ADVANCED_FACE('',(#161630),#161655,.T.); +#161630 = FACE_BOUND('',#161631,.T.); +#161631 = EDGE_LOOP('',(#161632,#161633,#161634,#161642,#161648,#161649) + ); +#161632 = ORIENTED_EDGE('',*,*,#160799,.T.); +#161633 = ORIENTED_EDGE('',*,*,#161609,.T.); +#161634 = ORIENTED_EDGE('',*,*,#161635,.T.); +#161635 = EDGE_CURVE('',#161610,#161636,#161638,.T.); +#161636 = VERTEX_POINT('',#161637); +#161637 = CARTESIAN_POINT('',(1.25,-0.35,2.6)); +#161638 = LINE('',#161639,#161640); +#161639 = CARTESIAN_POINT('',(1.25,-0.35,3.6)); +#161640 = VECTOR('',#161641,1.); +#161641 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161642 = ORIENTED_EDGE('',*,*,#161643,.T.); +#161643 = EDGE_CURVE('',#161636,#160921,#161644,.T.); +#161644 = LINE('',#161645,#161646); +#161645 = CARTESIAN_POINT('',(1.25,-0.35,2.6)); +#161646 = VECTOR('',#161647,1.); +#161647 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#161648 = ORIENTED_EDGE('',*,*,#160928,.T.); +#161649 = ORIENTED_EDGE('',*,*,#161650,.T.); +#161650 = EDGE_CURVE('',#160929,#160792,#161651,.T.); +#161651 = LINE('',#161652,#161653); +#161652 = CARTESIAN_POINT('',(1.25,-0.25,0.3)); +#161653 = VECTOR('',#161654,1.); +#161654 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161655 = PLANE('',#161656); +#161656 = AXIS2_PLACEMENT_3D('',#161657,#161658,#161659); +#161657 = CARTESIAN_POINT('',(1.25,-0.320798035545,2.550475523299)); +#161658 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161659 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161660 = ADVANCED_FACE('',(#161661),#161672,.F.); +#161661 = FACE_BOUND('',#161662,.F.); +#161662 = EDGE_LOOP('',(#161663,#161664,#161665,#161666)); +#161663 = ORIENTED_EDGE('',*,*,#160936,.T.); +#161664 = ORIENTED_EDGE('',*,*,#161650,.T.); +#161665 = ORIENTED_EDGE('',*,*,#160791,.T.); +#161666 = ORIENTED_EDGE('',*,*,#161667,.F.); +#161667 = EDGE_CURVE('',#160937,#160784,#161668,.T.); +#161668 = LINE('',#161669,#161670); +#161669 = CARTESIAN_POINT('',(0.75,-0.25,0.3)); +#161670 = VECTOR('',#161671,1.); +#161671 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161672 = PLANE('',#161673); +#161673 = AXIS2_PLACEMENT_3D('',#161674,#161675,#161676); +#161674 = CARTESIAN_POINT('',(1.,-0.25,2.55)); +#161675 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161676 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#161677 = ADVANCED_FACE('',(#161678),#161705,.F.); +#161678 = FACE_BOUND('',#161679,.F.); +#161679 = EDGE_LOOP('',(#161680,#161681,#161689,#161697,#161703,#161704) + ); +#161680 = ORIENTED_EDGE('',*,*,#160783,.T.); +#161681 = ORIENTED_EDGE('',*,*,#161682,.T.); +#161682 = EDGE_CURVE('',#160776,#161683,#161685,.T.); +#161683 = VERTEX_POINT('',#161684); +#161684 = CARTESIAN_POINT('',(0.75,-0.35,3.6)); +#161685 = LINE('',#161686,#161687); +#161686 = CARTESIAN_POINT('',(0.75,-0.45,4.8)); +#161687 = VECTOR('',#161688,1.); +#161688 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161689 = ORIENTED_EDGE('',*,*,#161690,.T.); +#161690 = EDGE_CURVE('',#161683,#161691,#161693,.T.); +#161691 = VERTEX_POINT('',#161692); +#161692 = CARTESIAN_POINT('',(0.75,-0.35,2.6)); +#161693 = LINE('',#161694,#161695); +#161694 = CARTESIAN_POINT('',(0.75,-0.35,3.6)); +#161695 = VECTOR('',#161696,1.); +#161696 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161697 = ORIENTED_EDGE('',*,*,#161698,.T.); +#161698 = EDGE_CURVE('',#161691,#160945,#161699,.T.); +#161699 = LINE('',#161700,#161701); +#161700 = CARTESIAN_POINT('',(0.75,-0.35,2.6)); +#161701 = VECTOR('',#161702,1.); +#161702 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#161703 = ORIENTED_EDGE('',*,*,#160944,.T.); +#161704 = ORIENTED_EDGE('',*,*,#161667,.T.); +#161705 = PLANE('',#161706); +#161706 = AXIS2_PLACEMENT_3D('',#161707,#161708,#161709); +#161707 = CARTESIAN_POINT('',(0.75,-0.320798035545,2.550475523299)); +#161708 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161709 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161710 = ADVANCED_FACE('',(#161711),#161745,.F.); +#161711 = FACE_BOUND('',#161712,.F.); +#161712 = EDGE_LOOP('',(#161713,#161714,#161715,#161723,#161731,#161739) + ); +#161713 = ORIENTED_EDGE('',*,*,#161682,.F.); +#161714 = ORIENTED_EDGE('',*,*,#160775,.T.); +#161715 = ORIENTED_EDGE('',*,*,#161716,.T.); +#161716 = EDGE_CURVE('',#160768,#161717,#161719,.T.); +#161717 = VERTEX_POINT('',#161718); +#161718 = CARTESIAN_POINT('',(-0.4,-0.4,4.2)); +#161719 = LINE('',#161720,#161721); +#161720 = CARTESIAN_POINT('',(-0.4,-0.449310344828,4.791724137931)); +#161721 = VECTOR('',#161722,1.); +#161722 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161723 = ORIENTED_EDGE('',*,*,#161724,.F.); +#161724 = EDGE_CURVE('',#161725,#161717,#161727,.T.); +#161725 = VERTEX_POINT('',#161726); +#161726 = CARTESIAN_POINT('',(-0.75,-0.4,4.2)); +#161727 = LINE('',#161728,#161729); +#161728 = CARTESIAN_POINT('',(-7.5E-02,-0.4,4.2)); +#161729 = VECTOR('',#161730,1.); +#161730 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#161731 = ORIENTED_EDGE('',*,*,#161732,.T.); +#161732 = EDGE_CURVE('',#161725,#161733,#161735,.T.); +#161733 = VERTEX_POINT('',#161734); +#161734 = CARTESIAN_POINT('',(-0.75,-0.35,3.6)); +#161735 = LINE('',#161736,#161737); +#161736 = CARTESIAN_POINT('',(-0.75,-0.45,4.8)); +#161737 = VECTOR('',#161738,1.); +#161738 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161739 = ORIENTED_EDGE('',*,*,#161740,.F.); +#161740 = EDGE_CURVE('',#161683,#161733,#161741,.T.); +#161741 = LINE('',#161742,#161743); +#161742 = CARTESIAN_POINT('',(0.75,-0.35,3.6)); +#161743 = VECTOR('',#161744,1.); +#161744 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161745 = PLANE('',#161746); +#161746 = AXIS2_PLACEMENT_3D('',#161747,#161748,#161749); +#161747 = CARTESIAN_POINT('',(0.75,-0.45,4.8)); +#161748 = DIRECTION('',(-1.220416573038E-16,-0.996545758245, + -8.304547985373E-02)); +#161749 = DIRECTION('',(1.017013810865E-17,8.304547985373E-02, + -0.996545758245)); +#161750 = ADVANCED_FACE('',(#161751),#161768,.T.); +#161751 = FACE_BOUND('',#161752,.T.); +#161752 = EDGE_LOOP('',(#161753,#161754,#161755,#161761,#161762)); +#161753 = ORIENTED_EDGE('',*,*,#160767,.F.); +#161754 = ORIENTED_EDGE('',*,*,#161716,.T.); +#161755 = ORIENTED_EDGE('',*,*,#161756,.T.); +#161756 = EDGE_CURVE('',#161717,#161290,#161757,.T.); +#161757 = LINE('',#161758,#161759); +#161758 = CARTESIAN_POINT('',(-0.4,-0.25,4.2)); +#161759 = VECTOR('',#161760,1.); +#161760 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161761 = ORIENTED_EDGE('',*,*,#161297,.T.); +#161762 = ORIENTED_EDGE('',*,*,#161763,.F.); +#161763 = EDGE_CURVE('',#160760,#161298,#161764,.T.); +#161764 = LINE('',#161765,#161766); +#161765 = CARTESIAN_POINT('',(-0.4,-4.45,4.8)); +#161766 = VECTOR('',#161767,1.); +#161767 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161768 = PLANE('',#161769); +#161769 = AXIS2_PLACEMENT_3D('',#161770,#161771,#161772); +#161770 = CARTESIAN_POINT('',(-0.4,-0.25,4.8)); +#161771 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161772 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161773 = ADVANCED_FACE('',(#161774),#161817,.T.); +#161774 = FACE_BOUND('',#161775,.T.); +#161775 = EDGE_LOOP('',(#161776,#161777,#161778,#161779,#161787,#161795, + #161803,#161811)); +#161776 = ORIENTED_EDGE('',*,*,#160759,.F.); +#161777 = ORIENTED_EDGE('',*,*,#161763,.T.); +#161778 = ORIENTED_EDGE('',*,*,#161305,.T.); +#161779 = ORIENTED_EDGE('',*,*,#161780,.F.); +#161780 = EDGE_CURVE('',#161781,#161306,#161783,.T.); +#161781 = VERTEX_POINT('',#161782); +#161782 = CARTESIAN_POINT('',(-1.4,-4.45,4.8)); +#161783 = LINE('',#161784,#161785); +#161784 = CARTESIAN_POINT('',(-1.4,-4.45,4.8)); +#161785 = VECTOR('',#161786,1.); +#161786 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161787 = ORIENTED_EDGE('',*,*,#161788,.F.); +#161788 = EDGE_CURVE('',#161789,#161781,#161791,.T.); +#161789 = VERTEX_POINT('',#161790); +#161790 = CARTESIAN_POINT('',(-0.95,-4.45,4.8)); +#161791 = LINE('',#161792,#161793); +#161792 = CARTESIAN_POINT('',(-0.4,-4.45,4.8)); +#161793 = VECTOR('',#161794,1.); +#161794 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161795 = ORIENTED_EDGE('',*,*,#161796,.F.); +#161796 = EDGE_CURVE('',#161797,#161789,#161799,.T.); +#161797 = VERTEX_POINT('',#161798); +#161798 = CARTESIAN_POINT('',(-0.95,-4.45,4.85)); +#161799 = LINE('',#161800,#161801); +#161800 = CARTESIAN_POINT('',(-0.95,-4.45,4.85)); +#161801 = VECTOR('',#161802,1.); +#161802 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161803 = ORIENTED_EDGE('',*,*,#161804,.F.); +#161804 = EDGE_CURVE('',#161805,#161797,#161807,.T.); +#161805 = VERTEX_POINT('',#161806); +#161806 = CARTESIAN_POINT('',(-0.45,-4.45,4.85)); +#161807 = LINE('',#161808,#161809); +#161808 = CARTESIAN_POINT('',(-0.45,-4.45,4.85)); +#161809 = VECTOR('',#161810,1.); +#161810 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161811 = ORIENTED_EDGE('',*,*,#161812,.F.); +#161812 = EDGE_CURVE('',#160752,#161805,#161813,.T.); +#161813 = LINE('',#161814,#161815); +#161814 = CARTESIAN_POINT('',(-0.45,-4.45,4.8)); +#161815 = VECTOR('',#161816,1.); +#161816 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161817 = PLANE('',#161818); +#161818 = AXIS2_PLACEMENT_3D('',#161819,#161820,#161821); +#161819 = CARTESIAN_POINT('',(-0.893939393939,-4.45,4.517424242424)); +#161820 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161821 = DIRECTION('',(1.,-1.224646799147E-16,-2.885949453099E-46)); +#161822 = ADVANCED_FACE('',(#161823),#161841,.F.); +#161823 = FACE_BOUND('',#161824,.F.); +#161824 = EDGE_LOOP('',(#161825,#161826,#161834,#161840)); +#161825 = ORIENTED_EDGE('',*,*,#160751,.T.); +#161826 = ORIENTED_EDGE('',*,*,#161827,.T.); +#161827 = EDGE_CURVE('',#160744,#161828,#161830,.T.); +#161828 = VERTEX_POINT('',#161829); +#161829 = CARTESIAN_POINT('',(-0.45,-6.25,4.85)); +#161830 = LINE('',#161831,#161832); +#161831 = CARTESIAN_POINT('',(-0.45,-6.25,4.8)); +#161832 = VECTOR('',#161833,1.); +#161833 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161834 = ORIENTED_EDGE('',*,*,#161835,.F.); +#161835 = EDGE_CURVE('',#161805,#161828,#161836,.T.); +#161836 = LINE('',#161837,#161838); +#161837 = CARTESIAN_POINT('',(-0.45,-4.45,4.85)); +#161838 = VECTOR('',#161839,1.); +#161839 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161840 = ORIENTED_EDGE('',*,*,#161812,.F.); +#161841 = PLANE('',#161842); +#161842 = AXIS2_PLACEMENT_3D('',#161843,#161844,#161845); +#161843 = CARTESIAN_POINT('',(-0.45,-4.45,4.8)); +#161844 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161845 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#161846 = ADVANCED_FACE('',(#161847),#161888,.T.); +#161847 = FACE_BOUND('',#161848,.T.); +#161848 = EDGE_LOOP('',(#161849,#161855,#161856,#161857,#161865,#161873, + #161879,#161880,#161886,#161887)); +#161849 = ORIENTED_EDGE('',*,*,#161850,.F.); +#161850 = EDGE_CURVE('',#160736,#161329,#161851,.T.); +#161851 = LINE('',#161852,#161853); +#161852 = CARTESIAN_POINT('',(0.55,-6.25,4.8)); +#161853 = VECTOR('',#161854,1.); +#161854 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161855 = ORIENTED_EDGE('',*,*,#160743,.T.); +#161856 = ORIENTED_EDGE('',*,*,#161827,.T.); +#161857 = ORIENTED_EDGE('',*,*,#161858,.T.); +#161858 = EDGE_CURVE('',#161828,#161859,#161861,.T.); +#161859 = VERTEX_POINT('',#161860); +#161860 = CARTESIAN_POINT('',(-0.95,-6.25,4.85)); +#161861 = LINE('',#161862,#161863); +#161862 = CARTESIAN_POINT('',(-0.45,-6.25,4.85)); +#161863 = VECTOR('',#161864,1.); +#161864 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161865 = ORIENTED_EDGE('',*,*,#161866,.T.); +#161866 = EDGE_CURVE('',#161859,#161867,#161869,.T.); +#161867 = VERTEX_POINT('',#161868); +#161868 = CARTESIAN_POINT('',(-0.95,-6.25,4.8)); +#161869 = LINE('',#161870,#161871); +#161870 = CARTESIAN_POINT('',(-0.95,-6.25,4.85)); +#161871 = VECTOR('',#161872,1.); +#161872 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161873 = ORIENTED_EDGE('',*,*,#161874,.T.); +#161874 = EDGE_CURVE('',#161867,#161177,#161875,.T.); +#161875 = LINE('',#161876,#161877); +#161876 = CARTESIAN_POINT('',(3.95,-6.25,4.8)); +#161877 = VECTOR('',#161878,1.); +#161878 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161879 = ORIENTED_EDGE('',*,*,#161176,.T.); +#161880 = ORIENTED_EDGE('',*,*,#161881,.F.); +#161881 = EDGE_CURVE('',#161047,#161169,#161882,.T.); +#161882 = LINE('',#161883,#161884); +#161883 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#161884 = VECTOR('',#161885,1.); +#161885 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161886 = ORIENTED_EDGE('',*,*,#161044,.F.); +#161887 = ORIENTED_EDGE('',*,*,#161328,.F.); +#161888 = PLANE('',#161889); +#161889 = AXIS2_PLACEMENT_3D('',#161890,#161891,#161892); +#161890 = CARTESIAN_POINT('',(-0.922222222222,-6.25,4.28487654321)); +#161891 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161892 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#161893 = ADVANCED_FACE('',(#161894),#161905,.F.); +#161894 = FACE_BOUND('',#161895,.F.); +#161895 = EDGE_LOOP('',(#161896,#161897,#161903,#161904)); +#161896 = ORIENTED_EDGE('',*,*,#160735,.F.); +#161897 = ORIENTED_EDGE('',*,*,#161898,.T.); +#161898 = EDGE_CURVE('',#160728,#161337,#161899,.T.); +#161899 = LINE('',#161900,#161901); +#161900 = CARTESIAN_POINT('',(0.55,-2.35,4.8)); +#161901 = VECTOR('',#161902,1.); +#161902 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161903 = ORIENTED_EDGE('',*,*,#161336,.T.); +#161904 = ORIENTED_EDGE('',*,*,#161850,.F.); +#161905 = PLANE('',#161906); +#161906 = AXIS2_PLACEMENT_3D('',#161907,#161908,#161909); +#161907 = CARTESIAN_POINT('',(0.55,-2.35,4.8)); +#161908 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161909 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161910 = ADVANCED_FACE('',(#161911),#161922,.F.); +#161911 = FACE_BOUND('',#161912,.F.); +#161912 = EDGE_LOOP('',(#161913,#161914,#161920,#161921)); +#161913 = ORIENTED_EDGE('',*,*,#160727,.F.); +#161914 = ORIENTED_EDGE('',*,*,#161915,.T.); +#161915 = EDGE_CURVE('',#160720,#161345,#161916,.T.); +#161916 = LINE('',#161917,#161918); +#161917 = CARTESIAN_POINT('',(1.45,-2.35,4.8)); +#161918 = VECTOR('',#161919,1.); +#161919 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161920 = ORIENTED_EDGE('',*,*,#161344,.T.); +#161921 = ORIENTED_EDGE('',*,*,#161898,.F.); +#161922 = PLANE('',#161923); +#161923 = AXIS2_PLACEMENT_3D('',#161924,#161925,#161926); +#161924 = CARTESIAN_POINT('',(1.45,-2.35,4.8)); +#161925 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161926 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#161927 = ADVANCED_FACE('',(#161928),#161934,.F.); +#161928 = FACE_BOUND('',#161929,.F.); +#161929 = EDGE_LOOP('',(#161930,#161931,#161932,#161933)); +#161930 = ORIENTED_EDGE('',*,*,#160719,.F.); +#161931 = ORIENTED_EDGE('',*,*,#160853,.T.); +#161932 = ORIENTED_EDGE('',*,*,#161352,.T.); +#161933 = ORIENTED_EDGE('',*,*,#161915,.F.); +#161934 = PLANE('',#161935); +#161935 = AXIS2_PLACEMENT_3D('',#161936,#161937,#161938); +#161936 = CARTESIAN_POINT('',(1.45,-6.25,4.8)); +#161937 = DIRECTION('',(1.,-1.224646799147E-16,-0.)); +#161938 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161939 = ADVANCED_FACE('',(#161940),#161981,.F.); +#161940 = FACE_BOUND('',#161941,.F.); +#161941 = EDGE_LOOP('',(#161942,#161950,#161951,#161957,#161958,#161959, + #161967,#161975)); +#161942 = ORIENTED_EDGE('',*,*,#161943,.T.); +#161943 = EDGE_CURVE('',#161944,#161126,#161946,.T.); +#161944 = VERTEX_POINT('',#161945); +#161945 = CARTESIAN_POINT('',(-1.4,-0.25,4.8)); +#161946 = LINE('',#161947,#161948); +#161947 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#161948 = VECTOR('',#161949,1.); +#161949 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161950 = ORIENTED_EDGE('',*,*,#161125,.T.); +#161951 = ORIENTED_EDGE('',*,*,#161952,.F.); +#161952 = EDGE_CURVE('',#161223,#161128,#161953,.T.); +#161953 = LINE('',#161954,#161955); +#161954 = CARTESIAN_POINT('',(-0.95,-0.25,4.1)); +#161955 = VECTOR('',#161956,1.); +#161956 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#161957 = ORIENTED_EDGE('',*,*,#161222,.F.); +#161958 = ORIENTED_EDGE('',*,*,#160888,.T.); +#161959 = ORIENTED_EDGE('',*,*,#161960,.T.); +#161960 = EDGE_CURVE('',#160891,#161961,#161963,.T.); +#161961 = VERTEX_POINT('',#161962); +#161962 = CARTESIAN_POINT('',(-0.75,-0.25,4.2)); +#161963 = LINE('',#161964,#161965); +#161964 = CARTESIAN_POINT('',(-0.75,-0.25,0.3)); +#161965 = VECTOR('',#161966,1.); +#161966 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#161967 = ORIENTED_EDGE('',*,*,#161968,.F.); +#161968 = EDGE_CURVE('',#161969,#161961,#161971,.T.); +#161969 = VERTEX_POINT('',#161970); +#161970 = CARTESIAN_POINT('',(-1.4,-0.25,4.2)); +#161971 = LINE('',#161972,#161973); +#161972 = CARTESIAN_POINT('',(-1.4,-0.25,4.2)); +#161973 = VECTOR('',#161974,1.); +#161974 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#161975 = ORIENTED_EDGE('',*,*,#161976,.F.); +#161976 = EDGE_CURVE('',#161944,#161969,#161977,.T.); +#161977 = LINE('',#161978,#161979); +#161978 = CARTESIAN_POINT('',(-1.4,-0.25,4.8)); +#161979 = VECTOR('',#161980,1.); +#161980 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#161981 = PLANE('',#161982); +#161982 = AXIS2_PLACEMENT_3D('',#161983,#161984,#161985); +#161983 = CARTESIAN_POINT('',(1.,-0.25,2.55)); +#161984 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#161985 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#161986 = ADVANCED_FACE('',(#161987),#162012,.T.); +#161987 = FACE_BOUND('',#161988,.T.); +#161988 = EDGE_LOOP('',(#161989,#161990,#161996,#161997,#162005,#162011) + ); +#161989 = ORIENTED_EDGE('',*,*,#161960,.T.); +#161990 = ORIENTED_EDGE('',*,*,#161991,.F.); +#161991 = EDGE_CURVE('',#161725,#161961,#161992,.T.); +#161992 = LINE('',#161993,#161994); +#161993 = CARTESIAN_POINT('',(-0.75,-1.335399017773,4.2)); +#161994 = VECTOR('',#161995,1.); +#161995 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#161996 = ORIENTED_EDGE('',*,*,#161732,.T.); +#161997 = ORIENTED_EDGE('',*,*,#161998,.T.); +#161998 = EDGE_CURVE('',#161733,#161999,#162001,.T.); +#161999 = VERTEX_POINT('',#162000); +#162000 = CARTESIAN_POINT('',(-0.75,-0.35,2.6)); +#162001 = LINE('',#162002,#162003); +#162002 = CARTESIAN_POINT('',(-0.75,-0.35,3.6)); +#162003 = VECTOR('',#162004,1.); +#162004 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162005 = ORIENTED_EDGE('',*,*,#162006,.T.); +#162006 = EDGE_CURVE('',#161999,#160953,#162007,.T.); +#162007 = LINE('',#162008,#162009); +#162008 = CARTESIAN_POINT('',(-0.75,-0.35,2.6)); +#162009 = VECTOR('',#162010,1.); +#162010 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#162011 = ORIENTED_EDGE('',*,*,#160960,.T.); +#162012 = PLANE('',#162013); +#162013 = AXIS2_PLACEMENT_3D('',#162014,#162015,#162016); +#162014 = CARTESIAN_POINT('',(-0.75,-0.320798035545,2.550475523299)); +#162015 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162016 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#162017 = ADVANCED_FACE('',(#162018),#162029,.F.); +#162018 = FACE_BOUND('',#162019,.F.); +#162019 = EDGE_LOOP('',(#162020,#162026,#162027,#162028)); +#162020 = ORIENTED_EDGE('',*,*,#162021,.T.); +#162021 = EDGE_CURVE('',#161691,#161999,#162022,.T.); +#162022 = LINE('',#162023,#162024); +#162023 = CARTESIAN_POINT('',(0.75,-0.35,2.6)); +#162024 = VECTOR('',#162025,1.); +#162025 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162026 = ORIENTED_EDGE('',*,*,#162006,.T.); +#162027 = ORIENTED_EDGE('',*,*,#160952,.F.); +#162028 = ORIENTED_EDGE('',*,*,#161698,.F.); +#162029 = PLANE('',#162030); +#162030 = AXIS2_PLACEMENT_3D('',#162031,#162032,#162033); +#162031 = CARTESIAN_POINT('',(0.75,-0.35,2.6)); +#162032 = DIRECTION('',(-1.223490926498E-16,-0.999056158355, + 4.343722427631E-02)); +#162033 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#162034 = ADVANCED_FACE('',(#162035),#162046,.F.); +#162035 = FACE_BOUND('',#162036,.F.); +#162036 = EDGE_LOOP('',(#162037,#162043,#162044,#162045)); +#162037 = ORIENTED_EDGE('',*,*,#162038,.T.); +#162038 = EDGE_CURVE('',#161501,#161636,#162039,.T.); +#162039 = LINE('',#162040,#162041); +#162040 = CARTESIAN_POINT('',(2.75,-0.35,2.6)); +#162041 = VECTOR('',#162042,1.); +#162042 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162043 = ORIENTED_EDGE('',*,*,#161643,.T.); +#162044 = ORIENTED_EDGE('',*,*,#160920,.F.); +#162045 = ORIENTED_EDGE('',*,*,#161508,.F.); +#162046 = PLANE('',#162047); +#162047 = AXIS2_PLACEMENT_3D('',#162048,#162049,#162050); +#162048 = CARTESIAN_POINT('',(2.75,-0.35,2.6)); +#162049 = DIRECTION('',(-1.223490926498E-16,-0.999056158355, + 4.343722427631E-02)); +#162050 = DIRECTION('',(-5.319525767383E-18,-4.343722427631E-02, + -0.999056158355)); +#162051 = ADVANCED_FACE('',(#162052),#162070,.F.); +#162052 = FACE_BOUND('',#162053,.F.); +#162053 = EDGE_LOOP('',(#162054,#162055,#162063,#162069)); +#162054 = ORIENTED_EDGE('',*,*,#161021,.T.); +#162055 = ORIENTED_EDGE('',*,*,#162056,.T.); +#162056 = EDGE_CURVE('',#161014,#162057,#162059,.T.); +#162057 = VERTEX_POINT('',#162058); +#162058 = CARTESIAN_POINT('',(1.2,-3.95,1.1)); +#162059 = LINE('',#162060,#162061); +#162060 = CARTESIAN_POINT('',(1.2,-3.95,0.8)); +#162061 = VECTOR('',#162062,1.); +#162062 = DIRECTION('',(1.359631073447E-32,1.110223024625E-16,1.)); +#162063 = ORIENTED_EDGE('',*,*,#162064,.F.); +#162064 = EDGE_CURVE('',#161393,#162057,#162065,.T.); +#162065 = LINE('',#162066,#162067); +#162066 = CARTESIAN_POINT('',(1.2,-2.05,1.1)); +#162067 = VECTOR('',#162068,1.); +#162068 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162069 = ORIENTED_EDGE('',*,*,#161400,.F.); +#162070 = PLANE('',#162071); +#162071 = AXIS2_PLACEMENT_3D('',#162072,#162073,#162074); +#162072 = CARTESIAN_POINT('',(1.2,-2.05,0.8)); +#162073 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162074 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#162075 = ADVANCED_FACE('',(#162076),#162094,.T.); +#162076 = FACE_BOUND('',#162077,.T.); +#162077 = EDGE_LOOP('',(#162078,#162086,#162092,#162093)); +#162078 = ORIENTED_EDGE('',*,*,#162079,.T.); +#162079 = EDGE_CURVE('',#162057,#162080,#162082,.T.); +#162080 = VERTEX_POINT('',#162081); +#162081 = CARTESIAN_POINT('',(0.8,-3.95,1.1)); +#162082 = LINE('',#162083,#162084); +#162083 = CARTESIAN_POINT('',(1.2,-3.95,1.1)); +#162084 = VECTOR('',#162085,1.); +#162085 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162086 = ORIENTED_EDGE('',*,*,#162087,.T.); +#162087 = EDGE_CURVE('',#162080,#161006,#162088,.T.); +#162088 = LINE('',#162089,#162090); +#162089 = CARTESIAN_POINT('',(0.8,-3.95,1.1)); +#162090 = VECTOR('',#162091,1.); +#162091 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162092 = ORIENTED_EDGE('',*,*,#161013,.T.); +#162093 = ORIENTED_EDGE('',*,*,#162056,.T.); +#162094 = PLANE('',#162095); +#162095 = AXIS2_PLACEMENT_3D('',#162096,#162097,#162098); +#162096 = CARTESIAN_POINT('',(1.,-3.95,0.95)); +#162097 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162098 = DIRECTION('',(-1.,1.224646799147E-16,1.219283680787E-48)); +#162099 = ADVANCED_FACE('',(#162100),#162111,.F.); +#162100 = FACE_BOUND('',#162101,.F.); +#162101 = EDGE_LOOP('',(#162102,#162108,#162109,#162110)); +#162102 = ORIENTED_EDGE('',*,*,#162103,.T.); +#162103 = EDGE_CURVE('',#161385,#162080,#162104,.T.); +#162104 = LINE('',#162105,#162106); +#162105 = CARTESIAN_POINT('',(0.8,-2.05,1.1)); +#162106 = VECTOR('',#162107,1.); +#162107 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162108 = ORIENTED_EDGE('',*,*,#162087,.T.); +#162109 = ORIENTED_EDGE('',*,*,#161005,.F.); +#162110 = ORIENTED_EDGE('',*,*,#161384,.F.); +#162111 = PLANE('',#162112); +#162112 = AXIS2_PLACEMENT_3D('',#162113,#162114,#162115); +#162113 = CARTESIAN_POINT('',(0.8,-2.05,1.1)); +#162114 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162115 = DIRECTION('',(-1.359631073446E-32,-1.110223024625E-16,-1.)); +#162116 = ADVANCED_FACE('',(#162117),#162128,.T.); +#162117 = FACE_BOUND('',#162118,.T.); +#162118 = EDGE_LOOP('',(#162119,#162120,#162121,#162122)); +#162119 = ORIENTED_EDGE('',*,*,#161087,.T.); +#162120 = ORIENTED_EDGE('',*,*,#161881,.T.); +#162121 = ORIENTED_EDGE('',*,*,#161168,.T.); +#162122 = ORIENTED_EDGE('',*,*,#162123,.F.); +#162123 = EDGE_CURVE('',#161079,#161160,#162124,.T.); +#162124 = LINE('',#162125,#162126); +#162125 = CARTESIAN_POINT('',(3.95,-4.65,3.3)); +#162126 = VECTOR('',#162127,1.); +#162127 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162128 = PLANE('',#162129); +#162129 = AXIS2_PLACEMENT_3D('',#162130,#162131,#162132); +#162130 = CARTESIAN_POINT('',(3.95,-6.25,3.3)); +#162131 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162132 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#162133 = ADVANCED_FACE('',(#162134),#162140,.F.); +#162134 = FACE_BOUND('',#162135,.F.); +#162135 = EDGE_LOOP('',(#162136,#162137,#162138,#162139)); +#162136 = ORIENTED_EDGE('',*,*,#161102,.T.); +#162137 = ORIENTED_EDGE('',*,*,#161159,.T.); +#162138 = ORIENTED_EDGE('',*,*,#162123,.F.); +#162139 = ORIENTED_EDGE('',*,*,#161078,.F.); +#162140 = CYLINDRICAL_SURFACE('',#162141,0.4); +#162141 = AXIS2_PLACEMENT_3D('',#162142,#162143,#162144); +#162142 = CARTESIAN_POINT('',(3.95,-4.65,2.9)); +#162143 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162144 = DIRECTION('',(1.359631073446E-32,1.110223024625E-16,1.)); +#162145 = ADVANCED_FACE('',(#162146),#162157,.F.); +#162146 = FACE_BOUND('',#162147,.F.); +#162147 = EDGE_LOOP('',(#162148,#162149,#162150,#162156)); +#162148 = ORIENTED_EDGE('',*,*,#161952,.T.); +#162149 = ORIENTED_EDGE('',*,*,#161135,.T.); +#162150 = ORIENTED_EDGE('',*,*,#162151,.F.); +#162151 = EDGE_CURVE('',#161231,#161136,#162152,.T.); +#162152 = LINE('',#162153,#162154); +#162153 = CARTESIAN_POINT('',(-0.95,1.35,3.2)); +#162154 = VECTOR('',#162155,1.); +#162155 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162156 = ORIENTED_EDGE('',*,*,#161230,.F.); +#162157 = PLANE('',#162158); +#162158 = AXIS2_PLACEMENT_3D('',#162159,#162160,#162161); +#162159 = CARTESIAN_POINT('',(-0.95,-0.25,4.1)); +#162160 = DIRECTION('',(-6.003968578616E-17,-0.490261239633, + -0.871575537124)); +#162161 = DIRECTION('',(1.067372191754E-16,0.871575537124, + -0.490261239633)); +#162162 = ADVANCED_FACE('',(#162163),#162169,.F.); +#162163 = FACE_BOUND('',#162164,.F.); +#162164 = EDGE_LOOP('',(#162165,#162166,#162167,#162168)); +#162165 = ORIENTED_EDGE('',*,*,#162151,.T.); +#162166 = ORIENTED_EDGE('',*,*,#161143,.T.); +#162167 = ORIENTED_EDGE('',*,*,#161198,.F.); +#162168 = ORIENTED_EDGE('',*,*,#161238,.F.); +#162169 = PLANE('',#162170); +#162170 = AXIS2_PLACEMENT_3D('',#162171,#162172,#162173); +#162171 = CARTESIAN_POINT('',(-0.95,1.35,3.2)); +#162172 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162173 = DIRECTION('',(-0.,0.,-1.)); +#162174 = ADVANCED_FACE('',(#162175),#162193,.F.); +#162175 = FACE_BOUND('',#162176,.F.); +#162176 = EDGE_LOOP('',(#162177,#162178,#162184,#162185,#162191,#162192) + ); +#162177 = ORIENTED_EDGE('',*,*,#161943,.F.); +#162178 = ORIENTED_EDGE('',*,*,#162179,.F.); +#162179 = EDGE_CURVE('',#161781,#161944,#162180,.T.); +#162180 = LINE('',#162181,#162182); +#162181 = CARTESIAN_POINT('',(-1.4,-4.45,4.8)); +#162182 = VECTOR('',#162183,1.); +#162183 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#162184 = ORIENTED_EDGE('',*,*,#161788,.F.); +#162185 = ORIENTED_EDGE('',*,*,#162186,.T.); +#162186 = EDGE_CURVE('',#161789,#161867,#162187,.T.); +#162187 = LINE('',#162188,#162189); +#162188 = CARTESIAN_POINT('',(-0.95,-4.45,4.8)); +#162189 = VECTOR('',#162190,1.); +#162190 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162191 = ORIENTED_EDGE('',*,*,#161874,.T.); +#162192 = ORIENTED_EDGE('',*,*,#161184,.F.); +#162193 = PLANE('',#162194); +#162194 = AXIS2_PLACEMENT_3D('',#162195,#162196,#162197); +#162195 = CARTESIAN_POINT('',(3.95,-0.25,4.8)); +#162196 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162197 = DIRECTION('',(-1.,1.224646799147E-16,6.927121900793E-45)); +#162198 = ADVANCED_FACE('',(#162199),#162211,.T.); +#162199 = FACE_BOUND('',#162200,.T.); +#162200 = EDGE_LOOP('',(#162201,#162202,#162203,#162204,#162210)); +#162201 = ORIENTED_EDGE('',*,*,#162179,.F.); +#162202 = ORIENTED_EDGE('',*,*,#161780,.T.); +#162203 = ORIENTED_EDGE('',*,*,#161313,.T.); +#162204 = ORIENTED_EDGE('',*,*,#162205,.T.); +#162205 = EDGE_CURVE('',#161314,#161969,#162206,.T.); +#162206 = LINE('',#162207,#162208); +#162207 = CARTESIAN_POINT('',(-1.4,-4.45,4.2)); +#162208 = VECTOR('',#162209,1.); +#162209 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#162210 = ORIENTED_EDGE('',*,*,#161976,.F.); +#162211 = PLANE('',#162212); +#162212 = AXIS2_PLACEMENT_3D('',#162213,#162214,#162215); +#162213 = CARTESIAN_POINT('',(-1.4,-4.45,4.8)); +#162214 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162215 = DIRECTION('',(1.224646799147E-16,1.,-1.110223024625E-16)); +#162216 = ADVANCED_FACE('',(#162217),#162223,.F.); +#162217 = FACE_BOUND('',#162218,.F.); +#162218 = EDGE_LOOP('',(#162219,#162220,#162221,#162222)); +#162219 = ORIENTED_EDGE('',*,*,#162064,.T.); +#162220 = ORIENTED_EDGE('',*,*,#162079,.T.); +#162221 = ORIENTED_EDGE('',*,*,#162103,.F.); +#162222 = ORIENTED_EDGE('',*,*,#161392,.F.); +#162223 = PLANE('',#162224); +#162224 = AXIS2_PLACEMENT_3D('',#162225,#162226,#162227); +#162225 = CARTESIAN_POINT('',(1.2,-2.05,1.1)); +#162226 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162227 = DIRECTION('',(-1.,1.224646799147E-16,6.927121900793E-45)); +#162228 = ADVANCED_FACE('',(#162229),#162237,.F.); +#162229 = FACE_BOUND('',#162230,.F.); +#162230 = EDGE_LOOP('',(#162231,#162232,#162233,#162234,#162235,#162236) + ); +#162231 = ORIENTED_EDGE('',*,*,#161375,.T.); +#162232 = ORIENTED_EDGE('',*,*,#162205,.T.); +#162233 = ORIENTED_EDGE('',*,*,#161968,.T.); +#162234 = ORIENTED_EDGE('',*,*,#161991,.F.); +#162235 = ORIENTED_EDGE('',*,*,#161724,.T.); +#162236 = ORIENTED_EDGE('',*,*,#161756,.T.); +#162237 = PLANE('',#162238); +#162238 = AXIS2_PLACEMENT_3D('',#162239,#162240,#162241); +#162239 = CARTESIAN_POINT('',(-0.9,-2.35,4.2)); +#162240 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162241 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162242 = ADVANCED_FACE('',(#162243),#162268,.F.); +#162243 = FACE_BOUND('',#162244,.F.); +#162244 = EDGE_LOOP('',(#162245,#162255,#162261,#162262)); +#162245 = ORIENTED_EDGE('',*,*,#162246,.T.); +#162246 = EDGE_CURVE('',#162247,#162249,#162251,.T.); +#162247 = VERTEX_POINT('',#162248); +#162248 = CARTESIAN_POINT('',(0.25,-5.55,2.85)); +#162249 = VERTEX_POINT('',#162250); +#162250 = CARTESIAN_POINT('',(0.25,-5.55,3.35)); +#162251 = LINE('',#162252,#162253); +#162252 = CARTESIAN_POINT('',(0.25,-5.55,2.85)); +#162253 = VECTOR('',#162254,1.); +#162254 = DIRECTION('',(0.,0.,1.)); +#162255 = ORIENTED_EDGE('',*,*,#162256,.T.); +#162256 = EDGE_CURVE('',#162249,#161410,#162257,.T.); +#162257 = LINE('',#162258,#162259); +#162258 = CARTESIAN_POINT('',(0.25,-5.75,3.35)); +#162259 = VECTOR('',#162260,1.); +#162260 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162261 = ORIENTED_EDGE('',*,*,#161409,.T.); +#162262 = ORIENTED_EDGE('',*,*,#162263,.T.); +#162263 = EDGE_CURVE('',#161412,#162247,#162264,.T.); +#162264 = LINE('',#162265,#162266); +#162265 = CARTESIAN_POINT('',(0.25,-0.25,2.85)); +#162266 = VECTOR('',#162267,1.); +#162267 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162268 = PLANE('',#162269); +#162269 = AXIS2_PLACEMENT_3D('',#162270,#162271,#162272); +#162270 = CARTESIAN_POINT('',(0.25,-1.421959173294,1.302213422577)); +#162271 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162272 = DIRECTION('',(0.,0.,1.)); +#162273 = ADVANCED_FACE('',(#162274),#162292,.F.); +#162274 = FACE_BOUND('',#162275,.F.); +#162275 = EDGE_LOOP('',(#162276,#162277,#162285,#162291)); +#162276 = ORIENTED_EDGE('',*,*,#162256,.F.); +#162277 = ORIENTED_EDGE('',*,*,#162278,.T.); +#162278 = EDGE_CURVE('',#162249,#162279,#162281,.T.); +#162279 = VERTEX_POINT('',#162280); +#162280 = CARTESIAN_POINT('',(-0.25,-5.55,3.35)); +#162281 = LINE('',#162282,#162283); +#162282 = CARTESIAN_POINT('',(0.25,-5.55,3.35)); +#162283 = VECTOR('',#162284,1.); +#162284 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162285 = ORIENTED_EDGE('',*,*,#162286,.T.); +#162286 = EDGE_CURVE('',#162279,#161428,#162287,.T.); +#162287 = LINE('',#162288,#162289); +#162288 = CARTESIAN_POINT('',(-0.25,-5.75,3.35)); +#162289 = VECTOR('',#162290,1.); +#162290 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162291 = ORIENTED_EDGE('',*,*,#161435,.T.); +#162292 = PLANE('',#162293); +#162293 = AXIS2_PLACEMENT_3D('',#162294,#162295,#162296); +#162294 = CARTESIAN_POINT('',(0.25,-5.75,3.35)); +#162295 = DIRECTION('',(-0.,0.,-1.)); +#162296 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162297 = ADVANCED_FACE('',(#162298),#162316,.T.); +#162298 = FACE_BOUND('',#162299,.T.); +#162299 = EDGE_LOOP('',(#162300,#162308,#162309,#162310)); +#162300 = ORIENTED_EDGE('',*,*,#162301,.T.); +#162301 = EDGE_CURVE('',#162302,#162279,#162304,.T.); +#162302 = VERTEX_POINT('',#162303); +#162303 = CARTESIAN_POINT('',(-0.25,-5.55,2.85)); +#162304 = LINE('',#162305,#162306); +#162305 = CARTESIAN_POINT('',(-0.25,-5.55,2.85)); +#162306 = VECTOR('',#162307,1.); +#162307 = DIRECTION('',(0.,0.,1.)); +#162308 = ORIENTED_EDGE('',*,*,#162286,.T.); +#162309 = ORIENTED_EDGE('',*,*,#161427,.T.); +#162310 = ORIENTED_EDGE('',*,*,#162311,.T.); +#162311 = EDGE_CURVE('',#161420,#162302,#162312,.T.); +#162312 = LINE('',#162313,#162314); +#162313 = CARTESIAN_POINT('',(-0.25,-0.25,2.85)); +#162314 = VECTOR('',#162315,1.); +#162315 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162316 = PLANE('',#162317); +#162317 = AXIS2_PLACEMENT_3D('',#162318,#162319,#162320); +#162318 = CARTESIAN_POINT('',(-0.25,-1.421959173294,1.302213422577)); +#162319 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162320 = DIRECTION('',(0.,0.,1.)); +#162321 = ADVANCED_FACE('',(#162322),#162333,.F.); +#162322 = FACE_BOUND('',#162323,.F.); +#162323 = EDGE_LOOP('',(#162324,#162325,#162326,#162327)); +#162324 = ORIENTED_EDGE('',*,*,#162263,.F.); +#162325 = ORIENTED_EDGE('',*,*,#161419,.T.); +#162326 = ORIENTED_EDGE('',*,*,#162311,.T.); +#162327 = ORIENTED_EDGE('',*,*,#162328,.F.); +#162328 = EDGE_CURVE('',#162247,#162302,#162329,.T.); +#162329 = LINE('',#162330,#162331); +#162330 = CARTESIAN_POINT('',(0.25,-5.55,2.85)); +#162331 = VECTOR('',#162332,1.); +#162332 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162333 = PLANE('',#162334); +#162334 = AXIS2_PLACEMENT_3D('',#162335,#162336,#162337); +#162335 = CARTESIAN_POINT('',(0.25,-0.25,2.85)); +#162336 = DIRECTION('',(0.,0.,1.)); +#162337 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162338 = ADVANCED_FACE('',(#162339),#162364,.F.); +#162339 = FACE_BOUND('',#162340,.F.); +#162340 = EDGE_LOOP('',(#162341,#162351,#162357,#162358)); +#162341 = ORIENTED_EDGE('',*,*,#162342,.T.); +#162342 = EDGE_CURVE('',#162343,#162345,#162347,.T.); +#162343 = VERTEX_POINT('',#162344); +#162344 = CARTESIAN_POINT('',(2.25,-5.55,2.85)); +#162345 = VERTEX_POINT('',#162346); +#162346 = CARTESIAN_POINT('',(2.25,-5.55,3.35)); +#162347 = LINE('',#162348,#162349); +#162348 = CARTESIAN_POINT('',(2.25,-5.55,2.85)); +#162349 = VECTOR('',#162350,1.); +#162350 = DIRECTION('',(0.,0.,1.)); +#162351 = ORIENTED_EDGE('',*,*,#162352,.T.); +#162352 = EDGE_CURVE('',#162345,#161444,#162353,.T.); +#162353 = LINE('',#162354,#162355); +#162354 = CARTESIAN_POINT('',(2.25,-5.75,3.35)); +#162355 = VECTOR('',#162356,1.); +#162356 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162357 = ORIENTED_EDGE('',*,*,#161443,.T.); +#162358 = ORIENTED_EDGE('',*,*,#162359,.T.); +#162359 = EDGE_CURVE('',#161446,#162343,#162360,.T.); +#162360 = LINE('',#162361,#162362); +#162361 = CARTESIAN_POINT('',(2.25,-0.25,2.85)); +#162362 = VECTOR('',#162363,1.); +#162363 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162364 = PLANE('',#162365); +#162365 = AXIS2_PLACEMENT_3D('',#162366,#162367,#162368); +#162366 = CARTESIAN_POINT('',(2.25,-1.421959173294,1.302213422577)); +#162367 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162368 = DIRECTION('',(0.,0.,1.)); +#162369 = ADVANCED_FACE('',(#162370),#162388,.F.); +#162370 = FACE_BOUND('',#162371,.F.); +#162371 = EDGE_LOOP('',(#162372,#162373,#162381,#162387)); +#162372 = ORIENTED_EDGE('',*,*,#162352,.F.); +#162373 = ORIENTED_EDGE('',*,*,#162374,.T.); +#162374 = EDGE_CURVE('',#162345,#162375,#162377,.T.); +#162375 = VERTEX_POINT('',#162376); +#162376 = CARTESIAN_POINT('',(1.75,-5.55,3.35)); +#162377 = LINE('',#162378,#162379); +#162378 = CARTESIAN_POINT('',(2.25,-5.55,3.35)); +#162379 = VECTOR('',#162380,1.); +#162380 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162381 = ORIENTED_EDGE('',*,*,#162382,.T.); +#162382 = EDGE_CURVE('',#162375,#161462,#162383,.T.); +#162383 = LINE('',#162384,#162385); +#162384 = CARTESIAN_POINT('',(1.75,-5.75,3.35)); +#162385 = VECTOR('',#162386,1.); +#162386 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162387 = ORIENTED_EDGE('',*,*,#161469,.T.); +#162388 = PLANE('',#162389); +#162389 = AXIS2_PLACEMENT_3D('',#162390,#162391,#162392); +#162390 = CARTESIAN_POINT('',(2.25,-5.75,3.35)); +#162391 = DIRECTION('',(-0.,0.,-1.)); +#162392 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162393 = ADVANCED_FACE('',(#162394),#162412,.T.); +#162394 = FACE_BOUND('',#162395,.T.); +#162395 = EDGE_LOOP('',(#162396,#162404,#162405,#162406)); +#162396 = ORIENTED_EDGE('',*,*,#162397,.T.); +#162397 = EDGE_CURVE('',#162398,#162375,#162400,.T.); +#162398 = VERTEX_POINT('',#162399); +#162399 = CARTESIAN_POINT('',(1.75,-5.55,2.85)); +#162400 = LINE('',#162401,#162402); +#162401 = CARTESIAN_POINT('',(1.75,-5.55,2.85)); +#162402 = VECTOR('',#162403,1.); +#162403 = DIRECTION('',(0.,0.,1.)); +#162404 = ORIENTED_EDGE('',*,*,#162382,.T.); +#162405 = ORIENTED_EDGE('',*,*,#161461,.T.); +#162406 = ORIENTED_EDGE('',*,*,#162407,.T.); +#162407 = EDGE_CURVE('',#161454,#162398,#162408,.T.); +#162408 = LINE('',#162409,#162410); +#162409 = CARTESIAN_POINT('',(1.75,-0.25,2.85)); +#162410 = VECTOR('',#162411,1.); +#162411 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162412 = PLANE('',#162413); +#162413 = AXIS2_PLACEMENT_3D('',#162414,#162415,#162416); +#162414 = CARTESIAN_POINT('',(1.75,-1.421959173294,1.302213422577)); +#162415 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162416 = DIRECTION('',(0.,0.,1.)); +#162417 = ADVANCED_FACE('',(#162418),#162429,.F.); +#162418 = FACE_BOUND('',#162419,.F.); +#162419 = EDGE_LOOP('',(#162420,#162421,#162422,#162423)); +#162420 = ORIENTED_EDGE('',*,*,#162359,.F.); +#162421 = ORIENTED_EDGE('',*,*,#161453,.T.); +#162422 = ORIENTED_EDGE('',*,*,#162407,.T.); +#162423 = ORIENTED_EDGE('',*,*,#162424,.F.); +#162424 = EDGE_CURVE('',#162343,#162398,#162425,.T.); +#162425 = LINE('',#162426,#162427); +#162426 = CARTESIAN_POINT('',(2.25,-5.55,2.85)); +#162427 = VECTOR('',#162428,1.); +#162428 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162429 = PLANE('',#162430); +#162430 = AXIS2_PLACEMENT_3D('',#162431,#162432,#162433); +#162431 = CARTESIAN_POINT('',(2.25,-0.25,2.85)); +#162432 = DIRECTION('',(0.,0.,1.)); +#162433 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162434 = ADVANCED_FACE('',(#162435,#162441),#162475,.F.); +#162435 = FACE_BOUND('',#162436,.F.); +#162436 = EDGE_LOOP('',(#162437,#162438,#162439,#162440)); +#162437 = ORIENTED_EDGE('',*,*,#161617,.T.); +#162438 = ORIENTED_EDGE('',*,*,#161635,.T.); +#162439 = ORIENTED_EDGE('',*,*,#162038,.F.); +#162440 = ORIENTED_EDGE('',*,*,#161500,.F.); +#162441 = FACE_BOUND('',#162442,.F.); +#162442 = EDGE_LOOP('',(#162443,#162453,#162461,#162469)); +#162443 = ORIENTED_EDGE('',*,*,#162444,.T.); +#162444 = EDGE_CURVE('',#162445,#162447,#162449,.T.); +#162445 = VERTEX_POINT('',#162446); +#162446 = CARTESIAN_POINT('',(2.25,-0.35,3.35)); +#162447 = VERTEX_POINT('',#162448); +#162448 = CARTESIAN_POINT('',(2.25,-0.35,2.85)); +#162449 = LINE('',#162450,#162451); +#162450 = CARTESIAN_POINT('',(2.25,-0.35,2.451106711288)); +#162451 = VECTOR('',#162452,1.); +#162452 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162453 = ORIENTED_EDGE('',*,*,#162454,.T.); +#162454 = EDGE_CURVE('',#162447,#162455,#162457,.T.); +#162455 = VERTEX_POINT('',#162456); +#162456 = CARTESIAN_POINT('',(1.75,-0.35,2.85)); +#162457 = LINE('',#162458,#162459); +#162458 = CARTESIAN_POINT('',(2.5,-0.35,2.85)); +#162459 = VECTOR('',#162460,1.); +#162460 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162461 = ORIENTED_EDGE('',*,*,#162462,.F.); +#162462 = EDGE_CURVE('',#162463,#162455,#162465,.T.); +#162463 = VERTEX_POINT('',#162464); +#162464 = CARTESIAN_POINT('',(1.75,-0.35,3.35)); +#162465 = LINE('',#162466,#162467); +#162466 = CARTESIAN_POINT('',(1.75,-0.35,2.451106711288)); +#162467 = VECTOR('',#162468,1.); +#162468 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162469 = ORIENTED_EDGE('',*,*,#162470,.T.); +#162470 = EDGE_CURVE('',#162463,#162445,#162471,.T.); +#162471 = LINE('',#162472,#162473); +#162472 = CARTESIAN_POINT('',(2.5,-0.35,3.35)); +#162473 = VECTOR('',#162474,1.); +#162474 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162475 = PLANE('',#162476); +#162476 = AXIS2_PLACEMENT_3D('',#162477,#162478,#162479); +#162477 = CARTESIAN_POINT('',(2.75,-0.35,3.6)); +#162478 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162479 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162480 = ADVANCED_FACE('',(#162481,#162487),#162521,.F.); +#162481 = FACE_BOUND('',#162482,.F.); +#162482 = EDGE_LOOP('',(#162483,#162484,#162485,#162486)); +#162483 = ORIENTED_EDGE('',*,*,#161740,.T.); +#162484 = ORIENTED_EDGE('',*,*,#161998,.T.); +#162485 = ORIENTED_EDGE('',*,*,#162021,.F.); +#162486 = ORIENTED_EDGE('',*,*,#161690,.F.); +#162487 = FACE_BOUND('',#162488,.F.); +#162488 = EDGE_LOOP('',(#162489,#162499,#162507,#162515)); +#162489 = ORIENTED_EDGE('',*,*,#162490,.T.); +#162490 = EDGE_CURVE('',#162491,#162493,#162495,.T.); +#162491 = VERTEX_POINT('',#162492); +#162492 = CARTESIAN_POINT('',(0.25,-0.35,3.35)); +#162493 = VERTEX_POINT('',#162494); +#162494 = CARTESIAN_POINT('',(0.25,-0.35,2.85)); +#162495 = LINE('',#162496,#162497); +#162496 = CARTESIAN_POINT('',(0.25,-0.35,2.451106711288)); +#162497 = VECTOR('',#162498,1.); +#162498 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162499 = ORIENTED_EDGE('',*,*,#162500,.T.); +#162500 = EDGE_CURVE('',#162493,#162501,#162503,.T.); +#162501 = VERTEX_POINT('',#162502); +#162502 = CARTESIAN_POINT('',(-0.25,-0.35,2.85)); +#162503 = LINE('',#162504,#162505); +#162504 = CARTESIAN_POINT('',(0.5,-0.35,2.85)); +#162505 = VECTOR('',#162506,1.); +#162506 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162507 = ORIENTED_EDGE('',*,*,#162508,.F.); +#162508 = EDGE_CURVE('',#162509,#162501,#162511,.T.); +#162509 = VERTEX_POINT('',#162510); +#162510 = CARTESIAN_POINT('',(-0.25,-0.35,3.35)); +#162511 = LINE('',#162512,#162513); +#162512 = CARTESIAN_POINT('',(-0.25,-0.35,2.451106711288)); +#162513 = VECTOR('',#162514,1.); +#162514 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162515 = ORIENTED_EDGE('',*,*,#162516,.T.); +#162516 = EDGE_CURVE('',#162509,#162491,#162517,.T.); +#162517 = LINE('',#162518,#162519); +#162518 = CARTESIAN_POINT('',(0.5,-0.35,3.35)); +#162519 = VECTOR('',#162520,1.); +#162520 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162521 = PLANE('',#162522); +#162522 = AXIS2_PLACEMENT_3D('',#162523,#162524,#162525); +#162523 = CARTESIAN_POINT('',(0.75,-0.35,3.6)); +#162524 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162525 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162526 = ADVANCED_FACE('',(#162527),#162538,.F.); +#162527 = FACE_BOUND('',#162528,.F.); +#162528 = EDGE_LOOP('',(#162529,#162535,#162536,#162537)); +#162529 = ORIENTED_EDGE('',*,*,#162530,.T.); +#162530 = EDGE_CURVE('',#161797,#161859,#162531,.T.); +#162531 = LINE('',#162532,#162533); +#162532 = CARTESIAN_POINT('',(-0.95,-4.45,4.85)); +#162533 = VECTOR('',#162534,1.); +#162534 = DIRECTION('',(-1.224646799147E-16,-1.,1.110223024625E-16)); +#162535 = ORIENTED_EDGE('',*,*,#161866,.T.); +#162536 = ORIENTED_EDGE('',*,*,#162186,.F.); +#162537 = ORIENTED_EDGE('',*,*,#161796,.F.); +#162538 = PLANE('',#162539); +#162539 = AXIS2_PLACEMENT_3D('',#162540,#162541,#162542); +#162540 = CARTESIAN_POINT('',(-0.95,-4.45,4.85)); +#162541 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#162542 = DIRECTION('',(-1.359631073446E-32,-1.110223024625E-16,-1.)); +#162543 = ADVANCED_FACE('',(#162544),#162550,.F.); +#162544 = FACE_BOUND('',#162545,.F.); +#162545 = EDGE_LOOP('',(#162546,#162547,#162548,#162549)); +#162546 = ORIENTED_EDGE('',*,*,#161835,.T.); +#162547 = ORIENTED_EDGE('',*,*,#161858,.T.); +#162548 = ORIENTED_EDGE('',*,*,#162530,.F.); +#162549 = ORIENTED_EDGE('',*,*,#161804,.F.); +#162550 = PLANE('',#162551); +#162551 = AXIS2_PLACEMENT_3D('',#162552,#162553,#162554); +#162552 = CARTESIAN_POINT('',(-0.45,-4.45,4.85)); +#162553 = DIRECTION('',(-1.359631073447E-32,-1.110223024625E-16,-1.)); +#162554 = DIRECTION('',(-1.,1.224646799147E-16,6.927121900793E-45)); +#162555 = ADVANCED_FACE('',(#162556),#162581,.T.); +#162556 = FACE_BOUND('',#162557,.T.); +#162557 = EDGE_LOOP('',(#162558,#162566,#162567,#162575)); +#162558 = ORIENTED_EDGE('',*,*,#162559,.F.); +#162559 = EDGE_CURVE('',#162247,#162560,#162562,.T.); +#162560 = VERTEX_POINT('',#162561); +#162561 = CARTESIAN_POINT('',(5.E-02,-5.75,3.05)); +#162562 = LINE('',#162563,#162564); +#162563 = CARTESIAN_POINT('',(0.183333333333,-5.616666666667, + 2.916666666667)); +#162564 = VECTOR('',#162565,1.); +#162565 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#162566 = ORIENTED_EDGE('',*,*,#162246,.T.); +#162567 = ORIENTED_EDGE('',*,*,#162568,.F.); +#162568 = EDGE_CURVE('',#162569,#162249,#162571,.T.); +#162569 = VERTEX_POINT('',#162570); +#162570 = CARTESIAN_POINT('',(5.E-02,-5.75,3.15)); +#162571 = LINE('',#162572,#162573); +#162572 = CARTESIAN_POINT('',(0.1,-5.7,3.2)); +#162573 = VECTOR('',#162574,1.); +#162574 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#162575 = ORIENTED_EDGE('',*,*,#162576,.F.); +#162576 = EDGE_CURVE('',#162560,#162569,#162577,.T.); +#162577 = LINE('',#162578,#162579); +#162578 = CARTESIAN_POINT('',(5.E-02,-5.75,2.85)); +#162579 = VECTOR('',#162580,1.); +#162580 = DIRECTION('',(0.,0.,1.)); +#162581 = PLANE('',#162582); +#162582 = AXIS2_PLACEMENT_3D('',#162583,#162584,#162585); +#162583 = CARTESIAN_POINT('',(0.15,-5.65,2.85)); +#162584 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.735417226644E-18)); +#162585 = DIRECTION('',(1.227125289148E-18,-1.227125289148E-18,1.)); +#162586 = ADVANCED_FACE('',(#162587),#162605,.T.); +#162587 = FACE_BOUND('',#162588,.F.); +#162588 = EDGE_LOOP('',(#162589,#162590,#162598,#162604)); +#162589 = ORIENTED_EDGE('',*,*,#162568,.F.); +#162590 = ORIENTED_EDGE('',*,*,#162591,.T.); +#162591 = EDGE_CURVE('',#162569,#162592,#162594,.T.); +#162592 = VERTEX_POINT('',#162593); +#162593 = CARTESIAN_POINT('',(-5.E-02,-5.75,3.15)); +#162594 = LINE('',#162595,#162596); +#162595 = CARTESIAN_POINT('',(0.25,-5.75,3.15)); +#162596 = VECTOR('',#162597,1.); +#162597 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162598 = ORIENTED_EDGE('',*,*,#162599,.F.); +#162599 = EDGE_CURVE('',#162279,#162592,#162600,.T.); +#162600 = LINE('',#162601,#162602); +#162601 = CARTESIAN_POINT('',(-1.666666666667E-02,-5.783333333333, + 3.116666666667)); +#162602 = VECTOR('',#162603,1.); +#162603 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#162604 = ORIENTED_EDGE('',*,*,#162278,.F.); +#162605 = PLANE('',#162606); +#162606 = AXIS2_PLACEMENT_3D('',#162607,#162608,#162609); +#162607 = CARTESIAN_POINT('',(0.25,-5.65,3.25)); +#162608 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + 0.707106781187)); +#162609 = DIRECTION('',(1.,-1.224646799147E-16,-2.105273685727E-29)); +#162610 = ADVANCED_FACE('',(#162611),#162629,.F.); +#162611 = FACE_BOUND('',#162612,.F.); +#162612 = EDGE_LOOP('',(#162613,#162621,#162622,#162623)); +#162613 = ORIENTED_EDGE('',*,*,#162614,.F.); +#162614 = EDGE_CURVE('',#162302,#162615,#162617,.T.); +#162615 = VERTEX_POINT('',#162616); +#162616 = CARTESIAN_POINT('',(-5.E-02,-5.75,3.05)); +#162617 = LINE('',#162618,#162619); +#162618 = CARTESIAN_POINT('',(-0.1,-5.7,3.)); +#162619 = VECTOR('',#162620,1.); +#162620 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#162621 = ORIENTED_EDGE('',*,*,#162301,.T.); +#162622 = ORIENTED_EDGE('',*,*,#162599,.T.); +#162623 = ORIENTED_EDGE('',*,*,#162624,.F.); +#162624 = EDGE_CURVE('',#162615,#162592,#162625,.T.); +#162625 = LINE('',#162626,#162627); +#162626 = CARTESIAN_POINT('',(-5.E-02,-5.75,2.85)); +#162627 = VECTOR('',#162628,1.); +#162628 = DIRECTION('',(0.,0.,1.)); +#162629 = PLANE('',#162630); +#162630 = AXIS2_PLACEMENT_3D('',#162631,#162632,#162633); +#162631 = CARTESIAN_POINT('',(-0.15,-5.65,2.85)); +#162632 = DIRECTION('',(0.707106781187,0.707106781187,1.735417226644E-18 + )); +#162633 = DIRECTION('',(-1.227125289148E-18,-1.227125289148E-18,1.)); +#162634 = ADVANCED_FACE('',(#162635),#162646,.T.); +#162635 = FACE_BOUND('',#162636,.F.); +#162636 = EDGE_LOOP('',(#162637,#162638,#162639,#162640)); +#162637 = ORIENTED_EDGE('',*,*,#162559,.F.); +#162638 = ORIENTED_EDGE('',*,*,#162328,.T.); +#162639 = ORIENTED_EDGE('',*,*,#162614,.T.); +#162640 = ORIENTED_EDGE('',*,*,#162641,.F.); +#162641 = EDGE_CURVE('',#162560,#162615,#162642,.T.); +#162642 = LINE('',#162643,#162644); +#162643 = CARTESIAN_POINT('',(0.25,-5.75,3.05)); +#162644 = VECTOR('',#162645,1.); +#162645 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162646 = PLANE('',#162647); +#162647 = AXIS2_PLACEMENT_3D('',#162648,#162649,#162650); +#162648 = CARTESIAN_POINT('',(0.25,-5.65,2.95)); +#162649 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#162650 = DIRECTION('',(1.,-1.224646799147E-16,2.105273685727E-29)); +#162651 = ADVANCED_FACE('',(#162652),#162677,.T.); +#162652 = FACE_BOUND('',#162653,.T.); +#162653 = EDGE_LOOP('',(#162654,#162662,#162663,#162671)); +#162654 = ORIENTED_EDGE('',*,*,#162655,.F.); +#162655 = EDGE_CURVE('',#162343,#162656,#162658,.T.); +#162656 = VERTEX_POINT('',#162657); +#162657 = CARTESIAN_POINT('',(2.05,-5.75,3.05)); +#162658 = LINE('',#162659,#162660); +#162659 = CARTESIAN_POINT('',(2.183333333333,-5.616666666667, + 2.916666666667)); +#162660 = VECTOR('',#162661,1.); +#162661 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); +#162662 = ORIENTED_EDGE('',*,*,#162342,.T.); +#162663 = ORIENTED_EDGE('',*,*,#162664,.F.); +#162664 = EDGE_CURVE('',#162665,#162345,#162667,.T.); +#162665 = VERTEX_POINT('',#162666); +#162666 = CARTESIAN_POINT('',(2.05,-5.75,3.15)); +#162667 = LINE('',#162668,#162669); +#162668 = CARTESIAN_POINT('',(2.1,-5.7,3.2)); +#162669 = VECTOR('',#162670,1.); +#162670 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); +#162671 = ORIENTED_EDGE('',*,*,#162672,.F.); +#162672 = EDGE_CURVE('',#162656,#162665,#162673,.T.); +#162673 = LINE('',#162674,#162675); +#162674 = CARTESIAN_POINT('',(2.05,-5.75,2.85)); +#162675 = VECTOR('',#162676,1.); +#162676 = DIRECTION('',(0.,0.,1.)); +#162677 = PLANE('',#162678); +#162678 = AXIS2_PLACEMENT_3D('',#162679,#162680,#162681); +#162679 = CARTESIAN_POINT('',(2.15,-5.65,2.85)); +#162680 = DIRECTION('',(0.707106781187,-0.707106781187, + -1.735417226644E-18)); +#162681 = DIRECTION('',(1.227125289148E-18,-1.227125289148E-18,1.)); +#162682 = ADVANCED_FACE('',(#162683),#162701,.T.); +#162683 = FACE_BOUND('',#162684,.F.); +#162684 = EDGE_LOOP('',(#162685,#162686,#162694,#162700)); +#162685 = ORIENTED_EDGE('',*,*,#162664,.F.); +#162686 = ORIENTED_EDGE('',*,*,#162687,.T.); +#162687 = EDGE_CURVE('',#162665,#162688,#162690,.T.); +#162688 = VERTEX_POINT('',#162689); +#162689 = CARTESIAN_POINT('',(1.95,-5.75,3.15)); +#162690 = LINE('',#162691,#162692); +#162691 = CARTESIAN_POINT('',(2.25,-5.75,3.15)); +#162692 = VECTOR('',#162693,1.); +#162693 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162694 = ORIENTED_EDGE('',*,*,#162695,.F.); +#162695 = EDGE_CURVE('',#162375,#162688,#162696,.T.); +#162696 = LINE('',#162697,#162698); +#162697 = CARTESIAN_POINT('',(1.983333333333,-5.783333333333, + 3.116666666667)); +#162698 = VECTOR('',#162699,1.); +#162699 = DIRECTION('',(0.57735026919,-0.57735026919,-0.57735026919)); +#162700 = ORIENTED_EDGE('',*,*,#162374,.F.); +#162701 = PLANE('',#162702); +#162702 = AXIS2_PLACEMENT_3D('',#162703,#162704,#162705); +#162703 = CARTESIAN_POINT('',(2.25,-5.65,3.25)); +#162704 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + 0.707106781187)); +#162705 = DIRECTION('',(1.,-1.224646799147E-16,-2.105273685727E-29)); +#162706 = ADVANCED_FACE('',(#162707),#162725,.F.); +#162707 = FACE_BOUND('',#162708,.F.); +#162708 = EDGE_LOOP('',(#162709,#162717,#162718,#162719)); +#162709 = ORIENTED_EDGE('',*,*,#162710,.F.); +#162710 = EDGE_CURVE('',#162398,#162711,#162713,.T.); +#162711 = VERTEX_POINT('',#162712); +#162712 = CARTESIAN_POINT('',(1.95,-5.75,3.05)); +#162713 = LINE('',#162714,#162715); +#162714 = CARTESIAN_POINT('',(1.9,-5.7,3.)); +#162715 = VECTOR('',#162716,1.); +#162716 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); +#162717 = ORIENTED_EDGE('',*,*,#162397,.T.); +#162718 = ORIENTED_EDGE('',*,*,#162695,.T.); +#162719 = ORIENTED_EDGE('',*,*,#162720,.F.); +#162720 = EDGE_CURVE('',#162711,#162688,#162721,.T.); +#162721 = LINE('',#162722,#162723); +#162722 = CARTESIAN_POINT('',(1.95,-5.75,2.85)); +#162723 = VECTOR('',#162724,1.); +#162724 = DIRECTION('',(0.,0.,1.)); +#162725 = PLANE('',#162726); +#162726 = AXIS2_PLACEMENT_3D('',#162727,#162728,#162729); +#162727 = CARTESIAN_POINT('',(1.85,-5.65,2.85)); +#162728 = DIRECTION('',(0.707106781187,0.707106781187,1.735417226644E-18 + )); +#162729 = DIRECTION('',(-1.227125289148E-18,-1.227125289148E-18,1.)); +#162730 = ADVANCED_FACE('',(#162731),#162742,.T.); +#162731 = FACE_BOUND('',#162732,.F.); +#162732 = EDGE_LOOP('',(#162733,#162734,#162735,#162736)); +#162733 = ORIENTED_EDGE('',*,*,#162655,.F.); +#162734 = ORIENTED_EDGE('',*,*,#162424,.T.); +#162735 = ORIENTED_EDGE('',*,*,#162710,.T.); +#162736 = ORIENTED_EDGE('',*,*,#162737,.F.); +#162737 = EDGE_CURVE('',#162656,#162711,#162738,.T.); +#162738 = LINE('',#162739,#162740); +#162739 = CARTESIAN_POINT('',(2.25,-5.75,3.05)); +#162740 = VECTOR('',#162741,1.); +#162741 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162742 = PLANE('',#162743); +#162743 = AXIS2_PLACEMENT_3D('',#162744,#162745,#162746); +#162744 = CARTESIAN_POINT('',(2.25,-5.65,2.95)); +#162745 = DIRECTION('',(-8.659560562349E-17,-0.707106781187, + -0.707106781187)); +#162746 = DIRECTION('',(1.,-1.224646799147E-16,2.105273685727E-29)); +#162747 = ADVANCED_FACE('',(#162748),#162839,.F.); +#162748 = FACE_BOUND('',#162749,.F.); +#162749 = EDGE_LOOP('',(#162750,#162751,#162759,#162768,#162776,#162784, + #162792,#162800,#162808,#162816,#162824,#162833)); +#162750 = ORIENTED_EDGE('',*,*,#162444,.F.); +#162751 = ORIENTED_EDGE('',*,*,#162752,.T.); +#162752 = EDGE_CURVE('',#162445,#162753,#162755,.T.); +#162753 = VERTEX_POINT('',#162754); +#162754 = CARTESIAN_POINT('',(2.25,-0.3,3.35)); +#162755 = LINE('',#162756,#162757); +#162756 = CARTESIAN_POINT('',(2.25,-5.75,3.35)); +#162757 = VECTOR('',#162758,1.); +#162758 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162759 = ORIENTED_EDGE('',*,*,#162760,.T.); +#162760 = EDGE_CURVE('',#162753,#162761,#162763,.T.); +#162761 = VERTEX_POINT('',#162762); +#162762 = CARTESIAN_POINT('',(2.25,0.25,2.8)); +#162763 = CIRCLE('',#162764,0.55); +#162764 = AXIS2_PLACEMENT_3D('',#162765,#162766,#162767); +#162765 = CARTESIAN_POINT('',(2.25,-0.3,2.8)); +#162766 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162767 = DIRECTION('',(0.,0.,1.)); +#162768 = ORIENTED_EDGE('',*,*,#162769,.T.); +#162769 = EDGE_CURVE('',#162761,#162770,#162772,.T.); +#162770 = VERTEX_POINT('',#162771); +#162771 = CARTESIAN_POINT('',(2.25,0.25,-0.9)); +#162772 = LINE('',#162773,#162774); +#162773 = CARTESIAN_POINT('',(2.25,0.25,3.35)); +#162774 = VECTOR('',#162775,1.); +#162775 = DIRECTION('',(-0.,0.,-1.)); +#162776 = ORIENTED_EDGE('',*,*,#162777,.T.); +#162777 = EDGE_CURVE('',#162770,#162778,#162780,.T.); +#162778 = VERTEX_POINT('',#162779); +#162779 = CARTESIAN_POINT('',(2.25,-5.E-02,-1.5)); +#162780 = LINE('',#162781,#162782); +#162781 = CARTESIAN_POINT('',(2.25,0.25,-0.9)); +#162782 = VECTOR('',#162783,1.); +#162783 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#162784 = ORIENTED_EDGE('',*,*,#162785,.T.); +#162785 = EDGE_CURVE('',#162778,#162786,#162788,.T.); +#162786 = VERTEX_POINT('',#162787); +#162787 = CARTESIAN_POINT('',(2.25,0.218421052632,-3.2)); +#162788 = LINE('',#162789,#162790); +#162789 = CARTESIAN_POINT('',(2.25,-5.E-02,-1.5)); +#162790 = VECTOR('',#162791,1.); +#162791 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#162792 = ORIENTED_EDGE('',*,*,#162793,.T.); +#162793 = EDGE_CURVE('',#162786,#162794,#162796,.T.); +#162794 = VERTEX_POINT('',#162795); +#162795 = CARTESIAN_POINT('',(2.25,-0.281578947368,-3.2)); +#162796 = LINE('',#162797,#162798); +#162797 = CARTESIAN_POINT('',(2.25,0.25,-3.2)); +#162798 = VECTOR('',#162799,1.); +#162799 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162800 = ORIENTED_EDGE('',*,*,#162801,.T.); +#162801 = EDGE_CURVE('',#162794,#162802,#162804,.T.); +#162802 = VERTEX_POINT('',#162803); +#162803 = CARTESIAN_POINT('',(2.25,-0.55,-1.5)); +#162804 = LINE('',#162805,#162806); +#162805 = CARTESIAN_POINT('',(2.25,-0.25,-3.4)); +#162806 = VECTOR('',#162807,1.); +#162807 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#162808 = ORIENTED_EDGE('',*,*,#162809,.T.); +#162809 = EDGE_CURVE('',#162802,#162810,#162812,.T.); +#162810 = VERTEX_POINT('',#162811); +#162811 = CARTESIAN_POINT('',(2.25,-0.25,-0.9)); +#162812 = LINE('',#162813,#162814); +#162813 = CARTESIAN_POINT('',(2.25,-0.55,-1.5)); +#162814 = VECTOR('',#162815,1.); +#162815 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#162816 = ORIENTED_EDGE('',*,*,#162817,.T.); +#162817 = EDGE_CURVE('',#162810,#162818,#162820,.T.); +#162818 = VERTEX_POINT('',#162819); +#162819 = CARTESIAN_POINT('',(2.25,-0.25,2.8)); +#162820 = LINE('',#162821,#162822); +#162821 = CARTESIAN_POINT('',(2.25,-0.25,-0.9)); +#162822 = VECTOR('',#162823,1.); +#162823 = DIRECTION('',(0.,0.,1.)); +#162824 = ORIENTED_EDGE('',*,*,#162825,.F.); +#162825 = EDGE_CURVE('',#162826,#162818,#162828,.T.); +#162826 = VERTEX_POINT('',#162827); +#162827 = CARTESIAN_POINT('',(2.25,-0.3,2.85)); +#162828 = CIRCLE('',#162829,5.E-02); +#162829 = AXIS2_PLACEMENT_3D('',#162830,#162831,#162832); +#162830 = CARTESIAN_POINT('',(2.25,-0.3,2.8)); +#162831 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162832 = DIRECTION('',(0.,0.,1.)); +#162833 = ORIENTED_EDGE('',*,*,#162834,.T.); +#162834 = EDGE_CURVE('',#162826,#162447,#162835,.T.); +#162835 = LINE('',#162836,#162837); +#162836 = CARTESIAN_POINT('',(2.25,-0.25,2.85)); +#162837 = VECTOR('',#162838,1.); +#162838 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162839 = PLANE('',#162840); +#162840 = AXIS2_PLACEMENT_3D('',#162841,#162842,#162843); +#162841 = CARTESIAN_POINT('',(2.25,-1.421959173294,1.302213422577)); +#162842 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162843 = DIRECTION('',(0.,0.,1.)); +#162844 = ADVANCED_FACE('',(#162845),#162863,.F.); +#162845 = FACE_BOUND('',#162846,.F.); +#162846 = EDGE_LOOP('',(#162847,#162848,#162849,#162857)); +#162847 = ORIENTED_EDGE('',*,*,#162752,.F.); +#162848 = ORIENTED_EDGE('',*,*,#162470,.F.); +#162849 = ORIENTED_EDGE('',*,*,#162850,.T.); +#162850 = EDGE_CURVE('',#162463,#162851,#162853,.T.); +#162851 = VERTEX_POINT('',#162852); +#162852 = CARTESIAN_POINT('',(1.75,-0.3,3.35)); +#162853 = LINE('',#162854,#162855); +#162854 = CARTESIAN_POINT('',(1.75,-5.75,3.35)); +#162855 = VECTOR('',#162856,1.); +#162856 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162857 = ORIENTED_EDGE('',*,*,#162858,.F.); +#162858 = EDGE_CURVE('',#162753,#162851,#162859,.T.); +#162859 = LINE('',#162860,#162861); +#162860 = CARTESIAN_POINT('',(2.25,-0.3,3.35)); +#162861 = VECTOR('',#162862,1.); +#162862 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162863 = PLANE('',#162864); +#162864 = AXIS2_PLACEMENT_3D('',#162865,#162866,#162867); +#162865 = CARTESIAN_POINT('',(2.25,-5.75,3.35)); +#162866 = DIRECTION('',(-0.,0.,-1.)); +#162867 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162868 = ADVANCED_FACE('',(#162869),#162953,.T.); +#162869 = FACE_BOUND('',#162870,.T.); +#162870 = EDGE_LOOP('',(#162871,#162872,#162873,#162882,#162890,#162898, + #162906,#162914,#162922,#162930,#162938,#162947)); +#162871 = ORIENTED_EDGE('',*,*,#162462,.F.); +#162872 = ORIENTED_EDGE('',*,*,#162850,.T.); +#162873 = ORIENTED_EDGE('',*,*,#162874,.T.); +#162874 = EDGE_CURVE('',#162851,#162875,#162877,.T.); +#162875 = VERTEX_POINT('',#162876); +#162876 = CARTESIAN_POINT('',(1.75,0.25,2.8)); +#162877 = CIRCLE('',#162878,0.55); +#162878 = AXIS2_PLACEMENT_3D('',#162879,#162880,#162881); +#162879 = CARTESIAN_POINT('',(1.75,-0.3,2.8)); +#162880 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162881 = DIRECTION('',(0.,0.,1.)); +#162882 = ORIENTED_EDGE('',*,*,#162883,.T.); +#162883 = EDGE_CURVE('',#162875,#162884,#162886,.T.); +#162884 = VERTEX_POINT('',#162885); +#162885 = CARTESIAN_POINT('',(1.75,0.25,-0.9)); +#162886 = LINE('',#162887,#162888); +#162887 = CARTESIAN_POINT('',(1.75,0.25,3.35)); +#162888 = VECTOR('',#162889,1.); +#162889 = DIRECTION('',(-0.,0.,-1.)); +#162890 = ORIENTED_EDGE('',*,*,#162891,.T.); +#162891 = EDGE_CURVE('',#162884,#162892,#162894,.T.); +#162892 = VERTEX_POINT('',#162893); +#162893 = CARTESIAN_POINT('',(1.75,-5.E-02,-1.5)); +#162894 = LINE('',#162895,#162896); +#162895 = CARTESIAN_POINT('',(1.75,0.25,-0.9)); +#162896 = VECTOR('',#162897,1.); +#162897 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#162898 = ORIENTED_EDGE('',*,*,#162899,.T.); +#162899 = EDGE_CURVE('',#162892,#162900,#162902,.T.); +#162900 = VERTEX_POINT('',#162901); +#162901 = CARTESIAN_POINT('',(1.75,0.218421052632,-3.2)); +#162902 = LINE('',#162903,#162904); +#162903 = CARTESIAN_POINT('',(1.75,-5.E-02,-1.5)); +#162904 = VECTOR('',#162905,1.); +#162905 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#162906 = ORIENTED_EDGE('',*,*,#162907,.T.); +#162907 = EDGE_CURVE('',#162900,#162908,#162910,.T.); +#162908 = VERTEX_POINT('',#162909); +#162909 = CARTESIAN_POINT('',(1.75,-0.281578947368,-3.2)); +#162910 = LINE('',#162911,#162912); +#162911 = CARTESIAN_POINT('',(1.75,0.25,-3.2)); +#162912 = VECTOR('',#162913,1.); +#162913 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162914 = ORIENTED_EDGE('',*,*,#162915,.T.); +#162915 = EDGE_CURVE('',#162908,#162916,#162918,.T.); +#162916 = VERTEX_POINT('',#162917); +#162917 = CARTESIAN_POINT('',(1.75,-0.55,-1.5)); +#162918 = LINE('',#162919,#162920); +#162919 = CARTESIAN_POINT('',(1.75,-0.25,-3.4)); +#162920 = VECTOR('',#162921,1.); +#162921 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#162922 = ORIENTED_EDGE('',*,*,#162923,.T.); +#162923 = EDGE_CURVE('',#162916,#162924,#162926,.T.); +#162924 = VERTEX_POINT('',#162925); +#162925 = CARTESIAN_POINT('',(1.75,-0.25,-0.9)); +#162926 = LINE('',#162927,#162928); +#162927 = CARTESIAN_POINT('',(1.75,-0.55,-1.5)); +#162928 = VECTOR('',#162929,1.); +#162929 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#162930 = ORIENTED_EDGE('',*,*,#162931,.T.); +#162931 = EDGE_CURVE('',#162924,#162932,#162934,.T.); +#162932 = VERTEX_POINT('',#162933); +#162933 = CARTESIAN_POINT('',(1.75,-0.25,2.8)); +#162934 = LINE('',#162935,#162936); +#162935 = CARTESIAN_POINT('',(1.75,-0.25,-0.9)); +#162936 = VECTOR('',#162937,1.); +#162937 = DIRECTION('',(0.,0.,1.)); +#162938 = ORIENTED_EDGE('',*,*,#162939,.F.); +#162939 = EDGE_CURVE('',#162940,#162932,#162942,.T.); +#162940 = VERTEX_POINT('',#162941); +#162941 = CARTESIAN_POINT('',(1.75,-0.3,2.85)); +#162942 = CIRCLE('',#162943,5.E-02); +#162943 = AXIS2_PLACEMENT_3D('',#162944,#162945,#162946); +#162944 = CARTESIAN_POINT('',(1.75,-0.3,2.8)); +#162945 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162946 = DIRECTION('',(0.,0.,1.)); +#162947 = ORIENTED_EDGE('',*,*,#162948,.T.); +#162948 = EDGE_CURVE('',#162940,#162455,#162949,.T.); +#162949 = LINE('',#162950,#162951); +#162950 = CARTESIAN_POINT('',(1.75,-0.25,2.85)); +#162951 = VECTOR('',#162952,1.); +#162952 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162953 = PLANE('',#162954); +#162954 = AXIS2_PLACEMENT_3D('',#162955,#162956,#162957); +#162955 = CARTESIAN_POINT('',(1.75,-1.421959173294,1.302213422577)); +#162956 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162957 = DIRECTION('',(0.,0.,1.)); +#162958 = ADVANCED_FACE('',(#162959),#162970,.F.); +#162959 = FACE_BOUND('',#162960,.F.); +#162960 = EDGE_LOOP('',(#162961,#162962,#162968,#162969)); +#162961 = ORIENTED_EDGE('',*,*,#162834,.F.); +#162962 = ORIENTED_EDGE('',*,*,#162963,.T.); +#162963 = EDGE_CURVE('',#162826,#162940,#162964,.T.); +#162964 = LINE('',#162965,#162966); +#162965 = CARTESIAN_POINT('',(2.25,-0.3,2.85)); +#162966 = VECTOR('',#162967,1.); +#162967 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162968 = ORIENTED_EDGE('',*,*,#162948,.T.); +#162969 = ORIENTED_EDGE('',*,*,#162454,.F.); +#162970 = PLANE('',#162971); +#162971 = AXIS2_PLACEMENT_3D('',#162972,#162973,#162974); +#162972 = CARTESIAN_POINT('',(2.25,-0.25,2.85)); +#162973 = DIRECTION('',(0.,0.,1.)); +#162974 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#162975 = ADVANCED_FACE('',(#162976),#163067,.F.); +#162976 = FACE_BOUND('',#162977,.F.); +#162977 = EDGE_LOOP('',(#162978,#162979,#162987,#162996,#163004,#163012, + #163020,#163028,#163036,#163044,#163052,#163061)); +#162978 = ORIENTED_EDGE('',*,*,#162490,.F.); +#162979 = ORIENTED_EDGE('',*,*,#162980,.T.); +#162980 = EDGE_CURVE('',#162491,#162981,#162983,.T.); +#162981 = VERTEX_POINT('',#162982); +#162982 = CARTESIAN_POINT('',(0.25,-0.3,3.35)); +#162983 = LINE('',#162984,#162985); +#162984 = CARTESIAN_POINT('',(0.25,-5.75,3.35)); +#162985 = VECTOR('',#162986,1.); +#162986 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#162987 = ORIENTED_EDGE('',*,*,#162988,.T.); +#162988 = EDGE_CURVE('',#162981,#162989,#162991,.T.); +#162989 = VERTEX_POINT('',#162990); +#162990 = CARTESIAN_POINT('',(0.25,0.25,2.8)); +#162991 = CIRCLE('',#162992,0.55); +#162992 = AXIS2_PLACEMENT_3D('',#162993,#162994,#162995); +#162993 = CARTESIAN_POINT('',(0.25,-0.3,2.8)); +#162994 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#162995 = DIRECTION('',(0.,0.,1.)); +#162996 = ORIENTED_EDGE('',*,*,#162997,.T.); +#162997 = EDGE_CURVE('',#162989,#162998,#163000,.T.); +#162998 = VERTEX_POINT('',#162999); +#162999 = CARTESIAN_POINT('',(0.25,0.25,-0.9)); +#163000 = LINE('',#163001,#163002); +#163001 = CARTESIAN_POINT('',(0.25,0.25,3.35)); +#163002 = VECTOR('',#163003,1.); +#163003 = DIRECTION('',(-0.,0.,-1.)); +#163004 = ORIENTED_EDGE('',*,*,#163005,.T.); +#163005 = EDGE_CURVE('',#162998,#163006,#163008,.T.); +#163006 = VERTEX_POINT('',#163007); +#163007 = CARTESIAN_POINT('',(0.25,-5.E-02,-1.5)); +#163008 = LINE('',#163009,#163010); +#163009 = CARTESIAN_POINT('',(0.25,0.25,-0.9)); +#163010 = VECTOR('',#163011,1.); +#163011 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#163012 = ORIENTED_EDGE('',*,*,#163013,.T.); +#163013 = EDGE_CURVE('',#163006,#163014,#163016,.T.); +#163014 = VERTEX_POINT('',#163015); +#163015 = CARTESIAN_POINT('',(0.25,0.218421052632,-3.2)); +#163016 = LINE('',#163017,#163018); +#163017 = CARTESIAN_POINT('',(0.25,-5.E-02,-1.5)); +#163018 = VECTOR('',#163019,1.); +#163019 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#163020 = ORIENTED_EDGE('',*,*,#163021,.T.); +#163021 = EDGE_CURVE('',#163014,#163022,#163024,.T.); +#163022 = VERTEX_POINT('',#163023); +#163023 = CARTESIAN_POINT('',(0.25,-0.281578947368,-3.2)); +#163024 = LINE('',#163025,#163026); +#163025 = CARTESIAN_POINT('',(0.25,0.25,-3.2)); +#163026 = VECTOR('',#163027,1.); +#163027 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163028 = ORIENTED_EDGE('',*,*,#163029,.T.); +#163029 = EDGE_CURVE('',#163022,#163030,#163032,.T.); +#163030 = VERTEX_POINT('',#163031); +#163031 = CARTESIAN_POINT('',(0.25,-0.55,-1.5)); +#163032 = LINE('',#163033,#163034); +#163033 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#163034 = VECTOR('',#163035,1.); +#163035 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#163036 = ORIENTED_EDGE('',*,*,#163037,.T.); +#163037 = EDGE_CURVE('',#163030,#163038,#163040,.T.); +#163038 = VERTEX_POINT('',#163039); +#163039 = CARTESIAN_POINT('',(0.25,-0.25,-0.9)); +#163040 = LINE('',#163041,#163042); +#163041 = CARTESIAN_POINT('',(0.25,-0.55,-1.5)); +#163042 = VECTOR('',#163043,1.); +#163043 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#163044 = ORIENTED_EDGE('',*,*,#163045,.T.); +#163045 = EDGE_CURVE('',#163038,#163046,#163048,.T.); +#163046 = VERTEX_POINT('',#163047); +#163047 = CARTESIAN_POINT('',(0.25,-0.25,2.8)); +#163048 = LINE('',#163049,#163050); +#163049 = CARTESIAN_POINT('',(0.25,-0.25,-0.9)); +#163050 = VECTOR('',#163051,1.); +#163051 = DIRECTION('',(0.,0.,1.)); +#163052 = ORIENTED_EDGE('',*,*,#163053,.F.); +#163053 = EDGE_CURVE('',#163054,#163046,#163056,.T.); +#163054 = VERTEX_POINT('',#163055); +#163055 = CARTESIAN_POINT('',(0.25,-0.3,2.85)); +#163056 = CIRCLE('',#163057,5.E-02); +#163057 = AXIS2_PLACEMENT_3D('',#163058,#163059,#163060); +#163058 = CARTESIAN_POINT('',(0.25,-0.3,2.8)); +#163059 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163060 = DIRECTION('',(0.,0.,1.)); +#163061 = ORIENTED_EDGE('',*,*,#163062,.T.); +#163062 = EDGE_CURVE('',#163054,#162493,#163063,.T.); +#163063 = LINE('',#163064,#163065); +#163064 = CARTESIAN_POINT('',(0.25,-0.25,2.85)); +#163065 = VECTOR('',#163066,1.); +#163066 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163067 = PLANE('',#163068); +#163068 = AXIS2_PLACEMENT_3D('',#163069,#163070,#163071); +#163069 = CARTESIAN_POINT('',(0.25,-1.421959173294,1.302213422577)); +#163070 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163071 = DIRECTION('',(0.,0.,1.)); +#163072 = ADVANCED_FACE('',(#163073),#163091,.F.); +#163073 = FACE_BOUND('',#163074,.F.); +#163074 = EDGE_LOOP('',(#163075,#163076,#163077,#163085)); +#163075 = ORIENTED_EDGE('',*,*,#162980,.F.); +#163076 = ORIENTED_EDGE('',*,*,#162516,.F.); +#163077 = ORIENTED_EDGE('',*,*,#163078,.T.); +#163078 = EDGE_CURVE('',#162509,#163079,#163081,.T.); +#163079 = VERTEX_POINT('',#163080); +#163080 = CARTESIAN_POINT('',(-0.25,-0.3,3.35)); +#163081 = LINE('',#163082,#163083); +#163082 = CARTESIAN_POINT('',(-0.25,-5.75,3.35)); +#163083 = VECTOR('',#163084,1.); +#163084 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163085 = ORIENTED_EDGE('',*,*,#163086,.F.); +#163086 = EDGE_CURVE('',#162981,#163079,#163087,.T.); +#163087 = LINE('',#163088,#163089); +#163088 = CARTESIAN_POINT('',(0.25,-0.3,3.35)); +#163089 = VECTOR('',#163090,1.); +#163090 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163091 = PLANE('',#163092); +#163092 = AXIS2_PLACEMENT_3D('',#163093,#163094,#163095); +#163093 = CARTESIAN_POINT('',(0.25,-5.75,3.35)); +#163094 = DIRECTION('',(-0.,0.,-1.)); +#163095 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163096 = ADVANCED_FACE('',(#163097),#163181,.T.); +#163097 = FACE_BOUND('',#163098,.T.); +#163098 = EDGE_LOOP('',(#163099,#163100,#163101,#163110,#163118,#163126, + #163134,#163142,#163150,#163158,#163166,#163175)); +#163099 = ORIENTED_EDGE('',*,*,#162508,.F.); +#163100 = ORIENTED_EDGE('',*,*,#163078,.T.); +#163101 = ORIENTED_EDGE('',*,*,#163102,.T.); +#163102 = EDGE_CURVE('',#163079,#163103,#163105,.T.); +#163103 = VERTEX_POINT('',#163104); +#163104 = CARTESIAN_POINT('',(-0.25,0.25,2.8)); +#163105 = CIRCLE('',#163106,0.55); +#163106 = AXIS2_PLACEMENT_3D('',#163107,#163108,#163109); +#163107 = CARTESIAN_POINT('',(-0.25,-0.3,2.8)); +#163108 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163109 = DIRECTION('',(0.,0.,1.)); +#163110 = ORIENTED_EDGE('',*,*,#163111,.T.); +#163111 = EDGE_CURVE('',#163103,#163112,#163114,.T.); +#163112 = VERTEX_POINT('',#163113); +#163113 = CARTESIAN_POINT('',(-0.25,0.25,-0.9)); +#163114 = LINE('',#163115,#163116); +#163115 = CARTESIAN_POINT('',(-0.25,0.25,3.35)); +#163116 = VECTOR('',#163117,1.); +#163117 = DIRECTION('',(-0.,0.,-1.)); +#163118 = ORIENTED_EDGE('',*,*,#163119,.T.); +#163119 = EDGE_CURVE('',#163112,#163120,#163122,.T.); +#163120 = VERTEX_POINT('',#163121); +#163121 = CARTESIAN_POINT('',(-0.25,-5.E-02,-1.5)); +#163122 = LINE('',#163123,#163124); +#163123 = CARTESIAN_POINT('',(-0.25,0.25,-0.9)); +#163124 = VECTOR('',#163125,1.); +#163125 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#163126 = ORIENTED_EDGE('',*,*,#163127,.T.); +#163127 = EDGE_CURVE('',#163120,#163128,#163130,.T.); +#163128 = VERTEX_POINT('',#163129); +#163129 = CARTESIAN_POINT('',(-0.25,0.218421052632,-3.2)); +#163130 = LINE('',#163131,#163132); +#163131 = CARTESIAN_POINT('',(-0.25,-5.E-02,-1.5)); +#163132 = VECTOR('',#163133,1.); +#163133 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#163134 = ORIENTED_EDGE('',*,*,#163135,.T.); +#163135 = EDGE_CURVE('',#163128,#163136,#163138,.T.); +#163136 = VERTEX_POINT('',#163137); +#163137 = CARTESIAN_POINT('',(-0.25,-0.281578947368,-3.2)); +#163138 = LINE('',#163139,#163140); +#163139 = CARTESIAN_POINT('',(-0.25,0.25,-3.2)); +#163140 = VECTOR('',#163141,1.); +#163141 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163142 = ORIENTED_EDGE('',*,*,#163143,.T.); +#163143 = EDGE_CURVE('',#163136,#163144,#163146,.T.); +#163144 = VERTEX_POINT('',#163145); +#163145 = CARTESIAN_POINT('',(-0.25,-0.55,-1.5)); +#163146 = LINE('',#163147,#163148); +#163147 = CARTESIAN_POINT('',(-0.25,-0.25,-3.4)); +#163148 = VECTOR('',#163149,1.); +#163149 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#163150 = ORIENTED_EDGE('',*,*,#163151,.T.); +#163151 = EDGE_CURVE('',#163144,#163152,#163154,.T.); +#163152 = VERTEX_POINT('',#163153); +#163153 = CARTESIAN_POINT('',(-0.25,-0.25,-0.9)); +#163154 = LINE('',#163155,#163156); +#163155 = CARTESIAN_POINT('',(-0.25,-0.55,-1.5)); +#163156 = VECTOR('',#163157,1.); +#163157 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#163158 = ORIENTED_EDGE('',*,*,#163159,.T.); +#163159 = EDGE_CURVE('',#163152,#163160,#163162,.T.); +#163160 = VERTEX_POINT('',#163161); +#163161 = CARTESIAN_POINT('',(-0.25,-0.25,2.8)); +#163162 = LINE('',#163163,#163164); +#163163 = CARTESIAN_POINT('',(-0.25,-0.25,-0.9)); +#163164 = VECTOR('',#163165,1.); +#163165 = DIRECTION('',(0.,0.,1.)); +#163166 = ORIENTED_EDGE('',*,*,#163167,.F.); +#163167 = EDGE_CURVE('',#163168,#163160,#163170,.T.); +#163168 = VERTEX_POINT('',#163169); +#163169 = CARTESIAN_POINT('',(-0.25,-0.3,2.85)); +#163170 = CIRCLE('',#163171,5.E-02); +#163171 = AXIS2_PLACEMENT_3D('',#163172,#163173,#163174); +#163172 = CARTESIAN_POINT('',(-0.25,-0.3,2.8)); +#163173 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163174 = DIRECTION('',(0.,0.,1.)); +#163175 = ORIENTED_EDGE('',*,*,#163176,.T.); +#163176 = EDGE_CURVE('',#163168,#162501,#163177,.T.); +#163177 = LINE('',#163178,#163179); +#163178 = CARTESIAN_POINT('',(-0.25,-0.25,2.85)); +#163179 = VECTOR('',#163180,1.); +#163180 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163181 = PLANE('',#163182); +#163182 = AXIS2_PLACEMENT_3D('',#163183,#163184,#163185); +#163183 = CARTESIAN_POINT('',(-0.25,-1.421959173294,1.302213422577)); +#163184 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163185 = DIRECTION('',(0.,0.,1.)); +#163186 = ADVANCED_FACE('',(#163187),#163198,.F.); +#163187 = FACE_BOUND('',#163188,.F.); +#163188 = EDGE_LOOP('',(#163189,#163190,#163196,#163197)); +#163189 = ORIENTED_EDGE('',*,*,#163062,.F.); +#163190 = ORIENTED_EDGE('',*,*,#163191,.T.); +#163191 = EDGE_CURVE('',#163054,#163168,#163192,.T.); +#163192 = LINE('',#163193,#163194); +#163193 = CARTESIAN_POINT('',(0.25,-0.3,2.85)); +#163194 = VECTOR('',#163195,1.); +#163195 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163196 = ORIENTED_EDGE('',*,*,#163176,.T.); +#163197 = ORIENTED_EDGE('',*,*,#162500,.F.); +#163198 = PLANE('',#163199); +#163199 = AXIS2_PLACEMENT_3D('',#163200,#163201,#163202); +#163200 = CARTESIAN_POINT('',(0.25,-0.25,2.85)); +#163201 = DIRECTION('',(0.,0.,1.)); +#163202 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163203 = ADVANCED_FACE('',(#163204),#163210,.F.); +#163204 = FACE_BOUND('',#163205,.F.); +#163205 = EDGE_LOOP('',(#163206,#163207,#163208,#163209)); +#163206 = ORIENTED_EDGE('',*,*,#162641,.T.); +#163207 = ORIENTED_EDGE('',*,*,#162624,.T.); +#163208 = ORIENTED_EDGE('',*,*,#162591,.F.); +#163209 = ORIENTED_EDGE('',*,*,#162576,.F.); +#163210 = PLANE('',#163211); +#163211 = AXIS2_PLACEMENT_3D('',#163212,#163213,#163214); +#163212 = CARTESIAN_POINT('',(0.25,-5.75,2.85)); +#163213 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163214 = DIRECTION('',(0.,-0.,1.)); +#163215 = ADVANCED_FACE('',(#163216),#163222,.F.); +#163216 = FACE_BOUND('',#163217,.F.); +#163217 = EDGE_LOOP('',(#163218,#163219,#163220,#163221)); +#163218 = ORIENTED_EDGE('',*,*,#162737,.T.); +#163219 = ORIENTED_EDGE('',*,*,#162720,.T.); +#163220 = ORIENTED_EDGE('',*,*,#162687,.F.); +#163221 = ORIENTED_EDGE('',*,*,#162672,.F.); +#163222 = PLANE('',#163223); +#163223 = AXIS2_PLACEMENT_3D('',#163224,#163225,#163226); +#163224 = CARTESIAN_POINT('',(2.25,-5.75,2.85)); +#163225 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163226 = DIRECTION('',(0.,-0.,1.)); +#163227 = ADVANCED_FACE('',(#163228),#163239,.F.); +#163228 = FACE_BOUND('',#163229,.F.); +#163229 = EDGE_LOOP('',(#163230,#163231,#163237,#163238)); +#163230 = ORIENTED_EDGE('',*,*,#162825,.T.); +#163231 = ORIENTED_EDGE('',*,*,#163232,.T.); +#163232 = EDGE_CURVE('',#162818,#162932,#163233,.T.); +#163233 = LINE('',#163234,#163235); +#163234 = CARTESIAN_POINT('',(2.25,-0.25,2.8)); +#163235 = VECTOR('',#163236,1.); +#163236 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163237 = ORIENTED_EDGE('',*,*,#162939,.F.); +#163238 = ORIENTED_EDGE('',*,*,#162963,.F.); +#163239 = CYLINDRICAL_SURFACE('',#163240,5.E-02); +#163240 = AXIS2_PLACEMENT_3D('',#163241,#163242,#163243); +#163241 = CARTESIAN_POINT('',(2.25,-0.3,2.8)); +#163242 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163243 = DIRECTION('',(0.,0.,1.)); +#163244 = ADVANCED_FACE('',(#163245),#163256,.F.); +#163245 = FACE_BOUND('',#163246,.F.); +#163246 = EDGE_LOOP('',(#163247,#163248,#163254,#163255)); +#163247 = ORIENTED_EDGE('',*,*,#162817,.F.); +#163248 = ORIENTED_EDGE('',*,*,#163249,.T.); +#163249 = EDGE_CURVE('',#162810,#162924,#163250,.T.); +#163250 = LINE('',#163251,#163252); +#163251 = CARTESIAN_POINT('',(2.25,-0.25,-0.9)); +#163252 = VECTOR('',#163253,1.); +#163253 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163254 = ORIENTED_EDGE('',*,*,#162931,.T.); +#163255 = ORIENTED_EDGE('',*,*,#163232,.F.); +#163256 = PLANE('',#163257); +#163257 = AXIS2_PLACEMENT_3D('',#163258,#163259,#163260); +#163258 = CARTESIAN_POINT('',(2.25,-0.25,-0.9)); +#163259 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163260 = DIRECTION('',(0.,-0.,1.)); +#163261 = ADVANCED_FACE('',(#163262),#163273,.F.); +#163262 = FACE_BOUND('',#163263,.F.); +#163263 = EDGE_LOOP('',(#163264,#163270,#163271,#163272)); +#163264 = ORIENTED_EDGE('',*,*,#163265,.T.); +#163265 = EDGE_CURVE('',#162802,#162916,#163266,.T.); +#163266 = LINE('',#163267,#163268); +#163267 = CARTESIAN_POINT('',(2.25,-0.55,-1.5)); +#163268 = VECTOR('',#163269,1.); +#163269 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163270 = ORIENTED_EDGE('',*,*,#162923,.T.); +#163271 = ORIENTED_EDGE('',*,*,#163249,.F.); +#163272 = ORIENTED_EDGE('',*,*,#162809,.F.); +#163273 = PLANE('',#163274); +#163274 = AXIS2_PLACEMENT_3D('',#163275,#163276,#163277); +#163275 = CARTESIAN_POINT('',(2.25,-0.55,-1.5)); +#163276 = DIRECTION('',(1.095357396528E-16,0.894427191,-0.4472135955)); +#163277 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#163278 = ADVANCED_FACE('',(#163279),#163306,.F.); +#163279 = FACE_BOUND('',#163280,.F.); +#163280 = EDGE_LOOP('',(#163281,#163282,#163290,#163298,#163304,#163305) + ); +#163281 = ORIENTED_EDGE('',*,*,#162801,.F.); +#163282 = ORIENTED_EDGE('',*,*,#163283,.F.); +#163283 = EDGE_CURVE('',#163284,#162794,#163286,.T.); +#163284 = VERTEX_POINT('',#163285); +#163285 = CARTESIAN_POINT('',(2.247552593066,-0.281192514695, + -3.202447406934)); +#163286 = LINE('',#163287,#163288); +#163287 = CARTESIAN_POINT('',(2.1292749658,-0.262517099863,-3.3207250342 + )); +#163288 = VECTOR('',#163289,1.); +#163289 = DIRECTION('',(0.702740385383,-0.110959008218,0.702740385383)); +#163290 = ORIENTED_EDGE('',*,*,#163291,.T.); +#163291 = EDGE_CURVE('',#163284,#163292,#163294,.T.); +#163292 = VERTEX_POINT('',#163293); +#163293 = CARTESIAN_POINT('',(1.752447406934,-0.281192514695, + -3.202447406934)); +#163294 = LINE('',#163295,#163296); +#163295 = CARTESIAN_POINT('',(2.25,-0.281192514695,-3.202447406934)); +#163296 = VECTOR('',#163297,1.); +#163297 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163298 = ORIENTED_EDGE('',*,*,#163299,.T.); +#163299 = EDGE_CURVE('',#163292,#162908,#163300,.T.); +#163300 = LINE('',#163301,#163302); +#163301 = CARTESIAN_POINT('',(1.994186046512,-0.243023255814, + -3.444186046512)); +#163302 = VECTOR('',#163303,1.); +#163303 = DIRECTION('',(-0.702740385383,-0.110959008218,0.702740385383) + ); +#163304 = ORIENTED_EDGE('',*,*,#162915,.T.); +#163305 = ORIENTED_EDGE('',*,*,#163265,.F.); +#163306 = PLANE('',#163307); +#163307 = AXIS2_PLACEMENT_3D('',#163308,#163309,#163310); +#163308 = CARTESIAN_POINT('',(2.25,-0.25,-3.4)); +#163309 = DIRECTION('',(1.209660753807E-16,0.987762965329,0.155962573473 + )); +#163310 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#163311 = ADVANCED_FACE('',(#163312),#163346,.T.); +#163312 = FACE_BOUND('',#163313,.F.); +#163313 = EDGE_LOOP('',(#163314,#163322,#163323,#163324,#163332,#163340) + ); +#163314 = ORIENTED_EDGE('',*,*,#163315,.T.); +#163315 = EDGE_CURVE('',#163316,#163284,#163318,.T.); +#163316 = VERTEX_POINT('',#163317); +#163317 = CARTESIAN_POINT('',(2.05,-5.E-02,-3.4)); +#163318 = LINE('',#163319,#163320); +#163319 = CARTESIAN_POINT('',(2.09198936903,-9.913946036316E-02, + -3.35801063097)); +#163320 = VECTOR('',#163321,1.); +#163321 = DIRECTION('',(0.544770019249,-0.63753529491,0.544770019249)); +#163322 = ORIENTED_EDGE('',*,*,#163283,.T.); +#163323 = ORIENTED_EDGE('',*,*,#162793,.F.); +#163324 = ORIENTED_EDGE('',*,*,#163325,.F.); +#163325 = EDGE_CURVE('',#163326,#162786,#163328,.T.); +#163326 = VERTEX_POINT('',#163327); +#163327 = CARTESIAN_POINT('',(2.247552593066,0.218807485305, + -3.202447406934)); +#163328 = LINE('',#163329,#163330); +#163329 = CARTESIAN_POINT('',(2.629616963064,0.158481532148, + -2.820383036936)); +#163330 = VECTOR('',#163331,1.); +#163331 = DIRECTION('',(0.702740385383,-0.110959008218,0.702740385383)); +#163332 = ORIENTED_EDGE('',*,*,#163333,.F.); +#163333 = EDGE_CURVE('',#163334,#163326,#163336,.T.); +#163334 = VERTEX_POINT('',#163335); +#163335 = CARTESIAN_POINT('',(2.05,5.E-02,-3.4)); +#163336 = LINE('',#163337,#163338); +#163337 = CARTESIAN_POINT('',(2.185852405654,0.166085051658, + -3.264147594346)); +#163338 = VECTOR('',#163339,1.); +#163339 = DIRECTION('',(0.605209817607,0.517148096144,0.605209817607)); +#163340 = ORIENTED_EDGE('',*,*,#163341,.T.); +#163341 = EDGE_CURVE('',#163334,#163316,#163342,.T.); +#163342 = LINE('',#163343,#163344); +#163343 = CARTESIAN_POINT('',(2.05,0.25,-3.4)); +#163344 = VECTOR('',#163345,1.); +#163345 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163346 = PLANE('',#163347); +#163347 = AXIS2_PLACEMENT_3D('',#163348,#163349,#163350); +#163348 = CARTESIAN_POINT('',(2.15,0.25,-3.3)); +#163349 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#163350 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#163351 = ADVANCED_FACE('',(#163352),#163377,.F.); +#163352 = FACE_BOUND('',#163353,.F.); +#163353 = EDGE_LOOP('',(#163354,#163355,#163361,#163362,#163370,#163376) + ); +#163354 = ORIENTED_EDGE('',*,*,#162785,.F.); +#163355 = ORIENTED_EDGE('',*,*,#163356,.T.); +#163356 = EDGE_CURVE('',#162778,#162892,#163357,.T.); +#163357 = LINE('',#163358,#163359); +#163358 = CARTESIAN_POINT('',(2.25,-5.E-02,-1.5)); +#163359 = VECTOR('',#163360,1.); +#163360 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163361 = ORIENTED_EDGE('',*,*,#162899,.T.); +#163362 = ORIENTED_EDGE('',*,*,#163363,.F.); +#163363 = EDGE_CURVE('',#163364,#162900,#163366,.T.); +#163364 = VERTEX_POINT('',#163365); +#163365 = CARTESIAN_POINT('',(1.752447406934,0.218807485305, + -3.202447406934)); +#163366 = LINE('',#163367,#163368); +#163367 = CARTESIAN_POINT('',(1.493844049248,0.177975376197, + -2.943844049248)); +#163368 = VECTOR('',#163369,1.); +#163369 = DIRECTION('',(-0.702740385383,-0.110959008218,0.702740385383) + ); +#163370 = ORIENTED_EDGE('',*,*,#163371,.F.); +#163371 = EDGE_CURVE('',#163326,#163364,#163372,.T.); +#163372 = LINE('',#163373,#163374); +#163373 = CARTESIAN_POINT('',(2.25,0.218807485305,-3.202447406934)); +#163374 = VECTOR('',#163375,1.); +#163375 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163376 = ORIENTED_EDGE('',*,*,#163325,.T.); +#163377 = PLANE('',#163378); +#163378 = AXIS2_PLACEMENT_3D('',#163379,#163380,#163381); +#163379 = CARTESIAN_POINT('',(2.25,-5.E-02,-1.5)); +#163380 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + -0.155962573473)); +#163381 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#163382 = ADVANCED_FACE('',(#163383),#163394,.F.); +#163383 = FACE_BOUND('',#163384,.F.); +#163384 = EDGE_LOOP('',(#163385,#163391,#163392,#163393)); +#163385 = ORIENTED_EDGE('',*,*,#163386,.T.); +#163386 = EDGE_CURVE('',#162770,#162884,#163387,.T.); +#163387 = LINE('',#163388,#163389); +#163388 = CARTESIAN_POINT('',(2.25,0.25,-0.9)); +#163389 = VECTOR('',#163390,1.); +#163390 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163391 = ORIENTED_EDGE('',*,*,#162891,.T.); +#163392 = ORIENTED_EDGE('',*,*,#163356,.F.); +#163393 = ORIENTED_EDGE('',*,*,#162777,.F.); +#163394 = PLANE('',#163395); +#163395 = AXIS2_PLACEMENT_3D('',#163396,#163397,#163398); +#163396 = CARTESIAN_POINT('',(2.25,0.25,-0.9)); +#163397 = DIRECTION('',(-1.095357396528E-16,-0.894427191,0.4472135955)); +#163398 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#163399 = ADVANCED_FACE('',(#163400),#163411,.F.); +#163400 = FACE_BOUND('',#163401,.F.); +#163401 = EDGE_LOOP('',(#163402,#163403,#163409,#163410)); +#163402 = ORIENTED_EDGE('',*,*,#162769,.F.); +#163403 = ORIENTED_EDGE('',*,*,#163404,.T.); +#163404 = EDGE_CURVE('',#162761,#162875,#163405,.T.); +#163405 = LINE('',#163406,#163407); +#163406 = CARTESIAN_POINT('',(2.25,0.25,2.8)); +#163407 = VECTOR('',#163408,1.); +#163408 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163409 = ORIENTED_EDGE('',*,*,#162883,.T.); +#163410 = ORIENTED_EDGE('',*,*,#163386,.F.); +#163411 = PLANE('',#163412); +#163412 = AXIS2_PLACEMENT_3D('',#163413,#163414,#163415); +#163413 = CARTESIAN_POINT('',(2.25,0.25,3.35)); +#163414 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163415 = DIRECTION('',(-0.,0.,-1.)); +#163416 = ADVANCED_FACE('',(#163417),#163423,.T.); +#163417 = FACE_BOUND('',#163418,.T.); +#163418 = EDGE_LOOP('',(#163419,#163420,#163421,#163422)); +#163419 = ORIENTED_EDGE('',*,*,#162760,.T.); +#163420 = ORIENTED_EDGE('',*,*,#163404,.T.); +#163421 = ORIENTED_EDGE('',*,*,#162874,.F.); +#163422 = ORIENTED_EDGE('',*,*,#162858,.F.); +#163423 = CYLINDRICAL_SURFACE('',#163424,0.55); +#163424 = AXIS2_PLACEMENT_3D('',#163425,#163426,#163427); +#163425 = CARTESIAN_POINT('',(2.25,-0.3,2.8)); +#163426 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163427 = DIRECTION('',(0.,0.,1.)); +#163428 = ADVANCED_FACE('',(#163429),#163456,.F.); +#163429 = FACE_BOUND('',#163430,.T.); +#163430 = EDGE_LOOP('',(#163431,#163439,#163440,#163441,#163442,#163450) + ); +#163431 = ORIENTED_EDGE('',*,*,#163432,.T.); +#163432 = EDGE_CURVE('',#163433,#163292,#163435,.T.); +#163433 = VERTEX_POINT('',#163434); +#163434 = CARTESIAN_POINT('',(1.95,-5.E-02,-3.4)); +#163435 = LINE('',#163436,#163437); +#163436 = CARTESIAN_POINT('',(1.982204224438,-1.231193164325E-02, + -3.432204224438)); +#163437 = VECTOR('',#163438,1.); +#163438 = DIRECTION('',(-0.544770019249,-0.63753529491,0.544770019249)); +#163439 = ORIENTED_EDGE('',*,*,#163299,.T.); +#163440 = ORIENTED_EDGE('',*,*,#162907,.F.); +#163441 = ORIENTED_EDGE('',*,*,#163363,.F.); +#163442 = ORIENTED_EDGE('',*,*,#163443,.F.); +#163443 = EDGE_CURVE('',#163444,#163364,#163446,.T.); +#163444 = VERTEX_POINT('',#163445); +#163445 = CARTESIAN_POINT('',(1.95,5.E-02,-3.4)); +#163446 = LINE('',#163447,#163448); +#163447 = CARTESIAN_POINT('',(1.905717325178,8.783927542193E-02, + -3.355717325178)); +#163448 = VECTOR('',#163449,1.); +#163449 = DIRECTION('',(-0.605209817607,0.517148096144,0.605209817607)); +#163450 = ORIENTED_EDGE('',*,*,#163451,.T.); +#163451 = EDGE_CURVE('',#163444,#163433,#163452,.T.); +#163452 = LINE('',#163453,#163454); +#163453 = CARTESIAN_POINT('',(1.95,0.25,-3.4)); +#163454 = VECTOR('',#163455,1.); +#163455 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163456 = PLANE('',#163457); +#163457 = AXIS2_PLACEMENT_3D('',#163458,#163459,#163460); +#163458 = CARTESIAN_POINT('',(1.85,0.25,-3.3)); +#163459 = DIRECTION('',(0.707106781187,-8.833102285013E-17, + 0.707106781187)); +#163460 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#163461 = ADVANCED_FACE('',(#163462),#163473,.F.); +#163462 = FACE_BOUND('',#163463,.F.); +#163463 = EDGE_LOOP('',(#163464,#163465,#163471,#163472)); +#163464 = ORIENTED_EDGE('',*,*,#163053,.T.); +#163465 = ORIENTED_EDGE('',*,*,#163466,.T.); +#163466 = EDGE_CURVE('',#163046,#163160,#163467,.T.); +#163467 = LINE('',#163468,#163469); +#163468 = CARTESIAN_POINT('',(0.25,-0.25,2.8)); +#163469 = VECTOR('',#163470,1.); +#163470 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163471 = ORIENTED_EDGE('',*,*,#163167,.F.); +#163472 = ORIENTED_EDGE('',*,*,#163191,.F.); +#163473 = CYLINDRICAL_SURFACE('',#163474,5.E-02); +#163474 = AXIS2_PLACEMENT_3D('',#163475,#163476,#163477); +#163475 = CARTESIAN_POINT('',(0.25,-0.3,2.8)); +#163476 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163477 = DIRECTION('',(0.,0.,1.)); +#163478 = ADVANCED_FACE('',(#163479),#163490,.F.); +#163479 = FACE_BOUND('',#163480,.F.); +#163480 = EDGE_LOOP('',(#163481,#163482,#163488,#163489)); +#163481 = ORIENTED_EDGE('',*,*,#163045,.F.); +#163482 = ORIENTED_EDGE('',*,*,#163483,.T.); +#163483 = EDGE_CURVE('',#163038,#163152,#163484,.T.); +#163484 = LINE('',#163485,#163486); +#163485 = CARTESIAN_POINT('',(0.25,-0.25,-0.9)); +#163486 = VECTOR('',#163487,1.); +#163487 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163488 = ORIENTED_EDGE('',*,*,#163159,.T.); +#163489 = ORIENTED_EDGE('',*,*,#163466,.F.); +#163490 = PLANE('',#163491); +#163491 = AXIS2_PLACEMENT_3D('',#163492,#163493,#163494); +#163492 = CARTESIAN_POINT('',(0.25,-0.25,-0.9)); +#163493 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#163494 = DIRECTION('',(0.,-0.,1.)); +#163495 = ADVANCED_FACE('',(#163496),#163507,.F.); +#163496 = FACE_BOUND('',#163497,.F.); +#163497 = EDGE_LOOP('',(#163498,#163504,#163505,#163506)); +#163498 = ORIENTED_EDGE('',*,*,#163499,.T.); +#163499 = EDGE_CURVE('',#163030,#163144,#163500,.T.); +#163500 = LINE('',#163501,#163502); +#163501 = CARTESIAN_POINT('',(0.25,-0.55,-1.5)); +#163502 = VECTOR('',#163503,1.); +#163503 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163504 = ORIENTED_EDGE('',*,*,#163151,.T.); +#163505 = ORIENTED_EDGE('',*,*,#163483,.F.); +#163506 = ORIENTED_EDGE('',*,*,#163037,.F.); +#163507 = PLANE('',#163508); +#163508 = AXIS2_PLACEMENT_3D('',#163509,#163510,#163511); +#163509 = CARTESIAN_POINT('',(0.25,-0.55,-1.5)); +#163510 = DIRECTION('',(1.095357396528E-16,0.894427191,-0.4472135955)); +#163511 = DIRECTION('',(5.476786982641E-17,0.4472135955,0.894427191)); +#163512 = ADVANCED_FACE('',(#163513),#163540,.F.); +#163513 = FACE_BOUND('',#163514,.F.); +#163514 = EDGE_LOOP('',(#163515,#163516,#163524,#163532,#163538,#163539) + ); +#163515 = ORIENTED_EDGE('',*,*,#163029,.F.); +#163516 = ORIENTED_EDGE('',*,*,#163517,.F.); +#163517 = EDGE_CURVE('',#163518,#163022,#163520,.T.); +#163518 = VERTEX_POINT('',#163519); +#163519 = CARTESIAN_POINT('',(0.247552593066,-0.281192514695, + -3.202447406934)); +#163520 = LINE('',#163521,#163522); +#163521 = CARTESIAN_POINT('',(0.1292749658,-0.262517099863,-3.3207250342 + )); +#163522 = VECTOR('',#163523,1.); +#163523 = DIRECTION('',(0.702740385383,-0.110959008218,0.702740385383)); +#163524 = ORIENTED_EDGE('',*,*,#163525,.T.); +#163525 = EDGE_CURVE('',#163518,#163526,#163528,.T.); +#163526 = VERTEX_POINT('',#163527); +#163527 = CARTESIAN_POINT('',(-0.247552593066,-0.281192514695, + -3.202447406934)); +#163528 = LINE('',#163529,#163530); +#163529 = CARTESIAN_POINT('',(0.25,-0.281192514695,-3.202447406934)); +#163530 = VECTOR('',#163531,1.); +#163531 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163532 = ORIENTED_EDGE('',*,*,#163533,.T.); +#163533 = EDGE_CURVE('',#163526,#163136,#163534,.T.); +#163534 = LINE('',#163535,#163536); +#163535 = CARTESIAN_POINT('',(-5.813953488372E-03,-0.243023255814, + -3.444186046512)); +#163536 = VECTOR('',#163537,1.); +#163537 = DIRECTION('',(-0.702740385383,-0.110959008218,0.702740385383) + ); +#163538 = ORIENTED_EDGE('',*,*,#163143,.T.); +#163539 = ORIENTED_EDGE('',*,*,#163499,.F.); +#163540 = PLANE('',#163541); +#163541 = AXIS2_PLACEMENT_3D('',#163542,#163543,#163544); +#163542 = CARTESIAN_POINT('',(0.25,-0.25,-3.4)); +#163543 = DIRECTION('',(1.209660753807E-16,0.987762965329,0.155962573473 + )); +#163544 = DIRECTION('',(-1.909990663905E-17,-0.155962573473, + 0.987762965329)); +#163545 = ADVANCED_FACE('',(#163546),#163580,.T.); +#163546 = FACE_BOUND('',#163547,.F.); +#163547 = EDGE_LOOP('',(#163548,#163556,#163557,#163558,#163566,#163574) + ); +#163548 = ORIENTED_EDGE('',*,*,#163549,.T.); +#163549 = EDGE_CURVE('',#163550,#163518,#163552,.T.); +#163550 = VERTEX_POINT('',#163551); +#163551 = CARTESIAN_POINT('',(5.E-02,-5.E-02,-3.4)); +#163552 = LINE('',#163553,#163554); +#163553 = CARTESIAN_POINT('',(9.198936903048E-02,-9.913946036316E-02, + -3.35801063097)); +#163554 = VECTOR('',#163555,1.); +#163555 = DIRECTION('',(0.544770019249,-0.63753529491,0.544770019249)); +#163556 = ORIENTED_EDGE('',*,*,#163517,.T.); +#163557 = ORIENTED_EDGE('',*,*,#163021,.F.); +#163558 = ORIENTED_EDGE('',*,*,#163559,.F.); +#163559 = EDGE_CURVE('',#163560,#163014,#163562,.T.); +#163560 = VERTEX_POINT('',#163561); +#163561 = CARTESIAN_POINT('',(0.247552593066,0.218807485305, + -3.202447406934)); +#163562 = LINE('',#163563,#163564); +#163563 = CARTESIAN_POINT('',(0.629616963064,0.158481532148, + -2.820383036936)); +#163564 = VECTOR('',#163565,1.); +#163565 = DIRECTION('',(0.702740385383,-0.110959008218,0.702740385383)); +#163566 = ORIENTED_EDGE('',*,*,#163567,.F.); +#163567 = EDGE_CURVE('',#163568,#163560,#163570,.T.); +#163568 = VERTEX_POINT('',#163569); +#163569 = CARTESIAN_POINT('',(5.E-02,5.E-02,-3.4)); +#163570 = LINE('',#163571,#163572); +#163571 = CARTESIAN_POINT('',(0.185852405654,0.166085051658, + -3.264147594346)); +#163572 = VECTOR('',#163573,1.); +#163573 = DIRECTION('',(0.605209817607,0.517148096144,0.605209817607)); +#163574 = ORIENTED_EDGE('',*,*,#163575,.T.); +#163575 = EDGE_CURVE('',#163568,#163550,#163576,.T.); +#163576 = LINE('',#163577,#163578); +#163577 = CARTESIAN_POINT('',(5.E-02,0.25,-3.4)); +#163578 = VECTOR('',#163579,1.); +#163579 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163580 = PLANE('',#163581); +#163581 = AXIS2_PLACEMENT_3D('',#163582,#163583,#163584); +#163582 = CARTESIAN_POINT('',(0.15,0.25,-3.3)); +#163583 = DIRECTION('',(0.707106781187,-8.486018839685E-17, + -0.707106781187)); +#163584 = DIRECTION('',(1.212375546256E-16,1.,1.227125289196E-18)); +#163585 = ADVANCED_FACE('',(#163586),#163611,.F.); +#163586 = FACE_BOUND('',#163587,.F.); +#163587 = EDGE_LOOP('',(#163588,#163589,#163595,#163596,#163604,#163610) + ); +#163588 = ORIENTED_EDGE('',*,*,#163013,.F.); +#163589 = ORIENTED_EDGE('',*,*,#163590,.T.); +#163590 = EDGE_CURVE('',#163006,#163120,#163591,.T.); +#163591 = LINE('',#163592,#163593); +#163592 = CARTESIAN_POINT('',(0.25,-5.E-02,-1.5)); +#163593 = VECTOR('',#163594,1.); +#163594 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163595 = ORIENTED_EDGE('',*,*,#163127,.T.); +#163596 = ORIENTED_EDGE('',*,*,#163597,.F.); +#163597 = EDGE_CURVE('',#163598,#163128,#163600,.T.); +#163598 = VERTEX_POINT('',#163599); +#163599 = CARTESIAN_POINT('',(-0.247552593066,0.218807485305, + -3.202447406934)); +#163600 = LINE('',#163601,#163602); +#163601 = CARTESIAN_POINT('',(-0.506155950752,0.177975376197, + -2.943844049248)); +#163602 = VECTOR('',#163603,1.); +#163603 = DIRECTION('',(-0.702740385383,-0.110959008218,0.702740385383) + ); +#163604 = ORIENTED_EDGE('',*,*,#163605,.F.); +#163605 = EDGE_CURVE('',#163560,#163598,#163606,.T.); +#163606 = LINE('',#163607,#163608); +#163607 = CARTESIAN_POINT('',(0.25,0.218807485305,-3.202447406934)); +#163608 = VECTOR('',#163609,1.); +#163609 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163610 = ORIENTED_EDGE('',*,*,#163559,.T.); +#163611 = PLANE('',#163612); +#163612 = AXIS2_PLACEMENT_3D('',#163613,#163614,#163615); +#163613 = CARTESIAN_POINT('',(0.25,-5.E-02,-1.5)); +#163614 = DIRECTION('',(-1.209660753807E-16,-0.987762965329, + -0.155962573473)); +#163615 = DIRECTION('',(1.909990663905E-17,0.155962573473, + -0.987762965329)); +#163616 = ADVANCED_FACE('',(#163617),#163628,.F.); +#163617 = FACE_BOUND('',#163618,.F.); +#163618 = EDGE_LOOP('',(#163619,#163625,#163626,#163627)); +#163619 = ORIENTED_EDGE('',*,*,#163620,.T.); +#163620 = EDGE_CURVE('',#162998,#163112,#163621,.T.); +#163621 = LINE('',#163622,#163623); +#163622 = CARTESIAN_POINT('',(0.25,0.25,-0.9)); +#163623 = VECTOR('',#163624,1.); +#163624 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163625 = ORIENTED_EDGE('',*,*,#163119,.T.); +#163626 = ORIENTED_EDGE('',*,*,#163590,.F.); +#163627 = ORIENTED_EDGE('',*,*,#163005,.F.); +#163628 = PLANE('',#163629); +#163629 = AXIS2_PLACEMENT_3D('',#163630,#163631,#163632); +#163630 = CARTESIAN_POINT('',(0.25,0.25,-0.9)); +#163631 = DIRECTION('',(-1.095357396528E-16,-0.894427191,0.4472135955)); +#163632 = DIRECTION('',(-5.476786982641E-17,-0.4472135955,-0.894427191) + ); +#163633 = ADVANCED_FACE('',(#163634),#163645,.F.); +#163634 = FACE_BOUND('',#163635,.F.); +#163635 = EDGE_LOOP('',(#163636,#163637,#163643,#163644)); +#163636 = ORIENTED_EDGE('',*,*,#162997,.F.); +#163637 = ORIENTED_EDGE('',*,*,#163638,.T.); +#163638 = EDGE_CURVE('',#162989,#163103,#163639,.T.); +#163639 = LINE('',#163640,#163641); +#163640 = CARTESIAN_POINT('',(0.25,0.25,2.8)); +#163641 = VECTOR('',#163642,1.); +#163642 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163643 = ORIENTED_EDGE('',*,*,#163111,.T.); +#163644 = ORIENTED_EDGE('',*,*,#163620,.F.); +#163645 = PLANE('',#163646); +#163646 = AXIS2_PLACEMENT_3D('',#163647,#163648,#163649); +#163647 = CARTESIAN_POINT('',(0.25,0.25,3.35)); +#163648 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163649 = DIRECTION('',(-0.,0.,-1.)); +#163650 = ADVANCED_FACE('',(#163651),#163657,.T.); +#163651 = FACE_BOUND('',#163652,.T.); +#163652 = EDGE_LOOP('',(#163653,#163654,#163655,#163656)); +#163653 = ORIENTED_EDGE('',*,*,#162988,.T.); +#163654 = ORIENTED_EDGE('',*,*,#163638,.T.); +#163655 = ORIENTED_EDGE('',*,*,#163102,.F.); +#163656 = ORIENTED_EDGE('',*,*,#163086,.F.); +#163657 = CYLINDRICAL_SURFACE('',#163658,0.55); +#163658 = AXIS2_PLACEMENT_3D('',#163659,#163660,#163661); +#163659 = CARTESIAN_POINT('',(0.25,-0.3,2.8)); +#163660 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163661 = DIRECTION('',(0.,0.,1.)); +#163662 = ADVANCED_FACE('',(#163663),#163690,.F.); +#163663 = FACE_BOUND('',#163664,.T.); +#163664 = EDGE_LOOP('',(#163665,#163673,#163674,#163675,#163676,#163684) + ); +#163665 = ORIENTED_EDGE('',*,*,#163666,.T.); +#163666 = EDGE_CURVE('',#163667,#163526,#163669,.T.); +#163667 = VERTEX_POINT('',#163668); +#163668 = CARTESIAN_POINT('',(-5.E-02,-5.E-02,-3.4)); +#163669 = LINE('',#163670,#163671); +#163670 = CARTESIAN_POINT('',(-1.77957755624E-02,-1.231193164325E-02, + -3.432204224438)); +#163671 = VECTOR('',#163672,1.); +#163672 = DIRECTION('',(-0.544770019249,-0.63753529491,0.544770019249)); +#163673 = ORIENTED_EDGE('',*,*,#163533,.T.); +#163674 = ORIENTED_EDGE('',*,*,#163135,.F.); +#163675 = ORIENTED_EDGE('',*,*,#163597,.F.); +#163676 = ORIENTED_EDGE('',*,*,#163677,.F.); +#163677 = EDGE_CURVE('',#163678,#163598,#163680,.T.); +#163678 = VERTEX_POINT('',#163679); +#163679 = CARTESIAN_POINT('',(-5.E-02,5.E-02,-3.4)); +#163680 = LINE('',#163681,#163682); +#163681 = CARTESIAN_POINT('',(-9.428267482221E-02,8.783927542193E-02, + -3.355717325178)); +#163682 = VECTOR('',#163683,1.); +#163683 = DIRECTION('',(-0.605209817607,0.517148096144,0.605209817607)); +#163684 = ORIENTED_EDGE('',*,*,#163685,.T.); +#163685 = EDGE_CURVE('',#163678,#163667,#163686,.T.); +#163686 = LINE('',#163687,#163688); +#163687 = CARTESIAN_POINT('',(-5.E-02,0.25,-3.4)); +#163688 = VECTOR('',#163689,1.); +#163689 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163690 = PLANE('',#163691); +#163691 = AXIS2_PLACEMENT_3D('',#163692,#163693,#163694); +#163692 = CARTESIAN_POINT('',(-0.15,0.25,-3.3)); +#163693 = DIRECTION('',(0.707106781187,-8.833102285013E-17, + 0.707106781187)); +#163694 = DIRECTION('',(1.236918052038E-16,1.,1.227125289097E-18)); +#163695 = ADVANCED_FACE('',(#163696),#163707,.T.); +#163696 = FACE_BOUND('',#163697,.F.); +#163697 = EDGE_LOOP('',(#163698,#163699,#163705,#163706)); +#163698 = ORIENTED_EDGE('',*,*,#163315,.F.); +#163699 = ORIENTED_EDGE('',*,*,#163700,.T.); +#163700 = EDGE_CURVE('',#163316,#163433,#163701,.T.); +#163701 = LINE('',#163702,#163703); +#163702 = CARTESIAN_POINT('',(2.25,-5.E-02,-3.4)); +#163703 = VECTOR('',#163704,1.); +#163704 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163705 = ORIENTED_EDGE('',*,*,#163432,.T.); +#163706 = ORIENTED_EDGE('',*,*,#163291,.F.); +#163707 = PLANE('',#163708); +#163708 = AXIS2_PLACEMENT_3D('',#163709,#163710,#163711); +#163709 = CARTESIAN_POINT('',(2.25,-0.165596257347,-3.301223703467)); +#163710 = DIRECTION('',(-8.302774088379E-17,-0.64962967394, + -0.760250805153)); +#163711 = DIRECTION('',(1.,-1.247195775152E-16,-2.638869166629E-18)); +#163712 = ADVANCED_FACE('',(#163713),#163724,.F.); +#163713 = FACE_BOUND('',#163714,.F.); +#163714 = EDGE_LOOP('',(#163715,#163716,#163717,#163723)); +#163715 = ORIENTED_EDGE('',*,*,#163700,.F.); +#163716 = ORIENTED_EDGE('',*,*,#163341,.F.); +#163717 = ORIENTED_EDGE('',*,*,#163718,.T.); +#163718 = EDGE_CURVE('',#163334,#163444,#163719,.T.); +#163719 = LINE('',#163720,#163721); +#163720 = CARTESIAN_POINT('',(2.25,5.E-02,-3.4)); +#163721 = VECTOR('',#163722,1.); +#163722 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163723 = ORIENTED_EDGE('',*,*,#163451,.T.); +#163724 = PLANE('',#163725); +#163725 = AXIS2_PLACEMENT_3D('',#163726,#163727,#163728); +#163726 = CARTESIAN_POINT('',(2.25,0.25,-3.4)); +#163727 = DIRECTION('',(0.,0.,1.)); +#163728 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163729 = ADVANCED_FACE('',(#163730),#163736,.T.); +#163730 = FACE_BOUND('',#163731,.T.); +#163731 = EDGE_LOOP('',(#163732,#163733,#163734,#163735)); +#163732 = ORIENTED_EDGE('',*,*,#163333,.F.); +#163733 = ORIENTED_EDGE('',*,*,#163718,.T.); +#163734 = ORIENTED_EDGE('',*,*,#163443,.T.); +#163735 = ORIENTED_EDGE('',*,*,#163371,.F.); +#163736 = PLANE('',#163737); +#163737 = AXIS2_PLACEMENT_3D('',#163738,#163739,#163740); +#163738 = CARTESIAN_POINT('',(2.25,0.134403742653,-3.301223703467)); +#163739 = DIRECTION('',(9.136856246232E-17,0.760250805153,-0.64962967394 + )); +#163740 = DIRECTION('',(-1.,1.211454098155E-16,1.127308249542E-18)); +#163741 = ADVANCED_FACE('',(#163742),#163753,.T.); +#163742 = FACE_BOUND('',#163743,.F.); +#163743 = EDGE_LOOP('',(#163744,#163745,#163751,#163752)); +#163744 = ORIENTED_EDGE('',*,*,#163549,.F.); +#163745 = ORIENTED_EDGE('',*,*,#163746,.T.); +#163746 = EDGE_CURVE('',#163550,#163667,#163747,.T.); +#163747 = LINE('',#163748,#163749); +#163748 = CARTESIAN_POINT('',(0.25,-5.E-02,-3.4)); +#163749 = VECTOR('',#163750,1.); +#163750 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163751 = ORIENTED_EDGE('',*,*,#163666,.T.); +#163752 = ORIENTED_EDGE('',*,*,#163525,.F.); +#163753 = PLANE('',#163754); +#163754 = AXIS2_PLACEMENT_3D('',#163755,#163756,#163757); +#163755 = CARTESIAN_POINT('',(0.25,-0.165596257347,-3.301223703467)); +#163756 = DIRECTION('',(-8.302774088379E-17,-0.64962967394, + -0.760250805153)); +#163757 = DIRECTION('',(1.,-1.247195775152E-16,-2.638869166629E-18)); +#163758 = ADVANCED_FACE('',(#163759),#163770,.F.); +#163759 = FACE_BOUND('',#163760,.F.); +#163760 = EDGE_LOOP('',(#163761,#163762,#163763,#163769)); +#163761 = ORIENTED_EDGE('',*,*,#163746,.F.); +#163762 = ORIENTED_EDGE('',*,*,#163575,.F.); +#163763 = ORIENTED_EDGE('',*,*,#163764,.T.); +#163764 = EDGE_CURVE('',#163568,#163678,#163765,.T.); +#163765 = LINE('',#163766,#163767); +#163766 = CARTESIAN_POINT('',(0.25,5.E-02,-3.4)); +#163767 = VECTOR('',#163768,1.); +#163768 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#163769 = ORIENTED_EDGE('',*,*,#163685,.T.); +#163770 = PLANE('',#163771); +#163771 = AXIS2_PLACEMENT_3D('',#163772,#163773,#163774); +#163772 = CARTESIAN_POINT('',(0.25,0.25,-3.4)); +#163773 = DIRECTION('',(0.,0.,1.)); +#163774 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#163775 = ADVANCED_FACE('',(#163776),#163782,.T.); +#163776 = FACE_BOUND('',#163777,.T.); +#163777 = EDGE_LOOP('',(#163778,#163779,#163780,#163781)); +#163778 = ORIENTED_EDGE('',*,*,#163567,.F.); +#163779 = ORIENTED_EDGE('',*,*,#163764,.T.); +#163780 = ORIENTED_EDGE('',*,*,#163677,.T.); +#163781 = ORIENTED_EDGE('',*,*,#163605,.F.); +#163782 = PLANE('',#163783); +#163783 = AXIS2_PLACEMENT_3D('',#163784,#163785,#163786); +#163784 = CARTESIAN_POINT('',(0.25,0.134403742653,-3.301223703467)); +#163785 = DIRECTION('',(9.136856246232E-17,0.760250805153,-0.64962967394 + )); +#163786 = DIRECTION('',(-1.,1.211454098155E-16,1.127308249542E-18)); +#163787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#163791)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#163788,#163789,#163790)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#163788 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#163789 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#163790 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#163791 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#163788, + 'distance_accuracy_value','confusion accuracy'); +#163792 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#163793,#163795); +#163793 = ( REPRESENTATION_RELATIONSHIP('','',#160292,#160269) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#163794) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#163794 = ITEM_DEFINED_TRANSFORMATION('','',#11,#160270); +#163795 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #163796); +#163796 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('71','=>[0:1:1:38]','',#160264, + #160287,$); +#163797 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#160289)); +#163798 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#163799,#163801); +#163799 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#163800) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#163800 = ITEM_DEFINED_TRANSFORMATION('','',#11,#223); +#163801 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #163802); +#163802 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('73','C_VIN_2','',#5,#32437,$); +#163803 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#163804,#163806); +#163804 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#163805) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#163805 = ITEM_DEFINED_TRANSFORMATION('','',#11,#227); +#163806 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #163807); +#163807 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('74','C_VIN_1','',#5,#155569,$ + ); +#163808 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#163809,#163811); +#163809 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#163810) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#163810 = ITEM_DEFINED_TRANSFORMATION('','',#11,#231); +#163811 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #163812); +#163812 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('75','C_BUCK_OUT1','',#5, + #155569,$); +#163813 = SHAPE_DEFINITION_REPRESENTATION(#163814,#163820); +#163814 = PRODUCT_DEFINITION_SHAPE('','',#163815); +#163815 = PRODUCT_DEFINITION('design','',#163816,#163819); +#163816 = PRODUCT_DEFINITION_FORMATION('','',#163817); +#163817 = PRODUCT('SOT-323_SC-70','SOT-323_SC-70','',(#163818)); +#163818 = PRODUCT_CONTEXT('',#2,'mechanical'); +#163819 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#163820 = SHAPE_REPRESENTATION('',(#11,#163821),#163825); +#163821 = AXIS2_PLACEMENT_3D('',#163822,#163823,#163824); +#163822 = CARTESIAN_POINT('',(0.,0.,0.)); +#163823 = DIRECTION('',(0.,0.,1.)); +#163824 = DIRECTION('',(1.,0.,-0.)); +#163825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#163829)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#163826,#163827,#163828)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#163826 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#163827 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#163828 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#163829 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#163826, + 'distance_accuracy_value','confusion accuracy'); +#163830 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#163831,#163833); +#163831 = ( REPRESENTATION_RELATIONSHIP('','',#163820,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#163832) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#163832 = ITEM_DEFINED_TRANSFORMATION('','',#11,#235); +#163833 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #163834); +#163834 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('77','D_INV_ISO1','',#5,#163815 + ,$); +#163835 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#163817)); +#163836 = SHAPE_DEFINITION_REPRESENTATION(#163837,#163843); +#163837 = PRODUCT_DEFINITION_SHAPE('','',#163838); +#163838 = PRODUCT_DEFINITION('design','',#163839,#163842); +#163839 = PRODUCT_DEFINITION_FORMATION('','',#163840); +#163840 = PRODUCT('SOT-323_SC-70','SOT-323_SC-70','',(#163841)); +#163841 = PRODUCT_CONTEXT('',#2,'mechanical'); +#163842 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#163843 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#163844),#165977); +#163844 = MANIFOLD_SOLID_BREP('',#163845); +#163845 = CLOSED_SHELL('',(#163846,#163884,#163947,#163970,#163999, + #164054,#164077,#164100,#164123,#164162,#164179,#164202,#164290, + #164307,#164337,#164368,#164399,#164430,#164453,#164469,#164492, + #164509,#164540,#164570,#164587,#164632,#164686,#164709,#164732, + #164755,#164794,#164832,#164917,#164961,#165053,#165078,#165162, + #165179,#165264,#165281,#165366,#165391,#165468,#165485,#165504, + #165550,#165566,#165582,#165599,#165616,#165633,#165650,#165667, + #165684,#165701,#165713,#165725,#165742,#165759,#165776,#165793, + #165810,#165827,#165844,#165856,#165873,#165890,#165907,#165924, + #165941,#165958,#165970)); +#163846 = ADVANCED_FACE('',(#163847),#163879,.F.); +#163847 = FACE_BOUND('',#163848,.F.); +#163848 = EDGE_LOOP('',(#163849,#163859,#163866,#163874)); +#163849 = ORIENTED_EDGE('',*,*,#163850,.T.); +#163850 = EDGE_CURVE('',#163851,#163853,#163855,.T.); +#163851 = VERTEX_POINT('',#163852); +#163852 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#163853 = VERTEX_POINT('',#163854); +#163854 = CARTESIAN_POINT('',(-0.451352968955,0.92770593791,0.1)); +#163855 = LINE('',#163856,#163857); +#163856 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#163857 = VECTOR('',#163858,1.); +#163858 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163859 = ORIENTED_EDGE('',*,*,#163860,.T.); +#163860 = EDGE_CURVE('',#163853,#163861,#163863,.T.); +#163861 = VERTEX_POINT('',#163862); +#163862 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163863 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#163864,#163865), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#163864 = CARTESIAN_POINT('',(-0.451352968955,0.92770593791,0.1)); +#163865 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163866 = ORIENTED_EDGE('',*,*,#163867,.F.); +#163867 = EDGE_CURVE('',#163868,#163861,#163870,.T.); +#163868 = VERTEX_POINT('',#163869); +#163869 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#163870 = LINE('',#163871,#163872); +#163871 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#163872 = VECTOR('',#163873,1.); +#163873 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163874 = ORIENTED_EDGE('',*,*,#163875,.F.); +#163875 = EDGE_CURVE('',#163851,#163868,#163876,.T.); +#163876 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#163877,#163878), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#163877 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#163878 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#163879 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#163880,#163881) + ,(#163882,#163883 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#163880 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#163881 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#163882 = CARTESIAN_POINT('',(-0.451352968955,0.92770593791,0.1)); +#163883 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163884 = ADVANCED_FACE('',(#163885),#163942,.F.); +#163885 = FACE_BOUND('',#163886,.T.); +#163886 = EDGE_LOOP('',(#163887,#163888,#163896,#163904,#163912,#163920, + #163928,#163936)); +#163887 = ORIENTED_EDGE('',*,*,#163850,.T.); +#163888 = ORIENTED_EDGE('',*,*,#163889,.T.); +#163889 = EDGE_CURVE('',#163853,#163890,#163892,.T.); +#163890 = VERTEX_POINT('',#163891); +#163891 = CARTESIAN_POINT('',(0.451352968955,0.92770593791,0.1)); +#163892 = LINE('',#163893,#163894); +#163893 = CARTESIAN_POINT('',(-0.451352968955,0.92770593791,0.1)); +#163894 = VECTOR('',#163895,1.); +#163895 = DIRECTION('',(1.,0.,0.)); +#163896 = ORIENTED_EDGE('',*,*,#163897,.T.); +#163897 = EDGE_CURVE('',#163890,#163898,#163900,.T.); +#163898 = VERTEX_POINT('',#163899); +#163899 = CARTESIAN_POINT('',(0.55270593791,0.826352968955,0.1)); +#163900 = LINE('',#163901,#163902); +#163901 = CARTESIAN_POINT('',(0.451352968955,0.92770593791,0.1)); +#163902 = VECTOR('',#163903,1.); +#163903 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#163904 = ORIENTED_EDGE('',*,*,#163905,.T.); +#163905 = EDGE_CURVE('',#163898,#163906,#163908,.T.); +#163906 = VERTEX_POINT('',#163907); +#163907 = CARTESIAN_POINT('',(0.55270593791,-0.826352968955,0.1)); +#163908 = LINE('',#163909,#163910); +#163909 = CARTESIAN_POINT('',(0.55270593791,0.826352968955,0.1)); +#163910 = VECTOR('',#163911,1.); +#163911 = DIRECTION('',(0.,-1.,0.)); +#163912 = ORIENTED_EDGE('',*,*,#163913,.T.); +#163913 = EDGE_CURVE('',#163906,#163914,#163916,.T.); +#163914 = VERTEX_POINT('',#163915); +#163915 = CARTESIAN_POINT('',(0.451352968955,-0.92770593791,0.1)); +#163916 = LINE('',#163917,#163918); +#163917 = CARTESIAN_POINT('',(0.55270593791,-0.826352968955,0.1)); +#163918 = VECTOR('',#163919,1.); +#163919 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#163920 = ORIENTED_EDGE('',*,*,#163921,.T.); +#163921 = EDGE_CURVE('',#163914,#163922,#163924,.T.); +#163922 = VERTEX_POINT('',#163923); +#163923 = CARTESIAN_POINT('',(-0.451352968955,-0.92770593791,0.1)); +#163924 = LINE('',#163925,#163926); +#163925 = CARTESIAN_POINT('',(0.451352968955,-0.92770593791,0.1)); +#163926 = VECTOR('',#163927,1.); +#163927 = DIRECTION('',(-1.,0.,0.)); +#163928 = ORIENTED_EDGE('',*,*,#163929,.T.); +#163929 = EDGE_CURVE('',#163922,#163930,#163932,.T.); +#163930 = VERTEX_POINT('',#163931); +#163931 = CARTESIAN_POINT('',(-0.55270593791,-0.826352968955,0.1)); +#163932 = LINE('',#163933,#163934); +#163933 = CARTESIAN_POINT('',(-0.451352968955,-0.92770593791,0.1)); +#163934 = VECTOR('',#163935,1.); +#163935 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#163936 = ORIENTED_EDGE('',*,*,#163937,.T.); +#163937 = EDGE_CURVE('',#163930,#163851,#163938,.T.); +#163938 = LINE('',#163939,#163940); +#163939 = CARTESIAN_POINT('',(-0.55270593791,-0.826352968955,0.1)); +#163940 = VECTOR('',#163941,1.); +#163941 = DIRECTION('',(0.,1.,0.)); +#163942 = PLANE('',#163943); +#163943 = AXIS2_PLACEMENT_3D('',#163944,#163945,#163946); +#163944 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#163945 = DIRECTION('',(-0.,0.,1.)); +#163946 = DIRECTION('',(0.496787623368,-0.867872143388,0.)); +#163947 = ADVANCED_FACE('',(#163948),#163965,.F.); +#163948 = FACE_BOUND('',#163949,.F.); +#163949 = EDGE_LOOP('',(#163950,#163951,#163958,#163964)); +#163950 = ORIENTED_EDGE('',*,*,#163889,.T.); +#163951 = ORIENTED_EDGE('',*,*,#163952,.T.); +#163952 = EDGE_CURVE('',#163890,#163953,#163955,.T.); +#163953 = VERTEX_POINT('',#163954); +#163954 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#163955 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#163956,#163957), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#163956 = CARTESIAN_POINT('',(0.451352968955,0.92770593791,0.1)); +#163957 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#163958 = ORIENTED_EDGE('',*,*,#163959,.F.); +#163959 = EDGE_CURVE('',#163861,#163953,#163960,.T.); +#163960 = LINE('',#163961,#163962); +#163961 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163962 = VECTOR('',#163963,1.); +#163963 = DIRECTION('',(1.,0.,0.)); +#163964 = ORIENTED_EDGE('',*,*,#163860,.F.); +#163965 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#163966,#163967) + ,(#163968,#163969 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.975),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#163966 = CARTESIAN_POINT('',(-0.451352968955,0.92770593791,0.1)); +#163967 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163968 = CARTESIAN_POINT('',(0.451352968955,0.92770593791,0.1)); +#163969 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#163970 = ADVANCED_FACE('',(#163971),#163994,.F.); +#163971 = FACE_BOUND('',#163972,.F.); +#163972 = EDGE_LOOP('',(#163973,#163974,#163981,#163989)); +#163973 = ORIENTED_EDGE('',*,*,#163867,.T.); +#163974 = ORIENTED_EDGE('',*,*,#163975,.T.); +#163975 = EDGE_CURVE('',#163861,#163976,#163978,.T.); +#163976 = VERTEX_POINT('',#163977); +#163977 = CARTESIAN_POINT('',(-0.4875,1.,0.69)); +#163978 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#163979,#163980), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#163979 = CARTESIAN_POINT('',(-0.4875,1.,0.51)); +#163980 = CARTESIAN_POINT('',(-0.4875,1.,0.69)); +#163981 = ORIENTED_EDGE('',*,*,#163982,.F.); +#163982 = EDGE_CURVE('',#163983,#163976,#163985,.T.); +#163983 = VERTEX_POINT('',#163984); +#163984 = CARTESIAN_POINT('',(-0.625,0.8625,0.69)); +#163985 = LINE('',#163986,#163987); +#163986 = CARTESIAN_POINT('',(-0.625,0.8625,0.69)); +#163987 = VECTOR('',#163988,1.); +#163988 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163989 = ORIENTED_EDGE('',*,*,#163990,.F.); +#163990 = EDGE_CURVE('',#163868,#163983,#163991,.T.); +#163991 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#163992,#163993), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#163992 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#163993 = CARTESIAN_POINT('',(-0.625,0.8625,0.69)); +#163994 = PLANE('',#163995); +#163995 = AXIS2_PLACEMENT_3D('',#163996,#163997,#163998); +#163996 = CARTESIAN_POINT('',(-0.625,0.8625,0.69)); +#163997 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#163998 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#163999 = ADVANCED_FACE('',(#164000),#164049,.F.); +#164000 = FACE_BOUND('',#164001,.F.); +#164001 = EDGE_LOOP('',(#164002,#164003,#164004,#164012,#164020,#164028, + #164036,#164044)); +#164002 = ORIENTED_EDGE('',*,*,#163937,.T.); +#164003 = ORIENTED_EDGE('',*,*,#163875,.T.); +#164004 = ORIENTED_EDGE('',*,*,#164005,.F.); +#164005 = EDGE_CURVE('',#164006,#163868,#164008,.T.); +#164006 = VERTEX_POINT('',#164007); +#164007 = CARTESIAN_POINT('',(-0.625,0.8125,0.51)); +#164008 = LINE('',#164009,#164010); +#164009 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164010 = VECTOR('',#164011,1.); +#164011 = DIRECTION('',(0.,1.,0.)); +#164012 = ORIENTED_EDGE('',*,*,#164013,.F.); +#164013 = EDGE_CURVE('',#164014,#164006,#164016,.T.); +#164014 = VERTEX_POINT('',#164015); +#164015 = CARTESIAN_POINT('',(-0.625,0.4875,0.51)); +#164016 = LINE('',#164017,#164018); +#164017 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164018 = VECTOR('',#164019,1.); +#164019 = DIRECTION('',(0.,1.,0.)); +#164020 = ORIENTED_EDGE('',*,*,#164021,.F.); +#164021 = EDGE_CURVE('',#164022,#164014,#164024,.T.); +#164022 = VERTEX_POINT('',#164023); +#164023 = CARTESIAN_POINT('',(-0.625,-0.4875,0.51)); +#164024 = LINE('',#164025,#164026); +#164025 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164026 = VECTOR('',#164027,1.); +#164027 = DIRECTION('',(0.,1.,0.)); +#164028 = ORIENTED_EDGE('',*,*,#164029,.F.); +#164029 = EDGE_CURVE('',#164030,#164022,#164032,.T.); +#164030 = VERTEX_POINT('',#164031); +#164031 = CARTESIAN_POINT('',(-0.625,-0.8125,0.51)); +#164032 = LINE('',#164033,#164034); +#164033 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164034 = VECTOR('',#164035,1.); +#164035 = DIRECTION('',(0.,1.,0.)); +#164036 = ORIENTED_EDGE('',*,*,#164037,.F.); +#164037 = EDGE_CURVE('',#164038,#164030,#164040,.T.); +#164038 = VERTEX_POINT('',#164039); +#164039 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164040 = LINE('',#164041,#164042); +#164041 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164042 = VECTOR('',#164043,1.); +#164043 = DIRECTION('',(0.,1.,0.)); +#164044 = ORIENTED_EDGE('',*,*,#164045,.F.); +#164045 = EDGE_CURVE('',#163930,#164038,#164046,.T.); +#164046 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164047,#164048), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164047 = CARTESIAN_POINT('',(-0.55270593791,-0.826352968955,0.1)); +#164048 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164049 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164050,#164051) + ,(#164052,#164053 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.725),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164050 = CARTESIAN_POINT('',(-0.55270593791,-0.826352968955,0.1)); +#164051 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164052 = CARTESIAN_POINT('',(-0.55270593791,0.826352968955,0.1)); +#164053 = CARTESIAN_POINT('',(-0.625,0.8625,0.51)); +#164054 = ADVANCED_FACE('',(#164055),#164072,.F.); +#164055 = FACE_BOUND('',#164056,.F.); +#164056 = EDGE_LOOP('',(#164057,#164058,#164059,#164067)); +#164057 = ORIENTED_EDGE('',*,*,#163929,.T.); +#164058 = ORIENTED_EDGE('',*,*,#164045,.T.); +#164059 = ORIENTED_EDGE('',*,*,#164060,.F.); +#164060 = EDGE_CURVE('',#164061,#164038,#164063,.T.); +#164061 = VERTEX_POINT('',#164062); +#164062 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164063 = LINE('',#164064,#164065); +#164064 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164065 = VECTOR('',#164066,1.); +#164066 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164067 = ORIENTED_EDGE('',*,*,#164068,.F.); +#164068 = EDGE_CURVE('',#163922,#164061,#164069,.T.); +#164069 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164070,#164071), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164070 = CARTESIAN_POINT('',(-0.451352968955,-0.92770593791,0.1)); +#164071 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164072 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164073,#164074) + ,(#164075,#164076 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#164073 = CARTESIAN_POINT('',(-0.451352968955,-0.92770593791,0.1)); +#164074 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164075 = CARTESIAN_POINT('',(-0.55270593791,-0.826352968955,0.1)); +#164076 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164077 = ADVANCED_FACE('',(#164078),#164095,.F.); +#164078 = FACE_BOUND('',#164079,.F.); +#164079 = EDGE_LOOP('',(#164080,#164081,#164088,#164094)); +#164080 = ORIENTED_EDGE('',*,*,#163897,.T.); +#164081 = ORIENTED_EDGE('',*,*,#164082,.T.); +#164082 = EDGE_CURVE('',#163898,#164083,#164085,.T.); +#164083 = VERTEX_POINT('',#164084); +#164084 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164085 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164086,#164087), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164086 = CARTESIAN_POINT('',(0.55270593791,0.826352968955,0.1)); +#164087 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164088 = ORIENTED_EDGE('',*,*,#164089,.F.); +#164089 = EDGE_CURVE('',#163953,#164083,#164090,.T.); +#164090 = LINE('',#164091,#164092); +#164091 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#164092 = VECTOR('',#164093,1.); +#164093 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164094 = ORIENTED_EDGE('',*,*,#163952,.F.); +#164095 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164096,#164097) + ,(#164098,#164099 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#164096 = CARTESIAN_POINT('',(0.451352968955,0.92770593791,0.1)); +#164097 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#164098 = CARTESIAN_POINT('',(0.55270593791,0.826352968955,0.1)); +#164099 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164100 = ADVANCED_FACE('',(#164101),#164118,.F.); +#164101 = FACE_BOUND('',#164102,.F.); +#164102 = EDGE_LOOP('',(#164103,#164104,#164105,#164113)); +#164103 = ORIENTED_EDGE('',*,*,#163921,.T.); +#164104 = ORIENTED_EDGE('',*,*,#164068,.T.); +#164105 = ORIENTED_EDGE('',*,*,#164106,.F.); +#164106 = EDGE_CURVE('',#164107,#164061,#164109,.T.); +#164107 = VERTEX_POINT('',#164108); +#164108 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164109 = LINE('',#164110,#164111); +#164110 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164111 = VECTOR('',#164112,1.); +#164112 = DIRECTION('',(-1.,0.,0.)); +#164113 = ORIENTED_EDGE('',*,*,#164114,.F.); +#164114 = EDGE_CURVE('',#163914,#164107,#164115,.T.); +#164115 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164116,#164117), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164116 = CARTESIAN_POINT('',(0.451352968955,-0.92770593791,0.1)); +#164117 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164118 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164119,#164120) + ,(#164121,#164122 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.975),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164119 = CARTESIAN_POINT('',(0.451352968955,-0.92770593791,0.1)); +#164120 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164121 = CARTESIAN_POINT('',(-0.451352968955,-0.92770593791,0.1)); +#164122 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164123 = ADVANCED_FACE('',(#164124),#164157,.F.); +#164124 = FACE_BOUND('',#164125,.F.); +#164125 = EDGE_LOOP('',(#164126,#164127,#164134,#164142,#164150,#164156) + ); +#164126 = ORIENTED_EDGE('',*,*,#163905,.T.); +#164127 = ORIENTED_EDGE('',*,*,#164128,.T.); +#164128 = EDGE_CURVE('',#163906,#164129,#164131,.T.); +#164129 = VERTEX_POINT('',#164130); +#164130 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164131 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164132,#164133), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164132 = CARTESIAN_POINT('',(0.55270593791,-0.826352968955,0.1)); +#164133 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164134 = ORIENTED_EDGE('',*,*,#164135,.F.); +#164135 = EDGE_CURVE('',#164136,#164129,#164138,.T.); +#164136 = VERTEX_POINT('',#164137); +#164137 = CARTESIAN_POINT('',(0.625,-0.1625,0.51)); +#164138 = LINE('',#164139,#164140); +#164139 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164140 = VECTOR('',#164141,1.); +#164141 = DIRECTION('',(0.,-1.,0.)); +#164142 = ORIENTED_EDGE('',*,*,#164143,.F.); +#164143 = EDGE_CURVE('',#164144,#164136,#164146,.T.); +#164144 = VERTEX_POINT('',#164145); +#164145 = CARTESIAN_POINT('',(0.625,0.1625,0.51)); +#164146 = LINE('',#164147,#164148); +#164147 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164148 = VECTOR('',#164149,1.); +#164149 = DIRECTION('',(0.,-1.,0.)); +#164150 = ORIENTED_EDGE('',*,*,#164151,.F.); +#164151 = EDGE_CURVE('',#164083,#164144,#164152,.T.); +#164152 = LINE('',#164153,#164154); +#164153 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164154 = VECTOR('',#164155,1.); +#164155 = DIRECTION('',(0.,-1.,0.)); +#164156 = ORIENTED_EDGE('',*,*,#164082,.F.); +#164157 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164158,#164159) + ,(#164160,#164161 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.725),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164158 = CARTESIAN_POINT('',(0.55270593791,0.826352968955,0.1)); +#164159 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164160 = CARTESIAN_POINT('',(0.55270593791,-0.826352968955,0.1)); +#164161 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164162 = ADVANCED_FACE('',(#164163),#164174,.F.); +#164163 = FACE_BOUND('',#164164,.F.); +#164164 = EDGE_LOOP('',(#164165,#164166,#164167,#164173)); +#164165 = ORIENTED_EDGE('',*,*,#163913,.T.); +#164166 = ORIENTED_EDGE('',*,*,#164114,.T.); +#164167 = ORIENTED_EDGE('',*,*,#164168,.F.); +#164168 = EDGE_CURVE('',#164129,#164107,#164169,.T.); +#164169 = LINE('',#164170,#164171); +#164170 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164171 = VECTOR('',#164172,1.); +#164172 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#164173 = ORIENTED_EDGE('',*,*,#164128,.F.); +#164174 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164175,#164176) + ,(#164177,#164178 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#164175 = CARTESIAN_POINT('',(0.55270593791,-0.826352968955,0.1)); +#164176 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164177 = CARTESIAN_POINT('',(0.451352968955,-0.92770593791,0.1)); +#164178 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164179 = ADVANCED_FACE('',(#164180),#164197,.F.); +#164180 = FACE_BOUND('',#164181,.F.); +#164181 = EDGE_LOOP('',(#164182,#164183,#164190,#164196)); +#164182 = ORIENTED_EDGE('',*,*,#163959,.T.); +#164183 = ORIENTED_EDGE('',*,*,#164184,.T.); +#164184 = EDGE_CURVE('',#163953,#164185,#164187,.T.); +#164185 = VERTEX_POINT('',#164186); +#164186 = CARTESIAN_POINT('',(0.4875,1.,0.69)); +#164187 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164188,#164189), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164188 = CARTESIAN_POINT('',(0.4875,1.,0.51)); +#164189 = CARTESIAN_POINT('',(0.4875,1.,0.69)); +#164190 = ORIENTED_EDGE('',*,*,#164191,.F.); +#164191 = EDGE_CURVE('',#163976,#164185,#164192,.T.); +#164192 = LINE('',#164193,#164194); +#164193 = CARTESIAN_POINT('',(-0.4875,1.,0.69)); +#164194 = VECTOR('',#164195,1.); +#164195 = DIRECTION('',(1.,0.,0.)); +#164196 = ORIENTED_EDGE('',*,*,#163975,.F.); +#164197 = PLANE('',#164198); +#164198 = AXIS2_PLACEMENT_3D('',#164199,#164200,#164201); +#164199 = CARTESIAN_POINT('',(-0.4875,1.,0.69)); +#164200 = DIRECTION('',(0.,-1.,0.)); +#164201 = DIRECTION('',(1.,0.,0.)); +#164202 = ADVANCED_FACE('',(#164203),#164285,.F.); +#164203 = FACE_BOUND('',#164204,.F.); +#164204 = EDGE_LOOP('',(#164205,#164213,#164214,#164215,#164223,#164231, + #164239,#164247,#164255,#164263,#164271,#164279)); +#164205 = ORIENTED_EDGE('',*,*,#164206,.T.); +#164206 = EDGE_CURVE('',#164207,#163983,#164209,.T.); +#164207 = VERTEX_POINT('',#164208); +#164208 = CARTESIAN_POINT('',(-0.625,0.8125,0.69)); +#164209 = LINE('',#164210,#164211); +#164210 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164211 = VECTOR('',#164212,1.); +#164212 = DIRECTION('',(0.,1.,0.)); +#164213 = ORIENTED_EDGE('',*,*,#163982,.T.); +#164214 = ORIENTED_EDGE('',*,*,#164191,.T.); +#164215 = ORIENTED_EDGE('',*,*,#164216,.T.); +#164216 = EDGE_CURVE('',#164185,#164217,#164219,.T.); +#164217 = VERTEX_POINT('',#164218); +#164218 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164219 = LINE('',#164220,#164221); +#164220 = CARTESIAN_POINT('',(0.4875,1.,0.69)); +#164221 = VECTOR('',#164222,1.); +#164222 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164223 = ORIENTED_EDGE('',*,*,#164224,.T.); +#164224 = EDGE_CURVE('',#164217,#164225,#164227,.T.); +#164225 = VERTEX_POINT('',#164226); +#164226 = CARTESIAN_POINT('',(0.625,0.1625,0.69)); +#164227 = LINE('',#164228,#164229); +#164228 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164229 = VECTOR('',#164230,1.); +#164230 = DIRECTION('',(0.,-1.,0.)); +#164231 = ORIENTED_EDGE('',*,*,#164232,.T.); +#164232 = EDGE_CURVE('',#164225,#164233,#164235,.T.); +#164233 = VERTEX_POINT('',#164234); +#164234 = CARTESIAN_POINT('',(0.575,0.1625,0.69)); +#164235 = LINE('',#164236,#164237); +#164236 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.69)); +#164237 = VECTOR('',#164238,1.); +#164238 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#164239 = ORIENTED_EDGE('',*,*,#164240,.F.); +#164240 = EDGE_CURVE('',#164241,#164233,#164243,.T.); +#164241 = VERTEX_POINT('',#164242); +#164242 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164243 = LINE('',#164244,#164245); +#164244 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164245 = VECTOR('',#164246,1.); +#164246 = DIRECTION('',(0.,-1.,0.)); +#164247 = ORIENTED_EDGE('',*,*,#164248,.F.); +#164248 = EDGE_CURVE('',#164249,#164241,#164251,.T.); +#164249 = VERTEX_POINT('',#164250); +#164250 = CARTESIAN_POINT('',(0.4625,0.95,0.69)); +#164251 = LINE('',#164252,#164253); +#164252 = CARTESIAN_POINT('',(0.4625,0.95,0.69)); +#164253 = VECTOR('',#164254,1.); +#164254 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164255 = ORIENTED_EDGE('',*,*,#164256,.F.); +#164256 = EDGE_CURVE('',#164257,#164249,#164259,.T.); +#164257 = VERTEX_POINT('',#164258); +#164258 = CARTESIAN_POINT('',(-0.4625,0.95,0.69)); +#164259 = LINE('',#164260,#164261); +#164260 = CARTESIAN_POINT('',(-0.4625,0.95,0.69)); +#164261 = VECTOR('',#164262,1.); +#164262 = DIRECTION('',(1.,0.,0.)); +#164263 = ORIENTED_EDGE('',*,*,#164264,.F.); +#164264 = EDGE_CURVE('',#164265,#164257,#164267,.T.); +#164265 = VERTEX_POINT('',#164266); +#164266 = CARTESIAN_POINT('',(-0.575,0.8375,0.69)); +#164267 = LINE('',#164268,#164269); +#164268 = CARTESIAN_POINT('',(-0.575,0.8375,0.69)); +#164269 = VECTOR('',#164270,1.); +#164270 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#164271 = ORIENTED_EDGE('',*,*,#164272,.F.); +#164272 = EDGE_CURVE('',#164273,#164265,#164275,.T.); +#164273 = VERTEX_POINT('',#164274); +#164274 = CARTESIAN_POINT('',(-0.575,0.8125,0.69)); +#164275 = LINE('',#164276,#164277); +#164276 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164277 = VECTOR('',#164278,1.); +#164278 = DIRECTION('',(0.,1.,0.)); +#164279 = ORIENTED_EDGE('',*,*,#164280,.F.); +#164280 = EDGE_CURVE('',#164207,#164273,#164281,.T.); +#164281 = LINE('',#164282,#164283); +#164282 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.69)); +#164283 = VECTOR('',#164284,1.); +#164284 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164285 = PLANE('',#164286); +#164286 = AXIS2_PLACEMENT_3D('',#164287,#164288,#164289); +#164287 = CARTESIAN_POINT('',(-0.5375,0.9125,0.69)); +#164288 = DIRECTION('',(1.727070457764E-15,-1.698411050721E-15,-1.)); +#164289 = DIRECTION('',(0.707106781187,0.707106781187,2.026526106489E-17 + )); +#164290 = ADVANCED_FACE('',(#164291),#164302,.F.); +#164291 = FACE_BOUND('',#164292,.F.); +#164292 = EDGE_LOOP('',(#164293,#164299,#164300,#164301)); +#164293 = ORIENTED_EDGE('',*,*,#164294,.F.); +#164294 = EDGE_CURVE('',#164006,#164207,#164295,.T.); +#164295 = LINE('',#164296,#164297); +#164296 = CARTESIAN_POINT('',(-0.625,0.8125,0.547147124163)); +#164297 = VECTOR('',#164298,1.); +#164298 = DIRECTION('',(0.,0.,1.)); +#164299 = ORIENTED_EDGE('',*,*,#164005,.T.); +#164300 = ORIENTED_EDGE('',*,*,#163990,.T.); +#164301 = ORIENTED_EDGE('',*,*,#164206,.F.); +#164302 = PLANE('',#164303); +#164303 = AXIS2_PLACEMENT_3D('',#164304,#164305,#164306); +#164304 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164305 = DIRECTION('',(1.,0.,0.)); +#164306 = DIRECTION('',(-0.,1.,0.)); +#164307 = ADVANCED_FACE('',(#164308),#164332,.F.); +#164308 = FACE_BOUND('',#164309,.F.); +#164309 = EDGE_LOOP('',(#164310,#164317,#164318,#164326)); +#164310 = ORIENTED_EDGE('',*,*,#164311,.F.); +#164311 = EDGE_CURVE('',#164038,#164312,#164314,.T.); +#164312 = VERTEX_POINT('',#164313); +#164313 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164314 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164315,#164316), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164315 = CARTESIAN_POINT('',(-0.625,-0.8625,0.51)); +#164316 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164317 = ORIENTED_EDGE('',*,*,#164037,.T.); +#164318 = ORIENTED_EDGE('',*,*,#164319,.T.); +#164319 = EDGE_CURVE('',#164030,#164320,#164322,.T.); +#164320 = VERTEX_POINT('',#164321); +#164321 = CARTESIAN_POINT('',(-0.625,-0.8125,0.69)); +#164322 = LINE('',#164323,#164324); +#164323 = CARTESIAN_POINT('',(-0.625,-0.8125,0.547147124163)); +#164324 = VECTOR('',#164325,1.); +#164325 = DIRECTION('',(0.,0.,1.)); +#164326 = ORIENTED_EDGE('',*,*,#164327,.F.); +#164327 = EDGE_CURVE('',#164312,#164320,#164328,.T.); +#164328 = LINE('',#164329,#164330); +#164329 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164330 = VECTOR('',#164331,1.); +#164331 = DIRECTION('',(0.,1.,0.)); +#164332 = PLANE('',#164333); +#164333 = AXIS2_PLACEMENT_3D('',#164334,#164335,#164336); +#164334 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164335 = DIRECTION('',(1.,0.,0.)); +#164336 = DIRECTION('',(-0.,1.,0.)); +#164337 = ADVANCED_FACE('',(#164338),#164363,.F.); +#164338 = FACE_BOUND('',#164339,.F.); +#164339 = EDGE_LOOP('',(#164340,#164348,#164349,#164357)); +#164340 = ORIENTED_EDGE('',*,*,#164341,.F.); +#164341 = EDGE_CURVE('',#164030,#164342,#164344,.T.); +#164342 = VERTEX_POINT('',#164343); +#164343 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.51)); +#164344 = LINE('',#164345,#164346); +#164345 = CARTESIAN_POINT('',(-0.525,-0.8125,0.51)); +#164346 = VECTOR('',#164347,1.); +#164347 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164348 = ORIENTED_EDGE('',*,*,#164029,.T.); +#164349 = ORIENTED_EDGE('',*,*,#164350,.T.); +#164350 = EDGE_CURVE('',#164022,#164351,#164353,.T.); +#164351 = VERTEX_POINT('',#164352); +#164352 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.51)); +#164353 = LINE('',#164354,#164355); +#164354 = CARTESIAN_POINT('',(-0.525,-0.4875,0.51)); +#164355 = VECTOR('',#164356,1.); +#164356 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164357 = ORIENTED_EDGE('',*,*,#164358,.F.); +#164358 = EDGE_CURVE('',#164342,#164351,#164359,.T.); +#164359 = LINE('',#164360,#164361); +#164360 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.51)); +#164361 = VECTOR('',#164362,1.); +#164362 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#164363 = PLANE('',#164364); +#164364 = AXIS2_PLACEMENT_3D('',#164365,#164366,#164367); +#164365 = CARTESIAN_POINT('',(-0.525,-0.8125,0.51)); +#164366 = DIRECTION('',(0.,0.,1.)); +#164367 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164368 = ADVANCED_FACE('',(#164369),#164394,.F.); +#164369 = FACE_BOUND('',#164370,.F.); +#164370 = EDGE_LOOP('',(#164371,#164379,#164380,#164388)); +#164371 = ORIENTED_EDGE('',*,*,#164372,.F.); +#164372 = EDGE_CURVE('',#164022,#164373,#164375,.T.); +#164373 = VERTEX_POINT('',#164374); +#164374 = CARTESIAN_POINT('',(-0.625,-0.4875,0.69)); +#164375 = LINE('',#164376,#164377); +#164376 = CARTESIAN_POINT('',(-0.625,-0.4875,0.547147124163)); +#164377 = VECTOR('',#164378,1.); +#164378 = DIRECTION('',(0.,0.,1.)); +#164379 = ORIENTED_EDGE('',*,*,#164021,.T.); +#164380 = ORIENTED_EDGE('',*,*,#164381,.T.); +#164381 = EDGE_CURVE('',#164014,#164382,#164384,.T.); +#164382 = VERTEX_POINT('',#164383); +#164383 = CARTESIAN_POINT('',(-0.625,0.4875,0.69)); +#164384 = LINE('',#164385,#164386); +#164385 = CARTESIAN_POINT('',(-0.625,0.4875,0.547147124163)); +#164386 = VECTOR('',#164387,1.); +#164387 = DIRECTION('',(0.,0.,1.)); +#164388 = ORIENTED_EDGE('',*,*,#164389,.F.); +#164389 = EDGE_CURVE('',#164373,#164382,#164390,.T.); +#164390 = LINE('',#164391,#164392); +#164391 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164392 = VECTOR('',#164393,1.); +#164393 = DIRECTION('',(0.,1.,0.)); +#164394 = PLANE('',#164395); +#164395 = AXIS2_PLACEMENT_3D('',#164396,#164397,#164398); +#164396 = CARTESIAN_POINT('',(-0.625,-0.8625,0.69)); +#164397 = DIRECTION('',(1.,0.,0.)); +#164398 = DIRECTION('',(-0.,1.,0.)); +#164399 = ADVANCED_FACE('',(#164400),#164425,.F.); +#164400 = FACE_BOUND('',#164401,.F.); +#164401 = EDGE_LOOP('',(#164402,#164410,#164411,#164419)); +#164402 = ORIENTED_EDGE('',*,*,#164403,.F.); +#164403 = EDGE_CURVE('',#164014,#164404,#164406,.T.); +#164404 = VERTEX_POINT('',#164405); +#164405 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.51)); +#164406 = LINE('',#164407,#164408); +#164407 = CARTESIAN_POINT('',(-0.525,0.4875,0.51)); +#164408 = VECTOR('',#164409,1.); +#164409 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164410 = ORIENTED_EDGE('',*,*,#164013,.T.); +#164411 = ORIENTED_EDGE('',*,*,#164412,.T.); +#164412 = EDGE_CURVE('',#164006,#164413,#164415,.T.); +#164413 = VERTEX_POINT('',#164414); +#164414 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.51)); +#164415 = LINE('',#164416,#164417); +#164416 = CARTESIAN_POINT('',(-0.525,0.8125,0.51)); +#164417 = VECTOR('',#164418,1.); +#164418 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164419 = ORIENTED_EDGE('',*,*,#164420,.F.); +#164420 = EDGE_CURVE('',#164404,#164413,#164421,.T.); +#164421 = LINE('',#164422,#164423); +#164422 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.51)); +#164423 = VECTOR('',#164424,1.); +#164424 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#164425 = PLANE('',#164426); +#164426 = AXIS2_PLACEMENT_3D('',#164427,#164428,#164429); +#164427 = CARTESIAN_POINT('',(-0.525,0.4875,0.51)); +#164428 = DIRECTION('',(0.,0.,1.)); +#164429 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164430 = ADVANCED_FACE('',(#164431),#164448,.F.); +#164431 = FACE_BOUND('',#164432,.F.); +#164432 = EDGE_LOOP('',(#164433,#164434,#164435,#164443)); +#164433 = ORIENTED_EDGE('',*,*,#164060,.T.); +#164434 = ORIENTED_EDGE('',*,*,#164311,.T.); +#164435 = ORIENTED_EDGE('',*,*,#164436,.F.); +#164436 = EDGE_CURVE('',#164437,#164312,#164439,.T.); +#164437 = VERTEX_POINT('',#164438); +#164438 = CARTESIAN_POINT('',(-0.4875,-1.,0.69)); +#164439 = LINE('',#164440,#164441); +#164440 = CARTESIAN_POINT('',(-0.4875,-1.,0.69)); +#164441 = VECTOR('',#164442,1.); +#164442 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164443 = ORIENTED_EDGE('',*,*,#164444,.F.); +#164444 = EDGE_CURVE('',#164061,#164437,#164445,.T.); +#164445 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164446,#164447), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164446 = CARTESIAN_POINT('',(-0.4875,-1.,0.51)); +#164447 = CARTESIAN_POINT('',(-0.4875,-1.,0.69)); +#164448 = PLANE('',#164449); +#164449 = AXIS2_PLACEMENT_3D('',#164450,#164451,#164452); +#164450 = CARTESIAN_POINT('',(-0.4875,-1.,0.69)); +#164451 = DIRECTION('',(0.707106781187,0.707106781187,2.180683970393E-16 + )); +#164452 = DIRECTION('',(-0.707106781187,0.707106781187, + -3.597884849611E-33)); +#164453 = ADVANCED_FACE('',(#164454),#164464,.F.); +#164454 = FACE_BOUND('',#164455,.F.); +#164455 = EDGE_LOOP('',(#164456,#164457,#164462,#164463)); +#164456 = ORIENTED_EDGE('',*,*,#164089,.T.); +#164457 = ORIENTED_EDGE('',*,*,#164458,.T.); +#164458 = EDGE_CURVE('',#164083,#164217,#164459,.T.); +#164459 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164460,#164461), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164460 = CARTESIAN_POINT('',(0.625,0.8625,0.51)); +#164461 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164462 = ORIENTED_EDGE('',*,*,#164216,.F.); +#164463 = ORIENTED_EDGE('',*,*,#164184,.F.); +#164464 = PLANE('',#164465); +#164465 = AXIS2_PLACEMENT_3D('',#164466,#164467,#164468); +#164466 = CARTESIAN_POINT('',(0.4875,1.,0.69)); +#164467 = DIRECTION('',(-0.707106781187,-0.707106781187, + -2.180683970393E-16)); +#164468 = DIRECTION('',(0.707106781187,-0.707106781187, + 3.597884849611E-33)); +#164469 = ADVANCED_FACE('',(#164470),#164487,.F.); +#164470 = FACE_BOUND('',#164471,.F.); +#164471 = EDGE_LOOP('',(#164472,#164473,#164474,#164482)); +#164472 = ORIENTED_EDGE('',*,*,#164106,.T.); +#164473 = ORIENTED_EDGE('',*,*,#164444,.T.); +#164474 = ORIENTED_EDGE('',*,*,#164475,.F.); +#164475 = EDGE_CURVE('',#164476,#164437,#164478,.T.); +#164476 = VERTEX_POINT('',#164477); +#164477 = CARTESIAN_POINT('',(0.4875,-1.,0.69)); +#164478 = LINE('',#164479,#164480); +#164479 = CARTESIAN_POINT('',(0.4875,-1.,0.69)); +#164480 = VECTOR('',#164481,1.); +#164481 = DIRECTION('',(-1.,0.,0.)); +#164482 = ORIENTED_EDGE('',*,*,#164483,.F.); +#164483 = EDGE_CURVE('',#164107,#164476,#164484,.T.); +#164484 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164485,#164486), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164485 = CARTESIAN_POINT('',(0.4875,-1.,0.51)); +#164486 = CARTESIAN_POINT('',(0.4875,-1.,0.69)); +#164487 = PLANE('',#164488); +#164488 = AXIS2_PLACEMENT_3D('',#164489,#164490,#164491); +#164489 = CARTESIAN_POINT('',(0.4875,-1.,0.69)); +#164490 = DIRECTION('',(0.,1.,0.)); +#164491 = DIRECTION('',(-1.,0.,0.)); +#164492 = ADVANCED_FACE('',(#164493),#164504,.F.); +#164493 = FACE_BOUND('',#164494,.F.); +#164494 = EDGE_LOOP('',(#164495,#164496,#164497,#164503)); +#164495 = ORIENTED_EDGE('',*,*,#164458,.F.); +#164496 = ORIENTED_EDGE('',*,*,#164151,.T.); +#164497 = ORIENTED_EDGE('',*,*,#164498,.T.); +#164498 = EDGE_CURVE('',#164144,#164225,#164499,.T.); +#164499 = LINE('',#164500,#164501); +#164500 = CARTESIAN_POINT('',(0.625,0.1625,0.547147124163)); +#164501 = VECTOR('',#164502,1.); +#164502 = DIRECTION('',(0.,0.,1.)); +#164503 = ORIENTED_EDGE('',*,*,#164224,.F.); +#164504 = PLANE('',#164505); +#164505 = AXIS2_PLACEMENT_3D('',#164506,#164507,#164508); +#164506 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164507 = DIRECTION('',(-1.,0.,0.)); +#164508 = DIRECTION('',(0.,-1.,0.)); +#164509 = ADVANCED_FACE('',(#164510),#164535,.F.); +#164510 = FACE_BOUND('',#164511,.F.); +#164511 = EDGE_LOOP('',(#164512,#164520,#164521,#164529)); +#164512 = ORIENTED_EDGE('',*,*,#164513,.F.); +#164513 = EDGE_CURVE('',#164144,#164514,#164516,.T.); +#164514 = VERTEX_POINT('',#164515); +#164515 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.51)); +#164516 = LINE('',#164517,#164518); +#164517 = CARTESIAN_POINT('',(0.525,0.1625,0.51)); +#164518 = VECTOR('',#164519,1.); +#164519 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#164520 = ORIENTED_EDGE('',*,*,#164143,.T.); +#164521 = ORIENTED_EDGE('',*,*,#164522,.T.); +#164522 = EDGE_CURVE('',#164136,#164523,#164525,.T.); +#164523 = VERTEX_POINT('',#164524); +#164524 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.51)); +#164525 = LINE('',#164526,#164527); +#164526 = CARTESIAN_POINT('',(0.525,-0.1625,0.51)); +#164527 = VECTOR('',#164528,1.); +#164528 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#164529 = ORIENTED_EDGE('',*,*,#164530,.F.); +#164530 = EDGE_CURVE('',#164514,#164523,#164531,.T.); +#164531 = LINE('',#164532,#164533); +#164532 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.51)); +#164533 = VECTOR('',#164534,1.); +#164534 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#164535 = PLANE('',#164536); +#164536 = AXIS2_PLACEMENT_3D('',#164537,#164538,#164539); +#164537 = CARTESIAN_POINT('',(0.525,0.1625,0.51)); +#164538 = DIRECTION('',(0.,0.,1.)); +#164539 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#164540 = ADVANCED_FACE('',(#164541),#164565,.F.); +#164541 = FACE_BOUND('',#164542,.F.); +#164542 = EDGE_LOOP('',(#164543,#164551,#164552,#164559)); +#164543 = ORIENTED_EDGE('',*,*,#164544,.F.); +#164544 = EDGE_CURVE('',#164136,#164545,#164547,.T.); +#164545 = VERTEX_POINT('',#164546); +#164546 = CARTESIAN_POINT('',(0.625,-0.1625,0.69)); +#164547 = LINE('',#164548,#164549); +#164548 = CARTESIAN_POINT('',(0.625,-0.1625,0.547147124163)); +#164549 = VECTOR('',#164550,1.); +#164550 = DIRECTION('',(0.,0.,1.)); +#164551 = ORIENTED_EDGE('',*,*,#164135,.T.); +#164552 = ORIENTED_EDGE('',*,*,#164553,.T.); +#164553 = EDGE_CURVE('',#164129,#164554,#164556,.T.); +#164554 = VERTEX_POINT('',#164555); +#164555 = CARTESIAN_POINT('',(0.625,-0.8625,0.69)); +#164556 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164557,#164558), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164557 = CARTESIAN_POINT('',(0.625,-0.8625,0.51)); +#164558 = CARTESIAN_POINT('',(0.625,-0.8625,0.69)); +#164559 = ORIENTED_EDGE('',*,*,#164560,.F.); +#164560 = EDGE_CURVE('',#164545,#164554,#164561,.T.); +#164561 = LINE('',#164562,#164563); +#164562 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164563 = VECTOR('',#164564,1.); +#164564 = DIRECTION('',(0.,-1.,0.)); +#164565 = PLANE('',#164566); +#164566 = AXIS2_PLACEMENT_3D('',#164567,#164568,#164569); +#164567 = CARTESIAN_POINT('',(0.625,0.8625,0.69)); +#164568 = DIRECTION('',(-1.,0.,0.)); +#164569 = DIRECTION('',(0.,-1.,0.)); +#164570 = ADVANCED_FACE('',(#164571),#164582,.F.); +#164571 = FACE_BOUND('',#164572,.F.); +#164572 = EDGE_LOOP('',(#164573,#164574,#164575,#164581)); +#164573 = ORIENTED_EDGE('',*,*,#164168,.T.); +#164574 = ORIENTED_EDGE('',*,*,#164483,.T.); +#164575 = ORIENTED_EDGE('',*,*,#164576,.F.); +#164576 = EDGE_CURVE('',#164554,#164476,#164577,.T.); +#164577 = LINE('',#164578,#164579); +#164578 = CARTESIAN_POINT('',(0.625,-0.8625,0.69)); +#164579 = VECTOR('',#164580,1.); +#164580 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#164581 = ORIENTED_EDGE('',*,*,#164553,.F.); +#164582 = PLANE('',#164583); +#164583 = AXIS2_PLACEMENT_3D('',#164584,#164585,#164586); +#164584 = CARTESIAN_POINT('',(0.625,-0.8625,0.69)); +#164585 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164586 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#164587 = ADVANCED_FACE('',(#164588),#164627,.F.); +#164588 = FACE_BOUND('',#164589,.F.); +#164589 = EDGE_LOOP('',(#164590,#164598,#164606,#164612,#164613,#164621) + ); +#164590 = ORIENTED_EDGE('',*,*,#164591,.F.); +#164591 = EDGE_CURVE('',#164592,#164382,#164594,.T.); +#164592 = VERTEX_POINT('',#164593); +#164593 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.69)); +#164594 = LINE('',#164595,#164596); +#164595 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.69)); +#164596 = VECTOR('',#164597,1.); +#164597 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164598 = ORIENTED_EDGE('',*,*,#164599,.T.); +#164599 = EDGE_CURVE('',#164592,#164600,#164602,.T.); +#164600 = VERTEX_POINT('',#164601); +#164601 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.69)); +#164602 = LINE('',#164603,#164604); +#164603 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.69)); +#164604 = VECTOR('',#164605,1.); +#164605 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#164606 = ORIENTED_EDGE('',*,*,#164607,.T.); +#164607 = EDGE_CURVE('',#164600,#164207,#164608,.T.); +#164608 = LINE('',#164609,#164610); +#164609 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.69)); +#164610 = VECTOR('',#164611,1.); +#164611 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164612 = ORIENTED_EDGE('',*,*,#164280,.T.); +#164613 = ORIENTED_EDGE('',*,*,#164614,.F.); +#164614 = EDGE_CURVE('',#164615,#164273,#164617,.T.); +#164615 = VERTEX_POINT('',#164616); +#164616 = CARTESIAN_POINT('',(-0.575,0.4875,0.69)); +#164617 = LINE('',#164618,#164619); +#164618 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164619 = VECTOR('',#164620,1.); +#164620 = DIRECTION('',(0.,1.,0.)); +#164621 = ORIENTED_EDGE('',*,*,#164622,.F.); +#164622 = EDGE_CURVE('',#164382,#164615,#164623,.T.); +#164623 = LINE('',#164624,#164625); +#164624 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.69)); +#164625 = VECTOR('',#164626,1.); +#164626 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164627 = PLANE('',#164628); +#164628 = AXIS2_PLACEMENT_3D('',#164629,#164630,#164631); +#164629 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.69)); +#164630 = DIRECTION('',(0.,0.,-1.)); +#164631 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164632 = ADVANCED_FACE('',(#164633),#164681,.F.); +#164633 = FACE_BOUND('',#164634,.F.); +#164634 = EDGE_LOOP('',(#164635,#164645,#164653,#164659,#164660,#164661, + #164668,#164676)); +#164635 = ORIENTED_EDGE('',*,*,#164636,.T.); +#164636 = EDGE_CURVE('',#164637,#164639,#164641,.T.); +#164637 = VERTEX_POINT('',#164638); +#164638 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164639 = VERTEX_POINT('',#164640); +#164640 = CARTESIAN_POINT('',(-0.575,-0.8125,0.69)); +#164641 = LINE('',#164642,#164643); +#164642 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164643 = VECTOR('',#164644,1.); +#164644 = DIRECTION('',(0.,1.,0.)); +#164645 = ORIENTED_EDGE('',*,*,#164646,.T.); +#164646 = EDGE_CURVE('',#164639,#164647,#164649,.T.); +#164647 = VERTEX_POINT('',#164648); +#164648 = CARTESIAN_POINT('',(-0.575,-0.4875,0.69)); +#164649 = LINE('',#164650,#164651); +#164650 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164651 = VECTOR('',#164652,1.); +#164652 = DIRECTION('',(0.,1.,0.)); +#164653 = ORIENTED_EDGE('',*,*,#164654,.T.); +#164654 = EDGE_CURVE('',#164647,#164615,#164655,.T.); +#164655 = LINE('',#164656,#164657); +#164656 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164657 = VECTOR('',#164658,1.); +#164658 = DIRECTION('',(0.,1.,0.)); +#164659 = ORIENTED_EDGE('',*,*,#164614,.T.); +#164660 = ORIENTED_EDGE('',*,*,#164272,.T.); +#164661 = ORIENTED_EDGE('',*,*,#164662,.T.); +#164662 = EDGE_CURVE('',#164265,#164663,#164665,.T.); +#164663 = VERTEX_POINT('',#164664); +#164664 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#164665 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164666,#164667), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164666 = CARTESIAN_POINT('',(-0.575,0.8375,0.69)); +#164667 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#164668 = ORIENTED_EDGE('',*,*,#164669,.F.); +#164669 = EDGE_CURVE('',#164670,#164663,#164672,.T.); +#164670 = VERTEX_POINT('',#164671); +#164671 = CARTESIAN_POINT('',(-0.50270593791,-0.801352968955,1.1)); +#164672 = LINE('',#164673,#164674); +#164673 = CARTESIAN_POINT('',(-0.50270593791,-0.801352968955,1.1)); +#164674 = VECTOR('',#164675,1.); +#164675 = DIRECTION('',(0.,1.,0.)); +#164676 = ORIENTED_EDGE('',*,*,#164677,.F.); +#164677 = EDGE_CURVE('',#164637,#164670,#164678,.T.); +#164678 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164679,#164680), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164679 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164680 = CARTESIAN_POINT('',(-0.50270593791,-0.801352968955,1.1)); +#164681 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164682,#164683) + ,(#164684,#164685 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.675),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164682 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#164683 = CARTESIAN_POINT('',(-0.50270593791,-0.801352968955,1.1)); +#164684 = CARTESIAN_POINT('',(-0.575,0.8375,0.69)); +#164685 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#164686 = ADVANCED_FACE('',(#164687),#164704,.F.); +#164687 = FACE_BOUND('',#164688,.F.); +#164688 = EDGE_LOOP('',(#164689,#164690,#164697,#164703)); +#164689 = ORIENTED_EDGE('',*,*,#164264,.T.); +#164690 = ORIENTED_EDGE('',*,*,#164691,.T.); +#164691 = EDGE_CURVE('',#164257,#164692,#164694,.T.); +#164692 = VERTEX_POINT('',#164693); +#164693 = CARTESIAN_POINT('',(-0.426352968955,0.87770593791,1.1)); +#164694 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164695,#164696), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164695 = CARTESIAN_POINT('',(-0.4625,0.95,0.69)); +#164696 = CARTESIAN_POINT('',(-0.426352968955,0.87770593791,1.1)); +#164697 = ORIENTED_EDGE('',*,*,#164698,.F.); +#164698 = EDGE_CURVE('',#164663,#164692,#164699,.T.); +#164699 = LINE('',#164700,#164701); +#164700 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#164701 = VECTOR('',#164702,1.); +#164702 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#164703 = ORIENTED_EDGE('',*,*,#164662,.F.); +#164704 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164705,#164706) + ,(#164707,#164708 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.159099025767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#164705 = CARTESIAN_POINT('',(-0.575,0.8375,0.69)); +#164706 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#164707 = CARTESIAN_POINT('',(-0.4625,0.95,0.69)); +#164708 = CARTESIAN_POINT('',(-0.426352968955,0.87770593791,1.1)); +#164709 = ADVANCED_FACE('',(#164710),#164727,.F.); +#164710 = FACE_BOUND('',#164711,.F.); +#164711 = EDGE_LOOP('',(#164712,#164713,#164720,#164726)); +#164712 = ORIENTED_EDGE('',*,*,#164256,.T.); +#164713 = ORIENTED_EDGE('',*,*,#164714,.T.); +#164714 = EDGE_CURVE('',#164249,#164715,#164717,.T.); +#164715 = VERTEX_POINT('',#164716); +#164716 = CARTESIAN_POINT('',(0.426352968955,0.87770593791,1.1)); +#164717 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164718,#164719), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164718 = CARTESIAN_POINT('',(0.4625,0.95,0.69)); +#164719 = CARTESIAN_POINT('',(0.426352968955,0.87770593791,1.1)); +#164720 = ORIENTED_EDGE('',*,*,#164721,.F.); +#164721 = EDGE_CURVE('',#164692,#164715,#164722,.T.); +#164722 = LINE('',#164723,#164724); +#164723 = CARTESIAN_POINT('',(-0.426352968955,0.87770593791,1.1)); +#164724 = VECTOR('',#164725,1.); +#164725 = DIRECTION('',(1.,0.,0.)); +#164726 = ORIENTED_EDGE('',*,*,#164691,.F.); +#164727 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164728,#164729) + ,(#164730,#164731 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.925),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164728 = CARTESIAN_POINT('',(-0.4625,0.95,0.69)); +#164729 = CARTESIAN_POINT('',(-0.426352968955,0.87770593791,1.1)); +#164730 = CARTESIAN_POINT('',(0.4625,0.95,0.69)); +#164731 = CARTESIAN_POINT('',(0.426352968955,0.87770593791,1.1)); +#164732 = ADVANCED_FACE('',(#164733),#164750,.F.); +#164733 = FACE_BOUND('',#164734,.F.); +#164734 = EDGE_LOOP('',(#164735,#164736,#164743,#164749)); +#164735 = ORIENTED_EDGE('',*,*,#164248,.T.); +#164736 = ORIENTED_EDGE('',*,*,#164737,.T.); +#164737 = EDGE_CURVE('',#164241,#164738,#164740,.T.); +#164738 = VERTEX_POINT('',#164739); +#164739 = CARTESIAN_POINT('',(0.50270593791,0.801352968955,1.1)); +#164740 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164741,#164742), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164741 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164742 = CARTESIAN_POINT('',(0.50270593791,0.801352968955,1.1)); +#164743 = ORIENTED_EDGE('',*,*,#164744,.F.); +#164744 = EDGE_CURVE('',#164715,#164738,#164745,.T.); +#164745 = LINE('',#164746,#164747); +#164746 = CARTESIAN_POINT('',(0.426352968955,0.87770593791,1.1)); +#164747 = VECTOR('',#164748,1.); +#164748 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#164749 = ORIENTED_EDGE('',*,*,#164714,.F.); +#164750 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164751,#164752) + ,(#164753,#164754 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.159099025767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#164751 = CARTESIAN_POINT('',(0.4625,0.95,0.69)); +#164752 = CARTESIAN_POINT('',(0.426352968955,0.87770593791,1.1)); +#164753 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164754 = CARTESIAN_POINT('',(0.50270593791,0.801352968955,1.1)); +#164755 = ADVANCED_FACE('',(#164756),#164789,.F.); +#164756 = FACE_BOUND('',#164757,.F.); +#164757 = EDGE_LOOP('',(#164758,#164759,#164767,#164775,#164782,#164788) + ); +#164758 = ORIENTED_EDGE('',*,*,#164240,.T.); +#164759 = ORIENTED_EDGE('',*,*,#164760,.T.); +#164760 = EDGE_CURVE('',#164233,#164761,#164763,.T.); +#164761 = VERTEX_POINT('',#164762); +#164762 = CARTESIAN_POINT('',(0.575,-0.1625,0.69)); +#164763 = LINE('',#164764,#164765); +#164764 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164765 = VECTOR('',#164766,1.); +#164766 = DIRECTION('',(0.,-1.,0.)); +#164767 = ORIENTED_EDGE('',*,*,#164768,.T.); +#164768 = EDGE_CURVE('',#164761,#164769,#164771,.T.); +#164769 = VERTEX_POINT('',#164770); +#164770 = CARTESIAN_POINT('',(0.575,-0.8375,0.69)); +#164771 = LINE('',#164772,#164773); +#164772 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164773 = VECTOR('',#164774,1.); +#164774 = DIRECTION('',(0.,-1.,0.)); +#164775 = ORIENTED_EDGE('',*,*,#164776,.T.); +#164776 = EDGE_CURVE('',#164769,#164777,#164779,.T.); +#164777 = VERTEX_POINT('',#164778); +#164778 = CARTESIAN_POINT('',(0.50270593791,-0.801352968955,1.1)); +#164779 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#164780,#164781), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#164780 = CARTESIAN_POINT('',(0.575,-0.8375,0.69)); +#164781 = CARTESIAN_POINT('',(0.50270593791,-0.801352968955,1.1)); +#164782 = ORIENTED_EDGE('',*,*,#164783,.F.); +#164783 = EDGE_CURVE('',#164738,#164777,#164784,.T.); +#164784 = LINE('',#164785,#164786); +#164785 = CARTESIAN_POINT('',(0.50270593791,0.801352968955,1.1)); +#164786 = VECTOR('',#164787,1.); +#164787 = DIRECTION('',(0.,-1.,0.)); +#164788 = ORIENTED_EDGE('',*,*,#164737,.F.); +#164789 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#164790,#164791) + ,(#164792,#164793 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.675),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#164790 = CARTESIAN_POINT('',(0.575,0.8375,0.69)); +#164791 = CARTESIAN_POINT('',(0.50270593791,0.801352968955,1.1)); +#164792 = CARTESIAN_POINT('',(0.575,-0.8375,0.69)); +#164793 = CARTESIAN_POINT('',(0.50270593791,-0.801352968955,1.1)); +#164794 = ADVANCED_FACE('',(#164795),#164827,.F.); +#164795 = FACE_BOUND('',#164796,.F.); +#164796 = EDGE_LOOP('',(#164797,#164805,#164813,#164819,#164825,#164826) + ); +#164797 = ORIENTED_EDGE('',*,*,#164798,.F.); +#164798 = EDGE_CURVE('',#164799,#164225,#164801,.T.); +#164799 = VERTEX_POINT('',#164800); +#164800 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.69)); +#164801 = LINE('',#164802,#164803); +#164802 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.69)); +#164803 = VECTOR('',#164804,1.); +#164804 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#164805 = ORIENTED_EDGE('',*,*,#164806,.T.); +#164806 = EDGE_CURVE('',#164799,#164807,#164809,.T.); +#164807 = VERTEX_POINT('',#164808); +#164808 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.69)); +#164809 = LINE('',#164810,#164811); +#164810 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.69)); +#164811 = VECTOR('',#164812,1.); +#164812 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#164813 = ORIENTED_EDGE('',*,*,#164814,.T.); +#164814 = EDGE_CURVE('',#164807,#164545,#164815,.T.); +#164815 = LINE('',#164816,#164817); +#164816 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.69)); +#164817 = VECTOR('',#164818,1.); +#164818 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#164819 = ORIENTED_EDGE('',*,*,#164820,.T.); +#164820 = EDGE_CURVE('',#164545,#164761,#164821,.T.); +#164821 = LINE('',#164822,#164823); +#164822 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.69)); +#164823 = VECTOR('',#164824,1.); +#164824 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#164825 = ORIENTED_EDGE('',*,*,#164760,.F.); +#164826 = ORIENTED_EDGE('',*,*,#164232,.F.); +#164827 = PLANE('',#164828); +#164828 = AXIS2_PLACEMENT_3D('',#164829,#164830,#164831); +#164829 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.69)); +#164830 = DIRECTION('',(0.,0.,-1.)); +#164831 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#164832 = ADVANCED_FACE('',(#164833),#164912,.T.); +#164833 = FACE_BOUND('',#164834,.T.); +#164834 = EDGE_LOOP('',(#164835,#164836,#164837,#164846,#164854,#164863, + #164871,#164879,#164887,#164896,#164904,#164911)); +#164835 = ORIENTED_EDGE('',*,*,#164294,.F.); +#164836 = ORIENTED_EDGE('',*,*,#164412,.T.); +#164837 = ORIENTED_EDGE('',*,*,#164838,.T.); +#164838 = EDGE_CURVE('',#164413,#164839,#164841,.T.); +#164839 = VERTEX_POINT('',#164840); +#164840 = CARTESIAN_POINT('',(-0.79518671351,0.8125,0.501736481777)); +#164841 = CIRCLE('',#164842,1.E-02); +#164842 = AXIS2_PLACEMENT_3D('',#164843,#164844,#164845); +#164843 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.5)); +#164844 = DIRECTION('',(-1.110223024625E-16,-1.,3.284293273311E-47)); +#164845 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#164846 = ORIENTED_EDGE('',*,*,#164847,.T.); +#164847 = EDGE_CURVE('',#164839,#164848,#164850,.T.); +#164848 = VERTEX_POINT('',#164849); +#164849 = CARTESIAN_POINT('',(-0.852886526928,0.8125,0.157006846243)); +#164850 = LINE('',#164851,#164852); +#164851 = CARTESIAN_POINT('',(-0.79518671351,0.8125,0.501736481777)); +#164852 = VECTOR('',#164853,1.); +#164853 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#164854 = ORIENTED_EDGE('',*,*,#164855,.T.); +#164855 = EDGE_CURVE('',#164848,#164856,#164858,.T.); +#164856 = VERTEX_POINT('',#164857); +#164857 = CARTESIAN_POINT('',(-1.04,0.8125,-2.775557561563E-17)); +#164858 = CIRCLE('',#164859,0.19); +#164859 = AXIS2_PLACEMENT_3D('',#164860,#164861,#164862); +#164860 = CARTESIAN_POINT('',(-1.04,0.8125,0.19)); +#164861 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#164862 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#164863 = ORIENTED_EDGE('',*,*,#164864,.T.); +#164864 = EDGE_CURVE('',#164856,#164865,#164867,.T.); +#164865 = VERTEX_POINT('',#164866); +#164866 = CARTESIAN_POINT('',(-1.05,0.8125,-2.775557561563E-17)); +#164867 = LINE('',#164868,#164869); +#164868 = CARTESIAN_POINT('',(-1.04,0.8125,-2.775557561563E-17)); +#164869 = VECTOR('',#164870,1.); +#164870 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#164871 = ORIENTED_EDGE('',*,*,#164872,.T.); +#164872 = EDGE_CURVE('',#164865,#164873,#164875,.T.); +#164873 = VERTEX_POINT('',#164874); +#164874 = CARTESIAN_POINT('',(-1.05,0.8125,0.18)); +#164875 = LINE('',#164876,#164877); +#164876 = CARTESIAN_POINT('',(-1.05,0.8125,-2.775557561563E-17)); +#164877 = VECTOR('',#164878,1.); +#164878 = DIRECTION('',(0.,0.,1.)); +#164879 = ORIENTED_EDGE('',*,*,#164880,.T.); +#164880 = EDGE_CURVE('',#164873,#164881,#164883,.T.); +#164881 = VERTEX_POINT('',#164882); +#164882 = CARTESIAN_POINT('',(-1.04,0.8125,0.18)); +#164883 = LINE('',#164884,#164885); +#164884 = CARTESIAN_POINT('',(-1.05,0.8125,0.18)); +#164885 = VECTOR('',#164886,1.); +#164886 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164887 = ORIENTED_EDGE('',*,*,#164888,.T.); +#164888 = EDGE_CURVE('',#164881,#164889,#164891,.T.); +#164889 = VERTEX_POINT('',#164890); +#164890 = CARTESIAN_POINT('',(-1.03015192247,0.8125,0.188263518223)); +#164891 = CIRCLE('',#164892,1.E-02); +#164892 = AXIS2_PLACEMENT_3D('',#164893,#164894,#164895); +#164893 = CARTESIAN_POINT('',(-1.04,0.8125,0.19)); +#164894 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#164895 = DIRECTION('',(0.,0.,-1.)); +#164896 = ORIENTED_EDGE('',*,*,#164897,.T.); +#164897 = EDGE_CURVE('',#164889,#164898,#164900,.T.); +#164898 = VERTEX_POINT('',#164899); +#164899 = CARTESIAN_POINT('',(-0.972452109053,0.8125,0.532993153757)); +#164900 = LINE('',#164901,#164902); +#164901 = CARTESIAN_POINT('',(-1.03015192247,0.8125,0.188263518223)); +#164902 = VECTOR('',#164903,1.); +#164903 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#164904 = ORIENTED_EDGE('',*,*,#164905,.T.); +#164905 = EDGE_CURVE('',#164898,#164600,#164906,.T.); +#164906 = CIRCLE('',#164907,0.19); +#164907 = AXIS2_PLACEMENT_3D('',#164908,#164909,#164910); +#164908 = CARTESIAN_POINT('',(-0.78533863598,0.8125,0.5)); +#164909 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#164910 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#164911 = ORIENTED_EDGE('',*,*,#164607,.T.); +#164912 = PLANE('',#164913); +#164913 = AXIS2_PLACEMENT_3D('',#164914,#164915,#164916); +#164914 = CARTESIAN_POINT('',(-0.830703739422,0.8125,0.404294248326)); +#164915 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#164916 = DIRECTION('',(0.,-0.,1.)); +#164917 = ADVANCED_FACE('',(#164918),#164956,.F.); +#164918 = FACE_BOUND('',#164919,.F.); +#164919 = EDGE_LOOP('',(#164920,#164921,#164927,#164928,#164936,#164944, + #164950,#164951,#164952,#164953,#164954,#164955)); +#164920 = ORIENTED_EDGE('',*,*,#164327,.T.); +#164921 = ORIENTED_EDGE('',*,*,#164922,.T.); +#164922 = EDGE_CURVE('',#164320,#164639,#164923,.T.); +#164923 = LINE('',#164924,#164925); +#164924 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.69)); +#164925 = VECTOR('',#164926,1.); +#164926 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#164927 = ORIENTED_EDGE('',*,*,#164636,.F.); +#164928 = ORIENTED_EDGE('',*,*,#164929,.F.); +#164929 = EDGE_CURVE('',#164930,#164637,#164932,.T.); +#164930 = VERTEX_POINT('',#164931); +#164931 = CARTESIAN_POINT('',(-0.4625,-0.95,0.69)); +#164932 = LINE('',#164933,#164934); +#164933 = CARTESIAN_POINT('',(-0.4625,-0.95,0.69)); +#164934 = VECTOR('',#164935,1.); +#164935 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#164936 = ORIENTED_EDGE('',*,*,#164937,.F.); +#164937 = EDGE_CURVE('',#164938,#164930,#164940,.T.); +#164938 = VERTEX_POINT('',#164939); +#164939 = CARTESIAN_POINT('',(0.4625,-0.95,0.69)); +#164940 = LINE('',#164941,#164942); +#164941 = CARTESIAN_POINT('',(0.4625,-0.95,0.69)); +#164942 = VECTOR('',#164943,1.); +#164943 = DIRECTION('',(-1.,0.,0.)); +#164944 = ORIENTED_EDGE('',*,*,#164945,.F.); +#164945 = EDGE_CURVE('',#164769,#164938,#164946,.T.); +#164946 = LINE('',#164947,#164948); +#164947 = CARTESIAN_POINT('',(0.575,-0.8375,0.69)); +#164948 = VECTOR('',#164949,1.); +#164949 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#164950 = ORIENTED_EDGE('',*,*,#164768,.F.); +#164951 = ORIENTED_EDGE('',*,*,#164820,.F.); +#164952 = ORIENTED_EDGE('',*,*,#164560,.T.); +#164953 = ORIENTED_EDGE('',*,*,#164576,.T.); +#164954 = ORIENTED_EDGE('',*,*,#164475,.T.); +#164955 = ORIENTED_EDGE('',*,*,#164436,.T.); +#164956 = PLANE('',#164957); +#164957 = AXIS2_PLACEMENT_3D('',#164958,#164959,#164960); +#164958 = CARTESIAN_POINT('',(-0.5375,0.9125,0.69)); +#164959 = DIRECTION('',(1.727070457764E-15,-1.698411050721E-15,-1.)); +#164960 = DIRECTION('',(0.707106781187,0.707106781187,2.026526106489E-17 + )); +#164961 = ADVANCED_FACE('',(#164962),#165048,.F.); +#164962 = FACE_BOUND('',#164963,.F.); +#164963 = EDGE_LOOP('',(#164964,#164965,#164966,#164975,#164983,#164992, + #165000,#165008,#165016,#165025,#165033,#165042)); +#164964 = ORIENTED_EDGE('',*,*,#164319,.F.); +#164965 = ORIENTED_EDGE('',*,*,#164341,.T.); +#164966 = ORIENTED_EDGE('',*,*,#164967,.T.); +#164967 = EDGE_CURVE('',#164342,#164968,#164970,.T.); +#164968 = VERTEX_POINT('',#164969); +#164969 = CARTESIAN_POINT('',(-0.79518671351,-0.8125,0.501736481777)); +#164970 = CIRCLE('',#164971,1.E-02); +#164971 = AXIS2_PLACEMENT_3D('',#164972,#164973,#164974); +#164972 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.5)); +#164973 = DIRECTION('',(-1.110223024625E-16,-1.,3.284293273311E-47)); +#164974 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#164975 = ORIENTED_EDGE('',*,*,#164976,.T.); +#164976 = EDGE_CURVE('',#164968,#164977,#164979,.T.); +#164977 = VERTEX_POINT('',#164978); +#164978 = CARTESIAN_POINT('',(-0.852886526928,-0.8125,0.157006846243)); +#164979 = LINE('',#164980,#164981); +#164980 = CARTESIAN_POINT('',(-0.79518671351,-0.8125,0.501736481777)); +#164981 = VECTOR('',#164982,1.); +#164982 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#164983 = ORIENTED_EDGE('',*,*,#164984,.T.); +#164984 = EDGE_CURVE('',#164977,#164985,#164987,.T.); +#164985 = VERTEX_POINT('',#164986); +#164986 = CARTESIAN_POINT('',(-1.04,-0.8125,-2.775557561563E-17)); +#164987 = CIRCLE('',#164988,0.19); +#164988 = AXIS2_PLACEMENT_3D('',#164989,#164990,#164991); +#164989 = CARTESIAN_POINT('',(-1.04,-0.8125,0.19)); +#164990 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#164991 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#164992 = ORIENTED_EDGE('',*,*,#164993,.T.); +#164993 = EDGE_CURVE('',#164985,#164994,#164996,.T.); +#164994 = VERTEX_POINT('',#164995); +#164995 = CARTESIAN_POINT('',(-1.05,-0.8125,-2.775557561563E-17)); +#164996 = LINE('',#164997,#164998); +#164997 = CARTESIAN_POINT('',(-1.04,-0.8125,-2.775557561563E-17)); +#164998 = VECTOR('',#164999,1.); +#164999 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#165000 = ORIENTED_EDGE('',*,*,#165001,.T.); +#165001 = EDGE_CURVE('',#164994,#165002,#165004,.T.); +#165002 = VERTEX_POINT('',#165003); +#165003 = CARTESIAN_POINT('',(-1.05,-0.8125,0.18)); +#165004 = LINE('',#165005,#165006); +#165005 = CARTESIAN_POINT('',(-1.05,-0.8125,-2.775557561563E-17)); +#165006 = VECTOR('',#165007,1.); +#165007 = DIRECTION('',(0.,0.,1.)); +#165008 = ORIENTED_EDGE('',*,*,#165009,.T.); +#165009 = EDGE_CURVE('',#165002,#165010,#165012,.T.); +#165010 = VERTEX_POINT('',#165011); +#165011 = CARTESIAN_POINT('',(-1.04,-0.8125,0.18)); +#165012 = LINE('',#165013,#165014); +#165013 = CARTESIAN_POINT('',(-1.05,-0.8125,0.18)); +#165014 = VECTOR('',#165015,1.); +#165015 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165016 = ORIENTED_EDGE('',*,*,#165017,.T.); +#165017 = EDGE_CURVE('',#165010,#165018,#165020,.T.); +#165018 = VERTEX_POINT('',#165019); +#165019 = CARTESIAN_POINT('',(-1.03015192247,-0.8125,0.188263518223)); +#165020 = CIRCLE('',#165021,1.E-02); +#165021 = AXIS2_PLACEMENT_3D('',#165022,#165023,#165024); +#165022 = CARTESIAN_POINT('',(-1.04,-0.8125,0.19)); +#165023 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165024 = DIRECTION('',(0.,0.,-1.)); +#165025 = ORIENTED_EDGE('',*,*,#165026,.T.); +#165026 = EDGE_CURVE('',#165018,#165027,#165029,.T.); +#165027 = VERTEX_POINT('',#165028); +#165028 = CARTESIAN_POINT('',(-0.972452109053,-0.8125,0.532993153757)); +#165029 = LINE('',#165030,#165031); +#165030 = CARTESIAN_POINT('',(-1.03015192247,-0.8125,0.188263518223)); +#165031 = VECTOR('',#165032,1.); +#165032 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#165033 = ORIENTED_EDGE('',*,*,#165034,.T.); +#165034 = EDGE_CURVE('',#165027,#165035,#165037,.T.); +#165035 = VERTEX_POINT('',#165036); +#165036 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.69)); +#165037 = CIRCLE('',#165038,0.19); +#165038 = AXIS2_PLACEMENT_3D('',#165039,#165040,#165041); +#165039 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.5)); +#165040 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#165041 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#165042 = ORIENTED_EDGE('',*,*,#165043,.T.); +#165043 = EDGE_CURVE('',#165035,#164320,#165044,.T.); +#165044 = LINE('',#165045,#165046); +#165045 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.69)); +#165046 = VECTOR('',#165047,1.); +#165047 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165048 = PLANE('',#165049); +#165049 = AXIS2_PLACEMENT_3D('',#165050,#165051,#165052); +#165050 = CARTESIAN_POINT('',(-0.830703739422,-0.8125,0.404294248326)); +#165051 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165052 = DIRECTION('',(0.,-0.,1.)); +#165053 = ADVANCED_FACE('',(#165054),#165073,.F.); +#165054 = FACE_BOUND('',#165055,.F.); +#165055 = EDGE_LOOP('',(#165056,#165057,#165066,#165072)); +#165056 = ORIENTED_EDGE('',*,*,#164358,.T.); +#165057 = ORIENTED_EDGE('',*,*,#165058,.T.); +#165058 = EDGE_CURVE('',#164351,#165059,#165061,.T.); +#165059 = VERTEX_POINT('',#165060); +#165060 = CARTESIAN_POINT('',(-0.79518671351,-0.4875,0.501736481777)); +#165061 = CIRCLE('',#165062,1.E-02); +#165062 = AXIS2_PLACEMENT_3D('',#165063,#165064,#165065); +#165063 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.5)); +#165064 = DIRECTION('',(-1.110223024625E-16,-1.,3.284293273311E-47)); +#165065 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#165066 = ORIENTED_EDGE('',*,*,#165067,.F.); +#165067 = EDGE_CURVE('',#164968,#165059,#165068,.T.); +#165068 = LINE('',#165069,#165070); +#165069 = CARTESIAN_POINT('',(-0.79518671351,-0.8125,0.501736481777)); +#165070 = VECTOR('',#165071,1.); +#165071 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165072 = ORIENTED_EDGE('',*,*,#164967,.F.); +#165073 = CYLINDRICAL_SURFACE('',#165074,1.E-02); +#165074 = AXIS2_PLACEMENT_3D('',#165075,#165076,#165077); +#165075 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.5)); +#165076 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#165077 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#165078 = ADVANCED_FACE('',(#165079),#165157,.T.); +#165079 = FACE_BOUND('',#165080,.T.); +#165080 = EDGE_LOOP('',(#165081,#165082,#165083,#165084,#165092,#165101, + #165109,#165117,#165125,#165134,#165142,#165151)); +#165081 = ORIENTED_EDGE('',*,*,#164372,.F.); +#165082 = ORIENTED_EDGE('',*,*,#164350,.T.); +#165083 = ORIENTED_EDGE('',*,*,#165058,.T.); +#165084 = ORIENTED_EDGE('',*,*,#165085,.T.); +#165085 = EDGE_CURVE('',#165059,#165086,#165088,.T.); +#165086 = VERTEX_POINT('',#165087); +#165087 = CARTESIAN_POINT('',(-0.852886526928,-0.4875,0.157006846243)); +#165088 = LINE('',#165089,#165090); +#165089 = CARTESIAN_POINT('',(-0.79518671351,-0.4875,0.501736481777)); +#165090 = VECTOR('',#165091,1.); +#165091 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#165092 = ORIENTED_EDGE('',*,*,#165093,.T.); +#165093 = EDGE_CURVE('',#165086,#165094,#165096,.T.); +#165094 = VERTEX_POINT('',#165095); +#165095 = CARTESIAN_POINT('',(-1.04,-0.4875,-2.775557561563E-17)); +#165096 = CIRCLE('',#165097,0.19); +#165097 = AXIS2_PLACEMENT_3D('',#165098,#165099,#165100); +#165098 = CARTESIAN_POINT('',(-1.04,-0.4875,0.19)); +#165099 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#165100 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165101 = ORIENTED_EDGE('',*,*,#165102,.T.); +#165102 = EDGE_CURVE('',#165094,#165103,#165105,.T.); +#165103 = VERTEX_POINT('',#165104); +#165104 = CARTESIAN_POINT('',(-1.05,-0.4875,-2.775557561563E-17)); +#165105 = LINE('',#165106,#165107); +#165106 = CARTESIAN_POINT('',(-1.04,-0.4875,-2.775557561563E-17)); +#165107 = VECTOR('',#165108,1.); +#165108 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#165109 = ORIENTED_EDGE('',*,*,#165110,.T.); +#165110 = EDGE_CURVE('',#165103,#165111,#165113,.T.); +#165111 = VERTEX_POINT('',#165112); +#165112 = CARTESIAN_POINT('',(-1.05,-0.4875,0.18)); +#165113 = LINE('',#165114,#165115); +#165114 = CARTESIAN_POINT('',(-1.05,-0.4875,-2.775557561563E-17)); +#165115 = VECTOR('',#165116,1.); +#165116 = DIRECTION('',(0.,0.,1.)); +#165117 = ORIENTED_EDGE('',*,*,#165118,.T.); +#165118 = EDGE_CURVE('',#165111,#165119,#165121,.T.); +#165119 = VERTEX_POINT('',#165120); +#165120 = CARTESIAN_POINT('',(-1.04,-0.4875,0.18)); +#165121 = LINE('',#165122,#165123); +#165122 = CARTESIAN_POINT('',(-1.05,-0.4875,0.18)); +#165123 = VECTOR('',#165124,1.); +#165124 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165125 = ORIENTED_EDGE('',*,*,#165126,.T.); +#165126 = EDGE_CURVE('',#165119,#165127,#165129,.T.); +#165127 = VERTEX_POINT('',#165128); +#165128 = CARTESIAN_POINT('',(-1.03015192247,-0.4875,0.188263518223)); +#165129 = CIRCLE('',#165130,1.E-02); +#165130 = AXIS2_PLACEMENT_3D('',#165131,#165132,#165133); +#165131 = CARTESIAN_POINT('',(-1.04,-0.4875,0.19)); +#165132 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165133 = DIRECTION('',(0.,0.,-1.)); +#165134 = ORIENTED_EDGE('',*,*,#165135,.T.); +#165135 = EDGE_CURVE('',#165127,#165136,#165138,.T.); +#165136 = VERTEX_POINT('',#165137); +#165137 = CARTESIAN_POINT('',(-0.972452109053,-0.4875,0.532993153757)); +#165138 = LINE('',#165139,#165140); +#165139 = CARTESIAN_POINT('',(-1.03015192247,-0.4875,0.188263518223)); +#165140 = VECTOR('',#165141,1.); +#165141 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#165142 = ORIENTED_EDGE('',*,*,#165143,.T.); +#165143 = EDGE_CURVE('',#165136,#165144,#165146,.T.); +#165144 = VERTEX_POINT('',#165145); +#165145 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.69)); +#165146 = CIRCLE('',#165147,0.19); +#165147 = AXIS2_PLACEMENT_3D('',#165148,#165149,#165150); +#165148 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.5)); +#165149 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#165150 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#165151 = ORIENTED_EDGE('',*,*,#165152,.T.); +#165152 = EDGE_CURVE('',#165144,#164373,#165153,.T.); +#165153 = LINE('',#165154,#165155); +#165154 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.69)); +#165155 = VECTOR('',#165156,1.); +#165156 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165157 = PLANE('',#165158); +#165158 = AXIS2_PLACEMENT_3D('',#165159,#165160,#165161); +#165159 = CARTESIAN_POINT('',(-0.830703739422,-0.4875,0.404294248326)); +#165160 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165161 = DIRECTION('',(0.,-0.,1.)); +#165162 = ADVANCED_FACE('',(#165163),#165174,.F.); +#165163 = FACE_BOUND('',#165164,.F.); +#165164 = EDGE_LOOP('',(#165165,#165166,#165167,#165168)); +#165165 = ORIENTED_EDGE('',*,*,#164389,.T.); +#165166 = ORIENTED_EDGE('',*,*,#164622,.T.); +#165167 = ORIENTED_EDGE('',*,*,#164654,.F.); +#165168 = ORIENTED_EDGE('',*,*,#165169,.F.); +#165169 = EDGE_CURVE('',#164373,#164647,#165170,.T.); +#165170 = LINE('',#165171,#165172); +#165171 = CARTESIAN_POINT('',(-0.78533863598,-0.4875,0.69)); +#165172 = VECTOR('',#165173,1.); +#165173 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165174 = PLANE('',#165175); +#165175 = AXIS2_PLACEMENT_3D('',#165176,#165177,#165178); +#165176 = CARTESIAN_POINT('',(-0.5375,0.9125,0.69)); +#165177 = DIRECTION('',(1.727070457764E-15,-1.698411050721E-15,-1.)); +#165178 = DIRECTION('',(0.707106781187,0.707106781187,2.026526106489E-17 + )); +#165179 = ADVANCED_FACE('',(#165180),#165259,.F.); +#165180 = FACE_BOUND('',#165181,.F.); +#165181 = EDGE_LOOP('',(#165182,#165183,#165184,#165193,#165201,#165210, + #165218,#165226,#165234,#165243,#165251,#165258)); +#165182 = ORIENTED_EDGE('',*,*,#164381,.F.); +#165183 = ORIENTED_EDGE('',*,*,#164403,.T.); +#165184 = ORIENTED_EDGE('',*,*,#165185,.T.); +#165185 = EDGE_CURVE('',#164404,#165186,#165188,.T.); +#165186 = VERTEX_POINT('',#165187); +#165187 = CARTESIAN_POINT('',(-0.79518671351,0.4875,0.501736481777)); +#165188 = CIRCLE('',#165189,1.E-02); +#165189 = AXIS2_PLACEMENT_3D('',#165190,#165191,#165192); +#165190 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.5)); +#165191 = DIRECTION('',(-1.110223024625E-16,-1.,3.284293273311E-47)); +#165192 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#165193 = ORIENTED_EDGE('',*,*,#165194,.T.); +#165194 = EDGE_CURVE('',#165186,#165195,#165197,.T.); +#165195 = VERTEX_POINT('',#165196); +#165196 = CARTESIAN_POINT('',(-0.852886526928,0.4875,0.157006846243)); +#165197 = LINE('',#165198,#165199); +#165198 = CARTESIAN_POINT('',(-0.79518671351,0.4875,0.501736481777)); +#165199 = VECTOR('',#165200,1.); +#165200 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#165201 = ORIENTED_EDGE('',*,*,#165202,.T.); +#165202 = EDGE_CURVE('',#165195,#165203,#165205,.T.); +#165203 = VERTEX_POINT('',#165204); +#165204 = CARTESIAN_POINT('',(-1.04,0.4875,-2.775557561563E-17)); +#165205 = CIRCLE('',#165206,0.19); +#165206 = AXIS2_PLACEMENT_3D('',#165207,#165208,#165209); +#165207 = CARTESIAN_POINT('',(-1.04,0.4875,0.19)); +#165208 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#165209 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165210 = ORIENTED_EDGE('',*,*,#165211,.T.); +#165211 = EDGE_CURVE('',#165203,#165212,#165214,.T.); +#165212 = VERTEX_POINT('',#165213); +#165213 = CARTESIAN_POINT('',(-1.05,0.4875,-2.775557561563E-17)); +#165214 = LINE('',#165215,#165216); +#165215 = CARTESIAN_POINT('',(-1.04,0.4875,-2.775557561563E-17)); +#165216 = VECTOR('',#165217,1.); +#165217 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#165218 = ORIENTED_EDGE('',*,*,#165219,.T.); +#165219 = EDGE_CURVE('',#165212,#165220,#165222,.T.); +#165220 = VERTEX_POINT('',#165221); +#165221 = CARTESIAN_POINT('',(-1.05,0.4875,0.18)); +#165222 = LINE('',#165223,#165224); +#165223 = CARTESIAN_POINT('',(-1.05,0.4875,-2.775557561563E-17)); +#165224 = VECTOR('',#165225,1.); +#165225 = DIRECTION('',(0.,0.,1.)); +#165226 = ORIENTED_EDGE('',*,*,#165227,.T.); +#165227 = EDGE_CURVE('',#165220,#165228,#165230,.T.); +#165228 = VERTEX_POINT('',#165229); +#165229 = CARTESIAN_POINT('',(-1.04,0.4875,0.18)); +#165230 = LINE('',#165231,#165232); +#165231 = CARTESIAN_POINT('',(-1.05,0.4875,0.18)); +#165232 = VECTOR('',#165233,1.); +#165233 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165234 = ORIENTED_EDGE('',*,*,#165235,.T.); +#165235 = EDGE_CURVE('',#165228,#165236,#165238,.T.); +#165236 = VERTEX_POINT('',#165237); +#165237 = CARTESIAN_POINT('',(-1.03015192247,0.4875,0.188263518223)); +#165238 = CIRCLE('',#165239,1.E-02); +#165239 = AXIS2_PLACEMENT_3D('',#165240,#165241,#165242); +#165240 = CARTESIAN_POINT('',(-1.04,0.4875,0.19)); +#165241 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165242 = DIRECTION('',(0.,0.,-1.)); +#165243 = ORIENTED_EDGE('',*,*,#165244,.T.); +#165244 = EDGE_CURVE('',#165236,#165245,#165247,.T.); +#165245 = VERTEX_POINT('',#165246); +#165246 = CARTESIAN_POINT('',(-0.972452109053,0.4875,0.532993153757)); +#165247 = LINE('',#165248,#165249); +#165248 = CARTESIAN_POINT('',(-1.03015192247,0.4875,0.188263518223)); +#165249 = VECTOR('',#165250,1.); +#165250 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#165251 = ORIENTED_EDGE('',*,*,#165252,.T.); +#165252 = EDGE_CURVE('',#165245,#164592,#165253,.T.); +#165253 = CIRCLE('',#165254,0.19); +#165254 = AXIS2_PLACEMENT_3D('',#165255,#165256,#165257); +#165255 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.5)); +#165256 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#165257 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#165258 = ORIENTED_EDGE('',*,*,#164591,.T.); +#165259 = PLANE('',#165260); +#165260 = AXIS2_PLACEMENT_3D('',#165261,#165262,#165263); +#165261 = CARTESIAN_POINT('',(-0.830703739422,0.4875,0.404294248326)); +#165262 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165263 = DIRECTION('',(0.,-0.,1.)); +#165264 = ADVANCED_FACE('',(#165265),#165276,.F.); +#165265 = FACE_BOUND('',#165266,.F.); +#165266 = EDGE_LOOP('',(#165267,#165268,#165269,#165275)); +#165267 = ORIENTED_EDGE('',*,*,#164420,.T.); +#165268 = ORIENTED_EDGE('',*,*,#164838,.T.); +#165269 = ORIENTED_EDGE('',*,*,#165270,.F.); +#165270 = EDGE_CURVE('',#165186,#164839,#165271,.T.); +#165271 = LINE('',#165272,#165273); +#165272 = CARTESIAN_POINT('',(-0.79518671351,0.4875,0.501736481777)); +#165273 = VECTOR('',#165274,1.); +#165274 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165275 = ORIENTED_EDGE('',*,*,#165185,.F.); +#165276 = CYLINDRICAL_SURFACE('',#165277,1.E-02); +#165277 = AXIS2_PLACEMENT_3D('',#165278,#165279,#165280); +#165278 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.5)); +#165279 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#165280 = DIRECTION('',(-1.110223024625E-14,1.232595164407E-30,1.)); +#165281 = ADVANCED_FACE('',(#165282),#165361,.F.); +#165282 = FACE_BOUND('',#165283,.F.); +#165283 = EDGE_LOOP('',(#165284,#165285,#165286,#165295,#165303,#165312, + #165320,#165328,#165336,#165345,#165353,#165360)); +#165284 = ORIENTED_EDGE('',*,*,#164498,.F.); +#165285 = ORIENTED_EDGE('',*,*,#164513,.T.); +#165286 = ORIENTED_EDGE('',*,*,#165287,.T.); +#165287 = EDGE_CURVE('',#164514,#165288,#165290,.T.); +#165288 = VERTEX_POINT('',#165289); +#165289 = CARTESIAN_POINT('',(0.79518671351,0.1625,0.501736481777)); +#165290 = CIRCLE('',#165291,1.E-02); +#165291 = AXIS2_PLACEMENT_3D('',#165292,#165293,#165294); +#165292 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.5)); +#165293 = DIRECTION('',(-1.110223024625E-16,1.,-3.284293273311E-47)); +#165294 = DIRECTION('',(1.110223024625E-14,1.232595164407E-30,1.)); +#165295 = ORIENTED_EDGE('',*,*,#165296,.T.); +#165296 = EDGE_CURVE('',#165288,#165297,#165299,.T.); +#165297 = VERTEX_POINT('',#165298); +#165298 = CARTESIAN_POINT('',(0.852886526928,0.1625,0.157006846243)); +#165299 = LINE('',#165300,#165301); +#165300 = CARTESIAN_POINT('',(0.79518671351,0.1625,0.501736481777)); +#165301 = VECTOR('',#165302,1.); +#165302 = DIRECTION('',(0.165080604235,1.83276287741E-17,-0.986280078936 + )); +#165303 = ORIENTED_EDGE('',*,*,#165304,.T.); +#165304 = EDGE_CURVE('',#165297,#165305,#165307,.T.); +#165305 = VERTEX_POINT('',#165306); +#165306 = CARTESIAN_POINT('',(1.04,0.1625,-2.775557561563E-17)); +#165307 = CIRCLE('',#165308,0.19); +#165308 = AXIS2_PLACEMENT_3D('',#165309,#165310,#165311); +#165309 = CARTESIAN_POINT('',(1.04,0.1625,0.19)); +#165310 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#165311 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165312 = ORIENTED_EDGE('',*,*,#165313,.T.); +#165313 = EDGE_CURVE('',#165305,#165314,#165316,.T.); +#165314 = VERTEX_POINT('',#165315); +#165315 = CARTESIAN_POINT('',(1.05,0.1625,-2.775557561563E-17)); +#165316 = LINE('',#165317,#165318); +#165317 = CARTESIAN_POINT('',(1.04,0.1625,-2.775557561563E-17)); +#165318 = VECTOR('',#165319,1.); +#165319 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#165320 = ORIENTED_EDGE('',*,*,#165321,.T.); +#165321 = EDGE_CURVE('',#165314,#165322,#165324,.T.); +#165322 = VERTEX_POINT('',#165323); +#165323 = CARTESIAN_POINT('',(1.05,0.1625,0.18)); +#165324 = LINE('',#165325,#165326); +#165325 = CARTESIAN_POINT('',(1.05,0.1625,-2.775557561563E-17)); +#165326 = VECTOR('',#165327,1.); +#165327 = DIRECTION('',(0.,0.,1.)); +#165328 = ORIENTED_EDGE('',*,*,#165329,.T.); +#165329 = EDGE_CURVE('',#165322,#165330,#165332,.T.); +#165330 = VERTEX_POINT('',#165331); +#165331 = CARTESIAN_POINT('',(1.04,0.1625,0.18)); +#165332 = LINE('',#165333,#165334); +#165333 = CARTESIAN_POINT('',(1.05,0.1625,0.18)); +#165334 = VECTOR('',#165335,1.); +#165335 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#165336 = ORIENTED_EDGE('',*,*,#165337,.T.); +#165337 = EDGE_CURVE('',#165330,#165338,#165340,.T.); +#165338 = VERTEX_POINT('',#165339); +#165339 = CARTESIAN_POINT('',(1.03015192247,0.1625,0.188263518223)); +#165340 = CIRCLE('',#165341,1.E-02); +#165341 = AXIS2_PLACEMENT_3D('',#165342,#165343,#165344); +#165342 = CARTESIAN_POINT('',(1.04,0.1625,0.19)); +#165343 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#165344 = DIRECTION('',(0.,0.,-1.)); +#165345 = ORIENTED_EDGE('',*,*,#165346,.T.); +#165346 = EDGE_CURVE('',#165338,#165347,#165349,.T.); +#165347 = VERTEX_POINT('',#165348); +#165348 = CARTESIAN_POINT('',(0.972452109053,0.1625,0.532993153757)); +#165349 = LINE('',#165350,#165351); +#165350 = CARTESIAN_POINT('',(1.03015192247,0.1625,0.188263518223)); +#165351 = VECTOR('',#165352,1.); +#165352 = DIRECTION('',(-0.165080604235,-1.83276287741E-17, + 0.986280078936)); +#165353 = ORIENTED_EDGE('',*,*,#165354,.T.); +#165354 = EDGE_CURVE('',#165347,#164799,#165355,.T.); +#165355 = CIRCLE('',#165356,0.19); +#165356 = AXIS2_PLACEMENT_3D('',#165357,#165358,#165359); +#165357 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.5)); +#165358 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#165359 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#165360 = ORIENTED_EDGE('',*,*,#164798,.T.); +#165361 = PLANE('',#165362); +#165362 = AXIS2_PLACEMENT_3D('',#165363,#165364,#165365); +#165363 = CARTESIAN_POINT('',(0.830703739422,0.1625,0.404294248326)); +#165364 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165365 = DIRECTION('',(0.,0.,1.)); +#165366 = ADVANCED_FACE('',(#165367),#165386,.F.); +#165367 = FACE_BOUND('',#165368,.F.); +#165368 = EDGE_LOOP('',(#165369,#165370,#165379,#165385)); +#165369 = ORIENTED_EDGE('',*,*,#164530,.T.); +#165370 = ORIENTED_EDGE('',*,*,#165371,.T.); +#165371 = EDGE_CURVE('',#164523,#165372,#165374,.T.); +#165372 = VERTEX_POINT('',#165373); +#165373 = CARTESIAN_POINT('',(0.79518671351,-0.1625,0.501736481777)); +#165374 = CIRCLE('',#165375,1.E-02); +#165375 = AXIS2_PLACEMENT_3D('',#165376,#165377,#165378); +#165376 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.5)); +#165377 = DIRECTION('',(-1.110223024625E-16,1.,-3.284293273311E-47)); +#165378 = DIRECTION('',(1.110223024625E-14,1.232595164407E-30,1.)); +#165379 = ORIENTED_EDGE('',*,*,#165380,.F.); +#165380 = EDGE_CURVE('',#165288,#165372,#165381,.T.); +#165381 = LINE('',#165382,#165383); +#165382 = CARTESIAN_POINT('',(0.79518671351,0.1625,0.501736481777)); +#165383 = VECTOR('',#165384,1.); +#165384 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165385 = ORIENTED_EDGE('',*,*,#165287,.F.); +#165386 = CYLINDRICAL_SURFACE('',#165387,1.E-02); +#165387 = AXIS2_PLACEMENT_3D('',#165388,#165389,#165390); +#165388 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.5)); +#165389 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#165390 = DIRECTION('',(1.110223024625E-14,1.232595164407E-30,1.)); +#165391 = ADVANCED_FACE('',(#165392),#165463,.T.); +#165392 = FACE_BOUND('',#165393,.T.); +#165393 = EDGE_LOOP('',(#165394,#165395,#165396,#165397,#165405,#165414, + #165422,#165430,#165438,#165447,#165455,#165462)); +#165394 = ORIENTED_EDGE('',*,*,#164544,.F.); +#165395 = ORIENTED_EDGE('',*,*,#164522,.T.); +#165396 = ORIENTED_EDGE('',*,*,#165371,.T.); +#165397 = ORIENTED_EDGE('',*,*,#165398,.T.); +#165398 = EDGE_CURVE('',#165372,#165399,#165401,.T.); +#165399 = VERTEX_POINT('',#165400); +#165400 = CARTESIAN_POINT('',(0.852886526928,-0.1625,0.157006846243)); +#165401 = LINE('',#165402,#165403); +#165402 = CARTESIAN_POINT('',(0.79518671351,-0.1625,0.501736481777)); +#165403 = VECTOR('',#165404,1.); +#165404 = DIRECTION('',(0.165080604235,1.83276287741E-17,-0.986280078936 + )); +#165405 = ORIENTED_EDGE('',*,*,#165406,.T.); +#165406 = EDGE_CURVE('',#165399,#165407,#165409,.T.); +#165407 = VERTEX_POINT('',#165408); +#165408 = CARTESIAN_POINT('',(1.04,-0.1625,-2.775557561563E-17)); +#165409 = CIRCLE('',#165410,0.19); +#165410 = AXIS2_PLACEMENT_3D('',#165411,#165412,#165413); +#165411 = CARTESIAN_POINT('',(1.04,-0.1625,0.19)); +#165412 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#165413 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165414 = ORIENTED_EDGE('',*,*,#165415,.T.); +#165415 = EDGE_CURVE('',#165407,#165416,#165418,.T.); +#165416 = VERTEX_POINT('',#165417); +#165417 = CARTESIAN_POINT('',(1.05,-0.1625,-2.775557561563E-17)); +#165418 = LINE('',#165419,#165420); +#165419 = CARTESIAN_POINT('',(1.04,-0.1625,-2.775557561563E-17)); +#165420 = VECTOR('',#165421,1.); +#165421 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#165422 = ORIENTED_EDGE('',*,*,#165423,.T.); +#165423 = EDGE_CURVE('',#165416,#165424,#165426,.T.); +#165424 = VERTEX_POINT('',#165425); +#165425 = CARTESIAN_POINT('',(1.05,-0.1625,0.18)); +#165426 = LINE('',#165427,#165428); +#165427 = CARTESIAN_POINT('',(1.05,-0.1625,-2.775557561563E-17)); +#165428 = VECTOR('',#165429,1.); +#165429 = DIRECTION('',(0.,0.,1.)); +#165430 = ORIENTED_EDGE('',*,*,#165431,.T.); +#165431 = EDGE_CURVE('',#165424,#165432,#165434,.T.); +#165432 = VERTEX_POINT('',#165433); +#165433 = CARTESIAN_POINT('',(1.04,-0.1625,0.18)); +#165434 = LINE('',#165435,#165436); +#165435 = CARTESIAN_POINT('',(1.05,-0.1625,0.18)); +#165436 = VECTOR('',#165437,1.); +#165437 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#165438 = ORIENTED_EDGE('',*,*,#165439,.T.); +#165439 = EDGE_CURVE('',#165432,#165440,#165442,.T.); +#165440 = VERTEX_POINT('',#165441); +#165441 = CARTESIAN_POINT('',(1.03015192247,-0.1625,0.188263518223)); +#165442 = CIRCLE('',#165443,1.E-02); +#165443 = AXIS2_PLACEMENT_3D('',#165444,#165445,#165446); +#165444 = CARTESIAN_POINT('',(1.04,-0.1625,0.19)); +#165445 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#165446 = DIRECTION('',(0.,0.,-1.)); +#165447 = ORIENTED_EDGE('',*,*,#165448,.T.); +#165448 = EDGE_CURVE('',#165440,#165449,#165451,.T.); +#165449 = VERTEX_POINT('',#165450); +#165450 = CARTESIAN_POINT('',(0.972452109053,-0.1625,0.532993153757)); +#165451 = LINE('',#165452,#165453); +#165452 = CARTESIAN_POINT('',(1.03015192247,-0.1625,0.188263518223)); +#165453 = VECTOR('',#165454,1.); +#165454 = DIRECTION('',(-0.165080604235,-1.83276287741E-17, + 0.986280078936)); +#165455 = ORIENTED_EDGE('',*,*,#165456,.T.); +#165456 = EDGE_CURVE('',#165449,#164807,#165457,.T.); +#165457 = CIRCLE('',#165458,0.19); +#165458 = AXIS2_PLACEMENT_3D('',#165459,#165460,#165461); +#165459 = CARTESIAN_POINT('',(0.78533863598,-0.1625,0.5)); +#165460 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#165461 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#165462 = ORIENTED_EDGE('',*,*,#164814,.T.); +#165463 = PLANE('',#165464); +#165464 = AXIS2_PLACEMENT_3D('',#165465,#165466,#165467); +#165465 = CARTESIAN_POINT('',(0.830703739422,-0.1625,0.404294248326)); +#165466 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165467 = DIRECTION('',(0.,0.,1.)); +#165468 = ADVANCED_FACE('',(#165469),#165480,.T.); +#165469 = FACE_BOUND('',#165470,.T.); +#165470 = EDGE_LOOP('',(#165471,#165472,#165473,#165474)); +#165471 = ORIENTED_EDGE('',*,*,#165252,.T.); +#165472 = ORIENTED_EDGE('',*,*,#164599,.T.); +#165473 = ORIENTED_EDGE('',*,*,#164905,.F.); +#165474 = ORIENTED_EDGE('',*,*,#165475,.F.); +#165475 = EDGE_CURVE('',#165245,#164898,#165476,.T.); +#165476 = LINE('',#165477,#165478); +#165477 = CARTESIAN_POINT('',(-0.972452109053,0.4875,0.532993153757)); +#165478 = VECTOR('',#165479,1.); +#165479 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165480 = CYLINDRICAL_SURFACE('',#165481,0.19); +#165481 = AXIS2_PLACEMENT_3D('',#165482,#165483,#165484); +#165482 = CARTESIAN_POINT('',(-0.78533863598,0.4875,0.5)); +#165483 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165484 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#165485 = ADVANCED_FACE('',(#165486),#165499,.F.); +#165486 = FACE_BOUND('',#165487,.F.); +#165487 = EDGE_LOOP('',(#165488,#165489,#165495,#165496,#165497,#165498) + ); +#165488 = ORIENTED_EDGE('',*,*,#165043,.F.); +#165489 = ORIENTED_EDGE('',*,*,#165490,.T.); +#165490 = EDGE_CURVE('',#165035,#165144,#165491,.T.); +#165491 = LINE('',#165492,#165493); +#165492 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.69)); +#165493 = VECTOR('',#165494,1.); +#165494 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165495 = ORIENTED_EDGE('',*,*,#165152,.T.); +#165496 = ORIENTED_EDGE('',*,*,#165169,.T.); +#165497 = ORIENTED_EDGE('',*,*,#164646,.F.); +#165498 = ORIENTED_EDGE('',*,*,#164922,.F.); +#165499 = PLANE('',#165500); +#165500 = AXIS2_PLACEMENT_3D('',#165501,#165502,#165503); +#165501 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.69)); +#165502 = DIRECTION('',(0.,0.,-1.)); +#165503 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165504 = ADVANCED_FACE('',(#165505,#165534),#165545,.T.); +#165505 = FACE_BOUND('',#165506,.T.); +#165506 = EDGE_LOOP('',(#165507,#165508,#165509,#165517,#165525,#165531, + #165532,#165533)); +#165507 = ORIENTED_EDGE('',*,*,#164698,.F.); +#165508 = ORIENTED_EDGE('',*,*,#164669,.F.); +#165509 = ORIENTED_EDGE('',*,*,#165510,.F.); +#165510 = EDGE_CURVE('',#165511,#164670,#165513,.T.); +#165511 = VERTEX_POINT('',#165512); +#165512 = CARTESIAN_POINT('',(-0.426352968955,-0.87770593791,1.1)); +#165513 = LINE('',#165514,#165515); +#165514 = CARTESIAN_POINT('',(-0.426352968955,-0.87770593791,1.1)); +#165515 = VECTOR('',#165516,1.); +#165516 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#165517 = ORIENTED_EDGE('',*,*,#165518,.F.); +#165518 = EDGE_CURVE('',#165519,#165511,#165521,.T.); +#165519 = VERTEX_POINT('',#165520); +#165520 = CARTESIAN_POINT('',(0.426352968955,-0.87770593791,1.1)); +#165521 = LINE('',#165522,#165523); +#165522 = CARTESIAN_POINT('',(0.426352968955,-0.87770593791,1.1)); +#165523 = VECTOR('',#165524,1.); +#165524 = DIRECTION('',(-1.,0.,0.)); +#165525 = ORIENTED_EDGE('',*,*,#165526,.F.); +#165526 = EDGE_CURVE('',#164777,#165519,#165527,.T.); +#165527 = LINE('',#165528,#165529); +#165528 = CARTESIAN_POINT('',(0.50270593791,-0.801352968955,1.1)); +#165529 = VECTOR('',#165530,1.); +#165530 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#165531 = ORIENTED_EDGE('',*,*,#164783,.F.); +#165532 = ORIENTED_EDGE('',*,*,#164744,.F.); +#165533 = ORIENTED_EDGE('',*,*,#164721,.F.); +#165534 = FACE_BOUND('',#165535,.T.); +#165535 = EDGE_LOOP('',(#165536)); +#165536 = ORIENTED_EDGE('',*,*,#165537,.F.); +#165537 = EDGE_CURVE('',#165538,#165538,#165540,.T.); +#165538 = VERTEX_POINT('',#165539); +#165539 = CARTESIAN_POINT('',(-0.224394156537,0.692164750328,1.1)); +#165540 = CIRCLE('',#165541,9.277059379095E-02); +#165541 = AXIS2_PLACEMENT_3D('',#165542,#165543,#165544); +#165542 = CARTESIAN_POINT('',(-0.317164750328,0.692164750328,1.1)); +#165543 = DIRECTION('',(0.,0.,1.)); +#165544 = DIRECTION('',(1.,0.,-0.)); +#165545 = PLANE('',#165546); +#165546 = AXIS2_PLACEMENT_3D('',#165547,#165548,#165549); +#165547 = CARTESIAN_POINT('',(-0.50270593791,0.801352968955,1.1)); +#165548 = DIRECTION('',(-0.,0.,1.)); +#165549 = DIRECTION('',(0.484148291183,-0.874985961113,0.)); +#165550 = ADVANCED_FACE('',(#165551),#165561,.F.); +#165551 = FACE_BOUND('',#165552,.F.); +#165552 = EDGE_LOOP('',(#165553,#165554,#165555,#165556)); +#165553 = ORIENTED_EDGE('',*,*,#164929,.T.); +#165554 = ORIENTED_EDGE('',*,*,#164677,.T.); +#165555 = ORIENTED_EDGE('',*,*,#165510,.F.); +#165556 = ORIENTED_EDGE('',*,*,#165557,.F.); +#165557 = EDGE_CURVE('',#164930,#165511,#165558,.T.); +#165558 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#165559,#165560), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#165559 = CARTESIAN_POINT('',(-0.4625,-0.95,0.69)); +#165560 = CARTESIAN_POINT('',(-0.426352968955,-0.87770593791,1.1)); +#165561 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#165562,#165563) + ,(#165564,#165565 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.159099025767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#165562 = CARTESIAN_POINT('',(-0.4625,-0.95,0.69)); +#165563 = CARTESIAN_POINT('',(-0.426352968955,-0.87770593791,1.1)); +#165564 = CARTESIAN_POINT('',(-0.575,-0.8375,0.69)); +#165565 = CARTESIAN_POINT('',(-0.50270593791,-0.801352968955,1.1)); +#165566 = ADVANCED_FACE('',(#165567),#165577,.F.); +#165567 = FACE_BOUND('',#165568,.F.); +#165568 = EDGE_LOOP('',(#165569,#165570,#165575,#165576)); +#165569 = ORIENTED_EDGE('',*,*,#164945,.T.); +#165570 = ORIENTED_EDGE('',*,*,#165571,.T.); +#165571 = EDGE_CURVE('',#164938,#165519,#165572,.T.); +#165572 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#165573,#165574), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#165573 = CARTESIAN_POINT('',(0.4625,-0.95,0.69)); +#165574 = CARTESIAN_POINT('',(0.426352968955,-0.87770593791,1.1)); +#165575 = ORIENTED_EDGE('',*,*,#165526,.F.); +#165576 = ORIENTED_EDGE('',*,*,#164776,.F.); +#165577 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#165578,#165579) + ,(#165580,#165581 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.159099025767),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#165578 = CARTESIAN_POINT('',(0.575,-0.8375,0.69)); +#165579 = CARTESIAN_POINT('',(0.50270593791,-0.801352968955,1.1)); +#165580 = CARTESIAN_POINT('',(0.4625,-0.95,0.69)); +#165581 = CARTESIAN_POINT('',(0.426352968955,-0.87770593791,1.1)); +#165582 = ADVANCED_FACE('',(#165583),#165594,.T.); +#165583 = FACE_BOUND('',#165584,.T.); +#165584 = EDGE_LOOP('',(#165585,#165586,#165587,#165588)); +#165585 = ORIENTED_EDGE('',*,*,#165354,.T.); +#165586 = ORIENTED_EDGE('',*,*,#164806,.T.); +#165587 = ORIENTED_EDGE('',*,*,#165456,.F.); +#165588 = ORIENTED_EDGE('',*,*,#165589,.F.); +#165589 = EDGE_CURVE('',#165347,#165449,#165590,.T.); +#165590 = LINE('',#165591,#165592); +#165591 = CARTESIAN_POINT('',(0.972452109053,0.1625,0.532993153757)); +#165592 = VECTOR('',#165593,1.); +#165593 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165594 = CYLINDRICAL_SURFACE('',#165595,0.19); +#165595 = AXIS2_PLACEMENT_3D('',#165596,#165597,#165598); +#165596 = CARTESIAN_POINT('',(0.78533863598,0.1625,0.5)); +#165597 = DIRECTION('',(-1.110223024625E-16,1.,-0.)); +#165598 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#165599 = ADVANCED_FACE('',(#165600),#165611,.F.); +#165600 = FACE_BOUND('',#165601,.F.); +#165601 = EDGE_LOOP('',(#165602,#165608,#165609,#165610)); +#165602 = ORIENTED_EDGE('',*,*,#165603,.T.); +#165603 = EDGE_CURVE('',#165236,#164889,#165604,.T.); +#165604 = LINE('',#165605,#165606); +#165605 = CARTESIAN_POINT('',(-1.03015192247,0.4875,0.188263518223)); +#165606 = VECTOR('',#165607,1.); +#165607 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165608 = ORIENTED_EDGE('',*,*,#164897,.T.); +#165609 = ORIENTED_EDGE('',*,*,#165475,.F.); +#165610 = ORIENTED_EDGE('',*,*,#165244,.F.); +#165611 = PLANE('',#165612); +#165612 = AXIS2_PLACEMENT_3D('',#165613,#165614,#165615); +#165613 = CARTESIAN_POINT('',(-1.03015192247,0.4875,0.188263518223)); +#165614 = DIRECTION('',(0.986280078936,-1.094990852363E-16, + -0.165080604235)); +#165615 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#165616 = ADVANCED_FACE('',(#165617),#165628,.F.); +#165617 = FACE_BOUND('',#165618,.F.); +#165618 = EDGE_LOOP('',(#165619,#165625,#165626,#165627)); +#165619 = ORIENTED_EDGE('',*,*,#165620,.T.); +#165620 = EDGE_CURVE('',#165228,#164881,#165621,.T.); +#165621 = LINE('',#165622,#165623); +#165622 = CARTESIAN_POINT('',(-1.04,0.4875,0.18)); +#165623 = VECTOR('',#165624,1.); +#165624 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165625 = ORIENTED_EDGE('',*,*,#164888,.T.); +#165626 = ORIENTED_EDGE('',*,*,#165603,.F.); +#165627 = ORIENTED_EDGE('',*,*,#165235,.F.); +#165628 = CYLINDRICAL_SURFACE('',#165629,1.E-02); +#165629 = AXIS2_PLACEMENT_3D('',#165630,#165631,#165632); +#165630 = CARTESIAN_POINT('',(-1.04,0.4875,0.19)); +#165631 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#165632 = DIRECTION('',(-0.,0.,-1.)); +#165633 = ADVANCED_FACE('',(#165634),#165645,.F.); +#165634 = FACE_BOUND('',#165635,.F.); +#165635 = EDGE_LOOP('',(#165636,#165642,#165643,#165644)); +#165636 = ORIENTED_EDGE('',*,*,#165637,.T.); +#165637 = EDGE_CURVE('',#165220,#164873,#165638,.T.); +#165638 = LINE('',#165639,#165640); +#165639 = CARTESIAN_POINT('',(-1.05,0.4875,0.18)); +#165640 = VECTOR('',#165641,1.); +#165641 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165642 = ORIENTED_EDGE('',*,*,#164880,.T.); +#165643 = ORIENTED_EDGE('',*,*,#165620,.F.); +#165644 = ORIENTED_EDGE('',*,*,#165227,.F.); +#165645 = PLANE('',#165646); +#165646 = AXIS2_PLACEMENT_3D('',#165647,#165648,#165649); +#165647 = CARTESIAN_POINT('',(-1.05,0.4875,0.18)); +#165648 = DIRECTION('',(0.,0.,-1.)); +#165649 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165650 = ADVANCED_FACE('',(#165651),#165662,.F.); +#165651 = FACE_BOUND('',#165652,.F.); +#165652 = EDGE_LOOP('',(#165653,#165659,#165660,#165661)); +#165653 = ORIENTED_EDGE('',*,*,#165654,.T.); +#165654 = EDGE_CURVE('',#165212,#164865,#165655,.T.); +#165655 = LINE('',#165656,#165657); +#165656 = CARTESIAN_POINT('',(-1.05,0.4875,-2.775557561563E-17)); +#165657 = VECTOR('',#165658,1.); +#165658 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165659 = ORIENTED_EDGE('',*,*,#164872,.T.); +#165660 = ORIENTED_EDGE('',*,*,#165637,.F.); +#165661 = ORIENTED_EDGE('',*,*,#165219,.F.); +#165662 = PLANE('',#165663); +#165663 = AXIS2_PLACEMENT_3D('',#165664,#165665,#165666); +#165664 = CARTESIAN_POINT('',(-1.05,0.4875,-2.775557561563E-17)); +#165665 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165666 = DIRECTION('',(0.,0.,1.)); +#165667 = ADVANCED_FACE('',(#165668),#165679,.F.); +#165668 = FACE_BOUND('',#165669,.F.); +#165669 = EDGE_LOOP('',(#165670,#165676,#165677,#165678)); +#165670 = ORIENTED_EDGE('',*,*,#165671,.T.); +#165671 = EDGE_CURVE('',#165203,#164856,#165672,.T.); +#165672 = LINE('',#165673,#165674); +#165673 = CARTESIAN_POINT('',(-1.04,0.4875,-2.775557561563E-17)); +#165674 = VECTOR('',#165675,1.); +#165675 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165676 = ORIENTED_EDGE('',*,*,#164864,.T.); +#165677 = ORIENTED_EDGE('',*,*,#165654,.F.); +#165678 = ORIENTED_EDGE('',*,*,#165211,.F.); +#165679 = PLANE('',#165680); +#165680 = AXIS2_PLACEMENT_3D('',#165681,#165682,#165683); +#165681 = CARTESIAN_POINT('',(-1.04,0.4875,-2.775557561563E-17)); +#165682 = DIRECTION('',(0.,0.,1.)); +#165683 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#165684 = ADVANCED_FACE('',(#165685),#165696,.T.); +#165685 = FACE_BOUND('',#165686,.T.); +#165686 = EDGE_LOOP('',(#165687,#165688,#165689,#165690)); +#165687 = ORIENTED_EDGE('',*,*,#165202,.T.); +#165688 = ORIENTED_EDGE('',*,*,#165671,.T.); +#165689 = ORIENTED_EDGE('',*,*,#164855,.F.); +#165690 = ORIENTED_EDGE('',*,*,#165691,.F.); +#165691 = EDGE_CURVE('',#165195,#164848,#165692,.T.); +#165692 = LINE('',#165693,#165694); +#165693 = CARTESIAN_POINT('',(-0.852886526928,0.4875,0.157006846243)); +#165694 = VECTOR('',#165695,1.); +#165695 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165696 = CYLINDRICAL_SURFACE('',#165697,0.19); +#165697 = AXIS2_PLACEMENT_3D('',#165698,#165699,#165700); +#165698 = CARTESIAN_POINT('',(-1.04,0.4875,0.19)); +#165699 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165700 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165701 = ADVANCED_FACE('',(#165702),#165708,.F.); +#165702 = FACE_BOUND('',#165703,.F.); +#165703 = EDGE_LOOP('',(#165704,#165705,#165706,#165707)); +#165704 = ORIENTED_EDGE('',*,*,#165270,.T.); +#165705 = ORIENTED_EDGE('',*,*,#164847,.T.); +#165706 = ORIENTED_EDGE('',*,*,#165691,.F.); +#165707 = ORIENTED_EDGE('',*,*,#165194,.F.); +#165708 = PLANE('',#165709); +#165709 = AXIS2_PLACEMENT_3D('',#165710,#165711,#165712); +#165710 = CARTESIAN_POINT('',(-0.79518671351,0.4875,0.501736481777)); +#165711 = DIRECTION('',(-0.986280078936,1.094990852363E-16, + 0.165080604235)); +#165712 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#165713 = ADVANCED_FACE('',(#165714),#165720,.F.); +#165714 = FACE_BOUND('',#165715,.F.); +#165715 = EDGE_LOOP('',(#165716,#165717,#165718,#165719)); +#165716 = ORIENTED_EDGE('',*,*,#164937,.T.); +#165717 = ORIENTED_EDGE('',*,*,#165557,.T.); +#165718 = ORIENTED_EDGE('',*,*,#165518,.F.); +#165719 = ORIENTED_EDGE('',*,*,#165571,.F.); +#165720 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#165721,#165722) + ,(#165723,#165724 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.925),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#165721 = CARTESIAN_POINT('',(0.4625,-0.95,0.69)); +#165722 = CARTESIAN_POINT('',(0.426352968955,-0.87770593791,1.1)); +#165723 = CARTESIAN_POINT('',(-0.4625,-0.95,0.69)); +#165724 = CARTESIAN_POINT('',(-0.426352968955,-0.87770593791,1.1)); +#165725 = ADVANCED_FACE('',(#165726),#165737,.T.); +#165726 = FACE_BOUND('',#165727,.T.); +#165727 = EDGE_LOOP('',(#165728,#165729,#165730,#165731)); +#165728 = ORIENTED_EDGE('',*,*,#165034,.T.); +#165729 = ORIENTED_EDGE('',*,*,#165490,.T.); +#165730 = ORIENTED_EDGE('',*,*,#165143,.F.); +#165731 = ORIENTED_EDGE('',*,*,#165732,.F.); +#165732 = EDGE_CURVE('',#165027,#165136,#165733,.T.); +#165733 = LINE('',#165734,#165735); +#165734 = CARTESIAN_POINT('',(-0.972452109053,-0.8125,0.532993153757)); +#165735 = VECTOR('',#165736,1.); +#165736 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165737 = CYLINDRICAL_SURFACE('',#165738,0.19); +#165738 = AXIS2_PLACEMENT_3D('',#165739,#165740,#165741); +#165739 = CARTESIAN_POINT('',(-0.78533863598,-0.8125,0.5)); +#165740 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165741 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#165742 = ADVANCED_FACE('',(#165743),#165754,.F.); +#165743 = FACE_BOUND('',#165744,.F.); +#165744 = EDGE_LOOP('',(#165745,#165751,#165752,#165753)); +#165745 = ORIENTED_EDGE('',*,*,#165746,.T.); +#165746 = EDGE_CURVE('',#165018,#165127,#165747,.T.); +#165747 = LINE('',#165748,#165749); +#165748 = CARTESIAN_POINT('',(-1.03015192247,-0.8125,0.188263518223)); +#165749 = VECTOR('',#165750,1.); +#165750 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165751 = ORIENTED_EDGE('',*,*,#165135,.T.); +#165752 = ORIENTED_EDGE('',*,*,#165732,.F.); +#165753 = ORIENTED_EDGE('',*,*,#165026,.F.); +#165754 = PLANE('',#165755); +#165755 = AXIS2_PLACEMENT_3D('',#165756,#165757,#165758); +#165756 = CARTESIAN_POINT('',(-1.03015192247,-0.8125,0.188263518223)); +#165757 = DIRECTION('',(0.986280078936,-1.094990852363E-16, + -0.165080604235)); +#165758 = DIRECTION('',(0.165080604235,-1.83276287741E-17,0.986280078936 + )); +#165759 = ADVANCED_FACE('',(#165760),#165771,.F.); +#165760 = FACE_BOUND('',#165761,.F.); +#165761 = EDGE_LOOP('',(#165762,#165768,#165769,#165770)); +#165762 = ORIENTED_EDGE('',*,*,#165763,.T.); +#165763 = EDGE_CURVE('',#165010,#165119,#165764,.T.); +#165764 = LINE('',#165765,#165766); +#165765 = CARTESIAN_POINT('',(-1.04,-0.8125,0.18)); +#165766 = VECTOR('',#165767,1.); +#165767 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165768 = ORIENTED_EDGE('',*,*,#165126,.T.); +#165769 = ORIENTED_EDGE('',*,*,#165746,.F.); +#165770 = ORIENTED_EDGE('',*,*,#165017,.F.); +#165771 = CYLINDRICAL_SURFACE('',#165772,1.E-02); +#165772 = AXIS2_PLACEMENT_3D('',#165773,#165774,#165775); +#165773 = CARTESIAN_POINT('',(-1.04,-0.8125,0.19)); +#165774 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#165775 = DIRECTION('',(-0.,0.,-1.)); +#165776 = ADVANCED_FACE('',(#165777),#165788,.F.); +#165777 = FACE_BOUND('',#165778,.F.); +#165778 = EDGE_LOOP('',(#165779,#165785,#165786,#165787)); +#165779 = ORIENTED_EDGE('',*,*,#165780,.T.); +#165780 = EDGE_CURVE('',#165002,#165111,#165781,.T.); +#165781 = LINE('',#165782,#165783); +#165782 = CARTESIAN_POINT('',(-1.05,-0.8125,0.18)); +#165783 = VECTOR('',#165784,1.); +#165784 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165785 = ORIENTED_EDGE('',*,*,#165118,.T.); +#165786 = ORIENTED_EDGE('',*,*,#165763,.F.); +#165787 = ORIENTED_EDGE('',*,*,#165009,.F.); +#165788 = PLANE('',#165789); +#165789 = AXIS2_PLACEMENT_3D('',#165790,#165791,#165792); +#165790 = CARTESIAN_POINT('',(-1.05,-0.8125,0.18)); +#165791 = DIRECTION('',(0.,0.,-1.)); +#165792 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165793 = ADVANCED_FACE('',(#165794),#165805,.F.); +#165794 = FACE_BOUND('',#165795,.F.); +#165795 = EDGE_LOOP('',(#165796,#165802,#165803,#165804)); +#165796 = ORIENTED_EDGE('',*,*,#165797,.T.); +#165797 = EDGE_CURVE('',#164994,#165103,#165798,.T.); +#165798 = LINE('',#165799,#165800); +#165799 = CARTESIAN_POINT('',(-1.05,-0.8125,-2.775557561563E-17)); +#165800 = VECTOR('',#165801,1.); +#165801 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165802 = ORIENTED_EDGE('',*,*,#165110,.T.); +#165803 = ORIENTED_EDGE('',*,*,#165780,.F.); +#165804 = ORIENTED_EDGE('',*,*,#165001,.F.); +#165805 = PLANE('',#165806); +#165806 = AXIS2_PLACEMENT_3D('',#165807,#165808,#165809); +#165807 = CARTESIAN_POINT('',(-1.05,-0.8125,-2.775557561563E-17)); +#165808 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#165809 = DIRECTION('',(0.,0.,1.)); +#165810 = ADVANCED_FACE('',(#165811),#165822,.F.); +#165811 = FACE_BOUND('',#165812,.F.); +#165812 = EDGE_LOOP('',(#165813,#165819,#165820,#165821)); +#165813 = ORIENTED_EDGE('',*,*,#165814,.T.); +#165814 = EDGE_CURVE('',#164985,#165094,#165815,.T.); +#165815 = LINE('',#165816,#165817); +#165816 = CARTESIAN_POINT('',(-1.04,-0.8125,-2.775557561563E-17)); +#165817 = VECTOR('',#165818,1.); +#165818 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165819 = ORIENTED_EDGE('',*,*,#165102,.T.); +#165820 = ORIENTED_EDGE('',*,*,#165797,.F.); +#165821 = ORIENTED_EDGE('',*,*,#164993,.F.); +#165822 = PLANE('',#165823); +#165823 = AXIS2_PLACEMENT_3D('',#165824,#165825,#165826); +#165824 = CARTESIAN_POINT('',(-1.04,-0.8125,-2.775557561563E-17)); +#165825 = DIRECTION('',(0.,0.,1.)); +#165826 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#165827 = ADVANCED_FACE('',(#165828),#165839,.T.); +#165828 = FACE_BOUND('',#165829,.T.); +#165829 = EDGE_LOOP('',(#165830,#165831,#165832,#165833)); +#165830 = ORIENTED_EDGE('',*,*,#164984,.T.); +#165831 = ORIENTED_EDGE('',*,*,#165814,.T.); +#165832 = ORIENTED_EDGE('',*,*,#165093,.F.); +#165833 = ORIENTED_EDGE('',*,*,#165834,.F.); +#165834 = EDGE_CURVE('',#164977,#165086,#165835,.T.); +#165835 = LINE('',#165836,#165837); +#165836 = CARTESIAN_POINT('',(-0.852886526928,-0.8125,0.157006846243)); +#165837 = VECTOR('',#165838,1.); +#165838 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#165839 = CYLINDRICAL_SURFACE('',#165840,0.19); +#165840 = AXIS2_PLACEMENT_3D('',#165841,#165842,#165843); +#165841 = CARTESIAN_POINT('',(-1.04,-0.8125,0.19)); +#165842 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#165843 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165844 = ADVANCED_FACE('',(#165845),#165851,.F.); +#165845 = FACE_BOUND('',#165846,.F.); +#165846 = EDGE_LOOP('',(#165847,#165848,#165849,#165850)); +#165847 = ORIENTED_EDGE('',*,*,#165067,.T.); +#165848 = ORIENTED_EDGE('',*,*,#165085,.T.); +#165849 = ORIENTED_EDGE('',*,*,#165834,.F.); +#165850 = ORIENTED_EDGE('',*,*,#164976,.F.); +#165851 = PLANE('',#165852); +#165852 = AXIS2_PLACEMENT_3D('',#165853,#165854,#165855); +#165853 = CARTESIAN_POINT('',(-0.79518671351,-0.8125,0.501736481777)); +#165854 = DIRECTION('',(-0.986280078936,1.094990852363E-16, + 0.165080604235)); +#165855 = DIRECTION('',(-0.165080604235,1.83276287741E-17, + -0.986280078936)); +#165856 = ADVANCED_FACE('',(#165857),#165868,.F.); +#165857 = FACE_BOUND('',#165858,.F.); +#165858 = EDGE_LOOP('',(#165859,#165865,#165866,#165867)); +#165859 = ORIENTED_EDGE('',*,*,#165860,.T.); +#165860 = EDGE_CURVE('',#165338,#165440,#165861,.T.); +#165861 = LINE('',#165862,#165863); +#165862 = CARTESIAN_POINT('',(1.03015192247,0.1625,0.188263518223)); +#165863 = VECTOR('',#165864,1.); +#165864 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165865 = ORIENTED_EDGE('',*,*,#165448,.T.); +#165866 = ORIENTED_EDGE('',*,*,#165589,.F.); +#165867 = ORIENTED_EDGE('',*,*,#165346,.F.); +#165868 = PLANE('',#165869); +#165869 = AXIS2_PLACEMENT_3D('',#165870,#165871,#165872); +#165870 = CARTESIAN_POINT('',(1.03015192247,0.1625,0.188263518223)); +#165871 = DIRECTION('',(-0.986280078936,-1.094990852363E-16, + -0.165080604235)); +#165872 = DIRECTION('',(-0.165080604235,-1.83276287741E-17, + 0.986280078936)); +#165873 = ADVANCED_FACE('',(#165874),#165885,.F.); +#165874 = FACE_BOUND('',#165875,.F.); +#165875 = EDGE_LOOP('',(#165876,#165882,#165883,#165884)); +#165876 = ORIENTED_EDGE('',*,*,#165877,.T.); +#165877 = EDGE_CURVE('',#165330,#165432,#165878,.T.); +#165878 = LINE('',#165879,#165880); +#165879 = CARTESIAN_POINT('',(1.04,0.1625,0.18)); +#165880 = VECTOR('',#165881,1.); +#165881 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165882 = ORIENTED_EDGE('',*,*,#165439,.T.); +#165883 = ORIENTED_EDGE('',*,*,#165860,.F.); +#165884 = ORIENTED_EDGE('',*,*,#165337,.F.); +#165885 = CYLINDRICAL_SURFACE('',#165886,1.E-02); +#165886 = AXIS2_PLACEMENT_3D('',#165887,#165888,#165889); +#165887 = CARTESIAN_POINT('',(1.04,0.1625,0.19)); +#165888 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#165889 = DIRECTION('',(0.,0.,-1.)); +#165890 = ADVANCED_FACE('',(#165891),#165902,.F.); +#165891 = FACE_BOUND('',#165892,.F.); +#165892 = EDGE_LOOP('',(#165893,#165899,#165900,#165901)); +#165893 = ORIENTED_EDGE('',*,*,#165894,.T.); +#165894 = EDGE_CURVE('',#165322,#165424,#165895,.T.); +#165895 = LINE('',#165896,#165897); +#165896 = CARTESIAN_POINT('',(1.05,0.1625,0.18)); +#165897 = VECTOR('',#165898,1.); +#165898 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165899 = ORIENTED_EDGE('',*,*,#165431,.T.); +#165900 = ORIENTED_EDGE('',*,*,#165877,.F.); +#165901 = ORIENTED_EDGE('',*,*,#165329,.F.); +#165902 = PLANE('',#165903); +#165903 = AXIS2_PLACEMENT_3D('',#165904,#165905,#165906); +#165904 = CARTESIAN_POINT('',(1.05,0.1625,0.18)); +#165905 = DIRECTION('',(0.,0.,-1.)); +#165906 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#165907 = ADVANCED_FACE('',(#165908),#165919,.F.); +#165908 = FACE_BOUND('',#165909,.F.); +#165909 = EDGE_LOOP('',(#165910,#165916,#165917,#165918)); +#165910 = ORIENTED_EDGE('',*,*,#165911,.T.); +#165911 = EDGE_CURVE('',#165314,#165416,#165912,.T.); +#165912 = LINE('',#165913,#165914); +#165913 = CARTESIAN_POINT('',(1.05,0.1625,-2.775557561563E-17)); +#165914 = VECTOR('',#165915,1.); +#165915 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165916 = ORIENTED_EDGE('',*,*,#165423,.T.); +#165917 = ORIENTED_EDGE('',*,*,#165894,.F.); +#165918 = ORIENTED_EDGE('',*,*,#165321,.F.); +#165919 = PLANE('',#165920); +#165920 = AXIS2_PLACEMENT_3D('',#165921,#165922,#165923); +#165921 = CARTESIAN_POINT('',(1.05,0.1625,-2.775557561563E-17)); +#165922 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#165923 = DIRECTION('',(0.,0.,1.)); +#165924 = ADVANCED_FACE('',(#165925),#165936,.F.); +#165925 = FACE_BOUND('',#165926,.F.); +#165926 = EDGE_LOOP('',(#165927,#165933,#165934,#165935)); +#165927 = ORIENTED_EDGE('',*,*,#165928,.T.); +#165928 = EDGE_CURVE('',#165305,#165407,#165929,.T.); +#165929 = LINE('',#165930,#165931); +#165930 = CARTESIAN_POINT('',(1.04,0.1625,-2.775557561563E-17)); +#165931 = VECTOR('',#165932,1.); +#165932 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165933 = ORIENTED_EDGE('',*,*,#165415,.T.); +#165934 = ORIENTED_EDGE('',*,*,#165911,.F.); +#165935 = ORIENTED_EDGE('',*,*,#165313,.F.); +#165936 = PLANE('',#165937); +#165937 = AXIS2_PLACEMENT_3D('',#165938,#165939,#165940); +#165938 = CARTESIAN_POINT('',(1.04,0.1625,-2.775557561563E-17)); +#165939 = DIRECTION('',(0.,0.,1.)); +#165940 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#165941 = ADVANCED_FACE('',(#165942),#165953,.T.); +#165942 = FACE_BOUND('',#165943,.T.); +#165943 = EDGE_LOOP('',(#165944,#165945,#165946,#165947)); +#165944 = ORIENTED_EDGE('',*,*,#165304,.T.); +#165945 = ORIENTED_EDGE('',*,*,#165928,.T.); +#165946 = ORIENTED_EDGE('',*,*,#165406,.F.); +#165947 = ORIENTED_EDGE('',*,*,#165948,.F.); +#165948 = EDGE_CURVE('',#165297,#165399,#165949,.T.); +#165949 = LINE('',#165950,#165951); +#165950 = CARTESIAN_POINT('',(0.852886526928,0.1625,0.157006846243)); +#165951 = VECTOR('',#165952,1.); +#165952 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#165953 = CYLINDRICAL_SURFACE('',#165954,0.19); +#165954 = AXIS2_PLACEMENT_3D('',#165955,#165956,#165957); +#165955 = CARTESIAN_POINT('',(1.04,0.1625,0.19)); +#165956 = DIRECTION('',(-1.110223024625E-16,1.,-0.)); +#165957 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#165958 = ADVANCED_FACE('',(#165959),#165965,.F.); +#165959 = FACE_BOUND('',#165960,.F.); +#165960 = EDGE_LOOP('',(#165961,#165962,#165963,#165964)); +#165961 = ORIENTED_EDGE('',*,*,#165380,.T.); +#165962 = ORIENTED_EDGE('',*,*,#165398,.T.); +#165963 = ORIENTED_EDGE('',*,*,#165948,.F.); +#165964 = ORIENTED_EDGE('',*,*,#165296,.F.); +#165965 = PLANE('',#165966); +#165966 = AXIS2_PLACEMENT_3D('',#165967,#165968,#165969); +#165967 = CARTESIAN_POINT('',(0.79518671351,0.1625,0.501736481777)); +#165968 = DIRECTION('',(0.986280078936,1.094990852363E-16,0.165080604235 + )); +#165969 = DIRECTION('',(0.165080604235,1.83276287741E-17,-0.986280078936 + )); +#165970 = ADVANCED_FACE('',(#165971),#165972,.T.); +#165971 = FACE_BOUND('',#165535,.F.); +#165972 = PLANE('',#165973); +#165973 = AXIS2_PLACEMENT_3D('',#165974,#165975,#165976); +#165974 = CARTESIAN_POINT('',(-0.317164750328,0.692164750328,1.1)); +#165975 = DIRECTION('',(0.,0.,1.)); +#165976 = DIRECTION('',(1.,0.,-0.)); +#165977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#165981)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#165978,#165979,#165980)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#165978 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#165979 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#165980 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#165981 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#165978, + 'distance_accuracy_value','confusion accuracy'); +#165982 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#165983,#165985); +#165983 = ( REPRESENTATION_RELATIONSHIP('','',#163843,#163820) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#165984) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#165984 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163821); +#165985 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #165986); +#165986 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('76','=>[0:1:1:40]','',#163815, + #163838,$); +#165987 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#163840)); +#165988 = SHAPE_DEFINITION_REPRESENTATION(#165989,#165995); +#165989 = PRODUCT_DEFINITION_SHAPE('','',#165990); +#165990 = PRODUCT_DEFINITION('design','',#165991,#165994); +#165991 = PRODUCT_DEFINITION_FORMATION('','',#165992); +#165992 = PRODUCT('D_SOD-123','D_SOD-123','',(#165993)); +#165993 = PRODUCT_CONTEXT('',#2,'mechanical'); +#165994 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#165995 = SHAPE_REPRESENTATION('',(#11,#165996),#166000); +#165996 = AXIS2_PLACEMENT_3D('',#165997,#165998,#165999); +#165997 = CARTESIAN_POINT('',(0.,0.,0.)); +#165998 = DIRECTION('',(0.,0.,1.)); +#165999 = DIRECTION('',(1.,0.,-0.)); +#166000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#166004)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#166001,#166002,#166003)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#166001 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#166002 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#166003 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#166004 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#166001, + 'distance_accuracy_value','confusion accuracy'); +#166005 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#166006,#166008); +#166006 = ( REPRESENTATION_RELATIONSHIP('','',#165995,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#166007) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#166007 = ITEM_DEFINED_TRANSFORMATION('','',#11,#239); +#166008 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #166009); +#166009 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('79','D_OR1','',#5,#165990,$); +#166010 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#165992)); +#166011 = SHAPE_DEFINITION_REPRESENTATION(#166012,#166018); +#166012 = PRODUCT_DEFINITION_SHAPE('','',#166013); +#166013 = PRODUCT_DEFINITION('design','',#166014,#166017); +#166014 = PRODUCT_DEFINITION_FORMATION('','',#166015); +#166015 = PRODUCT('D_SOD-123','D_SOD-123','',(#166016)); +#166016 = PRODUCT_CONTEXT('',#2,'mechanical'); +#166017 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#166018 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#166019),#167707); +#166019 = MANIFOLD_SOLID_BREP('',#166020); +#166020 = CLOSED_SHELL('',(#166021,#166075,#166138,#166161,#166191, + #166224,#166254,#166277,#166300,#166323,#166346,#166369,#166402, + #166425,#166448,#166536,#166611,#166635,#166703,#166791,#166807, + #166823,#166839,#166855,#166872,#166905,#166922,#166944,#166975, + #166998,#167021,#167044,#167074,#167091,#167108,#167125,#167142, + #167159,#167176,#167193,#167205,#167228,#167251,#167268,#167343, + #167367,#167435,#167452,#167502,#167519,#167536,#167553,#167570, + #167587,#167599,#167630,#167654,#167678,#167695)); +#166021 = ADVANCED_FACE('',(#166022),#166070,.F.); +#166022 = FACE_BOUND('',#166023,.F.); +#166023 = EDGE_LOOP('',(#166024,#166034,#166041,#166049,#166057,#166065) + ); +#166024 = ORIENTED_EDGE('',*,*,#166025,.T.); +#166025 = EDGE_CURVE('',#166026,#166028,#166030,.T.); +#166026 = VERTEX_POINT('',#166027); +#166027 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166028 = VERTEX_POINT('',#166029); +#166029 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#166030 = LINE('',#166031,#166032); +#166031 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166032 = VECTOR('',#166033,1.); +#166033 = DIRECTION('',(0.,1.,0.)); +#166034 = ORIENTED_EDGE('',*,*,#166035,.T.); +#166035 = EDGE_CURVE('',#166028,#166036,#166038,.T.); +#166036 = VERTEX_POINT('',#166037); +#166037 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166038 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166039,#166040), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166039 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#166040 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166041 = ORIENTED_EDGE('',*,*,#166042,.F.); +#166042 = EDGE_CURVE('',#166043,#166036,#166045,.T.); +#166043 = VERTEX_POINT('',#166044); +#166044 = CARTESIAN_POINT('',(-1.375,0.325,0.575)); +#166045 = LINE('',#166046,#166047); +#166046 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166047 = VECTOR('',#166048,1.); +#166048 = DIRECTION('',(0.,1.,0.)); +#166049 = ORIENTED_EDGE('',*,*,#166050,.F.); +#166050 = EDGE_CURVE('',#166051,#166043,#166053,.T.); +#166051 = VERTEX_POINT('',#166052); +#166052 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#166053 = LINE('',#166054,#166055); +#166054 = CARTESIAN_POINT('',(-1.375,-0.325,0.575)); +#166055 = VECTOR('',#166056,1.); +#166056 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#166057 = ORIENTED_EDGE('',*,*,#166058,.F.); +#166058 = EDGE_CURVE('',#166059,#166051,#166061,.T.); +#166059 = VERTEX_POINT('',#166060); +#166060 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166061 = LINE('',#166062,#166063); +#166062 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166063 = VECTOR('',#166064,1.); +#166064 = DIRECTION('',(0.,1.,0.)); +#166065 = ORIENTED_EDGE('',*,*,#166066,.F.); +#166066 = EDGE_CURVE('',#166026,#166059,#166067,.T.); +#166067 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166068,#166069), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166068 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166069 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166070 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166071,#166072) + ,(#166073,#166074 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#166071 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166072 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166073 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#166074 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166075 = ADVANCED_FACE('',(#166076),#166133,.F.); +#166076 = FACE_BOUND('',#166077,.T.); +#166077 = EDGE_LOOP('',(#166078,#166079,#166087,#166095,#166103,#166111, + #166119,#166127)); +#166078 = ORIENTED_EDGE('',*,*,#166025,.T.); +#166079 = ORIENTED_EDGE('',*,*,#166080,.T.); +#166080 = EDGE_CURVE('',#166028,#166081,#166083,.T.); +#166081 = VERTEX_POINT('',#166082); +#166082 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#166083 = LINE('',#166084,#166085); +#166084 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#166085 = VECTOR('',#166086,1.); +#166086 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166087 = ORIENTED_EDGE('',*,*,#166088,.T.); +#166088 = EDGE_CURVE('',#166081,#166089,#166091,.T.); +#166089 = VERTEX_POINT('',#166090); +#166090 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#166091 = LINE('',#166092,#166093); +#166092 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#166093 = VECTOR('',#166094,1.); +#166094 = DIRECTION('',(1.,0.,0.)); +#166095 = ORIENTED_EDGE('',*,*,#166096,.T.); +#166096 = EDGE_CURVE('',#166089,#166097,#166099,.T.); +#166097 = VERTEX_POINT('',#166098); +#166098 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#166099 = LINE('',#166100,#166101); +#166100 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#166101 = VECTOR('',#166102,1.); +#166102 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166103 = ORIENTED_EDGE('',*,*,#166104,.T.); +#166104 = EDGE_CURVE('',#166097,#166105,#166107,.T.); +#166105 = VERTEX_POINT('',#166106); +#166106 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#166107 = LINE('',#166108,#166109); +#166108 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#166109 = VECTOR('',#166110,1.); +#166110 = DIRECTION('',(0.,-1.,0.)); +#166111 = ORIENTED_EDGE('',*,*,#166112,.T.); +#166112 = EDGE_CURVE('',#166105,#166113,#166115,.T.); +#166113 = VERTEX_POINT('',#166114); +#166114 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#166115 = LINE('',#166116,#166117); +#166116 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#166117 = VECTOR('',#166118,1.); +#166118 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166119 = ORIENTED_EDGE('',*,*,#166120,.T.); +#166120 = EDGE_CURVE('',#166113,#166121,#166123,.T.); +#166121 = VERTEX_POINT('',#166122); +#166122 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#166123 = LINE('',#166124,#166125); +#166124 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#166125 = VECTOR('',#166126,1.); +#166126 = DIRECTION('',(-1.,0.,0.)); +#166127 = ORIENTED_EDGE('',*,*,#166128,.T.); +#166128 = EDGE_CURVE('',#166121,#166026,#166129,.T.); +#166129 = LINE('',#166130,#166131); +#166130 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#166131 = VECTOR('',#166132,1.); +#166132 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166133 = PLANE('',#166134); +#166134 = AXIS2_PLACEMENT_3D('',#166135,#166136,#166137); +#166135 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166136 = DIRECTION('',(0.,0.,1.)); +#166137 = DIRECTION('',(0.889616464678,0.456708381546,-0.)); +#166138 = ADVANCED_FACE('',(#166139),#166156,.F.); +#166139 = FACE_BOUND('',#166140,.F.); +#166140 = EDGE_LOOP('',(#166141,#166142,#166149,#166155)); +#166141 = ORIENTED_EDGE('',*,*,#166080,.T.); +#166142 = ORIENTED_EDGE('',*,*,#166143,.T.); +#166143 = EDGE_CURVE('',#166081,#166144,#166146,.T.); +#166144 = VERTEX_POINT('',#166145); +#166145 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166146 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166147,#166148), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166147 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#166148 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166149 = ORIENTED_EDGE('',*,*,#166150,.F.); +#166150 = EDGE_CURVE('',#166036,#166144,#166151,.T.); +#166151 = LINE('',#166152,#166153); +#166152 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166153 = VECTOR('',#166154,1.); +#166154 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166155 = ORIENTED_EDGE('',*,*,#166035,.F.); +#166156 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166157,#166158) + ,(#166159,#166160 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#166157 = CARTESIAN_POINT('',(-1.308243103516,0.671621551758,0.1)); +#166158 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166159 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#166160 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166161 = ADVANCED_FACE('',(#166162),#166186,.F.); +#166162 = FACE_BOUND('',#166163,.F.); +#166163 = EDGE_LOOP('',(#166164,#166171,#166172,#166180)); +#166164 = ORIENTED_EDGE('',*,*,#166165,.F.); +#166165 = EDGE_CURVE('',#166059,#166166,#166168,.T.); +#166166 = VERTEX_POINT('',#166167); +#166167 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166168 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166169,#166170), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166169 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166170 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166171 = ORIENTED_EDGE('',*,*,#166058,.T.); +#166172 = ORIENTED_EDGE('',*,*,#166173,.T.); +#166173 = EDGE_CURVE('',#166051,#166174,#166176,.T.); +#166174 = VERTEX_POINT('',#166175); +#166175 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#166176 = LINE('',#166177,#166178); +#166177 = CARTESIAN_POINT('',(-1.375,-0.325,0.579830288983)); +#166178 = VECTOR('',#166179,1.); +#166179 = DIRECTION('',(0.,0.,1.)); +#166180 = ORIENTED_EDGE('',*,*,#166181,.F.); +#166181 = EDGE_CURVE('',#166166,#166174,#166182,.T.); +#166182 = LINE('',#166183,#166184); +#166183 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166184 = VECTOR('',#166185,1.); +#166185 = DIRECTION('',(0.,1.,0.)); +#166186 = PLANE('',#166187); +#166187 = AXIS2_PLACEMENT_3D('',#166188,#166189,#166190); +#166188 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166189 = DIRECTION('',(1.,0.,0.)); +#166190 = DIRECTION('',(-0.,1.,0.)); +#166191 = ADVANCED_FACE('',(#166192),#166219,.F.); +#166192 = FACE_BOUND('',#166193,.F.); +#166193 = EDGE_LOOP('',(#166194,#166195,#166204,#166212)); +#166194 = ORIENTED_EDGE('',*,*,#166050,.T.); +#166195 = ORIENTED_EDGE('',*,*,#166196,.T.); +#166196 = EDGE_CURVE('',#166043,#166197,#166199,.T.); +#166197 = VERTEX_POINT('',#166198); +#166198 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#166199 = CIRCLE('',#166200,0.12); +#166200 = AXIS2_PLACEMENT_3D('',#166201,#166202,#166203); +#166201 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#166202 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#166203 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#166204 = ORIENTED_EDGE('',*,*,#166205,.F.); +#166205 = EDGE_CURVE('',#166206,#166197,#166208,.T.); +#166206 = VERTEX_POINT('',#166207); +#166207 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#166208 = LINE('',#166209,#166210); +#166209 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#166210 = VECTOR('',#166211,1.); +#166211 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#166212 = ORIENTED_EDGE('',*,*,#166213,.F.); +#166213 = EDGE_CURVE('',#166051,#166206,#166214,.T.); +#166214 = CIRCLE('',#166215,0.12); +#166215 = AXIS2_PLACEMENT_3D('',#166216,#166217,#166218); +#166216 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#166217 = DIRECTION('',(-1.110223024625E-16,-1.,-1.003534056487E-47)); +#166218 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#166219 = CYLINDRICAL_SURFACE('',#166220,0.12); +#166220 = AXIS2_PLACEMENT_3D('',#166221,#166222,#166223); +#166221 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#166222 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#166223 = DIRECTION('',(9.251858538543E-16,-1.027162637006E-31,1.)); +#166224 = ADVANCED_FACE('',(#166225),#166249,.F.); +#166225 = FACE_BOUND('',#166226,.F.); +#166226 = EDGE_LOOP('',(#166227,#166235,#166236,#166243)); +#166227 = ORIENTED_EDGE('',*,*,#166228,.F.); +#166228 = EDGE_CURVE('',#166043,#166229,#166231,.T.); +#166229 = VERTEX_POINT('',#166230); +#166230 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#166231 = LINE('',#166232,#166233); +#166232 = CARTESIAN_POINT('',(-1.375,0.325,0.579830288983)); +#166233 = VECTOR('',#166234,1.); +#166234 = DIRECTION('',(0.,0.,1.)); +#166235 = ORIENTED_EDGE('',*,*,#166042,.T.); +#166236 = ORIENTED_EDGE('',*,*,#166237,.T.); +#166237 = EDGE_CURVE('',#166036,#166238,#166240,.T.); +#166238 = VERTEX_POINT('',#166239); +#166239 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#166240 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166241,#166242), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166241 = CARTESIAN_POINT('',(-1.375,0.705,0.575)); +#166242 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#166243 = ORIENTED_EDGE('',*,*,#166244,.F.); +#166244 = EDGE_CURVE('',#166229,#166238,#166245,.T.); +#166245 = LINE('',#166246,#166247); +#166246 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166247 = VECTOR('',#166248,1.); +#166248 = DIRECTION('',(0.,1.,0.)); +#166249 = PLANE('',#166250); +#166250 = AXIS2_PLACEMENT_3D('',#166251,#166252,#166253); +#166251 = CARTESIAN_POINT('',(-1.375,-0.705,0.775)); +#166252 = DIRECTION('',(1.,0.,0.)); +#166253 = DIRECTION('',(-0.,1.,0.)); +#166254 = ADVANCED_FACE('',(#166255),#166272,.F.); +#166255 = FACE_BOUND('',#166256,.F.); +#166256 = EDGE_LOOP('',(#166257,#166258,#166259,#166267)); +#166257 = ORIENTED_EDGE('',*,*,#166128,.T.); +#166258 = ORIENTED_EDGE('',*,*,#166066,.T.); +#166259 = ORIENTED_EDGE('',*,*,#166260,.F.); +#166260 = EDGE_CURVE('',#166261,#166059,#166263,.T.); +#166261 = VERTEX_POINT('',#166262); +#166262 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166263 = LINE('',#166264,#166265); +#166264 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166265 = VECTOR('',#166266,1.); +#166266 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166267 = ORIENTED_EDGE('',*,*,#166268,.F.); +#166268 = EDGE_CURVE('',#166121,#166261,#166269,.T.); +#166269 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166270,#166271), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166270 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#166271 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166272 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166273,#166274) + ,(#166275,#166276 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#166273 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#166274 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166275 = CARTESIAN_POINT('',(-1.308243103516,-0.671621551758,0.1)); +#166276 = CARTESIAN_POINT('',(-1.375,-0.705,0.575)); +#166277 = ADVANCED_FACE('',(#166278),#166295,.F.); +#166278 = FACE_BOUND('',#166279,.F.); +#166279 = EDGE_LOOP('',(#166280,#166281,#166282,#166290)); +#166280 = ORIENTED_EDGE('',*,*,#166120,.T.); +#166281 = ORIENTED_EDGE('',*,*,#166268,.T.); +#166282 = ORIENTED_EDGE('',*,*,#166283,.F.); +#166283 = EDGE_CURVE('',#166284,#166261,#166286,.T.); +#166284 = VERTEX_POINT('',#166285); +#166285 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166286 = LINE('',#166287,#166288); +#166287 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166288 = VECTOR('',#166289,1.); +#166289 = DIRECTION('',(-1.,0.,0.)); +#166290 = ORIENTED_EDGE('',*,*,#166291,.F.); +#166291 = EDGE_CURVE('',#166113,#166284,#166292,.T.); +#166292 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166293,#166294), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166293 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#166294 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166295 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166296,#166297) + ,(#166298,#166299 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#166296 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#166297 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166298 = CARTESIAN_POINT('',(-1.246621551758,-0.733243103516,0.1)); +#166299 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166300 = ADVANCED_FACE('',(#166301),#166318,.F.); +#166301 = FACE_BOUND('',#166302,.F.); +#166302 = EDGE_LOOP('',(#166303,#166304,#166311,#166317)); +#166303 = ORIENTED_EDGE('',*,*,#166088,.T.); +#166304 = ORIENTED_EDGE('',*,*,#166305,.T.); +#166305 = EDGE_CURVE('',#166089,#166306,#166308,.T.); +#166306 = VERTEX_POINT('',#166307); +#166307 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166308 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166309,#166310), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166309 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#166310 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166311 = ORIENTED_EDGE('',*,*,#166312,.F.); +#166312 = EDGE_CURVE('',#166144,#166306,#166313,.T.); +#166313 = LINE('',#166314,#166315); +#166314 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166315 = VECTOR('',#166316,1.); +#166316 = DIRECTION('',(1.,0.,0.)); +#166317 = ORIENTED_EDGE('',*,*,#166143,.F.); +#166318 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166319,#166320) + ,(#166321,#166322 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.56),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#166319 = CARTESIAN_POINT('',(-1.246621551758,0.733243103516,0.1)); +#166320 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166321 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#166322 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166323 = ADVANCED_FACE('',(#166324),#166341,.F.); +#166324 = FACE_BOUND('',#166325,.F.); +#166325 = EDGE_LOOP('',(#166326,#166327,#166328,#166336)); +#166326 = ORIENTED_EDGE('',*,*,#166112,.T.); +#166327 = ORIENTED_EDGE('',*,*,#166291,.T.); +#166328 = ORIENTED_EDGE('',*,*,#166329,.F.); +#166329 = EDGE_CURVE('',#166330,#166284,#166332,.T.); +#166330 = VERTEX_POINT('',#166331); +#166331 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166332 = LINE('',#166333,#166334); +#166333 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166334 = VECTOR('',#166335,1.); +#166335 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166336 = ORIENTED_EDGE('',*,*,#166337,.F.); +#166337 = EDGE_CURVE('',#166105,#166330,#166338,.T.); +#166338 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166339,#166340), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166339 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#166340 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166341 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166342,#166343) + ,(#166344,#166345 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#166342 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#166343 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166344 = CARTESIAN_POINT('',(1.246621551758,-0.733243103516,0.1)); +#166345 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166346 = ADVANCED_FACE('',(#166347),#166364,.F.); +#166347 = FACE_BOUND('',#166348,.F.); +#166348 = EDGE_LOOP('',(#166349,#166350,#166357,#166363)); +#166349 = ORIENTED_EDGE('',*,*,#166096,.T.); +#166350 = ORIENTED_EDGE('',*,*,#166351,.T.); +#166351 = EDGE_CURVE('',#166097,#166352,#166354,.T.); +#166352 = VERTEX_POINT('',#166353); +#166353 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166354 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166355,#166356), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166355 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#166356 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166357 = ORIENTED_EDGE('',*,*,#166358,.F.); +#166358 = EDGE_CURVE('',#166306,#166352,#166359,.T.); +#166359 = LINE('',#166360,#166361); +#166360 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166361 = VECTOR('',#166362,1.); +#166362 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166363 = ORIENTED_EDGE('',*,*,#166305,.F.); +#166364 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166365,#166366) + ,(#166367,#166368 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#166365 = CARTESIAN_POINT('',(1.246621551758,0.733243103516,0.1)); +#166366 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166367 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#166368 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166369 = ADVANCED_FACE('',(#166370),#166397,.F.); +#166370 = FACE_BOUND('',#166371,.F.); +#166371 = EDGE_LOOP('',(#166372,#166373,#166374,#166382,#166390,#166396) + ); +#166372 = ORIENTED_EDGE('',*,*,#166104,.T.); +#166373 = ORIENTED_EDGE('',*,*,#166337,.T.); +#166374 = ORIENTED_EDGE('',*,*,#166375,.F.); +#166375 = EDGE_CURVE('',#166376,#166330,#166378,.T.); +#166376 = VERTEX_POINT('',#166377); +#166377 = CARTESIAN_POINT('',(1.375,-0.325,0.575)); +#166378 = LINE('',#166379,#166380); +#166379 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166380 = VECTOR('',#166381,1.); +#166381 = DIRECTION('',(0.,-1.,0.)); +#166382 = ORIENTED_EDGE('',*,*,#166383,.F.); +#166383 = EDGE_CURVE('',#166384,#166376,#166386,.T.); +#166384 = VERTEX_POINT('',#166385); +#166385 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#166386 = LINE('',#166387,#166388); +#166387 = CARTESIAN_POINT('',(1.375,0.325,0.575)); +#166388 = VECTOR('',#166389,1.); +#166389 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#166390 = ORIENTED_EDGE('',*,*,#166391,.F.); +#166391 = EDGE_CURVE('',#166352,#166384,#166392,.T.); +#166392 = LINE('',#166393,#166394); +#166393 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166394 = VECTOR('',#166395,1.); +#166395 = DIRECTION('',(0.,-1.,0.)); +#166396 = ORIENTED_EDGE('',*,*,#166351,.F.); +#166397 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166398,#166399) + ,(#166400,#166401 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#166398 = CARTESIAN_POINT('',(1.308243103516,0.671621551758,0.1)); +#166399 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166400 = CARTESIAN_POINT('',(1.308243103516,-0.671621551758,0.1)); +#166401 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166402 = ADVANCED_FACE('',(#166403),#166420,.F.); +#166403 = FACE_BOUND('',#166404,.F.); +#166404 = EDGE_LOOP('',(#166405,#166406,#166413,#166419)); +#166405 = ORIENTED_EDGE('',*,*,#166150,.T.); +#166406 = ORIENTED_EDGE('',*,*,#166407,.T.); +#166407 = EDGE_CURVE('',#166144,#166408,#166410,.T.); +#166408 = VERTEX_POINT('',#166409); +#166409 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#166410 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166411,#166412), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166411 = CARTESIAN_POINT('',(-1.28,0.8,0.575)); +#166412 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#166413 = ORIENTED_EDGE('',*,*,#166414,.F.); +#166414 = EDGE_CURVE('',#166238,#166408,#166415,.T.); +#166415 = LINE('',#166416,#166417); +#166416 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#166417 = VECTOR('',#166418,1.); +#166418 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166419 = ORIENTED_EDGE('',*,*,#166237,.F.); +#166420 = PLANE('',#166421); +#166421 = AXIS2_PLACEMENT_3D('',#166422,#166423,#166424); +#166422 = CARTESIAN_POINT('',(-1.375,0.705,0.775)); +#166423 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166424 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166425 = ADVANCED_FACE('',(#166426),#166443,.F.); +#166426 = FACE_BOUND('',#166427,.F.); +#166427 = EDGE_LOOP('',(#166428,#166429,#166430,#166438)); +#166428 = ORIENTED_EDGE('',*,*,#166260,.T.); +#166429 = ORIENTED_EDGE('',*,*,#166165,.T.); +#166430 = ORIENTED_EDGE('',*,*,#166431,.F.); +#166431 = EDGE_CURVE('',#166432,#166166,#166434,.T.); +#166432 = VERTEX_POINT('',#166433); +#166433 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#166434 = LINE('',#166435,#166436); +#166435 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#166436 = VECTOR('',#166437,1.); +#166437 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166438 = ORIENTED_EDGE('',*,*,#166439,.F.); +#166439 = EDGE_CURVE('',#166261,#166432,#166440,.T.); +#166440 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166441,#166442), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166441 = CARTESIAN_POINT('',(-1.28,-0.8,0.575)); +#166442 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#166443 = PLANE('',#166444); +#166444 = AXIS2_PLACEMENT_3D('',#166445,#166446,#166447); +#166445 = CARTESIAN_POINT('',(-1.28,-0.8,0.775)); +#166446 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166447 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166448 = ADVANCED_FACE('',(#166449),#166531,.F.); +#166449 = FACE_BOUND('',#166450,.F.); +#166450 = EDGE_LOOP('',(#166451,#166452,#166453,#166461,#166469,#166477, + #166485,#166493,#166501,#166509,#166517,#166525)); +#166451 = ORIENTED_EDGE('',*,*,#166431,.T.); +#166452 = ORIENTED_EDGE('',*,*,#166181,.T.); +#166453 = ORIENTED_EDGE('',*,*,#166454,.T.); +#166454 = EDGE_CURVE('',#166174,#166455,#166457,.T.); +#166455 = VERTEX_POINT('',#166456); +#166456 = CARTESIAN_POINT('',(-1.35,-0.325,0.775)); +#166457 = LINE('',#166458,#166459); +#166458 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#166459 = VECTOR('',#166460,1.); +#166460 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#166461 = ORIENTED_EDGE('',*,*,#166462,.F.); +#166462 = EDGE_CURVE('',#166463,#166455,#166465,.T.); +#166463 = VERTEX_POINT('',#166464); +#166464 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#166465 = LINE('',#166466,#166467); +#166466 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#166467 = VECTOR('',#166468,1.); +#166468 = DIRECTION('',(0.,1.,0.)); +#166469 = ORIENTED_EDGE('',*,*,#166470,.F.); +#166470 = EDGE_CURVE('',#166471,#166463,#166473,.T.); +#166471 = VERTEX_POINT('',#166472); +#166472 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#166473 = LINE('',#166474,#166475); +#166474 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#166475 = VECTOR('',#166476,1.); +#166476 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166477 = ORIENTED_EDGE('',*,*,#166478,.F.); +#166478 = EDGE_CURVE('',#166479,#166471,#166481,.T.); +#166479 = VERTEX_POINT('',#166480); +#166480 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#166481 = LINE('',#166482,#166483); +#166482 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#166483 = VECTOR('',#166484,1.); +#166484 = DIRECTION('',(-1.,0.,0.)); +#166485 = ORIENTED_EDGE('',*,*,#166486,.F.); +#166486 = EDGE_CURVE('',#166487,#166479,#166489,.T.); +#166487 = VERTEX_POINT('',#166488); +#166488 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#166489 = LINE('',#166490,#166491); +#166490 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#166491 = VECTOR('',#166492,1.); +#166492 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166493 = ORIENTED_EDGE('',*,*,#166494,.F.); +#166494 = EDGE_CURVE('',#166495,#166487,#166497,.T.); +#166495 = VERTEX_POINT('',#166496); +#166496 = CARTESIAN_POINT('',(1.35,-0.325,0.775)); +#166497 = LINE('',#166498,#166499); +#166498 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166499 = VECTOR('',#166500,1.); +#166500 = DIRECTION('',(0.,-1.,0.)); +#166501 = ORIENTED_EDGE('',*,*,#166502,.F.); +#166502 = EDGE_CURVE('',#166503,#166495,#166505,.T.); +#166503 = VERTEX_POINT('',#166504); +#166504 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#166505 = LINE('',#166506,#166507); +#166506 = CARTESIAN_POINT('',(1.375,-0.325,0.775)); +#166507 = VECTOR('',#166508,1.); +#166508 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#166509 = ORIENTED_EDGE('',*,*,#166510,.T.); +#166510 = EDGE_CURVE('',#166503,#166511,#166513,.T.); +#166511 = VERTEX_POINT('',#166512); +#166512 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#166513 = LINE('',#166514,#166515); +#166514 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166515 = VECTOR('',#166516,1.); +#166516 = DIRECTION('',(0.,-1.,0.)); +#166517 = ORIENTED_EDGE('',*,*,#166518,.T.); +#166518 = EDGE_CURVE('',#166511,#166519,#166521,.T.); +#166519 = VERTEX_POINT('',#166520); +#166520 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#166521 = LINE('',#166522,#166523); +#166522 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#166523 = VECTOR('',#166524,1.); +#166524 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166525 = ORIENTED_EDGE('',*,*,#166526,.T.); +#166526 = EDGE_CURVE('',#166519,#166432,#166527,.T.); +#166527 = LINE('',#166528,#166529); +#166528 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#166529 = VECTOR('',#166530,1.); +#166530 = DIRECTION('',(-1.,0.,0.)); +#166531 = PLANE('',#166532); +#166532 = AXIS2_PLACEMENT_3D('',#166533,#166534,#166535); +#166533 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#166534 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#166535 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#166536 = ADVANCED_FACE('',(#166537),#166606,.F.); +#166537 = FACE_BOUND('',#166538,.F.); +#166538 = EDGE_LOOP('',(#166539,#166540,#166541,#166549,#166558,#166566, + #166574,#166582,#166591,#166599)); +#166539 = ORIENTED_EDGE('',*,*,#166173,.F.); +#166540 = ORIENTED_EDGE('',*,*,#166213,.T.); +#166541 = ORIENTED_EDGE('',*,*,#166542,.T.); +#166542 = EDGE_CURVE('',#166206,#166543,#166545,.T.); +#166543 = VERTEX_POINT('',#166544); +#166544 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#166545 = LINE('',#166546,#166547); +#166546 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#166547 = VECTOR('',#166548,1.); +#166548 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#166549 = ORIENTED_EDGE('',*,*,#166550,.T.); +#166550 = EDGE_CURVE('',#166543,#166551,#166553,.T.); +#166551 = VERTEX_POINT('',#166552); +#166552 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#166553 = CIRCLE('',#166554,0.32); +#166554 = AXIS2_PLACEMENT_3D('',#166555,#166556,#166557); +#166555 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#166556 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#166557 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#166558 = ORIENTED_EDGE('',*,*,#166559,.T.); +#166559 = EDGE_CURVE('',#166551,#166560,#166562,.T.); +#166560 = VERTEX_POINT('',#166561); +#166561 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#166562 = LINE('',#166563,#166564); +#166563 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#166564 = VECTOR('',#166565,1.); +#166565 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#166566 = ORIENTED_EDGE('',*,*,#166567,.T.); +#166567 = EDGE_CURVE('',#166560,#166568,#166570,.T.); +#166568 = VERTEX_POINT('',#166569); +#166569 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#166570 = LINE('',#166571,#166572); +#166571 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#166572 = VECTOR('',#166573,1.); +#166573 = DIRECTION('',(0.,0.,1.)); +#166574 = ORIENTED_EDGE('',*,*,#166575,.T.); +#166575 = EDGE_CURVE('',#166568,#166576,#166578,.T.); +#166576 = VERTEX_POINT('',#166577); +#166577 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#166578 = LINE('',#166579,#166580); +#166579 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#166580 = VECTOR('',#166581,1.); +#166581 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#166582 = ORIENTED_EDGE('',*,*,#166583,.T.); +#166583 = EDGE_CURVE('',#166576,#166584,#166586,.T.); +#166584 = VERTEX_POINT('',#166585); +#166585 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#166586 = CIRCLE('',#166587,0.12); +#166587 = AXIS2_PLACEMENT_3D('',#166588,#166589,#166590); +#166588 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#166589 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#166590 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#166591 = ORIENTED_EDGE('',*,*,#166592,.T.); +#166592 = EDGE_CURVE('',#166584,#166593,#166595,.T.); +#166593 = VERTEX_POINT('',#166594); +#166594 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#166595 = LINE('',#166596,#166597); +#166596 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#166597 = VECTOR('',#166598,1.); +#166598 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#166599 = ORIENTED_EDGE('',*,*,#166600,.T.); +#166600 = EDGE_CURVE('',#166593,#166174,#166601,.T.); +#166601 = CIRCLE('',#166602,0.32); +#166602 = AXIS2_PLACEMENT_3D('',#166603,#166604,#166605); +#166603 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#166604 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#166605 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#166606 = PLANE('',#166607); +#166607 = AXIS2_PLACEMENT_3D('',#166608,#166609,#166610); +#166608 = CARTESIAN_POINT('',(-1.610729118287,-0.325,0.384660577966)); +#166609 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#166610 = DIRECTION('',(0.,-0.,1.)); +#166611 = ADVANCED_FACE('',(#166612),#166630,.F.); +#166612 = FACE_BOUND('',#166613,.F.); +#166613 = EDGE_LOOP('',(#166614,#166615,#166623,#166629)); +#166614 = ORIENTED_EDGE('',*,*,#166205,.T.); +#166615 = ORIENTED_EDGE('',*,*,#166616,.T.); +#166616 = EDGE_CURVE('',#166197,#166617,#166619,.T.); +#166617 = VERTEX_POINT('',#166618); +#166618 = CARTESIAN_POINT('',(-1.523665661432,0.325,0.264432583147)); +#166619 = LINE('',#166620,#166621); +#166620 = CARTESIAN_POINT('',(-1.493176930361,0.325,0.47583778132)); +#166621 = VECTOR('',#166622,1.); +#166622 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#166623 = ORIENTED_EDGE('',*,*,#166624,.F.); +#166624 = EDGE_CURVE('',#166543,#166617,#166625,.T.); +#166625 = LINE('',#166626,#166627); +#166626 = CARTESIAN_POINT('',(-1.523665661432,-0.325,0.264432583147)); +#166627 = VECTOR('',#166628,1.); +#166628 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#166629 = ORIENTED_EDGE('',*,*,#166542,.F.); +#166630 = PLANE('',#166631); +#166631 = AXIS2_PLACEMENT_3D('',#166632,#166633,#166634); +#166632 = CARTESIAN_POINT('',(-1.493176930361,-0.325,0.47583778132)); +#166633 = DIRECTION('',(-0.989759848633,1.098854172802E-16, + 0.142742572604)); +#166634 = DIRECTION('',(-0.142742572604,1.584760906992E-17, + -0.989759848633)); +#166635 = ADVANCED_FACE('',(#166636),#166698,.T.); +#166636 = FACE_BOUND('',#166637,.T.); +#166637 = EDGE_LOOP('',(#166638,#166639,#166640,#166641,#166650,#166658, + #166666,#166674,#166683,#166691)); +#166638 = ORIENTED_EDGE('',*,*,#166228,.F.); +#166639 = ORIENTED_EDGE('',*,*,#166196,.T.); +#166640 = ORIENTED_EDGE('',*,*,#166616,.T.); +#166641 = ORIENTED_EDGE('',*,*,#166642,.T.); +#166642 = EDGE_CURVE('',#166617,#166643,#166645,.T.); +#166643 = VERTEX_POINT('',#166644); +#166644 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#166645 = CIRCLE('',#166646,0.32); +#166646 = AXIS2_PLACEMENT_3D('',#166647,#166648,#166649); +#166647 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#166648 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#166649 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#166650 = ORIENTED_EDGE('',*,*,#166651,.T.); +#166651 = EDGE_CURVE('',#166643,#166652,#166654,.T.); +#166652 = VERTEX_POINT('',#166653); +#166653 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#166654 = LINE('',#166655,#166656); +#166655 = CARTESIAN_POINT('',(-1.838804142396,0.325,-5.551115123126E-17) + ); +#166656 = VECTOR('',#166657,1.); +#166657 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#166658 = ORIENTED_EDGE('',*,*,#166659,.T.); +#166659 = EDGE_CURVE('',#166652,#166660,#166662,.T.); +#166660 = VERTEX_POINT('',#166661); +#166661 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#166662 = LINE('',#166663,#166664); +#166663 = CARTESIAN_POINT('',(-1.9,0.325,-5.551115123126E-17)); +#166664 = VECTOR('',#166665,1.); +#166665 = DIRECTION('',(0.,0.,1.)); +#166666 = ORIENTED_EDGE('',*,*,#166667,.T.); +#166667 = EDGE_CURVE('',#166660,#166668,#166670,.T.); +#166668 = VERTEX_POINT('',#166669); +#166669 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.2)); +#166670 = LINE('',#166671,#166672); +#166671 = CARTESIAN_POINT('',(-1.9,0.325,0.2)); +#166672 = VECTOR('',#166673,1.); +#166673 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#166674 = ORIENTED_EDGE('',*,*,#166675,.T.); +#166675 = EDGE_CURVE('',#166668,#166676,#166678,.T.); +#166676 = VERTEX_POINT('',#166677); +#166677 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#166678 = CIRCLE('',#166679,0.12); +#166679 = AXIS2_PLACEMENT_3D('',#166680,#166681,#166682); +#166680 = CARTESIAN_POINT('',(-1.838804142396,0.325,0.32)); +#166681 = DIRECTION('',(-1.110223024625E-16,-1.,2.0070681136E-47)); +#166682 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#166683 = ORIENTED_EDGE('',*,*,#166684,.T.); +#166684 = EDGE_CURVE('',#166676,#166685,#166687,.T.); +#166685 = VERTEX_POINT('',#166686); +#166686 = CARTESIAN_POINT('',(-1.690138480964,0.325,0.510567416853)); +#166687 = LINE('',#166688,#166689); +#166688 = CARTESIAN_POINT('',(-1.720627212034,0.325,0.29916221868)); +#166689 = VECTOR('',#166690,1.); +#166690 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#166691 = ORIENTED_EDGE('',*,*,#166692,.T.); +#166692 = EDGE_CURVE('',#166685,#166229,#166693,.T.); +#166693 = CIRCLE('',#166694,0.32); +#166694 = AXIS2_PLACEMENT_3D('',#166695,#166696,#166697); +#166695 = CARTESIAN_POINT('',(-1.375,0.325,0.455)); +#166696 = DIRECTION('',(1.110223024625E-16,1.,6.255634725081E-34)); +#166697 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#166698 = PLANE('',#166699); +#166699 = AXIS2_PLACEMENT_3D('',#166700,#166701,#166702); +#166700 = CARTESIAN_POINT('',(-1.610729118287,0.325,0.384660577966)); +#166701 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#166702 = DIRECTION('',(0.,-0.,1.)); +#166703 = ADVANCED_FACE('',(#166704),#166786,.F.); +#166704 = FACE_BOUND('',#166705,.F.); +#166705 = EDGE_LOOP('',(#166706,#166714,#166715,#166716,#166724,#166732, + #166740,#166748,#166756,#166764,#166772,#166780)); +#166706 = ORIENTED_EDGE('',*,*,#166707,.F.); +#166707 = EDGE_CURVE('',#166229,#166708,#166710,.T.); +#166708 = VERTEX_POINT('',#166709); +#166709 = CARTESIAN_POINT('',(-1.35,0.325,0.775)); +#166710 = LINE('',#166711,#166712); +#166711 = CARTESIAN_POINT('',(-1.375,0.325,0.775)); +#166712 = VECTOR('',#166713,1.); +#166713 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#166714 = ORIENTED_EDGE('',*,*,#166244,.T.); +#166715 = ORIENTED_EDGE('',*,*,#166414,.T.); +#166716 = ORIENTED_EDGE('',*,*,#166717,.T.); +#166717 = EDGE_CURVE('',#166408,#166718,#166720,.T.); +#166718 = VERTEX_POINT('',#166719); +#166719 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#166720 = LINE('',#166721,#166722); +#166721 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#166722 = VECTOR('',#166723,1.); +#166723 = DIRECTION('',(1.,0.,0.)); +#166724 = ORIENTED_EDGE('',*,*,#166725,.T.); +#166725 = EDGE_CURVE('',#166718,#166726,#166728,.T.); +#166726 = VERTEX_POINT('',#166727); +#166727 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166728 = LINE('',#166729,#166730); +#166729 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#166730 = VECTOR('',#166731,1.); +#166731 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166732 = ORIENTED_EDGE('',*,*,#166733,.T.); +#166733 = EDGE_CURVE('',#166726,#166734,#166736,.T.); +#166734 = VERTEX_POINT('',#166735); +#166735 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#166736 = LINE('',#166737,#166738); +#166737 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166738 = VECTOR('',#166739,1.); +#166739 = DIRECTION('',(0.,-1.,0.)); +#166740 = ORIENTED_EDGE('',*,*,#166741,.T.); +#166741 = EDGE_CURVE('',#166734,#166742,#166744,.T.); +#166742 = VERTEX_POINT('',#166743); +#166743 = CARTESIAN_POINT('',(1.35,0.325,0.775)); +#166744 = LINE('',#166745,#166746); +#166745 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#166746 = VECTOR('',#166747,1.); +#166747 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#166748 = ORIENTED_EDGE('',*,*,#166749,.F.); +#166749 = EDGE_CURVE('',#166750,#166742,#166752,.T.); +#166750 = VERTEX_POINT('',#166751); +#166751 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166752 = LINE('',#166753,#166754); +#166753 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166754 = VECTOR('',#166755,1.); +#166755 = DIRECTION('',(0.,-1.,0.)); +#166756 = ORIENTED_EDGE('',*,*,#166757,.F.); +#166757 = EDGE_CURVE('',#166758,#166750,#166760,.T.); +#166758 = VERTEX_POINT('',#166759); +#166759 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#166760 = LINE('',#166761,#166762); +#166761 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#166762 = VECTOR('',#166763,1.); +#166763 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166764 = ORIENTED_EDGE('',*,*,#166765,.F.); +#166765 = EDGE_CURVE('',#166766,#166758,#166768,.T.); +#166766 = VERTEX_POINT('',#166767); +#166767 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#166768 = LINE('',#166769,#166770); +#166769 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#166770 = VECTOR('',#166771,1.); +#166771 = DIRECTION('',(1.,0.,0.)); +#166772 = ORIENTED_EDGE('',*,*,#166773,.F.); +#166773 = EDGE_CURVE('',#166774,#166766,#166776,.T.); +#166774 = VERTEX_POINT('',#166775); +#166775 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#166776 = LINE('',#166777,#166778); +#166777 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#166778 = VECTOR('',#166779,1.); +#166779 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#166780 = ORIENTED_EDGE('',*,*,#166781,.F.); +#166781 = EDGE_CURVE('',#166708,#166774,#166782,.T.); +#166782 = LINE('',#166783,#166784); +#166783 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#166784 = VECTOR('',#166785,1.); +#166785 = DIRECTION('',(0.,1.,0.)); +#166786 = PLANE('',#166787); +#166787 = AXIS2_PLACEMENT_3D('',#166788,#166789,#166790); +#166788 = CARTESIAN_POINT('',(-1.3625,-4.954714324773E-17,0.775)); +#166789 = DIRECTION('',(-7.340317518656E-17,9.85275154485E-18,-1.)); +#166790 = DIRECTION('',(7.342878714278E-20,1.,9.85275154485E-18)); +#166791 = ADVANCED_FACE('',(#166792),#166802,.F.); +#166792 = FACE_BOUND('',#166793,.F.); +#166793 = EDGE_LOOP('',(#166794,#166795,#166796,#166797)); +#166794 = ORIENTED_EDGE('',*,*,#166283,.T.); +#166795 = ORIENTED_EDGE('',*,*,#166439,.T.); +#166796 = ORIENTED_EDGE('',*,*,#166526,.F.); +#166797 = ORIENTED_EDGE('',*,*,#166798,.F.); +#166798 = EDGE_CURVE('',#166284,#166519,#166799,.T.); +#166799 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166800,#166801), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166800 = CARTESIAN_POINT('',(1.28,-0.8,0.575)); +#166801 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#166802 = PLANE('',#166803); +#166803 = AXIS2_PLACEMENT_3D('',#166804,#166805,#166806); +#166804 = CARTESIAN_POINT('',(1.28,-0.8,0.775)); +#166805 = DIRECTION('',(0.,1.,0.)); +#166806 = DIRECTION('',(-1.,0.,0.)); +#166807 = ADVANCED_FACE('',(#166808),#166818,.F.); +#166808 = FACE_BOUND('',#166809,.F.); +#166809 = EDGE_LOOP('',(#166810,#166811,#166816,#166817)); +#166810 = ORIENTED_EDGE('',*,*,#166312,.T.); +#166811 = ORIENTED_EDGE('',*,*,#166812,.T.); +#166812 = EDGE_CURVE('',#166306,#166718,#166813,.T.); +#166813 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166814,#166815), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166814 = CARTESIAN_POINT('',(1.28,0.8,0.575)); +#166815 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#166816 = ORIENTED_EDGE('',*,*,#166717,.F.); +#166817 = ORIENTED_EDGE('',*,*,#166407,.F.); +#166818 = PLANE('',#166819); +#166819 = AXIS2_PLACEMENT_3D('',#166820,#166821,#166822); +#166820 = CARTESIAN_POINT('',(-1.28,0.8,0.775)); +#166821 = DIRECTION('',(0.,-1.,0.)); +#166822 = DIRECTION('',(1.,0.,0.)); +#166823 = ADVANCED_FACE('',(#166824),#166834,.F.); +#166824 = FACE_BOUND('',#166825,.F.); +#166825 = EDGE_LOOP('',(#166826,#166827,#166828,#166829)); +#166826 = ORIENTED_EDGE('',*,*,#166329,.T.); +#166827 = ORIENTED_EDGE('',*,*,#166798,.T.); +#166828 = ORIENTED_EDGE('',*,*,#166518,.F.); +#166829 = ORIENTED_EDGE('',*,*,#166830,.F.); +#166830 = EDGE_CURVE('',#166330,#166511,#166831,.T.); +#166831 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166832,#166833), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166832 = CARTESIAN_POINT('',(1.375,-0.705,0.575)); +#166833 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#166834 = PLANE('',#166835); +#166835 = AXIS2_PLACEMENT_3D('',#166836,#166837,#166838); +#166836 = CARTESIAN_POINT('',(1.375,-0.705,0.775)); +#166837 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#166838 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166839 = ADVANCED_FACE('',(#166840),#166850,.F.); +#166840 = FACE_BOUND('',#166841,.F.); +#166841 = EDGE_LOOP('',(#166842,#166843,#166848,#166849)); +#166842 = ORIENTED_EDGE('',*,*,#166358,.T.); +#166843 = ORIENTED_EDGE('',*,*,#166844,.T.); +#166844 = EDGE_CURVE('',#166352,#166726,#166845,.T.); +#166845 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166846,#166847), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166846 = CARTESIAN_POINT('',(1.375,0.705,0.575)); +#166847 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166848 = ORIENTED_EDGE('',*,*,#166725,.F.); +#166849 = ORIENTED_EDGE('',*,*,#166812,.F.); +#166850 = PLANE('',#166851); +#166851 = AXIS2_PLACEMENT_3D('',#166852,#166853,#166854); +#166852 = CARTESIAN_POINT('',(1.28,0.8,0.775)); +#166853 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166854 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#166855 = ADVANCED_FACE('',(#166856),#166867,.F.); +#166856 = FACE_BOUND('',#166857,.F.); +#166857 = EDGE_LOOP('',(#166858,#166859,#166860,#166866)); +#166858 = ORIENTED_EDGE('',*,*,#166844,.F.); +#166859 = ORIENTED_EDGE('',*,*,#166391,.T.); +#166860 = ORIENTED_EDGE('',*,*,#166861,.T.); +#166861 = EDGE_CURVE('',#166384,#166734,#166862,.T.); +#166862 = LINE('',#166863,#166864); +#166863 = CARTESIAN_POINT('',(1.375,0.325,0.579830288983)); +#166864 = VECTOR('',#166865,1.); +#166865 = DIRECTION('',(0.,0.,1.)); +#166866 = ORIENTED_EDGE('',*,*,#166733,.F.); +#166867 = PLANE('',#166868); +#166868 = AXIS2_PLACEMENT_3D('',#166869,#166870,#166871); +#166869 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166870 = DIRECTION('',(-1.,0.,0.)); +#166871 = DIRECTION('',(0.,-1.,0.)); +#166872 = ADVANCED_FACE('',(#166873),#166900,.F.); +#166873 = FACE_BOUND('',#166874,.F.); +#166874 = EDGE_LOOP('',(#166875,#166876,#166885,#166893)); +#166875 = ORIENTED_EDGE('',*,*,#166383,.T.); +#166876 = ORIENTED_EDGE('',*,*,#166877,.T.); +#166877 = EDGE_CURVE('',#166376,#166878,#166880,.T.); +#166878 = VERTEX_POINT('',#166879); +#166879 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#166880 = CIRCLE('',#166881,0.12); +#166881 = AXIS2_PLACEMENT_3D('',#166882,#166883,#166884); +#166882 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#166883 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#166884 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#166885 = ORIENTED_EDGE('',*,*,#166886,.F.); +#166886 = EDGE_CURVE('',#166887,#166878,#166889,.T.); +#166887 = VERTEX_POINT('',#166888); +#166888 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#166889 = LINE('',#166890,#166891); +#166890 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#166891 = VECTOR('',#166892,1.); +#166892 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#166893 = ORIENTED_EDGE('',*,*,#166894,.F.); +#166894 = EDGE_CURVE('',#166384,#166887,#166895,.T.); +#166895 = CIRCLE('',#166896,0.12); +#166896 = AXIS2_PLACEMENT_3D('',#166897,#166898,#166899); +#166897 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#166898 = DIRECTION('',(2.22044604925E-16,1.,-2.007068112974E-47)); +#166899 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#166900 = CYLINDRICAL_SURFACE('',#166901,0.12); +#166901 = AXIS2_PLACEMENT_3D('',#166902,#166903,#166904); +#166902 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#166903 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#166904 = DIRECTION('',(-9.251858538543E-16,2.054325274013E-31,1.)); +#166905 = ADVANCED_FACE('',(#166906),#166917,.F.); +#166906 = FACE_BOUND('',#166907,.F.); +#166907 = EDGE_LOOP('',(#166908,#166914,#166915,#166916)); +#166908 = ORIENTED_EDGE('',*,*,#166909,.F.); +#166909 = EDGE_CURVE('',#166376,#166503,#166910,.T.); +#166910 = LINE('',#166911,#166912); +#166911 = CARTESIAN_POINT('',(1.375,-0.325,0.579830288983)); +#166912 = VECTOR('',#166913,1.); +#166913 = DIRECTION('',(0.,0.,1.)); +#166914 = ORIENTED_EDGE('',*,*,#166375,.T.); +#166915 = ORIENTED_EDGE('',*,*,#166830,.T.); +#166916 = ORIENTED_EDGE('',*,*,#166510,.F.); +#166917 = PLANE('',#166918); +#166918 = AXIS2_PLACEMENT_3D('',#166919,#166920,#166921); +#166919 = CARTESIAN_POINT('',(1.375,0.705,0.775)); +#166920 = DIRECTION('',(-1.,0.,0.)); +#166921 = DIRECTION('',(0.,-1.,0.)); +#166922 = ADVANCED_FACE('',(#166923),#166939,.F.); +#166923 = FACE_BOUND('',#166924,.F.); +#166924 = EDGE_LOOP('',(#166925,#166926,#166932,#166933)); +#166925 = ORIENTED_EDGE('',*,*,#166741,.F.); +#166926 = ORIENTED_EDGE('',*,*,#166927,.T.); +#166927 = EDGE_CURVE('',#166734,#166503,#166928,.T.); +#166928 = LINE('',#166929,#166930); +#166929 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#166930 = VECTOR('',#166931,1.); +#166931 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#166932 = ORIENTED_EDGE('',*,*,#166502,.T.); +#166933 = ORIENTED_EDGE('',*,*,#166934,.F.); +#166934 = EDGE_CURVE('',#166742,#166495,#166935,.T.); +#166935 = LINE('',#166936,#166937); +#166936 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166937 = VECTOR('',#166938,1.); +#166938 = DIRECTION('',(0.,-1.,0.)); +#166939 = PLANE('',#166940); +#166940 = AXIS2_PLACEMENT_3D('',#166941,#166942,#166943); +#166941 = CARTESIAN_POINT('',(1.375,0.325,0.775)); +#166942 = DIRECTION('',(0.,0.,-1.)); +#166943 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#166944 = ADVANCED_FACE('',(#166945),#166970,.F.); +#166945 = FACE_BOUND('',#166946,.F.); +#166946 = EDGE_LOOP('',(#166947,#166948,#166949,#166950,#166957,#166965) + ); +#166947 = ORIENTED_EDGE('',*,*,#166749,.T.); +#166948 = ORIENTED_EDGE('',*,*,#166934,.T.); +#166949 = ORIENTED_EDGE('',*,*,#166494,.T.); +#166950 = ORIENTED_EDGE('',*,*,#166951,.T.); +#166951 = EDGE_CURVE('',#166487,#166952,#166954,.T.); +#166952 = VERTEX_POINT('',#166953); +#166953 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#166954 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166955,#166956), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166955 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#166956 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#166957 = ORIENTED_EDGE('',*,*,#166958,.F.); +#166958 = EDGE_CURVE('',#166959,#166952,#166961,.T.); +#166959 = VERTEX_POINT('',#166960); +#166960 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#166961 = LINE('',#166962,#166963); +#166962 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#166963 = VECTOR('',#166964,1.); +#166964 = DIRECTION('',(0.,-1.,0.)); +#166965 = ORIENTED_EDGE('',*,*,#166966,.F.); +#166966 = EDGE_CURVE('',#166750,#166959,#166967,.T.); +#166967 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166968,#166969), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166968 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166969 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#166970 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166971,#166972) + ,(#166973,#166974 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#166971 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#166972 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#166973 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#166974 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#166975 = ADVANCED_FACE('',(#166976),#166993,.F.); +#166976 = FACE_BOUND('',#166977,.F.); +#166977 = EDGE_LOOP('',(#166978,#166979,#166986,#166992)); +#166978 = ORIENTED_EDGE('',*,*,#166486,.T.); +#166979 = ORIENTED_EDGE('',*,*,#166980,.T.); +#166980 = EDGE_CURVE('',#166479,#166981,#166983,.T.); +#166981 = VERTEX_POINT('',#166982); +#166982 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#166983 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#166984,#166985), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#166984 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#166985 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#166986 = ORIENTED_EDGE('',*,*,#166987,.F.); +#166987 = EDGE_CURVE('',#166952,#166981,#166988,.T.); +#166988 = LINE('',#166989,#166990); +#166989 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#166990 = VECTOR('',#166991,1.); +#166991 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#166992 = ORIENTED_EDGE('',*,*,#166951,.F.); +#166993 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#166994,#166995) + ,(#166996,#166997 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#166994 = CARTESIAN_POINT('',(1.35,-0.6925,0.775)); +#166995 = CARTESIAN_POINT('',(1.283243103516,-0.659121551758,1.25)); +#166996 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#166997 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#166998 = ADVANCED_FACE('',(#166999),#167016,.F.); +#166999 = FACE_BOUND('',#167000,.F.); +#167000 = EDGE_LOOP('',(#167001,#167002,#167009,#167015)); +#167001 = ORIENTED_EDGE('',*,*,#166478,.T.); +#167002 = ORIENTED_EDGE('',*,*,#167003,.T.); +#167003 = EDGE_CURVE('',#166471,#167004,#167006,.T.); +#167004 = VERTEX_POINT('',#167005); +#167005 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#167006 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167007,#167008), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#167007 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#167008 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#167009 = ORIENTED_EDGE('',*,*,#167010,.F.); +#167010 = EDGE_CURVE('',#166981,#167004,#167011,.T.); +#167011 = LINE('',#167012,#167013); +#167012 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#167013 = VECTOR('',#167014,1.); +#167014 = DIRECTION('',(-1.,0.,0.)); +#167015 = ORIENTED_EDGE('',*,*,#166980,.F.); +#167016 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167017,#167018) + ,(#167019,#167020 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#167017 = CARTESIAN_POINT('',(1.2675,-0.775,0.775)); +#167018 = CARTESIAN_POINT('',(1.234121551758,-0.708243103516,1.25)); +#167019 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#167020 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#167021 = ADVANCED_FACE('',(#167022),#167039,.F.); +#167022 = FACE_BOUND('',#167023,.F.); +#167023 = EDGE_LOOP('',(#167024,#167025,#167032,#167038)); +#167024 = ORIENTED_EDGE('',*,*,#166470,.T.); +#167025 = ORIENTED_EDGE('',*,*,#167026,.T.); +#167026 = EDGE_CURVE('',#166463,#167027,#167029,.T.); +#167027 = VERTEX_POINT('',#167028); +#167028 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167029 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167030,#167031), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#167030 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#167031 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167032 = ORIENTED_EDGE('',*,*,#167033,.F.); +#167033 = EDGE_CURVE('',#167004,#167027,#167034,.T.); +#167034 = LINE('',#167035,#167036); +#167035 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#167036 = VECTOR('',#167037,1.); +#167037 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#167038 = ORIENTED_EDGE('',*,*,#167003,.F.); +#167039 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167040,#167041) + ,(#167042,#167043 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#167040 = CARTESIAN_POINT('',(-1.2675,-0.775,0.775)); +#167041 = CARTESIAN_POINT('',(-1.234121551758,-0.708243103516,1.25)); +#167042 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#167043 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167044 = ADVANCED_FACE('',(#167045),#167069,.F.); +#167045 = FACE_BOUND('',#167046,.F.); +#167046 = EDGE_LOOP('',(#167047,#167048,#167054,#167055,#167062,#167068) + ); +#167047 = ORIENTED_EDGE('',*,*,#166462,.T.); +#167048 = ORIENTED_EDGE('',*,*,#167049,.T.); +#167049 = EDGE_CURVE('',#166455,#166708,#167050,.T.); +#167050 = LINE('',#167051,#167052); +#167051 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#167052 = VECTOR('',#167053,1.); +#167053 = DIRECTION('',(0.,1.,0.)); +#167054 = ORIENTED_EDGE('',*,*,#166781,.T.); +#167055 = ORIENTED_EDGE('',*,*,#167056,.T.); +#167056 = EDGE_CURVE('',#166774,#167057,#167059,.T.); +#167057 = VERTEX_POINT('',#167058); +#167058 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#167059 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167060,#167061), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#167060 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#167061 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#167062 = ORIENTED_EDGE('',*,*,#167063,.F.); +#167063 = EDGE_CURVE('',#167027,#167057,#167064,.T.); +#167064 = LINE('',#167065,#167066); +#167065 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167066 = VECTOR('',#167067,1.); +#167067 = DIRECTION('',(0.,1.,0.)); +#167068 = ORIENTED_EDGE('',*,*,#167026,.F.); +#167069 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167070,#167071) + ,(#167072,#167073 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#167070 = CARTESIAN_POINT('',(-1.35,-0.6925,0.775)); +#167071 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167072 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#167073 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#167074 = ADVANCED_FACE('',(#167075),#167086,.F.); +#167075 = FACE_BOUND('',#167076,.F.); +#167076 = EDGE_LOOP('',(#167077,#167078,#167084,#167085)); +#167077 = ORIENTED_EDGE('',*,*,#166454,.F.); +#167078 = ORIENTED_EDGE('',*,*,#167079,.T.); +#167079 = EDGE_CURVE('',#166174,#166229,#167080,.T.); +#167080 = LINE('',#167081,#167082); +#167081 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#167082 = VECTOR('',#167083,1.); +#167083 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167084 = ORIENTED_EDGE('',*,*,#166707,.T.); +#167085 = ORIENTED_EDGE('',*,*,#167049,.F.); +#167086 = PLANE('',#167087); +#167087 = AXIS2_PLACEMENT_3D('',#167088,#167089,#167090); +#167088 = CARTESIAN_POINT('',(-1.375,-0.325,0.775)); +#167089 = DIRECTION('',(0.,0.,-1.)); +#167090 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#167091 = ADVANCED_FACE('',(#167092),#167103,.T.); +#167092 = FACE_BOUND('',#167093,.T.); +#167093 = EDGE_LOOP('',(#167094,#167095,#167096,#167097)); +#167094 = ORIENTED_EDGE('',*,*,#166600,.T.); +#167095 = ORIENTED_EDGE('',*,*,#167079,.T.); +#167096 = ORIENTED_EDGE('',*,*,#166692,.F.); +#167097 = ORIENTED_EDGE('',*,*,#167098,.F.); +#167098 = EDGE_CURVE('',#166593,#166685,#167099,.T.); +#167099 = LINE('',#167100,#167101); +#167100 = CARTESIAN_POINT('',(-1.690138480964,-0.325,0.510567416853)); +#167101 = VECTOR('',#167102,1.); +#167102 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167103 = CYLINDRICAL_SURFACE('',#167104,0.32); +#167104 = AXIS2_PLACEMENT_3D('',#167105,#167106,#167107); +#167105 = CARTESIAN_POINT('',(-1.375,-0.325,0.455)); +#167106 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#167107 = DIRECTION('',(-0.984807753012,1.093356242223E-16, + 0.173648177667)); +#167108 = ADVANCED_FACE('',(#167109),#167120,.F.); +#167109 = FACE_BOUND('',#167110,.F.); +#167110 = EDGE_LOOP('',(#167111,#167117,#167118,#167119)); +#167111 = ORIENTED_EDGE('',*,*,#167112,.T.); +#167112 = EDGE_CURVE('',#166584,#166676,#167113,.T.); +#167113 = LINE('',#167114,#167115); +#167114 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#167115 = VECTOR('',#167116,1.); +#167116 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167117 = ORIENTED_EDGE('',*,*,#166684,.T.); +#167118 = ORIENTED_EDGE('',*,*,#167098,.F.); +#167119 = ORIENTED_EDGE('',*,*,#166592,.F.); +#167120 = PLANE('',#167121); +#167121 = AXIS2_PLACEMENT_3D('',#167122,#167123,#167124); +#167122 = CARTESIAN_POINT('',(-1.720627212034,-0.325,0.29916221868)); +#167123 = DIRECTION('',(0.989759848633,-1.098854172802E-16, + -0.142742572604)); +#167124 = DIRECTION('',(0.142742572604,-1.584760906992E-17, + 0.989759848633)); +#167125 = ADVANCED_FACE('',(#167126),#167137,.F.); +#167126 = FACE_BOUND('',#167127,.F.); +#167127 = EDGE_LOOP('',(#167128,#167134,#167135,#167136)); +#167128 = ORIENTED_EDGE('',*,*,#167129,.T.); +#167129 = EDGE_CURVE('',#166576,#166668,#167130,.T.); +#167130 = LINE('',#167131,#167132); +#167131 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.2)); +#167132 = VECTOR('',#167133,1.); +#167133 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167134 = ORIENTED_EDGE('',*,*,#166675,.T.); +#167135 = ORIENTED_EDGE('',*,*,#167112,.F.); +#167136 = ORIENTED_EDGE('',*,*,#166583,.F.); +#167137 = CYLINDRICAL_SURFACE('',#167138,0.12); +#167138 = AXIS2_PLACEMENT_3D('',#167139,#167140,#167141); +#167139 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#167140 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#167141 = DIRECTION('',(1.850371707709E-15,-2.054325274013E-31,-1.)); +#167142 = ADVANCED_FACE('',(#167143),#167154,.F.); +#167143 = FACE_BOUND('',#167144,.F.); +#167144 = EDGE_LOOP('',(#167145,#167151,#167152,#167153)); +#167145 = ORIENTED_EDGE('',*,*,#167146,.T.); +#167146 = EDGE_CURVE('',#166568,#166660,#167147,.T.); +#167147 = LINE('',#167148,#167149); +#167148 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#167149 = VECTOR('',#167150,1.); +#167150 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167151 = ORIENTED_EDGE('',*,*,#166667,.T.); +#167152 = ORIENTED_EDGE('',*,*,#167129,.F.); +#167153 = ORIENTED_EDGE('',*,*,#166575,.F.); +#167154 = PLANE('',#167155); +#167155 = AXIS2_PLACEMENT_3D('',#167156,#167157,#167158); +#167156 = CARTESIAN_POINT('',(-1.9,-0.325,0.2)); +#167157 = DIRECTION('',(0.,0.,-1.)); +#167158 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#167159 = ADVANCED_FACE('',(#167160),#167171,.F.); +#167160 = FACE_BOUND('',#167161,.F.); +#167161 = EDGE_LOOP('',(#167162,#167168,#167169,#167170)); +#167162 = ORIENTED_EDGE('',*,*,#167163,.T.); +#167163 = EDGE_CURVE('',#166560,#166652,#167164,.T.); +#167164 = LINE('',#167165,#167166); +#167165 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#167166 = VECTOR('',#167167,1.); +#167167 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167168 = ORIENTED_EDGE('',*,*,#166659,.T.); +#167169 = ORIENTED_EDGE('',*,*,#167146,.F.); +#167170 = ORIENTED_EDGE('',*,*,#166567,.F.); +#167171 = PLANE('',#167172); +#167172 = AXIS2_PLACEMENT_3D('',#167173,#167174,#167175); +#167173 = CARTESIAN_POINT('',(-1.9,-0.325,-5.551115123126E-17)); +#167174 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#167175 = DIRECTION('',(0.,0.,1.)); +#167176 = ADVANCED_FACE('',(#167177),#167188,.F.); +#167177 = FACE_BOUND('',#167178,.F.); +#167178 = EDGE_LOOP('',(#167179,#167185,#167186,#167187)); +#167179 = ORIENTED_EDGE('',*,*,#167180,.T.); +#167180 = EDGE_CURVE('',#166551,#166643,#167181,.T.); +#167181 = LINE('',#167182,#167183); +#167182 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#167183 = VECTOR('',#167184,1.); +#167184 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#167185 = ORIENTED_EDGE('',*,*,#166651,.T.); +#167186 = ORIENTED_EDGE('',*,*,#167163,.F.); +#167187 = ORIENTED_EDGE('',*,*,#166559,.F.); +#167188 = PLANE('',#167189); +#167189 = AXIS2_PLACEMENT_3D('',#167190,#167191,#167192); +#167190 = CARTESIAN_POINT('',(-1.838804142396,-0.325,-5.551115123126E-17 + )); +#167191 = DIRECTION('',(0.,0.,1.)); +#167192 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#167193 = ADVANCED_FACE('',(#167194),#167200,.T.); +#167194 = FACE_BOUND('',#167195,.T.); +#167195 = EDGE_LOOP('',(#167196,#167197,#167198,#167199)); +#167196 = ORIENTED_EDGE('',*,*,#166550,.T.); +#167197 = ORIENTED_EDGE('',*,*,#167180,.T.); +#167198 = ORIENTED_EDGE('',*,*,#166642,.F.); +#167199 = ORIENTED_EDGE('',*,*,#166624,.F.); +#167200 = CYLINDRICAL_SURFACE('',#167201,0.32); +#167201 = AXIS2_PLACEMENT_3D('',#167202,#167203,#167204); +#167202 = CARTESIAN_POINT('',(-1.838804142396,-0.325,0.32)); +#167203 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#167204 = DIRECTION('',(0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#167205 = ADVANCED_FACE('',(#167206),#167223,.F.); +#167206 = FACE_BOUND('',#167207,.F.); +#167207 = EDGE_LOOP('',(#167208,#167209,#167216,#167222)); +#167208 = ORIENTED_EDGE('',*,*,#166773,.T.); +#167209 = ORIENTED_EDGE('',*,*,#167210,.T.); +#167210 = EDGE_CURVE('',#166766,#167211,#167213,.T.); +#167211 = VERTEX_POINT('',#167212); +#167212 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#167213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167214,#167215), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#167214 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#167215 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#167216 = ORIENTED_EDGE('',*,*,#167217,.F.); +#167217 = EDGE_CURVE('',#167057,#167211,#167218,.T.); +#167218 = LINE('',#167219,#167220); +#167219 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#167220 = VECTOR('',#167221,1.); +#167221 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#167222 = ORIENTED_EDGE('',*,*,#167056,.F.); +#167223 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167224,#167225) + ,(#167226,#167227 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#167224 = CARTESIAN_POINT('',(-1.35,0.6925,0.775)); +#167225 = CARTESIAN_POINT('',(-1.283243103516,0.659121551758,1.25)); +#167226 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#167227 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#167228 = ADVANCED_FACE('',(#167229),#167246,.F.); +#167229 = FACE_BOUND('',#167230,.F.); +#167230 = EDGE_LOOP('',(#167231,#167232,#167239,#167245)); +#167231 = ORIENTED_EDGE('',*,*,#166765,.T.); +#167232 = ORIENTED_EDGE('',*,*,#167233,.T.); +#167233 = EDGE_CURVE('',#166758,#167234,#167236,.T.); +#167234 = VERTEX_POINT('',#167235); +#167235 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#167236 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167237,#167238), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#167237 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#167238 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#167239 = ORIENTED_EDGE('',*,*,#167240,.F.); +#167240 = EDGE_CURVE('',#167211,#167234,#167241,.T.); +#167241 = LINE('',#167242,#167243); +#167242 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#167243 = VECTOR('',#167244,1.); +#167244 = DIRECTION('',(1.,0.,0.)); +#167245 = ORIENTED_EDGE('',*,*,#167210,.F.); +#167246 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167247,#167248) + ,(#167249,#167250 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.535),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#167247 = CARTESIAN_POINT('',(-1.2675,0.775,0.775)); +#167248 = CARTESIAN_POINT('',(-1.234121551758,0.708243103516,1.25)); +#167249 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#167250 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#167251 = ADVANCED_FACE('',(#167252),#167263,.F.); +#167252 = FACE_BOUND('',#167253,.F.); +#167253 = EDGE_LOOP('',(#167254,#167255,#167256,#167262)); +#167254 = ORIENTED_EDGE('',*,*,#166757,.T.); +#167255 = ORIENTED_EDGE('',*,*,#166966,.T.); +#167256 = ORIENTED_EDGE('',*,*,#167257,.F.); +#167257 = EDGE_CURVE('',#167234,#166959,#167258,.T.); +#167258 = LINE('',#167259,#167260); +#167259 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#167260 = VECTOR('',#167261,1.); +#167261 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#167262 = ORIENTED_EDGE('',*,*,#167233,.F.); +#167263 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#167264,#167265) + ,(#167266,#167267 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#167264 = CARTESIAN_POINT('',(1.2675,0.775,0.775)); +#167265 = CARTESIAN_POINT('',(1.234121551758,0.708243103516,1.25)); +#167266 = CARTESIAN_POINT('',(1.35,0.6925,0.775)); +#167267 = CARTESIAN_POINT('',(1.283243103516,0.659121551758,1.25)); +#167268 = ADVANCED_FACE('',(#167269),#167338,.F.); +#167269 = FACE_BOUND('',#167270,.F.); +#167270 = EDGE_LOOP('',(#167271,#167272,#167273,#167281,#167290,#167298, + #167306,#167314,#167323,#167331)); +#167271 = ORIENTED_EDGE('',*,*,#166861,.F.); +#167272 = ORIENTED_EDGE('',*,*,#166894,.T.); +#167273 = ORIENTED_EDGE('',*,*,#167274,.T.); +#167274 = EDGE_CURVE('',#166887,#167275,#167277,.T.); +#167275 = VERTEX_POINT('',#167276); +#167276 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#167277 = LINE('',#167278,#167279); +#167278 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#167279 = VECTOR('',#167280,1.); +#167280 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#167281 = ORIENTED_EDGE('',*,*,#167282,.T.); +#167282 = EDGE_CURVE('',#167275,#167283,#167285,.T.); +#167283 = VERTEX_POINT('',#167284); +#167284 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#167285 = CIRCLE('',#167286,0.32); +#167286 = AXIS2_PLACEMENT_3D('',#167287,#167288,#167289); +#167287 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#167288 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#167289 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#167290 = ORIENTED_EDGE('',*,*,#167291,.T.); +#167291 = EDGE_CURVE('',#167283,#167292,#167294,.T.); +#167292 = VERTEX_POINT('',#167293); +#167293 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#167294 = LINE('',#167295,#167296); +#167295 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#167296 = VECTOR('',#167297,1.); +#167297 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#167298 = ORIENTED_EDGE('',*,*,#167299,.T.); +#167299 = EDGE_CURVE('',#167292,#167300,#167302,.T.); +#167300 = VERTEX_POINT('',#167301); +#167301 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#167302 = LINE('',#167303,#167304); +#167303 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#167304 = VECTOR('',#167305,1.); +#167305 = DIRECTION('',(0.,0.,1.)); +#167306 = ORIENTED_EDGE('',*,*,#167307,.T.); +#167307 = EDGE_CURVE('',#167300,#167308,#167310,.T.); +#167308 = VERTEX_POINT('',#167309); +#167309 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#167310 = LINE('',#167311,#167312); +#167311 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#167312 = VECTOR('',#167313,1.); +#167313 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#167314 = ORIENTED_EDGE('',*,*,#167315,.T.); +#167315 = EDGE_CURVE('',#167308,#167316,#167318,.T.); +#167316 = VERTEX_POINT('',#167317); +#167317 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#167318 = CIRCLE('',#167319,0.12); +#167319 = AXIS2_PLACEMENT_3D('',#167320,#167321,#167322); +#167320 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#167321 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#167322 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#167323 = ORIENTED_EDGE('',*,*,#167324,.T.); +#167324 = EDGE_CURVE('',#167316,#167325,#167327,.T.); +#167325 = VERTEX_POINT('',#167326); +#167326 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#167327 = LINE('',#167328,#167329); +#167328 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#167329 = VECTOR('',#167330,1.); +#167330 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#167331 = ORIENTED_EDGE('',*,*,#167332,.T.); +#167332 = EDGE_CURVE('',#167325,#166734,#167333,.T.); +#167333 = CIRCLE('',#167334,0.32); +#167334 = AXIS2_PLACEMENT_3D('',#167335,#167336,#167337); +#167335 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#167336 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#167337 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#167338 = PLANE('',#167339); +#167339 = AXIS2_PLACEMENT_3D('',#167340,#167341,#167342); +#167340 = CARTESIAN_POINT('',(1.610729118287,0.325,0.384660577966)); +#167341 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167342 = DIRECTION('',(0.,0.,1.)); +#167343 = ADVANCED_FACE('',(#167344),#167362,.F.); +#167344 = FACE_BOUND('',#167345,.F.); +#167345 = EDGE_LOOP('',(#167346,#167347,#167355,#167361)); +#167346 = ORIENTED_EDGE('',*,*,#166886,.T.); +#167347 = ORIENTED_EDGE('',*,*,#167348,.T.); +#167348 = EDGE_CURVE('',#166878,#167349,#167351,.T.); +#167349 = VERTEX_POINT('',#167350); +#167350 = CARTESIAN_POINT('',(1.523665661432,-0.325,0.264432583147)); +#167351 = LINE('',#167352,#167353); +#167352 = CARTESIAN_POINT('',(1.493176930361,-0.325,0.47583778132)); +#167353 = VECTOR('',#167354,1.); +#167354 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#167355 = ORIENTED_EDGE('',*,*,#167356,.F.); +#167356 = EDGE_CURVE('',#167275,#167349,#167357,.T.); +#167357 = LINE('',#167358,#167359); +#167358 = CARTESIAN_POINT('',(1.523665661432,0.325,0.264432583147)); +#167359 = VECTOR('',#167360,1.); +#167360 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167361 = ORIENTED_EDGE('',*,*,#167274,.F.); +#167362 = PLANE('',#167363); +#167363 = AXIS2_PLACEMENT_3D('',#167364,#167365,#167366); +#167364 = CARTESIAN_POINT('',(1.493176930361,0.325,0.47583778132)); +#167365 = DIRECTION('',(0.989759848633,-2.197708345604E-16, + 0.142742572604)); +#167366 = DIRECTION('',(0.142742572604,-3.169521813984E-17, + -0.989759848633)); +#167367 = ADVANCED_FACE('',(#167368),#167430,.T.); +#167368 = FACE_BOUND('',#167369,.T.); +#167369 = EDGE_LOOP('',(#167370,#167371,#167372,#167373,#167382,#167390, + #167398,#167406,#167415,#167423)); +#167370 = ORIENTED_EDGE('',*,*,#166909,.F.); +#167371 = ORIENTED_EDGE('',*,*,#166877,.T.); +#167372 = ORIENTED_EDGE('',*,*,#167348,.T.); +#167373 = ORIENTED_EDGE('',*,*,#167374,.T.); +#167374 = EDGE_CURVE('',#167349,#167375,#167377,.T.); +#167375 = VERTEX_POINT('',#167376); +#167376 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#167377 = CIRCLE('',#167378,0.32); +#167378 = AXIS2_PLACEMENT_3D('',#167379,#167380,#167381); +#167379 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#167380 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#167381 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#167382 = ORIENTED_EDGE('',*,*,#167383,.T.); +#167383 = EDGE_CURVE('',#167375,#167384,#167386,.T.); +#167384 = VERTEX_POINT('',#167385); +#167385 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#167386 = LINE('',#167387,#167388); +#167387 = CARTESIAN_POINT('',(1.838804142396,-0.325,-5.551115123126E-17) + ); +#167388 = VECTOR('',#167389,1.); +#167389 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#167390 = ORIENTED_EDGE('',*,*,#167391,.T.); +#167391 = EDGE_CURVE('',#167384,#167392,#167394,.T.); +#167392 = VERTEX_POINT('',#167393); +#167393 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#167394 = LINE('',#167395,#167396); +#167395 = CARTESIAN_POINT('',(1.9,-0.325,-5.551115123126E-17)); +#167396 = VECTOR('',#167397,1.); +#167397 = DIRECTION('',(0.,0.,1.)); +#167398 = ORIENTED_EDGE('',*,*,#167399,.T.); +#167399 = EDGE_CURVE('',#167392,#167400,#167402,.T.); +#167400 = VERTEX_POINT('',#167401); +#167401 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.2)); +#167402 = LINE('',#167403,#167404); +#167403 = CARTESIAN_POINT('',(1.9,-0.325,0.2)); +#167404 = VECTOR('',#167405,1.); +#167405 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#167406 = ORIENTED_EDGE('',*,*,#167407,.T.); +#167407 = EDGE_CURVE('',#167400,#167408,#167410,.T.); +#167408 = VERTEX_POINT('',#167409); +#167409 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#167410 = CIRCLE('',#167411,0.12); +#167411 = AXIS2_PLACEMENT_3D('',#167412,#167413,#167414); +#167412 = CARTESIAN_POINT('',(1.838804142396,-0.325,0.32)); +#167413 = DIRECTION('',(2.22044604925E-16,1.,4.0141362272E-47)); +#167414 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#167415 = ORIENTED_EDGE('',*,*,#167416,.T.); +#167416 = EDGE_CURVE('',#167408,#167417,#167419,.T.); +#167417 = VERTEX_POINT('',#167418); +#167418 = CARTESIAN_POINT('',(1.690138480964,-0.325,0.510567416853)); +#167419 = LINE('',#167420,#167421); +#167420 = CARTESIAN_POINT('',(1.720627212034,-0.325,0.29916221868)); +#167421 = VECTOR('',#167422,1.); +#167422 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#167423 = ORIENTED_EDGE('',*,*,#167424,.T.); +#167424 = EDGE_CURVE('',#167417,#166503,#167425,.T.); +#167425 = CIRCLE('',#167426,0.32); +#167426 = AXIS2_PLACEMENT_3D('',#167427,#167428,#167429); +#167427 = CARTESIAN_POINT('',(1.375,-0.325,0.455)); +#167428 = DIRECTION('',(-2.22044604925E-16,-1.,1.251126945016E-33)); +#167429 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#167430 = PLANE('',#167431); +#167431 = AXIS2_PLACEMENT_3D('',#167432,#167433,#167434); +#167432 = CARTESIAN_POINT('',(1.610729118287,-0.325,0.384660577966)); +#167433 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167434 = DIRECTION('',(0.,0.,1.)); +#167435 = ADVANCED_FACE('',(#167436),#167447,.T.); +#167436 = FACE_BOUND('',#167437,.T.); +#167437 = EDGE_LOOP('',(#167438,#167439,#167440,#167441)); +#167438 = ORIENTED_EDGE('',*,*,#167332,.T.); +#167439 = ORIENTED_EDGE('',*,*,#166927,.T.); +#167440 = ORIENTED_EDGE('',*,*,#167424,.F.); +#167441 = ORIENTED_EDGE('',*,*,#167442,.F.); +#167442 = EDGE_CURVE('',#167325,#167417,#167443,.T.); +#167443 = LINE('',#167444,#167445); +#167444 = CARTESIAN_POINT('',(1.690138480964,0.325,0.510567416853)); +#167445 = VECTOR('',#167446,1.); +#167446 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167447 = CYLINDRICAL_SURFACE('',#167448,0.32); +#167448 = AXIS2_PLACEMENT_3D('',#167449,#167450,#167451); +#167449 = CARTESIAN_POINT('',(1.375,0.325,0.455)); +#167450 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#167451 = DIRECTION('',(0.984807753012,-2.186712484447E-16, + 0.173648177667)); +#167452 = ADVANCED_FACE('',(#167453,#167463),#167497,.T.); +#167453 = FACE_BOUND('',#167454,.T.); +#167454 = EDGE_LOOP('',(#167455,#167456,#167457,#167458,#167459,#167460, + #167461,#167462)); +#167455 = ORIENTED_EDGE('',*,*,#167063,.F.); +#167456 = ORIENTED_EDGE('',*,*,#167033,.F.); +#167457 = ORIENTED_EDGE('',*,*,#167010,.F.); +#167458 = ORIENTED_EDGE('',*,*,#166987,.F.); +#167459 = ORIENTED_EDGE('',*,*,#166958,.F.); +#167460 = ORIENTED_EDGE('',*,*,#167257,.F.); +#167461 = ORIENTED_EDGE('',*,*,#167240,.F.); +#167462 = ORIENTED_EDGE('',*,*,#167217,.F.); +#167463 = FACE_BOUND('',#167464,.T.); +#167464 = EDGE_LOOP('',(#167465,#167475,#167483,#167491)); +#167465 = ORIENTED_EDGE('',*,*,#167466,.T.); +#167466 = EDGE_CURVE('',#167467,#167469,#167471,.T.); +#167467 = VERTEX_POINT('',#167468); +#167468 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.25)); +#167469 = VERTEX_POINT('',#167470); +#167470 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.25)); +#167471 = LINE('',#167472,#167473); +#167472 = CARTESIAN_POINT('',(-1.233243103516,-0.608243103516,1.25)); +#167473 = VECTOR('',#167474,1.); +#167474 = DIRECTION('',(-1.,0.,0.)); +#167475 = ORIENTED_EDGE('',*,*,#167476,.T.); +#167476 = EDGE_CURVE('',#167469,#167477,#167479,.T.); +#167477 = VERTEX_POINT('',#167478); +#167478 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.25)); +#167479 = LINE('',#167480,#167481); +#167480 = CARTESIAN_POINT('',(-1.183243103516,-0.633682327637,1.25)); +#167481 = VECTOR('',#167482,1.); +#167482 = DIRECTION('',(0.,1.,0.)); +#167483 = ORIENTED_EDGE('',*,*,#167484,.F.); +#167484 = EDGE_CURVE('',#167485,#167477,#167487,.T.); +#167485 = VERTEX_POINT('',#167486); +#167486 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.25)); +#167487 = LINE('',#167488,#167489); +#167488 = CARTESIAN_POINT('',(-1.233243103516,0.608243103516,1.25)); +#167489 = VECTOR('',#167490,1.); +#167490 = DIRECTION('',(-1.,0.,0.)); +#167491 = ORIENTED_EDGE('',*,*,#167492,.F.); +#167492 = EDGE_CURVE('',#167467,#167485,#167493,.T.); +#167493 = LINE('',#167494,#167495); +#167494 = CARTESIAN_POINT('',(-0.683243103516,-0.633682327637,1.25)); +#167495 = VECTOR('',#167496,1.); +#167496 = DIRECTION('',(0.,1.,0.)); +#167497 = PLANE('',#167498); +#167498 = AXIS2_PLACEMENT_3D('',#167499,#167500,#167501); +#167499 = CARTESIAN_POINT('',(-1.283243103516,-0.659121551758,1.25)); +#167500 = DIRECTION('',(0.,0.,1.)); +#167501 = DIRECTION('',(0.889522261294,0.456891832562,-0.)); +#167502 = ADVANCED_FACE('',(#167503),#167514,.F.); +#167503 = FACE_BOUND('',#167504,.F.); +#167504 = EDGE_LOOP('',(#167505,#167511,#167512,#167513)); +#167505 = ORIENTED_EDGE('',*,*,#167506,.T.); +#167506 = EDGE_CURVE('',#167316,#167408,#167507,.T.); +#167507 = LINE('',#167508,#167509); +#167508 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#167509 = VECTOR('',#167510,1.); +#167510 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167511 = ORIENTED_EDGE('',*,*,#167416,.T.); +#167512 = ORIENTED_EDGE('',*,*,#167442,.F.); +#167513 = ORIENTED_EDGE('',*,*,#167324,.F.); +#167514 = PLANE('',#167515); +#167515 = AXIS2_PLACEMENT_3D('',#167516,#167517,#167518); +#167516 = CARTESIAN_POINT('',(1.720627212034,0.325,0.29916221868)); +#167517 = DIRECTION('',(-0.989759848633,2.197708345604E-16, + -0.142742572604)); +#167518 = DIRECTION('',(-0.142742572604,3.169521813984E-17, + 0.989759848633)); +#167519 = ADVANCED_FACE('',(#167520),#167531,.F.); +#167520 = FACE_BOUND('',#167521,.F.); +#167521 = EDGE_LOOP('',(#167522,#167528,#167529,#167530)); +#167522 = ORIENTED_EDGE('',*,*,#167523,.T.); +#167523 = EDGE_CURVE('',#167308,#167400,#167524,.T.); +#167524 = LINE('',#167525,#167526); +#167525 = CARTESIAN_POINT('',(1.838804142396,0.325,0.2)); +#167526 = VECTOR('',#167527,1.); +#167527 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167528 = ORIENTED_EDGE('',*,*,#167407,.T.); +#167529 = ORIENTED_EDGE('',*,*,#167506,.F.); +#167530 = ORIENTED_EDGE('',*,*,#167315,.F.); +#167531 = CYLINDRICAL_SURFACE('',#167532,0.12); +#167532 = AXIS2_PLACEMENT_3D('',#167533,#167534,#167535); +#167533 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#167534 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#167535 = DIRECTION('',(-1.850371707709E-15,4.108650548026E-31,-1.)); +#167536 = ADVANCED_FACE('',(#167537),#167548,.F.); +#167537 = FACE_BOUND('',#167538,.F.); +#167538 = EDGE_LOOP('',(#167539,#167545,#167546,#167547)); +#167539 = ORIENTED_EDGE('',*,*,#167540,.T.); +#167540 = EDGE_CURVE('',#167300,#167392,#167541,.T.); +#167541 = LINE('',#167542,#167543); +#167542 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#167543 = VECTOR('',#167544,1.); +#167544 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167545 = ORIENTED_EDGE('',*,*,#167399,.T.); +#167546 = ORIENTED_EDGE('',*,*,#167523,.F.); +#167547 = ORIENTED_EDGE('',*,*,#167307,.F.); +#167548 = PLANE('',#167549); +#167549 = AXIS2_PLACEMENT_3D('',#167550,#167551,#167552); +#167550 = CARTESIAN_POINT('',(1.9,0.325,0.2)); +#167551 = DIRECTION('',(0.,0.,-1.)); +#167552 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#167553 = ADVANCED_FACE('',(#167554),#167565,.F.); +#167554 = FACE_BOUND('',#167555,.F.); +#167555 = EDGE_LOOP('',(#167556,#167562,#167563,#167564)); +#167556 = ORIENTED_EDGE('',*,*,#167557,.T.); +#167557 = EDGE_CURVE('',#167292,#167384,#167558,.T.); +#167558 = LINE('',#167559,#167560); +#167559 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#167560 = VECTOR('',#167561,1.); +#167561 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167562 = ORIENTED_EDGE('',*,*,#167391,.T.); +#167563 = ORIENTED_EDGE('',*,*,#167540,.F.); +#167564 = ORIENTED_EDGE('',*,*,#167299,.F.); +#167565 = PLANE('',#167566); +#167566 = AXIS2_PLACEMENT_3D('',#167567,#167568,#167569); +#167567 = CARTESIAN_POINT('',(1.9,0.325,-5.551115123126E-17)); +#167568 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#167569 = DIRECTION('',(0.,0.,1.)); +#167570 = ADVANCED_FACE('',(#167571),#167582,.F.); +#167571 = FACE_BOUND('',#167572,.F.); +#167572 = EDGE_LOOP('',(#167573,#167579,#167580,#167581)); +#167573 = ORIENTED_EDGE('',*,*,#167574,.T.); +#167574 = EDGE_CURVE('',#167283,#167375,#167575,.T.); +#167575 = LINE('',#167576,#167577); +#167576 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#167577 = VECTOR('',#167578,1.); +#167578 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167579 = ORIENTED_EDGE('',*,*,#167383,.T.); +#167580 = ORIENTED_EDGE('',*,*,#167557,.F.); +#167581 = ORIENTED_EDGE('',*,*,#167291,.F.); +#167582 = PLANE('',#167583); +#167583 = AXIS2_PLACEMENT_3D('',#167584,#167585,#167586); +#167584 = CARTESIAN_POINT('',(1.838804142396,0.325,-5.551115123126E-17) + ); +#167585 = DIRECTION('',(0.,0.,1.)); +#167586 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#167587 = ADVANCED_FACE('',(#167588),#167594,.T.); +#167588 = FACE_BOUND('',#167589,.T.); +#167589 = EDGE_LOOP('',(#167590,#167591,#167592,#167593)); +#167590 = ORIENTED_EDGE('',*,*,#167282,.T.); +#167591 = ORIENTED_EDGE('',*,*,#167574,.T.); +#167592 = ORIENTED_EDGE('',*,*,#167374,.F.); +#167593 = ORIENTED_EDGE('',*,*,#167356,.F.); +#167594 = CYLINDRICAL_SURFACE('',#167595,0.32); +#167595 = AXIS2_PLACEMENT_3D('',#167596,#167597,#167598); +#167596 = CARTESIAN_POINT('',(1.838804142396,0.325,0.32)); +#167597 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#167598 = DIRECTION('',(-0.984807753012,2.186712484447E-16, + -0.173648177667)); +#167599 = ADVANCED_FACE('',(#167600),#167625,.F.); +#167600 = FACE_BOUND('',#167601,.F.); +#167601 = EDGE_LOOP('',(#167602,#167603,#167611,#167619)); +#167602 = ORIENTED_EDGE('',*,*,#167466,.T.); +#167603 = ORIENTED_EDGE('',*,*,#167604,.T.); +#167604 = EDGE_CURVE('',#167469,#167605,#167607,.T.); +#167605 = VERTEX_POINT('',#167606); +#167606 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#167607 = LINE('',#167608,#167609); +#167608 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#167609 = VECTOR('',#167610,1.); +#167610 = DIRECTION('',(0.,0.,1.)); +#167611 = ORIENTED_EDGE('',*,*,#167612,.T.); +#167612 = EDGE_CURVE('',#167605,#167613,#167615,.T.); +#167613 = VERTEX_POINT('',#167614); +#167614 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#167615 = LINE('',#167616,#167617); +#167616 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#167617 = VECTOR('',#167618,1.); +#167618 = DIRECTION('',(1.,0.,0.)); +#167619 = ORIENTED_EDGE('',*,*,#167620,.F.); +#167620 = EDGE_CURVE('',#167467,#167613,#167621,.T.); +#167621 = LINE('',#167622,#167623); +#167622 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#167623 = VECTOR('',#167624,1.); +#167624 = DIRECTION('',(0.,0.,1.)); +#167625 = PLANE('',#167626); +#167626 = AXIS2_PLACEMENT_3D('',#167627,#167628,#167629); +#167627 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#167628 = DIRECTION('',(0.,1.,0.)); +#167629 = DIRECTION('',(0.,-0.,1.)); +#167630 = ADVANCED_FACE('',(#167631),#167649,.T.); +#167631 = FACE_BOUND('',#167632,.T.); +#167632 = EDGE_LOOP('',(#167633,#167634,#167635,#167643)); +#167633 = ORIENTED_EDGE('',*,*,#167620,.F.); +#167634 = ORIENTED_EDGE('',*,*,#167492,.T.); +#167635 = ORIENTED_EDGE('',*,*,#167636,.T.); +#167636 = EDGE_CURVE('',#167485,#167637,#167639,.T.); +#167637 = VERTEX_POINT('',#167638); +#167638 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.26)); +#167639 = LINE('',#167640,#167641); +#167640 = CARTESIAN_POINT('',(-0.683243103516,0.608243103516,1.24)); +#167641 = VECTOR('',#167642,1.); +#167642 = DIRECTION('',(0.,0.,1.)); +#167643 = ORIENTED_EDGE('',*,*,#167644,.F.); +#167644 = EDGE_CURVE('',#167613,#167637,#167645,.T.); +#167645 = LINE('',#167646,#167647); +#167646 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.26)); +#167647 = VECTOR('',#167648,1.); +#167648 = DIRECTION('',(0.,1.,0.)); +#167649 = PLANE('',#167650); +#167650 = AXIS2_PLACEMENT_3D('',#167651,#167652,#167653); +#167651 = CARTESIAN_POINT('',(-0.683243103516,-0.608243103516,1.24)); +#167652 = DIRECTION('',(1.,0.,0.)); +#167653 = DIRECTION('',(0.,0.,1.)); +#167654 = ADVANCED_FACE('',(#167655),#167673,.T.); +#167655 = FACE_BOUND('',#167656,.T.); +#167656 = EDGE_LOOP('',(#167657,#167658,#167666,#167672)); +#167657 = ORIENTED_EDGE('',*,*,#167484,.T.); +#167658 = ORIENTED_EDGE('',*,*,#167659,.T.); +#167659 = EDGE_CURVE('',#167477,#167660,#167662,.T.); +#167660 = VERTEX_POINT('',#167661); +#167661 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#167662 = LINE('',#167663,#167664); +#167663 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#167664 = VECTOR('',#167665,1.); +#167665 = DIRECTION('',(0.,0.,1.)); +#167666 = ORIENTED_EDGE('',*,*,#167667,.T.); +#167667 = EDGE_CURVE('',#167660,#167637,#167668,.T.); +#167668 = LINE('',#167669,#167670); +#167669 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.26)); +#167670 = VECTOR('',#167671,1.); +#167671 = DIRECTION('',(1.,0.,0.)); +#167672 = ORIENTED_EDGE('',*,*,#167636,.F.); +#167673 = PLANE('',#167674); +#167674 = AXIS2_PLACEMENT_3D('',#167675,#167676,#167677); +#167675 = CARTESIAN_POINT('',(-1.183243103516,0.608243103516,1.24)); +#167676 = DIRECTION('',(0.,1.,0.)); +#167677 = DIRECTION('',(0.,-0.,1.)); +#167678 = ADVANCED_FACE('',(#167679),#167690,.F.); +#167679 = FACE_BOUND('',#167680,.F.); +#167680 = EDGE_LOOP('',(#167681,#167682,#167683,#167684)); +#167681 = ORIENTED_EDGE('',*,*,#167604,.F.); +#167682 = ORIENTED_EDGE('',*,*,#167476,.T.); +#167683 = ORIENTED_EDGE('',*,*,#167659,.T.); +#167684 = ORIENTED_EDGE('',*,*,#167685,.F.); +#167685 = EDGE_CURVE('',#167605,#167660,#167686,.T.); +#167686 = LINE('',#167687,#167688); +#167687 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#167688 = VECTOR('',#167689,1.); +#167689 = DIRECTION('',(0.,1.,0.)); +#167690 = PLANE('',#167691); +#167691 = AXIS2_PLACEMENT_3D('',#167692,#167693,#167694); +#167692 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.24)); +#167693 = DIRECTION('',(1.,0.,0.)); +#167694 = DIRECTION('',(0.,0.,1.)); +#167695 = ADVANCED_FACE('',(#167696),#167702,.T.); +#167696 = FACE_BOUND('',#167697,.T.); +#167697 = EDGE_LOOP('',(#167698,#167699,#167700,#167701)); +#167698 = ORIENTED_EDGE('',*,*,#167685,.F.); +#167699 = ORIENTED_EDGE('',*,*,#167612,.T.); +#167700 = ORIENTED_EDGE('',*,*,#167644,.T.); +#167701 = ORIENTED_EDGE('',*,*,#167667,.F.); +#167702 = PLANE('',#167703); +#167703 = AXIS2_PLACEMENT_3D('',#167704,#167705,#167706); +#167704 = CARTESIAN_POINT('',(-1.183243103516,-0.608243103516,1.26)); +#167705 = DIRECTION('',(0.,0.,1.)); +#167706 = DIRECTION('',(1.,0.,-0.)); +#167707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#167711)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#167708,#167709,#167710)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#167708 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#167709 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#167710 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#167711 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#167708, + 'distance_accuracy_value','confusion accuracy'); +#167712 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#167713,#167715); +#167713 = ( REPRESENTATION_RELATIONSHIP('','',#166018,#165995) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#167714) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#167714 = ITEM_DEFINED_TRANSFORMATION('','',#11,#165996); +#167715 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #167716); +#167716 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('78','=>[0:1:1:42]','',#165990, + #166013,$); +#167717 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#166015)); +#167718 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#167719,#167721); +#167719 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#167720) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#167720 = ITEM_DEFINED_TRANSFORMATION('','',#11,#243); +#167721 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #167722); +#167722 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('80','R_PWR_EN_PD1','',#5, + #31605,$); +#167723 = SHAPE_DEFINITION_REPRESENTATION(#167724,#167730); +#167724 = PRODUCT_DEFINITION_SHAPE('','',#167725); +#167725 = PRODUCT_DEFINITION('design','',#167726,#167729); +#167726 = PRODUCT_DEFINITION_FORMATION('','',#167727); +#167727 = PRODUCT('LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y', + 'LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y','',(#167728)); +#167728 = PRODUCT_CONTEXT('',#2,'mechanical'); +#167729 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#167730 = SHAPE_REPRESENTATION('',(#11,#167731),#167735); +#167731 = AXIS2_PLACEMENT_3D('',#167732,#167733,#167734); +#167732 = CARTESIAN_POINT('',(0.,0.,0.)); +#167733 = DIRECTION('',(0.,0.,1.)); +#167734 = DIRECTION('',(1.,0.,-0.)); +#167735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#167739)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#167736,#167737,#167738)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#167736 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#167737 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#167738 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#167739 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#167736, + 'distance_accuracy_value','confusion accuracy'); +#167740 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#167741,#167743); +#167741 = ( REPRESENTATION_RELATIONSHIP('','',#167730,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#167742) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#167742 = ITEM_DEFINED_TRANSFORMATION('','',#11,#247); +#167743 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #167744); +#167744 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('82','U_IMU1','',#5,#167725,$); +#167745 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#167727)); +#167746 = SHAPE_DEFINITION_REPRESENTATION(#167747,#167753); +#167747 = PRODUCT_DEFINITION_SHAPE('','',#167748); +#167748 = PRODUCT_DEFINITION('design','',#167749,#167752); +#167749 = PRODUCT_DEFINITION_FORMATION('','',#167750); +#167750 = PRODUCT('LGA_14_3x25mm_P05mm_LayoutBorder3x4y', + 'LGA_14_3x25mm_P05mm_LayoutBorder3x4y','',(#167751)); +#167751 = PRODUCT_CONTEXT('',#2,'mechanical'); +#167752 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#167753 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#167754),#169937); +#167754 = MANIFOLD_SOLID_BREP('',#167755); +#167755 = CLOSED_SHELL('',(#167756,#167796,#167827,#167851,#167875, + #167892,#168380,#168411,#168435,#168459,#168476,#168507,#168531, + #168555,#168572,#168603,#168627,#168651,#168668,#168699,#168723, + #168747,#168764,#168795,#168819,#168843,#168860,#168891,#168915, + #168939,#168956,#168987,#169011,#169035,#169052,#169083,#169107, + #169131,#169148,#169179,#169203,#169227,#169244,#169275,#169299, + #169323,#169340,#169371,#169395,#169419,#169436,#169467,#169491, + #169515,#169532,#169563,#169587,#169611,#169628,#169659,#169683, + #169707,#169724,#169747,#169759,#169771,#169783,#169795,#169807, + #169819,#169831,#169843,#169855,#169867,#169879,#169891,#169903, + #169928)); +#167756 = ADVANCED_FACE('',(#167757),#167791,.F.); +#167757 = FACE_BOUND('',#167758,.F.); +#167758 = EDGE_LOOP('',(#167759,#167769,#167777,#167785)); +#167759 = ORIENTED_EDGE('',*,*,#167760,.T.); +#167760 = EDGE_CURVE('',#167761,#167763,#167765,.T.); +#167761 = VERTEX_POINT('',#167762); +#167762 = CARTESIAN_POINT('',(-0.6,1.15,0.)); +#167763 = VERTEX_POINT('',#167764); +#167764 = CARTESIAN_POINT('',(-0.6,0.75,0.)); +#167765 = LINE('',#167766,#167767); +#167766 = CARTESIAN_POINT('',(-0.6,1.15,0.)); +#167767 = VECTOR('',#167768,1.); +#167768 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#167769 = ORIENTED_EDGE('',*,*,#167770,.T.); +#167770 = EDGE_CURVE('',#167763,#167771,#167773,.T.); +#167771 = VERTEX_POINT('',#167772); +#167772 = CARTESIAN_POINT('',(-0.4,0.75,0.)); +#167773 = LINE('',#167774,#167775); +#167774 = CARTESIAN_POINT('',(-0.6,0.75,0.)); +#167775 = VECTOR('',#167776,1.); +#167776 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#167777 = ORIENTED_EDGE('',*,*,#167778,.T.); +#167778 = EDGE_CURVE('',#167771,#167779,#167781,.T.); +#167779 = VERTEX_POINT('',#167780); +#167780 = CARTESIAN_POINT('',(-0.4,1.15,0.)); +#167781 = LINE('',#167782,#167783); +#167782 = CARTESIAN_POINT('',(-0.4,0.75,0.)); +#167783 = VECTOR('',#167784,1.); +#167784 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#167785 = ORIENTED_EDGE('',*,*,#167786,.T.); +#167786 = EDGE_CURVE('',#167779,#167761,#167787,.T.); +#167787 = LINE('',#167788,#167789); +#167788 = CARTESIAN_POINT('',(-0.4,1.15,0.)); +#167789 = VECTOR('',#167790,1.); +#167790 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#167791 = PLANE('',#167792); +#167792 = AXIS2_PLACEMENT_3D('',#167793,#167794,#167795); +#167793 = CARTESIAN_POINT('',(-0.5,0.95,0.)); +#167794 = DIRECTION('',(0.,0.,1.)); +#167795 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#167796 = ADVANCED_FACE('',(#167797),#167822,.F.); +#167797 = FACE_BOUND('',#167798,.F.); +#167798 = EDGE_LOOP('',(#167799,#167800,#167808,#167816)); +#167799 = ORIENTED_EDGE('',*,*,#167760,.F.); +#167800 = ORIENTED_EDGE('',*,*,#167801,.T.); +#167801 = EDGE_CURVE('',#167761,#167802,#167804,.T.); +#167802 = VERTEX_POINT('',#167803); +#167803 = CARTESIAN_POINT('',(-0.6,1.15,3.E-02)); +#167804 = LINE('',#167805,#167806); +#167805 = CARTESIAN_POINT('',(-0.6,1.15,0.)); +#167806 = VECTOR('',#167807,1.); +#167807 = DIRECTION('',(0.,0.,1.)); +#167808 = ORIENTED_EDGE('',*,*,#167809,.F.); +#167809 = EDGE_CURVE('',#167810,#167802,#167812,.T.); +#167810 = VERTEX_POINT('',#167811); +#167811 = CARTESIAN_POINT('',(-0.6,0.75,3.E-02)); +#167812 = LINE('',#167813,#167814); +#167813 = CARTESIAN_POINT('',(-0.6,1.2,3.E-02)); +#167814 = VECTOR('',#167815,1.); +#167815 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#167816 = ORIENTED_EDGE('',*,*,#167817,.F.); +#167817 = EDGE_CURVE('',#167763,#167810,#167818,.T.); +#167818 = LINE('',#167819,#167820); +#167819 = CARTESIAN_POINT('',(-0.6,0.75,0.)); +#167820 = VECTOR('',#167821,1.); +#167821 = DIRECTION('',(0.,0.,1.)); +#167822 = PLANE('',#167823); +#167823 = AXIS2_PLACEMENT_3D('',#167824,#167825,#167826); +#167824 = CARTESIAN_POINT('',(-0.6,1.15,0.)); +#167825 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#167826 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#167827 = ADVANCED_FACE('',(#167828),#167846,.F.); +#167828 = FACE_BOUND('',#167829,.F.); +#167829 = EDGE_LOOP('',(#167830,#167831,#167832,#167840)); +#167830 = ORIENTED_EDGE('',*,*,#167770,.F.); +#167831 = ORIENTED_EDGE('',*,*,#167817,.T.); +#167832 = ORIENTED_EDGE('',*,*,#167833,.F.); +#167833 = EDGE_CURVE('',#167834,#167810,#167836,.T.); +#167834 = VERTEX_POINT('',#167835); +#167835 = CARTESIAN_POINT('',(-0.4,0.75,3.E-02)); +#167836 = LINE('',#167837,#167838); +#167837 = CARTESIAN_POINT('',(-1.05,0.75,3.E-02)); +#167838 = VECTOR('',#167839,1.); +#167839 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#167840 = ORIENTED_EDGE('',*,*,#167841,.F.); +#167841 = EDGE_CURVE('',#167771,#167834,#167842,.T.); +#167842 = LINE('',#167843,#167844); +#167843 = CARTESIAN_POINT('',(-0.4,0.75,0.)); +#167844 = VECTOR('',#167845,1.); +#167845 = DIRECTION('',(0.,0.,1.)); +#167846 = PLANE('',#167847); +#167847 = AXIS2_PLACEMENT_3D('',#167848,#167849,#167850); +#167848 = CARTESIAN_POINT('',(-0.6,0.75,0.)); +#167849 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#167850 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#167851 = ADVANCED_FACE('',(#167852),#167870,.F.); +#167852 = FACE_BOUND('',#167853,.F.); +#167853 = EDGE_LOOP('',(#167854,#167855,#167856,#167864)); +#167854 = ORIENTED_EDGE('',*,*,#167778,.F.); +#167855 = ORIENTED_EDGE('',*,*,#167841,.T.); +#167856 = ORIENTED_EDGE('',*,*,#167857,.F.); +#167857 = EDGE_CURVE('',#167858,#167834,#167860,.T.); +#167858 = VERTEX_POINT('',#167859); +#167859 = CARTESIAN_POINT('',(-0.4,1.15,3.E-02)); +#167860 = LINE('',#167861,#167862); +#167861 = CARTESIAN_POINT('',(-0.4,1.,3.E-02)); +#167862 = VECTOR('',#167863,1.); +#167863 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#167864 = ORIENTED_EDGE('',*,*,#167865,.F.); +#167865 = EDGE_CURVE('',#167779,#167858,#167866,.T.); +#167866 = LINE('',#167867,#167868); +#167867 = CARTESIAN_POINT('',(-0.4,1.15,0.)); +#167868 = VECTOR('',#167869,1.); +#167869 = DIRECTION('',(0.,0.,1.)); +#167870 = PLANE('',#167871); +#167871 = AXIS2_PLACEMENT_3D('',#167872,#167873,#167874); +#167872 = CARTESIAN_POINT('',(-0.4,0.75,0.)); +#167873 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#167874 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#167875 = ADVANCED_FACE('',(#167876),#167887,.F.); +#167876 = FACE_BOUND('',#167877,.F.); +#167877 = EDGE_LOOP('',(#167878,#167879,#167880,#167886)); +#167878 = ORIENTED_EDGE('',*,*,#167786,.F.); +#167879 = ORIENTED_EDGE('',*,*,#167865,.T.); +#167880 = ORIENTED_EDGE('',*,*,#167881,.F.); +#167881 = EDGE_CURVE('',#167802,#167858,#167882,.T.); +#167882 = LINE('',#167883,#167884); +#167883 = CARTESIAN_POINT('',(-0.95,1.15,3.E-02)); +#167884 = VECTOR('',#167885,1.); +#167885 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#167886 = ORIENTED_EDGE('',*,*,#167801,.F.); +#167887 = PLANE('',#167888); +#167888 = AXIS2_PLACEMENT_3D('',#167889,#167890,#167891); +#167889 = CARTESIAN_POINT('',(-0.4,1.15,0.)); +#167890 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#167891 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#167892 = ADVANCED_FACE('',(#167893,#167927,#167961,#167995,#168029, + #168063,#168097,#168131,#168165,#168199,#168233,#168267,#168273, + #168307,#168341),#168375,.F.); +#167893 = FACE_BOUND('',#167894,.F.); +#167894 = EDGE_LOOP('',(#167895,#167905,#167913,#167921)); +#167895 = ORIENTED_EDGE('',*,*,#167896,.F.); +#167896 = EDGE_CURVE('',#167897,#167899,#167901,.T.); +#167897 = VERTEX_POINT('',#167898); +#167898 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#167899 = VERTEX_POINT('',#167900); +#167900 = CARTESIAN_POINT('',(1.5,1.25,3.E-02)); +#167901 = LINE('',#167902,#167903); +#167902 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#167903 = VECTOR('',#167904,1.); +#167904 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#167905 = ORIENTED_EDGE('',*,*,#167906,.T.); +#167906 = EDGE_CURVE('',#167897,#167907,#167909,.T.); +#167907 = VERTEX_POINT('',#167908); +#167908 = CARTESIAN_POINT('',(-1.5,-1.25,3.E-02)); +#167909 = LINE('',#167910,#167911); +#167910 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#167911 = VECTOR('',#167912,1.); +#167912 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167913 = ORIENTED_EDGE('',*,*,#167914,.T.); +#167914 = EDGE_CURVE('',#167907,#167915,#167917,.T.); +#167915 = VERTEX_POINT('',#167916); +#167916 = CARTESIAN_POINT('',(1.5,-1.25,3.E-02)); +#167917 = LINE('',#167918,#167919); +#167918 = CARTESIAN_POINT('',(-1.5,-1.25,3.E-02)); +#167919 = VECTOR('',#167920,1.); +#167920 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#167921 = ORIENTED_EDGE('',*,*,#167922,.F.); +#167922 = EDGE_CURVE('',#167899,#167915,#167923,.T.); +#167923 = LINE('',#167924,#167925); +#167924 = CARTESIAN_POINT('',(1.5,1.25,3.E-02)); +#167925 = VECTOR('',#167926,1.); +#167926 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#167927 = FACE_BOUND('',#167928,.F.); +#167928 = EDGE_LOOP('',(#167929,#167939,#167947,#167955)); +#167929 = ORIENTED_EDGE('',*,*,#167930,.T.); +#167930 = EDGE_CURVE('',#167931,#167933,#167935,.T.); +#167931 = VERTEX_POINT('',#167932); +#167932 = CARTESIAN_POINT('',(-1.4,-0.65,3.E-02)); +#167933 = VERTEX_POINT('',#167934); +#167934 = CARTESIAN_POINT('',(-1.,-0.65,3.E-02)); +#167935 = LINE('',#167936,#167937); +#167936 = CARTESIAN_POINT('',(-1.25,-0.65,3.E-02)); +#167937 = VECTOR('',#167938,1.); +#167938 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#167939 = ORIENTED_EDGE('',*,*,#167940,.T.); +#167940 = EDGE_CURVE('',#167933,#167941,#167943,.T.); +#167941 = VERTEX_POINT('',#167942); +#167942 = CARTESIAN_POINT('',(-1.,-0.85,3.E-02)); +#167943 = LINE('',#167944,#167945); +#167944 = CARTESIAN_POINT('',(-1.,0.2,3.E-02)); +#167945 = VECTOR('',#167946,1.); +#167946 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#167947 = ORIENTED_EDGE('',*,*,#167948,.T.); +#167948 = EDGE_CURVE('',#167941,#167949,#167951,.T.); +#167949 = VERTEX_POINT('',#167950); +#167950 = CARTESIAN_POINT('',(-1.4,-0.85,3.E-02)); +#167951 = LINE('',#167952,#167953); +#167952 = CARTESIAN_POINT('',(-1.45,-0.85,3.E-02)); +#167953 = VECTOR('',#167954,1.); +#167954 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#167955 = ORIENTED_EDGE('',*,*,#167956,.T.); +#167956 = EDGE_CURVE('',#167949,#167931,#167957,.T.); +#167957 = LINE('',#167958,#167959); +#167958 = CARTESIAN_POINT('',(-1.4,0.3,3.E-02)); +#167959 = VECTOR('',#167960,1.); +#167960 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#167961 = FACE_BOUND('',#167962,.F.); +#167962 = EDGE_LOOP('',(#167963,#167973,#167981,#167989)); +#167963 = ORIENTED_EDGE('',*,*,#167964,.T.); +#167964 = EDGE_CURVE('',#167965,#167967,#167969,.T.); +#167965 = VERTEX_POINT('',#167966); +#167966 = CARTESIAN_POINT('',(-0.1,-0.75,3.E-02)); +#167967 = VERTEX_POINT('',#167968); +#167968 = CARTESIAN_POINT('',(0.1,-0.75,3.E-02)); +#167969 = LINE('',#167970,#167971); +#167970 = CARTESIAN_POINT('',(-0.7,-0.75,3.E-02)); +#167971 = VECTOR('',#167972,1.); +#167972 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#167973 = ORIENTED_EDGE('',*,*,#167974,.T.); +#167974 = EDGE_CURVE('',#167967,#167975,#167977,.T.); +#167975 = VERTEX_POINT('',#167976); +#167976 = CARTESIAN_POINT('',(0.1,-1.15,3.E-02)); +#167977 = LINE('',#167978,#167979); +#167978 = CARTESIAN_POINT('',(0.1,5.E-02,3.E-02)); +#167979 = VECTOR('',#167980,1.); +#167980 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#167981 = ORIENTED_EDGE('',*,*,#167982,.T.); +#167982 = EDGE_CURVE('',#167975,#167983,#167985,.T.); +#167983 = VERTEX_POINT('',#167984); +#167984 = CARTESIAN_POINT('',(-0.1,-1.15,3.E-02)); +#167985 = LINE('',#167986,#167987); +#167986 = CARTESIAN_POINT('',(-0.8,-1.15,3.E-02)); +#167987 = VECTOR('',#167988,1.); +#167988 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#167989 = ORIENTED_EDGE('',*,*,#167990,.T.); +#167990 = EDGE_CURVE('',#167983,#167965,#167991,.T.); +#167991 = LINE('',#167992,#167993); +#167992 = CARTESIAN_POINT('',(-0.1,0.25,3.E-02)); +#167993 = VECTOR('',#167994,1.); +#167994 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#167995 = FACE_BOUND('',#167996,.F.); +#167996 = EDGE_LOOP('',(#167997,#168007,#168015,#168023)); +#167997 = ORIENTED_EDGE('',*,*,#167998,.T.); +#167998 = EDGE_CURVE('',#167999,#168001,#168003,.T.); +#167999 = VERTEX_POINT('',#168000); +#168000 = CARTESIAN_POINT('',(-0.6,-0.75,3.E-02)); +#168001 = VERTEX_POINT('',#168002); +#168002 = CARTESIAN_POINT('',(-0.4,-0.75,3.E-02)); +#168003 = LINE('',#168004,#168005); +#168004 = CARTESIAN_POINT('',(-0.95,-0.75,3.E-02)); +#168005 = VECTOR('',#168006,1.); +#168006 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168007 = ORIENTED_EDGE('',*,*,#168008,.T.); +#168008 = EDGE_CURVE('',#168001,#168009,#168011,.T.); +#168009 = VERTEX_POINT('',#168010); +#168010 = CARTESIAN_POINT('',(-0.4,-1.15,3.E-02)); +#168011 = LINE('',#168012,#168013); +#168012 = CARTESIAN_POINT('',(-0.4,5.E-02,3.E-02)); +#168013 = VECTOR('',#168014,1.); +#168014 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168015 = ORIENTED_EDGE('',*,*,#168016,.T.); +#168016 = EDGE_CURVE('',#168009,#168017,#168019,.T.); +#168017 = VERTEX_POINT('',#168018); +#168018 = CARTESIAN_POINT('',(-0.6,-1.15,3.E-02)); +#168019 = LINE('',#168020,#168021); +#168020 = CARTESIAN_POINT('',(-1.05,-1.15,3.E-02)); +#168021 = VECTOR('',#168022,1.); +#168022 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168023 = ORIENTED_EDGE('',*,*,#168024,.T.); +#168024 = EDGE_CURVE('',#168017,#167999,#168025,.T.); +#168025 = LINE('',#168026,#168027); +#168026 = CARTESIAN_POINT('',(-0.6,0.25,3.E-02)); +#168027 = VECTOR('',#168028,1.); +#168028 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168029 = FACE_BOUND('',#168030,.F.); +#168030 = EDGE_LOOP('',(#168031,#168041,#168049,#168057)); +#168031 = ORIENTED_EDGE('',*,*,#168032,.T.); +#168032 = EDGE_CURVE('',#168033,#168035,#168037,.T.); +#168033 = VERTEX_POINT('',#168034); +#168034 = CARTESIAN_POINT('',(1.,-0.85,3.E-02)); +#168035 = VERTEX_POINT('',#168036); +#168036 = CARTESIAN_POINT('',(1.,-0.65,3.E-02)); +#168037 = LINE('',#168038,#168039); +#168038 = CARTESIAN_POINT('',(1.,0.3,3.E-02)); +#168039 = VECTOR('',#168040,1.); +#168040 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168041 = ORIENTED_EDGE('',*,*,#168042,.T.); +#168042 = EDGE_CURVE('',#168035,#168043,#168045,.T.); +#168043 = VERTEX_POINT('',#168044); +#168044 = CARTESIAN_POINT('',(1.4,-0.65,3.E-02)); +#168045 = LINE('',#168046,#168047); +#168046 = CARTESIAN_POINT('',(-5.E-02,-0.65,3.E-02)); +#168047 = VECTOR('',#168048,1.); +#168048 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168049 = ORIENTED_EDGE('',*,*,#168050,.T.); +#168050 = EDGE_CURVE('',#168043,#168051,#168053,.T.); +#168051 = VERTEX_POINT('',#168052); +#168052 = CARTESIAN_POINT('',(1.4,-0.85,3.E-02)); +#168053 = LINE('',#168054,#168055); +#168054 = CARTESIAN_POINT('',(1.4,0.2,3.E-02)); +#168055 = VECTOR('',#168056,1.); +#168056 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168057 = ORIENTED_EDGE('',*,*,#168058,.T.); +#168058 = EDGE_CURVE('',#168051,#168033,#168059,.T.); +#168059 = LINE('',#168060,#168061); +#168060 = CARTESIAN_POINT('',(-0.25,-0.85,3.E-02)); +#168061 = VECTOR('',#168062,1.); +#168062 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168063 = FACE_BOUND('',#168064,.F.); +#168064 = EDGE_LOOP('',(#168065,#168075,#168083,#168091)); +#168065 = ORIENTED_EDGE('',*,*,#168066,.T.); +#168066 = EDGE_CURVE('',#168067,#168069,#168071,.T.); +#168067 = VERTEX_POINT('',#168068); +#168068 = CARTESIAN_POINT('',(0.4,-0.75,3.E-02)); +#168069 = VERTEX_POINT('',#168070); +#168070 = CARTESIAN_POINT('',(0.6,-0.75,3.E-02)); +#168071 = LINE('',#168072,#168073); +#168072 = CARTESIAN_POINT('',(-0.45,-0.75,3.E-02)); +#168073 = VECTOR('',#168074,1.); +#168074 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168075 = ORIENTED_EDGE('',*,*,#168076,.T.); +#168076 = EDGE_CURVE('',#168069,#168077,#168079,.T.); +#168077 = VERTEX_POINT('',#168078); +#168078 = CARTESIAN_POINT('',(0.6,-1.15,3.E-02)); +#168079 = LINE('',#168080,#168081); +#168080 = CARTESIAN_POINT('',(0.6,5.E-02,3.E-02)); +#168081 = VECTOR('',#168082,1.); +#168082 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168083 = ORIENTED_EDGE('',*,*,#168084,.T.); +#168084 = EDGE_CURVE('',#168077,#168085,#168087,.T.); +#168085 = VERTEX_POINT('',#168086); +#168086 = CARTESIAN_POINT('',(0.4,-1.15,3.E-02)); +#168087 = LINE('',#168088,#168089); +#168088 = CARTESIAN_POINT('',(-0.55,-1.15,3.E-02)); +#168089 = VECTOR('',#168090,1.); +#168090 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168091 = ORIENTED_EDGE('',*,*,#168092,.T.); +#168092 = EDGE_CURVE('',#168085,#168067,#168093,.T.); +#168093 = LINE('',#168094,#168095); +#168094 = CARTESIAN_POINT('',(0.4,0.25,3.E-02)); +#168095 = VECTOR('',#168096,1.); +#168096 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168097 = FACE_BOUND('',#168098,.F.); +#168098 = EDGE_LOOP('',(#168099,#168109,#168117,#168125)); +#168099 = ORIENTED_EDGE('',*,*,#168100,.T.); +#168100 = EDGE_CURVE('',#168101,#168103,#168105,.T.); +#168101 = VERTEX_POINT('',#168102); +#168102 = CARTESIAN_POINT('',(-1.,0.35,3.E-02)); +#168103 = VERTEX_POINT('',#168104); +#168104 = CARTESIAN_POINT('',(-1.,0.15,3.E-02)); +#168105 = LINE('',#168106,#168107); +#168106 = CARTESIAN_POINT('',(-1.,0.7,3.E-02)); +#168107 = VECTOR('',#168108,1.); +#168108 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168109 = ORIENTED_EDGE('',*,*,#168110,.T.); +#168110 = EDGE_CURVE('',#168103,#168111,#168113,.T.); +#168111 = VERTEX_POINT('',#168112); +#168112 = CARTESIAN_POINT('',(-1.4,0.15,3.E-02)); +#168113 = LINE('',#168114,#168115); +#168114 = CARTESIAN_POINT('',(-1.45,0.15,3.E-02)); +#168115 = VECTOR('',#168116,1.); +#168116 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168117 = ORIENTED_EDGE('',*,*,#168118,.T.); +#168118 = EDGE_CURVE('',#168111,#168119,#168121,.T.); +#168119 = VERTEX_POINT('',#168120); +#168120 = CARTESIAN_POINT('',(-1.4,0.35,3.E-02)); +#168121 = LINE('',#168122,#168123); +#168122 = CARTESIAN_POINT('',(-1.4,0.8,3.E-02)); +#168123 = VECTOR('',#168124,1.); +#168124 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168125 = ORIENTED_EDGE('',*,*,#168126,.T.); +#168126 = EDGE_CURVE('',#168119,#168101,#168127,.T.); +#168127 = LINE('',#168128,#168129); +#168128 = CARTESIAN_POINT('',(-1.25,0.35,3.E-02)); +#168129 = VECTOR('',#168130,1.); +#168130 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168131 = FACE_BOUND('',#168132,.F.); +#168132 = EDGE_LOOP('',(#168133,#168143,#168151,#168159)); +#168133 = ORIENTED_EDGE('',*,*,#168134,.T.); +#168134 = EDGE_CURVE('',#168135,#168137,#168139,.T.); +#168135 = VERTEX_POINT('',#168136); +#168136 = CARTESIAN_POINT('',(-1.,-0.15,3.E-02)); +#168137 = VERTEX_POINT('',#168138); +#168138 = CARTESIAN_POINT('',(-1.,-0.35,3.E-02)); +#168139 = LINE('',#168140,#168141); +#168140 = CARTESIAN_POINT('',(-1.,0.45,3.E-02)); +#168141 = VECTOR('',#168142,1.); +#168142 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168143 = ORIENTED_EDGE('',*,*,#168144,.T.); +#168144 = EDGE_CURVE('',#168137,#168145,#168147,.T.); +#168145 = VERTEX_POINT('',#168146); +#168146 = CARTESIAN_POINT('',(-1.4,-0.35,3.E-02)); +#168147 = LINE('',#168148,#168149); +#168148 = CARTESIAN_POINT('',(-1.45,-0.35,3.E-02)); +#168149 = VECTOR('',#168150,1.); +#168150 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168151 = ORIENTED_EDGE('',*,*,#168152,.T.); +#168152 = EDGE_CURVE('',#168145,#168153,#168155,.T.); +#168153 = VERTEX_POINT('',#168154); +#168154 = CARTESIAN_POINT('',(-1.4,-0.15,3.E-02)); +#168155 = LINE('',#168156,#168157); +#168156 = CARTESIAN_POINT('',(-1.4,0.55,3.E-02)); +#168157 = VECTOR('',#168158,1.); +#168158 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168159 = ORIENTED_EDGE('',*,*,#168160,.T.); +#168160 = EDGE_CURVE('',#168153,#168135,#168161,.T.); +#168161 = LINE('',#168162,#168163); +#168162 = CARTESIAN_POINT('',(-1.25,-0.15,3.E-02)); +#168163 = VECTOR('',#168164,1.); +#168164 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168165 = FACE_BOUND('',#168166,.F.); +#168166 = EDGE_LOOP('',(#168167,#168177,#168185,#168193)); +#168167 = ORIENTED_EDGE('',*,*,#168168,.T.); +#168168 = EDGE_CURVE('',#168169,#168171,#168173,.T.); +#168169 = VERTEX_POINT('',#168170); +#168170 = CARTESIAN_POINT('',(1.,-0.15,3.E-02)); +#168171 = VERTEX_POINT('',#168172); +#168172 = CARTESIAN_POINT('',(1.4,-0.15,3.E-02)); +#168173 = LINE('',#168174,#168175); +#168174 = CARTESIAN_POINT('',(-5.E-02,-0.15,3.E-02)); +#168175 = VECTOR('',#168176,1.); +#168176 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168177 = ORIENTED_EDGE('',*,*,#168178,.T.); +#168178 = EDGE_CURVE('',#168171,#168179,#168181,.T.); +#168179 = VERTEX_POINT('',#168180); +#168180 = CARTESIAN_POINT('',(1.4,-0.35,3.E-02)); +#168181 = LINE('',#168182,#168183); +#168182 = CARTESIAN_POINT('',(1.4,0.45,3.E-02)); +#168183 = VECTOR('',#168184,1.); +#168184 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168185 = ORIENTED_EDGE('',*,*,#168186,.T.); +#168186 = EDGE_CURVE('',#168179,#168187,#168189,.T.); +#168187 = VERTEX_POINT('',#168188); +#168188 = CARTESIAN_POINT('',(1.,-0.35,3.E-02)); +#168189 = LINE('',#168190,#168191); +#168190 = CARTESIAN_POINT('',(-0.25,-0.35,3.E-02)); +#168191 = VECTOR('',#168192,1.); +#168192 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168193 = ORIENTED_EDGE('',*,*,#168194,.T.); +#168194 = EDGE_CURVE('',#168187,#168169,#168195,.T.); +#168195 = LINE('',#168196,#168197); +#168196 = CARTESIAN_POINT('',(1.,0.55,3.E-02)); +#168197 = VECTOR('',#168198,1.); +#168198 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168199 = FACE_BOUND('',#168200,.F.); +#168200 = EDGE_LOOP('',(#168201,#168211,#168219,#168227)); +#168201 = ORIENTED_EDGE('',*,*,#168202,.T.); +#168202 = EDGE_CURVE('',#168203,#168205,#168207,.T.); +#168203 = VERTEX_POINT('',#168204); +#168204 = CARTESIAN_POINT('',(1.4,0.15,3.E-02)); +#168205 = VERTEX_POINT('',#168206); +#168206 = CARTESIAN_POINT('',(1.,0.15,3.E-02)); +#168207 = LINE('',#168208,#168209); +#168208 = CARTESIAN_POINT('',(-0.25,0.15,3.E-02)); +#168209 = VECTOR('',#168210,1.); +#168210 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168211 = ORIENTED_EDGE('',*,*,#168212,.T.); +#168212 = EDGE_CURVE('',#168205,#168213,#168215,.T.); +#168213 = VERTEX_POINT('',#168214); +#168214 = CARTESIAN_POINT('',(1.,0.35,3.E-02)); +#168215 = LINE('',#168216,#168217); +#168216 = CARTESIAN_POINT('',(1.,0.8,3.E-02)); +#168217 = VECTOR('',#168218,1.); +#168218 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168219 = ORIENTED_EDGE('',*,*,#168220,.T.); +#168220 = EDGE_CURVE('',#168213,#168221,#168223,.T.); +#168221 = VERTEX_POINT('',#168222); +#168222 = CARTESIAN_POINT('',(1.4,0.35,3.E-02)); +#168223 = LINE('',#168224,#168225); +#168224 = CARTESIAN_POINT('',(-5.E-02,0.35,3.E-02)); +#168225 = VECTOR('',#168226,1.); +#168226 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168227 = ORIENTED_EDGE('',*,*,#168228,.T.); +#168228 = EDGE_CURVE('',#168221,#168203,#168229,.T.); +#168229 = LINE('',#168230,#168231); +#168230 = CARTESIAN_POINT('',(1.4,0.7,3.E-02)); +#168231 = VECTOR('',#168232,1.); +#168232 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168233 = FACE_BOUND('',#168234,.F.); +#168234 = EDGE_LOOP('',(#168235,#168245,#168253,#168261)); +#168235 = ORIENTED_EDGE('',*,*,#168236,.T.); +#168236 = EDGE_CURVE('',#168237,#168239,#168241,.T.); +#168237 = VERTEX_POINT('',#168238); +#168238 = CARTESIAN_POINT('',(0.4,1.15,3.E-02)); +#168239 = VERTEX_POINT('',#168240); +#168240 = CARTESIAN_POINT('',(0.6,1.15,3.E-02)); +#168241 = LINE('',#168242,#168243); +#168242 = CARTESIAN_POINT('',(-0.45,1.15,3.E-02)); +#168243 = VECTOR('',#168244,1.); +#168244 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#168245 = ORIENTED_EDGE('',*,*,#168246,.T.); +#168246 = EDGE_CURVE('',#168239,#168247,#168249,.T.); +#168247 = VERTEX_POINT('',#168248); +#168248 = CARTESIAN_POINT('',(0.6,0.75,3.E-02)); +#168249 = LINE('',#168250,#168251); +#168250 = CARTESIAN_POINT('',(0.6,1.,3.E-02)); +#168251 = VECTOR('',#168252,1.); +#168252 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#168253 = ORIENTED_EDGE('',*,*,#168254,.T.); +#168254 = EDGE_CURVE('',#168247,#168255,#168257,.T.); +#168255 = VERTEX_POINT('',#168256); +#168256 = CARTESIAN_POINT('',(0.4,0.75,3.E-02)); +#168257 = LINE('',#168258,#168259); +#168258 = CARTESIAN_POINT('',(-0.55,0.75,3.E-02)); +#168259 = VECTOR('',#168260,1.); +#168260 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#168261 = ORIENTED_EDGE('',*,*,#168262,.T.); +#168262 = EDGE_CURVE('',#168255,#168237,#168263,.T.); +#168263 = LINE('',#168264,#168265); +#168264 = CARTESIAN_POINT('',(0.4,1.2,3.E-02)); +#168265 = VECTOR('',#168266,1.); +#168266 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#168267 = FACE_BOUND('',#168268,.F.); +#168268 = EDGE_LOOP('',(#168269,#168270,#168271,#168272)); +#168269 = ORIENTED_EDGE('',*,*,#167809,.T.); +#168270 = ORIENTED_EDGE('',*,*,#167881,.T.); +#168271 = ORIENTED_EDGE('',*,*,#167857,.T.); +#168272 = ORIENTED_EDGE('',*,*,#167833,.T.); +#168273 = FACE_BOUND('',#168274,.F.); +#168274 = EDGE_LOOP('',(#168275,#168285,#168293,#168301)); +#168275 = ORIENTED_EDGE('',*,*,#168276,.T.); +#168276 = EDGE_CURVE('',#168277,#168279,#168281,.T.); +#168277 = VERTEX_POINT('',#168278); +#168278 = CARTESIAN_POINT('',(-0.1,1.15,3.E-02)); +#168279 = VERTEX_POINT('',#168280); +#168280 = CARTESIAN_POINT('',(0.1,1.15,3.E-02)); +#168281 = LINE('',#168282,#168283); +#168282 = CARTESIAN_POINT('',(-0.7,1.15,3.E-02)); +#168283 = VECTOR('',#168284,1.); +#168284 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#168285 = ORIENTED_EDGE('',*,*,#168286,.T.); +#168286 = EDGE_CURVE('',#168279,#168287,#168289,.T.); +#168287 = VERTEX_POINT('',#168288); +#168288 = CARTESIAN_POINT('',(0.1,0.75,3.E-02)); +#168289 = LINE('',#168290,#168291); +#168290 = CARTESIAN_POINT('',(0.1,1.,3.E-02)); +#168291 = VECTOR('',#168292,1.); +#168292 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#168293 = ORIENTED_EDGE('',*,*,#168294,.T.); +#168294 = EDGE_CURVE('',#168287,#168295,#168297,.T.); +#168295 = VERTEX_POINT('',#168296); +#168296 = CARTESIAN_POINT('',(-0.1,0.75,3.E-02)); +#168297 = LINE('',#168298,#168299); +#168298 = CARTESIAN_POINT('',(-0.8,0.75,3.E-02)); +#168299 = VECTOR('',#168300,1.); +#168300 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#168301 = ORIENTED_EDGE('',*,*,#168302,.T.); +#168302 = EDGE_CURVE('',#168295,#168277,#168303,.T.); +#168303 = LINE('',#168304,#168305); +#168304 = CARTESIAN_POINT('',(-0.1,1.2,3.E-02)); +#168305 = VECTOR('',#168306,1.); +#168306 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#168307 = FACE_BOUND('',#168308,.F.); +#168308 = EDGE_LOOP('',(#168309,#168319,#168327,#168335)); +#168309 = ORIENTED_EDGE('',*,*,#168310,.T.); +#168310 = EDGE_CURVE('',#168311,#168313,#168315,.T.); +#168311 = VERTEX_POINT('',#168312); +#168312 = CARTESIAN_POINT('',(1.,0.65,3.E-02)); +#168313 = VERTEX_POINT('',#168314); +#168314 = CARTESIAN_POINT('',(1.,0.85,3.E-02)); +#168315 = LINE('',#168316,#168317); +#168316 = CARTESIAN_POINT('',(1.,1.05,3.E-02)); +#168317 = VECTOR('',#168318,1.); +#168318 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168319 = ORIENTED_EDGE('',*,*,#168320,.T.); +#168320 = EDGE_CURVE('',#168313,#168321,#168323,.T.); +#168321 = VERTEX_POINT('',#168322); +#168322 = CARTESIAN_POINT('',(1.4,0.85,3.E-02)); +#168323 = LINE('',#168324,#168325); +#168324 = CARTESIAN_POINT('',(-5.E-02,0.85,3.E-02)); +#168325 = VECTOR('',#168326,1.); +#168326 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168327 = ORIENTED_EDGE('',*,*,#168328,.T.); +#168328 = EDGE_CURVE('',#168321,#168329,#168331,.T.); +#168329 = VERTEX_POINT('',#168330); +#168330 = CARTESIAN_POINT('',(1.4,0.65,3.E-02)); +#168331 = LINE('',#168332,#168333); +#168332 = CARTESIAN_POINT('',(1.4,0.95,3.E-02)); +#168333 = VECTOR('',#168334,1.); +#168334 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168335 = ORIENTED_EDGE('',*,*,#168336,.T.); +#168336 = EDGE_CURVE('',#168329,#168311,#168337,.T.); +#168337 = LINE('',#168338,#168339); +#168338 = CARTESIAN_POINT('',(-0.25,0.65,3.E-02)); +#168339 = VECTOR('',#168340,1.); +#168340 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168341 = FACE_BOUND('',#168342,.F.); +#168342 = EDGE_LOOP('',(#168343,#168353,#168361,#168369)); +#168343 = ORIENTED_EDGE('',*,*,#168344,.T.); +#168344 = EDGE_CURVE('',#168345,#168347,#168349,.T.); +#168345 = VERTEX_POINT('',#168346); +#168346 = CARTESIAN_POINT('',(-1.4,0.65,3.E-02)); +#168347 = VERTEX_POINT('',#168348); +#168348 = CARTESIAN_POINT('',(-1.4,0.85,3.E-02)); +#168349 = LINE('',#168350,#168351); +#168350 = CARTESIAN_POINT('',(-1.4,1.05,3.E-02)); +#168351 = VECTOR('',#168352,1.); +#168352 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168353 = ORIENTED_EDGE('',*,*,#168354,.T.); +#168354 = EDGE_CURVE('',#168347,#168355,#168357,.T.); +#168355 = VERTEX_POINT('',#168356); +#168356 = CARTESIAN_POINT('',(-1.,0.85,3.E-02)); +#168357 = LINE('',#168358,#168359); +#168358 = CARTESIAN_POINT('',(-1.25,0.85,3.E-02)); +#168359 = VECTOR('',#168360,1.); +#168360 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168361 = ORIENTED_EDGE('',*,*,#168362,.T.); +#168362 = EDGE_CURVE('',#168355,#168363,#168365,.T.); +#168363 = VERTEX_POINT('',#168364); +#168364 = CARTESIAN_POINT('',(-1.,0.65,3.E-02)); +#168365 = LINE('',#168366,#168367); +#168366 = CARTESIAN_POINT('',(-1.,0.95,3.E-02)); +#168367 = VECTOR('',#168368,1.); +#168368 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168369 = ORIENTED_EDGE('',*,*,#168370,.T.); +#168370 = EDGE_CURVE('',#168363,#168345,#168371,.T.); +#168371 = LINE('',#168372,#168373); +#168372 = CARTESIAN_POINT('',(-1.45,0.65,3.E-02)); +#168373 = VECTOR('',#168374,1.); +#168374 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168375 = PLANE('',#168376); +#168376 = AXIS2_PLACEMENT_3D('',#168377,#168378,#168379); +#168377 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#168378 = DIRECTION('',(0.,0.,1.)); +#168379 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#168380 = ADVANCED_FACE('',(#168381),#168406,.F.); +#168381 = FACE_BOUND('',#168382,.F.); +#168382 = EDGE_LOOP('',(#168383,#168391,#168392,#168400)); +#168383 = ORIENTED_EDGE('',*,*,#168384,.F.); +#168384 = EDGE_CURVE('',#167897,#168385,#168387,.T.); +#168385 = VERTEX_POINT('',#168386); +#168386 = CARTESIAN_POINT('',(-1.5,1.25,0.78)); +#168387 = LINE('',#168388,#168389); +#168388 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#168389 = VECTOR('',#168390,1.); +#168390 = DIRECTION('',(0.,0.,1.)); +#168391 = ORIENTED_EDGE('',*,*,#167896,.T.); +#168392 = ORIENTED_EDGE('',*,*,#168393,.T.); +#168393 = EDGE_CURVE('',#167899,#168394,#168396,.T.); +#168394 = VERTEX_POINT('',#168395); +#168395 = CARTESIAN_POINT('',(1.5,1.25,0.78)); +#168396 = LINE('',#168397,#168398); +#168397 = CARTESIAN_POINT('',(1.5,1.25,3.E-02)); +#168398 = VECTOR('',#168399,1.); +#168399 = DIRECTION('',(0.,0.,1.)); +#168400 = ORIENTED_EDGE('',*,*,#168401,.F.); +#168401 = EDGE_CURVE('',#168385,#168394,#168402,.T.); +#168402 = LINE('',#168403,#168404); +#168403 = CARTESIAN_POINT('',(-1.5,1.25,0.78)); +#168404 = VECTOR('',#168405,1.); +#168405 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#168406 = PLANE('',#168407); +#168407 = AXIS2_PLACEMENT_3D('',#168408,#168409,#168410); +#168408 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#168409 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#168410 = DIRECTION('',(0.,0.,1.)); +#168411 = ADVANCED_FACE('',(#168412),#168430,.T.); +#168412 = FACE_BOUND('',#168413,.T.); +#168413 = EDGE_LOOP('',(#168414,#168415,#168416,#168424)); +#168414 = ORIENTED_EDGE('',*,*,#167922,.F.); +#168415 = ORIENTED_EDGE('',*,*,#168393,.T.); +#168416 = ORIENTED_EDGE('',*,*,#168417,.T.); +#168417 = EDGE_CURVE('',#168394,#168418,#168420,.T.); +#168418 = VERTEX_POINT('',#168419); +#168419 = CARTESIAN_POINT('',(1.5,-1.25,0.78)); +#168420 = LINE('',#168421,#168422); +#168421 = CARTESIAN_POINT('',(1.5,1.25,0.78)); +#168422 = VECTOR('',#168423,1.); +#168423 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#168424 = ORIENTED_EDGE('',*,*,#168425,.F.); +#168425 = EDGE_CURVE('',#167915,#168418,#168426,.T.); +#168426 = LINE('',#168427,#168428); +#168427 = CARTESIAN_POINT('',(1.5,-1.25,3.E-02)); +#168428 = VECTOR('',#168429,1.); +#168429 = DIRECTION('',(0.,0.,1.)); +#168430 = PLANE('',#168431); +#168431 = AXIS2_PLACEMENT_3D('',#168432,#168433,#168434); +#168432 = CARTESIAN_POINT('',(1.5,1.25,3.E-02)); +#168433 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#168434 = DIRECTION('',(0.,0.,1.)); +#168435 = ADVANCED_FACE('',(#168436),#168454,.F.); +#168436 = FACE_BOUND('',#168437,.F.); +#168437 = EDGE_LOOP('',(#168438,#168439,#168440,#168448)); +#168438 = ORIENTED_EDGE('',*,*,#167906,.F.); +#168439 = ORIENTED_EDGE('',*,*,#168384,.T.); +#168440 = ORIENTED_EDGE('',*,*,#168441,.T.); +#168441 = EDGE_CURVE('',#168385,#168442,#168444,.T.); +#168442 = VERTEX_POINT('',#168443); +#168443 = CARTESIAN_POINT('',(-1.5,-1.25,0.78)); +#168444 = LINE('',#168445,#168446); +#168445 = CARTESIAN_POINT('',(-1.5,1.25,0.78)); +#168446 = VECTOR('',#168447,1.); +#168447 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#168448 = ORIENTED_EDGE('',*,*,#168449,.F.); +#168449 = EDGE_CURVE('',#167907,#168442,#168450,.T.); +#168450 = LINE('',#168451,#168452); +#168451 = CARTESIAN_POINT('',(-1.5,-1.25,3.E-02)); +#168452 = VECTOR('',#168453,1.); +#168453 = DIRECTION('',(0.,0.,1.)); +#168454 = PLANE('',#168455); +#168455 = AXIS2_PLACEMENT_3D('',#168456,#168457,#168458); +#168456 = CARTESIAN_POINT('',(-1.5,1.25,3.E-02)); +#168457 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#168458 = DIRECTION('',(0.,0.,1.)); +#168459 = ADVANCED_FACE('',(#168460),#168471,.T.); +#168460 = FACE_BOUND('',#168461,.T.); +#168461 = EDGE_LOOP('',(#168462,#168463,#168464,#168465)); +#168462 = ORIENTED_EDGE('',*,*,#168449,.F.); +#168463 = ORIENTED_EDGE('',*,*,#167914,.T.); +#168464 = ORIENTED_EDGE('',*,*,#168425,.T.); +#168465 = ORIENTED_EDGE('',*,*,#168466,.F.); +#168466 = EDGE_CURVE('',#168442,#168418,#168467,.T.); +#168467 = LINE('',#168468,#168469); +#168468 = CARTESIAN_POINT('',(-1.5,-1.25,0.78)); +#168469 = VECTOR('',#168470,1.); +#168470 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#168471 = PLANE('',#168472); +#168472 = AXIS2_PLACEMENT_3D('',#168473,#168474,#168475); +#168473 = CARTESIAN_POINT('',(-1.5,-1.25,3.E-02)); +#168474 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#168475 = DIRECTION('',(0.,0.,1.)); +#168476 = ADVANCED_FACE('',(#168477),#168502,.F.); +#168477 = FACE_BOUND('',#168478,.F.); +#168478 = EDGE_LOOP('',(#168479,#168489,#168495,#168496)); +#168479 = ORIENTED_EDGE('',*,*,#168480,.F.); +#168480 = EDGE_CURVE('',#168481,#168483,#168485,.T.); +#168481 = VERTEX_POINT('',#168482); +#168482 = CARTESIAN_POINT('',(-1.,-0.65,0.)); +#168483 = VERTEX_POINT('',#168484); +#168484 = CARTESIAN_POINT('',(-1.4,-0.65,0.)); +#168485 = LINE('',#168486,#168487); +#168486 = CARTESIAN_POINT('',(-1.,-0.65,0.)); +#168487 = VECTOR('',#168488,1.); +#168488 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168489 = ORIENTED_EDGE('',*,*,#168490,.T.); +#168490 = EDGE_CURVE('',#168481,#167933,#168491,.T.); +#168491 = LINE('',#168492,#168493); +#168492 = CARTESIAN_POINT('',(-1.,-0.65,0.)); +#168493 = VECTOR('',#168494,1.); +#168494 = DIRECTION('',(0.,0.,1.)); +#168495 = ORIENTED_EDGE('',*,*,#167930,.F.); +#168496 = ORIENTED_EDGE('',*,*,#168497,.F.); +#168497 = EDGE_CURVE('',#168483,#167931,#168498,.T.); +#168498 = LINE('',#168499,#168500); +#168499 = CARTESIAN_POINT('',(-1.4,-0.65,0.)); +#168500 = VECTOR('',#168501,1.); +#168501 = DIRECTION('',(0.,0.,1.)); +#168502 = PLANE('',#168503); +#168503 = AXIS2_PLACEMENT_3D('',#168504,#168505,#168506); +#168504 = CARTESIAN_POINT('',(-1.,-0.65,0.)); +#168505 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168506 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168507 = ADVANCED_FACE('',(#168508),#168526,.F.); +#168508 = FACE_BOUND('',#168509,.F.); +#168509 = EDGE_LOOP('',(#168510,#168518,#168519,#168520)); +#168510 = ORIENTED_EDGE('',*,*,#168511,.F.); +#168511 = EDGE_CURVE('',#168483,#168512,#168514,.T.); +#168512 = VERTEX_POINT('',#168513); +#168513 = CARTESIAN_POINT('',(-1.4,-0.85,0.)); +#168514 = LINE('',#168515,#168516); +#168515 = CARTESIAN_POINT('',(-1.4,-0.65,0.)); +#168516 = VECTOR('',#168517,1.); +#168517 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168518 = ORIENTED_EDGE('',*,*,#168497,.T.); +#168519 = ORIENTED_EDGE('',*,*,#167956,.F.); +#168520 = ORIENTED_EDGE('',*,*,#168521,.F.); +#168521 = EDGE_CURVE('',#168512,#167949,#168522,.T.); +#168522 = LINE('',#168523,#168524); +#168523 = CARTESIAN_POINT('',(-1.4,-0.85,0.)); +#168524 = VECTOR('',#168525,1.); +#168525 = DIRECTION('',(0.,0.,1.)); +#168526 = PLANE('',#168527); +#168527 = AXIS2_PLACEMENT_3D('',#168528,#168529,#168530); +#168528 = CARTESIAN_POINT('',(-1.4,-0.65,0.)); +#168529 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168530 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#168531 = ADVANCED_FACE('',(#168532),#168550,.F.); +#168532 = FACE_BOUND('',#168533,.F.); +#168533 = EDGE_LOOP('',(#168534,#168542,#168548,#168549)); +#168534 = ORIENTED_EDGE('',*,*,#168535,.F.); +#168535 = EDGE_CURVE('',#168536,#168481,#168538,.T.); +#168536 = VERTEX_POINT('',#168537); +#168537 = CARTESIAN_POINT('',(-1.,-0.85,0.)); +#168538 = LINE('',#168539,#168540); +#168539 = CARTESIAN_POINT('',(-1.,-0.85,0.)); +#168540 = VECTOR('',#168541,1.); +#168541 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168542 = ORIENTED_EDGE('',*,*,#168543,.T.); +#168543 = EDGE_CURVE('',#168536,#167941,#168544,.T.); +#168544 = LINE('',#168545,#168546); +#168545 = CARTESIAN_POINT('',(-1.,-0.85,0.)); +#168546 = VECTOR('',#168547,1.); +#168547 = DIRECTION('',(0.,0.,1.)); +#168548 = ORIENTED_EDGE('',*,*,#167940,.F.); +#168549 = ORIENTED_EDGE('',*,*,#168490,.F.); +#168550 = PLANE('',#168551); +#168551 = AXIS2_PLACEMENT_3D('',#168552,#168553,#168554); +#168552 = CARTESIAN_POINT('',(-1.,-0.85,0.)); +#168553 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168554 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168555 = ADVANCED_FACE('',(#168556),#168567,.F.); +#168556 = FACE_BOUND('',#168557,.F.); +#168557 = EDGE_LOOP('',(#168558,#168564,#168565,#168566)); +#168558 = ORIENTED_EDGE('',*,*,#168559,.F.); +#168559 = EDGE_CURVE('',#168512,#168536,#168560,.T.); +#168560 = LINE('',#168561,#168562); +#168561 = CARTESIAN_POINT('',(-1.4,-0.85,0.)); +#168562 = VECTOR('',#168563,1.); +#168563 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168564 = ORIENTED_EDGE('',*,*,#168521,.T.); +#168565 = ORIENTED_EDGE('',*,*,#167948,.F.); +#168566 = ORIENTED_EDGE('',*,*,#168543,.F.); +#168567 = PLANE('',#168568); +#168568 = AXIS2_PLACEMENT_3D('',#168569,#168570,#168571); +#168569 = CARTESIAN_POINT('',(-1.4,-0.85,0.)); +#168570 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168571 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#168572 = ADVANCED_FACE('',(#168573),#168598,.F.); +#168573 = FACE_BOUND('',#168574,.F.); +#168574 = EDGE_LOOP('',(#168575,#168585,#168591,#168592)); +#168575 = ORIENTED_EDGE('',*,*,#168576,.F.); +#168576 = EDGE_CURVE('',#168577,#168579,#168581,.T.); +#168577 = VERTEX_POINT('',#168578); +#168578 = CARTESIAN_POINT('',(0.1,-0.75,0.)); +#168579 = VERTEX_POINT('',#168580); +#168580 = CARTESIAN_POINT('',(-0.1,-0.75,0.)); +#168581 = LINE('',#168582,#168583); +#168582 = CARTESIAN_POINT('',(0.1,-0.75,0.)); +#168583 = VECTOR('',#168584,1.); +#168584 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168585 = ORIENTED_EDGE('',*,*,#168586,.T.); +#168586 = EDGE_CURVE('',#168577,#167967,#168587,.T.); +#168587 = LINE('',#168588,#168589); +#168588 = CARTESIAN_POINT('',(0.1,-0.75,0.)); +#168589 = VECTOR('',#168590,1.); +#168590 = DIRECTION('',(0.,0.,1.)); +#168591 = ORIENTED_EDGE('',*,*,#167964,.F.); +#168592 = ORIENTED_EDGE('',*,*,#168593,.F.); +#168593 = EDGE_CURVE('',#168579,#167965,#168594,.T.); +#168594 = LINE('',#168595,#168596); +#168595 = CARTESIAN_POINT('',(-0.1,-0.75,0.)); +#168596 = VECTOR('',#168597,1.); +#168597 = DIRECTION('',(0.,0.,1.)); +#168598 = PLANE('',#168599); +#168599 = AXIS2_PLACEMENT_3D('',#168600,#168601,#168602); +#168600 = CARTESIAN_POINT('',(0.1,-0.75,0.)); +#168601 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168602 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168603 = ADVANCED_FACE('',(#168604),#168622,.F.); +#168604 = FACE_BOUND('',#168605,.F.); +#168605 = EDGE_LOOP('',(#168606,#168614,#168615,#168616)); +#168606 = ORIENTED_EDGE('',*,*,#168607,.F.); +#168607 = EDGE_CURVE('',#168579,#168608,#168610,.T.); +#168608 = VERTEX_POINT('',#168609); +#168609 = CARTESIAN_POINT('',(-0.1,-1.15,0.)); +#168610 = LINE('',#168611,#168612); +#168611 = CARTESIAN_POINT('',(-0.1,-0.75,0.)); +#168612 = VECTOR('',#168613,1.); +#168613 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168614 = ORIENTED_EDGE('',*,*,#168593,.T.); +#168615 = ORIENTED_EDGE('',*,*,#167990,.F.); +#168616 = ORIENTED_EDGE('',*,*,#168617,.F.); +#168617 = EDGE_CURVE('',#168608,#167983,#168618,.T.); +#168618 = LINE('',#168619,#168620); +#168619 = CARTESIAN_POINT('',(-0.1,-1.15,0.)); +#168620 = VECTOR('',#168621,1.); +#168621 = DIRECTION('',(0.,0.,1.)); +#168622 = PLANE('',#168623); +#168623 = AXIS2_PLACEMENT_3D('',#168624,#168625,#168626); +#168624 = CARTESIAN_POINT('',(-0.1,-0.75,0.)); +#168625 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168626 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168627 = ADVANCED_FACE('',(#168628),#168646,.F.); +#168628 = FACE_BOUND('',#168629,.F.); +#168629 = EDGE_LOOP('',(#168630,#168638,#168644,#168645)); +#168630 = ORIENTED_EDGE('',*,*,#168631,.F.); +#168631 = EDGE_CURVE('',#168632,#168577,#168634,.T.); +#168632 = VERTEX_POINT('',#168633); +#168633 = CARTESIAN_POINT('',(0.1,-1.15,0.)); +#168634 = LINE('',#168635,#168636); +#168635 = CARTESIAN_POINT('',(0.1,-1.15,0.)); +#168636 = VECTOR('',#168637,1.); +#168637 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168638 = ORIENTED_EDGE('',*,*,#168639,.T.); +#168639 = EDGE_CURVE('',#168632,#167975,#168640,.T.); +#168640 = LINE('',#168641,#168642); +#168641 = CARTESIAN_POINT('',(0.1,-1.15,0.)); +#168642 = VECTOR('',#168643,1.); +#168643 = DIRECTION('',(0.,0.,1.)); +#168644 = ORIENTED_EDGE('',*,*,#167974,.F.); +#168645 = ORIENTED_EDGE('',*,*,#168586,.F.); +#168646 = PLANE('',#168647); +#168647 = AXIS2_PLACEMENT_3D('',#168648,#168649,#168650); +#168648 = CARTESIAN_POINT('',(0.1,-1.15,0.)); +#168649 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168650 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168651 = ADVANCED_FACE('',(#168652),#168663,.F.); +#168652 = FACE_BOUND('',#168653,.F.); +#168653 = EDGE_LOOP('',(#168654,#168660,#168661,#168662)); +#168654 = ORIENTED_EDGE('',*,*,#168655,.F.); +#168655 = EDGE_CURVE('',#168608,#168632,#168656,.T.); +#168656 = LINE('',#168657,#168658); +#168657 = CARTESIAN_POINT('',(-0.1,-1.15,0.)); +#168658 = VECTOR('',#168659,1.); +#168659 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168660 = ORIENTED_EDGE('',*,*,#168617,.T.); +#168661 = ORIENTED_EDGE('',*,*,#167982,.F.); +#168662 = ORIENTED_EDGE('',*,*,#168639,.F.); +#168663 = PLANE('',#168664); +#168664 = AXIS2_PLACEMENT_3D('',#168665,#168666,#168667); +#168665 = CARTESIAN_POINT('',(-0.1,-1.15,0.)); +#168666 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168667 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168668 = ADVANCED_FACE('',(#168669),#168694,.F.); +#168669 = FACE_BOUND('',#168670,.F.); +#168670 = EDGE_LOOP('',(#168671,#168681,#168687,#168688)); +#168671 = ORIENTED_EDGE('',*,*,#168672,.F.); +#168672 = EDGE_CURVE('',#168673,#168675,#168677,.T.); +#168673 = VERTEX_POINT('',#168674); +#168674 = CARTESIAN_POINT('',(-0.4,-0.75,0.)); +#168675 = VERTEX_POINT('',#168676); +#168676 = CARTESIAN_POINT('',(-0.6,-0.75,0.)); +#168677 = LINE('',#168678,#168679); +#168678 = CARTESIAN_POINT('',(-0.4,-0.75,0.)); +#168679 = VECTOR('',#168680,1.); +#168680 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168681 = ORIENTED_EDGE('',*,*,#168682,.T.); +#168682 = EDGE_CURVE('',#168673,#168001,#168683,.T.); +#168683 = LINE('',#168684,#168685); +#168684 = CARTESIAN_POINT('',(-0.4,-0.75,0.)); +#168685 = VECTOR('',#168686,1.); +#168686 = DIRECTION('',(0.,0.,1.)); +#168687 = ORIENTED_EDGE('',*,*,#167998,.F.); +#168688 = ORIENTED_EDGE('',*,*,#168689,.F.); +#168689 = EDGE_CURVE('',#168675,#167999,#168690,.T.); +#168690 = LINE('',#168691,#168692); +#168691 = CARTESIAN_POINT('',(-0.6,-0.75,0.)); +#168692 = VECTOR('',#168693,1.); +#168693 = DIRECTION('',(0.,0.,1.)); +#168694 = PLANE('',#168695); +#168695 = AXIS2_PLACEMENT_3D('',#168696,#168697,#168698); +#168696 = CARTESIAN_POINT('',(-0.4,-0.75,0.)); +#168697 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168698 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168699 = ADVANCED_FACE('',(#168700),#168718,.F.); +#168700 = FACE_BOUND('',#168701,.F.); +#168701 = EDGE_LOOP('',(#168702,#168710,#168711,#168712)); +#168702 = ORIENTED_EDGE('',*,*,#168703,.F.); +#168703 = EDGE_CURVE('',#168675,#168704,#168706,.T.); +#168704 = VERTEX_POINT('',#168705); +#168705 = CARTESIAN_POINT('',(-0.6,-1.15,0.)); +#168706 = LINE('',#168707,#168708); +#168707 = CARTESIAN_POINT('',(-0.6,-0.75,0.)); +#168708 = VECTOR('',#168709,1.); +#168709 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168710 = ORIENTED_EDGE('',*,*,#168689,.T.); +#168711 = ORIENTED_EDGE('',*,*,#168024,.F.); +#168712 = ORIENTED_EDGE('',*,*,#168713,.F.); +#168713 = EDGE_CURVE('',#168704,#168017,#168714,.T.); +#168714 = LINE('',#168715,#168716); +#168715 = CARTESIAN_POINT('',(-0.6,-1.15,0.)); +#168716 = VECTOR('',#168717,1.); +#168717 = DIRECTION('',(0.,0.,1.)); +#168718 = PLANE('',#168719); +#168719 = AXIS2_PLACEMENT_3D('',#168720,#168721,#168722); +#168720 = CARTESIAN_POINT('',(-0.6,-0.75,0.)); +#168721 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168722 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168723 = ADVANCED_FACE('',(#168724),#168742,.F.); +#168724 = FACE_BOUND('',#168725,.F.); +#168725 = EDGE_LOOP('',(#168726,#168734,#168740,#168741)); +#168726 = ORIENTED_EDGE('',*,*,#168727,.F.); +#168727 = EDGE_CURVE('',#168728,#168673,#168730,.T.); +#168728 = VERTEX_POINT('',#168729); +#168729 = CARTESIAN_POINT('',(-0.4,-1.15,0.)); +#168730 = LINE('',#168731,#168732); +#168731 = CARTESIAN_POINT('',(-0.4,-1.15,0.)); +#168732 = VECTOR('',#168733,1.); +#168733 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168734 = ORIENTED_EDGE('',*,*,#168735,.T.); +#168735 = EDGE_CURVE('',#168728,#168009,#168736,.T.); +#168736 = LINE('',#168737,#168738); +#168737 = CARTESIAN_POINT('',(-0.4,-1.15,0.)); +#168738 = VECTOR('',#168739,1.); +#168739 = DIRECTION('',(0.,0.,1.)); +#168740 = ORIENTED_EDGE('',*,*,#168008,.F.); +#168741 = ORIENTED_EDGE('',*,*,#168682,.F.); +#168742 = PLANE('',#168743); +#168743 = AXIS2_PLACEMENT_3D('',#168744,#168745,#168746); +#168744 = CARTESIAN_POINT('',(-0.4,-1.15,0.)); +#168745 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168746 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168747 = ADVANCED_FACE('',(#168748),#168759,.F.); +#168748 = FACE_BOUND('',#168749,.F.); +#168749 = EDGE_LOOP('',(#168750,#168756,#168757,#168758)); +#168750 = ORIENTED_EDGE('',*,*,#168751,.F.); +#168751 = EDGE_CURVE('',#168704,#168728,#168752,.T.); +#168752 = LINE('',#168753,#168754); +#168753 = CARTESIAN_POINT('',(-0.6,-1.15,0.)); +#168754 = VECTOR('',#168755,1.); +#168755 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168756 = ORIENTED_EDGE('',*,*,#168713,.T.); +#168757 = ORIENTED_EDGE('',*,*,#168016,.F.); +#168758 = ORIENTED_EDGE('',*,*,#168735,.F.); +#168759 = PLANE('',#168760); +#168760 = AXIS2_PLACEMENT_3D('',#168761,#168762,#168763); +#168761 = CARTESIAN_POINT('',(-0.6,-1.15,0.)); +#168762 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168763 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168764 = ADVANCED_FACE('',(#168765),#168790,.F.); +#168765 = FACE_BOUND('',#168766,.F.); +#168766 = EDGE_LOOP('',(#168767,#168777,#168783,#168784)); +#168767 = ORIENTED_EDGE('',*,*,#168768,.F.); +#168768 = EDGE_CURVE('',#168769,#168771,#168773,.T.); +#168769 = VERTEX_POINT('',#168770); +#168770 = CARTESIAN_POINT('',(1.,-0.65,0.)); +#168771 = VERTEX_POINT('',#168772); +#168772 = CARTESIAN_POINT('',(1.,-0.85,0.)); +#168773 = LINE('',#168774,#168775); +#168774 = CARTESIAN_POINT('',(1.,-0.65,0.)); +#168775 = VECTOR('',#168776,1.); +#168776 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168777 = ORIENTED_EDGE('',*,*,#168778,.T.); +#168778 = EDGE_CURVE('',#168769,#168035,#168779,.T.); +#168779 = LINE('',#168780,#168781); +#168780 = CARTESIAN_POINT('',(1.,-0.65,0.)); +#168781 = VECTOR('',#168782,1.); +#168782 = DIRECTION('',(0.,0.,1.)); +#168783 = ORIENTED_EDGE('',*,*,#168032,.F.); +#168784 = ORIENTED_EDGE('',*,*,#168785,.F.); +#168785 = EDGE_CURVE('',#168771,#168033,#168786,.T.); +#168786 = LINE('',#168787,#168788); +#168787 = CARTESIAN_POINT('',(1.,-0.85,0.)); +#168788 = VECTOR('',#168789,1.); +#168789 = DIRECTION('',(0.,0.,1.)); +#168790 = PLANE('',#168791); +#168791 = AXIS2_PLACEMENT_3D('',#168792,#168793,#168794); +#168792 = CARTESIAN_POINT('',(1.,-0.65,0.)); +#168793 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168794 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168795 = ADVANCED_FACE('',(#168796),#168814,.F.); +#168796 = FACE_BOUND('',#168797,.F.); +#168797 = EDGE_LOOP('',(#168798,#168806,#168807,#168808)); +#168798 = ORIENTED_EDGE('',*,*,#168799,.F.); +#168799 = EDGE_CURVE('',#168771,#168800,#168802,.T.); +#168800 = VERTEX_POINT('',#168801); +#168801 = CARTESIAN_POINT('',(1.4,-0.85,0.)); +#168802 = LINE('',#168803,#168804); +#168803 = CARTESIAN_POINT('',(1.,-0.85,0.)); +#168804 = VECTOR('',#168805,1.); +#168805 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168806 = ORIENTED_EDGE('',*,*,#168785,.T.); +#168807 = ORIENTED_EDGE('',*,*,#168058,.F.); +#168808 = ORIENTED_EDGE('',*,*,#168809,.F.); +#168809 = EDGE_CURVE('',#168800,#168051,#168810,.T.); +#168810 = LINE('',#168811,#168812); +#168811 = CARTESIAN_POINT('',(1.4,-0.85,0.)); +#168812 = VECTOR('',#168813,1.); +#168813 = DIRECTION('',(0.,0.,1.)); +#168814 = PLANE('',#168815); +#168815 = AXIS2_PLACEMENT_3D('',#168816,#168817,#168818); +#168816 = CARTESIAN_POINT('',(1.,-0.85,0.)); +#168817 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168818 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#168819 = ADVANCED_FACE('',(#168820),#168838,.F.); +#168820 = FACE_BOUND('',#168821,.F.); +#168821 = EDGE_LOOP('',(#168822,#168830,#168836,#168837)); +#168822 = ORIENTED_EDGE('',*,*,#168823,.F.); +#168823 = EDGE_CURVE('',#168824,#168769,#168826,.T.); +#168824 = VERTEX_POINT('',#168825); +#168825 = CARTESIAN_POINT('',(1.4,-0.65,0.)); +#168826 = LINE('',#168827,#168828); +#168827 = CARTESIAN_POINT('',(1.4,-0.65,0.)); +#168828 = VECTOR('',#168829,1.); +#168829 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168830 = ORIENTED_EDGE('',*,*,#168831,.T.); +#168831 = EDGE_CURVE('',#168824,#168043,#168832,.T.); +#168832 = LINE('',#168833,#168834); +#168833 = CARTESIAN_POINT('',(1.4,-0.65,0.)); +#168834 = VECTOR('',#168835,1.); +#168835 = DIRECTION('',(0.,0.,1.)); +#168836 = ORIENTED_EDGE('',*,*,#168042,.F.); +#168837 = ORIENTED_EDGE('',*,*,#168778,.F.); +#168838 = PLANE('',#168839); +#168839 = AXIS2_PLACEMENT_3D('',#168840,#168841,#168842); +#168840 = CARTESIAN_POINT('',(1.4,-0.65,0.)); +#168841 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#168842 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168843 = ADVANCED_FACE('',(#168844),#168855,.F.); +#168844 = FACE_BOUND('',#168845,.F.); +#168845 = EDGE_LOOP('',(#168846,#168852,#168853,#168854)); +#168846 = ORIENTED_EDGE('',*,*,#168847,.F.); +#168847 = EDGE_CURVE('',#168800,#168824,#168848,.T.); +#168848 = LINE('',#168849,#168850); +#168849 = CARTESIAN_POINT('',(1.4,-0.85,0.)); +#168850 = VECTOR('',#168851,1.); +#168851 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168852 = ORIENTED_EDGE('',*,*,#168809,.T.); +#168853 = ORIENTED_EDGE('',*,*,#168050,.F.); +#168854 = ORIENTED_EDGE('',*,*,#168831,.F.); +#168855 = PLANE('',#168856); +#168856 = AXIS2_PLACEMENT_3D('',#168857,#168858,#168859); +#168857 = CARTESIAN_POINT('',(1.4,-0.85,0.)); +#168858 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#168859 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#168860 = ADVANCED_FACE('',(#168861),#168886,.F.); +#168861 = FACE_BOUND('',#168862,.F.); +#168862 = EDGE_LOOP('',(#168863,#168873,#168879,#168880)); +#168863 = ORIENTED_EDGE('',*,*,#168864,.F.); +#168864 = EDGE_CURVE('',#168865,#168867,#168869,.T.); +#168865 = VERTEX_POINT('',#168866); +#168866 = CARTESIAN_POINT('',(0.6,-0.75,0.)); +#168867 = VERTEX_POINT('',#168868); +#168868 = CARTESIAN_POINT('',(0.4,-0.75,0.)); +#168869 = LINE('',#168870,#168871); +#168870 = CARTESIAN_POINT('',(0.6,-0.75,0.)); +#168871 = VECTOR('',#168872,1.); +#168872 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168873 = ORIENTED_EDGE('',*,*,#168874,.T.); +#168874 = EDGE_CURVE('',#168865,#168069,#168875,.T.); +#168875 = LINE('',#168876,#168877); +#168876 = CARTESIAN_POINT('',(0.6,-0.75,0.)); +#168877 = VECTOR('',#168878,1.); +#168878 = DIRECTION('',(0.,0.,1.)); +#168879 = ORIENTED_EDGE('',*,*,#168066,.F.); +#168880 = ORIENTED_EDGE('',*,*,#168881,.F.); +#168881 = EDGE_CURVE('',#168867,#168067,#168882,.T.); +#168882 = LINE('',#168883,#168884); +#168883 = CARTESIAN_POINT('',(0.4,-0.75,0.)); +#168884 = VECTOR('',#168885,1.); +#168885 = DIRECTION('',(0.,0.,1.)); +#168886 = PLANE('',#168887); +#168887 = AXIS2_PLACEMENT_3D('',#168888,#168889,#168890); +#168888 = CARTESIAN_POINT('',(0.6,-0.75,0.)); +#168889 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168890 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168891 = ADVANCED_FACE('',(#168892),#168910,.F.); +#168892 = FACE_BOUND('',#168893,.F.); +#168893 = EDGE_LOOP('',(#168894,#168902,#168903,#168904)); +#168894 = ORIENTED_EDGE('',*,*,#168895,.F.); +#168895 = EDGE_CURVE('',#168867,#168896,#168898,.T.); +#168896 = VERTEX_POINT('',#168897); +#168897 = CARTESIAN_POINT('',(0.4,-1.15,0.)); +#168898 = LINE('',#168899,#168900); +#168899 = CARTESIAN_POINT('',(0.4,-0.75,0.)); +#168900 = VECTOR('',#168901,1.); +#168901 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168902 = ORIENTED_EDGE('',*,*,#168881,.T.); +#168903 = ORIENTED_EDGE('',*,*,#168092,.F.); +#168904 = ORIENTED_EDGE('',*,*,#168905,.F.); +#168905 = EDGE_CURVE('',#168896,#168085,#168906,.T.); +#168906 = LINE('',#168907,#168908); +#168907 = CARTESIAN_POINT('',(0.4,-1.15,0.)); +#168908 = VECTOR('',#168909,1.); +#168909 = DIRECTION('',(0.,0.,1.)); +#168910 = PLANE('',#168911); +#168911 = AXIS2_PLACEMENT_3D('',#168912,#168913,#168914); +#168912 = CARTESIAN_POINT('',(0.4,-0.75,0.)); +#168913 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168914 = DIRECTION('',(-5.665538897648E-16,-1.,0.)); +#168915 = ADVANCED_FACE('',(#168916),#168934,.F.); +#168916 = FACE_BOUND('',#168917,.F.); +#168917 = EDGE_LOOP('',(#168918,#168926,#168932,#168933)); +#168918 = ORIENTED_EDGE('',*,*,#168919,.F.); +#168919 = EDGE_CURVE('',#168920,#168865,#168922,.T.); +#168920 = VERTEX_POINT('',#168921); +#168921 = CARTESIAN_POINT('',(0.6,-1.15,0.)); +#168922 = LINE('',#168923,#168924); +#168923 = CARTESIAN_POINT('',(0.6,-1.15,0.)); +#168924 = VECTOR('',#168925,1.); +#168925 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168926 = ORIENTED_EDGE('',*,*,#168927,.T.); +#168927 = EDGE_CURVE('',#168920,#168077,#168928,.T.); +#168928 = LINE('',#168929,#168930); +#168929 = CARTESIAN_POINT('',(0.6,-1.15,0.)); +#168930 = VECTOR('',#168931,1.); +#168931 = DIRECTION('',(0.,0.,1.)); +#168932 = ORIENTED_EDGE('',*,*,#168076,.F.); +#168933 = ORIENTED_EDGE('',*,*,#168874,.F.); +#168934 = PLANE('',#168935); +#168935 = AXIS2_PLACEMENT_3D('',#168936,#168937,#168938); +#168936 = CARTESIAN_POINT('',(0.6,-1.15,0.)); +#168937 = DIRECTION('',(-1.,5.665538897648E-16,0.)); +#168938 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168939 = ADVANCED_FACE('',(#168940),#168951,.F.); +#168940 = FACE_BOUND('',#168941,.F.); +#168941 = EDGE_LOOP('',(#168942,#168948,#168949,#168950)); +#168942 = ORIENTED_EDGE('',*,*,#168943,.F.); +#168943 = EDGE_CURVE('',#168896,#168920,#168944,.T.); +#168944 = LINE('',#168945,#168946); +#168945 = CARTESIAN_POINT('',(0.4,-1.15,0.)); +#168946 = VECTOR('',#168947,1.); +#168947 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168948 = ORIENTED_EDGE('',*,*,#168905,.T.); +#168949 = ORIENTED_EDGE('',*,*,#168084,.F.); +#168950 = ORIENTED_EDGE('',*,*,#168927,.F.); +#168951 = PLANE('',#168952); +#168952 = AXIS2_PLACEMENT_3D('',#168953,#168954,#168955); +#168953 = CARTESIAN_POINT('',(0.4,-1.15,0.)); +#168954 = DIRECTION('',(5.665538897648E-16,1.,0.)); +#168955 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#168956 = ADVANCED_FACE('',(#168957),#168982,.F.); +#168957 = FACE_BOUND('',#168958,.F.); +#168958 = EDGE_LOOP('',(#168959,#168969,#168975,#168976)); +#168959 = ORIENTED_EDGE('',*,*,#168960,.F.); +#168960 = EDGE_CURVE('',#168961,#168963,#168965,.T.); +#168961 = VERTEX_POINT('',#168962); +#168962 = CARTESIAN_POINT('',(-1.,0.15,0.)); +#168963 = VERTEX_POINT('',#168964); +#168964 = CARTESIAN_POINT('',(-1.,0.35,0.)); +#168965 = LINE('',#168966,#168967); +#168966 = CARTESIAN_POINT('',(-1.,0.15,0.)); +#168967 = VECTOR('',#168968,1.); +#168968 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168969 = ORIENTED_EDGE('',*,*,#168970,.T.); +#168970 = EDGE_CURVE('',#168961,#168103,#168971,.T.); +#168971 = LINE('',#168972,#168973); +#168972 = CARTESIAN_POINT('',(-1.,0.15,0.)); +#168973 = VECTOR('',#168974,1.); +#168974 = DIRECTION('',(0.,0.,1.)); +#168975 = ORIENTED_EDGE('',*,*,#168100,.F.); +#168976 = ORIENTED_EDGE('',*,*,#168977,.F.); +#168977 = EDGE_CURVE('',#168963,#168101,#168978,.T.); +#168978 = LINE('',#168979,#168980); +#168979 = CARTESIAN_POINT('',(-1.,0.35,0.)); +#168980 = VECTOR('',#168981,1.); +#168981 = DIRECTION('',(0.,0.,1.)); +#168982 = PLANE('',#168983); +#168983 = AXIS2_PLACEMENT_3D('',#168984,#168985,#168986); +#168984 = CARTESIAN_POINT('',(-1.,0.15,0.)); +#168985 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168986 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#168987 = ADVANCED_FACE('',(#168988),#169006,.F.); +#168988 = FACE_BOUND('',#168989,.F.); +#168989 = EDGE_LOOP('',(#168990,#168998,#168999,#169000)); +#168990 = ORIENTED_EDGE('',*,*,#168991,.F.); +#168991 = EDGE_CURVE('',#168963,#168992,#168994,.T.); +#168992 = VERTEX_POINT('',#168993); +#168993 = CARTESIAN_POINT('',(-1.4,0.35,0.)); +#168994 = LINE('',#168995,#168996); +#168995 = CARTESIAN_POINT('',(-1.,0.35,0.)); +#168996 = VECTOR('',#168997,1.); +#168997 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#168998 = ORIENTED_EDGE('',*,*,#168977,.T.); +#168999 = ORIENTED_EDGE('',*,*,#168126,.F.); +#169000 = ORIENTED_EDGE('',*,*,#169001,.F.); +#169001 = EDGE_CURVE('',#168992,#168119,#169002,.T.); +#169002 = LINE('',#169003,#169004); +#169003 = CARTESIAN_POINT('',(-1.4,0.35,0.)); +#169004 = VECTOR('',#169005,1.); +#169005 = DIRECTION('',(0.,0.,1.)); +#169006 = PLANE('',#169007); +#169007 = AXIS2_PLACEMENT_3D('',#169008,#169009,#169010); +#169008 = CARTESIAN_POINT('',(-1.,0.35,0.)); +#169009 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169010 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169011 = ADVANCED_FACE('',(#169012),#169030,.F.); +#169012 = FACE_BOUND('',#169013,.F.); +#169013 = EDGE_LOOP('',(#169014,#169022,#169028,#169029)); +#169014 = ORIENTED_EDGE('',*,*,#169015,.F.); +#169015 = EDGE_CURVE('',#169016,#168961,#169018,.T.); +#169016 = VERTEX_POINT('',#169017); +#169017 = CARTESIAN_POINT('',(-1.4,0.15,0.)); +#169018 = LINE('',#169019,#169020); +#169019 = CARTESIAN_POINT('',(-1.4,0.15,0.)); +#169020 = VECTOR('',#169021,1.); +#169021 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169022 = ORIENTED_EDGE('',*,*,#169023,.T.); +#169023 = EDGE_CURVE('',#169016,#168111,#169024,.T.); +#169024 = LINE('',#169025,#169026); +#169025 = CARTESIAN_POINT('',(-1.4,0.15,0.)); +#169026 = VECTOR('',#169027,1.); +#169027 = DIRECTION('',(0.,0.,1.)); +#169028 = ORIENTED_EDGE('',*,*,#168110,.F.); +#169029 = ORIENTED_EDGE('',*,*,#168970,.F.); +#169030 = PLANE('',#169031); +#169031 = AXIS2_PLACEMENT_3D('',#169032,#169033,#169034); +#169032 = CARTESIAN_POINT('',(-1.4,0.15,0.)); +#169033 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169034 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169035 = ADVANCED_FACE('',(#169036),#169047,.F.); +#169036 = FACE_BOUND('',#169037,.F.); +#169037 = EDGE_LOOP('',(#169038,#169044,#169045,#169046)); +#169038 = ORIENTED_EDGE('',*,*,#169039,.F.); +#169039 = EDGE_CURVE('',#168992,#169016,#169040,.T.); +#169040 = LINE('',#169041,#169042); +#169041 = CARTESIAN_POINT('',(-1.4,0.35,0.)); +#169042 = VECTOR('',#169043,1.); +#169043 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169044 = ORIENTED_EDGE('',*,*,#169001,.T.); +#169045 = ORIENTED_EDGE('',*,*,#168118,.F.); +#169046 = ORIENTED_EDGE('',*,*,#169023,.F.); +#169047 = PLANE('',#169048); +#169048 = AXIS2_PLACEMENT_3D('',#169049,#169050,#169051); +#169049 = CARTESIAN_POINT('',(-1.4,0.35,0.)); +#169050 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169051 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169052 = ADVANCED_FACE('',(#169053),#169078,.F.); +#169053 = FACE_BOUND('',#169054,.F.); +#169054 = EDGE_LOOP('',(#169055,#169065,#169071,#169072)); +#169055 = ORIENTED_EDGE('',*,*,#169056,.F.); +#169056 = EDGE_CURVE('',#169057,#169059,#169061,.T.); +#169057 = VERTEX_POINT('',#169058); +#169058 = CARTESIAN_POINT('',(-1.,-0.35,0.)); +#169059 = VERTEX_POINT('',#169060); +#169060 = CARTESIAN_POINT('',(-1.,-0.15,0.)); +#169061 = LINE('',#169062,#169063); +#169062 = CARTESIAN_POINT('',(-1.,-0.35,0.)); +#169063 = VECTOR('',#169064,1.); +#169064 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169065 = ORIENTED_EDGE('',*,*,#169066,.T.); +#169066 = EDGE_CURVE('',#169057,#168137,#169067,.T.); +#169067 = LINE('',#169068,#169069); +#169068 = CARTESIAN_POINT('',(-1.,-0.35,0.)); +#169069 = VECTOR('',#169070,1.); +#169070 = DIRECTION('',(0.,0.,1.)); +#169071 = ORIENTED_EDGE('',*,*,#168134,.F.); +#169072 = ORIENTED_EDGE('',*,*,#169073,.F.); +#169073 = EDGE_CURVE('',#169059,#168135,#169074,.T.); +#169074 = LINE('',#169075,#169076); +#169075 = CARTESIAN_POINT('',(-1.,-0.15,0.)); +#169076 = VECTOR('',#169077,1.); +#169077 = DIRECTION('',(0.,0.,1.)); +#169078 = PLANE('',#169079); +#169079 = AXIS2_PLACEMENT_3D('',#169080,#169081,#169082); +#169080 = CARTESIAN_POINT('',(-1.,-0.35,0.)); +#169081 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169082 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169083 = ADVANCED_FACE('',(#169084),#169102,.F.); +#169084 = FACE_BOUND('',#169085,.F.); +#169085 = EDGE_LOOP('',(#169086,#169094,#169095,#169096)); +#169086 = ORIENTED_EDGE('',*,*,#169087,.F.); +#169087 = EDGE_CURVE('',#169059,#169088,#169090,.T.); +#169088 = VERTEX_POINT('',#169089); +#169089 = CARTESIAN_POINT('',(-1.4,-0.15,0.)); +#169090 = LINE('',#169091,#169092); +#169091 = CARTESIAN_POINT('',(-1.,-0.15,0.)); +#169092 = VECTOR('',#169093,1.); +#169093 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169094 = ORIENTED_EDGE('',*,*,#169073,.T.); +#169095 = ORIENTED_EDGE('',*,*,#168160,.F.); +#169096 = ORIENTED_EDGE('',*,*,#169097,.F.); +#169097 = EDGE_CURVE('',#169088,#168153,#169098,.T.); +#169098 = LINE('',#169099,#169100); +#169099 = CARTESIAN_POINT('',(-1.4,-0.15,0.)); +#169100 = VECTOR('',#169101,1.); +#169101 = DIRECTION('',(0.,0.,1.)); +#169102 = PLANE('',#169103); +#169103 = AXIS2_PLACEMENT_3D('',#169104,#169105,#169106); +#169104 = CARTESIAN_POINT('',(-1.,-0.15,0.)); +#169105 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169106 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169107 = ADVANCED_FACE('',(#169108),#169126,.F.); +#169108 = FACE_BOUND('',#169109,.F.); +#169109 = EDGE_LOOP('',(#169110,#169118,#169124,#169125)); +#169110 = ORIENTED_EDGE('',*,*,#169111,.F.); +#169111 = EDGE_CURVE('',#169112,#169057,#169114,.T.); +#169112 = VERTEX_POINT('',#169113); +#169113 = CARTESIAN_POINT('',(-1.4,-0.35,0.)); +#169114 = LINE('',#169115,#169116); +#169115 = CARTESIAN_POINT('',(-1.4,-0.35,0.)); +#169116 = VECTOR('',#169117,1.); +#169117 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169118 = ORIENTED_EDGE('',*,*,#169119,.T.); +#169119 = EDGE_CURVE('',#169112,#168145,#169120,.T.); +#169120 = LINE('',#169121,#169122); +#169121 = CARTESIAN_POINT('',(-1.4,-0.35,0.)); +#169122 = VECTOR('',#169123,1.); +#169123 = DIRECTION('',(0.,0.,1.)); +#169124 = ORIENTED_EDGE('',*,*,#168144,.F.); +#169125 = ORIENTED_EDGE('',*,*,#169066,.F.); +#169126 = PLANE('',#169127); +#169127 = AXIS2_PLACEMENT_3D('',#169128,#169129,#169130); +#169128 = CARTESIAN_POINT('',(-1.4,-0.35,0.)); +#169129 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169130 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169131 = ADVANCED_FACE('',(#169132),#169143,.F.); +#169132 = FACE_BOUND('',#169133,.F.); +#169133 = EDGE_LOOP('',(#169134,#169140,#169141,#169142)); +#169134 = ORIENTED_EDGE('',*,*,#169135,.F.); +#169135 = EDGE_CURVE('',#169088,#169112,#169136,.T.); +#169136 = LINE('',#169137,#169138); +#169137 = CARTESIAN_POINT('',(-1.4,-0.15,0.)); +#169138 = VECTOR('',#169139,1.); +#169139 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169140 = ORIENTED_EDGE('',*,*,#169097,.T.); +#169141 = ORIENTED_EDGE('',*,*,#168152,.F.); +#169142 = ORIENTED_EDGE('',*,*,#169119,.F.); +#169143 = PLANE('',#169144); +#169144 = AXIS2_PLACEMENT_3D('',#169145,#169146,#169147); +#169145 = CARTESIAN_POINT('',(-1.4,-0.15,0.)); +#169146 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169147 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169148 = ADVANCED_FACE('',(#169149),#169174,.F.); +#169149 = FACE_BOUND('',#169150,.F.); +#169150 = EDGE_LOOP('',(#169151,#169161,#169167,#169168)); +#169151 = ORIENTED_EDGE('',*,*,#169152,.F.); +#169152 = EDGE_CURVE('',#169153,#169155,#169157,.T.); +#169153 = VERTEX_POINT('',#169154); +#169154 = CARTESIAN_POINT('',(1.4,-0.15,0.)); +#169155 = VERTEX_POINT('',#169156); +#169156 = CARTESIAN_POINT('',(1.,-0.15,0.)); +#169157 = LINE('',#169158,#169159); +#169158 = CARTESIAN_POINT('',(1.4,-0.15,0.)); +#169159 = VECTOR('',#169160,1.); +#169160 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169161 = ORIENTED_EDGE('',*,*,#169162,.T.); +#169162 = EDGE_CURVE('',#169153,#168171,#169163,.T.); +#169163 = LINE('',#169164,#169165); +#169164 = CARTESIAN_POINT('',(1.4,-0.15,0.)); +#169165 = VECTOR('',#169166,1.); +#169166 = DIRECTION('',(0.,0.,1.)); +#169167 = ORIENTED_EDGE('',*,*,#168168,.F.); +#169168 = ORIENTED_EDGE('',*,*,#169169,.F.); +#169169 = EDGE_CURVE('',#169155,#168169,#169170,.T.); +#169170 = LINE('',#169171,#169172); +#169171 = CARTESIAN_POINT('',(1.,-0.15,0.)); +#169172 = VECTOR('',#169173,1.); +#169173 = DIRECTION('',(0.,0.,1.)); +#169174 = PLANE('',#169175); +#169175 = AXIS2_PLACEMENT_3D('',#169176,#169177,#169178); +#169176 = CARTESIAN_POINT('',(1.4,-0.15,0.)); +#169177 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169178 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169179 = ADVANCED_FACE('',(#169180),#169198,.F.); +#169180 = FACE_BOUND('',#169181,.F.); +#169181 = EDGE_LOOP('',(#169182,#169190,#169191,#169192)); +#169182 = ORIENTED_EDGE('',*,*,#169183,.F.); +#169183 = EDGE_CURVE('',#169155,#169184,#169186,.T.); +#169184 = VERTEX_POINT('',#169185); +#169185 = CARTESIAN_POINT('',(1.,-0.35,0.)); +#169186 = LINE('',#169187,#169188); +#169187 = CARTESIAN_POINT('',(1.,-0.15,0.)); +#169188 = VECTOR('',#169189,1.); +#169189 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169190 = ORIENTED_EDGE('',*,*,#169169,.T.); +#169191 = ORIENTED_EDGE('',*,*,#168194,.F.); +#169192 = ORIENTED_EDGE('',*,*,#169193,.F.); +#169193 = EDGE_CURVE('',#169184,#168187,#169194,.T.); +#169194 = LINE('',#169195,#169196); +#169195 = CARTESIAN_POINT('',(1.,-0.35,0.)); +#169196 = VECTOR('',#169197,1.); +#169197 = DIRECTION('',(0.,0.,1.)); +#169198 = PLANE('',#169199); +#169199 = AXIS2_PLACEMENT_3D('',#169200,#169201,#169202); +#169200 = CARTESIAN_POINT('',(1.,-0.15,0.)); +#169201 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169202 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169203 = ADVANCED_FACE('',(#169204),#169222,.F.); +#169204 = FACE_BOUND('',#169205,.F.); +#169205 = EDGE_LOOP('',(#169206,#169214,#169220,#169221)); +#169206 = ORIENTED_EDGE('',*,*,#169207,.F.); +#169207 = EDGE_CURVE('',#169208,#169153,#169210,.T.); +#169208 = VERTEX_POINT('',#169209); +#169209 = CARTESIAN_POINT('',(1.4,-0.35,0.)); +#169210 = LINE('',#169211,#169212); +#169211 = CARTESIAN_POINT('',(1.4,-0.35,0.)); +#169212 = VECTOR('',#169213,1.); +#169213 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169214 = ORIENTED_EDGE('',*,*,#169215,.T.); +#169215 = EDGE_CURVE('',#169208,#168179,#169216,.T.); +#169216 = LINE('',#169217,#169218); +#169217 = CARTESIAN_POINT('',(1.4,-0.35,0.)); +#169218 = VECTOR('',#169219,1.); +#169219 = DIRECTION('',(0.,0.,1.)); +#169220 = ORIENTED_EDGE('',*,*,#168178,.F.); +#169221 = ORIENTED_EDGE('',*,*,#169162,.F.); +#169222 = PLANE('',#169223); +#169223 = AXIS2_PLACEMENT_3D('',#169224,#169225,#169226); +#169224 = CARTESIAN_POINT('',(1.4,-0.35,0.)); +#169225 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169226 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169227 = ADVANCED_FACE('',(#169228),#169239,.F.); +#169228 = FACE_BOUND('',#169229,.F.); +#169229 = EDGE_LOOP('',(#169230,#169236,#169237,#169238)); +#169230 = ORIENTED_EDGE('',*,*,#169231,.F.); +#169231 = EDGE_CURVE('',#169184,#169208,#169232,.T.); +#169232 = LINE('',#169233,#169234); +#169233 = CARTESIAN_POINT('',(1.,-0.35,0.)); +#169234 = VECTOR('',#169235,1.); +#169235 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169236 = ORIENTED_EDGE('',*,*,#169193,.T.); +#169237 = ORIENTED_EDGE('',*,*,#168186,.F.); +#169238 = ORIENTED_EDGE('',*,*,#169215,.F.); +#169239 = PLANE('',#169240); +#169240 = AXIS2_PLACEMENT_3D('',#169241,#169242,#169243); +#169241 = CARTESIAN_POINT('',(1.,-0.35,0.)); +#169242 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169243 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169244 = ADVANCED_FACE('',(#169245),#169270,.F.); +#169245 = FACE_BOUND('',#169246,.F.); +#169246 = EDGE_LOOP('',(#169247,#169257,#169263,#169264)); +#169247 = ORIENTED_EDGE('',*,*,#169248,.F.); +#169248 = EDGE_CURVE('',#169249,#169251,#169253,.T.); +#169249 = VERTEX_POINT('',#169250); +#169250 = CARTESIAN_POINT('',(1.,0.15,0.)); +#169251 = VERTEX_POINT('',#169252); +#169252 = CARTESIAN_POINT('',(1.4,0.15,0.)); +#169253 = LINE('',#169254,#169255); +#169254 = CARTESIAN_POINT('',(1.,0.15,0.)); +#169255 = VECTOR('',#169256,1.); +#169256 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169257 = ORIENTED_EDGE('',*,*,#169258,.T.); +#169258 = EDGE_CURVE('',#169249,#168205,#169259,.T.); +#169259 = LINE('',#169260,#169261); +#169260 = CARTESIAN_POINT('',(1.,0.15,0.)); +#169261 = VECTOR('',#169262,1.); +#169262 = DIRECTION('',(0.,0.,1.)); +#169263 = ORIENTED_EDGE('',*,*,#168202,.F.); +#169264 = ORIENTED_EDGE('',*,*,#169265,.F.); +#169265 = EDGE_CURVE('',#169251,#168203,#169266,.T.); +#169266 = LINE('',#169267,#169268); +#169267 = CARTESIAN_POINT('',(1.4,0.15,0.)); +#169268 = VECTOR('',#169269,1.); +#169269 = DIRECTION('',(0.,0.,1.)); +#169270 = PLANE('',#169271); +#169271 = AXIS2_PLACEMENT_3D('',#169272,#169273,#169274); +#169272 = CARTESIAN_POINT('',(1.,0.15,0.)); +#169273 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169274 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169275 = ADVANCED_FACE('',(#169276),#169294,.F.); +#169276 = FACE_BOUND('',#169277,.F.); +#169277 = EDGE_LOOP('',(#169278,#169286,#169287,#169288)); +#169278 = ORIENTED_EDGE('',*,*,#169279,.F.); +#169279 = EDGE_CURVE('',#169251,#169280,#169282,.T.); +#169280 = VERTEX_POINT('',#169281); +#169281 = CARTESIAN_POINT('',(1.4,0.35,0.)); +#169282 = LINE('',#169283,#169284); +#169283 = CARTESIAN_POINT('',(1.4,0.15,0.)); +#169284 = VECTOR('',#169285,1.); +#169285 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169286 = ORIENTED_EDGE('',*,*,#169265,.T.); +#169287 = ORIENTED_EDGE('',*,*,#168228,.F.); +#169288 = ORIENTED_EDGE('',*,*,#169289,.F.); +#169289 = EDGE_CURVE('',#169280,#168221,#169290,.T.); +#169290 = LINE('',#169291,#169292); +#169291 = CARTESIAN_POINT('',(1.4,0.35,0.)); +#169292 = VECTOR('',#169293,1.); +#169293 = DIRECTION('',(0.,0.,1.)); +#169294 = PLANE('',#169295); +#169295 = AXIS2_PLACEMENT_3D('',#169296,#169297,#169298); +#169296 = CARTESIAN_POINT('',(1.4,0.15,0.)); +#169297 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169298 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169299 = ADVANCED_FACE('',(#169300),#169318,.F.); +#169300 = FACE_BOUND('',#169301,.F.); +#169301 = EDGE_LOOP('',(#169302,#169310,#169316,#169317)); +#169302 = ORIENTED_EDGE('',*,*,#169303,.F.); +#169303 = EDGE_CURVE('',#169304,#169249,#169306,.T.); +#169304 = VERTEX_POINT('',#169305); +#169305 = CARTESIAN_POINT('',(1.,0.35,0.)); +#169306 = LINE('',#169307,#169308); +#169307 = CARTESIAN_POINT('',(1.,0.35,0.)); +#169308 = VECTOR('',#169309,1.); +#169309 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169310 = ORIENTED_EDGE('',*,*,#169311,.T.); +#169311 = EDGE_CURVE('',#169304,#168213,#169312,.T.); +#169312 = LINE('',#169313,#169314); +#169313 = CARTESIAN_POINT('',(1.,0.35,0.)); +#169314 = VECTOR('',#169315,1.); +#169315 = DIRECTION('',(0.,0.,1.)); +#169316 = ORIENTED_EDGE('',*,*,#168212,.F.); +#169317 = ORIENTED_EDGE('',*,*,#169258,.F.); +#169318 = PLANE('',#169319); +#169319 = AXIS2_PLACEMENT_3D('',#169320,#169321,#169322); +#169320 = CARTESIAN_POINT('',(1.,0.35,0.)); +#169321 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169322 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169323 = ADVANCED_FACE('',(#169324),#169335,.F.); +#169324 = FACE_BOUND('',#169325,.F.); +#169325 = EDGE_LOOP('',(#169326,#169332,#169333,#169334)); +#169326 = ORIENTED_EDGE('',*,*,#169327,.F.); +#169327 = EDGE_CURVE('',#169280,#169304,#169328,.T.); +#169328 = LINE('',#169329,#169330); +#169329 = CARTESIAN_POINT('',(1.4,0.35,0.)); +#169330 = VECTOR('',#169331,1.); +#169331 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169332 = ORIENTED_EDGE('',*,*,#169289,.T.); +#169333 = ORIENTED_EDGE('',*,*,#168220,.F.); +#169334 = ORIENTED_EDGE('',*,*,#169311,.F.); +#169335 = PLANE('',#169336); +#169336 = AXIS2_PLACEMENT_3D('',#169337,#169338,#169339); +#169337 = CARTESIAN_POINT('',(1.4,0.35,0.)); +#169338 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169339 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169340 = ADVANCED_FACE('',(#169341),#169366,.F.); +#169341 = FACE_BOUND('',#169342,.F.); +#169342 = EDGE_LOOP('',(#169343,#169353,#169359,#169360)); +#169343 = ORIENTED_EDGE('',*,*,#169344,.F.); +#169344 = EDGE_CURVE('',#169345,#169347,#169349,.T.); +#169345 = VERTEX_POINT('',#169346); +#169346 = CARTESIAN_POINT('',(0.6,1.15,0.)); +#169347 = VERTEX_POINT('',#169348); +#169348 = CARTESIAN_POINT('',(0.4,1.15,0.)); +#169349 = LINE('',#169350,#169351); +#169350 = CARTESIAN_POINT('',(0.6,1.15,0.)); +#169351 = VECTOR('',#169352,1.); +#169352 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169353 = ORIENTED_EDGE('',*,*,#169354,.T.); +#169354 = EDGE_CURVE('',#169345,#168239,#169355,.T.); +#169355 = LINE('',#169356,#169357); +#169356 = CARTESIAN_POINT('',(0.6,1.15,0.)); +#169357 = VECTOR('',#169358,1.); +#169358 = DIRECTION('',(0.,0.,1.)); +#169359 = ORIENTED_EDGE('',*,*,#168236,.F.); +#169360 = ORIENTED_EDGE('',*,*,#169361,.F.); +#169361 = EDGE_CURVE('',#169347,#168237,#169362,.T.); +#169362 = LINE('',#169363,#169364); +#169363 = CARTESIAN_POINT('',(0.4,1.15,0.)); +#169364 = VECTOR('',#169365,1.); +#169365 = DIRECTION('',(0.,0.,1.)); +#169366 = PLANE('',#169367); +#169367 = AXIS2_PLACEMENT_3D('',#169368,#169369,#169370); +#169368 = CARTESIAN_POINT('',(0.6,1.15,0.)); +#169369 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169370 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169371 = ADVANCED_FACE('',(#169372),#169390,.F.); +#169372 = FACE_BOUND('',#169373,.F.); +#169373 = EDGE_LOOP('',(#169374,#169382,#169383,#169384)); +#169374 = ORIENTED_EDGE('',*,*,#169375,.F.); +#169375 = EDGE_CURVE('',#169347,#169376,#169378,.T.); +#169376 = VERTEX_POINT('',#169377); +#169377 = CARTESIAN_POINT('',(0.4,0.75,0.)); +#169378 = LINE('',#169379,#169380); +#169379 = CARTESIAN_POINT('',(0.4,1.15,0.)); +#169380 = VECTOR('',#169381,1.); +#169381 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169382 = ORIENTED_EDGE('',*,*,#169361,.T.); +#169383 = ORIENTED_EDGE('',*,*,#168262,.F.); +#169384 = ORIENTED_EDGE('',*,*,#169385,.F.); +#169385 = EDGE_CURVE('',#169376,#168255,#169386,.T.); +#169386 = LINE('',#169387,#169388); +#169387 = CARTESIAN_POINT('',(0.4,0.75,0.)); +#169388 = VECTOR('',#169389,1.); +#169389 = DIRECTION('',(0.,0.,1.)); +#169390 = PLANE('',#169391); +#169391 = AXIS2_PLACEMENT_3D('',#169392,#169393,#169394); +#169392 = CARTESIAN_POINT('',(0.4,1.15,0.)); +#169393 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169394 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169395 = ADVANCED_FACE('',(#169396),#169414,.F.); +#169396 = FACE_BOUND('',#169397,.F.); +#169397 = EDGE_LOOP('',(#169398,#169406,#169412,#169413)); +#169398 = ORIENTED_EDGE('',*,*,#169399,.F.); +#169399 = EDGE_CURVE('',#169400,#169345,#169402,.T.); +#169400 = VERTEX_POINT('',#169401); +#169401 = CARTESIAN_POINT('',(0.6,0.75,0.)); +#169402 = LINE('',#169403,#169404); +#169403 = CARTESIAN_POINT('',(0.6,0.75,0.)); +#169404 = VECTOR('',#169405,1.); +#169405 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169406 = ORIENTED_EDGE('',*,*,#169407,.T.); +#169407 = EDGE_CURVE('',#169400,#168247,#169408,.T.); +#169408 = LINE('',#169409,#169410); +#169409 = CARTESIAN_POINT('',(0.6,0.75,0.)); +#169410 = VECTOR('',#169411,1.); +#169411 = DIRECTION('',(0.,0.,1.)); +#169412 = ORIENTED_EDGE('',*,*,#168246,.F.); +#169413 = ORIENTED_EDGE('',*,*,#169354,.F.); +#169414 = PLANE('',#169415); +#169415 = AXIS2_PLACEMENT_3D('',#169416,#169417,#169418); +#169416 = CARTESIAN_POINT('',(0.6,0.75,0.)); +#169417 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169418 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169419 = ADVANCED_FACE('',(#169420),#169431,.F.); +#169420 = FACE_BOUND('',#169421,.F.); +#169421 = EDGE_LOOP('',(#169422,#169428,#169429,#169430)); +#169422 = ORIENTED_EDGE('',*,*,#169423,.F.); +#169423 = EDGE_CURVE('',#169376,#169400,#169424,.T.); +#169424 = LINE('',#169425,#169426); +#169425 = CARTESIAN_POINT('',(0.4,0.75,0.)); +#169426 = VECTOR('',#169427,1.); +#169427 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169428 = ORIENTED_EDGE('',*,*,#169385,.T.); +#169429 = ORIENTED_EDGE('',*,*,#168254,.F.); +#169430 = ORIENTED_EDGE('',*,*,#169407,.F.); +#169431 = PLANE('',#169432); +#169432 = AXIS2_PLACEMENT_3D('',#169433,#169434,#169435); +#169433 = CARTESIAN_POINT('',(0.4,0.75,0.)); +#169434 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169435 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169436 = ADVANCED_FACE('',(#169437),#169462,.F.); +#169437 = FACE_BOUND('',#169438,.F.); +#169438 = EDGE_LOOP('',(#169439,#169449,#169455,#169456)); +#169439 = ORIENTED_EDGE('',*,*,#169440,.F.); +#169440 = EDGE_CURVE('',#169441,#169443,#169445,.T.); +#169441 = VERTEX_POINT('',#169442); +#169442 = CARTESIAN_POINT('',(0.1,1.15,0.)); +#169443 = VERTEX_POINT('',#169444); +#169444 = CARTESIAN_POINT('',(-0.1,1.15,0.)); +#169445 = LINE('',#169446,#169447); +#169446 = CARTESIAN_POINT('',(0.1,1.15,0.)); +#169447 = VECTOR('',#169448,1.); +#169448 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169449 = ORIENTED_EDGE('',*,*,#169450,.T.); +#169450 = EDGE_CURVE('',#169441,#168279,#169451,.T.); +#169451 = LINE('',#169452,#169453); +#169452 = CARTESIAN_POINT('',(0.1,1.15,0.)); +#169453 = VECTOR('',#169454,1.); +#169454 = DIRECTION('',(0.,0.,1.)); +#169455 = ORIENTED_EDGE('',*,*,#168276,.F.); +#169456 = ORIENTED_EDGE('',*,*,#169457,.F.); +#169457 = EDGE_CURVE('',#169443,#168277,#169458,.T.); +#169458 = LINE('',#169459,#169460); +#169459 = CARTESIAN_POINT('',(-0.1,1.15,0.)); +#169460 = VECTOR('',#169461,1.); +#169461 = DIRECTION('',(0.,0.,1.)); +#169462 = PLANE('',#169463); +#169463 = AXIS2_PLACEMENT_3D('',#169464,#169465,#169466); +#169464 = CARTESIAN_POINT('',(0.1,1.15,0.)); +#169465 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169466 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169467 = ADVANCED_FACE('',(#169468),#169486,.F.); +#169468 = FACE_BOUND('',#169469,.F.); +#169469 = EDGE_LOOP('',(#169470,#169478,#169479,#169480)); +#169470 = ORIENTED_EDGE('',*,*,#169471,.F.); +#169471 = EDGE_CURVE('',#169443,#169472,#169474,.T.); +#169472 = VERTEX_POINT('',#169473); +#169473 = CARTESIAN_POINT('',(-0.1,0.75,0.)); +#169474 = LINE('',#169475,#169476); +#169475 = CARTESIAN_POINT('',(-0.1,1.15,0.)); +#169476 = VECTOR('',#169477,1.); +#169477 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169478 = ORIENTED_EDGE('',*,*,#169457,.T.); +#169479 = ORIENTED_EDGE('',*,*,#168302,.F.); +#169480 = ORIENTED_EDGE('',*,*,#169481,.F.); +#169481 = EDGE_CURVE('',#169472,#168295,#169482,.T.); +#169482 = LINE('',#169483,#169484); +#169483 = CARTESIAN_POINT('',(-0.1,0.75,0.)); +#169484 = VECTOR('',#169485,1.); +#169485 = DIRECTION('',(0.,0.,1.)); +#169486 = PLANE('',#169487); +#169487 = AXIS2_PLACEMENT_3D('',#169488,#169489,#169490); +#169488 = CARTESIAN_POINT('',(-0.1,1.15,0.)); +#169489 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169490 = DIRECTION('',(-4.555315873023E-16,-1.,0.)); +#169491 = ADVANCED_FACE('',(#169492),#169510,.F.); +#169492 = FACE_BOUND('',#169493,.F.); +#169493 = EDGE_LOOP('',(#169494,#169502,#169508,#169509)); +#169494 = ORIENTED_EDGE('',*,*,#169495,.F.); +#169495 = EDGE_CURVE('',#169496,#169441,#169498,.T.); +#169496 = VERTEX_POINT('',#169497); +#169497 = CARTESIAN_POINT('',(0.1,0.75,0.)); +#169498 = LINE('',#169499,#169500); +#169499 = CARTESIAN_POINT('',(0.1,0.75,0.)); +#169500 = VECTOR('',#169501,1.); +#169501 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169502 = ORIENTED_EDGE('',*,*,#169503,.T.); +#169503 = EDGE_CURVE('',#169496,#168287,#169504,.T.); +#169504 = LINE('',#169505,#169506); +#169505 = CARTESIAN_POINT('',(0.1,0.75,0.)); +#169506 = VECTOR('',#169507,1.); +#169507 = DIRECTION('',(0.,0.,1.)); +#169508 = ORIENTED_EDGE('',*,*,#168286,.F.); +#169509 = ORIENTED_EDGE('',*,*,#169450,.F.); +#169510 = PLANE('',#169511); +#169511 = AXIS2_PLACEMENT_3D('',#169512,#169513,#169514); +#169512 = CARTESIAN_POINT('',(0.1,0.75,0.)); +#169513 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169514 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169515 = ADVANCED_FACE('',(#169516),#169527,.F.); +#169516 = FACE_BOUND('',#169517,.F.); +#169517 = EDGE_LOOP('',(#169518,#169524,#169525,#169526)); +#169518 = ORIENTED_EDGE('',*,*,#169519,.F.); +#169519 = EDGE_CURVE('',#169472,#169496,#169520,.T.); +#169520 = LINE('',#169521,#169522); +#169521 = CARTESIAN_POINT('',(-0.1,0.75,0.)); +#169522 = VECTOR('',#169523,1.); +#169523 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169524 = ORIENTED_EDGE('',*,*,#169481,.T.); +#169525 = ORIENTED_EDGE('',*,*,#168294,.F.); +#169526 = ORIENTED_EDGE('',*,*,#169503,.F.); +#169527 = PLANE('',#169528); +#169528 = AXIS2_PLACEMENT_3D('',#169529,#169530,#169531); +#169529 = CARTESIAN_POINT('',(-0.1,0.75,0.)); +#169530 = DIRECTION('',(4.555315873023E-16,1.,0.)); +#169531 = DIRECTION('',(1.,-4.555315873023E-16,0.)); +#169532 = ADVANCED_FACE('',(#169533),#169558,.F.); +#169533 = FACE_BOUND('',#169534,.F.); +#169534 = EDGE_LOOP('',(#169535,#169545,#169551,#169552)); +#169535 = ORIENTED_EDGE('',*,*,#169536,.F.); +#169536 = EDGE_CURVE('',#169537,#169539,#169541,.T.); +#169537 = VERTEX_POINT('',#169538); +#169538 = CARTESIAN_POINT('',(1.,0.85,0.)); +#169539 = VERTEX_POINT('',#169540); +#169540 = CARTESIAN_POINT('',(1.,0.65,0.)); +#169541 = LINE('',#169542,#169543); +#169542 = CARTESIAN_POINT('',(1.,0.85,0.)); +#169543 = VECTOR('',#169544,1.); +#169544 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169545 = ORIENTED_EDGE('',*,*,#169546,.T.); +#169546 = EDGE_CURVE('',#169537,#168313,#169547,.T.); +#169547 = LINE('',#169548,#169549); +#169548 = CARTESIAN_POINT('',(1.,0.85,0.)); +#169549 = VECTOR('',#169550,1.); +#169550 = DIRECTION('',(0.,0.,1.)); +#169551 = ORIENTED_EDGE('',*,*,#168310,.F.); +#169552 = ORIENTED_EDGE('',*,*,#169553,.F.); +#169553 = EDGE_CURVE('',#169539,#168311,#169554,.T.); +#169554 = LINE('',#169555,#169556); +#169555 = CARTESIAN_POINT('',(1.,0.65,0.)); +#169556 = VECTOR('',#169557,1.); +#169557 = DIRECTION('',(0.,0.,1.)); +#169558 = PLANE('',#169559); +#169559 = AXIS2_PLACEMENT_3D('',#169560,#169561,#169562); +#169560 = CARTESIAN_POINT('',(1.,0.85,0.)); +#169561 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169562 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169563 = ADVANCED_FACE('',(#169564),#169582,.F.); +#169564 = FACE_BOUND('',#169565,.F.); +#169565 = EDGE_LOOP('',(#169566,#169574,#169575,#169576)); +#169566 = ORIENTED_EDGE('',*,*,#169567,.F.); +#169567 = EDGE_CURVE('',#169539,#169568,#169570,.T.); +#169568 = VERTEX_POINT('',#169569); +#169569 = CARTESIAN_POINT('',(1.4,0.65,0.)); +#169570 = LINE('',#169571,#169572); +#169571 = CARTESIAN_POINT('',(1.,0.65,0.)); +#169572 = VECTOR('',#169573,1.); +#169573 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169574 = ORIENTED_EDGE('',*,*,#169553,.T.); +#169575 = ORIENTED_EDGE('',*,*,#168336,.F.); +#169576 = ORIENTED_EDGE('',*,*,#169577,.F.); +#169577 = EDGE_CURVE('',#169568,#168329,#169578,.T.); +#169578 = LINE('',#169579,#169580); +#169579 = CARTESIAN_POINT('',(1.4,0.65,0.)); +#169580 = VECTOR('',#169581,1.); +#169581 = DIRECTION('',(0.,0.,1.)); +#169582 = PLANE('',#169583); +#169583 = AXIS2_PLACEMENT_3D('',#169584,#169585,#169586); +#169584 = CARTESIAN_POINT('',(1.,0.65,0.)); +#169585 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169586 = DIRECTION('',(1.,-3.445092848398E-16,0.)); +#169587 = ADVANCED_FACE('',(#169588),#169606,.F.); +#169588 = FACE_BOUND('',#169589,.F.); +#169589 = EDGE_LOOP('',(#169590,#169598,#169604,#169605)); +#169590 = ORIENTED_EDGE('',*,*,#169591,.F.); +#169591 = EDGE_CURVE('',#169592,#169537,#169594,.T.); +#169592 = VERTEX_POINT('',#169593); +#169593 = CARTESIAN_POINT('',(1.4,0.85,0.)); +#169594 = LINE('',#169595,#169596); +#169595 = CARTESIAN_POINT('',(1.4,0.85,0.)); +#169596 = VECTOR('',#169597,1.); +#169597 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169598 = ORIENTED_EDGE('',*,*,#169599,.T.); +#169599 = EDGE_CURVE('',#169592,#168321,#169600,.T.); +#169600 = LINE('',#169601,#169602); +#169601 = CARTESIAN_POINT('',(1.4,0.85,0.)); +#169602 = VECTOR('',#169603,1.); +#169603 = DIRECTION('',(0.,0.,1.)); +#169604 = ORIENTED_EDGE('',*,*,#168320,.F.); +#169605 = ORIENTED_EDGE('',*,*,#169546,.F.); +#169606 = PLANE('',#169607); +#169607 = AXIS2_PLACEMENT_3D('',#169608,#169609,#169610); +#169608 = CARTESIAN_POINT('',(1.4,0.85,0.)); +#169609 = DIRECTION('',(-3.445092848398E-16,-1.,0.)); +#169610 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169611 = ADVANCED_FACE('',(#169612),#169623,.F.); +#169612 = FACE_BOUND('',#169613,.F.); +#169613 = EDGE_LOOP('',(#169614,#169620,#169621,#169622)); +#169614 = ORIENTED_EDGE('',*,*,#169615,.F.); +#169615 = EDGE_CURVE('',#169568,#169592,#169616,.T.); +#169616 = LINE('',#169617,#169618); +#169617 = CARTESIAN_POINT('',(1.4,0.65,0.)); +#169618 = VECTOR('',#169619,1.); +#169619 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169620 = ORIENTED_EDGE('',*,*,#169577,.T.); +#169621 = ORIENTED_EDGE('',*,*,#168328,.F.); +#169622 = ORIENTED_EDGE('',*,*,#169599,.F.); +#169623 = PLANE('',#169624); +#169624 = AXIS2_PLACEMENT_3D('',#169625,#169626,#169627); +#169625 = CARTESIAN_POINT('',(1.4,0.65,0.)); +#169626 = DIRECTION('',(-1.,3.445092848398E-16,0.)); +#169627 = DIRECTION('',(3.445092848398E-16,1.,0.)); +#169628 = ADVANCED_FACE('',(#169629),#169654,.F.); +#169629 = FACE_BOUND('',#169630,.F.); +#169630 = EDGE_LOOP('',(#169631,#169641,#169647,#169648)); +#169631 = ORIENTED_EDGE('',*,*,#169632,.F.); +#169632 = EDGE_CURVE('',#169633,#169635,#169637,.T.); +#169633 = VERTEX_POINT('',#169634); +#169634 = CARTESIAN_POINT('',(-1.4,0.85,0.)); +#169635 = VERTEX_POINT('',#169636); +#169636 = CARTESIAN_POINT('',(-1.4,0.65,0.)); +#169637 = LINE('',#169638,#169639); +#169638 = CARTESIAN_POINT('',(-1.4,0.85,0.)); +#169639 = VECTOR('',#169640,1.); +#169640 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169641 = ORIENTED_EDGE('',*,*,#169642,.T.); +#169642 = EDGE_CURVE('',#169633,#168347,#169643,.T.); +#169643 = LINE('',#169644,#169645); +#169644 = CARTESIAN_POINT('',(-1.4,0.85,0.)); +#169645 = VECTOR('',#169646,1.); +#169646 = DIRECTION('',(0.,0.,1.)); +#169647 = ORIENTED_EDGE('',*,*,#168344,.F.); +#169648 = ORIENTED_EDGE('',*,*,#169649,.F.); +#169649 = EDGE_CURVE('',#169635,#168345,#169650,.T.); +#169650 = LINE('',#169651,#169652); +#169651 = CARTESIAN_POINT('',(-1.4,0.65,0.)); +#169652 = VECTOR('',#169653,1.); +#169653 = DIRECTION('',(0.,0.,1.)); +#169654 = PLANE('',#169655); +#169655 = AXIS2_PLACEMENT_3D('',#169656,#169657,#169658); +#169656 = CARTESIAN_POINT('',(-1.4,0.85,0.)); +#169657 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169658 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169659 = ADVANCED_FACE('',(#169660),#169678,.F.); +#169660 = FACE_BOUND('',#169661,.F.); +#169661 = EDGE_LOOP('',(#169662,#169670,#169671,#169672)); +#169662 = ORIENTED_EDGE('',*,*,#169663,.F.); +#169663 = EDGE_CURVE('',#169635,#169664,#169666,.T.); +#169664 = VERTEX_POINT('',#169665); +#169665 = CARTESIAN_POINT('',(-1.,0.65,0.)); +#169666 = LINE('',#169667,#169668); +#169667 = CARTESIAN_POINT('',(-1.4,0.65,0.)); +#169668 = VECTOR('',#169669,1.); +#169669 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169670 = ORIENTED_EDGE('',*,*,#169649,.T.); +#169671 = ORIENTED_EDGE('',*,*,#168370,.F.); +#169672 = ORIENTED_EDGE('',*,*,#169673,.F.); +#169673 = EDGE_CURVE('',#169664,#168363,#169674,.T.); +#169674 = LINE('',#169675,#169676); +#169675 = CARTESIAN_POINT('',(-1.,0.65,0.)); +#169676 = VECTOR('',#169677,1.); +#169677 = DIRECTION('',(0.,0.,1.)); +#169678 = PLANE('',#169679); +#169679 = AXIS2_PLACEMENT_3D('',#169680,#169681,#169682); +#169680 = CARTESIAN_POINT('',(-1.4,0.65,0.)); +#169681 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169682 = DIRECTION('',(1.,-4.669739647545E-16,0.)); +#169683 = ADVANCED_FACE('',(#169684),#169702,.F.); +#169684 = FACE_BOUND('',#169685,.F.); +#169685 = EDGE_LOOP('',(#169686,#169694,#169700,#169701)); +#169686 = ORIENTED_EDGE('',*,*,#169687,.F.); +#169687 = EDGE_CURVE('',#169688,#169633,#169690,.T.); +#169688 = VERTEX_POINT('',#169689); +#169689 = CARTESIAN_POINT('',(-1.,0.85,0.)); +#169690 = LINE('',#169691,#169692); +#169691 = CARTESIAN_POINT('',(-1.,0.85,0.)); +#169692 = VECTOR('',#169693,1.); +#169693 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169694 = ORIENTED_EDGE('',*,*,#169695,.T.); +#169695 = EDGE_CURVE('',#169688,#168355,#169696,.T.); +#169696 = LINE('',#169697,#169698); +#169697 = CARTESIAN_POINT('',(-1.,0.85,0.)); +#169698 = VECTOR('',#169699,1.); +#169699 = DIRECTION('',(0.,0.,1.)); +#169700 = ORIENTED_EDGE('',*,*,#168354,.F.); +#169701 = ORIENTED_EDGE('',*,*,#169642,.F.); +#169702 = PLANE('',#169703); +#169703 = AXIS2_PLACEMENT_3D('',#169704,#169705,#169706); +#169704 = CARTESIAN_POINT('',(-1.,0.85,0.)); +#169705 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169706 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169707 = ADVANCED_FACE('',(#169708),#169719,.F.); +#169708 = FACE_BOUND('',#169709,.F.); +#169709 = EDGE_LOOP('',(#169710,#169716,#169717,#169718)); +#169710 = ORIENTED_EDGE('',*,*,#169711,.F.); +#169711 = EDGE_CURVE('',#169664,#169688,#169712,.T.); +#169712 = LINE('',#169713,#169714); +#169713 = CARTESIAN_POINT('',(-1.,0.65,0.)); +#169714 = VECTOR('',#169715,1.); +#169715 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169716 = ORIENTED_EDGE('',*,*,#169673,.T.); +#169717 = ORIENTED_EDGE('',*,*,#168362,.F.); +#169718 = ORIENTED_EDGE('',*,*,#169695,.F.); +#169719 = PLANE('',#169720); +#169720 = AXIS2_PLACEMENT_3D('',#169721,#169722,#169723); +#169721 = CARTESIAN_POINT('',(-1.,0.65,0.)); +#169722 = DIRECTION('',(-1.,4.669739647545E-16,0.)); +#169723 = DIRECTION('',(4.669739647545E-16,1.,0.)); +#169724 = ADVANCED_FACE('',(#169725,#169731),#169742,.T.); +#169725 = FACE_BOUND('',#169726,.T.); +#169726 = EDGE_LOOP('',(#169727,#169728,#169729,#169730)); +#169727 = ORIENTED_EDGE('',*,*,#168401,.F.); +#169728 = ORIENTED_EDGE('',*,*,#168441,.T.); +#169729 = ORIENTED_EDGE('',*,*,#168466,.T.); +#169730 = ORIENTED_EDGE('',*,*,#168417,.F.); +#169731 = FACE_BOUND('',#169732,.T.); +#169732 = EDGE_LOOP('',(#169733)); +#169733 = ORIENTED_EDGE('',*,*,#169734,.T.); +#169734 = EDGE_CURVE('',#169735,#169735,#169737,.T.); +#169735 = VERTEX_POINT('',#169736); +#169736 = CARTESIAN_POINT('',(-1.,0.65,0.78)); +#169737 = CIRCLE('',#169738,0.1); +#169738 = AXIS2_PLACEMENT_3D('',#169739,#169740,#169741); +#169739 = CARTESIAN_POINT('',(-1.,0.75,0.78)); +#169740 = DIRECTION('',(-0.,0.,-1.)); +#169741 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#169742 = PLANE('',#169743); +#169743 = AXIS2_PLACEMENT_3D('',#169744,#169745,#169746); +#169744 = CARTESIAN_POINT('',(-1.5,1.25,0.78)); +#169745 = DIRECTION('',(0.,0.,1.)); +#169746 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#169747 = ADVANCED_FACE('',(#169748),#169754,.F.); +#169748 = FACE_BOUND('',#169749,.F.); +#169749 = EDGE_LOOP('',(#169750,#169751,#169752,#169753)); +#169750 = ORIENTED_EDGE('',*,*,#168559,.T.); +#169751 = ORIENTED_EDGE('',*,*,#168535,.T.); +#169752 = ORIENTED_EDGE('',*,*,#168480,.T.); +#169753 = ORIENTED_EDGE('',*,*,#168511,.T.); +#169754 = PLANE('',#169755); +#169755 = AXIS2_PLACEMENT_3D('',#169756,#169757,#169758); +#169756 = CARTESIAN_POINT('',(-1.2,-0.75,0.)); +#169757 = DIRECTION('',(0.,0.,1.)); +#169758 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169759 = ADVANCED_FACE('',(#169760),#169766,.F.); +#169760 = FACE_BOUND('',#169761,.F.); +#169761 = EDGE_LOOP('',(#169762,#169763,#169764,#169765)); +#169762 = ORIENTED_EDGE('',*,*,#168631,.T.); +#169763 = ORIENTED_EDGE('',*,*,#168576,.T.); +#169764 = ORIENTED_EDGE('',*,*,#168607,.T.); +#169765 = ORIENTED_EDGE('',*,*,#168655,.T.); +#169766 = PLANE('',#169767); +#169767 = AXIS2_PLACEMENT_3D('',#169768,#169769,#169770); +#169768 = CARTESIAN_POINT('',(-3.74700270811E-16,-0.95,0.)); +#169769 = DIRECTION('',(0.,0.,1.)); +#169770 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#169771 = ADVANCED_FACE('',(#169772),#169778,.F.); +#169772 = FACE_BOUND('',#169773,.F.); +#169773 = EDGE_LOOP('',(#169774,#169775,#169776,#169777)); +#169774 = ORIENTED_EDGE('',*,*,#168727,.T.); +#169775 = ORIENTED_EDGE('',*,*,#168672,.T.); +#169776 = ORIENTED_EDGE('',*,*,#168703,.T.); +#169777 = ORIENTED_EDGE('',*,*,#168751,.T.); +#169778 = PLANE('',#169779); +#169779 = AXIS2_PLACEMENT_3D('',#169780,#169781,#169782); +#169780 = CARTESIAN_POINT('',(-0.5,-0.95,0.)); +#169781 = DIRECTION('',(0.,0.,1.)); +#169782 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#169783 = ADVANCED_FACE('',(#169784),#169790,.F.); +#169784 = FACE_BOUND('',#169785,.F.); +#169785 = EDGE_LOOP('',(#169786,#169787,#169788,#169789)); +#169786 = ORIENTED_EDGE('',*,*,#168823,.T.); +#169787 = ORIENTED_EDGE('',*,*,#168768,.T.); +#169788 = ORIENTED_EDGE('',*,*,#168799,.T.); +#169789 = ORIENTED_EDGE('',*,*,#168847,.T.); +#169790 = PLANE('',#169791); +#169791 = AXIS2_PLACEMENT_3D('',#169792,#169793,#169794); +#169792 = CARTESIAN_POINT('',(1.2,-0.75,0.)); +#169793 = DIRECTION('',(0.,0.,1.)); +#169794 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#169795 = ADVANCED_FACE('',(#169796),#169802,.F.); +#169796 = FACE_BOUND('',#169797,.F.); +#169797 = EDGE_LOOP('',(#169798,#169799,#169800,#169801)); +#169798 = ORIENTED_EDGE('',*,*,#168919,.T.); +#169799 = ORIENTED_EDGE('',*,*,#168864,.T.); +#169800 = ORIENTED_EDGE('',*,*,#168895,.T.); +#169801 = ORIENTED_EDGE('',*,*,#168943,.T.); +#169802 = PLANE('',#169803); +#169803 = AXIS2_PLACEMENT_3D('',#169804,#169805,#169806); +#169804 = CARTESIAN_POINT('',(0.5,-0.95,0.)); +#169805 = DIRECTION('',(0.,0.,1.)); +#169806 = DIRECTION('',(1.,-5.665538897648E-16,0.)); +#169807 = ADVANCED_FACE('',(#169808),#169814,.F.); +#169808 = FACE_BOUND('',#169809,.F.); +#169809 = EDGE_LOOP('',(#169810,#169811,#169812,#169813)); +#169810 = ORIENTED_EDGE('',*,*,#169015,.T.); +#169811 = ORIENTED_EDGE('',*,*,#168960,.T.); +#169812 = ORIENTED_EDGE('',*,*,#168991,.T.); +#169813 = ORIENTED_EDGE('',*,*,#169039,.T.); +#169814 = PLANE('',#169815); +#169815 = AXIS2_PLACEMENT_3D('',#169816,#169817,#169818); +#169816 = CARTESIAN_POINT('',(-1.2,0.25,0.)); +#169817 = DIRECTION('',(0.,0.,1.)); +#169818 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169819 = ADVANCED_FACE('',(#169820),#169826,.F.); +#169820 = FACE_BOUND('',#169821,.F.); +#169821 = EDGE_LOOP('',(#169822,#169823,#169824,#169825)); +#169822 = ORIENTED_EDGE('',*,*,#169111,.T.); +#169823 = ORIENTED_EDGE('',*,*,#169056,.T.); +#169824 = ORIENTED_EDGE('',*,*,#169087,.T.); +#169825 = ORIENTED_EDGE('',*,*,#169135,.T.); +#169826 = PLANE('',#169827); +#169827 = AXIS2_PLACEMENT_3D('',#169828,#169829,#169830); +#169828 = CARTESIAN_POINT('',(-1.2,-0.25,0.)); +#169829 = DIRECTION('',(0.,0.,1.)); +#169830 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169831 = ADVANCED_FACE('',(#169832),#169838,.F.); +#169832 = FACE_BOUND('',#169833,.F.); +#169833 = EDGE_LOOP('',(#169834,#169835,#169836,#169837)); +#169834 = ORIENTED_EDGE('',*,*,#169152,.T.); +#169835 = ORIENTED_EDGE('',*,*,#169183,.T.); +#169836 = ORIENTED_EDGE('',*,*,#169231,.T.); +#169837 = ORIENTED_EDGE('',*,*,#169207,.T.); +#169838 = PLANE('',#169839); +#169839 = AXIS2_PLACEMENT_3D('',#169840,#169841,#169842); +#169840 = CARTESIAN_POINT('',(1.2,-0.25,0.)); +#169841 = DIRECTION('',(0.,0.,1.)); +#169842 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#169843 = ADVANCED_FACE('',(#169844),#169850,.F.); +#169844 = FACE_BOUND('',#169845,.F.); +#169845 = EDGE_LOOP('',(#169846,#169847,#169848,#169849)); +#169846 = ORIENTED_EDGE('',*,*,#169327,.T.); +#169847 = ORIENTED_EDGE('',*,*,#169303,.T.); +#169848 = ORIENTED_EDGE('',*,*,#169248,.T.); +#169849 = ORIENTED_EDGE('',*,*,#169279,.T.); +#169850 = PLANE('',#169851); +#169851 = AXIS2_PLACEMENT_3D('',#169852,#169853,#169854); +#169852 = CARTESIAN_POINT('',(1.2,0.25,0.)); +#169853 = DIRECTION('',(0.,0.,1.)); +#169854 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#169855 = ADVANCED_FACE('',(#169856),#169862,.F.); +#169856 = FACE_BOUND('',#169857,.F.); +#169857 = EDGE_LOOP('',(#169858,#169859,#169860,#169861)); +#169858 = ORIENTED_EDGE('',*,*,#169375,.T.); +#169859 = ORIENTED_EDGE('',*,*,#169423,.T.); +#169860 = ORIENTED_EDGE('',*,*,#169399,.T.); +#169861 = ORIENTED_EDGE('',*,*,#169344,.T.); +#169862 = PLANE('',#169863); +#169863 = AXIS2_PLACEMENT_3D('',#169864,#169865,#169866); +#169864 = CARTESIAN_POINT('',(0.5,0.95,0.)); +#169865 = DIRECTION('',(0.,0.,1.)); +#169866 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169867 = ADVANCED_FACE('',(#169868),#169874,.F.); +#169868 = FACE_BOUND('',#169869,.F.); +#169869 = EDGE_LOOP('',(#169870,#169871,#169872,#169873)); +#169870 = ORIENTED_EDGE('',*,*,#169471,.T.); +#169871 = ORIENTED_EDGE('',*,*,#169519,.T.); +#169872 = ORIENTED_EDGE('',*,*,#169495,.T.); +#169873 = ORIENTED_EDGE('',*,*,#169440,.T.); +#169874 = PLANE('',#169875); +#169875 = AXIS2_PLACEMENT_3D('',#169876,#169877,#169878); +#169876 = CARTESIAN_POINT('',(2.775557561563E-16,0.95,0.)); +#169877 = DIRECTION('',(0.,0.,1.)); +#169878 = DIRECTION('',(-1.,4.555315873023E-16,0.)); +#169879 = ADVANCED_FACE('',(#169880),#169886,.F.); +#169880 = FACE_BOUND('',#169881,.F.); +#169881 = EDGE_LOOP('',(#169882,#169883,#169884,#169885)); +#169882 = ORIENTED_EDGE('',*,*,#169591,.T.); +#169883 = ORIENTED_EDGE('',*,*,#169536,.T.); +#169884 = ORIENTED_EDGE('',*,*,#169567,.T.); +#169885 = ORIENTED_EDGE('',*,*,#169615,.T.); +#169886 = PLANE('',#169887); +#169887 = AXIS2_PLACEMENT_3D('',#169888,#169889,#169890); +#169888 = CARTESIAN_POINT('',(1.2,0.75,0.)); +#169889 = DIRECTION('',(0.,0.,1.)); +#169890 = DIRECTION('',(3.445092848398E-16,1.,-0.)); +#169891 = ADVANCED_FACE('',(#169892),#169898,.F.); +#169892 = FACE_BOUND('',#169893,.F.); +#169893 = EDGE_LOOP('',(#169894,#169895,#169896,#169897)); +#169894 = ORIENTED_EDGE('',*,*,#169663,.T.); +#169895 = ORIENTED_EDGE('',*,*,#169711,.T.); +#169896 = ORIENTED_EDGE('',*,*,#169687,.T.); +#169897 = ORIENTED_EDGE('',*,*,#169632,.T.); +#169898 = PLANE('',#169899); +#169899 = AXIS2_PLACEMENT_3D('',#169900,#169901,#169902); +#169900 = CARTESIAN_POINT('',(-1.2,0.75,0.)); +#169901 = DIRECTION('',(0.,0.,1.)); +#169902 = DIRECTION('',(-4.669739647545E-16,-1.,0.)); +#169903 = ADVANCED_FACE('',(#169904),#169923,.F.); +#169904 = FACE_BOUND('',#169905,.F.); +#169905 = EDGE_LOOP('',(#169906,#169914,#169921,#169922)); +#169906 = ORIENTED_EDGE('',*,*,#169907,.T.); +#169907 = EDGE_CURVE('',#169735,#169908,#169910,.T.); +#169908 = VERTEX_POINT('',#169909); +#169909 = CARTESIAN_POINT('',(-1.,0.65,0.76)); +#169910 = LINE('',#169911,#169912); +#169911 = CARTESIAN_POINT('',(-1.,0.65,0.8)); +#169912 = VECTOR('',#169913,1.); +#169913 = DIRECTION('',(-0.,0.,-1.)); +#169914 = ORIENTED_EDGE('',*,*,#169915,.T.); +#169915 = EDGE_CURVE('',#169908,#169908,#169916,.T.); +#169916 = CIRCLE('',#169917,0.1); +#169917 = AXIS2_PLACEMENT_3D('',#169918,#169919,#169920); +#169918 = CARTESIAN_POINT('',(-1.,0.75,0.76)); +#169919 = DIRECTION('',(0.,0.,1.)); +#169920 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#169921 = ORIENTED_EDGE('',*,*,#169907,.F.); +#169922 = ORIENTED_EDGE('',*,*,#169734,.T.); +#169923 = CYLINDRICAL_SURFACE('',#169924,0.1); +#169924 = AXIS2_PLACEMENT_3D('',#169925,#169926,#169927); +#169925 = CARTESIAN_POINT('',(-1.,0.75,0.8)); +#169926 = DIRECTION('',(0.,0.,-1.)); +#169927 = DIRECTION('',(-2.22044604925E-16,-1.,-0.)); +#169928 = ADVANCED_FACE('',(#169929),#169932,.T.); +#169929 = FACE_BOUND('',#169930,.T.); +#169930 = EDGE_LOOP('',(#169931)); +#169931 = ORIENTED_EDGE('',*,*,#169915,.T.); +#169932 = PLANE('',#169933); +#169933 = AXIS2_PLACEMENT_3D('',#169934,#169935,#169936); +#169934 = CARTESIAN_POINT('',(-1.,0.75,0.76)); +#169935 = DIRECTION('',(0.,0.,1.)); +#169936 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#169937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#169941)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#169938,#169939,#169940)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#169938 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#169939 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#169940 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#169941 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#169938, + 'distance_accuracy_value','confusion accuracy'); +#169942 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169943,#169945); +#169943 = ( REPRESENTATION_RELATIONSHIP('','',#167753,#167730) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169944) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169944 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167731); +#169945 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169946); +#169946 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('81','=>[0:1:1:44]','',#167725, + #167748,$); +#169947 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#167750)); +#169948 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169949,#169951); +#169949 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169950) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169950 = ITEM_DEFINED_TRANSFORMATION('','',#11,#251); +#169951 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169952); +#169952 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('83','C_BUCK_IN1','',#5,#155569 + ,$); +#169953 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169954,#169956); +#169954 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169955) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169955 = ITEM_DEFINED_TRANSFORMATION('','',#11,#255); +#169956 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169957); +#169957 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('84','C_LATCH_G1','',#5,#32437, + $); +#169958 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169959,#169961); +#169959 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169960) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169960 = ITEM_DEFINED_TRANSFORMATION('','',#11,#259); +#169961 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169962); +#169962 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('85','C_HALL1','',#5,#32437,$); +#169963 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169964,#169966); +#169964 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169965) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169965 = ITEM_DEFINED_TRANSFORMATION('','',#11,#263); +#169966 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169967); +#169967 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('86','R_INV_BASE1','',#5,#31605 + ,$); +#169968 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169969,#169971); +#169969 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169970) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169970 = ITEM_DEFINED_TRANSFORMATION('','',#11,#267); +#169971 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169972); +#169972 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('87','R_INV_PU1','',#5,#31605,$ + ); +#169973 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169974,#169976); +#169974 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169975) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169975 = ITEM_DEFINED_TRANSFORMATION('','',#11,#271); +#169976 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169977); +#169977 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('88','R_GATE1','',#5,#31605,$); +#169978 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169979,#169981); +#169979 = ( REPRESENTATION_RELATIONSHIP('','',#156515,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169980) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169980 = ITEM_DEFINED_TRANSFORMATION('','',#11,#275); +#169981 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169982); +#169982 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('89','Q_LATCH1','',#5,#156510,$ + ); +#169983 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169984,#169986); +#169984 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169985) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169985 = ITEM_DEFINED_TRANSFORMATION('','',#11,#279); +#169986 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169987); +#169987 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('90','C_SYS_2','',#5,#32437,$); +#169988 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169989,#169991); +#169989 = ( REPRESENTATION_RELATIONSHIP('','',#73044,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169990) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169990 = ITEM_DEFINED_TRANSFORMATION('','',#11,#283); +#169991 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169992); +#169992 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('91','C_IMU_2','',#5,#73039,$); +#169993 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#169994,#169996); +#169994 = ( REPRESENTATION_RELATIONSHIP('','',#155574,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#169995) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#169995 = ITEM_DEFINED_TRANSFORMATION('','',#11,#287); +#169996 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #169997); +#169997 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('92','C_BAT1','',#5,#155569,$); +#169998 = SHAPE_DEFINITION_REPRESENTATION(#169999,#170005); +#169999 = PRODUCT_DEFINITION_SHAPE('','',#170000); +#170000 = PRODUCT_DEFINITION('design','',#170001,#170004); +#170001 = PRODUCT_DEFINITION_FORMATION('','',#170002); +#170002 = PRODUCT('BQ25185DLHR','BQ25185DLHR','',(#170003)); +#170003 = PRODUCT_CONTEXT('',#2,'mechanical'); +#170004 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#170005 = SHAPE_REPRESENTATION('',(#11,#170006),#170010); +#170006 = AXIS2_PLACEMENT_3D('',#170007,#170008,#170009); +#170007 = CARTESIAN_POINT('',(0.,0.,0.)); +#170008 = DIRECTION('',(0.,0.,1.)); +#170009 = DIRECTION('',(1.,0.,-0.)); +#170010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#170014)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#170011,#170012,#170013)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#170011 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#170012 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#170013 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#170014 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#170011, + 'distance_accuracy_value','confusion accuracy'); +#170015 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#170016,#170018); +#170016 = ( REPRESENTATION_RELATIONSHIP('','',#170005,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#170017) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#170017 = ITEM_DEFINED_TRANSFORMATION('','',#11,#291); +#170018 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #170019); +#170019 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('94','U_CHG1','',#5,#170000,$); +#170020 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#170002)); +#170021 = SHAPE_DEFINITION_REPRESENTATION(#170022,#170028); +#170022 = PRODUCT_DEFINITION_SHAPE('','',#170023); +#170023 = PRODUCT_DEFINITION('design','',#170024,#170027); +#170024 = PRODUCT_DEFINITION_FORMATION('','',#170025); +#170025 = PRODUCT('BQ25185DLHR','BQ25185DLHR','',(#170026)); +#170026 = PRODUCT_CONTEXT('',#2,'mechanical'); +#170027 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#170028 = SHAPE_REPRESENTATION('',(#11,#170029,#170117,#170267,#170450, + #170600,#170750,#170900,#171050,#171200,#171350,#171500,#171650, + #171800,#174933,#175083,#175233,#175383),#175533); +#170029 = MANIFOLD_SOLID_BREP('',#170030); +#170030 = CLOSED_SHELL('',(#170031,#170073,#170097,#170107)); +#170031 = ADVANCED_FACE('',(#170032),#170068,.T.); +#170032 = FACE_BOUND('',#170033,.T.); +#170033 = EDGE_LOOP('',(#170034,#170045,#170053,#170062)); +#170034 = ORIENTED_EDGE('',*,*,#170035,.T.); +#170035 = EDGE_CURVE('',#170036,#170038,#170040,.T.); +#170036 = VERTEX_POINT('',#170037); +#170037 = CARTESIAN_POINT('',(-0.85,0.75,-0.65)); +#170038 = VERTEX_POINT('',#170039); +#170039 = CARTESIAN_POINT('',(-0.85,0.75,-0.85)); +#170040 = CIRCLE('',#170041,0.1); +#170041 = AXIS2_PLACEMENT_3D('',#170042,#170043,#170044); +#170042 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#170043 = DIRECTION('',(0.,1.,0.)); +#170044 = DIRECTION('',(0.,-0.,1.)); +#170045 = ORIENTED_EDGE('',*,*,#170046,.T.); +#170046 = EDGE_CURVE('',#170038,#170047,#170049,.T.); +#170047 = VERTEX_POINT('',#170048); +#170048 = CARTESIAN_POINT('',(-0.85,0.8,-0.85)); +#170049 = LINE('',#170050,#170051); +#170050 = CARTESIAN_POINT('',(-0.85,0.75,-0.85)); +#170051 = VECTOR('',#170052,1.); +#170052 = DIRECTION('',(0.,1.,0.)); +#170053 = ORIENTED_EDGE('',*,*,#170054,.F.); +#170054 = EDGE_CURVE('',#170055,#170047,#170057,.T.); +#170055 = VERTEX_POINT('',#170056); +#170056 = CARTESIAN_POINT('',(-0.85,0.8,-0.65)); +#170057 = CIRCLE('',#170058,0.1); +#170058 = AXIS2_PLACEMENT_3D('',#170059,#170060,#170061); +#170059 = CARTESIAN_POINT('',(-0.85,0.8,-0.75)); +#170060 = DIRECTION('',(0.,1.,0.)); +#170061 = DIRECTION('',(0.,-0.,1.)); +#170062 = ORIENTED_EDGE('',*,*,#170063,.F.); +#170063 = EDGE_CURVE('',#170036,#170055,#170064,.T.); +#170064 = LINE('',#170065,#170066); +#170065 = CARTESIAN_POINT('',(-0.85,0.75,-0.65)); +#170066 = VECTOR('',#170067,1.); +#170067 = DIRECTION('',(0.,1.,0.)); +#170068 = CYLINDRICAL_SURFACE('',#170069,0.1); +#170069 = AXIS2_PLACEMENT_3D('',#170070,#170071,#170072); +#170070 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#170071 = DIRECTION('',(0.,1.,0.)); +#170072 = DIRECTION('',(0.,-0.,1.)); +#170073 = ADVANCED_FACE('',(#170074),#170092,.T.); +#170074 = FACE_BOUND('',#170075,.T.); +#170075 = EDGE_LOOP('',(#170076,#170077,#170084,#170085)); +#170076 = ORIENTED_EDGE('',*,*,#170046,.F.); +#170077 = ORIENTED_EDGE('',*,*,#170078,.T.); +#170078 = EDGE_CURVE('',#170038,#170036,#170079,.T.); +#170079 = CIRCLE('',#170080,0.1); +#170080 = AXIS2_PLACEMENT_3D('',#170081,#170082,#170083); +#170081 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#170082 = DIRECTION('',(0.,1.,0.)); +#170083 = DIRECTION('',(0.,-0.,1.)); +#170084 = ORIENTED_EDGE('',*,*,#170063,.T.); +#170085 = ORIENTED_EDGE('',*,*,#170086,.F.); +#170086 = EDGE_CURVE('',#170047,#170055,#170087,.T.); +#170087 = CIRCLE('',#170088,0.1); +#170088 = AXIS2_PLACEMENT_3D('',#170089,#170090,#170091); +#170089 = CARTESIAN_POINT('',(-0.85,0.8,-0.75)); +#170090 = DIRECTION('',(0.,1.,0.)); +#170091 = DIRECTION('',(0.,-0.,1.)); +#170092 = CYLINDRICAL_SURFACE('',#170093,0.1); +#170093 = AXIS2_PLACEMENT_3D('',#170094,#170095,#170096); +#170094 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#170095 = DIRECTION('',(0.,1.,0.)); +#170096 = DIRECTION('',(0.,-0.,1.)); +#170097 = ADVANCED_FACE('',(#170098),#170102,.F.); +#170098 = FACE_BOUND('',#170099,.T.); +#170099 = EDGE_LOOP('',(#170100,#170101)); +#170100 = ORIENTED_EDGE('',*,*,#170035,.F.); +#170101 = ORIENTED_EDGE('',*,*,#170078,.F.); +#170102 = PLANE('',#170103); +#170103 = AXIS2_PLACEMENT_3D('',#170104,#170105,#170106); +#170104 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#170105 = DIRECTION('',(0.,1.,0.)); +#170106 = DIRECTION('',(0.,-0.,1.)); +#170107 = ADVANCED_FACE('',(#170108),#170112,.T.); +#170108 = FACE_BOUND('',#170109,.T.); +#170109 = EDGE_LOOP('',(#170110,#170111)); +#170110 = ORIENTED_EDGE('',*,*,#170054,.T.); +#170111 = ORIENTED_EDGE('',*,*,#170086,.T.); +#170112 = PLANE('',#170113); +#170113 = AXIS2_PLACEMENT_3D('',#170114,#170115,#170116); +#170114 = CARTESIAN_POINT('',(-0.85,0.8,-0.75)); +#170115 = DIRECTION('',(0.,1.,0.)); +#170116 = DIRECTION('',(0.,-0.,1.)); +#170117 = MANIFOLD_SOLID_BREP('',#170118); +#170118 = CLOSED_SHELL('',(#170119,#170159,#170190,#170221,#170243, + #170255)); +#170119 = ADVANCED_FACE('',(#170120),#170154,.F.); +#170120 = FACE_BOUND('',#170121,.T.); +#170121 = EDGE_LOOP('',(#170122,#170132,#170140,#170148)); +#170122 = ORIENTED_EDGE('',*,*,#170123,.T.); +#170123 = EDGE_CURVE('',#170124,#170126,#170128,.T.); +#170124 = VERTEX_POINT('',#170125); +#170125 = CARTESIAN_POINT('',(-1.1,0.,0.7)); +#170126 = VERTEX_POINT('',#170127); +#170127 = CARTESIAN_POINT('',(-1.1,0.,0.9)); +#170128 = LINE('',#170129,#170130); +#170129 = CARTESIAN_POINT('',(-1.1,0.,0.7)); +#170130 = VECTOR('',#170131,1.); +#170131 = DIRECTION('',(0.,0.,1.)); +#170132 = ORIENTED_EDGE('',*,*,#170133,.F.); +#170133 = EDGE_CURVE('',#170134,#170126,#170136,.T.); +#170134 = VERTEX_POINT('',#170135); +#170135 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#170136 = LINE('',#170137,#170138); +#170137 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#170138 = VECTOR('',#170139,1.); +#170139 = DIRECTION('',(-0.,-1.,-0.)); +#170140 = ORIENTED_EDGE('',*,*,#170141,.F.); +#170141 = EDGE_CURVE('',#170142,#170134,#170144,.T.); +#170142 = VERTEX_POINT('',#170143); +#170143 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170144 = LINE('',#170145,#170146); +#170145 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170146 = VECTOR('',#170147,1.); +#170147 = DIRECTION('',(0.,0.,1.)); +#170148 = ORIENTED_EDGE('',*,*,#170149,.T.); +#170149 = EDGE_CURVE('',#170142,#170124,#170150,.T.); +#170150 = LINE('',#170151,#170152); +#170151 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170152 = VECTOR('',#170153,1.); +#170153 = DIRECTION('',(-0.,-1.,-0.)); +#170154 = PLANE('',#170155); +#170155 = AXIS2_PLACEMENT_3D('',#170156,#170157,#170158); +#170156 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170157 = DIRECTION('',(1.,0.,0.)); +#170158 = DIRECTION('',(0.,0.,-1.)); +#170159 = ADVANCED_FACE('',(#170160),#170185,.F.); +#170160 = FACE_BOUND('',#170161,.T.); +#170161 = EDGE_LOOP('',(#170162,#170170,#170178,#170184)); +#170162 = ORIENTED_EDGE('',*,*,#170163,.T.); +#170163 = EDGE_CURVE('',#170126,#170164,#170166,.T.); +#170164 = VERTEX_POINT('',#170165); +#170165 = CARTESIAN_POINT('',(-0.8,0.,0.9)); +#170166 = LINE('',#170167,#170168); +#170167 = CARTESIAN_POINT('',(-1.1,0.,0.9)); +#170168 = VECTOR('',#170169,1.); +#170169 = DIRECTION('',(1.,0.,0.)); +#170170 = ORIENTED_EDGE('',*,*,#170171,.F.); +#170171 = EDGE_CURVE('',#170172,#170164,#170174,.T.); +#170172 = VERTEX_POINT('',#170173); +#170173 = CARTESIAN_POINT('',(-0.8,0.1,0.9)); +#170174 = LINE('',#170175,#170176); +#170175 = CARTESIAN_POINT('',(-0.8,0.1,0.9)); +#170176 = VECTOR('',#170177,1.); +#170177 = DIRECTION('',(-0.,-1.,-0.)); +#170178 = ORIENTED_EDGE('',*,*,#170179,.F.); +#170179 = EDGE_CURVE('',#170134,#170172,#170180,.T.); +#170180 = LINE('',#170181,#170182); +#170181 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#170182 = VECTOR('',#170183,1.); +#170183 = DIRECTION('',(1.,0.,0.)); +#170184 = ORIENTED_EDGE('',*,*,#170133,.T.); +#170185 = PLANE('',#170186); +#170186 = AXIS2_PLACEMENT_3D('',#170187,#170188,#170189); +#170187 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#170188 = DIRECTION('',(0.,0.,-1.)); +#170189 = DIRECTION('',(-1.,0.,-0.)); +#170190 = ADVANCED_FACE('',(#170191),#170216,.F.); +#170191 = FACE_BOUND('',#170192,.T.); +#170192 = EDGE_LOOP('',(#170193,#170201,#170209,#170215)); +#170193 = ORIENTED_EDGE('',*,*,#170194,.T.); +#170194 = EDGE_CURVE('',#170164,#170195,#170197,.T.); +#170195 = VERTEX_POINT('',#170196); +#170196 = CARTESIAN_POINT('',(-0.8,0.,0.7)); +#170197 = LINE('',#170198,#170199); +#170198 = CARTESIAN_POINT('',(-0.8,0.,0.7)); +#170199 = VECTOR('',#170200,1.); +#170200 = DIRECTION('',(-0.,-0.,-1.)); +#170201 = ORIENTED_EDGE('',*,*,#170202,.F.); +#170202 = EDGE_CURVE('',#170203,#170195,#170205,.T.); +#170203 = VERTEX_POINT('',#170204); +#170204 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#170205 = LINE('',#170206,#170207); +#170206 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#170207 = VECTOR('',#170208,1.); +#170208 = DIRECTION('',(-0.,-1.,-0.)); +#170209 = ORIENTED_EDGE('',*,*,#170210,.F.); +#170210 = EDGE_CURVE('',#170172,#170203,#170211,.T.); +#170211 = LINE('',#170212,#170213); +#170212 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#170213 = VECTOR('',#170214,1.); +#170214 = DIRECTION('',(-0.,-0.,-1.)); +#170215 = ORIENTED_EDGE('',*,*,#170171,.T.); +#170216 = PLANE('',#170217); +#170217 = AXIS2_PLACEMENT_3D('',#170218,#170219,#170220); +#170218 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#170219 = DIRECTION('',(-1.,0.,0.)); +#170220 = DIRECTION('',(0.,0.,1.)); +#170221 = ADVANCED_FACE('',(#170222),#170238,.F.); +#170222 = FACE_BOUND('',#170223,.T.); +#170223 = EDGE_LOOP('',(#170224,#170230,#170231,#170237)); +#170224 = ORIENTED_EDGE('',*,*,#170225,.T.); +#170225 = EDGE_CURVE('',#170195,#170124,#170226,.T.); +#170226 = LINE('',#170227,#170228); +#170227 = CARTESIAN_POINT('',(-1.1,0.,0.7)); +#170228 = VECTOR('',#170229,1.); +#170229 = DIRECTION('',(-1.,-0.,-0.)); +#170230 = ORIENTED_EDGE('',*,*,#170149,.F.); +#170231 = ORIENTED_EDGE('',*,*,#170232,.F.); +#170232 = EDGE_CURVE('',#170203,#170142,#170233,.T.); +#170233 = LINE('',#170234,#170235); +#170234 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170235 = VECTOR('',#170236,1.); +#170236 = DIRECTION('',(-1.,-0.,-0.)); +#170237 = ORIENTED_EDGE('',*,*,#170202,.T.); +#170238 = PLANE('',#170239); +#170239 = AXIS2_PLACEMENT_3D('',#170240,#170241,#170242); +#170240 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#170241 = DIRECTION('',(0.,0.,1.)); +#170242 = DIRECTION('',(1.,0.,-0.)); +#170243 = ADVANCED_FACE('',(#170244),#170250,.T.); +#170244 = FACE_BOUND('',#170245,.T.); +#170245 = EDGE_LOOP('',(#170246,#170247,#170248,#170249)); +#170246 = ORIENTED_EDGE('',*,*,#170179,.T.); +#170247 = ORIENTED_EDGE('',*,*,#170210,.T.); +#170248 = ORIENTED_EDGE('',*,*,#170232,.T.); +#170249 = ORIENTED_EDGE('',*,*,#170141,.T.); +#170250 = PLANE('',#170251); +#170251 = AXIS2_PLACEMENT_3D('',#170252,#170253,#170254); +#170252 = CARTESIAN_POINT('',(0.,0.1,0.)); +#170253 = DIRECTION('',(0.,1.,0.)); +#170254 = DIRECTION('',(0.,-0.,1.)); +#170255 = ADVANCED_FACE('',(#170256),#170262,.F.); +#170256 = FACE_BOUND('',#170257,.T.); +#170257 = EDGE_LOOP('',(#170258,#170259,#170260,#170261)); +#170258 = ORIENTED_EDGE('',*,*,#170123,.F.); +#170259 = ORIENTED_EDGE('',*,*,#170225,.F.); +#170260 = ORIENTED_EDGE('',*,*,#170194,.F.); +#170261 = ORIENTED_EDGE('',*,*,#170163,.F.); +#170262 = PLANE('',#170263); +#170263 = AXIS2_PLACEMENT_3D('',#170264,#170265,#170266); +#170264 = CARTESIAN_POINT('',(0.,0.,0.)); +#170265 = DIRECTION('',(0.,1.,0.)); +#170266 = DIRECTION('',(0.,-0.,1.)); +#170267 = MANIFOLD_SOLID_BREP('',#170268); +#170268 = CLOSED_SHELL('',(#170269,#170309,#170340,#170371,#170402, + #170424,#170437)); +#170269 = ADVANCED_FACE('',(#170270),#170304,.F.); +#170270 = FACE_BOUND('',#170271,.T.); +#170271 = EDGE_LOOP('',(#170272,#170282,#170290,#170298)); +#170272 = ORIENTED_EDGE('',*,*,#170273,.T.); +#170273 = EDGE_CURVE('',#170274,#170276,#170278,.T.); +#170274 = VERTEX_POINT('',#170275); +#170275 = CARTESIAN_POINT('',(0.45,0.,0.75)); +#170276 = VERTEX_POINT('',#170277); +#170277 = CARTESIAN_POINT('',(0.45,0.,-0.75)); +#170278 = LINE('',#170279,#170280); +#170279 = CARTESIAN_POINT('',(0.45,0.,0.75)); +#170280 = VECTOR('',#170281,1.); +#170281 = DIRECTION('',(0.,0.,-1.)); +#170282 = ORIENTED_EDGE('',*,*,#170283,.F.); +#170283 = EDGE_CURVE('',#170284,#170276,#170286,.T.); +#170284 = VERTEX_POINT('',#170285); +#170285 = CARTESIAN_POINT('',(0.45,0.1,-0.75)); +#170286 = LINE('',#170287,#170288); +#170287 = CARTESIAN_POINT('',(0.45,0.1,-0.75)); +#170288 = VECTOR('',#170289,1.); +#170289 = DIRECTION('',(-0.,-1.,-0.)); +#170290 = ORIENTED_EDGE('',*,*,#170291,.F.); +#170291 = EDGE_CURVE('',#170292,#170284,#170294,.T.); +#170292 = VERTEX_POINT('',#170293); +#170293 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#170294 = LINE('',#170295,#170296); +#170295 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#170296 = VECTOR('',#170297,1.); +#170297 = DIRECTION('',(0.,0.,-1.)); +#170298 = ORIENTED_EDGE('',*,*,#170299,.T.); +#170299 = EDGE_CURVE('',#170292,#170274,#170300,.T.); +#170300 = LINE('',#170301,#170302); +#170301 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#170302 = VECTOR('',#170303,1.); +#170303 = DIRECTION('',(-0.,-1.,-0.)); +#170304 = PLANE('',#170305); +#170305 = AXIS2_PLACEMENT_3D('',#170306,#170307,#170308); +#170306 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#170307 = DIRECTION('',(-1.,0.,0.)); +#170308 = DIRECTION('',(0.,0.,1.)); +#170309 = ADVANCED_FACE('',(#170310),#170335,.F.); +#170310 = FACE_BOUND('',#170311,.T.); +#170311 = EDGE_LOOP('',(#170312,#170320,#170328,#170334)); +#170312 = ORIENTED_EDGE('',*,*,#170313,.T.); +#170313 = EDGE_CURVE('',#170276,#170314,#170316,.T.); +#170314 = VERTEX_POINT('',#170315); +#170315 = CARTESIAN_POINT('',(-0.225,0.,-0.75)); +#170316 = LINE('',#170317,#170318); +#170317 = CARTESIAN_POINT('',(-0.225,0.,-0.75)); +#170318 = VECTOR('',#170319,1.); +#170319 = DIRECTION('',(-1.,-0.,-0.)); +#170320 = ORIENTED_EDGE('',*,*,#170321,.F.); +#170321 = EDGE_CURVE('',#170322,#170314,#170324,.T.); +#170322 = VERTEX_POINT('',#170323); +#170323 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#170324 = LINE('',#170325,#170326); +#170325 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#170326 = VECTOR('',#170327,1.); +#170327 = DIRECTION('',(-0.,-1.,-0.)); +#170328 = ORIENTED_EDGE('',*,*,#170329,.F.); +#170329 = EDGE_CURVE('',#170284,#170322,#170330,.T.); +#170330 = LINE('',#170331,#170332); +#170331 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#170332 = VECTOR('',#170333,1.); +#170333 = DIRECTION('',(-1.,-0.,-0.)); +#170334 = ORIENTED_EDGE('',*,*,#170283,.T.); +#170335 = PLANE('',#170336); +#170336 = AXIS2_PLACEMENT_3D('',#170337,#170338,#170339); +#170337 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#170338 = DIRECTION('',(0.,0.,1.)); +#170339 = DIRECTION('',(1.,0.,-0.)); +#170340 = ADVANCED_FACE('',(#170341),#170366,.F.); +#170341 = FACE_BOUND('',#170342,.T.); +#170342 = EDGE_LOOP('',(#170343,#170351,#170359,#170365)); +#170343 = ORIENTED_EDGE('',*,*,#170344,.T.); +#170344 = EDGE_CURVE('',#170314,#170345,#170347,.T.); +#170345 = VERTEX_POINT('',#170346); +#170346 = CARTESIAN_POINT('',(-0.45,0.,-0.525)); +#170347 = LINE('',#170348,#170349); +#170348 = CARTESIAN_POINT('',(-0.45,0.,-0.525)); +#170349 = VECTOR('',#170350,1.); +#170350 = DIRECTION('',(-0.707106781187,-0.,0.707106781187)); +#170351 = ORIENTED_EDGE('',*,*,#170352,.F.); +#170352 = EDGE_CURVE('',#170353,#170345,#170355,.T.); +#170353 = VERTEX_POINT('',#170354); +#170354 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#170355 = LINE('',#170356,#170357); +#170356 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#170357 = VECTOR('',#170358,1.); +#170358 = DIRECTION('',(-0.,-1.,-0.)); +#170359 = ORIENTED_EDGE('',*,*,#170360,.F.); +#170360 = EDGE_CURVE('',#170322,#170353,#170361,.T.); +#170361 = LINE('',#170362,#170363); +#170362 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#170363 = VECTOR('',#170364,1.); +#170364 = DIRECTION('',(-0.707106781187,-0.,0.707106781187)); +#170365 = ORIENTED_EDGE('',*,*,#170321,.T.); +#170366 = PLANE('',#170367); +#170367 = AXIS2_PLACEMENT_3D('',#170368,#170369,#170370); +#170368 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#170369 = DIRECTION('',(0.707106781187,-0.,0.707106781187)); +#170370 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#170371 = ADVANCED_FACE('',(#170372),#170397,.F.); +#170372 = FACE_BOUND('',#170373,.T.); +#170373 = EDGE_LOOP('',(#170374,#170382,#170390,#170396)); +#170374 = ORIENTED_EDGE('',*,*,#170375,.T.); +#170375 = EDGE_CURVE('',#170345,#170376,#170378,.T.); +#170376 = VERTEX_POINT('',#170377); +#170377 = CARTESIAN_POINT('',(-0.45,0.,0.75)); +#170378 = LINE('',#170379,#170380); +#170379 = CARTESIAN_POINT('',(-0.45,0.,0.75)); +#170380 = VECTOR('',#170381,1.); +#170381 = DIRECTION('',(-0.,-0.,1.)); +#170382 = ORIENTED_EDGE('',*,*,#170383,.F.); +#170383 = EDGE_CURVE('',#170384,#170376,#170386,.T.); +#170384 = VERTEX_POINT('',#170385); +#170385 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170386 = LINE('',#170387,#170388); +#170387 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170388 = VECTOR('',#170389,1.); +#170389 = DIRECTION('',(-0.,-1.,-0.)); +#170390 = ORIENTED_EDGE('',*,*,#170391,.F.); +#170391 = EDGE_CURVE('',#170353,#170384,#170392,.T.); +#170392 = LINE('',#170393,#170394); +#170393 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170394 = VECTOR('',#170395,1.); +#170395 = DIRECTION('',(-0.,-0.,1.)); +#170396 = ORIENTED_EDGE('',*,*,#170352,.T.); +#170397 = PLANE('',#170398); +#170398 = AXIS2_PLACEMENT_3D('',#170399,#170400,#170401); +#170399 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170400 = DIRECTION('',(1.,-0.,0.)); +#170401 = DIRECTION('',(0.,0.,-1.)); +#170402 = ADVANCED_FACE('',(#170403),#170419,.F.); +#170403 = FACE_BOUND('',#170404,.T.); +#170404 = EDGE_LOOP('',(#170405,#170411,#170412,#170418)); +#170405 = ORIENTED_EDGE('',*,*,#170406,.T.); +#170406 = EDGE_CURVE('',#170376,#170274,#170407,.T.); +#170407 = LINE('',#170408,#170409); +#170408 = CARTESIAN_POINT('',(-0.45,0.,0.75)); +#170409 = VECTOR('',#170410,1.); +#170410 = DIRECTION('',(1.,0.,0.)); +#170411 = ORIENTED_EDGE('',*,*,#170299,.F.); +#170412 = ORIENTED_EDGE('',*,*,#170413,.F.); +#170413 = EDGE_CURVE('',#170384,#170292,#170414,.T.); +#170414 = LINE('',#170415,#170416); +#170415 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170416 = VECTOR('',#170417,1.); +#170417 = DIRECTION('',(1.,0.,0.)); +#170418 = ORIENTED_EDGE('',*,*,#170383,.T.); +#170419 = PLANE('',#170420); +#170420 = AXIS2_PLACEMENT_3D('',#170421,#170422,#170423); +#170421 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#170422 = DIRECTION('',(0.,0.,-1.)); +#170423 = DIRECTION('',(-1.,0.,-0.)); +#170424 = ADVANCED_FACE('',(#170425),#170432,.F.); +#170425 = FACE_BOUND('',#170426,.T.); +#170426 = EDGE_LOOP('',(#170427,#170428,#170429,#170430,#170431)); +#170427 = ORIENTED_EDGE('',*,*,#170329,.T.); +#170428 = ORIENTED_EDGE('',*,*,#170360,.T.); +#170429 = ORIENTED_EDGE('',*,*,#170391,.T.); +#170430 = ORIENTED_EDGE('',*,*,#170413,.T.); +#170431 = ORIENTED_EDGE('',*,*,#170291,.T.); +#170432 = PLANE('',#170433); +#170433 = AXIS2_PLACEMENT_3D('',#170434,#170435,#170436); +#170434 = CARTESIAN_POINT('',(0.,0.1,0.)); +#170435 = DIRECTION('',(0.,-1.,0.)); +#170436 = DIRECTION('',(0.,-0.,-1.)); +#170437 = ADVANCED_FACE('',(#170438),#170445,.T.); +#170438 = FACE_BOUND('',#170439,.T.); +#170439 = EDGE_LOOP('',(#170440,#170441,#170442,#170443,#170444)); +#170440 = ORIENTED_EDGE('',*,*,#170273,.F.); +#170441 = ORIENTED_EDGE('',*,*,#170406,.F.); +#170442 = ORIENTED_EDGE('',*,*,#170375,.F.); +#170443 = ORIENTED_EDGE('',*,*,#170344,.F.); +#170444 = ORIENTED_EDGE('',*,*,#170313,.F.); +#170445 = PLANE('',#170446); +#170446 = AXIS2_PLACEMENT_3D('',#170447,#170448,#170449); +#170447 = CARTESIAN_POINT('',(0.,0.,0.)); +#170448 = DIRECTION('',(0.,-1.,0.)); +#170449 = DIRECTION('',(0.,-0.,-1.)); +#170450 = MANIFOLD_SOLID_BREP('',#170451); +#170451 = CLOSED_SHELL('',(#170452,#170492,#170523,#170554,#170576, + #170588)); +#170452 = ADVANCED_FACE('',(#170453),#170487,.F.); +#170453 = FACE_BOUND('',#170454,.T.); +#170454 = EDGE_LOOP('',(#170455,#170465,#170473,#170481)); +#170455 = ORIENTED_EDGE('',*,*,#170456,.T.); +#170456 = EDGE_CURVE('',#170457,#170459,#170461,.T.); +#170457 = VERTEX_POINT('',#170458); +#170458 = CARTESIAN_POINT('',(-1.1,0.,-0.9)); +#170459 = VERTEX_POINT('',#170460); +#170460 = CARTESIAN_POINT('',(-1.1,0.,-0.7)); +#170461 = LINE('',#170462,#170463); +#170462 = CARTESIAN_POINT('',(-1.1,0.,-0.9)); +#170463 = VECTOR('',#170464,1.); +#170464 = DIRECTION('',(0.,0.,1.)); +#170465 = ORIENTED_EDGE('',*,*,#170466,.F.); +#170466 = EDGE_CURVE('',#170467,#170459,#170469,.T.); +#170467 = VERTEX_POINT('',#170468); +#170468 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#170469 = LINE('',#170470,#170471); +#170470 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#170471 = VECTOR('',#170472,1.); +#170472 = DIRECTION('',(-0.,-1.,-0.)); +#170473 = ORIENTED_EDGE('',*,*,#170474,.F.); +#170474 = EDGE_CURVE('',#170475,#170467,#170477,.T.); +#170475 = VERTEX_POINT('',#170476); +#170476 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170477 = LINE('',#170478,#170479); +#170478 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170479 = VECTOR('',#170480,1.); +#170480 = DIRECTION('',(0.,0.,1.)); +#170481 = ORIENTED_EDGE('',*,*,#170482,.T.); +#170482 = EDGE_CURVE('',#170475,#170457,#170483,.T.); +#170483 = LINE('',#170484,#170485); +#170484 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170485 = VECTOR('',#170486,1.); +#170486 = DIRECTION('',(-0.,-1.,-0.)); +#170487 = PLANE('',#170488); +#170488 = AXIS2_PLACEMENT_3D('',#170489,#170490,#170491); +#170489 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170490 = DIRECTION('',(1.,0.,0.)); +#170491 = DIRECTION('',(0.,0.,-1.)); +#170492 = ADVANCED_FACE('',(#170493),#170518,.F.); +#170493 = FACE_BOUND('',#170494,.T.); +#170494 = EDGE_LOOP('',(#170495,#170503,#170511,#170517)); +#170495 = ORIENTED_EDGE('',*,*,#170496,.T.); +#170496 = EDGE_CURVE('',#170459,#170497,#170499,.T.); +#170497 = VERTEX_POINT('',#170498); +#170498 = CARTESIAN_POINT('',(-0.8,0.,-0.7)); +#170499 = LINE('',#170500,#170501); +#170500 = CARTESIAN_POINT('',(-1.1,0.,-0.7)); +#170501 = VECTOR('',#170502,1.); +#170502 = DIRECTION('',(1.,0.,0.)); +#170503 = ORIENTED_EDGE('',*,*,#170504,.F.); +#170504 = EDGE_CURVE('',#170505,#170497,#170507,.T.); +#170505 = VERTEX_POINT('',#170506); +#170506 = CARTESIAN_POINT('',(-0.8,0.1,-0.7)); +#170507 = LINE('',#170508,#170509); +#170508 = CARTESIAN_POINT('',(-0.8,0.1,-0.7)); +#170509 = VECTOR('',#170510,1.); +#170510 = DIRECTION('',(-0.,-1.,-0.)); +#170511 = ORIENTED_EDGE('',*,*,#170512,.F.); +#170512 = EDGE_CURVE('',#170467,#170505,#170513,.T.); +#170513 = LINE('',#170514,#170515); +#170514 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#170515 = VECTOR('',#170516,1.); +#170516 = DIRECTION('',(1.,0.,0.)); +#170517 = ORIENTED_EDGE('',*,*,#170466,.T.); +#170518 = PLANE('',#170519); +#170519 = AXIS2_PLACEMENT_3D('',#170520,#170521,#170522); +#170520 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#170521 = DIRECTION('',(0.,0.,-1.)); +#170522 = DIRECTION('',(-1.,0.,-0.)); +#170523 = ADVANCED_FACE('',(#170524),#170549,.F.); +#170524 = FACE_BOUND('',#170525,.T.); +#170525 = EDGE_LOOP('',(#170526,#170534,#170542,#170548)); +#170526 = ORIENTED_EDGE('',*,*,#170527,.T.); +#170527 = EDGE_CURVE('',#170497,#170528,#170530,.T.); +#170528 = VERTEX_POINT('',#170529); +#170529 = CARTESIAN_POINT('',(-0.8,0.,-0.9)); +#170530 = LINE('',#170531,#170532); +#170531 = CARTESIAN_POINT('',(-0.8,0.,-0.9)); +#170532 = VECTOR('',#170533,1.); +#170533 = DIRECTION('',(-0.,-0.,-1.)); +#170534 = ORIENTED_EDGE('',*,*,#170535,.F.); +#170535 = EDGE_CURVE('',#170536,#170528,#170538,.T.); +#170536 = VERTEX_POINT('',#170537); +#170537 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#170538 = LINE('',#170539,#170540); +#170539 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#170540 = VECTOR('',#170541,1.); +#170541 = DIRECTION('',(-0.,-1.,-0.)); +#170542 = ORIENTED_EDGE('',*,*,#170543,.F.); +#170543 = EDGE_CURVE('',#170505,#170536,#170544,.T.); +#170544 = LINE('',#170545,#170546); +#170545 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#170546 = VECTOR('',#170547,1.); +#170547 = DIRECTION('',(-0.,-0.,-1.)); +#170548 = ORIENTED_EDGE('',*,*,#170504,.T.); +#170549 = PLANE('',#170550); +#170550 = AXIS2_PLACEMENT_3D('',#170551,#170552,#170553); +#170551 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#170552 = DIRECTION('',(-1.,0.,0.)); +#170553 = DIRECTION('',(0.,0.,1.)); +#170554 = ADVANCED_FACE('',(#170555),#170571,.F.); +#170555 = FACE_BOUND('',#170556,.T.); +#170556 = EDGE_LOOP('',(#170557,#170563,#170564,#170570)); +#170557 = ORIENTED_EDGE('',*,*,#170558,.T.); +#170558 = EDGE_CURVE('',#170528,#170457,#170559,.T.); +#170559 = LINE('',#170560,#170561); +#170560 = CARTESIAN_POINT('',(-1.1,0.,-0.9)); +#170561 = VECTOR('',#170562,1.); +#170562 = DIRECTION('',(-1.,-0.,-0.)); +#170563 = ORIENTED_EDGE('',*,*,#170482,.F.); +#170564 = ORIENTED_EDGE('',*,*,#170565,.F.); +#170565 = EDGE_CURVE('',#170536,#170475,#170566,.T.); +#170566 = LINE('',#170567,#170568); +#170567 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170568 = VECTOR('',#170569,1.); +#170569 = DIRECTION('',(-1.,-0.,-0.)); +#170570 = ORIENTED_EDGE('',*,*,#170535,.T.); +#170571 = PLANE('',#170572); +#170572 = AXIS2_PLACEMENT_3D('',#170573,#170574,#170575); +#170573 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#170574 = DIRECTION('',(0.,0.,1.)); +#170575 = DIRECTION('',(1.,0.,-0.)); +#170576 = ADVANCED_FACE('',(#170577),#170583,.T.); +#170577 = FACE_BOUND('',#170578,.T.); +#170578 = EDGE_LOOP('',(#170579,#170580,#170581,#170582)); +#170579 = ORIENTED_EDGE('',*,*,#170512,.T.); +#170580 = ORIENTED_EDGE('',*,*,#170543,.T.); +#170581 = ORIENTED_EDGE('',*,*,#170565,.T.); +#170582 = ORIENTED_EDGE('',*,*,#170474,.T.); +#170583 = PLANE('',#170584); +#170584 = AXIS2_PLACEMENT_3D('',#170585,#170586,#170587); +#170585 = CARTESIAN_POINT('',(0.,0.1,0.)); +#170586 = DIRECTION('',(0.,1.,0.)); +#170587 = DIRECTION('',(0.,-0.,1.)); +#170588 = ADVANCED_FACE('',(#170589),#170595,.F.); +#170589 = FACE_BOUND('',#170590,.T.); +#170590 = EDGE_LOOP('',(#170591,#170592,#170593,#170594)); +#170591 = ORIENTED_EDGE('',*,*,#170456,.F.); +#170592 = ORIENTED_EDGE('',*,*,#170558,.F.); +#170593 = ORIENTED_EDGE('',*,*,#170527,.F.); +#170594 = ORIENTED_EDGE('',*,*,#170496,.F.); +#170595 = PLANE('',#170596); +#170596 = AXIS2_PLACEMENT_3D('',#170597,#170598,#170599); +#170597 = CARTESIAN_POINT('',(0.,0.,0.)); +#170598 = DIRECTION('',(0.,1.,0.)); +#170599 = DIRECTION('',(0.,-0.,1.)); +#170600 = MANIFOLD_SOLID_BREP('',#170601); +#170601 = CLOSED_SHELL('',(#170602,#170642,#170673,#170704,#170726, + #170738)); +#170602 = ADVANCED_FACE('',(#170603),#170637,.F.); +#170603 = FACE_BOUND('',#170604,.T.); +#170604 = EDGE_LOOP('',(#170605,#170615,#170623,#170631)); +#170605 = ORIENTED_EDGE('',*,*,#170606,.T.); +#170606 = EDGE_CURVE('',#170607,#170609,#170611,.T.); +#170607 = VERTEX_POINT('',#170608); +#170608 = CARTESIAN_POINT('',(0.8,0.,-0.9)); +#170609 = VERTEX_POINT('',#170610); +#170610 = CARTESIAN_POINT('',(0.8,0.,-0.7)); +#170611 = LINE('',#170612,#170613); +#170612 = CARTESIAN_POINT('',(0.8,0.,-0.9)); +#170613 = VECTOR('',#170614,1.); +#170614 = DIRECTION('',(0.,0.,1.)); +#170615 = ORIENTED_EDGE('',*,*,#170616,.F.); +#170616 = EDGE_CURVE('',#170617,#170609,#170619,.T.); +#170617 = VERTEX_POINT('',#170618); +#170618 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#170619 = LINE('',#170620,#170621); +#170620 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#170621 = VECTOR('',#170622,1.); +#170622 = DIRECTION('',(-0.,-1.,-0.)); +#170623 = ORIENTED_EDGE('',*,*,#170624,.F.); +#170624 = EDGE_CURVE('',#170625,#170617,#170627,.T.); +#170625 = VERTEX_POINT('',#170626); +#170626 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170627 = LINE('',#170628,#170629); +#170628 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170629 = VECTOR('',#170630,1.); +#170630 = DIRECTION('',(0.,0.,1.)); +#170631 = ORIENTED_EDGE('',*,*,#170632,.T.); +#170632 = EDGE_CURVE('',#170625,#170607,#170633,.T.); +#170633 = LINE('',#170634,#170635); +#170634 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170635 = VECTOR('',#170636,1.); +#170636 = DIRECTION('',(-0.,-1.,-0.)); +#170637 = PLANE('',#170638); +#170638 = AXIS2_PLACEMENT_3D('',#170639,#170640,#170641); +#170639 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170640 = DIRECTION('',(1.,0.,0.)); +#170641 = DIRECTION('',(0.,0.,-1.)); +#170642 = ADVANCED_FACE('',(#170643),#170668,.F.); +#170643 = FACE_BOUND('',#170644,.T.); +#170644 = EDGE_LOOP('',(#170645,#170653,#170661,#170667)); +#170645 = ORIENTED_EDGE('',*,*,#170646,.T.); +#170646 = EDGE_CURVE('',#170609,#170647,#170649,.T.); +#170647 = VERTEX_POINT('',#170648); +#170648 = CARTESIAN_POINT('',(1.1,0.,-0.7)); +#170649 = LINE('',#170650,#170651); +#170650 = CARTESIAN_POINT('',(0.8,0.,-0.7)); +#170651 = VECTOR('',#170652,1.); +#170652 = DIRECTION('',(1.,0.,0.)); +#170653 = ORIENTED_EDGE('',*,*,#170654,.F.); +#170654 = EDGE_CURVE('',#170655,#170647,#170657,.T.); +#170655 = VERTEX_POINT('',#170656); +#170656 = CARTESIAN_POINT('',(1.1,0.1,-0.7)); +#170657 = LINE('',#170658,#170659); +#170658 = CARTESIAN_POINT('',(1.1,0.1,-0.7)); +#170659 = VECTOR('',#170660,1.); +#170660 = DIRECTION('',(-0.,-1.,-0.)); +#170661 = ORIENTED_EDGE('',*,*,#170662,.F.); +#170662 = EDGE_CURVE('',#170617,#170655,#170663,.T.); +#170663 = LINE('',#170664,#170665); +#170664 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#170665 = VECTOR('',#170666,1.); +#170666 = DIRECTION('',(1.,0.,0.)); +#170667 = ORIENTED_EDGE('',*,*,#170616,.T.); +#170668 = PLANE('',#170669); +#170669 = AXIS2_PLACEMENT_3D('',#170670,#170671,#170672); +#170670 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#170671 = DIRECTION('',(0.,0.,-1.)); +#170672 = DIRECTION('',(-1.,0.,-0.)); +#170673 = ADVANCED_FACE('',(#170674),#170699,.F.); +#170674 = FACE_BOUND('',#170675,.T.); +#170675 = EDGE_LOOP('',(#170676,#170684,#170692,#170698)); +#170676 = ORIENTED_EDGE('',*,*,#170677,.T.); +#170677 = EDGE_CURVE('',#170647,#170678,#170680,.T.); +#170678 = VERTEX_POINT('',#170679); +#170679 = CARTESIAN_POINT('',(1.1,0.,-0.9)); +#170680 = LINE('',#170681,#170682); +#170681 = CARTESIAN_POINT('',(1.1,0.,-0.9)); +#170682 = VECTOR('',#170683,1.); +#170683 = DIRECTION('',(-0.,-0.,-1.)); +#170684 = ORIENTED_EDGE('',*,*,#170685,.F.); +#170685 = EDGE_CURVE('',#170686,#170678,#170688,.T.); +#170686 = VERTEX_POINT('',#170687); +#170687 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#170688 = LINE('',#170689,#170690); +#170689 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#170690 = VECTOR('',#170691,1.); +#170691 = DIRECTION('',(-0.,-1.,-0.)); +#170692 = ORIENTED_EDGE('',*,*,#170693,.F.); +#170693 = EDGE_CURVE('',#170655,#170686,#170694,.T.); +#170694 = LINE('',#170695,#170696); +#170695 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#170696 = VECTOR('',#170697,1.); +#170697 = DIRECTION('',(-0.,-0.,-1.)); +#170698 = ORIENTED_EDGE('',*,*,#170654,.T.); +#170699 = PLANE('',#170700); +#170700 = AXIS2_PLACEMENT_3D('',#170701,#170702,#170703); +#170701 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#170702 = DIRECTION('',(-1.,0.,0.)); +#170703 = DIRECTION('',(0.,0.,1.)); +#170704 = ADVANCED_FACE('',(#170705),#170721,.F.); +#170705 = FACE_BOUND('',#170706,.T.); +#170706 = EDGE_LOOP('',(#170707,#170713,#170714,#170720)); +#170707 = ORIENTED_EDGE('',*,*,#170708,.T.); +#170708 = EDGE_CURVE('',#170678,#170607,#170709,.T.); +#170709 = LINE('',#170710,#170711); +#170710 = CARTESIAN_POINT('',(0.8,0.,-0.9)); +#170711 = VECTOR('',#170712,1.); +#170712 = DIRECTION('',(-1.,-0.,-0.)); +#170713 = ORIENTED_EDGE('',*,*,#170632,.F.); +#170714 = ORIENTED_EDGE('',*,*,#170715,.F.); +#170715 = EDGE_CURVE('',#170686,#170625,#170716,.T.); +#170716 = LINE('',#170717,#170718); +#170717 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170718 = VECTOR('',#170719,1.); +#170719 = DIRECTION('',(-1.,-0.,-0.)); +#170720 = ORIENTED_EDGE('',*,*,#170685,.T.); +#170721 = PLANE('',#170722); +#170722 = AXIS2_PLACEMENT_3D('',#170723,#170724,#170725); +#170723 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#170724 = DIRECTION('',(0.,0.,1.)); +#170725 = DIRECTION('',(1.,0.,-0.)); +#170726 = ADVANCED_FACE('',(#170727),#170733,.T.); +#170727 = FACE_BOUND('',#170728,.T.); +#170728 = EDGE_LOOP('',(#170729,#170730,#170731,#170732)); +#170729 = ORIENTED_EDGE('',*,*,#170662,.T.); +#170730 = ORIENTED_EDGE('',*,*,#170693,.T.); +#170731 = ORIENTED_EDGE('',*,*,#170715,.T.); +#170732 = ORIENTED_EDGE('',*,*,#170624,.T.); +#170733 = PLANE('',#170734); +#170734 = AXIS2_PLACEMENT_3D('',#170735,#170736,#170737); +#170735 = CARTESIAN_POINT('',(0.,0.1,0.)); +#170736 = DIRECTION('',(0.,1.,0.)); +#170737 = DIRECTION('',(0.,-0.,1.)); +#170738 = ADVANCED_FACE('',(#170739),#170745,.F.); +#170739 = FACE_BOUND('',#170740,.T.); +#170740 = EDGE_LOOP('',(#170741,#170742,#170743,#170744)); +#170741 = ORIENTED_EDGE('',*,*,#170606,.F.); +#170742 = ORIENTED_EDGE('',*,*,#170708,.F.); +#170743 = ORIENTED_EDGE('',*,*,#170677,.F.); +#170744 = ORIENTED_EDGE('',*,*,#170646,.F.); +#170745 = PLANE('',#170746); +#170746 = AXIS2_PLACEMENT_3D('',#170747,#170748,#170749); +#170747 = CARTESIAN_POINT('',(0.,0.,0.)); +#170748 = DIRECTION('',(0.,1.,0.)); +#170749 = DIRECTION('',(0.,-0.,1.)); +#170750 = MANIFOLD_SOLID_BREP('',#170751); +#170751 = CLOSED_SHELL('',(#170752,#170792,#170823,#170854,#170876, + #170888)); +#170752 = ADVANCED_FACE('',(#170753),#170787,.F.); +#170753 = FACE_BOUND('',#170754,.T.); +#170754 = EDGE_LOOP('',(#170755,#170765,#170773,#170781)); +#170755 = ORIENTED_EDGE('',*,*,#170756,.T.); +#170756 = EDGE_CURVE('',#170757,#170759,#170761,.T.); +#170757 = VERTEX_POINT('',#170758); +#170758 = CARTESIAN_POINT('',(0.8,0.,-0.5)); +#170759 = VERTEX_POINT('',#170760); +#170760 = CARTESIAN_POINT('',(0.8,0.,-0.3)); +#170761 = LINE('',#170762,#170763); +#170762 = CARTESIAN_POINT('',(0.8,0.,-0.5)); +#170763 = VECTOR('',#170764,1.); +#170764 = DIRECTION('',(0.,0.,1.)); +#170765 = ORIENTED_EDGE('',*,*,#170766,.F.); +#170766 = EDGE_CURVE('',#170767,#170759,#170769,.T.); +#170767 = VERTEX_POINT('',#170768); +#170768 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#170769 = LINE('',#170770,#170771); +#170770 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#170771 = VECTOR('',#170772,1.); +#170772 = DIRECTION('',(-0.,-1.,-0.)); +#170773 = ORIENTED_EDGE('',*,*,#170774,.F.); +#170774 = EDGE_CURVE('',#170775,#170767,#170777,.T.); +#170775 = VERTEX_POINT('',#170776); +#170776 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170777 = LINE('',#170778,#170779); +#170778 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170779 = VECTOR('',#170780,1.); +#170780 = DIRECTION('',(0.,0.,1.)); +#170781 = ORIENTED_EDGE('',*,*,#170782,.T.); +#170782 = EDGE_CURVE('',#170775,#170757,#170783,.T.); +#170783 = LINE('',#170784,#170785); +#170784 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170785 = VECTOR('',#170786,1.); +#170786 = DIRECTION('',(-0.,-1.,-0.)); +#170787 = PLANE('',#170788); +#170788 = AXIS2_PLACEMENT_3D('',#170789,#170790,#170791); +#170789 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170790 = DIRECTION('',(1.,0.,0.)); +#170791 = DIRECTION('',(0.,0.,-1.)); +#170792 = ADVANCED_FACE('',(#170793),#170818,.F.); +#170793 = FACE_BOUND('',#170794,.T.); +#170794 = EDGE_LOOP('',(#170795,#170803,#170811,#170817)); +#170795 = ORIENTED_EDGE('',*,*,#170796,.T.); +#170796 = EDGE_CURVE('',#170759,#170797,#170799,.T.); +#170797 = VERTEX_POINT('',#170798); +#170798 = CARTESIAN_POINT('',(1.1,0.,-0.3)); +#170799 = LINE('',#170800,#170801); +#170800 = CARTESIAN_POINT('',(0.8,0.,-0.3)); +#170801 = VECTOR('',#170802,1.); +#170802 = DIRECTION('',(1.,0.,0.)); +#170803 = ORIENTED_EDGE('',*,*,#170804,.F.); +#170804 = EDGE_CURVE('',#170805,#170797,#170807,.T.); +#170805 = VERTEX_POINT('',#170806); +#170806 = CARTESIAN_POINT('',(1.1,0.1,-0.3)); +#170807 = LINE('',#170808,#170809); +#170808 = CARTESIAN_POINT('',(1.1,0.1,-0.3)); +#170809 = VECTOR('',#170810,1.); +#170810 = DIRECTION('',(-0.,-1.,-0.)); +#170811 = ORIENTED_EDGE('',*,*,#170812,.F.); +#170812 = EDGE_CURVE('',#170767,#170805,#170813,.T.); +#170813 = LINE('',#170814,#170815); +#170814 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#170815 = VECTOR('',#170816,1.); +#170816 = DIRECTION('',(1.,0.,0.)); +#170817 = ORIENTED_EDGE('',*,*,#170766,.T.); +#170818 = PLANE('',#170819); +#170819 = AXIS2_PLACEMENT_3D('',#170820,#170821,#170822); +#170820 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#170821 = DIRECTION('',(0.,0.,-1.)); +#170822 = DIRECTION('',(-1.,0.,-0.)); +#170823 = ADVANCED_FACE('',(#170824),#170849,.F.); +#170824 = FACE_BOUND('',#170825,.T.); +#170825 = EDGE_LOOP('',(#170826,#170834,#170842,#170848)); +#170826 = ORIENTED_EDGE('',*,*,#170827,.T.); +#170827 = EDGE_CURVE('',#170797,#170828,#170830,.T.); +#170828 = VERTEX_POINT('',#170829); +#170829 = CARTESIAN_POINT('',(1.1,0.,-0.5)); +#170830 = LINE('',#170831,#170832); +#170831 = CARTESIAN_POINT('',(1.1,0.,-0.5)); +#170832 = VECTOR('',#170833,1.); +#170833 = DIRECTION('',(-0.,-0.,-1.)); +#170834 = ORIENTED_EDGE('',*,*,#170835,.F.); +#170835 = EDGE_CURVE('',#170836,#170828,#170838,.T.); +#170836 = VERTEX_POINT('',#170837); +#170837 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#170838 = LINE('',#170839,#170840); +#170839 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#170840 = VECTOR('',#170841,1.); +#170841 = DIRECTION('',(-0.,-1.,-0.)); +#170842 = ORIENTED_EDGE('',*,*,#170843,.F.); +#170843 = EDGE_CURVE('',#170805,#170836,#170844,.T.); +#170844 = LINE('',#170845,#170846); +#170845 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#170846 = VECTOR('',#170847,1.); +#170847 = DIRECTION('',(-0.,-0.,-1.)); +#170848 = ORIENTED_EDGE('',*,*,#170804,.T.); +#170849 = PLANE('',#170850); +#170850 = AXIS2_PLACEMENT_3D('',#170851,#170852,#170853); +#170851 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#170852 = DIRECTION('',(-1.,0.,0.)); +#170853 = DIRECTION('',(0.,0.,1.)); +#170854 = ADVANCED_FACE('',(#170855),#170871,.F.); +#170855 = FACE_BOUND('',#170856,.T.); +#170856 = EDGE_LOOP('',(#170857,#170863,#170864,#170870)); +#170857 = ORIENTED_EDGE('',*,*,#170858,.T.); +#170858 = EDGE_CURVE('',#170828,#170757,#170859,.T.); +#170859 = LINE('',#170860,#170861); +#170860 = CARTESIAN_POINT('',(0.8,0.,-0.5)); +#170861 = VECTOR('',#170862,1.); +#170862 = DIRECTION('',(-1.,-0.,-0.)); +#170863 = ORIENTED_EDGE('',*,*,#170782,.F.); +#170864 = ORIENTED_EDGE('',*,*,#170865,.F.); +#170865 = EDGE_CURVE('',#170836,#170775,#170866,.T.); +#170866 = LINE('',#170867,#170868); +#170867 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170868 = VECTOR('',#170869,1.); +#170869 = DIRECTION('',(-1.,-0.,-0.)); +#170870 = ORIENTED_EDGE('',*,*,#170835,.T.); +#170871 = PLANE('',#170872); +#170872 = AXIS2_PLACEMENT_3D('',#170873,#170874,#170875); +#170873 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#170874 = DIRECTION('',(0.,0.,1.)); +#170875 = DIRECTION('',(1.,0.,-0.)); +#170876 = ADVANCED_FACE('',(#170877),#170883,.T.); +#170877 = FACE_BOUND('',#170878,.T.); +#170878 = EDGE_LOOP('',(#170879,#170880,#170881,#170882)); +#170879 = ORIENTED_EDGE('',*,*,#170812,.T.); +#170880 = ORIENTED_EDGE('',*,*,#170843,.T.); +#170881 = ORIENTED_EDGE('',*,*,#170865,.T.); +#170882 = ORIENTED_EDGE('',*,*,#170774,.T.); +#170883 = PLANE('',#170884); +#170884 = AXIS2_PLACEMENT_3D('',#170885,#170886,#170887); +#170885 = CARTESIAN_POINT('',(0.,0.1,0.)); +#170886 = DIRECTION('',(0.,1.,0.)); +#170887 = DIRECTION('',(0.,-0.,1.)); +#170888 = ADVANCED_FACE('',(#170889),#170895,.F.); +#170889 = FACE_BOUND('',#170890,.T.); +#170890 = EDGE_LOOP('',(#170891,#170892,#170893,#170894)); +#170891 = ORIENTED_EDGE('',*,*,#170756,.F.); +#170892 = ORIENTED_EDGE('',*,*,#170858,.F.); +#170893 = ORIENTED_EDGE('',*,*,#170827,.F.); +#170894 = ORIENTED_EDGE('',*,*,#170796,.F.); +#170895 = PLANE('',#170896); +#170896 = AXIS2_PLACEMENT_3D('',#170897,#170898,#170899); +#170897 = CARTESIAN_POINT('',(0.,0.,0.)); +#170898 = DIRECTION('',(0.,1.,0.)); +#170899 = DIRECTION('',(0.,-0.,1.)); +#170900 = MANIFOLD_SOLID_BREP('',#170901); +#170901 = CLOSED_SHELL('',(#170902,#170942,#170973,#171004,#171026, + #171038)); +#170902 = ADVANCED_FACE('',(#170903),#170937,.F.); +#170903 = FACE_BOUND('',#170904,.T.); +#170904 = EDGE_LOOP('',(#170905,#170915,#170923,#170931)); +#170905 = ORIENTED_EDGE('',*,*,#170906,.T.); +#170906 = EDGE_CURVE('',#170907,#170909,#170911,.T.); +#170907 = VERTEX_POINT('',#170908); +#170908 = CARTESIAN_POINT('',(0.8,0.,-0.1)); +#170909 = VERTEX_POINT('',#170910); +#170910 = CARTESIAN_POINT('',(0.8,0.,0.1)); +#170911 = LINE('',#170912,#170913); +#170912 = CARTESIAN_POINT('',(0.8,0.,-0.1)); +#170913 = VECTOR('',#170914,1.); +#170914 = DIRECTION('',(0.,0.,1.)); +#170915 = ORIENTED_EDGE('',*,*,#170916,.F.); +#170916 = EDGE_CURVE('',#170917,#170909,#170919,.T.); +#170917 = VERTEX_POINT('',#170918); +#170918 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#170919 = LINE('',#170920,#170921); +#170920 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#170921 = VECTOR('',#170922,1.); +#170922 = DIRECTION('',(-0.,-1.,-0.)); +#170923 = ORIENTED_EDGE('',*,*,#170924,.F.); +#170924 = EDGE_CURVE('',#170925,#170917,#170927,.T.); +#170925 = VERTEX_POINT('',#170926); +#170926 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#170927 = LINE('',#170928,#170929); +#170928 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#170929 = VECTOR('',#170930,1.); +#170930 = DIRECTION('',(0.,0.,1.)); +#170931 = ORIENTED_EDGE('',*,*,#170932,.T.); +#170932 = EDGE_CURVE('',#170925,#170907,#170933,.T.); +#170933 = LINE('',#170934,#170935); +#170934 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#170935 = VECTOR('',#170936,1.); +#170936 = DIRECTION('',(-0.,-1.,-0.)); +#170937 = PLANE('',#170938); +#170938 = AXIS2_PLACEMENT_3D('',#170939,#170940,#170941); +#170939 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#170940 = DIRECTION('',(1.,0.,0.)); +#170941 = DIRECTION('',(0.,0.,-1.)); +#170942 = ADVANCED_FACE('',(#170943),#170968,.F.); +#170943 = FACE_BOUND('',#170944,.T.); +#170944 = EDGE_LOOP('',(#170945,#170953,#170961,#170967)); +#170945 = ORIENTED_EDGE('',*,*,#170946,.T.); +#170946 = EDGE_CURVE('',#170909,#170947,#170949,.T.); +#170947 = VERTEX_POINT('',#170948); +#170948 = CARTESIAN_POINT('',(1.1,0.,0.1)); +#170949 = LINE('',#170950,#170951); +#170950 = CARTESIAN_POINT('',(0.8,0.,0.1)); +#170951 = VECTOR('',#170952,1.); +#170952 = DIRECTION('',(1.,0.,0.)); +#170953 = ORIENTED_EDGE('',*,*,#170954,.F.); +#170954 = EDGE_CURVE('',#170955,#170947,#170957,.T.); +#170955 = VERTEX_POINT('',#170956); +#170956 = CARTESIAN_POINT('',(1.1,0.1,0.1)); +#170957 = LINE('',#170958,#170959); +#170958 = CARTESIAN_POINT('',(1.1,0.1,0.1)); +#170959 = VECTOR('',#170960,1.); +#170960 = DIRECTION('',(-0.,-1.,-0.)); +#170961 = ORIENTED_EDGE('',*,*,#170962,.F.); +#170962 = EDGE_CURVE('',#170917,#170955,#170963,.T.); +#170963 = LINE('',#170964,#170965); +#170964 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#170965 = VECTOR('',#170966,1.); +#170966 = DIRECTION('',(1.,0.,0.)); +#170967 = ORIENTED_EDGE('',*,*,#170916,.T.); +#170968 = PLANE('',#170969); +#170969 = AXIS2_PLACEMENT_3D('',#170970,#170971,#170972); +#170970 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#170971 = DIRECTION('',(0.,0.,-1.)); +#170972 = DIRECTION('',(-1.,0.,-0.)); +#170973 = ADVANCED_FACE('',(#170974),#170999,.F.); +#170974 = FACE_BOUND('',#170975,.T.); +#170975 = EDGE_LOOP('',(#170976,#170984,#170992,#170998)); +#170976 = ORIENTED_EDGE('',*,*,#170977,.T.); +#170977 = EDGE_CURVE('',#170947,#170978,#170980,.T.); +#170978 = VERTEX_POINT('',#170979); +#170979 = CARTESIAN_POINT('',(1.1,0.,-0.1)); +#170980 = LINE('',#170981,#170982); +#170981 = CARTESIAN_POINT('',(1.1,0.,-0.1)); +#170982 = VECTOR('',#170983,1.); +#170983 = DIRECTION('',(-0.,-0.,-1.)); +#170984 = ORIENTED_EDGE('',*,*,#170985,.F.); +#170985 = EDGE_CURVE('',#170986,#170978,#170988,.T.); +#170986 = VERTEX_POINT('',#170987); +#170987 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#170988 = LINE('',#170989,#170990); +#170989 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#170990 = VECTOR('',#170991,1.); +#170991 = DIRECTION('',(-0.,-1.,-0.)); +#170992 = ORIENTED_EDGE('',*,*,#170993,.F.); +#170993 = EDGE_CURVE('',#170955,#170986,#170994,.T.); +#170994 = LINE('',#170995,#170996); +#170995 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#170996 = VECTOR('',#170997,1.); +#170997 = DIRECTION('',(-0.,-0.,-1.)); +#170998 = ORIENTED_EDGE('',*,*,#170954,.T.); +#170999 = PLANE('',#171000); +#171000 = AXIS2_PLACEMENT_3D('',#171001,#171002,#171003); +#171001 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#171002 = DIRECTION('',(-1.,0.,0.)); +#171003 = DIRECTION('',(0.,0.,1.)); +#171004 = ADVANCED_FACE('',(#171005),#171021,.F.); +#171005 = FACE_BOUND('',#171006,.T.); +#171006 = EDGE_LOOP('',(#171007,#171013,#171014,#171020)); +#171007 = ORIENTED_EDGE('',*,*,#171008,.T.); +#171008 = EDGE_CURVE('',#170978,#170907,#171009,.T.); +#171009 = LINE('',#171010,#171011); +#171010 = CARTESIAN_POINT('',(0.8,0.,-0.1)); +#171011 = VECTOR('',#171012,1.); +#171012 = DIRECTION('',(-1.,-0.,-0.)); +#171013 = ORIENTED_EDGE('',*,*,#170932,.F.); +#171014 = ORIENTED_EDGE('',*,*,#171015,.F.); +#171015 = EDGE_CURVE('',#170986,#170925,#171016,.T.); +#171016 = LINE('',#171017,#171018); +#171017 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#171018 = VECTOR('',#171019,1.); +#171019 = DIRECTION('',(-1.,-0.,-0.)); +#171020 = ORIENTED_EDGE('',*,*,#170985,.T.); +#171021 = PLANE('',#171022); +#171022 = AXIS2_PLACEMENT_3D('',#171023,#171024,#171025); +#171023 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#171024 = DIRECTION('',(0.,0.,1.)); +#171025 = DIRECTION('',(1.,0.,-0.)); +#171026 = ADVANCED_FACE('',(#171027),#171033,.T.); +#171027 = FACE_BOUND('',#171028,.T.); +#171028 = EDGE_LOOP('',(#171029,#171030,#171031,#171032)); +#171029 = ORIENTED_EDGE('',*,*,#170962,.T.); +#171030 = ORIENTED_EDGE('',*,*,#170993,.T.); +#171031 = ORIENTED_EDGE('',*,*,#171015,.T.); +#171032 = ORIENTED_EDGE('',*,*,#170924,.T.); +#171033 = PLANE('',#171034); +#171034 = AXIS2_PLACEMENT_3D('',#171035,#171036,#171037); +#171035 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171036 = DIRECTION('',(0.,1.,0.)); +#171037 = DIRECTION('',(0.,-0.,1.)); +#171038 = ADVANCED_FACE('',(#171039),#171045,.F.); +#171039 = FACE_BOUND('',#171040,.T.); +#171040 = EDGE_LOOP('',(#171041,#171042,#171043,#171044)); +#171041 = ORIENTED_EDGE('',*,*,#170906,.F.); +#171042 = ORIENTED_EDGE('',*,*,#171008,.F.); +#171043 = ORIENTED_EDGE('',*,*,#170977,.F.); +#171044 = ORIENTED_EDGE('',*,*,#170946,.F.); +#171045 = PLANE('',#171046); +#171046 = AXIS2_PLACEMENT_3D('',#171047,#171048,#171049); +#171047 = CARTESIAN_POINT('',(0.,0.,0.)); +#171048 = DIRECTION('',(0.,1.,0.)); +#171049 = DIRECTION('',(0.,-0.,1.)); +#171050 = MANIFOLD_SOLID_BREP('',#171051); +#171051 = CLOSED_SHELL('',(#171052,#171092,#171123,#171154,#171176, + #171188)); +#171052 = ADVANCED_FACE('',(#171053),#171087,.F.); +#171053 = FACE_BOUND('',#171054,.T.); +#171054 = EDGE_LOOP('',(#171055,#171065,#171073,#171081)); +#171055 = ORIENTED_EDGE('',*,*,#171056,.T.); +#171056 = EDGE_CURVE('',#171057,#171059,#171061,.T.); +#171057 = VERTEX_POINT('',#171058); +#171058 = CARTESIAN_POINT('',(0.8,0.,0.3)); +#171059 = VERTEX_POINT('',#171060); +#171060 = CARTESIAN_POINT('',(0.8,0.,0.5)); +#171061 = LINE('',#171062,#171063); +#171062 = CARTESIAN_POINT('',(0.8,0.,0.3)); +#171063 = VECTOR('',#171064,1.); +#171064 = DIRECTION('',(0.,0.,1.)); +#171065 = ORIENTED_EDGE('',*,*,#171066,.F.); +#171066 = EDGE_CURVE('',#171067,#171059,#171069,.T.); +#171067 = VERTEX_POINT('',#171068); +#171068 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#171069 = LINE('',#171070,#171071); +#171070 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#171071 = VECTOR('',#171072,1.); +#171072 = DIRECTION('',(-0.,-1.,-0.)); +#171073 = ORIENTED_EDGE('',*,*,#171074,.F.); +#171074 = EDGE_CURVE('',#171075,#171067,#171077,.T.); +#171075 = VERTEX_POINT('',#171076); +#171076 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171077 = LINE('',#171078,#171079); +#171078 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171079 = VECTOR('',#171080,1.); +#171080 = DIRECTION('',(0.,0.,1.)); +#171081 = ORIENTED_EDGE('',*,*,#171082,.T.); +#171082 = EDGE_CURVE('',#171075,#171057,#171083,.T.); +#171083 = LINE('',#171084,#171085); +#171084 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171085 = VECTOR('',#171086,1.); +#171086 = DIRECTION('',(-0.,-1.,-0.)); +#171087 = PLANE('',#171088); +#171088 = AXIS2_PLACEMENT_3D('',#171089,#171090,#171091); +#171089 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171090 = DIRECTION('',(1.,0.,0.)); +#171091 = DIRECTION('',(0.,0.,-1.)); +#171092 = ADVANCED_FACE('',(#171093),#171118,.F.); +#171093 = FACE_BOUND('',#171094,.T.); +#171094 = EDGE_LOOP('',(#171095,#171103,#171111,#171117)); +#171095 = ORIENTED_EDGE('',*,*,#171096,.T.); +#171096 = EDGE_CURVE('',#171059,#171097,#171099,.T.); +#171097 = VERTEX_POINT('',#171098); +#171098 = CARTESIAN_POINT('',(1.1,0.,0.5)); +#171099 = LINE('',#171100,#171101); +#171100 = CARTESIAN_POINT('',(0.8,0.,0.5)); +#171101 = VECTOR('',#171102,1.); +#171102 = DIRECTION('',(1.,0.,0.)); +#171103 = ORIENTED_EDGE('',*,*,#171104,.F.); +#171104 = EDGE_CURVE('',#171105,#171097,#171107,.T.); +#171105 = VERTEX_POINT('',#171106); +#171106 = CARTESIAN_POINT('',(1.1,0.1,0.5)); +#171107 = LINE('',#171108,#171109); +#171108 = CARTESIAN_POINT('',(1.1,0.1,0.5)); +#171109 = VECTOR('',#171110,1.); +#171110 = DIRECTION('',(-0.,-1.,-0.)); +#171111 = ORIENTED_EDGE('',*,*,#171112,.F.); +#171112 = EDGE_CURVE('',#171067,#171105,#171113,.T.); +#171113 = LINE('',#171114,#171115); +#171114 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#171115 = VECTOR('',#171116,1.); +#171116 = DIRECTION('',(1.,0.,0.)); +#171117 = ORIENTED_EDGE('',*,*,#171066,.T.); +#171118 = PLANE('',#171119); +#171119 = AXIS2_PLACEMENT_3D('',#171120,#171121,#171122); +#171120 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#171121 = DIRECTION('',(0.,0.,-1.)); +#171122 = DIRECTION('',(-1.,0.,-0.)); +#171123 = ADVANCED_FACE('',(#171124),#171149,.F.); +#171124 = FACE_BOUND('',#171125,.T.); +#171125 = EDGE_LOOP('',(#171126,#171134,#171142,#171148)); +#171126 = ORIENTED_EDGE('',*,*,#171127,.T.); +#171127 = EDGE_CURVE('',#171097,#171128,#171130,.T.); +#171128 = VERTEX_POINT('',#171129); +#171129 = CARTESIAN_POINT('',(1.1,0.,0.3)); +#171130 = LINE('',#171131,#171132); +#171131 = CARTESIAN_POINT('',(1.1,0.,0.3)); +#171132 = VECTOR('',#171133,1.); +#171133 = DIRECTION('',(-0.,-0.,-1.)); +#171134 = ORIENTED_EDGE('',*,*,#171135,.F.); +#171135 = EDGE_CURVE('',#171136,#171128,#171138,.T.); +#171136 = VERTEX_POINT('',#171137); +#171137 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#171138 = LINE('',#171139,#171140); +#171139 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#171140 = VECTOR('',#171141,1.); +#171141 = DIRECTION('',(-0.,-1.,-0.)); +#171142 = ORIENTED_EDGE('',*,*,#171143,.F.); +#171143 = EDGE_CURVE('',#171105,#171136,#171144,.T.); +#171144 = LINE('',#171145,#171146); +#171145 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#171146 = VECTOR('',#171147,1.); +#171147 = DIRECTION('',(-0.,-0.,-1.)); +#171148 = ORIENTED_EDGE('',*,*,#171104,.T.); +#171149 = PLANE('',#171150); +#171150 = AXIS2_PLACEMENT_3D('',#171151,#171152,#171153); +#171151 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#171152 = DIRECTION('',(-1.,0.,0.)); +#171153 = DIRECTION('',(0.,0.,1.)); +#171154 = ADVANCED_FACE('',(#171155),#171171,.F.); +#171155 = FACE_BOUND('',#171156,.T.); +#171156 = EDGE_LOOP('',(#171157,#171163,#171164,#171170)); +#171157 = ORIENTED_EDGE('',*,*,#171158,.T.); +#171158 = EDGE_CURVE('',#171128,#171057,#171159,.T.); +#171159 = LINE('',#171160,#171161); +#171160 = CARTESIAN_POINT('',(0.8,0.,0.3)); +#171161 = VECTOR('',#171162,1.); +#171162 = DIRECTION('',(-1.,-0.,-0.)); +#171163 = ORIENTED_EDGE('',*,*,#171082,.F.); +#171164 = ORIENTED_EDGE('',*,*,#171165,.F.); +#171165 = EDGE_CURVE('',#171136,#171075,#171166,.T.); +#171166 = LINE('',#171167,#171168); +#171167 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171168 = VECTOR('',#171169,1.); +#171169 = DIRECTION('',(-1.,-0.,-0.)); +#171170 = ORIENTED_EDGE('',*,*,#171135,.T.); +#171171 = PLANE('',#171172); +#171172 = AXIS2_PLACEMENT_3D('',#171173,#171174,#171175); +#171173 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#171174 = DIRECTION('',(0.,0.,1.)); +#171175 = DIRECTION('',(1.,0.,-0.)); +#171176 = ADVANCED_FACE('',(#171177),#171183,.T.); +#171177 = FACE_BOUND('',#171178,.T.); +#171178 = EDGE_LOOP('',(#171179,#171180,#171181,#171182)); +#171179 = ORIENTED_EDGE('',*,*,#171112,.T.); +#171180 = ORIENTED_EDGE('',*,*,#171143,.T.); +#171181 = ORIENTED_EDGE('',*,*,#171165,.T.); +#171182 = ORIENTED_EDGE('',*,*,#171074,.T.); +#171183 = PLANE('',#171184); +#171184 = AXIS2_PLACEMENT_3D('',#171185,#171186,#171187); +#171185 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171186 = DIRECTION('',(0.,1.,0.)); +#171187 = DIRECTION('',(0.,-0.,1.)); +#171188 = ADVANCED_FACE('',(#171189),#171195,.F.); +#171189 = FACE_BOUND('',#171190,.T.); +#171190 = EDGE_LOOP('',(#171191,#171192,#171193,#171194)); +#171191 = ORIENTED_EDGE('',*,*,#171056,.F.); +#171192 = ORIENTED_EDGE('',*,*,#171158,.F.); +#171193 = ORIENTED_EDGE('',*,*,#171127,.F.); +#171194 = ORIENTED_EDGE('',*,*,#171096,.F.); +#171195 = PLANE('',#171196); +#171196 = AXIS2_PLACEMENT_3D('',#171197,#171198,#171199); +#171197 = CARTESIAN_POINT('',(0.,0.,0.)); +#171198 = DIRECTION('',(0.,1.,0.)); +#171199 = DIRECTION('',(0.,-0.,1.)); +#171200 = MANIFOLD_SOLID_BREP('',#171201); +#171201 = CLOSED_SHELL('',(#171202,#171242,#171273,#171304,#171326, + #171338)); +#171202 = ADVANCED_FACE('',(#171203),#171237,.F.); +#171203 = FACE_BOUND('',#171204,.T.); +#171204 = EDGE_LOOP('',(#171205,#171215,#171223,#171231)); +#171205 = ORIENTED_EDGE('',*,*,#171206,.T.); +#171206 = EDGE_CURVE('',#171207,#171209,#171211,.T.); +#171207 = VERTEX_POINT('',#171208); +#171208 = CARTESIAN_POINT('',(0.8,0.,0.7)); +#171209 = VERTEX_POINT('',#171210); +#171210 = CARTESIAN_POINT('',(0.8,0.,0.9)); +#171211 = LINE('',#171212,#171213); +#171212 = CARTESIAN_POINT('',(0.8,0.,0.7)); +#171213 = VECTOR('',#171214,1.); +#171214 = DIRECTION('',(0.,0.,1.)); +#171215 = ORIENTED_EDGE('',*,*,#171216,.F.); +#171216 = EDGE_CURVE('',#171217,#171209,#171219,.T.); +#171217 = VERTEX_POINT('',#171218); +#171218 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#171219 = LINE('',#171220,#171221); +#171220 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#171221 = VECTOR('',#171222,1.); +#171222 = DIRECTION('',(-0.,-1.,-0.)); +#171223 = ORIENTED_EDGE('',*,*,#171224,.F.); +#171224 = EDGE_CURVE('',#171225,#171217,#171227,.T.); +#171225 = VERTEX_POINT('',#171226); +#171226 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171227 = LINE('',#171228,#171229); +#171228 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171229 = VECTOR('',#171230,1.); +#171230 = DIRECTION('',(0.,0.,1.)); +#171231 = ORIENTED_EDGE('',*,*,#171232,.T.); +#171232 = EDGE_CURVE('',#171225,#171207,#171233,.T.); +#171233 = LINE('',#171234,#171235); +#171234 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171235 = VECTOR('',#171236,1.); +#171236 = DIRECTION('',(-0.,-1.,-0.)); +#171237 = PLANE('',#171238); +#171238 = AXIS2_PLACEMENT_3D('',#171239,#171240,#171241); +#171239 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171240 = DIRECTION('',(1.,0.,0.)); +#171241 = DIRECTION('',(0.,0.,-1.)); +#171242 = ADVANCED_FACE('',(#171243),#171268,.F.); +#171243 = FACE_BOUND('',#171244,.T.); +#171244 = EDGE_LOOP('',(#171245,#171253,#171261,#171267)); +#171245 = ORIENTED_EDGE('',*,*,#171246,.T.); +#171246 = EDGE_CURVE('',#171209,#171247,#171249,.T.); +#171247 = VERTEX_POINT('',#171248); +#171248 = CARTESIAN_POINT('',(1.1,0.,0.9)); +#171249 = LINE('',#171250,#171251); +#171250 = CARTESIAN_POINT('',(0.8,0.,0.9)); +#171251 = VECTOR('',#171252,1.); +#171252 = DIRECTION('',(1.,0.,0.)); +#171253 = ORIENTED_EDGE('',*,*,#171254,.F.); +#171254 = EDGE_CURVE('',#171255,#171247,#171257,.T.); +#171255 = VERTEX_POINT('',#171256); +#171256 = CARTESIAN_POINT('',(1.1,0.1,0.9)); +#171257 = LINE('',#171258,#171259); +#171258 = CARTESIAN_POINT('',(1.1,0.1,0.9)); +#171259 = VECTOR('',#171260,1.); +#171260 = DIRECTION('',(-0.,-1.,-0.)); +#171261 = ORIENTED_EDGE('',*,*,#171262,.F.); +#171262 = EDGE_CURVE('',#171217,#171255,#171263,.T.); +#171263 = LINE('',#171264,#171265); +#171264 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#171265 = VECTOR('',#171266,1.); +#171266 = DIRECTION('',(1.,0.,0.)); +#171267 = ORIENTED_EDGE('',*,*,#171216,.T.); +#171268 = PLANE('',#171269); +#171269 = AXIS2_PLACEMENT_3D('',#171270,#171271,#171272); +#171270 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#171271 = DIRECTION('',(0.,0.,-1.)); +#171272 = DIRECTION('',(-1.,0.,-0.)); +#171273 = ADVANCED_FACE('',(#171274),#171299,.F.); +#171274 = FACE_BOUND('',#171275,.T.); +#171275 = EDGE_LOOP('',(#171276,#171284,#171292,#171298)); +#171276 = ORIENTED_EDGE('',*,*,#171277,.T.); +#171277 = EDGE_CURVE('',#171247,#171278,#171280,.T.); +#171278 = VERTEX_POINT('',#171279); +#171279 = CARTESIAN_POINT('',(1.1,0.,0.7)); +#171280 = LINE('',#171281,#171282); +#171281 = CARTESIAN_POINT('',(1.1,0.,0.7)); +#171282 = VECTOR('',#171283,1.); +#171283 = DIRECTION('',(-0.,-0.,-1.)); +#171284 = ORIENTED_EDGE('',*,*,#171285,.F.); +#171285 = EDGE_CURVE('',#171286,#171278,#171288,.T.); +#171286 = VERTEX_POINT('',#171287); +#171287 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#171288 = LINE('',#171289,#171290); +#171289 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#171290 = VECTOR('',#171291,1.); +#171291 = DIRECTION('',(-0.,-1.,-0.)); +#171292 = ORIENTED_EDGE('',*,*,#171293,.F.); +#171293 = EDGE_CURVE('',#171255,#171286,#171294,.T.); +#171294 = LINE('',#171295,#171296); +#171295 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#171296 = VECTOR('',#171297,1.); +#171297 = DIRECTION('',(-0.,-0.,-1.)); +#171298 = ORIENTED_EDGE('',*,*,#171254,.T.); +#171299 = PLANE('',#171300); +#171300 = AXIS2_PLACEMENT_3D('',#171301,#171302,#171303); +#171301 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#171302 = DIRECTION('',(-1.,0.,0.)); +#171303 = DIRECTION('',(0.,0.,1.)); +#171304 = ADVANCED_FACE('',(#171305),#171321,.F.); +#171305 = FACE_BOUND('',#171306,.T.); +#171306 = EDGE_LOOP('',(#171307,#171313,#171314,#171320)); +#171307 = ORIENTED_EDGE('',*,*,#171308,.T.); +#171308 = EDGE_CURVE('',#171278,#171207,#171309,.T.); +#171309 = LINE('',#171310,#171311); +#171310 = CARTESIAN_POINT('',(0.8,0.,0.7)); +#171311 = VECTOR('',#171312,1.); +#171312 = DIRECTION('',(-1.,-0.,-0.)); +#171313 = ORIENTED_EDGE('',*,*,#171232,.F.); +#171314 = ORIENTED_EDGE('',*,*,#171315,.F.); +#171315 = EDGE_CURVE('',#171286,#171225,#171316,.T.); +#171316 = LINE('',#171317,#171318); +#171317 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171318 = VECTOR('',#171319,1.); +#171319 = DIRECTION('',(-1.,-0.,-0.)); +#171320 = ORIENTED_EDGE('',*,*,#171285,.T.); +#171321 = PLANE('',#171322); +#171322 = AXIS2_PLACEMENT_3D('',#171323,#171324,#171325); +#171323 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#171324 = DIRECTION('',(0.,0.,1.)); +#171325 = DIRECTION('',(1.,0.,-0.)); +#171326 = ADVANCED_FACE('',(#171327),#171333,.T.); +#171327 = FACE_BOUND('',#171328,.T.); +#171328 = EDGE_LOOP('',(#171329,#171330,#171331,#171332)); +#171329 = ORIENTED_EDGE('',*,*,#171262,.T.); +#171330 = ORIENTED_EDGE('',*,*,#171293,.T.); +#171331 = ORIENTED_EDGE('',*,*,#171315,.T.); +#171332 = ORIENTED_EDGE('',*,*,#171224,.T.); +#171333 = PLANE('',#171334); +#171334 = AXIS2_PLACEMENT_3D('',#171335,#171336,#171337); +#171335 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171336 = DIRECTION('',(0.,1.,0.)); +#171337 = DIRECTION('',(0.,-0.,1.)); +#171338 = ADVANCED_FACE('',(#171339),#171345,.F.); +#171339 = FACE_BOUND('',#171340,.T.); +#171340 = EDGE_LOOP('',(#171341,#171342,#171343,#171344)); +#171341 = ORIENTED_EDGE('',*,*,#171206,.F.); +#171342 = ORIENTED_EDGE('',*,*,#171308,.F.); +#171343 = ORIENTED_EDGE('',*,*,#171277,.F.); +#171344 = ORIENTED_EDGE('',*,*,#171246,.F.); +#171345 = PLANE('',#171346); +#171346 = AXIS2_PLACEMENT_3D('',#171347,#171348,#171349); +#171347 = CARTESIAN_POINT('',(0.,0.,0.)); +#171348 = DIRECTION('',(0.,1.,0.)); +#171349 = DIRECTION('',(0.,-0.,1.)); +#171350 = MANIFOLD_SOLID_BREP('',#171351); +#171351 = CLOSED_SHELL('',(#171352,#171392,#171423,#171454,#171476, + #171488)); +#171352 = ADVANCED_FACE('',(#171353),#171387,.F.); +#171353 = FACE_BOUND('',#171354,.T.); +#171354 = EDGE_LOOP('',(#171355,#171365,#171373,#171381)); +#171355 = ORIENTED_EDGE('',*,*,#171356,.T.); +#171356 = EDGE_CURVE('',#171357,#171359,#171361,.T.); +#171357 = VERTEX_POINT('',#171358); +#171358 = CARTESIAN_POINT('',(-1.1,0.,-0.5)); +#171359 = VERTEX_POINT('',#171360); +#171360 = CARTESIAN_POINT('',(-1.1,0.,-0.3)); +#171361 = LINE('',#171362,#171363); +#171362 = CARTESIAN_POINT('',(-1.1,0.,-0.5)); +#171363 = VECTOR('',#171364,1.); +#171364 = DIRECTION('',(0.,0.,1.)); +#171365 = ORIENTED_EDGE('',*,*,#171366,.F.); +#171366 = EDGE_CURVE('',#171367,#171359,#171369,.T.); +#171367 = VERTEX_POINT('',#171368); +#171368 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#171369 = LINE('',#171370,#171371); +#171370 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#171371 = VECTOR('',#171372,1.); +#171372 = DIRECTION('',(-0.,-1.,-0.)); +#171373 = ORIENTED_EDGE('',*,*,#171374,.F.); +#171374 = EDGE_CURVE('',#171375,#171367,#171377,.T.); +#171375 = VERTEX_POINT('',#171376); +#171376 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171377 = LINE('',#171378,#171379); +#171378 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171379 = VECTOR('',#171380,1.); +#171380 = DIRECTION('',(0.,0.,1.)); +#171381 = ORIENTED_EDGE('',*,*,#171382,.T.); +#171382 = EDGE_CURVE('',#171375,#171357,#171383,.T.); +#171383 = LINE('',#171384,#171385); +#171384 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171385 = VECTOR('',#171386,1.); +#171386 = DIRECTION('',(-0.,-1.,-0.)); +#171387 = PLANE('',#171388); +#171388 = AXIS2_PLACEMENT_3D('',#171389,#171390,#171391); +#171389 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171390 = DIRECTION('',(1.,0.,0.)); +#171391 = DIRECTION('',(0.,0.,-1.)); +#171392 = ADVANCED_FACE('',(#171393),#171418,.F.); +#171393 = FACE_BOUND('',#171394,.T.); +#171394 = EDGE_LOOP('',(#171395,#171403,#171411,#171417)); +#171395 = ORIENTED_EDGE('',*,*,#171396,.T.); +#171396 = EDGE_CURVE('',#171359,#171397,#171399,.T.); +#171397 = VERTEX_POINT('',#171398); +#171398 = CARTESIAN_POINT('',(-0.8,0.,-0.3)); +#171399 = LINE('',#171400,#171401); +#171400 = CARTESIAN_POINT('',(-1.1,0.,-0.3)); +#171401 = VECTOR('',#171402,1.); +#171402 = DIRECTION('',(1.,0.,0.)); +#171403 = ORIENTED_EDGE('',*,*,#171404,.F.); +#171404 = EDGE_CURVE('',#171405,#171397,#171407,.T.); +#171405 = VERTEX_POINT('',#171406); +#171406 = CARTESIAN_POINT('',(-0.8,0.1,-0.3)); +#171407 = LINE('',#171408,#171409); +#171408 = CARTESIAN_POINT('',(-0.8,0.1,-0.3)); +#171409 = VECTOR('',#171410,1.); +#171410 = DIRECTION('',(-0.,-1.,-0.)); +#171411 = ORIENTED_EDGE('',*,*,#171412,.F.); +#171412 = EDGE_CURVE('',#171367,#171405,#171413,.T.); +#171413 = LINE('',#171414,#171415); +#171414 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#171415 = VECTOR('',#171416,1.); +#171416 = DIRECTION('',(1.,0.,0.)); +#171417 = ORIENTED_EDGE('',*,*,#171366,.T.); +#171418 = PLANE('',#171419); +#171419 = AXIS2_PLACEMENT_3D('',#171420,#171421,#171422); +#171420 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#171421 = DIRECTION('',(0.,0.,-1.)); +#171422 = DIRECTION('',(-1.,0.,-0.)); +#171423 = ADVANCED_FACE('',(#171424),#171449,.F.); +#171424 = FACE_BOUND('',#171425,.T.); +#171425 = EDGE_LOOP('',(#171426,#171434,#171442,#171448)); +#171426 = ORIENTED_EDGE('',*,*,#171427,.T.); +#171427 = EDGE_CURVE('',#171397,#171428,#171430,.T.); +#171428 = VERTEX_POINT('',#171429); +#171429 = CARTESIAN_POINT('',(-0.8,0.,-0.5)); +#171430 = LINE('',#171431,#171432); +#171431 = CARTESIAN_POINT('',(-0.8,0.,-0.5)); +#171432 = VECTOR('',#171433,1.); +#171433 = DIRECTION('',(-0.,-0.,-1.)); +#171434 = ORIENTED_EDGE('',*,*,#171435,.F.); +#171435 = EDGE_CURVE('',#171436,#171428,#171438,.T.); +#171436 = VERTEX_POINT('',#171437); +#171437 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#171438 = LINE('',#171439,#171440); +#171439 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#171440 = VECTOR('',#171441,1.); +#171441 = DIRECTION('',(-0.,-1.,-0.)); +#171442 = ORIENTED_EDGE('',*,*,#171443,.F.); +#171443 = EDGE_CURVE('',#171405,#171436,#171444,.T.); +#171444 = LINE('',#171445,#171446); +#171445 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#171446 = VECTOR('',#171447,1.); +#171447 = DIRECTION('',(-0.,-0.,-1.)); +#171448 = ORIENTED_EDGE('',*,*,#171404,.T.); +#171449 = PLANE('',#171450); +#171450 = AXIS2_PLACEMENT_3D('',#171451,#171452,#171453); +#171451 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#171452 = DIRECTION('',(-1.,0.,0.)); +#171453 = DIRECTION('',(0.,0.,1.)); +#171454 = ADVANCED_FACE('',(#171455),#171471,.F.); +#171455 = FACE_BOUND('',#171456,.T.); +#171456 = EDGE_LOOP('',(#171457,#171463,#171464,#171470)); +#171457 = ORIENTED_EDGE('',*,*,#171458,.T.); +#171458 = EDGE_CURVE('',#171428,#171357,#171459,.T.); +#171459 = LINE('',#171460,#171461); +#171460 = CARTESIAN_POINT('',(-1.1,0.,-0.5)); +#171461 = VECTOR('',#171462,1.); +#171462 = DIRECTION('',(-1.,-0.,-0.)); +#171463 = ORIENTED_EDGE('',*,*,#171382,.F.); +#171464 = ORIENTED_EDGE('',*,*,#171465,.F.); +#171465 = EDGE_CURVE('',#171436,#171375,#171466,.T.); +#171466 = LINE('',#171467,#171468); +#171467 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171468 = VECTOR('',#171469,1.); +#171469 = DIRECTION('',(-1.,-0.,-0.)); +#171470 = ORIENTED_EDGE('',*,*,#171435,.T.); +#171471 = PLANE('',#171472); +#171472 = AXIS2_PLACEMENT_3D('',#171473,#171474,#171475); +#171473 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#171474 = DIRECTION('',(0.,0.,1.)); +#171475 = DIRECTION('',(1.,0.,-0.)); +#171476 = ADVANCED_FACE('',(#171477),#171483,.T.); +#171477 = FACE_BOUND('',#171478,.T.); +#171478 = EDGE_LOOP('',(#171479,#171480,#171481,#171482)); +#171479 = ORIENTED_EDGE('',*,*,#171412,.T.); +#171480 = ORIENTED_EDGE('',*,*,#171443,.T.); +#171481 = ORIENTED_EDGE('',*,*,#171465,.T.); +#171482 = ORIENTED_EDGE('',*,*,#171374,.T.); +#171483 = PLANE('',#171484); +#171484 = AXIS2_PLACEMENT_3D('',#171485,#171486,#171487); +#171485 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171486 = DIRECTION('',(0.,1.,0.)); +#171487 = DIRECTION('',(0.,-0.,1.)); +#171488 = ADVANCED_FACE('',(#171489),#171495,.F.); +#171489 = FACE_BOUND('',#171490,.T.); +#171490 = EDGE_LOOP('',(#171491,#171492,#171493,#171494)); +#171491 = ORIENTED_EDGE('',*,*,#171356,.F.); +#171492 = ORIENTED_EDGE('',*,*,#171458,.F.); +#171493 = ORIENTED_EDGE('',*,*,#171427,.F.); +#171494 = ORIENTED_EDGE('',*,*,#171396,.F.); +#171495 = PLANE('',#171496); +#171496 = AXIS2_PLACEMENT_3D('',#171497,#171498,#171499); +#171497 = CARTESIAN_POINT('',(0.,0.,0.)); +#171498 = DIRECTION('',(0.,1.,0.)); +#171499 = DIRECTION('',(0.,-0.,1.)); +#171500 = MANIFOLD_SOLID_BREP('',#171501); +#171501 = CLOSED_SHELL('',(#171502,#171542,#171573,#171604,#171626, + #171638)); +#171502 = ADVANCED_FACE('',(#171503),#171537,.F.); +#171503 = FACE_BOUND('',#171504,.T.); +#171504 = EDGE_LOOP('',(#171505,#171515,#171523,#171531)); +#171505 = ORIENTED_EDGE('',*,*,#171506,.T.); +#171506 = EDGE_CURVE('',#171507,#171509,#171511,.T.); +#171507 = VERTEX_POINT('',#171508); +#171508 = CARTESIAN_POINT('',(-1.1,0.,-0.1)); +#171509 = VERTEX_POINT('',#171510); +#171510 = CARTESIAN_POINT('',(-1.1,0.,0.1)); +#171511 = LINE('',#171512,#171513); +#171512 = CARTESIAN_POINT('',(-1.1,0.,-0.1)); +#171513 = VECTOR('',#171514,1.); +#171514 = DIRECTION('',(0.,0.,1.)); +#171515 = ORIENTED_EDGE('',*,*,#171516,.F.); +#171516 = EDGE_CURVE('',#171517,#171509,#171519,.T.); +#171517 = VERTEX_POINT('',#171518); +#171518 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#171519 = LINE('',#171520,#171521); +#171520 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#171521 = VECTOR('',#171522,1.); +#171522 = DIRECTION('',(-0.,-1.,-0.)); +#171523 = ORIENTED_EDGE('',*,*,#171524,.F.); +#171524 = EDGE_CURVE('',#171525,#171517,#171527,.T.); +#171525 = VERTEX_POINT('',#171526); +#171526 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171527 = LINE('',#171528,#171529); +#171528 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171529 = VECTOR('',#171530,1.); +#171530 = DIRECTION('',(0.,0.,1.)); +#171531 = ORIENTED_EDGE('',*,*,#171532,.T.); +#171532 = EDGE_CURVE('',#171525,#171507,#171533,.T.); +#171533 = LINE('',#171534,#171535); +#171534 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171535 = VECTOR('',#171536,1.); +#171536 = DIRECTION('',(-0.,-1.,-0.)); +#171537 = PLANE('',#171538); +#171538 = AXIS2_PLACEMENT_3D('',#171539,#171540,#171541); +#171539 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171540 = DIRECTION('',(1.,0.,0.)); +#171541 = DIRECTION('',(0.,0.,-1.)); +#171542 = ADVANCED_FACE('',(#171543),#171568,.F.); +#171543 = FACE_BOUND('',#171544,.T.); +#171544 = EDGE_LOOP('',(#171545,#171553,#171561,#171567)); +#171545 = ORIENTED_EDGE('',*,*,#171546,.T.); +#171546 = EDGE_CURVE('',#171509,#171547,#171549,.T.); +#171547 = VERTEX_POINT('',#171548); +#171548 = CARTESIAN_POINT('',(-0.8,0.,0.1)); +#171549 = LINE('',#171550,#171551); +#171550 = CARTESIAN_POINT('',(-1.1,0.,0.1)); +#171551 = VECTOR('',#171552,1.); +#171552 = DIRECTION('',(1.,0.,0.)); +#171553 = ORIENTED_EDGE('',*,*,#171554,.F.); +#171554 = EDGE_CURVE('',#171555,#171547,#171557,.T.); +#171555 = VERTEX_POINT('',#171556); +#171556 = CARTESIAN_POINT('',(-0.8,0.1,0.1)); +#171557 = LINE('',#171558,#171559); +#171558 = CARTESIAN_POINT('',(-0.8,0.1,0.1)); +#171559 = VECTOR('',#171560,1.); +#171560 = DIRECTION('',(-0.,-1.,-0.)); +#171561 = ORIENTED_EDGE('',*,*,#171562,.F.); +#171562 = EDGE_CURVE('',#171517,#171555,#171563,.T.); +#171563 = LINE('',#171564,#171565); +#171564 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#171565 = VECTOR('',#171566,1.); +#171566 = DIRECTION('',(1.,0.,0.)); +#171567 = ORIENTED_EDGE('',*,*,#171516,.T.); +#171568 = PLANE('',#171569); +#171569 = AXIS2_PLACEMENT_3D('',#171570,#171571,#171572); +#171570 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#171571 = DIRECTION('',(0.,0.,-1.)); +#171572 = DIRECTION('',(-1.,0.,-0.)); +#171573 = ADVANCED_FACE('',(#171574),#171599,.F.); +#171574 = FACE_BOUND('',#171575,.T.); +#171575 = EDGE_LOOP('',(#171576,#171584,#171592,#171598)); +#171576 = ORIENTED_EDGE('',*,*,#171577,.T.); +#171577 = EDGE_CURVE('',#171547,#171578,#171580,.T.); +#171578 = VERTEX_POINT('',#171579); +#171579 = CARTESIAN_POINT('',(-0.8,0.,-0.1)); +#171580 = LINE('',#171581,#171582); +#171581 = CARTESIAN_POINT('',(-0.8,0.,-0.1)); +#171582 = VECTOR('',#171583,1.); +#171583 = DIRECTION('',(-0.,-0.,-1.)); +#171584 = ORIENTED_EDGE('',*,*,#171585,.F.); +#171585 = EDGE_CURVE('',#171586,#171578,#171588,.T.); +#171586 = VERTEX_POINT('',#171587); +#171587 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#171588 = LINE('',#171589,#171590); +#171589 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#171590 = VECTOR('',#171591,1.); +#171591 = DIRECTION('',(-0.,-1.,-0.)); +#171592 = ORIENTED_EDGE('',*,*,#171593,.F.); +#171593 = EDGE_CURVE('',#171555,#171586,#171594,.T.); +#171594 = LINE('',#171595,#171596); +#171595 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#171596 = VECTOR('',#171597,1.); +#171597 = DIRECTION('',(-0.,-0.,-1.)); +#171598 = ORIENTED_EDGE('',*,*,#171554,.T.); +#171599 = PLANE('',#171600); +#171600 = AXIS2_PLACEMENT_3D('',#171601,#171602,#171603); +#171601 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#171602 = DIRECTION('',(-1.,0.,0.)); +#171603 = DIRECTION('',(0.,0.,1.)); +#171604 = ADVANCED_FACE('',(#171605),#171621,.F.); +#171605 = FACE_BOUND('',#171606,.T.); +#171606 = EDGE_LOOP('',(#171607,#171613,#171614,#171620)); +#171607 = ORIENTED_EDGE('',*,*,#171608,.T.); +#171608 = EDGE_CURVE('',#171578,#171507,#171609,.T.); +#171609 = LINE('',#171610,#171611); +#171610 = CARTESIAN_POINT('',(-1.1,0.,-0.1)); +#171611 = VECTOR('',#171612,1.); +#171612 = DIRECTION('',(-1.,-0.,-0.)); +#171613 = ORIENTED_EDGE('',*,*,#171532,.F.); +#171614 = ORIENTED_EDGE('',*,*,#171615,.F.); +#171615 = EDGE_CURVE('',#171586,#171525,#171616,.T.); +#171616 = LINE('',#171617,#171618); +#171617 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171618 = VECTOR('',#171619,1.); +#171619 = DIRECTION('',(-1.,-0.,-0.)); +#171620 = ORIENTED_EDGE('',*,*,#171585,.T.); +#171621 = PLANE('',#171622); +#171622 = AXIS2_PLACEMENT_3D('',#171623,#171624,#171625); +#171623 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#171624 = DIRECTION('',(0.,0.,1.)); +#171625 = DIRECTION('',(1.,0.,-0.)); +#171626 = ADVANCED_FACE('',(#171627),#171633,.T.); +#171627 = FACE_BOUND('',#171628,.T.); +#171628 = EDGE_LOOP('',(#171629,#171630,#171631,#171632)); +#171629 = ORIENTED_EDGE('',*,*,#171562,.T.); +#171630 = ORIENTED_EDGE('',*,*,#171593,.T.); +#171631 = ORIENTED_EDGE('',*,*,#171615,.T.); +#171632 = ORIENTED_EDGE('',*,*,#171524,.T.); +#171633 = PLANE('',#171634); +#171634 = AXIS2_PLACEMENT_3D('',#171635,#171636,#171637); +#171635 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171636 = DIRECTION('',(0.,1.,0.)); +#171637 = DIRECTION('',(0.,-0.,1.)); +#171638 = ADVANCED_FACE('',(#171639),#171645,.F.); +#171639 = FACE_BOUND('',#171640,.T.); +#171640 = EDGE_LOOP('',(#171641,#171642,#171643,#171644)); +#171641 = ORIENTED_EDGE('',*,*,#171506,.F.); +#171642 = ORIENTED_EDGE('',*,*,#171608,.F.); +#171643 = ORIENTED_EDGE('',*,*,#171577,.F.); +#171644 = ORIENTED_EDGE('',*,*,#171546,.F.); +#171645 = PLANE('',#171646); +#171646 = AXIS2_PLACEMENT_3D('',#171647,#171648,#171649); +#171647 = CARTESIAN_POINT('',(0.,0.,0.)); +#171648 = DIRECTION('',(0.,1.,0.)); +#171649 = DIRECTION('',(0.,-0.,1.)); +#171650 = MANIFOLD_SOLID_BREP('',#171651); +#171651 = CLOSED_SHELL('',(#171652,#171692,#171723,#171754,#171776, + #171788)); +#171652 = ADVANCED_FACE('',(#171653),#171687,.F.); +#171653 = FACE_BOUND('',#171654,.T.); +#171654 = EDGE_LOOP('',(#171655,#171665,#171673,#171681)); +#171655 = ORIENTED_EDGE('',*,*,#171656,.T.); +#171656 = EDGE_CURVE('',#171657,#171659,#171661,.T.); +#171657 = VERTEX_POINT('',#171658); +#171658 = CARTESIAN_POINT('',(-1.1,0.,0.3)); +#171659 = VERTEX_POINT('',#171660); +#171660 = CARTESIAN_POINT('',(-1.1,0.,0.5)); +#171661 = LINE('',#171662,#171663); +#171662 = CARTESIAN_POINT('',(-1.1,0.,0.3)); +#171663 = VECTOR('',#171664,1.); +#171664 = DIRECTION('',(0.,0.,1.)); +#171665 = ORIENTED_EDGE('',*,*,#171666,.F.); +#171666 = EDGE_CURVE('',#171667,#171659,#171669,.T.); +#171667 = VERTEX_POINT('',#171668); +#171668 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171669 = LINE('',#171670,#171671); +#171670 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171671 = VECTOR('',#171672,1.); +#171672 = DIRECTION('',(-0.,-1.,-0.)); +#171673 = ORIENTED_EDGE('',*,*,#171674,.F.); +#171674 = EDGE_CURVE('',#171675,#171667,#171677,.T.); +#171675 = VERTEX_POINT('',#171676); +#171676 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171677 = LINE('',#171678,#171679); +#171678 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171679 = VECTOR('',#171680,1.); +#171680 = DIRECTION('',(0.,0.,1.)); +#171681 = ORIENTED_EDGE('',*,*,#171682,.T.); +#171682 = EDGE_CURVE('',#171675,#171657,#171683,.T.); +#171683 = LINE('',#171684,#171685); +#171684 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171685 = VECTOR('',#171686,1.); +#171686 = DIRECTION('',(-0.,-1.,-0.)); +#171687 = PLANE('',#171688); +#171688 = AXIS2_PLACEMENT_3D('',#171689,#171690,#171691); +#171689 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171690 = DIRECTION('',(1.,0.,0.)); +#171691 = DIRECTION('',(0.,0.,-1.)); +#171692 = ADVANCED_FACE('',(#171693),#171718,.F.); +#171693 = FACE_BOUND('',#171694,.T.); +#171694 = EDGE_LOOP('',(#171695,#171703,#171711,#171717)); +#171695 = ORIENTED_EDGE('',*,*,#171696,.T.); +#171696 = EDGE_CURVE('',#171659,#171697,#171699,.T.); +#171697 = VERTEX_POINT('',#171698); +#171698 = CARTESIAN_POINT('',(-0.8,0.,0.5)); +#171699 = LINE('',#171700,#171701); +#171700 = CARTESIAN_POINT('',(-1.1,0.,0.5)); +#171701 = VECTOR('',#171702,1.); +#171702 = DIRECTION('',(1.,0.,0.)); +#171703 = ORIENTED_EDGE('',*,*,#171704,.F.); +#171704 = EDGE_CURVE('',#171705,#171697,#171707,.T.); +#171705 = VERTEX_POINT('',#171706); +#171706 = CARTESIAN_POINT('',(-0.8,0.1,0.5)); +#171707 = LINE('',#171708,#171709); +#171708 = CARTESIAN_POINT('',(-0.8,0.1,0.5)); +#171709 = VECTOR('',#171710,1.); +#171710 = DIRECTION('',(-0.,-1.,-0.)); +#171711 = ORIENTED_EDGE('',*,*,#171712,.F.); +#171712 = EDGE_CURVE('',#171667,#171705,#171713,.T.); +#171713 = LINE('',#171714,#171715); +#171714 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171715 = VECTOR('',#171716,1.); +#171716 = DIRECTION('',(1.,0.,0.)); +#171717 = ORIENTED_EDGE('',*,*,#171666,.T.); +#171718 = PLANE('',#171719); +#171719 = AXIS2_PLACEMENT_3D('',#171720,#171721,#171722); +#171720 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171721 = DIRECTION('',(0.,0.,-1.)); +#171722 = DIRECTION('',(-1.,0.,-0.)); +#171723 = ADVANCED_FACE('',(#171724),#171749,.F.); +#171724 = FACE_BOUND('',#171725,.T.); +#171725 = EDGE_LOOP('',(#171726,#171734,#171742,#171748)); +#171726 = ORIENTED_EDGE('',*,*,#171727,.T.); +#171727 = EDGE_CURVE('',#171697,#171728,#171730,.T.); +#171728 = VERTEX_POINT('',#171729); +#171729 = CARTESIAN_POINT('',(-0.8,0.,0.3)); +#171730 = LINE('',#171731,#171732); +#171731 = CARTESIAN_POINT('',(-0.8,0.,0.3)); +#171732 = VECTOR('',#171733,1.); +#171733 = DIRECTION('',(-0.,-0.,-1.)); +#171734 = ORIENTED_EDGE('',*,*,#171735,.F.); +#171735 = EDGE_CURVE('',#171736,#171728,#171738,.T.); +#171736 = VERTEX_POINT('',#171737); +#171737 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#171738 = LINE('',#171739,#171740); +#171739 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#171740 = VECTOR('',#171741,1.); +#171741 = DIRECTION('',(-0.,-1.,-0.)); +#171742 = ORIENTED_EDGE('',*,*,#171743,.F.); +#171743 = EDGE_CURVE('',#171705,#171736,#171744,.T.); +#171744 = LINE('',#171745,#171746); +#171745 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#171746 = VECTOR('',#171747,1.); +#171747 = DIRECTION('',(-0.,-0.,-1.)); +#171748 = ORIENTED_EDGE('',*,*,#171704,.T.); +#171749 = PLANE('',#171750); +#171750 = AXIS2_PLACEMENT_3D('',#171751,#171752,#171753); +#171751 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#171752 = DIRECTION('',(-1.,0.,0.)); +#171753 = DIRECTION('',(0.,0.,1.)); +#171754 = ADVANCED_FACE('',(#171755),#171771,.F.); +#171755 = FACE_BOUND('',#171756,.T.); +#171756 = EDGE_LOOP('',(#171757,#171763,#171764,#171770)); +#171757 = ORIENTED_EDGE('',*,*,#171758,.T.); +#171758 = EDGE_CURVE('',#171728,#171657,#171759,.T.); +#171759 = LINE('',#171760,#171761); +#171760 = CARTESIAN_POINT('',(-1.1,0.,0.3)); +#171761 = VECTOR('',#171762,1.); +#171762 = DIRECTION('',(-1.,-0.,-0.)); +#171763 = ORIENTED_EDGE('',*,*,#171682,.F.); +#171764 = ORIENTED_EDGE('',*,*,#171765,.F.); +#171765 = EDGE_CURVE('',#171736,#171675,#171766,.T.); +#171766 = LINE('',#171767,#171768); +#171767 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171768 = VECTOR('',#171769,1.); +#171769 = DIRECTION('',(-1.,-0.,-0.)); +#171770 = ORIENTED_EDGE('',*,*,#171735,.T.); +#171771 = PLANE('',#171772); +#171772 = AXIS2_PLACEMENT_3D('',#171773,#171774,#171775); +#171773 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171774 = DIRECTION('',(0.,0.,1.)); +#171775 = DIRECTION('',(1.,0.,-0.)); +#171776 = ADVANCED_FACE('',(#171777),#171783,.T.); +#171777 = FACE_BOUND('',#171778,.T.); +#171778 = EDGE_LOOP('',(#171779,#171780,#171781,#171782)); +#171779 = ORIENTED_EDGE('',*,*,#171712,.T.); +#171780 = ORIENTED_EDGE('',*,*,#171743,.T.); +#171781 = ORIENTED_EDGE('',*,*,#171765,.T.); +#171782 = ORIENTED_EDGE('',*,*,#171674,.T.); +#171783 = PLANE('',#171784); +#171784 = AXIS2_PLACEMENT_3D('',#171785,#171786,#171787); +#171785 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171786 = DIRECTION('',(0.,1.,0.)); +#171787 = DIRECTION('',(0.,-0.,1.)); +#171788 = ADVANCED_FACE('',(#171789),#171795,.F.); +#171789 = FACE_BOUND('',#171790,.T.); +#171790 = EDGE_LOOP('',(#171791,#171792,#171793,#171794)); +#171791 = ORIENTED_EDGE('',*,*,#171656,.F.); +#171792 = ORIENTED_EDGE('',*,*,#171758,.F.); +#171793 = ORIENTED_EDGE('',*,*,#171727,.F.); +#171794 = ORIENTED_EDGE('',*,*,#171696,.F.); +#171795 = PLANE('',#171796); +#171796 = AXIS2_PLACEMENT_3D('',#171797,#171798,#171799); +#171797 = CARTESIAN_POINT('',(0.,0.,0.)); +#171798 = DIRECTION('',(0.,1.,0.)); +#171799 = DIRECTION('',(0.,-0.,1.)); +#171800 = MANIFOLD_SOLID_BREP('',#171801); +#171801 = CLOSED_SHELL('',(#171802,#171844,#171892,#171932,#171972, + #172012,#172052,#172092,#172132,#172172,#172212,#172252,#172292, + #172447,#172602,#172896,#173049,#173202,#173224,#173242,#173252, + #173283,#173306,#173331,#173355,#173379,#173412,#173436,#173462, + #173479,#173512,#173536,#173562,#173579,#173612,#173636,#173662, + #173679,#173710,#173736,#173762,#173779,#173810,#173836,#173862, + #173879,#173910,#173936,#173962,#173979,#174010,#174036,#174062, + #174079,#174110,#174136,#174162,#174179,#174212,#174236,#174262, + #174279,#174312,#174336,#174362,#174379,#174401,#174423,#174445, + #174467,#174489,#174521,#174538,#174565,#174577,#174599,#174621, + #174643,#174665,#174687,#174709,#174736,#174753,#174775,#174806, + #174828,#174840,#174854,#174885,#174902,#174919)); +#171802 = ADVANCED_FACE('',(#171803),#171839,.F.); +#171803 = FACE_BOUND('',#171804,.F.); +#171804 = EDGE_LOOP('',(#171805,#171815,#171824,#171832)); +#171805 = ORIENTED_EDGE('',*,*,#171806,.T.); +#171806 = EDGE_CURVE('',#171807,#171809,#171811,.T.); +#171807 = VERTEX_POINT('',#171808); +#171808 = CARTESIAN_POINT('',(-0.85,0.75,-0.65)); +#171809 = VERTEX_POINT('',#171810); +#171810 = CARTESIAN_POINT('',(-0.85,0.8,-0.65)); +#171811 = LINE('',#171812,#171813); +#171812 = CARTESIAN_POINT('',(-0.85,0.75,-0.65)); +#171813 = VECTOR('',#171814,1.); +#171814 = DIRECTION('',(-0.,1.,-0.)); +#171815 = ORIENTED_EDGE('',*,*,#171816,.F.); +#171816 = EDGE_CURVE('',#171817,#171809,#171819,.T.); +#171817 = VERTEX_POINT('',#171818); +#171818 = CARTESIAN_POINT('',(-0.85,0.8,-0.85)); +#171819 = CIRCLE('',#171820,0.1); +#171820 = AXIS2_PLACEMENT_3D('',#171821,#171822,#171823); +#171821 = CARTESIAN_POINT('',(-0.85,0.8,-0.75)); +#171822 = DIRECTION('',(0.,1.,0.)); +#171823 = DIRECTION('',(0.,-0.,1.)); +#171824 = ORIENTED_EDGE('',*,*,#171825,.F.); +#171825 = EDGE_CURVE('',#171826,#171817,#171828,.T.); +#171826 = VERTEX_POINT('',#171827); +#171827 = CARTESIAN_POINT('',(-0.85,0.75,-0.85)); +#171828 = LINE('',#171829,#171830); +#171829 = CARTESIAN_POINT('',(-0.85,0.75,-0.85)); +#171830 = VECTOR('',#171831,1.); +#171831 = DIRECTION('',(-0.,1.,-0.)); +#171832 = ORIENTED_EDGE('',*,*,#171833,.T.); +#171833 = EDGE_CURVE('',#171826,#171807,#171834,.T.); +#171834 = CIRCLE('',#171835,0.1); +#171835 = AXIS2_PLACEMENT_3D('',#171836,#171837,#171838); +#171836 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#171837 = DIRECTION('',(0.,1.,0.)); +#171838 = DIRECTION('',(0.,-0.,1.)); +#171839 = CYLINDRICAL_SURFACE('',#171840,0.1); +#171840 = AXIS2_PLACEMENT_3D('',#171841,#171842,#171843); +#171841 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#171842 = DIRECTION('',(-0.,1.,-0.)); +#171843 = DIRECTION('',(0.,0.,1.)); +#171844 = ADVANCED_FACE('',(#171845),#171887,.T.); +#171845 = FACE_BOUND('',#171846,.T.); +#171846 = EDGE_LOOP('',(#171847,#171857,#171865,#171873,#171881)); +#171847 = ORIENTED_EDGE('',*,*,#171848,.F.); +#171848 = EDGE_CURVE('',#171849,#171851,#171853,.T.); +#171849 = VERTEX_POINT('',#171850); +#171850 = CARTESIAN_POINT('',(-0.375,0.1,-0.6)); +#171851 = VERTEX_POINT('',#171852); +#171852 = CARTESIAN_POINT('',(-0.375,0.1,0.75)); +#171853 = LINE('',#171854,#171855); +#171854 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#171855 = VECTOR('',#171856,1.); +#171856 = DIRECTION('',(-0.,-0.,1.)); +#171857 = ORIENTED_EDGE('',*,*,#171858,.F.); +#171858 = EDGE_CURVE('',#171859,#171849,#171861,.T.); +#171859 = VERTEX_POINT('',#171860); +#171860 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#171861 = LINE('',#171862,#171863); +#171862 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#171863 = VECTOR('',#171864,1.); +#171864 = DIRECTION('',(-0.707106781187,-0.,0.707106781187)); +#171865 = ORIENTED_EDGE('',*,*,#171866,.F.); +#171866 = EDGE_CURVE('',#171867,#171859,#171869,.T.); +#171867 = VERTEX_POINT('',#171868); +#171868 = CARTESIAN_POINT('',(0.375,1.E-01,-0.75)); +#171869 = LINE('',#171870,#171871); +#171870 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#171871 = VECTOR('',#171872,1.); +#171872 = DIRECTION('',(-1.,-0.,-0.)); +#171873 = ORIENTED_EDGE('',*,*,#171874,.T.); +#171874 = EDGE_CURVE('',#171867,#171875,#171877,.T.); +#171875 = VERTEX_POINT('',#171876); +#171876 = CARTESIAN_POINT('',(0.375,0.1,0.75)); +#171877 = LINE('',#171878,#171879); +#171878 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#171879 = VECTOR('',#171880,1.); +#171880 = DIRECTION('',(-0.,-0.,1.)); +#171881 = ORIENTED_EDGE('',*,*,#171882,.F.); +#171882 = EDGE_CURVE('',#171851,#171875,#171883,.T.); +#171883 = LINE('',#171884,#171885); +#171884 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#171885 = VECTOR('',#171886,1.); +#171886 = DIRECTION('',(1.,0.,0.)); +#171887 = PLANE('',#171888); +#171888 = AXIS2_PLACEMENT_3D('',#171889,#171890,#171891); +#171889 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171890 = DIRECTION('',(0.,-1.,0.)); +#171891 = DIRECTION('',(0.,-0.,-1.)); +#171892 = ADVANCED_FACE('',(#171893),#171927,.F.); +#171893 = FACE_BOUND('',#171894,.T.); +#171894 = EDGE_LOOP('',(#171895,#171905,#171913,#171921)); +#171895 = ORIENTED_EDGE('',*,*,#171896,.F.); +#171896 = EDGE_CURVE('',#171897,#171899,#171901,.T.); +#171897 = VERTEX_POINT('',#171898); +#171898 = CARTESIAN_POINT('',(-0.95,0.1,0.7)); +#171899 = VERTEX_POINT('',#171900); +#171900 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#171901 = LINE('',#171902,#171903); +#171902 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#171903 = VECTOR('',#171904,1.); +#171904 = DIRECTION('',(-1.,-0.,-0.)); +#171905 = ORIENTED_EDGE('',*,*,#171906,.T.); +#171906 = EDGE_CURVE('',#171897,#171907,#171909,.T.); +#171907 = VERTEX_POINT('',#171908); +#171908 = CARTESIAN_POINT('',(-0.95,0.1,0.9)); +#171909 = LINE('',#171910,#171911); +#171910 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#171911 = VECTOR('',#171912,1.); +#171912 = DIRECTION('',(-0.,-0.,1.)); +#171913 = ORIENTED_EDGE('',*,*,#171914,.F.); +#171914 = EDGE_CURVE('',#171915,#171907,#171917,.T.); +#171915 = VERTEX_POINT('',#171916); +#171916 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#171917 = LINE('',#171918,#171919); +#171918 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#171919 = VECTOR('',#171920,1.); +#171920 = DIRECTION('',(1.,0.,0.)); +#171921 = ORIENTED_EDGE('',*,*,#171922,.F.); +#171922 = EDGE_CURVE('',#171899,#171915,#171923,.T.); +#171923 = LINE('',#171924,#171925); +#171924 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#171925 = VECTOR('',#171926,1.); +#171926 = DIRECTION('',(0.,0.,1.)); +#171927 = PLANE('',#171928); +#171928 = AXIS2_PLACEMENT_3D('',#171929,#171930,#171931); +#171929 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171930 = DIRECTION('',(0.,1.,0.)); +#171931 = DIRECTION('',(0.,-0.,1.)); +#171932 = ADVANCED_FACE('',(#171933),#171967,.F.); +#171933 = FACE_BOUND('',#171934,.T.); +#171934 = EDGE_LOOP('',(#171935,#171945,#171953,#171961)); +#171935 = ORIENTED_EDGE('',*,*,#171936,.F.); +#171936 = EDGE_CURVE('',#171937,#171939,#171941,.T.); +#171937 = VERTEX_POINT('',#171938); +#171938 = CARTESIAN_POINT('',(-0.95,0.1,0.3)); +#171939 = VERTEX_POINT('',#171940); +#171940 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171941 = LINE('',#171942,#171943); +#171942 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171943 = VECTOR('',#171944,1.); +#171944 = DIRECTION('',(-1.,-0.,-0.)); +#171945 = ORIENTED_EDGE('',*,*,#171946,.T.); +#171946 = EDGE_CURVE('',#171937,#171947,#171949,.T.); +#171947 = VERTEX_POINT('',#171948); +#171948 = CARTESIAN_POINT('',(-0.95,0.1,0.5)); +#171949 = LINE('',#171950,#171951); +#171950 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#171951 = VECTOR('',#171952,1.); +#171952 = DIRECTION('',(-0.,-0.,1.)); +#171953 = ORIENTED_EDGE('',*,*,#171954,.F.); +#171954 = EDGE_CURVE('',#171955,#171947,#171957,.T.); +#171955 = VERTEX_POINT('',#171956); +#171956 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171957 = LINE('',#171958,#171959); +#171958 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#171959 = VECTOR('',#171960,1.); +#171960 = DIRECTION('',(1.,0.,0.)); +#171961 = ORIENTED_EDGE('',*,*,#171962,.F.); +#171962 = EDGE_CURVE('',#171939,#171955,#171963,.T.); +#171963 = LINE('',#171964,#171965); +#171964 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#171965 = VECTOR('',#171966,1.); +#171966 = DIRECTION('',(0.,0.,1.)); +#171967 = PLANE('',#171968); +#171968 = AXIS2_PLACEMENT_3D('',#171969,#171970,#171971); +#171969 = CARTESIAN_POINT('',(0.,0.1,0.)); +#171970 = DIRECTION('',(0.,1.,0.)); +#171971 = DIRECTION('',(0.,-0.,1.)); +#171972 = ADVANCED_FACE('',(#171973),#172007,.F.); +#171973 = FACE_BOUND('',#171974,.T.); +#171974 = EDGE_LOOP('',(#171975,#171985,#171993,#172001)); +#171975 = ORIENTED_EDGE('',*,*,#171976,.F.); +#171976 = EDGE_CURVE('',#171977,#171979,#171981,.T.); +#171977 = VERTEX_POINT('',#171978); +#171978 = CARTESIAN_POINT('',(-0.95,0.1,-0.9)); +#171979 = VERTEX_POINT('',#171980); +#171980 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#171981 = LINE('',#171982,#171983); +#171982 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#171983 = VECTOR('',#171984,1.); +#171984 = DIRECTION('',(-1.,-0.,-0.)); +#171985 = ORIENTED_EDGE('',*,*,#171986,.T.); +#171986 = EDGE_CURVE('',#171977,#171987,#171989,.T.); +#171987 = VERTEX_POINT('',#171988); +#171988 = CARTESIAN_POINT('',(-0.95,0.1,-0.7)); +#171989 = LINE('',#171990,#171991); +#171990 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#171991 = VECTOR('',#171992,1.); +#171992 = DIRECTION('',(-0.,-0.,1.)); +#171993 = ORIENTED_EDGE('',*,*,#171994,.F.); +#171994 = EDGE_CURVE('',#171995,#171987,#171997,.T.); +#171995 = VERTEX_POINT('',#171996); +#171996 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#171997 = LINE('',#171998,#171999); +#171998 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#171999 = VECTOR('',#172000,1.); +#172000 = DIRECTION('',(1.,0.,0.)); +#172001 = ORIENTED_EDGE('',*,*,#172002,.F.); +#172002 = EDGE_CURVE('',#171979,#171995,#172003,.T.); +#172003 = LINE('',#172004,#172005); +#172004 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#172005 = VECTOR('',#172006,1.); +#172006 = DIRECTION('',(0.,0.,1.)); +#172007 = PLANE('',#172008); +#172008 = AXIS2_PLACEMENT_3D('',#172009,#172010,#172011); +#172009 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172010 = DIRECTION('',(0.,1.,0.)); +#172011 = DIRECTION('',(0.,-0.,1.)); +#172012 = ADVANCED_FACE('',(#172013),#172047,.F.); +#172013 = FACE_BOUND('',#172014,.T.); +#172014 = EDGE_LOOP('',(#172015,#172025,#172033,#172041)); +#172015 = ORIENTED_EDGE('',*,*,#172016,.F.); +#172016 = EDGE_CURVE('',#172017,#172019,#172021,.T.); +#172017 = VERTEX_POINT('',#172018); +#172018 = CARTESIAN_POINT('',(0.95,1.E-01,-0.7)); +#172019 = VERTEX_POINT('',#172020); +#172020 = CARTESIAN_POINT('',(1.1,0.1,-0.7)); +#172021 = LINE('',#172022,#172023); +#172022 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#172023 = VECTOR('',#172024,1.); +#172024 = DIRECTION('',(1.,0.,0.)); +#172025 = ORIENTED_EDGE('',*,*,#172026,.F.); +#172026 = EDGE_CURVE('',#172027,#172017,#172029,.T.); +#172027 = VERTEX_POINT('',#172028); +#172028 = CARTESIAN_POINT('',(0.95,1.E-01,-0.9)); +#172029 = LINE('',#172030,#172031); +#172030 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#172031 = VECTOR('',#172032,1.); +#172032 = DIRECTION('',(-0.,-0.,1.)); +#172033 = ORIENTED_EDGE('',*,*,#172034,.F.); +#172034 = EDGE_CURVE('',#172035,#172027,#172037,.T.); +#172035 = VERTEX_POINT('',#172036); +#172036 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#172037 = LINE('',#172038,#172039); +#172038 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#172039 = VECTOR('',#172040,1.); +#172040 = DIRECTION('',(-1.,-0.,-0.)); +#172041 = ORIENTED_EDGE('',*,*,#172042,.F.); +#172042 = EDGE_CURVE('',#172019,#172035,#172043,.T.); +#172043 = LINE('',#172044,#172045); +#172044 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#172045 = VECTOR('',#172046,1.); +#172046 = DIRECTION('',(-0.,-0.,-1.)); +#172047 = PLANE('',#172048); +#172048 = AXIS2_PLACEMENT_3D('',#172049,#172050,#172051); +#172049 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172050 = DIRECTION('',(0.,1.,0.)); +#172051 = DIRECTION('',(0.,-0.,1.)); +#172052 = ADVANCED_FACE('',(#172053),#172087,.F.); +#172053 = FACE_BOUND('',#172054,.T.); +#172054 = EDGE_LOOP('',(#172055,#172065,#172073,#172081)); +#172055 = ORIENTED_EDGE('',*,*,#172056,.F.); +#172056 = EDGE_CURVE('',#172057,#172059,#172061,.T.); +#172057 = VERTEX_POINT('',#172058); +#172058 = CARTESIAN_POINT('',(0.95,1.E-01,-0.3)); +#172059 = VERTEX_POINT('',#172060); +#172060 = CARTESIAN_POINT('',(1.1,0.1,-0.3)); +#172061 = LINE('',#172062,#172063); +#172062 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#172063 = VECTOR('',#172064,1.); +#172064 = DIRECTION('',(1.,0.,0.)); +#172065 = ORIENTED_EDGE('',*,*,#172066,.F.); +#172066 = EDGE_CURVE('',#172067,#172057,#172069,.T.); +#172067 = VERTEX_POINT('',#172068); +#172068 = CARTESIAN_POINT('',(0.95,1.E-01,-0.5)); +#172069 = LINE('',#172070,#172071); +#172070 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#172071 = VECTOR('',#172072,1.); +#172072 = DIRECTION('',(-0.,-0.,1.)); +#172073 = ORIENTED_EDGE('',*,*,#172074,.F.); +#172074 = EDGE_CURVE('',#172075,#172067,#172077,.T.); +#172075 = VERTEX_POINT('',#172076); +#172076 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#172077 = LINE('',#172078,#172079); +#172078 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#172079 = VECTOR('',#172080,1.); +#172080 = DIRECTION('',(-1.,-0.,-0.)); +#172081 = ORIENTED_EDGE('',*,*,#172082,.F.); +#172082 = EDGE_CURVE('',#172059,#172075,#172083,.T.); +#172083 = LINE('',#172084,#172085); +#172084 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#172085 = VECTOR('',#172086,1.); +#172086 = DIRECTION('',(-0.,-0.,-1.)); +#172087 = PLANE('',#172088); +#172088 = AXIS2_PLACEMENT_3D('',#172089,#172090,#172091); +#172089 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172090 = DIRECTION('',(0.,1.,0.)); +#172091 = DIRECTION('',(0.,-0.,1.)); +#172092 = ADVANCED_FACE('',(#172093),#172127,.F.); +#172093 = FACE_BOUND('',#172094,.T.); +#172094 = EDGE_LOOP('',(#172095,#172105,#172113,#172121)); +#172095 = ORIENTED_EDGE('',*,*,#172096,.F.); +#172096 = EDGE_CURVE('',#172097,#172099,#172101,.T.); +#172097 = VERTEX_POINT('',#172098); +#172098 = CARTESIAN_POINT('',(0.95,1.E-01,0.1)); +#172099 = VERTEX_POINT('',#172100); +#172100 = CARTESIAN_POINT('',(1.1,0.1,0.1)); +#172101 = LINE('',#172102,#172103); +#172102 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#172103 = VECTOR('',#172104,1.); +#172104 = DIRECTION('',(1.,0.,0.)); +#172105 = ORIENTED_EDGE('',*,*,#172106,.F.); +#172106 = EDGE_CURVE('',#172107,#172097,#172109,.T.); +#172107 = VERTEX_POINT('',#172108); +#172108 = CARTESIAN_POINT('',(0.95,1.E-01,-0.1)); +#172109 = LINE('',#172110,#172111); +#172110 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#172111 = VECTOR('',#172112,1.); +#172112 = DIRECTION('',(-0.,-0.,1.)); +#172113 = ORIENTED_EDGE('',*,*,#172114,.F.); +#172114 = EDGE_CURVE('',#172115,#172107,#172117,.T.); +#172115 = VERTEX_POINT('',#172116); +#172116 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#172117 = LINE('',#172118,#172119); +#172118 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#172119 = VECTOR('',#172120,1.); +#172120 = DIRECTION('',(-1.,-0.,-0.)); +#172121 = ORIENTED_EDGE('',*,*,#172122,.F.); +#172122 = EDGE_CURVE('',#172099,#172115,#172123,.T.); +#172123 = LINE('',#172124,#172125); +#172124 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#172125 = VECTOR('',#172126,1.); +#172126 = DIRECTION('',(-0.,-0.,-1.)); +#172127 = PLANE('',#172128); +#172128 = AXIS2_PLACEMENT_3D('',#172129,#172130,#172131); +#172129 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172130 = DIRECTION('',(0.,1.,0.)); +#172131 = DIRECTION('',(0.,-0.,1.)); +#172132 = ADVANCED_FACE('',(#172133),#172167,.F.); +#172133 = FACE_BOUND('',#172134,.T.); +#172134 = EDGE_LOOP('',(#172135,#172145,#172153,#172161)); +#172135 = ORIENTED_EDGE('',*,*,#172136,.F.); +#172136 = EDGE_CURVE('',#172137,#172139,#172141,.T.); +#172137 = VERTEX_POINT('',#172138); +#172138 = CARTESIAN_POINT('',(0.95,1.E-01,0.5)); +#172139 = VERTEX_POINT('',#172140); +#172140 = CARTESIAN_POINT('',(1.1,0.1,0.5)); +#172141 = LINE('',#172142,#172143); +#172142 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#172143 = VECTOR('',#172144,1.); +#172144 = DIRECTION('',(1.,0.,0.)); +#172145 = ORIENTED_EDGE('',*,*,#172146,.F.); +#172146 = EDGE_CURVE('',#172147,#172137,#172149,.T.); +#172147 = VERTEX_POINT('',#172148); +#172148 = CARTESIAN_POINT('',(0.95,1.E-01,0.3)); +#172149 = LINE('',#172150,#172151); +#172150 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#172151 = VECTOR('',#172152,1.); +#172152 = DIRECTION('',(-0.,-0.,1.)); +#172153 = ORIENTED_EDGE('',*,*,#172154,.F.); +#172154 = EDGE_CURVE('',#172155,#172147,#172157,.T.); +#172155 = VERTEX_POINT('',#172156); +#172156 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#172157 = LINE('',#172158,#172159); +#172158 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#172159 = VECTOR('',#172160,1.); +#172160 = DIRECTION('',(-1.,-0.,-0.)); +#172161 = ORIENTED_EDGE('',*,*,#172162,.F.); +#172162 = EDGE_CURVE('',#172139,#172155,#172163,.T.); +#172163 = LINE('',#172164,#172165); +#172164 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#172165 = VECTOR('',#172166,1.); +#172166 = DIRECTION('',(-0.,-0.,-1.)); +#172167 = PLANE('',#172168); +#172168 = AXIS2_PLACEMENT_3D('',#172169,#172170,#172171); +#172169 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172170 = DIRECTION('',(0.,1.,0.)); +#172171 = DIRECTION('',(0.,-0.,1.)); +#172172 = ADVANCED_FACE('',(#172173),#172207,.F.); +#172173 = FACE_BOUND('',#172174,.T.); +#172174 = EDGE_LOOP('',(#172175,#172185,#172193,#172201)); +#172175 = ORIENTED_EDGE('',*,*,#172176,.F.); +#172176 = EDGE_CURVE('',#172177,#172179,#172181,.T.); +#172177 = VERTEX_POINT('',#172178); +#172178 = CARTESIAN_POINT('',(0.95,1.E-01,0.9)); +#172179 = VERTEX_POINT('',#172180); +#172180 = CARTESIAN_POINT('',(1.1,0.1,0.9)); +#172181 = LINE('',#172182,#172183); +#172182 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#172183 = VECTOR('',#172184,1.); +#172184 = DIRECTION('',(1.,0.,0.)); +#172185 = ORIENTED_EDGE('',*,*,#172186,.T.); +#172186 = EDGE_CURVE('',#172177,#172187,#172189,.T.); +#172187 = VERTEX_POINT('',#172188); +#172188 = CARTESIAN_POINT('',(0.95,1.E-01,0.7)); +#172189 = LINE('',#172190,#172191); +#172190 = CARTESIAN_POINT('',(0.95,0.1,0.)); +#172191 = VECTOR('',#172192,1.); +#172192 = DIRECTION('',(0.,0.,-1.)); +#172193 = ORIENTED_EDGE('',*,*,#172194,.F.); +#172194 = EDGE_CURVE('',#172195,#172187,#172197,.T.); +#172195 = VERTEX_POINT('',#172196); +#172196 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#172197 = LINE('',#172198,#172199); +#172198 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#172199 = VECTOR('',#172200,1.); +#172200 = DIRECTION('',(-1.,-0.,-0.)); +#172201 = ORIENTED_EDGE('',*,*,#172202,.F.); +#172202 = EDGE_CURVE('',#172179,#172195,#172203,.T.); +#172203 = LINE('',#172204,#172205); +#172204 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#172205 = VECTOR('',#172206,1.); +#172206 = DIRECTION('',(-0.,-0.,-1.)); +#172207 = PLANE('',#172208); +#172208 = AXIS2_PLACEMENT_3D('',#172209,#172210,#172211); +#172209 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172210 = DIRECTION('',(0.,1.,0.)); +#172211 = DIRECTION('',(0.,-0.,1.)); +#172212 = ADVANCED_FACE('',(#172213),#172247,.F.); +#172213 = FACE_BOUND('',#172214,.T.); +#172214 = EDGE_LOOP('',(#172215,#172225,#172233,#172241)); +#172215 = ORIENTED_EDGE('',*,*,#172216,.F.); +#172216 = EDGE_CURVE('',#172217,#172219,#172221,.T.); +#172217 = VERTEX_POINT('',#172218); +#172218 = CARTESIAN_POINT('',(-0.95,0.1,-0.5)); +#172219 = VERTEX_POINT('',#172220); +#172220 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#172221 = LINE('',#172222,#172223); +#172222 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#172223 = VECTOR('',#172224,1.); +#172224 = DIRECTION('',(-1.,-0.,-0.)); +#172225 = ORIENTED_EDGE('',*,*,#172226,.T.); +#172226 = EDGE_CURVE('',#172217,#172227,#172229,.T.); +#172227 = VERTEX_POINT('',#172228); +#172228 = CARTESIAN_POINT('',(-0.95,0.1,-0.3)); +#172229 = LINE('',#172230,#172231); +#172230 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#172231 = VECTOR('',#172232,1.); +#172232 = DIRECTION('',(-0.,-0.,1.)); +#172233 = ORIENTED_EDGE('',*,*,#172234,.F.); +#172234 = EDGE_CURVE('',#172235,#172227,#172237,.T.); +#172235 = VERTEX_POINT('',#172236); +#172236 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#172237 = LINE('',#172238,#172239); +#172238 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#172239 = VECTOR('',#172240,1.); +#172240 = DIRECTION('',(1.,0.,0.)); +#172241 = ORIENTED_EDGE('',*,*,#172242,.F.); +#172242 = EDGE_CURVE('',#172219,#172235,#172243,.T.); +#172243 = LINE('',#172244,#172245); +#172244 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#172245 = VECTOR('',#172246,1.); +#172246 = DIRECTION('',(0.,0.,1.)); +#172247 = PLANE('',#172248); +#172248 = AXIS2_PLACEMENT_3D('',#172249,#172250,#172251); +#172249 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172250 = DIRECTION('',(0.,1.,0.)); +#172251 = DIRECTION('',(0.,-0.,1.)); +#172252 = ADVANCED_FACE('',(#172253),#172287,.F.); +#172253 = FACE_BOUND('',#172254,.T.); +#172254 = EDGE_LOOP('',(#172255,#172265,#172273,#172281)); +#172255 = ORIENTED_EDGE('',*,*,#172256,.F.); +#172256 = EDGE_CURVE('',#172257,#172259,#172261,.T.); +#172257 = VERTEX_POINT('',#172258); +#172258 = CARTESIAN_POINT('',(-0.95,0.1,-0.1)); +#172259 = VERTEX_POINT('',#172260); +#172260 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#172261 = LINE('',#172262,#172263); +#172262 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#172263 = VECTOR('',#172264,1.); +#172264 = DIRECTION('',(-1.,-0.,-0.)); +#172265 = ORIENTED_EDGE('',*,*,#172266,.T.); +#172266 = EDGE_CURVE('',#172257,#172267,#172269,.T.); +#172267 = VERTEX_POINT('',#172268); +#172268 = CARTESIAN_POINT('',(-0.95,0.1,0.1)); +#172269 = LINE('',#172270,#172271); +#172270 = CARTESIAN_POINT('',(-0.95,0.1,0.)); +#172271 = VECTOR('',#172272,1.); +#172272 = DIRECTION('',(0.,0.,1.)); +#172273 = ORIENTED_EDGE('',*,*,#172274,.F.); +#172274 = EDGE_CURVE('',#172275,#172267,#172277,.T.); +#172275 = VERTEX_POINT('',#172276); +#172276 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#172277 = LINE('',#172278,#172279); +#172278 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#172279 = VECTOR('',#172280,1.); +#172280 = DIRECTION('',(1.,0.,0.)); +#172281 = ORIENTED_EDGE('',*,*,#172282,.F.); +#172282 = EDGE_CURVE('',#172259,#172275,#172283,.T.); +#172283 = LINE('',#172284,#172285); +#172284 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#172285 = VECTOR('',#172286,1.); +#172286 = DIRECTION('',(0.,0.,1.)); +#172287 = PLANE('',#172288); +#172288 = AXIS2_PLACEMENT_3D('',#172289,#172290,#172291); +#172289 = CARTESIAN_POINT('',(0.,0.1,0.)); +#172290 = DIRECTION('',(0.,1.,0.)); +#172291 = DIRECTION('',(0.,-0.,1.)); +#172292 = ADVANCED_FACE('',(#172293),#172442,.T.); +#172293 = FACE_BOUND('',#172294,.T.); +#172294 = EDGE_LOOP('',(#172295,#172305,#172311,#172312,#172320,#172328, + #172334,#172335,#172343,#172351,#172357,#172358,#172366,#172374, + #172380,#172381,#172389,#172397,#172403,#172404,#172412,#172420, + #172428,#172436)); +#172295 = ORIENTED_EDGE('',*,*,#172296,.T.); +#172296 = EDGE_CURVE('',#172297,#172299,#172301,.T.); +#172297 = VERTEX_POINT('',#172298); +#172298 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172299 = VERTEX_POINT('',#172300); +#172300 = CARTESIAN_POINT('',(1.1,5.E-02,0.9)); +#172301 = LINE('',#172302,#172303); +#172302 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172303 = VECTOR('',#172304,1.); +#172304 = DIRECTION('',(0.,0.,-1.)); +#172305 = ORIENTED_EDGE('',*,*,#172306,.F.); +#172306 = EDGE_CURVE('',#172179,#172299,#172307,.T.); +#172307 = LINE('',#172308,#172309); +#172308 = CARTESIAN_POINT('',(1.1,0.1,0.9)); +#172309 = VECTOR('',#172310,1.); +#172310 = DIRECTION('',(0.,-1.,0.)); +#172311 = ORIENTED_EDGE('',*,*,#172202,.T.); +#172312 = ORIENTED_EDGE('',*,*,#172313,.T.); +#172313 = EDGE_CURVE('',#172195,#172314,#172316,.T.); +#172314 = VERTEX_POINT('',#172315); +#172315 = CARTESIAN_POINT('',(1.1,5.E-02,0.7)); +#172316 = LINE('',#172317,#172318); +#172317 = CARTESIAN_POINT('',(1.1,0.1,0.7)); +#172318 = VECTOR('',#172319,1.); +#172319 = DIRECTION('',(0.,-1.,0.)); +#172320 = ORIENTED_EDGE('',*,*,#172321,.T.); +#172321 = EDGE_CURVE('',#172314,#172322,#172324,.T.); +#172322 = VERTEX_POINT('',#172323); +#172323 = CARTESIAN_POINT('',(1.1,5.E-02,0.5)); +#172324 = LINE('',#172325,#172326); +#172325 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172326 = VECTOR('',#172327,1.); +#172327 = DIRECTION('',(0.,0.,-1.)); +#172328 = ORIENTED_EDGE('',*,*,#172329,.F.); +#172329 = EDGE_CURVE('',#172139,#172322,#172330,.T.); +#172330 = LINE('',#172331,#172332); +#172331 = CARTESIAN_POINT('',(1.1,0.1,0.5)); +#172332 = VECTOR('',#172333,1.); +#172333 = DIRECTION('',(0.,-1.,0.)); +#172334 = ORIENTED_EDGE('',*,*,#172162,.T.); +#172335 = ORIENTED_EDGE('',*,*,#172336,.T.); +#172336 = EDGE_CURVE('',#172155,#172337,#172339,.T.); +#172337 = VERTEX_POINT('',#172338); +#172338 = CARTESIAN_POINT('',(1.1,5.E-02,0.3)); +#172339 = LINE('',#172340,#172341); +#172340 = CARTESIAN_POINT('',(1.1,0.1,0.3)); +#172341 = VECTOR('',#172342,1.); +#172342 = DIRECTION('',(0.,-1.,0.)); +#172343 = ORIENTED_EDGE('',*,*,#172344,.T.); +#172344 = EDGE_CURVE('',#172337,#172345,#172347,.T.); +#172345 = VERTEX_POINT('',#172346); +#172346 = CARTESIAN_POINT('',(1.1,5.E-02,0.1)); +#172347 = LINE('',#172348,#172349); +#172348 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172349 = VECTOR('',#172350,1.); +#172350 = DIRECTION('',(0.,0.,-1.)); +#172351 = ORIENTED_EDGE('',*,*,#172352,.F.); +#172352 = EDGE_CURVE('',#172099,#172345,#172353,.T.); +#172353 = LINE('',#172354,#172355); +#172354 = CARTESIAN_POINT('',(1.1,0.1,0.1)); +#172355 = VECTOR('',#172356,1.); +#172356 = DIRECTION('',(0.,-1.,0.)); +#172357 = ORIENTED_EDGE('',*,*,#172122,.T.); +#172358 = ORIENTED_EDGE('',*,*,#172359,.T.); +#172359 = EDGE_CURVE('',#172115,#172360,#172362,.T.); +#172360 = VERTEX_POINT('',#172361); +#172361 = CARTESIAN_POINT('',(1.1,5.E-02,-0.1)); +#172362 = LINE('',#172363,#172364); +#172363 = CARTESIAN_POINT('',(1.1,0.1,-0.1)); +#172364 = VECTOR('',#172365,1.); +#172365 = DIRECTION('',(0.,-1.,0.)); +#172366 = ORIENTED_EDGE('',*,*,#172367,.T.); +#172367 = EDGE_CURVE('',#172360,#172368,#172370,.T.); +#172368 = VERTEX_POINT('',#172369); +#172369 = CARTESIAN_POINT('',(1.1,5.E-02,-0.3)); +#172370 = LINE('',#172371,#172372); +#172371 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172372 = VECTOR('',#172373,1.); +#172373 = DIRECTION('',(0.,0.,-1.)); +#172374 = ORIENTED_EDGE('',*,*,#172375,.F.); +#172375 = EDGE_CURVE('',#172059,#172368,#172376,.T.); +#172376 = LINE('',#172377,#172378); +#172377 = CARTESIAN_POINT('',(1.1,0.1,-0.3)); +#172378 = VECTOR('',#172379,1.); +#172379 = DIRECTION('',(0.,-1.,0.)); +#172380 = ORIENTED_EDGE('',*,*,#172082,.T.); +#172381 = ORIENTED_EDGE('',*,*,#172382,.T.); +#172382 = EDGE_CURVE('',#172075,#172383,#172385,.T.); +#172383 = VERTEX_POINT('',#172384); +#172384 = CARTESIAN_POINT('',(1.1,5.E-02,-0.5)); +#172385 = LINE('',#172386,#172387); +#172386 = CARTESIAN_POINT('',(1.1,0.1,-0.5)); +#172387 = VECTOR('',#172388,1.); +#172388 = DIRECTION('',(0.,-1.,0.)); +#172389 = ORIENTED_EDGE('',*,*,#172390,.T.); +#172390 = EDGE_CURVE('',#172383,#172391,#172393,.T.); +#172391 = VERTEX_POINT('',#172392); +#172392 = CARTESIAN_POINT('',(1.1,5.E-02,-0.7)); +#172393 = LINE('',#172394,#172395); +#172394 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172395 = VECTOR('',#172396,1.); +#172396 = DIRECTION('',(0.,0.,-1.)); +#172397 = ORIENTED_EDGE('',*,*,#172398,.F.); +#172398 = EDGE_CURVE('',#172019,#172391,#172399,.T.); +#172399 = LINE('',#172400,#172401); +#172400 = CARTESIAN_POINT('',(1.1,0.1,-0.7)); +#172401 = VECTOR('',#172402,1.); +#172402 = DIRECTION('',(0.,-1.,0.)); +#172403 = ORIENTED_EDGE('',*,*,#172042,.T.); +#172404 = ORIENTED_EDGE('',*,*,#172405,.T.); +#172405 = EDGE_CURVE('',#172035,#172406,#172408,.T.); +#172406 = VERTEX_POINT('',#172407); +#172407 = CARTESIAN_POINT('',(1.1,5.E-02,-0.9)); +#172408 = LINE('',#172409,#172410); +#172409 = CARTESIAN_POINT('',(1.1,0.1,-0.9)); +#172410 = VECTOR('',#172411,1.); +#172411 = DIRECTION('',(0.,-1.,0.)); +#172412 = ORIENTED_EDGE('',*,*,#172413,.T.); +#172413 = EDGE_CURVE('',#172406,#172414,#172416,.T.); +#172414 = VERTEX_POINT('',#172415); +#172415 = CARTESIAN_POINT('',(1.1,5.E-02,-1.)); +#172416 = LINE('',#172417,#172418); +#172417 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172418 = VECTOR('',#172419,1.); +#172419 = DIRECTION('',(0.,0.,-1.)); +#172420 = ORIENTED_EDGE('',*,*,#172421,.T.); +#172421 = EDGE_CURVE('',#172414,#172422,#172424,.T.); +#172422 = VERTEX_POINT('',#172423); +#172423 = CARTESIAN_POINT('',(1.1,0.8,-1.)); +#172424 = LINE('',#172425,#172426); +#172425 = CARTESIAN_POINT('',(1.1,5.E-02,-1.)); +#172426 = VECTOR('',#172427,1.); +#172427 = DIRECTION('',(0.,1.,0.)); +#172428 = ORIENTED_EDGE('',*,*,#172429,.F.); +#172429 = EDGE_CURVE('',#172430,#172422,#172432,.T.); +#172430 = VERTEX_POINT('',#172431); +#172431 = CARTESIAN_POINT('',(1.1,0.8,1.)); +#172432 = LINE('',#172433,#172434); +#172433 = CARTESIAN_POINT('',(1.1,0.8,1.)); +#172434 = VECTOR('',#172435,1.); +#172435 = DIRECTION('',(0.,0.,-1.)); +#172436 = ORIENTED_EDGE('',*,*,#172437,.F.); +#172437 = EDGE_CURVE('',#172297,#172430,#172438,.T.); +#172438 = LINE('',#172439,#172440); +#172439 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172440 = VECTOR('',#172441,1.); +#172441 = DIRECTION('',(0.,1.,0.)); +#172442 = PLANE('',#172443); +#172443 = AXIS2_PLACEMENT_3D('',#172444,#172445,#172446); +#172444 = CARTESIAN_POINT('',(1.1,5.E-02,1.)); +#172445 = DIRECTION('',(1.,-0.,0.)); +#172446 = DIRECTION('',(0.,0.,-1.)); +#172447 = ADVANCED_FACE('',(#172448),#172597,.T.); +#172448 = FACE_BOUND('',#172449,.T.); +#172449 = EDGE_LOOP('',(#172450,#172451,#172459,#172467,#172473,#172474, + #172482,#172490,#172496,#172497,#172505,#172513,#172521,#172529, + #172537,#172545,#172551,#172552,#172560,#172568,#172574,#172575, + #172583,#172591)); +#172450 = ORIENTED_EDGE('',*,*,#172282,.T.); +#172451 = ORIENTED_EDGE('',*,*,#172452,.T.); +#172452 = EDGE_CURVE('',#172275,#172453,#172455,.T.); +#172453 = VERTEX_POINT('',#172454); +#172454 = CARTESIAN_POINT('',(-1.1,5.E-02,0.1)); +#172455 = LINE('',#172456,#172457); +#172456 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#172457 = VECTOR('',#172458,1.); +#172458 = DIRECTION('',(0.,-1.,0.)); +#172459 = ORIENTED_EDGE('',*,*,#172460,.T.); +#172460 = EDGE_CURVE('',#172453,#172461,#172463,.T.); +#172461 = VERTEX_POINT('',#172462); +#172462 = CARTESIAN_POINT('',(-1.1,5.E-02,0.3)); +#172463 = LINE('',#172464,#172465); +#172464 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172465 = VECTOR('',#172466,1.); +#172466 = DIRECTION('',(-0.,-0.,1.)); +#172467 = ORIENTED_EDGE('',*,*,#172468,.F.); +#172468 = EDGE_CURVE('',#171939,#172461,#172469,.T.); +#172469 = LINE('',#172470,#172471); +#172470 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#172471 = VECTOR('',#172472,1.); +#172472 = DIRECTION('',(0.,-1.,0.)); +#172473 = ORIENTED_EDGE('',*,*,#171962,.T.); +#172474 = ORIENTED_EDGE('',*,*,#172475,.T.); +#172475 = EDGE_CURVE('',#171955,#172476,#172478,.T.); +#172476 = VERTEX_POINT('',#172477); +#172477 = CARTESIAN_POINT('',(-1.1,5.E-02,0.5)); +#172478 = LINE('',#172479,#172480); +#172479 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#172480 = VECTOR('',#172481,1.); +#172481 = DIRECTION('',(0.,-1.,0.)); +#172482 = ORIENTED_EDGE('',*,*,#172483,.T.); +#172483 = EDGE_CURVE('',#172476,#172484,#172486,.T.); +#172484 = VERTEX_POINT('',#172485); +#172485 = CARTESIAN_POINT('',(-1.1,5.E-02,0.7)); +#172486 = LINE('',#172487,#172488); +#172487 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172488 = VECTOR('',#172489,1.); +#172489 = DIRECTION('',(-0.,-0.,1.)); +#172490 = ORIENTED_EDGE('',*,*,#172491,.F.); +#172491 = EDGE_CURVE('',#171899,#172484,#172492,.T.); +#172492 = LINE('',#172493,#172494); +#172493 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#172494 = VECTOR('',#172495,1.); +#172495 = DIRECTION('',(0.,-1.,0.)); +#172496 = ORIENTED_EDGE('',*,*,#171922,.T.); +#172497 = ORIENTED_EDGE('',*,*,#172498,.T.); +#172498 = EDGE_CURVE('',#171915,#172499,#172501,.T.); +#172499 = VERTEX_POINT('',#172500); +#172500 = CARTESIAN_POINT('',(-1.1,5.E-02,0.9)); +#172501 = LINE('',#172502,#172503); +#172502 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#172503 = VECTOR('',#172504,1.); +#172504 = DIRECTION('',(0.,-1.,0.)); +#172505 = ORIENTED_EDGE('',*,*,#172506,.T.); +#172506 = EDGE_CURVE('',#172499,#172507,#172509,.T.); +#172507 = VERTEX_POINT('',#172508); +#172508 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172509 = LINE('',#172510,#172511); +#172510 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172511 = VECTOR('',#172512,1.); +#172512 = DIRECTION('',(-0.,-0.,1.)); +#172513 = ORIENTED_EDGE('',*,*,#172514,.T.); +#172514 = EDGE_CURVE('',#172507,#172515,#172517,.T.); +#172515 = VERTEX_POINT('',#172516); +#172516 = CARTESIAN_POINT('',(-1.1,0.8,1.)); +#172517 = LINE('',#172518,#172519); +#172518 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172519 = VECTOR('',#172520,1.); +#172520 = DIRECTION('',(0.,1.,0.)); +#172521 = ORIENTED_EDGE('',*,*,#172522,.F.); +#172522 = EDGE_CURVE('',#172523,#172515,#172525,.T.); +#172523 = VERTEX_POINT('',#172524); +#172524 = CARTESIAN_POINT('',(-1.1,0.8,-1.)); +#172525 = LINE('',#172526,#172527); +#172526 = CARTESIAN_POINT('',(-1.1,0.8,1.)); +#172527 = VECTOR('',#172528,1.); +#172528 = DIRECTION('',(-0.,-0.,1.)); +#172529 = ORIENTED_EDGE('',*,*,#172530,.F.); +#172530 = EDGE_CURVE('',#172531,#172523,#172533,.T.); +#172531 = VERTEX_POINT('',#172532); +#172532 = CARTESIAN_POINT('',(-1.1,5.E-02,-1.)); +#172533 = LINE('',#172534,#172535); +#172534 = CARTESIAN_POINT('',(-1.1,5.E-02,-1.)); +#172535 = VECTOR('',#172536,1.); +#172536 = DIRECTION('',(0.,1.,0.)); +#172537 = ORIENTED_EDGE('',*,*,#172538,.T.); +#172538 = EDGE_CURVE('',#172531,#172539,#172541,.T.); +#172539 = VERTEX_POINT('',#172540); +#172540 = CARTESIAN_POINT('',(-1.1,5.E-02,-0.9)); +#172541 = LINE('',#172542,#172543); +#172542 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172543 = VECTOR('',#172544,1.); +#172544 = DIRECTION('',(-0.,-0.,1.)); +#172545 = ORIENTED_EDGE('',*,*,#172546,.F.); +#172546 = EDGE_CURVE('',#171979,#172539,#172547,.T.); +#172547 = LINE('',#172548,#172549); +#172548 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#172549 = VECTOR('',#172550,1.); +#172550 = DIRECTION('',(0.,-1.,0.)); +#172551 = ORIENTED_EDGE('',*,*,#172002,.T.); +#172552 = ORIENTED_EDGE('',*,*,#172553,.T.); +#172553 = EDGE_CURVE('',#171995,#172554,#172556,.T.); +#172554 = VERTEX_POINT('',#172555); +#172555 = CARTESIAN_POINT('',(-1.1,5.E-02,-0.7)); +#172556 = LINE('',#172557,#172558); +#172557 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#172558 = VECTOR('',#172559,1.); +#172559 = DIRECTION('',(0.,-1.,0.)); +#172560 = ORIENTED_EDGE('',*,*,#172561,.T.); +#172561 = EDGE_CURVE('',#172554,#172562,#172564,.T.); +#172562 = VERTEX_POINT('',#172563); +#172563 = CARTESIAN_POINT('',(-1.1,5.E-02,-0.5)); +#172564 = LINE('',#172565,#172566); +#172565 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172566 = VECTOR('',#172567,1.); +#172567 = DIRECTION('',(-0.,-0.,1.)); +#172568 = ORIENTED_EDGE('',*,*,#172569,.F.); +#172569 = EDGE_CURVE('',#172219,#172562,#172570,.T.); +#172570 = LINE('',#172571,#172572); +#172571 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#172572 = VECTOR('',#172573,1.); +#172573 = DIRECTION('',(0.,-1.,0.)); +#172574 = ORIENTED_EDGE('',*,*,#172242,.T.); +#172575 = ORIENTED_EDGE('',*,*,#172576,.T.); +#172576 = EDGE_CURVE('',#172235,#172577,#172579,.T.); +#172577 = VERTEX_POINT('',#172578); +#172578 = CARTESIAN_POINT('',(-1.1,5.E-02,-0.3)); +#172579 = LINE('',#172580,#172581); +#172580 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#172581 = VECTOR('',#172582,1.); +#172582 = DIRECTION('',(0.,-1.,0.)); +#172583 = ORIENTED_EDGE('',*,*,#172584,.T.); +#172584 = EDGE_CURVE('',#172577,#172585,#172587,.T.); +#172585 = VERTEX_POINT('',#172586); +#172586 = CARTESIAN_POINT('',(-1.1,5.E-02,-0.1)); +#172587 = LINE('',#172588,#172589); +#172588 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172589 = VECTOR('',#172590,1.); +#172590 = DIRECTION('',(-0.,-0.,1.)); +#172591 = ORIENTED_EDGE('',*,*,#172592,.F.); +#172592 = EDGE_CURVE('',#172259,#172585,#172593,.T.); +#172593 = LINE('',#172594,#172595); +#172594 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#172595 = VECTOR('',#172596,1.); +#172596 = DIRECTION('',(0.,-1.,0.)); +#172597 = PLANE('',#172598); +#172598 = AXIS2_PLACEMENT_3D('',#172599,#172600,#172601); +#172599 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172600 = DIRECTION('',(-1.,0.,0.)); +#172601 = DIRECTION('',(0.,0.,1.)); +#172602 = ADVANCED_FACE('',(#172603,#172645),#172891,.T.); +#172603 = FACE_BOUND('',#172604,.T.); +#172604 = EDGE_LOOP('',(#172605,#172615,#172623,#172631,#172639)); +#172605 = ORIENTED_EDGE('',*,*,#172606,.T.); +#172606 = EDGE_CURVE('',#172607,#172609,#172611,.T.); +#172607 = VERTEX_POINT('',#172608); +#172608 = CARTESIAN_POINT('',(-0.45,5.E-02,0.75)); +#172609 = VERTEX_POINT('',#172610); +#172610 = CARTESIAN_POINT('',(0.45,5.E-02,0.75)); +#172611 = LINE('',#172612,#172613); +#172612 = CARTESIAN_POINT('',(-0.,5.E-02,0.75)); +#172613 = VECTOR('',#172614,1.); +#172614 = DIRECTION('',(1.,0.,0.)); +#172615 = ORIENTED_EDGE('',*,*,#172616,.T.); +#172616 = EDGE_CURVE('',#172609,#172617,#172619,.T.); +#172617 = VERTEX_POINT('',#172618); +#172618 = CARTESIAN_POINT('',(0.45,5.E-02,-0.75)); +#172619 = LINE('',#172620,#172621); +#172620 = CARTESIAN_POINT('',(0.45,5.E-02,0.)); +#172621 = VECTOR('',#172622,1.); +#172622 = DIRECTION('',(0.,0.,-1.)); +#172623 = ORIENTED_EDGE('',*,*,#172624,.T.); +#172624 = EDGE_CURVE('',#172617,#172625,#172627,.T.); +#172625 = VERTEX_POINT('',#172626); +#172626 = CARTESIAN_POINT('',(-0.225,5.E-02,-0.75)); +#172627 = LINE('',#172628,#172629); +#172628 = CARTESIAN_POINT('',(-0.,5.E-02,-0.75)); +#172629 = VECTOR('',#172630,1.); +#172630 = DIRECTION('',(-1.,0.,0.)); +#172631 = ORIENTED_EDGE('',*,*,#172632,.T.); +#172632 = EDGE_CURVE('',#172625,#172633,#172635,.T.); +#172633 = VERTEX_POINT('',#172634); +#172634 = CARTESIAN_POINT('',(-0.45,5.E-02,-0.525)); +#172635 = LINE('',#172636,#172637); +#172636 = CARTESIAN_POINT('',(-0.4875,5.E-02,-0.4875)); +#172637 = VECTOR('',#172638,1.); +#172638 = DIRECTION('',(-0.707106781187,0.,0.707106781187)); +#172639 = ORIENTED_EDGE('',*,*,#172640,.T.); +#172640 = EDGE_CURVE('',#172633,#172607,#172641,.T.); +#172641 = LINE('',#172642,#172643); +#172642 = CARTESIAN_POINT('',(-0.45,5.E-02,-0.)); +#172643 = VECTOR('',#172644,1.); +#172644 = DIRECTION('',(-0.,0.,1.)); +#172645 = FACE_BOUND('',#172646,.T.); +#172646 = EDGE_LOOP('',(#172647,#172648,#172656,#172664,#172670,#172671, + #172679,#172687,#172693,#172694,#172702,#172710,#172716,#172717, + #172723,#172724,#172732,#172740,#172746,#172747,#172755,#172763, + #172769,#172770,#172778,#172786,#172792,#172793,#172801,#172809, + #172815,#172816,#172824,#172832,#172838,#172839,#172845,#172846, + #172854,#172862,#172868,#172869,#172877,#172885)); +#172647 = ORIENTED_EDGE('',*,*,#172460,.F.); +#172648 = ORIENTED_EDGE('',*,*,#172649,.T.); +#172649 = EDGE_CURVE('',#172453,#172650,#172652,.T.); +#172650 = VERTEX_POINT('',#172651); +#172651 = CARTESIAN_POINT('',(-0.8,5.E-02,0.1)); +#172652 = LINE('',#172653,#172654); +#172653 = CARTESIAN_POINT('',(-0.,5.E-02,0.1)); +#172654 = VECTOR('',#172655,1.); +#172655 = DIRECTION('',(1.,0.,0.)); +#172656 = ORIENTED_EDGE('',*,*,#172657,.T.); +#172657 = EDGE_CURVE('',#172650,#172658,#172660,.T.); +#172658 = VERTEX_POINT('',#172659); +#172659 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.1)); +#172660 = LINE('',#172661,#172662); +#172661 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.)); +#172662 = VECTOR('',#172663,1.); +#172663 = DIRECTION('',(0.,0.,-1.)); +#172664 = ORIENTED_EDGE('',*,*,#172665,.T.); +#172665 = EDGE_CURVE('',#172658,#172585,#172666,.T.); +#172666 = LINE('',#172667,#172668); +#172667 = CARTESIAN_POINT('',(-0.,5.E-02,-0.1)); +#172668 = VECTOR('',#172669,1.); +#172669 = DIRECTION('',(-1.,0.,0.)); +#172670 = ORIENTED_EDGE('',*,*,#172584,.F.); +#172671 = ORIENTED_EDGE('',*,*,#172672,.T.); +#172672 = EDGE_CURVE('',#172577,#172673,#172675,.T.); +#172673 = VERTEX_POINT('',#172674); +#172674 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.3)); +#172675 = LINE('',#172676,#172677); +#172676 = CARTESIAN_POINT('',(0.,5.E-02,-0.3)); +#172677 = VECTOR('',#172678,1.); +#172678 = DIRECTION('',(1.,0.,0.)); +#172679 = ORIENTED_EDGE('',*,*,#172680,.T.); +#172680 = EDGE_CURVE('',#172673,#172681,#172683,.T.); +#172681 = VERTEX_POINT('',#172682); +#172682 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.5)); +#172683 = LINE('',#172684,#172685); +#172684 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.)); +#172685 = VECTOR('',#172686,1.); +#172686 = DIRECTION('',(0.,0.,-1.)); +#172687 = ORIENTED_EDGE('',*,*,#172688,.T.); +#172688 = EDGE_CURVE('',#172681,#172562,#172689,.T.); +#172689 = LINE('',#172690,#172691); +#172690 = CARTESIAN_POINT('',(-0.,5.E-02,-0.5)); +#172691 = VECTOR('',#172692,1.); +#172692 = DIRECTION('',(-1.,0.,0.)); +#172693 = ORIENTED_EDGE('',*,*,#172561,.F.); +#172694 = ORIENTED_EDGE('',*,*,#172695,.T.); +#172695 = EDGE_CURVE('',#172554,#172696,#172698,.T.); +#172696 = VERTEX_POINT('',#172697); +#172697 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.7)); +#172698 = LINE('',#172699,#172700); +#172699 = CARTESIAN_POINT('',(0.,5.E-02,-0.7)); +#172700 = VECTOR('',#172701,1.); +#172701 = DIRECTION('',(1.,0.,0.)); +#172702 = ORIENTED_EDGE('',*,*,#172703,.T.); +#172703 = EDGE_CURVE('',#172696,#172704,#172706,.T.); +#172704 = VERTEX_POINT('',#172705); +#172705 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.9)); +#172706 = LINE('',#172707,#172708); +#172707 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.)); +#172708 = VECTOR('',#172709,1.); +#172709 = DIRECTION('',(0.,0.,-1.)); +#172710 = ORIENTED_EDGE('',*,*,#172711,.T.); +#172711 = EDGE_CURVE('',#172704,#172539,#172712,.T.); +#172712 = LINE('',#172713,#172714); +#172713 = CARTESIAN_POINT('',(-0.,5.E-02,-0.9)); +#172714 = VECTOR('',#172715,1.); +#172715 = DIRECTION('',(-1.,0.,0.)); +#172716 = ORIENTED_EDGE('',*,*,#172538,.F.); +#172717 = ORIENTED_EDGE('',*,*,#172718,.F.); +#172718 = EDGE_CURVE('',#172414,#172531,#172719,.T.); +#172719 = LINE('',#172720,#172721); +#172720 = CARTESIAN_POINT('',(-1.1,5.E-02,-1.)); +#172721 = VECTOR('',#172722,1.); +#172722 = DIRECTION('',(-1.,-0.,-0.)); +#172723 = ORIENTED_EDGE('',*,*,#172413,.F.); +#172724 = ORIENTED_EDGE('',*,*,#172725,.T.); +#172725 = EDGE_CURVE('',#172406,#172726,#172728,.T.); +#172726 = VERTEX_POINT('',#172727); +#172727 = CARTESIAN_POINT('',(0.8,5.E-02,-0.9)); +#172728 = LINE('',#172729,#172730); +#172729 = CARTESIAN_POINT('',(-0.,5.E-02,-0.9)); +#172730 = VECTOR('',#172731,1.); +#172731 = DIRECTION('',(-1.,0.,0.)); +#172732 = ORIENTED_EDGE('',*,*,#172733,.T.); +#172733 = EDGE_CURVE('',#172726,#172734,#172736,.T.); +#172734 = VERTEX_POINT('',#172735); +#172735 = CARTESIAN_POINT('',(0.8,5.E-02,-0.7)); +#172736 = LINE('',#172737,#172738); +#172737 = CARTESIAN_POINT('',(0.8,5.E-02,-0.)); +#172738 = VECTOR('',#172739,1.); +#172739 = DIRECTION('',(0.,0.,1.)); +#172740 = ORIENTED_EDGE('',*,*,#172741,.T.); +#172741 = EDGE_CURVE('',#172734,#172391,#172742,.T.); +#172742 = LINE('',#172743,#172744); +#172743 = CARTESIAN_POINT('',(0.,5.E-02,-0.7)); +#172744 = VECTOR('',#172745,1.); +#172745 = DIRECTION('',(1.,0.,0.)); +#172746 = ORIENTED_EDGE('',*,*,#172390,.F.); +#172747 = ORIENTED_EDGE('',*,*,#172748,.T.); +#172748 = EDGE_CURVE('',#172383,#172749,#172751,.T.); +#172749 = VERTEX_POINT('',#172750); +#172750 = CARTESIAN_POINT('',(0.8,5.E-02,-0.5)); +#172751 = LINE('',#172752,#172753); +#172752 = CARTESIAN_POINT('',(-0.,5.E-02,-0.5)); +#172753 = VECTOR('',#172754,1.); +#172754 = DIRECTION('',(-1.,0.,0.)); +#172755 = ORIENTED_EDGE('',*,*,#172756,.T.); +#172756 = EDGE_CURVE('',#172749,#172757,#172759,.T.); +#172757 = VERTEX_POINT('',#172758); +#172758 = CARTESIAN_POINT('',(0.8,5.E-02,-0.3)); +#172759 = LINE('',#172760,#172761); +#172760 = CARTESIAN_POINT('',(0.8,5.E-02,-0.)); +#172761 = VECTOR('',#172762,1.); +#172762 = DIRECTION('',(0.,0.,1.)); +#172763 = ORIENTED_EDGE('',*,*,#172764,.T.); +#172764 = EDGE_CURVE('',#172757,#172368,#172765,.T.); +#172765 = LINE('',#172766,#172767); +#172766 = CARTESIAN_POINT('',(0.,5.E-02,-0.3)); +#172767 = VECTOR('',#172768,1.); +#172768 = DIRECTION('',(1.,0.,0.)); +#172769 = ORIENTED_EDGE('',*,*,#172367,.F.); +#172770 = ORIENTED_EDGE('',*,*,#172771,.T.); +#172771 = EDGE_CURVE('',#172360,#172772,#172774,.T.); +#172772 = VERTEX_POINT('',#172773); +#172773 = CARTESIAN_POINT('',(0.8,5.E-02,-0.1)); +#172774 = LINE('',#172775,#172776); +#172775 = CARTESIAN_POINT('',(-0.,5.E-02,-0.1)); +#172776 = VECTOR('',#172777,1.); +#172777 = DIRECTION('',(-1.,0.,0.)); +#172778 = ORIENTED_EDGE('',*,*,#172779,.T.); +#172779 = EDGE_CURVE('',#172772,#172780,#172782,.T.); +#172780 = VERTEX_POINT('',#172781); +#172781 = CARTESIAN_POINT('',(0.8,5.E-02,0.1)); +#172782 = LINE('',#172783,#172784); +#172783 = CARTESIAN_POINT('',(0.8,5.E-02,-0.)); +#172784 = VECTOR('',#172785,1.); +#172785 = DIRECTION('',(0.,0.,1.)); +#172786 = ORIENTED_EDGE('',*,*,#172787,.T.); +#172787 = EDGE_CURVE('',#172780,#172345,#172788,.T.); +#172788 = LINE('',#172789,#172790); +#172789 = CARTESIAN_POINT('',(-0.,5.E-02,0.1)); +#172790 = VECTOR('',#172791,1.); +#172791 = DIRECTION('',(1.,0.,0.)); +#172792 = ORIENTED_EDGE('',*,*,#172344,.F.); +#172793 = ORIENTED_EDGE('',*,*,#172794,.T.); +#172794 = EDGE_CURVE('',#172337,#172795,#172797,.T.); +#172795 = VERTEX_POINT('',#172796); +#172796 = CARTESIAN_POINT('',(0.8,5.E-02,0.3)); +#172797 = LINE('',#172798,#172799); +#172798 = CARTESIAN_POINT('',(0.,5.E-02,0.3)); +#172799 = VECTOR('',#172800,1.); +#172800 = DIRECTION('',(-1.,0.,0.)); +#172801 = ORIENTED_EDGE('',*,*,#172802,.T.); +#172802 = EDGE_CURVE('',#172795,#172803,#172805,.T.); +#172803 = VERTEX_POINT('',#172804); +#172804 = CARTESIAN_POINT('',(0.8,5.E-02,0.5)); +#172805 = LINE('',#172806,#172807); +#172806 = CARTESIAN_POINT('',(0.8,5.E-02,-0.)); +#172807 = VECTOR('',#172808,1.); +#172808 = DIRECTION('',(0.,0.,1.)); +#172809 = ORIENTED_EDGE('',*,*,#172810,.T.); +#172810 = EDGE_CURVE('',#172803,#172322,#172811,.T.); +#172811 = LINE('',#172812,#172813); +#172812 = CARTESIAN_POINT('',(-0.,5.E-02,0.5)); +#172813 = VECTOR('',#172814,1.); +#172814 = DIRECTION('',(1.,0.,0.)); +#172815 = ORIENTED_EDGE('',*,*,#172321,.F.); +#172816 = ORIENTED_EDGE('',*,*,#172817,.T.); +#172817 = EDGE_CURVE('',#172314,#172818,#172820,.T.); +#172818 = VERTEX_POINT('',#172819); +#172819 = CARTESIAN_POINT('',(0.8,5.E-02,0.7)); +#172820 = LINE('',#172821,#172822); +#172821 = CARTESIAN_POINT('',(0.,5.E-02,0.7)); +#172822 = VECTOR('',#172823,1.); +#172823 = DIRECTION('',(-1.,0.,0.)); +#172824 = ORIENTED_EDGE('',*,*,#172825,.T.); +#172825 = EDGE_CURVE('',#172818,#172826,#172828,.T.); +#172826 = VERTEX_POINT('',#172827); +#172827 = CARTESIAN_POINT('',(0.8,5.E-02,0.9)); +#172828 = LINE('',#172829,#172830); +#172829 = CARTESIAN_POINT('',(0.8,5.E-02,-0.)); +#172830 = VECTOR('',#172831,1.); +#172831 = DIRECTION('',(0.,0.,1.)); +#172832 = ORIENTED_EDGE('',*,*,#172833,.T.); +#172833 = EDGE_CURVE('',#172826,#172299,#172834,.T.); +#172834 = LINE('',#172835,#172836); +#172835 = CARTESIAN_POINT('',(-0.,5.E-02,0.9)); +#172836 = VECTOR('',#172837,1.); +#172837 = DIRECTION('',(1.,0.,0.)); +#172838 = ORIENTED_EDGE('',*,*,#172296,.F.); +#172839 = ORIENTED_EDGE('',*,*,#172840,.F.); +#172840 = EDGE_CURVE('',#172507,#172297,#172841,.T.); +#172841 = LINE('',#172842,#172843); +#172842 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#172843 = VECTOR('',#172844,1.); +#172844 = DIRECTION('',(1.,0.,0.)); +#172845 = ORIENTED_EDGE('',*,*,#172506,.F.); +#172846 = ORIENTED_EDGE('',*,*,#172847,.T.); +#172847 = EDGE_CURVE('',#172499,#172848,#172850,.T.); +#172848 = VERTEX_POINT('',#172849); +#172849 = CARTESIAN_POINT('',(-0.8,5.E-02,0.9)); +#172850 = LINE('',#172851,#172852); +#172851 = CARTESIAN_POINT('',(-0.,5.E-02,0.9)); +#172852 = VECTOR('',#172853,1.); +#172853 = DIRECTION('',(1.,0.,0.)); +#172854 = ORIENTED_EDGE('',*,*,#172855,.T.); +#172855 = EDGE_CURVE('',#172848,#172856,#172858,.T.); +#172856 = VERTEX_POINT('',#172857); +#172857 = CARTESIAN_POINT('',(-0.8,5.E-02,0.7)); +#172858 = LINE('',#172859,#172860); +#172859 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.)); +#172860 = VECTOR('',#172861,1.); +#172861 = DIRECTION('',(0.,0.,-1.)); +#172862 = ORIENTED_EDGE('',*,*,#172863,.T.); +#172863 = EDGE_CURVE('',#172856,#172484,#172864,.T.); +#172864 = LINE('',#172865,#172866); +#172865 = CARTESIAN_POINT('',(0.,5.E-02,0.7)); +#172866 = VECTOR('',#172867,1.); +#172867 = DIRECTION('',(-1.,0.,0.)); +#172868 = ORIENTED_EDGE('',*,*,#172483,.F.); +#172869 = ORIENTED_EDGE('',*,*,#172870,.T.); +#172870 = EDGE_CURVE('',#172476,#172871,#172873,.T.); +#172871 = VERTEX_POINT('',#172872); +#172872 = CARTESIAN_POINT('',(-0.8,5.E-02,0.5)); +#172873 = LINE('',#172874,#172875); +#172874 = CARTESIAN_POINT('',(-0.,5.E-02,0.5)); +#172875 = VECTOR('',#172876,1.); +#172876 = DIRECTION('',(1.,0.,0.)); +#172877 = ORIENTED_EDGE('',*,*,#172878,.T.); +#172878 = EDGE_CURVE('',#172871,#172879,#172881,.T.); +#172879 = VERTEX_POINT('',#172880); +#172880 = CARTESIAN_POINT('',(-0.8,5.E-02,0.3)); +#172881 = LINE('',#172882,#172883); +#172882 = CARTESIAN_POINT('',(-0.8,5.E-02,-0.)); +#172883 = VECTOR('',#172884,1.); +#172884 = DIRECTION('',(0.,0.,-1.)); +#172885 = ORIENTED_EDGE('',*,*,#172886,.T.); +#172886 = EDGE_CURVE('',#172879,#172461,#172887,.T.); +#172887 = LINE('',#172888,#172889); +#172888 = CARTESIAN_POINT('',(0.,5.E-02,0.3)); +#172889 = VECTOR('',#172890,1.); +#172890 = DIRECTION('',(-1.,0.,0.)); +#172891 = PLANE('',#172892); +#172892 = AXIS2_PLACEMENT_3D('',#172893,#172894,#172895); +#172893 = CARTESIAN_POINT('',(0.,5.E-02,0.)); +#172894 = DIRECTION('',(0.,-1.,0.)); +#172895 = DIRECTION('',(0.,-0.,-1.)); +#172896 = ADVANCED_FACE('',(#172897,#172931,#172965,#172999,#173033), + #173044,.T.); +#172897 = FACE_BOUND('',#172898,.T.); +#172898 = EDGE_LOOP('',(#172899,#172909,#172917,#172925)); +#172899 = ORIENTED_EDGE('',*,*,#172900,.F.); +#172900 = EDGE_CURVE('',#172901,#172903,#172905,.T.); +#172901 = VERTEX_POINT('',#172902); +#172902 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#172903 = VERTEX_POINT('',#172904); +#172904 = CARTESIAN_POINT('',(-0.525,0.1,1.)); +#172905 = LINE('',#172906,#172907); +#172906 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#172907 = VECTOR('',#172908,1.); +#172908 = DIRECTION('',(0.,-1.,0.)); +#172909 = ORIENTED_EDGE('',*,*,#172910,.F.); +#172910 = EDGE_CURVE('',#172911,#172901,#172913,.T.); +#172911 = VERTEX_POINT('',#172912); +#172912 = CARTESIAN_POINT('',(-0.375,0.2,1.)); +#172913 = LINE('',#172914,#172915); +#172914 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#172915 = VECTOR('',#172916,1.); +#172916 = DIRECTION('',(-1.,-1.807003620809E-16,-0.)); +#172917 = ORIENTED_EDGE('',*,*,#172918,.F.); +#172918 = EDGE_CURVE('',#172919,#172911,#172921,.T.); +#172919 = VERTEX_POINT('',#172920); +#172920 = CARTESIAN_POINT('',(-0.375,0.1,1.)); +#172921 = LINE('',#172922,#172923); +#172922 = CARTESIAN_POINT('',(-0.375,0.2,1.)); +#172923 = VECTOR('',#172924,1.); +#172924 = DIRECTION('',(-0.,1.,-0.)); +#172925 = ORIENTED_EDGE('',*,*,#172926,.F.); +#172926 = EDGE_CURVE('',#172903,#172919,#172927,.T.); +#172927 = LINE('',#172928,#172929); +#172928 = CARTESIAN_POINT('',(-0.525,0.1,1.)); +#172929 = VECTOR('',#172930,1.); +#172930 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#172931 = FACE_BOUND('',#172932,.T.); +#172932 = EDGE_LOOP('',(#172933,#172943,#172951,#172959)); +#172933 = ORIENTED_EDGE('',*,*,#172934,.F.); +#172934 = EDGE_CURVE('',#172935,#172937,#172939,.T.); +#172935 = VERTEX_POINT('',#172936); +#172936 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#172937 = VERTEX_POINT('',#172938); +#172938 = CARTESIAN_POINT('',(-0.95,0.1,1.)); +#172939 = LINE('',#172940,#172941); +#172940 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#172941 = VECTOR('',#172942,1.); +#172942 = DIRECTION('',(0.,-1.,0.)); +#172943 = ORIENTED_EDGE('',*,*,#172944,.F.); +#172944 = EDGE_CURVE('',#172945,#172935,#172947,.T.); +#172945 = VERTEX_POINT('',#172946); +#172946 = CARTESIAN_POINT('',(-0.85,0.2,1.)); +#172947 = LINE('',#172948,#172949); +#172948 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#172949 = VECTOR('',#172950,1.); +#172950 = DIRECTION('',(-1.,-0.,-0.)); +#172951 = ORIENTED_EDGE('',*,*,#172952,.F.); +#172952 = EDGE_CURVE('',#172953,#172945,#172955,.T.); +#172953 = VERTEX_POINT('',#172954); +#172954 = CARTESIAN_POINT('',(-0.85,0.1,1.)); +#172955 = LINE('',#172956,#172957); +#172956 = CARTESIAN_POINT('',(-0.85,0.2,1.)); +#172957 = VECTOR('',#172958,1.); +#172958 = DIRECTION('',(-0.,1.,-0.)); +#172959 = ORIENTED_EDGE('',*,*,#172960,.F.); +#172960 = EDGE_CURVE('',#172937,#172953,#172961,.T.); +#172961 = LINE('',#172962,#172963); +#172962 = CARTESIAN_POINT('',(-0.95,0.1,1.)); +#172963 = VECTOR('',#172964,1.); +#172964 = DIRECTION('',(1.,0.,0.)); +#172965 = FACE_BOUND('',#172966,.T.); +#172966 = EDGE_LOOP('',(#172967,#172977,#172985,#172993)); +#172967 = ORIENTED_EDGE('',*,*,#172968,.F.); +#172968 = EDGE_CURVE('',#172969,#172971,#172973,.T.); +#172969 = VERTEX_POINT('',#172970); +#172970 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#172971 = VERTEX_POINT('',#172972); +#172972 = CARTESIAN_POINT('',(0.85,0.2,1.)); +#172973 = LINE('',#172974,#172975); +#172974 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#172975 = VECTOR('',#172976,1.); +#172976 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#172977 = ORIENTED_EDGE('',*,*,#172978,.F.); +#172978 = EDGE_CURVE('',#172979,#172969,#172981,.T.); +#172979 = VERTEX_POINT('',#172980); +#172980 = CARTESIAN_POINT('',(0.95,1.E-01,1.)); +#172981 = LINE('',#172982,#172983); +#172982 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#172983 = VECTOR('',#172984,1.); +#172984 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#172985 = ORIENTED_EDGE('',*,*,#172986,.F.); +#172986 = EDGE_CURVE('',#172987,#172979,#172989,.T.); +#172987 = VERTEX_POINT('',#172988); +#172988 = CARTESIAN_POINT('',(0.85,1.E-01,1.)); +#172989 = LINE('',#172990,#172991); +#172990 = CARTESIAN_POINT('',(0.95,1.E-01,1.)); +#172991 = VECTOR('',#172992,1.); +#172992 = DIRECTION('',(1.,-1.084202172486E-15,-0.)); +#172993 = ORIENTED_EDGE('',*,*,#172994,.F.); +#172994 = EDGE_CURVE('',#172971,#172987,#172995,.T.); +#172995 = LINE('',#172996,#172997); +#172996 = CARTESIAN_POINT('',(0.85,0.2,1.)); +#172997 = VECTOR('',#172998,1.); +#172998 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#172999 = FACE_BOUND('',#173000,.T.); +#173000 = EDGE_LOOP('',(#173001,#173011,#173019,#173027)); +#173001 = ORIENTED_EDGE('',*,*,#173002,.F.); +#173002 = EDGE_CURVE('',#173003,#173005,#173007,.T.); +#173003 = VERTEX_POINT('',#173004); +#173004 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#173005 = VERTEX_POINT('',#173006); +#173006 = CARTESIAN_POINT('',(0.375,0.2,1.)); +#173007 = LINE('',#173008,#173009); +#173008 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#173009 = VECTOR('',#173010,1.); +#173010 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#173011 = ORIENTED_EDGE('',*,*,#173012,.F.); +#173012 = EDGE_CURVE('',#173013,#173003,#173015,.T.); +#173013 = VERTEX_POINT('',#173014); +#173014 = CARTESIAN_POINT('',(0.525,1.E-01,1.)); +#173015 = LINE('',#173016,#173017); +#173016 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#173017 = VECTOR('',#173018,1.); +#173018 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#173019 = ORIENTED_EDGE('',*,*,#173020,.F.); +#173020 = EDGE_CURVE('',#173021,#173013,#173023,.T.); +#173021 = VERTEX_POINT('',#173022); +#173022 = CARTESIAN_POINT('',(0.375,1.E-01,1.)); +#173023 = LINE('',#173024,#173025); +#173024 = CARTESIAN_POINT('',(0.525,1.E-01,1.)); +#173025 = VECTOR('',#173026,1.); +#173026 = DIRECTION('',(1.,-1.264902534566E-15,-0.)); +#173027 = ORIENTED_EDGE('',*,*,#173028,.F.); +#173028 = EDGE_CURVE('',#173005,#173021,#173029,.T.); +#173029 = LINE('',#173030,#173031); +#173030 = CARTESIAN_POINT('',(0.375,0.2,1.)); +#173031 = VECTOR('',#173032,1.); +#173032 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#173033 = FACE_BOUND('',#173034,.T.); +#173034 = EDGE_LOOP('',(#173035,#173041,#173042,#173043)); +#173035 = ORIENTED_EDGE('',*,*,#173036,.F.); +#173036 = EDGE_CURVE('',#172515,#172430,#173037,.T.); +#173037 = LINE('',#173038,#173039); +#173038 = CARTESIAN_POINT('',(-1.1,0.8,1.)); +#173039 = VECTOR('',#173040,1.); +#173040 = DIRECTION('',(1.,0.,0.)); +#173041 = ORIENTED_EDGE('',*,*,#172514,.F.); +#173042 = ORIENTED_EDGE('',*,*,#172840,.T.); +#173043 = ORIENTED_EDGE('',*,*,#172437,.T.); +#173044 = PLANE('',#173045); +#173045 = AXIS2_PLACEMENT_3D('',#173046,#173047,#173048); +#173046 = CARTESIAN_POINT('',(-1.1,5.E-02,1.)); +#173047 = DIRECTION('',(0.,0.,1.)); +#173048 = DIRECTION('',(1.,0.,-0.)); +#173049 = ADVANCED_FACE('',(#173050,#173084,#173118,#173152,#173186), + #173197,.T.); +#173050 = FACE_BOUND('',#173051,.T.); +#173051 = EDGE_LOOP('',(#173052,#173062,#173070,#173078)); +#173052 = ORIENTED_EDGE('',*,*,#173053,.T.); +#173053 = EDGE_CURVE('',#173054,#173056,#173058,.T.); +#173054 = VERTEX_POINT('',#173055); +#173055 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#173056 = VERTEX_POINT('',#173057); +#173057 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#173058 = LINE('',#173059,#173060); +#173059 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#173060 = VECTOR('',#173061,1.); +#173061 = DIRECTION('',(0.,-1.,0.)); +#173062 = ORIENTED_EDGE('',*,*,#173063,.T.); +#173063 = EDGE_CURVE('',#173056,#173064,#173066,.T.); +#173064 = VERTEX_POINT('',#173065); +#173065 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#173066 = LINE('',#173067,#173068); +#173067 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#173068 = VECTOR('',#173069,1.); +#173069 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#173070 = ORIENTED_EDGE('',*,*,#173071,.T.); +#173071 = EDGE_CURVE('',#173064,#173072,#173074,.T.); +#173072 = VERTEX_POINT('',#173073); +#173073 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#173074 = LINE('',#173075,#173076); +#173075 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#173076 = VECTOR('',#173077,1.); +#173077 = DIRECTION('',(-0.,1.,-0.)); +#173078 = ORIENTED_EDGE('',*,*,#173079,.T.); +#173079 = EDGE_CURVE('',#173072,#173054,#173080,.T.); +#173080 = LINE('',#173081,#173082); +#173081 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#173082 = VECTOR('',#173083,1.); +#173083 = DIRECTION('',(-1.,-1.807003620809E-16,-0.)); +#173084 = FACE_BOUND('',#173085,.T.); +#173085 = EDGE_LOOP('',(#173086,#173096,#173104,#173112)); +#173086 = ORIENTED_EDGE('',*,*,#173087,.T.); +#173087 = EDGE_CURVE('',#173088,#173090,#173092,.T.); +#173088 = VERTEX_POINT('',#173089); +#173089 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#173090 = VERTEX_POINT('',#173091); +#173091 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#173092 = LINE('',#173093,#173094); +#173093 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#173094 = VECTOR('',#173095,1.); +#173095 = DIRECTION('',(0.,-1.,0.)); +#173096 = ORIENTED_EDGE('',*,*,#173097,.T.); +#173097 = EDGE_CURVE('',#173090,#173098,#173100,.T.); +#173098 = VERTEX_POINT('',#173099); +#173099 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#173100 = LINE('',#173101,#173102); +#173101 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#173102 = VECTOR('',#173103,1.); +#173103 = DIRECTION('',(1.,0.,0.)); +#173104 = ORIENTED_EDGE('',*,*,#173105,.T.); +#173105 = EDGE_CURVE('',#173098,#173106,#173108,.T.); +#173106 = VERTEX_POINT('',#173107); +#173107 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#173108 = LINE('',#173109,#173110); +#173109 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#173110 = VECTOR('',#173111,1.); +#173111 = DIRECTION('',(-0.,1.,-0.)); +#173112 = ORIENTED_EDGE('',*,*,#173113,.T.); +#173113 = EDGE_CURVE('',#173106,#173088,#173114,.T.); +#173114 = LINE('',#173115,#173116); +#173115 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#173116 = VECTOR('',#173117,1.); +#173117 = DIRECTION('',(-1.,-0.,-0.)); +#173118 = FACE_BOUND('',#173119,.T.); +#173119 = EDGE_LOOP('',(#173120,#173130,#173138,#173146)); +#173120 = ORIENTED_EDGE('',*,*,#173121,.T.); +#173121 = EDGE_CURVE('',#173122,#173124,#173126,.T.); +#173122 = VERTEX_POINT('',#173123); +#173123 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#173124 = VERTEX_POINT('',#173125); +#173125 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#173126 = LINE('',#173127,#173128); +#173127 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#173128 = VECTOR('',#173129,1.); +#173129 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#173130 = ORIENTED_EDGE('',*,*,#173131,.T.); +#173131 = EDGE_CURVE('',#173124,#173132,#173134,.T.); +#173132 = VERTEX_POINT('',#173133); +#173133 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#173134 = LINE('',#173135,#173136); +#173135 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#173136 = VECTOR('',#173137,1.); +#173137 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#173138 = ORIENTED_EDGE('',*,*,#173139,.T.); +#173139 = EDGE_CURVE('',#173132,#173140,#173142,.T.); +#173140 = VERTEX_POINT('',#173141); +#173141 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#173142 = LINE('',#173143,#173144); +#173143 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#173144 = VECTOR('',#173145,1.); +#173145 = DIRECTION('',(1.,-1.084202172486E-15,-0.)); +#173146 = ORIENTED_EDGE('',*,*,#173147,.T.); +#173147 = EDGE_CURVE('',#173140,#173122,#173148,.T.); +#173148 = LINE('',#173149,#173150); +#173149 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#173150 = VECTOR('',#173151,1.); +#173151 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#173152 = FACE_BOUND('',#173153,.T.); +#173153 = EDGE_LOOP('',(#173154,#173164,#173172,#173180)); +#173154 = ORIENTED_EDGE('',*,*,#173155,.T.); +#173155 = EDGE_CURVE('',#173156,#173158,#173160,.T.); +#173156 = VERTEX_POINT('',#173157); +#173157 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#173158 = VERTEX_POINT('',#173159); +#173159 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#173160 = LINE('',#173161,#173162); +#173161 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#173162 = VECTOR('',#173163,1.); +#173163 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#173164 = ORIENTED_EDGE('',*,*,#173165,.T.); +#173165 = EDGE_CURVE('',#173158,#173166,#173168,.T.); +#173166 = VERTEX_POINT('',#173167); +#173167 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#173168 = LINE('',#173169,#173170); +#173169 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#173170 = VECTOR('',#173171,1.); +#173171 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#173172 = ORIENTED_EDGE('',*,*,#173173,.T.); +#173173 = EDGE_CURVE('',#173166,#173174,#173176,.T.); +#173174 = VERTEX_POINT('',#173175); +#173175 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#173176 = LINE('',#173177,#173178); +#173177 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#173178 = VECTOR('',#173179,1.); +#173179 = DIRECTION('',(1.,-1.264902534566E-15,-0.)); +#173180 = ORIENTED_EDGE('',*,*,#173181,.T.); +#173181 = EDGE_CURVE('',#173174,#173156,#173182,.T.); +#173182 = LINE('',#173183,#173184); +#173183 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#173184 = VECTOR('',#173185,1.); +#173185 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#173186 = FACE_BOUND('',#173187,.T.); +#173187 = EDGE_LOOP('',(#173188,#173194,#173195,#173196)); +#173188 = ORIENTED_EDGE('',*,*,#173189,.F.); +#173189 = EDGE_CURVE('',#172422,#172523,#173190,.T.); +#173190 = LINE('',#173191,#173192); +#173191 = CARTESIAN_POINT('',(-1.1,0.8,-1.)); +#173192 = VECTOR('',#173193,1.); +#173193 = DIRECTION('',(-1.,-0.,-0.)); +#173194 = ORIENTED_EDGE('',*,*,#172421,.F.); +#173195 = ORIENTED_EDGE('',*,*,#172718,.T.); +#173196 = ORIENTED_EDGE('',*,*,#172530,.T.); +#173197 = PLANE('',#173198); +#173198 = AXIS2_PLACEMENT_3D('',#173199,#173200,#173201); +#173199 = CARTESIAN_POINT('',(-1.1,5.E-02,-1.)); +#173200 = DIRECTION('',(0.,0.,-1.)); +#173201 = DIRECTION('',(-1.,0.,-0.)); +#173202 = ADVANCED_FACE('',(#173203,#173213),#173219,.F.); +#173203 = FACE_BOUND('',#173204,.T.); +#173204 = EDGE_LOOP('',(#173205,#173212)); +#173205 = ORIENTED_EDGE('',*,*,#173206,.F.); +#173206 = EDGE_CURVE('',#171809,#171817,#173207,.T.); +#173207 = CIRCLE('',#173208,0.1); +#173208 = AXIS2_PLACEMENT_3D('',#173209,#173210,#173211); +#173209 = CARTESIAN_POINT('',(-0.85,0.8,-0.75)); +#173210 = DIRECTION('',(0.,1.,0.)); +#173211 = DIRECTION('',(0.,-0.,1.)); +#173212 = ORIENTED_EDGE('',*,*,#171816,.F.); +#173213 = FACE_BOUND('',#173214,.T.); +#173214 = EDGE_LOOP('',(#173215,#173216,#173217,#173218)); +#173215 = ORIENTED_EDGE('',*,*,#172429,.T.); +#173216 = ORIENTED_EDGE('',*,*,#173189,.T.); +#173217 = ORIENTED_EDGE('',*,*,#172522,.T.); +#173218 = ORIENTED_EDGE('',*,*,#173036,.T.); +#173219 = PLANE('',#173220); +#173220 = AXIS2_PLACEMENT_3D('',#173221,#173222,#173223); +#173221 = CARTESIAN_POINT('',(0.,0.8,0.)); +#173222 = DIRECTION('',(0.,-1.,0.)); +#173223 = DIRECTION('',(0.,-0.,-1.)); +#173224 = ADVANCED_FACE('',(#173225),#173237,.F.); +#173225 = FACE_BOUND('',#173226,.F.); +#173226 = EDGE_LOOP('',(#173227,#173228,#173229,#173236)); +#173227 = ORIENTED_EDGE('',*,*,#173206,.F.); +#173228 = ORIENTED_EDGE('',*,*,#171806,.F.); +#173229 = ORIENTED_EDGE('',*,*,#173230,.T.); +#173230 = EDGE_CURVE('',#171807,#171826,#173231,.T.); +#173231 = CIRCLE('',#173232,0.1); +#173232 = AXIS2_PLACEMENT_3D('',#173233,#173234,#173235); +#173233 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#173234 = DIRECTION('',(0.,1.,0.)); +#173235 = DIRECTION('',(0.,-0.,1.)); +#173236 = ORIENTED_EDGE('',*,*,#171825,.T.); +#173237 = CYLINDRICAL_SURFACE('',#173238,0.1); +#173238 = AXIS2_PLACEMENT_3D('',#173239,#173240,#173241); +#173239 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#173240 = DIRECTION('',(-0.,1.,-0.)); +#173241 = DIRECTION('',(0.,0.,1.)); +#173242 = ADVANCED_FACE('',(#173243),#173247,.T.); +#173243 = FACE_BOUND('',#173244,.T.); +#173244 = EDGE_LOOP('',(#173245,#173246)); +#173245 = ORIENTED_EDGE('',*,*,#173230,.T.); +#173246 = ORIENTED_EDGE('',*,*,#171833,.T.); +#173247 = PLANE('',#173248); +#173248 = AXIS2_PLACEMENT_3D('',#173249,#173250,#173251); +#173249 = CARTESIAN_POINT('',(-0.85,0.75,-0.75)); +#173250 = DIRECTION('',(0.,1.,0.)); +#173251 = DIRECTION('',(0.,-0.,1.)); +#173252 = ADVANCED_FACE('',(#173253),#173278,.T.); +#173253 = FACE_BOUND('',#173254,.T.); +#173254 = EDGE_LOOP('',(#173255,#173263,#173271,#173277)); +#173255 = ORIENTED_EDGE('',*,*,#173256,.F.); +#173256 = EDGE_CURVE('',#173257,#172609,#173259,.T.); +#173257 = VERTEX_POINT('',#173258); +#173258 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#173259 = LINE('',#173260,#173261); +#173260 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#173261 = VECTOR('',#173262,1.); +#173262 = DIRECTION('',(0.,-1.,0.)); +#173263 = ORIENTED_EDGE('',*,*,#173264,.T.); +#173264 = EDGE_CURVE('',#173257,#173265,#173267,.T.); +#173265 = VERTEX_POINT('',#173266); +#173266 = CARTESIAN_POINT('',(0.45,0.1,-0.75)); +#173267 = LINE('',#173268,#173269); +#173268 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#173269 = VECTOR('',#173270,1.); +#173270 = DIRECTION('',(0.,0.,-1.)); +#173271 = ORIENTED_EDGE('',*,*,#173272,.T.); +#173272 = EDGE_CURVE('',#173265,#172617,#173273,.T.); +#173273 = LINE('',#173274,#173275); +#173274 = CARTESIAN_POINT('',(0.45,0.1,-0.75)); +#173275 = VECTOR('',#173276,1.); +#173276 = DIRECTION('',(0.,-1.,0.)); +#173277 = ORIENTED_EDGE('',*,*,#172616,.F.); +#173278 = PLANE('',#173279); +#173279 = AXIS2_PLACEMENT_3D('',#173280,#173281,#173282); +#173280 = CARTESIAN_POINT('',(0.45,0.1,0.75)); +#173281 = DIRECTION('',(-1.,0.,-0.)); +#173282 = DIRECTION('',(0.,0.,1.)); +#173283 = ADVANCED_FACE('',(#173284),#173301,.T.); +#173284 = FACE_BOUND('',#173285,.T.); +#173285 = EDGE_LOOP('',(#173286,#173287,#173293,#173294,#173300)); +#173286 = ORIENTED_EDGE('',*,*,#173272,.F.); +#173287 = ORIENTED_EDGE('',*,*,#173288,.T.); +#173288 = EDGE_CURVE('',#173265,#171867,#173289,.T.); +#173289 = LINE('',#173290,#173291); +#173290 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#173291 = VECTOR('',#173292,1.); +#173292 = DIRECTION('',(-1.,-0.,-0.)); +#173293 = ORIENTED_EDGE('',*,*,#171866,.T.); +#173294 = ORIENTED_EDGE('',*,*,#173295,.T.); +#173295 = EDGE_CURVE('',#171859,#172625,#173296,.T.); +#173296 = LINE('',#173297,#173298); +#173297 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#173298 = VECTOR('',#173299,1.); +#173299 = DIRECTION('',(0.,-1.,0.)); +#173300 = ORIENTED_EDGE('',*,*,#172624,.F.); +#173301 = PLANE('',#173302); +#173302 = AXIS2_PLACEMENT_3D('',#173303,#173304,#173305); +#173303 = CARTESIAN_POINT('',(-0.225,0.1,-0.75)); +#173304 = DIRECTION('',(-0.,0.,1.)); +#173305 = DIRECTION('',(1.,0.,0.)); +#173306 = ADVANCED_FACE('',(#173307),#173326,.T.); +#173307 = FACE_BOUND('',#173308,.T.); +#173308 = EDGE_LOOP('',(#173309,#173310,#173311,#173319,#173325)); +#173309 = ORIENTED_EDGE('',*,*,#173295,.F.); +#173310 = ORIENTED_EDGE('',*,*,#171858,.T.); +#173311 = ORIENTED_EDGE('',*,*,#173312,.T.); +#173312 = EDGE_CURVE('',#171849,#173313,#173315,.T.); +#173313 = VERTEX_POINT('',#173314); +#173314 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#173315 = LINE('',#173316,#173317); +#173316 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#173317 = VECTOR('',#173318,1.); +#173318 = DIRECTION('',(-0.707106781187,-0.,0.707106781187)); +#173319 = ORIENTED_EDGE('',*,*,#173320,.T.); +#173320 = EDGE_CURVE('',#173313,#172633,#173321,.T.); +#173321 = LINE('',#173322,#173323); +#173322 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#173323 = VECTOR('',#173324,1.); +#173324 = DIRECTION('',(0.,-1.,0.)); +#173325 = ORIENTED_EDGE('',*,*,#172632,.F.); +#173326 = PLANE('',#173327); +#173327 = AXIS2_PLACEMENT_3D('',#173328,#173329,#173330); +#173328 = CARTESIAN_POINT('',(-0.45,0.1,-0.525)); +#173329 = DIRECTION('',(0.707106781187,0.,0.707106781187)); +#173330 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); +#173331 = ADVANCED_FACE('',(#173332),#173350,.T.); +#173332 = FACE_BOUND('',#173333,.T.); +#173333 = EDGE_LOOP('',(#173334,#173335,#173343,#173349)); +#173334 = ORIENTED_EDGE('',*,*,#173320,.F.); +#173335 = ORIENTED_EDGE('',*,*,#173336,.T.); +#173336 = EDGE_CURVE('',#173313,#173337,#173339,.T.); +#173337 = VERTEX_POINT('',#173338); +#173338 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173339 = LINE('',#173340,#173341); +#173340 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173341 = VECTOR('',#173342,1.); +#173342 = DIRECTION('',(-0.,-0.,1.)); +#173343 = ORIENTED_EDGE('',*,*,#173344,.T.); +#173344 = EDGE_CURVE('',#173337,#172607,#173345,.T.); +#173345 = LINE('',#173346,#173347); +#173346 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173347 = VECTOR('',#173348,1.); +#173348 = DIRECTION('',(0.,-1.,0.)); +#173349 = ORIENTED_EDGE('',*,*,#172640,.F.); +#173350 = PLANE('',#173351); +#173351 = AXIS2_PLACEMENT_3D('',#173352,#173353,#173354); +#173352 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173353 = DIRECTION('',(1.,0.,0.)); +#173354 = DIRECTION('',(0.,0.,-1.)); +#173355 = ADVANCED_FACE('',(#173356),#173374,.T.); +#173356 = FACE_BOUND('',#173357,.T.); +#173357 = EDGE_LOOP('',(#173358,#173359,#173365,#173366,#173372,#173373) + ); +#173358 = ORIENTED_EDGE('',*,*,#173344,.F.); +#173359 = ORIENTED_EDGE('',*,*,#173360,.T.); +#173360 = EDGE_CURVE('',#173337,#171851,#173361,.T.); +#173361 = LINE('',#173362,#173363); +#173362 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173363 = VECTOR('',#173364,1.); +#173364 = DIRECTION('',(1.,0.,0.)); +#173365 = ORIENTED_EDGE('',*,*,#171882,.T.); +#173366 = ORIENTED_EDGE('',*,*,#173367,.T.); +#173367 = EDGE_CURVE('',#171875,#173257,#173368,.T.); +#173368 = LINE('',#173369,#173370); +#173369 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173370 = VECTOR('',#173371,1.); +#173371 = DIRECTION('',(1.,0.,0.)); +#173372 = ORIENTED_EDGE('',*,*,#173256,.T.); +#173373 = ORIENTED_EDGE('',*,*,#172606,.F.); +#173374 = PLANE('',#173375); +#173375 = AXIS2_PLACEMENT_3D('',#173376,#173377,#173378); +#173376 = CARTESIAN_POINT('',(-0.45,0.1,0.75)); +#173377 = DIRECTION('',(0.,0.,-1.)); +#173378 = DIRECTION('',(-1.,0.,-0.)); +#173379 = ADVANCED_FACE('',(#173380),#173407,.T.); +#173380 = FACE_BOUND('',#173381,.T.); +#173381 = EDGE_LOOP('',(#173382,#173383,#173384,#173392,#173400,#173406) + ); +#173382 = ORIENTED_EDGE('',*,*,#172498,.F.); +#173383 = ORIENTED_EDGE('',*,*,#171914,.T.); +#173384 = ORIENTED_EDGE('',*,*,#173385,.F.); +#173385 = EDGE_CURVE('',#173386,#171907,#173388,.T.); +#173386 = VERTEX_POINT('',#173387); +#173387 = CARTESIAN_POINT('',(-0.85,0.1,0.9)); +#173388 = LINE('',#173389,#173390); +#173389 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#173390 = VECTOR('',#173391,1.); +#173391 = DIRECTION('',(-1.,0.,0.)); +#173392 = ORIENTED_EDGE('',*,*,#173393,.T.); +#173393 = EDGE_CURVE('',#173386,#173394,#173396,.T.); +#173394 = VERTEX_POINT('',#173395); +#173395 = CARTESIAN_POINT('',(-0.8,0.1,0.9)); +#173396 = LINE('',#173397,#173398); +#173397 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#173398 = VECTOR('',#173399,1.); +#173399 = DIRECTION('',(1.,0.,0.)); +#173400 = ORIENTED_EDGE('',*,*,#173401,.T.); +#173401 = EDGE_CURVE('',#173394,#172848,#173402,.T.); +#173402 = LINE('',#173403,#173404); +#173403 = CARTESIAN_POINT('',(-0.8,0.1,0.9)); +#173404 = VECTOR('',#173405,1.); +#173405 = DIRECTION('',(0.,-1.,0.)); +#173406 = ORIENTED_EDGE('',*,*,#172847,.F.); +#173407 = PLANE('',#173408); +#173408 = AXIS2_PLACEMENT_3D('',#173409,#173410,#173411); +#173409 = CARTESIAN_POINT('',(-1.1,0.1,0.9)); +#173410 = DIRECTION('',(0.,0.,-1.)); +#173411 = DIRECTION('',(-1.,0.,-0.)); +#173412 = ADVANCED_FACE('',(#173413),#173431,.T.); +#173413 = FACE_BOUND('',#173414,.T.); +#173414 = EDGE_LOOP('',(#173415,#173416,#173424,#173430)); +#173415 = ORIENTED_EDGE('',*,*,#173401,.F.); +#173416 = ORIENTED_EDGE('',*,*,#173417,.T.); +#173417 = EDGE_CURVE('',#173394,#173418,#173420,.T.); +#173418 = VERTEX_POINT('',#173419); +#173419 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#173420 = LINE('',#173421,#173422); +#173421 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#173422 = VECTOR('',#173423,1.); +#173423 = DIRECTION('',(-0.,-0.,-1.)); +#173424 = ORIENTED_EDGE('',*,*,#173425,.T.); +#173425 = EDGE_CURVE('',#173418,#172856,#173426,.T.); +#173426 = LINE('',#173427,#173428); +#173427 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#173428 = VECTOR('',#173429,1.); +#173429 = DIRECTION('',(0.,-1.,0.)); +#173430 = ORIENTED_EDGE('',*,*,#172855,.F.); +#173431 = PLANE('',#173432); +#173432 = AXIS2_PLACEMENT_3D('',#173433,#173434,#173435); +#173433 = CARTESIAN_POINT('',(-0.8,0.1,0.7)); +#173434 = DIRECTION('',(-1.,0.,0.)); +#173435 = DIRECTION('',(0.,0.,1.)); +#173436 = ADVANCED_FACE('',(#173437),#173457,.T.); +#173437 = FACE_BOUND('',#173438,.T.); +#173438 = EDGE_LOOP('',(#173439,#173440,#173448,#173454,#173455,#173456) + ); +#173439 = ORIENTED_EDGE('',*,*,#173425,.F.); +#173440 = ORIENTED_EDGE('',*,*,#173441,.T.); +#173441 = EDGE_CURVE('',#173418,#173442,#173444,.T.); +#173442 = VERTEX_POINT('',#173443); +#173443 = CARTESIAN_POINT('',(-0.85,0.1,0.7)); +#173444 = LINE('',#173445,#173446); +#173445 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#173446 = VECTOR('',#173447,1.); +#173447 = DIRECTION('',(-1.,-0.,-0.)); +#173448 = ORIENTED_EDGE('',*,*,#173449,.F.); +#173449 = EDGE_CURVE('',#171897,#173442,#173450,.T.); +#173450 = LINE('',#173451,#173452); +#173451 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#173452 = VECTOR('',#173453,1.); +#173453 = DIRECTION('',(1.,0.,0.)); +#173454 = ORIENTED_EDGE('',*,*,#171896,.T.); +#173455 = ORIENTED_EDGE('',*,*,#172491,.T.); +#173456 = ORIENTED_EDGE('',*,*,#172863,.F.); +#173457 = PLANE('',#173458); +#173458 = AXIS2_PLACEMENT_3D('',#173459,#173460,#173461); +#173459 = CARTESIAN_POINT('',(-1.1,0.1,0.7)); +#173460 = DIRECTION('',(-0.,0.,1.)); +#173461 = DIRECTION('',(1.,0.,0.)); +#173462 = ADVANCED_FACE('',(#173463),#173474,.F.); +#173463 = FACE_BOUND('',#173464,.T.); +#173464 = EDGE_LOOP('',(#173465,#173466,#173472,#173473)); +#173465 = ORIENTED_EDGE('',*,*,#173393,.F.); +#173466 = ORIENTED_EDGE('',*,*,#173467,.F.); +#173467 = EDGE_CURVE('',#173442,#173386,#173468,.T.); +#173468 = LINE('',#173469,#173470); +#173469 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#173470 = VECTOR('',#173471,1.); +#173471 = DIRECTION('',(-0.,-0.,1.)); +#173472 = ORIENTED_EDGE('',*,*,#173441,.F.); +#173473 = ORIENTED_EDGE('',*,*,#173417,.F.); +#173474 = PLANE('',#173475); +#173475 = AXIS2_PLACEMENT_3D('',#173476,#173477,#173478); +#173476 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173477 = DIRECTION('',(0.,1.,0.)); +#173478 = DIRECTION('',(0.,-0.,1.)); +#173479 = ADVANCED_FACE('',(#173480),#173507,.T.); +#173480 = FACE_BOUND('',#173481,.T.); +#173481 = EDGE_LOOP('',(#173482,#173483,#173484,#173492,#173500,#173506) + ); +#173482 = ORIENTED_EDGE('',*,*,#172475,.F.); +#173483 = ORIENTED_EDGE('',*,*,#171954,.T.); +#173484 = ORIENTED_EDGE('',*,*,#173485,.F.); +#173485 = EDGE_CURVE('',#173486,#171947,#173488,.T.); +#173486 = VERTEX_POINT('',#173487); +#173487 = CARTESIAN_POINT('',(-0.85,0.1,0.5)); +#173488 = LINE('',#173489,#173490); +#173489 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#173490 = VECTOR('',#173491,1.); +#173491 = DIRECTION('',(-1.,0.,0.)); +#173492 = ORIENTED_EDGE('',*,*,#173493,.T.); +#173493 = EDGE_CURVE('',#173486,#173494,#173496,.T.); +#173494 = VERTEX_POINT('',#173495); +#173495 = CARTESIAN_POINT('',(-0.8,0.1,0.5)); +#173496 = LINE('',#173497,#173498); +#173497 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#173498 = VECTOR('',#173499,1.); +#173499 = DIRECTION('',(1.,0.,0.)); +#173500 = ORIENTED_EDGE('',*,*,#173501,.T.); +#173501 = EDGE_CURVE('',#173494,#172871,#173502,.T.); +#173502 = LINE('',#173503,#173504); +#173503 = CARTESIAN_POINT('',(-0.8,0.1,0.5)); +#173504 = VECTOR('',#173505,1.); +#173505 = DIRECTION('',(0.,-1.,0.)); +#173506 = ORIENTED_EDGE('',*,*,#172870,.F.); +#173507 = PLANE('',#173508); +#173508 = AXIS2_PLACEMENT_3D('',#173509,#173510,#173511); +#173509 = CARTESIAN_POINT('',(-1.1,0.1,0.5)); +#173510 = DIRECTION('',(0.,0.,-1.)); +#173511 = DIRECTION('',(-1.,0.,-0.)); +#173512 = ADVANCED_FACE('',(#173513),#173531,.T.); +#173513 = FACE_BOUND('',#173514,.T.); +#173514 = EDGE_LOOP('',(#173515,#173516,#173524,#173530)); +#173515 = ORIENTED_EDGE('',*,*,#173501,.F.); +#173516 = ORIENTED_EDGE('',*,*,#173517,.T.); +#173517 = EDGE_CURVE('',#173494,#173518,#173520,.T.); +#173518 = VERTEX_POINT('',#173519); +#173519 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#173520 = LINE('',#173521,#173522); +#173521 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#173522 = VECTOR('',#173523,1.); +#173523 = DIRECTION('',(-0.,-0.,-1.)); +#173524 = ORIENTED_EDGE('',*,*,#173525,.T.); +#173525 = EDGE_CURVE('',#173518,#172879,#173526,.T.); +#173526 = LINE('',#173527,#173528); +#173527 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#173528 = VECTOR('',#173529,1.); +#173529 = DIRECTION('',(0.,-1.,0.)); +#173530 = ORIENTED_EDGE('',*,*,#172878,.F.); +#173531 = PLANE('',#173532); +#173532 = AXIS2_PLACEMENT_3D('',#173533,#173534,#173535); +#173533 = CARTESIAN_POINT('',(-0.8,0.1,0.3)); +#173534 = DIRECTION('',(-1.,0.,0.)); +#173535 = DIRECTION('',(0.,0.,1.)); +#173536 = ADVANCED_FACE('',(#173537),#173557,.T.); +#173537 = FACE_BOUND('',#173538,.T.); +#173538 = EDGE_LOOP('',(#173539,#173540,#173548,#173554,#173555,#173556) + ); +#173539 = ORIENTED_EDGE('',*,*,#173525,.F.); +#173540 = ORIENTED_EDGE('',*,*,#173541,.T.); +#173541 = EDGE_CURVE('',#173518,#173542,#173544,.T.); +#173542 = VERTEX_POINT('',#173543); +#173543 = CARTESIAN_POINT('',(-0.85,0.1,0.3)); +#173544 = LINE('',#173545,#173546); +#173545 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#173546 = VECTOR('',#173547,1.); +#173547 = DIRECTION('',(-1.,-0.,-0.)); +#173548 = ORIENTED_EDGE('',*,*,#173549,.F.); +#173549 = EDGE_CURVE('',#171937,#173542,#173550,.T.); +#173550 = LINE('',#173551,#173552); +#173551 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#173552 = VECTOR('',#173553,1.); +#173553 = DIRECTION('',(1.,0.,0.)); +#173554 = ORIENTED_EDGE('',*,*,#171936,.T.); +#173555 = ORIENTED_EDGE('',*,*,#172468,.T.); +#173556 = ORIENTED_EDGE('',*,*,#172886,.F.); +#173557 = PLANE('',#173558); +#173558 = AXIS2_PLACEMENT_3D('',#173559,#173560,#173561); +#173559 = CARTESIAN_POINT('',(-1.1,0.1,0.3)); +#173560 = DIRECTION('',(-0.,0.,1.)); +#173561 = DIRECTION('',(1.,0.,0.)); +#173562 = ADVANCED_FACE('',(#173563),#173574,.F.); +#173563 = FACE_BOUND('',#173564,.T.); +#173564 = EDGE_LOOP('',(#173565,#173566,#173572,#173573)); +#173565 = ORIENTED_EDGE('',*,*,#173493,.F.); +#173566 = ORIENTED_EDGE('',*,*,#173567,.F.); +#173567 = EDGE_CURVE('',#173542,#173486,#173568,.T.); +#173568 = LINE('',#173569,#173570); +#173569 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#173570 = VECTOR('',#173571,1.); +#173571 = DIRECTION('',(-0.,-0.,1.)); +#173572 = ORIENTED_EDGE('',*,*,#173541,.F.); +#173573 = ORIENTED_EDGE('',*,*,#173517,.F.); +#173574 = PLANE('',#173575); +#173575 = AXIS2_PLACEMENT_3D('',#173576,#173577,#173578); +#173576 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173577 = DIRECTION('',(0.,1.,0.)); +#173578 = DIRECTION('',(0.,-0.,1.)); +#173579 = ADVANCED_FACE('',(#173580),#173607,.T.); +#173580 = FACE_BOUND('',#173581,.T.); +#173581 = EDGE_LOOP('',(#173582,#173583,#173584,#173592,#173600,#173606) + ); +#173582 = ORIENTED_EDGE('',*,*,#172553,.F.); +#173583 = ORIENTED_EDGE('',*,*,#171994,.T.); +#173584 = ORIENTED_EDGE('',*,*,#173585,.F.); +#173585 = EDGE_CURVE('',#173586,#171987,#173588,.T.); +#173586 = VERTEX_POINT('',#173587); +#173587 = CARTESIAN_POINT('',(-0.85,0.1,-0.7)); +#173588 = LINE('',#173589,#173590); +#173589 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#173590 = VECTOR('',#173591,1.); +#173591 = DIRECTION('',(-1.,0.,0.)); +#173592 = ORIENTED_EDGE('',*,*,#173593,.T.); +#173593 = EDGE_CURVE('',#173586,#173594,#173596,.T.); +#173594 = VERTEX_POINT('',#173595); +#173595 = CARTESIAN_POINT('',(-0.8,0.1,-0.7)); +#173596 = LINE('',#173597,#173598); +#173597 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#173598 = VECTOR('',#173599,1.); +#173599 = DIRECTION('',(1.,0.,0.)); +#173600 = ORIENTED_EDGE('',*,*,#173601,.T.); +#173601 = EDGE_CURVE('',#173594,#172696,#173602,.T.); +#173602 = LINE('',#173603,#173604); +#173603 = CARTESIAN_POINT('',(-0.8,0.1,-0.7)); +#173604 = VECTOR('',#173605,1.); +#173605 = DIRECTION('',(0.,-1.,0.)); +#173606 = ORIENTED_EDGE('',*,*,#172695,.F.); +#173607 = PLANE('',#173608); +#173608 = AXIS2_PLACEMENT_3D('',#173609,#173610,#173611); +#173609 = CARTESIAN_POINT('',(-1.1,0.1,-0.7)); +#173610 = DIRECTION('',(0.,0.,-1.)); +#173611 = DIRECTION('',(-1.,0.,-0.)); +#173612 = ADVANCED_FACE('',(#173613),#173631,.T.); +#173613 = FACE_BOUND('',#173614,.T.); +#173614 = EDGE_LOOP('',(#173615,#173616,#173624,#173630)); +#173615 = ORIENTED_EDGE('',*,*,#173601,.F.); +#173616 = ORIENTED_EDGE('',*,*,#173617,.T.); +#173617 = EDGE_CURVE('',#173594,#173618,#173620,.T.); +#173618 = VERTEX_POINT('',#173619); +#173619 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#173620 = LINE('',#173621,#173622); +#173621 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#173622 = VECTOR('',#173623,1.); +#173623 = DIRECTION('',(-0.,-0.,-1.)); +#173624 = ORIENTED_EDGE('',*,*,#173625,.T.); +#173625 = EDGE_CURVE('',#173618,#172704,#173626,.T.); +#173626 = LINE('',#173627,#173628); +#173627 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#173628 = VECTOR('',#173629,1.); +#173629 = DIRECTION('',(0.,-1.,0.)); +#173630 = ORIENTED_EDGE('',*,*,#172703,.F.); +#173631 = PLANE('',#173632); +#173632 = AXIS2_PLACEMENT_3D('',#173633,#173634,#173635); +#173633 = CARTESIAN_POINT('',(-0.8,0.1,-0.9)); +#173634 = DIRECTION('',(-1.,0.,0.)); +#173635 = DIRECTION('',(0.,0.,1.)); +#173636 = ADVANCED_FACE('',(#173637),#173657,.T.); +#173637 = FACE_BOUND('',#173638,.T.); +#173638 = EDGE_LOOP('',(#173639,#173640,#173648,#173654,#173655,#173656) + ); +#173639 = ORIENTED_EDGE('',*,*,#173625,.F.); +#173640 = ORIENTED_EDGE('',*,*,#173641,.T.); +#173641 = EDGE_CURVE('',#173618,#173642,#173644,.T.); +#173642 = VERTEX_POINT('',#173643); +#173643 = CARTESIAN_POINT('',(-0.85,0.1,-0.9)); +#173644 = LINE('',#173645,#173646); +#173645 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#173646 = VECTOR('',#173647,1.); +#173647 = DIRECTION('',(-1.,-0.,-0.)); +#173648 = ORIENTED_EDGE('',*,*,#173649,.F.); +#173649 = EDGE_CURVE('',#171977,#173642,#173650,.T.); +#173650 = LINE('',#173651,#173652); +#173651 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#173652 = VECTOR('',#173653,1.); +#173653 = DIRECTION('',(1.,0.,0.)); +#173654 = ORIENTED_EDGE('',*,*,#171976,.T.); +#173655 = ORIENTED_EDGE('',*,*,#172546,.T.); +#173656 = ORIENTED_EDGE('',*,*,#172711,.F.); +#173657 = PLANE('',#173658); +#173658 = AXIS2_PLACEMENT_3D('',#173659,#173660,#173661); +#173659 = CARTESIAN_POINT('',(-1.1,0.1,-0.9)); +#173660 = DIRECTION('',(-0.,0.,1.)); +#173661 = DIRECTION('',(1.,0.,0.)); +#173662 = ADVANCED_FACE('',(#173663),#173674,.F.); +#173663 = FACE_BOUND('',#173664,.T.); +#173664 = EDGE_LOOP('',(#173665,#173666,#173672,#173673)); +#173665 = ORIENTED_EDGE('',*,*,#173593,.F.); +#173666 = ORIENTED_EDGE('',*,*,#173667,.F.); +#173667 = EDGE_CURVE('',#173642,#173586,#173668,.T.); +#173668 = LINE('',#173669,#173670); +#173669 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#173670 = VECTOR('',#173671,1.); +#173671 = DIRECTION('',(-0.,-0.,1.)); +#173672 = ORIENTED_EDGE('',*,*,#173641,.F.); +#173673 = ORIENTED_EDGE('',*,*,#173617,.F.); +#173674 = PLANE('',#173675); +#173675 = AXIS2_PLACEMENT_3D('',#173676,#173677,#173678); +#173676 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173677 = DIRECTION('',(0.,1.,0.)); +#173678 = DIRECTION('',(0.,-0.,1.)); +#173679 = ADVANCED_FACE('',(#173680),#173705,.T.); +#173680 = FACE_BOUND('',#173681,.T.); +#173681 = EDGE_LOOP('',(#173682,#173690,#173698,#173704)); +#173682 = ORIENTED_EDGE('',*,*,#173683,.F.); +#173683 = EDGE_CURVE('',#173684,#172726,#173686,.T.); +#173684 = VERTEX_POINT('',#173685); +#173685 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173686 = LINE('',#173687,#173688); +#173687 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173688 = VECTOR('',#173689,1.); +#173689 = DIRECTION('',(0.,-1.,0.)); +#173690 = ORIENTED_EDGE('',*,*,#173691,.T.); +#173691 = EDGE_CURVE('',#173684,#173692,#173694,.T.); +#173692 = VERTEX_POINT('',#173693); +#173693 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#173694 = LINE('',#173695,#173696); +#173695 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173696 = VECTOR('',#173697,1.); +#173697 = DIRECTION('',(0.,0.,1.)); +#173698 = ORIENTED_EDGE('',*,*,#173699,.T.); +#173699 = EDGE_CURVE('',#173692,#172734,#173700,.T.); +#173700 = LINE('',#173701,#173702); +#173701 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#173702 = VECTOR('',#173703,1.); +#173703 = DIRECTION('',(0.,-1.,0.)); +#173704 = ORIENTED_EDGE('',*,*,#172733,.F.); +#173705 = PLANE('',#173706); +#173706 = AXIS2_PLACEMENT_3D('',#173707,#173708,#173709); +#173707 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173708 = DIRECTION('',(1.,0.,-0.)); +#173709 = DIRECTION('',(-0.,0.,-1.)); +#173710 = ADVANCED_FACE('',(#173711),#173731,.T.); +#173711 = FACE_BOUND('',#173712,.T.); +#173712 = EDGE_LOOP('',(#173713,#173714,#173722,#173728,#173729,#173730) + ); +#173713 = ORIENTED_EDGE('',*,*,#173699,.F.); +#173714 = ORIENTED_EDGE('',*,*,#173715,.T.); +#173715 = EDGE_CURVE('',#173692,#173716,#173718,.T.); +#173716 = VERTEX_POINT('',#173717); +#173717 = CARTESIAN_POINT('',(0.85,0.1,-0.7)); +#173718 = LINE('',#173719,#173720); +#173719 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#173720 = VECTOR('',#173721,1.); +#173721 = DIRECTION('',(1.,0.,0.)); +#173722 = ORIENTED_EDGE('',*,*,#173723,.F.); +#173723 = EDGE_CURVE('',#172017,#173716,#173724,.T.); +#173724 = LINE('',#173725,#173726); +#173725 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#173726 = VECTOR('',#173727,1.); +#173727 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#173728 = ORIENTED_EDGE('',*,*,#172016,.T.); +#173729 = ORIENTED_EDGE('',*,*,#172398,.T.); +#173730 = ORIENTED_EDGE('',*,*,#172741,.F.); +#173731 = PLANE('',#173732); +#173732 = AXIS2_PLACEMENT_3D('',#173733,#173734,#173735); +#173733 = CARTESIAN_POINT('',(0.8,0.1,-0.7)); +#173734 = DIRECTION('',(0.,0.,-1.)); +#173735 = DIRECTION('',(-1.,0.,-0.)); +#173736 = ADVANCED_FACE('',(#173737),#173757,.T.); +#173737 = FACE_BOUND('',#173738,.T.); +#173738 = EDGE_LOOP('',(#173739,#173740,#173741,#173749,#173755,#173756) + ); +#173739 = ORIENTED_EDGE('',*,*,#172405,.F.); +#173740 = ORIENTED_EDGE('',*,*,#172034,.T.); +#173741 = ORIENTED_EDGE('',*,*,#173742,.F.); +#173742 = EDGE_CURVE('',#173743,#172027,#173745,.T.); +#173743 = VERTEX_POINT('',#173744); +#173744 = CARTESIAN_POINT('',(0.85,1.E-01,-0.9)); +#173745 = LINE('',#173746,#173747); +#173746 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173747 = VECTOR('',#173748,1.); +#173748 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#173749 = ORIENTED_EDGE('',*,*,#173750,.T.); +#173750 = EDGE_CURVE('',#173743,#173684,#173751,.T.); +#173751 = LINE('',#173752,#173753); +#173752 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173753 = VECTOR('',#173754,1.); +#173754 = DIRECTION('',(-1.,-0.,-0.)); +#173755 = ORIENTED_EDGE('',*,*,#173683,.T.); +#173756 = ORIENTED_EDGE('',*,*,#172725,.F.); +#173757 = PLANE('',#173758); +#173758 = AXIS2_PLACEMENT_3D('',#173759,#173760,#173761); +#173759 = CARTESIAN_POINT('',(0.8,0.1,-0.9)); +#173760 = DIRECTION('',(-0.,0.,1.)); +#173761 = DIRECTION('',(1.,0.,0.)); +#173762 = ADVANCED_FACE('',(#173763),#173774,.F.); +#173763 = FACE_BOUND('',#173764,.T.); +#173764 = EDGE_LOOP('',(#173765,#173766,#173772,#173773)); +#173765 = ORIENTED_EDGE('',*,*,#173750,.F.); +#173766 = ORIENTED_EDGE('',*,*,#173767,.T.); +#173767 = EDGE_CURVE('',#173743,#173716,#173768,.T.); +#173768 = LINE('',#173769,#173770); +#173769 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#173770 = VECTOR('',#173771,1.); +#173771 = DIRECTION('',(-0.,-0.,1.)); +#173772 = ORIENTED_EDGE('',*,*,#173715,.F.); +#173773 = ORIENTED_EDGE('',*,*,#173691,.F.); +#173774 = PLANE('',#173775); +#173775 = AXIS2_PLACEMENT_3D('',#173776,#173777,#173778); +#173776 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173777 = DIRECTION('',(0.,1.,0.)); +#173778 = DIRECTION('',(0.,-0.,1.)); +#173779 = ADVANCED_FACE('',(#173780),#173805,.T.); +#173780 = FACE_BOUND('',#173781,.T.); +#173781 = EDGE_LOOP('',(#173782,#173790,#173798,#173804)); +#173782 = ORIENTED_EDGE('',*,*,#173783,.F.); +#173783 = EDGE_CURVE('',#173784,#172749,#173786,.T.); +#173784 = VERTEX_POINT('',#173785); +#173785 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173786 = LINE('',#173787,#173788); +#173787 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173788 = VECTOR('',#173789,1.); +#173789 = DIRECTION('',(0.,-1.,0.)); +#173790 = ORIENTED_EDGE('',*,*,#173791,.T.); +#173791 = EDGE_CURVE('',#173784,#173792,#173794,.T.); +#173792 = VERTEX_POINT('',#173793); +#173793 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#173794 = LINE('',#173795,#173796); +#173795 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173796 = VECTOR('',#173797,1.); +#173797 = DIRECTION('',(0.,0.,1.)); +#173798 = ORIENTED_EDGE('',*,*,#173799,.T.); +#173799 = EDGE_CURVE('',#173792,#172757,#173800,.T.); +#173800 = LINE('',#173801,#173802); +#173801 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#173802 = VECTOR('',#173803,1.); +#173803 = DIRECTION('',(0.,-1.,0.)); +#173804 = ORIENTED_EDGE('',*,*,#172756,.F.); +#173805 = PLANE('',#173806); +#173806 = AXIS2_PLACEMENT_3D('',#173807,#173808,#173809); +#173807 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173808 = DIRECTION('',(1.,0.,-0.)); +#173809 = DIRECTION('',(-0.,0.,-1.)); +#173810 = ADVANCED_FACE('',(#173811),#173831,.T.); +#173811 = FACE_BOUND('',#173812,.T.); +#173812 = EDGE_LOOP('',(#173813,#173814,#173822,#173828,#173829,#173830) + ); +#173813 = ORIENTED_EDGE('',*,*,#173799,.F.); +#173814 = ORIENTED_EDGE('',*,*,#173815,.T.); +#173815 = EDGE_CURVE('',#173792,#173816,#173818,.T.); +#173816 = VERTEX_POINT('',#173817); +#173817 = CARTESIAN_POINT('',(0.85,0.1,-0.3)); +#173818 = LINE('',#173819,#173820); +#173819 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#173820 = VECTOR('',#173821,1.); +#173821 = DIRECTION('',(1.,0.,0.)); +#173822 = ORIENTED_EDGE('',*,*,#173823,.F.); +#173823 = EDGE_CURVE('',#172057,#173816,#173824,.T.); +#173824 = LINE('',#173825,#173826); +#173825 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#173826 = VECTOR('',#173827,1.); +#173827 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#173828 = ORIENTED_EDGE('',*,*,#172056,.T.); +#173829 = ORIENTED_EDGE('',*,*,#172375,.T.); +#173830 = ORIENTED_EDGE('',*,*,#172764,.F.); +#173831 = PLANE('',#173832); +#173832 = AXIS2_PLACEMENT_3D('',#173833,#173834,#173835); +#173833 = CARTESIAN_POINT('',(0.8,0.1,-0.3)); +#173834 = DIRECTION('',(0.,0.,-1.)); +#173835 = DIRECTION('',(-1.,0.,-0.)); +#173836 = ADVANCED_FACE('',(#173837),#173857,.T.); +#173837 = FACE_BOUND('',#173838,.T.); +#173838 = EDGE_LOOP('',(#173839,#173840,#173841,#173849,#173855,#173856) + ); +#173839 = ORIENTED_EDGE('',*,*,#172382,.F.); +#173840 = ORIENTED_EDGE('',*,*,#172074,.T.); +#173841 = ORIENTED_EDGE('',*,*,#173842,.F.); +#173842 = EDGE_CURVE('',#173843,#172067,#173845,.T.); +#173843 = VERTEX_POINT('',#173844); +#173844 = CARTESIAN_POINT('',(0.85,1.E-01,-0.5)); +#173845 = LINE('',#173846,#173847); +#173846 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173847 = VECTOR('',#173848,1.); +#173848 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#173849 = ORIENTED_EDGE('',*,*,#173850,.T.); +#173850 = EDGE_CURVE('',#173843,#173784,#173851,.T.); +#173851 = LINE('',#173852,#173853); +#173852 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173853 = VECTOR('',#173854,1.); +#173854 = DIRECTION('',(-1.,-0.,-0.)); +#173855 = ORIENTED_EDGE('',*,*,#173783,.T.); +#173856 = ORIENTED_EDGE('',*,*,#172748,.F.); +#173857 = PLANE('',#173858); +#173858 = AXIS2_PLACEMENT_3D('',#173859,#173860,#173861); +#173859 = CARTESIAN_POINT('',(0.8,0.1,-0.5)); +#173860 = DIRECTION('',(-0.,0.,1.)); +#173861 = DIRECTION('',(1.,0.,0.)); +#173862 = ADVANCED_FACE('',(#173863),#173874,.F.); +#173863 = FACE_BOUND('',#173864,.T.); +#173864 = EDGE_LOOP('',(#173865,#173866,#173872,#173873)); +#173865 = ORIENTED_EDGE('',*,*,#173850,.F.); +#173866 = ORIENTED_EDGE('',*,*,#173867,.T.); +#173867 = EDGE_CURVE('',#173843,#173816,#173868,.T.); +#173868 = LINE('',#173869,#173870); +#173869 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#173870 = VECTOR('',#173871,1.); +#173871 = DIRECTION('',(-0.,-0.,1.)); +#173872 = ORIENTED_EDGE('',*,*,#173815,.F.); +#173873 = ORIENTED_EDGE('',*,*,#173791,.F.); +#173874 = PLANE('',#173875); +#173875 = AXIS2_PLACEMENT_3D('',#173876,#173877,#173878); +#173876 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173877 = DIRECTION('',(0.,1.,0.)); +#173878 = DIRECTION('',(0.,-0.,1.)); +#173879 = ADVANCED_FACE('',(#173880),#173905,.T.); +#173880 = FACE_BOUND('',#173881,.T.); +#173881 = EDGE_LOOP('',(#173882,#173890,#173898,#173904)); +#173882 = ORIENTED_EDGE('',*,*,#173883,.F.); +#173883 = EDGE_CURVE('',#173884,#172772,#173886,.T.); +#173884 = VERTEX_POINT('',#173885); +#173885 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173886 = LINE('',#173887,#173888); +#173887 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173888 = VECTOR('',#173889,1.); +#173889 = DIRECTION('',(0.,-1.,0.)); +#173890 = ORIENTED_EDGE('',*,*,#173891,.T.); +#173891 = EDGE_CURVE('',#173884,#173892,#173894,.T.); +#173892 = VERTEX_POINT('',#173893); +#173893 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#173894 = LINE('',#173895,#173896); +#173895 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173896 = VECTOR('',#173897,1.); +#173897 = DIRECTION('',(0.,0.,1.)); +#173898 = ORIENTED_EDGE('',*,*,#173899,.T.); +#173899 = EDGE_CURVE('',#173892,#172780,#173900,.T.); +#173900 = LINE('',#173901,#173902); +#173901 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#173902 = VECTOR('',#173903,1.); +#173903 = DIRECTION('',(0.,-1.,0.)); +#173904 = ORIENTED_EDGE('',*,*,#172779,.F.); +#173905 = PLANE('',#173906); +#173906 = AXIS2_PLACEMENT_3D('',#173907,#173908,#173909); +#173907 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173908 = DIRECTION('',(1.,0.,-0.)); +#173909 = DIRECTION('',(-0.,0.,-1.)); +#173910 = ADVANCED_FACE('',(#173911),#173931,.T.); +#173911 = FACE_BOUND('',#173912,.T.); +#173912 = EDGE_LOOP('',(#173913,#173914,#173922,#173928,#173929,#173930) + ); +#173913 = ORIENTED_EDGE('',*,*,#173899,.F.); +#173914 = ORIENTED_EDGE('',*,*,#173915,.T.); +#173915 = EDGE_CURVE('',#173892,#173916,#173918,.T.); +#173916 = VERTEX_POINT('',#173917); +#173917 = CARTESIAN_POINT('',(0.85,0.1,0.1)); +#173918 = LINE('',#173919,#173920); +#173919 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#173920 = VECTOR('',#173921,1.); +#173921 = DIRECTION('',(1.,0.,0.)); +#173922 = ORIENTED_EDGE('',*,*,#173923,.F.); +#173923 = EDGE_CURVE('',#172097,#173916,#173924,.T.); +#173924 = LINE('',#173925,#173926); +#173925 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#173926 = VECTOR('',#173927,1.); +#173927 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#173928 = ORIENTED_EDGE('',*,*,#172096,.T.); +#173929 = ORIENTED_EDGE('',*,*,#172352,.T.); +#173930 = ORIENTED_EDGE('',*,*,#172787,.F.); +#173931 = PLANE('',#173932); +#173932 = AXIS2_PLACEMENT_3D('',#173933,#173934,#173935); +#173933 = CARTESIAN_POINT('',(0.8,0.1,0.1)); +#173934 = DIRECTION('',(0.,0.,-1.)); +#173935 = DIRECTION('',(-1.,0.,-0.)); +#173936 = ADVANCED_FACE('',(#173937),#173957,.T.); +#173937 = FACE_BOUND('',#173938,.T.); +#173938 = EDGE_LOOP('',(#173939,#173940,#173941,#173949,#173955,#173956) + ); +#173939 = ORIENTED_EDGE('',*,*,#172359,.F.); +#173940 = ORIENTED_EDGE('',*,*,#172114,.T.); +#173941 = ORIENTED_EDGE('',*,*,#173942,.F.); +#173942 = EDGE_CURVE('',#173943,#172107,#173945,.T.); +#173943 = VERTEX_POINT('',#173944); +#173944 = CARTESIAN_POINT('',(0.85,1.E-01,-0.1)); +#173945 = LINE('',#173946,#173947); +#173946 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173947 = VECTOR('',#173948,1.); +#173948 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#173949 = ORIENTED_EDGE('',*,*,#173950,.T.); +#173950 = EDGE_CURVE('',#173943,#173884,#173951,.T.); +#173951 = LINE('',#173952,#173953); +#173952 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173953 = VECTOR('',#173954,1.); +#173954 = DIRECTION('',(-1.,-0.,-0.)); +#173955 = ORIENTED_EDGE('',*,*,#173883,.T.); +#173956 = ORIENTED_EDGE('',*,*,#172771,.F.); +#173957 = PLANE('',#173958); +#173958 = AXIS2_PLACEMENT_3D('',#173959,#173960,#173961); +#173959 = CARTESIAN_POINT('',(0.8,0.1,-0.1)); +#173960 = DIRECTION('',(-0.,0.,1.)); +#173961 = DIRECTION('',(1.,0.,0.)); +#173962 = ADVANCED_FACE('',(#173963),#173974,.F.); +#173963 = FACE_BOUND('',#173964,.T.); +#173964 = EDGE_LOOP('',(#173965,#173966,#173972,#173973)); +#173965 = ORIENTED_EDGE('',*,*,#173950,.F.); +#173966 = ORIENTED_EDGE('',*,*,#173967,.T.); +#173967 = EDGE_CURVE('',#173943,#173916,#173968,.T.); +#173968 = LINE('',#173969,#173970); +#173969 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#173970 = VECTOR('',#173971,1.); +#173971 = DIRECTION('',(-0.,-0.,1.)); +#173972 = ORIENTED_EDGE('',*,*,#173915,.F.); +#173973 = ORIENTED_EDGE('',*,*,#173891,.F.); +#173974 = PLANE('',#173975); +#173975 = AXIS2_PLACEMENT_3D('',#173976,#173977,#173978); +#173976 = CARTESIAN_POINT('',(0.,0.1,0.)); +#173977 = DIRECTION('',(0.,1.,0.)); +#173978 = DIRECTION('',(0.,-0.,1.)); +#173979 = ADVANCED_FACE('',(#173980),#174005,.T.); +#173980 = FACE_BOUND('',#173981,.T.); +#173981 = EDGE_LOOP('',(#173982,#173990,#173998,#174004)); +#173982 = ORIENTED_EDGE('',*,*,#173983,.F.); +#173983 = EDGE_CURVE('',#173984,#172795,#173986,.T.); +#173984 = VERTEX_POINT('',#173985); +#173985 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#173986 = LINE('',#173987,#173988); +#173987 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#173988 = VECTOR('',#173989,1.); +#173989 = DIRECTION('',(0.,-1.,0.)); +#173990 = ORIENTED_EDGE('',*,*,#173991,.T.); +#173991 = EDGE_CURVE('',#173984,#173992,#173994,.T.); +#173992 = VERTEX_POINT('',#173993); +#173993 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#173994 = LINE('',#173995,#173996); +#173995 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#173996 = VECTOR('',#173997,1.); +#173997 = DIRECTION('',(0.,0.,1.)); +#173998 = ORIENTED_EDGE('',*,*,#173999,.T.); +#173999 = EDGE_CURVE('',#173992,#172803,#174000,.T.); +#174000 = LINE('',#174001,#174002); +#174001 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#174002 = VECTOR('',#174003,1.); +#174003 = DIRECTION('',(0.,-1.,0.)); +#174004 = ORIENTED_EDGE('',*,*,#172802,.F.); +#174005 = PLANE('',#174006); +#174006 = AXIS2_PLACEMENT_3D('',#174007,#174008,#174009); +#174007 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#174008 = DIRECTION('',(1.,0.,-0.)); +#174009 = DIRECTION('',(-0.,0.,-1.)); +#174010 = ADVANCED_FACE('',(#174011),#174031,.T.); +#174011 = FACE_BOUND('',#174012,.T.); +#174012 = EDGE_LOOP('',(#174013,#174014,#174022,#174028,#174029,#174030) + ); +#174013 = ORIENTED_EDGE('',*,*,#173999,.F.); +#174014 = ORIENTED_EDGE('',*,*,#174015,.T.); +#174015 = EDGE_CURVE('',#173992,#174016,#174018,.T.); +#174016 = VERTEX_POINT('',#174017); +#174017 = CARTESIAN_POINT('',(0.85,0.1,0.5)); +#174018 = LINE('',#174019,#174020); +#174019 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#174020 = VECTOR('',#174021,1.); +#174021 = DIRECTION('',(1.,0.,0.)); +#174022 = ORIENTED_EDGE('',*,*,#174023,.F.); +#174023 = EDGE_CURVE('',#172137,#174016,#174024,.T.); +#174024 = LINE('',#174025,#174026); +#174025 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#174026 = VECTOR('',#174027,1.); +#174027 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#174028 = ORIENTED_EDGE('',*,*,#172136,.T.); +#174029 = ORIENTED_EDGE('',*,*,#172329,.T.); +#174030 = ORIENTED_EDGE('',*,*,#172810,.F.); +#174031 = PLANE('',#174032); +#174032 = AXIS2_PLACEMENT_3D('',#174033,#174034,#174035); +#174033 = CARTESIAN_POINT('',(0.8,0.1,0.5)); +#174034 = DIRECTION('',(0.,0.,-1.)); +#174035 = DIRECTION('',(-1.,0.,-0.)); +#174036 = ADVANCED_FACE('',(#174037),#174057,.T.); +#174037 = FACE_BOUND('',#174038,.T.); +#174038 = EDGE_LOOP('',(#174039,#174040,#174041,#174049,#174055,#174056) + ); +#174039 = ORIENTED_EDGE('',*,*,#172336,.F.); +#174040 = ORIENTED_EDGE('',*,*,#172154,.T.); +#174041 = ORIENTED_EDGE('',*,*,#174042,.F.); +#174042 = EDGE_CURVE('',#174043,#172147,#174045,.T.); +#174043 = VERTEX_POINT('',#174044); +#174044 = CARTESIAN_POINT('',(0.85,1.E-01,0.3)); +#174045 = LINE('',#174046,#174047); +#174046 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#174047 = VECTOR('',#174048,1.); +#174048 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174049 = ORIENTED_EDGE('',*,*,#174050,.T.); +#174050 = EDGE_CURVE('',#174043,#173984,#174051,.T.); +#174051 = LINE('',#174052,#174053); +#174052 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#174053 = VECTOR('',#174054,1.); +#174054 = DIRECTION('',(-1.,-0.,-0.)); +#174055 = ORIENTED_EDGE('',*,*,#173983,.T.); +#174056 = ORIENTED_EDGE('',*,*,#172794,.F.); +#174057 = PLANE('',#174058); +#174058 = AXIS2_PLACEMENT_3D('',#174059,#174060,#174061); +#174059 = CARTESIAN_POINT('',(0.8,0.1,0.3)); +#174060 = DIRECTION('',(-0.,0.,1.)); +#174061 = DIRECTION('',(1.,0.,0.)); +#174062 = ADVANCED_FACE('',(#174063),#174074,.F.); +#174063 = FACE_BOUND('',#174064,.T.); +#174064 = EDGE_LOOP('',(#174065,#174066,#174072,#174073)); +#174065 = ORIENTED_EDGE('',*,*,#174050,.F.); +#174066 = ORIENTED_EDGE('',*,*,#174067,.T.); +#174067 = EDGE_CURVE('',#174043,#174016,#174068,.T.); +#174068 = LINE('',#174069,#174070); +#174069 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174070 = VECTOR('',#174071,1.); +#174071 = DIRECTION('',(-0.,-0.,1.)); +#174072 = ORIENTED_EDGE('',*,*,#174015,.F.); +#174073 = ORIENTED_EDGE('',*,*,#173991,.F.); +#174074 = PLANE('',#174075); +#174075 = AXIS2_PLACEMENT_3D('',#174076,#174077,#174078); +#174076 = CARTESIAN_POINT('',(0.,0.1,0.)); +#174077 = DIRECTION('',(0.,1.,0.)); +#174078 = DIRECTION('',(0.,-0.,1.)); +#174079 = ADVANCED_FACE('',(#174080),#174105,.T.); +#174080 = FACE_BOUND('',#174081,.T.); +#174081 = EDGE_LOOP('',(#174082,#174090,#174098,#174104)); +#174082 = ORIENTED_EDGE('',*,*,#174083,.F.); +#174083 = EDGE_CURVE('',#174084,#172818,#174086,.T.); +#174084 = VERTEX_POINT('',#174085); +#174085 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174086 = LINE('',#174087,#174088); +#174087 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174088 = VECTOR('',#174089,1.); +#174089 = DIRECTION('',(0.,-1.,0.)); +#174090 = ORIENTED_EDGE('',*,*,#174091,.T.); +#174091 = EDGE_CURVE('',#174084,#174092,#174094,.T.); +#174092 = VERTEX_POINT('',#174093); +#174093 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#174094 = LINE('',#174095,#174096); +#174095 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174096 = VECTOR('',#174097,1.); +#174097 = DIRECTION('',(0.,0.,1.)); +#174098 = ORIENTED_EDGE('',*,*,#174099,.T.); +#174099 = EDGE_CURVE('',#174092,#172826,#174100,.T.); +#174100 = LINE('',#174101,#174102); +#174101 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#174102 = VECTOR('',#174103,1.); +#174103 = DIRECTION('',(0.,-1.,0.)); +#174104 = ORIENTED_EDGE('',*,*,#172825,.F.); +#174105 = PLANE('',#174106); +#174106 = AXIS2_PLACEMENT_3D('',#174107,#174108,#174109); +#174107 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174108 = DIRECTION('',(1.,0.,-0.)); +#174109 = DIRECTION('',(-0.,0.,-1.)); +#174110 = ADVANCED_FACE('',(#174111),#174131,.T.); +#174111 = FACE_BOUND('',#174112,.T.); +#174112 = EDGE_LOOP('',(#174113,#174114,#174122,#174128,#174129,#174130) + ); +#174113 = ORIENTED_EDGE('',*,*,#174099,.F.); +#174114 = ORIENTED_EDGE('',*,*,#174115,.T.); +#174115 = EDGE_CURVE('',#174092,#174116,#174118,.T.); +#174116 = VERTEX_POINT('',#174117); +#174117 = CARTESIAN_POINT('',(0.85,0.1,0.9)); +#174118 = LINE('',#174119,#174120); +#174119 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#174120 = VECTOR('',#174121,1.); +#174121 = DIRECTION('',(1.,0.,0.)); +#174122 = ORIENTED_EDGE('',*,*,#174123,.T.); +#174123 = EDGE_CURVE('',#174116,#172177,#174124,.T.); +#174124 = LINE('',#174125,#174126); +#174125 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#174126 = VECTOR('',#174127,1.); +#174127 = DIRECTION('',(1.,0.,0.)); +#174128 = ORIENTED_EDGE('',*,*,#172176,.T.); +#174129 = ORIENTED_EDGE('',*,*,#172306,.T.); +#174130 = ORIENTED_EDGE('',*,*,#172833,.F.); +#174131 = PLANE('',#174132); +#174132 = AXIS2_PLACEMENT_3D('',#174133,#174134,#174135); +#174133 = CARTESIAN_POINT('',(0.8,0.1,0.9)); +#174134 = DIRECTION('',(0.,0.,-1.)); +#174135 = DIRECTION('',(-1.,0.,-0.)); +#174136 = ADVANCED_FACE('',(#174137),#174157,.T.); +#174137 = FACE_BOUND('',#174138,.T.); +#174138 = EDGE_LOOP('',(#174139,#174140,#174141,#174149,#174155,#174156) + ); +#174139 = ORIENTED_EDGE('',*,*,#172313,.F.); +#174140 = ORIENTED_EDGE('',*,*,#172194,.T.); +#174141 = ORIENTED_EDGE('',*,*,#174142,.T.); +#174142 = EDGE_CURVE('',#172187,#174143,#174145,.T.); +#174143 = VERTEX_POINT('',#174144); +#174144 = CARTESIAN_POINT('',(0.85,1.E-01,0.7)); +#174145 = LINE('',#174146,#174147); +#174146 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174147 = VECTOR('',#174148,1.); +#174148 = DIRECTION('',(-1.,-0.,-0.)); +#174149 = ORIENTED_EDGE('',*,*,#174150,.T.); +#174150 = EDGE_CURVE('',#174143,#174084,#174151,.T.); +#174151 = LINE('',#174152,#174153); +#174152 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174153 = VECTOR('',#174154,1.); +#174154 = DIRECTION('',(-1.,-0.,-0.)); +#174155 = ORIENTED_EDGE('',*,*,#174083,.T.); +#174156 = ORIENTED_EDGE('',*,*,#172817,.F.); +#174157 = PLANE('',#174158); +#174158 = AXIS2_PLACEMENT_3D('',#174159,#174160,#174161); +#174159 = CARTESIAN_POINT('',(0.8,0.1,0.7)); +#174160 = DIRECTION('',(-0.,0.,1.)); +#174161 = DIRECTION('',(1.,0.,0.)); +#174162 = ADVANCED_FACE('',(#174163),#174174,.F.); +#174163 = FACE_BOUND('',#174164,.T.); +#174164 = EDGE_LOOP('',(#174165,#174166,#174172,#174173)); +#174165 = ORIENTED_EDGE('',*,*,#174150,.F.); +#174166 = ORIENTED_EDGE('',*,*,#174167,.T.); +#174167 = EDGE_CURVE('',#174143,#174116,#174168,.T.); +#174168 = LINE('',#174169,#174170); +#174169 = CARTESIAN_POINT('',(0.85,0.1,0.)); +#174170 = VECTOR('',#174171,1.); +#174171 = DIRECTION('',(0.,-0.,1.)); +#174172 = ORIENTED_EDGE('',*,*,#174115,.F.); +#174173 = ORIENTED_EDGE('',*,*,#174091,.F.); +#174174 = PLANE('',#174175); +#174175 = AXIS2_PLACEMENT_3D('',#174176,#174177,#174178); +#174176 = CARTESIAN_POINT('',(0.,0.1,0.)); +#174177 = DIRECTION('',(0.,1.,0.)); +#174178 = DIRECTION('',(0.,-0.,1.)); +#174179 = ADVANCED_FACE('',(#174180),#174207,.T.); +#174180 = FACE_BOUND('',#174181,.T.); +#174181 = EDGE_LOOP('',(#174182,#174183,#174184,#174192,#174200,#174206) + ); +#174182 = ORIENTED_EDGE('',*,*,#172576,.F.); +#174183 = ORIENTED_EDGE('',*,*,#172234,.T.); +#174184 = ORIENTED_EDGE('',*,*,#174185,.F.); +#174185 = EDGE_CURVE('',#174186,#172227,#174188,.T.); +#174186 = VERTEX_POINT('',#174187); +#174187 = CARTESIAN_POINT('',(-0.85,0.1,-0.3)); +#174188 = LINE('',#174189,#174190); +#174189 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#174190 = VECTOR('',#174191,1.); +#174191 = DIRECTION('',(-1.,0.,0.)); +#174192 = ORIENTED_EDGE('',*,*,#174193,.T.); +#174193 = EDGE_CURVE('',#174186,#174194,#174196,.T.); +#174194 = VERTEX_POINT('',#174195); +#174195 = CARTESIAN_POINT('',(-0.8,0.1,-0.3)); +#174196 = LINE('',#174197,#174198); +#174197 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#174198 = VECTOR('',#174199,1.); +#174199 = DIRECTION('',(1.,0.,0.)); +#174200 = ORIENTED_EDGE('',*,*,#174201,.T.); +#174201 = EDGE_CURVE('',#174194,#172673,#174202,.T.); +#174202 = LINE('',#174203,#174204); +#174203 = CARTESIAN_POINT('',(-0.8,0.1,-0.3)); +#174204 = VECTOR('',#174205,1.); +#174205 = DIRECTION('',(0.,-1.,0.)); +#174206 = ORIENTED_EDGE('',*,*,#172672,.F.); +#174207 = PLANE('',#174208); +#174208 = AXIS2_PLACEMENT_3D('',#174209,#174210,#174211); +#174209 = CARTESIAN_POINT('',(-1.1,0.1,-0.3)); +#174210 = DIRECTION('',(0.,0.,-1.)); +#174211 = DIRECTION('',(-1.,0.,-0.)); +#174212 = ADVANCED_FACE('',(#174213),#174231,.T.); +#174213 = FACE_BOUND('',#174214,.T.); +#174214 = EDGE_LOOP('',(#174215,#174216,#174224,#174230)); +#174215 = ORIENTED_EDGE('',*,*,#174201,.F.); +#174216 = ORIENTED_EDGE('',*,*,#174217,.T.); +#174217 = EDGE_CURVE('',#174194,#174218,#174220,.T.); +#174218 = VERTEX_POINT('',#174219); +#174219 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#174220 = LINE('',#174221,#174222); +#174221 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#174222 = VECTOR('',#174223,1.); +#174223 = DIRECTION('',(-0.,-0.,-1.)); +#174224 = ORIENTED_EDGE('',*,*,#174225,.T.); +#174225 = EDGE_CURVE('',#174218,#172681,#174226,.T.); +#174226 = LINE('',#174227,#174228); +#174227 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#174228 = VECTOR('',#174229,1.); +#174229 = DIRECTION('',(0.,-1.,0.)); +#174230 = ORIENTED_EDGE('',*,*,#172680,.F.); +#174231 = PLANE('',#174232); +#174232 = AXIS2_PLACEMENT_3D('',#174233,#174234,#174235); +#174233 = CARTESIAN_POINT('',(-0.8,0.1,-0.5)); +#174234 = DIRECTION('',(-1.,0.,0.)); +#174235 = DIRECTION('',(0.,0.,1.)); +#174236 = ADVANCED_FACE('',(#174237),#174257,.T.); +#174237 = FACE_BOUND('',#174238,.T.); +#174238 = EDGE_LOOP('',(#174239,#174240,#174248,#174254,#174255,#174256) + ); +#174239 = ORIENTED_EDGE('',*,*,#174225,.F.); +#174240 = ORIENTED_EDGE('',*,*,#174241,.T.); +#174241 = EDGE_CURVE('',#174218,#174242,#174244,.T.); +#174242 = VERTEX_POINT('',#174243); +#174243 = CARTESIAN_POINT('',(-0.85,0.1,-0.5)); +#174244 = LINE('',#174245,#174246); +#174245 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#174246 = VECTOR('',#174247,1.); +#174247 = DIRECTION('',(-1.,-0.,-0.)); +#174248 = ORIENTED_EDGE('',*,*,#174249,.F.); +#174249 = EDGE_CURVE('',#172217,#174242,#174250,.T.); +#174250 = LINE('',#174251,#174252); +#174251 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#174252 = VECTOR('',#174253,1.); +#174253 = DIRECTION('',(1.,0.,0.)); +#174254 = ORIENTED_EDGE('',*,*,#172216,.T.); +#174255 = ORIENTED_EDGE('',*,*,#172569,.T.); +#174256 = ORIENTED_EDGE('',*,*,#172688,.F.); +#174257 = PLANE('',#174258); +#174258 = AXIS2_PLACEMENT_3D('',#174259,#174260,#174261); +#174259 = CARTESIAN_POINT('',(-1.1,0.1,-0.5)); +#174260 = DIRECTION('',(-0.,0.,1.)); +#174261 = DIRECTION('',(1.,0.,0.)); +#174262 = ADVANCED_FACE('',(#174263),#174274,.F.); +#174263 = FACE_BOUND('',#174264,.T.); +#174264 = EDGE_LOOP('',(#174265,#174266,#174272,#174273)); +#174265 = ORIENTED_EDGE('',*,*,#174193,.F.); +#174266 = ORIENTED_EDGE('',*,*,#174267,.F.); +#174267 = EDGE_CURVE('',#174242,#174186,#174268,.T.); +#174268 = LINE('',#174269,#174270); +#174269 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174270 = VECTOR('',#174271,1.); +#174271 = DIRECTION('',(-0.,-0.,1.)); +#174272 = ORIENTED_EDGE('',*,*,#174241,.F.); +#174273 = ORIENTED_EDGE('',*,*,#174217,.F.); +#174274 = PLANE('',#174275); +#174275 = AXIS2_PLACEMENT_3D('',#174276,#174277,#174278); +#174276 = CARTESIAN_POINT('',(0.,0.1,0.)); +#174277 = DIRECTION('',(0.,1.,0.)); +#174278 = DIRECTION('',(0.,-0.,1.)); +#174279 = ADVANCED_FACE('',(#174280),#174307,.T.); +#174280 = FACE_BOUND('',#174281,.T.); +#174281 = EDGE_LOOP('',(#174282,#174283,#174284,#174292,#174300,#174306) + ); +#174282 = ORIENTED_EDGE('',*,*,#172452,.F.); +#174283 = ORIENTED_EDGE('',*,*,#172274,.T.); +#174284 = ORIENTED_EDGE('',*,*,#174285,.T.); +#174285 = EDGE_CURVE('',#172267,#174286,#174288,.T.); +#174286 = VERTEX_POINT('',#174287); +#174287 = CARTESIAN_POINT('',(-0.85,0.1,0.1)); +#174288 = LINE('',#174289,#174290); +#174289 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#174290 = VECTOR('',#174291,1.); +#174291 = DIRECTION('',(1.,0.,0.)); +#174292 = ORIENTED_EDGE('',*,*,#174293,.T.); +#174293 = EDGE_CURVE('',#174286,#174294,#174296,.T.); +#174294 = VERTEX_POINT('',#174295); +#174295 = CARTESIAN_POINT('',(-0.8,0.1,0.1)); +#174296 = LINE('',#174297,#174298); +#174297 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#174298 = VECTOR('',#174299,1.); +#174299 = DIRECTION('',(1.,0.,0.)); +#174300 = ORIENTED_EDGE('',*,*,#174301,.T.); +#174301 = EDGE_CURVE('',#174294,#172650,#174302,.T.); +#174302 = LINE('',#174303,#174304); +#174303 = CARTESIAN_POINT('',(-0.8,0.1,0.1)); +#174304 = VECTOR('',#174305,1.); +#174305 = DIRECTION('',(0.,-1.,0.)); +#174306 = ORIENTED_EDGE('',*,*,#172649,.F.); +#174307 = PLANE('',#174308); +#174308 = AXIS2_PLACEMENT_3D('',#174309,#174310,#174311); +#174309 = CARTESIAN_POINT('',(-1.1,0.1,0.1)); +#174310 = DIRECTION('',(0.,0.,-1.)); +#174311 = DIRECTION('',(-1.,0.,-0.)); +#174312 = ADVANCED_FACE('',(#174313),#174331,.T.); +#174313 = FACE_BOUND('',#174314,.T.); +#174314 = EDGE_LOOP('',(#174315,#174316,#174324,#174330)); +#174315 = ORIENTED_EDGE('',*,*,#174301,.F.); +#174316 = ORIENTED_EDGE('',*,*,#174317,.T.); +#174317 = EDGE_CURVE('',#174294,#174318,#174320,.T.); +#174318 = VERTEX_POINT('',#174319); +#174319 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#174320 = LINE('',#174321,#174322); +#174321 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#174322 = VECTOR('',#174323,1.); +#174323 = DIRECTION('',(-0.,-0.,-1.)); +#174324 = ORIENTED_EDGE('',*,*,#174325,.T.); +#174325 = EDGE_CURVE('',#174318,#172658,#174326,.T.); +#174326 = LINE('',#174327,#174328); +#174327 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#174328 = VECTOR('',#174329,1.); +#174329 = DIRECTION('',(0.,-1.,0.)); +#174330 = ORIENTED_EDGE('',*,*,#172657,.F.); +#174331 = PLANE('',#174332); +#174332 = AXIS2_PLACEMENT_3D('',#174333,#174334,#174335); +#174333 = CARTESIAN_POINT('',(-0.8,0.1,-0.1)); +#174334 = DIRECTION('',(-1.,0.,0.)); +#174335 = DIRECTION('',(0.,0.,1.)); +#174336 = ADVANCED_FACE('',(#174337),#174357,.T.); +#174337 = FACE_BOUND('',#174338,.T.); +#174338 = EDGE_LOOP('',(#174339,#174340,#174348,#174354,#174355,#174356) + ); +#174339 = ORIENTED_EDGE('',*,*,#174325,.F.); +#174340 = ORIENTED_EDGE('',*,*,#174341,.T.); +#174341 = EDGE_CURVE('',#174318,#174342,#174344,.T.); +#174342 = VERTEX_POINT('',#174343); +#174343 = CARTESIAN_POINT('',(-0.85,0.1,-0.1)); +#174344 = LINE('',#174345,#174346); +#174345 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#174346 = VECTOR('',#174347,1.); +#174347 = DIRECTION('',(-1.,-0.,-0.)); +#174348 = ORIENTED_EDGE('',*,*,#174349,.T.); +#174349 = EDGE_CURVE('',#174342,#172257,#174350,.T.); +#174350 = LINE('',#174351,#174352); +#174351 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#174352 = VECTOR('',#174353,1.); +#174353 = DIRECTION('',(-1.,-0.,-0.)); +#174354 = ORIENTED_EDGE('',*,*,#172256,.T.); +#174355 = ORIENTED_EDGE('',*,*,#172592,.T.); +#174356 = ORIENTED_EDGE('',*,*,#172665,.F.); +#174357 = PLANE('',#174358); +#174358 = AXIS2_PLACEMENT_3D('',#174359,#174360,#174361); +#174359 = CARTESIAN_POINT('',(-1.1,0.1,-0.1)); +#174360 = DIRECTION('',(-0.,0.,1.)); +#174361 = DIRECTION('',(1.,0.,0.)); +#174362 = ADVANCED_FACE('',(#174363),#174374,.F.); +#174363 = FACE_BOUND('',#174364,.T.); +#174364 = EDGE_LOOP('',(#174365,#174366,#174372,#174373)); +#174365 = ORIENTED_EDGE('',*,*,#174293,.F.); +#174366 = ORIENTED_EDGE('',*,*,#174367,.T.); +#174367 = EDGE_CURVE('',#174286,#174342,#174368,.T.); +#174368 = LINE('',#174369,#174370); +#174369 = CARTESIAN_POINT('',(-0.85,0.1,0.)); +#174370 = VECTOR('',#174371,1.); +#174371 = DIRECTION('',(0.,0.,-1.)); +#174372 = ORIENTED_EDGE('',*,*,#174341,.F.); +#174373 = ORIENTED_EDGE('',*,*,#174317,.F.); +#174374 = PLANE('',#174375); +#174375 = AXIS2_PLACEMENT_3D('',#174376,#174377,#174378); +#174376 = CARTESIAN_POINT('',(0.,0.1,0.)); +#174377 = DIRECTION('',(0.,1.,0.)); +#174378 = DIRECTION('',(0.,-0.,1.)); +#174379 = ADVANCED_FACE('',(#174380),#174396,.F.); +#174380 = FACE_BOUND('',#174381,.T.); +#174381 = EDGE_LOOP('',(#174382,#174383,#174389,#174390)); +#174382 = ORIENTED_EDGE('',*,*,#173385,.T.); +#174383 = ORIENTED_EDGE('',*,*,#174384,.T.); +#174384 = EDGE_CURVE('',#171907,#172937,#174385,.T.); +#174385 = LINE('',#174386,#174387); +#174386 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174387 = VECTOR('',#174388,1.); +#174388 = DIRECTION('',(-0.,-0.,1.)); +#174389 = ORIENTED_EDGE('',*,*,#172960,.T.); +#174390 = ORIENTED_EDGE('',*,*,#174391,.F.); +#174391 = EDGE_CURVE('',#173386,#172953,#174392,.T.); +#174392 = LINE('',#174393,#174394); +#174393 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174394 = VECTOR('',#174395,1.); +#174395 = DIRECTION('',(-0.,-0.,1.)); +#174396 = PLANE('',#174397); +#174397 = AXIS2_PLACEMENT_3D('',#174398,#174399,#174400); +#174398 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174399 = DIRECTION('',(0.,-1.,0.)); +#174400 = DIRECTION('',(0.,-0.,-1.)); +#174401 = ADVANCED_FACE('',(#174402),#174418,.F.); +#174402 = FACE_BOUND('',#174403,.T.); +#174403 = EDGE_LOOP('',(#174404,#174405,#174411,#174412)); +#174404 = ORIENTED_EDGE('',*,*,#173449,.T.); +#174405 = ORIENTED_EDGE('',*,*,#174406,.F.); +#174406 = EDGE_CURVE('',#173486,#173442,#174407,.T.); +#174407 = LINE('',#174408,#174409); +#174408 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174409 = VECTOR('',#174410,1.); +#174410 = DIRECTION('',(-0.,-0.,1.)); +#174411 = ORIENTED_EDGE('',*,*,#173485,.T.); +#174412 = ORIENTED_EDGE('',*,*,#174413,.T.); +#174413 = EDGE_CURVE('',#171947,#171897,#174414,.T.); +#174414 = LINE('',#174415,#174416); +#174415 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174416 = VECTOR('',#174417,1.); +#174417 = DIRECTION('',(-0.,-0.,1.)); +#174418 = PLANE('',#174419); +#174419 = AXIS2_PLACEMENT_3D('',#174420,#174421,#174422); +#174420 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174421 = DIRECTION('',(0.,-1.,0.)); +#174422 = DIRECTION('',(0.,-0.,-1.)); +#174423 = ADVANCED_FACE('',(#174424),#174440,.F.); +#174424 = FACE_BOUND('',#174425,.T.); +#174425 = EDGE_LOOP('',(#174426,#174427,#174433,#174434)); +#174426 = ORIENTED_EDGE('',*,*,#173585,.T.); +#174427 = ORIENTED_EDGE('',*,*,#174428,.T.); +#174428 = EDGE_CURVE('',#171987,#172217,#174429,.T.); +#174429 = LINE('',#174430,#174431); +#174430 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174431 = VECTOR('',#174432,1.); +#174432 = DIRECTION('',(-0.,-0.,1.)); +#174433 = ORIENTED_EDGE('',*,*,#174249,.T.); +#174434 = ORIENTED_EDGE('',*,*,#174435,.F.); +#174435 = EDGE_CURVE('',#173586,#174242,#174436,.T.); +#174436 = LINE('',#174437,#174438); +#174437 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174438 = VECTOR('',#174439,1.); +#174439 = DIRECTION('',(-0.,-0.,1.)); +#174440 = PLANE('',#174441); +#174441 = AXIS2_PLACEMENT_3D('',#174442,#174443,#174444); +#174442 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174443 = DIRECTION('',(0.,-1.,0.)); +#174444 = DIRECTION('',(0.,-0.,-1.)); +#174445 = ADVANCED_FACE('',(#174446),#174462,.F.); +#174446 = FACE_BOUND('',#174447,.T.); +#174447 = EDGE_LOOP('',(#174448,#174449,#174455,#174456)); +#174448 = ORIENTED_EDGE('',*,*,#174185,.T.); +#174449 = ORIENTED_EDGE('',*,*,#174450,.T.); +#174450 = EDGE_CURVE('',#172227,#172257,#174451,.T.); +#174451 = LINE('',#174452,#174453); +#174452 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174453 = VECTOR('',#174454,1.); +#174454 = DIRECTION('',(-0.,-0.,1.)); +#174455 = ORIENTED_EDGE('',*,*,#174349,.F.); +#174456 = ORIENTED_EDGE('',*,*,#174457,.F.); +#174457 = EDGE_CURVE('',#174186,#174342,#174458,.T.); +#174458 = LINE('',#174459,#174460); +#174459 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174460 = VECTOR('',#174461,1.); +#174461 = DIRECTION('',(-0.,-0.,1.)); +#174462 = PLANE('',#174463); +#174463 = AXIS2_PLACEMENT_3D('',#174464,#174465,#174466); +#174464 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174465 = DIRECTION('',(0.,-1.,0.)); +#174466 = DIRECTION('',(0.,-0.,-1.)); +#174467 = ADVANCED_FACE('',(#174468),#174484,.F.); +#174468 = FACE_BOUND('',#174469,.T.); +#174469 = EDGE_LOOP('',(#174470,#174471,#174477,#174478)); +#174470 = ORIENTED_EDGE('',*,*,#173549,.T.); +#174471 = ORIENTED_EDGE('',*,*,#174472,.F.); +#174472 = EDGE_CURVE('',#174286,#173542,#174473,.T.); +#174473 = LINE('',#174474,#174475); +#174474 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174475 = VECTOR('',#174476,1.); +#174476 = DIRECTION('',(-0.,-0.,1.)); +#174477 = ORIENTED_EDGE('',*,*,#174285,.F.); +#174478 = ORIENTED_EDGE('',*,*,#174479,.T.); +#174479 = EDGE_CURVE('',#172267,#171937,#174480,.T.); +#174480 = LINE('',#174481,#174482); +#174481 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174482 = VECTOR('',#174483,1.); +#174483 = DIRECTION('',(-0.,-0.,1.)); +#174484 = PLANE('',#174485); +#174485 = AXIS2_PLACEMENT_3D('',#174486,#174487,#174488); +#174486 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174487 = DIRECTION('',(0.,-1.,0.)); +#174488 = DIRECTION('',(0.,-0.,-1.)); +#174489 = ADVANCED_FACE('',(#174490),#174516,.F.); +#174490 = FACE_BOUND('',#174491,.T.); +#174491 = EDGE_LOOP('',(#174492,#174493,#174494,#174495,#174496,#174497, + #174498,#174499,#174500,#174501,#174502,#174503,#174509,#174510)); +#174492 = ORIENTED_EDGE('',*,*,#172934,.T.); +#174493 = ORIENTED_EDGE('',*,*,#174384,.F.); +#174494 = ORIENTED_EDGE('',*,*,#171906,.F.); +#174495 = ORIENTED_EDGE('',*,*,#174413,.F.); +#174496 = ORIENTED_EDGE('',*,*,#171946,.F.); +#174497 = ORIENTED_EDGE('',*,*,#174479,.F.); +#174498 = ORIENTED_EDGE('',*,*,#172266,.F.); +#174499 = ORIENTED_EDGE('',*,*,#174450,.F.); +#174500 = ORIENTED_EDGE('',*,*,#172226,.F.); +#174501 = ORIENTED_EDGE('',*,*,#174428,.F.); +#174502 = ORIENTED_EDGE('',*,*,#171986,.F.); +#174503 = ORIENTED_EDGE('',*,*,#174504,.F.); +#174504 = EDGE_CURVE('',#173090,#171977,#174505,.T.); +#174505 = LINE('',#174506,#174507); +#174506 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174507 = VECTOR('',#174508,1.); +#174508 = DIRECTION('',(-0.,-0.,1.)); +#174509 = ORIENTED_EDGE('',*,*,#173087,.F.); +#174510 = ORIENTED_EDGE('',*,*,#174511,.T.); +#174511 = EDGE_CURVE('',#173088,#172935,#174512,.T.); +#174512 = LINE('',#174513,#174514); +#174513 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#174514 = VECTOR('',#174515,1.); +#174515 = DIRECTION('',(-0.,-0.,1.)); +#174516 = PLANE('',#174517); +#174517 = AXIS2_PLACEMENT_3D('',#174518,#174519,#174520); +#174518 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#174519 = DIRECTION('',(-1.,0.,-0.)); +#174520 = DIRECTION('',(0.,0.,1.)); +#174521 = ADVANCED_FACE('',(#174522),#174533,.F.); +#174522 = FACE_BOUND('',#174523,.T.); +#174523 = EDGE_LOOP('',(#174524,#174525,#174526,#174527)); +#174524 = ORIENTED_EDGE('',*,*,#172944,.T.); +#174525 = ORIENTED_EDGE('',*,*,#174511,.F.); +#174526 = ORIENTED_EDGE('',*,*,#173113,.F.); +#174527 = ORIENTED_EDGE('',*,*,#174528,.T.); +#174528 = EDGE_CURVE('',#173106,#172945,#174529,.T.); +#174529 = LINE('',#174530,#174531); +#174530 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#174531 = VECTOR('',#174532,1.); +#174532 = DIRECTION('',(-0.,-0.,1.)); +#174533 = PLANE('',#174534); +#174534 = AXIS2_PLACEMENT_3D('',#174535,#174536,#174537); +#174535 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#174536 = DIRECTION('',(-0.,1.,0.)); +#174537 = DIRECTION('',(0.,0.,1.)); +#174538 = ADVANCED_FACE('',(#174539),#174560,.F.); +#174539 = FACE_BOUND('',#174540,.T.); +#174540 = EDGE_LOOP('',(#174541,#174542,#174543,#174544,#174550,#174551, + #174552,#174553,#174554,#174555,#174556,#174557,#174558,#174559)); +#174541 = ORIENTED_EDGE('',*,*,#172952,.T.); +#174542 = ORIENTED_EDGE('',*,*,#174528,.F.); +#174543 = ORIENTED_EDGE('',*,*,#173105,.F.); +#174544 = ORIENTED_EDGE('',*,*,#174545,.T.); +#174545 = EDGE_CURVE('',#173098,#173642,#174546,.T.); +#174546 = LINE('',#174547,#174548); +#174547 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#174548 = VECTOR('',#174549,1.); +#174549 = DIRECTION('',(-0.,-0.,1.)); +#174550 = ORIENTED_EDGE('',*,*,#173667,.T.); +#174551 = ORIENTED_EDGE('',*,*,#174435,.T.); +#174552 = ORIENTED_EDGE('',*,*,#174267,.T.); +#174553 = ORIENTED_EDGE('',*,*,#174457,.T.); +#174554 = ORIENTED_EDGE('',*,*,#174367,.F.); +#174555 = ORIENTED_EDGE('',*,*,#174472,.T.); +#174556 = ORIENTED_EDGE('',*,*,#173567,.T.); +#174557 = ORIENTED_EDGE('',*,*,#174406,.T.); +#174558 = ORIENTED_EDGE('',*,*,#173467,.T.); +#174559 = ORIENTED_EDGE('',*,*,#174391,.T.); +#174560 = PLANE('',#174561); +#174561 = AXIS2_PLACEMENT_3D('',#174562,#174563,#174564); +#174562 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#174563 = DIRECTION('',(1.,0.,0.)); +#174564 = DIRECTION('',(0.,0.,-1.)); +#174565 = ADVANCED_FACE('',(#174566),#174572,.F.); +#174566 = FACE_BOUND('',#174567,.T.); +#174567 = EDGE_LOOP('',(#174568,#174569,#174570,#174571)); +#174568 = ORIENTED_EDGE('',*,*,#173649,.T.); +#174569 = ORIENTED_EDGE('',*,*,#174545,.F.); +#174570 = ORIENTED_EDGE('',*,*,#173097,.F.); +#174571 = ORIENTED_EDGE('',*,*,#174504,.T.); +#174572 = PLANE('',#174573); +#174573 = AXIS2_PLACEMENT_3D('',#174574,#174575,#174576); +#174574 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#174575 = DIRECTION('',(0.,-1.,0.)); +#174576 = DIRECTION('',(0.,-0.,-1.)); +#174577 = ADVANCED_FACE('',(#174578),#174594,.F.); +#174578 = FACE_BOUND('',#174579,.T.); +#174579 = EDGE_LOOP('',(#174580,#174581,#174587,#174588)); +#174580 = ORIENTED_EDGE('',*,*,#173723,.T.); +#174581 = ORIENTED_EDGE('',*,*,#174582,.T.); +#174582 = EDGE_CURVE('',#173716,#173843,#174583,.T.); +#174583 = LINE('',#174584,#174585); +#174584 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174585 = VECTOR('',#174586,1.); +#174586 = DIRECTION('',(-0.,-0.,1.)); +#174587 = ORIENTED_EDGE('',*,*,#173842,.T.); +#174588 = ORIENTED_EDGE('',*,*,#174589,.F.); +#174589 = EDGE_CURVE('',#172017,#172067,#174590,.T.); +#174590 = LINE('',#174591,#174592); +#174591 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174592 = VECTOR('',#174593,1.); +#174593 = DIRECTION('',(-0.,-0.,1.)); +#174594 = PLANE('',#174595); +#174595 = AXIS2_PLACEMENT_3D('',#174596,#174597,#174598); +#174596 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174597 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174598 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174599 = ADVANCED_FACE('',(#174600),#174616,.F.); +#174600 = FACE_BOUND('',#174601,.T.); +#174601 = EDGE_LOOP('',(#174602,#174603,#174609,#174610)); +#174602 = ORIENTED_EDGE('',*,*,#173823,.T.); +#174603 = ORIENTED_EDGE('',*,*,#174604,.T.); +#174604 = EDGE_CURVE('',#173816,#173943,#174605,.T.); +#174605 = LINE('',#174606,#174607); +#174606 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174607 = VECTOR('',#174608,1.); +#174608 = DIRECTION('',(-0.,-0.,1.)); +#174609 = ORIENTED_EDGE('',*,*,#173942,.T.); +#174610 = ORIENTED_EDGE('',*,*,#174611,.F.); +#174611 = EDGE_CURVE('',#172057,#172107,#174612,.T.); +#174612 = LINE('',#174613,#174614); +#174613 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174614 = VECTOR('',#174615,1.); +#174615 = DIRECTION('',(-0.,-0.,1.)); +#174616 = PLANE('',#174617); +#174617 = AXIS2_PLACEMENT_3D('',#174618,#174619,#174620); +#174618 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174619 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174620 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174621 = ADVANCED_FACE('',(#174622),#174638,.F.); +#174622 = FACE_BOUND('',#174623,.T.); +#174623 = EDGE_LOOP('',(#174624,#174625,#174631,#174632)); +#174624 = ORIENTED_EDGE('',*,*,#173923,.T.); +#174625 = ORIENTED_EDGE('',*,*,#174626,.T.); +#174626 = EDGE_CURVE('',#173916,#174043,#174627,.T.); +#174627 = LINE('',#174628,#174629); +#174628 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174629 = VECTOR('',#174630,1.); +#174630 = DIRECTION('',(-0.,-0.,1.)); +#174631 = ORIENTED_EDGE('',*,*,#174042,.T.); +#174632 = ORIENTED_EDGE('',*,*,#174633,.F.); +#174633 = EDGE_CURVE('',#172097,#172147,#174634,.T.); +#174634 = LINE('',#174635,#174636); +#174635 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174636 = VECTOR('',#174637,1.); +#174637 = DIRECTION('',(-0.,-0.,1.)); +#174638 = PLANE('',#174639); +#174639 = AXIS2_PLACEMENT_3D('',#174640,#174641,#174642); +#174640 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174641 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174642 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174643 = ADVANCED_FACE('',(#174644),#174660,.F.); +#174644 = FACE_BOUND('',#174645,.T.); +#174645 = EDGE_LOOP('',(#174646,#174647,#174653,#174654)); +#174646 = ORIENTED_EDGE('',*,*,#174023,.T.); +#174647 = ORIENTED_EDGE('',*,*,#174648,.T.); +#174648 = EDGE_CURVE('',#174016,#174143,#174649,.T.); +#174649 = LINE('',#174650,#174651); +#174650 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174651 = VECTOR('',#174652,1.); +#174652 = DIRECTION('',(-0.,-0.,1.)); +#174653 = ORIENTED_EDGE('',*,*,#174142,.F.); +#174654 = ORIENTED_EDGE('',*,*,#174655,.F.); +#174655 = EDGE_CURVE('',#172137,#172187,#174656,.T.); +#174656 = LINE('',#174657,#174658); +#174657 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174658 = VECTOR('',#174659,1.); +#174659 = DIRECTION('',(-0.,-0.,1.)); +#174660 = PLANE('',#174661); +#174661 = AXIS2_PLACEMENT_3D('',#174662,#174663,#174664); +#174662 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174663 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174664 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174665 = ADVANCED_FACE('',(#174666),#174682,.F.); +#174666 = FACE_BOUND('',#174667,.T.); +#174667 = EDGE_LOOP('',(#174668,#174669,#174675,#174676)); +#174668 = ORIENTED_EDGE('',*,*,#174123,.F.); +#174669 = ORIENTED_EDGE('',*,*,#174670,.T.); +#174670 = EDGE_CURVE('',#174116,#172987,#174671,.T.); +#174671 = LINE('',#174672,#174673); +#174672 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174673 = VECTOR('',#174674,1.); +#174674 = DIRECTION('',(-0.,-0.,1.)); +#174675 = ORIENTED_EDGE('',*,*,#172986,.T.); +#174676 = ORIENTED_EDGE('',*,*,#174677,.F.); +#174677 = EDGE_CURVE('',#172177,#172979,#174678,.T.); +#174678 = LINE('',#174679,#174680); +#174679 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174680 = VECTOR('',#174681,1.); +#174681 = DIRECTION('',(-0.,-0.,1.)); +#174682 = PLANE('',#174683); +#174683 = AXIS2_PLACEMENT_3D('',#174684,#174685,#174686); +#174684 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174685 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174686 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174687 = ADVANCED_FACE('',(#174688),#174704,.F.); +#174688 = FACE_BOUND('',#174689,.T.); +#174689 = EDGE_LOOP('',(#174690,#174691,#174697,#174698)); +#174690 = ORIENTED_EDGE('',*,*,#172968,.T.); +#174691 = ORIENTED_EDGE('',*,*,#174692,.F.); +#174692 = EDGE_CURVE('',#173124,#172971,#174693,.T.); +#174693 = LINE('',#174694,#174695); +#174694 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#174695 = VECTOR('',#174696,1.); +#174696 = DIRECTION('',(-0.,-0.,1.)); +#174697 = ORIENTED_EDGE('',*,*,#173121,.F.); +#174698 = ORIENTED_EDGE('',*,*,#174699,.T.); +#174699 = EDGE_CURVE('',#173122,#172969,#174700,.T.); +#174700 = LINE('',#174701,#174702); +#174701 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#174702 = VECTOR('',#174703,1.); +#174703 = DIRECTION('',(-0.,-0.,1.)); +#174704 = PLANE('',#174705); +#174705 = AXIS2_PLACEMENT_3D('',#174706,#174707,#174708); +#174706 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#174707 = DIRECTION('',(1.084202172486E-15,1.,0.)); +#174708 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#174709 = ADVANCED_FACE('',(#174710),#174731,.F.); +#174710 = FACE_BOUND('',#174711,.T.); +#174711 = EDGE_LOOP('',(#174712,#174713,#174714,#174715,#174721,#174722, + #174723,#174724,#174725,#174726,#174727,#174728,#174729,#174730)); +#174712 = ORIENTED_EDGE('',*,*,#172978,.T.); +#174713 = ORIENTED_EDGE('',*,*,#174699,.F.); +#174714 = ORIENTED_EDGE('',*,*,#173147,.F.); +#174715 = ORIENTED_EDGE('',*,*,#174716,.T.); +#174716 = EDGE_CURVE('',#173140,#172027,#174717,.T.); +#174717 = LINE('',#174718,#174719); +#174718 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174719 = VECTOR('',#174720,1.); +#174720 = DIRECTION('',(-0.,-0.,1.)); +#174721 = ORIENTED_EDGE('',*,*,#172026,.T.); +#174722 = ORIENTED_EDGE('',*,*,#174589,.T.); +#174723 = ORIENTED_EDGE('',*,*,#172066,.T.); +#174724 = ORIENTED_EDGE('',*,*,#174611,.T.); +#174725 = ORIENTED_EDGE('',*,*,#172106,.T.); +#174726 = ORIENTED_EDGE('',*,*,#174633,.T.); +#174727 = ORIENTED_EDGE('',*,*,#172146,.T.); +#174728 = ORIENTED_EDGE('',*,*,#174655,.T.); +#174729 = ORIENTED_EDGE('',*,*,#172186,.F.); +#174730 = ORIENTED_EDGE('',*,*,#174677,.T.); +#174731 = PLANE('',#174732); +#174732 = AXIS2_PLACEMENT_3D('',#174733,#174734,#174735); +#174733 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#174734 = DIRECTION('',(1.,-2.168404344971E-15,0.)); +#174735 = DIRECTION('',(2.168404344971E-15,1.,0.)); +#174736 = ADVANCED_FACE('',(#174737),#174748,.F.); +#174737 = FACE_BOUND('',#174738,.T.); +#174738 = EDGE_LOOP('',(#174739,#174740,#174741,#174742)); +#174739 = ORIENTED_EDGE('',*,*,#173742,.T.); +#174740 = ORIENTED_EDGE('',*,*,#174716,.F.); +#174741 = ORIENTED_EDGE('',*,*,#173139,.F.); +#174742 = ORIENTED_EDGE('',*,*,#174743,.T.); +#174743 = EDGE_CURVE('',#173132,#173743,#174744,.T.); +#174744 = LINE('',#174745,#174746); +#174745 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#174746 = VECTOR('',#174747,1.); +#174747 = DIRECTION('',(-0.,-0.,1.)); +#174748 = PLANE('',#174749); +#174749 = AXIS2_PLACEMENT_3D('',#174750,#174751,#174752); +#174750 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#174751 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174752 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#174753 = ADVANCED_FACE('',(#174754),#174770,.F.); +#174754 = FACE_BOUND('',#174755,.T.); +#174755 = EDGE_LOOP('',(#174756,#174757,#174758,#174759,#174760,#174761, + #174762,#174763,#174764,#174765,#174766,#174767,#174768,#174769)); +#174756 = ORIENTED_EDGE('',*,*,#172994,.T.); +#174757 = ORIENTED_EDGE('',*,*,#174670,.F.); +#174758 = ORIENTED_EDGE('',*,*,#174167,.F.); +#174759 = ORIENTED_EDGE('',*,*,#174648,.F.); +#174760 = ORIENTED_EDGE('',*,*,#174067,.F.); +#174761 = ORIENTED_EDGE('',*,*,#174626,.F.); +#174762 = ORIENTED_EDGE('',*,*,#173967,.F.); +#174763 = ORIENTED_EDGE('',*,*,#174604,.F.); +#174764 = ORIENTED_EDGE('',*,*,#173867,.F.); +#174765 = ORIENTED_EDGE('',*,*,#174582,.F.); +#174766 = ORIENTED_EDGE('',*,*,#173767,.F.); +#174767 = ORIENTED_EDGE('',*,*,#174743,.F.); +#174768 = ORIENTED_EDGE('',*,*,#173131,.F.); +#174769 = ORIENTED_EDGE('',*,*,#174692,.T.); +#174770 = PLANE('',#174771); +#174771 = AXIS2_PLACEMENT_3D('',#174772,#174773,#174774); +#174772 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#174773 = DIRECTION('',(-1.,2.168404344971E-15,0.)); +#174774 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#174775 = ADVANCED_FACE('',(#174776),#174801,.F.); +#174776 = FACE_BOUND('',#174777,.T.); +#174777 = EDGE_LOOP('',(#174778,#174784,#174785,#174791,#174792,#174798, + #174799,#174800)); +#174778 = ORIENTED_EDGE('',*,*,#174779,.T.); +#174779 = EDGE_CURVE('',#171875,#173021,#174780,.T.); +#174780 = LINE('',#174781,#174782); +#174781 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#174782 = VECTOR('',#174783,1.); +#174783 = DIRECTION('',(-0.,-0.,1.)); +#174784 = ORIENTED_EDGE('',*,*,#173020,.T.); +#174785 = ORIENTED_EDGE('',*,*,#174786,.F.); +#174786 = EDGE_CURVE('',#173174,#173013,#174787,.T.); +#174787 = LINE('',#174788,#174789); +#174788 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#174789 = VECTOR('',#174790,1.); +#174790 = DIRECTION('',(-0.,-0.,1.)); +#174791 = ORIENTED_EDGE('',*,*,#173173,.F.); +#174792 = ORIENTED_EDGE('',*,*,#174793,.T.); +#174793 = EDGE_CURVE('',#173166,#171867,#174794,.T.); +#174794 = LINE('',#174795,#174796); +#174795 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#174796 = VECTOR('',#174797,1.); +#174797 = DIRECTION('',(-0.,-0.,1.)); +#174798 = ORIENTED_EDGE('',*,*,#173288,.F.); +#174799 = ORIENTED_EDGE('',*,*,#173264,.F.); +#174800 = ORIENTED_EDGE('',*,*,#173367,.F.); +#174801 = PLANE('',#174802); +#174802 = AXIS2_PLACEMENT_3D('',#174803,#174804,#174805); +#174803 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#174804 = DIRECTION('',(-1.264902534566E-15,-1.,0.)); +#174805 = DIRECTION('',(1.,-1.264902534566E-15,0.)); +#174806 = ADVANCED_FACE('',(#174807),#174823,.F.); +#174807 = FACE_BOUND('',#174808,.T.); +#174808 = EDGE_LOOP('',(#174809,#174810,#174816,#174817)); +#174809 = ORIENTED_EDGE('',*,*,#173002,.T.); +#174810 = ORIENTED_EDGE('',*,*,#174811,.F.); +#174811 = EDGE_CURVE('',#173158,#173005,#174812,.T.); +#174812 = LINE('',#174813,#174814); +#174813 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#174814 = VECTOR('',#174815,1.); +#174815 = DIRECTION('',(-0.,-0.,1.)); +#174816 = ORIENTED_EDGE('',*,*,#173155,.F.); +#174817 = ORIENTED_EDGE('',*,*,#174818,.T.); +#174818 = EDGE_CURVE('',#173156,#173003,#174819,.T.); +#174819 = LINE('',#174820,#174821); +#174820 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#174821 = VECTOR('',#174822,1.); +#174822 = DIRECTION('',(-0.,-0.,1.)); +#174823 = PLANE('',#174824); +#174824 = AXIS2_PLACEMENT_3D('',#174825,#174826,#174827); +#174825 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#174826 = DIRECTION('',(1.264902534566E-15,1.,0.)); +#174827 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#174828 = ADVANCED_FACE('',(#174829),#174835,.F.); +#174829 = FACE_BOUND('',#174830,.T.); +#174830 = EDGE_LOOP('',(#174831,#174832,#174833,#174834)); +#174831 = ORIENTED_EDGE('',*,*,#173012,.T.); +#174832 = ORIENTED_EDGE('',*,*,#174818,.F.); +#174833 = ORIENTED_EDGE('',*,*,#173181,.F.); +#174834 = ORIENTED_EDGE('',*,*,#174786,.T.); +#174835 = PLANE('',#174836); +#174836 = AXIS2_PLACEMENT_3D('',#174837,#174838,#174839); +#174837 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#174838 = DIRECTION('',(1.,-2.168404344971E-15,0.)); +#174839 = DIRECTION('',(2.168404344971E-15,1.,0.)); +#174840 = ADVANCED_FACE('',(#174841),#174849,.F.); +#174841 = FACE_BOUND('',#174842,.T.); +#174842 = EDGE_LOOP('',(#174843,#174844,#174845,#174846,#174847,#174848) + ); +#174843 = ORIENTED_EDGE('',*,*,#173028,.T.); +#174844 = ORIENTED_EDGE('',*,*,#174779,.F.); +#174845 = ORIENTED_EDGE('',*,*,#171874,.F.); +#174846 = ORIENTED_EDGE('',*,*,#174793,.F.); +#174847 = ORIENTED_EDGE('',*,*,#173165,.F.); +#174848 = ORIENTED_EDGE('',*,*,#174811,.T.); +#174849 = PLANE('',#174850); +#174850 = AXIS2_PLACEMENT_3D('',#174851,#174852,#174853); +#174851 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#174852 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#174853 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#174854 = ADVANCED_FACE('',(#174855),#174880,.F.); +#174855 = FACE_BOUND('',#174856,.T.); +#174856 = EDGE_LOOP('',(#174857,#174858,#174859,#174865,#174866,#174872, + #174873,#174879)); +#174857 = ORIENTED_EDGE('',*,*,#173336,.F.); +#174858 = ORIENTED_EDGE('',*,*,#173312,.F.); +#174859 = ORIENTED_EDGE('',*,*,#174860,.F.); +#174860 = EDGE_CURVE('',#173064,#171849,#174861,.T.); +#174861 = LINE('',#174862,#174863); +#174862 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#174863 = VECTOR('',#174864,1.); +#174864 = DIRECTION('',(-0.,-0.,1.)); +#174865 = ORIENTED_EDGE('',*,*,#173063,.F.); +#174866 = ORIENTED_EDGE('',*,*,#174867,.T.); +#174867 = EDGE_CURVE('',#173056,#172903,#174868,.T.); +#174868 = LINE('',#174869,#174870); +#174869 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#174870 = VECTOR('',#174871,1.); +#174871 = DIRECTION('',(-0.,-0.,1.)); +#174872 = ORIENTED_EDGE('',*,*,#172926,.T.); +#174873 = ORIENTED_EDGE('',*,*,#174874,.F.); +#174874 = EDGE_CURVE('',#171851,#172919,#174875,.T.); +#174875 = LINE('',#174876,#174877); +#174876 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#174877 = VECTOR('',#174878,1.); +#174878 = DIRECTION('',(-0.,-0.,1.)); +#174879 = ORIENTED_EDGE('',*,*,#173360,.F.); +#174880 = PLANE('',#174881); +#174881 = AXIS2_PLACEMENT_3D('',#174882,#174883,#174884); +#174882 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#174883 = DIRECTION('',(1.807003620809E-16,-1.,0.)); +#174884 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#174885 = ADVANCED_FACE('',(#174886),#174897,.F.); +#174886 = FACE_BOUND('',#174887,.T.); +#174887 = EDGE_LOOP('',(#174888,#174889,#174890,#174891)); +#174888 = ORIENTED_EDGE('',*,*,#172900,.T.); +#174889 = ORIENTED_EDGE('',*,*,#174867,.F.); +#174890 = ORIENTED_EDGE('',*,*,#173053,.F.); +#174891 = ORIENTED_EDGE('',*,*,#174892,.T.); +#174892 = EDGE_CURVE('',#173054,#172901,#174893,.T.); +#174893 = LINE('',#174894,#174895); +#174894 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174895 = VECTOR('',#174896,1.); +#174896 = DIRECTION('',(-0.,-0.,1.)); +#174897 = PLANE('',#174898); +#174898 = AXIS2_PLACEMENT_3D('',#174899,#174900,#174901); +#174899 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174900 = DIRECTION('',(-1.,0.,-0.)); +#174901 = DIRECTION('',(0.,0.,1.)); +#174902 = ADVANCED_FACE('',(#174903),#174914,.F.); +#174903 = FACE_BOUND('',#174904,.T.); +#174904 = EDGE_LOOP('',(#174905,#174906,#174907,#174908)); +#174905 = ORIENTED_EDGE('',*,*,#172910,.T.); +#174906 = ORIENTED_EDGE('',*,*,#174892,.F.); +#174907 = ORIENTED_EDGE('',*,*,#173079,.F.); +#174908 = ORIENTED_EDGE('',*,*,#174909,.T.); +#174909 = EDGE_CURVE('',#173072,#172911,#174910,.T.); +#174910 = LINE('',#174911,#174912); +#174911 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#174912 = VECTOR('',#174913,1.); +#174913 = DIRECTION('',(-0.,-0.,1.)); +#174914 = PLANE('',#174915); +#174915 = AXIS2_PLACEMENT_3D('',#174916,#174917,#174918); +#174916 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174917 = DIRECTION('',(-1.807003620809E-16,1.,0.)); +#174918 = DIRECTION('',(-1.,-1.807003620809E-16,0.)); +#174919 = ADVANCED_FACE('',(#174920),#174928,.F.); +#174920 = FACE_BOUND('',#174921,.T.); +#174921 = EDGE_LOOP('',(#174922,#174923,#174924,#174925,#174926,#174927) + ); +#174922 = ORIENTED_EDGE('',*,*,#172918,.T.); +#174923 = ORIENTED_EDGE('',*,*,#174909,.F.); +#174924 = ORIENTED_EDGE('',*,*,#173071,.F.); +#174925 = ORIENTED_EDGE('',*,*,#174860,.T.); +#174926 = ORIENTED_EDGE('',*,*,#171848,.T.); +#174927 = ORIENTED_EDGE('',*,*,#174874,.T.); +#174928 = PLANE('',#174929); +#174929 = AXIS2_PLACEMENT_3D('',#174930,#174931,#174932); +#174930 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#174931 = DIRECTION('',(1.,0.,0.)); +#174932 = DIRECTION('',(0.,0.,-1.)); +#174933 = MANIFOLD_SOLID_BREP('',#174934); +#174934 = CLOSED_SHELL('',(#174935,#174975,#175006,#175037,#175059, + #175071)); +#174935 = ADVANCED_FACE('',(#174936),#174970,.T.); +#174936 = FACE_BOUND('',#174937,.T.); +#174937 = EDGE_LOOP('',(#174938,#174948,#174956,#174964)); +#174938 = ORIENTED_EDGE('',*,*,#174939,.F.); +#174939 = EDGE_CURVE('',#174940,#174942,#174944,.T.); +#174940 = VERTEX_POINT('',#174941); +#174941 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#174942 = VERTEX_POINT('',#174943); +#174943 = CARTESIAN_POINT('',(-0.525,0.1,1.)); +#174944 = LINE('',#174945,#174946); +#174945 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#174946 = VECTOR('',#174947,1.); +#174947 = DIRECTION('',(0.,-1.,0.)); +#174948 = ORIENTED_EDGE('',*,*,#174949,.F.); +#174949 = EDGE_CURVE('',#174950,#174940,#174952,.T.); +#174950 = VERTEX_POINT('',#174951); +#174951 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174952 = LINE('',#174953,#174954); +#174953 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174954 = VECTOR('',#174955,1.); +#174955 = DIRECTION('',(0.,0.,1.)); +#174956 = ORIENTED_EDGE('',*,*,#174957,.T.); +#174957 = EDGE_CURVE('',#174950,#174958,#174960,.T.); +#174958 = VERTEX_POINT('',#174959); +#174959 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#174960 = LINE('',#174961,#174962); +#174961 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174962 = VECTOR('',#174963,1.); +#174963 = DIRECTION('',(0.,-1.,0.)); +#174964 = ORIENTED_EDGE('',*,*,#174965,.T.); +#174965 = EDGE_CURVE('',#174958,#174942,#174966,.T.); +#174966 = LINE('',#174967,#174968); +#174967 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#174968 = VECTOR('',#174969,1.); +#174969 = DIRECTION('',(0.,0.,1.)); +#174970 = PLANE('',#174971); +#174971 = AXIS2_PLACEMENT_3D('',#174972,#174973,#174974); +#174972 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174973 = DIRECTION('',(-1.,0.,0.)); +#174974 = DIRECTION('',(0.,0.,1.)); +#174975 = ADVANCED_FACE('',(#174976),#175001,.T.); +#174976 = FACE_BOUND('',#174977,.T.); +#174977 = EDGE_LOOP('',(#174978,#174986,#174994,#175000)); +#174978 = ORIENTED_EDGE('',*,*,#174979,.F.); +#174979 = EDGE_CURVE('',#174980,#174940,#174982,.T.); +#174980 = VERTEX_POINT('',#174981); +#174981 = CARTESIAN_POINT('',(-0.375,0.2,1.)); +#174982 = LINE('',#174983,#174984); +#174983 = CARTESIAN_POINT('',(-0.525,0.2,1.)); +#174984 = VECTOR('',#174985,1.); +#174985 = DIRECTION('',(-1.,-1.807003620809E-16,-0.)); +#174986 = ORIENTED_EDGE('',*,*,#174987,.F.); +#174987 = EDGE_CURVE('',#174988,#174980,#174990,.T.); +#174988 = VERTEX_POINT('',#174989); +#174989 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#174990 = LINE('',#174991,#174992); +#174991 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#174992 = VECTOR('',#174993,1.); +#174993 = DIRECTION('',(0.,0.,1.)); +#174994 = ORIENTED_EDGE('',*,*,#174995,.T.); +#174995 = EDGE_CURVE('',#174988,#174950,#174996,.T.); +#174996 = LINE('',#174997,#174998); +#174997 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#174998 = VECTOR('',#174999,1.); +#174999 = DIRECTION('',(-1.,-1.807003620809E-16,-0.)); +#175000 = ORIENTED_EDGE('',*,*,#174949,.T.); +#175001 = PLANE('',#175002); +#175002 = AXIS2_PLACEMENT_3D('',#175003,#175004,#175005); +#175003 = CARTESIAN_POINT('',(-0.525,0.2,-1.)); +#175004 = DIRECTION('',(-1.807003620809E-16,1.,0.)); +#175005 = DIRECTION('',(-1.,-1.807003620809E-16,0.)); +#175006 = ADVANCED_FACE('',(#175007),#175032,.T.); +#175007 = FACE_BOUND('',#175008,.T.); +#175008 = EDGE_LOOP('',(#175009,#175017,#175025,#175031)); +#175009 = ORIENTED_EDGE('',*,*,#175010,.F.); +#175010 = EDGE_CURVE('',#175011,#174980,#175013,.T.); +#175011 = VERTEX_POINT('',#175012); +#175012 = CARTESIAN_POINT('',(-0.375,0.1,1.)); +#175013 = LINE('',#175014,#175015); +#175014 = CARTESIAN_POINT('',(-0.375,0.2,1.)); +#175015 = VECTOR('',#175016,1.); +#175016 = DIRECTION('',(-0.,1.,-0.)); +#175017 = ORIENTED_EDGE('',*,*,#175018,.F.); +#175018 = EDGE_CURVE('',#175019,#175011,#175021,.T.); +#175019 = VERTEX_POINT('',#175020); +#175020 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#175021 = LINE('',#175022,#175023); +#175022 = CARTESIAN_POINT('',(-0.375,0.1,-1.)); +#175023 = VECTOR('',#175024,1.); +#175024 = DIRECTION('',(0.,0.,1.)); +#175025 = ORIENTED_EDGE('',*,*,#175026,.T.); +#175026 = EDGE_CURVE('',#175019,#174988,#175027,.T.); +#175027 = LINE('',#175028,#175029); +#175028 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#175029 = VECTOR('',#175030,1.); +#175030 = DIRECTION('',(-0.,1.,-0.)); +#175031 = ORIENTED_EDGE('',*,*,#174987,.T.); +#175032 = PLANE('',#175033); +#175033 = AXIS2_PLACEMENT_3D('',#175034,#175035,#175036); +#175034 = CARTESIAN_POINT('',(-0.375,0.2,-1.)); +#175035 = DIRECTION('',(1.,0.,-0.)); +#175036 = DIRECTION('',(-0.,0.,-1.)); +#175037 = ADVANCED_FACE('',(#175038),#175054,.T.); +#175038 = FACE_BOUND('',#175039,.T.); +#175039 = EDGE_LOOP('',(#175040,#175046,#175047,#175053)); +#175040 = ORIENTED_EDGE('',*,*,#175041,.F.); +#175041 = EDGE_CURVE('',#174942,#175011,#175042,.T.); +#175042 = LINE('',#175043,#175044); +#175043 = CARTESIAN_POINT('',(-0.525,0.1,1.)); +#175044 = VECTOR('',#175045,1.); +#175045 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#175046 = ORIENTED_EDGE('',*,*,#174965,.F.); +#175047 = ORIENTED_EDGE('',*,*,#175048,.T.); +#175048 = EDGE_CURVE('',#174958,#175019,#175049,.T.); +#175049 = LINE('',#175050,#175051); +#175050 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#175051 = VECTOR('',#175052,1.); +#175052 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#175053 = ORIENTED_EDGE('',*,*,#175018,.T.); +#175054 = PLANE('',#175055); +#175055 = AXIS2_PLACEMENT_3D('',#175056,#175057,#175058); +#175056 = CARTESIAN_POINT('',(-0.525,0.1,-1.)); +#175057 = DIRECTION('',(1.807003620809E-16,-1.,0.)); +#175058 = DIRECTION('',(1.,1.807003620809E-16,0.)); +#175059 = ADVANCED_FACE('',(#175060),#175066,.F.); +#175060 = FACE_BOUND('',#175061,.T.); +#175061 = EDGE_LOOP('',(#175062,#175063,#175064,#175065)); +#175062 = ORIENTED_EDGE('',*,*,#174957,.F.); +#175063 = ORIENTED_EDGE('',*,*,#174995,.F.); +#175064 = ORIENTED_EDGE('',*,*,#175026,.F.); +#175065 = ORIENTED_EDGE('',*,*,#175048,.F.); +#175066 = PLANE('',#175067); +#175067 = AXIS2_PLACEMENT_3D('',#175068,#175069,#175070); +#175068 = CARTESIAN_POINT('',(0.,0.,-1.)); +#175069 = DIRECTION('',(-0.,0.,1.)); +#175070 = DIRECTION('',(1.,0.,0.)); +#175071 = ADVANCED_FACE('',(#175072),#175078,.T.); +#175072 = FACE_BOUND('',#175073,.T.); +#175073 = EDGE_LOOP('',(#175074,#175075,#175076,#175077)); +#175074 = ORIENTED_EDGE('',*,*,#174939,.T.); +#175075 = ORIENTED_EDGE('',*,*,#175041,.T.); +#175076 = ORIENTED_EDGE('',*,*,#175010,.T.); +#175077 = ORIENTED_EDGE('',*,*,#174979,.T.); +#175078 = PLANE('',#175079); +#175079 = AXIS2_PLACEMENT_3D('',#175080,#175081,#175082); +#175080 = CARTESIAN_POINT('',(0.,0.,1.)); +#175081 = DIRECTION('',(-0.,0.,1.)); +#175082 = DIRECTION('',(1.,0.,0.)); +#175083 = MANIFOLD_SOLID_BREP('',#175084); +#175084 = CLOSED_SHELL('',(#175085,#175125,#175156,#175187,#175209, + #175221)); +#175085 = ADVANCED_FACE('',(#175086),#175120,.T.); +#175086 = FACE_BOUND('',#175087,.T.); +#175087 = EDGE_LOOP('',(#175088,#175098,#175106,#175114)); +#175088 = ORIENTED_EDGE('',*,*,#175089,.F.); +#175089 = EDGE_CURVE('',#175090,#175092,#175094,.T.); +#175090 = VERTEX_POINT('',#175091); +#175091 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#175092 = VERTEX_POINT('',#175093); +#175093 = CARTESIAN_POINT('',(-0.95,0.1,1.)); +#175094 = LINE('',#175095,#175096); +#175095 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#175096 = VECTOR('',#175097,1.); +#175097 = DIRECTION('',(0.,-1.,0.)); +#175098 = ORIENTED_EDGE('',*,*,#175099,.F.); +#175099 = EDGE_CURVE('',#175100,#175090,#175102,.T.); +#175100 = VERTEX_POINT('',#175101); +#175101 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175102 = LINE('',#175103,#175104); +#175103 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175104 = VECTOR('',#175105,1.); +#175105 = DIRECTION('',(0.,0.,1.)); +#175106 = ORIENTED_EDGE('',*,*,#175107,.T.); +#175107 = EDGE_CURVE('',#175100,#175108,#175110,.T.); +#175108 = VERTEX_POINT('',#175109); +#175109 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#175110 = LINE('',#175111,#175112); +#175111 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175112 = VECTOR('',#175113,1.); +#175113 = DIRECTION('',(0.,-1.,0.)); +#175114 = ORIENTED_EDGE('',*,*,#175115,.T.); +#175115 = EDGE_CURVE('',#175108,#175092,#175116,.T.); +#175116 = LINE('',#175117,#175118); +#175117 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#175118 = VECTOR('',#175119,1.); +#175119 = DIRECTION('',(0.,0.,1.)); +#175120 = PLANE('',#175121); +#175121 = AXIS2_PLACEMENT_3D('',#175122,#175123,#175124); +#175122 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175123 = DIRECTION('',(-1.,0.,0.)); +#175124 = DIRECTION('',(0.,0.,1.)); +#175125 = ADVANCED_FACE('',(#175126),#175151,.T.); +#175126 = FACE_BOUND('',#175127,.T.); +#175127 = EDGE_LOOP('',(#175128,#175136,#175144,#175150)); +#175128 = ORIENTED_EDGE('',*,*,#175129,.F.); +#175129 = EDGE_CURVE('',#175130,#175090,#175132,.T.); +#175130 = VERTEX_POINT('',#175131); +#175131 = CARTESIAN_POINT('',(-0.85,0.2,1.)); +#175132 = LINE('',#175133,#175134); +#175133 = CARTESIAN_POINT('',(-0.95,0.2,1.)); +#175134 = VECTOR('',#175135,1.); +#175135 = DIRECTION('',(-1.,-0.,-0.)); +#175136 = ORIENTED_EDGE('',*,*,#175137,.F.); +#175137 = EDGE_CURVE('',#175138,#175130,#175140,.T.); +#175138 = VERTEX_POINT('',#175139); +#175139 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#175140 = LINE('',#175141,#175142); +#175141 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#175142 = VECTOR('',#175143,1.); +#175143 = DIRECTION('',(0.,0.,1.)); +#175144 = ORIENTED_EDGE('',*,*,#175145,.T.); +#175145 = EDGE_CURVE('',#175138,#175100,#175146,.T.); +#175146 = LINE('',#175147,#175148); +#175147 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175148 = VECTOR('',#175149,1.); +#175149 = DIRECTION('',(-1.,-0.,-0.)); +#175150 = ORIENTED_EDGE('',*,*,#175099,.T.); +#175151 = PLANE('',#175152); +#175152 = AXIS2_PLACEMENT_3D('',#175153,#175154,#175155); +#175153 = CARTESIAN_POINT('',(-0.95,0.2,-1.)); +#175154 = DIRECTION('',(0.,1.,0.)); +#175155 = DIRECTION('',(0.,-0.,1.)); +#175156 = ADVANCED_FACE('',(#175157),#175182,.T.); +#175157 = FACE_BOUND('',#175158,.T.); +#175158 = EDGE_LOOP('',(#175159,#175167,#175175,#175181)); +#175159 = ORIENTED_EDGE('',*,*,#175160,.F.); +#175160 = EDGE_CURVE('',#175161,#175130,#175163,.T.); +#175161 = VERTEX_POINT('',#175162); +#175162 = CARTESIAN_POINT('',(-0.85,0.1,1.)); +#175163 = LINE('',#175164,#175165); +#175164 = CARTESIAN_POINT('',(-0.85,0.2,1.)); +#175165 = VECTOR('',#175166,1.); +#175166 = DIRECTION('',(-0.,1.,-0.)); +#175167 = ORIENTED_EDGE('',*,*,#175168,.F.); +#175168 = EDGE_CURVE('',#175169,#175161,#175171,.T.); +#175169 = VERTEX_POINT('',#175170); +#175170 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#175171 = LINE('',#175172,#175173); +#175172 = CARTESIAN_POINT('',(-0.85,0.1,-1.)); +#175173 = VECTOR('',#175174,1.); +#175174 = DIRECTION('',(0.,0.,1.)); +#175175 = ORIENTED_EDGE('',*,*,#175176,.T.); +#175176 = EDGE_CURVE('',#175169,#175138,#175177,.T.); +#175177 = LINE('',#175178,#175179); +#175178 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#175179 = VECTOR('',#175180,1.); +#175180 = DIRECTION('',(-0.,1.,-0.)); +#175181 = ORIENTED_EDGE('',*,*,#175137,.T.); +#175182 = PLANE('',#175183); +#175183 = AXIS2_PLACEMENT_3D('',#175184,#175185,#175186); +#175184 = CARTESIAN_POINT('',(-0.85,0.2,-1.)); +#175185 = DIRECTION('',(1.,0.,-0.)); +#175186 = DIRECTION('',(-0.,0.,-1.)); +#175187 = ADVANCED_FACE('',(#175188),#175204,.T.); +#175188 = FACE_BOUND('',#175189,.T.); +#175189 = EDGE_LOOP('',(#175190,#175196,#175197,#175203)); +#175190 = ORIENTED_EDGE('',*,*,#175191,.F.); +#175191 = EDGE_CURVE('',#175092,#175161,#175192,.T.); +#175192 = LINE('',#175193,#175194); +#175193 = CARTESIAN_POINT('',(-0.95,0.1,1.)); +#175194 = VECTOR('',#175195,1.); +#175195 = DIRECTION('',(1.,0.,0.)); +#175196 = ORIENTED_EDGE('',*,*,#175115,.F.); +#175197 = ORIENTED_EDGE('',*,*,#175198,.T.); +#175198 = EDGE_CURVE('',#175108,#175169,#175199,.T.); +#175199 = LINE('',#175200,#175201); +#175200 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#175201 = VECTOR('',#175202,1.); +#175202 = DIRECTION('',(1.,0.,0.)); +#175203 = ORIENTED_EDGE('',*,*,#175168,.T.); +#175204 = PLANE('',#175205); +#175205 = AXIS2_PLACEMENT_3D('',#175206,#175207,#175208); +#175206 = CARTESIAN_POINT('',(-0.95,0.1,-1.)); +#175207 = DIRECTION('',(0.,-1.,0.)); +#175208 = DIRECTION('',(0.,-0.,-1.)); +#175209 = ADVANCED_FACE('',(#175210),#175216,.F.); +#175210 = FACE_BOUND('',#175211,.T.); +#175211 = EDGE_LOOP('',(#175212,#175213,#175214,#175215)); +#175212 = ORIENTED_EDGE('',*,*,#175107,.F.); +#175213 = ORIENTED_EDGE('',*,*,#175145,.F.); +#175214 = ORIENTED_EDGE('',*,*,#175176,.F.); +#175215 = ORIENTED_EDGE('',*,*,#175198,.F.); +#175216 = PLANE('',#175217); +#175217 = AXIS2_PLACEMENT_3D('',#175218,#175219,#175220); +#175218 = CARTESIAN_POINT('',(0.,0.,-1.)); +#175219 = DIRECTION('',(-0.,0.,1.)); +#175220 = DIRECTION('',(1.,0.,0.)); +#175221 = ADVANCED_FACE('',(#175222),#175228,.T.); +#175222 = FACE_BOUND('',#175223,.T.); +#175223 = EDGE_LOOP('',(#175224,#175225,#175226,#175227)); +#175224 = ORIENTED_EDGE('',*,*,#175089,.T.); +#175225 = ORIENTED_EDGE('',*,*,#175191,.T.); +#175226 = ORIENTED_EDGE('',*,*,#175160,.T.); +#175227 = ORIENTED_EDGE('',*,*,#175129,.T.); +#175228 = PLANE('',#175229); +#175229 = AXIS2_PLACEMENT_3D('',#175230,#175231,#175232); +#175230 = CARTESIAN_POINT('',(0.,0.,1.)); +#175231 = DIRECTION('',(-0.,0.,1.)); +#175232 = DIRECTION('',(1.,0.,0.)); +#175233 = MANIFOLD_SOLID_BREP('',#175234); +#175234 = CLOSED_SHELL('',(#175235,#175275,#175306,#175337,#175359, + #175371)); +#175235 = ADVANCED_FACE('',(#175236),#175270,.T.); +#175236 = FACE_BOUND('',#175237,.T.); +#175237 = EDGE_LOOP('',(#175238,#175248,#175256,#175264)); +#175238 = ORIENTED_EDGE('',*,*,#175239,.F.); +#175239 = EDGE_CURVE('',#175240,#175242,#175244,.T.); +#175240 = VERTEX_POINT('',#175241); +#175241 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#175242 = VERTEX_POINT('',#175243); +#175243 = CARTESIAN_POINT('',(0.85,0.2,1.)); +#175244 = LINE('',#175245,#175246); +#175245 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#175246 = VECTOR('',#175247,1.); +#175247 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#175248 = ORIENTED_EDGE('',*,*,#175249,.F.); +#175249 = EDGE_CURVE('',#175250,#175240,#175252,.T.); +#175250 = VERTEX_POINT('',#175251); +#175251 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175252 = LINE('',#175253,#175254); +#175253 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175254 = VECTOR('',#175255,1.); +#175255 = DIRECTION('',(0.,0.,1.)); +#175256 = ORIENTED_EDGE('',*,*,#175257,.T.); +#175257 = EDGE_CURVE('',#175250,#175258,#175260,.T.); +#175258 = VERTEX_POINT('',#175259); +#175259 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#175260 = LINE('',#175261,#175262); +#175261 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175262 = VECTOR('',#175263,1.); +#175263 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#175264 = ORIENTED_EDGE('',*,*,#175265,.T.); +#175265 = EDGE_CURVE('',#175258,#175242,#175266,.T.); +#175266 = LINE('',#175267,#175268); +#175267 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#175268 = VECTOR('',#175269,1.); +#175269 = DIRECTION('',(0.,0.,1.)); +#175270 = PLANE('',#175271); +#175271 = AXIS2_PLACEMENT_3D('',#175272,#175273,#175274); +#175272 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175273 = DIRECTION('',(1.084202172486E-15,1.,-0.)); +#175274 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#175275 = ADVANCED_FACE('',(#175276),#175301,.T.); +#175276 = FACE_BOUND('',#175277,.T.); +#175277 = EDGE_LOOP('',(#175278,#175286,#175294,#175300)); +#175278 = ORIENTED_EDGE('',*,*,#175279,.F.); +#175279 = EDGE_CURVE('',#175280,#175240,#175282,.T.); +#175280 = VERTEX_POINT('',#175281); +#175281 = CARTESIAN_POINT('',(0.95,1.E-01,1.)); +#175282 = LINE('',#175283,#175284); +#175283 = CARTESIAN_POINT('',(0.95,0.2,1.)); +#175284 = VECTOR('',#175285,1.); +#175285 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#175286 = ORIENTED_EDGE('',*,*,#175287,.F.); +#175287 = EDGE_CURVE('',#175288,#175280,#175290,.T.); +#175288 = VERTEX_POINT('',#175289); +#175289 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#175290 = LINE('',#175291,#175292); +#175291 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#175292 = VECTOR('',#175293,1.); +#175293 = DIRECTION('',(0.,0.,1.)); +#175294 = ORIENTED_EDGE('',*,*,#175295,.T.); +#175295 = EDGE_CURVE('',#175288,#175250,#175296,.T.); +#175296 = LINE('',#175297,#175298); +#175297 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175298 = VECTOR('',#175299,1.); +#175299 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#175300 = ORIENTED_EDGE('',*,*,#175249,.T.); +#175301 = PLANE('',#175302); +#175302 = AXIS2_PLACEMENT_3D('',#175303,#175304,#175305); +#175303 = CARTESIAN_POINT('',(0.95,0.2,-1.)); +#175304 = DIRECTION('',(1.,-2.168404344971E-15,0.)); +#175305 = DIRECTION('',(2.168404344971E-15,1.,0.)); +#175306 = ADVANCED_FACE('',(#175307),#175332,.T.); +#175307 = FACE_BOUND('',#175308,.T.); +#175308 = EDGE_LOOP('',(#175309,#175317,#175325,#175331)); +#175309 = ORIENTED_EDGE('',*,*,#175310,.F.); +#175310 = EDGE_CURVE('',#175311,#175280,#175313,.T.); +#175311 = VERTEX_POINT('',#175312); +#175312 = CARTESIAN_POINT('',(0.85,1.E-01,1.)); +#175313 = LINE('',#175314,#175315); +#175314 = CARTESIAN_POINT('',(0.95,1.E-01,1.)); +#175315 = VECTOR('',#175316,1.); +#175316 = DIRECTION('',(1.,-1.084202172486E-15,-0.)); +#175317 = ORIENTED_EDGE('',*,*,#175318,.F.); +#175318 = EDGE_CURVE('',#175319,#175311,#175321,.T.); +#175319 = VERTEX_POINT('',#175320); +#175320 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#175321 = LINE('',#175322,#175323); +#175322 = CARTESIAN_POINT('',(0.85,1.E-01,-1.)); +#175323 = VECTOR('',#175324,1.); +#175324 = DIRECTION('',(0.,0.,1.)); +#175325 = ORIENTED_EDGE('',*,*,#175326,.T.); +#175326 = EDGE_CURVE('',#175319,#175288,#175327,.T.); +#175327 = LINE('',#175328,#175329); +#175328 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#175329 = VECTOR('',#175330,1.); +#175330 = DIRECTION('',(1.,-1.084202172486E-15,-0.)); +#175331 = ORIENTED_EDGE('',*,*,#175287,.T.); +#175332 = PLANE('',#175333); +#175333 = AXIS2_PLACEMENT_3D('',#175334,#175335,#175336); +#175334 = CARTESIAN_POINT('',(0.95,1.E-01,-1.)); +#175335 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#175336 = DIRECTION('',(1.,-1.084202172486E-15,0.)); +#175337 = ADVANCED_FACE('',(#175338),#175354,.T.); +#175338 = FACE_BOUND('',#175339,.T.); +#175339 = EDGE_LOOP('',(#175340,#175346,#175347,#175353)); +#175340 = ORIENTED_EDGE('',*,*,#175341,.F.); +#175341 = EDGE_CURVE('',#175242,#175311,#175342,.T.); +#175342 = LINE('',#175343,#175344); +#175343 = CARTESIAN_POINT('',(0.85,0.2,1.)); +#175344 = VECTOR('',#175345,1.); +#175345 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#175346 = ORIENTED_EDGE('',*,*,#175265,.F.); +#175347 = ORIENTED_EDGE('',*,*,#175348,.T.); +#175348 = EDGE_CURVE('',#175258,#175319,#175349,.T.); +#175349 = LINE('',#175350,#175351); +#175350 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#175351 = VECTOR('',#175352,1.); +#175352 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#175353 = ORIENTED_EDGE('',*,*,#175318,.T.); +#175354 = PLANE('',#175355); +#175355 = AXIS2_PLACEMENT_3D('',#175356,#175357,#175358); +#175356 = CARTESIAN_POINT('',(0.85,0.2,-1.)); +#175357 = DIRECTION('',(-1.,2.168404344971E-15,0.)); +#175358 = DIRECTION('',(-2.168404344971E-15,-1.,0.)); +#175359 = ADVANCED_FACE('',(#175360),#175366,.F.); +#175360 = FACE_BOUND('',#175361,.T.); +#175361 = EDGE_LOOP('',(#175362,#175363,#175364,#175365)); +#175362 = ORIENTED_EDGE('',*,*,#175257,.F.); +#175363 = ORIENTED_EDGE('',*,*,#175295,.F.); +#175364 = ORIENTED_EDGE('',*,*,#175326,.F.); +#175365 = ORIENTED_EDGE('',*,*,#175348,.F.); +#175366 = PLANE('',#175367); +#175367 = AXIS2_PLACEMENT_3D('',#175368,#175369,#175370); +#175368 = CARTESIAN_POINT('',(0.,0.,-1.)); +#175369 = DIRECTION('',(0.,0.,1.)); +#175370 = DIRECTION('',(1.,0.,-0.)); +#175371 = ADVANCED_FACE('',(#175372),#175378,.T.); +#175372 = FACE_BOUND('',#175373,.T.); +#175373 = EDGE_LOOP('',(#175374,#175375,#175376,#175377)); +#175374 = ORIENTED_EDGE('',*,*,#175239,.T.); +#175375 = ORIENTED_EDGE('',*,*,#175341,.T.); +#175376 = ORIENTED_EDGE('',*,*,#175310,.T.); +#175377 = ORIENTED_EDGE('',*,*,#175279,.T.); +#175378 = PLANE('',#175379); +#175379 = AXIS2_PLACEMENT_3D('',#175380,#175381,#175382); +#175380 = CARTESIAN_POINT('',(0.,0.,1.)); +#175381 = DIRECTION('',(0.,0.,1.)); +#175382 = DIRECTION('',(1.,0.,-0.)); +#175383 = MANIFOLD_SOLID_BREP('',#175384); +#175384 = CLOSED_SHELL('',(#175385,#175425,#175456,#175487,#175509, + #175521)); +#175385 = ADVANCED_FACE('',(#175386),#175420,.T.); +#175386 = FACE_BOUND('',#175387,.T.); +#175387 = EDGE_LOOP('',(#175388,#175398,#175406,#175414)); +#175388 = ORIENTED_EDGE('',*,*,#175389,.F.); +#175389 = EDGE_CURVE('',#175390,#175392,#175394,.T.); +#175390 = VERTEX_POINT('',#175391); +#175391 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#175392 = VERTEX_POINT('',#175393); +#175393 = CARTESIAN_POINT('',(0.375,0.2,1.)); +#175394 = LINE('',#175395,#175396); +#175395 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#175396 = VECTOR('',#175397,1.); +#175397 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#175398 = ORIENTED_EDGE('',*,*,#175399,.F.); +#175399 = EDGE_CURVE('',#175400,#175390,#175402,.T.); +#175400 = VERTEX_POINT('',#175401); +#175401 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175402 = LINE('',#175403,#175404); +#175403 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175404 = VECTOR('',#175405,1.); +#175405 = DIRECTION('',(0.,0.,1.)); +#175406 = ORIENTED_EDGE('',*,*,#175407,.T.); +#175407 = EDGE_CURVE('',#175400,#175408,#175410,.T.); +#175408 = VERTEX_POINT('',#175409); +#175409 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#175410 = LINE('',#175411,#175412); +#175411 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175412 = VECTOR('',#175413,1.); +#175413 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#175414 = ORIENTED_EDGE('',*,*,#175415,.T.); +#175415 = EDGE_CURVE('',#175408,#175392,#175416,.T.); +#175416 = LINE('',#175417,#175418); +#175417 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#175418 = VECTOR('',#175419,1.); +#175419 = DIRECTION('',(0.,0.,1.)); +#175420 = PLANE('',#175421); +#175421 = AXIS2_PLACEMENT_3D('',#175422,#175423,#175424); +#175422 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175423 = DIRECTION('',(1.264902534566E-15,1.,-0.)); +#175424 = DIRECTION('',(-1.,1.264902534566E-15,0.)); +#175425 = ADVANCED_FACE('',(#175426),#175451,.T.); +#175426 = FACE_BOUND('',#175427,.T.); +#175427 = EDGE_LOOP('',(#175428,#175436,#175444,#175450)); +#175428 = ORIENTED_EDGE('',*,*,#175429,.F.); +#175429 = EDGE_CURVE('',#175430,#175390,#175432,.T.); +#175430 = VERTEX_POINT('',#175431); +#175431 = CARTESIAN_POINT('',(0.525,1.E-01,1.)); +#175432 = LINE('',#175433,#175434); +#175433 = CARTESIAN_POINT('',(0.525,0.2,1.)); +#175434 = VECTOR('',#175435,1.); +#175435 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#175436 = ORIENTED_EDGE('',*,*,#175437,.F.); +#175437 = EDGE_CURVE('',#175438,#175430,#175440,.T.); +#175438 = VERTEX_POINT('',#175439); +#175439 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#175440 = LINE('',#175441,#175442); +#175441 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#175442 = VECTOR('',#175443,1.); +#175443 = DIRECTION('',(0.,0.,1.)); +#175444 = ORIENTED_EDGE('',*,*,#175445,.T.); +#175445 = EDGE_CURVE('',#175438,#175400,#175446,.T.); +#175446 = LINE('',#175447,#175448); +#175447 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175448 = VECTOR('',#175449,1.); +#175449 = DIRECTION('',(2.168404344971E-15,1.,-0.)); +#175450 = ORIENTED_EDGE('',*,*,#175399,.T.); +#175451 = PLANE('',#175452); +#175452 = AXIS2_PLACEMENT_3D('',#175453,#175454,#175455); +#175453 = CARTESIAN_POINT('',(0.525,0.2,-1.)); +#175454 = DIRECTION('',(1.,-2.168404344971E-15,0.)); +#175455 = DIRECTION('',(2.168404344971E-15,1.,0.)); +#175456 = ADVANCED_FACE('',(#175457),#175482,.T.); +#175457 = FACE_BOUND('',#175458,.T.); +#175458 = EDGE_LOOP('',(#175459,#175467,#175475,#175481)); +#175459 = ORIENTED_EDGE('',*,*,#175460,.F.); +#175460 = EDGE_CURVE('',#175461,#175430,#175463,.T.); +#175461 = VERTEX_POINT('',#175462); +#175462 = CARTESIAN_POINT('',(0.375,1.E-01,1.)); +#175463 = LINE('',#175464,#175465); +#175464 = CARTESIAN_POINT('',(0.525,1.E-01,1.)); +#175465 = VECTOR('',#175466,1.); +#175466 = DIRECTION('',(1.,-1.264902534566E-15,-0.)); +#175467 = ORIENTED_EDGE('',*,*,#175468,.F.); +#175468 = EDGE_CURVE('',#175469,#175461,#175471,.T.); +#175469 = VERTEX_POINT('',#175470); +#175470 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#175471 = LINE('',#175472,#175473); +#175472 = CARTESIAN_POINT('',(0.375,1.E-01,-1.)); +#175473 = VECTOR('',#175474,1.); +#175474 = DIRECTION('',(0.,0.,1.)); +#175475 = ORIENTED_EDGE('',*,*,#175476,.T.); +#175476 = EDGE_CURVE('',#175469,#175438,#175477,.T.); +#175477 = LINE('',#175478,#175479); +#175478 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#175479 = VECTOR('',#175480,1.); +#175480 = DIRECTION('',(1.,-1.264902534566E-15,-0.)); +#175481 = ORIENTED_EDGE('',*,*,#175437,.T.); +#175482 = PLANE('',#175483); +#175483 = AXIS2_PLACEMENT_3D('',#175484,#175485,#175486); +#175484 = CARTESIAN_POINT('',(0.525,1.E-01,-1.)); +#175485 = DIRECTION('',(-1.264902534566E-15,-1.,0.)); +#175486 = DIRECTION('',(1.,-1.264902534566E-15,0.)); +#175487 = ADVANCED_FACE('',(#175488),#175504,.T.); +#175488 = FACE_BOUND('',#175489,.T.); +#175489 = EDGE_LOOP('',(#175490,#175496,#175497,#175503)); +#175490 = ORIENTED_EDGE('',*,*,#175491,.F.); +#175491 = EDGE_CURVE('',#175392,#175461,#175492,.T.); +#175492 = LINE('',#175493,#175494); +#175493 = CARTESIAN_POINT('',(0.375,0.2,1.)); +#175494 = VECTOR('',#175495,1.); +#175495 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#175496 = ORIENTED_EDGE('',*,*,#175415,.F.); +#175497 = ORIENTED_EDGE('',*,*,#175498,.T.); +#175498 = EDGE_CURVE('',#175408,#175469,#175499,.T.); +#175499 = LINE('',#175500,#175501); +#175500 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#175501 = VECTOR('',#175502,1.); +#175502 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#175503 = ORIENTED_EDGE('',*,*,#175468,.T.); +#175504 = PLANE('',#175505); +#175505 = AXIS2_PLACEMENT_3D('',#175506,#175507,#175508); +#175506 = CARTESIAN_POINT('',(0.375,0.2,-1.)); +#175507 = DIRECTION('',(-1.,1.084202172486E-15,0.)); +#175508 = DIRECTION('',(-1.084202172486E-15,-1.,0.)); +#175509 = ADVANCED_FACE('',(#175510),#175516,.F.); +#175510 = FACE_BOUND('',#175511,.T.); +#175511 = EDGE_LOOP('',(#175512,#175513,#175514,#175515)); +#175512 = ORIENTED_EDGE('',*,*,#175407,.F.); +#175513 = ORIENTED_EDGE('',*,*,#175445,.F.); +#175514 = ORIENTED_EDGE('',*,*,#175476,.F.); +#175515 = ORIENTED_EDGE('',*,*,#175498,.F.); +#175516 = PLANE('',#175517); +#175517 = AXIS2_PLACEMENT_3D('',#175518,#175519,#175520); +#175518 = CARTESIAN_POINT('',(0.,0.,-1.)); +#175519 = DIRECTION('',(0.,0.,1.)); +#175520 = DIRECTION('',(1.,0.,-0.)); +#175521 = ADVANCED_FACE('',(#175522),#175528,.T.); +#175522 = FACE_BOUND('',#175523,.T.); +#175523 = EDGE_LOOP('',(#175524,#175525,#175526,#175527)); +#175524 = ORIENTED_EDGE('',*,*,#175389,.T.); +#175525 = ORIENTED_EDGE('',*,*,#175491,.T.); +#175526 = ORIENTED_EDGE('',*,*,#175460,.T.); +#175527 = ORIENTED_EDGE('',*,*,#175429,.T.); +#175528 = PLANE('',#175529); +#175529 = AXIS2_PLACEMENT_3D('',#175530,#175531,#175532); +#175530 = CARTESIAN_POINT('',(0.,0.,1.)); +#175531 = DIRECTION('',(0.,0.,1.)); +#175532 = DIRECTION('',(1.,0.,-0.)); +#175533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#175537)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#175534,#175535,#175536)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#175534 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#175535 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#175536 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#175537 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#175534, + 'distance_accuracy_value','confusion accuracy'); +#175538 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175539,#175541); +#175539 = ( REPRESENTATION_RELATIONSHIP('','',#170028,#170005) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175540) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175540 = ITEM_DEFINED_TRANSFORMATION('','',#11,#170006); +#175541 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175542); +#175542 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('93','=>[0:1:1:46]','',#170000, + #170023,$); +#175543 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#170025)); +#175544 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175545,#175547); +#175545 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175546) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175546 = ITEM_DEFINED_TRANSFORMATION('','',#11,#295); +#175547 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175548); +#175548 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('95','R_STAT2','',#5,#31605,$); +#175549 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175550,#175552); +#175550 = ( REPRESENTATION_RELATIONSHIP('','',#165995,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175551) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175551 = ITEM_DEFINED_TRANSFORMATION('','',#11,#299); +#175552 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175553); +#175553 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('96','D_OR2','',#5,#165990,$); +#175554 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175555,#175557); +#175555 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175556) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175556 = ITEM_DEFINED_TRANSFORMATION('','',#11,#303); +#175557 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175558); +#175558 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('97','R_LATCH_G1','',#5,#31605, + $); +#175559 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175560,#175562); +#175560 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175561) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175561 = ITEM_DEFINED_TRANSFORMATION('','',#11,#307); +#175562 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175563); +#175563 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('98','R_FB2','',#5,#31605,$); +#175564 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175565,#175567); +#175565 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175566) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175566 = ITEM_DEFINED_TRANSFORMATION('','',#11,#311); +#175567 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175568); +#175568 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('99','R_VSET1','',#5,#31605,$); +#175569 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175570,#175572); +#175570 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175571) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175571 = ITEM_DEFINED_TRANSFORMATION('','',#11,#315); +#175572 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175573); +#175573 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('100','C_IMU_3','',#5,#32437,$ + ); +#175574 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175575,#175577); +#175575 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175576) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175576 = ITEM_DEFINED_TRANSFORMATION('','',#11,#319); +#175577 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175578); +#175578 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('101','R_STAT1','',#5,#31605,$ + ); +#175579 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175580,#175582); +#175580 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175581) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175581 = ITEM_DEFINED_TRANSFORMATION('','',#11,#323); +#175582 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175583); +#175583 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('102','R_ISET1','',#5,#31605,$ + ); +#175584 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175585,#175587); +#175585 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175586) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175586 = ITEM_DEFINED_TRANSFORMATION('','',#11,#327); +#175587 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175588); +#175588 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('103','R_FB1','',#5,#31605,$); +#175589 = SHAPE_DEFINITION_REPRESENTATION(#175590,#175596); +#175590 = PRODUCT_DEFINITION_SHAPE('','',#175591); +#175591 = PRODUCT_DEFINITION('design','',#175592,#175595); +#175592 = PRODUCT_DEFINITION_FORMATION('','',#175593); +#175593 = PRODUCT('SOT-23-5','SOT-23-5','',(#175594)); +#175594 = PRODUCT_CONTEXT('',#2,'mechanical'); +#175595 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#175596 = SHAPE_REPRESENTATION('',(#11,#175597),#175601); +#175597 = AXIS2_PLACEMENT_3D('',#175598,#175599,#175600); +#175598 = CARTESIAN_POINT('',(0.,0.,0.)); +#175599 = DIRECTION('',(0.,0.,1.)); +#175600 = DIRECTION('',(1.,0.,-0.)); +#175601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#175605)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#175602,#175603,#175604)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#175602 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#175603 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#175604 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#175605 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#175602, + 'distance_accuracy_value','confusion accuracy'); +#175606 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#175607,#175609); +#175607 = ( REPRESENTATION_RELATIONSHIP('','',#175596,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#175608) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#175608 = ITEM_DEFINED_TRANSFORMATION('','',#11,#331); +#175609 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #175610); +#175610 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('105','U_BUCK1','',#5,#175591,$ + ); +#175611 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#175593)); +#175612 = SHAPE_DEFINITION_REPRESENTATION(#175613,#175619); +#175613 = PRODUCT_DEFINITION_SHAPE('','',#175614); +#175614 = PRODUCT_DEFINITION('design','',#175615,#175618); +#175615 = PRODUCT_DEFINITION_FORMATION('','',#175616); +#175616 = PRODUCT('SOT-23-5','SOT-23-5','',(#175617)); +#175617 = PRODUCT_CONTEXT('',#2,'mechanical'); +#175618 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#175619 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#175620),#178689); +#175620 = MANIFOLD_SOLID_BREP('',#175621); +#175621 = CLOSED_SHELL('',(#175622,#175660,#175723,#175746,#175775, + #175798,#175869,#175924,#175947,#175970,#175987,#176010,#176098, + #176114,#176144,#176175,#176206,#176237,#176268,#176299,#176316, + #176333,#176364,#176395,#176426,#176456,#176479,#176502,#176519, + #176564,#176634,#176657,#176680,#176703,#176758,#176796,#176845, + #176937,#176962,#177046,#177068,#177160,#177185,#177269,#177286, + #177371,#177396,#177473,#177558,#177583,#177660,#177677,#177769, + #177794,#177878,#177895,#177914,#177933,#177979,#177995,#178014, + #178030,#178047,#178059,#178076,#178093,#178110,#178127,#178144, + #178161,#178178,#178190,#178207,#178224,#178241,#178258,#178275, + #178292,#178309,#178321,#178338,#178355,#178372,#178389,#178406, + #178423,#178435,#178452,#178469,#178486,#178503,#178520,#178537, + #178549,#178566,#178583,#178600,#178617,#178634,#178651,#178668, + #178680)); +#175622 = ADVANCED_FACE('',(#175623),#175655,.F.); +#175623 = FACE_BOUND('',#175624,.F.); +#175624 = EDGE_LOOP('',(#175625,#175635,#175642,#175650)); +#175625 = ORIENTED_EDGE('',*,*,#175626,.T.); +#175626 = EDGE_CURVE('',#175627,#175629,#175631,.T.); +#175627 = VERTEX_POINT('',#175628); +#175628 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175629 = VERTEX_POINT('',#175630); +#175630 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#175631 = LINE('',#175632,#175633); +#175632 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175633 = VECTOR('',#175634,1.); +#175634 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#175635 = ORIENTED_EDGE('',*,*,#175636,.T.); +#175636 = EDGE_CURVE('',#175629,#175637,#175639,.T.); +#175637 = VERTEX_POINT('',#175638); +#175638 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175639 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175640,#175641), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175640 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#175641 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175642 = ORIENTED_EDGE('',*,*,#175643,.F.); +#175643 = EDGE_CURVE('',#175644,#175637,#175646,.T.); +#175644 = VERTEX_POINT('',#175645); +#175645 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175646 = LINE('',#175647,#175648); +#175647 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175648 = VECTOR('',#175649,1.); +#175649 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#175650 = ORIENTED_EDGE('',*,*,#175651,.F.); +#175651 = EDGE_CURVE('',#175627,#175644,#175652,.T.); +#175652 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175653,#175654), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175653 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175654 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175655 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175656,#175657) + ,(#175658,#175659 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#175656 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175657 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175658 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#175659 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175660 = ADVANCED_FACE('',(#175661),#175718,.F.); +#175661 = FACE_BOUND('',#175662,.T.); +#175662 = EDGE_LOOP('',(#175663,#175664,#175672,#175680,#175688,#175696, + #175704,#175712)); +#175663 = ORIENTED_EDGE('',*,*,#175626,.T.); +#175664 = ORIENTED_EDGE('',*,*,#175665,.T.); +#175665 = EDGE_CURVE('',#175629,#175666,#175668,.T.); +#175666 = VERTEX_POINT('',#175667); +#175667 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#175668 = LINE('',#175669,#175670); +#175669 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#175670 = VECTOR('',#175671,1.); +#175671 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#175672 = ORIENTED_EDGE('',*,*,#175673,.T.); +#175673 = EDGE_CURVE('',#175666,#175674,#175676,.T.); +#175674 = VERTEX_POINT('',#175675); +#175675 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#175676 = LINE('',#175677,#175678); +#175677 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#175678 = VECTOR('',#175679,1.); +#175679 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175680 = ORIENTED_EDGE('',*,*,#175681,.T.); +#175681 = EDGE_CURVE('',#175674,#175682,#175684,.T.); +#175682 = VERTEX_POINT('',#175683); +#175683 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#175684 = LINE('',#175685,#175686); +#175685 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#175686 = VECTOR('',#175687,1.); +#175687 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#175688 = ORIENTED_EDGE('',*,*,#175689,.T.); +#175689 = EDGE_CURVE('',#175682,#175690,#175692,.T.); +#175690 = VERTEX_POINT('',#175691); +#175691 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#175692 = LINE('',#175693,#175694); +#175693 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#175694 = VECTOR('',#175695,1.); +#175695 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#175696 = ORIENTED_EDGE('',*,*,#175697,.T.); +#175697 = EDGE_CURVE('',#175690,#175698,#175700,.T.); +#175698 = VERTEX_POINT('',#175699); +#175699 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#175700 = LINE('',#175701,#175702); +#175701 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#175702 = VECTOR('',#175703,1.); +#175703 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#175704 = ORIENTED_EDGE('',*,*,#175705,.T.); +#175705 = EDGE_CURVE('',#175698,#175706,#175708,.T.); +#175706 = VERTEX_POINT('',#175707); +#175707 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#175708 = LINE('',#175709,#175710); +#175709 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#175710 = VECTOR('',#175711,1.); +#175711 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175712 = ORIENTED_EDGE('',*,*,#175713,.T.); +#175713 = EDGE_CURVE('',#175706,#175627,#175714,.T.); +#175714 = LINE('',#175715,#175716); +#175715 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#175716 = VECTOR('',#175717,1.); +#175717 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#175718 = PLANE('',#175719); +#175719 = AXIS2_PLACEMENT_3D('',#175720,#175721,#175722); +#175720 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175721 = DIRECTION('',(0.,0.,1.)); +#175722 = DIRECTION('',(0.436587433964,-0.899661832304,0.)); +#175723 = ADVANCED_FACE('',(#175724),#175741,.F.); +#175724 = FACE_BOUND('',#175725,.F.); +#175725 = EDGE_LOOP('',(#175726,#175727,#175734,#175740)); +#175726 = ORIENTED_EDGE('',*,*,#175665,.T.); +#175727 = ORIENTED_EDGE('',*,*,#175728,.T.); +#175728 = EDGE_CURVE('',#175666,#175729,#175731,.T.); +#175729 = VERTEX_POINT('',#175730); +#175730 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175731 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175732,#175733), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175732 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#175733 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175734 = ORIENTED_EDGE('',*,*,#175735,.F.); +#175735 = EDGE_CURVE('',#175637,#175729,#175736,.T.); +#175736 = LINE('',#175737,#175738); +#175737 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175738 = VECTOR('',#175739,1.); +#175739 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#175740 = ORIENTED_EDGE('',*,*,#175636,.F.); +#175741 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175742,#175743) + ,(#175744,#175745 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#175742 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1)); +#175743 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175744 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#175745 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175746 = ADVANCED_FACE('',(#175747),#175770,.F.); +#175747 = FACE_BOUND('',#175748,.F.); +#175748 = EDGE_LOOP('',(#175749,#175750,#175757,#175765)); +#175749 = ORIENTED_EDGE('',*,*,#175643,.T.); +#175750 = ORIENTED_EDGE('',*,*,#175751,.T.); +#175751 = EDGE_CURVE('',#175637,#175752,#175754,.T.); +#175752 = VERTEX_POINT('',#175753); +#175753 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#175754 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175755,#175756), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175755 = CARTESIAN_POINT('',(0.705,1.45,0.75)); +#175756 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#175757 = ORIENTED_EDGE('',*,*,#175758,.F.); +#175758 = EDGE_CURVE('',#175759,#175752,#175761,.T.); +#175759 = VERTEX_POINT('',#175760); +#175760 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#175761 = LINE('',#175762,#175763); +#175762 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#175763 = VECTOR('',#175764,1.); +#175764 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#175765 = ORIENTED_EDGE('',*,*,#175766,.F.); +#175766 = EDGE_CURVE('',#175644,#175759,#175767,.T.); +#175767 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175768,#175769), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175768 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175769 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#175770 = PLANE('',#175771); +#175771 = AXIS2_PLACEMENT_3D('',#175772,#175773,#175774); +#175772 = CARTESIAN_POINT('',(-0.705,1.45,0.9)); +#175773 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175774 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#175775 = ADVANCED_FACE('',(#175776),#175793,.F.); +#175776 = FACE_BOUND('',#175777,.F.); +#175777 = EDGE_LOOP('',(#175778,#175779,#175780,#175788)); +#175778 = ORIENTED_EDGE('',*,*,#175713,.T.); +#175779 = ORIENTED_EDGE('',*,*,#175651,.T.); +#175780 = ORIENTED_EDGE('',*,*,#175781,.F.); +#175781 = EDGE_CURVE('',#175782,#175644,#175784,.T.); +#175782 = VERTEX_POINT('',#175783); +#175783 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#175784 = LINE('',#175785,#175786); +#175785 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#175786 = VECTOR('',#175787,1.); +#175787 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#175788 = ORIENTED_EDGE('',*,*,#175789,.F.); +#175789 = EDGE_CURVE('',#175706,#175782,#175790,.T.); +#175790 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175791,#175792), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175791 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#175792 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#175793 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175794,#175795) + ,(#175796,#175797 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#175794 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#175795 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#175796 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1)); +#175797 = CARTESIAN_POINT('',(-0.705,1.45,0.75)); +#175798 = ADVANCED_FACE('',(#175799),#175864,.F.); +#175799 = FACE_BOUND('',#175800,.F.); +#175800 = EDGE_LOOP('',(#175801,#175802,#175803,#175811,#175819,#175827, + #175835,#175843,#175851,#175859)); +#175801 = ORIENTED_EDGE('',*,*,#175705,.T.); +#175802 = ORIENTED_EDGE('',*,*,#175789,.T.); +#175803 = ORIENTED_EDGE('',*,*,#175804,.F.); +#175804 = EDGE_CURVE('',#175805,#175782,#175807,.T.); +#175805 = VERTEX_POINT('',#175806); +#175806 = CARTESIAN_POINT('',(-0.8,1.2,0.75)); +#175807 = LINE('',#175808,#175809); +#175808 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175809 = VECTOR('',#175810,1.); +#175810 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175811 = ORIENTED_EDGE('',*,*,#175812,.F.); +#175812 = EDGE_CURVE('',#175813,#175805,#175815,.T.); +#175813 = VERTEX_POINT('',#175814); +#175814 = CARTESIAN_POINT('',(-0.8,0.7,0.75)); +#175815 = LINE('',#175816,#175817); +#175816 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175817 = VECTOR('',#175818,1.); +#175818 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175819 = ORIENTED_EDGE('',*,*,#175820,.F.); +#175820 = EDGE_CURVE('',#175821,#175813,#175823,.T.); +#175821 = VERTEX_POINT('',#175822); +#175822 = CARTESIAN_POINT('',(-0.8,0.25,0.75)); +#175823 = LINE('',#175824,#175825); +#175824 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175825 = VECTOR('',#175826,1.); +#175826 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175827 = ORIENTED_EDGE('',*,*,#175828,.F.); +#175828 = EDGE_CURVE('',#175829,#175821,#175831,.T.); +#175829 = VERTEX_POINT('',#175830); +#175830 = CARTESIAN_POINT('',(-0.8,-0.25,0.75)); +#175831 = LINE('',#175832,#175833); +#175832 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175833 = VECTOR('',#175834,1.); +#175834 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175835 = ORIENTED_EDGE('',*,*,#175836,.F.); +#175836 = EDGE_CURVE('',#175837,#175829,#175839,.T.); +#175837 = VERTEX_POINT('',#175838); +#175838 = CARTESIAN_POINT('',(-0.8,-0.7,0.75)); +#175839 = LINE('',#175840,#175841); +#175840 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175841 = VECTOR('',#175842,1.); +#175842 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175843 = ORIENTED_EDGE('',*,*,#175844,.F.); +#175844 = EDGE_CURVE('',#175845,#175837,#175847,.T.); +#175845 = VERTEX_POINT('',#175846); +#175846 = CARTESIAN_POINT('',(-0.8,-1.2,0.75)); +#175847 = LINE('',#175848,#175849); +#175848 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175849 = VECTOR('',#175850,1.); +#175850 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175851 = ORIENTED_EDGE('',*,*,#175852,.F.); +#175852 = EDGE_CURVE('',#175853,#175845,#175855,.T.); +#175853 = VERTEX_POINT('',#175854); +#175854 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175855 = LINE('',#175856,#175857); +#175856 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175857 = VECTOR('',#175858,1.); +#175858 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#175859 = ORIENTED_EDGE('',*,*,#175860,.F.); +#175860 = EDGE_CURVE('',#175698,#175853,#175861,.T.); +#175861 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175862,#175863), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175862 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#175863 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175864 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175865,#175866) + ,(#175867,#175868 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#175865 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#175866 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175867 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1)); +#175868 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#175869 = ADVANCED_FACE('',(#175870),#175919,.F.); +#175870 = FACE_BOUND('',#175871,.F.); +#175871 = EDGE_LOOP('',(#175872,#175873,#175880,#175888,#175896,#175904, + #175912,#175918)); +#175872 = ORIENTED_EDGE('',*,*,#175673,.T.); +#175873 = ORIENTED_EDGE('',*,*,#175874,.T.); +#175874 = EDGE_CURVE('',#175674,#175875,#175877,.T.); +#175875 = VERTEX_POINT('',#175876); +#175876 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#175877 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175878,#175879), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175878 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#175879 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#175880 = ORIENTED_EDGE('',*,*,#175881,.F.); +#175881 = EDGE_CURVE('',#175882,#175875,#175884,.T.); +#175882 = VERTEX_POINT('',#175883); +#175883 = CARTESIAN_POINT('',(0.8,-1.2,0.75)); +#175884 = LINE('',#175885,#175886); +#175885 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175886 = VECTOR('',#175887,1.); +#175887 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175888 = ORIENTED_EDGE('',*,*,#175889,.F.); +#175889 = EDGE_CURVE('',#175890,#175882,#175892,.T.); +#175890 = VERTEX_POINT('',#175891); +#175891 = CARTESIAN_POINT('',(0.8,-0.7,0.75)); +#175892 = LINE('',#175893,#175894); +#175893 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175894 = VECTOR('',#175895,1.); +#175895 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175896 = ORIENTED_EDGE('',*,*,#175897,.F.); +#175897 = EDGE_CURVE('',#175898,#175890,#175900,.T.); +#175898 = VERTEX_POINT('',#175899); +#175899 = CARTESIAN_POINT('',(0.8,0.7,0.75)); +#175900 = LINE('',#175901,#175902); +#175901 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175902 = VECTOR('',#175903,1.); +#175903 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175904 = ORIENTED_EDGE('',*,*,#175905,.F.); +#175905 = EDGE_CURVE('',#175906,#175898,#175908,.T.); +#175906 = VERTEX_POINT('',#175907); +#175907 = CARTESIAN_POINT('',(0.8,1.2,0.75)); +#175908 = LINE('',#175909,#175910); +#175909 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175910 = VECTOR('',#175911,1.); +#175911 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175912 = ORIENTED_EDGE('',*,*,#175913,.F.); +#175913 = EDGE_CURVE('',#175729,#175906,#175914,.T.); +#175914 = LINE('',#175915,#175916); +#175915 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175916 = VECTOR('',#175917,1.); +#175917 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175918 = ORIENTED_EDGE('',*,*,#175728,.F.); +#175919 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175920,#175921) + ,(#175922,#175923 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#175920 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1)); +#175921 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175922 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#175923 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#175924 = ADVANCED_FACE('',(#175925),#175942,.F.); +#175925 = FACE_BOUND('',#175926,.F.); +#175926 = EDGE_LOOP('',(#175927,#175928,#175929,#175937)); +#175927 = ORIENTED_EDGE('',*,*,#175697,.T.); +#175928 = ORIENTED_EDGE('',*,*,#175860,.T.); +#175929 = ORIENTED_EDGE('',*,*,#175930,.F.); +#175930 = EDGE_CURVE('',#175931,#175853,#175933,.T.); +#175931 = VERTEX_POINT('',#175932); +#175932 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#175933 = LINE('',#175934,#175935); +#175934 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#175935 = VECTOR('',#175936,1.); +#175936 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#175937 = ORIENTED_EDGE('',*,*,#175938,.F.); +#175938 = EDGE_CURVE('',#175690,#175931,#175939,.T.); +#175939 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175940,#175941), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175940 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#175941 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#175942 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175943,#175944) + ,(#175945,#175946 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#175943 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#175944 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#175945 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1)); +#175946 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#175947 = ADVANCED_FACE('',(#175948),#175965,.F.); +#175948 = FACE_BOUND('',#175949,.F.); +#175949 = EDGE_LOOP('',(#175950,#175951,#175958,#175964)); +#175950 = ORIENTED_EDGE('',*,*,#175681,.T.); +#175951 = ORIENTED_EDGE('',*,*,#175952,.T.); +#175952 = EDGE_CURVE('',#175682,#175953,#175955,.T.); +#175953 = VERTEX_POINT('',#175954); +#175954 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#175955 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175956,#175957), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175956 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#175957 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#175958 = ORIENTED_EDGE('',*,*,#175959,.F.); +#175959 = EDGE_CURVE('',#175875,#175953,#175960,.T.); +#175960 = LINE('',#175961,#175962); +#175961 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#175962 = VECTOR('',#175963,1.); +#175963 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#175964 = ORIENTED_EDGE('',*,*,#175874,.F.); +#175965 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175966,#175967) + ,(#175968,#175969 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#175966 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1)); +#175967 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#175968 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#175969 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#175970 = ADVANCED_FACE('',(#175971),#175982,.F.); +#175971 = FACE_BOUND('',#175972,.F.); +#175972 = EDGE_LOOP('',(#175973,#175974,#175975,#175981)); +#175973 = ORIENTED_EDGE('',*,*,#175689,.T.); +#175974 = ORIENTED_EDGE('',*,*,#175938,.T.); +#175975 = ORIENTED_EDGE('',*,*,#175976,.F.); +#175976 = EDGE_CURVE('',#175953,#175931,#175977,.T.); +#175977 = LINE('',#175978,#175979); +#175978 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#175979 = VECTOR('',#175980,1.); +#175980 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#175981 = ORIENTED_EDGE('',*,*,#175952,.F.); +#175982 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#175983,#175984) + ,(#175985,#175986 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#175983 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1)); +#175984 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#175985 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1)); +#175986 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#175987 = ADVANCED_FACE('',(#175988),#176005,.F.); +#175988 = FACE_BOUND('',#175989,.F.); +#175989 = EDGE_LOOP('',(#175990,#175991,#175998,#176004)); +#175990 = ORIENTED_EDGE('',*,*,#175735,.T.); +#175991 = ORIENTED_EDGE('',*,*,#175992,.T.); +#175992 = EDGE_CURVE('',#175729,#175993,#175995,.T.); +#175993 = VERTEX_POINT('',#175994); +#175994 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#175995 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#175996,#175997), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#175996 = CARTESIAN_POINT('',(0.8,1.355,0.75)); +#175997 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#175998 = ORIENTED_EDGE('',*,*,#175999,.F.); +#175999 = EDGE_CURVE('',#175752,#175993,#176000,.T.); +#176000 = LINE('',#176001,#176002); +#176001 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#176002 = VECTOR('',#176003,1.); +#176003 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176004 = ORIENTED_EDGE('',*,*,#175751,.F.); +#176005 = PLANE('',#176006); +#176006 = AXIS2_PLACEMENT_3D('',#176007,#176008,#176009); +#176007 = CARTESIAN_POINT('',(0.705,1.45,0.9)); +#176008 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176009 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176010 = ADVANCED_FACE('',(#176011),#176093,.F.); +#176011 = FACE_BOUND('',#176012,.F.); +#176012 = EDGE_LOOP('',(#176013,#176021,#176022,#176023,#176031,#176039, + #176047,#176055,#176063,#176071,#176079,#176087)); +#176013 = ORIENTED_EDGE('',*,*,#176014,.T.); +#176014 = EDGE_CURVE('',#176015,#175759,#176017,.T.); +#176015 = VERTEX_POINT('',#176016); +#176016 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#176017 = LINE('',#176018,#176019); +#176018 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#176019 = VECTOR('',#176020,1.); +#176020 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176021 = ORIENTED_EDGE('',*,*,#175758,.T.); +#176022 = ORIENTED_EDGE('',*,*,#175999,.T.); +#176023 = ORIENTED_EDGE('',*,*,#176024,.T.); +#176024 = EDGE_CURVE('',#175993,#176025,#176027,.T.); +#176025 = VERTEX_POINT('',#176026); +#176026 = CARTESIAN_POINT('',(0.8,1.2,0.9)); +#176027 = LINE('',#176028,#176029); +#176028 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176029 = VECTOR('',#176030,1.); +#176030 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176031 = ORIENTED_EDGE('',*,*,#176032,.T.); +#176032 = EDGE_CURVE('',#176025,#176033,#176035,.T.); +#176033 = VERTEX_POINT('',#176034); +#176034 = CARTESIAN_POINT('',(0.775,1.2,0.9)); +#176035 = LINE('',#176036,#176037); +#176036 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#176037 = VECTOR('',#176038,1.); +#176038 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176039 = ORIENTED_EDGE('',*,*,#176040,.F.); +#176040 = EDGE_CURVE('',#176041,#176033,#176043,.T.); +#176041 = VERTEX_POINT('',#176042); +#176042 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176043 = LINE('',#176044,#176045); +#176044 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176045 = VECTOR('',#176046,1.); +#176046 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176047 = ORIENTED_EDGE('',*,*,#176048,.F.); +#176048 = EDGE_CURVE('',#176049,#176041,#176051,.T.); +#176049 = VERTEX_POINT('',#176050); +#176050 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#176051 = LINE('',#176052,#176053); +#176052 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#176053 = VECTOR('',#176054,1.); +#176054 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176055 = ORIENTED_EDGE('',*,*,#176056,.F.); +#176056 = EDGE_CURVE('',#176057,#176049,#176059,.T.); +#176057 = VERTEX_POINT('',#176058); +#176058 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#176059 = LINE('',#176060,#176061); +#176060 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#176061 = VECTOR('',#176062,1.); +#176062 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176063 = ORIENTED_EDGE('',*,*,#176064,.F.); +#176064 = EDGE_CURVE('',#176065,#176057,#176067,.T.); +#176065 = VERTEX_POINT('',#176066); +#176066 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#176067 = LINE('',#176068,#176069); +#176068 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#176069 = VECTOR('',#176070,1.); +#176070 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176071 = ORIENTED_EDGE('',*,*,#176072,.F.); +#176072 = EDGE_CURVE('',#176073,#176065,#176075,.T.); +#176073 = VERTEX_POINT('',#176074); +#176074 = CARTESIAN_POINT('',(-0.775,1.2,0.9)); +#176075 = LINE('',#176076,#176077); +#176076 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176077 = VECTOR('',#176078,1.); +#176078 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176079 = ORIENTED_EDGE('',*,*,#176080,.F.); +#176080 = EDGE_CURVE('',#176081,#176073,#176083,.T.); +#176081 = VERTEX_POINT('',#176082); +#176082 = CARTESIAN_POINT('',(-0.8,1.2,0.9)); +#176083 = LINE('',#176084,#176085); +#176084 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#176085 = VECTOR('',#176086,1.); +#176086 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176087 = ORIENTED_EDGE('',*,*,#176088,.T.); +#176088 = EDGE_CURVE('',#176081,#176015,#176089,.T.); +#176089 = LINE('',#176090,#176091); +#176090 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176091 = VECTOR('',#176092,1.); +#176092 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176093 = PLANE('',#176094); +#176094 = AXIS2_PLACEMENT_3D('',#176095,#176096,#176097); +#176095 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#176096 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#176097 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#176098 = ADVANCED_FACE('',(#176099),#176109,.F.); +#176099 = FACE_BOUND('',#176100,.F.); +#176100 = EDGE_LOOP('',(#176101,#176102,#176103,#176104)); +#176101 = ORIENTED_EDGE('',*,*,#175781,.T.); +#176102 = ORIENTED_EDGE('',*,*,#175766,.T.); +#176103 = ORIENTED_EDGE('',*,*,#176014,.F.); +#176104 = ORIENTED_EDGE('',*,*,#176105,.F.); +#176105 = EDGE_CURVE('',#175782,#176015,#176106,.T.); +#176106 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176107,#176108), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176107 = CARTESIAN_POINT('',(-0.8,1.355,0.75)); +#176108 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#176109 = PLANE('',#176110); +#176110 = AXIS2_PLACEMENT_3D('',#176111,#176112,#176113); +#176111 = CARTESIAN_POINT('',(-0.8,1.355,0.9)); +#176112 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176113 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176114 = ADVANCED_FACE('',(#176115),#176139,.F.); +#176115 = FACE_BOUND('',#176116,.F.); +#176116 = EDGE_LOOP('',(#176117,#176124,#176125,#176133)); +#176117 = ORIENTED_EDGE('',*,*,#176118,.F.); +#176118 = EDGE_CURVE('',#175853,#176119,#176121,.T.); +#176119 = VERTEX_POINT('',#176120); +#176120 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176121 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176122,#176123), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176122 = CARTESIAN_POINT('',(-0.8,-1.355,0.75)); +#176123 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176124 = ORIENTED_EDGE('',*,*,#175852,.T.); +#176125 = ORIENTED_EDGE('',*,*,#176126,.T.); +#176126 = EDGE_CURVE('',#175845,#176127,#176129,.T.); +#176127 = VERTEX_POINT('',#176128); +#176128 = CARTESIAN_POINT('',(-0.8,-1.2,0.9)); +#176129 = LINE('',#176130,#176131); +#176130 = CARTESIAN_POINT('',(-0.8,-1.2,0.670847817658)); +#176131 = VECTOR('',#176132,1.); +#176132 = DIRECTION('',(0.,0.,1.)); +#176133 = ORIENTED_EDGE('',*,*,#176134,.F.); +#176134 = EDGE_CURVE('',#176119,#176127,#176135,.T.); +#176135 = LINE('',#176136,#176137); +#176136 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176137 = VECTOR('',#176138,1.); +#176138 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176139 = PLANE('',#176140); +#176140 = AXIS2_PLACEMENT_3D('',#176141,#176142,#176143); +#176141 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176142 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176143 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176144 = ADVANCED_FACE('',(#176145),#176170,.F.); +#176145 = FACE_BOUND('',#176146,.F.); +#176146 = EDGE_LOOP('',(#176147,#176155,#176156,#176164)); +#176147 = ORIENTED_EDGE('',*,*,#176148,.F.); +#176148 = EDGE_CURVE('',#175845,#176149,#176151,.T.); +#176149 = VERTEX_POINT('',#176150); +#176150 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#176151 = LINE('',#176152,#176153); +#176152 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#176153 = VECTOR('',#176154,1.); +#176154 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176155 = ORIENTED_EDGE('',*,*,#175844,.T.); +#176156 = ORIENTED_EDGE('',*,*,#176157,.T.); +#176157 = EDGE_CURVE('',#175837,#176158,#176160,.T.); +#176158 = VERTEX_POINT('',#176159); +#176159 = CARTESIAN_POINT('',(-0.85,-0.7,0.75)); +#176160 = LINE('',#176161,#176162); +#176161 = CARTESIAN_POINT('',(-0.75,-0.7,0.75)); +#176162 = VECTOR('',#176163,1.); +#176163 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176164 = ORIENTED_EDGE('',*,*,#176165,.F.); +#176165 = EDGE_CURVE('',#176149,#176158,#176166,.T.); +#176166 = LINE('',#176167,#176168); +#176167 = CARTESIAN_POINT('',(-0.85,-1.2,0.75)); +#176168 = VECTOR('',#176169,1.); +#176169 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176170 = PLANE('',#176171); +#176171 = AXIS2_PLACEMENT_3D('',#176172,#176173,#176174); +#176172 = CARTESIAN_POINT('',(-0.75,-1.2,0.75)); +#176173 = DIRECTION('',(0.,0.,1.)); +#176174 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176175 = ADVANCED_FACE('',(#176176),#176201,.F.); +#176176 = FACE_BOUND('',#176177,.F.); +#176177 = EDGE_LOOP('',(#176178,#176186,#176187,#176195)); +#176178 = ORIENTED_EDGE('',*,*,#176179,.F.); +#176179 = EDGE_CURVE('',#175837,#176180,#176182,.T.); +#176180 = VERTEX_POINT('',#176181); +#176181 = CARTESIAN_POINT('',(-0.8,-0.7,0.9)); +#176182 = LINE('',#176183,#176184); +#176183 = CARTESIAN_POINT('',(-0.8,-0.7,0.670847817658)); +#176184 = VECTOR('',#176185,1.); +#176185 = DIRECTION('',(0.,0.,1.)); +#176186 = ORIENTED_EDGE('',*,*,#175836,.T.); +#176187 = ORIENTED_EDGE('',*,*,#176188,.T.); +#176188 = EDGE_CURVE('',#175829,#176189,#176191,.T.); +#176189 = VERTEX_POINT('',#176190); +#176190 = CARTESIAN_POINT('',(-0.8,-0.25,0.9)); +#176191 = LINE('',#176192,#176193); +#176192 = CARTESIAN_POINT('',(-0.8,-0.25,0.670847817658)); +#176193 = VECTOR('',#176194,1.); +#176194 = DIRECTION('',(0.,0.,1.)); +#176195 = ORIENTED_EDGE('',*,*,#176196,.F.); +#176196 = EDGE_CURVE('',#176180,#176189,#176197,.T.); +#176197 = LINE('',#176198,#176199); +#176198 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176199 = VECTOR('',#176200,1.); +#176200 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176201 = PLANE('',#176202); +#176202 = AXIS2_PLACEMENT_3D('',#176203,#176204,#176205); +#176203 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176204 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176205 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176206 = ADVANCED_FACE('',(#176207),#176232,.F.); +#176207 = FACE_BOUND('',#176208,.F.); +#176208 = EDGE_LOOP('',(#176209,#176217,#176218,#176226)); +#176209 = ORIENTED_EDGE('',*,*,#176210,.F.); +#176210 = EDGE_CURVE('',#175829,#176211,#176213,.T.); +#176211 = VERTEX_POINT('',#176212); +#176212 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#176213 = LINE('',#176214,#176215); +#176214 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#176215 = VECTOR('',#176216,1.); +#176216 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176217 = ORIENTED_EDGE('',*,*,#175828,.T.); +#176218 = ORIENTED_EDGE('',*,*,#176219,.T.); +#176219 = EDGE_CURVE('',#175821,#176220,#176222,.T.); +#176220 = VERTEX_POINT('',#176221); +#176221 = CARTESIAN_POINT('',(-0.85,0.25,0.75)); +#176222 = LINE('',#176223,#176224); +#176223 = CARTESIAN_POINT('',(-0.75,0.25,0.75)); +#176224 = VECTOR('',#176225,1.); +#176225 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176226 = ORIENTED_EDGE('',*,*,#176227,.F.); +#176227 = EDGE_CURVE('',#176211,#176220,#176228,.T.); +#176228 = LINE('',#176229,#176230); +#176229 = CARTESIAN_POINT('',(-0.85,-0.25,0.75)); +#176230 = VECTOR('',#176231,1.); +#176231 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176232 = PLANE('',#176233); +#176233 = AXIS2_PLACEMENT_3D('',#176234,#176235,#176236); +#176234 = CARTESIAN_POINT('',(-0.75,-0.25,0.75)); +#176235 = DIRECTION('',(0.,0.,1.)); +#176236 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176237 = ADVANCED_FACE('',(#176238),#176263,.F.); +#176238 = FACE_BOUND('',#176239,.F.); +#176239 = EDGE_LOOP('',(#176240,#176248,#176249,#176257)); +#176240 = ORIENTED_EDGE('',*,*,#176241,.F.); +#176241 = EDGE_CURVE('',#175821,#176242,#176244,.T.); +#176242 = VERTEX_POINT('',#176243); +#176243 = CARTESIAN_POINT('',(-0.8,0.25,0.9)); +#176244 = LINE('',#176245,#176246); +#176245 = CARTESIAN_POINT('',(-0.8,0.25,0.670847817658)); +#176246 = VECTOR('',#176247,1.); +#176247 = DIRECTION('',(0.,0.,1.)); +#176248 = ORIENTED_EDGE('',*,*,#175820,.T.); +#176249 = ORIENTED_EDGE('',*,*,#176250,.T.); +#176250 = EDGE_CURVE('',#175813,#176251,#176253,.T.); +#176251 = VERTEX_POINT('',#176252); +#176252 = CARTESIAN_POINT('',(-0.8,0.7,0.9)); +#176253 = LINE('',#176254,#176255); +#176254 = CARTESIAN_POINT('',(-0.8,0.7,0.670847817658)); +#176255 = VECTOR('',#176256,1.); +#176256 = DIRECTION('',(0.,0.,1.)); +#176257 = ORIENTED_EDGE('',*,*,#176258,.F.); +#176258 = EDGE_CURVE('',#176242,#176251,#176259,.T.); +#176259 = LINE('',#176260,#176261); +#176260 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176261 = VECTOR('',#176262,1.); +#176262 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176263 = PLANE('',#176264); +#176264 = AXIS2_PLACEMENT_3D('',#176265,#176266,#176267); +#176265 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176266 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176267 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176268 = ADVANCED_FACE('',(#176269),#176294,.F.); +#176269 = FACE_BOUND('',#176270,.F.); +#176270 = EDGE_LOOP('',(#176271,#176279,#176280,#176288)); +#176271 = ORIENTED_EDGE('',*,*,#176272,.F.); +#176272 = EDGE_CURVE('',#175813,#176273,#176275,.T.); +#176273 = VERTEX_POINT('',#176274); +#176274 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#176275 = LINE('',#176276,#176277); +#176276 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#176277 = VECTOR('',#176278,1.); +#176278 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176279 = ORIENTED_EDGE('',*,*,#175812,.T.); +#176280 = ORIENTED_EDGE('',*,*,#176281,.T.); +#176281 = EDGE_CURVE('',#175805,#176282,#176284,.T.); +#176282 = VERTEX_POINT('',#176283); +#176283 = CARTESIAN_POINT('',(-0.85,1.2,0.75)); +#176284 = LINE('',#176285,#176286); +#176285 = CARTESIAN_POINT('',(-0.75,1.2,0.75)); +#176286 = VECTOR('',#176287,1.); +#176287 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176288 = ORIENTED_EDGE('',*,*,#176289,.F.); +#176289 = EDGE_CURVE('',#176273,#176282,#176290,.T.); +#176290 = LINE('',#176291,#176292); +#176291 = CARTESIAN_POINT('',(-0.85,0.7,0.75)); +#176292 = VECTOR('',#176293,1.); +#176293 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176294 = PLANE('',#176295); +#176295 = AXIS2_PLACEMENT_3D('',#176296,#176297,#176298); +#176296 = CARTESIAN_POINT('',(-0.75,0.7,0.75)); +#176297 = DIRECTION('',(0.,0.,1.)); +#176298 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176299 = ADVANCED_FACE('',(#176300),#176311,.F.); +#176300 = FACE_BOUND('',#176301,.F.); +#176301 = EDGE_LOOP('',(#176302,#176308,#176309,#176310)); +#176302 = ORIENTED_EDGE('',*,*,#176303,.F.); +#176303 = EDGE_CURVE('',#175805,#176081,#176304,.T.); +#176304 = LINE('',#176305,#176306); +#176305 = CARTESIAN_POINT('',(-0.8,1.2,0.670847817658)); +#176306 = VECTOR('',#176307,1.); +#176307 = DIRECTION('',(0.,0.,1.)); +#176308 = ORIENTED_EDGE('',*,*,#175804,.T.); +#176309 = ORIENTED_EDGE('',*,*,#176105,.T.); +#176310 = ORIENTED_EDGE('',*,*,#176088,.F.); +#176311 = PLANE('',#176312); +#176312 = AXIS2_PLACEMENT_3D('',#176313,#176314,#176315); +#176313 = CARTESIAN_POINT('',(-0.8,-1.355,0.9)); +#176314 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176315 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176316 = ADVANCED_FACE('',(#176317),#176328,.F.); +#176317 = FACE_BOUND('',#176318,.F.); +#176318 = EDGE_LOOP('',(#176319,#176320,#176321,#176327)); +#176319 = ORIENTED_EDGE('',*,*,#175992,.F.); +#176320 = ORIENTED_EDGE('',*,*,#175913,.T.); +#176321 = ORIENTED_EDGE('',*,*,#176322,.T.); +#176322 = EDGE_CURVE('',#175906,#176025,#176323,.T.); +#176323 = LINE('',#176324,#176325); +#176324 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658)); +#176325 = VECTOR('',#176326,1.); +#176326 = DIRECTION('',(0.,0.,1.)); +#176327 = ORIENTED_EDGE('',*,*,#176024,.F.); +#176328 = PLANE('',#176329); +#176329 = AXIS2_PLACEMENT_3D('',#176330,#176331,#176332); +#176330 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176331 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176332 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176333 = ADVANCED_FACE('',(#176334),#176359,.F.); +#176334 = FACE_BOUND('',#176335,.F.); +#176335 = EDGE_LOOP('',(#176336,#176344,#176345,#176353)); +#176336 = ORIENTED_EDGE('',*,*,#176337,.F.); +#176337 = EDGE_CURVE('',#175906,#176338,#176340,.T.); +#176338 = VERTEX_POINT('',#176339); +#176339 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#176340 = LINE('',#176341,#176342); +#176341 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#176342 = VECTOR('',#176343,1.); +#176343 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176344 = ORIENTED_EDGE('',*,*,#175905,.T.); +#176345 = ORIENTED_EDGE('',*,*,#176346,.T.); +#176346 = EDGE_CURVE('',#175898,#176347,#176349,.T.); +#176347 = VERTEX_POINT('',#176348); +#176348 = CARTESIAN_POINT('',(0.85,0.7,0.75)); +#176349 = LINE('',#176350,#176351); +#176350 = CARTESIAN_POINT('',(0.75,0.7,0.75)); +#176351 = VECTOR('',#176352,1.); +#176352 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176353 = ORIENTED_EDGE('',*,*,#176354,.F.); +#176354 = EDGE_CURVE('',#176338,#176347,#176355,.T.); +#176355 = LINE('',#176356,#176357); +#176356 = CARTESIAN_POINT('',(0.85,1.2,0.75)); +#176357 = VECTOR('',#176358,1.); +#176358 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176359 = PLANE('',#176360); +#176360 = AXIS2_PLACEMENT_3D('',#176361,#176362,#176363); +#176361 = CARTESIAN_POINT('',(0.75,1.2,0.75)); +#176362 = DIRECTION('',(0.,0.,1.)); +#176363 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#176364 = ADVANCED_FACE('',(#176365),#176390,.F.); +#176365 = FACE_BOUND('',#176366,.F.); +#176366 = EDGE_LOOP('',(#176367,#176375,#176376,#176384)); +#176367 = ORIENTED_EDGE('',*,*,#176368,.F.); +#176368 = EDGE_CURVE('',#175898,#176369,#176371,.T.); +#176369 = VERTEX_POINT('',#176370); +#176370 = CARTESIAN_POINT('',(0.8,0.7,0.9)); +#176371 = LINE('',#176372,#176373); +#176372 = CARTESIAN_POINT('',(0.8,0.7,0.670847817658)); +#176373 = VECTOR('',#176374,1.); +#176374 = DIRECTION('',(0.,0.,1.)); +#176375 = ORIENTED_EDGE('',*,*,#175897,.T.); +#176376 = ORIENTED_EDGE('',*,*,#176377,.T.); +#176377 = EDGE_CURVE('',#175890,#176378,#176380,.T.); +#176378 = VERTEX_POINT('',#176379); +#176379 = CARTESIAN_POINT('',(0.8,-0.7,0.9)); +#176380 = LINE('',#176381,#176382); +#176381 = CARTESIAN_POINT('',(0.8,-0.7,0.670847817658)); +#176382 = VECTOR('',#176383,1.); +#176383 = DIRECTION('',(0.,0.,1.)); +#176384 = ORIENTED_EDGE('',*,*,#176385,.F.); +#176385 = EDGE_CURVE('',#176369,#176378,#176386,.T.); +#176386 = LINE('',#176387,#176388); +#176387 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176388 = VECTOR('',#176389,1.); +#176389 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176390 = PLANE('',#176391); +#176391 = AXIS2_PLACEMENT_3D('',#176392,#176393,#176394); +#176392 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176393 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176394 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176395 = ADVANCED_FACE('',(#176396),#176421,.F.); +#176396 = FACE_BOUND('',#176397,.F.); +#176397 = EDGE_LOOP('',(#176398,#176406,#176407,#176415)); +#176398 = ORIENTED_EDGE('',*,*,#176399,.F.); +#176399 = EDGE_CURVE('',#175890,#176400,#176402,.T.); +#176400 = VERTEX_POINT('',#176401); +#176401 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#176402 = LINE('',#176403,#176404); +#176403 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#176404 = VECTOR('',#176405,1.); +#176405 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176406 = ORIENTED_EDGE('',*,*,#175889,.T.); +#176407 = ORIENTED_EDGE('',*,*,#176408,.T.); +#176408 = EDGE_CURVE('',#175882,#176409,#176411,.T.); +#176409 = VERTEX_POINT('',#176410); +#176410 = CARTESIAN_POINT('',(0.85,-1.2,0.75)); +#176411 = LINE('',#176412,#176413); +#176412 = CARTESIAN_POINT('',(0.75,-1.2,0.75)); +#176413 = VECTOR('',#176414,1.); +#176414 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176415 = ORIENTED_EDGE('',*,*,#176416,.F.); +#176416 = EDGE_CURVE('',#176400,#176409,#176417,.T.); +#176417 = LINE('',#176418,#176419); +#176418 = CARTESIAN_POINT('',(0.85,-0.7,0.75)); +#176419 = VECTOR('',#176420,1.); +#176420 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176421 = PLANE('',#176422); +#176422 = AXIS2_PLACEMENT_3D('',#176423,#176424,#176425); +#176423 = CARTESIAN_POINT('',(0.75,-0.7,0.75)); +#176424 = DIRECTION('',(0.,0.,1.)); +#176425 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#176426 = ADVANCED_FACE('',(#176427),#176451,.F.); +#176427 = FACE_BOUND('',#176428,.F.); +#176428 = EDGE_LOOP('',(#176429,#176437,#176438,#176445)); +#176429 = ORIENTED_EDGE('',*,*,#176430,.F.); +#176430 = EDGE_CURVE('',#175882,#176431,#176433,.T.); +#176431 = VERTEX_POINT('',#176432); +#176432 = CARTESIAN_POINT('',(0.8,-1.2,0.9)); +#176433 = LINE('',#176434,#176435); +#176434 = CARTESIAN_POINT('',(0.8,-1.2,0.670847817658)); +#176435 = VECTOR('',#176436,1.); +#176436 = DIRECTION('',(0.,0.,1.)); +#176437 = ORIENTED_EDGE('',*,*,#175881,.T.); +#176438 = ORIENTED_EDGE('',*,*,#176439,.T.); +#176439 = EDGE_CURVE('',#175875,#176440,#176442,.T.); +#176440 = VERTEX_POINT('',#176441); +#176441 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#176442 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176443,#176444), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176443 = CARTESIAN_POINT('',(0.8,-1.355,0.75)); +#176444 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#176445 = ORIENTED_EDGE('',*,*,#176446,.F.); +#176446 = EDGE_CURVE('',#176431,#176440,#176447,.T.); +#176447 = LINE('',#176448,#176449); +#176448 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176449 = VECTOR('',#176450,1.); +#176450 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176451 = PLANE('',#176452); +#176452 = AXIS2_PLACEMENT_3D('',#176453,#176454,#176455); +#176453 = CARTESIAN_POINT('',(0.8,1.355,0.9)); +#176454 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176455 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176456 = ADVANCED_FACE('',(#176457),#176474,.F.); +#176457 = FACE_BOUND('',#176458,.F.); +#176458 = EDGE_LOOP('',(#176459,#176460,#176461,#176469)); +#176459 = ORIENTED_EDGE('',*,*,#175930,.T.); +#176460 = ORIENTED_EDGE('',*,*,#176118,.T.); +#176461 = ORIENTED_EDGE('',*,*,#176462,.F.); +#176462 = EDGE_CURVE('',#176463,#176119,#176465,.T.); +#176463 = VERTEX_POINT('',#176464); +#176464 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#176465 = LINE('',#176466,#176467); +#176466 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#176467 = VECTOR('',#176468,1.); +#176468 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176469 = ORIENTED_EDGE('',*,*,#176470,.F.); +#176470 = EDGE_CURVE('',#175931,#176463,#176471,.T.); +#176471 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176472,#176473), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176472 = CARTESIAN_POINT('',(-0.705,-1.45,0.75)); +#176473 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#176474 = PLANE('',#176475); +#176475 = AXIS2_PLACEMENT_3D('',#176476,#176477,#176478); +#176476 = CARTESIAN_POINT('',(-0.705,-1.45,0.9)); +#176477 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176478 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176479 = ADVANCED_FACE('',(#176480),#176497,.F.); +#176480 = FACE_BOUND('',#176481,.F.); +#176481 = EDGE_LOOP('',(#176482,#176483,#176490,#176496)); +#176482 = ORIENTED_EDGE('',*,*,#175959,.T.); +#176483 = ORIENTED_EDGE('',*,*,#176484,.T.); +#176484 = EDGE_CURVE('',#175953,#176485,#176487,.T.); +#176485 = VERTEX_POINT('',#176486); +#176486 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#176487 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176488,#176489), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176488 = CARTESIAN_POINT('',(0.705,-1.45,0.75)); +#176489 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#176490 = ORIENTED_EDGE('',*,*,#176491,.F.); +#176491 = EDGE_CURVE('',#176440,#176485,#176492,.T.); +#176492 = LINE('',#176493,#176494); +#176493 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#176494 = VECTOR('',#176495,1.); +#176495 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176496 = ORIENTED_EDGE('',*,*,#176439,.F.); +#176497 = PLANE('',#176498); +#176498 = AXIS2_PLACEMENT_3D('',#176499,#176500,#176501); +#176499 = CARTESIAN_POINT('',(0.8,-1.355,0.9)); +#176500 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176501 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176502 = ADVANCED_FACE('',(#176503),#176514,.F.); +#176503 = FACE_BOUND('',#176504,.F.); +#176504 = EDGE_LOOP('',(#176505,#176506,#176507,#176513)); +#176505 = ORIENTED_EDGE('',*,*,#175976,.T.); +#176506 = ORIENTED_EDGE('',*,*,#176470,.T.); +#176507 = ORIENTED_EDGE('',*,*,#176508,.F.); +#176508 = EDGE_CURVE('',#176485,#176463,#176509,.T.); +#176509 = LINE('',#176510,#176511); +#176510 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#176511 = VECTOR('',#176512,1.); +#176512 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176513 = ORIENTED_EDGE('',*,*,#176484,.F.); +#176514 = PLANE('',#176515); +#176515 = AXIS2_PLACEMENT_3D('',#176516,#176517,#176518); +#176516 = CARTESIAN_POINT('',(0.705,-1.45,0.9)); +#176517 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176518 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176519 = ADVANCED_FACE('',(#176520),#176559,.F.); +#176520 = FACE_BOUND('',#176521,.F.); +#176521 = EDGE_LOOP('',(#176522,#176530,#176538,#176544,#176545,#176553) + ); +#176522 = ORIENTED_EDGE('',*,*,#176523,.F.); +#176523 = EDGE_CURVE('',#176524,#176251,#176526,.T.); +#176524 = VERTEX_POINT('',#176525); +#176525 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#176526 = LINE('',#176527,#176528); +#176527 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#176528 = VECTOR('',#176529,1.); +#176529 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176530 = ORIENTED_EDGE('',*,*,#176531,.T.); +#176531 = EDGE_CURVE('',#176524,#176532,#176534,.T.); +#176532 = VERTEX_POINT('',#176533); +#176533 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#176534 = LINE('',#176535,#176536); +#176535 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#176536 = VECTOR('',#176537,1.); +#176537 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176538 = ORIENTED_EDGE('',*,*,#176539,.T.); +#176539 = EDGE_CURVE('',#176532,#176081,#176540,.T.); +#176540 = LINE('',#176541,#176542); +#176541 = CARTESIAN_POINT('',(-0.85,1.2,0.9)); +#176542 = VECTOR('',#176543,1.); +#176543 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176544 = ORIENTED_EDGE('',*,*,#176080,.T.); +#176545 = ORIENTED_EDGE('',*,*,#176546,.F.); +#176546 = EDGE_CURVE('',#176547,#176073,#176549,.T.); +#176547 = VERTEX_POINT('',#176548); +#176548 = CARTESIAN_POINT('',(-0.775,0.7,0.9)); +#176549 = LINE('',#176550,#176551); +#176550 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176551 = VECTOR('',#176552,1.); +#176552 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176553 = ORIENTED_EDGE('',*,*,#176554,.F.); +#176554 = EDGE_CURVE('',#176251,#176547,#176555,.T.); +#176555 = LINE('',#176556,#176557); +#176556 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#176557 = VECTOR('',#176558,1.); +#176558 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176559 = PLANE('',#176560); +#176560 = AXIS2_PLACEMENT_3D('',#176561,#176562,#176563); +#176561 = CARTESIAN_POINT('',(-0.85,0.7,0.9)); +#176562 = DIRECTION('',(0.,0.,-1.)); +#176563 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176564 = ADVANCED_FACE('',(#176565),#176629,.F.); +#176565 = FACE_BOUND('',#176566,.F.); +#176566 = EDGE_LOOP('',(#176567,#176577,#176585,#176593,#176601,#176607, + #176608,#176609,#176616,#176624)); +#176567 = ORIENTED_EDGE('',*,*,#176568,.T.); +#176568 = EDGE_CURVE('',#176569,#176571,#176573,.T.); +#176569 = VERTEX_POINT('',#176570); +#176570 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176571 = VERTEX_POINT('',#176572); +#176572 = CARTESIAN_POINT('',(-0.775,-1.2,0.9)); +#176573 = LINE('',#176574,#176575); +#176574 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176575 = VECTOR('',#176576,1.); +#176576 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176577 = ORIENTED_EDGE('',*,*,#176578,.T.); +#176578 = EDGE_CURVE('',#176571,#176579,#176581,.T.); +#176579 = VERTEX_POINT('',#176580); +#176580 = CARTESIAN_POINT('',(-0.775,-0.7,0.9)); +#176581 = LINE('',#176582,#176583); +#176582 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176583 = VECTOR('',#176584,1.); +#176584 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176585 = ORIENTED_EDGE('',*,*,#176586,.T.); +#176586 = EDGE_CURVE('',#176579,#176587,#176589,.T.); +#176587 = VERTEX_POINT('',#176588); +#176588 = CARTESIAN_POINT('',(-0.775,-0.25,0.9)); +#176589 = LINE('',#176590,#176591); +#176590 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176591 = VECTOR('',#176592,1.); +#176592 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176593 = ORIENTED_EDGE('',*,*,#176594,.T.); +#176594 = EDGE_CURVE('',#176587,#176595,#176597,.T.); +#176595 = VERTEX_POINT('',#176596); +#176596 = CARTESIAN_POINT('',(-0.775,0.25,0.9)); +#176597 = LINE('',#176598,#176599); +#176598 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176599 = VECTOR('',#176600,1.); +#176600 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176601 = ORIENTED_EDGE('',*,*,#176602,.T.); +#176602 = EDGE_CURVE('',#176595,#176547,#176603,.T.); +#176603 = LINE('',#176604,#176605); +#176604 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176605 = VECTOR('',#176606,1.); +#176606 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176607 = ORIENTED_EDGE('',*,*,#176546,.T.); +#176608 = ORIENTED_EDGE('',*,*,#176072,.T.); +#176609 = ORIENTED_EDGE('',*,*,#176610,.T.); +#176610 = EDGE_CURVE('',#176065,#176611,#176613,.T.); +#176611 = VERTEX_POINT('',#176612); +#176612 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#176613 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176614,#176615), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176614 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#176615 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#176616 = ORIENTED_EDGE('',*,*,#176617,.F.); +#176617 = EDGE_CURVE('',#176618,#176611,#176620,.T.); +#176618 = VERTEX_POINT('',#176619); +#176619 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#176620 = LINE('',#176621,#176622); +#176621 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#176622 = VECTOR('',#176623,1.); +#176623 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#176624 = ORIENTED_EDGE('',*,*,#176625,.F.); +#176625 = EDGE_CURVE('',#176569,#176618,#176626,.T.); +#176626 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176627,#176628), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176627 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176628 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#176629 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#176630,#176631) + ,(#176632,#176633 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#176630 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#176631 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#176632 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#176633 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#176634 = ADVANCED_FACE('',(#176635),#176652,.F.); +#176635 = FACE_BOUND('',#176636,.F.); +#176636 = EDGE_LOOP('',(#176637,#176638,#176645,#176651)); +#176637 = ORIENTED_EDGE('',*,*,#176064,.T.); +#176638 = ORIENTED_EDGE('',*,*,#176639,.T.); +#176639 = EDGE_CURVE('',#176057,#176640,#176642,.T.); +#176640 = VERTEX_POINT('',#176641); +#176641 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#176642 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176643,#176644), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176643 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#176644 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#176645 = ORIENTED_EDGE('',*,*,#176646,.F.); +#176646 = EDGE_CURVE('',#176611,#176640,#176647,.T.); +#176647 = LINE('',#176648,#176649); +#176648 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#176649 = VECTOR('',#176650,1.); +#176650 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#176651 = ORIENTED_EDGE('',*,*,#176610,.F.); +#176652 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#176653,#176654) + ,(#176655,#176656 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#176653 = CARTESIAN_POINT('',(-0.775,1.3425,0.9)); +#176654 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55)); +#176655 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#176656 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#176657 = ADVANCED_FACE('',(#176658),#176675,.F.); +#176658 = FACE_BOUND('',#176659,.F.); +#176659 = EDGE_LOOP('',(#176660,#176661,#176668,#176674)); +#176660 = ORIENTED_EDGE('',*,*,#176056,.T.); +#176661 = ORIENTED_EDGE('',*,*,#176662,.T.); +#176662 = EDGE_CURVE('',#176049,#176663,#176665,.T.); +#176663 = VERTEX_POINT('',#176664); +#176664 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#176665 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176666,#176667), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176666 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#176667 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#176668 = ORIENTED_EDGE('',*,*,#176669,.F.); +#176669 = EDGE_CURVE('',#176640,#176663,#176670,.T.); +#176670 = LINE('',#176671,#176672); +#176671 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#176672 = VECTOR('',#176673,1.); +#176673 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#176674 = ORIENTED_EDGE('',*,*,#176639,.F.); +#176675 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#176676,#176677) + ,(#176678,#176679 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#176676 = CARTESIAN_POINT('',(-0.6925,1.425,0.9)); +#176677 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#176678 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#176679 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#176680 = ADVANCED_FACE('',(#176681),#176698,.F.); +#176681 = FACE_BOUND('',#176682,.F.); +#176682 = EDGE_LOOP('',(#176683,#176684,#176691,#176697)); +#176683 = ORIENTED_EDGE('',*,*,#176048,.T.); +#176684 = ORIENTED_EDGE('',*,*,#176685,.T.); +#176685 = EDGE_CURVE('',#176041,#176686,#176688,.T.); +#176686 = VERTEX_POINT('',#176687); +#176687 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#176688 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176689,#176690), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176689 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176690 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#176691 = ORIENTED_EDGE('',*,*,#176692,.F.); +#176692 = EDGE_CURVE('',#176663,#176686,#176693,.T.); +#176693 = LINE('',#176694,#176695); +#176694 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#176695 = VECTOR('',#176696,1.); +#176696 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#176697 = ORIENTED_EDGE('',*,*,#176662,.F.); +#176698 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#176699,#176700) + ,(#176701,#176702 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#176699 = CARTESIAN_POINT('',(0.6925,1.425,0.9)); +#176700 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55)); +#176701 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176702 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#176703 = ADVANCED_FACE('',(#176704),#176753,.F.); +#176704 = FACE_BOUND('',#176705,.F.); +#176705 = EDGE_LOOP('',(#176706,#176707,#176715,#176723,#176731,#176739, + #176746,#176752)); +#176706 = ORIENTED_EDGE('',*,*,#176040,.T.); +#176707 = ORIENTED_EDGE('',*,*,#176708,.T.); +#176708 = EDGE_CURVE('',#176033,#176709,#176711,.T.); +#176709 = VERTEX_POINT('',#176710); +#176710 = CARTESIAN_POINT('',(0.775,0.7,0.9)); +#176711 = LINE('',#176712,#176713); +#176712 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176713 = VECTOR('',#176714,1.); +#176714 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176715 = ORIENTED_EDGE('',*,*,#176716,.T.); +#176716 = EDGE_CURVE('',#176709,#176717,#176719,.T.); +#176717 = VERTEX_POINT('',#176718); +#176718 = CARTESIAN_POINT('',(0.775,-0.7,0.9)); +#176719 = LINE('',#176720,#176721); +#176720 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176721 = VECTOR('',#176722,1.); +#176722 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176723 = ORIENTED_EDGE('',*,*,#176724,.T.); +#176724 = EDGE_CURVE('',#176717,#176725,#176727,.T.); +#176725 = VERTEX_POINT('',#176726); +#176726 = CARTESIAN_POINT('',(0.775,-1.2,0.9)); +#176727 = LINE('',#176728,#176729); +#176728 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176729 = VECTOR('',#176730,1.); +#176730 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176731 = ORIENTED_EDGE('',*,*,#176732,.T.); +#176732 = EDGE_CURVE('',#176725,#176733,#176735,.T.); +#176733 = VERTEX_POINT('',#176734); +#176734 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#176735 = LINE('',#176736,#176737); +#176736 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176737 = VECTOR('',#176738,1.); +#176738 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176739 = ORIENTED_EDGE('',*,*,#176740,.T.); +#176740 = EDGE_CURVE('',#176733,#176741,#176743,.T.); +#176741 = VERTEX_POINT('',#176742); +#176742 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#176743 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#176744,#176745), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#176744 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#176745 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#176746 = ORIENTED_EDGE('',*,*,#176747,.F.); +#176747 = EDGE_CURVE('',#176686,#176741,#176748,.T.); +#176748 = LINE('',#176749,#176750); +#176749 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#176750 = VECTOR('',#176751,1.); +#176751 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176752 = ORIENTED_EDGE('',*,*,#176685,.F.); +#176753 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#176754,#176755) + ,(#176756,#176757 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#176754 = CARTESIAN_POINT('',(0.775,1.3425,0.9)); +#176755 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55)); +#176756 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#176757 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#176758 = ADVANCED_FACE('',(#176759),#176791,.F.); +#176759 = FACE_BOUND('',#176760,.F.); +#176760 = EDGE_LOOP('',(#176761,#176769,#176777,#176783,#176789,#176790) + ); +#176761 = ORIENTED_EDGE('',*,*,#176762,.F.); +#176762 = EDGE_CURVE('',#176763,#176025,#176765,.T.); +#176763 = VERTEX_POINT('',#176764); +#176764 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#176765 = LINE('',#176766,#176767); +#176766 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#176767 = VECTOR('',#176768,1.); +#176768 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176769 = ORIENTED_EDGE('',*,*,#176770,.T.); +#176770 = EDGE_CURVE('',#176763,#176771,#176773,.T.); +#176771 = VERTEX_POINT('',#176772); +#176772 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#176773 = LINE('',#176774,#176775); +#176774 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#176775 = VECTOR('',#176776,1.); +#176776 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#176777 = ORIENTED_EDGE('',*,*,#176778,.T.); +#176778 = EDGE_CURVE('',#176771,#176369,#176779,.T.); +#176779 = LINE('',#176780,#176781); +#176780 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#176781 = VECTOR('',#176782,1.); +#176782 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176783 = ORIENTED_EDGE('',*,*,#176784,.T.); +#176784 = EDGE_CURVE('',#176369,#176709,#176785,.T.); +#176785 = LINE('',#176786,#176787); +#176786 = CARTESIAN_POINT('',(0.85,0.7,0.9)); +#176787 = VECTOR('',#176788,1.); +#176788 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176789 = ORIENTED_EDGE('',*,*,#176708,.F.); +#176790 = ORIENTED_EDGE('',*,*,#176032,.F.); +#176791 = PLANE('',#176792); +#176792 = AXIS2_PLACEMENT_3D('',#176793,#176794,#176795); +#176793 = CARTESIAN_POINT('',(0.85,1.2,0.9)); +#176794 = DIRECTION('',(0.,0.,-1.)); +#176795 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#176796 = ADVANCED_FACE('',(#176797),#176840,.F.); +#176797 = FACE_BOUND('',#176798,.F.); +#176798 = EDGE_LOOP('',(#176799,#176805,#176806,#176807,#176808,#176809, + #176810,#176816,#176817,#176825,#176833,#176839)); +#176799 = ORIENTED_EDGE('',*,*,#176800,.F.); +#176800 = EDGE_CURVE('',#176431,#176725,#176801,.T.); +#176801 = LINE('',#176802,#176803); +#176802 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#176803 = VECTOR('',#176804,1.); +#176804 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176805 = ORIENTED_EDGE('',*,*,#176446,.T.); +#176806 = ORIENTED_EDGE('',*,*,#176491,.T.); +#176807 = ORIENTED_EDGE('',*,*,#176508,.T.); +#176808 = ORIENTED_EDGE('',*,*,#176462,.T.); +#176809 = ORIENTED_EDGE('',*,*,#176134,.T.); +#176810 = ORIENTED_EDGE('',*,*,#176811,.T.); +#176811 = EDGE_CURVE('',#176127,#176571,#176812,.T.); +#176812 = LINE('',#176813,#176814); +#176813 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#176814 = VECTOR('',#176815,1.); +#176815 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176816 = ORIENTED_EDGE('',*,*,#176568,.F.); +#176817 = ORIENTED_EDGE('',*,*,#176818,.F.); +#176818 = EDGE_CURVE('',#176819,#176569,#176821,.T.); +#176819 = VERTEX_POINT('',#176820); +#176820 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#176821 = LINE('',#176822,#176823); +#176822 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#176823 = VECTOR('',#176824,1.); +#176824 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#176825 = ORIENTED_EDGE('',*,*,#176826,.F.); +#176826 = EDGE_CURVE('',#176827,#176819,#176829,.T.); +#176827 = VERTEX_POINT('',#176828); +#176828 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#176829 = LINE('',#176830,#176831); +#176830 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#176831 = VECTOR('',#176832,1.); +#176832 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#176833 = ORIENTED_EDGE('',*,*,#176834,.F.); +#176834 = EDGE_CURVE('',#176733,#176827,#176835,.T.); +#176835 = LINE('',#176836,#176837); +#176836 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#176837 = VECTOR('',#176838,1.); +#176838 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#176839 = ORIENTED_EDGE('',*,*,#176732,.F.); +#176840 = PLANE('',#176841); +#176841 = AXIS2_PLACEMENT_3D('',#176842,#176843,#176844); +#176842 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#176843 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#176844 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#176845 = ADVANCED_FACE('',(#176846),#176932,.F.); +#176846 = FACE_BOUND('',#176847,.F.); +#176847 = EDGE_LOOP('',(#176848,#176849,#176850,#176859,#176867,#176876, + #176884,#176892,#176900,#176909,#176917,#176926)); +#176848 = ORIENTED_EDGE('',*,*,#176126,.F.); +#176849 = ORIENTED_EDGE('',*,*,#176148,.T.); +#176850 = ORIENTED_EDGE('',*,*,#176851,.T.); +#176851 = EDGE_CURVE('',#176149,#176852,#176854,.T.); +#176852 = VERTEX_POINT('',#176853); +#176853 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#176854 = CIRCLE('',#176855,0.1); +#176855 = AXIS2_PLACEMENT_3D('',#176856,#176857,#176858); +#176856 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#176857 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#176858 = DIRECTION('',(0.,0.,1.)); +#176859 = ORIENTED_EDGE('',*,*,#176860,.T.); +#176860 = EDGE_CURVE('',#176852,#176861,#176863,.T.); +#176861 = VERTEX_POINT('',#176862); +#176862 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#176863 = LINE('',#176864,#176865); +#176864 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#176865 = VECTOR('',#176866,1.); +#176866 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#176867 = ORIENTED_EDGE('',*,*,#176868,.T.); +#176868 = EDGE_CURVE('',#176861,#176869,#176871,.T.); +#176869 = VERTEX_POINT('',#176870); +#176870 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#176871 = CIRCLE('',#176872,0.25); +#176872 = AXIS2_PLACEMENT_3D('',#176873,#176874,#176875); +#176873 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#176874 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#176875 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#176876 = ORIENTED_EDGE('',*,*,#176877,.T.); +#176877 = EDGE_CURVE('',#176869,#176878,#176880,.T.); +#176878 = VERTEX_POINT('',#176879); +#176879 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#176880 = LINE('',#176881,#176882); +#176881 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#176882 = VECTOR('',#176883,1.); +#176883 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176884 = ORIENTED_EDGE('',*,*,#176885,.T.); +#176885 = EDGE_CURVE('',#176878,#176886,#176888,.T.); +#176886 = VERTEX_POINT('',#176887); +#176887 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#176888 = LINE('',#176889,#176890); +#176889 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#176890 = VECTOR('',#176891,1.); +#176891 = DIRECTION('',(0.,0.,1.)); +#176892 = ORIENTED_EDGE('',*,*,#176893,.T.); +#176893 = EDGE_CURVE('',#176886,#176894,#176896,.T.); +#176894 = VERTEX_POINT('',#176895); +#176895 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#176896 = LINE('',#176897,#176898); +#176897 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#176898 = VECTOR('',#176899,1.); +#176899 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176900 = ORIENTED_EDGE('',*,*,#176901,.T.); +#176901 = EDGE_CURVE('',#176894,#176902,#176904,.T.); +#176902 = VERTEX_POINT('',#176903); +#176903 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#176904 = CIRCLE('',#176905,0.1); +#176905 = AXIS2_PLACEMENT_3D('',#176906,#176907,#176908); +#176906 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#176907 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#176908 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#176909 = ORIENTED_EDGE('',*,*,#176910,.T.); +#176910 = EDGE_CURVE('',#176902,#176911,#176913,.T.); +#176911 = VERTEX_POINT('',#176912); +#176912 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#176913 = LINE('',#176914,#176915); +#176914 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#176915 = VECTOR('',#176916,1.); +#176916 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#176917 = ORIENTED_EDGE('',*,*,#176918,.T.); +#176918 = EDGE_CURVE('',#176911,#176919,#176921,.T.); +#176919 = VERTEX_POINT('',#176920); +#176920 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#176921 = CIRCLE('',#176922,0.25); +#176922 = AXIS2_PLACEMENT_3D('',#176923,#176924,#176925); +#176923 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#176924 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#176925 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#176926 = ORIENTED_EDGE('',*,*,#176927,.T.); +#176927 = EDGE_CURVE('',#176919,#176127,#176928,.T.); +#176928 = LINE('',#176929,#176930); +#176929 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#176930 = VECTOR('',#176931,1.); +#176931 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#176932 = PLANE('',#176933); +#176933 = AXIS2_PLACEMENT_3D('',#176934,#176935,#176936); +#176934 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315)); +#176935 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176936 = DIRECTION('',(0.,-0.,1.)); +#176937 = ADVANCED_FACE('',(#176938),#176957,.F.); +#176938 = FACE_BOUND('',#176939,.F.); +#176939 = EDGE_LOOP('',(#176940,#176941,#176950,#176956)); +#176940 = ORIENTED_EDGE('',*,*,#176165,.T.); +#176941 = ORIENTED_EDGE('',*,*,#176942,.T.); +#176942 = EDGE_CURVE('',#176158,#176943,#176945,.T.); +#176943 = VERTEX_POINT('',#176944); +#176944 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#176945 = CIRCLE('',#176946,0.1); +#176946 = AXIS2_PLACEMENT_3D('',#176947,#176948,#176949); +#176947 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#176948 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#176949 = DIRECTION('',(0.,0.,1.)); +#176950 = ORIENTED_EDGE('',*,*,#176951,.F.); +#176951 = EDGE_CURVE('',#176852,#176943,#176952,.T.); +#176952 = LINE('',#176953,#176954); +#176953 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#176954 = VECTOR('',#176955,1.); +#176955 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#176956 = ORIENTED_EDGE('',*,*,#176851,.F.); +#176957 = CYLINDRICAL_SURFACE('',#176958,0.1); +#176958 = AXIS2_PLACEMENT_3D('',#176959,#176960,#176961); +#176959 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#176960 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#176961 = DIRECTION('',(0.,0.,1.)); +#176962 = ADVANCED_FACE('',(#176963),#177041,.T.); +#176963 = FACE_BOUND('',#176964,.T.); +#176964 = EDGE_LOOP('',(#176965,#176966,#176967,#176968,#176976,#176985, + #176993,#177001,#177009,#177018,#177026,#177035)); +#176965 = ORIENTED_EDGE('',*,*,#176179,.F.); +#176966 = ORIENTED_EDGE('',*,*,#176157,.T.); +#176967 = ORIENTED_EDGE('',*,*,#176942,.T.); +#176968 = ORIENTED_EDGE('',*,*,#176969,.T.); +#176969 = EDGE_CURVE('',#176943,#176970,#176972,.T.); +#176970 = VERTEX_POINT('',#176971); +#176971 = CARTESIAN_POINT('',(-1.02432885403,-0.7,0.206587955583)); +#176972 = LINE('',#176973,#176974); +#176973 = CARTESIAN_POINT('',(-0.948480775301,-0.7,0.667364817767)); +#176974 = VECTOR('',#176975,1.); +#176975 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#176976 = ORIENTED_EDGE('',*,*,#176977,.T.); +#176977 = EDGE_CURVE('',#176970,#176978,#176980,.T.); +#176978 = VERTEX_POINT('',#176979); +#176979 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#176980 = CIRCLE('',#176981,0.25); +#176981 = AXIS2_PLACEMENT_3D('',#176982,#176983,#176984); +#176982 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#176983 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#176984 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#176985 = ORIENTED_EDGE('',*,*,#176986,.T.); +#176986 = EDGE_CURVE('',#176978,#176987,#176989,.T.); +#176987 = VERTEX_POINT('',#176988); +#176988 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#176989 = LINE('',#176990,#176991); +#176990 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.)); +#176991 = VECTOR('',#176992,1.); +#176992 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#176993 = ORIENTED_EDGE('',*,*,#176994,.T.); +#176994 = EDGE_CURVE('',#176987,#176995,#176997,.T.); +#176995 = VERTEX_POINT('',#176996); +#176996 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#176997 = LINE('',#176998,#176999); +#176998 = CARTESIAN_POINT('',(-1.4,-0.7,0.)); +#176999 = VECTOR('',#177000,1.); +#177000 = DIRECTION('',(0.,0.,1.)); +#177001 = ORIENTED_EDGE('',*,*,#177002,.T.); +#177002 = EDGE_CURVE('',#176995,#177003,#177005,.T.); +#177003 = VERTEX_POINT('',#177004); +#177004 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.15)); +#177005 = LINE('',#177006,#177007); +#177006 = CARTESIAN_POINT('',(-1.4,-0.7,0.15)); +#177007 = VECTOR('',#177008,1.); +#177008 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177009 = ORIENTED_EDGE('',*,*,#177010,.T.); +#177010 = EDGE_CURVE('',#177003,#177011,#177013,.T.); +#177011 = VERTEX_POINT('',#177012); +#177012 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#177013 = CIRCLE('',#177014,0.1); +#177014 = AXIS2_PLACEMENT_3D('',#177015,#177016,#177017); +#177015 = CARTESIAN_POINT('',(-1.270530792283,-0.7,0.25)); +#177016 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#177017 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#177018 = ORIENTED_EDGE('',*,*,#177019,.T.); +#177019 = EDGE_CURVE('',#177011,#177020,#177022,.T.); +#177020 = VERTEX_POINT('',#177021); +#177021 = CARTESIAN_POINT('',(-1.096201938253,-0.7,0.693412044417)); +#177022 = LINE('',#177023,#177024); +#177023 = CARTESIAN_POINT('',(-1.172050016982,-0.7,0.232635182233)); +#177024 = VECTOR('',#177025,1.); +#177025 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#177026 = ORIENTED_EDGE('',*,*,#177027,.T.); +#177027 = EDGE_CURVE('',#177020,#177028,#177030,.T.); +#177028 = VERTEX_POINT('',#177029); +#177029 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#177030 = CIRCLE('',#177031,0.25); +#177031 = AXIS2_PLACEMENT_3D('',#177032,#177033,#177034); +#177032 = CARTESIAN_POINT('',(-0.85,-0.7,0.65)); +#177033 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#177034 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177035 = ORIENTED_EDGE('',*,*,#177036,.T.); +#177036 = EDGE_CURVE('',#177028,#176180,#177037,.T.); +#177037 = LINE('',#177038,#177039); +#177038 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#177039 = VECTOR('',#177040,1.); +#177040 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177041 = PLANE('',#177042); +#177042 = AXIS2_PLACEMENT_3D('',#177043,#177044,#177045); +#177043 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315)); +#177044 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177045 = DIRECTION('',(0.,-0.,1.)); +#177046 = ADVANCED_FACE('',(#177047),#177063,.F.); +#177047 = FACE_BOUND('',#177048,.F.); +#177048 = EDGE_LOOP('',(#177049,#177050,#177056,#177057)); +#177049 = ORIENTED_EDGE('',*,*,#176196,.T.); +#177050 = ORIENTED_EDGE('',*,*,#177051,.T.); +#177051 = EDGE_CURVE('',#176189,#176587,#177052,.T.); +#177052 = LINE('',#177053,#177054); +#177053 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#177054 = VECTOR('',#177055,1.); +#177055 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177056 = ORIENTED_EDGE('',*,*,#176586,.F.); +#177057 = ORIENTED_EDGE('',*,*,#177058,.F.); +#177058 = EDGE_CURVE('',#176180,#176579,#177059,.T.); +#177059 = LINE('',#177060,#177061); +#177060 = CARTESIAN_POINT('',(-0.85,-0.7,0.9)); +#177061 = VECTOR('',#177062,1.); +#177062 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177063 = PLANE('',#177064); +#177064 = AXIS2_PLACEMENT_3D('',#177065,#177066,#177067); +#177065 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#177066 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#177067 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#177068 = ADVANCED_FACE('',(#177069),#177155,.F.); +#177069 = FACE_BOUND('',#177070,.F.); +#177070 = EDGE_LOOP('',(#177071,#177072,#177073,#177082,#177090,#177099, + #177107,#177115,#177123,#177132,#177140,#177149)); +#177071 = ORIENTED_EDGE('',*,*,#176188,.F.); +#177072 = ORIENTED_EDGE('',*,*,#176210,.T.); +#177073 = ORIENTED_EDGE('',*,*,#177074,.T.); +#177074 = EDGE_CURVE('',#176211,#177075,#177077,.T.); +#177075 = VERTEX_POINT('',#177076); +#177076 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#177077 = CIRCLE('',#177078,0.1); +#177078 = AXIS2_PLACEMENT_3D('',#177079,#177080,#177081); +#177079 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#177080 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177081 = DIRECTION('',(0.,0.,1.)); +#177082 = ORIENTED_EDGE('',*,*,#177083,.T.); +#177083 = EDGE_CURVE('',#177075,#177084,#177086,.T.); +#177084 = VERTEX_POINT('',#177085); +#177085 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#177086 = LINE('',#177087,#177088); +#177087 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#177088 = VECTOR('',#177089,1.); +#177089 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#177090 = ORIENTED_EDGE('',*,*,#177091,.T.); +#177091 = EDGE_CURVE('',#177084,#177092,#177094,.T.); +#177092 = VERTEX_POINT('',#177093); +#177093 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#177094 = CIRCLE('',#177095,0.25); +#177095 = AXIS2_PLACEMENT_3D('',#177096,#177097,#177098); +#177096 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#177097 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#177098 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#177099 = ORIENTED_EDGE('',*,*,#177100,.T.); +#177100 = EDGE_CURVE('',#177092,#177101,#177103,.T.); +#177101 = VERTEX_POINT('',#177102); +#177102 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#177103 = LINE('',#177104,#177105); +#177104 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#177105 = VECTOR('',#177106,1.); +#177106 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#177107 = ORIENTED_EDGE('',*,*,#177108,.T.); +#177108 = EDGE_CURVE('',#177101,#177109,#177111,.T.); +#177109 = VERTEX_POINT('',#177110); +#177110 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#177111 = LINE('',#177112,#177113); +#177112 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#177113 = VECTOR('',#177114,1.); +#177114 = DIRECTION('',(0.,0.,1.)); +#177115 = ORIENTED_EDGE('',*,*,#177116,.T.); +#177116 = EDGE_CURVE('',#177109,#177117,#177119,.T.); +#177117 = VERTEX_POINT('',#177118); +#177118 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#177119 = LINE('',#177120,#177121); +#177120 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#177121 = VECTOR('',#177122,1.); +#177122 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177123 = ORIENTED_EDGE('',*,*,#177124,.T.); +#177124 = EDGE_CURVE('',#177117,#177125,#177127,.T.); +#177125 = VERTEX_POINT('',#177126); +#177126 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#177127 = CIRCLE('',#177128,0.1); +#177128 = AXIS2_PLACEMENT_3D('',#177129,#177130,#177131); +#177129 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#177130 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#177131 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#177132 = ORIENTED_EDGE('',*,*,#177133,.T.); +#177133 = EDGE_CURVE('',#177125,#177134,#177136,.T.); +#177134 = VERTEX_POINT('',#177135); +#177135 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#177136 = LINE('',#177137,#177138); +#177137 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#177138 = VECTOR('',#177139,1.); +#177139 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#177140 = ORIENTED_EDGE('',*,*,#177141,.T.); +#177141 = EDGE_CURVE('',#177134,#177142,#177144,.T.); +#177142 = VERTEX_POINT('',#177143); +#177143 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#177144 = CIRCLE('',#177145,0.25); +#177145 = AXIS2_PLACEMENT_3D('',#177146,#177147,#177148); +#177146 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#177147 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#177148 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177149 = ORIENTED_EDGE('',*,*,#177150,.T.); +#177150 = EDGE_CURVE('',#177142,#176189,#177151,.T.); +#177151 = LINE('',#177152,#177153); +#177152 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#177153 = VECTOR('',#177154,1.); +#177154 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177155 = PLANE('',#177156); +#177156 = AXIS2_PLACEMENT_3D('',#177157,#177158,#177159); +#177157 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315)); +#177158 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177159 = DIRECTION('',(0.,-0.,1.)); +#177160 = ADVANCED_FACE('',(#177161),#177180,.F.); +#177161 = FACE_BOUND('',#177162,.F.); +#177162 = EDGE_LOOP('',(#177163,#177164,#177173,#177179)); +#177163 = ORIENTED_EDGE('',*,*,#176227,.T.); +#177164 = ORIENTED_EDGE('',*,*,#177165,.T.); +#177165 = EDGE_CURVE('',#176220,#177166,#177168,.T.); +#177166 = VERTEX_POINT('',#177167); +#177167 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#177168 = CIRCLE('',#177169,0.1); +#177169 = AXIS2_PLACEMENT_3D('',#177170,#177171,#177172); +#177170 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#177171 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177172 = DIRECTION('',(0.,0.,1.)); +#177173 = ORIENTED_EDGE('',*,*,#177174,.F.); +#177174 = EDGE_CURVE('',#177075,#177166,#177175,.T.); +#177175 = LINE('',#177176,#177177); +#177176 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#177177 = VECTOR('',#177178,1.); +#177178 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177179 = ORIENTED_EDGE('',*,*,#177074,.F.); +#177180 = CYLINDRICAL_SURFACE('',#177181,0.1); +#177181 = AXIS2_PLACEMENT_3D('',#177182,#177183,#177184); +#177182 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#177183 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177184 = DIRECTION('',(0.,0.,1.)); +#177185 = ADVANCED_FACE('',(#177186),#177264,.T.); +#177186 = FACE_BOUND('',#177187,.T.); +#177187 = EDGE_LOOP('',(#177188,#177189,#177190,#177191,#177199,#177208, + #177216,#177224,#177232,#177241,#177249,#177258)); +#177188 = ORIENTED_EDGE('',*,*,#176241,.F.); +#177189 = ORIENTED_EDGE('',*,*,#176219,.T.); +#177190 = ORIENTED_EDGE('',*,*,#177165,.T.); +#177191 = ORIENTED_EDGE('',*,*,#177192,.T.); +#177192 = EDGE_CURVE('',#177166,#177193,#177195,.T.); +#177193 = VERTEX_POINT('',#177194); +#177194 = CARTESIAN_POINT('',(-1.02432885403,0.25,0.206587955583)); +#177195 = LINE('',#177196,#177197); +#177196 = CARTESIAN_POINT('',(-0.948480775301,0.25,0.667364817767)); +#177197 = VECTOR('',#177198,1.); +#177198 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#177199 = ORIENTED_EDGE('',*,*,#177200,.T.); +#177200 = EDGE_CURVE('',#177193,#177201,#177203,.T.); +#177201 = VERTEX_POINT('',#177202); +#177202 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#177203 = CIRCLE('',#177204,0.25); +#177204 = AXIS2_PLACEMENT_3D('',#177205,#177206,#177207); +#177205 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#177206 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#177207 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#177208 = ORIENTED_EDGE('',*,*,#177209,.T.); +#177209 = EDGE_CURVE('',#177201,#177210,#177212,.T.); +#177210 = VERTEX_POINT('',#177211); +#177211 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#177212 = LINE('',#177213,#177214); +#177213 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.)); +#177214 = VECTOR('',#177215,1.); +#177215 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#177216 = ORIENTED_EDGE('',*,*,#177217,.T.); +#177217 = EDGE_CURVE('',#177210,#177218,#177220,.T.); +#177218 = VERTEX_POINT('',#177219); +#177219 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#177220 = LINE('',#177221,#177222); +#177221 = CARTESIAN_POINT('',(-1.4,0.25,0.)); +#177222 = VECTOR('',#177223,1.); +#177223 = DIRECTION('',(0.,0.,1.)); +#177224 = ORIENTED_EDGE('',*,*,#177225,.T.); +#177225 = EDGE_CURVE('',#177218,#177226,#177228,.T.); +#177226 = VERTEX_POINT('',#177227); +#177227 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.15)); +#177228 = LINE('',#177229,#177230); +#177229 = CARTESIAN_POINT('',(-1.4,0.25,0.15)); +#177230 = VECTOR('',#177231,1.); +#177231 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177232 = ORIENTED_EDGE('',*,*,#177233,.T.); +#177233 = EDGE_CURVE('',#177226,#177234,#177236,.T.); +#177234 = VERTEX_POINT('',#177235); +#177235 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#177236 = CIRCLE('',#177237,0.1); +#177237 = AXIS2_PLACEMENT_3D('',#177238,#177239,#177240); +#177238 = CARTESIAN_POINT('',(-1.270530792283,0.25,0.25)); +#177239 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#177240 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#177241 = ORIENTED_EDGE('',*,*,#177242,.T.); +#177242 = EDGE_CURVE('',#177234,#177243,#177245,.T.); +#177243 = VERTEX_POINT('',#177244); +#177244 = CARTESIAN_POINT('',(-1.096201938253,0.25,0.693412044417)); +#177245 = LINE('',#177246,#177247); +#177246 = CARTESIAN_POINT('',(-1.172050016982,0.25,0.232635182233)); +#177247 = VECTOR('',#177248,1.); +#177248 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#177249 = ORIENTED_EDGE('',*,*,#177250,.T.); +#177250 = EDGE_CURVE('',#177243,#177251,#177253,.T.); +#177251 = VERTEX_POINT('',#177252); +#177252 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#177253 = CIRCLE('',#177254,0.25); +#177254 = AXIS2_PLACEMENT_3D('',#177255,#177256,#177257); +#177255 = CARTESIAN_POINT('',(-0.85,0.25,0.65)); +#177256 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#177257 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177258 = ORIENTED_EDGE('',*,*,#177259,.T.); +#177259 = EDGE_CURVE('',#177251,#176242,#177260,.T.); +#177260 = LINE('',#177261,#177262); +#177261 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#177262 = VECTOR('',#177263,1.); +#177263 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177264 = PLANE('',#177265); +#177265 = AXIS2_PLACEMENT_3D('',#177266,#177267,#177268); +#177266 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315)); +#177267 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177268 = DIRECTION('',(0.,-0.,1.)); +#177269 = ADVANCED_FACE('',(#177270),#177281,.F.); +#177270 = FACE_BOUND('',#177271,.F.); +#177271 = EDGE_LOOP('',(#177272,#177273,#177274,#177275)); +#177272 = ORIENTED_EDGE('',*,*,#176258,.T.); +#177273 = ORIENTED_EDGE('',*,*,#176554,.T.); +#177274 = ORIENTED_EDGE('',*,*,#176602,.F.); +#177275 = ORIENTED_EDGE('',*,*,#177276,.F.); +#177276 = EDGE_CURVE('',#176242,#176595,#177277,.T.); +#177277 = LINE('',#177278,#177279); +#177278 = CARTESIAN_POINT('',(-0.85,0.25,0.9)); +#177279 = VECTOR('',#177280,1.); +#177280 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177281 = PLANE('',#177282); +#177282 = AXIS2_PLACEMENT_3D('',#177283,#177284,#177285); +#177283 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#177284 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#177285 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#177286 = ADVANCED_FACE('',(#177287),#177366,.F.); +#177287 = FACE_BOUND('',#177288,.F.); +#177288 = EDGE_LOOP('',(#177289,#177290,#177291,#177300,#177308,#177317, + #177325,#177333,#177341,#177350,#177358,#177365)); +#177289 = ORIENTED_EDGE('',*,*,#176250,.F.); +#177290 = ORIENTED_EDGE('',*,*,#176272,.T.); +#177291 = ORIENTED_EDGE('',*,*,#177292,.T.); +#177292 = EDGE_CURVE('',#176273,#177293,#177295,.T.); +#177293 = VERTEX_POINT('',#177294); +#177294 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#177295 = CIRCLE('',#177296,0.1); +#177296 = AXIS2_PLACEMENT_3D('',#177297,#177298,#177299); +#177297 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#177298 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177299 = DIRECTION('',(0.,0.,1.)); +#177300 = ORIENTED_EDGE('',*,*,#177301,.T.); +#177301 = EDGE_CURVE('',#177293,#177302,#177304,.T.); +#177302 = VERTEX_POINT('',#177303); +#177303 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#177304 = LINE('',#177305,#177306); +#177305 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#177306 = VECTOR('',#177307,1.); +#177307 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#177308 = ORIENTED_EDGE('',*,*,#177309,.T.); +#177309 = EDGE_CURVE('',#177302,#177310,#177312,.T.); +#177310 = VERTEX_POINT('',#177311); +#177311 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#177312 = CIRCLE('',#177313,0.25); +#177313 = AXIS2_PLACEMENT_3D('',#177314,#177315,#177316); +#177314 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#177315 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#177316 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#177317 = ORIENTED_EDGE('',*,*,#177318,.T.); +#177318 = EDGE_CURVE('',#177310,#177319,#177321,.T.); +#177319 = VERTEX_POINT('',#177320); +#177320 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#177321 = LINE('',#177322,#177323); +#177322 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#177323 = VECTOR('',#177324,1.); +#177324 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#177325 = ORIENTED_EDGE('',*,*,#177326,.T.); +#177326 = EDGE_CURVE('',#177319,#177327,#177329,.T.); +#177327 = VERTEX_POINT('',#177328); +#177328 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#177329 = LINE('',#177330,#177331); +#177330 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#177331 = VECTOR('',#177332,1.); +#177332 = DIRECTION('',(0.,0.,1.)); +#177333 = ORIENTED_EDGE('',*,*,#177334,.T.); +#177334 = EDGE_CURVE('',#177327,#177335,#177337,.T.); +#177335 = VERTEX_POINT('',#177336); +#177336 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#177337 = LINE('',#177338,#177339); +#177338 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#177339 = VECTOR('',#177340,1.); +#177340 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177341 = ORIENTED_EDGE('',*,*,#177342,.T.); +#177342 = EDGE_CURVE('',#177335,#177343,#177345,.T.); +#177343 = VERTEX_POINT('',#177344); +#177344 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#177345 = CIRCLE('',#177346,0.1); +#177346 = AXIS2_PLACEMENT_3D('',#177347,#177348,#177349); +#177347 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#177348 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#177349 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#177350 = ORIENTED_EDGE('',*,*,#177351,.T.); +#177351 = EDGE_CURVE('',#177343,#177352,#177354,.T.); +#177352 = VERTEX_POINT('',#177353); +#177353 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#177354 = LINE('',#177355,#177356); +#177355 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#177356 = VECTOR('',#177357,1.); +#177357 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#177358 = ORIENTED_EDGE('',*,*,#177359,.T.); +#177359 = EDGE_CURVE('',#177352,#176524,#177360,.T.); +#177360 = CIRCLE('',#177361,0.25); +#177361 = AXIS2_PLACEMENT_3D('',#177362,#177363,#177364); +#177362 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#177363 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#177364 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177365 = ORIENTED_EDGE('',*,*,#176523,.T.); +#177366 = PLANE('',#177367); +#177367 = AXIS2_PLACEMENT_3D('',#177368,#177369,#177370); +#177368 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315)); +#177369 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177370 = DIRECTION('',(0.,-0.,1.)); +#177371 = ADVANCED_FACE('',(#177372),#177391,.F.); +#177372 = FACE_BOUND('',#177373,.F.); +#177373 = EDGE_LOOP('',(#177374,#177375,#177384,#177390)); +#177374 = ORIENTED_EDGE('',*,*,#176289,.T.); +#177375 = ORIENTED_EDGE('',*,*,#177376,.T.); +#177376 = EDGE_CURVE('',#176282,#177377,#177379,.T.); +#177377 = VERTEX_POINT('',#177378); +#177378 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#177379 = CIRCLE('',#177380,0.1); +#177380 = AXIS2_PLACEMENT_3D('',#177381,#177382,#177383); +#177381 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#177382 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177383 = DIRECTION('',(0.,0.,1.)); +#177384 = ORIENTED_EDGE('',*,*,#177385,.F.); +#177385 = EDGE_CURVE('',#177293,#177377,#177386,.T.); +#177386 = LINE('',#177387,#177388); +#177387 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#177388 = VECTOR('',#177389,1.); +#177389 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177390 = ORIENTED_EDGE('',*,*,#177292,.F.); +#177391 = CYLINDRICAL_SURFACE('',#177392,0.1); +#177392 = AXIS2_PLACEMENT_3D('',#177393,#177394,#177395); +#177393 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#177394 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177395 = DIRECTION('',(0.,0.,1.)); +#177396 = ADVANCED_FACE('',(#177397),#177468,.T.); +#177397 = FACE_BOUND('',#177398,.T.); +#177398 = EDGE_LOOP('',(#177399,#177400,#177401,#177402,#177410,#177419, + #177427,#177435,#177443,#177452,#177460,#177467)); +#177399 = ORIENTED_EDGE('',*,*,#176303,.F.); +#177400 = ORIENTED_EDGE('',*,*,#176281,.T.); +#177401 = ORIENTED_EDGE('',*,*,#177376,.T.); +#177402 = ORIENTED_EDGE('',*,*,#177403,.T.); +#177403 = EDGE_CURVE('',#177377,#177404,#177406,.T.); +#177404 = VERTEX_POINT('',#177405); +#177405 = CARTESIAN_POINT('',(-1.02432885403,1.2,0.206587955583)); +#177406 = LINE('',#177407,#177408); +#177407 = CARTESIAN_POINT('',(-0.948480775301,1.2,0.667364817767)); +#177408 = VECTOR('',#177409,1.); +#177409 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#177410 = ORIENTED_EDGE('',*,*,#177411,.T.); +#177411 = EDGE_CURVE('',#177404,#177412,#177414,.T.); +#177412 = VERTEX_POINT('',#177413); +#177413 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#177414 = CIRCLE('',#177415,0.25); +#177415 = AXIS2_PLACEMENT_3D('',#177416,#177417,#177418); +#177416 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#177417 = DIRECTION('',(1.144237745222E-17,1.,1.24725095109E-33)); +#177418 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#177419 = ORIENTED_EDGE('',*,*,#177420,.T.); +#177420 = EDGE_CURVE('',#177412,#177421,#177423,.T.); +#177421 = VERTEX_POINT('',#177422); +#177422 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#177423 = LINE('',#177424,#177425); +#177424 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.)); +#177425 = VECTOR('',#177426,1.); +#177426 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#177427 = ORIENTED_EDGE('',*,*,#177428,.T.); +#177428 = EDGE_CURVE('',#177421,#177429,#177431,.T.); +#177429 = VERTEX_POINT('',#177430); +#177430 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#177431 = LINE('',#177432,#177433); +#177432 = CARTESIAN_POINT('',(-1.4,1.2,0.)); +#177433 = VECTOR('',#177434,1.); +#177434 = DIRECTION('',(0.,0.,1.)); +#177435 = ORIENTED_EDGE('',*,*,#177436,.T.); +#177436 = EDGE_CURVE('',#177429,#177437,#177439,.T.); +#177437 = VERTEX_POINT('',#177438); +#177438 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.15)); +#177439 = LINE('',#177440,#177441); +#177440 = CARTESIAN_POINT('',(-1.4,1.2,0.15)); +#177441 = VECTOR('',#177442,1.); +#177442 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177443 = ORIENTED_EDGE('',*,*,#177444,.T.); +#177444 = EDGE_CURVE('',#177437,#177445,#177447,.T.); +#177445 = VERTEX_POINT('',#177446); +#177446 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#177447 = CIRCLE('',#177448,0.1); +#177448 = AXIS2_PLACEMENT_3D('',#177449,#177450,#177451); +#177449 = CARTESIAN_POINT('',(-1.270530792283,1.2,0.25)); +#177450 = DIRECTION('',(-1.144237745222E-17,-1.,1.855131475086E-48)); +#177451 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#177452 = ORIENTED_EDGE('',*,*,#177453,.T.); +#177453 = EDGE_CURVE('',#177445,#177454,#177456,.T.); +#177454 = VERTEX_POINT('',#177455); +#177455 = CARTESIAN_POINT('',(-1.096201938253,1.2,0.693412044417)); +#177456 = LINE('',#177457,#177458); +#177457 = CARTESIAN_POINT('',(-1.172050016982,1.2,0.232635182233)); +#177458 = VECTOR('',#177459,1.); +#177459 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#177460 = ORIENTED_EDGE('',*,*,#177461,.T.); +#177461 = EDGE_CURVE('',#177454,#176532,#177462,.T.); +#177462 = CIRCLE('',#177463,0.25); +#177463 = AXIS2_PLACEMENT_3D('',#177464,#177465,#177466); +#177464 = CARTESIAN_POINT('',(-0.85,1.2,0.65)); +#177465 = DIRECTION('',(1.144237745222E-17,1.,8.679168028915E-34)); +#177466 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177467 = ORIENTED_EDGE('',*,*,#176539,.T.); +#177468 = PLANE('',#177469); +#177469 = AXIS2_PLACEMENT_3D('',#177470,#177471,#177472); +#177470 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315)); +#177471 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177472 = DIRECTION('',(0.,-0.,1.)); +#177473 = ADVANCED_FACE('',(#177474),#177553,.F.); +#177474 = FACE_BOUND('',#177475,.F.); +#177475 = EDGE_LOOP('',(#177476,#177477,#177478,#177487,#177495,#177504, + #177512,#177520,#177528,#177537,#177545,#177552)); +#177476 = ORIENTED_EDGE('',*,*,#176322,.F.); +#177477 = ORIENTED_EDGE('',*,*,#176337,.T.); +#177478 = ORIENTED_EDGE('',*,*,#177479,.T.); +#177479 = EDGE_CURVE('',#176338,#177480,#177482,.T.); +#177480 = VERTEX_POINT('',#177481); +#177481 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#177482 = CIRCLE('',#177483,0.1); +#177483 = AXIS2_PLACEMENT_3D('',#177484,#177485,#177486); +#177484 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#177485 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177486 = DIRECTION('',(0.,0.,1.)); +#177487 = ORIENTED_EDGE('',*,*,#177488,.T.); +#177488 = EDGE_CURVE('',#177480,#177489,#177491,.T.); +#177489 = VERTEX_POINT('',#177490); +#177490 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#177491 = LINE('',#177492,#177493); +#177492 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#177493 = VECTOR('',#177494,1.); +#177494 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#177495 = ORIENTED_EDGE('',*,*,#177496,.T.); +#177496 = EDGE_CURVE('',#177489,#177497,#177499,.T.); +#177497 = VERTEX_POINT('',#177498); +#177498 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#177499 = CIRCLE('',#177500,0.25); +#177500 = AXIS2_PLACEMENT_3D('',#177501,#177502,#177503); +#177501 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#177502 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177503 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#177504 = ORIENTED_EDGE('',*,*,#177505,.T.); +#177505 = EDGE_CURVE('',#177497,#177506,#177508,.T.); +#177506 = VERTEX_POINT('',#177507); +#177507 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#177508 = LINE('',#177509,#177510); +#177509 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#177510 = VECTOR('',#177511,1.); +#177511 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#177512 = ORIENTED_EDGE('',*,*,#177513,.T.); +#177513 = EDGE_CURVE('',#177506,#177514,#177516,.T.); +#177514 = VERTEX_POINT('',#177515); +#177515 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#177516 = LINE('',#177517,#177518); +#177517 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#177518 = VECTOR('',#177519,1.); +#177519 = DIRECTION('',(0.,0.,1.)); +#177520 = ORIENTED_EDGE('',*,*,#177521,.T.); +#177521 = EDGE_CURVE('',#177514,#177522,#177524,.T.); +#177522 = VERTEX_POINT('',#177523); +#177523 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#177524 = LINE('',#177525,#177526); +#177525 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#177526 = VECTOR('',#177527,1.); +#177527 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177528 = ORIENTED_EDGE('',*,*,#177529,.T.); +#177529 = EDGE_CURVE('',#177522,#177530,#177532,.T.); +#177530 = VERTEX_POINT('',#177531); +#177531 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#177532 = CIRCLE('',#177533,0.1); +#177533 = AXIS2_PLACEMENT_3D('',#177534,#177535,#177536); +#177534 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#177535 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#177536 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#177537 = ORIENTED_EDGE('',*,*,#177538,.T.); +#177538 = EDGE_CURVE('',#177530,#177539,#177541,.T.); +#177539 = VERTEX_POINT('',#177540); +#177540 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#177541 = LINE('',#177542,#177543); +#177542 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#177543 = VECTOR('',#177544,1.); +#177544 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#177545 = ORIENTED_EDGE('',*,*,#177546,.T.); +#177546 = EDGE_CURVE('',#177539,#176763,#177547,.T.); +#177547 = CIRCLE('',#177548,0.25); +#177548 = AXIS2_PLACEMENT_3D('',#177549,#177550,#177551); +#177549 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#177550 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177551 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#177552 = ORIENTED_EDGE('',*,*,#176762,.T.); +#177553 = PLANE('',#177554); +#177554 = AXIS2_PLACEMENT_3D('',#177555,#177556,#177557); +#177555 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315)); +#177556 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177557 = DIRECTION('',(0.,0.,1.)); +#177558 = ADVANCED_FACE('',(#177559),#177578,.F.); +#177559 = FACE_BOUND('',#177560,.F.); +#177560 = EDGE_LOOP('',(#177561,#177562,#177571,#177577)); +#177561 = ORIENTED_EDGE('',*,*,#176354,.T.); +#177562 = ORIENTED_EDGE('',*,*,#177563,.T.); +#177563 = EDGE_CURVE('',#176347,#177564,#177566,.T.); +#177564 = VERTEX_POINT('',#177565); +#177565 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#177566 = CIRCLE('',#177567,0.1); +#177567 = AXIS2_PLACEMENT_3D('',#177568,#177569,#177570); +#177568 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#177569 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177570 = DIRECTION('',(0.,0.,1.)); +#177571 = ORIENTED_EDGE('',*,*,#177572,.F.); +#177572 = EDGE_CURVE('',#177480,#177564,#177573,.T.); +#177573 = LINE('',#177574,#177575); +#177574 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#177575 = VECTOR('',#177576,1.); +#177576 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177577 = ORIENTED_EDGE('',*,*,#177479,.F.); +#177578 = CYLINDRICAL_SURFACE('',#177579,0.1); +#177579 = AXIS2_PLACEMENT_3D('',#177580,#177581,#177582); +#177580 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#177581 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177582 = DIRECTION('',(0.,0.,1.)); +#177583 = ADVANCED_FACE('',(#177584),#177655,.T.); +#177584 = FACE_BOUND('',#177585,.T.); +#177585 = EDGE_LOOP('',(#177586,#177587,#177588,#177589,#177597,#177606, + #177614,#177622,#177630,#177639,#177647,#177654)); +#177586 = ORIENTED_EDGE('',*,*,#176368,.F.); +#177587 = ORIENTED_EDGE('',*,*,#176346,.T.); +#177588 = ORIENTED_EDGE('',*,*,#177563,.T.); +#177589 = ORIENTED_EDGE('',*,*,#177590,.T.); +#177590 = EDGE_CURVE('',#177564,#177591,#177593,.T.); +#177591 = VERTEX_POINT('',#177592); +#177592 = CARTESIAN_POINT('',(1.02432885403,0.7,0.206587955583)); +#177593 = LINE('',#177594,#177595); +#177594 = CARTESIAN_POINT('',(0.948480775301,0.7,0.667364817767)); +#177595 = VECTOR('',#177596,1.); +#177596 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#177597 = ORIENTED_EDGE('',*,*,#177598,.T.); +#177598 = EDGE_CURVE('',#177591,#177599,#177601,.T.); +#177599 = VERTEX_POINT('',#177600); +#177600 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#177601 = CIRCLE('',#177602,0.25); +#177602 = AXIS2_PLACEMENT_3D('',#177603,#177604,#177605); +#177603 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#177604 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177605 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#177606 = ORIENTED_EDGE('',*,*,#177607,.T.); +#177607 = EDGE_CURVE('',#177599,#177608,#177610,.T.); +#177608 = VERTEX_POINT('',#177609); +#177609 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#177610 = LINE('',#177611,#177612); +#177611 = CARTESIAN_POINT('',(1.270530792283,0.7,0.)); +#177612 = VECTOR('',#177613,1.); +#177613 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#177614 = ORIENTED_EDGE('',*,*,#177615,.T.); +#177615 = EDGE_CURVE('',#177608,#177616,#177618,.T.); +#177616 = VERTEX_POINT('',#177617); +#177617 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#177618 = LINE('',#177619,#177620); +#177619 = CARTESIAN_POINT('',(1.4,0.7,0.)); +#177620 = VECTOR('',#177621,1.); +#177621 = DIRECTION('',(0.,0.,1.)); +#177622 = ORIENTED_EDGE('',*,*,#177623,.T.); +#177623 = EDGE_CURVE('',#177616,#177624,#177626,.T.); +#177624 = VERTEX_POINT('',#177625); +#177625 = CARTESIAN_POINT('',(1.270530792283,0.7,0.15)); +#177626 = LINE('',#177627,#177628); +#177627 = CARTESIAN_POINT('',(1.4,0.7,0.15)); +#177628 = VECTOR('',#177629,1.); +#177629 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177630 = ORIENTED_EDGE('',*,*,#177631,.T.); +#177631 = EDGE_CURVE('',#177624,#177632,#177634,.T.); +#177632 = VERTEX_POINT('',#177633); +#177633 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#177634 = CIRCLE('',#177635,0.1); +#177635 = AXIS2_PLACEMENT_3D('',#177636,#177637,#177638); +#177636 = CARTESIAN_POINT('',(1.270530792283,0.7,0.25)); +#177637 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#177638 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#177639 = ORIENTED_EDGE('',*,*,#177640,.T.); +#177640 = EDGE_CURVE('',#177632,#177641,#177643,.T.); +#177641 = VERTEX_POINT('',#177642); +#177642 = CARTESIAN_POINT('',(1.096201938253,0.7,0.693412044417)); +#177643 = LINE('',#177644,#177645); +#177644 = CARTESIAN_POINT('',(1.172050016982,0.7,0.232635182233)); +#177645 = VECTOR('',#177646,1.); +#177646 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#177647 = ORIENTED_EDGE('',*,*,#177648,.T.); +#177648 = EDGE_CURVE('',#177641,#176771,#177649,.T.); +#177649 = CIRCLE('',#177650,0.25); +#177650 = AXIS2_PLACEMENT_3D('',#177651,#177652,#177653); +#177651 = CARTESIAN_POINT('',(0.85,0.7,0.65)); +#177652 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177653 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#177654 = ORIENTED_EDGE('',*,*,#176778,.T.); +#177655 = PLANE('',#177656); +#177656 = AXIS2_PLACEMENT_3D('',#177657,#177658,#177659); +#177657 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315)); +#177658 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177659 = DIRECTION('',(0.,0.,1.)); +#177660 = ADVANCED_FACE('',(#177661),#177672,.F.); +#177661 = FACE_BOUND('',#177662,.F.); +#177662 = EDGE_LOOP('',(#177663,#177664,#177665,#177671)); +#177663 = ORIENTED_EDGE('',*,*,#176784,.F.); +#177664 = ORIENTED_EDGE('',*,*,#176385,.T.); +#177665 = ORIENTED_EDGE('',*,*,#177666,.T.); +#177666 = EDGE_CURVE('',#176378,#176717,#177667,.T.); +#177667 = LINE('',#177668,#177669); +#177668 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#177669 = VECTOR('',#177670,1.); +#177670 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177671 = ORIENTED_EDGE('',*,*,#176716,.F.); +#177672 = PLANE('',#177673); +#177673 = AXIS2_PLACEMENT_3D('',#177674,#177675,#177676); +#177674 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9)); +#177675 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.)); +#177676 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18)); +#177677 = ADVANCED_FACE('',(#177678),#177764,.F.); +#177678 = FACE_BOUND('',#177679,.F.); +#177679 = EDGE_LOOP('',(#177680,#177681,#177682,#177691,#177699,#177708, + #177716,#177724,#177732,#177741,#177749,#177758)); +#177680 = ORIENTED_EDGE('',*,*,#176377,.F.); +#177681 = ORIENTED_EDGE('',*,*,#176399,.T.); +#177682 = ORIENTED_EDGE('',*,*,#177683,.T.); +#177683 = EDGE_CURVE('',#176400,#177684,#177686,.T.); +#177684 = VERTEX_POINT('',#177685); +#177685 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#177686 = CIRCLE('',#177687,0.1); +#177687 = AXIS2_PLACEMENT_3D('',#177688,#177689,#177690); +#177688 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#177689 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177690 = DIRECTION('',(0.,0.,1.)); +#177691 = ORIENTED_EDGE('',*,*,#177692,.T.); +#177692 = EDGE_CURVE('',#177684,#177693,#177695,.T.); +#177693 = VERTEX_POINT('',#177694); +#177694 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#177695 = LINE('',#177696,#177697); +#177696 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#177697 = VECTOR('',#177698,1.); +#177698 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#177699 = ORIENTED_EDGE('',*,*,#177700,.T.); +#177700 = EDGE_CURVE('',#177693,#177701,#177703,.T.); +#177701 = VERTEX_POINT('',#177702); +#177702 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#177703 = CIRCLE('',#177704,0.25); +#177704 = AXIS2_PLACEMENT_3D('',#177705,#177706,#177707); +#177705 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#177706 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177707 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#177708 = ORIENTED_EDGE('',*,*,#177709,.T.); +#177709 = EDGE_CURVE('',#177701,#177710,#177712,.T.); +#177710 = VERTEX_POINT('',#177711); +#177711 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#177712 = LINE('',#177713,#177714); +#177713 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#177714 = VECTOR('',#177715,1.); +#177715 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#177716 = ORIENTED_EDGE('',*,*,#177717,.T.); +#177717 = EDGE_CURVE('',#177710,#177718,#177720,.T.); +#177718 = VERTEX_POINT('',#177719); +#177719 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#177720 = LINE('',#177721,#177722); +#177721 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#177722 = VECTOR('',#177723,1.); +#177723 = DIRECTION('',(0.,0.,1.)); +#177724 = ORIENTED_EDGE('',*,*,#177725,.T.); +#177725 = EDGE_CURVE('',#177718,#177726,#177728,.T.); +#177726 = VERTEX_POINT('',#177727); +#177727 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#177728 = LINE('',#177729,#177730); +#177729 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#177730 = VECTOR('',#177731,1.); +#177731 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177732 = ORIENTED_EDGE('',*,*,#177733,.T.); +#177733 = EDGE_CURVE('',#177726,#177734,#177736,.T.); +#177734 = VERTEX_POINT('',#177735); +#177735 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#177736 = CIRCLE('',#177737,0.1); +#177737 = AXIS2_PLACEMENT_3D('',#177738,#177739,#177740); +#177738 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#177739 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#177740 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#177741 = ORIENTED_EDGE('',*,*,#177742,.T.); +#177742 = EDGE_CURVE('',#177734,#177743,#177745,.T.); +#177743 = VERTEX_POINT('',#177744); +#177744 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#177745 = LINE('',#177746,#177747); +#177746 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#177747 = VECTOR('',#177748,1.); +#177748 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#177749 = ORIENTED_EDGE('',*,*,#177750,.T.); +#177750 = EDGE_CURVE('',#177743,#177751,#177753,.T.); +#177751 = VERTEX_POINT('',#177752); +#177752 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#177753 = CIRCLE('',#177754,0.25); +#177754 = AXIS2_PLACEMENT_3D('',#177755,#177756,#177757); +#177755 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#177756 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177757 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#177758 = ORIENTED_EDGE('',*,*,#177759,.T.); +#177759 = EDGE_CURVE('',#177751,#176378,#177760,.T.); +#177760 = LINE('',#177761,#177762); +#177761 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#177762 = VECTOR('',#177763,1.); +#177763 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177764 = PLANE('',#177765); +#177765 = AXIS2_PLACEMENT_3D('',#177766,#177767,#177768); +#177766 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315)); +#177767 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177768 = DIRECTION('',(0.,0.,1.)); +#177769 = ADVANCED_FACE('',(#177770),#177789,.F.); +#177770 = FACE_BOUND('',#177771,.F.); +#177771 = EDGE_LOOP('',(#177772,#177773,#177782,#177788)); +#177772 = ORIENTED_EDGE('',*,*,#176416,.T.); +#177773 = ORIENTED_EDGE('',*,*,#177774,.T.); +#177774 = EDGE_CURVE('',#176409,#177775,#177777,.T.); +#177775 = VERTEX_POINT('',#177776); +#177776 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#177777 = CIRCLE('',#177778,0.1); +#177778 = AXIS2_PLACEMENT_3D('',#177779,#177780,#177781); +#177779 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#177780 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177781 = DIRECTION('',(0.,0.,1.)); +#177782 = ORIENTED_EDGE('',*,*,#177783,.F.); +#177783 = EDGE_CURVE('',#177684,#177775,#177784,.T.); +#177784 = LINE('',#177785,#177786); +#177785 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#177786 = VECTOR('',#177787,1.); +#177787 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177788 = ORIENTED_EDGE('',*,*,#177683,.F.); +#177789 = CYLINDRICAL_SURFACE('',#177790,0.1); +#177790 = AXIS2_PLACEMENT_3D('',#177791,#177792,#177793); +#177791 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#177792 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#177793 = DIRECTION('',(0.,0.,1.)); +#177794 = ADVANCED_FACE('',(#177795),#177873,.T.); +#177795 = FACE_BOUND('',#177796,.T.); +#177796 = EDGE_LOOP('',(#177797,#177798,#177799,#177800,#177808,#177817, + #177825,#177833,#177841,#177850,#177858,#177867)); +#177797 = ORIENTED_EDGE('',*,*,#176430,.F.); +#177798 = ORIENTED_EDGE('',*,*,#176408,.T.); +#177799 = ORIENTED_EDGE('',*,*,#177774,.T.); +#177800 = ORIENTED_EDGE('',*,*,#177801,.T.); +#177801 = EDGE_CURVE('',#177775,#177802,#177804,.T.); +#177802 = VERTEX_POINT('',#177803); +#177803 = CARTESIAN_POINT('',(1.02432885403,-1.2,0.206587955583)); +#177804 = LINE('',#177805,#177806); +#177805 = CARTESIAN_POINT('',(0.948480775301,-1.2,0.667364817767)); +#177806 = VECTOR('',#177807,1.); +#177807 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#177808 = ORIENTED_EDGE('',*,*,#177809,.T.); +#177809 = EDGE_CURVE('',#177802,#177810,#177812,.T.); +#177810 = VERTEX_POINT('',#177811); +#177811 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#177812 = CIRCLE('',#177813,0.25); +#177813 = AXIS2_PLACEMENT_3D('',#177814,#177815,#177816); +#177814 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#177815 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177816 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#177817 = ORIENTED_EDGE('',*,*,#177818,.T.); +#177818 = EDGE_CURVE('',#177810,#177819,#177821,.T.); +#177819 = VERTEX_POINT('',#177820); +#177820 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#177821 = LINE('',#177822,#177823); +#177822 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.)); +#177823 = VECTOR('',#177824,1.); +#177824 = DIRECTION('',(1.,1.110223024625E-16,0.)); +#177825 = ORIENTED_EDGE('',*,*,#177826,.T.); +#177826 = EDGE_CURVE('',#177819,#177827,#177829,.T.); +#177827 = VERTEX_POINT('',#177828); +#177828 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#177829 = LINE('',#177830,#177831); +#177830 = CARTESIAN_POINT('',(1.4,-1.2,0.)); +#177831 = VECTOR('',#177832,1.); +#177832 = DIRECTION('',(0.,0.,1.)); +#177833 = ORIENTED_EDGE('',*,*,#177834,.T.); +#177834 = EDGE_CURVE('',#177827,#177835,#177837,.T.); +#177835 = VERTEX_POINT('',#177836); +#177836 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.15)); +#177837 = LINE('',#177838,#177839); +#177838 = CARTESIAN_POINT('',(1.4,-1.2,0.15)); +#177839 = VECTOR('',#177840,1.); +#177840 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177841 = ORIENTED_EDGE('',*,*,#177842,.T.); +#177842 = EDGE_CURVE('',#177835,#177843,#177845,.T.); +#177843 = VERTEX_POINT('',#177844); +#177844 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#177845 = CIRCLE('',#177846,0.1); +#177846 = AXIS2_PLACEMENT_3D('',#177847,#177848,#177849); +#177847 = CARTESIAN_POINT('',(1.270530792283,-1.2,0.25)); +#177848 = DIRECTION('',(-1.110223024625E-16,1.,-1.094764425744E-47)); +#177849 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#177850 = ORIENTED_EDGE('',*,*,#177851,.T.); +#177851 = EDGE_CURVE('',#177843,#177852,#177854,.T.); +#177852 = VERTEX_POINT('',#177853); +#177853 = CARTESIAN_POINT('',(1.096201938253,-1.2,0.693412044417)); +#177854 = LINE('',#177855,#177856); +#177855 = CARTESIAN_POINT('',(1.172050016982,-1.2,0.232635182233)); +#177856 = VECTOR('',#177857,1.); +#177857 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#177858 = ORIENTED_EDGE('',*,*,#177859,.T.); +#177859 = EDGE_CURVE('',#177852,#177860,#177862,.T.); +#177860 = VERTEX_POINT('',#177861); +#177861 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#177862 = CIRCLE('',#177863,0.25); +#177863 = AXIS2_PLACEMENT_3D('',#177864,#177865,#177866); +#177864 = CARTESIAN_POINT('',(0.85,-1.2,0.65)); +#177865 = DIRECTION('',(1.110223024625E-16,-1.,-6.255634725081E-34)); +#177866 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#177867 = ORIENTED_EDGE('',*,*,#177868,.T.); +#177868 = EDGE_CURVE('',#177860,#176431,#177869,.T.); +#177869 = LINE('',#177870,#177871); +#177870 = CARTESIAN_POINT('',(0.85,-1.2,0.9)); +#177871 = VECTOR('',#177872,1.); +#177872 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177873 = PLANE('',#177874); +#177874 = AXIS2_PLACEMENT_3D('',#177875,#177876,#177877); +#177875 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315)); +#177876 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177877 = DIRECTION('',(0.,0.,1.)); +#177878 = ADVANCED_FACE('',(#177879),#177890,.T.); +#177879 = FACE_BOUND('',#177880,.T.); +#177880 = EDGE_LOOP('',(#177881,#177882,#177883,#177884)); +#177881 = ORIENTED_EDGE('',*,*,#177359,.T.); +#177882 = ORIENTED_EDGE('',*,*,#176531,.T.); +#177883 = ORIENTED_EDGE('',*,*,#177461,.F.); +#177884 = ORIENTED_EDGE('',*,*,#177885,.F.); +#177885 = EDGE_CURVE('',#177352,#177454,#177886,.T.); +#177886 = LINE('',#177887,#177888); +#177887 = CARTESIAN_POINT('',(-1.096201938253,0.7,0.693412044417)); +#177888 = VECTOR('',#177889,1.); +#177889 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177890 = CYLINDRICAL_SURFACE('',#177891,0.25); +#177891 = AXIS2_PLACEMENT_3D('',#177892,#177893,#177894); +#177892 = CARTESIAN_POINT('',(-0.85,0.7,0.65)); +#177893 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#177894 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#177895 = ADVANCED_FACE('',(#177896),#177909,.F.); +#177896 = FACE_BOUND('',#177897,.F.); +#177897 = EDGE_LOOP('',(#177898,#177899,#177905,#177906,#177907,#177908) + ); +#177898 = ORIENTED_EDGE('',*,*,#176927,.F.); +#177899 = ORIENTED_EDGE('',*,*,#177900,.T.); +#177900 = EDGE_CURVE('',#176919,#177028,#177901,.T.); +#177901 = LINE('',#177902,#177903); +#177902 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#177903 = VECTOR('',#177904,1.); +#177904 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177905 = ORIENTED_EDGE('',*,*,#177036,.T.); +#177906 = ORIENTED_EDGE('',*,*,#177058,.T.); +#177907 = ORIENTED_EDGE('',*,*,#176578,.F.); +#177908 = ORIENTED_EDGE('',*,*,#176811,.F.); +#177909 = PLANE('',#177910); +#177910 = AXIS2_PLACEMENT_3D('',#177911,#177912,#177913); +#177911 = CARTESIAN_POINT('',(-0.85,-1.2,0.9)); +#177912 = DIRECTION('',(0.,0.,-1.)); +#177913 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177914 = ADVANCED_FACE('',(#177915),#177928,.F.); +#177915 = FACE_BOUND('',#177916,.F.); +#177916 = EDGE_LOOP('',(#177917,#177918,#177924,#177925,#177926,#177927) + ); +#177917 = ORIENTED_EDGE('',*,*,#177150,.F.); +#177918 = ORIENTED_EDGE('',*,*,#177919,.T.); +#177919 = EDGE_CURVE('',#177142,#177251,#177920,.T.); +#177920 = LINE('',#177921,#177922); +#177921 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#177922 = VECTOR('',#177923,1.); +#177923 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#177924 = ORIENTED_EDGE('',*,*,#177259,.T.); +#177925 = ORIENTED_EDGE('',*,*,#177276,.T.); +#177926 = ORIENTED_EDGE('',*,*,#176594,.F.); +#177927 = ORIENTED_EDGE('',*,*,#177051,.F.); +#177928 = PLANE('',#177929); +#177929 = AXIS2_PLACEMENT_3D('',#177930,#177931,#177932); +#177930 = CARTESIAN_POINT('',(-0.85,-0.25,0.9)); +#177931 = DIRECTION('',(0.,0.,-1.)); +#177932 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#177933 = ADVANCED_FACE('',(#177934,#177963),#177974,.T.); +#177934 = FACE_BOUND('',#177935,.T.); +#177935 = EDGE_LOOP('',(#177936,#177937,#177938,#177939,#177947,#177955, + #177961,#177962)); +#177936 = ORIENTED_EDGE('',*,*,#176669,.F.); +#177937 = ORIENTED_EDGE('',*,*,#176646,.F.); +#177938 = ORIENTED_EDGE('',*,*,#176617,.F.); +#177939 = ORIENTED_EDGE('',*,*,#177940,.F.); +#177940 = EDGE_CURVE('',#177941,#176618,#177943,.T.); +#177941 = VERTEX_POINT('',#177942); +#177942 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#177943 = LINE('',#177944,#177945); +#177944 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#177945 = VECTOR('',#177946,1.); +#177946 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#177947 = ORIENTED_EDGE('',*,*,#177948,.F.); +#177948 = EDGE_CURVE('',#177949,#177941,#177951,.T.); +#177949 = VERTEX_POINT('',#177950); +#177950 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#177951 = LINE('',#177952,#177953); +#177952 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#177953 = VECTOR('',#177954,1.); +#177954 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#177955 = ORIENTED_EDGE('',*,*,#177956,.F.); +#177956 = EDGE_CURVE('',#176741,#177949,#177957,.T.); +#177957 = LINE('',#177958,#177959); +#177958 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#177959 = VECTOR('',#177960,1.); +#177960 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#177961 = ORIENTED_EDGE('',*,*,#176747,.F.); +#177962 = ORIENTED_EDGE('',*,*,#176692,.F.); +#177963 = FACE_BOUND('',#177964,.T.); +#177964 = EDGE_LOOP('',(#177965)); +#177965 = ORIENTED_EDGE('',*,*,#177966,.T.); +#177966 = EDGE_CURVE('',#177967,#177967,#177969,.T.); +#177967 = VERTEX_POINT('',#177968); +#177968 = CARTESIAN_POINT('',(-0.483648457443,1.083648457443,1.55)); +#177969 = CIRCLE('',#177970,5.E-02); +#177970 = AXIS2_PLACEMENT_3D('',#177971,#177972,#177973); +#177971 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#177972 = DIRECTION('',(0.,-0.,-1.)); +#177973 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#177974 = PLANE('',#177975); +#177975 = AXIS2_PLACEMENT_3D('',#177976,#177977,#177978); +#177976 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55)); +#177977 = DIRECTION('',(0.,0.,1.)); +#177978 = DIRECTION('',(0.436386464522,-0.899759330922,0.)); +#177979 = ADVANCED_FACE('',(#177980),#177990,.F.); +#177980 = FACE_BOUND('',#177981,.F.); +#177981 = EDGE_LOOP('',(#177982,#177983,#177984,#177985)); +#177982 = ORIENTED_EDGE('',*,*,#176818,.T.); +#177983 = ORIENTED_EDGE('',*,*,#176625,.T.); +#177984 = ORIENTED_EDGE('',*,*,#177940,.F.); +#177985 = ORIENTED_EDGE('',*,*,#177986,.F.); +#177986 = EDGE_CURVE('',#176819,#177941,#177987,.T.); +#177987 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#177988,#177989), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#177988 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#177989 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#177990 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#177991,#177992) + ,(#177993,#177994 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#177991 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#177992 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#177993 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9)); +#177994 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55)); +#177995 = ADVANCED_FACE('',(#177996),#178009,.F.); +#177996 = FACE_BOUND('',#177997,.F.); +#177997 = EDGE_LOOP('',(#177998,#177999,#178005,#178006,#178007,#178008) + ); +#177998 = ORIENTED_EDGE('',*,*,#177759,.F.); +#177999 = ORIENTED_EDGE('',*,*,#178000,.T.); +#178000 = EDGE_CURVE('',#177751,#177860,#178001,.T.); +#178001 = LINE('',#178002,#178003); +#178002 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#178003 = VECTOR('',#178004,1.); +#178004 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178005 = ORIENTED_EDGE('',*,*,#177868,.T.); +#178006 = ORIENTED_EDGE('',*,*,#176800,.T.); +#178007 = ORIENTED_EDGE('',*,*,#176724,.F.); +#178008 = ORIENTED_EDGE('',*,*,#177666,.F.); +#178009 = PLANE('',#178010); +#178010 = AXIS2_PLACEMENT_3D('',#178011,#178012,#178013); +#178011 = CARTESIAN_POINT('',(0.85,-0.7,0.9)); +#178012 = DIRECTION('',(0.,0.,-1.)); +#178013 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#178014 = ADVANCED_FACE('',(#178015),#178025,.F.); +#178015 = FACE_BOUND('',#178016,.F.); +#178016 = EDGE_LOOP('',(#178017,#178018,#178023,#178024)); +#178017 = ORIENTED_EDGE('',*,*,#176834,.T.); +#178018 = ORIENTED_EDGE('',*,*,#178019,.T.); +#178019 = EDGE_CURVE('',#176827,#177949,#178020,.T.); +#178020 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#178021,#178022), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#178021 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#178022 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#178023 = ORIENTED_EDGE('',*,*,#177956,.F.); +#178024 = ORIENTED_EDGE('',*,*,#176740,.F.); +#178025 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#178026,#178027) + ,(#178028,#178029 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#178026 = CARTESIAN_POINT('',(0.775,-1.3425,0.9)); +#178027 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55)); +#178028 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#178029 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#178030 = ADVANCED_FACE('',(#178031),#178042,.T.); +#178031 = FACE_BOUND('',#178032,.T.); +#178032 = EDGE_LOOP('',(#178033,#178034,#178035,#178036)); +#178033 = ORIENTED_EDGE('',*,*,#177546,.T.); +#178034 = ORIENTED_EDGE('',*,*,#176770,.T.); +#178035 = ORIENTED_EDGE('',*,*,#177648,.F.); +#178036 = ORIENTED_EDGE('',*,*,#178037,.F.); +#178037 = EDGE_CURVE('',#177539,#177641,#178038,.T.); +#178038 = LINE('',#178039,#178040); +#178039 = CARTESIAN_POINT('',(1.096201938253,1.2,0.693412044417)); +#178040 = VECTOR('',#178041,1.); +#178041 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178042 = CYLINDRICAL_SURFACE('',#178043,0.25); +#178043 = AXIS2_PLACEMENT_3D('',#178044,#178045,#178046); +#178044 = CARTESIAN_POINT('',(0.85,1.2,0.65)); +#178045 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178046 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#178047 = ADVANCED_FACE('',(#178048),#178054,.F.); +#178048 = FACE_BOUND('',#178049,.F.); +#178049 = EDGE_LOOP('',(#178050,#178051,#178052,#178053)); +#178050 = ORIENTED_EDGE('',*,*,#176826,.T.); +#178051 = ORIENTED_EDGE('',*,*,#177986,.T.); +#178052 = ORIENTED_EDGE('',*,*,#177948,.F.); +#178053 = ORIENTED_EDGE('',*,*,#178019,.F.); +#178054 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#178055,#178056) + ,(#178057,#178058 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#178055 = CARTESIAN_POINT('',(0.6925,-1.425,0.9)); +#178056 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55)); +#178057 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9)); +#178058 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55)); +#178059 = ADVANCED_FACE('',(#178060),#178071,.T.); +#178060 = FACE_BOUND('',#178061,.T.); +#178061 = EDGE_LOOP('',(#178062,#178063,#178064,#178065)); +#178062 = ORIENTED_EDGE('',*,*,#176918,.T.); +#178063 = ORIENTED_EDGE('',*,*,#177900,.T.); +#178064 = ORIENTED_EDGE('',*,*,#177027,.F.); +#178065 = ORIENTED_EDGE('',*,*,#178066,.F.); +#178066 = EDGE_CURVE('',#176911,#177020,#178067,.T.); +#178067 = LINE('',#178068,#178069); +#178068 = CARTESIAN_POINT('',(-1.096201938253,-1.2,0.693412044417)); +#178069 = VECTOR('',#178070,1.); +#178070 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178071 = CYLINDRICAL_SURFACE('',#178072,0.25); +#178072 = AXIS2_PLACEMENT_3D('',#178073,#178074,#178075); +#178073 = CARTESIAN_POINT('',(-0.85,-1.2,0.65)); +#178074 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178075 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#178076 = ADVANCED_FACE('',(#178077),#178088,.F.); +#178077 = FACE_BOUND('',#178078,.F.); +#178078 = EDGE_LOOP('',(#178079,#178085,#178086,#178087)); +#178079 = ORIENTED_EDGE('',*,*,#178080,.T.); +#178080 = EDGE_CURVE('',#176902,#177011,#178081,.T.); +#178081 = LINE('',#178082,#178083); +#178082 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#178083 = VECTOR('',#178084,1.); +#178084 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178085 = ORIENTED_EDGE('',*,*,#177019,.T.); +#178086 = ORIENTED_EDGE('',*,*,#178066,.F.); +#178087 = ORIENTED_EDGE('',*,*,#176910,.F.); +#178088 = PLANE('',#178089); +#178089 = AXIS2_PLACEMENT_3D('',#178090,#178091,#178092); +#178090 = CARTESIAN_POINT('',(-1.172050016982,-1.2,0.232635182233)); +#178091 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#178092 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#178093 = ADVANCED_FACE('',(#178094),#178105,.F.); +#178094 = FACE_BOUND('',#178095,.F.); +#178095 = EDGE_LOOP('',(#178096,#178102,#178103,#178104)); +#178096 = ORIENTED_EDGE('',*,*,#178097,.T.); +#178097 = EDGE_CURVE('',#176894,#177003,#178098,.T.); +#178098 = LINE('',#178099,#178100); +#178099 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.15)); +#178100 = VECTOR('',#178101,1.); +#178101 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178102 = ORIENTED_EDGE('',*,*,#177010,.T.); +#178103 = ORIENTED_EDGE('',*,*,#178080,.F.); +#178104 = ORIENTED_EDGE('',*,*,#176901,.F.); +#178105 = CYLINDRICAL_SURFACE('',#178106,0.1); +#178106 = AXIS2_PLACEMENT_3D('',#178107,#178108,#178109); +#178107 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#178108 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178109 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#178110 = ADVANCED_FACE('',(#178111),#178122,.F.); +#178111 = FACE_BOUND('',#178112,.F.); +#178112 = EDGE_LOOP('',(#178113,#178119,#178120,#178121)); +#178113 = ORIENTED_EDGE('',*,*,#178114,.T.); +#178114 = EDGE_CURVE('',#176886,#176995,#178115,.T.); +#178115 = LINE('',#178116,#178117); +#178116 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#178117 = VECTOR('',#178118,1.); +#178118 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178119 = ORIENTED_EDGE('',*,*,#177002,.T.); +#178120 = ORIENTED_EDGE('',*,*,#178097,.F.); +#178121 = ORIENTED_EDGE('',*,*,#176893,.F.); +#178122 = PLANE('',#178123); +#178123 = AXIS2_PLACEMENT_3D('',#178124,#178125,#178126); +#178124 = CARTESIAN_POINT('',(-1.4,-1.2,0.15)); +#178125 = DIRECTION('',(0.,0.,-1.)); +#178126 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178127 = ADVANCED_FACE('',(#178128),#178139,.F.); +#178128 = FACE_BOUND('',#178129,.F.); +#178129 = EDGE_LOOP('',(#178130,#178136,#178137,#178138)); +#178130 = ORIENTED_EDGE('',*,*,#178131,.T.); +#178131 = EDGE_CURVE('',#176878,#176987,#178132,.T.); +#178132 = LINE('',#178133,#178134); +#178133 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#178134 = VECTOR('',#178135,1.); +#178135 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178136 = ORIENTED_EDGE('',*,*,#176994,.T.); +#178137 = ORIENTED_EDGE('',*,*,#178114,.F.); +#178138 = ORIENTED_EDGE('',*,*,#176885,.F.); +#178139 = PLANE('',#178140); +#178140 = AXIS2_PLACEMENT_3D('',#178141,#178142,#178143); +#178141 = CARTESIAN_POINT('',(-1.4,-1.2,0.)); +#178142 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178143 = DIRECTION('',(0.,0.,1.)); +#178144 = ADVANCED_FACE('',(#178145),#178156,.F.); +#178145 = FACE_BOUND('',#178146,.F.); +#178146 = EDGE_LOOP('',(#178147,#178153,#178154,#178155)); +#178147 = ORIENTED_EDGE('',*,*,#178148,.T.); +#178148 = EDGE_CURVE('',#176869,#176978,#178149,.T.); +#178149 = LINE('',#178150,#178151); +#178150 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#178151 = VECTOR('',#178152,1.); +#178152 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178153 = ORIENTED_EDGE('',*,*,#176986,.T.); +#178154 = ORIENTED_EDGE('',*,*,#178131,.F.); +#178155 = ORIENTED_EDGE('',*,*,#176877,.F.); +#178156 = PLANE('',#178157); +#178157 = AXIS2_PLACEMENT_3D('',#178158,#178159,#178160); +#178158 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.)); +#178159 = DIRECTION('',(0.,0.,1.)); +#178160 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#178161 = ADVANCED_FACE('',(#178162),#178173,.T.); +#178162 = FACE_BOUND('',#178163,.T.); +#178163 = EDGE_LOOP('',(#178164,#178165,#178166,#178167)); +#178164 = ORIENTED_EDGE('',*,*,#176868,.T.); +#178165 = ORIENTED_EDGE('',*,*,#178148,.T.); +#178166 = ORIENTED_EDGE('',*,*,#176977,.F.); +#178167 = ORIENTED_EDGE('',*,*,#178168,.F.); +#178168 = EDGE_CURVE('',#176861,#176970,#178169,.T.); +#178169 = LINE('',#178170,#178171); +#178170 = CARTESIAN_POINT('',(-1.02432885403,-1.2,0.206587955583)); +#178171 = VECTOR('',#178172,1.); +#178172 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178173 = CYLINDRICAL_SURFACE('',#178174,0.25); +#178174 = AXIS2_PLACEMENT_3D('',#178175,#178176,#178177); +#178175 = CARTESIAN_POINT('',(-1.270530792283,-1.2,0.25)); +#178176 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178177 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#178178 = ADVANCED_FACE('',(#178179),#178185,.F.); +#178179 = FACE_BOUND('',#178180,.F.); +#178180 = EDGE_LOOP('',(#178181,#178182,#178183,#178184)); +#178181 = ORIENTED_EDGE('',*,*,#176951,.T.); +#178182 = ORIENTED_EDGE('',*,*,#176969,.T.); +#178183 = ORIENTED_EDGE('',*,*,#178168,.F.); +#178184 = ORIENTED_EDGE('',*,*,#176860,.F.); +#178185 = PLANE('',#178186); +#178186 = AXIS2_PLACEMENT_3D('',#178187,#178188,#178189); +#178187 = CARTESIAN_POINT('',(-0.948480775301,-1.2,0.667364817767)); +#178188 = DIRECTION('',(-0.986721169868,1.129043606572E-17, + 0.162423314012)); +#178189 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#178190 = ADVANCED_FACE('',(#178191),#178202,.T.); +#178191 = FACE_BOUND('',#178192,.T.); +#178192 = EDGE_LOOP('',(#178193,#178194,#178195,#178196)); +#178193 = ORIENTED_EDGE('',*,*,#177141,.T.); +#178194 = ORIENTED_EDGE('',*,*,#177919,.T.); +#178195 = ORIENTED_EDGE('',*,*,#177250,.F.); +#178196 = ORIENTED_EDGE('',*,*,#178197,.F.); +#178197 = EDGE_CURVE('',#177134,#177243,#178198,.T.); +#178198 = LINE('',#178199,#178200); +#178199 = CARTESIAN_POINT('',(-1.096201938253,-0.25,0.693412044417)); +#178200 = VECTOR('',#178201,1.); +#178201 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178202 = CYLINDRICAL_SURFACE('',#178203,0.25); +#178203 = AXIS2_PLACEMENT_3D('',#178204,#178205,#178206); +#178204 = CARTESIAN_POINT('',(-0.85,-0.25,0.65)); +#178205 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178206 = DIRECTION('',(-0.984807753012,1.126854202784E-17, + 0.173648177667)); +#178207 = ADVANCED_FACE('',(#178208),#178219,.F.); +#178208 = FACE_BOUND('',#178209,.F.); +#178209 = EDGE_LOOP('',(#178210,#178216,#178217,#178218)); +#178210 = ORIENTED_EDGE('',*,*,#178211,.T.); +#178211 = EDGE_CURVE('',#177125,#177234,#178212,.T.); +#178212 = LINE('',#178213,#178214); +#178213 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#178214 = VECTOR('',#178215,1.); +#178215 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178216 = ORIENTED_EDGE('',*,*,#177242,.T.); +#178217 = ORIENTED_EDGE('',*,*,#178197,.F.); +#178218 = ORIENTED_EDGE('',*,*,#177133,.F.); +#178219 = PLANE('',#178220); +#178220 = AXIS2_PLACEMENT_3D('',#178221,#178222,#178223); +#178221 = CARTESIAN_POINT('',(-1.172050016982,-0.25,0.232635182233)); +#178222 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#178223 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#178224 = ADVANCED_FACE('',(#178225),#178236,.F.); +#178225 = FACE_BOUND('',#178226,.F.); +#178226 = EDGE_LOOP('',(#178227,#178233,#178234,#178235)); +#178227 = ORIENTED_EDGE('',*,*,#178228,.T.); +#178228 = EDGE_CURVE('',#177117,#177226,#178229,.T.); +#178229 = LINE('',#178230,#178231); +#178230 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.15)); +#178231 = VECTOR('',#178232,1.); +#178232 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178233 = ORIENTED_EDGE('',*,*,#177233,.T.); +#178234 = ORIENTED_EDGE('',*,*,#178211,.F.); +#178235 = ORIENTED_EDGE('',*,*,#177124,.F.); +#178236 = CYLINDRICAL_SURFACE('',#178237,0.1); +#178237 = AXIS2_PLACEMENT_3D('',#178238,#178239,#178240); +#178238 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#178239 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178240 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#178241 = ADVANCED_FACE('',(#178242),#178253,.F.); +#178242 = FACE_BOUND('',#178243,.F.); +#178243 = EDGE_LOOP('',(#178244,#178250,#178251,#178252)); +#178244 = ORIENTED_EDGE('',*,*,#178245,.T.); +#178245 = EDGE_CURVE('',#177109,#177218,#178246,.T.); +#178246 = LINE('',#178247,#178248); +#178247 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#178248 = VECTOR('',#178249,1.); +#178249 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178250 = ORIENTED_EDGE('',*,*,#177225,.T.); +#178251 = ORIENTED_EDGE('',*,*,#178228,.F.); +#178252 = ORIENTED_EDGE('',*,*,#177116,.F.); +#178253 = PLANE('',#178254); +#178254 = AXIS2_PLACEMENT_3D('',#178255,#178256,#178257); +#178255 = CARTESIAN_POINT('',(-1.4,-0.25,0.15)); +#178256 = DIRECTION('',(0.,0.,-1.)); +#178257 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178258 = ADVANCED_FACE('',(#178259),#178270,.F.); +#178259 = FACE_BOUND('',#178260,.F.); +#178260 = EDGE_LOOP('',(#178261,#178267,#178268,#178269)); +#178261 = ORIENTED_EDGE('',*,*,#178262,.T.); +#178262 = EDGE_CURVE('',#177101,#177210,#178263,.T.); +#178263 = LINE('',#178264,#178265); +#178264 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#178265 = VECTOR('',#178266,1.); +#178266 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178267 = ORIENTED_EDGE('',*,*,#177217,.T.); +#178268 = ORIENTED_EDGE('',*,*,#178245,.F.); +#178269 = ORIENTED_EDGE('',*,*,#177108,.F.); +#178270 = PLANE('',#178271); +#178271 = AXIS2_PLACEMENT_3D('',#178272,#178273,#178274); +#178272 = CARTESIAN_POINT('',(-1.4,-0.25,0.)); +#178273 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178274 = DIRECTION('',(0.,0.,1.)); +#178275 = ADVANCED_FACE('',(#178276),#178287,.F.); +#178276 = FACE_BOUND('',#178277,.F.); +#178277 = EDGE_LOOP('',(#178278,#178284,#178285,#178286)); +#178278 = ORIENTED_EDGE('',*,*,#178279,.T.); +#178279 = EDGE_CURVE('',#177092,#177201,#178280,.T.); +#178280 = LINE('',#178281,#178282); +#178281 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#178282 = VECTOR('',#178283,1.); +#178283 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178284 = ORIENTED_EDGE('',*,*,#177209,.T.); +#178285 = ORIENTED_EDGE('',*,*,#178262,.F.); +#178286 = ORIENTED_EDGE('',*,*,#177100,.F.); +#178287 = PLANE('',#178288); +#178288 = AXIS2_PLACEMENT_3D('',#178289,#178290,#178291); +#178289 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.)); +#178290 = DIRECTION('',(0.,0.,1.)); +#178291 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#178292 = ADVANCED_FACE('',(#178293),#178304,.T.); +#178293 = FACE_BOUND('',#178294,.T.); +#178294 = EDGE_LOOP('',(#178295,#178296,#178297,#178298)); +#178295 = ORIENTED_EDGE('',*,*,#177091,.T.); +#178296 = ORIENTED_EDGE('',*,*,#178279,.T.); +#178297 = ORIENTED_EDGE('',*,*,#177200,.F.); +#178298 = ORIENTED_EDGE('',*,*,#178299,.F.); +#178299 = EDGE_CURVE('',#177084,#177193,#178300,.T.); +#178300 = LINE('',#178301,#178302); +#178301 = CARTESIAN_POINT('',(-1.02432885403,-0.25,0.206587955583)); +#178302 = VECTOR('',#178303,1.); +#178303 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178304 = CYLINDRICAL_SURFACE('',#178305,0.25); +#178305 = AXIS2_PLACEMENT_3D('',#178306,#178307,#178308); +#178306 = CARTESIAN_POINT('',(-1.270530792283,-0.25,0.25)); +#178307 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178308 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#178309 = ADVANCED_FACE('',(#178310),#178316,.F.); +#178310 = FACE_BOUND('',#178311,.F.); +#178311 = EDGE_LOOP('',(#178312,#178313,#178314,#178315)); +#178312 = ORIENTED_EDGE('',*,*,#177174,.T.); +#178313 = ORIENTED_EDGE('',*,*,#177192,.T.); +#178314 = ORIENTED_EDGE('',*,*,#178299,.F.); +#178315 = ORIENTED_EDGE('',*,*,#177083,.F.); +#178316 = PLANE('',#178317); +#178317 = AXIS2_PLACEMENT_3D('',#178318,#178319,#178320); +#178318 = CARTESIAN_POINT('',(-0.948480775301,-0.25,0.667364817767)); +#178319 = DIRECTION('',(-0.986721169868,1.129043606572E-17, + 0.162423314012)); +#178320 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#178321 = ADVANCED_FACE('',(#178322),#178333,.F.); +#178322 = FACE_BOUND('',#178323,.F.); +#178323 = EDGE_LOOP('',(#178324,#178330,#178331,#178332)); +#178324 = ORIENTED_EDGE('',*,*,#178325,.T.); +#178325 = EDGE_CURVE('',#177343,#177445,#178326,.T.); +#178326 = LINE('',#178327,#178328); +#178327 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#178328 = VECTOR('',#178329,1.); +#178329 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178330 = ORIENTED_EDGE('',*,*,#177453,.T.); +#178331 = ORIENTED_EDGE('',*,*,#177885,.F.); +#178332 = ORIENTED_EDGE('',*,*,#177351,.F.); +#178333 = PLANE('',#178334); +#178334 = AXIS2_PLACEMENT_3D('',#178335,#178336,#178337); +#178335 = CARTESIAN_POINT('',(-1.172050016982,0.7,0.232635182233)); +#178336 = DIRECTION('',(0.986721169868,-1.129043606572E-17, + -0.162423314012)); +#178337 = DIRECTION('',(0.162423314012,-1.858508865964E-18, + 0.986721169868)); +#178338 = ADVANCED_FACE('',(#178339),#178350,.F.); +#178339 = FACE_BOUND('',#178340,.F.); +#178340 = EDGE_LOOP('',(#178341,#178347,#178348,#178349)); +#178341 = ORIENTED_EDGE('',*,*,#178342,.T.); +#178342 = EDGE_CURVE('',#177335,#177437,#178343,.T.); +#178343 = LINE('',#178344,#178345); +#178344 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.15)); +#178345 = VECTOR('',#178346,1.); +#178346 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178347 = ORIENTED_EDGE('',*,*,#177444,.T.); +#178348 = ORIENTED_EDGE('',*,*,#178325,.F.); +#178349 = ORIENTED_EDGE('',*,*,#177342,.F.); +#178350 = CYLINDRICAL_SURFACE('',#178351,0.1); +#178351 = AXIS2_PLACEMENT_3D('',#178352,#178353,#178354); +#178352 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#178353 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178354 = DIRECTION('',(-2.22044604925E-15,2.540718180781E-32,-1.)); +#178355 = ADVANCED_FACE('',(#178356),#178367,.F.); +#178356 = FACE_BOUND('',#178357,.F.); +#178357 = EDGE_LOOP('',(#178358,#178364,#178365,#178366)); +#178358 = ORIENTED_EDGE('',*,*,#178359,.T.); +#178359 = EDGE_CURVE('',#177327,#177429,#178360,.T.); +#178360 = LINE('',#178361,#178362); +#178361 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#178362 = VECTOR('',#178363,1.); +#178363 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178364 = ORIENTED_EDGE('',*,*,#177436,.T.); +#178365 = ORIENTED_EDGE('',*,*,#178342,.F.); +#178366 = ORIENTED_EDGE('',*,*,#177334,.F.); +#178367 = PLANE('',#178368); +#178368 = AXIS2_PLACEMENT_3D('',#178369,#178370,#178371); +#178369 = CARTESIAN_POINT('',(-1.4,0.7,0.15)); +#178370 = DIRECTION('',(0.,0.,-1.)); +#178371 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178372 = ADVANCED_FACE('',(#178373),#178384,.F.); +#178373 = FACE_BOUND('',#178374,.F.); +#178374 = EDGE_LOOP('',(#178375,#178381,#178382,#178383)); +#178375 = ORIENTED_EDGE('',*,*,#178376,.T.); +#178376 = EDGE_CURVE('',#177319,#177421,#178377,.T.); +#178377 = LINE('',#178378,#178379); +#178378 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#178379 = VECTOR('',#178380,1.); +#178380 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178381 = ORIENTED_EDGE('',*,*,#177428,.T.); +#178382 = ORIENTED_EDGE('',*,*,#178359,.F.); +#178383 = ORIENTED_EDGE('',*,*,#177326,.F.); +#178384 = PLANE('',#178385); +#178385 = AXIS2_PLACEMENT_3D('',#178386,#178387,#178388); +#178386 = CARTESIAN_POINT('',(-1.4,0.7,0.)); +#178387 = DIRECTION('',(1.,-1.144237745222E-17,0.)); +#178388 = DIRECTION('',(0.,0.,1.)); +#178389 = ADVANCED_FACE('',(#178390),#178401,.F.); +#178390 = FACE_BOUND('',#178391,.F.); +#178391 = EDGE_LOOP('',(#178392,#178398,#178399,#178400)); +#178392 = ORIENTED_EDGE('',*,*,#178393,.T.); +#178393 = EDGE_CURVE('',#177310,#177412,#178394,.T.); +#178394 = LINE('',#178395,#178396); +#178395 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#178396 = VECTOR('',#178397,1.); +#178397 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178398 = ORIENTED_EDGE('',*,*,#177420,.T.); +#178399 = ORIENTED_EDGE('',*,*,#178376,.F.); +#178400 = ORIENTED_EDGE('',*,*,#177318,.F.); +#178401 = PLANE('',#178402); +#178402 = AXIS2_PLACEMENT_3D('',#178403,#178404,#178405); +#178403 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.)); +#178404 = DIRECTION('',(0.,0.,1.)); +#178405 = DIRECTION('',(-1.,1.144237745222E-17,0.)); +#178406 = ADVANCED_FACE('',(#178407),#178418,.T.); +#178407 = FACE_BOUND('',#178408,.T.); +#178408 = EDGE_LOOP('',(#178409,#178410,#178411,#178412)); +#178409 = ORIENTED_EDGE('',*,*,#177309,.T.); +#178410 = ORIENTED_EDGE('',*,*,#178393,.T.); +#178411 = ORIENTED_EDGE('',*,*,#177411,.F.); +#178412 = ORIENTED_EDGE('',*,*,#178413,.F.); +#178413 = EDGE_CURVE('',#177302,#177404,#178414,.T.); +#178414 = LINE('',#178415,#178416); +#178415 = CARTESIAN_POINT('',(-1.02432885403,0.7,0.206587955583)); +#178416 = VECTOR('',#178417,1.); +#178417 = DIRECTION('',(1.144237745222E-17,1.,0.)); +#178418 = CYLINDRICAL_SURFACE('',#178419,0.25); +#178419 = AXIS2_PLACEMENT_3D('',#178420,#178421,#178422); +#178420 = CARTESIAN_POINT('',(-1.270530792283,0.7,0.25)); +#178421 = DIRECTION('',(-1.144237745222E-17,-1.,0.)); +#178422 = DIRECTION('',(0.984807753012,-1.126854202784E-17, + -0.173648177667)); +#178423 = ADVANCED_FACE('',(#178424),#178430,.F.); +#178424 = FACE_BOUND('',#178425,.F.); +#178425 = EDGE_LOOP('',(#178426,#178427,#178428,#178429)); +#178426 = ORIENTED_EDGE('',*,*,#177385,.T.); +#178427 = ORIENTED_EDGE('',*,*,#177403,.T.); +#178428 = ORIENTED_EDGE('',*,*,#178413,.F.); +#178429 = ORIENTED_EDGE('',*,*,#177301,.F.); +#178430 = PLANE('',#178431); +#178431 = AXIS2_PLACEMENT_3D('',#178432,#178433,#178434); +#178432 = CARTESIAN_POINT('',(-0.948480775301,0.7,0.667364817767)); +#178433 = DIRECTION('',(-0.986721169868,1.129043606572E-17, + 0.162423314012)); +#178434 = DIRECTION('',(-0.162423314012,1.858508865964E-18, + -0.986721169868)); +#178435 = ADVANCED_FACE('',(#178436),#178447,.F.); +#178436 = FACE_BOUND('',#178437,.F.); +#178437 = EDGE_LOOP('',(#178438,#178444,#178445,#178446)); +#178438 = ORIENTED_EDGE('',*,*,#178439,.T.); +#178439 = EDGE_CURVE('',#177530,#177632,#178440,.T.); +#178440 = LINE('',#178441,#178442); +#178441 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#178442 = VECTOR('',#178443,1.); +#178443 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178444 = ORIENTED_EDGE('',*,*,#177640,.T.); +#178445 = ORIENTED_EDGE('',*,*,#178037,.F.); +#178446 = ORIENTED_EDGE('',*,*,#177538,.F.); +#178447 = PLANE('',#178448); +#178448 = AXIS2_PLACEMENT_3D('',#178449,#178450,#178451); +#178449 = CARTESIAN_POINT('',(1.172050016982,1.2,0.232635182233)); +#178450 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#178451 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#178452 = ADVANCED_FACE('',(#178453),#178464,.F.); +#178453 = FACE_BOUND('',#178454,.F.); +#178454 = EDGE_LOOP('',(#178455,#178461,#178462,#178463)); +#178455 = ORIENTED_EDGE('',*,*,#178456,.T.); +#178456 = EDGE_CURVE('',#177522,#177624,#178457,.T.); +#178457 = LINE('',#178458,#178459); +#178458 = CARTESIAN_POINT('',(1.270530792283,1.2,0.15)); +#178459 = VECTOR('',#178460,1.); +#178460 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178461 = ORIENTED_EDGE('',*,*,#177631,.T.); +#178462 = ORIENTED_EDGE('',*,*,#178439,.F.); +#178463 = ORIENTED_EDGE('',*,*,#177529,.F.); +#178464 = CYLINDRICAL_SURFACE('',#178465,0.1); +#178465 = AXIS2_PLACEMENT_3D('',#178466,#178467,#178468); +#178466 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#178467 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178468 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#178469 = ADVANCED_FACE('',(#178470),#178481,.F.); +#178470 = FACE_BOUND('',#178471,.F.); +#178471 = EDGE_LOOP('',(#178472,#178478,#178479,#178480)); +#178472 = ORIENTED_EDGE('',*,*,#178473,.T.); +#178473 = EDGE_CURVE('',#177514,#177616,#178474,.T.); +#178474 = LINE('',#178475,#178476); +#178475 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#178476 = VECTOR('',#178477,1.); +#178477 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178478 = ORIENTED_EDGE('',*,*,#177623,.T.); +#178479 = ORIENTED_EDGE('',*,*,#178456,.F.); +#178480 = ORIENTED_EDGE('',*,*,#177521,.F.); +#178481 = PLANE('',#178482); +#178482 = AXIS2_PLACEMENT_3D('',#178483,#178484,#178485); +#178483 = CARTESIAN_POINT('',(1.4,1.2,0.15)); +#178484 = DIRECTION('',(0.,0.,-1.)); +#178485 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#178486 = ADVANCED_FACE('',(#178487),#178498,.F.); +#178487 = FACE_BOUND('',#178488,.F.); +#178488 = EDGE_LOOP('',(#178489,#178495,#178496,#178497)); +#178489 = ORIENTED_EDGE('',*,*,#178490,.T.); +#178490 = EDGE_CURVE('',#177506,#177608,#178491,.T.); +#178491 = LINE('',#178492,#178493); +#178492 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#178493 = VECTOR('',#178494,1.); +#178494 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178495 = ORIENTED_EDGE('',*,*,#177615,.T.); +#178496 = ORIENTED_EDGE('',*,*,#178473,.F.); +#178497 = ORIENTED_EDGE('',*,*,#177513,.F.); +#178498 = PLANE('',#178499); +#178499 = AXIS2_PLACEMENT_3D('',#178500,#178501,#178502); +#178500 = CARTESIAN_POINT('',(1.4,1.2,0.)); +#178501 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#178502 = DIRECTION('',(0.,0.,1.)); +#178503 = ADVANCED_FACE('',(#178504),#178515,.F.); +#178504 = FACE_BOUND('',#178505,.F.); +#178505 = EDGE_LOOP('',(#178506,#178512,#178513,#178514)); +#178506 = ORIENTED_EDGE('',*,*,#178507,.T.); +#178507 = EDGE_CURVE('',#177497,#177599,#178508,.T.); +#178508 = LINE('',#178509,#178510); +#178509 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#178510 = VECTOR('',#178511,1.); +#178511 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178512 = ORIENTED_EDGE('',*,*,#177607,.T.); +#178513 = ORIENTED_EDGE('',*,*,#178490,.F.); +#178514 = ORIENTED_EDGE('',*,*,#177505,.F.); +#178515 = PLANE('',#178516); +#178516 = AXIS2_PLACEMENT_3D('',#178517,#178518,#178519); +#178517 = CARTESIAN_POINT('',(1.270530792283,1.2,0.)); +#178518 = DIRECTION('',(0.,0.,1.)); +#178519 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#178520 = ADVANCED_FACE('',(#178521),#178532,.T.); +#178521 = FACE_BOUND('',#178522,.T.); +#178522 = EDGE_LOOP('',(#178523,#178524,#178525,#178526)); +#178523 = ORIENTED_EDGE('',*,*,#177496,.T.); +#178524 = ORIENTED_EDGE('',*,*,#178507,.T.); +#178525 = ORIENTED_EDGE('',*,*,#177598,.F.); +#178526 = ORIENTED_EDGE('',*,*,#178527,.F.); +#178527 = EDGE_CURVE('',#177489,#177591,#178528,.T.); +#178528 = LINE('',#178529,#178530); +#178529 = CARTESIAN_POINT('',(1.02432885403,1.2,0.206587955583)); +#178530 = VECTOR('',#178531,1.); +#178531 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178532 = CYLINDRICAL_SURFACE('',#178533,0.25); +#178533 = AXIS2_PLACEMENT_3D('',#178534,#178535,#178536); +#178534 = CARTESIAN_POINT('',(1.270530792283,1.2,0.25)); +#178535 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178536 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#178537 = ADVANCED_FACE('',(#178538),#178544,.F.); +#178538 = FACE_BOUND('',#178539,.F.); +#178539 = EDGE_LOOP('',(#178540,#178541,#178542,#178543)); +#178540 = ORIENTED_EDGE('',*,*,#177572,.T.); +#178541 = ORIENTED_EDGE('',*,*,#177590,.T.); +#178542 = ORIENTED_EDGE('',*,*,#178527,.F.); +#178543 = ORIENTED_EDGE('',*,*,#177488,.F.); +#178544 = PLANE('',#178545); +#178545 = AXIS2_PLACEMENT_3D('',#178546,#178547,#178548); +#178546 = CARTESIAN_POINT('',(0.948480775301,1.2,0.667364817767)); +#178547 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012 + )); +#178548 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#178549 = ADVANCED_FACE('',(#178550),#178561,.T.); +#178550 = FACE_BOUND('',#178551,.T.); +#178551 = EDGE_LOOP('',(#178552,#178553,#178554,#178555)); +#178552 = ORIENTED_EDGE('',*,*,#177750,.T.); +#178553 = ORIENTED_EDGE('',*,*,#178000,.T.); +#178554 = ORIENTED_EDGE('',*,*,#177859,.F.); +#178555 = ORIENTED_EDGE('',*,*,#178556,.F.); +#178556 = EDGE_CURVE('',#177743,#177852,#178557,.T.); +#178557 = LINE('',#178558,#178559); +#178558 = CARTESIAN_POINT('',(1.096201938253,-0.7,0.693412044417)); +#178559 = VECTOR('',#178560,1.); +#178560 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178561 = CYLINDRICAL_SURFACE('',#178562,0.25); +#178562 = AXIS2_PLACEMENT_3D('',#178563,#178564,#178565); +#178563 = CARTESIAN_POINT('',(0.85,-0.7,0.65)); +#178564 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178565 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667 + )); +#178566 = ADVANCED_FACE('',(#178567),#178578,.F.); +#178567 = FACE_BOUND('',#178568,.F.); +#178568 = EDGE_LOOP('',(#178569,#178575,#178576,#178577)); +#178569 = ORIENTED_EDGE('',*,*,#178570,.T.); +#178570 = EDGE_CURVE('',#177734,#177843,#178571,.T.); +#178571 = LINE('',#178572,#178573); +#178572 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#178573 = VECTOR('',#178574,1.); +#178574 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178575 = ORIENTED_EDGE('',*,*,#177851,.T.); +#178576 = ORIENTED_EDGE('',*,*,#178556,.F.); +#178577 = ORIENTED_EDGE('',*,*,#177742,.F.); +#178578 = PLANE('',#178579); +#178579 = AXIS2_PLACEMENT_3D('',#178580,#178581,#178582); +#178580 = CARTESIAN_POINT('',(1.172050016982,-0.7,0.232635182233)); +#178581 = DIRECTION('',(-0.986721169868,-1.095480561672E-16, + -0.162423314012)); +#178582 = DIRECTION('',(-0.162423314012,-1.803261029519E-17, + 0.986721169868)); +#178583 = ADVANCED_FACE('',(#178584),#178595,.F.); +#178584 = FACE_BOUND('',#178585,.F.); +#178585 = EDGE_LOOP('',(#178586,#178592,#178593,#178594)); +#178586 = ORIENTED_EDGE('',*,*,#178587,.T.); +#178587 = EDGE_CURVE('',#177726,#177835,#178588,.T.); +#178588 = LINE('',#178589,#178590); +#178589 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.15)); +#178590 = VECTOR('',#178591,1.); +#178591 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178592 = ORIENTED_EDGE('',*,*,#177842,.T.); +#178593 = ORIENTED_EDGE('',*,*,#178570,.F.); +#178594 = ORIENTED_EDGE('',*,*,#177733,.F.); +#178595 = CYLINDRICAL_SURFACE('',#178596,0.1); +#178596 = AXIS2_PLACEMENT_3D('',#178597,#178598,#178599); +#178597 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#178598 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178599 = DIRECTION('',(2.22044604925E-15,2.465190328815E-31,-1.)); +#178600 = ADVANCED_FACE('',(#178601),#178612,.F.); +#178601 = FACE_BOUND('',#178602,.F.); +#178602 = EDGE_LOOP('',(#178603,#178609,#178610,#178611)); +#178603 = ORIENTED_EDGE('',*,*,#178604,.T.); +#178604 = EDGE_CURVE('',#177718,#177827,#178605,.T.); +#178605 = LINE('',#178606,#178607); +#178606 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#178607 = VECTOR('',#178608,1.); +#178608 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178609 = ORIENTED_EDGE('',*,*,#177834,.T.); +#178610 = ORIENTED_EDGE('',*,*,#178587,.F.); +#178611 = ORIENTED_EDGE('',*,*,#177725,.F.); +#178612 = PLANE('',#178613); +#178613 = AXIS2_PLACEMENT_3D('',#178614,#178615,#178616); +#178614 = CARTESIAN_POINT('',(1.4,-0.7,0.15)); +#178615 = DIRECTION('',(0.,0.,-1.)); +#178616 = DIRECTION('',(-1.,-1.110223024625E-16,-0.)); +#178617 = ADVANCED_FACE('',(#178618),#178629,.F.); +#178618 = FACE_BOUND('',#178619,.F.); +#178619 = EDGE_LOOP('',(#178620,#178626,#178627,#178628)); +#178620 = ORIENTED_EDGE('',*,*,#178621,.T.); +#178621 = EDGE_CURVE('',#177710,#177819,#178622,.T.); +#178622 = LINE('',#178623,#178624); +#178623 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#178624 = VECTOR('',#178625,1.); +#178625 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178626 = ORIENTED_EDGE('',*,*,#177826,.T.); +#178627 = ORIENTED_EDGE('',*,*,#178604,.F.); +#178628 = ORIENTED_EDGE('',*,*,#177717,.F.); +#178629 = PLANE('',#178630); +#178630 = AXIS2_PLACEMENT_3D('',#178631,#178632,#178633); +#178631 = CARTESIAN_POINT('',(1.4,-0.7,0.)); +#178632 = DIRECTION('',(-1.,-1.110223024625E-16,0.)); +#178633 = DIRECTION('',(0.,0.,1.)); +#178634 = ADVANCED_FACE('',(#178635),#178646,.F.); +#178635 = FACE_BOUND('',#178636,.F.); +#178636 = EDGE_LOOP('',(#178637,#178643,#178644,#178645)); +#178637 = ORIENTED_EDGE('',*,*,#178638,.T.); +#178638 = EDGE_CURVE('',#177701,#177810,#178639,.T.); +#178639 = LINE('',#178640,#178641); +#178640 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#178641 = VECTOR('',#178642,1.); +#178642 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178643 = ORIENTED_EDGE('',*,*,#177818,.T.); +#178644 = ORIENTED_EDGE('',*,*,#178621,.F.); +#178645 = ORIENTED_EDGE('',*,*,#177709,.F.); +#178646 = PLANE('',#178647); +#178647 = AXIS2_PLACEMENT_3D('',#178648,#178649,#178650); +#178648 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.)); +#178649 = DIRECTION('',(0.,0.,1.)); +#178650 = DIRECTION('',(1.,1.110223024625E-16,-0.)); +#178651 = ADVANCED_FACE('',(#178652),#178663,.T.); +#178652 = FACE_BOUND('',#178653,.T.); +#178653 = EDGE_LOOP('',(#178654,#178655,#178656,#178657)); +#178654 = ORIENTED_EDGE('',*,*,#177700,.T.); +#178655 = ORIENTED_EDGE('',*,*,#178638,.T.); +#178656 = ORIENTED_EDGE('',*,*,#177809,.F.); +#178657 = ORIENTED_EDGE('',*,*,#178658,.F.); +#178658 = EDGE_CURVE('',#177693,#177802,#178659,.T.); +#178659 = LINE('',#178660,#178661); +#178660 = CARTESIAN_POINT('',(1.02432885403,-0.7,0.206587955583)); +#178661 = VECTOR('',#178662,1.); +#178662 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178663 = CYLINDRICAL_SURFACE('',#178664,0.25); +#178664 = AXIS2_PLACEMENT_3D('',#178665,#178666,#178667); +#178665 = CARTESIAN_POINT('',(1.270530792283,-0.7,0.25)); +#178666 = DIRECTION('',(-1.110223024625E-16,1.,0.)); +#178667 = DIRECTION('',(-0.984807753012,-1.093356242223E-16, + -0.173648177667)); +#178668 = ADVANCED_FACE('',(#178669),#178675,.F.); +#178669 = FACE_BOUND('',#178670,.F.); +#178670 = EDGE_LOOP('',(#178671,#178672,#178673,#178674)); +#178671 = ORIENTED_EDGE('',*,*,#177783,.T.); +#178672 = ORIENTED_EDGE('',*,*,#177801,.T.); +#178673 = ORIENTED_EDGE('',*,*,#178658,.F.); +#178674 = ORIENTED_EDGE('',*,*,#177692,.F.); +#178675 = PLANE('',#178676); +#178676 = AXIS2_PLACEMENT_3D('',#178677,#178678,#178679); +#178677 = CARTESIAN_POINT('',(0.948480775301,-0.7,0.667364817767)); +#178678 = DIRECTION('',(0.986721169868,1.095480561672E-16,0.162423314012 + )); +#178679 = DIRECTION('',(0.162423314012,1.803261029519E-17, + -0.986721169868)); +#178680 = ADVANCED_FACE('',(#178681),#178684,.F.); +#178681 = FACE_BOUND('',#178682,.T.); +#178682 = EDGE_LOOP('',(#178683)); +#178683 = ORIENTED_EDGE('',*,*,#177966,.F.); +#178684 = PLANE('',#178685); +#178685 = AXIS2_PLACEMENT_3D('',#178686,#178687,#178688); +#178686 = CARTESIAN_POINT('',(-0.483648457443,1.133648457443,1.55)); +#178687 = DIRECTION('',(0.,0.,-1.)); +#178688 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#178689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#178693)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#178690,#178691,#178692)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#178690 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#178691 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#178692 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#178693 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#178690, + 'distance_accuracy_value','confusion accuracy'); +#178694 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#178695,#178697); +#178695 = ( REPRESENTATION_RELATIONSHIP('','',#175619,#175596) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#178696) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#178696 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175597); +#178697 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #178698); +#178698 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('104','=>[0:1:1:48]','',#175591 + ,#175614,$); +#178699 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#175616)); +#178700 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#178701,#178703); +#178701 = ( REPRESENTATION_RELATIONSHIP('','',#32442,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#178702) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#178702 = ITEM_DEFINED_TRANSFORMATION('','',#11,#335); +#178703 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #178704); +#178704 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('106','C_IMU_1','',#5,#32437,$ + ); +#178705 = SHAPE_DEFINITION_REPRESENTATION(#178706,#178712); +#178706 = PRODUCT_DEFINITION_SHAPE('','',#178707); +#178707 = PRODUCT_DEFINITION('design','',#178708,#178711); +#178708 = PRODUCT_DEFINITION_FORMATION('','',#178709); +#178709 = PRODUCT('L_Bourns-SRN4018','L_Bourns-SRN4018','',(#178710)); +#178710 = PRODUCT_CONTEXT('',#2,'mechanical'); +#178711 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#178712 = SHAPE_REPRESENTATION('',(#11,#178713),#178717); +#178713 = AXIS2_PLACEMENT_3D('',#178714,#178715,#178716); +#178714 = CARTESIAN_POINT('',(0.,0.,0.)); +#178715 = DIRECTION('',(0.,0.,1.)); +#178716 = DIRECTION('',(1.,0.,-0.)); +#178717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#178721)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#178718,#178719,#178720)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#178718 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#178719 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#178720 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#178721 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#178718, + 'distance_accuracy_value','confusion accuracy'); +#178722 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#178723,#178725); +#178723 = ( REPRESENTATION_RELATIONSHIP('','',#178712,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#178724) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#178724 = ITEM_DEFINED_TRANSFORMATION('','',#11,#339); +#178725 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #178726); +#178726 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('108','L_BUCK1','',#5,#178707,$ + ); +#178727 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#178709)); +#178728 = SHAPE_DEFINITION_REPRESENTATION(#178729,#178735); +#178729 = PRODUCT_DEFINITION_SHAPE('','',#178730); +#178730 = PRODUCT_DEFINITION('design','',#178731,#178734); +#178731 = PRODUCT_DEFINITION_FORMATION('','',#178732); +#178732 = PRODUCT('L_Bourns-SRN4018','L_Bourns-SRN4018','',(#178733)); +#178733 = PRODUCT_CONTEXT('',#2,'mechanical'); +#178734 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#178735 = SHAPE_REPRESENTATION('',(#11,#178736,#179245,#179754,#182434, + #182696),#182958); +#178736 = MANIFOLD_SOLID_BREP('',#178737); +#178737 = CLOSED_SHELL('',(#178738,#178778,#178811,#178844,#178877, + #178910,#178936,#178962,#178993,#179034,#179052,#179093,#179111, + #179142,#179160,#179178,#179203,#179221,#179233)); +#178738 = ADVANCED_FACE('',(#178739),#178773,.T.); +#178739 = FACE_BOUND('',#178740,.T.); +#178740 = EDGE_LOOP('',(#178741,#178751,#178759,#178767)); +#178741 = ORIENTED_EDGE('',*,*,#178742,.T.); +#178742 = EDGE_CURVE('',#178743,#178745,#178747,.T.); +#178743 = VERTEX_POINT('',#178744); +#178744 = CARTESIAN_POINT('',(-2.,-1.75,0.1)); +#178745 = VERTEX_POINT('',#178746); +#178746 = CARTESIAN_POINT('',(-2.,-1.75,0.25)); +#178747 = LINE('',#178748,#178749); +#178748 = CARTESIAN_POINT('',(-2.,-1.75,0.)); +#178749 = VECTOR('',#178750,1.); +#178750 = DIRECTION('',(0.,0.,1.)); +#178751 = ORIENTED_EDGE('',*,*,#178752,.T.); +#178752 = EDGE_CURVE('',#178745,#178753,#178755,.T.); +#178753 = VERTEX_POINT('',#178754); +#178754 = CARTESIAN_POINT('',(-2.,1.75,0.25)); +#178755 = LINE('',#178756,#178757); +#178756 = CARTESIAN_POINT('',(-2.,-1.75,0.25)); +#178757 = VECTOR('',#178758,1.); +#178758 = DIRECTION('',(0.,1.,0.)); +#178759 = ORIENTED_EDGE('',*,*,#178760,.F.); +#178760 = EDGE_CURVE('',#178761,#178753,#178763,.T.); +#178761 = VERTEX_POINT('',#178762); +#178762 = CARTESIAN_POINT('',(-2.,1.75,0.1)); +#178763 = LINE('',#178764,#178765); +#178764 = CARTESIAN_POINT('',(-2.,1.75,0.)); +#178765 = VECTOR('',#178766,1.); +#178766 = DIRECTION('',(0.,0.,1.)); +#178767 = ORIENTED_EDGE('',*,*,#178768,.F.); +#178768 = EDGE_CURVE('',#178743,#178761,#178769,.T.); +#178769 = LINE('',#178770,#178771); +#178770 = CARTESIAN_POINT('',(-2.,-1.75,0.1)); +#178771 = VECTOR('',#178772,1.); +#178772 = DIRECTION('',(0.,1.,0.)); +#178773 = PLANE('',#178774); +#178774 = AXIS2_PLACEMENT_3D('',#178775,#178776,#178777); +#178775 = CARTESIAN_POINT('',(-2.,-1.75,0.)); +#178776 = DIRECTION('',(-1.,0.,0.)); +#178777 = DIRECTION('',(0.,1.,0.)); +#178778 = ADVANCED_FACE('',(#178779),#178806,.T.); +#178779 = FACE_BOUND('',#178780,.T.); +#178780 = EDGE_LOOP('',(#178781,#178790,#178798,#178805)); +#178781 = ORIENTED_EDGE('',*,*,#178782,.F.); +#178782 = EDGE_CURVE('',#178783,#178743,#178785,.T.); +#178783 = VERTEX_POINT('',#178784); +#178784 = CARTESIAN_POINT('',(-1.75,-2.,0.1)); +#178785 = CIRCLE('',#178786,0.25); +#178786 = AXIS2_PLACEMENT_3D('',#178787,#178788,#178789); +#178787 = CARTESIAN_POINT('',(-1.75,-1.75,0.1)); +#178788 = DIRECTION('',(0.,0.,-1.)); +#178789 = DIRECTION('',(0.,-1.,0.)); +#178790 = ORIENTED_EDGE('',*,*,#178791,.T.); +#178791 = EDGE_CURVE('',#178783,#178792,#178794,.T.); +#178792 = VERTEX_POINT('',#178793); +#178793 = CARTESIAN_POINT('',(-1.75,-2.,0.25)); +#178794 = LINE('',#178795,#178796); +#178795 = CARTESIAN_POINT('',(-1.75,-2.,0.)); +#178796 = VECTOR('',#178797,1.); +#178797 = DIRECTION('',(0.,0.,1.)); +#178798 = ORIENTED_EDGE('',*,*,#178799,.T.); +#178799 = EDGE_CURVE('',#178792,#178745,#178800,.T.); +#178800 = CIRCLE('',#178801,0.25); +#178801 = AXIS2_PLACEMENT_3D('',#178802,#178803,#178804); +#178802 = CARTESIAN_POINT('',(-1.75,-1.75,0.25)); +#178803 = DIRECTION('',(0.,0.,-1.)); +#178804 = DIRECTION('',(0.,-1.,0.)); +#178805 = ORIENTED_EDGE('',*,*,#178742,.F.); +#178806 = CYLINDRICAL_SURFACE('',#178807,0.25); +#178807 = AXIS2_PLACEMENT_3D('',#178808,#178809,#178810); +#178808 = CARTESIAN_POINT('',(-1.75,-1.75,0.)); +#178809 = DIRECTION('',(-0.,-0.,-1.)); +#178810 = DIRECTION('',(1.,0.,0.)); +#178811 = ADVANCED_FACE('',(#178812),#178839,.T.); +#178812 = FACE_BOUND('',#178813,.T.); +#178813 = EDGE_LOOP('',(#178814,#178815,#178824,#178832)); +#178814 = ORIENTED_EDGE('',*,*,#178768,.T.); +#178815 = ORIENTED_EDGE('',*,*,#178816,.T.); +#178816 = EDGE_CURVE('',#178761,#178817,#178819,.T.); +#178817 = VERTEX_POINT('',#178818); +#178818 = CARTESIAN_POINT('',(-1.9,1.75,-1.387778780781E-17)); +#178819 = CIRCLE('',#178820,0.1); +#178820 = AXIS2_PLACEMENT_3D('',#178821,#178822,#178823); +#178821 = CARTESIAN_POINT('',(-1.9,1.75,0.1)); +#178822 = DIRECTION('',(-0.,-1.,-0.)); +#178823 = DIRECTION('',(-1.,0.,0.)); +#178824 = ORIENTED_EDGE('',*,*,#178825,.F.); +#178825 = EDGE_CURVE('',#178826,#178817,#178828,.T.); +#178826 = VERTEX_POINT('',#178827); +#178827 = CARTESIAN_POINT('',(-1.9,-1.75,0.)); +#178828 = LINE('',#178829,#178830); +#178829 = CARTESIAN_POINT('',(-1.9,-1.75,-1.387778780781E-17)); +#178830 = VECTOR('',#178831,1.); +#178831 = DIRECTION('',(0.,1.,0.)); +#178832 = ORIENTED_EDGE('',*,*,#178833,.F.); +#178833 = EDGE_CURVE('',#178743,#178826,#178834,.T.); +#178834 = CIRCLE('',#178835,0.1); +#178835 = AXIS2_PLACEMENT_3D('',#178836,#178837,#178838); +#178836 = CARTESIAN_POINT('',(-1.9,-1.75,0.1)); +#178837 = DIRECTION('',(6.123233995737E-17,-1.,0.)); +#178838 = DIRECTION('',(-1.,-6.123233995737E-17,0.)); +#178839 = CYLINDRICAL_SURFACE('',#178840,0.1); +#178840 = AXIS2_PLACEMENT_3D('',#178841,#178842,#178843); +#178841 = CARTESIAN_POINT('',(-1.9,-1.75,0.1)); +#178842 = DIRECTION('',(0.,1.,0.)); +#178843 = DIRECTION('',(-1.,0.,0.)); +#178844 = ADVANCED_FACE('',(#178845),#178872,.T.); +#178845 = FACE_BOUND('',#178846,.T.); +#178846 = EDGE_LOOP('',(#178847,#178856,#178864,#178871)); +#178847 = ORIENTED_EDGE('',*,*,#178848,.T.); +#178848 = EDGE_CURVE('',#178745,#178849,#178851,.T.); +#178849 = VERTEX_POINT('',#178850); +#178850 = CARTESIAN_POINT('',(-1.9,-1.75,0.35)); +#178851 = CIRCLE('',#178852,0.1); +#178852 = AXIS2_PLACEMENT_3D('',#178853,#178854,#178855); +#178853 = CARTESIAN_POINT('',(-1.9,-1.75,0.25)); +#178854 = DIRECTION('',(-6.123233995737E-17,1.,0.)); +#178855 = DIRECTION('',(-1.,-6.123233995737E-17,0.)); +#178856 = ORIENTED_EDGE('',*,*,#178857,.T.); +#178857 = EDGE_CURVE('',#178849,#178858,#178860,.T.); +#178858 = VERTEX_POINT('',#178859); +#178859 = CARTESIAN_POINT('',(-1.9,1.75,0.35)); +#178860 = LINE('',#178861,#178862); +#178861 = CARTESIAN_POINT('',(-1.9,-1.75,0.35)); +#178862 = VECTOR('',#178863,1.); +#178863 = DIRECTION('',(0.,1.,0.)); +#178864 = ORIENTED_EDGE('',*,*,#178865,.F.); +#178865 = EDGE_CURVE('',#178753,#178858,#178866,.T.); +#178866 = CIRCLE('',#178867,0.1); +#178867 = AXIS2_PLACEMENT_3D('',#178868,#178869,#178870); +#178868 = CARTESIAN_POINT('',(-1.9,1.75,0.25)); +#178869 = DIRECTION('',(0.,1.,-0.)); +#178870 = DIRECTION('',(-1.,0.,0.)); +#178871 = ORIENTED_EDGE('',*,*,#178752,.F.); +#178872 = CYLINDRICAL_SURFACE('',#178873,0.1); +#178873 = AXIS2_PLACEMENT_3D('',#178874,#178875,#178876); +#178874 = CARTESIAN_POINT('',(-1.9,-1.75,0.25)); +#178875 = DIRECTION('',(0.,1.,0.)); +#178876 = DIRECTION('',(-1.,0.,0.)); +#178877 = ADVANCED_FACE('',(#178878),#178905,.T.); +#178878 = FACE_BOUND('',#178879,.T.); +#178879 = EDGE_LOOP('',(#178880,#178889,#178890,#178899)); +#178880 = ORIENTED_EDGE('',*,*,#178881,.F.); +#178881 = EDGE_CURVE('',#178761,#178882,#178884,.T.); +#178882 = VERTEX_POINT('',#178883); +#178883 = CARTESIAN_POINT('',(-1.75,2.,0.1)); +#178884 = CIRCLE('',#178885,0.25); +#178885 = AXIS2_PLACEMENT_3D('',#178886,#178887,#178888); +#178886 = CARTESIAN_POINT('',(-1.75,1.75,0.1)); +#178887 = DIRECTION('',(0.,0.,-1.)); +#178888 = DIRECTION('',(-1.,0.,0.)); +#178889 = ORIENTED_EDGE('',*,*,#178760,.T.); +#178890 = ORIENTED_EDGE('',*,*,#178891,.T.); +#178891 = EDGE_CURVE('',#178753,#178892,#178894,.T.); +#178892 = VERTEX_POINT('',#178893); +#178893 = CARTESIAN_POINT('',(-1.75,2.,0.25)); +#178894 = CIRCLE('',#178895,0.25); +#178895 = AXIS2_PLACEMENT_3D('',#178896,#178897,#178898); +#178896 = CARTESIAN_POINT('',(-1.75,1.75,0.25)); +#178897 = DIRECTION('',(0.,0.,-1.)); +#178898 = DIRECTION('',(-1.,0.,0.)); +#178899 = ORIENTED_EDGE('',*,*,#178900,.F.); +#178900 = EDGE_CURVE('',#178882,#178892,#178901,.T.); +#178901 = LINE('',#178902,#178903); +#178902 = CARTESIAN_POINT('',(-1.75,2.,0.)); +#178903 = VECTOR('',#178904,1.); +#178904 = DIRECTION('',(0.,0.,1.)); +#178905 = CYLINDRICAL_SURFACE('',#178906,0.25); +#178906 = AXIS2_PLACEMENT_3D('',#178907,#178908,#178909); +#178907 = CARTESIAN_POINT('',(-1.75,1.75,0.)); +#178908 = DIRECTION('',(-0.,-0.,-1.)); +#178909 = DIRECTION('',(1.,0.,0.)); +#178910 = ADVANCED_FACE('',(#178911),#178931,.T.); +#178911 = FACE_BOUND('',#178912,.T.); +#178912 = EDGE_LOOP('',(#178913,#178922,#178923,#178924)); +#178913 = ORIENTED_EDGE('',*,*,#178914,.F.); +#178914 = EDGE_CURVE('',#178783,#178915,#178917,.T.); +#178915 = VERTEX_POINT('',#178916); +#178916 = CARTESIAN_POINT('',(-1.75,-1.9,-1.387778780781E-17)); +#178917 = CIRCLE('',#178918,0.1); +#178918 = AXIS2_PLACEMENT_3D('',#178919,#178920,#178921); +#178919 = CARTESIAN_POINT('',(-1.75,-1.9,0.1)); +#178920 = DIRECTION('',(1.,0.,0.)); +#178921 = DIRECTION('',(0.,-1.,0.)); +#178922 = ORIENTED_EDGE('',*,*,#178782,.T.); +#178923 = ORIENTED_EDGE('',*,*,#178833,.T.); +#178924 = ORIENTED_EDGE('',*,*,#178925,.F.); +#178925 = EDGE_CURVE('',#178915,#178826,#178926,.T.); +#178926 = CIRCLE('',#178927,0.15); +#178927 = AXIS2_PLACEMENT_3D('',#178928,#178929,#178930); +#178928 = CARTESIAN_POINT('',(-1.75,-1.75,0.)); +#178929 = DIRECTION('',(0.,0.,-1.)); +#178930 = DIRECTION('',(0.,-1.,0.)); +#178931 = TOROIDAL_SURFACE('',#178932,0.15,0.1); +#178932 = AXIS2_PLACEMENT_3D('',#178933,#178934,#178935); +#178933 = CARTESIAN_POINT('',(-1.75,-1.75,0.1)); +#178934 = DIRECTION('',(0.,0.,-1.)); +#178935 = DIRECTION('',(0.,-1.,0.)); +#178936 = ADVANCED_FACE('',(#178937),#178957,.T.); +#178937 = FACE_BOUND('',#178938,.T.); +#178938 = EDGE_LOOP('',(#178939,#178948,#178949,#178950)); +#178939 = ORIENTED_EDGE('',*,*,#178940,.T.); +#178940 = EDGE_CURVE('',#178941,#178849,#178943,.T.); +#178941 = VERTEX_POINT('',#178942); +#178942 = CARTESIAN_POINT('',(-1.75,-1.9,0.35)); +#178943 = CIRCLE('',#178944,0.15); +#178944 = AXIS2_PLACEMENT_3D('',#178945,#178946,#178947); +#178945 = CARTESIAN_POINT('',(-1.75,-1.75,0.35)); +#178946 = DIRECTION('',(0.,0.,-1.)); +#178947 = DIRECTION('',(0.,-1.,0.)); +#178948 = ORIENTED_EDGE('',*,*,#178848,.F.); +#178949 = ORIENTED_EDGE('',*,*,#178799,.F.); +#178950 = ORIENTED_EDGE('',*,*,#178951,.T.); +#178951 = EDGE_CURVE('',#178792,#178941,#178952,.T.); +#178952 = CIRCLE('',#178953,0.1); +#178953 = AXIS2_PLACEMENT_3D('',#178954,#178955,#178956); +#178954 = CARTESIAN_POINT('',(-1.75,-1.9,0.25)); +#178955 = DIRECTION('',(-1.,0.,0.)); +#178956 = DIRECTION('',(0.,-1.,0.)); +#178957 = TOROIDAL_SURFACE('',#178958,0.15,0.1); +#178958 = AXIS2_PLACEMENT_3D('',#178959,#178960,#178961); +#178959 = CARTESIAN_POINT('',(-1.75,-1.75,0.25)); +#178960 = DIRECTION('',(0.,0.,1.)); +#178961 = DIRECTION('',(0.,-1.,0.)); +#178962 = ADVANCED_FACE('',(#178963),#178988,.T.); +#178963 = FACE_BOUND('',#178964,.T.); +#178964 = EDGE_LOOP('',(#178965,#178975,#178981,#178982)); +#178965 = ORIENTED_EDGE('',*,*,#178966,.T.); +#178966 = EDGE_CURVE('',#178967,#178969,#178971,.T.); +#178967 = VERTEX_POINT('',#178968); +#178968 = CARTESIAN_POINT('',(-0.8,-2.,0.1)); +#178969 = VERTEX_POINT('',#178970); +#178970 = CARTESIAN_POINT('',(-0.8,-2.,0.25)); +#178971 = LINE('',#178972,#178973); +#178972 = CARTESIAN_POINT('',(-0.8,-2.,0.)); +#178973 = VECTOR('',#178974,1.); +#178974 = DIRECTION('',(0.,0.,1.)); +#178975 = ORIENTED_EDGE('',*,*,#178976,.T.); +#178976 = EDGE_CURVE('',#178969,#178792,#178977,.T.); +#178977 = LINE('',#178978,#178979); +#178978 = CARTESIAN_POINT('',(-0.8,-2.,0.25)); +#178979 = VECTOR('',#178980,1.); +#178980 = DIRECTION('',(-1.,0.,0.)); +#178981 = ORIENTED_EDGE('',*,*,#178791,.F.); +#178982 = ORIENTED_EDGE('',*,*,#178983,.F.); +#178983 = EDGE_CURVE('',#178967,#178783,#178984,.T.); +#178984 = LINE('',#178985,#178986); +#178985 = CARTESIAN_POINT('',(-0.8,-2.,0.1)); +#178986 = VECTOR('',#178987,1.); +#178987 = DIRECTION('',(-1.,0.,0.)); +#178988 = PLANE('',#178989); +#178989 = AXIS2_PLACEMENT_3D('',#178990,#178991,#178992); +#178990 = CARTESIAN_POINT('',(-0.8,-2.,0.)); +#178991 = DIRECTION('',(0.,-1.,0.)); +#178992 = DIRECTION('',(-1.,0.,0.)); +#178993 = ADVANCED_FACE('',(#178994),#179029,.T.); +#178994 = FACE_BOUND('',#178995,.T.); +#178995 = EDGE_LOOP('',(#178996,#179004,#179005,#179006,#179015,#179023) + ); +#178996 = ORIENTED_EDGE('',*,*,#178997,.T.); +#178997 = EDGE_CURVE('',#178998,#178915,#179000,.T.); +#178998 = VERTEX_POINT('',#178999); +#178999 = CARTESIAN_POINT('',(-0.9,-1.9,-1.387778780781E-17)); +#179000 = LINE('',#179001,#179002); +#179001 = CARTESIAN_POINT('',(-0.8,-1.9,-1.387778780781E-17)); +#179002 = VECTOR('',#179003,1.); +#179003 = DIRECTION('',(-1.,0.,0.)); +#179004 = ORIENTED_EDGE('',*,*,#178925,.T.); +#179005 = ORIENTED_EDGE('',*,*,#178825,.T.); +#179006 = ORIENTED_EDGE('',*,*,#179007,.T.); +#179007 = EDGE_CURVE('',#178817,#179008,#179010,.T.); +#179008 = VERTEX_POINT('',#179009); +#179009 = CARTESIAN_POINT('',(-1.75,1.9,0.)); +#179010 = CIRCLE('',#179011,0.15); +#179011 = AXIS2_PLACEMENT_3D('',#179012,#179013,#179014); +#179012 = CARTESIAN_POINT('',(-1.75,1.75,0.)); +#179013 = DIRECTION('',(0.,0.,-1.)); +#179014 = DIRECTION('',(-1.,0.,0.)); +#179015 = ORIENTED_EDGE('',*,*,#179016,.T.); +#179016 = EDGE_CURVE('',#179008,#179017,#179019,.T.); +#179017 = VERTEX_POINT('',#179018); +#179018 = CARTESIAN_POINT('',(-0.9,1.9,-1.387778780781E-17)); +#179019 = LINE('',#179020,#179021); +#179020 = CARTESIAN_POINT('',(-1.75,1.9,-1.387778780781E-17)); +#179021 = VECTOR('',#179022,1.); +#179022 = DIRECTION('',(1.,0.,0.)); +#179023 = ORIENTED_EDGE('',*,*,#179024,.T.); +#179024 = EDGE_CURVE('',#179017,#178998,#179025,.T.); +#179025 = LINE('',#179026,#179027); +#179026 = CARTESIAN_POINT('',(-0.9,2.,-1.387778780781E-17)); +#179027 = VECTOR('',#179028,1.); +#179028 = DIRECTION('',(0.,-1.,0.)); +#179029 = PLANE('',#179030); +#179030 = AXIS2_PLACEMENT_3D('',#179031,#179032,#179033); +#179031 = CARTESIAN_POINT('',(-1.385751497557,5.727603233408E-17,0.)); +#179032 = DIRECTION('',(-0.,-0.,-1.)); +#179033 = DIRECTION('',(-1.,0.,0.)); +#179034 = ADVANCED_FACE('',(#179035),#179047,.T.); +#179035 = FACE_BOUND('',#179036,.T.); +#179036 = EDGE_LOOP('',(#179037,#179038,#179039,#179046)); +#179037 = ORIENTED_EDGE('',*,*,#178816,.F.); +#179038 = ORIENTED_EDGE('',*,*,#178881,.T.); +#179039 = ORIENTED_EDGE('',*,*,#179040,.T.); +#179040 = EDGE_CURVE('',#178882,#179008,#179041,.T.); +#179041 = CIRCLE('',#179042,0.1); +#179042 = AXIS2_PLACEMENT_3D('',#179043,#179044,#179045); +#179043 = CARTESIAN_POINT('',(-1.75,1.9,0.1)); +#179044 = DIRECTION('',(-1.,-6.123233995737E-17,-0.)); +#179045 = DIRECTION('',(-6.123233995737E-17,1.,0.)); +#179046 = ORIENTED_EDGE('',*,*,#179007,.F.); +#179047 = TOROIDAL_SURFACE('',#179048,0.15,0.1); +#179048 = AXIS2_PLACEMENT_3D('',#179049,#179050,#179051); +#179049 = CARTESIAN_POINT('',(-1.75,1.75,0.1)); +#179050 = DIRECTION('',(0.,0.,-1.)); +#179051 = DIRECTION('',(-1.,0.,0.)); +#179052 = ADVANCED_FACE('',(#179053),#179088,.F.); +#179053 = FACE_BOUND('',#179054,.F.); +#179054 = EDGE_LOOP('',(#179055,#179065,#179071,#179072,#179073,#179082) + ); +#179055 = ORIENTED_EDGE('',*,*,#179056,.T.); +#179056 = EDGE_CURVE('',#179057,#179059,#179061,.T.); +#179057 = VERTEX_POINT('',#179058); +#179058 = CARTESIAN_POINT('',(-0.8,1.9,0.35)); +#179059 = VERTEX_POINT('',#179060); +#179060 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#179061 = LINE('',#179062,#179063); +#179062 = CARTESIAN_POINT('',(-0.8,2.,0.35)); +#179063 = VECTOR('',#179064,1.); +#179064 = DIRECTION('',(0.,-1.,0.)); +#179065 = ORIENTED_EDGE('',*,*,#179066,.T.); +#179066 = EDGE_CURVE('',#179059,#178941,#179067,.T.); +#179067 = LINE('',#179068,#179069); +#179068 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#179069 = VECTOR('',#179070,1.); +#179070 = DIRECTION('',(-1.,0.,0.)); +#179071 = ORIENTED_EDGE('',*,*,#178940,.T.); +#179072 = ORIENTED_EDGE('',*,*,#178857,.T.); +#179073 = ORIENTED_EDGE('',*,*,#179074,.T.); +#179074 = EDGE_CURVE('',#178858,#179075,#179077,.T.); +#179075 = VERTEX_POINT('',#179076); +#179076 = CARTESIAN_POINT('',(-1.75,1.9,0.35)); +#179077 = CIRCLE('',#179078,0.15); +#179078 = AXIS2_PLACEMENT_3D('',#179079,#179080,#179081); +#179079 = CARTESIAN_POINT('',(-1.75,1.75,0.35)); +#179080 = DIRECTION('',(0.,0.,-1.)); +#179081 = DIRECTION('',(-1.,0.,0.)); +#179082 = ORIENTED_EDGE('',*,*,#179083,.T.); +#179083 = EDGE_CURVE('',#179075,#179057,#179084,.T.); +#179084 = LINE('',#179085,#179086); +#179085 = CARTESIAN_POINT('',(-1.75,1.9,0.35)); +#179086 = VECTOR('',#179087,1.); +#179087 = DIRECTION('',(1.,0.,0.)); +#179088 = PLANE('',#179089); +#179089 = AXIS2_PLACEMENT_3D('',#179090,#179091,#179092); +#179090 = CARTESIAN_POINT('',(-1.385751497557,5.727603233408E-17,0.35)); +#179091 = DIRECTION('',(-0.,-0.,-1.)); +#179092 = DIRECTION('',(-1.,0.,0.)); +#179093 = ADVANCED_FACE('',(#179094),#179106,.T.); +#179094 = FACE_BOUND('',#179095,.T.); +#179095 = EDGE_LOOP('',(#179096,#179097,#179104,#179105)); +#179096 = ORIENTED_EDGE('',*,*,#179074,.T.); +#179097 = ORIENTED_EDGE('',*,*,#179098,.F.); +#179098 = EDGE_CURVE('',#178892,#179075,#179099,.T.); +#179099 = CIRCLE('',#179100,0.1); +#179100 = AXIS2_PLACEMENT_3D('',#179101,#179102,#179103); +#179101 = CARTESIAN_POINT('',(-1.75,1.9,0.25)); +#179102 = DIRECTION('',(1.,6.123233995737E-17,-0.)); +#179103 = DIRECTION('',(-6.123233995737E-17,1.,0.)); +#179104 = ORIENTED_EDGE('',*,*,#178891,.F.); +#179105 = ORIENTED_EDGE('',*,*,#178865,.T.); +#179106 = TOROIDAL_SURFACE('',#179107,0.15,0.1); +#179107 = AXIS2_PLACEMENT_3D('',#179108,#179109,#179110); +#179108 = CARTESIAN_POINT('',(-1.75,1.75,0.25)); +#179109 = DIRECTION('',(0.,0.,1.)); +#179110 = DIRECTION('',(-1.,0.,0.)); +#179111 = ADVANCED_FACE('',(#179112),#179137,.T.); +#179112 = FACE_BOUND('',#179113,.T.); +#179113 = EDGE_LOOP('',(#179114,#179115,#179123,#179131)); +#179114 = ORIENTED_EDGE('',*,*,#178900,.T.); +#179115 = ORIENTED_EDGE('',*,*,#179116,.T.); +#179116 = EDGE_CURVE('',#178892,#179117,#179119,.T.); +#179117 = VERTEX_POINT('',#179118); +#179118 = CARTESIAN_POINT('',(-0.8,2.,0.25)); +#179119 = LINE('',#179120,#179121); +#179120 = CARTESIAN_POINT('',(-1.75,2.,0.25)); +#179121 = VECTOR('',#179122,1.); +#179122 = DIRECTION('',(1.,0.,0.)); +#179123 = ORIENTED_EDGE('',*,*,#179124,.F.); +#179124 = EDGE_CURVE('',#179125,#179117,#179127,.T.); +#179125 = VERTEX_POINT('',#179126); +#179126 = CARTESIAN_POINT('',(-0.8,2.,0.1)); +#179127 = LINE('',#179128,#179129); +#179128 = CARTESIAN_POINT('',(-0.8,2.,0.)); +#179129 = VECTOR('',#179130,1.); +#179130 = DIRECTION('',(0.,0.,1.)); +#179131 = ORIENTED_EDGE('',*,*,#179132,.F.); +#179132 = EDGE_CURVE('',#178882,#179125,#179133,.T.); +#179133 = LINE('',#179134,#179135); +#179134 = CARTESIAN_POINT('',(-1.75,2.,0.1)); +#179135 = VECTOR('',#179136,1.); +#179136 = DIRECTION('',(1.,0.,0.)); +#179137 = PLANE('',#179138); +#179138 = AXIS2_PLACEMENT_3D('',#179139,#179140,#179141); +#179139 = CARTESIAN_POINT('',(-1.75,2.,0.)); +#179140 = DIRECTION('',(0.,1.,0.)); +#179141 = DIRECTION('',(1.,0.,0.)); +#179142 = ADVANCED_FACE('',(#179143),#179155,.T.); +#179143 = FACE_BOUND('',#179144,.T.); +#179144 = EDGE_LOOP('',(#179145,#179146,#179147,#179148)); +#179145 = ORIENTED_EDGE('',*,*,#178983,.T.); +#179146 = ORIENTED_EDGE('',*,*,#178914,.T.); +#179147 = ORIENTED_EDGE('',*,*,#178997,.F.); +#179148 = ORIENTED_EDGE('',*,*,#179149,.F.); +#179149 = EDGE_CURVE('',#178967,#178998,#179150,.T.); +#179150 = ELLIPSE('',#179151,0.141421356237,0.1); +#179151 = AXIS2_PLACEMENT_3D('',#179152,#179153,#179154); +#179152 = CARTESIAN_POINT('',(-0.9,-1.9,0.1)); +#179153 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#179154 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179155 = CYLINDRICAL_SURFACE('',#179156,0.1); +#179156 = AXIS2_PLACEMENT_3D('',#179157,#179158,#179159); +#179157 = CARTESIAN_POINT('',(-0.8,-1.9,0.1)); +#179158 = DIRECTION('',(-1.,0.,0.)); +#179159 = DIRECTION('',(0.,-1.,0.)); +#179160 = ADVANCED_FACE('',(#179161),#179173,.T.); +#179161 = FACE_BOUND('',#179162,.T.); +#179162 = EDGE_LOOP('',(#179163,#179170,#179171,#179172)); +#179163 = ORIENTED_EDGE('',*,*,#179164,.T.); +#179164 = EDGE_CURVE('',#178969,#179059,#179165,.T.); +#179165 = CIRCLE('',#179166,0.1); +#179166 = AXIS2_PLACEMENT_3D('',#179167,#179168,#179169); +#179167 = CARTESIAN_POINT('',(-0.8,-1.9,0.25)); +#179168 = DIRECTION('',(-1.,0.,0.)); +#179169 = DIRECTION('',(0.,0.,-1.)); +#179170 = ORIENTED_EDGE('',*,*,#179066,.T.); +#179171 = ORIENTED_EDGE('',*,*,#178951,.F.); +#179172 = ORIENTED_EDGE('',*,*,#178976,.F.); +#179173 = CYLINDRICAL_SURFACE('',#179174,0.1); +#179174 = AXIS2_PLACEMENT_3D('',#179175,#179176,#179177); +#179175 = CARTESIAN_POINT('',(-0.8,-1.9,0.25)); +#179176 = DIRECTION('',(-1.,0.,0.)); +#179177 = DIRECTION('',(0.,-1.,0.)); +#179178 = ADVANCED_FACE('',(#179179),#179198,.T.); +#179179 = FACE_BOUND('',#179180,.T.); +#179180 = EDGE_LOOP('',(#179181,#179182,#179189,#179190,#179191,#179192) + ); +#179181 = ORIENTED_EDGE('',*,*,#179124,.T.); +#179182 = ORIENTED_EDGE('',*,*,#179183,.T.); +#179183 = EDGE_CURVE('',#179117,#179057,#179184,.T.); +#179184 = CIRCLE('',#179185,0.1); +#179185 = AXIS2_PLACEMENT_3D('',#179186,#179187,#179188); +#179186 = CARTESIAN_POINT('',(-0.8,1.9,0.25)); +#179187 = DIRECTION('',(1.,0.,-0.)); +#179188 = DIRECTION('',(0.,0.,1.)); +#179189 = ORIENTED_EDGE('',*,*,#179056,.T.); +#179190 = ORIENTED_EDGE('',*,*,#179164,.F.); +#179191 = ORIENTED_EDGE('',*,*,#178966,.F.); +#179192 = ORIENTED_EDGE('',*,*,#179193,.F.); +#179193 = EDGE_CURVE('',#179125,#178967,#179194,.T.); +#179194 = LINE('',#179195,#179196); +#179195 = CARTESIAN_POINT('',(-0.8,2.,0.1)); +#179196 = VECTOR('',#179197,1.); +#179197 = DIRECTION('',(0.,-1.,0.)); +#179198 = PLANE('',#179199); +#179199 = AXIS2_PLACEMENT_3D('',#179200,#179201,#179202); +#179200 = CARTESIAN_POINT('',(-0.8,2.,0.)); +#179201 = DIRECTION('',(1.,0.,0.)); +#179202 = DIRECTION('',(0.,-1.,0.)); +#179203 = ADVANCED_FACE('',(#179204),#179216,.T.); +#179204 = FACE_BOUND('',#179205,.T.); +#179205 = EDGE_LOOP('',(#179206,#179207,#179208,#179209)); +#179206 = ORIENTED_EDGE('',*,*,#179193,.T.); +#179207 = ORIENTED_EDGE('',*,*,#179149,.T.); +#179208 = ORIENTED_EDGE('',*,*,#179024,.F.); +#179209 = ORIENTED_EDGE('',*,*,#179210,.F.); +#179210 = EDGE_CURVE('',#179125,#179017,#179211,.T.); +#179211 = ELLIPSE('',#179212,0.141421356237,0.1); +#179212 = AXIS2_PLACEMENT_3D('',#179213,#179214,#179215); +#179213 = CARTESIAN_POINT('',(-0.9,1.9,0.1)); +#179214 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179215 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179216 = CYLINDRICAL_SURFACE('',#179217,0.1); +#179217 = AXIS2_PLACEMENT_3D('',#179218,#179219,#179220); +#179218 = CARTESIAN_POINT('',(-0.9,2.,0.1)); +#179219 = DIRECTION('',(0.,-1.,0.)); +#179220 = DIRECTION('',(1.,0.,0.)); +#179221 = ADVANCED_FACE('',(#179222),#179228,.T.); +#179222 = FACE_BOUND('',#179223,.T.); +#179223 = EDGE_LOOP('',(#179224,#179225,#179226,#179227)); +#179224 = ORIENTED_EDGE('',*,*,#179132,.T.); +#179225 = ORIENTED_EDGE('',*,*,#179210,.T.); +#179226 = ORIENTED_EDGE('',*,*,#179016,.F.); +#179227 = ORIENTED_EDGE('',*,*,#179040,.F.); +#179228 = CYLINDRICAL_SURFACE('',#179229,0.1); +#179229 = AXIS2_PLACEMENT_3D('',#179230,#179231,#179232); +#179230 = CARTESIAN_POINT('',(-1.75,1.9,0.1)); +#179231 = DIRECTION('',(1.,0.,0.)); +#179232 = DIRECTION('',(-0.,1.,0.)); +#179233 = ADVANCED_FACE('',(#179234),#179240,.T.); +#179234 = FACE_BOUND('',#179235,.T.); +#179235 = EDGE_LOOP('',(#179236,#179237,#179238,#179239)); +#179236 = ORIENTED_EDGE('',*,*,#179098,.T.); +#179237 = ORIENTED_EDGE('',*,*,#179083,.T.); +#179238 = ORIENTED_EDGE('',*,*,#179183,.F.); +#179239 = ORIENTED_EDGE('',*,*,#179116,.F.); +#179240 = CYLINDRICAL_SURFACE('',#179241,0.1); +#179241 = AXIS2_PLACEMENT_3D('',#179242,#179243,#179244); +#179242 = CARTESIAN_POINT('',(-1.75,1.9,0.25)); +#179243 = DIRECTION('',(1.,0.,0.)); +#179244 = DIRECTION('',(-0.,1.,0.)); +#179245 = MANIFOLD_SOLID_BREP('',#179246); +#179246 = CLOSED_SHELL('',(#179247,#179287,#179320,#179353,#179386, + #179427,#179458,#179484,#179510,#179551,#179569,#179603,#179634, + #179652,#179676,#179694,#179712,#179730,#179742)); +#179247 = ADVANCED_FACE('',(#179248),#179282,.F.); +#179248 = FACE_BOUND('',#179249,.F.); +#179249 = EDGE_LOOP('',(#179250,#179260,#179268,#179276)); +#179250 = ORIENTED_EDGE('',*,*,#179251,.T.); +#179251 = EDGE_CURVE('',#179252,#179254,#179256,.T.); +#179252 = VERTEX_POINT('',#179253); +#179253 = CARTESIAN_POINT('',(1.749999999999,2.,0.1)); +#179254 = VERTEX_POINT('',#179255); +#179255 = CARTESIAN_POINT('',(1.749999999999,2.,0.25)); +#179256 = LINE('',#179257,#179258); +#179257 = CARTESIAN_POINT('',(1.749999999999,2.,0.)); +#179258 = VECTOR('',#179259,1.); +#179259 = DIRECTION('',(0.,0.,1.)); +#179260 = ORIENTED_EDGE('',*,*,#179261,.T.); +#179261 = EDGE_CURVE('',#179254,#179262,#179264,.T.); +#179262 = VERTEX_POINT('',#179263); +#179263 = CARTESIAN_POINT('',(0.8,2.,0.25)); +#179264 = LINE('',#179265,#179266); +#179265 = CARTESIAN_POINT('',(1.749999999999,2.,0.25)); +#179266 = VECTOR('',#179267,1.); +#179267 = DIRECTION('',(-1.,0.,0.)); +#179268 = ORIENTED_EDGE('',*,*,#179269,.F.); +#179269 = EDGE_CURVE('',#179270,#179262,#179272,.T.); +#179270 = VERTEX_POINT('',#179271); +#179271 = CARTESIAN_POINT('',(0.8,2.,0.1)); +#179272 = LINE('',#179273,#179274); +#179273 = CARTESIAN_POINT('',(0.8,2.,0.)); +#179274 = VECTOR('',#179275,1.); +#179275 = DIRECTION('',(0.,0.,1.)); +#179276 = ORIENTED_EDGE('',*,*,#179277,.F.); +#179277 = EDGE_CURVE('',#179252,#179270,#179278,.T.); +#179278 = LINE('',#179279,#179280); +#179279 = CARTESIAN_POINT('',(1.749999999999,2.,0.1)); +#179280 = VECTOR('',#179281,1.); +#179281 = DIRECTION('',(-1.,0.,0.)); +#179282 = PLANE('',#179283); +#179283 = AXIS2_PLACEMENT_3D('',#179284,#179285,#179286); +#179284 = CARTESIAN_POINT('',(1.749999999999,2.,0.)); +#179285 = DIRECTION('',(0.,-1.,0.)); +#179286 = DIRECTION('',(-1.,0.,0.)); +#179287 = ADVANCED_FACE('',(#179288),#179315,.T.); +#179288 = FACE_BOUND('',#179289,.T.); +#179289 = EDGE_LOOP('',(#179290,#179299,#179300,#179309)); +#179290 = ORIENTED_EDGE('',*,*,#179291,.T.); +#179291 = EDGE_CURVE('',#179292,#179252,#179294,.T.); +#179292 = VERTEX_POINT('',#179293); +#179293 = CARTESIAN_POINT('',(1.999999999999,1.75,0.1)); +#179294 = CIRCLE('',#179295,0.25); +#179295 = AXIS2_PLACEMENT_3D('',#179296,#179297,#179298); +#179296 = CARTESIAN_POINT('',(1.749999999999,1.75,0.1)); +#179297 = DIRECTION('',(0.,0.,1.)); +#179298 = DIRECTION('',(1.,0.,-0.)); +#179299 = ORIENTED_EDGE('',*,*,#179251,.T.); +#179300 = ORIENTED_EDGE('',*,*,#179301,.F.); +#179301 = EDGE_CURVE('',#179302,#179254,#179304,.T.); +#179302 = VERTEX_POINT('',#179303); +#179303 = CARTESIAN_POINT('',(1.999999999999,1.75,0.25)); +#179304 = CIRCLE('',#179305,0.25); +#179305 = AXIS2_PLACEMENT_3D('',#179306,#179307,#179308); +#179306 = CARTESIAN_POINT('',(1.749999999999,1.75,0.25)); +#179307 = DIRECTION('',(0.,0.,1.)); +#179308 = DIRECTION('',(1.,0.,-0.)); +#179309 = ORIENTED_EDGE('',*,*,#179310,.F.); +#179310 = EDGE_CURVE('',#179292,#179302,#179311,.T.); +#179311 = LINE('',#179312,#179313); +#179312 = CARTESIAN_POINT('',(1.999999999999,1.75,0.)); +#179313 = VECTOR('',#179314,1.); +#179314 = DIRECTION('',(0.,0.,1.)); +#179315 = CYLINDRICAL_SURFACE('',#179316,0.25); +#179316 = AXIS2_PLACEMENT_3D('',#179317,#179318,#179319); +#179317 = CARTESIAN_POINT('',(1.749999999999,1.75,0.)); +#179318 = DIRECTION('',(-0.,-0.,-1.)); +#179319 = DIRECTION('',(1.,0.,0.)); +#179320 = ADVANCED_FACE('',(#179321),#179348,.T.); +#179321 = FACE_BOUND('',#179322,.T.); +#179322 = EDGE_LOOP('',(#179323,#179332,#179340,#179347)); +#179323 = ORIENTED_EDGE('',*,*,#179324,.T.); +#179324 = EDGE_CURVE('',#179252,#179325,#179327,.T.); +#179325 = VERTEX_POINT('',#179326); +#179326 = CARTESIAN_POINT('',(1.749999999999,1.9,0.)); +#179327 = CIRCLE('',#179328,0.1); +#179328 = AXIS2_PLACEMENT_3D('',#179329,#179330,#179331); +#179329 = CARTESIAN_POINT('',(1.749999999999,1.9,0.1)); +#179330 = DIRECTION('',(-1.,-8.269460797428E-16,-0.)); +#179331 = DIRECTION('',(-8.269460797428E-16,1.,0.)); +#179332 = ORIENTED_EDGE('',*,*,#179333,.T.); +#179333 = EDGE_CURVE('',#179325,#179334,#179336,.T.); +#179334 = VERTEX_POINT('',#179335); +#179335 = CARTESIAN_POINT('',(0.9,1.9,-1.387778780781E-17)); +#179336 = LINE('',#179337,#179338); +#179337 = CARTESIAN_POINT('',(1.749999999999,1.9,-1.387778780781E-17)); +#179338 = VECTOR('',#179339,1.); +#179339 = DIRECTION('',(-1.,0.,0.)); +#179340 = ORIENTED_EDGE('',*,*,#179341,.F.); +#179341 = EDGE_CURVE('',#179270,#179334,#179342,.T.); +#179342 = ELLIPSE('',#179343,0.141421356237,0.1); +#179343 = AXIS2_PLACEMENT_3D('',#179344,#179345,#179346); +#179344 = CARTESIAN_POINT('',(0.9,1.9,0.1)); +#179345 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#179346 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#179347 = ORIENTED_EDGE('',*,*,#179277,.F.); +#179348 = CYLINDRICAL_SURFACE('',#179349,0.1); +#179349 = AXIS2_PLACEMENT_3D('',#179350,#179351,#179352); +#179350 = CARTESIAN_POINT('',(1.749999999999,1.9,0.1)); +#179351 = DIRECTION('',(-1.,0.,0.)); +#179352 = DIRECTION('',(0.,1.,0.)); +#179353 = ADVANCED_FACE('',(#179354),#179381,.T.); +#179354 = FACE_BOUND('',#179355,.T.); +#179355 = EDGE_LOOP('',(#179356,#179357,#179366,#179374)); +#179356 = ORIENTED_EDGE('',*,*,#179261,.T.); +#179357 = ORIENTED_EDGE('',*,*,#179358,.T.); +#179358 = EDGE_CURVE('',#179262,#179359,#179361,.T.); +#179359 = VERTEX_POINT('',#179360); +#179360 = CARTESIAN_POINT('',(0.8,1.9,0.35)); +#179361 = CIRCLE('',#179362,0.1); +#179362 = AXIS2_PLACEMENT_3D('',#179363,#179364,#179365); +#179363 = CARTESIAN_POINT('',(0.8,1.9,0.25)); +#179364 = DIRECTION('',(1.,-0.,0.)); +#179365 = DIRECTION('',(0.,0.,-1.)); +#179366 = ORIENTED_EDGE('',*,*,#179367,.F.); +#179367 = EDGE_CURVE('',#179368,#179359,#179370,.T.); +#179368 = VERTEX_POINT('',#179369); +#179369 = CARTESIAN_POINT('',(1.749999999999,1.9,0.35)); +#179370 = LINE('',#179371,#179372); +#179371 = CARTESIAN_POINT('',(1.749999999999,1.9,0.35)); +#179372 = VECTOR('',#179373,1.); +#179373 = DIRECTION('',(-1.,0.,0.)); +#179374 = ORIENTED_EDGE('',*,*,#179375,.F.); +#179375 = EDGE_CURVE('',#179254,#179368,#179376,.T.); +#179376 = CIRCLE('',#179377,0.1); +#179377 = AXIS2_PLACEMENT_3D('',#179378,#179379,#179380); +#179378 = CARTESIAN_POINT('',(1.749999999999,1.9,0.25)); +#179379 = DIRECTION('',(1.,8.269460797428E-16,-0.)); +#179380 = DIRECTION('',(-8.269460797428E-16,1.,0.)); +#179381 = CYLINDRICAL_SURFACE('',#179382,0.1); +#179382 = AXIS2_PLACEMENT_3D('',#179383,#179384,#179385); +#179383 = CARTESIAN_POINT('',(1.749999999999,1.9,0.25)); +#179384 = DIRECTION('',(-1.,0.,0.)); +#179385 = DIRECTION('',(0.,1.,0.)); +#179386 = ADVANCED_FACE('',(#179387),#179422,.F.); +#179387 = FACE_BOUND('',#179388,.F.); +#179388 = EDGE_LOOP('',(#179389,#179390,#179391,#179399,#179408,#179416) + ); +#179389 = ORIENTED_EDGE('',*,*,#179269,.T.); +#179390 = ORIENTED_EDGE('',*,*,#179358,.T.); +#179391 = ORIENTED_EDGE('',*,*,#179392,.T.); +#179392 = EDGE_CURVE('',#179359,#179393,#179395,.T.); +#179393 = VERTEX_POINT('',#179394); +#179394 = CARTESIAN_POINT('',(0.8,-1.9,0.35)); +#179395 = LINE('',#179396,#179397); +#179396 = CARTESIAN_POINT('',(0.8,2.,0.35)); +#179397 = VECTOR('',#179398,1.); +#179398 = DIRECTION('',(0.,-1.,0.)); +#179399 = ORIENTED_EDGE('',*,*,#179400,.F.); +#179400 = EDGE_CURVE('',#179401,#179393,#179403,.T.); +#179401 = VERTEX_POINT('',#179402); +#179402 = CARTESIAN_POINT('',(0.8,-2.,0.25)); +#179403 = CIRCLE('',#179404,0.1); +#179404 = AXIS2_PLACEMENT_3D('',#179405,#179406,#179407); +#179405 = CARTESIAN_POINT('',(0.8,-1.9,0.25)); +#179406 = DIRECTION('',(-1.,0.,0.)); +#179407 = DIRECTION('',(0.,0.,1.)); +#179408 = ORIENTED_EDGE('',*,*,#179409,.F.); +#179409 = EDGE_CURVE('',#179410,#179401,#179412,.T.); +#179410 = VERTEX_POINT('',#179411); +#179411 = CARTESIAN_POINT('',(0.8,-2.,0.1)); +#179412 = LINE('',#179413,#179414); +#179413 = CARTESIAN_POINT('',(0.8,-2.,0.)); +#179414 = VECTOR('',#179415,1.); +#179415 = DIRECTION('',(0.,0.,1.)); +#179416 = ORIENTED_EDGE('',*,*,#179417,.F.); +#179417 = EDGE_CURVE('',#179270,#179410,#179418,.T.); +#179418 = LINE('',#179419,#179420); +#179419 = CARTESIAN_POINT('',(0.8,2.,0.1)); +#179420 = VECTOR('',#179421,1.); +#179421 = DIRECTION('',(0.,-1.,0.)); +#179422 = PLANE('',#179423); +#179423 = AXIS2_PLACEMENT_3D('',#179424,#179425,#179426); +#179424 = CARTESIAN_POINT('',(0.8,2.,0.)); +#179425 = DIRECTION('',(1.,0.,0.)); +#179426 = DIRECTION('',(0.,-1.,0.)); +#179427 = ADVANCED_FACE('',(#179428),#179453,.F.); +#179428 = FACE_BOUND('',#179429,.F.); +#179429 = EDGE_LOOP('',(#179430,#179440,#179446,#179447)); +#179430 = ORIENTED_EDGE('',*,*,#179431,.T.); +#179431 = EDGE_CURVE('',#179432,#179434,#179436,.T.); +#179432 = VERTEX_POINT('',#179433); +#179433 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.1)); +#179434 = VERTEX_POINT('',#179435); +#179435 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.25)); +#179436 = LINE('',#179437,#179438); +#179437 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.)); +#179438 = VECTOR('',#179439,1.); +#179439 = DIRECTION('',(0.,0.,1.)); +#179440 = ORIENTED_EDGE('',*,*,#179441,.T.); +#179441 = EDGE_CURVE('',#179434,#179302,#179442,.T.); +#179442 = LINE('',#179443,#179444); +#179443 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.25)); +#179444 = VECTOR('',#179445,1.); +#179445 = DIRECTION('',(0.,1.,0.)); +#179446 = ORIENTED_EDGE('',*,*,#179310,.F.); +#179447 = ORIENTED_EDGE('',*,*,#179448,.F.); +#179448 = EDGE_CURVE('',#179432,#179292,#179449,.T.); +#179449 = LINE('',#179450,#179451); +#179450 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.1)); +#179451 = VECTOR('',#179452,1.); +#179452 = DIRECTION('',(0.,1.,0.)); +#179453 = PLANE('',#179454); +#179454 = AXIS2_PLACEMENT_3D('',#179455,#179456,#179457); +#179455 = CARTESIAN_POINT('',(1.999999999999,-1.75,0.)); +#179456 = DIRECTION('',(-1.,0.,0.)); +#179457 = DIRECTION('',(0.,1.,0.)); +#179458 = ADVANCED_FACE('',(#179459),#179479,.T.); +#179459 = FACE_BOUND('',#179460,.T.); +#179460 = EDGE_LOOP('',(#179461,#179470,#179471,#179472)); +#179461 = ORIENTED_EDGE('',*,*,#179462,.T.); +#179462 = EDGE_CURVE('',#179463,#179325,#179465,.T.); +#179463 = VERTEX_POINT('',#179464); +#179464 = CARTESIAN_POINT('',(1.899999999999,1.75,-1.387778780781E-17)); +#179465 = CIRCLE('',#179466,0.15); +#179466 = AXIS2_PLACEMENT_3D('',#179467,#179468,#179469); +#179467 = CARTESIAN_POINT('',(1.749999999999,1.75,0.)); +#179468 = DIRECTION('',(0.,0.,1.)); +#179469 = DIRECTION('',(1.,0.,-0.)); +#179470 = ORIENTED_EDGE('',*,*,#179324,.F.); +#179471 = ORIENTED_EDGE('',*,*,#179291,.F.); +#179472 = ORIENTED_EDGE('',*,*,#179473,.T.); +#179473 = EDGE_CURVE('',#179292,#179463,#179474,.T.); +#179474 = CIRCLE('',#179475,0.1); +#179475 = AXIS2_PLACEMENT_3D('',#179476,#179477,#179478); +#179476 = CARTESIAN_POINT('',(1.899999999999,1.75,0.1)); +#179477 = DIRECTION('',(-0.,1.,0.)); +#179478 = DIRECTION('',(1.,0.,0.)); +#179479 = TOROIDAL_SURFACE('',#179480,0.15,0.1); +#179480 = AXIS2_PLACEMENT_3D('',#179481,#179482,#179483); +#179481 = CARTESIAN_POINT('',(1.749999999999,1.75,0.1)); +#179482 = DIRECTION('',(-0.,-0.,-1.)); +#179483 = DIRECTION('',(1.,0.,0.)); +#179484 = ADVANCED_FACE('',(#179485),#179505,.T.); +#179485 = FACE_BOUND('',#179486,.T.); +#179486 = EDGE_LOOP('',(#179487,#179496,#179497,#179498)); +#179487 = ORIENTED_EDGE('',*,*,#179488,.F.); +#179488 = EDGE_CURVE('',#179302,#179489,#179491,.T.); +#179489 = VERTEX_POINT('',#179490); +#179490 = CARTESIAN_POINT('',(1.899999999999,1.75,0.35)); +#179491 = CIRCLE('',#179492,0.1); +#179492 = AXIS2_PLACEMENT_3D('',#179493,#179494,#179495); +#179493 = CARTESIAN_POINT('',(1.899999999999,1.75,0.25)); +#179494 = DIRECTION('',(0.,-1.,0.)); +#179495 = DIRECTION('',(1.,0.,0.)); +#179496 = ORIENTED_EDGE('',*,*,#179301,.T.); +#179497 = ORIENTED_EDGE('',*,*,#179375,.T.); +#179498 = ORIENTED_EDGE('',*,*,#179499,.F.); +#179499 = EDGE_CURVE('',#179489,#179368,#179500,.T.); +#179500 = CIRCLE('',#179501,0.15); +#179501 = AXIS2_PLACEMENT_3D('',#179502,#179503,#179504); +#179502 = CARTESIAN_POINT('',(1.749999999999,1.75,0.35)); +#179503 = DIRECTION('',(0.,0.,1.)); +#179504 = DIRECTION('',(1.,0.,-0.)); +#179505 = TOROIDAL_SURFACE('',#179506,0.15,0.1); +#179506 = AXIS2_PLACEMENT_3D('',#179507,#179508,#179509); +#179507 = CARTESIAN_POINT('',(1.749999999999,1.75,0.25)); +#179508 = DIRECTION('',(0.,0.,1.)); +#179509 = DIRECTION('',(1.,0.,-0.)); +#179510 = ADVANCED_FACE('',(#179511),#179546,.F.); +#179511 = FACE_BOUND('',#179512,.F.); +#179512 = EDGE_LOOP('',(#179513,#179523,#179532,#179538,#179539,#179540) + ); +#179513 = ORIENTED_EDGE('',*,*,#179514,.T.); +#179514 = EDGE_CURVE('',#179515,#179517,#179519,.T.); +#179515 = VERTEX_POINT('',#179516); +#179516 = CARTESIAN_POINT('',(0.9,-1.9,-1.387778780781E-17)); +#179517 = VERTEX_POINT('',#179518); +#179518 = CARTESIAN_POINT('',(1.749999999999,-1.9,-1.387778780781E-17)); +#179519 = LINE('',#179520,#179521); +#179520 = CARTESIAN_POINT('',(0.8,-1.9,-1.387778780781E-17)); +#179521 = VECTOR('',#179522,1.); +#179522 = DIRECTION('',(1.,0.,0.)); +#179523 = ORIENTED_EDGE('',*,*,#179524,.T.); +#179524 = EDGE_CURVE('',#179517,#179525,#179527,.T.); +#179525 = VERTEX_POINT('',#179526); +#179526 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.)); +#179527 = CIRCLE('',#179528,0.15); +#179528 = AXIS2_PLACEMENT_3D('',#179529,#179530,#179531); +#179529 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.)); +#179530 = DIRECTION('',(0.,0.,1.)); +#179531 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179532 = ORIENTED_EDGE('',*,*,#179533,.T.); +#179533 = EDGE_CURVE('',#179525,#179463,#179534,.T.); +#179534 = LINE('',#179535,#179536); +#179535 = CARTESIAN_POINT('',(1.899999999999,-1.75,-1.387778780781E-17) + ); +#179536 = VECTOR('',#179537,1.); +#179537 = DIRECTION('',(0.,1.,0.)); +#179538 = ORIENTED_EDGE('',*,*,#179462,.T.); +#179539 = ORIENTED_EDGE('',*,*,#179333,.T.); +#179540 = ORIENTED_EDGE('',*,*,#179541,.T.); +#179541 = EDGE_CURVE('',#179334,#179515,#179542,.T.); +#179542 = LINE('',#179543,#179544); +#179543 = CARTESIAN_POINT('',(0.9,2.,-1.387778780781E-17)); +#179544 = VECTOR('',#179545,1.); +#179545 = DIRECTION('',(0.,-1.,0.)); +#179546 = PLANE('',#179547); +#179547 = AXIS2_PLACEMENT_3D('',#179548,#179549,#179550); +#179548 = CARTESIAN_POINT('',(1.385751497556,4.091145166721E-17,0.)); +#179549 = DIRECTION('',(0.,0.,1.)); +#179550 = DIRECTION('',(1.,0.,-0.)); +#179551 = ADVANCED_FACE('',(#179552),#179564,.T.); +#179552 = FACE_BOUND('',#179553,.T.); +#179553 = EDGE_LOOP('',(#179554,#179555,#179556,#179563)); +#179554 = ORIENTED_EDGE('',*,*,#179341,.T.); +#179555 = ORIENTED_EDGE('',*,*,#179541,.T.); +#179556 = ORIENTED_EDGE('',*,*,#179557,.F.); +#179557 = EDGE_CURVE('',#179410,#179515,#179558,.T.); +#179558 = ELLIPSE('',#179559,0.141421356237,0.1); +#179559 = AXIS2_PLACEMENT_3D('',#179560,#179561,#179562); +#179560 = CARTESIAN_POINT('',(0.9,-1.9,0.1)); +#179561 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#179562 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#179563 = ORIENTED_EDGE('',*,*,#179417,.F.); +#179564 = CYLINDRICAL_SURFACE('',#179565,0.1); +#179565 = AXIS2_PLACEMENT_3D('',#179566,#179567,#179568); +#179566 = CARTESIAN_POINT('',(0.9,2.,0.1)); +#179567 = DIRECTION('',(0.,-1.,0.)); +#179568 = DIRECTION('',(-1.,0.,0.)); +#179569 = ADVANCED_FACE('',(#179570),#179598,.T.); +#179570 = FACE_BOUND('',#179571,.T.); +#179571 = EDGE_LOOP('',(#179572,#179573,#179581,#179590,#179596,#179597) + ); +#179572 = ORIENTED_EDGE('',*,*,#179392,.T.); +#179573 = ORIENTED_EDGE('',*,*,#179574,.T.); +#179574 = EDGE_CURVE('',#179393,#179575,#179577,.T.); +#179575 = VERTEX_POINT('',#179576); +#179576 = CARTESIAN_POINT('',(1.749999999999,-1.9,0.35)); +#179577 = LINE('',#179578,#179579); +#179578 = CARTESIAN_POINT('',(0.8,-1.9,0.35)); +#179579 = VECTOR('',#179580,1.); +#179580 = DIRECTION('',(1.,0.,0.)); +#179581 = ORIENTED_EDGE('',*,*,#179582,.T.); +#179582 = EDGE_CURVE('',#179575,#179583,#179585,.T.); +#179583 = VERTEX_POINT('',#179584); +#179584 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.35)); +#179585 = CIRCLE('',#179586,0.15); +#179586 = AXIS2_PLACEMENT_3D('',#179587,#179588,#179589); +#179587 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.35)); +#179588 = DIRECTION('',(0.,0.,1.)); +#179589 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179590 = ORIENTED_EDGE('',*,*,#179591,.T.); +#179591 = EDGE_CURVE('',#179583,#179489,#179592,.T.); +#179592 = LINE('',#179593,#179594); +#179593 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.35)); +#179594 = VECTOR('',#179595,1.); +#179595 = DIRECTION('',(0.,1.,0.)); +#179596 = ORIENTED_EDGE('',*,*,#179499,.T.); +#179597 = ORIENTED_EDGE('',*,*,#179367,.T.); +#179598 = PLANE('',#179599); +#179599 = AXIS2_PLACEMENT_3D('',#179600,#179601,#179602); +#179600 = CARTESIAN_POINT('',(1.385751497556,4.091145166721E-17,0.35)); +#179601 = DIRECTION('',(0.,0.,1.)); +#179602 = DIRECTION('',(1.,0.,-0.)); +#179603 = ADVANCED_FACE('',(#179604),#179629,.F.); +#179604 = FACE_BOUND('',#179605,.F.); +#179605 = EDGE_LOOP('',(#179606,#179607,#179615,#179623)); +#179606 = ORIENTED_EDGE('',*,*,#179409,.T.); +#179607 = ORIENTED_EDGE('',*,*,#179608,.T.); +#179608 = EDGE_CURVE('',#179401,#179609,#179611,.T.); +#179609 = VERTEX_POINT('',#179610); +#179610 = CARTESIAN_POINT('',(1.749999999999,-2.,0.25)); +#179611 = LINE('',#179612,#179613); +#179612 = CARTESIAN_POINT('',(0.8,-2.,0.25)); +#179613 = VECTOR('',#179614,1.); +#179614 = DIRECTION('',(1.,0.,0.)); +#179615 = ORIENTED_EDGE('',*,*,#179616,.F.); +#179616 = EDGE_CURVE('',#179617,#179609,#179619,.T.); +#179617 = VERTEX_POINT('',#179618); +#179618 = CARTESIAN_POINT('',(1.749999999999,-2.,0.1)); +#179619 = LINE('',#179620,#179621); +#179620 = CARTESIAN_POINT('',(1.749999999999,-2.,0.)); +#179621 = VECTOR('',#179622,1.); +#179622 = DIRECTION('',(0.,0.,1.)); +#179623 = ORIENTED_EDGE('',*,*,#179624,.F.); +#179624 = EDGE_CURVE('',#179410,#179617,#179625,.T.); +#179625 = LINE('',#179626,#179627); +#179626 = CARTESIAN_POINT('',(0.8,-2.,0.1)); +#179627 = VECTOR('',#179628,1.); +#179628 = DIRECTION('',(1.,0.,0.)); +#179629 = PLANE('',#179630); +#179630 = AXIS2_PLACEMENT_3D('',#179631,#179632,#179633); +#179631 = CARTESIAN_POINT('',(0.8,-2.,0.)); +#179632 = DIRECTION('',(0.,1.,0.)); +#179633 = DIRECTION('',(1.,0.,0.)); +#179634 = ADVANCED_FACE('',(#179635),#179647,.T.); +#179635 = FACE_BOUND('',#179636,.T.); +#179636 = EDGE_LOOP('',(#179637,#179638,#179645,#179646)); +#179637 = ORIENTED_EDGE('',*,*,#179608,.T.); +#179638 = ORIENTED_EDGE('',*,*,#179639,.T.); +#179639 = EDGE_CURVE('',#179609,#179575,#179640,.T.); +#179640 = CIRCLE('',#179641,0.1); +#179641 = AXIS2_PLACEMENT_3D('',#179642,#179643,#179644); +#179642 = CARTESIAN_POINT('',(1.749999999999,-1.9,0.25)); +#179643 = DIRECTION('',(-1.,0.,0.)); +#179644 = DIRECTION('',(0.,-1.,0.)); +#179645 = ORIENTED_EDGE('',*,*,#179574,.F.); +#179646 = ORIENTED_EDGE('',*,*,#179400,.F.); +#179647 = CYLINDRICAL_SURFACE('',#179648,0.1); +#179648 = AXIS2_PLACEMENT_3D('',#179649,#179650,#179651); +#179649 = CARTESIAN_POINT('',(0.8,-1.9,0.25)); +#179650 = DIRECTION('',(1.,0.,0.)); +#179651 = DIRECTION('',(0.,-1.,0.)); +#179652 = ADVANCED_FACE('',(#179653),#179671,.T.); +#179653 = FACE_BOUND('',#179654,.T.); +#179654 = EDGE_LOOP('',(#179655,#179662,#179663,#179670)); +#179655 = ORIENTED_EDGE('',*,*,#179656,.T.); +#179656 = EDGE_CURVE('',#179617,#179432,#179657,.T.); +#179657 = CIRCLE('',#179658,0.25); +#179658 = AXIS2_PLACEMENT_3D('',#179659,#179660,#179661); +#179659 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.1)); +#179660 = DIRECTION('',(0.,0.,1.)); +#179661 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179662 = ORIENTED_EDGE('',*,*,#179431,.T.); +#179663 = ORIENTED_EDGE('',*,*,#179664,.F.); +#179664 = EDGE_CURVE('',#179609,#179434,#179665,.T.); +#179665 = CIRCLE('',#179666,0.25); +#179666 = AXIS2_PLACEMENT_3D('',#179667,#179668,#179669); +#179667 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.25)); +#179668 = DIRECTION('',(0.,0.,1.)); +#179669 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179670 = ORIENTED_EDGE('',*,*,#179616,.F.); +#179671 = CYLINDRICAL_SURFACE('',#179672,0.25); +#179672 = AXIS2_PLACEMENT_3D('',#179673,#179674,#179675); +#179673 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.)); +#179674 = DIRECTION('',(-0.,-0.,-1.)); +#179675 = DIRECTION('',(1.,0.,0.)); +#179676 = ADVANCED_FACE('',(#179677),#179689,.T.); +#179677 = FACE_BOUND('',#179678,.T.); +#179678 = EDGE_LOOP('',(#179679,#179686,#179687,#179688)); +#179679 = ORIENTED_EDGE('',*,*,#179680,.T.); +#179680 = EDGE_CURVE('',#179432,#179525,#179681,.T.); +#179681 = CIRCLE('',#179682,0.1); +#179682 = AXIS2_PLACEMENT_3D('',#179683,#179684,#179685); +#179683 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.1)); +#179684 = DIRECTION('',(6.123233995737E-17,1.,0.)); +#179685 = DIRECTION('',(1.,-6.123233995737E-17,0.)); +#179686 = ORIENTED_EDGE('',*,*,#179533,.T.); +#179687 = ORIENTED_EDGE('',*,*,#179473,.F.); +#179688 = ORIENTED_EDGE('',*,*,#179448,.F.); +#179689 = CYLINDRICAL_SURFACE('',#179690,0.1); +#179690 = AXIS2_PLACEMENT_3D('',#179691,#179692,#179693); +#179691 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.1)); +#179692 = DIRECTION('',(0.,1.,0.)); +#179693 = DIRECTION('',(1.,0.,0.)); +#179694 = ADVANCED_FACE('',(#179695),#179707,.T.); +#179695 = FACE_BOUND('',#179696,.T.); +#179696 = EDGE_LOOP('',(#179697,#179698,#179699,#179700)); +#179697 = ORIENTED_EDGE('',*,*,#179441,.T.); +#179698 = ORIENTED_EDGE('',*,*,#179488,.T.); +#179699 = ORIENTED_EDGE('',*,*,#179591,.F.); +#179700 = ORIENTED_EDGE('',*,*,#179701,.F.); +#179701 = EDGE_CURVE('',#179434,#179583,#179702,.T.); +#179702 = CIRCLE('',#179703,0.1); +#179703 = AXIS2_PLACEMENT_3D('',#179704,#179705,#179706); +#179704 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.25)); +#179705 = DIRECTION('',(-6.123233995737E-17,-1.,0.)); +#179706 = DIRECTION('',(1.,-6.123233995737E-17,0.)); +#179707 = CYLINDRICAL_SURFACE('',#179708,0.1); +#179708 = AXIS2_PLACEMENT_3D('',#179709,#179710,#179711); +#179709 = CARTESIAN_POINT('',(1.899999999999,-1.75,0.25)); +#179710 = DIRECTION('',(0.,1.,0.)); +#179711 = DIRECTION('',(1.,0.,0.)); +#179712 = ADVANCED_FACE('',(#179713),#179725,.T.); +#179713 = FACE_BOUND('',#179714,.T.); +#179714 = EDGE_LOOP('',(#179715,#179716,#179717,#179724)); +#179715 = ORIENTED_EDGE('',*,*,#179557,.T.); +#179716 = ORIENTED_EDGE('',*,*,#179514,.T.); +#179717 = ORIENTED_EDGE('',*,*,#179718,.F.); +#179718 = EDGE_CURVE('',#179617,#179517,#179719,.T.); +#179719 = CIRCLE('',#179720,0.1); +#179720 = AXIS2_PLACEMENT_3D('',#179721,#179722,#179723); +#179721 = CARTESIAN_POINT('',(1.749999999999,-1.9,0.1)); +#179722 = DIRECTION('',(1.,0.,0.)); +#179723 = DIRECTION('',(0.,-1.,0.)); +#179724 = ORIENTED_EDGE('',*,*,#179624,.F.); +#179725 = CYLINDRICAL_SURFACE('',#179726,0.1); +#179726 = AXIS2_PLACEMENT_3D('',#179727,#179728,#179729); +#179727 = CARTESIAN_POINT('',(0.8,-1.9,0.1)); +#179728 = DIRECTION('',(1.,0.,0.)); +#179729 = DIRECTION('',(0.,-1.,0.)); +#179730 = ADVANCED_FACE('',(#179731),#179737,.T.); +#179731 = FACE_BOUND('',#179732,.T.); +#179732 = EDGE_LOOP('',(#179733,#179734,#179735,#179736)); +#179733 = ORIENTED_EDGE('',*,*,#179524,.T.); +#179734 = ORIENTED_EDGE('',*,*,#179680,.F.); +#179735 = ORIENTED_EDGE('',*,*,#179656,.F.); +#179736 = ORIENTED_EDGE('',*,*,#179718,.T.); +#179737 = TOROIDAL_SURFACE('',#179738,0.15,0.1); +#179738 = AXIS2_PLACEMENT_3D('',#179739,#179740,#179741); +#179739 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.1)); +#179740 = DIRECTION('',(-0.,-0.,-1.)); +#179741 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179742 = ADVANCED_FACE('',(#179743),#179749,.T.); +#179743 = FACE_BOUND('',#179744,.T.); +#179744 = EDGE_LOOP('',(#179745,#179746,#179747,#179748)); +#179745 = ORIENTED_EDGE('',*,*,#179639,.F.); +#179746 = ORIENTED_EDGE('',*,*,#179664,.T.); +#179747 = ORIENTED_EDGE('',*,*,#179701,.T.); +#179748 = ORIENTED_EDGE('',*,*,#179582,.F.); +#179749 = TOROIDAL_SURFACE('',#179750,0.15,0.1); +#179750 = AXIS2_PLACEMENT_3D('',#179751,#179752,#179753); +#179751 = CARTESIAN_POINT('',(1.749999999999,-1.75,0.25)); +#179752 = DIRECTION('',(0.,0.,1.)); +#179753 = DIRECTION('',(-8.881784197001E-16,-1.,0.)); +#179754 = MANIFOLD_SOLID_BREP('',#179755); +#179755 = CLOSED_SHELL('',(#179756,#179798,#179829,#179854,#179903, + #179934,#179959,#179982,#180015,#180040,#180169,#180209,#180225, + #180258,#180418,#180435,#180471,#180502,#180520,#180562,#180592, + #180615,#180651,#180674,#180718,#180742,#180770,#180793,#180823, + #180859,#180889,#180912,#180936,#180969,#181000,#181024,#181042, + #181068,#181093,#181119,#181137,#181162,#181188,#181214,#181239, + #181264,#181290,#181316,#181341,#181366,#181392,#181425,#181450, + #181572,#181588,#181613,#181637,#181654,#181671,#181688,#181719, + #181742,#181765,#181790,#181809,#181821,#181845,#181863,#181887, + #181930,#181954,#181997,#182021,#182046,#182070,#182087,#182104, + #182115,#182150,#182166,#182194,#182210,#182232,#182260,#182282, + #182298,#182320,#182348,#182370,#182386,#182410,#182422)); +#179756 = ADVANCED_FACE('',(#179757),#179793,.T.); +#179757 = FACE_BOUND('',#179758,.T.); +#179758 = EDGE_LOOP('',(#179759,#179770,#179778,#179787)); +#179759 = ORIENTED_EDGE('',*,*,#179760,.T.); +#179760 = EDGE_CURVE('',#179761,#179763,#179765,.T.); +#179761 = VERTEX_POINT('',#179762); +#179762 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179763 = VERTEX_POINT('',#179764); +#179764 = CARTESIAN_POINT('',(-0.8,1.9,1.45)); +#179765 = CIRCLE('',#179766,0.1); +#179766 = AXIS2_PLACEMENT_3D('',#179767,#179768,#179769); +#179767 = CARTESIAN_POINT('',(-0.7,1.9,1.45)); +#179768 = DIRECTION('',(0.,0.,1.)); +#179769 = DIRECTION('',(1.,0.,-0.)); +#179770 = ORIENTED_EDGE('',*,*,#179771,.T.); +#179771 = EDGE_CURVE('',#179763,#179772,#179774,.T.); +#179772 = VERTEX_POINT('',#179773); +#179773 = CARTESIAN_POINT('',(-0.8,1.9,1.705)); +#179774 = LINE('',#179775,#179776); +#179775 = CARTESIAN_POINT('',(-0.8,1.9,1.45)); +#179776 = VECTOR('',#179777,1.); +#179777 = DIRECTION('',(0.,0.,1.)); +#179778 = ORIENTED_EDGE('',*,*,#179779,.T.); +#179779 = EDGE_CURVE('',#179772,#179780,#179782,.T.); +#179780 = VERTEX_POINT('',#179781); +#179781 = CARTESIAN_POINT('',(-0.7,2.,1.705)); +#179782 = CIRCLE('',#179783,0.1); +#179783 = AXIS2_PLACEMENT_3D('',#179784,#179785,#179786); +#179784 = CARTESIAN_POINT('',(-0.7,1.9,1.705)); +#179785 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#179786 = DIRECTION('',(-1.,-1.5407922168E-32,-4.285034420285E-32)); +#179787 = ORIENTED_EDGE('',*,*,#179788,.F.); +#179788 = EDGE_CURVE('',#179761,#179780,#179789,.T.); +#179789 = LINE('',#179790,#179791); +#179790 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179791 = VECTOR('',#179792,1.); +#179792 = DIRECTION('',(0.,0.,1.)); +#179793 = CYLINDRICAL_SURFACE('',#179794,0.1); +#179794 = AXIS2_PLACEMENT_3D('',#179795,#179796,#179797); +#179795 = CARTESIAN_POINT('',(-0.7,1.9,1.45)); +#179796 = DIRECTION('',(-0.,-0.,-1.)); +#179797 = DIRECTION('',(1.,0.,0.)); +#179798 = ADVANCED_FACE('',(#179799),#179824,.T.); +#179799 = FACE_BOUND('',#179800,.T.); +#179800 = EDGE_LOOP('',(#179801,#179802,#179810,#179818)); +#179801 = ORIENTED_EDGE('',*,*,#179788,.T.); +#179802 = ORIENTED_EDGE('',*,*,#179803,.T.); +#179803 = EDGE_CURVE('',#179780,#179804,#179806,.T.); +#179804 = VERTEX_POINT('',#179805); +#179805 = CARTESIAN_POINT('',(0.7,2.,1.705)); +#179806 = LINE('',#179807,#179808); +#179807 = CARTESIAN_POINT('',(-0.7,2.,1.705)); +#179808 = VECTOR('',#179809,1.); +#179809 = DIRECTION('',(1.,-1.586032892322E-16,0.)); +#179810 = ORIENTED_EDGE('',*,*,#179811,.F.); +#179811 = EDGE_CURVE('',#179812,#179804,#179814,.T.); +#179812 = VERTEX_POINT('',#179813); +#179813 = CARTESIAN_POINT('',(0.7,2.,1.45)); +#179814 = LINE('',#179815,#179816); +#179815 = CARTESIAN_POINT('',(0.7,2.,1.45)); +#179816 = VECTOR('',#179817,1.); +#179817 = DIRECTION('',(0.,0.,1.)); +#179818 = ORIENTED_EDGE('',*,*,#179819,.F.); +#179819 = EDGE_CURVE('',#179761,#179812,#179820,.T.); +#179820 = LINE('',#179821,#179822); +#179821 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179822 = VECTOR('',#179823,1.); +#179823 = DIRECTION('',(1.,-1.586032892322E-16,0.)); +#179824 = PLANE('',#179825); +#179825 = AXIS2_PLACEMENT_3D('',#179826,#179827,#179828); +#179826 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179827 = DIRECTION('',(1.586032892322E-16,1.,0.)); +#179828 = DIRECTION('',(1.,-1.586032892322E-16,0.)); +#179829 = ADVANCED_FACE('',(#179830),#179849,.T.); +#179830 = FACE_BOUND('',#179831,.T.); +#179831 = EDGE_LOOP('',(#179832,#179841,#179848)); +#179832 = ORIENTED_EDGE('',*,*,#179833,.F.); +#179833 = EDGE_CURVE('',#179834,#179772,#179836,.T.); +#179834 = VERTEX_POINT('',#179835); +#179835 = CARTESIAN_POINT('',(-0.7,1.9,1.805)); +#179836 = CIRCLE('',#179837,0.1); +#179837 = AXIS2_PLACEMENT_3D('',#179838,#179839,#179840); +#179838 = CARTESIAN_POINT('',(-0.7,1.9,1.705)); +#179839 = DIRECTION('',(-0.,-1.,0.)); +#179840 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#179841 = ORIENTED_EDGE('',*,*,#179842,.T.); +#179842 = EDGE_CURVE('',#179834,#179780,#179843,.T.); +#179843 = CIRCLE('',#179844,0.1); +#179844 = AXIS2_PLACEMENT_3D('',#179845,#179846,#179847); +#179845 = CARTESIAN_POINT('',(-0.7,1.9,1.705)); +#179846 = DIRECTION('',(-1.,1.608122649677E-16,-4.285034420285E-32)); +#179847 = DIRECTION('',(1.608122649677E-16,1.,-1.5407922168E-32)); +#179848 = ORIENTED_EDGE('',*,*,#179779,.F.); +#179849 = SPHERICAL_SURFACE('',#179850,0.1); +#179850 = AXIS2_PLACEMENT_3D('',#179851,#179852,#179853); +#179851 = CARTESIAN_POINT('',(-0.7,1.9,1.705)); +#179852 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#179853 = DIRECTION('',(-1.,-1.5407922168E-32,-4.285034420285E-32)); +#179854 = ADVANCED_FACE('',(#179855),#179886,.F.); +#179855 = FACE_BOUND('',#179856,.F.); +#179856 = EDGE_LOOP('',(#179857,#179867,#179875,#179880,#179881)); +#179857 = ORIENTED_EDGE('',*,*,#179858,.T.); +#179858 = EDGE_CURVE('',#179859,#179861,#179863,.T.); +#179859 = VERTEX_POINT('',#179860); +#179860 = CARTESIAN_POINT('',(-0.842105263158,2.,0.35)); +#179861 = VERTEX_POINT('',#179862); +#179862 = CARTESIAN_POINT('',(-0.8,2.,0.35)); +#179863 = LINE('',#179864,#179865); +#179864 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#179865 = VECTOR('',#179866,1.); +#179866 = DIRECTION('',(1.,0.,0.)); +#179867 = ORIENTED_EDGE('',*,*,#179868,.T.); +#179868 = EDGE_CURVE('',#179861,#179869,#179871,.T.); +#179869 = VERTEX_POINT('',#179870); +#179870 = CARTESIAN_POINT('',(-0.7,2.,0.35)); +#179871 = LINE('',#179872,#179873); +#179872 = CARTESIAN_POINT('',(-0.8,2.,0.35)); +#179873 = VECTOR('',#179874,1.); +#179874 = DIRECTION('',(1.,0.,0.)); +#179875 = ORIENTED_EDGE('',*,*,#179876,.T.); +#179876 = EDGE_CURVE('',#179869,#179761,#179877,.T.); +#179877 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#179878,#179879), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#179878 = CARTESIAN_POINT('',(-0.7,2.,0.35)); +#179879 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179880 = ORIENTED_EDGE('',*,*,#179760,.T.); +#179881 = ORIENTED_EDGE('',*,*,#179882,.F.); +#179882 = EDGE_CURVE('',#179859,#179763,#179883,.T.); +#179883 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#179884,#179885), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#179884 = CARTESIAN_POINT('',(-0.842105263158,2.,0.35)); +#179885 = CARTESIAN_POINT('',(-0.8,1.9,1.45)); +#179886 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#179887,#179888) + ,(#179889,#179890) + ,(#179891,#179892) + ,(#179893,#179894) + ,(#179895,#179896) + ,(#179897,#179898) + ,(#179899,#179900) + ,(#179901,#179902 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(3.14159265359, + 4.712388980385),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#179887 = CARTESIAN_POINT('',(-0.842105263158,2.,0.35)); +#179888 = CARTESIAN_POINT('',(-0.8,1.9,1.45)); +#179889 = CARTESIAN_POINT('',(-0.821804511278,2.,0.35)); +#179890 = CARTESIAN_POINT('',(-0.8,1.922439947526,1.45)); +#179891 = CARTESIAN_POINT('',(-0.801503759398,2.,0.35)); +#179892 = CARTESIAN_POINT('',(-0.794125111345,1.944879786498,1.45)); +#179893 = CARTESIAN_POINT('',(-0.781203007519,2.,0.35)); +#179894 = CARTESIAN_POINT('',(-0.78237627222,1.965474694082,1.45)); +#179895 = CARTESIAN_POINT('',(-0.760902255639,2.,0.35)); +#179896 = CARTESIAN_POINT('',(-0.765474694082,1.98237627222,1.45)); +#179897 = CARTESIAN_POINT('',(-0.740601503759,2.,0.35)); +#179898 = CARTESIAN_POINT('',(-0.744879786498,1.994125111345,1.45)); +#179899 = CARTESIAN_POINT('',(-0.72030075188,2.,0.35)); +#179900 = CARTESIAN_POINT('',(-0.722439947526,2.,1.45)); +#179901 = CARTESIAN_POINT('',(-0.7,2.,0.35)); +#179902 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179903 = ADVANCED_FACE('',(#179904),#179929,.T.); +#179904 = FACE_BOUND('',#179905,.T.); +#179905 = EDGE_LOOP('',(#179906,#179916,#179922,#179923)); +#179906 = ORIENTED_EDGE('',*,*,#179907,.T.); +#179907 = EDGE_CURVE('',#179908,#179910,#179912,.T.); +#179908 = VERTEX_POINT('',#179909); +#179909 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#179910 = VERTEX_POINT('',#179911); +#179911 = CARTESIAN_POINT('',(-0.8,1.85,1.705)); +#179912 = LINE('',#179913,#179914); +#179913 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#179914 = VECTOR('',#179915,1.); +#179915 = DIRECTION('',(0.,0.,1.)); +#179916 = ORIENTED_EDGE('',*,*,#179917,.T.); +#179917 = EDGE_CURVE('',#179910,#179772,#179918,.T.); +#179918 = LINE('',#179919,#179920); +#179919 = CARTESIAN_POINT('',(-0.8,1.85,1.705)); +#179920 = VECTOR('',#179921,1.); +#179921 = DIRECTION('',(0.,1.,0.)); +#179922 = ORIENTED_EDGE('',*,*,#179771,.F.); +#179923 = ORIENTED_EDGE('',*,*,#179924,.F.); +#179924 = EDGE_CURVE('',#179908,#179763,#179925,.T.); +#179925 = LINE('',#179926,#179927); +#179926 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#179927 = VECTOR('',#179928,1.); +#179928 = DIRECTION('',(0.,1.,0.)); +#179929 = PLANE('',#179930); +#179930 = AXIS2_PLACEMENT_3D('',#179931,#179932,#179933); +#179931 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#179932 = DIRECTION('',(-1.,0.,0.)); +#179933 = DIRECTION('',(0.,1.,0.)); +#179934 = ADVANCED_FACE('',(#179935),#179954,.T.); +#179935 = FACE_BOUND('',#179936,.T.); +#179936 = EDGE_LOOP('',(#179937,#179945,#179952,#179953)); +#179937 = ORIENTED_EDGE('',*,*,#179938,.T.); +#179938 = EDGE_CURVE('',#179834,#179939,#179941,.T.); +#179939 = VERTEX_POINT('',#179940); +#179940 = CARTESIAN_POINT('',(0.7,1.9,1.805)); +#179941 = LINE('',#179942,#179943); +#179942 = CARTESIAN_POINT('',(-0.7,1.9,1.805)); +#179943 = VECTOR('',#179944,1.); +#179944 = DIRECTION('',(1.,-1.586032892322E-16,0.)); +#179945 = ORIENTED_EDGE('',*,*,#179946,.T.); +#179946 = EDGE_CURVE('',#179939,#179804,#179947,.T.); +#179947 = CIRCLE('',#179948,0.1); +#179948 = AXIS2_PLACEMENT_3D('',#179949,#179950,#179951); +#179949 = CARTESIAN_POINT('',(0.7,1.9,1.705)); +#179950 = DIRECTION('',(-1.,1.586032892322E-16,0.)); +#179951 = DIRECTION('',(2.443747136079E-48,1.5407922168E-32,1.)); +#179952 = ORIENTED_EDGE('',*,*,#179803,.F.); +#179953 = ORIENTED_EDGE('',*,*,#179842,.F.); +#179954 = CYLINDRICAL_SURFACE('',#179955,0.1); +#179955 = AXIS2_PLACEMENT_3D('',#179956,#179957,#179958); +#179956 = CARTESIAN_POINT('',(-0.7,1.9,1.705)); +#179957 = DIRECTION('',(1.,-1.586032892322E-16,0.)); +#179958 = DIRECTION('',(2.443747136079E-48,1.5407922168E-32,1.)); +#179959 = ADVANCED_FACE('',(#179960),#179977,.F.); +#179960 = FACE_BOUND('',#179961,.F.); +#179961 = EDGE_LOOP('',(#179962,#179970,#179975,#179976)); +#179962 = ORIENTED_EDGE('',*,*,#179963,.T.); +#179963 = EDGE_CURVE('',#179869,#179964,#179966,.T.); +#179964 = VERTEX_POINT('',#179965); +#179965 = CARTESIAN_POINT('',(0.7,2.,0.35)); +#179966 = LINE('',#179967,#179968); +#179967 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#179968 = VECTOR('',#179969,1.); +#179969 = DIRECTION('',(1.,0.,0.)); +#179970 = ORIENTED_EDGE('',*,*,#179971,.T.); +#179971 = EDGE_CURVE('',#179964,#179812,#179972,.T.); +#179972 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#179973,#179974), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#179973 = CARTESIAN_POINT('',(0.7,2.,0.35)); +#179974 = CARTESIAN_POINT('',(0.7,2.,1.45)); +#179975 = ORIENTED_EDGE('',*,*,#179819,.F.); +#179976 = ORIENTED_EDGE('',*,*,#179876,.F.); +#179977 = PLANE('',#179978); +#179978 = AXIS2_PLACEMENT_3D('',#179979,#179980,#179981); +#179979 = CARTESIAN_POINT('',(-0.7,2.,1.45)); +#179980 = DIRECTION('',(-1.586032892322E-16,-1.,1.513940488125E-16)); +#179981 = DIRECTION('',(1.,-1.586032892322E-16,-7.421918064987E-58)); +#179982 = ADVANCED_FACE('',(#179983),#180010,.T.); +#179983 = FACE_BOUND('',#179984,.T.); +#179984 = EDGE_LOOP('',(#179985,#179994,#179995,#180004)); +#179985 = ORIENTED_EDGE('',*,*,#179986,.T.); +#179986 = EDGE_CURVE('',#179987,#179812,#179989,.T.); +#179987 = VERTEX_POINT('',#179988); +#179988 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#179989 = CIRCLE('',#179990,0.1); +#179990 = AXIS2_PLACEMENT_3D('',#179991,#179992,#179993); +#179991 = CARTESIAN_POINT('',(0.7,1.9,1.45)); +#179992 = DIRECTION('',(0.,0.,1.)); +#179993 = DIRECTION('',(1.,0.,-0.)); +#179994 = ORIENTED_EDGE('',*,*,#179811,.T.); +#179995 = ORIENTED_EDGE('',*,*,#179996,.T.); +#179996 = EDGE_CURVE('',#179804,#179997,#179999,.T.); +#179997 = VERTEX_POINT('',#179998); +#179998 = CARTESIAN_POINT('',(0.8,1.9,1.705)); +#179999 = CIRCLE('',#180000,0.1); +#180000 = AXIS2_PLACEMENT_3D('',#180001,#180002,#180003); +#180001 = CARTESIAN_POINT('',(0.7,1.9,1.705)); +#180002 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180003 = DIRECTION('',(4.285034420285E-32,1.,-1.5407922168E-32)); +#180004 = ORIENTED_EDGE('',*,*,#180005,.F.); +#180005 = EDGE_CURVE('',#179987,#179997,#180006,.T.); +#180006 = LINE('',#180007,#180008); +#180007 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#180008 = VECTOR('',#180009,1.); +#180009 = DIRECTION('',(0.,0.,1.)); +#180010 = CYLINDRICAL_SURFACE('',#180011,0.1); +#180011 = AXIS2_PLACEMENT_3D('',#180012,#180013,#180014); +#180012 = CARTESIAN_POINT('',(0.7,1.9,1.45)); +#180013 = DIRECTION('',(-0.,-0.,-1.)); +#180014 = DIRECTION('',(1.,0.,0.)); +#180015 = ADVANCED_FACE('',(#180016),#180035,.T.); +#180016 = FACE_BOUND('',#180017,.T.); +#180017 = EDGE_LOOP('',(#180018,#180026,#180027,#180028)); +#180018 = ORIENTED_EDGE('',*,*,#180019,.T.); +#180019 = EDGE_CURVE('',#180020,#179834,#180022,.T.); +#180020 = VERTEX_POINT('',#180021); +#180021 = CARTESIAN_POINT('',(-0.7,1.85,1.805)); +#180022 = LINE('',#180023,#180024); +#180023 = CARTESIAN_POINT('',(-0.7,1.85,1.805)); +#180024 = VECTOR('',#180025,1.); +#180025 = DIRECTION('',(0.,1.,0.)); +#180026 = ORIENTED_EDGE('',*,*,#179833,.T.); +#180027 = ORIENTED_EDGE('',*,*,#179917,.F.); +#180028 = ORIENTED_EDGE('',*,*,#180029,.F.); +#180029 = EDGE_CURVE('',#180020,#179910,#180030,.T.); +#180030 = CIRCLE('',#180031,0.1); +#180031 = AXIS2_PLACEMENT_3D('',#180032,#180033,#180034); +#180032 = CARTESIAN_POINT('',(-0.7,1.85,1.705)); +#180033 = DIRECTION('',(-6.123233995737E-17,-1.,1.5407922168E-32)); +#180034 = DIRECTION('',(1.,-6.123233995737E-17,4.285034420285E-32)); +#180035 = CYLINDRICAL_SURFACE('',#180036,0.1); +#180036 = AXIS2_PLACEMENT_3D('',#180037,#180038,#180039); +#180037 = CARTESIAN_POINT('',(-0.7,1.85,1.705)); +#180038 = DIRECTION('',(0.,1.,0.)); +#180039 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#180040 = ADVANCED_FACE('',(#180041),#180164,.T.); +#180041 = FACE_BOUND('',#180042,.T.); +#180042 = EDGE_LOOP('',(#180043,#180054,#180062,#180070,#180078,#180087, + #180095,#180103,#180111,#180117,#180118,#180126,#180134,#180142, + #180150,#180158)); +#180043 = ORIENTED_EDGE('',*,*,#180044,.F.); +#180044 = EDGE_CURVE('',#180045,#180047,#180049,.T.); +#180045 = VERTEX_POINT('',#180046); +#180046 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180047 = VERTEX_POINT('',#180048); +#180048 = CARTESIAN_POINT('',(-1.75,-2.,0.35)); +#180049 = CIRCLE('',#180050,0.25); +#180050 = AXIS2_PLACEMENT_3D('',#180051,#180052,#180053); +#180051 = CARTESIAN_POINT('',(-1.75,-1.75,0.35)); +#180052 = DIRECTION('',(0.,0.,1.)); +#180053 = DIRECTION('',(1.,0.,-0.)); +#180054 = ORIENTED_EDGE('',*,*,#180055,.T.); +#180055 = EDGE_CURVE('',#180045,#180056,#180058,.T.); +#180056 = VERTEX_POINT('',#180057); +#180057 = CARTESIAN_POINT('',(-2.,-1.714285714286,0.35)); +#180058 = LINE('',#180059,#180060); +#180059 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180060 = VECTOR('',#180061,1.); +#180061 = DIRECTION('',(0.,1.,0.)); +#180062 = ORIENTED_EDGE('',*,*,#180063,.T.); +#180063 = EDGE_CURVE('',#180056,#180064,#180066,.T.); +#180064 = VERTEX_POINT('',#180065); +#180065 = CARTESIAN_POINT('',(-2.,1.714285714286,0.35)); +#180066 = LINE('',#180067,#180068); +#180067 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180068 = VECTOR('',#180069,1.); +#180069 = DIRECTION('',(0.,1.,0.)); +#180070 = ORIENTED_EDGE('',*,*,#180071,.T.); +#180071 = EDGE_CURVE('',#180064,#180072,#180074,.T.); +#180072 = VERTEX_POINT('',#180073); +#180073 = CARTESIAN_POINT('',(-2.,1.75,0.35)); +#180074 = LINE('',#180075,#180076); +#180075 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180076 = VECTOR('',#180077,1.); +#180077 = DIRECTION('',(0.,1.,0.)); +#180078 = ORIENTED_EDGE('',*,*,#180079,.F.); +#180079 = EDGE_CURVE('',#180080,#180072,#180082,.T.); +#180080 = VERTEX_POINT('',#180081); +#180081 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180082 = CIRCLE('',#180083,0.25); +#180083 = AXIS2_PLACEMENT_3D('',#180084,#180085,#180086); +#180084 = CARTESIAN_POINT('',(-1.75,1.75,0.35)); +#180085 = DIRECTION('',(0.,0.,1.)); +#180086 = DIRECTION('',(1.,0.,-0.)); +#180087 = ORIENTED_EDGE('',*,*,#180088,.T.); +#180088 = EDGE_CURVE('',#180080,#180089,#180091,.T.); +#180089 = VERTEX_POINT('',#180090); +#180090 = CARTESIAN_POINT('',(-1.714285714286,2.,0.35)); +#180091 = LINE('',#180092,#180093); +#180092 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180093 = VECTOR('',#180094,1.); +#180094 = DIRECTION('',(1.,0.,0.)); +#180095 = ORIENTED_EDGE('',*,*,#180096,.T.); +#180096 = EDGE_CURVE('',#180089,#180097,#180099,.T.); +#180097 = VERTEX_POINT('',#180098); +#180098 = CARTESIAN_POINT('',(-1.028571428571,2.,0.35)); +#180099 = LINE('',#180100,#180101); +#180100 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180101 = VECTOR('',#180102,1.); +#180102 = DIRECTION('',(1.,0.,0.)); +#180103 = ORIENTED_EDGE('',*,*,#180104,.T.); +#180104 = EDGE_CURVE('',#180097,#180105,#180107,.T.); +#180105 = VERTEX_POINT('',#180106); +#180106 = CARTESIAN_POINT('',(-0.864864864865,2.,0.35)); +#180107 = LINE('',#180108,#180109); +#180108 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180109 = VECTOR('',#180110,1.); +#180110 = DIRECTION('',(1.,0.,0.)); +#180111 = ORIENTED_EDGE('',*,*,#180112,.T.); +#180112 = EDGE_CURVE('',#180105,#179859,#180113,.T.); +#180113 = LINE('',#180114,#180115); +#180114 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180115 = VECTOR('',#180116,1.); +#180116 = DIRECTION('',(1.,0.,0.)); +#180117 = ORIENTED_EDGE('',*,*,#179858,.T.); +#180118 = ORIENTED_EDGE('',*,*,#180119,.F.); +#180119 = EDGE_CURVE('',#180120,#179861,#180122,.T.); +#180120 = VERTEX_POINT('',#180121); +#180121 = CARTESIAN_POINT('',(-0.8,-2.,0.35)); +#180122 = LINE('',#180123,#180124); +#180123 = CARTESIAN_POINT('',(-0.8,-2.,0.35)); +#180124 = VECTOR('',#180125,1.); +#180125 = DIRECTION('',(0.,1.,0.)); +#180126 = ORIENTED_EDGE('',*,*,#180127,.T.); +#180127 = EDGE_CURVE('',#180120,#180128,#180130,.T.); +#180128 = VERTEX_POINT('',#180129); +#180129 = CARTESIAN_POINT('',(-0.842105263158,-2.,0.35)); +#180130 = LINE('',#180131,#180132); +#180131 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#180132 = VECTOR('',#180133,1.); +#180133 = DIRECTION('',(-1.,0.,0.)); +#180134 = ORIENTED_EDGE('',*,*,#180135,.T.); +#180135 = EDGE_CURVE('',#180128,#180136,#180138,.T.); +#180136 = VERTEX_POINT('',#180137); +#180137 = CARTESIAN_POINT('',(-0.864864864865,-2.,0.35)); +#180138 = LINE('',#180139,#180140); +#180139 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#180140 = VECTOR('',#180141,1.); +#180141 = DIRECTION('',(-1.,0.,0.)); +#180142 = ORIENTED_EDGE('',*,*,#180143,.T.); +#180143 = EDGE_CURVE('',#180136,#180144,#180146,.T.); +#180144 = VERTEX_POINT('',#180145); +#180145 = CARTESIAN_POINT('',(-1.028571428571,-2.,0.35)); +#180146 = LINE('',#180147,#180148); +#180147 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#180148 = VECTOR('',#180149,1.); +#180149 = DIRECTION('',(-1.,0.,0.)); +#180150 = ORIENTED_EDGE('',*,*,#180151,.T.); +#180151 = EDGE_CURVE('',#180144,#180152,#180154,.T.); +#180152 = VERTEX_POINT('',#180153); +#180153 = CARTESIAN_POINT('',(-1.714285714286,-2.,0.35)); +#180154 = LINE('',#180155,#180156); +#180155 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#180156 = VECTOR('',#180157,1.); +#180157 = DIRECTION('',(-1.,0.,0.)); +#180158 = ORIENTED_EDGE('',*,*,#180159,.T.); +#180159 = EDGE_CURVE('',#180152,#180047,#180160,.T.); +#180160 = LINE('',#180161,#180162); +#180161 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#180162 = VECTOR('',#180163,1.); +#180163 = DIRECTION('',(-1.,0.,0.)); +#180164 = PLANE('',#180165); +#180165 = AXIS2_PLACEMENT_3D('',#180166,#180167,#180168); +#180166 = CARTESIAN_POINT('',(-1.873819522781E-16,-1.606131019526E-17, + 0.35)); +#180167 = DIRECTION('',(-2.985720343766E-33,-4.405161162934E-34,-1.)); +#180168 = DIRECTION('',(-1.,0.,2.985720343766E-33)); +#180169 = ADVANCED_FACE('',(#180170),#180204,.T.); +#180170 = FACE_BOUND('',#180171,.T.); +#180171 = EDGE_LOOP('',(#180172,#180180,#180181,#180182,#180190,#180198) + ); +#180172 = ORIENTED_EDGE('',*,*,#180173,.T.); +#180173 = EDGE_CURVE('',#180174,#179861,#180176,.T.); +#180174 = VERTEX_POINT('',#180175); +#180175 = CARTESIAN_POINT('',(-0.8,2.,0.1)); +#180176 = LINE('',#180177,#180178); +#180177 = CARTESIAN_POINT('',(-0.8,2.,0.)); +#180178 = VECTOR('',#180179,1.); +#180179 = DIRECTION('',(0.,0.,1.)); +#180180 = ORIENTED_EDGE('',*,*,#179868,.T.); +#180181 = ORIENTED_EDGE('',*,*,#179963,.T.); +#180182 = ORIENTED_EDGE('',*,*,#180183,.T.); +#180183 = EDGE_CURVE('',#179964,#180184,#180186,.T.); +#180184 = VERTEX_POINT('',#180185); +#180185 = CARTESIAN_POINT('',(0.8,2.,0.35)); +#180186 = LINE('',#180187,#180188); +#180187 = CARTESIAN_POINT('',(-0.8,2.,0.35)); +#180188 = VECTOR('',#180189,1.); +#180189 = DIRECTION('',(1.,0.,0.)); +#180190 = ORIENTED_EDGE('',*,*,#180191,.F.); +#180191 = EDGE_CURVE('',#180192,#180184,#180194,.T.); +#180192 = VERTEX_POINT('',#180193); +#180193 = CARTESIAN_POINT('',(0.8,2.,0.1)); +#180194 = LINE('',#180195,#180196); +#180195 = CARTESIAN_POINT('',(0.8,2.,0.)); +#180196 = VECTOR('',#180197,1.); +#180197 = DIRECTION('',(0.,0.,1.)); +#180198 = ORIENTED_EDGE('',*,*,#180199,.F.); +#180199 = EDGE_CURVE('',#180174,#180192,#180200,.T.); +#180200 = LINE('',#180201,#180202); +#180201 = CARTESIAN_POINT('',(-0.8,2.,0.1)); +#180202 = VECTOR('',#180203,1.); +#180203 = DIRECTION('',(1.,0.,0.)); +#180204 = PLANE('',#180205); +#180205 = AXIS2_PLACEMENT_3D('',#180206,#180207,#180208); +#180206 = CARTESIAN_POINT('',(-0.8,2.,0.)); +#180207 = DIRECTION('',(0.,1.,0.)); +#180208 = DIRECTION('',(1.,0.,0.)); +#180209 = ADVANCED_FACE('',(#180210),#180220,.F.); +#180210 = FACE_BOUND('',#180211,.F.); +#180211 = EDGE_LOOP('',(#180212,#180213,#180214,#180215)); +#180212 = ORIENTED_EDGE('',*,*,#180112,.T.); +#180213 = ORIENTED_EDGE('',*,*,#179882,.T.); +#180214 = ORIENTED_EDGE('',*,*,#179924,.F.); +#180215 = ORIENTED_EDGE('',*,*,#180216,.F.); +#180216 = EDGE_CURVE('',#180105,#179908,#180217,.T.); +#180217 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180218,#180219), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180218 = CARTESIAN_POINT('',(-0.864864864865,2.,0.35)); +#180219 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#180220 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#180221,#180222) + ,(#180223,#180224 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.E-02),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#180221 = CARTESIAN_POINT('',(-0.864864864865,2.,0.35)); +#180222 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#180223 = CARTESIAN_POINT('',(-0.842105263158,2.,0.35)); +#180224 = CARTESIAN_POINT('',(-0.8,1.9,1.45)); +#180225 = ADVANCED_FACE('',(#180226),#180253,.F.); +#180226 = FACE_BOUND('',#180227,.F.); +#180227 = EDGE_LOOP('',(#180228,#180237,#180238,#180247)); +#180228 = ORIENTED_EDGE('',*,*,#180229,.T.); +#180229 = EDGE_CURVE('',#180230,#179908,#180232,.T.); +#180230 = VERTEX_POINT('',#180231); +#180231 = CARTESIAN_POINT('',(-0.9,1.75,1.45)); +#180232 = CIRCLE('',#180233,0.1); +#180233 = AXIS2_PLACEMENT_3D('',#180234,#180235,#180236); +#180234 = CARTESIAN_POINT('',(-0.9,1.85,1.45)); +#180235 = DIRECTION('',(0.,0.,1.)); +#180236 = DIRECTION('',(1.,0.,-0.)); +#180237 = ORIENTED_EDGE('',*,*,#179907,.T.); +#180238 = ORIENTED_EDGE('',*,*,#180239,.F.); +#180239 = EDGE_CURVE('',#180240,#179910,#180242,.T.); +#180240 = VERTEX_POINT('',#180241); +#180241 = CARTESIAN_POINT('',(-0.9,1.75,1.705)); +#180242 = CIRCLE('',#180243,0.1); +#180243 = AXIS2_PLACEMENT_3D('',#180244,#180245,#180246); +#180244 = CARTESIAN_POINT('',(-0.9,1.85,1.705)); +#180245 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180246 = DIRECTION('',(4.285034420285E-32,-1.,1.5407922168E-32)); +#180247 = ORIENTED_EDGE('',*,*,#180248,.F.); +#180248 = EDGE_CURVE('',#180230,#180240,#180249,.T.); +#180249 = LINE('',#180250,#180251); +#180250 = CARTESIAN_POINT('',(-0.9,1.75,1.45)); +#180251 = VECTOR('',#180252,1.); +#180252 = DIRECTION('',(0.,0.,1.)); +#180253 = CYLINDRICAL_SURFACE('',#180254,0.1); +#180254 = AXIS2_PLACEMENT_3D('',#180255,#180256,#180257); +#180255 = CARTESIAN_POINT('',(-0.9,1.85,1.45)); +#180256 = DIRECTION('',(-0.,-0.,-1.)); +#180257 = DIRECTION('',(1.,0.,0.)); +#180258 = ADVANCED_FACE('',(#180259),#180413,.F.); +#180259 = FACE_BOUND('',#180260,.F.); +#180260 = EDGE_LOOP('',(#180261,#180269,#180278,#180286,#180295,#180303, + #180312,#180320,#180329,#180337,#180345,#180353,#180362,#180370, + #180379,#180387,#180396,#180404,#180411,#180412)); +#180261 = ORIENTED_EDGE('',*,*,#180262,.T.); +#180262 = EDGE_CURVE('',#179939,#180263,#180265,.T.); +#180263 = VERTEX_POINT('',#180264); +#180264 = CARTESIAN_POINT('',(0.7,1.85,1.805)); +#180265 = LINE('',#180266,#180267); +#180266 = CARTESIAN_POINT('',(0.7,1.9,1.805)); +#180267 = VECTOR('',#180268,1.); +#180268 = DIRECTION('',(0.,-1.,0.)); +#180269 = ORIENTED_EDGE('',*,*,#180270,.T.); +#180270 = EDGE_CURVE('',#180263,#180271,#180273,.T.); +#180271 = VERTEX_POINT('',#180272); +#180272 = CARTESIAN_POINT('',(0.9,1.65,1.805)); +#180273 = CIRCLE('',#180274,0.2); +#180274 = AXIS2_PLACEMENT_3D('',#180275,#180276,#180277); +#180275 = CARTESIAN_POINT('',(0.9,1.85,1.805)); +#180276 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180277 = DIRECTION('',(-1.,-1.5407922168E-32,-4.285034420285E-32)); +#180278 = ORIENTED_EDGE('',*,*,#180279,.T.); +#180279 = EDGE_CURVE('',#180271,#180280,#180282,.T.); +#180280 = VERTEX_POINT('',#180281); +#180281 = CARTESIAN_POINT('',(1.5,1.65,1.805)); +#180282 = LINE('',#180283,#180284); +#180283 = CARTESIAN_POINT('',(0.9,1.65,1.805)); +#180284 = VECTOR('',#180285,1.); +#180285 = DIRECTION('',(1.,0.,0.)); +#180286 = ORIENTED_EDGE('',*,*,#180287,.T.); +#180287 = EDGE_CURVE('',#180280,#180288,#180290,.T.); +#180288 = VERTEX_POINT('',#180289); +#180289 = CARTESIAN_POINT('',(1.65,1.5,1.805)); +#180290 = CIRCLE('',#180291,0.15); +#180291 = AXIS2_PLACEMENT_3D('',#180292,#180293,#180294); +#180292 = CARTESIAN_POINT('',(1.5,1.5,1.805)); +#180293 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180294 = DIRECTION('',(1.714013768114E-32,1.,-1.5407922168E-32)); +#180295 = ORIENTED_EDGE('',*,*,#180296,.T.); +#180296 = EDGE_CURVE('',#180288,#180297,#180299,.T.); +#180297 = VERTEX_POINT('',#180298); +#180298 = CARTESIAN_POINT('',(1.65,-1.5,1.805)); +#180299 = LINE('',#180300,#180301); +#180300 = CARTESIAN_POINT('',(1.65,1.5,1.805)); +#180301 = VECTOR('',#180302,1.); +#180302 = DIRECTION('',(0.,-1.,0.)); +#180303 = ORIENTED_EDGE('',*,*,#180304,.T.); +#180304 = EDGE_CURVE('',#180297,#180305,#180307,.T.); +#180305 = VERTEX_POINT('',#180306); +#180306 = CARTESIAN_POINT('',(1.5,-1.65,1.805)); +#180307 = CIRCLE('',#180308,0.15); +#180308 = AXIS2_PLACEMENT_3D('',#180309,#180310,#180311); +#180309 = CARTESIAN_POINT('',(1.5,-1.5,1.805)); +#180310 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180311 = DIRECTION('',(1.,-6.163168867198E-33,4.285034420285E-32)); +#180312 = ORIENTED_EDGE('',*,*,#180313,.T.); +#180313 = EDGE_CURVE('',#180305,#180314,#180316,.T.); +#180314 = VERTEX_POINT('',#180315); +#180315 = CARTESIAN_POINT('',(0.9,-1.65,1.805)); +#180316 = LINE('',#180317,#180318); +#180317 = CARTESIAN_POINT('',(1.5,-1.65,1.805)); +#180318 = VECTOR('',#180319,1.); +#180319 = DIRECTION('',(-1.,-0.,-0.)); +#180320 = ORIENTED_EDGE('',*,*,#180321,.T.); +#180321 = EDGE_CURVE('',#180314,#180322,#180324,.T.); +#180322 = VERTEX_POINT('',#180323); +#180323 = CARTESIAN_POINT('',(0.7,-1.85,1.805)); +#180324 = CIRCLE('',#180325,0.2); +#180325 = AXIS2_PLACEMENT_3D('',#180326,#180327,#180328); +#180326 = CARTESIAN_POINT('',(0.9,-1.85,1.805)); +#180327 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180328 = DIRECTION('',(4.285034420285E-32,1.,-1.5407922168E-32)); +#180329 = ORIENTED_EDGE('',*,*,#180330,.T.); +#180330 = EDGE_CURVE('',#180322,#180331,#180333,.T.); +#180331 = VERTEX_POINT('',#180332); +#180332 = CARTESIAN_POINT('',(0.7,-1.9,1.805)); +#180333 = LINE('',#180334,#180335); +#180334 = CARTESIAN_POINT('',(0.7,-1.85,1.805)); +#180335 = VECTOR('',#180336,1.); +#180336 = DIRECTION('',(-0.,-1.,-0.)); +#180337 = ORIENTED_EDGE('',*,*,#180338,.T.); +#180338 = EDGE_CURVE('',#180331,#180339,#180341,.T.); +#180339 = VERTEX_POINT('',#180340); +#180340 = CARTESIAN_POINT('',(-0.7,-1.9,1.805)); +#180341 = LINE('',#180342,#180343); +#180342 = CARTESIAN_POINT('',(0.7,-1.9,1.805)); +#180343 = VECTOR('',#180344,1.); +#180344 = DIRECTION('',(-1.,-0.,-0.)); +#180345 = ORIENTED_EDGE('',*,*,#180346,.T.); +#180346 = EDGE_CURVE('',#180339,#180347,#180349,.T.); +#180347 = VERTEX_POINT('',#180348); +#180348 = CARTESIAN_POINT('',(-0.7,-1.85,1.805)); +#180349 = LINE('',#180350,#180351); +#180350 = CARTESIAN_POINT('',(-0.7,-1.9,1.805)); +#180351 = VECTOR('',#180352,1.); +#180352 = DIRECTION('',(0.,1.,0.)); +#180353 = ORIENTED_EDGE('',*,*,#180354,.T.); +#180354 = EDGE_CURVE('',#180347,#180355,#180357,.T.); +#180355 = VERTEX_POINT('',#180356); +#180356 = CARTESIAN_POINT('',(-0.9,-1.65,1.805)); +#180357 = CIRCLE('',#180358,0.2); +#180358 = AXIS2_PLACEMENT_3D('',#180359,#180360,#180361); +#180359 = CARTESIAN_POINT('',(-0.9,-1.85,1.805)); +#180360 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180361 = DIRECTION('',(1.,-1.5407922168E-32,4.285034420285E-32)); +#180362 = ORIENTED_EDGE('',*,*,#180363,.T.); +#180363 = EDGE_CURVE('',#180355,#180364,#180366,.T.); +#180364 = VERTEX_POINT('',#180365); +#180365 = CARTESIAN_POINT('',(-1.5,-1.65,1.805)); +#180366 = LINE('',#180367,#180368); +#180367 = CARTESIAN_POINT('',(-0.9,-1.65,1.805)); +#180368 = VECTOR('',#180369,1.); +#180369 = DIRECTION('',(-1.,-0.,-0.)); +#180370 = ORIENTED_EDGE('',*,*,#180371,.T.); +#180371 = EDGE_CURVE('',#180364,#180372,#180374,.T.); +#180372 = VERTEX_POINT('',#180373); +#180373 = CARTESIAN_POINT('',(-1.65,-1.5,1.805)); +#180374 = CIRCLE('',#180375,0.15); +#180375 = AXIS2_PLACEMENT_3D('',#180376,#180377,#180378); +#180376 = CARTESIAN_POINT('',(-1.5,-1.5,1.805)); +#180377 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180378 = DIRECTION('',(1.714013768114E-32,-1.,1.5407922168E-32)); +#180379 = ORIENTED_EDGE('',*,*,#180380,.T.); +#180380 = EDGE_CURVE('',#180372,#180381,#180383,.T.); +#180381 = VERTEX_POINT('',#180382); +#180382 = CARTESIAN_POINT('',(-1.65,1.5,1.805)); +#180383 = LINE('',#180384,#180385); +#180384 = CARTESIAN_POINT('',(-1.65,-1.5,1.805)); +#180385 = VECTOR('',#180386,1.); +#180386 = DIRECTION('',(0.,1.,0.)); +#180387 = ORIENTED_EDGE('',*,*,#180388,.T.); +#180388 = EDGE_CURVE('',#180381,#180389,#180391,.T.); +#180389 = VERTEX_POINT('',#180390); +#180390 = CARTESIAN_POINT('',(-1.5,1.65,1.805)); +#180391 = CIRCLE('',#180392,0.15); +#180392 = AXIS2_PLACEMENT_3D('',#180393,#180394,#180395); +#180393 = CARTESIAN_POINT('',(-1.5,1.5,1.805)); +#180394 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180395 = DIRECTION('',(-1.,-6.163168867199E-33,-4.285034420285E-32)); +#180396 = ORIENTED_EDGE('',*,*,#180397,.T.); +#180397 = EDGE_CURVE('',#180389,#180398,#180400,.T.); +#180398 = VERTEX_POINT('',#180399); +#180399 = CARTESIAN_POINT('',(-0.9,1.65,1.805)); +#180400 = LINE('',#180401,#180402); +#180401 = CARTESIAN_POINT('',(-1.5,1.65,1.805)); +#180402 = VECTOR('',#180403,1.); +#180403 = DIRECTION('',(1.,-3.700743415417E-16,0.)); +#180404 = ORIENTED_EDGE('',*,*,#180405,.T.); +#180405 = EDGE_CURVE('',#180398,#180020,#180406,.T.); +#180406 = CIRCLE('',#180407,0.2); +#180407 = AXIS2_PLACEMENT_3D('',#180408,#180409,#180410); +#180408 = CARTESIAN_POINT('',(-0.9,1.85,1.805)); +#180409 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180410 = DIRECTION('',(4.285034420285E-32,-1.,1.5407922168E-32)); +#180411 = ORIENTED_EDGE('',*,*,#180019,.T.); +#180412 = ORIENTED_EDGE('',*,*,#179938,.T.); +#180413 = PLANE('',#180414); +#180414 = AXIS2_PLACEMENT_3D('',#180415,#180416,#180417); +#180415 = CARTESIAN_POINT('',(-1.148722680368E-16,-1.437125395865E-16, + 1.805)); +#180416 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180417 = DIRECTION('',(-1.,0.,-4.285034420285E-32)); +#180418 = ADVANCED_FACE('',(#180419),#180430,.T.); +#180419 = FACE_BOUND('',#180420,.T.); +#180420 = EDGE_LOOP('',(#180421,#180422,#180429)); +#180421 = ORIENTED_EDGE('',*,*,#179946,.F.); +#180422 = ORIENTED_EDGE('',*,*,#180423,.T.); +#180423 = EDGE_CURVE('',#179939,#179997,#180424,.T.); +#180424 = CIRCLE('',#180425,0.1); +#180425 = AXIS2_PLACEMENT_3D('',#180426,#180427,#180428); +#180426 = CARTESIAN_POINT('',(0.7,1.9,1.705)); +#180427 = DIRECTION('',(0.,1.,-0.)); +#180428 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#180429 = ORIENTED_EDGE('',*,*,#179996,.F.); +#180430 = SPHERICAL_SURFACE('',#180431,0.1); +#180431 = AXIS2_PLACEMENT_3D('',#180432,#180433,#180434); +#180432 = CARTESIAN_POINT('',(0.7,1.9,1.705)); +#180433 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#180434 = DIRECTION('',(4.285034420285E-32,1.,-1.5407922168E-32)); +#180435 = ADVANCED_FACE('',(#180436),#180454,.F.); +#180436 = FACE_BOUND('',#180437,.F.); +#180437 = EDGE_LOOP('',(#180438,#180439,#180447,#180452,#180453)); +#180438 = ORIENTED_EDGE('',*,*,#180183,.T.); +#180439 = ORIENTED_EDGE('',*,*,#180440,.T.); +#180440 = EDGE_CURVE('',#180184,#180441,#180443,.T.); +#180441 = VERTEX_POINT('',#180442); +#180442 = CARTESIAN_POINT('',(0.842105263158,2.,0.35)); +#180443 = LINE('',#180444,#180445); +#180444 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180445 = VECTOR('',#180446,1.); +#180446 = DIRECTION('',(1.,0.,0.)); +#180447 = ORIENTED_EDGE('',*,*,#180448,.T.); +#180448 = EDGE_CURVE('',#180441,#179987,#180449,.T.); +#180449 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180450,#180451), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180450 = CARTESIAN_POINT('',(0.842105263158,2.,0.35)); +#180451 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#180452 = ORIENTED_EDGE('',*,*,#179986,.T.); +#180453 = ORIENTED_EDGE('',*,*,#179971,.F.); +#180454 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180455,#180456) + ,(#180457,#180458) + ,(#180459,#180460) + ,(#180461,#180462) + ,(#180463,#180464) + ,(#180465,#180466) + ,(#180467,#180468) + ,(#180469,#180470 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(4.712388980385, + 6.28318530718),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180455 = CARTESIAN_POINT('',(0.7,2.,0.35)); +#180456 = CARTESIAN_POINT('',(0.7,2.,1.45)); +#180457 = CARTESIAN_POINT('',(0.72030075188,2.,0.35)); +#180458 = CARTESIAN_POINT('',(0.722439947526,2.,1.45)); +#180459 = CARTESIAN_POINT('',(0.740601503759,2.,0.35)); +#180460 = CARTESIAN_POINT('',(0.744879786498,1.994125111345,1.45)); +#180461 = CARTESIAN_POINT('',(0.760902255639,2.,0.35)); +#180462 = CARTESIAN_POINT('',(0.765474694082,1.98237627222,1.45)); +#180463 = CARTESIAN_POINT('',(0.781203007519,2.,0.35)); +#180464 = CARTESIAN_POINT('',(0.78237627222,1.965474694082,1.45)); +#180465 = CARTESIAN_POINT('',(0.801503759398,2.,0.35)); +#180466 = CARTESIAN_POINT('',(0.794125111345,1.944879786498,1.45)); +#180467 = CARTESIAN_POINT('',(0.821804511278,2.,0.35)); +#180468 = CARTESIAN_POINT('',(0.8,1.922439947526,1.45)); +#180469 = CARTESIAN_POINT('',(0.842105263158,2.,0.35)); +#180470 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#180471 = ADVANCED_FACE('',(#180472),#180497,.T.); +#180472 = FACE_BOUND('',#180473,.T.); +#180473 = EDGE_LOOP('',(#180474,#180475,#180483,#180491)); +#180474 = ORIENTED_EDGE('',*,*,#180005,.T.); +#180475 = ORIENTED_EDGE('',*,*,#180476,.T.); +#180476 = EDGE_CURVE('',#179997,#180477,#180479,.T.); +#180477 = VERTEX_POINT('',#180478); +#180478 = CARTESIAN_POINT('',(0.8,1.85,1.705)); +#180479 = LINE('',#180480,#180481); +#180480 = CARTESIAN_POINT('',(0.8,1.9,1.705)); +#180481 = VECTOR('',#180482,1.); +#180482 = DIRECTION('',(0.,-1.,0.)); +#180483 = ORIENTED_EDGE('',*,*,#180484,.F.); +#180484 = EDGE_CURVE('',#180485,#180477,#180487,.T.); +#180485 = VERTEX_POINT('',#180486); +#180486 = CARTESIAN_POINT('',(0.8,1.85,1.45)); +#180487 = LINE('',#180488,#180489); +#180488 = CARTESIAN_POINT('',(0.8,1.85,1.45)); +#180489 = VECTOR('',#180490,1.); +#180490 = DIRECTION('',(0.,0.,1.)); +#180491 = ORIENTED_EDGE('',*,*,#180492,.F.); +#180492 = EDGE_CURVE('',#179987,#180485,#180493,.T.); +#180493 = LINE('',#180494,#180495); +#180494 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#180495 = VECTOR('',#180496,1.); +#180496 = DIRECTION('',(0.,-1.,0.)); +#180497 = PLANE('',#180498); +#180498 = AXIS2_PLACEMENT_3D('',#180499,#180500,#180501); +#180499 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#180500 = DIRECTION('',(1.,0.,0.)); +#180501 = DIRECTION('',(0.,-1.,0.)); +#180502 = ADVANCED_FACE('',(#180503),#180515,.T.); +#180503 = FACE_BOUND('',#180504,.T.); +#180504 = EDGE_LOOP('',(#180505,#180512,#180513,#180514)); +#180505 = ORIENTED_EDGE('',*,*,#180506,.F.); +#180506 = EDGE_CURVE('',#180398,#180240,#180507,.T.); +#180507 = CIRCLE('',#180508,0.1); +#180508 = AXIS2_PLACEMENT_3D('',#180509,#180510,#180511); +#180509 = CARTESIAN_POINT('',(-0.9,1.65,1.705)); +#180510 = DIRECTION('',(-1.,3.700743415417E-16,0.)); +#180511 = DIRECTION('',(5.702076650848E-48,1.5407922168E-32,1.)); +#180512 = ORIENTED_EDGE('',*,*,#180405,.T.); +#180513 = ORIENTED_EDGE('',*,*,#180029,.T.); +#180514 = ORIENTED_EDGE('',*,*,#180239,.F.); +#180515 = TOROIDAL_SURFACE('',#180516,0.2,0.1); +#180516 = AXIS2_PLACEMENT_3D('',#180517,#180518,#180519); +#180517 = CARTESIAN_POINT('',(-0.9,1.85,1.705)); +#180518 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#180519 = DIRECTION('',(4.285034420285E-32,-1.,1.5407922168E-32)); +#180520 = ADVANCED_FACE('',(#180521),#180545,.F.); +#180521 = FACE_BOUND('',#180522,.F.); +#180522 = EDGE_LOOP('',(#180523,#180524,#180531,#180540)); +#180523 = ORIENTED_EDGE('',*,*,#180044,.F.); +#180524 = ORIENTED_EDGE('',*,*,#180525,.T.); +#180525 = EDGE_CURVE('',#180045,#180526,#180528,.T.); +#180526 = VERTEX_POINT('',#180527); +#180527 = CARTESIAN_POINT('',(-1.748229458184,-1.529700775911,1.45)); +#180528 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180529,#180530), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180529 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180530 = CARTESIAN_POINT('',(-1.748229458184,-1.529700775911,1.45)); +#180531 = ORIENTED_EDGE('',*,*,#180532,.T.); +#180532 = EDGE_CURVE('',#180526,#180533,#180535,.T.); +#180533 = VERTEX_POINT('',#180534); +#180534 = CARTESIAN_POINT('',(-1.529700775911,-1.748229458184,1.45)); +#180535 = CIRCLE('',#180536,0.25); +#180536 = AXIS2_PLACEMENT_3D('',#180537,#180538,#180539); +#180537 = CARTESIAN_POINT('',(-1.5,-1.5,1.45)); +#180538 = DIRECTION('',(0.,0.,1.)); +#180539 = DIRECTION('',(1.,0.,-0.)); +#180540 = ORIENTED_EDGE('',*,*,#180541,.F.); +#180541 = EDGE_CURVE('',#180047,#180533,#180542,.T.); +#180542 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180543,#180544), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180543 = CARTESIAN_POINT('',(-1.75,-2.,0.35)); +#180544 = CARTESIAN_POINT('',(-1.529700775911,-1.748229458184,1.45)); +#180545 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180546,#180547) + ,(#180548,#180549) + ,(#180550,#180551) + ,(#180552,#180553) + ,(#180554,#180555) + ,(#180556,#180557) + ,(#180558,#180559) + ,(#180560,#180561 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(1.570796326795, + 3.14159265359),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180546 = CARTESIAN_POINT('',(-1.75,-2.,0.35)); +#180547 = CARTESIAN_POINT('',(-1.529700775911,-1.748229458184,1.45)); +#180548 = CARTESIAN_POINT('',(-1.806099868814,-2.,0.35)); +#180549 = CARTESIAN_POINT('',(-1.576957551331,-1.742575161924,1.45)); +#180550 = CARTESIAN_POINT('',(-1.862199466246,-1.985312778362,0.35)); +#180551 = CARTESIAN_POINT('',(-1.622958407438,-1.72642483542,1.45)); +#180552 = CARTESIAN_POINT('',(-1.913686735206,-1.955940680551,0.35)); +#180553 = CARTESIAN_POINT('',(-1.664906447161,-1.700113819693,1.45)); +#180554 = CARTESIAN_POINT('',(-1.955940680551,-1.913686735206,0.35)); +#180555 = CARTESIAN_POINT('',(-1.700113819693,-1.664906447161,1.45)); +#180556 = CARTESIAN_POINT('',(-1.985312778362,-1.862199466246,0.35)); +#180557 = CARTESIAN_POINT('',(-1.72642483542,-1.622958407438,1.45)); +#180558 = CARTESIAN_POINT('',(-2.,-1.806099868814,0.35)); +#180559 = CARTESIAN_POINT('',(-1.742575161924,-1.576957551331,1.45)); +#180560 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180561 = CARTESIAN_POINT('',(-1.748229458184,-1.529700775911,1.45)); +#180562 = ADVANCED_FACE('',(#180563),#180581,.F.); +#180563 = FACE_BOUND('',#180564,.F.); +#180564 = EDGE_LOOP('',(#180565,#180566,#180567,#180576)); +#180565 = ORIENTED_EDGE('',*,*,#180159,.T.); +#180566 = ORIENTED_EDGE('',*,*,#180541,.T.); +#180567 = ORIENTED_EDGE('',*,*,#180568,.T.); +#180568 = EDGE_CURVE('',#180533,#180569,#180571,.T.); +#180569 = VERTEX_POINT('',#180570); +#180570 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#180571 = CIRCLE('',#180572,0.25); +#180572 = AXIS2_PLACEMENT_3D('',#180573,#180574,#180575); +#180573 = CARTESIAN_POINT('',(-1.5,-1.5,1.45)); +#180574 = DIRECTION('',(0.,0.,1.)); +#180575 = DIRECTION('',(1.,0.,-0.)); +#180576 = ORIENTED_EDGE('',*,*,#180577,.F.); +#180577 = EDGE_CURVE('',#180152,#180569,#180578,.T.); +#180578 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180579,#180580), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180579 = CARTESIAN_POINT('',(-1.714285714286,-2.,0.35)); +#180580 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#180581 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#180582,#180583) + ,(#180584,#180585) + ,(#180586,#180587) + ,(#180588,#180589) + ,(#180590,#180591 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(1.570796326795, + 1.689880688517),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180582 = CARTESIAN_POINT('',(-1.714285714286,-2.,0.35)); +#180583 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#180584 = CARTESIAN_POINT('',(-1.723214285714,-2.,0.35)); +#180585 = CARTESIAN_POINT('',(-1.507442772608,-1.75,1.45)); +#180586 = CARTESIAN_POINT('',(-1.732142857143,-2.,0.35)); +#180587 = CARTESIAN_POINT('',(-1.514885549367,-1.749704560515,1.45)); +#180588 = CARTESIAN_POINT('',(-1.741071428571,-2.,0.35)); +#180589 = CARTESIAN_POINT('',(-1.522310714264,-1.749113682669,1.45)); +#180590 = CARTESIAN_POINT('',(-1.75,-2.,0.35)); +#180591 = CARTESIAN_POINT('',(-1.529700775911,-1.748229458184,1.45)); +#180592 = ADVANCED_FACE('',(#180593),#180610,.F.); +#180593 = FACE_BOUND('',#180594,.F.); +#180594 = EDGE_LOOP('',(#180595,#180596,#180597,#180605)); +#180595 = ORIENTED_EDGE('',*,*,#180151,.T.); +#180596 = ORIENTED_EDGE('',*,*,#180577,.T.); +#180597 = ORIENTED_EDGE('',*,*,#180598,.T.); +#180598 = EDGE_CURVE('',#180569,#180599,#180601,.T.); +#180599 = VERTEX_POINT('',#180600); +#180600 = CARTESIAN_POINT('',(-0.9,-1.75,1.45)); +#180601 = LINE('',#180602,#180603); +#180602 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#180603 = VECTOR('',#180604,1.); +#180604 = DIRECTION('',(1.,0.,0.)); +#180605 = ORIENTED_EDGE('',*,*,#180606,.F.); +#180606 = EDGE_CURVE('',#180144,#180599,#180607,.T.); +#180607 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180608,#180609), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180608 = CARTESIAN_POINT('',(-1.028571428571,-2.,0.35)); +#180609 = CARTESIAN_POINT('',(-0.9,-1.75,1.45)); +#180610 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#180611,#180612) + ,(#180613,#180614 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(2.778571428571, + 3.464285714286),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180611 = CARTESIAN_POINT('',(-1.028571428571,-2.,0.35)); +#180612 = CARTESIAN_POINT('',(-0.9,-1.75,1.45)); +#180613 = CARTESIAN_POINT('',(-1.714285714286,-2.,0.35)); +#180614 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#180615 = ADVANCED_FACE('',(#180616),#180634,.F.); +#180616 = FACE_BOUND('',#180617,.F.); +#180617 = EDGE_LOOP('',(#180618,#180619,#180620,#180629)); +#180618 = ORIENTED_EDGE('',*,*,#180143,.T.); +#180619 = ORIENTED_EDGE('',*,*,#180606,.T.); +#180620 = ORIENTED_EDGE('',*,*,#180621,.F.); +#180621 = EDGE_CURVE('',#180622,#180599,#180624,.T.); +#180622 = VERTEX_POINT('',#180623); +#180623 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#180624 = CIRCLE('',#180625,0.1); +#180625 = AXIS2_PLACEMENT_3D('',#180626,#180627,#180628); +#180626 = CARTESIAN_POINT('',(-0.9,-1.85,1.45)); +#180627 = DIRECTION('',(0.,0.,1.)); +#180628 = DIRECTION('',(1.,0.,-0.)); +#180629 = ORIENTED_EDGE('',*,*,#180630,.F.); +#180630 = EDGE_CURVE('',#180136,#180622,#180631,.T.); +#180631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180632,#180633), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180632 = CARTESIAN_POINT('',(-0.864864864865,-2.,0.35)); +#180633 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#180634 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180635,#180636) + ,(#180637,#180638) + ,(#180639,#180640) + ,(#180641,#180642) + ,(#180643,#180644) + ,(#180645,#180646) + ,(#180647,#180648) + ,(#180649,#180650 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(7.700466042415E-17, + 1.570796326795),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180635 = CARTESIAN_POINT('',(-0.864864864865,-2.,0.35)); +#180636 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#180637 = CARTESIAN_POINT('',(-0.888251516823,-2.,0.35)); +#180638 = CARTESIAN_POINT('',(-0.8,-1.827560052474,1.45)); +#180639 = CARTESIAN_POINT('',(-0.911638168781,-2.,0.35)); +#180640 = CARTESIAN_POINT('',(-0.805874888655,-1.805120213502,1.45)); +#180641 = CARTESIAN_POINT('',(-0.935024820739,-2.,0.35)); +#180642 = CARTESIAN_POINT('',(-0.81762372778,-1.784525305918,1.45)); +#180643 = CARTESIAN_POINT('',(-0.958411472697,-2.,0.35)); +#180644 = CARTESIAN_POINT('',(-0.834525305918,-1.76762372778,1.45)); +#180645 = CARTESIAN_POINT('',(-0.981798124655,-2.,0.35)); +#180646 = CARTESIAN_POINT('',(-0.855120213502,-1.755874888655,1.45)); +#180647 = CARTESIAN_POINT('',(-1.005184776613,-2.,0.35)); +#180648 = CARTESIAN_POINT('',(-0.877560052474,-1.75,1.45)); +#180649 = CARTESIAN_POINT('',(-1.028571428571,-2.,0.35)); +#180650 = CARTESIAN_POINT('',(-0.9,-1.75,1.45)); +#180651 = ADVANCED_FACE('',(#180652),#180669,.F.); +#180652 = FACE_BOUND('',#180653,.F.); +#180653 = EDGE_LOOP('',(#180654,#180655,#180656,#180664)); +#180654 = ORIENTED_EDGE('',*,*,#180135,.T.); +#180655 = ORIENTED_EDGE('',*,*,#180630,.T.); +#180656 = ORIENTED_EDGE('',*,*,#180657,.T.); +#180657 = EDGE_CURVE('',#180622,#180658,#180660,.T.); +#180658 = VERTEX_POINT('',#180659); +#180659 = CARTESIAN_POINT('',(-0.8,-1.9,1.45)); +#180660 = LINE('',#180661,#180662); +#180661 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#180662 = VECTOR('',#180663,1.); +#180663 = DIRECTION('',(0.,-1.,0.)); +#180664 = ORIENTED_EDGE('',*,*,#180665,.F.); +#180665 = EDGE_CURVE('',#180128,#180658,#180666,.T.); +#180666 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180667,#180668), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180667 = CARTESIAN_POINT('',(-0.842105263158,-2.,0.35)); +#180668 = CARTESIAN_POINT('',(-0.8,-1.9,1.45)); +#180669 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#180670,#180671) + ,(#180672,#180673 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.E-02,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#180670 = CARTESIAN_POINT('',(-0.842105263158,-2.,0.35)); +#180671 = CARTESIAN_POINT('',(-0.8,-1.9,1.45)); +#180672 = CARTESIAN_POINT('',(-0.864864864865,-2.,0.35)); +#180673 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#180674 = ADVANCED_FACE('',(#180675),#180701,.F.); +#180675 = FACE_BOUND('',#180676,.F.); +#180676 = EDGE_LOOP('',(#180677,#180685,#180686,#180687,#180696)); +#180677 = ORIENTED_EDGE('',*,*,#180678,.T.); +#180678 = EDGE_CURVE('',#180679,#180120,#180681,.T.); +#180679 = VERTEX_POINT('',#180680); +#180680 = CARTESIAN_POINT('',(-0.7,-2.,0.35)); +#180681 = LINE('',#180682,#180683); +#180682 = CARTESIAN_POINT('',(0.8,-2.,0.35)); +#180683 = VECTOR('',#180684,1.); +#180684 = DIRECTION('',(-1.,0.,0.)); +#180685 = ORIENTED_EDGE('',*,*,#180127,.T.); +#180686 = ORIENTED_EDGE('',*,*,#180665,.T.); +#180687 = ORIENTED_EDGE('',*,*,#180688,.T.); +#180688 = EDGE_CURVE('',#180658,#180689,#180691,.T.); +#180689 = VERTEX_POINT('',#180690); +#180690 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#180691 = CIRCLE('',#180692,0.1); +#180692 = AXIS2_PLACEMENT_3D('',#180693,#180694,#180695); +#180693 = CARTESIAN_POINT('',(-0.7,-1.9,1.45)); +#180694 = DIRECTION('',(0.,0.,1.)); +#180695 = DIRECTION('',(1.,0.,-0.)); +#180696 = ORIENTED_EDGE('',*,*,#180697,.F.); +#180697 = EDGE_CURVE('',#180679,#180689,#180698,.T.); +#180698 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180699,#180700), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180699 = CARTESIAN_POINT('',(-0.7,-2.,0.35)); +#180700 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#180701 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180702,#180703) + ,(#180704,#180705) + ,(#180706,#180707) + ,(#180708,#180709) + ,(#180710,#180711) + ,(#180712,#180713) + ,(#180714,#180715) + ,(#180716,#180717 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(1.570796326795, + 3.14159265359),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180702 = CARTESIAN_POINT('',(-0.7,-2.,0.35)); +#180703 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#180704 = CARTESIAN_POINT('',(-0.72030075188,-2.,0.35)); +#180705 = CARTESIAN_POINT('',(-0.722439947526,-2.,1.45)); +#180706 = CARTESIAN_POINT('',(-0.740601503759,-2.,0.35)); +#180707 = CARTESIAN_POINT('',(-0.744879786498,-1.994125111345,1.45)); +#180708 = CARTESIAN_POINT('',(-0.760902255639,-2.,0.35)); +#180709 = CARTESIAN_POINT('',(-0.765474694082,-1.98237627222,1.45)); +#180710 = CARTESIAN_POINT('',(-0.781203007519,-2.,0.35)); +#180711 = CARTESIAN_POINT('',(-0.78237627222,-1.965474694082,1.45)); +#180712 = CARTESIAN_POINT('',(-0.801503759398,-2.,0.35)); +#180713 = CARTESIAN_POINT('',(-0.794125111345,-1.944879786498,1.45)); +#180714 = CARTESIAN_POINT('',(-0.821804511278,-2.,0.35)); +#180715 = CARTESIAN_POINT('',(-0.8,-1.922439947526,1.45)); +#180716 = CARTESIAN_POINT('',(-0.842105263158,-2.,0.35)); +#180717 = CARTESIAN_POINT('',(-0.8,-1.9,1.45)); +#180718 = ADVANCED_FACE('',(#180719),#180737,.T.); +#180719 = FACE_BOUND('',#180720,.T.); +#180720 = EDGE_LOOP('',(#180721,#180729,#180730,#180731)); +#180721 = ORIENTED_EDGE('',*,*,#180722,.T.); +#180722 = EDGE_CURVE('',#180723,#180120,#180725,.T.); +#180723 = VERTEX_POINT('',#180724); +#180724 = CARTESIAN_POINT('',(-0.8,-2.,0.1)); +#180725 = LINE('',#180726,#180727); +#180726 = CARTESIAN_POINT('',(-0.8,-2.,0.)); +#180727 = VECTOR('',#180728,1.); +#180728 = DIRECTION('',(0.,0.,1.)); +#180729 = ORIENTED_EDGE('',*,*,#180119,.T.); +#180730 = ORIENTED_EDGE('',*,*,#180173,.F.); +#180731 = ORIENTED_EDGE('',*,*,#180732,.F.); +#180732 = EDGE_CURVE('',#180723,#180174,#180733,.T.); +#180733 = LINE('',#180734,#180735); +#180734 = CARTESIAN_POINT('',(-0.8,-2.,0.1)); +#180735 = VECTOR('',#180736,1.); +#180736 = DIRECTION('',(0.,1.,0.)); +#180737 = PLANE('',#180738); +#180738 = AXIS2_PLACEMENT_3D('',#180739,#180740,#180741); +#180739 = CARTESIAN_POINT('',(-0.8,-2.,0.)); +#180740 = DIRECTION('',(-1.,0.,0.)); +#180741 = DIRECTION('',(0.,1.,0.)); +#180742 = ADVANCED_FACE('',(#180743),#180753,.F.); +#180743 = FACE_BOUND('',#180744,.F.); +#180744 = EDGE_LOOP('',(#180745,#180746,#180747,#180748)); +#180745 = ORIENTED_EDGE('',*,*,#180104,.T.); +#180746 = ORIENTED_EDGE('',*,*,#180216,.T.); +#180747 = ORIENTED_EDGE('',*,*,#180229,.F.); +#180748 = ORIENTED_EDGE('',*,*,#180749,.F.); +#180749 = EDGE_CURVE('',#180097,#180230,#180750,.T.); +#180750 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180751,#180752), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180751 = CARTESIAN_POINT('',(-1.028571428571,2.,0.35)); +#180752 = CARTESIAN_POINT('',(-0.9,1.75,1.45)); +#180753 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180754,#180755) + ,(#180756,#180757) + ,(#180758,#180759) + ,(#180760,#180761) + ,(#180762,#180763) + ,(#180764,#180765) + ,(#180766,#180767) + ,(#180768,#180769 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(4.712388980385, + 6.28318530718),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180754 = CARTESIAN_POINT('',(-1.028571428571,2.,0.35)); +#180755 = CARTESIAN_POINT('',(-0.9,1.75,1.45)); +#180756 = CARTESIAN_POINT('',(-1.005184776613,2.,0.35)); +#180757 = CARTESIAN_POINT('',(-0.877560052474,1.75,1.45)); +#180758 = CARTESIAN_POINT('',(-0.981798124655,2.,0.35)); +#180759 = CARTESIAN_POINT('',(-0.855120213502,1.755874888655,1.45)); +#180760 = CARTESIAN_POINT('',(-0.958411472697,2.,0.35)); +#180761 = CARTESIAN_POINT('',(-0.834525305918,1.76762372778,1.45)); +#180762 = CARTESIAN_POINT('',(-0.935024820739,2.,0.35)); +#180763 = CARTESIAN_POINT('',(-0.81762372778,1.784525305918,1.45)); +#180764 = CARTESIAN_POINT('',(-0.911638168781,2.,0.35)); +#180765 = CARTESIAN_POINT('',(-0.805874888655,1.805120213502,1.45)); +#180766 = CARTESIAN_POINT('',(-0.888251516823,2.,0.35)); +#180767 = CARTESIAN_POINT('',(-0.8,1.827560052474,1.45)); +#180768 = CARTESIAN_POINT('',(-0.864864864865,2.,0.35)); +#180769 = CARTESIAN_POINT('',(-0.8,1.85,1.45)); +#180770 = ADVANCED_FACE('',(#180771),#180788,.F.); +#180771 = FACE_BOUND('',#180772,.F.); +#180772 = EDGE_LOOP('',(#180773,#180774,#180775,#180783)); +#180773 = ORIENTED_EDGE('',*,*,#180096,.T.); +#180774 = ORIENTED_EDGE('',*,*,#180749,.T.); +#180775 = ORIENTED_EDGE('',*,*,#180776,.F.); +#180776 = EDGE_CURVE('',#180777,#180230,#180779,.T.); +#180777 = VERTEX_POINT('',#180778); +#180778 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#180779 = LINE('',#180780,#180781); +#180780 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#180781 = VECTOR('',#180782,1.); +#180782 = DIRECTION('',(1.,-3.700743415417E-16,0.)); +#180783 = ORIENTED_EDGE('',*,*,#180784,.F.); +#180784 = EDGE_CURVE('',#180089,#180777,#180785,.T.); +#180785 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180786,#180787), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180786 = CARTESIAN_POINT('',(-1.714285714286,2.,0.35)); +#180787 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#180788 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#180789,#180790) + ,(#180791,#180792 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(3.571428571429E-02, + 0.721428571429),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180789 = CARTESIAN_POINT('',(-1.714285714286,2.,0.35)); +#180790 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#180791 = CARTESIAN_POINT('',(-1.028571428571,2.,0.35)); +#180792 = CARTESIAN_POINT('',(-0.9,1.75,1.45)); +#180793 = ADVANCED_FACE('',(#180794),#180812,.F.); +#180794 = FACE_BOUND('',#180795,.F.); +#180795 = EDGE_LOOP('',(#180796,#180797,#180798,#180807)); +#180796 = ORIENTED_EDGE('',*,*,#180088,.T.); +#180797 = ORIENTED_EDGE('',*,*,#180784,.T.); +#180798 = ORIENTED_EDGE('',*,*,#180799,.T.); +#180799 = EDGE_CURVE('',#180777,#180800,#180802,.T.); +#180800 = VERTEX_POINT('',#180801); +#180801 = CARTESIAN_POINT('',(-1.529700775911,1.748229458184,1.45)); +#180802 = CIRCLE('',#180803,0.25); +#180803 = AXIS2_PLACEMENT_3D('',#180804,#180805,#180806); +#180804 = CARTESIAN_POINT('',(-1.5,1.5,1.45)); +#180805 = DIRECTION('',(0.,0.,1.)); +#180806 = DIRECTION('',(1.,0.,-0.)); +#180807 = ORIENTED_EDGE('',*,*,#180808,.F.); +#180808 = EDGE_CURVE('',#180080,#180800,#180809,.T.); +#180809 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180810,#180811), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180810 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180811 = CARTESIAN_POINT('',(-1.529700775911,1.748229458184,1.45)); +#180812 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#180813,#180814) + ,(#180815,#180816) + ,(#180817,#180818) + ,(#180819,#180820) + ,(#180821,#180822 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(4.593304618662, + 4.712388980385),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180813 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180814 = CARTESIAN_POINT('',(-1.529700775911,1.748229458184,1.45)); +#180815 = CARTESIAN_POINT('',(-1.741071428571,2.,0.35)); +#180816 = CARTESIAN_POINT('',(-1.522310714264,1.749113682669,1.45)); +#180817 = CARTESIAN_POINT('',(-1.732142857143,2.,0.35)); +#180818 = CARTESIAN_POINT('',(-1.514885549367,1.749704560515,1.45)); +#180819 = CARTESIAN_POINT('',(-1.723214285714,2.,0.35)); +#180820 = CARTESIAN_POINT('',(-1.507442772608,1.75,1.45)); +#180821 = CARTESIAN_POINT('',(-1.714285714286,2.,0.35)); +#180822 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#180823 = ADVANCED_FACE('',(#180824),#180842,.F.); +#180824 = FACE_BOUND('',#180825,.F.); +#180825 = EDGE_LOOP('',(#180826,#180827,#180828,#180837)); +#180826 = ORIENTED_EDGE('',*,*,#180079,.F.); +#180827 = ORIENTED_EDGE('',*,*,#180808,.T.); +#180828 = ORIENTED_EDGE('',*,*,#180829,.T.); +#180829 = EDGE_CURVE('',#180800,#180830,#180832,.T.); +#180830 = VERTEX_POINT('',#180831); +#180831 = CARTESIAN_POINT('',(-1.748229458184,1.529700775911,1.45)); +#180832 = CIRCLE('',#180833,0.25); +#180833 = AXIS2_PLACEMENT_3D('',#180834,#180835,#180836); +#180834 = CARTESIAN_POINT('',(-1.5,1.5,1.45)); +#180835 = DIRECTION('',(0.,0.,1.)); +#180836 = DIRECTION('',(1.,0.,-0.)); +#180837 = ORIENTED_EDGE('',*,*,#180838,.F.); +#180838 = EDGE_CURVE('',#180072,#180830,#180839,.T.); +#180839 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180840,#180841), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180840 = CARTESIAN_POINT('',(-2.,1.75,0.35)); +#180841 = CARTESIAN_POINT('',(-1.748229458184,1.529700775911,1.45)); +#180842 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#180843,#180844) + ,(#180845,#180846) + ,(#180847,#180848) + ,(#180849,#180850) + ,(#180851,#180852) + ,(#180853,#180854) + ,(#180855,#180856) + ,(#180857,#180858 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(3.14159265359, + 4.712388980385),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180843 = CARTESIAN_POINT('',(-2.,1.75,0.35)); +#180844 = CARTESIAN_POINT('',(-1.748229458184,1.529700775911,1.45)); +#180845 = CARTESIAN_POINT('',(-2.,1.806099868814,0.35)); +#180846 = CARTESIAN_POINT('',(-1.742575161924,1.576957551331,1.45)); +#180847 = CARTESIAN_POINT('',(-1.985312778362,1.862199466246,0.35)); +#180848 = CARTESIAN_POINT('',(-1.72642483542,1.622958407438,1.45)); +#180849 = CARTESIAN_POINT('',(-1.955940680551,1.913686735206,0.35)); +#180850 = CARTESIAN_POINT('',(-1.700113819693,1.664906447161,1.45)); +#180851 = CARTESIAN_POINT('',(-1.913686735206,1.955940680551,0.35)); +#180852 = CARTESIAN_POINT('',(-1.664906447161,1.700113819693,1.45)); +#180853 = CARTESIAN_POINT('',(-1.862199466246,1.985312778362,0.35)); +#180854 = CARTESIAN_POINT('',(-1.622958407439,1.72642483542,1.45)); +#180855 = CARTESIAN_POINT('',(-1.806099868814,2.,0.35)); +#180856 = CARTESIAN_POINT('',(-1.576957551331,1.742575161924,1.45)); +#180857 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#180858 = CARTESIAN_POINT('',(-1.529700775911,1.748229458184,1.45)); +#180859 = ADVANCED_FACE('',(#180860),#180878,.F.); +#180860 = FACE_BOUND('',#180861,.F.); +#180861 = EDGE_LOOP('',(#180862,#180863,#180864,#180873)); +#180862 = ORIENTED_EDGE('',*,*,#180071,.T.); +#180863 = ORIENTED_EDGE('',*,*,#180838,.T.); +#180864 = ORIENTED_EDGE('',*,*,#180865,.T.); +#180865 = EDGE_CURVE('',#180830,#180866,#180868,.T.); +#180866 = VERTEX_POINT('',#180867); +#180867 = CARTESIAN_POINT('',(-1.75,1.5,1.45)); +#180868 = CIRCLE('',#180869,0.25); +#180869 = AXIS2_PLACEMENT_3D('',#180870,#180871,#180872); +#180870 = CARTESIAN_POINT('',(-1.5,1.5,1.45)); +#180871 = DIRECTION('',(0.,0.,1.)); +#180872 = DIRECTION('',(1.,0.,-0.)); +#180873 = ORIENTED_EDGE('',*,*,#180874,.F.); +#180874 = EDGE_CURVE('',#180064,#180866,#180875,.T.); +#180875 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180876,#180877), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180876 = CARTESIAN_POINT('',(-2.,1.714285714286,0.35)); +#180877 = CARTESIAN_POINT('',(-1.75,1.5,1.45)); +#180878 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#180879,#180880) + ,(#180881,#180882) + ,(#180883,#180884) + ,(#180885,#180886) + ,(#180887,#180888 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(3.14159265359, + 3.260677015312),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180879 = CARTESIAN_POINT('',(-2.,1.714285714286,0.35)); +#180880 = CARTESIAN_POINT('',(-1.75,1.5,1.45)); +#180881 = CARTESIAN_POINT('',(-2.,1.723214285714,0.35)); +#180882 = CARTESIAN_POINT('',(-1.75,1.507442772608,1.45)); +#180883 = CARTESIAN_POINT('',(-2.,1.732142857143,0.35)); +#180884 = CARTESIAN_POINT('',(-1.749704560515,1.514885549367,1.45)); +#180885 = CARTESIAN_POINT('',(-2.,1.741071428571,0.35)); +#180886 = CARTESIAN_POINT('',(-1.749113682669,1.522310714264,1.45)); +#180887 = CARTESIAN_POINT('',(-2.,1.75,0.35)); +#180888 = CARTESIAN_POINT('',(-1.748229458184,1.529700775911,1.45)); +#180889 = ADVANCED_FACE('',(#180890),#180907,.F.); +#180890 = FACE_BOUND('',#180891,.F.); +#180891 = EDGE_LOOP('',(#180892,#180893,#180894,#180902)); +#180892 = ORIENTED_EDGE('',*,*,#180063,.T.); +#180893 = ORIENTED_EDGE('',*,*,#180874,.T.); +#180894 = ORIENTED_EDGE('',*,*,#180895,.F.); +#180895 = EDGE_CURVE('',#180896,#180866,#180898,.T.); +#180896 = VERTEX_POINT('',#180897); +#180897 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#180898 = LINE('',#180899,#180900); +#180899 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#180900 = VECTOR('',#180901,1.); +#180901 = DIRECTION('',(0.,1.,0.)); +#180902 = ORIENTED_EDGE('',*,*,#180903,.F.); +#180903 = EDGE_CURVE('',#180056,#180896,#180904,.T.); +#180904 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#180905,#180906), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180905 = CARTESIAN_POINT('',(-2.,-1.714285714286,0.35)); +#180906 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#180907 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#180908,#180909) + ,(#180910,#180911 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(3.571428571429E-02, + 3.464285714286),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180908 = CARTESIAN_POINT('',(-2.,-1.714285714286,0.35)); +#180909 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#180910 = CARTESIAN_POINT('',(-2.,1.714285714286,0.35)); +#180911 = CARTESIAN_POINT('',(-1.75,1.5,1.45)); +#180912 = ADVANCED_FACE('',(#180913),#180925,.F.); +#180913 = FACE_BOUND('',#180914,.F.); +#180914 = EDGE_LOOP('',(#180915,#180916,#180917,#180924)); +#180915 = ORIENTED_EDGE('',*,*,#180055,.T.); +#180916 = ORIENTED_EDGE('',*,*,#180903,.T.); +#180917 = ORIENTED_EDGE('',*,*,#180918,.T.); +#180918 = EDGE_CURVE('',#180896,#180526,#180919,.T.); +#180919 = CIRCLE('',#180920,0.25); +#180920 = AXIS2_PLACEMENT_3D('',#180921,#180922,#180923); +#180921 = CARTESIAN_POINT('',(-1.5,-1.5,1.45)); +#180922 = DIRECTION('',(0.,0.,1.)); +#180923 = DIRECTION('',(1.,0.,-0.)); +#180924 = ORIENTED_EDGE('',*,*,#180525,.F.); +#180925 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#180926,#180927) + ,(#180928,#180929) + ,(#180930,#180931) + ,(#180932,#180933) + ,(#180934,#180935 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(3.022508291867, + 3.14159265359),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#180926 = CARTESIAN_POINT('',(-2.,-1.75,0.35)); +#180927 = CARTESIAN_POINT('',(-1.748229458184,-1.529700775911,1.45)); +#180928 = CARTESIAN_POINT('',(-2.,-1.741071428571,0.35)); +#180929 = CARTESIAN_POINT('',(-1.749113682669,-1.522310714264,1.45)); +#180930 = CARTESIAN_POINT('',(-2.,-1.732142857143,0.35)); +#180931 = CARTESIAN_POINT('',(-1.749704560515,-1.514885549367,1.45)); +#180932 = CARTESIAN_POINT('',(-2.,-1.723214285714,0.35)); +#180933 = CARTESIAN_POINT('',(-1.75,-1.507442772608,1.45)); +#180934 = CARTESIAN_POINT('',(-2.,-1.714285714286,0.35)); +#180935 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#180936 = ADVANCED_FACE('',(#180937),#180964,.T.); +#180937 = FACE_BOUND('',#180938,.T.); +#180938 = EDGE_LOOP('',(#180939,#180940,#180949,#180957)); +#180939 = ORIENTED_EDGE('',*,*,#180199,.T.); +#180940 = ORIENTED_EDGE('',*,*,#180941,.T.); +#180941 = EDGE_CURVE('',#180192,#180942,#180944,.T.); +#180942 = VERTEX_POINT('',#180943); +#180943 = CARTESIAN_POINT('',(0.7,1.9,-1.387778780781E-17)); +#180944 = ELLIPSE('',#180945,0.141421356237,0.1); +#180945 = AXIS2_PLACEMENT_3D('',#180946,#180947,#180948); +#180946 = CARTESIAN_POINT('',(0.7,1.9,0.1)); +#180947 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#180948 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#180949 = ORIENTED_EDGE('',*,*,#180950,.F.); +#180950 = EDGE_CURVE('',#180951,#180942,#180953,.T.); +#180951 = VERTEX_POINT('',#180952); +#180952 = CARTESIAN_POINT('',(-0.7,1.9,-1.387778780781E-17)); +#180953 = LINE('',#180954,#180955); +#180954 = CARTESIAN_POINT('',(-0.8,1.9,-1.387778780781E-17)); +#180955 = VECTOR('',#180956,1.); +#180956 = DIRECTION('',(1.,0.,0.)); +#180957 = ORIENTED_EDGE('',*,*,#180958,.F.); +#180958 = EDGE_CURVE('',#180174,#180951,#180959,.T.); +#180959 = ELLIPSE('',#180960,0.141421356237,0.1); +#180960 = AXIS2_PLACEMENT_3D('',#180961,#180962,#180963); +#180961 = CARTESIAN_POINT('',(-0.7,1.9,0.1)); +#180962 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#180963 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#180964 = CYLINDRICAL_SURFACE('',#180965,0.1); +#180965 = AXIS2_PLACEMENT_3D('',#180966,#180967,#180968); +#180966 = CARTESIAN_POINT('',(-0.8,1.9,0.1)); +#180967 = DIRECTION('',(1.,0.,0.)); +#180968 = DIRECTION('',(-0.,1.,0.)); +#180969 = ADVANCED_FACE('',(#180970),#180995,.T.); +#180970 = FACE_BOUND('',#180971,.T.); +#180971 = EDGE_LOOP('',(#180972,#180973,#180981,#180989)); +#180972 = ORIENTED_EDGE('',*,*,#180191,.T.); +#180973 = ORIENTED_EDGE('',*,*,#180974,.T.); +#180974 = EDGE_CURVE('',#180184,#180975,#180977,.T.); +#180975 = VERTEX_POINT('',#180976); +#180976 = CARTESIAN_POINT('',(0.8,-2.,0.35)); +#180977 = LINE('',#180978,#180979); +#180978 = CARTESIAN_POINT('',(0.8,2.,0.35)); +#180979 = VECTOR('',#180980,1.); +#180980 = DIRECTION('',(0.,-1.,0.)); +#180981 = ORIENTED_EDGE('',*,*,#180982,.F.); +#180982 = EDGE_CURVE('',#180983,#180975,#180985,.T.); +#180983 = VERTEX_POINT('',#180984); +#180984 = CARTESIAN_POINT('',(0.8,-2.,0.1)); +#180985 = LINE('',#180986,#180987); +#180986 = CARTESIAN_POINT('',(0.8,-2.,0.)); +#180987 = VECTOR('',#180988,1.); +#180988 = DIRECTION('',(0.,0.,1.)); +#180989 = ORIENTED_EDGE('',*,*,#180990,.F.); +#180990 = EDGE_CURVE('',#180192,#180983,#180991,.T.); +#180991 = LINE('',#180992,#180993); +#180992 = CARTESIAN_POINT('',(0.8,2.,0.1)); +#180993 = VECTOR('',#180994,1.); +#180994 = DIRECTION('',(0.,-1.,0.)); +#180995 = PLANE('',#180996); +#180996 = AXIS2_PLACEMENT_3D('',#180997,#180998,#180999); +#180997 = CARTESIAN_POINT('',(0.8,2.,0.)); +#180998 = DIRECTION('',(1.,0.,0.)); +#180999 = DIRECTION('',(0.,-1.,0.)); +#181000 = ADVANCED_FACE('',(#181001),#181019,.T.); +#181001 = FACE_BOUND('',#181002,.T.); +#181002 = EDGE_LOOP('',(#181003,#181011,#181017,#181018)); +#181003 = ORIENTED_EDGE('',*,*,#181004,.T.); +#181004 = EDGE_CURVE('',#180777,#181005,#181007,.T.); +#181005 = VERTEX_POINT('',#181006); +#181006 = CARTESIAN_POINT('',(-1.5,1.75,1.705)); +#181007 = LINE('',#181008,#181009); +#181008 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#181009 = VECTOR('',#181010,1.); +#181010 = DIRECTION('',(0.,0.,1.)); +#181011 = ORIENTED_EDGE('',*,*,#181012,.T.); +#181012 = EDGE_CURVE('',#181005,#180240,#181013,.T.); +#181013 = LINE('',#181014,#181015); +#181014 = CARTESIAN_POINT('',(-1.5,1.75,1.705)); +#181015 = VECTOR('',#181016,1.); +#181016 = DIRECTION('',(1.,-3.700743415417E-16,0.)); +#181017 = ORIENTED_EDGE('',*,*,#180248,.F.); +#181018 = ORIENTED_EDGE('',*,*,#180776,.F.); +#181019 = PLANE('',#181020); +#181020 = AXIS2_PLACEMENT_3D('',#181021,#181022,#181023); +#181021 = CARTESIAN_POINT('',(-1.5,1.75,1.45)); +#181022 = DIRECTION('',(3.700743415417E-16,1.,0.)); +#181023 = DIRECTION('',(1.,-3.700743415417E-16,0.)); +#181024 = ADVANCED_FACE('',(#181025),#181037,.T.); +#181025 = FACE_BOUND('',#181026,.T.); +#181026 = EDGE_LOOP('',(#181027,#181028,#181035,#181036)); +#181027 = ORIENTED_EDGE('',*,*,#180262,.T.); +#181028 = ORIENTED_EDGE('',*,*,#181029,.T.); +#181029 = EDGE_CURVE('',#180263,#180477,#181030,.T.); +#181030 = CIRCLE('',#181031,0.1); +#181031 = AXIS2_PLACEMENT_3D('',#181032,#181033,#181034); +#181032 = CARTESIAN_POINT('',(0.7,1.85,1.705)); +#181033 = DIRECTION('',(0.,1.,-0.)); +#181034 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181035 = ORIENTED_EDGE('',*,*,#180476,.F.); +#181036 = ORIENTED_EDGE('',*,*,#180423,.F.); +#181037 = CYLINDRICAL_SURFACE('',#181038,0.1); +#181038 = AXIS2_PLACEMENT_3D('',#181039,#181040,#181041); +#181039 = CARTESIAN_POINT('',(0.7,1.9,1.705)); +#181040 = DIRECTION('',(0.,-1.,0.)); +#181041 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181042 = ADVANCED_FACE('',(#181043),#181063,.T.); +#181043 = FACE_BOUND('',#181044,.T.); +#181044 = EDGE_LOOP('',(#181045,#181046,#181047,#181056)); +#181045 = ORIENTED_EDGE('',*,*,#181029,.F.); +#181046 = ORIENTED_EDGE('',*,*,#180270,.T.); +#181047 = ORIENTED_EDGE('',*,*,#181048,.T.); +#181048 = EDGE_CURVE('',#180271,#181049,#181051,.T.); +#181049 = VERTEX_POINT('',#181050); +#181050 = CARTESIAN_POINT('',(0.9,1.75,1.705)); +#181051 = CIRCLE('',#181052,0.1); +#181052 = AXIS2_PLACEMENT_3D('',#181053,#181054,#181055); +#181053 = CARTESIAN_POINT('',(0.9,1.65,1.705)); +#181054 = DIRECTION('',(-1.,9.494107596575E-16,-4.285034420285E-32)); +#181055 = DIRECTION('',(-9.494107596575E-16,-1.,1.5407922168E-32)); +#181056 = ORIENTED_EDGE('',*,*,#181057,.F.); +#181057 = EDGE_CURVE('',#180477,#181049,#181058,.T.); +#181058 = CIRCLE('',#181059,0.1); +#181059 = AXIS2_PLACEMENT_3D('',#181060,#181061,#181062); +#181060 = CARTESIAN_POINT('',(0.9,1.85,1.705)); +#181061 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181062 = DIRECTION('',(-1.,-1.5407922168E-32,-4.285034420285E-32)); +#181063 = TOROIDAL_SURFACE('',#181064,0.2,0.1); +#181064 = AXIS2_PLACEMENT_3D('',#181065,#181066,#181067); +#181065 = CARTESIAN_POINT('',(0.9,1.85,1.705)); +#181066 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181067 = DIRECTION('',(-1.,-1.5407922168E-32,-4.285034420285E-32)); +#181068 = ADVANCED_FACE('',(#181069),#181088,.T.); +#181069 = FACE_BOUND('',#181070,.T.); +#181070 = EDGE_LOOP('',(#181071,#181072,#181081,#181087)); +#181071 = ORIENTED_EDGE('',*,*,#180279,.T.); +#181072 = ORIENTED_EDGE('',*,*,#181073,.T.); +#181073 = EDGE_CURVE('',#180280,#181074,#181076,.T.); +#181074 = VERTEX_POINT('',#181075); +#181075 = CARTESIAN_POINT('',(1.5,1.75,1.705)); +#181076 = CIRCLE('',#181077,0.1); +#181077 = AXIS2_PLACEMENT_3D('',#181078,#181079,#181080); +#181078 = CARTESIAN_POINT('',(1.5,1.65,1.705)); +#181079 = DIRECTION('',(-1.,0.,0.)); +#181080 = DIRECTION('',(0.,1.5407922168E-32,1.)); +#181081 = ORIENTED_EDGE('',*,*,#181082,.F.); +#181082 = EDGE_CURVE('',#181049,#181074,#181083,.T.); +#181083 = LINE('',#181084,#181085); +#181084 = CARTESIAN_POINT('',(0.9,1.75,1.705)); +#181085 = VECTOR('',#181086,1.); +#181086 = DIRECTION('',(1.,0.,0.)); +#181087 = ORIENTED_EDGE('',*,*,#181048,.F.); +#181088 = CYLINDRICAL_SURFACE('',#181089,0.1); +#181089 = AXIS2_PLACEMENT_3D('',#181090,#181091,#181092); +#181090 = CARTESIAN_POINT('',(0.9,1.65,1.705)); +#181091 = DIRECTION('',(1.,0.,0.)); +#181092 = DIRECTION('',(-0.,1.5407922168E-32,1.)); +#181093 = ADVANCED_FACE('',(#181094),#181114,.T.); +#181094 = FACE_BOUND('',#181095,.T.); +#181095 = EDGE_LOOP('',(#181096,#181097,#181098,#181107)); +#181096 = ORIENTED_EDGE('',*,*,#181073,.F.); +#181097 = ORIENTED_EDGE('',*,*,#180287,.T.); +#181098 = ORIENTED_EDGE('',*,*,#181099,.T.); +#181099 = EDGE_CURVE('',#180288,#181100,#181102,.T.); +#181100 = VERTEX_POINT('',#181101); +#181101 = CARTESIAN_POINT('',(1.75,1.5,1.705)); +#181102 = CIRCLE('',#181103,0.1); +#181103 = AXIS2_PLACEMENT_3D('',#181104,#181105,#181106); +#181104 = CARTESIAN_POINT('',(1.65,1.5,1.705)); +#181105 = DIRECTION('',(-6.123233995737E-17,1.,-1.5407922168E-32)); +#181106 = DIRECTION('',(1.,6.123233995737E-17,4.285034420285E-32)); +#181107 = ORIENTED_EDGE('',*,*,#181108,.F.); +#181108 = EDGE_CURVE('',#181074,#181100,#181109,.T.); +#181109 = CIRCLE('',#181110,0.25); +#181110 = AXIS2_PLACEMENT_3D('',#181111,#181112,#181113); +#181111 = CARTESIAN_POINT('',(1.5,1.5,1.705)); +#181112 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181113 = DIRECTION('',(1.714013768114E-32,1.,-1.5407922168E-32)); +#181114 = TOROIDAL_SURFACE('',#181115,0.15,0.1); +#181115 = AXIS2_PLACEMENT_3D('',#181116,#181117,#181118); +#181116 = CARTESIAN_POINT('',(1.5,1.5,1.705)); +#181117 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181118 = DIRECTION('',(1.714013768114E-32,1.,-1.5407922168E-32)); +#181119 = ADVANCED_FACE('',(#181120),#181132,.T.); +#181120 = FACE_BOUND('',#181121,.T.); +#181121 = EDGE_LOOP('',(#181122,#181123,#181124,#181125)); +#181122 = ORIENTED_EDGE('',*,*,#180397,.T.); +#181123 = ORIENTED_EDGE('',*,*,#180506,.T.); +#181124 = ORIENTED_EDGE('',*,*,#181012,.F.); +#181125 = ORIENTED_EDGE('',*,*,#181126,.F.); +#181126 = EDGE_CURVE('',#180389,#181005,#181127,.T.); +#181127 = CIRCLE('',#181128,0.1); +#181128 = AXIS2_PLACEMENT_3D('',#181129,#181130,#181131); +#181129 = CARTESIAN_POINT('',(-1.5,1.65,1.705)); +#181130 = DIRECTION('',(-1.,3.828568698927E-16,-4.285034420285E-32)); +#181131 = DIRECTION('',(3.828568698927E-16,1.,-1.5407922168E-32)); +#181132 = CYLINDRICAL_SURFACE('',#181133,0.1); +#181133 = AXIS2_PLACEMENT_3D('',#181134,#181135,#181136); +#181134 = CARTESIAN_POINT('',(-1.5,1.65,1.705)); +#181135 = DIRECTION('',(1.,-3.700743415417E-16,0.)); +#181136 = DIRECTION('',(5.702076650848E-48,1.5407922168E-32,1.)); +#181137 = ADVANCED_FACE('',(#181138),#181157,.T.); +#181138 = FACE_BOUND('',#181139,.T.); +#181139 = EDGE_LOOP('',(#181140,#181141,#181150,#181156)); +#181140 = ORIENTED_EDGE('',*,*,#180296,.T.); +#181141 = ORIENTED_EDGE('',*,*,#181142,.T.); +#181142 = EDGE_CURVE('',#180297,#181143,#181145,.T.); +#181143 = VERTEX_POINT('',#181144); +#181144 = CARTESIAN_POINT('',(1.75,-1.5,1.705)); +#181145 = CIRCLE('',#181146,0.1); +#181146 = AXIS2_PLACEMENT_3D('',#181147,#181148,#181149); +#181147 = CARTESIAN_POINT('',(1.65,-1.5,1.705)); +#181148 = DIRECTION('',(0.,1.,-0.)); +#181149 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181150 = ORIENTED_EDGE('',*,*,#181151,.F.); +#181151 = EDGE_CURVE('',#181100,#181143,#181152,.T.); +#181152 = LINE('',#181153,#181154); +#181153 = CARTESIAN_POINT('',(1.75,1.5,1.705)); +#181154 = VECTOR('',#181155,1.); +#181155 = DIRECTION('',(0.,-1.,0.)); +#181156 = ORIENTED_EDGE('',*,*,#181099,.F.); +#181157 = CYLINDRICAL_SURFACE('',#181158,0.1); +#181158 = AXIS2_PLACEMENT_3D('',#181159,#181160,#181161); +#181159 = CARTESIAN_POINT('',(1.65,1.5,1.705)); +#181160 = DIRECTION('',(0.,-1.,0.)); +#181161 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181162 = ADVANCED_FACE('',(#181163),#181183,.T.); +#181163 = FACE_BOUND('',#181164,.T.); +#181164 = EDGE_LOOP('',(#181165,#181174,#181175,#181176)); +#181165 = ORIENTED_EDGE('',*,*,#181166,.F.); +#181166 = EDGE_CURVE('',#180381,#181167,#181169,.T.); +#181167 = VERTEX_POINT('',#181168); +#181168 = CARTESIAN_POINT('',(-1.75,1.5,1.705)); +#181169 = CIRCLE('',#181170,0.1); +#181170 = AXIS2_PLACEMENT_3D('',#181171,#181172,#181173); +#181171 = CARTESIAN_POINT('',(-1.65,1.5,1.705)); +#181172 = DIRECTION('',(-0.,-1.,0.)); +#181173 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181174 = ORIENTED_EDGE('',*,*,#180388,.T.); +#181175 = ORIENTED_EDGE('',*,*,#181126,.T.); +#181176 = ORIENTED_EDGE('',*,*,#181177,.F.); +#181177 = EDGE_CURVE('',#181167,#181005,#181178,.T.); +#181178 = CIRCLE('',#181179,0.25); +#181179 = AXIS2_PLACEMENT_3D('',#181180,#181181,#181182); +#181180 = CARTESIAN_POINT('',(-1.5,1.5,1.705)); +#181181 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181182 = DIRECTION('',(-1.,-6.163168867199E-33,-4.285034420285E-32)); +#181183 = TOROIDAL_SURFACE('',#181184,0.15,0.1); +#181184 = AXIS2_PLACEMENT_3D('',#181185,#181186,#181187); +#181185 = CARTESIAN_POINT('',(-1.5,1.5,1.705)); +#181186 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181187 = DIRECTION('',(-1.,-6.163168867199E-33,-4.285034420285E-32)); +#181188 = ADVANCED_FACE('',(#181189),#181209,.T.); +#181189 = FACE_BOUND('',#181190,.T.); +#181190 = EDGE_LOOP('',(#181191,#181192,#181193,#181202)); +#181191 = ORIENTED_EDGE('',*,*,#181142,.F.); +#181192 = ORIENTED_EDGE('',*,*,#180304,.T.); +#181193 = ORIENTED_EDGE('',*,*,#181194,.T.); +#181194 = EDGE_CURVE('',#180305,#181195,#181197,.T.); +#181195 = VERTEX_POINT('',#181196); +#181196 = CARTESIAN_POINT('',(1.5,-1.75,1.705)); +#181197 = CIRCLE('',#181198,0.1); +#181198 = AXIS2_PLACEMENT_3D('',#181199,#181200,#181201); +#181199 = CARTESIAN_POINT('',(1.5,-1.65,1.705)); +#181200 = DIRECTION('',(1.,6.123233995737E-17,4.285034420285E-32)); +#181201 = DIRECTION('',(6.123233995737E-17,-1.,1.5407922168E-32)); +#181202 = ORIENTED_EDGE('',*,*,#181203,.F.); +#181203 = EDGE_CURVE('',#181143,#181195,#181204,.T.); +#181204 = CIRCLE('',#181205,0.25); +#181205 = AXIS2_PLACEMENT_3D('',#181206,#181207,#181208); +#181206 = CARTESIAN_POINT('',(1.5,-1.5,1.705)); +#181207 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181208 = DIRECTION('',(1.,-6.163168867198E-33,4.285034420285E-32)); +#181209 = TOROIDAL_SURFACE('',#181210,0.15,0.1); +#181210 = AXIS2_PLACEMENT_3D('',#181211,#181212,#181213); +#181211 = CARTESIAN_POINT('',(1.5,-1.5,1.705)); +#181212 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181213 = DIRECTION('',(1.,-6.163168867198E-33,4.285034420285E-32)); +#181214 = ADVANCED_FACE('',(#181215),#181234,.T.); +#181215 = FACE_BOUND('',#181216,.T.); +#181216 = EDGE_LOOP('',(#181217,#181218,#181219,#181227)); +#181217 = ORIENTED_EDGE('',*,*,#180380,.T.); +#181218 = ORIENTED_EDGE('',*,*,#181166,.T.); +#181219 = ORIENTED_EDGE('',*,*,#181220,.F.); +#181220 = EDGE_CURVE('',#181221,#181167,#181223,.T.); +#181221 = VERTEX_POINT('',#181222); +#181222 = CARTESIAN_POINT('',(-1.75,-1.5,1.705)); +#181223 = LINE('',#181224,#181225); +#181224 = CARTESIAN_POINT('',(-1.75,-1.5,1.705)); +#181225 = VECTOR('',#181226,1.); +#181226 = DIRECTION('',(0.,1.,0.)); +#181227 = ORIENTED_EDGE('',*,*,#181228,.F.); +#181228 = EDGE_CURVE('',#180372,#181221,#181229,.T.); +#181229 = CIRCLE('',#181230,0.1); +#181230 = AXIS2_PLACEMENT_3D('',#181231,#181232,#181233); +#181231 = CARTESIAN_POINT('',(-1.65,-1.5,1.705)); +#181232 = DIRECTION('',(5.053215498074E-16,-1.,1.5407922168E-32)); +#181233 = DIRECTION('',(-1.,-5.053215498074E-16,-4.285034420285E-32)); +#181234 = CYLINDRICAL_SURFACE('',#181235,0.1); +#181235 = AXIS2_PLACEMENT_3D('',#181236,#181237,#181238); +#181236 = CARTESIAN_POINT('',(-1.65,-1.5,1.705)); +#181237 = DIRECTION('',(0.,1.,0.)); +#181238 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181239 = ADVANCED_FACE('',(#181240),#181259,.T.); +#181240 = FACE_BOUND('',#181241,.T.); +#181241 = EDGE_LOOP('',(#181242,#181243,#181252,#181258)); +#181242 = ORIENTED_EDGE('',*,*,#180313,.T.); +#181243 = ORIENTED_EDGE('',*,*,#181244,.T.); +#181244 = EDGE_CURVE('',#180314,#181245,#181247,.T.); +#181245 = VERTEX_POINT('',#181246); +#181246 = CARTESIAN_POINT('',(0.9,-1.75,1.705)); +#181247 = CIRCLE('',#181248,0.1); +#181248 = AXIS2_PLACEMENT_3D('',#181249,#181250,#181251); +#181249 = CARTESIAN_POINT('',(0.9,-1.65,1.705)); +#181250 = DIRECTION('',(1.,0.,-0.)); +#181251 = DIRECTION('',(0.,1.5407922168E-32,1.)); +#181252 = ORIENTED_EDGE('',*,*,#181253,.F.); +#181253 = EDGE_CURVE('',#181195,#181245,#181254,.T.); +#181254 = LINE('',#181255,#181256); +#181255 = CARTESIAN_POINT('',(1.5,-1.75,1.705)); +#181256 = VECTOR('',#181257,1.); +#181257 = DIRECTION('',(-1.,-0.,-0.)); +#181258 = ORIENTED_EDGE('',*,*,#181194,.F.); +#181259 = CYLINDRICAL_SURFACE('',#181260,0.1); +#181260 = AXIS2_PLACEMENT_3D('',#181261,#181262,#181263); +#181261 = CARTESIAN_POINT('',(1.5,-1.65,1.705)); +#181262 = DIRECTION('',(-1.,-0.,-0.)); +#181263 = DIRECTION('',(-0.,1.5407922168E-32,1.)); +#181264 = ADVANCED_FACE('',(#181265),#181285,.T.); +#181265 = FACE_BOUND('',#181266,.T.); +#181266 = EDGE_LOOP('',(#181267,#181276,#181277,#181278)); +#181267 = ORIENTED_EDGE('',*,*,#181268,.F.); +#181268 = EDGE_CURVE('',#180364,#181269,#181271,.T.); +#181269 = VERTEX_POINT('',#181270); +#181270 = CARTESIAN_POINT('',(-1.5,-1.75,1.705)); +#181271 = CIRCLE('',#181272,0.1); +#181272 = AXIS2_PLACEMENT_3D('',#181273,#181274,#181275); +#181273 = CARTESIAN_POINT('',(-1.5,-1.65,1.705)); +#181274 = DIRECTION('',(1.,0.,-0.)); +#181275 = DIRECTION('',(0.,1.5407922168E-32,1.)); +#181276 = ORIENTED_EDGE('',*,*,#180371,.T.); +#181277 = ORIENTED_EDGE('',*,*,#181228,.T.); +#181278 = ORIENTED_EDGE('',*,*,#181279,.F.); +#181279 = EDGE_CURVE('',#181269,#181221,#181280,.T.); +#181280 = CIRCLE('',#181281,0.25); +#181281 = AXIS2_PLACEMENT_3D('',#181282,#181283,#181284); +#181282 = CARTESIAN_POINT('',(-1.5,-1.5,1.705)); +#181283 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181284 = DIRECTION('',(1.714013768114E-32,-1.,1.5407922168E-32)); +#181285 = TOROIDAL_SURFACE('',#181286,0.15,0.1); +#181286 = AXIS2_PLACEMENT_3D('',#181287,#181288,#181289); +#181287 = CARTESIAN_POINT('',(-1.5,-1.5,1.705)); +#181288 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181289 = DIRECTION('',(1.714013768114E-32,-1.,1.5407922168E-32)); +#181290 = ADVANCED_FACE('',(#181291),#181311,.T.); +#181291 = FACE_BOUND('',#181292,.T.); +#181292 = EDGE_LOOP('',(#181293,#181294,#181295,#181304)); +#181293 = ORIENTED_EDGE('',*,*,#181244,.F.); +#181294 = ORIENTED_EDGE('',*,*,#180321,.T.); +#181295 = ORIENTED_EDGE('',*,*,#181296,.T.); +#181296 = EDGE_CURVE('',#180322,#181297,#181299,.T.); +#181297 = VERTEX_POINT('',#181298); +#181298 = CARTESIAN_POINT('',(0.8,-1.85,1.705)); +#181299 = CIRCLE('',#181300,0.1); +#181300 = AXIS2_PLACEMENT_3D('',#181301,#181302,#181303); +#181301 = CARTESIAN_POINT('',(0.7,-1.85,1.705)); +#181302 = DIRECTION('',(-3.828568698927E-16,1.,-1.5407922168E-32)); +#181303 = DIRECTION('',(-1.,-3.828568698927E-16,-4.285034420285E-32)); +#181304 = ORIENTED_EDGE('',*,*,#181305,.F.); +#181305 = EDGE_CURVE('',#181245,#181297,#181306,.T.); +#181306 = CIRCLE('',#181307,0.1); +#181307 = AXIS2_PLACEMENT_3D('',#181308,#181309,#181310); +#181308 = CARTESIAN_POINT('',(0.9,-1.85,1.705)); +#181309 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181310 = DIRECTION('',(4.285034420285E-32,1.,-1.5407922168E-32)); +#181311 = TOROIDAL_SURFACE('',#181312,0.2,0.1); +#181312 = AXIS2_PLACEMENT_3D('',#181313,#181314,#181315); +#181313 = CARTESIAN_POINT('',(0.9,-1.85,1.705)); +#181314 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181315 = DIRECTION('',(4.285034420285E-32,1.,-1.5407922168E-32)); +#181316 = ADVANCED_FACE('',(#181317),#181336,.T.); +#181317 = FACE_BOUND('',#181318,.T.); +#181318 = EDGE_LOOP('',(#181319,#181320,#181321,#181329)); +#181319 = ORIENTED_EDGE('',*,*,#180363,.T.); +#181320 = ORIENTED_EDGE('',*,*,#181268,.T.); +#181321 = ORIENTED_EDGE('',*,*,#181322,.F.); +#181322 = EDGE_CURVE('',#181323,#181269,#181325,.T.); +#181323 = VERTEX_POINT('',#181324); +#181324 = CARTESIAN_POINT('',(-0.9,-1.75,1.705)); +#181325 = LINE('',#181326,#181327); +#181326 = CARTESIAN_POINT('',(-0.9,-1.75,1.705)); +#181327 = VECTOR('',#181328,1.); +#181328 = DIRECTION('',(-1.,-0.,-0.)); +#181329 = ORIENTED_EDGE('',*,*,#181330,.F.); +#181330 = EDGE_CURVE('',#180355,#181323,#181331,.T.); +#181331 = CIRCLE('',#181332,0.1); +#181332 = AXIS2_PLACEMENT_3D('',#181333,#181334,#181335); +#181333 = CARTESIAN_POINT('',(-0.9,-1.65,1.705)); +#181334 = DIRECTION('',(1.,-6.123233995737E-17,4.285034420285E-32)); +#181335 = DIRECTION('',(6.123233995737E-17,1.,-1.5407922168E-32)); +#181336 = CYLINDRICAL_SURFACE('',#181337,0.1); +#181337 = AXIS2_PLACEMENT_3D('',#181338,#181339,#181340); +#181338 = CARTESIAN_POINT('',(-0.9,-1.65,1.705)); +#181339 = DIRECTION('',(-1.,-0.,-0.)); +#181340 = DIRECTION('',(-0.,1.5407922168E-32,1.)); +#181341 = ADVANCED_FACE('',(#181342),#181361,.T.); +#181342 = FACE_BOUND('',#181343,.T.); +#181343 = EDGE_LOOP('',(#181344,#181345,#181354,#181360)); +#181344 = ORIENTED_EDGE('',*,*,#180330,.T.); +#181345 = ORIENTED_EDGE('',*,*,#181346,.T.); +#181346 = EDGE_CURVE('',#180331,#181347,#181349,.T.); +#181347 = VERTEX_POINT('',#181348); +#181348 = CARTESIAN_POINT('',(0.8,-1.9,1.705)); +#181349 = CIRCLE('',#181350,0.1); +#181350 = AXIS2_PLACEMENT_3D('',#181351,#181352,#181353); +#181351 = CARTESIAN_POINT('',(0.7,-1.9,1.705)); +#181352 = DIRECTION('',(0.,1.,-0.)); +#181353 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181354 = ORIENTED_EDGE('',*,*,#181355,.F.); +#181355 = EDGE_CURVE('',#181297,#181347,#181356,.T.); +#181356 = LINE('',#181357,#181358); +#181357 = CARTESIAN_POINT('',(0.8,-1.85,1.705)); +#181358 = VECTOR('',#181359,1.); +#181359 = DIRECTION('',(-0.,-1.,-0.)); +#181360 = ORIENTED_EDGE('',*,*,#181296,.F.); +#181361 = CYLINDRICAL_SURFACE('',#181362,0.1); +#181362 = AXIS2_PLACEMENT_3D('',#181363,#181364,#181365); +#181363 = CARTESIAN_POINT('',(0.7,-1.85,1.705)); +#181364 = DIRECTION('',(-0.,-1.,-0.)); +#181365 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181366 = ADVANCED_FACE('',(#181367),#181387,.T.); +#181367 = FACE_BOUND('',#181368,.T.); +#181368 = EDGE_LOOP('',(#181369,#181378,#181379,#181380)); +#181369 = ORIENTED_EDGE('',*,*,#181370,.F.); +#181370 = EDGE_CURVE('',#180347,#181371,#181373,.T.); +#181371 = VERTEX_POINT('',#181372); +#181372 = CARTESIAN_POINT('',(-0.8,-1.85,1.705)); +#181373 = CIRCLE('',#181374,0.1); +#181374 = AXIS2_PLACEMENT_3D('',#181375,#181376,#181377); +#181375 = CARTESIAN_POINT('',(-0.7,-1.85,1.705)); +#181376 = DIRECTION('',(0.,-1.,0.)); +#181377 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181378 = ORIENTED_EDGE('',*,*,#180354,.T.); +#181379 = ORIENTED_EDGE('',*,*,#181330,.T.); +#181380 = ORIENTED_EDGE('',*,*,#181381,.F.); +#181381 = EDGE_CURVE('',#181371,#181323,#181382,.T.); +#181382 = CIRCLE('',#181383,0.1); +#181383 = AXIS2_PLACEMENT_3D('',#181384,#181385,#181386); +#181384 = CARTESIAN_POINT('',(-0.9,-1.85,1.705)); +#181385 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181386 = DIRECTION('',(1.,-1.5407922168E-32,4.285034420285E-32)); +#181387 = TOROIDAL_SURFACE('',#181388,0.2,0.1); +#181388 = AXIS2_PLACEMENT_3D('',#181389,#181390,#181391); +#181389 = CARTESIAN_POINT('',(-0.9,-1.85,1.705)); +#181390 = DIRECTION('',(-4.285034420285E-32,1.5407922168E-32,1.)); +#181391 = DIRECTION('',(1.,-1.5407922168E-32,4.285034420285E-32)); +#181392 = ADVANCED_FACE('',(#181393),#181420,.T.); +#181393 = FACE_BOUND('',#181394,.T.); +#181394 = EDGE_LOOP('',(#181395,#181396,#181405,#181413)); +#181395 = ORIENTED_EDGE('',*,*,#180338,.T.); +#181396 = ORIENTED_EDGE('',*,*,#181397,.T.); +#181397 = EDGE_CURVE('',#180339,#181398,#181400,.T.); +#181398 = VERTEX_POINT('',#181399); +#181399 = CARTESIAN_POINT('',(-0.7,-2.,1.705)); +#181400 = CIRCLE('',#181401,0.1); +#181401 = AXIS2_PLACEMENT_3D('',#181402,#181403,#181404); +#181402 = CARTESIAN_POINT('',(-0.7,-1.9,1.705)); +#181403 = DIRECTION('',(1.,0.,-0.)); +#181404 = DIRECTION('',(0.,1.5407922168E-32,1.)); +#181405 = ORIENTED_EDGE('',*,*,#181406,.F.); +#181406 = EDGE_CURVE('',#181407,#181398,#181409,.T.); +#181407 = VERTEX_POINT('',#181408); +#181408 = CARTESIAN_POINT('',(0.7,-2.,1.705)); +#181409 = LINE('',#181410,#181411); +#181410 = CARTESIAN_POINT('',(0.7,-2.,1.705)); +#181411 = VECTOR('',#181412,1.); +#181412 = DIRECTION('',(-1.,-0.,-0.)); +#181413 = ORIENTED_EDGE('',*,*,#181414,.F.); +#181414 = EDGE_CURVE('',#180331,#181407,#181415,.T.); +#181415 = CIRCLE('',#181416,0.1); +#181416 = AXIS2_PLACEMENT_3D('',#181417,#181418,#181419); +#181417 = CARTESIAN_POINT('',(0.7,-1.9,1.705)); +#181418 = DIRECTION('',(1.,6.123233995737E-17,4.285034420285E-32)); +#181419 = DIRECTION('',(6.123233995737E-17,-1.,1.5407922168E-32)); +#181420 = CYLINDRICAL_SURFACE('',#181421,0.1); +#181421 = AXIS2_PLACEMENT_3D('',#181422,#181423,#181424); +#181422 = CARTESIAN_POINT('',(0.7,-1.9,1.705)); +#181423 = DIRECTION('',(-1.,-0.,-0.)); +#181424 = DIRECTION('',(-0.,1.5407922168E-32,1.)); +#181425 = ADVANCED_FACE('',(#181426),#181445,.T.); +#181426 = FACE_BOUND('',#181427,.T.); +#181427 = EDGE_LOOP('',(#181428,#181429,#181430,#181438)); +#181428 = ORIENTED_EDGE('',*,*,#180346,.T.); +#181429 = ORIENTED_EDGE('',*,*,#181370,.T.); +#181430 = ORIENTED_EDGE('',*,*,#181431,.F.); +#181431 = EDGE_CURVE('',#181432,#181371,#181434,.T.); +#181432 = VERTEX_POINT('',#181433); +#181433 = CARTESIAN_POINT('',(-0.8,-1.9,1.705)); +#181434 = LINE('',#181435,#181436); +#181435 = CARTESIAN_POINT('',(-0.8,-1.9,1.705)); +#181436 = VECTOR('',#181437,1.); +#181437 = DIRECTION('',(0.,1.,0.)); +#181438 = ORIENTED_EDGE('',*,*,#181439,.F.); +#181439 = EDGE_CURVE('',#180339,#181432,#181440,.T.); +#181440 = CIRCLE('',#181441,0.1); +#181441 = AXIS2_PLACEMENT_3D('',#181442,#181443,#181444); +#181442 = CARTESIAN_POINT('',(-0.7,-1.9,1.705)); +#181443 = DIRECTION('',(6.123233995737E-17,-1.,1.5407922168E-32)); +#181444 = DIRECTION('',(-1.,-6.123233995737E-17,-4.285034420285E-32)); +#181445 = CYLINDRICAL_SURFACE('',#181446,0.1); +#181446 = AXIS2_PLACEMENT_3D('',#181447,#181448,#181449); +#181447 = CARTESIAN_POINT('',(-0.7,-1.9,1.705)); +#181448 = DIRECTION('',(0.,1.,0.)); +#181449 = DIRECTION('',(-4.285034420285E-32,0.,1.)); +#181450 = ADVANCED_FACE('',(#181451),#181567,.T.); +#181451 = FACE_BOUND('',#181452,.T.); +#181452 = EDGE_LOOP('',(#181453,#181461,#181462,#181463,#181471,#181479, + #181487,#181495,#181504,#181512,#181520,#181528,#181537,#181545, + #181553,#181561)); +#181453 = ORIENTED_EDGE('',*,*,#181454,.T.); +#181454 = EDGE_CURVE('',#181455,#180975,#181457,.T.); +#181455 = VERTEX_POINT('',#181456); +#181456 = CARTESIAN_POINT('',(0.842105263158,-2.,0.35)); +#181457 = LINE('',#181458,#181459); +#181458 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181459 = VECTOR('',#181460,1.); +#181460 = DIRECTION('',(-1.,0.,0.)); +#181461 = ORIENTED_EDGE('',*,*,#180974,.F.); +#181462 = ORIENTED_EDGE('',*,*,#180440,.T.); +#181463 = ORIENTED_EDGE('',*,*,#181464,.T.); +#181464 = EDGE_CURVE('',#180441,#181465,#181467,.T.); +#181465 = VERTEX_POINT('',#181466); +#181466 = CARTESIAN_POINT('',(0.864864864865,2.,0.35)); +#181467 = LINE('',#181468,#181469); +#181468 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#181469 = VECTOR('',#181470,1.); +#181470 = DIRECTION('',(1.,0.,0.)); +#181471 = ORIENTED_EDGE('',*,*,#181472,.T.); +#181472 = EDGE_CURVE('',#181465,#181473,#181475,.T.); +#181473 = VERTEX_POINT('',#181474); +#181474 = CARTESIAN_POINT('',(1.028571428571,2.,0.35)); +#181475 = LINE('',#181476,#181477); +#181476 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#181477 = VECTOR('',#181478,1.); +#181478 = DIRECTION('',(1.,0.,0.)); +#181479 = ORIENTED_EDGE('',*,*,#181480,.T.); +#181480 = EDGE_CURVE('',#181473,#181481,#181483,.T.); +#181481 = VERTEX_POINT('',#181482); +#181482 = CARTESIAN_POINT('',(1.714285714286,2.,0.35)); +#181483 = LINE('',#181484,#181485); +#181484 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#181485 = VECTOR('',#181486,1.); +#181486 = DIRECTION('',(1.,0.,0.)); +#181487 = ORIENTED_EDGE('',*,*,#181488,.T.); +#181488 = EDGE_CURVE('',#181481,#181489,#181491,.T.); +#181489 = VERTEX_POINT('',#181490); +#181490 = CARTESIAN_POINT('',(1.75,2.,0.35)); +#181491 = LINE('',#181492,#181493); +#181492 = CARTESIAN_POINT('',(-1.75,2.,0.35)); +#181493 = VECTOR('',#181494,1.); +#181494 = DIRECTION('',(1.,0.,0.)); +#181495 = ORIENTED_EDGE('',*,*,#181496,.F.); +#181496 = EDGE_CURVE('',#181497,#181489,#181499,.T.); +#181497 = VERTEX_POINT('',#181498); +#181498 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#181499 = CIRCLE('',#181500,0.25); +#181500 = AXIS2_PLACEMENT_3D('',#181501,#181502,#181503); +#181501 = CARTESIAN_POINT('',(1.75,1.75,0.35)); +#181502 = DIRECTION('',(0.,0.,1.)); +#181503 = DIRECTION('',(1.,0.,-0.)); +#181504 = ORIENTED_EDGE('',*,*,#181505,.T.); +#181505 = EDGE_CURVE('',#181497,#181506,#181508,.T.); +#181506 = VERTEX_POINT('',#181507); +#181507 = CARTESIAN_POINT('',(2.,1.714285714286,0.35)); +#181508 = LINE('',#181509,#181510); +#181509 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#181510 = VECTOR('',#181511,1.); +#181511 = DIRECTION('',(0.,-1.,0.)); +#181512 = ORIENTED_EDGE('',*,*,#181513,.T.); +#181513 = EDGE_CURVE('',#181506,#181514,#181516,.T.); +#181514 = VERTEX_POINT('',#181515); +#181515 = CARTESIAN_POINT('',(2.,-1.714285714286,0.35)); +#181516 = LINE('',#181517,#181518); +#181517 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#181518 = VECTOR('',#181519,1.); +#181519 = DIRECTION('',(0.,-1.,0.)); +#181520 = ORIENTED_EDGE('',*,*,#181521,.T.); +#181521 = EDGE_CURVE('',#181514,#181522,#181524,.T.); +#181522 = VERTEX_POINT('',#181523); +#181523 = CARTESIAN_POINT('',(2.,-1.75,0.35)); +#181524 = LINE('',#181525,#181526); +#181525 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#181526 = VECTOR('',#181527,1.); +#181527 = DIRECTION('',(0.,-1.,0.)); +#181528 = ORIENTED_EDGE('',*,*,#181529,.F.); +#181529 = EDGE_CURVE('',#181530,#181522,#181532,.T.); +#181530 = VERTEX_POINT('',#181531); +#181531 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181532 = CIRCLE('',#181533,0.25); +#181533 = AXIS2_PLACEMENT_3D('',#181534,#181535,#181536); +#181534 = CARTESIAN_POINT('',(1.75,-1.75,0.35)); +#181535 = DIRECTION('',(0.,0.,1.)); +#181536 = DIRECTION('',(1.,0.,-0.)); +#181537 = ORIENTED_EDGE('',*,*,#181538,.T.); +#181538 = EDGE_CURVE('',#181530,#181539,#181541,.T.); +#181539 = VERTEX_POINT('',#181540); +#181540 = CARTESIAN_POINT('',(1.714285714286,-2.,0.35)); +#181541 = LINE('',#181542,#181543); +#181542 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181543 = VECTOR('',#181544,1.); +#181544 = DIRECTION('',(-1.,0.,0.)); +#181545 = ORIENTED_EDGE('',*,*,#181546,.T.); +#181546 = EDGE_CURVE('',#181539,#181547,#181549,.T.); +#181547 = VERTEX_POINT('',#181548); +#181548 = CARTESIAN_POINT('',(1.028571428571,-2.,0.35)); +#181549 = LINE('',#181550,#181551); +#181550 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181551 = VECTOR('',#181552,1.); +#181552 = DIRECTION('',(-1.,0.,0.)); +#181553 = ORIENTED_EDGE('',*,*,#181554,.T.); +#181554 = EDGE_CURVE('',#181547,#181555,#181557,.T.); +#181555 = VERTEX_POINT('',#181556); +#181556 = CARTESIAN_POINT('',(0.864864864865,-2.,0.35)); +#181557 = LINE('',#181558,#181559); +#181558 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181559 = VECTOR('',#181560,1.); +#181560 = DIRECTION('',(-1.,0.,0.)); +#181561 = ORIENTED_EDGE('',*,*,#181562,.T.); +#181562 = EDGE_CURVE('',#181555,#181455,#181563,.T.); +#181563 = LINE('',#181564,#181565); +#181564 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181565 = VECTOR('',#181566,1.); +#181566 = DIRECTION('',(-1.,0.,0.)); +#181567 = PLANE('',#181568); +#181568 = AXIS2_PLACEMENT_3D('',#181569,#181570,#181571); +#181569 = CARTESIAN_POINT('',(-1.873819522781E-16,-1.606131019526E-17, + 0.35)); +#181570 = DIRECTION('',(-2.985720343766E-33,-4.405161162934E-34,-1.)); +#181571 = DIRECTION('',(-1.,0.,2.985720343766E-33)); +#181572 = ADVANCED_FACE('',(#181573),#181583,.F.); +#181573 = FACE_BOUND('',#181574,.F.); +#181574 = EDGE_LOOP('',(#181575,#181576,#181581,#181582)); +#181575 = ORIENTED_EDGE('',*,*,#181464,.T.); +#181576 = ORIENTED_EDGE('',*,*,#181577,.T.); +#181577 = EDGE_CURVE('',#181465,#180485,#181578,.T.); +#181578 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#181579,#181580), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#181579 = CARTESIAN_POINT('',(0.864864864865,2.,0.35)); +#181580 = CARTESIAN_POINT('',(0.8,1.85,1.45)); +#181581 = ORIENTED_EDGE('',*,*,#180492,.F.); +#181582 = ORIENTED_EDGE('',*,*,#180448,.F.); +#181583 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#181584,#181585) + ,(#181586,#181587 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,5.E-02),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#181584 = CARTESIAN_POINT('',(0.842105263158,2.,0.35)); +#181585 = CARTESIAN_POINT('',(0.8,1.9,1.45)); +#181586 = CARTESIAN_POINT('',(0.864864864865,2.,0.35)); +#181587 = CARTESIAN_POINT('',(0.8,1.85,1.45)); +#181588 = ADVANCED_FACE('',(#181589),#181608,.F.); +#181589 = FACE_BOUND('',#181590,.F.); +#181590 = EDGE_LOOP('',(#181591,#181600,#181606,#181607)); +#181591 = ORIENTED_EDGE('',*,*,#181592,.T.); +#181592 = EDGE_CURVE('',#180485,#181593,#181595,.T.); +#181593 = VERTEX_POINT('',#181594); +#181594 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#181595 = CIRCLE('',#181596,0.1); +#181596 = AXIS2_PLACEMENT_3D('',#181597,#181598,#181599); +#181597 = CARTESIAN_POINT('',(0.9,1.85,1.45)); +#181598 = DIRECTION('',(0.,0.,1.)); +#181599 = DIRECTION('',(1.,0.,-0.)); +#181600 = ORIENTED_EDGE('',*,*,#181601,.T.); +#181601 = EDGE_CURVE('',#181593,#181049,#181602,.T.); +#181602 = LINE('',#181603,#181604); +#181603 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#181604 = VECTOR('',#181605,1.); +#181605 = DIRECTION('',(0.,0.,1.)); +#181606 = ORIENTED_EDGE('',*,*,#181057,.F.); +#181607 = ORIENTED_EDGE('',*,*,#180484,.F.); +#181608 = CYLINDRICAL_SURFACE('',#181609,0.1); +#181609 = AXIS2_PLACEMENT_3D('',#181610,#181611,#181612); +#181610 = CARTESIAN_POINT('',(0.9,1.85,1.45)); +#181611 = DIRECTION('',(-0.,-0.,-1.)); +#181612 = DIRECTION('',(1.,0.,0.)); +#181613 = ADVANCED_FACE('',(#181614),#181632,.T.); +#181614 = FACE_BOUND('',#181615,.T.); +#181615 = EDGE_LOOP('',(#181616,#181617,#181618,#181619,#181625,#181626) + ); +#181616 = ORIENTED_EDGE('',*,*,#180918,.T.); +#181617 = ORIENTED_EDGE('',*,*,#180532,.T.); +#181618 = ORIENTED_EDGE('',*,*,#180568,.T.); +#181619 = ORIENTED_EDGE('',*,*,#181620,.T.); +#181620 = EDGE_CURVE('',#180569,#181269,#181621,.T.); +#181621 = LINE('',#181622,#181623); +#181622 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#181623 = VECTOR('',#181624,1.); +#181624 = DIRECTION('',(0.,0.,1.)); +#181625 = ORIENTED_EDGE('',*,*,#181279,.T.); +#181626 = ORIENTED_EDGE('',*,*,#181627,.F.); +#181627 = EDGE_CURVE('',#180896,#181221,#181628,.T.); +#181628 = LINE('',#181629,#181630); +#181629 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#181630 = VECTOR('',#181631,1.); +#181631 = DIRECTION('',(0.,0.,1.)); +#181632 = CYLINDRICAL_SURFACE('',#181633,0.25); +#181633 = AXIS2_PLACEMENT_3D('',#181634,#181635,#181636); +#181634 = CARTESIAN_POINT('',(-1.5,-1.5,1.45)); +#181635 = DIRECTION('',(-0.,-0.,-1.)); +#181636 = DIRECTION('',(1.,0.,0.)); +#181637 = ADVANCED_FACE('',(#181638),#181649,.F.); +#181638 = FACE_BOUND('',#181639,.F.); +#181639 = EDGE_LOOP('',(#181640,#181641,#181642,#181648)); +#181640 = ORIENTED_EDGE('',*,*,#181620,.T.); +#181641 = ORIENTED_EDGE('',*,*,#181322,.F.); +#181642 = ORIENTED_EDGE('',*,*,#181643,.F.); +#181643 = EDGE_CURVE('',#180599,#181323,#181644,.T.); +#181644 = LINE('',#181645,#181646); +#181645 = CARTESIAN_POINT('',(-0.9,-1.75,1.45)); +#181646 = VECTOR('',#181647,1.); +#181647 = DIRECTION('',(0.,0.,1.)); +#181648 = ORIENTED_EDGE('',*,*,#180598,.F.); +#181649 = PLANE('',#181650); +#181650 = AXIS2_PLACEMENT_3D('',#181651,#181652,#181653); +#181651 = CARTESIAN_POINT('',(-1.5,-1.75,1.45)); +#181652 = DIRECTION('',(0.,1.,0.)); +#181653 = DIRECTION('',(1.,0.,0.)); +#181654 = ADVANCED_FACE('',(#181655),#181666,.F.); +#181655 = FACE_BOUND('',#181656,.F.); +#181656 = EDGE_LOOP('',(#181657,#181658,#181659,#181660)); +#181657 = ORIENTED_EDGE('',*,*,#180621,.T.); +#181658 = ORIENTED_EDGE('',*,*,#181643,.T.); +#181659 = ORIENTED_EDGE('',*,*,#181381,.F.); +#181660 = ORIENTED_EDGE('',*,*,#181661,.F.); +#181661 = EDGE_CURVE('',#180622,#181371,#181662,.T.); +#181662 = LINE('',#181663,#181664); +#181663 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#181664 = VECTOR('',#181665,1.); +#181665 = DIRECTION('',(0.,0.,1.)); +#181666 = CYLINDRICAL_SURFACE('',#181667,0.1); +#181667 = AXIS2_PLACEMENT_3D('',#181668,#181669,#181670); +#181668 = CARTESIAN_POINT('',(-0.9,-1.85,1.45)); +#181669 = DIRECTION('',(-0.,-0.,-1.)); +#181670 = DIRECTION('',(1.,0.,0.)); +#181671 = ADVANCED_FACE('',(#181672),#181683,.F.); +#181672 = FACE_BOUND('',#181673,.F.); +#181673 = EDGE_LOOP('',(#181674,#181675,#181676,#181682)); +#181674 = ORIENTED_EDGE('',*,*,#181661,.T.); +#181675 = ORIENTED_EDGE('',*,*,#181431,.F.); +#181676 = ORIENTED_EDGE('',*,*,#181677,.F.); +#181677 = EDGE_CURVE('',#180658,#181432,#181678,.T.); +#181678 = LINE('',#181679,#181680); +#181679 = CARTESIAN_POINT('',(-0.8,-1.9,1.45)); +#181680 = VECTOR('',#181681,1.); +#181681 = DIRECTION('',(0.,0.,1.)); +#181682 = ORIENTED_EDGE('',*,*,#180657,.F.); +#181683 = PLANE('',#181684); +#181684 = AXIS2_PLACEMENT_3D('',#181685,#181686,#181687); +#181685 = CARTESIAN_POINT('',(-0.8,-1.85,1.45)); +#181686 = DIRECTION('',(1.,0.,0.)); +#181687 = DIRECTION('',(0.,-1.,0.)); +#181688 = ADVANCED_FACE('',(#181689),#181714,.T.); +#181689 = FACE_BOUND('',#181690,.T.); +#181690 = EDGE_LOOP('',(#181691,#181692,#181700,#181706,#181707,#181708) + ); +#181691 = ORIENTED_EDGE('',*,*,#180982,.T.); +#181692 = ORIENTED_EDGE('',*,*,#181693,.T.); +#181693 = EDGE_CURVE('',#180975,#181694,#181696,.T.); +#181694 = VERTEX_POINT('',#181695); +#181695 = CARTESIAN_POINT('',(0.7,-2.,0.35)); +#181696 = LINE('',#181697,#181698); +#181697 = CARTESIAN_POINT('',(0.8,-2.,0.35)); +#181698 = VECTOR('',#181699,1.); +#181699 = DIRECTION('',(-1.,0.,0.)); +#181700 = ORIENTED_EDGE('',*,*,#181701,.T.); +#181701 = EDGE_CURVE('',#181694,#180679,#181702,.T.); +#181702 = LINE('',#181703,#181704); +#181703 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#181704 = VECTOR('',#181705,1.); +#181705 = DIRECTION('',(-1.,0.,0.)); +#181706 = ORIENTED_EDGE('',*,*,#180678,.T.); +#181707 = ORIENTED_EDGE('',*,*,#180722,.F.); +#181708 = ORIENTED_EDGE('',*,*,#181709,.F.); +#181709 = EDGE_CURVE('',#180983,#180723,#181710,.T.); +#181710 = LINE('',#181711,#181712); +#181711 = CARTESIAN_POINT('',(0.8,-2.,0.1)); +#181712 = VECTOR('',#181713,1.); +#181713 = DIRECTION('',(-1.,0.,0.)); +#181714 = PLANE('',#181715); +#181715 = AXIS2_PLACEMENT_3D('',#181716,#181717,#181718); +#181716 = CARTESIAN_POINT('',(0.8,-2.,0.)); +#181717 = DIRECTION('',(0.,-1.,0.)); +#181718 = DIRECTION('',(-1.,0.,0.)); +#181719 = ADVANCED_FACE('',(#181720),#181737,.T.); +#181720 = FACE_BOUND('',#181721,.T.); +#181721 = EDGE_LOOP('',(#181722,#181723,#181729,#181736)); +#181722 = ORIENTED_EDGE('',*,*,#180688,.T.); +#181723 = ORIENTED_EDGE('',*,*,#181724,.T.); +#181724 = EDGE_CURVE('',#180689,#181398,#181725,.T.); +#181725 = LINE('',#181726,#181727); +#181726 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#181727 = VECTOR('',#181728,1.); +#181728 = DIRECTION('',(0.,0.,1.)); +#181729 = ORIENTED_EDGE('',*,*,#181730,.T.); +#181730 = EDGE_CURVE('',#181398,#181432,#181731,.T.); +#181731 = CIRCLE('',#181732,0.1); +#181732 = AXIS2_PLACEMENT_3D('',#181733,#181734,#181735); +#181733 = CARTESIAN_POINT('',(-0.7,-1.9,1.705)); +#181734 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#181735 = DIRECTION('',(4.285034420285E-32,-1.,1.5407922168E-32)); +#181736 = ORIENTED_EDGE('',*,*,#181677,.F.); +#181737 = CYLINDRICAL_SURFACE('',#181738,0.1); +#181738 = AXIS2_PLACEMENT_3D('',#181739,#181740,#181741); +#181739 = CARTESIAN_POINT('',(-0.7,-1.9,1.45)); +#181740 = DIRECTION('',(-0.,-0.,-1.)); +#181741 = DIRECTION('',(1.,0.,0.)); +#181742 = ADVANCED_FACE('',(#181743),#181760,.F.); +#181743 = FACE_BOUND('',#181744,.F.); +#181744 = EDGE_LOOP('',(#181745,#181746,#181747,#181755)); +#181745 = ORIENTED_EDGE('',*,*,#181701,.T.); +#181746 = ORIENTED_EDGE('',*,*,#180697,.T.); +#181747 = ORIENTED_EDGE('',*,*,#181748,.T.); +#181748 = EDGE_CURVE('',#180689,#181749,#181751,.T.); +#181749 = VERTEX_POINT('',#181750); +#181750 = CARTESIAN_POINT('',(0.7,-2.,1.45)); +#181751 = LINE('',#181752,#181753); +#181752 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#181753 = VECTOR('',#181754,1.); +#181754 = DIRECTION('',(1.,0.,0.)); +#181755 = ORIENTED_EDGE('',*,*,#181756,.F.); +#181756 = EDGE_CURVE('',#181694,#181749,#181757,.T.); +#181757 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#181758,#181759), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#181758 = CARTESIAN_POINT('',(0.7,-2.,0.35)); +#181759 = CARTESIAN_POINT('',(0.7,-2.,1.45)); +#181760 = PLANE('',#181761); +#181761 = AXIS2_PLACEMENT_3D('',#181762,#181763,#181764); +#181762 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#181763 = DIRECTION('',(0.,1.,0.)); +#181764 = DIRECTION('',(-1.,0.,0.)); +#181765 = ADVANCED_FACE('',(#181766),#181785,.T.); +#181766 = FACE_BOUND('',#181767,.T.); +#181767 = EDGE_LOOP('',(#181768,#181769,#181770,#181778)); +#181768 = ORIENTED_EDGE('',*,*,#180732,.T.); +#181769 = ORIENTED_EDGE('',*,*,#180958,.T.); +#181770 = ORIENTED_EDGE('',*,*,#181771,.F.); +#181771 = EDGE_CURVE('',#181772,#180951,#181774,.T.); +#181772 = VERTEX_POINT('',#181773); +#181773 = CARTESIAN_POINT('',(-0.7,-1.9,-1.387778780781E-17)); +#181774 = LINE('',#181775,#181776); +#181775 = CARTESIAN_POINT('',(-0.7,-2.,-1.387778780781E-17)); +#181776 = VECTOR('',#181777,1.); +#181777 = DIRECTION('',(0.,1.,0.)); +#181778 = ORIENTED_EDGE('',*,*,#181779,.T.); +#181779 = EDGE_CURVE('',#181772,#180723,#181780,.T.); +#181780 = ELLIPSE('',#181781,0.141421356237,0.1); +#181781 = AXIS2_PLACEMENT_3D('',#181782,#181783,#181784); +#181782 = CARTESIAN_POINT('',(-0.7,-1.9,0.1)); +#181783 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#181784 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#181785 = CYLINDRICAL_SURFACE('',#181786,0.1); +#181786 = AXIS2_PLACEMENT_3D('',#181787,#181788,#181789); +#181787 = CARTESIAN_POINT('',(-0.7,-2.,0.1)); +#181788 = DIRECTION('',(0.,1.,0.)); +#181789 = DIRECTION('',(-1.,0.,0.)); +#181790 = ADVANCED_FACE('',(#181791),#181804,.T.); +#181791 = FACE_BOUND('',#181792,.T.); +#181792 = EDGE_LOOP('',(#181793,#181794,#181795,#181796,#181802,#181803) + ); +#181793 = ORIENTED_EDGE('',*,*,#180799,.T.); +#181794 = ORIENTED_EDGE('',*,*,#180829,.T.); +#181795 = ORIENTED_EDGE('',*,*,#180865,.T.); +#181796 = ORIENTED_EDGE('',*,*,#181797,.T.); +#181797 = EDGE_CURVE('',#180866,#181167,#181798,.T.); +#181798 = LINE('',#181799,#181800); +#181799 = CARTESIAN_POINT('',(-1.75,1.5,1.45)); +#181800 = VECTOR('',#181801,1.); +#181801 = DIRECTION('',(0.,0.,1.)); +#181802 = ORIENTED_EDGE('',*,*,#181177,.T.); +#181803 = ORIENTED_EDGE('',*,*,#181004,.F.); +#181804 = CYLINDRICAL_SURFACE('',#181805,0.25); +#181805 = AXIS2_PLACEMENT_3D('',#181806,#181807,#181808); +#181806 = CARTESIAN_POINT('',(-1.5,1.5,1.45)); +#181807 = DIRECTION('',(-0.,-0.,-1.)); +#181808 = DIRECTION('',(1.,0.,0.)); +#181809 = ADVANCED_FACE('',(#181810),#181816,.T.); +#181810 = FACE_BOUND('',#181811,.T.); +#181811 = EDGE_LOOP('',(#181812,#181813,#181814,#181815)); +#181812 = ORIENTED_EDGE('',*,*,#181627,.T.); +#181813 = ORIENTED_EDGE('',*,*,#181220,.T.); +#181814 = ORIENTED_EDGE('',*,*,#181797,.F.); +#181815 = ORIENTED_EDGE('',*,*,#180895,.F.); +#181816 = PLANE('',#181817); +#181817 = AXIS2_PLACEMENT_3D('',#181818,#181819,#181820); +#181818 = CARTESIAN_POINT('',(-1.75,-1.5,1.45)); +#181819 = DIRECTION('',(-1.,0.,0.)); +#181820 = DIRECTION('',(0.,1.,0.)); +#181821 = ADVANCED_FACE('',(#181822),#181840,.T.); +#181822 = FACE_BOUND('',#181823,.T.); +#181823 = EDGE_LOOP('',(#181824,#181825,#181833,#181839)); +#181824 = ORIENTED_EDGE('',*,*,#180950,.T.); +#181825 = ORIENTED_EDGE('',*,*,#181826,.T.); +#181826 = EDGE_CURVE('',#180942,#181827,#181829,.T.); +#181827 = VERTEX_POINT('',#181828); +#181828 = CARTESIAN_POINT('',(0.7,-1.9,-1.387778780781E-17)); +#181829 = LINE('',#181830,#181831); +#181830 = CARTESIAN_POINT('',(0.7,2.,-1.387778780781E-17)); +#181831 = VECTOR('',#181832,1.); +#181832 = DIRECTION('',(0.,-1.,0.)); +#181833 = ORIENTED_EDGE('',*,*,#181834,.T.); +#181834 = EDGE_CURVE('',#181827,#181772,#181835,.T.); +#181835 = LINE('',#181836,#181837); +#181836 = CARTESIAN_POINT('',(0.8,-1.9,-1.387778780781E-17)); +#181837 = VECTOR('',#181838,1.); +#181838 = DIRECTION('',(-1.,0.,0.)); +#181839 = ORIENTED_EDGE('',*,*,#181771,.T.); +#181840 = PLANE('',#181841); +#181841 = AXIS2_PLACEMENT_3D('',#181842,#181843,#181844); +#181842 = CARTESIAN_POINT('',(0.,0.,0.)); +#181843 = DIRECTION('',(-0.,-0.,-1.)); +#181844 = DIRECTION('',(-1.,0.,0.)); +#181845 = ADVANCED_FACE('',(#181846),#181858,.T.); +#181846 = FACE_BOUND('',#181847,.T.); +#181847 = EDGE_LOOP('',(#181848,#181849,#181856,#181857)); +#181848 = ORIENTED_EDGE('',*,*,#180990,.T.); +#181849 = ORIENTED_EDGE('',*,*,#181850,.T.); +#181850 = EDGE_CURVE('',#180983,#181827,#181851,.T.); +#181851 = ELLIPSE('',#181852,0.141421356237,0.1); +#181852 = AXIS2_PLACEMENT_3D('',#181853,#181854,#181855); +#181853 = CARTESIAN_POINT('',(0.7,-1.9,0.1)); +#181854 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#181855 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#181856 = ORIENTED_EDGE('',*,*,#181826,.F.); +#181857 = ORIENTED_EDGE('',*,*,#180941,.F.); +#181858 = CYLINDRICAL_SURFACE('',#181859,0.1); +#181859 = AXIS2_PLACEMENT_3D('',#181860,#181861,#181862); +#181860 = CARTESIAN_POINT('',(0.7,2.,0.1)); +#181861 = DIRECTION('',(0.,-1.,0.)); +#181862 = DIRECTION('',(1.,0.,0.)); +#181863 = ADVANCED_FACE('',(#181864),#181882,.T.); +#181864 = FACE_BOUND('',#181865,.T.); +#181865 = EDGE_LOOP('',(#181866,#181867,#181868,#181876)); +#181866 = ORIENTED_EDGE('',*,*,#181601,.T.); +#181867 = ORIENTED_EDGE('',*,*,#181082,.T.); +#181868 = ORIENTED_EDGE('',*,*,#181869,.F.); +#181869 = EDGE_CURVE('',#181870,#181074,#181872,.T.); +#181870 = VERTEX_POINT('',#181871); +#181871 = CARTESIAN_POINT('',(1.5,1.75,1.45)); +#181872 = LINE('',#181873,#181874); +#181873 = CARTESIAN_POINT('',(1.5,1.75,1.45)); +#181874 = VECTOR('',#181875,1.); +#181875 = DIRECTION('',(0.,0.,1.)); +#181876 = ORIENTED_EDGE('',*,*,#181877,.F.); +#181877 = EDGE_CURVE('',#181593,#181870,#181878,.T.); +#181878 = LINE('',#181879,#181880); +#181879 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#181880 = VECTOR('',#181881,1.); +#181881 = DIRECTION('',(1.,0.,0.)); +#181882 = PLANE('',#181883); +#181883 = AXIS2_PLACEMENT_3D('',#181884,#181885,#181886); +#181884 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#181885 = DIRECTION('',(0.,1.,0.)); +#181886 = DIRECTION('',(1.,0.,0.)); +#181887 = ADVANCED_FACE('',(#181888),#181925,.T.); +#181888 = FACE_BOUND('',#181889,.T.); +#181889 = EDGE_LOOP('',(#181890,#181901,#181910,#181917,#181918,#181919) + ); +#181890 = ORIENTED_EDGE('',*,*,#181891,.T.); +#181891 = EDGE_CURVE('',#181892,#181894,#181896,.T.); +#181892 = VERTEX_POINT('',#181893); +#181893 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#181894 = VERTEX_POINT('',#181895); +#181895 = CARTESIAN_POINT('',(1.748229458184,1.529700775911,1.45)); +#181896 = CIRCLE('',#181897,0.25); +#181897 = AXIS2_PLACEMENT_3D('',#181898,#181899,#181900); +#181898 = CARTESIAN_POINT('',(1.5,1.5,1.45)); +#181899 = DIRECTION('',(0.,0.,1.)); +#181900 = DIRECTION('',(1.,0.,-0.)); +#181901 = ORIENTED_EDGE('',*,*,#181902,.T.); +#181902 = EDGE_CURVE('',#181894,#181903,#181905,.T.); +#181903 = VERTEX_POINT('',#181904); +#181904 = CARTESIAN_POINT('',(1.529700775911,1.748229458184,1.45)); +#181905 = CIRCLE('',#181906,0.25); +#181906 = AXIS2_PLACEMENT_3D('',#181907,#181908,#181909); +#181907 = CARTESIAN_POINT('',(1.5,1.5,1.45)); +#181908 = DIRECTION('',(0.,0.,1.)); +#181909 = DIRECTION('',(1.,0.,-0.)); +#181910 = ORIENTED_EDGE('',*,*,#181911,.T.); +#181911 = EDGE_CURVE('',#181903,#181870,#181912,.T.); +#181912 = CIRCLE('',#181913,0.25); +#181913 = AXIS2_PLACEMENT_3D('',#181914,#181915,#181916); +#181914 = CARTESIAN_POINT('',(1.5,1.5,1.45)); +#181915 = DIRECTION('',(0.,0.,1.)); +#181916 = DIRECTION('',(1.,0.,-0.)); +#181917 = ORIENTED_EDGE('',*,*,#181869,.T.); +#181918 = ORIENTED_EDGE('',*,*,#181108,.T.); +#181919 = ORIENTED_EDGE('',*,*,#181920,.F.); +#181920 = EDGE_CURVE('',#181892,#181100,#181921,.T.); +#181921 = LINE('',#181922,#181923); +#181922 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#181923 = VECTOR('',#181924,1.); +#181924 = DIRECTION('',(0.,0.,1.)); +#181925 = CYLINDRICAL_SURFACE('',#181926,0.25); +#181926 = AXIS2_PLACEMENT_3D('',#181927,#181928,#181929); +#181927 = CARTESIAN_POINT('',(1.5,1.5,1.45)); +#181928 = DIRECTION('',(-0.,-0.,-1.)); +#181929 = DIRECTION('',(1.,0.,0.)); +#181930 = ADVANCED_FACE('',(#181931),#181949,.T.); +#181931 = FACE_BOUND('',#181932,.T.); +#181932 = EDGE_LOOP('',(#181933,#181934,#181935,#181943)); +#181933 = ORIENTED_EDGE('',*,*,#181920,.T.); +#181934 = ORIENTED_EDGE('',*,*,#181151,.T.); +#181935 = ORIENTED_EDGE('',*,*,#181936,.F.); +#181936 = EDGE_CURVE('',#181937,#181143,#181939,.T.); +#181937 = VERTEX_POINT('',#181938); +#181938 = CARTESIAN_POINT('',(1.75,-1.5,1.45)); +#181939 = LINE('',#181940,#181941); +#181940 = CARTESIAN_POINT('',(1.75,-1.5,1.45)); +#181941 = VECTOR('',#181942,1.); +#181942 = DIRECTION('',(0.,0.,1.)); +#181943 = ORIENTED_EDGE('',*,*,#181944,.F.); +#181944 = EDGE_CURVE('',#181892,#181937,#181945,.T.); +#181945 = LINE('',#181946,#181947); +#181946 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#181947 = VECTOR('',#181948,1.); +#181948 = DIRECTION('',(0.,-1.,0.)); +#181949 = PLANE('',#181950); +#181950 = AXIS2_PLACEMENT_3D('',#181951,#181952,#181953); +#181951 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#181952 = DIRECTION('',(1.,0.,0.)); +#181953 = DIRECTION('',(0.,-1.,0.)); +#181954 = ADVANCED_FACE('',(#181955),#181992,.T.); +#181955 = FACE_BOUND('',#181956,.T.); +#181956 = EDGE_LOOP('',(#181957,#181968,#181977,#181984,#181985,#181986) + ); +#181957 = ORIENTED_EDGE('',*,*,#181958,.T.); +#181958 = EDGE_CURVE('',#181959,#181961,#181963,.T.); +#181959 = VERTEX_POINT('',#181960); +#181960 = CARTESIAN_POINT('',(1.5,-1.75,1.45)); +#181961 = VERTEX_POINT('',#181962); +#181962 = CARTESIAN_POINT('',(1.529700775911,-1.748229458184,1.45)); +#181963 = CIRCLE('',#181964,0.25); +#181964 = AXIS2_PLACEMENT_3D('',#181965,#181966,#181967); +#181965 = CARTESIAN_POINT('',(1.5,-1.5,1.45)); +#181966 = DIRECTION('',(0.,0.,1.)); +#181967 = DIRECTION('',(1.,0.,-0.)); +#181968 = ORIENTED_EDGE('',*,*,#181969,.T.); +#181969 = EDGE_CURVE('',#181961,#181970,#181972,.T.); +#181970 = VERTEX_POINT('',#181971); +#181971 = CARTESIAN_POINT('',(1.748229458184,-1.529700775911,1.45)); +#181972 = CIRCLE('',#181973,0.25); +#181973 = AXIS2_PLACEMENT_3D('',#181974,#181975,#181976); +#181974 = CARTESIAN_POINT('',(1.5,-1.5,1.45)); +#181975 = DIRECTION('',(0.,0.,1.)); +#181976 = DIRECTION('',(1.,0.,-0.)); +#181977 = ORIENTED_EDGE('',*,*,#181978,.T.); +#181978 = EDGE_CURVE('',#181970,#181937,#181979,.T.); +#181979 = CIRCLE('',#181980,0.25); +#181980 = AXIS2_PLACEMENT_3D('',#181981,#181982,#181983); +#181981 = CARTESIAN_POINT('',(1.5,-1.5,1.45)); +#181982 = DIRECTION('',(0.,0.,1.)); +#181983 = DIRECTION('',(1.,0.,-0.)); +#181984 = ORIENTED_EDGE('',*,*,#181936,.T.); +#181985 = ORIENTED_EDGE('',*,*,#181203,.T.); +#181986 = ORIENTED_EDGE('',*,*,#181987,.F.); +#181987 = EDGE_CURVE('',#181959,#181195,#181988,.T.); +#181988 = LINE('',#181989,#181990); +#181989 = CARTESIAN_POINT('',(1.5,-1.75,1.45)); +#181990 = VECTOR('',#181991,1.); +#181991 = DIRECTION('',(0.,0.,1.)); +#181992 = CYLINDRICAL_SURFACE('',#181993,0.25); +#181993 = AXIS2_PLACEMENT_3D('',#181994,#181995,#181996); +#181994 = CARTESIAN_POINT('',(1.5,-1.5,1.45)); +#181995 = DIRECTION('',(-0.,-0.,-1.)); +#181996 = DIRECTION('',(1.,0.,0.)); +#181997 = ADVANCED_FACE('',(#181998),#182016,.F.); +#181998 = FACE_BOUND('',#181999,.F.); +#181999 = EDGE_LOOP('',(#182000,#182008,#182009,#182010)); +#182000 = ORIENTED_EDGE('',*,*,#182001,.T.); +#182001 = EDGE_CURVE('',#182002,#181245,#182004,.T.); +#182002 = VERTEX_POINT('',#182003); +#182003 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182004 = LINE('',#182005,#182006); +#182005 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182006 = VECTOR('',#182007,1.); +#182007 = DIRECTION('',(0.,0.,1.)); +#182008 = ORIENTED_EDGE('',*,*,#181253,.F.); +#182009 = ORIENTED_EDGE('',*,*,#181987,.F.); +#182010 = ORIENTED_EDGE('',*,*,#182011,.F.); +#182011 = EDGE_CURVE('',#182002,#181959,#182012,.T.); +#182012 = LINE('',#182013,#182014); +#182013 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182014 = VECTOR('',#182015,1.); +#182015 = DIRECTION('',(1.,0.,0.)); +#182016 = PLANE('',#182017); +#182017 = AXIS2_PLACEMENT_3D('',#182018,#182019,#182020); +#182018 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182019 = DIRECTION('',(0.,1.,0.)); +#182020 = DIRECTION('',(1.,0.,0.)); +#182021 = ADVANCED_FACE('',(#182022),#182041,.F.); +#182022 = FACE_BOUND('',#182023,.F.); +#182023 = EDGE_LOOP('',(#182024,#182033,#182039,#182040)); +#182024 = ORIENTED_EDGE('',*,*,#182025,.T.); +#182025 = EDGE_CURVE('',#182002,#182026,#182028,.T.); +#182026 = VERTEX_POINT('',#182027); +#182027 = CARTESIAN_POINT('',(0.8,-1.85,1.45)); +#182028 = CIRCLE('',#182029,0.1); +#182029 = AXIS2_PLACEMENT_3D('',#182030,#182031,#182032); +#182030 = CARTESIAN_POINT('',(0.9,-1.85,1.45)); +#182031 = DIRECTION('',(0.,0.,1.)); +#182032 = DIRECTION('',(1.,0.,-0.)); +#182033 = ORIENTED_EDGE('',*,*,#182034,.T.); +#182034 = EDGE_CURVE('',#182026,#181297,#182035,.T.); +#182035 = LINE('',#182036,#182037); +#182036 = CARTESIAN_POINT('',(0.8,-1.85,1.45)); +#182037 = VECTOR('',#182038,1.); +#182038 = DIRECTION('',(0.,0.,1.)); +#182039 = ORIENTED_EDGE('',*,*,#181305,.F.); +#182040 = ORIENTED_EDGE('',*,*,#182001,.F.); +#182041 = CYLINDRICAL_SURFACE('',#182042,0.1); +#182042 = AXIS2_PLACEMENT_3D('',#182043,#182044,#182045); +#182043 = CARTESIAN_POINT('',(0.9,-1.85,1.45)); +#182044 = DIRECTION('',(-0.,-0.,-1.)); +#182045 = DIRECTION('',(1.,0.,0.)); +#182046 = ADVANCED_FACE('',(#182047),#182065,.F.); +#182047 = FACE_BOUND('',#182048,.F.); +#182048 = EDGE_LOOP('',(#182049,#182057,#182058,#182059)); +#182049 = ORIENTED_EDGE('',*,*,#182050,.T.); +#182050 = EDGE_CURVE('',#182051,#181347,#182053,.T.); +#182051 = VERTEX_POINT('',#182052); +#182052 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182053 = LINE('',#182054,#182055); +#182054 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182055 = VECTOR('',#182056,1.); +#182056 = DIRECTION('',(0.,0.,1.)); +#182057 = ORIENTED_EDGE('',*,*,#181355,.F.); +#182058 = ORIENTED_EDGE('',*,*,#182034,.F.); +#182059 = ORIENTED_EDGE('',*,*,#182060,.F.); +#182060 = EDGE_CURVE('',#182051,#182026,#182061,.T.); +#182061 = LINE('',#182062,#182063); +#182062 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182063 = VECTOR('',#182064,1.); +#182064 = DIRECTION('',(0.,1.,0.)); +#182065 = PLANE('',#182066); +#182066 = AXIS2_PLACEMENT_3D('',#182067,#182068,#182069); +#182067 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182068 = DIRECTION('',(-1.,0.,0.)); +#182069 = DIRECTION('',(0.,1.,0.)); +#182070 = ADVANCED_FACE('',(#182071),#182082,.T.); +#182071 = FACE_BOUND('',#182072,.T.); +#182072 = EDGE_LOOP('',(#182073,#182074,#182075)); +#182073 = ORIENTED_EDGE('',*,*,#181346,.F.); +#182074 = ORIENTED_EDGE('',*,*,#181414,.T.); +#182075 = ORIENTED_EDGE('',*,*,#182076,.F.); +#182076 = EDGE_CURVE('',#181347,#181407,#182077,.T.); +#182077 = CIRCLE('',#182078,0.1); +#182078 = AXIS2_PLACEMENT_3D('',#182079,#182080,#182081); +#182079 = CARTESIAN_POINT('',(0.7,-1.9,1.705)); +#182080 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#182081 = DIRECTION('',(1.,-1.5407922168E-32,4.285034420285E-32)); +#182082 = SPHERICAL_SURFACE('',#182083,0.1); +#182083 = AXIS2_PLACEMENT_3D('',#182084,#182085,#182086); +#182084 = CARTESIAN_POINT('',(0.7,-1.9,1.705)); +#182085 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#182086 = DIRECTION('',(1.,-1.5407922168E-32,4.285034420285E-32)); +#182087 = ADVANCED_FACE('',(#182088),#182099,.F.); +#182088 = FACE_BOUND('',#182089,.F.); +#182089 = EDGE_LOOP('',(#182090,#182091,#182092,#182098)); +#182090 = ORIENTED_EDGE('',*,*,#181724,.T.); +#182091 = ORIENTED_EDGE('',*,*,#181406,.F.); +#182092 = ORIENTED_EDGE('',*,*,#182093,.F.); +#182093 = EDGE_CURVE('',#181749,#181407,#182094,.T.); +#182094 = LINE('',#182095,#182096); +#182095 = CARTESIAN_POINT('',(0.7,-2.,1.45)); +#182096 = VECTOR('',#182097,1.); +#182097 = DIRECTION('',(0.,0.,1.)); +#182098 = ORIENTED_EDGE('',*,*,#181748,.F.); +#182099 = PLANE('',#182100); +#182100 = AXIS2_PLACEMENT_3D('',#182101,#182102,#182103); +#182101 = CARTESIAN_POINT('',(-0.7,-2.,1.45)); +#182102 = DIRECTION('',(0.,1.,0.)); +#182103 = DIRECTION('',(1.,0.,0.)); +#182104 = ADVANCED_FACE('',(#182105),#182110,.T.); +#182105 = FACE_BOUND('',#182106,.T.); +#182106 = EDGE_LOOP('',(#182107,#182108,#182109)); +#182107 = ORIENTED_EDGE('',*,*,#181397,.F.); +#182108 = ORIENTED_EDGE('',*,*,#181439,.T.); +#182109 = ORIENTED_EDGE('',*,*,#181730,.F.); +#182110 = SPHERICAL_SURFACE('',#182111,0.1); +#182111 = AXIS2_PLACEMENT_3D('',#182112,#182113,#182114); +#182112 = CARTESIAN_POINT('',(-0.7,-1.9,1.705)); +#182113 = DIRECTION('',(4.285034420285E-32,-1.5407922168E-32,-1.)); +#182114 = DIRECTION('',(4.285034420285E-32,-1.,1.5407922168E-32)); +#182115 = ADVANCED_FACE('',(#182116),#182133,.F.); +#182116 = FACE_BOUND('',#182117,.F.); +#182117 = EDGE_LOOP('',(#182118,#182119,#182120,#182121,#182128)); +#182118 = ORIENTED_EDGE('',*,*,#181454,.T.); +#182119 = ORIENTED_EDGE('',*,*,#181693,.T.); +#182120 = ORIENTED_EDGE('',*,*,#181756,.T.); +#182121 = ORIENTED_EDGE('',*,*,#182122,.T.); +#182122 = EDGE_CURVE('',#181749,#182051,#182123,.T.); +#182123 = CIRCLE('',#182124,0.1); +#182124 = AXIS2_PLACEMENT_3D('',#182125,#182126,#182127); +#182125 = CARTESIAN_POINT('',(0.7,-1.9,1.45)); +#182126 = DIRECTION('',(0.,0.,1.)); +#182127 = DIRECTION('',(1.,0.,-0.)); +#182128 = ORIENTED_EDGE('',*,*,#182129,.F.); +#182129 = EDGE_CURVE('',#181455,#182051,#182130,.T.); +#182130 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182131,#182132), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182131 = CARTESIAN_POINT('',(0.842105263158,-2.,0.35)); +#182132 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182133 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#182134,#182135) + ,(#182136,#182137) + ,(#182138,#182139) + ,(#182140,#182141) + ,(#182142,#182143) + ,(#182144,#182145) + ,(#182146,#182147) + ,(#182148,#182149 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(0.,1.570796326795),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#182134 = CARTESIAN_POINT('',(0.842105263158,-2.,0.35)); +#182135 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182136 = CARTESIAN_POINT('',(0.821804511278,-2.,0.35)); +#182137 = CARTESIAN_POINT('',(0.8,-1.922439947526,1.45)); +#182138 = CARTESIAN_POINT('',(0.801503759398,-2.,0.35)); +#182139 = CARTESIAN_POINT('',(0.794125111345,-1.944879786498,1.45)); +#182140 = CARTESIAN_POINT('',(0.781203007519,-2.,0.35)); +#182141 = CARTESIAN_POINT('',(0.78237627222,-1.965474694082,1.45)); +#182142 = CARTESIAN_POINT('',(0.760902255639,-2.,0.35)); +#182143 = CARTESIAN_POINT('',(0.765474694082,-1.98237627222,1.45)); +#182144 = CARTESIAN_POINT('',(0.740601503759,-2.,0.35)); +#182145 = CARTESIAN_POINT('',(0.744879786498,-1.994125111345,1.45)); +#182146 = CARTESIAN_POINT('',(0.72030075188,-2.,0.35)); +#182147 = CARTESIAN_POINT('',(0.722439947526,-2.,1.45)); +#182148 = CARTESIAN_POINT('',(0.7,-2.,0.35)); +#182149 = CARTESIAN_POINT('',(0.7,-2.,1.45)); +#182150 = ADVANCED_FACE('',(#182151),#182161,.F.); +#182151 = FACE_BOUND('',#182152,.F.); +#182152 = EDGE_LOOP('',(#182153,#182154,#182155,#182156)); +#182153 = ORIENTED_EDGE('',*,*,#181562,.T.); +#182154 = ORIENTED_EDGE('',*,*,#182129,.T.); +#182155 = ORIENTED_EDGE('',*,*,#182060,.T.); +#182156 = ORIENTED_EDGE('',*,*,#182157,.F.); +#182157 = EDGE_CURVE('',#181555,#182026,#182158,.T.); +#182158 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182159,#182160), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182159 = CARTESIAN_POINT('',(0.864864864865,-2.,0.35)); +#182160 = CARTESIAN_POINT('',(0.8,-1.85,1.45)); +#182161 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#182162,#182163) + ,(#182164,#182165 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(-5.E-02,0.),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#182162 = CARTESIAN_POINT('',(0.864864864865,-2.,0.35)); +#182163 = CARTESIAN_POINT('',(0.8,-1.85,1.45)); +#182164 = CARTESIAN_POINT('',(0.842105263158,-2.,0.35)); +#182165 = CARTESIAN_POINT('',(0.8,-1.9,1.45)); +#182166 = ADVANCED_FACE('',(#182167),#182177,.F.); +#182167 = FACE_BOUND('',#182168,.F.); +#182168 = EDGE_LOOP('',(#182169,#182170,#182171,#182172)); +#182169 = ORIENTED_EDGE('',*,*,#181554,.T.); +#182170 = ORIENTED_EDGE('',*,*,#182157,.T.); +#182171 = ORIENTED_EDGE('',*,*,#182025,.F.); +#182172 = ORIENTED_EDGE('',*,*,#182173,.F.); +#182173 = EDGE_CURVE('',#181547,#182002,#182174,.T.); +#182174 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182175,#182176), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182175 = CARTESIAN_POINT('',(1.028571428571,-2.,0.35)); +#182176 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182177 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#182178,#182179) + ,(#182180,#182181) + ,(#182182,#182183) + ,(#182184,#182185) + ,(#182186,#182187) + ,(#182188,#182189) + ,(#182190,#182191) + ,(#182192,#182193 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(1.570796326795, + 3.14159265359),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182178 = CARTESIAN_POINT('',(1.028571428571,-2.,0.35)); +#182179 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182180 = CARTESIAN_POINT('',(1.005184776613,-2.,0.35)); +#182181 = CARTESIAN_POINT('',(0.877560052474,-1.75,1.45)); +#182182 = CARTESIAN_POINT('',(0.981798124655,-2.,0.35)); +#182183 = CARTESIAN_POINT('',(0.855120213502,-1.755874888655,1.45)); +#182184 = CARTESIAN_POINT('',(0.958411472697,-2.,0.35)); +#182185 = CARTESIAN_POINT('',(0.834525305918,-1.76762372778,1.45)); +#182186 = CARTESIAN_POINT('',(0.935024820739,-2.,0.35)); +#182187 = CARTESIAN_POINT('',(0.81762372778,-1.784525305918,1.45)); +#182188 = CARTESIAN_POINT('',(0.911638168781,-2.,0.35)); +#182189 = CARTESIAN_POINT('',(0.805874888655,-1.805120213502,1.45)); +#182190 = CARTESIAN_POINT('',(0.888251516823,-2.,0.35)); +#182191 = CARTESIAN_POINT('',(0.8,-1.827560052474,1.45)); +#182192 = CARTESIAN_POINT('',(0.864864864865,-2.,0.35)); +#182193 = CARTESIAN_POINT('',(0.8,-1.85,1.45)); +#182194 = ADVANCED_FACE('',(#182195),#182205,.F.); +#182195 = FACE_BOUND('',#182196,.F.); +#182196 = EDGE_LOOP('',(#182197,#182198,#182199,#182200)); +#182197 = ORIENTED_EDGE('',*,*,#181546,.T.); +#182198 = ORIENTED_EDGE('',*,*,#182173,.T.); +#182199 = ORIENTED_EDGE('',*,*,#182011,.T.); +#182200 = ORIENTED_EDGE('',*,*,#182201,.F.); +#182201 = EDGE_CURVE('',#181539,#181959,#182202,.T.); +#182202 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182203,#182204), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182203 = CARTESIAN_POINT('',(1.714285714286,-2.,0.35)); +#182204 = CARTESIAN_POINT('',(1.5,-1.75,1.45)); +#182205 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#182206,#182207) + ,(#182208,#182209 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(3.571428571429E-02, + 0.721428571429),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182206 = CARTESIAN_POINT('',(1.714285714286,-2.,0.35)); +#182207 = CARTESIAN_POINT('',(1.5,-1.75,1.45)); +#182208 = CARTESIAN_POINT('',(1.028571428571,-2.,0.35)); +#182209 = CARTESIAN_POINT('',(0.9,-1.75,1.45)); +#182210 = ADVANCED_FACE('',(#182211),#182221,.F.); +#182211 = FACE_BOUND('',#182212,.F.); +#182212 = EDGE_LOOP('',(#182213,#182214,#182215,#182216)); +#182213 = ORIENTED_EDGE('',*,*,#181538,.T.); +#182214 = ORIENTED_EDGE('',*,*,#182201,.T.); +#182215 = ORIENTED_EDGE('',*,*,#181958,.T.); +#182216 = ORIENTED_EDGE('',*,*,#182217,.F.); +#182217 = EDGE_CURVE('',#181530,#181961,#182218,.T.); +#182218 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182219,#182220), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182219 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#182220 = CARTESIAN_POINT('',(1.529700775911,-1.748229458184,1.45)); +#182221 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#182222,#182223) + ,(#182224,#182225) + ,(#182226,#182227) + ,(#182228,#182229) + ,(#182230,#182231 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(1.451711965072, + 1.570796326795),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182222 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#182223 = CARTESIAN_POINT('',(1.529700775911,-1.748229458184,1.45)); +#182224 = CARTESIAN_POINT('',(1.741071428571,-2.,0.35)); +#182225 = CARTESIAN_POINT('',(1.522310714264,-1.749113682669,1.45)); +#182226 = CARTESIAN_POINT('',(1.732142857143,-2.,0.35)); +#182227 = CARTESIAN_POINT('',(1.514885549367,-1.749704560515,1.45)); +#182228 = CARTESIAN_POINT('',(1.723214285714,-2.,0.35)); +#182229 = CARTESIAN_POINT('',(1.507442772608,-1.75,1.45)); +#182230 = CARTESIAN_POINT('',(1.714285714286,-2.,0.35)); +#182231 = CARTESIAN_POINT('',(1.5,-1.75,1.45)); +#182232 = ADVANCED_FACE('',(#182233),#182243,.F.); +#182233 = FACE_BOUND('',#182234,.F.); +#182234 = EDGE_LOOP('',(#182235,#182236,#182237,#182238)); +#182235 = ORIENTED_EDGE('',*,*,#181529,.F.); +#182236 = ORIENTED_EDGE('',*,*,#182217,.T.); +#182237 = ORIENTED_EDGE('',*,*,#181969,.T.); +#182238 = ORIENTED_EDGE('',*,*,#182239,.F.); +#182239 = EDGE_CURVE('',#181522,#181970,#182240,.T.); +#182240 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182241,#182242), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182241 = CARTESIAN_POINT('',(2.,-1.75,0.35)); +#182242 = CARTESIAN_POINT('',(1.748229458184,-1.529700775911,1.45)); +#182243 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#182244,#182245) + ,(#182246,#182247) + ,(#182248,#182249) + ,(#182250,#182251) + ,(#182252,#182253) + ,(#182254,#182255) + ,(#182256,#182257) + ,(#182258,#182259 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(8.881784197001E-16, + 1.570796326795),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182244 = CARTESIAN_POINT('',(2.,-1.75,0.35)); +#182245 = CARTESIAN_POINT('',(1.748229458184,-1.529700775911,1.45)); +#182246 = CARTESIAN_POINT('',(2.,-1.806099868814,0.35)); +#182247 = CARTESIAN_POINT('',(1.742575161924,-1.576957551331,1.45)); +#182248 = CARTESIAN_POINT('',(1.985312778362,-1.862199466246,0.35)); +#182249 = CARTESIAN_POINT('',(1.72642483542,-1.622958407439,1.45)); +#182250 = CARTESIAN_POINT('',(1.955940680551,-1.913686735206,0.35)); +#182251 = CARTESIAN_POINT('',(1.700113819693,-1.664906447161,1.45)); +#182252 = CARTESIAN_POINT('',(1.913686735206,-1.95594068055,0.35)); +#182253 = CARTESIAN_POINT('',(1.664906447161,-1.700113819693,1.45)); +#182254 = CARTESIAN_POINT('',(1.862199466246,-1.985312778362,0.35)); +#182255 = CARTESIAN_POINT('',(1.622958407439,-1.72642483542,1.45)); +#182256 = CARTESIAN_POINT('',(1.806099868814,-2.,0.35)); +#182257 = CARTESIAN_POINT('',(1.576957551331,-1.742575161924,1.45)); +#182258 = CARTESIAN_POINT('',(1.75,-2.,0.35)); +#182259 = CARTESIAN_POINT('',(1.529700775911,-1.748229458184,1.45)); +#182260 = ADVANCED_FACE('',(#182261),#182271,.F.); +#182261 = FACE_BOUND('',#182262,.F.); +#182262 = EDGE_LOOP('',(#182263,#182264,#182265,#182266)); +#182263 = ORIENTED_EDGE('',*,*,#181521,.T.); +#182264 = ORIENTED_EDGE('',*,*,#182239,.T.); +#182265 = ORIENTED_EDGE('',*,*,#181978,.T.); +#182266 = ORIENTED_EDGE('',*,*,#182267,.F.); +#182267 = EDGE_CURVE('',#181514,#181937,#182268,.T.); +#182268 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182269,#182270), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182269 = CARTESIAN_POINT('',(2.,-1.714285714286,0.35)); +#182270 = CARTESIAN_POINT('',(1.75,-1.5,1.45)); +#182271 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#182272,#182273) + ,(#182274,#182275) + ,(#182276,#182277) + ,(#182278,#182279) + ,(#182280,#182281 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(0.,0.119084361722),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#182272 = CARTESIAN_POINT('',(2.,-1.714285714286,0.35)); +#182273 = CARTESIAN_POINT('',(1.75,-1.5,1.45)); +#182274 = CARTESIAN_POINT('',(2.,-1.723214285714,0.35)); +#182275 = CARTESIAN_POINT('',(1.75,-1.507442772608,1.45)); +#182276 = CARTESIAN_POINT('',(2.,-1.732142857143,0.35)); +#182277 = CARTESIAN_POINT('',(1.749704560515,-1.514885549367,1.45)); +#182278 = CARTESIAN_POINT('',(2.,-1.741071428571,0.35)); +#182279 = CARTESIAN_POINT('',(1.749113682669,-1.522310714264,1.45)); +#182280 = CARTESIAN_POINT('',(2.,-1.75,0.35)); +#182281 = CARTESIAN_POINT('',(1.748229458184,-1.529700775911,1.45)); +#182282 = ADVANCED_FACE('',(#182283),#182293,.F.); +#182283 = FACE_BOUND('',#182284,.F.); +#182284 = EDGE_LOOP('',(#182285,#182286,#182287,#182288)); +#182285 = ORIENTED_EDGE('',*,*,#181513,.T.); +#182286 = ORIENTED_EDGE('',*,*,#182267,.T.); +#182287 = ORIENTED_EDGE('',*,*,#181944,.F.); +#182288 = ORIENTED_EDGE('',*,*,#182289,.F.); +#182289 = EDGE_CURVE('',#181506,#181892,#182290,.T.); +#182290 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182291,#182292), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182291 = CARTESIAN_POINT('',(2.,1.714285714286,0.35)); +#182292 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#182293 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#182294,#182295) + ,(#182296,#182297 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(3.571428571429E-02, + 3.464285714286),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182294 = CARTESIAN_POINT('',(2.,1.714285714286,0.35)); +#182295 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#182296 = CARTESIAN_POINT('',(2.,-1.714285714286,0.35)); +#182297 = CARTESIAN_POINT('',(1.75,-1.5,1.45)); +#182298 = ADVANCED_FACE('',(#182299),#182309,.F.); +#182299 = FACE_BOUND('',#182300,.F.); +#182300 = EDGE_LOOP('',(#182301,#182302,#182303,#182304)); +#182301 = ORIENTED_EDGE('',*,*,#181505,.T.); +#182302 = ORIENTED_EDGE('',*,*,#182289,.T.); +#182303 = ORIENTED_EDGE('',*,*,#181891,.T.); +#182304 = ORIENTED_EDGE('',*,*,#182305,.F.); +#182305 = EDGE_CURVE('',#181497,#181894,#182306,.T.); +#182306 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182307,#182308), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182307 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#182308 = CARTESIAN_POINT('',(1.748229458184,1.529700775911,1.45)); +#182309 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#182310,#182311) + ,(#182312,#182313) + ,(#182314,#182315) + ,(#182316,#182317) + ,(#182318,#182319 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(6.164100945457, + 6.28318530718),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182310 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#182311 = CARTESIAN_POINT('',(1.748229458184,1.529700775911,1.45)); +#182312 = CARTESIAN_POINT('',(2.,1.741071428571,0.35)); +#182313 = CARTESIAN_POINT('',(1.749113682669,1.522310714264,1.45)); +#182314 = CARTESIAN_POINT('',(2.,1.732142857143,0.35)); +#182315 = CARTESIAN_POINT('',(1.749704560515,1.514885549367,1.45)); +#182316 = CARTESIAN_POINT('',(2.,1.723214285714,0.35)); +#182317 = CARTESIAN_POINT('',(1.75,1.507442772608,1.45)); +#182318 = CARTESIAN_POINT('',(2.,1.714285714286,0.35)); +#182319 = CARTESIAN_POINT('',(1.75,1.5,1.45)); +#182320 = ADVANCED_FACE('',(#182321),#182331,.F.); +#182321 = FACE_BOUND('',#182322,.F.); +#182322 = EDGE_LOOP('',(#182323,#182324,#182325,#182326)); +#182323 = ORIENTED_EDGE('',*,*,#181496,.F.); +#182324 = ORIENTED_EDGE('',*,*,#182305,.T.); +#182325 = ORIENTED_EDGE('',*,*,#181902,.T.); +#182326 = ORIENTED_EDGE('',*,*,#182327,.F.); +#182327 = EDGE_CURVE('',#181489,#181903,#182328,.T.); +#182328 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182329,#182330), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182329 = CARTESIAN_POINT('',(1.75,2.,0.35)); +#182330 = CARTESIAN_POINT('',(1.529700775911,1.748229458184,1.45)); +#182331 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#182332,#182333) + ,(#182334,#182335) + ,(#182336,#182337) + ,(#182338,#182339) + ,(#182340,#182341) + ,(#182342,#182343) + ,(#182344,#182345) + ,(#182346,#182347 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(4.712388980385, + 6.28318530718),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182332 = CARTESIAN_POINT('',(1.75,2.,0.35)); +#182333 = CARTESIAN_POINT('',(1.529700775911,1.748229458184,1.45)); +#182334 = CARTESIAN_POINT('',(1.806099868814,2.,0.35)); +#182335 = CARTESIAN_POINT('',(1.576957551331,1.742575161924,1.45)); +#182336 = CARTESIAN_POINT('',(1.862199466246,1.985312778362,0.35)); +#182337 = CARTESIAN_POINT('',(1.622958407438,1.72642483542,1.45)); +#182338 = CARTESIAN_POINT('',(1.913686735206,1.955940680551,0.35)); +#182339 = CARTESIAN_POINT('',(1.664906447161,1.700113819693,1.45)); +#182340 = CARTESIAN_POINT('',(1.95594068055,1.913686735206,0.35)); +#182341 = CARTESIAN_POINT('',(1.700113819693,1.664906447161,1.45)); +#182342 = CARTESIAN_POINT('',(1.985312778362,1.862199466246,0.35)); +#182343 = CARTESIAN_POINT('',(1.72642483542,1.622958407439,1.45)); +#182344 = CARTESIAN_POINT('',(2.,1.806099868814,0.35)); +#182345 = CARTESIAN_POINT('',(1.742575161924,1.576957551331,1.45)); +#182346 = CARTESIAN_POINT('',(2.,1.75,0.35)); +#182347 = CARTESIAN_POINT('',(1.748229458184,1.529700775911,1.45)); +#182348 = ADVANCED_FACE('',(#182349),#182359,.F.); +#182349 = FACE_BOUND('',#182350,.F.); +#182350 = EDGE_LOOP('',(#182351,#182352,#182353,#182354)); +#182351 = ORIENTED_EDGE('',*,*,#181488,.T.); +#182352 = ORIENTED_EDGE('',*,*,#182327,.T.); +#182353 = ORIENTED_EDGE('',*,*,#181911,.T.); +#182354 = ORIENTED_EDGE('',*,*,#182355,.F.); +#182355 = EDGE_CURVE('',#181481,#181870,#182356,.T.); +#182356 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182357,#182358), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182357 = CARTESIAN_POINT('',(1.714285714286,2.,0.35)); +#182358 = CARTESIAN_POINT('',(1.5,1.75,1.45)); +#182359 = B_SPLINE_SURFACE_WITH_KNOTS('',4,1,( + (#182360,#182361) + ,(#182362,#182363) + ,(#182364,#182365) + ,(#182366,#182367) + ,(#182368,#182369 + )),.UNSPECIFIED.,.F.,.F.,.F.,(5,5),(2,2),(4.712388980385, + 4.831473342107),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182360 = CARTESIAN_POINT('',(1.714285714286,2.,0.35)); +#182361 = CARTESIAN_POINT('',(1.5,1.75,1.45)); +#182362 = CARTESIAN_POINT('',(1.723214285714,2.,0.35)); +#182363 = CARTESIAN_POINT('',(1.507442772608,1.75,1.45)); +#182364 = CARTESIAN_POINT('',(1.732142857143,2.,0.35)); +#182365 = CARTESIAN_POINT('',(1.514885549367,1.749704560515,1.45)); +#182366 = CARTESIAN_POINT('',(1.741071428571,2.,0.35)); +#182367 = CARTESIAN_POINT('',(1.522310714264,1.749113682669,1.45)); +#182368 = CARTESIAN_POINT('',(1.75,2.,0.35)); +#182369 = CARTESIAN_POINT('',(1.529700775911,1.748229458184,1.45)); +#182370 = ADVANCED_FACE('',(#182371),#182381,.F.); +#182371 = FACE_BOUND('',#182372,.F.); +#182372 = EDGE_LOOP('',(#182373,#182374,#182375,#182376)); +#182373 = ORIENTED_EDGE('',*,*,#181480,.T.); +#182374 = ORIENTED_EDGE('',*,*,#182355,.T.); +#182375 = ORIENTED_EDGE('',*,*,#181877,.F.); +#182376 = ORIENTED_EDGE('',*,*,#182377,.F.); +#182377 = EDGE_CURVE('',#181473,#181593,#182378,.T.); +#182378 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182379,#182380), + .UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182379 = CARTESIAN_POINT('',(1.028571428571,2.,0.35)); +#182380 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#182381 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#182382,#182383) + ,(#182384,#182385 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(2.778571428571, + 3.464285714286),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182382 = CARTESIAN_POINT('',(1.028571428571,2.,0.35)); +#182383 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#182384 = CARTESIAN_POINT('',(1.714285714286,2.,0.35)); +#182385 = CARTESIAN_POINT('',(1.5,1.75,1.45)); +#182386 = ADVANCED_FACE('',(#182387),#182393,.F.); +#182387 = FACE_BOUND('',#182388,.F.); +#182388 = EDGE_LOOP('',(#182389,#182390,#182391,#182392)); +#182389 = ORIENTED_EDGE('',*,*,#181472,.T.); +#182390 = ORIENTED_EDGE('',*,*,#182377,.T.); +#182391 = ORIENTED_EDGE('',*,*,#181592,.F.); +#182392 = ORIENTED_EDGE('',*,*,#181577,.F.); +#182393 = B_SPLINE_SURFACE_WITH_KNOTS('',7,1,( + (#182394,#182395) + ,(#182396,#182397) + ,(#182398,#182399) + ,(#182400,#182401) + ,(#182402,#182403) + ,(#182404,#182405) + ,(#182406,#182407) + ,(#182408,#182409 + )),.UNSPECIFIED.,.F.,.F.,.F.,(8,8),(2,2),(3.14159265359, + 4.712388980385),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#182394 = CARTESIAN_POINT('',(0.864864864865,2.,0.35)); +#182395 = CARTESIAN_POINT('',(0.8,1.85,1.45)); +#182396 = CARTESIAN_POINT('',(0.888251516823,2.,0.35)); +#182397 = CARTESIAN_POINT('',(0.8,1.827560052474,1.45)); +#182398 = CARTESIAN_POINT('',(0.911638168781,2.,0.35)); +#182399 = CARTESIAN_POINT('',(0.805874888655,1.805120213502,1.45)); +#182400 = CARTESIAN_POINT('',(0.935024820739,2.,0.35)); +#182401 = CARTESIAN_POINT('',(0.81762372778,1.784525305918,1.45)); +#182402 = CARTESIAN_POINT('',(0.958411472697,2.,0.35)); +#182403 = CARTESIAN_POINT('',(0.834525305918,1.76762372778,1.45)); +#182404 = CARTESIAN_POINT('',(0.981798124655,2.,0.35)); +#182405 = CARTESIAN_POINT('',(0.855120213502,1.755874888655,1.45)); +#182406 = CARTESIAN_POINT('',(1.005184776613,2.,0.35)); +#182407 = CARTESIAN_POINT('',(0.877560052474,1.75,1.45)); +#182408 = CARTESIAN_POINT('',(1.028571428571,2.,0.35)); +#182409 = CARTESIAN_POINT('',(0.9,1.75,1.45)); +#182410 = ADVANCED_FACE('',(#182411),#182417,.T.); +#182411 = FACE_BOUND('',#182412,.T.); +#182412 = EDGE_LOOP('',(#182413,#182414,#182415,#182416)); +#182413 = ORIENTED_EDGE('',*,*,#181850,.F.); +#182414 = ORIENTED_EDGE('',*,*,#181709,.T.); +#182415 = ORIENTED_EDGE('',*,*,#181779,.F.); +#182416 = ORIENTED_EDGE('',*,*,#181834,.F.); +#182417 = CYLINDRICAL_SURFACE('',#182418,0.1); +#182418 = AXIS2_PLACEMENT_3D('',#182419,#182420,#182421); +#182419 = CARTESIAN_POINT('',(0.8,-1.9,0.1)); +#182420 = DIRECTION('',(-1.,0.,0.)); +#182421 = DIRECTION('',(0.,0.,-1.)); +#182422 = ADVANCED_FACE('',(#182423),#182429,.T.); +#182423 = FACE_BOUND('',#182424,.T.); +#182424 = EDGE_LOOP('',(#182425,#182426,#182427,#182428)); +#182425 = ORIENTED_EDGE('',*,*,#182122,.T.); +#182426 = ORIENTED_EDGE('',*,*,#182050,.T.); +#182427 = ORIENTED_EDGE('',*,*,#182076,.T.); +#182428 = ORIENTED_EDGE('',*,*,#182093,.F.); +#182429 = CYLINDRICAL_SURFACE('',#182430,0.1); +#182430 = AXIS2_PLACEMENT_3D('',#182431,#182432,#182433); +#182431 = CARTESIAN_POINT('',(0.7,-1.9,1.45)); +#182432 = DIRECTION('',(-0.,-0.,-1.)); +#182433 = DIRECTION('',(1.,0.,0.)); +#182434 = MANIFOLD_SOLID_BREP('',#182435); +#182435 = CLOSED_SHELL('',(#182436,#182453,#182687)); +#182436 = ADVANCED_FACE('',(#182437),#182448,.T.); +#182437 = FACE_BOUND('',#182438,.T.); +#182438 = EDGE_LOOP('',(#182439)); +#182439 = ORIENTED_EDGE('',*,*,#182440,.T.); +#182440 = EDGE_CURVE('',#182441,#182441,#182443,.T.); +#182441 = VERTEX_POINT('',#182442); +#182442 = CARTESIAN_POINT('',(-0.8,-1.6,1.1)); +#182443 = CIRCLE('',#182444,0.1); +#182444 = AXIS2_PLACEMENT_3D('',#182445,#182446,#182447); +#182445 = CARTESIAN_POINT('',(-0.9,-1.6,1.1)); +#182446 = DIRECTION('',(4.440892098501E-16,1.,7.172614055054E-16)); +#182447 = DIRECTION('',(1.,-4.440892098501E-16,-5.521788796701E-32)); +#182448 = PLANE('',#182449); +#182449 = AXIS2_PLACEMENT_3D('',#182450,#182451,#182452); +#182450 = CARTESIAN_POINT('',(-0.9,-1.6,1.1)); +#182451 = DIRECTION('',(0.,1.,0.)); +#182452 = DIRECTION('',(0.,-0.,1.)); +#182453 = ADVANCED_FACE('',(#182454),#182497,.F.); +#182454 = FACE_BOUND('',#182455,.F.); +#182455 = EDGE_LOOP('',(#182456,#182488,#182495,#182496)); +#182456 = ORIENTED_EDGE('',*,*,#182457,.T.); +#182457 = EDGE_CURVE('',#182441,#182458,#182460,.T.); +#182458 = VERTEX_POINT('',#182459); +#182459 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#182460 = ( BOUNDED_CURVE() B_SPLINE_CURVE(10,(#182461,#182462,#182463, + #182464,#182465,#182466,#182467,#182468,#182469,#182470,#182471, + #182472,#182473,#182474,#182475,#182476,#182477,#182478,#182479, + #182480,#182481,#182482,#182483,#182484,#182485,#182486,#182487), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((11,8,8,11),( + 2.77107387809E-16,0.392699081699,0.785398163397,1.570796326795), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461069,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461069,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068)) +REPRESENTATION_ITEM('') ); +#182461 = CARTESIAN_POINT('',(-0.8,-1.6,1.1)); +#182462 = CARTESIAN_POINT('',(-0.8,-1.611780972451,1.1)); +#182463 = CARTESIAN_POINT('',(-0.8,-1.623561944902,1.09871489526)); +#182464 = CARTESIAN_POINT('',(-0.8,-1.63531768438,1.096144685781)); +#182465 = CARTESIAN_POINT('',(-0.8,-1.647022957914,1.092292910478)); +#182466 = CARTESIAN_POINT('',(-0.8,-1.658652625178,1.087166647183)); +#182467 = CARTESIAN_POINT('',(-0.8,-1.670181731146,1.080776494454)); +#182468 = CARTESIAN_POINT('',(-0.8,-1.681585598024,1.07313653519)); +#182469 = CARTESIAN_POINT('',(-0.8,-1.692839915751,1.064264282288)); +#182470 = CARTESIAN_POINT('',(-0.8,-1.715001745027,1.04409693135)); +#182471 = CARTESIAN_POINT('',(-0.8,-1.736376713033,1.019180452547)); +#182472 = CARTESIAN_POINT('',(-0.8,-1.746844169493,1.005559071781)); +#182473 = CARTESIAN_POINT('',(-0.8,-1.757068827896,0.990801959782)); +#182474 = CARTESIAN_POINT('',(-0.8,-1.767028545038,0.974939707582)); +#182475 = CARTESIAN_POINT('',(-0.8,-1.776701887838,0.958005981656)); +#182476 = CARTESIAN_POINT('',(-0.8,-1.786068212704,0.940037402365)); +#182477 = CARTESIAN_POINT('',(-0.8,-1.795107740827,0.921073407159)); +#182478 = CARTESIAN_POINT('',(-0.8,-1.821189404886,0.861321484669)); +#182479 = CARTESIAN_POINT('',(-0.8,-1.843999726351,0.793391205695)); +#182480 = CARTESIAN_POINT('',(-0.8,-1.857609938004,0.744826376245)); +#182481 = CARTESIAN_POINT('',(-0.8,-1.869496756551,0.693380455538)); +#182482 = CARTESIAN_POINT('',(-0.8,-1.879551569469,0.639485128642)); +#182483 = CARTESIAN_POINT('',(-0.8,-1.88768564352,0.583600811525)); +#182484 = CARTESIAN_POINT('',(-0.8,-1.893831497278,0.526209927126)); +#182485 = CARTESIAN_POINT('',(-0.8,-1.897943832416,0.46780972451)); +#182486 = CARTESIAN_POINT('',(-0.8,-1.9,0.408904862255)); +#182487 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#182488 = ORIENTED_EDGE('',*,*,#182489,.F.); +#182489 = EDGE_CURVE('',#182458,#182458,#182490,.T.); +#182490 = CIRCLE('',#182491,0.1); +#182491 = AXIS2_PLACEMENT_3D('',#182492,#182493,#182494); +#182492 = CARTESIAN_POINT('',(-0.9,-1.9,0.35)); +#182493 = DIRECTION('',(-0.,0.,1.)); +#182494 = DIRECTION('',(1.,-5.438524293788E-33,0.)); +#182495 = ORIENTED_EDGE('',*,*,#182457,.F.); +#182496 = ORIENTED_EDGE('',*,*,#182440,.T.); +#182497 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(6,10,( + (#182498,#182499,#182500,#182501,#182502,#182503,#182504,#182505 + ,#182506,#182507,#182508,#182509,#182510,#182511,#182512,#182513 + ,#182514,#182515,#182516,#182517,#182518,#182519,#182520,#182521 + ,#182522,#182523,#182524) + ,(#182525,#182526,#182527,#182528,#182529,#182530,#182531,#182532 + ,#182533,#182534,#182535,#182536,#182537,#182538,#182539,#182540 + ,#182541,#182542,#182543,#182544,#182545,#182546,#182547,#182548 + ,#182549,#182550,#182551) + ,(#182552,#182553,#182554,#182555,#182556,#182557,#182558,#182559 + ,#182560,#182561,#182562,#182563,#182564,#182565,#182566,#182567 + ,#182568,#182569,#182570,#182571,#182572,#182573,#182574,#182575 + ,#182576,#182577,#182578) + ,(#182579,#182580,#182581,#182582,#182583,#182584,#182585,#182586 + ,#182587,#182588,#182589,#182590,#182591,#182592,#182593,#182594 + ,#182595,#182596,#182597,#182598,#182599,#182600,#182601,#182602 + ,#182603,#182604,#182605) + ,(#182606,#182607,#182608,#182609,#182610,#182611,#182612,#182613 + ,#182614,#182615,#182616,#182617,#182618,#182619,#182620,#182621 + ,#182622,#182623,#182624,#182625,#182626,#182627,#182628,#182629 + ,#182630,#182631,#182632) + ,(#182633,#182634,#182635,#182636,#182637,#182638,#182639,#182640 + ,#182641,#182642,#182643,#182644,#182645,#182646,#182647,#182648 + ,#182649,#182650,#182651,#182652,#182653,#182654,#182655,#182656 + ,#182657,#182658,#182659) + ,(#182660,#182661,#182662,#182663,#182664,#182665,#182666,#182667 + ,#182668,#182669,#182670,#182671,#182672,#182673,#182674,#182675 + ,#182676,#182677,#182678,#182679,#182680,#182681,#182682,#182683 + ,#182684,#182685,#182686 +)),.UNSPECIFIED.,.T.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((1,6,6,1),(11, + 8,8,11),(-6.28318530718,0.,6.28318530718,12.56637061436),( + 2.77107387809E-16,0.392699081699,0.785398163397,1.570796326795), +.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE +(( + (1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068) + ,(1.03672962321,1.03672962321,1.036729623209,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321) + ,(1.038346699848,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699848,1.038346699847 + ,1.038346699848,1.038346699847,1.038346699848) + ,(0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196) + ,(1.038346699848,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699848) + ,(1.03672962321,1.03672962321,1.036729623209,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321) + ,(1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068 +))) REPRESENTATION_ITEM('') SURFACE() ); +#182498 = CARTESIAN_POINT('',(-0.8,-1.6,1.1)); +#182499 = CARTESIAN_POINT('',(-0.8,-1.611780972451,1.1)); +#182500 = CARTESIAN_POINT('',(-0.8,-1.623561944902,1.09871489526)); +#182501 = CARTESIAN_POINT('',(-0.8,-1.63531768438,1.096144685781)); +#182502 = CARTESIAN_POINT('',(-0.8,-1.647022957914,1.092292910478)); +#182503 = CARTESIAN_POINT('',(-0.8,-1.658652625178,1.087166647183)); +#182504 = CARTESIAN_POINT('',(-0.8,-1.670181731146,1.080776494454)); +#182505 = CARTESIAN_POINT('',(-0.8,-1.681585598024,1.07313653519)); +#182506 = CARTESIAN_POINT('',(-0.8,-1.692839915751,1.064264282288)); +#182507 = CARTESIAN_POINT('',(-0.8,-1.715001745027,1.04409693135)); +#182508 = CARTESIAN_POINT('',(-0.8,-1.736376713033,1.019180452547)); +#182509 = CARTESIAN_POINT('',(-0.8,-1.746844169493,1.005559071781)); +#182510 = CARTESIAN_POINT('',(-0.8,-1.757068827896,0.990801959782)); +#182511 = CARTESIAN_POINT('',(-0.8,-1.767028545038,0.974939707582)); +#182512 = CARTESIAN_POINT('',(-0.8,-1.776701887838,0.958005981656)); +#182513 = CARTESIAN_POINT('',(-0.8,-1.786068212704,0.940037402365)); +#182514 = CARTESIAN_POINT('',(-0.8,-1.795107740827,0.921073407159)); +#182515 = CARTESIAN_POINT('',(-0.8,-1.821189404886,0.861321484669)); +#182516 = CARTESIAN_POINT('',(-0.8,-1.843999726351,0.793391205695)); +#182517 = CARTESIAN_POINT('',(-0.8,-1.857609938004,0.744826376245)); +#182518 = CARTESIAN_POINT('',(-0.8,-1.869496756551,0.693380455538)); +#182519 = CARTESIAN_POINT('',(-0.8,-1.879551569469,0.639485128642)); +#182520 = CARTESIAN_POINT('',(-0.8,-1.88768564352,0.583600811525)); +#182521 = CARTESIAN_POINT('',(-0.8,-1.893831497278,0.526209927126)); +#182522 = CARTESIAN_POINT('',(-0.8,-1.897943832416,0.46780972451)); +#182523 = CARTESIAN_POINT('',(-0.8,-1.9,0.408904862255)); +#182524 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#182525 = CARTESIAN_POINT('',(-0.8,-1.6,0.933845692443)); +#182526 = CARTESIAN_POINT('',(-0.8,-1.595468811451,0.933845692443)); +#182527 = CARTESIAN_POINT('',(-0.8,-1.590937622903,0.934339968438)); +#182528 = CARTESIAN_POINT('',(-0.8,-1.586966713577,0.935327962207)); +#182529 = CARTESIAN_POINT('',(-0.8,-1.584113250727,0.936581134785)); +#182530 = CARTESIAN_POINT('',(-0.8,-1.582771380666,0.937617909691)); +#182531 = CARTESIAN_POINT('',(-0.8,-1.582917208482,0.937941289229)); +#182532 = CARTESIAN_POINT('',(-0.8,-1.584431750573,0.937263318338)); +#182533 = CARTESIAN_POINT('',(-0.8,-1.58712619232,0.935364166905)); +#182534 = CARTESIAN_POINT('',(-0.8,-1.594484413426,0.928889076056)); +#182535 = CARTESIAN_POINT('',(-0.8,-1.605038673701,0.916815185095)); +#182536 = CARTESIAN_POINT('',(-0.8,-1.61092908937,0.909317617888)); +#182537 = CARTESIAN_POINT('',(-0.8,-1.617257806211,0.900359390897)); +#182538 = CARTESIAN_POINT('',(-0.8,-1.623878977302,0.889974013342)); +#182539 = CARTESIAN_POINT('',(-0.8,-1.630674252121,0.87821185523)); +#182540 = CARTESIAN_POINT('',(-0.8,-1.637545709343,0.865131362757)); +#182541 = CARTESIAN_POINT('',(-0.8,-1.644411120979,0.850795396342)); +#182542 = CARTESIAN_POINT('',(-0.8,-1.664785109548,0.804218849475)); +#182543 = CARTESIAN_POINT('',(-0.8,-1.683969772183,0.747540343777)); +#182544 = CARTESIAN_POINT('',(-0.8,-1.695767328242,0.705802761178)); +#182545 = CARTESIAN_POINT('',(-0.8,-1.706276230306,0.660671231529)); +#182546 = CARTESIAN_POINT('',(-0.8,-1.715285238706,0.612701219382)); +#182547 = CARTESIAN_POINT('',(-0.8,-1.722637969814,0.562449724049)); +#182548 = CARTESIAN_POINT('',(-0.8,-1.728223672209,0.510481974644)); +#182549 = CARTESIAN_POINT('',(-0.8,-1.731971733447,0.45736994147)); +#182550 = CARTESIAN_POINT('',(-0.8,-1.733845692443,0.403684970735)); +#182551 = CARTESIAN_POINT('',(-0.8,-1.733845692443,0.35)); +#182552 = CARTESIAN_POINT('',(-1.005454819055,-1.6,0.909988761675)); +#182553 = CARTESIAN_POINT('',(-1.005454819055,-1.59312666275, + 0.909988761675)); +#182554 = CARTESIAN_POINT('',(-1.005454819055,-1.586253325501, + 0.91073852646)); +#182555 = CARTESIAN_POINT('',(-1.005454819055,-1.58002433706, + 0.912237417659)); +#182556 = CARTESIAN_POINT('',(-1.005454819055,-1.575080487442, + 0.914223573871)); +#182557 = CARTESIAN_POINT('',(-1.005454819055,-1.571876125386, + 0.916145256173)); +#182558 = CARTESIAN_POINT('',(-1.005454819055,-1.570387508192, + 0.917432584686)); +#182559 = CARTESIAN_POINT('',(-1.005454819055,-1.570482111551, + 0.917754236839)); +#182560 = CARTESIAN_POINT('',(-1.005454819055,-1.571947500788, + 0.9168563041)); +#182561 = CARTESIAN_POINT('',(-1.005454819055,-1.577180175705, + 0.912347188771)); +#182562 = CARTESIAN_POINT('',(-1.005454819055,-1.586180766509, + 0.902117274854)); +#182563 = CARTESIAN_POINT('',(-1.005454819055,-1.591413997018, + 0.895498983053)); +#182564 = CARTESIAN_POINT('',(-1.005454819055,-1.597183322956, + 0.887373377257)); +#182565 = CARTESIAN_POINT('',(-1.005454819055,-1.603325135653, + 0.87777438569)); +#182566 = CARTESIAN_POINT('',(-1.005454819055,-1.609707168892, + 0.8667547767)); +#182567 = CARTESIAN_POINT('',(-1.005454819055,-1.616220405581, + 0.854376130303)); +#182568 = CARTESIAN_POINT('',(-1.005454819055,-1.622773651091, + 0.840704670057)); +#182569 = CARTESIAN_POINT('',(-1.005454819055,-1.642328114599, + 0.796019882897)); +#182570 = CARTESIAN_POINT('',(-1.005454819055,-1.660992194331, + 0.740956940346)); +#182571 = CARTESIAN_POINT('',(-1.005454819055,-1.672529483897, + 0.700199634202)); +#182572 = CARTESIAN_POINT('',(-1.005454819055,-1.682840540604, + 0.655974743644)); +#182573 = CARTESIAN_POINT('',(-1.005454819055,-1.691699389275, + 0.60885550585)); +#182574 = CARTESIAN_POINT('',(-1.005454819055,-1.698939932834, + 0.55941278786)); +#182575 = CARTESIAN_POINT('',(-1.005454819055,-1.704445207027, + 0.508223708343)); +#182576 = CARTESIAN_POINT('',(-1.005454819055,-1.708140964731, + 0.455870966301)); +#182577 = CARTESIAN_POINT('',(-1.005454819055,-1.709988761675, + 0.402935483151)); +#182578 = CARTESIAN_POINT('',(-1.005454819055,-1.709988761675,0.35)); +#182579 = CARTESIAN_POINT('',(-1.174911692101,-1.6,1.1)); +#182580 = CARTESIAN_POINT('',(-1.174911692101,-1.611780972451,1.1)); +#182581 = CARTESIAN_POINT('',(-1.174911692101,-1.623561944902, + 1.09871489526)); +#182582 = CARTESIAN_POINT('',(-1.174911692101,-1.63531768438, + 1.096144685781)); +#182583 = CARTESIAN_POINT('',(-1.174911692101,-1.647022957914, + 1.092292910478)); +#182584 = CARTESIAN_POINT('',(-1.174911692101,-1.658652625178, + 1.087166647183)); +#182585 = CARTESIAN_POINT('',(-1.174911692101,-1.670181731146, + 1.080776494454)); +#182586 = CARTESIAN_POINT('',(-1.174911692101,-1.681585598024, + 1.07313653519)); +#182587 = CARTESIAN_POINT('',(-1.174911692101,-1.692839915751, + 1.064264282288)); +#182588 = CARTESIAN_POINT('',(-1.174911692101,-1.715001745027, + 1.04409693135)); +#182589 = CARTESIAN_POINT('',(-1.174911692101,-1.736376713033, + 1.019180452547)); +#182590 = CARTESIAN_POINT('',(-1.174911692101,-1.746844169493, + 1.005559071781)); +#182591 = CARTESIAN_POINT('',(-1.174911692101,-1.757068827896, + 0.990801959782)); +#182592 = CARTESIAN_POINT('',(-1.174911692101,-1.767028545038, + 0.974939707582)); +#182593 = CARTESIAN_POINT('',(-1.174911692101,-1.776701887838, + 0.958005981656)); +#182594 = CARTESIAN_POINT('',(-1.174911692101,-1.786068212704, + 0.940037402365)); +#182595 = CARTESIAN_POINT('',(-1.174911692101,-1.795107740827, + 0.921073407159)); +#182596 = CARTESIAN_POINT('',(-1.174911692101,-1.821189404886, + 0.861321484669)); +#182597 = CARTESIAN_POINT('',(-1.174911692101,-1.843999726351, + 0.793391205695)); +#182598 = CARTESIAN_POINT('',(-1.174911692101,-1.857609938004, + 0.744826376245)); +#182599 = CARTESIAN_POINT('',(-1.174911692101,-1.869496756551, + 0.693380455538)); +#182600 = CARTESIAN_POINT('',(-1.174911692101,-1.879551569469, + 0.639485128642)); +#182601 = CARTESIAN_POINT('',(-1.174911692101,-1.88768564352, + 0.583600811525)); +#182602 = CARTESIAN_POINT('',(-1.174911692101,-1.893831497278, + 0.526209927126)); +#182603 = CARTESIAN_POINT('',(-1.174911692101,-1.897943832416, + 0.46780972451)); +#182604 = CARTESIAN_POINT('',(-1.174911692101,-1.9,0.408904862255)); +#182605 = CARTESIAN_POINT('',(-1.174911692101,-1.9,0.35)); +#182606 = CARTESIAN_POINT('',(-1.005454819055,-1.6,1.290011238325)); +#182607 = CARTESIAN_POINT('',(-1.005454819055,-1.630435282152, + 1.290011238325)); +#182608 = CARTESIAN_POINT('',(-1.005454819055,-1.660870564303, + 1.28669126406)); +#182609 = CARTESIAN_POINT('',(-1.005454819055,-1.690611031701, + 1.280051953903)); +#182610 = CARTESIAN_POINT('',(-1.005454819055,-1.718965428386, + 1.270362247085)); +#182611 = CARTESIAN_POINT('',(-1.005454819055,-1.74542912497, + 1.258188038194)); +#182612 = CARTESIAN_POINT('',(-1.005454819055,-1.769975954101, + 1.244120404223)); +#182613 = CARTESIAN_POINT('',(-1.005454819055,-1.792689084496, + 1.22851883354)); +#182614 = CARTESIAN_POINT('',(-1.005454819055,-1.813732330715, + 1.211672260476)); +#182615 = CARTESIAN_POINT('',(-1.005454819055,-1.852823314348, + 1.175846673928)); +#182616 = CARTESIAN_POINT('',(-1.005454819055,-1.886572659558, + 1.136243630239)); +#182617 = CARTESIAN_POINT('',(-1.005454819055,-1.902274341968, + 1.115619160508)); +#182618 = CARTESIAN_POINT('',(-1.005454819055,-1.916954332835, + 1.094230542308)); +#182619 = CARTESIAN_POINT('',(-1.005454819055,-1.930731954422, + 1.072105029474)); +#182620 = CARTESIAN_POINT('',(-1.005454819055,-1.943696606784, + 1.049257186613)); +#182621 = CARTESIAN_POINT('',(-1.005454819055,-1.955916019827, + 1.025698674426)); +#182622 = CARTESIAN_POINT('',(-1.005454819055,-1.967441830564, + 1.001442144261)); +#182623 = CARTESIAN_POINT('',(-1.005454819055,-2.000050695173, + 0.926623086441)); +#182624 = CARTESIAN_POINT('',(-1.005454819055,-2.02700725837, + 0.845825471045)); +#182625 = CARTESIAN_POINT('',(-1.005454819055,-2.042690392111, + 0.789453118288)); +#182626 = CARTESIAN_POINT('',(-1.005454819055,-2.056152972497, + 0.730786167432)); +#182627 = CARTESIAN_POINT('',(-1.005454819055,-2.067403749663, + 0.670114751433)); +#182628 = CARTESIAN_POINT('',(-1.005454819055,-2.076431354206, + 0.607788835189)); +#182629 = CARTESIAN_POINT('',(-1.005454819055,-2.083217787528, + 0.544196145908)); +#182630 = CARTESIAN_POINT('',(-1.005454819055,-2.087746700102, + 0.479748482718)); +#182631 = CARTESIAN_POINT('',(-1.005454819055,-2.090011238325, + 0.414874241359)); +#182632 = CARTESIAN_POINT('',(-1.005454819055,-2.090011238325,0.35)); +#182633 = CARTESIAN_POINT('',(-0.8,-1.6,1.266154307557)); +#182634 = CARTESIAN_POINT('',(-0.8,-1.62809313345,1.266154307557)); +#182635 = CARTESIAN_POINT('',(-0.8,-1.656186266901,1.263089822083)); +#182636 = CARTESIAN_POINT('',(-0.8,-1.683668655184,1.256961409355)); +#182637 = CARTESIAN_POINT('',(-0.8,-1.709932665101,1.24800468617)); +#182638 = CARTESIAN_POINT('',(-0.8,-1.734533869689,1.236715384676)); +#182639 = CARTESIAN_POINT('',(-0.8,-1.75744625381,1.22361169968)); +#182640 = CARTESIAN_POINT('',(-0.8,-1.778739445474,1.209009752041)); +#182641 = CARTESIAN_POINT('',(-0.8,-1.798553639183,1.193164397671)); +#182642 = CARTESIAN_POINT('',(-0.8,-1.835519076628,1.159304786643)); +#182643 = CARTESIAN_POINT('',(-0.8,-1.867714752366,1.121545719999)); +#182644 = CARTESIAN_POINT('',(-0.8,-1.882759249615,1.101800525673)); +#182645 = CARTESIAN_POINT('',(-0.8,-1.89687984958,1.081244528668)); +#182646 = CARTESIAN_POINT('',(-0.8,-1.910178112773,1.059905401822)); +#182647 = CARTESIAN_POINT('',(-0.8,-1.922729523555,1.037800108083)); +#182648 = CARTESIAN_POINT('',(-0.8,-1.934590716065,1.014943441972)); +#182649 = CARTESIAN_POINT('',(-0.8,-1.945804360676,0.991351417977)); +#182650 = CARTESIAN_POINT('',(-0.8,-1.977593700224,0.918424119863)); +#182651 = CARTESIAN_POINT('',(-0.8,-2.004029680519,0.839242067614)); +#182652 = CARTESIAN_POINT('',(-0.8,-2.019452547766,0.783849991312)); +#182653 = CARTESIAN_POINT('',(-0.8,-2.032717282796,0.726089679546)); +#182654 = CARTESIAN_POINT('',(-0.8,-2.043817900231,0.666269037901)); +#182655 = CARTESIAN_POINT('',(-0.8,-2.052733317226,0.604751899)); +#182656 = CARTESIAN_POINT('',(-0.8,-2.059439322346,0.541937879607)); +#182657 = CARTESIAN_POINT('',(-0.8,-2.063915931386,0.478249507549)); +#182658 = CARTESIAN_POINT('',(-0.8,-2.066154307557,0.414124753775)); +#182659 = CARTESIAN_POINT('',(-0.8,-2.066154307557,0.35)); +#182660 = CARTESIAN_POINT('',(-0.8,-1.6,1.1)); +#182661 = CARTESIAN_POINT('',(-0.8,-1.611780972451,1.1)); +#182662 = CARTESIAN_POINT('',(-0.8,-1.623561944902,1.09871489526)); +#182663 = CARTESIAN_POINT('',(-0.8,-1.63531768438,1.096144685781)); +#182664 = CARTESIAN_POINT('',(-0.8,-1.647022957914,1.092292910478)); +#182665 = CARTESIAN_POINT('',(-0.8,-1.658652625178,1.087166647183)); +#182666 = CARTESIAN_POINT('',(-0.8,-1.670181731146,1.080776494454)); +#182667 = CARTESIAN_POINT('',(-0.8,-1.681585598024,1.07313653519)); +#182668 = CARTESIAN_POINT('',(-0.8,-1.692839915751,1.064264282288)); +#182669 = CARTESIAN_POINT('',(-0.8,-1.715001745027,1.04409693135)); +#182670 = CARTESIAN_POINT('',(-0.8,-1.736376713033,1.019180452547)); +#182671 = CARTESIAN_POINT('',(-0.8,-1.746844169493,1.005559071781)); +#182672 = CARTESIAN_POINT('',(-0.8,-1.757068827896,0.990801959782)); +#182673 = CARTESIAN_POINT('',(-0.8,-1.767028545038,0.974939707582)); +#182674 = CARTESIAN_POINT('',(-0.8,-1.776701887838,0.958005981656)); +#182675 = CARTESIAN_POINT('',(-0.8,-1.786068212704,0.940037402365)); +#182676 = CARTESIAN_POINT('',(-0.8,-1.795107740827,0.921073407159)); +#182677 = CARTESIAN_POINT('',(-0.8,-1.821189404886,0.861321484669)); +#182678 = CARTESIAN_POINT('',(-0.8,-1.843999726351,0.793391205695)); +#182679 = CARTESIAN_POINT('',(-0.8,-1.857609938004,0.744826376245)); +#182680 = CARTESIAN_POINT('',(-0.8,-1.869496756551,0.693380455538)); +#182681 = CARTESIAN_POINT('',(-0.8,-1.879551569469,0.639485128642)); +#182682 = CARTESIAN_POINT('',(-0.8,-1.88768564352,0.583600811525)); +#182683 = CARTESIAN_POINT('',(-0.8,-1.893831497278,0.526209927126)); +#182684 = CARTESIAN_POINT('',(-0.8,-1.897943832416,0.46780972451)); +#182685 = CARTESIAN_POINT('',(-0.8,-1.9,0.408904862255)); +#182686 = CARTESIAN_POINT('',(-0.8,-1.9,0.35)); +#182687 = ADVANCED_FACE('',(#182688),#182691,.F.); +#182688 = FACE_BOUND('',#182689,.F.); +#182689 = EDGE_LOOP('',(#182690)); +#182690 = ORIENTED_EDGE('',*,*,#182489,.T.); +#182691 = PLANE('',#182692); +#182692 = AXIS2_PLACEMENT_3D('',#182693,#182694,#182695); +#182693 = CARTESIAN_POINT('',(-0.9,-1.9,0.35)); +#182694 = DIRECTION('',(0.,0.,1.)); +#182695 = DIRECTION('',(1.,0.,-0.)); +#182696 = MANIFOLD_SOLID_BREP('',#182697); +#182697 = CLOSED_SHELL('',(#182698,#182715,#182949)); +#182698 = ADVANCED_FACE('',(#182699),#182710,.T.); +#182699 = FACE_BOUND('',#182700,.T.); +#182700 = EDGE_LOOP('',(#182701)); +#182701 = ORIENTED_EDGE('',*,*,#182702,.T.); +#182702 = EDGE_CURVE('',#182703,#182703,#182705,.T.); +#182703 = VERTEX_POINT('',#182704); +#182704 = CARTESIAN_POINT('',(1.,-1.6,1.1)); +#182705 = CIRCLE('',#182706,0.1); +#182706 = AXIS2_PLACEMENT_3D('',#182707,#182708,#182709); +#182707 = CARTESIAN_POINT('',(0.9,-1.6,1.1)); +#182708 = DIRECTION('',(4.4E-16,1.,7.2E-16)); +#182709 = DIRECTION('',(1.,-4.4E-16,-4.670182516061E-48)); +#182710 = PLANE('',#182711); +#182711 = AXIS2_PLACEMENT_3D('',#182712,#182713,#182714); +#182712 = CARTESIAN_POINT('',(0.9,-1.6,1.1)); +#182713 = DIRECTION('',(0.,1.,0.)); +#182714 = DIRECTION('',(0.,-0.,1.)); +#182715 = ADVANCED_FACE('',(#182716),#182759,.F.); +#182716 = FACE_BOUND('',#182717,.F.); +#182717 = EDGE_LOOP('',(#182718,#182750,#182757,#182758)); +#182718 = ORIENTED_EDGE('',*,*,#182719,.T.); +#182719 = EDGE_CURVE('',#182703,#182720,#182722,.T.); +#182720 = VERTEX_POINT('',#182721); +#182721 = CARTESIAN_POINT('',(1.,-1.9,0.35)); +#182722 = ( BOUNDED_CURVE() B_SPLINE_CURVE(10,(#182723,#182724,#182725, + #182726,#182727,#182728,#182729,#182730,#182731,#182732,#182733, + #182734,#182735,#182736,#182737,#182738,#182739,#182740,#182741, + #182742,#182743,#182744,#182745,#182746,#182747,#182748,#182749), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((11,8,8,11),(2.8E-16, +0.392699081699,0.785398163397,1.570796326795),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461069,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461069,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, + 1.669078461068,1.669078461068,1.669078461068,1.669078461068, +1.669078461068,1.669078461068)) REPRESENTATION_ITEM('') ); +#182723 = CARTESIAN_POINT('',(1.,-1.6,1.1)); +#182724 = CARTESIAN_POINT('',(1.,-1.611780972451,1.1)); +#182725 = CARTESIAN_POINT('',(1.,-1.623561944902,1.09871489526)); +#182726 = CARTESIAN_POINT('',(1.,-1.63531768438,1.096144685781)); +#182727 = CARTESIAN_POINT('',(1.,-1.647022957914,1.092292910478)); +#182728 = CARTESIAN_POINT('',(1.,-1.658652625178,1.087166647183)); +#182729 = CARTESIAN_POINT('',(1.,-1.670181731146,1.080776494454)); +#182730 = CARTESIAN_POINT('',(1.,-1.681585598024,1.07313653519)); +#182731 = CARTESIAN_POINT('',(1.,-1.692839915751,1.064264282288)); +#182732 = CARTESIAN_POINT('',(1.,-1.715001745027,1.04409693135)); +#182733 = CARTESIAN_POINT('',(1.,-1.736376713033,1.019180452547)); +#182734 = CARTESIAN_POINT('',(1.,-1.746844169493,1.005559071781)); +#182735 = CARTESIAN_POINT('',(1.,-1.757068827896,0.990801959782)); +#182736 = CARTESIAN_POINT('',(1.,-1.767028545038,0.974939707582)); +#182737 = CARTESIAN_POINT('',(1.,-1.776701887838,0.958005981656)); +#182738 = CARTESIAN_POINT('',(1.,-1.786068212704,0.940037402365)); +#182739 = CARTESIAN_POINT('',(1.,-1.795107740827,0.921073407159)); +#182740 = CARTESIAN_POINT('',(1.,-1.821189404886,0.861321484669)); +#182741 = CARTESIAN_POINT('',(1.,-1.843999726351,0.793391205695)); +#182742 = CARTESIAN_POINT('',(1.,-1.857609938004,0.744826376245)); +#182743 = CARTESIAN_POINT('',(1.,-1.869496756551,0.693380455538)); +#182744 = CARTESIAN_POINT('',(1.,-1.879551569469,0.639485128642)); +#182745 = CARTESIAN_POINT('',(1.,-1.88768564352,0.583600811525)); +#182746 = CARTESIAN_POINT('',(1.,-1.893831497278,0.526209927126)); +#182747 = CARTESIAN_POINT('',(1.,-1.897943832416,0.46780972451)); +#182748 = CARTESIAN_POINT('',(1.,-1.9,0.408904862255)); +#182749 = CARTESIAN_POINT('',(1.,-1.9,0.35)); +#182750 = ORIENTED_EDGE('',*,*,#182751,.F.); +#182751 = EDGE_CURVE('',#182720,#182720,#182752,.T.); +#182752 = CIRCLE('',#182753,0.1); +#182753 = AXIS2_PLACEMENT_3D('',#182754,#182755,#182756); +#182754 = CARTESIAN_POINT('',(0.9,-1.9,0.35)); +#182755 = DIRECTION('',(0.,0.,1.)); +#182756 = DIRECTION('',(1.,0.,-0.)); +#182757 = ORIENTED_EDGE('',*,*,#182719,.F.); +#182758 = ORIENTED_EDGE('',*,*,#182702,.T.); +#182759 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(6,10,( + (#182760,#182761,#182762,#182763,#182764,#182765,#182766,#182767 + ,#182768,#182769,#182770,#182771,#182772,#182773,#182774,#182775 + ,#182776,#182777,#182778,#182779,#182780,#182781,#182782,#182783 + ,#182784,#182785,#182786) + ,(#182787,#182788,#182789,#182790,#182791,#182792,#182793,#182794 + ,#182795,#182796,#182797,#182798,#182799,#182800,#182801,#182802 + ,#182803,#182804,#182805,#182806,#182807,#182808,#182809,#182810 + ,#182811,#182812,#182813) + ,(#182814,#182815,#182816,#182817,#182818,#182819,#182820,#182821 + ,#182822,#182823,#182824,#182825,#182826,#182827,#182828,#182829 + ,#182830,#182831,#182832,#182833,#182834,#182835,#182836,#182837 + ,#182838,#182839,#182840) + ,(#182841,#182842,#182843,#182844,#182845,#182846,#182847,#182848 + ,#182849,#182850,#182851,#182852,#182853,#182854,#182855,#182856 + ,#182857,#182858,#182859,#182860,#182861,#182862,#182863,#182864 + ,#182865,#182866,#182867) + ,(#182868,#182869,#182870,#182871,#182872,#182873,#182874,#182875 + ,#182876,#182877,#182878,#182879,#182880,#182881,#182882,#182883 + ,#182884,#182885,#182886,#182887,#182888,#182889,#182890,#182891 + ,#182892,#182893,#182894) + ,(#182895,#182896,#182897,#182898,#182899,#182900,#182901,#182902 + ,#182903,#182904,#182905,#182906,#182907,#182908,#182909,#182910 + ,#182911,#182912,#182913,#182914,#182915,#182916,#182917,#182918 + ,#182919,#182920,#182921) + ,(#182922,#182923,#182924,#182925,#182926,#182927,#182928,#182929 + ,#182930,#182931,#182932,#182933,#182934,#182935,#182936,#182937 + ,#182938,#182939,#182940,#182941,#182942,#182943,#182944,#182945 + ,#182946,#182947,#182948 +)),.UNSPECIFIED.,.T.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((1,6,6,1),(11, + 8,8,11),(-6.28318530718,0.,6.28318530718,12.56637061436),(2.8E-16, + 0.392699081699,0.785398163397,1.570796326795),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068) + ,(1.03672962321,1.03672962321,1.036729623209,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321) + ,(1.038346699848,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699848,1.038346699847 + ,1.038346699848,1.038346699847,1.038346699848) + ,(0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196,0.853534330196 + ,0.853534330196,0.853534330196,0.853534330196) + ,(1.038346699848,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699847,1.038346699848 + ,1.038346699847,1.038346699848,1.038346699848) + ,(1.03672962321,1.03672962321,1.036729623209,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.036729623209,1.03672962321,1.036729623209,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321,1.03672962321 + ,1.03672962321,1.03672962321,1.03672962321) + ,(1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461069,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068,1.669078461068 + ,1.669078461068,1.669078461068,1.669078461068 +))) REPRESENTATION_ITEM('') SURFACE() ); +#182760 = CARTESIAN_POINT('',(1.,-1.6,1.1)); +#182761 = CARTESIAN_POINT('',(1.,-1.611780972451,1.1)); +#182762 = CARTESIAN_POINT('',(1.,-1.623561944902,1.09871489526)); +#182763 = CARTESIAN_POINT('',(1.,-1.63531768438,1.096144685781)); +#182764 = CARTESIAN_POINT('',(1.,-1.647022957914,1.092292910478)); +#182765 = CARTESIAN_POINT('',(1.,-1.658652625178,1.087166647183)); +#182766 = CARTESIAN_POINT('',(1.,-1.670181731146,1.080776494454)); +#182767 = CARTESIAN_POINT('',(1.,-1.681585598024,1.07313653519)); +#182768 = CARTESIAN_POINT('',(1.,-1.692839915751,1.064264282288)); +#182769 = CARTESIAN_POINT('',(1.,-1.715001745027,1.04409693135)); +#182770 = CARTESIAN_POINT('',(1.,-1.736376713033,1.019180452547)); +#182771 = CARTESIAN_POINT('',(1.,-1.746844169493,1.005559071781)); +#182772 = CARTESIAN_POINT('',(1.,-1.757068827896,0.990801959782)); +#182773 = CARTESIAN_POINT('',(1.,-1.767028545038,0.974939707582)); +#182774 = CARTESIAN_POINT('',(1.,-1.776701887838,0.958005981656)); +#182775 = CARTESIAN_POINT('',(1.,-1.786068212704,0.940037402365)); +#182776 = CARTESIAN_POINT('',(1.,-1.795107740827,0.921073407159)); +#182777 = CARTESIAN_POINT('',(1.,-1.821189404886,0.861321484669)); +#182778 = CARTESIAN_POINT('',(1.,-1.843999726351,0.793391205695)); +#182779 = CARTESIAN_POINT('',(1.,-1.857609938004,0.744826376245)); +#182780 = CARTESIAN_POINT('',(1.,-1.869496756551,0.693380455538)); +#182781 = CARTESIAN_POINT('',(1.,-1.879551569469,0.639485128642)); +#182782 = CARTESIAN_POINT('',(1.,-1.88768564352,0.583600811525)); +#182783 = CARTESIAN_POINT('',(1.,-1.893831497278,0.526209927126)); +#182784 = CARTESIAN_POINT('',(1.,-1.897943832416,0.46780972451)); +#182785 = CARTESIAN_POINT('',(1.,-1.9,0.408904862255)); +#182786 = CARTESIAN_POINT('',(1.,-1.9,0.35)); +#182787 = CARTESIAN_POINT('',(1.,-1.6,0.933845692443)); +#182788 = CARTESIAN_POINT('',(1.,-1.595468811451,0.933845692443)); +#182789 = CARTESIAN_POINT('',(1.,-1.590937622903,0.934339968438)); +#182790 = CARTESIAN_POINT('',(1.,-1.586966713577,0.935327962207)); +#182791 = CARTESIAN_POINT('',(1.,-1.584113250727,0.936581134785)); +#182792 = CARTESIAN_POINT('',(1.,-1.582771380666,0.937617909691)); +#182793 = CARTESIAN_POINT('',(1.,-1.582917208482,0.937941289229)); +#182794 = CARTESIAN_POINT('',(1.,-1.584431750573,0.937263318338)); +#182795 = CARTESIAN_POINT('',(1.,-1.58712619232,0.935364166905)); +#182796 = CARTESIAN_POINT('',(1.,-1.594484413426,0.928889076056)); +#182797 = CARTESIAN_POINT('',(1.,-1.605038673701,0.916815185095)); +#182798 = CARTESIAN_POINT('',(1.,-1.61092908937,0.909317617888)); +#182799 = CARTESIAN_POINT('',(1.,-1.617257806211,0.900359390897)); +#182800 = CARTESIAN_POINT('',(1.,-1.623878977302,0.889974013342)); +#182801 = CARTESIAN_POINT('',(1.,-1.630674252121,0.87821185523)); +#182802 = CARTESIAN_POINT('',(1.,-1.637545709343,0.865131362757)); +#182803 = CARTESIAN_POINT('',(1.,-1.644411120979,0.850795396342)); +#182804 = CARTESIAN_POINT('',(1.,-1.664785109548,0.804218849475)); +#182805 = CARTESIAN_POINT('',(1.,-1.683969772183,0.747540343777)); +#182806 = CARTESIAN_POINT('',(1.,-1.695767328242,0.705802761178)); +#182807 = CARTESIAN_POINT('',(1.,-1.706276230306,0.660671231529)); +#182808 = CARTESIAN_POINT('',(1.,-1.715285238706,0.612701219382)); +#182809 = CARTESIAN_POINT('',(1.,-1.722637969814,0.562449724049)); +#182810 = CARTESIAN_POINT('',(1.,-1.728223672209,0.510481974644)); +#182811 = CARTESIAN_POINT('',(1.,-1.731971733447,0.45736994147)); +#182812 = CARTESIAN_POINT('',(1.,-1.733845692443,0.403684970735)); +#182813 = CARTESIAN_POINT('',(1.,-1.733845692443,0.35)); +#182814 = CARTESIAN_POINT('',(0.794545180945,-1.6,0.909988761675)); +#182815 = CARTESIAN_POINT('',(0.794545180945,-1.59312666275, + 0.909988761675)); +#182816 = CARTESIAN_POINT('',(0.794545180945,-1.586253325501, + 0.91073852646)); +#182817 = CARTESIAN_POINT('',(0.794545180945,-1.58002433706, + 0.912237417659)); +#182818 = CARTESIAN_POINT('',(0.794545180945,-1.575080487442, + 0.914223573871)); +#182819 = CARTESIAN_POINT('',(0.794545180945,-1.571876125386, + 0.916145256173)); +#182820 = CARTESIAN_POINT('',(0.794545180945,-1.570387508192, + 0.917432584686)); +#182821 = CARTESIAN_POINT('',(0.794545180945,-1.570482111551, + 0.917754236839)); +#182822 = CARTESIAN_POINT('',(0.794545180945,-1.571947500788, + 0.9168563041)); +#182823 = CARTESIAN_POINT('',(0.794545180945,-1.577180175705, + 0.912347188771)); +#182824 = CARTESIAN_POINT('',(0.794545180945,-1.586180766509, + 0.902117274854)); +#182825 = CARTESIAN_POINT('',(0.794545180945,-1.591413997018, + 0.895498983053)); +#182826 = CARTESIAN_POINT('',(0.794545180945,-1.597183322956, + 0.887373377257)); +#182827 = CARTESIAN_POINT('',(0.794545180945,-1.603325135653, + 0.87777438569)); +#182828 = CARTESIAN_POINT('',(0.794545180945,-1.609707168892, + 0.8667547767)); +#182829 = CARTESIAN_POINT('',(0.794545180945,-1.616220405581, + 0.854376130303)); +#182830 = CARTESIAN_POINT('',(0.794545180945,-1.622773651091, + 0.840704670057)); +#182831 = CARTESIAN_POINT('',(0.794545180945,-1.642328114599, + 0.796019882897)); +#182832 = CARTESIAN_POINT('',(0.794545180945,-1.660992194331, + 0.740956940346)); +#182833 = CARTESIAN_POINT('',(0.794545180945,-1.672529483897, + 0.700199634202)); +#182834 = CARTESIAN_POINT('',(0.794545180945,-1.682840540604, + 0.655974743644)); +#182835 = CARTESIAN_POINT('',(0.794545180945,-1.691699389275, + 0.60885550585)); +#182836 = CARTESIAN_POINT('',(0.794545180945,-1.698939932834, + 0.55941278786)); +#182837 = CARTESIAN_POINT('',(0.794545180945,-1.704445207027, + 0.508223708343)); +#182838 = CARTESIAN_POINT('',(0.794545180945,-1.708140964731, + 0.455870966301)); +#182839 = CARTESIAN_POINT('',(0.794545180945,-1.709988761675, + 0.402935483151)); +#182840 = CARTESIAN_POINT('',(0.794545180945,-1.709988761675,0.35)); +#182841 = CARTESIAN_POINT('',(0.625088307899,-1.6,1.1)); +#182842 = CARTESIAN_POINT('',(0.625088307899,-1.611780972451,1.1)); +#182843 = CARTESIAN_POINT('',(0.625088307899,-1.623561944902, + 1.09871489526)); +#182844 = CARTESIAN_POINT('',(0.625088307899,-1.63531768438, + 1.096144685781)); +#182845 = CARTESIAN_POINT('',(0.625088307899,-1.647022957914, + 1.092292910478)); +#182846 = CARTESIAN_POINT('',(0.625088307899,-1.658652625178, + 1.087166647183)); +#182847 = CARTESIAN_POINT('',(0.625088307899,-1.670181731146, + 1.080776494454)); +#182848 = CARTESIAN_POINT('',(0.625088307899,-1.681585598024, + 1.07313653519)); +#182849 = CARTESIAN_POINT('',(0.625088307899,-1.692839915751, + 1.064264282288)); +#182850 = CARTESIAN_POINT('',(0.625088307899,-1.715001745027, + 1.04409693135)); +#182851 = CARTESIAN_POINT('',(0.625088307899,-1.736376713033, + 1.019180452547)); +#182852 = CARTESIAN_POINT('',(0.625088307899,-1.746844169493, + 1.005559071781)); +#182853 = CARTESIAN_POINT('',(0.625088307899,-1.757068827896, + 0.990801959782)); +#182854 = CARTESIAN_POINT('',(0.625088307899,-1.767028545038, + 0.974939707582)); +#182855 = CARTESIAN_POINT('',(0.625088307899,-1.776701887838, + 0.958005981656)); +#182856 = CARTESIAN_POINT('',(0.625088307899,-1.786068212704, + 0.940037402365)); +#182857 = CARTESIAN_POINT('',(0.625088307899,-1.795107740827, + 0.921073407159)); +#182858 = CARTESIAN_POINT('',(0.625088307899,-1.821189404886, + 0.861321484669)); +#182859 = CARTESIAN_POINT('',(0.625088307899,-1.843999726351, + 0.793391205695)); +#182860 = CARTESIAN_POINT('',(0.625088307899,-1.857609938004, + 0.744826376245)); +#182861 = CARTESIAN_POINT('',(0.625088307899,-1.869496756551, + 0.693380455538)); +#182862 = CARTESIAN_POINT('',(0.625088307899,-1.879551569469, + 0.639485128642)); +#182863 = CARTESIAN_POINT('',(0.625088307899,-1.88768564352, + 0.583600811525)); +#182864 = CARTESIAN_POINT('',(0.625088307899,-1.893831497278, + 0.526209927126)); +#182865 = CARTESIAN_POINT('',(0.625088307899,-1.897943832416, + 0.46780972451)); +#182866 = CARTESIAN_POINT('',(0.625088307899,-1.9,0.408904862255)); +#182867 = CARTESIAN_POINT('',(0.625088307899,-1.9,0.35)); +#182868 = CARTESIAN_POINT('',(0.794545180945,-1.6,1.290011238325)); +#182869 = CARTESIAN_POINT('',(0.794545180945,-1.630435282152, + 1.290011238325)); +#182870 = CARTESIAN_POINT('',(0.794545180945,-1.660870564303, + 1.28669126406)); +#182871 = CARTESIAN_POINT('',(0.794545180945,-1.690611031701, + 1.280051953903)); +#182872 = CARTESIAN_POINT('',(0.794545180945,-1.718965428386, + 1.270362247085)); +#182873 = CARTESIAN_POINT('',(0.794545180945,-1.74542912497, + 1.258188038194)); +#182874 = CARTESIAN_POINT('',(0.794545180945,-1.769975954101, + 1.244120404223)); +#182875 = CARTESIAN_POINT('',(0.794545180945,-1.792689084496, + 1.22851883354)); +#182876 = CARTESIAN_POINT('',(0.794545180945,-1.813732330715, + 1.211672260476)); +#182877 = CARTESIAN_POINT('',(0.794545180945,-1.852823314348, + 1.175846673928)); +#182878 = CARTESIAN_POINT('',(0.794545180945,-1.886572659558, + 1.136243630239)); +#182879 = CARTESIAN_POINT('',(0.794545180945,-1.902274341968, + 1.115619160508)); +#182880 = CARTESIAN_POINT('',(0.794545180945,-1.916954332835, + 1.094230542308)); +#182881 = CARTESIAN_POINT('',(0.794545180945,-1.930731954422, + 1.072105029474)); +#182882 = CARTESIAN_POINT('',(0.794545180945,-1.943696606784, + 1.049257186613)); +#182883 = CARTESIAN_POINT('',(0.794545180945,-1.955916019827, + 1.025698674426)); +#182884 = CARTESIAN_POINT('',(0.794545180945,-1.967441830564, + 1.001442144261)); +#182885 = CARTESIAN_POINT('',(0.794545180945,-2.000050695173, + 0.926623086441)); +#182886 = CARTESIAN_POINT('',(0.794545180945,-2.02700725837, + 0.845825471045)); +#182887 = CARTESIAN_POINT('',(0.794545180945,-2.042690392111, + 0.789453118288)); +#182888 = CARTESIAN_POINT('',(0.794545180945,-2.056152972497, + 0.730786167432)); +#182889 = CARTESIAN_POINT('',(0.794545180945,-2.067403749663, + 0.670114751433)); +#182890 = CARTESIAN_POINT('',(0.794545180945,-2.076431354206, + 0.607788835189)); +#182891 = CARTESIAN_POINT('',(0.794545180945,-2.083217787528, + 0.544196145908)); +#182892 = CARTESIAN_POINT('',(0.794545180945,-2.087746700102, + 0.479748482718)); +#182893 = CARTESIAN_POINT('',(0.794545180945,-2.090011238325, + 0.414874241359)); +#182894 = CARTESIAN_POINT('',(0.794545180945,-2.090011238325,0.35)); +#182895 = CARTESIAN_POINT('',(1.,-1.6,1.266154307557)); +#182896 = CARTESIAN_POINT('',(1.,-1.62809313345,1.266154307557)); +#182897 = CARTESIAN_POINT('',(1.,-1.656186266901,1.263089822083)); +#182898 = CARTESIAN_POINT('',(1.,-1.683668655184,1.256961409355)); +#182899 = CARTESIAN_POINT('',(1.,-1.709932665101,1.24800468617)); +#182900 = CARTESIAN_POINT('',(1.,-1.734533869689,1.236715384676)); +#182901 = CARTESIAN_POINT('',(1.,-1.75744625381,1.22361169968)); +#182902 = CARTESIAN_POINT('',(1.,-1.778739445474,1.209009752041)); +#182903 = CARTESIAN_POINT('',(1.,-1.798553639183,1.193164397671)); +#182904 = CARTESIAN_POINT('',(1.,-1.835519076628,1.159304786643)); +#182905 = CARTESIAN_POINT('',(1.,-1.867714752366,1.121545719999)); +#182906 = CARTESIAN_POINT('',(1.,-1.882759249615,1.101800525673)); +#182907 = CARTESIAN_POINT('',(1.,-1.89687984958,1.081244528668)); +#182908 = CARTESIAN_POINT('',(1.,-1.910178112773,1.059905401822)); +#182909 = CARTESIAN_POINT('',(1.,-1.922729523555,1.037800108083)); +#182910 = CARTESIAN_POINT('',(1.,-1.934590716065,1.014943441972)); +#182911 = CARTESIAN_POINT('',(1.,-1.945804360676,0.991351417977)); +#182912 = CARTESIAN_POINT('',(1.,-1.977593700224,0.918424119863)); +#182913 = CARTESIAN_POINT('',(1.,-2.004029680519,0.839242067614)); +#182914 = CARTESIAN_POINT('',(1.,-2.019452547766,0.783849991312)); +#182915 = CARTESIAN_POINT('',(1.,-2.032717282796,0.726089679546)); +#182916 = CARTESIAN_POINT('',(1.,-2.043817900231,0.666269037901)); +#182917 = CARTESIAN_POINT('',(1.,-2.052733317226,0.604751899)); +#182918 = CARTESIAN_POINT('',(1.,-2.059439322346,0.541937879607)); +#182919 = CARTESIAN_POINT('',(1.,-2.063915931386,0.478249507549)); +#182920 = CARTESIAN_POINT('',(1.,-2.066154307557,0.414124753775)); +#182921 = CARTESIAN_POINT('',(1.,-2.066154307557,0.35)); +#182922 = CARTESIAN_POINT('',(1.,-1.6,1.1)); +#182923 = CARTESIAN_POINT('',(1.,-1.611780972451,1.1)); +#182924 = CARTESIAN_POINT('',(1.,-1.623561944902,1.09871489526)); +#182925 = CARTESIAN_POINT('',(1.,-1.63531768438,1.096144685781)); +#182926 = CARTESIAN_POINT('',(1.,-1.647022957914,1.092292910478)); +#182927 = CARTESIAN_POINT('',(1.,-1.658652625178,1.087166647183)); +#182928 = CARTESIAN_POINT('',(1.,-1.670181731146,1.080776494454)); +#182929 = CARTESIAN_POINT('',(1.,-1.681585598024,1.07313653519)); +#182930 = CARTESIAN_POINT('',(1.,-1.692839915751,1.064264282288)); +#182931 = CARTESIAN_POINT('',(1.,-1.715001745027,1.04409693135)); +#182932 = CARTESIAN_POINT('',(1.,-1.736376713033,1.019180452547)); +#182933 = CARTESIAN_POINT('',(1.,-1.746844169493,1.005559071781)); +#182934 = CARTESIAN_POINT('',(1.,-1.757068827896,0.990801959782)); +#182935 = CARTESIAN_POINT('',(1.,-1.767028545038,0.974939707582)); +#182936 = CARTESIAN_POINT('',(1.,-1.776701887838,0.958005981656)); +#182937 = CARTESIAN_POINT('',(1.,-1.786068212704,0.940037402365)); +#182938 = CARTESIAN_POINT('',(1.,-1.795107740827,0.921073407159)); +#182939 = CARTESIAN_POINT('',(1.,-1.821189404886,0.861321484669)); +#182940 = CARTESIAN_POINT('',(1.,-1.843999726351,0.793391205695)); +#182941 = CARTESIAN_POINT('',(1.,-1.857609938004,0.744826376245)); +#182942 = CARTESIAN_POINT('',(1.,-1.869496756551,0.693380455538)); +#182943 = CARTESIAN_POINT('',(1.,-1.879551569469,0.639485128642)); +#182944 = CARTESIAN_POINT('',(1.,-1.88768564352,0.583600811525)); +#182945 = CARTESIAN_POINT('',(1.,-1.893831497278,0.526209927126)); +#182946 = CARTESIAN_POINT('',(1.,-1.897943832416,0.46780972451)); +#182947 = CARTESIAN_POINT('',(1.,-1.9,0.408904862255)); +#182948 = CARTESIAN_POINT('',(1.,-1.9,0.35)); +#182949 = ADVANCED_FACE('',(#182950),#182953,.F.); +#182950 = FACE_BOUND('',#182951,.F.); +#182951 = EDGE_LOOP('',(#182952)); +#182952 = ORIENTED_EDGE('',*,*,#182751,.T.); +#182953 = PLANE('',#182954); +#182954 = AXIS2_PLACEMENT_3D('',#182955,#182956,#182957); +#182955 = CARTESIAN_POINT('',(0.9,-1.9,0.35)); +#182956 = DIRECTION('',(0.,0.,1.)); +#182957 = DIRECTION('',(1.,0.,-0.)); +#182958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#182962)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#182959,#182960,#182961)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#182959 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#182960 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#182961 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#182962 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#182959, + 'distance_accuracy_value','confusion accuracy'); +#182963 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#182964,#182966); +#182964 = ( REPRESENTATION_RELATIONSHIP('','',#178735,#178712) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#182965) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#182965 = ITEM_DEFINED_TRANSFORMATION('','',#11,#178713); +#182966 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #182967); +#182967 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('107','=>[0:1:1:50]','',#178707 + ,#178730,$); +#182968 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#178732)); +#182969 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#182970,#182972); +#182970 = ( REPRESENTATION_RELATIONSHIP('','',#156515,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#182971) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#182971 = ITEM_DEFINED_TRANSFORMATION('','',#11,#343); +#182972 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #182973); +#182973 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('109','U_HALL1','',#5,#156510,$ + ); +#182974 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#182975,#182977); +#182975 = ( REPRESENTATION_RELATIONSHIP('','',#156515,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#182976) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#182976 = ITEM_DEFINED_TRANSFORMATION('','',#11,#347); +#182977 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #182978); +#182978 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('110','Q_INV1','',#5,#156510,$ + ); +#182979 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#182980,#182982); +#182980 = ( REPRESENTATION_RELATIONSHIP('','',#31610,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#182981) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#182981 = ITEM_DEFINED_TRANSFORMATION('','',#11,#351); +#182982 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #182983); +#182983 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('111','R_TS1','',#5,#31605,$); +#182984 = SHAPE_DEFINITION_REPRESENTATION(#182985,#182991); +#182985 = PRODUCT_DEFINITION_SHAPE('','',#182986); +#182986 = PRODUCT_DEFINITION('design','',#182987,#182990); +#182987 = PRODUCT_DEFINITION_FORMATION('','',#182988); +#182988 = PRODUCT('snips_controller-unsaved-export-kiHHnP_copper', + 'snips_controller-unsaved-export-kiHHnP_copper','',(#182989)); +#182989 = PRODUCT_CONTEXT('',#2,'mechanical'); +#182990 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#182991 = SHAPE_REPRESENTATION('',(#11,#182992,#183350,#184481,#185402, + #185867,#187089,#187843,#188201,#188664,#189088,#189551,#190014, + #190374,#190732,#191195,#191553,#191911,#192572,#192831,#193189, + #195368,#196522,#198272,#198630,#199324,#200282,#201531,#201856, + #202418,#203044,#203435,#203898,#204522,#204880,#205541,#206196, + #207909,#209065,#210217,#210575,#211038,#211891,#212845,#213407, + #213864,#214321,#214679,#215037,#215692,#216248,#216711,#217063, + #217679,#218435,#220948,#222898,#223559,#223917,#224176,#225926, + #228072,#228727,#229388,#230994,#233891,#235732,#236789,#237246, + #238297,#239554,#240116,#241068,#241725,#242982,#244132,#244488, + #245341,#246592,#247839,#249484,#250300,#251642,#252132,#252490, + #252953,#253309,#255389,#256248,#256606,#258055,#258716,#259268, + #259422,#259755,#260257,#260819,#261152,#261446,#262590,#263107, + #264350,#264702,#265157,#265575,#266626,#266945,#267396,#267946, + #268164,#268419,#268812,#269638,#270095,#270694,#271850,#272771, + #273129,#273221,#273804,#274552,#275036,#275128,#275220,#275312, + #275835,#276290,#277112,#277470,#277562,#277654,#277746,#277838, + #279126,#279218,#279310,#279668,#280026,#280384,#281115,#281207, + #281299,#281391,#281483,#281942,#282601,#282961,#283418,#283510, + #284068,#284921,#285172,#285322,#285740,#285894,#285986,#286171, + #286323,#286576,#286936,#287294,#287918,#289569,#289661,#289753, + #290012,#290271,#290530,#290622,#290714,#290806,#290898,#290990, + #291082,#291174,#291266,#291358,#291450,#291709,#291968,#292425, + #292517,#292609,#293064,#293323,#293582,#294208,#294434,#294693, + #295447,#295902,#295994,#296086,#296178,#297039,#298096,#298718, + #299274,#299634,#299990,#300082,#300174,#300266,#300758,#301184, + #301276,#301368,#301460,#302387,#302745,#303305,#303865,#304124, + #304482,#304906,#305165,#305523,#305881,#305973,#306397,#306821, + #307080,#307172,#307264,#307356,#307448,#307540,#307632,#307724, + #307816,#308277,#309035,#309795,#310353,#310445,#310537,#310629, + #314308,#314732,#315156,#317704,#318101,#318564,#318963,#319358, + #319984,#321546,#322506,#323767,#324919,#325279),#326336); +#182992 = MANIFOLD_SOLID_BREP('',#182993); +#182993 = CLOSED_SHELL('',(#182994,#183034,#183065,#183098,#183129, + #183160,#183191,#183222,#183255,#183277,#183310,#183330)); +#182994 = ADVANCED_FACE('',(#182995),#183029,.T.); +#182995 = FACE_BOUND('',#182996,.T.); +#182996 = EDGE_LOOP('',(#182997,#183007,#183015,#183023)); +#182997 = ORIENTED_EDGE('',*,*,#182998,.T.); +#182998 = EDGE_CURVE('',#182999,#183001,#183003,.T.); +#182999 = VERTEX_POINT('',#183000); +#183000 = CARTESIAN_POINT('',(127.496185,-74.445235,1.51)); +#183001 = VERTEX_POINT('',#183002); +#183002 = CARTESIAN_POINT('',(127.496185,-74.445235,1.545)); +#183003 = LINE('',#183004,#183005); +#183004 = CARTESIAN_POINT('',(127.496185,-74.445235,1.51)); +#183005 = VECTOR('',#183006,1.); +#183006 = DIRECTION('',(0.,0.,1.)); +#183007 = ORIENTED_EDGE('',*,*,#183008,.T.); +#183008 = EDGE_CURVE('',#183001,#183009,#183011,.T.); +#183009 = VERTEX_POINT('',#183010); +#183010 = CARTESIAN_POINT('',(122.7,-79.241421,1.545)); +#183011 = LINE('',#183012,#183013); +#183012 = CARTESIAN_POINT('',(127.496185,-74.445235,1.545)); +#183013 = VECTOR('',#183014,1.); +#183014 = DIRECTION('',(-0.707106707471,-0.707106854902,0.)); +#183015 = ORIENTED_EDGE('',*,*,#183016,.F.); +#183016 = EDGE_CURVE('',#183017,#183009,#183019,.T.); +#183017 = VERTEX_POINT('',#183018); +#183018 = CARTESIAN_POINT('',(122.7,-79.241421,1.51)); +#183019 = LINE('',#183020,#183021); +#183020 = CARTESIAN_POINT('',(122.7,-79.241421,1.51)); +#183021 = VECTOR('',#183022,1.); +#183022 = DIRECTION('',(0.,0.,1.)); +#183023 = ORIENTED_EDGE('',*,*,#183024,.F.); +#183024 = EDGE_CURVE('',#182999,#183017,#183025,.T.); +#183025 = LINE('',#183026,#183027); +#183026 = CARTESIAN_POINT('',(127.496185,-74.445235,1.51)); +#183027 = VECTOR('',#183028,1.); +#183028 = DIRECTION('',(-0.707106707471,-0.707106854902,0.)); +#183029 = PLANE('',#183030); +#183030 = AXIS2_PLACEMENT_3D('',#183031,#183032,#183033); +#183031 = CARTESIAN_POINT('',(127.496185,-74.445235,1.51)); +#183032 = DIRECTION('',(0.707106854902,-0.707106707471,0.)); +#183033 = DIRECTION('',(-0.707106707471,-0.707106854902,0.)); +#183034 = ADVANCED_FACE('',(#183035),#183060,.T.); +#183035 = FACE_BOUND('',#183036,.T.); +#183036 = EDGE_LOOP('',(#183037,#183038,#183046,#183054)); +#183037 = ORIENTED_EDGE('',*,*,#183016,.T.); +#183038 = ORIENTED_EDGE('',*,*,#183039,.T.); +#183039 = EDGE_CURVE('',#183009,#183040,#183042,.T.); +#183040 = VERTEX_POINT('',#183041); +#183041 = CARTESIAN_POINT('',(122.698079,-82.819509,1.545)); +#183042 = LINE('',#183043,#183044); +#183043 = CARTESIAN_POINT('',(122.7,-79.241421,1.545)); +#183044 = VECTOR('',#183045,1.); +#183045 = DIRECTION('',(-5.368788367258E-04,-0.999999855881,0.)); +#183046 = ORIENTED_EDGE('',*,*,#183047,.F.); +#183047 = EDGE_CURVE('',#183048,#183040,#183050,.T.); +#183048 = VERTEX_POINT('',#183049); +#183049 = CARTESIAN_POINT('',(122.698079,-82.819509,1.51)); +#183050 = LINE('',#183051,#183052); +#183051 = CARTESIAN_POINT('',(122.698079,-82.819509,1.51)); +#183052 = VECTOR('',#183053,1.); +#183053 = DIRECTION('',(0.,0.,1.)); +#183054 = ORIENTED_EDGE('',*,*,#183055,.F.); +#183055 = EDGE_CURVE('',#183017,#183048,#183056,.T.); +#183056 = LINE('',#183057,#183058); +#183057 = CARTESIAN_POINT('',(122.7,-79.241421,1.51)); +#183058 = VECTOR('',#183059,1.); +#183059 = DIRECTION('',(-5.368788367258E-04,-0.999999855881,0.)); +#183060 = PLANE('',#183061); +#183061 = AXIS2_PLACEMENT_3D('',#183062,#183063,#183064); +#183062 = CARTESIAN_POINT('',(122.7,-79.241421,1.51)); +#183063 = DIRECTION('',(0.999999855881,-5.368788367258E-04,0.)); +#183064 = DIRECTION('',(-5.368788367258E-04,-0.999999855881,0.)); +#183065 = ADVANCED_FACE('',(#183066),#183093,.T.); +#183066 = FACE_BOUND('',#183067,.T.); +#183067 = EDGE_LOOP('',(#183068,#183069,#183078,#183086)); +#183068 = ORIENTED_EDGE('',*,*,#183047,.T.); +#183069 = ORIENTED_EDGE('',*,*,#183070,.T.); +#183070 = EDGE_CURVE('',#183040,#183071,#183073,.T.); +#183071 = VERTEX_POINT('',#183072); +#183072 = CARTESIAN_POINT('',(122.501921,-82.819509,1.545)); +#183073 = CIRCLE('',#183074,0.100000456609); +#183074 = AXIS2_PLACEMENT_3D('',#183075,#183076,#183077); +#183075 = CARTESIAN_POINT('',(122.6,-82.8,1.545)); +#183076 = DIRECTION('',(-0.,0.,-1.)); +#183077 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#183078 = ORIENTED_EDGE('',*,*,#183079,.F.); +#183079 = EDGE_CURVE('',#183080,#183071,#183082,.T.); +#183080 = VERTEX_POINT('',#183081); +#183081 = CARTESIAN_POINT('',(122.501921,-82.819509,1.51)); +#183082 = LINE('',#183083,#183084); +#183083 = CARTESIAN_POINT('',(122.501921,-82.819509,1.51)); +#183084 = VECTOR('',#183085,1.); +#183085 = DIRECTION('',(0.,0.,1.)); +#183086 = ORIENTED_EDGE('',*,*,#183087,.F.); +#183087 = EDGE_CURVE('',#183048,#183080,#183088,.T.); +#183088 = CIRCLE('',#183089,0.100000456609); +#183089 = AXIS2_PLACEMENT_3D('',#183090,#183091,#183092); +#183090 = CARTESIAN_POINT('',(122.6,-82.8,1.51)); +#183091 = DIRECTION('',(-0.,0.,-1.)); +#183092 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#183093 = CYLINDRICAL_SURFACE('',#183094,0.100000456609); +#183094 = AXIS2_PLACEMENT_3D('',#183095,#183096,#183097); +#183095 = CARTESIAN_POINT('',(122.6,-82.8,1.51)); +#183096 = DIRECTION('',(-0.,0.,-1.)); +#183097 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#183098 = ADVANCED_FACE('',(#183099),#183124,.T.); +#183099 = FACE_BOUND('',#183100,.T.); +#183100 = EDGE_LOOP('',(#183101,#183102,#183110,#183118)); +#183101 = ORIENTED_EDGE('',*,*,#183079,.T.); +#183102 = ORIENTED_EDGE('',*,*,#183103,.T.); +#183103 = EDGE_CURVE('',#183071,#183104,#183106,.T.); +#183104 = VERTEX_POINT('',#183105); +#183105 = CARTESIAN_POINT('',(122.501921,-79.180491,1.545)); +#183106 = LINE('',#183107,#183108); +#183107 = CARTESIAN_POINT('',(122.501921,-82.819509,1.545)); +#183108 = VECTOR('',#183109,1.); +#183109 = DIRECTION('',(0.,1.,0.)); +#183110 = ORIENTED_EDGE('',*,*,#183111,.F.); +#183111 = EDGE_CURVE('',#183112,#183104,#183114,.T.); +#183112 = VERTEX_POINT('',#183113); +#183113 = CARTESIAN_POINT('',(122.501921,-79.180491,1.51)); +#183114 = LINE('',#183115,#183116); +#183115 = CARTESIAN_POINT('',(122.501921,-79.180491,1.51)); +#183116 = VECTOR('',#183117,1.); +#183117 = DIRECTION('',(0.,0.,1.)); +#183118 = ORIENTED_EDGE('',*,*,#183119,.F.); +#183119 = EDGE_CURVE('',#183080,#183112,#183120,.T.); +#183120 = LINE('',#183121,#183122); +#183121 = CARTESIAN_POINT('',(122.501921,-82.819509,1.51)); +#183122 = VECTOR('',#183123,1.); +#183123 = DIRECTION('',(0.,1.,0.)); +#183124 = PLANE('',#183125); +#183125 = AXIS2_PLACEMENT_3D('',#183126,#183127,#183128); +#183126 = CARTESIAN_POINT('',(122.501921,-82.819509,1.51)); +#183127 = DIRECTION('',(-1.,0.,0.)); +#183128 = DIRECTION('',(0.,1.,0.)); +#183129 = ADVANCED_FACE('',(#183130),#183155,.T.); +#183130 = FACE_BOUND('',#183131,.T.); +#183131 = EDGE_LOOP('',(#183132,#183133,#183141,#183149)); +#183132 = ORIENTED_EDGE('',*,*,#183111,.T.); +#183133 = ORIENTED_EDGE('',*,*,#183134,.T.); +#183134 = EDGE_CURVE('',#183104,#183135,#183137,.T.); +#183135 = VERTEX_POINT('',#183136); +#183136 = CARTESIAN_POINT('',(122.516853,-79.144443,1.545)); +#183137 = LINE('',#183138,#183139); +#183138 = CARTESIAN_POINT('',(122.501921,-79.180491,1.545)); +#183139 = VECTOR('',#183140,1.); +#183140 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#183141 = ORIENTED_EDGE('',*,*,#183142,.F.); +#183142 = EDGE_CURVE('',#183143,#183135,#183145,.T.); +#183143 = VERTEX_POINT('',#183144); +#183144 = CARTESIAN_POINT('',(122.516853,-79.144443,1.51)); +#183145 = LINE('',#183146,#183147); +#183146 = CARTESIAN_POINT('',(122.516853,-79.144443,1.51)); +#183147 = VECTOR('',#183148,1.); +#183148 = DIRECTION('',(0.,0.,1.)); +#183149 = ORIENTED_EDGE('',*,*,#183150,.F.); +#183150 = EDGE_CURVE('',#183112,#183143,#183151,.T.); +#183151 = LINE('',#183152,#183153); +#183152 = CARTESIAN_POINT('',(122.501921,-79.180491,1.51)); +#183153 = VECTOR('',#183154,1.); +#183154 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#183155 = PLANE('',#183156); +#183156 = AXIS2_PLACEMENT_3D('',#183157,#183158,#183159); +#183157 = CARTESIAN_POINT('',(122.501921,-79.180491,1.51)); +#183158 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#183159 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#183160 = ADVANCED_FACE('',(#183161),#183186,.T.); +#183161 = FACE_BOUND('',#183162,.T.); +#183162 = EDGE_LOOP('',(#183163,#183164,#183172,#183180)); +#183163 = ORIENTED_EDGE('',*,*,#183142,.T.); +#183164 = ORIENTED_EDGE('',*,*,#183165,.T.); +#183165 = EDGE_CURVE('',#183135,#183166,#183168,.T.); +#183166 = VERTEX_POINT('',#183167); +#183167 = CARTESIAN_POINT('',(127.354764,-74.303814,1.545)); +#183168 = LINE('',#183169,#183170); +#183169 = CARTESIAN_POINT('',(122.516853,-79.144443,1.545)); +#183170 = VECTOR('',#183171,1.); +#183171 = DIRECTION('',(0.706908178296,0.707305328312,0.)); +#183172 = ORIENTED_EDGE('',*,*,#183173,.F.); +#183173 = EDGE_CURVE('',#183174,#183166,#183176,.T.); +#183174 = VERTEX_POINT('',#183175); +#183175 = CARTESIAN_POINT('',(127.354764,-74.303814,1.51)); +#183176 = LINE('',#183177,#183178); +#183177 = CARTESIAN_POINT('',(127.354764,-74.303814,1.51)); +#183178 = VECTOR('',#183179,1.); +#183179 = DIRECTION('',(0.,0.,1.)); +#183180 = ORIENTED_EDGE('',*,*,#183181,.F.); +#183181 = EDGE_CURVE('',#183143,#183174,#183182,.T.); +#183182 = LINE('',#183183,#183184); +#183183 = CARTESIAN_POINT('',(122.516853,-79.144443,1.51)); +#183184 = VECTOR('',#183185,1.); +#183185 = DIRECTION('',(0.706908178296,0.707305328312,0.)); +#183186 = PLANE('',#183187); +#183187 = AXIS2_PLACEMENT_3D('',#183188,#183189,#183190); +#183188 = CARTESIAN_POINT('',(122.516853,-79.144443,1.51)); +#183189 = DIRECTION('',(-0.707305328312,0.706908178296,0.)); +#183190 = DIRECTION('',(0.706908178296,0.707305328312,0.)); +#183191 = ADVANCED_FACE('',(#183192),#183217,.T.); +#183192 = FACE_BOUND('',#183193,.T.); +#183193 = EDGE_LOOP('',(#183194,#183195,#183203,#183211)); +#183194 = ORIENTED_EDGE('',*,*,#183173,.T.); +#183195 = ORIENTED_EDGE('',*,*,#183196,.T.); +#183196 = EDGE_CURVE('',#183166,#183197,#183199,.T.); +#183197 = VERTEX_POINT('',#183198); +#183198 = CARTESIAN_POINT('',(127.347101,-74.29054,1.545)); +#183199 = LINE('',#183200,#183201); +#183200 = CARTESIAN_POINT('',(127.354764,-74.303814,1.545)); +#183201 = VECTOR('',#183202,1.); +#183202 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#183203 = ORIENTED_EDGE('',*,*,#183204,.F.); +#183204 = EDGE_CURVE('',#183205,#183197,#183207,.T.); +#183205 = VERTEX_POINT('',#183206); +#183206 = CARTESIAN_POINT('',(127.347101,-74.29054,1.51)); +#183207 = LINE('',#183208,#183209); +#183208 = CARTESIAN_POINT('',(127.347101,-74.29054,1.51)); +#183209 = VECTOR('',#183210,1.); +#183210 = DIRECTION('',(0.,0.,1.)); +#183211 = ORIENTED_EDGE('',*,*,#183212,.F.); +#183212 = EDGE_CURVE('',#183174,#183205,#183213,.T.); +#183213 = LINE('',#183214,#183215); +#183214 = CARTESIAN_POINT('',(127.354764,-74.303814,1.51)); +#183215 = VECTOR('',#183216,1.); +#183216 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#183217 = PLANE('',#183218); +#183218 = AXIS2_PLACEMENT_3D('',#183219,#183220,#183221); +#183219 = CARTESIAN_POINT('',(127.354764,-74.303814,1.51)); +#183220 = DIRECTION('',(-0.86604652018,-0.499963423546,0.)); +#183221 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#183222 = ADVANCED_FACE('',(#183223),#183250,.T.); +#183223 = FACE_BOUND('',#183224,.T.); +#183224 = EDGE_LOOP('',(#183225,#183226,#183235,#183243)); +#183225 = ORIENTED_EDGE('',*,*,#183204,.T.); +#183226 = ORIENTED_EDGE('',*,*,#183227,.T.); +#183227 = EDGE_CURVE('',#183197,#183228,#183230,.T.); +#183228 = VERTEX_POINT('',#183229); +#183229 = CARTESIAN_POINT('',(127.50946,-74.452899,1.545)); +#183230 = CIRCLE('',#183231,0.300000118202); +#183231 = AXIS2_PLACEMENT_3D('',#183232,#183233,#183234); +#183232 = CARTESIAN_POINT('',(127.624265,-74.175735,1.545)); +#183233 = DIRECTION('',(0.,0.,-1.)); +#183234 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#183235 = ORIENTED_EDGE('',*,*,#183236,.F.); +#183236 = EDGE_CURVE('',#183237,#183228,#183239,.T.); +#183237 = VERTEX_POINT('',#183238); +#183238 = CARTESIAN_POINT('',(127.50946,-74.452899,1.51)); +#183239 = LINE('',#183240,#183241); +#183240 = CARTESIAN_POINT('',(127.50946,-74.452899,1.51)); +#183241 = VECTOR('',#183242,1.); +#183242 = DIRECTION('',(0.,0.,1.)); +#183243 = ORIENTED_EDGE('',*,*,#183244,.F.); +#183244 = EDGE_CURVE('',#183205,#183237,#183245,.T.); +#183245 = CIRCLE('',#183246,0.300000118202); +#183246 = AXIS2_PLACEMENT_3D('',#183247,#183248,#183249); +#183247 = CARTESIAN_POINT('',(127.624265,-74.175735,1.51)); +#183248 = DIRECTION('',(0.,0.,-1.)); +#183249 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#183250 = CYLINDRICAL_SURFACE('',#183251,0.300000118202); +#183251 = AXIS2_PLACEMENT_3D('',#183252,#183253,#183254); +#183252 = CARTESIAN_POINT('',(127.624265,-74.175735,1.51)); +#183253 = DIRECTION('',(0.,0.,-1.)); +#183254 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#183255 = ADVANCED_FACE('',(#183256),#183272,.T.); +#183256 = FACE_BOUND('',#183257,.T.); +#183257 = EDGE_LOOP('',(#183258,#183259,#183265,#183266)); +#183258 = ORIENTED_EDGE('',*,*,#183236,.T.); +#183259 = ORIENTED_EDGE('',*,*,#183260,.T.); +#183260 = EDGE_CURVE('',#183228,#183001,#183261,.T.); +#183261 = LINE('',#183262,#183263); +#183262 = CARTESIAN_POINT('',(127.50946,-74.452899,1.545)); +#183263 = VECTOR('',#183264,1.); +#183264 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#183265 = ORIENTED_EDGE('',*,*,#182998,.F.); +#183266 = ORIENTED_EDGE('',*,*,#183267,.F.); +#183267 = EDGE_CURVE('',#183237,#182999,#183268,.T.); +#183268 = LINE('',#183269,#183270); +#183269 = CARTESIAN_POINT('',(127.50946,-74.452899,1.51)); +#183270 = VECTOR('',#183271,1.); +#183271 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#183272 = PLANE('',#183273); +#183273 = AXIS2_PLACEMENT_3D('',#183274,#183275,#183276); +#183274 = CARTESIAN_POINT('',(127.50946,-74.452899,1.51)); +#183275 = DIRECTION('',(-0.499984106787,-0.866034579541,0.)); +#183276 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#183277 = ADVANCED_FACE('',(#183278),#183305,.F.); +#183278 = FACE_BOUND('',#183279,.T.); +#183279 = EDGE_LOOP('',(#183280,#183290,#183297,#183298)); +#183280 = ORIENTED_EDGE('',*,*,#183281,.T.); +#183281 = EDGE_CURVE('',#183282,#183284,#183286,.T.); +#183282 = VERTEX_POINT('',#183283); +#183283 = CARTESIAN_POINT('',(127.76152,-74.175735,1.51)); +#183284 = VERTEX_POINT('',#183285); +#183285 = CARTESIAN_POINT('',(127.76152,-74.175735,1.545)); +#183286 = LINE('',#183287,#183288); +#183287 = CARTESIAN_POINT('',(127.76152,-74.175735,1.51)); +#183288 = VECTOR('',#183289,1.); +#183289 = DIRECTION('',(0.,0.,1.)); +#183290 = ORIENTED_EDGE('',*,*,#183291,.T.); +#183291 = EDGE_CURVE('',#183284,#183284,#183292,.T.); +#183292 = CIRCLE('',#183293,0.137255); +#183293 = AXIS2_PLACEMENT_3D('',#183294,#183295,#183296); +#183294 = CARTESIAN_POINT('',(127.624265,-74.175735,1.545)); +#183295 = DIRECTION('',(0.,0.,1.)); +#183296 = DIRECTION('',(1.,0.,-0.)); +#183297 = ORIENTED_EDGE('',*,*,#183281,.F.); +#183298 = ORIENTED_EDGE('',*,*,#183299,.F.); +#183299 = EDGE_CURVE('',#183282,#183282,#183300,.T.); +#183300 = CIRCLE('',#183301,0.137255); +#183301 = AXIS2_PLACEMENT_3D('',#183302,#183303,#183304); +#183302 = CARTESIAN_POINT('',(127.624265,-74.175735,1.51)); +#183303 = DIRECTION('',(0.,0.,1.)); +#183304 = DIRECTION('',(1.,0.,-0.)); +#183305 = CYLINDRICAL_SURFACE('',#183306,0.137255); +#183306 = AXIS2_PLACEMENT_3D('',#183307,#183308,#183309); +#183307 = CARTESIAN_POINT('',(127.624265,-74.175735,1.51)); +#183308 = DIRECTION('',(-0.,-0.,-1.)); +#183309 = DIRECTION('',(1.,0.,-0.)); +#183310 = ADVANCED_FACE('',(#183311,#183322),#183325,.F.); +#183311 = FACE_BOUND('',#183312,.T.); +#183312 = EDGE_LOOP('',(#183313,#183314,#183315,#183316,#183317,#183318, + #183319,#183320,#183321)); +#183313 = ORIENTED_EDGE('',*,*,#183024,.T.); +#183314 = ORIENTED_EDGE('',*,*,#183055,.T.); +#183315 = ORIENTED_EDGE('',*,*,#183087,.T.); +#183316 = ORIENTED_EDGE('',*,*,#183119,.T.); +#183317 = ORIENTED_EDGE('',*,*,#183150,.T.); +#183318 = ORIENTED_EDGE('',*,*,#183181,.T.); +#183319 = ORIENTED_EDGE('',*,*,#183212,.T.); +#183320 = ORIENTED_EDGE('',*,*,#183244,.T.); +#183321 = ORIENTED_EDGE('',*,*,#183267,.T.); +#183322 = FACE_BOUND('',#183323,.T.); +#183323 = EDGE_LOOP('',(#183324)); +#183324 = ORIENTED_EDGE('',*,*,#183299,.T.); +#183325 = PLANE('',#183326); +#183326 = AXIS2_PLACEMENT_3D('',#183327,#183328,#183329); +#183327 = CARTESIAN_POINT('',(0.,0.,1.51)); +#183328 = DIRECTION('',(0.,0.,1.)); +#183329 = DIRECTION('',(1.,0.,-0.)); +#183330 = ADVANCED_FACE('',(#183331,#183342),#183345,.T.); +#183331 = FACE_BOUND('',#183332,.F.); +#183332 = EDGE_LOOP('',(#183333,#183334,#183335,#183336,#183337,#183338, + #183339,#183340,#183341)); +#183333 = ORIENTED_EDGE('',*,*,#183008,.T.); +#183334 = ORIENTED_EDGE('',*,*,#183039,.T.); +#183335 = ORIENTED_EDGE('',*,*,#183070,.T.); +#183336 = ORIENTED_EDGE('',*,*,#183103,.T.); +#183337 = ORIENTED_EDGE('',*,*,#183134,.T.); +#183338 = ORIENTED_EDGE('',*,*,#183165,.T.); +#183339 = ORIENTED_EDGE('',*,*,#183196,.T.); +#183340 = ORIENTED_EDGE('',*,*,#183227,.T.); +#183341 = ORIENTED_EDGE('',*,*,#183260,.T.); +#183342 = FACE_BOUND('',#183343,.F.); +#183343 = EDGE_LOOP('',(#183344)); +#183344 = ORIENTED_EDGE('',*,*,#183291,.T.); +#183345 = PLANE('',#183346); +#183346 = AXIS2_PLACEMENT_3D('',#183347,#183348,#183349); +#183347 = CARTESIAN_POINT('',(0.,0.,1.545)); +#183348 = DIRECTION('',(0.,0.,1.)); +#183349 = DIRECTION('',(1.,0.,-0.)); +#183350 = MANIFOLD_SOLID_BREP('',#183351); +#183351 = CLOSED_SHELL('',(#183352,#183392,#183423,#183454,#183485, + #183518,#183549,#183580,#183611,#183642,#183673,#183704,#183737, + #183768,#183799,#183830,#183861,#183894,#183925,#183956,#183989, + #184020,#184051,#184082,#184113,#184146,#184177,#184208,#184239, + #184270,#184303,#184325,#184358,#184391,#184436)); +#183352 = ADVANCED_FACE('',(#183353),#183387,.T.); +#183353 = FACE_BOUND('',#183354,.T.); +#183354 = EDGE_LOOP('',(#183355,#183365,#183373,#183381)); +#183355 = ORIENTED_EDGE('',*,*,#183356,.T.); +#183356 = EDGE_CURVE('',#183357,#183359,#183361,.T.); +#183357 = VERTEX_POINT('',#183358); +#183358 = CARTESIAN_POINT('',(131.231131,-77.1,1.51)); +#183359 = VERTEX_POINT('',#183360); +#183360 = CARTESIAN_POINT('',(131.231131,-77.1,1.545)); +#183361 = LINE('',#183362,#183363); +#183362 = CARTESIAN_POINT('',(131.231131,-77.1,1.51)); +#183363 = VECTOR('',#183364,1.); +#183364 = DIRECTION('',(0.,0.,1.)); +#183365 = ORIENTED_EDGE('',*,*,#183366,.T.); +#183366 = EDGE_CURVE('',#183359,#183367,#183369,.T.); +#183367 = VERTEX_POINT('',#183368); +#183368 = CARTESIAN_POINT('',(131.769509,-77.101921,1.545)); +#183369 = LINE('',#183370,#183371); +#183370 = CARTESIAN_POINT('',(131.231131,-77.1,1.545)); +#183371 = VECTOR('',#183372,1.); +#183372 = DIRECTION('',(0.999993634303,-3.568102284094E-03,0.)); +#183373 = ORIENTED_EDGE('',*,*,#183374,.F.); +#183374 = EDGE_CURVE('',#183375,#183367,#183377,.T.); +#183375 = VERTEX_POINT('',#183376); +#183376 = CARTESIAN_POINT('',(131.769509,-77.101921,1.51)); +#183377 = LINE('',#183378,#183379); +#183378 = CARTESIAN_POINT('',(131.769509,-77.101921,1.51)); +#183379 = VECTOR('',#183380,1.); +#183380 = DIRECTION('',(0.,0.,1.)); +#183381 = ORIENTED_EDGE('',*,*,#183382,.F.); +#183382 = EDGE_CURVE('',#183357,#183375,#183383,.T.); +#183383 = LINE('',#183384,#183385); +#183384 = CARTESIAN_POINT('',(131.231131,-77.1,1.51)); +#183385 = VECTOR('',#183386,1.); +#183386 = DIRECTION('',(0.999993634303,-3.568102284094E-03,0.)); +#183387 = PLANE('',#183388); +#183388 = AXIS2_PLACEMENT_3D('',#183389,#183390,#183391); +#183389 = CARTESIAN_POINT('',(131.231131,-77.1,1.51)); +#183390 = DIRECTION('',(3.568102284094E-03,0.999993634303,-0.)); +#183391 = DIRECTION('',(0.999993634303,-3.568102284094E-03,0.)); +#183392 = ADVANCED_FACE('',(#183393),#183418,.T.); +#183393 = FACE_BOUND('',#183394,.T.); +#183394 = EDGE_LOOP('',(#183395,#183396,#183404,#183412)); +#183395 = ORIENTED_EDGE('',*,*,#183374,.T.); +#183396 = ORIENTED_EDGE('',*,*,#183397,.T.); +#183397 = EDGE_CURVE('',#183367,#183398,#183400,.T.); +#183398 = VERTEX_POINT('',#183399); +#183399 = CARTESIAN_POINT('',(131.805557,-77.116853,1.545)); +#183400 = LINE('',#183401,#183402); +#183401 = CARTESIAN_POINT('',(131.769509,-77.101921,1.545)); +#183402 = VECTOR('',#183403,1.); +#183403 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183404 = ORIENTED_EDGE('',*,*,#183405,.F.); +#183405 = EDGE_CURVE('',#183406,#183398,#183408,.T.); +#183406 = VERTEX_POINT('',#183407); +#183407 = CARTESIAN_POINT('',(131.805557,-77.116853,1.51)); +#183408 = LINE('',#183409,#183410); +#183409 = CARTESIAN_POINT('',(131.805557,-77.116853,1.51)); +#183410 = VECTOR('',#183411,1.); +#183411 = DIRECTION('',(0.,0.,1.)); +#183412 = ORIENTED_EDGE('',*,*,#183413,.F.); +#183413 = EDGE_CURVE('',#183375,#183406,#183414,.T.); +#183414 = LINE('',#183415,#183416); +#183415 = CARTESIAN_POINT('',(131.769509,-77.101921,1.51)); +#183416 = VECTOR('',#183417,1.); +#183417 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183418 = PLANE('',#183419); +#183419 = AXIS2_PLACEMENT_3D('',#183420,#183421,#183422); +#183420 = CARTESIAN_POINT('',(131.769509,-77.101921,1.51)); +#183421 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#183422 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183423 = ADVANCED_FACE('',(#183424),#183449,.T.); +#183424 = FACE_BOUND('',#183425,.T.); +#183425 = EDGE_LOOP('',(#183426,#183427,#183435,#183443)); +#183426 = ORIENTED_EDGE('',*,*,#183405,.T.); +#183427 = ORIENTED_EDGE('',*,*,#183428,.T.); +#183428 = EDGE_CURVE('',#183398,#183429,#183431,.T.); +#183429 = VERTEX_POINT('',#183430); +#183430 = CARTESIAN_POINT('',(133.22192,-78.530499,1.545)); +#183431 = LINE('',#183432,#183433); +#183432 = CARTESIAN_POINT('',(131.805557,-77.116853,1.545)); +#183433 = VECTOR('',#183434,1.); +#183434 = DIRECTION('',(0.707785325316,-0.706427585296,0.)); +#183435 = ORIENTED_EDGE('',*,*,#183436,.F.); +#183436 = EDGE_CURVE('',#183437,#183429,#183439,.T.); +#183437 = VERTEX_POINT('',#183438); +#183438 = CARTESIAN_POINT('',(133.22192,-78.530499,1.51)); +#183439 = LINE('',#183440,#183441); +#183440 = CARTESIAN_POINT('',(133.22192,-78.530499,1.51)); +#183441 = VECTOR('',#183442,1.); +#183442 = DIRECTION('',(0.,0.,1.)); +#183443 = ORIENTED_EDGE('',*,*,#183444,.F.); +#183444 = EDGE_CURVE('',#183406,#183437,#183445,.T.); +#183445 = LINE('',#183446,#183447); +#183446 = CARTESIAN_POINT('',(131.805557,-77.116853,1.51)); +#183447 = VECTOR('',#183448,1.); +#183448 = DIRECTION('',(0.707785325316,-0.706427585296,0.)); +#183449 = PLANE('',#183450); +#183450 = AXIS2_PLACEMENT_3D('',#183451,#183452,#183453); +#183451 = CARTESIAN_POINT('',(131.805557,-77.116853,1.51)); +#183452 = DIRECTION('',(0.706427585296,0.707785325316,-0.)); +#183453 = DIRECTION('',(0.707785325316,-0.706427585296,0.)); +#183454 = ADVANCED_FACE('',(#183455),#183480,.T.); +#183455 = FACE_BOUND('',#183456,.T.); +#183456 = EDGE_LOOP('',(#183457,#183458,#183466,#183474)); +#183457 = ORIENTED_EDGE('',*,*,#183436,.T.); +#183458 = ORIENTED_EDGE('',*,*,#183459,.T.); +#183459 = EDGE_CURVE('',#183429,#183460,#183462,.T.); +#183460 = VERTEX_POINT('',#183461); +#183461 = CARTESIAN_POINT('',(133.235195,-78.522836,1.545)); +#183462 = LINE('',#183463,#183464); +#183463 = CARTESIAN_POINT('',(133.22192,-78.530499,1.545)); +#183464 = VECTOR('',#183465,1.); +#183465 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#183466 = ORIENTED_EDGE('',*,*,#183467,.F.); +#183467 = EDGE_CURVE('',#183468,#183460,#183470,.T.); +#183468 = VERTEX_POINT('',#183469); +#183469 = CARTESIAN_POINT('',(133.235195,-78.522836,1.51)); +#183470 = LINE('',#183471,#183472); +#183471 = CARTESIAN_POINT('',(133.235195,-78.522836,1.51)); +#183472 = VECTOR('',#183473,1.); +#183473 = DIRECTION('',(0.,0.,1.)); +#183474 = ORIENTED_EDGE('',*,*,#183475,.F.); +#183475 = EDGE_CURVE('',#183437,#183468,#183476,.T.); +#183476 = LINE('',#183477,#183478); +#183477 = CARTESIAN_POINT('',(133.22192,-78.530499,1.51)); +#183478 = VECTOR('',#183479,1.); +#183479 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#183480 = PLANE('',#183481); +#183481 = AXIS2_PLACEMENT_3D('',#183482,#183483,#183484); +#183482 = CARTESIAN_POINT('',(133.22192,-78.530499,1.51)); +#183483 = DIRECTION('',(-0.49993517485,0.866062827368,0.)); +#183484 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#183485 = ADVANCED_FACE('',(#183486),#183513,.T.); +#183486 = FACE_BOUND('',#183487,.T.); +#183487 = EDGE_LOOP('',(#183488,#183489,#183498,#183506)); +#183488 = ORIENTED_EDGE('',*,*,#183467,.T.); +#183489 = ORIENTED_EDGE('',*,*,#183490,.T.); +#183490 = EDGE_CURVE('',#183460,#183491,#183493,.T.); +#183491 = VERTEX_POINT('',#183492); +#183492 = CARTESIAN_POINT('',(133.532628,-78.561994,1.545)); +#183493 = CIRCLE('',#183494,0.30000227878); +#183494 = AXIS2_PLACEMENT_3D('',#183495,#183496,#183497); +#183495 = CARTESIAN_POINT('',(133.34999926808,-78.80000264175,1.545)); +#183496 = DIRECTION('',(0.,0.,-1.)); +#183497 = DIRECTION('',(-0.382677986812,0.923881788114,0.)); +#183498 = ORIENTED_EDGE('',*,*,#183499,.F.); +#183499 = EDGE_CURVE('',#183500,#183491,#183502,.T.); +#183500 = VERTEX_POINT('',#183501); +#183501 = CARTESIAN_POINT('',(133.532628,-78.561994,1.51)); +#183502 = LINE('',#183503,#183504); +#183503 = CARTESIAN_POINT('',(133.532628,-78.561994,1.51)); +#183504 = VECTOR('',#183505,1.); +#183505 = DIRECTION('',(0.,0.,1.)); +#183506 = ORIENTED_EDGE('',*,*,#183507,.F.); +#183507 = EDGE_CURVE('',#183468,#183500,#183508,.T.); +#183508 = CIRCLE('',#183509,0.30000227878); +#183509 = AXIS2_PLACEMENT_3D('',#183510,#183511,#183512); +#183510 = CARTESIAN_POINT('',(133.34999926808,-78.80000264175,1.51)); +#183511 = DIRECTION('',(0.,0.,-1.)); +#183512 = DIRECTION('',(-0.382677986812,0.923881788114,0.)); +#183513 = CYLINDRICAL_SURFACE('',#183514,0.30000227878); +#183514 = AXIS2_PLACEMENT_3D('',#183515,#183516,#183517); +#183515 = CARTESIAN_POINT('',(133.34999926808,-78.80000264175,1.51)); +#183516 = DIRECTION('',(0.,0.,-1.)); +#183517 = DIRECTION('',(-0.382677986812,0.923881788114,0.)); +#183518 = ADVANCED_FACE('',(#183519),#183544,.T.); +#183519 = FACE_BOUND('',#183520,.T.); +#183520 = EDGE_LOOP('',(#183521,#183522,#183530,#183538)); +#183521 = ORIENTED_EDGE('',*,*,#183499,.T.); +#183522 = ORIENTED_EDGE('',*,*,#183523,.T.); +#183523 = EDGE_CURVE('',#183491,#183524,#183526,.T.); +#183524 = VERTEX_POINT('',#183525); +#183525 = CARTESIAN_POINT('',(133.548251,-78.577617,1.545)); +#183526 = LINE('',#183527,#183528); +#183527 = CARTESIAN_POINT('',(133.532628,-78.561994,1.545)); +#183528 = VECTOR('',#183529,1.); +#183529 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183530 = ORIENTED_EDGE('',*,*,#183531,.F.); +#183531 = EDGE_CURVE('',#183532,#183524,#183534,.T.); +#183532 = VERTEX_POINT('',#183533); +#183533 = CARTESIAN_POINT('',(133.548251,-78.577617,1.51)); +#183534 = LINE('',#183535,#183536); +#183535 = CARTESIAN_POINT('',(133.548251,-78.577617,1.51)); +#183536 = VECTOR('',#183537,1.); +#183537 = DIRECTION('',(0.,0.,1.)); +#183538 = ORIENTED_EDGE('',*,*,#183539,.F.); +#183539 = EDGE_CURVE('',#183500,#183532,#183540,.T.); +#183540 = LINE('',#183541,#183542); +#183541 = CARTESIAN_POINT('',(133.532628,-78.561994,1.51)); +#183542 = VECTOR('',#183543,1.); +#183543 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183544 = PLANE('',#183545); +#183545 = AXIS2_PLACEMENT_3D('',#183546,#183547,#183548); +#183546 = CARTESIAN_POINT('',(133.532628,-78.561994,1.51)); +#183547 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#183548 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183549 = ADVANCED_FACE('',(#183550),#183575,.T.); +#183550 = FACE_BOUND('',#183551,.T.); +#183551 = EDGE_LOOP('',(#183552,#183553,#183561,#183569)); +#183552 = ORIENTED_EDGE('',*,*,#183531,.T.); +#183553 = ORIENTED_EDGE('',*,*,#183554,.T.); +#183554 = EDGE_CURVE('',#183524,#183555,#183557,.T.); +#183555 = VERTEX_POINT('',#183556); +#183556 = CARTESIAN_POINT('',(133.619509,-78.579538,1.545)); +#183557 = LINE('',#183558,#183559); +#183558 = CARTESIAN_POINT('',(133.548251,-78.577617,1.545)); +#183559 = VECTOR('',#183560,1.); +#183560 = DIRECTION('',(0.99963682091,-2.694858588458E-02,0.)); +#183561 = ORIENTED_EDGE('',*,*,#183562,.F.); +#183562 = EDGE_CURVE('',#183563,#183555,#183565,.T.); +#183563 = VERTEX_POINT('',#183564); +#183564 = CARTESIAN_POINT('',(133.619509,-78.579538,1.51)); +#183565 = LINE('',#183566,#183567); +#183566 = CARTESIAN_POINT('',(133.619509,-78.579538,1.51)); +#183567 = VECTOR('',#183568,1.); +#183568 = DIRECTION('',(0.,0.,1.)); +#183569 = ORIENTED_EDGE('',*,*,#183570,.F.); +#183570 = EDGE_CURVE('',#183532,#183563,#183571,.T.); +#183571 = LINE('',#183572,#183573); +#183572 = CARTESIAN_POINT('',(133.548251,-78.577617,1.51)); +#183573 = VECTOR('',#183574,1.); +#183574 = DIRECTION('',(0.99963682091,-2.694858588458E-02,0.)); +#183575 = PLANE('',#183576); +#183576 = AXIS2_PLACEMENT_3D('',#183577,#183578,#183579); +#183577 = CARTESIAN_POINT('',(133.548251,-78.577617,1.51)); +#183578 = DIRECTION('',(2.694858588458E-02,0.99963682091,-0.)); +#183579 = DIRECTION('',(0.99963682091,-2.694858588458E-02,0.)); +#183580 = ADVANCED_FACE('',(#183581),#183606,.T.); +#183581 = FACE_BOUND('',#183582,.T.); +#183582 = EDGE_LOOP('',(#183583,#183584,#183592,#183600)); +#183583 = ORIENTED_EDGE('',*,*,#183562,.T.); +#183584 = ORIENTED_EDGE('',*,*,#183585,.T.); +#183585 = EDGE_CURVE('',#183555,#183586,#183588,.T.); +#183586 = VERTEX_POINT('',#183587); +#183587 = CARTESIAN_POINT('',(133.655557,-78.59447,1.545)); +#183588 = LINE('',#183589,#183590); +#183589 = CARTESIAN_POINT('',(133.619509,-78.579538,1.545)); +#183590 = VECTOR('',#183591,1.); +#183591 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183592 = ORIENTED_EDGE('',*,*,#183593,.F.); +#183593 = EDGE_CURVE('',#183594,#183586,#183596,.T.); +#183594 = VERTEX_POINT('',#183595); +#183595 = CARTESIAN_POINT('',(133.655557,-78.59447,1.51)); +#183596 = LINE('',#183597,#183598); +#183597 = CARTESIAN_POINT('',(133.655557,-78.59447,1.51)); +#183598 = VECTOR('',#183599,1.); +#183599 = DIRECTION('',(0.,0.,1.)); +#183600 = ORIENTED_EDGE('',*,*,#183601,.F.); +#183601 = EDGE_CURVE('',#183563,#183594,#183602,.T.); +#183602 = LINE('',#183603,#183604); +#183603 = CARTESIAN_POINT('',(133.619509,-78.579538,1.51)); +#183604 = VECTOR('',#183605,1.); +#183605 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183606 = PLANE('',#183607); +#183607 = AXIS2_PLACEMENT_3D('',#183608,#183609,#183610); +#183608 = CARTESIAN_POINT('',(133.619509,-78.579538,1.51)); +#183609 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#183610 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183611 = ADVANCED_FACE('',(#183612),#183637,.T.); +#183612 = FACE_BOUND('',#183613,.T.); +#183613 = EDGE_LOOP('',(#183614,#183615,#183623,#183631)); +#183614 = ORIENTED_EDGE('',*,*,#183593,.T.); +#183615 = ORIENTED_EDGE('',*,*,#183616,.T.); +#183616 = EDGE_CURVE('',#183586,#183617,#183619,.T.); +#183617 = VERTEX_POINT('',#183618); +#183618 = CARTESIAN_POINT('',(134.283147,-79.222061,1.545)); +#183619 = LINE('',#183620,#183621); +#183620 = CARTESIAN_POINT('',(133.655557,-78.59447,1.545)); +#183621 = VECTOR('',#183622,1.); +#183622 = DIRECTION('',(0.707106217836,-0.707107344537,0.)); +#183623 = ORIENTED_EDGE('',*,*,#183624,.F.); +#183624 = EDGE_CURVE('',#183625,#183617,#183627,.T.); +#183625 = VERTEX_POINT('',#183626); +#183626 = CARTESIAN_POINT('',(134.283147,-79.222061,1.51)); +#183627 = LINE('',#183628,#183629); +#183628 = CARTESIAN_POINT('',(134.283147,-79.222061,1.51)); +#183629 = VECTOR('',#183630,1.); +#183630 = DIRECTION('',(0.,0.,1.)); +#183631 = ORIENTED_EDGE('',*,*,#183632,.F.); +#183632 = EDGE_CURVE('',#183594,#183625,#183633,.T.); +#183633 = LINE('',#183634,#183635); +#183634 = CARTESIAN_POINT('',(133.655557,-78.59447,1.51)); +#183635 = VECTOR('',#183636,1.); +#183636 = DIRECTION('',(0.707106217836,-0.707107344537,0.)); +#183637 = PLANE('',#183638); +#183638 = AXIS2_PLACEMENT_3D('',#183639,#183640,#183641); +#183639 = CARTESIAN_POINT('',(133.655557,-78.59447,1.51)); +#183640 = DIRECTION('',(0.707107344537,0.707106217836,-0.)); +#183641 = DIRECTION('',(0.707106217836,-0.707107344537,0.)); +#183642 = ADVANCED_FACE('',(#183643),#183668,.T.); +#183643 = FACE_BOUND('',#183644,.T.); +#183644 = EDGE_LOOP('',(#183645,#183646,#183654,#183662)); +#183645 = ORIENTED_EDGE('',*,*,#183624,.T.); +#183646 = ORIENTED_EDGE('',*,*,#183647,.T.); +#183647 = EDGE_CURVE('',#183617,#183648,#183650,.T.); +#183648 = VERTEX_POINT('',#183649); +#183649 = CARTESIAN_POINT('',(134.298079,-79.258109,1.545)); +#183650 = LINE('',#183651,#183652); +#183651 = CARTESIAN_POINT('',(134.283147,-79.222061,1.545)); +#183652 = VECTOR('',#183653,1.); +#183653 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#183654 = ORIENTED_EDGE('',*,*,#183655,.F.); +#183655 = EDGE_CURVE('',#183656,#183648,#183658,.T.); +#183656 = VERTEX_POINT('',#183657); +#183657 = CARTESIAN_POINT('',(134.298079,-79.258109,1.51)); +#183658 = LINE('',#183659,#183660); +#183659 = CARTESIAN_POINT('',(134.298079,-79.258109,1.51)); +#183660 = VECTOR('',#183661,1.); +#183661 = DIRECTION('',(0.,0.,1.)); +#183662 = ORIENTED_EDGE('',*,*,#183663,.F.); +#183663 = EDGE_CURVE('',#183625,#183656,#183664,.T.); +#183664 = LINE('',#183665,#183666); +#183665 = CARTESIAN_POINT('',(134.283147,-79.222061,1.51)); +#183666 = VECTOR('',#183667,1.); +#183667 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#183668 = PLANE('',#183669); +#183669 = AXIS2_PLACEMENT_3D('',#183670,#183671,#183672); +#183670 = CARTESIAN_POINT('',(134.283147,-79.222061,1.51)); +#183671 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#183672 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#183673 = ADVANCED_FACE('',(#183674),#183699,.T.); +#183674 = FACE_BOUND('',#183675,.T.); +#183675 = EDGE_LOOP('',(#183676,#183677,#183685,#183693)); +#183676 = ORIENTED_EDGE('',*,*,#183655,.T.); +#183677 = ORIENTED_EDGE('',*,*,#183678,.T.); +#183678 = EDGE_CURVE('',#183648,#183679,#183681,.T.); +#183679 = VERTEX_POINT('',#183680); +#183680 = CARTESIAN_POINT('',(134.298079,-81.379509,1.545)); +#183681 = LINE('',#183682,#183683); +#183682 = CARTESIAN_POINT('',(134.298079,-79.258109,1.545)); +#183683 = VECTOR('',#183684,1.); +#183684 = DIRECTION('',(0.,-1.,0.)); +#183685 = ORIENTED_EDGE('',*,*,#183686,.F.); +#183686 = EDGE_CURVE('',#183687,#183679,#183689,.T.); +#183687 = VERTEX_POINT('',#183688); +#183688 = CARTESIAN_POINT('',(134.298079,-81.379509,1.51)); +#183689 = LINE('',#183690,#183691); +#183690 = CARTESIAN_POINT('',(134.298079,-81.379509,1.51)); +#183691 = VECTOR('',#183692,1.); +#183692 = DIRECTION('',(0.,0.,1.)); +#183693 = ORIENTED_EDGE('',*,*,#183694,.F.); +#183694 = EDGE_CURVE('',#183656,#183687,#183695,.T.); +#183695 = LINE('',#183696,#183697); +#183696 = CARTESIAN_POINT('',(134.298079,-79.258109,1.51)); +#183697 = VECTOR('',#183698,1.); +#183698 = DIRECTION('',(0.,-1.,0.)); +#183699 = PLANE('',#183700); +#183700 = AXIS2_PLACEMENT_3D('',#183701,#183702,#183703); +#183701 = CARTESIAN_POINT('',(134.298079,-79.258109,1.51)); +#183702 = DIRECTION('',(1.,0.,-0.)); +#183703 = DIRECTION('',(0.,-1.,0.)); +#183704 = ADVANCED_FACE('',(#183705),#183732,.T.); +#183705 = FACE_BOUND('',#183706,.T.); +#183706 = EDGE_LOOP('',(#183707,#183708,#183717,#183725)); +#183707 = ORIENTED_EDGE('',*,*,#183686,.T.); +#183708 = ORIENTED_EDGE('',*,*,#183709,.T.); +#183709 = EDGE_CURVE('',#183679,#183710,#183712,.T.); +#183710 = VERTEX_POINT('',#183711); +#183711 = CARTESIAN_POINT('',(134.219509,-81.458079,1.545)); +#183712 = CIRCLE('',#183713,0.100002891901); +#183713 = AXIS2_PLACEMENT_3D('',#183714,#183715,#183716); +#183714 = CARTESIAN_POINT('',(134.19999792896,-81.35999792896,1.545)); +#183715 = DIRECTION('',(0.,0.,-1.)); +#183716 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#183717 = ORIENTED_EDGE('',*,*,#183718,.F.); +#183718 = EDGE_CURVE('',#183719,#183710,#183721,.T.); +#183719 = VERTEX_POINT('',#183720); +#183720 = CARTESIAN_POINT('',(134.219509,-81.458079,1.51)); +#183721 = LINE('',#183722,#183723); +#183722 = CARTESIAN_POINT('',(134.219509,-81.458079,1.51)); +#183723 = VECTOR('',#183724,1.); +#183724 = DIRECTION('',(0.,0.,1.)); +#183725 = ORIENTED_EDGE('',*,*,#183726,.F.); +#183726 = EDGE_CURVE('',#183687,#183719,#183727,.T.); +#183727 = CIRCLE('',#183728,0.100002891901); +#183728 = AXIS2_PLACEMENT_3D('',#183729,#183730,#183731); +#183729 = CARTESIAN_POINT('',(134.19999792896,-81.35999792896,1.51)); +#183730 = DIRECTION('',(0.,0.,-1.)); +#183731 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#183732 = CYLINDRICAL_SURFACE('',#183733,0.100002891901); +#183733 = AXIS2_PLACEMENT_3D('',#183734,#183735,#183736); +#183734 = CARTESIAN_POINT('',(134.19999792896,-81.35999792896,1.51)); +#183735 = DIRECTION('',(0.,0.,-1.)); +#183736 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#183737 = ADVANCED_FACE('',(#183738),#183763,.T.); +#183738 = FACE_BOUND('',#183739,.T.); +#183739 = EDGE_LOOP('',(#183740,#183741,#183749,#183757)); +#183740 = ORIENTED_EDGE('',*,*,#183718,.T.); +#183741 = ORIENTED_EDGE('',*,*,#183742,.T.); +#183742 = EDGE_CURVE('',#183710,#183743,#183745,.T.); +#183743 = VERTEX_POINT('',#183744); +#183744 = CARTESIAN_POINT('',(134.175,-81.46,1.545)); +#183745 = LINE('',#183746,#183747); +#183746 = CARTESIAN_POINT('',(134.219509,-81.458079,1.545)); +#183747 = VECTOR('',#183748,1.); +#183748 = DIRECTION('',(-0.999069914584,-4.311966806515E-02,0.)); +#183749 = ORIENTED_EDGE('',*,*,#183750,.F.); +#183750 = EDGE_CURVE('',#183751,#183743,#183753,.T.); +#183751 = VERTEX_POINT('',#183752); +#183752 = CARTESIAN_POINT('',(134.175,-81.46,1.51)); +#183753 = LINE('',#183754,#183755); +#183754 = CARTESIAN_POINT('',(134.175,-81.46,1.51)); +#183755 = VECTOR('',#183756,1.); +#183756 = DIRECTION('',(0.,0.,1.)); +#183757 = ORIENTED_EDGE('',*,*,#183758,.F.); +#183758 = EDGE_CURVE('',#183719,#183751,#183759,.T.); +#183759 = LINE('',#183760,#183761); +#183760 = CARTESIAN_POINT('',(134.219509,-81.458079,1.51)); +#183761 = VECTOR('',#183762,1.); +#183762 = DIRECTION('',(-0.999069914584,-4.311966806515E-02,0.)); +#183763 = PLANE('',#183764); +#183764 = AXIS2_PLACEMENT_3D('',#183765,#183766,#183767); +#183765 = CARTESIAN_POINT('',(134.219509,-81.458079,1.51)); +#183766 = DIRECTION('',(4.311966806515E-02,-0.999069914584,0.)); +#183767 = DIRECTION('',(-0.999069914584,-4.311966806515E-02,0.)); +#183768 = ADVANCED_FACE('',(#183769),#183794,.T.); +#183769 = FACE_BOUND('',#183770,.T.); +#183770 = EDGE_LOOP('',(#183771,#183772,#183780,#183788)); +#183771 = ORIENTED_EDGE('',*,*,#183750,.T.); +#183772 = ORIENTED_EDGE('',*,*,#183773,.T.); +#183773 = EDGE_CURVE('',#183743,#183774,#183776,.T.); +#183774 = VERTEX_POINT('',#183775); +#183775 = CARTESIAN_POINT('',(134.173079,-81.909509,1.545)); +#183776 = LINE('',#183777,#183778); +#183777 = CARTESIAN_POINT('',(134.175,-81.46,1.545)); +#183778 = VECTOR('',#183779,1.); +#183779 = DIRECTION('',(-4.273512784846E-03,-0.999990868503,0.)); +#183780 = ORIENTED_EDGE('',*,*,#183781,.F.); +#183781 = EDGE_CURVE('',#183782,#183774,#183784,.T.); +#183782 = VERTEX_POINT('',#183783); +#183783 = CARTESIAN_POINT('',(134.173079,-81.909509,1.51)); +#183784 = LINE('',#183785,#183786); +#183785 = CARTESIAN_POINT('',(134.173079,-81.909509,1.51)); +#183786 = VECTOR('',#183787,1.); +#183787 = DIRECTION('',(0.,0.,1.)); +#183788 = ORIENTED_EDGE('',*,*,#183789,.F.); +#183789 = EDGE_CURVE('',#183751,#183782,#183790,.T.); +#183790 = LINE('',#183791,#183792); +#183791 = CARTESIAN_POINT('',(134.175,-81.46,1.51)); +#183792 = VECTOR('',#183793,1.); +#183793 = DIRECTION('',(-4.273512784846E-03,-0.999990868503,0.)); +#183794 = PLANE('',#183795); +#183795 = AXIS2_PLACEMENT_3D('',#183796,#183797,#183798); +#183796 = CARTESIAN_POINT('',(134.175,-81.46,1.51)); +#183797 = DIRECTION('',(0.999990868503,-4.273512784846E-03,0.)); +#183798 = DIRECTION('',(-4.273512784846E-03,-0.999990868503,0.)); +#183799 = ADVANCED_FACE('',(#183800),#183825,.T.); +#183800 = FACE_BOUND('',#183801,.T.); +#183801 = EDGE_LOOP('',(#183802,#183803,#183811,#183819)); +#183802 = ORIENTED_EDGE('',*,*,#183781,.T.); +#183803 = ORIENTED_EDGE('',*,*,#183804,.T.); +#183804 = EDGE_CURVE('',#183774,#183805,#183807,.T.); +#183805 = VERTEX_POINT('',#183806); +#183806 = CARTESIAN_POINT('',(134.158147,-81.945557,1.545)); +#183807 = LINE('',#183808,#183809); +#183808 = CARTESIAN_POINT('',(134.173079,-81.909509,1.545)); +#183809 = VECTOR('',#183810,1.); +#183810 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#183811 = ORIENTED_EDGE('',*,*,#183812,.F.); +#183812 = EDGE_CURVE('',#183813,#183805,#183815,.T.); +#183813 = VERTEX_POINT('',#183814); +#183814 = CARTESIAN_POINT('',(134.158147,-81.945557,1.51)); +#183815 = LINE('',#183816,#183817); +#183816 = CARTESIAN_POINT('',(134.158147,-81.945557,1.51)); +#183817 = VECTOR('',#183818,1.); +#183818 = DIRECTION('',(0.,0.,1.)); +#183819 = ORIENTED_EDGE('',*,*,#183820,.F.); +#183820 = EDGE_CURVE('',#183782,#183813,#183821,.T.); +#183821 = LINE('',#183822,#183823); +#183822 = CARTESIAN_POINT('',(134.173079,-81.909509,1.51)); +#183823 = VECTOR('',#183824,1.); +#183824 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#183825 = PLANE('',#183826); +#183826 = AXIS2_PLACEMENT_3D('',#183827,#183828,#183829); +#183827 = CARTESIAN_POINT('',(134.173079,-81.909509,1.51)); +#183828 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#183829 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#183830 = ADVANCED_FACE('',(#183831),#183856,.T.); +#183831 = FACE_BOUND('',#183832,.T.); +#183832 = EDGE_LOOP('',(#183833,#183834,#183842,#183850)); +#183833 = ORIENTED_EDGE('',*,*,#183812,.T.); +#183834 = ORIENTED_EDGE('',*,*,#183835,.T.); +#183835 = EDGE_CURVE('',#183805,#183836,#183838,.T.); +#183836 = VERTEX_POINT('',#183837); +#183837 = CARTESIAN_POINT('',(133.610557,-82.493147,1.545)); +#183838 = LINE('',#183839,#183840); +#183839 = CARTESIAN_POINT('',(134.158147,-81.945557,1.545)); +#183840 = VECTOR('',#183841,1.); +#183841 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#183842 = ORIENTED_EDGE('',*,*,#183843,.F.); +#183843 = EDGE_CURVE('',#183844,#183836,#183846,.T.); +#183844 = VERTEX_POINT('',#183845); +#183845 = CARTESIAN_POINT('',(133.610557,-82.493147,1.51)); +#183846 = LINE('',#183847,#183848); +#183847 = CARTESIAN_POINT('',(133.610557,-82.493147,1.51)); +#183848 = VECTOR('',#183849,1.); +#183849 = DIRECTION('',(0.,0.,1.)); +#183850 = ORIENTED_EDGE('',*,*,#183851,.F.); +#183851 = EDGE_CURVE('',#183813,#183844,#183852,.T.); +#183852 = LINE('',#183853,#183854); +#183853 = CARTESIAN_POINT('',(134.158147,-81.945557,1.51)); +#183854 = VECTOR('',#183855,1.); +#183855 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#183856 = PLANE('',#183857); +#183857 = AXIS2_PLACEMENT_3D('',#183858,#183859,#183860); +#183858 = CARTESIAN_POINT('',(134.158147,-81.945557,1.51)); +#183859 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#183860 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#183861 = ADVANCED_FACE('',(#183862),#183889,.T.); +#183862 = FACE_BOUND('',#183863,.T.); +#183863 = EDGE_LOOP('',(#183864,#183865,#183874,#183882)); +#183864 = ORIENTED_EDGE('',*,*,#183843,.T.); +#183865 = ORIENTED_EDGE('',*,*,#183866,.T.); +#183866 = EDGE_CURVE('',#183836,#183867,#183869,.T.); +#183867 = VERTEX_POINT('',#183868); +#183868 = CARTESIAN_POINT('',(133.471853,-82.354443,1.545)); +#183869 = CIRCLE('',#183870,0.10000001929); +#183870 = AXIS2_PLACEMENT_3D('',#183871,#183872,#183873); +#183871 = CARTESIAN_POINT('',(133.555,-82.41,1.545)); +#183872 = DIRECTION('',(0.,0.,-1.)); +#183873 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#183874 = ORIENTED_EDGE('',*,*,#183875,.F.); +#183875 = EDGE_CURVE('',#183876,#183867,#183878,.T.); +#183876 = VERTEX_POINT('',#183877); +#183877 = CARTESIAN_POINT('',(133.471853,-82.354443,1.51)); +#183878 = LINE('',#183879,#183880); +#183879 = CARTESIAN_POINT('',(133.471853,-82.354443,1.51)); +#183880 = VECTOR('',#183881,1.); +#183881 = DIRECTION('',(0.,0.,1.)); +#183882 = ORIENTED_EDGE('',*,*,#183883,.F.); +#183883 = EDGE_CURVE('',#183844,#183876,#183884,.T.); +#183884 = CIRCLE('',#183885,0.10000001929); +#183885 = AXIS2_PLACEMENT_3D('',#183886,#183887,#183888); +#183886 = CARTESIAN_POINT('',(133.555,-82.41,1.51)); +#183887 = DIRECTION('',(0.,0.,-1.)); +#183888 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#183889 = CYLINDRICAL_SURFACE('',#183890,0.10000001929); +#183890 = AXIS2_PLACEMENT_3D('',#183891,#183892,#183893); +#183891 = CARTESIAN_POINT('',(133.555,-82.41,1.51)); +#183892 = DIRECTION('',(0.,0.,-1.)); +#183893 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#183894 = ADVANCED_FACE('',(#183895),#183920,.T.); +#183895 = FACE_BOUND('',#183896,.T.); +#183896 = EDGE_LOOP('',(#183897,#183898,#183906,#183914)); +#183897 = ORIENTED_EDGE('',*,*,#183875,.T.); +#183898 = ORIENTED_EDGE('',*,*,#183899,.T.); +#183899 = EDGE_CURVE('',#183867,#183900,#183902,.T.); +#183900 = VERTEX_POINT('',#183901); +#183901 = CARTESIAN_POINT('',(133.975,-81.848578,1.545)); +#183902 = LINE('',#183903,#183904); +#183903 = CARTESIAN_POINT('',(133.471853,-82.354443,1.545)); +#183904 = VECTOR('',#183905,1.); +#183905 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#183906 = ORIENTED_EDGE('',*,*,#183907,.F.); +#183907 = EDGE_CURVE('',#183908,#183900,#183910,.T.); +#183908 = VERTEX_POINT('',#183909); +#183909 = CARTESIAN_POINT('',(133.975,-81.848578,1.51)); +#183910 = LINE('',#183911,#183912); +#183911 = CARTESIAN_POINT('',(133.975,-81.848578,1.51)); +#183912 = VECTOR('',#183913,1.); +#183913 = DIRECTION('',(0.,0.,1.)); +#183914 = ORIENTED_EDGE('',*,*,#183915,.F.); +#183915 = EDGE_CURVE('',#183876,#183908,#183916,.T.); +#183916 = LINE('',#183917,#183918); +#183917 = CARTESIAN_POINT('',(133.471853,-82.354443,1.51)); +#183918 = VECTOR('',#183919,1.); +#183919 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#183920 = PLANE('',#183921); +#183921 = AXIS2_PLACEMENT_3D('',#183922,#183923,#183924); +#183922 = CARTESIAN_POINT('',(133.471853,-82.354443,1.51)); +#183923 = DIRECTION('',(-0.709008959472,0.705199472056,0.)); +#183924 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#183925 = ADVANCED_FACE('',(#183926),#183951,.T.); +#183926 = FACE_BOUND('',#183927,.T.); +#183927 = EDGE_LOOP('',(#183928,#183929,#183937,#183945)); +#183928 = ORIENTED_EDGE('',*,*,#183907,.T.); +#183929 = ORIENTED_EDGE('',*,*,#183930,.T.); +#183930 = EDGE_CURVE('',#183900,#183931,#183933,.T.); +#183931 = VERTEX_POINT('',#183932); +#183932 = CARTESIAN_POINT('',(133.976921,-81.340491,1.545)); +#183933 = LINE('',#183934,#183935); +#183934 = CARTESIAN_POINT('',(133.975,-81.848578,1.545)); +#183935 = VECTOR('',#183936,1.); +#183936 = DIRECTION('',(3.780821532507E-03,0.999992852669,0.)); +#183937 = ORIENTED_EDGE('',*,*,#183938,.F.); +#183938 = EDGE_CURVE('',#183939,#183931,#183941,.T.); +#183939 = VERTEX_POINT('',#183940); +#183940 = CARTESIAN_POINT('',(133.976921,-81.340491,1.51)); +#183941 = LINE('',#183942,#183943); +#183942 = CARTESIAN_POINT('',(133.976921,-81.340491,1.51)); +#183943 = VECTOR('',#183944,1.); +#183944 = DIRECTION('',(0.,0.,1.)); +#183945 = ORIENTED_EDGE('',*,*,#183946,.F.); +#183946 = EDGE_CURVE('',#183908,#183939,#183947,.T.); +#183947 = LINE('',#183948,#183949); +#183948 = CARTESIAN_POINT('',(133.975,-81.848578,1.51)); +#183949 = VECTOR('',#183950,1.); +#183950 = DIRECTION('',(3.780821532507E-03,0.999992852669,0.)); +#183951 = PLANE('',#183952); +#183952 = AXIS2_PLACEMENT_3D('',#183953,#183954,#183955); +#183953 = CARTESIAN_POINT('',(133.975,-81.848578,1.51)); +#183954 = DIRECTION('',(-0.999992852669,3.780821532507E-03,0.)); +#183955 = DIRECTION('',(3.780821532507E-03,0.999992852669,0.)); +#183956 = ADVANCED_FACE('',(#183957),#183984,.T.); +#183957 = FACE_BOUND('',#183958,.T.); +#183958 = EDGE_LOOP('',(#183959,#183960,#183969,#183977)); +#183959 = ORIENTED_EDGE('',*,*,#183938,.T.); +#183960 = ORIENTED_EDGE('',*,*,#183961,.T.); +#183961 = EDGE_CURVE('',#183931,#183962,#183964,.T.); +#183962 = VERTEX_POINT('',#183963); +#183963 = CARTESIAN_POINT('',(134.055491,-81.261921,1.545)); +#183964 = CIRCLE('',#183965,0.100002891901); +#183965 = AXIS2_PLACEMENT_3D('',#183966,#183967,#183968); +#183966 = CARTESIAN_POINT('',(134.07500207103,-81.36000207103,1.545)); +#183967 = DIRECTION('',(0.,0.,-1.)); +#183968 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#183969 = ORIENTED_EDGE('',*,*,#183970,.F.); +#183970 = EDGE_CURVE('',#183971,#183962,#183973,.T.); +#183971 = VERTEX_POINT('',#183972); +#183972 = CARTESIAN_POINT('',(134.055491,-81.261921,1.51)); +#183973 = LINE('',#183974,#183975); +#183974 = CARTESIAN_POINT('',(134.055491,-81.261921,1.51)); +#183975 = VECTOR('',#183976,1.); +#183976 = DIRECTION('',(0.,0.,1.)); +#183977 = ORIENTED_EDGE('',*,*,#183978,.F.); +#183978 = EDGE_CURVE('',#183939,#183971,#183979,.T.); +#183979 = CIRCLE('',#183980,0.100002891901); +#183980 = AXIS2_PLACEMENT_3D('',#183981,#183982,#183983); +#183981 = CARTESIAN_POINT('',(134.07500207103,-81.36000207103,1.51)); +#183982 = DIRECTION('',(0.,0.,-1.)); +#183983 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#183984 = CYLINDRICAL_SURFACE('',#183985,0.100002891901); +#183985 = AXIS2_PLACEMENT_3D('',#183986,#183987,#183988); +#183986 = CARTESIAN_POINT('',(134.07500207103,-81.36000207103,1.51)); +#183987 = DIRECTION('',(0.,0.,-1.)); +#183988 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#183989 = ADVANCED_FACE('',(#183990),#184015,.T.); +#183990 = FACE_BOUND('',#183991,.T.); +#183991 = EDGE_LOOP('',(#183992,#183993,#184001,#184009)); +#183992 = ORIENTED_EDGE('',*,*,#183970,.T.); +#183993 = ORIENTED_EDGE('',*,*,#183994,.T.); +#183994 = EDGE_CURVE('',#183962,#183995,#183997,.T.); +#183995 = VERTEX_POINT('',#183996); +#183996 = CARTESIAN_POINT('',(134.1,-81.26,1.545)); +#183997 = LINE('',#183998,#183999); +#183998 = CARTESIAN_POINT('',(134.055491,-81.261921,1.545)); +#183999 = VECTOR('',#184000,1.); +#184000 = DIRECTION('',(0.999069914584,4.311966806512E-02,0.)); +#184001 = ORIENTED_EDGE('',*,*,#184002,.F.); +#184002 = EDGE_CURVE('',#184003,#183995,#184005,.T.); +#184003 = VERTEX_POINT('',#184004); +#184004 = CARTESIAN_POINT('',(134.1,-81.26,1.51)); +#184005 = LINE('',#184006,#184007); +#184006 = CARTESIAN_POINT('',(134.1,-81.26,1.51)); +#184007 = VECTOR('',#184008,1.); +#184008 = DIRECTION('',(0.,0.,1.)); +#184009 = ORIENTED_EDGE('',*,*,#184010,.F.); +#184010 = EDGE_CURVE('',#183971,#184003,#184011,.T.); +#184011 = LINE('',#184012,#184013); +#184012 = CARTESIAN_POINT('',(134.055491,-81.261921,1.51)); +#184013 = VECTOR('',#184014,1.); +#184014 = DIRECTION('',(0.999069914584,4.311966806512E-02,0.)); +#184015 = PLANE('',#184016); +#184016 = AXIS2_PLACEMENT_3D('',#184017,#184018,#184019); +#184017 = CARTESIAN_POINT('',(134.055491,-81.261921,1.51)); +#184018 = DIRECTION('',(-4.311966806512E-02,0.999069914584,0.)); +#184019 = DIRECTION('',(0.999069914584,4.311966806512E-02,0.)); +#184020 = ADVANCED_FACE('',(#184021),#184046,.T.); +#184021 = FACE_BOUND('',#184022,.T.); +#184022 = EDGE_LOOP('',(#184023,#184024,#184032,#184040)); +#184023 = ORIENTED_EDGE('',*,*,#184002,.T.); +#184024 = ORIENTED_EDGE('',*,*,#184025,.T.); +#184025 = EDGE_CURVE('',#183995,#184026,#184028,.T.); +#184026 = VERTEX_POINT('',#184027); +#184027 = CARTESIAN_POINT('',(134.1,-79.319039,1.545)); +#184028 = LINE('',#184029,#184030); +#184029 = CARTESIAN_POINT('',(134.1,-81.26,1.545)); +#184030 = VECTOR('',#184031,1.); +#184031 = DIRECTION('',(0.,1.,0.)); +#184032 = ORIENTED_EDGE('',*,*,#184033,.F.); +#184033 = EDGE_CURVE('',#184034,#184026,#184036,.T.); +#184034 = VERTEX_POINT('',#184035); +#184035 = CARTESIAN_POINT('',(134.1,-79.319039,1.51)); +#184036 = LINE('',#184037,#184038); +#184037 = CARTESIAN_POINT('',(134.1,-79.319039,1.51)); +#184038 = VECTOR('',#184039,1.); +#184039 = DIRECTION('',(0.,0.,1.)); +#184040 = ORIENTED_EDGE('',*,*,#184041,.F.); +#184041 = EDGE_CURVE('',#184003,#184034,#184042,.T.); +#184042 = LINE('',#184043,#184044); +#184043 = CARTESIAN_POINT('',(134.1,-81.26,1.51)); +#184044 = VECTOR('',#184045,1.); +#184045 = DIRECTION('',(0.,1.,0.)); +#184046 = PLANE('',#184047); +#184047 = AXIS2_PLACEMENT_3D('',#184048,#184049,#184050); +#184048 = CARTESIAN_POINT('',(134.1,-81.26,1.51)); +#184049 = DIRECTION('',(-1.,0.,0.)); +#184050 = DIRECTION('',(0.,1.,0.)); +#184051 = ADVANCED_FACE('',(#184052),#184077,.T.); +#184052 = FACE_BOUND('',#184053,.T.); +#184053 = EDGE_LOOP('',(#184054,#184055,#184063,#184071)); +#184054 = ORIENTED_EDGE('',*,*,#184033,.T.); +#184055 = ORIENTED_EDGE('',*,*,#184056,.T.); +#184056 = EDGE_CURVE('',#184026,#184057,#184059,.T.); +#184057 = VERTEX_POINT('',#184058); +#184058 = CARTESIAN_POINT('',(133.64166,-78.8607,1.545)); +#184059 = LINE('',#184060,#184061); +#184060 = CARTESIAN_POINT('',(134.1,-79.319039,1.545)); +#184061 = VECTOR('',#184062,1.); +#184062 = DIRECTION('',(-0.707107552565,0.707106009807,0.)); +#184063 = ORIENTED_EDGE('',*,*,#184064,.F.); +#184064 = EDGE_CURVE('',#184065,#184057,#184067,.T.); +#184065 = VERTEX_POINT('',#184066); +#184066 = CARTESIAN_POINT('',(133.64166,-78.8607,1.51)); +#184067 = LINE('',#184068,#184069); +#184068 = CARTESIAN_POINT('',(133.64166,-78.8607,1.51)); +#184069 = VECTOR('',#184070,1.); +#184070 = DIRECTION('',(0.,0.,1.)); +#184071 = ORIENTED_EDGE('',*,*,#184072,.F.); +#184072 = EDGE_CURVE('',#184034,#184065,#184073,.T.); +#184073 = LINE('',#184074,#184075); +#184074 = CARTESIAN_POINT('',(134.1,-79.319039,1.51)); +#184075 = VECTOR('',#184076,1.); +#184076 = DIRECTION('',(-0.707107552565,0.707106009807,0.)); +#184077 = PLANE('',#184078); +#184078 = AXIS2_PLACEMENT_3D('',#184079,#184080,#184081); +#184079 = CARTESIAN_POINT('',(134.1,-79.319039,1.51)); +#184080 = DIRECTION('',(-0.707106009807,-0.707107552565,0.)); +#184081 = DIRECTION('',(-0.707107552565,0.707106009807,0.)); +#184082 = ADVANCED_FACE('',(#184083),#184108,.T.); +#184083 = FACE_BOUND('',#184084,.T.); +#184084 = EDGE_LOOP('',(#184085,#184086,#184094,#184102)); +#184085 = ORIENTED_EDGE('',*,*,#184064,.T.); +#184086 = ORIENTED_EDGE('',*,*,#184087,.T.); +#184087 = EDGE_CURVE('',#184057,#184088,#184090,.T.); +#184088 = VERTEX_POINT('',#184089); +#184089 = CARTESIAN_POINT('',(133.627164,-78.914805,1.545)); +#184090 = LINE('',#184091,#184092); +#184091 = CARTESIAN_POINT('',(133.64166,-78.8607,1.545)); +#184092 = VECTOR('',#184093,1.); +#184093 = DIRECTION('',(-0.258795874204,-0.965932034615,0.)); +#184094 = ORIENTED_EDGE('',*,*,#184095,.F.); +#184095 = EDGE_CURVE('',#184096,#184088,#184098,.T.); +#184096 = VERTEX_POINT('',#184097); +#184097 = CARTESIAN_POINT('',(133.627164,-78.914805,1.51)); +#184098 = LINE('',#184099,#184100); +#184099 = CARTESIAN_POINT('',(133.627164,-78.914805,1.51)); +#184100 = VECTOR('',#184101,1.); +#184101 = DIRECTION('',(0.,0.,1.)); +#184102 = ORIENTED_EDGE('',*,*,#184103,.F.); +#184103 = EDGE_CURVE('',#184065,#184096,#184104,.T.); +#184104 = LINE('',#184105,#184106); +#184105 = CARTESIAN_POINT('',(133.64166,-78.8607,1.51)); +#184106 = VECTOR('',#184107,1.); +#184107 = DIRECTION('',(-0.258795874204,-0.965932034615,0.)); +#184108 = PLANE('',#184109); +#184109 = AXIS2_PLACEMENT_3D('',#184110,#184111,#184112); +#184110 = CARTESIAN_POINT('',(133.64166,-78.8607,1.51)); +#184111 = DIRECTION('',(0.965932034615,-0.258795874204,0.)); +#184112 = DIRECTION('',(-0.258795874204,-0.965932034615,0.)); +#184113 = ADVANCED_FACE('',(#184114),#184141,.T.); +#184114 = FACE_BOUND('',#184115,.T.); +#184115 = EDGE_LOOP('',(#184116,#184117,#184126,#184134)); +#184116 = ORIENTED_EDGE('',*,*,#184095,.T.); +#184117 = ORIENTED_EDGE('',*,*,#184118,.T.); +#184118 = EDGE_CURVE('',#184088,#184119,#184121,.T.); +#184119 = VERTEX_POINT('',#184120); +#184120 = CARTESIAN_POINT('',(133.072836,-78.685195,1.545)); +#184121 = CIRCLE('',#184122,0.300000118202); +#184122 = AXIS2_PLACEMENT_3D('',#184123,#184124,#184125); +#184123 = CARTESIAN_POINT('',(133.35,-78.8,1.545)); +#184124 = DIRECTION('',(-0.,0.,-1.)); +#184125 = DIRECTION('',(0.923879635986,-0.382683182554,-0.)); +#184126 = ORIENTED_EDGE('',*,*,#184127,.F.); +#184127 = EDGE_CURVE('',#184128,#184119,#184130,.T.); +#184128 = VERTEX_POINT('',#184129); +#184129 = CARTESIAN_POINT('',(133.072836,-78.685195,1.51)); +#184130 = LINE('',#184131,#184132); +#184131 = CARTESIAN_POINT('',(133.072836,-78.685195,1.51)); +#184132 = VECTOR('',#184133,1.); +#184133 = DIRECTION('',(0.,0.,1.)); +#184134 = ORIENTED_EDGE('',*,*,#184135,.F.); +#184135 = EDGE_CURVE('',#184096,#184128,#184136,.T.); +#184136 = CIRCLE('',#184137,0.300000118202); +#184137 = AXIS2_PLACEMENT_3D('',#184138,#184139,#184140); +#184138 = CARTESIAN_POINT('',(133.35,-78.8,1.51)); +#184139 = DIRECTION('',(-0.,0.,-1.)); +#184140 = DIRECTION('',(0.923879635986,-0.382683182554,-0.)); +#184141 = CYLINDRICAL_SURFACE('',#184142,0.300000118202); +#184142 = AXIS2_PLACEMENT_3D('',#184143,#184144,#184145); +#184143 = CARTESIAN_POINT('',(133.35,-78.8,1.51)); +#184144 = DIRECTION('',(-0.,0.,-1.)); +#184145 = DIRECTION('',(0.923879635986,-0.382683182554,-0.)); +#184146 = ADVANCED_FACE('',(#184147),#184172,.T.); +#184147 = FACE_BOUND('',#184148,.T.); +#184148 = EDGE_LOOP('',(#184149,#184150,#184158,#184166)); +#184149 = ORIENTED_EDGE('',*,*,#184127,.T.); +#184150 = ORIENTED_EDGE('',*,*,#184151,.T.); +#184151 = EDGE_CURVE('',#184119,#184152,#184154,.T.); +#184152 = VERTEX_POINT('',#184153); +#184153 = CARTESIAN_POINT('',(133.080499,-78.67192,1.545)); +#184154 = LINE('',#184155,#184156); +#184155 = CARTESIAN_POINT('',(133.072836,-78.685195,1.545)); +#184156 = VECTOR('',#184157,1.); +#184157 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#184158 = ORIENTED_EDGE('',*,*,#184159,.F.); +#184159 = EDGE_CURVE('',#184160,#184152,#184162,.T.); +#184160 = VERTEX_POINT('',#184161); +#184161 = CARTESIAN_POINT('',(133.080499,-78.67192,1.51)); +#184162 = LINE('',#184163,#184164); +#184163 = CARTESIAN_POINT('',(133.080499,-78.67192,1.51)); +#184164 = VECTOR('',#184165,1.); +#184165 = DIRECTION('',(0.,0.,1.)); +#184166 = ORIENTED_EDGE('',*,*,#184167,.F.); +#184167 = EDGE_CURVE('',#184128,#184160,#184168,.T.); +#184168 = LINE('',#184169,#184170); +#184169 = CARTESIAN_POINT('',(133.072836,-78.685195,1.51)); +#184170 = VECTOR('',#184171,1.); +#184171 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#184172 = PLANE('',#184173); +#184173 = AXIS2_PLACEMENT_3D('',#184174,#184175,#184176); +#184174 = CARTESIAN_POINT('',(133.072836,-78.685195,1.51)); +#184175 = DIRECTION('',(-0.866062827368,0.49993517485,0.)); +#184176 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#184177 = ADVANCED_FACE('',(#184178),#184203,.T.); +#184178 = FACE_BOUND('',#184179,.T.); +#184179 = EDGE_LOOP('',(#184180,#184181,#184189,#184197)); +#184180 = ORIENTED_EDGE('',*,*,#184159,.T.); +#184181 = ORIENTED_EDGE('',*,*,#184182,.T.); +#184182 = EDGE_CURVE('',#184152,#184183,#184185,.T.); +#184183 = VERTEX_POINT('',#184184); +#184184 = CARTESIAN_POINT('',(131.708578,-77.3,1.545)); +#184185 = LINE('',#184186,#184187); +#184186 = CARTESIAN_POINT('',(133.080499,-78.67192,1.545)); +#184187 = VECTOR('',#184188,1.); +#184188 = DIRECTION('',(-0.707107038893,0.70710652348,0.)); +#184189 = ORIENTED_EDGE('',*,*,#184190,.F.); +#184190 = EDGE_CURVE('',#184191,#184183,#184193,.T.); +#184191 = VERTEX_POINT('',#184192); +#184192 = CARTESIAN_POINT('',(131.708578,-77.3,1.51)); +#184193 = LINE('',#184194,#184195); +#184194 = CARTESIAN_POINT('',(131.708578,-77.3,1.51)); +#184195 = VECTOR('',#184196,1.); +#184196 = DIRECTION('',(0.,0.,1.)); +#184197 = ORIENTED_EDGE('',*,*,#184198,.F.); +#184198 = EDGE_CURVE('',#184160,#184191,#184199,.T.); +#184199 = LINE('',#184200,#184201); +#184200 = CARTESIAN_POINT('',(133.080499,-78.67192,1.51)); +#184201 = VECTOR('',#184202,1.); +#184202 = DIRECTION('',(-0.707107038893,0.70710652348,0.)); +#184203 = PLANE('',#184204); +#184204 = AXIS2_PLACEMENT_3D('',#184205,#184206,#184207); +#184205 = CARTESIAN_POINT('',(133.080499,-78.67192,1.51)); +#184206 = DIRECTION('',(-0.70710652348,-0.707107038893,0.)); +#184207 = DIRECTION('',(-0.707107038893,0.70710652348,0.)); +#184208 = ADVANCED_FACE('',(#184209),#184234,.T.); +#184209 = FACE_BOUND('',#184210,.T.); +#184210 = EDGE_LOOP('',(#184211,#184212,#184220,#184228)); +#184211 = ORIENTED_EDGE('',*,*,#184190,.T.); +#184212 = ORIENTED_EDGE('',*,*,#184213,.T.); +#184213 = EDGE_CURVE('',#184183,#184214,#184216,.T.); +#184214 = VERTEX_POINT('',#184215); +#184215 = CARTESIAN_POINT('',(131.231131,-77.3,1.545)); +#184216 = LINE('',#184217,#184218); +#184217 = CARTESIAN_POINT('',(131.708578,-77.3,1.545)); +#184218 = VECTOR('',#184219,1.); +#184219 = DIRECTION('',(-1.,0.,0.)); +#184220 = ORIENTED_EDGE('',*,*,#184221,.F.); +#184221 = EDGE_CURVE('',#184222,#184214,#184224,.T.); +#184222 = VERTEX_POINT('',#184223); +#184223 = CARTESIAN_POINT('',(131.231131,-77.3,1.51)); +#184224 = LINE('',#184225,#184226); +#184225 = CARTESIAN_POINT('',(131.231131,-77.3,1.51)); +#184226 = VECTOR('',#184227,1.); +#184227 = DIRECTION('',(0.,0.,1.)); +#184228 = ORIENTED_EDGE('',*,*,#184229,.F.); +#184229 = EDGE_CURVE('',#184191,#184222,#184230,.T.); +#184230 = LINE('',#184231,#184232); +#184231 = CARTESIAN_POINT('',(131.708578,-77.3,1.51)); +#184232 = VECTOR('',#184233,1.); +#184233 = DIRECTION('',(-1.,0.,0.)); +#184234 = PLANE('',#184235); +#184235 = AXIS2_PLACEMENT_3D('',#184236,#184237,#184238); +#184236 = CARTESIAN_POINT('',(131.708578,-77.3,1.51)); +#184237 = DIRECTION('',(0.,-1.,0.)); +#184238 = DIRECTION('',(-1.,0.,0.)); +#184239 = ADVANCED_FACE('',(#184240),#184265,.T.); +#184240 = FACE_BOUND('',#184241,.T.); +#184241 = EDGE_LOOP('',(#184242,#184243,#184251,#184259)); +#184242 = ORIENTED_EDGE('',*,*,#184221,.T.); +#184243 = ORIENTED_EDGE('',*,*,#184244,.T.); +#184244 = EDGE_CURVE('',#184214,#184245,#184247,.T.); +#184245 = VERTEX_POINT('',#184246); +#184246 = CARTESIAN_POINT('',(131.227164,-77.314805,1.545)); +#184247 = LINE('',#184248,#184249); +#184248 = CARTESIAN_POINT('',(131.231131,-77.3,1.545)); +#184249 = VECTOR('',#184250,1.); +#184250 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#184251 = ORIENTED_EDGE('',*,*,#184252,.F.); +#184252 = EDGE_CURVE('',#184253,#184245,#184255,.T.); +#184253 = VERTEX_POINT('',#184254); +#184254 = CARTESIAN_POINT('',(131.227164,-77.314805,1.51)); +#184255 = LINE('',#184256,#184257); +#184256 = CARTESIAN_POINT('',(131.227164,-77.314805,1.51)); +#184257 = VECTOR('',#184258,1.); +#184258 = DIRECTION('',(0.,0.,1.)); +#184259 = ORIENTED_EDGE('',*,*,#184260,.F.); +#184260 = EDGE_CURVE('',#184222,#184253,#184261,.T.); +#184261 = LINE('',#184262,#184263); +#184262 = CARTESIAN_POINT('',(131.231131,-77.3,1.51)); +#184263 = VECTOR('',#184264,1.); +#184264 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#184265 = PLANE('',#184266); +#184266 = AXIS2_PLACEMENT_3D('',#184267,#184268,#184269); +#184267 = CARTESIAN_POINT('',(131.231131,-77.3,1.51)); +#184268 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#184269 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#184270 = ADVANCED_FACE('',(#184271),#184298,.T.); +#184271 = FACE_BOUND('',#184272,.T.); +#184272 = EDGE_LOOP('',(#184273,#184274,#184283,#184291)); +#184273 = ORIENTED_EDGE('',*,*,#184252,.T.); +#184274 = ORIENTED_EDGE('',*,*,#184275,.T.); +#184275 = EDGE_CURVE('',#184245,#184276,#184278,.T.); +#184276 = VERTEX_POINT('',#184277); +#184277 = CARTESIAN_POINT('',(131.227164,-77.085195,1.545)); +#184278 = CIRCLE('',#184279,0.299999888633); +#184279 = AXIS2_PLACEMENT_3D('',#184280,#184281,#184282); +#184280 = CARTESIAN_POINT('',(130.95000024848,-77.2,1.545)); +#184281 = DIRECTION('',(-0.,0.,-1.)); +#184282 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#184283 = ORIENTED_EDGE('',*,*,#184284,.F.); +#184284 = EDGE_CURVE('',#184285,#184276,#184287,.T.); +#184285 = VERTEX_POINT('',#184286); +#184286 = CARTESIAN_POINT('',(131.227164,-77.085195,1.51)); +#184287 = LINE('',#184288,#184289); +#184288 = CARTESIAN_POINT('',(131.227164,-77.085195,1.51)); +#184289 = VECTOR('',#184290,1.); +#184290 = DIRECTION('',(0.,0.,1.)); +#184291 = ORIENTED_EDGE('',*,*,#184292,.F.); +#184292 = EDGE_CURVE('',#184253,#184285,#184293,.T.); +#184293 = CIRCLE('',#184294,0.299999888633); +#184294 = AXIS2_PLACEMENT_3D('',#184295,#184296,#184297); +#184295 = CARTESIAN_POINT('',(130.95000024848,-77.2,1.51)); +#184296 = DIRECTION('',(-0.,0.,-1.)); +#184297 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#184298 = CYLINDRICAL_SURFACE('',#184299,0.299999888633); +#184299 = AXIS2_PLACEMENT_3D('',#184300,#184301,#184302); +#184300 = CARTESIAN_POINT('',(130.95000024848,-77.2,1.51)); +#184301 = DIRECTION('',(-0.,0.,-1.)); +#184302 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#184303 = ADVANCED_FACE('',(#184304),#184320,.T.); +#184304 = FACE_BOUND('',#184305,.T.); +#184305 = EDGE_LOOP('',(#184306,#184307,#184313,#184314)); +#184306 = ORIENTED_EDGE('',*,*,#184284,.T.); +#184307 = ORIENTED_EDGE('',*,*,#184308,.T.); +#184308 = EDGE_CURVE('',#184276,#183359,#184309,.T.); +#184309 = LINE('',#184310,#184311); +#184310 = CARTESIAN_POINT('',(131.227164,-77.085195,1.545)); +#184311 = VECTOR('',#184312,1.); +#184312 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#184313 = ORIENTED_EDGE('',*,*,#183356,.F.); +#184314 = ORIENTED_EDGE('',*,*,#184315,.F.); +#184315 = EDGE_CURVE('',#184285,#183357,#184316,.T.); +#184316 = LINE('',#184317,#184318); +#184317 = CARTESIAN_POINT('',(131.227164,-77.085195,1.51)); +#184318 = VECTOR('',#184319,1.); +#184319 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#184320 = PLANE('',#184321); +#184321 = AXIS2_PLACEMENT_3D('',#184322,#184323,#184324); +#184322 = CARTESIAN_POINT('',(131.227164,-77.085195,1.51)); +#184323 = DIRECTION('',(0.965925627198,0.25881978812,-0.)); +#184324 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#184325 = ADVANCED_FACE('',(#184326),#184353,.F.); +#184326 = FACE_BOUND('',#184327,.T.); +#184327 = EDGE_LOOP('',(#184328,#184338,#184345,#184346)); +#184328 = ORIENTED_EDGE('',*,*,#184329,.T.); +#184329 = EDGE_CURVE('',#184330,#184332,#184334,.T.); +#184330 = VERTEX_POINT('',#184331); +#184331 = CARTESIAN_POINT('',(133.487255,-78.8,1.51)); +#184332 = VERTEX_POINT('',#184333); +#184333 = CARTESIAN_POINT('',(133.487255,-78.8,1.545)); +#184334 = LINE('',#184335,#184336); +#184335 = CARTESIAN_POINT('',(133.487255,-78.8,1.51)); +#184336 = VECTOR('',#184337,1.); +#184337 = DIRECTION('',(0.,0.,1.)); +#184338 = ORIENTED_EDGE('',*,*,#184339,.T.); +#184339 = EDGE_CURVE('',#184332,#184332,#184340,.T.); +#184340 = CIRCLE('',#184341,0.137255); +#184341 = AXIS2_PLACEMENT_3D('',#184342,#184343,#184344); +#184342 = CARTESIAN_POINT('',(133.35,-78.8,1.545)); +#184343 = DIRECTION('',(0.,0.,1.)); +#184344 = DIRECTION('',(1.,0.,-0.)); +#184345 = ORIENTED_EDGE('',*,*,#184329,.F.); +#184346 = ORIENTED_EDGE('',*,*,#184347,.F.); +#184347 = EDGE_CURVE('',#184330,#184330,#184348,.T.); +#184348 = CIRCLE('',#184349,0.137255); +#184349 = AXIS2_PLACEMENT_3D('',#184350,#184351,#184352); +#184350 = CARTESIAN_POINT('',(133.35,-78.8,1.51)); +#184351 = DIRECTION('',(0.,0.,1.)); +#184352 = DIRECTION('',(1.,0.,-0.)); +#184353 = CYLINDRICAL_SURFACE('',#184354,0.137255); +#184354 = AXIS2_PLACEMENT_3D('',#184355,#184356,#184357); +#184355 = CARTESIAN_POINT('',(133.35,-78.8,1.51)); +#184356 = DIRECTION('',(-0.,-0.,-1.)); +#184357 = DIRECTION('',(1.,0.,-0.)); +#184358 = ADVANCED_FACE('',(#184359),#184386,.F.); +#184359 = FACE_BOUND('',#184360,.T.); +#184360 = EDGE_LOOP('',(#184361,#184371,#184378,#184379)); +#184361 = ORIENTED_EDGE('',*,*,#184362,.T.); +#184362 = EDGE_CURVE('',#184363,#184365,#184367,.T.); +#184363 = VERTEX_POINT('',#184364); +#184364 = CARTESIAN_POINT('',(131.087255,-77.2,1.51)); +#184365 = VERTEX_POINT('',#184366); +#184366 = CARTESIAN_POINT('',(131.087255,-77.2,1.545)); +#184367 = LINE('',#184368,#184369); +#184368 = CARTESIAN_POINT('',(131.087255,-77.2,1.51)); +#184369 = VECTOR('',#184370,1.); +#184370 = DIRECTION('',(0.,0.,1.)); +#184371 = ORIENTED_EDGE('',*,*,#184372,.T.); +#184372 = EDGE_CURVE('',#184365,#184365,#184373,.T.); +#184373 = CIRCLE('',#184374,0.137255); +#184374 = AXIS2_PLACEMENT_3D('',#184375,#184376,#184377); +#184375 = CARTESIAN_POINT('',(130.95,-77.2,1.545)); +#184376 = DIRECTION('',(0.,0.,1.)); +#184377 = DIRECTION('',(1.,0.,-0.)); +#184378 = ORIENTED_EDGE('',*,*,#184362,.F.); +#184379 = ORIENTED_EDGE('',*,*,#184380,.F.); +#184380 = EDGE_CURVE('',#184363,#184363,#184381,.T.); +#184381 = CIRCLE('',#184382,0.137255); +#184382 = AXIS2_PLACEMENT_3D('',#184383,#184384,#184385); +#184383 = CARTESIAN_POINT('',(130.95,-77.2,1.51)); +#184384 = DIRECTION('',(0.,0.,1.)); +#184385 = DIRECTION('',(1.,0.,-0.)); +#184386 = CYLINDRICAL_SURFACE('',#184387,0.137255); +#184387 = AXIS2_PLACEMENT_3D('',#184388,#184389,#184390); +#184388 = CARTESIAN_POINT('',(130.95,-77.2,1.51)); +#184389 = DIRECTION('',(-0.,-0.,-1.)); +#184390 = DIRECTION('',(1.,0.,-0.)); +#184391 = ADVANCED_FACE('',(#184392,#184425,#184428),#184431,.F.); +#184392 = FACE_BOUND('',#184393,.T.); +#184393 = EDGE_LOOP('',(#184394,#184395,#184396,#184397,#184398,#184399, + #184400,#184401,#184402,#184403,#184404,#184405,#184406,#184407, + #184408,#184409,#184410,#184411,#184412,#184413,#184414,#184415, + #184416,#184417,#184418,#184419,#184420,#184421,#184422,#184423, + #184424)); +#184394 = ORIENTED_EDGE('',*,*,#183382,.T.); +#184395 = ORIENTED_EDGE('',*,*,#183413,.T.); +#184396 = ORIENTED_EDGE('',*,*,#183444,.T.); +#184397 = ORIENTED_EDGE('',*,*,#183475,.T.); +#184398 = ORIENTED_EDGE('',*,*,#183507,.T.); +#184399 = ORIENTED_EDGE('',*,*,#183539,.T.); +#184400 = ORIENTED_EDGE('',*,*,#183570,.T.); +#184401 = ORIENTED_EDGE('',*,*,#183601,.T.); +#184402 = ORIENTED_EDGE('',*,*,#183632,.T.); +#184403 = ORIENTED_EDGE('',*,*,#183663,.T.); +#184404 = ORIENTED_EDGE('',*,*,#183694,.T.); +#184405 = ORIENTED_EDGE('',*,*,#183726,.T.); +#184406 = ORIENTED_EDGE('',*,*,#183758,.T.); +#184407 = ORIENTED_EDGE('',*,*,#183789,.T.); +#184408 = ORIENTED_EDGE('',*,*,#183820,.T.); +#184409 = ORIENTED_EDGE('',*,*,#183851,.T.); +#184410 = ORIENTED_EDGE('',*,*,#183883,.T.); +#184411 = ORIENTED_EDGE('',*,*,#183915,.T.); +#184412 = ORIENTED_EDGE('',*,*,#183946,.T.); +#184413 = ORIENTED_EDGE('',*,*,#183978,.T.); +#184414 = ORIENTED_EDGE('',*,*,#184010,.T.); +#184415 = ORIENTED_EDGE('',*,*,#184041,.T.); +#184416 = ORIENTED_EDGE('',*,*,#184072,.T.); +#184417 = ORIENTED_EDGE('',*,*,#184103,.T.); +#184418 = ORIENTED_EDGE('',*,*,#184135,.T.); +#184419 = ORIENTED_EDGE('',*,*,#184167,.T.); +#184420 = ORIENTED_EDGE('',*,*,#184198,.T.); +#184421 = ORIENTED_EDGE('',*,*,#184229,.T.); +#184422 = ORIENTED_EDGE('',*,*,#184260,.T.); +#184423 = ORIENTED_EDGE('',*,*,#184292,.T.); +#184424 = ORIENTED_EDGE('',*,*,#184315,.T.); +#184425 = FACE_BOUND('',#184426,.T.); +#184426 = EDGE_LOOP('',(#184427)); +#184427 = ORIENTED_EDGE('',*,*,#184347,.T.); +#184428 = FACE_BOUND('',#184429,.T.); +#184429 = EDGE_LOOP('',(#184430)); +#184430 = ORIENTED_EDGE('',*,*,#184380,.T.); +#184431 = PLANE('',#184432); +#184432 = AXIS2_PLACEMENT_3D('',#184433,#184434,#184435); +#184433 = CARTESIAN_POINT('',(0.,0.,1.51)); +#184434 = DIRECTION('',(0.,0.,1.)); +#184435 = DIRECTION('',(1.,0.,-0.)); +#184436 = ADVANCED_FACE('',(#184437,#184470,#184473),#184476,.T.); +#184437 = FACE_BOUND('',#184438,.F.); +#184438 = EDGE_LOOP('',(#184439,#184440,#184441,#184442,#184443,#184444, + #184445,#184446,#184447,#184448,#184449,#184450,#184451,#184452, + #184453,#184454,#184455,#184456,#184457,#184458,#184459,#184460, + #184461,#184462,#184463,#184464,#184465,#184466,#184467,#184468, + #184469)); +#184439 = ORIENTED_EDGE('',*,*,#183366,.T.); +#184440 = ORIENTED_EDGE('',*,*,#183397,.T.); +#184441 = ORIENTED_EDGE('',*,*,#183428,.T.); +#184442 = ORIENTED_EDGE('',*,*,#183459,.T.); +#184443 = ORIENTED_EDGE('',*,*,#183490,.T.); +#184444 = ORIENTED_EDGE('',*,*,#183523,.T.); +#184445 = ORIENTED_EDGE('',*,*,#183554,.T.); +#184446 = ORIENTED_EDGE('',*,*,#183585,.T.); +#184447 = ORIENTED_EDGE('',*,*,#183616,.T.); +#184448 = ORIENTED_EDGE('',*,*,#183647,.T.); +#184449 = ORIENTED_EDGE('',*,*,#183678,.T.); +#184450 = ORIENTED_EDGE('',*,*,#183709,.T.); +#184451 = ORIENTED_EDGE('',*,*,#183742,.T.); +#184452 = ORIENTED_EDGE('',*,*,#183773,.T.); +#184453 = ORIENTED_EDGE('',*,*,#183804,.T.); +#184454 = ORIENTED_EDGE('',*,*,#183835,.T.); +#184455 = ORIENTED_EDGE('',*,*,#183866,.T.); +#184456 = ORIENTED_EDGE('',*,*,#183899,.T.); +#184457 = ORIENTED_EDGE('',*,*,#183930,.T.); +#184458 = ORIENTED_EDGE('',*,*,#183961,.T.); +#184459 = ORIENTED_EDGE('',*,*,#183994,.T.); +#184460 = ORIENTED_EDGE('',*,*,#184025,.T.); +#184461 = ORIENTED_EDGE('',*,*,#184056,.T.); +#184462 = ORIENTED_EDGE('',*,*,#184087,.T.); +#184463 = ORIENTED_EDGE('',*,*,#184118,.T.); +#184464 = ORIENTED_EDGE('',*,*,#184151,.T.); +#184465 = ORIENTED_EDGE('',*,*,#184182,.T.); +#184466 = ORIENTED_EDGE('',*,*,#184213,.T.); +#184467 = ORIENTED_EDGE('',*,*,#184244,.T.); +#184468 = ORIENTED_EDGE('',*,*,#184275,.T.); +#184469 = ORIENTED_EDGE('',*,*,#184308,.T.); +#184470 = FACE_BOUND('',#184471,.F.); +#184471 = EDGE_LOOP('',(#184472)); +#184472 = ORIENTED_EDGE('',*,*,#184339,.T.); +#184473 = FACE_BOUND('',#184474,.F.); +#184474 = EDGE_LOOP('',(#184475)); +#184475 = ORIENTED_EDGE('',*,*,#184372,.T.); +#184476 = PLANE('',#184477); +#184477 = AXIS2_PLACEMENT_3D('',#184478,#184479,#184480); +#184478 = CARTESIAN_POINT('',(0.,0.,1.545)); +#184479 = DIRECTION('',(0.,0.,1.)); +#184480 = DIRECTION('',(1.,0.,-0.)); +#184481 = MANIFOLD_SOLID_BREP('',#184482); +#184482 = CLOSED_SHELL('',(#184483,#184523,#184554,#184585,#184616, + #184647,#184678,#184711,#184742,#184773,#184804,#184835,#184868, + #184899,#184930,#184961,#184992,#185023,#185056,#185087,#185118, + #185149,#185180,#185211,#185242,#185273,#185295,#185328,#185365)); +#184483 = ADVANCED_FACE('',(#184484),#184518,.F.); +#184484 = FACE_BOUND('',#184485,.F.); +#184485 = EDGE_LOOP('',(#184486,#184496,#184504,#184512)); +#184486 = ORIENTED_EDGE('',*,*,#184487,.T.); +#184487 = EDGE_CURVE('',#184488,#184490,#184492,.T.); +#184488 = VERTEX_POINT('',#184489); +#184489 = CARTESIAN_POINT('',(136.544443,-74.716852,0.)); +#184490 = VERTEX_POINT('',#184491); +#184491 = CARTESIAN_POINT('',(136.544443,-74.716852,-3.5E-02)); +#184492 = LINE('',#184493,#184494); +#184493 = CARTESIAN_POINT('',(136.544443,-74.716852,0.)); +#184494 = VECTOR('',#184495,1.); +#184495 = DIRECTION('',(0.,0.,-1.)); +#184496 = ORIENTED_EDGE('',*,*,#184497,.T.); +#184497 = EDGE_CURVE('',#184490,#184498,#184500,.T.); +#184498 = VERTEX_POINT('',#184499); +#184499 = CARTESIAN_POINT('',(136.580491,-74.701921,-3.5E-02)); +#184500 = LINE('',#184501,#184502); +#184501 = CARTESIAN_POINT('',(136.544443,-74.716852,-3.5E-02)); +#184502 = VECTOR('',#184503,1.); +#184503 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#184504 = ORIENTED_EDGE('',*,*,#184505,.F.); +#184505 = EDGE_CURVE('',#184506,#184498,#184508,.T.); +#184506 = VERTEX_POINT('',#184507); +#184507 = CARTESIAN_POINT('',(136.580491,-74.701921,0.)); +#184508 = LINE('',#184509,#184510); +#184509 = CARTESIAN_POINT('',(136.580491,-74.701921,0.)); +#184510 = VECTOR('',#184511,1.); +#184511 = DIRECTION('',(0.,0.,-1.)); +#184512 = ORIENTED_EDGE('',*,*,#184513,.F.); +#184513 = EDGE_CURVE('',#184488,#184506,#184514,.T.); +#184514 = LINE('',#184515,#184516); +#184515 = CARTESIAN_POINT('',(136.544443,-74.716852,0.)); +#184516 = VECTOR('',#184517,1.); +#184517 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#184518 = PLANE('',#184519); +#184519 = AXIS2_PLACEMENT_3D('',#184520,#184521,#184522); +#184520 = CARTESIAN_POINT('',(136.544443,-74.716852,0.)); +#184521 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#184522 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#184523 = ADVANCED_FACE('',(#184524),#184549,.F.); +#184524 = FACE_BOUND('',#184525,.F.); +#184525 = EDGE_LOOP('',(#184526,#184527,#184535,#184543)); +#184526 = ORIENTED_EDGE('',*,*,#184505,.T.); +#184527 = ORIENTED_EDGE('',*,*,#184528,.T.); +#184528 = EDGE_CURVE('',#184498,#184529,#184531,.T.); +#184529 = VERTEX_POINT('',#184530); +#184530 = CARTESIAN_POINT('',(140.419509,-74.701921,-3.5E-02)); +#184531 = LINE('',#184532,#184533); +#184532 = CARTESIAN_POINT('',(136.580491,-74.701921,-3.5E-02)); +#184533 = VECTOR('',#184534,1.); +#184534 = DIRECTION('',(1.,0.,0.)); +#184535 = ORIENTED_EDGE('',*,*,#184536,.F.); +#184536 = EDGE_CURVE('',#184537,#184529,#184539,.T.); +#184537 = VERTEX_POINT('',#184538); +#184538 = CARTESIAN_POINT('',(140.419509,-74.701921,0.)); +#184539 = LINE('',#184540,#184541); +#184540 = CARTESIAN_POINT('',(140.419509,-74.701921,0.)); +#184541 = VECTOR('',#184542,1.); +#184542 = DIRECTION('',(0.,0.,-1.)); +#184543 = ORIENTED_EDGE('',*,*,#184544,.F.); +#184544 = EDGE_CURVE('',#184506,#184537,#184545,.T.); +#184545 = LINE('',#184546,#184547); +#184546 = CARTESIAN_POINT('',(136.580491,-74.701921,0.)); +#184547 = VECTOR('',#184548,1.); +#184548 = DIRECTION('',(1.,0.,0.)); +#184549 = PLANE('',#184550); +#184550 = AXIS2_PLACEMENT_3D('',#184551,#184552,#184553); +#184551 = CARTESIAN_POINT('',(136.580491,-74.701921,0.)); +#184552 = DIRECTION('',(0.,-1.,0.)); +#184553 = DIRECTION('',(1.,0.,0.)); +#184554 = ADVANCED_FACE('',(#184555),#184580,.F.); +#184555 = FACE_BOUND('',#184556,.F.); +#184556 = EDGE_LOOP('',(#184557,#184558,#184566,#184574)); +#184557 = ORIENTED_EDGE('',*,*,#184536,.T.); +#184558 = ORIENTED_EDGE('',*,*,#184559,.T.); +#184559 = EDGE_CURVE('',#184529,#184560,#184562,.T.); +#184560 = VERTEX_POINT('',#184561); +#184561 = CARTESIAN_POINT('',(140.455557,-74.716853,-3.5E-02)); +#184562 = LINE('',#184563,#184564); +#184563 = CARTESIAN_POINT('',(140.419509,-74.701921,-3.5E-02)); +#184564 = VECTOR('',#184565,1.); +#184565 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#184566 = ORIENTED_EDGE('',*,*,#184567,.F.); +#184567 = EDGE_CURVE('',#184568,#184560,#184570,.T.); +#184568 = VERTEX_POINT('',#184569); +#184569 = CARTESIAN_POINT('',(140.455557,-74.716853,0.)); +#184570 = LINE('',#184571,#184572); +#184571 = CARTESIAN_POINT('',(140.455557,-74.716853,0.)); +#184572 = VECTOR('',#184573,1.); +#184573 = DIRECTION('',(0.,0.,-1.)); +#184574 = ORIENTED_EDGE('',*,*,#184575,.F.); +#184575 = EDGE_CURVE('',#184537,#184568,#184576,.T.); +#184576 = LINE('',#184577,#184578); +#184577 = CARTESIAN_POINT('',(140.419509,-74.701921,0.)); +#184578 = VECTOR('',#184579,1.); +#184579 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#184580 = PLANE('',#184581); +#184581 = AXIS2_PLACEMENT_3D('',#184582,#184583,#184584); +#184582 = CARTESIAN_POINT('',(140.419509,-74.701921,0.)); +#184583 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#184584 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#184585 = ADVANCED_FACE('',(#184586),#184611,.F.); +#184586 = FACE_BOUND('',#184587,.F.); +#184587 = EDGE_LOOP('',(#184588,#184589,#184597,#184605)); +#184588 = ORIENTED_EDGE('',*,*,#184567,.T.); +#184589 = ORIENTED_EDGE('',*,*,#184590,.T.); +#184590 = EDGE_CURVE('',#184560,#184591,#184593,.T.); +#184591 = VERTEX_POINT('',#184592); +#184592 = CARTESIAN_POINT('',(141.383147,-75.644443,-3.5E-02)); +#184593 = LINE('',#184594,#184595); +#184594 = CARTESIAN_POINT('',(140.455557,-74.716853,-3.5E-02)); +#184595 = VECTOR('',#184596,1.); +#184596 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#184597 = ORIENTED_EDGE('',*,*,#184598,.F.); +#184598 = EDGE_CURVE('',#184599,#184591,#184601,.T.); +#184599 = VERTEX_POINT('',#184600); +#184600 = CARTESIAN_POINT('',(141.383147,-75.644443,0.)); +#184601 = LINE('',#184602,#184603); +#184602 = CARTESIAN_POINT('',(141.383147,-75.644443,0.)); +#184603 = VECTOR('',#184604,1.); +#184604 = DIRECTION('',(0.,0.,-1.)); +#184605 = ORIENTED_EDGE('',*,*,#184606,.F.); +#184606 = EDGE_CURVE('',#184568,#184599,#184607,.T.); +#184607 = LINE('',#184608,#184609); +#184608 = CARTESIAN_POINT('',(140.455557,-74.716853,0.)); +#184609 = VECTOR('',#184610,1.); +#184610 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#184611 = PLANE('',#184612); +#184612 = AXIS2_PLACEMENT_3D('',#184613,#184614,#184615); +#184613 = CARTESIAN_POINT('',(140.455557,-74.716853,0.)); +#184614 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#184615 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#184616 = ADVANCED_FACE('',(#184617),#184642,.F.); +#184617 = FACE_BOUND('',#184618,.F.); +#184618 = EDGE_LOOP('',(#184619,#184620,#184628,#184636)); +#184619 = ORIENTED_EDGE('',*,*,#184598,.T.); +#184620 = ORIENTED_EDGE('',*,*,#184621,.T.); +#184621 = EDGE_CURVE('',#184591,#184622,#184624,.T.); +#184622 = VERTEX_POINT('',#184623); +#184623 = CARTESIAN_POINT('',(141.398079,-75.680491,-3.5E-02)); +#184624 = LINE('',#184625,#184626); +#184625 = CARTESIAN_POINT('',(141.383147,-75.644443,-3.5E-02)); +#184626 = VECTOR('',#184627,1.); +#184627 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#184628 = ORIENTED_EDGE('',*,*,#184629,.F.); +#184629 = EDGE_CURVE('',#184630,#184622,#184632,.T.); +#184630 = VERTEX_POINT('',#184631); +#184631 = CARTESIAN_POINT('',(141.398079,-75.680491,0.)); +#184632 = LINE('',#184633,#184634); +#184633 = CARTESIAN_POINT('',(141.398079,-75.680491,0.)); +#184634 = VECTOR('',#184635,1.); +#184635 = DIRECTION('',(0.,0.,-1.)); +#184636 = ORIENTED_EDGE('',*,*,#184637,.F.); +#184637 = EDGE_CURVE('',#184599,#184630,#184638,.T.); +#184638 = LINE('',#184639,#184640); +#184639 = CARTESIAN_POINT('',(141.383147,-75.644443,0.)); +#184640 = VECTOR('',#184641,1.); +#184641 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#184642 = PLANE('',#184643); +#184643 = AXIS2_PLACEMENT_3D('',#184644,#184645,#184646); +#184644 = CARTESIAN_POINT('',(141.383147,-75.644443,0.)); +#184645 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#184646 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#184647 = ADVANCED_FACE('',(#184648),#184673,.F.); +#184648 = FACE_BOUND('',#184649,.F.); +#184649 = EDGE_LOOP('',(#184650,#184651,#184659,#184667)); +#184650 = ORIENTED_EDGE('',*,*,#184629,.T.); +#184651 = ORIENTED_EDGE('',*,*,#184652,.T.); +#184652 = EDGE_CURVE('',#184622,#184653,#184655,.T.); +#184653 = VERTEX_POINT('',#184654); +#184654 = CARTESIAN_POINT('',(141.398079,-76.419509,-3.5E-02)); +#184655 = LINE('',#184656,#184657); +#184656 = CARTESIAN_POINT('',(141.398079,-75.680491,-3.5E-02)); +#184657 = VECTOR('',#184658,1.); +#184658 = DIRECTION('',(0.,-1.,0.)); +#184659 = ORIENTED_EDGE('',*,*,#184660,.F.); +#184660 = EDGE_CURVE('',#184661,#184653,#184663,.T.); +#184661 = VERTEX_POINT('',#184662); +#184662 = CARTESIAN_POINT('',(141.398079,-76.419509,0.)); +#184663 = LINE('',#184664,#184665); +#184664 = CARTESIAN_POINT('',(141.398079,-76.419509,0.)); +#184665 = VECTOR('',#184666,1.); +#184666 = DIRECTION('',(0.,0.,-1.)); +#184667 = ORIENTED_EDGE('',*,*,#184668,.F.); +#184668 = EDGE_CURVE('',#184630,#184661,#184669,.T.); +#184669 = LINE('',#184670,#184671); +#184670 = CARTESIAN_POINT('',(141.398079,-75.680491,0.)); +#184671 = VECTOR('',#184672,1.); +#184672 = DIRECTION('',(0.,-1.,0.)); +#184673 = PLANE('',#184674); +#184674 = AXIS2_PLACEMENT_3D('',#184675,#184676,#184677); +#184675 = CARTESIAN_POINT('',(141.398079,-75.680491,0.)); +#184676 = DIRECTION('',(-1.,-0.,-0.)); +#184677 = DIRECTION('',(0.,-1.,0.)); +#184678 = ADVANCED_FACE('',(#184679),#184706,.T.); +#184679 = FACE_BOUND('',#184680,.F.); +#184680 = EDGE_LOOP('',(#184681,#184682,#184691,#184699)); +#184681 = ORIENTED_EDGE('',*,*,#184660,.T.); +#184682 = ORIENTED_EDGE('',*,*,#184683,.T.); +#184683 = EDGE_CURVE('',#184653,#184684,#184686,.T.); +#184684 = VERTEX_POINT('',#184685); +#184685 = CARTESIAN_POINT('',(141.201921,-76.419509,-3.5E-02)); +#184686 = CIRCLE('',#184687,0.100000456609); +#184687 = AXIS2_PLACEMENT_3D('',#184688,#184689,#184690); +#184688 = CARTESIAN_POINT('',(141.3,-76.4,-3.5E-02)); +#184689 = DIRECTION('',(-0.,0.,-1.)); +#184690 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#184691 = ORIENTED_EDGE('',*,*,#184692,.F.); +#184692 = EDGE_CURVE('',#184693,#184684,#184695,.T.); +#184693 = VERTEX_POINT('',#184694); +#184694 = CARTESIAN_POINT('',(141.201921,-76.419509,0.)); +#184695 = LINE('',#184696,#184697); +#184696 = CARTESIAN_POINT('',(141.201921,-76.419509,0.)); +#184697 = VECTOR('',#184698,1.); +#184698 = DIRECTION('',(0.,0.,-1.)); +#184699 = ORIENTED_EDGE('',*,*,#184700,.F.); +#184700 = EDGE_CURVE('',#184661,#184693,#184701,.T.); +#184701 = CIRCLE('',#184702,0.100000456609); +#184702 = AXIS2_PLACEMENT_3D('',#184703,#184704,#184705); +#184703 = CARTESIAN_POINT('',(141.3,-76.4,0.)); +#184704 = DIRECTION('',(-0.,0.,-1.)); +#184705 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#184706 = CYLINDRICAL_SURFACE('',#184707,0.100000456609); +#184707 = AXIS2_PLACEMENT_3D('',#184708,#184709,#184710); +#184708 = CARTESIAN_POINT('',(141.3,-76.4,0.)); +#184709 = DIRECTION('',(0.,-0.,1.)); +#184710 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#184711 = ADVANCED_FACE('',(#184712),#184737,.F.); +#184712 = FACE_BOUND('',#184713,.F.); +#184713 = EDGE_LOOP('',(#184714,#184715,#184723,#184731)); +#184714 = ORIENTED_EDGE('',*,*,#184692,.T.); +#184715 = ORIENTED_EDGE('',*,*,#184716,.T.); +#184716 = EDGE_CURVE('',#184684,#184717,#184719,.T.); +#184717 = VERTEX_POINT('',#184718); +#184718 = CARTESIAN_POINT('',(141.2,-75.741422,-3.5E-02)); +#184719 = LINE('',#184720,#184721); +#184720 = CARTESIAN_POINT('',(141.201921,-76.419509,-3.5E-02)); +#184721 = VECTOR('',#184722,1.); +#184722 = DIRECTION('',(-2.832958442433E-03,0.999995987165,0.)); +#184723 = ORIENTED_EDGE('',*,*,#184724,.F.); +#184724 = EDGE_CURVE('',#184725,#184717,#184727,.T.); +#184725 = VERTEX_POINT('',#184726); +#184726 = CARTESIAN_POINT('',(141.2,-75.741422,0.)); +#184727 = LINE('',#184728,#184729); +#184728 = CARTESIAN_POINT('',(141.2,-75.741422,0.)); +#184729 = VECTOR('',#184730,1.); +#184730 = DIRECTION('',(0.,0.,-1.)); +#184731 = ORIENTED_EDGE('',*,*,#184732,.F.); +#184732 = EDGE_CURVE('',#184693,#184725,#184733,.T.); +#184733 = LINE('',#184734,#184735); +#184734 = CARTESIAN_POINT('',(141.201921,-76.419509,0.)); +#184735 = VECTOR('',#184736,1.); +#184736 = DIRECTION('',(-2.832958442433E-03,0.999995987165,0.)); +#184737 = PLANE('',#184738); +#184738 = AXIS2_PLACEMENT_3D('',#184739,#184740,#184741); +#184739 = CARTESIAN_POINT('',(141.201921,-76.419509,0.)); +#184740 = DIRECTION('',(0.999995987165,2.832958442433E-03,0.)); +#184741 = DIRECTION('',(-2.832958442433E-03,0.999995987165,0.)); +#184742 = ADVANCED_FACE('',(#184743),#184768,.F.); +#184743 = FACE_BOUND('',#184744,.F.); +#184744 = EDGE_LOOP('',(#184745,#184746,#184754,#184762)); +#184745 = ORIENTED_EDGE('',*,*,#184724,.T.); +#184746 = ORIENTED_EDGE('',*,*,#184747,.T.); +#184747 = EDGE_CURVE('',#184717,#184748,#184750,.T.); +#184748 = VERTEX_POINT('',#184749); +#184749 = CARTESIAN_POINT('',(140.358578,-74.9,-3.5E-02)); +#184750 = LINE('',#184751,#184752); +#184751 = CARTESIAN_POINT('',(141.2,-75.741422,-3.5E-02)); +#184752 = VECTOR('',#184753,1.); +#184753 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184754 = ORIENTED_EDGE('',*,*,#184755,.F.); +#184755 = EDGE_CURVE('',#184756,#184748,#184758,.T.); +#184756 = VERTEX_POINT('',#184757); +#184757 = CARTESIAN_POINT('',(140.358578,-74.9,0.)); +#184758 = LINE('',#184759,#184760); +#184759 = CARTESIAN_POINT('',(140.358578,-74.9,0.)); +#184760 = VECTOR('',#184761,1.); +#184761 = DIRECTION('',(0.,0.,-1.)); +#184762 = ORIENTED_EDGE('',*,*,#184763,.F.); +#184763 = EDGE_CURVE('',#184725,#184756,#184764,.T.); +#184764 = LINE('',#184765,#184766); +#184765 = CARTESIAN_POINT('',(141.2,-75.741422,0.)); +#184766 = VECTOR('',#184767,1.); +#184767 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184768 = PLANE('',#184769); +#184769 = AXIS2_PLACEMENT_3D('',#184770,#184771,#184772); +#184770 = CARTESIAN_POINT('',(141.2,-75.741422,0.)); +#184771 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#184772 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184773 = ADVANCED_FACE('',(#184774),#184799,.F.); +#184774 = FACE_BOUND('',#184775,.F.); +#184775 = EDGE_LOOP('',(#184776,#184777,#184785,#184793)); +#184776 = ORIENTED_EDGE('',*,*,#184755,.T.); +#184777 = ORIENTED_EDGE('',*,*,#184778,.T.); +#184778 = EDGE_CURVE('',#184748,#184779,#184781,.T.); +#184779 = VERTEX_POINT('',#184780); +#184780 = CARTESIAN_POINT('',(136.641421,-74.9,-3.5E-02)); +#184781 = LINE('',#184782,#184783); +#184782 = CARTESIAN_POINT('',(140.358578,-74.9,-3.5E-02)); +#184783 = VECTOR('',#184784,1.); +#184784 = DIRECTION('',(-1.,0.,0.)); +#184785 = ORIENTED_EDGE('',*,*,#184786,.F.); +#184786 = EDGE_CURVE('',#184787,#184779,#184789,.T.); +#184787 = VERTEX_POINT('',#184788); +#184788 = CARTESIAN_POINT('',(136.641421,-74.9,0.)); +#184789 = LINE('',#184790,#184791); +#184790 = CARTESIAN_POINT('',(136.641421,-74.9,0.)); +#184791 = VECTOR('',#184792,1.); +#184792 = DIRECTION('',(0.,0.,-1.)); +#184793 = ORIENTED_EDGE('',*,*,#184794,.F.); +#184794 = EDGE_CURVE('',#184756,#184787,#184795,.T.); +#184795 = LINE('',#184796,#184797); +#184796 = CARTESIAN_POINT('',(140.358578,-74.9,0.)); +#184797 = VECTOR('',#184798,1.); +#184798 = DIRECTION('',(-1.,0.,0.)); +#184799 = PLANE('',#184800); +#184800 = AXIS2_PLACEMENT_3D('',#184801,#184802,#184803); +#184801 = CARTESIAN_POINT('',(140.358578,-74.9,0.)); +#184802 = DIRECTION('',(0.,1.,0.)); +#184803 = DIRECTION('',(-1.,0.,0.)); +#184804 = ADVANCED_FACE('',(#184805),#184830,.F.); +#184805 = FACE_BOUND('',#184806,.F.); +#184806 = EDGE_LOOP('',(#184807,#184808,#184816,#184824)); +#184807 = ORIENTED_EDGE('',*,*,#184786,.T.); +#184808 = ORIENTED_EDGE('',*,*,#184809,.T.); +#184809 = EDGE_CURVE('',#184779,#184810,#184812,.T.); +#184810 = VERTEX_POINT('',#184811); +#184811 = CARTESIAN_POINT('',(135.55,-75.991421,-3.5E-02)); +#184812 = LINE('',#184813,#184814); +#184813 = CARTESIAN_POINT('',(136.641421,-74.9,-3.5E-02)); +#184814 = VECTOR('',#184815,1.); +#184815 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184816 = ORIENTED_EDGE('',*,*,#184817,.F.); +#184817 = EDGE_CURVE('',#184818,#184810,#184820,.T.); +#184818 = VERTEX_POINT('',#184819); +#184819 = CARTESIAN_POINT('',(135.55,-75.991421,0.)); +#184820 = LINE('',#184821,#184822); +#184821 = CARTESIAN_POINT('',(135.55,-75.991421,0.)); +#184822 = VECTOR('',#184823,1.); +#184823 = DIRECTION('',(0.,0.,-1.)); +#184824 = ORIENTED_EDGE('',*,*,#184825,.F.); +#184825 = EDGE_CURVE('',#184787,#184818,#184826,.T.); +#184826 = LINE('',#184827,#184828); +#184827 = CARTESIAN_POINT('',(136.641421,-74.9,0.)); +#184828 = VECTOR('',#184829,1.); +#184829 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184830 = PLANE('',#184831); +#184831 = AXIS2_PLACEMENT_3D('',#184832,#184833,#184834); +#184832 = CARTESIAN_POINT('',(136.641421,-74.9,0.)); +#184833 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184834 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184835 = ADVANCED_FACE('',(#184836),#184863,.T.); +#184836 = FACE_BOUND('',#184837,.F.); +#184837 = EDGE_LOOP('',(#184838,#184839,#184848,#184856)); +#184838 = ORIENTED_EDGE('',*,*,#184817,.T.); +#184839 = ORIENTED_EDGE('',*,*,#184840,.T.); +#184840 = EDGE_CURVE('',#184810,#184841,#184843,.T.); +#184841 = VERTEX_POINT('',#184842); +#184842 = CARTESIAN_POINT('',(135.505557,-76.083147,-3.5E-02)); +#184843 = CIRCLE('',#184844,0.102428342669); +#184844 = AXIS2_PLACEMENT_3D('',#184845,#184846,#184847); +#184845 = CARTESIAN_POINT('',(135.44781951332,-75.99854234283,-3.5E-02) + ); +#184846 = DIRECTION('',(0.,0.,-1.)); +#184847 = DIRECTION('',(0.997580201117,6.952512020442E-02,0.)); +#184848 = ORIENTED_EDGE('',*,*,#184849,.F.); +#184849 = EDGE_CURVE('',#184850,#184841,#184852,.T.); +#184850 = VERTEX_POINT('',#184851); +#184851 = CARTESIAN_POINT('',(135.505557,-76.083147,0.)); +#184852 = LINE('',#184853,#184854); +#184853 = CARTESIAN_POINT('',(135.505557,-76.083147,0.)); +#184854 = VECTOR('',#184855,1.); +#184855 = DIRECTION('',(0.,0.,-1.)); +#184856 = ORIENTED_EDGE('',*,*,#184857,.F.); +#184857 = EDGE_CURVE('',#184818,#184850,#184858,.T.); +#184858 = CIRCLE('',#184859,0.102428342669); +#184859 = AXIS2_PLACEMENT_3D('',#184860,#184861,#184862); +#184860 = CARTESIAN_POINT('',(135.44781951332,-75.99854234283,0.)); +#184861 = DIRECTION('',(0.,0.,-1.)); +#184862 = DIRECTION('',(0.997580201117,6.952512020442E-02,0.)); +#184863 = CYLINDRICAL_SURFACE('',#184864,0.102428342669); +#184864 = AXIS2_PLACEMENT_3D('',#184865,#184866,#184867); +#184865 = CARTESIAN_POINT('',(135.44781951332,-75.99854234283,0.)); +#184866 = DIRECTION('',(-0.,-0.,1.)); +#184867 = DIRECTION('',(0.997580201117,6.952512020442E-02,0.)); +#184868 = ADVANCED_FACE('',(#184869),#184894,.F.); +#184869 = FACE_BOUND('',#184870,.F.); +#184870 = EDGE_LOOP('',(#184871,#184872,#184880,#184888)); +#184871 = ORIENTED_EDGE('',*,*,#184849,.T.); +#184872 = ORIENTED_EDGE('',*,*,#184873,.T.); +#184873 = EDGE_CURVE('',#184841,#184874,#184876,.T.); +#184874 = VERTEX_POINT('',#184875); +#184875 = CARTESIAN_POINT('',(135.469509,-76.098079,-3.5E-02)); +#184876 = LINE('',#184877,#184878); +#184877 = CARTESIAN_POINT('',(135.505557,-76.083147,-3.5E-02)); +#184878 = VECTOR('',#184879,1.); +#184879 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#184880 = ORIENTED_EDGE('',*,*,#184881,.F.); +#184881 = EDGE_CURVE('',#184882,#184874,#184884,.T.); +#184882 = VERTEX_POINT('',#184883); +#184883 = CARTESIAN_POINT('',(135.469509,-76.098079,0.)); +#184884 = LINE('',#184885,#184886); +#184885 = CARTESIAN_POINT('',(135.469509,-76.098079,0.)); +#184886 = VECTOR('',#184887,1.); +#184887 = DIRECTION('',(0.,0.,-1.)); +#184888 = ORIENTED_EDGE('',*,*,#184889,.F.); +#184889 = EDGE_CURVE('',#184850,#184882,#184890,.T.); +#184890 = LINE('',#184891,#184892); +#184891 = CARTESIAN_POINT('',(135.505557,-76.083147,0.)); +#184892 = VECTOR('',#184893,1.); +#184893 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#184894 = PLANE('',#184895); +#184895 = AXIS2_PLACEMENT_3D('',#184896,#184897,#184898); +#184896 = CARTESIAN_POINT('',(135.505557,-76.083147,0.)); +#184897 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#184898 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#184899 = ADVANCED_FACE('',(#184900),#184925,.F.); +#184900 = FACE_BOUND('',#184901,.F.); +#184901 = EDGE_LOOP('',(#184902,#184903,#184911,#184919)); +#184902 = ORIENTED_EDGE('',*,*,#184881,.T.); +#184903 = ORIENTED_EDGE('',*,*,#184904,.T.); +#184904 = EDGE_CURVE('',#184874,#184905,#184907,.T.); +#184905 = VERTEX_POINT('',#184906); +#184906 = CARTESIAN_POINT('',(134.641422,-76.1,-3.5E-02)); +#184907 = LINE('',#184908,#184909); +#184908 = CARTESIAN_POINT('',(135.469509,-76.098079,-3.5E-02)); +#184909 = VECTOR('',#184910,1.); +#184910 = DIRECTION('',(-0.999997309264,-2.319798319612E-03,0.)); +#184911 = ORIENTED_EDGE('',*,*,#184912,.F.); +#184912 = EDGE_CURVE('',#184913,#184905,#184915,.T.); +#184913 = VERTEX_POINT('',#184914); +#184914 = CARTESIAN_POINT('',(134.641422,-76.1,0.)); +#184915 = LINE('',#184916,#184917); +#184916 = CARTESIAN_POINT('',(134.641422,-76.1,0.)); +#184917 = VECTOR('',#184918,1.); +#184918 = DIRECTION('',(0.,0.,-1.)); +#184919 = ORIENTED_EDGE('',*,*,#184920,.F.); +#184920 = EDGE_CURVE('',#184882,#184913,#184921,.T.); +#184921 = LINE('',#184922,#184923); +#184922 = CARTESIAN_POINT('',(135.469509,-76.098079,0.)); +#184923 = VECTOR('',#184924,1.); +#184924 = DIRECTION('',(-0.999997309264,-2.319798319612E-03,0.)); +#184925 = PLANE('',#184926); +#184926 = AXIS2_PLACEMENT_3D('',#184927,#184928,#184929); +#184927 = CARTESIAN_POINT('',(135.469509,-76.098079,0.)); +#184928 = DIRECTION('',(-2.319798319612E-03,0.999997309264,0.)); +#184929 = DIRECTION('',(-0.999997309264,-2.319798319612E-03,0.)); +#184930 = ADVANCED_FACE('',(#184931),#184956,.F.); +#184931 = FACE_BOUND('',#184932,.F.); +#184932 = EDGE_LOOP('',(#184933,#184934,#184942,#184950)); +#184933 = ORIENTED_EDGE('',*,*,#184912,.T.); +#184934 = ORIENTED_EDGE('',*,*,#184935,.T.); +#184935 = EDGE_CURVE('',#184905,#184936,#184938,.T.); +#184936 = VERTEX_POINT('',#184937); +#184937 = CARTESIAN_POINT('',(133.549997,-77.191425,-3.5E-02)); +#184938 = LINE('',#184939,#184940); +#184939 = CARTESIAN_POINT('',(134.641422,-76.1,-3.5E-02)); +#184940 = VECTOR('',#184941,1.); +#184941 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184942 = ORIENTED_EDGE('',*,*,#184943,.F.); +#184943 = EDGE_CURVE('',#184944,#184936,#184946,.T.); +#184944 = VERTEX_POINT('',#184945); +#184945 = CARTESIAN_POINT('',(133.549997,-77.191425,0.)); +#184946 = LINE('',#184947,#184948); +#184947 = CARTESIAN_POINT('',(133.549997,-77.191425,0.)); +#184948 = VECTOR('',#184949,1.); +#184949 = DIRECTION('',(0.,0.,-1.)); +#184950 = ORIENTED_EDGE('',*,*,#184951,.F.); +#184951 = EDGE_CURVE('',#184913,#184944,#184952,.T.); +#184952 = LINE('',#184953,#184954); +#184953 = CARTESIAN_POINT('',(134.641422,-76.1,0.)); +#184954 = VECTOR('',#184955,1.); +#184955 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184956 = PLANE('',#184957); +#184957 = AXIS2_PLACEMENT_3D('',#184958,#184959,#184960); +#184958 = CARTESIAN_POINT('',(134.641422,-76.1,0.)); +#184959 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#184960 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#184961 = ADVANCED_FACE('',(#184962),#184987,.F.); +#184962 = FACE_BOUND('',#184963,.F.); +#184963 = EDGE_LOOP('',(#184964,#184965,#184973,#184981)); +#184964 = ORIENTED_EDGE('',*,*,#184943,.T.); +#184965 = ORIENTED_EDGE('',*,*,#184966,.T.); +#184966 = EDGE_CURVE('',#184936,#184967,#184969,.T.); +#184967 = VERTEX_POINT('',#184968); +#184968 = CARTESIAN_POINT('',(133.549997,-78.579363,-3.5E-02)); +#184969 = LINE('',#184970,#184971); +#184970 = CARTESIAN_POINT('',(133.549997,-77.191425,-3.5E-02)); +#184971 = VECTOR('',#184972,1.); +#184972 = DIRECTION('',(0.,-1.,0.)); +#184973 = ORIENTED_EDGE('',*,*,#184974,.F.); +#184974 = EDGE_CURVE('',#184975,#184967,#184977,.T.); +#184975 = VERTEX_POINT('',#184976); +#184976 = CARTESIAN_POINT('',(133.549997,-78.579363,0.)); +#184977 = LINE('',#184978,#184979); +#184978 = CARTESIAN_POINT('',(133.549997,-78.579363,0.)); +#184979 = VECTOR('',#184980,1.); +#184980 = DIRECTION('',(0.,0.,-1.)); +#184981 = ORIENTED_EDGE('',*,*,#184982,.F.); +#184982 = EDGE_CURVE('',#184944,#184975,#184983,.T.); +#184983 = LINE('',#184984,#184985); +#184984 = CARTESIAN_POINT('',(133.549997,-77.191425,0.)); +#184985 = VECTOR('',#184986,1.); +#184986 = DIRECTION('',(0.,-1.,0.)); +#184987 = PLANE('',#184988); +#184988 = AXIS2_PLACEMENT_3D('',#184989,#184990,#184991); +#184989 = CARTESIAN_POINT('',(133.549997,-77.191425,0.)); +#184990 = DIRECTION('',(-1.,-0.,-0.)); +#184991 = DIRECTION('',(0.,-1.,0.)); +#184992 = ADVANCED_FACE('',(#184993),#185018,.F.); +#184993 = FACE_BOUND('',#184994,.F.); +#184994 = EDGE_LOOP('',(#184995,#184996,#185004,#185012)); +#184995 = ORIENTED_EDGE('',*,*,#184974,.T.); +#184996 = ORIENTED_EDGE('',*,*,#184997,.T.); +#184997 = EDGE_CURVE('',#184967,#184998,#185000,.T.); +#184998 = VERTEX_POINT('',#184999); +#184999 = CARTESIAN_POINT('',(133.588006,-78.617372,-3.5E-02)); +#185000 = LINE('',#185001,#185002); +#185001 = CARTESIAN_POINT('',(133.549997,-78.579363,-3.5E-02)); +#185002 = VECTOR('',#185003,1.); +#185003 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#185004 = ORIENTED_EDGE('',*,*,#185005,.F.); +#185005 = EDGE_CURVE('',#185006,#184998,#185008,.T.); +#185006 = VERTEX_POINT('',#185007); +#185007 = CARTESIAN_POINT('',(133.588006,-78.617372,0.)); +#185008 = LINE('',#185009,#185010); +#185009 = CARTESIAN_POINT('',(133.588006,-78.617372,0.)); +#185010 = VECTOR('',#185011,1.); +#185011 = DIRECTION('',(0.,0.,-1.)); +#185012 = ORIENTED_EDGE('',*,*,#185013,.F.); +#185013 = EDGE_CURVE('',#184975,#185006,#185014,.T.); +#185014 = LINE('',#185015,#185016); +#185015 = CARTESIAN_POINT('',(133.549997,-78.579363,0.)); +#185016 = VECTOR('',#185017,1.); +#185017 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#185018 = PLANE('',#185019); +#185019 = AXIS2_PLACEMENT_3D('',#185020,#185021,#185022); +#185020 = CARTESIAN_POINT('',(133.549997,-78.579363,0.)); +#185021 = DIRECTION('',(-0.707106781186,-0.707106781187,-0.)); +#185022 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#185023 = ADVANCED_FACE('',(#185024),#185051,.T.); +#185024 = FACE_BOUND('',#185025,.F.); +#185025 = EDGE_LOOP('',(#185026,#185027,#185036,#185044)); +#185026 = ORIENTED_EDGE('',*,*,#185005,.T.); +#185027 = ORIENTED_EDGE('',*,*,#185028,.T.); +#185028 = EDGE_CURVE('',#184998,#185029,#185031,.T.); +#185029 = VERTEX_POINT('',#185030); +#185030 = CARTESIAN_POINT('',(133.310842,-78.502567,-3.5E-02)); +#185031 = CIRCLE('',#185032,0.299999867683); +#185032 = AXIS2_PLACEMENT_3D('',#185033,#185034,#185035); +#185033 = CARTESIAN_POINT('',(133.35000006421,-78.80000029776,-3.5E-02) + ); +#185034 = DIRECTION('',(0.,0.,-1.)); +#185035 = DIRECTION('',(0.793353469185,0.608761261032,0.)); +#185036 = ORIENTED_EDGE('',*,*,#185037,.F.); +#185037 = EDGE_CURVE('',#185038,#185029,#185040,.T.); +#185038 = VERTEX_POINT('',#185039); +#185039 = CARTESIAN_POINT('',(133.310842,-78.502567,0.)); +#185040 = LINE('',#185041,#185042); +#185041 = CARTESIAN_POINT('',(133.310842,-78.502567,0.)); +#185042 = VECTOR('',#185043,1.); +#185043 = DIRECTION('',(0.,0.,-1.)); +#185044 = ORIENTED_EDGE('',*,*,#185045,.F.); +#185045 = EDGE_CURVE('',#185006,#185038,#185046,.T.); +#185046 = CIRCLE('',#185047,0.299999867683); +#185047 = AXIS2_PLACEMENT_3D('',#185048,#185049,#185050); +#185048 = CARTESIAN_POINT('',(133.35000006421,-78.80000029776,0.)); +#185049 = DIRECTION('',(0.,0.,-1.)); +#185050 = DIRECTION('',(0.793353469185,0.608761261032,0.)); +#185051 = CYLINDRICAL_SURFACE('',#185052,0.299999867683); +#185052 = AXIS2_PLACEMENT_3D('',#185053,#185054,#185055); +#185053 = CARTESIAN_POINT('',(133.35000006421,-78.80000029776,0.)); +#185054 = DIRECTION('',(-0.,-0.,1.)); +#185055 = DIRECTION('',(0.793353469185,0.608761261032,0.)); +#185056 = ADVANCED_FACE('',(#185057),#185082,.F.); +#185057 = FACE_BOUND('',#185058,.F.); +#185058 = EDGE_LOOP('',(#185059,#185060,#185068,#185076)); +#185059 = ORIENTED_EDGE('',*,*,#185037,.T.); +#185060 = ORIENTED_EDGE('',*,*,#185061,.T.); +#185061 = EDGE_CURVE('',#185029,#185062,#185064,.T.); +#185062 = VERTEX_POINT('',#185063); +#185063 = CARTESIAN_POINT('',(133.349997,-78.502567,-3.5E-02)); +#185064 = LINE('',#185065,#185066); +#185065 = CARTESIAN_POINT('',(133.310842,-78.502567,-3.5E-02)); +#185066 = VECTOR('',#185067,1.); +#185067 = DIRECTION('',(1.,0.,0.)); +#185068 = ORIENTED_EDGE('',*,*,#185069,.F.); +#185069 = EDGE_CURVE('',#185070,#185062,#185072,.T.); +#185070 = VERTEX_POINT('',#185071); +#185071 = CARTESIAN_POINT('',(133.349997,-78.502567,0.)); +#185072 = LINE('',#185073,#185074); +#185073 = CARTESIAN_POINT('',(133.349997,-78.502567,0.)); +#185074 = VECTOR('',#185075,1.); +#185075 = DIRECTION('',(0.,0.,-1.)); +#185076 = ORIENTED_EDGE('',*,*,#185077,.F.); +#185077 = EDGE_CURVE('',#185038,#185070,#185078,.T.); +#185078 = LINE('',#185079,#185080); +#185079 = CARTESIAN_POINT('',(133.310842,-78.502567,0.)); +#185080 = VECTOR('',#185081,1.); +#185081 = DIRECTION('',(1.,0.,0.)); +#185082 = PLANE('',#185083); +#185083 = AXIS2_PLACEMENT_3D('',#185084,#185085,#185086); +#185084 = CARTESIAN_POINT('',(133.310842,-78.502567,0.)); +#185085 = DIRECTION('',(0.,-1.,0.)); +#185086 = DIRECTION('',(1.,0.,0.)); +#185087 = ADVANCED_FACE('',(#185088),#185113,.F.); +#185088 = FACE_BOUND('',#185089,.F.); +#185089 = EDGE_LOOP('',(#185090,#185091,#185099,#185107)); +#185090 = ORIENTED_EDGE('',*,*,#185069,.T.); +#185091 = ORIENTED_EDGE('',*,*,#185092,.T.); +#185092 = EDGE_CURVE('',#185062,#185093,#185095,.T.); +#185093 = VERTEX_POINT('',#185094); +#185094 = CARTESIAN_POINT('',(133.351918,-77.130494,-3.5E-02)); +#185095 = LINE('',#185096,#185097); +#185096 = CARTESIAN_POINT('',(133.349997,-78.502567,-3.5E-02)); +#185097 = VECTOR('',#185098,1.); +#185098 = DIRECTION('',(1.400069906806E-03,0.999999019902,0.)); +#185099 = ORIENTED_EDGE('',*,*,#185100,.F.); +#185100 = EDGE_CURVE('',#185101,#185093,#185103,.T.); +#185101 = VERTEX_POINT('',#185102); +#185102 = CARTESIAN_POINT('',(133.351918,-77.130494,0.)); +#185103 = LINE('',#185104,#185105); +#185104 = CARTESIAN_POINT('',(133.351918,-77.130494,0.)); +#185105 = VECTOR('',#185106,1.); +#185106 = DIRECTION('',(0.,0.,-1.)); +#185107 = ORIENTED_EDGE('',*,*,#185108,.F.); +#185108 = EDGE_CURVE('',#185070,#185101,#185109,.T.); +#185109 = LINE('',#185110,#185111); +#185110 = CARTESIAN_POINT('',(133.349997,-78.502567,0.)); +#185111 = VECTOR('',#185112,1.); +#185112 = DIRECTION('',(1.400069906806E-03,0.999999019902,0.)); +#185113 = PLANE('',#185114); +#185114 = AXIS2_PLACEMENT_3D('',#185115,#185116,#185117); +#185115 = CARTESIAN_POINT('',(133.349997,-78.502567,0.)); +#185116 = DIRECTION('',(0.999999019902,-1.400069906806E-03,0.)); +#185117 = DIRECTION('',(1.400069906806E-03,0.999999019902,0.)); +#185118 = ADVANCED_FACE('',(#185119),#185144,.F.); +#185119 = FACE_BOUND('',#185120,.F.); +#185120 = EDGE_LOOP('',(#185121,#185122,#185130,#185138)); +#185121 = ORIENTED_EDGE('',*,*,#185100,.T.); +#185122 = ORIENTED_EDGE('',*,*,#185123,.T.); +#185123 = EDGE_CURVE('',#185093,#185124,#185126,.T.); +#185124 = VERTEX_POINT('',#185125); +#185125 = CARTESIAN_POINT('',(133.36685,-77.094446,-3.5E-02)); +#185126 = LINE('',#185127,#185128); +#185127 = CARTESIAN_POINT('',(133.351918,-77.130494,-3.5E-02)); +#185128 = VECTOR('',#185129,1.); +#185129 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#185130 = ORIENTED_EDGE('',*,*,#185131,.F.); +#185131 = EDGE_CURVE('',#185132,#185124,#185134,.T.); +#185132 = VERTEX_POINT('',#185133); +#185133 = CARTESIAN_POINT('',(133.36685,-77.094446,0.)); +#185134 = LINE('',#185135,#185136); +#185135 = CARTESIAN_POINT('',(133.36685,-77.094446,0.)); +#185136 = VECTOR('',#185137,1.); +#185137 = DIRECTION('',(0.,0.,-1.)); +#185138 = ORIENTED_EDGE('',*,*,#185139,.F.); +#185139 = EDGE_CURVE('',#185101,#185132,#185140,.T.); +#185140 = LINE('',#185141,#185142); +#185141 = CARTESIAN_POINT('',(133.351918,-77.130494,0.)); +#185142 = VECTOR('',#185143,1.); +#185143 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#185144 = PLANE('',#185145); +#185145 = AXIS2_PLACEMENT_3D('',#185146,#185147,#185148); +#185146 = CARTESIAN_POINT('',(133.351918,-77.130494,0.)); +#185147 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#185148 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#185149 = ADVANCED_FACE('',(#185150),#185175,.F.); +#185150 = FACE_BOUND('',#185151,.F.); +#185151 = EDGE_LOOP('',(#185152,#185153,#185161,#185169)); +#185152 = ORIENTED_EDGE('',*,*,#185131,.T.); +#185153 = ORIENTED_EDGE('',*,*,#185154,.T.); +#185154 = EDGE_CURVE('',#185124,#185155,#185157,.T.); +#185155 = VERTEX_POINT('',#185156); +#185156 = CARTESIAN_POINT('',(134.544443,-75.916853,-3.5E-02)); +#185157 = LINE('',#185158,#185159); +#185158 = CARTESIAN_POINT('',(133.36685,-77.094446,-3.5E-02)); +#185159 = VECTOR('',#185160,1.); +#185160 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#185161 = ORIENTED_EDGE('',*,*,#185162,.F.); +#185162 = EDGE_CURVE('',#185163,#185155,#185165,.T.); +#185163 = VERTEX_POINT('',#185164); +#185164 = CARTESIAN_POINT('',(134.544443,-75.916853,0.)); +#185165 = LINE('',#185166,#185167); +#185166 = CARTESIAN_POINT('',(134.544443,-75.916853,0.)); +#185167 = VECTOR('',#185168,1.); +#185168 = DIRECTION('',(0.,0.,-1.)); +#185169 = ORIENTED_EDGE('',*,*,#185170,.F.); +#185170 = EDGE_CURVE('',#185132,#185163,#185171,.T.); +#185171 = LINE('',#185172,#185173); +#185172 = CARTESIAN_POINT('',(133.36685,-77.094446,0.)); +#185173 = VECTOR('',#185174,1.); +#185174 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#185175 = PLANE('',#185176); +#185176 = AXIS2_PLACEMENT_3D('',#185177,#185178,#185179); +#185177 = CARTESIAN_POINT('',(133.36685,-77.094446,0.)); +#185178 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#185179 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#185180 = ADVANCED_FACE('',(#185181),#185206,.F.); +#185181 = FACE_BOUND('',#185182,.F.); +#185182 = EDGE_LOOP('',(#185183,#185184,#185192,#185200)); +#185183 = ORIENTED_EDGE('',*,*,#185162,.T.); +#185184 = ORIENTED_EDGE('',*,*,#185185,.T.); +#185185 = EDGE_CURVE('',#185155,#185186,#185188,.T.); +#185186 = VERTEX_POINT('',#185187); +#185187 = CARTESIAN_POINT('',(134.580491,-75.901921,-3.5E-02)); +#185188 = LINE('',#185189,#185190); +#185189 = CARTESIAN_POINT('',(134.544443,-75.916853,-3.5E-02)); +#185190 = VECTOR('',#185191,1.); +#185191 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#185192 = ORIENTED_EDGE('',*,*,#185193,.F.); +#185193 = EDGE_CURVE('',#185194,#185186,#185196,.T.); +#185194 = VERTEX_POINT('',#185195); +#185195 = CARTESIAN_POINT('',(134.580491,-75.901921,0.)); +#185196 = LINE('',#185197,#185198); +#185197 = CARTESIAN_POINT('',(134.580491,-75.901921,0.)); +#185198 = VECTOR('',#185199,1.); +#185199 = DIRECTION('',(0.,0.,-1.)); +#185200 = ORIENTED_EDGE('',*,*,#185201,.F.); +#185201 = EDGE_CURVE('',#185163,#185194,#185202,.T.); +#185202 = LINE('',#185203,#185204); +#185203 = CARTESIAN_POINT('',(134.544443,-75.916853,0.)); +#185204 = VECTOR('',#185205,1.); +#185205 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#185206 = PLANE('',#185207); +#185207 = AXIS2_PLACEMENT_3D('',#185208,#185209,#185210); +#185208 = CARTESIAN_POINT('',(134.544443,-75.916853,0.)); +#185209 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#185210 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#185211 = ADVANCED_FACE('',(#185212),#185237,.F.); +#185212 = FACE_BOUND('',#185213,.F.); +#185213 = EDGE_LOOP('',(#185214,#185215,#185223,#185231)); +#185214 = ORIENTED_EDGE('',*,*,#185193,.T.); +#185215 = ORIENTED_EDGE('',*,*,#185216,.T.); +#185216 = EDGE_CURVE('',#185186,#185217,#185219,.T.); +#185217 = VERTEX_POINT('',#185218); +#185218 = CARTESIAN_POINT('',(135.364551,-75.9,-3.5E-02)); +#185219 = LINE('',#185220,#185221); +#185220 = CARTESIAN_POINT('',(134.580491,-75.901921,-3.5E-02)); +#185221 = VECTOR('',#185222,1.); +#185222 = DIRECTION('',(0.999996998598,2.450060243224E-03,0.)); +#185223 = ORIENTED_EDGE('',*,*,#185224,.F.); +#185224 = EDGE_CURVE('',#185225,#185217,#185227,.T.); +#185225 = VERTEX_POINT('',#185226); +#185226 = CARTESIAN_POINT('',(135.364551,-75.9,0.)); +#185227 = LINE('',#185228,#185229); +#185228 = CARTESIAN_POINT('',(135.364551,-75.9,0.)); +#185229 = VECTOR('',#185230,1.); +#185230 = DIRECTION('',(0.,0.,-1.)); +#185231 = ORIENTED_EDGE('',*,*,#185232,.F.); +#185232 = EDGE_CURVE('',#185194,#185225,#185233,.T.); +#185233 = LINE('',#185234,#185235); +#185234 = CARTESIAN_POINT('',(134.580491,-75.901921,0.)); +#185235 = VECTOR('',#185236,1.); +#185236 = DIRECTION('',(0.999996998598,2.450060243224E-03,0.)); +#185237 = PLANE('',#185238); +#185238 = AXIS2_PLACEMENT_3D('',#185239,#185240,#185241); +#185239 = CARTESIAN_POINT('',(134.580491,-75.901921,0.)); +#185240 = DIRECTION('',(2.450060243224E-03,-0.999996998598,0.)); +#185241 = DIRECTION('',(0.999996998598,2.450060243224E-03,0.)); +#185242 = ADVANCED_FACE('',(#185243),#185268,.F.); +#185243 = FACE_BOUND('',#185244,.F.); +#185244 = EDGE_LOOP('',(#185245,#185246,#185254,#185262)); +#185245 = ORIENTED_EDGE('',*,*,#185224,.T.); +#185246 = ORIENTED_EDGE('',*,*,#185247,.T.); +#185247 = EDGE_CURVE('',#185217,#185248,#185250,.T.); +#185248 = VERTEX_POINT('',#185249); +#185249 = CARTESIAN_POINT('',(135.379289,-75.879289,-3.5E-02)); +#185250 = LINE('',#185251,#185252); +#185251 = CARTESIAN_POINT('',(135.364551,-75.9,-3.5E-02)); +#185252 = VECTOR('',#185253,1.); +#185253 = DIRECTION('',(0.579789676421,0.814766181868,0.)); +#185254 = ORIENTED_EDGE('',*,*,#185255,.F.); +#185255 = EDGE_CURVE('',#185256,#185248,#185258,.T.); +#185256 = VERTEX_POINT('',#185257); +#185257 = CARTESIAN_POINT('',(135.379289,-75.879289,0.)); +#185258 = LINE('',#185259,#185260); +#185259 = CARTESIAN_POINT('',(135.379289,-75.879289,0.)); +#185260 = VECTOR('',#185261,1.); +#185261 = DIRECTION('',(0.,0.,-1.)); +#185262 = ORIENTED_EDGE('',*,*,#185263,.F.); +#185263 = EDGE_CURVE('',#185225,#185256,#185264,.T.); +#185264 = LINE('',#185265,#185266); +#185265 = CARTESIAN_POINT('',(135.364551,-75.9,0.)); +#185266 = VECTOR('',#185267,1.); +#185267 = DIRECTION('',(0.579789676421,0.814766181868,0.)); +#185268 = PLANE('',#185269); +#185269 = AXIS2_PLACEMENT_3D('',#185270,#185271,#185272); +#185270 = CARTESIAN_POINT('',(135.364551,-75.9,0.)); +#185271 = DIRECTION('',(0.814766181868,-0.579789676421,0.)); +#185272 = DIRECTION('',(0.579789676421,0.814766181868,0.)); +#185273 = ADVANCED_FACE('',(#185274),#185290,.F.); +#185274 = FACE_BOUND('',#185275,.F.); +#185275 = EDGE_LOOP('',(#185276,#185277,#185283,#185284)); +#185276 = ORIENTED_EDGE('',*,*,#185255,.T.); +#185277 = ORIENTED_EDGE('',*,*,#185278,.T.); +#185278 = EDGE_CURVE('',#185248,#184490,#185279,.T.); +#185279 = LINE('',#185280,#185281); +#185280 = CARTESIAN_POINT('',(135.379289,-75.879289,-3.5E-02)); +#185281 = VECTOR('',#185282,1.); +#185282 = DIRECTION('',(0.70793170554,0.706280893335,0.)); +#185283 = ORIENTED_EDGE('',*,*,#184487,.F.); +#185284 = ORIENTED_EDGE('',*,*,#185285,.F.); +#185285 = EDGE_CURVE('',#185256,#184488,#185286,.T.); +#185286 = LINE('',#185287,#185288); +#185287 = CARTESIAN_POINT('',(135.379289,-75.879289,0.)); +#185288 = VECTOR('',#185289,1.); +#185289 = DIRECTION('',(0.70793170554,0.706280893335,0.)); +#185290 = PLANE('',#185291); +#185291 = AXIS2_PLACEMENT_3D('',#185292,#185293,#185294); +#185292 = CARTESIAN_POINT('',(135.379289,-75.879289,0.)); +#185293 = DIRECTION('',(0.706280893335,-0.70793170554,0.)); +#185294 = DIRECTION('',(0.70793170554,0.706280893335,0.)); +#185295 = ADVANCED_FACE('',(#185296),#185323,.F.); +#185296 = FACE_BOUND('',#185297,.F.); +#185297 = EDGE_LOOP('',(#185298,#185308,#185315,#185316)); +#185298 = ORIENTED_EDGE('',*,*,#185299,.T.); +#185299 = EDGE_CURVE('',#185300,#185302,#185304,.T.); +#185300 = VERTEX_POINT('',#185301); +#185301 = CARTESIAN_POINT('',(133.487255,-78.8,0.)); +#185302 = VERTEX_POINT('',#185303); +#185303 = CARTESIAN_POINT('',(133.487255,-78.8,-3.5E-02)); +#185304 = LINE('',#185305,#185306); +#185305 = CARTESIAN_POINT('',(133.487255,-78.8,0.)); +#185306 = VECTOR('',#185307,1.); +#185307 = DIRECTION('',(0.,0.,-1.)); +#185308 = ORIENTED_EDGE('',*,*,#185309,.T.); +#185309 = EDGE_CURVE('',#185302,#185302,#185310,.T.); +#185310 = CIRCLE('',#185311,0.137255); +#185311 = AXIS2_PLACEMENT_3D('',#185312,#185313,#185314); +#185312 = CARTESIAN_POINT('',(133.35,-78.8,-3.5E-02)); +#185313 = DIRECTION('',(0.,0.,1.)); +#185314 = DIRECTION('',(1.,0.,-0.)); +#185315 = ORIENTED_EDGE('',*,*,#185299,.F.); +#185316 = ORIENTED_EDGE('',*,*,#185317,.F.); +#185317 = EDGE_CURVE('',#185300,#185300,#185318,.T.); +#185318 = CIRCLE('',#185319,0.137255); +#185319 = AXIS2_PLACEMENT_3D('',#185320,#185321,#185322); +#185320 = CARTESIAN_POINT('',(133.35,-78.8,0.)); +#185321 = DIRECTION('',(0.,0.,1.)); +#185322 = DIRECTION('',(1.,0.,-0.)); +#185323 = CYLINDRICAL_SURFACE('',#185324,0.137255); +#185324 = AXIS2_PLACEMENT_3D('',#185325,#185326,#185327); +#185325 = CARTESIAN_POINT('',(133.35,-78.8,0.)); +#185326 = DIRECTION('',(0.,0.,1.)); +#185327 = DIRECTION('',(1.,0.,-0.)); +#185328 = ADVANCED_FACE('',(#185329,#185357),#185360,.F.); +#185329 = FACE_BOUND('',#185330,.F.); +#185330 = EDGE_LOOP('',(#185331,#185332,#185333,#185334,#185335,#185336, + #185337,#185338,#185339,#185340,#185341,#185342,#185343,#185344, + #185345,#185346,#185347,#185348,#185349,#185350,#185351,#185352, + #185353,#185354,#185355,#185356)); +#185331 = ORIENTED_EDGE('',*,*,#184513,.T.); +#185332 = ORIENTED_EDGE('',*,*,#184544,.T.); +#185333 = ORIENTED_EDGE('',*,*,#184575,.T.); +#185334 = ORIENTED_EDGE('',*,*,#184606,.T.); +#185335 = ORIENTED_EDGE('',*,*,#184637,.T.); +#185336 = ORIENTED_EDGE('',*,*,#184668,.T.); +#185337 = ORIENTED_EDGE('',*,*,#184700,.T.); +#185338 = ORIENTED_EDGE('',*,*,#184732,.T.); +#185339 = ORIENTED_EDGE('',*,*,#184763,.T.); +#185340 = ORIENTED_EDGE('',*,*,#184794,.T.); +#185341 = ORIENTED_EDGE('',*,*,#184825,.T.); +#185342 = ORIENTED_EDGE('',*,*,#184857,.T.); +#185343 = ORIENTED_EDGE('',*,*,#184889,.T.); +#185344 = ORIENTED_EDGE('',*,*,#184920,.T.); +#185345 = ORIENTED_EDGE('',*,*,#184951,.T.); +#185346 = ORIENTED_EDGE('',*,*,#184982,.T.); +#185347 = ORIENTED_EDGE('',*,*,#185013,.T.); +#185348 = ORIENTED_EDGE('',*,*,#185045,.T.); +#185349 = ORIENTED_EDGE('',*,*,#185077,.T.); +#185350 = ORIENTED_EDGE('',*,*,#185108,.T.); +#185351 = ORIENTED_EDGE('',*,*,#185139,.T.); +#185352 = ORIENTED_EDGE('',*,*,#185170,.T.); +#185353 = ORIENTED_EDGE('',*,*,#185201,.T.); +#185354 = ORIENTED_EDGE('',*,*,#185232,.T.); +#185355 = ORIENTED_EDGE('',*,*,#185263,.T.); +#185356 = ORIENTED_EDGE('',*,*,#185285,.T.); +#185357 = FACE_BOUND('',#185358,.F.); +#185358 = EDGE_LOOP('',(#185359)); +#185359 = ORIENTED_EDGE('',*,*,#185317,.T.); +#185360 = PLANE('',#185361); +#185361 = AXIS2_PLACEMENT_3D('',#185362,#185363,#185364); +#185362 = CARTESIAN_POINT('',(0.,0.,0.)); +#185363 = DIRECTION('',(-0.,-0.,-1.)); +#185364 = DIRECTION('',(-1.,0.,0.)); +#185365 = ADVANCED_FACE('',(#185366,#185394),#185397,.T.); +#185366 = FACE_BOUND('',#185367,.T.); +#185367 = EDGE_LOOP('',(#185368,#185369,#185370,#185371,#185372,#185373, + #185374,#185375,#185376,#185377,#185378,#185379,#185380,#185381, + #185382,#185383,#185384,#185385,#185386,#185387,#185388,#185389, + #185390,#185391,#185392,#185393)); +#185368 = ORIENTED_EDGE('',*,*,#184497,.T.); +#185369 = ORIENTED_EDGE('',*,*,#184528,.T.); +#185370 = ORIENTED_EDGE('',*,*,#184559,.T.); +#185371 = ORIENTED_EDGE('',*,*,#184590,.T.); +#185372 = ORIENTED_EDGE('',*,*,#184621,.T.); +#185373 = ORIENTED_EDGE('',*,*,#184652,.T.); +#185374 = ORIENTED_EDGE('',*,*,#184683,.T.); +#185375 = ORIENTED_EDGE('',*,*,#184716,.T.); +#185376 = ORIENTED_EDGE('',*,*,#184747,.T.); +#185377 = ORIENTED_EDGE('',*,*,#184778,.T.); +#185378 = ORIENTED_EDGE('',*,*,#184809,.T.); +#185379 = ORIENTED_EDGE('',*,*,#184840,.T.); +#185380 = ORIENTED_EDGE('',*,*,#184873,.T.); +#185381 = ORIENTED_EDGE('',*,*,#184904,.T.); +#185382 = ORIENTED_EDGE('',*,*,#184935,.T.); +#185383 = ORIENTED_EDGE('',*,*,#184966,.T.); +#185384 = ORIENTED_EDGE('',*,*,#184997,.T.); +#185385 = ORIENTED_EDGE('',*,*,#185028,.T.); +#185386 = ORIENTED_EDGE('',*,*,#185061,.T.); +#185387 = ORIENTED_EDGE('',*,*,#185092,.T.); +#185388 = ORIENTED_EDGE('',*,*,#185123,.T.); +#185389 = ORIENTED_EDGE('',*,*,#185154,.T.); +#185390 = ORIENTED_EDGE('',*,*,#185185,.T.); +#185391 = ORIENTED_EDGE('',*,*,#185216,.T.); +#185392 = ORIENTED_EDGE('',*,*,#185247,.T.); +#185393 = ORIENTED_EDGE('',*,*,#185278,.T.); +#185394 = FACE_BOUND('',#185395,.T.); +#185395 = EDGE_LOOP('',(#185396)); +#185396 = ORIENTED_EDGE('',*,*,#185309,.T.); +#185397 = PLANE('',#185398); +#185398 = AXIS2_PLACEMENT_3D('',#185399,#185400,#185401); +#185399 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#185400 = DIRECTION('',(-0.,-0.,-1.)); +#185401 = DIRECTION('',(-1.,0.,0.)); +#185402 = MANIFOLD_SOLID_BREP('',#185403); +#185403 = CLOSED_SHELL('',(#185404,#185444,#185475,#185506,#185537, + #185570,#185601,#185632,#185665,#185696,#185729,#185751,#185784, + #185817,#185842)); +#185404 = ADVANCED_FACE('',(#185405),#185439,.F.); +#185405 = FACE_BOUND('',#185406,.F.); +#185406 = EDGE_LOOP('',(#185407,#185417,#185425,#185433)); +#185407 = ORIENTED_EDGE('',*,*,#185408,.T.); +#185408 = EDGE_CURVE('',#185409,#185411,#185413,.T.); +#185409 = VERTEX_POINT('',#185410); +#185410 = CARTESIAN_POINT('',(127.905396,-74.075735,0.)); +#185411 = VERTEX_POINT('',#185412); +#185412 = CARTESIAN_POINT('',(127.905396,-74.075735,-3.5E-02)); +#185413 = LINE('',#185414,#185415); +#185414 = CARTESIAN_POINT('',(127.905396,-74.075735,0.)); +#185415 = VECTOR('',#185416,1.); +#185416 = DIRECTION('',(0.,0.,-1.)); +#185417 = ORIENTED_EDGE('',*,*,#185418,.T.); +#185418 = EDGE_CURVE('',#185411,#185419,#185421,.T.); +#185419 = VERTEX_POINT('',#185420); +#185420 = CARTESIAN_POINT('',(127.945244,-74.077656,-3.5E-02)); +#185421 = LINE('',#185422,#185423); +#185422 = CARTESIAN_POINT('',(127.905396,-74.075735,-3.5E-02)); +#185423 = VECTOR('',#185424,1.); +#185424 = DIRECTION('',(0.998840006657,-4.815226994575E-02,0.)); +#185425 = ORIENTED_EDGE('',*,*,#185426,.F.); +#185426 = EDGE_CURVE('',#185427,#185419,#185429,.T.); +#185427 = VERTEX_POINT('',#185428); +#185428 = CARTESIAN_POINT('',(127.945244,-74.077656,0.)); +#185429 = LINE('',#185430,#185431); +#185430 = CARTESIAN_POINT('',(127.945244,-74.077656,0.)); +#185431 = VECTOR('',#185432,1.); +#185432 = DIRECTION('',(0.,0.,-1.)); +#185433 = ORIENTED_EDGE('',*,*,#185434,.F.); +#185434 = EDGE_CURVE('',#185409,#185427,#185435,.T.); +#185435 = LINE('',#185436,#185437); +#185436 = CARTESIAN_POINT('',(127.905396,-74.075735,0.)); +#185437 = VECTOR('',#185438,1.); +#185438 = DIRECTION('',(0.998840006657,-4.815226994575E-02,0.)); +#185439 = PLANE('',#185440); +#185440 = AXIS2_PLACEMENT_3D('',#185441,#185442,#185443); +#185441 = CARTESIAN_POINT('',(127.905396,-74.075735,0.)); +#185442 = DIRECTION('',(-4.815226994575E-02,-0.998840006657,-0.)); +#185443 = DIRECTION('',(0.998840006657,-4.815226994575E-02,0.)); +#185444 = ADVANCED_FACE('',(#185445),#185470,.F.); +#185445 = FACE_BOUND('',#185446,.F.); +#185446 = EDGE_LOOP('',(#185447,#185448,#185456,#185464)); +#185447 = ORIENTED_EDGE('',*,*,#185426,.T.); +#185448 = ORIENTED_EDGE('',*,*,#185449,.T.); +#185449 = EDGE_CURVE('',#185419,#185450,#185452,.T.); +#185450 = VERTEX_POINT('',#185451); +#185451 = CARTESIAN_POINT('',(127.981292,-74.092588,-3.5E-02)); +#185452 = LINE('',#185453,#185454); +#185453 = CARTESIAN_POINT('',(127.945244,-74.077656,-3.5E-02)); +#185454 = VECTOR('',#185455,1.); +#185455 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#185456 = ORIENTED_EDGE('',*,*,#185457,.F.); +#185457 = EDGE_CURVE('',#185458,#185450,#185460,.T.); +#185458 = VERTEX_POINT('',#185459); +#185459 = CARTESIAN_POINT('',(127.981292,-74.092588,0.)); +#185460 = LINE('',#185461,#185462); +#185461 = CARTESIAN_POINT('',(127.981292,-74.092588,0.)); +#185462 = VECTOR('',#185463,1.); +#185463 = DIRECTION('',(0.,0.,-1.)); +#185464 = ORIENTED_EDGE('',*,*,#185465,.F.); +#185465 = EDGE_CURVE('',#185427,#185458,#185466,.T.); +#185466 = LINE('',#185467,#185468); +#185467 = CARTESIAN_POINT('',(127.945244,-74.077656,0.)); +#185468 = VECTOR('',#185469,1.); +#185469 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#185470 = PLANE('',#185471); +#185471 = AXIS2_PLACEMENT_3D('',#185472,#185473,#185474); +#185472 = CARTESIAN_POINT('',(127.945244,-74.077656,0.)); +#185473 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#185474 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#185475 = ADVANCED_FACE('',(#185476),#185501,.F.); +#185476 = FACE_BOUND('',#185477,.F.); +#185477 = EDGE_LOOP('',(#185478,#185479,#185487,#185495)); +#185478 = ORIENTED_EDGE('',*,*,#185457,.T.); +#185479 = ORIENTED_EDGE('',*,*,#185480,.T.); +#185480 = EDGE_CURVE('',#185450,#185481,#185483,.T.); +#185481 = VERTEX_POINT('',#185482); +#185482 = CARTESIAN_POINT('',(130.82192,-76.930499,-3.5E-02)); +#185483 = LINE('',#185484,#185485); +#185484 = CARTESIAN_POINT('',(127.981292,-74.092588,-3.5E-02)); +#185485 = VECTOR('',#185486,1.); +#185486 = DIRECTION('',(0.707445028275,-0.706768372218,0.)); +#185487 = ORIENTED_EDGE('',*,*,#185488,.F.); +#185488 = EDGE_CURVE('',#185489,#185481,#185491,.T.); +#185489 = VERTEX_POINT('',#185490); +#185490 = CARTESIAN_POINT('',(130.82192,-76.930499,0.)); +#185491 = LINE('',#185492,#185493); +#185492 = CARTESIAN_POINT('',(130.82192,-76.930499,0.)); +#185493 = VECTOR('',#185494,1.); +#185494 = DIRECTION('',(0.,0.,-1.)); +#185495 = ORIENTED_EDGE('',*,*,#185496,.F.); +#185496 = EDGE_CURVE('',#185458,#185489,#185497,.T.); +#185497 = LINE('',#185498,#185499); +#185498 = CARTESIAN_POINT('',(127.981292,-74.092588,0.)); +#185499 = VECTOR('',#185500,1.); +#185500 = DIRECTION('',(0.707445028275,-0.706768372218,0.)); +#185501 = PLANE('',#185502); +#185502 = AXIS2_PLACEMENT_3D('',#185503,#185504,#185505); +#185503 = CARTESIAN_POINT('',(127.981292,-74.092588,0.)); +#185504 = DIRECTION('',(-0.706768372218,-0.707445028275,-0.)); +#185505 = DIRECTION('',(0.707445028275,-0.706768372218,0.)); +#185506 = ADVANCED_FACE('',(#185507),#185532,.F.); +#185507 = FACE_BOUND('',#185508,.F.); +#185508 = EDGE_LOOP('',(#185509,#185510,#185518,#185526)); +#185509 = ORIENTED_EDGE('',*,*,#185488,.T.); +#185510 = ORIENTED_EDGE('',*,*,#185511,.T.); +#185511 = EDGE_CURVE('',#185481,#185512,#185514,.T.); +#185512 = VERTEX_POINT('',#185513); +#185513 = CARTESIAN_POINT('',(130.835195,-76.922836,-3.5E-02)); +#185514 = LINE('',#185515,#185516); +#185515 = CARTESIAN_POINT('',(130.82192,-76.930499,-3.5E-02)); +#185516 = VECTOR('',#185517,1.); +#185517 = DIRECTION('',(0.866062827368,0.499935174849,0.)); +#185518 = ORIENTED_EDGE('',*,*,#185519,.F.); +#185519 = EDGE_CURVE('',#185520,#185512,#185522,.T.); +#185520 = VERTEX_POINT('',#185521); +#185521 = CARTESIAN_POINT('',(130.835195,-76.922836,0.)); +#185522 = LINE('',#185523,#185524); +#185523 = CARTESIAN_POINT('',(130.835195,-76.922836,0.)); +#185524 = VECTOR('',#185525,1.); +#185525 = DIRECTION('',(0.,0.,-1.)); +#185526 = ORIENTED_EDGE('',*,*,#185527,.F.); +#185527 = EDGE_CURVE('',#185489,#185520,#185528,.T.); +#185528 = LINE('',#185529,#185530); +#185529 = CARTESIAN_POINT('',(130.82192,-76.930499,0.)); +#185530 = VECTOR('',#185531,1.); +#185531 = DIRECTION('',(0.866062827368,0.499935174849,0.)); +#185532 = PLANE('',#185533); +#185533 = AXIS2_PLACEMENT_3D('',#185534,#185535,#185536); +#185534 = CARTESIAN_POINT('',(130.82192,-76.930499,0.)); +#185535 = DIRECTION('',(0.499935174849,-0.866062827368,0.)); +#185536 = DIRECTION('',(0.866062827368,0.499935174849,0.)); +#185537 = ADVANCED_FACE('',(#185538),#185565,.T.); +#185538 = FACE_BOUND('',#185539,.F.); +#185539 = EDGE_LOOP('',(#185540,#185541,#185550,#185558)); +#185540 = ORIENTED_EDGE('',*,*,#185519,.T.); +#185541 = ORIENTED_EDGE('',*,*,#185542,.T.); +#185542 = EDGE_CURVE('',#185512,#185543,#185545,.T.); +#185543 = VERTEX_POINT('',#185544); +#185544 = CARTESIAN_POINT('',(130.672836,-77.085195,-3.5E-02)); +#185545 = CIRCLE('',#185546,0.299999934501); +#185546 = AXIS2_PLACEMENT_3D('',#185547,#185548,#185549); +#185547 = CARTESIAN_POINT('',(130.9499998594,-77.1999998594,-3.5E-02)); +#185548 = DIRECTION('',(-0.,0.,-1.)); +#185549 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#185550 = ORIENTED_EDGE('',*,*,#185551,.F.); +#185551 = EDGE_CURVE('',#185552,#185543,#185554,.T.); +#185552 = VERTEX_POINT('',#185553); +#185553 = CARTESIAN_POINT('',(130.672836,-77.085195,0.)); +#185554 = LINE('',#185555,#185556); +#185555 = CARTESIAN_POINT('',(130.672836,-77.085195,0.)); +#185556 = VECTOR('',#185557,1.); +#185557 = DIRECTION('',(0.,0.,-1.)); +#185558 = ORIENTED_EDGE('',*,*,#185559,.F.); +#185559 = EDGE_CURVE('',#185520,#185552,#185560,.T.); +#185560 = CIRCLE('',#185561,0.299999934501); +#185561 = AXIS2_PLACEMENT_3D('',#185562,#185563,#185564); +#185562 = CARTESIAN_POINT('',(130.9499998594,-77.1999998594,0.)); +#185563 = DIRECTION('',(-0.,0.,-1.)); +#185564 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#185565 = CYLINDRICAL_SURFACE('',#185566,0.299999934501); +#185566 = AXIS2_PLACEMENT_3D('',#185567,#185568,#185569); +#185567 = CARTESIAN_POINT('',(130.9499998594,-77.1999998594,0.)); +#185568 = DIRECTION('',(0.,-0.,1.)); +#185569 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#185570 = ADVANCED_FACE('',(#185571),#185596,.F.); +#185571 = FACE_BOUND('',#185572,.F.); +#185572 = EDGE_LOOP('',(#185573,#185574,#185582,#185590)); +#185573 = ORIENTED_EDGE('',*,*,#185551,.T.); +#185574 = ORIENTED_EDGE('',*,*,#185575,.T.); +#185575 = EDGE_CURVE('',#185543,#185576,#185578,.T.); +#185576 = VERTEX_POINT('',#185577); +#185577 = CARTESIAN_POINT('',(130.680499,-77.07192,-3.5E-02)); +#185578 = LINE('',#185579,#185580); +#185579 = CARTESIAN_POINT('',(130.672836,-77.085195,-3.5E-02)); +#185580 = VECTOR('',#185581,1.); +#185581 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#185582 = ORIENTED_EDGE('',*,*,#185583,.F.); +#185583 = EDGE_CURVE('',#185584,#185576,#185586,.T.); +#185584 = VERTEX_POINT('',#185585); +#185585 = CARTESIAN_POINT('',(130.680499,-77.07192,0.)); +#185586 = LINE('',#185587,#185588); +#185587 = CARTESIAN_POINT('',(130.680499,-77.07192,0.)); +#185588 = VECTOR('',#185589,1.); +#185589 = DIRECTION('',(0.,0.,-1.)); +#185590 = ORIENTED_EDGE('',*,*,#185591,.F.); +#185591 = EDGE_CURVE('',#185552,#185584,#185592,.T.); +#185592 = LINE('',#185593,#185594); +#185593 = CARTESIAN_POINT('',(130.672836,-77.085195,0.)); +#185594 = VECTOR('',#185595,1.); +#185595 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#185596 = PLANE('',#185597); +#185597 = AXIS2_PLACEMENT_3D('',#185598,#185599,#185600); +#185598 = CARTESIAN_POINT('',(130.672836,-77.085195,0.)); +#185599 = DIRECTION('',(0.866062827368,-0.49993517485,0.)); +#185600 = DIRECTION('',(0.49993517485,0.866062827368,0.)); +#185601 = ADVANCED_FACE('',(#185602),#185627,.F.); +#185602 = FACE_BOUND('',#185603,.F.); +#185603 = EDGE_LOOP('',(#185604,#185605,#185613,#185621)); +#185604 = ORIENTED_EDGE('',*,*,#185583,.T.); +#185605 = ORIENTED_EDGE('',*,*,#185606,.T.); +#185606 = EDGE_CURVE('',#185576,#185607,#185609,.T.); +#185607 = VERTEX_POINT('',#185608); +#185608 = CARTESIAN_POINT('',(127.900583,-74.292005,-3.5E-02)); +#185609 = LINE('',#185610,#185611); +#185610 = CARTESIAN_POINT('',(130.680499,-77.07192,-3.5E-02)); +#185611 = VECTOR('',#185612,1.); +#185612 = DIRECTION('',(-0.707106908368,0.707106654005,0.)); +#185613 = ORIENTED_EDGE('',*,*,#185614,.F.); +#185614 = EDGE_CURVE('',#185615,#185607,#185617,.T.); +#185615 = VERTEX_POINT('',#185616); +#185616 = CARTESIAN_POINT('',(127.900583,-74.292005,0.)); +#185617 = LINE('',#185618,#185619); +#185618 = CARTESIAN_POINT('',(127.900583,-74.292005,0.)); +#185619 = VECTOR('',#185620,1.); +#185620 = DIRECTION('',(0.,0.,-1.)); +#185621 = ORIENTED_EDGE('',*,*,#185622,.F.); +#185622 = EDGE_CURVE('',#185584,#185615,#185623,.T.); +#185623 = LINE('',#185624,#185625); +#185624 = CARTESIAN_POINT('',(130.680499,-77.07192,0.)); +#185625 = VECTOR('',#185626,1.); +#185626 = DIRECTION('',(-0.707106908368,0.707106654005,0.)); +#185627 = PLANE('',#185628); +#185628 = AXIS2_PLACEMENT_3D('',#185629,#185630,#185631); +#185629 = CARTESIAN_POINT('',(130.680499,-77.07192,0.)); +#185630 = DIRECTION('',(0.707106654005,0.707106908368,0.)); +#185631 = DIRECTION('',(-0.707106908368,0.707106654005,0.)); +#185632 = ADVANCED_FACE('',(#185633),#185660,.T.); +#185633 = FACE_BOUND('',#185634,.F.); +#185634 = EDGE_LOOP('',(#185635,#185636,#185645,#185653)); +#185635 = ORIENTED_EDGE('',*,*,#185614,.T.); +#185636 = ORIENTED_EDGE('',*,*,#185637,.T.); +#185637 = EDGE_CURVE('',#185607,#185638,#185640,.T.); +#185638 = VERTEX_POINT('',#185639); +#185639 = CARTESIAN_POINT('',(127.663423,-74.473168,-3.5E-02)); +#185640 = CIRCLE('',#185641,0.299182889366); +#185641 = AXIS2_PLACEMENT_3D('',#185642,#185643,#185644); +#185642 = CARTESIAN_POINT('',(127.62458892688,-74.17651615683,-3.5E-02) + ); +#185643 = DIRECTION('',(0.,0.,-1.)); +#185644 = DIRECTION('',(0.922492839404,-0.386014198247,0.)); +#185645 = ORIENTED_EDGE('',*,*,#185646,.F.); +#185646 = EDGE_CURVE('',#185647,#185638,#185649,.T.); +#185647 = VERTEX_POINT('',#185648); +#185648 = CARTESIAN_POINT('',(127.663423,-74.473168,0.)); +#185649 = LINE('',#185650,#185651); +#185650 = CARTESIAN_POINT('',(127.663423,-74.473168,0.)); +#185651 = VECTOR('',#185652,1.); +#185652 = DIRECTION('',(0.,0.,-1.)); +#185653 = ORIENTED_EDGE('',*,*,#185654,.F.); +#185654 = EDGE_CURVE('',#185615,#185647,#185655,.T.); +#185655 = CIRCLE('',#185656,0.299182889366); +#185656 = AXIS2_PLACEMENT_3D('',#185657,#185658,#185659); +#185657 = CARTESIAN_POINT('',(127.62458892688,-74.17651615683,0.)); +#185658 = DIRECTION('',(0.,0.,-1.)); +#185659 = DIRECTION('',(0.922492839404,-0.386014198247,0.)); +#185660 = CYLINDRICAL_SURFACE('',#185661,0.299182889366); +#185661 = AXIS2_PLACEMENT_3D('',#185662,#185663,#185664); +#185662 = CARTESIAN_POINT('',(127.62458892688,-74.17651615683,0.)); +#185663 = DIRECTION('',(-0.,-0.,1.)); +#185664 = DIRECTION('',(0.922492839404,-0.386014198247,0.)); +#185665 = ADVANCED_FACE('',(#185666),#185691,.F.); +#185666 = FACE_BOUND('',#185667,.F.); +#185667 = EDGE_LOOP('',(#185668,#185669,#185677,#185685)); +#185668 = ORIENTED_EDGE('',*,*,#185646,.T.); +#185669 = ORIENTED_EDGE('',*,*,#185670,.T.); +#185670 = EDGE_CURVE('',#185638,#185671,#185673,.T.); +#185671 = VERTEX_POINT('',#185672); +#185672 = CARTESIAN_POINT('',(127.585107,-74.473168,-3.5E-02)); +#185673 = LINE('',#185674,#185675); +#185674 = CARTESIAN_POINT('',(127.663423,-74.473168,-3.5E-02)); +#185675 = VECTOR('',#185676,1.); +#185676 = DIRECTION('',(-1.,0.,0.)); +#185677 = ORIENTED_EDGE('',*,*,#185678,.F.); +#185678 = EDGE_CURVE('',#185679,#185671,#185681,.T.); +#185679 = VERTEX_POINT('',#185680); +#185680 = CARTESIAN_POINT('',(127.585107,-74.473168,0.)); +#185681 = LINE('',#185682,#185683); +#185682 = CARTESIAN_POINT('',(127.585107,-74.473168,0.)); +#185683 = VECTOR('',#185684,1.); +#185684 = DIRECTION('',(0.,0.,-1.)); +#185685 = ORIENTED_EDGE('',*,*,#185686,.F.); +#185686 = EDGE_CURVE('',#185647,#185679,#185687,.T.); +#185687 = LINE('',#185688,#185689); +#185688 = CARTESIAN_POINT('',(127.663423,-74.473168,0.)); +#185689 = VECTOR('',#185690,1.); +#185690 = DIRECTION('',(-1.,0.,0.)); +#185691 = PLANE('',#185692); +#185692 = AXIS2_PLACEMENT_3D('',#185693,#185694,#185695); +#185693 = CARTESIAN_POINT('',(127.663423,-74.473168,0.)); +#185694 = DIRECTION('',(0.,1.,0.)); +#185695 = DIRECTION('',(-1.,0.,0.)); +#185696 = ADVANCED_FACE('',(#185697),#185724,.T.); +#185697 = FACE_BOUND('',#185698,.F.); +#185698 = EDGE_LOOP('',(#185699,#185700,#185709,#185717)); +#185699 = ORIENTED_EDGE('',*,*,#185678,.T.); +#185700 = ORIENTED_EDGE('',*,*,#185701,.T.); +#185701 = EDGE_CURVE('',#185671,#185702,#185704,.T.); +#185702 = VERTEX_POINT('',#185703); +#185703 = CARTESIAN_POINT('',(127.901429,-74.06093,-3.5E-02)); +#185704 = CIRCLE('',#185705,0.299999820086); +#185705 = AXIS2_PLACEMENT_3D('',#185706,#185707,#185708); +#185706 = CARTESIAN_POINT('',(127.62426522816,-74.17573477183,-3.5E-02) + ); +#185707 = DIRECTION('',(0.,0.,-1.)); +#185708 = DIRECTION('',(-0.130527505505,-0.991444688476,-0.)); +#185709 = ORIENTED_EDGE('',*,*,#185710,.F.); +#185710 = EDGE_CURVE('',#185711,#185702,#185713,.T.); +#185711 = VERTEX_POINT('',#185712); +#185712 = CARTESIAN_POINT('',(127.901429,-74.06093,0.)); +#185713 = LINE('',#185714,#185715); +#185714 = CARTESIAN_POINT('',(127.901429,-74.06093,0.)); +#185715 = VECTOR('',#185716,1.); +#185716 = DIRECTION('',(0.,0.,-1.)); +#185717 = ORIENTED_EDGE('',*,*,#185718,.F.); +#185718 = EDGE_CURVE('',#185679,#185711,#185719,.T.); +#185719 = CIRCLE('',#185720,0.299999820086); +#185720 = AXIS2_PLACEMENT_3D('',#185721,#185722,#185723); +#185721 = CARTESIAN_POINT('',(127.62426522816,-74.17573477183,0.)); +#185722 = DIRECTION('',(0.,0.,-1.)); +#185723 = DIRECTION('',(-0.130527505505,-0.991444688476,-0.)); +#185724 = CYLINDRICAL_SURFACE('',#185725,0.299999820086); +#185725 = AXIS2_PLACEMENT_3D('',#185726,#185727,#185728); +#185726 = CARTESIAN_POINT('',(127.62426522816,-74.17573477183,0.)); +#185727 = DIRECTION('',(-0.,-0.,1.)); +#185728 = DIRECTION('',(-0.130527505505,-0.991444688476,-0.)); +#185729 = ADVANCED_FACE('',(#185730),#185746,.F.); +#185730 = FACE_BOUND('',#185731,.F.); +#185731 = EDGE_LOOP('',(#185732,#185733,#185739,#185740)); +#185732 = ORIENTED_EDGE('',*,*,#185710,.T.); +#185733 = ORIENTED_EDGE('',*,*,#185734,.T.); +#185734 = EDGE_CURVE('',#185702,#185411,#185735,.T.); +#185735 = LINE('',#185736,#185737); +#185736 = CARTESIAN_POINT('',(127.901429,-74.06093,-3.5E-02)); +#185737 = VECTOR('',#185738,1.); +#185738 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#185739 = ORIENTED_EDGE('',*,*,#185408,.F.); +#185740 = ORIENTED_EDGE('',*,*,#185741,.F.); +#185741 = EDGE_CURVE('',#185711,#185409,#185742,.T.); +#185742 = LINE('',#185743,#185744); +#185743 = CARTESIAN_POINT('',(127.901429,-74.06093,0.)); +#185744 = VECTOR('',#185745,1.); +#185745 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#185746 = PLANE('',#185747); +#185747 = AXIS2_PLACEMENT_3D('',#185748,#185749,#185750); +#185748 = CARTESIAN_POINT('',(127.901429,-74.06093,0.)); +#185749 = DIRECTION('',(-0.965925627198,-0.258819788119,-0.)); +#185750 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#185751 = ADVANCED_FACE('',(#185752),#185779,.F.); +#185752 = FACE_BOUND('',#185753,.F.); +#185753 = EDGE_LOOP('',(#185754,#185764,#185771,#185772)); +#185754 = ORIENTED_EDGE('',*,*,#185755,.T.); +#185755 = EDGE_CURVE('',#185756,#185758,#185760,.T.); +#185756 = VERTEX_POINT('',#185757); +#185757 = CARTESIAN_POINT('',(131.087255,-77.2,0.)); +#185758 = VERTEX_POINT('',#185759); +#185759 = CARTESIAN_POINT('',(131.087255,-77.2,-3.5E-02)); +#185760 = LINE('',#185761,#185762); +#185761 = CARTESIAN_POINT('',(131.087255,-77.2,0.)); +#185762 = VECTOR('',#185763,1.); +#185763 = DIRECTION('',(0.,0.,-1.)); +#185764 = ORIENTED_EDGE('',*,*,#185765,.T.); +#185765 = EDGE_CURVE('',#185758,#185758,#185766,.T.); +#185766 = CIRCLE('',#185767,0.137255); +#185767 = AXIS2_PLACEMENT_3D('',#185768,#185769,#185770); +#185768 = CARTESIAN_POINT('',(130.95,-77.2,-3.5E-02)); +#185769 = DIRECTION('',(0.,0.,1.)); +#185770 = DIRECTION('',(1.,0.,-0.)); +#185771 = ORIENTED_EDGE('',*,*,#185755,.F.); +#185772 = ORIENTED_EDGE('',*,*,#185773,.F.); +#185773 = EDGE_CURVE('',#185756,#185756,#185774,.T.); +#185774 = CIRCLE('',#185775,0.137255); +#185775 = AXIS2_PLACEMENT_3D('',#185776,#185777,#185778); +#185776 = CARTESIAN_POINT('',(130.95,-77.2,0.)); +#185777 = DIRECTION('',(0.,0.,1.)); +#185778 = DIRECTION('',(1.,0.,-0.)); +#185779 = CYLINDRICAL_SURFACE('',#185780,0.137255); +#185780 = AXIS2_PLACEMENT_3D('',#185781,#185782,#185783); +#185781 = CARTESIAN_POINT('',(130.95,-77.2,0.)); +#185782 = DIRECTION('',(0.,0.,1.)); +#185783 = DIRECTION('',(1.,0.,-0.)); +#185784 = ADVANCED_FACE('',(#185785),#185812,.F.); +#185785 = FACE_BOUND('',#185786,.F.); +#185786 = EDGE_LOOP('',(#185787,#185797,#185804,#185805)); +#185787 = ORIENTED_EDGE('',*,*,#185788,.T.); +#185788 = EDGE_CURVE('',#185789,#185791,#185793,.T.); +#185789 = VERTEX_POINT('',#185790); +#185790 = CARTESIAN_POINT('',(127.76152,-74.175735,0.)); +#185791 = VERTEX_POINT('',#185792); +#185792 = CARTESIAN_POINT('',(127.76152,-74.175735,-3.5E-02)); +#185793 = LINE('',#185794,#185795); +#185794 = CARTESIAN_POINT('',(127.76152,-74.175735,0.)); +#185795 = VECTOR('',#185796,1.); +#185796 = DIRECTION('',(0.,0.,-1.)); +#185797 = ORIENTED_EDGE('',*,*,#185798,.T.); +#185798 = EDGE_CURVE('',#185791,#185791,#185799,.T.); +#185799 = CIRCLE('',#185800,0.137255); +#185800 = AXIS2_PLACEMENT_3D('',#185801,#185802,#185803); +#185801 = CARTESIAN_POINT('',(127.624265,-74.175735,-3.5E-02)); +#185802 = DIRECTION('',(0.,0.,1.)); +#185803 = DIRECTION('',(1.,0.,-0.)); +#185804 = ORIENTED_EDGE('',*,*,#185788,.F.); +#185805 = ORIENTED_EDGE('',*,*,#185806,.F.); +#185806 = EDGE_CURVE('',#185789,#185789,#185807,.T.); +#185807 = CIRCLE('',#185808,0.137255); +#185808 = AXIS2_PLACEMENT_3D('',#185809,#185810,#185811); +#185809 = CARTESIAN_POINT('',(127.624265,-74.175735,0.)); +#185810 = DIRECTION('',(0.,0.,1.)); +#185811 = DIRECTION('',(1.,0.,-0.)); +#185812 = CYLINDRICAL_SURFACE('',#185813,0.137255); +#185813 = AXIS2_PLACEMENT_3D('',#185814,#185815,#185816); +#185814 = CARTESIAN_POINT('',(127.624265,-74.175735,0.)); +#185815 = DIRECTION('',(0.,0.,1.)); +#185816 = DIRECTION('',(1.,0.,-0.)); +#185817 = ADVANCED_FACE('',(#185818,#185831,#185834),#185837,.F.); +#185818 = FACE_BOUND('',#185819,.F.); +#185819 = EDGE_LOOP('',(#185820,#185821,#185822,#185823,#185824,#185825, + #185826,#185827,#185828,#185829,#185830)); +#185820 = ORIENTED_EDGE('',*,*,#185434,.T.); +#185821 = ORIENTED_EDGE('',*,*,#185465,.T.); +#185822 = ORIENTED_EDGE('',*,*,#185496,.T.); +#185823 = ORIENTED_EDGE('',*,*,#185527,.T.); +#185824 = ORIENTED_EDGE('',*,*,#185559,.T.); +#185825 = ORIENTED_EDGE('',*,*,#185591,.T.); +#185826 = ORIENTED_EDGE('',*,*,#185622,.T.); +#185827 = ORIENTED_EDGE('',*,*,#185654,.T.); +#185828 = ORIENTED_EDGE('',*,*,#185686,.T.); +#185829 = ORIENTED_EDGE('',*,*,#185718,.T.); +#185830 = ORIENTED_EDGE('',*,*,#185741,.T.); +#185831 = FACE_BOUND('',#185832,.F.); +#185832 = EDGE_LOOP('',(#185833)); +#185833 = ORIENTED_EDGE('',*,*,#185773,.T.); +#185834 = FACE_BOUND('',#185835,.F.); +#185835 = EDGE_LOOP('',(#185836)); +#185836 = ORIENTED_EDGE('',*,*,#185806,.T.); +#185837 = PLANE('',#185838); +#185838 = AXIS2_PLACEMENT_3D('',#185839,#185840,#185841); +#185839 = CARTESIAN_POINT('',(0.,0.,0.)); +#185840 = DIRECTION('',(-0.,-0.,-1.)); +#185841 = DIRECTION('',(-1.,0.,0.)); +#185842 = ADVANCED_FACE('',(#185843,#185856,#185859),#185862,.T.); +#185843 = FACE_BOUND('',#185844,.T.); +#185844 = EDGE_LOOP('',(#185845,#185846,#185847,#185848,#185849,#185850, + #185851,#185852,#185853,#185854,#185855)); +#185845 = ORIENTED_EDGE('',*,*,#185418,.T.); +#185846 = ORIENTED_EDGE('',*,*,#185449,.T.); +#185847 = ORIENTED_EDGE('',*,*,#185480,.T.); +#185848 = ORIENTED_EDGE('',*,*,#185511,.T.); +#185849 = ORIENTED_EDGE('',*,*,#185542,.T.); +#185850 = ORIENTED_EDGE('',*,*,#185575,.T.); +#185851 = ORIENTED_EDGE('',*,*,#185606,.T.); +#185852 = ORIENTED_EDGE('',*,*,#185637,.T.); +#185853 = ORIENTED_EDGE('',*,*,#185670,.T.); +#185854 = ORIENTED_EDGE('',*,*,#185701,.T.); +#185855 = ORIENTED_EDGE('',*,*,#185734,.T.); +#185856 = FACE_BOUND('',#185857,.T.); +#185857 = EDGE_LOOP('',(#185858)); +#185858 = ORIENTED_EDGE('',*,*,#185765,.T.); +#185859 = FACE_BOUND('',#185860,.T.); +#185860 = EDGE_LOOP('',(#185861)); +#185861 = ORIENTED_EDGE('',*,*,#185798,.T.); +#185862 = PLANE('',#185863); +#185863 = AXIS2_PLACEMENT_3D('',#185864,#185865,#185866); +#185864 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#185865 = DIRECTION('',(-0.,-0.,-1.)); +#185866 = DIRECTION('',(-1.,0.,0.)); +#185867 = MANIFOLD_SOLID_BREP('',#185868); +#185868 = CLOSED_SHELL('',(#185869,#185909,#185940,#185971,#186004, + #186035,#186066,#186097,#186128,#186159,#186190,#186221,#186252, + #186285,#186316,#186347,#186378,#186409,#186440,#186471,#186502, + #186535,#186566,#186597,#186630,#186661,#186692,#186723,#186754, + #186785,#186816,#186847,#186878,#186909,#186942,#186964,#186997, + #187043)); +#185869 = ADVANCED_FACE('',(#185870),#185904,.T.); +#185870 = FACE_BOUND('',#185871,.T.); +#185871 = EDGE_LOOP('',(#185872,#185882,#185890,#185898)); +#185872 = ORIENTED_EDGE('',*,*,#185873,.T.); +#185873 = EDGE_CURVE('',#185874,#185876,#185878,.T.); +#185874 = VERTEX_POINT('',#185875); +#185875 = CARTESIAN_POINT('',(133.068869,-76.45,1.51)); +#185876 = VERTEX_POINT('',#185877); +#185877 = CARTESIAN_POINT('',(133.068869,-76.45,1.545)); +#185878 = LINE('',#185879,#185880); +#185879 = CARTESIAN_POINT('',(133.068869,-76.45,1.51)); +#185880 = VECTOR('',#185881,1.); +#185881 = DIRECTION('',(0.,0.,1.)); +#185882 = ORIENTED_EDGE('',*,*,#185883,.T.); +#185883 = EDGE_CURVE('',#185876,#185884,#185886,.T.); +#185884 = VERTEX_POINT('',#185885); +#185885 = CARTESIAN_POINT('',(130.491422,-76.45,1.545)); +#185886 = LINE('',#185887,#185888); +#185887 = CARTESIAN_POINT('',(133.068869,-76.45,1.545)); +#185888 = VECTOR('',#185889,1.); +#185889 = DIRECTION('',(-1.,0.,0.)); +#185890 = ORIENTED_EDGE('',*,*,#185891,.F.); +#185891 = EDGE_CURVE('',#185892,#185884,#185894,.T.); +#185892 = VERTEX_POINT('',#185893); +#185893 = CARTESIAN_POINT('',(130.491422,-76.45,1.51)); +#185894 = LINE('',#185895,#185896); +#185895 = CARTESIAN_POINT('',(130.491422,-76.45,1.51)); +#185896 = VECTOR('',#185897,1.); +#185897 = DIRECTION('',(0.,0.,1.)); +#185898 = ORIENTED_EDGE('',*,*,#185899,.F.); +#185899 = EDGE_CURVE('',#185874,#185892,#185900,.T.); +#185900 = LINE('',#185901,#185902); +#185901 = CARTESIAN_POINT('',(133.068869,-76.45,1.51)); +#185902 = VECTOR('',#185903,1.); +#185903 = DIRECTION('',(-1.,0.,0.)); +#185904 = PLANE('',#185905); +#185905 = AXIS2_PLACEMENT_3D('',#185906,#185907,#185908); +#185906 = CARTESIAN_POINT('',(133.068869,-76.45,1.51)); +#185907 = DIRECTION('',(0.,-1.,0.)); +#185908 = DIRECTION('',(-1.,0.,0.)); +#185909 = ADVANCED_FACE('',(#185910),#185935,.T.); +#185910 = FACE_BOUND('',#185911,.T.); +#185911 = EDGE_LOOP('',(#185912,#185913,#185921,#185929)); +#185912 = ORIENTED_EDGE('',*,*,#185891,.T.); +#185913 = ORIENTED_EDGE('',*,*,#185914,.T.); +#185914 = EDGE_CURVE('',#185884,#185915,#185917,.T.); +#185915 = VERTEX_POINT('',#185916); +#185916 = CARTESIAN_POINT('',(130.4,-76.541422,1.545)); +#185917 = LINE('',#185918,#185919); +#185918 = CARTESIAN_POINT('',(130.491422,-76.45,1.545)); +#185919 = VECTOR('',#185920,1.); +#185920 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#185921 = ORIENTED_EDGE('',*,*,#185922,.F.); +#185922 = EDGE_CURVE('',#185923,#185915,#185925,.T.); +#185923 = VERTEX_POINT('',#185924); +#185924 = CARTESIAN_POINT('',(130.4,-76.541422,1.51)); +#185925 = LINE('',#185926,#185927); +#185926 = CARTESIAN_POINT('',(130.4,-76.541422,1.51)); +#185927 = VECTOR('',#185928,1.); +#185928 = DIRECTION('',(0.,0.,1.)); +#185929 = ORIENTED_EDGE('',*,*,#185930,.F.); +#185930 = EDGE_CURVE('',#185892,#185923,#185931,.T.); +#185931 = LINE('',#185932,#185933); +#185932 = CARTESIAN_POINT('',(130.491422,-76.45,1.51)); +#185933 = VECTOR('',#185934,1.); +#185934 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#185935 = PLANE('',#185936); +#185936 = AXIS2_PLACEMENT_3D('',#185937,#185938,#185939); +#185937 = CARTESIAN_POINT('',(130.491422,-76.45,1.51)); +#185938 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#185939 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#185940 = ADVANCED_FACE('',(#185941),#185966,.T.); +#185941 = FACE_BOUND('',#185942,.T.); +#185942 = EDGE_LOOP('',(#185943,#185944,#185952,#185960)); +#185943 = ORIENTED_EDGE('',*,*,#185922,.T.); +#185944 = ORIENTED_EDGE('',*,*,#185945,.T.); +#185945 = EDGE_CURVE('',#185915,#185946,#185948,.T.); +#185946 = VERTEX_POINT('',#185947); +#185947 = CARTESIAN_POINT('',(130.398079,-78.539509,1.545)); +#185948 = LINE('',#185949,#185950); +#185949 = CARTESIAN_POINT('',(130.4,-76.541422,1.545)); +#185950 = VECTOR('',#185951,1.); +#185951 = DIRECTION('',(-9.614191535173E-04,-0.999999537836,0.)); +#185952 = ORIENTED_EDGE('',*,*,#185953,.F.); +#185953 = EDGE_CURVE('',#185954,#185946,#185956,.T.); +#185954 = VERTEX_POINT('',#185955); +#185955 = CARTESIAN_POINT('',(130.398079,-78.539509,1.51)); +#185956 = LINE('',#185957,#185958); +#185957 = CARTESIAN_POINT('',(130.398079,-78.539509,1.51)); +#185958 = VECTOR('',#185959,1.); +#185959 = DIRECTION('',(0.,0.,1.)); +#185960 = ORIENTED_EDGE('',*,*,#185961,.F.); +#185961 = EDGE_CURVE('',#185923,#185954,#185962,.T.); +#185962 = LINE('',#185963,#185964); +#185963 = CARTESIAN_POINT('',(130.4,-76.541422,1.51)); +#185964 = VECTOR('',#185965,1.); +#185965 = DIRECTION('',(-9.614191535173E-04,-0.999999537836,0.)); +#185966 = PLANE('',#185967); +#185967 = AXIS2_PLACEMENT_3D('',#185968,#185969,#185970); +#185968 = CARTESIAN_POINT('',(130.4,-76.541422,1.51)); +#185969 = DIRECTION('',(0.999999537836,-9.614191535173E-04,0.)); +#185970 = DIRECTION('',(-9.614191535173E-04,-0.999999537836,0.)); +#185971 = ADVANCED_FACE('',(#185972),#185999,.T.); +#185972 = FACE_BOUND('',#185973,.T.); +#185973 = EDGE_LOOP('',(#185974,#185975,#185984,#185992)); +#185974 = ORIENTED_EDGE('',*,*,#185953,.T.); +#185975 = ORIENTED_EDGE('',*,*,#185976,.T.); +#185976 = EDGE_CURVE('',#185946,#185977,#185979,.T.); +#185977 = VERTEX_POINT('',#185978); +#185978 = CARTESIAN_POINT('',(130.219509,-78.718079,1.545)); +#185979 = CIRCLE('',#185980,0.283526309263); +#185980 = AXIS2_PLACEMENT_3D('',#185981,#185982,#185983); +#185981 = CARTESIAN_POINT('',(130.12928975827,-78.44928975827,1.545)); +#185982 = DIRECTION('',(0.,0.,-1.)); +#185983 = DIRECTION('',(0.948022222077,-0.318204127014,0.)); +#185984 = ORIENTED_EDGE('',*,*,#185985,.F.); +#185985 = EDGE_CURVE('',#185986,#185977,#185988,.T.); +#185986 = VERTEX_POINT('',#185987); +#185987 = CARTESIAN_POINT('',(130.219509,-78.718079,1.51)); +#185988 = LINE('',#185989,#185990); +#185989 = CARTESIAN_POINT('',(130.219509,-78.718079,1.51)); +#185990 = VECTOR('',#185991,1.); +#185991 = DIRECTION('',(0.,0.,1.)); +#185992 = ORIENTED_EDGE('',*,*,#185993,.F.); +#185993 = EDGE_CURVE('',#185954,#185986,#185994,.T.); +#185994 = CIRCLE('',#185995,0.283526309263); +#185995 = AXIS2_PLACEMENT_3D('',#185996,#185997,#185998); +#185996 = CARTESIAN_POINT('',(130.12928975827,-78.44928975827,1.51)); +#185997 = DIRECTION('',(0.,0.,-1.)); +#185998 = DIRECTION('',(0.948022222077,-0.318204127014,0.)); +#185999 = CYLINDRICAL_SURFACE('',#186000,0.283526309263); +#186000 = AXIS2_PLACEMENT_3D('',#186001,#186002,#186003); +#186001 = CARTESIAN_POINT('',(130.12928975827,-78.44928975827,1.51)); +#186002 = DIRECTION('',(0.,0.,-1.)); +#186003 = DIRECTION('',(0.948022222077,-0.318204127014,0.)); +#186004 = ADVANCED_FACE('',(#186005),#186030,.T.); +#186005 = FACE_BOUND('',#186006,.T.); +#186006 = EDGE_LOOP('',(#186007,#186008,#186016,#186024)); +#186007 = ORIENTED_EDGE('',*,*,#185985,.T.); +#186008 = ORIENTED_EDGE('',*,*,#186009,.T.); +#186009 = EDGE_CURVE('',#185977,#186010,#186012,.T.); +#186010 = VERTEX_POINT('',#186011); +#186011 = CARTESIAN_POINT('',(127.9,-78.72,1.545)); +#186012 = LINE('',#186013,#186014); +#186013 = CARTESIAN_POINT('',(130.219509,-78.718079,1.545)); +#186014 = VECTOR('',#186015,1.); +#186015 = DIRECTION('',(-0.999999657049,-8.281922342989E-04,0.)); +#186016 = ORIENTED_EDGE('',*,*,#186017,.F.); +#186017 = EDGE_CURVE('',#186018,#186010,#186020,.T.); +#186018 = VERTEX_POINT('',#186019); +#186019 = CARTESIAN_POINT('',(127.9,-78.72,1.51)); +#186020 = LINE('',#186021,#186022); +#186021 = CARTESIAN_POINT('',(127.9,-78.72,1.51)); +#186022 = VECTOR('',#186023,1.); +#186023 = DIRECTION('',(0.,0.,1.)); +#186024 = ORIENTED_EDGE('',*,*,#186025,.F.); +#186025 = EDGE_CURVE('',#185986,#186018,#186026,.T.); +#186026 = LINE('',#186027,#186028); +#186027 = CARTESIAN_POINT('',(130.219509,-78.718079,1.51)); +#186028 = VECTOR('',#186029,1.); +#186029 = DIRECTION('',(-0.999999657049,-8.281922342989E-04,0.)); +#186030 = PLANE('',#186031); +#186031 = AXIS2_PLACEMENT_3D('',#186032,#186033,#186034); +#186032 = CARTESIAN_POINT('',(130.219509,-78.718079,1.51)); +#186033 = DIRECTION('',(8.281922342989E-04,-0.999999657049,0.)); +#186034 = DIRECTION('',(-0.999999657049,-8.281922342989E-04,0.)); +#186035 = ADVANCED_FACE('',(#186036),#186061,.T.); +#186036 = FACE_BOUND('',#186037,.T.); +#186037 = EDGE_LOOP('',(#186038,#186039,#186047,#186055)); +#186038 = ORIENTED_EDGE('',*,*,#186017,.T.); +#186039 = ORIENTED_EDGE('',*,*,#186040,.T.); +#186040 = EDGE_CURVE('',#186010,#186041,#186043,.T.); +#186041 = VERTEX_POINT('',#186042); +#186042 = CARTESIAN_POINT('',(127.898079,-79.829253,1.545)); +#186043 = LINE('',#186044,#186045); +#186044 = CARTESIAN_POINT('',(127.9,-78.72,1.545)); +#186045 = VECTOR('',#186046,1.); +#186046 = DIRECTION('',(-1.731793485674E-03,-0.999998500445,0.)); +#186047 = ORIENTED_EDGE('',*,*,#186048,.F.); +#186048 = EDGE_CURVE('',#186049,#186041,#186051,.T.); +#186049 = VERTEX_POINT('',#186050); +#186050 = CARTESIAN_POINT('',(127.898079,-79.829253,1.51)); +#186051 = LINE('',#186052,#186053); +#186052 = CARTESIAN_POINT('',(127.898079,-79.829253,1.51)); +#186053 = VECTOR('',#186054,1.); +#186054 = DIRECTION('',(0.,0.,1.)); +#186055 = ORIENTED_EDGE('',*,*,#186056,.F.); +#186056 = EDGE_CURVE('',#186018,#186049,#186057,.T.); +#186057 = LINE('',#186058,#186059); +#186058 = CARTESIAN_POINT('',(127.9,-78.72,1.51)); +#186059 = VECTOR('',#186060,1.); +#186060 = DIRECTION('',(-1.731793485674E-03,-0.999998500445,0.)); +#186061 = PLANE('',#186062); +#186062 = AXIS2_PLACEMENT_3D('',#186063,#186064,#186065); +#186063 = CARTESIAN_POINT('',(127.9,-78.72,1.51)); +#186064 = DIRECTION('',(0.999998500445,-1.731793485674E-03,0.)); +#186065 = DIRECTION('',(-1.731793485674E-03,-0.999998500445,0.)); +#186066 = ADVANCED_FACE('',(#186067),#186092,.T.); +#186067 = FACE_BOUND('',#186068,.T.); +#186068 = EDGE_LOOP('',(#186069,#186070,#186078,#186086)); +#186069 = ORIENTED_EDGE('',*,*,#186048,.T.); +#186070 = ORIENTED_EDGE('',*,*,#186071,.T.); +#186071 = EDGE_CURVE('',#186041,#186072,#186074,.T.); +#186072 = VERTEX_POINT('',#186073); +#186073 = CARTESIAN_POINT('',(127.883147,-79.865301,1.545)); +#186074 = LINE('',#186075,#186076); +#186075 = CARTESIAN_POINT('',(127.898079,-79.829253,1.545)); +#186076 = VECTOR('',#186077,1.); +#186077 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#186078 = ORIENTED_EDGE('',*,*,#186079,.F.); +#186079 = EDGE_CURVE('',#186080,#186072,#186082,.T.); +#186080 = VERTEX_POINT('',#186081); +#186081 = CARTESIAN_POINT('',(127.883147,-79.865301,1.51)); +#186082 = LINE('',#186083,#186084); +#186083 = CARTESIAN_POINT('',(127.883147,-79.865301,1.51)); +#186084 = VECTOR('',#186085,1.); +#186085 = DIRECTION('',(0.,0.,1.)); +#186086 = ORIENTED_EDGE('',*,*,#186087,.F.); +#186087 = EDGE_CURVE('',#186049,#186080,#186088,.T.); +#186088 = LINE('',#186089,#186090); +#186089 = CARTESIAN_POINT('',(127.898079,-79.829253,1.51)); +#186090 = VECTOR('',#186091,1.); +#186091 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#186092 = PLANE('',#186093); +#186093 = AXIS2_PLACEMENT_3D('',#186094,#186095,#186096); +#186094 = CARTESIAN_POINT('',(127.898079,-79.829253,1.51)); +#186095 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#186096 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#186097 = ADVANCED_FACE('',(#186098),#186123,.T.); +#186098 = FACE_BOUND('',#186099,.T.); +#186099 = EDGE_LOOP('',(#186100,#186101,#186109,#186117)); +#186100 = ORIENTED_EDGE('',*,*,#186079,.T.); +#186101 = ORIENTED_EDGE('',*,*,#186102,.T.); +#186102 = EDGE_CURVE('',#186072,#186103,#186105,.T.); +#186103 = VERTEX_POINT('',#186104); +#186104 = CARTESIAN_POINT('',(125.940301,-81.808147,1.545)); +#186105 = LINE('',#186106,#186107); +#186106 = CARTESIAN_POINT('',(127.883147,-79.865301,1.545)); +#186107 = VECTOR('',#186108,1.); +#186108 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186109 = ORIENTED_EDGE('',*,*,#186110,.F.); +#186110 = EDGE_CURVE('',#186111,#186103,#186113,.T.); +#186111 = VERTEX_POINT('',#186112); +#186112 = CARTESIAN_POINT('',(125.940301,-81.808147,1.51)); +#186113 = LINE('',#186114,#186115); +#186114 = CARTESIAN_POINT('',(125.940301,-81.808147,1.51)); +#186115 = VECTOR('',#186116,1.); +#186116 = DIRECTION('',(0.,0.,1.)); +#186117 = ORIENTED_EDGE('',*,*,#186118,.F.); +#186118 = EDGE_CURVE('',#186080,#186111,#186119,.T.); +#186119 = LINE('',#186120,#186121); +#186120 = CARTESIAN_POINT('',(127.883147,-79.865301,1.51)); +#186121 = VECTOR('',#186122,1.); +#186122 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186123 = PLANE('',#186124); +#186124 = AXIS2_PLACEMENT_3D('',#186125,#186126,#186127); +#186125 = CARTESIAN_POINT('',(127.883147,-79.865301,1.51)); +#186126 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#186127 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186128 = ADVANCED_FACE('',(#186129),#186154,.T.); +#186129 = FACE_BOUND('',#186130,.T.); +#186130 = EDGE_LOOP('',(#186131,#186132,#186140,#186148)); +#186131 = ORIENTED_EDGE('',*,*,#186110,.T.); +#186132 = ORIENTED_EDGE('',*,*,#186133,.T.); +#186133 = EDGE_CURVE('',#186103,#186134,#186136,.T.); +#186134 = VERTEX_POINT('',#186135); +#186135 = CARTESIAN_POINT('',(125.904253,-81.823079,1.545)); +#186136 = LINE('',#186137,#186138); +#186137 = CARTESIAN_POINT('',(125.940301,-81.808147,1.545)); +#186138 = VECTOR('',#186139,1.); +#186139 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#186140 = ORIENTED_EDGE('',*,*,#186141,.F.); +#186141 = EDGE_CURVE('',#186142,#186134,#186144,.T.); +#186142 = VERTEX_POINT('',#186143); +#186143 = CARTESIAN_POINT('',(125.904253,-81.823079,1.51)); +#186144 = LINE('',#186145,#186146); +#186145 = CARTESIAN_POINT('',(125.904253,-81.823079,1.51)); +#186146 = VECTOR('',#186147,1.); +#186147 = DIRECTION('',(0.,0.,1.)); +#186148 = ORIENTED_EDGE('',*,*,#186149,.F.); +#186149 = EDGE_CURVE('',#186111,#186142,#186150,.T.); +#186150 = LINE('',#186151,#186152); +#186151 = CARTESIAN_POINT('',(125.940301,-81.808147,1.51)); +#186152 = VECTOR('',#186153,1.); +#186153 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#186154 = PLANE('',#186155); +#186155 = AXIS2_PLACEMENT_3D('',#186156,#186157,#186158); +#186156 = CARTESIAN_POINT('',(125.940301,-81.808147,1.51)); +#186157 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#186158 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#186159 = ADVANCED_FACE('',(#186160),#186185,.T.); +#186160 = FACE_BOUND('',#186161,.T.); +#186161 = EDGE_LOOP('',(#186162,#186163,#186171,#186179)); +#186162 = ORIENTED_EDGE('',*,*,#186141,.T.); +#186163 = ORIENTED_EDGE('',*,*,#186164,.T.); +#186164 = EDGE_CURVE('',#186134,#186165,#186167,.T.); +#186165 = VERTEX_POINT('',#186166); +#186166 = CARTESIAN_POINT('',(124.300869,-81.825,1.545)); +#186167 = LINE('',#186168,#186169); +#186168 = CARTESIAN_POINT('',(125.904253,-81.823079,1.545)); +#186169 = VECTOR('',#186170,1.); +#186170 = DIRECTION('',(-0.99999928229,-1.198090177571E-03,0.)); +#186171 = ORIENTED_EDGE('',*,*,#186172,.F.); +#186172 = EDGE_CURVE('',#186173,#186165,#186175,.T.); +#186173 = VERTEX_POINT('',#186174); +#186174 = CARTESIAN_POINT('',(124.300869,-81.825,1.51)); +#186175 = LINE('',#186176,#186177); +#186176 = CARTESIAN_POINT('',(124.300869,-81.825,1.51)); +#186177 = VECTOR('',#186178,1.); +#186178 = DIRECTION('',(0.,0.,1.)); +#186179 = ORIENTED_EDGE('',*,*,#186180,.F.); +#186180 = EDGE_CURVE('',#186142,#186173,#186181,.T.); +#186181 = LINE('',#186182,#186183); +#186182 = CARTESIAN_POINT('',(125.904253,-81.823079,1.51)); +#186183 = VECTOR('',#186184,1.); +#186184 = DIRECTION('',(-0.99999928229,-1.198090177571E-03,0.)); +#186185 = PLANE('',#186186); +#186186 = AXIS2_PLACEMENT_3D('',#186187,#186188,#186189); +#186187 = CARTESIAN_POINT('',(125.904253,-81.823079,1.51)); +#186188 = DIRECTION('',(1.198090177571E-03,-0.99999928229,0.)); +#186189 = DIRECTION('',(-0.99999928229,-1.198090177571E-03,0.)); +#186190 = ADVANCED_FACE('',(#186191),#186216,.T.); +#186191 = FACE_BOUND('',#186192,.T.); +#186192 = EDGE_LOOP('',(#186193,#186194,#186202,#186210)); +#186193 = ORIENTED_EDGE('',*,*,#186172,.T.); +#186194 = ORIENTED_EDGE('',*,*,#186195,.T.); +#186195 = EDGE_CURVE('',#186165,#186196,#186198,.T.); +#186196 = VERTEX_POINT('',#186197); +#186197 = CARTESIAN_POINT('',(123.7,-82.425869,1.545)); +#186198 = LINE('',#186199,#186200); +#186199 = CARTESIAN_POINT('',(124.300869,-81.825,1.545)); +#186200 = VECTOR('',#186201,1.); +#186201 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186202 = ORIENTED_EDGE('',*,*,#186203,.F.); +#186203 = EDGE_CURVE('',#186204,#186196,#186206,.T.); +#186204 = VERTEX_POINT('',#186205); +#186205 = CARTESIAN_POINT('',(123.7,-82.425869,1.51)); +#186206 = LINE('',#186207,#186208); +#186207 = CARTESIAN_POINT('',(123.7,-82.425869,1.51)); +#186208 = VECTOR('',#186209,1.); +#186209 = DIRECTION('',(0.,0.,1.)); +#186210 = ORIENTED_EDGE('',*,*,#186211,.F.); +#186211 = EDGE_CURVE('',#186173,#186204,#186212,.T.); +#186212 = LINE('',#186213,#186214); +#186213 = CARTESIAN_POINT('',(124.300869,-81.825,1.51)); +#186214 = VECTOR('',#186215,1.); +#186215 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186216 = PLANE('',#186217); +#186217 = AXIS2_PLACEMENT_3D('',#186218,#186219,#186220); +#186218 = CARTESIAN_POINT('',(124.300869,-81.825,1.51)); +#186219 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#186220 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#186221 = ADVANCED_FACE('',(#186222),#186247,.T.); +#186222 = FACE_BOUND('',#186223,.T.); +#186223 = EDGE_LOOP('',(#186224,#186225,#186233,#186241)); +#186224 = ORIENTED_EDGE('',*,*,#186203,.T.); +#186225 = ORIENTED_EDGE('',*,*,#186226,.T.); +#186226 = EDGE_CURVE('',#186196,#186227,#186229,.T.); +#186227 = VERTEX_POINT('',#186228); +#186228 = CARTESIAN_POINT('',(123.698079,-82.819509,1.545)); +#186229 = LINE('',#186230,#186231); +#186230 = CARTESIAN_POINT('',(123.7,-82.425869,1.545)); +#186231 = VECTOR('',#186232,1.); +#186232 = DIRECTION('',(-4.880035376986E-03,-0.999988092556,0.)); +#186233 = ORIENTED_EDGE('',*,*,#186234,.F.); +#186234 = EDGE_CURVE('',#186235,#186227,#186237,.T.); +#186235 = VERTEX_POINT('',#186236); +#186236 = CARTESIAN_POINT('',(123.698079,-82.819509,1.51)); +#186237 = LINE('',#186238,#186239); +#186238 = CARTESIAN_POINT('',(123.698079,-82.819509,1.51)); +#186239 = VECTOR('',#186240,1.); +#186240 = DIRECTION('',(0.,0.,1.)); +#186241 = ORIENTED_EDGE('',*,*,#186242,.F.); +#186242 = EDGE_CURVE('',#186204,#186235,#186243,.T.); +#186243 = LINE('',#186244,#186245); +#186244 = CARTESIAN_POINT('',(123.7,-82.425869,1.51)); +#186245 = VECTOR('',#186246,1.); +#186246 = DIRECTION('',(-4.880035376986E-03,-0.999988092556,0.)); +#186247 = PLANE('',#186248); +#186248 = AXIS2_PLACEMENT_3D('',#186249,#186250,#186251); +#186249 = CARTESIAN_POINT('',(123.7,-82.425869,1.51)); +#186250 = DIRECTION('',(0.999988092556,-4.880035376986E-03,0.)); +#186251 = DIRECTION('',(-4.880035376986E-03,-0.999988092556,0.)); +#186252 = ADVANCED_FACE('',(#186253),#186280,.T.); +#186253 = FACE_BOUND('',#186254,.T.); +#186254 = EDGE_LOOP('',(#186255,#186256,#186265,#186273)); +#186255 = ORIENTED_EDGE('',*,*,#186234,.T.); +#186256 = ORIENTED_EDGE('',*,*,#186257,.T.); +#186257 = EDGE_CURVE('',#186227,#186258,#186260,.T.); +#186258 = VERTEX_POINT('',#186259); +#186259 = CARTESIAN_POINT('',(123.501921,-82.819509,1.545)); +#186260 = CIRCLE('',#186261,0.100000456609); +#186261 = AXIS2_PLACEMENT_3D('',#186262,#186263,#186264); +#186262 = CARTESIAN_POINT('',(123.6,-82.8,1.545)); +#186263 = DIRECTION('',(-0.,0.,-1.)); +#186264 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#186265 = ORIENTED_EDGE('',*,*,#186266,.F.); +#186266 = EDGE_CURVE('',#186267,#186258,#186269,.T.); +#186267 = VERTEX_POINT('',#186268); +#186268 = CARTESIAN_POINT('',(123.501921,-82.819509,1.51)); +#186269 = LINE('',#186270,#186271); +#186270 = CARTESIAN_POINT('',(123.501921,-82.819509,1.51)); +#186271 = VECTOR('',#186272,1.); +#186272 = DIRECTION('',(0.,0.,1.)); +#186273 = ORIENTED_EDGE('',*,*,#186274,.F.); +#186274 = EDGE_CURVE('',#186235,#186267,#186275,.T.); +#186275 = CIRCLE('',#186276,0.100000456609); +#186276 = AXIS2_PLACEMENT_3D('',#186277,#186278,#186279); +#186277 = CARTESIAN_POINT('',(123.6,-82.8,1.51)); +#186278 = DIRECTION('',(-0.,0.,-1.)); +#186279 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#186280 = CYLINDRICAL_SURFACE('',#186281,0.100000456609); +#186281 = AXIS2_PLACEMENT_3D('',#186282,#186283,#186284); +#186282 = CARTESIAN_POINT('',(123.6,-82.8,1.51)); +#186283 = DIRECTION('',(-0.,0.,-1.)); +#186284 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#186285 = ADVANCED_FACE('',(#186286),#186311,.T.); +#186286 = FACE_BOUND('',#186287,.T.); +#186287 = EDGE_LOOP('',(#186288,#186289,#186297,#186305)); +#186288 = ORIENTED_EDGE('',*,*,#186266,.T.); +#186289 = ORIENTED_EDGE('',*,*,#186290,.T.); +#186290 = EDGE_CURVE('',#186258,#186291,#186293,.T.); +#186291 = VERTEX_POINT('',#186292); +#186292 = CARTESIAN_POINT('',(123.501921,-82.364939,1.545)); +#186293 = LINE('',#186294,#186295); +#186294 = CARTESIAN_POINT('',(123.501921,-82.819509,1.545)); +#186295 = VECTOR('',#186296,1.); +#186296 = DIRECTION('',(0.,1.,0.)); +#186297 = ORIENTED_EDGE('',*,*,#186298,.F.); +#186298 = EDGE_CURVE('',#186299,#186291,#186301,.T.); +#186299 = VERTEX_POINT('',#186300); +#186300 = CARTESIAN_POINT('',(123.501921,-82.364939,1.51)); +#186301 = LINE('',#186302,#186303); +#186302 = CARTESIAN_POINT('',(123.501921,-82.364939,1.51)); +#186303 = VECTOR('',#186304,1.); +#186304 = DIRECTION('',(0.,0.,1.)); +#186305 = ORIENTED_EDGE('',*,*,#186306,.F.); +#186306 = EDGE_CURVE('',#186267,#186299,#186307,.T.); +#186307 = LINE('',#186308,#186309); +#186308 = CARTESIAN_POINT('',(123.501921,-82.819509,1.51)); +#186309 = VECTOR('',#186310,1.); +#186310 = DIRECTION('',(0.,1.,0.)); +#186311 = PLANE('',#186312); +#186312 = AXIS2_PLACEMENT_3D('',#186313,#186314,#186315); +#186313 = CARTESIAN_POINT('',(123.501921,-82.819509,1.51)); +#186314 = DIRECTION('',(-1.,0.,0.)); +#186315 = DIRECTION('',(0.,1.,0.)); +#186316 = ADVANCED_FACE('',(#186317),#186342,.T.); +#186317 = FACE_BOUND('',#186318,.T.); +#186318 = EDGE_LOOP('',(#186319,#186320,#186328,#186336)); +#186319 = ORIENTED_EDGE('',*,*,#186298,.T.); +#186320 = ORIENTED_EDGE('',*,*,#186321,.T.); +#186321 = EDGE_CURVE('',#186291,#186322,#186324,.T.); +#186322 = VERTEX_POINT('',#186323); +#186323 = CARTESIAN_POINT('',(123.516853,-82.328891,1.545)); +#186324 = LINE('',#186325,#186326); +#186325 = CARTESIAN_POINT('',(123.501921,-82.364939,1.545)); +#186326 = VECTOR('',#186327,1.); +#186327 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186328 = ORIENTED_EDGE('',*,*,#186329,.F.); +#186329 = EDGE_CURVE('',#186330,#186322,#186332,.T.); +#186330 = VERTEX_POINT('',#186331); +#186331 = CARTESIAN_POINT('',(123.516853,-82.328891,1.51)); +#186332 = LINE('',#186333,#186334); +#186333 = CARTESIAN_POINT('',(123.516853,-82.328891,1.51)); +#186334 = VECTOR('',#186335,1.); +#186335 = DIRECTION('',(0.,0.,1.)); +#186336 = ORIENTED_EDGE('',*,*,#186337,.F.); +#186337 = EDGE_CURVE('',#186299,#186330,#186338,.T.); +#186338 = LINE('',#186339,#186340); +#186339 = CARTESIAN_POINT('',(123.501921,-82.364939,1.51)); +#186340 = VECTOR('',#186341,1.); +#186341 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186342 = PLANE('',#186343); +#186343 = AXIS2_PLACEMENT_3D('',#186344,#186345,#186346); +#186344 = CARTESIAN_POINT('',(123.501921,-82.364939,1.51)); +#186345 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#186346 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186347 = ADVANCED_FACE('',(#186348),#186373,.T.); +#186348 = FACE_BOUND('',#186349,.T.); +#186349 = EDGE_LOOP('',(#186350,#186351,#186359,#186367)); +#186350 = ORIENTED_EDGE('',*,*,#186329,.T.); +#186351 = ORIENTED_EDGE('',*,*,#186352,.T.); +#186352 = EDGE_CURVE('',#186322,#186353,#186355,.T.); +#186353 = VERTEX_POINT('',#186354); +#186354 = CARTESIAN_POINT('',(124.20389,-81.641853,1.545)); +#186355 = LINE('',#186356,#186357); +#186356 = CARTESIAN_POINT('',(123.516853,-82.328891,1.545)); +#186357 = VECTOR('',#186358,1.); +#186358 = DIRECTION('',(0.707106266581,0.707107295792,0.)); +#186359 = ORIENTED_EDGE('',*,*,#186360,.F.); +#186360 = EDGE_CURVE('',#186361,#186353,#186363,.T.); +#186361 = VERTEX_POINT('',#186362); +#186362 = CARTESIAN_POINT('',(124.20389,-81.641853,1.51)); +#186363 = LINE('',#186364,#186365); +#186364 = CARTESIAN_POINT('',(124.20389,-81.641853,1.51)); +#186365 = VECTOR('',#186366,1.); +#186366 = DIRECTION('',(0.,0.,1.)); +#186367 = ORIENTED_EDGE('',*,*,#186368,.F.); +#186368 = EDGE_CURVE('',#186330,#186361,#186369,.T.); +#186369 = LINE('',#186370,#186371); +#186370 = CARTESIAN_POINT('',(123.516853,-82.328891,1.51)); +#186371 = VECTOR('',#186372,1.); +#186372 = DIRECTION('',(0.707106266581,0.707107295792,0.)); +#186373 = PLANE('',#186374); +#186374 = AXIS2_PLACEMENT_3D('',#186375,#186376,#186377); +#186375 = CARTESIAN_POINT('',(123.516853,-82.328891,1.51)); +#186376 = DIRECTION('',(-0.707107295792,0.707106266581,0.)); +#186377 = DIRECTION('',(0.707106266581,0.707107295792,0.)); +#186378 = ADVANCED_FACE('',(#186379),#186404,.T.); +#186379 = FACE_BOUND('',#186380,.T.); +#186380 = EDGE_LOOP('',(#186381,#186382,#186390,#186398)); +#186381 = ORIENTED_EDGE('',*,*,#186360,.T.); +#186382 = ORIENTED_EDGE('',*,*,#186383,.T.); +#186383 = EDGE_CURVE('',#186353,#186384,#186386,.T.); +#186384 = VERTEX_POINT('',#186385); +#186385 = CARTESIAN_POINT('',(124.239939,-81.626921,1.545)); +#186386 = LINE('',#186387,#186388); +#186387 = CARTESIAN_POINT('',(124.20389,-81.641853,1.545)); +#186388 = VECTOR('',#186389,1.); +#186389 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#186390 = ORIENTED_EDGE('',*,*,#186391,.F.); +#186391 = EDGE_CURVE('',#186392,#186384,#186394,.T.); +#186392 = VERTEX_POINT('',#186393); +#186393 = CARTESIAN_POINT('',(124.239939,-81.626921,1.51)); +#186394 = LINE('',#186395,#186396); +#186395 = CARTESIAN_POINT('',(124.239939,-81.626921,1.51)); +#186396 = VECTOR('',#186397,1.); +#186397 = DIRECTION('',(0.,0.,1.)); +#186398 = ORIENTED_EDGE('',*,*,#186399,.F.); +#186399 = EDGE_CURVE('',#186361,#186392,#186400,.T.); +#186400 = LINE('',#186401,#186402); +#186401 = CARTESIAN_POINT('',(124.20389,-81.641853,1.51)); +#186402 = VECTOR('',#186403,1.); +#186403 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#186404 = PLANE('',#186405); +#186405 = AXIS2_PLACEMENT_3D('',#186406,#186407,#186408); +#186406 = CARTESIAN_POINT('',(124.20389,-81.641853,1.51)); +#186407 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#186408 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#186409 = ADVANCED_FACE('',(#186410),#186435,.T.); +#186410 = FACE_BOUND('',#186411,.T.); +#186411 = EDGE_LOOP('',(#186412,#186413,#186421,#186429)); +#186412 = ORIENTED_EDGE('',*,*,#186391,.T.); +#186413 = ORIENTED_EDGE('',*,*,#186414,.T.); +#186414 = EDGE_CURVE('',#186384,#186415,#186417,.T.); +#186415 = VERTEX_POINT('',#186416); +#186416 = CARTESIAN_POINT('',(125.843322,-81.625,1.545)); +#186417 = LINE('',#186418,#186419); +#186418 = CARTESIAN_POINT('',(124.239939,-81.626921,1.545)); +#186419 = VECTOR('',#186420,1.); +#186420 = DIRECTION('',(0.999999282289,1.198090924796E-03,0.)); +#186421 = ORIENTED_EDGE('',*,*,#186422,.F.); +#186422 = EDGE_CURVE('',#186423,#186415,#186425,.T.); +#186423 = VERTEX_POINT('',#186424); +#186424 = CARTESIAN_POINT('',(125.843322,-81.625,1.51)); +#186425 = LINE('',#186426,#186427); +#186426 = CARTESIAN_POINT('',(125.843322,-81.625,1.51)); +#186427 = VECTOR('',#186428,1.); +#186428 = DIRECTION('',(0.,0.,1.)); +#186429 = ORIENTED_EDGE('',*,*,#186430,.F.); +#186430 = EDGE_CURVE('',#186392,#186423,#186431,.T.); +#186431 = LINE('',#186432,#186433); +#186432 = CARTESIAN_POINT('',(124.239939,-81.626921,1.51)); +#186433 = VECTOR('',#186434,1.); +#186434 = DIRECTION('',(0.999999282289,1.198090924796E-03,0.)); +#186435 = PLANE('',#186436); +#186436 = AXIS2_PLACEMENT_3D('',#186437,#186438,#186439); +#186437 = CARTESIAN_POINT('',(124.239939,-81.626921,1.51)); +#186438 = DIRECTION('',(-1.198090924796E-03,0.999999282289,0.)); +#186439 = DIRECTION('',(0.999999282289,1.198090924796E-03,0.)); +#186440 = ADVANCED_FACE('',(#186441),#186466,.T.); +#186441 = FACE_BOUND('',#186442,.T.); +#186442 = EDGE_LOOP('',(#186443,#186444,#186452,#186460)); +#186443 = ORIENTED_EDGE('',*,*,#186422,.T.); +#186444 = ORIENTED_EDGE('',*,*,#186445,.T.); +#186445 = EDGE_CURVE('',#186415,#186446,#186448,.T.); +#186446 = VERTEX_POINT('',#186447); +#186447 = CARTESIAN_POINT('',(127.7,-79.768322,1.545)); +#186448 = LINE('',#186449,#186450); +#186449 = CARTESIAN_POINT('',(125.843322,-81.625,1.545)); +#186450 = VECTOR('',#186451,1.); +#186451 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186452 = ORIENTED_EDGE('',*,*,#186453,.F.); +#186453 = EDGE_CURVE('',#186454,#186446,#186456,.T.); +#186454 = VERTEX_POINT('',#186455); +#186455 = CARTESIAN_POINT('',(127.7,-79.768322,1.51)); +#186456 = LINE('',#186457,#186458); +#186457 = CARTESIAN_POINT('',(127.7,-79.768322,1.51)); +#186458 = VECTOR('',#186459,1.); +#186459 = DIRECTION('',(0.,0.,1.)); +#186460 = ORIENTED_EDGE('',*,*,#186461,.F.); +#186461 = EDGE_CURVE('',#186423,#186454,#186462,.T.); +#186462 = LINE('',#186463,#186464); +#186463 = CARTESIAN_POINT('',(125.843322,-81.625,1.51)); +#186464 = VECTOR('',#186465,1.); +#186465 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186466 = PLANE('',#186467); +#186467 = AXIS2_PLACEMENT_3D('',#186468,#186469,#186470); +#186468 = CARTESIAN_POINT('',(125.843322,-81.625,1.51)); +#186469 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#186470 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186471 = ADVANCED_FACE('',(#186472),#186497,.T.); +#186472 = FACE_BOUND('',#186473,.T.); +#186473 = EDGE_LOOP('',(#186474,#186475,#186483,#186491)); +#186474 = ORIENTED_EDGE('',*,*,#186453,.T.); +#186475 = ORIENTED_EDGE('',*,*,#186476,.T.); +#186476 = EDGE_CURVE('',#186446,#186477,#186479,.T.); +#186477 = VERTEX_POINT('',#186478); +#186478 = CARTESIAN_POINT('',(127.701921,-78.600491,1.545)); +#186479 = LINE('',#186480,#186481); +#186480 = CARTESIAN_POINT('',(127.7,-79.768322,1.545)); +#186481 = VECTOR('',#186482,1.); +#186482 = DIRECTION('',(1.644927563223E-03,0.999998647106,0.)); +#186483 = ORIENTED_EDGE('',*,*,#186484,.F.); +#186484 = EDGE_CURVE('',#186485,#186477,#186487,.T.); +#186485 = VERTEX_POINT('',#186486); +#186486 = CARTESIAN_POINT('',(127.701921,-78.600491,1.51)); +#186487 = LINE('',#186488,#186489); +#186488 = CARTESIAN_POINT('',(127.701921,-78.600491,1.51)); +#186489 = VECTOR('',#186490,1.); +#186490 = DIRECTION('',(0.,0.,1.)); +#186491 = ORIENTED_EDGE('',*,*,#186492,.F.); +#186492 = EDGE_CURVE('',#186454,#186485,#186493,.T.); +#186493 = LINE('',#186494,#186495); +#186494 = CARTESIAN_POINT('',(127.7,-79.768322,1.51)); +#186495 = VECTOR('',#186496,1.); +#186496 = DIRECTION('',(1.644927563223E-03,0.999998647106,0.)); +#186497 = PLANE('',#186498); +#186498 = AXIS2_PLACEMENT_3D('',#186499,#186500,#186501); +#186499 = CARTESIAN_POINT('',(127.7,-79.768322,1.51)); +#186500 = DIRECTION('',(-0.999998647106,1.644927563223E-03,0.)); +#186501 = DIRECTION('',(1.644927563223E-03,0.999998647106,0.)); +#186502 = ADVANCED_FACE('',(#186503),#186530,.T.); +#186503 = FACE_BOUND('',#186504,.T.); +#186504 = EDGE_LOOP('',(#186505,#186506,#186515,#186523)); +#186505 = ORIENTED_EDGE('',*,*,#186484,.T.); +#186506 = ORIENTED_EDGE('',*,*,#186507,.T.); +#186507 = EDGE_CURVE('',#186477,#186508,#186510,.T.); +#186508 = VERTEX_POINT('',#186509); +#186509 = CARTESIAN_POINT('',(127.780491,-78.521921,1.545)); +#186510 = CIRCLE('',#186511,0.100002891901); +#186511 = AXIS2_PLACEMENT_3D('',#186512,#186513,#186514); +#186512 = CARTESIAN_POINT('',(127.80000207103,-78.62000207103,1.545)); +#186513 = DIRECTION('',(0.,0.,-1.)); +#186514 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#186515 = ORIENTED_EDGE('',*,*,#186516,.F.); +#186516 = EDGE_CURVE('',#186517,#186508,#186519,.T.); +#186517 = VERTEX_POINT('',#186518); +#186518 = CARTESIAN_POINT('',(127.780491,-78.521921,1.51)); +#186519 = LINE('',#186520,#186521); +#186520 = CARTESIAN_POINT('',(127.780491,-78.521921,1.51)); +#186521 = VECTOR('',#186522,1.); +#186522 = DIRECTION('',(0.,0.,1.)); +#186523 = ORIENTED_EDGE('',*,*,#186524,.F.); +#186524 = EDGE_CURVE('',#186485,#186517,#186525,.T.); +#186525 = CIRCLE('',#186526,0.100002891901); +#186526 = AXIS2_PLACEMENT_3D('',#186527,#186528,#186529); +#186527 = CARTESIAN_POINT('',(127.80000207103,-78.62000207103,1.51)); +#186528 = DIRECTION('',(0.,0.,-1.)); +#186529 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#186530 = CYLINDRICAL_SURFACE('',#186531,0.100002891901); +#186531 = AXIS2_PLACEMENT_3D('',#186532,#186533,#186534); +#186532 = CARTESIAN_POINT('',(127.80000207103,-78.62000207103,1.51)); +#186533 = DIRECTION('',(0.,0.,-1.)); +#186534 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#186535 = ADVANCED_FACE('',(#186536),#186561,.T.); +#186536 = FACE_BOUND('',#186537,.T.); +#186537 = EDGE_LOOP('',(#186538,#186539,#186547,#186555)); +#186538 = ORIENTED_EDGE('',*,*,#186516,.T.); +#186539 = ORIENTED_EDGE('',*,*,#186540,.T.); +#186540 = EDGE_CURVE('',#186508,#186541,#186543,.T.); +#186541 = VERTEX_POINT('',#186542); +#186542 = CARTESIAN_POINT('',(129.131296,-78.52,1.545)); +#186543 = LINE('',#186544,#186545); +#186544 = CARTESIAN_POINT('',(127.780491,-78.521921,1.545)); +#186545 = VECTOR('',#186546,1.); +#186546 = DIRECTION('',(0.999998988796,1.422113523038E-03,0.)); +#186547 = ORIENTED_EDGE('',*,*,#186548,.F.); +#186548 = EDGE_CURVE('',#186549,#186541,#186551,.T.); +#186549 = VERTEX_POINT('',#186550); +#186550 = CARTESIAN_POINT('',(129.131296,-78.52,1.51)); +#186551 = LINE('',#186552,#186553); +#186552 = CARTESIAN_POINT('',(129.131296,-78.52,1.51)); +#186553 = VECTOR('',#186554,1.); +#186554 = DIRECTION('',(0.,0.,1.)); +#186555 = ORIENTED_EDGE('',*,*,#186556,.F.); +#186556 = EDGE_CURVE('',#186517,#186549,#186557,.T.); +#186557 = LINE('',#186558,#186559); +#186558 = CARTESIAN_POINT('',(127.780491,-78.521921,1.51)); +#186559 = VECTOR('',#186560,1.); +#186560 = DIRECTION('',(0.999998988796,1.422113523038E-03,0.)); +#186561 = PLANE('',#186562); +#186562 = AXIS2_PLACEMENT_3D('',#186563,#186564,#186565); +#186563 = CARTESIAN_POINT('',(127.780491,-78.521921,1.51)); +#186564 = DIRECTION('',(-1.422113523038E-03,0.999998988796,0.)); +#186565 = DIRECTION('',(0.999998988796,1.422113523038E-03,0.)); +#186566 = ADVANCED_FACE('',(#186567),#186592,.T.); +#186567 = FACE_BOUND('',#186568,.T.); +#186568 = EDGE_LOOP('',(#186569,#186570,#186578,#186586)); +#186569 = ORIENTED_EDGE('',*,*,#186548,.T.); +#186570 = ORIENTED_EDGE('',*,*,#186571,.T.); +#186571 = EDGE_CURVE('',#186541,#186572,#186574,.T.); +#186572 = VERTEX_POINT('',#186573); +#186573 = CARTESIAN_POINT('',(129.154443,-78.496853,1.545)); +#186574 = LINE('',#186575,#186576); +#186575 = CARTESIAN_POINT('',(129.131296,-78.52,1.545)); +#186576 = VECTOR('',#186577,1.); +#186577 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186578 = ORIENTED_EDGE('',*,*,#186579,.F.); +#186579 = EDGE_CURVE('',#186580,#186572,#186582,.T.); +#186580 = VERTEX_POINT('',#186581); +#186581 = CARTESIAN_POINT('',(129.154443,-78.496853,1.51)); +#186582 = LINE('',#186583,#186584); +#186583 = CARTESIAN_POINT('',(129.154443,-78.496853,1.51)); +#186584 = VECTOR('',#186585,1.); +#186585 = DIRECTION('',(0.,0.,1.)); +#186586 = ORIENTED_EDGE('',*,*,#186587,.F.); +#186587 = EDGE_CURVE('',#186549,#186580,#186588,.T.); +#186588 = LINE('',#186589,#186590); +#186589 = CARTESIAN_POINT('',(129.131296,-78.52,1.51)); +#186590 = VECTOR('',#186591,1.); +#186591 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186592 = PLANE('',#186593); +#186593 = AXIS2_PLACEMENT_3D('',#186594,#186595,#186596); +#186594 = CARTESIAN_POINT('',(129.131296,-78.52,1.51)); +#186595 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#186596 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186597 = ADVANCED_FACE('',(#186598),#186625,.T.); +#186598 = FACE_BOUND('',#186599,.T.); +#186599 = EDGE_LOOP('',(#186600,#186601,#186610,#186618)); +#186600 = ORIENTED_EDGE('',*,*,#186579,.T.); +#186601 = ORIENTED_EDGE('',*,*,#186602,.T.); +#186602 = EDGE_CURVE('',#186572,#186603,#186605,.T.); +#186603 = VERTEX_POINT('',#186604); +#186604 = CARTESIAN_POINT('',(129.265557,-78.496853,1.545)); +#186605 = CIRCLE('',#186606,9.999758414128E-02); +#186606 = AXIS2_PLACEMENT_3D('',#186607,#186608,#186609); +#186607 = CARTESIAN_POINT('',(129.21,-78.57999707125,1.545)); +#186608 = DIRECTION('',(0.,0.,-1.)); +#186609 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#186610 = ORIENTED_EDGE('',*,*,#186611,.F.); +#186611 = EDGE_CURVE('',#186612,#186603,#186614,.T.); +#186612 = VERTEX_POINT('',#186613); +#186613 = CARTESIAN_POINT('',(129.265557,-78.496853,1.51)); +#186614 = LINE('',#186615,#186616); +#186615 = CARTESIAN_POINT('',(129.265557,-78.496853,1.51)); +#186616 = VECTOR('',#186617,1.); +#186617 = DIRECTION('',(0.,0.,1.)); +#186618 = ORIENTED_EDGE('',*,*,#186619,.F.); +#186619 = EDGE_CURVE('',#186580,#186612,#186620,.T.); +#186620 = CIRCLE('',#186621,9.999758414128E-02); +#186621 = AXIS2_PLACEMENT_3D('',#186622,#186623,#186624); +#186622 = CARTESIAN_POINT('',(129.21,-78.57999707125,1.51)); +#186623 = DIRECTION('',(0.,0.,-1.)); +#186624 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#186625 = CYLINDRICAL_SURFACE('',#186626,9.999758414128E-02); +#186626 = AXIS2_PLACEMENT_3D('',#186627,#186628,#186629); +#186627 = CARTESIAN_POINT('',(129.21,-78.57999707125,1.51)); +#186628 = DIRECTION('',(0.,0.,-1.)); +#186629 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#186630 = ADVANCED_FACE('',(#186631),#186656,.T.); +#186631 = FACE_BOUND('',#186632,.T.); +#186632 = EDGE_LOOP('',(#186633,#186634,#186642,#186650)); +#186633 = ORIENTED_EDGE('',*,*,#186611,.T.); +#186634 = ORIENTED_EDGE('',*,*,#186635,.T.); +#186635 = EDGE_CURVE('',#186603,#186636,#186638,.T.); +#186636 = VERTEX_POINT('',#186637); +#186637 = CARTESIAN_POINT('',(129.291422,-78.52,1.545)); +#186638 = LINE('',#186639,#186640); +#186639 = CARTESIAN_POINT('',(129.265557,-78.496853,1.545)); +#186640 = VECTOR('',#186641,1.); +#186641 = DIRECTION('',(0.74517500213,-0.66686896479,0.)); +#186642 = ORIENTED_EDGE('',*,*,#186643,.F.); +#186643 = EDGE_CURVE('',#186644,#186636,#186646,.T.); +#186644 = VERTEX_POINT('',#186645); +#186645 = CARTESIAN_POINT('',(129.291422,-78.52,1.51)); +#186646 = LINE('',#186647,#186648); +#186647 = CARTESIAN_POINT('',(129.291422,-78.52,1.51)); +#186648 = VECTOR('',#186649,1.); +#186649 = DIRECTION('',(0.,0.,1.)); +#186650 = ORIENTED_EDGE('',*,*,#186651,.F.); +#186651 = EDGE_CURVE('',#186612,#186644,#186652,.T.); +#186652 = LINE('',#186653,#186654); +#186653 = CARTESIAN_POINT('',(129.265557,-78.496853,1.51)); +#186654 = VECTOR('',#186655,1.); +#186655 = DIRECTION('',(0.74517500213,-0.66686896479,0.)); +#186656 = PLANE('',#186657); +#186657 = AXIS2_PLACEMENT_3D('',#186658,#186659,#186660); +#186658 = CARTESIAN_POINT('',(129.265557,-78.496853,1.51)); +#186659 = DIRECTION('',(0.66686896479,0.74517500213,-0.)); +#186660 = DIRECTION('',(0.74517500213,-0.66686896479,0.)); +#186661 = ADVANCED_FACE('',(#186662),#186687,.T.); +#186662 = FACE_BOUND('',#186663,.T.); +#186663 = EDGE_LOOP('',(#186664,#186665,#186673,#186681)); +#186664 = ORIENTED_EDGE('',*,*,#186643,.T.); +#186665 = ORIENTED_EDGE('',*,*,#186666,.T.); +#186666 = EDGE_CURVE('',#186636,#186667,#186669,.T.); +#186667 = VERTEX_POINT('',#186668); +#186668 = CARTESIAN_POINT('',(130.158578,-78.52,1.545)); +#186669 = LINE('',#186670,#186671); +#186670 = CARTESIAN_POINT('',(129.291422,-78.52,1.545)); +#186671 = VECTOR('',#186672,1.); +#186672 = DIRECTION('',(1.,0.,0.)); +#186673 = ORIENTED_EDGE('',*,*,#186674,.F.); +#186674 = EDGE_CURVE('',#186675,#186667,#186677,.T.); +#186675 = VERTEX_POINT('',#186676); +#186676 = CARTESIAN_POINT('',(130.158578,-78.52,1.51)); +#186677 = LINE('',#186678,#186679); +#186678 = CARTESIAN_POINT('',(130.158578,-78.52,1.51)); +#186679 = VECTOR('',#186680,1.); +#186680 = DIRECTION('',(0.,0.,1.)); +#186681 = ORIENTED_EDGE('',*,*,#186682,.F.); +#186682 = EDGE_CURVE('',#186644,#186675,#186683,.T.); +#186683 = LINE('',#186684,#186685); +#186684 = CARTESIAN_POINT('',(129.291422,-78.52,1.51)); +#186685 = VECTOR('',#186686,1.); +#186686 = DIRECTION('',(1.,0.,0.)); +#186687 = PLANE('',#186688); +#186688 = AXIS2_PLACEMENT_3D('',#186689,#186690,#186691); +#186689 = CARTESIAN_POINT('',(129.291422,-78.52,1.51)); +#186690 = DIRECTION('',(0.,1.,0.)); +#186691 = DIRECTION('',(1.,0.,0.)); +#186692 = ADVANCED_FACE('',(#186693),#186718,.T.); +#186693 = FACE_BOUND('',#186694,.T.); +#186694 = EDGE_LOOP('',(#186695,#186696,#186704,#186712)); +#186695 = ORIENTED_EDGE('',*,*,#186674,.T.); +#186696 = ORIENTED_EDGE('',*,*,#186697,.T.); +#186697 = EDGE_CURVE('',#186667,#186698,#186700,.T.); +#186698 = VERTEX_POINT('',#186699); +#186699 = CARTESIAN_POINT('',(130.2,-78.478578,1.545)); +#186700 = LINE('',#186701,#186702); +#186701 = CARTESIAN_POINT('',(130.158578,-78.52,1.545)); +#186702 = VECTOR('',#186703,1.); +#186703 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#186704 = ORIENTED_EDGE('',*,*,#186705,.F.); +#186705 = EDGE_CURVE('',#186706,#186698,#186708,.T.); +#186706 = VERTEX_POINT('',#186707); +#186707 = CARTESIAN_POINT('',(130.2,-78.478578,1.51)); +#186708 = LINE('',#186709,#186710); +#186709 = CARTESIAN_POINT('',(130.2,-78.478578,1.51)); +#186710 = VECTOR('',#186711,1.); +#186711 = DIRECTION('',(0.,0.,1.)); +#186712 = ORIENTED_EDGE('',*,*,#186713,.F.); +#186713 = EDGE_CURVE('',#186675,#186706,#186714,.T.); +#186714 = LINE('',#186715,#186716); +#186715 = CARTESIAN_POINT('',(130.158578,-78.52,1.51)); +#186716 = VECTOR('',#186717,1.); +#186717 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#186718 = PLANE('',#186719); +#186719 = AXIS2_PLACEMENT_3D('',#186720,#186721,#186722); +#186720 = CARTESIAN_POINT('',(130.158578,-78.52,1.51)); +#186721 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#186722 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#186723 = ADVANCED_FACE('',(#186724),#186749,.T.); +#186724 = FACE_BOUND('',#186725,.T.); +#186725 = EDGE_LOOP('',(#186726,#186727,#186735,#186743)); +#186726 = ORIENTED_EDGE('',*,*,#186705,.T.); +#186727 = ORIENTED_EDGE('',*,*,#186728,.T.); +#186728 = EDGE_CURVE('',#186698,#186729,#186731,.T.); +#186729 = VERTEX_POINT('',#186730); +#186730 = CARTESIAN_POINT('',(130.201921,-76.480491,1.545)); +#186731 = LINE('',#186732,#186733); +#186732 = CARTESIAN_POINT('',(130.2,-78.478578,1.545)); +#186733 = VECTOR('',#186734,1.); +#186734 = DIRECTION('',(9.614191535173E-04,0.999999537836,0.)); +#186735 = ORIENTED_EDGE('',*,*,#186736,.F.); +#186736 = EDGE_CURVE('',#186737,#186729,#186739,.T.); +#186737 = VERTEX_POINT('',#186738); +#186738 = CARTESIAN_POINT('',(130.201921,-76.480491,1.51)); +#186739 = LINE('',#186740,#186741); +#186740 = CARTESIAN_POINT('',(130.201921,-76.480491,1.51)); +#186741 = VECTOR('',#186742,1.); +#186742 = DIRECTION('',(0.,0.,1.)); +#186743 = ORIENTED_EDGE('',*,*,#186744,.F.); +#186744 = EDGE_CURVE('',#186706,#186737,#186745,.T.); +#186745 = LINE('',#186746,#186747); +#186746 = CARTESIAN_POINT('',(130.2,-78.478578,1.51)); +#186747 = VECTOR('',#186748,1.); +#186748 = DIRECTION('',(9.614191535173E-04,0.999999537836,0.)); +#186749 = PLANE('',#186750); +#186750 = AXIS2_PLACEMENT_3D('',#186751,#186752,#186753); +#186751 = CARTESIAN_POINT('',(130.2,-78.478578,1.51)); +#186752 = DIRECTION('',(-0.999999537836,9.614191535173E-04,0.)); +#186753 = DIRECTION('',(9.614191535173E-04,0.999999537836,0.)); +#186754 = ADVANCED_FACE('',(#186755),#186780,.T.); +#186755 = FACE_BOUND('',#186756,.T.); +#186756 = EDGE_LOOP('',(#186757,#186758,#186766,#186774)); +#186757 = ORIENTED_EDGE('',*,*,#186736,.T.); +#186758 = ORIENTED_EDGE('',*,*,#186759,.T.); +#186759 = EDGE_CURVE('',#186729,#186760,#186762,.T.); +#186760 = VERTEX_POINT('',#186761); +#186761 = CARTESIAN_POINT('',(130.216853,-76.444443,1.545)); +#186762 = LINE('',#186763,#186764); +#186763 = CARTESIAN_POINT('',(130.201921,-76.480491,1.545)); +#186764 = VECTOR('',#186765,1.); +#186765 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186766 = ORIENTED_EDGE('',*,*,#186767,.F.); +#186767 = EDGE_CURVE('',#186768,#186760,#186770,.T.); +#186768 = VERTEX_POINT('',#186769); +#186769 = CARTESIAN_POINT('',(130.216853,-76.444443,1.51)); +#186770 = LINE('',#186771,#186772); +#186771 = CARTESIAN_POINT('',(130.216853,-76.444443,1.51)); +#186772 = VECTOR('',#186773,1.); +#186773 = DIRECTION('',(0.,0.,1.)); +#186774 = ORIENTED_EDGE('',*,*,#186775,.F.); +#186775 = EDGE_CURVE('',#186737,#186768,#186776,.T.); +#186776 = LINE('',#186777,#186778); +#186777 = CARTESIAN_POINT('',(130.201921,-76.480491,1.51)); +#186778 = VECTOR('',#186779,1.); +#186779 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186780 = PLANE('',#186781); +#186781 = AXIS2_PLACEMENT_3D('',#186782,#186783,#186784); +#186782 = CARTESIAN_POINT('',(130.201921,-76.480491,1.51)); +#186783 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#186784 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#186785 = ADVANCED_FACE('',(#186786),#186811,.T.); +#186786 = FACE_BOUND('',#186787,.T.); +#186787 = EDGE_LOOP('',(#186788,#186789,#186797,#186805)); +#186788 = ORIENTED_EDGE('',*,*,#186767,.T.); +#186789 = ORIENTED_EDGE('',*,*,#186790,.T.); +#186790 = EDGE_CURVE('',#186760,#186791,#186793,.T.); +#186791 = VERTEX_POINT('',#186792); +#186792 = CARTESIAN_POINT('',(130.394443,-76.266853,1.545)); +#186793 = LINE('',#186794,#186795); +#186794 = CARTESIAN_POINT('',(130.216853,-76.444443,1.545)); +#186795 = VECTOR('',#186796,1.); +#186796 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186797 = ORIENTED_EDGE('',*,*,#186798,.F.); +#186798 = EDGE_CURVE('',#186799,#186791,#186801,.T.); +#186799 = VERTEX_POINT('',#186800); +#186800 = CARTESIAN_POINT('',(130.394443,-76.266853,1.51)); +#186801 = LINE('',#186802,#186803); +#186802 = CARTESIAN_POINT('',(130.394443,-76.266853,1.51)); +#186803 = VECTOR('',#186804,1.); +#186804 = DIRECTION('',(0.,0.,1.)); +#186805 = ORIENTED_EDGE('',*,*,#186806,.F.); +#186806 = EDGE_CURVE('',#186768,#186799,#186807,.T.); +#186807 = LINE('',#186808,#186809); +#186808 = CARTESIAN_POINT('',(130.216853,-76.444443,1.51)); +#186809 = VECTOR('',#186810,1.); +#186810 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186811 = PLANE('',#186812); +#186812 = AXIS2_PLACEMENT_3D('',#186813,#186814,#186815); +#186813 = CARTESIAN_POINT('',(130.216853,-76.444443,1.51)); +#186814 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#186815 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#186816 = ADVANCED_FACE('',(#186817),#186842,.T.); +#186817 = FACE_BOUND('',#186818,.T.); +#186818 = EDGE_LOOP('',(#186819,#186820,#186828,#186836)); +#186819 = ORIENTED_EDGE('',*,*,#186798,.T.); +#186820 = ORIENTED_EDGE('',*,*,#186821,.T.); +#186821 = EDGE_CURVE('',#186791,#186822,#186824,.T.); +#186822 = VERTEX_POINT('',#186823); +#186823 = CARTESIAN_POINT('',(130.430491,-76.251921,1.545)); +#186824 = LINE('',#186825,#186826); +#186825 = CARTESIAN_POINT('',(130.394443,-76.266853,1.545)); +#186826 = VECTOR('',#186827,1.); +#186827 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#186828 = ORIENTED_EDGE('',*,*,#186829,.F.); +#186829 = EDGE_CURVE('',#186830,#186822,#186832,.T.); +#186830 = VERTEX_POINT('',#186831); +#186831 = CARTESIAN_POINT('',(130.430491,-76.251921,1.51)); +#186832 = LINE('',#186833,#186834); +#186833 = CARTESIAN_POINT('',(130.430491,-76.251921,1.51)); +#186834 = VECTOR('',#186835,1.); +#186835 = DIRECTION('',(0.,0.,1.)); +#186836 = ORIENTED_EDGE('',*,*,#186837,.F.); +#186837 = EDGE_CURVE('',#186799,#186830,#186838,.T.); +#186838 = LINE('',#186839,#186840); +#186839 = CARTESIAN_POINT('',(130.394443,-76.266853,1.51)); +#186840 = VECTOR('',#186841,1.); +#186841 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#186842 = PLANE('',#186843); +#186843 = AXIS2_PLACEMENT_3D('',#186844,#186845,#186846); +#186844 = CARTESIAN_POINT('',(130.394443,-76.266853,1.51)); +#186845 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#186846 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#186847 = ADVANCED_FACE('',(#186848),#186873,.T.); +#186848 = FACE_BOUND('',#186849,.T.); +#186849 = EDGE_LOOP('',(#186850,#186851,#186859,#186867)); +#186850 = ORIENTED_EDGE('',*,*,#186829,.T.); +#186851 = ORIENTED_EDGE('',*,*,#186852,.T.); +#186852 = EDGE_CURVE('',#186822,#186853,#186855,.T.); +#186853 = VERTEX_POINT('',#186854); +#186854 = CARTESIAN_POINT('',(133.068869,-76.25,1.545)); +#186855 = LINE('',#186856,#186857); +#186856 = CARTESIAN_POINT('',(130.430491,-76.251921,1.545)); +#186857 = VECTOR('',#186858,1.); +#186858 = DIRECTION('',(0.999999734936,7.280986616808E-04,0.)); +#186859 = ORIENTED_EDGE('',*,*,#186860,.F.); +#186860 = EDGE_CURVE('',#186861,#186853,#186863,.T.); +#186861 = VERTEX_POINT('',#186862); +#186862 = CARTESIAN_POINT('',(133.068869,-76.25,1.51)); +#186863 = LINE('',#186864,#186865); +#186864 = CARTESIAN_POINT('',(133.068869,-76.25,1.51)); +#186865 = VECTOR('',#186866,1.); +#186866 = DIRECTION('',(0.,0.,1.)); +#186867 = ORIENTED_EDGE('',*,*,#186868,.F.); +#186868 = EDGE_CURVE('',#186830,#186861,#186869,.T.); +#186869 = LINE('',#186870,#186871); +#186870 = CARTESIAN_POINT('',(130.430491,-76.251921,1.51)); +#186871 = VECTOR('',#186872,1.); +#186872 = DIRECTION('',(0.999999734936,7.280986616808E-04,0.)); +#186873 = PLANE('',#186874); +#186874 = AXIS2_PLACEMENT_3D('',#186875,#186876,#186877); +#186875 = CARTESIAN_POINT('',(130.430491,-76.251921,1.51)); +#186876 = DIRECTION('',(-7.280986616808E-04,0.999999734936,0.)); +#186877 = DIRECTION('',(0.999999734936,7.280986616808E-04,0.)); +#186878 = ADVANCED_FACE('',(#186879),#186904,.T.); +#186879 = FACE_BOUND('',#186880,.T.); +#186880 = EDGE_LOOP('',(#186881,#186882,#186890,#186898)); +#186881 = ORIENTED_EDGE('',*,*,#186860,.T.); +#186882 = ORIENTED_EDGE('',*,*,#186883,.T.); +#186883 = EDGE_CURVE('',#186853,#186884,#186886,.T.); +#186884 = VERTEX_POINT('',#186885); +#186885 = CARTESIAN_POINT('',(133.072836,-76.235195,1.545)); +#186886 = LINE('',#186887,#186888); +#186887 = CARTESIAN_POINT('',(133.068869,-76.25,1.545)); +#186888 = VECTOR('',#186889,1.); +#186889 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#186890 = ORIENTED_EDGE('',*,*,#186891,.F.); +#186891 = EDGE_CURVE('',#186892,#186884,#186894,.T.); +#186892 = VERTEX_POINT('',#186893); +#186893 = CARTESIAN_POINT('',(133.072836,-76.235195,1.51)); +#186894 = LINE('',#186895,#186896); +#186895 = CARTESIAN_POINT('',(133.072836,-76.235195,1.51)); +#186896 = VECTOR('',#186897,1.); +#186897 = DIRECTION('',(0.,0.,1.)); +#186898 = ORIENTED_EDGE('',*,*,#186899,.F.); +#186899 = EDGE_CURVE('',#186861,#186892,#186900,.T.); +#186900 = LINE('',#186901,#186902); +#186901 = CARTESIAN_POINT('',(133.068869,-76.25,1.51)); +#186902 = VECTOR('',#186903,1.); +#186903 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#186904 = PLANE('',#186905); +#186905 = AXIS2_PLACEMENT_3D('',#186906,#186907,#186908); +#186906 = CARTESIAN_POINT('',(133.068869,-76.25,1.51)); +#186907 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#186908 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#186909 = ADVANCED_FACE('',(#186910),#186937,.T.); +#186910 = FACE_BOUND('',#186911,.T.); +#186911 = EDGE_LOOP('',(#186912,#186913,#186922,#186930)); +#186912 = ORIENTED_EDGE('',*,*,#186891,.T.); +#186913 = ORIENTED_EDGE('',*,*,#186914,.T.); +#186914 = EDGE_CURVE('',#186884,#186915,#186917,.T.); +#186915 = VERTEX_POINT('',#186916); +#186916 = CARTESIAN_POINT('',(133.072836,-76.464805,1.545)); +#186917 = CIRCLE('',#186918,0.299997422619); +#186918 = AXIS2_PLACEMENT_3D('',#186919,#186920,#186921); +#186919 = CARTESIAN_POINT('',(133.34999708232,-76.35,1.545)); +#186920 = DIRECTION('',(0.,0.,-1.)); +#186921 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#186922 = ORIENTED_EDGE('',*,*,#186923,.F.); +#186923 = EDGE_CURVE('',#186924,#186915,#186926,.T.); +#186924 = VERTEX_POINT('',#186925); +#186925 = CARTESIAN_POINT('',(133.072836,-76.464805,1.51)); +#186926 = LINE('',#186927,#186928); +#186927 = CARTESIAN_POINT('',(133.072836,-76.464805,1.51)); +#186928 = VECTOR('',#186929,1.); +#186929 = DIRECTION('',(0.,0.,1.)); +#186930 = ORIENTED_EDGE('',*,*,#186931,.F.); +#186931 = EDGE_CURVE('',#186892,#186924,#186932,.T.); +#186932 = CIRCLE('',#186933,0.299997422619); +#186933 = AXIS2_PLACEMENT_3D('',#186934,#186935,#186936); +#186934 = CARTESIAN_POINT('',(133.34999708232,-76.35,1.51)); +#186935 = DIRECTION('',(0.,0.,-1.)); +#186936 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#186937 = CYLINDRICAL_SURFACE('',#186938,0.299997422619); +#186938 = AXIS2_PLACEMENT_3D('',#186939,#186940,#186941); +#186939 = CARTESIAN_POINT('',(133.34999708232,-76.35,1.51)); +#186940 = DIRECTION('',(0.,0.,-1.)); +#186941 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#186942 = ADVANCED_FACE('',(#186943),#186959,.T.); +#186943 = FACE_BOUND('',#186944,.T.); +#186944 = EDGE_LOOP('',(#186945,#186946,#186952,#186953)); +#186945 = ORIENTED_EDGE('',*,*,#186923,.T.); +#186946 = ORIENTED_EDGE('',*,*,#186947,.T.); +#186947 = EDGE_CURVE('',#186915,#185876,#186948,.T.); +#186948 = LINE('',#186949,#186950); +#186949 = CARTESIAN_POINT('',(133.072836,-76.464805,1.545)); +#186950 = VECTOR('',#186951,1.); +#186951 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#186952 = ORIENTED_EDGE('',*,*,#185873,.F.); +#186953 = ORIENTED_EDGE('',*,*,#186954,.F.); +#186954 = EDGE_CURVE('',#186924,#185874,#186955,.T.); +#186955 = LINE('',#186956,#186957); +#186956 = CARTESIAN_POINT('',(133.072836,-76.464805,1.51)); +#186957 = VECTOR('',#186958,1.); +#186958 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#186959 = PLANE('',#186960); +#186960 = AXIS2_PLACEMENT_3D('',#186961,#186962,#186963); +#186961 = CARTESIAN_POINT('',(133.072836,-76.464805,1.51)); +#186962 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#186963 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#186964 = ADVANCED_FACE('',(#186965),#186992,.F.); +#186965 = FACE_BOUND('',#186966,.T.); +#186966 = EDGE_LOOP('',(#186967,#186977,#186984,#186985)); +#186967 = ORIENTED_EDGE('',*,*,#186968,.T.); +#186968 = EDGE_CURVE('',#186969,#186971,#186973,.T.); +#186969 = VERTEX_POINT('',#186970); +#186970 = CARTESIAN_POINT('',(133.487255,-76.35,1.51)); +#186971 = VERTEX_POINT('',#186972); +#186972 = CARTESIAN_POINT('',(133.487255,-76.35,1.545)); +#186973 = LINE('',#186974,#186975); +#186974 = CARTESIAN_POINT('',(133.487255,-76.35,1.51)); +#186975 = VECTOR('',#186976,1.); +#186976 = DIRECTION('',(0.,0.,1.)); +#186977 = ORIENTED_EDGE('',*,*,#186978,.T.); +#186978 = EDGE_CURVE('',#186971,#186971,#186979,.T.); +#186979 = CIRCLE('',#186980,0.137255); +#186980 = AXIS2_PLACEMENT_3D('',#186981,#186982,#186983); +#186981 = CARTESIAN_POINT('',(133.35,-76.35,1.545)); +#186982 = DIRECTION('',(0.,0.,1.)); +#186983 = DIRECTION('',(1.,0.,-0.)); +#186984 = ORIENTED_EDGE('',*,*,#186968,.F.); +#186985 = ORIENTED_EDGE('',*,*,#186986,.F.); +#186986 = EDGE_CURVE('',#186969,#186969,#186987,.T.); +#186987 = CIRCLE('',#186988,0.137255); +#186988 = AXIS2_PLACEMENT_3D('',#186989,#186990,#186991); +#186989 = CARTESIAN_POINT('',(133.35,-76.35,1.51)); +#186990 = DIRECTION('',(0.,0.,1.)); +#186991 = DIRECTION('',(1.,0.,-0.)); +#186992 = CYLINDRICAL_SURFACE('',#186993,0.137255); +#186993 = AXIS2_PLACEMENT_3D('',#186994,#186995,#186996); +#186994 = CARTESIAN_POINT('',(133.35,-76.35,1.51)); +#186995 = DIRECTION('',(-0.,-0.,-1.)); +#186996 = DIRECTION('',(1.,0.,-0.)); +#186997 = ADVANCED_FACE('',(#186998,#187035),#187038,.F.); +#186998 = FACE_BOUND('',#186999,.T.); +#186999 = EDGE_LOOP('',(#187000,#187001,#187002,#187003,#187004,#187005, + #187006,#187007,#187008,#187009,#187010,#187011,#187012,#187013, + #187014,#187015,#187016,#187017,#187018,#187019,#187020,#187021, + #187022,#187023,#187024,#187025,#187026,#187027,#187028,#187029, + #187030,#187031,#187032,#187033,#187034)); +#187000 = ORIENTED_EDGE('',*,*,#185899,.T.); +#187001 = ORIENTED_EDGE('',*,*,#185930,.T.); +#187002 = ORIENTED_EDGE('',*,*,#185961,.T.); +#187003 = ORIENTED_EDGE('',*,*,#185993,.T.); +#187004 = ORIENTED_EDGE('',*,*,#186025,.T.); +#187005 = ORIENTED_EDGE('',*,*,#186056,.T.); +#187006 = ORIENTED_EDGE('',*,*,#186087,.T.); +#187007 = ORIENTED_EDGE('',*,*,#186118,.T.); +#187008 = ORIENTED_EDGE('',*,*,#186149,.T.); +#187009 = ORIENTED_EDGE('',*,*,#186180,.T.); +#187010 = ORIENTED_EDGE('',*,*,#186211,.T.); +#187011 = ORIENTED_EDGE('',*,*,#186242,.T.); +#187012 = ORIENTED_EDGE('',*,*,#186274,.T.); +#187013 = ORIENTED_EDGE('',*,*,#186306,.T.); +#187014 = ORIENTED_EDGE('',*,*,#186337,.T.); +#187015 = ORIENTED_EDGE('',*,*,#186368,.T.); +#187016 = ORIENTED_EDGE('',*,*,#186399,.T.); +#187017 = ORIENTED_EDGE('',*,*,#186430,.T.); +#187018 = ORIENTED_EDGE('',*,*,#186461,.T.); +#187019 = ORIENTED_EDGE('',*,*,#186492,.T.); +#187020 = ORIENTED_EDGE('',*,*,#186524,.T.); +#187021 = ORIENTED_EDGE('',*,*,#186556,.T.); +#187022 = ORIENTED_EDGE('',*,*,#186587,.T.); +#187023 = ORIENTED_EDGE('',*,*,#186619,.T.); +#187024 = ORIENTED_EDGE('',*,*,#186651,.T.); +#187025 = ORIENTED_EDGE('',*,*,#186682,.T.); +#187026 = ORIENTED_EDGE('',*,*,#186713,.T.); +#187027 = ORIENTED_EDGE('',*,*,#186744,.T.); +#187028 = ORIENTED_EDGE('',*,*,#186775,.T.); +#187029 = ORIENTED_EDGE('',*,*,#186806,.T.); +#187030 = ORIENTED_EDGE('',*,*,#186837,.T.); +#187031 = ORIENTED_EDGE('',*,*,#186868,.T.); +#187032 = ORIENTED_EDGE('',*,*,#186899,.T.); +#187033 = ORIENTED_EDGE('',*,*,#186931,.T.); +#187034 = ORIENTED_EDGE('',*,*,#186954,.T.); +#187035 = FACE_BOUND('',#187036,.T.); +#187036 = EDGE_LOOP('',(#187037)); +#187037 = ORIENTED_EDGE('',*,*,#186986,.T.); +#187038 = PLANE('',#187039); +#187039 = AXIS2_PLACEMENT_3D('',#187040,#187041,#187042); +#187040 = CARTESIAN_POINT('',(0.,0.,1.51)); +#187041 = DIRECTION('',(0.,0.,1.)); +#187042 = DIRECTION('',(1.,0.,-0.)); +#187043 = ADVANCED_FACE('',(#187044,#187081),#187084,.T.); +#187044 = FACE_BOUND('',#187045,.F.); +#187045 = EDGE_LOOP('',(#187046,#187047,#187048,#187049,#187050,#187051, + #187052,#187053,#187054,#187055,#187056,#187057,#187058,#187059, + #187060,#187061,#187062,#187063,#187064,#187065,#187066,#187067, + #187068,#187069,#187070,#187071,#187072,#187073,#187074,#187075, + #187076,#187077,#187078,#187079,#187080)); +#187046 = ORIENTED_EDGE('',*,*,#185883,.T.); +#187047 = ORIENTED_EDGE('',*,*,#185914,.T.); +#187048 = ORIENTED_EDGE('',*,*,#185945,.T.); +#187049 = ORIENTED_EDGE('',*,*,#185976,.T.); +#187050 = ORIENTED_EDGE('',*,*,#186009,.T.); +#187051 = ORIENTED_EDGE('',*,*,#186040,.T.); +#187052 = ORIENTED_EDGE('',*,*,#186071,.T.); +#187053 = ORIENTED_EDGE('',*,*,#186102,.T.); +#187054 = ORIENTED_EDGE('',*,*,#186133,.T.); +#187055 = ORIENTED_EDGE('',*,*,#186164,.T.); +#187056 = ORIENTED_EDGE('',*,*,#186195,.T.); +#187057 = ORIENTED_EDGE('',*,*,#186226,.T.); +#187058 = ORIENTED_EDGE('',*,*,#186257,.T.); +#187059 = ORIENTED_EDGE('',*,*,#186290,.T.); +#187060 = ORIENTED_EDGE('',*,*,#186321,.T.); +#187061 = ORIENTED_EDGE('',*,*,#186352,.T.); +#187062 = ORIENTED_EDGE('',*,*,#186383,.T.); +#187063 = ORIENTED_EDGE('',*,*,#186414,.T.); +#187064 = ORIENTED_EDGE('',*,*,#186445,.T.); +#187065 = ORIENTED_EDGE('',*,*,#186476,.T.); +#187066 = ORIENTED_EDGE('',*,*,#186507,.T.); +#187067 = ORIENTED_EDGE('',*,*,#186540,.T.); +#187068 = ORIENTED_EDGE('',*,*,#186571,.T.); +#187069 = ORIENTED_EDGE('',*,*,#186602,.T.); +#187070 = ORIENTED_EDGE('',*,*,#186635,.T.); +#187071 = ORIENTED_EDGE('',*,*,#186666,.T.); +#187072 = ORIENTED_EDGE('',*,*,#186697,.T.); +#187073 = ORIENTED_EDGE('',*,*,#186728,.T.); +#187074 = ORIENTED_EDGE('',*,*,#186759,.T.); +#187075 = ORIENTED_EDGE('',*,*,#186790,.T.); +#187076 = ORIENTED_EDGE('',*,*,#186821,.T.); +#187077 = ORIENTED_EDGE('',*,*,#186852,.T.); +#187078 = ORIENTED_EDGE('',*,*,#186883,.T.); +#187079 = ORIENTED_EDGE('',*,*,#186914,.T.); +#187080 = ORIENTED_EDGE('',*,*,#186947,.T.); +#187081 = FACE_BOUND('',#187082,.F.); +#187082 = EDGE_LOOP('',(#187083)); +#187083 = ORIENTED_EDGE('',*,*,#186978,.T.); +#187084 = PLANE('',#187085); +#187085 = AXIS2_PLACEMENT_3D('',#187086,#187087,#187088); +#187086 = CARTESIAN_POINT('',(0.,0.,1.545)); +#187087 = DIRECTION('',(0.,0.,1.)); +#187088 = DIRECTION('',(1.,0.,-0.)); +#187089 = MANIFOLD_SOLID_BREP('',#187090); +#187090 = CLOSED_SHELL('',(#187091,#187131,#187162,#187193,#187224, + #187255,#187286,#187319,#187350,#187381,#187412,#187443,#187474, + #187505,#187536,#187567,#187600,#187631,#187662,#187693,#187724, + #187746,#187779,#187811)); +#187091 = ADVANCED_FACE('',(#187092),#187126,.F.); +#187092 = FACE_BOUND('',#187093,.F.); +#187093 = EDGE_LOOP('',(#187094,#187104,#187112,#187120)); +#187094 = ORIENTED_EDGE('',*,*,#187095,.T.); +#187095 = EDGE_CURVE('',#187096,#187098,#187100,.T.); +#187096 = VERTEX_POINT('',#187097); +#187097 = CARTESIAN_POINT('',(136.342972,-74.316853,0.)); +#187098 = VERTEX_POINT('',#187099); +#187099 = CARTESIAN_POINT('',(136.342972,-74.316853,-3.5E-02)); +#187100 = LINE('',#187101,#187102); +#187101 = CARTESIAN_POINT('',(136.342972,-74.316853,0.)); +#187102 = VECTOR('',#187103,1.); +#187103 = DIRECTION('',(0.,0.,-1.)); +#187104 = ORIENTED_EDGE('',*,*,#187105,.T.); +#187105 = EDGE_CURVE('',#187098,#187106,#187108,.T.); +#187106 = VERTEX_POINT('',#187107); +#187107 = CARTESIAN_POINT('',(136.37902,-74.301921,-3.5E-02)); +#187108 = LINE('',#187109,#187110); +#187109 = CARTESIAN_POINT('',(136.342972,-74.316853,-3.5E-02)); +#187110 = VECTOR('',#187111,1.); +#187111 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#187112 = ORIENTED_EDGE('',*,*,#187113,.F.); +#187113 = EDGE_CURVE('',#187114,#187106,#187116,.T.); +#187114 = VERTEX_POINT('',#187115); +#187115 = CARTESIAN_POINT('',(136.37902,-74.301921,0.)); +#187116 = LINE('',#187117,#187118); +#187117 = CARTESIAN_POINT('',(136.37902,-74.301921,0.)); +#187118 = VECTOR('',#187119,1.); +#187119 = DIRECTION('',(0.,0.,-1.)); +#187120 = ORIENTED_EDGE('',*,*,#187121,.F.); +#187121 = EDGE_CURVE('',#187096,#187114,#187122,.T.); +#187122 = LINE('',#187123,#187124); +#187123 = CARTESIAN_POINT('',(136.342972,-74.316853,0.)); +#187124 = VECTOR('',#187125,1.); +#187125 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#187126 = PLANE('',#187127); +#187127 = AXIS2_PLACEMENT_3D('',#187128,#187129,#187130); +#187128 = CARTESIAN_POINT('',(136.342972,-74.316853,0.)); +#187129 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#187130 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#187131 = ADVANCED_FACE('',(#187132),#187157,.F.); +#187132 = FACE_BOUND('',#187133,.F.); +#187133 = EDGE_LOOP('',(#187134,#187135,#187143,#187151)); +#187134 = ORIENTED_EDGE('',*,*,#187113,.T.); +#187135 = ORIENTED_EDGE('',*,*,#187136,.T.); +#187136 = EDGE_CURVE('',#187106,#187137,#187139,.T.); +#187137 = VERTEX_POINT('',#187138); +#187138 = CARTESIAN_POINT('',(140.700975,-74.301921,-3.5E-02)); +#187139 = LINE('',#187140,#187141); +#187140 = CARTESIAN_POINT('',(136.37902,-74.301921,-3.5E-02)); +#187141 = VECTOR('',#187142,1.); +#187142 = DIRECTION('',(1.,0.,0.)); +#187143 = ORIENTED_EDGE('',*,*,#187144,.F.); +#187144 = EDGE_CURVE('',#187145,#187137,#187147,.T.); +#187145 = VERTEX_POINT('',#187146); +#187146 = CARTESIAN_POINT('',(140.700975,-74.301921,0.)); +#187147 = LINE('',#187148,#187149); +#187148 = CARTESIAN_POINT('',(140.700975,-74.301921,0.)); +#187149 = VECTOR('',#187150,1.); +#187150 = DIRECTION('',(0.,0.,-1.)); +#187151 = ORIENTED_EDGE('',*,*,#187152,.F.); +#187152 = EDGE_CURVE('',#187114,#187145,#187153,.T.); +#187153 = LINE('',#187154,#187155); +#187154 = CARTESIAN_POINT('',(136.37902,-74.301921,0.)); +#187155 = VECTOR('',#187156,1.); +#187156 = DIRECTION('',(1.,0.,0.)); +#187157 = PLANE('',#187158); +#187158 = AXIS2_PLACEMENT_3D('',#187159,#187160,#187161); +#187159 = CARTESIAN_POINT('',(136.37902,-74.301921,0.)); +#187160 = DIRECTION('',(0.,-1.,0.)); +#187161 = DIRECTION('',(1.,0.,0.)); +#187162 = ADVANCED_FACE('',(#187163),#187188,.F.); +#187163 = FACE_BOUND('',#187164,.F.); +#187164 = EDGE_LOOP('',(#187165,#187166,#187174,#187182)); +#187165 = ORIENTED_EDGE('',*,*,#187144,.T.); +#187166 = ORIENTED_EDGE('',*,*,#187167,.T.); +#187167 = EDGE_CURVE('',#187137,#187168,#187170,.T.); +#187168 = VERTEX_POINT('',#187169); +#187169 = CARTESIAN_POINT('',(140.737023,-74.316853,-3.5E-02)); +#187170 = LINE('',#187171,#187172); +#187171 = CARTESIAN_POINT('',(140.700975,-74.301921,-3.5E-02)); +#187172 = VECTOR('',#187173,1.); +#187173 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#187174 = ORIENTED_EDGE('',*,*,#187175,.F.); +#187175 = EDGE_CURVE('',#187176,#187168,#187178,.T.); +#187176 = VERTEX_POINT('',#187177); +#187177 = CARTESIAN_POINT('',(140.737023,-74.316853,0.)); +#187178 = LINE('',#187179,#187180); +#187179 = CARTESIAN_POINT('',(140.737023,-74.316853,0.)); +#187180 = VECTOR('',#187181,1.); +#187181 = DIRECTION('',(0.,0.,-1.)); +#187182 = ORIENTED_EDGE('',*,*,#187183,.F.); +#187183 = EDGE_CURVE('',#187145,#187176,#187184,.T.); +#187184 = LINE('',#187185,#187186); +#187185 = CARTESIAN_POINT('',(140.700975,-74.301921,0.)); +#187186 = VECTOR('',#187187,1.); +#187187 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#187188 = PLANE('',#187189); +#187189 = AXIS2_PLACEMENT_3D('',#187190,#187191,#187192); +#187190 = CARTESIAN_POINT('',(140.700975,-74.301921,0.)); +#187191 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#187192 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#187193 = ADVANCED_FACE('',(#187194),#187219,.F.); +#187194 = FACE_BOUND('',#187195,.F.); +#187195 = EDGE_LOOP('',(#187196,#187197,#187205,#187213)); +#187196 = ORIENTED_EDGE('',*,*,#187175,.T.); +#187197 = ORIENTED_EDGE('',*,*,#187198,.T.); +#187198 = EDGE_CURVE('',#187168,#187199,#187201,.T.); +#187199 = VERTEX_POINT('',#187200); +#187200 = CARTESIAN_POINT('',(141.883147,-75.462977,-3.5E-02)); +#187201 = LINE('',#187202,#187203); +#187202 = CARTESIAN_POINT('',(140.737023,-74.316853,-3.5E-02)); +#187203 = VECTOR('',#187204,1.); +#187204 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#187205 = ORIENTED_EDGE('',*,*,#187206,.F.); +#187206 = EDGE_CURVE('',#187207,#187199,#187209,.T.); +#187207 = VERTEX_POINT('',#187208); +#187208 = CARTESIAN_POINT('',(141.883147,-75.462977,0.)); +#187209 = LINE('',#187210,#187211); +#187210 = CARTESIAN_POINT('',(141.883147,-75.462977,0.)); +#187211 = VECTOR('',#187212,1.); +#187212 = DIRECTION('',(0.,0.,-1.)); +#187213 = ORIENTED_EDGE('',*,*,#187214,.F.); +#187214 = EDGE_CURVE('',#187176,#187207,#187215,.T.); +#187215 = LINE('',#187216,#187217); +#187216 = CARTESIAN_POINT('',(140.737023,-74.316853,0.)); +#187217 = VECTOR('',#187218,1.); +#187218 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#187219 = PLANE('',#187220); +#187220 = AXIS2_PLACEMENT_3D('',#187221,#187222,#187223); +#187221 = CARTESIAN_POINT('',(140.737023,-74.316853,0.)); +#187222 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#187223 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#187224 = ADVANCED_FACE('',(#187225),#187250,.F.); +#187225 = FACE_BOUND('',#187226,.F.); +#187226 = EDGE_LOOP('',(#187227,#187228,#187236,#187244)); +#187227 = ORIENTED_EDGE('',*,*,#187206,.T.); +#187228 = ORIENTED_EDGE('',*,*,#187229,.T.); +#187229 = EDGE_CURVE('',#187199,#187230,#187232,.T.); +#187230 = VERTEX_POINT('',#187231); +#187231 = CARTESIAN_POINT('',(141.898079,-75.499025,-3.5E-02)); +#187232 = LINE('',#187233,#187234); +#187233 = CARTESIAN_POINT('',(141.883147,-75.462977,-3.5E-02)); +#187234 = VECTOR('',#187235,1.); +#187235 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#187236 = ORIENTED_EDGE('',*,*,#187237,.F.); +#187237 = EDGE_CURVE('',#187238,#187230,#187240,.T.); +#187238 = VERTEX_POINT('',#187239); +#187239 = CARTESIAN_POINT('',(141.898079,-75.499025,0.)); +#187240 = LINE('',#187241,#187242); +#187241 = CARTESIAN_POINT('',(141.898079,-75.499025,0.)); +#187242 = VECTOR('',#187243,1.); +#187243 = DIRECTION('',(0.,0.,-1.)); +#187244 = ORIENTED_EDGE('',*,*,#187245,.F.); +#187245 = EDGE_CURVE('',#187207,#187238,#187246,.T.); +#187246 = LINE('',#187247,#187248); +#187247 = CARTESIAN_POINT('',(141.883147,-75.462977,0.)); +#187248 = VECTOR('',#187249,1.); +#187249 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#187250 = PLANE('',#187251); +#187251 = AXIS2_PLACEMENT_3D('',#187252,#187253,#187254); +#187252 = CARTESIAN_POINT('',(141.883147,-75.462977,0.)); +#187253 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#187254 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#187255 = ADVANCED_FACE('',(#187256),#187281,.F.); +#187256 = FACE_BOUND('',#187257,.F.); +#187257 = EDGE_LOOP('',(#187258,#187259,#187267,#187275)); +#187258 = ORIENTED_EDGE('',*,*,#187237,.T.); +#187259 = ORIENTED_EDGE('',*,*,#187260,.T.); +#187260 = EDGE_CURVE('',#187230,#187261,#187263,.T.); +#187261 = VERTEX_POINT('',#187262); +#187262 = CARTESIAN_POINT('',(141.898079,-76.419509,-3.5E-02)); +#187263 = LINE('',#187264,#187265); +#187264 = CARTESIAN_POINT('',(141.898079,-75.499025,-3.5E-02)); +#187265 = VECTOR('',#187266,1.); +#187266 = DIRECTION('',(0.,-1.,0.)); +#187267 = ORIENTED_EDGE('',*,*,#187268,.F.); +#187268 = EDGE_CURVE('',#187269,#187261,#187271,.T.); +#187269 = VERTEX_POINT('',#187270); +#187270 = CARTESIAN_POINT('',(141.898079,-76.419509,0.)); +#187271 = LINE('',#187272,#187273); +#187272 = CARTESIAN_POINT('',(141.898079,-76.419509,0.)); +#187273 = VECTOR('',#187274,1.); +#187274 = DIRECTION('',(0.,0.,-1.)); +#187275 = ORIENTED_EDGE('',*,*,#187276,.F.); +#187276 = EDGE_CURVE('',#187238,#187269,#187277,.T.); +#187277 = LINE('',#187278,#187279); +#187278 = CARTESIAN_POINT('',(141.898079,-75.499025,0.)); +#187279 = VECTOR('',#187280,1.); +#187280 = DIRECTION('',(0.,-1.,0.)); +#187281 = PLANE('',#187282); +#187282 = AXIS2_PLACEMENT_3D('',#187283,#187284,#187285); +#187283 = CARTESIAN_POINT('',(141.898079,-75.499025,0.)); +#187284 = DIRECTION('',(-1.,-0.,-0.)); +#187285 = DIRECTION('',(0.,-1.,0.)); +#187286 = ADVANCED_FACE('',(#187287),#187314,.T.); +#187287 = FACE_BOUND('',#187288,.F.); +#187288 = EDGE_LOOP('',(#187289,#187290,#187299,#187307)); +#187289 = ORIENTED_EDGE('',*,*,#187268,.T.); +#187290 = ORIENTED_EDGE('',*,*,#187291,.T.); +#187291 = EDGE_CURVE('',#187261,#187292,#187294,.T.); +#187292 = VERTEX_POINT('',#187293); +#187293 = CARTESIAN_POINT('',(141.701921,-76.419509,-3.5E-02)); +#187294 = CIRCLE('',#187295,0.100000456609); +#187295 = AXIS2_PLACEMENT_3D('',#187296,#187297,#187298); +#187296 = CARTESIAN_POINT('',(141.8,-76.4,-3.5E-02)); +#187297 = DIRECTION('',(-0.,0.,-1.)); +#187298 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#187299 = ORIENTED_EDGE('',*,*,#187300,.F.); +#187300 = EDGE_CURVE('',#187301,#187292,#187303,.T.); +#187301 = VERTEX_POINT('',#187302); +#187302 = CARTESIAN_POINT('',(141.701921,-76.419509,0.)); +#187303 = LINE('',#187304,#187305); +#187304 = CARTESIAN_POINT('',(141.701921,-76.419509,0.)); +#187305 = VECTOR('',#187306,1.); +#187306 = DIRECTION('',(0.,0.,-1.)); +#187307 = ORIENTED_EDGE('',*,*,#187308,.F.); +#187308 = EDGE_CURVE('',#187269,#187301,#187309,.T.); +#187309 = CIRCLE('',#187310,0.100000456609); +#187310 = AXIS2_PLACEMENT_3D('',#187311,#187312,#187313); +#187311 = CARTESIAN_POINT('',(141.8,-76.4,0.)); +#187312 = DIRECTION('',(-0.,0.,-1.)); +#187313 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#187314 = CYLINDRICAL_SURFACE('',#187315,0.100000456609); +#187315 = AXIS2_PLACEMENT_3D('',#187316,#187317,#187318); +#187316 = CARTESIAN_POINT('',(141.8,-76.4,0.)); +#187317 = DIRECTION('',(0.,-0.,1.)); +#187318 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#187319 = ADVANCED_FACE('',(#187320),#187345,.F.); +#187320 = FACE_BOUND('',#187321,.F.); +#187321 = EDGE_LOOP('',(#187322,#187323,#187331,#187339)); +#187322 = ORIENTED_EDGE('',*,*,#187300,.T.); +#187323 = ORIENTED_EDGE('',*,*,#187324,.T.); +#187324 = EDGE_CURVE('',#187292,#187325,#187327,.T.); +#187325 = VERTEX_POINT('',#187326); +#187326 = CARTESIAN_POINT('',(141.7,-75.559956,-3.5E-02)); +#187327 = LINE('',#187328,#187329); +#187328 = CARTESIAN_POINT('',(141.701921,-76.419509,-3.5E-02)); +#187329 = VECTOR('',#187330,1.); +#187330 = DIRECTION('',(-2.234876968167E-03,0.999997502659,0.)); +#187331 = ORIENTED_EDGE('',*,*,#187332,.F.); +#187332 = EDGE_CURVE('',#187333,#187325,#187335,.T.); +#187333 = VERTEX_POINT('',#187334); +#187334 = CARTESIAN_POINT('',(141.7,-75.559956,0.)); +#187335 = LINE('',#187336,#187337); +#187336 = CARTESIAN_POINT('',(141.7,-75.559956,0.)); +#187337 = VECTOR('',#187338,1.); +#187338 = DIRECTION('',(0.,0.,-1.)); +#187339 = ORIENTED_EDGE('',*,*,#187340,.F.); +#187340 = EDGE_CURVE('',#187301,#187333,#187341,.T.); +#187341 = LINE('',#187342,#187343); +#187342 = CARTESIAN_POINT('',(141.701921,-76.419509,0.)); +#187343 = VECTOR('',#187344,1.); +#187344 = DIRECTION('',(-2.234876968167E-03,0.999997502659,0.)); +#187345 = PLANE('',#187346); +#187346 = AXIS2_PLACEMENT_3D('',#187347,#187348,#187349); +#187347 = CARTESIAN_POINT('',(141.701921,-76.419509,0.)); +#187348 = DIRECTION('',(0.999997502659,2.234876968167E-03,0.)); +#187349 = DIRECTION('',(-2.234876968167E-03,0.999997502659,0.)); +#187350 = ADVANCED_FACE('',(#187351),#187376,.F.); +#187351 = FACE_BOUND('',#187352,.F.); +#187352 = EDGE_LOOP('',(#187353,#187354,#187362,#187370)); +#187353 = ORIENTED_EDGE('',*,*,#187332,.T.); +#187354 = ORIENTED_EDGE('',*,*,#187355,.T.); +#187355 = EDGE_CURVE('',#187325,#187356,#187358,.T.); +#187356 = VERTEX_POINT('',#187357); +#187357 = CARTESIAN_POINT('',(140.640044,-74.5,-3.5E-02)); +#187358 = LINE('',#187359,#187360); +#187359 = CARTESIAN_POINT('',(141.7,-75.559956,-3.5E-02)); +#187360 = VECTOR('',#187361,1.); +#187361 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#187362 = ORIENTED_EDGE('',*,*,#187363,.F.); +#187363 = EDGE_CURVE('',#187364,#187356,#187366,.T.); +#187364 = VERTEX_POINT('',#187365); +#187365 = CARTESIAN_POINT('',(140.640044,-74.5,0.)); +#187366 = LINE('',#187367,#187368); +#187367 = CARTESIAN_POINT('',(140.640044,-74.5,0.)); +#187368 = VECTOR('',#187369,1.); +#187369 = DIRECTION('',(0.,0.,-1.)); +#187370 = ORIENTED_EDGE('',*,*,#187371,.F.); +#187371 = EDGE_CURVE('',#187333,#187364,#187372,.T.); +#187372 = LINE('',#187373,#187374); +#187373 = CARTESIAN_POINT('',(141.7,-75.559956,0.)); +#187374 = VECTOR('',#187375,1.); +#187375 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#187376 = PLANE('',#187377); +#187377 = AXIS2_PLACEMENT_3D('',#187378,#187379,#187380); +#187378 = CARTESIAN_POINT('',(141.7,-75.559956,0.)); +#187379 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#187380 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#187381 = ADVANCED_FACE('',(#187382),#187407,.F.); +#187382 = FACE_BOUND('',#187383,.F.); +#187383 = EDGE_LOOP('',(#187384,#187385,#187393,#187401)); +#187384 = ORIENTED_EDGE('',*,*,#187363,.T.); +#187385 = ORIENTED_EDGE('',*,*,#187386,.T.); +#187386 = EDGE_CURVE('',#187356,#187387,#187389,.T.); +#187387 = VERTEX_POINT('',#187388); +#187388 = CARTESIAN_POINT('',(136.439951,-74.5,-3.5E-02)); +#187389 = LINE('',#187390,#187391); +#187390 = CARTESIAN_POINT('',(140.640044,-74.5,-3.5E-02)); +#187391 = VECTOR('',#187392,1.); +#187392 = DIRECTION('',(-1.,0.,0.)); +#187393 = ORIENTED_EDGE('',*,*,#187394,.F.); +#187394 = EDGE_CURVE('',#187395,#187387,#187397,.T.); +#187395 = VERTEX_POINT('',#187396); +#187396 = CARTESIAN_POINT('',(136.439951,-74.5,0.)); +#187397 = LINE('',#187398,#187399); +#187398 = CARTESIAN_POINT('',(136.439951,-74.5,0.)); +#187399 = VECTOR('',#187400,1.); +#187400 = DIRECTION('',(0.,0.,-1.)); +#187401 = ORIENTED_EDGE('',*,*,#187402,.F.); +#187402 = EDGE_CURVE('',#187364,#187395,#187403,.T.); +#187403 = LINE('',#187404,#187405); +#187404 = CARTESIAN_POINT('',(140.640044,-74.5,0.)); +#187405 = VECTOR('',#187406,1.); +#187406 = DIRECTION('',(-1.,0.,0.)); +#187407 = PLANE('',#187408); +#187408 = AXIS2_PLACEMENT_3D('',#187409,#187410,#187411); +#187409 = CARTESIAN_POINT('',(140.640044,-74.5,0.)); +#187410 = DIRECTION('',(0.,1.,0.)); +#187411 = DIRECTION('',(-1.,0.,0.)); +#187412 = ADVANCED_FACE('',(#187413),#187438,.F.); +#187413 = FACE_BOUND('',#187414,.F.); +#187414 = EDGE_LOOP('',(#187415,#187416,#187424,#187432)); +#187415 = ORIENTED_EDGE('',*,*,#187394,.T.); +#187416 = ORIENTED_EDGE('',*,*,#187417,.T.); +#187417 = EDGE_CURVE('',#187387,#187418,#187420,.T.); +#187418 = VERTEX_POINT('',#187419); +#187419 = CARTESIAN_POINT('',(135.453351,-75.483882,-3.5E-02)); +#187420 = LINE('',#187421,#187422); +#187421 = CARTESIAN_POINT('',(136.439951,-74.5,-3.5E-02)); +#187422 = VECTOR('',#187423,1.); +#187423 = DIRECTION('',(-0.708081460935,-0.706130756079,0.)); +#187424 = ORIENTED_EDGE('',*,*,#187425,.F.); +#187425 = EDGE_CURVE('',#187426,#187418,#187428,.T.); +#187426 = VERTEX_POINT('',#187427); +#187427 = CARTESIAN_POINT('',(135.453351,-75.483882,0.)); +#187428 = LINE('',#187429,#187430); +#187429 = CARTESIAN_POINT('',(135.453351,-75.483882,0.)); +#187430 = VECTOR('',#187431,1.); +#187431 = DIRECTION('',(0.,0.,-1.)); +#187432 = ORIENTED_EDGE('',*,*,#187433,.F.); +#187433 = EDGE_CURVE('',#187395,#187426,#187434,.T.); +#187434 = LINE('',#187435,#187436); +#187435 = CARTESIAN_POINT('',(136.439951,-74.5,0.)); +#187436 = VECTOR('',#187437,1.); +#187437 = DIRECTION('',(-0.708081460935,-0.706130756079,0.)); +#187438 = PLANE('',#187439); +#187439 = AXIS2_PLACEMENT_3D('',#187440,#187441,#187442); +#187440 = CARTESIAN_POINT('',(136.439951,-74.5,0.)); +#187441 = DIRECTION('',(-0.706130756079,0.708081460935,0.)); +#187442 = DIRECTION('',(-0.708081460935,-0.706130756079,0.)); +#187443 = ADVANCED_FACE('',(#187444),#187469,.F.); +#187444 = FACE_BOUND('',#187445,.F.); +#187445 = EDGE_LOOP('',(#187446,#187447,#187455,#187463)); +#187446 = ORIENTED_EDGE('',*,*,#187425,.T.); +#187447 = ORIENTED_EDGE('',*,*,#187448,.T.); +#187448 = EDGE_CURVE('',#187418,#187449,#187451,.T.); +#187449 = VERTEX_POINT('',#187450); +#187450 = CARTESIAN_POINT('',(135.417303,-75.498814,-3.5E-02)); +#187451 = LINE('',#187452,#187453); +#187452 = CARTESIAN_POINT('',(135.453351,-75.483882,-3.5E-02)); +#187453 = VECTOR('',#187454,1.); +#187454 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#187455 = ORIENTED_EDGE('',*,*,#187456,.F.); +#187456 = EDGE_CURVE('',#187457,#187449,#187459,.T.); +#187457 = VERTEX_POINT('',#187458); +#187458 = CARTESIAN_POINT('',(135.417303,-75.498814,0.)); +#187459 = LINE('',#187460,#187461); +#187460 = CARTESIAN_POINT('',(135.417303,-75.498814,0.)); +#187461 = VECTOR('',#187462,1.); +#187462 = DIRECTION('',(0.,0.,-1.)); +#187463 = ORIENTED_EDGE('',*,*,#187464,.F.); +#187464 = EDGE_CURVE('',#187426,#187457,#187465,.T.); +#187465 = LINE('',#187466,#187467); +#187466 = CARTESIAN_POINT('',(135.453351,-75.483882,0.)); +#187467 = VECTOR('',#187468,1.); +#187468 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#187469 = PLANE('',#187470); +#187470 = AXIS2_PLACEMENT_3D('',#187471,#187472,#187473); +#187471 = CARTESIAN_POINT('',(135.453351,-75.483882,0.)); +#187472 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#187473 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#187474 = ADVANCED_FACE('',(#187475),#187500,.F.); +#187475 = FACE_BOUND('',#187476,.F.); +#187476 = EDGE_LOOP('',(#187477,#187478,#187486,#187494)); +#187477 = ORIENTED_EDGE('',*,*,#187456,.T.); +#187478 = ORIENTED_EDGE('',*,*,#187479,.T.); +#187479 = EDGE_CURVE('',#187449,#187480,#187482,.T.); +#187480 = VERTEX_POINT('',#187481); +#187481 = CARTESIAN_POINT('',(134.340686,-75.500735,-3.5E-02)); +#187482 = LINE('',#187483,#187484); +#187483 = CARTESIAN_POINT('',(135.417303,-75.498814,-3.5E-02)); +#187484 = VECTOR('',#187485,1.); +#187485 = DIRECTION('',(-0.999998408153,-1.784289995488E-03,0.)); +#187486 = ORIENTED_EDGE('',*,*,#187487,.F.); +#187487 = EDGE_CURVE('',#187488,#187480,#187490,.T.); +#187488 = VERTEX_POINT('',#187489); +#187489 = CARTESIAN_POINT('',(134.340686,-75.500735,0.)); +#187490 = LINE('',#187491,#187492); +#187491 = CARTESIAN_POINT('',(134.340686,-75.500735,0.)); +#187492 = VECTOR('',#187493,1.); +#187493 = DIRECTION('',(0.,0.,-1.)); +#187494 = ORIENTED_EDGE('',*,*,#187495,.F.); +#187495 = EDGE_CURVE('',#187457,#187488,#187496,.T.); +#187496 = LINE('',#187497,#187498); +#187497 = CARTESIAN_POINT('',(135.417303,-75.498814,0.)); +#187498 = VECTOR('',#187499,1.); +#187499 = DIRECTION('',(-0.999998408153,-1.784289995488E-03,0.)); +#187500 = PLANE('',#187501); +#187501 = AXIS2_PLACEMENT_3D('',#187502,#187503,#187504); +#187502 = CARTESIAN_POINT('',(135.417303,-75.498814,0.)); +#187503 = DIRECTION('',(-1.784289995488E-03,0.999998408153,0.)); +#187504 = DIRECTION('',(-0.999998408153,-1.784289995488E-03,0.)); +#187505 = ADVANCED_FACE('',(#187506),#187531,.F.); +#187506 = FACE_BOUND('',#187507,.F.); +#187507 = EDGE_LOOP('',(#187508,#187509,#187517,#187525)); +#187508 = ORIENTED_EDGE('',*,*,#187487,.T.); +#187509 = ORIENTED_EDGE('',*,*,#187510,.T.); +#187510 = EDGE_CURVE('',#187480,#187511,#187513,.T.); +#187511 = VERTEX_POINT('',#187512); +#187512 = CARTESIAN_POINT('',(133.6195,-76.221921,-3.5E-02)); +#187513 = LINE('',#187514,#187515); +#187514 = CARTESIAN_POINT('',(134.340686,-75.500735,-3.5E-02)); +#187515 = VECTOR('',#187516,1.); +#187516 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#187517 = ORIENTED_EDGE('',*,*,#187518,.F.); +#187518 = EDGE_CURVE('',#187519,#187511,#187521,.T.); +#187519 = VERTEX_POINT('',#187520); +#187520 = CARTESIAN_POINT('',(133.6195,-76.221921,0.)); +#187521 = LINE('',#187522,#187523); +#187522 = CARTESIAN_POINT('',(133.6195,-76.221921,0.)); +#187523 = VECTOR('',#187524,1.); +#187524 = DIRECTION('',(0.,0.,-1.)); +#187525 = ORIENTED_EDGE('',*,*,#187526,.F.); +#187526 = EDGE_CURVE('',#187488,#187519,#187527,.T.); +#187527 = LINE('',#187528,#187529); +#187528 = CARTESIAN_POINT('',(134.340686,-75.500735,0.)); +#187529 = VECTOR('',#187530,1.); +#187530 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#187531 = PLANE('',#187532); +#187532 = AXIS2_PLACEMENT_3D('',#187533,#187534,#187535); +#187533 = CARTESIAN_POINT('',(134.340686,-75.500735,0.)); +#187534 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#187535 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#187536 = ADVANCED_FACE('',(#187537),#187562,.F.); +#187537 = FACE_BOUND('',#187538,.F.); +#187538 = EDGE_LOOP('',(#187539,#187540,#187548,#187556)); +#187539 = ORIENTED_EDGE('',*,*,#187518,.T.); +#187540 = ORIENTED_EDGE('',*,*,#187541,.T.); +#187541 = EDGE_CURVE('',#187511,#187542,#187544,.T.); +#187542 = VERTEX_POINT('',#187543); +#187543 = CARTESIAN_POINT('',(133.627164,-76.235195,-3.5E-02)); +#187544 = LINE('',#187545,#187546); +#187545 = CARTESIAN_POINT('',(133.6195,-76.221921,-3.5E-02)); +#187546 = VECTOR('',#187547,1.); +#187547 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#187548 = ORIENTED_EDGE('',*,*,#187549,.F.); +#187549 = EDGE_CURVE('',#187550,#187542,#187552,.T.); +#187550 = VERTEX_POINT('',#187551); +#187551 = CARTESIAN_POINT('',(133.627164,-76.235195,0.)); +#187552 = LINE('',#187553,#187554); +#187553 = CARTESIAN_POINT('',(133.627164,-76.235195,0.)); +#187554 = VECTOR('',#187555,1.); +#187555 = DIRECTION('',(0.,0.,-1.)); +#187556 = ORIENTED_EDGE('',*,*,#187557,.F.); +#187557 = EDGE_CURVE('',#187519,#187550,#187558,.T.); +#187558 = LINE('',#187559,#187560); +#187559 = CARTESIAN_POINT('',(133.6195,-76.221921,0.)); +#187560 = VECTOR('',#187561,1.); +#187561 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#187562 = PLANE('',#187563); +#187563 = AXIS2_PLACEMENT_3D('',#187564,#187565,#187566); +#187564 = CARTESIAN_POINT('',(133.6195,-76.221921,0.)); +#187565 = DIRECTION('',(-0.866018269693,-0.500012356405,-0.)); +#187566 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#187567 = ADVANCED_FACE('',(#187568),#187595,.T.); +#187568 = FACE_BOUND('',#187569,.F.); +#187569 = EDGE_LOOP('',(#187570,#187571,#187580,#187588)); +#187570 = ORIENTED_EDGE('',*,*,#187549,.T.); +#187571 = ORIENTED_EDGE('',*,*,#187572,.T.); +#187572 = EDGE_CURVE('',#187542,#187573,#187575,.T.); +#187573 = VERTEX_POINT('',#187574); +#187574 = CARTESIAN_POINT('',(133.464805,-76.072836,-3.5E-02)); +#187575 = CIRCLE('',#187576,0.299999934501); +#187576 = AXIS2_PLACEMENT_3D('',#187577,#187578,#187579); +#187577 = CARTESIAN_POINT('',(133.35000014059,-76.3499998594,-3.5E-02)); +#187578 = DIRECTION('',(0.,0.,-1.)); +#187579 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#187580 = ORIENTED_EDGE('',*,*,#187581,.F.); +#187581 = EDGE_CURVE('',#187582,#187573,#187584,.T.); +#187582 = VERTEX_POINT('',#187583); +#187583 = CARTESIAN_POINT('',(133.464805,-76.072836,0.)); +#187584 = LINE('',#187585,#187586); +#187585 = CARTESIAN_POINT('',(133.464805,-76.072836,0.)); +#187586 = VECTOR('',#187587,1.); +#187587 = DIRECTION('',(0.,0.,-1.)); +#187588 = ORIENTED_EDGE('',*,*,#187589,.F.); +#187589 = EDGE_CURVE('',#187550,#187582,#187590,.T.); +#187590 = CIRCLE('',#187591,0.299999934501); +#187591 = AXIS2_PLACEMENT_3D('',#187592,#187593,#187594); +#187592 = CARTESIAN_POINT('',(133.35000014059,-76.3499998594,0.)); +#187593 = DIRECTION('',(0.,0.,-1.)); +#187594 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#187595 = CYLINDRICAL_SURFACE('',#187596,0.299999934501); +#187596 = AXIS2_PLACEMENT_3D('',#187597,#187598,#187599); +#187597 = CARTESIAN_POINT('',(133.35000014059,-76.3499998594,0.)); +#187598 = DIRECTION('',(-0.,-0.,1.)); +#187599 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#187600 = ADVANCED_FACE('',(#187601),#187626,.F.); +#187601 = FACE_BOUND('',#187602,.F.); +#187602 = EDGE_LOOP('',(#187603,#187604,#187612,#187620)); +#187603 = ORIENTED_EDGE('',*,*,#187581,.T.); +#187604 = ORIENTED_EDGE('',*,*,#187605,.T.); +#187605 = EDGE_CURVE('',#187573,#187606,#187608,.T.); +#187606 = VERTEX_POINT('',#187607); +#187607 = CARTESIAN_POINT('',(133.478078,-76.080499,-3.5E-02)); +#187608 = LINE('',#187609,#187610); +#187609 = CARTESIAN_POINT('',(133.464805,-76.072836,-3.5E-02)); +#187610 = VECTOR('',#187611,1.); +#187611 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#187612 = ORIENTED_EDGE('',*,*,#187613,.F.); +#187613 = EDGE_CURVE('',#187614,#187606,#187616,.T.); +#187614 = VERTEX_POINT('',#187615); +#187615 = CARTESIAN_POINT('',(133.478078,-76.080499,0.)); +#187616 = LINE('',#187617,#187618); +#187617 = CARTESIAN_POINT('',(133.478078,-76.080499,0.)); +#187618 = VECTOR('',#187619,1.); +#187619 = DIRECTION('',(0.,0.,-1.)); +#187620 = ORIENTED_EDGE('',*,*,#187621,.F.); +#187621 = EDGE_CURVE('',#187582,#187614,#187622,.T.); +#187622 = LINE('',#187623,#187624); +#187623 = CARTESIAN_POINT('',(133.464805,-76.072836,0.)); +#187624 = VECTOR('',#187625,1.); +#187625 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#187626 = PLANE('',#187627); +#187627 = AXIS2_PLACEMENT_3D('',#187628,#187629,#187630); +#187628 = CARTESIAN_POINT('',(133.464805,-76.072836,0.)); +#187629 = DIRECTION('',(-0.499991674903,-0.866030210228,-0.)); +#187630 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#187631 = ADVANCED_FACE('',(#187632),#187657,.F.); +#187632 = FACE_BOUND('',#187633,.F.); +#187633 = EDGE_LOOP('',(#187634,#187635,#187643,#187651)); +#187634 = ORIENTED_EDGE('',*,*,#187613,.T.); +#187635 = ORIENTED_EDGE('',*,*,#187636,.T.); +#187636 = EDGE_CURVE('',#187606,#187637,#187639,.T.); +#187637 = VERTEX_POINT('',#187638); +#187638 = CARTESIAN_POINT('',(134.243707,-75.317588,-3.5E-02)); +#187639 = LINE('',#187640,#187641); +#187640 = CARTESIAN_POINT('',(133.478078,-76.080499,-3.5E-02)); +#187641 = VECTOR('',#187642,1.); +#187642 = DIRECTION('',(0.708363015536,0.705848311056,0.)); +#187643 = ORIENTED_EDGE('',*,*,#187644,.F.); +#187644 = EDGE_CURVE('',#187645,#187637,#187647,.T.); +#187645 = VERTEX_POINT('',#187646); +#187646 = CARTESIAN_POINT('',(134.243707,-75.317588,0.)); +#187647 = LINE('',#187648,#187649); +#187648 = CARTESIAN_POINT('',(134.243707,-75.317588,0.)); +#187649 = VECTOR('',#187650,1.); +#187650 = DIRECTION('',(0.,0.,-1.)); +#187651 = ORIENTED_EDGE('',*,*,#187652,.F.); +#187652 = EDGE_CURVE('',#187614,#187645,#187653,.T.); +#187653 = LINE('',#187654,#187655); +#187654 = CARTESIAN_POINT('',(133.478078,-76.080499,0.)); +#187655 = VECTOR('',#187656,1.); +#187656 = DIRECTION('',(0.708363015536,0.705848311056,0.)); +#187657 = PLANE('',#187658); +#187658 = AXIS2_PLACEMENT_3D('',#187659,#187660,#187661); +#187659 = CARTESIAN_POINT('',(133.478078,-76.080499,0.)); +#187660 = DIRECTION('',(0.705848311056,-0.708363015536,0.)); +#187661 = DIRECTION('',(0.708363015536,0.705848311056,0.)); +#187662 = ADVANCED_FACE('',(#187663),#187688,.F.); +#187663 = FACE_BOUND('',#187664,.F.); +#187664 = EDGE_LOOP('',(#187665,#187666,#187674,#187682)); +#187665 = ORIENTED_EDGE('',*,*,#187644,.T.); +#187666 = ORIENTED_EDGE('',*,*,#187667,.T.); +#187667 = EDGE_CURVE('',#187637,#187668,#187670,.T.); +#187668 = VERTEX_POINT('',#187669); +#187669 = CARTESIAN_POINT('',(134.279756,-75.302656,-3.5E-02)); +#187670 = LINE('',#187671,#187672); +#187671 = CARTESIAN_POINT('',(134.243707,-75.317588,-3.5E-02)); +#187672 = VECTOR('',#187673,1.); +#187673 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#187674 = ORIENTED_EDGE('',*,*,#187675,.F.); +#187675 = EDGE_CURVE('',#187676,#187668,#187678,.T.); +#187676 = VERTEX_POINT('',#187677); +#187677 = CARTESIAN_POINT('',(134.279756,-75.302656,0.)); +#187678 = LINE('',#187679,#187680); +#187679 = CARTESIAN_POINT('',(134.279756,-75.302656,0.)); +#187680 = VECTOR('',#187681,1.); +#187681 = DIRECTION('',(0.,0.,-1.)); +#187682 = ORIENTED_EDGE('',*,*,#187683,.F.); +#187683 = EDGE_CURVE('',#187645,#187676,#187684,.T.); +#187684 = LINE('',#187685,#187686); +#187685 = CARTESIAN_POINT('',(134.243707,-75.317588,0.)); +#187686 = VECTOR('',#187687,1.); +#187687 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#187688 = PLANE('',#187689); +#187689 = AXIS2_PLACEMENT_3D('',#187690,#187691,#187692); +#187690 = CARTESIAN_POINT('',(134.243707,-75.317588,0.)); +#187691 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#187692 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#187693 = ADVANCED_FACE('',(#187694),#187719,.F.); +#187694 = FACE_BOUND('',#187695,.F.); +#187695 = EDGE_LOOP('',(#187696,#187697,#187705,#187713)); +#187696 = ORIENTED_EDGE('',*,*,#187675,.T.); +#187697 = ORIENTED_EDGE('',*,*,#187698,.T.); +#187698 = EDGE_CURVE('',#187668,#187699,#187701,.T.); +#187699 = VERTEX_POINT('',#187700); +#187700 = CARTESIAN_POINT('',(135.356372,-75.300735,-3.5E-02)); +#187701 = LINE('',#187702,#187703); +#187702 = CARTESIAN_POINT('',(134.279756,-75.302656,-3.5E-02)); +#187703 = VECTOR('',#187704,1.); +#187704 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#187705 = ORIENTED_EDGE('',*,*,#187706,.F.); +#187706 = EDGE_CURVE('',#187707,#187699,#187709,.T.); +#187707 = VERTEX_POINT('',#187708); +#187708 = CARTESIAN_POINT('',(135.356372,-75.300735,0.)); +#187709 = LINE('',#187710,#187711); +#187710 = CARTESIAN_POINT('',(135.356372,-75.300735,0.)); +#187711 = VECTOR('',#187712,1.); +#187712 = DIRECTION('',(0.,0.,-1.)); +#187713 = ORIENTED_EDGE('',*,*,#187714,.F.); +#187714 = EDGE_CURVE('',#187676,#187707,#187715,.T.); +#187715 = LINE('',#187716,#187717); +#187716 = CARTESIAN_POINT('',(134.279756,-75.302656,0.)); +#187717 = VECTOR('',#187718,1.); +#187718 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#187719 = PLANE('',#187720); +#187720 = AXIS2_PLACEMENT_3D('',#187721,#187722,#187723); +#187721 = CARTESIAN_POINT('',(134.279756,-75.302656,0.)); +#187722 = DIRECTION('',(1.784291652783E-03,-0.99999840815,0.)); +#187723 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#187724 = ADVANCED_FACE('',(#187725),#187741,.F.); +#187725 = FACE_BOUND('',#187726,.F.); +#187726 = EDGE_LOOP('',(#187727,#187728,#187734,#187735)); +#187727 = ORIENTED_EDGE('',*,*,#187706,.T.); +#187728 = ORIENTED_EDGE('',*,*,#187729,.T.); +#187729 = EDGE_CURVE('',#187699,#187098,#187730,.T.); +#187730 = LINE('',#187731,#187732); +#187731 = CARTESIAN_POINT('',(135.356372,-75.300735,-3.5E-02)); +#187732 = VECTOR('',#187733,1.); +#187733 = DIRECTION('',(0.708081460935,0.706130756079,0.)); +#187734 = ORIENTED_EDGE('',*,*,#187095,.F.); +#187735 = ORIENTED_EDGE('',*,*,#187736,.F.); +#187736 = EDGE_CURVE('',#187707,#187096,#187737,.T.); +#187737 = LINE('',#187738,#187739); +#187738 = CARTESIAN_POINT('',(135.356372,-75.300735,0.)); +#187739 = VECTOR('',#187740,1.); +#187740 = DIRECTION('',(0.708081460935,0.706130756079,0.)); +#187741 = PLANE('',#187742); +#187742 = AXIS2_PLACEMENT_3D('',#187743,#187744,#187745); +#187743 = CARTESIAN_POINT('',(135.356372,-75.300735,0.)); +#187744 = DIRECTION('',(0.706130756079,-0.708081460935,0.)); +#187745 = DIRECTION('',(0.708081460935,0.706130756079,0.)); +#187746 = ADVANCED_FACE('',(#187747),#187774,.F.); +#187747 = FACE_BOUND('',#187748,.F.); +#187748 = EDGE_LOOP('',(#187749,#187759,#187766,#187767)); +#187749 = ORIENTED_EDGE('',*,*,#187750,.T.); +#187750 = EDGE_CURVE('',#187751,#187753,#187755,.T.); +#187751 = VERTEX_POINT('',#187752); +#187752 = CARTESIAN_POINT('',(133.487255,-76.35,0.)); +#187753 = VERTEX_POINT('',#187754); +#187754 = CARTESIAN_POINT('',(133.487255,-76.35,-3.5E-02)); +#187755 = LINE('',#187756,#187757); +#187756 = CARTESIAN_POINT('',(133.487255,-76.35,0.)); +#187757 = VECTOR('',#187758,1.); +#187758 = DIRECTION('',(0.,0.,-1.)); +#187759 = ORIENTED_EDGE('',*,*,#187760,.T.); +#187760 = EDGE_CURVE('',#187753,#187753,#187761,.T.); +#187761 = CIRCLE('',#187762,0.137255); +#187762 = AXIS2_PLACEMENT_3D('',#187763,#187764,#187765); +#187763 = CARTESIAN_POINT('',(133.35,-76.35,-3.5E-02)); +#187764 = DIRECTION('',(0.,0.,1.)); +#187765 = DIRECTION('',(1.,0.,-0.)); +#187766 = ORIENTED_EDGE('',*,*,#187750,.F.); +#187767 = ORIENTED_EDGE('',*,*,#187768,.F.); +#187768 = EDGE_CURVE('',#187751,#187751,#187769,.T.); +#187769 = CIRCLE('',#187770,0.137255); +#187770 = AXIS2_PLACEMENT_3D('',#187771,#187772,#187773); +#187771 = CARTESIAN_POINT('',(133.35,-76.35,0.)); +#187772 = DIRECTION('',(0.,0.,1.)); +#187773 = DIRECTION('',(1.,0.,-0.)); +#187774 = CYLINDRICAL_SURFACE('',#187775,0.137255); +#187775 = AXIS2_PLACEMENT_3D('',#187776,#187777,#187778); +#187776 = CARTESIAN_POINT('',(133.35,-76.35,0.)); +#187777 = DIRECTION('',(0.,0.,1.)); +#187778 = DIRECTION('',(1.,0.,-0.)); +#187779 = ADVANCED_FACE('',(#187780,#187803),#187806,.F.); +#187780 = FACE_BOUND('',#187781,.F.); +#187781 = EDGE_LOOP('',(#187782,#187783,#187784,#187785,#187786,#187787, + #187788,#187789,#187790,#187791,#187792,#187793,#187794,#187795, + #187796,#187797,#187798,#187799,#187800,#187801,#187802)); +#187782 = ORIENTED_EDGE('',*,*,#187121,.T.); +#187783 = ORIENTED_EDGE('',*,*,#187152,.T.); +#187784 = ORIENTED_EDGE('',*,*,#187183,.T.); +#187785 = ORIENTED_EDGE('',*,*,#187214,.T.); +#187786 = ORIENTED_EDGE('',*,*,#187245,.T.); +#187787 = ORIENTED_EDGE('',*,*,#187276,.T.); +#187788 = ORIENTED_EDGE('',*,*,#187308,.T.); +#187789 = ORIENTED_EDGE('',*,*,#187340,.T.); +#187790 = ORIENTED_EDGE('',*,*,#187371,.T.); +#187791 = ORIENTED_EDGE('',*,*,#187402,.T.); +#187792 = ORIENTED_EDGE('',*,*,#187433,.T.); +#187793 = ORIENTED_EDGE('',*,*,#187464,.T.); +#187794 = ORIENTED_EDGE('',*,*,#187495,.T.); +#187795 = ORIENTED_EDGE('',*,*,#187526,.T.); +#187796 = ORIENTED_EDGE('',*,*,#187557,.T.); +#187797 = ORIENTED_EDGE('',*,*,#187589,.T.); +#187798 = ORIENTED_EDGE('',*,*,#187621,.T.); +#187799 = ORIENTED_EDGE('',*,*,#187652,.T.); +#187800 = ORIENTED_EDGE('',*,*,#187683,.T.); +#187801 = ORIENTED_EDGE('',*,*,#187714,.T.); +#187802 = ORIENTED_EDGE('',*,*,#187736,.T.); +#187803 = FACE_BOUND('',#187804,.F.); +#187804 = EDGE_LOOP('',(#187805)); +#187805 = ORIENTED_EDGE('',*,*,#187768,.T.); +#187806 = PLANE('',#187807); +#187807 = AXIS2_PLACEMENT_3D('',#187808,#187809,#187810); +#187808 = CARTESIAN_POINT('',(0.,0.,0.)); +#187809 = DIRECTION('',(-0.,-0.,-1.)); +#187810 = DIRECTION('',(-1.,0.,0.)); +#187811 = ADVANCED_FACE('',(#187812,#187835),#187838,.T.); +#187812 = FACE_BOUND('',#187813,.T.); +#187813 = EDGE_LOOP('',(#187814,#187815,#187816,#187817,#187818,#187819, + #187820,#187821,#187822,#187823,#187824,#187825,#187826,#187827, + #187828,#187829,#187830,#187831,#187832,#187833,#187834)); +#187814 = ORIENTED_EDGE('',*,*,#187105,.T.); +#187815 = ORIENTED_EDGE('',*,*,#187136,.T.); +#187816 = ORIENTED_EDGE('',*,*,#187167,.T.); +#187817 = ORIENTED_EDGE('',*,*,#187198,.T.); +#187818 = ORIENTED_EDGE('',*,*,#187229,.T.); +#187819 = ORIENTED_EDGE('',*,*,#187260,.T.); +#187820 = ORIENTED_EDGE('',*,*,#187291,.T.); +#187821 = ORIENTED_EDGE('',*,*,#187324,.T.); +#187822 = ORIENTED_EDGE('',*,*,#187355,.T.); +#187823 = ORIENTED_EDGE('',*,*,#187386,.T.); +#187824 = ORIENTED_EDGE('',*,*,#187417,.T.); +#187825 = ORIENTED_EDGE('',*,*,#187448,.T.); +#187826 = ORIENTED_EDGE('',*,*,#187479,.T.); +#187827 = ORIENTED_EDGE('',*,*,#187510,.T.); +#187828 = ORIENTED_EDGE('',*,*,#187541,.T.); +#187829 = ORIENTED_EDGE('',*,*,#187572,.T.); +#187830 = ORIENTED_EDGE('',*,*,#187605,.T.); +#187831 = ORIENTED_EDGE('',*,*,#187636,.T.); +#187832 = ORIENTED_EDGE('',*,*,#187667,.T.); +#187833 = ORIENTED_EDGE('',*,*,#187698,.T.); +#187834 = ORIENTED_EDGE('',*,*,#187729,.T.); +#187835 = FACE_BOUND('',#187836,.T.); +#187836 = EDGE_LOOP('',(#187837)); +#187837 = ORIENTED_EDGE('',*,*,#187760,.T.); +#187838 = PLANE('',#187839); +#187839 = AXIS2_PLACEMENT_3D('',#187840,#187841,#187842); +#187840 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#187841 = DIRECTION('',(-0.,-0.,-1.)); +#187842 = DIRECTION('',(-1.,0.,0.)); +#187843 = MANIFOLD_SOLID_BREP('',#187844); +#187844 = CLOSED_SHELL('',(#187845,#187885,#187916,#187949,#187980, + #188011,#188042,#188073,#188106,#188128,#188161,#188181)); +#187845 = ADVANCED_FACE('',(#187846),#187880,.T.); +#187846 = FACE_BOUND('',#187847,.T.); +#187847 = EDGE_LOOP('',(#187848,#187858,#187866,#187874)); +#187848 = ORIENTED_EDGE('',*,*,#187849,.T.); +#187849 = EDGE_CURVE('',#187850,#187852,#187854,.T.); +#187850 = VERTEX_POINT('',#187851); +#187851 = CARTESIAN_POINT('',(128.368791,-100.166462,1.51)); +#187852 = VERTEX_POINT('',#187853); +#187853 = CARTESIAN_POINT('',(128.368791,-100.166462,1.545)); +#187854 = LINE('',#187855,#187856); +#187855 = CARTESIAN_POINT('',(128.368791,-100.166462,1.51)); +#187856 = VECTOR('',#187857,1.); +#187857 = DIRECTION('',(0.,0.,1.)); +#187858 = ORIENTED_EDGE('',*,*,#187859,.T.); +#187859 = EDGE_CURVE('',#187852,#187860,#187862,.T.); +#187860 = VERTEX_POINT('',#187861); +#187861 = CARTESIAN_POINT('',(124.35,-104.185255,1.545)); +#187862 = LINE('',#187863,#187864); +#187863 = CARTESIAN_POINT('',(128.368791,-100.166462,1.545)); +#187864 = VECTOR('',#187865,1.); +#187865 = DIRECTION('',(-0.707106605236,-0.707106957137,0.)); +#187866 = ORIENTED_EDGE('',*,*,#187867,.F.); +#187867 = EDGE_CURVE('',#187868,#187860,#187870,.T.); +#187868 = VERTEX_POINT('',#187869); +#187869 = CARTESIAN_POINT('',(124.35,-104.185255,1.51)); +#187870 = LINE('',#187871,#187872); +#187871 = CARTESIAN_POINT('',(124.35,-104.185255,1.51)); +#187872 = VECTOR('',#187873,1.); +#187873 = DIRECTION('',(0.,0.,1.)); +#187874 = ORIENTED_EDGE('',*,*,#187875,.F.); +#187875 = EDGE_CURVE('',#187850,#187868,#187876,.T.); +#187876 = LINE('',#187877,#187878); +#187877 = CARTESIAN_POINT('',(128.368791,-100.166462,1.51)); +#187878 = VECTOR('',#187879,1.); +#187879 = DIRECTION('',(-0.707106605236,-0.707106957137,0.)); +#187880 = PLANE('',#187881); +#187881 = AXIS2_PLACEMENT_3D('',#187882,#187883,#187884); +#187882 = CARTESIAN_POINT('',(128.368791,-100.166462,1.51)); +#187883 = DIRECTION('',(0.707106957137,-0.707106605236,0.)); +#187884 = DIRECTION('',(-0.707106605236,-0.707106957137,0.)); +#187885 = ADVANCED_FACE('',(#187886),#187911,.T.); +#187886 = FACE_BOUND('',#187887,.T.); +#187887 = EDGE_LOOP('',(#187888,#187889,#187897,#187905)); +#187888 = ORIENTED_EDGE('',*,*,#187867,.T.); +#187889 = ORIENTED_EDGE('',*,*,#187890,.T.); +#187890 = EDGE_CURVE('',#187860,#187891,#187893,.T.); +#187891 = VERTEX_POINT('',#187892); +#187892 = CARTESIAN_POINT('',(124.348079,-112.519509,1.545)); +#187893 = LINE('',#187894,#187895); +#187894 = CARTESIAN_POINT('',(124.35,-104.185255,1.545)); +#187895 = VECTOR('',#187896,1.); +#187896 = DIRECTION('',(-2.304945288405E-04,-0.999999973436,0.)); +#187897 = ORIENTED_EDGE('',*,*,#187898,.F.); +#187898 = EDGE_CURVE('',#187899,#187891,#187901,.T.); +#187899 = VERTEX_POINT('',#187900); +#187900 = CARTESIAN_POINT('',(124.348079,-112.519509,1.51)); +#187901 = LINE('',#187902,#187903); +#187902 = CARTESIAN_POINT('',(124.348079,-112.519509,1.51)); +#187903 = VECTOR('',#187904,1.); +#187904 = DIRECTION('',(0.,0.,1.)); +#187905 = ORIENTED_EDGE('',*,*,#187906,.F.); +#187906 = EDGE_CURVE('',#187868,#187899,#187907,.T.); +#187907 = LINE('',#187908,#187909); +#187908 = CARTESIAN_POINT('',(124.35,-104.185255,1.51)); +#187909 = VECTOR('',#187910,1.); +#187910 = DIRECTION('',(-2.304945288405E-04,-0.999999973436,0.)); +#187911 = PLANE('',#187912); +#187912 = AXIS2_PLACEMENT_3D('',#187913,#187914,#187915); +#187913 = CARTESIAN_POINT('',(124.35,-104.185255,1.51)); +#187914 = DIRECTION('',(0.999999973436,-2.304945288405E-04,0.)); +#187915 = DIRECTION('',(-2.304945288405E-04,-0.999999973436,0.)); +#187916 = ADVANCED_FACE('',(#187917),#187944,.T.); +#187917 = FACE_BOUND('',#187918,.T.); +#187918 = EDGE_LOOP('',(#187919,#187920,#187929,#187937)); +#187919 = ORIENTED_EDGE('',*,*,#187898,.T.); +#187920 = ORIENTED_EDGE('',*,*,#187921,.T.); +#187921 = EDGE_CURVE('',#187891,#187922,#187924,.T.); +#187922 = VERTEX_POINT('',#187923); +#187923 = CARTESIAN_POINT('',(124.151921,-112.519509,1.545)); +#187924 = CIRCLE('',#187925,0.100000456609); +#187925 = AXIS2_PLACEMENT_3D('',#187926,#187927,#187928); +#187926 = CARTESIAN_POINT('',(124.25,-112.5,1.545)); +#187927 = DIRECTION('',(-0.,0.,-1.)); +#187928 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#187929 = ORIENTED_EDGE('',*,*,#187930,.F.); +#187930 = EDGE_CURVE('',#187931,#187922,#187933,.T.); +#187931 = VERTEX_POINT('',#187932); +#187932 = CARTESIAN_POINT('',(124.151921,-112.519509,1.51)); +#187933 = LINE('',#187934,#187935); +#187934 = CARTESIAN_POINT('',(124.151921,-112.519509,1.51)); +#187935 = VECTOR('',#187936,1.); +#187936 = DIRECTION('',(0.,0.,1.)); +#187937 = ORIENTED_EDGE('',*,*,#187938,.F.); +#187938 = EDGE_CURVE('',#187899,#187931,#187939,.T.); +#187939 = CIRCLE('',#187940,0.100000456609); +#187940 = AXIS2_PLACEMENT_3D('',#187941,#187942,#187943); +#187941 = CARTESIAN_POINT('',(124.25,-112.5,1.51)); +#187942 = DIRECTION('',(-0.,0.,-1.)); +#187943 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#187944 = CYLINDRICAL_SURFACE('',#187945,0.100000456609); +#187945 = AXIS2_PLACEMENT_3D('',#187946,#187947,#187948); +#187946 = CARTESIAN_POINT('',(124.25,-112.5,1.51)); +#187947 = DIRECTION('',(-0.,0.,-1.)); +#187948 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#187949 = ADVANCED_FACE('',(#187950),#187975,.T.); +#187950 = FACE_BOUND('',#187951,.T.); +#187951 = EDGE_LOOP('',(#187952,#187953,#187961,#187969)); +#187952 = ORIENTED_EDGE('',*,*,#187930,.T.); +#187953 = ORIENTED_EDGE('',*,*,#187954,.T.); +#187954 = EDGE_CURVE('',#187922,#187955,#187957,.T.); +#187955 = VERTEX_POINT('',#187956); +#187956 = CARTESIAN_POINT('',(124.151922,-104.124323,1.545)); +#187957 = LINE('',#187958,#187959); +#187958 = CARTESIAN_POINT('',(124.151921,-112.519509,1.545)); +#187959 = VECTOR('',#187960,1.); +#187960 = DIRECTION('',(1.191158834927E-07,1.,0.)); +#187961 = ORIENTED_EDGE('',*,*,#187962,.F.); +#187962 = EDGE_CURVE('',#187963,#187955,#187965,.T.); +#187963 = VERTEX_POINT('',#187964); +#187964 = CARTESIAN_POINT('',(124.151922,-104.124323,1.51)); +#187965 = LINE('',#187966,#187967); +#187966 = CARTESIAN_POINT('',(124.151922,-104.124323,1.51)); +#187967 = VECTOR('',#187968,1.); +#187968 = DIRECTION('',(0.,0.,1.)); +#187969 = ORIENTED_EDGE('',*,*,#187970,.F.); +#187970 = EDGE_CURVE('',#187931,#187963,#187971,.T.); +#187971 = LINE('',#187972,#187973); +#187972 = CARTESIAN_POINT('',(124.151921,-112.519509,1.51)); +#187973 = VECTOR('',#187974,1.); +#187974 = DIRECTION('',(1.191158834927E-07,1.,0.)); +#187975 = PLANE('',#187976); +#187976 = AXIS2_PLACEMENT_3D('',#187977,#187978,#187979); +#187977 = CARTESIAN_POINT('',(124.151921,-112.519509,1.51)); +#187978 = DIRECTION('',(-1.,1.191158834927E-07,0.)); +#187979 = DIRECTION('',(1.191158834927E-07,1.,0.)); +#187980 = ADVANCED_FACE('',(#187981),#188006,.T.); +#187981 = FACE_BOUND('',#187982,.T.); +#187982 = EDGE_LOOP('',(#187983,#187984,#187992,#188000)); +#187983 = ORIENTED_EDGE('',*,*,#187962,.T.); +#187984 = ORIENTED_EDGE('',*,*,#187985,.T.); +#187985 = EDGE_CURVE('',#187955,#187986,#187988,.T.); +#187986 = VERTEX_POINT('',#187987); +#187987 = CARTESIAN_POINT('',(124.166853,-104.088275,1.545)); +#187988 = LINE('',#187989,#187990); +#187989 = CARTESIAN_POINT('',(124.151922,-104.124323,1.545)); +#187990 = VECTOR('',#187991,1.); +#187991 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#187992 = ORIENTED_EDGE('',*,*,#187993,.F.); +#187993 = EDGE_CURVE('',#187994,#187986,#187996,.T.); +#187994 = VERTEX_POINT('',#187995); +#187995 = CARTESIAN_POINT('',(124.166853,-104.088275,1.51)); +#187996 = LINE('',#187997,#187998); +#187997 = CARTESIAN_POINT('',(124.166853,-104.088275,1.51)); +#187998 = VECTOR('',#187999,1.); +#187999 = DIRECTION('',(0.,0.,1.)); +#188000 = ORIENTED_EDGE('',*,*,#188001,.F.); +#188001 = EDGE_CURVE('',#187963,#187994,#188002,.T.); +#188002 = LINE('',#188003,#188004); +#188003 = CARTESIAN_POINT('',(124.151922,-104.124323,1.51)); +#188004 = VECTOR('',#188005,1.); +#188005 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#188006 = PLANE('',#188007); +#188007 = AXIS2_PLACEMENT_3D('',#188008,#188009,#188010); +#188008 = CARTESIAN_POINT('',(124.151922,-104.124323,1.51)); +#188009 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#188010 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#188011 = ADVANCED_FACE('',(#188012),#188037,.T.); +#188012 = FACE_BOUND('',#188013,.T.); +#188013 = EDGE_LOOP('',(#188014,#188015,#188023,#188031)); +#188014 = ORIENTED_EDGE('',*,*,#187993,.T.); +#188015 = ORIENTED_EDGE('',*,*,#188016,.T.); +#188016 = EDGE_CURVE('',#187986,#188017,#188019,.T.); +#188017 = VERTEX_POINT('',#188018); +#188018 = CARTESIAN_POINT('',(128.203755,-100.048656,1.545)); +#188019 = LINE('',#188020,#188021); +#188020 = CARTESIAN_POINT('',(124.166853,-104.088275,1.545)); +#188021 = VECTOR('',#188022,1.); +#188022 = DIRECTION('',(0.70686886536,0.70734461699,0.)); +#188023 = ORIENTED_EDGE('',*,*,#188024,.F.); +#188024 = EDGE_CURVE('',#188025,#188017,#188027,.T.); +#188025 = VERTEX_POINT('',#188026); +#188026 = CARTESIAN_POINT('',(128.203755,-100.048656,1.51)); +#188027 = LINE('',#188028,#188029); +#188028 = CARTESIAN_POINT('',(128.203755,-100.048656,1.51)); +#188029 = VECTOR('',#188030,1.); +#188030 = DIRECTION('',(0.,0.,1.)); +#188031 = ORIENTED_EDGE('',*,*,#188032,.F.); +#188032 = EDGE_CURVE('',#187994,#188025,#188033,.T.); +#188033 = LINE('',#188034,#188035); +#188034 = CARTESIAN_POINT('',(124.166853,-104.088275,1.51)); +#188035 = VECTOR('',#188036,1.); +#188036 = DIRECTION('',(0.70686886536,0.70734461699,0.)); +#188037 = PLANE('',#188038); +#188038 = AXIS2_PLACEMENT_3D('',#188039,#188040,#188041); +#188039 = CARTESIAN_POINT('',(124.166853,-104.088275,1.51)); +#188040 = DIRECTION('',(-0.70734461699,0.70686886536,0.)); +#188041 = DIRECTION('',(0.70686886536,0.70734461699,0.)); +#188042 = ADVANCED_FACE('',(#188043),#188068,.T.); +#188043 = FACE_BOUND('',#188044,.T.); +#188044 = EDGE_LOOP('',(#188045,#188046,#188054,#188062)); +#188045 = ORIENTED_EDGE('',*,*,#188024,.T.); +#188046 = ORIENTED_EDGE('',*,*,#188047,.T.); +#188047 = EDGE_CURVE('',#188017,#188048,#188050,.T.); +#188048 = VERTEX_POINT('',#188049); +#188049 = CARTESIAN_POINT('',(128.172836,-99.995102,1.545)); +#188050 = LINE('',#188051,#188052); +#188051 = CARTESIAN_POINT('',(128.203755,-100.048656,1.545)); +#188052 = VECTOR('',#188053,1.); +#188053 = DIRECTION('',(-0.499994950767,0.866028318941,0.)); +#188054 = ORIENTED_EDGE('',*,*,#188055,.F.); +#188055 = EDGE_CURVE('',#188056,#188048,#188058,.T.); +#188056 = VERTEX_POINT('',#188057); +#188057 = CARTESIAN_POINT('',(128.172836,-99.995102,1.51)); +#188058 = LINE('',#188059,#188060); +#188059 = CARTESIAN_POINT('',(128.172836,-99.995102,1.51)); +#188060 = VECTOR('',#188061,1.); +#188061 = DIRECTION('',(0.,0.,1.)); +#188062 = ORIENTED_EDGE('',*,*,#188063,.F.); +#188063 = EDGE_CURVE('',#188025,#188056,#188064,.T.); +#188064 = LINE('',#188065,#188066); +#188065 = CARTESIAN_POINT('',(128.203755,-100.048656,1.51)); +#188066 = VECTOR('',#188067,1.); +#188067 = DIRECTION('',(-0.499994950767,0.866028318941,0.)); +#188068 = PLANE('',#188069); +#188069 = AXIS2_PLACEMENT_3D('',#188070,#188071,#188072); +#188070 = CARTESIAN_POINT('',(128.203755,-100.048656,1.51)); +#188071 = DIRECTION('',(-0.866028318941,-0.499994950767,0.)); +#188072 = DIRECTION('',(-0.499994950767,0.866028318941,0.)); +#188073 = ADVANCED_FACE('',(#188074),#188101,.T.); +#188074 = FACE_BOUND('',#188075,.T.); +#188075 = EDGE_LOOP('',(#188076,#188077,#188086,#188094)); +#188076 = ORIENTED_EDGE('',*,*,#188055,.T.); +#188077 = ORIENTED_EDGE('',*,*,#188078,.T.); +#188078 = EDGE_CURVE('',#188048,#188079,#188081,.T.); +#188079 = VERTEX_POINT('',#188080); +#188080 = CARTESIAN_POINT('',(128.410842,-100.17773,1.545)); +#188081 = CIRCLE('',#188082,0.299999472923); +#188082 = AXIS2_PLACEMENT_3D('',#188083,#188084,#188085); +#188083 = CARTESIAN_POINT('',(128.44999930155,-99.880297,1.545)); +#188084 = DIRECTION('',(0.,0.,-1.)); +#188085 = DIRECTION('',(-0.923879295036,-0.38268400568,-0.)); +#188086 = ORIENTED_EDGE('',*,*,#188087,.F.); +#188087 = EDGE_CURVE('',#188088,#188079,#188090,.T.); +#188088 = VERTEX_POINT('',#188089); +#188089 = CARTESIAN_POINT('',(128.410842,-100.17773,1.51)); +#188090 = LINE('',#188091,#188092); +#188091 = CARTESIAN_POINT('',(128.410842,-100.17773,1.51)); +#188092 = VECTOR('',#188093,1.); +#188093 = DIRECTION('',(0.,0.,1.)); +#188094 = ORIENTED_EDGE('',*,*,#188095,.F.); +#188095 = EDGE_CURVE('',#188056,#188088,#188096,.T.); +#188096 = CIRCLE('',#188097,0.299999472923); +#188097 = AXIS2_PLACEMENT_3D('',#188098,#188099,#188100); +#188098 = CARTESIAN_POINT('',(128.44999930155,-99.880297,1.51)); +#188099 = DIRECTION('',(0.,0.,-1.)); +#188100 = DIRECTION('',(-0.923879295036,-0.38268400568,-0.)); +#188101 = CYLINDRICAL_SURFACE('',#188102,0.299999472923); +#188102 = AXIS2_PLACEMENT_3D('',#188103,#188104,#188105); +#188103 = CARTESIAN_POINT('',(128.44999930155,-99.880297,1.51)); +#188104 = DIRECTION('',(0.,0.,-1.)); +#188105 = DIRECTION('',(-0.923879295036,-0.38268400568,-0.)); +#188106 = ADVANCED_FACE('',(#188107),#188123,.T.); +#188107 = FACE_BOUND('',#188108,.T.); +#188108 = EDGE_LOOP('',(#188109,#188110,#188116,#188117)); +#188109 = ORIENTED_EDGE('',*,*,#188087,.T.); +#188110 = ORIENTED_EDGE('',*,*,#188111,.T.); +#188111 = EDGE_CURVE('',#188079,#187852,#188112,.T.); +#188112 = LINE('',#188113,#188114); +#188113 = CARTESIAN_POINT('',(128.410842,-100.17773,1.545)); +#188114 = VECTOR('',#188115,1.); +#188115 = DIRECTION('',(-0.965923135791,0.258829085969,0.)); +#188116 = ORIENTED_EDGE('',*,*,#187849,.F.); +#188117 = ORIENTED_EDGE('',*,*,#188118,.F.); +#188118 = EDGE_CURVE('',#188088,#187850,#188119,.T.); +#188119 = LINE('',#188120,#188121); +#188120 = CARTESIAN_POINT('',(128.410842,-100.17773,1.51)); +#188121 = VECTOR('',#188122,1.); +#188122 = DIRECTION('',(-0.965923135791,0.258829085969,0.)); +#188123 = PLANE('',#188124); +#188124 = AXIS2_PLACEMENT_3D('',#188125,#188126,#188127); +#188125 = CARTESIAN_POINT('',(128.410842,-100.17773,1.51)); +#188126 = DIRECTION('',(-0.258829085969,-0.965923135791,0.)); +#188127 = DIRECTION('',(-0.965923135791,0.258829085969,0.)); +#188128 = ADVANCED_FACE('',(#188129),#188156,.F.); +#188129 = FACE_BOUND('',#188130,.T.); +#188130 = EDGE_LOOP('',(#188131,#188141,#188148,#188149)); +#188131 = ORIENTED_EDGE('',*,*,#188132,.T.); +#188132 = EDGE_CURVE('',#188133,#188135,#188137,.T.); +#188133 = VERTEX_POINT('',#188134); +#188134 = CARTESIAN_POINT('',(128.587255,-99.880297,1.51)); +#188135 = VERTEX_POINT('',#188136); +#188136 = CARTESIAN_POINT('',(128.587255,-99.880297,1.545)); +#188137 = LINE('',#188138,#188139); +#188138 = CARTESIAN_POINT('',(128.587255,-99.880297,1.51)); +#188139 = VECTOR('',#188140,1.); +#188140 = DIRECTION('',(0.,0.,1.)); +#188141 = ORIENTED_EDGE('',*,*,#188142,.T.); +#188142 = EDGE_CURVE('',#188135,#188135,#188143,.T.); +#188143 = CIRCLE('',#188144,0.137255); +#188144 = AXIS2_PLACEMENT_3D('',#188145,#188146,#188147); +#188145 = CARTESIAN_POINT('',(128.45,-99.880297,1.545)); +#188146 = DIRECTION('',(0.,0.,1.)); +#188147 = DIRECTION('',(1.,0.,-0.)); +#188148 = ORIENTED_EDGE('',*,*,#188132,.F.); +#188149 = ORIENTED_EDGE('',*,*,#188150,.F.); +#188150 = EDGE_CURVE('',#188133,#188133,#188151,.T.); +#188151 = CIRCLE('',#188152,0.137255); +#188152 = AXIS2_PLACEMENT_3D('',#188153,#188154,#188155); +#188153 = CARTESIAN_POINT('',(128.45,-99.880297,1.51)); +#188154 = DIRECTION('',(0.,0.,1.)); +#188155 = DIRECTION('',(1.,0.,-0.)); +#188156 = CYLINDRICAL_SURFACE('',#188157,0.137255); +#188157 = AXIS2_PLACEMENT_3D('',#188158,#188159,#188160); +#188158 = CARTESIAN_POINT('',(128.45,-99.880297,1.51)); +#188159 = DIRECTION('',(-0.,-0.,-1.)); +#188160 = DIRECTION('',(1.,0.,-0.)); +#188161 = ADVANCED_FACE('',(#188162,#188173),#188176,.F.); +#188162 = FACE_BOUND('',#188163,.T.); +#188163 = EDGE_LOOP('',(#188164,#188165,#188166,#188167,#188168,#188169, + #188170,#188171,#188172)); +#188164 = ORIENTED_EDGE('',*,*,#187875,.T.); +#188165 = ORIENTED_EDGE('',*,*,#187906,.T.); +#188166 = ORIENTED_EDGE('',*,*,#187938,.T.); +#188167 = ORIENTED_EDGE('',*,*,#187970,.T.); +#188168 = ORIENTED_EDGE('',*,*,#188001,.T.); +#188169 = ORIENTED_EDGE('',*,*,#188032,.T.); +#188170 = ORIENTED_EDGE('',*,*,#188063,.T.); +#188171 = ORIENTED_EDGE('',*,*,#188095,.T.); +#188172 = ORIENTED_EDGE('',*,*,#188118,.T.); +#188173 = FACE_BOUND('',#188174,.T.); +#188174 = EDGE_LOOP('',(#188175)); +#188175 = ORIENTED_EDGE('',*,*,#188150,.T.); +#188176 = PLANE('',#188177); +#188177 = AXIS2_PLACEMENT_3D('',#188178,#188179,#188180); +#188178 = CARTESIAN_POINT('',(0.,0.,1.51)); +#188179 = DIRECTION('',(0.,0.,1.)); +#188180 = DIRECTION('',(1.,0.,-0.)); +#188181 = ADVANCED_FACE('',(#188182,#188193),#188196,.T.); +#188182 = FACE_BOUND('',#188183,.F.); +#188183 = EDGE_LOOP('',(#188184,#188185,#188186,#188187,#188188,#188189, + #188190,#188191,#188192)); +#188184 = ORIENTED_EDGE('',*,*,#187859,.T.); +#188185 = ORIENTED_EDGE('',*,*,#187890,.T.); +#188186 = ORIENTED_EDGE('',*,*,#187921,.T.); +#188187 = ORIENTED_EDGE('',*,*,#187954,.T.); +#188188 = ORIENTED_EDGE('',*,*,#187985,.T.); +#188189 = ORIENTED_EDGE('',*,*,#188016,.T.); +#188190 = ORIENTED_EDGE('',*,*,#188047,.T.); +#188191 = ORIENTED_EDGE('',*,*,#188078,.T.); +#188192 = ORIENTED_EDGE('',*,*,#188111,.T.); +#188193 = FACE_BOUND('',#188194,.F.); +#188194 = EDGE_LOOP('',(#188195)); +#188195 = ORIENTED_EDGE('',*,*,#188142,.T.); +#188196 = PLANE('',#188197); +#188197 = AXIS2_PLACEMENT_3D('',#188198,#188199,#188200); +#188198 = CARTESIAN_POINT('',(0.,0.,1.545)); +#188199 = DIRECTION('',(0.,0.,1.)); +#188200 = DIRECTION('',(1.,0.,-0.)); +#188201 = MANIFOLD_SOLID_BREP('',#188202); +#188202 = CLOSED_SHELL('',(#188203,#188243,#188274,#188305,#188336, + #188369,#188400,#188431,#188462,#188493,#188526,#188548,#188581, + #188614,#188639)); +#188203 = ADVANCED_FACE('',(#188204),#188238,.T.); +#188204 = FACE_BOUND('',#188205,.T.); +#188205 = EDGE_LOOP('',(#188206,#188216,#188224,#188232)); +#188206 = ORIENTED_EDGE('',*,*,#188207,.T.); +#188207 = EDGE_CURVE('',#188208,#188210,#188212,.T.); +#188208 = VERTEX_POINT('',#188209); +#188209 = CARTESIAN_POINT('',(136.318838,-92.216417,1.51)); +#188210 = VERTEX_POINT('',#188211); +#188211 = CARTESIAN_POINT('',(136.318838,-92.216417,1.545)); +#188212 = LINE('',#188213,#188214); +#188213 = CARTESIAN_POINT('',(136.318838,-92.216417,1.51)); +#188214 = VECTOR('',#188215,1.); +#188215 = DIRECTION('',(0.,0.,1.)); +#188216 = ORIENTED_EDGE('',*,*,#188217,.T.); +#188217 = EDGE_CURVE('',#188210,#188218,#188220,.T.); +#188218 = VERTEX_POINT('',#188219); +#188219 = CARTESIAN_POINT('',(134.049391,-94.483147,1.545)); +#188220 = LINE('',#188221,#188222); +#188221 = CARTESIAN_POINT('',(136.318838,-92.216417,1.545)); +#188222 = VECTOR('',#188223,1.); +#188223 = DIRECTION('',(-0.70753018473,-0.706683123965,0.)); +#188224 = ORIENTED_EDGE('',*,*,#188225,.F.); +#188225 = EDGE_CURVE('',#188226,#188218,#188228,.T.); +#188226 = VERTEX_POINT('',#188227); +#188227 = CARTESIAN_POINT('',(134.049391,-94.483147,1.51)); +#188228 = LINE('',#188229,#188230); +#188229 = CARTESIAN_POINT('',(134.049391,-94.483147,1.51)); +#188230 = VECTOR('',#188231,1.); +#188231 = DIRECTION('',(0.,0.,1.)); +#188232 = ORIENTED_EDGE('',*,*,#188233,.F.); +#188233 = EDGE_CURVE('',#188208,#188226,#188234,.T.); +#188234 = LINE('',#188235,#188236); +#188235 = CARTESIAN_POINT('',(136.318838,-92.216417,1.51)); +#188236 = VECTOR('',#188237,1.); +#188237 = DIRECTION('',(-0.70753018473,-0.706683123965,0.)); +#188238 = PLANE('',#188239); +#188239 = AXIS2_PLACEMENT_3D('',#188240,#188241,#188242); +#188240 = CARTESIAN_POINT('',(136.318838,-92.216417,1.51)); +#188241 = DIRECTION('',(0.706683123965,-0.70753018473,0.)); +#188242 = DIRECTION('',(-0.70753018473,-0.706683123965,0.)); +#188243 = ADVANCED_FACE('',(#188244),#188269,.T.); +#188244 = FACE_BOUND('',#188245,.T.); +#188245 = EDGE_LOOP('',(#188246,#188247,#188255,#188263)); +#188246 = ORIENTED_EDGE('',*,*,#188225,.T.); +#188247 = ORIENTED_EDGE('',*,*,#188248,.T.); +#188248 = EDGE_CURVE('',#188218,#188249,#188251,.T.); +#188249 = VERTEX_POINT('',#188250); +#188250 = CARTESIAN_POINT('',(134.013343,-94.498079,1.545)); +#188251 = LINE('',#188252,#188253); +#188252 = CARTESIAN_POINT('',(134.049391,-94.483147,1.545)); +#188253 = VECTOR('',#188254,1.); +#188254 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#188255 = ORIENTED_EDGE('',*,*,#188256,.F.); +#188256 = EDGE_CURVE('',#188257,#188249,#188259,.T.); +#188257 = VERTEX_POINT('',#188258); +#188258 = CARTESIAN_POINT('',(134.013343,-94.498079,1.51)); +#188259 = LINE('',#188260,#188261); +#188260 = CARTESIAN_POINT('',(134.013343,-94.498079,1.51)); +#188261 = VECTOR('',#188262,1.); +#188262 = DIRECTION('',(0.,0.,1.)); +#188263 = ORIENTED_EDGE('',*,*,#188264,.F.); +#188264 = EDGE_CURVE('',#188226,#188257,#188265,.T.); +#188265 = LINE('',#188266,#188267); +#188266 = CARTESIAN_POINT('',(134.049391,-94.483147,1.51)); +#188267 = VECTOR('',#188268,1.); +#188268 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#188269 = PLANE('',#188270); +#188270 = AXIS2_PLACEMENT_3D('',#188271,#188272,#188273); +#188271 = CARTESIAN_POINT('',(134.049391,-94.483147,1.51)); +#188272 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#188273 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#188274 = ADVANCED_FACE('',(#188275),#188300,.T.); +#188275 = FACE_BOUND('',#188276,.T.); +#188276 = EDGE_LOOP('',(#188277,#188278,#188286,#188294)); +#188277 = ORIENTED_EDGE('',*,*,#188256,.T.); +#188278 = ORIENTED_EDGE('',*,*,#188279,.T.); +#188279 = EDGE_CURVE('',#188249,#188280,#188282,.T.); +#188280 = VERTEX_POINT('',#188281); +#188281 = CARTESIAN_POINT('',(133.581131,-94.5,1.545)); +#188282 = LINE('',#188283,#188284); +#188283 = CARTESIAN_POINT('',(134.013343,-94.498079,1.545)); +#188284 = VECTOR('',#188285,1.); +#188285 = DIRECTION('',(-0.999990123009,-4.444534224631E-03,0.)); +#188286 = ORIENTED_EDGE('',*,*,#188287,.F.); +#188287 = EDGE_CURVE('',#188288,#188280,#188290,.T.); +#188288 = VERTEX_POINT('',#188289); +#188289 = CARTESIAN_POINT('',(133.581131,-94.5,1.51)); +#188290 = LINE('',#188291,#188292); +#188291 = CARTESIAN_POINT('',(133.581131,-94.5,1.51)); +#188292 = VECTOR('',#188293,1.); +#188293 = DIRECTION('',(0.,0.,1.)); +#188294 = ORIENTED_EDGE('',*,*,#188295,.F.); +#188295 = EDGE_CURVE('',#188257,#188288,#188296,.T.); +#188296 = LINE('',#188297,#188298); +#188297 = CARTESIAN_POINT('',(134.013343,-94.498079,1.51)); +#188298 = VECTOR('',#188299,1.); +#188299 = DIRECTION('',(-0.999990123009,-4.444534224631E-03,0.)); +#188300 = PLANE('',#188301); +#188301 = AXIS2_PLACEMENT_3D('',#188302,#188303,#188304); +#188302 = CARTESIAN_POINT('',(134.013343,-94.498079,1.51)); +#188303 = DIRECTION('',(4.444534224631E-03,-0.999990123009,0.)); +#188304 = DIRECTION('',(-0.999990123009,-4.444534224631E-03,0.)); +#188305 = ADVANCED_FACE('',(#188306),#188331,.T.); +#188306 = FACE_BOUND('',#188307,.T.); +#188307 = EDGE_LOOP('',(#188308,#188309,#188317,#188325)); +#188308 = ORIENTED_EDGE('',*,*,#188287,.T.); +#188309 = ORIENTED_EDGE('',*,*,#188310,.T.); +#188310 = EDGE_CURVE('',#188280,#188311,#188313,.T.); +#188311 = VERTEX_POINT('',#188312); +#188312 = CARTESIAN_POINT('',(133.577164,-94.514805,1.545)); +#188313 = LINE('',#188314,#188315); +#188314 = CARTESIAN_POINT('',(133.581131,-94.5,1.545)); +#188315 = VECTOR('',#188316,1.); +#188316 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#188317 = ORIENTED_EDGE('',*,*,#188318,.F.); +#188318 = EDGE_CURVE('',#188319,#188311,#188321,.T.); +#188319 = VERTEX_POINT('',#188320); +#188320 = CARTESIAN_POINT('',(133.577164,-94.514805,1.51)); +#188321 = LINE('',#188322,#188323); +#188322 = CARTESIAN_POINT('',(133.577164,-94.514805,1.51)); +#188323 = VECTOR('',#188324,1.); +#188324 = DIRECTION('',(0.,0.,1.)); +#188325 = ORIENTED_EDGE('',*,*,#188326,.F.); +#188326 = EDGE_CURVE('',#188288,#188319,#188327,.T.); +#188327 = LINE('',#188328,#188329); +#188328 = CARTESIAN_POINT('',(133.581131,-94.5,1.51)); +#188329 = VECTOR('',#188330,1.); +#188330 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#188331 = PLANE('',#188332); +#188332 = AXIS2_PLACEMENT_3D('',#188333,#188334,#188335); +#188333 = CARTESIAN_POINT('',(133.581131,-94.5,1.51)); +#188334 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#188335 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#188336 = ADVANCED_FACE('',(#188337),#188364,.T.); +#188337 = FACE_BOUND('',#188338,.T.); +#188338 = EDGE_LOOP('',(#188339,#188340,#188349,#188357)); +#188339 = ORIENTED_EDGE('',*,*,#188318,.T.); +#188340 = ORIENTED_EDGE('',*,*,#188341,.T.); +#188341 = EDGE_CURVE('',#188311,#188342,#188344,.T.); +#188342 = VERTEX_POINT('',#188343); +#188343 = CARTESIAN_POINT('',(133.577164,-94.285195,1.545)); +#188344 = CIRCLE('',#188345,0.299999850918); +#188345 = AXIS2_PLACEMENT_3D('',#188346,#188347,#188348); +#188346 = CARTESIAN_POINT('',(133.3000002893,-94.4,1.545)); +#188347 = DIRECTION('',(0.,0.,-1.)); +#188348 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#188349 = ORIENTED_EDGE('',*,*,#188350,.F.); +#188350 = EDGE_CURVE('',#188351,#188342,#188353,.T.); +#188351 = VERTEX_POINT('',#188352); +#188352 = CARTESIAN_POINT('',(133.577164,-94.285195,1.51)); +#188353 = LINE('',#188354,#188355); +#188354 = CARTESIAN_POINT('',(133.577164,-94.285195,1.51)); +#188355 = VECTOR('',#188356,1.); +#188356 = DIRECTION('',(0.,0.,1.)); +#188357 = ORIENTED_EDGE('',*,*,#188358,.F.); +#188358 = EDGE_CURVE('',#188319,#188351,#188359,.T.); +#188359 = CIRCLE('',#188360,0.299999850918); +#188360 = AXIS2_PLACEMENT_3D('',#188361,#188362,#188363); +#188361 = CARTESIAN_POINT('',(133.3000002893,-94.4,1.51)); +#188362 = DIRECTION('',(0.,0.,-1.)); +#188363 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#188364 = CYLINDRICAL_SURFACE('',#188365,0.299999850918); +#188365 = AXIS2_PLACEMENT_3D('',#188366,#188367,#188368); +#188366 = CARTESIAN_POINT('',(133.3000002893,-94.4,1.51)); +#188367 = DIRECTION('',(0.,0.,-1.)); +#188368 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#188369 = ADVANCED_FACE('',(#188370),#188395,.T.); +#188370 = FACE_BOUND('',#188371,.T.); +#188371 = EDGE_LOOP('',(#188372,#188373,#188381,#188389)); +#188372 = ORIENTED_EDGE('',*,*,#188350,.T.); +#188373 = ORIENTED_EDGE('',*,*,#188374,.T.); +#188374 = EDGE_CURVE('',#188342,#188375,#188377,.T.); +#188375 = VERTEX_POINT('',#188376); +#188376 = CARTESIAN_POINT('',(133.581131,-94.3,1.545)); +#188377 = LINE('',#188378,#188379); +#188378 = CARTESIAN_POINT('',(133.577164,-94.285195,1.545)); +#188379 = VECTOR('',#188380,1.); +#188380 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#188381 = ORIENTED_EDGE('',*,*,#188382,.F.); +#188382 = EDGE_CURVE('',#188383,#188375,#188385,.T.); +#188383 = VERTEX_POINT('',#188384); +#188384 = CARTESIAN_POINT('',(133.581131,-94.3,1.51)); +#188385 = LINE('',#188386,#188387); +#188386 = CARTESIAN_POINT('',(133.581131,-94.3,1.51)); +#188387 = VECTOR('',#188388,1.); +#188388 = DIRECTION('',(0.,0.,1.)); +#188389 = ORIENTED_EDGE('',*,*,#188390,.F.); +#188390 = EDGE_CURVE('',#188351,#188383,#188391,.T.); +#188391 = LINE('',#188392,#188393); +#188392 = CARTESIAN_POINT('',(133.577164,-94.285195,1.51)); +#188393 = VECTOR('',#188394,1.); +#188394 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#188395 = PLANE('',#188396); +#188396 = AXIS2_PLACEMENT_3D('',#188397,#188398,#188399); +#188397 = CARTESIAN_POINT('',(133.577164,-94.285195,1.51)); +#188398 = DIRECTION('',(0.965925627198,0.258819788118,-0.)); +#188399 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#188400 = ADVANCED_FACE('',(#188401),#188426,.T.); +#188401 = FACE_BOUND('',#188402,.T.); +#188402 = EDGE_LOOP('',(#188403,#188404,#188412,#188420)); +#188403 = ORIENTED_EDGE('',*,*,#188382,.T.); +#188404 = ORIENTED_EDGE('',*,*,#188405,.T.); +#188405 = EDGE_CURVE('',#188375,#188406,#188408,.T.); +#188406 = VERTEX_POINT('',#188407); +#188407 = CARTESIAN_POINT('',(133.952412,-94.3,1.545)); +#188408 = LINE('',#188409,#188410); +#188409 = CARTESIAN_POINT('',(133.581131,-94.3,1.545)); +#188410 = VECTOR('',#188411,1.); +#188411 = DIRECTION('',(1.,0.,0.)); +#188412 = ORIENTED_EDGE('',*,*,#188413,.F.); +#188413 = EDGE_CURVE('',#188414,#188406,#188416,.T.); +#188414 = VERTEX_POINT('',#188415); +#188415 = CARTESIAN_POINT('',(133.952412,-94.3,1.51)); +#188416 = LINE('',#188417,#188418); +#188417 = CARTESIAN_POINT('',(133.952412,-94.3,1.51)); +#188418 = VECTOR('',#188419,1.); +#188419 = DIRECTION('',(0.,0.,1.)); +#188420 = ORIENTED_EDGE('',*,*,#188421,.F.); +#188421 = EDGE_CURVE('',#188383,#188414,#188422,.T.); +#188422 = LINE('',#188423,#188424); +#188423 = CARTESIAN_POINT('',(133.581131,-94.3,1.51)); +#188424 = VECTOR('',#188425,1.); +#188425 = DIRECTION('',(1.,0.,0.)); +#188426 = PLANE('',#188427); +#188427 = AXIS2_PLACEMENT_3D('',#188428,#188429,#188430); +#188428 = CARTESIAN_POINT('',(133.581131,-94.3,1.51)); +#188429 = DIRECTION('',(0.,1.,0.)); +#188430 = DIRECTION('',(1.,0.,0.)); +#188431 = ADVANCED_FACE('',(#188432),#188457,.T.); +#188432 = FACE_BOUND('',#188433,.T.); +#188433 = EDGE_LOOP('',(#188434,#188435,#188443,#188451)); +#188434 = ORIENTED_EDGE('',*,*,#188413,.T.); +#188435 = ORIENTED_EDGE('',*,*,#188436,.T.); +#188436 = EDGE_CURVE('',#188406,#188437,#188439,.T.); +#188437 = VERTEX_POINT('',#188438); +#188438 = CARTESIAN_POINT('',(136.177416,-92.074995,1.545)); +#188439 = LINE('',#188440,#188441); +#188440 = CARTESIAN_POINT('',(133.952412,-94.3,1.545)); +#188441 = VECTOR('',#188442,1.); +#188442 = DIRECTION('',(0.707106622286,0.707106940087,0.)); +#188443 = ORIENTED_EDGE('',*,*,#188444,.F.); +#188444 = EDGE_CURVE('',#188445,#188437,#188447,.T.); +#188445 = VERTEX_POINT('',#188446); +#188446 = CARTESIAN_POINT('',(136.177416,-92.074995,1.51)); +#188447 = LINE('',#188448,#188449); +#188448 = CARTESIAN_POINT('',(136.177416,-92.074995,1.51)); +#188449 = VECTOR('',#188450,1.); +#188450 = DIRECTION('',(0.,0.,1.)); +#188451 = ORIENTED_EDGE('',*,*,#188452,.F.); +#188452 = EDGE_CURVE('',#188414,#188445,#188453,.T.); +#188453 = LINE('',#188454,#188455); +#188454 = CARTESIAN_POINT('',(133.952412,-94.3,1.51)); +#188455 = VECTOR('',#188456,1.); +#188456 = DIRECTION('',(0.707106622286,0.707106940087,0.)); +#188457 = PLANE('',#188458); +#188458 = AXIS2_PLACEMENT_3D('',#188459,#188460,#188461); +#188459 = CARTESIAN_POINT('',(133.952412,-94.3,1.51)); +#188460 = DIRECTION('',(-0.707106940087,0.707106622286,0.)); +#188461 = DIRECTION('',(0.707106622286,0.707106940087,0.)); +#188462 = ADVANCED_FACE('',(#188463),#188488,.T.); +#188463 = FACE_BOUND('',#188464,.T.); +#188464 = EDGE_LOOP('',(#188465,#188466,#188474,#188482)); +#188465 = ORIENTED_EDGE('',*,*,#188444,.T.); +#188466 = ORIENTED_EDGE('',*,*,#188467,.T.); +#188467 = EDGE_CURVE('',#188437,#188468,#188470,.T.); +#188468 = VERTEX_POINT('',#188469); +#188469 = CARTESIAN_POINT('',(136.169753,-92.061722,1.545)); +#188470 = LINE('',#188471,#188472); +#188471 = CARTESIAN_POINT('',(136.177416,-92.074995,1.545)); +#188472 = VECTOR('',#188473,1.); +#188473 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#188474 = ORIENTED_EDGE('',*,*,#188475,.F.); +#188475 = EDGE_CURVE('',#188476,#188468,#188478,.T.); +#188476 = VERTEX_POINT('',#188477); +#188477 = CARTESIAN_POINT('',(136.169753,-92.061722,1.51)); +#188478 = LINE('',#188479,#188480); +#188479 = CARTESIAN_POINT('',(136.169753,-92.061722,1.51)); +#188480 = VECTOR('',#188481,1.); +#188481 = DIRECTION('',(0.,0.,1.)); +#188482 = ORIENTED_EDGE('',*,*,#188483,.F.); +#188483 = EDGE_CURVE('',#188445,#188476,#188484,.T.); +#188484 = LINE('',#188485,#188486); +#188485 = CARTESIAN_POINT('',(136.177416,-92.074995,1.51)); +#188486 = VECTOR('',#188487,1.); +#188487 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#188488 = PLANE('',#188489); +#188489 = AXIS2_PLACEMENT_3D('',#188490,#188491,#188492); +#188490 = CARTESIAN_POINT('',(136.177416,-92.074995,1.51)); +#188491 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#188492 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#188493 = ADVANCED_FACE('',(#188494),#188521,.T.); +#188494 = FACE_BOUND('',#188495,.T.); +#188495 = EDGE_LOOP('',(#188496,#188497,#188506,#188514)); +#188496 = ORIENTED_EDGE('',*,*,#188475,.T.); +#188497 = ORIENTED_EDGE('',*,*,#188498,.T.); +#188498 = EDGE_CURVE('',#188468,#188499,#188501,.T.); +#188499 = VERTEX_POINT('',#188500); +#188500 = CARTESIAN_POINT('',(136.332112,-92.224081,1.545)); +#188501 = CIRCLE('',#188502,0.300000118202); +#188502 = AXIS2_PLACEMENT_3D('',#188503,#188504,#188505); +#188503 = CARTESIAN_POINT('',(136.446917,-91.946917,1.545)); +#188504 = DIRECTION('',(0.,0.,-1.)); +#188505 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#188506 = ORIENTED_EDGE('',*,*,#188507,.F.); +#188507 = EDGE_CURVE('',#188508,#188499,#188510,.T.); +#188508 = VERTEX_POINT('',#188509); +#188509 = CARTESIAN_POINT('',(136.332112,-92.224081,1.51)); +#188510 = LINE('',#188511,#188512); +#188511 = CARTESIAN_POINT('',(136.332112,-92.224081,1.51)); +#188512 = VECTOR('',#188513,1.); +#188513 = DIRECTION('',(0.,0.,1.)); +#188514 = ORIENTED_EDGE('',*,*,#188515,.F.); +#188515 = EDGE_CURVE('',#188476,#188508,#188516,.T.); +#188516 = CIRCLE('',#188517,0.300000118202); +#188517 = AXIS2_PLACEMENT_3D('',#188518,#188519,#188520); +#188518 = CARTESIAN_POINT('',(136.446917,-91.946917,1.51)); +#188519 = DIRECTION('',(0.,0.,-1.)); +#188520 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#188521 = CYLINDRICAL_SURFACE('',#188522,0.300000118202); +#188522 = AXIS2_PLACEMENT_3D('',#188523,#188524,#188525); +#188523 = CARTESIAN_POINT('',(136.446917,-91.946917,1.51)); +#188524 = DIRECTION('',(0.,0.,-1.)); +#188525 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#188526 = ADVANCED_FACE('',(#188527),#188543,.T.); +#188527 = FACE_BOUND('',#188528,.T.); +#188528 = EDGE_LOOP('',(#188529,#188530,#188536,#188537)); +#188529 = ORIENTED_EDGE('',*,*,#188507,.T.); +#188530 = ORIENTED_EDGE('',*,*,#188531,.T.); +#188531 = EDGE_CURVE('',#188499,#188210,#188532,.T.); +#188532 = LINE('',#188533,#188534); +#188533 = CARTESIAN_POINT('',(136.332112,-92.224081,1.545)); +#188534 = VECTOR('',#188535,1.); +#188535 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#188536 = ORIENTED_EDGE('',*,*,#188207,.F.); +#188537 = ORIENTED_EDGE('',*,*,#188538,.F.); +#188538 = EDGE_CURVE('',#188508,#188208,#188539,.T.); +#188539 = LINE('',#188540,#188541); +#188540 = CARTESIAN_POINT('',(136.332112,-92.224081,1.51)); +#188541 = VECTOR('',#188542,1.); +#188542 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#188543 = PLANE('',#188544); +#188544 = AXIS2_PLACEMENT_3D('',#188545,#188546,#188547); +#188545 = CARTESIAN_POINT('',(136.332112,-92.224081,1.51)); +#188546 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#188547 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#188548 = ADVANCED_FACE('',(#188549),#188576,.F.); +#188549 = FACE_BOUND('',#188550,.T.); +#188550 = EDGE_LOOP('',(#188551,#188561,#188568,#188569)); +#188551 = ORIENTED_EDGE('',*,*,#188552,.T.); +#188552 = EDGE_CURVE('',#188553,#188555,#188557,.T.); +#188553 = VERTEX_POINT('',#188554); +#188554 = CARTESIAN_POINT('',(133.437255,-94.4,1.51)); +#188555 = VERTEX_POINT('',#188556); +#188556 = CARTESIAN_POINT('',(133.437255,-94.4,1.545)); +#188557 = LINE('',#188558,#188559); +#188558 = CARTESIAN_POINT('',(133.437255,-94.4,1.51)); +#188559 = VECTOR('',#188560,1.); +#188560 = DIRECTION('',(0.,0.,1.)); +#188561 = ORIENTED_EDGE('',*,*,#188562,.T.); +#188562 = EDGE_CURVE('',#188555,#188555,#188563,.T.); +#188563 = CIRCLE('',#188564,0.137255); +#188564 = AXIS2_PLACEMENT_3D('',#188565,#188566,#188567); +#188565 = CARTESIAN_POINT('',(133.3,-94.4,1.545)); +#188566 = DIRECTION('',(0.,0.,1.)); +#188567 = DIRECTION('',(1.,0.,-0.)); +#188568 = ORIENTED_EDGE('',*,*,#188552,.F.); +#188569 = ORIENTED_EDGE('',*,*,#188570,.F.); +#188570 = EDGE_CURVE('',#188553,#188553,#188571,.T.); +#188571 = CIRCLE('',#188572,0.137255); +#188572 = AXIS2_PLACEMENT_3D('',#188573,#188574,#188575); +#188573 = CARTESIAN_POINT('',(133.3,-94.4,1.51)); +#188574 = DIRECTION('',(0.,0.,1.)); +#188575 = DIRECTION('',(1.,0.,-0.)); +#188576 = CYLINDRICAL_SURFACE('',#188577,0.137255); +#188577 = AXIS2_PLACEMENT_3D('',#188578,#188579,#188580); +#188578 = CARTESIAN_POINT('',(133.3,-94.4,1.51)); +#188579 = DIRECTION('',(-0.,-0.,-1.)); +#188580 = DIRECTION('',(1.,0.,-0.)); +#188581 = ADVANCED_FACE('',(#188582),#188609,.F.); +#188582 = FACE_BOUND('',#188583,.T.); +#188583 = EDGE_LOOP('',(#188584,#188594,#188601,#188602)); +#188584 = ORIENTED_EDGE('',*,*,#188585,.T.); +#188585 = EDGE_CURVE('',#188586,#188588,#188590,.T.); +#188586 = VERTEX_POINT('',#188587); +#188587 = CARTESIAN_POINT('',(136.584172,-91.946917,1.51)); +#188588 = VERTEX_POINT('',#188589); +#188589 = CARTESIAN_POINT('',(136.584172,-91.946917,1.545)); +#188590 = LINE('',#188591,#188592); +#188591 = CARTESIAN_POINT('',(136.584172,-91.946917,1.51)); +#188592 = VECTOR('',#188593,1.); +#188593 = DIRECTION('',(0.,0.,1.)); +#188594 = ORIENTED_EDGE('',*,*,#188595,.T.); +#188595 = EDGE_CURVE('',#188588,#188588,#188596,.T.); +#188596 = CIRCLE('',#188597,0.137255); +#188597 = AXIS2_PLACEMENT_3D('',#188598,#188599,#188600); +#188598 = CARTESIAN_POINT('',(136.446917,-91.946917,1.545)); +#188599 = DIRECTION('',(0.,0.,1.)); +#188600 = DIRECTION('',(1.,0.,-0.)); +#188601 = ORIENTED_EDGE('',*,*,#188585,.F.); +#188602 = ORIENTED_EDGE('',*,*,#188603,.F.); +#188603 = EDGE_CURVE('',#188586,#188586,#188604,.T.); +#188604 = CIRCLE('',#188605,0.137255); +#188605 = AXIS2_PLACEMENT_3D('',#188606,#188607,#188608); +#188606 = CARTESIAN_POINT('',(136.446917,-91.946917,1.51)); +#188607 = DIRECTION('',(0.,0.,1.)); +#188608 = DIRECTION('',(1.,0.,-0.)); +#188609 = CYLINDRICAL_SURFACE('',#188610,0.137255); +#188610 = AXIS2_PLACEMENT_3D('',#188611,#188612,#188613); +#188611 = CARTESIAN_POINT('',(136.446917,-91.946917,1.51)); +#188612 = DIRECTION('',(-0.,-0.,-1.)); +#188613 = DIRECTION('',(1.,0.,-0.)); +#188614 = ADVANCED_FACE('',(#188615,#188628,#188631),#188634,.F.); +#188615 = FACE_BOUND('',#188616,.T.); +#188616 = EDGE_LOOP('',(#188617,#188618,#188619,#188620,#188621,#188622, + #188623,#188624,#188625,#188626,#188627)); +#188617 = ORIENTED_EDGE('',*,*,#188233,.T.); +#188618 = ORIENTED_EDGE('',*,*,#188264,.T.); +#188619 = ORIENTED_EDGE('',*,*,#188295,.T.); +#188620 = ORIENTED_EDGE('',*,*,#188326,.T.); +#188621 = ORIENTED_EDGE('',*,*,#188358,.T.); +#188622 = ORIENTED_EDGE('',*,*,#188390,.T.); +#188623 = ORIENTED_EDGE('',*,*,#188421,.T.); +#188624 = ORIENTED_EDGE('',*,*,#188452,.T.); +#188625 = ORIENTED_EDGE('',*,*,#188483,.T.); +#188626 = ORIENTED_EDGE('',*,*,#188515,.T.); +#188627 = ORIENTED_EDGE('',*,*,#188538,.T.); +#188628 = FACE_BOUND('',#188629,.T.); +#188629 = EDGE_LOOP('',(#188630)); +#188630 = ORIENTED_EDGE('',*,*,#188570,.T.); +#188631 = FACE_BOUND('',#188632,.T.); +#188632 = EDGE_LOOP('',(#188633)); +#188633 = ORIENTED_EDGE('',*,*,#188603,.T.); +#188634 = PLANE('',#188635); +#188635 = AXIS2_PLACEMENT_3D('',#188636,#188637,#188638); +#188636 = CARTESIAN_POINT('',(0.,0.,1.51)); +#188637 = DIRECTION('',(0.,0.,1.)); +#188638 = DIRECTION('',(1.,0.,-0.)); +#188639 = ADVANCED_FACE('',(#188640,#188653,#188656),#188659,.T.); +#188640 = FACE_BOUND('',#188641,.F.); +#188641 = EDGE_LOOP('',(#188642,#188643,#188644,#188645,#188646,#188647, + #188648,#188649,#188650,#188651,#188652)); +#188642 = ORIENTED_EDGE('',*,*,#188217,.T.); +#188643 = ORIENTED_EDGE('',*,*,#188248,.T.); +#188644 = ORIENTED_EDGE('',*,*,#188279,.T.); +#188645 = ORIENTED_EDGE('',*,*,#188310,.T.); +#188646 = ORIENTED_EDGE('',*,*,#188341,.T.); +#188647 = ORIENTED_EDGE('',*,*,#188374,.T.); +#188648 = ORIENTED_EDGE('',*,*,#188405,.T.); +#188649 = ORIENTED_EDGE('',*,*,#188436,.T.); +#188650 = ORIENTED_EDGE('',*,*,#188467,.T.); +#188651 = ORIENTED_EDGE('',*,*,#188498,.T.); +#188652 = ORIENTED_EDGE('',*,*,#188531,.T.); +#188653 = FACE_BOUND('',#188654,.F.); +#188654 = EDGE_LOOP('',(#188655)); +#188655 = ORIENTED_EDGE('',*,*,#188562,.T.); +#188656 = FACE_BOUND('',#188657,.F.); +#188657 = EDGE_LOOP('',(#188658)); +#188658 = ORIENTED_EDGE('',*,*,#188595,.T.); +#188659 = PLANE('',#188660); +#188660 = AXIS2_PLACEMENT_3D('',#188661,#188662,#188663); +#188661 = CARTESIAN_POINT('',(0.,0.,1.545)); +#188662 = DIRECTION('',(0.,0.,1.)); +#188663 = DIRECTION('',(1.,0.,-0.)); +#188664 = MANIFOLD_SOLID_BREP('',#188665); +#188665 = CLOSED_SHELL('',(#188666,#188708,#188739,#188770,#188801, + #188832,#188865,#188896,#188927,#188958,#188989,#189011,#189044, + #189066)); +#188666 = ADVANCED_FACE('',(#188667),#188703,.T.); +#188667 = FACE_BOUND('',#188668,.T.); +#188668 = EDGE_LOOP('',(#188669,#188679,#188688,#188696)); +#188669 = ORIENTED_EDGE('',*,*,#188670,.T.); +#188670 = EDGE_CURVE('',#188671,#188673,#188675,.T.); +#188671 = VERTEX_POINT('',#188672); +#188672 = CARTESIAN_POINT('',(142.389443,-82.326853,1.51)); +#188673 = VERTEX_POINT('',#188674); +#188674 = CARTESIAN_POINT('',(142.389443,-82.326853,1.545)); +#188675 = LINE('',#188676,#188677); +#188676 = CARTESIAN_POINT('',(142.389443,-82.326853,1.51)); +#188677 = VECTOR('',#188678,1.); +#188678 = DIRECTION('',(0.,0.,1.)); +#188679 = ORIENTED_EDGE('',*,*,#188680,.T.); +#188680 = EDGE_CURVE('',#188673,#188681,#188683,.T.); +#188681 = VERTEX_POINT('',#188682); +#188682 = CARTESIAN_POINT('',(142.543079,-82.390491,1.545)); +#188683 = CIRCLE('',#188684,0.100000590676); +#188684 = AXIS2_PLACEMENT_3D('',#188685,#188686,#188687); +#188685 = CARTESIAN_POINT('',(142.445,-82.41000068719,1.545)); +#188686 = DIRECTION('',(0.,0.,-1.)); +#188687 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#188688 = ORIENTED_EDGE('',*,*,#188689,.F.); +#188689 = EDGE_CURVE('',#188690,#188681,#188692,.T.); +#188690 = VERTEX_POINT('',#188691); +#188691 = CARTESIAN_POINT('',(142.543079,-82.390491,1.51)); +#188692 = LINE('',#188693,#188694); +#188693 = CARTESIAN_POINT('',(142.543079,-82.390491,1.51)); +#188694 = VECTOR('',#188695,1.); +#188695 = DIRECTION('',(0.,0.,1.)); +#188696 = ORIENTED_EDGE('',*,*,#188697,.F.); +#188697 = EDGE_CURVE('',#188671,#188690,#188698,.T.); +#188698 = CIRCLE('',#188699,0.100000590676); +#188699 = AXIS2_PLACEMENT_3D('',#188700,#188701,#188702); +#188700 = CARTESIAN_POINT('',(142.445,-82.41000068719,1.51)); +#188701 = DIRECTION('',(0.,0.,-1.)); +#188702 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#188703 = CYLINDRICAL_SURFACE('',#188704,0.100000590676); +#188704 = AXIS2_PLACEMENT_3D('',#188705,#188706,#188707); +#188705 = CARTESIAN_POINT('',(142.445,-82.41000068719,1.51)); +#188706 = DIRECTION('',(0.,0.,-1.)); +#188707 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#188708 = ADVANCED_FACE('',(#188709),#188734,.T.); +#188709 = FACE_BOUND('',#188710,.T.); +#188710 = EDGE_LOOP('',(#188711,#188712,#188720,#188728)); +#188711 = ORIENTED_EDGE('',*,*,#188689,.T.); +#188712 = ORIENTED_EDGE('',*,*,#188713,.T.); +#188713 = EDGE_CURVE('',#188681,#188714,#188716,.T.); +#188714 = VERTEX_POINT('',#188715); +#188715 = CARTESIAN_POINT('',(142.543079,-84.074509,1.545)); +#188716 = LINE('',#188717,#188718); +#188717 = CARTESIAN_POINT('',(142.543079,-82.390491,1.545)); +#188718 = VECTOR('',#188719,1.); +#188719 = DIRECTION('',(0.,-1.,0.)); +#188720 = ORIENTED_EDGE('',*,*,#188721,.F.); +#188721 = EDGE_CURVE('',#188722,#188714,#188724,.T.); +#188722 = VERTEX_POINT('',#188723); +#188723 = CARTESIAN_POINT('',(142.543079,-84.074509,1.51)); +#188724 = LINE('',#188725,#188726); +#188725 = CARTESIAN_POINT('',(142.543079,-84.074509,1.51)); +#188726 = VECTOR('',#188727,1.); +#188727 = DIRECTION('',(0.,0.,1.)); +#188728 = ORIENTED_EDGE('',*,*,#188729,.F.); +#188729 = EDGE_CURVE('',#188690,#188722,#188730,.T.); +#188730 = LINE('',#188731,#188732); +#188731 = CARTESIAN_POINT('',(142.543079,-82.390491,1.51)); +#188732 = VECTOR('',#188733,1.); +#188733 = DIRECTION('',(0.,-1.,0.)); +#188734 = PLANE('',#188735); +#188735 = AXIS2_PLACEMENT_3D('',#188736,#188737,#188738); +#188736 = CARTESIAN_POINT('',(142.543079,-82.390491,1.51)); +#188737 = DIRECTION('',(1.,0.,-0.)); +#188738 = DIRECTION('',(0.,-1.,0.)); +#188739 = ADVANCED_FACE('',(#188740),#188765,.T.); +#188740 = FACE_BOUND('',#188741,.T.); +#188741 = EDGE_LOOP('',(#188742,#188743,#188751,#188759)); +#188742 = ORIENTED_EDGE('',*,*,#188721,.T.); +#188743 = ORIENTED_EDGE('',*,*,#188744,.T.); +#188744 = EDGE_CURVE('',#188714,#188745,#188747,.T.); +#188745 = VERTEX_POINT('',#188746); +#188746 = CARTESIAN_POINT('',(142.528147,-84.110557,1.545)); +#188747 = LINE('',#188748,#188749); +#188748 = CARTESIAN_POINT('',(142.543079,-84.074509,1.545)); +#188749 = VECTOR('',#188750,1.); +#188750 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#188751 = ORIENTED_EDGE('',*,*,#188752,.F.); +#188752 = EDGE_CURVE('',#188753,#188745,#188755,.T.); +#188753 = VERTEX_POINT('',#188754); +#188754 = CARTESIAN_POINT('',(142.528147,-84.110557,1.51)); +#188755 = LINE('',#188756,#188757); +#188756 = CARTESIAN_POINT('',(142.528147,-84.110557,1.51)); +#188757 = VECTOR('',#188758,1.); +#188758 = DIRECTION('',(0.,0.,1.)); +#188759 = ORIENTED_EDGE('',*,*,#188760,.F.); +#188760 = EDGE_CURVE('',#188722,#188753,#188761,.T.); +#188761 = LINE('',#188762,#188763); +#188762 = CARTESIAN_POINT('',(142.543079,-84.074509,1.51)); +#188763 = VECTOR('',#188764,1.); +#188764 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#188765 = PLANE('',#188766); +#188766 = AXIS2_PLACEMENT_3D('',#188767,#188768,#188769); +#188767 = CARTESIAN_POINT('',(142.543079,-84.074509,1.51)); +#188768 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#188769 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#188770 = ADVANCED_FACE('',(#188771),#188796,.T.); +#188771 = FACE_BOUND('',#188772,.T.); +#188772 = EDGE_LOOP('',(#188773,#188774,#188782,#188790)); +#188773 = ORIENTED_EDGE('',*,*,#188752,.T.); +#188774 = ORIENTED_EDGE('',*,*,#188775,.T.); +#188775 = EDGE_CURVE('',#188745,#188776,#188778,.T.); +#188776 = VERTEX_POINT('',#188777); +#188777 = CARTESIAN_POINT('',(142.2695,-84.371921,1.545)); +#188778 = LINE('',#188779,#188780); +#188779 = CARTESIAN_POINT('',(142.528147,-84.110557,1.545)); +#188780 = VECTOR('',#188781,1.); +#188781 = DIRECTION('',(-0.703402625215,-0.710791633913,0.)); +#188782 = ORIENTED_EDGE('',*,*,#188783,.F.); +#188783 = EDGE_CURVE('',#188784,#188776,#188786,.T.); +#188784 = VERTEX_POINT('',#188785); +#188785 = CARTESIAN_POINT('',(142.2695,-84.371921,1.51)); +#188786 = LINE('',#188787,#188788); +#188787 = CARTESIAN_POINT('',(142.2695,-84.371921,1.51)); +#188788 = VECTOR('',#188789,1.); +#188789 = DIRECTION('',(0.,0.,1.)); +#188790 = ORIENTED_EDGE('',*,*,#188791,.F.); +#188791 = EDGE_CURVE('',#188753,#188784,#188792,.T.); +#188792 = LINE('',#188793,#188794); +#188793 = CARTESIAN_POINT('',(142.528147,-84.110557,1.51)); +#188794 = VECTOR('',#188795,1.); +#188795 = DIRECTION('',(-0.703402625215,-0.710791633913,0.)); +#188796 = PLANE('',#188797); +#188797 = AXIS2_PLACEMENT_3D('',#188798,#188799,#188800); +#188798 = CARTESIAN_POINT('',(142.528147,-84.110557,1.51)); +#188799 = DIRECTION('',(0.710791633913,-0.703402625215,0.)); +#188800 = DIRECTION('',(-0.703402625215,-0.710791633913,0.)); +#188801 = ADVANCED_FACE('',(#188802),#188827,.T.); +#188802 = FACE_BOUND('',#188803,.T.); +#188803 = EDGE_LOOP('',(#188804,#188805,#188813,#188821)); +#188804 = ORIENTED_EDGE('',*,*,#188783,.T.); +#188805 = ORIENTED_EDGE('',*,*,#188806,.T.); +#188806 = EDGE_CURVE('',#188776,#188807,#188809,.T.); +#188807 = VERTEX_POINT('',#188808); +#188808 = CARTESIAN_POINT('',(142.277164,-84.385195,1.545)); +#188809 = LINE('',#188810,#188811); +#188810 = CARTESIAN_POINT('',(142.2695,-84.371921,1.545)); +#188811 = VECTOR('',#188812,1.); +#188812 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#188813 = ORIENTED_EDGE('',*,*,#188814,.F.); +#188814 = EDGE_CURVE('',#188815,#188807,#188817,.T.); +#188815 = VERTEX_POINT('',#188816); +#188816 = CARTESIAN_POINT('',(142.277164,-84.385195,1.51)); +#188817 = LINE('',#188818,#188819); +#188818 = CARTESIAN_POINT('',(142.277164,-84.385195,1.51)); +#188819 = VECTOR('',#188820,1.); +#188820 = DIRECTION('',(0.,0.,1.)); +#188821 = ORIENTED_EDGE('',*,*,#188822,.F.); +#188822 = EDGE_CURVE('',#188784,#188815,#188823,.T.); +#188823 = LINE('',#188824,#188825); +#188824 = CARTESIAN_POINT('',(142.2695,-84.371921,1.51)); +#188825 = VECTOR('',#188826,1.); +#188826 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#188827 = PLANE('',#188828); +#188828 = AXIS2_PLACEMENT_3D('',#188829,#188830,#188831); +#188829 = CARTESIAN_POINT('',(142.2695,-84.371921,1.51)); +#188830 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#188831 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#188832 = ADVANCED_FACE('',(#188833),#188860,.T.); +#188833 = FACE_BOUND('',#188834,.T.); +#188834 = EDGE_LOOP('',(#188835,#188836,#188845,#188853)); +#188835 = ORIENTED_EDGE('',*,*,#188814,.T.); +#188836 = ORIENTED_EDGE('',*,*,#188837,.T.); +#188837 = EDGE_CURVE('',#188807,#188838,#188840,.T.); +#188838 = VERTEX_POINT('',#188839); +#188839 = CARTESIAN_POINT('',(142.114805,-84.222836,1.545)); +#188840 = CIRCLE('',#188841,0.299999934501); +#188841 = AXIS2_PLACEMENT_3D('',#188842,#188843,#188844); +#188842 = CARTESIAN_POINT('',(142.00000014059,-84.4999998594,1.545)); +#188843 = DIRECTION('',(0.,0.,-1.)); +#188844 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#188845 = ORIENTED_EDGE('',*,*,#188846,.F.); +#188846 = EDGE_CURVE('',#188847,#188838,#188849,.T.); +#188847 = VERTEX_POINT('',#188848); +#188848 = CARTESIAN_POINT('',(142.114805,-84.222836,1.51)); +#188849 = LINE('',#188850,#188851); +#188850 = CARTESIAN_POINT('',(142.114805,-84.222836,1.51)); +#188851 = VECTOR('',#188852,1.); +#188852 = DIRECTION('',(0.,0.,1.)); +#188853 = ORIENTED_EDGE('',*,*,#188854,.F.); +#188854 = EDGE_CURVE('',#188815,#188847,#188855,.T.); +#188855 = CIRCLE('',#188856,0.299999934501); +#188856 = AXIS2_PLACEMENT_3D('',#188857,#188858,#188859); +#188857 = CARTESIAN_POINT('',(142.00000014059,-84.4999998594,1.51)); +#188858 = DIRECTION('',(0.,0.,-1.)); +#188859 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#188860 = CYLINDRICAL_SURFACE('',#188861,0.299999934501); +#188861 = AXIS2_PLACEMENT_3D('',#188862,#188863,#188864); +#188862 = CARTESIAN_POINT('',(142.00000014059,-84.4999998594,1.51)); +#188863 = DIRECTION('',(0.,0.,-1.)); +#188864 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#188865 = ADVANCED_FACE('',(#188866),#188891,.T.); +#188866 = FACE_BOUND('',#188867,.T.); +#188867 = EDGE_LOOP('',(#188868,#188869,#188877,#188885)); +#188868 = ORIENTED_EDGE('',*,*,#188846,.T.); +#188869 = ORIENTED_EDGE('',*,*,#188870,.T.); +#188870 = EDGE_CURVE('',#188838,#188871,#188873,.T.); +#188871 = VERTEX_POINT('',#188872); +#188872 = CARTESIAN_POINT('',(142.128078,-84.230499,1.545)); +#188873 = LINE('',#188874,#188875); +#188874 = CARTESIAN_POINT('',(142.114805,-84.222836,1.545)); +#188875 = VECTOR('',#188876,1.); +#188876 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#188877 = ORIENTED_EDGE('',*,*,#188878,.F.); +#188878 = EDGE_CURVE('',#188879,#188871,#188881,.T.); +#188879 = VERTEX_POINT('',#188880); +#188880 = CARTESIAN_POINT('',(142.128078,-84.230499,1.51)); +#188881 = LINE('',#188882,#188883); +#188882 = CARTESIAN_POINT('',(142.128078,-84.230499,1.51)); +#188883 = VECTOR('',#188884,1.); +#188884 = DIRECTION('',(0.,0.,1.)); +#188885 = ORIENTED_EDGE('',*,*,#188886,.F.); +#188886 = EDGE_CURVE('',#188847,#188879,#188887,.T.); +#188887 = LINE('',#188888,#188889); +#188888 = CARTESIAN_POINT('',(142.114805,-84.222836,1.51)); +#188889 = VECTOR('',#188890,1.); +#188890 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#188891 = PLANE('',#188892); +#188892 = AXIS2_PLACEMENT_3D('',#188893,#188894,#188895); +#188893 = CARTESIAN_POINT('',(142.114805,-84.222836,1.51)); +#188894 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#188895 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#188896 = ADVANCED_FACE('',(#188897),#188922,.T.); +#188897 = FACE_BOUND('',#188898,.T.); +#188898 = EDGE_LOOP('',(#188899,#188900,#188908,#188916)); +#188899 = ORIENTED_EDGE('',*,*,#188878,.T.); +#188900 = ORIENTED_EDGE('',*,*,#188901,.T.); +#188901 = EDGE_CURVE('',#188871,#188902,#188904,.T.); +#188902 = VERTEX_POINT('',#188903); +#188903 = CARTESIAN_POINT('',(142.345,-84.013578,1.545)); +#188904 = LINE('',#188905,#188906); +#188905 = CARTESIAN_POINT('',(142.128078,-84.230499,1.545)); +#188906 = VECTOR('',#188907,1.); +#188907 = DIRECTION('',(0.707108411053,0.707105151317,0.)); +#188908 = ORIENTED_EDGE('',*,*,#188909,.F.); +#188909 = EDGE_CURVE('',#188910,#188902,#188912,.T.); +#188910 = VERTEX_POINT('',#188911); +#188911 = CARTESIAN_POINT('',(142.345,-84.013578,1.51)); +#188912 = LINE('',#188913,#188914); +#188913 = CARTESIAN_POINT('',(142.345,-84.013578,1.51)); +#188914 = VECTOR('',#188915,1.); +#188915 = DIRECTION('',(0.,0.,1.)); +#188916 = ORIENTED_EDGE('',*,*,#188917,.F.); +#188917 = EDGE_CURVE('',#188879,#188910,#188918,.T.); +#188918 = LINE('',#188919,#188920); +#188919 = CARTESIAN_POINT('',(142.128078,-84.230499,1.51)); +#188920 = VECTOR('',#188921,1.); +#188921 = DIRECTION('',(0.707108411053,0.707105151317,0.)); +#188922 = PLANE('',#188923); +#188923 = AXIS2_PLACEMENT_3D('',#188924,#188925,#188926); +#188924 = CARTESIAN_POINT('',(142.128078,-84.230499,1.51)); +#188925 = DIRECTION('',(-0.707105151317,0.707108411053,0.)); +#188926 = DIRECTION('',(0.707108411053,0.707105151317,0.)); +#188927 = ADVANCED_FACE('',(#188928),#188953,.T.); +#188928 = FACE_BOUND('',#188929,.T.); +#188929 = EDGE_LOOP('',(#188930,#188931,#188939,#188947)); +#188930 = ORIENTED_EDGE('',*,*,#188909,.T.); +#188931 = ORIENTED_EDGE('',*,*,#188932,.T.); +#188932 = EDGE_CURVE('',#188902,#188933,#188935,.T.); +#188933 = VERTEX_POINT('',#188934); +#188934 = CARTESIAN_POINT('',(142.346921,-82.390491,1.545)); +#188935 = LINE('',#188936,#188937); +#188936 = CARTESIAN_POINT('',(142.345,-84.013578,1.545)); +#188937 = VECTOR('',#188938,1.); +#188938 = DIRECTION('',(1.183546325341E-03,0.999999299609,0.)); +#188939 = ORIENTED_EDGE('',*,*,#188940,.F.); +#188940 = EDGE_CURVE('',#188941,#188933,#188943,.T.); +#188941 = VERTEX_POINT('',#188942); +#188942 = CARTESIAN_POINT('',(142.346921,-82.390491,1.51)); +#188943 = LINE('',#188944,#188945); +#188944 = CARTESIAN_POINT('',(142.346921,-82.390491,1.51)); +#188945 = VECTOR('',#188946,1.); +#188946 = DIRECTION('',(0.,0.,1.)); +#188947 = ORIENTED_EDGE('',*,*,#188948,.F.); +#188948 = EDGE_CURVE('',#188910,#188941,#188949,.T.); +#188949 = LINE('',#188950,#188951); +#188950 = CARTESIAN_POINT('',(142.345,-84.013578,1.51)); +#188951 = VECTOR('',#188952,1.); +#188952 = DIRECTION('',(1.183546325341E-03,0.999999299609,0.)); +#188953 = PLANE('',#188954); +#188954 = AXIS2_PLACEMENT_3D('',#188955,#188956,#188957); +#188955 = CARTESIAN_POINT('',(142.345,-84.013578,1.51)); +#188956 = DIRECTION('',(-0.999999299609,1.183546325341E-03,0.)); +#188957 = DIRECTION('',(1.183546325341E-03,0.999999299609,0.)); +#188958 = ADVANCED_FACE('',(#188959),#188984,.T.); +#188959 = FACE_BOUND('',#188960,.T.); +#188960 = EDGE_LOOP('',(#188961,#188962,#188970,#188978)); +#188961 = ORIENTED_EDGE('',*,*,#188940,.T.); +#188962 = ORIENTED_EDGE('',*,*,#188963,.T.); +#188963 = EDGE_CURVE('',#188933,#188964,#188966,.T.); +#188964 = VERTEX_POINT('',#188965); +#188965 = CARTESIAN_POINT('',(142.361853,-82.354443,1.545)); +#188966 = LINE('',#188967,#188968); +#188967 = CARTESIAN_POINT('',(142.346921,-82.390491,1.545)); +#188968 = VECTOR('',#188969,1.); +#188969 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#188970 = ORIENTED_EDGE('',*,*,#188971,.F.); +#188971 = EDGE_CURVE('',#188972,#188964,#188974,.T.); +#188972 = VERTEX_POINT('',#188973); +#188973 = CARTESIAN_POINT('',(142.361853,-82.354443,1.51)); +#188974 = LINE('',#188975,#188976); +#188975 = CARTESIAN_POINT('',(142.361853,-82.354443,1.51)); +#188976 = VECTOR('',#188977,1.); +#188977 = DIRECTION('',(0.,0.,1.)); +#188978 = ORIENTED_EDGE('',*,*,#188979,.F.); +#188979 = EDGE_CURVE('',#188941,#188972,#188980,.T.); +#188980 = LINE('',#188981,#188982); +#188981 = CARTESIAN_POINT('',(142.346921,-82.390491,1.51)); +#188982 = VECTOR('',#188983,1.); +#188983 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#188984 = PLANE('',#188985); +#188985 = AXIS2_PLACEMENT_3D('',#188986,#188987,#188988); +#188986 = CARTESIAN_POINT('',(142.346921,-82.390491,1.51)); +#188987 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#188988 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#188989 = ADVANCED_FACE('',(#188990),#189006,.T.); +#188990 = FACE_BOUND('',#188991,.T.); +#188991 = EDGE_LOOP('',(#188992,#188993,#188999,#189000)); +#188992 = ORIENTED_EDGE('',*,*,#188971,.T.); +#188993 = ORIENTED_EDGE('',*,*,#188994,.T.); +#188994 = EDGE_CURVE('',#188964,#188673,#188995,.T.); +#188995 = LINE('',#188996,#188997); +#188996 = CARTESIAN_POINT('',(142.361853,-82.354443,1.545)); +#188997 = VECTOR('',#188998,1.); +#188998 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#188999 = ORIENTED_EDGE('',*,*,#188670,.F.); +#189000 = ORIENTED_EDGE('',*,*,#189001,.F.); +#189001 = EDGE_CURVE('',#188972,#188671,#189002,.T.); +#189002 = LINE('',#189003,#189004); +#189003 = CARTESIAN_POINT('',(142.361853,-82.354443,1.51)); +#189004 = VECTOR('',#189005,1.); +#189005 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#189006 = PLANE('',#189007); +#189007 = AXIS2_PLACEMENT_3D('',#189008,#189009,#189010); +#189008 = CARTESIAN_POINT('',(142.361853,-82.354443,1.51)); +#189009 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#189010 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#189011 = ADVANCED_FACE('',(#189012),#189039,.F.); +#189012 = FACE_BOUND('',#189013,.T.); +#189013 = EDGE_LOOP('',(#189014,#189024,#189031,#189032)); +#189014 = ORIENTED_EDGE('',*,*,#189015,.T.); +#189015 = EDGE_CURVE('',#189016,#189018,#189020,.T.); +#189016 = VERTEX_POINT('',#189017); +#189017 = CARTESIAN_POINT('',(142.137255,-84.5,1.51)); +#189018 = VERTEX_POINT('',#189019); +#189019 = CARTESIAN_POINT('',(142.137255,-84.5,1.545)); +#189020 = LINE('',#189021,#189022); +#189021 = CARTESIAN_POINT('',(142.137255,-84.5,1.51)); +#189022 = VECTOR('',#189023,1.); +#189023 = DIRECTION('',(0.,0.,1.)); +#189024 = ORIENTED_EDGE('',*,*,#189025,.T.); +#189025 = EDGE_CURVE('',#189018,#189018,#189026,.T.); +#189026 = CIRCLE('',#189027,0.137255); +#189027 = AXIS2_PLACEMENT_3D('',#189028,#189029,#189030); +#189028 = CARTESIAN_POINT('',(142.,-84.5,1.545)); +#189029 = DIRECTION('',(0.,0.,1.)); +#189030 = DIRECTION('',(1.,0.,-0.)); +#189031 = ORIENTED_EDGE('',*,*,#189015,.F.); +#189032 = ORIENTED_EDGE('',*,*,#189033,.F.); +#189033 = EDGE_CURVE('',#189016,#189016,#189034,.T.); +#189034 = CIRCLE('',#189035,0.137255); +#189035 = AXIS2_PLACEMENT_3D('',#189036,#189037,#189038); +#189036 = CARTESIAN_POINT('',(142.,-84.5,1.51)); +#189037 = DIRECTION('',(0.,0.,1.)); +#189038 = DIRECTION('',(1.,0.,-0.)); +#189039 = CYLINDRICAL_SURFACE('',#189040,0.137255); +#189040 = AXIS2_PLACEMENT_3D('',#189041,#189042,#189043); +#189041 = CARTESIAN_POINT('',(142.,-84.5,1.51)); +#189042 = DIRECTION('',(-0.,-0.,-1.)); +#189043 = DIRECTION('',(1.,0.,-0.)); +#189044 = ADVANCED_FACE('',(#189045,#189058),#189061,.F.); +#189045 = FACE_BOUND('',#189046,.T.); +#189046 = EDGE_LOOP('',(#189047,#189048,#189049,#189050,#189051,#189052, + #189053,#189054,#189055,#189056,#189057)); +#189047 = ORIENTED_EDGE('',*,*,#188697,.T.); +#189048 = ORIENTED_EDGE('',*,*,#188729,.T.); +#189049 = ORIENTED_EDGE('',*,*,#188760,.T.); +#189050 = ORIENTED_EDGE('',*,*,#188791,.T.); +#189051 = ORIENTED_EDGE('',*,*,#188822,.T.); +#189052 = ORIENTED_EDGE('',*,*,#188854,.T.); +#189053 = ORIENTED_EDGE('',*,*,#188886,.T.); +#189054 = ORIENTED_EDGE('',*,*,#188917,.T.); +#189055 = ORIENTED_EDGE('',*,*,#188948,.T.); +#189056 = ORIENTED_EDGE('',*,*,#188979,.T.); +#189057 = ORIENTED_EDGE('',*,*,#189001,.T.); +#189058 = FACE_BOUND('',#189059,.T.); +#189059 = EDGE_LOOP('',(#189060)); +#189060 = ORIENTED_EDGE('',*,*,#189033,.T.); +#189061 = PLANE('',#189062); +#189062 = AXIS2_PLACEMENT_3D('',#189063,#189064,#189065); +#189063 = CARTESIAN_POINT('',(0.,0.,1.51)); +#189064 = DIRECTION('',(0.,0.,1.)); +#189065 = DIRECTION('',(1.,0.,-0.)); +#189066 = ADVANCED_FACE('',(#189067,#189080),#189083,.T.); +#189067 = FACE_BOUND('',#189068,.F.); +#189068 = EDGE_LOOP('',(#189069,#189070,#189071,#189072,#189073,#189074, + #189075,#189076,#189077,#189078,#189079)); +#189069 = ORIENTED_EDGE('',*,*,#188680,.T.); +#189070 = ORIENTED_EDGE('',*,*,#188713,.T.); +#189071 = ORIENTED_EDGE('',*,*,#188744,.T.); +#189072 = ORIENTED_EDGE('',*,*,#188775,.T.); +#189073 = ORIENTED_EDGE('',*,*,#188806,.T.); +#189074 = ORIENTED_EDGE('',*,*,#188837,.T.); +#189075 = ORIENTED_EDGE('',*,*,#188870,.T.); +#189076 = ORIENTED_EDGE('',*,*,#188901,.T.); +#189077 = ORIENTED_EDGE('',*,*,#188932,.T.); +#189078 = ORIENTED_EDGE('',*,*,#188963,.T.); +#189079 = ORIENTED_EDGE('',*,*,#188994,.T.); +#189080 = FACE_BOUND('',#189081,.F.); +#189081 = EDGE_LOOP('',(#189082)); +#189082 = ORIENTED_EDGE('',*,*,#189025,.T.); +#189083 = PLANE('',#189084); +#189084 = AXIS2_PLACEMENT_3D('',#189085,#189086,#189087); +#189085 = CARTESIAN_POINT('',(0.,0.,1.545)); +#189086 = DIRECTION('',(0.,0.,1.)); +#189087 = DIRECTION('',(1.,0.,-0.)); +#189088 = MANIFOLD_SOLID_BREP('',#189089); +#189089 = CLOSED_SHELL('',(#189090,#189130,#189161,#189192,#189225, + #189256,#189287,#189318,#189349,#189380,#189413,#189435,#189468, + #189501,#189526)); +#189090 = ADVANCED_FACE('',(#189091),#189125,.F.); +#189091 = FACE_BOUND('',#189092,.F.); +#189092 = EDGE_LOOP('',(#189093,#189103,#189111,#189119)); +#189093 = ORIENTED_EDGE('',*,*,#189094,.T.); +#189094 = EDGE_CURVE('',#189095,#189097,#189099,.T.); +#189095 = VERTEX_POINT('',#189096); +#189096 = CARTESIAN_POINT('',(133.171921,-94.6695,0.)); +#189097 = VERTEX_POINT('',#189098); +#189098 = CARTESIAN_POINT('',(133.171921,-94.6695,-3.5E-02)); +#189099 = LINE('',#189100,#189101); +#189100 = CARTESIAN_POINT('',(133.171921,-94.6695,0.)); +#189101 = VECTOR('',#189102,1.); +#189102 = DIRECTION('',(0.,0.,-1.)); +#189103 = ORIENTED_EDGE('',*,*,#189104,.T.); +#189104 = EDGE_CURVE('',#189097,#189105,#189107,.T.); +#189105 = VERTEX_POINT('',#189106); +#189106 = CARTESIAN_POINT('',(128.55,-99.291422,-3.5E-02)); +#189107 = LINE('',#189108,#189109); +#189108 = CARTESIAN_POINT('',(133.171921,-94.6695,-3.5E-02)); +#189109 = VECTOR('',#189110,1.); +#189110 = DIRECTION('',(-0.707106704692,-0.707106857681,0.)); +#189111 = ORIENTED_EDGE('',*,*,#189112,.F.); +#189112 = EDGE_CURVE('',#189113,#189105,#189115,.T.); +#189113 = VERTEX_POINT('',#189114); +#189114 = CARTESIAN_POINT('',(128.55,-99.291422,0.)); +#189115 = LINE('',#189116,#189117); +#189116 = CARTESIAN_POINT('',(128.55,-99.291422,0.)); +#189117 = VECTOR('',#189118,1.); +#189118 = DIRECTION('',(0.,0.,-1.)); +#189119 = ORIENTED_EDGE('',*,*,#189120,.F.); +#189120 = EDGE_CURVE('',#189095,#189113,#189121,.T.); +#189121 = LINE('',#189122,#189123); +#189122 = CARTESIAN_POINT('',(133.171921,-94.6695,0.)); +#189123 = VECTOR('',#189124,1.); +#189124 = DIRECTION('',(-0.707106704692,-0.707106857681,0.)); +#189125 = PLANE('',#189126); +#189126 = AXIS2_PLACEMENT_3D('',#189127,#189128,#189129); +#189127 = CARTESIAN_POINT('',(133.171921,-94.6695,0.)); +#189128 = DIRECTION('',(-0.707106857681,0.707106704692,0.)); +#189129 = DIRECTION('',(-0.707106704692,-0.707106857681,0.)); +#189130 = ADVANCED_FACE('',(#189131),#189156,.F.); +#189131 = FACE_BOUND('',#189132,.F.); +#189132 = EDGE_LOOP('',(#189133,#189134,#189142,#189150)); +#189133 = ORIENTED_EDGE('',*,*,#189112,.T.); +#189134 = ORIENTED_EDGE('',*,*,#189135,.T.); +#189135 = EDGE_CURVE('',#189105,#189136,#189138,.T.); +#189136 = VERTEX_POINT('',#189137); +#189137 = CARTESIAN_POINT('',(128.55,-99.599166,-3.5E-02)); +#189138 = LINE('',#189139,#189140); +#189139 = CARTESIAN_POINT('',(128.55,-99.291422,-3.5E-02)); +#189140 = VECTOR('',#189141,1.); +#189141 = DIRECTION('',(0.,-1.,0.)); +#189142 = ORIENTED_EDGE('',*,*,#189143,.F.); +#189143 = EDGE_CURVE('',#189144,#189136,#189146,.T.); +#189144 = VERTEX_POINT('',#189145); +#189145 = CARTESIAN_POINT('',(128.55,-99.599166,0.)); +#189146 = LINE('',#189147,#189148); +#189147 = CARTESIAN_POINT('',(128.55,-99.599166,0.)); +#189148 = VECTOR('',#189149,1.); +#189149 = DIRECTION('',(0.,0.,-1.)); +#189150 = ORIENTED_EDGE('',*,*,#189151,.F.); +#189151 = EDGE_CURVE('',#189113,#189144,#189152,.T.); +#189152 = LINE('',#189153,#189154); +#189153 = CARTESIAN_POINT('',(128.55,-99.291422,0.)); +#189154 = VECTOR('',#189155,1.); +#189155 = DIRECTION('',(0.,-1.,0.)); +#189156 = PLANE('',#189157); +#189157 = AXIS2_PLACEMENT_3D('',#189158,#189159,#189160); +#189158 = CARTESIAN_POINT('',(128.55,-99.291422,0.)); +#189159 = DIRECTION('',(-1.,-0.,-0.)); +#189160 = DIRECTION('',(0.,-1.,0.)); +#189161 = ADVANCED_FACE('',(#189162),#189187,.F.); +#189162 = FACE_BOUND('',#189163,.F.); +#189163 = EDGE_LOOP('',(#189164,#189165,#189173,#189181)); +#189164 = ORIENTED_EDGE('',*,*,#189143,.T.); +#189165 = ORIENTED_EDGE('',*,*,#189166,.T.); +#189166 = EDGE_CURVE('',#189136,#189167,#189169,.T.); +#189167 = VERTEX_POINT('',#189168); +#189168 = CARTESIAN_POINT('',(128.564805,-99.603133,-3.5E-02)); +#189169 = LINE('',#189170,#189171); +#189170 = CARTESIAN_POINT('',(128.55,-99.599166,-3.5E-02)); +#189171 = VECTOR('',#189172,1.); +#189172 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#189173 = ORIENTED_EDGE('',*,*,#189174,.F.); +#189174 = EDGE_CURVE('',#189175,#189167,#189177,.T.); +#189175 = VERTEX_POINT('',#189176); +#189176 = CARTESIAN_POINT('',(128.564805,-99.603133,0.)); +#189177 = LINE('',#189178,#189179); +#189178 = CARTESIAN_POINT('',(128.564805,-99.603133,0.)); +#189179 = VECTOR('',#189180,1.); +#189180 = DIRECTION('',(0.,0.,-1.)); +#189181 = ORIENTED_EDGE('',*,*,#189182,.F.); +#189182 = EDGE_CURVE('',#189144,#189175,#189183,.T.); +#189183 = LINE('',#189184,#189185); +#189184 = CARTESIAN_POINT('',(128.55,-99.599166,0.)); +#189185 = VECTOR('',#189186,1.); +#189186 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#189187 = PLANE('',#189188); +#189188 = AXIS2_PLACEMENT_3D('',#189189,#189190,#189191); +#189189 = CARTESIAN_POINT('',(128.55,-99.599166,0.)); +#189190 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#189191 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#189192 = ADVANCED_FACE('',(#189193),#189220,.T.); +#189193 = FACE_BOUND('',#189194,.F.); +#189194 = EDGE_LOOP('',(#189195,#189196,#189205,#189213)); +#189195 = ORIENTED_EDGE('',*,*,#189174,.T.); +#189196 = ORIENTED_EDGE('',*,*,#189197,.T.); +#189197 = EDGE_CURVE('',#189167,#189198,#189200,.T.); +#189198 = VERTEX_POINT('',#189199); +#189199 = CARTESIAN_POINT('',(128.335195,-99.603133,-3.5E-02)); +#189200 = CIRCLE('',#189201,0.299999850918); +#189201 = AXIS2_PLACEMENT_3D('',#189202,#189203,#189204); +#189202 = CARTESIAN_POINT('',(128.45,-99.88029671069,-3.5E-02)); +#189203 = DIRECTION('',(0.,0.,-1.)); +#189204 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#189205 = ORIENTED_EDGE('',*,*,#189206,.F.); +#189206 = EDGE_CURVE('',#189207,#189198,#189209,.T.); +#189207 = VERTEX_POINT('',#189208); +#189208 = CARTESIAN_POINT('',(128.335195,-99.603133,0.)); +#189209 = LINE('',#189210,#189211); +#189210 = CARTESIAN_POINT('',(128.335195,-99.603133,0.)); +#189211 = VECTOR('',#189212,1.); +#189212 = DIRECTION('',(0.,0.,-1.)); +#189213 = ORIENTED_EDGE('',*,*,#189214,.F.); +#189214 = EDGE_CURVE('',#189175,#189207,#189215,.T.); +#189215 = CIRCLE('',#189216,0.299999850918); +#189216 = AXIS2_PLACEMENT_3D('',#189217,#189218,#189219); +#189217 = CARTESIAN_POINT('',(128.45,-99.88029671069,0.)); +#189218 = DIRECTION('',(0.,0.,-1.)); +#189219 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#189220 = CYLINDRICAL_SURFACE('',#189221,0.299999850918); +#189221 = AXIS2_PLACEMENT_3D('',#189222,#189223,#189224); +#189222 = CARTESIAN_POINT('',(128.45,-99.88029671069,0.)); +#189223 = DIRECTION('',(-0.,-0.,1.)); +#189224 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#189225 = ADVANCED_FACE('',(#189226),#189251,.F.); +#189226 = FACE_BOUND('',#189227,.F.); +#189227 = EDGE_LOOP('',(#189228,#189229,#189237,#189245)); +#189228 = ORIENTED_EDGE('',*,*,#189206,.T.); +#189229 = ORIENTED_EDGE('',*,*,#189230,.T.); +#189230 = EDGE_CURVE('',#189198,#189231,#189233,.T.); +#189231 = VERTEX_POINT('',#189232); +#189232 = CARTESIAN_POINT('',(128.35,-99.599166,-3.5E-02)); +#189233 = LINE('',#189234,#189235); +#189234 = CARTESIAN_POINT('',(128.335195,-99.603133,-3.5E-02)); +#189235 = VECTOR('',#189236,1.); +#189236 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#189237 = ORIENTED_EDGE('',*,*,#189238,.F.); +#189238 = EDGE_CURVE('',#189239,#189231,#189241,.T.); +#189239 = VERTEX_POINT('',#189240); +#189240 = CARTESIAN_POINT('',(128.35,-99.599166,0.)); +#189241 = LINE('',#189242,#189243); +#189242 = CARTESIAN_POINT('',(128.35,-99.599166,0.)); +#189243 = VECTOR('',#189244,1.); +#189244 = DIRECTION('',(0.,0.,-1.)); +#189245 = ORIENTED_EDGE('',*,*,#189246,.F.); +#189246 = EDGE_CURVE('',#189207,#189239,#189247,.T.); +#189247 = LINE('',#189248,#189249); +#189248 = CARTESIAN_POINT('',(128.335195,-99.603133,0.)); +#189249 = VECTOR('',#189250,1.); +#189250 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#189251 = PLANE('',#189252); +#189252 = AXIS2_PLACEMENT_3D('',#189253,#189254,#189255); +#189253 = CARTESIAN_POINT('',(128.335195,-99.603133,0.)); +#189254 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#189255 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#189256 = ADVANCED_FACE('',(#189257),#189282,.F.); +#189257 = FACE_BOUND('',#189258,.F.); +#189258 = EDGE_LOOP('',(#189259,#189260,#189268,#189276)); +#189259 = ORIENTED_EDGE('',*,*,#189238,.T.); +#189260 = ORIENTED_EDGE('',*,*,#189261,.T.); +#189261 = EDGE_CURVE('',#189231,#189262,#189264,.T.); +#189262 = VERTEX_POINT('',#189263); +#189263 = CARTESIAN_POINT('',(128.351921,-99.230491,-3.5E-02)); +#189264 = LINE('',#189265,#189266); +#189265 = CARTESIAN_POINT('',(128.35,-99.599166,-3.5E-02)); +#189266 = VECTOR('',#189267,1.); +#189267 = DIRECTION('',(5.210480567207E-03,0.999986425354,0.)); +#189268 = ORIENTED_EDGE('',*,*,#189269,.F.); +#189269 = EDGE_CURVE('',#189270,#189262,#189272,.T.); +#189270 = VERTEX_POINT('',#189271); +#189271 = CARTESIAN_POINT('',(128.351921,-99.230491,0.)); +#189272 = LINE('',#189273,#189274); +#189273 = CARTESIAN_POINT('',(128.351921,-99.230491,0.)); +#189274 = VECTOR('',#189275,1.); +#189275 = DIRECTION('',(0.,0.,-1.)); +#189276 = ORIENTED_EDGE('',*,*,#189277,.F.); +#189277 = EDGE_CURVE('',#189239,#189270,#189278,.T.); +#189278 = LINE('',#189279,#189280); +#189279 = CARTESIAN_POINT('',(128.35,-99.599166,0.)); +#189280 = VECTOR('',#189281,1.); +#189281 = DIRECTION('',(5.210480567207E-03,0.999986425354,0.)); +#189282 = PLANE('',#189283); +#189283 = AXIS2_PLACEMENT_3D('',#189284,#189285,#189286); +#189284 = CARTESIAN_POINT('',(128.35,-99.599166,0.)); +#189285 = DIRECTION('',(0.999986425354,-5.210480567207E-03,0.)); +#189286 = DIRECTION('',(5.210480567207E-03,0.999986425354,0.)); +#189287 = ADVANCED_FACE('',(#189288),#189313,.F.); +#189288 = FACE_BOUND('',#189289,.F.); +#189289 = EDGE_LOOP('',(#189290,#189291,#189299,#189307)); +#189290 = ORIENTED_EDGE('',*,*,#189269,.T.); +#189291 = ORIENTED_EDGE('',*,*,#189292,.T.); +#189292 = EDGE_CURVE('',#189262,#189293,#189295,.T.); +#189293 = VERTEX_POINT('',#189294); +#189294 = CARTESIAN_POINT('',(128.366853,-99.194443,-3.5E-02)); +#189295 = LINE('',#189296,#189297); +#189296 = CARTESIAN_POINT('',(128.351921,-99.230491,-3.5E-02)); +#189297 = VECTOR('',#189298,1.); +#189298 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#189299 = ORIENTED_EDGE('',*,*,#189300,.F.); +#189300 = EDGE_CURVE('',#189301,#189293,#189303,.T.); +#189301 = VERTEX_POINT('',#189302); +#189302 = CARTESIAN_POINT('',(128.366853,-99.194443,0.)); +#189303 = LINE('',#189304,#189305); +#189304 = CARTESIAN_POINT('',(128.366853,-99.194443,0.)); +#189305 = VECTOR('',#189306,1.); +#189306 = DIRECTION('',(0.,0.,-1.)); +#189307 = ORIENTED_EDGE('',*,*,#189308,.F.); +#189308 = EDGE_CURVE('',#189270,#189301,#189309,.T.); +#189309 = LINE('',#189310,#189311); +#189310 = CARTESIAN_POINT('',(128.351921,-99.230491,0.)); +#189311 = VECTOR('',#189312,1.); +#189312 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#189313 = PLANE('',#189314); +#189314 = AXIS2_PLACEMENT_3D('',#189315,#189316,#189317); +#189315 = CARTESIAN_POINT('',(128.351921,-99.230491,0.)); +#189316 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#189317 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#189318 = ADVANCED_FACE('',(#189319),#189344,.F.); +#189319 = FACE_BOUND('',#189320,.F.); +#189320 = EDGE_LOOP('',(#189321,#189322,#189330,#189338)); +#189321 = ORIENTED_EDGE('',*,*,#189300,.T.); +#189322 = ORIENTED_EDGE('',*,*,#189323,.T.); +#189323 = EDGE_CURVE('',#189293,#189324,#189326,.T.); +#189324 = VERTEX_POINT('',#189325); +#189325 = CARTESIAN_POINT('',(133.030499,-94.528078,-3.5E-02)); +#189326 = LINE('',#189327,#189328); +#189327 = CARTESIAN_POINT('',(128.366853,-99.194443,-3.5E-02)); +#189328 = VECTOR('',#189329,1.); +#189329 = DIRECTION('',(0.706900682458,0.707312819862,0.)); +#189330 = ORIENTED_EDGE('',*,*,#189331,.F.); +#189331 = EDGE_CURVE('',#189332,#189324,#189334,.T.); +#189332 = VERTEX_POINT('',#189333); +#189333 = CARTESIAN_POINT('',(133.030499,-94.528078,0.)); +#189334 = LINE('',#189335,#189336); +#189335 = CARTESIAN_POINT('',(133.030499,-94.528078,0.)); +#189336 = VECTOR('',#189337,1.); +#189337 = DIRECTION('',(0.,0.,-1.)); +#189338 = ORIENTED_EDGE('',*,*,#189339,.F.); +#189339 = EDGE_CURVE('',#189301,#189332,#189340,.T.); +#189340 = LINE('',#189341,#189342); +#189341 = CARTESIAN_POINT('',(128.366853,-99.194443,0.)); +#189342 = VECTOR('',#189343,1.); +#189343 = DIRECTION('',(0.706900682458,0.707312819862,0.)); +#189344 = PLANE('',#189345); +#189345 = AXIS2_PLACEMENT_3D('',#189346,#189347,#189348); +#189346 = CARTESIAN_POINT('',(128.366853,-99.194443,0.)); +#189347 = DIRECTION('',(0.707312819862,-0.706900682458,0.)); +#189348 = DIRECTION('',(0.706900682458,0.707312819862,0.)); +#189349 = ADVANCED_FACE('',(#189350),#189375,.F.); +#189350 = FACE_BOUND('',#189351,.F.); +#189351 = EDGE_LOOP('',(#189352,#189353,#189361,#189369)); +#189352 = ORIENTED_EDGE('',*,*,#189331,.T.); +#189353 = ORIENTED_EDGE('',*,*,#189354,.T.); +#189354 = EDGE_CURVE('',#189324,#189355,#189357,.T.); +#189355 = VERTEX_POINT('',#189356); +#189356 = CARTESIAN_POINT('',(133.022836,-94.514805,-3.5E-02)); +#189357 = LINE('',#189358,#189359); +#189358 = CARTESIAN_POINT('',(133.030499,-94.528078,-3.5E-02)); +#189359 = VECTOR('',#189360,1.); +#189360 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#189361 = ORIENTED_EDGE('',*,*,#189362,.F.); +#189362 = EDGE_CURVE('',#189363,#189355,#189365,.T.); +#189363 = VERTEX_POINT('',#189364); +#189364 = CARTESIAN_POINT('',(133.022836,-94.514805,0.)); +#189365 = LINE('',#189366,#189367); +#189366 = CARTESIAN_POINT('',(133.022836,-94.514805,0.)); +#189367 = VECTOR('',#189368,1.); +#189368 = DIRECTION('',(0.,0.,-1.)); +#189369 = ORIENTED_EDGE('',*,*,#189370,.F.); +#189370 = EDGE_CURVE('',#189332,#189363,#189371,.T.); +#189371 = LINE('',#189372,#189373); +#189372 = CARTESIAN_POINT('',(133.030499,-94.528078,0.)); +#189373 = VECTOR('',#189374,1.); +#189374 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#189375 = PLANE('',#189376); +#189376 = AXIS2_PLACEMENT_3D('',#189377,#189378,#189379); +#189377 = CARTESIAN_POINT('',(133.030499,-94.528078,0.)); +#189378 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#189379 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#189380 = ADVANCED_FACE('',(#189381),#189408,.T.); +#189381 = FACE_BOUND('',#189382,.F.); +#189382 = EDGE_LOOP('',(#189383,#189384,#189393,#189401)); +#189383 = ORIENTED_EDGE('',*,*,#189362,.T.); +#189384 = ORIENTED_EDGE('',*,*,#189385,.T.); +#189385 = EDGE_CURVE('',#189355,#189386,#189388,.T.); +#189386 = VERTEX_POINT('',#189387); +#189387 = CARTESIAN_POINT('',(133.185195,-94.677164,-3.5E-02)); +#189388 = CIRCLE('',#189389,0.300000118202); +#189389 = AXIS2_PLACEMENT_3D('',#189390,#189391,#189392); +#189390 = CARTESIAN_POINT('',(133.3,-94.4,-3.5E-02)); +#189391 = DIRECTION('',(0.,0.,-1.)); +#189392 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#189393 = ORIENTED_EDGE('',*,*,#189394,.F.); +#189394 = EDGE_CURVE('',#189395,#189386,#189397,.T.); +#189395 = VERTEX_POINT('',#189396); +#189396 = CARTESIAN_POINT('',(133.185195,-94.677164,0.)); +#189397 = LINE('',#189398,#189399); +#189398 = CARTESIAN_POINT('',(133.185195,-94.677164,0.)); +#189399 = VECTOR('',#189400,1.); +#189400 = DIRECTION('',(0.,0.,-1.)); +#189401 = ORIENTED_EDGE('',*,*,#189402,.F.); +#189402 = EDGE_CURVE('',#189363,#189395,#189403,.T.); +#189403 = CIRCLE('',#189404,0.300000118202); +#189404 = AXIS2_PLACEMENT_3D('',#189405,#189406,#189407); +#189405 = CARTESIAN_POINT('',(133.3,-94.4,0.)); +#189406 = DIRECTION('',(0.,0.,-1.)); +#189407 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#189408 = CYLINDRICAL_SURFACE('',#189409,0.300000118202); +#189409 = AXIS2_PLACEMENT_3D('',#189410,#189411,#189412); +#189410 = CARTESIAN_POINT('',(133.3,-94.4,0.)); +#189411 = DIRECTION('',(-0.,-0.,1.)); +#189412 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#189413 = ADVANCED_FACE('',(#189414),#189430,.F.); +#189414 = FACE_BOUND('',#189415,.F.); +#189415 = EDGE_LOOP('',(#189416,#189417,#189423,#189424)); +#189416 = ORIENTED_EDGE('',*,*,#189394,.T.); +#189417 = ORIENTED_EDGE('',*,*,#189418,.T.); +#189418 = EDGE_CURVE('',#189386,#189097,#189419,.T.); +#189419 = LINE('',#189420,#189421); +#189420 = CARTESIAN_POINT('',(133.185195,-94.677164,-3.5E-02)); +#189421 = VECTOR('',#189422,1.); +#189422 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#189423 = ORIENTED_EDGE('',*,*,#189094,.F.); +#189424 = ORIENTED_EDGE('',*,*,#189425,.F.); +#189425 = EDGE_CURVE('',#189395,#189095,#189426,.T.); +#189426 = LINE('',#189427,#189428); +#189427 = CARTESIAN_POINT('',(133.185195,-94.677164,0.)); +#189428 = VECTOR('',#189429,1.); +#189429 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#189430 = PLANE('',#189431); +#189431 = AXIS2_PLACEMENT_3D('',#189432,#189433,#189434); +#189432 = CARTESIAN_POINT('',(133.185195,-94.677164,0.)); +#189433 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#189434 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#189435 = ADVANCED_FACE('',(#189436),#189463,.F.); +#189436 = FACE_BOUND('',#189437,.F.); +#189437 = EDGE_LOOP('',(#189438,#189448,#189455,#189456)); +#189438 = ORIENTED_EDGE('',*,*,#189439,.T.); +#189439 = EDGE_CURVE('',#189440,#189442,#189444,.T.); +#189440 = VERTEX_POINT('',#189441); +#189441 = CARTESIAN_POINT('',(128.587255,-99.880297,0.)); +#189442 = VERTEX_POINT('',#189443); +#189443 = CARTESIAN_POINT('',(128.587255,-99.880297,-3.5E-02)); +#189444 = LINE('',#189445,#189446); +#189445 = CARTESIAN_POINT('',(128.587255,-99.880297,0.)); +#189446 = VECTOR('',#189447,1.); +#189447 = DIRECTION('',(0.,0.,-1.)); +#189448 = ORIENTED_EDGE('',*,*,#189449,.T.); +#189449 = EDGE_CURVE('',#189442,#189442,#189450,.T.); +#189450 = CIRCLE('',#189451,0.137255); +#189451 = AXIS2_PLACEMENT_3D('',#189452,#189453,#189454); +#189452 = CARTESIAN_POINT('',(128.45,-99.880297,-3.5E-02)); +#189453 = DIRECTION('',(0.,0.,1.)); +#189454 = DIRECTION('',(1.,0.,-0.)); +#189455 = ORIENTED_EDGE('',*,*,#189439,.F.); +#189456 = ORIENTED_EDGE('',*,*,#189457,.F.); +#189457 = EDGE_CURVE('',#189440,#189440,#189458,.T.); +#189458 = CIRCLE('',#189459,0.137255); +#189459 = AXIS2_PLACEMENT_3D('',#189460,#189461,#189462); +#189460 = CARTESIAN_POINT('',(128.45,-99.880297,0.)); +#189461 = DIRECTION('',(0.,0.,1.)); +#189462 = DIRECTION('',(1.,0.,-0.)); +#189463 = CYLINDRICAL_SURFACE('',#189464,0.137255); +#189464 = AXIS2_PLACEMENT_3D('',#189465,#189466,#189467); +#189465 = CARTESIAN_POINT('',(128.45,-99.880297,0.)); +#189466 = DIRECTION('',(0.,0.,1.)); +#189467 = DIRECTION('',(1.,0.,-0.)); +#189468 = ADVANCED_FACE('',(#189469),#189496,.F.); +#189469 = FACE_BOUND('',#189470,.F.); +#189470 = EDGE_LOOP('',(#189471,#189481,#189488,#189489)); +#189471 = ORIENTED_EDGE('',*,*,#189472,.T.); +#189472 = EDGE_CURVE('',#189473,#189475,#189477,.T.); +#189473 = VERTEX_POINT('',#189474); +#189474 = CARTESIAN_POINT('',(133.437255,-94.4,0.)); +#189475 = VERTEX_POINT('',#189476); +#189476 = CARTESIAN_POINT('',(133.437255,-94.4,-3.5E-02)); +#189477 = LINE('',#189478,#189479); +#189478 = CARTESIAN_POINT('',(133.437255,-94.4,0.)); +#189479 = VECTOR('',#189480,1.); +#189480 = DIRECTION('',(0.,0.,-1.)); +#189481 = ORIENTED_EDGE('',*,*,#189482,.T.); +#189482 = EDGE_CURVE('',#189475,#189475,#189483,.T.); +#189483 = CIRCLE('',#189484,0.137255); +#189484 = AXIS2_PLACEMENT_3D('',#189485,#189486,#189487); +#189485 = CARTESIAN_POINT('',(133.3,-94.4,-3.5E-02)); +#189486 = DIRECTION('',(0.,0.,1.)); +#189487 = DIRECTION('',(1.,0.,-0.)); +#189488 = ORIENTED_EDGE('',*,*,#189472,.F.); +#189489 = ORIENTED_EDGE('',*,*,#189490,.F.); +#189490 = EDGE_CURVE('',#189473,#189473,#189491,.T.); +#189491 = CIRCLE('',#189492,0.137255); +#189492 = AXIS2_PLACEMENT_3D('',#189493,#189494,#189495); +#189493 = CARTESIAN_POINT('',(133.3,-94.4,0.)); +#189494 = DIRECTION('',(0.,0.,1.)); +#189495 = DIRECTION('',(1.,0.,-0.)); +#189496 = CYLINDRICAL_SURFACE('',#189497,0.137255); +#189497 = AXIS2_PLACEMENT_3D('',#189498,#189499,#189500); +#189498 = CARTESIAN_POINT('',(133.3,-94.4,0.)); +#189499 = DIRECTION('',(0.,0.,1.)); +#189500 = DIRECTION('',(1.,0.,-0.)); +#189501 = ADVANCED_FACE('',(#189502,#189515,#189518),#189521,.F.); +#189502 = FACE_BOUND('',#189503,.F.); +#189503 = EDGE_LOOP('',(#189504,#189505,#189506,#189507,#189508,#189509, + #189510,#189511,#189512,#189513,#189514)); +#189504 = ORIENTED_EDGE('',*,*,#189120,.T.); +#189505 = ORIENTED_EDGE('',*,*,#189151,.T.); +#189506 = ORIENTED_EDGE('',*,*,#189182,.T.); +#189507 = ORIENTED_EDGE('',*,*,#189214,.T.); +#189508 = ORIENTED_EDGE('',*,*,#189246,.T.); +#189509 = ORIENTED_EDGE('',*,*,#189277,.T.); +#189510 = ORIENTED_EDGE('',*,*,#189308,.T.); +#189511 = ORIENTED_EDGE('',*,*,#189339,.T.); +#189512 = ORIENTED_EDGE('',*,*,#189370,.T.); +#189513 = ORIENTED_EDGE('',*,*,#189402,.T.); +#189514 = ORIENTED_EDGE('',*,*,#189425,.T.); +#189515 = FACE_BOUND('',#189516,.F.); +#189516 = EDGE_LOOP('',(#189517)); +#189517 = ORIENTED_EDGE('',*,*,#189457,.T.); +#189518 = FACE_BOUND('',#189519,.F.); +#189519 = EDGE_LOOP('',(#189520)); +#189520 = ORIENTED_EDGE('',*,*,#189490,.T.); +#189521 = PLANE('',#189522); +#189522 = AXIS2_PLACEMENT_3D('',#189523,#189524,#189525); +#189523 = CARTESIAN_POINT('',(0.,0.,0.)); +#189524 = DIRECTION('',(-0.,-0.,-1.)); +#189525 = DIRECTION('',(-1.,0.,0.)); +#189526 = ADVANCED_FACE('',(#189527,#189540,#189543),#189546,.T.); +#189527 = FACE_BOUND('',#189528,.T.); +#189528 = EDGE_LOOP('',(#189529,#189530,#189531,#189532,#189533,#189534, + #189535,#189536,#189537,#189538,#189539)); +#189529 = ORIENTED_EDGE('',*,*,#189104,.T.); +#189530 = ORIENTED_EDGE('',*,*,#189135,.T.); +#189531 = ORIENTED_EDGE('',*,*,#189166,.T.); +#189532 = ORIENTED_EDGE('',*,*,#189197,.T.); +#189533 = ORIENTED_EDGE('',*,*,#189230,.T.); +#189534 = ORIENTED_EDGE('',*,*,#189261,.T.); +#189535 = ORIENTED_EDGE('',*,*,#189292,.T.); +#189536 = ORIENTED_EDGE('',*,*,#189323,.T.); +#189537 = ORIENTED_EDGE('',*,*,#189354,.T.); +#189538 = ORIENTED_EDGE('',*,*,#189385,.T.); +#189539 = ORIENTED_EDGE('',*,*,#189418,.T.); +#189540 = FACE_BOUND('',#189541,.T.); +#189541 = EDGE_LOOP('',(#189542)); +#189542 = ORIENTED_EDGE('',*,*,#189449,.T.); +#189543 = FACE_BOUND('',#189544,.T.); +#189544 = EDGE_LOOP('',(#189545)); +#189545 = ORIENTED_EDGE('',*,*,#189482,.T.); +#189546 = PLANE('',#189547); +#189547 = AXIS2_PLACEMENT_3D('',#189548,#189549,#189550); +#189548 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#189549 = DIRECTION('',(-0.,-0.,-1.)); +#189550 = DIRECTION('',(-1.,0.,0.)); +#189551 = MANIFOLD_SOLID_BREP('',#189552); +#189552 = CLOSED_SHELL('',(#189553,#189593,#189624,#189655,#189686, + #189719,#189750,#189781,#189812,#189843,#189876,#189898,#189931, + #189964,#189989)); +#189553 = ADVANCED_FACE('',(#189554),#189588,.F.); +#189554 = FACE_BOUND('',#189555,.F.); +#189555 = EDGE_LOOP('',(#189556,#189566,#189574,#189582)); +#189556 = ORIENTED_EDGE('',*,*,#189557,.T.); +#189557 = EDGE_CURVE('',#189558,#189560,#189562,.T.); +#189558 = VERTEX_POINT('',#189559); +#189559 = CARTESIAN_POINT('',(142.1,-84.78113,0.)); +#189560 = VERTEX_POINT('',#189561); +#189561 = CARTESIAN_POINT('',(142.1,-84.78113,-3.5E-02)); +#189562 = LINE('',#189563,#189564); +#189563 = CARTESIAN_POINT('',(142.1,-84.78113,0.)); +#189564 = VECTOR('',#189565,1.); +#189565 = DIRECTION('',(0.,0.,-1.)); +#189566 = ORIENTED_EDGE('',*,*,#189567,.T.); +#189567 = EDGE_CURVE('',#189560,#189568,#189570,.T.); +#189568 = VERTEX_POINT('',#189569); +#189569 = CARTESIAN_POINT('',(142.098079,-86.413343,-3.5E-02)); +#189570 = LINE('',#189571,#189572); +#189571 = CARTESIAN_POINT('',(142.1,-84.78113,-3.5E-02)); +#189572 = VECTOR('',#189573,1.); +#189573 = DIRECTION('',(-1.176928911566E-03,-0.999999307419,0.)); +#189574 = ORIENTED_EDGE('',*,*,#189575,.F.); +#189575 = EDGE_CURVE('',#189576,#189568,#189578,.T.); +#189576 = VERTEX_POINT('',#189577); +#189577 = CARTESIAN_POINT('',(142.098079,-86.413343,0.)); +#189578 = LINE('',#189579,#189580); +#189579 = CARTESIAN_POINT('',(142.098079,-86.413343,0.)); +#189580 = VECTOR('',#189581,1.); +#189581 = DIRECTION('',(0.,0.,-1.)); +#189582 = ORIENTED_EDGE('',*,*,#189583,.F.); +#189583 = EDGE_CURVE('',#189558,#189576,#189584,.T.); +#189584 = LINE('',#189585,#189586); +#189585 = CARTESIAN_POINT('',(142.1,-84.78113,0.)); +#189586 = VECTOR('',#189587,1.); +#189587 = DIRECTION('',(-1.176928911566E-03,-0.999999307419,0.)); +#189588 = PLANE('',#189589); +#189589 = AXIS2_PLACEMENT_3D('',#189590,#189591,#189592); +#189590 = CARTESIAN_POINT('',(142.1,-84.78113,0.)); +#189591 = DIRECTION('',(-0.999999307419,1.176928911566E-03,0.)); +#189592 = DIRECTION('',(-1.176928911566E-03,-0.999999307419,0.)); +#189593 = ADVANCED_FACE('',(#189594),#189619,.F.); +#189594 = FACE_BOUND('',#189595,.F.); +#189595 = EDGE_LOOP('',(#189596,#189597,#189605,#189613)); +#189596 = ORIENTED_EDGE('',*,*,#189575,.T.); +#189597 = ORIENTED_EDGE('',*,*,#189598,.T.); +#189598 = EDGE_CURVE('',#189568,#189599,#189601,.T.); +#189599 = VERTEX_POINT('',#189600); +#189600 = CARTESIAN_POINT('',(142.083147,-86.449392,-3.5E-02)); +#189601 = LINE('',#189602,#189603); +#189602 = CARTESIAN_POINT('',(142.098079,-86.413343,-3.5E-02)); +#189603 = VECTOR('',#189604,1.); +#189604 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#189605 = ORIENTED_EDGE('',*,*,#189606,.F.); +#189606 = EDGE_CURVE('',#189607,#189599,#189609,.T.); +#189607 = VERTEX_POINT('',#189608); +#189608 = CARTESIAN_POINT('',(142.083147,-86.449392,0.)); +#189609 = LINE('',#189610,#189611); +#189610 = CARTESIAN_POINT('',(142.083147,-86.449392,0.)); +#189611 = VECTOR('',#189612,1.); +#189612 = DIRECTION('',(0.,0.,-1.)); +#189613 = ORIENTED_EDGE('',*,*,#189614,.F.); +#189614 = EDGE_CURVE('',#189576,#189607,#189615,.T.); +#189615 = LINE('',#189616,#189617); +#189616 = CARTESIAN_POINT('',(142.098079,-86.413343,0.)); +#189617 = VECTOR('',#189618,1.); +#189618 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#189619 = PLANE('',#189620); +#189620 = AXIS2_PLACEMENT_3D('',#189621,#189622,#189623); +#189621 = CARTESIAN_POINT('',(142.098079,-86.413343,0.)); +#189622 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#189623 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#189624 = ADVANCED_FACE('',(#189625),#189650,.F.); +#189625 = FACE_BOUND('',#189626,.F.); +#189626 = EDGE_LOOP('',(#189627,#189628,#189636,#189644)); +#189627 = ORIENTED_EDGE('',*,*,#189606,.T.); +#189628 = ORIENTED_EDGE('',*,*,#189629,.T.); +#189629 = EDGE_CURVE('',#189599,#189630,#189632,.T.); +#189630 = VERTEX_POINT('',#189631); +#189631 = CARTESIAN_POINT('',(136.716417,-91.818838,-3.5E-02)); +#189632 = LINE('',#189633,#189634); +#189633 = CARTESIAN_POINT('',(142.083147,-86.449392,-3.5E-02)); +#189634 = VECTOR('',#189635,1.); +#189635 = DIRECTION('',(-0.706927877182,-0.707285639938,0.)); +#189636 = ORIENTED_EDGE('',*,*,#189637,.F.); +#189637 = EDGE_CURVE('',#189638,#189630,#189640,.T.); +#189638 = VERTEX_POINT('',#189639); +#189639 = CARTESIAN_POINT('',(136.716417,-91.818838,0.)); +#189640 = LINE('',#189641,#189642); +#189641 = CARTESIAN_POINT('',(136.716417,-91.818838,0.)); +#189642 = VECTOR('',#189643,1.); +#189643 = DIRECTION('',(0.,0.,-1.)); +#189644 = ORIENTED_EDGE('',*,*,#189645,.F.); +#189645 = EDGE_CURVE('',#189607,#189638,#189646,.T.); +#189646 = LINE('',#189647,#189648); +#189647 = CARTESIAN_POINT('',(142.083147,-86.449392,0.)); +#189648 = VECTOR('',#189649,1.); +#189649 = DIRECTION('',(-0.706927877182,-0.707285639938,0.)); +#189650 = PLANE('',#189651); +#189651 = AXIS2_PLACEMENT_3D('',#189652,#189653,#189654); +#189652 = CARTESIAN_POINT('',(142.083147,-86.449392,0.)); +#189653 = DIRECTION('',(-0.707285639938,0.706927877182,0.)); +#189654 = DIRECTION('',(-0.706927877182,-0.707285639938,0.)); +#189655 = ADVANCED_FACE('',(#189656),#189681,.F.); +#189656 = FACE_BOUND('',#189657,.F.); +#189657 = EDGE_LOOP('',(#189658,#189659,#189667,#189675)); +#189658 = ORIENTED_EDGE('',*,*,#189637,.T.); +#189659 = ORIENTED_EDGE('',*,*,#189660,.T.); +#189660 = EDGE_CURVE('',#189630,#189661,#189663,.T.); +#189661 = VERTEX_POINT('',#189662); +#189662 = CARTESIAN_POINT('',(136.724081,-91.832112,-3.5E-02)); +#189663 = LINE('',#189664,#189665); +#189664 = CARTESIAN_POINT('',(136.716417,-91.818838,-3.5E-02)); +#189665 = VECTOR('',#189666,1.); +#189666 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#189667 = ORIENTED_EDGE('',*,*,#189668,.F.); +#189668 = EDGE_CURVE('',#189669,#189661,#189671,.T.); +#189669 = VERTEX_POINT('',#189670); +#189670 = CARTESIAN_POINT('',(136.724081,-91.832112,0.)); +#189671 = LINE('',#189672,#189673); +#189672 = CARTESIAN_POINT('',(136.724081,-91.832112,0.)); +#189673 = VECTOR('',#189674,1.); +#189674 = DIRECTION('',(0.,0.,-1.)); +#189675 = ORIENTED_EDGE('',*,*,#189676,.F.); +#189676 = EDGE_CURVE('',#189638,#189669,#189677,.T.); +#189677 = LINE('',#189678,#189679); +#189678 = CARTESIAN_POINT('',(136.716417,-91.818838,0.)); +#189679 = VECTOR('',#189680,1.); +#189680 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#189681 = PLANE('',#189682); +#189682 = AXIS2_PLACEMENT_3D('',#189683,#189684,#189685); +#189683 = CARTESIAN_POINT('',(136.716417,-91.818838,0.)); +#189684 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#189685 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#189686 = ADVANCED_FACE('',(#189687),#189714,.T.); +#189687 = FACE_BOUND('',#189688,.F.); +#189688 = EDGE_LOOP('',(#189689,#189690,#189699,#189707)); +#189689 = ORIENTED_EDGE('',*,*,#189668,.T.); +#189690 = ORIENTED_EDGE('',*,*,#189691,.T.); +#189691 = EDGE_CURVE('',#189661,#189692,#189694,.T.); +#189692 = VERTEX_POINT('',#189693); +#189693 = CARTESIAN_POINT('',(136.561722,-91.669753,-3.5E-02)); +#189694 = CIRCLE('',#189695,0.299999934501); +#189695 = AXIS2_PLACEMENT_3D('',#189696,#189697,#189698); +#189696 = CARTESIAN_POINT('',(136.44691714059,-91.9469168594,-3.5E-02)); +#189697 = DIRECTION('',(0.,0.,-1.)); +#189698 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#189699 = ORIENTED_EDGE('',*,*,#189700,.F.); +#189700 = EDGE_CURVE('',#189701,#189692,#189703,.T.); +#189701 = VERTEX_POINT('',#189702); +#189702 = CARTESIAN_POINT('',(136.561722,-91.669753,0.)); +#189703 = LINE('',#189704,#189705); +#189704 = CARTESIAN_POINT('',(136.561722,-91.669753,0.)); +#189705 = VECTOR('',#189706,1.); +#189706 = DIRECTION('',(0.,0.,-1.)); +#189707 = ORIENTED_EDGE('',*,*,#189708,.F.); +#189708 = EDGE_CURVE('',#189669,#189701,#189709,.T.); +#189709 = CIRCLE('',#189710,0.299999934501); +#189710 = AXIS2_PLACEMENT_3D('',#189711,#189712,#189713); +#189711 = CARTESIAN_POINT('',(136.44691714059,-91.9469168594,0.)); +#189712 = DIRECTION('',(0.,0.,-1.)); +#189713 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#189714 = CYLINDRICAL_SURFACE('',#189715,0.299999934501); +#189715 = AXIS2_PLACEMENT_3D('',#189716,#189717,#189718); +#189716 = CARTESIAN_POINT('',(136.44691714059,-91.9469168594,0.)); +#189717 = DIRECTION('',(-0.,-0.,1.)); +#189718 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#189719 = ADVANCED_FACE('',(#189720),#189745,.F.); +#189720 = FACE_BOUND('',#189721,.F.); +#189721 = EDGE_LOOP('',(#189722,#189723,#189731,#189739)); +#189722 = ORIENTED_EDGE('',*,*,#189700,.T.); +#189723 = ORIENTED_EDGE('',*,*,#189724,.T.); +#189724 = EDGE_CURVE('',#189692,#189725,#189727,.T.); +#189725 = VERTEX_POINT('',#189726); +#189726 = CARTESIAN_POINT('',(136.574995,-91.677416,-3.5E-02)); +#189727 = LINE('',#189728,#189729); +#189728 = CARTESIAN_POINT('',(136.561722,-91.669753,-3.5E-02)); +#189729 = VECTOR('',#189730,1.); +#189730 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#189731 = ORIENTED_EDGE('',*,*,#189732,.F.); +#189732 = EDGE_CURVE('',#189733,#189725,#189735,.T.); +#189733 = VERTEX_POINT('',#189734); +#189734 = CARTESIAN_POINT('',(136.574995,-91.677416,0.)); +#189735 = LINE('',#189736,#189737); +#189736 = CARTESIAN_POINT('',(136.574995,-91.677416,0.)); +#189737 = VECTOR('',#189738,1.); +#189738 = DIRECTION('',(0.,0.,-1.)); +#189739 = ORIENTED_EDGE('',*,*,#189740,.F.); +#189740 = EDGE_CURVE('',#189701,#189733,#189741,.T.); +#189741 = LINE('',#189742,#189743); +#189742 = CARTESIAN_POINT('',(136.561722,-91.669753,0.)); +#189743 = VECTOR('',#189744,1.); +#189744 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#189745 = PLANE('',#189746); +#189746 = AXIS2_PLACEMENT_3D('',#189747,#189748,#189749); +#189747 = CARTESIAN_POINT('',(136.561722,-91.669753,0.)); +#189748 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#189749 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#189750 = ADVANCED_FACE('',(#189751),#189776,.F.); +#189751 = FACE_BOUND('',#189752,.F.); +#189752 = EDGE_LOOP('',(#189753,#189754,#189762,#189770)); +#189753 = ORIENTED_EDGE('',*,*,#189732,.T.); +#189754 = ORIENTED_EDGE('',*,*,#189755,.T.); +#189755 = EDGE_CURVE('',#189725,#189756,#189758,.T.); +#189756 = VERTEX_POINT('',#189757); +#189757 = CARTESIAN_POINT('',(141.9,-86.352412,-3.5E-02)); +#189758 = LINE('',#189759,#189760); +#189759 = CARTESIAN_POINT('',(136.574995,-91.677416,-3.5E-02)); +#189760 = VECTOR('',#189761,1.); +#189761 = DIRECTION('',(0.707106847581,0.707106714792,0.)); +#189762 = ORIENTED_EDGE('',*,*,#189763,.F.); +#189763 = EDGE_CURVE('',#189764,#189756,#189766,.T.); +#189764 = VERTEX_POINT('',#189765); +#189765 = CARTESIAN_POINT('',(141.9,-86.352412,0.)); +#189766 = LINE('',#189767,#189768); +#189767 = CARTESIAN_POINT('',(141.9,-86.352412,0.)); +#189768 = VECTOR('',#189769,1.); +#189769 = DIRECTION('',(0.,0.,-1.)); +#189770 = ORIENTED_EDGE('',*,*,#189771,.F.); +#189771 = EDGE_CURVE('',#189733,#189764,#189772,.T.); +#189772 = LINE('',#189773,#189774); +#189773 = CARTESIAN_POINT('',(136.574995,-91.677416,0.)); +#189774 = VECTOR('',#189775,1.); +#189775 = DIRECTION('',(0.707106847581,0.707106714792,0.)); +#189776 = PLANE('',#189777); +#189777 = AXIS2_PLACEMENT_3D('',#189778,#189779,#189780); +#189778 = CARTESIAN_POINT('',(136.574995,-91.677416,0.)); +#189779 = DIRECTION('',(0.707106714792,-0.707106847581,0.)); +#189780 = DIRECTION('',(0.707106847581,0.707106714792,0.)); +#189781 = ADVANCED_FACE('',(#189782),#189807,.F.); +#189782 = FACE_BOUND('',#189783,.F.); +#189783 = EDGE_LOOP('',(#189784,#189785,#189793,#189801)); +#189784 = ORIENTED_EDGE('',*,*,#189763,.T.); +#189785 = ORIENTED_EDGE('',*,*,#189786,.T.); +#189786 = EDGE_CURVE('',#189756,#189787,#189789,.T.); +#189787 = VERTEX_POINT('',#189788); +#189788 = CARTESIAN_POINT('',(141.9,-84.78113,-3.5E-02)); +#189789 = LINE('',#189790,#189791); +#189790 = CARTESIAN_POINT('',(141.9,-86.352412,-3.5E-02)); +#189791 = VECTOR('',#189792,1.); +#189792 = DIRECTION('',(0.,1.,0.)); +#189793 = ORIENTED_EDGE('',*,*,#189794,.F.); +#189794 = EDGE_CURVE('',#189795,#189787,#189797,.T.); +#189795 = VERTEX_POINT('',#189796); +#189796 = CARTESIAN_POINT('',(141.9,-84.78113,0.)); +#189797 = LINE('',#189798,#189799); +#189798 = CARTESIAN_POINT('',(141.9,-84.78113,0.)); +#189799 = VECTOR('',#189800,1.); +#189800 = DIRECTION('',(0.,0.,-1.)); +#189801 = ORIENTED_EDGE('',*,*,#189802,.F.); +#189802 = EDGE_CURVE('',#189764,#189795,#189803,.T.); +#189803 = LINE('',#189804,#189805); +#189804 = CARTESIAN_POINT('',(141.9,-86.352412,0.)); +#189805 = VECTOR('',#189806,1.); +#189806 = DIRECTION('',(0.,1.,0.)); +#189807 = PLANE('',#189808); +#189808 = AXIS2_PLACEMENT_3D('',#189809,#189810,#189811); +#189809 = CARTESIAN_POINT('',(141.9,-86.352412,0.)); +#189810 = DIRECTION('',(1.,-0.,0.)); +#189811 = DIRECTION('',(0.,1.,0.)); +#189812 = ADVANCED_FACE('',(#189813),#189838,.F.); +#189813 = FACE_BOUND('',#189814,.F.); +#189814 = EDGE_LOOP('',(#189815,#189816,#189824,#189832)); +#189815 = ORIENTED_EDGE('',*,*,#189794,.T.); +#189816 = ORIENTED_EDGE('',*,*,#189817,.T.); +#189817 = EDGE_CURVE('',#189787,#189818,#189820,.T.); +#189818 = VERTEX_POINT('',#189819); +#189819 = CARTESIAN_POINT('',(141.885195,-84.777164,-3.5E-02)); +#189820 = LINE('',#189821,#189822); +#189821 = CARTESIAN_POINT('',(141.9,-84.78113,-3.5E-02)); +#189822 = VECTOR('',#189823,1.); +#189823 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#189824 = ORIENTED_EDGE('',*,*,#189825,.F.); +#189825 = EDGE_CURVE('',#189826,#189818,#189828,.T.); +#189826 = VERTEX_POINT('',#189827); +#189827 = CARTESIAN_POINT('',(141.885195,-84.777164,0.)); +#189828 = LINE('',#189829,#189830); +#189829 = CARTESIAN_POINT('',(141.885195,-84.777164,0.)); +#189830 = VECTOR('',#189831,1.); +#189831 = DIRECTION('',(0.,0.,-1.)); +#189832 = ORIENTED_EDGE('',*,*,#189833,.F.); +#189833 = EDGE_CURVE('',#189795,#189826,#189834,.T.); +#189834 = LINE('',#189835,#189836); +#189835 = CARTESIAN_POINT('',(141.9,-84.78113,0.)); +#189836 = VECTOR('',#189837,1.); +#189837 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#189838 = PLANE('',#189839); +#189839 = AXIS2_PLACEMENT_3D('',#189840,#189841,#189842); +#189840 = CARTESIAN_POINT('',(141.9,-84.78113,0.)); +#189841 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#189842 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#189843 = ADVANCED_FACE('',(#189844),#189871,.T.); +#189844 = FACE_BOUND('',#189845,.F.); +#189845 = EDGE_LOOP('',(#189846,#189847,#189856,#189864)); +#189846 = ORIENTED_EDGE('',*,*,#189825,.T.); +#189847 = ORIENTED_EDGE('',*,*,#189848,.T.); +#189848 = EDGE_CURVE('',#189818,#189849,#189851,.T.); +#189849 = VERTEX_POINT('',#189850); +#189850 = CARTESIAN_POINT('',(142.114805,-84.777164,-3.5E-02)); +#189851 = CIRCLE('',#189852,0.299999472923); +#189852 = AXIS2_PLACEMENT_3D('',#189853,#189854,#189855); +#189853 = CARTESIAN_POINT('',(142.,-84.50000069844,-3.5E-02)); +#189854 = DIRECTION('',(0.,0.,-1.)); +#189855 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#189856 = ORIENTED_EDGE('',*,*,#189857,.F.); +#189857 = EDGE_CURVE('',#189858,#189849,#189860,.T.); +#189858 = VERTEX_POINT('',#189859); +#189859 = CARTESIAN_POINT('',(142.114805,-84.777164,0.)); +#189860 = LINE('',#189861,#189862); +#189861 = CARTESIAN_POINT('',(142.114805,-84.777164,0.)); +#189862 = VECTOR('',#189863,1.); +#189863 = DIRECTION('',(0.,0.,-1.)); +#189864 = ORIENTED_EDGE('',*,*,#189865,.F.); +#189865 = EDGE_CURVE('',#189826,#189858,#189866,.T.); +#189866 = CIRCLE('',#189867,0.299999472923); +#189867 = AXIS2_PLACEMENT_3D('',#189868,#189869,#189870); +#189868 = CARTESIAN_POINT('',(142.,-84.50000069844,0.)); +#189869 = DIRECTION('',(0.,0.,-1.)); +#189870 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#189871 = CYLINDRICAL_SURFACE('',#189872,0.299999472923); +#189872 = AXIS2_PLACEMENT_3D('',#189873,#189874,#189875); +#189873 = CARTESIAN_POINT('',(142.,-84.50000069844,0.)); +#189874 = DIRECTION('',(-0.,-0.,1.)); +#189875 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#189876 = ADVANCED_FACE('',(#189877),#189893,.F.); +#189877 = FACE_BOUND('',#189878,.F.); +#189878 = EDGE_LOOP('',(#189879,#189880,#189886,#189887)); +#189879 = ORIENTED_EDGE('',*,*,#189857,.T.); +#189880 = ORIENTED_EDGE('',*,*,#189881,.T.); +#189881 = EDGE_CURVE('',#189849,#189560,#189882,.T.); +#189882 = LINE('',#189883,#189884); +#189883 = CARTESIAN_POINT('',(142.114805,-84.777164,-3.5E-02)); +#189884 = VECTOR('',#189885,1.); +#189885 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#189886 = ORIENTED_EDGE('',*,*,#189557,.F.); +#189887 = ORIENTED_EDGE('',*,*,#189888,.F.); +#189888 = EDGE_CURVE('',#189858,#189558,#189889,.T.); +#189889 = LINE('',#189890,#189891); +#189890 = CARTESIAN_POINT('',(142.114805,-84.777164,0.)); +#189891 = VECTOR('',#189892,1.); +#189892 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#189893 = PLANE('',#189894); +#189894 = AXIS2_PLACEMENT_3D('',#189895,#189896,#189897); +#189895 = CARTESIAN_POINT('',(142.114805,-84.777164,0.)); +#189896 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#189897 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#189898 = ADVANCED_FACE('',(#189899),#189926,.F.); +#189899 = FACE_BOUND('',#189900,.F.); +#189900 = EDGE_LOOP('',(#189901,#189911,#189918,#189919)); +#189901 = ORIENTED_EDGE('',*,*,#189902,.T.); +#189902 = EDGE_CURVE('',#189903,#189905,#189907,.T.); +#189903 = VERTEX_POINT('',#189904); +#189904 = CARTESIAN_POINT('',(136.584172,-91.946917,0.)); +#189905 = VERTEX_POINT('',#189906); +#189906 = CARTESIAN_POINT('',(136.584172,-91.946917,-3.5E-02)); +#189907 = LINE('',#189908,#189909); +#189908 = CARTESIAN_POINT('',(136.584172,-91.946917,0.)); +#189909 = VECTOR('',#189910,1.); +#189910 = DIRECTION('',(0.,0.,-1.)); +#189911 = ORIENTED_EDGE('',*,*,#189912,.T.); +#189912 = EDGE_CURVE('',#189905,#189905,#189913,.T.); +#189913 = CIRCLE('',#189914,0.137255); +#189914 = AXIS2_PLACEMENT_3D('',#189915,#189916,#189917); +#189915 = CARTESIAN_POINT('',(136.446917,-91.946917,-3.5E-02)); +#189916 = DIRECTION('',(0.,0.,1.)); +#189917 = DIRECTION('',(1.,0.,-0.)); +#189918 = ORIENTED_EDGE('',*,*,#189902,.F.); +#189919 = ORIENTED_EDGE('',*,*,#189920,.F.); +#189920 = EDGE_CURVE('',#189903,#189903,#189921,.T.); +#189921 = CIRCLE('',#189922,0.137255); +#189922 = AXIS2_PLACEMENT_3D('',#189923,#189924,#189925); +#189923 = CARTESIAN_POINT('',(136.446917,-91.946917,0.)); +#189924 = DIRECTION('',(0.,0.,1.)); +#189925 = DIRECTION('',(1.,0.,-0.)); +#189926 = CYLINDRICAL_SURFACE('',#189927,0.137255); +#189927 = AXIS2_PLACEMENT_3D('',#189928,#189929,#189930); +#189928 = CARTESIAN_POINT('',(136.446917,-91.946917,0.)); +#189929 = DIRECTION('',(0.,0.,1.)); +#189930 = DIRECTION('',(1.,0.,-0.)); +#189931 = ADVANCED_FACE('',(#189932),#189959,.F.); +#189932 = FACE_BOUND('',#189933,.F.); +#189933 = EDGE_LOOP('',(#189934,#189944,#189951,#189952)); +#189934 = ORIENTED_EDGE('',*,*,#189935,.T.); +#189935 = EDGE_CURVE('',#189936,#189938,#189940,.T.); +#189936 = VERTEX_POINT('',#189937); +#189937 = CARTESIAN_POINT('',(142.137255,-84.5,0.)); +#189938 = VERTEX_POINT('',#189939); +#189939 = CARTESIAN_POINT('',(142.137255,-84.5,-3.5E-02)); +#189940 = LINE('',#189941,#189942); +#189941 = CARTESIAN_POINT('',(142.137255,-84.5,0.)); +#189942 = VECTOR('',#189943,1.); +#189943 = DIRECTION('',(0.,0.,-1.)); +#189944 = ORIENTED_EDGE('',*,*,#189945,.T.); +#189945 = EDGE_CURVE('',#189938,#189938,#189946,.T.); +#189946 = CIRCLE('',#189947,0.137255); +#189947 = AXIS2_PLACEMENT_3D('',#189948,#189949,#189950); +#189948 = CARTESIAN_POINT('',(142.,-84.5,-3.5E-02)); +#189949 = DIRECTION('',(0.,0.,1.)); +#189950 = DIRECTION('',(1.,0.,-0.)); +#189951 = ORIENTED_EDGE('',*,*,#189935,.F.); +#189952 = ORIENTED_EDGE('',*,*,#189953,.F.); +#189953 = EDGE_CURVE('',#189936,#189936,#189954,.T.); +#189954 = CIRCLE('',#189955,0.137255); +#189955 = AXIS2_PLACEMENT_3D('',#189956,#189957,#189958); +#189956 = CARTESIAN_POINT('',(142.,-84.5,0.)); +#189957 = DIRECTION('',(0.,0.,1.)); +#189958 = DIRECTION('',(1.,0.,-0.)); +#189959 = CYLINDRICAL_SURFACE('',#189960,0.137255); +#189960 = AXIS2_PLACEMENT_3D('',#189961,#189962,#189963); +#189961 = CARTESIAN_POINT('',(142.,-84.5,0.)); +#189962 = DIRECTION('',(0.,0.,1.)); +#189963 = DIRECTION('',(1.,0.,-0.)); +#189964 = ADVANCED_FACE('',(#189965,#189978,#189981),#189984,.F.); +#189965 = FACE_BOUND('',#189966,.F.); +#189966 = EDGE_LOOP('',(#189967,#189968,#189969,#189970,#189971,#189972, + #189973,#189974,#189975,#189976,#189977)); +#189967 = ORIENTED_EDGE('',*,*,#189583,.T.); +#189968 = ORIENTED_EDGE('',*,*,#189614,.T.); +#189969 = ORIENTED_EDGE('',*,*,#189645,.T.); +#189970 = ORIENTED_EDGE('',*,*,#189676,.T.); +#189971 = ORIENTED_EDGE('',*,*,#189708,.T.); +#189972 = ORIENTED_EDGE('',*,*,#189740,.T.); +#189973 = ORIENTED_EDGE('',*,*,#189771,.T.); +#189974 = ORIENTED_EDGE('',*,*,#189802,.T.); +#189975 = ORIENTED_EDGE('',*,*,#189833,.T.); +#189976 = ORIENTED_EDGE('',*,*,#189865,.T.); +#189977 = ORIENTED_EDGE('',*,*,#189888,.T.); +#189978 = FACE_BOUND('',#189979,.F.); +#189979 = EDGE_LOOP('',(#189980)); +#189980 = ORIENTED_EDGE('',*,*,#189920,.T.); +#189981 = FACE_BOUND('',#189982,.F.); +#189982 = EDGE_LOOP('',(#189983)); +#189983 = ORIENTED_EDGE('',*,*,#189953,.T.); +#189984 = PLANE('',#189985); +#189985 = AXIS2_PLACEMENT_3D('',#189986,#189987,#189988); +#189986 = CARTESIAN_POINT('',(0.,0.,0.)); +#189987 = DIRECTION('',(-0.,-0.,-1.)); +#189988 = DIRECTION('',(-1.,0.,0.)); +#189989 = ADVANCED_FACE('',(#189990,#190003,#190006),#190009,.T.); +#189990 = FACE_BOUND('',#189991,.T.); +#189991 = EDGE_LOOP('',(#189992,#189993,#189994,#189995,#189996,#189997, + #189998,#189999,#190000,#190001,#190002)); +#189992 = ORIENTED_EDGE('',*,*,#189567,.T.); +#189993 = ORIENTED_EDGE('',*,*,#189598,.T.); +#189994 = ORIENTED_EDGE('',*,*,#189629,.T.); +#189995 = ORIENTED_EDGE('',*,*,#189660,.T.); +#189996 = ORIENTED_EDGE('',*,*,#189691,.T.); +#189997 = ORIENTED_EDGE('',*,*,#189724,.T.); +#189998 = ORIENTED_EDGE('',*,*,#189755,.T.); +#189999 = ORIENTED_EDGE('',*,*,#189786,.T.); +#190000 = ORIENTED_EDGE('',*,*,#189817,.T.); +#190001 = ORIENTED_EDGE('',*,*,#189848,.T.); +#190002 = ORIENTED_EDGE('',*,*,#189881,.T.); +#190003 = FACE_BOUND('',#190004,.T.); +#190004 = EDGE_LOOP('',(#190005)); +#190005 = ORIENTED_EDGE('',*,*,#189912,.T.); +#190006 = FACE_BOUND('',#190007,.T.); +#190007 = EDGE_LOOP('',(#190008)); +#190008 = ORIENTED_EDGE('',*,*,#189945,.T.); +#190009 = PLANE('',#190010); +#190010 = AXIS2_PLACEMENT_3D('',#190011,#190012,#190013); +#190011 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#190012 = DIRECTION('',(-0.,-0.,-1.)); +#190013 = DIRECTION('',(-1.,0.,0.)); +#190014 = MANIFOLD_SOLID_BREP('',#190015); +#190015 = CLOSED_SHELL('',(#190016,#190056,#190087,#190120,#190151, + #190182,#190215,#190246,#190279,#190301,#190334,#190354)); +#190016 = ADVANCED_FACE('',(#190017),#190051,.T.); +#190017 = FACE_BOUND('',#190018,.T.); +#190018 = EDGE_LOOP('',(#190019,#190029,#190037,#190045)); +#190019 = ORIENTED_EDGE('',*,*,#190020,.T.); +#190020 = EDGE_CURVE('',#190021,#190023,#190025,.T.); +#190021 = VERTEX_POINT('',#190022); +#190022 = CARTESIAN_POINT('',(135.773079,-111.344509,1.51)); +#190023 = VERTEX_POINT('',#190024); +#190024 = CARTESIAN_POINT('',(135.773079,-111.344509,1.545)); +#190025 = LINE('',#190026,#190027); +#190026 = CARTESIAN_POINT('',(135.773079,-111.344509,1.51)); +#190027 = VECTOR('',#190028,1.); +#190028 = DIRECTION('',(0.,0.,1.)); +#190029 = ORIENTED_EDGE('',*,*,#190030,.T.); +#190030 = EDGE_CURVE('',#190023,#190031,#190033,.T.); +#190031 = VERTEX_POINT('',#190032); +#190032 = CARTESIAN_POINT('',(135.758147,-111.380557,1.545)); +#190033 = LINE('',#190034,#190035); +#190034 = CARTESIAN_POINT('',(135.773079,-111.344509,1.545)); +#190035 = VECTOR('',#190036,1.); +#190036 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190037 = ORIENTED_EDGE('',*,*,#190038,.F.); +#190038 = EDGE_CURVE('',#190039,#190031,#190041,.T.); +#190039 = VERTEX_POINT('',#190040); +#190040 = CARTESIAN_POINT('',(135.758147,-111.380557,1.51)); +#190041 = LINE('',#190042,#190043); +#190042 = CARTESIAN_POINT('',(135.758147,-111.380557,1.51)); +#190043 = VECTOR('',#190044,1.); +#190044 = DIRECTION('',(0.,0.,1.)); +#190045 = ORIENTED_EDGE('',*,*,#190046,.F.); +#190046 = EDGE_CURVE('',#190021,#190039,#190047,.T.); +#190047 = LINE('',#190048,#190049); +#190048 = CARTESIAN_POINT('',(135.773079,-111.344509,1.51)); +#190049 = VECTOR('',#190050,1.); +#190050 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190051 = PLANE('',#190052); +#190052 = AXIS2_PLACEMENT_3D('',#190053,#190054,#190055); +#190053 = CARTESIAN_POINT('',(135.773079,-111.344509,1.51)); +#190054 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#190055 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190056 = ADVANCED_FACE('',(#190057),#190082,.T.); +#190057 = FACE_BOUND('',#190058,.T.); +#190058 = EDGE_LOOP('',(#190059,#190060,#190068,#190076)); +#190059 = ORIENTED_EDGE('',*,*,#190038,.T.); +#190060 = ORIENTED_EDGE('',*,*,#190061,.T.); +#190061 = EDGE_CURVE('',#190031,#190062,#190064,.T.); +#190062 = VERTEX_POINT('',#190063); +#190063 = CARTESIAN_POINT('',(134.555557,-112.583147,1.545)); +#190064 = LINE('',#190065,#190066); +#190065 = CARTESIAN_POINT('',(135.758147,-111.380557,1.545)); +#190066 = VECTOR('',#190067,1.); +#190067 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#190068 = ORIENTED_EDGE('',*,*,#190069,.F.); +#190069 = EDGE_CURVE('',#190070,#190062,#190072,.T.); +#190070 = VERTEX_POINT('',#190071); +#190071 = CARTESIAN_POINT('',(134.555557,-112.583147,1.51)); +#190072 = LINE('',#190073,#190074); +#190073 = CARTESIAN_POINT('',(134.555557,-112.583147,1.51)); +#190074 = VECTOR('',#190075,1.); +#190075 = DIRECTION('',(0.,0.,1.)); +#190076 = ORIENTED_EDGE('',*,*,#190077,.F.); +#190077 = EDGE_CURVE('',#190039,#190070,#190078,.T.); +#190078 = LINE('',#190079,#190080); +#190079 = CARTESIAN_POINT('',(135.758147,-111.380557,1.51)); +#190080 = VECTOR('',#190081,1.); +#190081 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#190082 = PLANE('',#190083); +#190083 = AXIS2_PLACEMENT_3D('',#190084,#190085,#190086); +#190084 = CARTESIAN_POINT('',(135.758147,-111.380557,1.51)); +#190085 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#190086 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#190087 = ADVANCED_FACE('',(#190088),#190115,.T.); +#190088 = FACE_BOUND('',#190089,.T.); +#190089 = EDGE_LOOP('',(#190090,#190091,#190100,#190108)); +#190090 = ORIENTED_EDGE('',*,*,#190069,.T.); +#190091 = ORIENTED_EDGE('',*,*,#190092,.T.); +#190092 = EDGE_CURVE('',#190062,#190093,#190095,.T.); +#190093 = VERTEX_POINT('',#190094); +#190094 = CARTESIAN_POINT('',(134.416853,-112.444443,1.545)); +#190095 = CIRCLE('',#190096,0.10000001929); +#190096 = AXIS2_PLACEMENT_3D('',#190097,#190098,#190099); +#190097 = CARTESIAN_POINT('',(134.5,-112.5,1.545)); +#190098 = DIRECTION('',(0.,0.,-1.)); +#190099 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#190100 = ORIENTED_EDGE('',*,*,#190101,.F.); +#190101 = EDGE_CURVE('',#190102,#190093,#190104,.T.); +#190102 = VERTEX_POINT('',#190103); +#190103 = CARTESIAN_POINT('',(134.416853,-112.444443,1.51)); +#190104 = LINE('',#190105,#190106); +#190105 = CARTESIAN_POINT('',(134.416853,-112.444443,1.51)); +#190106 = VECTOR('',#190107,1.); +#190107 = DIRECTION('',(0.,0.,1.)); +#190108 = ORIENTED_EDGE('',*,*,#190109,.F.); +#190109 = EDGE_CURVE('',#190070,#190102,#190110,.T.); +#190110 = CIRCLE('',#190111,0.10000001929); +#190111 = AXIS2_PLACEMENT_3D('',#190112,#190113,#190114); +#190112 = CARTESIAN_POINT('',(134.5,-112.5,1.51)); +#190113 = DIRECTION('',(0.,0.,-1.)); +#190114 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#190115 = CYLINDRICAL_SURFACE('',#190116,0.10000001929); +#190116 = AXIS2_PLACEMENT_3D('',#190117,#190118,#190119); +#190117 = CARTESIAN_POINT('',(134.5,-112.5,1.51)); +#190118 = DIRECTION('',(0.,0.,-1.)); +#190119 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#190120 = ADVANCED_FACE('',(#190121),#190146,.T.); +#190121 = FACE_BOUND('',#190122,.T.); +#190122 = EDGE_LOOP('',(#190123,#190124,#190132,#190140)); +#190123 = ORIENTED_EDGE('',*,*,#190101,.T.); +#190124 = ORIENTED_EDGE('',*,*,#190125,.T.); +#190125 = EDGE_CURVE('',#190093,#190126,#190128,.T.); +#190126 = VERTEX_POINT('',#190127); +#190127 = CARTESIAN_POINT('',(135.575,-111.283578,1.545)); +#190128 = LINE('',#190129,#190130); +#190129 = CARTESIAN_POINT('',(134.416853,-112.444443,1.545)); +#190130 = VECTOR('',#190131,1.); +#190131 = DIRECTION('',(0.706277530971,0.707935060049,0.)); +#190132 = ORIENTED_EDGE('',*,*,#190133,.F.); +#190133 = EDGE_CURVE('',#190134,#190126,#190136,.T.); +#190134 = VERTEX_POINT('',#190135); +#190135 = CARTESIAN_POINT('',(135.575,-111.283578,1.51)); +#190136 = LINE('',#190137,#190138); +#190137 = CARTESIAN_POINT('',(135.575,-111.283578,1.51)); +#190138 = VECTOR('',#190139,1.); +#190139 = DIRECTION('',(0.,0.,1.)); +#190140 = ORIENTED_EDGE('',*,*,#190141,.F.); +#190141 = EDGE_CURVE('',#190102,#190134,#190142,.T.); +#190142 = LINE('',#190143,#190144); +#190143 = CARTESIAN_POINT('',(134.416853,-112.444443,1.51)); +#190144 = VECTOR('',#190145,1.); +#190145 = DIRECTION('',(0.706277530971,0.707935060049,0.)); +#190146 = PLANE('',#190147); +#190147 = AXIS2_PLACEMENT_3D('',#190148,#190149,#190150); +#190148 = CARTESIAN_POINT('',(134.416853,-112.444443,1.51)); +#190149 = DIRECTION('',(-0.707935060049,0.706277530971,0.)); +#190150 = DIRECTION('',(0.706277530971,0.707935060049,0.)); +#190151 = ADVANCED_FACE('',(#190152),#190177,.T.); +#190152 = FACE_BOUND('',#190153,.T.); +#190153 = EDGE_LOOP('',(#190154,#190155,#190163,#190171)); +#190154 = ORIENTED_EDGE('',*,*,#190133,.T.); +#190155 = ORIENTED_EDGE('',*,*,#190156,.T.); +#190156 = EDGE_CURVE('',#190126,#190157,#190159,.T.); +#190157 = VERTEX_POINT('',#190158); +#190158 = CARTESIAN_POINT('',(135.575,-93.602652,1.545)); +#190159 = LINE('',#190160,#190161); +#190160 = CARTESIAN_POINT('',(135.575,-111.283578,1.545)); +#190161 = VECTOR('',#190162,1.); +#190162 = DIRECTION('',(0.,1.,0.)); +#190163 = ORIENTED_EDGE('',*,*,#190164,.F.); +#190164 = EDGE_CURVE('',#190165,#190157,#190167,.T.); +#190165 = VERTEX_POINT('',#190166); +#190166 = CARTESIAN_POINT('',(135.575,-93.602652,1.51)); +#190167 = LINE('',#190168,#190169); +#190168 = CARTESIAN_POINT('',(135.575,-93.602652,1.51)); +#190169 = VECTOR('',#190170,1.); +#190170 = DIRECTION('',(0.,0.,1.)); +#190171 = ORIENTED_EDGE('',*,*,#190172,.F.); +#190172 = EDGE_CURVE('',#190134,#190165,#190173,.T.); +#190173 = LINE('',#190174,#190175); +#190174 = CARTESIAN_POINT('',(135.575,-111.283578,1.51)); +#190175 = VECTOR('',#190176,1.); +#190176 = DIRECTION('',(0.,1.,0.)); +#190177 = PLANE('',#190178); +#190178 = AXIS2_PLACEMENT_3D('',#190179,#190180,#190181); +#190179 = CARTESIAN_POINT('',(135.575,-111.283578,1.51)); +#190180 = DIRECTION('',(-1.,0.,0.)); +#190181 = DIRECTION('',(0.,1.,0.)); +#190182 = ADVANCED_FACE('',(#190183),#190210,.T.); +#190183 = FACE_BOUND('',#190184,.T.); +#190184 = EDGE_LOOP('',(#190185,#190186,#190195,#190203)); +#190185 = ORIENTED_EDGE('',*,*,#190164,.T.); +#190186 = ORIENTED_EDGE('',*,*,#190187,.T.); +#190187 = EDGE_CURVE('',#190157,#190188,#190190,.T.); +#190188 = VERTEX_POINT('',#190189); +#190189 = CARTESIAN_POINT('',(135.518989,-93.386783,1.545)); +#190190 = CIRCLE('',#190191,0.291378493798); +#190191 = AXIS2_PLACEMENT_3D('',#190192,#190193,#190194); +#190192 = CARTESIAN_POINT('',(135.80756359839,-93.4271082751,1.545)); +#190193 = DIRECTION('',(0.,0.,-1.)); +#190194 = DIRECTION('',(-0.798149497442,-0.602459442397,-0.)); +#190195 = ORIENTED_EDGE('',*,*,#190196,.F.); +#190196 = EDGE_CURVE('',#190197,#190188,#190199,.T.); +#190197 = VERTEX_POINT('',#190198); +#190198 = CARTESIAN_POINT('',(135.518989,-93.386783,1.51)); +#190199 = LINE('',#190200,#190201); +#190200 = CARTESIAN_POINT('',(135.518989,-93.386783,1.51)); +#190201 = VECTOR('',#190202,1.); +#190202 = DIRECTION('',(0.,0.,1.)); +#190203 = ORIENTED_EDGE('',*,*,#190204,.F.); +#190204 = EDGE_CURVE('',#190165,#190197,#190205,.T.); +#190205 = CIRCLE('',#190206,0.291378493798); +#190206 = AXIS2_PLACEMENT_3D('',#190207,#190208,#190209); +#190207 = CARTESIAN_POINT('',(135.80756359839,-93.4271082751,1.51)); +#190208 = DIRECTION('',(0.,0.,-1.)); +#190209 = DIRECTION('',(-0.798149497442,-0.602459442397,-0.)); +#190210 = CYLINDRICAL_SURFACE('',#190211,0.291378493798); +#190211 = AXIS2_PLACEMENT_3D('',#190212,#190213,#190214); +#190212 = CARTESIAN_POINT('',(135.80756359839,-93.4271082751,1.51)); +#190213 = DIRECTION('',(0.,0.,-1.)); +#190214 = DIRECTION('',(-0.798149497442,-0.602459442397,-0.)); +#190215 = ADVANCED_FACE('',(#190216),#190241,.T.); +#190216 = FACE_BOUND('',#190217,.T.); +#190217 = EDGE_LOOP('',(#190218,#190219,#190227,#190235)); +#190218 = ORIENTED_EDGE('',*,*,#190196,.T.); +#190219 = ORIENTED_EDGE('',*,*,#190220,.T.); +#190220 = EDGE_CURVE('',#190188,#190221,#190223,.T.); +#190221 = VERTEX_POINT('',#190222); +#190222 = CARTESIAN_POINT('',(135.539258,-93.311136,1.545)); +#190223 = LINE('',#190224,#190225); +#190224 = CARTESIAN_POINT('',(135.518989,-93.386783,1.545)); +#190225 = VECTOR('',#190226,1.); +#190226 = DIRECTION('',(0.258812462159,0.965927590159,0.)); +#190227 = ORIENTED_EDGE('',*,*,#190228,.F.); +#190228 = EDGE_CURVE('',#190229,#190221,#190231,.T.); +#190229 = VERTEX_POINT('',#190230); +#190230 = CARTESIAN_POINT('',(135.539258,-93.311136,1.51)); +#190231 = LINE('',#190232,#190233); +#190232 = CARTESIAN_POINT('',(135.539258,-93.311136,1.51)); +#190233 = VECTOR('',#190234,1.); +#190234 = DIRECTION('',(0.,0.,1.)); +#190235 = ORIENTED_EDGE('',*,*,#190236,.F.); +#190236 = EDGE_CURVE('',#190197,#190229,#190237,.T.); +#190237 = LINE('',#190238,#190239); +#190238 = CARTESIAN_POINT('',(135.518989,-93.386783,1.51)); +#190239 = VECTOR('',#190240,1.); +#190240 = DIRECTION('',(0.258812462159,0.965927590159,0.)); +#190241 = PLANE('',#190242); +#190242 = AXIS2_PLACEMENT_3D('',#190243,#190244,#190245); +#190243 = CARTESIAN_POINT('',(135.518989,-93.386783,1.51)); +#190244 = DIRECTION('',(-0.965927590159,0.258812462159,0.)); +#190245 = DIRECTION('',(0.258812462159,0.965927590159,0.)); +#190246 = ADVANCED_FACE('',(#190247),#190274,.T.); +#190247 = FACE_BOUND('',#190248,.T.); +#190248 = EDGE_LOOP('',(#190249,#190250,#190259,#190267)); +#190249 = ORIENTED_EDGE('',*,*,#190228,.T.); +#190250 = ORIENTED_EDGE('',*,*,#190251,.T.); +#190251 = EDGE_CURVE('',#190221,#190252,#190254,.T.); +#190252 = VERTEX_POINT('',#190253); +#190253 = CARTESIAN_POINT('',(135.775,-93.722767,1.545)); +#190254 = CIRCLE('',#190255,0.299783115045); +#190255 = AXIS2_PLACEMENT_3D('',#190256,#190257,#190258); +#190256 = CARTESIAN_POINT('',(135.81623188428,-93.42583292013,1.545)); +#190257 = DIRECTION('',(0.,0.,-1.)); +#190258 = DIRECTION('',(-0.923914224608,0.382599667494,0.)); +#190259 = ORIENTED_EDGE('',*,*,#190260,.F.); +#190260 = EDGE_CURVE('',#190261,#190252,#190263,.T.); +#190261 = VERTEX_POINT('',#190262); +#190262 = CARTESIAN_POINT('',(135.775,-93.722767,1.51)); +#190263 = LINE('',#190264,#190265); +#190264 = CARTESIAN_POINT('',(135.775,-93.722767,1.51)); +#190265 = VECTOR('',#190266,1.); +#190266 = DIRECTION('',(0.,0.,1.)); +#190267 = ORIENTED_EDGE('',*,*,#190268,.F.); +#190268 = EDGE_CURVE('',#190229,#190261,#190269,.T.); +#190269 = CIRCLE('',#190270,0.299783115045); +#190270 = AXIS2_PLACEMENT_3D('',#190271,#190272,#190273); +#190271 = CARTESIAN_POINT('',(135.81623188428,-93.42583292013,1.51)); +#190272 = DIRECTION('',(0.,0.,-1.)); +#190273 = DIRECTION('',(-0.923914224608,0.382599667494,0.)); +#190274 = CYLINDRICAL_SURFACE('',#190275,0.299783115045); +#190275 = AXIS2_PLACEMENT_3D('',#190276,#190277,#190278); +#190276 = CARTESIAN_POINT('',(135.81623188428,-93.42583292013,1.51)); +#190277 = DIRECTION('',(0.,0.,-1.)); +#190278 = DIRECTION('',(-0.923914224608,0.382599667494,0.)); +#190279 = ADVANCED_FACE('',(#190280),#190296,.T.); +#190280 = FACE_BOUND('',#190281,.T.); +#190281 = EDGE_LOOP('',(#190282,#190283,#190289,#190290)); +#190282 = ORIENTED_EDGE('',*,*,#190260,.T.); +#190283 = ORIENTED_EDGE('',*,*,#190284,.T.); +#190284 = EDGE_CURVE('',#190252,#190023,#190285,.T.); +#190285 = LINE('',#190286,#190287); +#190286 = CARTESIAN_POINT('',(135.775,-93.722767,1.545)); +#190287 = VECTOR('',#190288,1.); +#190288 = DIRECTION('',(-1.090130583342E-04,-0.999999994058,0.)); +#190289 = ORIENTED_EDGE('',*,*,#190020,.F.); +#190290 = ORIENTED_EDGE('',*,*,#190291,.F.); +#190291 = EDGE_CURVE('',#190261,#190021,#190292,.T.); +#190292 = LINE('',#190293,#190294); +#190293 = CARTESIAN_POINT('',(135.775,-93.722767,1.51)); +#190294 = VECTOR('',#190295,1.); +#190295 = DIRECTION('',(-1.090130583342E-04,-0.999999994058,0.)); +#190296 = PLANE('',#190297); +#190297 = AXIS2_PLACEMENT_3D('',#190298,#190299,#190300); +#190298 = CARTESIAN_POINT('',(135.775,-93.722767,1.51)); +#190299 = DIRECTION('',(0.999999994058,-1.090130583342E-04,0.)); +#190300 = DIRECTION('',(-1.090130583342E-04,-0.999999994058,0.)); +#190301 = ADVANCED_FACE('',(#190302),#190329,.F.); +#190302 = FACE_BOUND('',#190303,.T.); +#190303 = EDGE_LOOP('',(#190304,#190314,#190321,#190322)); +#190304 = ORIENTED_EDGE('',*,*,#190305,.T.); +#190305 = EDGE_CURVE('',#190306,#190308,#190310,.T.); +#190306 = VERTEX_POINT('',#190307); +#190307 = CARTESIAN_POINT('',(135.953677,-93.425941,1.51)); +#190308 = VERTEX_POINT('',#190309); +#190309 = CARTESIAN_POINT('',(135.953677,-93.425941,1.545)); +#190310 = LINE('',#190311,#190312); +#190311 = CARTESIAN_POINT('',(135.953677,-93.425941,1.51)); +#190312 = VECTOR('',#190313,1.); +#190313 = DIRECTION('',(0.,0.,1.)); +#190314 = ORIENTED_EDGE('',*,*,#190315,.T.); +#190315 = EDGE_CURVE('',#190308,#190308,#190316,.T.); +#190316 = CIRCLE('',#190317,0.137255); +#190317 = AXIS2_PLACEMENT_3D('',#190318,#190319,#190320); +#190318 = CARTESIAN_POINT('',(135.816422,-93.425941,1.545)); +#190319 = DIRECTION('',(0.,0.,1.)); +#190320 = DIRECTION('',(1.,0.,-0.)); +#190321 = ORIENTED_EDGE('',*,*,#190305,.F.); +#190322 = ORIENTED_EDGE('',*,*,#190323,.F.); +#190323 = EDGE_CURVE('',#190306,#190306,#190324,.T.); +#190324 = CIRCLE('',#190325,0.137255); +#190325 = AXIS2_PLACEMENT_3D('',#190326,#190327,#190328); +#190326 = CARTESIAN_POINT('',(135.816422,-93.425941,1.51)); +#190327 = DIRECTION('',(0.,0.,1.)); +#190328 = DIRECTION('',(1.,0.,-0.)); +#190329 = CYLINDRICAL_SURFACE('',#190330,0.137255); +#190330 = AXIS2_PLACEMENT_3D('',#190331,#190332,#190333); +#190331 = CARTESIAN_POINT('',(135.816422,-93.425941,1.51)); +#190332 = DIRECTION('',(-0.,-0.,-1.)); +#190333 = DIRECTION('',(1.,0.,-0.)); +#190334 = ADVANCED_FACE('',(#190335,#190346),#190349,.F.); +#190335 = FACE_BOUND('',#190336,.T.); +#190336 = EDGE_LOOP('',(#190337,#190338,#190339,#190340,#190341,#190342, + #190343,#190344,#190345)); +#190337 = ORIENTED_EDGE('',*,*,#190046,.T.); +#190338 = ORIENTED_EDGE('',*,*,#190077,.T.); +#190339 = ORIENTED_EDGE('',*,*,#190109,.T.); +#190340 = ORIENTED_EDGE('',*,*,#190141,.T.); +#190341 = ORIENTED_EDGE('',*,*,#190172,.T.); +#190342 = ORIENTED_EDGE('',*,*,#190204,.T.); +#190343 = ORIENTED_EDGE('',*,*,#190236,.T.); +#190344 = ORIENTED_EDGE('',*,*,#190268,.T.); +#190345 = ORIENTED_EDGE('',*,*,#190291,.T.); +#190346 = FACE_BOUND('',#190347,.T.); +#190347 = EDGE_LOOP('',(#190348)); +#190348 = ORIENTED_EDGE('',*,*,#190323,.T.); +#190349 = PLANE('',#190350); +#190350 = AXIS2_PLACEMENT_3D('',#190351,#190352,#190353); +#190351 = CARTESIAN_POINT('',(0.,0.,1.51)); +#190352 = DIRECTION('',(0.,0.,1.)); +#190353 = DIRECTION('',(1.,0.,-0.)); +#190354 = ADVANCED_FACE('',(#190355,#190366),#190369,.T.); +#190355 = FACE_BOUND('',#190356,.F.); +#190356 = EDGE_LOOP('',(#190357,#190358,#190359,#190360,#190361,#190362, + #190363,#190364,#190365)); +#190357 = ORIENTED_EDGE('',*,*,#190030,.T.); +#190358 = ORIENTED_EDGE('',*,*,#190061,.T.); +#190359 = ORIENTED_EDGE('',*,*,#190092,.T.); +#190360 = ORIENTED_EDGE('',*,*,#190125,.T.); +#190361 = ORIENTED_EDGE('',*,*,#190156,.T.); +#190362 = ORIENTED_EDGE('',*,*,#190187,.T.); +#190363 = ORIENTED_EDGE('',*,*,#190220,.T.); +#190364 = ORIENTED_EDGE('',*,*,#190251,.T.); +#190365 = ORIENTED_EDGE('',*,*,#190284,.T.); +#190366 = FACE_BOUND('',#190367,.F.); +#190367 = EDGE_LOOP('',(#190368)); +#190368 = ORIENTED_EDGE('',*,*,#190315,.T.); +#190369 = PLANE('',#190370); +#190370 = AXIS2_PLACEMENT_3D('',#190371,#190372,#190373); +#190371 = CARTESIAN_POINT('',(0.,0.,1.545)); +#190372 = DIRECTION('',(0.,0.,1.)); +#190373 = DIRECTION('',(1.,0.,-0.)); +#190374 = MANIFOLD_SOLID_BREP('',#190375); +#190375 = CLOSED_SHELL('',(#190376,#190418,#190449,#190480,#190511, + #190542,#190575,#190606,#190637,#190659,#190692,#190712)); +#190376 = ADVANCED_FACE('',(#190377),#190413,.T.); +#190377 = FACE_BOUND('',#190378,.T.); +#190378 = EDGE_LOOP('',(#190379,#190389,#190398,#190406)); +#190379 = ORIENTED_EDGE('',*,*,#190380,.T.); +#190380 = EDGE_CURVE('',#190381,#190383,#190385,.T.); +#190381 = VERTEX_POINT('',#190382); +#190382 = CARTESIAN_POINT('',(143.659443,-82.326853,1.51)); +#190383 = VERTEX_POINT('',#190384); +#190384 = CARTESIAN_POINT('',(143.659443,-82.326853,1.545)); +#190385 = LINE('',#190386,#190387); +#190386 = CARTESIAN_POINT('',(143.659443,-82.326853,1.51)); +#190387 = VECTOR('',#190388,1.); +#190388 = DIRECTION('',(0.,0.,1.)); +#190389 = ORIENTED_EDGE('',*,*,#190390,.T.); +#190390 = EDGE_CURVE('',#190383,#190391,#190393,.T.); +#190391 = VERTEX_POINT('',#190392); +#190392 = CARTESIAN_POINT('',(143.813079,-82.390491,1.545)); +#190393 = CIRCLE('',#190394,0.100000590676); +#190394 = AXIS2_PLACEMENT_3D('',#190395,#190396,#190397); +#190395 = CARTESIAN_POINT('',(143.715,-82.41000068719,1.545)); +#190396 = DIRECTION('',(0.,0.,-1.)); +#190397 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#190398 = ORIENTED_EDGE('',*,*,#190399,.F.); +#190399 = EDGE_CURVE('',#190400,#190391,#190402,.T.); +#190400 = VERTEX_POINT('',#190401); +#190401 = CARTESIAN_POINT('',(143.813079,-82.390491,1.51)); +#190402 = LINE('',#190403,#190404); +#190403 = CARTESIAN_POINT('',(143.813079,-82.390491,1.51)); +#190404 = VECTOR('',#190405,1.); +#190405 = DIRECTION('',(0.,0.,1.)); +#190406 = ORIENTED_EDGE('',*,*,#190407,.F.); +#190407 = EDGE_CURVE('',#190381,#190400,#190408,.T.); +#190408 = CIRCLE('',#190409,0.100000590676); +#190409 = AXIS2_PLACEMENT_3D('',#190410,#190411,#190412); +#190410 = CARTESIAN_POINT('',(143.715,-82.41000068719,1.51)); +#190411 = DIRECTION('',(0.,0.,-1.)); +#190412 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#190413 = CYLINDRICAL_SURFACE('',#190414,0.100000590676); +#190414 = AXIS2_PLACEMENT_3D('',#190415,#190416,#190417); +#190415 = CARTESIAN_POINT('',(143.715,-82.41000068719,1.51)); +#190416 = DIRECTION('',(0.,0.,-1.)); +#190417 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#190418 = ADVANCED_FACE('',(#190419),#190444,.T.); +#190419 = FACE_BOUND('',#190420,.T.); +#190420 = EDGE_LOOP('',(#190421,#190422,#190430,#190438)); +#190421 = ORIENTED_EDGE('',*,*,#190399,.T.); +#190422 = ORIENTED_EDGE('',*,*,#190423,.T.); +#190423 = EDGE_CURVE('',#190391,#190424,#190426,.T.); +#190424 = VERTEX_POINT('',#190425); +#190425 = CARTESIAN_POINT('',(143.813079,-84.304509,1.545)); +#190426 = LINE('',#190427,#190428); +#190427 = CARTESIAN_POINT('',(143.813079,-82.390491,1.545)); +#190428 = VECTOR('',#190429,1.); +#190429 = DIRECTION('',(0.,-1.,0.)); +#190430 = ORIENTED_EDGE('',*,*,#190431,.F.); +#190431 = EDGE_CURVE('',#190432,#190424,#190434,.T.); +#190432 = VERTEX_POINT('',#190433); +#190433 = CARTESIAN_POINT('',(143.813079,-84.304509,1.51)); +#190434 = LINE('',#190435,#190436); +#190435 = CARTESIAN_POINT('',(143.813079,-84.304509,1.51)); +#190436 = VECTOR('',#190437,1.); +#190437 = DIRECTION('',(0.,0.,1.)); +#190438 = ORIENTED_EDGE('',*,*,#190439,.F.); +#190439 = EDGE_CURVE('',#190400,#190432,#190440,.T.); +#190440 = LINE('',#190441,#190442); +#190441 = CARTESIAN_POINT('',(143.813079,-82.390491,1.51)); +#190442 = VECTOR('',#190443,1.); +#190443 = DIRECTION('',(0.,-1.,0.)); +#190444 = PLANE('',#190445); +#190445 = AXIS2_PLACEMENT_3D('',#190446,#190447,#190448); +#190446 = CARTESIAN_POINT('',(143.813079,-82.390491,1.51)); +#190447 = DIRECTION('',(1.,0.,-0.)); +#190448 = DIRECTION('',(0.,-1.,0.)); +#190449 = ADVANCED_FACE('',(#190450),#190475,.T.); +#190450 = FACE_BOUND('',#190451,.T.); +#190451 = EDGE_LOOP('',(#190452,#190453,#190461,#190469)); +#190452 = ORIENTED_EDGE('',*,*,#190431,.T.); +#190453 = ORIENTED_EDGE('',*,*,#190454,.T.); +#190454 = EDGE_CURVE('',#190424,#190455,#190457,.T.); +#190455 = VERTEX_POINT('',#190456); +#190456 = CARTESIAN_POINT('',(143.798147,-84.340557,1.545)); +#190457 = LINE('',#190458,#190459); +#190458 = CARTESIAN_POINT('',(143.813079,-84.304509,1.545)); +#190459 = VECTOR('',#190460,1.); +#190460 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190461 = ORIENTED_EDGE('',*,*,#190462,.F.); +#190462 = EDGE_CURVE('',#190463,#190455,#190465,.T.); +#190463 = VERTEX_POINT('',#190464); +#190464 = CARTESIAN_POINT('',(143.798147,-84.340557,1.51)); +#190465 = LINE('',#190466,#190467); +#190466 = CARTESIAN_POINT('',(143.798147,-84.340557,1.51)); +#190467 = VECTOR('',#190468,1.); +#190468 = DIRECTION('',(0.,0.,1.)); +#190469 = ORIENTED_EDGE('',*,*,#190470,.F.); +#190470 = EDGE_CURVE('',#190432,#190463,#190471,.T.); +#190471 = LINE('',#190472,#190473); +#190472 = CARTESIAN_POINT('',(143.813079,-84.304509,1.51)); +#190473 = VECTOR('',#190474,1.); +#190474 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190475 = PLANE('',#190476); +#190476 = AXIS2_PLACEMENT_3D('',#190477,#190478,#190479); +#190477 = CARTESIAN_POINT('',(143.813079,-84.304509,1.51)); +#190478 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#190479 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190480 = ADVANCED_FACE('',(#190481),#190506,.T.); +#190481 = FACE_BOUND('',#190482,.T.); +#190482 = EDGE_LOOP('',(#190483,#190484,#190492,#190500)); +#190483 = ORIENTED_EDGE('',*,*,#190462,.T.); +#190484 = ORIENTED_EDGE('',*,*,#190485,.T.); +#190485 = EDGE_CURVE('',#190455,#190486,#190488,.T.); +#190486 = VERTEX_POINT('',#190487); +#190487 = CARTESIAN_POINT('',(143.7695,-84.371921,1.545)); +#190488 = LINE('',#190489,#190490); +#190489 = CARTESIAN_POINT('',(143.798147,-84.340557,1.545)); +#190490 = VECTOR('',#190491,1.); +#190491 = DIRECTION('',(-0.674401648352,-0.738364690854,0.)); +#190492 = ORIENTED_EDGE('',*,*,#190493,.F.); +#190493 = EDGE_CURVE('',#190494,#190486,#190496,.T.); +#190494 = VERTEX_POINT('',#190495); +#190495 = CARTESIAN_POINT('',(143.7695,-84.371921,1.51)); +#190496 = LINE('',#190497,#190498); +#190497 = CARTESIAN_POINT('',(143.7695,-84.371921,1.51)); +#190498 = VECTOR('',#190499,1.); +#190499 = DIRECTION('',(0.,0.,1.)); +#190500 = ORIENTED_EDGE('',*,*,#190501,.F.); +#190501 = EDGE_CURVE('',#190463,#190494,#190502,.T.); +#190502 = LINE('',#190503,#190504); +#190503 = CARTESIAN_POINT('',(143.798147,-84.340557,1.51)); +#190504 = VECTOR('',#190505,1.); +#190505 = DIRECTION('',(-0.674401648352,-0.738364690854,0.)); +#190506 = PLANE('',#190507); +#190507 = AXIS2_PLACEMENT_3D('',#190508,#190509,#190510); +#190508 = CARTESIAN_POINT('',(143.798147,-84.340557,1.51)); +#190509 = DIRECTION('',(0.738364690854,-0.674401648352,0.)); +#190510 = DIRECTION('',(-0.674401648352,-0.738364690854,0.)); +#190511 = ADVANCED_FACE('',(#190512),#190537,.T.); +#190512 = FACE_BOUND('',#190513,.T.); +#190513 = EDGE_LOOP('',(#190514,#190515,#190523,#190531)); +#190514 = ORIENTED_EDGE('',*,*,#190493,.T.); +#190515 = ORIENTED_EDGE('',*,*,#190516,.T.); +#190516 = EDGE_CURVE('',#190486,#190517,#190519,.T.); +#190517 = VERTEX_POINT('',#190518); +#190518 = CARTESIAN_POINT('',(143.777164,-84.385195,1.545)); +#190519 = LINE('',#190520,#190521); +#190520 = CARTESIAN_POINT('',(143.7695,-84.371921,1.545)); +#190521 = VECTOR('',#190522,1.); +#190522 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#190523 = ORIENTED_EDGE('',*,*,#190524,.F.); +#190524 = EDGE_CURVE('',#190525,#190517,#190527,.T.); +#190525 = VERTEX_POINT('',#190526); +#190526 = CARTESIAN_POINT('',(143.777164,-84.385195,1.51)); +#190527 = LINE('',#190528,#190529); +#190528 = CARTESIAN_POINT('',(143.777164,-84.385195,1.51)); +#190529 = VECTOR('',#190530,1.); +#190530 = DIRECTION('',(0.,0.,1.)); +#190531 = ORIENTED_EDGE('',*,*,#190532,.F.); +#190532 = EDGE_CURVE('',#190494,#190525,#190533,.T.); +#190533 = LINE('',#190534,#190535); +#190534 = CARTESIAN_POINT('',(143.7695,-84.371921,1.51)); +#190535 = VECTOR('',#190536,1.); +#190536 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#190537 = PLANE('',#190538); +#190538 = AXIS2_PLACEMENT_3D('',#190539,#190540,#190541); +#190539 = CARTESIAN_POINT('',(143.7695,-84.371921,1.51)); +#190540 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#190541 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#190542 = ADVANCED_FACE('',(#190543),#190570,.T.); +#190543 = FACE_BOUND('',#190544,.T.); +#190544 = EDGE_LOOP('',(#190545,#190546,#190555,#190563)); +#190545 = ORIENTED_EDGE('',*,*,#190524,.T.); +#190546 = ORIENTED_EDGE('',*,*,#190547,.T.); +#190547 = EDGE_CURVE('',#190517,#190548,#190550,.T.); +#190548 = VERTEX_POINT('',#190549); +#190549 = CARTESIAN_POINT('',(143.615,-84.222948,1.545)); +#190550 = CIRCLE('',#190551,0.299990115857); +#190551 = AXIS2_PLACEMENT_3D('',#190552,#190553,#190554); +#190552 = CARTESIAN_POINT('',(143.50002323997,-84.50002996308,1.545)); +#190553 = DIRECTION('',(0.,0.,-1.)); +#190554 = DIRECTION('',(0.923832971062,0.382795822311,0.)); +#190555 = ORIENTED_EDGE('',*,*,#190556,.F.); +#190556 = EDGE_CURVE('',#190557,#190548,#190559,.T.); +#190557 = VERTEX_POINT('',#190558); +#190558 = CARTESIAN_POINT('',(143.615,-84.222948,1.51)); +#190559 = LINE('',#190560,#190561); +#190560 = CARTESIAN_POINT('',(143.615,-84.222948,1.51)); +#190561 = VECTOR('',#190562,1.); +#190562 = DIRECTION('',(0.,0.,1.)); +#190563 = ORIENTED_EDGE('',*,*,#190564,.F.); +#190564 = EDGE_CURVE('',#190525,#190557,#190565,.T.); +#190565 = CIRCLE('',#190566,0.299990115857); +#190566 = AXIS2_PLACEMENT_3D('',#190567,#190568,#190569); +#190567 = CARTESIAN_POINT('',(143.50002323997,-84.50002996308,1.51)); +#190568 = DIRECTION('',(0.,0.,-1.)); +#190569 = DIRECTION('',(0.923832971062,0.382795822311,0.)); +#190570 = CYLINDRICAL_SURFACE('',#190571,0.299990115857); +#190571 = AXIS2_PLACEMENT_3D('',#190572,#190573,#190574); +#190572 = CARTESIAN_POINT('',(143.50002323997,-84.50002996308,1.51)); +#190573 = DIRECTION('',(0.,0.,-1.)); +#190574 = DIRECTION('',(0.923832971062,0.382795822311,0.)); +#190575 = ADVANCED_FACE('',(#190576),#190601,.T.); +#190576 = FACE_BOUND('',#190577,.T.); +#190577 = EDGE_LOOP('',(#190578,#190579,#190587,#190595)); +#190578 = ORIENTED_EDGE('',*,*,#190556,.T.); +#190579 = ORIENTED_EDGE('',*,*,#190580,.T.); +#190580 = EDGE_CURVE('',#190548,#190581,#190583,.T.); +#190581 = VERTEX_POINT('',#190582); +#190582 = CARTESIAN_POINT('',(143.616921,-82.390491,1.545)); +#190583 = LINE('',#190584,#190585); +#190584 = CARTESIAN_POINT('',(143.615,-84.222948,1.545)); +#190585 = VECTOR('',#190586,1.); +#190586 = DIRECTION('',(1.048318702386E-03,0.999999450514,0.)); +#190587 = ORIENTED_EDGE('',*,*,#190588,.F.); +#190588 = EDGE_CURVE('',#190589,#190581,#190591,.T.); +#190589 = VERTEX_POINT('',#190590); +#190590 = CARTESIAN_POINT('',(143.616921,-82.390491,1.51)); +#190591 = LINE('',#190592,#190593); +#190592 = CARTESIAN_POINT('',(143.616921,-82.390491,1.51)); +#190593 = VECTOR('',#190594,1.); +#190594 = DIRECTION('',(0.,0.,1.)); +#190595 = ORIENTED_EDGE('',*,*,#190596,.F.); +#190596 = EDGE_CURVE('',#190557,#190589,#190597,.T.); +#190597 = LINE('',#190598,#190599); +#190598 = CARTESIAN_POINT('',(143.615,-84.222948,1.51)); +#190599 = VECTOR('',#190600,1.); +#190600 = DIRECTION('',(1.048318702386E-03,0.999999450514,0.)); +#190601 = PLANE('',#190602); +#190602 = AXIS2_PLACEMENT_3D('',#190603,#190604,#190605); +#190603 = CARTESIAN_POINT('',(143.615,-84.222948,1.51)); +#190604 = DIRECTION('',(-0.999999450514,1.048318702386E-03,0.)); +#190605 = DIRECTION('',(1.048318702386E-03,0.999999450514,0.)); +#190606 = ADVANCED_FACE('',(#190607),#190632,.T.); +#190607 = FACE_BOUND('',#190608,.T.); +#190608 = EDGE_LOOP('',(#190609,#190610,#190618,#190626)); +#190609 = ORIENTED_EDGE('',*,*,#190588,.T.); +#190610 = ORIENTED_EDGE('',*,*,#190611,.T.); +#190611 = EDGE_CURVE('',#190581,#190612,#190614,.T.); +#190612 = VERTEX_POINT('',#190613); +#190613 = CARTESIAN_POINT('',(143.631853,-82.354443,1.545)); +#190614 = LINE('',#190615,#190616); +#190615 = CARTESIAN_POINT('',(143.616921,-82.390491,1.545)); +#190616 = VECTOR('',#190617,1.); +#190617 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#190618 = ORIENTED_EDGE('',*,*,#190619,.F.); +#190619 = EDGE_CURVE('',#190620,#190612,#190622,.T.); +#190620 = VERTEX_POINT('',#190621); +#190621 = CARTESIAN_POINT('',(143.631853,-82.354443,1.51)); +#190622 = LINE('',#190623,#190624); +#190623 = CARTESIAN_POINT('',(143.631853,-82.354443,1.51)); +#190624 = VECTOR('',#190625,1.); +#190625 = DIRECTION('',(0.,0.,1.)); +#190626 = ORIENTED_EDGE('',*,*,#190627,.F.); +#190627 = EDGE_CURVE('',#190589,#190620,#190628,.T.); +#190628 = LINE('',#190629,#190630); +#190629 = CARTESIAN_POINT('',(143.616921,-82.390491,1.51)); +#190630 = VECTOR('',#190631,1.); +#190631 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#190632 = PLANE('',#190633); +#190633 = AXIS2_PLACEMENT_3D('',#190634,#190635,#190636); +#190634 = CARTESIAN_POINT('',(143.616921,-82.390491,1.51)); +#190635 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#190636 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#190637 = ADVANCED_FACE('',(#190638),#190654,.T.); +#190638 = FACE_BOUND('',#190639,.T.); +#190639 = EDGE_LOOP('',(#190640,#190641,#190647,#190648)); +#190640 = ORIENTED_EDGE('',*,*,#190619,.T.); +#190641 = ORIENTED_EDGE('',*,*,#190642,.T.); +#190642 = EDGE_CURVE('',#190612,#190383,#190643,.T.); +#190643 = LINE('',#190644,#190645); +#190644 = CARTESIAN_POINT('',(143.631853,-82.354443,1.545)); +#190645 = VECTOR('',#190646,1.); +#190646 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190647 = ORIENTED_EDGE('',*,*,#190380,.F.); +#190648 = ORIENTED_EDGE('',*,*,#190649,.F.); +#190649 = EDGE_CURVE('',#190620,#190381,#190650,.T.); +#190650 = LINE('',#190651,#190652); +#190651 = CARTESIAN_POINT('',(143.631853,-82.354443,1.51)); +#190652 = VECTOR('',#190653,1.); +#190653 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190654 = PLANE('',#190655); +#190655 = AXIS2_PLACEMENT_3D('',#190656,#190657,#190658); +#190656 = CARTESIAN_POINT('',(143.631853,-82.354443,1.51)); +#190657 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#190658 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190659 = ADVANCED_FACE('',(#190660),#190687,.F.); +#190660 = FACE_BOUND('',#190661,.T.); +#190661 = EDGE_LOOP('',(#190662,#190672,#190679,#190680)); +#190662 = ORIENTED_EDGE('',*,*,#190663,.T.); +#190663 = EDGE_CURVE('',#190664,#190666,#190668,.T.); +#190664 = VERTEX_POINT('',#190665); +#190665 = CARTESIAN_POINT('',(143.637255,-84.5,1.51)); +#190666 = VERTEX_POINT('',#190667); +#190667 = CARTESIAN_POINT('',(143.637255,-84.5,1.545)); +#190668 = LINE('',#190669,#190670); +#190669 = CARTESIAN_POINT('',(143.637255,-84.5,1.51)); +#190670 = VECTOR('',#190671,1.); +#190671 = DIRECTION('',(0.,0.,1.)); +#190672 = ORIENTED_EDGE('',*,*,#190673,.T.); +#190673 = EDGE_CURVE('',#190666,#190666,#190674,.T.); +#190674 = CIRCLE('',#190675,0.137255); +#190675 = AXIS2_PLACEMENT_3D('',#190676,#190677,#190678); +#190676 = CARTESIAN_POINT('',(143.5,-84.5,1.545)); +#190677 = DIRECTION('',(0.,0.,1.)); +#190678 = DIRECTION('',(1.,0.,-0.)); +#190679 = ORIENTED_EDGE('',*,*,#190663,.F.); +#190680 = ORIENTED_EDGE('',*,*,#190681,.F.); +#190681 = EDGE_CURVE('',#190664,#190664,#190682,.T.); +#190682 = CIRCLE('',#190683,0.137255); +#190683 = AXIS2_PLACEMENT_3D('',#190684,#190685,#190686); +#190684 = CARTESIAN_POINT('',(143.5,-84.5,1.51)); +#190685 = DIRECTION('',(0.,0.,1.)); +#190686 = DIRECTION('',(1.,0.,-0.)); +#190687 = CYLINDRICAL_SURFACE('',#190688,0.137255); +#190688 = AXIS2_PLACEMENT_3D('',#190689,#190690,#190691); +#190689 = CARTESIAN_POINT('',(143.5,-84.5,1.51)); +#190690 = DIRECTION('',(-0.,-0.,-1.)); +#190691 = DIRECTION('',(1.,0.,-0.)); +#190692 = ADVANCED_FACE('',(#190693,#190704),#190707,.F.); +#190693 = FACE_BOUND('',#190694,.T.); +#190694 = EDGE_LOOP('',(#190695,#190696,#190697,#190698,#190699,#190700, + #190701,#190702,#190703)); +#190695 = ORIENTED_EDGE('',*,*,#190407,.T.); +#190696 = ORIENTED_EDGE('',*,*,#190439,.T.); +#190697 = ORIENTED_EDGE('',*,*,#190470,.T.); +#190698 = ORIENTED_EDGE('',*,*,#190501,.T.); +#190699 = ORIENTED_EDGE('',*,*,#190532,.T.); +#190700 = ORIENTED_EDGE('',*,*,#190564,.T.); +#190701 = ORIENTED_EDGE('',*,*,#190596,.T.); +#190702 = ORIENTED_EDGE('',*,*,#190627,.T.); +#190703 = ORIENTED_EDGE('',*,*,#190649,.T.); +#190704 = FACE_BOUND('',#190705,.T.); +#190705 = EDGE_LOOP('',(#190706)); +#190706 = ORIENTED_EDGE('',*,*,#190681,.T.); +#190707 = PLANE('',#190708); +#190708 = AXIS2_PLACEMENT_3D('',#190709,#190710,#190711); +#190709 = CARTESIAN_POINT('',(0.,0.,1.51)); +#190710 = DIRECTION('',(0.,0.,1.)); +#190711 = DIRECTION('',(1.,0.,-0.)); +#190712 = ADVANCED_FACE('',(#190713,#190724),#190727,.T.); +#190713 = FACE_BOUND('',#190714,.F.); +#190714 = EDGE_LOOP('',(#190715,#190716,#190717,#190718,#190719,#190720, + #190721,#190722,#190723)); +#190715 = ORIENTED_EDGE('',*,*,#190390,.T.); +#190716 = ORIENTED_EDGE('',*,*,#190423,.T.); +#190717 = ORIENTED_EDGE('',*,*,#190454,.T.); +#190718 = ORIENTED_EDGE('',*,*,#190485,.T.); +#190719 = ORIENTED_EDGE('',*,*,#190516,.T.); +#190720 = ORIENTED_EDGE('',*,*,#190547,.T.); +#190721 = ORIENTED_EDGE('',*,*,#190580,.T.); +#190722 = ORIENTED_EDGE('',*,*,#190611,.T.); +#190723 = ORIENTED_EDGE('',*,*,#190642,.T.); +#190724 = FACE_BOUND('',#190725,.F.); +#190725 = EDGE_LOOP('',(#190726)); +#190726 = ORIENTED_EDGE('',*,*,#190673,.T.); +#190727 = PLANE('',#190728); +#190728 = AXIS2_PLACEMENT_3D('',#190729,#190730,#190731); +#190729 = CARTESIAN_POINT('',(0.,0.,1.545)); +#190730 = DIRECTION('',(0.,0.,1.)); +#190731 = DIRECTION('',(1.,0.,-0.)); +#190732 = MANIFOLD_SOLID_BREP('',#190733); +#190733 = CLOSED_SHELL('',(#190734,#190774,#190805,#190836,#190867, + #190900,#190931,#190962,#190993,#191024,#191057,#191079,#191112, + #191145,#191170)); +#190734 = ADVANCED_FACE('',(#190735),#190769,.F.); +#190735 = FACE_BOUND('',#190736,.F.); +#190736 = EDGE_LOOP('',(#190737,#190747,#190755,#190763)); +#190737 = ORIENTED_EDGE('',*,*,#190738,.T.); +#190738 = EDGE_CURVE('',#190739,#190741,#190743,.T.); +#190739 = VERTEX_POINT('',#190740); +#190740 = CARTESIAN_POINT('',(143.6,-84.78113,0.)); +#190741 = VERTEX_POINT('',#190742); +#190742 = CARTESIAN_POINT('',(143.6,-84.78113,-3.5E-02)); +#190743 = LINE('',#190744,#190745); +#190744 = CARTESIAN_POINT('',(143.6,-84.78113,0.)); +#190745 = VECTOR('',#190746,1.); +#190746 = DIRECTION('',(0.,0.,-1.)); +#190747 = ORIENTED_EDGE('',*,*,#190748,.T.); +#190748 = EDGE_CURVE('',#190741,#190749,#190751,.T.); +#190749 = VERTEX_POINT('',#190750); +#190750 = CARTESIAN_POINT('',(143.598079,-85.761871,-3.5E-02)); +#190751 = LINE('',#190752,#190753); +#190752 = CARTESIAN_POINT('',(143.6,-84.78113,-3.5E-02)); +#190753 = VECTOR('',#190754,1.); +#190754 = DIRECTION('',(-1.958719289743E-03,-0.999998081708,0.)); +#190755 = ORIENTED_EDGE('',*,*,#190756,.F.); +#190756 = EDGE_CURVE('',#190757,#190749,#190759,.T.); +#190757 = VERTEX_POINT('',#190758); +#190758 = CARTESIAN_POINT('',(143.598079,-85.761871,0.)); +#190759 = LINE('',#190760,#190761); +#190760 = CARTESIAN_POINT('',(143.598079,-85.761871,0.)); +#190761 = VECTOR('',#190762,1.); +#190762 = DIRECTION('',(0.,0.,-1.)); +#190763 = ORIENTED_EDGE('',*,*,#190764,.F.); +#190764 = EDGE_CURVE('',#190739,#190757,#190765,.T.); +#190765 = LINE('',#190766,#190767); +#190766 = CARTESIAN_POINT('',(143.6,-84.78113,0.)); +#190767 = VECTOR('',#190768,1.); +#190768 = DIRECTION('',(-1.958719289743E-03,-0.999998081708,0.)); +#190769 = PLANE('',#190770); +#190770 = AXIS2_PLACEMENT_3D('',#190771,#190772,#190773); +#190771 = CARTESIAN_POINT('',(143.6,-84.78113,0.)); +#190772 = DIRECTION('',(-0.999998081708,1.958719289743E-03,0.)); +#190773 = DIRECTION('',(-1.958719289743E-03,-0.999998081708,0.)); +#190774 = ADVANCED_FACE('',(#190775),#190800,.F.); +#190775 = FACE_BOUND('',#190776,.F.); +#190776 = EDGE_LOOP('',(#190777,#190778,#190786,#190794)); +#190777 = ORIENTED_EDGE('',*,*,#190756,.T.); +#190778 = ORIENTED_EDGE('',*,*,#190779,.T.); +#190779 = EDGE_CURVE('',#190749,#190780,#190782,.T.); +#190780 = VERTEX_POINT('',#190781); +#190781 = CARTESIAN_POINT('',(143.583147,-85.797919,-3.5E-02)); +#190782 = LINE('',#190783,#190784); +#190783 = CARTESIAN_POINT('',(143.598079,-85.761871,-3.5E-02)); +#190784 = VECTOR('',#190785,1.); +#190785 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190786 = ORIENTED_EDGE('',*,*,#190787,.F.); +#190787 = EDGE_CURVE('',#190788,#190780,#190790,.T.); +#190788 = VERTEX_POINT('',#190789); +#190789 = CARTESIAN_POINT('',(143.583147,-85.797919,0.)); +#190790 = LINE('',#190791,#190792); +#190791 = CARTESIAN_POINT('',(143.583147,-85.797919,0.)); +#190792 = VECTOR('',#190793,1.); +#190793 = DIRECTION('',(0.,0.,-1.)); +#190794 = ORIENTED_EDGE('',*,*,#190795,.F.); +#190795 = EDGE_CURVE('',#190757,#190788,#190796,.T.); +#190796 = LINE('',#190797,#190798); +#190797 = CARTESIAN_POINT('',(143.598079,-85.761871,0.)); +#190798 = VECTOR('',#190799,1.); +#190799 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190800 = PLANE('',#190801); +#190801 = AXIS2_PLACEMENT_3D('',#190802,#190803,#190804); +#190802 = CARTESIAN_POINT('',(143.598079,-85.761871,0.)); +#190803 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#190804 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#190805 = ADVANCED_FACE('',(#190806),#190831,.F.); +#190806 = FACE_BOUND('',#190807,.F.); +#190807 = EDGE_LOOP('',(#190808,#190809,#190817,#190825)); +#190808 = ORIENTED_EDGE('',*,*,#190787,.T.); +#190809 = ORIENTED_EDGE('',*,*,#190810,.T.); +#190810 = EDGE_CURVE('',#190780,#190811,#190813,.T.); +#190811 = VERTEX_POINT('',#190812); +#190812 = CARTESIAN_POINT('',(136.085922,-93.297862,-3.5E-02)); +#190813 = LINE('',#190814,#190815); +#190814 = CARTESIAN_POINT('',(143.583147,-85.797919,-3.5E-02)); +#190815 = VECTOR('',#190816,1.); +#190816 = DIRECTION('',(-0.706978617632,-0.707234921516,0.)); +#190817 = ORIENTED_EDGE('',*,*,#190818,.F.); +#190818 = EDGE_CURVE('',#190819,#190811,#190821,.T.); +#190819 = VERTEX_POINT('',#190820); +#190820 = CARTESIAN_POINT('',(136.085922,-93.297862,0.)); +#190821 = LINE('',#190822,#190823); +#190822 = CARTESIAN_POINT('',(136.085922,-93.297862,0.)); +#190823 = VECTOR('',#190824,1.); +#190824 = DIRECTION('',(0.,0.,-1.)); +#190825 = ORIENTED_EDGE('',*,*,#190826,.F.); +#190826 = EDGE_CURVE('',#190788,#190819,#190827,.T.); +#190827 = LINE('',#190828,#190829); +#190828 = CARTESIAN_POINT('',(143.583147,-85.797919,0.)); +#190829 = VECTOR('',#190830,1.); +#190830 = DIRECTION('',(-0.706978617632,-0.707234921516,0.)); +#190831 = PLANE('',#190832); +#190832 = AXIS2_PLACEMENT_3D('',#190833,#190834,#190835); +#190833 = CARTESIAN_POINT('',(143.583147,-85.797919,0.)); +#190834 = DIRECTION('',(-0.707234921516,0.706978617632,0.)); +#190835 = DIRECTION('',(-0.706978617632,-0.707234921516,0.)); +#190836 = ADVANCED_FACE('',(#190837),#190862,.F.); +#190837 = FACE_BOUND('',#190838,.F.); +#190838 = EDGE_LOOP('',(#190839,#190840,#190848,#190856)); +#190839 = ORIENTED_EDGE('',*,*,#190818,.T.); +#190840 = ORIENTED_EDGE('',*,*,#190841,.T.); +#190841 = EDGE_CURVE('',#190811,#190842,#190844,.T.); +#190842 = VERTEX_POINT('',#190843); +#190843 = CARTESIAN_POINT('',(136.093586,-93.311136,-3.5E-02)); +#190844 = LINE('',#190845,#190846); +#190845 = CARTESIAN_POINT('',(136.085922,-93.297862,-3.5E-02)); +#190846 = VECTOR('',#190847,1.); +#190847 = DIRECTION('',(0.500012356404,-0.866018269694,0.)); +#190848 = ORIENTED_EDGE('',*,*,#190849,.F.); +#190849 = EDGE_CURVE('',#190850,#190842,#190852,.T.); +#190850 = VERTEX_POINT('',#190851); +#190851 = CARTESIAN_POINT('',(136.093586,-93.311136,0.)); +#190852 = LINE('',#190853,#190854); +#190853 = CARTESIAN_POINT('',(136.093586,-93.311136,0.)); +#190854 = VECTOR('',#190855,1.); +#190855 = DIRECTION('',(0.,0.,-1.)); +#190856 = ORIENTED_EDGE('',*,*,#190857,.F.); +#190857 = EDGE_CURVE('',#190819,#190850,#190858,.T.); +#190858 = LINE('',#190859,#190860); +#190859 = CARTESIAN_POINT('',(136.085922,-93.297862,0.)); +#190860 = VECTOR('',#190861,1.); +#190861 = DIRECTION('',(0.500012356404,-0.866018269694,0.)); +#190862 = PLANE('',#190863); +#190863 = AXIS2_PLACEMENT_3D('',#190864,#190865,#190866); +#190864 = CARTESIAN_POINT('',(136.085922,-93.297862,0.)); +#190865 = DIRECTION('',(-0.866018269694,-0.500012356404,-0.)); +#190866 = DIRECTION('',(0.500012356404,-0.866018269694,0.)); +#190867 = ADVANCED_FACE('',(#190868),#190895,.T.); +#190868 = FACE_BOUND('',#190869,.F.); +#190869 = EDGE_LOOP('',(#190870,#190871,#190880,#190888)); +#190870 = ORIENTED_EDGE('',*,*,#190849,.T.); +#190871 = ORIENTED_EDGE('',*,*,#190872,.T.); +#190872 = EDGE_CURVE('',#190842,#190873,#190875,.T.); +#190873 = VERTEX_POINT('',#190874); +#190874 = CARTESIAN_POINT('',(135.931227,-93.148777,-3.5E-02)); +#190875 = CIRCLE('',#190876,0.299999934501); +#190876 = AXIS2_PLACEMENT_3D('',#190877,#190878,#190879); +#190877 = CARTESIAN_POINT('',(135.81642214059,-93.4259408594,-3.5E-02)); +#190878 = DIRECTION('',(0.,0.,-1.)); +#190879 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#190880 = ORIENTED_EDGE('',*,*,#190881,.F.); +#190881 = EDGE_CURVE('',#190882,#190873,#190884,.T.); +#190882 = VERTEX_POINT('',#190883); +#190883 = CARTESIAN_POINT('',(135.931227,-93.148777,0.)); +#190884 = LINE('',#190885,#190886); +#190885 = CARTESIAN_POINT('',(135.931227,-93.148777,0.)); +#190886 = VECTOR('',#190887,1.); +#190887 = DIRECTION('',(0.,0.,-1.)); +#190888 = ORIENTED_EDGE('',*,*,#190889,.F.); +#190889 = EDGE_CURVE('',#190850,#190882,#190890,.T.); +#190890 = CIRCLE('',#190891,0.299999934501); +#190891 = AXIS2_PLACEMENT_3D('',#190892,#190893,#190894); +#190892 = CARTESIAN_POINT('',(135.81642214059,-93.4259408594,0.)); +#190893 = DIRECTION('',(0.,0.,-1.)); +#190894 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#190895 = CYLINDRICAL_SURFACE('',#190896,0.299999934501); +#190896 = AXIS2_PLACEMENT_3D('',#190897,#190898,#190899); +#190897 = CARTESIAN_POINT('',(135.81642214059,-93.4259408594,0.)); +#190898 = DIRECTION('',(-0.,-0.,1.)); +#190899 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#190900 = ADVANCED_FACE('',(#190901),#190926,.F.); +#190901 = FACE_BOUND('',#190902,.F.); +#190902 = EDGE_LOOP('',(#190903,#190904,#190912,#190920)); +#190903 = ORIENTED_EDGE('',*,*,#190881,.T.); +#190904 = ORIENTED_EDGE('',*,*,#190905,.T.); +#190905 = EDGE_CURVE('',#190873,#190906,#190908,.T.); +#190906 = VERTEX_POINT('',#190907); +#190907 = CARTESIAN_POINT('',(135.9445,-93.15644,-3.5E-02)); +#190908 = LINE('',#190909,#190910); +#190909 = CARTESIAN_POINT('',(135.931227,-93.148777,-3.5E-02)); +#190910 = VECTOR('',#190911,1.); +#190911 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#190912 = ORIENTED_EDGE('',*,*,#190913,.F.); +#190913 = EDGE_CURVE('',#190914,#190906,#190916,.T.); +#190914 = VERTEX_POINT('',#190915); +#190915 = CARTESIAN_POINT('',(135.9445,-93.15644,0.)); +#190916 = LINE('',#190917,#190918); +#190917 = CARTESIAN_POINT('',(135.9445,-93.15644,0.)); +#190918 = VECTOR('',#190919,1.); +#190919 = DIRECTION('',(0.,0.,-1.)); +#190920 = ORIENTED_EDGE('',*,*,#190921,.F.); +#190921 = EDGE_CURVE('',#190882,#190914,#190922,.T.); +#190922 = LINE('',#190923,#190924); +#190923 = CARTESIAN_POINT('',(135.931227,-93.148777,0.)); +#190924 = VECTOR('',#190925,1.); +#190925 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#190926 = PLANE('',#190927); +#190927 = AXIS2_PLACEMENT_3D('',#190928,#190929,#190930); +#190928 = CARTESIAN_POINT('',(135.931227,-93.148777,0.)); +#190929 = DIRECTION('',(-0.499991674903,-0.866030210228,-0.)); +#190930 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#190931 = ADVANCED_FACE('',(#190932),#190957,.F.); +#190932 = FACE_BOUND('',#190933,.F.); +#190933 = EDGE_LOOP('',(#190934,#190935,#190943,#190951)); +#190934 = ORIENTED_EDGE('',*,*,#190913,.T.); +#190935 = ORIENTED_EDGE('',*,*,#190936,.T.); +#190936 = EDGE_CURVE('',#190906,#190937,#190939,.T.); +#190937 = VERTEX_POINT('',#190938); +#190938 = CARTESIAN_POINT('',(143.4,-85.70094,-3.5E-02)); +#190939 = LINE('',#190940,#190941); +#190940 = CARTESIAN_POINT('',(135.9445,-93.15644,-3.5E-02)); +#190941 = VECTOR('',#190942,1.); +#190942 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190943 = ORIENTED_EDGE('',*,*,#190944,.F.); +#190944 = EDGE_CURVE('',#190945,#190937,#190947,.T.); +#190945 = VERTEX_POINT('',#190946); +#190946 = CARTESIAN_POINT('',(143.4,-85.70094,0.)); +#190947 = LINE('',#190948,#190949); +#190948 = CARTESIAN_POINT('',(143.4,-85.70094,0.)); +#190949 = VECTOR('',#190950,1.); +#190950 = DIRECTION('',(0.,0.,-1.)); +#190951 = ORIENTED_EDGE('',*,*,#190952,.F.); +#190952 = EDGE_CURVE('',#190914,#190945,#190953,.T.); +#190953 = LINE('',#190954,#190955); +#190954 = CARTESIAN_POINT('',(135.9445,-93.15644,0.)); +#190955 = VECTOR('',#190956,1.); +#190956 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190957 = PLANE('',#190958); +#190958 = AXIS2_PLACEMENT_3D('',#190959,#190960,#190961); +#190959 = CARTESIAN_POINT('',(135.9445,-93.15644,0.)); +#190960 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#190961 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#190962 = ADVANCED_FACE('',(#190963),#190988,.F.); +#190963 = FACE_BOUND('',#190964,.F.); +#190964 = EDGE_LOOP('',(#190965,#190966,#190974,#190982)); +#190965 = ORIENTED_EDGE('',*,*,#190944,.T.); +#190966 = ORIENTED_EDGE('',*,*,#190967,.T.); +#190967 = EDGE_CURVE('',#190937,#190968,#190970,.T.); +#190968 = VERTEX_POINT('',#190969); +#190969 = CARTESIAN_POINT('',(143.4,-84.78113,-3.5E-02)); +#190970 = LINE('',#190971,#190972); +#190971 = CARTESIAN_POINT('',(143.4,-85.70094,-3.5E-02)); +#190972 = VECTOR('',#190973,1.); +#190973 = DIRECTION('',(0.,1.,0.)); +#190974 = ORIENTED_EDGE('',*,*,#190975,.F.); +#190975 = EDGE_CURVE('',#190976,#190968,#190978,.T.); +#190976 = VERTEX_POINT('',#190977); +#190977 = CARTESIAN_POINT('',(143.4,-84.78113,0.)); +#190978 = LINE('',#190979,#190980); +#190979 = CARTESIAN_POINT('',(143.4,-84.78113,0.)); +#190980 = VECTOR('',#190981,1.); +#190981 = DIRECTION('',(0.,0.,-1.)); +#190982 = ORIENTED_EDGE('',*,*,#190983,.F.); +#190983 = EDGE_CURVE('',#190945,#190976,#190984,.T.); +#190984 = LINE('',#190985,#190986); +#190985 = CARTESIAN_POINT('',(143.4,-85.70094,0.)); +#190986 = VECTOR('',#190987,1.); +#190987 = DIRECTION('',(0.,1.,0.)); +#190988 = PLANE('',#190989); +#190989 = AXIS2_PLACEMENT_3D('',#190990,#190991,#190992); +#190990 = CARTESIAN_POINT('',(143.4,-85.70094,0.)); +#190991 = DIRECTION('',(1.,-0.,0.)); +#190992 = DIRECTION('',(0.,1.,0.)); +#190993 = ADVANCED_FACE('',(#190994),#191019,.F.); +#190994 = FACE_BOUND('',#190995,.F.); +#190995 = EDGE_LOOP('',(#190996,#190997,#191005,#191013)); +#190996 = ORIENTED_EDGE('',*,*,#190975,.T.); +#190997 = ORIENTED_EDGE('',*,*,#190998,.T.); +#190998 = EDGE_CURVE('',#190968,#190999,#191001,.T.); +#190999 = VERTEX_POINT('',#191000); +#191000 = CARTESIAN_POINT('',(143.385195,-84.777164,-3.5E-02)); +#191001 = LINE('',#191002,#191003); +#191002 = CARTESIAN_POINT('',(143.4,-84.78113,-3.5E-02)); +#191003 = VECTOR('',#191004,1.); +#191004 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#191005 = ORIENTED_EDGE('',*,*,#191006,.F.); +#191006 = EDGE_CURVE('',#191007,#190999,#191009,.T.); +#191007 = VERTEX_POINT('',#191008); +#191008 = CARTESIAN_POINT('',(143.385195,-84.777164,0.)); +#191009 = LINE('',#191010,#191011); +#191010 = CARTESIAN_POINT('',(143.385195,-84.777164,0.)); +#191011 = VECTOR('',#191012,1.); +#191012 = DIRECTION('',(0.,0.,-1.)); +#191013 = ORIENTED_EDGE('',*,*,#191014,.F.); +#191014 = EDGE_CURVE('',#190976,#191007,#191015,.T.); +#191015 = LINE('',#191016,#191017); +#191016 = CARTESIAN_POINT('',(143.4,-84.78113,0.)); +#191017 = VECTOR('',#191018,1.); +#191018 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#191019 = PLANE('',#191020); +#191020 = AXIS2_PLACEMENT_3D('',#191021,#191022,#191023); +#191021 = CARTESIAN_POINT('',(143.4,-84.78113,0.)); +#191022 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#191023 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#191024 = ADVANCED_FACE('',(#191025),#191052,.T.); +#191025 = FACE_BOUND('',#191026,.F.); +#191026 = EDGE_LOOP('',(#191027,#191028,#191037,#191045)); +#191027 = ORIENTED_EDGE('',*,*,#191006,.T.); +#191028 = ORIENTED_EDGE('',*,*,#191029,.T.); +#191029 = EDGE_CURVE('',#190999,#191030,#191032,.T.); +#191030 = VERTEX_POINT('',#191031); +#191031 = CARTESIAN_POINT('',(143.614805,-84.777164,-3.5E-02)); +#191032 = CIRCLE('',#191033,0.299999472923); +#191033 = AXIS2_PLACEMENT_3D('',#191034,#191035,#191036); +#191034 = CARTESIAN_POINT('',(143.5,-84.50000069844,-3.5E-02)); +#191035 = DIRECTION('',(0.,0.,-1.)); +#191036 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#191037 = ORIENTED_EDGE('',*,*,#191038,.F.); +#191038 = EDGE_CURVE('',#191039,#191030,#191041,.T.); +#191039 = VERTEX_POINT('',#191040); +#191040 = CARTESIAN_POINT('',(143.614805,-84.777164,0.)); +#191041 = LINE('',#191042,#191043); +#191042 = CARTESIAN_POINT('',(143.614805,-84.777164,0.)); +#191043 = VECTOR('',#191044,1.); +#191044 = DIRECTION('',(0.,0.,-1.)); +#191045 = ORIENTED_EDGE('',*,*,#191046,.F.); +#191046 = EDGE_CURVE('',#191007,#191039,#191047,.T.); +#191047 = CIRCLE('',#191048,0.299999472923); +#191048 = AXIS2_PLACEMENT_3D('',#191049,#191050,#191051); +#191049 = CARTESIAN_POINT('',(143.5,-84.50000069844,0.)); +#191050 = DIRECTION('',(0.,0.,-1.)); +#191051 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#191052 = CYLINDRICAL_SURFACE('',#191053,0.299999472923); +#191053 = AXIS2_PLACEMENT_3D('',#191054,#191055,#191056); +#191054 = CARTESIAN_POINT('',(143.5,-84.50000069844,0.)); +#191055 = DIRECTION('',(-0.,-0.,1.)); +#191056 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#191057 = ADVANCED_FACE('',(#191058),#191074,.F.); +#191058 = FACE_BOUND('',#191059,.F.); +#191059 = EDGE_LOOP('',(#191060,#191061,#191067,#191068)); +#191060 = ORIENTED_EDGE('',*,*,#191038,.T.); +#191061 = ORIENTED_EDGE('',*,*,#191062,.T.); +#191062 = EDGE_CURVE('',#191030,#190741,#191063,.T.); +#191063 = LINE('',#191064,#191065); +#191064 = CARTESIAN_POINT('',(143.614805,-84.777164,-3.5E-02)); +#191065 = VECTOR('',#191066,1.); +#191066 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#191067 = ORIENTED_EDGE('',*,*,#190738,.F.); +#191068 = ORIENTED_EDGE('',*,*,#191069,.F.); +#191069 = EDGE_CURVE('',#191039,#190739,#191070,.T.); +#191070 = LINE('',#191071,#191072); +#191071 = CARTESIAN_POINT('',(143.614805,-84.777164,0.)); +#191072 = VECTOR('',#191073,1.); +#191073 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#191074 = PLANE('',#191075); +#191075 = AXIS2_PLACEMENT_3D('',#191076,#191077,#191078); +#191076 = CARTESIAN_POINT('',(143.614805,-84.777164,0.)); +#191077 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#191078 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#191079 = ADVANCED_FACE('',(#191080),#191107,.F.); +#191080 = FACE_BOUND('',#191081,.F.); +#191081 = EDGE_LOOP('',(#191082,#191092,#191099,#191100)); +#191082 = ORIENTED_EDGE('',*,*,#191083,.T.); +#191083 = EDGE_CURVE('',#191084,#191086,#191088,.T.); +#191084 = VERTEX_POINT('',#191085); +#191085 = CARTESIAN_POINT('',(135.953677,-93.425941,0.)); +#191086 = VERTEX_POINT('',#191087); +#191087 = CARTESIAN_POINT('',(135.953677,-93.425941,-3.5E-02)); +#191088 = LINE('',#191089,#191090); +#191089 = CARTESIAN_POINT('',(135.953677,-93.425941,0.)); +#191090 = VECTOR('',#191091,1.); +#191091 = DIRECTION('',(0.,0.,-1.)); +#191092 = ORIENTED_EDGE('',*,*,#191093,.T.); +#191093 = EDGE_CURVE('',#191086,#191086,#191094,.T.); +#191094 = CIRCLE('',#191095,0.137255); +#191095 = AXIS2_PLACEMENT_3D('',#191096,#191097,#191098); +#191096 = CARTESIAN_POINT('',(135.816422,-93.425941,-3.5E-02)); +#191097 = DIRECTION('',(0.,0.,1.)); +#191098 = DIRECTION('',(1.,0.,-0.)); +#191099 = ORIENTED_EDGE('',*,*,#191083,.F.); +#191100 = ORIENTED_EDGE('',*,*,#191101,.F.); +#191101 = EDGE_CURVE('',#191084,#191084,#191102,.T.); +#191102 = CIRCLE('',#191103,0.137255); +#191103 = AXIS2_PLACEMENT_3D('',#191104,#191105,#191106); +#191104 = CARTESIAN_POINT('',(135.816422,-93.425941,0.)); +#191105 = DIRECTION('',(0.,0.,1.)); +#191106 = DIRECTION('',(1.,0.,-0.)); +#191107 = CYLINDRICAL_SURFACE('',#191108,0.137255); +#191108 = AXIS2_PLACEMENT_3D('',#191109,#191110,#191111); +#191109 = CARTESIAN_POINT('',(135.816422,-93.425941,0.)); +#191110 = DIRECTION('',(0.,0.,1.)); +#191111 = DIRECTION('',(1.,0.,-0.)); +#191112 = ADVANCED_FACE('',(#191113),#191140,.F.); +#191113 = FACE_BOUND('',#191114,.F.); +#191114 = EDGE_LOOP('',(#191115,#191125,#191132,#191133)); +#191115 = ORIENTED_EDGE('',*,*,#191116,.T.); +#191116 = EDGE_CURVE('',#191117,#191119,#191121,.T.); +#191117 = VERTEX_POINT('',#191118); +#191118 = CARTESIAN_POINT('',(143.637255,-84.5,0.)); +#191119 = VERTEX_POINT('',#191120); +#191120 = CARTESIAN_POINT('',(143.637255,-84.5,-3.5E-02)); +#191121 = LINE('',#191122,#191123); +#191122 = CARTESIAN_POINT('',(143.637255,-84.5,0.)); +#191123 = VECTOR('',#191124,1.); +#191124 = DIRECTION('',(0.,0.,-1.)); +#191125 = ORIENTED_EDGE('',*,*,#191126,.T.); +#191126 = EDGE_CURVE('',#191119,#191119,#191127,.T.); +#191127 = CIRCLE('',#191128,0.137255); +#191128 = AXIS2_PLACEMENT_3D('',#191129,#191130,#191131); +#191129 = CARTESIAN_POINT('',(143.5,-84.5,-3.5E-02)); +#191130 = DIRECTION('',(0.,0.,1.)); +#191131 = DIRECTION('',(1.,0.,-0.)); +#191132 = ORIENTED_EDGE('',*,*,#191116,.F.); +#191133 = ORIENTED_EDGE('',*,*,#191134,.F.); +#191134 = EDGE_CURVE('',#191117,#191117,#191135,.T.); +#191135 = CIRCLE('',#191136,0.137255); +#191136 = AXIS2_PLACEMENT_3D('',#191137,#191138,#191139); +#191137 = CARTESIAN_POINT('',(143.5,-84.5,0.)); +#191138 = DIRECTION('',(0.,0.,1.)); +#191139 = DIRECTION('',(1.,0.,-0.)); +#191140 = CYLINDRICAL_SURFACE('',#191141,0.137255); +#191141 = AXIS2_PLACEMENT_3D('',#191142,#191143,#191144); +#191142 = CARTESIAN_POINT('',(143.5,-84.5,0.)); +#191143 = DIRECTION('',(0.,0.,1.)); +#191144 = DIRECTION('',(1.,0.,-0.)); +#191145 = ADVANCED_FACE('',(#191146,#191159,#191162),#191165,.F.); +#191146 = FACE_BOUND('',#191147,.F.); +#191147 = EDGE_LOOP('',(#191148,#191149,#191150,#191151,#191152,#191153, + #191154,#191155,#191156,#191157,#191158)); +#191148 = ORIENTED_EDGE('',*,*,#190764,.T.); +#191149 = ORIENTED_EDGE('',*,*,#190795,.T.); +#191150 = ORIENTED_EDGE('',*,*,#190826,.T.); +#191151 = ORIENTED_EDGE('',*,*,#190857,.T.); +#191152 = ORIENTED_EDGE('',*,*,#190889,.T.); +#191153 = ORIENTED_EDGE('',*,*,#190921,.T.); +#191154 = ORIENTED_EDGE('',*,*,#190952,.T.); +#191155 = ORIENTED_EDGE('',*,*,#190983,.T.); +#191156 = ORIENTED_EDGE('',*,*,#191014,.T.); +#191157 = ORIENTED_EDGE('',*,*,#191046,.T.); +#191158 = ORIENTED_EDGE('',*,*,#191069,.T.); +#191159 = FACE_BOUND('',#191160,.F.); +#191160 = EDGE_LOOP('',(#191161)); +#191161 = ORIENTED_EDGE('',*,*,#191101,.T.); +#191162 = FACE_BOUND('',#191163,.F.); +#191163 = EDGE_LOOP('',(#191164)); +#191164 = ORIENTED_EDGE('',*,*,#191134,.T.); +#191165 = PLANE('',#191166); +#191166 = AXIS2_PLACEMENT_3D('',#191167,#191168,#191169); +#191167 = CARTESIAN_POINT('',(0.,0.,0.)); +#191168 = DIRECTION('',(-0.,-0.,-1.)); +#191169 = DIRECTION('',(-1.,0.,0.)); +#191170 = ADVANCED_FACE('',(#191171,#191184,#191187),#191190,.T.); +#191171 = FACE_BOUND('',#191172,.T.); +#191172 = EDGE_LOOP('',(#191173,#191174,#191175,#191176,#191177,#191178, + #191179,#191180,#191181,#191182,#191183)); +#191173 = ORIENTED_EDGE('',*,*,#190748,.T.); +#191174 = ORIENTED_EDGE('',*,*,#190779,.T.); +#191175 = ORIENTED_EDGE('',*,*,#190810,.T.); +#191176 = ORIENTED_EDGE('',*,*,#190841,.T.); +#191177 = ORIENTED_EDGE('',*,*,#190872,.T.); +#191178 = ORIENTED_EDGE('',*,*,#190905,.T.); +#191179 = ORIENTED_EDGE('',*,*,#190936,.T.); +#191180 = ORIENTED_EDGE('',*,*,#190967,.T.); +#191181 = ORIENTED_EDGE('',*,*,#190998,.T.); +#191182 = ORIENTED_EDGE('',*,*,#191029,.T.); +#191183 = ORIENTED_EDGE('',*,*,#191062,.T.); +#191184 = FACE_BOUND('',#191185,.T.); +#191185 = EDGE_LOOP('',(#191186)); +#191186 = ORIENTED_EDGE('',*,*,#191093,.T.); +#191187 = FACE_BOUND('',#191188,.T.); +#191188 = EDGE_LOOP('',(#191189)); +#191189 = ORIENTED_EDGE('',*,*,#191126,.T.); +#191190 = PLANE('',#191191); +#191191 = AXIS2_PLACEMENT_3D('',#191192,#191193,#191194); +#191192 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#191193 = DIRECTION('',(-0.,-0.,-1.)); +#191194 = DIRECTION('',(-1.,0.,0.)); +#191195 = MANIFOLD_SOLID_BREP('',#191196); +#191196 = CLOSED_SHELL('',(#191197,#191237,#191268,#191301,#191332, + #191363,#191394,#191425,#191458,#191480,#191513,#191533)); +#191197 = ADVANCED_FACE('',(#191198),#191232,.T.); +#191198 = FACE_BOUND('',#191199,.T.); +#191199 = EDGE_LOOP('',(#191200,#191210,#191218,#191226)); +#191200 = ORIENTED_EDGE('',*,*,#191201,.T.); +#191201 = EDGE_CURVE('',#191202,#191204,#191206,.T.); +#191202 = VERTEX_POINT('',#191203); +#191203 = CARTESIAN_POINT('',(144.871921,-109.7695,1.51)); +#191204 = VERTEX_POINT('',#191205); +#191205 = CARTESIAN_POINT('',(144.871921,-109.7695,1.545)); +#191206 = LINE('',#191207,#191208); +#191207 = CARTESIAN_POINT('',(144.871921,-109.7695,1.51)); +#191208 = VECTOR('',#191209,1.); +#191209 = DIRECTION('',(0.,0.,1.)); +#191210 = ORIENTED_EDGE('',*,*,#191211,.T.); +#191211 = EDGE_CURVE('',#191204,#191212,#191214,.T.); +#191212 = VERTEX_POINT('',#191213); +#191213 = CARTESIAN_POINT('',(144.85,-109.791421,1.545)); +#191214 = LINE('',#191215,#191216); +#191215 = CARTESIAN_POINT('',(144.871921,-109.7695,1.545)); +#191216 = VECTOR('',#191217,1.); +#191217 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#191218 = ORIENTED_EDGE('',*,*,#191219,.F.); +#191219 = EDGE_CURVE('',#191220,#191212,#191222,.T.); +#191220 = VERTEX_POINT('',#191221); +#191221 = CARTESIAN_POINT('',(144.85,-109.791421,1.51)); +#191222 = LINE('',#191223,#191224); +#191223 = CARTESIAN_POINT('',(144.85,-109.791421,1.51)); +#191224 = VECTOR('',#191225,1.); +#191225 = DIRECTION('',(0.,0.,1.)); +#191226 = ORIENTED_EDGE('',*,*,#191227,.F.); +#191227 = EDGE_CURVE('',#191202,#191220,#191228,.T.); +#191228 = LINE('',#191229,#191230); +#191229 = CARTESIAN_POINT('',(144.871921,-109.7695,1.51)); +#191230 = VECTOR('',#191231,1.); +#191231 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#191232 = PLANE('',#191233); +#191233 = AXIS2_PLACEMENT_3D('',#191234,#191235,#191236); +#191234 = CARTESIAN_POINT('',(144.871921,-109.7695,1.51)); +#191235 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#191236 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#191237 = ADVANCED_FACE('',(#191238),#191263,.T.); +#191238 = FACE_BOUND('',#191239,.T.); +#191239 = EDGE_LOOP('',(#191240,#191241,#191249,#191257)); +#191240 = ORIENTED_EDGE('',*,*,#191219,.T.); +#191241 = ORIENTED_EDGE('',*,*,#191242,.T.); +#191242 = EDGE_CURVE('',#191212,#191243,#191245,.T.); +#191243 = VERTEX_POINT('',#191244); +#191244 = CARTESIAN_POINT('',(144.848079,-112.519509,1.545)); +#191245 = LINE('',#191246,#191247); +#191246 = CARTESIAN_POINT('',(144.85,-109.791421,1.545)); +#191247 = VECTOR('',#191248,1.); +#191248 = DIRECTION('',(-7.041559963357E-04,-0.999999752082,0.)); +#191249 = ORIENTED_EDGE('',*,*,#191250,.F.); +#191250 = EDGE_CURVE('',#191251,#191243,#191253,.T.); +#191251 = VERTEX_POINT('',#191252); +#191252 = CARTESIAN_POINT('',(144.848079,-112.519509,1.51)); +#191253 = LINE('',#191254,#191255); +#191254 = CARTESIAN_POINT('',(144.848079,-112.519509,1.51)); +#191255 = VECTOR('',#191256,1.); +#191256 = DIRECTION('',(0.,0.,1.)); +#191257 = ORIENTED_EDGE('',*,*,#191258,.F.); +#191258 = EDGE_CURVE('',#191220,#191251,#191259,.T.); +#191259 = LINE('',#191260,#191261); +#191260 = CARTESIAN_POINT('',(144.85,-109.791421,1.51)); +#191261 = VECTOR('',#191262,1.); +#191262 = DIRECTION('',(-7.041559963357E-04,-0.999999752082,0.)); +#191263 = PLANE('',#191264); +#191264 = AXIS2_PLACEMENT_3D('',#191265,#191266,#191267); +#191265 = CARTESIAN_POINT('',(144.85,-109.791421,1.51)); +#191266 = DIRECTION('',(0.999999752082,-7.041559963357E-04,0.)); +#191267 = DIRECTION('',(-7.041559963357E-04,-0.999999752082,0.)); +#191268 = ADVANCED_FACE('',(#191269),#191296,.T.); +#191269 = FACE_BOUND('',#191270,.T.); +#191270 = EDGE_LOOP('',(#191271,#191272,#191281,#191289)); +#191271 = ORIENTED_EDGE('',*,*,#191250,.T.); +#191272 = ORIENTED_EDGE('',*,*,#191273,.T.); +#191273 = EDGE_CURVE('',#191243,#191274,#191276,.T.); +#191274 = VERTEX_POINT('',#191275); +#191275 = CARTESIAN_POINT('',(144.651921,-112.519509,1.545)); +#191276 = CIRCLE('',#191277,0.100000456609); +#191277 = AXIS2_PLACEMENT_3D('',#191278,#191279,#191280); +#191278 = CARTESIAN_POINT('',(144.75,-112.5,1.545)); +#191279 = DIRECTION('',(-0.,0.,-1.)); +#191280 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#191281 = ORIENTED_EDGE('',*,*,#191282,.F.); +#191282 = EDGE_CURVE('',#191283,#191274,#191285,.T.); +#191283 = VERTEX_POINT('',#191284); +#191284 = CARTESIAN_POINT('',(144.651921,-112.519509,1.51)); +#191285 = LINE('',#191286,#191287); +#191286 = CARTESIAN_POINT('',(144.651921,-112.519509,1.51)); +#191287 = VECTOR('',#191288,1.); +#191288 = DIRECTION('',(0.,0.,1.)); +#191289 = ORIENTED_EDGE('',*,*,#191290,.F.); +#191290 = EDGE_CURVE('',#191251,#191283,#191291,.T.); +#191291 = CIRCLE('',#191292,0.100000456609); +#191292 = AXIS2_PLACEMENT_3D('',#191293,#191294,#191295); +#191293 = CARTESIAN_POINT('',(144.75,-112.5,1.51)); +#191294 = DIRECTION('',(-0.,0.,-1.)); +#191295 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#191296 = CYLINDRICAL_SURFACE('',#191297,0.100000456609); +#191297 = AXIS2_PLACEMENT_3D('',#191298,#191299,#191300); +#191298 = CARTESIAN_POINT('',(144.75,-112.5,1.51)); +#191299 = DIRECTION('',(-0.,0.,-1.)); +#191300 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#191301 = ADVANCED_FACE('',(#191302),#191327,.T.); +#191302 = FACE_BOUND('',#191303,.T.); +#191303 = EDGE_LOOP('',(#191304,#191305,#191313,#191321)); +#191304 = ORIENTED_EDGE('',*,*,#191282,.T.); +#191305 = ORIENTED_EDGE('',*,*,#191306,.T.); +#191306 = EDGE_CURVE('',#191274,#191307,#191309,.T.); +#191307 = VERTEX_POINT('',#191308); +#191308 = CARTESIAN_POINT('',(144.651921,-109.730491,1.545)); +#191309 = LINE('',#191310,#191311); +#191310 = CARTESIAN_POINT('',(144.651921,-112.519509,1.545)); +#191311 = VECTOR('',#191312,1.); +#191312 = DIRECTION('',(0.,1.,0.)); +#191313 = ORIENTED_EDGE('',*,*,#191314,.F.); +#191314 = EDGE_CURVE('',#191315,#191307,#191317,.T.); +#191315 = VERTEX_POINT('',#191316); +#191316 = CARTESIAN_POINT('',(144.651921,-109.730491,1.51)); +#191317 = LINE('',#191318,#191319); +#191318 = CARTESIAN_POINT('',(144.651921,-109.730491,1.51)); +#191319 = VECTOR('',#191320,1.); +#191320 = DIRECTION('',(0.,0.,1.)); +#191321 = ORIENTED_EDGE('',*,*,#191322,.F.); +#191322 = EDGE_CURVE('',#191283,#191315,#191323,.T.); +#191323 = LINE('',#191324,#191325); +#191324 = CARTESIAN_POINT('',(144.651921,-112.519509,1.51)); +#191325 = VECTOR('',#191326,1.); +#191326 = DIRECTION('',(0.,1.,0.)); +#191327 = PLANE('',#191328); +#191328 = AXIS2_PLACEMENT_3D('',#191329,#191330,#191331); +#191329 = CARTESIAN_POINT('',(144.651921,-112.519509,1.51)); +#191330 = DIRECTION('',(-1.,0.,0.)); +#191331 = DIRECTION('',(0.,1.,0.)); +#191332 = ADVANCED_FACE('',(#191333),#191358,.T.); +#191333 = FACE_BOUND('',#191334,.T.); +#191334 = EDGE_LOOP('',(#191335,#191336,#191344,#191352)); +#191335 = ORIENTED_EDGE('',*,*,#191314,.T.); +#191336 = ORIENTED_EDGE('',*,*,#191337,.T.); +#191337 = EDGE_CURVE('',#191307,#191338,#191340,.T.); +#191338 = VERTEX_POINT('',#191339); +#191339 = CARTESIAN_POINT('',(144.666853,-109.694443,1.545)); +#191340 = LINE('',#191341,#191342); +#191341 = CARTESIAN_POINT('',(144.651921,-109.730491,1.545)); +#191342 = VECTOR('',#191343,1.); +#191343 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#191344 = ORIENTED_EDGE('',*,*,#191345,.F.); +#191345 = EDGE_CURVE('',#191346,#191338,#191348,.T.); +#191346 = VERTEX_POINT('',#191347); +#191347 = CARTESIAN_POINT('',(144.666853,-109.694443,1.51)); +#191348 = LINE('',#191349,#191350); +#191349 = CARTESIAN_POINT('',(144.666853,-109.694443,1.51)); +#191350 = VECTOR('',#191351,1.); +#191351 = DIRECTION('',(0.,0.,1.)); +#191352 = ORIENTED_EDGE('',*,*,#191353,.F.); +#191353 = EDGE_CURVE('',#191315,#191346,#191354,.T.); +#191354 = LINE('',#191355,#191356); +#191355 = CARTESIAN_POINT('',(144.651921,-109.730491,1.51)); +#191356 = VECTOR('',#191357,1.); +#191357 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#191358 = PLANE('',#191359); +#191359 = AXIS2_PLACEMENT_3D('',#191360,#191361,#191362); +#191360 = CARTESIAN_POINT('',(144.651921,-109.730491,1.51)); +#191361 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#191362 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#191363 = ADVANCED_FACE('',(#191364),#191389,.T.); +#191364 = FACE_BOUND('',#191365,.T.); +#191365 = EDGE_LOOP('',(#191366,#191367,#191375,#191383)); +#191366 = ORIENTED_EDGE('',*,*,#191345,.T.); +#191367 = ORIENTED_EDGE('',*,*,#191368,.T.); +#191368 = EDGE_CURVE('',#191338,#191369,#191371,.T.); +#191369 = VERTEX_POINT('',#191370); +#191370 = CARTESIAN_POINT('',(144.730499,-109.628078,1.545)); +#191371 = LINE('',#191372,#191373); +#191372 = CARTESIAN_POINT('',(144.666853,-109.694443,1.545)); +#191373 = VECTOR('',#191374,1.); +#191374 = DIRECTION('',(0.692167268932,0.721737120993,0.)); +#191375 = ORIENTED_EDGE('',*,*,#191376,.F.); +#191376 = EDGE_CURVE('',#191377,#191369,#191379,.T.); +#191377 = VERTEX_POINT('',#191378); +#191378 = CARTESIAN_POINT('',(144.730499,-109.628078,1.51)); +#191379 = LINE('',#191380,#191381); +#191380 = CARTESIAN_POINT('',(144.730499,-109.628078,1.51)); +#191381 = VECTOR('',#191382,1.); +#191382 = DIRECTION('',(0.,0.,1.)); +#191383 = ORIENTED_EDGE('',*,*,#191384,.F.); +#191384 = EDGE_CURVE('',#191346,#191377,#191385,.T.); +#191385 = LINE('',#191386,#191387); +#191386 = CARTESIAN_POINT('',(144.666853,-109.694443,1.51)); +#191387 = VECTOR('',#191388,1.); +#191388 = DIRECTION('',(0.692167268932,0.721737120993,0.)); +#191389 = PLANE('',#191390); +#191390 = AXIS2_PLACEMENT_3D('',#191391,#191392,#191393); +#191391 = CARTESIAN_POINT('',(144.666853,-109.694443,1.51)); +#191392 = DIRECTION('',(-0.721737120993,0.692167268932,0.)); +#191393 = DIRECTION('',(0.692167268932,0.721737120993,0.)); +#191394 = ADVANCED_FACE('',(#191395),#191420,.T.); +#191395 = FACE_BOUND('',#191396,.T.); +#191396 = EDGE_LOOP('',(#191397,#191398,#191406,#191414)); +#191397 = ORIENTED_EDGE('',*,*,#191376,.T.); +#191398 = ORIENTED_EDGE('',*,*,#191399,.T.); +#191399 = EDGE_CURVE('',#191369,#191400,#191402,.T.); +#191400 = VERTEX_POINT('',#191401); +#191401 = CARTESIAN_POINT('',(144.722836,-109.614805,1.545)); +#191402 = LINE('',#191403,#191404); +#191403 = CARTESIAN_POINT('',(144.730499,-109.628078,1.545)); +#191404 = VECTOR('',#191405,1.); +#191405 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#191406 = ORIENTED_EDGE('',*,*,#191407,.F.); +#191407 = EDGE_CURVE('',#191408,#191400,#191410,.T.); +#191408 = VERTEX_POINT('',#191409); +#191409 = CARTESIAN_POINT('',(144.722836,-109.614805,1.51)); +#191410 = LINE('',#191411,#191412); +#191411 = CARTESIAN_POINT('',(144.722836,-109.614805,1.51)); +#191412 = VECTOR('',#191413,1.); +#191413 = DIRECTION('',(0.,0.,1.)); +#191414 = ORIENTED_EDGE('',*,*,#191415,.F.); +#191415 = EDGE_CURVE('',#191377,#191408,#191416,.T.); +#191416 = LINE('',#191417,#191418); +#191417 = CARTESIAN_POINT('',(144.730499,-109.628078,1.51)); +#191418 = VECTOR('',#191419,1.); +#191419 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#191420 = PLANE('',#191421); +#191421 = AXIS2_PLACEMENT_3D('',#191422,#191423,#191424); +#191422 = CARTESIAN_POINT('',(144.730499,-109.628078,1.51)); +#191423 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#191424 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#191425 = ADVANCED_FACE('',(#191426),#191453,.T.); +#191426 = FACE_BOUND('',#191427,.T.); +#191427 = EDGE_LOOP('',(#191428,#191429,#191438,#191446)); +#191428 = ORIENTED_EDGE('',*,*,#191407,.T.); +#191429 = ORIENTED_EDGE('',*,*,#191430,.T.); +#191430 = EDGE_CURVE('',#191400,#191431,#191433,.T.); +#191431 = VERTEX_POINT('',#191432); +#191432 = CARTESIAN_POINT('',(144.885195,-109.777164,1.545)); +#191433 = CIRCLE('',#191434,0.300000118202); +#191434 = AXIS2_PLACEMENT_3D('',#191435,#191436,#191437); +#191435 = CARTESIAN_POINT('',(145.,-109.5,1.545)); +#191436 = DIRECTION('',(0.,0.,-1.)); +#191437 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#191438 = ORIENTED_EDGE('',*,*,#191439,.F.); +#191439 = EDGE_CURVE('',#191440,#191431,#191442,.T.); +#191440 = VERTEX_POINT('',#191441); +#191441 = CARTESIAN_POINT('',(144.885195,-109.777164,1.51)); +#191442 = LINE('',#191443,#191444); +#191443 = CARTESIAN_POINT('',(144.885195,-109.777164,1.51)); +#191444 = VECTOR('',#191445,1.); +#191445 = DIRECTION('',(0.,0.,1.)); +#191446 = ORIENTED_EDGE('',*,*,#191447,.F.); +#191447 = EDGE_CURVE('',#191408,#191440,#191448,.T.); +#191448 = CIRCLE('',#191449,0.300000118202); +#191449 = AXIS2_PLACEMENT_3D('',#191450,#191451,#191452); +#191450 = CARTESIAN_POINT('',(145.,-109.5,1.51)); +#191451 = DIRECTION('',(0.,0.,-1.)); +#191452 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#191453 = CYLINDRICAL_SURFACE('',#191454,0.300000118202); +#191454 = AXIS2_PLACEMENT_3D('',#191455,#191456,#191457); +#191455 = CARTESIAN_POINT('',(145.,-109.5,1.51)); +#191456 = DIRECTION('',(0.,0.,-1.)); +#191457 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#191458 = ADVANCED_FACE('',(#191459),#191475,.T.); +#191459 = FACE_BOUND('',#191460,.T.); +#191460 = EDGE_LOOP('',(#191461,#191462,#191468,#191469)); +#191461 = ORIENTED_EDGE('',*,*,#191439,.T.); +#191462 = ORIENTED_EDGE('',*,*,#191463,.T.); +#191463 = EDGE_CURVE('',#191431,#191204,#191464,.T.); +#191464 = LINE('',#191465,#191466); +#191465 = CARTESIAN_POINT('',(144.885195,-109.777164,1.545)); +#191466 = VECTOR('',#191467,1.); +#191467 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#191468 = ORIENTED_EDGE('',*,*,#191201,.F.); +#191469 = ORIENTED_EDGE('',*,*,#191470,.F.); +#191470 = EDGE_CURVE('',#191440,#191202,#191471,.T.); +#191471 = LINE('',#191472,#191473); +#191472 = CARTESIAN_POINT('',(144.885195,-109.777164,1.51)); +#191473 = VECTOR('',#191474,1.); +#191474 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#191475 = PLANE('',#191476); +#191476 = AXIS2_PLACEMENT_3D('',#191477,#191478,#191479); +#191477 = CARTESIAN_POINT('',(144.885195,-109.777164,1.51)); +#191478 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#191479 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#191480 = ADVANCED_FACE('',(#191481),#191508,.F.); +#191481 = FACE_BOUND('',#191482,.T.); +#191482 = EDGE_LOOP('',(#191483,#191493,#191500,#191501)); +#191483 = ORIENTED_EDGE('',*,*,#191484,.T.); +#191484 = EDGE_CURVE('',#191485,#191487,#191489,.T.); +#191485 = VERTEX_POINT('',#191486); +#191486 = CARTESIAN_POINT('',(145.137255,-109.5,1.51)); +#191487 = VERTEX_POINT('',#191488); +#191488 = CARTESIAN_POINT('',(145.137255,-109.5,1.545)); +#191489 = LINE('',#191490,#191491); +#191490 = CARTESIAN_POINT('',(145.137255,-109.5,1.51)); +#191491 = VECTOR('',#191492,1.); +#191492 = DIRECTION('',(0.,0.,1.)); +#191493 = ORIENTED_EDGE('',*,*,#191494,.T.); +#191494 = EDGE_CURVE('',#191487,#191487,#191495,.T.); +#191495 = CIRCLE('',#191496,0.137255); +#191496 = AXIS2_PLACEMENT_3D('',#191497,#191498,#191499); +#191497 = CARTESIAN_POINT('',(145.,-109.5,1.545)); +#191498 = DIRECTION('',(0.,0.,1.)); +#191499 = DIRECTION('',(1.,0.,-0.)); +#191500 = ORIENTED_EDGE('',*,*,#191484,.F.); +#191501 = ORIENTED_EDGE('',*,*,#191502,.F.); +#191502 = EDGE_CURVE('',#191485,#191485,#191503,.T.); +#191503 = CIRCLE('',#191504,0.137255); +#191504 = AXIS2_PLACEMENT_3D('',#191505,#191506,#191507); +#191505 = CARTESIAN_POINT('',(145.,-109.5,1.51)); +#191506 = DIRECTION('',(0.,0.,1.)); +#191507 = DIRECTION('',(1.,0.,-0.)); +#191508 = CYLINDRICAL_SURFACE('',#191509,0.137255); +#191509 = AXIS2_PLACEMENT_3D('',#191510,#191511,#191512); +#191510 = CARTESIAN_POINT('',(145.,-109.5,1.51)); +#191511 = DIRECTION('',(-0.,-0.,-1.)); +#191512 = DIRECTION('',(1.,0.,-0.)); +#191513 = ADVANCED_FACE('',(#191514,#191525),#191528,.F.); +#191514 = FACE_BOUND('',#191515,.T.); +#191515 = EDGE_LOOP('',(#191516,#191517,#191518,#191519,#191520,#191521, + #191522,#191523,#191524)); +#191516 = ORIENTED_EDGE('',*,*,#191227,.T.); +#191517 = ORIENTED_EDGE('',*,*,#191258,.T.); +#191518 = ORIENTED_EDGE('',*,*,#191290,.T.); +#191519 = ORIENTED_EDGE('',*,*,#191322,.T.); +#191520 = ORIENTED_EDGE('',*,*,#191353,.T.); +#191521 = ORIENTED_EDGE('',*,*,#191384,.T.); +#191522 = ORIENTED_EDGE('',*,*,#191415,.T.); +#191523 = ORIENTED_EDGE('',*,*,#191447,.T.); +#191524 = ORIENTED_EDGE('',*,*,#191470,.T.); +#191525 = FACE_BOUND('',#191526,.T.); +#191526 = EDGE_LOOP('',(#191527)); +#191527 = ORIENTED_EDGE('',*,*,#191502,.T.); +#191528 = PLANE('',#191529); +#191529 = AXIS2_PLACEMENT_3D('',#191530,#191531,#191532); +#191530 = CARTESIAN_POINT('',(0.,0.,1.51)); +#191531 = DIRECTION('',(0.,0.,1.)); +#191532 = DIRECTION('',(1.,0.,-0.)); +#191533 = ADVANCED_FACE('',(#191534,#191545),#191548,.T.); +#191534 = FACE_BOUND('',#191535,.F.); +#191535 = EDGE_LOOP('',(#191536,#191537,#191538,#191539,#191540,#191541, + #191542,#191543,#191544)); +#191536 = ORIENTED_EDGE('',*,*,#191211,.T.); +#191537 = ORIENTED_EDGE('',*,*,#191242,.T.); +#191538 = ORIENTED_EDGE('',*,*,#191273,.T.); +#191539 = ORIENTED_EDGE('',*,*,#191306,.T.); +#191540 = ORIENTED_EDGE('',*,*,#191337,.T.); +#191541 = ORIENTED_EDGE('',*,*,#191368,.T.); +#191542 = ORIENTED_EDGE('',*,*,#191399,.T.); +#191543 = ORIENTED_EDGE('',*,*,#191430,.T.); +#191544 = ORIENTED_EDGE('',*,*,#191463,.T.); +#191545 = FACE_BOUND('',#191546,.F.); +#191546 = EDGE_LOOP('',(#191547)); +#191547 = ORIENTED_EDGE('',*,*,#191494,.T.); +#191548 = PLANE('',#191549); +#191549 = AXIS2_PLACEMENT_3D('',#191550,#191551,#191552); +#191550 = CARTESIAN_POINT('',(0.,0.,1.545)); +#191551 = DIRECTION('',(0.,0.,1.)); +#191552 = DIRECTION('',(1.,0.,-0.)); +#191553 = MANIFOLD_SOLID_BREP('',#191554); +#191554 = CLOSED_SHELL('',(#191555,#191595,#191626,#191659,#191690, + #191721,#191752,#191785,#191816,#191838,#191871,#191891)); +#191555 = ADVANCED_FACE('',(#191556),#191590,.T.); +#191556 = FACE_BOUND('',#191557,.T.); +#191557 = EDGE_LOOP('',(#191558,#191568,#191576,#191584)); +#191558 = ORIENTED_EDGE('',*,*,#191559,.T.); +#191559 = EDGE_CURVE('',#191560,#191562,#191564,.T.); +#191560 = VERTEX_POINT('',#191561); +#191561 = CARTESIAN_POINT('',(146.054442,-79.806853,1.51)); +#191562 = VERTEX_POINT('',#191563); +#191563 = CARTESIAN_POINT('',(146.054442,-79.806853,1.545)); +#191564 = LINE('',#191565,#191566); +#191565 = CARTESIAN_POINT('',(146.054442,-79.806853,1.51)); +#191566 = VECTOR('',#191567,1.); +#191567 = DIRECTION('',(0.,0.,1.)); +#191568 = ORIENTED_EDGE('',*,*,#191569,.T.); +#191569 = EDGE_CURVE('',#191562,#191570,#191572,.T.); +#191570 = VERTEX_POINT('',#191571); +#191571 = CARTESIAN_POINT('',(146.090491,-79.791921,1.545)); +#191572 = LINE('',#191573,#191574); +#191573 = CARTESIAN_POINT('',(146.054442,-79.806853,1.545)); +#191574 = VECTOR('',#191575,1.); +#191575 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#191576 = ORIENTED_EDGE('',*,*,#191577,.F.); +#191577 = EDGE_CURVE('',#191578,#191570,#191580,.T.); +#191578 = VERTEX_POINT('',#191579); +#191579 = CARTESIAN_POINT('',(146.090491,-79.791921,1.51)); +#191580 = LINE('',#191581,#191582); +#191581 = CARTESIAN_POINT('',(146.090491,-79.791921,1.51)); +#191582 = VECTOR('',#191583,1.); +#191583 = DIRECTION('',(0.,0.,1.)); +#191584 = ORIENTED_EDGE('',*,*,#191585,.F.); +#191585 = EDGE_CURVE('',#191560,#191578,#191586,.T.); +#191586 = LINE('',#191587,#191588); +#191587 = CARTESIAN_POINT('',(146.054442,-79.806853,1.51)); +#191588 = VECTOR('',#191589,1.); +#191589 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#191590 = PLANE('',#191591); +#191591 = AXIS2_PLACEMENT_3D('',#191592,#191593,#191594); +#191592 = CARTESIAN_POINT('',(146.054442,-79.806853,1.51)); +#191593 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#191594 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#191595 = ADVANCED_FACE('',(#191596),#191621,.T.); +#191596 = FACE_BOUND('',#191597,.T.); +#191597 = EDGE_LOOP('',(#191598,#191599,#191607,#191615)); +#191598 = ORIENTED_EDGE('',*,*,#191577,.T.); +#191599 = ORIENTED_EDGE('',*,*,#191600,.T.); +#191600 = EDGE_CURVE('',#191570,#191601,#191603,.T.); +#191601 = VERTEX_POINT('',#191602); +#191602 = CARTESIAN_POINT('',(146.769509,-79.791921,1.545)); +#191603 = LINE('',#191604,#191605); +#191604 = CARTESIAN_POINT('',(146.090491,-79.791921,1.545)); +#191605 = VECTOR('',#191606,1.); +#191606 = DIRECTION('',(1.,0.,0.)); +#191607 = ORIENTED_EDGE('',*,*,#191608,.F.); +#191608 = EDGE_CURVE('',#191609,#191601,#191611,.T.); +#191609 = VERTEX_POINT('',#191610); +#191610 = CARTESIAN_POINT('',(146.769509,-79.791921,1.51)); +#191611 = LINE('',#191612,#191613); +#191612 = CARTESIAN_POINT('',(146.769509,-79.791921,1.51)); +#191613 = VECTOR('',#191614,1.); +#191614 = DIRECTION('',(0.,0.,1.)); +#191615 = ORIENTED_EDGE('',*,*,#191616,.F.); +#191616 = EDGE_CURVE('',#191578,#191609,#191617,.T.); +#191617 = LINE('',#191618,#191619); +#191618 = CARTESIAN_POINT('',(146.090491,-79.791921,1.51)); +#191619 = VECTOR('',#191620,1.); +#191620 = DIRECTION('',(1.,0.,0.)); +#191621 = PLANE('',#191622); +#191622 = AXIS2_PLACEMENT_3D('',#191623,#191624,#191625); +#191623 = CARTESIAN_POINT('',(146.090491,-79.791921,1.51)); +#191624 = DIRECTION('',(0.,1.,0.)); +#191625 = DIRECTION('',(1.,0.,0.)); +#191626 = ADVANCED_FACE('',(#191627),#191654,.T.); +#191627 = FACE_BOUND('',#191628,.T.); +#191628 = EDGE_LOOP('',(#191629,#191630,#191639,#191647)); +#191629 = ORIENTED_EDGE('',*,*,#191608,.T.); +#191630 = ORIENTED_EDGE('',*,*,#191631,.T.); +#191631 = EDGE_CURVE('',#191601,#191632,#191634,.T.); +#191632 = VERTEX_POINT('',#191633); +#191633 = CARTESIAN_POINT('',(146.769509,-79.988079,1.545)); +#191634 = CIRCLE('',#191635,0.100000456609); +#191635 = AXIS2_PLACEMENT_3D('',#191636,#191637,#191638); +#191636 = CARTESIAN_POINT('',(146.75,-79.89,1.545)); +#191637 = DIRECTION('',(0.,0.,-1.)); +#191638 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#191639 = ORIENTED_EDGE('',*,*,#191640,.F.); +#191640 = EDGE_CURVE('',#191641,#191632,#191643,.T.); +#191641 = VERTEX_POINT('',#191642); +#191642 = CARTESIAN_POINT('',(146.769509,-79.988079,1.51)); +#191643 = LINE('',#191644,#191645); +#191644 = CARTESIAN_POINT('',(146.769509,-79.988079,1.51)); +#191645 = VECTOR('',#191646,1.); +#191646 = DIRECTION('',(0.,0.,1.)); +#191647 = ORIENTED_EDGE('',*,*,#191648,.F.); +#191648 = EDGE_CURVE('',#191609,#191641,#191649,.T.); +#191649 = CIRCLE('',#191650,0.100000456609); +#191650 = AXIS2_PLACEMENT_3D('',#191651,#191652,#191653); +#191651 = CARTESIAN_POINT('',(146.75,-79.89,1.51)); +#191652 = DIRECTION('',(0.,0.,-1.)); +#191653 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#191654 = CYLINDRICAL_SURFACE('',#191655,0.100000456609); +#191655 = AXIS2_PLACEMENT_3D('',#191656,#191657,#191658); +#191656 = CARTESIAN_POINT('',(146.75,-79.89,1.51)); +#191657 = DIRECTION('',(0.,0.,-1.)); +#191658 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#191659 = ADVANCED_FACE('',(#191660),#191685,.T.); +#191660 = FACE_BOUND('',#191661,.T.); +#191661 = EDGE_LOOP('',(#191662,#191663,#191671,#191679)); +#191662 = ORIENTED_EDGE('',*,*,#191640,.T.); +#191663 = ORIENTED_EDGE('',*,*,#191664,.T.); +#191664 = EDGE_CURVE('',#191632,#191665,#191667,.T.); +#191665 = VERTEX_POINT('',#191666); +#191666 = CARTESIAN_POINT('',(146.151421,-79.99,1.545)); +#191667 = LINE('',#191668,#191669); +#191668 = CARTESIAN_POINT('',(146.769509,-79.988079,1.545)); +#191669 = VECTOR('',#191670,1.); +#191670 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#191671 = ORIENTED_EDGE('',*,*,#191672,.F.); +#191672 = EDGE_CURVE('',#191673,#191665,#191675,.T.); +#191673 = VERTEX_POINT('',#191674); +#191674 = CARTESIAN_POINT('',(146.151421,-79.99,1.51)); +#191675 = LINE('',#191676,#191677); +#191676 = CARTESIAN_POINT('',(146.151421,-79.99,1.51)); +#191677 = VECTOR('',#191678,1.); +#191678 = DIRECTION('',(0.,0.,1.)); +#191679 = ORIENTED_EDGE('',*,*,#191680,.F.); +#191680 = EDGE_CURVE('',#191641,#191673,#191681,.T.); +#191681 = LINE('',#191682,#191683); +#191682 = CARTESIAN_POINT('',(146.769509,-79.988079,1.51)); +#191683 = VECTOR('',#191684,1.); +#191684 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#191685 = PLANE('',#191686); +#191686 = AXIS2_PLACEMENT_3D('',#191687,#191688,#191689); +#191687 = CARTESIAN_POINT('',(146.769509,-79.988079,1.51)); +#191688 = DIRECTION('',(3.107956669802E-03,-0.999995170291,0.)); +#191689 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#191690 = ADVANCED_FACE('',(#191691),#191716,.T.); +#191691 = FACE_BOUND('',#191692,.T.); +#191692 = EDGE_LOOP('',(#191693,#191694,#191702,#191710)); +#191693 = ORIENTED_EDGE('',*,*,#191672,.T.); +#191694 = ORIENTED_EDGE('',*,*,#191695,.T.); +#191695 = EDGE_CURVE('',#191665,#191696,#191698,.T.); +#191696 = VERTEX_POINT('',#191697); +#191697 = CARTESIAN_POINT('',(145.7695,-80.371921,1.545)); +#191698 = LINE('',#191699,#191700); +#191699 = CARTESIAN_POINT('',(146.151421,-79.99,1.545)); +#191700 = VECTOR('',#191701,1.); +#191701 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#191702 = ORIENTED_EDGE('',*,*,#191703,.F.); +#191703 = EDGE_CURVE('',#191704,#191696,#191706,.T.); +#191704 = VERTEX_POINT('',#191705); +#191705 = CARTESIAN_POINT('',(145.7695,-80.371921,1.51)); +#191706 = LINE('',#191707,#191708); +#191707 = CARTESIAN_POINT('',(145.7695,-80.371921,1.51)); +#191708 = VECTOR('',#191709,1.); +#191709 = DIRECTION('',(0.,0.,1.)); +#191710 = ORIENTED_EDGE('',*,*,#191711,.F.); +#191711 = EDGE_CURVE('',#191673,#191704,#191712,.T.); +#191712 = LINE('',#191713,#191714); +#191713 = CARTESIAN_POINT('',(146.151421,-79.99,1.51)); +#191714 = VECTOR('',#191715,1.); +#191715 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#191716 = PLANE('',#191717); +#191717 = AXIS2_PLACEMENT_3D('',#191718,#191719,#191720); +#191718 = CARTESIAN_POINT('',(146.151421,-79.99,1.51)); +#191719 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#191720 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#191721 = ADVANCED_FACE('',(#191722),#191747,.T.); +#191722 = FACE_BOUND('',#191723,.T.); +#191723 = EDGE_LOOP('',(#191724,#191725,#191733,#191741)); +#191724 = ORIENTED_EDGE('',*,*,#191703,.T.); +#191725 = ORIENTED_EDGE('',*,*,#191726,.T.); +#191726 = EDGE_CURVE('',#191696,#191727,#191729,.T.); +#191727 = VERTEX_POINT('',#191728); +#191728 = CARTESIAN_POINT('',(145.777164,-80.385195,1.545)); +#191729 = LINE('',#191730,#191731); +#191730 = CARTESIAN_POINT('',(145.7695,-80.371921,1.545)); +#191731 = VECTOR('',#191732,1.); +#191732 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#191733 = ORIENTED_EDGE('',*,*,#191734,.F.); +#191734 = EDGE_CURVE('',#191735,#191727,#191737,.T.); +#191735 = VERTEX_POINT('',#191736); +#191736 = CARTESIAN_POINT('',(145.777164,-80.385195,1.51)); +#191737 = LINE('',#191738,#191739); +#191738 = CARTESIAN_POINT('',(145.777164,-80.385195,1.51)); +#191739 = VECTOR('',#191740,1.); +#191740 = DIRECTION('',(0.,0.,1.)); +#191741 = ORIENTED_EDGE('',*,*,#191742,.F.); +#191742 = EDGE_CURVE('',#191704,#191735,#191743,.T.); +#191743 = LINE('',#191744,#191745); +#191744 = CARTESIAN_POINT('',(145.7695,-80.371921,1.51)); +#191745 = VECTOR('',#191746,1.); +#191746 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#191747 = PLANE('',#191748); +#191748 = AXIS2_PLACEMENT_3D('',#191749,#191750,#191751); +#191749 = CARTESIAN_POINT('',(145.7695,-80.371921,1.51)); +#191750 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#191751 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#191752 = ADVANCED_FACE('',(#191753),#191780,.T.); +#191753 = FACE_BOUND('',#191754,.T.); +#191754 = EDGE_LOOP('',(#191755,#191756,#191765,#191773)); +#191755 = ORIENTED_EDGE('',*,*,#191734,.T.); +#191756 = ORIENTED_EDGE('',*,*,#191757,.T.); +#191757 = EDGE_CURVE('',#191727,#191758,#191760,.T.); +#191758 = VERTEX_POINT('',#191759); +#191759 = CARTESIAN_POINT('',(145.614805,-80.222836,1.545)); +#191760 = CIRCLE('',#191761,0.299999934501); +#191761 = AXIS2_PLACEMENT_3D('',#191762,#191763,#191764); +#191762 = CARTESIAN_POINT('',(145.50000014059,-80.4999998594,1.545)); +#191763 = DIRECTION('',(0.,0.,-1.)); +#191764 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#191765 = ORIENTED_EDGE('',*,*,#191766,.F.); +#191766 = EDGE_CURVE('',#191767,#191758,#191769,.T.); +#191767 = VERTEX_POINT('',#191768); +#191768 = CARTESIAN_POINT('',(145.614805,-80.222836,1.51)); +#191769 = LINE('',#191770,#191771); +#191770 = CARTESIAN_POINT('',(145.614805,-80.222836,1.51)); +#191771 = VECTOR('',#191772,1.); +#191772 = DIRECTION('',(0.,0.,1.)); +#191773 = ORIENTED_EDGE('',*,*,#191774,.F.); +#191774 = EDGE_CURVE('',#191735,#191767,#191775,.T.); +#191775 = CIRCLE('',#191776,0.299999934501); +#191776 = AXIS2_PLACEMENT_3D('',#191777,#191778,#191779); +#191777 = CARTESIAN_POINT('',(145.50000014059,-80.4999998594,1.51)); +#191778 = DIRECTION('',(0.,0.,-1.)); +#191779 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#191780 = CYLINDRICAL_SURFACE('',#191781,0.299999934501); +#191781 = AXIS2_PLACEMENT_3D('',#191782,#191783,#191784); +#191782 = CARTESIAN_POINT('',(145.50000014059,-80.4999998594,1.51)); +#191783 = DIRECTION('',(0.,0.,-1.)); +#191784 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#191785 = ADVANCED_FACE('',(#191786),#191811,.T.); +#191786 = FACE_BOUND('',#191787,.T.); +#191787 = EDGE_LOOP('',(#191788,#191789,#191797,#191805)); +#191788 = ORIENTED_EDGE('',*,*,#191766,.T.); +#191789 = ORIENTED_EDGE('',*,*,#191790,.T.); +#191790 = EDGE_CURVE('',#191758,#191791,#191793,.T.); +#191791 = VERTEX_POINT('',#191792); +#191792 = CARTESIAN_POINT('',(145.628078,-80.230499,1.545)); +#191793 = LINE('',#191794,#191795); +#191794 = CARTESIAN_POINT('',(145.614805,-80.222836,1.545)); +#191795 = VECTOR('',#191796,1.); +#191796 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#191797 = ORIENTED_EDGE('',*,*,#191798,.F.); +#191798 = EDGE_CURVE('',#191799,#191791,#191801,.T.); +#191799 = VERTEX_POINT('',#191800); +#191800 = CARTESIAN_POINT('',(145.628078,-80.230499,1.51)); +#191801 = LINE('',#191802,#191803); +#191802 = CARTESIAN_POINT('',(145.628078,-80.230499,1.51)); +#191803 = VECTOR('',#191804,1.); +#191804 = DIRECTION('',(0.,0.,1.)); +#191805 = ORIENTED_EDGE('',*,*,#191806,.F.); +#191806 = EDGE_CURVE('',#191767,#191799,#191807,.T.); +#191807 = LINE('',#191808,#191809); +#191808 = CARTESIAN_POINT('',(145.614805,-80.222836,1.51)); +#191809 = VECTOR('',#191810,1.); +#191810 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#191811 = PLANE('',#191812); +#191812 = AXIS2_PLACEMENT_3D('',#191813,#191814,#191815); +#191813 = CARTESIAN_POINT('',(145.614805,-80.222836,1.51)); +#191814 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#191815 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#191816 = ADVANCED_FACE('',(#191817),#191833,.T.); +#191817 = FACE_BOUND('',#191818,.T.); +#191818 = EDGE_LOOP('',(#191819,#191820,#191826,#191827)); +#191819 = ORIENTED_EDGE('',*,*,#191798,.T.); +#191820 = ORIENTED_EDGE('',*,*,#191821,.T.); +#191821 = EDGE_CURVE('',#191791,#191562,#191822,.T.); +#191822 = LINE('',#191823,#191824); +#191823 = CARTESIAN_POINT('',(145.628078,-80.230499,1.545)); +#191824 = VECTOR('',#191825,1.); +#191825 = DIRECTION('',(0.709364205994,0.704842126475,0.)); +#191826 = ORIENTED_EDGE('',*,*,#191559,.F.); +#191827 = ORIENTED_EDGE('',*,*,#191828,.F.); +#191828 = EDGE_CURVE('',#191799,#191560,#191829,.T.); +#191829 = LINE('',#191830,#191831); +#191830 = CARTESIAN_POINT('',(145.628078,-80.230499,1.51)); +#191831 = VECTOR('',#191832,1.); +#191832 = DIRECTION('',(0.709364205994,0.704842126475,0.)); +#191833 = PLANE('',#191834); +#191834 = AXIS2_PLACEMENT_3D('',#191835,#191836,#191837); +#191835 = CARTESIAN_POINT('',(145.628078,-80.230499,1.51)); +#191836 = DIRECTION('',(-0.704842126475,0.709364205994,0.)); +#191837 = DIRECTION('',(0.709364205994,0.704842126475,0.)); +#191838 = ADVANCED_FACE('',(#191839),#191866,.F.); +#191839 = FACE_BOUND('',#191840,.T.); +#191840 = EDGE_LOOP('',(#191841,#191851,#191858,#191859)); +#191841 = ORIENTED_EDGE('',*,*,#191842,.T.); +#191842 = EDGE_CURVE('',#191843,#191845,#191847,.T.); +#191843 = VERTEX_POINT('',#191844); +#191844 = CARTESIAN_POINT('',(145.637255,-80.5,1.51)); +#191845 = VERTEX_POINT('',#191846); +#191846 = CARTESIAN_POINT('',(145.637255,-80.5,1.545)); +#191847 = LINE('',#191848,#191849); +#191848 = CARTESIAN_POINT('',(145.637255,-80.5,1.51)); +#191849 = VECTOR('',#191850,1.); +#191850 = DIRECTION('',(0.,0.,1.)); +#191851 = ORIENTED_EDGE('',*,*,#191852,.T.); +#191852 = EDGE_CURVE('',#191845,#191845,#191853,.T.); +#191853 = CIRCLE('',#191854,0.137255); +#191854 = AXIS2_PLACEMENT_3D('',#191855,#191856,#191857); +#191855 = CARTESIAN_POINT('',(145.5,-80.5,1.545)); +#191856 = DIRECTION('',(0.,0.,1.)); +#191857 = DIRECTION('',(1.,0.,-0.)); +#191858 = ORIENTED_EDGE('',*,*,#191842,.F.); +#191859 = ORIENTED_EDGE('',*,*,#191860,.F.); +#191860 = EDGE_CURVE('',#191843,#191843,#191861,.T.); +#191861 = CIRCLE('',#191862,0.137255); +#191862 = AXIS2_PLACEMENT_3D('',#191863,#191864,#191865); +#191863 = CARTESIAN_POINT('',(145.5,-80.5,1.51)); +#191864 = DIRECTION('',(0.,0.,1.)); +#191865 = DIRECTION('',(1.,0.,-0.)); +#191866 = CYLINDRICAL_SURFACE('',#191867,0.137255); +#191867 = AXIS2_PLACEMENT_3D('',#191868,#191869,#191870); +#191868 = CARTESIAN_POINT('',(145.5,-80.5,1.51)); +#191869 = DIRECTION('',(-0.,-0.,-1.)); +#191870 = DIRECTION('',(1.,0.,-0.)); +#191871 = ADVANCED_FACE('',(#191872,#191883),#191886,.F.); +#191872 = FACE_BOUND('',#191873,.T.); +#191873 = EDGE_LOOP('',(#191874,#191875,#191876,#191877,#191878,#191879, + #191880,#191881,#191882)); +#191874 = ORIENTED_EDGE('',*,*,#191585,.T.); +#191875 = ORIENTED_EDGE('',*,*,#191616,.T.); +#191876 = ORIENTED_EDGE('',*,*,#191648,.T.); +#191877 = ORIENTED_EDGE('',*,*,#191680,.T.); +#191878 = ORIENTED_EDGE('',*,*,#191711,.T.); +#191879 = ORIENTED_EDGE('',*,*,#191742,.T.); +#191880 = ORIENTED_EDGE('',*,*,#191774,.T.); +#191881 = ORIENTED_EDGE('',*,*,#191806,.T.); +#191882 = ORIENTED_EDGE('',*,*,#191828,.T.); +#191883 = FACE_BOUND('',#191884,.T.); +#191884 = EDGE_LOOP('',(#191885)); +#191885 = ORIENTED_EDGE('',*,*,#191860,.T.); +#191886 = PLANE('',#191887); +#191887 = AXIS2_PLACEMENT_3D('',#191888,#191889,#191890); +#191888 = CARTESIAN_POINT('',(0.,0.,1.51)); +#191889 = DIRECTION('',(0.,0.,1.)); +#191890 = DIRECTION('',(1.,0.,-0.)); +#191891 = ADVANCED_FACE('',(#191892,#191903),#191906,.T.); +#191892 = FACE_BOUND('',#191893,.F.); +#191893 = EDGE_LOOP('',(#191894,#191895,#191896,#191897,#191898,#191899, + #191900,#191901,#191902)); +#191894 = ORIENTED_EDGE('',*,*,#191569,.T.); +#191895 = ORIENTED_EDGE('',*,*,#191600,.T.); +#191896 = ORIENTED_EDGE('',*,*,#191631,.T.); +#191897 = ORIENTED_EDGE('',*,*,#191664,.T.); +#191898 = ORIENTED_EDGE('',*,*,#191695,.T.); +#191899 = ORIENTED_EDGE('',*,*,#191726,.T.); +#191900 = ORIENTED_EDGE('',*,*,#191757,.T.); +#191901 = ORIENTED_EDGE('',*,*,#191790,.T.); +#191902 = ORIENTED_EDGE('',*,*,#191821,.T.); +#191903 = FACE_BOUND('',#191904,.F.); +#191904 = EDGE_LOOP('',(#191905)); +#191905 = ORIENTED_EDGE('',*,*,#191852,.T.); +#191906 = PLANE('',#191907); +#191907 = AXIS2_PLACEMENT_3D('',#191908,#191909,#191910); +#191908 = CARTESIAN_POINT('',(0.,0.,1.545)); +#191909 = DIRECTION('',(0.,0.,1.)); +#191910 = DIRECTION('',(1.,0.,-0.)); +#191911 = MANIFOLD_SOLID_BREP('',#191912); +#191912 = CLOSED_SHELL('',(#191913,#191953,#191984,#192015,#192046, + #192077,#192108,#192139,#192172,#192203,#192234,#192265,#192296, + #192327,#192358,#192389,#192422,#192444,#192477,#192510,#192541)); +#191913 = ADVANCED_FACE('',(#191914),#191948,.F.); +#191914 = FACE_BOUND('',#191915,.F.); +#191915 = EDGE_LOOP('',(#191916,#191926,#191934,#191942)); +#191916 = ORIENTED_EDGE('',*,*,#191917,.T.); +#191917 = EDGE_CURVE('',#191918,#191920,#191922,.T.); +#191918 = VERTEX_POINT('',#191919); +#191919 = CARTESIAN_POINT('',(145.6,-80.78113,0.)); +#191920 = VERTEX_POINT('',#191921); +#191921 = CARTESIAN_POINT('',(145.6,-80.78113,-3.5E-02)); +#191922 = LINE('',#191923,#191924); +#191923 = CARTESIAN_POINT('',(145.6,-80.78113,0.)); +#191924 = VECTOR('',#191925,1.); +#191925 = DIRECTION('',(0.,0.,-1.)); +#191926 = ORIENTED_EDGE('',*,*,#191927,.T.); +#191927 = EDGE_CURVE('',#191920,#191928,#191930,.T.); +#191928 = VERTEX_POINT('',#191929); +#191929 = CARTESIAN_POINT('',(145.6,-90.104745,-3.5E-02)); +#191930 = LINE('',#191931,#191932); +#191931 = CARTESIAN_POINT('',(145.6,-80.78113,-3.5E-02)); +#191932 = VECTOR('',#191933,1.); +#191933 = DIRECTION('',(0.,-1.,0.)); +#191934 = ORIENTED_EDGE('',*,*,#191935,.F.); +#191935 = EDGE_CURVE('',#191936,#191928,#191938,.T.); +#191936 = VERTEX_POINT('',#191937); +#191937 = CARTESIAN_POINT('',(145.6,-90.104745,0.)); +#191938 = LINE('',#191939,#191940); +#191939 = CARTESIAN_POINT('',(145.6,-90.104745,0.)); +#191940 = VECTOR('',#191941,1.); +#191941 = DIRECTION('',(0.,0.,-1.)); +#191942 = ORIENTED_EDGE('',*,*,#191943,.F.); +#191943 = EDGE_CURVE('',#191918,#191936,#191944,.T.); +#191944 = LINE('',#191945,#191946); +#191945 = CARTESIAN_POINT('',(145.6,-80.78113,0.)); +#191946 = VECTOR('',#191947,1.); +#191947 = DIRECTION('',(0.,-1.,0.)); +#191948 = PLANE('',#191949); +#191949 = AXIS2_PLACEMENT_3D('',#191950,#191951,#191952); +#191950 = CARTESIAN_POINT('',(145.6,-80.78113,0.)); +#191951 = DIRECTION('',(-1.,-0.,-0.)); +#191952 = DIRECTION('',(0.,-1.,0.)); +#191953 = ADVANCED_FACE('',(#191954),#191979,.F.); +#191954 = FACE_BOUND('',#191955,.F.); +#191955 = EDGE_LOOP('',(#191956,#191957,#191965,#191973)); +#191956 = ORIENTED_EDGE('',*,*,#191935,.T.); +#191957 = ORIENTED_EDGE('',*,*,#191958,.T.); +#191958 = EDGE_CURVE('',#191928,#191959,#191961,.T.); +#191959 = VERTEX_POINT('',#191960); +#191960 = CARTESIAN_POINT('',(148.183147,-92.69061,-3.5E-02)); +#191961 = LINE('',#191962,#191963); +#191962 = CARTESIAN_POINT('',(145.6,-90.104745,-3.5E-02)); +#191963 = VECTOR('',#191964,1.); +#191964 = DIRECTION('',(0.706734868476,-0.707478498387,0.)); +#191965 = ORIENTED_EDGE('',*,*,#191966,.F.); +#191966 = EDGE_CURVE('',#191967,#191959,#191969,.T.); +#191967 = VERTEX_POINT('',#191968); +#191968 = CARTESIAN_POINT('',(148.183147,-92.69061,0.)); +#191969 = LINE('',#191970,#191971); +#191970 = CARTESIAN_POINT('',(148.183147,-92.69061,0.)); +#191971 = VECTOR('',#191972,1.); +#191972 = DIRECTION('',(0.,0.,-1.)); +#191973 = ORIENTED_EDGE('',*,*,#191974,.F.); +#191974 = EDGE_CURVE('',#191936,#191967,#191975,.T.); +#191975 = LINE('',#191976,#191977); +#191976 = CARTESIAN_POINT('',(145.6,-90.104745,0.)); +#191977 = VECTOR('',#191978,1.); +#191978 = DIRECTION('',(0.706734868476,-0.707478498387,0.)); +#191979 = PLANE('',#191980); +#191980 = AXIS2_PLACEMENT_3D('',#191981,#191982,#191983); +#191981 = CARTESIAN_POINT('',(145.6,-90.104745,0.)); +#191982 = DIRECTION('',(-0.707478498387,-0.706734868476,-0.)); +#191983 = DIRECTION('',(0.706734868476,-0.707478498387,0.)); +#191984 = ADVANCED_FACE('',(#191985),#192010,.F.); +#191985 = FACE_BOUND('',#191986,.F.); +#191986 = EDGE_LOOP('',(#191987,#191988,#191996,#192004)); +#191987 = ORIENTED_EDGE('',*,*,#191966,.T.); +#191988 = ORIENTED_EDGE('',*,*,#191989,.T.); +#191989 = EDGE_CURVE('',#191959,#191990,#191992,.T.); +#191990 = VERTEX_POINT('',#191991); +#191991 = CARTESIAN_POINT('',(148.198079,-92.726658,-3.5E-02)); +#191992 = LINE('',#191993,#191994); +#191993 = CARTESIAN_POINT('',(148.183147,-92.69061,-3.5E-02)); +#191994 = VECTOR('',#191995,1.); +#191995 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#191996 = ORIENTED_EDGE('',*,*,#191997,.F.); +#191997 = EDGE_CURVE('',#191998,#191990,#192000,.T.); +#191998 = VERTEX_POINT('',#191999); +#191999 = CARTESIAN_POINT('',(148.198079,-92.726658,0.)); +#192000 = LINE('',#192001,#192002); +#192001 = CARTESIAN_POINT('',(148.198079,-92.726658,0.)); +#192002 = VECTOR('',#192003,1.); +#192003 = DIRECTION('',(0.,0.,-1.)); +#192004 = ORIENTED_EDGE('',*,*,#192005,.F.); +#192005 = EDGE_CURVE('',#191967,#191998,#192006,.T.); +#192006 = LINE('',#192007,#192008); +#192007 = CARTESIAN_POINT('',(148.183147,-92.69061,0.)); +#192008 = VECTOR('',#192009,1.); +#192009 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#192010 = PLANE('',#192011); +#192011 = AXIS2_PLACEMENT_3D('',#192012,#192013,#192014); +#192012 = CARTESIAN_POINT('',(148.183147,-92.69061,0.)); +#192013 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#192014 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#192015 = ADVANCED_FACE('',(#192016),#192041,.F.); +#192016 = FACE_BOUND('',#192017,.F.); +#192017 = EDGE_LOOP('',(#192018,#192019,#192027,#192035)); +#192018 = ORIENTED_EDGE('',*,*,#191997,.T.); +#192019 = ORIENTED_EDGE('',*,*,#192020,.T.); +#192020 = EDGE_CURVE('',#191990,#192021,#192023,.T.); +#192021 = VERTEX_POINT('',#192022); +#192022 = CARTESIAN_POINT('',(148.198079,-106.419509,-3.5E-02)); +#192023 = LINE('',#192024,#192025); +#192024 = CARTESIAN_POINT('',(148.198079,-92.726658,-3.5E-02)); +#192025 = VECTOR('',#192026,1.); +#192026 = DIRECTION('',(0.,-1.,0.)); +#192027 = ORIENTED_EDGE('',*,*,#192028,.F.); +#192028 = EDGE_CURVE('',#192029,#192021,#192031,.T.); +#192029 = VERTEX_POINT('',#192030); +#192030 = CARTESIAN_POINT('',(148.198079,-106.419509,0.)); +#192031 = LINE('',#192032,#192033); +#192032 = CARTESIAN_POINT('',(148.198079,-106.419509,0.)); +#192033 = VECTOR('',#192034,1.); +#192034 = DIRECTION('',(0.,0.,-1.)); +#192035 = ORIENTED_EDGE('',*,*,#192036,.F.); +#192036 = EDGE_CURVE('',#191998,#192029,#192037,.T.); +#192037 = LINE('',#192038,#192039); +#192038 = CARTESIAN_POINT('',(148.198079,-92.726658,0.)); +#192039 = VECTOR('',#192040,1.); +#192040 = DIRECTION('',(0.,-1.,0.)); +#192041 = PLANE('',#192042); +#192042 = AXIS2_PLACEMENT_3D('',#192043,#192044,#192045); +#192043 = CARTESIAN_POINT('',(148.198079,-92.726658,0.)); +#192044 = DIRECTION('',(-1.,-0.,-0.)); +#192045 = DIRECTION('',(0.,-1.,0.)); +#192046 = ADVANCED_FACE('',(#192047),#192072,.F.); +#192047 = FACE_BOUND('',#192048,.F.); +#192048 = EDGE_LOOP('',(#192049,#192050,#192058,#192066)); +#192049 = ORIENTED_EDGE('',*,*,#192028,.T.); +#192050 = ORIENTED_EDGE('',*,*,#192051,.T.); +#192051 = EDGE_CURVE('',#192021,#192052,#192054,.T.); +#192052 = VERTEX_POINT('',#192053); +#192053 = CARTESIAN_POINT('',(148.183147,-106.455557,-3.5E-02)); +#192054 = LINE('',#192055,#192056); +#192055 = CARTESIAN_POINT('',(148.198079,-106.419509,-3.5E-02)); +#192056 = VECTOR('',#192057,1.); +#192057 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#192058 = ORIENTED_EDGE('',*,*,#192059,.F.); +#192059 = EDGE_CURVE('',#192060,#192052,#192062,.T.); +#192060 = VERTEX_POINT('',#192061); +#192061 = CARTESIAN_POINT('',(148.183147,-106.455557,0.)); +#192062 = LINE('',#192063,#192064); +#192063 = CARTESIAN_POINT('',(148.183147,-106.455557,0.)); +#192064 = VECTOR('',#192065,1.); +#192065 = DIRECTION('',(0.,0.,-1.)); +#192066 = ORIENTED_EDGE('',*,*,#192067,.F.); +#192067 = EDGE_CURVE('',#192029,#192060,#192068,.T.); +#192068 = LINE('',#192069,#192070); +#192069 = CARTESIAN_POINT('',(148.198079,-106.419509,0.)); +#192070 = VECTOR('',#192071,1.); +#192071 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#192072 = PLANE('',#192073); +#192073 = AXIS2_PLACEMENT_3D('',#192074,#192075,#192076); +#192074 = CARTESIAN_POINT('',(148.198079,-106.419509,0.)); +#192075 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#192076 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#192077 = ADVANCED_FACE('',(#192078),#192103,.F.); +#192078 = FACE_BOUND('',#192079,.F.); +#192079 = EDGE_LOOP('',(#192080,#192081,#192089,#192097)); +#192080 = ORIENTED_EDGE('',*,*,#192059,.T.); +#192081 = ORIENTED_EDGE('',*,*,#192082,.T.); +#192082 = EDGE_CURVE('',#192052,#192083,#192085,.T.); +#192083 = VERTEX_POINT('',#192084); +#192084 = CARTESIAN_POINT('',(145.2695,-109.371921,-3.5E-02)); +#192085 = LINE('',#192086,#192087); +#192086 = CARTESIAN_POINT('',(148.183147,-106.455557,-3.5E-02)); +#192087 = VECTOR('',#192088,1.); +#192088 = DIRECTION('',(-0.706777166612,-0.707436242184,0.)); +#192089 = ORIENTED_EDGE('',*,*,#192090,.F.); +#192090 = EDGE_CURVE('',#192091,#192083,#192093,.T.); +#192091 = VERTEX_POINT('',#192092); +#192092 = CARTESIAN_POINT('',(145.2695,-109.371921,0.)); +#192093 = LINE('',#192094,#192095); +#192094 = CARTESIAN_POINT('',(145.2695,-109.371921,0.)); +#192095 = VECTOR('',#192096,1.); +#192096 = DIRECTION('',(0.,0.,-1.)); +#192097 = ORIENTED_EDGE('',*,*,#192098,.F.); +#192098 = EDGE_CURVE('',#192060,#192091,#192099,.T.); +#192099 = LINE('',#192100,#192101); +#192100 = CARTESIAN_POINT('',(148.183147,-106.455557,0.)); +#192101 = VECTOR('',#192102,1.); +#192102 = DIRECTION('',(-0.706777166612,-0.707436242184,0.)); +#192103 = PLANE('',#192104); +#192104 = AXIS2_PLACEMENT_3D('',#192105,#192106,#192107); +#192105 = CARTESIAN_POINT('',(148.183147,-106.455557,0.)); +#192106 = DIRECTION('',(-0.707436242184,0.706777166612,0.)); +#192107 = DIRECTION('',(-0.706777166612,-0.707436242184,0.)); +#192108 = ADVANCED_FACE('',(#192109),#192134,.F.); +#192109 = FACE_BOUND('',#192110,.F.); +#192110 = EDGE_LOOP('',(#192111,#192112,#192120,#192128)); +#192111 = ORIENTED_EDGE('',*,*,#192090,.T.); +#192112 = ORIENTED_EDGE('',*,*,#192113,.T.); +#192113 = EDGE_CURVE('',#192083,#192114,#192116,.T.); +#192114 = VERTEX_POINT('',#192115); +#192115 = CARTESIAN_POINT('',(145.277164,-109.385195,-3.5E-02)); +#192116 = LINE('',#192117,#192118); +#192117 = CARTESIAN_POINT('',(145.2695,-109.371921,-3.5E-02)); +#192118 = VECTOR('',#192119,1.); +#192119 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#192120 = ORIENTED_EDGE('',*,*,#192121,.F.); +#192121 = EDGE_CURVE('',#192122,#192114,#192124,.T.); +#192122 = VERTEX_POINT('',#192123); +#192123 = CARTESIAN_POINT('',(145.277164,-109.385195,0.)); +#192124 = LINE('',#192125,#192126); +#192125 = CARTESIAN_POINT('',(145.277164,-109.385195,0.)); +#192126 = VECTOR('',#192127,1.); +#192127 = DIRECTION('',(0.,0.,-1.)); +#192128 = ORIENTED_EDGE('',*,*,#192129,.F.); +#192129 = EDGE_CURVE('',#192091,#192122,#192130,.T.); +#192130 = LINE('',#192131,#192132); +#192131 = CARTESIAN_POINT('',(145.2695,-109.371921,0.)); +#192132 = VECTOR('',#192133,1.); +#192133 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#192134 = PLANE('',#192135); +#192135 = AXIS2_PLACEMENT_3D('',#192136,#192137,#192138); +#192136 = CARTESIAN_POINT('',(145.2695,-109.371921,0.)); +#192137 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#192138 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#192139 = ADVANCED_FACE('',(#192140),#192167,.T.); +#192140 = FACE_BOUND('',#192141,.F.); +#192141 = EDGE_LOOP('',(#192142,#192143,#192152,#192160)); +#192142 = ORIENTED_EDGE('',*,*,#192121,.T.); +#192143 = ORIENTED_EDGE('',*,*,#192144,.T.); +#192144 = EDGE_CURVE('',#192114,#192145,#192147,.T.); +#192145 = VERTEX_POINT('',#192146); +#192146 = CARTESIAN_POINT('',(145.114805,-109.222836,-3.5E-02)); +#192147 = CIRCLE('',#192148,0.299999934501); +#192148 = AXIS2_PLACEMENT_3D('',#192149,#192150,#192151); +#192149 = CARTESIAN_POINT('',(145.00000014059,-109.4999998594,-3.5E-02) + ); +#192150 = DIRECTION('',(0.,0.,-1.)); +#192151 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#192152 = ORIENTED_EDGE('',*,*,#192153,.F.); +#192153 = EDGE_CURVE('',#192154,#192145,#192156,.T.); +#192154 = VERTEX_POINT('',#192155); +#192155 = CARTESIAN_POINT('',(145.114805,-109.222836,0.)); +#192156 = LINE('',#192157,#192158); +#192157 = CARTESIAN_POINT('',(145.114805,-109.222836,0.)); +#192158 = VECTOR('',#192159,1.); +#192159 = DIRECTION('',(0.,0.,-1.)); +#192160 = ORIENTED_EDGE('',*,*,#192161,.F.); +#192161 = EDGE_CURVE('',#192122,#192154,#192162,.T.); +#192162 = CIRCLE('',#192163,0.299999934501); +#192163 = AXIS2_PLACEMENT_3D('',#192164,#192165,#192166); +#192164 = CARTESIAN_POINT('',(145.00000014059,-109.4999998594,0.)); +#192165 = DIRECTION('',(0.,0.,-1.)); +#192166 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#192167 = CYLINDRICAL_SURFACE('',#192168,0.299999934501); +#192168 = AXIS2_PLACEMENT_3D('',#192169,#192170,#192171); +#192169 = CARTESIAN_POINT('',(145.00000014059,-109.4999998594,0.)); +#192170 = DIRECTION('',(-0.,-0.,1.)); +#192171 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#192172 = ADVANCED_FACE('',(#192173),#192198,.F.); +#192173 = FACE_BOUND('',#192174,.F.); +#192174 = EDGE_LOOP('',(#192175,#192176,#192184,#192192)); +#192175 = ORIENTED_EDGE('',*,*,#192153,.T.); +#192176 = ORIENTED_EDGE('',*,*,#192177,.T.); +#192177 = EDGE_CURVE('',#192145,#192178,#192180,.T.); +#192178 = VERTEX_POINT('',#192179); +#192179 = CARTESIAN_POINT('',(145.128078,-109.230499,-3.5E-02)); +#192180 = LINE('',#192181,#192182); +#192181 = CARTESIAN_POINT('',(145.114805,-109.222836,-3.5E-02)); +#192182 = VECTOR('',#192183,1.); +#192183 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#192184 = ORIENTED_EDGE('',*,*,#192185,.F.); +#192185 = EDGE_CURVE('',#192186,#192178,#192188,.T.); +#192186 = VERTEX_POINT('',#192187); +#192187 = CARTESIAN_POINT('',(145.128078,-109.230499,0.)); +#192188 = LINE('',#192189,#192190); +#192189 = CARTESIAN_POINT('',(145.128078,-109.230499,0.)); +#192190 = VECTOR('',#192191,1.); +#192191 = DIRECTION('',(0.,0.,-1.)); +#192192 = ORIENTED_EDGE('',*,*,#192193,.F.); +#192193 = EDGE_CURVE('',#192154,#192186,#192194,.T.); +#192194 = LINE('',#192195,#192196); +#192195 = CARTESIAN_POINT('',(145.114805,-109.222836,0.)); +#192196 = VECTOR('',#192197,1.); +#192197 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#192198 = PLANE('',#192199); +#192199 = AXIS2_PLACEMENT_3D('',#192200,#192201,#192202); +#192200 = CARTESIAN_POINT('',(145.114805,-109.222836,0.)); +#192201 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#192202 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#192203 = ADVANCED_FACE('',(#192204),#192229,.F.); +#192204 = FACE_BOUND('',#192205,.F.); +#192205 = EDGE_LOOP('',(#192206,#192207,#192215,#192223)); +#192206 = ORIENTED_EDGE('',*,*,#192185,.T.); +#192207 = ORIENTED_EDGE('',*,*,#192208,.T.); +#192208 = EDGE_CURVE('',#192178,#192209,#192211,.T.); +#192209 = VERTEX_POINT('',#192210); +#192210 = CARTESIAN_POINT('',(148.,-106.358578,-3.5E-02)); +#192211 = LINE('',#192212,#192213); +#192212 = CARTESIAN_POINT('',(145.128078,-109.230499,-3.5E-02)); +#192213 = VECTOR('',#192214,1.); +#192214 = DIRECTION('',(0.707106904293,0.70710665808,0.)); +#192215 = ORIENTED_EDGE('',*,*,#192216,.F.); +#192216 = EDGE_CURVE('',#192217,#192209,#192219,.T.); +#192217 = VERTEX_POINT('',#192218); +#192218 = CARTESIAN_POINT('',(148.,-106.358578,0.)); +#192219 = LINE('',#192220,#192221); +#192220 = CARTESIAN_POINT('',(148.,-106.358578,0.)); +#192221 = VECTOR('',#192222,1.); +#192222 = DIRECTION('',(0.,0.,-1.)); +#192223 = ORIENTED_EDGE('',*,*,#192224,.F.); +#192224 = EDGE_CURVE('',#192186,#192217,#192225,.T.); +#192225 = LINE('',#192226,#192227); +#192226 = CARTESIAN_POINT('',(145.128078,-109.230499,0.)); +#192227 = VECTOR('',#192228,1.); +#192228 = DIRECTION('',(0.707106904293,0.70710665808,0.)); +#192229 = PLANE('',#192230); +#192230 = AXIS2_PLACEMENT_3D('',#192231,#192232,#192233); +#192231 = CARTESIAN_POINT('',(145.128078,-109.230499,0.)); +#192232 = DIRECTION('',(0.70710665808,-0.707106904293,0.)); +#192233 = DIRECTION('',(0.707106904293,0.70710665808,0.)); +#192234 = ADVANCED_FACE('',(#192235),#192260,.F.); +#192235 = FACE_BOUND('',#192236,.F.); +#192236 = EDGE_LOOP('',(#192237,#192238,#192246,#192254)); +#192237 = ORIENTED_EDGE('',*,*,#192216,.T.); +#192238 = ORIENTED_EDGE('',*,*,#192239,.T.); +#192239 = EDGE_CURVE('',#192209,#192240,#192242,.T.); +#192240 = VERTEX_POINT('',#192241); +#192241 = CARTESIAN_POINT('',(148.,-92.787588,-3.5E-02)); +#192242 = LINE('',#192243,#192244); +#192243 = CARTESIAN_POINT('',(148.,-106.358578,-3.5E-02)); +#192244 = VECTOR('',#192245,1.); +#192245 = DIRECTION('',(0.,1.,0.)); +#192246 = ORIENTED_EDGE('',*,*,#192247,.F.); +#192247 = EDGE_CURVE('',#192248,#192240,#192250,.T.); +#192248 = VERTEX_POINT('',#192249); +#192249 = CARTESIAN_POINT('',(148.,-92.787588,0.)); +#192250 = LINE('',#192251,#192252); +#192251 = CARTESIAN_POINT('',(148.,-92.787588,0.)); +#192252 = VECTOR('',#192253,1.); +#192253 = DIRECTION('',(0.,0.,-1.)); +#192254 = ORIENTED_EDGE('',*,*,#192255,.F.); +#192255 = EDGE_CURVE('',#192217,#192248,#192256,.T.); +#192256 = LINE('',#192257,#192258); +#192257 = CARTESIAN_POINT('',(148.,-106.358578,0.)); +#192258 = VECTOR('',#192259,1.); +#192259 = DIRECTION('',(0.,1.,0.)); +#192260 = PLANE('',#192261); +#192261 = AXIS2_PLACEMENT_3D('',#192262,#192263,#192264); +#192262 = CARTESIAN_POINT('',(148.,-106.358578,0.)); +#192263 = DIRECTION('',(1.,-0.,0.)); +#192264 = DIRECTION('',(0.,1.,0.)); +#192265 = ADVANCED_FACE('',(#192266),#192291,.F.); +#192266 = FACE_BOUND('',#192267,.F.); +#192267 = EDGE_LOOP('',(#192268,#192269,#192277,#192285)); +#192268 = ORIENTED_EDGE('',*,*,#192247,.T.); +#192269 = ORIENTED_EDGE('',*,*,#192270,.T.); +#192270 = EDGE_CURVE('',#192240,#192271,#192273,.T.); +#192271 = VERTEX_POINT('',#192272); +#192272 = CARTESIAN_POINT('',(145.416853,-90.201724,-3.5E-02)); +#192273 = LINE('',#192274,#192275); +#192274 = CARTESIAN_POINT('',(148.,-92.787588,-3.5E-02)); +#192275 = VECTOR('',#192276,1.); +#192276 = DIRECTION('',(-0.706735005274,0.707478361733,0.)); +#192277 = ORIENTED_EDGE('',*,*,#192278,.F.); +#192278 = EDGE_CURVE('',#192279,#192271,#192281,.T.); +#192279 = VERTEX_POINT('',#192280); +#192280 = CARTESIAN_POINT('',(145.416853,-90.201724,0.)); +#192281 = LINE('',#192282,#192283); +#192282 = CARTESIAN_POINT('',(145.416853,-90.201724,0.)); +#192283 = VECTOR('',#192284,1.); +#192284 = DIRECTION('',(0.,0.,-1.)); +#192285 = ORIENTED_EDGE('',*,*,#192286,.F.); +#192286 = EDGE_CURVE('',#192248,#192279,#192287,.T.); +#192287 = LINE('',#192288,#192289); +#192288 = CARTESIAN_POINT('',(148.,-92.787588,0.)); +#192289 = VECTOR('',#192290,1.); +#192290 = DIRECTION('',(-0.706735005274,0.707478361733,0.)); +#192291 = PLANE('',#192292); +#192292 = AXIS2_PLACEMENT_3D('',#192293,#192294,#192295); +#192293 = CARTESIAN_POINT('',(148.,-92.787588,0.)); +#192294 = DIRECTION('',(0.707478361733,0.706735005274,0.)); +#192295 = DIRECTION('',(-0.706735005274,0.707478361733,0.)); +#192296 = ADVANCED_FACE('',(#192297),#192322,.F.); +#192297 = FACE_BOUND('',#192298,.F.); +#192298 = EDGE_LOOP('',(#192299,#192300,#192308,#192316)); +#192299 = ORIENTED_EDGE('',*,*,#192278,.T.); +#192300 = ORIENTED_EDGE('',*,*,#192301,.T.); +#192301 = EDGE_CURVE('',#192271,#192302,#192304,.T.); +#192302 = VERTEX_POINT('',#192303); +#192303 = CARTESIAN_POINT('',(145.401921,-90.165676,-3.5E-02)); +#192304 = LINE('',#192305,#192306); +#192305 = CARTESIAN_POINT('',(145.416853,-90.201724,-3.5E-02)); +#192306 = VECTOR('',#192307,1.); +#192307 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#192308 = ORIENTED_EDGE('',*,*,#192309,.F.); +#192309 = EDGE_CURVE('',#192310,#192302,#192312,.T.); +#192310 = VERTEX_POINT('',#192311); +#192311 = CARTESIAN_POINT('',(145.401921,-90.165676,0.)); +#192312 = LINE('',#192313,#192314); +#192313 = CARTESIAN_POINT('',(145.401921,-90.165676,0.)); +#192314 = VECTOR('',#192315,1.); +#192315 = DIRECTION('',(0.,0.,-1.)); +#192316 = ORIENTED_EDGE('',*,*,#192317,.F.); +#192317 = EDGE_CURVE('',#192279,#192310,#192318,.T.); +#192318 = LINE('',#192319,#192320); +#192319 = CARTESIAN_POINT('',(145.416853,-90.201724,0.)); +#192320 = VECTOR('',#192321,1.); +#192321 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#192322 = PLANE('',#192323); +#192323 = AXIS2_PLACEMENT_3D('',#192324,#192325,#192326); +#192324 = CARTESIAN_POINT('',(145.416853,-90.201724,0.)); +#192325 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#192326 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#192327 = ADVANCED_FACE('',(#192328),#192353,.F.); +#192328 = FACE_BOUND('',#192329,.F.); +#192329 = EDGE_LOOP('',(#192330,#192331,#192339,#192347)); +#192330 = ORIENTED_EDGE('',*,*,#192309,.T.); +#192331 = ORIENTED_EDGE('',*,*,#192332,.T.); +#192332 = EDGE_CURVE('',#192302,#192333,#192335,.T.); +#192333 = VERTEX_POINT('',#192334); +#192334 = CARTESIAN_POINT('',(145.4,-80.78113,-3.5E-02)); +#192335 = LINE('',#192336,#192337); +#192336 = CARTESIAN_POINT('',(145.401921,-90.165676,-3.5E-02)); +#192337 = VECTOR('',#192338,1.); +#192338 = DIRECTION('',(-2.046982304456E-04,0.999999979049,0.)); +#192339 = ORIENTED_EDGE('',*,*,#192340,.F.); +#192340 = EDGE_CURVE('',#192341,#192333,#192343,.T.); +#192341 = VERTEX_POINT('',#192342); +#192342 = CARTESIAN_POINT('',(145.4,-80.78113,0.)); +#192343 = LINE('',#192344,#192345); +#192344 = CARTESIAN_POINT('',(145.4,-80.78113,0.)); +#192345 = VECTOR('',#192346,1.); +#192346 = DIRECTION('',(0.,0.,-1.)); +#192347 = ORIENTED_EDGE('',*,*,#192348,.F.); +#192348 = EDGE_CURVE('',#192310,#192341,#192349,.T.); +#192349 = LINE('',#192350,#192351); +#192350 = CARTESIAN_POINT('',(145.401921,-90.165676,0.)); +#192351 = VECTOR('',#192352,1.); +#192352 = DIRECTION('',(-2.046982304456E-04,0.999999979049,0.)); +#192353 = PLANE('',#192354); +#192354 = AXIS2_PLACEMENT_3D('',#192355,#192356,#192357); +#192355 = CARTESIAN_POINT('',(145.401921,-90.165676,0.)); +#192356 = DIRECTION('',(0.999999979049,2.046982304456E-04,0.)); +#192357 = DIRECTION('',(-2.046982304456E-04,0.999999979049,0.)); +#192358 = ADVANCED_FACE('',(#192359),#192384,.F.); +#192359 = FACE_BOUND('',#192360,.F.); +#192360 = EDGE_LOOP('',(#192361,#192362,#192370,#192378)); +#192361 = ORIENTED_EDGE('',*,*,#192340,.T.); +#192362 = ORIENTED_EDGE('',*,*,#192363,.T.); +#192363 = EDGE_CURVE('',#192333,#192364,#192366,.T.); +#192364 = VERTEX_POINT('',#192365); +#192365 = CARTESIAN_POINT('',(145.385195,-80.777164,-3.5E-02)); +#192366 = LINE('',#192367,#192368); +#192367 = CARTESIAN_POINT('',(145.4,-80.78113,-3.5E-02)); +#192368 = VECTOR('',#192369,1.); +#192369 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#192370 = ORIENTED_EDGE('',*,*,#192371,.F.); +#192371 = EDGE_CURVE('',#192372,#192364,#192374,.T.); +#192372 = VERTEX_POINT('',#192373); +#192373 = CARTESIAN_POINT('',(145.385195,-80.777164,0.)); +#192374 = LINE('',#192375,#192376); +#192375 = CARTESIAN_POINT('',(145.385195,-80.777164,0.)); +#192376 = VECTOR('',#192377,1.); +#192377 = DIRECTION('',(0.,0.,-1.)); +#192378 = ORIENTED_EDGE('',*,*,#192379,.F.); +#192379 = EDGE_CURVE('',#192341,#192372,#192380,.T.); +#192380 = LINE('',#192381,#192382); +#192381 = CARTESIAN_POINT('',(145.4,-80.78113,0.)); +#192382 = VECTOR('',#192383,1.); +#192383 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#192384 = PLANE('',#192385); +#192385 = AXIS2_PLACEMENT_3D('',#192386,#192387,#192388); +#192386 = CARTESIAN_POINT('',(145.4,-80.78113,0.)); +#192387 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#192388 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#192389 = ADVANCED_FACE('',(#192390),#192417,.T.); +#192390 = FACE_BOUND('',#192391,.F.); +#192391 = EDGE_LOOP('',(#192392,#192393,#192402,#192410)); +#192392 = ORIENTED_EDGE('',*,*,#192371,.T.); +#192393 = ORIENTED_EDGE('',*,*,#192394,.T.); +#192394 = EDGE_CURVE('',#192364,#192395,#192397,.T.); +#192395 = VERTEX_POINT('',#192396); +#192396 = CARTESIAN_POINT('',(145.614805,-80.777164,-3.5E-02)); +#192397 = CIRCLE('',#192398,0.299999472923); +#192398 = AXIS2_PLACEMENT_3D('',#192399,#192400,#192401); +#192399 = CARTESIAN_POINT('',(145.5,-80.50000069844,-3.5E-02)); +#192400 = DIRECTION('',(0.,0.,-1.)); +#192401 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#192402 = ORIENTED_EDGE('',*,*,#192403,.F.); +#192403 = EDGE_CURVE('',#192404,#192395,#192406,.T.); +#192404 = VERTEX_POINT('',#192405); +#192405 = CARTESIAN_POINT('',(145.614805,-80.777164,0.)); +#192406 = LINE('',#192407,#192408); +#192407 = CARTESIAN_POINT('',(145.614805,-80.777164,0.)); +#192408 = VECTOR('',#192409,1.); +#192409 = DIRECTION('',(0.,0.,-1.)); +#192410 = ORIENTED_EDGE('',*,*,#192411,.F.); +#192411 = EDGE_CURVE('',#192372,#192404,#192412,.T.); +#192412 = CIRCLE('',#192413,0.299999472923); +#192413 = AXIS2_PLACEMENT_3D('',#192414,#192415,#192416); +#192414 = CARTESIAN_POINT('',(145.5,-80.50000069844,0.)); +#192415 = DIRECTION('',(0.,0.,-1.)); +#192416 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#192417 = CYLINDRICAL_SURFACE('',#192418,0.299999472923); +#192418 = AXIS2_PLACEMENT_3D('',#192419,#192420,#192421); +#192419 = CARTESIAN_POINT('',(145.5,-80.50000069844,0.)); +#192420 = DIRECTION('',(-0.,-0.,1.)); +#192421 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#192422 = ADVANCED_FACE('',(#192423),#192439,.F.); +#192423 = FACE_BOUND('',#192424,.F.); +#192424 = EDGE_LOOP('',(#192425,#192426,#192432,#192433)); +#192425 = ORIENTED_EDGE('',*,*,#192403,.T.); +#192426 = ORIENTED_EDGE('',*,*,#192427,.T.); +#192427 = EDGE_CURVE('',#192395,#191920,#192428,.T.); +#192428 = LINE('',#192429,#192430); +#192429 = CARTESIAN_POINT('',(145.614805,-80.777164,-3.5E-02)); +#192430 = VECTOR('',#192431,1.); +#192431 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#192432 = ORIENTED_EDGE('',*,*,#191917,.F.); +#192433 = ORIENTED_EDGE('',*,*,#192434,.F.); +#192434 = EDGE_CURVE('',#192404,#191918,#192435,.T.); +#192435 = LINE('',#192436,#192437); +#192436 = CARTESIAN_POINT('',(145.614805,-80.777164,0.)); +#192437 = VECTOR('',#192438,1.); +#192438 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#192439 = PLANE('',#192440); +#192440 = AXIS2_PLACEMENT_3D('',#192441,#192442,#192443); +#192441 = CARTESIAN_POINT('',(145.614805,-80.777164,0.)); +#192442 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#192443 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#192444 = ADVANCED_FACE('',(#192445),#192472,.F.); +#192445 = FACE_BOUND('',#192446,.F.); +#192446 = EDGE_LOOP('',(#192447,#192457,#192464,#192465)); +#192447 = ORIENTED_EDGE('',*,*,#192448,.T.); +#192448 = EDGE_CURVE('',#192449,#192451,#192453,.T.); +#192449 = VERTEX_POINT('',#192450); +#192450 = CARTESIAN_POINT('',(145.137255,-109.5,0.)); +#192451 = VERTEX_POINT('',#192452); +#192452 = CARTESIAN_POINT('',(145.137255,-109.5,-3.5E-02)); +#192453 = LINE('',#192454,#192455); +#192454 = CARTESIAN_POINT('',(145.137255,-109.5,0.)); +#192455 = VECTOR('',#192456,1.); +#192456 = DIRECTION('',(0.,0.,-1.)); +#192457 = ORIENTED_EDGE('',*,*,#192458,.T.); +#192458 = EDGE_CURVE('',#192451,#192451,#192459,.T.); +#192459 = CIRCLE('',#192460,0.137255); +#192460 = AXIS2_PLACEMENT_3D('',#192461,#192462,#192463); +#192461 = CARTESIAN_POINT('',(145.,-109.5,-3.5E-02)); +#192462 = DIRECTION('',(0.,0.,1.)); +#192463 = DIRECTION('',(1.,0.,-0.)); +#192464 = ORIENTED_EDGE('',*,*,#192448,.F.); +#192465 = ORIENTED_EDGE('',*,*,#192466,.F.); +#192466 = EDGE_CURVE('',#192449,#192449,#192467,.T.); +#192467 = CIRCLE('',#192468,0.137255); +#192468 = AXIS2_PLACEMENT_3D('',#192469,#192470,#192471); +#192469 = CARTESIAN_POINT('',(145.,-109.5,0.)); +#192470 = DIRECTION('',(0.,0.,1.)); +#192471 = DIRECTION('',(1.,0.,-0.)); +#192472 = CYLINDRICAL_SURFACE('',#192473,0.137255); +#192473 = AXIS2_PLACEMENT_3D('',#192474,#192475,#192476); +#192474 = CARTESIAN_POINT('',(145.,-109.5,0.)); +#192475 = DIRECTION('',(0.,0.,1.)); +#192476 = DIRECTION('',(1.,0.,-0.)); +#192477 = ADVANCED_FACE('',(#192478),#192505,.F.); +#192478 = FACE_BOUND('',#192479,.F.); +#192479 = EDGE_LOOP('',(#192480,#192490,#192497,#192498)); +#192480 = ORIENTED_EDGE('',*,*,#192481,.T.); +#192481 = EDGE_CURVE('',#192482,#192484,#192486,.T.); +#192482 = VERTEX_POINT('',#192483); +#192483 = CARTESIAN_POINT('',(145.637255,-80.5,0.)); +#192484 = VERTEX_POINT('',#192485); +#192485 = CARTESIAN_POINT('',(145.637255,-80.5,-3.5E-02)); +#192486 = LINE('',#192487,#192488); +#192487 = CARTESIAN_POINT('',(145.637255,-80.5,0.)); +#192488 = VECTOR('',#192489,1.); +#192489 = DIRECTION('',(0.,0.,-1.)); +#192490 = ORIENTED_EDGE('',*,*,#192491,.T.); +#192491 = EDGE_CURVE('',#192484,#192484,#192492,.T.); +#192492 = CIRCLE('',#192493,0.137255); +#192493 = AXIS2_PLACEMENT_3D('',#192494,#192495,#192496); +#192494 = CARTESIAN_POINT('',(145.5,-80.5,-3.5E-02)); +#192495 = DIRECTION('',(0.,0.,1.)); +#192496 = DIRECTION('',(1.,0.,-0.)); +#192497 = ORIENTED_EDGE('',*,*,#192481,.F.); +#192498 = ORIENTED_EDGE('',*,*,#192499,.F.); +#192499 = EDGE_CURVE('',#192482,#192482,#192500,.T.); +#192500 = CIRCLE('',#192501,0.137255); +#192501 = AXIS2_PLACEMENT_3D('',#192502,#192503,#192504); +#192502 = CARTESIAN_POINT('',(145.5,-80.5,0.)); +#192503 = DIRECTION('',(0.,0.,1.)); +#192504 = DIRECTION('',(1.,0.,-0.)); +#192505 = CYLINDRICAL_SURFACE('',#192506,0.137255); +#192506 = AXIS2_PLACEMENT_3D('',#192507,#192508,#192509); +#192507 = CARTESIAN_POINT('',(145.5,-80.5,0.)); +#192508 = DIRECTION('',(0.,0.,1.)); +#192509 = DIRECTION('',(1.,0.,-0.)); +#192510 = ADVANCED_FACE('',(#192511,#192530,#192533),#192536,.F.); +#192511 = FACE_BOUND('',#192512,.F.); +#192512 = EDGE_LOOP('',(#192513,#192514,#192515,#192516,#192517,#192518, + #192519,#192520,#192521,#192522,#192523,#192524,#192525,#192526, + #192527,#192528,#192529)); +#192513 = ORIENTED_EDGE('',*,*,#191943,.T.); +#192514 = ORIENTED_EDGE('',*,*,#191974,.T.); +#192515 = ORIENTED_EDGE('',*,*,#192005,.T.); +#192516 = ORIENTED_EDGE('',*,*,#192036,.T.); +#192517 = ORIENTED_EDGE('',*,*,#192067,.T.); +#192518 = ORIENTED_EDGE('',*,*,#192098,.T.); +#192519 = ORIENTED_EDGE('',*,*,#192129,.T.); +#192520 = ORIENTED_EDGE('',*,*,#192161,.T.); +#192521 = ORIENTED_EDGE('',*,*,#192193,.T.); +#192522 = ORIENTED_EDGE('',*,*,#192224,.T.); +#192523 = ORIENTED_EDGE('',*,*,#192255,.T.); +#192524 = ORIENTED_EDGE('',*,*,#192286,.T.); +#192525 = ORIENTED_EDGE('',*,*,#192317,.T.); +#192526 = ORIENTED_EDGE('',*,*,#192348,.T.); +#192527 = ORIENTED_EDGE('',*,*,#192379,.T.); +#192528 = ORIENTED_EDGE('',*,*,#192411,.T.); +#192529 = ORIENTED_EDGE('',*,*,#192434,.T.); +#192530 = FACE_BOUND('',#192531,.F.); +#192531 = EDGE_LOOP('',(#192532)); +#192532 = ORIENTED_EDGE('',*,*,#192466,.T.); +#192533 = FACE_BOUND('',#192534,.F.); +#192534 = EDGE_LOOP('',(#192535)); +#192535 = ORIENTED_EDGE('',*,*,#192499,.T.); +#192536 = PLANE('',#192537); +#192537 = AXIS2_PLACEMENT_3D('',#192538,#192539,#192540); +#192538 = CARTESIAN_POINT('',(0.,0.,0.)); +#192539 = DIRECTION('',(-0.,-0.,-1.)); +#192540 = DIRECTION('',(-1.,0.,0.)); +#192541 = ADVANCED_FACE('',(#192542,#192561,#192564),#192567,.T.); +#192542 = FACE_BOUND('',#192543,.T.); +#192543 = EDGE_LOOP('',(#192544,#192545,#192546,#192547,#192548,#192549, + #192550,#192551,#192552,#192553,#192554,#192555,#192556,#192557, + #192558,#192559,#192560)); +#192544 = ORIENTED_EDGE('',*,*,#191927,.T.); +#192545 = ORIENTED_EDGE('',*,*,#191958,.T.); +#192546 = ORIENTED_EDGE('',*,*,#191989,.T.); +#192547 = ORIENTED_EDGE('',*,*,#192020,.T.); +#192548 = ORIENTED_EDGE('',*,*,#192051,.T.); +#192549 = ORIENTED_EDGE('',*,*,#192082,.T.); +#192550 = ORIENTED_EDGE('',*,*,#192113,.T.); +#192551 = ORIENTED_EDGE('',*,*,#192144,.T.); +#192552 = ORIENTED_EDGE('',*,*,#192177,.T.); +#192553 = ORIENTED_EDGE('',*,*,#192208,.T.); +#192554 = ORIENTED_EDGE('',*,*,#192239,.T.); +#192555 = ORIENTED_EDGE('',*,*,#192270,.T.); +#192556 = ORIENTED_EDGE('',*,*,#192301,.T.); +#192557 = ORIENTED_EDGE('',*,*,#192332,.T.); +#192558 = ORIENTED_EDGE('',*,*,#192363,.T.); +#192559 = ORIENTED_EDGE('',*,*,#192394,.T.); +#192560 = ORIENTED_EDGE('',*,*,#192427,.T.); +#192561 = FACE_BOUND('',#192562,.T.); +#192562 = EDGE_LOOP('',(#192563)); +#192563 = ORIENTED_EDGE('',*,*,#192458,.T.); +#192564 = FACE_BOUND('',#192565,.T.); +#192565 = EDGE_LOOP('',(#192566)); +#192566 = ORIENTED_EDGE('',*,*,#192491,.T.); +#192567 = PLANE('',#192568); +#192568 = AXIS2_PLACEMENT_3D('',#192569,#192570,#192571); +#192569 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#192570 = DIRECTION('',(-0.,-0.,-1.)); +#192571 = DIRECTION('',(-1.,0.,0.)); +#192572 = MANIFOLD_SOLID_BREP('',#192573); +#192573 = CLOSED_SHELL('',(#192574,#192614,#192647,#192678,#192709, + #192742,#192764,#192797,#192814)); +#192574 = ADVANCED_FACE('',(#192575),#192609,.T.); +#192575 = FACE_BOUND('',#192576,.T.); +#192576 = EDGE_LOOP('',(#192577,#192587,#192595,#192603)); +#192577 = ORIENTED_EDGE('',*,*,#192578,.T.); +#192578 = EDGE_CURVE('',#192579,#192581,#192583,.T.); +#192579 = VERTEX_POINT('',#192580); +#192580 = CARTESIAN_POINT('',(128.87192,-116.7695,1.51)); +#192581 = VERTEX_POINT('',#192582); +#192582 = CARTESIAN_POINT('',(128.87192,-116.7695,1.545)); +#192583 = LINE('',#192584,#192585); +#192584 = CARTESIAN_POINT('',(128.87192,-116.7695,1.51)); +#192585 = VECTOR('',#192586,1.); +#192586 = DIRECTION('',(0.,0.,1.)); +#192587 = ORIENTED_EDGE('',*,*,#192588,.T.); +#192588 = EDGE_CURVE('',#192581,#192589,#192591,.T.); +#192589 = VERTEX_POINT('',#192590); +#192590 = CARTESIAN_POINT('',(124.305557,-121.333147,1.545)); +#192591 = LINE('',#192592,#192593); +#192592 = CARTESIAN_POINT('',(128.87192,-116.7695,1.545)); +#192593 = VECTOR('',#192594,1.); +#192594 = DIRECTION('',(-0.707317100373,-0.706896399425,0.)); +#192595 = ORIENTED_EDGE('',*,*,#192596,.F.); +#192596 = EDGE_CURVE('',#192597,#192589,#192599,.T.); +#192597 = VERTEX_POINT('',#192598); +#192598 = CARTESIAN_POINT('',(124.305557,-121.333147,1.51)); +#192599 = LINE('',#192600,#192601); +#192600 = CARTESIAN_POINT('',(124.305557,-121.333147,1.51)); +#192601 = VECTOR('',#192602,1.); +#192602 = DIRECTION('',(0.,0.,1.)); +#192603 = ORIENTED_EDGE('',*,*,#192604,.F.); +#192604 = EDGE_CURVE('',#192579,#192597,#192605,.T.); +#192605 = LINE('',#192606,#192607); +#192606 = CARTESIAN_POINT('',(128.87192,-116.7695,1.51)); +#192607 = VECTOR('',#192608,1.); +#192608 = DIRECTION('',(-0.707317100373,-0.706896399425,0.)); +#192609 = PLANE('',#192610); +#192610 = AXIS2_PLACEMENT_3D('',#192611,#192612,#192613); +#192611 = CARTESIAN_POINT('',(128.87192,-116.7695,1.51)); +#192612 = DIRECTION('',(0.706896399425,-0.707317100373,0.)); +#192613 = DIRECTION('',(-0.707317100373,-0.706896399425,0.)); +#192614 = ADVANCED_FACE('',(#192615),#192642,.T.); +#192615 = FACE_BOUND('',#192616,.T.); +#192616 = EDGE_LOOP('',(#192617,#192618,#192627,#192635)); +#192617 = ORIENTED_EDGE('',*,*,#192596,.T.); +#192618 = ORIENTED_EDGE('',*,*,#192619,.T.); +#192619 = EDGE_CURVE('',#192589,#192620,#192622,.T.); +#192620 = VERTEX_POINT('',#192621); +#192621 = CARTESIAN_POINT('',(124.166853,-121.194443,1.545)); +#192622 = CIRCLE('',#192623,0.10000001929); +#192623 = AXIS2_PLACEMENT_3D('',#192624,#192625,#192626); +#192624 = CARTESIAN_POINT('',(124.25,-121.25,1.545)); +#192625 = DIRECTION('',(0.,0.,-1.)); +#192626 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#192627 = ORIENTED_EDGE('',*,*,#192628,.F.); +#192628 = EDGE_CURVE('',#192629,#192620,#192631,.T.); +#192629 = VERTEX_POINT('',#192630); +#192630 = CARTESIAN_POINT('',(124.166853,-121.194443,1.51)); +#192631 = LINE('',#192632,#192633); +#192632 = CARTESIAN_POINT('',(124.166853,-121.194443,1.51)); +#192633 = VECTOR('',#192634,1.); +#192634 = DIRECTION('',(0.,0.,1.)); +#192635 = ORIENTED_EDGE('',*,*,#192636,.F.); +#192636 = EDGE_CURVE('',#192597,#192629,#192637,.T.); +#192637 = CIRCLE('',#192638,0.10000001929); +#192638 = AXIS2_PLACEMENT_3D('',#192639,#192640,#192641); +#192639 = CARTESIAN_POINT('',(124.25,-121.25,1.51)); +#192640 = DIRECTION('',(0.,0.,-1.)); +#192641 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#192642 = CYLINDRICAL_SURFACE('',#192643,0.10000001929); +#192643 = AXIS2_PLACEMENT_3D('',#192644,#192645,#192646); +#192644 = CARTESIAN_POINT('',(124.25,-121.25,1.51)); +#192645 = DIRECTION('',(0.,0.,-1.)); +#192646 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#192647 = ADVANCED_FACE('',(#192648),#192673,.T.); +#192648 = FACE_BOUND('',#192649,.T.); +#192649 = EDGE_LOOP('',(#192650,#192651,#192659,#192667)); +#192650 = ORIENTED_EDGE('',*,*,#192628,.T.); +#192651 = ORIENTED_EDGE('',*,*,#192652,.T.); +#192652 = EDGE_CURVE('',#192620,#192653,#192655,.T.); +#192653 = VERTEX_POINT('',#192654); +#192654 = CARTESIAN_POINT('',(128.730499,-116.628079,1.545)); +#192655 = LINE('',#192656,#192657); +#192656 = CARTESIAN_POINT('',(124.166853,-121.194443,1.545)); +#192657 = VECTOR('',#192658,1.); +#192658 = DIRECTION('',(0.706896244481,0.707317255224,0.)); +#192659 = ORIENTED_EDGE('',*,*,#192660,.F.); +#192660 = EDGE_CURVE('',#192661,#192653,#192663,.T.); +#192661 = VERTEX_POINT('',#192662); +#192662 = CARTESIAN_POINT('',(128.730499,-116.628079,1.51)); +#192663 = LINE('',#192664,#192665); +#192664 = CARTESIAN_POINT('',(128.730499,-116.628079,1.51)); +#192665 = VECTOR('',#192666,1.); +#192666 = DIRECTION('',(0.,0.,1.)); +#192667 = ORIENTED_EDGE('',*,*,#192668,.F.); +#192668 = EDGE_CURVE('',#192629,#192661,#192669,.T.); +#192669 = LINE('',#192670,#192671); +#192670 = CARTESIAN_POINT('',(124.166853,-121.194443,1.51)); +#192671 = VECTOR('',#192672,1.); +#192672 = DIRECTION('',(0.706896244481,0.707317255224,0.)); +#192673 = PLANE('',#192674); +#192674 = AXIS2_PLACEMENT_3D('',#192675,#192676,#192677); +#192675 = CARTESIAN_POINT('',(124.166853,-121.194443,1.51)); +#192676 = DIRECTION('',(-0.707317255224,0.706896244481,0.)); +#192677 = DIRECTION('',(0.706896244481,0.707317255224,0.)); +#192678 = ADVANCED_FACE('',(#192679),#192704,.T.); +#192679 = FACE_BOUND('',#192680,.T.); +#192680 = EDGE_LOOP('',(#192681,#192682,#192690,#192698)); +#192681 = ORIENTED_EDGE('',*,*,#192660,.T.); +#192682 = ORIENTED_EDGE('',*,*,#192683,.T.); +#192683 = EDGE_CURVE('',#192653,#192684,#192686,.T.); +#192684 = VERTEX_POINT('',#192685); +#192685 = CARTESIAN_POINT('',(128.722836,-116.614805,1.545)); +#192686 = LINE('',#192687,#192688); +#192687 = CARTESIAN_POINT('',(128.730499,-116.628079,1.545)); +#192688 = VECTOR('',#192689,1.); +#192689 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#192690 = ORIENTED_EDGE('',*,*,#192691,.F.); +#192691 = EDGE_CURVE('',#192692,#192684,#192694,.T.); +#192692 = VERTEX_POINT('',#192693); +#192693 = CARTESIAN_POINT('',(128.722836,-116.614805,1.51)); +#192694 = LINE('',#192695,#192696); +#192695 = CARTESIAN_POINT('',(128.722836,-116.614805,1.51)); +#192696 = VECTOR('',#192697,1.); +#192697 = DIRECTION('',(0.,0.,1.)); +#192698 = ORIENTED_EDGE('',*,*,#192699,.F.); +#192699 = EDGE_CURVE('',#192661,#192692,#192700,.T.); +#192700 = LINE('',#192701,#192702); +#192701 = CARTESIAN_POINT('',(128.730499,-116.628079,1.51)); +#192702 = VECTOR('',#192703,1.); +#192703 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#192704 = PLANE('',#192705); +#192705 = AXIS2_PLACEMENT_3D('',#192706,#192707,#192708); +#192706 = CARTESIAN_POINT('',(128.730499,-116.628079,1.51)); +#192707 = DIRECTION('',(-0.86604652018,-0.499963423546,0.)); +#192708 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#192709 = ADVANCED_FACE('',(#192710),#192737,.T.); +#192710 = FACE_BOUND('',#192711,.T.); +#192711 = EDGE_LOOP('',(#192712,#192713,#192722,#192730)); +#192712 = ORIENTED_EDGE('',*,*,#192691,.T.); +#192713 = ORIENTED_EDGE('',*,*,#192714,.T.); +#192714 = EDGE_CURVE('',#192684,#192715,#192717,.T.); +#192715 = VERTEX_POINT('',#192716); +#192716 = CARTESIAN_POINT('',(128.885195,-116.777164,1.545)); +#192717 = CIRCLE('',#192718,0.300000118202); +#192718 = AXIS2_PLACEMENT_3D('',#192719,#192720,#192721); +#192719 = CARTESIAN_POINT('',(129.,-116.5,1.545)); +#192720 = DIRECTION('',(0.,0.,-1.)); +#192721 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#192722 = ORIENTED_EDGE('',*,*,#192723,.F.); +#192723 = EDGE_CURVE('',#192724,#192715,#192726,.T.); +#192724 = VERTEX_POINT('',#192725); +#192725 = CARTESIAN_POINT('',(128.885195,-116.777164,1.51)); +#192726 = LINE('',#192727,#192728); +#192727 = CARTESIAN_POINT('',(128.885195,-116.777164,1.51)); +#192728 = VECTOR('',#192729,1.); +#192729 = DIRECTION('',(0.,0.,1.)); +#192730 = ORIENTED_EDGE('',*,*,#192731,.F.); +#192731 = EDGE_CURVE('',#192692,#192724,#192732,.T.); +#192732 = CIRCLE('',#192733,0.300000118202); +#192733 = AXIS2_PLACEMENT_3D('',#192734,#192735,#192736); +#192734 = CARTESIAN_POINT('',(129.,-116.5,1.51)); +#192735 = DIRECTION('',(0.,0.,-1.)); +#192736 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#192737 = CYLINDRICAL_SURFACE('',#192738,0.300000118202); +#192738 = AXIS2_PLACEMENT_3D('',#192739,#192740,#192741); +#192739 = CARTESIAN_POINT('',(129.,-116.5,1.51)); +#192740 = DIRECTION('',(0.,0.,-1.)); +#192741 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#192742 = ADVANCED_FACE('',(#192743),#192759,.T.); +#192743 = FACE_BOUND('',#192744,.T.); +#192744 = EDGE_LOOP('',(#192745,#192746,#192752,#192753)); +#192745 = ORIENTED_EDGE('',*,*,#192723,.T.); +#192746 = ORIENTED_EDGE('',*,*,#192747,.T.); +#192747 = EDGE_CURVE('',#192715,#192581,#192748,.T.); +#192748 = LINE('',#192749,#192750); +#192749 = CARTESIAN_POINT('',(128.885195,-116.777164,1.545)); +#192750 = VECTOR('',#192751,1.); +#192751 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#192752 = ORIENTED_EDGE('',*,*,#192578,.F.); +#192753 = ORIENTED_EDGE('',*,*,#192754,.F.); +#192754 = EDGE_CURVE('',#192724,#192579,#192755,.T.); +#192755 = LINE('',#192756,#192757); +#192756 = CARTESIAN_POINT('',(128.885195,-116.777164,1.51)); +#192757 = VECTOR('',#192758,1.); +#192758 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#192759 = PLANE('',#192760); +#192760 = AXIS2_PLACEMENT_3D('',#192761,#192762,#192763); +#192761 = CARTESIAN_POINT('',(128.885195,-116.777164,1.51)); +#192762 = DIRECTION('',(-0.499984106787,-0.866034579541,0.)); +#192763 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#192764 = ADVANCED_FACE('',(#192765),#192792,.F.); +#192765 = FACE_BOUND('',#192766,.T.); +#192766 = EDGE_LOOP('',(#192767,#192777,#192784,#192785)); +#192767 = ORIENTED_EDGE('',*,*,#192768,.T.); +#192768 = EDGE_CURVE('',#192769,#192771,#192773,.T.); +#192769 = VERTEX_POINT('',#192770); +#192770 = CARTESIAN_POINT('',(129.137255,-116.5,1.51)); +#192771 = VERTEX_POINT('',#192772); +#192772 = CARTESIAN_POINT('',(129.137255,-116.5,1.545)); +#192773 = LINE('',#192774,#192775); +#192774 = CARTESIAN_POINT('',(129.137255,-116.5,1.51)); +#192775 = VECTOR('',#192776,1.); +#192776 = DIRECTION('',(0.,0.,1.)); +#192777 = ORIENTED_EDGE('',*,*,#192778,.T.); +#192778 = EDGE_CURVE('',#192771,#192771,#192779,.T.); +#192779 = CIRCLE('',#192780,0.137255); +#192780 = AXIS2_PLACEMENT_3D('',#192781,#192782,#192783); +#192781 = CARTESIAN_POINT('',(129.,-116.5,1.545)); +#192782 = DIRECTION('',(0.,0.,1.)); +#192783 = DIRECTION('',(1.,0.,-0.)); +#192784 = ORIENTED_EDGE('',*,*,#192768,.F.); +#192785 = ORIENTED_EDGE('',*,*,#192786,.F.); +#192786 = EDGE_CURVE('',#192769,#192769,#192787,.T.); +#192787 = CIRCLE('',#192788,0.137255); +#192788 = AXIS2_PLACEMENT_3D('',#192789,#192790,#192791); +#192789 = CARTESIAN_POINT('',(129.,-116.5,1.51)); +#192790 = DIRECTION('',(0.,0.,1.)); +#192791 = DIRECTION('',(1.,0.,-0.)); +#192792 = CYLINDRICAL_SURFACE('',#192793,0.137255); +#192793 = AXIS2_PLACEMENT_3D('',#192794,#192795,#192796); +#192794 = CARTESIAN_POINT('',(129.,-116.5,1.51)); +#192795 = DIRECTION('',(-0.,-0.,-1.)); +#192796 = DIRECTION('',(1.,0.,-0.)); +#192797 = ADVANCED_FACE('',(#192798,#192806),#192809,.F.); +#192798 = FACE_BOUND('',#192799,.T.); +#192799 = EDGE_LOOP('',(#192800,#192801,#192802,#192803,#192804,#192805) + ); +#192800 = ORIENTED_EDGE('',*,*,#192604,.T.); +#192801 = ORIENTED_EDGE('',*,*,#192636,.T.); +#192802 = ORIENTED_EDGE('',*,*,#192668,.T.); +#192803 = ORIENTED_EDGE('',*,*,#192699,.T.); +#192804 = ORIENTED_EDGE('',*,*,#192731,.T.); +#192805 = ORIENTED_EDGE('',*,*,#192754,.T.); +#192806 = FACE_BOUND('',#192807,.T.); +#192807 = EDGE_LOOP('',(#192808)); +#192808 = ORIENTED_EDGE('',*,*,#192786,.T.); +#192809 = PLANE('',#192810); +#192810 = AXIS2_PLACEMENT_3D('',#192811,#192812,#192813); +#192811 = CARTESIAN_POINT('',(0.,0.,1.51)); +#192812 = DIRECTION('',(0.,0.,1.)); +#192813 = DIRECTION('',(1.,0.,-0.)); +#192814 = ADVANCED_FACE('',(#192815,#192823),#192826,.T.); +#192815 = FACE_BOUND('',#192816,.F.); +#192816 = EDGE_LOOP('',(#192817,#192818,#192819,#192820,#192821,#192822) + ); +#192817 = ORIENTED_EDGE('',*,*,#192588,.T.); +#192818 = ORIENTED_EDGE('',*,*,#192619,.T.); +#192819 = ORIENTED_EDGE('',*,*,#192652,.T.); +#192820 = ORIENTED_EDGE('',*,*,#192683,.T.); +#192821 = ORIENTED_EDGE('',*,*,#192714,.T.); +#192822 = ORIENTED_EDGE('',*,*,#192747,.T.); +#192823 = FACE_BOUND('',#192824,.F.); +#192824 = EDGE_LOOP('',(#192825)); +#192825 = ORIENTED_EDGE('',*,*,#192778,.T.); +#192826 = PLANE('',#192827); +#192827 = AXIS2_PLACEMENT_3D('',#192828,#192829,#192830); +#192828 = CARTESIAN_POINT('',(0.,0.,1.545)); +#192829 = DIRECTION('',(0.,0.,1.)); +#192830 = DIRECTION('',(1.,0.,-0.)); +#192831 = MANIFOLD_SOLID_BREP('',#192832); +#192832 = CLOSED_SHELL('',(#192833,#192873,#192904,#192937,#192968, + #192999,#193030,#193063,#193094,#193116,#193149,#193169)); +#192833 = ADVANCED_FACE('',(#192834),#192868,.T.); +#192834 = FACE_BOUND('',#192835,.T.); +#192835 = EDGE_LOOP('',(#192836,#192846,#192854,#192862)); +#192836 = ORIENTED_EDGE('',*,*,#192837,.T.); +#192837 = EDGE_CURVE('',#192838,#192840,#192842,.T.); +#192838 = VERTEX_POINT('',#192839); +#192839 = CARTESIAN_POINT('',(146.193068,-78.536853,1.51)); +#192840 = VERTEX_POINT('',#192841); +#192841 = CARTESIAN_POINT('',(146.193068,-78.536853,1.545)); +#192842 = LINE('',#192843,#192844); +#192843 = CARTESIAN_POINT('',(146.193068,-78.536853,1.51)); +#192844 = VECTOR('',#192845,1.); +#192845 = DIRECTION('',(0.,0.,1.)); +#192846 = ORIENTED_EDGE('',*,*,#192847,.T.); +#192847 = EDGE_CURVE('',#192840,#192848,#192850,.T.); +#192848 = VERTEX_POINT('',#192849); +#192849 = CARTESIAN_POINT('',(146.229117,-78.521921,1.545)); +#192850 = LINE('',#192851,#192852); +#192851 = CARTESIAN_POINT('',(146.193068,-78.536853,1.545)); +#192852 = VECTOR('',#192853,1.); +#192853 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#192854 = ORIENTED_EDGE('',*,*,#192855,.F.); +#192855 = EDGE_CURVE('',#192856,#192848,#192858,.T.); +#192856 = VERTEX_POINT('',#192857); +#192857 = CARTESIAN_POINT('',(146.229117,-78.521921,1.51)); +#192858 = LINE('',#192859,#192860); +#192859 = CARTESIAN_POINT('',(146.229117,-78.521921,1.51)); +#192860 = VECTOR('',#192861,1.); +#192861 = DIRECTION('',(0.,0.,1.)); +#192862 = ORIENTED_EDGE('',*,*,#192863,.F.); +#192863 = EDGE_CURVE('',#192838,#192856,#192864,.T.); +#192864 = LINE('',#192865,#192866); +#192865 = CARTESIAN_POINT('',(146.193068,-78.536853,1.51)); +#192866 = VECTOR('',#192867,1.); +#192867 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#192868 = PLANE('',#192869); +#192869 = AXIS2_PLACEMENT_3D('',#192870,#192871,#192872); +#192870 = CARTESIAN_POINT('',(146.193068,-78.536853,1.51)); +#192871 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#192872 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#192873 = ADVANCED_FACE('',(#192874),#192899,.T.); +#192874 = FACE_BOUND('',#192875,.T.); +#192875 = EDGE_LOOP('',(#192876,#192877,#192885,#192893)); +#192876 = ORIENTED_EDGE('',*,*,#192855,.T.); +#192877 = ORIENTED_EDGE('',*,*,#192878,.T.); +#192878 = EDGE_CURVE('',#192848,#192879,#192881,.T.); +#192879 = VERTEX_POINT('',#192880); +#192880 = CARTESIAN_POINT('',(146.769509,-78.521921,1.545)); +#192881 = LINE('',#192882,#192883); +#192882 = CARTESIAN_POINT('',(146.229117,-78.521921,1.545)); +#192883 = VECTOR('',#192884,1.); +#192884 = DIRECTION('',(1.,0.,0.)); +#192885 = ORIENTED_EDGE('',*,*,#192886,.F.); +#192886 = EDGE_CURVE('',#192887,#192879,#192889,.T.); +#192887 = VERTEX_POINT('',#192888); +#192888 = CARTESIAN_POINT('',(146.769509,-78.521921,1.51)); +#192889 = LINE('',#192890,#192891); +#192890 = CARTESIAN_POINT('',(146.769509,-78.521921,1.51)); +#192891 = VECTOR('',#192892,1.); +#192892 = DIRECTION('',(0.,0.,1.)); +#192893 = ORIENTED_EDGE('',*,*,#192894,.F.); +#192894 = EDGE_CURVE('',#192856,#192887,#192895,.T.); +#192895 = LINE('',#192896,#192897); +#192896 = CARTESIAN_POINT('',(146.229117,-78.521921,1.51)); +#192897 = VECTOR('',#192898,1.); +#192898 = DIRECTION('',(1.,0.,0.)); +#192899 = PLANE('',#192900); +#192900 = AXIS2_PLACEMENT_3D('',#192901,#192902,#192903); +#192901 = CARTESIAN_POINT('',(146.229117,-78.521921,1.51)); +#192902 = DIRECTION('',(0.,1.,0.)); +#192903 = DIRECTION('',(1.,0.,0.)); +#192904 = ADVANCED_FACE('',(#192905),#192932,.T.); +#192905 = FACE_BOUND('',#192906,.T.); +#192906 = EDGE_LOOP('',(#192907,#192908,#192917,#192925)); +#192907 = ORIENTED_EDGE('',*,*,#192886,.T.); +#192908 = ORIENTED_EDGE('',*,*,#192909,.T.); +#192909 = EDGE_CURVE('',#192879,#192910,#192912,.T.); +#192910 = VERTEX_POINT('',#192911); +#192911 = CARTESIAN_POINT('',(146.769509,-78.718079,1.545)); +#192912 = CIRCLE('',#192913,0.100000456609); +#192913 = AXIS2_PLACEMENT_3D('',#192914,#192915,#192916); +#192914 = CARTESIAN_POINT('',(146.75,-78.62,1.545)); +#192915 = DIRECTION('',(0.,0.,-1.)); +#192916 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#192917 = ORIENTED_EDGE('',*,*,#192918,.F.); +#192918 = EDGE_CURVE('',#192919,#192910,#192921,.T.); +#192919 = VERTEX_POINT('',#192920); +#192920 = CARTESIAN_POINT('',(146.769509,-78.718079,1.51)); +#192921 = LINE('',#192922,#192923); +#192922 = CARTESIAN_POINT('',(146.769509,-78.718079,1.51)); +#192923 = VECTOR('',#192924,1.); +#192924 = DIRECTION('',(0.,0.,1.)); +#192925 = ORIENTED_EDGE('',*,*,#192926,.F.); +#192926 = EDGE_CURVE('',#192887,#192919,#192927,.T.); +#192927 = CIRCLE('',#192928,0.100000456609); +#192928 = AXIS2_PLACEMENT_3D('',#192929,#192930,#192931); +#192929 = CARTESIAN_POINT('',(146.75,-78.62,1.51)); +#192930 = DIRECTION('',(0.,0.,-1.)); +#192931 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#192932 = CYLINDRICAL_SURFACE('',#192933,0.100000456609); +#192933 = AXIS2_PLACEMENT_3D('',#192934,#192935,#192936); +#192934 = CARTESIAN_POINT('',(146.75,-78.62,1.51)); +#192935 = DIRECTION('',(0.,0.,-1.)); +#192936 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#192937 = ADVANCED_FACE('',(#192938),#192963,.T.); +#192938 = FACE_BOUND('',#192939,.T.); +#192939 = EDGE_LOOP('',(#192940,#192941,#192949,#192957)); +#192940 = ORIENTED_EDGE('',*,*,#192918,.T.); +#192941 = ORIENTED_EDGE('',*,*,#192942,.T.); +#192942 = EDGE_CURVE('',#192910,#192943,#192945,.T.); +#192943 = VERTEX_POINT('',#192944); +#192944 = CARTESIAN_POINT('',(146.290047,-78.72,1.545)); +#192945 = LINE('',#192946,#192947); +#192946 = CARTESIAN_POINT('',(146.769509,-78.718079,1.545)); +#192947 = VECTOR('',#192948,1.); +#192948 = DIRECTION('',(-0.999991973779,-4.006541877406E-03,0.)); +#192949 = ORIENTED_EDGE('',*,*,#192950,.F.); +#192950 = EDGE_CURVE('',#192951,#192943,#192953,.T.); +#192951 = VERTEX_POINT('',#192952); +#192952 = CARTESIAN_POINT('',(146.290047,-78.72,1.51)); +#192953 = LINE('',#192954,#192955); +#192954 = CARTESIAN_POINT('',(146.290047,-78.72,1.51)); +#192955 = VECTOR('',#192956,1.); +#192956 = DIRECTION('',(0.,0.,1.)); +#192957 = ORIENTED_EDGE('',*,*,#192958,.F.); +#192958 = EDGE_CURVE('',#192919,#192951,#192959,.T.); +#192959 = LINE('',#192960,#192961); +#192960 = CARTESIAN_POINT('',(146.769509,-78.718079,1.51)); +#192961 = VECTOR('',#192962,1.); +#192962 = DIRECTION('',(-0.999991973779,-4.006541877406E-03,0.)); +#192963 = PLANE('',#192964); +#192964 = AXIS2_PLACEMENT_3D('',#192965,#192966,#192967); +#192965 = CARTESIAN_POINT('',(146.769509,-78.718079,1.51)); +#192966 = DIRECTION('',(4.006541877406E-03,-0.999991973779,0.)); +#192967 = DIRECTION('',(-0.999991973779,-4.006541877406E-03,0.)); +#192968 = ADVANCED_FACE('',(#192969),#192994,.T.); +#192969 = FACE_BOUND('',#192970,.T.); +#192970 = EDGE_LOOP('',(#192971,#192972,#192980,#192988)); +#192971 = ORIENTED_EDGE('',*,*,#192950,.T.); +#192972 = ORIENTED_EDGE('',*,*,#192973,.T.); +#192973 = EDGE_CURVE('',#192943,#192974,#192976,.T.); +#192974 = VERTEX_POINT('',#192975); +#192975 = CARTESIAN_POINT('',(145.203813,-79.806234,1.545)); +#192976 = LINE('',#192977,#192978); +#192977 = CARTESIAN_POINT('',(146.290047,-78.72,1.545)); +#192978 = VECTOR('',#192979,1.); +#192979 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#192980 = ORIENTED_EDGE('',*,*,#192981,.F.); +#192981 = EDGE_CURVE('',#192982,#192974,#192984,.T.); +#192982 = VERTEX_POINT('',#192983); +#192983 = CARTESIAN_POINT('',(145.203813,-79.806234,1.51)); +#192984 = LINE('',#192985,#192986); +#192985 = CARTESIAN_POINT('',(145.203813,-79.806234,1.51)); +#192986 = VECTOR('',#192987,1.); +#192987 = DIRECTION('',(0.,0.,1.)); +#192988 = ORIENTED_EDGE('',*,*,#192989,.F.); +#192989 = EDGE_CURVE('',#192951,#192982,#192990,.T.); +#192990 = LINE('',#192991,#192992); +#192991 = CARTESIAN_POINT('',(146.290047,-78.72,1.51)); +#192992 = VECTOR('',#192993,1.); +#192993 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#192994 = PLANE('',#192995); +#192995 = AXIS2_PLACEMENT_3D('',#192996,#192997,#192998); +#192996 = CARTESIAN_POINT('',(146.290047,-78.72,1.51)); +#192997 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#192998 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#192999 = ADVANCED_FACE('',(#193000),#193025,.T.); +#193000 = FACE_BOUND('',#193001,.T.); +#193001 = EDGE_LOOP('',(#193002,#193003,#193011,#193019)); +#193002 = ORIENTED_EDGE('',*,*,#192981,.T.); +#193003 = ORIENTED_EDGE('',*,*,#193004,.T.); +#193004 = EDGE_CURVE('',#192974,#193005,#193007,.T.); +#193005 = VERTEX_POINT('',#193006); +#193006 = CARTESIAN_POINT('',(145.211477,-79.819508,1.545)); +#193007 = LINE('',#193008,#193009); +#193008 = CARTESIAN_POINT('',(145.203813,-79.806234,1.545)); +#193009 = VECTOR('',#193010,1.); +#193010 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#193011 = ORIENTED_EDGE('',*,*,#193012,.F.); +#193012 = EDGE_CURVE('',#193013,#193005,#193015,.T.); +#193013 = VERTEX_POINT('',#193014); +#193014 = CARTESIAN_POINT('',(145.211477,-79.819508,1.51)); +#193015 = LINE('',#193016,#193017); +#193016 = CARTESIAN_POINT('',(145.211477,-79.819508,1.51)); +#193017 = VECTOR('',#193018,1.); +#193018 = DIRECTION('',(0.,0.,1.)); +#193019 = ORIENTED_EDGE('',*,*,#193020,.F.); +#193020 = EDGE_CURVE('',#192982,#193013,#193021,.T.); +#193021 = LINE('',#193022,#193023); +#193022 = CARTESIAN_POINT('',(145.203813,-79.806234,1.51)); +#193023 = VECTOR('',#193024,1.); +#193024 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#193025 = PLANE('',#193026); +#193026 = AXIS2_PLACEMENT_3D('',#193027,#193028,#193029); +#193027 = CARTESIAN_POINT('',(145.203813,-79.806234,1.51)); +#193028 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#193029 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#193030 = ADVANCED_FACE('',(#193031),#193058,.T.); +#193031 = FACE_BOUND('',#193032,.T.); +#193032 = EDGE_LOOP('',(#193033,#193034,#193043,#193051)); +#193033 = ORIENTED_EDGE('',*,*,#193012,.T.); +#193034 = ORIENTED_EDGE('',*,*,#193035,.T.); +#193035 = EDGE_CURVE('',#193005,#193036,#193038,.T.); +#193036 = VERTEX_POINT('',#193037); +#193037 = CARTESIAN_POINT('',(145.049118,-79.657149,1.545)); +#193038 = CIRCLE('',#193039,0.299999934501); +#193039 = AXIS2_PLACEMENT_3D('',#193040,#193041,#193042); +#193040 = CARTESIAN_POINT('',(144.93431314059,-79.9343128594,1.545)); +#193041 = DIRECTION('',(0.,0.,-1.)); +#193042 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#193043 = ORIENTED_EDGE('',*,*,#193044,.F.); +#193044 = EDGE_CURVE('',#193045,#193036,#193047,.T.); +#193045 = VERTEX_POINT('',#193046); +#193046 = CARTESIAN_POINT('',(145.049118,-79.657149,1.51)); +#193047 = LINE('',#193048,#193049); +#193048 = CARTESIAN_POINT('',(145.049118,-79.657149,1.51)); +#193049 = VECTOR('',#193050,1.); +#193050 = DIRECTION('',(0.,0.,1.)); +#193051 = ORIENTED_EDGE('',*,*,#193052,.F.); +#193052 = EDGE_CURVE('',#193013,#193045,#193053,.T.); +#193053 = CIRCLE('',#193054,0.299999934501); +#193054 = AXIS2_PLACEMENT_3D('',#193055,#193056,#193057); +#193055 = CARTESIAN_POINT('',(144.93431314059,-79.9343128594,1.51)); +#193056 = DIRECTION('',(0.,0.,-1.)); +#193057 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#193058 = CYLINDRICAL_SURFACE('',#193059,0.299999934501); +#193059 = AXIS2_PLACEMENT_3D('',#193060,#193061,#193062); +#193060 = CARTESIAN_POINT('',(144.93431314059,-79.9343128594,1.51)); +#193061 = DIRECTION('',(0.,0.,-1.)); +#193062 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#193063 = ADVANCED_FACE('',(#193064),#193089,.T.); +#193064 = FACE_BOUND('',#193065,.T.); +#193065 = EDGE_LOOP('',(#193066,#193067,#193075,#193083)); +#193066 = ORIENTED_EDGE('',*,*,#193044,.T.); +#193067 = ORIENTED_EDGE('',*,*,#193068,.T.); +#193068 = EDGE_CURVE('',#193036,#193069,#193071,.T.); +#193069 = VERTEX_POINT('',#193070); +#193070 = CARTESIAN_POINT('',(145.062391,-79.664812,1.545)); +#193071 = LINE('',#193072,#193073); +#193072 = CARTESIAN_POINT('',(145.049118,-79.657149,1.545)); +#193073 = VECTOR('',#193074,1.); +#193074 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#193075 = ORIENTED_EDGE('',*,*,#193076,.F.); +#193076 = EDGE_CURVE('',#193077,#193069,#193079,.T.); +#193077 = VERTEX_POINT('',#193078); +#193078 = CARTESIAN_POINT('',(145.062391,-79.664812,1.51)); +#193079 = LINE('',#193080,#193081); +#193080 = CARTESIAN_POINT('',(145.062391,-79.664812,1.51)); +#193081 = VECTOR('',#193082,1.); +#193082 = DIRECTION('',(0.,0.,1.)); +#193083 = ORIENTED_EDGE('',*,*,#193084,.F.); +#193084 = EDGE_CURVE('',#193045,#193077,#193085,.T.); +#193085 = LINE('',#193086,#193087); +#193086 = CARTESIAN_POINT('',(145.049118,-79.657149,1.51)); +#193087 = VECTOR('',#193088,1.); +#193088 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#193089 = PLANE('',#193090); +#193090 = AXIS2_PLACEMENT_3D('',#193091,#193092,#193093); +#193091 = CARTESIAN_POINT('',(145.049118,-79.657149,1.51)); +#193092 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#193093 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#193094 = ADVANCED_FACE('',(#193095),#193111,.T.); +#193095 = FACE_BOUND('',#193096,.T.); +#193096 = EDGE_LOOP('',(#193097,#193098,#193104,#193105)); +#193097 = ORIENTED_EDGE('',*,*,#193076,.T.); +#193098 = ORIENTED_EDGE('',*,*,#193099,.T.); +#193099 = EDGE_CURVE('',#193069,#192840,#193100,.T.); +#193100 = LINE('',#193101,#193102); +#193101 = CARTESIAN_POINT('',(145.062391,-79.664812,1.545)); +#193102 = VECTOR('',#193103,1.); +#193103 = DIRECTION('',(0.707957187557,0.706255350838,0.)); +#193104 = ORIENTED_EDGE('',*,*,#192837,.F.); +#193105 = ORIENTED_EDGE('',*,*,#193106,.F.); +#193106 = EDGE_CURVE('',#193077,#192838,#193107,.T.); +#193107 = LINE('',#193108,#193109); +#193108 = CARTESIAN_POINT('',(145.062391,-79.664812,1.51)); +#193109 = VECTOR('',#193110,1.); +#193110 = DIRECTION('',(0.707957187557,0.706255350838,0.)); +#193111 = PLANE('',#193112); +#193112 = AXIS2_PLACEMENT_3D('',#193113,#193114,#193115); +#193113 = CARTESIAN_POINT('',(145.062391,-79.664812,1.51)); +#193114 = DIRECTION('',(-0.706255350838,0.707957187557,0.)); +#193115 = DIRECTION('',(0.707957187557,0.706255350838,0.)); +#193116 = ADVANCED_FACE('',(#193117),#193144,.F.); +#193117 = FACE_BOUND('',#193118,.T.); +#193118 = EDGE_LOOP('',(#193119,#193129,#193136,#193137)); +#193119 = ORIENTED_EDGE('',*,*,#193120,.T.); +#193120 = EDGE_CURVE('',#193121,#193123,#193125,.T.); +#193121 = VERTEX_POINT('',#193122); +#193122 = CARTESIAN_POINT('',(145.071568,-79.934313,1.51)); +#193123 = VERTEX_POINT('',#193124); +#193124 = CARTESIAN_POINT('',(145.071568,-79.934313,1.545)); +#193125 = LINE('',#193126,#193127); +#193126 = CARTESIAN_POINT('',(145.071568,-79.934313,1.51)); +#193127 = VECTOR('',#193128,1.); +#193128 = DIRECTION('',(0.,0.,1.)); +#193129 = ORIENTED_EDGE('',*,*,#193130,.T.); +#193130 = EDGE_CURVE('',#193123,#193123,#193131,.T.); +#193131 = CIRCLE('',#193132,0.137255); +#193132 = AXIS2_PLACEMENT_3D('',#193133,#193134,#193135); +#193133 = CARTESIAN_POINT('',(144.934313,-79.934313,1.545)); +#193134 = DIRECTION('',(0.,0.,1.)); +#193135 = DIRECTION('',(1.,0.,-0.)); +#193136 = ORIENTED_EDGE('',*,*,#193120,.F.); +#193137 = ORIENTED_EDGE('',*,*,#193138,.F.); +#193138 = EDGE_CURVE('',#193121,#193121,#193139,.T.); +#193139 = CIRCLE('',#193140,0.137255); +#193140 = AXIS2_PLACEMENT_3D('',#193141,#193142,#193143); +#193141 = CARTESIAN_POINT('',(144.934313,-79.934313,1.51)); +#193142 = DIRECTION('',(0.,0.,1.)); +#193143 = DIRECTION('',(1.,0.,-0.)); +#193144 = CYLINDRICAL_SURFACE('',#193145,0.137255); +#193145 = AXIS2_PLACEMENT_3D('',#193146,#193147,#193148); +#193146 = CARTESIAN_POINT('',(144.934313,-79.934313,1.51)); +#193147 = DIRECTION('',(-0.,-0.,-1.)); +#193148 = DIRECTION('',(1.,0.,-0.)); +#193149 = ADVANCED_FACE('',(#193150,#193161),#193164,.F.); +#193150 = FACE_BOUND('',#193151,.T.); +#193151 = EDGE_LOOP('',(#193152,#193153,#193154,#193155,#193156,#193157, + #193158,#193159,#193160)); +#193152 = ORIENTED_EDGE('',*,*,#192863,.T.); +#193153 = ORIENTED_EDGE('',*,*,#192894,.T.); +#193154 = ORIENTED_EDGE('',*,*,#192926,.T.); +#193155 = ORIENTED_EDGE('',*,*,#192958,.T.); +#193156 = ORIENTED_EDGE('',*,*,#192989,.T.); +#193157 = ORIENTED_EDGE('',*,*,#193020,.T.); +#193158 = ORIENTED_EDGE('',*,*,#193052,.T.); +#193159 = ORIENTED_EDGE('',*,*,#193084,.T.); +#193160 = ORIENTED_EDGE('',*,*,#193106,.T.); +#193161 = FACE_BOUND('',#193162,.T.); +#193162 = EDGE_LOOP('',(#193163)); +#193163 = ORIENTED_EDGE('',*,*,#193138,.T.); +#193164 = PLANE('',#193165); +#193165 = AXIS2_PLACEMENT_3D('',#193166,#193167,#193168); +#193166 = CARTESIAN_POINT('',(0.,0.,1.51)); +#193167 = DIRECTION('',(0.,0.,1.)); +#193168 = DIRECTION('',(1.,0.,-0.)); +#193169 = ADVANCED_FACE('',(#193170,#193181),#193184,.T.); +#193170 = FACE_BOUND('',#193171,.F.); +#193171 = EDGE_LOOP('',(#193172,#193173,#193174,#193175,#193176,#193177, + #193178,#193179,#193180)); +#193172 = ORIENTED_EDGE('',*,*,#192847,.T.); +#193173 = ORIENTED_EDGE('',*,*,#192878,.T.); +#193174 = ORIENTED_EDGE('',*,*,#192909,.T.); +#193175 = ORIENTED_EDGE('',*,*,#192942,.T.); +#193176 = ORIENTED_EDGE('',*,*,#192973,.T.); +#193177 = ORIENTED_EDGE('',*,*,#193004,.T.); +#193178 = ORIENTED_EDGE('',*,*,#193035,.T.); +#193179 = ORIENTED_EDGE('',*,*,#193068,.T.); +#193180 = ORIENTED_EDGE('',*,*,#193099,.T.); +#193181 = FACE_BOUND('',#193182,.F.); +#193182 = EDGE_LOOP('',(#193183)); +#193183 = ORIENTED_EDGE('',*,*,#193130,.T.); +#193184 = PLANE('',#193185); +#193185 = AXIS2_PLACEMENT_3D('',#193186,#193187,#193188); +#193186 = CARTESIAN_POINT('',(0.,0.,1.545)); +#193187 = DIRECTION('',(0.,0.,1.)); +#193188 = DIRECTION('',(1.,0.,-0.)); +#193189 = MANIFOLD_SOLID_BREP('',#193190); +#193190 = CLOSED_SHELL('',(#193191,#193231,#193262,#193293,#193324, + #193355,#193386,#193417,#193448,#193479,#193510,#193541,#193572, + #193603,#193634,#193665,#193696,#193727,#193758,#193789,#193820, + #193851,#193882,#193913,#193944,#193975,#194006,#194037,#194068, + #194099,#194130,#194161,#194192,#194225,#194256,#194287,#194318, + #194349,#194380,#194411,#194442,#194473,#194504,#194535,#194566, + #194597,#194628,#194659,#194690,#194721,#194752,#194783,#194814, + #194845,#194876,#194907,#194938,#194969,#195000,#195031,#195062, + #195093,#195126,#195148,#195181,#195214,#195291)); +#193191 = ADVANCED_FACE('',(#193192),#193226,.F.); +#193192 = FACE_BOUND('',#193193,.F.); +#193193 = EDGE_LOOP('',(#193194,#193204,#193212,#193220)); +#193194 = ORIENTED_EDGE('',*,*,#193195,.T.); +#193195 = EDGE_CURVE('',#193196,#193198,#193200,.T.); +#193196 = VERTEX_POINT('',#193197); +#193197 = CARTESIAN_POINT('',(145.200214,-79.8,0.)); +#193198 = VERTEX_POINT('',#193199); +#193199 = CARTESIAN_POINT('',(145.200214,-79.8,-3.5E-02)); +#193200 = LINE('',#193201,#193202); +#193201 = CARTESIAN_POINT('',(145.200214,-79.8,0.)); +#193202 = VECTOR('',#193203,1.); +#193203 = DIRECTION('',(0.,0.,-1.)); +#193204 = ORIENTED_EDGE('',*,*,#193205,.T.); +#193205 = EDGE_CURVE('',#193198,#193206,#193208,.T.); +#193206 = VERTEX_POINT('',#193207); +#193207 = CARTESIAN_POINT('',(145.768038,-79.801921,-3.5E-02)); +#193208 = LINE('',#193209,#193210); +#193209 = CARTESIAN_POINT('',(145.200214,-79.8,-3.5E-02)); +#193210 = VECTOR('',#193211,1.); +#193211 = DIRECTION('',(0.999994277398,-3.383071175009E-03,0.)); +#193212 = ORIENTED_EDGE('',*,*,#193213,.F.); +#193213 = EDGE_CURVE('',#193214,#193206,#193216,.T.); +#193214 = VERTEX_POINT('',#193215); +#193215 = CARTESIAN_POINT('',(145.768038,-79.801921,0.)); +#193216 = LINE('',#193217,#193218); +#193217 = CARTESIAN_POINT('',(145.768038,-79.801921,0.)); +#193218 = VECTOR('',#193219,1.); +#193219 = DIRECTION('',(0.,0.,-1.)); +#193220 = ORIENTED_EDGE('',*,*,#193221,.F.); +#193221 = EDGE_CURVE('',#193196,#193214,#193222,.T.); +#193222 = LINE('',#193223,#193224); +#193223 = CARTESIAN_POINT('',(145.200214,-79.8,0.)); +#193224 = VECTOR('',#193225,1.); +#193225 = DIRECTION('',(0.999994277398,-3.383071175009E-03,0.)); +#193226 = PLANE('',#193227); +#193227 = AXIS2_PLACEMENT_3D('',#193228,#193229,#193230); +#193228 = CARTESIAN_POINT('',(145.200214,-79.8,0.)); +#193229 = DIRECTION('',(-3.383071175009E-03,-0.999994277398,-0.)); +#193230 = DIRECTION('',(0.999994277398,-3.383071175009E-03,0.)); +#193231 = ADVANCED_FACE('',(#193232),#193257,.F.); +#193232 = FACE_BOUND('',#193233,.F.); +#193233 = EDGE_LOOP('',(#193234,#193235,#193243,#193251)); +#193234 = ORIENTED_EDGE('',*,*,#193213,.T.); +#193235 = ORIENTED_EDGE('',*,*,#193236,.T.); +#193236 = EDGE_CURVE('',#193206,#193237,#193239,.T.); +#193237 = VERTEX_POINT('',#193238); +#193238 = CARTESIAN_POINT('',(145.804086,-79.816853,-3.5E-02)); +#193239 = LINE('',#193240,#193241); +#193240 = CARTESIAN_POINT('',(145.768038,-79.801921,-3.5E-02)); +#193241 = VECTOR('',#193242,1.); +#193242 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#193243 = ORIENTED_EDGE('',*,*,#193244,.F.); +#193244 = EDGE_CURVE('',#193245,#193237,#193247,.T.); +#193245 = VERTEX_POINT('',#193246); +#193246 = CARTESIAN_POINT('',(145.804086,-79.816853,0.)); +#193247 = LINE('',#193248,#193249); +#193248 = CARTESIAN_POINT('',(145.804086,-79.816853,0.)); +#193249 = VECTOR('',#193250,1.); +#193250 = DIRECTION('',(0.,0.,-1.)); +#193251 = ORIENTED_EDGE('',*,*,#193252,.F.); +#193252 = EDGE_CURVE('',#193214,#193245,#193253,.T.); +#193253 = LINE('',#193254,#193255); +#193254 = CARTESIAN_POINT('',(145.768038,-79.801921,0.)); +#193255 = VECTOR('',#193256,1.); +#193256 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#193257 = PLANE('',#193258); +#193258 = AXIS2_PLACEMENT_3D('',#193259,#193260,#193261); +#193259 = CARTESIAN_POINT('',(145.768038,-79.801921,0.)); +#193260 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#193261 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#193262 = ADVANCED_FACE('',(#193263),#193288,.F.); +#193263 = FACE_BOUND('',#193264,.F.); +#193264 = EDGE_LOOP('',(#193265,#193266,#193274,#193282)); +#193265 = ORIENTED_EDGE('',*,*,#193244,.T.); +#193266 = ORIENTED_EDGE('',*,*,#193267,.T.); +#193267 = EDGE_CURVE('',#193237,#193268,#193270,.T.); +#193268 = VERTEX_POINT('',#193269); +#193269 = CARTESIAN_POINT('',(146.183147,-80.195914,-3.5E-02)); +#193270 = LINE('',#193271,#193272); +#193271 = CARTESIAN_POINT('',(145.804086,-79.816853,-3.5E-02)); +#193272 = VECTOR('',#193273,1.); +#193273 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#193274 = ORIENTED_EDGE('',*,*,#193275,.F.); +#193275 = EDGE_CURVE('',#193276,#193268,#193278,.T.); +#193276 = VERTEX_POINT('',#193277); +#193277 = CARTESIAN_POINT('',(146.183147,-80.195914,0.)); +#193278 = LINE('',#193279,#193280); +#193279 = CARTESIAN_POINT('',(146.183147,-80.195914,0.)); +#193280 = VECTOR('',#193281,1.); +#193281 = DIRECTION('',(0.,0.,-1.)); +#193282 = ORIENTED_EDGE('',*,*,#193283,.F.); +#193283 = EDGE_CURVE('',#193245,#193276,#193284,.T.); +#193284 = LINE('',#193285,#193286); +#193285 = CARTESIAN_POINT('',(145.804086,-79.816853,0.)); +#193286 = VECTOR('',#193287,1.); +#193287 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#193288 = PLANE('',#193289); +#193289 = AXIS2_PLACEMENT_3D('',#193290,#193291,#193292); +#193290 = CARTESIAN_POINT('',(145.804086,-79.816853,0.)); +#193291 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#193292 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#193293 = ADVANCED_FACE('',(#193294),#193319,.F.); +#193294 = FACE_BOUND('',#193295,.F.); +#193295 = EDGE_LOOP('',(#193296,#193297,#193305,#193313)); +#193296 = ORIENTED_EDGE('',*,*,#193275,.T.); +#193297 = ORIENTED_EDGE('',*,*,#193298,.T.); +#193298 = EDGE_CURVE('',#193268,#193299,#193301,.T.); +#193299 = VERTEX_POINT('',#193300); +#193300 = CARTESIAN_POINT('',(146.198079,-80.231962,-3.5E-02)); +#193301 = LINE('',#193302,#193303); +#193302 = CARTESIAN_POINT('',(146.183147,-80.195914,-3.5E-02)); +#193303 = VECTOR('',#193304,1.); +#193304 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193305 = ORIENTED_EDGE('',*,*,#193306,.F.); +#193306 = EDGE_CURVE('',#193307,#193299,#193309,.T.); +#193307 = VERTEX_POINT('',#193308); +#193308 = CARTESIAN_POINT('',(146.198079,-80.231962,0.)); +#193309 = LINE('',#193310,#193311); +#193310 = CARTESIAN_POINT('',(146.198079,-80.231962,0.)); +#193311 = VECTOR('',#193312,1.); +#193312 = DIRECTION('',(0.,0.,-1.)); +#193313 = ORIENTED_EDGE('',*,*,#193314,.F.); +#193314 = EDGE_CURVE('',#193276,#193307,#193315,.T.); +#193315 = LINE('',#193316,#193317); +#193316 = CARTESIAN_POINT('',(146.183147,-80.195914,0.)); +#193317 = VECTOR('',#193318,1.); +#193318 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193319 = PLANE('',#193320); +#193320 = AXIS2_PLACEMENT_3D('',#193321,#193322,#193323); +#193321 = CARTESIAN_POINT('',(146.183147,-80.195914,0.)); +#193322 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#193323 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193324 = ADVANCED_FACE('',(#193325),#193350,.F.); +#193325 = FACE_BOUND('',#193326,.F.); +#193326 = EDGE_LOOP('',(#193327,#193328,#193336,#193344)); +#193327 = ORIENTED_EDGE('',*,*,#193306,.T.); +#193328 = ORIENTED_EDGE('',*,*,#193329,.T.); +#193329 = EDGE_CURVE('',#193299,#193330,#193332,.T.); +#193330 = VERTEX_POINT('',#193331); +#193331 = CARTESIAN_POINT('',(146.2,-88.710049,-3.5E-02)); +#193332 = LINE('',#193333,#193334); +#193333 = CARTESIAN_POINT('',(146.198079,-80.231962,-3.5E-02)); +#193334 = VECTOR('',#193335,1.); +#193335 = DIRECTION('',(2.265841280786E-04,-0.99999997433,0.)); +#193336 = ORIENTED_EDGE('',*,*,#193337,.F.); +#193337 = EDGE_CURVE('',#193338,#193330,#193340,.T.); +#193338 = VERTEX_POINT('',#193339); +#193339 = CARTESIAN_POINT('',(146.2,-88.710049,0.)); +#193340 = LINE('',#193341,#193342); +#193341 = CARTESIAN_POINT('',(146.2,-88.710049,0.)); +#193342 = VECTOR('',#193343,1.); +#193343 = DIRECTION('',(0.,0.,-1.)); +#193344 = ORIENTED_EDGE('',*,*,#193345,.F.); +#193345 = EDGE_CURVE('',#193307,#193338,#193346,.T.); +#193346 = LINE('',#193347,#193348); +#193347 = CARTESIAN_POINT('',(146.198079,-80.231962,0.)); +#193348 = VECTOR('',#193349,1.); +#193349 = DIRECTION('',(2.265841280786E-04,-0.99999997433,0.)); +#193350 = PLANE('',#193351); +#193351 = AXIS2_PLACEMENT_3D('',#193352,#193353,#193354); +#193352 = CARTESIAN_POINT('',(146.198079,-80.231962,0.)); +#193353 = DIRECTION('',(-0.99999997433,-2.265841280786E-04,-0.)); +#193354 = DIRECTION('',(2.265841280786E-04,-0.99999997433,0.)); +#193355 = ADVANCED_FACE('',(#193356),#193381,.F.); +#193356 = FACE_BOUND('',#193357,.F.); +#193357 = EDGE_LOOP('',(#193358,#193359,#193367,#193375)); +#193358 = ORIENTED_EDGE('',*,*,#193337,.T.); +#193359 = ORIENTED_EDGE('',*,*,#193360,.T.); +#193360 = EDGE_CURVE('',#193330,#193361,#193363,.T.); +#193361 = VERTEX_POINT('',#193362); +#193362 = CARTESIAN_POINT('',(148.683147,-91.195914,-3.5E-02)); +#193363 = LINE('',#193364,#193365); +#193364 = CARTESIAN_POINT('',(146.2,-88.710049,-3.5E-02)); +#193365 = VECTOR('',#193366,1.); +#193366 = DIRECTION('',(0.706719895106,-0.707493455702,0.)); +#193367 = ORIENTED_EDGE('',*,*,#193368,.F.); +#193368 = EDGE_CURVE('',#193369,#193361,#193371,.T.); +#193369 = VERTEX_POINT('',#193370); +#193370 = CARTESIAN_POINT('',(148.683147,-91.195914,0.)); +#193371 = LINE('',#193372,#193373); +#193372 = CARTESIAN_POINT('',(148.683147,-91.195914,0.)); +#193373 = VECTOR('',#193374,1.); +#193374 = DIRECTION('',(0.,0.,-1.)); +#193375 = ORIENTED_EDGE('',*,*,#193376,.F.); +#193376 = EDGE_CURVE('',#193338,#193369,#193377,.T.); +#193377 = LINE('',#193378,#193379); +#193378 = CARTESIAN_POINT('',(146.2,-88.710049,0.)); +#193379 = VECTOR('',#193380,1.); +#193380 = DIRECTION('',(0.706719895106,-0.707493455702,0.)); +#193381 = PLANE('',#193382); +#193382 = AXIS2_PLACEMENT_3D('',#193383,#193384,#193385); +#193383 = CARTESIAN_POINT('',(146.2,-88.710049,0.)); +#193384 = DIRECTION('',(-0.707493455702,-0.706719895106,-0.)); +#193385 = DIRECTION('',(0.706719895106,-0.707493455702,0.)); +#193386 = ADVANCED_FACE('',(#193387),#193412,.F.); +#193387 = FACE_BOUND('',#193388,.F.); +#193388 = EDGE_LOOP('',(#193389,#193390,#193398,#193406)); +#193389 = ORIENTED_EDGE('',*,*,#193368,.T.); +#193390 = ORIENTED_EDGE('',*,*,#193391,.T.); +#193391 = EDGE_CURVE('',#193361,#193392,#193394,.T.); +#193392 = VERTEX_POINT('',#193393); +#193393 = CARTESIAN_POINT('',(148.698079,-91.231962,-3.5E-02)); +#193394 = LINE('',#193395,#193396); +#193395 = CARTESIAN_POINT('',(148.683147,-91.195914,-3.5E-02)); +#193396 = VECTOR('',#193397,1.); +#193397 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193398 = ORIENTED_EDGE('',*,*,#193399,.F.); +#193399 = EDGE_CURVE('',#193400,#193392,#193402,.T.); +#193400 = VERTEX_POINT('',#193401); +#193401 = CARTESIAN_POINT('',(148.698079,-91.231962,0.)); +#193402 = LINE('',#193403,#193404); +#193403 = CARTESIAN_POINT('',(148.698079,-91.231962,0.)); +#193404 = VECTOR('',#193405,1.); +#193405 = DIRECTION('',(0.,0.,-1.)); +#193406 = ORIENTED_EDGE('',*,*,#193407,.F.); +#193407 = EDGE_CURVE('',#193369,#193400,#193408,.T.); +#193408 = LINE('',#193409,#193410); +#193409 = CARTESIAN_POINT('',(148.683147,-91.195914,0.)); +#193410 = VECTOR('',#193411,1.); +#193411 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193412 = PLANE('',#193413); +#193413 = AXIS2_PLACEMENT_3D('',#193414,#193415,#193416); +#193414 = CARTESIAN_POINT('',(148.683147,-91.195914,0.)); +#193415 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#193416 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#193417 = ADVANCED_FACE('',(#193418),#193443,.F.); +#193418 = FACE_BOUND('',#193419,.F.); +#193419 = EDGE_LOOP('',(#193420,#193421,#193429,#193437)); +#193420 = ORIENTED_EDGE('',*,*,#193399,.T.); +#193421 = ORIENTED_EDGE('',*,*,#193422,.T.); +#193422 = EDGE_CURVE('',#193392,#193423,#193425,.T.); +#193423 = VERTEX_POINT('',#193424); +#193424 = CARTESIAN_POINT('',(148.698079,-109.919509,-3.5E-02)); +#193425 = LINE('',#193426,#193427); +#193426 = CARTESIAN_POINT('',(148.698079,-91.231962,-3.5E-02)); +#193427 = VECTOR('',#193428,1.); +#193428 = DIRECTION('',(0.,-1.,0.)); +#193429 = ORIENTED_EDGE('',*,*,#193430,.F.); +#193430 = EDGE_CURVE('',#193431,#193423,#193433,.T.); +#193431 = VERTEX_POINT('',#193432); +#193432 = CARTESIAN_POINT('',(148.698079,-109.919509,0.)); +#193433 = LINE('',#193434,#193435); +#193434 = CARTESIAN_POINT('',(148.698079,-109.919509,0.)); +#193435 = VECTOR('',#193436,1.); +#193436 = DIRECTION('',(0.,0.,-1.)); +#193437 = ORIENTED_EDGE('',*,*,#193438,.F.); +#193438 = EDGE_CURVE('',#193400,#193431,#193439,.T.); +#193439 = LINE('',#193440,#193441); +#193440 = CARTESIAN_POINT('',(148.698079,-91.231962,0.)); +#193441 = VECTOR('',#193442,1.); +#193442 = DIRECTION('',(0.,-1.,0.)); +#193443 = PLANE('',#193444); +#193444 = AXIS2_PLACEMENT_3D('',#193445,#193446,#193447); +#193445 = CARTESIAN_POINT('',(148.698079,-91.231962,0.)); +#193446 = DIRECTION('',(-1.,-0.,-0.)); +#193447 = DIRECTION('',(0.,-1.,0.)); +#193448 = ADVANCED_FACE('',(#193449),#193474,.F.); +#193449 = FACE_BOUND('',#193450,.F.); +#193450 = EDGE_LOOP('',(#193451,#193452,#193460,#193468)); +#193451 = ORIENTED_EDGE('',*,*,#193430,.T.); +#193452 = ORIENTED_EDGE('',*,*,#193453,.T.); +#193453 = EDGE_CURVE('',#193423,#193454,#193456,.T.); +#193454 = VERTEX_POINT('',#193455); +#193455 = CARTESIAN_POINT('',(148.683147,-109.955557,-3.5E-02)); +#193456 = LINE('',#193457,#193458); +#193457 = CARTESIAN_POINT('',(148.698079,-109.919509,-3.5E-02)); +#193458 = VECTOR('',#193459,1.); +#193459 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193460 = ORIENTED_EDGE('',*,*,#193461,.F.); +#193461 = EDGE_CURVE('',#193462,#193454,#193464,.T.); +#193462 = VERTEX_POINT('',#193463); +#193463 = CARTESIAN_POINT('',(148.683147,-109.955557,0.)); +#193464 = LINE('',#193465,#193466); +#193465 = CARTESIAN_POINT('',(148.683147,-109.955557,0.)); +#193466 = VECTOR('',#193467,1.); +#193467 = DIRECTION('',(0.,0.,-1.)); +#193468 = ORIENTED_EDGE('',*,*,#193469,.F.); +#193469 = EDGE_CURVE('',#193431,#193462,#193470,.T.); +#193470 = LINE('',#193471,#193472); +#193471 = CARTESIAN_POINT('',(148.698079,-109.919509,0.)); +#193472 = VECTOR('',#193473,1.); +#193473 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193474 = PLANE('',#193475); +#193475 = AXIS2_PLACEMENT_3D('',#193476,#193477,#193478); +#193476 = CARTESIAN_POINT('',(148.698079,-109.919509,0.)); +#193477 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#193478 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193479 = ADVANCED_FACE('',(#193480),#193505,.F.); +#193480 = FACE_BOUND('',#193481,.F.); +#193481 = EDGE_LOOP('',(#193482,#193483,#193491,#193499)); +#193482 = ORIENTED_EDGE('',*,*,#193461,.T.); +#193483 = ORIENTED_EDGE('',*,*,#193484,.T.); +#193484 = EDGE_CURVE('',#193454,#193485,#193487,.T.); +#193485 = VERTEX_POINT('',#193486); +#193486 = CARTESIAN_POINT('',(142.555557,-116.083147,-3.5E-02)); +#193487 = LINE('',#193488,#193489); +#193488 = CARTESIAN_POINT('',(148.683147,-109.955557,-3.5E-02)); +#193489 = VECTOR('',#193490,1.); +#193490 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193491 = ORIENTED_EDGE('',*,*,#193492,.F.); +#193492 = EDGE_CURVE('',#193493,#193485,#193495,.T.); +#193493 = VERTEX_POINT('',#193494); +#193494 = CARTESIAN_POINT('',(142.555557,-116.083147,0.)); +#193495 = LINE('',#193496,#193497); +#193496 = CARTESIAN_POINT('',(142.555557,-116.083147,0.)); +#193497 = VECTOR('',#193498,1.); +#193498 = DIRECTION('',(0.,0.,-1.)); +#193499 = ORIENTED_EDGE('',*,*,#193500,.F.); +#193500 = EDGE_CURVE('',#193462,#193493,#193501,.T.); +#193501 = LINE('',#193502,#193503); +#193502 = CARTESIAN_POINT('',(148.683147,-109.955557,0.)); +#193503 = VECTOR('',#193504,1.); +#193504 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193505 = PLANE('',#193506); +#193506 = AXIS2_PLACEMENT_3D('',#193507,#193508,#193509); +#193507 = CARTESIAN_POINT('',(148.683147,-109.955557,0.)); +#193508 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193509 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193510 = ADVANCED_FACE('',(#193511),#193536,.F.); +#193511 = FACE_BOUND('',#193512,.F.); +#193512 = EDGE_LOOP('',(#193513,#193514,#193522,#193530)); +#193513 = ORIENTED_EDGE('',*,*,#193492,.T.); +#193514 = ORIENTED_EDGE('',*,*,#193515,.T.); +#193515 = EDGE_CURVE('',#193485,#193516,#193518,.T.); +#193516 = VERTEX_POINT('',#193517); +#193517 = CARTESIAN_POINT('',(142.519509,-116.098079,-3.5E-02)); +#193518 = LINE('',#193519,#193520); +#193519 = CARTESIAN_POINT('',(142.555557,-116.083147,-3.5E-02)); +#193520 = VECTOR('',#193521,1.); +#193521 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#193522 = ORIENTED_EDGE('',*,*,#193523,.F.); +#193523 = EDGE_CURVE('',#193524,#193516,#193526,.T.); +#193524 = VERTEX_POINT('',#193525); +#193525 = CARTESIAN_POINT('',(142.519509,-116.098079,0.)); +#193526 = LINE('',#193527,#193528); +#193527 = CARTESIAN_POINT('',(142.519509,-116.098079,0.)); +#193528 = VECTOR('',#193529,1.); +#193529 = DIRECTION('',(0.,0.,-1.)); +#193530 = ORIENTED_EDGE('',*,*,#193531,.F.); +#193531 = EDGE_CURVE('',#193493,#193524,#193532,.T.); +#193532 = LINE('',#193533,#193534); +#193533 = CARTESIAN_POINT('',(142.555557,-116.083147,0.)); +#193534 = VECTOR('',#193535,1.); +#193535 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#193536 = PLANE('',#193537); +#193537 = AXIS2_PLACEMENT_3D('',#193538,#193539,#193540); +#193538 = CARTESIAN_POINT('',(142.555557,-116.083147,0.)); +#193539 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193540 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#193541 = ADVANCED_FACE('',(#193542),#193567,.F.); +#193542 = FACE_BOUND('',#193543,.F.); +#193543 = EDGE_LOOP('',(#193544,#193545,#193553,#193561)); +#193544 = ORIENTED_EDGE('',*,*,#193523,.T.); +#193545 = ORIENTED_EDGE('',*,*,#193546,.T.); +#193546 = EDGE_CURVE('',#193516,#193547,#193549,.T.); +#193547 = VERTEX_POINT('',#193548); +#193548 = CARTESIAN_POINT('',(141.480491,-116.098079,-3.5E-02)); +#193549 = LINE('',#193550,#193551); +#193550 = CARTESIAN_POINT('',(142.519509,-116.098079,-3.5E-02)); +#193551 = VECTOR('',#193552,1.); +#193552 = DIRECTION('',(-1.,0.,0.)); +#193553 = ORIENTED_EDGE('',*,*,#193554,.F.); +#193554 = EDGE_CURVE('',#193555,#193547,#193557,.T.); +#193555 = VERTEX_POINT('',#193556); +#193556 = CARTESIAN_POINT('',(141.480491,-116.098079,0.)); +#193557 = LINE('',#193558,#193559); +#193558 = CARTESIAN_POINT('',(141.480491,-116.098079,0.)); +#193559 = VECTOR('',#193560,1.); +#193560 = DIRECTION('',(0.,0.,-1.)); +#193561 = ORIENTED_EDGE('',*,*,#193562,.F.); +#193562 = EDGE_CURVE('',#193524,#193555,#193563,.T.); +#193563 = LINE('',#193564,#193565); +#193564 = CARTESIAN_POINT('',(142.519509,-116.098079,0.)); +#193565 = VECTOR('',#193566,1.); +#193566 = DIRECTION('',(-1.,0.,0.)); +#193567 = PLANE('',#193568); +#193568 = AXIS2_PLACEMENT_3D('',#193569,#193570,#193571); +#193569 = CARTESIAN_POINT('',(142.519509,-116.098079,0.)); +#193570 = DIRECTION('',(0.,1.,0.)); +#193571 = DIRECTION('',(-1.,0.,0.)); +#193572 = ADVANCED_FACE('',(#193573),#193598,.F.); +#193573 = FACE_BOUND('',#193574,.F.); +#193574 = EDGE_LOOP('',(#193575,#193576,#193584,#193592)); +#193575 = ORIENTED_EDGE('',*,*,#193554,.T.); +#193576 = ORIENTED_EDGE('',*,*,#193577,.T.); +#193577 = EDGE_CURVE('',#193547,#193578,#193580,.T.); +#193578 = VERTEX_POINT('',#193579); +#193579 = CARTESIAN_POINT('',(141.45584,-116.087868,-3.5E-02)); +#193580 = LINE('',#193581,#193582); +#193581 = CARTESIAN_POINT('',(141.480491,-116.098079,-3.5E-02)); +#193582 = VECTOR('',#193583,1.); +#193583 = DIRECTION('',(-0.923876597829,0.382690517238,0.)); +#193584 = ORIENTED_EDGE('',*,*,#193585,.F.); +#193585 = EDGE_CURVE('',#193586,#193578,#193588,.T.); +#193586 = VERTEX_POINT('',#193587); +#193587 = CARTESIAN_POINT('',(141.45584,-116.087868,0.)); +#193588 = LINE('',#193589,#193590); +#193589 = CARTESIAN_POINT('',(141.45584,-116.087868,0.)); +#193590 = VECTOR('',#193591,1.); +#193591 = DIRECTION('',(0.,0.,-1.)); +#193592 = ORIENTED_EDGE('',*,*,#193593,.F.); +#193593 = EDGE_CURVE('',#193555,#193586,#193594,.T.); +#193594 = LINE('',#193595,#193596); +#193595 = CARTESIAN_POINT('',(141.480491,-116.098079,0.)); +#193596 = VECTOR('',#193597,1.); +#193597 = DIRECTION('',(-0.923876597829,0.382690517238,0.)); +#193598 = PLANE('',#193599); +#193599 = AXIS2_PLACEMENT_3D('',#193600,#193601,#193602); +#193600 = CARTESIAN_POINT('',(141.480491,-116.098079,0.)); +#193601 = DIRECTION('',(0.382690517238,0.923876597829,0.)); +#193602 = DIRECTION('',(-0.923876597829,0.382690517238,0.)); +#193603 = ADVANCED_FACE('',(#193604),#193629,.F.); +#193604 = FACE_BOUND('',#193605,.F.); +#193605 = EDGE_LOOP('',(#193606,#193607,#193615,#193623)); +#193606 = ORIENTED_EDGE('',*,*,#193585,.T.); +#193607 = ORIENTED_EDGE('',*,*,#193608,.T.); +#193608 = EDGE_CURVE('',#193578,#193609,#193611,.T.); +#193609 = VERTEX_POINT('',#193610); +#193610 = CARTESIAN_POINT('',(141.231962,-116.085947,-3.5E-02)); +#193611 = LINE('',#193612,#193613); +#193612 = CARTESIAN_POINT('',(141.45584,-116.087868,-3.5E-02)); +#193613 = VECTOR('',#193614,1.); +#193614 = DIRECTION('',(-0.999963188975,8.580250341775E-03,0.)); +#193615 = ORIENTED_EDGE('',*,*,#193616,.F.); +#193616 = EDGE_CURVE('',#193617,#193609,#193619,.T.); +#193617 = VERTEX_POINT('',#193618); +#193618 = CARTESIAN_POINT('',(141.231962,-116.085947,0.)); +#193619 = LINE('',#193620,#193621); +#193620 = CARTESIAN_POINT('',(141.231962,-116.085947,0.)); +#193621 = VECTOR('',#193622,1.); +#193622 = DIRECTION('',(0.,0.,-1.)); +#193623 = ORIENTED_EDGE('',*,*,#193624,.F.); +#193624 = EDGE_CURVE('',#193586,#193617,#193625,.T.); +#193625 = LINE('',#193626,#193627); +#193626 = CARTESIAN_POINT('',(141.45584,-116.087868,0.)); +#193627 = VECTOR('',#193628,1.); +#193628 = DIRECTION('',(-0.999963188975,8.580250341775E-03,0.)); +#193629 = PLANE('',#193630); +#193630 = AXIS2_PLACEMENT_3D('',#193631,#193632,#193633); +#193631 = CARTESIAN_POINT('',(141.45584,-116.087868,0.)); +#193632 = DIRECTION('',(8.580250341775E-03,0.999963188975,0.)); +#193633 = DIRECTION('',(-0.999963188975,8.580250341775E-03,0.)); +#193634 = ADVANCED_FACE('',(#193635),#193660,.F.); +#193635 = FACE_BOUND('',#193636,.F.); +#193636 = EDGE_LOOP('',(#193637,#193638,#193646,#193654)); +#193637 = ORIENTED_EDGE('',*,*,#193616,.T.); +#193638 = ORIENTED_EDGE('',*,*,#193639,.T.); +#193639 = EDGE_CURVE('',#193609,#193640,#193642,.T.); +#193640 = VERTEX_POINT('',#193641); +#193641 = CARTESIAN_POINT('',(141.195914,-116.071015,-3.5E-02)); +#193642 = LINE('',#193643,#193644); +#193643 = CARTESIAN_POINT('',(141.231962,-116.085947,-3.5E-02)); +#193644 = VECTOR('',#193645,1.); +#193645 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#193646 = ORIENTED_EDGE('',*,*,#193647,.F.); +#193647 = EDGE_CURVE('',#193648,#193640,#193650,.T.); +#193648 = VERTEX_POINT('',#193649); +#193649 = CARTESIAN_POINT('',(141.195914,-116.071015,0.)); +#193650 = LINE('',#193651,#193652); +#193651 = CARTESIAN_POINT('',(141.195914,-116.071015,0.)); +#193652 = VECTOR('',#193653,1.); +#193653 = DIRECTION('',(0.,0.,-1.)); +#193654 = ORIENTED_EDGE('',*,*,#193655,.F.); +#193655 = EDGE_CURVE('',#193617,#193648,#193656,.T.); +#193656 = LINE('',#193657,#193658); +#193657 = CARTESIAN_POINT('',(141.231962,-116.085947,0.)); +#193658 = VECTOR('',#193659,1.); +#193659 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#193660 = PLANE('',#193661); +#193661 = AXIS2_PLACEMENT_3D('',#193662,#193663,#193664); +#193662 = CARTESIAN_POINT('',(141.231962,-116.085947,0.)); +#193663 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#193664 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#193665 = ADVANCED_FACE('',(#193666),#193691,.F.); +#193666 = FACE_BOUND('',#193667,.F.); +#193667 = EDGE_LOOP('',(#193668,#193669,#193677,#193685)); +#193668 = ORIENTED_EDGE('',*,*,#193647,.T.); +#193669 = ORIENTED_EDGE('',*,*,#193670,.T.); +#193670 = EDGE_CURVE('',#193640,#193671,#193673,.T.); +#193671 = VERTEX_POINT('',#193672); +#193672 = CARTESIAN_POINT('',(140.816853,-115.691954,-3.5E-02)); +#193673 = LINE('',#193674,#193675); +#193674 = CARTESIAN_POINT('',(141.195914,-116.071015,-3.5E-02)); +#193675 = VECTOR('',#193676,1.); +#193676 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193677 = ORIENTED_EDGE('',*,*,#193678,.F.); +#193678 = EDGE_CURVE('',#193679,#193671,#193681,.T.); +#193679 = VERTEX_POINT('',#193680); +#193680 = CARTESIAN_POINT('',(140.816853,-115.691954,0.)); +#193681 = LINE('',#193682,#193683); +#193682 = CARTESIAN_POINT('',(140.816853,-115.691954,0.)); +#193683 = VECTOR('',#193684,1.); +#193684 = DIRECTION('',(0.,0.,-1.)); +#193685 = ORIENTED_EDGE('',*,*,#193686,.F.); +#193686 = EDGE_CURVE('',#193648,#193679,#193687,.T.); +#193687 = LINE('',#193688,#193689); +#193688 = CARTESIAN_POINT('',(141.195914,-116.071015,0.)); +#193689 = VECTOR('',#193690,1.); +#193690 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193691 = PLANE('',#193692); +#193692 = AXIS2_PLACEMENT_3D('',#193693,#193694,#193695); +#193693 = CARTESIAN_POINT('',(141.195914,-116.071015,0.)); +#193694 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#193695 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193696 = ADVANCED_FACE('',(#193697),#193722,.F.); +#193697 = FACE_BOUND('',#193698,.F.); +#193698 = EDGE_LOOP('',(#193699,#193700,#193708,#193716)); +#193699 = ORIENTED_EDGE('',*,*,#193678,.T.); +#193700 = ORIENTED_EDGE('',*,*,#193701,.T.); +#193701 = EDGE_CURVE('',#193671,#193702,#193704,.T.); +#193702 = VERTEX_POINT('',#193703); +#193703 = CARTESIAN_POINT('',(140.801921,-115.655906,-3.5E-02)); +#193704 = LINE('',#193705,#193706); +#193705 = CARTESIAN_POINT('',(140.816853,-115.691954,-3.5E-02)); +#193706 = VECTOR('',#193707,1.); +#193707 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193708 = ORIENTED_EDGE('',*,*,#193709,.F.); +#193709 = EDGE_CURVE('',#193710,#193702,#193712,.T.); +#193710 = VERTEX_POINT('',#193711); +#193711 = CARTESIAN_POINT('',(140.801921,-115.655906,0.)); +#193712 = LINE('',#193713,#193714); +#193713 = CARTESIAN_POINT('',(140.801921,-115.655906,0.)); +#193714 = VECTOR('',#193715,1.); +#193715 = DIRECTION('',(0.,0.,-1.)); +#193716 = ORIENTED_EDGE('',*,*,#193717,.F.); +#193717 = EDGE_CURVE('',#193679,#193710,#193718,.T.); +#193718 = LINE('',#193719,#193720); +#193719 = CARTESIAN_POINT('',(140.816853,-115.691954,0.)); +#193720 = VECTOR('',#193721,1.); +#193721 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193722 = PLANE('',#193723); +#193723 = AXIS2_PLACEMENT_3D('',#193724,#193725,#193726); +#193724 = CARTESIAN_POINT('',(140.816853,-115.691954,0.)); +#193725 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#193726 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#193727 = ADVANCED_FACE('',(#193728),#193753,.F.); +#193728 = FACE_BOUND('',#193729,.F.); +#193729 = EDGE_LOOP('',(#193730,#193731,#193739,#193747)); +#193730 = ORIENTED_EDGE('',*,*,#193709,.T.); +#193731 = ORIENTED_EDGE('',*,*,#193732,.T.); +#193732 = EDGE_CURVE('',#193702,#193733,#193735,.T.); +#193733 = VERTEX_POINT('',#193734); +#193734 = CARTESIAN_POINT('',(140.8,-115.634313,-3.5E-02)); +#193735 = LINE('',#193736,#193737); +#193736 = CARTESIAN_POINT('',(140.801921,-115.655906,-3.5E-02)); +#193737 = VECTOR('',#193738,1.); +#193738 = DIRECTION('',(-8.861403508925E-02,0.996066038366,0.)); +#193739 = ORIENTED_EDGE('',*,*,#193740,.F.); +#193740 = EDGE_CURVE('',#193741,#193733,#193743,.T.); +#193741 = VERTEX_POINT('',#193742); +#193742 = CARTESIAN_POINT('',(140.8,-115.634313,0.)); +#193743 = LINE('',#193744,#193745); +#193744 = CARTESIAN_POINT('',(140.8,-115.634313,0.)); +#193745 = VECTOR('',#193746,1.); +#193746 = DIRECTION('',(0.,0.,-1.)); +#193747 = ORIENTED_EDGE('',*,*,#193748,.F.); +#193748 = EDGE_CURVE('',#193710,#193741,#193749,.T.); +#193749 = LINE('',#193750,#193751); +#193750 = CARTESIAN_POINT('',(140.801921,-115.655906,0.)); +#193751 = VECTOR('',#193752,1.); +#193752 = DIRECTION('',(-8.861403508925E-02,0.996066038366,0.)); +#193753 = PLANE('',#193754); +#193754 = AXIS2_PLACEMENT_3D('',#193755,#193756,#193757); +#193755 = CARTESIAN_POINT('',(140.801921,-115.655906,0.)); +#193756 = DIRECTION('',(0.996066038366,8.861403508925E-02,0.)); +#193757 = DIRECTION('',(-8.861403508925E-02,0.996066038366,0.)); +#193758 = ADVANCED_FACE('',(#193759),#193784,.F.); +#193759 = FACE_BOUND('',#193760,.F.); +#193760 = EDGE_LOOP('',(#193761,#193762,#193770,#193778)); +#193761 = ORIENTED_EDGE('',*,*,#193740,.T.); +#193762 = ORIENTED_EDGE('',*,*,#193763,.T.); +#193763 = EDGE_CURVE('',#193733,#193764,#193766,.T.); +#193764 = VERTEX_POINT('',#193765); +#193765 = CARTESIAN_POINT('',(140.740686,-115.575,-3.5E-02)); +#193766 = LINE('',#193767,#193768); +#193767 = CARTESIAN_POINT('',(140.8,-115.634313,-3.5E-02)); +#193768 = VECTOR('',#193769,1.); +#193769 = DIRECTION('',(-0.707112741919,0.707100820404,0.)); +#193770 = ORIENTED_EDGE('',*,*,#193771,.F.); +#193771 = EDGE_CURVE('',#193772,#193764,#193774,.T.); +#193772 = VERTEX_POINT('',#193773); +#193773 = CARTESIAN_POINT('',(140.740686,-115.575,0.)); +#193774 = LINE('',#193775,#193776); +#193775 = CARTESIAN_POINT('',(140.740686,-115.575,0.)); +#193776 = VECTOR('',#193777,1.); +#193777 = DIRECTION('',(0.,0.,-1.)); +#193778 = ORIENTED_EDGE('',*,*,#193779,.F.); +#193779 = EDGE_CURVE('',#193741,#193772,#193780,.T.); +#193780 = LINE('',#193781,#193782); +#193781 = CARTESIAN_POINT('',(140.8,-115.634313,0.)); +#193782 = VECTOR('',#193783,1.); +#193783 = DIRECTION('',(-0.707112741919,0.707100820404,0.)); +#193784 = PLANE('',#193785); +#193785 = AXIS2_PLACEMENT_3D('',#193786,#193787,#193788); +#193786 = CARTESIAN_POINT('',(140.8,-115.634313,0.)); +#193787 = DIRECTION('',(0.707100820404,0.707112741919,0.)); +#193788 = DIRECTION('',(-0.707112741919,0.707100820404,0.)); +#193789 = ADVANCED_FACE('',(#193790),#193815,.F.); +#193790 = FACE_BOUND('',#193791,.F.); +#193791 = EDGE_LOOP('',(#193792,#193793,#193801,#193809)); +#193792 = ORIENTED_EDGE('',*,*,#193771,.T.); +#193793 = ORIENTED_EDGE('',*,*,#193794,.T.); +#193794 = EDGE_CURVE('',#193764,#193795,#193797,.T.); +#193795 = VERTEX_POINT('',#193796); +#193796 = CARTESIAN_POINT('',(134.582108,-115.575,-3.5E-02)); +#193797 = LINE('',#193798,#193799); +#193798 = CARTESIAN_POINT('',(140.740686,-115.575,-3.5E-02)); +#193799 = VECTOR('',#193800,1.); +#193800 = DIRECTION('',(-1.,0.,0.)); +#193801 = ORIENTED_EDGE('',*,*,#193802,.F.); +#193802 = EDGE_CURVE('',#193803,#193795,#193805,.T.); +#193803 = VERTEX_POINT('',#193804); +#193804 = CARTESIAN_POINT('',(134.582108,-115.575,0.)); +#193805 = LINE('',#193806,#193807); +#193806 = CARTESIAN_POINT('',(134.582108,-115.575,0.)); +#193807 = VECTOR('',#193808,1.); +#193808 = DIRECTION('',(0.,0.,-1.)); +#193809 = ORIENTED_EDGE('',*,*,#193810,.F.); +#193810 = EDGE_CURVE('',#193772,#193803,#193811,.T.); +#193811 = LINE('',#193812,#193813); +#193812 = CARTESIAN_POINT('',(140.740686,-115.575,0.)); +#193813 = VECTOR('',#193814,1.); +#193814 = DIRECTION('',(-1.,0.,0.)); +#193815 = PLANE('',#193816); +#193816 = AXIS2_PLACEMENT_3D('',#193817,#193818,#193819); +#193817 = CARTESIAN_POINT('',(140.740686,-115.575,0.)); +#193818 = DIRECTION('',(0.,1.,0.)); +#193819 = DIRECTION('',(-1.,0.,0.)); +#193820 = ADVANCED_FACE('',(#193821),#193846,.F.); +#193821 = FACE_BOUND('',#193822,.F.); +#193822 = EDGE_LOOP('',(#193823,#193824,#193832,#193840)); +#193823 = ORIENTED_EDGE('',*,*,#193802,.T.); +#193824 = ORIENTED_EDGE('',*,*,#193825,.T.); +#193825 = EDGE_CURVE('',#193795,#193826,#193828,.T.); +#193826 = VERTEX_POINT('',#193827); +#193827 = CARTESIAN_POINT('',(134.434314,-115.722794,-3.5E-02)); +#193828 = LINE('',#193829,#193830); +#193829 = CARTESIAN_POINT('',(134.582108,-115.575,-3.5E-02)); +#193830 = VECTOR('',#193831,1.); +#193831 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193832 = ORIENTED_EDGE('',*,*,#193833,.F.); +#193833 = EDGE_CURVE('',#193834,#193826,#193836,.T.); +#193834 = VERTEX_POINT('',#193835); +#193835 = CARTESIAN_POINT('',(134.434314,-115.722794,0.)); +#193836 = LINE('',#193837,#193838); +#193837 = CARTESIAN_POINT('',(134.434314,-115.722794,0.)); +#193838 = VECTOR('',#193839,1.); +#193839 = DIRECTION('',(0.,0.,-1.)); +#193840 = ORIENTED_EDGE('',*,*,#193841,.F.); +#193841 = EDGE_CURVE('',#193803,#193834,#193842,.T.); +#193842 = LINE('',#193843,#193844); +#193843 = CARTESIAN_POINT('',(134.582108,-115.575,0.)); +#193844 = VECTOR('',#193845,1.); +#193845 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193846 = PLANE('',#193847); +#193847 = AXIS2_PLACEMENT_3D('',#193848,#193849,#193850); +#193848 = CARTESIAN_POINT('',(134.582108,-115.575,0.)); +#193849 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#193850 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#193851 = ADVANCED_FACE('',(#193852),#193877,.F.); +#193852 = FACE_BOUND('',#193853,.F.); +#193853 = EDGE_LOOP('',(#193854,#193855,#193863,#193871)); +#193854 = ORIENTED_EDGE('',*,*,#193833,.T.); +#193855 = ORIENTED_EDGE('',*,*,#193856,.T.); +#193856 = EDGE_CURVE('',#193826,#193857,#193859,.T.); +#193857 = VERTEX_POINT('',#193858); +#193858 = CARTESIAN_POINT('',(134.432393,-116.185195,-3.5E-02)); +#193859 = LINE('',#193860,#193861); +#193860 = CARTESIAN_POINT('',(134.434314,-115.722794,-3.5E-02)); +#193861 = VECTOR('',#193862,1.); +#193862 = DIRECTION('',(-4.154366930208E-03,-0.99999137058,0.)); +#193863 = ORIENTED_EDGE('',*,*,#193864,.F.); +#193864 = EDGE_CURVE('',#193865,#193857,#193867,.T.); +#193865 = VERTEX_POINT('',#193866); +#193866 = CARTESIAN_POINT('',(134.432393,-116.185195,0.)); +#193867 = LINE('',#193868,#193869); +#193868 = CARTESIAN_POINT('',(134.432393,-116.185195,0.)); +#193869 = VECTOR('',#193870,1.); +#193870 = DIRECTION('',(0.,0.,-1.)); +#193871 = ORIENTED_EDGE('',*,*,#193872,.F.); +#193872 = EDGE_CURVE('',#193834,#193865,#193873,.T.); +#193873 = LINE('',#193874,#193875); +#193874 = CARTESIAN_POINT('',(134.434314,-115.722794,0.)); +#193875 = VECTOR('',#193876,1.); +#193876 = DIRECTION('',(-4.154366930208E-03,-0.99999137058,0.)); +#193877 = PLANE('',#193878); +#193878 = AXIS2_PLACEMENT_3D('',#193879,#193880,#193881); +#193879 = CARTESIAN_POINT('',(134.434314,-115.722794,0.)); +#193880 = DIRECTION('',(-0.99999137058,4.154366930208E-03,0.)); +#193881 = DIRECTION('',(-4.154366930208E-03,-0.99999137058,0.)); +#193882 = ADVANCED_FACE('',(#193883),#193908,.F.); +#193883 = FACE_BOUND('',#193884,.F.); +#193884 = EDGE_LOOP('',(#193885,#193886,#193894,#193902)); +#193885 = ORIENTED_EDGE('',*,*,#193864,.T.); +#193886 = ORIENTED_EDGE('',*,*,#193887,.T.); +#193887 = EDGE_CURVE('',#193857,#193888,#193890,.T.); +#193888 = VERTEX_POINT('',#193889); +#193889 = CARTESIAN_POINT('',(134.417461,-116.221243,-3.5E-02)); +#193890 = LINE('',#193891,#193892); +#193891 = CARTESIAN_POINT('',(134.432393,-116.185195,-3.5E-02)); +#193892 = VECTOR('',#193893,1.); +#193893 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193894 = ORIENTED_EDGE('',*,*,#193895,.F.); +#193895 = EDGE_CURVE('',#193896,#193888,#193898,.T.); +#193896 = VERTEX_POINT('',#193897); +#193897 = CARTESIAN_POINT('',(134.417461,-116.221243,0.)); +#193898 = LINE('',#193899,#193900); +#193899 = CARTESIAN_POINT('',(134.417461,-116.221243,0.)); +#193900 = VECTOR('',#193901,1.); +#193901 = DIRECTION('',(0.,0.,-1.)); +#193902 = ORIENTED_EDGE('',*,*,#193903,.F.); +#193903 = EDGE_CURVE('',#193865,#193896,#193904,.T.); +#193904 = LINE('',#193905,#193906); +#193905 = CARTESIAN_POINT('',(134.432393,-116.185195,0.)); +#193906 = VECTOR('',#193907,1.); +#193907 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193908 = PLANE('',#193909); +#193909 = AXIS2_PLACEMENT_3D('',#193910,#193911,#193912); +#193910 = CARTESIAN_POINT('',(134.432393,-116.185195,0.)); +#193911 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#193912 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193913 = ADVANCED_FACE('',(#193914),#193939,.F.); +#193914 = FACE_BOUND('',#193915,.F.); +#193915 = EDGE_LOOP('',(#193916,#193917,#193925,#193933)); +#193916 = ORIENTED_EDGE('',*,*,#193895,.T.); +#193917 = ORIENTED_EDGE('',*,*,#193918,.T.); +#193918 = EDGE_CURVE('',#193888,#193919,#193921,.T.); +#193919 = VERTEX_POINT('',#193920); +#193920 = CARTESIAN_POINT('',(134.2,-116.441422,-3.5E-02)); +#193921 = LINE('',#193922,#193923); +#193922 = CARTESIAN_POINT('',(134.417461,-116.221243,-3.5E-02)); +#193923 = VECTOR('',#193924,1.); +#193924 = DIRECTION('',(-0.702701683149,-0.711484605947,0.)); +#193925 = ORIENTED_EDGE('',*,*,#193926,.F.); +#193926 = EDGE_CURVE('',#193927,#193919,#193929,.T.); +#193927 = VERTEX_POINT('',#193928); +#193928 = CARTESIAN_POINT('',(134.2,-116.441422,0.)); +#193929 = LINE('',#193930,#193931); +#193930 = CARTESIAN_POINT('',(134.2,-116.441422,0.)); +#193931 = VECTOR('',#193932,1.); +#193932 = DIRECTION('',(0.,0.,-1.)); +#193933 = ORIENTED_EDGE('',*,*,#193934,.F.); +#193934 = EDGE_CURVE('',#193896,#193927,#193935,.T.); +#193935 = LINE('',#193936,#193937); +#193936 = CARTESIAN_POINT('',(134.417461,-116.221243,0.)); +#193937 = VECTOR('',#193938,1.); +#193938 = DIRECTION('',(-0.702701683149,-0.711484605947,0.)); +#193939 = PLANE('',#193940); +#193940 = AXIS2_PLACEMENT_3D('',#193941,#193942,#193943); +#193941 = CARTESIAN_POINT('',(134.417461,-116.221243,0.)); +#193942 = DIRECTION('',(-0.711484605947,0.702701683149,0.)); +#193943 = DIRECTION('',(-0.702701683149,-0.711484605947,0.)); +#193944 = ADVANCED_FACE('',(#193945),#193970,.F.); +#193945 = FACE_BOUND('',#193946,.F.); +#193946 = EDGE_LOOP('',(#193947,#193948,#193956,#193964)); +#193947 = ORIENTED_EDGE('',*,*,#193926,.T.); +#193948 = ORIENTED_EDGE('',*,*,#193949,.T.); +#193949 = EDGE_CURVE('',#193919,#193950,#193952,.T.); +#193950 = VERTEX_POINT('',#193951); +#193951 = CARTESIAN_POINT('',(134.198079,-116.668038,-3.5E-02)); +#193952 = LINE('',#193953,#193954); +#193953 = CARTESIAN_POINT('',(134.2,-116.441422,-3.5E-02)); +#193954 = VECTOR('',#193955,1.); +#193955 = DIRECTION('',(-8.47659028637E-03,-0.999964073063,0.)); +#193956 = ORIENTED_EDGE('',*,*,#193957,.F.); +#193957 = EDGE_CURVE('',#193958,#193950,#193960,.T.); +#193958 = VERTEX_POINT('',#193959); +#193959 = CARTESIAN_POINT('',(134.198079,-116.668038,0.)); +#193960 = LINE('',#193961,#193962); +#193961 = CARTESIAN_POINT('',(134.198079,-116.668038,0.)); +#193962 = VECTOR('',#193963,1.); +#193963 = DIRECTION('',(0.,0.,-1.)); +#193964 = ORIENTED_EDGE('',*,*,#193965,.F.); +#193965 = EDGE_CURVE('',#193927,#193958,#193966,.T.); +#193966 = LINE('',#193967,#193968); +#193967 = CARTESIAN_POINT('',(134.2,-116.441422,0.)); +#193968 = VECTOR('',#193969,1.); +#193969 = DIRECTION('',(-8.47659028637E-03,-0.999964073063,0.)); +#193970 = PLANE('',#193971); +#193971 = AXIS2_PLACEMENT_3D('',#193972,#193973,#193974); +#193972 = CARTESIAN_POINT('',(134.2,-116.441422,0.)); +#193973 = DIRECTION('',(-0.999964073063,8.47659028637E-03,0.)); +#193974 = DIRECTION('',(-8.47659028637E-03,-0.999964073063,0.)); +#193975 = ADVANCED_FACE('',(#193976),#194001,.F.); +#193976 = FACE_BOUND('',#193977,.F.); +#193977 = EDGE_LOOP('',(#193978,#193979,#193987,#193995)); +#193978 = ORIENTED_EDGE('',*,*,#193957,.T.); +#193979 = ORIENTED_EDGE('',*,*,#193980,.T.); +#193980 = EDGE_CURVE('',#193950,#193981,#193983,.T.); +#193981 = VERTEX_POINT('',#193982); +#193982 = CARTESIAN_POINT('',(134.183147,-116.704086,-3.5E-02)); +#193983 = LINE('',#193984,#193985); +#193984 = CARTESIAN_POINT('',(134.198079,-116.668038,-3.5E-02)); +#193985 = VECTOR('',#193986,1.); +#193986 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#193987 = ORIENTED_EDGE('',*,*,#193988,.F.); +#193988 = EDGE_CURVE('',#193989,#193981,#193991,.T.); +#193989 = VERTEX_POINT('',#193990); +#193990 = CARTESIAN_POINT('',(134.183147,-116.704086,0.)); +#193991 = LINE('',#193992,#193993); +#193992 = CARTESIAN_POINT('',(134.183147,-116.704086,0.)); +#193993 = VECTOR('',#193994,1.); +#193994 = DIRECTION('',(0.,0.,-1.)); +#193995 = ORIENTED_EDGE('',*,*,#193996,.F.); +#193996 = EDGE_CURVE('',#193958,#193989,#193997,.T.); +#193997 = LINE('',#193998,#193999); +#193998 = CARTESIAN_POINT('',(134.198079,-116.668038,0.)); +#193999 = VECTOR('',#194000,1.); +#194000 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#194001 = PLANE('',#194002); +#194002 = AXIS2_PLACEMENT_3D('',#194003,#194004,#194005); +#194003 = CARTESIAN_POINT('',(134.198079,-116.668038,0.)); +#194004 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#194005 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#194006 = ADVANCED_FACE('',(#194007),#194032,.F.); +#194007 = FACE_BOUND('',#194008,.F.); +#194008 = EDGE_LOOP('',(#194009,#194010,#194018,#194026)); +#194009 = ORIENTED_EDGE('',*,*,#193988,.T.); +#194010 = ORIENTED_EDGE('',*,*,#194011,.T.); +#194011 = EDGE_CURVE('',#193981,#194012,#194014,.T.); +#194012 = VERTEX_POINT('',#194013); +#194013 = CARTESIAN_POINT('',(133.804086,-117.083147,-3.5E-02)); +#194014 = LINE('',#194015,#194016); +#194015 = CARTESIAN_POINT('',(134.183147,-116.704086,-3.5E-02)); +#194016 = VECTOR('',#194017,1.); +#194017 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194018 = ORIENTED_EDGE('',*,*,#194019,.F.); +#194019 = EDGE_CURVE('',#194020,#194012,#194022,.T.); +#194020 = VERTEX_POINT('',#194021); +#194021 = CARTESIAN_POINT('',(133.804086,-117.083147,0.)); +#194022 = LINE('',#194023,#194024); +#194023 = CARTESIAN_POINT('',(133.804086,-117.083147,0.)); +#194024 = VECTOR('',#194025,1.); +#194025 = DIRECTION('',(0.,0.,-1.)); +#194026 = ORIENTED_EDGE('',*,*,#194027,.F.); +#194027 = EDGE_CURVE('',#193989,#194020,#194028,.T.); +#194028 = LINE('',#194029,#194030); +#194029 = CARTESIAN_POINT('',(134.183147,-116.704086,0.)); +#194030 = VECTOR('',#194031,1.); +#194031 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194032 = PLANE('',#194033); +#194033 = AXIS2_PLACEMENT_3D('',#194034,#194035,#194036); +#194034 = CARTESIAN_POINT('',(134.183147,-116.704086,0.)); +#194035 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#194036 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194037 = ADVANCED_FACE('',(#194038),#194063,.F.); +#194038 = FACE_BOUND('',#194039,.F.); +#194039 = EDGE_LOOP('',(#194040,#194041,#194049,#194057)); +#194040 = ORIENTED_EDGE('',*,*,#194019,.T.); +#194041 = ORIENTED_EDGE('',*,*,#194042,.T.); +#194042 = EDGE_CURVE('',#194012,#194043,#194045,.T.); +#194043 = VERTEX_POINT('',#194044); +#194044 = CARTESIAN_POINT('',(133.768038,-117.098079,-3.5E-02)); +#194045 = LINE('',#194046,#194047); +#194046 = CARTESIAN_POINT('',(133.804086,-117.083147,-3.5E-02)); +#194047 = VECTOR('',#194048,1.); +#194048 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#194049 = ORIENTED_EDGE('',*,*,#194050,.F.); +#194050 = EDGE_CURVE('',#194051,#194043,#194053,.T.); +#194051 = VERTEX_POINT('',#194052); +#194052 = CARTESIAN_POINT('',(133.768038,-117.098079,0.)); +#194053 = LINE('',#194054,#194055); +#194054 = CARTESIAN_POINT('',(133.768038,-117.098079,0.)); +#194055 = VECTOR('',#194056,1.); +#194056 = DIRECTION('',(0.,0.,-1.)); +#194057 = ORIENTED_EDGE('',*,*,#194058,.F.); +#194058 = EDGE_CURVE('',#194020,#194051,#194059,.T.); +#194059 = LINE('',#194060,#194061); +#194060 = CARTESIAN_POINT('',(133.804086,-117.083147,0.)); +#194061 = VECTOR('',#194062,1.); +#194062 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#194063 = PLANE('',#194064); +#194064 = AXIS2_PLACEMENT_3D('',#194065,#194066,#194067); +#194065 = CARTESIAN_POINT('',(133.804086,-117.083147,0.)); +#194066 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#194067 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#194068 = ADVANCED_FACE('',(#194069),#194094,.F.); +#194069 = FACE_BOUND('',#194070,.F.); +#194070 = EDGE_LOOP('',(#194071,#194072,#194080,#194088)); +#194071 = ORIENTED_EDGE('',*,*,#194050,.T.); +#194072 = ORIENTED_EDGE('',*,*,#194073,.T.); +#194073 = EDGE_CURVE('',#194043,#194074,#194076,.T.); +#194074 = VERTEX_POINT('',#194075); +#194075 = CARTESIAN_POINT('',(129.640491,-117.098079,-3.5E-02)); +#194076 = LINE('',#194077,#194078); +#194077 = CARTESIAN_POINT('',(133.768038,-117.098079,-3.5E-02)); +#194078 = VECTOR('',#194079,1.); +#194079 = DIRECTION('',(-1.,0.,0.)); +#194080 = ORIENTED_EDGE('',*,*,#194081,.F.); +#194081 = EDGE_CURVE('',#194082,#194074,#194084,.T.); +#194082 = VERTEX_POINT('',#194083); +#194083 = CARTESIAN_POINT('',(129.640491,-117.098079,0.)); +#194084 = LINE('',#194085,#194086); +#194085 = CARTESIAN_POINT('',(129.640491,-117.098079,0.)); +#194086 = VECTOR('',#194087,1.); +#194087 = DIRECTION('',(0.,0.,-1.)); +#194088 = ORIENTED_EDGE('',*,*,#194089,.F.); +#194089 = EDGE_CURVE('',#194051,#194082,#194090,.T.); +#194090 = LINE('',#194091,#194092); +#194091 = CARTESIAN_POINT('',(133.768038,-117.098079,0.)); +#194092 = VECTOR('',#194093,1.); +#194093 = DIRECTION('',(-1.,0.,0.)); +#194094 = PLANE('',#194095); +#194095 = AXIS2_PLACEMENT_3D('',#194096,#194097,#194098); +#194096 = CARTESIAN_POINT('',(133.768038,-117.098079,0.)); +#194097 = DIRECTION('',(0.,1.,0.)); +#194098 = DIRECTION('',(-1.,0.,0.)); +#194099 = ADVANCED_FACE('',(#194100),#194125,.F.); +#194100 = FACE_BOUND('',#194101,.F.); +#194101 = EDGE_LOOP('',(#194102,#194103,#194111,#194119)); +#194102 = ORIENTED_EDGE('',*,*,#194081,.T.); +#194103 = ORIENTED_EDGE('',*,*,#194104,.T.); +#194104 = EDGE_CURVE('',#194074,#194105,#194107,.T.); +#194105 = VERTEX_POINT('',#194106); +#194106 = CARTESIAN_POINT('',(129.604443,-117.083147,-3.5E-02)); +#194107 = LINE('',#194108,#194109); +#194108 = CARTESIAN_POINT('',(129.640491,-117.098079,-3.5E-02)); +#194109 = VECTOR('',#194110,1.); +#194110 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#194111 = ORIENTED_EDGE('',*,*,#194112,.F.); +#194112 = EDGE_CURVE('',#194113,#194105,#194115,.T.); +#194113 = VERTEX_POINT('',#194114); +#194114 = CARTESIAN_POINT('',(129.604443,-117.083147,0.)); +#194115 = LINE('',#194116,#194117); +#194116 = CARTESIAN_POINT('',(129.604443,-117.083147,0.)); +#194117 = VECTOR('',#194118,1.); +#194118 = DIRECTION('',(0.,0.,-1.)); +#194119 = ORIENTED_EDGE('',*,*,#194120,.F.); +#194120 = EDGE_CURVE('',#194082,#194113,#194121,.T.); +#194121 = LINE('',#194122,#194123); +#194122 = CARTESIAN_POINT('',(129.640491,-117.098079,0.)); +#194123 = VECTOR('',#194124,1.); +#194124 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#194125 = PLANE('',#194126); +#194126 = AXIS2_PLACEMENT_3D('',#194127,#194128,#194129); +#194127 = CARTESIAN_POINT('',(129.640491,-117.098079,0.)); +#194128 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194129 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#194130 = ADVANCED_FACE('',(#194131),#194156,.F.); +#194131 = FACE_BOUND('',#194132,.F.); +#194132 = EDGE_LOOP('',(#194133,#194134,#194142,#194150)); +#194133 = ORIENTED_EDGE('',*,*,#194112,.T.); +#194134 = ORIENTED_EDGE('',*,*,#194135,.T.); +#194135 = EDGE_CURVE('',#194105,#194136,#194138,.T.); +#194136 = VERTEX_POINT('',#194137); +#194137 = CARTESIAN_POINT('',(129.219606,-116.701028,-3.5E-02)); +#194138 = LINE('',#194139,#194140); +#194139 = CARTESIAN_POINT('',(129.604443,-117.083147,-3.5E-02)); +#194140 = VECTOR('',#194141,1.); +#194141 = DIRECTION('',(-0.709608226738,0.704596455104,0.)); +#194142 = ORIENTED_EDGE('',*,*,#194143,.F.); +#194143 = EDGE_CURVE('',#194144,#194136,#194146,.T.); +#194144 = VERTEX_POINT('',#194145); +#194145 = CARTESIAN_POINT('',(129.219606,-116.701028,0.)); +#194146 = LINE('',#194147,#194148); +#194147 = CARTESIAN_POINT('',(129.219606,-116.701028,0.)); +#194148 = VECTOR('',#194149,1.); +#194149 = DIRECTION('',(0.,0.,-1.)); +#194150 = ORIENTED_EDGE('',*,*,#194151,.F.); +#194151 = EDGE_CURVE('',#194113,#194144,#194152,.T.); +#194152 = LINE('',#194153,#194154); +#194153 = CARTESIAN_POINT('',(129.604443,-117.083147,0.)); +#194154 = VECTOR('',#194155,1.); +#194155 = DIRECTION('',(-0.709608226738,0.704596455104,0.)); +#194156 = PLANE('',#194157); +#194157 = AXIS2_PLACEMENT_3D('',#194158,#194159,#194160); +#194158 = CARTESIAN_POINT('',(129.604443,-117.083147,0.)); +#194159 = DIRECTION('',(0.704596455104,0.709608226738,0.)); +#194160 = DIRECTION('',(-0.709608226738,0.704596455104,0.)); +#194161 = ADVANCED_FACE('',(#194162),#194187,.F.); +#194162 = FACE_BOUND('',#194163,.F.); +#194163 = EDGE_LOOP('',(#194164,#194165,#194173,#194181)); +#194164 = ORIENTED_EDGE('',*,*,#194143,.T.); +#194165 = ORIENTED_EDGE('',*,*,#194166,.T.); +#194166 = EDGE_CURVE('',#194136,#194167,#194169,.T.); +#194167 = VERTEX_POINT('',#194168); +#194168 = CARTESIAN_POINT('',(129.182628,-116.738006,-3.5E-02)); +#194169 = LINE('',#194170,#194171); +#194170 = CARTESIAN_POINT('',(129.219606,-116.701028,-3.5E-02)); +#194171 = VECTOR('',#194172,1.); +#194172 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194173 = ORIENTED_EDGE('',*,*,#194174,.F.); +#194174 = EDGE_CURVE('',#194175,#194167,#194177,.T.); +#194175 = VERTEX_POINT('',#194176); +#194176 = CARTESIAN_POINT('',(129.182628,-116.738006,0.)); +#194177 = LINE('',#194178,#194179); +#194178 = CARTESIAN_POINT('',(129.182628,-116.738006,0.)); +#194179 = VECTOR('',#194180,1.); +#194180 = DIRECTION('',(0.,0.,-1.)); +#194181 = ORIENTED_EDGE('',*,*,#194182,.F.); +#194182 = EDGE_CURVE('',#194144,#194175,#194183,.T.); +#194183 = LINE('',#194184,#194185); +#194184 = CARTESIAN_POINT('',(129.219606,-116.701028,0.)); +#194185 = VECTOR('',#194186,1.); +#194186 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194187 = PLANE('',#194188); +#194188 = AXIS2_PLACEMENT_3D('',#194189,#194190,#194191); +#194189 = CARTESIAN_POINT('',(129.219606,-116.701028,0.)); +#194190 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#194191 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#194192 = ADVANCED_FACE('',(#194193),#194220,.T.); +#194193 = FACE_BOUND('',#194194,.F.); +#194194 = EDGE_LOOP('',(#194195,#194196,#194205,#194213)); +#194195 = ORIENTED_EDGE('',*,*,#194174,.T.); +#194196 = ORIENTED_EDGE('',*,*,#194197,.T.); +#194197 = EDGE_CURVE('',#194167,#194198,#194200,.T.); +#194198 = VERTEX_POINT('',#194199); +#194199 = CARTESIAN_POINT('',(129.297433,-116.460842,-3.5E-02)); +#194200 = CIRCLE('',#194201,0.299999867683); +#194201 = AXIS2_PLACEMENT_3D('',#194202,#194203,#194204); +#194202 = CARTESIAN_POINT('',(128.99999970224,-116.5000000642,-3.5E-02) + ); +#194203 = DIRECTION('',(0.,0.,-1.)); +#194204 = DIRECTION('',(0.608761261032,-0.793353469185,0.)); +#194205 = ORIENTED_EDGE('',*,*,#194206,.F.); +#194206 = EDGE_CURVE('',#194207,#194198,#194209,.T.); +#194207 = VERTEX_POINT('',#194208); +#194208 = CARTESIAN_POINT('',(129.297433,-116.460842,0.)); +#194209 = LINE('',#194210,#194211); +#194210 = CARTESIAN_POINT('',(129.297433,-116.460842,0.)); +#194211 = VECTOR('',#194212,1.); +#194212 = DIRECTION('',(0.,0.,-1.)); +#194213 = ORIENTED_EDGE('',*,*,#194214,.F.); +#194214 = EDGE_CURVE('',#194175,#194207,#194215,.T.); +#194215 = CIRCLE('',#194216,0.299999867683); +#194216 = AXIS2_PLACEMENT_3D('',#194217,#194218,#194219); +#194217 = CARTESIAN_POINT('',(128.99999970224,-116.5000000642,0.)); +#194218 = DIRECTION('',(0.,0.,-1.)); +#194219 = DIRECTION('',(0.608761261032,-0.793353469185,0.)); +#194220 = CYLINDRICAL_SURFACE('',#194221,0.299999867683); +#194221 = AXIS2_PLACEMENT_3D('',#194222,#194223,#194224); +#194222 = CARTESIAN_POINT('',(128.99999970224,-116.5000000642,0.)); +#194223 = DIRECTION('',(-0.,-0.,1.)); +#194224 = DIRECTION('',(0.608761261032,-0.793353469185,0.)); +#194225 = ADVANCED_FACE('',(#194226),#194251,.F.); +#194226 = FACE_BOUND('',#194227,.F.); +#194227 = EDGE_LOOP('',(#194228,#194229,#194237,#194245)); +#194228 = ORIENTED_EDGE('',*,*,#194206,.T.); +#194229 = ORIENTED_EDGE('',*,*,#194230,.T.); +#194230 = EDGE_CURVE('',#194198,#194231,#194233,.T.); +#194231 = VERTEX_POINT('',#194232); +#194232 = CARTESIAN_POINT('',(129.297433,-116.496011,-3.5E-02)); +#194233 = LINE('',#194234,#194235); +#194234 = CARTESIAN_POINT('',(129.297433,-116.460842,-3.5E-02)); +#194235 = VECTOR('',#194236,1.); +#194236 = DIRECTION('',(0.,-1.,0.)); +#194237 = ORIENTED_EDGE('',*,*,#194238,.F.); +#194238 = EDGE_CURVE('',#194239,#194231,#194241,.T.); +#194239 = VERTEX_POINT('',#194240); +#194240 = CARTESIAN_POINT('',(129.297433,-116.496011,0.)); +#194241 = LINE('',#194242,#194243); +#194242 = CARTESIAN_POINT('',(129.297433,-116.496011,0.)); +#194243 = VECTOR('',#194244,1.); +#194244 = DIRECTION('',(0.,0.,-1.)); +#194245 = ORIENTED_EDGE('',*,*,#194246,.F.); +#194246 = EDGE_CURVE('',#194207,#194239,#194247,.T.); +#194247 = LINE('',#194248,#194249); +#194248 = CARTESIAN_POINT('',(129.297433,-116.460842,0.)); +#194249 = VECTOR('',#194250,1.); +#194250 = DIRECTION('',(0.,-1.,0.)); +#194251 = PLANE('',#194252); +#194252 = AXIS2_PLACEMENT_3D('',#194253,#194254,#194255); +#194253 = CARTESIAN_POINT('',(129.297433,-116.460842,0.)); +#194254 = DIRECTION('',(-1.,-0.,-0.)); +#194255 = DIRECTION('',(0.,-1.,0.)); +#194256 = ADVANCED_FACE('',(#194257),#194282,.F.); +#194257 = FACE_BOUND('',#194258,.F.); +#194258 = EDGE_LOOP('',(#194259,#194260,#194268,#194276)); +#194259 = ORIENTED_EDGE('',*,*,#194238,.T.); +#194260 = ORIENTED_EDGE('',*,*,#194261,.T.); +#194261 = EDGE_CURVE('',#194231,#194262,#194264,.T.); +#194262 = VERTEX_POINT('',#194263); +#194263 = CARTESIAN_POINT('',(129.701422,-116.9,-3.5E-02)); +#194264 = LINE('',#194265,#194266); +#194265 = CARTESIAN_POINT('',(129.297433,-116.496011,-3.5E-02)); +#194266 = VECTOR('',#194267,1.); +#194267 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194268 = ORIENTED_EDGE('',*,*,#194269,.F.); +#194269 = EDGE_CURVE('',#194270,#194262,#194272,.T.); +#194270 = VERTEX_POINT('',#194271); +#194271 = CARTESIAN_POINT('',(129.701422,-116.9,0.)); +#194272 = LINE('',#194273,#194274); +#194273 = CARTESIAN_POINT('',(129.701422,-116.9,0.)); +#194274 = VECTOR('',#194275,1.); +#194275 = DIRECTION('',(0.,0.,-1.)); +#194276 = ORIENTED_EDGE('',*,*,#194277,.F.); +#194277 = EDGE_CURVE('',#194239,#194270,#194278,.T.); +#194278 = LINE('',#194279,#194280); +#194279 = CARTESIAN_POINT('',(129.297433,-116.496011,0.)); +#194280 = VECTOR('',#194281,1.); +#194281 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194282 = PLANE('',#194283); +#194283 = AXIS2_PLACEMENT_3D('',#194284,#194285,#194286); +#194284 = CARTESIAN_POINT('',(129.297433,-116.496011,0.)); +#194285 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#194286 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194287 = ADVANCED_FACE('',(#194288),#194313,.F.); +#194288 = FACE_BOUND('',#194289,.F.); +#194289 = EDGE_LOOP('',(#194290,#194291,#194299,#194307)); +#194290 = ORIENTED_EDGE('',*,*,#194269,.T.); +#194291 = ORIENTED_EDGE('',*,*,#194292,.T.); +#194292 = EDGE_CURVE('',#194262,#194293,#194295,.T.); +#194293 = VERTEX_POINT('',#194294); +#194294 = CARTESIAN_POINT('',(133.707107,-116.9,-3.5E-02)); +#194295 = LINE('',#194296,#194297); +#194296 = CARTESIAN_POINT('',(129.701422,-116.9,-3.5E-02)); +#194297 = VECTOR('',#194298,1.); +#194298 = DIRECTION('',(1.,0.,0.)); +#194299 = ORIENTED_EDGE('',*,*,#194300,.F.); +#194300 = EDGE_CURVE('',#194301,#194293,#194303,.T.); +#194301 = VERTEX_POINT('',#194302); +#194302 = CARTESIAN_POINT('',(133.707107,-116.9,0.)); +#194303 = LINE('',#194304,#194305); +#194304 = CARTESIAN_POINT('',(133.707107,-116.9,0.)); +#194305 = VECTOR('',#194306,1.); +#194306 = DIRECTION('',(0.,0.,-1.)); +#194307 = ORIENTED_EDGE('',*,*,#194308,.F.); +#194308 = EDGE_CURVE('',#194270,#194301,#194309,.T.); +#194309 = LINE('',#194310,#194311); +#194310 = CARTESIAN_POINT('',(129.701422,-116.9,0.)); +#194311 = VECTOR('',#194312,1.); +#194312 = DIRECTION('',(1.,0.,0.)); +#194313 = PLANE('',#194314); +#194314 = AXIS2_PLACEMENT_3D('',#194315,#194316,#194317); +#194315 = CARTESIAN_POINT('',(129.701422,-116.9,0.)); +#194316 = DIRECTION('',(0.,-1.,0.)); +#194317 = DIRECTION('',(1.,0.,0.)); +#194318 = ADVANCED_FACE('',(#194319),#194344,.F.); +#194319 = FACE_BOUND('',#194320,.F.); +#194320 = EDGE_LOOP('',(#194321,#194322,#194330,#194338)); +#194321 = ORIENTED_EDGE('',*,*,#194300,.T.); +#194322 = ORIENTED_EDGE('',*,*,#194323,.T.); +#194323 = EDGE_CURVE('',#194293,#194324,#194326,.T.); +#194324 = VERTEX_POINT('',#194325); +#194325 = CARTESIAN_POINT('',(134.,-116.607107,-3.5E-02)); +#194326 = LINE('',#194327,#194328); +#194327 = CARTESIAN_POINT('',(133.707107,-116.9,-3.5E-02)); +#194328 = VECTOR('',#194329,1.); +#194329 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194330 = ORIENTED_EDGE('',*,*,#194331,.F.); +#194331 = EDGE_CURVE('',#194332,#194324,#194334,.T.); +#194332 = VERTEX_POINT('',#194333); +#194333 = CARTESIAN_POINT('',(134.,-116.607107,0.)); +#194334 = LINE('',#194335,#194336); +#194335 = CARTESIAN_POINT('',(134.,-116.607107,0.)); +#194336 = VECTOR('',#194337,1.); +#194337 = DIRECTION('',(0.,0.,-1.)); +#194338 = ORIENTED_EDGE('',*,*,#194339,.F.); +#194339 = EDGE_CURVE('',#194301,#194332,#194340,.T.); +#194340 = LINE('',#194341,#194342); +#194341 = CARTESIAN_POINT('',(133.707107,-116.9,0.)); +#194342 = VECTOR('',#194343,1.); +#194343 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194344 = PLANE('',#194345); +#194345 = AXIS2_PLACEMENT_3D('',#194346,#194347,#194348); +#194346 = CARTESIAN_POINT('',(133.707107,-116.9,0.)); +#194347 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194348 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194349 = ADVANCED_FACE('',(#194350),#194375,.F.); +#194350 = FACE_BOUND('',#194351,.F.); +#194351 = EDGE_LOOP('',(#194352,#194353,#194361,#194369)); +#194352 = ORIENTED_EDGE('',*,*,#194331,.T.); +#194353 = ORIENTED_EDGE('',*,*,#194354,.T.); +#194354 = EDGE_CURVE('',#194324,#194355,#194357,.T.); +#194355 = VERTEX_POINT('',#194356); +#194356 = CARTESIAN_POINT('',(134.001921,-116.380491,-3.5E-02)); +#194357 = LINE('',#194358,#194359); +#194358 = CARTESIAN_POINT('',(134.,-116.607107,-3.5E-02)); +#194359 = VECTOR('',#194360,1.); +#194360 = DIRECTION('',(8.476590286496E-03,0.999964073063,0.)); +#194361 = ORIENTED_EDGE('',*,*,#194362,.F.); +#194362 = EDGE_CURVE('',#194363,#194355,#194365,.T.); +#194363 = VERTEX_POINT('',#194364); +#194364 = CARTESIAN_POINT('',(134.001921,-116.380491,0.)); +#194365 = LINE('',#194366,#194367); +#194366 = CARTESIAN_POINT('',(134.001921,-116.380491,0.)); +#194367 = VECTOR('',#194368,1.); +#194368 = DIRECTION('',(0.,0.,-1.)); +#194369 = ORIENTED_EDGE('',*,*,#194370,.F.); +#194370 = EDGE_CURVE('',#194332,#194363,#194371,.T.); +#194371 = LINE('',#194372,#194373); +#194372 = CARTESIAN_POINT('',(134.,-116.607107,0.)); +#194373 = VECTOR('',#194374,1.); +#194374 = DIRECTION('',(8.476590286496E-03,0.999964073063,0.)); +#194375 = PLANE('',#194376); +#194376 = AXIS2_PLACEMENT_3D('',#194377,#194378,#194379); +#194377 = CARTESIAN_POINT('',(134.,-116.607107,0.)); +#194378 = DIRECTION('',(0.999964073063,-8.476590286496E-03,0.)); +#194379 = DIRECTION('',(8.476590286496E-03,0.999964073063,0.)); +#194380 = ADVANCED_FACE('',(#194381),#194406,.F.); +#194381 = FACE_BOUND('',#194382,.F.); +#194382 = EDGE_LOOP('',(#194383,#194384,#194392,#194400)); +#194383 = ORIENTED_EDGE('',*,*,#194362,.T.); +#194384 = ORIENTED_EDGE('',*,*,#194385,.T.); +#194385 = EDGE_CURVE('',#194355,#194386,#194388,.T.); +#194386 = VERTEX_POINT('',#194387); +#194387 = CARTESIAN_POINT('',(134.016853,-116.344443,-3.5E-02)); +#194388 = LINE('',#194389,#194390); +#194389 = CARTESIAN_POINT('',(134.001921,-116.380491,-3.5E-02)); +#194390 = VECTOR('',#194391,1.); +#194391 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194392 = ORIENTED_EDGE('',*,*,#194393,.F.); +#194393 = EDGE_CURVE('',#194394,#194386,#194396,.T.); +#194394 = VERTEX_POINT('',#194395); +#194395 = CARTESIAN_POINT('',(134.016853,-116.344443,0.)); +#194396 = LINE('',#194397,#194398); +#194397 = CARTESIAN_POINT('',(134.016853,-116.344443,0.)); +#194398 = VECTOR('',#194399,1.); +#194399 = DIRECTION('',(0.,0.,-1.)); +#194400 = ORIENTED_EDGE('',*,*,#194401,.F.); +#194401 = EDGE_CURVE('',#194363,#194394,#194402,.T.); +#194402 = LINE('',#194403,#194404); +#194403 = CARTESIAN_POINT('',(134.001921,-116.380491,0.)); +#194404 = VECTOR('',#194405,1.); +#194405 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194406 = PLANE('',#194407); +#194407 = AXIS2_PLACEMENT_3D('',#194408,#194409,#194410); +#194408 = CARTESIAN_POINT('',(134.001921,-116.380491,0.)); +#194409 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#194410 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194411 = ADVANCED_FACE('',(#194412),#194437,.F.); +#194412 = FACE_BOUND('',#194413,.F.); +#194413 = EDGE_LOOP('',(#194414,#194415,#194423,#194431)); +#194414 = ORIENTED_EDGE('',*,*,#194393,.T.); +#194415 = ORIENTED_EDGE('',*,*,#194416,.T.); +#194416 = EDGE_CURVE('',#194386,#194417,#194419,.T.); +#194417 = VERTEX_POINT('',#194418); +#194418 = CARTESIAN_POINT('',(134.234314,-116.124264,-3.5E-02)); +#194419 = LINE('',#194420,#194421); +#194420 = CARTESIAN_POINT('',(134.016853,-116.344443,-3.5E-02)); +#194421 = VECTOR('',#194422,1.); +#194422 = DIRECTION('',(0.702701683149,0.711484605947,0.)); +#194423 = ORIENTED_EDGE('',*,*,#194424,.F.); +#194424 = EDGE_CURVE('',#194425,#194417,#194427,.T.); +#194425 = VERTEX_POINT('',#194426); +#194426 = CARTESIAN_POINT('',(134.234314,-116.124264,0.)); +#194427 = LINE('',#194428,#194429); +#194428 = CARTESIAN_POINT('',(134.234314,-116.124264,0.)); +#194429 = VECTOR('',#194430,1.); +#194430 = DIRECTION('',(0.,0.,-1.)); +#194431 = ORIENTED_EDGE('',*,*,#194432,.F.); +#194432 = EDGE_CURVE('',#194394,#194425,#194433,.T.); +#194433 = LINE('',#194434,#194435); +#194434 = CARTESIAN_POINT('',(134.016853,-116.344443,0.)); +#194435 = VECTOR('',#194436,1.); +#194436 = DIRECTION('',(0.702701683149,0.711484605947,0.)); +#194437 = PLANE('',#194438); +#194438 = AXIS2_PLACEMENT_3D('',#194439,#194440,#194441); +#194439 = CARTESIAN_POINT('',(134.016853,-116.344443,0.)); +#194440 = DIRECTION('',(0.711484605947,-0.702701683149,0.)); +#194441 = DIRECTION('',(0.702701683149,0.711484605947,0.)); +#194442 = ADVANCED_FACE('',(#194443),#194468,.F.); +#194443 = FACE_BOUND('',#194444,.F.); +#194444 = EDGE_LOOP('',(#194445,#194446,#194454,#194462)); +#194445 = ORIENTED_EDGE('',*,*,#194424,.T.); +#194446 = ORIENTED_EDGE('',*,*,#194447,.T.); +#194447 = EDGE_CURVE('',#194417,#194448,#194450,.T.); +#194448 = VERTEX_POINT('',#194449); +#194449 = CARTESIAN_POINT('',(134.236235,-115.661863,-3.5E-02)); +#194450 = LINE('',#194451,#194452); +#194451 = CARTESIAN_POINT('',(134.234314,-116.124264,-3.5E-02)); +#194452 = VECTOR('',#194453,1.); +#194453 = DIRECTION('',(4.154366930147E-03,0.99999137058,0.)); +#194454 = ORIENTED_EDGE('',*,*,#194455,.F.); +#194455 = EDGE_CURVE('',#194456,#194448,#194458,.T.); +#194456 = VERTEX_POINT('',#194457); +#194457 = CARTESIAN_POINT('',(134.236235,-115.661863,0.)); +#194458 = LINE('',#194459,#194460); +#194459 = CARTESIAN_POINT('',(134.236235,-115.661863,0.)); +#194460 = VECTOR('',#194461,1.); +#194461 = DIRECTION('',(0.,0.,-1.)); +#194462 = ORIENTED_EDGE('',*,*,#194463,.F.); +#194463 = EDGE_CURVE('',#194425,#194456,#194464,.T.); +#194464 = LINE('',#194465,#194466); +#194465 = CARTESIAN_POINT('',(134.234314,-116.124264,0.)); +#194466 = VECTOR('',#194467,1.); +#194467 = DIRECTION('',(4.154366930147E-03,0.99999137058,0.)); +#194468 = PLANE('',#194469); +#194469 = AXIS2_PLACEMENT_3D('',#194470,#194471,#194472); +#194470 = CARTESIAN_POINT('',(134.234314,-116.124264,0.)); +#194471 = DIRECTION('',(0.99999137058,-4.154366930147E-03,0.)); +#194472 = DIRECTION('',(4.154366930147E-03,0.99999137058,0.)); +#194473 = ADVANCED_FACE('',(#194474),#194499,.F.); +#194474 = FACE_BOUND('',#194475,.F.); +#194475 = EDGE_LOOP('',(#194476,#194477,#194485,#194493)); +#194476 = ORIENTED_EDGE('',*,*,#194455,.T.); +#194477 = ORIENTED_EDGE('',*,*,#194478,.T.); +#194478 = EDGE_CURVE('',#194448,#194479,#194481,.T.); +#194479 = VERTEX_POINT('',#194480); +#194480 = CARTESIAN_POINT('',(134.251167,-115.625815,-3.5E-02)); +#194481 = LINE('',#194482,#194483); +#194482 = CARTESIAN_POINT('',(134.236235,-115.661863,-3.5E-02)); +#194483 = VECTOR('',#194484,1.); +#194484 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194485 = ORIENTED_EDGE('',*,*,#194486,.F.); +#194486 = EDGE_CURVE('',#194487,#194479,#194489,.T.); +#194487 = VERTEX_POINT('',#194488); +#194488 = CARTESIAN_POINT('',(134.251167,-115.625815,0.)); +#194489 = LINE('',#194490,#194491); +#194490 = CARTESIAN_POINT('',(134.251167,-115.625815,0.)); +#194491 = VECTOR('',#194492,1.); +#194492 = DIRECTION('',(0.,0.,-1.)); +#194493 = ORIENTED_EDGE('',*,*,#194494,.F.); +#194494 = EDGE_CURVE('',#194456,#194487,#194495,.T.); +#194495 = LINE('',#194496,#194497); +#194496 = CARTESIAN_POINT('',(134.236235,-115.661863,0.)); +#194497 = VECTOR('',#194498,1.); +#194498 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194499 = PLANE('',#194500); +#194500 = AXIS2_PLACEMENT_3D('',#194501,#194502,#194503); +#194501 = CARTESIAN_POINT('',(134.236235,-115.661863,0.)); +#194502 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#194503 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#194504 = ADVANCED_FACE('',(#194505),#194530,.F.); +#194505 = FACE_BOUND('',#194506,.F.); +#194506 = EDGE_LOOP('',(#194507,#194508,#194516,#194524)); +#194507 = ORIENTED_EDGE('',*,*,#194486,.T.); +#194508 = ORIENTED_EDGE('',*,*,#194509,.T.); +#194509 = EDGE_CURVE('',#194479,#194510,#194512,.T.); +#194510 = VERTEX_POINT('',#194511); +#194511 = CARTESIAN_POINT('',(134.485129,-115.391853,-3.5E-02)); +#194512 = LINE('',#194513,#194514); +#194513 = CARTESIAN_POINT('',(134.251167,-115.625815,-3.5E-02)); +#194514 = VECTOR('',#194515,1.); +#194515 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194516 = ORIENTED_EDGE('',*,*,#194517,.F.); +#194517 = EDGE_CURVE('',#194518,#194510,#194520,.T.); +#194518 = VERTEX_POINT('',#194519); +#194519 = CARTESIAN_POINT('',(134.485129,-115.391853,0.)); +#194520 = LINE('',#194521,#194522); +#194521 = CARTESIAN_POINT('',(134.485129,-115.391853,0.)); +#194522 = VECTOR('',#194523,1.); +#194523 = DIRECTION('',(0.,0.,-1.)); +#194524 = ORIENTED_EDGE('',*,*,#194525,.F.); +#194525 = EDGE_CURVE('',#194487,#194518,#194526,.T.); +#194526 = LINE('',#194527,#194528); +#194527 = CARTESIAN_POINT('',(134.251167,-115.625815,0.)); +#194528 = VECTOR('',#194529,1.); +#194529 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194530 = PLANE('',#194531); +#194531 = AXIS2_PLACEMENT_3D('',#194532,#194533,#194534); +#194532 = CARTESIAN_POINT('',(134.251167,-115.625815,0.)); +#194533 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194534 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194535 = ADVANCED_FACE('',(#194536),#194561,.F.); +#194536 = FACE_BOUND('',#194537,.F.); +#194537 = EDGE_LOOP('',(#194538,#194539,#194547,#194555)); +#194538 = ORIENTED_EDGE('',*,*,#194517,.T.); +#194539 = ORIENTED_EDGE('',*,*,#194540,.T.); +#194540 = EDGE_CURVE('',#194510,#194541,#194543,.T.); +#194541 = VERTEX_POINT('',#194542); +#194542 = CARTESIAN_POINT('',(134.521177,-115.376921,-3.5E-02)); +#194543 = LINE('',#194544,#194545); +#194544 = CARTESIAN_POINT('',(134.485129,-115.391853,-3.5E-02)); +#194545 = VECTOR('',#194546,1.); +#194546 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#194547 = ORIENTED_EDGE('',*,*,#194548,.F.); +#194548 = EDGE_CURVE('',#194549,#194541,#194551,.T.); +#194549 = VERTEX_POINT('',#194550); +#194550 = CARTESIAN_POINT('',(134.521177,-115.376921,0.)); +#194551 = LINE('',#194552,#194553); +#194552 = CARTESIAN_POINT('',(134.521177,-115.376921,0.)); +#194553 = VECTOR('',#194554,1.); +#194554 = DIRECTION('',(0.,0.,-1.)); +#194555 = ORIENTED_EDGE('',*,*,#194556,.F.); +#194556 = EDGE_CURVE('',#194518,#194549,#194557,.T.); +#194557 = LINE('',#194558,#194559); +#194558 = CARTESIAN_POINT('',(134.485129,-115.391853,0.)); +#194559 = VECTOR('',#194560,1.); +#194560 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#194561 = PLANE('',#194562); +#194562 = AXIS2_PLACEMENT_3D('',#194563,#194564,#194565); +#194563 = CARTESIAN_POINT('',(134.485129,-115.391853,0.)); +#194564 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#194565 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#194566 = ADVANCED_FACE('',(#194567),#194592,.F.); +#194567 = FACE_BOUND('',#194568,.F.); +#194568 = EDGE_LOOP('',(#194569,#194570,#194578,#194586)); +#194569 = ORIENTED_EDGE('',*,*,#194548,.T.); +#194570 = ORIENTED_EDGE('',*,*,#194571,.T.); +#194571 = EDGE_CURVE('',#194541,#194572,#194574,.T.); +#194572 = VERTEX_POINT('',#194573); +#194573 = CARTESIAN_POINT('',(140.801617,-115.376921,-3.5E-02)); +#194574 = LINE('',#194575,#194576); +#194575 = CARTESIAN_POINT('',(134.521177,-115.376921,-3.5E-02)); +#194576 = VECTOR('',#194577,1.); +#194577 = DIRECTION('',(1.,0.,0.)); +#194578 = ORIENTED_EDGE('',*,*,#194579,.F.); +#194579 = EDGE_CURVE('',#194580,#194572,#194582,.T.); +#194580 = VERTEX_POINT('',#194581); +#194581 = CARTESIAN_POINT('',(140.801617,-115.376921,0.)); +#194582 = LINE('',#194583,#194584); +#194583 = CARTESIAN_POINT('',(140.801617,-115.376921,0.)); +#194584 = VECTOR('',#194585,1.); +#194585 = DIRECTION('',(0.,0.,-1.)); +#194586 = ORIENTED_EDGE('',*,*,#194587,.F.); +#194587 = EDGE_CURVE('',#194549,#194580,#194588,.T.); +#194588 = LINE('',#194589,#194590); +#194589 = CARTESIAN_POINT('',(134.521177,-115.376921,0.)); +#194590 = VECTOR('',#194591,1.); +#194591 = DIRECTION('',(1.,0.,0.)); +#194592 = PLANE('',#194593); +#194593 = AXIS2_PLACEMENT_3D('',#194594,#194595,#194596); +#194594 = CARTESIAN_POINT('',(134.521177,-115.376921,0.)); +#194595 = DIRECTION('',(0.,-1.,0.)); +#194596 = DIRECTION('',(1.,0.,0.)); +#194597 = ADVANCED_FACE('',(#194598),#194623,.F.); +#194598 = FACE_BOUND('',#194599,.F.); +#194599 = EDGE_LOOP('',(#194600,#194601,#194609,#194617)); +#194600 = ORIENTED_EDGE('',*,*,#194579,.T.); +#194601 = ORIENTED_EDGE('',*,*,#194602,.T.); +#194602 = EDGE_CURVE('',#194572,#194603,#194605,.T.); +#194603 = VERTEX_POINT('',#194604); +#194604 = CARTESIAN_POINT('',(140.837665,-115.391853,-3.5E-02)); +#194605 = LINE('',#194606,#194607); +#194606 = CARTESIAN_POINT('',(140.801617,-115.376921,-3.5E-02)); +#194607 = VECTOR('',#194608,1.); +#194608 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#194609 = ORIENTED_EDGE('',*,*,#194610,.F.); +#194610 = EDGE_CURVE('',#194611,#194603,#194613,.T.); +#194611 = VERTEX_POINT('',#194612); +#194612 = CARTESIAN_POINT('',(140.837665,-115.391853,0.)); +#194613 = LINE('',#194614,#194615); +#194614 = CARTESIAN_POINT('',(140.837665,-115.391853,0.)); +#194615 = VECTOR('',#194616,1.); +#194616 = DIRECTION('',(0.,0.,-1.)); +#194617 = ORIENTED_EDGE('',*,*,#194618,.F.); +#194618 = EDGE_CURVE('',#194580,#194611,#194619,.T.); +#194619 = LINE('',#194620,#194621); +#194620 = CARTESIAN_POINT('',(140.801617,-115.376921,0.)); +#194621 = VECTOR('',#194622,1.); +#194622 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#194623 = PLANE('',#194624); +#194624 = AXIS2_PLACEMENT_3D('',#194625,#194626,#194627); +#194625 = CARTESIAN_POINT('',(140.801617,-115.376921,0.)); +#194626 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#194627 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#194628 = ADVANCED_FACE('',(#194629),#194654,.F.); +#194629 = FACE_BOUND('',#194630,.F.); +#194630 = EDGE_LOOP('',(#194631,#194632,#194640,#194648)); +#194631 = ORIENTED_EDGE('',*,*,#194610,.T.); +#194632 = ORIENTED_EDGE('',*,*,#194633,.T.); +#194633 = EDGE_CURVE('',#194603,#194634,#194636,.T.); +#194634 = VERTEX_POINT('',#194635); +#194635 = CARTESIAN_POINT('',(140.983147,-115.537334,-3.5E-02)); +#194636 = LINE('',#194637,#194638); +#194637 = CARTESIAN_POINT('',(140.837665,-115.391853,-3.5E-02)); +#194638 = VECTOR('',#194639,1.); +#194639 = DIRECTION('',(0.707109211412,-0.707104350953,0.)); +#194640 = ORIENTED_EDGE('',*,*,#194641,.F.); +#194641 = EDGE_CURVE('',#194642,#194634,#194644,.T.); +#194642 = VERTEX_POINT('',#194643); +#194643 = CARTESIAN_POINT('',(140.983147,-115.537334,0.)); +#194644 = LINE('',#194645,#194646); +#194645 = CARTESIAN_POINT('',(140.983147,-115.537334,0.)); +#194646 = VECTOR('',#194647,1.); +#194647 = DIRECTION('',(0.,0.,-1.)); +#194648 = ORIENTED_EDGE('',*,*,#194649,.F.); +#194649 = EDGE_CURVE('',#194611,#194642,#194650,.T.); +#194650 = LINE('',#194651,#194652); +#194651 = CARTESIAN_POINT('',(140.837665,-115.391853,0.)); +#194652 = VECTOR('',#194653,1.); +#194653 = DIRECTION('',(0.707109211412,-0.707104350953,0.)); +#194654 = PLANE('',#194655); +#194655 = AXIS2_PLACEMENT_3D('',#194656,#194657,#194658); +#194656 = CARTESIAN_POINT('',(140.837665,-115.391853,0.)); +#194657 = DIRECTION('',(-0.707104350953,-0.707109211412,-0.)); +#194658 = DIRECTION('',(0.707109211412,-0.707104350953,0.)); +#194659 = ADVANCED_FACE('',(#194660),#194685,.F.); +#194660 = FACE_BOUND('',#194661,.F.); +#194661 = EDGE_LOOP('',(#194662,#194663,#194671,#194679)); +#194662 = ORIENTED_EDGE('',*,*,#194641,.T.); +#194663 = ORIENTED_EDGE('',*,*,#194664,.T.); +#194664 = EDGE_CURVE('',#194634,#194665,#194667,.T.); +#194665 = VERTEX_POINT('',#194666); +#194666 = CARTESIAN_POINT('',(140.998079,-115.573383,-3.5E-02)); +#194667 = LINE('',#194668,#194669); +#194668 = CARTESIAN_POINT('',(140.983147,-115.537334,-3.5E-02)); +#194669 = VECTOR('',#194670,1.); +#194670 = DIRECTION('',(0.382683766837,-0.923879393968,0.)); +#194671 = ORIENTED_EDGE('',*,*,#194672,.F.); +#194672 = EDGE_CURVE('',#194673,#194665,#194675,.T.); +#194673 = VERTEX_POINT('',#194674); +#194674 = CARTESIAN_POINT('',(140.998079,-115.573383,0.)); +#194675 = LINE('',#194676,#194677); +#194676 = CARTESIAN_POINT('',(140.998079,-115.573383,0.)); +#194677 = VECTOR('',#194678,1.); +#194678 = DIRECTION('',(0.,0.,-1.)); +#194679 = ORIENTED_EDGE('',*,*,#194680,.F.); +#194680 = EDGE_CURVE('',#194642,#194673,#194681,.T.); +#194681 = LINE('',#194682,#194683); +#194682 = CARTESIAN_POINT('',(140.983147,-115.537334,0.)); +#194683 = VECTOR('',#194684,1.); +#194684 = DIRECTION('',(0.382683766837,-0.923879393968,0.)); +#194685 = PLANE('',#194686); +#194686 = AXIS2_PLACEMENT_3D('',#194687,#194688,#194689); +#194687 = CARTESIAN_POINT('',(140.983147,-115.537334,0.)); +#194688 = DIRECTION('',(-0.923879393968,-0.382683766837,-0.)); +#194689 = DIRECTION('',(0.382683766837,-0.923879393968,0.)); +#194690 = ADVANCED_FACE('',(#194691),#194716,.F.); +#194691 = FACE_BOUND('',#194692,.F.); +#194692 = EDGE_LOOP('',(#194693,#194694,#194702,#194710)); +#194693 = ORIENTED_EDGE('',*,*,#194672,.T.); +#194694 = ORIENTED_EDGE('',*,*,#194695,.T.); +#194695 = EDGE_CURVE('',#194665,#194696,#194698,.T.); +#194696 = VERTEX_POINT('',#194697); +#194697 = CARTESIAN_POINT('',(141.,-115.594975,-3.5E-02)); +#194698 = LINE('',#194699,#194700); +#194699 = CARTESIAN_POINT('',(140.998079,-115.573383,-3.5E-02)); +#194700 = VECTOR('',#194701,1.); +#194701 = DIRECTION('',(8.861810688334E-02,-0.996065676114,0.)); +#194702 = ORIENTED_EDGE('',*,*,#194703,.F.); +#194703 = EDGE_CURVE('',#194704,#194696,#194706,.T.); +#194704 = VERTEX_POINT('',#194705); +#194705 = CARTESIAN_POINT('',(141.,-115.594975,0.)); +#194706 = LINE('',#194707,#194708); +#194707 = CARTESIAN_POINT('',(141.,-115.594975,0.)); +#194708 = VECTOR('',#194709,1.); +#194709 = DIRECTION('',(0.,0.,-1.)); +#194710 = ORIENTED_EDGE('',*,*,#194711,.F.); +#194711 = EDGE_CURVE('',#194673,#194704,#194712,.T.); +#194712 = LINE('',#194713,#194714); +#194713 = CARTESIAN_POINT('',(140.998079,-115.573383,0.)); +#194714 = VECTOR('',#194715,1.); +#194715 = DIRECTION('',(8.861810688334E-02,-0.996065676114,0.)); +#194716 = PLANE('',#194717); +#194717 = AXIS2_PLACEMENT_3D('',#194718,#194719,#194720); +#194718 = CARTESIAN_POINT('',(140.998079,-115.573383,0.)); +#194719 = DIRECTION('',(-0.996065676114,-8.861810688334E-02,-0.)); +#194720 = DIRECTION('',(8.861810688334E-02,-0.996065676114,0.)); +#194721 = ADVANCED_FACE('',(#194722),#194747,.F.); +#194722 = FACE_BOUND('',#194723,.F.); +#194723 = EDGE_LOOP('',(#194724,#194725,#194733,#194741)); +#194724 = ORIENTED_EDGE('',*,*,#194703,.T.); +#194725 = ORIENTED_EDGE('',*,*,#194726,.T.); +#194726 = EDGE_CURVE('',#194696,#194727,#194729,.T.); +#194727 = VERTEX_POINT('',#194728); +#194728 = CARTESIAN_POINT('',(141.292893,-115.887868,-3.5E-02)); +#194729 = LINE('',#194730,#194731); +#194730 = CARTESIAN_POINT('',(141.,-115.594975,-3.5E-02)); +#194731 = VECTOR('',#194732,1.); +#194732 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194733 = ORIENTED_EDGE('',*,*,#194734,.F.); +#194734 = EDGE_CURVE('',#194735,#194727,#194737,.T.); +#194735 = VERTEX_POINT('',#194736); +#194736 = CARTESIAN_POINT('',(141.292893,-115.887868,0.)); +#194737 = LINE('',#194738,#194739); +#194738 = CARTESIAN_POINT('',(141.292893,-115.887868,0.)); +#194739 = VECTOR('',#194740,1.); +#194740 = DIRECTION('',(0.,0.,-1.)); +#194741 = ORIENTED_EDGE('',*,*,#194742,.F.); +#194742 = EDGE_CURVE('',#194704,#194735,#194743,.T.); +#194743 = LINE('',#194744,#194745); +#194744 = CARTESIAN_POINT('',(141.,-115.594975,0.)); +#194745 = VECTOR('',#194746,1.); +#194746 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194747 = PLANE('',#194748); +#194748 = AXIS2_PLACEMENT_3D('',#194749,#194750,#194751); +#194749 = CARTESIAN_POINT('',(141.,-115.594975,0.)); +#194750 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#194751 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194752 = ADVANCED_FACE('',(#194753),#194778,.F.); +#194753 = FACE_BOUND('',#194754,.F.); +#194754 = EDGE_LOOP('',(#194755,#194756,#194764,#194772)); +#194755 = ORIENTED_EDGE('',*,*,#194734,.T.); +#194756 = ORIENTED_EDGE('',*,*,#194757,.T.); +#194757 = EDGE_CURVE('',#194727,#194758,#194760,.T.); +#194758 = VERTEX_POINT('',#194759); +#194759 = CARTESIAN_POINT('',(141.507377,-115.889789,-3.5E-02)); +#194760 = LINE('',#194761,#194762); +#194761 = CARTESIAN_POINT('',(141.292893,-115.887868,-3.5E-02)); +#194762 = VECTOR('',#194763,1.); +#194763 = DIRECTION('',(0.99995989405,-8.956019826496E-03,0.)); +#194764 = ORIENTED_EDGE('',*,*,#194765,.F.); +#194765 = EDGE_CURVE('',#194766,#194758,#194768,.T.); +#194766 = VERTEX_POINT('',#194767); +#194767 = CARTESIAN_POINT('',(141.507377,-115.889789,0.)); +#194768 = LINE('',#194769,#194770); +#194769 = CARTESIAN_POINT('',(141.507377,-115.889789,0.)); +#194770 = VECTOR('',#194771,1.); +#194771 = DIRECTION('',(0.,0.,-1.)); +#194772 = ORIENTED_EDGE('',*,*,#194773,.F.); +#194773 = EDGE_CURVE('',#194735,#194766,#194774,.T.); +#194774 = LINE('',#194775,#194776); +#194775 = CARTESIAN_POINT('',(141.292893,-115.887868,0.)); +#194776 = VECTOR('',#194777,1.); +#194777 = DIRECTION('',(0.99995989405,-8.956019826496E-03,0.)); +#194778 = PLANE('',#194779); +#194779 = AXIS2_PLACEMENT_3D('',#194780,#194781,#194782); +#194780 = CARTESIAN_POINT('',(141.292893,-115.887868,0.)); +#194781 = DIRECTION('',(-8.956019826496E-03,-0.99995989405,-0.)); +#194782 = DIRECTION('',(0.99995989405,-8.956019826496E-03,0.)); +#194783 = ADVANCED_FACE('',(#194784),#194809,.F.); +#194784 = FACE_BOUND('',#194785,.F.); +#194785 = EDGE_LOOP('',(#194786,#194787,#194795,#194803)); +#194786 = ORIENTED_EDGE('',*,*,#194765,.T.); +#194787 = ORIENTED_EDGE('',*,*,#194788,.T.); +#194788 = EDGE_CURVE('',#194758,#194789,#194791,.T.); +#194789 = VERTEX_POINT('',#194790); +#194790 = CARTESIAN_POINT('',(141.532028,-115.9,-3.5E-02)); +#194791 = LINE('',#194792,#194793); +#194792 = CARTESIAN_POINT('',(141.507377,-115.889789,-3.5E-02)); +#194793 = VECTOR('',#194794,1.); +#194794 = DIRECTION('',(0.923876597829,-0.382690517238,0.)); +#194795 = ORIENTED_EDGE('',*,*,#194796,.F.); +#194796 = EDGE_CURVE('',#194797,#194789,#194799,.T.); +#194797 = VERTEX_POINT('',#194798); +#194798 = CARTESIAN_POINT('',(141.532028,-115.9,0.)); +#194799 = LINE('',#194800,#194801); +#194800 = CARTESIAN_POINT('',(141.532028,-115.9,0.)); +#194801 = VECTOR('',#194802,1.); +#194802 = DIRECTION('',(0.,0.,-1.)); +#194803 = ORIENTED_EDGE('',*,*,#194804,.F.); +#194804 = EDGE_CURVE('',#194766,#194797,#194805,.T.); +#194805 = LINE('',#194806,#194807); +#194806 = CARTESIAN_POINT('',(141.507377,-115.889789,0.)); +#194807 = VECTOR('',#194808,1.); +#194808 = DIRECTION('',(0.923876597829,-0.382690517238,0.)); +#194809 = PLANE('',#194810); +#194810 = AXIS2_PLACEMENT_3D('',#194811,#194812,#194813); +#194811 = CARTESIAN_POINT('',(141.507377,-115.889789,0.)); +#194812 = DIRECTION('',(-0.382690517238,-0.923876597829,-0.)); +#194813 = DIRECTION('',(0.923876597829,-0.382690517238,0.)); +#194814 = ADVANCED_FACE('',(#194815),#194840,.F.); +#194815 = FACE_BOUND('',#194816,.F.); +#194816 = EDGE_LOOP('',(#194817,#194818,#194826,#194834)); +#194817 = ORIENTED_EDGE('',*,*,#194796,.T.); +#194818 = ORIENTED_EDGE('',*,*,#194819,.T.); +#194819 = EDGE_CURVE('',#194789,#194820,#194822,.T.); +#194820 = VERTEX_POINT('',#194821); +#194821 = CARTESIAN_POINT('',(142.458578,-115.9,-3.5E-02)); +#194822 = LINE('',#194823,#194824); +#194823 = CARTESIAN_POINT('',(141.532028,-115.9,-3.5E-02)); +#194824 = VECTOR('',#194825,1.); +#194825 = DIRECTION('',(1.,0.,0.)); +#194826 = ORIENTED_EDGE('',*,*,#194827,.F.); +#194827 = EDGE_CURVE('',#194828,#194820,#194830,.T.); +#194828 = VERTEX_POINT('',#194829); +#194829 = CARTESIAN_POINT('',(142.458578,-115.9,0.)); +#194830 = LINE('',#194831,#194832); +#194831 = CARTESIAN_POINT('',(142.458578,-115.9,0.)); +#194832 = VECTOR('',#194833,1.); +#194833 = DIRECTION('',(0.,0.,-1.)); +#194834 = ORIENTED_EDGE('',*,*,#194835,.F.); +#194835 = EDGE_CURVE('',#194797,#194828,#194836,.T.); +#194836 = LINE('',#194837,#194838); +#194837 = CARTESIAN_POINT('',(141.532028,-115.9,0.)); +#194838 = VECTOR('',#194839,1.); +#194839 = DIRECTION('',(1.,0.,0.)); +#194840 = PLANE('',#194841); +#194841 = AXIS2_PLACEMENT_3D('',#194842,#194843,#194844); +#194842 = CARTESIAN_POINT('',(141.532028,-115.9,0.)); +#194843 = DIRECTION('',(0.,-1.,0.)); +#194844 = DIRECTION('',(1.,0.,0.)); +#194845 = ADVANCED_FACE('',(#194846),#194871,.F.); +#194846 = FACE_BOUND('',#194847,.F.); +#194847 = EDGE_LOOP('',(#194848,#194849,#194857,#194865)); +#194848 = ORIENTED_EDGE('',*,*,#194827,.T.); +#194849 = ORIENTED_EDGE('',*,*,#194850,.T.); +#194850 = EDGE_CURVE('',#194820,#194851,#194853,.T.); +#194851 = VERTEX_POINT('',#194852); +#194852 = CARTESIAN_POINT('',(148.5,-109.858578,-3.5E-02)); +#194853 = LINE('',#194854,#194855); +#194854 = CARTESIAN_POINT('',(142.458578,-115.9,-3.5E-02)); +#194855 = VECTOR('',#194856,1.); +#194856 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194857 = ORIENTED_EDGE('',*,*,#194858,.F.); +#194858 = EDGE_CURVE('',#194859,#194851,#194861,.T.); +#194859 = VERTEX_POINT('',#194860); +#194860 = CARTESIAN_POINT('',(148.5,-109.858578,0.)); +#194861 = LINE('',#194862,#194863); +#194862 = CARTESIAN_POINT('',(148.5,-109.858578,0.)); +#194863 = VECTOR('',#194864,1.); +#194864 = DIRECTION('',(0.,0.,-1.)); +#194865 = ORIENTED_EDGE('',*,*,#194866,.F.); +#194866 = EDGE_CURVE('',#194828,#194859,#194867,.T.); +#194867 = LINE('',#194868,#194869); +#194868 = CARTESIAN_POINT('',(142.458578,-115.9,0.)); +#194869 = VECTOR('',#194870,1.); +#194870 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194871 = PLANE('',#194872); +#194872 = AXIS2_PLACEMENT_3D('',#194873,#194874,#194875); +#194873 = CARTESIAN_POINT('',(142.458578,-115.9,0.)); +#194874 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#194875 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#194876 = ADVANCED_FACE('',(#194877),#194902,.F.); +#194877 = FACE_BOUND('',#194878,.F.); +#194878 = EDGE_LOOP('',(#194879,#194880,#194888,#194896)); +#194879 = ORIENTED_EDGE('',*,*,#194858,.T.); +#194880 = ORIENTED_EDGE('',*,*,#194881,.T.); +#194881 = EDGE_CURVE('',#194851,#194882,#194884,.T.); +#194882 = VERTEX_POINT('',#194883); +#194883 = CARTESIAN_POINT('',(148.5,-91.292893,-3.5E-02)); +#194884 = LINE('',#194885,#194886); +#194885 = CARTESIAN_POINT('',(148.5,-109.858578,-3.5E-02)); +#194886 = VECTOR('',#194887,1.); +#194887 = DIRECTION('',(0.,1.,0.)); +#194888 = ORIENTED_EDGE('',*,*,#194889,.F.); +#194889 = EDGE_CURVE('',#194890,#194882,#194892,.T.); +#194890 = VERTEX_POINT('',#194891); +#194891 = CARTESIAN_POINT('',(148.5,-91.292893,0.)); +#194892 = LINE('',#194893,#194894); +#194893 = CARTESIAN_POINT('',(148.5,-91.292893,0.)); +#194894 = VECTOR('',#194895,1.); +#194895 = DIRECTION('',(0.,0.,-1.)); +#194896 = ORIENTED_EDGE('',*,*,#194897,.F.); +#194897 = EDGE_CURVE('',#194859,#194890,#194898,.T.); +#194898 = LINE('',#194899,#194900); +#194899 = CARTESIAN_POINT('',(148.5,-109.858578,0.)); +#194900 = VECTOR('',#194901,1.); +#194901 = DIRECTION('',(0.,1.,0.)); +#194902 = PLANE('',#194903); +#194903 = AXIS2_PLACEMENT_3D('',#194904,#194905,#194906); +#194904 = CARTESIAN_POINT('',(148.5,-109.858578,0.)); +#194905 = DIRECTION('',(1.,-0.,0.)); +#194906 = DIRECTION('',(0.,1.,0.)); +#194907 = ADVANCED_FACE('',(#194908),#194933,.F.); +#194908 = FACE_BOUND('',#194909,.F.); +#194909 = EDGE_LOOP('',(#194910,#194911,#194919,#194927)); +#194910 = ORIENTED_EDGE('',*,*,#194889,.T.); +#194911 = ORIENTED_EDGE('',*,*,#194912,.T.); +#194912 = EDGE_CURVE('',#194882,#194913,#194915,.T.); +#194913 = VERTEX_POINT('',#194914); +#194914 = CARTESIAN_POINT('',(146.016853,-88.807028,-3.5E-02)); +#194915 = LINE('',#194916,#194917); +#194916 = CARTESIAN_POINT('',(148.5,-91.292893,-3.5E-02)); +#194917 = VECTOR('',#194918,1.); +#194918 = DIRECTION('',(-0.706719895106,0.707493455702,0.)); +#194919 = ORIENTED_EDGE('',*,*,#194920,.F.); +#194920 = EDGE_CURVE('',#194921,#194913,#194923,.T.); +#194921 = VERTEX_POINT('',#194922); +#194922 = CARTESIAN_POINT('',(146.016853,-88.807028,0.)); +#194923 = LINE('',#194924,#194925); +#194924 = CARTESIAN_POINT('',(146.016853,-88.807028,0.)); +#194925 = VECTOR('',#194926,1.); +#194926 = DIRECTION('',(0.,0.,-1.)); +#194927 = ORIENTED_EDGE('',*,*,#194928,.F.); +#194928 = EDGE_CURVE('',#194890,#194921,#194929,.T.); +#194929 = LINE('',#194930,#194931); +#194930 = CARTESIAN_POINT('',(148.5,-91.292893,0.)); +#194931 = VECTOR('',#194932,1.); +#194932 = DIRECTION('',(-0.706719895106,0.707493455702,0.)); +#194933 = PLANE('',#194934); +#194934 = AXIS2_PLACEMENT_3D('',#194935,#194936,#194937); +#194935 = CARTESIAN_POINT('',(148.5,-91.292893,0.)); +#194936 = DIRECTION('',(0.707493455702,0.706719895106,0.)); +#194937 = DIRECTION('',(-0.706719895106,0.707493455702,0.)); +#194938 = ADVANCED_FACE('',(#194939),#194964,.F.); +#194939 = FACE_BOUND('',#194940,.F.); +#194940 = EDGE_LOOP('',(#194941,#194942,#194950,#194958)); +#194941 = ORIENTED_EDGE('',*,*,#194920,.T.); +#194942 = ORIENTED_EDGE('',*,*,#194943,.T.); +#194943 = EDGE_CURVE('',#194913,#194944,#194946,.T.); +#194944 = VERTEX_POINT('',#194945); +#194945 = CARTESIAN_POINT('',(146.001921,-88.77098,-3.5E-02)); +#194946 = LINE('',#194947,#194948); +#194947 = CARTESIAN_POINT('',(146.016853,-88.807028,-3.5E-02)); +#194948 = VECTOR('',#194949,1.); +#194949 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#194950 = ORIENTED_EDGE('',*,*,#194951,.F.); +#194951 = EDGE_CURVE('',#194952,#194944,#194954,.T.); +#194952 = VERTEX_POINT('',#194953); +#194953 = CARTESIAN_POINT('',(146.001921,-88.77098,0.)); +#194954 = LINE('',#194955,#194956); +#194955 = CARTESIAN_POINT('',(146.001921,-88.77098,0.)); +#194956 = VECTOR('',#194957,1.); +#194957 = DIRECTION('',(0.,0.,-1.)); +#194958 = ORIENTED_EDGE('',*,*,#194959,.F.); +#194959 = EDGE_CURVE('',#194921,#194952,#194960,.T.); +#194960 = LINE('',#194961,#194962); +#194961 = CARTESIAN_POINT('',(146.016853,-88.807028,0.)); +#194962 = VECTOR('',#194963,1.); +#194963 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#194964 = PLANE('',#194965); +#194965 = AXIS2_PLACEMENT_3D('',#194966,#194967,#194968); +#194966 = CARTESIAN_POINT('',(146.016853,-88.807028,0.)); +#194967 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#194968 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#194969 = ADVANCED_FACE('',(#194970),#194995,.F.); +#194970 = FACE_BOUND('',#194971,.F.); +#194971 = EDGE_LOOP('',(#194972,#194973,#194981,#194989)); +#194972 = ORIENTED_EDGE('',*,*,#194951,.T.); +#194973 = ORIENTED_EDGE('',*,*,#194974,.T.); +#194974 = EDGE_CURVE('',#194944,#194975,#194977,.T.); +#194975 = VERTEX_POINT('',#194976); +#194976 = CARTESIAN_POINT('',(146.,-80.292893,-3.5E-02)); +#194977 = LINE('',#194978,#194979); +#194978 = CARTESIAN_POINT('',(146.001921,-88.77098,-3.5E-02)); +#194979 = VECTOR('',#194980,1.); +#194980 = DIRECTION('',(-2.265841280819E-04,0.99999997433,0.)); +#194981 = ORIENTED_EDGE('',*,*,#194982,.F.); +#194982 = EDGE_CURVE('',#194983,#194975,#194985,.T.); +#194983 = VERTEX_POINT('',#194984); +#194984 = CARTESIAN_POINT('',(146.,-80.292893,0.)); +#194985 = LINE('',#194986,#194987); +#194986 = CARTESIAN_POINT('',(146.,-80.292893,0.)); +#194987 = VECTOR('',#194988,1.); +#194988 = DIRECTION('',(0.,0.,-1.)); +#194989 = ORIENTED_EDGE('',*,*,#194990,.F.); +#194990 = EDGE_CURVE('',#194952,#194983,#194991,.T.); +#194991 = LINE('',#194992,#194993); +#194992 = CARTESIAN_POINT('',(146.001921,-88.77098,0.)); +#194993 = VECTOR('',#194994,1.); +#194994 = DIRECTION('',(-2.265841280819E-04,0.99999997433,0.)); +#194995 = PLANE('',#194996); +#194996 = AXIS2_PLACEMENT_3D('',#194997,#194998,#194999); +#194997 = CARTESIAN_POINT('',(146.001921,-88.77098,0.)); +#194998 = DIRECTION('',(0.99999997433,2.265841280819E-04,0.)); +#194999 = DIRECTION('',(-2.265841280819E-04,0.99999997433,0.)); +#195000 = ADVANCED_FACE('',(#195001),#195026,.F.); +#195001 = FACE_BOUND('',#195002,.F.); +#195002 = EDGE_LOOP('',(#195003,#195004,#195012,#195020)); +#195003 = ORIENTED_EDGE('',*,*,#194982,.T.); +#195004 = ORIENTED_EDGE('',*,*,#195005,.T.); +#195005 = EDGE_CURVE('',#194975,#195006,#195008,.T.); +#195006 = VERTEX_POINT('',#195007); +#195007 = CARTESIAN_POINT('',(145.707107,-80.,-3.5E-02)); +#195008 = LINE('',#195009,#195010); +#195009 = CARTESIAN_POINT('',(146.,-80.292893,-3.5E-02)); +#195010 = VECTOR('',#195011,1.); +#195011 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#195012 = ORIENTED_EDGE('',*,*,#195013,.F.); +#195013 = EDGE_CURVE('',#195014,#195006,#195016,.T.); +#195014 = VERTEX_POINT('',#195015); +#195015 = CARTESIAN_POINT('',(145.707107,-80.,0.)); +#195016 = LINE('',#195017,#195018); +#195017 = CARTESIAN_POINT('',(145.707107,-80.,0.)); +#195018 = VECTOR('',#195019,1.); +#195019 = DIRECTION('',(0.,0.,-1.)); +#195020 = ORIENTED_EDGE('',*,*,#195021,.F.); +#195021 = EDGE_CURVE('',#194983,#195014,#195022,.T.); +#195022 = LINE('',#195023,#195024); +#195023 = CARTESIAN_POINT('',(146.,-80.292893,0.)); +#195024 = VECTOR('',#195025,1.); +#195025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#195026 = PLANE('',#195027); +#195027 = AXIS2_PLACEMENT_3D('',#195028,#195029,#195030); +#195028 = CARTESIAN_POINT('',(146.,-80.292893,0.)); +#195029 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#195030 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#195031 = ADVANCED_FACE('',(#195032),#195057,.F.); +#195032 = FACE_BOUND('',#195033,.F.); +#195033 = EDGE_LOOP('',(#195034,#195035,#195043,#195051)); +#195034 = ORIENTED_EDGE('',*,*,#195013,.T.); +#195035 = ORIENTED_EDGE('',*,*,#195036,.T.); +#195036 = EDGE_CURVE('',#195006,#195037,#195039,.T.); +#195037 = VERTEX_POINT('',#195038); +#195038 = CARTESIAN_POINT('',(145.224638,-80.,-3.5E-02)); +#195039 = LINE('',#195040,#195041); +#195040 = CARTESIAN_POINT('',(145.707107,-80.,-3.5E-02)); +#195041 = VECTOR('',#195042,1.); +#195042 = DIRECTION('',(-1.,0.,0.)); +#195043 = ORIENTED_EDGE('',*,*,#195044,.F.); +#195044 = EDGE_CURVE('',#195045,#195037,#195047,.T.); +#195045 = VERTEX_POINT('',#195046); +#195046 = CARTESIAN_POINT('',(145.224638,-80.,0.)); +#195047 = LINE('',#195048,#195049); +#195048 = CARTESIAN_POINT('',(145.224638,-80.,0.)); +#195049 = VECTOR('',#195050,1.); +#195050 = DIRECTION('',(0.,0.,-1.)); +#195051 = ORIENTED_EDGE('',*,*,#195052,.F.); +#195052 = EDGE_CURVE('',#195014,#195045,#195053,.T.); +#195053 = LINE('',#195054,#195055); +#195054 = CARTESIAN_POINT('',(145.707107,-80.,0.)); +#195055 = VECTOR('',#195056,1.); +#195056 = DIRECTION('',(-1.,0.,0.)); +#195057 = PLANE('',#195058); +#195058 = AXIS2_PLACEMENT_3D('',#195059,#195060,#195061); +#195059 = CARTESIAN_POINT('',(145.707107,-80.,0.)); +#195060 = DIRECTION('',(0.,1.,0.)); +#195061 = DIRECTION('',(-1.,0.,0.)); +#195062 = ADVANCED_FACE('',(#195063),#195088,.F.); +#195063 = FACE_BOUND('',#195064,.F.); +#195064 = EDGE_LOOP('',(#195065,#195066,#195074,#195082)); +#195065 = ORIENTED_EDGE('',*,*,#195044,.T.); +#195066 = ORIENTED_EDGE('',*,*,#195067,.T.); +#195067 = EDGE_CURVE('',#195037,#195068,#195070,.T.); +#195068 = VERTEX_POINT('',#195069); +#195069 = CARTESIAN_POINT('',(145.211477,-80.049118,-3.5E-02)); +#195070 = LINE('',#195071,#195072); +#195071 = CARTESIAN_POINT('',(145.224638,-80.,-3.5E-02)); +#195072 = VECTOR('',#195073,1.); +#195073 = DIRECTION('',(-0.258816688586,-0.965926457713,0.)); +#195074 = ORIENTED_EDGE('',*,*,#195075,.F.); +#195075 = EDGE_CURVE('',#195076,#195068,#195078,.T.); +#195076 = VERTEX_POINT('',#195077); +#195077 = CARTESIAN_POINT('',(145.211477,-80.049118,0.)); +#195078 = LINE('',#195079,#195080); +#195079 = CARTESIAN_POINT('',(145.211477,-80.049118,0.)); +#195080 = VECTOR('',#195081,1.); +#195081 = DIRECTION('',(0.,0.,-1.)); +#195082 = ORIENTED_EDGE('',*,*,#195083,.F.); +#195083 = EDGE_CURVE('',#195045,#195076,#195084,.T.); +#195084 = LINE('',#195085,#195086); +#195085 = CARTESIAN_POINT('',(145.224638,-80.,0.)); +#195086 = VECTOR('',#195087,1.); +#195087 = DIRECTION('',(-0.258816688586,-0.965926457713,0.)); +#195088 = PLANE('',#195089); +#195089 = AXIS2_PLACEMENT_3D('',#195090,#195091,#195092); +#195090 = CARTESIAN_POINT('',(145.224638,-80.,0.)); +#195091 = DIRECTION('',(-0.965926457713,0.258816688586,0.)); +#195092 = DIRECTION('',(-0.258816688586,-0.965926457713,0.)); +#195093 = ADVANCED_FACE('',(#195094),#195121,.T.); +#195094 = FACE_BOUND('',#195095,.F.); +#195095 = EDGE_LOOP('',(#195096,#195097,#195106,#195114)); +#195096 = ORIENTED_EDGE('',*,*,#195075,.T.); +#195097 = ORIENTED_EDGE('',*,*,#195098,.T.); +#195098 = EDGE_CURVE('',#195068,#195099,#195101,.T.); +#195099 = VERTEX_POINT('',#195100); +#195100 = CARTESIAN_POINT('',(145.172319,-79.751685,-3.5E-02)); +#195101 = CIRCLE('',#195102,0.29999967471); +#195102 = AXIS2_PLACEMENT_3D('',#195103,#195104,#195105); +#195103 = CARTESIAN_POINT('',(144.93431333943,-79.93431333943,-3.5E-02) + ); +#195104 = DIRECTION('',(-0.,0.,-1.)); +#195105 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#195106 = ORIENTED_EDGE('',*,*,#195107,.F.); +#195107 = EDGE_CURVE('',#195108,#195099,#195110,.T.); +#195108 = VERTEX_POINT('',#195109); +#195109 = CARTESIAN_POINT('',(145.172319,-79.751685,0.)); +#195110 = LINE('',#195111,#195112); +#195111 = CARTESIAN_POINT('',(145.172319,-79.751685,0.)); +#195112 = VECTOR('',#195113,1.); +#195113 = DIRECTION('',(0.,0.,-1.)); +#195114 = ORIENTED_EDGE('',*,*,#195115,.F.); +#195115 = EDGE_CURVE('',#195076,#195108,#195116,.T.); +#195116 = CIRCLE('',#195117,0.29999967471); +#195117 = AXIS2_PLACEMENT_3D('',#195118,#195119,#195120); +#195118 = CARTESIAN_POINT('',(144.93431333943,-79.93431333943,0.)); +#195119 = DIRECTION('',(-0.,0.,-1.)); +#195120 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#195121 = CYLINDRICAL_SURFACE('',#195122,0.29999967471); +#195122 = AXIS2_PLACEMENT_3D('',#195123,#195124,#195125); +#195123 = CARTESIAN_POINT('',(144.93431333943,-79.93431333943,0.)); +#195124 = DIRECTION('',(0.,-0.,1.)); +#195125 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#195126 = ADVANCED_FACE('',(#195127),#195143,.F.); +#195127 = FACE_BOUND('',#195128,.F.); +#195128 = EDGE_LOOP('',(#195129,#195130,#195136,#195137)); +#195129 = ORIENTED_EDGE('',*,*,#195107,.T.); +#195130 = ORIENTED_EDGE('',*,*,#195131,.T.); +#195131 = EDGE_CURVE('',#195099,#193198,#195132,.T.); +#195132 = LINE('',#195133,#195134); +#195133 = CARTESIAN_POINT('',(145.172319,-79.751685,-3.5E-02)); +#195134 = VECTOR('',#195135,1.); +#195135 = DIRECTION('',(0.500004325324,-0.866022906543,0.)); +#195136 = ORIENTED_EDGE('',*,*,#193195,.F.); +#195137 = ORIENTED_EDGE('',*,*,#195138,.F.); +#195138 = EDGE_CURVE('',#195108,#193196,#195139,.T.); +#195139 = LINE('',#195140,#195141); +#195140 = CARTESIAN_POINT('',(145.172319,-79.751685,0.)); +#195141 = VECTOR('',#195142,1.); +#195142 = DIRECTION('',(0.500004325324,-0.866022906543,0.)); +#195143 = PLANE('',#195144); +#195144 = AXIS2_PLACEMENT_3D('',#195145,#195146,#195147); +#195145 = CARTESIAN_POINT('',(145.172319,-79.751685,0.)); +#195146 = DIRECTION('',(-0.866022906543,-0.500004325324,-0.)); +#195147 = DIRECTION('',(0.500004325324,-0.866022906543,0.)); +#195148 = ADVANCED_FACE('',(#195149),#195176,.F.); +#195149 = FACE_BOUND('',#195150,.F.); +#195150 = EDGE_LOOP('',(#195151,#195161,#195168,#195169)); +#195151 = ORIENTED_EDGE('',*,*,#195152,.T.); +#195152 = EDGE_CURVE('',#195153,#195155,#195157,.T.); +#195153 = VERTEX_POINT('',#195154); +#195154 = CARTESIAN_POINT('',(129.137255,-116.5,0.)); +#195155 = VERTEX_POINT('',#195156); +#195156 = CARTESIAN_POINT('',(129.137255,-116.5,-3.5E-02)); +#195157 = LINE('',#195158,#195159); +#195158 = CARTESIAN_POINT('',(129.137255,-116.5,0.)); +#195159 = VECTOR('',#195160,1.); +#195160 = DIRECTION('',(0.,0.,-1.)); +#195161 = ORIENTED_EDGE('',*,*,#195162,.T.); +#195162 = EDGE_CURVE('',#195155,#195155,#195163,.T.); +#195163 = CIRCLE('',#195164,0.137255); +#195164 = AXIS2_PLACEMENT_3D('',#195165,#195166,#195167); +#195165 = CARTESIAN_POINT('',(129.,-116.5,-3.5E-02)); +#195166 = DIRECTION('',(0.,0.,1.)); +#195167 = DIRECTION('',(1.,0.,-0.)); +#195168 = ORIENTED_EDGE('',*,*,#195152,.F.); +#195169 = ORIENTED_EDGE('',*,*,#195170,.F.); +#195170 = EDGE_CURVE('',#195153,#195153,#195171,.T.); +#195171 = CIRCLE('',#195172,0.137255); +#195172 = AXIS2_PLACEMENT_3D('',#195173,#195174,#195175); +#195173 = CARTESIAN_POINT('',(129.,-116.5,0.)); +#195174 = DIRECTION('',(0.,0.,1.)); +#195175 = DIRECTION('',(1.,0.,-0.)); +#195176 = CYLINDRICAL_SURFACE('',#195177,0.137255); +#195177 = AXIS2_PLACEMENT_3D('',#195178,#195179,#195180); +#195178 = CARTESIAN_POINT('',(129.,-116.5,0.)); +#195179 = DIRECTION('',(0.,0.,1.)); +#195180 = DIRECTION('',(1.,0.,-0.)); +#195181 = ADVANCED_FACE('',(#195182),#195209,.F.); +#195182 = FACE_BOUND('',#195183,.F.); +#195183 = EDGE_LOOP('',(#195184,#195194,#195201,#195202)); +#195184 = ORIENTED_EDGE('',*,*,#195185,.T.); +#195185 = EDGE_CURVE('',#195186,#195188,#195190,.T.); +#195186 = VERTEX_POINT('',#195187); +#195187 = CARTESIAN_POINT('',(145.071568,-79.934313,0.)); +#195188 = VERTEX_POINT('',#195189); +#195189 = CARTESIAN_POINT('',(145.071568,-79.934313,-3.5E-02)); +#195190 = LINE('',#195191,#195192); +#195191 = CARTESIAN_POINT('',(145.071568,-79.934313,0.)); +#195192 = VECTOR('',#195193,1.); +#195193 = DIRECTION('',(0.,0.,-1.)); +#195194 = ORIENTED_EDGE('',*,*,#195195,.T.); +#195195 = EDGE_CURVE('',#195188,#195188,#195196,.T.); +#195196 = CIRCLE('',#195197,0.137255); +#195197 = AXIS2_PLACEMENT_3D('',#195198,#195199,#195200); +#195198 = CARTESIAN_POINT('',(144.934313,-79.934313,-3.5E-02)); +#195199 = DIRECTION('',(0.,0.,1.)); +#195200 = DIRECTION('',(1.,0.,-0.)); +#195201 = ORIENTED_EDGE('',*,*,#195185,.F.); +#195202 = ORIENTED_EDGE('',*,*,#195203,.F.); +#195203 = EDGE_CURVE('',#195186,#195186,#195204,.T.); +#195204 = CIRCLE('',#195205,0.137255); +#195205 = AXIS2_PLACEMENT_3D('',#195206,#195207,#195208); +#195206 = CARTESIAN_POINT('',(144.934313,-79.934313,0.)); +#195207 = DIRECTION('',(0.,0.,1.)); +#195208 = DIRECTION('',(1.,0.,-0.)); +#195209 = CYLINDRICAL_SURFACE('',#195210,0.137255); +#195210 = AXIS2_PLACEMENT_3D('',#195211,#195212,#195213); +#195211 = CARTESIAN_POINT('',(144.934313,-79.934313,0.)); +#195212 = DIRECTION('',(0.,0.,1.)); +#195213 = DIRECTION('',(1.,0.,-0.)); +#195214 = ADVANCED_FACE('',(#195215,#195280,#195283),#195286,.F.); +#195215 = FACE_BOUND('',#195216,.F.); +#195216 = EDGE_LOOP('',(#195217,#195218,#195219,#195220,#195221,#195222, + #195223,#195224,#195225,#195226,#195227,#195228,#195229,#195230, + #195231,#195232,#195233,#195234,#195235,#195236,#195237,#195238, + #195239,#195240,#195241,#195242,#195243,#195244,#195245,#195246, + #195247,#195248,#195249,#195250,#195251,#195252,#195253,#195254, + #195255,#195256,#195257,#195258,#195259,#195260,#195261,#195262, + #195263,#195264,#195265,#195266,#195267,#195268,#195269,#195270, + #195271,#195272,#195273,#195274,#195275,#195276,#195277,#195278, + #195279)); +#195217 = ORIENTED_EDGE('',*,*,#193221,.T.); +#195218 = ORIENTED_EDGE('',*,*,#193252,.T.); +#195219 = ORIENTED_EDGE('',*,*,#193283,.T.); +#195220 = ORIENTED_EDGE('',*,*,#193314,.T.); +#195221 = ORIENTED_EDGE('',*,*,#193345,.T.); +#195222 = ORIENTED_EDGE('',*,*,#193376,.T.); +#195223 = ORIENTED_EDGE('',*,*,#193407,.T.); +#195224 = ORIENTED_EDGE('',*,*,#193438,.T.); +#195225 = ORIENTED_EDGE('',*,*,#193469,.T.); +#195226 = ORIENTED_EDGE('',*,*,#193500,.T.); +#195227 = ORIENTED_EDGE('',*,*,#193531,.T.); +#195228 = ORIENTED_EDGE('',*,*,#193562,.T.); +#195229 = ORIENTED_EDGE('',*,*,#193593,.T.); +#195230 = ORIENTED_EDGE('',*,*,#193624,.T.); +#195231 = ORIENTED_EDGE('',*,*,#193655,.T.); +#195232 = ORIENTED_EDGE('',*,*,#193686,.T.); +#195233 = ORIENTED_EDGE('',*,*,#193717,.T.); +#195234 = ORIENTED_EDGE('',*,*,#193748,.T.); +#195235 = ORIENTED_EDGE('',*,*,#193779,.T.); +#195236 = ORIENTED_EDGE('',*,*,#193810,.T.); +#195237 = ORIENTED_EDGE('',*,*,#193841,.T.); +#195238 = ORIENTED_EDGE('',*,*,#193872,.T.); +#195239 = ORIENTED_EDGE('',*,*,#193903,.T.); +#195240 = ORIENTED_EDGE('',*,*,#193934,.T.); +#195241 = ORIENTED_EDGE('',*,*,#193965,.T.); +#195242 = ORIENTED_EDGE('',*,*,#193996,.T.); +#195243 = ORIENTED_EDGE('',*,*,#194027,.T.); +#195244 = ORIENTED_EDGE('',*,*,#194058,.T.); +#195245 = ORIENTED_EDGE('',*,*,#194089,.T.); +#195246 = ORIENTED_EDGE('',*,*,#194120,.T.); +#195247 = ORIENTED_EDGE('',*,*,#194151,.T.); +#195248 = ORIENTED_EDGE('',*,*,#194182,.T.); +#195249 = ORIENTED_EDGE('',*,*,#194214,.T.); +#195250 = ORIENTED_EDGE('',*,*,#194246,.T.); +#195251 = ORIENTED_EDGE('',*,*,#194277,.T.); +#195252 = ORIENTED_EDGE('',*,*,#194308,.T.); +#195253 = ORIENTED_EDGE('',*,*,#194339,.T.); +#195254 = ORIENTED_EDGE('',*,*,#194370,.T.); +#195255 = ORIENTED_EDGE('',*,*,#194401,.T.); +#195256 = ORIENTED_EDGE('',*,*,#194432,.T.); +#195257 = ORIENTED_EDGE('',*,*,#194463,.T.); +#195258 = ORIENTED_EDGE('',*,*,#194494,.T.); +#195259 = ORIENTED_EDGE('',*,*,#194525,.T.); +#195260 = ORIENTED_EDGE('',*,*,#194556,.T.); +#195261 = ORIENTED_EDGE('',*,*,#194587,.T.); +#195262 = ORIENTED_EDGE('',*,*,#194618,.T.); +#195263 = ORIENTED_EDGE('',*,*,#194649,.T.); +#195264 = ORIENTED_EDGE('',*,*,#194680,.T.); +#195265 = ORIENTED_EDGE('',*,*,#194711,.T.); +#195266 = ORIENTED_EDGE('',*,*,#194742,.T.); +#195267 = ORIENTED_EDGE('',*,*,#194773,.T.); +#195268 = ORIENTED_EDGE('',*,*,#194804,.T.); +#195269 = ORIENTED_EDGE('',*,*,#194835,.T.); +#195270 = ORIENTED_EDGE('',*,*,#194866,.T.); +#195271 = ORIENTED_EDGE('',*,*,#194897,.T.); +#195272 = ORIENTED_EDGE('',*,*,#194928,.T.); +#195273 = ORIENTED_EDGE('',*,*,#194959,.T.); +#195274 = ORIENTED_EDGE('',*,*,#194990,.T.); +#195275 = ORIENTED_EDGE('',*,*,#195021,.T.); +#195276 = ORIENTED_EDGE('',*,*,#195052,.T.); +#195277 = ORIENTED_EDGE('',*,*,#195083,.T.); +#195278 = ORIENTED_EDGE('',*,*,#195115,.T.); +#195279 = ORIENTED_EDGE('',*,*,#195138,.T.); +#195280 = FACE_BOUND('',#195281,.F.); +#195281 = EDGE_LOOP('',(#195282)); +#195282 = ORIENTED_EDGE('',*,*,#195170,.T.); +#195283 = FACE_BOUND('',#195284,.F.); +#195284 = EDGE_LOOP('',(#195285)); +#195285 = ORIENTED_EDGE('',*,*,#195203,.T.); +#195286 = PLANE('',#195287); +#195287 = AXIS2_PLACEMENT_3D('',#195288,#195289,#195290); +#195288 = CARTESIAN_POINT('',(0.,0.,0.)); +#195289 = DIRECTION('',(-0.,-0.,-1.)); +#195290 = DIRECTION('',(-1.,0.,0.)); +#195291 = ADVANCED_FACE('',(#195292,#195357,#195360),#195363,.T.); +#195292 = FACE_BOUND('',#195293,.T.); +#195293 = EDGE_LOOP('',(#195294,#195295,#195296,#195297,#195298,#195299, + #195300,#195301,#195302,#195303,#195304,#195305,#195306,#195307, + #195308,#195309,#195310,#195311,#195312,#195313,#195314,#195315, + #195316,#195317,#195318,#195319,#195320,#195321,#195322,#195323, + #195324,#195325,#195326,#195327,#195328,#195329,#195330,#195331, + #195332,#195333,#195334,#195335,#195336,#195337,#195338,#195339, + #195340,#195341,#195342,#195343,#195344,#195345,#195346,#195347, + #195348,#195349,#195350,#195351,#195352,#195353,#195354,#195355, + #195356)); +#195294 = ORIENTED_EDGE('',*,*,#193205,.T.); +#195295 = ORIENTED_EDGE('',*,*,#193236,.T.); +#195296 = ORIENTED_EDGE('',*,*,#193267,.T.); +#195297 = ORIENTED_EDGE('',*,*,#193298,.T.); +#195298 = ORIENTED_EDGE('',*,*,#193329,.T.); +#195299 = ORIENTED_EDGE('',*,*,#193360,.T.); +#195300 = ORIENTED_EDGE('',*,*,#193391,.T.); +#195301 = ORIENTED_EDGE('',*,*,#193422,.T.); +#195302 = ORIENTED_EDGE('',*,*,#193453,.T.); +#195303 = ORIENTED_EDGE('',*,*,#193484,.T.); +#195304 = ORIENTED_EDGE('',*,*,#193515,.T.); +#195305 = ORIENTED_EDGE('',*,*,#193546,.T.); +#195306 = ORIENTED_EDGE('',*,*,#193577,.T.); +#195307 = ORIENTED_EDGE('',*,*,#193608,.T.); +#195308 = ORIENTED_EDGE('',*,*,#193639,.T.); +#195309 = ORIENTED_EDGE('',*,*,#193670,.T.); +#195310 = ORIENTED_EDGE('',*,*,#193701,.T.); +#195311 = ORIENTED_EDGE('',*,*,#193732,.T.); +#195312 = ORIENTED_EDGE('',*,*,#193763,.T.); +#195313 = ORIENTED_EDGE('',*,*,#193794,.T.); +#195314 = ORIENTED_EDGE('',*,*,#193825,.T.); +#195315 = ORIENTED_EDGE('',*,*,#193856,.T.); +#195316 = ORIENTED_EDGE('',*,*,#193887,.T.); +#195317 = ORIENTED_EDGE('',*,*,#193918,.T.); +#195318 = ORIENTED_EDGE('',*,*,#193949,.T.); +#195319 = ORIENTED_EDGE('',*,*,#193980,.T.); +#195320 = ORIENTED_EDGE('',*,*,#194011,.T.); +#195321 = ORIENTED_EDGE('',*,*,#194042,.T.); +#195322 = ORIENTED_EDGE('',*,*,#194073,.T.); +#195323 = ORIENTED_EDGE('',*,*,#194104,.T.); +#195324 = ORIENTED_EDGE('',*,*,#194135,.T.); +#195325 = ORIENTED_EDGE('',*,*,#194166,.T.); +#195326 = ORIENTED_EDGE('',*,*,#194197,.T.); +#195327 = ORIENTED_EDGE('',*,*,#194230,.T.); +#195328 = ORIENTED_EDGE('',*,*,#194261,.T.); +#195329 = ORIENTED_EDGE('',*,*,#194292,.T.); +#195330 = ORIENTED_EDGE('',*,*,#194323,.T.); +#195331 = ORIENTED_EDGE('',*,*,#194354,.T.); +#195332 = ORIENTED_EDGE('',*,*,#194385,.T.); +#195333 = ORIENTED_EDGE('',*,*,#194416,.T.); +#195334 = ORIENTED_EDGE('',*,*,#194447,.T.); +#195335 = ORIENTED_EDGE('',*,*,#194478,.T.); +#195336 = ORIENTED_EDGE('',*,*,#194509,.T.); +#195337 = ORIENTED_EDGE('',*,*,#194540,.T.); +#195338 = ORIENTED_EDGE('',*,*,#194571,.T.); +#195339 = ORIENTED_EDGE('',*,*,#194602,.T.); +#195340 = ORIENTED_EDGE('',*,*,#194633,.T.); +#195341 = ORIENTED_EDGE('',*,*,#194664,.T.); +#195342 = ORIENTED_EDGE('',*,*,#194695,.T.); +#195343 = ORIENTED_EDGE('',*,*,#194726,.T.); +#195344 = ORIENTED_EDGE('',*,*,#194757,.T.); +#195345 = ORIENTED_EDGE('',*,*,#194788,.T.); +#195346 = ORIENTED_EDGE('',*,*,#194819,.T.); +#195347 = ORIENTED_EDGE('',*,*,#194850,.T.); +#195348 = ORIENTED_EDGE('',*,*,#194881,.T.); +#195349 = ORIENTED_EDGE('',*,*,#194912,.T.); +#195350 = ORIENTED_EDGE('',*,*,#194943,.T.); +#195351 = ORIENTED_EDGE('',*,*,#194974,.T.); +#195352 = ORIENTED_EDGE('',*,*,#195005,.T.); +#195353 = ORIENTED_EDGE('',*,*,#195036,.T.); +#195354 = ORIENTED_EDGE('',*,*,#195067,.T.); +#195355 = ORIENTED_EDGE('',*,*,#195098,.T.); +#195356 = ORIENTED_EDGE('',*,*,#195131,.T.); +#195357 = FACE_BOUND('',#195358,.T.); +#195358 = EDGE_LOOP('',(#195359)); +#195359 = ORIENTED_EDGE('',*,*,#195162,.T.); +#195360 = FACE_BOUND('',#195361,.T.); +#195361 = EDGE_LOOP('',(#195362)); +#195362 = ORIENTED_EDGE('',*,*,#195195,.T.); +#195363 = PLANE('',#195364); +#195364 = AXIS2_PLACEMENT_3D('',#195365,#195366,#195367); +#195365 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#195366 = DIRECTION('',(-0.,-0.,-1.)); +#195367 = DIRECTION('',(-1.,0.,0.)); +#195368 = MANIFOLD_SOLID_BREP('',#195369); +#195369 = CLOSED_SHELL('',(#195370,#195410,#195441,#195472,#195503, + #195534,#195565,#195596,#195627,#195658,#195689,#195720,#195751, + #195782,#195813,#195844,#195875,#195906,#195939,#195970,#196001, + #196034,#196065,#196096,#196127,#196158,#196189,#196222,#196253, + #196284,#196315,#196346,#196379,#196401,#196434,#196478)); +#195370 = ADVANCED_FACE('',(#195371),#195405,.T.); +#195371 = FACE_BOUND('',#195372,.T.); +#195372 = EDGE_LOOP('',(#195373,#195383,#195391,#195399)); +#195373 = ORIENTED_EDGE('',*,*,#195374,.T.); +#195374 = EDGE_CURVE('',#195375,#195377,#195379,.T.); +#195375 = VERTEX_POINT('',#195376); +#195376 = CARTESIAN_POINT('',(133.781131,-116.3,1.51)); +#195377 = VERTEX_POINT('',#195378); +#195378 = CARTESIAN_POINT('',(133.781131,-116.3,1.545)); +#195379 = LINE('',#195380,#195381); +#195380 = CARTESIAN_POINT('',(133.781131,-116.3,1.51)); +#195381 = VECTOR('',#195382,1.); +#195382 = DIRECTION('',(0.,0.,1.)); +#195383 = ORIENTED_EDGE('',*,*,#195384,.T.); +#195384 = EDGE_CURVE('',#195377,#195385,#195387,.T.); +#195385 = VERTEX_POINT('',#195386); +#195386 = CARTESIAN_POINT('',(134.110475,-116.301921,1.545)); +#195387 = LINE('',#195388,#195389); +#195388 = CARTESIAN_POINT('',(133.781131,-116.3,1.545)); +#195389 = VECTOR('',#195390,1.); +#195390 = DIRECTION('',(0.999982989615,-5.832707816284E-03,0.)); +#195391 = ORIENTED_EDGE('',*,*,#195392,.F.); +#195392 = EDGE_CURVE('',#195393,#195385,#195395,.T.); +#195393 = VERTEX_POINT('',#195394); +#195394 = CARTESIAN_POINT('',(134.110475,-116.301921,1.51)); +#195395 = LINE('',#195396,#195397); +#195396 = CARTESIAN_POINT('',(134.110475,-116.301921,1.51)); +#195397 = VECTOR('',#195398,1.); +#195398 = DIRECTION('',(0.,0.,1.)); +#195399 = ORIENTED_EDGE('',*,*,#195400,.F.); +#195400 = EDGE_CURVE('',#195375,#195393,#195401,.T.); +#195401 = LINE('',#195402,#195403); +#195402 = CARTESIAN_POINT('',(133.781131,-116.3,1.51)); +#195403 = VECTOR('',#195404,1.); +#195404 = DIRECTION('',(0.999982989615,-5.832707816284E-03,0.)); +#195405 = PLANE('',#195406); +#195406 = AXIS2_PLACEMENT_3D('',#195407,#195408,#195409); +#195407 = CARTESIAN_POINT('',(133.781131,-116.3,1.51)); +#195408 = DIRECTION('',(5.832707816284E-03,0.999982989615,-0.)); +#195409 = DIRECTION('',(0.999982989615,-5.832707816284E-03,0.)); +#195410 = ADVANCED_FACE('',(#195411),#195436,.T.); +#195411 = FACE_BOUND('',#195412,.T.); +#195412 = EDGE_LOOP('',(#195413,#195414,#195422,#195430)); +#195413 = ORIENTED_EDGE('',*,*,#195392,.T.); +#195414 = ORIENTED_EDGE('',*,*,#195415,.T.); +#195415 = EDGE_CURVE('',#195385,#195416,#195418,.T.); +#195416 = VERTEX_POINT('',#195417); +#195417 = CARTESIAN_POINT('',(134.146523,-116.316853,1.545)); +#195418 = LINE('',#195419,#195420); +#195419 = CARTESIAN_POINT('',(134.110475,-116.301921,1.545)); +#195420 = VECTOR('',#195421,1.); +#195421 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195422 = ORIENTED_EDGE('',*,*,#195423,.F.); +#195423 = EDGE_CURVE('',#195424,#195416,#195426,.T.); +#195424 = VERTEX_POINT('',#195425); +#195425 = CARTESIAN_POINT('',(134.146523,-116.316853,1.51)); +#195426 = LINE('',#195427,#195428); +#195427 = CARTESIAN_POINT('',(134.146523,-116.316853,1.51)); +#195428 = VECTOR('',#195429,1.); +#195429 = DIRECTION('',(0.,0.,1.)); +#195430 = ORIENTED_EDGE('',*,*,#195431,.F.); +#195431 = EDGE_CURVE('',#195393,#195424,#195432,.T.); +#195432 = LINE('',#195433,#195434); +#195433 = CARTESIAN_POINT('',(134.110475,-116.301921,1.51)); +#195434 = VECTOR('',#195435,1.); +#195435 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195436 = PLANE('',#195437); +#195437 = AXIS2_PLACEMENT_3D('',#195438,#195439,#195440); +#195438 = CARTESIAN_POINT('',(134.110475,-116.301921,1.51)); +#195439 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#195440 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195441 = ADVANCED_FACE('',(#195442),#195467,.T.); +#195442 = FACE_BOUND('',#195443,.T.); +#195443 = EDGE_LOOP('',(#195444,#195445,#195453,#195461)); +#195444 = ORIENTED_EDGE('',*,*,#195423,.T.); +#195445 = ORIENTED_EDGE('',*,*,#195446,.T.); +#195446 = EDGE_CURVE('',#195416,#195447,#195449,.T.); +#195447 = VERTEX_POINT('',#195448); +#195448 = CARTESIAN_POINT('',(135.083147,-117.253477,1.545)); +#195449 = LINE('',#195450,#195451); +#195450 = CARTESIAN_POINT('',(134.146523,-116.316853,1.545)); +#195451 = VECTOR('',#195452,1.); +#195452 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195453 = ORIENTED_EDGE('',*,*,#195454,.F.); +#195454 = EDGE_CURVE('',#195455,#195447,#195457,.T.); +#195455 = VERTEX_POINT('',#195456); +#195456 = CARTESIAN_POINT('',(135.083147,-117.253477,1.51)); +#195457 = LINE('',#195458,#195459); +#195458 = CARTESIAN_POINT('',(135.083147,-117.253477,1.51)); +#195459 = VECTOR('',#195460,1.); +#195460 = DIRECTION('',(0.,0.,1.)); +#195461 = ORIENTED_EDGE('',*,*,#195462,.F.); +#195462 = EDGE_CURVE('',#195424,#195455,#195463,.T.); +#195463 = LINE('',#195464,#195465); +#195464 = CARTESIAN_POINT('',(134.146523,-116.316853,1.51)); +#195465 = VECTOR('',#195466,1.); +#195466 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195467 = PLANE('',#195468); +#195468 = AXIS2_PLACEMENT_3D('',#195469,#195470,#195471); +#195469 = CARTESIAN_POINT('',(134.146523,-116.316853,1.51)); +#195470 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#195471 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195472 = ADVANCED_FACE('',(#195473),#195498,.T.); +#195473 = FACE_BOUND('',#195474,.T.); +#195474 = EDGE_LOOP('',(#195475,#195476,#195484,#195492)); +#195475 = ORIENTED_EDGE('',*,*,#195454,.T.); +#195476 = ORIENTED_EDGE('',*,*,#195477,.T.); +#195477 = EDGE_CURVE('',#195447,#195478,#195480,.T.); +#195478 = VERTEX_POINT('',#195479); +#195479 = CARTESIAN_POINT('',(135.098079,-117.289525,1.545)); +#195480 = LINE('',#195481,#195482); +#195481 = CARTESIAN_POINT('',(135.083147,-117.253477,1.545)); +#195482 = VECTOR('',#195483,1.); +#195483 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195484 = ORIENTED_EDGE('',*,*,#195485,.F.); +#195485 = EDGE_CURVE('',#195486,#195478,#195488,.T.); +#195486 = VERTEX_POINT('',#195487); +#195487 = CARTESIAN_POINT('',(135.098079,-117.289525,1.51)); +#195488 = LINE('',#195489,#195490); +#195489 = CARTESIAN_POINT('',(135.098079,-117.289525,1.51)); +#195490 = VECTOR('',#195491,1.); +#195491 = DIRECTION('',(0.,0.,1.)); +#195492 = ORIENTED_EDGE('',*,*,#195493,.F.); +#195493 = EDGE_CURVE('',#195455,#195486,#195494,.T.); +#195494 = LINE('',#195495,#195496); +#195495 = CARTESIAN_POINT('',(135.083147,-117.253477,1.51)); +#195496 = VECTOR('',#195497,1.); +#195497 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195498 = PLANE('',#195499); +#195499 = AXIS2_PLACEMENT_3D('',#195500,#195501,#195502); +#195500 = CARTESIAN_POINT('',(135.083147,-117.253477,1.51)); +#195501 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#195502 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195503 = ADVANCED_FACE('',(#195504),#195529,.T.); +#195504 = FACE_BOUND('',#195505,.T.); +#195505 = EDGE_LOOP('',(#195506,#195507,#195515,#195523)); +#195506 = ORIENTED_EDGE('',*,*,#195485,.T.); +#195507 = ORIENTED_EDGE('',*,*,#195508,.T.); +#195508 = EDGE_CURVE('',#195478,#195509,#195511,.T.); +#195509 = VERTEX_POINT('',#195510); +#195510 = CARTESIAN_POINT('',(135.1,-119.05,1.545)); +#195511 = LINE('',#195512,#195513); +#195512 = CARTESIAN_POINT('',(135.098079,-117.289525,1.545)); +#195513 = VECTOR('',#195514,1.); +#195514 = DIRECTION('',(1.091182127741E-03,-0.999999404661,0.)); +#195515 = ORIENTED_EDGE('',*,*,#195516,.F.); +#195516 = EDGE_CURVE('',#195517,#195509,#195519,.T.); +#195517 = VERTEX_POINT('',#195518); +#195518 = CARTESIAN_POINT('',(135.1,-119.05,1.51)); +#195519 = LINE('',#195520,#195521); +#195520 = CARTESIAN_POINT('',(135.1,-119.05,1.51)); +#195521 = VECTOR('',#195522,1.); +#195522 = DIRECTION('',(0.,0.,1.)); +#195523 = ORIENTED_EDGE('',*,*,#195524,.F.); +#195524 = EDGE_CURVE('',#195486,#195517,#195525,.T.); +#195525 = LINE('',#195526,#195527); +#195526 = CARTESIAN_POINT('',(135.098079,-117.289525,1.51)); +#195527 = VECTOR('',#195528,1.); +#195528 = DIRECTION('',(1.091182127741E-03,-0.999999404661,0.)); +#195529 = PLANE('',#195530); +#195530 = AXIS2_PLACEMENT_3D('',#195531,#195532,#195533); +#195531 = CARTESIAN_POINT('',(135.098079,-117.289525,1.51)); +#195532 = DIRECTION('',(0.999999404661,1.091182127741E-03,-0.)); +#195533 = DIRECTION('',(1.091182127741E-03,-0.999999404661,0.)); +#195534 = ADVANCED_FACE('',(#195535),#195560,.T.); +#195535 = FACE_BOUND('',#195536,.T.); +#195536 = EDGE_LOOP('',(#195537,#195538,#195546,#195554)); +#195537 = ORIENTED_EDGE('',*,*,#195516,.T.); +#195538 = ORIENTED_EDGE('',*,*,#195539,.T.); +#195539 = EDGE_CURVE('',#195509,#195540,#195542,.T.); +#195540 = VERTEX_POINT('',#195541); +#195541 = CARTESIAN_POINT('',(135.268038,-119.051921,1.545)); +#195542 = LINE('',#195543,#195544); +#195543 = CARTESIAN_POINT('',(135.1,-119.05,1.545)); +#195544 = VECTOR('',#195545,1.); +#195545 = DIRECTION('',(0.999934661801,-1.143119107175E-02,0.)); +#195546 = ORIENTED_EDGE('',*,*,#195547,.F.); +#195547 = EDGE_CURVE('',#195548,#195540,#195550,.T.); +#195548 = VERTEX_POINT('',#195549); +#195549 = CARTESIAN_POINT('',(135.268038,-119.051921,1.51)); +#195550 = LINE('',#195551,#195552); +#195551 = CARTESIAN_POINT('',(135.268038,-119.051921,1.51)); +#195552 = VECTOR('',#195553,1.); +#195553 = DIRECTION('',(0.,0.,1.)); +#195554 = ORIENTED_EDGE('',*,*,#195555,.F.); +#195555 = EDGE_CURVE('',#195517,#195548,#195556,.T.); +#195556 = LINE('',#195557,#195558); +#195557 = CARTESIAN_POINT('',(135.1,-119.05,1.51)); +#195558 = VECTOR('',#195559,1.); +#195559 = DIRECTION('',(0.999934661801,-1.143119107175E-02,0.)); +#195560 = PLANE('',#195561); +#195561 = AXIS2_PLACEMENT_3D('',#195562,#195563,#195564); +#195562 = CARTESIAN_POINT('',(135.1,-119.05,1.51)); +#195563 = DIRECTION('',(1.143119107175E-02,0.999934661801,-0.)); +#195564 = DIRECTION('',(0.999934661801,-1.143119107175E-02,0.)); +#195565 = ADVANCED_FACE('',(#195566),#195591,.T.); +#195566 = FACE_BOUND('',#195567,.T.); +#195567 = EDGE_LOOP('',(#195568,#195569,#195577,#195585)); +#195568 = ORIENTED_EDGE('',*,*,#195547,.T.); +#195569 = ORIENTED_EDGE('',*,*,#195570,.T.); +#195570 = EDGE_CURVE('',#195540,#195571,#195573,.T.); +#195571 = VERTEX_POINT('',#195572); +#195572 = CARTESIAN_POINT('',(135.304086,-119.066853,1.545)); +#195573 = LINE('',#195574,#195575); +#195574 = CARTESIAN_POINT('',(135.268038,-119.051921,1.545)); +#195575 = VECTOR('',#195576,1.); +#195576 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195577 = ORIENTED_EDGE('',*,*,#195578,.F.); +#195578 = EDGE_CURVE('',#195579,#195571,#195581,.T.); +#195579 = VERTEX_POINT('',#195580); +#195580 = CARTESIAN_POINT('',(135.304086,-119.066853,1.51)); +#195581 = LINE('',#195582,#195583); +#195582 = CARTESIAN_POINT('',(135.304086,-119.066853,1.51)); +#195583 = VECTOR('',#195584,1.); +#195584 = DIRECTION('',(0.,0.,1.)); +#195585 = ORIENTED_EDGE('',*,*,#195586,.F.); +#195586 = EDGE_CURVE('',#195548,#195579,#195587,.T.); +#195587 = LINE('',#195588,#195589); +#195588 = CARTESIAN_POINT('',(135.268038,-119.051921,1.51)); +#195589 = VECTOR('',#195590,1.); +#195590 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195591 = PLANE('',#195592); +#195592 = AXIS2_PLACEMENT_3D('',#195593,#195594,#195595); +#195593 = CARTESIAN_POINT('',(135.268038,-119.051921,1.51)); +#195594 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#195595 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195596 = ADVANCED_FACE('',(#195597),#195622,.T.); +#195597 = FACE_BOUND('',#195598,.T.); +#195598 = EDGE_LOOP('',(#195599,#195600,#195608,#195616)); +#195599 = ORIENTED_EDGE('',*,*,#195578,.T.); +#195600 = ORIENTED_EDGE('',*,*,#195601,.T.); +#195601 = EDGE_CURVE('',#195571,#195602,#195604,.T.); +#195602 = VERTEX_POINT('',#195603); +#195603 = CARTESIAN_POINT('',(135.683147,-119.445914,1.545)); +#195604 = LINE('',#195605,#195606); +#195605 = CARTESIAN_POINT('',(135.304086,-119.066853,1.545)); +#195606 = VECTOR('',#195607,1.); +#195607 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195608 = ORIENTED_EDGE('',*,*,#195609,.F.); +#195609 = EDGE_CURVE('',#195610,#195602,#195612,.T.); +#195610 = VERTEX_POINT('',#195611); +#195611 = CARTESIAN_POINT('',(135.683147,-119.445914,1.51)); +#195612 = LINE('',#195613,#195614); +#195613 = CARTESIAN_POINT('',(135.683147,-119.445914,1.51)); +#195614 = VECTOR('',#195615,1.); +#195615 = DIRECTION('',(0.,0.,1.)); +#195616 = ORIENTED_EDGE('',*,*,#195617,.F.); +#195617 = EDGE_CURVE('',#195579,#195610,#195618,.T.); +#195618 = LINE('',#195619,#195620); +#195619 = CARTESIAN_POINT('',(135.304086,-119.066853,1.51)); +#195620 = VECTOR('',#195621,1.); +#195621 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195622 = PLANE('',#195623); +#195623 = AXIS2_PLACEMENT_3D('',#195624,#195625,#195626); +#195624 = CARTESIAN_POINT('',(135.304086,-119.066853,1.51)); +#195625 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#195626 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195627 = ADVANCED_FACE('',(#195628),#195653,.T.); +#195628 = FACE_BOUND('',#195629,.T.); +#195629 = EDGE_LOOP('',(#195630,#195631,#195639,#195647)); +#195630 = ORIENTED_EDGE('',*,*,#195609,.T.); +#195631 = ORIENTED_EDGE('',*,*,#195632,.T.); +#195632 = EDGE_CURVE('',#195602,#195633,#195635,.T.); +#195633 = VERTEX_POINT('',#195634); +#195634 = CARTESIAN_POINT('',(135.698079,-119.481962,1.545)); +#195635 = LINE('',#195636,#195637); +#195636 = CARTESIAN_POINT('',(135.683147,-119.445914,1.545)); +#195637 = VECTOR('',#195638,1.); +#195638 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195639 = ORIENTED_EDGE('',*,*,#195640,.F.); +#195640 = EDGE_CURVE('',#195641,#195633,#195643,.T.); +#195641 = VERTEX_POINT('',#195642); +#195642 = CARTESIAN_POINT('',(135.698079,-119.481962,1.51)); +#195643 = LINE('',#195644,#195645); +#195644 = CARTESIAN_POINT('',(135.698079,-119.481962,1.51)); +#195645 = VECTOR('',#195646,1.); +#195646 = DIRECTION('',(0.,0.,1.)); +#195647 = ORIENTED_EDGE('',*,*,#195648,.F.); +#195648 = EDGE_CURVE('',#195610,#195641,#195649,.T.); +#195649 = LINE('',#195650,#195651); +#195650 = CARTESIAN_POINT('',(135.683147,-119.445914,1.51)); +#195651 = VECTOR('',#195652,1.); +#195652 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195653 = PLANE('',#195654); +#195654 = AXIS2_PLACEMENT_3D('',#195655,#195656,#195657); +#195655 = CARTESIAN_POINT('',(135.683147,-119.445914,1.51)); +#195656 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#195657 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195658 = ADVANCED_FACE('',(#195659),#195684,.T.); +#195659 = FACE_BOUND('',#195660,.T.); +#195660 = EDGE_LOOP('',(#195661,#195662,#195670,#195678)); +#195661 = ORIENTED_EDGE('',*,*,#195640,.T.); +#195662 = ORIENTED_EDGE('',*,*,#195663,.T.); +#195663 = EDGE_CURVE('',#195633,#195664,#195666,.T.); +#195664 = VERTEX_POINT('',#195665); +#195665 = CARTESIAN_POINT('',(135.698079,-120.018038,1.545)); +#195666 = LINE('',#195667,#195668); +#195667 = CARTESIAN_POINT('',(135.698079,-119.481962,1.545)); +#195668 = VECTOR('',#195669,1.); +#195669 = DIRECTION('',(0.,-1.,0.)); +#195670 = ORIENTED_EDGE('',*,*,#195671,.F.); +#195671 = EDGE_CURVE('',#195672,#195664,#195674,.T.); +#195672 = VERTEX_POINT('',#195673); +#195673 = CARTESIAN_POINT('',(135.698079,-120.018038,1.51)); +#195674 = LINE('',#195675,#195676); +#195675 = CARTESIAN_POINT('',(135.698079,-120.018038,1.51)); +#195676 = VECTOR('',#195677,1.); +#195677 = DIRECTION('',(0.,0.,1.)); +#195678 = ORIENTED_EDGE('',*,*,#195679,.F.); +#195679 = EDGE_CURVE('',#195641,#195672,#195680,.T.); +#195680 = LINE('',#195681,#195682); +#195681 = CARTESIAN_POINT('',(135.698079,-119.481962,1.51)); +#195682 = VECTOR('',#195683,1.); +#195683 = DIRECTION('',(0.,-1.,0.)); +#195684 = PLANE('',#195685); +#195685 = AXIS2_PLACEMENT_3D('',#195686,#195687,#195688); +#195686 = CARTESIAN_POINT('',(135.698079,-119.481962,1.51)); +#195687 = DIRECTION('',(1.,0.,-0.)); +#195688 = DIRECTION('',(0.,-1.,0.)); +#195689 = ADVANCED_FACE('',(#195690),#195715,.T.); +#195690 = FACE_BOUND('',#195691,.T.); +#195691 = EDGE_LOOP('',(#195692,#195693,#195701,#195709)); +#195692 = ORIENTED_EDGE('',*,*,#195671,.T.); +#195693 = ORIENTED_EDGE('',*,*,#195694,.T.); +#195694 = EDGE_CURVE('',#195664,#195695,#195697,.T.); +#195695 = VERTEX_POINT('',#195696); +#195696 = CARTESIAN_POINT('',(135.683147,-120.054086,1.545)); +#195697 = LINE('',#195698,#195699); +#195698 = CARTESIAN_POINT('',(135.698079,-120.018038,1.545)); +#195699 = VECTOR('',#195700,1.); +#195700 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195701 = ORIENTED_EDGE('',*,*,#195702,.F.); +#195702 = EDGE_CURVE('',#195703,#195695,#195705,.T.); +#195703 = VERTEX_POINT('',#195704); +#195704 = CARTESIAN_POINT('',(135.683147,-120.054086,1.51)); +#195705 = LINE('',#195706,#195707); +#195706 = CARTESIAN_POINT('',(135.683147,-120.054086,1.51)); +#195707 = VECTOR('',#195708,1.); +#195708 = DIRECTION('',(0.,0.,1.)); +#195709 = ORIENTED_EDGE('',*,*,#195710,.F.); +#195710 = EDGE_CURVE('',#195672,#195703,#195711,.T.); +#195711 = LINE('',#195712,#195713); +#195712 = CARTESIAN_POINT('',(135.698079,-120.018038,1.51)); +#195713 = VECTOR('',#195714,1.); +#195714 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195715 = PLANE('',#195716); +#195716 = AXIS2_PLACEMENT_3D('',#195717,#195718,#195719); +#195717 = CARTESIAN_POINT('',(135.698079,-120.018038,1.51)); +#195718 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195719 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195720 = ADVANCED_FACE('',(#195721),#195746,.T.); +#195721 = FACE_BOUND('',#195722,.T.); +#195722 = EDGE_LOOP('',(#195723,#195724,#195732,#195740)); +#195723 = ORIENTED_EDGE('',*,*,#195702,.T.); +#195724 = ORIENTED_EDGE('',*,*,#195725,.T.); +#195725 = EDGE_CURVE('',#195695,#195726,#195728,.T.); +#195726 = VERTEX_POINT('',#195727); +#195727 = CARTESIAN_POINT('',(135.304086,-120.433147,1.545)); +#195728 = LINE('',#195729,#195730); +#195729 = CARTESIAN_POINT('',(135.683147,-120.054086,1.545)); +#195730 = VECTOR('',#195731,1.); +#195731 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195732 = ORIENTED_EDGE('',*,*,#195733,.F.); +#195733 = EDGE_CURVE('',#195734,#195726,#195736,.T.); +#195734 = VERTEX_POINT('',#195735); +#195735 = CARTESIAN_POINT('',(135.304086,-120.433147,1.51)); +#195736 = LINE('',#195737,#195738); +#195737 = CARTESIAN_POINT('',(135.304086,-120.433147,1.51)); +#195738 = VECTOR('',#195739,1.); +#195739 = DIRECTION('',(0.,0.,1.)); +#195740 = ORIENTED_EDGE('',*,*,#195741,.F.); +#195741 = EDGE_CURVE('',#195703,#195734,#195742,.T.); +#195742 = LINE('',#195743,#195744); +#195743 = CARTESIAN_POINT('',(135.683147,-120.054086,1.51)); +#195744 = VECTOR('',#195745,1.); +#195745 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195746 = PLANE('',#195747); +#195747 = AXIS2_PLACEMENT_3D('',#195748,#195749,#195750); +#195748 = CARTESIAN_POINT('',(135.683147,-120.054086,1.51)); +#195749 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195750 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195751 = ADVANCED_FACE('',(#195752),#195777,.T.); +#195752 = FACE_BOUND('',#195753,.T.); +#195753 = EDGE_LOOP('',(#195754,#195755,#195763,#195771)); +#195754 = ORIENTED_EDGE('',*,*,#195733,.T.); +#195755 = ORIENTED_EDGE('',*,*,#195756,.T.); +#195756 = EDGE_CURVE('',#195726,#195757,#195759,.T.); +#195757 = VERTEX_POINT('',#195758); +#195758 = CARTESIAN_POINT('',(135.268038,-120.448079,1.545)); +#195759 = LINE('',#195760,#195761); +#195760 = CARTESIAN_POINT('',(135.304086,-120.433147,1.545)); +#195761 = VECTOR('',#195762,1.); +#195762 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#195763 = ORIENTED_EDGE('',*,*,#195764,.F.); +#195764 = EDGE_CURVE('',#195765,#195757,#195767,.T.); +#195765 = VERTEX_POINT('',#195766); +#195766 = CARTESIAN_POINT('',(135.268038,-120.448079,1.51)); +#195767 = LINE('',#195768,#195769); +#195768 = CARTESIAN_POINT('',(135.268038,-120.448079,1.51)); +#195769 = VECTOR('',#195770,1.); +#195770 = DIRECTION('',(0.,0.,1.)); +#195771 = ORIENTED_EDGE('',*,*,#195772,.F.); +#195772 = EDGE_CURVE('',#195734,#195765,#195773,.T.); +#195773 = LINE('',#195774,#195775); +#195774 = CARTESIAN_POINT('',(135.304086,-120.433147,1.51)); +#195775 = VECTOR('',#195776,1.); +#195776 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#195777 = PLANE('',#195778); +#195778 = AXIS2_PLACEMENT_3D('',#195779,#195780,#195781); +#195779 = CARTESIAN_POINT('',(135.304086,-120.433147,1.51)); +#195780 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#195781 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#195782 = ADVANCED_FACE('',(#195783),#195808,.T.); +#195783 = FACE_BOUND('',#195784,.T.); +#195784 = EDGE_LOOP('',(#195785,#195786,#195794,#195802)); +#195785 = ORIENTED_EDGE('',*,*,#195764,.T.); +#195786 = ORIENTED_EDGE('',*,*,#195787,.T.); +#195787 = EDGE_CURVE('',#195757,#195788,#195790,.T.); +#195788 = VERTEX_POINT('',#195789); +#195789 = CARTESIAN_POINT('',(135.1,-120.45,1.545)); +#195790 = LINE('',#195791,#195792); +#195791 = CARTESIAN_POINT('',(135.268038,-120.448079,1.545)); +#195792 = VECTOR('',#195793,1.); +#195793 = DIRECTION('',(-0.999934661801,-1.143119107175E-02,0.)); +#195794 = ORIENTED_EDGE('',*,*,#195795,.F.); +#195795 = EDGE_CURVE('',#195796,#195788,#195798,.T.); +#195796 = VERTEX_POINT('',#195797); +#195797 = CARTESIAN_POINT('',(135.1,-120.45,1.51)); +#195798 = LINE('',#195799,#195800); +#195799 = CARTESIAN_POINT('',(135.1,-120.45,1.51)); +#195800 = VECTOR('',#195801,1.); +#195801 = DIRECTION('',(0.,0.,1.)); +#195802 = ORIENTED_EDGE('',*,*,#195803,.F.); +#195803 = EDGE_CURVE('',#195765,#195796,#195804,.T.); +#195804 = LINE('',#195805,#195806); +#195805 = CARTESIAN_POINT('',(135.268038,-120.448079,1.51)); +#195806 = VECTOR('',#195807,1.); +#195807 = DIRECTION('',(-0.999934661801,-1.143119107175E-02,0.)); +#195808 = PLANE('',#195809); +#195809 = AXIS2_PLACEMENT_3D('',#195810,#195811,#195812); +#195810 = CARTESIAN_POINT('',(135.268038,-120.448079,1.51)); +#195811 = DIRECTION('',(1.143119107175E-02,-0.999934661801,0.)); +#195812 = DIRECTION('',(-0.999934661801,-1.143119107175E-02,0.)); +#195813 = ADVANCED_FACE('',(#195814),#195839,.T.); +#195814 = FACE_BOUND('',#195815,.T.); +#195815 = EDGE_LOOP('',(#195816,#195817,#195825,#195833)); +#195816 = ORIENTED_EDGE('',*,*,#195795,.T.); +#195817 = ORIENTED_EDGE('',*,*,#195818,.T.); +#195818 = EDGE_CURVE('',#195788,#195819,#195821,.T.); +#195819 = VERTEX_POINT('',#195820); +#195820 = CARTESIAN_POINT('',(135.098079,-120.769509,1.545)); +#195821 = LINE('',#195822,#195823); +#195822 = CARTESIAN_POINT('',(135.1,-120.45,1.545)); +#195823 = VECTOR('',#195824,1.); +#195824 = DIRECTION('',(-6.012241534442E-03,-0.999981926313,0.)); +#195825 = ORIENTED_EDGE('',*,*,#195826,.F.); +#195826 = EDGE_CURVE('',#195827,#195819,#195829,.T.); +#195827 = VERTEX_POINT('',#195828); +#195828 = CARTESIAN_POINT('',(135.098079,-120.769509,1.51)); +#195829 = LINE('',#195830,#195831); +#195830 = CARTESIAN_POINT('',(135.098079,-120.769509,1.51)); +#195831 = VECTOR('',#195832,1.); +#195832 = DIRECTION('',(0.,0.,1.)); +#195833 = ORIENTED_EDGE('',*,*,#195834,.F.); +#195834 = EDGE_CURVE('',#195796,#195827,#195835,.T.); +#195835 = LINE('',#195836,#195837); +#195836 = CARTESIAN_POINT('',(135.1,-120.45,1.51)); +#195837 = VECTOR('',#195838,1.); +#195838 = DIRECTION('',(-6.012241534442E-03,-0.999981926313,0.)); +#195839 = PLANE('',#195840); +#195840 = AXIS2_PLACEMENT_3D('',#195841,#195842,#195843); +#195841 = CARTESIAN_POINT('',(135.1,-120.45,1.51)); +#195842 = DIRECTION('',(0.999981926313,-6.012241534442E-03,0.)); +#195843 = DIRECTION('',(-6.012241534442E-03,-0.999981926313,0.)); +#195844 = ADVANCED_FACE('',(#195845),#195870,.T.); +#195845 = FACE_BOUND('',#195846,.T.); +#195846 = EDGE_LOOP('',(#195847,#195848,#195856,#195864)); +#195847 = ORIENTED_EDGE('',*,*,#195826,.T.); +#195848 = ORIENTED_EDGE('',*,*,#195849,.T.); +#195849 = EDGE_CURVE('',#195819,#195850,#195852,.T.); +#195850 = VERTEX_POINT('',#195851); +#195851 = CARTESIAN_POINT('',(135.083147,-120.805557,1.545)); +#195852 = LINE('',#195853,#195854); +#195853 = CARTESIAN_POINT('',(135.098079,-120.769509,1.545)); +#195854 = VECTOR('',#195855,1.); +#195855 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195856 = ORIENTED_EDGE('',*,*,#195857,.F.); +#195857 = EDGE_CURVE('',#195858,#195850,#195860,.T.); +#195858 = VERTEX_POINT('',#195859); +#195859 = CARTESIAN_POINT('',(135.083147,-120.805557,1.51)); +#195860 = LINE('',#195861,#195862); +#195861 = CARTESIAN_POINT('',(135.083147,-120.805557,1.51)); +#195862 = VECTOR('',#195863,1.); +#195863 = DIRECTION('',(0.,0.,1.)); +#195864 = ORIENTED_EDGE('',*,*,#195865,.F.); +#195865 = EDGE_CURVE('',#195827,#195858,#195866,.T.); +#195866 = LINE('',#195867,#195868); +#195867 = CARTESIAN_POINT('',(135.098079,-120.769509,1.51)); +#195868 = VECTOR('',#195869,1.); +#195869 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195870 = PLANE('',#195871); +#195871 = AXIS2_PLACEMENT_3D('',#195872,#195873,#195874); +#195872 = CARTESIAN_POINT('',(135.098079,-120.769509,1.51)); +#195873 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#195874 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#195875 = ADVANCED_FACE('',(#195876),#195901,.T.); +#195876 = FACE_BOUND('',#195877,.T.); +#195877 = EDGE_LOOP('',(#195878,#195879,#195887,#195895)); +#195878 = ORIENTED_EDGE('',*,*,#195857,.T.); +#195879 = ORIENTED_EDGE('',*,*,#195880,.T.); +#195880 = EDGE_CURVE('',#195850,#195881,#195883,.T.); +#195881 = VERTEX_POINT('',#195882); +#195882 = CARTESIAN_POINT('',(134.555557,-121.333147,1.545)); +#195883 = LINE('',#195884,#195885); +#195884 = CARTESIAN_POINT('',(135.083147,-120.805557,1.545)); +#195885 = VECTOR('',#195886,1.); +#195886 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195887 = ORIENTED_EDGE('',*,*,#195888,.F.); +#195888 = EDGE_CURVE('',#195889,#195881,#195891,.T.); +#195889 = VERTEX_POINT('',#195890); +#195890 = CARTESIAN_POINT('',(134.555557,-121.333147,1.51)); +#195891 = LINE('',#195892,#195893); +#195892 = CARTESIAN_POINT('',(134.555557,-121.333147,1.51)); +#195893 = VECTOR('',#195894,1.); +#195894 = DIRECTION('',(0.,0.,1.)); +#195895 = ORIENTED_EDGE('',*,*,#195896,.F.); +#195896 = EDGE_CURVE('',#195858,#195889,#195897,.T.); +#195897 = LINE('',#195898,#195899); +#195898 = CARTESIAN_POINT('',(135.083147,-120.805557,1.51)); +#195899 = VECTOR('',#195900,1.); +#195900 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195901 = PLANE('',#195902); +#195902 = AXIS2_PLACEMENT_3D('',#195903,#195904,#195905); +#195903 = CARTESIAN_POINT('',(135.083147,-120.805557,1.51)); +#195904 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#195905 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#195906 = ADVANCED_FACE('',(#195907),#195934,.T.); +#195907 = FACE_BOUND('',#195908,.T.); +#195908 = EDGE_LOOP('',(#195909,#195910,#195919,#195927)); +#195909 = ORIENTED_EDGE('',*,*,#195888,.T.); +#195910 = ORIENTED_EDGE('',*,*,#195911,.T.); +#195911 = EDGE_CURVE('',#195881,#195912,#195914,.T.); +#195912 = VERTEX_POINT('',#195913); +#195913 = CARTESIAN_POINT('',(134.416853,-121.194443,1.545)); +#195914 = CIRCLE('',#195915,0.10000001929); +#195915 = AXIS2_PLACEMENT_3D('',#195916,#195917,#195918); +#195916 = CARTESIAN_POINT('',(134.5,-121.25,1.545)); +#195917 = DIRECTION('',(0.,0.,-1.)); +#195918 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#195919 = ORIENTED_EDGE('',*,*,#195920,.F.); +#195920 = EDGE_CURVE('',#195921,#195912,#195923,.T.); +#195921 = VERTEX_POINT('',#195922); +#195922 = CARTESIAN_POINT('',(134.416853,-121.194443,1.51)); +#195923 = LINE('',#195924,#195925); +#195924 = CARTESIAN_POINT('',(134.416853,-121.194443,1.51)); +#195925 = VECTOR('',#195926,1.); +#195926 = DIRECTION('',(0.,0.,1.)); +#195927 = ORIENTED_EDGE('',*,*,#195928,.F.); +#195928 = EDGE_CURVE('',#195889,#195921,#195929,.T.); +#195929 = CIRCLE('',#195930,0.10000001929); +#195930 = AXIS2_PLACEMENT_3D('',#195931,#195932,#195933); +#195931 = CARTESIAN_POINT('',(134.5,-121.25,1.51)); +#195932 = DIRECTION('',(0.,0.,-1.)); +#195933 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#195934 = CYLINDRICAL_SURFACE('',#195935,0.10000001929); +#195935 = AXIS2_PLACEMENT_3D('',#195936,#195937,#195938); +#195936 = CARTESIAN_POINT('',(134.5,-121.25,1.51)); +#195937 = DIRECTION('',(0.,0.,-1.)); +#195938 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#195939 = ADVANCED_FACE('',(#195940),#195965,.T.); +#195940 = FACE_BOUND('',#195941,.T.); +#195941 = EDGE_LOOP('',(#195942,#195943,#195951,#195959)); +#195942 = ORIENTED_EDGE('',*,*,#195920,.T.); +#195943 = ORIENTED_EDGE('',*,*,#195944,.T.); +#195944 = EDGE_CURVE('',#195912,#195945,#195947,.T.); +#195945 = VERTEX_POINT('',#195946); +#195946 = CARTESIAN_POINT('',(134.9,-120.708578,1.545)); +#195947 = LINE('',#195948,#195949); +#195948 = CARTESIAN_POINT('',(134.416853,-121.194443,1.545)); +#195949 = VECTOR('',#195950,1.); +#195950 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#195951 = ORIENTED_EDGE('',*,*,#195952,.F.); +#195952 = EDGE_CURVE('',#195953,#195945,#195955,.T.); +#195953 = VERTEX_POINT('',#195954); +#195954 = CARTESIAN_POINT('',(134.9,-120.708578,1.51)); +#195955 = LINE('',#195956,#195957); +#195956 = CARTESIAN_POINT('',(134.9,-120.708578,1.51)); +#195957 = VECTOR('',#195958,1.); +#195958 = DIRECTION('',(0.,0.,1.)); +#195959 = ORIENTED_EDGE('',*,*,#195960,.F.); +#195960 = EDGE_CURVE('',#195921,#195953,#195961,.T.); +#195961 = LINE('',#195962,#195963); +#195962 = CARTESIAN_POINT('',(134.416853,-121.194443,1.51)); +#195963 = VECTOR('',#195964,1.); +#195964 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#195965 = PLANE('',#195966); +#195966 = AXIS2_PLACEMENT_3D('',#195967,#195968,#195969); +#195967 = CARTESIAN_POINT('',(134.416853,-121.194443,1.51)); +#195968 = DIRECTION('',(-0.709087368916,0.705120630278,0.)); +#195969 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#195970 = ADVANCED_FACE('',(#195971),#195996,.T.); +#195971 = FACE_BOUND('',#195972,.T.); +#195972 = EDGE_LOOP('',(#195973,#195974,#195982,#195990)); +#195973 = ORIENTED_EDGE('',*,*,#195952,.T.); +#195974 = ORIENTED_EDGE('',*,*,#195975,.T.); +#195975 = EDGE_CURVE('',#195945,#195976,#195978,.T.); +#195976 = VERTEX_POINT('',#195977); +#195977 = CARTESIAN_POINT('',(134.901921,-120.330491,1.545)); +#195978 = LINE('',#195979,#195980); +#195979 = CARTESIAN_POINT('',(134.9,-120.708578,1.545)); +#195980 = VECTOR('',#195981,1.); +#195981 = DIRECTION('',(5.080775602454E-03,0.999987092776,0.)); +#195982 = ORIENTED_EDGE('',*,*,#195983,.F.); +#195983 = EDGE_CURVE('',#195984,#195976,#195986,.T.); +#195984 = VERTEX_POINT('',#195985); +#195985 = CARTESIAN_POINT('',(134.901921,-120.330491,1.51)); +#195986 = LINE('',#195987,#195988); +#195987 = CARTESIAN_POINT('',(134.901921,-120.330491,1.51)); +#195988 = VECTOR('',#195989,1.); +#195989 = DIRECTION('',(0.,0.,1.)); +#195990 = ORIENTED_EDGE('',*,*,#195991,.F.); +#195991 = EDGE_CURVE('',#195953,#195984,#195992,.T.); +#195992 = LINE('',#195993,#195994); +#195993 = CARTESIAN_POINT('',(134.9,-120.708578,1.51)); +#195994 = VECTOR('',#195995,1.); +#195995 = DIRECTION('',(5.080775602454E-03,0.999987092776,0.)); +#195996 = PLANE('',#195997); +#195997 = AXIS2_PLACEMENT_3D('',#195998,#195999,#196000); +#195998 = CARTESIAN_POINT('',(134.9,-120.708578,1.51)); +#195999 = DIRECTION('',(-0.999987092776,5.080775602454E-03,0.)); +#196000 = DIRECTION('',(5.080775602454E-03,0.999987092776,0.)); +#196001 = ADVANCED_FACE('',(#196002),#196029,.T.); +#196002 = FACE_BOUND('',#196003,.T.); +#196003 = EDGE_LOOP('',(#196004,#196005,#196014,#196022)); +#196004 = ORIENTED_EDGE('',*,*,#195983,.T.); +#196005 = ORIENTED_EDGE('',*,*,#196006,.T.); +#196006 = EDGE_CURVE('',#195976,#196007,#196009,.T.); +#196007 = VERTEX_POINT('',#196008); +#196008 = CARTESIAN_POINT('',(134.980491,-120.251921,1.545)); +#196009 = CIRCLE('',#196010,0.100002891901); +#196010 = AXIS2_PLACEMENT_3D('',#196011,#196012,#196013); +#196011 = CARTESIAN_POINT('',(135.00000207103,-120.350002071,1.545)); +#196012 = DIRECTION('',(0.,0.,-1.)); +#196013 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#196014 = ORIENTED_EDGE('',*,*,#196015,.F.); +#196015 = EDGE_CURVE('',#196016,#196007,#196018,.T.); +#196016 = VERTEX_POINT('',#196017); +#196017 = CARTESIAN_POINT('',(134.980491,-120.251921,1.51)); +#196018 = LINE('',#196019,#196020); +#196019 = CARTESIAN_POINT('',(134.980491,-120.251921,1.51)); +#196020 = VECTOR('',#196021,1.); +#196021 = DIRECTION('',(0.,0.,1.)); +#196022 = ORIENTED_EDGE('',*,*,#196023,.F.); +#196023 = EDGE_CURVE('',#195984,#196016,#196024,.T.); +#196024 = CIRCLE('',#196025,0.100002891901); +#196025 = AXIS2_PLACEMENT_3D('',#196026,#196027,#196028); +#196026 = CARTESIAN_POINT('',(135.00000207103,-120.350002071,1.51)); +#196027 = DIRECTION('',(0.,0.,-1.)); +#196028 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#196029 = CYLINDRICAL_SURFACE('',#196030,0.100002891901); +#196030 = AXIS2_PLACEMENT_3D('',#196031,#196032,#196033); +#196031 = CARTESIAN_POINT('',(135.00000207103,-120.350002071,1.51)); +#196032 = DIRECTION('',(0.,0.,-1.)); +#196033 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#196034 = ADVANCED_FACE('',(#196035),#196060,.T.); +#196035 = FACE_BOUND('',#196036,.T.); +#196036 = EDGE_LOOP('',(#196037,#196038,#196046,#196054)); +#196037 = ORIENTED_EDGE('',*,*,#196015,.T.); +#196038 = ORIENTED_EDGE('',*,*,#196039,.T.); +#196039 = EDGE_CURVE('',#196007,#196040,#196042,.T.); +#196040 = VERTEX_POINT('',#196041); +#196041 = CARTESIAN_POINT('',(135.207107,-120.25,1.545)); +#196042 = LINE('',#196043,#196044); +#196043 = CARTESIAN_POINT('',(134.980491,-120.251921,1.545)); +#196044 = VECTOR('',#196045,1.); +#196045 = DIRECTION('',(0.999964073063,8.476590286432E-03,0.)); +#196046 = ORIENTED_EDGE('',*,*,#196047,.F.); +#196047 = EDGE_CURVE('',#196048,#196040,#196050,.T.); +#196048 = VERTEX_POINT('',#196049); +#196049 = CARTESIAN_POINT('',(135.207107,-120.25,1.51)); +#196050 = LINE('',#196051,#196052); +#196051 = CARTESIAN_POINT('',(135.207107,-120.25,1.51)); +#196052 = VECTOR('',#196053,1.); +#196053 = DIRECTION('',(0.,0.,1.)); +#196054 = ORIENTED_EDGE('',*,*,#196055,.F.); +#196055 = EDGE_CURVE('',#196016,#196048,#196056,.T.); +#196056 = LINE('',#196057,#196058); +#196057 = CARTESIAN_POINT('',(134.980491,-120.251921,1.51)); +#196058 = VECTOR('',#196059,1.); +#196059 = DIRECTION('',(0.999964073063,8.476590286432E-03,0.)); +#196060 = PLANE('',#196061); +#196061 = AXIS2_PLACEMENT_3D('',#196062,#196063,#196064); +#196062 = CARTESIAN_POINT('',(134.980491,-120.251921,1.51)); +#196063 = DIRECTION('',(-8.476590286432E-03,0.999964073063,0.)); +#196064 = DIRECTION('',(0.999964073063,8.476590286432E-03,0.)); +#196065 = ADVANCED_FACE('',(#196066),#196091,.T.); +#196066 = FACE_BOUND('',#196067,.T.); +#196067 = EDGE_LOOP('',(#196068,#196069,#196077,#196085)); +#196068 = ORIENTED_EDGE('',*,*,#196047,.T.); +#196069 = ORIENTED_EDGE('',*,*,#196070,.T.); +#196070 = EDGE_CURVE('',#196040,#196071,#196073,.T.); +#196071 = VERTEX_POINT('',#196072); +#196072 = CARTESIAN_POINT('',(135.5,-119.957107,1.545)); +#196073 = LINE('',#196074,#196075); +#196074 = CARTESIAN_POINT('',(135.207107,-120.25,1.545)); +#196075 = VECTOR('',#196076,1.); +#196076 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#196077 = ORIENTED_EDGE('',*,*,#196078,.F.); +#196078 = EDGE_CURVE('',#196079,#196071,#196081,.T.); +#196079 = VERTEX_POINT('',#196080); +#196080 = CARTESIAN_POINT('',(135.5,-119.957107,1.51)); +#196081 = LINE('',#196082,#196083); +#196082 = CARTESIAN_POINT('',(135.5,-119.957107,1.51)); +#196083 = VECTOR('',#196084,1.); +#196084 = DIRECTION('',(0.,0.,1.)); +#196085 = ORIENTED_EDGE('',*,*,#196086,.F.); +#196086 = EDGE_CURVE('',#196048,#196079,#196087,.T.); +#196087 = LINE('',#196088,#196089); +#196088 = CARTESIAN_POINT('',(135.207107,-120.25,1.51)); +#196089 = VECTOR('',#196090,1.); +#196090 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#196091 = PLANE('',#196092); +#196092 = AXIS2_PLACEMENT_3D('',#196093,#196094,#196095); +#196093 = CARTESIAN_POINT('',(135.207107,-120.25,1.51)); +#196094 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196095 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#196096 = ADVANCED_FACE('',(#196097),#196122,.T.); +#196097 = FACE_BOUND('',#196098,.T.); +#196098 = EDGE_LOOP('',(#196099,#196100,#196108,#196116)); +#196099 = ORIENTED_EDGE('',*,*,#196078,.T.); +#196100 = ORIENTED_EDGE('',*,*,#196101,.T.); +#196101 = EDGE_CURVE('',#196071,#196102,#196104,.T.); +#196102 = VERTEX_POINT('',#196103); +#196103 = CARTESIAN_POINT('',(135.5,-119.542893,1.545)); +#196104 = LINE('',#196105,#196106); +#196105 = CARTESIAN_POINT('',(135.5,-119.957107,1.545)); +#196106 = VECTOR('',#196107,1.); +#196107 = DIRECTION('',(0.,1.,0.)); +#196108 = ORIENTED_EDGE('',*,*,#196109,.F.); +#196109 = EDGE_CURVE('',#196110,#196102,#196112,.T.); +#196110 = VERTEX_POINT('',#196111); +#196111 = CARTESIAN_POINT('',(135.5,-119.542893,1.51)); +#196112 = LINE('',#196113,#196114); +#196113 = CARTESIAN_POINT('',(135.5,-119.542893,1.51)); +#196114 = VECTOR('',#196115,1.); +#196115 = DIRECTION('',(0.,0.,1.)); +#196116 = ORIENTED_EDGE('',*,*,#196117,.F.); +#196117 = EDGE_CURVE('',#196079,#196110,#196118,.T.); +#196118 = LINE('',#196119,#196120); +#196119 = CARTESIAN_POINT('',(135.5,-119.957107,1.51)); +#196120 = VECTOR('',#196121,1.); +#196121 = DIRECTION('',(0.,1.,0.)); +#196122 = PLANE('',#196123); +#196123 = AXIS2_PLACEMENT_3D('',#196124,#196125,#196126); +#196124 = CARTESIAN_POINT('',(135.5,-119.957107,1.51)); +#196125 = DIRECTION('',(-1.,0.,0.)); +#196126 = DIRECTION('',(0.,1.,0.)); +#196127 = ADVANCED_FACE('',(#196128),#196153,.T.); +#196128 = FACE_BOUND('',#196129,.T.); +#196129 = EDGE_LOOP('',(#196130,#196131,#196139,#196147)); +#196130 = ORIENTED_EDGE('',*,*,#196109,.T.); +#196131 = ORIENTED_EDGE('',*,*,#196132,.T.); +#196132 = EDGE_CURVE('',#196102,#196133,#196135,.T.); +#196133 = VERTEX_POINT('',#196134); +#196134 = CARTESIAN_POINT('',(135.207107,-119.25,1.545)); +#196135 = LINE('',#196136,#196137); +#196136 = CARTESIAN_POINT('',(135.5,-119.542893,1.545)); +#196137 = VECTOR('',#196138,1.); +#196138 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196139 = ORIENTED_EDGE('',*,*,#196140,.F.); +#196140 = EDGE_CURVE('',#196141,#196133,#196143,.T.); +#196141 = VERTEX_POINT('',#196142); +#196142 = CARTESIAN_POINT('',(135.207107,-119.25,1.51)); +#196143 = LINE('',#196144,#196145); +#196144 = CARTESIAN_POINT('',(135.207107,-119.25,1.51)); +#196145 = VECTOR('',#196146,1.); +#196146 = DIRECTION('',(0.,0.,1.)); +#196147 = ORIENTED_EDGE('',*,*,#196148,.F.); +#196148 = EDGE_CURVE('',#196110,#196141,#196149,.T.); +#196149 = LINE('',#196150,#196151); +#196150 = CARTESIAN_POINT('',(135.5,-119.542893,1.51)); +#196151 = VECTOR('',#196152,1.); +#196152 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196153 = PLANE('',#196154); +#196154 = AXIS2_PLACEMENT_3D('',#196155,#196156,#196157); +#196155 = CARTESIAN_POINT('',(135.5,-119.542893,1.51)); +#196156 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#196157 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196158 = ADVANCED_FACE('',(#196159),#196184,.T.); +#196159 = FACE_BOUND('',#196160,.T.); +#196160 = EDGE_LOOP('',(#196161,#196162,#196170,#196178)); +#196161 = ORIENTED_EDGE('',*,*,#196140,.T.); +#196162 = ORIENTED_EDGE('',*,*,#196163,.T.); +#196163 = EDGE_CURVE('',#196133,#196164,#196166,.T.); +#196164 = VERTEX_POINT('',#196165); +#196165 = CARTESIAN_POINT('',(134.980491,-119.248079,1.545)); +#196166 = LINE('',#196167,#196168); +#196167 = CARTESIAN_POINT('',(135.207107,-119.25,1.545)); +#196168 = VECTOR('',#196169,1.); +#196169 = DIRECTION('',(-0.999964073063,8.476590286432E-03,0.)); +#196170 = ORIENTED_EDGE('',*,*,#196171,.F.); +#196171 = EDGE_CURVE('',#196172,#196164,#196174,.T.); +#196172 = VERTEX_POINT('',#196173); +#196173 = CARTESIAN_POINT('',(134.980491,-119.248079,1.51)); +#196174 = LINE('',#196175,#196176); +#196175 = CARTESIAN_POINT('',(134.980491,-119.248079,1.51)); +#196176 = VECTOR('',#196177,1.); +#196177 = DIRECTION('',(0.,0.,1.)); +#196178 = ORIENTED_EDGE('',*,*,#196179,.F.); +#196179 = EDGE_CURVE('',#196141,#196172,#196180,.T.); +#196180 = LINE('',#196181,#196182); +#196181 = CARTESIAN_POINT('',(135.207107,-119.25,1.51)); +#196182 = VECTOR('',#196183,1.); +#196183 = DIRECTION('',(-0.999964073063,8.476590286432E-03,0.)); +#196184 = PLANE('',#196185); +#196185 = AXIS2_PLACEMENT_3D('',#196186,#196187,#196188); +#196186 = CARTESIAN_POINT('',(135.207107,-119.25,1.51)); +#196187 = DIRECTION('',(-8.476590286432E-03,-0.999964073063,0.)); +#196188 = DIRECTION('',(-0.999964073063,8.476590286432E-03,0.)); +#196189 = ADVANCED_FACE('',(#196190),#196217,.T.); +#196190 = FACE_BOUND('',#196191,.T.); +#196191 = EDGE_LOOP('',(#196192,#196193,#196202,#196210)); +#196192 = ORIENTED_EDGE('',*,*,#196171,.T.); +#196193 = ORIENTED_EDGE('',*,*,#196194,.T.); +#196194 = EDGE_CURVE('',#196164,#196195,#196197,.T.); +#196195 = VERTEX_POINT('',#196196); +#196196 = CARTESIAN_POINT('',(134.901921,-119.169509,1.545)); +#196197 = CIRCLE('',#196198,0.100002891901); +#196198 = AXIS2_PLACEMENT_3D('',#196199,#196200,#196201); +#196199 = CARTESIAN_POINT('',(135.00000207103,-119.1499979289,1.545)); +#196200 = DIRECTION('',(0.,0.,-1.)); +#196201 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#196202 = ORIENTED_EDGE('',*,*,#196203,.F.); +#196203 = EDGE_CURVE('',#196204,#196195,#196206,.T.); +#196204 = VERTEX_POINT('',#196205); +#196205 = CARTESIAN_POINT('',(134.901921,-119.169509,1.51)); +#196206 = LINE('',#196207,#196208); +#196207 = CARTESIAN_POINT('',(134.901921,-119.169509,1.51)); +#196208 = VECTOR('',#196209,1.); +#196209 = DIRECTION('',(0.,0.,1.)); +#196210 = ORIENTED_EDGE('',*,*,#196211,.F.); +#196211 = EDGE_CURVE('',#196172,#196204,#196212,.T.); +#196212 = CIRCLE('',#196213,0.100002891901); +#196213 = AXIS2_PLACEMENT_3D('',#196214,#196215,#196216); +#196214 = CARTESIAN_POINT('',(135.00000207103,-119.1499979289,1.51)); +#196215 = DIRECTION('',(0.,0.,-1.)); +#196216 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#196217 = CYLINDRICAL_SURFACE('',#196218,0.100002891901); +#196218 = AXIS2_PLACEMENT_3D('',#196219,#196220,#196221); +#196219 = CARTESIAN_POINT('',(135.00000207103,-119.1499979289,1.51)); +#196220 = DIRECTION('',(0.,0.,-1.)); +#196221 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#196222 = ADVANCED_FACE('',(#196223),#196248,.T.); +#196223 = FACE_BOUND('',#196224,.T.); +#196224 = EDGE_LOOP('',(#196225,#196226,#196234,#196242)); +#196225 = ORIENTED_EDGE('',*,*,#196203,.T.); +#196226 = ORIENTED_EDGE('',*,*,#196227,.T.); +#196227 = EDGE_CURVE('',#196195,#196228,#196230,.T.); +#196228 = VERTEX_POINT('',#196229); +#196229 = CARTESIAN_POINT('',(134.9,-117.350456,1.545)); +#196230 = LINE('',#196231,#196232); +#196231 = CARTESIAN_POINT('',(134.901921,-119.169509,1.545)); +#196232 = VECTOR('',#196233,1.); +#196233 = DIRECTION('',(-1.056043407644E-03,0.999999442386,0.)); +#196234 = ORIENTED_EDGE('',*,*,#196235,.F.); +#196235 = EDGE_CURVE('',#196236,#196228,#196238,.T.); +#196236 = VERTEX_POINT('',#196237); +#196237 = CARTESIAN_POINT('',(134.9,-117.350456,1.51)); +#196238 = LINE('',#196239,#196240); +#196239 = CARTESIAN_POINT('',(134.9,-117.350456,1.51)); +#196240 = VECTOR('',#196241,1.); +#196241 = DIRECTION('',(0.,0.,1.)); +#196242 = ORIENTED_EDGE('',*,*,#196243,.F.); +#196243 = EDGE_CURVE('',#196204,#196236,#196244,.T.); +#196244 = LINE('',#196245,#196246); +#196245 = CARTESIAN_POINT('',(134.901921,-119.169509,1.51)); +#196246 = VECTOR('',#196247,1.); +#196247 = DIRECTION('',(-1.056043407644E-03,0.999999442386,0.)); +#196248 = PLANE('',#196249); +#196249 = AXIS2_PLACEMENT_3D('',#196250,#196251,#196252); +#196250 = CARTESIAN_POINT('',(134.901921,-119.169509,1.51)); +#196251 = DIRECTION('',(-0.999999442386,-1.056043407644E-03,0.)); +#196252 = DIRECTION('',(-1.056043407644E-03,0.999999442386,0.)); +#196253 = ADVANCED_FACE('',(#196254),#196279,.T.); +#196254 = FACE_BOUND('',#196255,.T.); +#196255 = EDGE_LOOP('',(#196256,#196257,#196265,#196273)); +#196256 = ORIENTED_EDGE('',*,*,#196235,.T.); +#196257 = ORIENTED_EDGE('',*,*,#196258,.T.); +#196258 = EDGE_CURVE('',#196228,#196259,#196261,.T.); +#196259 = VERTEX_POINT('',#196260); +#196260 = CARTESIAN_POINT('',(134.049544,-116.5,1.545)); +#196261 = LINE('',#196262,#196263); +#196262 = CARTESIAN_POINT('',(134.9,-117.350456,1.545)); +#196263 = VECTOR('',#196264,1.); +#196264 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196265 = ORIENTED_EDGE('',*,*,#196266,.F.); +#196266 = EDGE_CURVE('',#196267,#196259,#196269,.T.); +#196267 = VERTEX_POINT('',#196268); +#196268 = CARTESIAN_POINT('',(134.049544,-116.5,1.51)); +#196269 = LINE('',#196270,#196271); +#196270 = CARTESIAN_POINT('',(134.049544,-116.5,1.51)); +#196271 = VECTOR('',#196272,1.); +#196272 = DIRECTION('',(0.,0.,1.)); +#196273 = ORIENTED_EDGE('',*,*,#196274,.F.); +#196274 = EDGE_CURVE('',#196236,#196267,#196275,.T.); +#196275 = LINE('',#196276,#196277); +#196276 = CARTESIAN_POINT('',(134.9,-117.350456,1.51)); +#196277 = VECTOR('',#196278,1.); +#196278 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196279 = PLANE('',#196280); +#196280 = AXIS2_PLACEMENT_3D('',#196281,#196282,#196283); +#196281 = CARTESIAN_POINT('',(134.9,-117.350456,1.51)); +#196282 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#196283 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#196284 = ADVANCED_FACE('',(#196285),#196310,.T.); +#196285 = FACE_BOUND('',#196286,.T.); +#196286 = EDGE_LOOP('',(#196287,#196288,#196296,#196304)); +#196287 = ORIENTED_EDGE('',*,*,#196266,.T.); +#196288 = ORIENTED_EDGE('',*,*,#196289,.T.); +#196289 = EDGE_CURVE('',#196259,#196290,#196292,.T.); +#196290 = VERTEX_POINT('',#196291); +#196291 = CARTESIAN_POINT('',(133.781131,-116.5,1.545)); +#196292 = LINE('',#196293,#196294); +#196293 = CARTESIAN_POINT('',(134.049544,-116.5,1.545)); +#196294 = VECTOR('',#196295,1.); +#196295 = DIRECTION('',(-1.,0.,0.)); +#196296 = ORIENTED_EDGE('',*,*,#196297,.F.); +#196297 = EDGE_CURVE('',#196298,#196290,#196300,.T.); +#196298 = VERTEX_POINT('',#196299); +#196299 = CARTESIAN_POINT('',(133.781131,-116.5,1.51)); +#196300 = LINE('',#196301,#196302); +#196301 = CARTESIAN_POINT('',(133.781131,-116.5,1.51)); +#196302 = VECTOR('',#196303,1.); +#196303 = DIRECTION('',(0.,0.,1.)); +#196304 = ORIENTED_EDGE('',*,*,#196305,.F.); +#196305 = EDGE_CURVE('',#196267,#196298,#196306,.T.); +#196306 = LINE('',#196307,#196308); +#196307 = CARTESIAN_POINT('',(134.049544,-116.5,1.51)); +#196308 = VECTOR('',#196309,1.); +#196309 = DIRECTION('',(-1.,0.,0.)); +#196310 = PLANE('',#196311); +#196311 = AXIS2_PLACEMENT_3D('',#196312,#196313,#196314); +#196312 = CARTESIAN_POINT('',(134.049544,-116.5,1.51)); +#196313 = DIRECTION('',(0.,-1.,0.)); +#196314 = DIRECTION('',(-1.,0.,0.)); +#196315 = ADVANCED_FACE('',(#196316),#196341,.T.); +#196316 = FACE_BOUND('',#196317,.T.); +#196317 = EDGE_LOOP('',(#196318,#196319,#196327,#196335)); +#196318 = ORIENTED_EDGE('',*,*,#196297,.T.); +#196319 = ORIENTED_EDGE('',*,*,#196320,.T.); +#196320 = EDGE_CURVE('',#196290,#196321,#196323,.T.); +#196321 = VERTEX_POINT('',#196322); +#196322 = CARTESIAN_POINT('',(133.777164,-116.514805,1.545)); +#196323 = LINE('',#196324,#196325); +#196324 = CARTESIAN_POINT('',(133.781131,-116.5,1.545)); +#196325 = VECTOR('',#196326,1.); +#196326 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#196327 = ORIENTED_EDGE('',*,*,#196328,.F.); +#196328 = EDGE_CURVE('',#196329,#196321,#196331,.T.); +#196329 = VERTEX_POINT('',#196330); +#196330 = CARTESIAN_POINT('',(133.777164,-116.514805,1.51)); +#196331 = LINE('',#196332,#196333); +#196332 = CARTESIAN_POINT('',(133.777164,-116.514805,1.51)); +#196333 = VECTOR('',#196334,1.); +#196334 = DIRECTION('',(0.,0.,1.)); +#196335 = ORIENTED_EDGE('',*,*,#196336,.F.); +#196336 = EDGE_CURVE('',#196298,#196329,#196337,.T.); +#196337 = LINE('',#196338,#196339); +#196338 = CARTESIAN_POINT('',(133.781131,-116.5,1.51)); +#196339 = VECTOR('',#196340,1.); +#196340 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#196341 = PLANE('',#196342); +#196342 = AXIS2_PLACEMENT_3D('',#196343,#196344,#196345); +#196343 = CARTESIAN_POINT('',(133.781131,-116.5,1.51)); +#196344 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#196345 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#196346 = ADVANCED_FACE('',(#196347),#196374,.T.); +#196347 = FACE_BOUND('',#196348,.T.); +#196348 = EDGE_LOOP('',(#196349,#196350,#196359,#196367)); +#196349 = ORIENTED_EDGE('',*,*,#196328,.T.); +#196350 = ORIENTED_EDGE('',*,*,#196351,.T.); +#196351 = EDGE_CURVE('',#196321,#196352,#196354,.T.); +#196352 = VERTEX_POINT('',#196353); +#196353 = CARTESIAN_POINT('',(133.777164,-116.285195,1.545)); +#196354 = CIRCLE('',#196355,0.299999888633); +#196355 = AXIS2_PLACEMENT_3D('',#196356,#196357,#196358); +#196356 = CARTESIAN_POINT('',(133.50000024848,-116.4,1.545)); +#196357 = DIRECTION('',(-0.,0.,-1.)); +#196358 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#196359 = ORIENTED_EDGE('',*,*,#196360,.F.); +#196360 = EDGE_CURVE('',#196361,#196352,#196363,.T.); +#196361 = VERTEX_POINT('',#196362); +#196362 = CARTESIAN_POINT('',(133.777164,-116.285195,1.51)); +#196363 = LINE('',#196364,#196365); +#196364 = CARTESIAN_POINT('',(133.777164,-116.285195,1.51)); +#196365 = VECTOR('',#196366,1.); +#196366 = DIRECTION('',(0.,0.,1.)); +#196367 = ORIENTED_EDGE('',*,*,#196368,.F.); +#196368 = EDGE_CURVE('',#196329,#196361,#196369,.T.); +#196369 = CIRCLE('',#196370,0.299999888633); +#196370 = AXIS2_PLACEMENT_3D('',#196371,#196372,#196373); +#196371 = CARTESIAN_POINT('',(133.50000024848,-116.4,1.51)); +#196372 = DIRECTION('',(-0.,0.,-1.)); +#196373 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#196374 = CYLINDRICAL_SURFACE('',#196375,0.299999888633); +#196375 = AXIS2_PLACEMENT_3D('',#196376,#196377,#196378); +#196376 = CARTESIAN_POINT('',(133.50000024848,-116.4,1.51)); +#196377 = DIRECTION('',(-0.,0.,-1.)); +#196378 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#196379 = ADVANCED_FACE('',(#196380),#196396,.T.); +#196380 = FACE_BOUND('',#196381,.T.); +#196381 = EDGE_LOOP('',(#196382,#196383,#196389,#196390)); +#196382 = ORIENTED_EDGE('',*,*,#196360,.T.); +#196383 = ORIENTED_EDGE('',*,*,#196384,.T.); +#196384 = EDGE_CURVE('',#196352,#195377,#196385,.T.); +#196385 = LINE('',#196386,#196387); +#196386 = CARTESIAN_POINT('',(133.777164,-116.285195,1.545)); +#196387 = VECTOR('',#196388,1.); +#196388 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#196389 = ORIENTED_EDGE('',*,*,#195374,.F.); +#196390 = ORIENTED_EDGE('',*,*,#196391,.F.); +#196391 = EDGE_CURVE('',#196361,#195375,#196392,.T.); +#196392 = LINE('',#196393,#196394); +#196393 = CARTESIAN_POINT('',(133.777164,-116.285195,1.51)); +#196394 = VECTOR('',#196395,1.); +#196395 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#196396 = PLANE('',#196397); +#196397 = AXIS2_PLACEMENT_3D('',#196398,#196399,#196400); +#196398 = CARTESIAN_POINT('',(133.777164,-116.285195,1.51)); +#196399 = DIRECTION('',(0.965925627198,0.258819788118,-0.)); +#196400 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#196401 = ADVANCED_FACE('',(#196402),#196429,.F.); +#196402 = FACE_BOUND('',#196403,.T.); +#196403 = EDGE_LOOP('',(#196404,#196414,#196421,#196422)); +#196404 = ORIENTED_EDGE('',*,*,#196405,.T.); +#196405 = EDGE_CURVE('',#196406,#196408,#196410,.T.); +#196406 = VERTEX_POINT('',#196407); +#196407 = CARTESIAN_POINT('',(133.637255,-116.4,1.51)); +#196408 = VERTEX_POINT('',#196409); +#196409 = CARTESIAN_POINT('',(133.637255,-116.4,1.545)); +#196410 = LINE('',#196411,#196412); +#196411 = CARTESIAN_POINT('',(133.637255,-116.4,1.51)); +#196412 = VECTOR('',#196413,1.); +#196413 = DIRECTION('',(0.,0.,1.)); +#196414 = ORIENTED_EDGE('',*,*,#196415,.T.); +#196415 = EDGE_CURVE('',#196408,#196408,#196416,.T.); +#196416 = CIRCLE('',#196417,0.137255); +#196417 = AXIS2_PLACEMENT_3D('',#196418,#196419,#196420); +#196418 = CARTESIAN_POINT('',(133.5,-116.4,1.545)); +#196419 = DIRECTION('',(0.,0.,1.)); +#196420 = DIRECTION('',(1.,0.,-0.)); +#196421 = ORIENTED_EDGE('',*,*,#196405,.F.); +#196422 = ORIENTED_EDGE('',*,*,#196423,.F.); +#196423 = EDGE_CURVE('',#196406,#196406,#196424,.T.); +#196424 = CIRCLE('',#196425,0.137255); +#196425 = AXIS2_PLACEMENT_3D('',#196426,#196427,#196428); +#196426 = CARTESIAN_POINT('',(133.5,-116.4,1.51)); +#196427 = DIRECTION('',(0.,0.,1.)); +#196428 = DIRECTION('',(1.,0.,-0.)); +#196429 = CYLINDRICAL_SURFACE('',#196430,0.137255); +#196430 = AXIS2_PLACEMENT_3D('',#196431,#196432,#196433); +#196431 = CARTESIAN_POINT('',(133.5,-116.4,1.51)); +#196432 = DIRECTION('',(-0.,-0.,-1.)); +#196433 = DIRECTION('',(1.,0.,-0.)); +#196434 = ADVANCED_FACE('',(#196435,#196470),#196473,.F.); +#196435 = FACE_BOUND('',#196436,.T.); +#196436 = EDGE_LOOP('',(#196437,#196438,#196439,#196440,#196441,#196442, + #196443,#196444,#196445,#196446,#196447,#196448,#196449,#196450, + #196451,#196452,#196453,#196454,#196455,#196456,#196457,#196458, + #196459,#196460,#196461,#196462,#196463,#196464,#196465,#196466, + #196467,#196468,#196469)); +#196437 = ORIENTED_EDGE('',*,*,#195400,.T.); +#196438 = ORIENTED_EDGE('',*,*,#195431,.T.); +#196439 = ORIENTED_EDGE('',*,*,#195462,.T.); +#196440 = ORIENTED_EDGE('',*,*,#195493,.T.); +#196441 = ORIENTED_EDGE('',*,*,#195524,.T.); +#196442 = ORIENTED_EDGE('',*,*,#195555,.T.); +#196443 = ORIENTED_EDGE('',*,*,#195586,.T.); +#196444 = ORIENTED_EDGE('',*,*,#195617,.T.); +#196445 = ORIENTED_EDGE('',*,*,#195648,.T.); +#196446 = ORIENTED_EDGE('',*,*,#195679,.T.); +#196447 = ORIENTED_EDGE('',*,*,#195710,.T.); +#196448 = ORIENTED_EDGE('',*,*,#195741,.T.); +#196449 = ORIENTED_EDGE('',*,*,#195772,.T.); +#196450 = ORIENTED_EDGE('',*,*,#195803,.T.); +#196451 = ORIENTED_EDGE('',*,*,#195834,.T.); +#196452 = ORIENTED_EDGE('',*,*,#195865,.T.); +#196453 = ORIENTED_EDGE('',*,*,#195896,.T.); +#196454 = ORIENTED_EDGE('',*,*,#195928,.T.); +#196455 = ORIENTED_EDGE('',*,*,#195960,.T.); +#196456 = ORIENTED_EDGE('',*,*,#195991,.T.); +#196457 = ORIENTED_EDGE('',*,*,#196023,.T.); +#196458 = ORIENTED_EDGE('',*,*,#196055,.T.); +#196459 = ORIENTED_EDGE('',*,*,#196086,.T.); +#196460 = ORIENTED_EDGE('',*,*,#196117,.T.); +#196461 = ORIENTED_EDGE('',*,*,#196148,.T.); +#196462 = ORIENTED_EDGE('',*,*,#196179,.T.); +#196463 = ORIENTED_EDGE('',*,*,#196211,.T.); +#196464 = ORIENTED_EDGE('',*,*,#196243,.T.); +#196465 = ORIENTED_EDGE('',*,*,#196274,.T.); +#196466 = ORIENTED_EDGE('',*,*,#196305,.T.); +#196467 = ORIENTED_EDGE('',*,*,#196336,.T.); +#196468 = ORIENTED_EDGE('',*,*,#196368,.T.); +#196469 = ORIENTED_EDGE('',*,*,#196391,.T.); +#196470 = FACE_BOUND('',#196471,.T.); +#196471 = EDGE_LOOP('',(#196472)); +#196472 = ORIENTED_EDGE('',*,*,#196423,.T.); +#196473 = PLANE('',#196474); +#196474 = AXIS2_PLACEMENT_3D('',#196475,#196476,#196477); +#196475 = CARTESIAN_POINT('',(0.,0.,1.51)); +#196476 = DIRECTION('',(0.,0.,1.)); +#196477 = DIRECTION('',(1.,0.,-0.)); +#196478 = ADVANCED_FACE('',(#196479,#196514),#196517,.T.); +#196479 = FACE_BOUND('',#196480,.F.); +#196480 = EDGE_LOOP('',(#196481,#196482,#196483,#196484,#196485,#196486, + #196487,#196488,#196489,#196490,#196491,#196492,#196493,#196494, + #196495,#196496,#196497,#196498,#196499,#196500,#196501,#196502, + #196503,#196504,#196505,#196506,#196507,#196508,#196509,#196510, + #196511,#196512,#196513)); +#196481 = ORIENTED_EDGE('',*,*,#195384,.T.); +#196482 = ORIENTED_EDGE('',*,*,#195415,.T.); +#196483 = ORIENTED_EDGE('',*,*,#195446,.T.); +#196484 = ORIENTED_EDGE('',*,*,#195477,.T.); +#196485 = ORIENTED_EDGE('',*,*,#195508,.T.); +#196486 = ORIENTED_EDGE('',*,*,#195539,.T.); +#196487 = ORIENTED_EDGE('',*,*,#195570,.T.); +#196488 = ORIENTED_EDGE('',*,*,#195601,.T.); +#196489 = ORIENTED_EDGE('',*,*,#195632,.T.); +#196490 = ORIENTED_EDGE('',*,*,#195663,.T.); +#196491 = ORIENTED_EDGE('',*,*,#195694,.T.); +#196492 = ORIENTED_EDGE('',*,*,#195725,.T.); +#196493 = ORIENTED_EDGE('',*,*,#195756,.T.); +#196494 = ORIENTED_EDGE('',*,*,#195787,.T.); +#196495 = ORIENTED_EDGE('',*,*,#195818,.T.); +#196496 = ORIENTED_EDGE('',*,*,#195849,.T.); +#196497 = ORIENTED_EDGE('',*,*,#195880,.T.); +#196498 = ORIENTED_EDGE('',*,*,#195911,.T.); +#196499 = ORIENTED_EDGE('',*,*,#195944,.T.); +#196500 = ORIENTED_EDGE('',*,*,#195975,.T.); +#196501 = ORIENTED_EDGE('',*,*,#196006,.T.); +#196502 = ORIENTED_EDGE('',*,*,#196039,.T.); +#196503 = ORIENTED_EDGE('',*,*,#196070,.T.); +#196504 = ORIENTED_EDGE('',*,*,#196101,.T.); +#196505 = ORIENTED_EDGE('',*,*,#196132,.T.); +#196506 = ORIENTED_EDGE('',*,*,#196163,.T.); +#196507 = ORIENTED_EDGE('',*,*,#196194,.T.); +#196508 = ORIENTED_EDGE('',*,*,#196227,.T.); +#196509 = ORIENTED_EDGE('',*,*,#196258,.T.); +#196510 = ORIENTED_EDGE('',*,*,#196289,.T.); +#196511 = ORIENTED_EDGE('',*,*,#196320,.T.); +#196512 = ORIENTED_EDGE('',*,*,#196351,.T.); +#196513 = ORIENTED_EDGE('',*,*,#196384,.T.); +#196514 = FACE_BOUND('',#196515,.F.); +#196515 = EDGE_LOOP('',(#196516)); +#196516 = ORIENTED_EDGE('',*,*,#196415,.T.); +#196517 = PLANE('',#196518); +#196518 = AXIS2_PLACEMENT_3D('',#196519,#196520,#196521); +#196519 = CARTESIAN_POINT('',(0.,0.,1.545)); +#196520 = DIRECTION('',(0.,0.,1.)); +#196521 = DIRECTION('',(1.,0.,-0.)); +#196522 = MANIFOLD_SOLID_BREP('',#196523); +#196523 = CLOSED_SHELL('',(#196524,#196564,#196595,#196626,#196657, + #196688,#196719,#196750,#196781,#196812,#196843,#196874,#196905, + #196936,#196967,#196998,#197029,#197060,#197091,#197122,#197153, + #197184,#197215,#197246,#197279,#197310,#197341,#197372,#197403, + #197434,#197465,#197496,#197527,#197558,#197589,#197620,#197651, + #197682,#197713,#197744,#197775,#197806,#197837,#197868,#197899, + #197930,#197961,#197992,#198023,#198056,#198078,#198111,#198144, + #198208)); +#196524 = ADVANCED_FACE('',(#196525),#196559,.T.); +#196525 = FACE_BOUND('',#196526,.T.); +#196526 = EDGE_LOOP('',(#196527,#196537,#196545,#196553)); +#196527 = ORIENTED_EDGE('',*,*,#196528,.T.); +#196528 = EDGE_CURVE('',#196529,#196531,#196533,.T.); +#196529 = VERTEX_POINT('',#196530); +#196530 = CARTESIAN_POINT('',(143.87192,-87.2695,1.51)); +#196531 = VERTEX_POINT('',#196532); +#196532 = CARTESIAN_POINT('',(143.87192,-87.2695,1.545)); +#196533 = LINE('',#196534,#196535); +#196534 = CARTESIAN_POINT('',(143.87192,-87.2695,1.51)); +#196535 = VECTOR('',#196536,1.); +#196536 = DIRECTION('',(0.,0.,1.)); +#196537 = ORIENTED_EDGE('',*,*,#196538,.T.); +#196538 = EDGE_CURVE('',#196531,#196539,#196541,.T.); +#196539 = VERTEX_POINT('',#196540); +#196540 = CARTESIAN_POINT('',(142.6,-88.541421,1.545)); +#196541 = LINE('',#196542,#196543); +#196542 = CARTESIAN_POINT('',(143.87192,-87.2695,1.545)); +#196543 = VECTOR('',#196544,1.); +#196544 = DIRECTION('',(-0.707106503218,-0.707107059155,0.)); +#196545 = ORIENTED_EDGE('',*,*,#196546,.F.); +#196546 = EDGE_CURVE('',#196547,#196539,#196549,.T.); +#196547 = VERTEX_POINT('',#196548); +#196548 = CARTESIAN_POINT('',(142.6,-88.541421,1.51)); +#196549 = LINE('',#196550,#196551); +#196550 = CARTESIAN_POINT('',(142.6,-88.541421,1.51)); +#196551 = VECTOR('',#196552,1.); +#196552 = DIRECTION('',(0.,0.,1.)); +#196553 = ORIENTED_EDGE('',*,*,#196554,.F.); +#196554 = EDGE_CURVE('',#196529,#196547,#196555,.T.); +#196555 = LINE('',#196556,#196557); +#196556 = CARTESIAN_POINT('',(143.87192,-87.2695,1.51)); +#196557 = VECTOR('',#196558,1.); +#196558 = DIRECTION('',(-0.707106503218,-0.707107059155,0.)); +#196559 = PLANE('',#196560); +#196560 = AXIS2_PLACEMENT_3D('',#196561,#196562,#196563); +#196561 = CARTESIAN_POINT('',(143.87192,-87.2695,1.51)); +#196562 = DIRECTION('',(0.707107059155,-0.707106503218,0.)); +#196563 = DIRECTION('',(-0.707106503218,-0.707107059155,0.)); +#196564 = ADVANCED_FACE('',(#196565),#196590,.T.); +#196565 = FACE_BOUND('',#196566,.T.); +#196566 = EDGE_LOOP('',(#196567,#196568,#196576,#196584)); +#196567 = ORIENTED_EDGE('',*,*,#196546,.T.); +#196568 = ORIENTED_EDGE('',*,*,#196569,.T.); +#196569 = EDGE_CURVE('',#196539,#196570,#196572,.T.); +#196570 = VERTEX_POINT('',#196571); +#196571 = CARTESIAN_POINT('',(142.598079,-89.367122,1.545)); +#196572 = LINE('',#196573,#196574); +#196573 = CARTESIAN_POINT('',(142.6,-88.541421,1.545)); +#196574 = VECTOR('',#196575,1.); +#196575 = DIRECTION('',(-2.326501725397E-03,-0.999997293691,0.)); +#196576 = ORIENTED_EDGE('',*,*,#196577,.F.); +#196577 = EDGE_CURVE('',#196578,#196570,#196580,.T.); +#196578 = VERTEX_POINT('',#196579); +#196579 = CARTESIAN_POINT('',(142.598079,-89.367122,1.51)); +#196580 = LINE('',#196581,#196582); +#196581 = CARTESIAN_POINT('',(142.598079,-89.367122,1.51)); +#196582 = VECTOR('',#196583,1.); +#196583 = DIRECTION('',(0.,0.,1.)); +#196584 = ORIENTED_EDGE('',*,*,#196585,.F.); +#196585 = EDGE_CURVE('',#196547,#196578,#196586,.T.); +#196586 = LINE('',#196587,#196588); +#196587 = CARTESIAN_POINT('',(142.6,-88.541421,1.51)); +#196588 = VECTOR('',#196589,1.); +#196589 = DIRECTION('',(-2.326501725397E-03,-0.999997293691,0.)); +#196590 = PLANE('',#196591); +#196591 = AXIS2_PLACEMENT_3D('',#196592,#196593,#196594); +#196592 = CARTESIAN_POINT('',(142.6,-88.541421,1.51)); +#196593 = DIRECTION('',(0.999997293691,-2.326501725397E-03,0.)); +#196594 = DIRECTION('',(-2.326501725397E-03,-0.999997293691,0.)); +#196595 = ADVANCED_FACE('',(#196596),#196621,.T.); +#196596 = FACE_BOUND('',#196597,.T.); +#196597 = EDGE_LOOP('',(#196598,#196599,#196607,#196615)); +#196598 = ORIENTED_EDGE('',*,*,#196577,.T.); +#196599 = ORIENTED_EDGE('',*,*,#196600,.T.); +#196600 = EDGE_CURVE('',#196570,#196601,#196603,.T.); +#196601 = VERTEX_POINT('',#196602); +#196602 = CARTESIAN_POINT('',(142.583147,-89.403171,1.545)); +#196603 = LINE('',#196604,#196605); +#196604 = CARTESIAN_POINT('',(142.598079,-89.367122,1.545)); +#196605 = VECTOR('',#196606,1.); +#196606 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196607 = ORIENTED_EDGE('',*,*,#196608,.F.); +#196608 = EDGE_CURVE('',#196609,#196601,#196611,.T.); +#196609 = VERTEX_POINT('',#196610); +#196610 = CARTESIAN_POINT('',(142.583147,-89.403171,1.51)); +#196611 = LINE('',#196612,#196613); +#196612 = CARTESIAN_POINT('',(142.583147,-89.403171,1.51)); +#196613 = VECTOR('',#196614,1.); +#196614 = DIRECTION('',(0.,0.,1.)); +#196615 = ORIENTED_EDGE('',*,*,#196616,.F.); +#196616 = EDGE_CURVE('',#196578,#196609,#196617,.T.); +#196617 = LINE('',#196618,#196619); +#196618 = CARTESIAN_POINT('',(142.598079,-89.367122,1.51)); +#196619 = VECTOR('',#196620,1.); +#196620 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196621 = PLANE('',#196622); +#196622 = AXIS2_PLACEMENT_3D('',#196623,#196624,#196625); +#196623 = CARTESIAN_POINT('',(142.598079,-89.367122,1.51)); +#196624 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#196625 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196626 = ADVANCED_FACE('',(#196627),#196652,.T.); +#196627 = FACE_BOUND('',#196628,.T.); +#196628 = EDGE_LOOP('',(#196629,#196630,#196638,#196646)); +#196629 = ORIENTED_EDGE('',*,*,#196608,.T.); +#196630 = ORIENTED_EDGE('',*,*,#196631,.T.); +#196631 = EDGE_CURVE('',#196601,#196632,#196634,.T.); +#196632 = VERTEX_POINT('',#196633); +#196633 = CARTESIAN_POINT('',(142.35,-89.639034,1.545)); +#196634 = LINE('',#196635,#196636); +#196635 = CARTESIAN_POINT('',(142.583147,-89.403171,1.545)); +#196636 = VECTOR('',#196637,1.); +#196637 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196638 = ORIENTED_EDGE('',*,*,#196639,.F.); +#196639 = EDGE_CURVE('',#196640,#196632,#196642,.T.); +#196640 = VERTEX_POINT('',#196641); +#196641 = CARTESIAN_POINT('',(142.35,-89.639034,1.51)); +#196642 = LINE('',#196643,#196644); +#196643 = CARTESIAN_POINT('',(142.35,-89.639034,1.51)); +#196644 = VECTOR('',#196645,1.); +#196645 = DIRECTION('',(0.,0.,1.)); +#196646 = ORIENTED_EDGE('',*,*,#196647,.F.); +#196647 = EDGE_CURVE('',#196609,#196640,#196648,.T.); +#196648 = LINE('',#196649,#196650); +#196649 = CARTESIAN_POINT('',(142.583147,-89.403171,1.51)); +#196650 = VECTOR('',#196651,1.); +#196651 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196652 = PLANE('',#196653); +#196653 = AXIS2_PLACEMENT_3D('',#196654,#196655,#196656); +#196654 = CARTESIAN_POINT('',(142.583147,-89.403171,1.51)); +#196655 = DIRECTION('',(0.711189656218,-0.703000194088,0.)); +#196656 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196657 = ADVANCED_FACE('',(#196658),#196683,.T.); +#196658 = FACE_BOUND('',#196659,.T.); +#196659 = EDGE_LOOP('',(#196660,#196661,#196669,#196677)); +#196660 = ORIENTED_EDGE('',*,*,#196639,.T.); +#196661 = ORIENTED_EDGE('',*,*,#196662,.T.); +#196662 = EDGE_CURVE('',#196632,#196663,#196665,.T.); +#196663 = VERTEX_POINT('',#196664); +#196664 = CARTESIAN_POINT('',(142.35,-90.860965,1.545)); +#196665 = LINE('',#196666,#196667); +#196666 = CARTESIAN_POINT('',(142.35,-89.639034,1.545)); +#196667 = VECTOR('',#196668,1.); +#196668 = DIRECTION('',(0.,-1.,0.)); +#196669 = ORIENTED_EDGE('',*,*,#196670,.F.); +#196670 = EDGE_CURVE('',#196671,#196663,#196673,.T.); +#196671 = VERTEX_POINT('',#196672); +#196672 = CARTESIAN_POINT('',(142.35,-90.860965,1.51)); +#196673 = LINE('',#196674,#196675); +#196674 = CARTESIAN_POINT('',(142.35,-90.860965,1.51)); +#196675 = VECTOR('',#196676,1.); +#196676 = DIRECTION('',(0.,0.,1.)); +#196677 = ORIENTED_EDGE('',*,*,#196678,.F.); +#196678 = EDGE_CURVE('',#196640,#196671,#196679,.T.); +#196679 = LINE('',#196680,#196681); +#196680 = CARTESIAN_POINT('',(142.35,-89.639034,1.51)); +#196681 = VECTOR('',#196682,1.); +#196682 = DIRECTION('',(0.,-1.,0.)); +#196683 = PLANE('',#196684); +#196684 = AXIS2_PLACEMENT_3D('',#196685,#196686,#196687); +#196685 = CARTESIAN_POINT('',(142.35,-89.639034,1.51)); +#196686 = DIRECTION('',(1.,0.,-0.)); +#196687 = DIRECTION('',(0.,-1.,0.)); +#196688 = ADVANCED_FACE('',(#196689),#196714,.T.); +#196689 = FACE_BOUND('',#196690,.T.); +#196690 = EDGE_LOOP('',(#196691,#196692,#196700,#196708)); +#196691 = ORIENTED_EDGE('',*,*,#196670,.T.); +#196692 = ORIENTED_EDGE('',*,*,#196693,.T.); +#196693 = EDGE_CURVE('',#196663,#196694,#196696,.T.); +#196694 = VERTEX_POINT('',#196695); +#196695 = CARTESIAN_POINT('',(142.583147,-91.09683,1.545)); +#196696 = LINE('',#196697,#196698); +#196697 = CARTESIAN_POINT('',(142.35,-90.860965,1.545)); +#196698 = VECTOR('',#196699,1.); +#196699 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196700 = ORIENTED_EDGE('',*,*,#196701,.F.); +#196701 = EDGE_CURVE('',#196702,#196694,#196704,.T.); +#196702 = VERTEX_POINT('',#196703); +#196703 = CARTESIAN_POINT('',(142.583147,-91.09683,1.51)); +#196704 = LINE('',#196705,#196706); +#196705 = CARTESIAN_POINT('',(142.583147,-91.09683,1.51)); +#196706 = VECTOR('',#196707,1.); +#196707 = DIRECTION('',(0.,0.,1.)); +#196708 = ORIENTED_EDGE('',*,*,#196709,.F.); +#196709 = EDGE_CURVE('',#196671,#196702,#196710,.T.); +#196710 = LINE('',#196711,#196712); +#196711 = CARTESIAN_POINT('',(142.35,-90.860965,1.51)); +#196712 = VECTOR('',#196713,1.); +#196713 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196714 = PLANE('',#196715); +#196715 = AXIS2_PLACEMENT_3D('',#196716,#196717,#196718); +#196716 = CARTESIAN_POINT('',(142.35,-90.860965,1.51)); +#196717 = DIRECTION('',(0.711192636544,0.702997179031,-0.)); +#196718 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196719 = ADVANCED_FACE('',(#196720),#196745,.T.); +#196720 = FACE_BOUND('',#196721,.T.); +#196721 = EDGE_LOOP('',(#196722,#196723,#196731,#196739)); +#196722 = ORIENTED_EDGE('',*,*,#196701,.T.); +#196723 = ORIENTED_EDGE('',*,*,#196724,.T.); +#196724 = EDGE_CURVE('',#196694,#196725,#196727,.T.); +#196725 = VERTEX_POINT('',#196726); +#196726 = CARTESIAN_POINT('',(142.598079,-91.132878,1.545)); +#196727 = LINE('',#196728,#196729); +#196728 = CARTESIAN_POINT('',(142.583147,-91.09683,1.545)); +#196729 = VECTOR('',#196730,1.); +#196730 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196731 = ORIENTED_EDGE('',*,*,#196732,.F.); +#196732 = EDGE_CURVE('',#196733,#196725,#196735,.T.); +#196733 = VERTEX_POINT('',#196734); +#196734 = CARTESIAN_POINT('',(142.598079,-91.132878,1.51)); +#196735 = LINE('',#196736,#196737); +#196736 = CARTESIAN_POINT('',(142.598079,-91.132878,1.51)); +#196737 = VECTOR('',#196738,1.); +#196738 = DIRECTION('',(0.,0.,1.)); +#196739 = ORIENTED_EDGE('',*,*,#196740,.F.); +#196740 = EDGE_CURVE('',#196702,#196733,#196741,.T.); +#196741 = LINE('',#196742,#196743); +#196742 = CARTESIAN_POINT('',(142.583147,-91.09683,1.51)); +#196743 = VECTOR('',#196744,1.); +#196744 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196745 = PLANE('',#196746); +#196746 = AXIS2_PLACEMENT_3D('',#196747,#196748,#196749); +#196747 = CARTESIAN_POINT('',(142.583147,-91.09683,1.51)); +#196748 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#196749 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196750 = ADVANCED_FACE('',(#196751),#196776,.T.); +#196751 = FACE_BOUND('',#196752,.T.); +#196752 = EDGE_LOOP('',(#196753,#196754,#196762,#196770)); +#196753 = ORIENTED_EDGE('',*,*,#196732,.T.); +#196754 = ORIENTED_EDGE('',*,*,#196755,.T.); +#196755 = EDGE_CURVE('',#196725,#196756,#196758,.T.); +#196756 = VERTEX_POINT('',#196757); +#196757 = CARTESIAN_POINT('',(142.598079,-99.367122,1.545)); +#196758 = LINE('',#196759,#196760); +#196759 = CARTESIAN_POINT('',(142.598079,-91.132878,1.545)); +#196760 = VECTOR('',#196761,1.); +#196761 = DIRECTION('',(0.,-1.,0.)); +#196762 = ORIENTED_EDGE('',*,*,#196763,.F.); +#196763 = EDGE_CURVE('',#196764,#196756,#196766,.T.); +#196764 = VERTEX_POINT('',#196765); +#196765 = CARTESIAN_POINT('',(142.598079,-99.367122,1.51)); +#196766 = LINE('',#196767,#196768); +#196767 = CARTESIAN_POINT('',(142.598079,-99.367122,1.51)); +#196768 = VECTOR('',#196769,1.); +#196769 = DIRECTION('',(0.,0.,1.)); +#196770 = ORIENTED_EDGE('',*,*,#196771,.F.); +#196771 = EDGE_CURVE('',#196733,#196764,#196772,.T.); +#196772 = LINE('',#196773,#196774); +#196773 = CARTESIAN_POINT('',(142.598079,-91.132878,1.51)); +#196774 = VECTOR('',#196775,1.); +#196775 = DIRECTION('',(0.,-1.,0.)); +#196776 = PLANE('',#196777); +#196777 = AXIS2_PLACEMENT_3D('',#196778,#196779,#196780); +#196778 = CARTESIAN_POINT('',(142.598079,-91.132878,1.51)); +#196779 = DIRECTION('',(1.,0.,-0.)); +#196780 = DIRECTION('',(0.,-1.,0.)); +#196781 = ADVANCED_FACE('',(#196782),#196807,.T.); +#196782 = FACE_BOUND('',#196783,.T.); +#196783 = EDGE_LOOP('',(#196784,#196785,#196793,#196801)); +#196784 = ORIENTED_EDGE('',*,*,#196763,.T.); +#196785 = ORIENTED_EDGE('',*,*,#196786,.T.); +#196786 = EDGE_CURVE('',#196756,#196787,#196789,.T.); +#196787 = VERTEX_POINT('',#196788); +#196788 = CARTESIAN_POINT('',(142.583147,-99.403171,1.545)); +#196789 = LINE('',#196790,#196791); +#196790 = CARTESIAN_POINT('',(142.598079,-99.367122,1.545)); +#196791 = VECTOR('',#196792,1.); +#196792 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196793 = ORIENTED_EDGE('',*,*,#196794,.F.); +#196794 = EDGE_CURVE('',#196795,#196787,#196797,.T.); +#196795 = VERTEX_POINT('',#196796); +#196796 = CARTESIAN_POINT('',(142.583147,-99.403171,1.51)); +#196797 = LINE('',#196798,#196799); +#196798 = CARTESIAN_POINT('',(142.583147,-99.403171,1.51)); +#196799 = VECTOR('',#196800,1.); +#196800 = DIRECTION('',(0.,0.,1.)); +#196801 = ORIENTED_EDGE('',*,*,#196802,.F.); +#196802 = EDGE_CURVE('',#196764,#196795,#196803,.T.); +#196803 = LINE('',#196804,#196805); +#196804 = CARTESIAN_POINT('',(142.598079,-99.367122,1.51)); +#196805 = VECTOR('',#196806,1.); +#196806 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196807 = PLANE('',#196808); +#196808 = AXIS2_PLACEMENT_3D('',#196809,#196810,#196811); +#196809 = CARTESIAN_POINT('',(142.598079,-99.367122,1.51)); +#196810 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#196811 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#196812 = ADVANCED_FACE('',(#196813),#196838,.T.); +#196813 = FACE_BOUND('',#196814,.T.); +#196814 = EDGE_LOOP('',(#196815,#196816,#196824,#196832)); +#196815 = ORIENTED_EDGE('',*,*,#196794,.T.); +#196816 = ORIENTED_EDGE('',*,*,#196817,.T.); +#196817 = EDGE_CURVE('',#196787,#196818,#196820,.T.); +#196818 = VERTEX_POINT('',#196819); +#196819 = CARTESIAN_POINT('',(142.35,-99.639034,1.545)); +#196820 = LINE('',#196821,#196822); +#196821 = CARTESIAN_POINT('',(142.583147,-99.403171,1.545)); +#196822 = VECTOR('',#196823,1.); +#196823 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196824 = ORIENTED_EDGE('',*,*,#196825,.F.); +#196825 = EDGE_CURVE('',#196826,#196818,#196828,.T.); +#196826 = VERTEX_POINT('',#196827); +#196827 = CARTESIAN_POINT('',(142.35,-99.639034,1.51)); +#196828 = LINE('',#196829,#196830); +#196829 = CARTESIAN_POINT('',(142.35,-99.639034,1.51)); +#196830 = VECTOR('',#196831,1.); +#196831 = DIRECTION('',(0.,0.,1.)); +#196832 = ORIENTED_EDGE('',*,*,#196833,.F.); +#196833 = EDGE_CURVE('',#196795,#196826,#196834,.T.); +#196834 = LINE('',#196835,#196836); +#196835 = CARTESIAN_POINT('',(142.583147,-99.403171,1.51)); +#196836 = VECTOR('',#196837,1.); +#196837 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196838 = PLANE('',#196839); +#196839 = AXIS2_PLACEMENT_3D('',#196840,#196841,#196842); +#196840 = CARTESIAN_POINT('',(142.583147,-99.403171,1.51)); +#196841 = DIRECTION('',(0.711189656218,-0.703000194088,0.)); +#196842 = DIRECTION('',(-0.703000194088,-0.711189656218,0.)); +#196843 = ADVANCED_FACE('',(#196844),#196869,.T.); +#196844 = FACE_BOUND('',#196845,.T.); +#196845 = EDGE_LOOP('',(#196846,#196847,#196855,#196863)); +#196846 = ORIENTED_EDGE('',*,*,#196825,.T.); +#196847 = ORIENTED_EDGE('',*,*,#196848,.T.); +#196848 = EDGE_CURVE('',#196818,#196849,#196851,.T.); +#196849 = VERTEX_POINT('',#196850); +#196850 = CARTESIAN_POINT('',(142.35,-100.860965,1.545)); +#196851 = LINE('',#196852,#196853); +#196852 = CARTESIAN_POINT('',(142.35,-99.639034,1.545)); +#196853 = VECTOR('',#196854,1.); +#196854 = DIRECTION('',(0.,-1.,0.)); +#196855 = ORIENTED_EDGE('',*,*,#196856,.F.); +#196856 = EDGE_CURVE('',#196857,#196849,#196859,.T.); +#196857 = VERTEX_POINT('',#196858); +#196858 = CARTESIAN_POINT('',(142.35,-100.860965,1.51)); +#196859 = LINE('',#196860,#196861); +#196860 = CARTESIAN_POINT('',(142.35,-100.860965,1.51)); +#196861 = VECTOR('',#196862,1.); +#196862 = DIRECTION('',(0.,0.,1.)); +#196863 = ORIENTED_EDGE('',*,*,#196864,.F.); +#196864 = EDGE_CURVE('',#196826,#196857,#196865,.T.); +#196865 = LINE('',#196866,#196867); +#196866 = CARTESIAN_POINT('',(142.35,-99.639034,1.51)); +#196867 = VECTOR('',#196868,1.); +#196868 = DIRECTION('',(0.,-1.,0.)); +#196869 = PLANE('',#196870); +#196870 = AXIS2_PLACEMENT_3D('',#196871,#196872,#196873); +#196871 = CARTESIAN_POINT('',(142.35,-99.639034,1.51)); +#196872 = DIRECTION('',(1.,0.,-0.)); +#196873 = DIRECTION('',(0.,-1.,0.)); +#196874 = ADVANCED_FACE('',(#196875),#196900,.T.); +#196875 = FACE_BOUND('',#196876,.T.); +#196876 = EDGE_LOOP('',(#196877,#196878,#196886,#196894)); +#196877 = ORIENTED_EDGE('',*,*,#196856,.T.); +#196878 = ORIENTED_EDGE('',*,*,#196879,.T.); +#196879 = EDGE_CURVE('',#196849,#196880,#196882,.T.); +#196880 = VERTEX_POINT('',#196881); +#196881 = CARTESIAN_POINT('',(142.583147,-101.09683,1.545)); +#196882 = LINE('',#196883,#196884); +#196883 = CARTESIAN_POINT('',(142.35,-100.860965,1.545)); +#196884 = VECTOR('',#196885,1.); +#196885 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196886 = ORIENTED_EDGE('',*,*,#196887,.F.); +#196887 = EDGE_CURVE('',#196888,#196880,#196890,.T.); +#196888 = VERTEX_POINT('',#196889); +#196889 = CARTESIAN_POINT('',(142.583147,-101.09683,1.51)); +#196890 = LINE('',#196891,#196892); +#196891 = CARTESIAN_POINT('',(142.583147,-101.09683,1.51)); +#196892 = VECTOR('',#196893,1.); +#196893 = DIRECTION('',(0.,0.,1.)); +#196894 = ORIENTED_EDGE('',*,*,#196895,.F.); +#196895 = EDGE_CURVE('',#196857,#196888,#196896,.T.); +#196896 = LINE('',#196897,#196898); +#196897 = CARTESIAN_POINT('',(142.35,-100.860965,1.51)); +#196898 = VECTOR('',#196899,1.); +#196899 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196900 = PLANE('',#196901); +#196901 = AXIS2_PLACEMENT_3D('',#196902,#196903,#196904); +#196902 = CARTESIAN_POINT('',(142.35,-100.860965,1.51)); +#196903 = DIRECTION('',(0.711192636544,0.702997179031,-0.)); +#196904 = DIRECTION('',(0.702997179031,-0.711192636544,0.)); +#196905 = ADVANCED_FACE('',(#196906),#196931,.T.); +#196906 = FACE_BOUND('',#196907,.T.); +#196907 = EDGE_LOOP('',(#196908,#196909,#196917,#196925)); +#196908 = ORIENTED_EDGE('',*,*,#196887,.T.); +#196909 = ORIENTED_EDGE('',*,*,#196910,.T.); +#196910 = EDGE_CURVE('',#196880,#196911,#196913,.T.); +#196911 = VERTEX_POINT('',#196912); +#196912 = CARTESIAN_POINT('',(142.598079,-101.132878,1.545)); +#196913 = LINE('',#196914,#196915); +#196914 = CARTESIAN_POINT('',(142.583147,-101.09683,1.545)); +#196915 = VECTOR('',#196916,1.); +#196916 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196917 = ORIENTED_EDGE('',*,*,#196918,.F.); +#196918 = EDGE_CURVE('',#196919,#196911,#196921,.T.); +#196919 = VERTEX_POINT('',#196920); +#196920 = CARTESIAN_POINT('',(142.598079,-101.132878,1.51)); +#196921 = LINE('',#196922,#196923); +#196922 = CARTESIAN_POINT('',(142.598079,-101.132878,1.51)); +#196923 = VECTOR('',#196924,1.); +#196924 = DIRECTION('',(0.,0.,1.)); +#196925 = ORIENTED_EDGE('',*,*,#196926,.F.); +#196926 = EDGE_CURVE('',#196888,#196919,#196927,.T.); +#196927 = LINE('',#196928,#196929); +#196928 = CARTESIAN_POINT('',(142.583147,-101.09683,1.51)); +#196929 = VECTOR('',#196930,1.); +#196930 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196931 = PLANE('',#196932); +#196932 = AXIS2_PLACEMENT_3D('',#196933,#196934,#196935); +#196933 = CARTESIAN_POINT('',(142.583147,-101.09683,1.51)); +#196934 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#196935 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#196936 = ADVANCED_FACE('',(#196937),#196962,.T.); +#196937 = FACE_BOUND('',#196938,.T.); +#196938 = EDGE_LOOP('',(#196939,#196940,#196948,#196956)); +#196939 = ORIENTED_EDGE('',*,*,#196918,.T.); +#196940 = ORIENTED_EDGE('',*,*,#196941,.T.); +#196941 = EDGE_CURVE('',#196911,#196942,#196944,.T.); +#196942 = VERTEX_POINT('',#196943); +#196943 = CARTESIAN_POINT('',(142.6,-107.958578,1.545)); +#196944 = LINE('',#196945,#196946); +#196945 = CARTESIAN_POINT('',(142.598079,-101.132878,1.545)); +#196946 = VECTOR('',#196947,1.); +#196947 = DIRECTION('',(2.814363250515E-04,-0.999999960397,0.)); +#196948 = ORIENTED_EDGE('',*,*,#196949,.F.); +#196949 = EDGE_CURVE('',#196950,#196942,#196952,.T.); +#196950 = VERTEX_POINT('',#196951); +#196951 = CARTESIAN_POINT('',(142.6,-107.958578,1.51)); +#196952 = LINE('',#196953,#196954); +#196953 = CARTESIAN_POINT('',(142.6,-107.958578,1.51)); +#196954 = VECTOR('',#196955,1.); +#196955 = DIRECTION('',(0.,0.,1.)); +#196956 = ORIENTED_EDGE('',*,*,#196957,.F.); +#196957 = EDGE_CURVE('',#196919,#196950,#196958,.T.); +#196958 = LINE('',#196959,#196960); +#196959 = CARTESIAN_POINT('',(142.598079,-101.132878,1.51)); +#196960 = VECTOR('',#196961,1.); +#196961 = DIRECTION('',(2.814363250515E-04,-0.999999960397,0.)); +#196962 = PLANE('',#196963); +#196963 = AXIS2_PLACEMENT_3D('',#196964,#196965,#196966); +#196964 = CARTESIAN_POINT('',(142.598079,-101.132878,1.51)); +#196965 = DIRECTION('',(0.999999960397,2.814363250515E-04,-0.)); +#196966 = DIRECTION('',(2.814363250515E-04,-0.999999960397,0.)); +#196967 = ADVANCED_FACE('',(#196968),#196993,.T.); +#196968 = FACE_BOUND('',#196969,.T.); +#196969 = EDGE_LOOP('',(#196970,#196971,#196979,#196987)); +#196970 = ORIENTED_EDGE('',*,*,#196949,.T.); +#196971 = ORIENTED_EDGE('',*,*,#196972,.T.); +#196972 = EDGE_CURVE('',#196942,#196973,#196975,.T.); +#196973 = VERTEX_POINT('',#196974); +#196974 = CARTESIAN_POINT('',(143.083147,-108.444443,1.545)); +#196975 = LINE('',#196976,#196977); +#196976 = CARTESIAN_POINT('',(142.6,-107.958578,1.545)); +#196977 = VECTOR('',#196978,1.); +#196978 = DIRECTION('',(0.705120630278,-0.709087368916,0.)); +#196979 = ORIENTED_EDGE('',*,*,#196980,.F.); +#196980 = EDGE_CURVE('',#196981,#196973,#196983,.T.); +#196981 = VERTEX_POINT('',#196982); +#196982 = CARTESIAN_POINT('',(143.083147,-108.444443,1.51)); +#196983 = LINE('',#196984,#196985); +#196984 = CARTESIAN_POINT('',(143.083147,-108.444443,1.51)); +#196985 = VECTOR('',#196986,1.); +#196986 = DIRECTION('',(0.,0.,1.)); +#196987 = ORIENTED_EDGE('',*,*,#196988,.F.); +#196988 = EDGE_CURVE('',#196950,#196981,#196989,.T.); +#196989 = LINE('',#196990,#196991); +#196990 = CARTESIAN_POINT('',(142.6,-107.958578,1.51)); +#196991 = VECTOR('',#196992,1.); +#196992 = DIRECTION('',(0.705120630278,-0.709087368916,0.)); +#196993 = PLANE('',#196994); +#196994 = AXIS2_PLACEMENT_3D('',#196995,#196996,#196997); +#196995 = CARTESIAN_POINT('',(142.6,-107.958578,1.51)); +#196996 = DIRECTION('',(0.709087368916,0.705120630278,-0.)); +#196997 = DIRECTION('',(0.705120630278,-0.709087368916,0.)); +#196998 = ADVANCED_FACE('',(#196999),#197024,.T.); +#196999 = FACE_BOUND('',#197000,.T.); +#197000 = EDGE_LOOP('',(#197001,#197002,#197010,#197018)); +#197001 = ORIENTED_EDGE('',*,*,#196980,.T.); +#197002 = ORIENTED_EDGE('',*,*,#197003,.T.); +#197003 = EDGE_CURVE('',#196973,#197004,#197006,.T.); +#197004 = VERTEX_POINT('',#197005); +#197005 = CARTESIAN_POINT('',(143.098079,-108.480491,1.545)); +#197006 = LINE('',#197007,#197008); +#197007 = CARTESIAN_POINT('',(143.083147,-108.444443,1.545)); +#197008 = VECTOR('',#197009,1.); +#197009 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#197010 = ORIENTED_EDGE('',*,*,#197011,.F.); +#197011 = EDGE_CURVE('',#197012,#197004,#197014,.T.); +#197012 = VERTEX_POINT('',#197013); +#197013 = CARTESIAN_POINT('',(143.098079,-108.480491,1.51)); +#197014 = LINE('',#197015,#197016); +#197015 = CARTESIAN_POINT('',(143.098079,-108.480491,1.51)); +#197016 = VECTOR('',#197017,1.); +#197017 = DIRECTION('',(0.,0.,1.)); +#197018 = ORIENTED_EDGE('',*,*,#197019,.F.); +#197019 = EDGE_CURVE('',#196981,#197012,#197020,.T.); +#197020 = LINE('',#197021,#197022); +#197021 = CARTESIAN_POINT('',(143.083147,-108.444443,1.51)); +#197022 = VECTOR('',#197023,1.); +#197023 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#197024 = PLANE('',#197025); +#197025 = AXIS2_PLACEMENT_3D('',#197026,#197027,#197028); +#197026 = CARTESIAN_POINT('',(143.083147,-108.444443,1.51)); +#197027 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#197028 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#197029 = ADVANCED_FACE('',(#197030),#197055,.T.); +#197030 = FACE_BOUND('',#197031,.T.); +#197031 = EDGE_LOOP('',(#197032,#197033,#197041,#197049)); +#197032 = ORIENTED_EDGE('',*,*,#197011,.T.); +#197033 = ORIENTED_EDGE('',*,*,#197034,.T.); +#197034 = EDGE_CURVE('',#197004,#197035,#197037,.T.); +#197035 = VERTEX_POINT('',#197036); +#197036 = CARTESIAN_POINT('',(143.098079,-113.019509,1.545)); +#197037 = LINE('',#197038,#197039); +#197038 = CARTESIAN_POINT('',(143.098079,-108.480491,1.545)); +#197039 = VECTOR('',#197040,1.); +#197040 = DIRECTION('',(0.,-1.,0.)); +#197041 = ORIENTED_EDGE('',*,*,#197042,.F.); +#197042 = EDGE_CURVE('',#197043,#197035,#197045,.T.); +#197043 = VERTEX_POINT('',#197044); +#197044 = CARTESIAN_POINT('',(143.098079,-113.019509,1.51)); +#197045 = LINE('',#197046,#197047); +#197046 = CARTESIAN_POINT('',(143.098079,-113.019509,1.51)); +#197047 = VECTOR('',#197048,1.); +#197048 = DIRECTION('',(0.,0.,1.)); +#197049 = ORIENTED_EDGE('',*,*,#197050,.F.); +#197050 = EDGE_CURVE('',#197012,#197043,#197051,.T.); +#197051 = LINE('',#197052,#197053); +#197052 = CARTESIAN_POINT('',(143.098079,-108.480491,1.51)); +#197053 = VECTOR('',#197054,1.); +#197054 = DIRECTION('',(0.,-1.,0.)); +#197055 = PLANE('',#197056); +#197056 = AXIS2_PLACEMENT_3D('',#197057,#197058,#197059); +#197057 = CARTESIAN_POINT('',(143.098079,-108.480491,1.51)); +#197058 = DIRECTION('',(1.,0.,-0.)); +#197059 = DIRECTION('',(0.,-1.,0.)); +#197060 = ADVANCED_FACE('',(#197061),#197086,.T.); +#197061 = FACE_BOUND('',#197062,.T.); +#197062 = EDGE_LOOP('',(#197063,#197064,#197072,#197080)); +#197063 = ORIENTED_EDGE('',*,*,#197042,.T.); +#197064 = ORIENTED_EDGE('',*,*,#197065,.T.); +#197065 = EDGE_CURVE('',#197035,#197066,#197068,.T.); +#197066 = VERTEX_POINT('',#197067); +#197067 = CARTESIAN_POINT('',(143.083148,-113.055557,1.545)); +#197068 = LINE('',#197069,#197070); +#197069 = CARTESIAN_POINT('',(143.098079,-113.019509,1.545)); +#197070 = VECTOR('',#197071,1.); +#197071 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#197072 = ORIENTED_EDGE('',*,*,#197073,.F.); +#197073 = EDGE_CURVE('',#197074,#197066,#197076,.T.); +#197074 = VERTEX_POINT('',#197075); +#197075 = CARTESIAN_POINT('',(143.083148,-113.055557,1.51)); +#197076 = LINE('',#197077,#197078); +#197077 = CARTESIAN_POINT('',(143.083148,-113.055557,1.51)); +#197078 = VECTOR('',#197079,1.); +#197079 = DIRECTION('',(0.,0.,1.)); +#197080 = ORIENTED_EDGE('',*,*,#197081,.F.); +#197081 = EDGE_CURVE('',#197043,#197074,#197082,.T.); +#197082 = LINE('',#197083,#197084); +#197083 = CARTESIAN_POINT('',(143.098079,-113.019509,1.51)); +#197084 = VECTOR('',#197085,1.); +#197085 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#197086 = PLANE('',#197087); +#197087 = AXIS2_PLACEMENT_3D('',#197088,#197089,#197090); +#197088 = CARTESIAN_POINT('',(143.098079,-113.019509,1.51)); +#197089 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#197090 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#197091 = ADVANCED_FACE('',(#197092),#197117,.T.); +#197092 = FACE_BOUND('',#197093,.T.); +#197093 = EDGE_LOOP('',(#197094,#197095,#197103,#197111)); +#197094 = ORIENTED_EDGE('',*,*,#197073,.T.); +#197095 = ORIENTED_EDGE('',*,*,#197096,.T.); +#197096 = EDGE_CURVE('',#197066,#197097,#197099,.T.); +#197097 = VERTEX_POINT('',#197098); +#197098 = CARTESIAN_POINT('',(142.1,-114.041421,1.545)); +#197099 = LINE('',#197100,#197101); +#197100 = CARTESIAN_POINT('',(143.083148,-113.055557,1.545)); +#197101 = VECTOR('',#197102,1.); +#197102 = DIRECTION('',(-0.706130746133,-0.708081470853,0.)); +#197103 = ORIENTED_EDGE('',*,*,#197104,.F.); +#197104 = EDGE_CURVE('',#197105,#197097,#197107,.T.); +#197105 = VERTEX_POINT('',#197106); +#197106 = CARTESIAN_POINT('',(142.1,-114.041421,1.51)); +#197107 = LINE('',#197108,#197109); +#197108 = CARTESIAN_POINT('',(142.1,-114.041421,1.51)); +#197109 = VECTOR('',#197110,1.); +#197110 = DIRECTION('',(0.,0.,1.)); +#197111 = ORIENTED_EDGE('',*,*,#197112,.F.); +#197112 = EDGE_CURVE('',#197074,#197105,#197113,.T.); +#197113 = LINE('',#197114,#197115); +#197114 = CARTESIAN_POINT('',(143.083148,-113.055557,1.51)); +#197115 = VECTOR('',#197116,1.); +#197116 = DIRECTION('',(-0.706130746133,-0.708081470853,0.)); +#197117 = PLANE('',#197118); +#197118 = AXIS2_PLACEMENT_3D('',#197119,#197120,#197121); +#197119 = CARTESIAN_POINT('',(143.083148,-113.055557,1.51)); +#197120 = DIRECTION('',(0.708081470853,-0.706130746133,0.)); +#197121 = DIRECTION('',(-0.706130746133,-0.708081470853,0.)); +#197122 = ADVANCED_FACE('',(#197123),#197148,.T.); +#197123 = FACE_BOUND('',#197124,.T.); +#197124 = EDGE_LOOP('',(#197125,#197126,#197134,#197142)); +#197125 = ORIENTED_EDGE('',*,*,#197104,.T.); +#197126 = ORIENTED_EDGE('',*,*,#197127,.T.); +#197127 = EDGE_CURVE('',#197097,#197128,#197130,.T.); +#197128 = VERTEX_POINT('',#197129); +#197129 = CARTESIAN_POINT('',(142.098079,-114.643773,1.545)); +#197130 = LINE('',#197131,#197132); +#197131 = CARTESIAN_POINT('',(142.1,-114.041421,1.545)); +#197132 = VECTOR('',#197133,1.); +#197133 = DIRECTION('',(-3.189148921274E-03,-0.999994914652,0.)); +#197134 = ORIENTED_EDGE('',*,*,#197135,.F.); +#197135 = EDGE_CURVE('',#197136,#197128,#197138,.T.); +#197136 = VERTEX_POINT('',#197137); +#197137 = CARTESIAN_POINT('',(142.098079,-114.643773,1.51)); +#197138 = LINE('',#197139,#197140); +#197139 = CARTESIAN_POINT('',(142.098079,-114.643773,1.51)); +#197140 = VECTOR('',#197141,1.); +#197141 = DIRECTION('',(0.,0.,1.)); +#197142 = ORIENTED_EDGE('',*,*,#197143,.F.); +#197143 = EDGE_CURVE('',#197105,#197136,#197144,.T.); +#197144 = LINE('',#197145,#197146); +#197145 = CARTESIAN_POINT('',(142.1,-114.041421,1.51)); +#197146 = VECTOR('',#197147,1.); +#197147 = DIRECTION('',(-3.189148921274E-03,-0.999994914652,0.)); +#197148 = PLANE('',#197149); +#197149 = AXIS2_PLACEMENT_3D('',#197150,#197151,#197152); +#197150 = CARTESIAN_POINT('',(142.1,-114.041421,1.51)); +#197151 = DIRECTION('',(0.999994914652,-3.189148921274E-03,0.)); +#197152 = DIRECTION('',(-3.189148921274E-03,-0.999994914652,0.)); +#197153 = ADVANCED_FACE('',(#197154),#197179,.T.); +#197154 = FACE_BOUND('',#197155,.T.); +#197155 = EDGE_LOOP('',(#197156,#197157,#197165,#197173)); +#197156 = ORIENTED_EDGE('',*,*,#197135,.T.); +#197157 = ORIENTED_EDGE('',*,*,#197158,.T.); +#197158 = EDGE_CURVE('',#197128,#197159,#197161,.T.); +#197159 = VERTEX_POINT('',#197160); +#197160 = CARTESIAN_POINT('',(142.083147,-114.679821,1.545)); +#197161 = LINE('',#197162,#197163); +#197162 = CARTESIAN_POINT('',(142.098079,-114.643773,1.545)); +#197163 = VECTOR('',#197164,1.); +#197164 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#197165 = ORIENTED_EDGE('',*,*,#197166,.F.); +#197166 = EDGE_CURVE('',#197167,#197159,#197169,.T.); +#197167 = VERTEX_POINT('',#197168); +#197168 = CARTESIAN_POINT('',(142.083147,-114.679821,1.51)); +#197169 = LINE('',#197170,#197171); +#197170 = CARTESIAN_POINT('',(142.083147,-114.679821,1.51)); +#197171 = VECTOR('',#197172,1.); +#197172 = DIRECTION('',(0.,0.,1.)); +#197173 = ORIENTED_EDGE('',*,*,#197174,.F.); +#197174 = EDGE_CURVE('',#197136,#197167,#197175,.T.); +#197175 = LINE('',#197176,#197177); +#197176 = CARTESIAN_POINT('',(142.098079,-114.643773,1.51)); +#197177 = VECTOR('',#197178,1.); +#197178 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#197179 = PLANE('',#197180); +#197180 = AXIS2_PLACEMENT_3D('',#197181,#197182,#197183); +#197181 = CARTESIAN_POINT('',(142.098079,-114.643773,1.51)); +#197182 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#197183 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#197184 = ADVANCED_FACE('',(#197185),#197210,.T.); +#197185 = FACE_BOUND('',#197186,.T.); +#197186 = EDGE_LOOP('',(#197187,#197188,#197196,#197204)); +#197187 = ORIENTED_EDGE('',*,*,#197166,.T.); +#197188 = ORIENTED_EDGE('',*,*,#197189,.T.); +#197189 = EDGE_CURVE('',#197159,#197190,#197192,.T.); +#197190 = VERTEX_POINT('',#197191); +#197191 = CARTESIAN_POINT('',(141.640276,-115.125409,1.545)); +#197192 = LINE('',#197193,#197194); +#197193 = CARTESIAN_POINT('',(142.083147,-114.679821,1.545)); +#197194 = VECTOR('',#197195,1.); +#197195 = DIRECTION('',(-0.704941078831,-0.709265870726,0.)); +#197196 = ORIENTED_EDGE('',*,*,#197197,.F.); +#197197 = EDGE_CURVE('',#197198,#197190,#197200,.T.); +#197198 = VERTEX_POINT('',#197199); +#197199 = CARTESIAN_POINT('',(141.640276,-115.125409,1.51)); +#197200 = LINE('',#197201,#197202); +#197201 = CARTESIAN_POINT('',(141.640276,-115.125409,1.51)); +#197202 = VECTOR('',#197203,1.); +#197203 = DIRECTION('',(0.,0.,1.)); +#197204 = ORIENTED_EDGE('',*,*,#197205,.F.); +#197205 = EDGE_CURVE('',#197167,#197198,#197206,.T.); +#197206 = LINE('',#197207,#197208); +#197207 = CARTESIAN_POINT('',(142.083147,-114.679821,1.51)); +#197208 = VECTOR('',#197209,1.); +#197209 = DIRECTION('',(-0.704941078831,-0.709265870726,0.)); +#197210 = PLANE('',#197211); +#197211 = AXIS2_PLACEMENT_3D('',#197212,#197213,#197214); +#197212 = CARTESIAN_POINT('',(142.083147,-114.679821,1.51)); +#197213 = DIRECTION('',(0.709265870726,-0.704941078831,0.)); +#197214 = DIRECTION('',(-0.704941078831,-0.709265870726,0.)); +#197215 = ADVANCED_FACE('',(#197216),#197241,.T.); +#197216 = FACE_BOUND('',#197217,.T.); +#197217 = EDGE_LOOP('',(#197218,#197219,#197227,#197235)); +#197218 = ORIENTED_EDGE('',*,*,#197197,.T.); +#197219 = ORIENTED_EDGE('',*,*,#197220,.T.); +#197220 = EDGE_CURVE('',#197190,#197221,#197223,.T.); +#197221 = VERTEX_POINT('',#197222); +#197222 = CARTESIAN_POINT('',(141.682628,-115.149862,1.545)); +#197223 = LINE('',#197224,#197225); +#197224 = CARTESIAN_POINT('',(141.640276,-115.125409,1.545)); +#197225 = VECTOR('',#197226,1.); +#197226 = DIRECTION('',(0.866016005718,-0.500016277574,0.)); +#197227 = ORIENTED_EDGE('',*,*,#197228,.F.); +#197228 = EDGE_CURVE('',#197229,#197221,#197231,.T.); +#197229 = VERTEX_POINT('',#197230); +#197230 = CARTESIAN_POINT('',(141.682628,-115.149862,1.51)); +#197231 = LINE('',#197232,#197233); +#197232 = CARTESIAN_POINT('',(141.682628,-115.149862,1.51)); +#197233 = VECTOR('',#197234,1.); +#197234 = DIRECTION('',(0.,0.,1.)); +#197235 = ORIENTED_EDGE('',*,*,#197236,.F.); +#197236 = EDGE_CURVE('',#197198,#197229,#197237,.T.); +#197237 = LINE('',#197238,#197239); +#197238 = CARTESIAN_POINT('',(141.640276,-115.125409,1.51)); +#197239 = VECTOR('',#197240,1.); +#197240 = DIRECTION('',(0.866016005718,-0.500016277574,0.)); +#197241 = PLANE('',#197242); +#197242 = AXIS2_PLACEMENT_3D('',#197243,#197244,#197245); +#197243 = CARTESIAN_POINT('',(141.640276,-115.125409,1.51)); +#197244 = DIRECTION('',(0.500016277574,0.866016005718,-0.)); +#197245 = DIRECTION('',(0.866016005718,-0.500016277574,0.)); +#197246 = ADVANCED_FACE('',(#197247),#197274,.T.); +#197247 = FACE_BOUND('',#197248,.T.); +#197248 = EDGE_LOOP('',(#197249,#197250,#197259,#197267)); +#197249 = ORIENTED_EDGE('',*,*,#197228,.T.); +#197250 = ORIENTED_EDGE('',*,*,#197251,.T.); +#197251 = EDGE_CURVE('',#197221,#197252,#197254,.T.); +#197252 = VERTEX_POINT('',#197253); +#197253 = CARTESIAN_POINT('',(141.401921,-115.104755,1.545)); +#197254 = CIRCLE('',#197255,0.299893537616); +#197255 = AXIS2_PLACEMENT_3D('',#197256,#197257,#197258); +#197256 = CARTESIAN_POINT('',(141.50037975461,-115.3880252023,1.545)); +#197257 = DIRECTION('',(0.,0.,-1.)); +#197258 = DIRECTION('',(0.607709812074,0.79415916812,0.)); +#197259 = ORIENTED_EDGE('',*,*,#197260,.F.); +#197260 = EDGE_CURVE('',#197261,#197252,#197263,.T.); +#197261 = VERTEX_POINT('',#197262); +#197262 = CARTESIAN_POINT('',(141.401921,-115.104755,1.51)); +#197263 = LINE('',#197264,#197265); +#197264 = CARTESIAN_POINT('',(141.401921,-115.104755,1.51)); +#197265 = VECTOR('',#197266,1.); +#197266 = DIRECTION('',(0.,0.,1.)); +#197267 = ORIENTED_EDGE('',*,*,#197268,.F.); +#197268 = EDGE_CURVE('',#197229,#197261,#197269,.T.); +#197269 = CIRCLE('',#197270,0.299893537616); +#197270 = AXIS2_PLACEMENT_3D('',#197271,#197272,#197273); +#197271 = CARTESIAN_POINT('',(141.50037975461,-115.3880252023,1.51)); +#197272 = DIRECTION('',(0.,0.,-1.)); +#197273 = DIRECTION('',(0.607709812074,0.79415916812,0.)); +#197274 = CYLINDRICAL_SURFACE('',#197275,0.299893537616); +#197275 = AXIS2_PLACEMENT_3D('',#197276,#197277,#197278); +#197276 = CARTESIAN_POINT('',(141.50037975461,-115.3880252023,1.51)); +#197277 = DIRECTION('',(0.,0.,-1.)); +#197278 = DIRECTION('',(0.607709812074,0.79415916812,0.)); +#197279 = ADVANCED_FACE('',(#197280),#197305,.T.); +#197280 = FACE_BOUND('',#197281,.T.); +#197281 = EDGE_LOOP('',(#197282,#197283,#197291,#197299)); +#197282 = ORIENTED_EDGE('',*,*,#197260,.T.); +#197283 = ORIENTED_EDGE('',*,*,#197284,.T.); +#197284 = EDGE_CURVE('',#197252,#197285,#197287,.T.); +#197285 = VERTEX_POINT('',#197286); +#197286 = CARTESIAN_POINT('',(141.416853,-115.068707,1.545)); +#197287 = LINE('',#197288,#197289); +#197288 = CARTESIAN_POINT('',(141.401921,-115.104755,1.545)); +#197289 = VECTOR('',#197290,1.); +#197290 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197291 = ORIENTED_EDGE('',*,*,#197292,.F.); +#197292 = EDGE_CURVE('',#197293,#197285,#197295,.T.); +#197293 = VERTEX_POINT('',#197294); +#197294 = CARTESIAN_POINT('',(141.416853,-115.068707,1.51)); +#197295 = LINE('',#197296,#197297); +#197296 = CARTESIAN_POINT('',(141.416853,-115.068707,1.51)); +#197297 = VECTOR('',#197298,1.); +#197298 = DIRECTION('',(0.,0.,1.)); +#197299 = ORIENTED_EDGE('',*,*,#197300,.F.); +#197300 = EDGE_CURVE('',#197261,#197293,#197301,.T.); +#197301 = LINE('',#197302,#197303); +#197302 = CARTESIAN_POINT('',(141.401921,-115.104755,1.51)); +#197303 = VECTOR('',#197304,1.); +#197304 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197305 = PLANE('',#197306); +#197306 = AXIS2_PLACEMENT_3D('',#197307,#197308,#197309); +#197307 = CARTESIAN_POINT('',(141.401921,-115.104755,1.51)); +#197308 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#197309 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197310 = ADVANCED_FACE('',(#197311),#197336,.T.); +#197311 = FACE_BOUND('',#197312,.T.); +#197312 = EDGE_LOOP('',(#197313,#197314,#197322,#197330)); +#197313 = ORIENTED_EDGE('',*,*,#197292,.T.); +#197314 = ORIENTED_EDGE('',*,*,#197315,.T.); +#197315 = EDGE_CURVE('',#197285,#197316,#197318,.T.); +#197316 = VERTEX_POINT('',#197317); +#197317 = CARTESIAN_POINT('',(141.9,-114.582842,1.545)); +#197318 = LINE('',#197319,#197320); +#197319 = CARTESIAN_POINT('',(141.416853,-115.068707,1.545)); +#197320 = VECTOR('',#197321,1.); +#197321 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#197322 = ORIENTED_EDGE('',*,*,#197323,.F.); +#197323 = EDGE_CURVE('',#197324,#197316,#197326,.T.); +#197324 = VERTEX_POINT('',#197325); +#197325 = CARTESIAN_POINT('',(141.9,-114.582842,1.51)); +#197326 = LINE('',#197327,#197328); +#197327 = CARTESIAN_POINT('',(141.9,-114.582842,1.51)); +#197328 = VECTOR('',#197329,1.); +#197329 = DIRECTION('',(0.,0.,1.)); +#197330 = ORIENTED_EDGE('',*,*,#197331,.F.); +#197331 = EDGE_CURVE('',#197293,#197324,#197332,.T.); +#197332 = LINE('',#197333,#197334); +#197333 = CARTESIAN_POINT('',(141.416853,-115.068707,1.51)); +#197334 = VECTOR('',#197335,1.); +#197335 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#197336 = PLANE('',#197337); +#197337 = AXIS2_PLACEMENT_3D('',#197338,#197339,#197340); +#197338 = CARTESIAN_POINT('',(141.416853,-115.068707,1.51)); +#197339 = DIRECTION('',(-0.709087368916,0.705120630278,0.)); +#197340 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#197341 = ADVANCED_FACE('',(#197342),#197367,.T.); +#197342 = FACE_BOUND('',#197343,.T.); +#197343 = EDGE_LOOP('',(#197344,#197345,#197353,#197361)); +#197344 = ORIENTED_EDGE('',*,*,#197323,.T.); +#197345 = ORIENTED_EDGE('',*,*,#197346,.T.); +#197346 = EDGE_CURVE('',#197316,#197347,#197349,.T.); +#197347 = VERTEX_POINT('',#197348); +#197348 = CARTESIAN_POINT('',(141.901921,-113.980491,1.545)); +#197349 = LINE('',#197350,#197351); +#197350 = CARTESIAN_POINT('',(141.9,-114.582842,1.545)); +#197351 = VECTOR('',#197352,1.); +#197352 = DIRECTION('',(3.189154215723E-03,0.999994914635,0.)); +#197353 = ORIENTED_EDGE('',*,*,#197354,.F.); +#197354 = EDGE_CURVE('',#197355,#197347,#197357,.T.); +#197355 = VERTEX_POINT('',#197356); +#197356 = CARTESIAN_POINT('',(141.901921,-113.980491,1.51)); +#197357 = LINE('',#197358,#197359); +#197358 = CARTESIAN_POINT('',(141.901921,-113.980491,1.51)); +#197359 = VECTOR('',#197360,1.); +#197360 = DIRECTION('',(0.,0.,1.)); +#197361 = ORIENTED_EDGE('',*,*,#197362,.F.); +#197362 = EDGE_CURVE('',#197324,#197355,#197363,.T.); +#197363 = LINE('',#197364,#197365); +#197364 = CARTESIAN_POINT('',(141.9,-114.582842,1.51)); +#197365 = VECTOR('',#197366,1.); +#197366 = DIRECTION('',(3.189154215723E-03,0.999994914635,0.)); +#197367 = PLANE('',#197368); +#197368 = AXIS2_PLACEMENT_3D('',#197369,#197370,#197371); +#197369 = CARTESIAN_POINT('',(141.9,-114.582842,1.51)); +#197370 = DIRECTION('',(-0.999994914635,3.189154215723E-03,0.)); +#197371 = DIRECTION('',(3.189154215723E-03,0.999994914635,0.)); +#197372 = ADVANCED_FACE('',(#197373),#197398,.T.); +#197373 = FACE_BOUND('',#197374,.T.); +#197374 = EDGE_LOOP('',(#197375,#197376,#197384,#197392)); +#197375 = ORIENTED_EDGE('',*,*,#197354,.T.); +#197376 = ORIENTED_EDGE('',*,*,#197377,.T.); +#197377 = EDGE_CURVE('',#197347,#197378,#197380,.T.); +#197378 = VERTEX_POINT('',#197379); +#197379 = CARTESIAN_POINT('',(141.916853,-113.944443,1.545)); +#197380 = LINE('',#197381,#197382); +#197381 = CARTESIAN_POINT('',(141.901921,-113.980491,1.545)); +#197382 = VECTOR('',#197383,1.); +#197383 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197384 = ORIENTED_EDGE('',*,*,#197385,.F.); +#197385 = EDGE_CURVE('',#197386,#197378,#197388,.T.); +#197386 = VERTEX_POINT('',#197387); +#197387 = CARTESIAN_POINT('',(141.916853,-113.944443,1.51)); +#197388 = LINE('',#197389,#197390); +#197389 = CARTESIAN_POINT('',(141.916853,-113.944443,1.51)); +#197390 = VECTOR('',#197391,1.); +#197391 = DIRECTION('',(0.,0.,1.)); +#197392 = ORIENTED_EDGE('',*,*,#197393,.F.); +#197393 = EDGE_CURVE('',#197355,#197386,#197394,.T.); +#197394 = LINE('',#197395,#197396); +#197395 = CARTESIAN_POINT('',(141.901921,-113.980491,1.51)); +#197396 = VECTOR('',#197397,1.); +#197397 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197398 = PLANE('',#197399); +#197399 = AXIS2_PLACEMENT_3D('',#197400,#197401,#197402); +#197400 = CARTESIAN_POINT('',(141.901921,-113.980491,1.51)); +#197401 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#197402 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197403 = ADVANCED_FACE('',(#197404),#197429,.T.); +#197404 = FACE_BOUND('',#197405,.T.); +#197405 = EDGE_LOOP('',(#197406,#197407,#197415,#197423)); +#197406 = ORIENTED_EDGE('',*,*,#197385,.T.); +#197407 = ORIENTED_EDGE('',*,*,#197408,.T.); +#197408 = EDGE_CURVE('',#197378,#197409,#197411,.T.); +#197409 = VERTEX_POINT('',#197410); +#197410 = CARTESIAN_POINT('',(142.9,-112.958578,1.545)); +#197411 = LINE('',#197412,#197413); +#197412 = CARTESIAN_POINT('',(141.916853,-113.944443,1.545)); +#197413 = VECTOR('',#197414,1.); +#197414 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#197415 = ORIENTED_EDGE('',*,*,#197416,.F.); +#197416 = EDGE_CURVE('',#197417,#197409,#197419,.T.); +#197417 = VERTEX_POINT('',#197418); +#197418 = CARTESIAN_POINT('',(142.9,-112.958578,1.51)); +#197419 = LINE('',#197420,#197421); +#197420 = CARTESIAN_POINT('',(142.9,-112.958578,1.51)); +#197421 = VECTOR('',#197422,1.); +#197422 = DIRECTION('',(0.,0.,1.)); +#197423 = ORIENTED_EDGE('',*,*,#197424,.F.); +#197424 = EDGE_CURVE('',#197386,#197417,#197425,.T.); +#197425 = LINE('',#197426,#197427); +#197426 = CARTESIAN_POINT('',(141.916853,-113.944443,1.51)); +#197427 = VECTOR('',#197428,1.); +#197428 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#197429 = PLANE('',#197430); +#197430 = AXIS2_PLACEMENT_3D('',#197431,#197432,#197433); +#197431 = CARTESIAN_POINT('',(141.916853,-113.944443,1.51)); +#197432 = DIRECTION('',(-0.708082188095,0.706130026909,0.)); +#197433 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#197434 = ADVANCED_FACE('',(#197435),#197460,.T.); +#197435 = FACE_BOUND('',#197436,.T.); +#197436 = EDGE_LOOP('',(#197437,#197438,#197446,#197454)); +#197437 = ORIENTED_EDGE('',*,*,#197416,.T.); +#197438 = ORIENTED_EDGE('',*,*,#197439,.T.); +#197439 = EDGE_CURVE('',#197409,#197440,#197442,.T.); +#197440 = VERTEX_POINT('',#197441); +#197441 = CARTESIAN_POINT('',(142.9,-108.541422,1.545)); +#197442 = LINE('',#197443,#197444); +#197443 = CARTESIAN_POINT('',(142.9,-112.958578,1.545)); +#197444 = VECTOR('',#197445,1.); +#197445 = DIRECTION('',(0.,1.,0.)); +#197446 = ORIENTED_EDGE('',*,*,#197447,.F.); +#197447 = EDGE_CURVE('',#197448,#197440,#197450,.T.); +#197448 = VERTEX_POINT('',#197449); +#197449 = CARTESIAN_POINT('',(142.9,-108.541422,1.51)); +#197450 = LINE('',#197451,#197452); +#197451 = CARTESIAN_POINT('',(142.9,-108.541422,1.51)); +#197452 = VECTOR('',#197453,1.); +#197453 = DIRECTION('',(0.,0.,1.)); +#197454 = ORIENTED_EDGE('',*,*,#197455,.F.); +#197455 = EDGE_CURVE('',#197417,#197448,#197456,.T.); +#197456 = LINE('',#197457,#197458); +#197457 = CARTESIAN_POINT('',(142.9,-112.958578,1.51)); +#197458 = VECTOR('',#197459,1.); +#197459 = DIRECTION('',(0.,1.,0.)); +#197460 = PLANE('',#197461); +#197461 = AXIS2_PLACEMENT_3D('',#197462,#197463,#197464); +#197462 = CARTESIAN_POINT('',(142.9,-112.958578,1.51)); +#197463 = DIRECTION('',(-1.,0.,0.)); +#197464 = DIRECTION('',(0.,1.,0.)); +#197465 = ADVANCED_FACE('',(#197466),#197491,.T.); +#197466 = FACE_BOUND('',#197467,.T.); +#197467 = EDGE_LOOP('',(#197468,#197469,#197477,#197485)); +#197468 = ORIENTED_EDGE('',*,*,#197447,.T.); +#197469 = ORIENTED_EDGE('',*,*,#197470,.T.); +#197470 = EDGE_CURVE('',#197440,#197471,#197473,.T.); +#197471 = VERTEX_POINT('',#197472); +#197472 = CARTESIAN_POINT('',(142.416853,-108.055557,1.545)); +#197473 = LINE('',#197474,#197475); +#197474 = CARTESIAN_POINT('',(142.9,-108.541422,1.545)); +#197475 = VECTOR('',#197476,1.); +#197476 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#197477 = ORIENTED_EDGE('',*,*,#197478,.F.); +#197478 = EDGE_CURVE('',#197479,#197471,#197481,.T.); +#197479 = VERTEX_POINT('',#197480); +#197480 = CARTESIAN_POINT('',(142.416853,-108.055557,1.51)); +#197481 = LINE('',#197482,#197483); +#197482 = CARTESIAN_POINT('',(142.416853,-108.055557,1.51)); +#197483 = VECTOR('',#197484,1.); +#197484 = DIRECTION('',(0.,0.,1.)); +#197485 = ORIENTED_EDGE('',*,*,#197486,.F.); +#197486 = EDGE_CURVE('',#197448,#197479,#197487,.T.); +#197487 = LINE('',#197488,#197489); +#197488 = CARTESIAN_POINT('',(142.9,-108.541422,1.51)); +#197489 = VECTOR('',#197490,1.); +#197490 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#197491 = PLANE('',#197492); +#197492 = AXIS2_PLACEMENT_3D('',#197493,#197494,#197495); +#197493 = CARTESIAN_POINT('',(142.9,-108.541422,1.51)); +#197494 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#197495 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#197496 = ADVANCED_FACE('',(#197497),#197522,.T.); +#197497 = FACE_BOUND('',#197498,.T.); +#197498 = EDGE_LOOP('',(#197499,#197500,#197508,#197516)); +#197499 = ORIENTED_EDGE('',*,*,#197478,.T.); +#197500 = ORIENTED_EDGE('',*,*,#197501,.T.); +#197501 = EDGE_CURVE('',#197471,#197502,#197504,.T.); +#197502 = VERTEX_POINT('',#197503); +#197503 = CARTESIAN_POINT('',(142.401921,-108.019509,1.545)); +#197504 = LINE('',#197505,#197506); +#197505 = CARTESIAN_POINT('',(142.416853,-108.055557,1.545)); +#197506 = VECTOR('',#197507,1.); +#197507 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197508 = ORIENTED_EDGE('',*,*,#197509,.F.); +#197509 = EDGE_CURVE('',#197510,#197502,#197512,.T.); +#197510 = VERTEX_POINT('',#197511); +#197511 = CARTESIAN_POINT('',(142.401921,-108.019509,1.51)); +#197512 = LINE('',#197513,#197514); +#197513 = CARTESIAN_POINT('',(142.401921,-108.019509,1.51)); +#197514 = VECTOR('',#197515,1.); +#197515 = DIRECTION('',(0.,0.,1.)); +#197516 = ORIENTED_EDGE('',*,*,#197517,.F.); +#197517 = EDGE_CURVE('',#197479,#197510,#197518,.T.); +#197518 = LINE('',#197519,#197520); +#197519 = CARTESIAN_POINT('',(142.416853,-108.055557,1.51)); +#197520 = VECTOR('',#197521,1.); +#197521 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197522 = PLANE('',#197523); +#197523 = AXIS2_PLACEMENT_3D('',#197524,#197525,#197526); +#197524 = CARTESIAN_POINT('',(142.416853,-108.055557,1.51)); +#197525 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#197526 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197527 = ADVANCED_FACE('',(#197528),#197553,.T.); +#197528 = FACE_BOUND('',#197529,.T.); +#197529 = EDGE_LOOP('',(#197530,#197531,#197539,#197547)); +#197530 = ORIENTED_EDGE('',*,*,#197509,.T.); +#197531 = ORIENTED_EDGE('',*,*,#197532,.T.); +#197532 = EDGE_CURVE('',#197502,#197533,#197535,.T.); +#197533 = VERTEX_POINT('',#197534); +#197534 = CARTESIAN_POINT('',(142.4,-101.193808,1.545)); +#197535 = LINE('',#197536,#197537); +#197536 = CARTESIAN_POINT('',(142.401921,-108.019509,1.545)); +#197537 = VECTOR('',#197538,1.); +#197538 = DIRECTION('',(-2.814362838196E-04,0.999999960397,0.)); +#197539 = ORIENTED_EDGE('',*,*,#197540,.F.); +#197540 = EDGE_CURVE('',#197541,#197533,#197543,.T.); +#197541 = VERTEX_POINT('',#197542); +#197542 = CARTESIAN_POINT('',(142.4,-101.193808,1.51)); +#197543 = LINE('',#197544,#197545); +#197544 = CARTESIAN_POINT('',(142.4,-101.193808,1.51)); +#197545 = VECTOR('',#197546,1.); +#197546 = DIRECTION('',(0.,0.,1.)); +#197547 = ORIENTED_EDGE('',*,*,#197548,.F.); +#197548 = EDGE_CURVE('',#197510,#197541,#197549,.T.); +#197549 = LINE('',#197550,#197551); +#197550 = CARTESIAN_POINT('',(142.401921,-108.019509,1.51)); +#197551 = VECTOR('',#197552,1.); +#197552 = DIRECTION('',(-2.814362838196E-04,0.999999960397,0.)); +#197553 = PLANE('',#197554); +#197554 = AXIS2_PLACEMENT_3D('',#197555,#197556,#197557); +#197555 = CARTESIAN_POINT('',(142.401921,-108.019509,1.51)); +#197556 = DIRECTION('',(-0.999999960397,-2.814362838196E-04,0.)); +#197557 = DIRECTION('',(-2.814362838196E-04,0.999999960397,0.)); +#197558 = ADVANCED_FACE('',(#197559),#197584,.T.); +#197559 = FACE_BOUND('',#197560,.T.); +#197560 = EDGE_LOOP('',(#197561,#197562,#197570,#197578)); +#197561 = ORIENTED_EDGE('',*,*,#197540,.T.); +#197562 = ORIENTED_EDGE('',*,*,#197563,.T.); +#197563 = EDGE_CURVE('',#197533,#197564,#197566,.T.); +#197564 = VERTEX_POINT('',#197565); +#197565 = CARTESIAN_POINT('',(142.166853,-100.957944,1.545)); +#197566 = LINE('',#197567,#197568); +#197567 = CARTESIAN_POINT('',(142.4,-101.193808,1.545)); +#197568 = VECTOR('',#197569,1.); +#197569 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197570 = ORIENTED_EDGE('',*,*,#197571,.F.); +#197571 = EDGE_CURVE('',#197572,#197564,#197574,.T.); +#197572 = VERTEX_POINT('',#197573); +#197573 = CARTESIAN_POINT('',(142.166853,-100.957944,1.51)); +#197574 = LINE('',#197575,#197576); +#197575 = CARTESIAN_POINT('',(142.166853,-100.957944,1.51)); +#197576 = VECTOR('',#197577,1.); +#197577 = DIRECTION('',(0.,0.,1.)); +#197578 = ORIENTED_EDGE('',*,*,#197579,.F.); +#197579 = EDGE_CURVE('',#197541,#197572,#197580,.T.); +#197580 = LINE('',#197581,#197582); +#197581 = CARTESIAN_POINT('',(142.4,-101.193808,1.51)); +#197582 = VECTOR('',#197583,1.); +#197583 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197584 = PLANE('',#197585); +#197585 = AXIS2_PLACEMENT_3D('',#197586,#197587,#197588); +#197586 = CARTESIAN_POINT('',(142.4,-101.193808,1.51)); +#197587 = DIRECTION('',(-0.711191146386,-0.702998686558,0.)); +#197588 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197589 = ADVANCED_FACE('',(#197590),#197615,.T.); +#197590 = FACE_BOUND('',#197591,.T.); +#197591 = EDGE_LOOP('',(#197592,#197593,#197601,#197609)); +#197592 = ORIENTED_EDGE('',*,*,#197571,.T.); +#197593 = ORIENTED_EDGE('',*,*,#197594,.T.); +#197594 = EDGE_CURVE('',#197564,#197595,#197597,.T.); +#197595 = VERTEX_POINT('',#197596); +#197596 = CARTESIAN_POINT('',(142.151921,-100.921896,1.545)); +#197597 = LINE('',#197598,#197599); +#197598 = CARTESIAN_POINT('',(142.166853,-100.957944,1.545)); +#197599 = VECTOR('',#197600,1.); +#197600 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197601 = ORIENTED_EDGE('',*,*,#197602,.F.); +#197602 = EDGE_CURVE('',#197603,#197595,#197605,.T.); +#197603 = VERTEX_POINT('',#197604); +#197604 = CARTESIAN_POINT('',(142.151921,-100.921896,1.51)); +#197605 = LINE('',#197606,#197607); +#197606 = CARTESIAN_POINT('',(142.151921,-100.921896,1.51)); +#197607 = VECTOR('',#197608,1.); +#197608 = DIRECTION('',(0.,0.,1.)); +#197609 = ORIENTED_EDGE('',*,*,#197610,.F.); +#197610 = EDGE_CURVE('',#197572,#197603,#197611,.T.); +#197611 = LINE('',#197612,#197613); +#197612 = CARTESIAN_POINT('',(142.166853,-100.957944,1.51)); +#197613 = VECTOR('',#197614,1.); +#197614 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197615 = PLANE('',#197616); +#197616 = AXIS2_PLACEMENT_3D('',#197617,#197618,#197619); +#197617 = CARTESIAN_POINT('',(142.166853,-100.957944,1.51)); +#197618 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#197619 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197620 = ADVANCED_FACE('',(#197621),#197646,.T.); +#197621 = FACE_BOUND('',#197622,.T.); +#197622 = EDGE_LOOP('',(#197623,#197624,#197632,#197640)); +#197623 = ORIENTED_EDGE('',*,*,#197602,.T.); +#197624 = ORIENTED_EDGE('',*,*,#197625,.T.); +#197625 = EDGE_CURVE('',#197595,#197626,#197628,.T.); +#197626 = VERTEX_POINT('',#197627); +#197627 = CARTESIAN_POINT('',(142.151921,-99.578104,1.545)); +#197628 = LINE('',#197629,#197630); +#197629 = CARTESIAN_POINT('',(142.151921,-100.921896,1.545)); +#197630 = VECTOR('',#197631,1.); +#197631 = DIRECTION('',(0.,1.,0.)); +#197632 = ORIENTED_EDGE('',*,*,#197633,.F.); +#197633 = EDGE_CURVE('',#197634,#197626,#197636,.T.); +#197634 = VERTEX_POINT('',#197635); +#197635 = CARTESIAN_POINT('',(142.151921,-99.578104,1.51)); +#197636 = LINE('',#197637,#197638); +#197637 = CARTESIAN_POINT('',(142.151921,-99.578104,1.51)); +#197638 = VECTOR('',#197639,1.); +#197639 = DIRECTION('',(0.,0.,1.)); +#197640 = ORIENTED_EDGE('',*,*,#197641,.F.); +#197641 = EDGE_CURVE('',#197603,#197634,#197642,.T.); +#197642 = LINE('',#197643,#197644); +#197643 = CARTESIAN_POINT('',(142.151921,-100.921896,1.51)); +#197644 = VECTOR('',#197645,1.); +#197645 = DIRECTION('',(0.,1.,0.)); +#197646 = PLANE('',#197647); +#197647 = AXIS2_PLACEMENT_3D('',#197648,#197649,#197650); +#197648 = CARTESIAN_POINT('',(142.151921,-100.921896,1.51)); +#197649 = DIRECTION('',(-1.,0.,0.)); +#197650 = DIRECTION('',(0.,1.,0.)); +#197651 = ADVANCED_FACE('',(#197652),#197677,.T.); +#197652 = FACE_BOUND('',#197653,.T.); +#197653 = EDGE_LOOP('',(#197654,#197655,#197663,#197671)); +#197654 = ORIENTED_EDGE('',*,*,#197633,.T.); +#197655 = ORIENTED_EDGE('',*,*,#197656,.T.); +#197656 = EDGE_CURVE('',#197626,#197657,#197659,.T.); +#197657 = VERTEX_POINT('',#197658); +#197658 = CARTESIAN_POINT('',(142.166853,-99.542056,1.545)); +#197659 = LINE('',#197660,#197661); +#197660 = CARTESIAN_POINT('',(142.151921,-99.578104,1.545)); +#197661 = VECTOR('',#197662,1.); +#197662 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197663 = ORIENTED_EDGE('',*,*,#197664,.F.); +#197664 = EDGE_CURVE('',#197665,#197657,#197667,.T.); +#197665 = VERTEX_POINT('',#197666); +#197666 = CARTESIAN_POINT('',(142.166853,-99.542056,1.51)); +#197667 = LINE('',#197668,#197669); +#197668 = CARTESIAN_POINT('',(142.166853,-99.542056,1.51)); +#197669 = VECTOR('',#197670,1.); +#197670 = DIRECTION('',(0.,0.,1.)); +#197671 = ORIENTED_EDGE('',*,*,#197672,.F.); +#197672 = EDGE_CURVE('',#197634,#197665,#197673,.T.); +#197673 = LINE('',#197674,#197675); +#197674 = CARTESIAN_POINT('',(142.151921,-99.578104,1.51)); +#197675 = VECTOR('',#197676,1.); +#197676 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197677 = PLANE('',#197678); +#197678 = AXIS2_PLACEMENT_3D('',#197679,#197680,#197681); +#197679 = CARTESIAN_POINT('',(142.151921,-99.578104,1.51)); +#197680 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#197681 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197682 = ADVANCED_FACE('',(#197683),#197708,.T.); +#197683 = FACE_BOUND('',#197684,.T.); +#197684 = EDGE_LOOP('',(#197685,#197686,#197694,#197702)); +#197685 = ORIENTED_EDGE('',*,*,#197664,.T.); +#197686 = ORIENTED_EDGE('',*,*,#197687,.T.); +#197687 = EDGE_CURVE('',#197657,#197688,#197690,.T.); +#197688 = VERTEX_POINT('',#197689); +#197689 = CARTESIAN_POINT('',(142.4,-99.306191,1.545)); +#197690 = LINE('',#197691,#197692); +#197691 = CARTESIAN_POINT('',(142.166853,-99.542056,1.545)); +#197692 = VECTOR('',#197693,1.); +#197693 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197694 = ORIENTED_EDGE('',*,*,#197695,.F.); +#197695 = EDGE_CURVE('',#197696,#197688,#197698,.T.); +#197696 = VERTEX_POINT('',#197697); +#197697 = CARTESIAN_POINT('',(142.4,-99.306191,1.51)); +#197698 = LINE('',#197699,#197700); +#197699 = CARTESIAN_POINT('',(142.4,-99.306191,1.51)); +#197700 = VECTOR('',#197701,1.); +#197701 = DIRECTION('',(0.,0.,1.)); +#197702 = ORIENTED_EDGE('',*,*,#197703,.F.); +#197703 = EDGE_CURVE('',#197665,#197696,#197704,.T.); +#197704 = LINE('',#197705,#197706); +#197705 = CARTESIAN_POINT('',(142.166853,-99.542056,1.51)); +#197706 = VECTOR('',#197707,1.); +#197707 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197708 = PLANE('',#197709); +#197709 = AXIS2_PLACEMENT_3D('',#197710,#197711,#197712); +#197710 = CARTESIAN_POINT('',(142.166853,-99.542056,1.51)); +#197711 = DIRECTION('',(-0.711192636544,0.702997179031,0.)); +#197712 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197713 = ADVANCED_FACE('',(#197714),#197739,.T.); +#197714 = FACE_BOUND('',#197715,.T.); +#197715 = EDGE_LOOP('',(#197716,#197717,#197725,#197733)); +#197716 = ORIENTED_EDGE('',*,*,#197695,.T.); +#197717 = ORIENTED_EDGE('',*,*,#197718,.T.); +#197718 = EDGE_CURVE('',#197688,#197719,#197721,.T.); +#197719 = VERTEX_POINT('',#197720); +#197720 = CARTESIAN_POINT('',(142.4,-91.193808,1.545)); +#197721 = LINE('',#197722,#197723); +#197722 = CARTESIAN_POINT('',(142.4,-99.306191,1.545)); +#197723 = VECTOR('',#197724,1.); +#197724 = DIRECTION('',(0.,1.,0.)); +#197725 = ORIENTED_EDGE('',*,*,#197726,.F.); +#197726 = EDGE_CURVE('',#197727,#197719,#197729,.T.); +#197727 = VERTEX_POINT('',#197728); +#197728 = CARTESIAN_POINT('',(142.4,-91.193808,1.51)); +#197729 = LINE('',#197730,#197731); +#197730 = CARTESIAN_POINT('',(142.4,-91.193808,1.51)); +#197731 = VECTOR('',#197732,1.); +#197732 = DIRECTION('',(0.,0.,1.)); +#197733 = ORIENTED_EDGE('',*,*,#197734,.F.); +#197734 = EDGE_CURVE('',#197696,#197727,#197735,.T.); +#197735 = LINE('',#197736,#197737); +#197736 = CARTESIAN_POINT('',(142.4,-99.306191,1.51)); +#197737 = VECTOR('',#197738,1.); +#197738 = DIRECTION('',(0.,1.,0.)); +#197739 = PLANE('',#197740); +#197740 = AXIS2_PLACEMENT_3D('',#197741,#197742,#197743); +#197741 = CARTESIAN_POINT('',(142.4,-99.306191,1.51)); +#197742 = DIRECTION('',(-1.,0.,0.)); +#197743 = DIRECTION('',(0.,1.,0.)); +#197744 = ADVANCED_FACE('',(#197745),#197770,.T.); +#197745 = FACE_BOUND('',#197746,.T.); +#197746 = EDGE_LOOP('',(#197747,#197748,#197756,#197764)); +#197747 = ORIENTED_EDGE('',*,*,#197726,.T.); +#197748 = ORIENTED_EDGE('',*,*,#197749,.T.); +#197749 = EDGE_CURVE('',#197719,#197750,#197752,.T.); +#197750 = VERTEX_POINT('',#197751); +#197751 = CARTESIAN_POINT('',(142.166853,-90.957944,1.545)); +#197752 = LINE('',#197753,#197754); +#197753 = CARTESIAN_POINT('',(142.4,-91.193808,1.545)); +#197754 = VECTOR('',#197755,1.); +#197755 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197756 = ORIENTED_EDGE('',*,*,#197757,.F.); +#197757 = EDGE_CURVE('',#197758,#197750,#197760,.T.); +#197758 = VERTEX_POINT('',#197759); +#197759 = CARTESIAN_POINT('',(142.166853,-90.957944,1.51)); +#197760 = LINE('',#197761,#197762); +#197761 = CARTESIAN_POINT('',(142.166853,-90.957944,1.51)); +#197762 = VECTOR('',#197763,1.); +#197763 = DIRECTION('',(0.,0.,1.)); +#197764 = ORIENTED_EDGE('',*,*,#197765,.F.); +#197765 = EDGE_CURVE('',#197727,#197758,#197766,.T.); +#197766 = LINE('',#197767,#197768); +#197767 = CARTESIAN_POINT('',(142.4,-91.193808,1.51)); +#197768 = VECTOR('',#197769,1.); +#197769 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197770 = PLANE('',#197771); +#197771 = AXIS2_PLACEMENT_3D('',#197772,#197773,#197774); +#197772 = CARTESIAN_POINT('',(142.4,-91.193808,1.51)); +#197773 = DIRECTION('',(-0.711191146386,-0.702998686558,0.)); +#197774 = DIRECTION('',(-0.702998686558,0.711191146386,0.)); +#197775 = ADVANCED_FACE('',(#197776),#197801,.T.); +#197776 = FACE_BOUND('',#197777,.T.); +#197777 = EDGE_LOOP('',(#197778,#197779,#197787,#197795)); +#197778 = ORIENTED_EDGE('',*,*,#197757,.T.); +#197779 = ORIENTED_EDGE('',*,*,#197780,.T.); +#197780 = EDGE_CURVE('',#197750,#197781,#197783,.T.); +#197781 = VERTEX_POINT('',#197782); +#197782 = CARTESIAN_POINT('',(142.151921,-90.921896,1.545)); +#197783 = LINE('',#197784,#197785); +#197784 = CARTESIAN_POINT('',(142.166853,-90.957944,1.545)); +#197785 = VECTOR('',#197786,1.); +#197786 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197787 = ORIENTED_EDGE('',*,*,#197788,.F.); +#197788 = EDGE_CURVE('',#197789,#197781,#197791,.T.); +#197789 = VERTEX_POINT('',#197790); +#197790 = CARTESIAN_POINT('',(142.151921,-90.921896,1.51)); +#197791 = LINE('',#197792,#197793); +#197792 = CARTESIAN_POINT('',(142.151921,-90.921896,1.51)); +#197793 = VECTOR('',#197794,1.); +#197794 = DIRECTION('',(0.,0.,1.)); +#197795 = ORIENTED_EDGE('',*,*,#197796,.F.); +#197796 = EDGE_CURVE('',#197758,#197789,#197797,.T.); +#197797 = LINE('',#197798,#197799); +#197798 = CARTESIAN_POINT('',(142.166853,-90.957944,1.51)); +#197799 = VECTOR('',#197800,1.); +#197800 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197801 = PLANE('',#197802); +#197802 = AXIS2_PLACEMENT_3D('',#197803,#197804,#197805); +#197803 = CARTESIAN_POINT('',(142.166853,-90.957944,1.51)); +#197804 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#197805 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#197806 = ADVANCED_FACE('',(#197807),#197832,.T.); +#197807 = FACE_BOUND('',#197808,.T.); +#197808 = EDGE_LOOP('',(#197809,#197810,#197818,#197826)); +#197809 = ORIENTED_EDGE('',*,*,#197788,.T.); +#197810 = ORIENTED_EDGE('',*,*,#197811,.T.); +#197811 = EDGE_CURVE('',#197781,#197812,#197814,.T.); +#197812 = VERTEX_POINT('',#197813); +#197813 = CARTESIAN_POINT('',(142.151921,-89.578104,1.545)); +#197814 = LINE('',#197815,#197816); +#197815 = CARTESIAN_POINT('',(142.151921,-90.921896,1.545)); +#197816 = VECTOR('',#197817,1.); +#197817 = DIRECTION('',(0.,1.,0.)); +#197818 = ORIENTED_EDGE('',*,*,#197819,.F.); +#197819 = EDGE_CURVE('',#197820,#197812,#197822,.T.); +#197820 = VERTEX_POINT('',#197821); +#197821 = CARTESIAN_POINT('',(142.151921,-89.578104,1.51)); +#197822 = LINE('',#197823,#197824); +#197823 = CARTESIAN_POINT('',(142.151921,-89.578104,1.51)); +#197824 = VECTOR('',#197825,1.); +#197825 = DIRECTION('',(0.,0.,1.)); +#197826 = ORIENTED_EDGE('',*,*,#197827,.F.); +#197827 = EDGE_CURVE('',#197789,#197820,#197828,.T.); +#197828 = LINE('',#197829,#197830); +#197829 = CARTESIAN_POINT('',(142.151921,-90.921896,1.51)); +#197830 = VECTOR('',#197831,1.); +#197831 = DIRECTION('',(0.,1.,0.)); +#197832 = PLANE('',#197833); +#197833 = AXIS2_PLACEMENT_3D('',#197834,#197835,#197836); +#197834 = CARTESIAN_POINT('',(142.151921,-90.921896,1.51)); +#197835 = DIRECTION('',(-1.,0.,0.)); +#197836 = DIRECTION('',(0.,1.,0.)); +#197837 = ADVANCED_FACE('',(#197838),#197863,.T.); +#197838 = FACE_BOUND('',#197839,.T.); +#197839 = EDGE_LOOP('',(#197840,#197841,#197849,#197857)); +#197840 = ORIENTED_EDGE('',*,*,#197819,.T.); +#197841 = ORIENTED_EDGE('',*,*,#197842,.T.); +#197842 = EDGE_CURVE('',#197812,#197843,#197845,.T.); +#197843 = VERTEX_POINT('',#197844); +#197844 = CARTESIAN_POINT('',(142.166853,-89.542056,1.545)); +#197845 = LINE('',#197846,#197847); +#197846 = CARTESIAN_POINT('',(142.151921,-89.578104,1.545)); +#197847 = VECTOR('',#197848,1.); +#197848 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197849 = ORIENTED_EDGE('',*,*,#197850,.F.); +#197850 = EDGE_CURVE('',#197851,#197843,#197853,.T.); +#197851 = VERTEX_POINT('',#197852); +#197852 = CARTESIAN_POINT('',(142.166853,-89.542056,1.51)); +#197853 = LINE('',#197854,#197855); +#197854 = CARTESIAN_POINT('',(142.166853,-89.542056,1.51)); +#197855 = VECTOR('',#197856,1.); +#197856 = DIRECTION('',(0.,0.,1.)); +#197857 = ORIENTED_EDGE('',*,*,#197858,.F.); +#197858 = EDGE_CURVE('',#197820,#197851,#197859,.T.); +#197859 = LINE('',#197860,#197861); +#197860 = CARTESIAN_POINT('',(142.151921,-89.578104,1.51)); +#197861 = VECTOR('',#197862,1.); +#197862 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197863 = PLANE('',#197864); +#197864 = AXIS2_PLACEMENT_3D('',#197865,#197866,#197867); +#197865 = CARTESIAN_POINT('',(142.151921,-89.578104,1.51)); +#197866 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#197867 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197868 = ADVANCED_FACE('',(#197869),#197894,.T.); +#197869 = FACE_BOUND('',#197870,.T.); +#197870 = EDGE_LOOP('',(#197871,#197872,#197880,#197888)); +#197871 = ORIENTED_EDGE('',*,*,#197850,.T.); +#197872 = ORIENTED_EDGE('',*,*,#197873,.T.); +#197873 = EDGE_CURVE('',#197843,#197874,#197876,.T.); +#197874 = VERTEX_POINT('',#197875); +#197875 = CARTESIAN_POINT('',(142.4,-89.306191,1.545)); +#197876 = LINE('',#197877,#197878); +#197877 = CARTESIAN_POINT('',(142.166853,-89.542056,1.545)); +#197878 = VECTOR('',#197879,1.); +#197879 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197880 = ORIENTED_EDGE('',*,*,#197881,.F.); +#197881 = EDGE_CURVE('',#197882,#197874,#197884,.T.); +#197882 = VERTEX_POINT('',#197883); +#197883 = CARTESIAN_POINT('',(142.4,-89.306191,1.51)); +#197884 = LINE('',#197885,#197886); +#197885 = CARTESIAN_POINT('',(142.4,-89.306191,1.51)); +#197886 = VECTOR('',#197887,1.); +#197887 = DIRECTION('',(0.,0.,1.)); +#197888 = ORIENTED_EDGE('',*,*,#197889,.F.); +#197889 = EDGE_CURVE('',#197851,#197882,#197890,.T.); +#197890 = LINE('',#197891,#197892); +#197891 = CARTESIAN_POINT('',(142.166853,-89.542056,1.51)); +#197892 = VECTOR('',#197893,1.); +#197893 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197894 = PLANE('',#197895); +#197895 = AXIS2_PLACEMENT_3D('',#197896,#197897,#197898); +#197896 = CARTESIAN_POINT('',(142.166853,-89.542056,1.51)); +#197897 = DIRECTION('',(-0.711192636544,0.702997179031,0.)); +#197898 = DIRECTION('',(0.702997179031,0.711192636544,0.)); +#197899 = ADVANCED_FACE('',(#197900),#197925,.T.); +#197900 = FACE_BOUND('',#197901,.T.); +#197901 = EDGE_LOOP('',(#197902,#197903,#197911,#197919)); +#197902 = ORIENTED_EDGE('',*,*,#197881,.T.); +#197903 = ORIENTED_EDGE('',*,*,#197904,.T.); +#197904 = EDGE_CURVE('',#197874,#197905,#197907,.T.); +#197905 = VERTEX_POINT('',#197906); +#197906 = CARTESIAN_POINT('',(142.401921,-88.480491,1.545)); +#197907 = LINE('',#197908,#197909); +#197908 = CARTESIAN_POINT('',(142.4,-89.306191,1.545)); +#197909 = VECTOR('',#197910,1.); +#197910 = DIRECTION('',(2.326504542994E-03,0.999997293685,0.)); +#197911 = ORIENTED_EDGE('',*,*,#197912,.F.); +#197912 = EDGE_CURVE('',#197913,#197905,#197915,.T.); +#197913 = VERTEX_POINT('',#197914); +#197914 = CARTESIAN_POINT('',(142.401921,-88.480491,1.51)); +#197915 = LINE('',#197916,#197917); +#197916 = CARTESIAN_POINT('',(142.401921,-88.480491,1.51)); +#197917 = VECTOR('',#197918,1.); +#197918 = DIRECTION('',(0.,0.,1.)); +#197919 = ORIENTED_EDGE('',*,*,#197920,.F.); +#197920 = EDGE_CURVE('',#197882,#197913,#197921,.T.); +#197921 = LINE('',#197922,#197923); +#197922 = CARTESIAN_POINT('',(142.4,-89.306191,1.51)); +#197923 = VECTOR('',#197924,1.); +#197924 = DIRECTION('',(2.326504542994E-03,0.999997293685,0.)); +#197925 = PLANE('',#197926); +#197926 = AXIS2_PLACEMENT_3D('',#197927,#197928,#197929); +#197927 = CARTESIAN_POINT('',(142.4,-89.306191,1.51)); +#197928 = DIRECTION('',(-0.999997293685,2.326504542994E-03,0.)); +#197929 = DIRECTION('',(2.326504542994E-03,0.999997293685,0.)); +#197930 = ADVANCED_FACE('',(#197931),#197956,.T.); +#197931 = FACE_BOUND('',#197932,.T.); +#197932 = EDGE_LOOP('',(#197933,#197934,#197942,#197950)); +#197933 = ORIENTED_EDGE('',*,*,#197912,.T.); +#197934 = ORIENTED_EDGE('',*,*,#197935,.T.); +#197935 = EDGE_CURVE('',#197905,#197936,#197938,.T.); +#197936 = VERTEX_POINT('',#197937); +#197937 = CARTESIAN_POINT('',(142.416853,-88.444443,1.545)); +#197938 = LINE('',#197939,#197940); +#197939 = CARTESIAN_POINT('',(142.401921,-88.480491,1.545)); +#197940 = VECTOR('',#197941,1.); +#197941 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197942 = ORIENTED_EDGE('',*,*,#197943,.F.); +#197943 = EDGE_CURVE('',#197944,#197936,#197946,.T.); +#197944 = VERTEX_POINT('',#197945); +#197945 = CARTESIAN_POINT('',(142.416853,-88.444443,1.51)); +#197946 = LINE('',#197947,#197948); +#197947 = CARTESIAN_POINT('',(142.416853,-88.444443,1.51)); +#197948 = VECTOR('',#197949,1.); +#197949 = DIRECTION('',(0.,0.,1.)); +#197950 = ORIENTED_EDGE('',*,*,#197951,.F.); +#197951 = EDGE_CURVE('',#197913,#197944,#197952,.T.); +#197952 = LINE('',#197953,#197954); +#197953 = CARTESIAN_POINT('',(142.401921,-88.480491,1.51)); +#197954 = VECTOR('',#197955,1.); +#197955 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197956 = PLANE('',#197957); +#197957 = AXIS2_PLACEMENT_3D('',#197958,#197959,#197960); +#197958 = CARTESIAN_POINT('',(142.401921,-88.480491,1.51)); +#197959 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#197960 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#197961 = ADVANCED_FACE('',(#197962),#197987,.T.); +#197962 = FACE_BOUND('',#197963,.T.); +#197963 = EDGE_LOOP('',(#197964,#197965,#197973,#197981)); +#197964 = ORIENTED_EDGE('',*,*,#197943,.T.); +#197965 = ORIENTED_EDGE('',*,*,#197966,.T.); +#197966 = EDGE_CURVE('',#197936,#197967,#197969,.T.); +#197967 = VERTEX_POINT('',#197968); +#197968 = CARTESIAN_POINT('',(143.730499,-87.128079,1.545)); +#197969 = LINE('',#197970,#197971); +#197970 = CARTESIAN_POINT('',(142.416853,-88.444443,1.545)); +#197971 = VECTOR('',#197972,1.); +#197972 = DIRECTION('',(0.706375640122,0.70783716704,0.)); +#197973 = ORIENTED_EDGE('',*,*,#197974,.F.); +#197974 = EDGE_CURVE('',#197975,#197967,#197977,.T.); +#197975 = VERTEX_POINT('',#197976); +#197976 = CARTESIAN_POINT('',(143.730499,-87.128079,1.51)); +#197977 = LINE('',#197978,#197979); +#197978 = CARTESIAN_POINT('',(143.730499,-87.128079,1.51)); +#197979 = VECTOR('',#197980,1.); +#197980 = DIRECTION('',(0.,0.,1.)); +#197981 = ORIENTED_EDGE('',*,*,#197982,.F.); +#197982 = EDGE_CURVE('',#197944,#197975,#197983,.T.); +#197983 = LINE('',#197984,#197985); +#197984 = CARTESIAN_POINT('',(142.416853,-88.444443,1.51)); +#197985 = VECTOR('',#197986,1.); +#197986 = DIRECTION('',(0.706375640122,0.70783716704,0.)); +#197987 = PLANE('',#197988); +#197988 = AXIS2_PLACEMENT_3D('',#197989,#197990,#197991); +#197989 = CARTESIAN_POINT('',(142.416853,-88.444443,1.51)); +#197990 = DIRECTION('',(-0.70783716704,0.706375640122,0.)); +#197991 = DIRECTION('',(0.706375640122,0.70783716704,0.)); +#197992 = ADVANCED_FACE('',(#197993),#198018,.T.); +#197993 = FACE_BOUND('',#197994,.T.); +#197994 = EDGE_LOOP('',(#197995,#197996,#198004,#198012)); +#197995 = ORIENTED_EDGE('',*,*,#197974,.T.); +#197996 = ORIENTED_EDGE('',*,*,#197997,.T.); +#197997 = EDGE_CURVE('',#197967,#197998,#198000,.T.); +#197998 = VERTEX_POINT('',#197999); +#197999 = CARTESIAN_POINT('',(143.722836,-87.114805,1.545)); +#198000 = LINE('',#198001,#198002); +#198001 = CARTESIAN_POINT('',(143.730499,-87.128079,1.545)); +#198002 = VECTOR('',#198003,1.); +#198003 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#198004 = ORIENTED_EDGE('',*,*,#198005,.F.); +#198005 = EDGE_CURVE('',#198006,#197998,#198008,.T.); +#198006 = VERTEX_POINT('',#198007); +#198007 = CARTESIAN_POINT('',(143.722836,-87.114805,1.51)); +#198008 = LINE('',#198009,#198010); +#198009 = CARTESIAN_POINT('',(143.722836,-87.114805,1.51)); +#198010 = VECTOR('',#198011,1.); +#198011 = DIRECTION('',(0.,0.,1.)); +#198012 = ORIENTED_EDGE('',*,*,#198013,.F.); +#198013 = EDGE_CURVE('',#197975,#198006,#198014,.T.); +#198014 = LINE('',#198015,#198016); +#198015 = CARTESIAN_POINT('',(143.730499,-87.128079,1.51)); +#198016 = VECTOR('',#198017,1.); +#198017 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#198018 = PLANE('',#198019); +#198019 = AXIS2_PLACEMENT_3D('',#198020,#198021,#198022); +#198020 = CARTESIAN_POINT('',(143.730499,-87.128079,1.51)); +#198021 = DIRECTION('',(-0.86604652018,-0.499963423546,0.)); +#198022 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#198023 = ADVANCED_FACE('',(#198024),#198051,.T.); +#198024 = FACE_BOUND('',#198025,.T.); +#198025 = EDGE_LOOP('',(#198026,#198027,#198036,#198044)); +#198026 = ORIENTED_EDGE('',*,*,#198005,.T.); +#198027 = ORIENTED_EDGE('',*,*,#198028,.T.); +#198028 = EDGE_CURVE('',#197998,#198029,#198031,.T.); +#198029 = VERTEX_POINT('',#198030); +#198030 = CARTESIAN_POINT('',(143.885195,-87.277164,1.545)); +#198031 = CIRCLE('',#198032,0.300000118202); +#198032 = AXIS2_PLACEMENT_3D('',#198033,#198034,#198035); +#198033 = CARTESIAN_POINT('',(144.,-87.,1.545)); +#198034 = DIRECTION('',(0.,0.,-1.)); +#198035 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#198036 = ORIENTED_EDGE('',*,*,#198037,.F.); +#198037 = EDGE_CURVE('',#198038,#198029,#198040,.T.); +#198038 = VERTEX_POINT('',#198039); +#198039 = CARTESIAN_POINT('',(143.885195,-87.277164,1.51)); +#198040 = LINE('',#198041,#198042); +#198041 = CARTESIAN_POINT('',(143.885195,-87.277164,1.51)); +#198042 = VECTOR('',#198043,1.); +#198043 = DIRECTION('',(0.,0.,1.)); +#198044 = ORIENTED_EDGE('',*,*,#198045,.F.); +#198045 = EDGE_CURVE('',#198006,#198038,#198046,.T.); +#198046 = CIRCLE('',#198047,0.300000118202); +#198047 = AXIS2_PLACEMENT_3D('',#198048,#198049,#198050); +#198048 = CARTESIAN_POINT('',(144.,-87.,1.51)); +#198049 = DIRECTION('',(0.,0.,-1.)); +#198050 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#198051 = CYLINDRICAL_SURFACE('',#198052,0.300000118202); +#198052 = AXIS2_PLACEMENT_3D('',#198053,#198054,#198055); +#198053 = CARTESIAN_POINT('',(144.,-87.,1.51)); +#198054 = DIRECTION('',(0.,0.,-1.)); +#198055 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#198056 = ADVANCED_FACE('',(#198057),#198073,.T.); +#198057 = FACE_BOUND('',#198058,.T.); +#198058 = EDGE_LOOP('',(#198059,#198060,#198066,#198067)); +#198059 = ORIENTED_EDGE('',*,*,#198037,.T.); +#198060 = ORIENTED_EDGE('',*,*,#198061,.T.); +#198061 = EDGE_CURVE('',#198029,#196531,#198062,.T.); +#198062 = LINE('',#198063,#198064); +#198063 = CARTESIAN_POINT('',(143.885195,-87.277164,1.545)); +#198064 = VECTOR('',#198065,1.); +#198065 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#198066 = ORIENTED_EDGE('',*,*,#196528,.F.); +#198067 = ORIENTED_EDGE('',*,*,#198068,.F.); +#198068 = EDGE_CURVE('',#198038,#196529,#198069,.T.); +#198069 = LINE('',#198070,#198071); +#198070 = CARTESIAN_POINT('',(143.885195,-87.277164,1.51)); +#198071 = VECTOR('',#198072,1.); +#198072 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#198073 = PLANE('',#198074); +#198074 = AXIS2_PLACEMENT_3D('',#198075,#198076,#198077); +#198075 = CARTESIAN_POINT('',(143.885195,-87.277164,1.51)); +#198076 = DIRECTION('',(-0.499984106787,-0.866034579541,0.)); +#198077 = DIRECTION('',(-0.866034579541,0.499984106787,0.)); +#198078 = ADVANCED_FACE('',(#198079),#198106,.F.); +#198079 = FACE_BOUND('',#198080,.T.); +#198080 = EDGE_LOOP('',(#198081,#198091,#198098,#198099)); +#198081 = ORIENTED_EDGE('',*,*,#198082,.T.); +#198082 = EDGE_CURVE('',#198083,#198085,#198087,.T.); +#198083 = VERTEX_POINT('',#198084); +#198084 = CARTESIAN_POINT('',(141.637255,-115.387868,1.51)); +#198085 = VERTEX_POINT('',#198086); +#198086 = CARTESIAN_POINT('',(141.637255,-115.387868,1.545)); +#198087 = LINE('',#198088,#198089); +#198088 = CARTESIAN_POINT('',(141.637255,-115.387868,1.51)); +#198089 = VECTOR('',#198090,1.); +#198090 = DIRECTION('',(0.,0.,1.)); +#198091 = ORIENTED_EDGE('',*,*,#198092,.T.); +#198092 = EDGE_CURVE('',#198085,#198085,#198093,.T.); +#198093 = CIRCLE('',#198094,0.137255); +#198094 = AXIS2_PLACEMENT_3D('',#198095,#198096,#198097); +#198095 = CARTESIAN_POINT('',(141.5,-115.387868,1.545)); +#198096 = DIRECTION('',(0.,0.,1.)); +#198097 = DIRECTION('',(1.,0.,-0.)); +#198098 = ORIENTED_EDGE('',*,*,#198082,.F.); +#198099 = ORIENTED_EDGE('',*,*,#198100,.F.); +#198100 = EDGE_CURVE('',#198083,#198083,#198101,.T.); +#198101 = CIRCLE('',#198102,0.137255); +#198102 = AXIS2_PLACEMENT_3D('',#198103,#198104,#198105); +#198103 = CARTESIAN_POINT('',(141.5,-115.387868,1.51)); +#198104 = DIRECTION('',(0.,0.,1.)); +#198105 = DIRECTION('',(1.,0.,-0.)); +#198106 = CYLINDRICAL_SURFACE('',#198107,0.137255); +#198107 = AXIS2_PLACEMENT_3D('',#198108,#198109,#198110); +#198108 = CARTESIAN_POINT('',(141.5,-115.387868,1.51)); +#198109 = DIRECTION('',(-0.,-0.,-1.)); +#198110 = DIRECTION('',(1.,0.,-0.)); +#198111 = ADVANCED_FACE('',(#198112),#198139,.F.); +#198112 = FACE_BOUND('',#198113,.T.); +#198113 = EDGE_LOOP('',(#198114,#198124,#198131,#198132)); +#198114 = ORIENTED_EDGE('',*,*,#198115,.T.); +#198115 = EDGE_CURVE('',#198116,#198118,#198120,.T.); +#198116 = VERTEX_POINT('',#198117); +#198117 = CARTESIAN_POINT('',(144.137255,-87.,1.51)); +#198118 = VERTEX_POINT('',#198119); +#198119 = CARTESIAN_POINT('',(144.137255,-87.,1.545)); +#198120 = LINE('',#198121,#198122); +#198121 = CARTESIAN_POINT('',(144.137255,-87.,1.51)); +#198122 = VECTOR('',#198123,1.); +#198123 = DIRECTION('',(0.,0.,1.)); +#198124 = ORIENTED_EDGE('',*,*,#198125,.T.); +#198125 = EDGE_CURVE('',#198118,#198118,#198126,.T.); +#198126 = CIRCLE('',#198127,0.137255); +#198127 = AXIS2_PLACEMENT_3D('',#198128,#198129,#198130); +#198128 = CARTESIAN_POINT('',(144.,-87.,1.545)); +#198129 = DIRECTION('',(0.,0.,1.)); +#198130 = DIRECTION('',(1.,0.,-0.)); +#198131 = ORIENTED_EDGE('',*,*,#198115,.F.); +#198132 = ORIENTED_EDGE('',*,*,#198133,.F.); +#198133 = EDGE_CURVE('',#198116,#198116,#198134,.T.); +#198134 = CIRCLE('',#198135,0.137255); +#198135 = AXIS2_PLACEMENT_3D('',#198136,#198137,#198138); +#198136 = CARTESIAN_POINT('',(144.,-87.,1.51)); +#198137 = DIRECTION('',(0.,0.,1.)); +#198138 = DIRECTION('',(1.,0.,-0.)); +#198139 = CYLINDRICAL_SURFACE('',#198140,0.137255); +#198140 = AXIS2_PLACEMENT_3D('',#198141,#198142,#198143); +#198141 = CARTESIAN_POINT('',(144.,-87.,1.51)); +#198142 = DIRECTION('',(-0.,-0.,-1.)); +#198143 = DIRECTION('',(1.,0.,-0.)); +#198144 = ADVANCED_FACE('',(#198145,#198197,#198200),#198203,.F.); +#198145 = FACE_BOUND('',#198146,.T.); +#198146 = EDGE_LOOP('',(#198147,#198148,#198149,#198150,#198151,#198152, + #198153,#198154,#198155,#198156,#198157,#198158,#198159,#198160, + #198161,#198162,#198163,#198164,#198165,#198166,#198167,#198168, + #198169,#198170,#198171,#198172,#198173,#198174,#198175,#198176, + #198177,#198178,#198179,#198180,#198181,#198182,#198183,#198184, + #198185,#198186,#198187,#198188,#198189,#198190,#198191,#198192, + #198193,#198194,#198195,#198196)); +#198147 = ORIENTED_EDGE('',*,*,#196554,.T.); +#198148 = ORIENTED_EDGE('',*,*,#196585,.T.); +#198149 = ORIENTED_EDGE('',*,*,#196616,.T.); +#198150 = ORIENTED_EDGE('',*,*,#196647,.T.); +#198151 = ORIENTED_EDGE('',*,*,#196678,.T.); +#198152 = ORIENTED_EDGE('',*,*,#196709,.T.); +#198153 = ORIENTED_EDGE('',*,*,#196740,.T.); +#198154 = ORIENTED_EDGE('',*,*,#196771,.T.); +#198155 = ORIENTED_EDGE('',*,*,#196802,.T.); +#198156 = ORIENTED_EDGE('',*,*,#196833,.T.); +#198157 = ORIENTED_EDGE('',*,*,#196864,.T.); +#198158 = ORIENTED_EDGE('',*,*,#196895,.T.); +#198159 = ORIENTED_EDGE('',*,*,#196926,.T.); +#198160 = ORIENTED_EDGE('',*,*,#196957,.T.); +#198161 = ORIENTED_EDGE('',*,*,#196988,.T.); +#198162 = ORIENTED_EDGE('',*,*,#197019,.T.); +#198163 = ORIENTED_EDGE('',*,*,#197050,.T.); +#198164 = ORIENTED_EDGE('',*,*,#197081,.T.); +#198165 = ORIENTED_EDGE('',*,*,#197112,.T.); +#198166 = ORIENTED_EDGE('',*,*,#197143,.T.); +#198167 = ORIENTED_EDGE('',*,*,#197174,.T.); +#198168 = ORIENTED_EDGE('',*,*,#197205,.T.); +#198169 = ORIENTED_EDGE('',*,*,#197236,.T.); +#198170 = ORIENTED_EDGE('',*,*,#197268,.T.); +#198171 = ORIENTED_EDGE('',*,*,#197300,.T.); +#198172 = ORIENTED_EDGE('',*,*,#197331,.T.); +#198173 = ORIENTED_EDGE('',*,*,#197362,.T.); +#198174 = ORIENTED_EDGE('',*,*,#197393,.T.); +#198175 = ORIENTED_EDGE('',*,*,#197424,.T.); +#198176 = ORIENTED_EDGE('',*,*,#197455,.T.); +#198177 = ORIENTED_EDGE('',*,*,#197486,.T.); +#198178 = ORIENTED_EDGE('',*,*,#197517,.T.); +#198179 = ORIENTED_EDGE('',*,*,#197548,.T.); +#198180 = ORIENTED_EDGE('',*,*,#197579,.T.); +#198181 = ORIENTED_EDGE('',*,*,#197610,.T.); +#198182 = ORIENTED_EDGE('',*,*,#197641,.T.); +#198183 = ORIENTED_EDGE('',*,*,#197672,.T.); +#198184 = ORIENTED_EDGE('',*,*,#197703,.T.); +#198185 = ORIENTED_EDGE('',*,*,#197734,.T.); +#198186 = ORIENTED_EDGE('',*,*,#197765,.T.); +#198187 = ORIENTED_EDGE('',*,*,#197796,.T.); +#198188 = ORIENTED_EDGE('',*,*,#197827,.T.); +#198189 = ORIENTED_EDGE('',*,*,#197858,.T.); +#198190 = ORIENTED_EDGE('',*,*,#197889,.T.); +#198191 = ORIENTED_EDGE('',*,*,#197920,.T.); +#198192 = ORIENTED_EDGE('',*,*,#197951,.T.); +#198193 = ORIENTED_EDGE('',*,*,#197982,.T.); +#198194 = ORIENTED_EDGE('',*,*,#198013,.T.); +#198195 = ORIENTED_EDGE('',*,*,#198045,.T.); +#198196 = ORIENTED_EDGE('',*,*,#198068,.T.); +#198197 = FACE_BOUND('',#198198,.T.); +#198198 = EDGE_LOOP('',(#198199)); +#198199 = ORIENTED_EDGE('',*,*,#198100,.T.); +#198200 = FACE_BOUND('',#198201,.T.); +#198201 = EDGE_LOOP('',(#198202)); +#198202 = ORIENTED_EDGE('',*,*,#198133,.T.); +#198203 = PLANE('',#198204); +#198204 = AXIS2_PLACEMENT_3D('',#198205,#198206,#198207); +#198205 = CARTESIAN_POINT('',(0.,0.,1.51)); +#198206 = DIRECTION('',(0.,0.,1.)); +#198207 = DIRECTION('',(1.,0.,-0.)); +#198208 = ADVANCED_FACE('',(#198209,#198261,#198264),#198267,.T.); +#198209 = FACE_BOUND('',#198210,.F.); +#198210 = EDGE_LOOP('',(#198211,#198212,#198213,#198214,#198215,#198216, + #198217,#198218,#198219,#198220,#198221,#198222,#198223,#198224, + #198225,#198226,#198227,#198228,#198229,#198230,#198231,#198232, + #198233,#198234,#198235,#198236,#198237,#198238,#198239,#198240, + #198241,#198242,#198243,#198244,#198245,#198246,#198247,#198248, + #198249,#198250,#198251,#198252,#198253,#198254,#198255,#198256, + #198257,#198258,#198259,#198260)); +#198211 = ORIENTED_EDGE('',*,*,#196538,.T.); +#198212 = ORIENTED_EDGE('',*,*,#196569,.T.); +#198213 = ORIENTED_EDGE('',*,*,#196600,.T.); +#198214 = ORIENTED_EDGE('',*,*,#196631,.T.); +#198215 = ORIENTED_EDGE('',*,*,#196662,.T.); +#198216 = ORIENTED_EDGE('',*,*,#196693,.T.); +#198217 = ORIENTED_EDGE('',*,*,#196724,.T.); +#198218 = ORIENTED_EDGE('',*,*,#196755,.T.); +#198219 = ORIENTED_EDGE('',*,*,#196786,.T.); +#198220 = ORIENTED_EDGE('',*,*,#196817,.T.); +#198221 = ORIENTED_EDGE('',*,*,#196848,.T.); +#198222 = ORIENTED_EDGE('',*,*,#196879,.T.); +#198223 = ORIENTED_EDGE('',*,*,#196910,.T.); +#198224 = ORIENTED_EDGE('',*,*,#196941,.T.); +#198225 = ORIENTED_EDGE('',*,*,#196972,.T.); +#198226 = ORIENTED_EDGE('',*,*,#197003,.T.); +#198227 = ORIENTED_EDGE('',*,*,#197034,.T.); +#198228 = ORIENTED_EDGE('',*,*,#197065,.T.); +#198229 = ORIENTED_EDGE('',*,*,#197096,.T.); +#198230 = ORIENTED_EDGE('',*,*,#197127,.T.); +#198231 = ORIENTED_EDGE('',*,*,#197158,.T.); +#198232 = ORIENTED_EDGE('',*,*,#197189,.T.); +#198233 = ORIENTED_EDGE('',*,*,#197220,.T.); +#198234 = ORIENTED_EDGE('',*,*,#197251,.T.); +#198235 = ORIENTED_EDGE('',*,*,#197284,.T.); +#198236 = ORIENTED_EDGE('',*,*,#197315,.T.); +#198237 = ORIENTED_EDGE('',*,*,#197346,.T.); +#198238 = ORIENTED_EDGE('',*,*,#197377,.T.); +#198239 = ORIENTED_EDGE('',*,*,#197408,.T.); +#198240 = ORIENTED_EDGE('',*,*,#197439,.T.); +#198241 = ORIENTED_EDGE('',*,*,#197470,.T.); +#198242 = ORIENTED_EDGE('',*,*,#197501,.T.); +#198243 = ORIENTED_EDGE('',*,*,#197532,.T.); +#198244 = ORIENTED_EDGE('',*,*,#197563,.T.); +#198245 = ORIENTED_EDGE('',*,*,#197594,.T.); +#198246 = ORIENTED_EDGE('',*,*,#197625,.T.); +#198247 = ORIENTED_EDGE('',*,*,#197656,.T.); +#198248 = ORIENTED_EDGE('',*,*,#197687,.T.); +#198249 = ORIENTED_EDGE('',*,*,#197718,.T.); +#198250 = ORIENTED_EDGE('',*,*,#197749,.T.); +#198251 = ORIENTED_EDGE('',*,*,#197780,.T.); +#198252 = ORIENTED_EDGE('',*,*,#197811,.T.); +#198253 = ORIENTED_EDGE('',*,*,#197842,.T.); +#198254 = ORIENTED_EDGE('',*,*,#197873,.T.); +#198255 = ORIENTED_EDGE('',*,*,#197904,.T.); +#198256 = ORIENTED_EDGE('',*,*,#197935,.T.); +#198257 = ORIENTED_EDGE('',*,*,#197966,.T.); +#198258 = ORIENTED_EDGE('',*,*,#197997,.T.); +#198259 = ORIENTED_EDGE('',*,*,#198028,.T.); +#198260 = ORIENTED_EDGE('',*,*,#198061,.T.); +#198261 = FACE_BOUND('',#198262,.F.); +#198262 = EDGE_LOOP('',(#198263)); +#198263 = ORIENTED_EDGE('',*,*,#198092,.T.); +#198264 = FACE_BOUND('',#198265,.F.); +#198265 = EDGE_LOOP('',(#198266)); +#198266 = ORIENTED_EDGE('',*,*,#198125,.T.); +#198267 = PLANE('',#198268); +#198268 = AXIS2_PLACEMENT_3D('',#198269,#198270,#198271); +#198269 = CARTESIAN_POINT('',(0.,0.,1.545)); +#198270 = DIRECTION('',(0.,0.,1.)); +#198271 = DIRECTION('',(1.,0.,-0.)); +#198272 = MANIFOLD_SOLID_BREP('',#198273); +#198273 = CLOSED_SHELL('',(#198274,#198314,#198345,#198378,#198409, + #198440,#198471,#198504,#198535,#198557,#198590,#198610)); +#198274 = ADVANCED_FACE('',(#198275),#198309,.T.); +#198275 = FACE_BOUND('',#198276,.T.); +#198276 = EDGE_LOOP('',(#198277,#198287,#198295,#198303)); +#198277 = ORIENTED_EDGE('',*,*,#198278,.T.); +#198278 = EDGE_CURVE('',#198279,#198281,#198283,.T.); +#198279 = VERTEX_POINT('',#198280); +#198280 = CARTESIAN_POINT('',(146.094443,-77.266852,1.51)); +#198281 = VERTEX_POINT('',#198282); +#198282 = CARTESIAN_POINT('',(146.094443,-77.266852,1.545)); +#198283 = LINE('',#198284,#198285); +#198284 = CARTESIAN_POINT('',(146.094443,-77.266852,1.51)); +#198285 = VECTOR('',#198286,1.); +#198286 = DIRECTION('',(0.,0.,1.)); +#198287 = ORIENTED_EDGE('',*,*,#198288,.T.); +#198288 = EDGE_CURVE('',#198281,#198289,#198291,.T.); +#198289 = VERTEX_POINT('',#198290); +#198290 = CARTESIAN_POINT('',(146.130491,-77.251921,1.545)); +#198291 = LINE('',#198292,#198293); +#198292 = CARTESIAN_POINT('',(146.094443,-77.266852,1.545)); +#198293 = VECTOR('',#198294,1.); +#198294 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#198295 = ORIENTED_EDGE('',*,*,#198296,.F.); +#198296 = EDGE_CURVE('',#198297,#198289,#198299,.T.); +#198297 = VERTEX_POINT('',#198298); +#198298 = CARTESIAN_POINT('',(146.130491,-77.251921,1.51)); +#198299 = LINE('',#198300,#198301); +#198300 = CARTESIAN_POINT('',(146.130491,-77.251921,1.51)); +#198301 = VECTOR('',#198302,1.); +#198302 = DIRECTION('',(0.,0.,1.)); +#198303 = ORIENTED_EDGE('',*,*,#198304,.F.); +#198304 = EDGE_CURVE('',#198279,#198297,#198305,.T.); +#198305 = LINE('',#198306,#198307); +#198306 = CARTESIAN_POINT('',(146.094443,-77.266852,1.51)); +#198307 = VECTOR('',#198308,1.); +#198308 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#198309 = PLANE('',#198310); +#198310 = AXIS2_PLACEMENT_3D('',#198311,#198312,#198313); +#198311 = CARTESIAN_POINT('',(146.094443,-77.266852,1.51)); +#198312 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#198313 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#198314 = ADVANCED_FACE('',(#198315),#198340,.T.); +#198315 = FACE_BOUND('',#198316,.T.); +#198316 = EDGE_LOOP('',(#198317,#198318,#198326,#198334)); +#198317 = ORIENTED_EDGE('',*,*,#198296,.T.); +#198318 = ORIENTED_EDGE('',*,*,#198319,.T.); +#198319 = EDGE_CURVE('',#198289,#198320,#198322,.T.); +#198320 = VERTEX_POINT('',#198321); +#198321 = CARTESIAN_POINT('',(146.769509,-77.251921,1.545)); +#198322 = LINE('',#198323,#198324); +#198323 = CARTESIAN_POINT('',(146.130491,-77.251921,1.545)); +#198324 = VECTOR('',#198325,1.); +#198325 = DIRECTION('',(1.,0.,0.)); +#198326 = ORIENTED_EDGE('',*,*,#198327,.F.); +#198327 = EDGE_CURVE('',#198328,#198320,#198330,.T.); +#198328 = VERTEX_POINT('',#198329); +#198329 = CARTESIAN_POINT('',(146.769509,-77.251921,1.51)); +#198330 = LINE('',#198331,#198332); +#198331 = CARTESIAN_POINT('',(146.769509,-77.251921,1.51)); +#198332 = VECTOR('',#198333,1.); +#198333 = DIRECTION('',(0.,0.,1.)); +#198334 = ORIENTED_EDGE('',*,*,#198335,.F.); +#198335 = EDGE_CURVE('',#198297,#198328,#198336,.T.); +#198336 = LINE('',#198337,#198338); +#198337 = CARTESIAN_POINT('',(146.130491,-77.251921,1.51)); +#198338 = VECTOR('',#198339,1.); +#198339 = DIRECTION('',(1.,0.,0.)); +#198340 = PLANE('',#198341); +#198341 = AXIS2_PLACEMENT_3D('',#198342,#198343,#198344); +#198342 = CARTESIAN_POINT('',(146.130491,-77.251921,1.51)); +#198343 = DIRECTION('',(0.,1.,0.)); +#198344 = DIRECTION('',(1.,0.,0.)); +#198345 = ADVANCED_FACE('',(#198346),#198373,.T.); +#198346 = FACE_BOUND('',#198347,.T.); +#198347 = EDGE_LOOP('',(#198348,#198349,#198358,#198366)); +#198348 = ORIENTED_EDGE('',*,*,#198327,.T.); +#198349 = ORIENTED_EDGE('',*,*,#198350,.T.); +#198350 = EDGE_CURVE('',#198320,#198351,#198353,.T.); +#198351 = VERTEX_POINT('',#198352); +#198352 = CARTESIAN_POINT('',(146.769509,-77.448079,1.545)); +#198353 = CIRCLE('',#198354,0.100000456609); +#198354 = AXIS2_PLACEMENT_3D('',#198355,#198356,#198357); +#198355 = CARTESIAN_POINT('',(146.75,-77.35,1.545)); +#198356 = DIRECTION('',(0.,0.,-1.)); +#198357 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#198358 = ORIENTED_EDGE('',*,*,#198359,.F.); +#198359 = EDGE_CURVE('',#198360,#198351,#198362,.T.); +#198360 = VERTEX_POINT('',#198361); +#198361 = CARTESIAN_POINT('',(146.769509,-77.448079,1.51)); +#198362 = LINE('',#198363,#198364); +#198363 = CARTESIAN_POINT('',(146.769509,-77.448079,1.51)); +#198364 = VECTOR('',#198365,1.); +#198365 = DIRECTION('',(0.,0.,1.)); +#198366 = ORIENTED_EDGE('',*,*,#198367,.F.); +#198367 = EDGE_CURVE('',#198328,#198360,#198368,.T.); +#198368 = CIRCLE('',#198369,0.100000456609); +#198369 = AXIS2_PLACEMENT_3D('',#198370,#198371,#198372); +#198370 = CARTESIAN_POINT('',(146.75,-77.35,1.51)); +#198371 = DIRECTION('',(0.,0.,-1.)); +#198372 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#198373 = CYLINDRICAL_SURFACE('',#198374,0.100000456609); +#198374 = AXIS2_PLACEMENT_3D('',#198375,#198376,#198377); +#198375 = CARTESIAN_POINT('',(146.75,-77.35,1.51)); +#198376 = DIRECTION('',(0.,0.,-1.)); +#198377 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#198378 = ADVANCED_FACE('',(#198379),#198404,.T.); +#198379 = FACE_BOUND('',#198380,.T.); +#198380 = EDGE_LOOP('',(#198381,#198382,#198390,#198398)); +#198381 = ORIENTED_EDGE('',*,*,#198359,.T.); +#198382 = ORIENTED_EDGE('',*,*,#198383,.T.); +#198383 = EDGE_CURVE('',#198351,#198384,#198386,.T.); +#198384 = VERTEX_POINT('',#198385); +#198385 = CARTESIAN_POINT('',(146.191421,-77.45,1.545)); +#198386 = LINE('',#198387,#198388); +#198387 = CARTESIAN_POINT('',(146.769509,-77.448079,1.545)); +#198388 = VECTOR('',#198389,1.); +#198389 = DIRECTION('',(-0.999994478803,-3.32300513724E-03,0.)); +#198390 = ORIENTED_EDGE('',*,*,#198391,.F.); +#198391 = EDGE_CURVE('',#198392,#198384,#198394,.T.); +#198392 = VERTEX_POINT('',#198393); +#198393 = CARTESIAN_POINT('',(146.191421,-77.45,1.51)); +#198394 = LINE('',#198395,#198396); +#198395 = CARTESIAN_POINT('',(146.191421,-77.45,1.51)); +#198396 = VECTOR('',#198397,1.); +#198397 = DIRECTION('',(0.,0.,1.)); +#198398 = ORIENTED_EDGE('',*,*,#198399,.F.); +#198399 = EDGE_CURVE('',#198360,#198392,#198400,.T.); +#198400 = LINE('',#198401,#198402); +#198401 = CARTESIAN_POINT('',(146.769509,-77.448079,1.51)); +#198402 = VECTOR('',#198403,1.); +#198403 = DIRECTION('',(-0.999994478803,-3.32300513724E-03,0.)); +#198404 = PLANE('',#198405); +#198405 = AXIS2_PLACEMENT_3D('',#198406,#198407,#198408); +#198406 = CARTESIAN_POINT('',(146.769509,-77.448079,1.51)); +#198407 = DIRECTION('',(3.32300513724E-03,-0.999994478803,0.)); +#198408 = DIRECTION('',(-0.999994478803,-3.32300513724E-03,0.)); +#198409 = ADVANCED_FACE('',(#198410),#198435,.T.); +#198410 = FACE_BOUND('',#198411,.T.); +#198411 = EDGE_LOOP('',(#198412,#198413,#198421,#198429)); +#198412 = ORIENTED_EDGE('',*,*,#198391,.T.); +#198413 = ORIENTED_EDGE('',*,*,#198414,.T.); +#198414 = EDGE_CURVE('',#198384,#198415,#198417,.T.); +#198415 = VERTEX_POINT('',#198416); +#198416 = CARTESIAN_POINT('',(145.2695,-78.371921,1.545)); +#198417 = LINE('',#198418,#198419); +#198418 = CARTESIAN_POINT('',(146.191421,-77.45,1.545)); +#198419 = VECTOR('',#198420,1.); +#198420 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198421 = ORIENTED_EDGE('',*,*,#198422,.F.); +#198422 = EDGE_CURVE('',#198423,#198415,#198425,.T.); +#198423 = VERTEX_POINT('',#198424); +#198424 = CARTESIAN_POINT('',(145.2695,-78.371921,1.51)); +#198425 = LINE('',#198426,#198427); +#198426 = CARTESIAN_POINT('',(145.2695,-78.371921,1.51)); +#198427 = VECTOR('',#198428,1.); +#198428 = DIRECTION('',(0.,0.,1.)); +#198429 = ORIENTED_EDGE('',*,*,#198430,.F.); +#198430 = EDGE_CURVE('',#198392,#198423,#198431,.T.); +#198431 = LINE('',#198432,#198433); +#198432 = CARTESIAN_POINT('',(146.191421,-77.45,1.51)); +#198433 = VECTOR('',#198434,1.); +#198434 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198435 = PLANE('',#198436); +#198436 = AXIS2_PLACEMENT_3D('',#198437,#198438,#198439); +#198437 = CARTESIAN_POINT('',(146.191421,-77.45,1.51)); +#198438 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#198439 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198440 = ADVANCED_FACE('',(#198441),#198466,.T.); +#198441 = FACE_BOUND('',#198442,.T.); +#198442 = EDGE_LOOP('',(#198443,#198444,#198452,#198460)); +#198443 = ORIENTED_EDGE('',*,*,#198422,.T.); +#198444 = ORIENTED_EDGE('',*,*,#198445,.T.); +#198445 = EDGE_CURVE('',#198415,#198446,#198448,.T.); +#198446 = VERTEX_POINT('',#198447); +#198447 = CARTESIAN_POINT('',(145.277164,-78.385195,1.545)); +#198448 = LINE('',#198449,#198450); +#198449 = CARTESIAN_POINT('',(145.2695,-78.371921,1.545)); +#198450 = VECTOR('',#198451,1.); +#198451 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#198452 = ORIENTED_EDGE('',*,*,#198453,.F.); +#198453 = EDGE_CURVE('',#198454,#198446,#198456,.T.); +#198454 = VERTEX_POINT('',#198455); +#198455 = CARTESIAN_POINT('',(145.277164,-78.385195,1.51)); +#198456 = LINE('',#198457,#198458); +#198457 = CARTESIAN_POINT('',(145.277164,-78.385195,1.51)); +#198458 = VECTOR('',#198459,1.); +#198459 = DIRECTION('',(0.,0.,1.)); +#198460 = ORIENTED_EDGE('',*,*,#198461,.F.); +#198461 = EDGE_CURVE('',#198423,#198454,#198462,.T.); +#198462 = LINE('',#198463,#198464); +#198463 = CARTESIAN_POINT('',(145.2695,-78.371921,1.51)); +#198464 = VECTOR('',#198465,1.); +#198465 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#198466 = PLANE('',#198467); +#198467 = AXIS2_PLACEMENT_3D('',#198468,#198469,#198470); +#198468 = CARTESIAN_POINT('',(145.2695,-78.371921,1.51)); +#198469 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#198470 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#198471 = ADVANCED_FACE('',(#198472),#198499,.T.); +#198472 = FACE_BOUND('',#198473,.T.); +#198473 = EDGE_LOOP('',(#198474,#198475,#198484,#198492)); +#198474 = ORIENTED_EDGE('',*,*,#198453,.T.); +#198475 = ORIENTED_EDGE('',*,*,#198476,.T.); +#198476 = EDGE_CURVE('',#198446,#198477,#198479,.T.); +#198477 = VERTEX_POINT('',#198478); +#198478 = CARTESIAN_POINT('',(145.114805,-78.222836,1.545)); +#198479 = CIRCLE('',#198480,0.299999934501); +#198480 = AXIS2_PLACEMENT_3D('',#198481,#198482,#198483); +#198481 = CARTESIAN_POINT('',(145.00000014059,-78.4999998594,1.545)); +#198482 = DIRECTION('',(0.,0.,-1.)); +#198483 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#198484 = ORIENTED_EDGE('',*,*,#198485,.F.); +#198485 = EDGE_CURVE('',#198486,#198477,#198488,.T.); +#198486 = VERTEX_POINT('',#198487); +#198487 = CARTESIAN_POINT('',(145.114805,-78.222836,1.51)); +#198488 = LINE('',#198489,#198490); +#198489 = CARTESIAN_POINT('',(145.114805,-78.222836,1.51)); +#198490 = VECTOR('',#198491,1.); +#198491 = DIRECTION('',(0.,0.,1.)); +#198492 = ORIENTED_EDGE('',*,*,#198493,.F.); +#198493 = EDGE_CURVE('',#198454,#198486,#198494,.T.); +#198494 = CIRCLE('',#198495,0.299999934501); +#198495 = AXIS2_PLACEMENT_3D('',#198496,#198497,#198498); +#198496 = CARTESIAN_POINT('',(145.00000014059,-78.4999998594,1.51)); +#198497 = DIRECTION('',(0.,0.,-1.)); +#198498 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#198499 = CYLINDRICAL_SURFACE('',#198500,0.299999934501); +#198500 = AXIS2_PLACEMENT_3D('',#198501,#198502,#198503); +#198501 = CARTESIAN_POINT('',(145.00000014059,-78.4999998594,1.51)); +#198502 = DIRECTION('',(0.,0.,-1.)); +#198503 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#198504 = ADVANCED_FACE('',(#198505),#198530,.T.); +#198505 = FACE_BOUND('',#198506,.T.); +#198506 = EDGE_LOOP('',(#198507,#198508,#198516,#198524)); +#198507 = ORIENTED_EDGE('',*,*,#198485,.T.); +#198508 = ORIENTED_EDGE('',*,*,#198509,.T.); +#198509 = EDGE_CURVE('',#198477,#198510,#198512,.T.); +#198510 = VERTEX_POINT('',#198511); +#198511 = CARTESIAN_POINT('',(145.128078,-78.230499,1.545)); +#198512 = LINE('',#198513,#198514); +#198513 = CARTESIAN_POINT('',(145.114805,-78.222836,1.545)); +#198514 = VECTOR('',#198515,1.); +#198515 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#198516 = ORIENTED_EDGE('',*,*,#198517,.F.); +#198517 = EDGE_CURVE('',#198518,#198510,#198520,.T.); +#198518 = VERTEX_POINT('',#198519); +#198519 = CARTESIAN_POINT('',(145.128078,-78.230499,1.51)); +#198520 = LINE('',#198521,#198522); +#198521 = CARTESIAN_POINT('',(145.128078,-78.230499,1.51)); +#198522 = VECTOR('',#198523,1.); +#198523 = DIRECTION('',(0.,0.,1.)); +#198524 = ORIENTED_EDGE('',*,*,#198525,.F.); +#198525 = EDGE_CURVE('',#198486,#198518,#198526,.T.); +#198526 = LINE('',#198527,#198528); +#198527 = CARTESIAN_POINT('',(145.114805,-78.222836,1.51)); +#198528 = VECTOR('',#198529,1.); +#198529 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#198530 = PLANE('',#198531); +#198531 = AXIS2_PLACEMENT_3D('',#198532,#198533,#198534); +#198532 = CARTESIAN_POINT('',(145.114805,-78.222836,1.51)); +#198533 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#198534 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#198535 = ADVANCED_FACE('',(#198536),#198552,.T.); +#198536 = FACE_BOUND('',#198537,.T.); +#198537 = EDGE_LOOP('',(#198538,#198539,#198545,#198546)); +#198538 = ORIENTED_EDGE('',*,*,#198517,.T.); +#198539 = ORIENTED_EDGE('',*,*,#198540,.T.); +#198540 = EDGE_CURVE('',#198510,#198281,#198541,.T.); +#198541 = LINE('',#198542,#198543); +#198542 = CARTESIAN_POINT('',(145.128078,-78.230499,1.545)); +#198543 = VECTOR('',#198544,1.); +#198544 = DIRECTION('',(0.70810188434,0.706110275661,0.)); +#198545 = ORIENTED_EDGE('',*,*,#198278,.F.); +#198546 = ORIENTED_EDGE('',*,*,#198547,.F.); +#198547 = EDGE_CURVE('',#198518,#198279,#198548,.T.); +#198548 = LINE('',#198549,#198550); +#198549 = CARTESIAN_POINT('',(145.128078,-78.230499,1.51)); +#198550 = VECTOR('',#198551,1.); +#198551 = DIRECTION('',(0.70810188434,0.706110275661,0.)); +#198552 = PLANE('',#198553); +#198553 = AXIS2_PLACEMENT_3D('',#198554,#198555,#198556); +#198554 = CARTESIAN_POINT('',(145.128078,-78.230499,1.51)); +#198555 = DIRECTION('',(-0.706110275661,0.70810188434,0.)); +#198556 = DIRECTION('',(0.70810188434,0.706110275661,0.)); +#198557 = ADVANCED_FACE('',(#198558),#198585,.F.); +#198558 = FACE_BOUND('',#198559,.T.); +#198559 = EDGE_LOOP('',(#198560,#198570,#198577,#198578)); +#198560 = ORIENTED_EDGE('',*,*,#198561,.T.); +#198561 = EDGE_CURVE('',#198562,#198564,#198566,.T.); +#198562 = VERTEX_POINT('',#198563); +#198563 = CARTESIAN_POINT('',(145.137255,-78.5,1.51)); +#198564 = VERTEX_POINT('',#198565); +#198565 = CARTESIAN_POINT('',(145.137255,-78.5,1.545)); +#198566 = LINE('',#198567,#198568); +#198567 = CARTESIAN_POINT('',(145.137255,-78.5,1.51)); +#198568 = VECTOR('',#198569,1.); +#198569 = DIRECTION('',(0.,0.,1.)); +#198570 = ORIENTED_EDGE('',*,*,#198571,.T.); +#198571 = EDGE_CURVE('',#198564,#198564,#198572,.T.); +#198572 = CIRCLE('',#198573,0.137255); +#198573 = AXIS2_PLACEMENT_3D('',#198574,#198575,#198576); +#198574 = CARTESIAN_POINT('',(145.,-78.5,1.545)); +#198575 = DIRECTION('',(0.,0.,1.)); +#198576 = DIRECTION('',(1.,0.,-0.)); +#198577 = ORIENTED_EDGE('',*,*,#198561,.F.); +#198578 = ORIENTED_EDGE('',*,*,#198579,.F.); +#198579 = EDGE_CURVE('',#198562,#198562,#198580,.T.); +#198580 = CIRCLE('',#198581,0.137255); +#198581 = AXIS2_PLACEMENT_3D('',#198582,#198583,#198584); +#198582 = CARTESIAN_POINT('',(145.,-78.5,1.51)); +#198583 = DIRECTION('',(0.,0.,1.)); +#198584 = DIRECTION('',(1.,0.,-0.)); +#198585 = CYLINDRICAL_SURFACE('',#198586,0.137255); +#198586 = AXIS2_PLACEMENT_3D('',#198587,#198588,#198589); +#198587 = CARTESIAN_POINT('',(145.,-78.5,1.51)); +#198588 = DIRECTION('',(-0.,-0.,-1.)); +#198589 = DIRECTION('',(1.,0.,-0.)); +#198590 = ADVANCED_FACE('',(#198591,#198602),#198605,.F.); +#198591 = FACE_BOUND('',#198592,.T.); +#198592 = EDGE_LOOP('',(#198593,#198594,#198595,#198596,#198597,#198598, + #198599,#198600,#198601)); +#198593 = ORIENTED_EDGE('',*,*,#198304,.T.); +#198594 = ORIENTED_EDGE('',*,*,#198335,.T.); +#198595 = ORIENTED_EDGE('',*,*,#198367,.T.); +#198596 = ORIENTED_EDGE('',*,*,#198399,.T.); +#198597 = ORIENTED_EDGE('',*,*,#198430,.T.); +#198598 = ORIENTED_EDGE('',*,*,#198461,.T.); +#198599 = ORIENTED_EDGE('',*,*,#198493,.T.); +#198600 = ORIENTED_EDGE('',*,*,#198525,.T.); +#198601 = ORIENTED_EDGE('',*,*,#198547,.T.); +#198602 = FACE_BOUND('',#198603,.T.); +#198603 = EDGE_LOOP('',(#198604)); +#198604 = ORIENTED_EDGE('',*,*,#198579,.T.); +#198605 = PLANE('',#198606); +#198606 = AXIS2_PLACEMENT_3D('',#198607,#198608,#198609); +#198607 = CARTESIAN_POINT('',(0.,0.,1.51)); +#198608 = DIRECTION('',(0.,0.,1.)); +#198609 = DIRECTION('',(1.,0.,-0.)); +#198610 = ADVANCED_FACE('',(#198611,#198622),#198625,.T.); +#198611 = FACE_BOUND('',#198612,.F.); +#198612 = EDGE_LOOP('',(#198613,#198614,#198615,#198616,#198617,#198618, + #198619,#198620,#198621)); +#198613 = ORIENTED_EDGE('',*,*,#198288,.T.); +#198614 = ORIENTED_EDGE('',*,*,#198319,.T.); +#198615 = ORIENTED_EDGE('',*,*,#198350,.T.); +#198616 = ORIENTED_EDGE('',*,*,#198383,.T.); +#198617 = ORIENTED_EDGE('',*,*,#198414,.T.); +#198618 = ORIENTED_EDGE('',*,*,#198445,.T.); +#198619 = ORIENTED_EDGE('',*,*,#198476,.T.); +#198620 = ORIENTED_EDGE('',*,*,#198509,.T.); +#198621 = ORIENTED_EDGE('',*,*,#198540,.T.); +#198622 = FACE_BOUND('',#198623,.F.); +#198623 = EDGE_LOOP('',(#198624)); +#198624 = ORIENTED_EDGE('',*,*,#198571,.T.); +#198625 = PLANE('',#198626); +#198626 = AXIS2_PLACEMENT_3D('',#198627,#198628,#198629); +#198627 = CARTESIAN_POINT('',(0.,0.,1.545)); +#198628 = DIRECTION('',(0.,0.,1.)); +#198629 = DIRECTION('',(1.,0.,-0.)); +#198630 = MANIFOLD_SOLID_BREP('',#198631); +#198631 = CLOSED_SHELL('',(#198632,#198672,#198703,#198734,#198765, + #198796,#198829,#198860,#198891,#198922,#198953,#198984,#199015, + #199046,#199079,#199110,#199141,#199172,#199194,#199227,#199260, + #199292)); +#198632 = ADVANCED_FACE('',(#198633),#198667,.F.); +#198633 = FACE_BOUND('',#198634,.F.); +#198634 = EDGE_LOOP('',(#198635,#198645,#198653,#198661)); +#198635 = ORIENTED_EDGE('',*,*,#198636,.T.); +#198636 = EDGE_CURVE('',#198637,#198639,#198641,.T.); +#198637 = VERTEX_POINT('',#198638); +#198638 = CARTESIAN_POINT('',(134.319443,-114.991853,0.)); +#198639 = VERTEX_POINT('',#198640); +#198640 = CARTESIAN_POINT('',(134.319443,-114.991853,-3.5E-02)); +#198641 = LINE('',#198642,#198643); +#198642 = CARTESIAN_POINT('',(134.319443,-114.991853,0.)); +#198643 = VECTOR('',#198644,1.); +#198644 = DIRECTION('',(0.,0.,-1.)); +#198645 = ORIENTED_EDGE('',*,*,#198646,.T.); +#198646 = EDGE_CURVE('',#198639,#198647,#198649,.T.); +#198647 = VERTEX_POINT('',#198648); +#198648 = CARTESIAN_POINT('',(134.355491,-114.976921,-3.5E-02)); +#198649 = LINE('',#198650,#198651); +#198650 = CARTESIAN_POINT('',(134.319443,-114.991853,-3.5E-02)); +#198651 = VECTOR('',#198652,1.); +#198652 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#198653 = ORIENTED_EDGE('',*,*,#198654,.F.); +#198654 = EDGE_CURVE('',#198655,#198647,#198657,.T.); +#198655 = VERTEX_POINT('',#198656); +#198656 = CARTESIAN_POINT('',(134.355491,-114.976921,0.)); +#198657 = LINE('',#198658,#198659); +#198658 = CARTESIAN_POINT('',(134.355491,-114.976921,0.)); +#198659 = VECTOR('',#198660,1.); +#198660 = DIRECTION('',(0.,0.,-1.)); +#198661 = ORIENTED_EDGE('',*,*,#198662,.F.); +#198662 = EDGE_CURVE('',#198637,#198655,#198663,.T.); +#198663 = LINE('',#198664,#198665); +#198664 = CARTESIAN_POINT('',(134.319443,-114.991853,0.)); +#198665 = VECTOR('',#198666,1.); +#198666 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#198667 = PLANE('',#198668); +#198668 = AXIS2_PLACEMENT_3D('',#198669,#198670,#198671); +#198669 = CARTESIAN_POINT('',(134.319443,-114.991853,0.)); +#198670 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#198671 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#198672 = ADVANCED_FACE('',(#198673),#198698,.F.); +#198673 = FACE_BOUND('',#198674,.F.); +#198674 = EDGE_LOOP('',(#198675,#198676,#198684,#198692)); +#198675 = ORIENTED_EDGE('',*,*,#198654,.T.); +#198676 = ORIENTED_EDGE('',*,*,#198677,.T.); +#198677 = EDGE_CURVE('',#198647,#198678,#198680,.T.); +#198678 = VERTEX_POINT('',#198679); +#198679 = CARTESIAN_POINT('',(140.967303,-114.976921,-3.5E-02)); +#198680 = LINE('',#198681,#198682); +#198681 = CARTESIAN_POINT('',(134.355491,-114.976921,-3.5E-02)); +#198682 = VECTOR('',#198683,1.); +#198683 = DIRECTION('',(1.,0.,0.)); +#198684 = ORIENTED_EDGE('',*,*,#198685,.F.); +#198685 = EDGE_CURVE('',#198686,#198678,#198688,.T.); +#198686 = VERTEX_POINT('',#198687); +#198687 = CARTESIAN_POINT('',(140.967303,-114.976921,0.)); +#198688 = LINE('',#198689,#198690); +#198689 = CARTESIAN_POINT('',(140.967303,-114.976921,0.)); +#198690 = VECTOR('',#198691,1.); +#198691 = DIRECTION('',(0.,0.,-1.)); +#198692 = ORIENTED_EDGE('',*,*,#198693,.F.); +#198693 = EDGE_CURVE('',#198655,#198686,#198694,.T.); +#198694 = LINE('',#198695,#198696); +#198695 = CARTESIAN_POINT('',(134.355491,-114.976921,0.)); +#198696 = VECTOR('',#198697,1.); +#198697 = DIRECTION('',(1.,0.,0.)); +#198698 = PLANE('',#198699); +#198699 = AXIS2_PLACEMENT_3D('',#198700,#198701,#198702); +#198700 = CARTESIAN_POINT('',(134.355491,-114.976921,0.)); +#198701 = DIRECTION('',(0.,-1.,0.)); +#198702 = DIRECTION('',(1.,0.,0.)); +#198703 = ADVANCED_FACE('',(#198704),#198729,.F.); +#198704 = FACE_BOUND('',#198705,.F.); +#198705 = EDGE_LOOP('',(#198706,#198707,#198715,#198723)); +#198706 = ORIENTED_EDGE('',*,*,#198685,.T.); +#198707 = ORIENTED_EDGE('',*,*,#198708,.T.); +#198708 = EDGE_CURVE('',#198678,#198709,#198711,.T.); +#198709 = VERTEX_POINT('',#198710); +#198710 = CARTESIAN_POINT('',(141.003351,-114.991853,-3.5E-02)); +#198711 = LINE('',#198712,#198713); +#198712 = CARTESIAN_POINT('',(140.967303,-114.976921,-3.5E-02)); +#198713 = VECTOR('',#198714,1.); +#198714 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#198715 = ORIENTED_EDGE('',*,*,#198716,.F.); +#198716 = EDGE_CURVE('',#198717,#198709,#198719,.T.); +#198717 = VERTEX_POINT('',#198718); +#198718 = CARTESIAN_POINT('',(141.003351,-114.991853,0.)); +#198719 = LINE('',#198720,#198721); +#198720 = CARTESIAN_POINT('',(141.003351,-114.991853,0.)); +#198721 = VECTOR('',#198722,1.); +#198722 = DIRECTION('',(0.,0.,-1.)); +#198723 = ORIENTED_EDGE('',*,*,#198724,.F.); +#198724 = EDGE_CURVE('',#198686,#198717,#198725,.T.); +#198725 = LINE('',#198726,#198727); +#198726 = CARTESIAN_POINT('',(140.967303,-114.976921,0.)); +#198727 = VECTOR('',#198728,1.); +#198728 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#198729 = PLANE('',#198730); +#198730 = AXIS2_PLACEMENT_3D('',#198731,#198732,#198733); +#198731 = CARTESIAN_POINT('',(140.967303,-114.976921,0.)); +#198732 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#198733 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#198734 = ADVANCED_FACE('',(#198735),#198760,.F.); +#198735 = FACE_BOUND('',#198736,.F.); +#198736 = EDGE_LOOP('',(#198737,#198738,#198746,#198754)); +#198737 = ORIENTED_EDGE('',*,*,#198716,.T.); +#198738 = ORIENTED_EDGE('',*,*,#198739,.T.); +#198739 = EDGE_CURVE('',#198709,#198740,#198742,.T.); +#198740 = VERTEX_POINT('',#198741); +#198741 = CARTESIAN_POINT('',(141.246423,-115.232207,-3.5E-02)); +#198742 = LINE('',#198743,#198744); +#198743 = CARTESIAN_POINT('',(141.003351,-114.991853,-3.5E-02)); +#198744 = VECTOR('',#198745,1.); +#198745 = DIRECTION('',(0.711071158611,-0.703120051906,0.)); +#198746 = ORIENTED_EDGE('',*,*,#198747,.F.); +#198747 = EDGE_CURVE('',#198748,#198740,#198750,.T.); +#198748 = VERTEX_POINT('',#198749); +#198749 = CARTESIAN_POINT('',(141.246423,-115.232207,0.)); +#198750 = LINE('',#198751,#198752); +#198751 = CARTESIAN_POINT('',(141.246423,-115.232207,0.)); +#198752 = VECTOR('',#198753,1.); +#198753 = DIRECTION('',(0.,0.,-1.)); +#198754 = ORIENTED_EDGE('',*,*,#198755,.F.); +#198755 = EDGE_CURVE('',#198717,#198748,#198756,.T.); +#198756 = LINE('',#198757,#198758); +#198757 = CARTESIAN_POINT('',(141.003351,-114.991853,0.)); +#198758 = VECTOR('',#198759,1.); +#198759 = DIRECTION('',(0.711071158611,-0.703120051906,0.)); +#198760 = PLANE('',#198761); +#198761 = AXIS2_PLACEMENT_3D('',#198762,#198763,#198764); +#198762 = CARTESIAN_POINT('',(141.003351,-114.991853,0.)); +#198763 = DIRECTION('',(-0.703120051906,-0.711071158611,-0.)); +#198764 = DIRECTION('',(0.711071158611,-0.703120051906,0.)); +#198765 = ADVANCED_FACE('',(#198766),#198791,.F.); +#198766 = FACE_BOUND('',#198767,.F.); +#198767 = EDGE_LOOP('',(#198768,#198769,#198777,#198785)); +#198768 = ORIENTED_EDGE('',*,*,#198747,.T.); +#198769 = ORIENTED_EDGE('',*,*,#198770,.T.); +#198770 = EDGE_CURVE('',#198740,#198771,#198773,.T.); +#198771 = VERTEX_POINT('',#198772); +#198772 = CARTESIAN_POINT('',(141.261994,-115.20524,-3.5E-02)); +#198773 = LINE('',#198774,#198775); +#198774 = CARTESIAN_POINT('',(141.246423,-115.232207,-3.5E-02)); +#198775 = VECTOR('',#198776,1.); +#198776 = DIRECTION('',(0.500038422217,0.866003219571,0.)); +#198777 = ORIENTED_EDGE('',*,*,#198778,.F.); +#198778 = EDGE_CURVE('',#198779,#198771,#198781,.T.); +#198779 = VERTEX_POINT('',#198780); +#198780 = CARTESIAN_POINT('',(141.261994,-115.20524,0.)); +#198781 = LINE('',#198782,#198783); +#198782 = CARTESIAN_POINT('',(141.261994,-115.20524,0.)); +#198783 = VECTOR('',#198784,1.); +#198784 = DIRECTION('',(0.,0.,-1.)); +#198785 = ORIENTED_EDGE('',*,*,#198786,.F.); +#198786 = EDGE_CURVE('',#198748,#198779,#198787,.T.); +#198787 = LINE('',#198788,#198789); +#198788 = CARTESIAN_POINT('',(141.246423,-115.232207,0.)); +#198789 = VECTOR('',#198790,1.); +#198790 = DIRECTION('',(0.500038422217,0.866003219571,0.)); +#198791 = PLANE('',#198792); +#198792 = AXIS2_PLACEMENT_3D('',#198793,#198794,#198795); +#198793 = CARTESIAN_POINT('',(141.246423,-115.232207,0.)); +#198794 = DIRECTION('',(0.866003219571,-0.500038422217,0.)); +#198795 = DIRECTION('',(0.500038422217,0.866003219571,0.)); +#198796 = ADVANCED_FACE('',(#198797),#198824,.T.); +#198797 = FACE_BOUND('',#198798,.F.); +#198798 = EDGE_LOOP('',(#198799,#198800,#198809,#198817)); +#198799 = ORIENTED_EDGE('',*,*,#198778,.T.); +#198800 = ORIENTED_EDGE('',*,*,#198801,.T.); +#198801 = EDGE_CURVE('',#198771,#198802,#198804,.T.); +#198802 = VERTEX_POINT('',#198803); +#198803 = CARTESIAN_POINT('',(141.222836,-115.502673,-3.5E-02)); +#198804 = CIRCLE('',#198805,0.299999758992); +#198805 = AXIS2_PLACEMENT_3D('',#198806,#198807,#198808); +#198806 = CARTESIAN_POINT('',(141.49999975705,-115.3878683521,-3.5E-02) + ); +#198807 = DIRECTION('',(0.,0.,-1.)); +#198808 = DIRECTION('',(-0.793353160862,0.608761662845,-0.)); +#198809 = ORIENTED_EDGE('',*,*,#198810,.F.); +#198810 = EDGE_CURVE('',#198811,#198802,#198813,.T.); +#198811 = VERTEX_POINT('',#198812); +#198812 = CARTESIAN_POINT('',(141.222836,-115.502673,0.)); +#198813 = LINE('',#198814,#198815); +#198814 = CARTESIAN_POINT('',(141.222836,-115.502673,0.)); +#198815 = VECTOR('',#198816,1.); +#198816 = DIRECTION('',(0.,0.,-1.)); +#198817 = ORIENTED_EDGE('',*,*,#198818,.F.); +#198818 = EDGE_CURVE('',#198779,#198811,#198819,.T.); +#198819 = CIRCLE('',#198820,0.299999758992); +#198820 = AXIS2_PLACEMENT_3D('',#198821,#198822,#198823); +#198821 = CARTESIAN_POINT('',(141.49999975705,-115.3878683521,0.)); +#198822 = DIRECTION('',(0.,0.,-1.)); +#198823 = DIRECTION('',(-0.793353160862,0.608761662845,-0.)); +#198824 = CYLINDRICAL_SURFACE('',#198825,0.299999758992); +#198825 = AXIS2_PLACEMENT_3D('',#198826,#198827,#198828); +#198826 = CARTESIAN_POINT('',(141.49999975705,-115.3878683521,0.)); +#198827 = DIRECTION('',(-0.,-0.,1.)); +#198828 = DIRECTION('',(-0.793353160862,0.608761662845,-0.)); +#198829 = ADVANCED_FACE('',(#198830),#198855,.F.); +#198830 = FACE_BOUND('',#198831,.F.); +#198831 = EDGE_LOOP('',(#198832,#198833,#198841,#198849)); +#198832 = ORIENTED_EDGE('',*,*,#198810,.T.); +#198833 = ORIENTED_EDGE('',*,*,#198834,.T.); +#198834 = EDGE_CURVE('',#198802,#198835,#198837,.T.); +#198835 = VERTEX_POINT('',#198836); +#198836 = CARTESIAN_POINT('',(141.215508,-115.475324,-3.5E-02)); +#198837 = LINE('',#198838,#198839); +#198838 = CARTESIAN_POINT('',(141.222836,-115.502673,-3.5E-02)); +#198839 = VECTOR('',#198840,1.); +#198840 = DIRECTION('',(-0.258814350539,0.965927084181,0.)); +#198841 = ORIENTED_EDGE('',*,*,#198842,.F.); +#198842 = EDGE_CURVE('',#198843,#198835,#198845,.T.); +#198843 = VERTEX_POINT('',#198844); +#198844 = CARTESIAN_POINT('',(141.215508,-115.475324,0.)); +#198845 = LINE('',#198846,#198847); +#198846 = CARTESIAN_POINT('',(141.215508,-115.475324,0.)); +#198847 = VECTOR('',#198848,1.); +#198848 = DIRECTION('',(0.,0.,-1.)); +#198849 = ORIENTED_EDGE('',*,*,#198850,.F.); +#198850 = EDGE_CURVE('',#198811,#198843,#198851,.T.); +#198851 = LINE('',#198852,#198853); +#198852 = CARTESIAN_POINT('',(141.222836,-115.502673,0.)); +#198853 = VECTOR('',#198854,1.); +#198854 = DIRECTION('',(-0.258814350539,0.965927084181,0.)); +#198855 = PLANE('',#198856); +#198856 = AXIS2_PLACEMENT_3D('',#198857,#198858,#198859); +#198857 = CARTESIAN_POINT('',(141.222836,-115.502673,0.)); +#198858 = DIRECTION('',(0.965927084181,0.258814350539,0.)); +#198859 = DIRECTION('',(-0.258814350539,0.965927084181,0.)); +#198860 = ADVANCED_FACE('',(#198861),#198886,.F.); +#198861 = FACE_BOUND('',#198862,.F.); +#198862 = EDGE_LOOP('',(#198863,#198864,#198872,#198880)); +#198863 = ORIENTED_EDGE('',*,*,#198842,.T.); +#198864 = ORIENTED_EDGE('',*,*,#198865,.T.); +#198865 = EDGE_CURVE('',#198835,#198866,#198868,.T.); +#198866 = VERTEX_POINT('',#198867); +#198867 = CARTESIAN_POINT('',(141.189951,-115.458579,-3.5E-02)); +#198868 = LINE('',#198869,#198870); +#198869 = CARTESIAN_POINT('',(141.215508,-115.475324,-3.5E-02)); +#198870 = VECTOR('',#198871,1.); +#198871 = DIRECTION('',(-0.836449747839,0.548043629048,0.)); +#198872 = ORIENTED_EDGE('',*,*,#198873,.F.); +#198873 = EDGE_CURVE('',#198874,#198866,#198876,.T.); +#198874 = VERTEX_POINT('',#198875); +#198875 = CARTESIAN_POINT('',(141.189951,-115.458579,0.)); +#198876 = LINE('',#198877,#198878); +#198877 = CARTESIAN_POINT('',(141.189951,-115.458579,0.)); +#198878 = VECTOR('',#198879,1.); +#198879 = DIRECTION('',(0.,0.,-1.)); +#198880 = ORIENTED_EDGE('',*,*,#198881,.F.); +#198881 = EDGE_CURVE('',#198843,#198874,#198882,.T.); +#198882 = LINE('',#198883,#198884); +#198883 = CARTESIAN_POINT('',(141.215508,-115.475324,0.)); +#198884 = VECTOR('',#198885,1.); +#198885 = DIRECTION('',(-0.836449747839,0.548043629048,0.)); +#198886 = PLANE('',#198887); +#198887 = AXIS2_PLACEMENT_3D('',#198888,#198889,#198890); +#198888 = CARTESIAN_POINT('',(141.215508,-115.475324,0.)); +#198889 = DIRECTION('',(0.548043629048,0.836449747839,0.)); +#198890 = DIRECTION('',(-0.836449747839,0.548043629048,0.)); +#198891 = ADVANCED_FACE('',(#198892),#198917,.F.); +#198892 = FACE_BOUND('',#198893,.F.); +#198893 = EDGE_LOOP('',(#198894,#198895,#198903,#198911)); +#198894 = ORIENTED_EDGE('',*,*,#198873,.T.); +#198895 = ORIENTED_EDGE('',*,*,#198896,.T.); +#198896 = EDGE_CURVE('',#198866,#198897,#198899,.T.); +#198897 = VERTEX_POINT('',#198898); +#198898 = CARTESIAN_POINT('',(140.906372,-115.175,-3.5E-02)); +#198899 = LINE('',#198900,#198901); +#198900 = CARTESIAN_POINT('',(141.189951,-115.458579,-3.5E-02)); +#198901 = VECTOR('',#198902,1.); +#198902 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198903 = ORIENTED_EDGE('',*,*,#198904,.F.); +#198904 = EDGE_CURVE('',#198905,#198897,#198907,.T.); +#198905 = VERTEX_POINT('',#198906); +#198906 = CARTESIAN_POINT('',(140.906372,-115.175,0.)); +#198907 = LINE('',#198908,#198909); +#198908 = CARTESIAN_POINT('',(140.906372,-115.175,0.)); +#198909 = VECTOR('',#198910,1.); +#198910 = DIRECTION('',(0.,0.,-1.)); +#198911 = ORIENTED_EDGE('',*,*,#198912,.F.); +#198912 = EDGE_CURVE('',#198874,#198905,#198913,.T.); +#198913 = LINE('',#198914,#198915); +#198914 = CARTESIAN_POINT('',(141.189951,-115.458579,0.)); +#198915 = VECTOR('',#198916,1.); +#198916 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198917 = PLANE('',#198918); +#198918 = AXIS2_PLACEMENT_3D('',#198919,#198920,#198921); +#198919 = CARTESIAN_POINT('',(141.189951,-115.458579,0.)); +#198920 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#198921 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198922 = ADVANCED_FACE('',(#198923),#198948,.F.); +#198923 = FACE_BOUND('',#198924,.F.); +#198924 = EDGE_LOOP('',(#198925,#198926,#198934,#198942)); +#198925 = ORIENTED_EDGE('',*,*,#198904,.T.); +#198926 = ORIENTED_EDGE('',*,*,#198927,.T.); +#198927 = EDGE_CURVE('',#198897,#198928,#198930,.T.); +#198928 = VERTEX_POINT('',#198929); +#198929 = CARTESIAN_POINT('',(134.416422,-115.175,-3.5E-02)); +#198930 = LINE('',#198931,#198932); +#198931 = CARTESIAN_POINT('',(140.906372,-115.175,-3.5E-02)); +#198932 = VECTOR('',#198933,1.); +#198933 = DIRECTION('',(-1.,0.,0.)); +#198934 = ORIENTED_EDGE('',*,*,#198935,.F.); +#198935 = EDGE_CURVE('',#198936,#198928,#198938,.T.); +#198936 = VERTEX_POINT('',#198937); +#198937 = CARTESIAN_POINT('',(134.416422,-115.175,0.)); +#198938 = LINE('',#198939,#198940); +#198939 = CARTESIAN_POINT('',(134.416422,-115.175,0.)); +#198940 = VECTOR('',#198941,1.); +#198941 = DIRECTION('',(0.,0.,-1.)); +#198942 = ORIENTED_EDGE('',*,*,#198943,.F.); +#198943 = EDGE_CURVE('',#198905,#198936,#198944,.T.); +#198944 = LINE('',#198945,#198946); +#198945 = CARTESIAN_POINT('',(140.906372,-115.175,0.)); +#198946 = VECTOR('',#198947,1.); +#198947 = DIRECTION('',(-1.,0.,0.)); +#198948 = PLANE('',#198949); +#198949 = AXIS2_PLACEMENT_3D('',#198950,#198951,#198952); +#198950 = CARTESIAN_POINT('',(140.906372,-115.175,0.)); +#198951 = DIRECTION('',(0.,1.,0.)); +#198952 = DIRECTION('',(-1.,0.,0.)); +#198953 = ADVANCED_FACE('',(#198954),#198979,.F.); +#198954 = FACE_BOUND('',#198955,.F.); +#198955 = EDGE_LOOP('',(#198956,#198957,#198965,#198973)); +#198956 = ORIENTED_EDGE('',*,*,#198935,.T.); +#198957 = ORIENTED_EDGE('',*,*,#198958,.T.); +#198958 = EDGE_CURVE('',#198928,#198959,#198961,.T.); +#198959 = VERTEX_POINT('',#198960); +#198960 = CARTESIAN_POINT('',(133.6,-115.991422,-3.5E-02)); +#198961 = LINE('',#198962,#198963); +#198962 = CARTESIAN_POINT('',(134.416422,-115.175,-3.5E-02)); +#198963 = VECTOR('',#198964,1.); +#198964 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198965 = ORIENTED_EDGE('',*,*,#198966,.F.); +#198966 = EDGE_CURVE('',#198967,#198959,#198969,.T.); +#198967 = VERTEX_POINT('',#198968); +#198968 = CARTESIAN_POINT('',(133.6,-115.991422,0.)); +#198969 = LINE('',#198970,#198971); +#198970 = CARTESIAN_POINT('',(133.6,-115.991422,0.)); +#198971 = VECTOR('',#198972,1.); +#198972 = DIRECTION('',(0.,0.,-1.)); +#198973 = ORIENTED_EDGE('',*,*,#198974,.F.); +#198974 = EDGE_CURVE('',#198936,#198967,#198975,.T.); +#198975 = LINE('',#198976,#198977); +#198976 = CARTESIAN_POINT('',(134.416422,-115.175,0.)); +#198977 = VECTOR('',#198978,1.); +#198978 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198979 = PLANE('',#198980); +#198980 = AXIS2_PLACEMENT_3D('',#198981,#198982,#198983); +#198981 = CARTESIAN_POINT('',(134.416422,-115.175,0.)); +#198982 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#198983 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#198984 = ADVANCED_FACE('',(#198985),#199010,.F.); +#198985 = FACE_BOUND('',#198986,.F.); +#198986 = EDGE_LOOP('',(#198987,#198988,#198996,#199004)); +#198987 = ORIENTED_EDGE('',*,*,#198966,.T.); +#198988 = ORIENTED_EDGE('',*,*,#198989,.T.); +#198989 = EDGE_CURVE('',#198959,#198990,#198992,.T.); +#198990 = VERTEX_POINT('',#198991); +#198991 = CARTESIAN_POINT('',(133.6,-116.118869,-3.5E-02)); +#198992 = LINE('',#198993,#198994); +#198993 = CARTESIAN_POINT('',(133.6,-115.991422,-3.5E-02)); +#198994 = VECTOR('',#198995,1.); +#198995 = DIRECTION('',(0.,-1.,0.)); +#198996 = ORIENTED_EDGE('',*,*,#198997,.F.); +#198997 = EDGE_CURVE('',#198998,#198990,#199000,.T.); +#198998 = VERTEX_POINT('',#198999); +#198999 = CARTESIAN_POINT('',(133.6,-116.118869,0.)); +#199000 = LINE('',#199001,#199002); +#199001 = CARTESIAN_POINT('',(133.6,-116.118869,0.)); +#199002 = VECTOR('',#199003,1.); +#199003 = DIRECTION('',(0.,0.,-1.)); +#199004 = ORIENTED_EDGE('',*,*,#199005,.F.); +#199005 = EDGE_CURVE('',#198967,#198998,#199006,.T.); +#199006 = LINE('',#199007,#199008); +#199007 = CARTESIAN_POINT('',(133.6,-115.991422,0.)); +#199008 = VECTOR('',#199009,1.); +#199009 = DIRECTION('',(0.,-1.,0.)); +#199010 = PLANE('',#199011); +#199011 = AXIS2_PLACEMENT_3D('',#199012,#199013,#199014); +#199012 = CARTESIAN_POINT('',(133.6,-115.991422,0.)); +#199013 = DIRECTION('',(-1.,-0.,-0.)); +#199014 = DIRECTION('',(0.,-1.,0.)); +#199015 = ADVANCED_FACE('',(#199016),#199041,.F.); +#199016 = FACE_BOUND('',#199017,.F.); +#199017 = EDGE_LOOP('',(#199018,#199019,#199027,#199035)); +#199018 = ORIENTED_EDGE('',*,*,#198997,.T.); +#199019 = ORIENTED_EDGE('',*,*,#199020,.T.); +#199020 = EDGE_CURVE('',#198990,#199021,#199023,.T.); +#199021 = VERTEX_POINT('',#199022); +#199022 = CARTESIAN_POINT('',(133.614805,-116.122836,-3.5E-02)); +#199023 = LINE('',#199024,#199025); +#199024 = CARTESIAN_POINT('',(133.6,-116.118869,-3.5E-02)); +#199025 = VECTOR('',#199026,1.); +#199026 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#199027 = ORIENTED_EDGE('',*,*,#199028,.F.); +#199028 = EDGE_CURVE('',#199029,#199021,#199031,.T.); +#199029 = VERTEX_POINT('',#199030); +#199030 = CARTESIAN_POINT('',(133.614805,-116.122836,0.)); +#199031 = LINE('',#199032,#199033); +#199032 = CARTESIAN_POINT('',(133.614805,-116.122836,0.)); +#199033 = VECTOR('',#199034,1.); +#199034 = DIRECTION('',(0.,0.,-1.)); +#199035 = ORIENTED_EDGE('',*,*,#199036,.F.); +#199036 = EDGE_CURVE('',#198998,#199029,#199037,.T.); +#199037 = LINE('',#199038,#199039); +#199038 = CARTESIAN_POINT('',(133.6,-116.118869,0.)); +#199039 = VECTOR('',#199040,1.); +#199040 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#199041 = PLANE('',#199042); +#199042 = AXIS2_PLACEMENT_3D('',#199043,#199044,#199045); +#199043 = CARTESIAN_POINT('',(133.6,-116.118869,0.)); +#199044 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#199045 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#199046 = ADVANCED_FACE('',(#199047),#199074,.T.); +#199047 = FACE_BOUND('',#199048,.F.); +#199048 = EDGE_LOOP('',(#199049,#199050,#199059,#199067)); +#199049 = ORIENTED_EDGE('',*,*,#199028,.T.); +#199050 = ORIENTED_EDGE('',*,*,#199051,.T.); +#199051 = EDGE_CURVE('',#199021,#199052,#199054,.T.); +#199052 = VERTEX_POINT('',#199053); +#199053 = CARTESIAN_POINT('',(133.385195,-116.122836,-3.5E-02)); +#199054 = CIRCLE('',#199055,0.299999850918); +#199055 = AXIS2_PLACEMENT_3D('',#199056,#199057,#199058); +#199056 = CARTESIAN_POINT('',(133.5,-116.3999997106,-3.5E-02)); +#199057 = DIRECTION('',(0.,0.,-1.)); +#199058 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#199059 = ORIENTED_EDGE('',*,*,#199060,.F.); +#199060 = EDGE_CURVE('',#199061,#199052,#199063,.T.); +#199061 = VERTEX_POINT('',#199062); +#199062 = CARTESIAN_POINT('',(133.385195,-116.122836,0.)); +#199063 = LINE('',#199064,#199065); +#199064 = CARTESIAN_POINT('',(133.385195,-116.122836,0.)); +#199065 = VECTOR('',#199066,1.); +#199066 = DIRECTION('',(0.,0.,-1.)); +#199067 = ORIENTED_EDGE('',*,*,#199068,.F.); +#199068 = EDGE_CURVE('',#199029,#199061,#199069,.T.); +#199069 = CIRCLE('',#199070,0.299999850918); +#199070 = AXIS2_PLACEMENT_3D('',#199071,#199072,#199073); +#199071 = CARTESIAN_POINT('',(133.5,-116.3999997106,0.)); +#199072 = DIRECTION('',(0.,0.,-1.)); +#199073 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#199074 = CYLINDRICAL_SURFACE('',#199075,0.299999850918); +#199075 = AXIS2_PLACEMENT_3D('',#199076,#199077,#199078); +#199076 = CARTESIAN_POINT('',(133.5,-116.3999997106,0.)); +#199077 = DIRECTION('',(-0.,-0.,1.)); +#199078 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#199079 = ADVANCED_FACE('',(#199080),#199105,.F.); +#199080 = FACE_BOUND('',#199081,.F.); +#199081 = EDGE_LOOP('',(#199082,#199083,#199091,#199099)); +#199082 = ORIENTED_EDGE('',*,*,#199060,.T.); +#199083 = ORIENTED_EDGE('',*,*,#199084,.T.); +#199084 = EDGE_CURVE('',#199052,#199085,#199087,.T.); +#199085 = VERTEX_POINT('',#199086); +#199086 = CARTESIAN_POINT('',(133.4,-116.118869,-3.5E-02)); +#199087 = LINE('',#199088,#199089); +#199088 = CARTESIAN_POINT('',(133.385195,-116.122836,-3.5E-02)); +#199089 = VECTOR('',#199090,1.); +#199090 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#199091 = ORIENTED_EDGE('',*,*,#199092,.F.); +#199092 = EDGE_CURVE('',#199093,#199085,#199095,.T.); +#199093 = VERTEX_POINT('',#199094); +#199094 = CARTESIAN_POINT('',(133.4,-116.118869,0.)); +#199095 = LINE('',#199096,#199097); +#199096 = CARTESIAN_POINT('',(133.4,-116.118869,0.)); +#199097 = VECTOR('',#199098,1.); +#199098 = DIRECTION('',(0.,0.,-1.)); +#199099 = ORIENTED_EDGE('',*,*,#199100,.F.); +#199100 = EDGE_CURVE('',#199061,#199093,#199101,.T.); +#199101 = LINE('',#199102,#199103); +#199102 = CARTESIAN_POINT('',(133.385195,-116.122836,0.)); +#199103 = VECTOR('',#199104,1.); +#199104 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#199105 = PLANE('',#199106); +#199106 = AXIS2_PLACEMENT_3D('',#199107,#199108,#199109); +#199107 = CARTESIAN_POINT('',(133.385195,-116.122836,0.)); +#199108 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#199109 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#199110 = ADVANCED_FACE('',(#199111),#199136,.F.); +#199111 = FACE_BOUND('',#199112,.F.); +#199112 = EDGE_LOOP('',(#199113,#199114,#199122,#199130)); +#199113 = ORIENTED_EDGE('',*,*,#199092,.T.); +#199114 = ORIENTED_EDGE('',*,*,#199115,.T.); +#199115 = EDGE_CURVE('',#199085,#199116,#199118,.T.); +#199116 = VERTEX_POINT('',#199117); +#199117 = CARTESIAN_POINT('',(133.401921,-115.930491,-3.5E-02)); +#199118 = LINE('',#199119,#199120); +#199119 = CARTESIAN_POINT('',(133.4,-116.118869,-3.5E-02)); +#199120 = VECTOR('',#199121,1.); +#199121 = DIRECTION('',(1.019705127316E-02,0.999948008721,0.)); +#199122 = ORIENTED_EDGE('',*,*,#199123,.F.); +#199123 = EDGE_CURVE('',#199124,#199116,#199126,.T.); +#199124 = VERTEX_POINT('',#199125); +#199125 = CARTESIAN_POINT('',(133.401921,-115.930491,0.)); +#199126 = LINE('',#199127,#199128); +#199127 = CARTESIAN_POINT('',(133.401921,-115.930491,0.)); +#199128 = VECTOR('',#199129,1.); +#199129 = DIRECTION('',(0.,0.,-1.)); +#199130 = ORIENTED_EDGE('',*,*,#199131,.F.); +#199131 = EDGE_CURVE('',#199093,#199124,#199132,.T.); +#199132 = LINE('',#199133,#199134); +#199133 = CARTESIAN_POINT('',(133.4,-116.118869,0.)); +#199134 = VECTOR('',#199135,1.); +#199135 = DIRECTION('',(1.019705127316E-02,0.999948008721,0.)); +#199136 = PLANE('',#199137); +#199137 = AXIS2_PLACEMENT_3D('',#199138,#199139,#199140); +#199138 = CARTESIAN_POINT('',(133.4,-116.118869,0.)); +#199139 = DIRECTION('',(0.999948008721,-1.019705127316E-02,0.)); +#199140 = DIRECTION('',(1.019705127316E-02,0.999948008721,0.)); +#199141 = ADVANCED_FACE('',(#199142),#199167,.F.); +#199142 = FACE_BOUND('',#199143,.F.); +#199143 = EDGE_LOOP('',(#199144,#199145,#199153,#199161)); +#199144 = ORIENTED_EDGE('',*,*,#199123,.T.); +#199145 = ORIENTED_EDGE('',*,*,#199146,.T.); +#199146 = EDGE_CURVE('',#199116,#199147,#199149,.T.); +#199147 = VERTEX_POINT('',#199148); +#199148 = CARTESIAN_POINT('',(133.416853,-115.894443,-3.5E-02)); +#199149 = LINE('',#199150,#199151); +#199150 = CARTESIAN_POINT('',(133.401921,-115.930491,-3.5E-02)); +#199151 = VECTOR('',#199152,1.); +#199152 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199153 = ORIENTED_EDGE('',*,*,#199154,.F.); +#199154 = EDGE_CURVE('',#199155,#199147,#199157,.T.); +#199155 = VERTEX_POINT('',#199156); +#199156 = CARTESIAN_POINT('',(133.416853,-115.894443,0.)); +#199157 = LINE('',#199158,#199159); +#199158 = CARTESIAN_POINT('',(133.416853,-115.894443,0.)); +#199159 = VECTOR('',#199160,1.); +#199160 = DIRECTION('',(0.,0.,-1.)); +#199161 = ORIENTED_EDGE('',*,*,#199162,.F.); +#199162 = EDGE_CURVE('',#199124,#199155,#199163,.T.); +#199163 = LINE('',#199164,#199165); +#199164 = CARTESIAN_POINT('',(133.401921,-115.930491,0.)); +#199165 = VECTOR('',#199166,1.); +#199166 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199167 = PLANE('',#199168); +#199168 = AXIS2_PLACEMENT_3D('',#199169,#199170,#199171); +#199169 = CARTESIAN_POINT('',(133.401921,-115.930491,0.)); +#199170 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#199171 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199172 = ADVANCED_FACE('',(#199173),#199189,.F.); +#199173 = FACE_BOUND('',#199174,.F.); +#199174 = EDGE_LOOP('',(#199175,#199176,#199182,#199183)); +#199175 = ORIENTED_EDGE('',*,*,#199154,.T.); +#199176 = ORIENTED_EDGE('',*,*,#199177,.T.); +#199177 = EDGE_CURVE('',#199147,#198639,#199178,.T.); +#199178 = LINE('',#199179,#199180); +#199179 = CARTESIAN_POINT('',(133.416853,-115.894443,-3.5E-02)); +#199180 = VECTOR('',#199181,1.); +#199181 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#199182 = ORIENTED_EDGE('',*,*,#198636,.F.); +#199183 = ORIENTED_EDGE('',*,*,#199184,.F.); +#199184 = EDGE_CURVE('',#199155,#198637,#199185,.T.); +#199185 = LINE('',#199186,#199187); +#199186 = CARTESIAN_POINT('',(133.416853,-115.894443,0.)); +#199187 = VECTOR('',#199188,1.); +#199188 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#199189 = PLANE('',#199190); +#199190 = AXIS2_PLACEMENT_3D('',#199191,#199192,#199193); +#199191 = CARTESIAN_POINT('',(133.416853,-115.894443,0.)); +#199192 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#199193 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#199194 = ADVANCED_FACE('',(#199195),#199222,.F.); +#199195 = FACE_BOUND('',#199196,.F.); +#199196 = EDGE_LOOP('',(#199197,#199207,#199214,#199215)); +#199197 = ORIENTED_EDGE('',*,*,#199198,.T.); +#199198 = EDGE_CURVE('',#199199,#199201,#199203,.T.); +#199199 = VERTEX_POINT('',#199200); +#199200 = CARTESIAN_POINT('',(133.637255,-116.4,0.)); +#199201 = VERTEX_POINT('',#199202); +#199202 = CARTESIAN_POINT('',(133.637255,-116.4,-3.5E-02)); +#199203 = LINE('',#199204,#199205); +#199204 = CARTESIAN_POINT('',(133.637255,-116.4,0.)); +#199205 = VECTOR('',#199206,1.); +#199206 = DIRECTION('',(0.,0.,-1.)); +#199207 = ORIENTED_EDGE('',*,*,#199208,.T.); +#199208 = EDGE_CURVE('',#199201,#199201,#199209,.T.); +#199209 = CIRCLE('',#199210,0.137255); +#199210 = AXIS2_PLACEMENT_3D('',#199211,#199212,#199213); +#199211 = CARTESIAN_POINT('',(133.5,-116.4,-3.5E-02)); +#199212 = DIRECTION('',(0.,0.,1.)); +#199213 = DIRECTION('',(1.,0.,-0.)); +#199214 = ORIENTED_EDGE('',*,*,#199198,.F.); +#199215 = ORIENTED_EDGE('',*,*,#199216,.F.); +#199216 = EDGE_CURVE('',#199199,#199199,#199217,.T.); +#199217 = CIRCLE('',#199218,0.137255); +#199218 = AXIS2_PLACEMENT_3D('',#199219,#199220,#199221); +#199219 = CARTESIAN_POINT('',(133.5,-116.4,0.)); +#199220 = DIRECTION('',(0.,0.,1.)); +#199221 = DIRECTION('',(1.,0.,-0.)); +#199222 = CYLINDRICAL_SURFACE('',#199223,0.137255); +#199223 = AXIS2_PLACEMENT_3D('',#199224,#199225,#199226); +#199224 = CARTESIAN_POINT('',(133.5,-116.4,0.)); +#199225 = DIRECTION('',(0.,0.,1.)); +#199226 = DIRECTION('',(1.,0.,-0.)); +#199227 = ADVANCED_FACE('',(#199228),#199255,.F.); +#199228 = FACE_BOUND('',#199229,.F.); +#199229 = EDGE_LOOP('',(#199230,#199240,#199247,#199248)); +#199230 = ORIENTED_EDGE('',*,*,#199231,.T.); +#199231 = EDGE_CURVE('',#199232,#199234,#199236,.T.); +#199232 = VERTEX_POINT('',#199233); +#199233 = CARTESIAN_POINT('',(141.637255,-115.387868,0.)); +#199234 = VERTEX_POINT('',#199235); +#199235 = CARTESIAN_POINT('',(141.637255,-115.387868,-3.5E-02)); +#199236 = LINE('',#199237,#199238); +#199237 = CARTESIAN_POINT('',(141.637255,-115.387868,0.)); +#199238 = VECTOR('',#199239,1.); +#199239 = DIRECTION('',(0.,0.,-1.)); +#199240 = ORIENTED_EDGE('',*,*,#199241,.T.); +#199241 = EDGE_CURVE('',#199234,#199234,#199242,.T.); +#199242 = CIRCLE('',#199243,0.137255); +#199243 = AXIS2_PLACEMENT_3D('',#199244,#199245,#199246); +#199244 = CARTESIAN_POINT('',(141.5,-115.387868,-3.5E-02)); +#199245 = DIRECTION('',(0.,0.,1.)); +#199246 = DIRECTION('',(1.,0.,-0.)); +#199247 = ORIENTED_EDGE('',*,*,#199231,.F.); +#199248 = ORIENTED_EDGE('',*,*,#199249,.F.); +#199249 = EDGE_CURVE('',#199232,#199232,#199250,.T.); +#199250 = CIRCLE('',#199251,0.137255); +#199251 = AXIS2_PLACEMENT_3D('',#199252,#199253,#199254); +#199252 = CARTESIAN_POINT('',(141.5,-115.387868,0.)); +#199253 = DIRECTION('',(0.,0.,1.)); +#199254 = DIRECTION('',(1.,0.,-0.)); +#199255 = CYLINDRICAL_SURFACE('',#199256,0.137255); +#199256 = AXIS2_PLACEMENT_3D('',#199257,#199258,#199259); +#199257 = CARTESIAN_POINT('',(141.5,-115.387868,0.)); +#199258 = DIRECTION('',(0.,0.,1.)); +#199259 = DIRECTION('',(1.,0.,-0.)); +#199260 = ADVANCED_FACE('',(#199261,#199281,#199284),#199287,.F.); +#199261 = FACE_BOUND('',#199262,.F.); +#199262 = EDGE_LOOP('',(#199263,#199264,#199265,#199266,#199267,#199268, + #199269,#199270,#199271,#199272,#199273,#199274,#199275,#199276, + #199277,#199278,#199279,#199280)); +#199263 = ORIENTED_EDGE('',*,*,#198662,.T.); +#199264 = ORIENTED_EDGE('',*,*,#198693,.T.); +#199265 = ORIENTED_EDGE('',*,*,#198724,.T.); +#199266 = ORIENTED_EDGE('',*,*,#198755,.T.); +#199267 = ORIENTED_EDGE('',*,*,#198786,.T.); +#199268 = ORIENTED_EDGE('',*,*,#198818,.T.); +#199269 = ORIENTED_EDGE('',*,*,#198850,.T.); +#199270 = ORIENTED_EDGE('',*,*,#198881,.T.); +#199271 = ORIENTED_EDGE('',*,*,#198912,.T.); +#199272 = ORIENTED_EDGE('',*,*,#198943,.T.); +#199273 = ORIENTED_EDGE('',*,*,#198974,.T.); +#199274 = ORIENTED_EDGE('',*,*,#199005,.T.); +#199275 = ORIENTED_EDGE('',*,*,#199036,.T.); +#199276 = ORIENTED_EDGE('',*,*,#199068,.T.); +#199277 = ORIENTED_EDGE('',*,*,#199100,.T.); +#199278 = ORIENTED_EDGE('',*,*,#199131,.T.); +#199279 = ORIENTED_EDGE('',*,*,#199162,.T.); +#199280 = ORIENTED_EDGE('',*,*,#199184,.T.); +#199281 = FACE_BOUND('',#199282,.F.); +#199282 = EDGE_LOOP('',(#199283)); +#199283 = ORIENTED_EDGE('',*,*,#199216,.T.); +#199284 = FACE_BOUND('',#199285,.F.); +#199285 = EDGE_LOOP('',(#199286)); +#199286 = ORIENTED_EDGE('',*,*,#199249,.T.); +#199287 = PLANE('',#199288); +#199288 = AXIS2_PLACEMENT_3D('',#199289,#199290,#199291); +#199289 = CARTESIAN_POINT('',(0.,0.,0.)); +#199290 = DIRECTION('',(-0.,-0.,-1.)); +#199291 = DIRECTION('',(-1.,0.,0.)); +#199292 = ADVANCED_FACE('',(#199293,#199313,#199316),#199319,.T.); +#199293 = FACE_BOUND('',#199294,.T.); +#199294 = EDGE_LOOP('',(#199295,#199296,#199297,#199298,#199299,#199300, + #199301,#199302,#199303,#199304,#199305,#199306,#199307,#199308, + #199309,#199310,#199311,#199312)); +#199295 = ORIENTED_EDGE('',*,*,#198646,.T.); +#199296 = ORIENTED_EDGE('',*,*,#198677,.T.); +#199297 = ORIENTED_EDGE('',*,*,#198708,.T.); +#199298 = ORIENTED_EDGE('',*,*,#198739,.T.); +#199299 = ORIENTED_EDGE('',*,*,#198770,.T.); +#199300 = ORIENTED_EDGE('',*,*,#198801,.T.); +#199301 = ORIENTED_EDGE('',*,*,#198834,.T.); +#199302 = ORIENTED_EDGE('',*,*,#198865,.T.); +#199303 = ORIENTED_EDGE('',*,*,#198896,.T.); +#199304 = ORIENTED_EDGE('',*,*,#198927,.T.); +#199305 = ORIENTED_EDGE('',*,*,#198958,.T.); +#199306 = ORIENTED_EDGE('',*,*,#198989,.T.); +#199307 = ORIENTED_EDGE('',*,*,#199020,.T.); +#199308 = ORIENTED_EDGE('',*,*,#199051,.T.); +#199309 = ORIENTED_EDGE('',*,*,#199084,.T.); +#199310 = ORIENTED_EDGE('',*,*,#199115,.T.); +#199311 = ORIENTED_EDGE('',*,*,#199146,.T.); +#199312 = ORIENTED_EDGE('',*,*,#199177,.T.); +#199313 = FACE_BOUND('',#199314,.T.); +#199314 = EDGE_LOOP('',(#199315)); +#199315 = ORIENTED_EDGE('',*,*,#199208,.T.); +#199316 = FACE_BOUND('',#199317,.T.); +#199317 = EDGE_LOOP('',(#199318)); +#199318 = ORIENTED_EDGE('',*,*,#199241,.T.); +#199319 = PLANE('',#199320); +#199320 = AXIS2_PLACEMENT_3D('',#199321,#199322,#199323); +#199321 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#199322 = DIRECTION('',(-0.,-0.,-1.)); +#199323 = DIRECTION('',(-1.,0.,0.)); +#199324 = MANIFOLD_SOLID_BREP('',#199325); +#199325 = CLOSED_SHELL('',(#199326,#199366,#199397,#199428,#199459, + #199490,#199521,#199552,#199583,#199614,#199645,#199676,#199709, + #199740,#199771,#199802,#199833,#199864,#199895,#199926,#199957, + #199988,#200019,#200050,#200081,#200114,#200136,#200169,#200202, + #200242)); +#199326 = ADVANCED_FACE('',(#199327),#199361,.F.); +#199327 = FACE_BOUND('',#199328,.F.); +#199328 = EDGE_LOOP('',(#199329,#199339,#199347,#199355)); +#199329 = ORIENTED_EDGE('',*,*,#199330,.T.); +#199330 = EDGE_CURVE('',#199331,#199333,#199335,.T.); +#199331 = VERTEX_POINT('',#199332); +#199332 = CARTESIAN_POINT('',(144.871921,-78.7695,0.)); +#199333 = VERTEX_POINT('',#199334); +#199334 = CARTESIAN_POINT('',(144.871921,-78.7695,-3.5E-02)); +#199335 = LINE('',#199336,#199337); +#199336 = CARTESIAN_POINT('',(144.871921,-78.7695,0.)); +#199337 = VECTOR('',#199338,1.); +#199338 = DIRECTION('',(0.,0.,-1.)); +#199339 = ORIENTED_EDGE('',*,*,#199340,.T.); +#199340 = EDGE_CURVE('',#199333,#199341,#199343,.T.); +#199341 = VERTEX_POINT('',#199342); +#199342 = CARTESIAN_POINT('',(144.6,-79.041422,-3.5E-02)); +#199343 = LINE('',#199344,#199345); +#199344 = CARTESIAN_POINT('',(144.871921,-78.7695,-3.5E-02)); +#199345 = VECTOR('',#199346,1.); +#199346 = DIRECTION('',(-0.707105480981,-0.707108081389,0.)); +#199347 = ORIENTED_EDGE('',*,*,#199348,.F.); +#199348 = EDGE_CURVE('',#199349,#199341,#199351,.T.); +#199349 = VERTEX_POINT('',#199350); +#199350 = CARTESIAN_POINT('',(144.6,-79.041422,0.)); +#199351 = LINE('',#199352,#199353); +#199352 = CARTESIAN_POINT('',(144.6,-79.041422,0.)); +#199353 = VECTOR('',#199354,1.); +#199354 = DIRECTION('',(0.,0.,-1.)); +#199355 = ORIENTED_EDGE('',*,*,#199356,.F.); +#199356 = EDGE_CURVE('',#199331,#199349,#199357,.T.); +#199357 = LINE('',#199358,#199359); +#199358 = CARTESIAN_POINT('',(144.871921,-78.7695,0.)); +#199359 = VECTOR('',#199360,1.); +#199360 = DIRECTION('',(-0.707105480981,-0.707108081389,0.)); +#199361 = PLANE('',#199362); +#199362 = AXIS2_PLACEMENT_3D('',#199363,#199364,#199365); +#199363 = CARTESIAN_POINT('',(144.871921,-78.7695,0.)); +#199364 = DIRECTION('',(-0.707108081389,0.707105480981,0.)); +#199365 = DIRECTION('',(-0.707105480981,-0.707108081389,0.)); +#199366 = ADVANCED_FACE('',(#199367),#199392,.F.); +#199367 = FACE_BOUND('',#199368,.F.); +#199368 = EDGE_LOOP('',(#199369,#199370,#199378,#199386)); +#199369 = ORIENTED_EDGE('',*,*,#199348,.T.); +#199370 = ORIENTED_EDGE('',*,*,#199371,.T.); +#199371 = EDGE_CURVE('',#199341,#199372,#199374,.T.); +#199372 = VERTEX_POINT('',#199373); +#199373 = CARTESIAN_POINT('',(144.598079,-79.539606,-3.5E-02)); +#199374 = LINE('',#199375,#199376); +#199375 = CARTESIAN_POINT('',(144.6,-79.041422,-3.5E-02)); +#199376 = VECTOR('',#199377,1.); +#199377 = DIRECTION('',(-3.855976343445E-03,-0.999992565696,0.)); +#199378 = ORIENTED_EDGE('',*,*,#199379,.F.); +#199379 = EDGE_CURVE('',#199380,#199372,#199382,.T.); +#199380 = VERTEX_POINT('',#199381); +#199381 = CARTESIAN_POINT('',(144.598079,-79.539606,0.)); +#199382 = LINE('',#199383,#199384); +#199383 = CARTESIAN_POINT('',(144.598079,-79.539606,0.)); +#199384 = VECTOR('',#199385,1.); +#199385 = DIRECTION('',(0.,0.,-1.)); +#199386 = ORIENTED_EDGE('',*,*,#199387,.F.); +#199387 = EDGE_CURVE('',#199349,#199380,#199388,.T.); +#199388 = LINE('',#199389,#199390); +#199389 = CARTESIAN_POINT('',(144.6,-79.041422,0.)); +#199390 = VECTOR('',#199391,1.); +#199391 = DIRECTION('',(-3.855976343445E-03,-0.999992565696,0.)); +#199392 = PLANE('',#199393); +#199393 = AXIS2_PLACEMENT_3D('',#199394,#199395,#199396); +#199394 = CARTESIAN_POINT('',(144.6,-79.041422,0.)); +#199395 = DIRECTION('',(-0.999992565696,3.855976343445E-03,0.)); +#199396 = DIRECTION('',(-3.855976343445E-03,-0.999992565696,0.)); +#199397 = ADVANCED_FACE('',(#199398),#199423,.F.); +#199398 = FACE_BOUND('',#199399,.F.); +#199399 = EDGE_LOOP('',(#199400,#199401,#199409,#199417)); +#199400 = ORIENTED_EDGE('',*,*,#199379,.T.); +#199401 = ORIENTED_EDGE('',*,*,#199402,.T.); +#199402 = EDGE_CURVE('',#199372,#199403,#199405,.T.); +#199403 = VERTEX_POINT('',#199404); +#199404 = CARTESIAN_POINT('',(144.583147,-79.575654,-3.5E-02)); +#199405 = LINE('',#199406,#199407); +#199406 = CARTESIAN_POINT('',(144.598079,-79.539606,-3.5E-02)); +#199407 = VECTOR('',#199408,1.); +#199408 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#199409 = ORIENTED_EDGE('',*,*,#199410,.F.); +#199410 = EDGE_CURVE('',#199411,#199403,#199413,.T.); +#199411 = VERTEX_POINT('',#199412); +#199412 = CARTESIAN_POINT('',(144.583147,-79.575654,0.)); +#199413 = LINE('',#199414,#199415); +#199414 = CARTESIAN_POINT('',(144.583147,-79.575654,0.)); +#199415 = VECTOR('',#199416,1.); +#199416 = DIRECTION('',(0.,0.,-1.)); +#199417 = ORIENTED_EDGE('',*,*,#199418,.F.); +#199418 = EDGE_CURVE('',#199380,#199411,#199419,.T.); +#199419 = LINE('',#199420,#199421); +#199420 = CARTESIAN_POINT('',(144.598079,-79.539606,0.)); +#199421 = VECTOR('',#199422,1.); +#199422 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#199423 = PLANE('',#199424); +#199424 = AXIS2_PLACEMENT_3D('',#199425,#199426,#199427); +#199425 = CARTESIAN_POINT('',(144.598079,-79.539606,0.)); +#199426 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#199427 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#199428 = ADVANCED_FACE('',(#199429),#199454,.F.); +#199429 = FACE_BOUND('',#199430,.F.); +#199430 = EDGE_LOOP('',(#199431,#199432,#199440,#199448)); +#199431 = ORIENTED_EDGE('',*,*,#199410,.T.); +#199432 = ORIENTED_EDGE('',*,*,#199433,.T.); +#199433 = EDGE_CURVE('',#199403,#199434,#199436,.T.); +#199434 = VERTEX_POINT('',#199435); +#199435 = CARTESIAN_POINT('',(144.434313,-79.727206,-3.5E-02)); +#199436 = LINE('',#199437,#199438); +#199437 = CARTESIAN_POINT('',(144.583147,-79.575654,-3.5E-02)); +#199438 = VECTOR('',#199439,1.); +#199439 = DIRECTION('',(-0.700679943322,-0.713475729809,0.)); +#199440 = ORIENTED_EDGE('',*,*,#199441,.F.); +#199441 = EDGE_CURVE('',#199442,#199434,#199444,.T.); +#199442 = VERTEX_POINT('',#199443); +#199443 = CARTESIAN_POINT('',(144.434313,-79.727206,0.)); +#199444 = LINE('',#199445,#199446); +#199445 = CARTESIAN_POINT('',(144.434313,-79.727206,0.)); +#199446 = VECTOR('',#199447,1.); +#199447 = DIRECTION('',(0.,0.,-1.)); +#199448 = ORIENTED_EDGE('',*,*,#199449,.F.); +#199449 = EDGE_CURVE('',#199411,#199442,#199450,.T.); +#199450 = LINE('',#199451,#199452); +#199451 = CARTESIAN_POINT('',(144.583147,-79.575654,0.)); +#199452 = VECTOR('',#199453,1.); +#199453 = DIRECTION('',(-0.700679943322,-0.713475729809,0.)); +#199454 = PLANE('',#199455); +#199455 = AXIS2_PLACEMENT_3D('',#199456,#199457,#199458); +#199456 = CARTESIAN_POINT('',(144.583147,-79.575654,0.)); +#199457 = DIRECTION('',(-0.713475729809,0.700679943322,0.)); +#199458 = DIRECTION('',(-0.700679943322,-0.713475729809,0.)); +#199459 = ADVANCED_FACE('',(#199460),#199485,.F.); +#199460 = FACE_BOUND('',#199461,.F.); +#199461 = EDGE_LOOP('',(#199462,#199463,#199471,#199479)); +#199462 = ORIENTED_EDGE('',*,*,#199441,.T.); +#199463 = ORIENTED_EDGE('',*,*,#199464,.T.); +#199464 = EDGE_CURVE('',#199434,#199465,#199467,.T.); +#199465 = VERTEX_POINT('',#199466); +#199466 = CARTESIAN_POINT('',(144.434313,-80.14142,-3.5E-02)); +#199467 = LINE('',#199468,#199469); +#199468 = CARTESIAN_POINT('',(144.434313,-79.727206,-3.5E-02)); +#199469 = VECTOR('',#199470,1.); +#199470 = DIRECTION('',(0.,-1.,0.)); +#199471 = ORIENTED_EDGE('',*,*,#199472,.F.); +#199472 = EDGE_CURVE('',#199473,#199465,#199475,.T.); +#199473 = VERTEX_POINT('',#199474); +#199474 = CARTESIAN_POINT('',(144.434313,-80.14142,0.)); +#199475 = LINE('',#199476,#199477); +#199476 = CARTESIAN_POINT('',(144.434313,-80.14142,0.)); +#199477 = VECTOR('',#199478,1.); +#199478 = DIRECTION('',(0.,0.,-1.)); +#199479 = ORIENTED_EDGE('',*,*,#199480,.F.); +#199480 = EDGE_CURVE('',#199442,#199473,#199481,.T.); +#199481 = LINE('',#199482,#199483); +#199482 = CARTESIAN_POINT('',(144.434313,-79.727206,0.)); +#199483 = VECTOR('',#199484,1.); +#199484 = DIRECTION('',(0.,-1.,0.)); +#199485 = PLANE('',#199486); +#199486 = AXIS2_PLACEMENT_3D('',#199487,#199488,#199489); +#199487 = CARTESIAN_POINT('',(144.434313,-79.727206,0.)); +#199488 = DIRECTION('',(-1.,-0.,-0.)); +#199489 = DIRECTION('',(0.,-1.,0.)); +#199490 = ADVANCED_FACE('',(#199491),#199516,.F.); +#199491 = FACE_BOUND('',#199492,.F.); +#199492 = EDGE_LOOP('',(#199493,#199494,#199502,#199510)); +#199493 = ORIENTED_EDGE('',*,*,#199472,.T.); +#199494 = ORIENTED_EDGE('',*,*,#199495,.T.); +#199495 = EDGE_CURVE('',#199465,#199496,#199498,.T.); +#199496 = VERTEX_POINT('',#199497); +#199497 = CARTESIAN_POINT('',(144.983147,-80.692972,-3.5E-02)); +#199498 = LINE('',#199499,#199500); +#199499 = CARTESIAN_POINT('',(144.434313,-80.14142,-3.5E-02)); +#199500 = VECTOR('',#199501,1.); +#199501 = DIRECTION('',(0.705358045775,-0.708851202482,0.)); +#199502 = ORIENTED_EDGE('',*,*,#199503,.F.); +#199503 = EDGE_CURVE('',#199504,#199496,#199506,.T.); +#199504 = VERTEX_POINT('',#199505); +#199505 = CARTESIAN_POINT('',(144.983147,-80.692972,0.)); +#199506 = LINE('',#199507,#199508); +#199507 = CARTESIAN_POINT('',(144.983147,-80.692972,0.)); +#199508 = VECTOR('',#199509,1.); +#199509 = DIRECTION('',(0.,0.,-1.)); +#199510 = ORIENTED_EDGE('',*,*,#199511,.F.); +#199511 = EDGE_CURVE('',#199473,#199504,#199512,.T.); +#199512 = LINE('',#199513,#199514); +#199513 = CARTESIAN_POINT('',(144.434313,-80.14142,0.)); +#199514 = VECTOR('',#199515,1.); +#199515 = DIRECTION('',(0.705358045775,-0.708851202482,0.)); +#199516 = PLANE('',#199517); +#199517 = AXIS2_PLACEMENT_3D('',#199518,#199519,#199520); +#199518 = CARTESIAN_POINT('',(144.434313,-80.14142,0.)); +#199519 = DIRECTION('',(-0.708851202482,-0.705358045775,-0.)); +#199520 = DIRECTION('',(0.705358045775,-0.708851202482,0.)); +#199521 = ADVANCED_FACE('',(#199522),#199547,.F.); +#199522 = FACE_BOUND('',#199523,.F.); +#199523 = EDGE_LOOP('',(#199524,#199525,#199533,#199541)); +#199524 = ORIENTED_EDGE('',*,*,#199503,.T.); +#199525 = ORIENTED_EDGE('',*,*,#199526,.T.); +#199526 = EDGE_CURVE('',#199496,#199527,#199529,.T.); +#199527 = VERTEX_POINT('',#199528); +#199528 = CARTESIAN_POINT('',(144.998079,-80.72902,-3.5E-02)); +#199529 = LINE('',#199530,#199531); +#199530 = CARTESIAN_POINT('',(144.983147,-80.692972,-3.5E-02)); +#199531 = VECTOR('',#199532,1.); +#199532 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#199533 = ORIENTED_EDGE('',*,*,#199534,.F.); +#199534 = EDGE_CURVE('',#199535,#199527,#199537,.T.); +#199535 = VERTEX_POINT('',#199536); +#199536 = CARTESIAN_POINT('',(144.998079,-80.72902,0.)); +#199537 = LINE('',#199538,#199539); +#199538 = CARTESIAN_POINT('',(144.998079,-80.72902,0.)); +#199539 = VECTOR('',#199540,1.); +#199540 = DIRECTION('',(0.,0.,-1.)); +#199541 = ORIENTED_EDGE('',*,*,#199542,.F.); +#199542 = EDGE_CURVE('',#199504,#199535,#199543,.T.); +#199543 = LINE('',#199544,#199545); +#199544 = CARTESIAN_POINT('',(144.983147,-80.692972,0.)); +#199545 = VECTOR('',#199546,1.); +#199546 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#199547 = PLANE('',#199548); +#199548 = AXIS2_PLACEMENT_3D('',#199549,#199550,#199551); +#199549 = CARTESIAN_POINT('',(144.983147,-80.692972,0.)); +#199550 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#199551 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#199552 = ADVANCED_FACE('',(#199553),#199578,.F.); +#199553 = FACE_BOUND('',#199554,.F.); +#199554 = EDGE_LOOP('',(#199555,#199556,#199564,#199572)); +#199555 = ORIENTED_EDGE('',*,*,#199534,.T.); +#199556 = ORIENTED_EDGE('',*,*,#199557,.T.); +#199557 = EDGE_CURVE('',#199527,#199558,#199560,.T.); +#199558 = VERTEX_POINT('',#199559); +#199559 = CARTESIAN_POINT('',(144.998079,-86.119509,-3.5E-02)); +#199560 = LINE('',#199561,#199562); +#199561 = CARTESIAN_POINT('',(144.998079,-80.72902,-3.5E-02)); +#199562 = VECTOR('',#199563,1.); +#199563 = DIRECTION('',(0.,-1.,0.)); +#199564 = ORIENTED_EDGE('',*,*,#199565,.F.); +#199565 = EDGE_CURVE('',#199566,#199558,#199568,.T.); +#199566 = VERTEX_POINT('',#199567); +#199567 = CARTESIAN_POINT('',(144.998079,-86.119509,0.)); +#199568 = LINE('',#199569,#199570); +#199569 = CARTESIAN_POINT('',(144.998079,-86.119509,0.)); +#199570 = VECTOR('',#199571,1.); +#199571 = DIRECTION('',(0.,0.,-1.)); +#199572 = ORIENTED_EDGE('',*,*,#199573,.F.); +#199573 = EDGE_CURVE('',#199535,#199566,#199574,.T.); +#199574 = LINE('',#199575,#199576); +#199575 = CARTESIAN_POINT('',(144.998079,-80.72902,0.)); +#199576 = VECTOR('',#199577,1.); +#199577 = DIRECTION('',(0.,-1.,0.)); +#199578 = PLANE('',#199579); +#199579 = AXIS2_PLACEMENT_3D('',#199580,#199581,#199582); +#199580 = CARTESIAN_POINT('',(144.998079,-80.72902,0.)); +#199581 = DIRECTION('',(-1.,-0.,-0.)); +#199582 = DIRECTION('',(0.,-1.,0.)); +#199583 = ADVANCED_FACE('',(#199584),#199609,.F.); +#199584 = FACE_BOUND('',#199585,.F.); +#199585 = EDGE_LOOP('',(#199586,#199587,#199595,#199603)); +#199586 = ORIENTED_EDGE('',*,*,#199565,.T.); +#199587 = ORIENTED_EDGE('',*,*,#199588,.T.); +#199588 = EDGE_CURVE('',#199558,#199589,#199591,.T.); +#199589 = VERTEX_POINT('',#199590); +#199590 = CARTESIAN_POINT('',(144.983147,-86.155558,-3.5E-02)); +#199591 = LINE('',#199592,#199593); +#199592 = CARTESIAN_POINT('',(144.998079,-86.119509,-3.5E-02)); +#199593 = VECTOR('',#199594,1.); +#199594 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#199595 = ORIENTED_EDGE('',*,*,#199596,.F.); +#199596 = EDGE_CURVE('',#199597,#199589,#199599,.T.); +#199597 = VERTEX_POINT('',#199598); +#199598 = CARTESIAN_POINT('',(144.983147,-86.155558,0.)); +#199599 = LINE('',#199600,#199601); +#199600 = CARTESIAN_POINT('',(144.983147,-86.155558,0.)); +#199601 = VECTOR('',#199602,1.); +#199602 = DIRECTION('',(0.,0.,-1.)); +#199603 = ORIENTED_EDGE('',*,*,#199604,.F.); +#199604 = EDGE_CURVE('',#199566,#199597,#199605,.T.); +#199605 = LINE('',#199606,#199607); +#199606 = CARTESIAN_POINT('',(144.998079,-86.119509,0.)); +#199607 = VECTOR('',#199608,1.); +#199608 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#199609 = PLANE('',#199610); +#199610 = AXIS2_PLACEMENT_3D('',#199611,#199612,#199613); +#199611 = CARTESIAN_POINT('',(144.998079,-86.119509,0.)); +#199612 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#199613 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#199614 = ADVANCED_FACE('',(#199615),#199640,.F.); +#199615 = FACE_BOUND('',#199616,.F.); +#199616 = EDGE_LOOP('',(#199617,#199618,#199626,#199634)); +#199617 = ORIENTED_EDGE('',*,*,#199596,.T.); +#199618 = ORIENTED_EDGE('',*,*,#199619,.T.); +#199619 = EDGE_CURVE('',#199589,#199620,#199622,.T.); +#199620 = VERTEX_POINT('',#199621); +#199621 = CARTESIAN_POINT('',(144.2695,-86.871921,-3.5E-02)); +#199622 = LINE('',#199623,#199624); +#199623 = CARTESIAN_POINT('',(144.983147,-86.155558,-3.5E-02)); +#199624 = VECTOR('',#199625,1.); +#199625 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#199626 = ORIENTED_EDGE('',*,*,#199627,.F.); +#199627 = EDGE_CURVE('',#199628,#199620,#199630,.T.); +#199628 = VERTEX_POINT('',#199629); +#199629 = CARTESIAN_POINT('',(144.2695,-86.871921,0.)); +#199630 = LINE('',#199631,#199632); +#199631 = CARTESIAN_POINT('',(144.2695,-86.871921,0.)); +#199632 = VECTOR('',#199633,1.); +#199633 = DIRECTION('',(0.,0.,-1.)); +#199634 = ORIENTED_EDGE('',*,*,#199635,.F.); +#199635 = EDGE_CURVE('',#199597,#199628,#199636,.T.); +#199636 = LINE('',#199637,#199638); +#199637 = CARTESIAN_POINT('',(144.983147,-86.155558,0.)); +#199638 = VECTOR('',#199639,1.); +#199639 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#199640 = PLANE('',#199641); +#199641 = AXIS2_PLACEMENT_3D('',#199642,#199643,#199644); +#199642 = CARTESIAN_POINT('',(144.983147,-86.155558,0.)); +#199643 = DIRECTION('',(-0.70844850241,0.705762509229,0.)); +#199644 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#199645 = ADVANCED_FACE('',(#199646),#199671,.F.); +#199646 = FACE_BOUND('',#199647,.F.); +#199647 = EDGE_LOOP('',(#199648,#199649,#199657,#199665)); +#199648 = ORIENTED_EDGE('',*,*,#199627,.T.); +#199649 = ORIENTED_EDGE('',*,*,#199650,.T.); +#199650 = EDGE_CURVE('',#199620,#199651,#199653,.T.); +#199651 = VERTEX_POINT('',#199652); +#199652 = CARTESIAN_POINT('',(144.277164,-86.885195,-3.5E-02)); +#199653 = LINE('',#199654,#199655); +#199654 = CARTESIAN_POINT('',(144.2695,-86.871921,-3.5E-02)); +#199655 = VECTOR('',#199656,1.); +#199656 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#199657 = ORIENTED_EDGE('',*,*,#199658,.F.); +#199658 = EDGE_CURVE('',#199659,#199651,#199661,.T.); +#199659 = VERTEX_POINT('',#199660); +#199660 = CARTESIAN_POINT('',(144.277164,-86.885195,0.)); +#199661 = LINE('',#199662,#199663); +#199662 = CARTESIAN_POINT('',(144.277164,-86.885195,0.)); +#199663 = VECTOR('',#199664,1.); +#199664 = DIRECTION('',(0.,0.,-1.)); +#199665 = ORIENTED_EDGE('',*,*,#199666,.F.); +#199666 = EDGE_CURVE('',#199628,#199659,#199667,.T.); +#199667 = LINE('',#199668,#199669); +#199668 = CARTESIAN_POINT('',(144.2695,-86.871921,0.)); +#199669 = VECTOR('',#199670,1.); +#199670 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#199671 = PLANE('',#199672); +#199672 = AXIS2_PLACEMENT_3D('',#199673,#199674,#199675); +#199673 = CARTESIAN_POINT('',(144.2695,-86.871921,0.)); +#199674 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#199675 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#199676 = ADVANCED_FACE('',(#199677),#199704,.T.); +#199677 = FACE_BOUND('',#199678,.F.); +#199678 = EDGE_LOOP('',(#199679,#199680,#199689,#199697)); +#199679 = ORIENTED_EDGE('',*,*,#199658,.T.); +#199680 = ORIENTED_EDGE('',*,*,#199681,.T.); +#199681 = EDGE_CURVE('',#199651,#199682,#199684,.T.); +#199682 = VERTEX_POINT('',#199683); +#199683 = CARTESIAN_POINT('',(144.114805,-86.722836,-3.5E-02)); +#199684 = CIRCLE('',#199685,0.299999934501); +#199685 = AXIS2_PLACEMENT_3D('',#199686,#199687,#199688); +#199686 = CARTESIAN_POINT('',(144.00000014059,-86.9999998594,-3.5E-02)); +#199687 = DIRECTION('',(0.,0.,-1.)); +#199688 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#199689 = ORIENTED_EDGE('',*,*,#199690,.F.); +#199690 = EDGE_CURVE('',#199691,#199682,#199693,.T.); +#199691 = VERTEX_POINT('',#199692); +#199692 = CARTESIAN_POINT('',(144.114805,-86.722836,0.)); +#199693 = LINE('',#199694,#199695); +#199694 = CARTESIAN_POINT('',(144.114805,-86.722836,0.)); +#199695 = VECTOR('',#199696,1.); +#199696 = DIRECTION('',(0.,0.,-1.)); +#199697 = ORIENTED_EDGE('',*,*,#199698,.F.); +#199698 = EDGE_CURVE('',#199659,#199691,#199699,.T.); +#199699 = CIRCLE('',#199700,0.299999934501); +#199700 = AXIS2_PLACEMENT_3D('',#199701,#199702,#199703); +#199701 = CARTESIAN_POINT('',(144.00000014059,-86.9999998594,0.)); +#199702 = DIRECTION('',(0.,0.,-1.)); +#199703 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#199704 = CYLINDRICAL_SURFACE('',#199705,0.299999934501); +#199705 = AXIS2_PLACEMENT_3D('',#199706,#199707,#199708); +#199706 = CARTESIAN_POINT('',(144.00000014059,-86.9999998594,0.)); +#199707 = DIRECTION('',(-0.,-0.,1.)); +#199708 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#199709 = ADVANCED_FACE('',(#199710),#199735,.F.); +#199710 = FACE_BOUND('',#199711,.F.); +#199711 = EDGE_LOOP('',(#199712,#199713,#199721,#199729)); +#199712 = ORIENTED_EDGE('',*,*,#199690,.T.); +#199713 = ORIENTED_EDGE('',*,*,#199714,.T.); +#199714 = EDGE_CURVE('',#199682,#199715,#199717,.T.); +#199715 = VERTEX_POINT('',#199716); +#199716 = CARTESIAN_POINT('',(144.128078,-86.730499,-3.5E-02)); +#199717 = LINE('',#199718,#199719); +#199718 = CARTESIAN_POINT('',(144.114805,-86.722836,-3.5E-02)); +#199719 = VECTOR('',#199720,1.); +#199720 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#199721 = ORIENTED_EDGE('',*,*,#199722,.F.); +#199722 = EDGE_CURVE('',#199723,#199715,#199725,.T.); +#199723 = VERTEX_POINT('',#199724); +#199724 = CARTESIAN_POINT('',(144.128078,-86.730499,0.)); +#199725 = LINE('',#199726,#199727); +#199726 = CARTESIAN_POINT('',(144.128078,-86.730499,0.)); +#199727 = VECTOR('',#199728,1.); +#199728 = DIRECTION('',(0.,0.,-1.)); +#199729 = ORIENTED_EDGE('',*,*,#199730,.F.); +#199730 = EDGE_CURVE('',#199691,#199723,#199731,.T.); +#199731 = LINE('',#199732,#199733); +#199732 = CARTESIAN_POINT('',(144.114805,-86.722836,0.)); +#199733 = VECTOR('',#199734,1.); +#199734 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#199735 = PLANE('',#199736); +#199736 = AXIS2_PLACEMENT_3D('',#199737,#199738,#199739); +#199737 = CARTESIAN_POINT('',(144.114805,-86.722836,0.)); +#199738 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#199739 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#199740 = ADVANCED_FACE('',(#199741),#199766,.F.); +#199741 = FACE_BOUND('',#199742,.F.); +#199742 = EDGE_LOOP('',(#199743,#199744,#199752,#199760)); +#199743 = ORIENTED_EDGE('',*,*,#199722,.T.); +#199744 = ORIENTED_EDGE('',*,*,#199745,.T.); +#199745 = EDGE_CURVE('',#199715,#199746,#199748,.T.); +#199746 = VERTEX_POINT('',#199747); +#199747 = CARTESIAN_POINT('',(144.8,-86.058578,-3.5E-02)); +#199748 = LINE('',#199749,#199750); +#199749 = CARTESIAN_POINT('',(144.128078,-86.730499,-3.5E-02)); +#199750 = VECTOR('',#199751,1.); +#199751 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#199752 = ORIENTED_EDGE('',*,*,#199753,.F.); +#199753 = EDGE_CURVE('',#199754,#199746,#199756,.T.); +#199754 = VERTEX_POINT('',#199755); +#199755 = CARTESIAN_POINT('',(144.8,-86.058578,0.)); +#199756 = LINE('',#199757,#199758); +#199757 = CARTESIAN_POINT('',(144.8,-86.058578,0.)); +#199758 = VECTOR('',#199759,1.); +#199759 = DIRECTION('',(0.,0.,-1.)); +#199760 = ORIENTED_EDGE('',*,*,#199761,.F.); +#199761 = EDGE_CURVE('',#199723,#199754,#199762,.T.); +#199762 = LINE('',#199763,#199764); +#199763 = CARTESIAN_POINT('',(144.128078,-86.730499,0.)); +#199764 = VECTOR('',#199765,1.); +#199765 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#199766 = PLANE('',#199767); +#199767 = AXIS2_PLACEMENT_3D('',#199768,#199769,#199770); +#199768 = CARTESIAN_POINT('',(144.128078,-86.730499,0.)); +#199769 = DIRECTION('',(0.707106255004,-0.707107307369,0.)); +#199770 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#199771 = ADVANCED_FACE('',(#199772),#199797,.F.); +#199772 = FACE_BOUND('',#199773,.F.); +#199773 = EDGE_LOOP('',(#199774,#199775,#199783,#199791)); +#199774 = ORIENTED_EDGE('',*,*,#199753,.T.); +#199775 = ORIENTED_EDGE('',*,*,#199776,.T.); +#199776 = EDGE_CURVE('',#199746,#199777,#199779,.T.); +#199777 = VERTEX_POINT('',#199778); +#199778 = CARTESIAN_POINT('',(144.8,-80.789951,-3.5E-02)); +#199779 = LINE('',#199780,#199781); +#199780 = CARTESIAN_POINT('',(144.8,-86.058578,-3.5E-02)); +#199781 = VECTOR('',#199782,1.); +#199782 = DIRECTION('',(0.,1.,0.)); +#199783 = ORIENTED_EDGE('',*,*,#199784,.F.); +#199784 = EDGE_CURVE('',#199785,#199777,#199787,.T.); +#199785 = VERTEX_POINT('',#199786); +#199786 = CARTESIAN_POINT('',(144.8,-80.789951,0.)); +#199787 = LINE('',#199788,#199789); +#199788 = CARTESIAN_POINT('',(144.8,-80.789951,0.)); +#199789 = VECTOR('',#199790,1.); +#199790 = DIRECTION('',(0.,0.,-1.)); +#199791 = ORIENTED_EDGE('',*,*,#199792,.F.); +#199792 = EDGE_CURVE('',#199754,#199785,#199793,.T.); +#199793 = LINE('',#199794,#199795); +#199794 = CARTESIAN_POINT('',(144.8,-86.058578,0.)); +#199795 = VECTOR('',#199796,1.); +#199796 = DIRECTION('',(0.,1.,0.)); +#199797 = PLANE('',#199798); +#199798 = AXIS2_PLACEMENT_3D('',#199799,#199800,#199801); +#199799 = CARTESIAN_POINT('',(144.8,-86.058578,0.)); +#199800 = DIRECTION('',(1.,-0.,0.)); +#199801 = DIRECTION('',(0.,1.,0.)); +#199802 = ADVANCED_FACE('',(#199803),#199828,.F.); +#199803 = FACE_BOUND('',#199804,.F.); +#199804 = EDGE_LOOP('',(#199805,#199806,#199814,#199822)); +#199805 = ORIENTED_EDGE('',*,*,#199784,.T.); +#199806 = ORIENTED_EDGE('',*,*,#199807,.T.); +#199807 = EDGE_CURVE('',#199777,#199808,#199810,.T.); +#199808 = VERTEX_POINT('',#199809); +#199809 = CARTESIAN_POINT('',(144.251166,-80.238399,-3.5E-02)); +#199810 = LINE('',#199811,#199812); +#199811 = CARTESIAN_POINT('',(144.8,-80.789951,-3.5E-02)); +#199812 = VECTOR('',#199813,1.); +#199813 = DIRECTION('',(-0.705358045775,0.708851202482,0.)); +#199814 = ORIENTED_EDGE('',*,*,#199815,.F.); +#199815 = EDGE_CURVE('',#199816,#199808,#199818,.T.); +#199816 = VERTEX_POINT('',#199817); +#199817 = CARTESIAN_POINT('',(144.251166,-80.238399,0.)); +#199818 = LINE('',#199819,#199820); +#199819 = CARTESIAN_POINT('',(144.251166,-80.238399,0.)); +#199820 = VECTOR('',#199821,1.); +#199821 = DIRECTION('',(0.,0.,-1.)); +#199822 = ORIENTED_EDGE('',*,*,#199823,.F.); +#199823 = EDGE_CURVE('',#199785,#199816,#199824,.T.); +#199824 = LINE('',#199825,#199826); +#199825 = CARTESIAN_POINT('',(144.8,-80.789951,0.)); +#199826 = VECTOR('',#199827,1.); +#199827 = DIRECTION('',(-0.705358045775,0.708851202482,0.)); +#199828 = PLANE('',#199829); +#199829 = AXIS2_PLACEMENT_3D('',#199830,#199831,#199832); +#199830 = CARTESIAN_POINT('',(144.8,-80.789951,0.)); +#199831 = DIRECTION('',(0.708851202482,0.705358045775,0.)); +#199832 = DIRECTION('',(-0.705358045775,0.708851202482,0.)); +#199833 = ADVANCED_FACE('',(#199834),#199859,.F.); +#199834 = FACE_BOUND('',#199835,.F.); +#199835 = EDGE_LOOP('',(#199836,#199837,#199845,#199853)); +#199836 = ORIENTED_EDGE('',*,*,#199815,.T.); +#199837 = ORIENTED_EDGE('',*,*,#199838,.T.); +#199838 = EDGE_CURVE('',#199808,#199839,#199841,.T.); +#199839 = VERTEX_POINT('',#199840); +#199840 = CARTESIAN_POINT('',(144.236234,-80.202351,-3.5E-02)); +#199841 = LINE('',#199842,#199843); +#199842 = CARTESIAN_POINT('',(144.251166,-80.238399,-3.5E-02)); +#199843 = VECTOR('',#199844,1.); +#199844 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#199845 = ORIENTED_EDGE('',*,*,#199846,.F.); +#199846 = EDGE_CURVE('',#199847,#199839,#199849,.T.); +#199847 = VERTEX_POINT('',#199848); +#199848 = CARTESIAN_POINT('',(144.236234,-80.202351,0.)); +#199849 = LINE('',#199850,#199851); +#199850 = CARTESIAN_POINT('',(144.236234,-80.202351,0.)); +#199851 = VECTOR('',#199852,1.); +#199852 = DIRECTION('',(0.,0.,-1.)); +#199853 = ORIENTED_EDGE('',*,*,#199854,.F.); +#199854 = EDGE_CURVE('',#199816,#199847,#199855,.T.); +#199855 = LINE('',#199856,#199857); +#199856 = CARTESIAN_POINT('',(144.251166,-80.238399,0.)); +#199857 = VECTOR('',#199858,1.); +#199858 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#199859 = PLANE('',#199860); +#199860 = AXIS2_PLACEMENT_3D('',#199861,#199862,#199863); +#199861 = CARTESIAN_POINT('',(144.251166,-80.238399,0.)); +#199862 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#199863 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#199864 = ADVANCED_FACE('',(#199865),#199890,.F.); +#199865 = FACE_BOUND('',#199866,.F.); +#199866 = EDGE_LOOP('',(#199867,#199868,#199876,#199884)); +#199867 = ORIENTED_EDGE('',*,*,#199846,.T.); +#199868 = ORIENTED_EDGE('',*,*,#199869,.T.); +#199869 = EDGE_CURVE('',#199839,#199870,#199872,.T.); +#199870 = VERTEX_POINT('',#199871); +#199871 = CARTESIAN_POINT('',(144.236234,-79.666275,-3.5E-02)); +#199872 = LINE('',#199873,#199874); +#199873 = CARTESIAN_POINT('',(144.236234,-80.202351,-3.5E-02)); +#199874 = VECTOR('',#199875,1.); +#199875 = DIRECTION('',(0.,1.,0.)); +#199876 = ORIENTED_EDGE('',*,*,#199877,.F.); +#199877 = EDGE_CURVE('',#199878,#199870,#199880,.T.); +#199878 = VERTEX_POINT('',#199879); +#199879 = CARTESIAN_POINT('',(144.236234,-79.666275,0.)); +#199880 = LINE('',#199881,#199882); +#199881 = CARTESIAN_POINT('',(144.236234,-79.666275,0.)); +#199882 = VECTOR('',#199883,1.); +#199883 = DIRECTION('',(0.,0.,-1.)); +#199884 = ORIENTED_EDGE('',*,*,#199885,.F.); +#199885 = EDGE_CURVE('',#199847,#199878,#199886,.T.); +#199886 = LINE('',#199887,#199888); +#199887 = CARTESIAN_POINT('',(144.236234,-80.202351,0.)); +#199888 = VECTOR('',#199889,1.); +#199889 = DIRECTION('',(0.,1.,0.)); +#199890 = PLANE('',#199891); +#199891 = AXIS2_PLACEMENT_3D('',#199892,#199893,#199894); +#199892 = CARTESIAN_POINT('',(144.236234,-80.202351,0.)); +#199893 = DIRECTION('',(1.,-0.,0.)); +#199894 = DIRECTION('',(0.,1.,0.)); +#199895 = ADVANCED_FACE('',(#199896),#199921,.F.); +#199896 = FACE_BOUND('',#199897,.F.); +#199897 = EDGE_LOOP('',(#199898,#199899,#199907,#199915)); +#199898 = ORIENTED_EDGE('',*,*,#199877,.T.); +#199899 = ORIENTED_EDGE('',*,*,#199900,.T.); +#199900 = EDGE_CURVE('',#199870,#199901,#199903,.T.); +#199901 = VERTEX_POINT('',#199902); +#199902 = CARTESIAN_POINT('',(144.251166,-79.630227,-3.5E-02)); +#199903 = LINE('',#199904,#199905); +#199904 = CARTESIAN_POINT('',(144.236234,-79.666275,-3.5E-02)); +#199905 = VECTOR('',#199906,1.); +#199906 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199907 = ORIENTED_EDGE('',*,*,#199908,.F.); +#199908 = EDGE_CURVE('',#199909,#199901,#199911,.T.); +#199909 = VERTEX_POINT('',#199910); +#199910 = CARTESIAN_POINT('',(144.251166,-79.630227,0.)); +#199911 = LINE('',#199912,#199913); +#199912 = CARTESIAN_POINT('',(144.251166,-79.630227,0.)); +#199913 = VECTOR('',#199914,1.); +#199914 = DIRECTION('',(0.,0.,-1.)); +#199915 = ORIENTED_EDGE('',*,*,#199916,.F.); +#199916 = EDGE_CURVE('',#199878,#199909,#199917,.T.); +#199917 = LINE('',#199918,#199919); +#199918 = CARTESIAN_POINT('',(144.236234,-79.666275,0.)); +#199919 = VECTOR('',#199920,1.); +#199920 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199921 = PLANE('',#199922); +#199922 = AXIS2_PLACEMENT_3D('',#199923,#199924,#199925); +#199923 = CARTESIAN_POINT('',(144.236234,-79.666275,0.)); +#199924 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#199925 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#199926 = ADVANCED_FACE('',(#199927),#199952,.F.); +#199927 = FACE_BOUND('',#199928,.F.); +#199928 = EDGE_LOOP('',(#199929,#199930,#199938,#199946)); +#199929 = ORIENTED_EDGE('',*,*,#199908,.T.); +#199930 = ORIENTED_EDGE('',*,*,#199931,.T.); +#199931 = EDGE_CURVE('',#199901,#199932,#199934,.T.); +#199932 = VERTEX_POINT('',#199933); +#199933 = CARTESIAN_POINT('',(144.4,-79.478675,-3.5E-02)); +#199934 = LINE('',#199935,#199936); +#199935 = CARTESIAN_POINT('',(144.251166,-79.630227,-3.5E-02)); +#199936 = VECTOR('',#199937,1.); +#199937 = DIRECTION('',(0.700679943322,0.713475729809,0.)); +#199938 = ORIENTED_EDGE('',*,*,#199939,.F.); +#199939 = EDGE_CURVE('',#199940,#199932,#199942,.T.); +#199940 = VERTEX_POINT('',#199941); +#199941 = CARTESIAN_POINT('',(144.4,-79.478675,0.)); +#199942 = LINE('',#199943,#199944); +#199943 = CARTESIAN_POINT('',(144.4,-79.478675,0.)); +#199944 = VECTOR('',#199945,1.); +#199945 = DIRECTION('',(0.,0.,-1.)); +#199946 = ORIENTED_EDGE('',*,*,#199947,.F.); +#199947 = EDGE_CURVE('',#199909,#199940,#199948,.T.); +#199948 = LINE('',#199949,#199950); +#199949 = CARTESIAN_POINT('',(144.251166,-79.630227,0.)); +#199950 = VECTOR('',#199951,1.); +#199951 = DIRECTION('',(0.700679943322,0.713475729809,0.)); +#199952 = PLANE('',#199953); +#199953 = AXIS2_PLACEMENT_3D('',#199954,#199955,#199956); +#199954 = CARTESIAN_POINT('',(144.251166,-79.630227,0.)); +#199955 = DIRECTION('',(0.713475729809,-0.700679943322,0.)); +#199956 = DIRECTION('',(0.700679943322,0.713475729809,0.)); +#199957 = ADVANCED_FACE('',(#199958),#199983,.F.); +#199958 = FACE_BOUND('',#199959,.F.); +#199959 = EDGE_LOOP('',(#199960,#199961,#199969,#199977)); +#199960 = ORIENTED_EDGE('',*,*,#199939,.T.); +#199961 = ORIENTED_EDGE('',*,*,#199962,.T.); +#199962 = EDGE_CURVE('',#199932,#199963,#199965,.T.); +#199963 = VERTEX_POINT('',#199964); +#199964 = CARTESIAN_POINT('',(144.401921,-78.980491,-3.5E-02)); +#199965 = LINE('',#199966,#199967); +#199966 = CARTESIAN_POINT('',(144.4,-79.478675,-3.5E-02)); +#199967 = VECTOR('',#199968,1.); +#199968 = DIRECTION('',(3.855976343445E-03,0.999992565696,0.)); +#199969 = ORIENTED_EDGE('',*,*,#199970,.F.); +#199970 = EDGE_CURVE('',#199971,#199963,#199973,.T.); +#199971 = VERTEX_POINT('',#199972); +#199972 = CARTESIAN_POINT('',(144.401921,-78.980491,0.)); +#199973 = LINE('',#199974,#199975); +#199974 = CARTESIAN_POINT('',(144.401921,-78.980491,0.)); +#199975 = VECTOR('',#199976,1.); +#199976 = DIRECTION('',(0.,0.,-1.)); +#199977 = ORIENTED_EDGE('',*,*,#199978,.F.); +#199978 = EDGE_CURVE('',#199940,#199971,#199979,.T.); +#199979 = LINE('',#199980,#199981); +#199980 = CARTESIAN_POINT('',(144.4,-79.478675,0.)); +#199981 = VECTOR('',#199982,1.); +#199982 = DIRECTION('',(3.855976343445E-03,0.999992565696,0.)); +#199983 = PLANE('',#199984); +#199984 = AXIS2_PLACEMENT_3D('',#199985,#199986,#199987); +#199985 = CARTESIAN_POINT('',(144.4,-79.478675,0.)); +#199986 = DIRECTION('',(0.999992565696,-3.855976343445E-03,0.)); +#199987 = DIRECTION('',(3.855976343445E-03,0.999992565696,0.)); +#199988 = ADVANCED_FACE('',(#199989),#200014,.F.); +#199989 = FACE_BOUND('',#199990,.F.); +#199990 = EDGE_LOOP('',(#199991,#199992,#200000,#200008)); +#199991 = ORIENTED_EDGE('',*,*,#199970,.T.); +#199992 = ORIENTED_EDGE('',*,*,#199993,.T.); +#199993 = EDGE_CURVE('',#199963,#199994,#199996,.T.); +#199994 = VERTEX_POINT('',#199995); +#199995 = CARTESIAN_POINT('',(144.416853,-78.944443,-3.5E-02)); +#199996 = LINE('',#199997,#199998); +#199997 = CARTESIAN_POINT('',(144.401921,-78.980491,-3.5E-02)); +#199998 = VECTOR('',#199999,1.); +#199999 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200000 = ORIENTED_EDGE('',*,*,#200001,.F.); +#200001 = EDGE_CURVE('',#200002,#199994,#200004,.T.); +#200002 = VERTEX_POINT('',#200003); +#200003 = CARTESIAN_POINT('',(144.416853,-78.944443,0.)); +#200004 = LINE('',#200005,#200006); +#200005 = CARTESIAN_POINT('',(144.416853,-78.944443,0.)); +#200006 = VECTOR('',#200007,1.); +#200007 = DIRECTION('',(0.,0.,-1.)); +#200008 = ORIENTED_EDGE('',*,*,#200009,.F.); +#200009 = EDGE_CURVE('',#199971,#200002,#200010,.T.); +#200010 = LINE('',#200011,#200012); +#200011 = CARTESIAN_POINT('',(144.401921,-78.980491,0.)); +#200012 = VECTOR('',#200013,1.); +#200013 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200014 = PLANE('',#200015); +#200015 = AXIS2_PLACEMENT_3D('',#200016,#200017,#200018); +#200016 = CARTESIAN_POINT('',(144.401921,-78.980491,0.)); +#200017 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#200018 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200019 = ADVANCED_FACE('',(#200020),#200045,.F.); +#200020 = FACE_BOUND('',#200021,.F.); +#200021 = EDGE_LOOP('',(#200022,#200023,#200031,#200039)); +#200022 = ORIENTED_EDGE('',*,*,#200001,.T.); +#200023 = ORIENTED_EDGE('',*,*,#200024,.T.); +#200024 = EDGE_CURVE('',#199994,#200025,#200027,.T.); +#200025 = VERTEX_POINT('',#200026); +#200026 = CARTESIAN_POINT('',(144.730499,-78.628078,-3.5E-02)); +#200027 = LINE('',#200028,#200029); +#200028 = CARTESIAN_POINT('',(144.416853,-78.944443,-3.5E-02)); +#200029 = VECTOR('',#200030,1.); +#200030 = DIRECTION('',(0.704048494583,0.710151897326,0.)); +#200031 = ORIENTED_EDGE('',*,*,#200032,.F.); +#200032 = EDGE_CURVE('',#200033,#200025,#200035,.T.); +#200033 = VERTEX_POINT('',#200034); +#200034 = CARTESIAN_POINT('',(144.730499,-78.628078,0.)); +#200035 = LINE('',#200036,#200037); +#200036 = CARTESIAN_POINT('',(144.730499,-78.628078,0.)); +#200037 = VECTOR('',#200038,1.); +#200038 = DIRECTION('',(0.,0.,-1.)); +#200039 = ORIENTED_EDGE('',*,*,#200040,.F.); +#200040 = EDGE_CURVE('',#200002,#200033,#200041,.T.); +#200041 = LINE('',#200042,#200043); +#200042 = CARTESIAN_POINT('',(144.416853,-78.944443,0.)); +#200043 = VECTOR('',#200044,1.); +#200044 = DIRECTION('',(0.704048494583,0.710151897326,0.)); +#200045 = PLANE('',#200046); +#200046 = AXIS2_PLACEMENT_3D('',#200047,#200048,#200049); +#200047 = CARTESIAN_POINT('',(144.416853,-78.944443,0.)); +#200048 = DIRECTION('',(0.710151897326,-0.704048494583,0.)); +#200049 = DIRECTION('',(0.704048494583,0.710151897326,0.)); +#200050 = ADVANCED_FACE('',(#200051),#200076,.F.); +#200051 = FACE_BOUND('',#200052,.F.); +#200052 = EDGE_LOOP('',(#200053,#200054,#200062,#200070)); +#200053 = ORIENTED_EDGE('',*,*,#200032,.T.); +#200054 = ORIENTED_EDGE('',*,*,#200055,.T.); +#200055 = EDGE_CURVE('',#200025,#200056,#200058,.T.); +#200056 = VERTEX_POINT('',#200057); +#200057 = CARTESIAN_POINT('',(144.722836,-78.614805,-3.5E-02)); +#200058 = LINE('',#200059,#200060); +#200059 = CARTESIAN_POINT('',(144.730499,-78.628078,-3.5E-02)); +#200060 = VECTOR('',#200061,1.); +#200061 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#200062 = ORIENTED_EDGE('',*,*,#200063,.F.); +#200063 = EDGE_CURVE('',#200064,#200056,#200066,.T.); +#200064 = VERTEX_POINT('',#200065); +#200065 = CARTESIAN_POINT('',(144.722836,-78.614805,0.)); +#200066 = LINE('',#200067,#200068); +#200067 = CARTESIAN_POINT('',(144.722836,-78.614805,0.)); +#200068 = VECTOR('',#200069,1.); +#200069 = DIRECTION('',(0.,0.,-1.)); +#200070 = ORIENTED_EDGE('',*,*,#200071,.F.); +#200071 = EDGE_CURVE('',#200033,#200064,#200072,.T.); +#200072 = LINE('',#200073,#200074); +#200073 = CARTESIAN_POINT('',(144.730499,-78.628078,0.)); +#200074 = VECTOR('',#200075,1.); +#200075 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#200076 = PLANE('',#200077); +#200077 = AXIS2_PLACEMENT_3D('',#200078,#200079,#200080); +#200078 = CARTESIAN_POINT('',(144.730499,-78.628078,0.)); +#200079 = DIRECTION('',(0.866030210228,0.499991674903,0.)); +#200080 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#200081 = ADVANCED_FACE('',(#200082),#200109,.T.); +#200082 = FACE_BOUND('',#200083,.F.); +#200083 = EDGE_LOOP('',(#200084,#200085,#200094,#200102)); +#200084 = ORIENTED_EDGE('',*,*,#200063,.T.); +#200085 = ORIENTED_EDGE('',*,*,#200086,.T.); +#200086 = EDGE_CURVE('',#200056,#200087,#200089,.T.); +#200087 = VERTEX_POINT('',#200088); +#200088 = CARTESIAN_POINT('',(144.885195,-78.777164,-3.5E-02)); +#200089 = CIRCLE('',#200090,0.300000118202); +#200090 = AXIS2_PLACEMENT_3D('',#200091,#200092,#200093); +#200091 = CARTESIAN_POINT('',(145.,-78.5,-3.5E-02)); +#200092 = DIRECTION('',(0.,0.,-1.)); +#200093 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#200094 = ORIENTED_EDGE('',*,*,#200095,.F.); +#200095 = EDGE_CURVE('',#200096,#200087,#200098,.T.); +#200096 = VERTEX_POINT('',#200097); +#200097 = CARTESIAN_POINT('',(144.885195,-78.777164,0.)); +#200098 = LINE('',#200099,#200100); +#200099 = CARTESIAN_POINT('',(144.885195,-78.777164,0.)); +#200100 = VECTOR('',#200101,1.); +#200101 = DIRECTION('',(0.,0.,-1.)); +#200102 = ORIENTED_EDGE('',*,*,#200103,.F.); +#200103 = EDGE_CURVE('',#200064,#200096,#200104,.T.); +#200104 = CIRCLE('',#200105,0.300000118202); +#200105 = AXIS2_PLACEMENT_3D('',#200106,#200107,#200108); +#200106 = CARTESIAN_POINT('',(145.,-78.5,0.)); +#200107 = DIRECTION('',(0.,0.,-1.)); +#200108 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#200109 = CYLINDRICAL_SURFACE('',#200110,0.300000118202); +#200110 = AXIS2_PLACEMENT_3D('',#200111,#200112,#200113); +#200111 = CARTESIAN_POINT('',(145.,-78.5,0.)); +#200112 = DIRECTION('',(-0.,-0.,1.)); +#200113 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#200114 = ADVANCED_FACE('',(#200115),#200131,.F.); +#200115 = FACE_BOUND('',#200116,.F.); +#200116 = EDGE_LOOP('',(#200117,#200118,#200124,#200125)); +#200117 = ORIENTED_EDGE('',*,*,#200095,.T.); +#200118 = ORIENTED_EDGE('',*,*,#200119,.T.); +#200119 = EDGE_CURVE('',#200087,#199333,#200120,.T.); +#200120 = LINE('',#200121,#200122); +#200121 = CARTESIAN_POINT('',(144.885195,-78.777164,-3.5E-02)); +#200122 = VECTOR('',#200123,1.); +#200123 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#200124 = ORIENTED_EDGE('',*,*,#199330,.F.); +#200125 = ORIENTED_EDGE('',*,*,#200126,.F.); +#200126 = EDGE_CURVE('',#200096,#199331,#200127,.T.); +#200127 = LINE('',#200128,#200129); +#200128 = CARTESIAN_POINT('',(144.885195,-78.777164,0.)); +#200129 = VECTOR('',#200130,1.); +#200130 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#200131 = PLANE('',#200132); +#200132 = AXIS2_PLACEMENT_3D('',#200133,#200134,#200135); +#200133 = CARTESIAN_POINT('',(144.885195,-78.777164,0.)); +#200134 = DIRECTION('',(0.500012356405,0.866018269693,0.)); +#200135 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#200136 = ADVANCED_FACE('',(#200137),#200164,.F.); +#200137 = FACE_BOUND('',#200138,.F.); +#200138 = EDGE_LOOP('',(#200139,#200149,#200156,#200157)); +#200139 = ORIENTED_EDGE('',*,*,#200140,.T.); +#200140 = EDGE_CURVE('',#200141,#200143,#200145,.T.); +#200141 = VERTEX_POINT('',#200142); +#200142 = CARTESIAN_POINT('',(144.137255,-87.,0.)); +#200143 = VERTEX_POINT('',#200144); +#200144 = CARTESIAN_POINT('',(144.137255,-87.,-3.5E-02)); +#200145 = LINE('',#200146,#200147); +#200146 = CARTESIAN_POINT('',(144.137255,-87.,0.)); +#200147 = VECTOR('',#200148,1.); +#200148 = DIRECTION('',(0.,0.,-1.)); +#200149 = ORIENTED_EDGE('',*,*,#200150,.T.); +#200150 = EDGE_CURVE('',#200143,#200143,#200151,.T.); +#200151 = CIRCLE('',#200152,0.137255); +#200152 = AXIS2_PLACEMENT_3D('',#200153,#200154,#200155); +#200153 = CARTESIAN_POINT('',(144.,-87.,-3.5E-02)); +#200154 = DIRECTION('',(0.,0.,1.)); +#200155 = DIRECTION('',(1.,0.,-0.)); +#200156 = ORIENTED_EDGE('',*,*,#200140,.F.); +#200157 = ORIENTED_EDGE('',*,*,#200158,.F.); +#200158 = EDGE_CURVE('',#200141,#200141,#200159,.T.); +#200159 = CIRCLE('',#200160,0.137255); +#200160 = AXIS2_PLACEMENT_3D('',#200161,#200162,#200163); +#200161 = CARTESIAN_POINT('',(144.,-87.,0.)); +#200162 = DIRECTION('',(0.,0.,1.)); +#200163 = DIRECTION('',(1.,0.,-0.)); +#200164 = CYLINDRICAL_SURFACE('',#200165,0.137255); +#200165 = AXIS2_PLACEMENT_3D('',#200166,#200167,#200168); +#200166 = CARTESIAN_POINT('',(144.,-87.,0.)); +#200167 = DIRECTION('',(0.,0.,1.)); +#200168 = DIRECTION('',(1.,0.,-0.)); +#200169 = ADVANCED_FACE('',(#200170),#200197,.F.); +#200170 = FACE_BOUND('',#200171,.F.); +#200171 = EDGE_LOOP('',(#200172,#200182,#200189,#200190)); +#200172 = ORIENTED_EDGE('',*,*,#200173,.T.); +#200173 = EDGE_CURVE('',#200174,#200176,#200178,.T.); +#200174 = VERTEX_POINT('',#200175); +#200175 = CARTESIAN_POINT('',(145.137255,-78.5,0.)); +#200176 = VERTEX_POINT('',#200177); +#200177 = CARTESIAN_POINT('',(145.137255,-78.5,-3.5E-02)); +#200178 = LINE('',#200179,#200180); +#200179 = CARTESIAN_POINT('',(145.137255,-78.5,0.)); +#200180 = VECTOR('',#200181,1.); +#200181 = DIRECTION('',(0.,0.,-1.)); +#200182 = ORIENTED_EDGE('',*,*,#200183,.T.); +#200183 = EDGE_CURVE('',#200176,#200176,#200184,.T.); +#200184 = CIRCLE('',#200185,0.137255); +#200185 = AXIS2_PLACEMENT_3D('',#200186,#200187,#200188); +#200186 = CARTESIAN_POINT('',(145.,-78.5,-3.5E-02)); +#200187 = DIRECTION('',(0.,0.,1.)); +#200188 = DIRECTION('',(1.,0.,-0.)); +#200189 = ORIENTED_EDGE('',*,*,#200173,.F.); +#200190 = ORIENTED_EDGE('',*,*,#200191,.F.); +#200191 = EDGE_CURVE('',#200174,#200174,#200192,.T.); +#200192 = CIRCLE('',#200193,0.137255); +#200193 = AXIS2_PLACEMENT_3D('',#200194,#200195,#200196); +#200194 = CARTESIAN_POINT('',(145.,-78.5,0.)); +#200195 = DIRECTION('',(0.,0.,1.)); +#200196 = DIRECTION('',(1.,0.,-0.)); +#200197 = CYLINDRICAL_SURFACE('',#200198,0.137255); +#200198 = AXIS2_PLACEMENT_3D('',#200199,#200200,#200201); +#200199 = CARTESIAN_POINT('',(145.,-78.5,0.)); +#200200 = DIRECTION('',(0.,0.,1.)); +#200201 = DIRECTION('',(1.,0.,-0.)); +#200202 = ADVANCED_FACE('',(#200203,#200231,#200234),#200237,.F.); +#200203 = FACE_BOUND('',#200204,.F.); +#200204 = EDGE_LOOP('',(#200205,#200206,#200207,#200208,#200209,#200210, + #200211,#200212,#200213,#200214,#200215,#200216,#200217,#200218, + #200219,#200220,#200221,#200222,#200223,#200224,#200225,#200226, + #200227,#200228,#200229,#200230)); +#200205 = ORIENTED_EDGE('',*,*,#199356,.T.); +#200206 = ORIENTED_EDGE('',*,*,#199387,.T.); +#200207 = ORIENTED_EDGE('',*,*,#199418,.T.); +#200208 = ORIENTED_EDGE('',*,*,#199449,.T.); +#200209 = ORIENTED_EDGE('',*,*,#199480,.T.); +#200210 = ORIENTED_EDGE('',*,*,#199511,.T.); +#200211 = ORIENTED_EDGE('',*,*,#199542,.T.); +#200212 = ORIENTED_EDGE('',*,*,#199573,.T.); +#200213 = ORIENTED_EDGE('',*,*,#199604,.T.); +#200214 = ORIENTED_EDGE('',*,*,#199635,.T.); +#200215 = ORIENTED_EDGE('',*,*,#199666,.T.); +#200216 = ORIENTED_EDGE('',*,*,#199698,.T.); +#200217 = ORIENTED_EDGE('',*,*,#199730,.T.); +#200218 = ORIENTED_EDGE('',*,*,#199761,.T.); +#200219 = ORIENTED_EDGE('',*,*,#199792,.T.); +#200220 = ORIENTED_EDGE('',*,*,#199823,.T.); +#200221 = ORIENTED_EDGE('',*,*,#199854,.T.); +#200222 = ORIENTED_EDGE('',*,*,#199885,.T.); +#200223 = ORIENTED_EDGE('',*,*,#199916,.T.); +#200224 = ORIENTED_EDGE('',*,*,#199947,.T.); +#200225 = ORIENTED_EDGE('',*,*,#199978,.T.); +#200226 = ORIENTED_EDGE('',*,*,#200009,.T.); +#200227 = ORIENTED_EDGE('',*,*,#200040,.T.); +#200228 = ORIENTED_EDGE('',*,*,#200071,.T.); +#200229 = ORIENTED_EDGE('',*,*,#200103,.T.); +#200230 = ORIENTED_EDGE('',*,*,#200126,.T.); +#200231 = FACE_BOUND('',#200232,.F.); +#200232 = EDGE_LOOP('',(#200233)); +#200233 = ORIENTED_EDGE('',*,*,#200158,.T.); +#200234 = FACE_BOUND('',#200235,.F.); +#200235 = EDGE_LOOP('',(#200236)); +#200236 = ORIENTED_EDGE('',*,*,#200191,.T.); +#200237 = PLANE('',#200238); +#200238 = AXIS2_PLACEMENT_3D('',#200239,#200240,#200241); +#200239 = CARTESIAN_POINT('',(0.,0.,0.)); +#200240 = DIRECTION('',(-0.,-0.,-1.)); +#200241 = DIRECTION('',(-1.,0.,0.)); +#200242 = ADVANCED_FACE('',(#200243,#200271,#200274),#200277,.T.); +#200243 = FACE_BOUND('',#200244,.T.); +#200244 = EDGE_LOOP('',(#200245,#200246,#200247,#200248,#200249,#200250, + #200251,#200252,#200253,#200254,#200255,#200256,#200257,#200258, + #200259,#200260,#200261,#200262,#200263,#200264,#200265,#200266, + #200267,#200268,#200269,#200270)); +#200245 = ORIENTED_EDGE('',*,*,#199340,.T.); +#200246 = ORIENTED_EDGE('',*,*,#199371,.T.); +#200247 = ORIENTED_EDGE('',*,*,#199402,.T.); +#200248 = ORIENTED_EDGE('',*,*,#199433,.T.); +#200249 = ORIENTED_EDGE('',*,*,#199464,.T.); +#200250 = ORIENTED_EDGE('',*,*,#199495,.T.); +#200251 = ORIENTED_EDGE('',*,*,#199526,.T.); +#200252 = ORIENTED_EDGE('',*,*,#199557,.T.); +#200253 = ORIENTED_EDGE('',*,*,#199588,.T.); +#200254 = ORIENTED_EDGE('',*,*,#199619,.T.); +#200255 = ORIENTED_EDGE('',*,*,#199650,.T.); +#200256 = ORIENTED_EDGE('',*,*,#199681,.T.); +#200257 = ORIENTED_EDGE('',*,*,#199714,.T.); +#200258 = ORIENTED_EDGE('',*,*,#199745,.T.); +#200259 = ORIENTED_EDGE('',*,*,#199776,.T.); +#200260 = ORIENTED_EDGE('',*,*,#199807,.T.); +#200261 = ORIENTED_EDGE('',*,*,#199838,.T.); +#200262 = ORIENTED_EDGE('',*,*,#199869,.T.); +#200263 = ORIENTED_EDGE('',*,*,#199900,.T.); +#200264 = ORIENTED_EDGE('',*,*,#199931,.T.); +#200265 = ORIENTED_EDGE('',*,*,#199962,.T.); +#200266 = ORIENTED_EDGE('',*,*,#199993,.T.); +#200267 = ORIENTED_EDGE('',*,*,#200024,.T.); +#200268 = ORIENTED_EDGE('',*,*,#200055,.T.); +#200269 = ORIENTED_EDGE('',*,*,#200086,.T.); +#200270 = ORIENTED_EDGE('',*,*,#200119,.T.); +#200271 = FACE_BOUND('',#200272,.T.); +#200272 = EDGE_LOOP('',(#200273)); +#200273 = ORIENTED_EDGE('',*,*,#200150,.T.); +#200274 = FACE_BOUND('',#200275,.T.); +#200275 = EDGE_LOOP('',(#200276)); +#200276 = ORIENTED_EDGE('',*,*,#200183,.T.); +#200277 = PLANE('',#200278); +#200278 = AXIS2_PLACEMENT_3D('',#200279,#200280,#200281); +#200279 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#200280 = DIRECTION('',(-0.,-0.,-1.)); +#200281 = DIRECTION('',(-1.,0.,0.)); +#200282 = MANIFOLD_SOLID_BREP('',#200283); +#200283 = CLOSED_SHELL('',(#200284,#200324,#200355,#200386,#200417, + #200448,#200479,#200510,#200541,#200572,#200603,#200634,#200665, + #200696,#200727,#200758,#200789,#200822,#200853,#200884,#200915, + #200946,#200977,#201008,#201039,#201070,#201101,#201132,#201163, + #201194,#201225,#201256,#201287,#201318,#201349,#201382,#201404, + #201437,#201484)); +#200284 = ADVANCED_FACE('',(#200285),#200319,.T.); +#200285 = FACE_BOUND('',#200286,.T.); +#200286 = EDGE_LOOP('',(#200287,#200297,#200305,#200313)); +#200287 = ORIENTED_EDGE('',*,*,#200288,.T.); +#200288 = EDGE_CURVE('',#200289,#200291,#200293,.T.); +#200289 = VERTEX_POINT('',#200290); +#200290 = CARTESIAN_POINT('',(148.6,-90.584073,1.51)); +#200291 = VERTEX_POINT('',#200292); +#200292 = CARTESIAN_POINT('',(148.6,-90.584073,1.545)); +#200293 = LINE('',#200294,#200295); +#200294 = CARTESIAN_POINT('',(148.6,-90.584073,1.51)); +#200295 = VECTOR('',#200296,1.); +#200296 = DIRECTION('',(0.,0.,1.)); +#200297 = ORIENTED_EDGE('',*,*,#200298,.T.); +#200298 = EDGE_CURVE('',#200291,#200299,#200301,.T.); +#200299 = VERTEX_POINT('',#200300); +#200300 = CARTESIAN_POINT('',(148.6,-91.110049,1.545)); +#200301 = LINE('',#200302,#200303); +#200302 = CARTESIAN_POINT('',(148.6,-90.584073,1.545)); +#200303 = VECTOR('',#200304,1.); +#200304 = DIRECTION('',(0.,-1.,0.)); +#200305 = ORIENTED_EDGE('',*,*,#200306,.F.); +#200306 = EDGE_CURVE('',#200307,#200299,#200309,.T.); +#200307 = VERTEX_POINT('',#200308); +#200308 = CARTESIAN_POINT('',(148.6,-91.110049,1.51)); +#200309 = LINE('',#200310,#200311); +#200310 = CARTESIAN_POINT('',(148.6,-91.110049,1.51)); +#200311 = VECTOR('',#200312,1.); +#200312 = DIRECTION('',(0.,0.,1.)); +#200313 = ORIENTED_EDGE('',*,*,#200314,.F.); +#200314 = EDGE_CURVE('',#200289,#200307,#200315,.T.); +#200315 = LINE('',#200316,#200317); +#200316 = CARTESIAN_POINT('',(148.6,-90.584073,1.51)); +#200317 = VECTOR('',#200318,1.); +#200318 = DIRECTION('',(0.,-1.,0.)); +#200319 = PLANE('',#200320); +#200320 = AXIS2_PLACEMENT_3D('',#200321,#200322,#200323); +#200321 = CARTESIAN_POINT('',(148.6,-90.584073,1.51)); +#200322 = DIRECTION('',(1.,0.,-0.)); +#200323 = DIRECTION('',(0.,-1.,0.)); +#200324 = ADVANCED_FACE('',(#200325),#200350,.T.); +#200325 = FACE_BOUND('',#200326,.T.); +#200326 = EDGE_LOOP('',(#200327,#200328,#200336,#200344)); +#200327 = ORIENTED_EDGE('',*,*,#200306,.T.); +#200328 = ORIENTED_EDGE('',*,*,#200329,.T.); +#200329 = EDGE_CURVE('',#200299,#200330,#200332,.T.); +#200330 = VERTEX_POINT('',#200331); +#200331 = CARTESIAN_POINT('',(149.193147,-91.705914,1.545)); +#200332 = LINE('',#200333,#200334); +#200333 = CARTESIAN_POINT('',(148.6,-91.110049,1.545)); +#200334 = VECTOR('',#200335,1.); +#200335 = DIRECTION('',(0.705488540256,-0.708721327157,0.)); +#200336 = ORIENTED_EDGE('',*,*,#200337,.F.); +#200337 = EDGE_CURVE('',#200338,#200330,#200340,.T.); +#200338 = VERTEX_POINT('',#200339); +#200339 = CARTESIAN_POINT('',(149.193147,-91.705914,1.51)); +#200340 = LINE('',#200341,#200342); +#200341 = CARTESIAN_POINT('',(149.193147,-91.705914,1.51)); +#200342 = VECTOR('',#200343,1.); +#200343 = DIRECTION('',(0.,0.,1.)); +#200344 = ORIENTED_EDGE('',*,*,#200345,.F.); +#200345 = EDGE_CURVE('',#200307,#200338,#200346,.T.); +#200346 = LINE('',#200347,#200348); +#200347 = CARTESIAN_POINT('',(148.6,-91.110049,1.51)); +#200348 = VECTOR('',#200349,1.); +#200349 = DIRECTION('',(0.705488540256,-0.708721327157,0.)); +#200350 = PLANE('',#200351); +#200351 = AXIS2_PLACEMENT_3D('',#200352,#200353,#200354); +#200352 = CARTESIAN_POINT('',(148.6,-91.110049,1.51)); +#200353 = DIRECTION('',(0.708721327157,0.705488540256,-0.)); +#200354 = DIRECTION('',(0.705488540256,-0.708721327157,0.)); +#200355 = ADVANCED_FACE('',(#200356),#200381,.T.); +#200356 = FACE_BOUND('',#200357,.T.); +#200357 = EDGE_LOOP('',(#200358,#200359,#200367,#200375)); +#200358 = ORIENTED_EDGE('',*,*,#200337,.T.); +#200359 = ORIENTED_EDGE('',*,*,#200360,.T.); +#200360 = EDGE_CURVE('',#200330,#200361,#200363,.T.); +#200361 = VERTEX_POINT('',#200362); +#200362 = CARTESIAN_POINT('',(149.208079,-91.741962,1.545)); +#200363 = LINE('',#200364,#200365); +#200364 = CARTESIAN_POINT('',(149.193147,-91.705914,1.545)); +#200365 = VECTOR('',#200366,1.); +#200366 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#200367 = ORIENTED_EDGE('',*,*,#200368,.F.); +#200368 = EDGE_CURVE('',#200369,#200361,#200371,.T.); +#200369 = VERTEX_POINT('',#200370); +#200370 = CARTESIAN_POINT('',(149.208079,-91.741962,1.51)); +#200371 = LINE('',#200372,#200373); +#200372 = CARTESIAN_POINT('',(149.208079,-91.741962,1.51)); +#200373 = VECTOR('',#200374,1.); +#200374 = DIRECTION('',(0.,0.,1.)); +#200375 = ORIENTED_EDGE('',*,*,#200376,.F.); +#200376 = EDGE_CURVE('',#200338,#200369,#200377,.T.); +#200377 = LINE('',#200378,#200379); +#200378 = CARTESIAN_POINT('',(149.193147,-91.705914,1.51)); +#200379 = VECTOR('',#200380,1.); +#200380 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#200381 = PLANE('',#200382); +#200382 = AXIS2_PLACEMENT_3D('',#200383,#200384,#200385); +#200383 = CARTESIAN_POINT('',(149.193147,-91.705914,1.51)); +#200384 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#200385 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#200386 = ADVANCED_FACE('',(#200387),#200412,.T.); +#200387 = FACE_BOUND('',#200388,.T.); +#200388 = EDGE_LOOP('',(#200389,#200390,#200398,#200406)); +#200389 = ORIENTED_EDGE('',*,*,#200368,.T.); +#200390 = ORIENTED_EDGE('',*,*,#200391,.T.); +#200391 = EDGE_CURVE('',#200361,#200392,#200394,.T.); +#200392 = VERTEX_POINT('',#200393); +#200393 = CARTESIAN_POINT('',(149.208079,-98.843823,1.545)); +#200394 = LINE('',#200395,#200396); +#200395 = CARTESIAN_POINT('',(149.208079,-91.741962,1.545)); +#200396 = VECTOR('',#200397,1.); +#200397 = DIRECTION('',(0.,-1.,0.)); +#200398 = ORIENTED_EDGE('',*,*,#200399,.F.); +#200399 = EDGE_CURVE('',#200400,#200392,#200402,.T.); +#200400 = VERTEX_POINT('',#200401); +#200401 = CARTESIAN_POINT('',(149.208079,-98.843823,1.51)); +#200402 = LINE('',#200403,#200404); +#200403 = CARTESIAN_POINT('',(149.208079,-98.843823,1.51)); +#200404 = VECTOR('',#200405,1.); +#200405 = DIRECTION('',(0.,0.,1.)); +#200406 = ORIENTED_EDGE('',*,*,#200407,.F.); +#200407 = EDGE_CURVE('',#200369,#200400,#200408,.T.); +#200408 = LINE('',#200409,#200410); +#200409 = CARTESIAN_POINT('',(149.208079,-91.741962,1.51)); +#200410 = VECTOR('',#200411,1.); +#200411 = DIRECTION('',(0.,-1.,0.)); +#200412 = PLANE('',#200413); +#200413 = AXIS2_PLACEMENT_3D('',#200414,#200415,#200416); +#200414 = CARTESIAN_POINT('',(149.208079,-91.741962,1.51)); +#200415 = DIRECTION('',(1.,0.,-0.)); +#200416 = DIRECTION('',(0.,-1.,0.)); +#200417 = ADVANCED_FACE('',(#200418),#200443,.T.); +#200418 = FACE_BOUND('',#200419,.T.); +#200419 = EDGE_LOOP('',(#200420,#200421,#200429,#200437)); +#200420 = ORIENTED_EDGE('',*,*,#200399,.T.); +#200421 = ORIENTED_EDGE('',*,*,#200422,.T.); +#200422 = EDGE_CURVE('',#200392,#200423,#200425,.T.); +#200423 = VERTEX_POINT('',#200424); +#200424 = CARTESIAN_POINT('',(149.193147,-98.879871,1.545)); +#200425 = LINE('',#200426,#200427); +#200426 = CARTESIAN_POINT('',(149.208079,-98.843823,1.545)); +#200427 = VECTOR('',#200428,1.); +#200428 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200429 = ORIENTED_EDGE('',*,*,#200430,.F.); +#200430 = EDGE_CURVE('',#200431,#200423,#200433,.T.); +#200431 = VERTEX_POINT('',#200432); +#200432 = CARTESIAN_POINT('',(149.193147,-98.879871,1.51)); +#200433 = LINE('',#200434,#200435); +#200434 = CARTESIAN_POINT('',(149.193147,-98.879871,1.51)); +#200435 = VECTOR('',#200436,1.); +#200436 = DIRECTION('',(0.,0.,1.)); +#200437 = ORIENTED_EDGE('',*,*,#200438,.F.); +#200438 = EDGE_CURVE('',#200400,#200431,#200439,.T.); +#200439 = LINE('',#200440,#200441); +#200440 = CARTESIAN_POINT('',(149.208079,-98.843823,1.51)); +#200441 = VECTOR('',#200442,1.); +#200442 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200443 = PLANE('',#200444); +#200444 = AXIS2_PLACEMENT_3D('',#200445,#200446,#200447); +#200445 = CARTESIAN_POINT('',(149.208079,-98.843823,1.51)); +#200446 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#200447 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200448 = ADVANCED_FACE('',(#200449),#200474,.T.); +#200449 = FACE_BOUND('',#200450,.T.); +#200450 = EDGE_LOOP('',(#200451,#200452,#200460,#200468)); +#200451 = ORIENTED_EDGE('',*,*,#200430,.T.); +#200452 = ORIENTED_EDGE('',*,*,#200453,.T.); +#200453 = EDGE_CURVE('',#200423,#200454,#200456,.T.); +#200454 = VERTEX_POINT('',#200455); +#200455 = CARTESIAN_POINT('',(147.95,-100.125736,1.545)); +#200456 = LINE('',#200457,#200458); +#200457 = CARTESIAN_POINT('',(149.193147,-98.879871,1.545)); +#200458 = VECTOR('',#200459,1.); +#200459 = DIRECTION('',(-0.706334199757,-0.707878519419,0.)); +#200460 = ORIENTED_EDGE('',*,*,#200461,.F.); +#200461 = EDGE_CURVE('',#200462,#200454,#200464,.T.); +#200462 = VERTEX_POINT('',#200463); +#200463 = CARTESIAN_POINT('',(147.95,-100.125736,1.51)); +#200464 = LINE('',#200465,#200466); +#200465 = CARTESIAN_POINT('',(147.95,-100.125736,1.51)); +#200466 = VECTOR('',#200467,1.); +#200467 = DIRECTION('',(0.,0.,1.)); +#200468 = ORIENTED_EDGE('',*,*,#200469,.F.); +#200469 = EDGE_CURVE('',#200431,#200462,#200470,.T.); +#200470 = LINE('',#200471,#200472); +#200471 = CARTESIAN_POINT('',(149.193147,-98.879871,1.51)); +#200472 = VECTOR('',#200473,1.); +#200473 = DIRECTION('',(-0.706334199757,-0.707878519419,0.)); +#200474 = PLANE('',#200475); +#200475 = AXIS2_PLACEMENT_3D('',#200476,#200477,#200478); +#200476 = CARTESIAN_POINT('',(149.193147,-98.879871,1.51)); +#200477 = DIRECTION('',(0.707878519419,-0.706334199757,0.)); +#200478 = DIRECTION('',(-0.706334199757,-0.707878519419,0.)); +#200479 = ADVANCED_FACE('',(#200480),#200505,.T.); +#200480 = FACE_BOUND('',#200481,.T.); +#200481 = EDGE_LOOP('',(#200482,#200483,#200491,#200499)); +#200482 = ORIENTED_EDGE('',*,*,#200461,.T.); +#200483 = ORIENTED_EDGE('',*,*,#200484,.T.); +#200484 = EDGE_CURVE('',#200454,#200485,#200487,.T.); +#200485 = VERTEX_POINT('',#200486); +#200486 = CARTESIAN_POINT('',(147.95,-106.710049,1.545)); +#200487 = LINE('',#200488,#200489); +#200488 = CARTESIAN_POINT('',(147.95,-100.125736,1.545)); +#200489 = VECTOR('',#200490,1.); +#200490 = DIRECTION('',(0.,-1.,0.)); +#200491 = ORIENTED_EDGE('',*,*,#200492,.F.); +#200492 = EDGE_CURVE('',#200493,#200485,#200495,.T.); +#200493 = VERTEX_POINT('',#200494); +#200494 = CARTESIAN_POINT('',(147.95,-106.710049,1.51)); +#200495 = LINE('',#200496,#200497); +#200496 = CARTESIAN_POINT('',(147.95,-106.710049,1.51)); +#200497 = VECTOR('',#200498,1.); +#200498 = DIRECTION('',(0.,0.,1.)); +#200499 = ORIENTED_EDGE('',*,*,#200500,.F.); +#200500 = EDGE_CURVE('',#200462,#200493,#200501,.T.); +#200501 = LINE('',#200502,#200503); +#200502 = CARTESIAN_POINT('',(147.95,-100.125736,1.51)); +#200503 = VECTOR('',#200504,1.); +#200504 = DIRECTION('',(0.,-1.,0.)); +#200505 = PLANE('',#200506); +#200506 = AXIS2_PLACEMENT_3D('',#200507,#200508,#200509); +#200507 = CARTESIAN_POINT('',(147.95,-100.125736,1.51)); +#200508 = DIRECTION('',(1.,0.,-0.)); +#200509 = DIRECTION('',(0.,-1.,0.)); +#200510 = ADVANCED_FACE('',(#200511),#200536,.T.); +#200511 = FACE_BOUND('',#200512,.T.); +#200512 = EDGE_LOOP('',(#200513,#200514,#200522,#200530)); +#200513 = ORIENTED_EDGE('',*,*,#200492,.T.); +#200514 = ORIENTED_EDGE('',*,*,#200515,.T.); +#200515 = EDGE_CURVE('',#200485,#200516,#200518,.T.); +#200516 = VERTEX_POINT('',#200517); +#200517 = CARTESIAN_POINT('',(153.433148,-112.195914,1.545)); +#200518 = LINE('',#200519,#200520); +#200519 = CARTESIAN_POINT('',(147.95,-106.710049,1.545)); +#200520 = VECTOR('',#200521,1.); +#200521 = DIRECTION('',(0.706931610731,-0.707281908258,0.)); +#200522 = ORIENTED_EDGE('',*,*,#200523,.F.); +#200523 = EDGE_CURVE('',#200524,#200516,#200526,.T.); +#200524 = VERTEX_POINT('',#200525); +#200525 = CARTESIAN_POINT('',(153.433148,-112.195914,1.51)); +#200526 = LINE('',#200527,#200528); +#200527 = CARTESIAN_POINT('',(153.433148,-112.195914,1.51)); +#200528 = VECTOR('',#200529,1.); +#200529 = DIRECTION('',(0.,0.,1.)); +#200530 = ORIENTED_EDGE('',*,*,#200531,.F.); +#200531 = EDGE_CURVE('',#200493,#200524,#200532,.T.); +#200532 = LINE('',#200533,#200534); +#200533 = CARTESIAN_POINT('',(147.95,-106.710049,1.51)); +#200534 = VECTOR('',#200535,1.); +#200535 = DIRECTION('',(0.706931610731,-0.707281908258,0.)); +#200536 = PLANE('',#200537); +#200537 = AXIS2_PLACEMENT_3D('',#200538,#200539,#200540); +#200538 = CARTESIAN_POINT('',(147.95,-106.710049,1.51)); +#200539 = DIRECTION('',(0.707281908258,0.706931610731,-0.)); +#200540 = DIRECTION('',(0.706931610731,-0.707281908258,0.)); +#200541 = ADVANCED_FACE('',(#200542),#200567,.T.); +#200542 = FACE_BOUND('',#200543,.T.); +#200543 = EDGE_LOOP('',(#200544,#200545,#200553,#200561)); +#200544 = ORIENTED_EDGE('',*,*,#200523,.T.); +#200545 = ORIENTED_EDGE('',*,*,#200546,.T.); +#200546 = EDGE_CURVE('',#200516,#200547,#200549,.T.); +#200547 = VERTEX_POINT('',#200548); +#200548 = CARTESIAN_POINT('',(153.448079,-112.231962,1.545)); +#200549 = LINE('',#200550,#200551); +#200550 = CARTESIAN_POINT('',(153.433148,-112.195914,1.545)); +#200551 = VECTOR('',#200552,1.); +#200552 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#200553 = ORIENTED_EDGE('',*,*,#200554,.F.); +#200554 = EDGE_CURVE('',#200555,#200547,#200557,.T.); +#200555 = VERTEX_POINT('',#200556); +#200556 = CARTESIAN_POINT('',(153.448079,-112.231962,1.51)); +#200557 = LINE('',#200558,#200559); +#200558 = CARTESIAN_POINT('',(153.448079,-112.231962,1.51)); +#200559 = VECTOR('',#200560,1.); +#200560 = DIRECTION('',(0.,0.,1.)); +#200561 = ORIENTED_EDGE('',*,*,#200562,.F.); +#200562 = EDGE_CURVE('',#200524,#200555,#200563,.T.); +#200563 = LINE('',#200564,#200565); +#200564 = CARTESIAN_POINT('',(153.433148,-112.195914,1.51)); +#200565 = VECTOR('',#200566,1.); +#200566 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#200567 = PLANE('',#200568); +#200568 = AXIS2_PLACEMENT_3D('',#200569,#200570,#200571); +#200569 = CARTESIAN_POINT('',(153.433148,-112.195914,1.51)); +#200570 = DIRECTION('',(0.923884701879,0.382670952169,-0.)); +#200571 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#200572 = ADVANCED_FACE('',(#200573),#200598,.T.); +#200573 = FACE_BOUND('',#200574,.T.); +#200574 = EDGE_LOOP('',(#200575,#200576,#200584,#200592)); +#200575 = ORIENTED_EDGE('',*,*,#200554,.T.); +#200576 = ORIENTED_EDGE('',*,*,#200577,.T.); +#200577 = EDGE_CURVE('',#200547,#200578,#200580,.T.); +#200578 = VERTEX_POINT('',#200579); +#200579 = CARTESIAN_POINT('',(153.448079,-112.768038,1.545)); +#200580 = LINE('',#200581,#200582); +#200581 = CARTESIAN_POINT('',(153.448079,-112.231962,1.545)); +#200582 = VECTOR('',#200583,1.); +#200583 = DIRECTION('',(0.,-1.,0.)); +#200584 = ORIENTED_EDGE('',*,*,#200585,.F.); +#200585 = EDGE_CURVE('',#200586,#200578,#200588,.T.); +#200586 = VERTEX_POINT('',#200587); +#200587 = CARTESIAN_POINT('',(153.448079,-112.768038,1.51)); +#200588 = LINE('',#200589,#200590); +#200589 = CARTESIAN_POINT('',(153.448079,-112.768038,1.51)); +#200590 = VECTOR('',#200591,1.); +#200591 = DIRECTION('',(0.,0.,1.)); +#200592 = ORIENTED_EDGE('',*,*,#200593,.F.); +#200593 = EDGE_CURVE('',#200555,#200586,#200594,.T.); +#200594 = LINE('',#200595,#200596); +#200595 = CARTESIAN_POINT('',(153.448079,-112.231962,1.51)); +#200596 = VECTOR('',#200597,1.); +#200597 = DIRECTION('',(0.,-1.,0.)); +#200598 = PLANE('',#200599); +#200599 = AXIS2_PLACEMENT_3D('',#200600,#200601,#200602); +#200600 = CARTESIAN_POINT('',(153.448079,-112.231962,1.51)); +#200601 = DIRECTION('',(1.,0.,-0.)); +#200602 = DIRECTION('',(0.,-1.,0.)); +#200603 = ADVANCED_FACE('',(#200604),#200629,.T.); +#200604 = FACE_BOUND('',#200605,.T.); +#200605 = EDGE_LOOP('',(#200606,#200607,#200615,#200623)); +#200606 = ORIENTED_EDGE('',*,*,#200585,.T.); +#200607 = ORIENTED_EDGE('',*,*,#200608,.T.); +#200608 = EDGE_CURVE('',#200578,#200609,#200611,.T.); +#200609 = VERTEX_POINT('',#200610); +#200610 = CARTESIAN_POINT('',(153.433147,-112.804086,1.545)); +#200611 = LINE('',#200612,#200613); +#200612 = CARTESIAN_POINT('',(153.448079,-112.768038,1.545)); +#200613 = VECTOR('',#200614,1.); +#200614 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200615 = ORIENTED_EDGE('',*,*,#200616,.F.); +#200616 = EDGE_CURVE('',#200617,#200609,#200619,.T.); +#200617 = VERTEX_POINT('',#200618); +#200618 = CARTESIAN_POINT('',(153.433147,-112.804086,1.51)); +#200619 = LINE('',#200620,#200621); +#200620 = CARTESIAN_POINT('',(153.433147,-112.804086,1.51)); +#200621 = VECTOR('',#200622,1.); +#200622 = DIRECTION('',(0.,0.,1.)); +#200623 = ORIENTED_EDGE('',*,*,#200624,.F.); +#200624 = EDGE_CURVE('',#200586,#200617,#200625,.T.); +#200625 = LINE('',#200626,#200627); +#200626 = CARTESIAN_POINT('',(153.448079,-112.768038,1.51)); +#200627 = VECTOR('',#200628,1.); +#200628 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200629 = PLANE('',#200630); +#200630 = AXIS2_PLACEMENT_3D('',#200631,#200632,#200633); +#200631 = CARTESIAN_POINT('',(153.448079,-112.768038,1.51)); +#200632 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#200633 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#200634 = ADVANCED_FACE('',(#200635),#200660,.T.); +#200635 = FACE_BOUND('',#200636,.T.); +#200636 = EDGE_LOOP('',(#200637,#200638,#200646,#200654)); +#200637 = ORIENTED_EDGE('',*,*,#200616,.T.); +#200638 = ORIENTED_EDGE('',*,*,#200639,.T.); +#200639 = EDGE_CURVE('',#200609,#200640,#200642,.T.); +#200640 = VERTEX_POINT('',#200641); +#200641 = CARTESIAN_POINT('',(147.754086,-118.483147,1.545)); +#200642 = LINE('',#200643,#200644); +#200643 = CARTESIAN_POINT('',(153.433147,-112.804086,1.545)); +#200644 = VECTOR('',#200645,1.); +#200645 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200646 = ORIENTED_EDGE('',*,*,#200647,.F.); +#200647 = EDGE_CURVE('',#200648,#200640,#200650,.T.); +#200648 = VERTEX_POINT('',#200649); +#200649 = CARTESIAN_POINT('',(147.754086,-118.483147,1.51)); +#200650 = LINE('',#200651,#200652); +#200651 = CARTESIAN_POINT('',(147.754086,-118.483147,1.51)); +#200652 = VECTOR('',#200653,1.); +#200653 = DIRECTION('',(0.,0.,1.)); +#200654 = ORIENTED_EDGE('',*,*,#200655,.F.); +#200655 = EDGE_CURVE('',#200617,#200648,#200656,.T.); +#200656 = LINE('',#200657,#200658); +#200657 = CARTESIAN_POINT('',(153.433147,-112.804086,1.51)); +#200658 = VECTOR('',#200659,1.); +#200659 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200660 = PLANE('',#200661); +#200661 = AXIS2_PLACEMENT_3D('',#200662,#200663,#200664); +#200662 = CARTESIAN_POINT('',(153.433147,-112.804086,1.51)); +#200663 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#200664 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200665 = ADVANCED_FACE('',(#200666),#200691,.T.); +#200666 = FACE_BOUND('',#200667,.T.); +#200667 = EDGE_LOOP('',(#200668,#200669,#200677,#200685)); +#200668 = ORIENTED_EDGE('',*,*,#200647,.T.); +#200669 = ORIENTED_EDGE('',*,*,#200670,.T.); +#200670 = EDGE_CURVE('',#200640,#200671,#200673,.T.); +#200671 = VERTEX_POINT('',#200672); +#200672 = CARTESIAN_POINT('',(147.718038,-118.498079,1.545)); +#200673 = LINE('',#200674,#200675); +#200674 = CARTESIAN_POINT('',(147.754086,-118.483147,1.545)); +#200675 = VECTOR('',#200676,1.); +#200676 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#200677 = ORIENTED_EDGE('',*,*,#200678,.F.); +#200678 = EDGE_CURVE('',#200679,#200671,#200681,.T.); +#200679 = VERTEX_POINT('',#200680); +#200680 = CARTESIAN_POINT('',(147.718038,-118.498079,1.51)); +#200681 = LINE('',#200682,#200683); +#200682 = CARTESIAN_POINT('',(147.718038,-118.498079,1.51)); +#200683 = VECTOR('',#200684,1.); +#200684 = DIRECTION('',(0.,0.,1.)); +#200685 = ORIENTED_EDGE('',*,*,#200686,.F.); +#200686 = EDGE_CURVE('',#200648,#200679,#200687,.T.); +#200687 = LINE('',#200688,#200689); +#200688 = CARTESIAN_POINT('',(147.754086,-118.483147,1.51)); +#200689 = VECTOR('',#200690,1.); +#200690 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#200691 = PLANE('',#200692); +#200692 = AXIS2_PLACEMENT_3D('',#200693,#200694,#200695); +#200693 = CARTESIAN_POINT('',(147.754086,-118.483147,1.51)); +#200694 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#200695 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#200696 = ADVANCED_FACE('',(#200697),#200722,.T.); +#200697 = FACE_BOUND('',#200698,.T.); +#200698 = EDGE_LOOP('',(#200699,#200700,#200708,#200716)); +#200699 = ORIENTED_EDGE('',*,*,#200678,.T.); +#200700 = ORIENTED_EDGE('',*,*,#200701,.T.); +#200701 = EDGE_CURVE('',#200671,#200702,#200704,.T.); +#200702 = VERTEX_POINT('',#200703); +#200703 = CARTESIAN_POINT('',(146.641422,-118.5,1.545)); +#200704 = LINE('',#200705,#200706); +#200705 = CARTESIAN_POINT('',(147.718038,-118.498079,1.545)); +#200706 = VECTOR('',#200707,1.); +#200707 = DIRECTION('',(-0.99999840815,-1.784291652783E-03,0.)); +#200708 = ORIENTED_EDGE('',*,*,#200709,.F.); +#200709 = EDGE_CURVE('',#200710,#200702,#200712,.T.); +#200710 = VERTEX_POINT('',#200711); +#200711 = CARTESIAN_POINT('',(146.641422,-118.5,1.51)); +#200712 = LINE('',#200713,#200714); +#200713 = CARTESIAN_POINT('',(146.641422,-118.5,1.51)); +#200714 = VECTOR('',#200715,1.); +#200715 = DIRECTION('',(0.,0.,1.)); +#200716 = ORIENTED_EDGE('',*,*,#200717,.F.); +#200717 = EDGE_CURVE('',#200679,#200710,#200718,.T.); +#200718 = LINE('',#200719,#200720); +#200719 = CARTESIAN_POINT('',(147.718038,-118.498079,1.51)); +#200720 = VECTOR('',#200721,1.); +#200721 = DIRECTION('',(-0.99999840815,-1.784291652783E-03,0.)); +#200722 = PLANE('',#200723); +#200723 = AXIS2_PLACEMENT_3D('',#200724,#200725,#200726); +#200724 = CARTESIAN_POINT('',(147.718038,-118.498079,1.51)); +#200725 = DIRECTION('',(1.784291652783E-03,-0.99999840815,0.)); +#200726 = DIRECTION('',(-0.99999840815,-1.784291652783E-03,0.)); +#200727 = ADVANCED_FACE('',(#200728),#200753,.T.); +#200728 = FACE_BOUND('',#200729,.T.); +#200729 = EDGE_LOOP('',(#200730,#200731,#200739,#200747)); +#200730 = ORIENTED_EDGE('',*,*,#200709,.T.); +#200731 = ORIENTED_EDGE('',*,*,#200732,.T.); +#200732 = EDGE_CURVE('',#200702,#200733,#200735,.T.); +#200733 = VERTEX_POINT('',#200734); +#200734 = CARTESIAN_POINT('',(144.85,-120.291422,1.545)); +#200735 = LINE('',#200736,#200737); +#200736 = CARTESIAN_POINT('',(146.641422,-118.5,1.545)); +#200737 = VECTOR('',#200738,1.); +#200738 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200739 = ORIENTED_EDGE('',*,*,#200740,.F.); +#200740 = EDGE_CURVE('',#200741,#200733,#200743,.T.); +#200741 = VERTEX_POINT('',#200742); +#200742 = CARTESIAN_POINT('',(144.85,-120.291422,1.51)); +#200743 = LINE('',#200744,#200745); +#200744 = CARTESIAN_POINT('',(144.85,-120.291422,1.51)); +#200745 = VECTOR('',#200746,1.); +#200746 = DIRECTION('',(0.,0.,1.)); +#200747 = ORIENTED_EDGE('',*,*,#200748,.F.); +#200748 = EDGE_CURVE('',#200710,#200741,#200749,.T.); +#200749 = LINE('',#200750,#200751); +#200750 = CARTESIAN_POINT('',(146.641422,-118.5,1.51)); +#200751 = VECTOR('',#200752,1.); +#200752 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200753 = PLANE('',#200754); +#200754 = AXIS2_PLACEMENT_3D('',#200755,#200756,#200757); +#200755 = CARTESIAN_POINT('',(146.641422,-118.5,1.51)); +#200756 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#200757 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#200758 = ADVANCED_FACE('',(#200759),#200784,.T.); +#200759 = FACE_BOUND('',#200760,.T.); +#200760 = EDGE_LOOP('',(#200761,#200762,#200770,#200778)); +#200761 = ORIENTED_EDGE('',*,*,#200740,.T.); +#200762 = ORIENTED_EDGE('',*,*,#200763,.T.); +#200763 = EDGE_CURVE('',#200733,#200764,#200766,.T.); +#200764 = VERTEX_POINT('',#200765); +#200765 = CARTESIAN_POINT('',(144.848079,-121.269509,1.545)); +#200766 = LINE('',#200767,#200768); +#200767 = CARTESIAN_POINT('',(144.85,-120.291422,1.545)); +#200768 = VECTOR('',#200769,1.); +#200769 = DIRECTION('',(-1.964034175811E-03,-0.999998071283,0.)); +#200770 = ORIENTED_EDGE('',*,*,#200771,.F.); +#200771 = EDGE_CURVE('',#200772,#200764,#200774,.T.); +#200772 = VERTEX_POINT('',#200773); +#200773 = CARTESIAN_POINT('',(144.848079,-121.269509,1.51)); +#200774 = LINE('',#200775,#200776); +#200775 = CARTESIAN_POINT('',(144.848079,-121.269509,1.51)); +#200776 = VECTOR('',#200777,1.); +#200777 = DIRECTION('',(0.,0.,1.)); +#200778 = ORIENTED_EDGE('',*,*,#200779,.F.); +#200779 = EDGE_CURVE('',#200741,#200772,#200780,.T.); +#200780 = LINE('',#200781,#200782); +#200781 = CARTESIAN_POINT('',(144.85,-120.291422,1.51)); +#200782 = VECTOR('',#200783,1.); +#200783 = DIRECTION('',(-1.964034175811E-03,-0.999998071283,0.)); +#200784 = PLANE('',#200785); +#200785 = AXIS2_PLACEMENT_3D('',#200786,#200787,#200788); +#200786 = CARTESIAN_POINT('',(144.85,-120.291422,1.51)); +#200787 = DIRECTION('',(0.999998071283,-1.964034175811E-03,0.)); +#200788 = DIRECTION('',(-1.964034175811E-03,-0.999998071283,0.)); +#200789 = ADVANCED_FACE('',(#200790),#200817,.T.); +#200790 = FACE_BOUND('',#200791,.T.); +#200791 = EDGE_LOOP('',(#200792,#200793,#200802,#200810)); +#200792 = ORIENTED_EDGE('',*,*,#200771,.T.); +#200793 = ORIENTED_EDGE('',*,*,#200794,.T.); +#200794 = EDGE_CURVE('',#200764,#200795,#200797,.T.); +#200795 = VERTEX_POINT('',#200796); +#200796 = CARTESIAN_POINT('',(144.651921,-121.269509,1.545)); +#200797 = CIRCLE('',#200798,0.100000456609); +#200798 = AXIS2_PLACEMENT_3D('',#200799,#200800,#200801); +#200799 = CARTESIAN_POINT('',(144.75,-121.25,1.545)); +#200800 = DIRECTION('',(-0.,0.,-1.)); +#200801 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#200802 = ORIENTED_EDGE('',*,*,#200803,.F.); +#200803 = EDGE_CURVE('',#200804,#200795,#200806,.T.); +#200804 = VERTEX_POINT('',#200805); +#200805 = CARTESIAN_POINT('',(144.651921,-121.269509,1.51)); +#200806 = LINE('',#200807,#200808); +#200807 = CARTESIAN_POINT('',(144.651921,-121.269509,1.51)); +#200808 = VECTOR('',#200809,1.); +#200809 = DIRECTION('',(0.,0.,1.)); +#200810 = ORIENTED_EDGE('',*,*,#200811,.F.); +#200811 = EDGE_CURVE('',#200772,#200804,#200812,.T.); +#200812 = CIRCLE('',#200813,0.100000456609); +#200813 = AXIS2_PLACEMENT_3D('',#200814,#200815,#200816); +#200814 = CARTESIAN_POINT('',(144.75,-121.25,1.51)); +#200815 = DIRECTION('',(-0.,0.,-1.)); +#200816 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#200817 = CYLINDRICAL_SURFACE('',#200818,0.100000456609); +#200818 = AXIS2_PLACEMENT_3D('',#200819,#200820,#200821); +#200819 = CARTESIAN_POINT('',(144.75,-121.25,1.51)); +#200820 = DIRECTION('',(-0.,0.,-1.)); +#200821 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#200822 = ADVANCED_FACE('',(#200823),#200848,.T.); +#200823 = FACE_BOUND('',#200824,.T.); +#200824 = EDGE_LOOP('',(#200825,#200826,#200834,#200842)); +#200825 = ORIENTED_EDGE('',*,*,#200803,.T.); +#200826 = ORIENTED_EDGE('',*,*,#200827,.T.); +#200827 = EDGE_CURVE('',#200795,#200828,#200830,.T.); +#200828 = VERTEX_POINT('',#200829); +#200829 = CARTESIAN_POINT('',(144.651921,-120.230491,1.545)); +#200830 = LINE('',#200831,#200832); +#200831 = CARTESIAN_POINT('',(144.651921,-121.269509,1.545)); +#200832 = VECTOR('',#200833,1.); +#200833 = DIRECTION('',(0.,1.,0.)); +#200834 = ORIENTED_EDGE('',*,*,#200835,.F.); +#200835 = EDGE_CURVE('',#200836,#200828,#200838,.T.); +#200836 = VERTEX_POINT('',#200837); +#200837 = CARTESIAN_POINT('',(144.651921,-120.230491,1.51)); +#200838 = LINE('',#200839,#200840); +#200839 = CARTESIAN_POINT('',(144.651921,-120.230491,1.51)); +#200840 = VECTOR('',#200841,1.); +#200841 = DIRECTION('',(0.,0.,1.)); +#200842 = ORIENTED_EDGE('',*,*,#200843,.F.); +#200843 = EDGE_CURVE('',#200804,#200836,#200844,.T.); +#200844 = LINE('',#200845,#200846); +#200845 = CARTESIAN_POINT('',(144.651921,-121.269509,1.51)); +#200846 = VECTOR('',#200847,1.); +#200847 = DIRECTION('',(0.,1.,0.)); +#200848 = PLANE('',#200849); +#200849 = AXIS2_PLACEMENT_3D('',#200850,#200851,#200852); +#200850 = CARTESIAN_POINT('',(144.651921,-121.269509,1.51)); +#200851 = DIRECTION('',(-1.,0.,0.)); +#200852 = DIRECTION('',(0.,1.,0.)); +#200853 = ADVANCED_FACE('',(#200854),#200879,.T.); +#200854 = FACE_BOUND('',#200855,.T.); +#200855 = EDGE_LOOP('',(#200856,#200857,#200865,#200873)); +#200856 = ORIENTED_EDGE('',*,*,#200835,.T.); +#200857 = ORIENTED_EDGE('',*,*,#200858,.T.); +#200858 = EDGE_CURVE('',#200828,#200859,#200861,.T.); +#200859 = VERTEX_POINT('',#200860); +#200860 = CARTESIAN_POINT('',(144.666853,-120.194443,1.545)); +#200861 = LINE('',#200862,#200863); +#200862 = CARTESIAN_POINT('',(144.651921,-120.230491,1.545)); +#200863 = VECTOR('',#200864,1.); +#200864 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200865 = ORIENTED_EDGE('',*,*,#200866,.F.); +#200866 = EDGE_CURVE('',#200867,#200859,#200869,.T.); +#200867 = VERTEX_POINT('',#200868); +#200868 = CARTESIAN_POINT('',(144.666853,-120.194443,1.51)); +#200869 = LINE('',#200870,#200871); +#200870 = CARTESIAN_POINT('',(144.666853,-120.194443,1.51)); +#200871 = VECTOR('',#200872,1.); +#200872 = DIRECTION('',(0.,0.,1.)); +#200873 = ORIENTED_EDGE('',*,*,#200874,.F.); +#200874 = EDGE_CURVE('',#200836,#200867,#200875,.T.); +#200875 = LINE('',#200876,#200877); +#200876 = CARTESIAN_POINT('',(144.651921,-120.230491,1.51)); +#200877 = VECTOR('',#200878,1.); +#200878 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200879 = PLANE('',#200880); +#200880 = AXIS2_PLACEMENT_3D('',#200881,#200882,#200883); +#200881 = CARTESIAN_POINT('',(144.651921,-120.230491,1.51)); +#200882 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#200883 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#200884 = ADVANCED_FACE('',(#200885),#200910,.T.); +#200885 = FACE_BOUND('',#200886,.T.); +#200886 = EDGE_LOOP('',(#200887,#200888,#200896,#200904)); +#200887 = ORIENTED_EDGE('',*,*,#200866,.T.); +#200888 = ORIENTED_EDGE('',*,*,#200889,.T.); +#200889 = EDGE_CURVE('',#200859,#200890,#200892,.T.); +#200890 = VERTEX_POINT('',#200891); +#200891 = CARTESIAN_POINT('',(146.544443,-118.316853,1.545)); +#200892 = LINE('',#200893,#200894); +#200893 = CARTESIAN_POINT('',(144.666853,-120.194443,1.545)); +#200894 = VECTOR('',#200895,1.); +#200895 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200896 = ORIENTED_EDGE('',*,*,#200897,.F.); +#200897 = EDGE_CURVE('',#200898,#200890,#200900,.T.); +#200898 = VERTEX_POINT('',#200899); +#200899 = CARTESIAN_POINT('',(146.544443,-118.316853,1.51)); +#200900 = LINE('',#200901,#200902); +#200901 = CARTESIAN_POINT('',(146.544443,-118.316853,1.51)); +#200902 = VECTOR('',#200903,1.); +#200903 = DIRECTION('',(0.,0.,1.)); +#200904 = ORIENTED_EDGE('',*,*,#200905,.F.); +#200905 = EDGE_CURVE('',#200867,#200898,#200906,.T.); +#200906 = LINE('',#200907,#200908); +#200907 = CARTESIAN_POINT('',(144.666853,-120.194443,1.51)); +#200908 = VECTOR('',#200909,1.); +#200909 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200910 = PLANE('',#200911); +#200911 = AXIS2_PLACEMENT_3D('',#200912,#200913,#200914); +#200912 = CARTESIAN_POINT('',(144.666853,-120.194443,1.51)); +#200913 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#200914 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200915 = ADVANCED_FACE('',(#200916),#200941,.T.); +#200916 = FACE_BOUND('',#200917,.T.); +#200917 = EDGE_LOOP('',(#200918,#200919,#200927,#200935)); +#200918 = ORIENTED_EDGE('',*,*,#200897,.T.); +#200919 = ORIENTED_EDGE('',*,*,#200920,.T.); +#200920 = EDGE_CURVE('',#200890,#200921,#200923,.T.); +#200921 = VERTEX_POINT('',#200922); +#200922 = CARTESIAN_POINT('',(146.580491,-118.301921,1.545)); +#200923 = LINE('',#200924,#200925); +#200924 = CARTESIAN_POINT('',(146.544443,-118.316853,1.545)); +#200925 = VECTOR('',#200926,1.); +#200926 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#200927 = ORIENTED_EDGE('',*,*,#200928,.F.); +#200928 = EDGE_CURVE('',#200929,#200921,#200931,.T.); +#200929 = VERTEX_POINT('',#200930); +#200930 = CARTESIAN_POINT('',(146.580491,-118.301921,1.51)); +#200931 = LINE('',#200932,#200933); +#200932 = CARTESIAN_POINT('',(146.580491,-118.301921,1.51)); +#200933 = VECTOR('',#200934,1.); +#200934 = DIRECTION('',(0.,0.,1.)); +#200935 = ORIENTED_EDGE('',*,*,#200936,.F.); +#200936 = EDGE_CURVE('',#200898,#200929,#200937,.T.); +#200937 = LINE('',#200938,#200939); +#200938 = CARTESIAN_POINT('',(146.544443,-118.316853,1.51)); +#200939 = VECTOR('',#200940,1.); +#200940 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#200941 = PLANE('',#200942); +#200942 = AXIS2_PLACEMENT_3D('',#200943,#200944,#200945); +#200943 = CARTESIAN_POINT('',(146.544443,-118.316853,1.51)); +#200944 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#200945 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#200946 = ADVANCED_FACE('',(#200947),#200972,.T.); +#200947 = FACE_BOUND('',#200948,.T.); +#200948 = EDGE_LOOP('',(#200949,#200950,#200958,#200966)); +#200949 = ORIENTED_EDGE('',*,*,#200928,.T.); +#200950 = ORIENTED_EDGE('',*,*,#200951,.T.); +#200951 = EDGE_CURVE('',#200921,#200952,#200954,.T.); +#200952 = VERTEX_POINT('',#200953); +#200953 = CARTESIAN_POINT('',(147.657107,-118.3,1.545)); +#200954 = LINE('',#200955,#200956); +#200955 = CARTESIAN_POINT('',(146.580491,-118.301921,1.545)); +#200956 = VECTOR('',#200957,1.); +#200957 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#200958 = ORIENTED_EDGE('',*,*,#200959,.F.); +#200959 = EDGE_CURVE('',#200960,#200952,#200962,.T.); +#200960 = VERTEX_POINT('',#200961); +#200961 = CARTESIAN_POINT('',(147.657107,-118.3,1.51)); +#200962 = LINE('',#200963,#200964); +#200963 = CARTESIAN_POINT('',(147.657107,-118.3,1.51)); +#200964 = VECTOR('',#200965,1.); +#200965 = DIRECTION('',(0.,0.,1.)); +#200966 = ORIENTED_EDGE('',*,*,#200967,.F.); +#200967 = EDGE_CURVE('',#200929,#200960,#200968,.T.); +#200968 = LINE('',#200969,#200970); +#200969 = CARTESIAN_POINT('',(146.580491,-118.301921,1.51)); +#200970 = VECTOR('',#200971,1.); +#200971 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#200972 = PLANE('',#200973); +#200973 = AXIS2_PLACEMENT_3D('',#200974,#200975,#200976); +#200974 = CARTESIAN_POINT('',(146.580491,-118.301921,1.51)); +#200975 = DIRECTION('',(-1.784291652783E-03,0.99999840815,0.)); +#200976 = DIRECTION('',(0.99999840815,1.784291652783E-03,0.)); +#200977 = ADVANCED_FACE('',(#200978),#201003,.T.); +#200978 = FACE_BOUND('',#200979,.T.); +#200979 = EDGE_LOOP('',(#200980,#200981,#200989,#200997)); +#200980 = ORIENTED_EDGE('',*,*,#200959,.T.); +#200981 = ORIENTED_EDGE('',*,*,#200982,.T.); +#200982 = EDGE_CURVE('',#200952,#200983,#200985,.T.); +#200983 = VERTEX_POINT('',#200984); +#200984 = CARTESIAN_POINT('',(153.25,-112.707107,1.545)); +#200985 = LINE('',#200986,#200987); +#200986 = CARTESIAN_POINT('',(147.657107,-118.3,1.545)); +#200987 = VECTOR('',#200988,1.); +#200988 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#200989 = ORIENTED_EDGE('',*,*,#200990,.F.); +#200990 = EDGE_CURVE('',#200991,#200983,#200993,.T.); +#200991 = VERTEX_POINT('',#200992); +#200992 = CARTESIAN_POINT('',(153.25,-112.707107,1.51)); +#200993 = LINE('',#200994,#200995); +#200994 = CARTESIAN_POINT('',(153.25,-112.707107,1.51)); +#200995 = VECTOR('',#200996,1.); +#200996 = DIRECTION('',(0.,0.,1.)); +#200997 = ORIENTED_EDGE('',*,*,#200998,.F.); +#200998 = EDGE_CURVE('',#200960,#200991,#200999,.T.); +#200999 = LINE('',#201000,#201001); +#201000 = CARTESIAN_POINT('',(147.657107,-118.3,1.51)); +#201001 = VECTOR('',#201002,1.); +#201002 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#201003 = PLANE('',#201004); +#201004 = AXIS2_PLACEMENT_3D('',#201005,#201006,#201007); +#201005 = CARTESIAN_POINT('',(147.657107,-118.3,1.51)); +#201006 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#201007 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#201008 = ADVANCED_FACE('',(#201009),#201034,.T.); +#201009 = FACE_BOUND('',#201010,.T.); +#201010 = EDGE_LOOP('',(#201011,#201012,#201020,#201028)); +#201011 = ORIENTED_EDGE('',*,*,#200990,.T.); +#201012 = ORIENTED_EDGE('',*,*,#201013,.T.); +#201013 = EDGE_CURVE('',#200983,#201014,#201016,.T.); +#201014 = VERTEX_POINT('',#201015); +#201015 = CARTESIAN_POINT('',(153.25,-112.292892,1.545)); +#201016 = LINE('',#201017,#201018); +#201017 = CARTESIAN_POINT('',(153.25,-112.707107,1.545)); +#201018 = VECTOR('',#201019,1.); +#201019 = DIRECTION('',(0.,1.,0.)); +#201020 = ORIENTED_EDGE('',*,*,#201021,.F.); +#201021 = EDGE_CURVE('',#201022,#201014,#201024,.T.); +#201022 = VERTEX_POINT('',#201023); +#201023 = CARTESIAN_POINT('',(153.25,-112.292892,1.51)); +#201024 = LINE('',#201025,#201026); +#201025 = CARTESIAN_POINT('',(153.25,-112.292892,1.51)); +#201026 = VECTOR('',#201027,1.); +#201027 = DIRECTION('',(0.,0.,1.)); +#201028 = ORIENTED_EDGE('',*,*,#201029,.F.); +#201029 = EDGE_CURVE('',#200991,#201022,#201030,.T.); +#201030 = LINE('',#201031,#201032); +#201031 = CARTESIAN_POINT('',(153.25,-112.707107,1.51)); +#201032 = VECTOR('',#201033,1.); +#201033 = DIRECTION('',(0.,1.,0.)); +#201034 = PLANE('',#201035); +#201035 = AXIS2_PLACEMENT_3D('',#201036,#201037,#201038); +#201036 = CARTESIAN_POINT('',(153.25,-112.707107,1.51)); +#201037 = DIRECTION('',(-1.,0.,0.)); +#201038 = DIRECTION('',(0.,1.,0.)); +#201039 = ADVANCED_FACE('',(#201040),#201065,.T.); +#201040 = FACE_BOUND('',#201041,.T.); +#201041 = EDGE_LOOP('',(#201042,#201043,#201051,#201059)); +#201042 = ORIENTED_EDGE('',*,*,#201021,.T.); +#201043 = ORIENTED_EDGE('',*,*,#201044,.T.); +#201044 = EDGE_CURVE('',#201014,#201045,#201047,.T.); +#201045 = VERTEX_POINT('',#201046); +#201046 = CARTESIAN_POINT('',(147.766853,-106.807028,1.545)); +#201047 = LINE('',#201048,#201049); +#201048 = CARTESIAN_POINT('',(153.25,-112.292892,1.545)); +#201049 = VECTOR('',#201050,1.); +#201050 = DIRECTION('',(-0.706931610699,0.70728190829,0.)); +#201051 = ORIENTED_EDGE('',*,*,#201052,.F.); +#201052 = EDGE_CURVE('',#201053,#201045,#201055,.T.); +#201053 = VERTEX_POINT('',#201054); +#201054 = CARTESIAN_POINT('',(147.766853,-106.807028,1.51)); +#201055 = LINE('',#201056,#201057); +#201056 = CARTESIAN_POINT('',(147.766853,-106.807028,1.51)); +#201057 = VECTOR('',#201058,1.); +#201058 = DIRECTION('',(0.,0.,1.)); +#201059 = ORIENTED_EDGE('',*,*,#201060,.F.); +#201060 = EDGE_CURVE('',#201022,#201053,#201061,.T.); +#201061 = LINE('',#201062,#201063); +#201062 = CARTESIAN_POINT('',(153.25,-112.292892,1.51)); +#201063 = VECTOR('',#201064,1.); +#201064 = DIRECTION('',(-0.706931610699,0.70728190829,0.)); +#201065 = PLANE('',#201066); +#201066 = AXIS2_PLACEMENT_3D('',#201067,#201068,#201069); +#201067 = CARTESIAN_POINT('',(153.25,-112.292892,1.51)); +#201068 = DIRECTION('',(-0.70728190829,-0.706931610699,0.)); +#201069 = DIRECTION('',(-0.706931610699,0.70728190829,0.)); +#201070 = ADVANCED_FACE('',(#201071),#201096,.T.); +#201071 = FACE_BOUND('',#201072,.T.); +#201072 = EDGE_LOOP('',(#201073,#201074,#201082,#201090)); +#201073 = ORIENTED_EDGE('',*,*,#201052,.T.); +#201074 = ORIENTED_EDGE('',*,*,#201075,.T.); +#201075 = EDGE_CURVE('',#201045,#201076,#201078,.T.); +#201076 = VERTEX_POINT('',#201077); +#201077 = CARTESIAN_POINT('',(147.751921,-106.77098,1.545)); +#201078 = LINE('',#201079,#201080); +#201079 = CARTESIAN_POINT('',(147.766853,-106.807028,1.545)); +#201080 = VECTOR('',#201081,1.); +#201081 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201082 = ORIENTED_EDGE('',*,*,#201083,.F.); +#201083 = EDGE_CURVE('',#201084,#201076,#201086,.T.); +#201084 = VERTEX_POINT('',#201085); +#201085 = CARTESIAN_POINT('',(147.751921,-106.77098,1.51)); +#201086 = LINE('',#201087,#201088); +#201087 = CARTESIAN_POINT('',(147.751921,-106.77098,1.51)); +#201088 = VECTOR('',#201089,1.); +#201089 = DIRECTION('',(0.,0.,1.)); +#201090 = ORIENTED_EDGE('',*,*,#201091,.F.); +#201091 = EDGE_CURVE('',#201053,#201084,#201092,.T.); +#201092 = LINE('',#201093,#201094); +#201093 = CARTESIAN_POINT('',(147.766853,-106.807028,1.51)); +#201094 = VECTOR('',#201095,1.); +#201095 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201096 = PLANE('',#201097); +#201097 = AXIS2_PLACEMENT_3D('',#201098,#201099,#201100); +#201098 = CARTESIAN_POINT('',(147.766853,-106.807028,1.51)); +#201099 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#201100 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201101 = ADVANCED_FACE('',(#201102),#201127,.T.); +#201102 = FACE_BOUND('',#201103,.T.); +#201103 = EDGE_LOOP('',(#201104,#201105,#201113,#201121)); +#201104 = ORIENTED_EDGE('',*,*,#201083,.T.); +#201105 = ORIENTED_EDGE('',*,*,#201106,.T.); +#201106 = EDGE_CURVE('',#201076,#201107,#201109,.T.); +#201107 = VERTEX_POINT('',#201108); +#201108 = CARTESIAN_POINT('',(147.751921,-100.064805,1.545)); +#201109 = LINE('',#201110,#201111); +#201110 = CARTESIAN_POINT('',(147.751921,-106.77098,1.545)); +#201111 = VECTOR('',#201112,1.); +#201112 = DIRECTION('',(0.,1.,0.)); +#201113 = ORIENTED_EDGE('',*,*,#201114,.F.); +#201114 = EDGE_CURVE('',#201115,#201107,#201117,.T.); +#201115 = VERTEX_POINT('',#201116); +#201116 = CARTESIAN_POINT('',(147.751921,-100.064805,1.51)); +#201117 = LINE('',#201118,#201119); +#201118 = CARTESIAN_POINT('',(147.751921,-100.064805,1.51)); +#201119 = VECTOR('',#201120,1.); +#201120 = DIRECTION('',(0.,0.,1.)); +#201121 = ORIENTED_EDGE('',*,*,#201122,.F.); +#201122 = EDGE_CURVE('',#201084,#201115,#201123,.T.); +#201123 = LINE('',#201124,#201125); +#201124 = CARTESIAN_POINT('',(147.751921,-106.77098,1.51)); +#201125 = VECTOR('',#201126,1.); +#201126 = DIRECTION('',(0.,1.,0.)); +#201127 = PLANE('',#201128); +#201128 = AXIS2_PLACEMENT_3D('',#201129,#201130,#201131); +#201129 = CARTESIAN_POINT('',(147.751921,-106.77098,1.51)); +#201130 = DIRECTION('',(-1.,0.,0.)); +#201131 = DIRECTION('',(0.,1.,0.)); +#201132 = ADVANCED_FACE('',(#201133),#201158,.T.); +#201133 = FACE_BOUND('',#201134,.T.); +#201134 = EDGE_LOOP('',(#201135,#201136,#201144,#201152)); +#201135 = ORIENTED_EDGE('',*,*,#201114,.T.); +#201136 = ORIENTED_EDGE('',*,*,#201137,.T.); +#201137 = EDGE_CURVE('',#201107,#201138,#201140,.T.); +#201138 = VERTEX_POINT('',#201139); +#201139 = CARTESIAN_POINT('',(147.766853,-100.028757,1.545)); +#201140 = LINE('',#201141,#201142); +#201141 = CARTESIAN_POINT('',(147.751921,-100.064805,1.545)); +#201142 = VECTOR('',#201143,1.); +#201143 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#201144 = ORIENTED_EDGE('',*,*,#201145,.F.); +#201145 = EDGE_CURVE('',#201146,#201138,#201148,.T.); +#201146 = VERTEX_POINT('',#201147); +#201147 = CARTESIAN_POINT('',(147.766853,-100.028757,1.51)); +#201148 = LINE('',#201149,#201150); +#201149 = CARTESIAN_POINT('',(147.766853,-100.028757,1.51)); +#201150 = VECTOR('',#201151,1.); +#201151 = DIRECTION('',(0.,0.,1.)); +#201152 = ORIENTED_EDGE('',*,*,#201153,.F.); +#201153 = EDGE_CURVE('',#201115,#201146,#201154,.T.); +#201154 = LINE('',#201155,#201156); +#201155 = CARTESIAN_POINT('',(147.751921,-100.064805,1.51)); +#201156 = VECTOR('',#201157,1.); +#201157 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#201158 = PLANE('',#201159); +#201159 = AXIS2_PLACEMENT_3D('',#201160,#201161,#201162); +#201160 = CARTESIAN_POINT('',(147.751921,-100.064805,1.51)); +#201161 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#201162 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#201163 = ADVANCED_FACE('',(#201164),#201189,.T.); +#201164 = FACE_BOUND('',#201165,.T.); +#201165 = EDGE_LOOP('',(#201166,#201167,#201175,#201183)); +#201166 = ORIENTED_EDGE('',*,*,#201145,.T.); +#201167 = ORIENTED_EDGE('',*,*,#201168,.T.); +#201168 = EDGE_CURVE('',#201138,#201169,#201171,.T.); +#201169 = VERTEX_POINT('',#201170); +#201170 = CARTESIAN_POINT('',(149.01,-98.782892,1.545)); +#201171 = LINE('',#201172,#201173); +#201172 = CARTESIAN_POINT('',(147.766853,-100.028757,1.545)); +#201173 = VECTOR('',#201174,1.); +#201174 = DIRECTION('',(0.706334199757,0.707878519419,0.)); +#201175 = ORIENTED_EDGE('',*,*,#201176,.F.); +#201176 = EDGE_CURVE('',#201177,#201169,#201179,.T.); +#201177 = VERTEX_POINT('',#201178); +#201178 = CARTESIAN_POINT('',(149.01,-98.782892,1.51)); +#201179 = LINE('',#201180,#201181); +#201180 = CARTESIAN_POINT('',(149.01,-98.782892,1.51)); +#201181 = VECTOR('',#201182,1.); +#201182 = DIRECTION('',(0.,0.,1.)); +#201183 = ORIENTED_EDGE('',*,*,#201184,.F.); +#201184 = EDGE_CURVE('',#201146,#201177,#201185,.T.); +#201185 = LINE('',#201186,#201187); +#201186 = CARTESIAN_POINT('',(147.766853,-100.028757,1.51)); +#201187 = VECTOR('',#201188,1.); +#201188 = DIRECTION('',(0.706334199757,0.707878519419,0.)); +#201189 = PLANE('',#201190); +#201190 = AXIS2_PLACEMENT_3D('',#201191,#201192,#201193); +#201191 = CARTESIAN_POINT('',(147.766853,-100.028757,1.51)); +#201192 = DIRECTION('',(-0.707878519419,0.706334199757,0.)); +#201193 = DIRECTION('',(0.706334199757,0.707878519419,0.)); +#201194 = ADVANCED_FACE('',(#201195),#201220,.T.); +#201195 = FACE_BOUND('',#201196,.T.); +#201196 = EDGE_LOOP('',(#201197,#201198,#201206,#201214)); +#201197 = ORIENTED_EDGE('',*,*,#201176,.T.); +#201198 = ORIENTED_EDGE('',*,*,#201199,.T.); +#201199 = EDGE_CURVE('',#201169,#201200,#201202,.T.); +#201200 = VERTEX_POINT('',#201201); +#201201 = CARTESIAN_POINT('',(149.01,-91.802892,1.545)); +#201202 = LINE('',#201203,#201204); +#201203 = CARTESIAN_POINT('',(149.01,-98.782892,1.545)); +#201204 = VECTOR('',#201205,1.); +#201205 = DIRECTION('',(0.,1.,0.)); +#201206 = ORIENTED_EDGE('',*,*,#201207,.F.); +#201207 = EDGE_CURVE('',#201208,#201200,#201210,.T.); +#201208 = VERTEX_POINT('',#201209); +#201209 = CARTESIAN_POINT('',(149.01,-91.802892,1.51)); +#201210 = LINE('',#201211,#201212); +#201211 = CARTESIAN_POINT('',(149.01,-91.802892,1.51)); +#201212 = VECTOR('',#201213,1.); +#201213 = DIRECTION('',(0.,0.,1.)); +#201214 = ORIENTED_EDGE('',*,*,#201215,.F.); +#201215 = EDGE_CURVE('',#201177,#201208,#201216,.T.); +#201216 = LINE('',#201217,#201218); +#201217 = CARTESIAN_POINT('',(149.01,-98.782892,1.51)); +#201218 = VECTOR('',#201219,1.); +#201219 = DIRECTION('',(0.,1.,0.)); +#201220 = PLANE('',#201221); +#201221 = AXIS2_PLACEMENT_3D('',#201222,#201223,#201224); +#201222 = CARTESIAN_POINT('',(149.01,-98.782892,1.51)); +#201223 = DIRECTION('',(-1.,0.,0.)); +#201224 = DIRECTION('',(0.,1.,0.)); +#201225 = ADVANCED_FACE('',(#201226),#201251,.T.); +#201226 = FACE_BOUND('',#201227,.T.); +#201227 = EDGE_LOOP('',(#201228,#201229,#201237,#201245)); +#201228 = ORIENTED_EDGE('',*,*,#201207,.T.); +#201229 = ORIENTED_EDGE('',*,*,#201230,.T.); +#201230 = EDGE_CURVE('',#201200,#201231,#201233,.T.); +#201231 = VERTEX_POINT('',#201232); +#201232 = CARTESIAN_POINT('',(148.416853,-91.207028,1.545)); +#201233 = LINE('',#201234,#201235); +#201234 = CARTESIAN_POINT('',(149.01,-91.802892,1.545)); +#201235 = VECTOR('',#201236,1.); +#201236 = DIRECTION('',(-0.705489134949,0.708720735176,0.)); +#201237 = ORIENTED_EDGE('',*,*,#201238,.F.); +#201238 = EDGE_CURVE('',#201239,#201231,#201241,.T.); +#201239 = VERTEX_POINT('',#201240); +#201240 = CARTESIAN_POINT('',(148.416853,-91.207028,1.51)); +#201241 = LINE('',#201242,#201243); +#201242 = CARTESIAN_POINT('',(148.416853,-91.207028,1.51)); +#201243 = VECTOR('',#201244,1.); +#201244 = DIRECTION('',(0.,0.,1.)); +#201245 = ORIENTED_EDGE('',*,*,#201246,.F.); +#201246 = EDGE_CURVE('',#201208,#201239,#201247,.T.); +#201247 = LINE('',#201248,#201249); +#201248 = CARTESIAN_POINT('',(149.01,-91.802892,1.51)); +#201249 = VECTOR('',#201250,1.); +#201250 = DIRECTION('',(-0.705489134949,0.708720735176,0.)); +#201251 = PLANE('',#201252); +#201252 = AXIS2_PLACEMENT_3D('',#201253,#201254,#201255); +#201253 = CARTESIAN_POINT('',(149.01,-91.802892,1.51)); +#201254 = DIRECTION('',(-0.708720735176,-0.705489134949,0.)); +#201255 = DIRECTION('',(-0.705489134949,0.708720735176,0.)); +#201256 = ADVANCED_FACE('',(#201257),#201282,.T.); +#201257 = FACE_BOUND('',#201258,.T.); +#201258 = EDGE_LOOP('',(#201259,#201260,#201268,#201276)); +#201259 = ORIENTED_EDGE('',*,*,#201238,.T.); +#201260 = ORIENTED_EDGE('',*,*,#201261,.T.); +#201261 = EDGE_CURVE('',#201231,#201262,#201264,.T.); +#201262 = VERTEX_POINT('',#201263); +#201263 = CARTESIAN_POINT('',(148.401921,-91.17098,1.545)); +#201264 = LINE('',#201265,#201266); +#201265 = CARTESIAN_POINT('',(148.416853,-91.207028,1.545)); +#201266 = VECTOR('',#201267,1.); +#201267 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201268 = ORIENTED_EDGE('',*,*,#201269,.F.); +#201269 = EDGE_CURVE('',#201270,#201262,#201272,.T.); +#201270 = VERTEX_POINT('',#201271); +#201271 = CARTESIAN_POINT('',(148.401921,-91.17098,1.51)); +#201272 = LINE('',#201273,#201274); +#201273 = CARTESIAN_POINT('',(148.401921,-91.17098,1.51)); +#201274 = VECTOR('',#201275,1.); +#201275 = DIRECTION('',(0.,0.,1.)); +#201276 = ORIENTED_EDGE('',*,*,#201277,.F.); +#201277 = EDGE_CURVE('',#201239,#201270,#201278,.T.); +#201278 = LINE('',#201279,#201280); +#201279 = CARTESIAN_POINT('',(148.416853,-91.207028,1.51)); +#201280 = VECTOR('',#201281,1.); +#201281 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201282 = PLANE('',#201283); +#201283 = AXIS2_PLACEMENT_3D('',#201284,#201285,#201286); +#201284 = CARTESIAN_POINT('',(148.416853,-91.207028,1.51)); +#201285 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#201286 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201287 = ADVANCED_FACE('',(#201288),#201313,.T.); +#201288 = FACE_BOUND('',#201289,.T.); +#201289 = EDGE_LOOP('',(#201290,#201291,#201299,#201307)); +#201290 = ORIENTED_EDGE('',*,*,#201269,.T.); +#201291 = ORIENTED_EDGE('',*,*,#201292,.T.); +#201292 = EDGE_CURVE('',#201262,#201293,#201295,.T.); +#201293 = VERTEX_POINT('',#201294); +#201294 = CARTESIAN_POINT('',(148.4,-90.584073,1.545)); +#201295 = LINE('',#201296,#201297); +#201296 = CARTESIAN_POINT('',(148.401921,-91.17098,1.545)); +#201297 = VECTOR('',#201298,1.); +#201298 = DIRECTION('',(-3.273073434306E-03,0.999994643481,0.)); +#201299 = ORIENTED_EDGE('',*,*,#201300,.F.); +#201300 = EDGE_CURVE('',#201301,#201293,#201303,.T.); +#201301 = VERTEX_POINT('',#201302); +#201302 = CARTESIAN_POINT('',(148.4,-90.584073,1.51)); +#201303 = LINE('',#201304,#201305); +#201304 = CARTESIAN_POINT('',(148.4,-90.584073,1.51)); +#201305 = VECTOR('',#201306,1.); +#201306 = DIRECTION('',(0.,0.,1.)); +#201307 = ORIENTED_EDGE('',*,*,#201308,.F.); +#201308 = EDGE_CURVE('',#201270,#201301,#201309,.T.); +#201309 = LINE('',#201310,#201311); +#201310 = CARTESIAN_POINT('',(148.401921,-91.17098,1.51)); +#201311 = VECTOR('',#201312,1.); +#201312 = DIRECTION('',(-3.273073434306E-03,0.999994643481,0.)); +#201313 = PLANE('',#201314); +#201314 = AXIS2_PLACEMENT_3D('',#201315,#201316,#201317); +#201315 = CARTESIAN_POINT('',(148.401921,-91.17098,1.51)); +#201316 = DIRECTION('',(-0.999994643481,-3.273073434306E-03,0.)); +#201317 = DIRECTION('',(-3.273073434306E-03,0.999994643481,0.)); +#201318 = ADVANCED_FACE('',(#201319),#201344,.T.); +#201319 = FACE_BOUND('',#201320,.T.); +#201320 = EDGE_LOOP('',(#201321,#201322,#201330,#201338)); +#201321 = ORIENTED_EDGE('',*,*,#201300,.T.); +#201322 = ORIENTED_EDGE('',*,*,#201323,.T.); +#201323 = EDGE_CURVE('',#201293,#201324,#201326,.T.); +#201324 = VERTEX_POINT('',#201325); +#201325 = CARTESIAN_POINT('',(148.385195,-90.580107,1.545)); +#201326 = LINE('',#201327,#201328); +#201327 = CARTESIAN_POINT('',(148.4,-90.584073,1.545)); +#201328 = VECTOR('',#201329,1.); +#201329 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#201330 = ORIENTED_EDGE('',*,*,#201331,.F.); +#201331 = EDGE_CURVE('',#201332,#201324,#201334,.T.); +#201332 = VERTEX_POINT('',#201333); +#201333 = CARTESIAN_POINT('',(148.385195,-90.580107,1.51)); +#201334 = LINE('',#201335,#201336); +#201335 = CARTESIAN_POINT('',(148.385195,-90.580107,1.51)); +#201336 = VECTOR('',#201337,1.); +#201337 = DIRECTION('',(0.,0.,1.)); +#201338 = ORIENTED_EDGE('',*,*,#201339,.F.); +#201339 = EDGE_CURVE('',#201301,#201332,#201340,.T.); +#201340 = LINE('',#201341,#201342); +#201341 = CARTESIAN_POINT('',(148.4,-90.584073,1.51)); +#201342 = VECTOR('',#201343,1.); +#201343 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#201344 = PLANE('',#201345); +#201345 = AXIS2_PLACEMENT_3D('',#201346,#201347,#201348); +#201346 = CARTESIAN_POINT('',(148.4,-90.584073,1.51)); +#201347 = DIRECTION('',(-0.258758913865,-0.9659419364,0.)); +#201348 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#201349 = ADVANCED_FACE('',(#201350),#201377,.T.); +#201350 = FACE_BOUND('',#201351,.T.); +#201351 = EDGE_LOOP('',(#201352,#201353,#201362,#201370)); +#201352 = ORIENTED_EDGE('',*,*,#201331,.T.); +#201353 = ORIENTED_EDGE('',*,*,#201354,.T.); +#201354 = EDGE_CURVE('',#201324,#201355,#201357,.T.); +#201355 = VERTEX_POINT('',#201356); +#201356 = CARTESIAN_POINT('',(148.614805,-90.580107,1.545)); +#201357 = CIRCLE('',#201358,0.299999472923); +#201358 = AXIS2_PLACEMENT_3D('',#201359,#201360,#201361); +#201359 = CARTESIAN_POINT('',(148.5,-90.30294369844,1.545)); +#201360 = DIRECTION('',(0.,0.,-1.)); +#201361 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#201362 = ORIENTED_EDGE('',*,*,#201363,.F.); +#201363 = EDGE_CURVE('',#201364,#201355,#201366,.T.); +#201364 = VERTEX_POINT('',#201365); +#201365 = CARTESIAN_POINT('',(148.614805,-90.580107,1.51)); +#201366 = LINE('',#201367,#201368); +#201367 = CARTESIAN_POINT('',(148.614805,-90.580107,1.51)); +#201368 = VECTOR('',#201369,1.); +#201369 = DIRECTION('',(0.,0.,1.)); +#201370 = ORIENTED_EDGE('',*,*,#201371,.F.); +#201371 = EDGE_CURVE('',#201332,#201364,#201372,.T.); +#201372 = CIRCLE('',#201373,0.299999472923); +#201373 = AXIS2_PLACEMENT_3D('',#201374,#201375,#201376); +#201374 = CARTESIAN_POINT('',(148.5,-90.30294369844,1.51)); +#201375 = DIRECTION('',(0.,0.,-1.)); +#201376 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#201377 = CYLINDRICAL_SURFACE('',#201378,0.299999472923); +#201378 = AXIS2_PLACEMENT_3D('',#201379,#201380,#201381); +#201379 = CARTESIAN_POINT('',(148.5,-90.30294369844,1.51)); +#201380 = DIRECTION('',(0.,0.,-1.)); +#201381 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#201382 = ADVANCED_FACE('',(#201383),#201399,.T.); +#201383 = FACE_BOUND('',#201384,.T.); +#201384 = EDGE_LOOP('',(#201385,#201386,#201392,#201393)); +#201385 = ORIENTED_EDGE('',*,*,#201363,.T.); +#201386 = ORIENTED_EDGE('',*,*,#201387,.T.); +#201387 = EDGE_CURVE('',#201355,#200291,#201388,.T.); +#201388 = LINE('',#201389,#201390); +#201389 = CARTESIAN_POINT('',(148.614805,-90.580107,1.545)); +#201390 = VECTOR('',#201391,1.); +#201391 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#201392 = ORIENTED_EDGE('',*,*,#200288,.F.); +#201393 = ORIENTED_EDGE('',*,*,#201394,.F.); +#201394 = EDGE_CURVE('',#201364,#200289,#201395,.T.); +#201395 = LINE('',#201396,#201397); +#201396 = CARTESIAN_POINT('',(148.614805,-90.580107,1.51)); +#201397 = VECTOR('',#201398,1.); +#201398 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#201399 = PLANE('',#201400); +#201400 = AXIS2_PLACEMENT_3D('',#201401,#201402,#201403); +#201401 = CARTESIAN_POINT('',(148.614805,-90.580107,1.51)); +#201402 = DIRECTION('',(0.258758913865,-0.9659419364,0.)); +#201403 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#201404 = ADVANCED_FACE('',(#201405),#201432,.F.); +#201405 = FACE_BOUND('',#201406,.T.); +#201406 = EDGE_LOOP('',(#201407,#201417,#201424,#201425)); +#201407 = ORIENTED_EDGE('',*,*,#201408,.T.); +#201408 = EDGE_CURVE('',#201409,#201411,#201413,.T.); +#201409 = VERTEX_POINT('',#201410); +#201410 = CARTESIAN_POINT('',(148.637255,-90.302943,1.51)); +#201411 = VERTEX_POINT('',#201412); +#201412 = CARTESIAN_POINT('',(148.637255,-90.302943,1.545)); +#201413 = LINE('',#201414,#201415); +#201414 = CARTESIAN_POINT('',(148.637255,-90.302943,1.51)); +#201415 = VECTOR('',#201416,1.); +#201416 = DIRECTION('',(0.,0.,1.)); +#201417 = ORIENTED_EDGE('',*,*,#201418,.T.); +#201418 = EDGE_CURVE('',#201411,#201411,#201419,.T.); +#201419 = CIRCLE('',#201420,0.137255); +#201420 = AXIS2_PLACEMENT_3D('',#201421,#201422,#201423); +#201421 = CARTESIAN_POINT('',(148.5,-90.302943,1.545)); +#201422 = DIRECTION('',(0.,0.,1.)); +#201423 = DIRECTION('',(1.,0.,-0.)); +#201424 = ORIENTED_EDGE('',*,*,#201408,.F.); +#201425 = ORIENTED_EDGE('',*,*,#201426,.F.); +#201426 = EDGE_CURVE('',#201409,#201409,#201427,.T.); +#201427 = CIRCLE('',#201428,0.137255); +#201428 = AXIS2_PLACEMENT_3D('',#201429,#201430,#201431); +#201429 = CARTESIAN_POINT('',(148.5,-90.302943,1.51)); +#201430 = DIRECTION('',(0.,0.,1.)); +#201431 = DIRECTION('',(1.,0.,-0.)); +#201432 = CYLINDRICAL_SURFACE('',#201433,0.137255); +#201433 = AXIS2_PLACEMENT_3D('',#201434,#201435,#201436); +#201434 = CARTESIAN_POINT('',(148.5,-90.302943,1.51)); +#201435 = DIRECTION('',(-0.,-0.,-1.)); +#201436 = DIRECTION('',(1.,0.,-0.)); +#201437 = ADVANCED_FACE('',(#201438,#201476),#201479,.F.); +#201438 = FACE_BOUND('',#201439,.T.); +#201439 = EDGE_LOOP('',(#201440,#201441,#201442,#201443,#201444,#201445, + #201446,#201447,#201448,#201449,#201450,#201451,#201452,#201453, + #201454,#201455,#201456,#201457,#201458,#201459,#201460,#201461, + #201462,#201463,#201464,#201465,#201466,#201467,#201468,#201469, + #201470,#201471,#201472,#201473,#201474,#201475)); +#201440 = ORIENTED_EDGE('',*,*,#200314,.T.); +#201441 = ORIENTED_EDGE('',*,*,#200345,.T.); +#201442 = ORIENTED_EDGE('',*,*,#200376,.T.); +#201443 = ORIENTED_EDGE('',*,*,#200407,.T.); +#201444 = ORIENTED_EDGE('',*,*,#200438,.T.); +#201445 = ORIENTED_EDGE('',*,*,#200469,.T.); +#201446 = ORIENTED_EDGE('',*,*,#200500,.T.); +#201447 = ORIENTED_EDGE('',*,*,#200531,.T.); +#201448 = ORIENTED_EDGE('',*,*,#200562,.T.); +#201449 = ORIENTED_EDGE('',*,*,#200593,.T.); +#201450 = ORIENTED_EDGE('',*,*,#200624,.T.); +#201451 = ORIENTED_EDGE('',*,*,#200655,.T.); +#201452 = ORIENTED_EDGE('',*,*,#200686,.T.); +#201453 = ORIENTED_EDGE('',*,*,#200717,.T.); +#201454 = ORIENTED_EDGE('',*,*,#200748,.T.); +#201455 = ORIENTED_EDGE('',*,*,#200779,.T.); +#201456 = ORIENTED_EDGE('',*,*,#200811,.T.); +#201457 = ORIENTED_EDGE('',*,*,#200843,.T.); +#201458 = ORIENTED_EDGE('',*,*,#200874,.T.); +#201459 = ORIENTED_EDGE('',*,*,#200905,.T.); +#201460 = ORIENTED_EDGE('',*,*,#200936,.T.); +#201461 = ORIENTED_EDGE('',*,*,#200967,.T.); +#201462 = ORIENTED_EDGE('',*,*,#200998,.T.); +#201463 = ORIENTED_EDGE('',*,*,#201029,.T.); +#201464 = ORIENTED_EDGE('',*,*,#201060,.T.); +#201465 = ORIENTED_EDGE('',*,*,#201091,.T.); +#201466 = ORIENTED_EDGE('',*,*,#201122,.T.); +#201467 = ORIENTED_EDGE('',*,*,#201153,.T.); +#201468 = ORIENTED_EDGE('',*,*,#201184,.T.); +#201469 = ORIENTED_EDGE('',*,*,#201215,.T.); +#201470 = ORIENTED_EDGE('',*,*,#201246,.T.); +#201471 = ORIENTED_EDGE('',*,*,#201277,.T.); +#201472 = ORIENTED_EDGE('',*,*,#201308,.T.); +#201473 = ORIENTED_EDGE('',*,*,#201339,.T.); +#201474 = ORIENTED_EDGE('',*,*,#201371,.T.); +#201475 = ORIENTED_EDGE('',*,*,#201394,.T.); +#201476 = FACE_BOUND('',#201477,.T.); +#201477 = EDGE_LOOP('',(#201478)); +#201478 = ORIENTED_EDGE('',*,*,#201426,.T.); +#201479 = PLANE('',#201480); +#201480 = AXIS2_PLACEMENT_3D('',#201481,#201482,#201483); +#201481 = CARTESIAN_POINT('',(0.,0.,1.51)); +#201482 = DIRECTION('',(0.,0.,1.)); +#201483 = DIRECTION('',(1.,0.,-0.)); +#201484 = ADVANCED_FACE('',(#201485,#201523),#201526,.T.); +#201485 = FACE_BOUND('',#201486,.F.); +#201486 = EDGE_LOOP('',(#201487,#201488,#201489,#201490,#201491,#201492, + #201493,#201494,#201495,#201496,#201497,#201498,#201499,#201500, + #201501,#201502,#201503,#201504,#201505,#201506,#201507,#201508, + #201509,#201510,#201511,#201512,#201513,#201514,#201515,#201516, + #201517,#201518,#201519,#201520,#201521,#201522)); +#201487 = ORIENTED_EDGE('',*,*,#200298,.T.); +#201488 = ORIENTED_EDGE('',*,*,#200329,.T.); +#201489 = ORIENTED_EDGE('',*,*,#200360,.T.); +#201490 = ORIENTED_EDGE('',*,*,#200391,.T.); +#201491 = ORIENTED_EDGE('',*,*,#200422,.T.); +#201492 = ORIENTED_EDGE('',*,*,#200453,.T.); +#201493 = ORIENTED_EDGE('',*,*,#200484,.T.); +#201494 = ORIENTED_EDGE('',*,*,#200515,.T.); +#201495 = ORIENTED_EDGE('',*,*,#200546,.T.); +#201496 = ORIENTED_EDGE('',*,*,#200577,.T.); +#201497 = ORIENTED_EDGE('',*,*,#200608,.T.); +#201498 = ORIENTED_EDGE('',*,*,#200639,.T.); +#201499 = ORIENTED_EDGE('',*,*,#200670,.T.); +#201500 = ORIENTED_EDGE('',*,*,#200701,.T.); +#201501 = ORIENTED_EDGE('',*,*,#200732,.T.); +#201502 = ORIENTED_EDGE('',*,*,#200763,.T.); +#201503 = ORIENTED_EDGE('',*,*,#200794,.T.); +#201504 = ORIENTED_EDGE('',*,*,#200827,.T.); +#201505 = ORIENTED_EDGE('',*,*,#200858,.T.); +#201506 = ORIENTED_EDGE('',*,*,#200889,.T.); +#201507 = ORIENTED_EDGE('',*,*,#200920,.T.); +#201508 = ORIENTED_EDGE('',*,*,#200951,.T.); +#201509 = ORIENTED_EDGE('',*,*,#200982,.T.); +#201510 = ORIENTED_EDGE('',*,*,#201013,.T.); +#201511 = ORIENTED_EDGE('',*,*,#201044,.T.); +#201512 = ORIENTED_EDGE('',*,*,#201075,.T.); +#201513 = ORIENTED_EDGE('',*,*,#201106,.T.); +#201514 = ORIENTED_EDGE('',*,*,#201137,.T.); +#201515 = ORIENTED_EDGE('',*,*,#201168,.T.); +#201516 = ORIENTED_EDGE('',*,*,#201199,.T.); +#201517 = ORIENTED_EDGE('',*,*,#201230,.T.); +#201518 = ORIENTED_EDGE('',*,*,#201261,.T.); +#201519 = ORIENTED_EDGE('',*,*,#201292,.T.); +#201520 = ORIENTED_EDGE('',*,*,#201323,.T.); +#201521 = ORIENTED_EDGE('',*,*,#201354,.T.); +#201522 = ORIENTED_EDGE('',*,*,#201387,.T.); +#201523 = FACE_BOUND('',#201524,.F.); +#201524 = EDGE_LOOP('',(#201525)); +#201525 = ORIENTED_EDGE('',*,*,#201418,.T.); +#201526 = PLANE('',#201527); +#201527 = AXIS2_PLACEMENT_3D('',#201528,#201529,#201530); +#201528 = CARTESIAN_POINT('',(0.,0.,1.545)); +#201529 = DIRECTION('',(0.,0.,1.)); +#201530 = DIRECTION('',(1.,0.,-0.)); +#201531 = MANIFOLD_SOLID_BREP('',#201532); +#201532 = CLOSED_SHELL('',(#201533,#201573,#201604,#201637,#201668, + #201699,#201730,#201763,#201785,#201818,#201837)); +#201533 = ADVANCED_FACE('',(#201534),#201568,.T.); +#201534 = FACE_BOUND('',#201535,.T.); +#201535 = EDGE_LOOP('',(#201536,#201546,#201554,#201562)); +#201536 = ORIENTED_EDGE('',*,*,#201537,.T.); +#201537 = EDGE_CURVE('',#201538,#201540,#201542,.T.); +#201538 = VERTEX_POINT('',#201539); +#201539 = CARTESIAN_POINT('',(145.744443,-75.996853,1.51)); +#201540 = VERTEX_POINT('',#201541); +#201541 = CARTESIAN_POINT('',(145.744443,-75.996853,1.545)); +#201542 = LINE('',#201543,#201544); +#201543 = CARTESIAN_POINT('',(145.744443,-75.996853,1.51)); +#201544 = VECTOR('',#201545,1.); +#201545 = DIRECTION('',(0.,0.,1.)); +#201546 = ORIENTED_EDGE('',*,*,#201547,.T.); +#201547 = EDGE_CURVE('',#201540,#201548,#201550,.T.); +#201548 = VERTEX_POINT('',#201549); +#201549 = CARTESIAN_POINT('',(145.780491,-75.981921,1.545)); +#201550 = LINE('',#201551,#201552); +#201551 = CARTESIAN_POINT('',(145.744443,-75.996853,1.545)); +#201552 = VECTOR('',#201553,1.); +#201553 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#201554 = ORIENTED_EDGE('',*,*,#201555,.F.); +#201555 = EDGE_CURVE('',#201556,#201548,#201558,.T.); +#201556 = VERTEX_POINT('',#201557); +#201557 = CARTESIAN_POINT('',(145.780491,-75.981921,1.51)); +#201558 = LINE('',#201559,#201560); +#201559 = CARTESIAN_POINT('',(145.780491,-75.981921,1.51)); +#201560 = VECTOR('',#201561,1.); +#201561 = DIRECTION('',(0.,0.,1.)); +#201562 = ORIENTED_EDGE('',*,*,#201563,.F.); +#201563 = EDGE_CURVE('',#201538,#201556,#201564,.T.); +#201564 = LINE('',#201565,#201566); +#201565 = CARTESIAN_POINT('',(145.744443,-75.996853,1.51)); +#201566 = VECTOR('',#201567,1.); +#201567 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#201568 = PLANE('',#201569); +#201569 = AXIS2_PLACEMENT_3D('',#201570,#201571,#201572); +#201570 = CARTESIAN_POINT('',(145.744443,-75.996853,1.51)); +#201571 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#201572 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#201573 = ADVANCED_FACE('',(#201574),#201599,.T.); +#201574 = FACE_BOUND('',#201575,.T.); +#201575 = EDGE_LOOP('',(#201576,#201577,#201585,#201593)); +#201576 = ORIENTED_EDGE('',*,*,#201555,.T.); +#201577 = ORIENTED_EDGE('',*,*,#201578,.T.); +#201578 = EDGE_CURVE('',#201548,#201579,#201581,.T.); +#201579 = VERTEX_POINT('',#201580); +#201580 = CARTESIAN_POINT('',(146.769509,-75.981921,1.545)); +#201581 = LINE('',#201582,#201583); +#201582 = CARTESIAN_POINT('',(145.780491,-75.981921,1.545)); +#201583 = VECTOR('',#201584,1.); +#201584 = DIRECTION('',(1.,0.,0.)); +#201585 = ORIENTED_EDGE('',*,*,#201586,.F.); +#201586 = EDGE_CURVE('',#201587,#201579,#201589,.T.); +#201587 = VERTEX_POINT('',#201588); +#201588 = CARTESIAN_POINT('',(146.769509,-75.981921,1.51)); +#201589 = LINE('',#201590,#201591); +#201590 = CARTESIAN_POINT('',(146.769509,-75.981921,1.51)); +#201591 = VECTOR('',#201592,1.); +#201592 = DIRECTION('',(0.,0.,1.)); +#201593 = ORIENTED_EDGE('',*,*,#201594,.F.); +#201594 = EDGE_CURVE('',#201556,#201587,#201595,.T.); +#201595 = LINE('',#201596,#201597); +#201596 = CARTESIAN_POINT('',(145.780491,-75.981921,1.51)); +#201597 = VECTOR('',#201598,1.); +#201598 = DIRECTION('',(1.,0.,0.)); +#201599 = PLANE('',#201600); +#201600 = AXIS2_PLACEMENT_3D('',#201601,#201602,#201603); +#201601 = CARTESIAN_POINT('',(145.780491,-75.981921,1.51)); +#201602 = DIRECTION('',(0.,1.,0.)); +#201603 = DIRECTION('',(1.,0.,0.)); +#201604 = ADVANCED_FACE('',(#201605),#201632,.T.); +#201605 = FACE_BOUND('',#201606,.T.); +#201606 = EDGE_LOOP('',(#201607,#201608,#201617,#201625)); +#201607 = ORIENTED_EDGE('',*,*,#201586,.T.); +#201608 = ORIENTED_EDGE('',*,*,#201609,.T.); +#201609 = EDGE_CURVE('',#201579,#201610,#201612,.T.); +#201610 = VERTEX_POINT('',#201611); +#201611 = CARTESIAN_POINT('',(146.769509,-76.178079,1.545)); +#201612 = CIRCLE('',#201613,0.100000456609); +#201613 = AXIS2_PLACEMENT_3D('',#201614,#201615,#201616); +#201614 = CARTESIAN_POINT('',(146.75,-76.08,1.545)); +#201615 = DIRECTION('',(0.,0.,-1.)); +#201616 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#201617 = ORIENTED_EDGE('',*,*,#201618,.F.); +#201618 = EDGE_CURVE('',#201619,#201610,#201621,.T.); +#201619 = VERTEX_POINT('',#201620); +#201620 = CARTESIAN_POINT('',(146.769509,-76.178079,1.51)); +#201621 = LINE('',#201622,#201623); +#201622 = CARTESIAN_POINT('',(146.769509,-76.178079,1.51)); +#201623 = VECTOR('',#201624,1.); +#201624 = DIRECTION('',(0.,0.,1.)); +#201625 = ORIENTED_EDGE('',*,*,#201626,.F.); +#201626 = EDGE_CURVE('',#201587,#201619,#201627,.T.); +#201627 = CIRCLE('',#201628,0.100000456609); +#201628 = AXIS2_PLACEMENT_3D('',#201629,#201630,#201631); +#201629 = CARTESIAN_POINT('',(146.75,-76.08,1.51)); +#201630 = DIRECTION('',(0.,0.,-1.)); +#201631 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#201632 = CYLINDRICAL_SURFACE('',#201633,0.100000456609); +#201633 = AXIS2_PLACEMENT_3D('',#201634,#201635,#201636); +#201634 = CARTESIAN_POINT('',(146.75,-76.08,1.51)); +#201635 = DIRECTION('',(0.,0.,-1.)); +#201636 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#201637 = ADVANCED_FACE('',(#201638),#201663,.T.); +#201638 = FACE_BOUND('',#201639,.T.); +#201639 = EDGE_LOOP('',(#201640,#201641,#201649,#201657)); +#201640 = ORIENTED_EDGE('',*,*,#201618,.T.); +#201641 = ORIENTED_EDGE('',*,*,#201642,.T.); +#201642 = EDGE_CURVE('',#201610,#201643,#201645,.T.); +#201643 = VERTEX_POINT('',#201644); +#201644 = CARTESIAN_POINT('',(145.841422,-76.18,1.545)); +#201645 = LINE('',#201646,#201647); +#201646 = CARTESIAN_POINT('',(146.769509,-76.178079,1.545)); +#201647 = VECTOR('',#201648,1.); +#201648 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#201649 = ORIENTED_EDGE('',*,*,#201650,.F.); +#201650 = EDGE_CURVE('',#201651,#201643,#201653,.T.); +#201651 = VERTEX_POINT('',#201652); +#201652 = CARTESIAN_POINT('',(145.841422,-76.18,1.51)); +#201653 = LINE('',#201654,#201655); +#201654 = CARTESIAN_POINT('',(145.841422,-76.18,1.51)); +#201655 = VECTOR('',#201656,1.); +#201656 = DIRECTION('',(0.,0.,1.)); +#201657 = ORIENTED_EDGE('',*,*,#201658,.F.); +#201658 = EDGE_CURVE('',#201619,#201651,#201659,.T.); +#201659 = LINE('',#201660,#201661); +#201660 = CARTESIAN_POINT('',(146.769509,-76.178079,1.51)); +#201661 = VECTOR('',#201662,1.); +#201662 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#201663 = PLANE('',#201664); +#201664 = AXIS2_PLACEMENT_3D('',#201665,#201666,#201667); +#201665 = CARTESIAN_POINT('',(146.769509,-76.178079,1.51)); +#201666 = DIRECTION('',(2.069844621223E-03,-0.999997857869,0.)); +#201667 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#201668 = ADVANCED_FACE('',(#201669),#201694,.T.); +#201669 = FACE_BOUND('',#201670,.T.); +#201670 = EDGE_LOOP('',(#201671,#201672,#201680,#201688)); +#201671 = ORIENTED_EDGE('',*,*,#201650,.T.); +#201672 = ORIENTED_EDGE('',*,*,#201673,.T.); +#201673 = EDGE_CURVE('',#201643,#201674,#201676,.T.); +#201674 = VERTEX_POINT('',#201675); +#201675 = CARTESIAN_POINT('',(145.221028,-76.800394,1.545)); +#201676 = LINE('',#201677,#201678); +#201677 = CARTESIAN_POINT('',(145.841422,-76.18,1.545)); +#201678 = VECTOR('',#201679,1.); +#201679 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#201680 = ORIENTED_EDGE('',*,*,#201681,.F.); +#201681 = EDGE_CURVE('',#201682,#201674,#201684,.T.); +#201682 = VERTEX_POINT('',#201683); +#201683 = CARTESIAN_POINT('',(145.221028,-76.800394,1.51)); +#201684 = LINE('',#201685,#201686); +#201685 = CARTESIAN_POINT('',(145.221028,-76.800394,1.51)); +#201686 = VECTOR('',#201687,1.); +#201687 = DIRECTION('',(0.,0.,1.)); +#201688 = ORIENTED_EDGE('',*,*,#201689,.F.); +#201689 = EDGE_CURVE('',#201651,#201682,#201690,.T.); +#201690 = LINE('',#201691,#201692); +#201691 = CARTESIAN_POINT('',(145.841422,-76.18,1.51)); +#201692 = VECTOR('',#201693,1.); +#201693 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#201694 = PLANE('',#201695); +#201695 = AXIS2_PLACEMENT_3D('',#201696,#201697,#201698); +#201696 = CARTESIAN_POINT('',(145.841422,-76.18,1.51)); +#201697 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201698 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#201699 = ADVANCED_FACE('',(#201700),#201725,.T.); +#201700 = FACE_BOUND('',#201701,.T.); +#201701 = EDGE_LOOP('',(#201702,#201703,#201711,#201719)); +#201702 = ORIENTED_EDGE('',*,*,#201681,.T.); +#201703 = ORIENTED_EDGE('',*,*,#201704,.T.); +#201704 = EDGE_CURVE('',#201674,#201705,#201707,.T.); +#201705 = VERTEX_POINT('',#201706); +#201706 = CARTESIAN_POINT('',(145.238006,-76.817372,1.545)); +#201707 = LINE('',#201708,#201709); +#201708 = CARTESIAN_POINT('',(145.221028,-76.800394,1.545)); +#201709 = VECTOR('',#201710,1.); +#201710 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#201711 = ORIENTED_EDGE('',*,*,#201712,.F.); +#201712 = EDGE_CURVE('',#201713,#201705,#201715,.T.); +#201713 = VERTEX_POINT('',#201714); +#201714 = CARTESIAN_POINT('',(145.238006,-76.817372,1.51)); +#201715 = LINE('',#201716,#201717); +#201716 = CARTESIAN_POINT('',(145.238006,-76.817372,1.51)); +#201717 = VECTOR('',#201718,1.); +#201718 = DIRECTION('',(0.,0.,1.)); +#201719 = ORIENTED_EDGE('',*,*,#201720,.F.); +#201720 = EDGE_CURVE('',#201682,#201713,#201721,.T.); +#201721 = LINE('',#201722,#201723); +#201722 = CARTESIAN_POINT('',(145.221028,-76.800394,1.51)); +#201723 = VECTOR('',#201724,1.); +#201724 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#201725 = PLANE('',#201726); +#201726 = AXIS2_PLACEMENT_3D('',#201727,#201728,#201729); +#201727 = CARTESIAN_POINT('',(145.221028,-76.800394,1.51)); +#201728 = DIRECTION('',(0.707106781186,0.707106781187,-0.)); +#201729 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#201730 = ADVANCED_FACE('',(#201731),#201758,.T.); +#201731 = FACE_BOUND('',#201732,.T.); +#201732 = EDGE_LOOP('',(#201733,#201734,#201743,#201751)); +#201733 = ORIENTED_EDGE('',*,*,#201712,.T.); +#201734 = ORIENTED_EDGE('',*,*,#201735,.T.); +#201735 = EDGE_CURVE('',#201705,#201736,#201738,.T.); +#201736 = VERTEX_POINT('',#201737); +#201737 = CARTESIAN_POINT('',(145.036011,-76.702567,1.545)); +#201738 = CIRCLE('',#201739,0.299867256762); +#201739 = AXIS2_PLACEMENT_3D('',#201740,#201741,#201742); +#201740 = CARTESIAN_POINT('',(145.00040781372,-77.00031317513,1.545)); +#201741 = DIRECTION('',(0.,0.,-1.)); +#201742 = DIRECTION('',(0.792344548842,0.610073861036,0.)); +#201743 = ORIENTED_EDGE('',*,*,#201744,.F.); +#201744 = EDGE_CURVE('',#201745,#201736,#201747,.T.); +#201745 = VERTEX_POINT('',#201746); +#201746 = CARTESIAN_POINT('',(145.036011,-76.702567,1.51)); +#201747 = LINE('',#201748,#201749); +#201748 = CARTESIAN_POINT('',(145.036011,-76.702567,1.51)); +#201749 = VECTOR('',#201750,1.); +#201750 = DIRECTION('',(0.,0.,1.)); +#201751 = ORIENTED_EDGE('',*,*,#201752,.F.); +#201752 = EDGE_CURVE('',#201713,#201745,#201753,.T.); +#201753 = CIRCLE('',#201754,0.299867256762); +#201754 = AXIS2_PLACEMENT_3D('',#201755,#201756,#201757); +#201755 = CARTESIAN_POINT('',(145.00040781372,-77.00031317513,1.51)); +#201756 = DIRECTION('',(0.,0.,-1.)); +#201757 = DIRECTION('',(0.792344548842,0.610073861036,0.)); +#201758 = CYLINDRICAL_SURFACE('',#201759,0.299867256762); +#201759 = AXIS2_PLACEMENT_3D('',#201760,#201761,#201762); +#201760 = CARTESIAN_POINT('',(145.00040781372,-77.00031317513,1.51)); +#201761 = DIRECTION('',(0.,0.,-1.)); +#201762 = DIRECTION('',(0.792344548842,0.610073861036,0.)); +#201763 = ADVANCED_FACE('',(#201764),#201780,.T.); +#201764 = FACE_BOUND('',#201765,.T.); +#201765 = EDGE_LOOP('',(#201766,#201767,#201773,#201774)); +#201766 = ORIENTED_EDGE('',*,*,#201744,.T.); +#201767 = ORIENTED_EDGE('',*,*,#201768,.T.); +#201768 = EDGE_CURVE('',#201736,#201540,#201769,.T.); +#201769 = LINE('',#201770,#201771); +#201770 = CARTESIAN_POINT('',(145.036011,-76.702567,1.545)); +#201771 = VECTOR('',#201772,1.); +#201772 = DIRECTION('',(0.708464537541,0.705746412706,0.)); +#201773 = ORIENTED_EDGE('',*,*,#201537,.F.); +#201774 = ORIENTED_EDGE('',*,*,#201775,.F.); +#201775 = EDGE_CURVE('',#201745,#201538,#201776,.T.); +#201776 = LINE('',#201777,#201778); +#201777 = CARTESIAN_POINT('',(145.036011,-76.702567,1.51)); +#201778 = VECTOR('',#201779,1.); +#201779 = DIRECTION('',(0.708464537541,0.705746412706,0.)); +#201780 = PLANE('',#201781); +#201781 = AXIS2_PLACEMENT_3D('',#201782,#201783,#201784); +#201782 = CARTESIAN_POINT('',(145.036011,-76.702567,1.51)); +#201783 = DIRECTION('',(-0.705746412706,0.708464537541,0.)); +#201784 = DIRECTION('',(0.708464537541,0.705746412706,0.)); +#201785 = ADVANCED_FACE('',(#201786),#201813,.F.); +#201786 = FACE_BOUND('',#201787,.T.); +#201787 = EDGE_LOOP('',(#201788,#201798,#201805,#201806)); +#201788 = ORIENTED_EDGE('',*,*,#201789,.T.); +#201789 = EDGE_CURVE('',#201790,#201792,#201794,.T.); +#201790 = VERTEX_POINT('',#201791); +#201791 = CARTESIAN_POINT('',(145.137255,-77.,1.51)); +#201792 = VERTEX_POINT('',#201793); +#201793 = CARTESIAN_POINT('',(145.137255,-77.,1.545)); +#201794 = LINE('',#201795,#201796); +#201795 = CARTESIAN_POINT('',(145.137255,-77.,1.51)); +#201796 = VECTOR('',#201797,1.); +#201797 = DIRECTION('',(0.,0.,1.)); +#201798 = ORIENTED_EDGE('',*,*,#201799,.T.); +#201799 = EDGE_CURVE('',#201792,#201792,#201800,.T.); +#201800 = CIRCLE('',#201801,0.137255); +#201801 = AXIS2_PLACEMENT_3D('',#201802,#201803,#201804); +#201802 = CARTESIAN_POINT('',(145.,-77.,1.545)); +#201803 = DIRECTION('',(0.,0.,1.)); +#201804 = DIRECTION('',(1.,0.,-0.)); +#201805 = ORIENTED_EDGE('',*,*,#201789,.F.); +#201806 = ORIENTED_EDGE('',*,*,#201807,.F.); +#201807 = EDGE_CURVE('',#201790,#201790,#201808,.T.); +#201808 = CIRCLE('',#201809,0.137255); +#201809 = AXIS2_PLACEMENT_3D('',#201810,#201811,#201812); +#201810 = CARTESIAN_POINT('',(145.,-77.,1.51)); +#201811 = DIRECTION('',(0.,0.,1.)); +#201812 = DIRECTION('',(1.,0.,-0.)); +#201813 = CYLINDRICAL_SURFACE('',#201814,0.137255); +#201814 = AXIS2_PLACEMENT_3D('',#201815,#201816,#201817); +#201815 = CARTESIAN_POINT('',(145.,-77.,1.51)); +#201816 = DIRECTION('',(-0.,-0.,-1.)); +#201817 = DIRECTION('',(1.,0.,-0.)); +#201818 = ADVANCED_FACE('',(#201819,#201829),#201832,.F.); +#201819 = FACE_BOUND('',#201820,.T.); +#201820 = EDGE_LOOP('',(#201821,#201822,#201823,#201824,#201825,#201826, + #201827,#201828)); +#201821 = ORIENTED_EDGE('',*,*,#201563,.T.); +#201822 = ORIENTED_EDGE('',*,*,#201594,.T.); +#201823 = ORIENTED_EDGE('',*,*,#201626,.T.); +#201824 = ORIENTED_EDGE('',*,*,#201658,.T.); +#201825 = ORIENTED_EDGE('',*,*,#201689,.T.); +#201826 = ORIENTED_EDGE('',*,*,#201720,.T.); +#201827 = ORIENTED_EDGE('',*,*,#201752,.T.); +#201828 = ORIENTED_EDGE('',*,*,#201775,.T.); +#201829 = FACE_BOUND('',#201830,.T.); +#201830 = EDGE_LOOP('',(#201831)); +#201831 = ORIENTED_EDGE('',*,*,#201807,.T.); +#201832 = PLANE('',#201833); +#201833 = AXIS2_PLACEMENT_3D('',#201834,#201835,#201836); +#201834 = CARTESIAN_POINT('',(0.,0.,1.51)); +#201835 = DIRECTION('',(0.,0.,1.)); +#201836 = DIRECTION('',(1.,0.,-0.)); +#201837 = ADVANCED_FACE('',(#201838,#201848),#201851,.T.); +#201838 = FACE_BOUND('',#201839,.F.); +#201839 = EDGE_LOOP('',(#201840,#201841,#201842,#201843,#201844,#201845, + #201846,#201847)); +#201840 = ORIENTED_EDGE('',*,*,#201547,.T.); +#201841 = ORIENTED_EDGE('',*,*,#201578,.T.); +#201842 = ORIENTED_EDGE('',*,*,#201609,.T.); +#201843 = ORIENTED_EDGE('',*,*,#201642,.T.); +#201844 = ORIENTED_EDGE('',*,*,#201673,.T.); +#201845 = ORIENTED_EDGE('',*,*,#201704,.T.); +#201846 = ORIENTED_EDGE('',*,*,#201735,.T.); +#201847 = ORIENTED_EDGE('',*,*,#201768,.T.); +#201848 = FACE_BOUND('',#201849,.F.); +#201849 = EDGE_LOOP('',(#201850)); +#201850 = ORIENTED_EDGE('',*,*,#201799,.T.); +#201851 = PLANE('',#201852); +#201852 = AXIS2_PLACEMENT_3D('',#201853,#201854,#201855); +#201853 = CARTESIAN_POINT('',(0.,0.,1.545)); +#201854 = DIRECTION('',(0.,0.,1.)); +#201855 = DIRECTION('',(1.,0.,-0.)); +#201856 = MANIFOLD_SOLID_BREP('',#201857); +#201857 = CLOSED_SHELL('',(#201858,#201898,#201929,#201960,#201991, + #202022,#202055,#202086,#202117,#202148,#202179,#202210,#202241, + #202274,#202296,#202329,#202362,#202390)); +#201858 = ADVANCED_FACE('',(#201859),#201893,.F.); +#201859 = FACE_BOUND('',#201860,.F.); +#201860 = EDGE_LOOP('',(#201861,#201871,#201879,#201887)); +#201861 = ORIENTED_EDGE('',*,*,#201862,.T.); +#201862 = EDGE_CURVE('',#201863,#201865,#201867,.T.); +#201863 = VERTEX_POINT('',#201864); +#201864 = CARTESIAN_POINT('',(145.2695,-77.128078,0.)); +#201865 = VERTEX_POINT('',#201866); +#201866 = CARTESIAN_POINT('',(145.2695,-77.128078,-3.5E-02)); +#201867 = LINE('',#201868,#201869); +#201868 = CARTESIAN_POINT('',(145.2695,-77.128078,0.)); +#201869 = VECTOR('',#201870,1.); +#201870 = DIRECTION('',(0.,0.,-1.)); +#201871 = ORIENTED_EDGE('',*,*,#201872,.T.); +#201872 = EDGE_CURVE('',#201865,#201873,#201875,.T.); +#201873 = VERTEX_POINT('',#201874); +#201874 = CARTESIAN_POINT('',(146.583147,-78.444443,-3.5E-02)); +#201875 = LINE('',#201876,#201877); +#201876 = CARTESIAN_POINT('',(145.2695,-77.128078,-3.5E-02)); +#201877 = VECTOR('',#201878,1.); +#201878 = DIRECTION('',(0.706375640678,-0.707837166485,0.)); +#201879 = ORIENTED_EDGE('',*,*,#201880,.F.); +#201880 = EDGE_CURVE('',#201881,#201873,#201883,.T.); +#201881 = VERTEX_POINT('',#201882); +#201882 = CARTESIAN_POINT('',(146.583147,-78.444443,0.)); +#201883 = LINE('',#201884,#201885); +#201884 = CARTESIAN_POINT('',(146.583147,-78.444443,0.)); +#201885 = VECTOR('',#201886,1.); +#201886 = DIRECTION('',(0.,0.,-1.)); +#201887 = ORIENTED_EDGE('',*,*,#201888,.F.); +#201888 = EDGE_CURVE('',#201863,#201881,#201889,.T.); +#201889 = LINE('',#201890,#201891); +#201890 = CARTESIAN_POINT('',(145.2695,-77.128078,0.)); +#201891 = VECTOR('',#201892,1.); +#201892 = DIRECTION('',(0.706375640678,-0.707837166485,0.)); +#201893 = PLANE('',#201894); +#201894 = AXIS2_PLACEMENT_3D('',#201895,#201896,#201897); +#201895 = CARTESIAN_POINT('',(145.2695,-77.128078,0.)); +#201896 = DIRECTION('',(-0.707837166485,-0.706375640678,-0.)); +#201897 = DIRECTION('',(0.706375640678,-0.707837166485,0.)); +#201898 = ADVANCED_FACE('',(#201899),#201924,.F.); +#201899 = FACE_BOUND('',#201900,.F.); +#201900 = EDGE_LOOP('',(#201901,#201902,#201910,#201918)); +#201901 = ORIENTED_EDGE('',*,*,#201880,.T.); +#201902 = ORIENTED_EDGE('',*,*,#201903,.T.); +#201903 = EDGE_CURVE('',#201873,#201904,#201906,.T.); +#201904 = VERTEX_POINT('',#201905); +#201905 = CARTESIAN_POINT('',(146.598079,-78.480491,-3.5E-02)); +#201906 = LINE('',#201907,#201908); +#201907 = CARTESIAN_POINT('',(146.583147,-78.444443,-3.5E-02)); +#201908 = VECTOR('',#201909,1.); +#201909 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#201910 = ORIENTED_EDGE('',*,*,#201911,.F.); +#201911 = EDGE_CURVE('',#201912,#201904,#201914,.T.); +#201912 = VERTEX_POINT('',#201913); +#201913 = CARTESIAN_POINT('',(146.598079,-78.480491,0.)); +#201914 = LINE('',#201915,#201916); +#201915 = CARTESIAN_POINT('',(146.598079,-78.480491,0.)); +#201916 = VECTOR('',#201917,1.); +#201917 = DIRECTION('',(0.,0.,-1.)); +#201918 = ORIENTED_EDGE('',*,*,#201919,.F.); +#201919 = EDGE_CURVE('',#201881,#201912,#201920,.T.); +#201920 = LINE('',#201921,#201922); +#201921 = CARTESIAN_POINT('',(146.583147,-78.444443,0.)); +#201922 = VECTOR('',#201923,1.); +#201923 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#201924 = PLANE('',#201925); +#201925 = AXIS2_PLACEMENT_3D('',#201926,#201927,#201928); +#201926 = CARTESIAN_POINT('',(146.583147,-78.444443,0.)); +#201927 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#201928 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#201929 = ADVANCED_FACE('',(#201930),#201955,.F.); +#201930 = FACE_BOUND('',#201931,.F.); +#201931 = EDGE_LOOP('',(#201932,#201933,#201941,#201949)); +#201932 = ORIENTED_EDGE('',*,*,#201911,.T.); +#201933 = ORIENTED_EDGE('',*,*,#201934,.T.); +#201934 = EDGE_CURVE('',#201904,#201935,#201937,.T.); +#201935 = VERTEX_POINT('',#201936); +#201936 = CARTESIAN_POINT('',(146.6,-88.261521,-3.5E-02)); +#201937 = LINE('',#201938,#201939); +#201938 = CARTESIAN_POINT('',(146.598079,-78.480491,-3.5E-02)); +#201939 = VECTOR('',#201940,1.); +#201940 = DIRECTION('',(1.964005797888E-04,-0.999999980713,0.)); +#201941 = ORIENTED_EDGE('',*,*,#201942,.F.); +#201942 = EDGE_CURVE('',#201943,#201935,#201945,.T.); +#201943 = VERTEX_POINT('',#201944); +#201944 = CARTESIAN_POINT('',(146.6,-88.261521,0.)); +#201945 = LINE('',#201946,#201947); +#201946 = CARTESIAN_POINT('',(146.6,-88.261521,0.)); +#201947 = VECTOR('',#201948,1.); +#201948 = DIRECTION('',(0.,0.,-1.)); +#201949 = ORIENTED_EDGE('',*,*,#201950,.F.); +#201950 = EDGE_CURVE('',#201912,#201943,#201951,.T.); +#201951 = LINE('',#201952,#201953); +#201952 = CARTESIAN_POINT('',(146.598079,-78.480491,0.)); +#201953 = VECTOR('',#201954,1.); +#201954 = DIRECTION('',(1.964005797888E-04,-0.999999980713,0.)); +#201955 = PLANE('',#201956); +#201956 = AXIS2_PLACEMENT_3D('',#201957,#201958,#201959); +#201957 = CARTESIAN_POINT('',(146.598079,-78.480491,0.)); +#201958 = DIRECTION('',(-0.999999980713,-1.964005797888E-04,-0.)); +#201959 = DIRECTION('',(1.964005797888E-04,-0.999999980713,0.)); +#201960 = ADVANCED_FACE('',(#201961),#201986,.F.); +#201961 = FACE_BOUND('',#201962,.F.); +#201962 = EDGE_LOOP('',(#201963,#201964,#201972,#201980)); +#201963 = ORIENTED_EDGE('',*,*,#201942,.T.); +#201964 = ORIENTED_EDGE('',*,*,#201965,.T.); +#201965 = EDGE_CURVE('',#201935,#201966,#201968,.T.); +#201966 = VERTEX_POINT('',#201967); +#201967 = CARTESIAN_POINT('',(148.371921,-90.033442,-3.5E-02)); +#201968 = LINE('',#201969,#201970); +#201969 = CARTESIAN_POINT('',(146.6,-88.261521,-3.5E-02)); +#201970 = VECTOR('',#201971,1.); +#201971 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201972 = ORIENTED_EDGE('',*,*,#201973,.F.); +#201973 = EDGE_CURVE('',#201974,#201966,#201976,.T.); +#201974 = VERTEX_POINT('',#201975); +#201975 = CARTESIAN_POINT('',(148.371921,-90.033442,0.)); +#201976 = LINE('',#201977,#201978); +#201977 = CARTESIAN_POINT('',(148.371921,-90.033442,0.)); +#201978 = VECTOR('',#201979,1.); +#201979 = DIRECTION('',(0.,0.,-1.)); +#201980 = ORIENTED_EDGE('',*,*,#201981,.F.); +#201981 = EDGE_CURVE('',#201943,#201974,#201982,.T.); +#201982 = LINE('',#201983,#201984); +#201983 = CARTESIAN_POINT('',(146.6,-88.261521,0.)); +#201984 = VECTOR('',#201985,1.); +#201985 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201986 = PLANE('',#201987); +#201987 = AXIS2_PLACEMENT_3D('',#201988,#201989,#201990); +#201988 = CARTESIAN_POINT('',(146.6,-88.261521,0.)); +#201989 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#201990 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#201991 = ADVANCED_FACE('',(#201992),#202017,.F.); +#201992 = FACE_BOUND('',#201993,.F.); +#201993 = EDGE_LOOP('',(#201994,#201995,#202003,#202011)); +#201994 = ORIENTED_EDGE('',*,*,#201973,.T.); +#201995 = ORIENTED_EDGE('',*,*,#201996,.T.); +#201996 = EDGE_CURVE('',#201966,#201997,#201999,.T.); +#201997 = VERTEX_POINT('',#201998); +#201998 = CARTESIAN_POINT('',(148.385195,-90.025779,-3.5E-02)); +#201999 = LINE('',#202000,#202001); +#202000 = CARTESIAN_POINT('',(148.371921,-90.033442,-3.5E-02)); +#202001 = VECTOR('',#202002,1.); +#202002 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#202003 = ORIENTED_EDGE('',*,*,#202004,.F.); +#202004 = EDGE_CURVE('',#202005,#201997,#202007,.T.); +#202005 = VERTEX_POINT('',#202006); +#202006 = CARTESIAN_POINT('',(148.385195,-90.025779,0.)); +#202007 = LINE('',#202008,#202009); +#202008 = CARTESIAN_POINT('',(148.385195,-90.025779,0.)); +#202009 = VECTOR('',#202010,1.); +#202010 = DIRECTION('',(0.,0.,-1.)); +#202011 = ORIENTED_EDGE('',*,*,#202012,.F.); +#202012 = EDGE_CURVE('',#201974,#202005,#202013,.T.); +#202013 = LINE('',#202014,#202015); +#202014 = CARTESIAN_POINT('',(148.371921,-90.033442,0.)); +#202015 = VECTOR('',#202016,1.); +#202016 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#202017 = PLANE('',#202018); +#202018 = AXIS2_PLACEMENT_3D('',#202019,#202020,#202021); +#202019 = CARTESIAN_POINT('',(148.371921,-90.033442,0.)); +#202020 = DIRECTION('',(0.499963423545,-0.866046520181,0.)); +#202021 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#202022 = ADVANCED_FACE('',(#202023),#202050,.T.); +#202023 = FACE_BOUND('',#202024,.F.); +#202024 = EDGE_LOOP('',(#202025,#202026,#202035,#202043)); +#202025 = ORIENTED_EDGE('',*,*,#202004,.T.); +#202026 = ORIENTED_EDGE('',*,*,#202027,.T.); +#202027 = EDGE_CURVE('',#201997,#202028,#202030,.T.); +#202028 = VERTEX_POINT('',#202029); +#202029 = CARTESIAN_POINT('',(148.222836,-90.188138,-3.5E-02)); +#202030 = CIRCLE('',#202031,0.299999934501); +#202031 = AXIS2_PLACEMENT_3D('',#202032,#202033,#202034); +#202032 = CARTESIAN_POINT('',(148.4999998594,-90.3029428594,-3.5E-02)); +#202033 = DIRECTION('',(-0.,0.,-1.)); +#202034 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#202035 = ORIENTED_EDGE('',*,*,#202036,.F.); +#202036 = EDGE_CURVE('',#202037,#202028,#202039,.T.); +#202037 = VERTEX_POINT('',#202038); +#202038 = CARTESIAN_POINT('',(148.222836,-90.188138,0.)); +#202039 = LINE('',#202040,#202041); +#202040 = CARTESIAN_POINT('',(148.222836,-90.188138,0.)); +#202041 = VECTOR('',#202042,1.); +#202042 = DIRECTION('',(0.,0.,-1.)); +#202043 = ORIENTED_EDGE('',*,*,#202044,.F.); +#202044 = EDGE_CURVE('',#202005,#202037,#202045,.T.); +#202045 = CIRCLE('',#202046,0.299999934501); +#202046 = AXIS2_PLACEMENT_3D('',#202047,#202048,#202049); +#202047 = CARTESIAN_POINT('',(148.4999998594,-90.3029428594,0.)); +#202048 = DIRECTION('',(-0.,0.,-1.)); +#202049 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#202050 = CYLINDRICAL_SURFACE('',#202051,0.299999934501); +#202051 = AXIS2_PLACEMENT_3D('',#202052,#202053,#202054); +#202052 = CARTESIAN_POINT('',(148.4999998594,-90.3029428594,0.)); +#202053 = DIRECTION('',(0.,-0.,1.)); +#202054 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#202055 = ADVANCED_FACE('',(#202056),#202081,.F.); +#202056 = FACE_BOUND('',#202057,.F.); +#202057 = EDGE_LOOP('',(#202058,#202059,#202067,#202075)); +#202058 = ORIENTED_EDGE('',*,*,#202036,.T.); +#202059 = ORIENTED_EDGE('',*,*,#202060,.T.); +#202060 = EDGE_CURVE('',#202028,#202061,#202063,.T.); +#202061 = VERTEX_POINT('',#202062); +#202062 = CARTESIAN_POINT('',(148.230499,-90.174864,-3.5E-02)); +#202063 = LINE('',#202064,#202065); +#202064 = CARTESIAN_POINT('',(148.222836,-90.188138,-3.5E-02)); +#202065 = VECTOR('',#202066,1.); +#202066 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#202067 = ORIENTED_EDGE('',*,*,#202068,.F.); +#202068 = EDGE_CURVE('',#202069,#202061,#202071,.T.); +#202069 = VERTEX_POINT('',#202070); +#202070 = CARTESIAN_POINT('',(148.230499,-90.174864,0.)); +#202071 = LINE('',#202072,#202073); +#202072 = CARTESIAN_POINT('',(148.230499,-90.174864,0.)); +#202073 = VECTOR('',#202074,1.); +#202074 = DIRECTION('',(0.,0.,-1.)); +#202075 = ORIENTED_EDGE('',*,*,#202076,.F.); +#202076 = EDGE_CURVE('',#202037,#202069,#202077,.T.); +#202077 = LINE('',#202078,#202079); +#202078 = CARTESIAN_POINT('',(148.222836,-90.188138,0.)); +#202079 = VECTOR('',#202080,1.); +#202080 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#202081 = PLANE('',#202082); +#202082 = AXIS2_PLACEMENT_3D('',#202083,#202084,#202085); +#202083 = CARTESIAN_POINT('',(148.222836,-90.188138,0.)); +#202084 = DIRECTION('',(0.86604652018,-0.499963423546,0.)); +#202085 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#202086 = ADVANCED_FACE('',(#202087),#202112,.F.); +#202087 = FACE_BOUND('',#202088,.F.); +#202088 = EDGE_LOOP('',(#202089,#202090,#202098,#202106)); +#202089 = ORIENTED_EDGE('',*,*,#202068,.T.); +#202090 = ORIENTED_EDGE('',*,*,#202091,.T.); +#202091 = EDGE_CURVE('',#202061,#202092,#202094,.T.); +#202092 = VERTEX_POINT('',#202093); +#202093 = CARTESIAN_POINT('',(146.416853,-88.3585,-3.5E-02)); +#202094 = LINE('',#202095,#202096); +#202095 = CARTESIAN_POINT('',(148.230499,-90.174864,-3.5E-02)); +#202096 = VECTOR('',#202097,1.); +#202097 = DIRECTION('',(-0.706577131071,0.707636034871,0.)); +#202098 = ORIENTED_EDGE('',*,*,#202099,.F.); +#202099 = EDGE_CURVE('',#202100,#202092,#202102,.T.); +#202100 = VERTEX_POINT('',#202101); +#202101 = CARTESIAN_POINT('',(146.416853,-88.3585,0.)); +#202102 = LINE('',#202103,#202104); +#202103 = CARTESIAN_POINT('',(146.416853,-88.3585,0.)); +#202104 = VECTOR('',#202105,1.); +#202105 = DIRECTION('',(0.,0.,-1.)); +#202106 = ORIENTED_EDGE('',*,*,#202107,.F.); +#202107 = EDGE_CURVE('',#202069,#202100,#202108,.T.); +#202108 = LINE('',#202109,#202110); +#202109 = CARTESIAN_POINT('',(148.230499,-90.174864,0.)); +#202110 = VECTOR('',#202111,1.); +#202111 = DIRECTION('',(-0.706577131071,0.707636034871,0.)); +#202112 = PLANE('',#202113); +#202113 = AXIS2_PLACEMENT_3D('',#202114,#202115,#202116); +#202114 = CARTESIAN_POINT('',(148.230499,-90.174864,0.)); +#202115 = DIRECTION('',(0.707636034871,0.706577131071,0.)); +#202116 = DIRECTION('',(-0.706577131071,0.707636034871,0.)); +#202117 = ADVANCED_FACE('',(#202118),#202143,.F.); +#202118 = FACE_BOUND('',#202119,.F.); +#202119 = EDGE_LOOP('',(#202120,#202121,#202129,#202137)); +#202120 = ORIENTED_EDGE('',*,*,#202099,.T.); +#202121 = ORIENTED_EDGE('',*,*,#202122,.T.); +#202122 = EDGE_CURVE('',#202092,#202123,#202125,.T.); +#202123 = VERTEX_POINT('',#202124); +#202124 = CARTESIAN_POINT('',(146.401921,-88.322452,-3.5E-02)); +#202125 = LINE('',#202126,#202127); +#202126 = CARTESIAN_POINT('',(146.416853,-88.3585,-3.5E-02)); +#202127 = VECTOR('',#202128,1.); +#202128 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#202129 = ORIENTED_EDGE('',*,*,#202130,.F.); +#202130 = EDGE_CURVE('',#202131,#202123,#202133,.T.); +#202131 = VERTEX_POINT('',#202132); +#202132 = CARTESIAN_POINT('',(146.401921,-88.322452,0.)); +#202133 = LINE('',#202134,#202135); +#202134 = CARTESIAN_POINT('',(146.401921,-88.322452,0.)); +#202135 = VECTOR('',#202136,1.); +#202136 = DIRECTION('',(0.,0.,-1.)); +#202137 = ORIENTED_EDGE('',*,*,#202138,.F.); +#202138 = EDGE_CURVE('',#202100,#202131,#202139,.T.); +#202139 = LINE('',#202140,#202141); +#202140 = CARTESIAN_POINT('',(146.416853,-88.3585,0.)); +#202141 = VECTOR('',#202142,1.); +#202142 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#202143 = PLANE('',#202144); +#202144 = AXIS2_PLACEMENT_3D('',#202145,#202146,#202147); +#202145 = CARTESIAN_POINT('',(146.416853,-88.3585,0.)); +#202146 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#202147 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#202148 = ADVANCED_FACE('',(#202149),#202174,.F.); +#202149 = FACE_BOUND('',#202150,.F.); +#202150 = EDGE_LOOP('',(#202151,#202152,#202160,#202168)); +#202151 = ORIENTED_EDGE('',*,*,#202130,.T.); +#202152 = ORIENTED_EDGE('',*,*,#202153,.T.); +#202153 = EDGE_CURVE('',#202123,#202154,#202156,.T.); +#202154 = VERTEX_POINT('',#202155); +#202155 = CARTESIAN_POINT('',(146.4,-78.541421,-3.5E-02)); +#202156 = LINE('',#202157,#202158); +#202157 = CARTESIAN_POINT('',(146.401921,-88.322452,-3.5E-02)); +#202158 = VECTOR('',#202159,1.); +#202159 = DIRECTION('',(-1.964005597091E-04,0.999999980713,0.)); +#202160 = ORIENTED_EDGE('',*,*,#202161,.F.); +#202161 = EDGE_CURVE('',#202162,#202154,#202164,.T.); +#202162 = VERTEX_POINT('',#202163); +#202163 = CARTESIAN_POINT('',(146.4,-78.541421,0.)); +#202164 = LINE('',#202165,#202166); +#202165 = CARTESIAN_POINT('',(146.4,-78.541421,0.)); +#202166 = VECTOR('',#202167,1.); +#202167 = DIRECTION('',(0.,0.,-1.)); +#202168 = ORIENTED_EDGE('',*,*,#202169,.F.); +#202169 = EDGE_CURVE('',#202131,#202162,#202170,.T.); +#202170 = LINE('',#202171,#202172); +#202171 = CARTESIAN_POINT('',(146.401921,-88.322452,0.)); +#202172 = VECTOR('',#202173,1.); +#202173 = DIRECTION('',(-1.964005597091E-04,0.999999980713,0.)); +#202174 = PLANE('',#202175); +#202175 = AXIS2_PLACEMENT_3D('',#202176,#202177,#202178); +#202176 = CARTESIAN_POINT('',(146.401921,-88.322452,0.)); +#202177 = DIRECTION('',(0.999999980713,1.964005597091E-04,0.)); +#202178 = DIRECTION('',(-1.964005597091E-04,0.999999980713,0.)); +#202179 = ADVANCED_FACE('',(#202180),#202205,.F.); +#202180 = FACE_BOUND('',#202181,.F.); +#202181 = EDGE_LOOP('',(#202182,#202183,#202191,#202199)); +#202182 = ORIENTED_EDGE('',*,*,#202161,.T.); +#202183 = ORIENTED_EDGE('',*,*,#202184,.T.); +#202184 = EDGE_CURVE('',#202154,#202185,#202187,.T.); +#202185 = VERTEX_POINT('',#202186); +#202186 = CARTESIAN_POINT('',(145.128078,-77.2695,-3.5E-02)); +#202187 = LINE('',#202188,#202189); +#202188 = CARTESIAN_POINT('',(146.4,-78.541421,-3.5E-02)); +#202189 = VECTOR('',#202190,1.); +#202190 = DIRECTION('',(-0.707107059154,0.707106503219,0.)); +#202191 = ORIENTED_EDGE('',*,*,#202192,.F.); +#202192 = EDGE_CURVE('',#202193,#202185,#202195,.T.); +#202193 = VERTEX_POINT('',#202194); +#202194 = CARTESIAN_POINT('',(145.128078,-77.2695,0.)); +#202195 = LINE('',#202196,#202197); +#202196 = CARTESIAN_POINT('',(145.128078,-77.2695,0.)); +#202197 = VECTOR('',#202198,1.); +#202198 = DIRECTION('',(0.,0.,-1.)); +#202199 = ORIENTED_EDGE('',*,*,#202200,.F.); +#202200 = EDGE_CURVE('',#202162,#202193,#202201,.T.); +#202201 = LINE('',#202202,#202203); +#202202 = CARTESIAN_POINT('',(146.4,-78.541421,0.)); +#202203 = VECTOR('',#202204,1.); +#202204 = DIRECTION('',(-0.707107059154,0.707106503219,0.)); +#202205 = PLANE('',#202206); +#202206 = AXIS2_PLACEMENT_3D('',#202207,#202208,#202209); +#202207 = CARTESIAN_POINT('',(146.4,-78.541421,0.)); +#202208 = DIRECTION('',(0.707106503219,0.707107059154,0.)); +#202209 = DIRECTION('',(-0.707107059154,0.707106503219,0.)); +#202210 = ADVANCED_FACE('',(#202211),#202236,.F.); +#202211 = FACE_BOUND('',#202212,.F.); +#202212 = EDGE_LOOP('',(#202213,#202214,#202222,#202230)); +#202213 = ORIENTED_EDGE('',*,*,#202192,.T.); +#202214 = ORIENTED_EDGE('',*,*,#202215,.T.); +#202215 = EDGE_CURVE('',#202185,#202216,#202218,.T.); +#202216 = VERTEX_POINT('',#202217); +#202217 = CARTESIAN_POINT('',(145.114805,-77.277164,-3.5E-02)); +#202218 = LINE('',#202219,#202220); +#202219 = CARTESIAN_POINT('',(145.128078,-77.2695,-3.5E-02)); +#202220 = VECTOR('',#202221,1.); +#202221 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#202222 = ORIENTED_EDGE('',*,*,#202223,.F.); +#202223 = EDGE_CURVE('',#202224,#202216,#202226,.T.); +#202224 = VERTEX_POINT('',#202225); +#202225 = CARTESIAN_POINT('',(145.114805,-77.277164,0.)); +#202226 = LINE('',#202227,#202228); +#202227 = CARTESIAN_POINT('',(145.114805,-77.277164,0.)); +#202228 = VECTOR('',#202229,1.); +#202229 = DIRECTION('',(0.,0.,-1.)); +#202230 = ORIENTED_EDGE('',*,*,#202231,.F.); +#202231 = EDGE_CURVE('',#202193,#202224,#202232,.T.); +#202232 = LINE('',#202233,#202234); +#202233 = CARTESIAN_POINT('',(145.128078,-77.2695,0.)); +#202234 = VECTOR('',#202235,1.); +#202235 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#202236 = PLANE('',#202237); +#202237 = AXIS2_PLACEMENT_3D('',#202238,#202239,#202240); +#202238 = CARTESIAN_POINT('',(145.128078,-77.2695,0.)); +#202239 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#202240 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#202241 = ADVANCED_FACE('',(#202242),#202269,.T.); +#202242 = FACE_BOUND('',#202243,.F.); +#202243 = EDGE_LOOP('',(#202244,#202245,#202254,#202262)); +#202244 = ORIENTED_EDGE('',*,*,#202223,.T.); +#202245 = ORIENTED_EDGE('',*,*,#202246,.T.); +#202246 = EDGE_CURVE('',#202216,#202247,#202249,.T.); +#202247 = VERTEX_POINT('',#202248); +#202248 = CARTESIAN_POINT('',(145.277164,-77.114805,-3.5E-02)); +#202249 = CIRCLE('',#202250,0.300000118202); +#202250 = AXIS2_PLACEMENT_3D('',#202251,#202252,#202253); +#202251 = CARTESIAN_POINT('',(145.,-77.,-3.5E-02)); +#202252 = DIRECTION('',(0.,0.,-1.)); +#202253 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#202254 = ORIENTED_EDGE('',*,*,#202255,.F.); +#202255 = EDGE_CURVE('',#202256,#202247,#202258,.T.); +#202256 = VERTEX_POINT('',#202257); +#202257 = CARTESIAN_POINT('',(145.277164,-77.114805,0.)); +#202258 = LINE('',#202259,#202260); +#202259 = CARTESIAN_POINT('',(145.277164,-77.114805,0.)); +#202260 = VECTOR('',#202261,1.); +#202261 = DIRECTION('',(0.,0.,-1.)); +#202262 = ORIENTED_EDGE('',*,*,#202263,.F.); +#202263 = EDGE_CURVE('',#202224,#202256,#202264,.T.); +#202264 = CIRCLE('',#202265,0.300000118202); +#202265 = AXIS2_PLACEMENT_3D('',#202266,#202267,#202268); +#202266 = CARTESIAN_POINT('',(145.,-77.,0.)); +#202267 = DIRECTION('',(0.,0.,-1.)); +#202268 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#202269 = CYLINDRICAL_SURFACE('',#202270,0.300000118202); +#202270 = AXIS2_PLACEMENT_3D('',#202271,#202272,#202273); +#202271 = CARTESIAN_POINT('',(145.,-77.,0.)); +#202272 = DIRECTION('',(-0.,-0.,1.)); +#202273 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#202274 = ADVANCED_FACE('',(#202275),#202291,.F.); +#202275 = FACE_BOUND('',#202276,.F.); +#202276 = EDGE_LOOP('',(#202277,#202278,#202284,#202285)); +#202277 = ORIENTED_EDGE('',*,*,#202255,.T.); +#202278 = ORIENTED_EDGE('',*,*,#202279,.T.); +#202279 = EDGE_CURVE('',#202247,#201865,#202280,.T.); +#202280 = LINE('',#202281,#202282); +#202281 = CARTESIAN_POINT('',(145.277164,-77.114805,-3.5E-02)); +#202282 = VECTOR('',#202283,1.); +#202283 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#202284 = ORIENTED_EDGE('',*,*,#201862,.F.); +#202285 = ORIENTED_EDGE('',*,*,#202286,.F.); +#202286 = EDGE_CURVE('',#202256,#201863,#202287,.T.); +#202287 = LINE('',#202288,#202289); +#202288 = CARTESIAN_POINT('',(145.277164,-77.114805,0.)); +#202289 = VECTOR('',#202290,1.); +#202290 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#202291 = PLANE('',#202292); +#202292 = AXIS2_PLACEMENT_3D('',#202293,#202294,#202295); +#202293 = CARTESIAN_POINT('',(145.277164,-77.114805,0.)); +#202294 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#202295 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#202296 = ADVANCED_FACE('',(#202297),#202324,.F.); +#202297 = FACE_BOUND('',#202298,.F.); +#202298 = EDGE_LOOP('',(#202299,#202309,#202316,#202317)); +#202299 = ORIENTED_EDGE('',*,*,#202300,.T.); +#202300 = EDGE_CURVE('',#202301,#202303,#202305,.T.); +#202301 = VERTEX_POINT('',#202302); +#202302 = CARTESIAN_POINT('',(148.637255,-90.302943,0.)); +#202303 = VERTEX_POINT('',#202304); +#202304 = CARTESIAN_POINT('',(148.637255,-90.302943,-3.5E-02)); +#202305 = LINE('',#202306,#202307); +#202306 = CARTESIAN_POINT('',(148.637255,-90.302943,0.)); +#202307 = VECTOR('',#202308,1.); +#202308 = DIRECTION('',(0.,0.,-1.)); +#202309 = ORIENTED_EDGE('',*,*,#202310,.T.); +#202310 = EDGE_CURVE('',#202303,#202303,#202311,.T.); +#202311 = CIRCLE('',#202312,0.137255); +#202312 = AXIS2_PLACEMENT_3D('',#202313,#202314,#202315); +#202313 = CARTESIAN_POINT('',(148.5,-90.302943,-3.5E-02)); +#202314 = DIRECTION('',(0.,0.,1.)); +#202315 = DIRECTION('',(1.,0.,-0.)); +#202316 = ORIENTED_EDGE('',*,*,#202300,.F.); +#202317 = ORIENTED_EDGE('',*,*,#202318,.F.); +#202318 = EDGE_CURVE('',#202301,#202301,#202319,.T.); +#202319 = CIRCLE('',#202320,0.137255); +#202320 = AXIS2_PLACEMENT_3D('',#202321,#202322,#202323); +#202321 = CARTESIAN_POINT('',(148.5,-90.302943,0.)); +#202322 = DIRECTION('',(0.,0.,1.)); +#202323 = DIRECTION('',(1.,0.,-0.)); +#202324 = CYLINDRICAL_SURFACE('',#202325,0.137255); +#202325 = AXIS2_PLACEMENT_3D('',#202326,#202327,#202328); +#202326 = CARTESIAN_POINT('',(148.5,-90.302943,0.)); +#202327 = DIRECTION('',(0.,0.,1.)); +#202328 = DIRECTION('',(1.,0.,-0.)); +#202329 = ADVANCED_FACE('',(#202330),#202357,.F.); +#202330 = FACE_BOUND('',#202331,.F.); +#202331 = EDGE_LOOP('',(#202332,#202342,#202349,#202350)); +#202332 = ORIENTED_EDGE('',*,*,#202333,.T.); +#202333 = EDGE_CURVE('',#202334,#202336,#202338,.T.); +#202334 = VERTEX_POINT('',#202335); +#202335 = CARTESIAN_POINT('',(145.137255,-77.,0.)); +#202336 = VERTEX_POINT('',#202337); +#202337 = CARTESIAN_POINT('',(145.137255,-77.,-3.5E-02)); +#202338 = LINE('',#202339,#202340); +#202339 = CARTESIAN_POINT('',(145.137255,-77.,0.)); +#202340 = VECTOR('',#202341,1.); +#202341 = DIRECTION('',(0.,0.,-1.)); +#202342 = ORIENTED_EDGE('',*,*,#202343,.T.); +#202343 = EDGE_CURVE('',#202336,#202336,#202344,.T.); +#202344 = CIRCLE('',#202345,0.137255); +#202345 = AXIS2_PLACEMENT_3D('',#202346,#202347,#202348); +#202346 = CARTESIAN_POINT('',(145.,-77.,-3.5E-02)); +#202347 = DIRECTION('',(0.,0.,1.)); +#202348 = DIRECTION('',(1.,0.,-0.)); +#202349 = ORIENTED_EDGE('',*,*,#202333,.F.); +#202350 = ORIENTED_EDGE('',*,*,#202351,.F.); +#202351 = EDGE_CURVE('',#202334,#202334,#202352,.T.); +#202352 = CIRCLE('',#202353,0.137255); +#202353 = AXIS2_PLACEMENT_3D('',#202354,#202355,#202356); +#202354 = CARTESIAN_POINT('',(145.,-77.,0.)); +#202355 = DIRECTION('',(0.,0.,1.)); +#202356 = DIRECTION('',(1.,0.,-0.)); +#202357 = CYLINDRICAL_SURFACE('',#202358,0.137255); +#202358 = AXIS2_PLACEMENT_3D('',#202359,#202360,#202361); +#202359 = CARTESIAN_POINT('',(145.,-77.,0.)); +#202360 = DIRECTION('',(0.,0.,1.)); +#202361 = DIRECTION('',(1.,0.,-0.)); +#202362 = ADVANCED_FACE('',(#202363,#202379,#202382),#202385,.F.); +#202363 = FACE_BOUND('',#202364,.F.); +#202364 = EDGE_LOOP('',(#202365,#202366,#202367,#202368,#202369,#202370, + #202371,#202372,#202373,#202374,#202375,#202376,#202377,#202378)); +#202365 = ORIENTED_EDGE('',*,*,#201888,.T.); +#202366 = ORIENTED_EDGE('',*,*,#201919,.T.); +#202367 = ORIENTED_EDGE('',*,*,#201950,.T.); +#202368 = ORIENTED_EDGE('',*,*,#201981,.T.); +#202369 = ORIENTED_EDGE('',*,*,#202012,.T.); +#202370 = ORIENTED_EDGE('',*,*,#202044,.T.); +#202371 = ORIENTED_EDGE('',*,*,#202076,.T.); +#202372 = ORIENTED_EDGE('',*,*,#202107,.T.); +#202373 = ORIENTED_EDGE('',*,*,#202138,.T.); +#202374 = ORIENTED_EDGE('',*,*,#202169,.T.); +#202375 = ORIENTED_EDGE('',*,*,#202200,.T.); +#202376 = ORIENTED_EDGE('',*,*,#202231,.T.); +#202377 = ORIENTED_EDGE('',*,*,#202263,.T.); +#202378 = ORIENTED_EDGE('',*,*,#202286,.T.); +#202379 = FACE_BOUND('',#202380,.F.); +#202380 = EDGE_LOOP('',(#202381)); +#202381 = ORIENTED_EDGE('',*,*,#202318,.T.); +#202382 = FACE_BOUND('',#202383,.F.); +#202383 = EDGE_LOOP('',(#202384)); +#202384 = ORIENTED_EDGE('',*,*,#202351,.T.); +#202385 = PLANE('',#202386); +#202386 = AXIS2_PLACEMENT_3D('',#202387,#202388,#202389); +#202387 = CARTESIAN_POINT('',(0.,0.,0.)); +#202388 = DIRECTION('',(-0.,-0.,-1.)); +#202389 = DIRECTION('',(-1.,0.,0.)); +#202390 = ADVANCED_FACE('',(#202391,#202407,#202410),#202413,.T.); +#202391 = FACE_BOUND('',#202392,.T.); +#202392 = EDGE_LOOP('',(#202393,#202394,#202395,#202396,#202397,#202398, + #202399,#202400,#202401,#202402,#202403,#202404,#202405,#202406)); +#202393 = ORIENTED_EDGE('',*,*,#201872,.T.); +#202394 = ORIENTED_EDGE('',*,*,#201903,.T.); +#202395 = ORIENTED_EDGE('',*,*,#201934,.T.); +#202396 = ORIENTED_EDGE('',*,*,#201965,.T.); +#202397 = ORIENTED_EDGE('',*,*,#201996,.T.); +#202398 = ORIENTED_EDGE('',*,*,#202027,.T.); +#202399 = ORIENTED_EDGE('',*,*,#202060,.T.); +#202400 = ORIENTED_EDGE('',*,*,#202091,.T.); +#202401 = ORIENTED_EDGE('',*,*,#202122,.T.); +#202402 = ORIENTED_EDGE('',*,*,#202153,.T.); +#202403 = ORIENTED_EDGE('',*,*,#202184,.T.); +#202404 = ORIENTED_EDGE('',*,*,#202215,.T.); +#202405 = ORIENTED_EDGE('',*,*,#202246,.T.); +#202406 = ORIENTED_EDGE('',*,*,#202279,.T.); +#202407 = FACE_BOUND('',#202408,.T.); +#202408 = EDGE_LOOP('',(#202409)); +#202409 = ORIENTED_EDGE('',*,*,#202310,.T.); +#202410 = FACE_BOUND('',#202411,.T.); +#202411 = EDGE_LOOP('',(#202412)); +#202412 = ORIENTED_EDGE('',*,*,#202343,.T.); +#202413 = PLANE('',#202414); +#202414 = AXIS2_PLACEMENT_3D('',#202415,#202416,#202417); +#202415 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#202416 = DIRECTION('',(-0.,-0.,-1.)); +#202417 = DIRECTION('',(-1.,0.,0.)); +#202418 = MANIFOLD_SOLID_BREP('',#202419); +#202419 = CLOSED_SHELL('',(#202420,#202462,#202493,#202524,#202555, + #202586,#202619,#202650,#202681,#202712,#202743,#202776,#202807, + #202838,#202869,#202902,#202933,#202955,#202988,#203016)); +#202420 = ADVANCED_FACE('',(#202421),#202457,.T.); +#202421 = FACE_BOUND('',#202422,.T.); +#202422 = EDGE_LOOP('',(#202423,#202433,#202442,#202450)); +#202423 = ORIENTED_EDGE('',*,*,#202424,.T.); +#202424 = EDGE_CURVE('',#202425,#202427,#202429,.T.); +#202425 = VERTEX_POINT('',#202426); +#202426 = CARTESIAN_POINT('',(122.630491,-99.398079,1.51)); +#202427 = VERTEX_POINT('',#202428); +#202428 = CARTESIAN_POINT('',(122.630491,-99.398079,1.545)); +#202429 = LINE('',#202430,#202431); +#202430 = CARTESIAN_POINT('',(122.630491,-99.398079,1.51)); +#202431 = VECTOR('',#202432,1.); +#202432 = DIRECTION('',(0.,0.,1.)); +#202433 = ORIENTED_EDGE('',*,*,#202434,.T.); +#202434 = EDGE_CURVE('',#202427,#202435,#202437,.T.); +#202435 = VERTEX_POINT('',#202436); +#202436 = CARTESIAN_POINT('',(122.630491,-99.201921,1.545)); +#202437 = CIRCLE('',#202438,0.100000456609); +#202438 = AXIS2_PLACEMENT_3D('',#202439,#202440,#202441); +#202439 = CARTESIAN_POINT('',(122.65,-99.3,1.545)); +#202440 = DIRECTION('',(0.,0.,-1.)); +#202441 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#202442 = ORIENTED_EDGE('',*,*,#202443,.F.); +#202443 = EDGE_CURVE('',#202444,#202435,#202446,.T.); +#202444 = VERTEX_POINT('',#202445); +#202445 = CARTESIAN_POINT('',(122.630491,-99.201921,1.51)); +#202446 = LINE('',#202447,#202448); +#202447 = CARTESIAN_POINT('',(122.630491,-99.201921,1.51)); +#202448 = VECTOR('',#202449,1.); +#202449 = DIRECTION('',(0.,0.,1.)); +#202450 = ORIENTED_EDGE('',*,*,#202451,.F.); +#202451 = EDGE_CURVE('',#202425,#202444,#202452,.T.); +#202452 = CIRCLE('',#202453,0.100000456609); +#202453 = AXIS2_PLACEMENT_3D('',#202454,#202455,#202456); +#202454 = CARTESIAN_POINT('',(122.65,-99.3,1.51)); +#202455 = DIRECTION('',(0.,0.,-1.)); +#202456 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#202457 = CYLINDRICAL_SURFACE('',#202458,0.100000456609); +#202458 = AXIS2_PLACEMENT_3D('',#202459,#202460,#202461); +#202459 = CARTESIAN_POINT('',(122.65,-99.3,1.51)); +#202460 = DIRECTION('',(0.,0.,-1.)); +#202461 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#202462 = ADVANCED_FACE('',(#202463),#202488,.T.); +#202463 = FACE_BOUND('',#202464,.T.); +#202464 = EDGE_LOOP('',(#202465,#202466,#202474,#202482)); +#202465 = ORIENTED_EDGE('',*,*,#202443,.T.); +#202466 = ORIENTED_EDGE('',*,*,#202467,.T.); +#202467 = EDGE_CURVE('',#202435,#202468,#202470,.T.); +#202468 = VERTEX_POINT('',#202469); +#202469 = CARTESIAN_POINT('',(124.319509,-99.201921,1.545)); +#202470 = LINE('',#202471,#202472); +#202471 = CARTESIAN_POINT('',(122.630491,-99.201921,1.545)); +#202472 = VECTOR('',#202473,1.); +#202473 = DIRECTION('',(1.,0.,0.)); +#202474 = ORIENTED_EDGE('',*,*,#202475,.F.); +#202475 = EDGE_CURVE('',#202476,#202468,#202478,.T.); +#202476 = VERTEX_POINT('',#202477); +#202477 = CARTESIAN_POINT('',(124.319509,-99.201921,1.51)); +#202478 = LINE('',#202479,#202480); +#202479 = CARTESIAN_POINT('',(124.319509,-99.201921,1.51)); +#202480 = VECTOR('',#202481,1.); +#202481 = DIRECTION('',(0.,0.,1.)); +#202482 = ORIENTED_EDGE('',*,*,#202483,.F.); +#202483 = EDGE_CURVE('',#202444,#202476,#202484,.T.); +#202484 = LINE('',#202485,#202486); +#202485 = CARTESIAN_POINT('',(122.630491,-99.201921,1.51)); +#202486 = VECTOR('',#202487,1.); +#202487 = DIRECTION('',(1.,0.,0.)); +#202488 = PLANE('',#202489); +#202489 = AXIS2_PLACEMENT_3D('',#202490,#202491,#202492); +#202490 = CARTESIAN_POINT('',(122.630491,-99.201921,1.51)); +#202491 = DIRECTION('',(0.,1.,0.)); +#202492 = DIRECTION('',(1.,0.,0.)); +#202493 = ADVANCED_FACE('',(#202494),#202519,.T.); +#202494 = FACE_BOUND('',#202495,.T.); +#202495 = EDGE_LOOP('',(#202496,#202497,#202505,#202513)); +#202496 = ORIENTED_EDGE('',*,*,#202475,.T.); +#202497 = ORIENTED_EDGE('',*,*,#202498,.T.); +#202498 = EDGE_CURVE('',#202468,#202499,#202501,.T.); +#202499 = VERTEX_POINT('',#202500); +#202500 = CARTESIAN_POINT('',(124.355557,-99.216853,1.545)); +#202501 = LINE('',#202502,#202503); +#202502 = CARTESIAN_POINT('',(124.319509,-99.201921,1.545)); +#202503 = VECTOR('',#202504,1.); +#202504 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#202505 = ORIENTED_EDGE('',*,*,#202506,.F.); +#202506 = EDGE_CURVE('',#202507,#202499,#202509,.T.); +#202507 = VERTEX_POINT('',#202508); +#202508 = CARTESIAN_POINT('',(124.355557,-99.216853,1.51)); +#202509 = LINE('',#202510,#202511); +#202510 = CARTESIAN_POINT('',(124.355557,-99.216853,1.51)); +#202511 = VECTOR('',#202512,1.); +#202512 = DIRECTION('',(0.,0.,1.)); +#202513 = ORIENTED_EDGE('',*,*,#202514,.F.); +#202514 = EDGE_CURVE('',#202476,#202507,#202515,.T.); +#202515 = LINE('',#202516,#202517); +#202516 = CARTESIAN_POINT('',(124.319509,-99.201921,1.51)); +#202517 = VECTOR('',#202518,1.); +#202518 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#202519 = PLANE('',#202520); +#202520 = AXIS2_PLACEMENT_3D('',#202521,#202522,#202523); +#202521 = CARTESIAN_POINT('',(124.319509,-99.201921,1.51)); +#202522 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#202523 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#202524 = ADVANCED_FACE('',(#202525),#202550,.T.); +#202525 = FACE_BOUND('',#202526,.T.); +#202526 = EDGE_LOOP('',(#202527,#202528,#202536,#202544)); +#202527 = ORIENTED_EDGE('',*,*,#202506,.T.); +#202528 = ORIENTED_EDGE('',*,*,#202529,.T.); +#202529 = EDGE_CURVE('',#202499,#202530,#202532,.T.); +#202530 = VERTEX_POINT('',#202531); +#202531 = CARTESIAN_POINT('',(125.27557,-100.134148,1.545)); +#202532 = LINE('',#202533,#202534); +#202533 = CARTESIAN_POINT('',(124.355557,-99.216853,1.545)); +#202534 = VECTOR('',#202535,1.); +#202535 = DIRECTION('',(0.70815205642,-0.706059958494,0.)); +#202536 = ORIENTED_EDGE('',*,*,#202537,.F.); +#202537 = EDGE_CURVE('',#202538,#202530,#202540,.T.); +#202538 = VERTEX_POINT('',#202539); +#202539 = CARTESIAN_POINT('',(125.27557,-100.134148,1.51)); +#202540 = LINE('',#202541,#202542); +#202541 = CARTESIAN_POINT('',(125.27557,-100.134148,1.51)); +#202542 = VECTOR('',#202543,1.); +#202543 = DIRECTION('',(0.,0.,1.)); +#202544 = ORIENTED_EDGE('',*,*,#202545,.F.); +#202545 = EDGE_CURVE('',#202507,#202538,#202546,.T.); +#202546 = LINE('',#202547,#202548); +#202547 = CARTESIAN_POINT('',(124.355557,-99.216853,1.51)); +#202548 = VECTOR('',#202549,1.); +#202549 = DIRECTION('',(0.70815205642,-0.706059958494,0.)); +#202550 = PLANE('',#202551); +#202551 = AXIS2_PLACEMENT_3D('',#202552,#202553,#202554); +#202552 = CARTESIAN_POINT('',(124.355557,-99.216853,1.51)); +#202553 = DIRECTION('',(0.706059958494,0.70815205642,-0.)); +#202554 = DIRECTION('',(0.70815205642,-0.706059958494,0.)); +#202555 = ADVANCED_FACE('',(#202556),#202581,.T.); +#202556 = FACE_BOUND('',#202557,.T.); +#202557 = EDGE_LOOP('',(#202558,#202559,#202567,#202575)); +#202558 = ORIENTED_EDGE('',*,*,#202537,.T.); +#202559 = ORIENTED_EDGE('',*,*,#202560,.T.); +#202560 = EDGE_CURVE('',#202530,#202561,#202563,.T.); +#202561 = VERTEX_POINT('',#202562); +#202562 = CARTESIAN_POINT('',(125.301654,-100.12716,1.545)); +#202563 = LINE('',#202564,#202565); +#202564 = CARTESIAN_POINT('',(125.27557,-100.134148,1.545)); +#202565 = VECTOR('',#202566,1.); +#202566 = DIRECTION('',(0.965936812148,0.258778041837,0.)); +#202567 = ORIENTED_EDGE('',*,*,#202568,.F.); +#202568 = EDGE_CURVE('',#202569,#202561,#202571,.T.); +#202569 = VERTEX_POINT('',#202570); +#202570 = CARTESIAN_POINT('',(125.301654,-100.12716,1.51)); +#202571 = LINE('',#202572,#202573); +#202572 = CARTESIAN_POINT('',(125.301654,-100.12716,1.51)); +#202573 = VECTOR('',#202574,1.); +#202574 = DIRECTION('',(0.,0.,1.)); +#202575 = ORIENTED_EDGE('',*,*,#202576,.F.); +#202576 = EDGE_CURVE('',#202538,#202569,#202577,.T.); +#202577 = LINE('',#202578,#202579); +#202578 = CARTESIAN_POINT('',(125.27557,-100.134148,1.51)); +#202579 = VECTOR('',#202580,1.); +#202580 = DIRECTION('',(0.965936812148,0.258778041837,0.)); +#202581 = PLANE('',#202582); +#202582 = AXIS2_PLACEMENT_3D('',#202583,#202584,#202585); +#202583 = CARTESIAN_POINT('',(125.27557,-100.134148,1.51)); +#202584 = DIRECTION('',(-0.258778041837,0.965936812148,0.)); +#202585 = DIRECTION('',(0.965936812148,0.258778041837,0.)); +#202586 = ADVANCED_FACE('',(#202587),#202614,.T.); +#202587 = FACE_BOUND('',#202588,.T.); +#202588 = EDGE_LOOP('',(#202589,#202590,#202599,#202607)); +#202589 = ORIENTED_EDGE('',*,*,#202568,.T.); +#202590 = ORIENTED_EDGE('',*,*,#202591,.T.); +#202591 = EDGE_CURVE('',#202561,#202592,#202594,.T.); +#202592 = VERTEX_POINT('',#202593); +#202593 = CARTESIAN_POINT('',(125.455617,-100.701757,1.545)); +#202594 = CIRCLE('',#202595,0.29999979361); +#202595 = AXIS2_PLACEMENT_3D('',#202596,#202597,#202598); +#202596 = CARTESIAN_POINT('',(125.3408124241,-100.4245931756,1.545)); +#202597 = DIRECTION('',(0.,0.,-1.)); +#202598 = DIRECTION('',(-0.130528170132,0.991444600975,-0.)); +#202599 = ORIENTED_EDGE('',*,*,#202600,.F.); +#202600 = EDGE_CURVE('',#202601,#202592,#202603,.T.); +#202601 = VERTEX_POINT('',#202602); +#202602 = CARTESIAN_POINT('',(125.455617,-100.701757,1.51)); +#202603 = LINE('',#202604,#202605); +#202604 = CARTESIAN_POINT('',(125.455617,-100.701757,1.51)); +#202605 = VECTOR('',#202606,1.); +#202606 = DIRECTION('',(0.,0.,1.)); +#202607 = ORIENTED_EDGE('',*,*,#202608,.F.); +#202608 = EDGE_CURVE('',#202569,#202601,#202609,.T.); +#202609 = CIRCLE('',#202610,0.29999979361); +#202610 = AXIS2_PLACEMENT_3D('',#202611,#202612,#202613); +#202611 = CARTESIAN_POINT('',(125.3408124241,-100.4245931756,1.51)); +#202612 = DIRECTION('',(0.,0.,-1.)); +#202613 = DIRECTION('',(-0.130528170132,0.991444600975,-0.)); +#202614 = CYLINDRICAL_SURFACE('',#202615,0.29999979361); +#202615 = AXIS2_PLACEMENT_3D('',#202616,#202617,#202618); +#202616 = CARTESIAN_POINT('',(125.3408124241,-100.4245931756,1.51)); +#202617 = DIRECTION('',(0.,0.,-1.)); +#202618 = DIRECTION('',(-0.130528170132,0.991444600975,-0.)); +#202619 = ADVANCED_FACE('',(#202620),#202645,.T.); +#202620 = FACE_BOUND('',#202621,.T.); +#202621 = EDGE_LOOP('',(#202622,#202623,#202631,#202639)); +#202622 = ORIENTED_EDGE('',*,*,#202600,.T.); +#202623 = ORIENTED_EDGE('',*,*,#202624,.T.); +#202624 = EDGE_CURVE('',#202592,#202625,#202627,.T.); +#202625 = VERTEX_POINT('',#202626); +#202626 = CARTESIAN_POINT('',(125.433826,-100.707595,1.545)); +#202627 = LINE('',#202628,#202629); +#202628 = CARTESIAN_POINT('',(125.455617,-100.701757,1.545)); +#202629 = VECTOR('',#202630,1.); +#202630 = DIRECTION('',(-0.965935587047,-0.258782614711,0.)); +#202631 = ORIENTED_EDGE('',*,*,#202632,.F.); +#202632 = EDGE_CURVE('',#202633,#202625,#202635,.T.); +#202633 = VERTEX_POINT('',#202634); +#202634 = CARTESIAN_POINT('',(125.433826,-100.707595,1.51)); +#202635 = LINE('',#202636,#202637); +#202636 = CARTESIAN_POINT('',(125.433826,-100.707595,1.51)); +#202637 = VECTOR('',#202638,1.); +#202638 = DIRECTION('',(0.,0.,1.)); +#202639 = ORIENTED_EDGE('',*,*,#202640,.F.); +#202640 = EDGE_CURVE('',#202601,#202633,#202641,.T.); +#202641 = LINE('',#202642,#202643); +#202642 = CARTESIAN_POINT('',(125.455617,-100.701757,1.51)); +#202643 = VECTOR('',#202644,1.); +#202644 = DIRECTION('',(-0.965935587047,-0.258782614711,0.)); +#202645 = PLANE('',#202646); +#202646 = AXIS2_PLACEMENT_3D('',#202647,#202648,#202649); +#202647 = CARTESIAN_POINT('',(125.455617,-100.701757,1.51)); +#202648 = DIRECTION('',(0.258782614711,-0.965935587047,0.)); +#202649 = DIRECTION('',(-0.965935587047,-0.258782614711,0.)); +#202650 = ADVANCED_FACE('',(#202651),#202676,.T.); +#202651 = FACE_BOUND('',#202652,.T.); +#202652 = EDGE_LOOP('',(#202653,#202654,#202662,#202670)); +#202653 = ORIENTED_EDGE('',*,*,#202632,.T.); +#202654 = ORIENTED_EDGE('',*,*,#202655,.T.); +#202655 = EDGE_CURVE('',#202625,#202656,#202658,.T.); +#202656 = VERTEX_POINT('',#202657); +#202657 = CARTESIAN_POINT('',(124.305557,-101.833147,1.545)); +#202658 = LINE('',#202659,#202660); +#202659 = CARTESIAN_POINT('',(125.433826,-100.707595,1.545)); +#202660 = VECTOR('',#202661,1.); +#202661 = DIRECTION('',(-0.707958689884,-0.706253844887,0.)); +#202662 = ORIENTED_EDGE('',*,*,#202663,.F.); +#202663 = EDGE_CURVE('',#202664,#202656,#202666,.T.); +#202664 = VERTEX_POINT('',#202665); +#202665 = CARTESIAN_POINT('',(124.305557,-101.833147,1.51)); +#202666 = LINE('',#202667,#202668); +#202667 = CARTESIAN_POINT('',(124.305557,-101.833147,1.51)); +#202668 = VECTOR('',#202669,1.); +#202669 = DIRECTION('',(0.,0.,1.)); +#202670 = ORIENTED_EDGE('',*,*,#202671,.F.); +#202671 = EDGE_CURVE('',#202633,#202664,#202672,.T.); +#202672 = LINE('',#202673,#202674); +#202673 = CARTESIAN_POINT('',(125.433826,-100.707595,1.51)); +#202674 = VECTOR('',#202675,1.); +#202675 = DIRECTION('',(-0.707958689884,-0.706253844887,0.)); +#202676 = PLANE('',#202677); +#202677 = AXIS2_PLACEMENT_3D('',#202678,#202679,#202680); +#202678 = CARTESIAN_POINT('',(125.433826,-100.707595,1.51)); +#202679 = DIRECTION('',(0.706253844887,-0.707958689884,0.)); +#202680 = DIRECTION('',(-0.707958689884,-0.706253844887,0.)); +#202681 = ADVANCED_FACE('',(#202682),#202707,.T.); +#202682 = FACE_BOUND('',#202683,.T.); +#202683 = EDGE_LOOP('',(#202684,#202685,#202693,#202701)); +#202684 = ORIENTED_EDGE('',*,*,#202663,.T.); +#202685 = ORIENTED_EDGE('',*,*,#202686,.T.); +#202686 = EDGE_CURVE('',#202656,#202687,#202689,.T.); +#202687 = VERTEX_POINT('',#202688); +#202688 = CARTESIAN_POINT('',(124.269509,-101.848079,1.545)); +#202689 = LINE('',#202690,#202691); +#202690 = CARTESIAN_POINT('',(124.305557,-101.833147,1.545)); +#202691 = VECTOR('',#202692,1.); +#202692 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#202693 = ORIENTED_EDGE('',*,*,#202694,.F.); +#202694 = EDGE_CURVE('',#202695,#202687,#202697,.T.); +#202695 = VERTEX_POINT('',#202696); +#202696 = CARTESIAN_POINT('',(124.269509,-101.848079,1.51)); +#202697 = LINE('',#202698,#202699); +#202698 = CARTESIAN_POINT('',(124.269509,-101.848079,1.51)); +#202699 = VECTOR('',#202700,1.); +#202700 = DIRECTION('',(0.,0.,1.)); +#202701 = ORIENTED_EDGE('',*,*,#202702,.F.); +#202702 = EDGE_CURVE('',#202664,#202695,#202703,.T.); +#202703 = LINE('',#202704,#202705); +#202704 = CARTESIAN_POINT('',(124.305557,-101.833147,1.51)); +#202705 = VECTOR('',#202706,1.); +#202706 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#202707 = PLANE('',#202708); +#202708 = AXIS2_PLACEMENT_3D('',#202709,#202710,#202711); +#202709 = CARTESIAN_POINT('',(124.305557,-101.833147,1.51)); +#202710 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#202711 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#202712 = ADVANCED_FACE('',(#202713),#202738,.T.); +#202713 = FACE_BOUND('',#202714,.T.); +#202714 = EDGE_LOOP('',(#202715,#202716,#202724,#202732)); +#202715 = ORIENTED_EDGE('',*,*,#202694,.T.); +#202716 = ORIENTED_EDGE('',*,*,#202717,.T.); +#202717 = EDGE_CURVE('',#202687,#202718,#202720,.T.); +#202718 = VERTEX_POINT('',#202719); +#202719 = CARTESIAN_POINT('',(122.630491,-101.848079,1.545)); +#202720 = LINE('',#202721,#202722); +#202721 = CARTESIAN_POINT('',(124.269509,-101.848079,1.545)); +#202722 = VECTOR('',#202723,1.); +#202723 = DIRECTION('',(-1.,0.,0.)); +#202724 = ORIENTED_EDGE('',*,*,#202725,.F.); +#202725 = EDGE_CURVE('',#202726,#202718,#202728,.T.); +#202726 = VERTEX_POINT('',#202727); +#202727 = CARTESIAN_POINT('',(122.630491,-101.848079,1.51)); +#202728 = LINE('',#202729,#202730); +#202729 = CARTESIAN_POINT('',(122.630491,-101.848079,1.51)); +#202730 = VECTOR('',#202731,1.); +#202731 = DIRECTION('',(0.,0.,1.)); +#202732 = ORIENTED_EDGE('',*,*,#202733,.F.); +#202733 = EDGE_CURVE('',#202695,#202726,#202734,.T.); +#202734 = LINE('',#202735,#202736); +#202735 = CARTESIAN_POINT('',(124.269509,-101.848079,1.51)); +#202736 = VECTOR('',#202737,1.); +#202737 = DIRECTION('',(-1.,0.,0.)); +#202738 = PLANE('',#202739); +#202739 = AXIS2_PLACEMENT_3D('',#202740,#202741,#202742); +#202740 = CARTESIAN_POINT('',(124.269509,-101.848079,1.51)); +#202741 = DIRECTION('',(0.,-1.,0.)); +#202742 = DIRECTION('',(-1.,0.,0.)); +#202743 = ADVANCED_FACE('',(#202744),#202771,.T.); +#202744 = FACE_BOUND('',#202745,.T.); +#202745 = EDGE_LOOP('',(#202746,#202747,#202756,#202764)); +#202746 = ORIENTED_EDGE('',*,*,#202725,.T.); +#202747 = ORIENTED_EDGE('',*,*,#202748,.T.); +#202748 = EDGE_CURVE('',#202718,#202749,#202751,.T.); +#202749 = VERTEX_POINT('',#202750); +#202750 = CARTESIAN_POINT('',(122.630491,-101.651921,1.545)); +#202751 = CIRCLE('',#202752,0.100000456609); +#202752 = AXIS2_PLACEMENT_3D('',#202753,#202754,#202755); +#202753 = CARTESIAN_POINT('',(122.65,-101.75,1.545)); +#202754 = DIRECTION('',(0.,0.,-1.)); +#202755 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#202756 = ORIENTED_EDGE('',*,*,#202757,.F.); +#202757 = EDGE_CURVE('',#202758,#202749,#202760,.T.); +#202758 = VERTEX_POINT('',#202759); +#202759 = CARTESIAN_POINT('',(122.630491,-101.651921,1.51)); +#202760 = LINE('',#202761,#202762); +#202761 = CARTESIAN_POINT('',(122.630491,-101.651921,1.51)); +#202762 = VECTOR('',#202763,1.); +#202763 = DIRECTION('',(0.,0.,1.)); +#202764 = ORIENTED_EDGE('',*,*,#202765,.F.); +#202765 = EDGE_CURVE('',#202726,#202758,#202766,.T.); +#202766 = CIRCLE('',#202767,0.100000456609); +#202767 = AXIS2_PLACEMENT_3D('',#202768,#202769,#202770); +#202768 = CARTESIAN_POINT('',(122.65,-101.75,1.51)); +#202769 = DIRECTION('',(0.,0.,-1.)); +#202770 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#202771 = CYLINDRICAL_SURFACE('',#202772,0.100000456609); +#202772 = AXIS2_PLACEMENT_3D('',#202773,#202774,#202775); +#202773 = CARTESIAN_POINT('',(122.65,-101.75,1.51)); +#202774 = DIRECTION('',(0.,0.,-1.)); +#202775 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#202776 = ADVANCED_FACE('',(#202777),#202802,.T.); +#202777 = FACE_BOUND('',#202778,.T.); +#202778 = EDGE_LOOP('',(#202779,#202780,#202788,#202796)); +#202779 = ORIENTED_EDGE('',*,*,#202757,.T.); +#202780 = ORIENTED_EDGE('',*,*,#202781,.T.); +#202781 = EDGE_CURVE('',#202749,#202782,#202784,.T.); +#202782 = VERTEX_POINT('',#202783); +#202783 = CARTESIAN_POINT('',(124.208578,-101.65,1.545)); +#202784 = LINE('',#202785,#202786); +#202785 = CARTESIAN_POINT('',(122.630491,-101.651921,1.545)); +#202786 = VECTOR('',#202787,1.); +#202787 = DIRECTION('',(0.999999259095,1.217295736368E-03,0.)); +#202788 = ORIENTED_EDGE('',*,*,#202789,.F.); +#202789 = EDGE_CURVE('',#202790,#202782,#202792,.T.); +#202790 = VERTEX_POINT('',#202791); +#202791 = CARTESIAN_POINT('',(124.208578,-101.65,1.51)); +#202792 = LINE('',#202793,#202794); +#202793 = CARTESIAN_POINT('',(124.208578,-101.65,1.51)); +#202794 = VECTOR('',#202795,1.); +#202795 = DIRECTION('',(0.,0.,1.)); +#202796 = ORIENTED_EDGE('',*,*,#202797,.F.); +#202797 = EDGE_CURVE('',#202758,#202790,#202798,.T.); +#202798 = LINE('',#202799,#202800); +#202799 = CARTESIAN_POINT('',(122.630491,-101.651921,1.51)); +#202800 = VECTOR('',#202801,1.); +#202801 = DIRECTION('',(0.999999259095,1.217295736368E-03,0.)); +#202802 = PLANE('',#202803); +#202803 = AXIS2_PLACEMENT_3D('',#202804,#202805,#202806); +#202804 = CARTESIAN_POINT('',(122.630491,-101.651921,1.51)); +#202805 = DIRECTION('',(-1.217295736368E-03,0.999999259095,0.)); +#202806 = DIRECTION('',(0.999999259095,1.217295736368E-03,0.)); +#202807 = ADVANCED_FACE('',(#202808),#202833,.T.); +#202808 = FACE_BOUND('',#202809,.T.); +#202809 = EDGE_LOOP('',(#202810,#202811,#202819,#202827)); +#202810 = ORIENTED_EDGE('',*,*,#202789,.T.); +#202811 = ORIENTED_EDGE('',*,*,#202812,.T.); +#202812 = EDGE_CURVE('',#202782,#202813,#202815,.T.); +#202813 = VERTEX_POINT('',#202814); +#202814 = CARTESIAN_POINT('',(125.182144,-100.676433,1.545)); +#202815 = LINE('',#202816,#202817); +#202816 = CARTESIAN_POINT('',(124.208578,-101.65,1.545)); +#202817 = VECTOR('',#202818,1.); +#202818 = DIRECTION('',(0.707106418034,0.707107144339,0.)); +#202819 = ORIENTED_EDGE('',*,*,#202820,.F.); +#202820 = EDGE_CURVE('',#202821,#202813,#202823,.T.); +#202821 = VERTEX_POINT('',#202822); +#202822 = CARTESIAN_POINT('',(125.182144,-100.676433,1.51)); +#202823 = LINE('',#202824,#202825); +#202824 = CARTESIAN_POINT('',(125.182144,-100.676433,1.51)); +#202825 = VECTOR('',#202826,1.); +#202826 = DIRECTION('',(0.,0.,1.)); +#202827 = ORIENTED_EDGE('',*,*,#202828,.F.); +#202828 = EDGE_CURVE('',#202790,#202821,#202829,.T.); +#202829 = LINE('',#202830,#202831); +#202830 = CARTESIAN_POINT('',(124.208578,-101.65,1.51)); +#202831 = VECTOR('',#202832,1.); +#202832 = DIRECTION('',(0.707106418034,0.707107144339,0.)); +#202833 = PLANE('',#202834); +#202834 = AXIS2_PLACEMENT_3D('',#202835,#202836,#202837); +#202835 = CARTESIAN_POINT('',(124.208578,-101.65,1.51)); +#202836 = DIRECTION('',(-0.707107144339,0.707106418034,0.)); +#202837 = DIRECTION('',(0.707106418034,0.707107144339,0.)); +#202838 = ADVANCED_FACE('',(#202839),#202864,.T.); +#202839 = FACE_BOUND('',#202840,.T.); +#202840 = EDGE_LOOP('',(#202841,#202842,#202850,#202858)); +#202841 = ORIENTED_EDGE('',*,*,#202820,.T.); +#202842 = ORIENTED_EDGE('',*,*,#202843,.T.); +#202843 = EDGE_CURVE('',#202813,#202844,#202846,.T.); +#202844 = VERTEX_POINT('',#202845); +#202845 = CARTESIAN_POINT('',(125.158184,-100.662599,1.545)); +#202846 = LINE('',#202847,#202848); +#202847 = CARTESIAN_POINT('',(125.182144,-100.676433,1.545)); +#202848 = VECTOR('',#202849,1.); +#202849 = DIRECTION('',(-0.86601464281,0.50001863809,0.)); +#202850 = ORIENTED_EDGE('',*,*,#202851,.F.); +#202851 = EDGE_CURVE('',#202852,#202844,#202854,.T.); +#202852 = VERTEX_POINT('',#202853); +#202853 = CARTESIAN_POINT('',(125.158184,-100.662599,1.51)); +#202854 = LINE('',#202855,#202856); +#202855 = CARTESIAN_POINT('',(125.158184,-100.662599,1.51)); +#202856 = VECTOR('',#202857,1.); +#202857 = DIRECTION('',(0.,0.,1.)); +#202858 = ORIENTED_EDGE('',*,*,#202859,.F.); +#202859 = EDGE_CURVE('',#202821,#202852,#202860,.T.); +#202860 = LINE('',#202861,#202862); +#202861 = CARTESIAN_POINT('',(125.182144,-100.676433,1.51)); +#202862 = VECTOR('',#202863,1.); +#202863 = DIRECTION('',(-0.86601464281,0.50001863809,0.)); +#202864 = PLANE('',#202865); +#202865 = AXIS2_PLACEMENT_3D('',#202866,#202867,#202868); +#202866 = CARTESIAN_POINT('',(125.182144,-100.676433,1.51)); +#202867 = DIRECTION('',(-0.50001863809,-0.86601464281,0.)); +#202868 = DIRECTION('',(-0.86601464281,0.50001863809,0.)); +#202869 = ADVANCED_FACE('',(#202870),#202897,.T.); +#202870 = FACE_BOUND('',#202871,.T.); +#202871 = EDGE_LOOP('',(#202872,#202873,#202882,#202890)); +#202872 = ORIENTED_EDGE('',*,*,#202851,.T.); +#202873 = ORIENTED_EDGE('',*,*,#202874,.T.); +#202874 = EDGE_CURVE('',#202844,#202875,#202877,.T.); +#202875 = VERTEX_POINT('',#202876); +#202876 = CARTESIAN_POINT('',(125.101977,-100.243399,1.545)); +#202877 = CIRCLE('',#202878,0.299637302205); +#202878 = AXIS2_PLACEMENT_3D('',#202879,#202880,#202881); +#202879 = CARTESIAN_POINT('',(125.34047242001,-100.4247893181,1.545)); +#202880 = DIRECTION('',(0.,0.,-1.)); +#202881 = DIRECTION('',(-0.608363573811,-0.793658466886,-0.)); +#202882 = ORIENTED_EDGE('',*,*,#202883,.F.); +#202883 = EDGE_CURVE('',#202884,#202875,#202886,.T.); +#202884 = VERTEX_POINT('',#202885); +#202885 = CARTESIAN_POINT('',(125.101977,-100.243399,1.51)); +#202886 = LINE('',#202887,#202888); +#202887 = CARTESIAN_POINT('',(125.101977,-100.243399,1.51)); +#202888 = VECTOR('',#202889,1.); +#202889 = DIRECTION('',(0.,0.,1.)); +#202890 = ORIENTED_EDGE('',*,*,#202891,.F.); +#202891 = EDGE_CURVE('',#202852,#202884,#202892,.T.); +#202892 = CIRCLE('',#202893,0.299637302205); +#202893 = AXIS2_PLACEMENT_3D('',#202894,#202895,#202896); +#202894 = CARTESIAN_POINT('',(125.34047242001,-100.4247893181,1.51)); +#202895 = DIRECTION('',(0.,0.,-1.)); +#202896 = DIRECTION('',(-0.608363573811,-0.793658466886,-0.)); +#202897 = CYLINDRICAL_SURFACE('',#202898,0.299637302205); +#202898 = AXIS2_PLACEMENT_3D('',#202899,#202900,#202901); +#202899 = CARTESIAN_POINT('',(125.34047242001,-100.4247893181,1.51)); +#202900 = DIRECTION('',(0.,0.,-1.)); +#202901 = DIRECTION('',(-0.608363573811,-0.793658466886,-0.)); +#202902 = ADVANCED_FACE('',(#202903),#202928,.T.); +#202903 = FACE_BOUND('',#202904,.T.); +#202904 = EDGE_LOOP('',(#202905,#202906,#202914,#202922)); +#202905 = ORIENTED_EDGE('',*,*,#202883,.T.); +#202906 = ORIENTED_EDGE('',*,*,#202907,.T.); +#202907 = EDGE_CURVE('',#202875,#202908,#202910,.T.); +#202908 = VERTEX_POINT('',#202909); +#202909 = CARTESIAN_POINT('',(124.258578,-99.4,1.545)); +#202910 = LINE('',#202911,#202912); +#202911 = CARTESIAN_POINT('',(125.101977,-100.243399,1.545)); +#202912 = VECTOR('',#202913,1.); +#202913 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202914 = ORIENTED_EDGE('',*,*,#202915,.F.); +#202915 = EDGE_CURVE('',#202916,#202908,#202918,.T.); +#202916 = VERTEX_POINT('',#202917); +#202917 = CARTESIAN_POINT('',(124.258578,-99.4,1.51)); +#202918 = LINE('',#202919,#202920); +#202919 = CARTESIAN_POINT('',(124.258578,-99.4,1.51)); +#202920 = VECTOR('',#202921,1.); +#202921 = DIRECTION('',(0.,0.,1.)); +#202922 = ORIENTED_EDGE('',*,*,#202923,.F.); +#202923 = EDGE_CURVE('',#202884,#202916,#202924,.T.); +#202924 = LINE('',#202925,#202926); +#202925 = CARTESIAN_POINT('',(125.101977,-100.243399,1.51)); +#202926 = VECTOR('',#202927,1.); +#202927 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202928 = PLANE('',#202929); +#202929 = AXIS2_PLACEMENT_3D('',#202930,#202931,#202932); +#202930 = CARTESIAN_POINT('',(125.101977,-100.243399,1.51)); +#202931 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#202932 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#202933 = ADVANCED_FACE('',(#202934),#202950,.T.); +#202934 = FACE_BOUND('',#202935,.T.); +#202935 = EDGE_LOOP('',(#202936,#202937,#202943,#202944)); +#202936 = ORIENTED_EDGE('',*,*,#202915,.T.); +#202937 = ORIENTED_EDGE('',*,*,#202938,.T.); +#202938 = EDGE_CURVE('',#202908,#202427,#202939,.T.); +#202939 = LINE('',#202940,#202941); +#202940 = CARTESIAN_POINT('',(124.258578,-99.4,1.545)); +#202941 = VECTOR('',#202942,1.); +#202942 = DIRECTION('',(-0.999999303904,1.179911554364E-03,0.)); +#202943 = ORIENTED_EDGE('',*,*,#202424,.F.); +#202944 = ORIENTED_EDGE('',*,*,#202945,.F.); +#202945 = EDGE_CURVE('',#202916,#202425,#202946,.T.); +#202946 = LINE('',#202947,#202948); +#202947 = CARTESIAN_POINT('',(124.258578,-99.4,1.51)); +#202948 = VECTOR('',#202949,1.); +#202949 = DIRECTION('',(-0.999999303904,1.179911554364E-03,0.)); +#202950 = PLANE('',#202951); +#202951 = AXIS2_PLACEMENT_3D('',#202952,#202953,#202954); +#202952 = CARTESIAN_POINT('',(124.258578,-99.4,1.51)); +#202953 = DIRECTION('',(-1.179911554364E-03,-0.999999303904,0.)); +#202954 = DIRECTION('',(-0.999999303904,1.179911554364E-03,0.)); +#202955 = ADVANCED_FACE('',(#202956),#202983,.F.); +#202956 = FACE_BOUND('',#202957,.T.); +#202957 = EDGE_LOOP('',(#202958,#202968,#202975,#202976)); +#202958 = ORIENTED_EDGE('',*,*,#202959,.T.); +#202959 = EDGE_CURVE('',#202960,#202962,#202964,.T.); +#202960 = VERTEX_POINT('',#202961); +#202961 = CARTESIAN_POINT('',(125.478067,-100.424593,1.51)); +#202962 = VERTEX_POINT('',#202963); +#202963 = CARTESIAN_POINT('',(125.478067,-100.424593,1.545)); +#202964 = LINE('',#202965,#202966); +#202965 = CARTESIAN_POINT('',(125.478067,-100.424593,1.51)); +#202966 = VECTOR('',#202967,1.); +#202967 = DIRECTION('',(0.,0.,1.)); +#202968 = ORIENTED_EDGE('',*,*,#202969,.T.); +#202969 = EDGE_CURVE('',#202962,#202962,#202970,.T.); +#202970 = CIRCLE('',#202971,0.137255); +#202971 = AXIS2_PLACEMENT_3D('',#202972,#202973,#202974); +#202972 = CARTESIAN_POINT('',(125.340812,-100.424593,1.545)); +#202973 = DIRECTION('',(0.,0.,1.)); +#202974 = DIRECTION('',(1.,0.,-0.)); +#202975 = ORIENTED_EDGE('',*,*,#202959,.F.); +#202976 = ORIENTED_EDGE('',*,*,#202977,.F.); +#202977 = EDGE_CURVE('',#202960,#202960,#202978,.T.); +#202978 = CIRCLE('',#202979,0.137255); +#202979 = AXIS2_PLACEMENT_3D('',#202980,#202981,#202982); +#202980 = CARTESIAN_POINT('',(125.340812,-100.424593,1.51)); +#202981 = DIRECTION('',(0.,0.,1.)); +#202982 = DIRECTION('',(1.,0.,-0.)); +#202983 = CYLINDRICAL_SURFACE('',#202984,0.137255); +#202984 = AXIS2_PLACEMENT_3D('',#202985,#202986,#202987); +#202985 = CARTESIAN_POINT('',(125.340812,-100.424593,1.51)); +#202986 = DIRECTION('',(-0.,-0.,-1.)); +#202987 = DIRECTION('',(1.,0.,-0.)); +#202988 = ADVANCED_FACE('',(#202989,#203008),#203011,.F.); +#202989 = FACE_BOUND('',#202990,.T.); +#202990 = EDGE_LOOP('',(#202991,#202992,#202993,#202994,#202995,#202996, + #202997,#202998,#202999,#203000,#203001,#203002,#203003,#203004, + #203005,#203006,#203007)); +#202991 = ORIENTED_EDGE('',*,*,#202451,.T.); +#202992 = ORIENTED_EDGE('',*,*,#202483,.T.); +#202993 = ORIENTED_EDGE('',*,*,#202514,.T.); +#202994 = ORIENTED_EDGE('',*,*,#202545,.T.); +#202995 = ORIENTED_EDGE('',*,*,#202576,.T.); +#202996 = ORIENTED_EDGE('',*,*,#202608,.T.); +#202997 = ORIENTED_EDGE('',*,*,#202640,.T.); +#202998 = ORIENTED_EDGE('',*,*,#202671,.T.); +#202999 = ORIENTED_EDGE('',*,*,#202702,.T.); +#203000 = ORIENTED_EDGE('',*,*,#202733,.T.); +#203001 = ORIENTED_EDGE('',*,*,#202765,.T.); +#203002 = ORIENTED_EDGE('',*,*,#202797,.T.); +#203003 = ORIENTED_EDGE('',*,*,#202828,.T.); +#203004 = ORIENTED_EDGE('',*,*,#202859,.T.); +#203005 = ORIENTED_EDGE('',*,*,#202891,.T.); +#203006 = ORIENTED_EDGE('',*,*,#202923,.T.); +#203007 = ORIENTED_EDGE('',*,*,#202945,.T.); +#203008 = FACE_BOUND('',#203009,.T.); +#203009 = EDGE_LOOP('',(#203010)); +#203010 = ORIENTED_EDGE('',*,*,#202977,.T.); +#203011 = PLANE('',#203012); +#203012 = AXIS2_PLACEMENT_3D('',#203013,#203014,#203015); +#203013 = CARTESIAN_POINT('',(0.,0.,1.51)); +#203014 = DIRECTION('',(0.,0.,1.)); +#203015 = DIRECTION('',(1.,0.,-0.)); +#203016 = ADVANCED_FACE('',(#203017,#203036),#203039,.T.); +#203017 = FACE_BOUND('',#203018,.F.); +#203018 = EDGE_LOOP('',(#203019,#203020,#203021,#203022,#203023,#203024, + #203025,#203026,#203027,#203028,#203029,#203030,#203031,#203032, + #203033,#203034,#203035)); +#203019 = ORIENTED_EDGE('',*,*,#202434,.T.); +#203020 = ORIENTED_EDGE('',*,*,#202467,.T.); +#203021 = ORIENTED_EDGE('',*,*,#202498,.T.); +#203022 = ORIENTED_EDGE('',*,*,#202529,.T.); +#203023 = ORIENTED_EDGE('',*,*,#202560,.T.); +#203024 = ORIENTED_EDGE('',*,*,#202591,.T.); +#203025 = ORIENTED_EDGE('',*,*,#202624,.T.); +#203026 = ORIENTED_EDGE('',*,*,#202655,.T.); +#203027 = ORIENTED_EDGE('',*,*,#202686,.T.); +#203028 = ORIENTED_EDGE('',*,*,#202717,.T.); +#203029 = ORIENTED_EDGE('',*,*,#202748,.T.); +#203030 = ORIENTED_EDGE('',*,*,#202781,.T.); +#203031 = ORIENTED_EDGE('',*,*,#202812,.T.); +#203032 = ORIENTED_EDGE('',*,*,#202843,.T.); +#203033 = ORIENTED_EDGE('',*,*,#202874,.T.); +#203034 = ORIENTED_EDGE('',*,*,#202907,.T.); +#203035 = ORIENTED_EDGE('',*,*,#202938,.T.); +#203036 = FACE_BOUND('',#203037,.F.); +#203037 = EDGE_LOOP('',(#203038)); +#203038 = ORIENTED_EDGE('',*,*,#202969,.T.); +#203039 = PLANE('',#203040); +#203040 = AXIS2_PLACEMENT_3D('',#203041,#203042,#203043); +#203041 = CARTESIAN_POINT('',(0.,0.,1.545)); +#203042 = DIRECTION('',(0.,0.,1.)); +#203043 = DIRECTION('',(1.,0.,-0.)); +#203044 = MANIFOLD_SOLID_BREP('',#203045); +#203045 = CLOSED_SHELL('',(#203046,#203086,#203117,#203148,#203181, + #203212,#203243,#203274,#203307,#203338,#203360,#203393,#203414)); +#203046 = ADVANCED_FACE('',(#203047),#203081,.T.); +#203047 = FACE_BOUND('',#203048,.T.); +#203048 = EDGE_LOOP('',(#203049,#203059,#203067,#203075)); +#203049 = ORIENTED_EDGE('',*,*,#203050,.T.); +#203050 = EDGE_CURVE('',#203051,#203053,#203055,.T.); +#203051 = VERTEX_POINT('',#203052); +#203052 = CARTESIAN_POINT('',(128.364443,-75.996853,1.51)); +#203053 = VERTEX_POINT('',#203054); +#203054 = CARTESIAN_POINT('',(128.364443,-75.996853,1.545)); +#203055 = LINE('',#203056,#203057); +#203056 = CARTESIAN_POINT('',(128.364443,-75.996853,1.51)); +#203057 = VECTOR('',#203058,1.); +#203058 = DIRECTION('',(0.,0.,1.)); +#203059 = ORIENTED_EDGE('',*,*,#203060,.T.); +#203060 = EDGE_CURVE('',#203053,#203061,#203063,.T.); +#203061 = VERTEX_POINT('',#203062); +#203062 = CARTESIAN_POINT('',(128.400491,-75.981921,1.545)); +#203063 = LINE('',#203064,#203065); +#203064 = CARTESIAN_POINT('',(128.364443,-75.996853,1.545)); +#203065 = VECTOR('',#203066,1.); +#203066 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#203067 = ORIENTED_EDGE('',*,*,#203068,.F.); +#203068 = EDGE_CURVE('',#203069,#203061,#203071,.T.); +#203069 = VERTEX_POINT('',#203070); +#203070 = CARTESIAN_POINT('',(128.400491,-75.981921,1.51)); +#203071 = LINE('',#203072,#203073); +#203072 = CARTESIAN_POINT('',(128.400491,-75.981921,1.51)); +#203073 = VECTOR('',#203074,1.); +#203074 = DIRECTION('',(0.,0.,1.)); +#203075 = ORIENTED_EDGE('',*,*,#203076,.F.); +#203076 = EDGE_CURVE('',#203051,#203069,#203077,.T.); +#203077 = LINE('',#203078,#203079); +#203078 = CARTESIAN_POINT('',(128.364443,-75.996853,1.51)); +#203079 = VECTOR('',#203080,1.); +#203080 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#203081 = PLANE('',#203082); +#203082 = AXIS2_PLACEMENT_3D('',#203083,#203084,#203085); +#203083 = CARTESIAN_POINT('',(128.364443,-75.996853,1.51)); +#203084 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#203085 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#203086 = ADVANCED_FACE('',(#203087),#203112,.T.); +#203087 = FACE_BOUND('',#203088,.T.); +#203088 = EDGE_LOOP('',(#203089,#203090,#203098,#203106)); +#203089 = ORIENTED_EDGE('',*,*,#203068,.T.); +#203090 = ORIENTED_EDGE('',*,*,#203091,.T.); +#203091 = EDGE_CURVE('',#203061,#203092,#203094,.T.); +#203092 = VERTEX_POINT('',#203093); +#203093 = CARTESIAN_POINT('',(129.25,-75.98,1.545)); +#203094 = LINE('',#203095,#203096); +#203095 = CARTESIAN_POINT('',(128.400491,-75.981921,1.545)); +#203096 = VECTOR('',#203097,1.); +#203097 = DIRECTION('',(0.999997443257,2.261300455313E-03,0.)); +#203098 = ORIENTED_EDGE('',*,*,#203099,.F.); +#203099 = EDGE_CURVE('',#203100,#203092,#203102,.T.); +#203100 = VERTEX_POINT('',#203101); +#203101 = CARTESIAN_POINT('',(129.25,-75.98,1.51)); +#203102 = LINE('',#203103,#203104); +#203103 = CARTESIAN_POINT('',(129.25,-75.98,1.51)); +#203104 = VECTOR('',#203105,1.); +#203105 = DIRECTION('',(0.,0.,1.)); +#203106 = ORIENTED_EDGE('',*,*,#203107,.F.); +#203107 = EDGE_CURVE('',#203069,#203100,#203108,.T.); +#203108 = LINE('',#203109,#203110); +#203109 = CARTESIAN_POINT('',(128.400491,-75.981921,1.51)); +#203110 = VECTOR('',#203111,1.); +#203111 = DIRECTION('',(0.999997443257,2.261300455313E-03,0.)); +#203112 = PLANE('',#203113); +#203113 = AXIS2_PLACEMENT_3D('',#203114,#203115,#203116); +#203114 = CARTESIAN_POINT('',(128.400491,-75.981921,1.51)); +#203115 = DIRECTION('',(-2.261300455313E-03,0.999997443257,0.)); +#203116 = DIRECTION('',(0.999997443257,2.261300455313E-03,0.)); +#203117 = ADVANCED_FACE('',(#203118),#203143,.T.); +#203118 = FACE_BOUND('',#203119,.T.); +#203119 = EDGE_LOOP('',(#203120,#203121,#203129,#203137)); +#203120 = ORIENTED_EDGE('',*,*,#203099,.T.); +#203121 = ORIENTED_EDGE('',*,*,#203122,.T.); +#203122 = EDGE_CURVE('',#203092,#203123,#203125,.T.); +#203123 = VERTEX_POINT('',#203124); +#203124 = CARTESIAN_POINT('',(129.799509,-75.981921,1.545)); +#203125 = LINE('',#203126,#203127); +#203126 = CARTESIAN_POINT('',(129.25,-75.98,1.545)); +#203127 = VECTOR('',#203128,1.); +#203128 = DIRECTION('',(0.999993889579,-3.495826750567E-03,0.)); +#203129 = ORIENTED_EDGE('',*,*,#203130,.F.); +#203130 = EDGE_CURVE('',#203131,#203123,#203133,.T.); +#203131 = VERTEX_POINT('',#203132); +#203132 = CARTESIAN_POINT('',(129.799509,-75.981921,1.51)); +#203133 = LINE('',#203134,#203135); +#203134 = CARTESIAN_POINT('',(129.799509,-75.981921,1.51)); +#203135 = VECTOR('',#203136,1.); +#203136 = DIRECTION('',(0.,0.,1.)); +#203137 = ORIENTED_EDGE('',*,*,#203138,.F.); +#203138 = EDGE_CURVE('',#203100,#203131,#203139,.T.); +#203139 = LINE('',#203140,#203141); +#203140 = CARTESIAN_POINT('',(129.25,-75.98,1.51)); +#203141 = VECTOR('',#203142,1.); +#203142 = DIRECTION('',(0.999993889579,-3.495826750567E-03,0.)); +#203143 = PLANE('',#203144); +#203144 = AXIS2_PLACEMENT_3D('',#203145,#203146,#203147); +#203145 = CARTESIAN_POINT('',(129.25,-75.98,1.51)); +#203146 = DIRECTION('',(3.495826750567E-03,0.999993889579,-0.)); +#203147 = DIRECTION('',(0.999993889579,-3.495826750567E-03,0.)); +#203148 = ADVANCED_FACE('',(#203149),#203176,.T.); +#203149 = FACE_BOUND('',#203150,.T.); +#203150 = EDGE_LOOP('',(#203151,#203152,#203161,#203169)); +#203151 = ORIENTED_EDGE('',*,*,#203130,.T.); +#203152 = ORIENTED_EDGE('',*,*,#203153,.T.); +#203153 = EDGE_CURVE('',#203123,#203154,#203156,.T.); +#203154 = VERTEX_POINT('',#203155); +#203155 = CARTESIAN_POINT('',(129.799509,-76.178079,1.545)); +#203156 = CIRCLE('',#203157,0.100000456609); +#203157 = AXIS2_PLACEMENT_3D('',#203158,#203159,#203160); +#203158 = CARTESIAN_POINT('',(129.78,-76.08,1.545)); +#203159 = DIRECTION('',(0.,0.,-1.)); +#203160 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#203161 = ORIENTED_EDGE('',*,*,#203162,.F.); +#203162 = EDGE_CURVE('',#203163,#203154,#203165,.T.); +#203163 = VERTEX_POINT('',#203164); +#203164 = CARTESIAN_POINT('',(129.799509,-76.178079,1.51)); +#203165 = LINE('',#203166,#203167); +#203166 = CARTESIAN_POINT('',(129.799509,-76.178079,1.51)); +#203167 = VECTOR('',#203168,1.); +#203168 = DIRECTION('',(0.,0.,1.)); +#203169 = ORIENTED_EDGE('',*,*,#203170,.F.); +#203170 = EDGE_CURVE('',#203131,#203163,#203171,.T.); +#203171 = CIRCLE('',#203172,0.100000456609); +#203172 = AXIS2_PLACEMENT_3D('',#203173,#203174,#203175); +#203173 = CARTESIAN_POINT('',(129.78,-76.08,1.51)); +#203174 = DIRECTION('',(0.,0.,-1.)); +#203175 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#203176 = CYLINDRICAL_SURFACE('',#203177,0.100000456609); +#203177 = AXIS2_PLACEMENT_3D('',#203178,#203179,#203180); +#203178 = CARTESIAN_POINT('',(129.78,-76.08,1.51)); +#203179 = DIRECTION('',(0.,0.,-1.)); +#203180 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#203181 = ADVANCED_FACE('',(#203182),#203207,.T.); +#203182 = FACE_BOUND('',#203183,.T.); +#203183 = EDGE_LOOP('',(#203184,#203185,#203193,#203201)); +#203184 = ORIENTED_EDGE('',*,*,#203162,.T.); +#203185 = ORIENTED_EDGE('',*,*,#203186,.T.); +#203186 = EDGE_CURVE('',#203154,#203187,#203189,.T.); +#203187 = VERTEX_POINT('',#203188); +#203188 = CARTESIAN_POINT('',(128.461421,-76.18,1.545)); +#203189 = LINE('',#203190,#203191); +#203190 = CARTESIAN_POINT('',(129.799509,-76.178079,1.545)); +#203191 = VECTOR('',#203192,1.); +#203192 = DIRECTION('',(-0.999998969484,-1.435629062056E-03,0.)); +#203193 = ORIENTED_EDGE('',*,*,#203194,.F.); +#203194 = EDGE_CURVE('',#203195,#203187,#203197,.T.); +#203195 = VERTEX_POINT('',#203196); +#203196 = CARTESIAN_POINT('',(128.461421,-76.18,1.51)); +#203197 = LINE('',#203198,#203199); +#203198 = CARTESIAN_POINT('',(128.461421,-76.18,1.51)); +#203199 = VECTOR('',#203200,1.); +#203200 = DIRECTION('',(0.,0.,1.)); +#203201 = ORIENTED_EDGE('',*,*,#203202,.F.); +#203202 = EDGE_CURVE('',#203163,#203195,#203203,.T.); +#203203 = LINE('',#203204,#203205); +#203204 = CARTESIAN_POINT('',(129.799509,-76.178079,1.51)); +#203205 = VECTOR('',#203206,1.); +#203206 = DIRECTION('',(-0.999998969484,-1.435629062056E-03,0.)); +#203207 = PLANE('',#203208); +#203208 = AXIS2_PLACEMENT_3D('',#203209,#203210,#203211); +#203209 = CARTESIAN_POINT('',(129.799509,-76.178079,1.51)); +#203210 = DIRECTION('',(1.435629062056E-03,-0.999998969484,0.)); +#203211 = DIRECTION('',(-0.999998969484,-1.435629062056E-03,0.)); +#203212 = ADVANCED_FACE('',(#203213),#203238,.T.); +#203213 = FACE_BOUND('',#203214,.T.); +#203214 = EDGE_LOOP('',(#203215,#203216,#203224,#203232)); +#203215 = ORIENTED_EDGE('',*,*,#203194,.T.); +#203216 = ORIENTED_EDGE('',*,*,#203217,.T.); +#203217 = EDGE_CURVE('',#203187,#203218,#203220,.T.); +#203218 = VERTEX_POINT('',#203219); +#203219 = CARTESIAN_POINT('',(128.2695,-76.371921,1.545)); +#203220 = LINE('',#203221,#203222); +#203221 = CARTESIAN_POINT('',(128.461421,-76.18,1.545)); +#203222 = VECTOR('',#203223,1.); +#203223 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203224 = ORIENTED_EDGE('',*,*,#203225,.F.); +#203225 = EDGE_CURVE('',#203226,#203218,#203228,.T.); +#203226 = VERTEX_POINT('',#203227); +#203227 = CARTESIAN_POINT('',(128.2695,-76.371921,1.51)); +#203228 = LINE('',#203229,#203230); +#203229 = CARTESIAN_POINT('',(128.2695,-76.371921,1.51)); +#203230 = VECTOR('',#203231,1.); +#203231 = DIRECTION('',(0.,0.,1.)); +#203232 = ORIENTED_EDGE('',*,*,#203233,.F.); +#203233 = EDGE_CURVE('',#203195,#203226,#203234,.T.); +#203234 = LINE('',#203235,#203236); +#203235 = CARTESIAN_POINT('',(128.461421,-76.18,1.51)); +#203236 = VECTOR('',#203237,1.); +#203237 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203238 = PLANE('',#203239); +#203239 = AXIS2_PLACEMENT_3D('',#203240,#203241,#203242); +#203240 = CARTESIAN_POINT('',(128.461421,-76.18,1.51)); +#203241 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#203242 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#203243 = ADVANCED_FACE('',(#203244),#203269,.T.); +#203244 = FACE_BOUND('',#203245,.T.); +#203245 = EDGE_LOOP('',(#203246,#203247,#203255,#203263)); +#203246 = ORIENTED_EDGE('',*,*,#203225,.T.); +#203247 = ORIENTED_EDGE('',*,*,#203248,.T.); +#203248 = EDGE_CURVE('',#203218,#203249,#203251,.T.); +#203249 = VERTEX_POINT('',#203250); +#203250 = CARTESIAN_POINT('',(128.277164,-76.385195,1.545)); +#203251 = LINE('',#203252,#203253); +#203252 = CARTESIAN_POINT('',(128.2695,-76.371921,1.545)); +#203253 = VECTOR('',#203254,1.); +#203254 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203255 = ORIENTED_EDGE('',*,*,#203256,.F.); +#203256 = EDGE_CURVE('',#203257,#203249,#203259,.T.); +#203257 = VERTEX_POINT('',#203258); +#203258 = CARTESIAN_POINT('',(128.277164,-76.385195,1.51)); +#203259 = LINE('',#203260,#203261); +#203260 = CARTESIAN_POINT('',(128.277164,-76.385195,1.51)); +#203261 = VECTOR('',#203262,1.); +#203262 = DIRECTION('',(0.,0.,1.)); +#203263 = ORIENTED_EDGE('',*,*,#203264,.F.); +#203264 = EDGE_CURVE('',#203226,#203257,#203265,.T.); +#203265 = LINE('',#203266,#203267); +#203266 = CARTESIAN_POINT('',(128.2695,-76.371921,1.51)); +#203267 = VECTOR('',#203268,1.); +#203268 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203269 = PLANE('',#203270); +#203270 = AXIS2_PLACEMENT_3D('',#203271,#203272,#203273); +#203271 = CARTESIAN_POINT('',(128.2695,-76.371921,1.51)); +#203272 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#203273 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203274 = ADVANCED_FACE('',(#203275),#203302,.T.); +#203275 = FACE_BOUND('',#203276,.T.); +#203276 = EDGE_LOOP('',(#203277,#203278,#203287,#203295)); +#203277 = ORIENTED_EDGE('',*,*,#203256,.T.); +#203278 = ORIENTED_EDGE('',*,*,#203279,.T.); +#203279 = EDGE_CURVE('',#203249,#203280,#203282,.T.); +#203280 = VERTEX_POINT('',#203281); +#203281 = CARTESIAN_POINT('',(128.114805,-76.222836,1.545)); +#203282 = CIRCLE('',#203283,0.299999934501); +#203283 = AXIS2_PLACEMENT_3D('',#203284,#203285,#203286); +#203284 = CARTESIAN_POINT('',(128.00000014059,-76.4999998594,1.545)); +#203285 = DIRECTION('',(0.,0.,-1.)); +#203286 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#203287 = ORIENTED_EDGE('',*,*,#203288,.F.); +#203288 = EDGE_CURVE('',#203289,#203280,#203291,.T.); +#203289 = VERTEX_POINT('',#203290); +#203290 = CARTESIAN_POINT('',(128.114805,-76.222836,1.51)); +#203291 = LINE('',#203292,#203293); +#203292 = CARTESIAN_POINT('',(128.114805,-76.222836,1.51)); +#203293 = VECTOR('',#203294,1.); +#203294 = DIRECTION('',(0.,0.,1.)); +#203295 = ORIENTED_EDGE('',*,*,#203296,.F.); +#203296 = EDGE_CURVE('',#203257,#203289,#203297,.T.); +#203297 = CIRCLE('',#203298,0.299999934501); +#203298 = AXIS2_PLACEMENT_3D('',#203299,#203300,#203301); +#203299 = CARTESIAN_POINT('',(128.00000014059,-76.4999998594,1.51)); +#203300 = DIRECTION('',(0.,0.,-1.)); +#203301 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#203302 = CYLINDRICAL_SURFACE('',#203303,0.299999934501); +#203303 = AXIS2_PLACEMENT_3D('',#203304,#203305,#203306); +#203304 = CARTESIAN_POINT('',(128.00000014059,-76.4999998594,1.51)); +#203305 = DIRECTION('',(0.,0.,-1.)); +#203306 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#203307 = ADVANCED_FACE('',(#203308),#203333,.T.); +#203308 = FACE_BOUND('',#203309,.T.); +#203309 = EDGE_LOOP('',(#203310,#203311,#203319,#203327)); +#203310 = ORIENTED_EDGE('',*,*,#203288,.T.); +#203311 = ORIENTED_EDGE('',*,*,#203312,.T.); +#203312 = EDGE_CURVE('',#203280,#203313,#203315,.T.); +#203313 = VERTEX_POINT('',#203314); +#203314 = CARTESIAN_POINT('',(128.128078,-76.230499,1.545)); +#203315 = LINE('',#203316,#203317); +#203316 = CARTESIAN_POINT('',(128.114805,-76.222836,1.545)); +#203317 = VECTOR('',#203318,1.); +#203318 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203319 = ORIENTED_EDGE('',*,*,#203320,.F.); +#203320 = EDGE_CURVE('',#203321,#203313,#203323,.T.); +#203321 = VERTEX_POINT('',#203322); +#203322 = CARTESIAN_POINT('',(128.128078,-76.230499,1.51)); +#203323 = LINE('',#203324,#203325); +#203324 = CARTESIAN_POINT('',(128.128078,-76.230499,1.51)); +#203325 = VECTOR('',#203326,1.); +#203326 = DIRECTION('',(0.,0.,1.)); +#203327 = ORIENTED_EDGE('',*,*,#203328,.F.); +#203328 = EDGE_CURVE('',#203289,#203321,#203329,.T.); +#203329 = LINE('',#203330,#203331); +#203330 = CARTESIAN_POINT('',(128.114805,-76.222836,1.51)); +#203331 = VECTOR('',#203332,1.); +#203332 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203333 = PLANE('',#203334); +#203334 = AXIS2_PLACEMENT_3D('',#203335,#203336,#203337); +#203335 = CARTESIAN_POINT('',(128.114805,-76.222836,1.51)); +#203336 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#203337 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203338 = ADVANCED_FACE('',(#203339),#203355,.T.); +#203339 = FACE_BOUND('',#203340,.T.); +#203340 = EDGE_LOOP('',(#203341,#203342,#203348,#203349)); +#203341 = ORIENTED_EDGE('',*,*,#203320,.T.); +#203342 = ORIENTED_EDGE('',*,*,#203343,.T.); +#203343 = EDGE_CURVE('',#203313,#203053,#203344,.T.); +#203344 = LINE('',#203345,#203346); +#203345 = CARTESIAN_POINT('',(128.128078,-76.230499,1.545)); +#203346 = VECTOR('',#203347,1.); +#203347 = DIRECTION('',(0.711185473275,0.703004425735,0.)); +#203348 = ORIENTED_EDGE('',*,*,#203050,.F.); +#203349 = ORIENTED_EDGE('',*,*,#203350,.F.); +#203350 = EDGE_CURVE('',#203321,#203051,#203351,.T.); +#203351 = LINE('',#203352,#203353); +#203352 = CARTESIAN_POINT('',(128.128078,-76.230499,1.51)); +#203353 = VECTOR('',#203354,1.); +#203354 = DIRECTION('',(0.711185473275,0.703004425735,0.)); +#203355 = PLANE('',#203356); +#203356 = AXIS2_PLACEMENT_3D('',#203357,#203358,#203359); +#203357 = CARTESIAN_POINT('',(128.128078,-76.230499,1.51)); +#203358 = DIRECTION('',(-0.703004425735,0.711185473275,0.)); +#203359 = DIRECTION('',(0.711185473275,0.703004425735,0.)); +#203360 = ADVANCED_FACE('',(#203361),#203388,.F.); +#203361 = FACE_BOUND('',#203362,.T.); +#203362 = EDGE_LOOP('',(#203363,#203373,#203380,#203381)); +#203363 = ORIENTED_EDGE('',*,*,#203364,.T.); +#203364 = EDGE_CURVE('',#203365,#203367,#203369,.T.); +#203365 = VERTEX_POINT('',#203366); +#203366 = CARTESIAN_POINT('',(128.137255,-76.5,1.51)); +#203367 = VERTEX_POINT('',#203368); +#203368 = CARTESIAN_POINT('',(128.137255,-76.5,1.545)); +#203369 = LINE('',#203370,#203371); +#203370 = CARTESIAN_POINT('',(128.137255,-76.5,1.51)); +#203371 = VECTOR('',#203372,1.); +#203372 = DIRECTION('',(0.,0.,1.)); +#203373 = ORIENTED_EDGE('',*,*,#203374,.T.); +#203374 = EDGE_CURVE('',#203367,#203367,#203375,.T.); +#203375 = CIRCLE('',#203376,0.137255); +#203376 = AXIS2_PLACEMENT_3D('',#203377,#203378,#203379); +#203377 = CARTESIAN_POINT('',(128.,-76.5,1.545)); +#203378 = DIRECTION('',(0.,0.,1.)); +#203379 = DIRECTION('',(1.,0.,-0.)); +#203380 = ORIENTED_EDGE('',*,*,#203364,.F.); +#203381 = ORIENTED_EDGE('',*,*,#203382,.F.); +#203382 = EDGE_CURVE('',#203365,#203365,#203383,.T.); +#203383 = CIRCLE('',#203384,0.137255); +#203384 = AXIS2_PLACEMENT_3D('',#203385,#203386,#203387); +#203385 = CARTESIAN_POINT('',(128.,-76.5,1.51)); +#203386 = DIRECTION('',(0.,0.,1.)); +#203387 = DIRECTION('',(1.,0.,-0.)); +#203388 = CYLINDRICAL_SURFACE('',#203389,0.137255); +#203389 = AXIS2_PLACEMENT_3D('',#203390,#203391,#203392); +#203390 = CARTESIAN_POINT('',(128.,-76.5,1.51)); +#203391 = DIRECTION('',(-0.,-0.,-1.)); +#203392 = DIRECTION('',(1.,0.,-0.)); +#203393 = ADVANCED_FACE('',(#203394,#203406),#203409,.F.); +#203394 = FACE_BOUND('',#203395,.T.); +#203395 = EDGE_LOOP('',(#203396,#203397,#203398,#203399,#203400,#203401, + #203402,#203403,#203404,#203405)); +#203396 = ORIENTED_EDGE('',*,*,#203076,.T.); +#203397 = ORIENTED_EDGE('',*,*,#203107,.T.); +#203398 = ORIENTED_EDGE('',*,*,#203138,.T.); +#203399 = ORIENTED_EDGE('',*,*,#203170,.T.); +#203400 = ORIENTED_EDGE('',*,*,#203202,.T.); +#203401 = ORIENTED_EDGE('',*,*,#203233,.T.); +#203402 = ORIENTED_EDGE('',*,*,#203264,.T.); +#203403 = ORIENTED_EDGE('',*,*,#203296,.T.); +#203404 = ORIENTED_EDGE('',*,*,#203328,.T.); +#203405 = ORIENTED_EDGE('',*,*,#203350,.T.); +#203406 = FACE_BOUND('',#203407,.T.); +#203407 = EDGE_LOOP('',(#203408)); +#203408 = ORIENTED_EDGE('',*,*,#203382,.T.); +#203409 = PLANE('',#203410); +#203410 = AXIS2_PLACEMENT_3D('',#203411,#203412,#203413); +#203411 = CARTESIAN_POINT('',(0.,0.,1.51)); +#203412 = DIRECTION('',(0.,0.,1.)); +#203413 = DIRECTION('',(1.,0.,-0.)); +#203414 = ADVANCED_FACE('',(#203415,#203427),#203430,.T.); +#203415 = FACE_BOUND('',#203416,.F.); +#203416 = EDGE_LOOP('',(#203417,#203418,#203419,#203420,#203421,#203422, + #203423,#203424,#203425,#203426)); +#203417 = ORIENTED_EDGE('',*,*,#203060,.T.); +#203418 = ORIENTED_EDGE('',*,*,#203091,.T.); +#203419 = ORIENTED_EDGE('',*,*,#203122,.T.); +#203420 = ORIENTED_EDGE('',*,*,#203153,.T.); +#203421 = ORIENTED_EDGE('',*,*,#203186,.T.); +#203422 = ORIENTED_EDGE('',*,*,#203217,.T.); +#203423 = ORIENTED_EDGE('',*,*,#203248,.T.); +#203424 = ORIENTED_EDGE('',*,*,#203279,.T.); +#203425 = ORIENTED_EDGE('',*,*,#203312,.T.); +#203426 = ORIENTED_EDGE('',*,*,#203343,.T.); +#203427 = FACE_BOUND('',#203428,.F.); +#203428 = EDGE_LOOP('',(#203429)); +#203429 = ORIENTED_EDGE('',*,*,#203374,.T.); +#203430 = PLANE('',#203431); +#203431 = AXIS2_PLACEMENT_3D('',#203432,#203433,#203434); +#203432 = CARTESIAN_POINT('',(0.,0.,1.545)); +#203433 = DIRECTION('',(0.,0.,1.)); +#203434 = DIRECTION('',(1.,0.,-0.)); +#203435 = MANIFOLD_SOLID_BREP('',#203436); +#203436 = CLOSED_SHELL('',(#203437,#203477,#203508,#203539,#203570, + #203603,#203634,#203665,#203696,#203727,#203760,#203782,#203815, + #203848,#203873)); +#203437 = ADVANCED_FACE('',(#203438),#203472,.F.); +#203438 = FACE_BOUND('',#203439,.F.); +#203439 = EDGE_LOOP('',(#203440,#203450,#203458,#203466)); +#203440 = ORIENTED_EDGE('',*,*,#203441,.T.); +#203441 = EDGE_CURVE('',#203442,#203444,#203446,.T.); +#203442 = VERTEX_POINT('',#203443); +#203443 = CARTESIAN_POINT('',(128.1,-76.78113,0.)); +#203444 = VERTEX_POINT('',#203445); +#203445 = CARTESIAN_POINT('',(128.1,-76.78113,-3.5E-02)); +#203446 = LINE('',#203447,#203448); +#203447 = CARTESIAN_POINT('',(128.1,-76.78113,0.)); +#203448 = VECTOR('',#203449,1.); +#203449 = DIRECTION('',(0.,0.,-1.)); +#203450 = ORIENTED_EDGE('',*,*,#203451,.T.); +#203451 = EDGE_CURVE('',#203444,#203452,#203454,.T.); +#203452 = VERTEX_POINT('',#203453); +#203453 = CARTESIAN_POINT('',(128.098079,-97.784914,-3.5E-02)); +#203454 = LINE('',#203455,#203456); +#203455 = CARTESIAN_POINT('',(128.1,-76.78113,-3.5E-02)); +#203456 = VECTOR('',#203457,1.); +#203457 = DIRECTION('',(-9.145970992404E-05,-0.999999995818,0.)); +#203458 = ORIENTED_EDGE('',*,*,#203459,.F.); +#203459 = EDGE_CURVE('',#203460,#203452,#203462,.T.); +#203460 = VERTEX_POINT('',#203461); +#203461 = CARTESIAN_POINT('',(128.098079,-97.784914,0.)); +#203462 = LINE('',#203463,#203464); +#203463 = CARTESIAN_POINT('',(128.098079,-97.784914,0.)); +#203464 = VECTOR('',#203465,1.); +#203465 = DIRECTION('',(0.,0.,-1.)); +#203466 = ORIENTED_EDGE('',*,*,#203467,.F.); +#203467 = EDGE_CURVE('',#203442,#203460,#203468,.T.); +#203468 = LINE('',#203469,#203470); +#203469 = CARTESIAN_POINT('',(128.1,-76.78113,0.)); +#203470 = VECTOR('',#203471,1.); +#203471 = DIRECTION('',(-9.145970992404E-05,-0.999999995818,0.)); +#203472 = PLANE('',#203473); +#203473 = AXIS2_PLACEMENT_3D('',#203474,#203475,#203476); +#203474 = CARTESIAN_POINT('',(128.1,-76.78113,0.)); +#203475 = DIRECTION('',(-0.999999995818,9.145970992404E-05,0.)); +#203476 = DIRECTION('',(-9.145970992404E-05,-0.999999995818,0.)); +#203477 = ADVANCED_FACE('',(#203478),#203503,.F.); +#203478 = FACE_BOUND('',#203479,.F.); +#203479 = EDGE_LOOP('',(#203480,#203481,#203489,#203497)); +#203480 = ORIENTED_EDGE('',*,*,#203459,.T.); +#203481 = ORIENTED_EDGE('',*,*,#203482,.T.); +#203482 = EDGE_CURVE('',#203452,#203483,#203485,.T.); +#203483 = VERTEX_POINT('',#203484); +#203484 = CARTESIAN_POINT('',(128.083147,-97.820962,-3.5E-02)); +#203485 = LINE('',#203486,#203487); +#203486 = CARTESIAN_POINT('',(128.098079,-97.784914,-3.5E-02)); +#203487 = VECTOR('',#203488,1.); +#203488 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#203489 = ORIENTED_EDGE('',*,*,#203490,.F.); +#203490 = EDGE_CURVE('',#203491,#203483,#203493,.T.); +#203491 = VERTEX_POINT('',#203492); +#203492 = CARTESIAN_POINT('',(128.083147,-97.820962,0.)); +#203493 = LINE('',#203494,#203495); +#203494 = CARTESIAN_POINT('',(128.083147,-97.820962,0.)); +#203495 = VECTOR('',#203496,1.); +#203496 = DIRECTION('',(0.,0.,-1.)); +#203497 = ORIENTED_EDGE('',*,*,#203498,.F.); +#203498 = EDGE_CURVE('',#203460,#203491,#203499,.T.); +#203499 = LINE('',#203500,#203501); +#203500 = CARTESIAN_POINT('',(128.098079,-97.784914,0.)); +#203501 = VECTOR('',#203502,1.); +#203502 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#203503 = PLANE('',#203504); +#203504 = AXIS2_PLACEMENT_3D('',#203505,#203506,#203507); +#203505 = CARTESIAN_POINT('',(128.098079,-97.784914,0.)); +#203506 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#203507 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#203508 = ADVANCED_FACE('',(#203509),#203534,.F.); +#203509 = FACE_BOUND('',#203510,.F.); +#203510 = EDGE_LOOP('',(#203511,#203512,#203520,#203528)); +#203511 = ORIENTED_EDGE('',*,*,#203490,.T.); +#203512 = ORIENTED_EDGE('',*,*,#203513,.T.); +#203513 = EDGE_CURVE('',#203483,#203514,#203516,.T.); +#203514 = VERTEX_POINT('',#203515); +#203515 = CARTESIAN_POINT('',(125.610312,-100.296514,-3.5E-02)); +#203516 = LINE('',#203517,#203518); +#203517 = CARTESIAN_POINT('',(128.083147,-97.820962,-3.5E-02)); +#203518 = VECTOR('',#203519,1.); +#203519 = DIRECTION('',(-0.706718425088,-0.70749492411,0.)); +#203520 = ORIENTED_EDGE('',*,*,#203521,.F.); +#203521 = EDGE_CURVE('',#203522,#203514,#203524,.T.); +#203522 = VERTEX_POINT('',#203523); +#203523 = CARTESIAN_POINT('',(125.610312,-100.296514,0.)); +#203524 = LINE('',#203525,#203526); +#203525 = CARTESIAN_POINT('',(125.610312,-100.296514,0.)); +#203526 = VECTOR('',#203527,1.); +#203527 = DIRECTION('',(0.,0.,-1.)); +#203528 = ORIENTED_EDGE('',*,*,#203529,.F.); +#203529 = EDGE_CURVE('',#203491,#203522,#203530,.T.); +#203530 = LINE('',#203531,#203532); +#203531 = CARTESIAN_POINT('',(128.083147,-97.820962,0.)); +#203532 = VECTOR('',#203533,1.); +#203533 = DIRECTION('',(-0.706718425088,-0.70749492411,0.)); +#203534 = PLANE('',#203535); +#203535 = AXIS2_PLACEMENT_3D('',#203536,#203537,#203538); +#203536 = CARTESIAN_POINT('',(128.083147,-97.820962,0.)); +#203537 = DIRECTION('',(-0.70749492411,0.706718425088,0.)); +#203538 = DIRECTION('',(-0.706718425088,-0.70749492411,0.)); +#203539 = ADVANCED_FACE('',(#203540),#203565,.F.); +#203540 = FACE_BOUND('',#203541,.F.); +#203541 = EDGE_LOOP('',(#203542,#203543,#203551,#203559)); +#203542 = ORIENTED_EDGE('',*,*,#203521,.T.); +#203543 = ORIENTED_EDGE('',*,*,#203544,.T.); +#203544 = EDGE_CURVE('',#203514,#203545,#203547,.T.); +#203545 = VERTEX_POINT('',#203546); +#203546 = CARTESIAN_POINT('',(125.617976,-100.309788,-3.5E-02)); +#203547 = LINE('',#203548,#203549); +#203548 = CARTESIAN_POINT('',(125.610312,-100.296514,-3.5E-02)); +#203549 = VECTOR('',#203550,1.); +#203550 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203551 = ORIENTED_EDGE('',*,*,#203552,.F.); +#203552 = EDGE_CURVE('',#203553,#203545,#203555,.T.); +#203553 = VERTEX_POINT('',#203554); +#203554 = CARTESIAN_POINT('',(125.617976,-100.309788,0.)); +#203555 = LINE('',#203556,#203557); +#203556 = CARTESIAN_POINT('',(125.617976,-100.309788,0.)); +#203557 = VECTOR('',#203558,1.); +#203558 = DIRECTION('',(0.,0.,-1.)); +#203559 = ORIENTED_EDGE('',*,*,#203560,.F.); +#203560 = EDGE_CURVE('',#203522,#203553,#203561,.T.); +#203561 = LINE('',#203562,#203563); +#203562 = CARTESIAN_POINT('',(125.610312,-100.296514,0.)); +#203563 = VECTOR('',#203564,1.); +#203564 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203565 = PLANE('',#203566); +#203566 = AXIS2_PLACEMENT_3D('',#203567,#203568,#203569); +#203567 = CARTESIAN_POINT('',(125.610312,-100.296514,0.)); +#203568 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#203569 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#203570 = ADVANCED_FACE('',(#203571),#203598,.T.); +#203571 = FACE_BOUND('',#203572,.F.); +#203572 = EDGE_LOOP('',(#203573,#203574,#203583,#203591)); +#203573 = ORIENTED_EDGE('',*,*,#203552,.T.); +#203574 = ORIENTED_EDGE('',*,*,#203575,.T.); +#203575 = EDGE_CURVE('',#203545,#203576,#203578,.T.); +#203576 = VERTEX_POINT('',#203577); +#203577 = CARTESIAN_POINT('',(125.455617,-100.147429,-3.5E-02)); +#203578 = CIRCLE('',#203579,0.299999934501); +#203579 = AXIS2_PLACEMENT_3D('',#203580,#203581,#203582); +#203580 = CARTESIAN_POINT('',(125.34081214059,-100.4245928594,-3.5E-02) + ); +#203581 = DIRECTION('',(0.,0.,-1.)); +#203582 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#203583 = ORIENTED_EDGE('',*,*,#203584,.F.); +#203584 = EDGE_CURVE('',#203585,#203576,#203587,.T.); +#203585 = VERTEX_POINT('',#203586); +#203586 = CARTESIAN_POINT('',(125.455617,-100.147429,0.)); +#203587 = LINE('',#203588,#203589); +#203588 = CARTESIAN_POINT('',(125.455617,-100.147429,0.)); +#203589 = VECTOR('',#203590,1.); +#203590 = DIRECTION('',(0.,0.,-1.)); +#203591 = ORIENTED_EDGE('',*,*,#203592,.F.); +#203592 = EDGE_CURVE('',#203553,#203585,#203593,.T.); +#203593 = CIRCLE('',#203594,0.299999934501); +#203594 = AXIS2_PLACEMENT_3D('',#203595,#203596,#203597); +#203595 = CARTESIAN_POINT('',(125.34081214059,-100.4245928594,0.)); +#203596 = DIRECTION('',(0.,0.,-1.)); +#203597 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#203598 = CYLINDRICAL_SURFACE('',#203599,0.299999934501); +#203599 = AXIS2_PLACEMENT_3D('',#203600,#203601,#203602); +#203600 = CARTESIAN_POINT('',(125.34081214059,-100.4245928594,0.)); +#203601 = DIRECTION('',(-0.,-0.,1.)); +#203602 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#203603 = ADVANCED_FACE('',(#203604),#203629,.F.); +#203604 = FACE_BOUND('',#203605,.F.); +#203605 = EDGE_LOOP('',(#203606,#203607,#203615,#203623)); +#203606 = ORIENTED_EDGE('',*,*,#203584,.T.); +#203607 = ORIENTED_EDGE('',*,*,#203608,.T.); +#203608 = EDGE_CURVE('',#203576,#203609,#203611,.T.); +#203609 = VERTEX_POINT('',#203610); +#203610 = CARTESIAN_POINT('',(125.46889,-100.155092,-3.5E-02)); +#203611 = LINE('',#203612,#203613); +#203612 = CARTESIAN_POINT('',(125.455617,-100.147429,-3.5E-02)); +#203613 = VECTOR('',#203614,1.); +#203614 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203615 = ORIENTED_EDGE('',*,*,#203616,.F.); +#203616 = EDGE_CURVE('',#203617,#203609,#203619,.T.); +#203617 = VERTEX_POINT('',#203618); +#203618 = CARTESIAN_POINT('',(125.46889,-100.155092,0.)); +#203619 = LINE('',#203620,#203621); +#203620 = CARTESIAN_POINT('',(125.46889,-100.155092,0.)); +#203621 = VECTOR('',#203622,1.); +#203622 = DIRECTION('',(0.,0.,-1.)); +#203623 = ORIENTED_EDGE('',*,*,#203624,.F.); +#203624 = EDGE_CURVE('',#203585,#203617,#203625,.T.); +#203625 = LINE('',#203626,#203627); +#203626 = CARTESIAN_POINT('',(125.455617,-100.147429,0.)); +#203627 = VECTOR('',#203628,1.); +#203628 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203629 = PLANE('',#203630); +#203630 = AXIS2_PLACEMENT_3D('',#203631,#203632,#203633); +#203631 = CARTESIAN_POINT('',(125.455617,-100.147429,0.)); +#203632 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#203633 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#203634 = ADVANCED_FACE('',(#203635),#203660,.F.); +#203635 = FACE_BOUND('',#203636,.F.); +#203636 = EDGE_LOOP('',(#203637,#203638,#203646,#203654)); +#203637 = ORIENTED_EDGE('',*,*,#203616,.T.); +#203638 = ORIENTED_EDGE('',*,*,#203639,.T.); +#203639 = EDGE_CURVE('',#203609,#203640,#203642,.T.); +#203640 = VERTEX_POINT('',#203641); +#203641 = CARTESIAN_POINT('',(127.9,-97.723983,-3.5E-02)); +#203642 = LINE('',#203643,#203644); +#203643 = CARTESIAN_POINT('',(125.46889,-100.155092,-3.5E-02)); +#203644 = VECTOR('',#203645,1.); +#203645 = DIRECTION('',(0.707106926615,0.707106635758,0.)); +#203646 = ORIENTED_EDGE('',*,*,#203647,.F.); +#203647 = EDGE_CURVE('',#203648,#203640,#203650,.T.); +#203648 = VERTEX_POINT('',#203649); +#203649 = CARTESIAN_POINT('',(127.9,-97.723983,0.)); +#203650 = LINE('',#203651,#203652); +#203651 = CARTESIAN_POINT('',(127.9,-97.723983,0.)); +#203652 = VECTOR('',#203653,1.); +#203653 = DIRECTION('',(0.,0.,-1.)); +#203654 = ORIENTED_EDGE('',*,*,#203655,.F.); +#203655 = EDGE_CURVE('',#203617,#203648,#203656,.T.); +#203656 = LINE('',#203657,#203658); +#203657 = CARTESIAN_POINT('',(125.46889,-100.155092,0.)); +#203658 = VECTOR('',#203659,1.); +#203659 = DIRECTION('',(0.707106926615,0.707106635758,0.)); +#203660 = PLANE('',#203661); +#203661 = AXIS2_PLACEMENT_3D('',#203662,#203663,#203664); +#203662 = CARTESIAN_POINT('',(125.46889,-100.155092,0.)); +#203663 = DIRECTION('',(0.707106635758,-0.707106926615,0.)); +#203664 = DIRECTION('',(0.707106926615,0.707106635758,0.)); +#203665 = ADVANCED_FACE('',(#203666),#203691,.F.); +#203666 = FACE_BOUND('',#203667,.F.); +#203667 = EDGE_LOOP('',(#203668,#203669,#203677,#203685)); +#203668 = ORIENTED_EDGE('',*,*,#203647,.T.); +#203669 = ORIENTED_EDGE('',*,*,#203670,.T.); +#203670 = EDGE_CURVE('',#203640,#203671,#203673,.T.); +#203671 = VERTEX_POINT('',#203672); +#203672 = CARTESIAN_POINT('',(127.9,-76.78113,-3.5E-02)); +#203673 = LINE('',#203674,#203675); +#203674 = CARTESIAN_POINT('',(127.9,-97.723983,-3.5E-02)); +#203675 = VECTOR('',#203676,1.); +#203676 = DIRECTION('',(0.,1.,0.)); +#203677 = ORIENTED_EDGE('',*,*,#203678,.F.); +#203678 = EDGE_CURVE('',#203679,#203671,#203681,.T.); +#203679 = VERTEX_POINT('',#203680); +#203680 = CARTESIAN_POINT('',(127.9,-76.78113,0.)); +#203681 = LINE('',#203682,#203683); +#203682 = CARTESIAN_POINT('',(127.9,-76.78113,0.)); +#203683 = VECTOR('',#203684,1.); +#203684 = DIRECTION('',(0.,0.,-1.)); +#203685 = ORIENTED_EDGE('',*,*,#203686,.F.); +#203686 = EDGE_CURVE('',#203648,#203679,#203687,.T.); +#203687 = LINE('',#203688,#203689); +#203688 = CARTESIAN_POINT('',(127.9,-97.723983,0.)); +#203689 = VECTOR('',#203690,1.); +#203690 = DIRECTION('',(0.,1.,0.)); +#203691 = PLANE('',#203692); +#203692 = AXIS2_PLACEMENT_3D('',#203693,#203694,#203695); +#203693 = CARTESIAN_POINT('',(127.9,-97.723983,0.)); +#203694 = DIRECTION('',(1.,-0.,0.)); +#203695 = DIRECTION('',(0.,1.,0.)); +#203696 = ADVANCED_FACE('',(#203697),#203722,.F.); +#203697 = FACE_BOUND('',#203698,.F.); +#203698 = EDGE_LOOP('',(#203699,#203700,#203708,#203716)); +#203699 = ORIENTED_EDGE('',*,*,#203678,.T.); +#203700 = ORIENTED_EDGE('',*,*,#203701,.T.); +#203701 = EDGE_CURVE('',#203671,#203702,#203704,.T.); +#203702 = VERTEX_POINT('',#203703); +#203703 = CARTESIAN_POINT('',(127.885195,-76.777164,-3.5E-02)); +#203704 = LINE('',#203705,#203706); +#203705 = CARTESIAN_POINT('',(127.9,-76.78113,-3.5E-02)); +#203706 = VECTOR('',#203707,1.); +#203707 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#203708 = ORIENTED_EDGE('',*,*,#203709,.F.); +#203709 = EDGE_CURVE('',#203710,#203702,#203712,.T.); +#203710 = VERTEX_POINT('',#203711); +#203711 = CARTESIAN_POINT('',(127.885195,-76.777164,0.)); +#203712 = LINE('',#203713,#203714); +#203713 = CARTESIAN_POINT('',(127.885195,-76.777164,0.)); +#203714 = VECTOR('',#203715,1.); +#203715 = DIRECTION('',(0.,0.,-1.)); +#203716 = ORIENTED_EDGE('',*,*,#203717,.F.); +#203717 = EDGE_CURVE('',#203679,#203710,#203718,.T.); +#203718 = LINE('',#203719,#203720); +#203719 = CARTESIAN_POINT('',(127.9,-76.78113,0.)); +#203720 = VECTOR('',#203721,1.); +#203721 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#203722 = PLANE('',#203723); +#203723 = AXIS2_PLACEMENT_3D('',#203724,#203725,#203726); +#203724 = CARTESIAN_POINT('',(127.9,-76.78113,0.)); +#203725 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#203726 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#203727 = ADVANCED_FACE('',(#203728),#203755,.T.); +#203728 = FACE_BOUND('',#203729,.F.); +#203729 = EDGE_LOOP('',(#203730,#203731,#203740,#203748)); +#203730 = ORIENTED_EDGE('',*,*,#203709,.T.); +#203731 = ORIENTED_EDGE('',*,*,#203732,.T.); +#203732 = EDGE_CURVE('',#203702,#203733,#203735,.T.); +#203733 = VERTEX_POINT('',#203734); +#203734 = CARTESIAN_POINT('',(128.114805,-76.777164,-3.5E-02)); +#203735 = CIRCLE('',#203736,0.299999472923); +#203736 = AXIS2_PLACEMENT_3D('',#203737,#203738,#203739); +#203737 = CARTESIAN_POINT('',(128.,-76.50000069844,-3.5E-02)); +#203738 = DIRECTION('',(0.,0.,-1.)); +#203739 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#203740 = ORIENTED_EDGE('',*,*,#203741,.F.); +#203741 = EDGE_CURVE('',#203742,#203733,#203744,.T.); +#203742 = VERTEX_POINT('',#203743); +#203743 = CARTESIAN_POINT('',(128.114805,-76.777164,0.)); +#203744 = LINE('',#203745,#203746); +#203745 = CARTESIAN_POINT('',(128.114805,-76.777164,0.)); +#203746 = VECTOR('',#203747,1.); +#203747 = DIRECTION('',(0.,0.,-1.)); +#203748 = ORIENTED_EDGE('',*,*,#203749,.F.); +#203749 = EDGE_CURVE('',#203710,#203742,#203750,.T.); +#203750 = CIRCLE('',#203751,0.299999472923); +#203751 = AXIS2_PLACEMENT_3D('',#203752,#203753,#203754); +#203752 = CARTESIAN_POINT('',(128.,-76.50000069844,0.)); +#203753 = DIRECTION('',(0.,0.,-1.)); +#203754 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#203755 = CYLINDRICAL_SURFACE('',#203756,0.299999472923); +#203756 = AXIS2_PLACEMENT_3D('',#203757,#203758,#203759); +#203757 = CARTESIAN_POINT('',(128.,-76.50000069844,0.)); +#203758 = DIRECTION('',(-0.,-0.,1.)); +#203759 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#203760 = ADVANCED_FACE('',(#203761),#203777,.F.); +#203761 = FACE_BOUND('',#203762,.F.); +#203762 = EDGE_LOOP('',(#203763,#203764,#203770,#203771)); +#203763 = ORIENTED_EDGE('',*,*,#203741,.T.); +#203764 = ORIENTED_EDGE('',*,*,#203765,.T.); +#203765 = EDGE_CURVE('',#203733,#203444,#203766,.T.); +#203766 = LINE('',#203767,#203768); +#203767 = CARTESIAN_POINT('',(128.114805,-76.777164,-3.5E-02)); +#203768 = VECTOR('',#203769,1.); +#203769 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#203770 = ORIENTED_EDGE('',*,*,#203441,.F.); +#203771 = ORIENTED_EDGE('',*,*,#203772,.F.); +#203772 = EDGE_CURVE('',#203742,#203442,#203773,.T.); +#203773 = LINE('',#203774,#203775); +#203774 = CARTESIAN_POINT('',(128.114805,-76.777164,0.)); +#203775 = VECTOR('',#203776,1.); +#203776 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#203777 = PLANE('',#203778); +#203778 = AXIS2_PLACEMENT_3D('',#203779,#203780,#203781); +#203779 = CARTESIAN_POINT('',(128.114805,-76.777164,0.)); +#203780 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#203781 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#203782 = ADVANCED_FACE('',(#203783),#203810,.F.); +#203783 = FACE_BOUND('',#203784,.F.); +#203784 = EDGE_LOOP('',(#203785,#203795,#203802,#203803)); +#203785 = ORIENTED_EDGE('',*,*,#203786,.T.); +#203786 = EDGE_CURVE('',#203787,#203789,#203791,.T.); +#203787 = VERTEX_POINT('',#203788); +#203788 = CARTESIAN_POINT('',(125.478067,-100.424593,0.)); +#203789 = VERTEX_POINT('',#203790); +#203790 = CARTESIAN_POINT('',(125.478067,-100.424593,-3.5E-02)); +#203791 = LINE('',#203792,#203793); +#203792 = CARTESIAN_POINT('',(125.478067,-100.424593,0.)); +#203793 = VECTOR('',#203794,1.); +#203794 = DIRECTION('',(0.,0.,-1.)); +#203795 = ORIENTED_EDGE('',*,*,#203796,.T.); +#203796 = EDGE_CURVE('',#203789,#203789,#203797,.T.); +#203797 = CIRCLE('',#203798,0.137255); +#203798 = AXIS2_PLACEMENT_3D('',#203799,#203800,#203801); +#203799 = CARTESIAN_POINT('',(125.340812,-100.424593,-3.5E-02)); +#203800 = DIRECTION('',(0.,0.,1.)); +#203801 = DIRECTION('',(1.,0.,-0.)); +#203802 = ORIENTED_EDGE('',*,*,#203786,.F.); +#203803 = ORIENTED_EDGE('',*,*,#203804,.F.); +#203804 = EDGE_CURVE('',#203787,#203787,#203805,.T.); +#203805 = CIRCLE('',#203806,0.137255); +#203806 = AXIS2_PLACEMENT_3D('',#203807,#203808,#203809); +#203807 = CARTESIAN_POINT('',(125.340812,-100.424593,0.)); +#203808 = DIRECTION('',(0.,0.,1.)); +#203809 = DIRECTION('',(1.,0.,-0.)); +#203810 = CYLINDRICAL_SURFACE('',#203811,0.137255); +#203811 = AXIS2_PLACEMENT_3D('',#203812,#203813,#203814); +#203812 = CARTESIAN_POINT('',(125.340812,-100.424593,0.)); +#203813 = DIRECTION('',(0.,0.,1.)); +#203814 = DIRECTION('',(1.,0.,-0.)); +#203815 = ADVANCED_FACE('',(#203816),#203843,.F.); +#203816 = FACE_BOUND('',#203817,.F.); +#203817 = EDGE_LOOP('',(#203818,#203828,#203835,#203836)); +#203818 = ORIENTED_EDGE('',*,*,#203819,.T.); +#203819 = EDGE_CURVE('',#203820,#203822,#203824,.T.); +#203820 = VERTEX_POINT('',#203821); +#203821 = CARTESIAN_POINT('',(128.137255,-76.5,0.)); +#203822 = VERTEX_POINT('',#203823); +#203823 = CARTESIAN_POINT('',(128.137255,-76.5,-3.5E-02)); +#203824 = LINE('',#203825,#203826); +#203825 = CARTESIAN_POINT('',(128.137255,-76.5,0.)); +#203826 = VECTOR('',#203827,1.); +#203827 = DIRECTION('',(0.,0.,-1.)); +#203828 = ORIENTED_EDGE('',*,*,#203829,.T.); +#203829 = EDGE_CURVE('',#203822,#203822,#203830,.T.); +#203830 = CIRCLE('',#203831,0.137255); +#203831 = AXIS2_PLACEMENT_3D('',#203832,#203833,#203834); +#203832 = CARTESIAN_POINT('',(128.,-76.5,-3.5E-02)); +#203833 = DIRECTION('',(0.,0.,1.)); +#203834 = DIRECTION('',(1.,0.,-0.)); +#203835 = ORIENTED_EDGE('',*,*,#203819,.F.); +#203836 = ORIENTED_EDGE('',*,*,#203837,.F.); +#203837 = EDGE_CURVE('',#203820,#203820,#203838,.T.); +#203838 = CIRCLE('',#203839,0.137255); +#203839 = AXIS2_PLACEMENT_3D('',#203840,#203841,#203842); +#203840 = CARTESIAN_POINT('',(128.,-76.5,0.)); +#203841 = DIRECTION('',(0.,0.,1.)); +#203842 = DIRECTION('',(1.,0.,-0.)); +#203843 = CYLINDRICAL_SURFACE('',#203844,0.137255); +#203844 = AXIS2_PLACEMENT_3D('',#203845,#203846,#203847); +#203845 = CARTESIAN_POINT('',(128.,-76.5,0.)); +#203846 = DIRECTION('',(0.,0.,1.)); +#203847 = DIRECTION('',(1.,0.,-0.)); +#203848 = ADVANCED_FACE('',(#203849,#203862,#203865),#203868,.F.); +#203849 = FACE_BOUND('',#203850,.F.); +#203850 = EDGE_LOOP('',(#203851,#203852,#203853,#203854,#203855,#203856, + #203857,#203858,#203859,#203860,#203861)); +#203851 = ORIENTED_EDGE('',*,*,#203467,.T.); +#203852 = ORIENTED_EDGE('',*,*,#203498,.T.); +#203853 = ORIENTED_EDGE('',*,*,#203529,.T.); +#203854 = ORIENTED_EDGE('',*,*,#203560,.T.); +#203855 = ORIENTED_EDGE('',*,*,#203592,.T.); +#203856 = ORIENTED_EDGE('',*,*,#203624,.T.); +#203857 = ORIENTED_EDGE('',*,*,#203655,.T.); +#203858 = ORIENTED_EDGE('',*,*,#203686,.T.); +#203859 = ORIENTED_EDGE('',*,*,#203717,.T.); +#203860 = ORIENTED_EDGE('',*,*,#203749,.T.); +#203861 = ORIENTED_EDGE('',*,*,#203772,.T.); +#203862 = FACE_BOUND('',#203863,.F.); +#203863 = EDGE_LOOP('',(#203864)); +#203864 = ORIENTED_EDGE('',*,*,#203804,.T.); +#203865 = FACE_BOUND('',#203866,.F.); +#203866 = EDGE_LOOP('',(#203867)); +#203867 = ORIENTED_EDGE('',*,*,#203837,.T.); +#203868 = PLANE('',#203869); +#203869 = AXIS2_PLACEMENT_3D('',#203870,#203871,#203872); +#203870 = CARTESIAN_POINT('',(0.,0.,0.)); +#203871 = DIRECTION('',(-0.,-0.,-1.)); +#203872 = DIRECTION('',(-1.,0.,0.)); +#203873 = ADVANCED_FACE('',(#203874,#203887,#203890),#203893,.T.); +#203874 = FACE_BOUND('',#203875,.T.); +#203875 = EDGE_LOOP('',(#203876,#203877,#203878,#203879,#203880,#203881, + #203882,#203883,#203884,#203885,#203886)); +#203876 = ORIENTED_EDGE('',*,*,#203451,.T.); +#203877 = ORIENTED_EDGE('',*,*,#203482,.T.); +#203878 = ORIENTED_EDGE('',*,*,#203513,.T.); +#203879 = ORIENTED_EDGE('',*,*,#203544,.T.); +#203880 = ORIENTED_EDGE('',*,*,#203575,.T.); +#203881 = ORIENTED_EDGE('',*,*,#203608,.T.); +#203882 = ORIENTED_EDGE('',*,*,#203639,.T.); +#203883 = ORIENTED_EDGE('',*,*,#203670,.T.); +#203884 = ORIENTED_EDGE('',*,*,#203701,.T.); +#203885 = ORIENTED_EDGE('',*,*,#203732,.T.); +#203886 = ORIENTED_EDGE('',*,*,#203765,.T.); +#203887 = FACE_BOUND('',#203888,.T.); +#203888 = EDGE_LOOP('',(#203889)); +#203889 = ORIENTED_EDGE('',*,*,#203796,.T.); +#203890 = FACE_BOUND('',#203891,.T.); +#203891 = EDGE_LOOP('',(#203892)); +#203892 = ORIENTED_EDGE('',*,*,#203829,.T.); +#203893 = PLANE('',#203894); +#203894 = AXIS2_PLACEMENT_3D('',#203895,#203896,#203897); +#203895 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#203896 = DIRECTION('',(-0.,-0.,-1.)); +#203897 = DIRECTION('',(-1.,0.,0.)); +#203898 = MANIFOLD_SOLID_BREP('',#203899); +#203899 = CLOSED_SHELL('',(#203900,#203942,#203973,#204004,#204035, + #204066,#204097,#204130,#204161,#204192,#204223,#204254,#204285, + #204318,#204349,#204380,#204411,#204433,#204466,#204494)); +#203900 = ADVANCED_FACE('',(#203901),#203937,.T.); +#203901 = FACE_BOUND('',#203902,.T.); +#203902 = EDGE_LOOP('',(#203903,#203913,#203922,#203930)); +#203903 = ORIENTED_EDGE('',*,*,#203904,.T.); +#203904 = EDGE_CURVE('',#203905,#203907,#203909,.T.); +#203905 = VERTEX_POINT('',#203906); +#203906 = CARTESIAN_POINT('',(122.630491,-89.373079,1.51)); +#203907 = VERTEX_POINT('',#203908); +#203908 = CARTESIAN_POINT('',(122.630491,-89.373079,1.545)); +#203909 = LINE('',#203910,#203911); +#203910 = CARTESIAN_POINT('',(122.630491,-89.373079,1.51)); +#203911 = VECTOR('',#203912,1.); +#203912 = DIRECTION('',(0.,0.,1.)); +#203913 = ORIENTED_EDGE('',*,*,#203914,.T.); +#203914 = EDGE_CURVE('',#203907,#203915,#203917,.T.); +#203915 = VERTEX_POINT('',#203916); +#203916 = CARTESIAN_POINT('',(122.630491,-89.176921,1.545)); +#203917 = CIRCLE('',#203918,0.100000456609); +#203918 = AXIS2_PLACEMENT_3D('',#203919,#203920,#203921); +#203919 = CARTESIAN_POINT('',(122.65,-89.275,1.545)); +#203920 = DIRECTION('',(0.,0.,-1.)); +#203921 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#203922 = ORIENTED_EDGE('',*,*,#203923,.F.); +#203923 = EDGE_CURVE('',#203924,#203915,#203926,.T.); +#203924 = VERTEX_POINT('',#203925); +#203925 = CARTESIAN_POINT('',(122.630491,-89.176921,1.51)); +#203926 = LINE('',#203927,#203928); +#203927 = CARTESIAN_POINT('',(122.630491,-89.176921,1.51)); +#203928 = VECTOR('',#203929,1.); +#203929 = DIRECTION('',(0.,0.,1.)); +#203930 = ORIENTED_EDGE('',*,*,#203931,.F.); +#203931 = EDGE_CURVE('',#203905,#203924,#203932,.T.); +#203932 = CIRCLE('',#203933,0.100000456609); +#203933 = AXIS2_PLACEMENT_3D('',#203934,#203935,#203936); +#203934 = CARTESIAN_POINT('',(122.65,-89.275,1.51)); +#203935 = DIRECTION('',(0.,0.,-1.)); +#203936 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#203937 = CYLINDRICAL_SURFACE('',#203938,0.100000456609); +#203938 = AXIS2_PLACEMENT_3D('',#203939,#203940,#203941); +#203939 = CARTESIAN_POINT('',(122.65,-89.275,1.51)); +#203940 = DIRECTION('',(0.,0.,-1.)); +#203941 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#203942 = ADVANCED_FACE('',(#203943),#203968,.T.); +#203943 = FACE_BOUND('',#203944,.T.); +#203944 = EDGE_LOOP('',(#203945,#203946,#203954,#203962)); +#203945 = ORIENTED_EDGE('',*,*,#203923,.T.); +#203946 = ORIENTED_EDGE('',*,*,#203947,.T.); +#203947 = EDGE_CURVE('',#203915,#203948,#203950,.T.); +#203948 = VERTEX_POINT('',#203949); +#203949 = CARTESIAN_POINT('',(124.044509,-89.176921,1.545)); +#203950 = LINE('',#203951,#203952); +#203951 = CARTESIAN_POINT('',(122.630491,-89.176921,1.545)); +#203952 = VECTOR('',#203953,1.); +#203953 = DIRECTION('',(1.,0.,0.)); +#203954 = ORIENTED_EDGE('',*,*,#203955,.F.); +#203955 = EDGE_CURVE('',#203956,#203948,#203958,.T.); +#203956 = VERTEX_POINT('',#203957); +#203957 = CARTESIAN_POINT('',(124.044509,-89.176921,1.51)); +#203958 = LINE('',#203959,#203960); +#203959 = CARTESIAN_POINT('',(124.044509,-89.176921,1.51)); +#203960 = VECTOR('',#203961,1.); +#203961 = DIRECTION('',(0.,0.,1.)); +#203962 = ORIENTED_EDGE('',*,*,#203963,.F.); +#203963 = EDGE_CURVE('',#203924,#203956,#203964,.T.); +#203964 = LINE('',#203965,#203966); +#203965 = CARTESIAN_POINT('',(122.630491,-89.176921,1.51)); +#203966 = VECTOR('',#203967,1.); +#203967 = DIRECTION('',(1.,0.,0.)); +#203968 = PLANE('',#203969); +#203969 = AXIS2_PLACEMENT_3D('',#203970,#203971,#203972); +#203970 = CARTESIAN_POINT('',(122.630491,-89.176921,1.51)); +#203971 = DIRECTION('',(0.,1.,0.)); +#203972 = DIRECTION('',(1.,0.,0.)); +#203973 = ADVANCED_FACE('',(#203974),#203999,.T.); +#203974 = FACE_BOUND('',#203975,.T.); +#203975 = EDGE_LOOP('',(#203976,#203977,#203985,#203993)); +#203976 = ORIENTED_EDGE('',*,*,#203955,.T.); +#203977 = ORIENTED_EDGE('',*,*,#203978,.T.); +#203978 = EDGE_CURVE('',#203948,#203979,#203981,.T.); +#203979 = VERTEX_POINT('',#203980); +#203980 = CARTESIAN_POINT('',(124.080557,-89.191853,1.545)); +#203981 = LINE('',#203982,#203983); +#203982 = CARTESIAN_POINT('',(124.044509,-89.176921,1.545)); +#203983 = VECTOR('',#203984,1.); +#203984 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#203985 = ORIENTED_EDGE('',*,*,#203986,.F.); +#203986 = EDGE_CURVE('',#203987,#203979,#203989,.T.); +#203987 = VERTEX_POINT('',#203988); +#203988 = CARTESIAN_POINT('',(124.080557,-89.191853,1.51)); +#203989 = LINE('',#203990,#203991); +#203990 = CARTESIAN_POINT('',(124.080557,-89.191853,1.51)); +#203991 = VECTOR('',#203992,1.); +#203992 = DIRECTION('',(0.,0.,1.)); +#203993 = ORIENTED_EDGE('',*,*,#203994,.F.); +#203994 = EDGE_CURVE('',#203956,#203987,#203995,.T.); +#203995 = LINE('',#203996,#203997); +#203996 = CARTESIAN_POINT('',(124.044509,-89.176921,1.51)); +#203997 = VECTOR('',#203998,1.); +#203998 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#203999 = PLANE('',#204000); +#204000 = AXIS2_PLACEMENT_3D('',#204001,#204002,#204003); +#204001 = CARTESIAN_POINT('',(124.044509,-89.176921,1.51)); +#204002 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#204003 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#204004 = ADVANCED_FACE('',(#204005),#204030,.T.); +#204005 = FACE_BOUND('',#204006,.T.); +#204006 = EDGE_LOOP('',(#204007,#204008,#204016,#204024)); +#204007 = ORIENTED_EDGE('',*,*,#203986,.T.); +#204008 = ORIENTED_EDGE('',*,*,#204009,.T.); +#204009 = EDGE_CURVE('',#203979,#204010,#204012,.T.); +#204010 = VERTEX_POINT('',#204011); +#204011 = CARTESIAN_POINT('',(125.291421,-90.4,1.545)); +#204012 = LINE('',#204013,#204014); +#204013 = CARTESIAN_POINT('',(124.080557,-89.191853,1.545)); +#204014 = VECTOR('',#204015,1.); +#204015 = DIRECTION('',(0.707900547307,-0.706312123019,0.)); +#204016 = ORIENTED_EDGE('',*,*,#204017,.F.); +#204017 = EDGE_CURVE('',#204018,#204010,#204020,.T.); +#204018 = VERTEX_POINT('',#204019); +#204019 = CARTESIAN_POINT('',(125.291421,-90.4,1.51)); +#204020 = LINE('',#204021,#204022); +#204021 = CARTESIAN_POINT('',(125.291421,-90.4,1.51)); +#204022 = VECTOR('',#204023,1.); +#204023 = DIRECTION('',(0.,0.,1.)); +#204024 = ORIENTED_EDGE('',*,*,#204025,.F.); +#204025 = EDGE_CURVE('',#203987,#204018,#204026,.T.); +#204026 = LINE('',#204027,#204028); +#204027 = CARTESIAN_POINT('',(124.080557,-89.191853,1.51)); +#204028 = VECTOR('',#204029,1.); +#204029 = DIRECTION('',(0.707900547307,-0.706312123019,0.)); +#204030 = PLANE('',#204031); +#204031 = AXIS2_PLACEMENT_3D('',#204032,#204033,#204034); +#204032 = CARTESIAN_POINT('',(124.080557,-89.191853,1.51)); +#204033 = DIRECTION('',(0.706312123019,0.707900547307,-0.)); +#204034 = DIRECTION('',(0.707900547307,-0.706312123019,0.)); +#204035 = ADVANCED_FACE('',(#204036),#204061,.T.); +#204036 = FACE_BOUND('',#204037,.T.); +#204037 = EDGE_LOOP('',(#204038,#204039,#204047,#204055)); +#204038 = ORIENTED_EDGE('',*,*,#204017,.T.); +#204039 = ORIENTED_EDGE('',*,*,#204040,.T.); +#204040 = EDGE_CURVE('',#204010,#204041,#204043,.T.); +#204041 = VERTEX_POINT('',#204042); +#204042 = CARTESIAN_POINT('',(125.618869,-90.4,1.545)); +#204043 = LINE('',#204044,#204045); +#204044 = CARTESIAN_POINT('',(125.291421,-90.4,1.545)); +#204045 = VECTOR('',#204046,1.); +#204046 = DIRECTION('',(1.,0.,0.)); +#204047 = ORIENTED_EDGE('',*,*,#204048,.F.); +#204048 = EDGE_CURVE('',#204049,#204041,#204051,.T.); +#204049 = VERTEX_POINT('',#204050); +#204050 = CARTESIAN_POINT('',(125.618869,-90.4,1.51)); +#204051 = LINE('',#204052,#204053); +#204052 = CARTESIAN_POINT('',(125.618869,-90.4,1.51)); +#204053 = VECTOR('',#204054,1.); +#204054 = DIRECTION('',(0.,0.,1.)); +#204055 = ORIENTED_EDGE('',*,*,#204056,.F.); +#204056 = EDGE_CURVE('',#204018,#204049,#204057,.T.); +#204057 = LINE('',#204058,#204059); +#204058 = CARTESIAN_POINT('',(125.291421,-90.4,1.51)); +#204059 = VECTOR('',#204060,1.); +#204060 = DIRECTION('',(1.,0.,0.)); +#204061 = PLANE('',#204062); +#204062 = AXIS2_PLACEMENT_3D('',#204063,#204064,#204065); +#204063 = CARTESIAN_POINT('',(125.291421,-90.4,1.51)); +#204064 = DIRECTION('',(0.,1.,0.)); +#204065 = DIRECTION('',(1.,0.,0.)); +#204066 = ADVANCED_FACE('',(#204067),#204092,.T.); +#204067 = FACE_BOUND('',#204068,.T.); +#204068 = EDGE_LOOP('',(#204069,#204070,#204078,#204086)); +#204069 = ORIENTED_EDGE('',*,*,#204048,.T.); +#204070 = ORIENTED_EDGE('',*,*,#204071,.T.); +#204071 = EDGE_CURVE('',#204041,#204072,#204074,.T.); +#204072 = VERTEX_POINT('',#204073); +#204073 = CARTESIAN_POINT('',(125.622836,-90.385195,1.545)); +#204074 = LINE('',#204075,#204076); +#204075 = CARTESIAN_POINT('',(125.618869,-90.4,1.545)); +#204076 = VECTOR('',#204077,1.); +#204077 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#204078 = ORIENTED_EDGE('',*,*,#204079,.F.); +#204079 = EDGE_CURVE('',#204080,#204072,#204082,.T.); +#204080 = VERTEX_POINT('',#204081); +#204081 = CARTESIAN_POINT('',(125.622836,-90.385195,1.51)); +#204082 = LINE('',#204083,#204084); +#204083 = CARTESIAN_POINT('',(125.622836,-90.385195,1.51)); +#204084 = VECTOR('',#204085,1.); +#204085 = DIRECTION('',(0.,0.,1.)); +#204086 = ORIENTED_EDGE('',*,*,#204087,.F.); +#204087 = EDGE_CURVE('',#204049,#204080,#204088,.T.); +#204088 = LINE('',#204089,#204090); +#204089 = CARTESIAN_POINT('',(125.618869,-90.4,1.51)); +#204090 = VECTOR('',#204091,1.); +#204091 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#204092 = PLANE('',#204093); +#204093 = AXIS2_PLACEMENT_3D('',#204094,#204095,#204096); +#204094 = CARTESIAN_POINT('',(125.618869,-90.4,1.51)); +#204095 = DIRECTION('',(-0.965925627198,0.258819788119,0.)); +#204096 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#204097 = ADVANCED_FACE('',(#204098),#204125,.T.); +#204098 = FACE_BOUND('',#204099,.T.); +#204099 = EDGE_LOOP('',(#204100,#204101,#204110,#204118)); +#204100 = ORIENTED_EDGE('',*,*,#204079,.T.); +#204101 = ORIENTED_EDGE('',*,*,#204102,.T.); +#204102 = EDGE_CURVE('',#204072,#204103,#204105,.T.); +#204103 = VERTEX_POINT('',#204104); +#204104 = CARTESIAN_POINT('',(125.622836,-90.614805,1.545)); +#204105 = CIRCLE('',#204106,0.299999850918); +#204106 = AXIS2_PLACEMENT_3D('',#204107,#204108,#204109); +#204107 = CARTESIAN_POINT('',(125.89999971069,-90.5,1.545)); +#204108 = DIRECTION('',(0.,0.,-1.)); +#204109 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#204110 = ORIENTED_EDGE('',*,*,#204111,.F.); +#204111 = EDGE_CURVE('',#204112,#204103,#204114,.T.); +#204112 = VERTEX_POINT('',#204113); +#204113 = CARTESIAN_POINT('',(125.622836,-90.614805,1.51)); +#204114 = LINE('',#204115,#204116); +#204115 = CARTESIAN_POINT('',(125.622836,-90.614805,1.51)); +#204116 = VECTOR('',#204117,1.); +#204117 = DIRECTION('',(0.,0.,1.)); +#204118 = ORIENTED_EDGE('',*,*,#204119,.F.); +#204119 = EDGE_CURVE('',#204080,#204112,#204120,.T.); +#204120 = CIRCLE('',#204121,0.299999850918); +#204121 = AXIS2_PLACEMENT_3D('',#204122,#204123,#204124); +#204122 = CARTESIAN_POINT('',(125.89999971069,-90.5,1.51)); +#204123 = DIRECTION('',(0.,0.,-1.)); +#204124 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#204125 = CYLINDRICAL_SURFACE('',#204126,0.299999850918); +#204126 = AXIS2_PLACEMENT_3D('',#204127,#204128,#204129); +#204127 = CARTESIAN_POINT('',(125.89999971069,-90.5,1.51)); +#204128 = DIRECTION('',(0.,0.,-1.)); +#204129 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#204130 = ADVANCED_FACE('',(#204131),#204156,.T.); +#204131 = FACE_BOUND('',#204132,.T.); +#204132 = EDGE_LOOP('',(#204133,#204134,#204142,#204150)); +#204133 = ORIENTED_EDGE('',*,*,#204111,.T.); +#204134 = ORIENTED_EDGE('',*,*,#204135,.T.); +#204135 = EDGE_CURVE('',#204103,#204136,#204138,.T.); +#204136 = VERTEX_POINT('',#204137); +#204137 = CARTESIAN_POINT('',(125.618869,-90.6,1.545)); +#204138 = LINE('',#204139,#204140); +#204139 = CARTESIAN_POINT('',(125.622836,-90.614805,1.545)); +#204140 = VECTOR('',#204141,1.); +#204141 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#204142 = ORIENTED_EDGE('',*,*,#204143,.F.); +#204143 = EDGE_CURVE('',#204144,#204136,#204146,.T.); +#204144 = VERTEX_POINT('',#204145); +#204145 = CARTESIAN_POINT('',(125.618869,-90.6,1.51)); +#204146 = LINE('',#204147,#204148); +#204147 = CARTESIAN_POINT('',(125.618869,-90.6,1.51)); +#204148 = VECTOR('',#204149,1.); +#204149 = DIRECTION('',(0.,0.,1.)); +#204150 = ORIENTED_EDGE('',*,*,#204151,.F.); +#204151 = EDGE_CURVE('',#204112,#204144,#204152,.T.); +#204152 = LINE('',#204153,#204154); +#204153 = CARTESIAN_POINT('',(125.622836,-90.614805,1.51)); +#204154 = VECTOR('',#204155,1.); +#204155 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#204156 = PLANE('',#204157); +#204157 = AXIS2_PLACEMENT_3D('',#204158,#204159,#204160); +#204158 = CARTESIAN_POINT('',(125.622836,-90.614805,1.51)); +#204159 = DIRECTION('',(-0.965925627198,-0.258819788119,0.)); +#204160 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#204161 = ADVANCED_FACE('',(#204162),#204187,.T.); +#204162 = FACE_BOUND('',#204163,.T.); +#204163 = EDGE_LOOP('',(#204164,#204165,#204173,#204181)); +#204164 = ORIENTED_EDGE('',*,*,#204143,.T.); +#204165 = ORIENTED_EDGE('',*,*,#204166,.T.); +#204166 = EDGE_CURVE('',#204136,#204167,#204169,.T.); +#204167 = VERTEX_POINT('',#204168); +#204168 = CARTESIAN_POINT('',(125.291421,-90.6,1.545)); +#204169 = LINE('',#204170,#204171); +#204170 = CARTESIAN_POINT('',(125.618869,-90.6,1.545)); +#204171 = VECTOR('',#204172,1.); +#204172 = DIRECTION('',(-1.,0.,0.)); +#204173 = ORIENTED_EDGE('',*,*,#204174,.F.); +#204174 = EDGE_CURVE('',#204175,#204167,#204177,.T.); +#204175 = VERTEX_POINT('',#204176); +#204176 = CARTESIAN_POINT('',(125.291421,-90.6,1.51)); +#204177 = LINE('',#204178,#204179); +#204178 = CARTESIAN_POINT('',(125.291421,-90.6,1.51)); +#204179 = VECTOR('',#204180,1.); +#204180 = DIRECTION('',(0.,0.,1.)); +#204181 = ORIENTED_EDGE('',*,*,#204182,.F.); +#204182 = EDGE_CURVE('',#204144,#204175,#204183,.T.); +#204183 = LINE('',#204184,#204185); +#204184 = CARTESIAN_POINT('',(125.618869,-90.6,1.51)); +#204185 = VECTOR('',#204186,1.); +#204186 = DIRECTION('',(-1.,0.,0.)); +#204187 = PLANE('',#204188); +#204188 = AXIS2_PLACEMENT_3D('',#204189,#204190,#204191); +#204189 = CARTESIAN_POINT('',(125.618869,-90.6,1.51)); +#204190 = DIRECTION('',(0.,-1.,0.)); +#204191 = DIRECTION('',(-1.,0.,0.)); +#204192 = ADVANCED_FACE('',(#204193),#204218,.T.); +#204193 = FACE_BOUND('',#204194,.T.); +#204194 = EDGE_LOOP('',(#204195,#204196,#204204,#204212)); +#204195 = ORIENTED_EDGE('',*,*,#204174,.T.); +#204196 = ORIENTED_EDGE('',*,*,#204197,.T.); +#204197 = EDGE_CURVE('',#204167,#204198,#204200,.T.); +#204198 = VERTEX_POINT('',#204199); +#204199 = CARTESIAN_POINT('',(124.080557,-91.808147,1.545)); +#204200 = LINE('',#204201,#204202); +#204201 = CARTESIAN_POINT('',(125.291421,-90.6,1.545)); +#204202 = VECTOR('',#204203,1.); +#204203 = DIRECTION('',(-0.707900547307,-0.706312123019,0.)); +#204204 = ORIENTED_EDGE('',*,*,#204205,.F.); +#204205 = EDGE_CURVE('',#204206,#204198,#204208,.T.); +#204206 = VERTEX_POINT('',#204207); +#204207 = CARTESIAN_POINT('',(124.080557,-91.808147,1.51)); +#204208 = LINE('',#204209,#204210); +#204209 = CARTESIAN_POINT('',(124.080557,-91.808147,1.51)); +#204210 = VECTOR('',#204211,1.); +#204211 = DIRECTION('',(0.,0.,1.)); +#204212 = ORIENTED_EDGE('',*,*,#204213,.F.); +#204213 = EDGE_CURVE('',#204175,#204206,#204214,.T.); +#204214 = LINE('',#204215,#204216); +#204215 = CARTESIAN_POINT('',(125.291421,-90.6,1.51)); +#204216 = VECTOR('',#204217,1.); +#204217 = DIRECTION('',(-0.707900547307,-0.706312123019,0.)); +#204218 = PLANE('',#204219); +#204219 = AXIS2_PLACEMENT_3D('',#204220,#204221,#204222); +#204220 = CARTESIAN_POINT('',(125.291421,-90.6,1.51)); +#204221 = DIRECTION('',(0.706312123019,-0.707900547307,0.)); +#204222 = DIRECTION('',(-0.707900547307,-0.706312123019,0.)); +#204223 = ADVANCED_FACE('',(#204224),#204249,.T.); +#204224 = FACE_BOUND('',#204225,.T.); +#204225 = EDGE_LOOP('',(#204226,#204227,#204235,#204243)); +#204226 = ORIENTED_EDGE('',*,*,#204205,.T.); +#204227 = ORIENTED_EDGE('',*,*,#204228,.T.); +#204228 = EDGE_CURVE('',#204198,#204229,#204231,.T.); +#204229 = VERTEX_POINT('',#204230); +#204230 = CARTESIAN_POINT('',(124.044509,-91.823079,1.545)); +#204231 = LINE('',#204232,#204233); +#204232 = CARTESIAN_POINT('',(124.080557,-91.808147,1.545)); +#204233 = VECTOR('',#204234,1.); +#204234 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#204235 = ORIENTED_EDGE('',*,*,#204236,.F.); +#204236 = EDGE_CURVE('',#204237,#204229,#204239,.T.); +#204237 = VERTEX_POINT('',#204238); +#204238 = CARTESIAN_POINT('',(124.044509,-91.823079,1.51)); +#204239 = LINE('',#204240,#204241); +#204240 = CARTESIAN_POINT('',(124.044509,-91.823079,1.51)); +#204241 = VECTOR('',#204242,1.); +#204242 = DIRECTION('',(0.,0.,1.)); +#204243 = ORIENTED_EDGE('',*,*,#204244,.F.); +#204244 = EDGE_CURVE('',#204206,#204237,#204245,.T.); +#204245 = LINE('',#204246,#204247); +#204246 = CARTESIAN_POINT('',(124.080557,-91.808147,1.51)); +#204247 = VECTOR('',#204248,1.); +#204248 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#204249 = PLANE('',#204250); +#204250 = AXIS2_PLACEMENT_3D('',#204251,#204252,#204253); +#204251 = CARTESIAN_POINT('',(124.080557,-91.808147,1.51)); +#204252 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#204253 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#204254 = ADVANCED_FACE('',(#204255),#204280,.T.); +#204255 = FACE_BOUND('',#204256,.T.); +#204256 = EDGE_LOOP('',(#204257,#204258,#204266,#204274)); +#204257 = ORIENTED_EDGE('',*,*,#204236,.T.); +#204258 = ORIENTED_EDGE('',*,*,#204259,.T.); +#204259 = EDGE_CURVE('',#204229,#204260,#204262,.T.); +#204260 = VERTEX_POINT('',#204261); +#204261 = CARTESIAN_POINT('',(122.630491,-91.823079,1.545)); +#204262 = LINE('',#204263,#204264); +#204263 = CARTESIAN_POINT('',(124.044509,-91.823079,1.545)); +#204264 = VECTOR('',#204265,1.); +#204265 = DIRECTION('',(-1.,0.,0.)); +#204266 = ORIENTED_EDGE('',*,*,#204267,.F.); +#204267 = EDGE_CURVE('',#204268,#204260,#204270,.T.); +#204268 = VERTEX_POINT('',#204269); +#204269 = CARTESIAN_POINT('',(122.630491,-91.823079,1.51)); +#204270 = LINE('',#204271,#204272); +#204271 = CARTESIAN_POINT('',(122.630491,-91.823079,1.51)); +#204272 = VECTOR('',#204273,1.); +#204273 = DIRECTION('',(0.,0.,1.)); +#204274 = ORIENTED_EDGE('',*,*,#204275,.F.); +#204275 = EDGE_CURVE('',#204237,#204268,#204276,.T.); +#204276 = LINE('',#204277,#204278); +#204277 = CARTESIAN_POINT('',(124.044509,-91.823079,1.51)); +#204278 = VECTOR('',#204279,1.); +#204279 = DIRECTION('',(-1.,0.,0.)); +#204280 = PLANE('',#204281); +#204281 = AXIS2_PLACEMENT_3D('',#204282,#204283,#204284); +#204282 = CARTESIAN_POINT('',(124.044509,-91.823079,1.51)); +#204283 = DIRECTION('',(0.,-1.,0.)); +#204284 = DIRECTION('',(-1.,0.,0.)); +#204285 = ADVANCED_FACE('',(#204286),#204313,.T.); +#204286 = FACE_BOUND('',#204287,.T.); +#204287 = EDGE_LOOP('',(#204288,#204289,#204298,#204306)); +#204288 = ORIENTED_EDGE('',*,*,#204267,.T.); +#204289 = ORIENTED_EDGE('',*,*,#204290,.T.); +#204290 = EDGE_CURVE('',#204260,#204291,#204293,.T.); +#204291 = VERTEX_POINT('',#204292); +#204292 = CARTESIAN_POINT('',(122.630491,-91.626921,1.545)); +#204293 = CIRCLE('',#204294,0.100000456609); +#204294 = AXIS2_PLACEMENT_3D('',#204295,#204296,#204297); +#204295 = CARTESIAN_POINT('',(122.65,-91.725,1.545)); +#204296 = DIRECTION('',(0.,0.,-1.)); +#204297 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#204298 = ORIENTED_EDGE('',*,*,#204299,.F.); +#204299 = EDGE_CURVE('',#204300,#204291,#204302,.T.); +#204300 = VERTEX_POINT('',#204301); +#204301 = CARTESIAN_POINT('',(122.630491,-91.626921,1.51)); +#204302 = LINE('',#204303,#204304); +#204303 = CARTESIAN_POINT('',(122.630491,-91.626921,1.51)); +#204304 = VECTOR('',#204305,1.); +#204305 = DIRECTION('',(0.,0.,1.)); +#204306 = ORIENTED_EDGE('',*,*,#204307,.F.); +#204307 = EDGE_CURVE('',#204268,#204300,#204308,.T.); +#204308 = CIRCLE('',#204309,0.100000456609); +#204309 = AXIS2_PLACEMENT_3D('',#204310,#204311,#204312); +#204310 = CARTESIAN_POINT('',(122.65,-91.725,1.51)); +#204311 = DIRECTION('',(0.,0.,-1.)); +#204312 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#204313 = CYLINDRICAL_SURFACE('',#204314,0.100000456609); +#204314 = AXIS2_PLACEMENT_3D('',#204315,#204316,#204317); +#204315 = CARTESIAN_POINT('',(122.65,-91.725,1.51)); +#204316 = DIRECTION('',(0.,0.,-1.)); +#204317 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#204318 = ADVANCED_FACE('',(#204319),#204344,.T.); +#204319 = FACE_BOUND('',#204320,.T.); +#204320 = EDGE_LOOP('',(#204321,#204322,#204330,#204338)); +#204321 = ORIENTED_EDGE('',*,*,#204299,.T.); +#204322 = ORIENTED_EDGE('',*,*,#204323,.T.); +#204323 = EDGE_CURVE('',#204291,#204324,#204326,.T.); +#204324 = VERTEX_POINT('',#204325); +#204325 = CARTESIAN_POINT('',(123.983578,-91.625,1.545)); +#204326 = LINE('',#204327,#204328); +#204327 = CARTESIAN_POINT('',(122.630491,-91.626921,1.545)); +#204328 = VECTOR('',#204329,1.); +#204329 = DIRECTION('',(0.999998992204,1.419715113677E-03,0.)); +#204330 = ORIENTED_EDGE('',*,*,#204331,.F.); +#204331 = EDGE_CURVE('',#204332,#204324,#204334,.T.); +#204332 = VERTEX_POINT('',#204333); +#204333 = CARTESIAN_POINT('',(123.983578,-91.625,1.51)); +#204334 = LINE('',#204335,#204336); +#204335 = CARTESIAN_POINT('',(123.983578,-91.625,1.51)); +#204336 = VECTOR('',#204337,1.); +#204337 = DIRECTION('',(0.,0.,1.)); +#204338 = ORIENTED_EDGE('',*,*,#204339,.F.); +#204339 = EDGE_CURVE('',#204300,#204332,#204340,.T.); +#204340 = LINE('',#204341,#204342); +#204341 = CARTESIAN_POINT('',(122.630491,-91.626921,1.51)); +#204342 = VECTOR('',#204343,1.); +#204343 = DIRECTION('',(0.999998992204,1.419715113677E-03,0.)); +#204344 = PLANE('',#204345); +#204345 = AXIS2_PLACEMENT_3D('',#204346,#204347,#204348); +#204346 = CARTESIAN_POINT('',(122.630491,-91.626921,1.51)); +#204347 = DIRECTION('',(-1.419715113677E-03,0.999998992204,0.)); +#204348 = DIRECTION('',(0.999998992204,1.419715113677E-03,0.)); +#204349 = ADVANCED_FACE('',(#204350),#204375,.T.); +#204350 = FACE_BOUND('',#204351,.T.); +#204351 = EDGE_LOOP('',(#204352,#204353,#204361,#204369)); +#204352 = ORIENTED_EDGE('',*,*,#204331,.T.); +#204353 = ORIENTED_EDGE('',*,*,#204354,.T.); +#204354 = EDGE_CURVE('',#204324,#204355,#204357,.T.); +#204355 = VERTEX_POINT('',#204356); +#204356 = CARTESIAN_POINT('',(125.108578,-90.5,1.545)); +#204357 = LINE('',#204358,#204359); +#204358 = CARTESIAN_POINT('',(123.983578,-91.625,1.545)); +#204359 = VECTOR('',#204360,1.); +#204360 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#204361 = ORIENTED_EDGE('',*,*,#204362,.F.); +#204362 = EDGE_CURVE('',#204363,#204355,#204365,.T.); +#204363 = VERTEX_POINT('',#204364); +#204364 = CARTESIAN_POINT('',(125.108578,-90.5,1.51)); +#204365 = LINE('',#204366,#204367); +#204366 = CARTESIAN_POINT('',(125.108578,-90.5,1.51)); +#204367 = VECTOR('',#204368,1.); +#204368 = DIRECTION('',(0.,0.,1.)); +#204369 = ORIENTED_EDGE('',*,*,#204370,.F.); +#204370 = EDGE_CURVE('',#204332,#204363,#204371,.T.); +#204371 = LINE('',#204372,#204373); +#204372 = CARTESIAN_POINT('',(123.983578,-91.625,1.51)); +#204373 = VECTOR('',#204374,1.); +#204374 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#204375 = PLANE('',#204376); +#204376 = AXIS2_PLACEMENT_3D('',#204377,#204378,#204379); +#204377 = CARTESIAN_POINT('',(123.983578,-91.625,1.51)); +#204378 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204379 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#204380 = ADVANCED_FACE('',(#204381),#204406,.T.); +#204381 = FACE_BOUND('',#204382,.T.); +#204382 = EDGE_LOOP('',(#204383,#204384,#204392,#204400)); +#204383 = ORIENTED_EDGE('',*,*,#204362,.T.); +#204384 = ORIENTED_EDGE('',*,*,#204385,.T.); +#204385 = EDGE_CURVE('',#204355,#204386,#204388,.T.); +#204386 = VERTEX_POINT('',#204387); +#204387 = CARTESIAN_POINT('',(123.983578,-89.375,1.545)); +#204388 = LINE('',#204389,#204390); +#204389 = CARTESIAN_POINT('',(125.108578,-90.5,1.545)); +#204390 = VECTOR('',#204391,1.); +#204391 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204392 = ORIENTED_EDGE('',*,*,#204393,.F.); +#204393 = EDGE_CURVE('',#204394,#204386,#204396,.T.); +#204394 = VERTEX_POINT('',#204395); +#204395 = CARTESIAN_POINT('',(123.983578,-89.375,1.51)); +#204396 = LINE('',#204397,#204398); +#204397 = CARTESIAN_POINT('',(123.983578,-89.375,1.51)); +#204398 = VECTOR('',#204399,1.); +#204399 = DIRECTION('',(0.,0.,1.)); +#204400 = ORIENTED_EDGE('',*,*,#204401,.F.); +#204401 = EDGE_CURVE('',#204363,#204394,#204402,.T.); +#204402 = LINE('',#204403,#204404); +#204403 = CARTESIAN_POINT('',(125.108578,-90.5,1.51)); +#204404 = VECTOR('',#204405,1.); +#204405 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204406 = PLANE('',#204407); +#204407 = AXIS2_PLACEMENT_3D('',#204408,#204409,#204410); +#204408 = CARTESIAN_POINT('',(125.108578,-90.5,1.51)); +#204409 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204410 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#204411 = ADVANCED_FACE('',(#204412),#204428,.T.); +#204412 = FACE_BOUND('',#204413,.T.); +#204413 = EDGE_LOOP('',(#204414,#204415,#204421,#204422)); +#204414 = ORIENTED_EDGE('',*,*,#204393,.T.); +#204415 = ORIENTED_EDGE('',*,*,#204416,.T.); +#204416 = EDGE_CURVE('',#204386,#203907,#204417,.T.); +#204417 = LINE('',#204418,#204419); +#204418 = CARTESIAN_POINT('',(123.983578,-89.375,1.545)); +#204419 = VECTOR('',#204420,1.); +#204420 = DIRECTION('',(-0.999998992204,1.419715113677E-03,0.)); +#204421 = ORIENTED_EDGE('',*,*,#203904,.F.); +#204422 = ORIENTED_EDGE('',*,*,#204423,.F.); +#204423 = EDGE_CURVE('',#204394,#203905,#204424,.T.); +#204424 = LINE('',#204425,#204426); +#204425 = CARTESIAN_POINT('',(123.983578,-89.375,1.51)); +#204426 = VECTOR('',#204427,1.); +#204427 = DIRECTION('',(-0.999998992204,1.419715113677E-03,0.)); +#204428 = PLANE('',#204429); +#204429 = AXIS2_PLACEMENT_3D('',#204430,#204431,#204432); +#204430 = CARTESIAN_POINT('',(123.983578,-89.375,1.51)); +#204431 = DIRECTION('',(-1.419715113677E-03,-0.999998992204,0.)); +#204432 = DIRECTION('',(-0.999998992204,1.419715113677E-03,0.)); +#204433 = ADVANCED_FACE('',(#204434),#204461,.F.); +#204434 = FACE_BOUND('',#204435,.T.); +#204435 = EDGE_LOOP('',(#204436,#204446,#204453,#204454)); +#204436 = ORIENTED_EDGE('',*,*,#204437,.T.); +#204437 = EDGE_CURVE('',#204438,#204440,#204442,.T.); +#204438 = VERTEX_POINT('',#204439); +#204439 = CARTESIAN_POINT('',(126.037255,-90.5,1.51)); +#204440 = VERTEX_POINT('',#204441); +#204441 = CARTESIAN_POINT('',(126.037255,-90.5,1.545)); +#204442 = LINE('',#204443,#204444); +#204443 = CARTESIAN_POINT('',(126.037255,-90.5,1.51)); +#204444 = VECTOR('',#204445,1.); +#204445 = DIRECTION('',(0.,0.,1.)); +#204446 = ORIENTED_EDGE('',*,*,#204447,.T.); +#204447 = EDGE_CURVE('',#204440,#204440,#204448,.T.); +#204448 = CIRCLE('',#204449,0.137255); +#204449 = AXIS2_PLACEMENT_3D('',#204450,#204451,#204452); +#204450 = CARTESIAN_POINT('',(125.9,-90.5,1.545)); +#204451 = DIRECTION('',(0.,0.,1.)); +#204452 = DIRECTION('',(1.,0.,-0.)); +#204453 = ORIENTED_EDGE('',*,*,#204437,.F.); +#204454 = ORIENTED_EDGE('',*,*,#204455,.F.); +#204455 = EDGE_CURVE('',#204438,#204438,#204456,.T.); +#204456 = CIRCLE('',#204457,0.137255); +#204457 = AXIS2_PLACEMENT_3D('',#204458,#204459,#204460); +#204458 = CARTESIAN_POINT('',(125.9,-90.5,1.51)); +#204459 = DIRECTION('',(0.,0.,1.)); +#204460 = DIRECTION('',(1.,0.,-0.)); +#204461 = CYLINDRICAL_SURFACE('',#204462,0.137255); +#204462 = AXIS2_PLACEMENT_3D('',#204463,#204464,#204465); +#204463 = CARTESIAN_POINT('',(125.9,-90.5,1.51)); +#204464 = DIRECTION('',(-0.,-0.,-1.)); +#204465 = DIRECTION('',(1.,0.,-0.)); +#204466 = ADVANCED_FACE('',(#204467,#204486),#204489,.F.); +#204467 = FACE_BOUND('',#204468,.T.); +#204468 = EDGE_LOOP('',(#204469,#204470,#204471,#204472,#204473,#204474, + #204475,#204476,#204477,#204478,#204479,#204480,#204481,#204482, + #204483,#204484,#204485)); +#204469 = ORIENTED_EDGE('',*,*,#203931,.T.); +#204470 = ORIENTED_EDGE('',*,*,#203963,.T.); +#204471 = ORIENTED_EDGE('',*,*,#203994,.T.); +#204472 = ORIENTED_EDGE('',*,*,#204025,.T.); +#204473 = ORIENTED_EDGE('',*,*,#204056,.T.); +#204474 = ORIENTED_EDGE('',*,*,#204087,.T.); +#204475 = ORIENTED_EDGE('',*,*,#204119,.T.); +#204476 = ORIENTED_EDGE('',*,*,#204151,.T.); +#204477 = ORIENTED_EDGE('',*,*,#204182,.T.); +#204478 = ORIENTED_EDGE('',*,*,#204213,.T.); +#204479 = ORIENTED_EDGE('',*,*,#204244,.T.); +#204480 = ORIENTED_EDGE('',*,*,#204275,.T.); +#204481 = ORIENTED_EDGE('',*,*,#204307,.T.); +#204482 = ORIENTED_EDGE('',*,*,#204339,.T.); +#204483 = ORIENTED_EDGE('',*,*,#204370,.T.); +#204484 = ORIENTED_EDGE('',*,*,#204401,.T.); +#204485 = ORIENTED_EDGE('',*,*,#204423,.T.); +#204486 = FACE_BOUND('',#204487,.T.); +#204487 = EDGE_LOOP('',(#204488)); +#204488 = ORIENTED_EDGE('',*,*,#204455,.T.); +#204489 = PLANE('',#204490); +#204490 = AXIS2_PLACEMENT_3D('',#204491,#204492,#204493); +#204491 = CARTESIAN_POINT('',(0.,0.,1.51)); +#204492 = DIRECTION('',(0.,0.,1.)); +#204493 = DIRECTION('',(1.,0.,-0.)); +#204494 = ADVANCED_FACE('',(#204495,#204514),#204517,.T.); +#204495 = FACE_BOUND('',#204496,.F.); +#204496 = EDGE_LOOP('',(#204497,#204498,#204499,#204500,#204501,#204502, + #204503,#204504,#204505,#204506,#204507,#204508,#204509,#204510, + #204511,#204512,#204513)); +#204497 = ORIENTED_EDGE('',*,*,#203914,.T.); +#204498 = ORIENTED_EDGE('',*,*,#203947,.T.); +#204499 = ORIENTED_EDGE('',*,*,#203978,.T.); +#204500 = ORIENTED_EDGE('',*,*,#204009,.T.); +#204501 = ORIENTED_EDGE('',*,*,#204040,.T.); +#204502 = ORIENTED_EDGE('',*,*,#204071,.T.); +#204503 = ORIENTED_EDGE('',*,*,#204102,.T.); +#204504 = ORIENTED_EDGE('',*,*,#204135,.T.); +#204505 = ORIENTED_EDGE('',*,*,#204166,.T.); +#204506 = ORIENTED_EDGE('',*,*,#204197,.T.); +#204507 = ORIENTED_EDGE('',*,*,#204228,.T.); +#204508 = ORIENTED_EDGE('',*,*,#204259,.T.); +#204509 = ORIENTED_EDGE('',*,*,#204290,.T.); +#204510 = ORIENTED_EDGE('',*,*,#204323,.T.); +#204511 = ORIENTED_EDGE('',*,*,#204354,.T.); +#204512 = ORIENTED_EDGE('',*,*,#204385,.T.); +#204513 = ORIENTED_EDGE('',*,*,#204416,.T.); +#204514 = FACE_BOUND('',#204515,.F.); +#204515 = EDGE_LOOP('',(#204516)); +#204516 = ORIENTED_EDGE('',*,*,#204447,.T.); +#204517 = PLANE('',#204518); +#204518 = AXIS2_PLACEMENT_3D('',#204519,#204520,#204521); +#204519 = CARTESIAN_POINT('',(0.,0.,1.545)); +#204520 = DIRECTION('',(0.,0.,1.)); +#204521 = DIRECTION('',(1.,0.,-0.)); +#204522 = MANIFOLD_SOLID_BREP('',#204523); +#204523 = CLOSED_SHELL('',(#204524,#204564,#204595,#204628,#204659, + #204690,#204721,#204754,#204785,#204807,#204840,#204860)); +#204524 = ADVANCED_FACE('',(#204525),#204559,.T.); +#204525 = FACE_BOUND('',#204526,.T.); +#204526 = EDGE_LOOP('',(#204527,#204537,#204545,#204553)); +#204527 = ORIENTED_EDGE('',*,*,#204528,.T.); +#204528 = EDGE_CURVE('',#204529,#204531,#204533,.T.); +#204529 = VERTEX_POINT('',#204530); +#204530 = CARTESIAN_POINT('',(128.634442,-74.726853,1.51)); +#204531 = VERTEX_POINT('',#204532); +#204532 = CARTESIAN_POINT('',(128.634442,-74.726853,1.545)); +#204533 = LINE('',#204534,#204535); +#204534 = CARTESIAN_POINT('',(128.634442,-74.726853,1.51)); +#204535 = VECTOR('',#204536,1.); +#204536 = DIRECTION('',(0.,0.,1.)); +#204537 = ORIENTED_EDGE('',*,*,#204538,.T.); +#204538 = EDGE_CURVE('',#204531,#204539,#204541,.T.); +#204539 = VERTEX_POINT('',#204540); +#204540 = CARTESIAN_POINT('',(128.670491,-74.711921,1.545)); +#204541 = LINE('',#204542,#204543); +#204542 = CARTESIAN_POINT('',(128.634442,-74.726853,1.545)); +#204543 = VECTOR('',#204544,1.); +#204544 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#204545 = ORIENTED_EDGE('',*,*,#204546,.F.); +#204546 = EDGE_CURVE('',#204547,#204539,#204549,.T.); +#204547 = VERTEX_POINT('',#204548); +#204548 = CARTESIAN_POINT('',(128.670491,-74.711921,1.51)); +#204549 = LINE('',#204550,#204551); +#204550 = CARTESIAN_POINT('',(128.670491,-74.711921,1.51)); +#204551 = VECTOR('',#204552,1.); +#204552 = DIRECTION('',(0.,0.,1.)); +#204553 = ORIENTED_EDGE('',*,*,#204554,.F.); +#204554 = EDGE_CURVE('',#204529,#204547,#204555,.T.); +#204555 = LINE('',#204556,#204557); +#204556 = CARTESIAN_POINT('',(128.634442,-74.726853,1.51)); +#204557 = VECTOR('',#204558,1.); +#204558 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#204559 = PLANE('',#204560); +#204560 = AXIS2_PLACEMENT_3D('',#204561,#204562,#204563); +#204561 = CARTESIAN_POINT('',(128.634442,-74.726853,1.51)); +#204562 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#204563 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#204564 = ADVANCED_FACE('',(#204565),#204590,.T.); +#204565 = FACE_BOUND('',#204566,.T.); +#204566 = EDGE_LOOP('',(#204567,#204568,#204576,#204584)); +#204567 = ORIENTED_EDGE('',*,*,#204546,.T.); +#204568 = ORIENTED_EDGE('',*,*,#204569,.T.); +#204569 = EDGE_CURVE('',#204539,#204570,#204572,.T.); +#204570 = VERTEX_POINT('',#204571); +#204571 = CARTESIAN_POINT('',(129.269509,-74.711921,1.545)); +#204572 = LINE('',#204573,#204574); +#204573 = CARTESIAN_POINT('',(128.670491,-74.711921,1.545)); +#204574 = VECTOR('',#204575,1.); +#204575 = DIRECTION('',(1.,0.,0.)); +#204576 = ORIENTED_EDGE('',*,*,#204577,.F.); +#204577 = EDGE_CURVE('',#204578,#204570,#204580,.T.); +#204578 = VERTEX_POINT('',#204579); +#204579 = CARTESIAN_POINT('',(129.269509,-74.711921,1.51)); +#204580 = LINE('',#204581,#204582); +#204581 = CARTESIAN_POINT('',(129.269509,-74.711921,1.51)); +#204582 = VECTOR('',#204583,1.); +#204583 = DIRECTION('',(0.,0.,1.)); +#204584 = ORIENTED_EDGE('',*,*,#204585,.F.); +#204585 = EDGE_CURVE('',#204547,#204578,#204586,.T.); +#204586 = LINE('',#204587,#204588); +#204587 = CARTESIAN_POINT('',(128.670491,-74.711921,1.51)); +#204588 = VECTOR('',#204589,1.); +#204589 = DIRECTION('',(1.,0.,0.)); +#204590 = PLANE('',#204591); +#204591 = AXIS2_PLACEMENT_3D('',#204592,#204593,#204594); +#204592 = CARTESIAN_POINT('',(128.670491,-74.711921,1.51)); +#204593 = DIRECTION('',(0.,1.,0.)); +#204594 = DIRECTION('',(1.,0.,0.)); +#204595 = ADVANCED_FACE('',(#204596),#204623,.T.); +#204596 = FACE_BOUND('',#204597,.T.); +#204597 = EDGE_LOOP('',(#204598,#204599,#204608,#204616)); +#204598 = ORIENTED_EDGE('',*,*,#204577,.T.); +#204599 = ORIENTED_EDGE('',*,*,#204600,.T.); +#204600 = EDGE_CURVE('',#204570,#204601,#204603,.T.); +#204601 = VERTEX_POINT('',#204602); +#204602 = CARTESIAN_POINT('',(129.269509,-74.908079,1.545)); +#204603 = CIRCLE('',#204604,0.100000456609); +#204604 = AXIS2_PLACEMENT_3D('',#204605,#204606,#204607); +#204605 = CARTESIAN_POINT('',(129.25,-74.81,1.545)); +#204606 = DIRECTION('',(0.,0.,-1.)); +#204607 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#204608 = ORIENTED_EDGE('',*,*,#204609,.F.); +#204609 = EDGE_CURVE('',#204610,#204601,#204612,.T.); +#204610 = VERTEX_POINT('',#204611); +#204611 = CARTESIAN_POINT('',(129.269509,-74.908079,1.51)); +#204612 = LINE('',#204613,#204614); +#204613 = CARTESIAN_POINT('',(129.269509,-74.908079,1.51)); +#204614 = VECTOR('',#204615,1.); +#204615 = DIRECTION('',(0.,0.,1.)); +#204616 = ORIENTED_EDGE('',*,*,#204617,.F.); +#204617 = EDGE_CURVE('',#204578,#204610,#204618,.T.); +#204618 = CIRCLE('',#204619,0.100000456609); +#204619 = AXIS2_PLACEMENT_3D('',#204620,#204621,#204622); +#204620 = CARTESIAN_POINT('',(129.25,-74.81,1.51)); +#204621 = DIRECTION('',(0.,0.,-1.)); +#204622 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#204623 = CYLINDRICAL_SURFACE('',#204624,0.100000456609); +#204624 = AXIS2_PLACEMENT_3D('',#204625,#204626,#204627); +#204625 = CARTESIAN_POINT('',(129.25,-74.81,1.51)); +#204626 = DIRECTION('',(0.,0.,-1.)); +#204627 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#204628 = ADVANCED_FACE('',(#204629),#204654,.T.); +#204629 = FACE_BOUND('',#204630,.T.); +#204630 = EDGE_LOOP('',(#204631,#204632,#204640,#204648)); +#204631 = ORIENTED_EDGE('',*,*,#204609,.T.); +#204632 = ORIENTED_EDGE('',*,*,#204633,.T.); +#204633 = EDGE_CURVE('',#204601,#204634,#204636,.T.); +#204634 = VERTEX_POINT('',#204635); +#204635 = CARTESIAN_POINT('',(128.731421,-74.91,1.545)); +#204636 = LINE('',#204637,#204638); +#204637 = CARTESIAN_POINT('',(129.269509,-74.908079,1.545)); +#204638 = VECTOR('',#204639,1.); +#204639 = DIRECTION('',(-0.999993627439,-3.57002527153E-03,0.)); +#204640 = ORIENTED_EDGE('',*,*,#204641,.F.); +#204641 = EDGE_CURVE('',#204642,#204634,#204644,.T.); +#204642 = VERTEX_POINT('',#204643); +#204643 = CARTESIAN_POINT('',(128.731421,-74.91,1.51)); +#204644 = LINE('',#204645,#204646); +#204645 = CARTESIAN_POINT('',(128.731421,-74.91,1.51)); +#204646 = VECTOR('',#204647,1.); +#204647 = DIRECTION('',(0.,0.,1.)); +#204648 = ORIENTED_EDGE('',*,*,#204649,.F.); +#204649 = EDGE_CURVE('',#204610,#204642,#204650,.T.); +#204650 = LINE('',#204651,#204652); +#204651 = CARTESIAN_POINT('',(129.269509,-74.908079,1.51)); +#204652 = VECTOR('',#204653,1.); +#204653 = DIRECTION('',(-0.999993627439,-3.57002527153E-03,0.)); +#204654 = PLANE('',#204655); +#204655 = AXIS2_PLACEMENT_3D('',#204656,#204657,#204658); +#204656 = CARTESIAN_POINT('',(129.269509,-74.908079,1.51)); +#204657 = DIRECTION('',(3.57002527153E-03,-0.999993627439,0.)); +#204658 = DIRECTION('',(-0.999993627439,-3.57002527153E-03,0.)); +#204659 = ADVANCED_FACE('',(#204660),#204685,.T.); +#204660 = FACE_BOUND('',#204661,.T.); +#204661 = EDGE_LOOP('',(#204662,#204663,#204671,#204679)); +#204662 = ORIENTED_EDGE('',*,*,#204641,.T.); +#204663 = ORIENTED_EDGE('',*,*,#204664,.T.); +#204664 = EDGE_CURVE('',#204634,#204665,#204667,.T.); +#204665 = VERTEX_POINT('',#204666); +#204666 = CARTESIAN_POINT('',(128.2695,-75.371921,1.545)); +#204667 = LINE('',#204668,#204669); +#204668 = CARTESIAN_POINT('',(128.731421,-74.91,1.545)); +#204669 = VECTOR('',#204670,1.); +#204670 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204671 = ORIENTED_EDGE('',*,*,#204672,.F.); +#204672 = EDGE_CURVE('',#204673,#204665,#204675,.T.); +#204673 = VERTEX_POINT('',#204674); +#204674 = CARTESIAN_POINT('',(128.2695,-75.371921,1.51)); +#204675 = LINE('',#204676,#204677); +#204676 = CARTESIAN_POINT('',(128.2695,-75.371921,1.51)); +#204677 = VECTOR('',#204678,1.); +#204678 = DIRECTION('',(0.,0.,1.)); +#204679 = ORIENTED_EDGE('',*,*,#204680,.F.); +#204680 = EDGE_CURVE('',#204642,#204673,#204681,.T.); +#204681 = LINE('',#204682,#204683); +#204682 = CARTESIAN_POINT('',(128.731421,-74.91,1.51)); +#204683 = VECTOR('',#204684,1.); +#204684 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204685 = PLANE('',#204686); +#204686 = AXIS2_PLACEMENT_3D('',#204687,#204688,#204689); +#204687 = CARTESIAN_POINT('',(128.731421,-74.91,1.51)); +#204688 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#204689 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#204690 = ADVANCED_FACE('',(#204691),#204716,.T.); +#204691 = FACE_BOUND('',#204692,.T.); +#204692 = EDGE_LOOP('',(#204693,#204694,#204702,#204710)); +#204693 = ORIENTED_EDGE('',*,*,#204672,.T.); +#204694 = ORIENTED_EDGE('',*,*,#204695,.T.); +#204695 = EDGE_CURVE('',#204665,#204696,#204698,.T.); +#204696 = VERTEX_POINT('',#204697); +#204697 = CARTESIAN_POINT('',(128.277164,-75.385195,1.545)); +#204698 = LINE('',#204699,#204700); +#204699 = CARTESIAN_POINT('',(128.2695,-75.371921,1.545)); +#204700 = VECTOR('',#204701,1.); +#204701 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#204702 = ORIENTED_EDGE('',*,*,#204703,.F.); +#204703 = EDGE_CURVE('',#204704,#204696,#204706,.T.); +#204704 = VERTEX_POINT('',#204705); +#204705 = CARTESIAN_POINT('',(128.277164,-75.385195,1.51)); +#204706 = LINE('',#204707,#204708); +#204707 = CARTESIAN_POINT('',(128.277164,-75.385195,1.51)); +#204708 = VECTOR('',#204709,1.); +#204709 = DIRECTION('',(0.,0.,1.)); +#204710 = ORIENTED_EDGE('',*,*,#204711,.F.); +#204711 = EDGE_CURVE('',#204673,#204704,#204712,.T.); +#204712 = LINE('',#204713,#204714); +#204713 = CARTESIAN_POINT('',(128.2695,-75.371921,1.51)); +#204714 = VECTOR('',#204715,1.); +#204715 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#204716 = PLANE('',#204717); +#204717 = AXIS2_PLACEMENT_3D('',#204718,#204719,#204720); +#204718 = CARTESIAN_POINT('',(128.2695,-75.371921,1.51)); +#204719 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#204720 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#204721 = ADVANCED_FACE('',(#204722),#204749,.T.); +#204722 = FACE_BOUND('',#204723,.T.); +#204723 = EDGE_LOOP('',(#204724,#204725,#204734,#204742)); +#204724 = ORIENTED_EDGE('',*,*,#204703,.T.); +#204725 = ORIENTED_EDGE('',*,*,#204726,.T.); +#204726 = EDGE_CURVE('',#204696,#204727,#204729,.T.); +#204727 = VERTEX_POINT('',#204728); +#204728 = CARTESIAN_POINT('',(128.114805,-75.222836,1.545)); +#204729 = CIRCLE('',#204730,0.299999934501); +#204730 = AXIS2_PLACEMENT_3D('',#204731,#204732,#204733); +#204731 = CARTESIAN_POINT('',(128.00000014059,-75.4999998594,1.545)); +#204732 = DIRECTION('',(0.,0.,-1.)); +#204733 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#204734 = ORIENTED_EDGE('',*,*,#204735,.F.); +#204735 = EDGE_CURVE('',#204736,#204727,#204738,.T.); +#204736 = VERTEX_POINT('',#204737); +#204737 = CARTESIAN_POINT('',(128.114805,-75.222836,1.51)); +#204738 = LINE('',#204739,#204740); +#204739 = CARTESIAN_POINT('',(128.114805,-75.222836,1.51)); +#204740 = VECTOR('',#204741,1.); +#204741 = DIRECTION('',(0.,0.,1.)); +#204742 = ORIENTED_EDGE('',*,*,#204743,.F.); +#204743 = EDGE_CURVE('',#204704,#204736,#204744,.T.); +#204744 = CIRCLE('',#204745,0.299999934501); +#204745 = AXIS2_PLACEMENT_3D('',#204746,#204747,#204748); +#204746 = CARTESIAN_POINT('',(128.00000014059,-75.4999998594,1.51)); +#204747 = DIRECTION('',(0.,0.,-1.)); +#204748 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#204749 = CYLINDRICAL_SURFACE('',#204750,0.299999934501); +#204750 = AXIS2_PLACEMENT_3D('',#204751,#204752,#204753); +#204751 = CARTESIAN_POINT('',(128.00000014059,-75.4999998594,1.51)); +#204752 = DIRECTION('',(0.,0.,-1.)); +#204753 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#204754 = ADVANCED_FACE('',(#204755),#204780,.T.); +#204755 = FACE_BOUND('',#204756,.T.); +#204756 = EDGE_LOOP('',(#204757,#204758,#204766,#204774)); +#204757 = ORIENTED_EDGE('',*,*,#204735,.T.); +#204758 = ORIENTED_EDGE('',*,*,#204759,.T.); +#204759 = EDGE_CURVE('',#204727,#204760,#204762,.T.); +#204760 = VERTEX_POINT('',#204761); +#204761 = CARTESIAN_POINT('',(128.128078,-75.230499,1.545)); +#204762 = LINE('',#204763,#204764); +#204763 = CARTESIAN_POINT('',(128.114805,-75.222836,1.545)); +#204764 = VECTOR('',#204765,1.); +#204765 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#204766 = ORIENTED_EDGE('',*,*,#204767,.F.); +#204767 = EDGE_CURVE('',#204768,#204760,#204770,.T.); +#204768 = VERTEX_POINT('',#204769); +#204769 = CARTESIAN_POINT('',(128.128078,-75.230499,1.51)); +#204770 = LINE('',#204771,#204772); +#204771 = CARTESIAN_POINT('',(128.128078,-75.230499,1.51)); +#204772 = VECTOR('',#204773,1.); +#204773 = DIRECTION('',(0.,0.,1.)); +#204774 = ORIENTED_EDGE('',*,*,#204775,.F.); +#204775 = EDGE_CURVE('',#204736,#204768,#204776,.T.); +#204776 = LINE('',#204777,#204778); +#204777 = CARTESIAN_POINT('',(128.114805,-75.222836,1.51)); +#204778 = VECTOR('',#204779,1.); +#204779 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#204780 = PLANE('',#204781); +#204781 = AXIS2_PLACEMENT_3D('',#204782,#204783,#204784); +#204782 = CARTESIAN_POINT('',(128.114805,-75.222836,1.51)); +#204783 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#204784 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#204785 = ADVANCED_FACE('',(#204786),#204802,.T.); +#204786 = FACE_BOUND('',#204787,.T.); +#204787 = EDGE_LOOP('',(#204788,#204789,#204795,#204796)); +#204788 = ORIENTED_EDGE('',*,*,#204767,.T.); +#204789 = ORIENTED_EDGE('',*,*,#204790,.T.); +#204790 = EDGE_CURVE('',#204760,#204531,#204791,.T.); +#204791 = LINE('',#204792,#204793); +#204792 = CARTESIAN_POINT('',(128.128078,-75.230499,1.545)); +#204793 = VECTOR('',#204794,1.); +#204794 = DIRECTION('',(0.709007082459,0.705201359204,0.)); +#204795 = ORIENTED_EDGE('',*,*,#204528,.F.); +#204796 = ORIENTED_EDGE('',*,*,#204797,.F.); +#204797 = EDGE_CURVE('',#204768,#204529,#204798,.T.); +#204798 = LINE('',#204799,#204800); +#204799 = CARTESIAN_POINT('',(128.128078,-75.230499,1.51)); +#204800 = VECTOR('',#204801,1.); +#204801 = DIRECTION('',(0.709007082459,0.705201359204,0.)); +#204802 = PLANE('',#204803); +#204803 = AXIS2_PLACEMENT_3D('',#204804,#204805,#204806); +#204804 = CARTESIAN_POINT('',(128.128078,-75.230499,1.51)); +#204805 = DIRECTION('',(-0.705201359204,0.709007082459,0.)); +#204806 = DIRECTION('',(0.709007082459,0.705201359204,0.)); +#204807 = ADVANCED_FACE('',(#204808),#204835,.F.); +#204808 = FACE_BOUND('',#204809,.T.); +#204809 = EDGE_LOOP('',(#204810,#204820,#204827,#204828)); +#204810 = ORIENTED_EDGE('',*,*,#204811,.T.); +#204811 = EDGE_CURVE('',#204812,#204814,#204816,.T.); +#204812 = VERTEX_POINT('',#204813); +#204813 = CARTESIAN_POINT('',(128.137255,-75.5,1.51)); +#204814 = VERTEX_POINT('',#204815); +#204815 = CARTESIAN_POINT('',(128.137255,-75.5,1.545)); +#204816 = LINE('',#204817,#204818); +#204817 = CARTESIAN_POINT('',(128.137255,-75.5,1.51)); +#204818 = VECTOR('',#204819,1.); +#204819 = DIRECTION('',(0.,0.,1.)); +#204820 = ORIENTED_EDGE('',*,*,#204821,.T.); +#204821 = EDGE_CURVE('',#204814,#204814,#204822,.T.); +#204822 = CIRCLE('',#204823,0.137255); +#204823 = AXIS2_PLACEMENT_3D('',#204824,#204825,#204826); +#204824 = CARTESIAN_POINT('',(128.,-75.5,1.545)); +#204825 = DIRECTION('',(0.,0.,1.)); +#204826 = DIRECTION('',(1.,0.,-0.)); +#204827 = ORIENTED_EDGE('',*,*,#204811,.F.); +#204828 = ORIENTED_EDGE('',*,*,#204829,.F.); +#204829 = EDGE_CURVE('',#204812,#204812,#204830,.T.); +#204830 = CIRCLE('',#204831,0.137255); +#204831 = AXIS2_PLACEMENT_3D('',#204832,#204833,#204834); +#204832 = CARTESIAN_POINT('',(128.,-75.5,1.51)); +#204833 = DIRECTION('',(0.,0.,1.)); +#204834 = DIRECTION('',(1.,0.,-0.)); +#204835 = CYLINDRICAL_SURFACE('',#204836,0.137255); +#204836 = AXIS2_PLACEMENT_3D('',#204837,#204838,#204839); +#204837 = CARTESIAN_POINT('',(128.,-75.5,1.51)); +#204838 = DIRECTION('',(-0.,-0.,-1.)); +#204839 = DIRECTION('',(1.,0.,-0.)); +#204840 = ADVANCED_FACE('',(#204841,#204852),#204855,.F.); +#204841 = FACE_BOUND('',#204842,.T.); +#204842 = EDGE_LOOP('',(#204843,#204844,#204845,#204846,#204847,#204848, + #204849,#204850,#204851)); +#204843 = ORIENTED_EDGE('',*,*,#204554,.T.); +#204844 = ORIENTED_EDGE('',*,*,#204585,.T.); +#204845 = ORIENTED_EDGE('',*,*,#204617,.T.); +#204846 = ORIENTED_EDGE('',*,*,#204649,.T.); +#204847 = ORIENTED_EDGE('',*,*,#204680,.T.); +#204848 = ORIENTED_EDGE('',*,*,#204711,.T.); +#204849 = ORIENTED_EDGE('',*,*,#204743,.T.); +#204850 = ORIENTED_EDGE('',*,*,#204775,.T.); +#204851 = ORIENTED_EDGE('',*,*,#204797,.T.); +#204852 = FACE_BOUND('',#204853,.T.); +#204853 = EDGE_LOOP('',(#204854)); +#204854 = ORIENTED_EDGE('',*,*,#204829,.T.); +#204855 = PLANE('',#204856); +#204856 = AXIS2_PLACEMENT_3D('',#204857,#204858,#204859); +#204857 = CARTESIAN_POINT('',(0.,0.,1.51)); +#204858 = DIRECTION('',(0.,0.,1.)); +#204859 = DIRECTION('',(1.,0.,-0.)); +#204860 = ADVANCED_FACE('',(#204861,#204872),#204875,.T.); +#204861 = FACE_BOUND('',#204862,.F.); +#204862 = EDGE_LOOP('',(#204863,#204864,#204865,#204866,#204867,#204868, + #204869,#204870,#204871)); +#204863 = ORIENTED_EDGE('',*,*,#204538,.T.); +#204864 = ORIENTED_EDGE('',*,*,#204569,.T.); +#204865 = ORIENTED_EDGE('',*,*,#204600,.T.); +#204866 = ORIENTED_EDGE('',*,*,#204633,.T.); +#204867 = ORIENTED_EDGE('',*,*,#204664,.T.); +#204868 = ORIENTED_EDGE('',*,*,#204695,.T.); +#204869 = ORIENTED_EDGE('',*,*,#204726,.T.); +#204870 = ORIENTED_EDGE('',*,*,#204759,.T.); +#204871 = ORIENTED_EDGE('',*,*,#204790,.T.); +#204872 = FACE_BOUND('',#204873,.F.); +#204873 = EDGE_LOOP('',(#204874)); +#204874 = ORIENTED_EDGE('',*,*,#204821,.T.); +#204875 = PLANE('',#204876); +#204876 = AXIS2_PLACEMENT_3D('',#204877,#204878,#204879); +#204877 = CARTESIAN_POINT('',(0.,0.,1.545)); +#204878 = DIRECTION('',(0.,0.,1.)); +#204879 = DIRECTION('',(1.,0.,-0.)); +#204880 = MANIFOLD_SOLID_BREP('',#204881); +#204881 = CLOSED_SHELL('',(#204882,#204922,#204953,#204984,#205015, + #205046,#205077,#205110,#205141,#205172,#205203,#205234,#205265, + #205296,#205327,#205358,#205391,#205413,#205446,#205479,#205510)); +#204882 = ADVANCED_FACE('',(#204883),#204917,.F.); +#204883 = FACE_BOUND('',#204884,.F.); +#204884 = EDGE_LOOP('',(#204885,#204895,#204903,#204911)); +#204885 = ORIENTED_EDGE('',*,*,#204886,.T.); +#204886 = EDGE_CURVE('',#204887,#204889,#204891,.T.); +#204887 = VERTEX_POINT('',#204888); +#204888 = CARTESIAN_POINT('',(127.871921,-75.7695,0.)); +#204889 = VERTEX_POINT('',#204890); +#204890 = CARTESIAN_POINT('',(127.871921,-75.7695,-3.5E-02)); +#204891 = LINE('',#204892,#204893); +#204892 = CARTESIAN_POINT('',(127.871921,-75.7695,0.)); +#204893 = VECTOR('',#204894,1.); +#204894 = DIRECTION('',(0.,0.,-1.)); +#204895 = ORIENTED_EDGE('',*,*,#204896,.T.); +#204896 = EDGE_CURVE('',#204889,#204897,#204899,.T.); +#204897 = VERTEX_POINT('',#204898); +#204898 = CARTESIAN_POINT('',(127.458949,-76.182473,-3.5E-02)); +#204899 = LINE('',#204900,#204901); +#204900 = CARTESIAN_POINT('',(127.871921,-75.7695,-3.5E-02)); +#204901 = VECTOR('',#204902,1.); +#204902 = DIRECTION('',(-0.707105925068,-0.707107637305,0.)); +#204903 = ORIENTED_EDGE('',*,*,#204904,.F.); +#204904 = EDGE_CURVE('',#204905,#204897,#204907,.T.); +#204905 = VERTEX_POINT('',#204906); +#204906 = CARTESIAN_POINT('',(127.458949,-76.182473,0.)); +#204907 = LINE('',#204908,#204909); +#204908 = CARTESIAN_POINT('',(127.458949,-76.182473,0.)); +#204909 = VECTOR('',#204910,1.); +#204910 = DIRECTION('',(0.,0.,-1.)); +#204911 = ORIENTED_EDGE('',*,*,#204912,.F.); +#204912 = EDGE_CURVE('',#204887,#204905,#204913,.T.); +#204913 = LINE('',#204914,#204915); +#204914 = CARTESIAN_POINT('',(127.871921,-75.7695,0.)); +#204915 = VECTOR('',#204916,1.); +#204916 = DIRECTION('',(-0.707105925068,-0.707107637305,0.)); +#204917 = PLANE('',#204918); +#204918 = AXIS2_PLACEMENT_3D('',#204919,#204920,#204921); +#204919 = CARTESIAN_POINT('',(127.871921,-75.7695,0.)); +#204920 = DIRECTION('',(-0.707107637305,0.707105925068,0.)); +#204921 = DIRECTION('',(-0.707105925068,-0.707107637305,0.)); +#204922 = ADVANCED_FACE('',(#204923),#204948,.F.); +#204923 = FACE_BOUND('',#204924,.F.); +#204924 = EDGE_LOOP('',(#204925,#204926,#204934,#204942)); +#204925 = ORIENTED_EDGE('',*,*,#204904,.T.); +#204926 = ORIENTED_EDGE('',*,*,#204927,.T.); +#204927 = EDGE_CURVE('',#204897,#204928,#204930,.T.); +#204928 = VERTEX_POINT('',#204929); +#204929 = CARTESIAN_POINT('',(127.457028,-88.41056,-3.5E-02)); +#204930 = LINE('',#204931,#204932); +#204931 = CARTESIAN_POINT('',(127.458949,-76.182473,-3.5E-02)); +#204932 = VECTOR('',#204933,1.); +#204933 = DIRECTION('',(-1.570973428882E-04,-0.99999998766,0.)); +#204934 = ORIENTED_EDGE('',*,*,#204935,.F.); +#204935 = EDGE_CURVE('',#204936,#204928,#204938,.T.); +#204936 = VERTEX_POINT('',#204937); +#204937 = CARTESIAN_POINT('',(127.457028,-88.41056,0.)); +#204938 = LINE('',#204939,#204940); +#204939 = CARTESIAN_POINT('',(127.457028,-88.41056,0.)); +#204940 = VECTOR('',#204941,1.); +#204941 = DIRECTION('',(0.,0.,-1.)); +#204942 = ORIENTED_EDGE('',*,*,#204943,.F.); +#204943 = EDGE_CURVE('',#204905,#204936,#204944,.T.); +#204944 = LINE('',#204945,#204946); +#204945 = CARTESIAN_POINT('',(127.458949,-76.182473,0.)); +#204946 = VECTOR('',#204947,1.); +#204947 = DIRECTION('',(-1.570973428882E-04,-0.99999998766,0.)); +#204948 = PLANE('',#204949); +#204949 = AXIS2_PLACEMENT_3D('',#204950,#204951,#204952); +#204950 = CARTESIAN_POINT('',(127.458949,-76.182473,0.)); +#204951 = DIRECTION('',(-0.99999998766,1.570973428882E-04,0.)); +#204952 = DIRECTION('',(-1.570973428882E-04,-0.99999998766,0.)); +#204953 = ADVANCED_FACE('',(#204954),#204979,.F.); +#204954 = FACE_BOUND('',#204955,.F.); +#204955 = EDGE_LOOP('',(#204956,#204957,#204965,#204973)); +#204956 = ORIENTED_EDGE('',*,*,#204935,.T.); +#204957 = ORIENTED_EDGE('',*,*,#204958,.T.); +#204958 = EDGE_CURVE('',#204928,#204959,#204961,.T.); +#204959 = VERTEX_POINT('',#204960); +#204960 = CARTESIAN_POINT('',(127.442096,-88.446609,-3.5E-02)); +#204961 = LINE('',#204962,#204963); +#204962 = CARTESIAN_POINT('',(127.457028,-88.41056,-3.5E-02)); +#204963 = VECTOR('',#204964,1.); +#204964 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#204965 = ORIENTED_EDGE('',*,*,#204966,.F.); +#204966 = EDGE_CURVE('',#204967,#204959,#204969,.T.); +#204967 = VERTEX_POINT('',#204968); +#204968 = CARTESIAN_POINT('',(127.442096,-88.446609,0.)); +#204969 = LINE('',#204970,#204971); +#204970 = CARTESIAN_POINT('',(127.442096,-88.446609,0.)); +#204971 = VECTOR('',#204972,1.); +#204972 = DIRECTION('',(0.,0.,-1.)); +#204973 = ORIENTED_EDGE('',*,*,#204974,.F.); +#204974 = EDGE_CURVE('',#204936,#204967,#204975,.T.); +#204975 = LINE('',#204976,#204977); +#204976 = CARTESIAN_POINT('',(127.457028,-88.41056,0.)); +#204977 = VECTOR('',#204978,1.); +#204978 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#204979 = PLANE('',#204980); +#204980 = AXIS2_PLACEMENT_3D('',#204981,#204982,#204983); +#204981 = CARTESIAN_POINT('',(127.457028,-88.41056,0.)); +#204982 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#204983 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#204984 = ADVANCED_FACE('',(#204985),#205010,.F.); +#204985 = FACE_BOUND('',#204986,.F.); +#204986 = EDGE_LOOP('',(#204987,#204988,#204996,#205004)); +#204987 = ORIENTED_EDGE('',*,*,#204966,.T.); +#204988 = ORIENTED_EDGE('',*,*,#204989,.T.); +#204989 = EDGE_CURVE('',#204959,#204990,#204992,.T.); +#204990 = VERTEX_POINT('',#204991); +#204991 = CARTESIAN_POINT('',(126.,-89.891421,-3.5E-02)); +#204992 = LINE('',#204993,#204994); +#204993 = CARTESIAN_POINT('',(127.442096,-88.446609,-3.5E-02)); +#204994 = VECTOR('',#204995,1.); +#204995 = DIRECTION('',(-0.706441223237,-0.707771713275,0.)); +#204996 = ORIENTED_EDGE('',*,*,#204997,.F.); +#204997 = EDGE_CURVE('',#204998,#204990,#205000,.T.); +#204998 = VERTEX_POINT('',#204999); +#204999 = CARTESIAN_POINT('',(126.,-89.891421,0.)); +#205000 = LINE('',#205001,#205002); +#205001 = CARTESIAN_POINT('',(126.,-89.891421,0.)); +#205002 = VECTOR('',#205003,1.); +#205003 = DIRECTION('',(0.,0.,-1.)); +#205004 = ORIENTED_EDGE('',*,*,#205005,.F.); +#205005 = EDGE_CURVE('',#204967,#204998,#205006,.T.); +#205006 = LINE('',#205007,#205008); +#205007 = CARTESIAN_POINT('',(127.442096,-88.446609,0.)); +#205008 = VECTOR('',#205009,1.); +#205009 = DIRECTION('',(-0.706441223237,-0.707771713275,0.)); +#205010 = PLANE('',#205011); +#205011 = AXIS2_PLACEMENT_3D('',#205012,#205013,#205014); +#205012 = CARTESIAN_POINT('',(127.442096,-88.446609,0.)); +#205013 = DIRECTION('',(-0.707771713275,0.706441223237,0.)); +#205014 = DIRECTION('',(-0.706441223237,-0.707771713275,0.)); +#205015 = ADVANCED_FACE('',(#205016),#205041,.F.); +#205016 = FACE_BOUND('',#205017,.F.); +#205017 = EDGE_LOOP('',(#205018,#205019,#205027,#205035)); +#205018 = ORIENTED_EDGE('',*,*,#204997,.T.); +#205019 = ORIENTED_EDGE('',*,*,#205020,.T.); +#205020 = EDGE_CURVE('',#204990,#205021,#205023,.T.); +#205021 = VERTEX_POINT('',#205022); +#205022 = CARTESIAN_POINT('',(126.,-90.218869,-3.5E-02)); +#205023 = LINE('',#205024,#205025); +#205024 = CARTESIAN_POINT('',(126.,-89.891421,-3.5E-02)); +#205025 = VECTOR('',#205026,1.); +#205026 = DIRECTION('',(0.,-1.,0.)); +#205027 = ORIENTED_EDGE('',*,*,#205028,.F.); +#205028 = EDGE_CURVE('',#205029,#205021,#205031,.T.); +#205029 = VERTEX_POINT('',#205030); +#205030 = CARTESIAN_POINT('',(126.,-90.218869,0.)); +#205031 = LINE('',#205032,#205033); +#205032 = CARTESIAN_POINT('',(126.,-90.218869,0.)); +#205033 = VECTOR('',#205034,1.); +#205034 = DIRECTION('',(0.,0.,-1.)); +#205035 = ORIENTED_EDGE('',*,*,#205036,.F.); +#205036 = EDGE_CURVE('',#204998,#205029,#205037,.T.); +#205037 = LINE('',#205038,#205039); +#205038 = CARTESIAN_POINT('',(126.,-89.891421,0.)); +#205039 = VECTOR('',#205040,1.); +#205040 = DIRECTION('',(0.,-1.,0.)); +#205041 = PLANE('',#205042); +#205042 = AXIS2_PLACEMENT_3D('',#205043,#205044,#205045); +#205043 = CARTESIAN_POINT('',(126.,-89.891421,0.)); +#205044 = DIRECTION('',(-1.,-0.,-0.)); +#205045 = DIRECTION('',(0.,-1.,0.)); +#205046 = ADVANCED_FACE('',(#205047),#205072,.F.); +#205047 = FACE_BOUND('',#205048,.F.); +#205048 = EDGE_LOOP('',(#205049,#205050,#205058,#205066)); +#205049 = ORIENTED_EDGE('',*,*,#205028,.T.); +#205050 = ORIENTED_EDGE('',*,*,#205051,.T.); +#205051 = EDGE_CURVE('',#205021,#205052,#205054,.T.); +#205052 = VERTEX_POINT('',#205053); +#205053 = CARTESIAN_POINT('',(126.014805,-90.222836,-3.5E-02)); +#205054 = LINE('',#205055,#205056); +#205055 = CARTESIAN_POINT('',(126.,-90.218869,-3.5E-02)); +#205056 = VECTOR('',#205057,1.); +#205057 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#205058 = ORIENTED_EDGE('',*,*,#205059,.F.); +#205059 = EDGE_CURVE('',#205060,#205052,#205062,.T.); +#205060 = VERTEX_POINT('',#205061); +#205061 = CARTESIAN_POINT('',(126.014805,-90.222836,0.)); +#205062 = LINE('',#205063,#205064); +#205063 = CARTESIAN_POINT('',(126.014805,-90.222836,0.)); +#205064 = VECTOR('',#205065,1.); +#205065 = DIRECTION('',(0.,0.,-1.)); +#205066 = ORIENTED_EDGE('',*,*,#205067,.F.); +#205067 = EDGE_CURVE('',#205029,#205060,#205068,.T.); +#205068 = LINE('',#205069,#205070); +#205069 = CARTESIAN_POINT('',(126.,-90.218869,0.)); +#205070 = VECTOR('',#205071,1.); +#205071 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#205072 = PLANE('',#205073); +#205073 = AXIS2_PLACEMENT_3D('',#205074,#205075,#205076); +#205074 = CARTESIAN_POINT('',(126.,-90.218869,0.)); +#205075 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#205076 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#205077 = ADVANCED_FACE('',(#205078),#205105,.T.); +#205078 = FACE_BOUND('',#205079,.F.); +#205079 = EDGE_LOOP('',(#205080,#205081,#205090,#205098)); +#205080 = ORIENTED_EDGE('',*,*,#205059,.T.); +#205081 = ORIENTED_EDGE('',*,*,#205082,.T.); +#205082 = EDGE_CURVE('',#205052,#205083,#205085,.T.); +#205083 = VERTEX_POINT('',#205084); +#205084 = CARTESIAN_POINT('',(125.785195,-90.222836,-3.5E-02)); +#205085 = CIRCLE('',#205086,0.299999850918); +#205086 = AXIS2_PLACEMENT_3D('',#205087,#205088,#205089); +#205087 = CARTESIAN_POINT('',(125.9,-90.49999971069,-3.5E-02)); +#205088 = DIRECTION('',(0.,0.,-1.)); +#205089 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#205090 = ORIENTED_EDGE('',*,*,#205091,.F.); +#205091 = EDGE_CURVE('',#205092,#205083,#205094,.T.); +#205092 = VERTEX_POINT('',#205093); +#205093 = CARTESIAN_POINT('',(125.785195,-90.222836,0.)); +#205094 = LINE('',#205095,#205096); +#205095 = CARTESIAN_POINT('',(125.785195,-90.222836,0.)); +#205096 = VECTOR('',#205097,1.); +#205097 = DIRECTION('',(0.,0.,-1.)); +#205098 = ORIENTED_EDGE('',*,*,#205099,.F.); +#205099 = EDGE_CURVE('',#205060,#205092,#205100,.T.); +#205100 = CIRCLE('',#205101,0.299999850918); +#205101 = AXIS2_PLACEMENT_3D('',#205102,#205103,#205104); +#205102 = CARTESIAN_POINT('',(125.9,-90.49999971069,0.)); +#205103 = DIRECTION('',(0.,0.,-1.)); +#205104 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#205105 = CYLINDRICAL_SURFACE('',#205106,0.299999850918); +#205106 = AXIS2_PLACEMENT_3D('',#205107,#205108,#205109); +#205107 = CARTESIAN_POINT('',(125.9,-90.49999971069,0.)); +#205108 = DIRECTION('',(-0.,-0.,1.)); +#205109 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#205110 = ADVANCED_FACE('',(#205111),#205136,.F.); +#205111 = FACE_BOUND('',#205112,.F.); +#205112 = EDGE_LOOP('',(#205113,#205114,#205122,#205130)); +#205113 = ORIENTED_EDGE('',*,*,#205091,.T.); +#205114 = ORIENTED_EDGE('',*,*,#205115,.T.); +#205115 = EDGE_CURVE('',#205083,#205116,#205118,.T.); +#205116 = VERTEX_POINT('',#205117); +#205117 = CARTESIAN_POINT('',(125.8,-90.218869,-3.5E-02)); +#205118 = LINE('',#205119,#205120); +#205119 = CARTESIAN_POINT('',(125.785195,-90.222836,-3.5E-02)); +#205120 = VECTOR('',#205121,1.); +#205121 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#205122 = ORIENTED_EDGE('',*,*,#205123,.F.); +#205123 = EDGE_CURVE('',#205124,#205116,#205126,.T.); +#205124 = VERTEX_POINT('',#205125); +#205125 = CARTESIAN_POINT('',(125.8,-90.218869,0.)); +#205126 = LINE('',#205127,#205128); +#205127 = CARTESIAN_POINT('',(125.8,-90.218869,0.)); +#205128 = VECTOR('',#205129,1.); +#205129 = DIRECTION('',(0.,0.,-1.)); +#205130 = ORIENTED_EDGE('',*,*,#205131,.F.); +#205131 = EDGE_CURVE('',#205092,#205124,#205132,.T.); +#205132 = LINE('',#205133,#205134); +#205133 = CARTESIAN_POINT('',(125.785195,-90.222836,0.)); +#205134 = VECTOR('',#205135,1.); +#205135 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#205136 = PLANE('',#205137); +#205137 = AXIS2_PLACEMENT_3D('',#205138,#205139,#205140); +#205138 = CARTESIAN_POINT('',(125.785195,-90.222836,0.)); +#205139 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#205140 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#205141 = ADVANCED_FACE('',(#205142),#205167,.F.); +#205142 = FACE_BOUND('',#205143,.F.); +#205143 = EDGE_LOOP('',(#205144,#205145,#205153,#205161)); +#205144 = ORIENTED_EDGE('',*,*,#205123,.T.); +#205145 = ORIENTED_EDGE('',*,*,#205146,.T.); +#205146 = EDGE_CURVE('',#205116,#205147,#205149,.T.); +#205147 = VERTEX_POINT('',#205148); +#205148 = CARTESIAN_POINT('',(125.801921,-89.830491,-3.5E-02)); +#205149 = LINE('',#205150,#205151); +#205150 = CARTESIAN_POINT('',(125.8,-90.218869,-3.5E-02)); +#205151 = VECTOR('',#205152,1.); +#205152 = DIRECTION('',(4.946151691857E-03,0.999987767717,0.)); +#205153 = ORIENTED_EDGE('',*,*,#205154,.F.); +#205154 = EDGE_CURVE('',#205155,#205147,#205157,.T.); +#205155 = VERTEX_POINT('',#205156); +#205156 = CARTESIAN_POINT('',(125.801921,-89.830491,0.)); +#205157 = LINE('',#205158,#205159); +#205158 = CARTESIAN_POINT('',(125.801921,-89.830491,0.)); +#205159 = VECTOR('',#205160,1.); +#205160 = DIRECTION('',(0.,0.,-1.)); +#205161 = ORIENTED_EDGE('',*,*,#205162,.F.); +#205162 = EDGE_CURVE('',#205124,#205155,#205163,.T.); +#205163 = LINE('',#205164,#205165); +#205164 = CARTESIAN_POINT('',(125.8,-90.218869,0.)); +#205165 = VECTOR('',#205166,1.); +#205166 = DIRECTION('',(4.946151691857E-03,0.999987767717,0.)); +#205167 = PLANE('',#205168); +#205168 = AXIS2_PLACEMENT_3D('',#205169,#205170,#205171); +#205169 = CARTESIAN_POINT('',(125.8,-90.218869,0.)); +#205170 = DIRECTION('',(0.999987767717,-4.946151691857E-03,0.)); +#205171 = DIRECTION('',(4.946151691857E-03,0.999987767717,0.)); +#205172 = ADVANCED_FACE('',(#205173),#205198,.F.); +#205173 = FACE_BOUND('',#205174,.F.); +#205174 = EDGE_LOOP('',(#205175,#205176,#205184,#205192)); +#205175 = ORIENTED_EDGE('',*,*,#205154,.T.); +#205176 = ORIENTED_EDGE('',*,*,#205177,.T.); +#205177 = EDGE_CURVE('',#205147,#205178,#205180,.T.); +#205178 = VERTEX_POINT('',#205179); +#205179 = CARTESIAN_POINT('',(125.816853,-89.794443,-3.5E-02)); +#205180 = LINE('',#205181,#205182); +#205181 = CARTESIAN_POINT('',(125.801921,-89.830491,-3.5E-02)); +#205182 = VECTOR('',#205183,1.); +#205183 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205184 = ORIENTED_EDGE('',*,*,#205185,.F.); +#205185 = EDGE_CURVE('',#205186,#205178,#205188,.T.); +#205186 = VERTEX_POINT('',#205187); +#205187 = CARTESIAN_POINT('',(125.816853,-89.794443,0.)); +#205188 = LINE('',#205189,#205190); +#205189 = CARTESIAN_POINT('',(125.816853,-89.794443,0.)); +#205190 = VECTOR('',#205191,1.); +#205191 = DIRECTION('',(0.,0.,-1.)); +#205192 = ORIENTED_EDGE('',*,*,#205193,.F.); +#205193 = EDGE_CURVE('',#205155,#205186,#205194,.T.); +#205194 = LINE('',#205195,#205196); +#205195 = CARTESIAN_POINT('',(125.801921,-89.830491,0.)); +#205196 = VECTOR('',#205197,1.); +#205197 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205198 = PLANE('',#205199); +#205199 = AXIS2_PLACEMENT_3D('',#205200,#205201,#205202); +#205200 = CARTESIAN_POINT('',(125.801921,-89.830491,0.)); +#205201 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205202 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205203 = ADVANCED_FACE('',(#205204),#205229,.F.); +#205204 = FACE_BOUND('',#205205,.F.); +#205205 = EDGE_LOOP('',(#205206,#205207,#205215,#205223)); +#205206 = ORIENTED_EDGE('',*,*,#205185,.T.); +#205207 = ORIENTED_EDGE('',*,*,#205208,.T.); +#205208 = EDGE_CURVE('',#205178,#205209,#205211,.T.); +#205209 = VERTEX_POINT('',#205210); +#205210 = CARTESIAN_POINT('',(127.258949,-88.349629,-3.5E-02)); +#205211 = LINE('',#205212,#205213); +#205212 = CARTESIAN_POINT('',(125.816853,-89.794443,-3.5E-02)); +#205213 = VECTOR('',#205214,1.); +#205214 = DIRECTION('',(0.706440733366,0.707772202224,0.)); +#205215 = ORIENTED_EDGE('',*,*,#205216,.F.); +#205216 = EDGE_CURVE('',#205217,#205209,#205219,.T.); +#205217 = VERTEX_POINT('',#205218); +#205218 = CARTESIAN_POINT('',(127.258949,-88.349629,0.)); +#205219 = LINE('',#205220,#205221); +#205220 = CARTESIAN_POINT('',(127.258949,-88.349629,0.)); +#205221 = VECTOR('',#205222,1.); +#205222 = DIRECTION('',(0.,0.,-1.)); +#205223 = ORIENTED_EDGE('',*,*,#205224,.F.); +#205224 = EDGE_CURVE('',#205186,#205217,#205225,.T.); +#205225 = LINE('',#205226,#205227); +#205226 = CARTESIAN_POINT('',(125.816853,-89.794443,0.)); +#205227 = VECTOR('',#205228,1.); +#205228 = DIRECTION('',(0.706440733366,0.707772202224,0.)); +#205229 = PLANE('',#205230); +#205230 = AXIS2_PLACEMENT_3D('',#205231,#205232,#205233); +#205231 = CARTESIAN_POINT('',(125.816853,-89.794443,0.)); +#205232 = DIRECTION('',(0.707772202224,-0.706440733366,0.)); +#205233 = DIRECTION('',(0.706440733366,0.707772202224,0.)); +#205234 = ADVANCED_FACE('',(#205235),#205260,.F.); +#205235 = FACE_BOUND('',#205236,.F.); +#205236 = EDGE_LOOP('',(#205237,#205238,#205246,#205254)); +#205237 = ORIENTED_EDGE('',*,*,#205216,.T.); +#205238 = ORIENTED_EDGE('',*,*,#205239,.T.); +#205239 = EDGE_CURVE('',#205209,#205240,#205242,.T.); +#205240 = VERTEX_POINT('',#205241); +#205241 = CARTESIAN_POINT('',(127.26087,-76.121542,-3.5E-02)); +#205242 = LINE('',#205243,#205244); +#205243 = CARTESIAN_POINT('',(127.258949,-88.349629,-3.5E-02)); +#205244 = VECTOR('',#205245,1.); +#205245 = DIRECTION('',(1.57097342887E-04,0.99999998766,0.)); +#205246 = ORIENTED_EDGE('',*,*,#205247,.F.); +#205247 = EDGE_CURVE('',#205248,#205240,#205250,.T.); +#205248 = VERTEX_POINT('',#205249); +#205249 = CARTESIAN_POINT('',(127.26087,-76.121542,0.)); +#205250 = LINE('',#205251,#205252); +#205251 = CARTESIAN_POINT('',(127.26087,-76.121542,0.)); +#205252 = VECTOR('',#205253,1.); +#205253 = DIRECTION('',(0.,0.,-1.)); +#205254 = ORIENTED_EDGE('',*,*,#205255,.F.); +#205255 = EDGE_CURVE('',#205217,#205248,#205256,.T.); +#205256 = LINE('',#205257,#205258); +#205257 = CARTESIAN_POINT('',(127.258949,-88.349629,0.)); +#205258 = VECTOR('',#205259,1.); +#205259 = DIRECTION('',(1.57097342887E-04,0.99999998766,0.)); +#205260 = PLANE('',#205261); +#205261 = AXIS2_PLACEMENT_3D('',#205262,#205263,#205264); +#205262 = CARTESIAN_POINT('',(127.258949,-88.349629,0.)); +#205263 = DIRECTION('',(0.99999998766,-1.57097342887E-04,0.)); +#205264 = DIRECTION('',(1.57097342887E-04,0.99999998766,0.)); +#205265 = ADVANCED_FACE('',(#205266),#205291,.F.); +#205266 = FACE_BOUND('',#205267,.F.); +#205267 = EDGE_LOOP('',(#205268,#205269,#205277,#205285)); +#205268 = ORIENTED_EDGE('',*,*,#205247,.T.); +#205269 = ORIENTED_EDGE('',*,*,#205270,.T.); +#205270 = EDGE_CURVE('',#205240,#205271,#205273,.T.); +#205271 = VERTEX_POINT('',#205272); +#205272 = CARTESIAN_POINT('',(127.275802,-76.085494,-3.5E-02)); +#205273 = LINE('',#205274,#205275); +#205274 = CARTESIAN_POINT('',(127.26087,-76.121542,-3.5E-02)); +#205275 = VECTOR('',#205276,1.); +#205276 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205277 = ORIENTED_EDGE('',*,*,#205278,.F.); +#205278 = EDGE_CURVE('',#205279,#205271,#205281,.T.); +#205279 = VERTEX_POINT('',#205280); +#205280 = CARTESIAN_POINT('',(127.275802,-76.085494,0.)); +#205281 = LINE('',#205282,#205283); +#205282 = CARTESIAN_POINT('',(127.275802,-76.085494,0.)); +#205283 = VECTOR('',#205284,1.); +#205284 = DIRECTION('',(0.,0.,-1.)); +#205285 = ORIENTED_EDGE('',*,*,#205286,.F.); +#205286 = EDGE_CURVE('',#205248,#205279,#205287,.T.); +#205287 = LINE('',#205288,#205289); +#205288 = CARTESIAN_POINT('',(127.26087,-76.121542,0.)); +#205289 = VECTOR('',#205290,1.); +#205290 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205291 = PLANE('',#205292); +#205292 = AXIS2_PLACEMENT_3D('',#205293,#205294,#205295); +#205293 = CARTESIAN_POINT('',(127.26087,-76.121542,0.)); +#205294 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205295 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#205296 = ADVANCED_FACE('',(#205297),#205322,.F.); +#205297 = FACE_BOUND('',#205298,.F.); +#205298 = EDGE_LOOP('',(#205299,#205300,#205308,#205316)); +#205299 = ORIENTED_EDGE('',*,*,#205278,.T.); +#205300 = ORIENTED_EDGE('',*,*,#205301,.T.); +#205301 = EDGE_CURVE('',#205271,#205302,#205304,.T.); +#205302 = VERTEX_POINT('',#205303); +#205303 = CARTESIAN_POINT('',(127.730499,-75.628078,-3.5E-02)); +#205304 = LINE('',#205305,#205306); +#205305 = CARTESIAN_POINT('',(127.275802,-76.085494,-3.5E-02)); +#205306 = VECTOR('',#205307,1.); +#205307 = DIRECTION('',(0.704995770339,0.709211508511,0.)); +#205308 = ORIENTED_EDGE('',*,*,#205309,.F.); +#205309 = EDGE_CURVE('',#205310,#205302,#205312,.T.); +#205310 = VERTEX_POINT('',#205311); +#205311 = CARTESIAN_POINT('',(127.730499,-75.628078,0.)); +#205312 = LINE('',#205313,#205314); +#205313 = CARTESIAN_POINT('',(127.730499,-75.628078,0.)); +#205314 = VECTOR('',#205315,1.); +#205315 = DIRECTION('',(0.,0.,-1.)); +#205316 = ORIENTED_EDGE('',*,*,#205317,.F.); +#205317 = EDGE_CURVE('',#205279,#205310,#205318,.T.); +#205318 = LINE('',#205319,#205320); +#205319 = CARTESIAN_POINT('',(127.275802,-76.085494,0.)); +#205320 = VECTOR('',#205321,1.); +#205321 = DIRECTION('',(0.704995770339,0.709211508511,0.)); +#205322 = PLANE('',#205323); +#205323 = AXIS2_PLACEMENT_3D('',#205324,#205325,#205326); +#205324 = CARTESIAN_POINT('',(127.275802,-76.085494,0.)); +#205325 = DIRECTION('',(0.709211508511,-0.704995770339,0.)); +#205326 = DIRECTION('',(0.704995770339,0.709211508511,0.)); +#205327 = ADVANCED_FACE('',(#205328),#205353,.F.); +#205328 = FACE_BOUND('',#205329,.F.); +#205329 = EDGE_LOOP('',(#205330,#205331,#205339,#205347)); +#205330 = ORIENTED_EDGE('',*,*,#205309,.T.); +#205331 = ORIENTED_EDGE('',*,*,#205332,.T.); +#205332 = EDGE_CURVE('',#205302,#205333,#205335,.T.); +#205333 = VERTEX_POINT('',#205334); +#205334 = CARTESIAN_POINT('',(127.722836,-75.614805,-3.5E-02)); +#205335 = LINE('',#205336,#205337); +#205336 = CARTESIAN_POINT('',(127.730499,-75.628078,-3.5E-02)); +#205337 = VECTOR('',#205338,1.); +#205338 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#205339 = ORIENTED_EDGE('',*,*,#205340,.F.); +#205340 = EDGE_CURVE('',#205341,#205333,#205343,.T.); +#205341 = VERTEX_POINT('',#205342); +#205342 = CARTESIAN_POINT('',(127.722836,-75.614805,0.)); +#205343 = LINE('',#205344,#205345); +#205344 = CARTESIAN_POINT('',(127.722836,-75.614805,0.)); +#205345 = VECTOR('',#205346,1.); +#205346 = DIRECTION('',(0.,0.,-1.)); +#205347 = ORIENTED_EDGE('',*,*,#205348,.F.); +#205348 = EDGE_CURVE('',#205310,#205341,#205349,.T.); +#205349 = LINE('',#205350,#205351); +#205350 = CARTESIAN_POINT('',(127.730499,-75.628078,0.)); +#205351 = VECTOR('',#205352,1.); +#205352 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#205353 = PLANE('',#205354); +#205354 = AXIS2_PLACEMENT_3D('',#205355,#205356,#205357); +#205355 = CARTESIAN_POINT('',(127.730499,-75.628078,0.)); +#205356 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#205357 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#205358 = ADVANCED_FACE('',(#205359),#205386,.T.); +#205359 = FACE_BOUND('',#205360,.F.); +#205360 = EDGE_LOOP('',(#205361,#205362,#205371,#205379)); +#205361 = ORIENTED_EDGE('',*,*,#205340,.T.); +#205362 = ORIENTED_EDGE('',*,*,#205363,.T.); +#205363 = EDGE_CURVE('',#205333,#205364,#205366,.T.); +#205364 = VERTEX_POINT('',#205365); +#205365 = CARTESIAN_POINT('',(127.885195,-75.777164,-3.5E-02)); +#205366 = CIRCLE('',#205367,0.300000118202); +#205367 = AXIS2_PLACEMENT_3D('',#205368,#205369,#205370); +#205368 = CARTESIAN_POINT('',(128.,-75.5,-3.5E-02)); +#205369 = DIRECTION('',(0.,0.,-1.)); +#205370 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#205371 = ORIENTED_EDGE('',*,*,#205372,.F.); +#205372 = EDGE_CURVE('',#205373,#205364,#205375,.T.); +#205373 = VERTEX_POINT('',#205374); +#205374 = CARTESIAN_POINT('',(127.885195,-75.777164,0.)); +#205375 = LINE('',#205376,#205377); +#205376 = CARTESIAN_POINT('',(127.885195,-75.777164,0.)); +#205377 = VECTOR('',#205378,1.); +#205378 = DIRECTION('',(0.,0.,-1.)); +#205379 = ORIENTED_EDGE('',*,*,#205380,.F.); +#205380 = EDGE_CURVE('',#205341,#205373,#205381,.T.); +#205381 = CIRCLE('',#205382,0.300000118202); +#205382 = AXIS2_PLACEMENT_3D('',#205383,#205384,#205385); +#205383 = CARTESIAN_POINT('',(128.,-75.5,0.)); +#205384 = DIRECTION('',(0.,0.,-1.)); +#205385 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#205386 = CYLINDRICAL_SURFACE('',#205387,0.300000118202); +#205387 = AXIS2_PLACEMENT_3D('',#205388,#205389,#205390); +#205388 = CARTESIAN_POINT('',(128.,-75.5,0.)); +#205389 = DIRECTION('',(-0.,-0.,1.)); +#205390 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#205391 = ADVANCED_FACE('',(#205392),#205408,.F.); +#205392 = FACE_BOUND('',#205393,.F.); +#205393 = EDGE_LOOP('',(#205394,#205395,#205401,#205402)); +#205394 = ORIENTED_EDGE('',*,*,#205372,.T.); +#205395 = ORIENTED_EDGE('',*,*,#205396,.T.); +#205396 = EDGE_CURVE('',#205364,#204889,#205397,.T.); +#205397 = LINE('',#205398,#205399); +#205398 = CARTESIAN_POINT('',(127.885195,-75.777164,-3.5E-02)); +#205399 = VECTOR('',#205400,1.); +#205400 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#205401 = ORIENTED_EDGE('',*,*,#204886,.F.); +#205402 = ORIENTED_EDGE('',*,*,#205403,.F.); +#205403 = EDGE_CURVE('',#205373,#204887,#205404,.T.); +#205404 = LINE('',#205405,#205406); +#205405 = CARTESIAN_POINT('',(127.885195,-75.777164,0.)); +#205406 = VECTOR('',#205407,1.); +#205407 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#205408 = PLANE('',#205409); +#205409 = AXIS2_PLACEMENT_3D('',#205410,#205411,#205412); +#205410 = CARTESIAN_POINT('',(127.885195,-75.777164,0.)); +#205411 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#205412 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#205413 = ADVANCED_FACE('',(#205414),#205441,.F.); +#205414 = FACE_BOUND('',#205415,.F.); +#205415 = EDGE_LOOP('',(#205416,#205426,#205433,#205434)); +#205416 = ORIENTED_EDGE('',*,*,#205417,.T.); +#205417 = EDGE_CURVE('',#205418,#205420,#205422,.T.); +#205418 = VERTEX_POINT('',#205419); +#205419 = CARTESIAN_POINT('',(126.037255,-90.5,0.)); +#205420 = VERTEX_POINT('',#205421); +#205421 = CARTESIAN_POINT('',(126.037255,-90.5,-3.5E-02)); +#205422 = LINE('',#205423,#205424); +#205423 = CARTESIAN_POINT('',(126.037255,-90.5,0.)); +#205424 = VECTOR('',#205425,1.); +#205425 = DIRECTION('',(0.,0.,-1.)); +#205426 = ORIENTED_EDGE('',*,*,#205427,.T.); +#205427 = EDGE_CURVE('',#205420,#205420,#205428,.T.); +#205428 = CIRCLE('',#205429,0.137255); +#205429 = AXIS2_PLACEMENT_3D('',#205430,#205431,#205432); +#205430 = CARTESIAN_POINT('',(125.9,-90.5,-3.5E-02)); +#205431 = DIRECTION('',(0.,0.,1.)); +#205432 = DIRECTION('',(1.,0.,-0.)); +#205433 = ORIENTED_EDGE('',*,*,#205417,.F.); +#205434 = ORIENTED_EDGE('',*,*,#205435,.F.); +#205435 = EDGE_CURVE('',#205418,#205418,#205436,.T.); +#205436 = CIRCLE('',#205437,0.137255); +#205437 = AXIS2_PLACEMENT_3D('',#205438,#205439,#205440); +#205438 = CARTESIAN_POINT('',(125.9,-90.5,0.)); +#205439 = DIRECTION('',(0.,0.,1.)); +#205440 = DIRECTION('',(1.,0.,-0.)); +#205441 = CYLINDRICAL_SURFACE('',#205442,0.137255); +#205442 = AXIS2_PLACEMENT_3D('',#205443,#205444,#205445); +#205443 = CARTESIAN_POINT('',(125.9,-90.5,0.)); +#205444 = DIRECTION('',(0.,0.,1.)); +#205445 = DIRECTION('',(1.,0.,-0.)); +#205446 = ADVANCED_FACE('',(#205447),#205474,.F.); +#205447 = FACE_BOUND('',#205448,.F.); +#205448 = EDGE_LOOP('',(#205449,#205459,#205466,#205467)); +#205449 = ORIENTED_EDGE('',*,*,#205450,.T.); +#205450 = EDGE_CURVE('',#205451,#205453,#205455,.T.); +#205451 = VERTEX_POINT('',#205452); +#205452 = CARTESIAN_POINT('',(128.137255,-75.5,0.)); +#205453 = VERTEX_POINT('',#205454); +#205454 = CARTESIAN_POINT('',(128.137255,-75.5,-3.5E-02)); +#205455 = LINE('',#205456,#205457); +#205456 = CARTESIAN_POINT('',(128.137255,-75.5,0.)); +#205457 = VECTOR('',#205458,1.); +#205458 = DIRECTION('',(0.,0.,-1.)); +#205459 = ORIENTED_EDGE('',*,*,#205460,.T.); +#205460 = EDGE_CURVE('',#205453,#205453,#205461,.T.); +#205461 = CIRCLE('',#205462,0.137255); +#205462 = AXIS2_PLACEMENT_3D('',#205463,#205464,#205465); +#205463 = CARTESIAN_POINT('',(128.,-75.5,-3.5E-02)); +#205464 = DIRECTION('',(0.,0.,1.)); +#205465 = DIRECTION('',(1.,0.,-0.)); +#205466 = ORIENTED_EDGE('',*,*,#205450,.F.); +#205467 = ORIENTED_EDGE('',*,*,#205468,.F.); +#205468 = EDGE_CURVE('',#205451,#205451,#205469,.T.); +#205469 = CIRCLE('',#205470,0.137255); +#205470 = AXIS2_PLACEMENT_3D('',#205471,#205472,#205473); +#205471 = CARTESIAN_POINT('',(128.,-75.5,0.)); +#205472 = DIRECTION('',(0.,0.,1.)); +#205473 = DIRECTION('',(1.,0.,-0.)); +#205474 = CYLINDRICAL_SURFACE('',#205475,0.137255); +#205475 = AXIS2_PLACEMENT_3D('',#205476,#205477,#205478); +#205476 = CARTESIAN_POINT('',(128.,-75.5,0.)); +#205477 = DIRECTION('',(0.,0.,1.)); +#205478 = DIRECTION('',(1.,0.,-0.)); +#205479 = ADVANCED_FACE('',(#205480,#205499,#205502),#205505,.F.); +#205480 = FACE_BOUND('',#205481,.F.); +#205481 = EDGE_LOOP('',(#205482,#205483,#205484,#205485,#205486,#205487, + #205488,#205489,#205490,#205491,#205492,#205493,#205494,#205495, + #205496,#205497,#205498)); +#205482 = ORIENTED_EDGE('',*,*,#204912,.T.); +#205483 = ORIENTED_EDGE('',*,*,#204943,.T.); +#205484 = ORIENTED_EDGE('',*,*,#204974,.T.); +#205485 = ORIENTED_EDGE('',*,*,#205005,.T.); +#205486 = ORIENTED_EDGE('',*,*,#205036,.T.); +#205487 = ORIENTED_EDGE('',*,*,#205067,.T.); +#205488 = ORIENTED_EDGE('',*,*,#205099,.T.); +#205489 = ORIENTED_EDGE('',*,*,#205131,.T.); +#205490 = ORIENTED_EDGE('',*,*,#205162,.T.); +#205491 = ORIENTED_EDGE('',*,*,#205193,.T.); +#205492 = ORIENTED_EDGE('',*,*,#205224,.T.); +#205493 = ORIENTED_EDGE('',*,*,#205255,.T.); +#205494 = ORIENTED_EDGE('',*,*,#205286,.T.); +#205495 = ORIENTED_EDGE('',*,*,#205317,.T.); +#205496 = ORIENTED_EDGE('',*,*,#205348,.T.); +#205497 = ORIENTED_EDGE('',*,*,#205380,.T.); +#205498 = ORIENTED_EDGE('',*,*,#205403,.T.); +#205499 = FACE_BOUND('',#205500,.F.); +#205500 = EDGE_LOOP('',(#205501)); +#205501 = ORIENTED_EDGE('',*,*,#205435,.T.); +#205502 = FACE_BOUND('',#205503,.F.); +#205503 = EDGE_LOOP('',(#205504)); +#205504 = ORIENTED_EDGE('',*,*,#205468,.T.); +#205505 = PLANE('',#205506); +#205506 = AXIS2_PLACEMENT_3D('',#205507,#205508,#205509); +#205507 = CARTESIAN_POINT('',(0.,0.,0.)); +#205508 = DIRECTION('',(-0.,-0.,-1.)); +#205509 = DIRECTION('',(-1.,0.,0.)); +#205510 = ADVANCED_FACE('',(#205511,#205530,#205533),#205536,.T.); +#205511 = FACE_BOUND('',#205512,.T.); +#205512 = EDGE_LOOP('',(#205513,#205514,#205515,#205516,#205517,#205518, + #205519,#205520,#205521,#205522,#205523,#205524,#205525,#205526, + #205527,#205528,#205529)); +#205513 = ORIENTED_EDGE('',*,*,#204896,.T.); +#205514 = ORIENTED_EDGE('',*,*,#204927,.T.); +#205515 = ORIENTED_EDGE('',*,*,#204958,.T.); +#205516 = ORIENTED_EDGE('',*,*,#204989,.T.); +#205517 = ORIENTED_EDGE('',*,*,#205020,.T.); +#205518 = ORIENTED_EDGE('',*,*,#205051,.T.); +#205519 = ORIENTED_EDGE('',*,*,#205082,.T.); +#205520 = ORIENTED_EDGE('',*,*,#205115,.T.); +#205521 = ORIENTED_EDGE('',*,*,#205146,.T.); +#205522 = ORIENTED_EDGE('',*,*,#205177,.T.); +#205523 = ORIENTED_EDGE('',*,*,#205208,.T.); +#205524 = ORIENTED_EDGE('',*,*,#205239,.T.); +#205525 = ORIENTED_EDGE('',*,*,#205270,.T.); +#205526 = ORIENTED_EDGE('',*,*,#205301,.T.); +#205527 = ORIENTED_EDGE('',*,*,#205332,.T.); +#205528 = ORIENTED_EDGE('',*,*,#205363,.T.); +#205529 = ORIENTED_EDGE('',*,*,#205396,.T.); +#205530 = FACE_BOUND('',#205531,.T.); +#205531 = EDGE_LOOP('',(#205532)); +#205532 = ORIENTED_EDGE('',*,*,#205427,.T.); +#205533 = FACE_BOUND('',#205534,.T.); +#205534 = EDGE_LOOP('',(#205535)); +#205535 = ORIENTED_EDGE('',*,*,#205460,.T.); +#205536 = PLANE('',#205537); +#205537 = AXIS2_PLACEMENT_3D('',#205538,#205539,#205540); +#205538 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#205539 = DIRECTION('',(-0.,-0.,-1.)); +#205540 = DIRECTION('',(-1.,0.,0.)); +#205541 = MANIFOLD_SOLID_BREP('',#205542); +#205542 = CLOSED_SHELL('',(#205543,#205583,#205614,#205645,#205676, + #205707,#205738,#205769,#205802,#205833,#205864,#205895,#205926, + #205957,#205988,#206019,#206050,#206083,#206105,#206138,#206167)); +#205543 = ADVANCED_FACE('',(#205544),#205578,.T.); +#205544 = FACE_BOUND('',#205545,.T.); +#205545 = EDGE_LOOP('',(#205546,#205556,#205564,#205572)); +#205546 = ORIENTED_EDGE('',*,*,#205547,.T.); +#205547 = EDGE_CURVE('',#205548,#205550,#205552,.T.); +#205548 = VERTEX_POINT('',#205549); +#205549 = CARTESIAN_POINT('',(126.859306,-76.648529,1.51)); +#205550 = VERTEX_POINT('',#205551); +#205551 = CARTESIAN_POINT('',(126.859306,-76.648529,1.545)); +#205552 = LINE('',#205553,#205554); +#205553 = CARTESIAN_POINT('',(126.859306,-76.648529,1.51)); +#205554 = VECTOR('',#205555,1.); +#205555 = DIRECTION('',(0.,0.,1.)); +#205556 = ORIENTED_EDGE('',*,*,#205557,.T.); +#205557 = EDGE_CURVE('',#205550,#205558,#205560,.T.); +#205558 = VERTEX_POINT('',#205559); +#205559 = CARTESIAN_POINT('',(127.419509,-76.65045,1.545)); +#205560 = LINE('',#205561,#205562); +#205561 = CARTESIAN_POINT('',(126.859306,-76.648529,1.545)); +#205562 = VECTOR('',#205563,1.); +#205563 = DIRECTION('',(0.99999412064,-3.429093928022E-03,0.)); +#205564 = ORIENTED_EDGE('',*,*,#205565,.F.); +#205565 = EDGE_CURVE('',#205566,#205558,#205568,.T.); +#205566 = VERTEX_POINT('',#205567); +#205567 = CARTESIAN_POINT('',(127.419509,-76.65045,1.51)); +#205568 = LINE('',#205569,#205570); +#205569 = CARTESIAN_POINT('',(127.419509,-76.65045,1.51)); +#205570 = VECTOR('',#205571,1.); +#205571 = DIRECTION('',(0.,0.,1.)); +#205572 = ORIENTED_EDGE('',*,*,#205573,.F.); +#205573 = EDGE_CURVE('',#205548,#205566,#205574,.T.); +#205574 = LINE('',#205575,#205576); +#205575 = CARTESIAN_POINT('',(126.859306,-76.648529,1.51)); +#205576 = VECTOR('',#205577,1.); +#205577 = DIRECTION('',(0.99999412064,-3.429093928022E-03,0.)); +#205578 = PLANE('',#205579); +#205579 = AXIS2_PLACEMENT_3D('',#205580,#205581,#205582); +#205580 = CARTESIAN_POINT('',(126.859306,-76.648529,1.51)); +#205581 = DIRECTION('',(3.429093928022E-03,0.99999412064,-0.)); +#205582 = DIRECTION('',(0.99999412064,-3.429093928022E-03,0.)); +#205583 = ADVANCED_FACE('',(#205584),#205609,.T.); +#205584 = FACE_BOUND('',#205585,.T.); +#205585 = EDGE_LOOP('',(#205586,#205587,#205595,#205603)); +#205586 = ORIENTED_EDGE('',*,*,#205565,.T.); +#205587 = ORIENTED_EDGE('',*,*,#205588,.T.); +#205588 = EDGE_CURVE('',#205558,#205589,#205591,.T.); +#205589 = VERTEX_POINT('',#205590); +#205590 = CARTESIAN_POINT('',(127.455557,-76.665382,1.545)); +#205591 = LINE('',#205592,#205593); +#205592 = CARTESIAN_POINT('',(127.419509,-76.65045,1.545)); +#205593 = VECTOR('',#205594,1.); +#205594 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205595 = ORIENTED_EDGE('',*,*,#205596,.F.); +#205596 = EDGE_CURVE('',#205597,#205589,#205599,.T.); +#205597 = VERTEX_POINT('',#205598); +#205598 = CARTESIAN_POINT('',(127.455557,-76.665382,1.51)); +#205599 = LINE('',#205600,#205601); +#205600 = CARTESIAN_POINT('',(127.455557,-76.665382,1.51)); +#205601 = VECTOR('',#205602,1.); +#205602 = DIRECTION('',(0.,0.,1.)); +#205603 = ORIENTED_EDGE('',*,*,#205604,.F.); +#205604 = EDGE_CURVE('',#205566,#205597,#205605,.T.); +#205605 = LINE('',#205606,#205607); +#205606 = CARTESIAN_POINT('',(127.419509,-76.65045,1.51)); +#205607 = VECTOR('',#205608,1.); +#205608 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205609 = PLANE('',#205610); +#205610 = AXIS2_PLACEMENT_3D('',#205611,#205612,#205613); +#205611 = CARTESIAN_POINT('',(127.419509,-76.65045,1.51)); +#205612 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#205613 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205614 = ADVANCED_FACE('',(#205615),#205640,.T.); +#205615 = FACE_BOUND('',#205616,.T.); +#205616 = EDGE_LOOP('',(#205617,#205618,#205626,#205634)); +#205617 = ORIENTED_EDGE('',*,*,#205596,.T.); +#205618 = ORIENTED_EDGE('',*,*,#205619,.T.); +#205619 = EDGE_CURVE('',#205589,#205620,#205622,.T.); +#205620 = VERTEX_POINT('',#205621); +#205621 = CARTESIAN_POINT('',(127.792893,-77.,1.545)); +#205622 = LINE('',#205623,#205624); +#205623 = CARTESIAN_POINT('',(127.455557,-76.665382,1.545)); +#205624 = VECTOR('',#205625,1.); +#205625 = DIRECTION('',(0.709961163418,-0.704240829857,0.)); +#205626 = ORIENTED_EDGE('',*,*,#205627,.F.); +#205627 = EDGE_CURVE('',#205628,#205620,#205630,.T.); +#205628 = VERTEX_POINT('',#205629); +#205629 = CARTESIAN_POINT('',(127.792893,-77.,1.51)); +#205630 = LINE('',#205631,#205632); +#205631 = CARTESIAN_POINT('',(127.792893,-77.,1.51)); +#205632 = VECTOR('',#205633,1.); +#205633 = DIRECTION('',(0.,0.,1.)); +#205634 = ORIENTED_EDGE('',*,*,#205635,.F.); +#205635 = EDGE_CURVE('',#205597,#205628,#205636,.T.); +#205636 = LINE('',#205637,#205638); +#205637 = CARTESIAN_POINT('',(127.455557,-76.665382,1.51)); +#205638 = VECTOR('',#205639,1.); +#205639 = DIRECTION('',(0.709961163418,-0.704240829857,0.)); +#205640 = PLANE('',#205641); +#205641 = AXIS2_PLACEMENT_3D('',#205642,#205643,#205644); +#205642 = CARTESIAN_POINT('',(127.455557,-76.665382,1.51)); +#205643 = DIRECTION('',(0.704240829857,0.709961163418,-0.)); +#205644 = DIRECTION('',(0.709961163418,-0.704240829857,0.)); +#205645 = ADVANCED_FACE('',(#205646),#205671,.T.); +#205646 = FACE_BOUND('',#205647,.T.); +#205647 = EDGE_LOOP('',(#205648,#205649,#205657,#205665)); +#205648 = ORIENTED_EDGE('',*,*,#205627,.T.); +#205649 = ORIENTED_EDGE('',*,*,#205650,.T.); +#205650 = EDGE_CURVE('',#205620,#205651,#205653,.T.); +#205651 = VERTEX_POINT('',#205652); +#205652 = CARTESIAN_POINT('',(128.119509,-77.001921,1.545)); +#205653 = LINE('',#205654,#205655); +#205654 = CARTESIAN_POINT('',(127.792893,-77.,1.545)); +#205655 = VECTOR('',#205656,1.); +#205656 = DIRECTION('',(0.999982704284,-5.881422756156E-03,0.)); +#205657 = ORIENTED_EDGE('',*,*,#205658,.F.); +#205658 = EDGE_CURVE('',#205659,#205651,#205661,.T.); +#205659 = VERTEX_POINT('',#205660); +#205660 = CARTESIAN_POINT('',(128.119509,-77.001921,1.51)); +#205661 = LINE('',#205662,#205663); +#205662 = CARTESIAN_POINT('',(128.119509,-77.001921,1.51)); +#205663 = VECTOR('',#205664,1.); +#205664 = DIRECTION('',(0.,0.,1.)); +#205665 = ORIENTED_EDGE('',*,*,#205666,.F.); +#205666 = EDGE_CURVE('',#205628,#205659,#205667,.T.); +#205667 = LINE('',#205668,#205669); +#205668 = CARTESIAN_POINT('',(127.792893,-77.,1.51)); +#205669 = VECTOR('',#205670,1.); +#205670 = DIRECTION('',(0.999982704284,-5.881422756156E-03,0.)); +#205671 = PLANE('',#205672); +#205672 = AXIS2_PLACEMENT_3D('',#205673,#205674,#205675); +#205673 = CARTESIAN_POINT('',(127.792893,-77.,1.51)); +#205674 = DIRECTION('',(5.881422756156E-03,0.999982704284,-0.)); +#205675 = DIRECTION('',(0.999982704284,-5.881422756156E-03,0.)); +#205676 = ADVANCED_FACE('',(#205677),#205702,.T.); +#205677 = FACE_BOUND('',#205678,.T.); +#205678 = EDGE_LOOP('',(#205679,#205680,#205688,#205696)); +#205679 = ORIENTED_EDGE('',*,*,#205658,.T.); +#205680 = ORIENTED_EDGE('',*,*,#205681,.T.); +#205681 = EDGE_CURVE('',#205651,#205682,#205684,.T.); +#205682 = VERTEX_POINT('',#205683); +#205683 = CARTESIAN_POINT('',(128.155557,-77.016853,1.545)); +#205684 = LINE('',#205685,#205686); +#205685 = CARTESIAN_POINT('',(128.119509,-77.001921,1.545)); +#205686 = VECTOR('',#205687,1.); +#205687 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205688 = ORIENTED_EDGE('',*,*,#205689,.F.); +#205689 = EDGE_CURVE('',#205690,#205682,#205692,.T.); +#205690 = VERTEX_POINT('',#205691); +#205691 = CARTESIAN_POINT('',(128.155557,-77.016853,1.51)); +#205692 = LINE('',#205693,#205694); +#205693 = CARTESIAN_POINT('',(128.155557,-77.016853,1.51)); +#205694 = VECTOR('',#205695,1.); +#205695 = DIRECTION('',(0.,0.,1.)); +#205696 = ORIENTED_EDGE('',*,*,#205697,.F.); +#205697 = EDGE_CURVE('',#205659,#205690,#205698,.T.); +#205698 = LINE('',#205699,#205700); +#205699 = CARTESIAN_POINT('',(128.119509,-77.001921,1.51)); +#205700 = VECTOR('',#205701,1.); +#205701 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205702 = PLANE('',#205703); +#205703 = AXIS2_PLACEMENT_3D('',#205704,#205705,#205706); +#205704 = CARTESIAN_POINT('',(128.119509,-77.001921,1.51)); +#205705 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#205706 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#205707 = ADVANCED_FACE('',(#205708),#205733,.T.); +#205708 = FACE_BOUND('',#205709,.T.); +#205709 = EDGE_LOOP('',(#205710,#205711,#205719,#205727)); +#205710 = ORIENTED_EDGE('',*,*,#205689,.T.); +#205711 = ORIENTED_EDGE('',*,*,#205712,.T.); +#205712 = EDGE_CURVE('',#205682,#205713,#205715,.T.); +#205713 = VERTEX_POINT('',#205714); +#205714 = CARTESIAN_POINT('',(128.391421,-77.25,1.545)); +#205715 = LINE('',#205716,#205717); +#205716 = CARTESIAN_POINT('',(128.155557,-77.016853,1.545)); +#205717 = VECTOR('',#205718,1.); +#205718 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#205719 = ORIENTED_EDGE('',*,*,#205720,.F.); +#205720 = EDGE_CURVE('',#205721,#205713,#205723,.T.); +#205721 = VERTEX_POINT('',#205722); +#205722 = CARTESIAN_POINT('',(128.391421,-77.25,1.51)); +#205723 = LINE('',#205724,#205725); +#205724 = CARTESIAN_POINT('',(128.391421,-77.25,1.51)); +#205725 = VECTOR('',#205726,1.); +#205726 = DIRECTION('',(0.,0.,1.)); +#205727 = ORIENTED_EDGE('',*,*,#205728,.F.); +#205728 = EDGE_CURVE('',#205690,#205721,#205729,.T.); +#205729 = LINE('',#205730,#205731); +#205730 = CARTESIAN_POINT('',(128.155557,-77.016853,1.51)); +#205731 = VECTOR('',#205732,1.); +#205732 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#205733 = PLANE('',#205734); +#205734 = AXIS2_PLACEMENT_3D('',#205735,#205736,#205737); +#205735 = CARTESIAN_POINT('',(128.155557,-77.016853,1.51)); +#205736 = DIRECTION('',(0.702998686558,0.711191146386,-0.)); +#205737 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#205738 = ADVANCED_FACE('',(#205739),#205764,.T.); +#205739 = FACE_BOUND('',#205740,.T.); +#205740 = EDGE_LOOP('',(#205741,#205742,#205750,#205758)); +#205741 = ORIENTED_EDGE('',*,*,#205720,.T.); +#205742 = ORIENTED_EDGE('',*,*,#205743,.T.); +#205743 = EDGE_CURVE('',#205713,#205744,#205746,.T.); +#205744 = VERTEX_POINT('',#205745); +#205745 = CARTESIAN_POINT('',(129.269509,-77.251921,1.545)); +#205746 = LINE('',#205747,#205748); +#205747 = CARTESIAN_POINT('',(128.391421,-77.25,1.545)); +#205748 = VECTOR('',#205749,1.); +#205749 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#205750 = ORIENTED_EDGE('',*,*,#205751,.F.); +#205751 = EDGE_CURVE('',#205752,#205744,#205754,.T.); +#205752 = VERTEX_POINT('',#205753); +#205753 = CARTESIAN_POINT('',(129.269509,-77.251921,1.51)); +#205754 = LINE('',#205755,#205756); +#205755 = CARTESIAN_POINT('',(129.269509,-77.251921,1.51)); +#205756 = VECTOR('',#205757,1.); +#205757 = DIRECTION('',(0.,0.,1.)); +#205758 = ORIENTED_EDGE('',*,*,#205759,.F.); +#205759 = EDGE_CURVE('',#205721,#205752,#205760,.T.); +#205760 = LINE('',#205761,#205762); +#205761 = CARTESIAN_POINT('',(128.391421,-77.25,1.51)); +#205762 = VECTOR('',#205763,1.); +#205763 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#205764 = PLANE('',#205765); +#205765 = AXIS2_PLACEMENT_3D('',#205766,#205767,#205768); +#205766 = CARTESIAN_POINT('',(128.391421,-77.25,1.51)); +#205767 = DIRECTION('',(2.187702602696E-03,0.999997606976,-0.)); +#205768 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#205769 = ADVANCED_FACE('',(#205770),#205797,.T.); +#205770 = FACE_BOUND('',#205771,.T.); +#205771 = EDGE_LOOP('',(#205772,#205773,#205782,#205790)); +#205772 = ORIENTED_EDGE('',*,*,#205751,.T.); +#205773 = ORIENTED_EDGE('',*,*,#205774,.T.); +#205774 = EDGE_CURVE('',#205744,#205775,#205777,.T.); +#205775 = VERTEX_POINT('',#205776); +#205776 = CARTESIAN_POINT('',(129.269509,-77.448079,1.545)); +#205777 = CIRCLE('',#205778,0.100000456609); +#205778 = AXIS2_PLACEMENT_3D('',#205779,#205780,#205781); +#205779 = CARTESIAN_POINT('',(129.25,-77.35,1.545)); +#205780 = DIRECTION('',(0.,0.,-1.)); +#205781 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#205782 = ORIENTED_EDGE('',*,*,#205783,.F.); +#205783 = EDGE_CURVE('',#205784,#205775,#205786,.T.); +#205784 = VERTEX_POINT('',#205785); +#205785 = CARTESIAN_POINT('',(129.269509,-77.448079,1.51)); +#205786 = LINE('',#205787,#205788); +#205787 = CARTESIAN_POINT('',(129.269509,-77.448079,1.51)); +#205788 = VECTOR('',#205789,1.); +#205789 = DIRECTION('',(0.,0.,1.)); +#205790 = ORIENTED_EDGE('',*,*,#205791,.F.); +#205791 = EDGE_CURVE('',#205752,#205784,#205792,.T.); +#205792 = CIRCLE('',#205793,0.100000456609); +#205793 = AXIS2_PLACEMENT_3D('',#205794,#205795,#205796); +#205794 = CARTESIAN_POINT('',(129.25,-77.35,1.51)); +#205795 = DIRECTION('',(0.,0.,-1.)); +#205796 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#205797 = CYLINDRICAL_SURFACE('',#205798,0.100000456609); +#205798 = AXIS2_PLACEMENT_3D('',#205799,#205800,#205801); +#205799 = CARTESIAN_POINT('',(129.25,-77.35,1.51)); +#205800 = DIRECTION('',(0.,0.,-1.)); +#205801 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#205802 = ADVANCED_FACE('',(#205803),#205828,.T.); +#205803 = FACE_BOUND('',#205804,.T.); +#205804 = EDGE_LOOP('',(#205805,#205806,#205814,#205822)); +#205805 = ORIENTED_EDGE('',*,*,#205783,.T.); +#205806 = ORIENTED_EDGE('',*,*,#205807,.T.); +#205807 = EDGE_CURVE('',#205775,#205808,#205810,.T.); +#205808 = VERTEX_POINT('',#205809); +#205809 = CARTESIAN_POINT('',(128.330491,-77.448079,1.545)); +#205810 = LINE('',#205811,#205812); +#205811 = CARTESIAN_POINT('',(129.269509,-77.448079,1.545)); +#205812 = VECTOR('',#205813,1.); +#205813 = DIRECTION('',(-1.,0.,0.)); +#205814 = ORIENTED_EDGE('',*,*,#205815,.F.); +#205815 = EDGE_CURVE('',#205816,#205808,#205818,.T.); +#205816 = VERTEX_POINT('',#205817); +#205817 = CARTESIAN_POINT('',(128.330491,-77.448079,1.51)); +#205818 = LINE('',#205819,#205820); +#205819 = CARTESIAN_POINT('',(128.330491,-77.448079,1.51)); +#205820 = VECTOR('',#205821,1.); +#205821 = DIRECTION('',(0.,0.,1.)); +#205822 = ORIENTED_EDGE('',*,*,#205823,.F.); +#205823 = EDGE_CURVE('',#205784,#205816,#205824,.T.); +#205824 = LINE('',#205825,#205826); +#205825 = CARTESIAN_POINT('',(129.269509,-77.448079,1.51)); +#205826 = VECTOR('',#205827,1.); +#205827 = DIRECTION('',(-1.,0.,0.)); +#205828 = PLANE('',#205829); +#205829 = AXIS2_PLACEMENT_3D('',#205830,#205831,#205832); +#205830 = CARTESIAN_POINT('',(129.269509,-77.448079,1.51)); +#205831 = DIRECTION('',(0.,-1.,0.)); +#205832 = DIRECTION('',(-1.,0.,0.)); +#205833 = ADVANCED_FACE('',(#205834),#205859,.T.); +#205834 = FACE_BOUND('',#205835,.T.); +#205835 = EDGE_LOOP('',(#205836,#205837,#205845,#205853)); +#205836 = ORIENTED_EDGE('',*,*,#205815,.T.); +#205837 = ORIENTED_EDGE('',*,*,#205838,.T.); +#205838 = EDGE_CURVE('',#205808,#205839,#205841,.T.); +#205839 = VERTEX_POINT('',#205840); +#205840 = CARTESIAN_POINT('',(128.294442,-77.433147,1.545)); +#205841 = LINE('',#205842,#205843); +#205842 = CARTESIAN_POINT('',(128.330491,-77.448079,1.545)); +#205843 = VECTOR('',#205844,1.); +#205844 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#205845 = ORIENTED_EDGE('',*,*,#205846,.F.); +#205846 = EDGE_CURVE('',#205847,#205839,#205849,.T.); +#205847 = VERTEX_POINT('',#205848); +#205848 = CARTESIAN_POINT('',(128.294442,-77.433147,1.51)); +#205849 = LINE('',#205850,#205851); +#205850 = CARTESIAN_POINT('',(128.294442,-77.433147,1.51)); +#205851 = VECTOR('',#205852,1.); +#205852 = DIRECTION('',(0.,0.,1.)); +#205853 = ORIENTED_EDGE('',*,*,#205854,.F.); +#205854 = EDGE_CURVE('',#205816,#205847,#205855,.T.); +#205855 = LINE('',#205856,#205857); +#205856 = CARTESIAN_POINT('',(128.330491,-77.448079,1.51)); +#205857 = VECTOR('',#205858,1.); +#205858 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#205859 = PLANE('',#205860); +#205860 = AXIS2_PLACEMENT_3D('',#205861,#205862,#205863); +#205861 = CARTESIAN_POINT('',(128.330491,-77.448079,1.51)); +#205862 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#205863 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#205864 = ADVANCED_FACE('',(#205865),#205890,.T.); +#205865 = FACE_BOUND('',#205866,.T.); +#205866 = EDGE_LOOP('',(#205867,#205868,#205876,#205884)); +#205867 = ORIENTED_EDGE('',*,*,#205846,.T.); +#205868 = ORIENTED_EDGE('',*,*,#205869,.T.); +#205869 = EDGE_CURVE('',#205839,#205870,#205872,.T.); +#205870 = VERTEX_POINT('',#205871); +#205871 = CARTESIAN_POINT('',(128.058578,-77.2,1.545)); +#205872 = LINE('',#205873,#205874); +#205873 = CARTESIAN_POINT('',(128.294442,-77.433147,1.545)); +#205874 = VECTOR('',#205875,1.); +#205875 = DIRECTION('',(-0.711191146386,0.702998686558,0.)); +#205876 = ORIENTED_EDGE('',*,*,#205877,.F.); +#205877 = EDGE_CURVE('',#205878,#205870,#205880,.T.); +#205878 = VERTEX_POINT('',#205879); +#205879 = CARTESIAN_POINT('',(128.058578,-77.2,1.51)); +#205880 = LINE('',#205881,#205882); +#205881 = CARTESIAN_POINT('',(128.058578,-77.2,1.51)); +#205882 = VECTOR('',#205883,1.); +#205883 = DIRECTION('',(0.,0.,1.)); +#205884 = ORIENTED_EDGE('',*,*,#205885,.F.); +#205885 = EDGE_CURVE('',#205847,#205878,#205886,.T.); +#205886 = LINE('',#205887,#205888); +#205887 = CARTESIAN_POINT('',(128.294442,-77.433147,1.51)); +#205888 = VECTOR('',#205889,1.); +#205889 = DIRECTION('',(-0.711191146386,0.702998686558,0.)); +#205890 = PLANE('',#205891); +#205891 = AXIS2_PLACEMENT_3D('',#205892,#205893,#205894); +#205892 = CARTESIAN_POINT('',(128.294442,-77.433147,1.51)); +#205893 = DIRECTION('',(-0.702998686558,-0.711191146386,0.)); +#205894 = DIRECTION('',(-0.711191146386,0.702998686558,0.)); +#205895 = ADVANCED_FACE('',(#205896),#205921,.T.); +#205896 = FACE_BOUND('',#205897,.T.); +#205897 = EDGE_LOOP('',(#205898,#205899,#205907,#205915)); +#205898 = ORIENTED_EDGE('',*,*,#205877,.T.); +#205899 = ORIENTED_EDGE('',*,*,#205900,.T.); +#205900 = EDGE_CURVE('',#205870,#205901,#205903,.T.); +#205901 = VERTEX_POINT('',#205902); +#205902 = CARTESIAN_POINT('',(127.731962,-77.198079,1.545)); +#205903 = LINE('',#205904,#205905); +#205904 = CARTESIAN_POINT('',(128.058578,-77.2,1.545)); +#205905 = VECTOR('',#205906,1.); +#205906 = DIRECTION('',(-0.999982704284,5.881422756156E-03,0.)); +#205907 = ORIENTED_EDGE('',*,*,#205908,.F.); +#205908 = EDGE_CURVE('',#205909,#205901,#205911,.T.); +#205909 = VERTEX_POINT('',#205910); +#205910 = CARTESIAN_POINT('',(127.731962,-77.198079,1.51)); +#205911 = LINE('',#205912,#205913); +#205912 = CARTESIAN_POINT('',(127.731962,-77.198079,1.51)); +#205913 = VECTOR('',#205914,1.); +#205914 = DIRECTION('',(0.,0.,1.)); +#205915 = ORIENTED_EDGE('',*,*,#205916,.F.); +#205916 = EDGE_CURVE('',#205878,#205909,#205917,.T.); +#205917 = LINE('',#205918,#205919); +#205918 = CARTESIAN_POINT('',(128.058578,-77.2,1.51)); +#205919 = VECTOR('',#205920,1.); +#205920 = DIRECTION('',(-0.999982704284,5.881422756156E-03,0.)); +#205921 = PLANE('',#205922); +#205922 = AXIS2_PLACEMENT_3D('',#205923,#205924,#205925); +#205923 = CARTESIAN_POINT('',(128.058578,-77.2,1.51)); +#205924 = DIRECTION('',(-5.881422756156E-03,-0.999982704284,0.)); +#205925 = DIRECTION('',(-0.999982704284,5.881422756156E-03,0.)); +#205926 = ADVANCED_FACE('',(#205927),#205952,.T.); +#205927 = FACE_BOUND('',#205928,.T.); +#205928 = EDGE_LOOP('',(#205929,#205930,#205938,#205946)); +#205929 = ORIENTED_EDGE('',*,*,#205908,.T.); +#205930 = ORIENTED_EDGE('',*,*,#205931,.T.); +#205931 = EDGE_CURVE('',#205901,#205932,#205934,.T.); +#205932 = VERTEX_POINT('',#205933); +#205933 = CARTESIAN_POINT('',(127.695914,-77.183147,1.545)); +#205934 = LINE('',#205935,#205936); +#205935 = CARTESIAN_POINT('',(127.731962,-77.198079,1.545)); +#205936 = VECTOR('',#205937,1.); +#205937 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#205938 = ORIENTED_EDGE('',*,*,#205939,.F.); +#205939 = EDGE_CURVE('',#205940,#205932,#205942,.T.); +#205940 = VERTEX_POINT('',#205941); +#205941 = CARTESIAN_POINT('',(127.695914,-77.183147,1.51)); +#205942 = LINE('',#205943,#205944); +#205943 = CARTESIAN_POINT('',(127.695914,-77.183147,1.51)); +#205944 = VECTOR('',#205945,1.); +#205945 = DIRECTION('',(0.,0.,1.)); +#205946 = ORIENTED_EDGE('',*,*,#205947,.F.); +#205947 = EDGE_CURVE('',#205909,#205940,#205948,.T.); +#205948 = LINE('',#205949,#205950); +#205949 = CARTESIAN_POINT('',(127.731962,-77.198079,1.51)); +#205950 = VECTOR('',#205951,1.); +#205951 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#205952 = PLANE('',#205953); +#205953 = AXIS2_PLACEMENT_3D('',#205954,#205955,#205956); +#205954 = CARTESIAN_POINT('',(127.731962,-77.198079,1.51)); +#205955 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#205956 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#205957 = ADVANCED_FACE('',(#205958),#205983,.T.); +#205958 = FACE_BOUND('',#205959,.T.); +#205959 = EDGE_LOOP('',(#205960,#205961,#205969,#205977)); +#205960 = ORIENTED_EDGE('',*,*,#205939,.T.); +#205961 = ORIENTED_EDGE('',*,*,#205962,.T.); +#205962 = EDGE_CURVE('',#205932,#205963,#205965,.T.); +#205963 = VERTEX_POINT('',#205964); +#205964 = CARTESIAN_POINT('',(127.358578,-76.848529,1.545)); +#205965 = LINE('',#205966,#205967); +#205966 = CARTESIAN_POINT('',(127.695914,-77.183147,1.545)); +#205967 = VECTOR('',#205968,1.); +#205968 = DIRECTION('',(-0.709961163418,0.704240829857,0.)); +#205969 = ORIENTED_EDGE('',*,*,#205970,.F.); +#205970 = EDGE_CURVE('',#205971,#205963,#205973,.T.); +#205971 = VERTEX_POINT('',#205972); +#205972 = CARTESIAN_POINT('',(127.358578,-76.848529,1.51)); +#205973 = LINE('',#205974,#205975); +#205974 = CARTESIAN_POINT('',(127.358578,-76.848529,1.51)); +#205975 = VECTOR('',#205976,1.); +#205976 = DIRECTION('',(0.,0.,1.)); +#205977 = ORIENTED_EDGE('',*,*,#205978,.F.); +#205978 = EDGE_CURVE('',#205940,#205971,#205979,.T.); +#205979 = LINE('',#205980,#205981); +#205980 = CARTESIAN_POINT('',(127.695914,-77.183147,1.51)); +#205981 = VECTOR('',#205982,1.); +#205982 = DIRECTION('',(-0.709961163418,0.704240829857,0.)); +#205983 = PLANE('',#205984); +#205984 = AXIS2_PLACEMENT_3D('',#205985,#205986,#205987); +#205985 = CARTESIAN_POINT('',(127.695914,-77.183147,1.51)); +#205986 = DIRECTION('',(-0.704240829857,-0.709961163418,0.)); +#205987 = DIRECTION('',(-0.709961163418,0.704240829857,0.)); +#205988 = ADVANCED_FACE('',(#205989),#206014,.T.); +#205989 = FACE_BOUND('',#205990,.T.); +#205990 = EDGE_LOOP('',(#205991,#205992,#206000,#206008)); +#205991 = ORIENTED_EDGE('',*,*,#205970,.T.); +#205992 = ORIENTED_EDGE('',*,*,#205993,.T.); +#205993 = EDGE_CURVE('',#205963,#205994,#205996,.T.); +#205994 = VERTEX_POINT('',#205995); +#205995 = CARTESIAN_POINT('',(126.994134,-76.848529,1.545)); +#205996 = LINE('',#205997,#205998); +#205997 = CARTESIAN_POINT('',(127.358578,-76.848529,1.545)); +#205998 = VECTOR('',#205999,1.); +#205999 = DIRECTION('',(-1.,0.,0.)); +#206000 = ORIENTED_EDGE('',*,*,#206001,.F.); +#206001 = EDGE_CURVE('',#206002,#205994,#206004,.T.); +#206002 = VERTEX_POINT('',#206003); +#206003 = CARTESIAN_POINT('',(126.994134,-76.848529,1.51)); +#206004 = LINE('',#206005,#206006); +#206005 = CARTESIAN_POINT('',(126.994134,-76.848529,1.51)); +#206006 = VECTOR('',#206007,1.); +#206007 = DIRECTION('',(0.,0.,1.)); +#206008 = ORIENTED_EDGE('',*,*,#206009,.F.); +#206009 = EDGE_CURVE('',#205971,#206002,#206010,.T.); +#206010 = LINE('',#206011,#206012); +#206011 = CARTESIAN_POINT('',(127.358578,-76.848529,1.51)); +#206012 = VECTOR('',#206013,1.); +#206013 = DIRECTION('',(-1.,0.,0.)); +#206014 = PLANE('',#206015); +#206015 = AXIS2_PLACEMENT_3D('',#206016,#206017,#206018); +#206016 = CARTESIAN_POINT('',(127.358578,-76.848529,1.51)); +#206017 = DIRECTION('',(0.,-1.,0.)); +#206018 = DIRECTION('',(-1.,0.,0.)); +#206019 = ADVANCED_FACE('',(#206020),#206045,.T.); +#206020 = FACE_BOUND('',#206021,.T.); +#206021 = EDGE_LOOP('',(#206022,#206023,#206031,#206039)); +#206022 = ORIENTED_EDGE('',*,*,#206001,.T.); +#206023 = ORIENTED_EDGE('',*,*,#206024,.T.); +#206024 = EDGE_CURVE('',#205994,#206025,#206027,.T.); +#206025 = VERTEX_POINT('',#206026); +#206026 = CARTESIAN_POINT('',(126.997433,-76.939158,1.545)); +#206027 = LINE('',#206028,#206029); +#206028 = CARTESIAN_POINT('',(126.994134,-76.848529,1.545)); +#206029 = VECTOR('',#206030,1.); +#206030 = DIRECTION('',(3.637705932783E-02,-0.999338135745,0.)); +#206031 = ORIENTED_EDGE('',*,*,#206032,.F.); +#206032 = EDGE_CURVE('',#206033,#206025,#206035,.T.); +#206033 = VERTEX_POINT('',#206034); +#206034 = CARTESIAN_POINT('',(126.997433,-76.939158,1.51)); +#206035 = LINE('',#206036,#206037); +#206036 = CARTESIAN_POINT('',(126.997433,-76.939158,1.51)); +#206037 = VECTOR('',#206038,1.); +#206038 = DIRECTION('',(0.,0.,1.)); +#206039 = ORIENTED_EDGE('',*,*,#206040,.F.); +#206040 = EDGE_CURVE('',#206002,#206033,#206041,.T.); +#206041 = LINE('',#206042,#206043); +#206042 = CARTESIAN_POINT('',(126.994134,-76.848529,1.51)); +#206043 = VECTOR('',#206044,1.); +#206044 = DIRECTION('',(3.637705932783E-02,-0.999338135745,0.)); +#206045 = PLANE('',#206046); +#206046 = AXIS2_PLACEMENT_3D('',#206047,#206048,#206049); +#206047 = CARTESIAN_POINT('',(126.994134,-76.848529,1.51)); +#206048 = DIRECTION('',(0.999338135745,3.637705932783E-02,-0.)); +#206049 = DIRECTION('',(3.637705932783E-02,-0.999338135745,0.)); +#206050 = ADVANCED_FACE('',(#206051),#206078,.T.); +#206051 = FACE_BOUND('',#206052,.T.); +#206052 = EDGE_LOOP('',(#206053,#206054,#206063,#206071)); +#206053 = ORIENTED_EDGE('',*,*,#206032,.T.); +#206054 = ORIENTED_EDGE('',*,*,#206055,.T.); +#206055 = EDGE_CURVE('',#206025,#206056,#206058,.T.); +#206056 = VERTEX_POINT('',#206057); +#206057 = CARTESIAN_POINT('',(126.814805,-76.622836,1.545)); +#206058 = CIRCLE('',#206059,0.299999873664); +#206059 = AXIS2_PLACEMENT_3D('',#206060,#206061,#206062); +#206060 = CARTESIAN_POINT('',(126.69999973694,-76.89999962635,1.545)); +#206061 = DIRECTION('',(-0.,0.,-1.)); +#206062 = DIRECTION('',(0.991444627702,-0.130527967125,-0.)); +#206063 = ORIENTED_EDGE('',*,*,#206064,.F.); +#206064 = EDGE_CURVE('',#206065,#206056,#206067,.T.); +#206065 = VERTEX_POINT('',#206066); +#206066 = CARTESIAN_POINT('',(126.814805,-76.622836,1.51)); +#206067 = LINE('',#206068,#206069); +#206068 = CARTESIAN_POINT('',(126.814805,-76.622836,1.51)); +#206069 = VECTOR('',#206070,1.); +#206070 = DIRECTION('',(0.,0.,1.)); +#206071 = ORIENTED_EDGE('',*,*,#206072,.F.); +#206072 = EDGE_CURVE('',#206033,#206065,#206073,.T.); +#206073 = CIRCLE('',#206074,0.299999873664); +#206074 = AXIS2_PLACEMENT_3D('',#206075,#206076,#206077); +#206075 = CARTESIAN_POINT('',(126.69999973694,-76.89999962635,1.51)); +#206076 = DIRECTION('',(-0.,0.,-1.)); +#206077 = DIRECTION('',(0.991444627702,-0.130527967125,-0.)); +#206078 = CYLINDRICAL_SURFACE('',#206079,0.299999873664); +#206079 = AXIS2_PLACEMENT_3D('',#206080,#206081,#206082); +#206080 = CARTESIAN_POINT('',(126.69999973694,-76.89999962635,1.51)); +#206081 = DIRECTION('',(-0.,0.,-1.)); +#206082 = DIRECTION('',(0.991444627702,-0.130527967125,-0.)); +#206083 = ADVANCED_FACE('',(#206084),#206100,.T.); +#206084 = FACE_BOUND('',#206085,.T.); +#206085 = EDGE_LOOP('',(#206086,#206087,#206093,#206094)); +#206086 = ORIENTED_EDGE('',*,*,#206064,.T.); +#206087 = ORIENTED_EDGE('',*,*,#206088,.T.); +#206088 = EDGE_CURVE('',#206056,#205550,#206089,.T.); +#206089 = LINE('',#206090,#206091); +#206090 = CARTESIAN_POINT('',(126.814805,-76.622836,1.545)); +#206091 = VECTOR('',#206092,1.); +#206092 = DIRECTION('',(0.866022575157,-0.500004899294,0.)); +#206093 = ORIENTED_EDGE('',*,*,#205547,.F.); +#206094 = ORIENTED_EDGE('',*,*,#206095,.F.); +#206095 = EDGE_CURVE('',#206065,#205548,#206096,.T.); +#206096 = LINE('',#206097,#206098); +#206097 = CARTESIAN_POINT('',(126.814805,-76.622836,1.51)); +#206098 = VECTOR('',#206099,1.); +#206099 = DIRECTION('',(0.866022575157,-0.500004899294,0.)); +#206100 = PLANE('',#206101); +#206101 = AXIS2_PLACEMENT_3D('',#206102,#206103,#206104); +#206102 = CARTESIAN_POINT('',(126.814805,-76.622836,1.51)); +#206103 = DIRECTION('',(0.500004899294,0.866022575157,-0.)); +#206104 = DIRECTION('',(0.866022575157,-0.500004899294,0.)); +#206105 = ADVANCED_FACE('',(#206106),#206133,.F.); +#206106 = FACE_BOUND('',#206107,.T.); +#206107 = EDGE_LOOP('',(#206108,#206118,#206125,#206126)); +#206108 = ORIENTED_EDGE('',*,*,#206109,.T.); +#206109 = EDGE_CURVE('',#206110,#206112,#206114,.T.); +#206110 = VERTEX_POINT('',#206111); +#206111 = CARTESIAN_POINT('',(126.837255,-76.9,1.51)); +#206112 = VERTEX_POINT('',#206113); +#206113 = CARTESIAN_POINT('',(126.837255,-76.9,1.545)); +#206114 = LINE('',#206115,#206116); +#206115 = CARTESIAN_POINT('',(126.837255,-76.9,1.51)); +#206116 = VECTOR('',#206117,1.); +#206117 = DIRECTION('',(0.,0.,1.)); +#206118 = ORIENTED_EDGE('',*,*,#206119,.T.); +#206119 = EDGE_CURVE('',#206112,#206112,#206120,.T.); +#206120 = CIRCLE('',#206121,0.137255); +#206121 = AXIS2_PLACEMENT_3D('',#206122,#206123,#206124); +#206122 = CARTESIAN_POINT('',(126.7,-76.9,1.545)); +#206123 = DIRECTION('',(0.,0.,1.)); +#206124 = DIRECTION('',(1.,0.,-0.)); +#206125 = ORIENTED_EDGE('',*,*,#206109,.F.); +#206126 = ORIENTED_EDGE('',*,*,#206127,.F.); +#206127 = EDGE_CURVE('',#206110,#206110,#206128,.T.); +#206128 = CIRCLE('',#206129,0.137255); +#206129 = AXIS2_PLACEMENT_3D('',#206130,#206131,#206132); +#206130 = CARTESIAN_POINT('',(126.7,-76.9,1.51)); +#206131 = DIRECTION('',(0.,0.,1.)); +#206132 = DIRECTION('',(1.,0.,-0.)); +#206133 = CYLINDRICAL_SURFACE('',#206134,0.137255); +#206134 = AXIS2_PLACEMENT_3D('',#206135,#206136,#206137); +#206135 = CARTESIAN_POINT('',(126.7,-76.9,1.51)); +#206136 = DIRECTION('',(-0.,-0.,-1.)); +#206137 = DIRECTION('',(1.,0.,-0.)); +#206138 = ADVANCED_FACE('',(#206139,#206159),#206162,.F.); +#206139 = FACE_BOUND('',#206140,.T.); +#206140 = EDGE_LOOP('',(#206141,#206142,#206143,#206144,#206145,#206146, + #206147,#206148,#206149,#206150,#206151,#206152,#206153,#206154, + #206155,#206156,#206157,#206158)); +#206141 = ORIENTED_EDGE('',*,*,#205573,.T.); +#206142 = ORIENTED_EDGE('',*,*,#205604,.T.); +#206143 = ORIENTED_EDGE('',*,*,#205635,.T.); +#206144 = ORIENTED_EDGE('',*,*,#205666,.T.); +#206145 = ORIENTED_EDGE('',*,*,#205697,.T.); +#206146 = ORIENTED_EDGE('',*,*,#205728,.T.); +#206147 = ORIENTED_EDGE('',*,*,#205759,.T.); +#206148 = ORIENTED_EDGE('',*,*,#205791,.T.); +#206149 = ORIENTED_EDGE('',*,*,#205823,.T.); +#206150 = ORIENTED_EDGE('',*,*,#205854,.T.); +#206151 = ORIENTED_EDGE('',*,*,#205885,.T.); +#206152 = ORIENTED_EDGE('',*,*,#205916,.T.); +#206153 = ORIENTED_EDGE('',*,*,#205947,.T.); +#206154 = ORIENTED_EDGE('',*,*,#205978,.T.); +#206155 = ORIENTED_EDGE('',*,*,#206009,.T.); +#206156 = ORIENTED_EDGE('',*,*,#206040,.T.); +#206157 = ORIENTED_EDGE('',*,*,#206072,.T.); +#206158 = ORIENTED_EDGE('',*,*,#206095,.T.); +#206159 = FACE_BOUND('',#206160,.T.); +#206160 = EDGE_LOOP('',(#206161)); +#206161 = ORIENTED_EDGE('',*,*,#206127,.T.); +#206162 = PLANE('',#206163); +#206163 = AXIS2_PLACEMENT_3D('',#206164,#206165,#206166); +#206164 = CARTESIAN_POINT('',(0.,0.,1.51)); +#206165 = DIRECTION('',(0.,0.,1.)); +#206166 = DIRECTION('',(1.,0.,-0.)); +#206167 = ADVANCED_FACE('',(#206168,#206188),#206191,.T.); +#206168 = FACE_BOUND('',#206169,.F.); +#206169 = EDGE_LOOP('',(#206170,#206171,#206172,#206173,#206174,#206175, + #206176,#206177,#206178,#206179,#206180,#206181,#206182,#206183, + #206184,#206185,#206186,#206187)); +#206170 = ORIENTED_EDGE('',*,*,#205557,.T.); +#206171 = ORIENTED_EDGE('',*,*,#205588,.T.); +#206172 = ORIENTED_EDGE('',*,*,#205619,.T.); +#206173 = ORIENTED_EDGE('',*,*,#205650,.T.); +#206174 = ORIENTED_EDGE('',*,*,#205681,.T.); +#206175 = ORIENTED_EDGE('',*,*,#205712,.T.); +#206176 = ORIENTED_EDGE('',*,*,#205743,.T.); +#206177 = ORIENTED_EDGE('',*,*,#205774,.T.); +#206178 = ORIENTED_EDGE('',*,*,#205807,.T.); +#206179 = ORIENTED_EDGE('',*,*,#205838,.T.); +#206180 = ORIENTED_EDGE('',*,*,#205869,.T.); +#206181 = ORIENTED_EDGE('',*,*,#205900,.T.); +#206182 = ORIENTED_EDGE('',*,*,#205931,.T.); +#206183 = ORIENTED_EDGE('',*,*,#205962,.T.); +#206184 = ORIENTED_EDGE('',*,*,#205993,.T.); +#206185 = ORIENTED_EDGE('',*,*,#206024,.T.); +#206186 = ORIENTED_EDGE('',*,*,#206055,.T.); +#206187 = ORIENTED_EDGE('',*,*,#206088,.T.); +#206188 = FACE_BOUND('',#206189,.F.); +#206189 = EDGE_LOOP('',(#206190)); +#206190 = ORIENTED_EDGE('',*,*,#206119,.T.); +#206191 = PLANE('',#206192); +#206192 = AXIS2_PLACEMENT_3D('',#206193,#206194,#206195); +#206193 = CARTESIAN_POINT('',(0.,0.,1.545)); +#206194 = DIRECTION('',(0.,0.,1.)); +#206195 = DIRECTION('',(1.,0.,-0.)); +#206196 = MANIFOLD_SOLID_BREP('',#206197); +#206197 = CLOSED_SHELL('',(#206198,#206238,#206269,#206300,#206331, + #206362,#206393,#206424,#206455,#206486,#206517,#206548,#206579, + #206610,#206641,#206672,#206703,#206734,#206765,#206798,#206829, + #206860,#206891,#206922,#206953,#206984,#207015,#207046,#207077, + #207108,#207139,#207170,#207201,#207232,#207263,#207294,#207325, + #207358,#207389,#207420,#207451,#207482,#207515,#207546,#207577, + #207608,#207639,#207670,#207701,#207732,#207754,#207787,#207848)); +#206198 = ADVANCED_FACE('',(#206199),#206233,.T.); +#206199 = FACE_BOUND('',#206200,.T.); +#206200 = EDGE_LOOP('',(#206201,#206211,#206219,#206227)); +#206201 = ORIENTED_EDGE('',*,*,#206202,.T.); +#206202 = EDGE_CURVE('',#206203,#206205,#206207,.T.); +#206203 = VERTEX_POINT('',#206204); +#206204 = CARTESIAN_POINT('',(122.669443,-61.366853,1.51)); +#206205 = VERTEX_POINT('',#206206); +#206206 = CARTESIAN_POINT('',(122.669443,-61.366853,1.545)); +#206207 = LINE('',#206208,#206209); +#206208 = CARTESIAN_POINT('',(122.669443,-61.366853,1.51)); +#206209 = VECTOR('',#206210,1.); +#206210 = DIRECTION('',(0.,0.,1.)); +#206211 = ORIENTED_EDGE('',*,*,#206212,.T.); +#206212 = EDGE_CURVE('',#206205,#206213,#206215,.T.); +#206213 = VERTEX_POINT('',#206214); +#206214 = CARTESIAN_POINT('',(122.705491,-61.351921,1.545)); +#206215 = LINE('',#206216,#206217); +#206216 = CARTESIAN_POINT('',(122.669443,-61.366853,1.545)); +#206217 = VECTOR('',#206218,1.); +#206218 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206219 = ORIENTED_EDGE('',*,*,#206220,.F.); +#206220 = EDGE_CURVE('',#206221,#206213,#206223,.T.); +#206221 = VERTEX_POINT('',#206222); +#206222 = CARTESIAN_POINT('',(122.705491,-61.351921,1.51)); +#206223 = LINE('',#206224,#206225); +#206224 = CARTESIAN_POINT('',(122.705491,-61.351921,1.51)); +#206225 = VECTOR('',#206226,1.); +#206226 = DIRECTION('',(0.,0.,1.)); +#206227 = ORIENTED_EDGE('',*,*,#206228,.F.); +#206228 = EDGE_CURVE('',#206203,#206221,#206229,.T.); +#206229 = LINE('',#206230,#206231); +#206230 = CARTESIAN_POINT('',(122.669443,-61.366853,1.51)); +#206231 = VECTOR('',#206232,1.); +#206232 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206233 = PLANE('',#206234); +#206234 = AXIS2_PLACEMENT_3D('',#206235,#206236,#206237); +#206235 = CARTESIAN_POINT('',(122.669443,-61.366853,1.51)); +#206236 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#206237 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206238 = ADVANCED_FACE('',(#206239),#206264,.T.); +#206239 = FACE_BOUND('',#206240,.T.); +#206240 = EDGE_LOOP('',(#206241,#206242,#206250,#206258)); +#206241 = ORIENTED_EDGE('',*,*,#206220,.T.); +#206242 = ORIENTED_EDGE('',*,*,#206243,.T.); +#206243 = EDGE_CURVE('',#206213,#206244,#206246,.T.); +#206244 = VERTEX_POINT('',#206245); +#206245 = CARTESIAN_POINT('',(124.594509,-61.351921,1.545)); +#206246 = LINE('',#206247,#206248); +#206247 = CARTESIAN_POINT('',(122.705491,-61.351921,1.545)); +#206248 = VECTOR('',#206249,1.); +#206249 = DIRECTION('',(1.,0.,0.)); +#206250 = ORIENTED_EDGE('',*,*,#206251,.F.); +#206251 = EDGE_CURVE('',#206252,#206244,#206254,.T.); +#206252 = VERTEX_POINT('',#206253); +#206253 = CARTESIAN_POINT('',(124.594509,-61.351921,1.51)); +#206254 = LINE('',#206255,#206256); +#206255 = CARTESIAN_POINT('',(124.594509,-61.351921,1.51)); +#206256 = VECTOR('',#206257,1.); +#206257 = DIRECTION('',(0.,0.,1.)); +#206258 = ORIENTED_EDGE('',*,*,#206259,.F.); +#206259 = EDGE_CURVE('',#206221,#206252,#206260,.T.); +#206260 = LINE('',#206261,#206262); +#206261 = CARTESIAN_POINT('',(122.705491,-61.351921,1.51)); +#206262 = VECTOR('',#206263,1.); +#206263 = DIRECTION('',(1.,0.,0.)); +#206264 = PLANE('',#206265); +#206265 = AXIS2_PLACEMENT_3D('',#206266,#206267,#206268); +#206266 = CARTESIAN_POINT('',(122.705491,-61.351921,1.51)); +#206267 = DIRECTION('',(0.,1.,0.)); +#206268 = DIRECTION('',(1.,0.,0.)); +#206269 = ADVANCED_FACE('',(#206270),#206295,.T.); +#206270 = FACE_BOUND('',#206271,.T.); +#206271 = EDGE_LOOP('',(#206272,#206273,#206281,#206289)); +#206272 = ORIENTED_EDGE('',*,*,#206251,.T.); +#206273 = ORIENTED_EDGE('',*,*,#206274,.T.); +#206274 = EDGE_CURVE('',#206244,#206275,#206277,.T.); +#206275 = VERTEX_POINT('',#206276); +#206276 = CARTESIAN_POINT('',(124.630557,-61.366853,1.545)); +#206277 = LINE('',#206278,#206279); +#206278 = CARTESIAN_POINT('',(124.594509,-61.351921,1.545)); +#206279 = VECTOR('',#206280,1.); +#206280 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206281 = ORIENTED_EDGE('',*,*,#206282,.F.); +#206282 = EDGE_CURVE('',#206283,#206275,#206285,.T.); +#206283 = VERTEX_POINT('',#206284); +#206284 = CARTESIAN_POINT('',(124.630557,-61.366853,1.51)); +#206285 = LINE('',#206286,#206287); +#206286 = CARTESIAN_POINT('',(124.630557,-61.366853,1.51)); +#206287 = VECTOR('',#206288,1.); +#206288 = DIRECTION('',(0.,0.,1.)); +#206289 = ORIENTED_EDGE('',*,*,#206290,.F.); +#206290 = EDGE_CURVE('',#206252,#206283,#206291,.T.); +#206291 = LINE('',#206292,#206293); +#206292 = CARTESIAN_POINT('',(124.594509,-61.351921,1.51)); +#206293 = VECTOR('',#206294,1.); +#206294 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206295 = PLANE('',#206296); +#206296 = AXIS2_PLACEMENT_3D('',#206297,#206298,#206299); +#206297 = CARTESIAN_POINT('',(124.594509,-61.351921,1.51)); +#206298 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#206299 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206300 = ADVANCED_FACE('',(#206301),#206326,.T.); +#206301 = FACE_BOUND('',#206302,.T.); +#206302 = EDGE_LOOP('',(#206303,#206304,#206312,#206320)); +#206303 = ORIENTED_EDGE('',*,*,#206282,.T.); +#206304 = ORIENTED_EDGE('',*,*,#206305,.T.); +#206305 = EDGE_CURVE('',#206275,#206306,#206308,.T.); +#206306 = VERTEX_POINT('',#206307); +#206307 = CARTESIAN_POINT('',(124.958147,-61.694443,1.545)); +#206308 = LINE('',#206309,#206310); +#206309 = CARTESIAN_POINT('',(124.630557,-61.366853,1.545)); +#206310 = VECTOR('',#206311,1.); +#206311 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206312 = ORIENTED_EDGE('',*,*,#206313,.F.); +#206313 = EDGE_CURVE('',#206314,#206306,#206316,.T.); +#206314 = VERTEX_POINT('',#206315); +#206315 = CARTESIAN_POINT('',(124.958147,-61.694443,1.51)); +#206316 = LINE('',#206317,#206318); +#206317 = CARTESIAN_POINT('',(124.958147,-61.694443,1.51)); +#206318 = VECTOR('',#206319,1.); +#206319 = DIRECTION('',(0.,0.,1.)); +#206320 = ORIENTED_EDGE('',*,*,#206321,.F.); +#206321 = EDGE_CURVE('',#206283,#206314,#206322,.T.); +#206322 = LINE('',#206323,#206324); +#206323 = CARTESIAN_POINT('',(124.630557,-61.366853,1.51)); +#206324 = VECTOR('',#206325,1.); +#206325 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206326 = PLANE('',#206327); +#206327 = AXIS2_PLACEMENT_3D('',#206328,#206329,#206330); +#206328 = CARTESIAN_POINT('',(124.630557,-61.366853,1.51)); +#206329 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#206330 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206331 = ADVANCED_FACE('',(#206332),#206357,.T.); +#206332 = FACE_BOUND('',#206333,.T.); +#206333 = EDGE_LOOP('',(#206334,#206335,#206343,#206351)); +#206334 = ORIENTED_EDGE('',*,*,#206313,.T.); +#206335 = ORIENTED_EDGE('',*,*,#206336,.T.); +#206336 = EDGE_CURVE('',#206306,#206337,#206339,.T.); +#206337 = VERTEX_POINT('',#206338); +#206338 = CARTESIAN_POINT('',(124.973079,-61.730491,1.545)); +#206339 = LINE('',#206340,#206341); +#206340 = CARTESIAN_POINT('',(124.958147,-61.694443,1.545)); +#206341 = VECTOR('',#206342,1.); +#206342 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206343 = ORIENTED_EDGE('',*,*,#206344,.F.); +#206344 = EDGE_CURVE('',#206345,#206337,#206347,.T.); +#206345 = VERTEX_POINT('',#206346); +#206346 = CARTESIAN_POINT('',(124.973079,-61.730491,1.51)); +#206347 = LINE('',#206348,#206349); +#206348 = CARTESIAN_POINT('',(124.973079,-61.730491,1.51)); +#206349 = VECTOR('',#206350,1.); +#206350 = DIRECTION('',(0.,0.,1.)); +#206351 = ORIENTED_EDGE('',*,*,#206352,.F.); +#206352 = EDGE_CURVE('',#206314,#206345,#206353,.T.); +#206353 = LINE('',#206354,#206355); +#206354 = CARTESIAN_POINT('',(124.958147,-61.694443,1.51)); +#206355 = VECTOR('',#206356,1.); +#206356 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206357 = PLANE('',#206358); +#206358 = AXIS2_PLACEMENT_3D('',#206359,#206360,#206361); +#206359 = CARTESIAN_POINT('',(124.958147,-61.694443,1.51)); +#206360 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#206361 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206362 = ADVANCED_FACE('',(#206363),#206388,.T.); +#206363 = FACE_BOUND('',#206364,.T.); +#206364 = EDGE_LOOP('',(#206365,#206366,#206374,#206382)); +#206365 = ORIENTED_EDGE('',*,*,#206344,.T.); +#206366 = ORIENTED_EDGE('',*,*,#206367,.T.); +#206367 = EDGE_CURVE('',#206337,#206368,#206370,.T.); +#206368 = VERTEX_POINT('',#206369); +#206369 = CARTESIAN_POINT('',(124.975,-62.608578,1.545)); +#206370 = LINE('',#206371,#206372); +#206371 = CARTESIAN_POINT('',(124.973079,-61.730491,1.545)); +#206372 = VECTOR('',#206373,1.); +#206373 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#206374 = ORIENTED_EDGE('',*,*,#206375,.F.); +#206375 = EDGE_CURVE('',#206376,#206368,#206378,.T.); +#206376 = VERTEX_POINT('',#206377); +#206377 = CARTESIAN_POINT('',(124.975,-62.608578,1.51)); +#206378 = LINE('',#206379,#206380); +#206379 = CARTESIAN_POINT('',(124.975,-62.608578,1.51)); +#206380 = VECTOR('',#206381,1.); +#206381 = DIRECTION('',(0.,0.,1.)); +#206382 = ORIENTED_EDGE('',*,*,#206383,.F.); +#206383 = EDGE_CURVE('',#206345,#206376,#206384,.T.); +#206384 = LINE('',#206385,#206386); +#206385 = CARTESIAN_POINT('',(124.973079,-61.730491,1.51)); +#206386 = VECTOR('',#206387,1.); +#206387 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#206388 = PLANE('',#206389); +#206389 = AXIS2_PLACEMENT_3D('',#206390,#206391,#206392); +#206390 = CARTESIAN_POINT('',(124.973079,-61.730491,1.51)); +#206391 = DIRECTION('',(0.99999760697,2.187705094126E-03,-0.)); +#206392 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#206393 = ADVANCED_FACE('',(#206394),#206419,.T.); +#206394 = FACE_BOUND('',#206395,.T.); +#206395 = EDGE_LOOP('',(#206396,#206397,#206405,#206413)); +#206396 = ORIENTED_EDGE('',*,*,#206375,.T.); +#206397 = ORIENTED_EDGE('',*,*,#206398,.T.); +#206398 = EDGE_CURVE('',#206368,#206399,#206401,.T.); +#206399 = VERTEX_POINT('',#206400); +#206400 = CARTESIAN_POINT('',(125.476421,-63.11,1.545)); +#206401 = LINE('',#206402,#206403); +#206402 = CARTESIAN_POINT('',(124.975,-62.608578,1.545)); +#206403 = VECTOR('',#206404,1.); +#206404 = DIRECTION('',(0.707106076084,-0.707107486288,0.)); +#206405 = ORIENTED_EDGE('',*,*,#206406,.F.); +#206406 = EDGE_CURVE('',#206407,#206399,#206409,.T.); +#206407 = VERTEX_POINT('',#206408); +#206408 = CARTESIAN_POINT('',(125.476421,-63.11,1.51)); +#206409 = LINE('',#206410,#206411); +#206410 = CARTESIAN_POINT('',(125.476421,-63.11,1.51)); +#206411 = VECTOR('',#206412,1.); +#206412 = DIRECTION('',(0.,0.,1.)); +#206413 = ORIENTED_EDGE('',*,*,#206414,.F.); +#206414 = EDGE_CURVE('',#206376,#206407,#206415,.T.); +#206415 = LINE('',#206416,#206417); +#206416 = CARTESIAN_POINT('',(124.975,-62.608578,1.51)); +#206417 = VECTOR('',#206418,1.); +#206418 = DIRECTION('',(0.707106076084,-0.707107486288,0.)); +#206419 = PLANE('',#206420); +#206420 = AXIS2_PLACEMENT_3D('',#206421,#206422,#206423); +#206421 = CARTESIAN_POINT('',(124.975,-62.608578,1.51)); +#206422 = DIRECTION('',(0.707107486288,0.707106076084,-0.)); +#206423 = DIRECTION('',(0.707106076084,-0.707107486288,0.)); +#206424 = ADVANCED_FACE('',(#206425),#206450,.T.); +#206425 = FACE_BOUND('',#206426,.T.); +#206426 = EDGE_LOOP('',(#206427,#206428,#206436,#206444)); +#206427 = ORIENTED_EDGE('',*,*,#206406,.T.); +#206428 = ORIENTED_EDGE('',*,*,#206429,.T.); +#206429 = EDGE_CURVE('',#206399,#206430,#206432,.T.); +#206430 = VERTEX_POINT('',#206431); +#206431 = CARTESIAN_POINT('',(149.523578,-63.11,1.545)); +#206432 = LINE('',#206433,#206434); +#206433 = CARTESIAN_POINT('',(125.476421,-63.11,1.545)); +#206434 = VECTOR('',#206435,1.); +#206435 = DIRECTION('',(1.,0.,0.)); +#206436 = ORIENTED_EDGE('',*,*,#206437,.F.); +#206437 = EDGE_CURVE('',#206438,#206430,#206440,.T.); +#206438 = VERTEX_POINT('',#206439); +#206439 = CARTESIAN_POINT('',(149.523578,-63.11,1.51)); +#206440 = LINE('',#206441,#206442); +#206441 = CARTESIAN_POINT('',(149.523578,-63.11,1.51)); +#206442 = VECTOR('',#206443,1.); +#206443 = DIRECTION('',(0.,0.,1.)); +#206444 = ORIENTED_EDGE('',*,*,#206445,.F.); +#206445 = EDGE_CURVE('',#206407,#206438,#206446,.T.); +#206446 = LINE('',#206447,#206448); +#206447 = CARTESIAN_POINT('',(125.476421,-63.11,1.51)); +#206448 = VECTOR('',#206449,1.); +#206449 = DIRECTION('',(1.,0.,0.)); +#206450 = PLANE('',#206451); +#206451 = AXIS2_PLACEMENT_3D('',#206452,#206453,#206454); +#206452 = CARTESIAN_POINT('',(125.476421,-63.11,1.51)); +#206453 = DIRECTION('',(0.,1.,0.)); +#206454 = DIRECTION('',(1.,0.,0.)); +#206455 = ADVANCED_FACE('',(#206456),#206481,.T.); +#206456 = FACE_BOUND('',#206457,.T.); +#206457 = EDGE_LOOP('',(#206458,#206459,#206467,#206475)); +#206458 = ORIENTED_EDGE('',*,*,#206437,.T.); +#206459 = ORIENTED_EDGE('',*,*,#206460,.T.); +#206460 = EDGE_CURVE('',#206430,#206461,#206463,.T.); +#206461 = VERTEX_POINT('',#206462); +#206462 = CARTESIAN_POINT('',(150.025,-62.608578,1.545)); +#206463 = LINE('',#206464,#206465); +#206464 = CARTESIAN_POINT('',(149.523578,-63.11,1.545)); +#206465 = VECTOR('',#206466,1.); +#206466 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206467 = ORIENTED_EDGE('',*,*,#206468,.F.); +#206468 = EDGE_CURVE('',#206469,#206461,#206471,.T.); +#206469 = VERTEX_POINT('',#206470); +#206470 = CARTESIAN_POINT('',(150.025,-62.608578,1.51)); +#206471 = LINE('',#206472,#206473); +#206472 = CARTESIAN_POINT('',(150.025,-62.608578,1.51)); +#206473 = VECTOR('',#206474,1.); +#206474 = DIRECTION('',(0.,0.,1.)); +#206475 = ORIENTED_EDGE('',*,*,#206476,.F.); +#206476 = EDGE_CURVE('',#206438,#206469,#206477,.T.); +#206477 = LINE('',#206478,#206479); +#206478 = CARTESIAN_POINT('',(149.523578,-63.11,1.51)); +#206479 = VECTOR('',#206480,1.); +#206480 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206481 = PLANE('',#206482); +#206482 = AXIS2_PLACEMENT_3D('',#206483,#206484,#206485); +#206483 = CARTESIAN_POINT('',(149.523578,-63.11,1.51)); +#206484 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206485 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206486 = ADVANCED_FACE('',(#206487),#206512,.T.); +#206487 = FACE_BOUND('',#206488,.T.); +#206488 = EDGE_LOOP('',(#206489,#206490,#206498,#206506)); +#206489 = ORIENTED_EDGE('',*,*,#206468,.T.); +#206490 = ORIENTED_EDGE('',*,*,#206491,.T.); +#206491 = EDGE_CURVE('',#206461,#206492,#206494,.T.); +#206492 = VERTEX_POINT('',#206493); +#206493 = CARTESIAN_POINT('',(150.026921,-61.730491,1.545)); +#206494 = LINE('',#206495,#206496); +#206495 = CARTESIAN_POINT('',(150.025,-62.608578,1.545)); +#206496 = VECTOR('',#206497,1.); +#206497 = DIRECTION('',(2.18770509411E-03,0.99999760697,0.)); +#206498 = ORIENTED_EDGE('',*,*,#206499,.F.); +#206499 = EDGE_CURVE('',#206500,#206492,#206502,.T.); +#206500 = VERTEX_POINT('',#206501); +#206501 = CARTESIAN_POINT('',(150.026921,-61.730491,1.51)); +#206502 = LINE('',#206503,#206504); +#206503 = CARTESIAN_POINT('',(150.026921,-61.730491,1.51)); +#206504 = VECTOR('',#206505,1.); +#206505 = DIRECTION('',(0.,0.,1.)); +#206506 = ORIENTED_EDGE('',*,*,#206507,.F.); +#206507 = EDGE_CURVE('',#206469,#206500,#206508,.T.); +#206508 = LINE('',#206509,#206510); +#206509 = CARTESIAN_POINT('',(150.025,-62.608578,1.51)); +#206510 = VECTOR('',#206511,1.); +#206511 = DIRECTION('',(2.18770509411E-03,0.99999760697,0.)); +#206512 = PLANE('',#206513); +#206513 = AXIS2_PLACEMENT_3D('',#206514,#206515,#206516); +#206514 = CARTESIAN_POINT('',(150.025,-62.608578,1.51)); +#206515 = DIRECTION('',(-0.99999760697,2.18770509411E-03,0.)); +#206516 = DIRECTION('',(2.18770509411E-03,0.99999760697,0.)); +#206517 = ADVANCED_FACE('',(#206518),#206543,.T.); +#206518 = FACE_BOUND('',#206519,.T.); +#206519 = EDGE_LOOP('',(#206520,#206521,#206529,#206537)); +#206520 = ORIENTED_EDGE('',*,*,#206499,.T.); +#206521 = ORIENTED_EDGE('',*,*,#206522,.T.); +#206522 = EDGE_CURVE('',#206492,#206523,#206525,.T.); +#206523 = VERTEX_POINT('',#206524); +#206524 = CARTESIAN_POINT('',(150.041853,-61.694443,1.545)); +#206525 = LINE('',#206526,#206527); +#206526 = CARTESIAN_POINT('',(150.026921,-61.730491,1.545)); +#206527 = VECTOR('',#206528,1.); +#206528 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#206529 = ORIENTED_EDGE('',*,*,#206530,.F.); +#206530 = EDGE_CURVE('',#206531,#206523,#206533,.T.); +#206531 = VERTEX_POINT('',#206532); +#206532 = CARTESIAN_POINT('',(150.041853,-61.694443,1.51)); +#206533 = LINE('',#206534,#206535); +#206534 = CARTESIAN_POINT('',(150.041853,-61.694443,1.51)); +#206535 = VECTOR('',#206536,1.); +#206536 = DIRECTION('',(0.,0.,1.)); +#206537 = ORIENTED_EDGE('',*,*,#206538,.F.); +#206538 = EDGE_CURVE('',#206500,#206531,#206539,.T.); +#206539 = LINE('',#206540,#206541); +#206540 = CARTESIAN_POINT('',(150.026921,-61.730491,1.51)); +#206541 = VECTOR('',#206542,1.); +#206542 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#206543 = PLANE('',#206544); +#206544 = AXIS2_PLACEMENT_3D('',#206545,#206546,#206547); +#206545 = CARTESIAN_POINT('',(150.026921,-61.730491,1.51)); +#206546 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#206547 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#206548 = ADVANCED_FACE('',(#206549),#206574,.T.); +#206549 = FACE_BOUND('',#206550,.T.); +#206550 = EDGE_LOOP('',(#206551,#206552,#206560,#206568)); +#206551 = ORIENTED_EDGE('',*,*,#206530,.T.); +#206552 = ORIENTED_EDGE('',*,*,#206553,.T.); +#206553 = EDGE_CURVE('',#206523,#206554,#206556,.T.); +#206554 = VERTEX_POINT('',#206555); +#206555 = CARTESIAN_POINT('',(150.369443,-61.366853,1.545)); +#206556 = LINE('',#206557,#206558); +#206557 = CARTESIAN_POINT('',(150.041853,-61.694443,1.545)); +#206558 = VECTOR('',#206559,1.); +#206559 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206560 = ORIENTED_EDGE('',*,*,#206561,.F.); +#206561 = EDGE_CURVE('',#206562,#206554,#206564,.T.); +#206562 = VERTEX_POINT('',#206563); +#206563 = CARTESIAN_POINT('',(150.369443,-61.366853,1.51)); +#206564 = LINE('',#206565,#206566); +#206565 = CARTESIAN_POINT('',(150.369443,-61.366853,1.51)); +#206566 = VECTOR('',#206567,1.); +#206567 = DIRECTION('',(0.,0.,1.)); +#206568 = ORIENTED_EDGE('',*,*,#206569,.F.); +#206569 = EDGE_CURVE('',#206531,#206562,#206570,.T.); +#206570 = LINE('',#206571,#206572); +#206571 = CARTESIAN_POINT('',(150.041853,-61.694443,1.51)); +#206572 = VECTOR('',#206573,1.); +#206573 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206574 = PLANE('',#206575); +#206575 = AXIS2_PLACEMENT_3D('',#206576,#206577,#206578); +#206576 = CARTESIAN_POINT('',(150.041853,-61.694443,1.51)); +#206577 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206578 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#206579 = ADVANCED_FACE('',(#206580),#206605,.T.); +#206580 = FACE_BOUND('',#206581,.T.); +#206581 = EDGE_LOOP('',(#206582,#206583,#206591,#206599)); +#206582 = ORIENTED_EDGE('',*,*,#206561,.T.); +#206583 = ORIENTED_EDGE('',*,*,#206584,.T.); +#206584 = EDGE_CURVE('',#206554,#206585,#206587,.T.); +#206585 = VERTEX_POINT('',#206586); +#206586 = CARTESIAN_POINT('',(150.405491,-61.351921,1.545)); +#206587 = LINE('',#206588,#206589); +#206588 = CARTESIAN_POINT('',(150.369443,-61.366853,1.545)); +#206589 = VECTOR('',#206590,1.); +#206590 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206591 = ORIENTED_EDGE('',*,*,#206592,.F.); +#206592 = EDGE_CURVE('',#206593,#206585,#206595,.T.); +#206593 = VERTEX_POINT('',#206594); +#206594 = CARTESIAN_POINT('',(150.405491,-61.351921,1.51)); +#206595 = LINE('',#206596,#206597); +#206596 = CARTESIAN_POINT('',(150.405491,-61.351921,1.51)); +#206597 = VECTOR('',#206598,1.); +#206598 = DIRECTION('',(0.,0.,1.)); +#206599 = ORIENTED_EDGE('',*,*,#206600,.F.); +#206600 = EDGE_CURVE('',#206562,#206593,#206601,.T.); +#206601 = LINE('',#206602,#206603); +#206602 = CARTESIAN_POINT('',(150.369443,-61.366853,1.51)); +#206603 = VECTOR('',#206604,1.); +#206604 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206605 = PLANE('',#206606); +#206606 = AXIS2_PLACEMENT_3D('',#206607,#206608,#206609); +#206607 = CARTESIAN_POINT('',(150.369443,-61.366853,1.51)); +#206608 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#206609 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#206610 = ADVANCED_FACE('',(#206611),#206636,.T.); +#206611 = FACE_BOUND('',#206612,.T.); +#206612 = EDGE_LOOP('',(#206613,#206614,#206622,#206630)); +#206613 = ORIENTED_EDGE('',*,*,#206592,.T.); +#206614 = ORIENTED_EDGE('',*,*,#206615,.T.); +#206615 = EDGE_CURVE('',#206585,#206616,#206618,.T.); +#206616 = VERTEX_POINT('',#206617); +#206617 = CARTESIAN_POINT('',(152.294509,-61.351921,1.545)); +#206618 = LINE('',#206619,#206620); +#206619 = CARTESIAN_POINT('',(150.405491,-61.351921,1.545)); +#206620 = VECTOR('',#206621,1.); +#206621 = DIRECTION('',(1.,0.,0.)); +#206622 = ORIENTED_EDGE('',*,*,#206623,.F.); +#206623 = EDGE_CURVE('',#206624,#206616,#206626,.T.); +#206624 = VERTEX_POINT('',#206625); +#206625 = CARTESIAN_POINT('',(152.294509,-61.351921,1.51)); +#206626 = LINE('',#206627,#206628); +#206627 = CARTESIAN_POINT('',(152.294509,-61.351921,1.51)); +#206628 = VECTOR('',#206629,1.); +#206629 = DIRECTION('',(0.,0.,1.)); +#206630 = ORIENTED_EDGE('',*,*,#206631,.F.); +#206631 = EDGE_CURVE('',#206593,#206624,#206632,.T.); +#206632 = LINE('',#206633,#206634); +#206633 = CARTESIAN_POINT('',(150.405491,-61.351921,1.51)); +#206634 = VECTOR('',#206635,1.); +#206635 = DIRECTION('',(1.,0.,0.)); +#206636 = PLANE('',#206637); +#206637 = AXIS2_PLACEMENT_3D('',#206638,#206639,#206640); +#206638 = CARTESIAN_POINT('',(150.405491,-61.351921,1.51)); +#206639 = DIRECTION('',(0.,1.,0.)); +#206640 = DIRECTION('',(1.,0.,0.)); +#206641 = ADVANCED_FACE('',(#206642),#206667,.T.); +#206642 = FACE_BOUND('',#206643,.T.); +#206643 = EDGE_LOOP('',(#206644,#206645,#206653,#206661)); +#206644 = ORIENTED_EDGE('',*,*,#206623,.T.); +#206645 = ORIENTED_EDGE('',*,*,#206646,.T.); +#206646 = EDGE_CURVE('',#206616,#206647,#206649,.T.); +#206647 = VERTEX_POINT('',#206648); +#206648 = CARTESIAN_POINT('',(152.330557,-61.366853,1.545)); +#206649 = LINE('',#206650,#206651); +#206650 = CARTESIAN_POINT('',(152.294509,-61.351921,1.545)); +#206651 = VECTOR('',#206652,1.); +#206652 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206653 = ORIENTED_EDGE('',*,*,#206654,.F.); +#206654 = EDGE_CURVE('',#206655,#206647,#206657,.T.); +#206655 = VERTEX_POINT('',#206656); +#206656 = CARTESIAN_POINT('',(152.330557,-61.366853,1.51)); +#206657 = LINE('',#206658,#206659); +#206658 = CARTESIAN_POINT('',(152.330557,-61.366853,1.51)); +#206659 = VECTOR('',#206660,1.); +#206660 = DIRECTION('',(0.,0.,1.)); +#206661 = ORIENTED_EDGE('',*,*,#206662,.F.); +#206662 = EDGE_CURVE('',#206624,#206655,#206663,.T.); +#206663 = LINE('',#206664,#206665); +#206664 = CARTESIAN_POINT('',(152.294509,-61.351921,1.51)); +#206665 = VECTOR('',#206666,1.); +#206666 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206667 = PLANE('',#206668); +#206668 = AXIS2_PLACEMENT_3D('',#206669,#206670,#206671); +#206669 = CARTESIAN_POINT('',(152.294509,-61.351921,1.51)); +#206670 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#206671 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#206672 = ADVANCED_FACE('',(#206673),#206698,.T.); +#206673 = FACE_BOUND('',#206674,.T.); +#206674 = EDGE_LOOP('',(#206675,#206676,#206684,#206692)); +#206675 = ORIENTED_EDGE('',*,*,#206654,.T.); +#206676 = ORIENTED_EDGE('',*,*,#206677,.T.); +#206677 = EDGE_CURVE('',#206647,#206678,#206680,.T.); +#206678 = VERTEX_POINT('',#206679); +#206679 = CARTESIAN_POINT('',(152.658147,-61.694443,1.545)); +#206680 = LINE('',#206681,#206682); +#206681 = CARTESIAN_POINT('',(152.330557,-61.366853,1.545)); +#206682 = VECTOR('',#206683,1.); +#206683 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206684 = ORIENTED_EDGE('',*,*,#206685,.F.); +#206685 = EDGE_CURVE('',#206686,#206678,#206688,.T.); +#206686 = VERTEX_POINT('',#206687); +#206687 = CARTESIAN_POINT('',(152.658147,-61.694443,1.51)); +#206688 = LINE('',#206689,#206690); +#206689 = CARTESIAN_POINT('',(152.658147,-61.694443,1.51)); +#206690 = VECTOR('',#206691,1.); +#206691 = DIRECTION('',(0.,0.,1.)); +#206692 = ORIENTED_EDGE('',*,*,#206693,.F.); +#206693 = EDGE_CURVE('',#206655,#206686,#206694,.T.); +#206694 = LINE('',#206695,#206696); +#206695 = CARTESIAN_POINT('',(152.330557,-61.366853,1.51)); +#206696 = VECTOR('',#206697,1.); +#206697 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206698 = PLANE('',#206699); +#206699 = AXIS2_PLACEMENT_3D('',#206700,#206701,#206702); +#206700 = CARTESIAN_POINT('',(152.330557,-61.366853,1.51)); +#206701 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#206702 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206703 = ADVANCED_FACE('',(#206704),#206729,.T.); +#206704 = FACE_BOUND('',#206705,.T.); +#206705 = EDGE_LOOP('',(#206706,#206707,#206715,#206723)); +#206706 = ORIENTED_EDGE('',*,*,#206685,.T.); +#206707 = ORIENTED_EDGE('',*,*,#206708,.T.); +#206708 = EDGE_CURVE('',#206678,#206709,#206711,.T.); +#206709 = VERTEX_POINT('',#206710); +#206710 = CARTESIAN_POINT('',(152.673079,-61.730491,1.545)); +#206711 = LINE('',#206712,#206713); +#206712 = CARTESIAN_POINT('',(152.658147,-61.694443,1.545)); +#206713 = VECTOR('',#206714,1.); +#206714 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206715 = ORIENTED_EDGE('',*,*,#206716,.F.); +#206716 = EDGE_CURVE('',#206717,#206709,#206719,.T.); +#206717 = VERTEX_POINT('',#206718); +#206718 = CARTESIAN_POINT('',(152.673079,-61.730491,1.51)); +#206719 = LINE('',#206720,#206721); +#206720 = CARTESIAN_POINT('',(152.673079,-61.730491,1.51)); +#206721 = VECTOR('',#206722,1.); +#206722 = DIRECTION('',(0.,0.,1.)); +#206723 = ORIENTED_EDGE('',*,*,#206724,.F.); +#206724 = EDGE_CURVE('',#206686,#206717,#206725,.T.); +#206725 = LINE('',#206726,#206727); +#206726 = CARTESIAN_POINT('',(152.658147,-61.694443,1.51)); +#206727 = VECTOR('',#206728,1.); +#206728 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206729 = PLANE('',#206730); +#206730 = AXIS2_PLACEMENT_3D('',#206731,#206732,#206733); +#206731 = CARTESIAN_POINT('',(152.658147,-61.694443,1.51)); +#206732 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#206733 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#206734 = ADVANCED_FACE('',(#206735),#206760,.T.); +#206735 = FACE_BOUND('',#206736,.T.); +#206736 = EDGE_LOOP('',(#206737,#206738,#206746,#206754)); +#206737 = ORIENTED_EDGE('',*,*,#206716,.T.); +#206738 = ORIENTED_EDGE('',*,*,#206739,.T.); +#206739 = EDGE_CURVE('',#206709,#206740,#206742,.T.); +#206740 = VERTEX_POINT('',#206741); +#206741 = CARTESIAN_POINT('',(152.673079,-62.669509,1.545)); +#206742 = LINE('',#206743,#206744); +#206743 = CARTESIAN_POINT('',(152.673079,-61.730491,1.545)); +#206744 = VECTOR('',#206745,1.); +#206745 = DIRECTION('',(0.,-1.,0.)); +#206746 = ORIENTED_EDGE('',*,*,#206747,.F.); +#206747 = EDGE_CURVE('',#206748,#206740,#206750,.T.); +#206748 = VERTEX_POINT('',#206749); +#206749 = CARTESIAN_POINT('',(152.673079,-62.669509,1.51)); +#206750 = LINE('',#206751,#206752); +#206751 = CARTESIAN_POINT('',(152.673079,-62.669509,1.51)); +#206752 = VECTOR('',#206753,1.); +#206753 = DIRECTION('',(0.,0.,1.)); +#206754 = ORIENTED_EDGE('',*,*,#206755,.F.); +#206755 = EDGE_CURVE('',#206717,#206748,#206756,.T.); +#206756 = LINE('',#206757,#206758); +#206757 = CARTESIAN_POINT('',(152.673079,-61.730491,1.51)); +#206758 = VECTOR('',#206759,1.); +#206759 = DIRECTION('',(0.,-1.,0.)); +#206760 = PLANE('',#206761); +#206761 = AXIS2_PLACEMENT_3D('',#206762,#206763,#206764); +#206762 = CARTESIAN_POINT('',(152.673079,-61.730491,1.51)); +#206763 = DIRECTION('',(1.,0.,-0.)); +#206764 = DIRECTION('',(0.,-1.,0.)); +#206765 = ADVANCED_FACE('',(#206766),#206793,.T.); +#206766 = FACE_BOUND('',#206767,.T.); +#206767 = EDGE_LOOP('',(#206768,#206769,#206778,#206786)); +#206768 = ORIENTED_EDGE('',*,*,#206747,.T.); +#206769 = ORIENTED_EDGE('',*,*,#206770,.T.); +#206770 = EDGE_CURVE('',#206740,#206771,#206773,.T.); +#206771 = VERTEX_POINT('',#206772); +#206772 = CARTESIAN_POINT('',(152.476921,-62.669509,1.545)); +#206773 = CIRCLE('',#206774,0.100000456609); +#206774 = AXIS2_PLACEMENT_3D('',#206775,#206776,#206777); +#206775 = CARTESIAN_POINT('',(152.575,-62.65,1.545)); +#206776 = DIRECTION('',(-0.,0.,-1.)); +#206777 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#206778 = ORIENTED_EDGE('',*,*,#206779,.F.); +#206779 = EDGE_CURVE('',#206780,#206771,#206782,.T.); +#206780 = VERTEX_POINT('',#206781); +#206781 = CARTESIAN_POINT('',(152.476921,-62.669509,1.51)); +#206782 = LINE('',#206783,#206784); +#206783 = CARTESIAN_POINT('',(152.476921,-62.669509,1.51)); +#206784 = VECTOR('',#206785,1.); +#206785 = DIRECTION('',(0.,0.,1.)); +#206786 = ORIENTED_EDGE('',*,*,#206787,.F.); +#206787 = EDGE_CURVE('',#206748,#206780,#206788,.T.); +#206788 = CIRCLE('',#206789,0.100000456609); +#206789 = AXIS2_PLACEMENT_3D('',#206790,#206791,#206792); +#206790 = CARTESIAN_POINT('',(152.575,-62.65,1.51)); +#206791 = DIRECTION('',(-0.,0.,-1.)); +#206792 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#206793 = CYLINDRICAL_SURFACE('',#206794,0.100000456609); +#206794 = AXIS2_PLACEMENT_3D('',#206795,#206796,#206797); +#206795 = CARTESIAN_POINT('',(152.575,-62.65,1.51)); +#206796 = DIRECTION('',(-0.,0.,-1.)); +#206797 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#206798 = ADVANCED_FACE('',(#206799),#206824,.T.); +#206799 = FACE_BOUND('',#206800,.T.); +#206800 = EDGE_LOOP('',(#206801,#206802,#206810,#206818)); +#206801 = ORIENTED_EDGE('',*,*,#206779,.T.); +#206802 = ORIENTED_EDGE('',*,*,#206803,.T.); +#206803 = EDGE_CURVE('',#206771,#206804,#206806,.T.); +#206804 = VERTEX_POINT('',#206805); +#206805 = CARTESIAN_POINT('',(152.475,-61.791422,1.545)); +#206806 = LINE('',#206807,#206808); +#206807 = CARTESIAN_POINT('',(152.476921,-62.669509,1.545)); +#206808 = VECTOR('',#206809,1.); +#206809 = DIRECTION('',(-2.187705094142E-03,0.99999760697,0.)); +#206810 = ORIENTED_EDGE('',*,*,#206811,.F.); +#206811 = EDGE_CURVE('',#206812,#206804,#206814,.T.); +#206812 = VERTEX_POINT('',#206813); +#206813 = CARTESIAN_POINT('',(152.475,-61.791422,1.51)); +#206814 = LINE('',#206815,#206816); +#206815 = CARTESIAN_POINT('',(152.475,-61.791422,1.51)); +#206816 = VECTOR('',#206817,1.); +#206817 = DIRECTION('',(0.,0.,1.)); +#206818 = ORIENTED_EDGE('',*,*,#206819,.F.); +#206819 = EDGE_CURVE('',#206780,#206812,#206820,.T.); +#206820 = LINE('',#206821,#206822); +#206821 = CARTESIAN_POINT('',(152.476921,-62.669509,1.51)); +#206822 = VECTOR('',#206823,1.); +#206823 = DIRECTION('',(-2.187705094142E-03,0.99999760697,0.)); +#206824 = PLANE('',#206825); +#206825 = AXIS2_PLACEMENT_3D('',#206826,#206827,#206828); +#206826 = CARTESIAN_POINT('',(152.476921,-62.669509,1.51)); +#206827 = DIRECTION('',(-0.99999760697,-2.187705094142E-03,0.)); +#206828 = DIRECTION('',(-2.187705094142E-03,0.99999760697,0.)); +#206829 = ADVANCED_FACE('',(#206830),#206855,.T.); +#206830 = FACE_BOUND('',#206831,.T.); +#206831 = EDGE_LOOP('',(#206832,#206833,#206841,#206849)); +#206832 = ORIENTED_EDGE('',*,*,#206811,.T.); +#206833 = ORIENTED_EDGE('',*,*,#206834,.T.); +#206834 = EDGE_CURVE('',#206804,#206835,#206837,.T.); +#206835 = VERTEX_POINT('',#206836); +#206836 = CARTESIAN_POINT('',(152.233578,-61.55,1.545)); +#206837 = LINE('',#206838,#206839); +#206838 = CARTESIAN_POINT('',(152.475,-61.791422,1.545)); +#206839 = VECTOR('',#206840,1.); +#206840 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206841 = ORIENTED_EDGE('',*,*,#206842,.F.); +#206842 = EDGE_CURVE('',#206843,#206835,#206845,.T.); +#206843 = VERTEX_POINT('',#206844); +#206844 = CARTESIAN_POINT('',(152.233578,-61.55,1.51)); +#206845 = LINE('',#206846,#206847); +#206846 = CARTESIAN_POINT('',(152.233578,-61.55,1.51)); +#206847 = VECTOR('',#206848,1.); +#206848 = DIRECTION('',(0.,0.,1.)); +#206849 = ORIENTED_EDGE('',*,*,#206850,.F.); +#206850 = EDGE_CURVE('',#206812,#206843,#206851,.T.); +#206851 = LINE('',#206852,#206853); +#206852 = CARTESIAN_POINT('',(152.475,-61.791422,1.51)); +#206853 = VECTOR('',#206854,1.); +#206854 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206855 = PLANE('',#206856); +#206856 = AXIS2_PLACEMENT_3D('',#206857,#206858,#206859); +#206857 = CARTESIAN_POINT('',(152.475,-61.791422,1.51)); +#206858 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#206859 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#206860 = ADVANCED_FACE('',(#206861),#206886,.T.); +#206861 = FACE_BOUND('',#206862,.T.); +#206862 = EDGE_LOOP('',(#206863,#206864,#206872,#206880)); +#206863 = ORIENTED_EDGE('',*,*,#206842,.T.); +#206864 = ORIENTED_EDGE('',*,*,#206865,.T.); +#206865 = EDGE_CURVE('',#206835,#206866,#206868,.T.); +#206866 = VERTEX_POINT('',#206867); +#206867 = CARTESIAN_POINT('',(150.466422,-61.55,1.545)); +#206868 = LINE('',#206869,#206870); +#206869 = CARTESIAN_POINT('',(152.233578,-61.55,1.545)); +#206870 = VECTOR('',#206871,1.); +#206871 = DIRECTION('',(-1.,0.,0.)); +#206872 = ORIENTED_EDGE('',*,*,#206873,.F.); +#206873 = EDGE_CURVE('',#206874,#206866,#206876,.T.); +#206874 = VERTEX_POINT('',#206875); +#206875 = CARTESIAN_POINT('',(150.466422,-61.55,1.51)); +#206876 = LINE('',#206877,#206878); +#206877 = CARTESIAN_POINT('',(150.466422,-61.55,1.51)); +#206878 = VECTOR('',#206879,1.); +#206879 = DIRECTION('',(0.,0.,1.)); +#206880 = ORIENTED_EDGE('',*,*,#206881,.F.); +#206881 = EDGE_CURVE('',#206843,#206874,#206882,.T.); +#206882 = LINE('',#206883,#206884); +#206883 = CARTESIAN_POINT('',(152.233578,-61.55,1.51)); +#206884 = VECTOR('',#206885,1.); +#206885 = DIRECTION('',(-1.,0.,0.)); +#206886 = PLANE('',#206887); +#206887 = AXIS2_PLACEMENT_3D('',#206888,#206889,#206890); +#206888 = CARTESIAN_POINT('',(152.233578,-61.55,1.51)); +#206889 = DIRECTION('',(0.,-1.,0.)); +#206890 = DIRECTION('',(-1.,0.,0.)); +#206891 = ADVANCED_FACE('',(#206892),#206917,.T.); +#206892 = FACE_BOUND('',#206893,.T.); +#206893 = EDGE_LOOP('',(#206894,#206895,#206903,#206911)); +#206894 = ORIENTED_EDGE('',*,*,#206873,.T.); +#206895 = ORIENTED_EDGE('',*,*,#206896,.T.); +#206896 = EDGE_CURVE('',#206866,#206897,#206899,.T.); +#206897 = VERTEX_POINT('',#206898); +#206898 = CARTESIAN_POINT('',(150.225,-61.791422,1.545)); +#206899 = LINE('',#206900,#206901); +#206900 = CARTESIAN_POINT('',(150.466422,-61.55,1.545)); +#206901 = VECTOR('',#206902,1.); +#206902 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#206903 = ORIENTED_EDGE('',*,*,#206904,.F.); +#206904 = EDGE_CURVE('',#206905,#206897,#206907,.T.); +#206905 = VERTEX_POINT('',#206906); +#206906 = CARTESIAN_POINT('',(150.225,-61.791422,1.51)); +#206907 = LINE('',#206908,#206909); +#206908 = CARTESIAN_POINT('',(150.225,-61.791422,1.51)); +#206909 = VECTOR('',#206910,1.); +#206910 = DIRECTION('',(0.,0.,1.)); +#206911 = ORIENTED_EDGE('',*,*,#206912,.F.); +#206912 = EDGE_CURVE('',#206874,#206905,#206913,.T.); +#206913 = LINE('',#206914,#206915); +#206914 = CARTESIAN_POINT('',(150.466422,-61.55,1.51)); +#206915 = VECTOR('',#206916,1.); +#206916 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#206917 = PLANE('',#206918); +#206918 = AXIS2_PLACEMENT_3D('',#206919,#206920,#206921); +#206919 = CARTESIAN_POINT('',(150.466422,-61.55,1.51)); +#206920 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#206921 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#206922 = ADVANCED_FACE('',(#206923),#206948,.T.); +#206923 = FACE_BOUND('',#206924,.T.); +#206924 = EDGE_LOOP('',(#206925,#206926,#206934,#206942)); +#206925 = ORIENTED_EDGE('',*,*,#206904,.T.); +#206926 = ORIENTED_EDGE('',*,*,#206927,.T.); +#206927 = EDGE_CURVE('',#206897,#206928,#206930,.T.); +#206928 = VERTEX_POINT('',#206929); +#206929 = CARTESIAN_POINT('',(150.223079,-62.669509,1.545)); +#206930 = LINE('',#206931,#206932); +#206931 = CARTESIAN_POINT('',(150.225,-61.791422,1.545)); +#206932 = VECTOR('',#206933,1.); +#206933 = DIRECTION('',(-2.18770509411E-03,-0.99999760697,0.)); +#206934 = ORIENTED_EDGE('',*,*,#206935,.F.); +#206935 = EDGE_CURVE('',#206936,#206928,#206938,.T.); +#206936 = VERTEX_POINT('',#206937); +#206937 = CARTESIAN_POINT('',(150.223079,-62.669509,1.51)); +#206938 = LINE('',#206939,#206940); +#206939 = CARTESIAN_POINT('',(150.223079,-62.669509,1.51)); +#206940 = VECTOR('',#206941,1.); +#206941 = DIRECTION('',(0.,0.,1.)); +#206942 = ORIENTED_EDGE('',*,*,#206943,.F.); +#206943 = EDGE_CURVE('',#206905,#206936,#206944,.T.); +#206944 = LINE('',#206945,#206946); +#206945 = CARTESIAN_POINT('',(150.225,-61.791422,1.51)); +#206946 = VECTOR('',#206947,1.); +#206947 = DIRECTION('',(-2.18770509411E-03,-0.99999760697,0.)); +#206948 = PLANE('',#206949); +#206949 = AXIS2_PLACEMENT_3D('',#206950,#206951,#206952); +#206950 = CARTESIAN_POINT('',(150.225,-61.791422,1.51)); +#206951 = DIRECTION('',(0.99999760697,-2.18770509411E-03,0.)); +#206952 = DIRECTION('',(-2.18770509411E-03,-0.99999760697,0.)); +#206953 = ADVANCED_FACE('',(#206954),#206979,.T.); +#206954 = FACE_BOUND('',#206955,.T.); +#206955 = EDGE_LOOP('',(#206956,#206957,#206965,#206973)); +#206956 = ORIENTED_EDGE('',*,*,#206935,.T.); +#206957 = ORIENTED_EDGE('',*,*,#206958,.T.); +#206958 = EDGE_CURVE('',#206928,#206959,#206961,.T.); +#206959 = VERTEX_POINT('',#206960); +#206960 = CARTESIAN_POINT('',(150.208148,-62.705557,1.545)); +#206961 = LINE('',#206962,#206963); +#206962 = CARTESIAN_POINT('',(150.223079,-62.669509,1.545)); +#206963 = VECTOR('',#206964,1.); +#206964 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#206965 = ORIENTED_EDGE('',*,*,#206966,.F.); +#206966 = EDGE_CURVE('',#206967,#206959,#206969,.T.); +#206967 = VERTEX_POINT('',#206968); +#206968 = CARTESIAN_POINT('',(150.208148,-62.705557,1.51)); +#206969 = LINE('',#206970,#206971); +#206970 = CARTESIAN_POINT('',(150.208148,-62.705557,1.51)); +#206971 = VECTOR('',#206972,1.); +#206972 = DIRECTION('',(0.,0.,1.)); +#206973 = ORIENTED_EDGE('',*,*,#206974,.F.); +#206974 = EDGE_CURVE('',#206936,#206967,#206975,.T.); +#206975 = LINE('',#206976,#206977); +#206976 = CARTESIAN_POINT('',(150.223079,-62.669509,1.51)); +#206977 = VECTOR('',#206978,1.); +#206978 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#206979 = PLANE('',#206980); +#206980 = AXIS2_PLACEMENT_3D('',#206981,#206982,#206983); +#206981 = CARTESIAN_POINT('',(150.223079,-62.669509,1.51)); +#206982 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#206983 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#206984 = ADVANCED_FACE('',(#206985),#207010,.T.); +#206985 = FACE_BOUND('',#206986,.T.); +#206986 = EDGE_LOOP('',(#206987,#206988,#206996,#207004)); +#206987 = ORIENTED_EDGE('',*,*,#206966,.T.); +#206988 = ORIENTED_EDGE('',*,*,#206989,.T.); +#206989 = EDGE_CURVE('',#206959,#206990,#206992,.T.); +#206990 = VERTEX_POINT('',#206991); +#206991 = CARTESIAN_POINT('',(149.620557,-63.293147,1.545)); +#206992 = LINE('',#206993,#206994); +#206993 = CARTESIAN_POINT('',(150.208148,-62.705557,1.545)); +#206994 = VECTOR('',#206995,1.); +#206995 = DIRECTION('',(-0.707107382887,-0.707106179486,0.)); +#206996 = ORIENTED_EDGE('',*,*,#206997,.F.); +#206997 = EDGE_CURVE('',#206998,#206990,#207000,.T.); +#206998 = VERTEX_POINT('',#206999); +#206999 = CARTESIAN_POINT('',(149.620557,-63.293147,1.51)); +#207000 = LINE('',#207001,#207002); +#207001 = CARTESIAN_POINT('',(149.620557,-63.293147,1.51)); +#207002 = VECTOR('',#207003,1.); +#207003 = DIRECTION('',(0.,0.,1.)); +#207004 = ORIENTED_EDGE('',*,*,#207005,.F.); +#207005 = EDGE_CURVE('',#206967,#206998,#207006,.T.); +#207006 = LINE('',#207007,#207008); +#207007 = CARTESIAN_POINT('',(150.208148,-62.705557,1.51)); +#207008 = VECTOR('',#207009,1.); +#207009 = DIRECTION('',(-0.707107382887,-0.707106179486,0.)); +#207010 = PLANE('',#207011); +#207011 = AXIS2_PLACEMENT_3D('',#207012,#207013,#207014); +#207012 = CARTESIAN_POINT('',(150.208148,-62.705557,1.51)); +#207013 = DIRECTION('',(0.707106179486,-0.707107382887,0.)); +#207014 = DIRECTION('',(-0.707107382887,-0.707106179486,0.)); +#207015 = ADVANCED_FACE('',(#207016),#207041,.T.); +#207016 = FACE_BOUND('',#207017,.T.); +#207017 = EDGE_LOOP('',(#207018,#207019,#207027,#207035)); +#207018 = ORIENTED_EDGE('',*,*,#206997,.T.); +#207019 = ORIENTED_EDGE('',*,*,#207020,.T.); +#207020 = EDGE_CURVE('',#206990,#207021,#207023,.T.); +#207021 = VERTEX_POINT('',#207022); +#207022 = CARTESIAN_POINT('',(149.584509,-63.308079,1.545)); +#207023 = LINE('',#207024,#207025); +#207024 = CARTESIAN_POINT('',(149.620557,-63.293147,1.545)); +#207025 = VECTOR('',#207026,1.); +#207026 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#207027 = ORIENTED_EDGE('',*,*,#207028,.F.); +#207028 = EDGE_CURVE('',#207029,#207021,#207031,.T.); +#207029 = VERTEX_POINT('',#207030); +#207030 = CARTESIAN_POINT('',(149.584509,-63.308079,1.51)); +#207031 = LINE('',#207032,#207033); +#207032 = CARTESIAN_POINT('',(149.584509,-63.308079,1.51)); +#207033 = VECTOR('',#207034,1.); +#207034 = DIRECTION('',(0.,0.,1.)); +#207035 = ORIENTED_EDGE('',*,*,#207036,.F.); +#207036 = EDGE_CURVE('',#206998,#207029,#207037,.T.); +#207037 = LINE('',#207038,#207039); +#207038 = CARTESIAN_POINT('',(149.620557,-63.293147,1.51)); +#207039 = VECTOR('',#207040,1.); +#207040 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#207041 = PLANE('',#207042); +#207042 = AXIS2_PLACEMENT_3D('',#207043,#207044,#207045); +#207043 = CARTESIAN_POINT('',(149.620557,-63.293147,1.51)); +#207044 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#207045 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#207046 = ADVANCED_FACE('',(#207047),#207072,.T.); +#207047 = FACE_BOUND('',#207048,.T.); +#207048 = EDGE_LOOP('',(#207049,#207050,#207058,#207066)); +#207049 = ORIENTED_EDGE('',*,*,#207028,.T.); +#207050 = ORIENTED_EDGE('',*,*,#207051,.T.); +#207051 = EDGE_CURVE('',#207021,#207052,#207054,.T.); +#207052 = VERTEX_POINT('',#207053); +#207053 = CARTESIAN_POINT('',(125.415491,-63.308079,1.545)); +#207054 = LINE('',#207055,#207056); +#207055 = CARTESIAN_POINT('',(149.584509,-63.308079,1.545)); +#207056 = VECTOR('',#207057,1.); +#207057 = DIRECTION('',(-1.,0.,0.)); +#207058 = ORIENTED_EDGE('',*,*,#207059,.F.); +#207059 = EDGE_CURVE('',#207060,#207052,#207062,.T.); +#207060 = VERTEX_POINT('',#207061); +#207061 = CARTESIAN_POINT('',(125.415491,-63.308079,1.51)); +#207062 = LINE('',#207063,#207064); +#207063 = CARTESIAN_POINT('',(125.415491,-63.308079,1.51)); +#207064 = VECTOR('',#207065,1.); +#207065 = DIRECTION('',(0.,0.,1.)); +#207066 = ORIENTED_EDGE('',*,*,#207067,.F.); +#207067 = EDGE_CURVE('',#207029,#207060,#207068,.T.); +#207068 = LINE('',#207069,#207070); +#207069 = CARTESIAN_POINT('',(149.584509,-63.308079,1.51)); +#207070 = VECTOR('',#207071,1.); +#207071 = DIRECTION('',(-1.,0.,0.)); +#207072 = PLANE('',#207073); +#207073 = AXIS2_PLACEMENT_3D('',#207074,#207075,#207076); +#207074 = CARTESIAN_POINT('',(149.584509,-63.308079,1.51)); +#207075 = DIRECTION('',(0.,-1.,0.)); +#207076 = DIRECTION('',(-1.,0.,0.)); +#207077 = ADVANCED_FACE('',(#207078),#207103,.T.); +#207078 = FACE_BOUND('',#207079,.T.); +#207079 = EDGE_LOOP('',(#207080,#207081,#207089,#207097)); +#207080 = ORIENTED_EDGE('',*,*,#207059,.T.); +#207081 = ORIENTED_EDGE('',*,*,#207082,.T.); +#207082 = EDGE_CURVE('',#207052,#207083,#207085,.T.); +#207083 = VERTEX_POINT('',#207084); +#207084 = CARTESIAN_POINT('',(125.379443,-63.293148,1.545)); +#207085 = LINE('',#207086,#207087); +#207086 = CARTESIAN_POINT('',(125.415491,-63.308079,1.545)); +#207087 = VECTOR('',#207088,1.); +#207088 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#207089 = ORIENTED_EDGE('',*,*,#207090,.F.); +#207090 = EDGE_CURVE('',#207091,#207083,#207093,.T.); +#207091 = VERTEX_POINT('',#207092); +#207092 = CARTESIAN_POINT('',(125.379443,-63.293148,1.51)); +#207093 = LINE('',#207094,#207095); +#207094 = CARTESIAN_POINT('',(125.379443,-63.293148,1.51)); +#207095 = VECTOR('',#207096,1.); +#207096 = DIRECTION('',(0.,0.,1.)); +#207097 = ORIENTED_EDGE('',*,*,#207098,.F.); +#207098 = EDGE_CURVE('',#207060,#207091,#207099,.T.); +#207099 = LINE('',#207100,#207101); +#207100 = CARTESIAN_POINT('',(125.415491,-63.308079,1.51)); +#207101 = VECTOR('',#207102,1.); +#207102 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#207103 = PLANE('',#207104); +#207104 = AXIS2_PLACEMENT_3D('',#207105,#207106,#207107); +#207105 = CARTESIAN_POINT('',(125.415491,-63.308079,1.51)); +#207106 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#207107 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#207108 = ADVANCED_FACE('',(#207109),#207134,.T.); +#207109 = FACE_BOUND('',#207110,.T.); +#207110 = EDGE_LOOP('',(#207111,#207112,#207120,#207128)); +#207111 = ORIENTED_EDGE('',*,*,#207090,.T.); +#207112 = ORIENTED_EDGE('',*,*,#207113,.T.); +#207113 = EDGE_CURVE('',#207083,#207114,#207116,.T.); +#207114 = VERTEX_POINT('',#207115); +#207115 = CARTESIAN_POINT('',(124.791853,-62.705557,1.545)); +#207116 = LINE('',#207117,#207118); +#207117 = CARTESIAN_POINT('',(125.379443,-63.293148,1.545)); +#207118 = VECTOR('',#207119,1.); +#207119 = DIRECTION('',(-0.707106179486,0.707107382887,0.)); +#207120 = ORIENTED_EDGE('',*,*,#207121,.F.); +#207121 = EDGE_CURVE('',#207122,#207114,#207124,.T.); +#207122 = VERTEX_POINT('',#207123); +#207123 = CARTESIAN_POINT('',(124.791853,-62.705557,1.51)); +#207124 = LINE('',#207125,#207126); +#207125 = CARTESIAN_POINT('',(124.791853,-62.705557,1.51)); +#207126 = VECTOR('',#207127,1.); +#207127 = DIRECTION('',(0.,0.,1.)); +#207128 = ORIENTED_EDGE('',*,*,#207129,.F.); +#207129 = EDGE_CURVE('',#207091,#207122,#207130,.T.); +#207130 = LINE('',#207131,#207132); +#207131 = CARTESIAN_POINT('',(125.379443,-63.293148,1.51)); +#207132 = VECTOR('',#207133,1.); +#207133 = DIRECTION('',(-0.707106179486,0.707107382887,0.)); +#207134 = PLANE('',#207135); +#207135 = AXIS2_PLACEMENT_3D('',#207136,#207137,#207138); +#207136 = CARTESIAN_POINT('',(125.379443,-63.293148,1.51)); +#207137 = DIRECTION('',(-0.707107382887,-0.707106179486,0.)); +#207138 = DIRECTION('',(-0.707106179486,0.707107382887,0.)); +#207139 = ADVANCED_FACE('',(#207140),#207165,.T.); +#207140 = FACE_BOUND('',#207141,.T.); +#207141 = EDGE_LOOP('',(#207142,#207143,#207151,#207159)); +#207142 = ORIENTED_EDGE('',*,*,#207121,.T.); +#207143 = ORIENTED_EDGE('',*,*,#207144,.T.); +#207144 = EDGE_CURVE('',#207114,#207145,#207147,.T.); +#207145 = VERTEX_POINT('',#207146); +#207146 = CARTESIAN_POINT('',(124.776921,-62.669509,1.545)); +#207147 = LINE('',#207148,#207149); +#207148 = CARTESIAN_POINT('',(124.791853,-62.705557,1.545)); +#207149 = VECTOR('',#207150,1.); +#207150 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#207151 = ORIENTED_EDGE('',*,*,#207152,.F.); +#207152 = EDGE_CURVE('',#207153,#207145,#207155,.T.); +#207153 = VERTEX_POINT('',#207154); +#207154 = CARTESIAN_POINT('',(124.776921,-62.669509,1.51)); +#207155 = LINE('',#207156,#207157); +#207156 = CARTESIAN_POINT('',(124.776921,-62.669509,1.51)); +#207157 = VECTOR('',#207158,1.); +#207158 = DIRECTION('',(0.,0.,1.)); +#207159 = ORIENTED_EDGE('',*,*,#207160,.F.); +#207160 = EDGE_CURVE('',#207122,#207153,#207161,.T.); +#207161 = LINE('',#207162,#207163); +#207162 = CARTESIAN_POINT('',(124.791853,-62.705557,1.51)); +#207163 = VECTOR('',#207164,1.); +#207164 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#207165 = PLANE('',#207166); +#207166 = AXIS2_PLACEMENT_3D('',#207167,#207168,#207169); +#207167 = CARTESIAN_POINT('',(124.791853,-62.705557,1.51)); +#207168 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#207169 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#207170 = ADVANCED_FACE('',(#207171),#207196,.T.); +#207171 = FACE_BOUND('',#207172,.T.); +#207172 = EDGE_LOOP('',(#207173,#207174,#207182,#207190)); +#207173 = ORIENTED_EDGE('',*,*,#207152,.T.); +#207174 = ORIENTED_EDGE('',*,*,#207175,.T.); +#207175 = EDGE_CURVE('',#207145,#207176,#207178,.T.); +#207176 = VERTEX_POINT('',#207177); +#207177 = CARTESIAN_POINT('',(124.775,-61.791422,1.545)); +#207178 = LINE('',#207179,#207180); +#207179 = CARTESIAN_POINT('',(124.776921,-62.669509,1.545)); +#207180 = VECTOR('',#207181,1.); +#207181 = DIRECTION('',(-2.187705094126E-03,0.99999760697,0.)); +#207182 = ORIENTED_EDGE('',*,*,#207183,.F.); +#207183 = EDGE_CURVE('',#207184,#207176,#207186,.T.); +#207184 = VERTEX_POINT('',#207185); +#207185 = CARTESIAN_POINT('',(124.775,-61.791422,1.51)); +#207186 = LINE('',#207187,#207188); +#207187 = CARTESIAN_POINT('',(124.775,-61.791422,1.51)); +#207188 = VECTOR('',#207189,1.); +#207189 = DIRECTION('',(0.,0.,1.)); +#207190 = ORIENTED_EDGE('',*,*,#207191,.F.); +#207191 = EDGE_CURVE('',#207153,#207184,#207192,.T.); +#207192 = LINE('',#207193,#207194); +#207193 = CARTESIAN_POINT('',(124.776921,-62.669509,1.51)); +#207194 = VECTOR('',#207195,1.); +#207195 = DIRECTION('',(-2.187705094126E-03,0.99999760697,0.)); +#207196 = PLANE('',#207197); +#207197 = AXIS2_PLACEMENT_3D('',#207198,#207199,#207200); +#207198 = CARTESIAN_POINT('',(124.776921,-62.669509,1.51)); +#207199 = DIRECTION('',(-0.99999760697,-2.187705094126E-03,0.)); +#207200 = DIRECTION('',(-2.187705094126E-03,0.99999760697,0.)); +#207201 = ADVANCED_FACE('',(#207202),#207227,.T.); +#207202 = FACE_BOUND('',#207203,.T.); +#207203 = EDGE_LOOP('',(#207204,#207205,#207213,#207221)); +#207204 = ORIENTED_EDGE('',*,*,#207183,.T.); +#207205 = ORIENTED_EDGE('',*,*,#207206,.T.); +#207206 = EDGE_CURVE('',#207176,#207207,#207209,.T.); +#207207 = VERTEX_POINT('',#207208); +#207208 = CARTESIAN_POINT('',(124.533578,-61.55,1.545)); +#207209 = LINE('',#207210,#207211); +#207210 = CARTESIAN_POINT('',(124.775,-61.791422,1.545)); +#207211 = VECTOR('',#207212,1.); +#207212 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207213 = ORIENTED_EDGE('',*,*,#207214,.F.); +#207214 = EDGE_CURVE('',#207215,#207207,#207217,.T.); +#207215 = VERTEX_POINT('',#207216); +#207216 = CARTESIAN_POINT('',(124.533578,-61.55,1.51)); +#207217 = LINE('',#207218,#207219); +#207218 = CARTESIAN_POINT('',(124.533578,-61.55,1.51)); +#207219 = VECTOR('',#207220,1.); +#207220 = DIRECTION('',(0.,0.,1.)); +#207221 = ORIENTED_EDGE('',*,*,#207222,.F.); +#207222 = EDGE_CURVE('',#207184,#207215,#207223,.T.); +#207223 = LINE('',#207224,#207225); +#207224 = CARTESIAN_POINT('',(124.775,-61.791422,1.51)); +#207225 = VECTOR('',#207226,1.); +#207226 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207227 = PLANE('',#207228); +#207228 = AXIS2_PLACEMENT_3D('',#207229,#207230,#207231); +#207229 = CARTESIAN_POINT('',(124.775,-61.791422,1.51)); +#207230 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#207231 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207232 = ADVANCED_FACE('',(#207233),#207258,.T.); +#207233 = FACE_BOUND('',#207234,.T.); +#207234 = EDGE_LOOP('',(#207235,#207236,#207244,#207252)); +#207235 = ORIENTED_EDGE('',*,*,#207214,.T.); +#207236 = ORIENTED_EDGE('',*,*,#207237,.T.); +#207237 = EDGE_CURVE('',#207207,#207238,#207240,.T.); +#207238 = VERTEX_POINT('',#207239); +#207239 = CARTESIAN_POINT('',(122.766422,-61.55,1.545)); +#207240 = LINE('',#207241,#207242); +#207241 = CARTESIAN_POINT('',(124.533578,-61.55,1.545)); +#207242 = VECTOR('',#207243,1.); +#207243 = DIRECTION('',(-1.,0.,0.)); +#207244 = ORIENTED_EDGE('',*,*,#207245,.F.); +#207245 = EDGE_CURVE('',#207246,#207238,#207248,.T.); +#207246 = VERTEX_POINT('',#207247); +#207247 = CARTESIAN_POINT('',(122.766422,-61.55,1.51)); +#207248 = LINE('',#207249,#207250); +#207249 = CARTESIAN_POINT('',(122.766422,-61.55,1.51)); +#207250 = VECTOR('',#207251,1.); +#207251 = DIRECTION('',(0.,0.,1.)); +#207252 = ORIENTED_EDGE('',*,*,#207253,.F.); +#207253 = EDGE_CURVE('',#207215,#207246,#207254,.T.); +#207254 = LINE('',#207255,#207256); +#207255 = CARTESIAN_POINT('',(124.533578,-61.55,1.51)); +#207256 = VECTOR('',#207257,1.); +#207257 = DIRECTION('',(-1.,0.,0.)); +#207258 = PLANE('',#207259); +#207259 = AXIS2_PLACEMENT_3D('',#207260,#207261,#207262); +#207260 = CARTESIAN_POINT('',(124.533578,-61.55,1.51)); +#207261 = DIRECTION('',(0.,-1.,0.)); +#207262 = DIRECTION('',(-1.,0.,0.)); +#207263 = ADVANCED_FACE('',(#207264),#207289,.T.); +#207264 = FACE_BOUND('',#207265,.T.); +#207265 = EDGE_LOOP('',(#207266,#207267,#207275,#207283)); +#207266 = ORIENTED_EDGE('',*,*,#207245,.T.); +#207267 = ORIENTED_EDGE('',*,*,#207268,.T.); +#207268 = EDGE_CURVE('',#207238,#207269,#207271,.T.); +#207269 = VERTEX_POINT('',#207270); +#207270 = CARTESIAN_POINT('',(122.525,-61.791422,1.545)); +#207271 = LINE('',#207272,#207273); +#207272 = CARTESIAN_POINT('',(122.766422,-61.55,1.545)); +#207273 = VECTOR('',#207274,1.); +#207274 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#207275 = ORIENTED_EDGE('',*,*,#207276,.F.); +#207276 = EDGE_CURVE('',#207277,#207269,#207279,.T.); +#207277 = VERTEX_POINT('',#207278); +#207278 = CARTESIAN_POINT('',(122.525,-61.791422,1.51)); +#207279 = LINE('',#207280,#207281); +#207280 = CARTESIAN_POINT('',(122.525,-61.791422,1.51)); +#207281 = VECTOR('',#207282,1.); +#207282 = DIRECTION('',(0.,0.,1.)); +#207283 = ORIENTED_EDGE('',*,*,#207284,.F.); +#207284 = EDGE_CURVE('',#207246,#207277,#207285,.T.); +#207285 = LINE('',#207286,#207287); +#207286 = CARTESIAN_POINT('',(122.766422,-61.55,1.51)); +#207287 = VECTOR('',#207288,1.); +#207288 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#207289 = PLANE('',#207290); +#207290 = AXIS2_PLACEMENT_3D('',#207291,#207292,#207293); +#207291 = CARTESIAN_POINT('',(122.766422,-61.55,1.51)); +#207292 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#207293 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#207294 = ADVANCED_FACE('',(#207295),#207320,.T.); +#207295 = FACE_BOUND('',#207296,.T.); +#207296 = EDGE_LOOP('',(#207297,#207298,#207306,#207314)); +#207297 = ORIENTED_EDGE('',*,*,#207276,.T.); +#207298 = ORIENTED_EDGE('',*,*,#207299,.T.); +#207299 = EDGE_CURVE('',#207269,#207300,#207302,.T.); +#207300 = VERTEX_POINT('',#207301); +#207301 = CARTESIAN_POINT('',(122.523079,-62.669509,1.545)); +#207302 = LINE('',#207303,#207304); +#207303 = CARTESIAN_POINT('',(122.525,-61.791422,1.545)); +#207304 = VECTOR('',#207305,1.); +#207305 = DIRECTION('',(-2.187705094142E-03,-0.99999760697,0.)); +#207306 = ORIENTED_EDGE('',*,*,#207307,.F.); +#207307 = EDGE_CURVE('',#207308,#207300,#207310,.T.); +#207308 = VERTEX_POINT('',#207309); +#207309 = CARTESIAN_POINT('',(122.523079,-62.669509,1.51)); +#207310 = LINE('',#207311,#207312); +#207311 = CARTESIAN_POINT('',(122.523079,-62.669509,1.51)); +#207312 = VECTOR('',#207313,1.); +#207313 = DIRECTION('',(0.,0.,1.)); +#207314 = ORIENTED_EDGE('',*,*,#207315,.F.); +#207315 = EDGE_CURVE('',#207277,#207308,#207316,.T.); +#207316 = LINE('',#207317,#207318); +#207317 = CARTESIAN_POINT('',(122.525,-61.791422,1.51)); +#207318 = VECTOR('',#207319,1.); +#207319 = DIRECTION('',(-2.187705094142E-03,-0.99999760697,0.)); +#207320 = PLANE('',#207321); +#207321 = AXIS2_PLACEMENT_3D('',#207322,#207323,#207324); +#207322 = CARTESIAN_POINT('',(122.525,-61.791422,1.51)); +#207323 = DIRECTION('',(0.99999760697,-2.187705094142E-03,0.)); +#207324 = DIRECTION('',(-2.187705094142E-03,-0.99999760697,0.)); +#207325 = ADVANCED_FACE('',(#207326),#207353,.T.); +#207326 = FACE_BOUND('',#207327,.T.); +#207327 = EDGE_LOOP('',(#207328,#207329,#207338,#207346)); +#207328 = ORIENTED_EDGE('',*,*,#207307,.T.); +#207329 = ORIENTED_EDGE('',*,*,#207330,.T.); +#207330 = EDGE_CURVE('',#207300,#207331,#207333,.T.); +#207331 = VERTEX_POINT('',#207332); +#207332 = CARTESIAN_POINT('',(122.444509,-62.748079,1.545)); +#207333 = CIRCLE('',#207334,0.100002891901); +#207334 = AXIS2_PLACEMENT_3D('',#207335,#207336,#207337); +#207335 = CARTESIAN_POINT('',(122.42499792896,-62.64999792896,1.545)); +#207336 = DIRECTION('',(0.,0.,-1.)); +#207337 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#207338 = ORIENTED_EDGE('',*,*,#207339,.F.); +#207339 = EDGE_CURVE('',#207340,#207331,#207342,.T.); +#207340 = VERTEX_POINT('',#207341); +#207341 = CARTESIAN_POINT('',(122.444509,-62.748079,1.51)); +#207342 = LINE('',#207343,#207344); +#207343 = CARTESIAN_POINT('',(122.444509,-62.748079,1.51)); +#207344 = VECTOR('',#207345,1.); +#207345 = DIRECTION('',(0.,0.,1.)); +#207346 = ORIENTED_EDGE('',*,*,#207347,.F.); +#207347 = EDGE_CURVE('',#207308,#207340,#207348,.T.); +#207348 = CIRCLE('',#207349,0.100002891901); +#207349 = AXIS2_PLACEMENT_3D('',#207350,#207351,#207352); +#207350 = CARTESIAN_POINT('',(122.42499792896,-62.64999792896,1.51)); +#207351 = DIRECTION('',(0.,0.,-1.)); +#207352 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#207353 = CYLINDRICAL_SURFACE('',#207354,0.100002891901); +#207354 = AXIS2_PLACEMENT_3D('',#207355,#207356,#207357); +#207355 = CARTESIAN_POINT('',(122.42499792896,-62.64999792896,1.51)); +#207356 = DIRECTION('',(0.,0.,-1.)); +#207357 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#207358 = ADVANCED_FACE('',(#207359),#207384,.T.); +#207359 = FACE_BOUND('',#207360,.T.); +#207360 = EDGE_LOOP('',(#207361,#207362,#207370,#207378)); +#207361 = ORIENTED_EDGE('',*,*,#207339,.T.); +#207362 = ORIENTED_EDGE('',*,*,#207363,.T.); +#207363 = EDGE_CURVE('',#207331,#207364,#207366,.T.); +#207364 = VERTEX_POINT('',#207365); +#207365 = CARTESIAN_POINT('',(122.396901,-62.74452,1.545)); +#207366 = LINE('',#207367,#207368); +#207367 = CARTESIAN_POINT('',(122.444509,-62.748079,1.545)); +#207368 = VECTOR('',#207369,1.); +#207369 = DIRECTION('',(-0.997217402073,7.454832662523E-02,0.)); +#207370 = ORIENTED_EDGE('',*,*,#207371,.F.); +#207371 = EDGE_CURVE('',#207372,#207364,#207374,.T.); +#207372 = VERTEX_POINT('',#207373); +#207373 = CARTESIAN_POINT('',(122.396901,-62.74452,1.51)); +#207374 = LINE('',#207375,#207376); +#207375 = CARTESIAN_POINT('',(122.396901,-62.74452,1.51)); +#207376 = VECTOR('',#207377,1.); +#207377 = DIRECTION('',(0.,0.,1.)); +#207378 = ORIENTED_EDGE('',*,*,#207379,.F.); +#207379 = EDGE_CURVE('',#207340,#207372,#207380,.T.); +#207380 = LINE('',#207381,#207382); +#207381 = CARTESIAN_POINT('',(122.444509,-62.748079,1.51)); +#207382 = VECTOR('',#207383,1.); +#207383 = DIRECTION('',(-0.997217402073,7.454832662523E-02,0.)); +#207384 = PLANE('',#207385); +#207385 = AXIS2_PLACEMENT_3D('',#207386,#207387,#207388); +#207386 = CARTESIAN_POINT('',(122.444509,-62.748079,1.51)); +#207387 = DIRECTION('',(-7.454832662523E-02,-0.997217402073,0.)); +#207388 = DIRECTION('',(-0.997217402073,7.454832662523E-02,0.)); +#207389 = ADVANCED_FACE('',(#207390),#207415,.T.); +#207390 = FACE_BOUND('',#207391,.T.); +#207391 = EDGE_LOOP('',(#207392,#207393,#207401,#207409)); +#207392 = ORIENTED_EDGE('',*,*,#207371,.T.); +#207393 = ORIENTED_EDGE('',*,*,#207394,.T.); +#207394 = EDGE_CURVE('',#207364,#207395,#207397,.T.); +#207395 = VERTEX_POINT('',#207396); +#207396 = CARTESIAN_POINT('',(121.8,-63.341422,1.545)); +#207397 = LINE('',#207398,#207399); +#207398 = CARTESIAN_POINT('',(122.396901,-62.74452,1.545)); +#207399 = VECTOR('',#207400,1.); +#207400 = DIRECTION('',(-0.707106188872,-0.707107373501,0.)); +#207401 = ORIENTED_EDGE('',*,*,#207402,.F.); +#207402 = EDGE_CURVE('',#207403,#207395,#207405,.T.); +#207403 = VERTEX_POINT('',#207404); +#207404 = CARTESIAN_POINT('',(121.8,-63.341422,1.51)); +#207405 = LINE('',#207406,#207407); +#207406 = CARTESIAN_POINT('',(121.8,-63.341422,1.51)); +#207407 = VECTOR('',#207408,1.); +#207408 = DIRECTION('',(0.,0.,1.)); +#207409 = ORIENTED_EDGE('',*,*,#207410,.F.); +#207410 = EDGE_CURVE('',#207372,#207403,#207411,.T.); +#207411 = LINE('',#207412,#207413); +#207412 = CARTESIAN_POINT('',(122.396901,-62.74452,1.51)); +#207413 = VECTOR('',#207414,1.); +#207414 = DIRECTION('',(-0.707106188872,-0.707107373501,0.)); +#207415 = PLANE('',#207416); +#207416 = AXIS2_PLACEMENT_3D('',#207417,#207418,#207419); +#207417 = CARTESIAN_POINT('',(122.396901,-62.74452,1.51)); +#207418 = DIRECTION('',(0.707107373501,-0.707106188872,0.)); +#207419 = DIRECTION('',(-0.707106188872,-0.707107373501,0.)); +#207420 = ADVANCED_FACE('',(#207421),#207446,.T.); +#207421 = FACE_BOUND('',#207422,.T.); +#207422 = EDGE_LOOP('',(#207423,#207424,#207432,#207440)); +#207423 = ORIENTED_EDGE('',*,*,#207402,.T.); +#207424 = ORIENTED_EDGE('',*,*,#207425,.T.); +#207425 = EDGE_CURVE('',#207395,#207426,#207428,.T.); +#207426 = VERTEX_POINT('',#207427); +#207427 = CARTESIAN_POINT('',(121.8,-63.818869,1.545)); +#207428 = LINE('',#207429,#207430); +#207429 = CARTESIAN_POINT('',(121.8,-63.341422,1.545)); +#207430 = VECTOR('',#207431,1.); +#207431 = DIRECTION('',(0.,-1.,0.)); +#207432 = ORIENTED_EDGE('',*,*,#207433,.F.); +#207433 = EDGE_CURVE('',#207434,#207426,#207436,.T.); +#207434 = VERTEX_POINT('',#207435); +#207435 = CARTESIAN_POINT('',(121.8,-63.818869,1.51)); +#207436 = LINE('',#207437,#207438); +#207437 = CARTESIAN_POINT('',(121.8,-63.818869,1.51)); +#207438 = VECTOR('',#207439,1.); +#207439 = DIRECTION('',(0.,0.,1.)); +#207440 = ORIENTED_EDGE('',*,*,#207441,.F.); +#207441 = EDGE_CURVE('',#207403,#207434,#207442,.T.); +#207442 = LINE('',#207443,#207444); +#207443 = CARTESIAN_POINT('',(121.8,-63.341422,1.51)); +#207444 = VECTOR('',#207445,1.); +#207445 = DIRECTION('',(0.,-1.,0.)); +#207446 = PLANE('',#207447); +#207447 = AXIS2_PLACEMENT_3D('',#207448,#207449,#207450); +#207448 = CARTESIAN_POINT('',(121.8,-63.341422,1.51)); +#207449 = DIRECTION('',(1.,0.,-0.)); +#207450 = DIRECTION('',(0.,-1.,0.)); +#207451 = ADVANCED_FACE('',(#207452),#207477,.T.); +#207452 = FACE_BOUND('',#207453,.T.); +#207453 = EDGE_LOOP('',(#207454,#207455,#207463,#207471)); +#207454 = ORIENTED_EDGE('',*,*,#207433,.T.); +#207455 = ORIENTED_EDGE('',*,*,#207456,.T.); +#207456 = EDGE_CURVE('',#207426,#207457,#207459,.T.); +#207457 = VERTEX_POINT('',#207458); +#207458 = CARTESIAN_POINT('',(121.814805,-63.822836,1.545)); +#207459 = LINE('',#207460,#207461); +#207460 = CARTESIAN_POINT('',(121.8,-63.818869,1.545)); +#207461 = VECTOR('',#207462,1.); +#207462 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#207463 = ORIENTED_EDGE('',*,*,#207464,.F.); +#207464 = EDGE_CURVE('',#207465,#207457,#207467,.T.); +#207465 = VERTEX_POINT('',#207466); +#207466 = CARTESIAN_POINT('',(121.814805,-63.822836,1.51)); +#207467 = LINE('',#207468,#207469); +#207468 = CARTESIAN_POINT('',(121.814805,-63.822836,1.51)); +#207469 = VECTOR('',#207470,1.); +#207470 = DIRECTION('',(0.,0.,1.)); +#207471 = ORIENTED_EDGE('',*,*,#207472,.F.); +#207472 = EDGE_CURVE('',#207434,#207465,#207473,.T.); +#207473 = LINE('',#207474,#207475); +#207474 = CARTESIAN_POINT('',(121.8,-63.818869,1.51)); +#207475 = VECTOR('',#207476,1.); +#207476 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#207477 = PLANE('',#207478); +#207478 = AXIS2_PLACEMENT_3D('',#207479,#207480,#207481); +#207479 = CARTESIAN_POINT('',(121.8,-63.818869,1.51)); +#207480 = DIRECTION('',(0.258819788119,0.965925627198,-0.)); +#207481 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#207482 = ADVANCED_FACE('',(#207483),#207510,.T.); +#207483 = FACE_BOUND('',#207484,.T.); +#207484 = EDGE_LOOP('',(#207485,#207486,#207495,#207503)); +#207485 = ORIENTED_EDGE('',*,*,#207464,.T.); +#207486 = ORIENTED_EDGE('',*,*,#207487,.T.); +#207487 = EDGE_CURVE('',#207457,#207488,#207490,.T.); +#207488 = VERTEX_POINT('',#207489); +#207489 = CARTESIAN_POINT('',(121.585195,-63.822836,1.545)); +#207490 = CIRCLE('',#207491,0.299999850918); +#207491 = AXIS2_PLACEMENT_3D('',#207492,#207493,#207494); +#207492 = CARTESIAN_POINT('',(121.7,-64.09999971069,1.545)); +#207493 = DIRECTION('',(0.,0.,-1.)); +#207494 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#207495 = ORIENTED_EDGE('',*,*,#207496,.F.); +#207496 = EDGE_CURVE('',#207497,#207488,#207499,.T.); +#207497 = VERTEX_POINT('',#207498); +#207498 = CARTESIAN_POINT('',(121.585195,-63.822836,1.51)); +#207499 = LINE('',#207500,#207501); +#207500 = CARTESIAN_POINT('',(121.585195,-63.822836,1.51)); +#207501 = VECTOR('',#207502,1.); +#207502 = DIRECTION('',(0.,0.,1.)); +#207503 = ORIENTED_EDGE('',*,*,#207504,.F.); +#207504 = EDGE_CURVE('',#207465,#207497,#207505,.T.); +#207505 = CIRCLE('',#207506,0.299999850918); +#207506 = AXIS2_PLACEMENT_3D('',#207507,#207508,#207509); +#207507 = CARTESIAN_POINT('',(121.7,-64.09999971069,1.51)); +#207508 = DIRECTION('',(0.,0.,-1.)); +#207509 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#207510 = CYLINDRICAL_SURFACE('',#207511,0.299999850918); +#207511 = AXIS2_PLACEMENT_3D('',#207512,#207513,#207514); +#207512 = CARTESIAN_POINT('',(121.7,-64.09999971069,1.51)); +#207513 = DIRECTION('',(0.,0.,-1.)); +#207514 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#207515 = ADVANCED_FACE('',(#207516),#207541,.T.); +#207516 = FACE_BOUND('',#207517,.T.); +#207517 = EDGE_LOOP('',(#207518,#207519,#207527,#207535)); +#207518 = ORIENTED_EDGE('',*,*,#207496,.T.); +#207519 = ORIENTED_EDGE('',*,*,#207520,.T.); +#207520 = EDGE_CURVE('',#207488,#207521,#207523,.T.); +#207521 = VERTEX_POINT('',#207522); +#207522 = CARTESIAN_POINT('',(121.6,-63.818869,1.545)); +#207523 = LINE('',#207524,#207525); +#207524 = CARTESIAN_POINT('',(121.585195,-63.822836,1.545)); +#207525 = VECTOR('',#207526,1.); +#207526 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#207527 = ORIENTED_EDGE('',*,*,#207528,.F.); +#207528 = EDGE_CURVE('',#207529,#207521,#207531,.T.); +#207529 = VERTEX_POINT('',#207530); +#207530 = CARTESIAN_POINT('',(121.6,-63.818869,1.51)); +#207531 = LINE('',#207532,#207533); +#207532 = CARTESIAN_POINT('',(121.6,-63.818869,1.51)); +#207533 = VECTOR('',#207534,1.); +#207534 = DIRECTION('',(0.,0.,1.)); +#207535 = ORIENTED_EDGE('',*,*,#207536,.F.); +#207536 = EDGE_CURVE('',#207497,#207529,#207537,.T.); +#207537 = LINE('',#207538,#207539); +#207538 = CARTESIAN_POINT('',(121.585195,-63.822836,1.51)); +#207539 = VECTOR('',#207540,1.); +#207540 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#207541 = PLANE('',#207542); +#207542 = AXIS2_PLACEMENT_3D('',#207543,#207544,#207545); +#207543 = CARTESIAN_POINT('',(121.585195,-63.822836,1.51)); +#207544 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#207545 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#207546 = ADVANCED_FACE('',(#207547),#207572,.T.); +#207547 = FACE_BOUND('',#207548,.T.); +#207548 = EDGE_LOOP('',(#207549,#207550,#207558,#207566)); +#207549 = ORIENTED_EDGE('',*,*,#207528,.T.); +#207550 = ORIENTED_EDGE('',*,*,#207551,.T.); +#207551 = EDGE_CURVE('',#207521,#207552,#207554,.T.); +#207552 = VERTEX_POINT('',#207553); +#207553 = CARTESIAN_POINT('',(121.601921,-63.280491,1.545)); +#207554 = LINE('',#207555,#207556); +#207555 = CARTESIAN_POINT('',(121.6,-63.818869,1.545)); +#207556 = VECTOR('',#207557,1.); +#207557 = DIRECTION('',(3.568102284094E-03,0.999993634303,0.)); +#207558 = ORIENTED_EDGE('',*,*,#207559,.F.); +#207559 = EDGE_CURVE('',#207560,#207552,#207562,.T.); +#207560 = VERTEX_POINT('',#207561); +#207561 = CARTESIAN_POINT('',(121.601921,-63.280491,1.51)); +#207562 = LINE('',#207563,#207564); +#207563 = CARTESIAN_POINT('',(121.601921,-63.280491,1.51)); +#207564 = VECTOR('',#207565,1.); +#207565 = DIRECTION('',(0.,0.,1.)); +#207566 = ORIENTED_EDGE('',*,*,#207567,.F.); +#207567 = EDGE_CURVE('',#207529,#207560,#207568,.T.); +#207568 = LINE('',#207569,#207570); +#207569 = CARTESIAN_POINT('',(121.6,-63.818869,1.51)); +#207570 = VECTOR('',#207571,1.); +#207571 = DIRECTION('',(3.568102284094E-03,0.999993634303,0.)); +#207572 = PLANE('',#207573); +#207573 = AXIS2_PLACEMENT_3D('',#207574,#207575,#207576); +#207574 = CARTESIAN_POINT('',(121.6,-63.818869,1.51)); +#207575 = DIRECTION('',(-0.999993634303,3.568102284094E-03,0.)); +#207576 = DIRECTION('',(3.568102284094E-03,0.999993634303,0.)); +#207577 = ADVANCED_FACE('',(#207578),#207603,.T.); +#207578 = FACE_BOUND('',#207579,.T.); +#207579 = EDGE_LOOP('',(#207580,#207581,#207589,#207597)); +#207580 = ORIENTED_EDGE('',*,*,#207559,.T.); +#207581 = ORIENTED_EDGE('',*,*,#207582,.T.); +#207582 = EDGE_CURVE('',#207552,#207583,#207585,.T.); +#207583 = VERTEX_POINT('',#207584); +#207584 = CARTESIAN_POINT('',(121.616853,-63.244443,1.545)); +#207585 = LINE('',#207586,#207587); +#207586 = CARTESIAN_POINT('',(121.601921,-63.280491,1.545)); +#207587 = VECTOR('',#207588,1.); +#207588 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207589 = ORIENTED_EDGE('',*,*,#207590,.F.); +#207590 = EDGE_CURVE('',#207591,#207583,#207593,.T.); +#207591 = VERTEX_POINT('',#207592); +#207592 = CARTESIAN_POINT('',(121.616853,-63.244443,1.51)); +#207593 = LINE('',#207594,#207595); +#207594 = CARTESIAN_POINT('',(121.616853,-63.244443,1.51)); +#207595 = VECTOR('',#207596,1.); +#207596 = DIRECTION('',(0.,0.,1.)); +#207597 = ORIENTED_EDGE('',*,*,#207598,.F.); +#207598 = EDGE_CURVE('',#207560,#207591,#207599,.T.); +#207599 = LINE('',#207600,#207601); +#207600 = CARTESIAN_POINT('',(121.601921,-63.280491,1.51)); +#207601 = VECTOR('',#207602,1.); +#207602 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207603 = PLANE('',#207604); +#207604 = AXIS2_PLACEMENT_3D('',#207605,#207606,#207607); +#207605 = CARTESIAN_POINT('',(121.601921,-63.280491,1.51)); +#207606 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#207607 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207608 = ADVANCED_FACE('',(#207609),#207634,.T.); +#207609 = FACE_BOUND('',#207610,.T.); +#207610 = EDGE_LOOP('',(#207611,#207612,#207620,#207628)); +#207611 = ORIENTED_EDGE('',*,*,#207590,.T.); +#207612 = ORIENTED_EDGE('',*,*,#207613,.T.); +#207613 = EDGE_CURVE('',#207583,#207614,#207616,.T.); +#207614 = VERTEX_POINT('',#207615); +#207615 = CARTESIAN_POINT('',(122.294443,-62.566853,1.545)); +#207616 = LINE('',#207617,#207618); +#207617 = CARTESIAN_POINT('',(121.616853,-63.244443,1.545)); +#207618 = VECTOR('',#207619,1.); +#207619 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207620 = ORIENTED_EDGE('',*,*,#207621,.F.); +#207621 = EDGE_CURVE('',#207622,#207614,#207624,.T.); +#207622 = VERTEX_POINT('',#207623); +#207623 = CARTESIAN_POINT('',(122.294443,-62.566853,1.51)); +#207624 = LINE('',#207625,#207626); +#207625 = CARTESIAN_POINT('',(122.294443,-62.566853,1.51)); +#207626 = VECTOR('',#207627,1.); +#207627 = DIRECTION('',(0.,0.,1.)); +#207628 = ORIENTED_EDGE('',*,*,#207629,.F.); +#207629 = EDGE_CURVE('',#207591,#207622,#207630,.T.); +#207630 = LINE('',#207631,#207632); +#207631 = CARTESIAN_POINT('',(121.616853,-63.244443,1.51)); +#207632 = VECTOR('',#207633,1.); +#207633 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207634 = PLANE('',#207635); +#207635 = AXIS2_PLACEMENT_3D('',#207636,#207637,#207638); +#207636 = CARTESIAN_POINT('',(121.616853,-63.244443,1.51)); +#207637 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207638 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207639 = ADVANCED_FACE('',(#207640),#207665,.T.); +#207640 = FACE_BOUND('',#207641,.T.); +#207641 = EDGE_LOOP('',(#207642,#207643,#207651,#207659)); +#207642 = ORIENTED_EDGE('',*,*,#207621,.T.); +#207643 = ORIENTED_EDGE('',*,*,#207644,.T.); +#207644 = EDGE_CURVE('',#207614,#207645,#207647,.T.); +#207645 = VERTEX_POINT('',#207646); +#207646 = CARTESIAN_POINT('',(122.325,-62.554195,1.545)); +#207647 = LINE('',#207648,#207649); +#207648 = CARTESIAN_POINT('',(122.294443,-62.566853,1.545)); +#207649 = VECTOR('',#207650,1.); +#207650 = DIRECTION('',(0.923870166413,0.382706043344,0.)); +#207651 = ORIENTED_EDGE('',*,*,#207652,.F.); +#207652 = EDGE_CURVE('',#207653,#207645,#207655,.T.); +#207653 = VERTEX_POINT('',#207654); +#207654 = CARTESIAN_POINT('',(122.325,-62.554195,1.51)); +#207655 = LINE('',#207656,#207657); +#207656 = CARTESIAN_POINT('',(122.325,-62.554195,1.51)); +#207657 = VECTOR('',#207658,1.); +#207658 = DIRECTION('',(0.,0.,1.)); +#207659 = ORIENTED_EDGE('',*,*,#207660,.F.); +#207660 = EDGE_CURVE('',#207622,#207653,#207661,.T.); +#207661 = LINE('',#207662,#207663); +#207662 = CARTESIAN_POINT('',(122.294443,-62.566853,1.51)); +#207663 = VECTOR('',#207664,1.); +#207664 = DIRECTION('',(0.923870166413,0.382706043344,0.)); +#207665 = PLANE('',#207666); +#207666 = AXIS2_PLACEMENT_3D('',#207667,#207668,#207669); +#207667 = CARTESIAN_POINT('',(122.294443,-62.566853,1.51)); +#207668 = DIRECTION('',(-0.382706043344,0.923870166413,0.)); +#207669 = DIRECTION('',(0.923870166413,0.382706043344,0.)); +#207670 = ADVANCED_FACE('',(#207671),#207696,.T.); +#207671 = FACE_BOUND('',#207672,.T.); +#207672 = EDGE_LOOP('',(#207673,#207674,#207682,#207690)); +#207673 = ORIENTED_EDGE('',*,*,#207652,.T.); +#207674 = ORIENTED_EDGE('',*,*,#207675,.T.); +#207675 = EDGE_CURVE('',#207645,#207676,#207678,.T.); +#207676 = VERTEX_POINT('',#207677); +#207677 = CARTESIAN_POINT('',(122.326921,-61.730491,1.545)); +#207678 = LINE('',#207679,#207680); +#207679 = CARTESIAN_POINT('',(122.325,-62.554195,1.545)); +#207680 = VECTOR('',#207681,1.); +#207681 = DIRECTION('',(2.332142099514E-03,0.999997280553,0.)); +#207682 = ORIENTED_EDGE('',*,*,#207683,.F.); +#207683 = EDGE_CURVE('',#207684,#207676,#207686,.T.); +#207684 = VERTEX_POINT('',#207685); +#207685 = CARTESIAN_POINT('',(122.326921,-61.730491,1.51)); +#207686 = LINE('',#207687,#207688); +#207687 = CARTESIAN_POINT('',(122.326921,-61.730491,1.51)); +#207688 = VECTOR('',#207689,1.); +#207689 = DIRECTION('',(0.,0.,1.)); +#207690 = ORIENTED_EDGE('',*,*,#207691,.F.); +#207691 = EDGE_CURVE('',#207653,#207684,#207692,.T.); +#207692 = LINE('',#207693,#207694); +#207693 = CARTESIAN_POINT('',(122.325,-62.554195,1.51)); +#207694 = VECTOR('',#207695,1.); +#207695 = DIRECTION('',(2.332142099514E-03,0.999997280553,0.)); +#207696 = PLANE('',#207697); +#207697 = AXIS2_PLACEMENT_3D('',#207698,#207699,#207700); +#207698 = CARTESIAN_POINT('',(122.325,-62.554195,1.51)); +#207699 = DIRECTION('',(-0.999997280553,2.332142099514E-03,0.)); +#207700 = DIRECTION('',(2.332142099514E-03,0.999997280553,0.)); +#207701 = ADVANCED_FACE('',(#207702),#207727,.T.); +#207702 = FACE_BOUND('',#207703,.T.); +#207703 = EDGE_LOOP('',(#207704,#207705,#207713,#207721)); +#207704 = ORIENTED_EDGE('',*,*,#207683,.T.); +#207705 = ORIENTED_EDGE('',*,*,#207706,.T.); +#207706 = EDGE_CURVE('',#207676,#207707,#207709,.T.); +#207707 = VERTEX_POINT('',#207708); +#207708 = CARTESIAN_POINT('',(122.341853,-61.694443,1.545)); +#207709 = LINE('',#207710,#207711); +#207710 = CARTESIAN_POINT('',(122.326921,-61.730491,1.545)); +#207711 = VECTOR('',#207712,1.); +#207712 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207713 = ORIENTED_EDGE('',*,*,#207714,.F.); +#207714 = EDGE_CURVE('',#207715,#207707,#207717,.T.); +#207715 = VERTEX_POINT('',#207716); +#207716 = CARTESIAN_POINT('',(122.341853,-61.694443,1.51)); +#207717 = LINE('',#207718,#207719); +#207718 = CARTESIAN_POINT('',(122.341853,-61.694443,1.51)); +#207719 = VECTOR('',#207720,1.); +#207720 = DIRECTION('',(0.,0.,1.)); +#207721 = ORIENTED_EDGE('',*,*,#207722,.F.); +#207722 = EDGE_CURVE('',#207684,#207715,#207723,.T.); +#207723 = LINE('',#207724,#207725); +#207724 = CARTESIAN_POINT('',(122.326921,-61.730491,1.51)); +#207725 = VECTOR('',#207726,1.); +#207726 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207727 = PLANE('',#207728); +#207728 = AXIS2_PLACEMENT_3D('',#207729,#207730,#207731); +#207729 = CARTESIAN_POINT('',(122.326921,-61.730491,1.51)); +#207730 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#207731 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#207732 = ADVANCED_FACE('',(#207733),#207749,.T.); +#207733 = FACE_BOUND('',#207734,.T.); +#207734 = EDGE_LOOP('',(#207735,#207736,#207742,#207743)); +#207735 = ORIENTED_EDGE('',*,*,#207714,.T.); +#207736 = ORIENTED_EDGE('',*,*,#207737,.T.); +#207737 = EDGE_CURVE('',#207707,#206205,#207738,.T.); +#207738 = LINE('',#207739,#207740); +#207739 = CARTESIAN_POINT('',(122.341853,-61.694443,1.545)); +#207740 = VECTOR('',#207741,1.); +#207741 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207742 = ORIENTED_EDGE('',*,*,#206202,.F.); +#207743 = ORIENTED_EDGE('',*,*,#207744,.F.); +#207744 = EDGE_CURVE('',#207715,#206203,#207745,.T.); +#207745 = LINE('',#207746,#207747); +#207746 = CARTESIAN_POINT('',(122.341853,-61.694443,1.51)); +#207747 = VECTOR('',#207748,1.); +#207748 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207749 = PLANE('',#207750); +#207750 = AXIS2_PLACEMENT_3D('',#207751,#207752,#207753); +#207751 = CARTESIAN_POINT('',(122.341853,-61.694443,1.51)); +#207752 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#207753 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#207754 = ADVANCED_FACE('',(#207755),#207782,.F.); +#207755 = FACE_BOUND('',#207756,.T.); +#207756 = EDGE_LOOP('',(#207757,#207767,#207774,#207775)); +#207757 = ORIENTED_EDGE('',*,*,#207758,.T.); +#207758 = EDGE_CURVE('',#207759,#207761,#207763,.T.); +#207759 = VERTEX_POINT('',#207760); +#207760 = CARTESIAN_POINT('',(121.837255,-64.1,1.51)); +#207761 = VERTEX_POINT('',#207762); +#207762 = CARTESIAN_POINT('',(121.837255,-64.1,1.545)); +#207763 = LINE('',#207764,#207765); +#207764 = CARTESIAN_POINT('',(121.837255,-64.1,1.51)); +#207765 = VECTOR('',#207766,1.); +#207766 = DIRECTION('',(0.,0.,1.)); +#207767 = ORIENTED_EDGE('',*,*,#207768,.T.); +#207768 = EDGE_CURVE('',#207761,#207761,#207769,.T.); +#207769 = CIRCLE('',#207770,0.137255); +#207770 = AXIS2_PLACEMENT_3D('',#207771,#207772,#207773); +#207771 = CARTESIAN_POINT('',(121.7,-64.1,1.545)); +#207772 = DIRECTION('',(0.,0.,1.)); +#207773 = DIRECTION('',(1.,0.,-0.)); +#207774 = ORIENTED_EDGE('',*,*,#207758,.F.); +#207775 = ORIENTED_EDGE('',*,*,#207776,.F.); +#207776 = EDGE_CURVE('',#207759,#207759,#207777,.T.); +#207777 = CIRCLE('',#207778,0.137255); +#207778 = AXIS2_PLACEMENT_3D('',#207779,#207780,#207781); +#207779 = CARTESIAN_POINT('',(121.7,-64.1,1.51)); +#207780 = DIRECTION('',(0.,0.,1.)); +#207781 = DIRECTION('',(1.,0.,-0.)); +#207782 = CYLINDRICAL_SURFACE('',#207783,0.137255); +#207783 = AXIS2_PLACEMENT_3D('',#207784,#207785,#207786); +#207784 = CARTESIAN_POINT('',(121.7,-64.1,1.51)); +#207785 = DIRECTION('',(-0.,-0.,-1.)); +#207786 = DIRECTION('',(1.,0.,-0.)); +#207787 = ADVANCED_FACE('',(#207788,#207840),#207843,.F.); +#207788 = FACE_BOUND('',#207789,.T.); +#207789 = EDGE_LOOP('',(#207790,#207791,#207792,#207793,#207794,#207795, + #207796,#207797,#207798,#207799,#207800,#207801,#207802,#207803, + #207804,#207805,#207806,#207807,#207808,#207809,#207810,#207811, + #207812,#207813,#207814,#207815,#207816,#207817,#207818,#207819, + #207820,#207821,#207822,#207823,#207824,#207825,#207826,#207827, + #207828,#207829,#207830,#207831,#207832,#207833,#207834,#207835, + #207836,#207837,#207838,#207839)); +#207790 = ORIENTED_EDGE('',*,*,#206228,.T.); +#207791 = ORIENTED_EDGE('',*,*,#206259,.T.); +#207792 = ORIENTED_EDGE('',*,*,#206290,.T.); +#207793 = ORIENTED_EDGE('',*,*,#206321,.T.); +#207794 = ORIENTED_EDGE('',*,*,#206352,.T.); +#207795 = ORIENTED_EDGE('',*,*,#206383,.T.); +#207796 = ORIENTED_EDGE('',*,*,#206414,.T.); +#207797 = ORIENTED_EDGE('',*,*,#206445,.T.); +#207798 = ORIENTED_EDGE('',*,*,#206476,.T.); +#207799 = ORIENTED_EDGE('',*,*,#206507,.T.); +#207800 = ORIENTED_EDGE('',*,*,#206538,.T.); +#207801 = ORIENTED_EDGE('',*,*,#206569,.T.); +#207802 = ORIENTED_EDGE('',*,*,#206600,.T.); +#207803 = ORIENTED_EDGE('',*,*,#206631,.T.); +#207804 = ORIENTED_EDGE('',*,*,#206662,.T.); +#207805 = ORIENTED_EDGE('',*,*,#206693,.T.); +#207806 = ORIENTED_EDGE('',*,*,#206724,.T.); +#207807 = ORIENTED_EDGE('',*,*,#206755,.T.); +#207808 = ORIENTED_EDGE('',*,*,#206787,.T.); +#207809 = ORIENTED_EDGE('',*,*,#206819,.T.); +#207810 = ORIENTED_EDGE('',*,*,#206850,.T.); +#207811 = ORIENTED_EDGE('',*,*,#206881,.T.); +#207812 = ORIENTED_EDGE('',*,*,#206912,.T.); +#207813 = ORIENTED_EDGE('',*,*,#206943,.T.); +#207814 = ORIENTED_EDGE('',*,*,#206974,.T.); +#207815 = ORIENTED_EDGE('',*,*,#207005,.T.); +#207816 = ORIENTED_EDGE('',*,*,#207036,.T.); +#207817 = ORIENTED_EDGE('',*,*,#207067,.T.); +#207818 = ORIENTED_EDGE('',*,*,#207098,.T.); +#207819 = ORIENTED_EDGE('',*,*,#207129,.T.); +#207820 = ORIENTED_EDGE('',*,*,#207160,.T.); +#207821 = ORIENTED_EDGE('',*,*,#207191,.T.); +#207822 = ORIENTED_EDGE('',*,*,#207222,.T.); +#207823 = ORIENTED_EDGE('',*,*,#207253,.T.); +#207824 = ORIENTED_EDGE('',*,*,#207284,.T.); +#207825 = ORIENTED_EDGE('',*,*,#207315,.T.); +#207826 = ORIENTED_EDGE('',*,*,#207347,.T.); +#207827 = ORIENTED_EDGE('',*,*,#207379,.T.); +#207828 = ORIENTED_EDGE('',*,*,#207410,.T.); +#207829 = ORIENTED_EDGE('',*,*,#207441,.T.); +#207830 = ORIENTED_EDGE('',*,*,#207472,.T.); +#207831 = ORIENTED_EDGE('',*,*,#207504,.T.); +#207832 = ORIENTED_EDGE('',*,*,#207536,.T.); +#207833 = ORIENTED_EDGE('',*,*,#207567,.T.); +#207834 = ORIENTED_EDGE('',*,*,#207598,.T.); +#207835 = ORIENTED_EDGE('',*,*,#207629,.T.); +#207836 = ORIENTED_EDGE('',*,*,#207660,.T.); +#207837 = ORIENTED_EDGE('',*,*,#207691,.T.); +#207838 = ORIENTED_EDGE('',*,*,#207722,.T.); +#207839 = ORIENTED_EDGE('',*,*,#207744,.T.); +#207840 = FACE_BOUND('',#207841,.T.); +#207841 = EDGE_LOOP('',(#207842)); +#207842 = ORIENTED_EDGE('',*,*,#207776,.T.); +#207843 = PLANE('',#207844); +#207844 = AXIS2_PLACEMENT_3D('',#207845,#207846,#207847); +#207845 = CARTESIAN_POINT('',(0.,0.,1.51)); +#207846 = DIRECTION('',(0.,0.,1.)); +#207847 = DIRECTION('',(1.,0.,-0.)); +#207848 = ADVANCED_FACE('',(#207849,#207901),#207904,.T.); +#207849 = FACE_BOUND('',#207850,.F.); +#207850 = EDGE_LOOP('',(#207851,#207852,#207853,#207854,#207855,#207856, + #207857,#207858,#207859,#207860,#207861,#207862,#207863,#207864, + #207865,#207866,#207867,#207868,#207869,#207870,#207871,#207872, + #207873,#207874,#207875,#207876,#207877,#207878,#207879,#207880, + #207881,#207882,#207883,#207884,#207885,#207886,#207887,#207888, + #207889,#207890,#207891,#207892,#207893,#207894,#207895,#207896, + #207897,#207898,#207899,#207900)); +#207851 = ORIENTED_EDGE('',*,*,#206212,.T.); +#207852 = ORIENTED_EDGE('',*,*,#206243,.T.); +#207853 = ORIENTED_EDGE('',*,*,#206274,.T.); +#207854 = ORIENTED_EDGE('',*,*,#206305,.T.); +#207855 = ORIENTED_EDGE('',*,*,#206336,.T.); +#207856 = ORIENTED_EDGE('',*,*,#206367,.T.); +#207857 = ORIENTED_EDGE('',*,*,#206398,.T.); +#207858 = ORIENTED_EDGE('',*,*,#206429,.T.); +#207859 = ORIENTED_EDGE('',*,*,#206460,.T.); +#207860 = ORIENTED_EDGE('',*,*,#206491,.T.); +#207861 = ORIENTED_EDGE('',*,*,#206522,.T.); +#207862 = ORIENTED_EDGE('',*,*,#206553,.T.); +#207863 = ORIENTED_EDGE('',*,*,#206584,.T.); +#207864 = ORIENTED_EDGE('',*,*,#206615,.T.); +#207865 = ORIENTED_EDGE('',*,*,#206646,.T.); +#207866 = ORIENTED_EDGE('',*,*,#206677,.T.); +#207867 = ORIENTED_EDGE('',*,*,#206708,.T.); +#207868 = ORIENTED_EDGE('',*,*,#206739,.T.); +#207869 = ORIENTED_EDGE('',*,*,#206770,.T.); +#207870 = ORIENTED_EDGE('',*,*,#206803,.T.); +#207871 = ORIENTED_EDGE('',*,*,#206834,.T.); +#207872 = ORIENTED_EDGE('',*,*,#206865,.T.); +#207873 = ORIENTED_EDGE('',*,*,#206896,.T.); +#207874 = ORIENTED_EDGE('',*,*,#206927,.T.); +#207875 = ORIENTED_EDGE('',*,*,#206958,.T.); +#207876 = ORIENTED_EDGE('',*,*,#206989,.T.); +#207877 = ORIENTED_EDGE('',*,*,#207020,.T.); +#207878 = ORIENTED_EDGE('',*,*,#207051,.T.); +#207879 = ORIENTED_EDGE('',*,*,#207082,.T.); +#207880 = ORIENTED_EDGE('',*,*,#207113,.T.); +#207881 = ORIENTED_EDGE('',*,*,#207144,.T.); +#207882 = ORIENTED_EDGE('',*,*,#207175,.T.); +#207883 = ORIENTED_EDGE('',*,*,#207206,.T.); +#207884 = ORIENTED_EDGE('',*,*,#207237,.T.); +#207885 = ORIENTED_EDGE('',*,*,#207268,.T.); +#207886 = ORIENTED_EDGE('',*,*,#207299,.T.); +#207887 = ORIENTED_EDGE('',*,*,#207330,.T.); +#207888 = ORIENTED_EDGE('',*,*,#207363,.T.); +#207889 = ORIENTED_EDGE('',*,*,#207394,.T.); +#207890 = ORIENTED_EDGE('',*,*,#207425,.T.); +#207891 = ORIENTED_EDGE('',*,*,#207456,.T.); +#207892 = ORIENTED_EDGE('',*,*,#207487,.T.); +#207893 = ORIENTED_EDGE('',*,*,#207520,.T.); +#207894 = ORIENTED_EDGE('',*,*,#207551,.T.); +#207895 = ORIENTED_EDGE('',*,*,#207582,.T.); +#207896 = ORIENTED_EDGE('',*,*,#207613,.T.); +#207897 = ORIENTED_EDGE('',*,*,#207644,.T.); +#207898 = ORIENTED_EDGE('',*,*,#207675,.T.); +#207899 = ORIENTED_EDGE('',*,*,#207706,.T.); +#207900 = ORIENTED_EDGE('',*,*,#207737,.T.); +#207901 = FACE_BOUND('',#207902,.F.); +#207902 = EDGE_LOOP('',(#207903)); +#207903 = ORIENTED_EDGE('',*,*,#207768,.T.); +#207904 = PLANE('',#207905); +#207905 = AXIS2_PLACEMENT_3D('',#207906,#207907,#207908); +#207906 = CARTESIAN_POINT('',(0.,0.,1.545)); +#207907 = DIRECTION('',(0.,0.,1.)); +#207908 = DIRECTION('',(1.,0.,-0.)); +#207909 = MANIFOLD_SOLID_BREP('',#207910); +#207910 = CLOSED_SHELL('',(#207911,#207951,#207982,#208013,#208044, + #208075,#208106,#208137,#208168,#208199,#208230,#208261,#208292, + #208323,#208354,#208385,#208418,#208449,#208480,#208511,#208542, + #208573,#208604,#208635,#208666,#208697,#208728,#208759,#208790, + #208821,#208852,#208885,#208907,#208940,#208973,#209019)); +#207911 = ADVANCED_FACE('',(#207912),#207946,.F.); +#207912 = FACE_BOUND('',#207913,.F.); +#207913 = EDGE_LOOP('',(#207914,#207924,#207932,#207940)); +#207914 = ORIENTED_EDGE('',*,*,#207915,.T.); +#207915 = EDGE_CURVE('',#207916,#207918,#207920,.T.); +#207916 = VERTEX_POINT('',#207917); +#207917 = CARTESIAN_POINT('',(121.9695,-64.228078,0.)); +#207918 = VERTEX_POINT('',#207919); +#207919 = CARTESIAN_POINT('',(121.9695,-64.228078,-3.5E-02)); +#207920 = LINE('',#207921,#207922); +#207921 = CARTESIAN_POINT('',(121.9695,-64.228078,0.)); +#207922 = VECTOR('',#207923,1.); +#207923 = DIRECTION('',(0.,0.,-1.)); +#207924 = ORIENTED_EDGE('',*,*,#207925,.T.); +#207925 = EDGE_CURVE('',#207918,#207926,#207928,.T.); +#207926 = VERTEX_POINT('',#207927); +#207927 = CARTESIAN_POINT('',(122.841422,-65.1,-3.5E-02)); +#207928 = LINE('',#207929,#207930); +#207929 = CARTESIAN_POINT('',(121.9695,-64.228078,-3.5E-02)); +#207930 = VECTOR('',#207931,1.); +#207931 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#207932 = ORIENTED_EDGE('',*,*,#207933,.F.); +#207933 = EDGE_CURVE('',#207934,#207926,#207936,.T.); +#207934 = VERTEX_POINT('',#207935); +#207935 = CARTESIAN_POINT('',(122.841422,-65.1,0.)); +#207936 = LINE('',#207937,#207938); +#207937 = CARTESIAN_POINT('',(122.841422,-65.1,0.)); +#207938 = VECTOR('',#207939,1.); +#207939 = DIRECTION('',(0.,0.,-1.)); +#207940 = ORIENTED_EDGE('',*,*,#207941,.F.); +#207941 = EDGE_CURVE('',#207916,#207934,#207942,.T.); +#207942 = LINE('',#207943,#207944); +#207943 = CARTESIAN_POINT('',(121.9695,-64.228078,0.)); +#207944 = VECTOR('',#207945,1.); +#207945 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#207946 = PLANE('',#207947); +#207947 = AXIS2_PLACEMENT_3D('',#207948,#207949,#207950); +#207948 = CARTESIAN_POINT('',(121.9695,-64.228078,0.)); +#207949 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#207950 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#207951 = ADVANCED_FACE('',(#207952),#207977,.F.); +#207952 = FACE_BOUND('',#207953,.F.); +#207953 = EDGE_LOOP('',(#207954,#207955,#207963,#207971)); +#207954 = ORIENTED_EDGE('',*,*,#207933,.T.); +#207955 = ORIENTED_EDGE('',*,*,#207956,.T.); +#207956 = EDGE_CURVE('',#207926,#207957,#207959,.T.); +#207957 = VERTEX_POINT('',#207958); +#207958 = CARTESIAN_POINT('',(124.719509,-65.101921,-3.5E-02)); +#207959 = LINE('',#207960,#207961); +#207960 = CARTESIAN_POINT('',(122.841422,-65.1,-3.5E-02)); +#207961 = VECTOR('',#207962,1.); +#207962 = DIRECTION('',(0.99999947689,-1.022848779165E-03,0.)); +#207963 = ORIENTED_EDGE('',*,*,#207964,.F.); +#207964 = EDGE_CURVE('',#207965,#207957,#207967,.T.); +#207965 = VERTEX_POINT('',#207966); +#207966 = CARTESIAN_POINT('',(124.719509,-65.101921,0.)); +#207967 = LINE('',#207968,#207969); +#207968 = CARTESIAN_POINT('',(124.719509,-65.101921,0.)); +#207969 = VECTOR('',#207970,1.); +#207970 = DIRECTION('',(0.,0.,-1.)); +#207971 = ORIENTED_EDGE('',*,*,#207972,.F.); +#207972 = EDGE_CURVE('',#207934,#207965,#207973,.T.); +#207973 = LINE('',#207974,#207975); +#207974 = CARTESIAN_POINT('',(122.841422,-65.1,0.)); +#207975 = VECTOR('',#207976,1.); +#207976 = DIRECTION('',(0.99999947689,-1.022848779165E-03,0.)); +#207977 = PLANE('',#207978); +#207978 = AXIS2_PLACEMENT_3D('',#207979,#207980,#207981); +#207979 = CARTESIAN_POINT('',(122.841422,-65.1,0.)); +#207980 = DIRECTION('',(-1.022848779165E-03,-0.99999947689,-0.)); +#207981 = DIRECTION('',(0.99999947689,-1.022848779165E-03,0.)); +#207982 = ADVANCED_FACE('',(#207983),#208008,.F.); +#207983 = FACE_BOUND('',#207984,.F.); +#207984 = EDGE_LOOP('',(#207985,#207986,#207994,#208002)); +#207985 = ORIENTED_EDGE('',*,*,#207964,.T.); +#207986 = ORIENTED_EDGE('',*,*,#207987,.T.); +#207987 = EDGE_CURVE('',#207957,#207988,#207990,.T.); +#207988 = VERTEX_POINT('',#207989); +#207989 = CARTESIAN_POINT('',(124.755557,-65.116853,-3.5E-02)); +#207990 = LINE('',#207991,#207992); +#207991 = CARTESIAN_POINT('',(124.719509,-65.101921,-3.5E-02)); +#207992 = VECTOR('',#207993,1.); +#207993 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#207994 = ORIENTED_EDGE('',*,*,#207995,.F.); +#207995 = EDGE_CURVE('',#207996,#207988,#207998,.T.); +#207996 = VERTEX_POINT('',#207997); +#207997 = CARTESIAN_POINT('',(124.755557,-65.116853,0.)); +#207998 = LINE('',#207999,#208000); +#207999 = CARTESIAN_POINT('',(124.755557,-65.116853,0.)); +#208000 = VECTOR('',#208001,1.); +#208001 = DIRECTION('',(0.,0.,-1.)); +#208002 = ORIENTED_EDGE('',*,*,#208003,.F.); +#208003 = EDGE_CURVE('',#207965,#207996,#208004,.T.); +#208004 = LINE('',#208005,#208006); +#208005 = CARTESIAN_POINT('',(124.719509,-65.101921,0.)); +#208006 = VECTOR('',#208007,1.); +#208007 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#208008 = PLANE('',#208009); +#208009 = AXIS2_PLACEMENT_3D('',#208010,#208011,#208012); +#208010 = CARTESIAN_POINT('',(124.719509,-65.101921,0.)); +#208011 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#208012 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#208013 = ADVANCED_FACE('',(#208014),#208039,.F.); +#208014 = FACE_BOUND('',#208015,.F.); +#208015 = EDGE_LOOP('',(#208016,#208017,#208025,#208033)); +#208016 = ORIENTED_EDGE('',*,*,#207995,.T.); +#208017 = ORIENTED_EDGE('',*,*,#208018,.T.); +#208018 = EDGE_CURVE('',#207988,#208019,#208021,.T.); +#208019 = VERTEX_POINT('',#208020); +#208020 = CARTESIAN_POINT('',(126.983147,-67.344443,-3.5E-02)); +#208021 = LINE('',#208022,#208023); +#208022 = CARTESIAN_POINT('',(124.755557,-65.116853,-3.5E-02)); +#208023 = VECTOR('',#208024,1.); +#208024 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#208025 = ORIENTED_EDGE('',*,*,#208026,.F.); +#208026 = EDGE_CURVE('',#208027,#208019,#208029,.T.); +#208027 = VERTEX_POINT('',#208028); +#208028 = CARTESIAN_POINT('',(126.983147,-67.344443,0.)); +#208029 = LINE('',#208030,#208031); +#208030 = CARTESIAN_POINT('',(126.983147,-67.344443,0.)); +#208031 = VECTOR('',#208032,1.); +#208032 = DIRECTION('',(0.,0.,-1.)); +#208033 = ORIENTED_EDGE('',*,*,#208034,.F.); +#208034 = EDGE_CURVE('',#207996,#208027,#208035,.T.); +#208035 = LINE('',#208036,#208037); +#208036 = CARTESIAN_POINT('',(124.755557,-65.116853,0.)); +#208037 = VECTOR('',#208038,1.); +#208038 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#208039 = PLANE('',#208040); +#208040 = AXIS2_PLACEMENT_3D('',#208041,#208042,#208043); +#208041 = CARTESIAN_POINT('',(124.755557,-65.116853,0.)); +#208042 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#208043 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#208044 = ADVANCED_FACE('',(#208045),#208070,.F.); +#208045 = FACE_BOUND('',#208046,.F.); +#208046 = EDGE_LOOP('',(#208047,#208048,#208056,#208064)); +#208047 = ORIENTED_EDGE('',*,*,#208026,.T.); +#208048 = ORIENTED_EDGE('',*,*,#208049,.T.); +#208049 = EDGE_CURVE('',#208019,#208050,#208052,.T.); +#208050 = VERTEX_POINT('',#208051); +#208051 = CARTESIAN_POINT('',(126.998079,-67.380491,-3.5E-02)); +#208052 = LINE('',#208053,#208054); +#208053 = CARTESIAN_POINT('',(126.983147,-67.344443,-3.5E-02)); +#208054 = VECTOR('',#208055,1.); +#208055 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208056 = ORIENTED_EDGE('',*,*,#208057,.F.); +#208057 = EDGE_CURVE('',#208058,#208050,#208060,.T.); +#208058 = VERTEX_POINT('',#208059); +#208059 = CARTESIAN_POINT('',(126.998079,-67.380491,0.)); +#208060 = LINE('',#208061,#208062); +#208061 = CARTESIAN_POINT('',(126.998079,-67.380491,0.)); +#208062 = VECTOR('',#208063,1.); +#208063 = DIRECTION('',(0.,0.,-1.)); +#208064 = ORIENTED_EDGE('',*,*,#208065,.F.); +#208065 = EDGE_CURVE('',#208027,#208058,#208066,.T.); +#208066 = LINE('',#208067,#208068); +#208067 = CARTESIAN_POINT('',(126.983147,-67.344443,0.)); +#208068 = VECTOR('',#208069,1.); +#208069 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208070 = PLANE('',#208071); +#208071 = AXIS2_PLACEMENT_3D('',#208072,#208073,#208074); +#208072 = CARTESIAN_POINT('',(126.983147,-67.344443,0.)); +#208073 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#208074 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208075 = ADVANCED_FACE('',(#208076),#208101,.F.); +#208076 = FACE_BOUND('',#208077,.F.); +#208077 = EDGE_LOOP('',(#208078,#208079,#208087,#208095)); +#208078 = ORIENTED_EDGE('',*,*,#208057,.T.); +#208079 = ORIENTED_EDGE('',*,*,#208080,.T.); +#208080 = EDGE_CURVE('',#208050,#208081,#208083,.T.); +#208081 = VERTEX_POINT('',#208082); +#208082 = CARTESIAN_POINT('',(127.,-74.258578,-3.5E-02)); +#208083 = LINE('',#208084,#208085); +#208084 = CARTESIAN_POINT('',(126.998079,-67.380491,-3.5E-02)); +#208085 = VECTOR('',#208086,1.); +#208086 = DIRECTION('',(2.792927633908E-04,-0.999999960998,0.)); +#208087 = ORIENTED_EDGE('',*,*,#208088,.F.); +#208088 = EDGE_CURVE('',#208089,#208081,#208091,.T.); +#208089 = VERTEX_POINT('',#208090); +#208090 = CARTESIAN_POINT('',(127.,-74.258578,0.)); +#208091 = LINE('',#208092,#208093); +#208092 = CARTESIAN_POINT('',(127.,-74.258578,0.)); +#208093 = VECTOR('',#208094,1.); +#208094 = DIRECTION('',(0.,0.,-1.)); +#208095 = ORIENTED_EDGE('',*,*,#208096,.F.); +#208096 = EDGE_CURVE('',#208058,#208089,#208097,.T.); +#208097 = LINE('',#208098,#208099); +#208098 = CARTESIAN_POINT('',(126.998079,-67.380491,0.)); +#208099 = VECTOR('',#208100,1.); +#208100 = DIRECTION('',(2.792927633908E-04,-0.999999960998,0.)); +#208101 = PLANE('',#208102); +#208102 = AXIS2_PLACEMENT_3D('',#208103,#208104,#208105); +#208103 = CARTESIAN_POINT('',(126.998079,-67.380491,0.)); +#208104 = DIRECTION('',(-0.999999960998,-2.792927633908E-04,-0.)); +#208105 = DIRECTION('',(2.792927633908E-04,-0.999999960998,0.)); +#208106 = ADVANCED_FACE('',(#208107),#208132,.F.); +#208107 = FACE_BOUND('',#208108,.F.); +#208108 = EDGE_LOOP('',(#208109,#208110,#208118,#208126)); +#208109 = ORIENTED_EDGE('',*,*,#208088,.T.); +#208110 = ORIENTED_EDGE('',*,*,#208111,.T.); +#208111 = EDGE_CURVE('',#208081,#208112,#208114,.T.); +#208112 = VERTEX_POINT('',#208113); +#208113 = CARTESIAN_POINT('',(127.283147,-74.544443,-3.5E-02)); +#208114 = LINE('',#208115,#208116); +#208115 = CARTESIAN_POINT('',(127.,-74.258578,-3.5E-02)); +#208116 = VECTOR('',#208117,1.); +#208117 = DIRECTION('',(0.703721115443,-0.710476313244,0.)); +#208118 = ORIENTED_EDGE('',*,*,#208119,.F.); +#208119 = EDGE_CURVE('',#208120,#208112,#208122,.T.); +#208120 = VERTEX_POINT('',#208121); +#208121 = CARTESIAN_POINT('',(127.283147,-74.544443,0.)); +#208122 = LINE('',#208123,#208124); +#208123 = CARTESIAN_POINT('',(127.283147,-74.544443,0.)); +#208124 = VECTOR('',#208125,1.); +#208125 = DIRECTION('',(0.,0.,-1.)); +#208126 = ORIENTED_EDGE('',*,*,#208127,.F.); +#208127 = EDGE_CURVE('',#208089,#208120,#208128,.T.); +#208128 = LINE('',#208129,#208130); +#208129 = CARTESIAN_POINT('',(127.,-74.258578,0.)); +#208130 = VECTOR('',#208131,1.); +#208131 = DIRECTION('',(0.703721115443,-0.710476313244,0.)); +#208132 = PLANE('',#208133); +#208133 = AXIS2_PLACEMENT_3D('',#208134,#208135,#208136); +#208134 = CARTESIAN_POINT('',(127.,-74.258578,0.)); +#208135 = DIRECTION('',(-0.710476313244,-0.703721115443,-0.)); +#208136 = DIRECTION('',(0.703721115443,-0.710476313244,0.)); +#208137 = ADVANCED_FACE('',(#208138),#208163,.F.); +#208138 = FACE_BOUND('',#208139,.F.); +#208139 = EDGE_LOOP('',(#208140,#208141,#208149,#208157)); +#208140 = ORIENTED_EDGE('',*,*,#208119,.T.); +#208141 = ORIENTED_EDGE('',*,*,#208142,.T.); +#208142 = EDGE_CURVE('',#208112,#208143,#208145,.T.); +#208143 = VERTEX_POINT('',#208144); +#208144 = CARTESIAN_POINT('',(127.298079,-74.580491,-3.5E-02)); +#208145 = LINE('',#208146,#208147); +#208146 = CARTESIAN_POINT('',(127.283147,-74.544443,-3.5E-02)); +#208147 = VECTOR('',#208148,1.); +#208148 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208149 = ORIENTED_EDGE('',*,*,#208150,.F.); +#208150 = EDGE_CURVE('',#208151,#208143,#208153,.T.); +#208151 = VERTEX_POINT('',#208152); +#208152 = CARTESIAN_POINT('',(127.298079,-74.580491,0.)); +#208153 = LINE('',#208154,#208155); +#208154 = CARTESIAN_POINT('',(127.298079,-74.580491,0.)); +#208155 = VECTOR('',#208156,1.); +#208156 = DIRECTION('',(0.,0.,-1.)); +#208157 = ORIENTED_EDGE('',*,*,#208158,.F.); +#208158 = EDGE_CURVE('',#208120,#208151,#208159,.T.); +#208159 = LINE('',#208160,#208161); +#208160 = CARTESIAN_POINT('',(127.283147,-74.544443,0.)); +#208161 = VECTOR('',#208162,1.); +#208162 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208163 = PLANE('',#208164); +#208164 = AXIS2_PLACEMENT_3D('',#208165,#208166,#208167); +#208165 = CARTESIAN_POINT('',(127.283147,-74.544443,0.)); +#208166 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#208167 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#208168 = ADVANCED_FACE('',(#208169),#208194,.F.); +#208169 = FACE_BOUND('',#208170,.F.); +#208170 = EDGE_LOOP('',(#208171,#208172,#208180,#208188)); +#208171 = ORIENTED_EDGE('',*,*,#208150,.T.); +#208172 = ORIENTED_EDGE('',*,*,#208173,.T.); +#208173 = EDGE_CURVE('',#208143,#208174,#208176,.T.); +#208174 = VERTEX_POINT('',#208175); +#208175 = CARTESIAN_POINT('',(127.298079,-75.753823,-3.5E-02)); +#208176 = LINE('',#208177,#208178); +#208177 = CARTESIAN_POINT('',(127.298079,-74.580491,-3.5E-02)); +#208178 = VECTOR('',#208179,1.); +#208179 = DIRECTION('',(0.,-1.,0.)); +#208180 = ORIENTED_EDGE('',*,*,#208181,.F.); +#208181 = EDGE_CURVE('',#208182,#208174,#208184,.T.); +#208182 = VERTEX_POINT('',#208183); +#208183 = CARTESIAN_POINT('',(127.298079,-75.753823,0.)); +#208184 = LINE('',#208185,#208186); +#208185 = CARTESIAN_POINT('',(127.298079,-75.753823,0.)); +#208186 = VECTOR('',#208187,1.); +#208187 = DIRECTION('',(0.,0.,-1.)); +#208188 = ORIENTED_EDGE('',*,*,#208189,.F.); +#208189 = EDGE_CURVE('',#208151,#208182,#208190,.T.); +#208190 = LINE('',#208191,#208192); +#208191 = CARTESIAN_POINT('',(127.298079,-74.580491,0.)); +#208192 = VECTOR('',#208193,1.); +#208193 = DIRECTION('',(0.,-1.,0.)); +#208194 = PLANE('',#208195); +#208195 = AXIS2_PLACEMENT_3D('',#208196,#208197,#208198); +#208196 = CARTESIAN_POINT('',(127.298079,-74.580491,0.)); +#208197 = DIRECTION('',(-1.,-0.,-0.)); +#208198 = DIRECTION('',(0.,-1.,0.)); +#208199 = ADVANCED_FACE('',(#208200),#208225,.F.); +#208200 = FACE_BOUND('',#208201,.F.); +#208201 = EDGE_LOOP('',(#208202,#208203,#208211,#208219)); +#208202 = ORIENTED_EDGE('',*,*,#208181,.T.); +#208203 = ORIENTED_EDGE('',*,*,#208204,.T.); +#208204 = EDGE_CURVE('',#208174,#208205,#208207,.T.); +#208205 = VERTEX_POINT('',#208206); +#208206 = CARTESIAN_POINT('',(127.283148,-75.789871,-3.5E-02)); +#208207 = LINE('',#208208,#208209); +#208208 = CARTESIAN_POINT('',(127.298079,-75.753823,-3.5E-02)); +#208209 = VECTOR('',#208210,1.); +#208210 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#208211 = ORIENTED_EDGE('',*,*,#208212,.F.); +#208212 = EDGE_CURVE('',#208213,#208205,#208215,.T.); +#208213 = VERTEX_POINT('',#208214); +#208214 = CARTESIAN_POINT('',(127.283148,-75.789871,0.)); +#208215 = LINE('',#208216,#208217); +#208216 = CARTESIAN_POINT('',(127.283148,-75.789871,0.)); +#208217 = VECTOR('',#208218,1.); +#208218 = DIRECTION('',(0.,0.,-1.)); +#208219 = ORIENTED_EDGE('',*,*,#208220,.F.); +#208220 = EDGE_CURVE('',#208182,#208213,#208221,.T.); +#208221 = LINE('',#208222,#208223); +#208222 = CARTESIAN_POINT('',(127.298079,-75.753823,0.)); +#208223 = VECTOR('',#208224,1.); +#208224 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#208225 = PLANE('',#208226); +#208226 = AXIS2_PLACEMENT_3D('',#208227,#208228,#208229); +#208227 = CARTESIAN_POINT('',(127.298079,-75.753823,0.)); +#208228 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#208229 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#208230 = ADVANCED_FACE('',(#208231),#208256,.F.); +#208231 = FACE_BOUND('',#208232,.F.); +#208232 = EDGE_LOOP('',(#208233,#208234,#208242,#208250)); +#208233 = ORIENTED_EDGE('',*,*,#208212,.T.); +#208234 = ORIENTED_EDGE('',*,*,#208235,.T.); +#208235 = EDGE_CURVE('',#208205,#208236,#208238,.T.); +#208236 = VERTEX_POINT('',#208237); +#208237 = CARTESIAN_POINT('',(127.058949,-76.016786,-3.5E-02)); +#208238 = LINE('',#208239,#208240); +#208239 = CARTESIAN_POINT('',(127.283148,-75.789871,-3.5E-02)); +#208240 = VECTOR('',#208241,1.); +#208241 = DIRECTION('',(-0.702836799784,-0.71135113191,0.)); +#208242 = ORIENTED_EDGE('',*,*,#208243,.F.); +#208243 = EDGE_CURVE('',#208244,#208236,#208246,.T.); +#208244 = VERTEX_POINT('',#208245); +#208245 = CARTESIAN_POINT('',(127.058949,-76.016786,0.)); +#208246 = LINE('',#208247,#208248); +#208247 = CARTESIAN_POINT('',(127.058949,-76.016786,0.)); +#208248 = VECTOR('',#208249,1.); +#208249 = DIRECTION('',(0.,0.,-1.)); +#208250 = ORIENTED_EDGE('',*,*,#208251,.F.); +#208251 = EDGE_CURVE('',#208213,#208244,#208252,.T.); +#208252 = LINE('',#208253,#208254); +#208253 = CARTESIAN_POINT('',(127.283148,-75.789871,0.)); +#208254 = VECTOR('',#208255,1.); +#208255 = DIRECTION('',(-0.702836799784,-0.71135113191,0.)); +#208256 = PLANE('',#208257); +#208257 = AXIS2_PLACEMENT_3D('',#208258,#208259,#208260); +#208258 = CARTESIAN_POINT('',(127.283148,-75.789871,0.)); +#208259 = DIRECTION('',(-0.71135113191,0.702836799784,0.)); +#208260 = DIRECTION('',(-0.702836799784,-0.71135113191,0.)); +#208261 = ADVANCED_FACE('',(#208262),#208287,.F.); +#208262 = FACE_BOUND('',#208263,.F.); +#208263 = EDGE_LOOP('',(#208264,#208265,#208273,#208281)); +#208264 = ORIENTED_EDGE('',*,*,#208243,.T.); +#208265 = ORIENTED_EDGE('',*,*,#208266,.T.); +#208266 = EDGE_CURVE('',#208236,#208267,#208269,.T.); +#208267 = VERTEX_POINT('',#208268); +#208268 = CARTESIAN_POINT('',(127.057028,-76.66056,-3.5E-02)); +#208269 = LINE('',#208270,#208271); +#208270 = CARTESIAN_POINT('',(127.058949,-76.016786,-3.5E-02)); +#208271 = VECTOR('',#208272,1.); +#208272 = DIRECTION('',(-2.98395313838E-03,-0.999995548002,0.)); +#208273 = ORIENTED_EDGE('',*,*,#208274,.F.); +#208274 = EDGE_CURVE('',#208275,#208267,#208277,.T.); +#208275 = VERTEX_POINT('',#208276); +#208276 = CARTESIAN_POINT('',(127.057028,-76.66056,0.)); +#208277 = LINE('',#208278,#208279); +#208278 = CARTESIAN_POINT('',(127.057028,-76.66056,0.)); +#208279 = VECTOR('',#208280,1.); +#208280 = DIRECTION('',(0.,0.,-1.)); +#208281 = ORIENTED_EDGE('',*,*,#208282,.F.); +#208282 = EDGE_CURVE('',#208244,#208275,#208283,.T.); +#208283 = LINE('',#208284,#208285); +#208284 = CARTESIAN_POINT('',(127.058949,-76.016786,0.)); +#208285 = VECTOR('',#208286,1.); +#208286 = DIRECTION('',(-2.98395313838E-03,-0.999995548002,0.)); +#208287 = PLANE('',#208288); +#208288 = AXIS2_PLACEMENT_3D('',#208289,#208290,#208291); +#208289 = CARTESIAN_POINT('',(127.058949,-76.016786,0.)); +#208290 = DIRECTION('',(-0.999995548002,2.98395313838E-03,0.)); +#208291 = DIRECTION('',(-2.98395313838E-03,-0.999995548002,0.)); +#208292 = ADVANCED_FACE('',(#208293),#208318,.F.); +#208293 = FACE_BOUND('',#208294,.F.); +#208294 = EDGE_LOOP('',(#208295,#208296,#208304,#208312)); +#208295 = ORIENTED_EDGE('',*,*,#208274,.T.); +#208296 = ORIENTED_EDGE('',*,*,#208297,.T.); +#208297 = EDGE_CURVE('',#208267,#208298,#208300,.T.); +#208298 = VERTEX_POINT('',#208299); +#208299 = CARTESIAN_POINT('',(127.042096,-76.696609,-3.5E-02)); +#208300 = LINE('',#208301,#208302); +#208301 = CARTESIAN_POINT('',(127.057028,-76.66056,-3.5E-02)); +#208302 = VECTOR('',#208303,1.); +#208303 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#208304 = ORIENTED_EDGE('',*,*,#208305,.F.); +#208305 = EDGE_CURVE('',#208306,#208298,#208308,.T.); +#208306 = VERTEX_POINT('',#208307); +#208307 = CARTESIAN_POINT('',(127.042096,-76.696609,0.)); +#208308 = LINE('',#208309,#208310); +#208309 = CARTESIAN_POINT('',(127.042096,-76.696609,0.)); +#208310 = VECTOR('',#208311,1.); +#208311 = DIRECTION('',(0.,0.,-1.)); +#208312 = ORIENTED_EDGE('',*,*,#208313,.F.); +#208313 = EDGE_CURVE('',#208275,#208306,#208314,.T.); +#208314 = LINE('',#208315,#208316); +#208315 = CARTESIAN_POINT('',(127.057028,-76.66056,0.)); +#208316 = VECTOR('',#208317,1.); +#208317 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#208318 = PLANE('',#208319); +#208319 = AXIS2_PLACEMENT_3D('',#208320,#208321,#208322); +#208320 = CARTESIAN_POINT('',(127.057028,-76.66056,0.)); +#208321 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#208322 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#208323 = ADVANCED_FACE('',(#208324),#208349,.F.); +#208324 = FACE_BOUND('',#208325,.F.); +#208325 = EDGE_LOOP('',(#208326,#208327,#208335,#208343)); +#208326 = ORIENTED_EDGE('',*,*,#208305,.T.); +#208327 = ORIENTED_EDGE('',*,*,#208328,.T.); +#208328 = EDGE_CURVE('',#208298,#208329,#208331,.T.); +#208329 = VERTEX_POINT('',#208330); +#208330 = CARTESIAN_POINT('',(126.9695,-76.771921,-3.5E-02)); +#208331 = LINE('',#208332,#208333); +#208332 = CARTESIAN_POINT('',(127.042096,-76.696609,-3.5E-02)); +#208333 = VECTOR('',#208334,1.); +#208334 = DIRECTION('',(-0.694005348417,-0.719969844069,0.)); +#208335 = ORIENTED_EDGE('',*,*,#208336,.F.); +#208336 = EDGE_CURVE('',#208337,#208329,#208339,.T.); +#208337 = VERTEX_POINT('',#208338); +#208338 = CARTESIAN_POINT('',(126.9695,-76.771921,0.)); +#208339 = LINE('',#208340,#208341); +#208340 = CARTESIAN_POINT('',(126.9695,-76.771921,0.)); +#208341 = VECTOR('',#208342,1.); +#208342 = DIRECTION('',(0.,0.,-1.)); +#208343 = ORIENTED_EDGE('',*,*,#208344,.F.); +#208344 = EDGE_CURVE('',#208306,#208337,#208345,.T.); +#208345 = LINE('',#208346,#208347); +#208346 = CARTESIAN_POINT('',(127.042096,-76.696609,0.)); +#208347 = VECTOR('',#208348,1.); +#208348 = DIRECTION('',(-0.694005348417,-0.719969844069,0.)); +#208349 = PLANE('',#208350); +#208350 = AXIS2_PLACEMENT_3D('',#208351,#208352,#208353); +#208351 = CARTESIAN_POINT('',(127.042096,-76.696609,0.)); +#208352 = DIRECTION('',(-0.719969844069,0.694005348417,0.)); +#208353 = DIRECTION('',(-0.694005348417,-0.719969844069,0.)); +#208354 = ADVANCED_FACE('',(#208355),#208380,.F.); +#208355 = FACE_BOUND('',#208356,.F.); +#208356 = EDGE_LOOP('',(#208357,#208358,#208366,#208374)); +#208357 = ORIENTED_EDGE('',*,*,#208336,.T.); +#208358 = ORIENTED_EDGE('',*,*,#208359,.T.); +#208359 = EDGE_CURVE('',#208329,#208360,#208362,.T.); +#208360 = VERTEX_POINT('',#208361); +#208361 = CARTESIAN_POINT('',(126.977164,-76.785195,-3.5E-02)); +#208362 = LINE('',#208363,#208364); +#208363 = CARTESIAN_POINT('',(126.9695,-76.771921,-3.5E-02)); +#208364 = VECTOR('',#208365,1.); +#208365 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#208366 = ORIENTED_EDGE('',*,*,#208367,.F.); +#208367 = EDGE_CURVE('',#208368,#208360,#208370,.T.); +#208368 = VERTEX_POINT('',#208369); +#208369 = CARTESIAN_POINT('',(126.977164,-76.785195,0.)); +#208370 = LINE('',#208371,#208372); +#208371 = CARTESIAN_POINT('',(126.977164,-76.785195,0.)); +#208372 = VECTOR('',#208373,1.); +#208373 = DIRECTION('',(0.,0.,-1.)); +#208374 = ORIENTED_EDGE('',*,*,#208375,.F.); +#208375 = EDGE_CURVE('',#208337,#208368,#208376,.T.); +#208376 = LINE('',#208377,#208378); +#208377 = CARTESIAN_POINT('',(126.9695,-76.771921,0.)); +#208378 = VECTOR('',#208379,1.); +#208379 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#208380 = PLANE('',#208381); +#208381 = AXIS2_PLACEMENT_3D('',#208382,#208383,#208384); +#208382 = CARTESIAN_POINT('',(126.9695,-76.771921,0.)); +#208383 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#208384 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#208385 = ADVANCED_FACE('',(#208386),#208413,.T.); +#208386 = FACE_BOUND('',#208387,.F.); +#208387 = EDGE_LOOP('',(#208388,#208389,#208398,#208406)); +#208388 = ORIENTED_EDGE('',*,*,#208367,.T.); +#208389 = ORIENTED_EDGE('',*,*,#208390,.T.); +#208390 = EDGE_CURVE('',#208360,#208391,#208393,.T.); +#208391 = VERTEX_POINT('',#208392); +#208392 = CARTESIAN_POINT('',(126.814805,-76.622836,-3.5E-02)); +#208393 = CIRCLE('',#208394,0.299999934501); +#208394 = AXIS2_PLACEMENT_3D('',#208395,#208396,#208397); +#208395 = CARTESIAN_POINT('',(126.70000014059,-76.8999998594,-3.5E-02)); +#208396 = DIRECTION('',(0.,0.,-1.)); +#208397 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#208398 = ORIENTED_EDGE('',*,*,#208399,.F.); +#208399 = EDGE_CURVE('',#208400,#208391,#208402,.T.); +#208400 = VERTEX_POINT('',#208401); +#208401 = CARTESIAN_POINT('',(126.814805,-76.622836,0.)); +#208402 = LINE('',#208403,#208404); +#208403 = CARTESIAN_POINT('',(126.814805,-76.622836,0.)); +#208404 = VECTOR('',#208405,1.); +#208405 = DIRECTION('',(0.,0.,-1.)); +#208406 = ORIENTED_EDGE('',*,*,#208407,.F.); +#208407 = EDGE_CURVE('',#208368,#208400,#208408,.T.); +#208408 = CIRCLE('',#208409,0.299999934501); +#208409 = AXIS2_PLACEMENT_3D('',#208410,#208411,#208412); +#208410 = CARTESIAN_POINT('',(126.70000014059,-76.8999998594,0.)); +#208411 = DIRECTION('',(0.,0.,-1.)); +#208412 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#208413 = CYLINDRICAL_SURFACE('',#208414,0.299999934501); +#208414 = AXIS2_PLACEMENT_3D('',#208415,#208416,#208417); +#208415 = CARTESIAN_POINT('',(126.70000014059,-76.8999998594,0.)); +#208416 = DIRECTION('',(-0.,-0.,1.)); +#208417 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#208418 = ADVANCED_FACE('',(#208419),#208444,.F.); +#208419 = FACE_BOUND('',#208420,.F.); +#208420 = EDGE_LOOP('',(#208421,#208422,#208430,#208438)); +#208421 = ORIENTED_EDGE('',*,*,#208399,.T.); +#208422 = ORIENTED_EDGE('',*,*,#208423,.T.); +#208423 = EDGE_CURVE('',#208391,#208424,#208426,.T.); +#208424 = VERTEX_POINT('',#208425); +#208425 = CARTESIAN_POINT('',(126.828078,-76.630499,-3.5E-02)); +#208426 = LINE('',#208427,#208428); +#208427 = CARTESIAN_POINT('',(126.814805,-76.622836,-3.5E-02)); +#208428 = VECTOR('',#208429,1.); +#208429 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#208430 = ORIENTED_EDGE('',*,*,#208431,.F.); +#208431 = EDGE_CURVE('',#208432,#208424,#208434,.T.); +#208432 = VERTEX_POINT('',#208433); +#208433 = CARTESIAN_POINT('',(126.828078,-76.630499,0.)); +#208434 = LINE('',#208435,#208436); +#208435 = CARTESIAN_POINT('',(126.828078,-76.630499,0.)); +#208436 = VECTOR('',#208437,1.); +#208437 = DIRECTION('',(0.,0.,-1.)); +#208438 = ORIENTED_EDGE('',*,*,#208439,.F.); +#208439 = EDGE_CURVE('',#208400,#208432,#208440,.T.); +#208440 = LINE('',#208441,#208442); +#208441 = CARTESIAN_POINT('',(126.814805,-76.622836,0.)); +#208442 = VECTOR('',#208443,1.); +#208443 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#208444 = PLANE('',#208445); +#208445 = AXIS2_PLACEMENT_3D('',#208446,#208447,#208448); +#208446 = CARTESIAN_POINT('',(126.814805,-76.622836,0.)); +#208447 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#208448 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#208449 = ADVANCED_FACE('',(#208450),#208475,.F.); +#208450 = FACE_BOUND('',#208451,.F.); +#208451 = EDGE_LOOP('',(#208452,#208453,#208461,#208469)); +#208452 = ORIENTED_EDGE('',*,*,#208431,.T.); +#208453 = ORIENTED_EDGE('',*,*,#208454,.T.); +#208454 = EDGE_CURVE('',#208424,#208455,#208457,.T.); +#208455 = VERTEX_POINT('',#208456); +#208456 = CARTESIAN_POINT('',(126.858949,-76.599629,-3.5E-02)); +#208457 = LINE('',#208458,#208459); +#208458 = CARTESIAN_POINT('',(126.828078,-76.630499,-3.5E-02)); +#208459 = VECTOR('',#208460,1.); +#208460 = DIRECTION('',(0.707118233885,0.707095328303,0.)); +#208461 = ORIENTED_EDGE('',*,*,#208462,.F.); +#208462 = EDGE_CURVE('',#208463,#208455,#208465,.T.); +#208463 = VERTEX_POINT('',#208464); +#208464 = CARTESIAN_POINT('',(126.858949,-76.599629,0.)); +#208465 = LINE('',#208466,#208467); +#208466 = CARTESIAN_POINT('',(126.858949,-76.599629,0.)); +#208467 = VECTOR('',#208468,1.); +#208468 = DIRECTION('',(0.,0.,-1.)); +#208469 = ORIENTED_EDGE('',*,*,#208470,.F.); +#208470 = EDGE_CURVE('',#208432,#208463,#208471,.T.); +#208471 = LINE('',#208472,#208473); +#208472 = CARTESIAN_POINT('',(126.828078,-76.630499,0.)); +#208473 = VECTOR('',#208474,1.); +#208474 = DIRECTION('',(0.707118233885,0.707095328303,0.)); +#208475 = PLANE('',#208476); +#208476 = AXIS2_PLACEMENT_3D('',#208477,#208478,#208479); +#208477 = CARTESIAN_POINT('',(126.828078,-76.630499,0.)); +#208478 = DIRECTION('',(0.707095328303,-0.707118233885,0.)); +#208479 = DIRECTION('',(0.707118233885,0.707095328303,0.)); +#208480 = ADVANCED_FACE('',(#208481),#208506,.F.); +#208481 = FACE_BOUND('',#208482,.F.); +#208482 = EDGE_LOOP('',(#208483,#208484,#208492,#208500)); +#208483 = ORIENTED_EDGE('',*,*,#208462,.T.); +#208484 = ORIENTED_EDGE('',*,*,#208485,.T.); +#208485 = EDGE_CURVE('',#208455,#208486,#208488,.T.); +#208486 = VERTEX_POINT('',#208487); +#208487 = CARTESIAN_POINT('',(126.86087,-75.955856,-3.5E-02)); +#208488 = LINE('',#208489,#208490); +#208489 = CARTESIAN_POINT('',(126.858949,-76.599629,-3.5E-02)); +#208490 = VECTOR('',#208491,1.); +#208491 = DIRECTION('',(2.983957773462E-03,0.999995547988,0.)); +#208492 = ORIENTED_EDGE('',*,*,#208493,.F.); +#208493 = EDGE_CURVE('',#208494,#208486,#208496,.T.); +#208494 = VERTEX_POINT('',#208495); +#208495 = CARTESIAN_POINT('',(126.86087,-75.955856,0.)); +#208496 = LINE('',#208497,#208498); +#208497 = CARTESIAN_POINT('',(126.86087,-75.955856,0.)); +#208498 = VECTOR('',#208499,1.); +#208499 = DIRECTION('',(0.,0.,-1.)); +#208500 = ORIENTED_EDGE('',*,*,#208501,.F.); +#208501 = EDGE_CURVE('',#208463,#208494,#208502,.T.); +#208502 = LINE('',#208503,#208504); +#208503 = CARTESIAN_POINT('',(126.858949,-76.599629,0.)); +#208504 = VECTOR('',#208505,1.); +#208505 = DIRECTION('',(2.983957773462E-03,0.999995547988,0.)); +#208506 = PLANE('',#208507); +#208507 = AXIS2_PLACEMENT_3D('',#208508,#208509,#208510); +#208508 = CARTESIAN_POINT('',(126.858949,-76.599629,0.)); +#208509 = DIRECTION('',(0.999995547988,-2.983957773462E-03,0.)); +#208510 = DIRECTION('',(2.983957773462E-03,0.999995547988,0.)); +#208511 = ADVANCED_FACE('',(#208512),#208537,.F.); +#208512 = FACE_BOUND('',#208513,.F.); +#208513 = EDGE_LOOP('',(#208514,#208515,#208523,#208531)); +#208514 = ORIENTED_EDGE('',*,*,#208493,.T.); +#208515 = ORIENTED_EDGE('',*,*,#208516,.T.); +#208516 = EDGE_CURVE('',#208486,#208517,#208519,.T.); +#208517 = VERTEX_POINT('',#208518); +#208518 = CARTESIAN_POINT('',(126.875802,-75.919808,-3.5E-02)); +#208519 = LINE('',#208520,#208521); +#208520 = CARTESIAN_POINT('',(126.86087,-75.955856,-3.5E-02)); +#208521 = VECTOR('',#208522,1.); +#208522 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#208523 = ORIENTED_EDGE('',*,*,#208524,.F.); +#208524 = EDGE_CURVE('',#208525,#208517,#208527,.T.); +#208525 = VERTEX_POINT('',#208526); +#208526 = CARTESIAN_POINT('',(126.875802,-75.919808,0.)); +#208527 = LINE('',#208528,#208529); +#208528 = CARTESIAN_POINT('',(126.875802,-75.919808,0.)); +#208529 = VECTOR('',#208530,1.); +#208530 = DIRECTION('',(0.,0.,-1.)); +#208531 = ORIENTED_EDGE('',*,*,#208532,.F.); +#208532 = EDGE_CURVE('',#208494,#208525,#208533,.T.); +#208533 = LINE('',#208534,#208535); +#208534 = CARTESIAN_POINT('',(126.86087,-75.955856,0.)); +#208535 = VECTOR('',#208536,1.); +#208536 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#208537 = PLANE('',#208538); +#208538 = AXIS2_PLACEMENT_3D('',#208539,#208540,#208541); +#208539 = CARTESIAN_POINT('',(126.86087,-75.955856,0.)); +#208540 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#208541 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#208542 = ADVANCED_FACE('',(#208543),#208568,.F.); +#208543 = FACE_BOUND('',#208544,.F.); +#208544 = EDGE_LOOP('',(#208545,#208546,#208554,#208562)); +#208545 = ORIENTED_EDGE('',*,*,#208524,.T.); +#208546 = ORIENTED_EDGE('',*,*,#208547,.T.); +#208547 = EDGE_CURVE('',#208517,#208548,#208550,.T.); +#208548 = VERTEX_POINT('',#208549); +#208549 = CARTESIAN_POINT('',(127.1,-75.692892,-3.5E-02)); +#208550 = LINE('',#208551,#208552); +#208551 = CARTESIAN_POINT('',(126.875802,-75.919808,-3.5E-02)); +#208552 = VECTOR('',#208553,1.); +#208553 = DIRECTION('',(0.702833646138,0.711354247795,0.)); +#208554 = ORIENTED_EDGE('',*,*,#208555,.F.); +#208555 = EDGE_CURVE('',#208556,#208548,#208558,.T.); +#208556 = VERTEX_POINT('',#208557); +#208557 = CARTESIAN_POINT('',(127.1,-75.692892,0.)); +#208558 = LINE('',#208559,#208560); +#208559 = CARTESIAN_POINT('',(127.1,-75.692892,0.)); +#208560 = VECTOR('',#208561,1.); +#208561 = DIRECTION('',(0.,0.,-1.)); +#208562 = ORIENTED_EDGE('',*,*,#208563,.F.); +#208563 = EDGE_CURVE('',#208525,#208556,#208564,.T.); +#208564 = LINE('',#208565,#208566); +#208565 = CARTESIAN_POINT('',(126.875802,-75.919808,0.)); +#208566 = VECTOR('',#208567,1.); +#208567 = DIRECTION('',(0.702833646138,0.711354247795,0.)); +#208568 = PLANE('',#208569); +#208569 = AXIS2_PLACEMENT_3D('',#208570,#208571,#208572); +#208570 = CARTESIAN_POINT('',(126.875802,-75.919808,0.)); +#208571 = DIRECTION('',(0.711354247795,-0.702833646138,0.)); +#208572 = DIRECTION('',(0.702833646138,0.711354247795,0.)); +#208573 = ADVANCED_FACE('',(#208574),#208599,.F.); +#208574 = FACE_BOUND('',#208575,.F.); +#208575 = EDGE_LOOP('',(#208576,#208577,#208585,#208593)); +#208576 = ORIENTED_EDGE('',*,*,#208555,.T.); +#208577 = ORIENTED_EDGE('',*,*,#208578,.T.); +#208578 = EDGE_CURVE('',#208548,#208579,#208581,.T.); +#208579 = VERTEX_POINT('',#208580); +#208580 = CARTESIAN_POINT('',(127.1,-74.641422,-3.5E-02)); +#208581 = LINE('',#208582,#208583); +#208582 = CARTESIAN_POINT('',(127.1,-75.692892,-3.5E-02)); +#208583 = VECTOR('',#208584,1.); +#208584 = DIRECTION('',(0.,1.,0.)); +#208585 = ORIENTED_EDGE('',*,*,#208586,.F.); +#208586 = EDGE_CURVE('',#208587,#208579,#208589,.T.); +#208587 = VERTEX_POINT('',#208588); +#208588 = CARTESIAN_POINT('',(127.1,-74.641422,0.)); +#208589 = LINE('',#208590,#208591); +#208590 = CARTESIAN_POINT('',(127.1,-74.641422,0.)); +#208591 = VECTOR('',#208592,1.); +#208592 = DIRECTION('',(0.,0.,-1.)); +#208593 = ORIENTED_EDGE('',*,*,#208594,.F.); +#208594 = EDGE_CURVE('',#208556,#208587,#208595,.T.); +#208595 = LINE('',#208596,#208597); +#208596 = CARTESIAN_POINT('',(127.1,-75.692892,0.)); +#208597 = VECTOR('',#208598,1.); +#208598 = DIRECTION('',(0.,1.,0.)); +#208599 = PLANE('',#208600); +#208600 = AXIS2_PLACEMENT_3D('',#208601,#208602,#208603); +#208601 = CARTESIAN_POINT('',(127.1,-75.692892,0.)); +#208602 = DIRECTION('',(1.,-0.,0.)); +#208603 = DIRECTION('',(0.,1.,0.)); +#208604 = ADVANCED_FACE('',(#208605),#208630,.F.); +#208605 = FACE_BOUND('',#208606,.F.); +#208606 = EDGE_LOOP('',(#208607,#208608,#208616,#208624)); +#208607 = ORIENTED_EDGE('',*,*,#208586,.T.); +#208608 = ORIENTED_EDGE('',*,*,#208609,.T.); +#208609 = EDGE_CURVE('',#208579,#208610,#208612,.T.); +#208610 = VERTEX_POINT('',#208611); +#208611 = CARTESIAN_POINT('',(126.816853,-74.355557,-3.5E-02)); +#208612 = LINE('',#208613,#208614); +#208613 = CARTESIAN_POINT('',(127.1,-74.641422,-3.5E-02)); +#208614 = VECTOR('',#208615,1.); +#208615 = DIRECTION('',(-0.703721115443,0.710476313244,0.)); +#208616 = ORIENTED_EDGE('',*,*,#208617,.F.); +#208617 = EDGE_CURVE('',#208618,#208610,#208620,.T.); +#208618 = VERTEX_POINT('',#208619); +#208619 = CARTESIAN_POINT('',(126.816853,-74.355557,0.)); +#208620 = LINE('',#208621,#208622); +#208621 = CARTESIAN_POINT('',(126.816853,-74.355557,0.)); +#208622 = VECTOR('',#208623,1.); +#208623 = DIRECTION('',(0.,0.,-1.)); +#208624 = ORIENTED_EDGE('',*,*,#208625,.F.); +#208625 = EDGE_CURVE('',#208587,#208618,#208626,.T.); +#208626 = LINE('',#208627,#208628); +#208627 = CARTESIAN_POINT('',(127.1,-74.641422,0.)); +#208628 = VECTOR('',#208629,1.); +#208629 = DIRECTION('',(-0.703721115443,0.710476313244,0.)); +#208630 = PLANE('',#208631); +#208631 = AXIS2_PLACEMENT_3D('',#208632,#208633,#208634); +#208632 = CARTESIAN_POINT('',(127.1,-74.641422,0.)); +#208633 = DIRECTION('',(0.710476313244,0.703721115443,0.)); +#208634 = DIRECTION('',(-0.703721115443,0.710476313244,0.)); +#208635 = ADVANCED_FACE('',(#208636),#208661,.F.); +#208636 = FACE_BOUND('',#208637,.F.); +#208637 = EDGE_LOOP('',(#208638,#208639,#208647,#208655)); +#208638 = ORIENTED_EDGE('',*,*,#208617,.T.); +#208639 = ORIENTED_EDGE('',*,*,#208640,.T.); +#208640 = EDGE_CURVE('',#208610,#208641,#208643,.T.); +#208641 = VERTEX_POINT('',#208642); +#208642 = CARTESIAN_POINT('',(126.801921,-74.319509,-3.5E-02)); +#208643 = LINE('',#208644,#208645); +#208644 = CARTESIAN_POINT('',(126.816853,-74.355557,-3.5E-02)); +#208645 = VECTOR('',#208646,1.); +#208646 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#208647 = ORIENTED_EDGE('',*,*,#208648,.F.); +#208648 = EDGE_CURVE('',#208649,#208641,#208651,.T.); +#208649 = VERTEX_POINT('',#208650); +#208650 = CARTESIAN_POINT('',(126.801921,-74.319509,0.)); +#208651 = LINE('',#208652,#208653); +#208652 = CARTESIAN_POINT('',(126.801921,-74.319509,0.)); +#208653 = VECTOR('',#208654,1.); +#208654 = DIRECTION('',(0.,0.,-1.)); +#208655 = ORIENTED_EDGE('',*,*,#208656,.F.); +#208656 = EDGE_CURVE('',#208618,#208649,#208657,.T.); +#208657 = LINE('',#208658,#208659); +#208658 = CARTESIAN_POINT('',(126.816853,-74.355557,0.)); +#208659 = VECTOR('',#208660,1.); +#208660 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#208661 = PLANE('',#208662); +#208662 = AXIS2_PLACEMENT_3D('',#208663,#208664,#208665); +#208663 = CARTESIAN_POINT('',(126.816853,-74.355557,0.)); +#208664 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#208665 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#208666 = ADVANCED_FACE('',(#208667),#208692,.F.); +#208667 = FACE_BOUND('',#208668,.F.); +#208668 = EDGE_LOOP('',(#208669,#208670,#208678,#208686)); +#208669 = ORIENTED_EDGE('',*,*,#208648,.T.); +#208670 = ORIENTED_EDGE('',*,*,#208671,.T.); +#208671 = EDGE_CURVE('',#208641,#208672,#208674,.T.); +#208672 = VERTEX_POINT('',#208673); +#208673 = CARTESIAN_POINT('',(126.8,-67.441422,-3.5E-02)); +#208674 = LINE('',#208675,#208676); +#208675 = CARTESIAN_POINT('',(126.801921,-74.319509,-3.5E-02)); +#208676 = VECTOR('',#208677,1.); +#208677 = DIRECTION('',(-2.792927633908E-04,0.999999960998,0.)); +#208678 = ORIENTED_EDGE('',*,*,#208679,.F.); +#208679 = EDGE_CURVE('',#208680,#208672,#208682,.T.); +#208680 = VERTEX_POINT('',#208681); +#208681 = CARTESIAN_POINT('',(126.8,-67.441422,0.)); +#208682 = LINE('',#208683,#208684); +#208683 = CARTESIAN_POINT('',(126.8,-67.441422,0.)); +#208684 = VECTOR('',#208685,1.); +#208685 = DIRECTION('',(0.,0.,-1.)); +#208686 = ORIENTED_EDGE('',*,*,#208687,.F.); +#208687 = EDGE_CURVE('',#208649,#208680,#208688,.T.); +#208688 = LINE('',#208689,#208690); +#208689 = CARTESIAN_POINT('',(126.801921,-74.319509,0.)); +#208690 = VECTOR('',#208691,1.); +#208691 = DIRECTION('',(-2.792927633908E-04,0.999999960998,0.)); +#208692 = PLANE('',#208693); +#208693 = AXIS2_PLACEMENT_3D('',#208694,#208695,#208696); +#208694 = CARTESIAN_POINT('',(126.801921,-74.319509,0.)); +#208695 = DIRECTION('',(0.999999960998,2.792927633908E-04,0.)); +#208696 = DIRECTION('',(-2.792927633908E-04,0.999999960998,0.)); +#208697 = ADVANCED_FACE('',(#208698),#208723,.F.); +#208698 = FACE_BOUND('',#208699,.F.); +#208699 = EDGE_LOOP('',(#208700,#208701,#208709,#208717)); +#208700 = ORIENTED_EDGE('',*,*,#208679,.T.); +#208701 = ORIENTED_EDGE('',*,*,#208702,.T.); +#208702 = EDGE_CURVE('',#208672,#208703,#208705,.T.); +#208703 = VERTEX_POINT('',#208704); +#208704 = CARTESIAN_POINT('',(124.658578,-65.3,-3.5E-02)); +#208705 = LINE('',#208706,#208707); +#208706 = CARTESIAN_POINT('',(126.8,-67.441422,-3.5E-02)); +#208707 = VECTOR('',#208708,1.); +#208708 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208709 = ORIENTED_EDGE('',*,*,#208710,.F.); +#208710 = EDGE_CURVE('',#208711,#208703,#208713,.T.); +#208711 = VERTEX_POINT('',#208712); +#208712 = CARTESIAN_POINT('',(124.658578,-65.3,0.)); +#208713 = LINE('',#208714,#208715); +#208714 = CARTESIAN_POINT('',(124.658578,-65.3,0.)); +#208715 = VECTOR('',#208716,1.); +#208716 = DIRECTION('',(0.,0.,-1.)); +#208717 = ORIENTED_EDGE('',*,*,#208718,.F.); +#208718 = EDGE_CURVE('',#208680,#208711,#208719,.T.); +#208719 = LINE('',#208720,#208721); +#208720 = CARTESIAN_POINT('',(126.8,-67.441422,0.)); +#208721 = VECTOR('',#208722,1.); +#208722 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208723 = PLANE('',#208724); +#208724 = AXIS2_PLACEMENT_3D('',#208725,#208726,#208727); +#208725 = CARTESIAN_POINT('',(126.8,-67.441422,0.)); +#208726 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#208727 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#208728 = ADVANCED_FACE('',(#208729),#208754,.F.); +#208729 = FACE_BOUND('',#208730,.F.); +#208730 = EDGE_LOOP('',(#208731,#208732,#208740,#208748)); +#208731 = ORIENTED_EDGE('',*,*,#208710,.T.); +#208732 = ORIENTED_EDGE('',*,*,#208733,.T.); +#208733 = EDGE_CURVE('',#208703,#208734,#208736,.T.); +#208734 = VERTEX_POINT('',#208735); +#208735 = CARTESIAN_POINT('',(122.780491,-65.298079,-3.5E-02)); +#208736 = LINE('',#208737,#208738); +#208737 = CARTESIAN_POINT('',(124.658578,-65.3,-3.5E-02)); +#208738 = VECTOR('',#208739,1.); +#208739 = DIRECTION('',(-0.99999947689,1.022848779158E-03,0.)); +#208740 = ORIENTED_EDGE('',*,*,#208741,.F.); +#208741 = EDGE_CURVE('',#208742,#208734,#208744,.T.); +#208742 = VERTEX_POINT('',#208743); +#208743 = CARTESIAN_POINT('',(122.780491,-65.298079,0.)); +#208744 = LINE('',#208745,#208746); +#208745 = CARTESIAN_POINT('',(122.780491,-65.298079,0.)); +#208746 = VECTOR('',#208747,1.); +#208747 = DIRECTION('',(0.,0.,-1.)); +#208748 = ORIENTED_EDGE('',*,*,#208749,.F.); +#208749 = EDGE_CURVE('',#208711,#208742,#208750,.T.); +#208750 = LINE('',#208751,#208752); +#208751 = CARTESIAN_POINT('',(124.658578,-65.3,0.)); +#208752 = VECTOR('',#208753,1.); +#208753 = DIRECTION('',(-0.99999947689,1.022848779158E-03,0.)); +#208754 = PLANE('',#208755); +#208755 = AXIS2_PLACEMENT_3D('',#208756,#208757,#208758); +#208756 = CARTESIAN_POINT('',(124.658578,-65.3,0.)); +#208757 = DIRECTION('',(1.022848779158E-03,0.99999947689,0.)); +#208758 = DIRECTION('',(-0.99999947689,1.022848779158E-03,0.)); +#208759 = ADVANCED_FACE('',(#208760),#208785,.F.); +#208760 = FACE_BOUND('',#208761,.F.); +#208761 = EDGE_LOOP('',(#208762,#208763,#208771,#208779)); +#208762 = ORIENTED_EDGE('',*,*,#208741,.T.); +#208763 = ORIENTED_EDGE('',*,*,#208764,.T.); +#208764 = EDGE_CURVE('',#208734,#208765,#208767,.T.); +#208765 = VERTEX_POINT('',#208766); +#208766 = CARTESIAN_POINT('',(122.744443,-65.283147,-3.5E-02)); +#208767 = LINE('',#208768,#208769); +#208768 = CARTESIAN_POINT('',(122.780491,-65.298079,-3.5E-02)); +#208769 = VECTOR('',#208770,1.); +#208770 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#208771 = ORIENTED_EDGE('',*,*,#208772,.F.); +#208772 = EDGE_CURVE('',#208773,#208765,#208775,.T.); +#208773 = VERTEX_POINT('',#208774); +#208774 = CARTESIAN_POINT('',(122.744443,-65.283147,0.)); +#208775 = LINE('',#208776,#208777); +#208776 = CARTESIAN_POINT('',(122.744443,-65.283147,0.)); +#208777 = VECTOR('',#208778,1.); +#208778 = DIRECTION('',(0.,0.,-1.)); +#208779 = ORIENTED_EDGE('',*,*,#208780,.F.); +#208780 = EDGE_CURVE('',#208742,#208773,#208781,.T.); +#208781 = LINE('',#208782,#208783); +#208782 = CARTESIAN_POINT('',(122.780491,-65.298079,0.)); +#208783 = VECTOR('',#208784,1.); +#208784 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#208785 = PLANE('',#208786); +#208786 = AXIS2_PLACEMENT_3D('',#208787,#208788,#208789); +#208787 = CARTESIAN_POINT('',(122.780491,-65.298079,0.)); +#208788 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#208789 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#208790 = ADVANCED_FACE('',(#208791),#208816,.F.); +#208791 = FACE_BOUND('',#208792,.F.); +#208792 = EDGE_LOOP('',(#208793,#208794,#208802,#208810)); +#208793 = ORIENTED_EDGE('',*,*,#208772,.T.); +#208794 = ORIENTED_EDGE('',*,*,#208795,.T.); +#208795 = EDGE_CURVE('',#208765,#208796,#208798,.T.); +#208796 = VERTEX_POINT('',#208797); +#208797 = CARTESIAN_POINT('',(121.828078,-64.3695,-3.5E-02)); +#208798 = LINE('',#208799,#208800); +#208799 = CARTESIAN_POINT('',(122.744443,-65.283147,-3.5E-02)); +#208800 = VECTOR('',#208801,1.); +#208801 = DIRECTION('',(-0.708156220679,0.706055781871,0.)); +#208802 = ORIENTED_EDGE('',*,*,#208803,.F.); +#208803 = EDGE_CURVE('',#208804,#208796,#208806,.T.); +#208804 = VERTEX_POINT('',#208805); +#208805 = CARTESIAN_POINT('',(121.828078,-64.3695,0.)); +#208806 = LINE('',#208807,#208808); +#208807 = CARTESIAN_POINT('',(121.828078,-64.3695,0.)); +#208808 = VECTOR('',#208809,1.); +#208809 = DIRECTION('',(0.,0.,-1.)); +#208810 = ORIENTED_EDGE('',*,*,#208811,.F.); +#208811 = EDGE_CURVE('',#208773,#208804,#208812,.T.); +#208812 = LINE('',#208813,#208814); +#208813 = CARTESIAN_POINT('',(122.744443,-65.283147,0.)); +#208814 = VECTOR('',#208815,1.); +#208815 = DIRECTION('',(-0.708156220679,0.706055781871,0.)); +#208816 = PLANE('',#208817); +#208817 = AXIS2_PLACEMENT_3D('',#208818,#208819,#208820); +#208818 = CARTESIAN_POINT('',(122.744443,-65.283147,0.)); +#208819 = DIRECTION('',(0.706055781871,0.708156220679,0.)); +#208820 = DIRECTION('',(-0.708156220679,0.706055781871,0.)); +#208821 = ADVANCED_FACE('',(#208822),#208847,.F.); +#208822 = FACE_BOUND('',#208823,.F.); +#208823 = EDGE_LOOP('',(#208824,#208825,#208833,#208841)); +#208824 = ORIENTED_EDGE('',*,*,#208803,.T.); +#208825 = ORIENTED_EDGE('',*,*,#208826,.T.); +#208826 = EDGE_CURVE('',#208796,#208827,#208829,.T.); +#208827 = VERTEX_POINT('',#208828); +#208828 = CARTESIAN_POINT('',(121.814805,-64.377164,-3.5E-02)); +#208829 = LINE('',#208830,#208831); +#208830 = CARTESIAN_POINT('',(121.828078,-64.3695,-3.5E-02)); +#208831 = VECTOR('',#208832,1.); +#208832 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#208833 = ORIENTED_EDGE('',*,*,#208834,.F.); +#208834 = EDGE_CURVE('',#208835,#208827,#208837,.T.); +#208835 = VERTEX_POINT('',#208836); +#208836 = CARTESIAN_POINT('',(121.814805,-64.377164,0.)); +#208837 = LINE('',#208838,#208839); +#208838 = CARTESIAN_POINT('',(121.814805,-64.377164,0.)); +#208839 = VECTOR('',#208840,1.); +#208840 = DIRECTION('',(0.,0.,-1.)); +#208841 = ORIENTED_EDGE('',*,*,#208842,.F.); +#208842 = EDGE_CURVE('',#208804,#208835,#208843,.T.); +#208843 = LINE('',#208844,#208845); +#208844 = CARTESIAN_POINT('',(121.828078,-64.3695,0.)); +#208845 = VECTOR('',#208846,1.); +#208846 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#208847 = PLANE('',#208848); +#208848 = AXIS2_PLACEMENT_3D('',#208849,#208850,#208851); +#208849 = CARTESIAN_POINT('',(121.828078,-64.3695,0.)); +#208850 = DIRECTION('',(-0.500040608684,0.866001957081,0.)); +#208851 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#208852 = ADVANCED_FACE('',(#208853),#208880,.T.); +#208853 = FACE_BOUND('',#208854,.F.); +#208854 = EDGE_LOOP('',(#208855,#208856,#208865,#208873)); +#208855 = ORIENTED_EDGE('',*,*,#208834,.T.); +#208856 = ORIENTED_EDGE('',*,*,#208857,.T.); +#208857 = EDGE_CURVE('',#208827,#208858,#208860,.T.); +#208858 = VERTEX_POINT('',#208859); +#208859 = CARTESIAN_POINT('',(121.977164,-64.214805,-3.5E-02)); +#208860 = CIRCLE('',#208861,0.300000118202); +#208861 = AXIS2_PLACEMENT_3D('',#208862,#208863,#208864); +#208862 = CARTESIAN_POINT('',(121.7,-64.1,-3.5E-02)); +#208863 = DIRECTION('',(0.,0.,-1.)); +#208864 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#208865 = ORIENTED_EDGE('',*,*,#208866,.F.); +#208866 = EDGE_CURVE('',#208867,#208858,#208869,.T.); +#208867 = VERTEX_POINT('',#208868); +#208868 = CARTESIAN_POINT('',(121.977164,-64.214805,0.)); +#208869 = LINE('',#208870,#208871); +#208870 = CARTESIAN_POINT('',(121.977164,-64.214805,0.)); +#208871 = VECTOR('',#208872,1.); +#208872 = DIRECTION('',(0.,0.,-1.)); +#208873 = ORIENTED_EDGE('',*,*,#208874,.F.); +#208874 = EDGE_CURVE('',#208835,#208867,#208875,.T.); +#208875 = CIRCLE('',#208876,0.300000118202); +#208876 = AXIS2_PLACEMENT_3D('',#208877,#208878,#208879); +#208877 = CARTESIAN_POINT('',(121.7,-64.1,0.)); +#208878 = DIRECTION('',(0.,0.,-1.)); +#208879 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#208880 = CYLINDRICAL_SURFACE('',#208881,0.300000118202); +#208881 = AXIS2_PLACEMENT_3D('',#208882,#208883,#208884); +#208882 = CARTESIAN_POINT('',(121.7,-64.1,0.)); +#208883 = DIRECTION('',(-0.,-0.,1.)); +#208884 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#208885 = ADVANCED_FACE('',(#208886),#208902,.F.); +#208886 = FACE_BOUND('',#208887,.F.); +#208887 = EDGE_LOOP('',(#208888,#208889,#208895,#208896)); +#208888 = ORIENTED_EDGE('',*,*,#208866,.T.); +#208889 = ORIENTED_EDGE('',*,*,#208890,.T.); +#208890 = EDGE_CURVE('',#208858,#207918,#208891,.T.); +#208891 = LINE('',#208892,#208893); +#208892 = CARTESIAN_POINT('',(121.977164,-64.214805,-3.5E-02)); +#208893 = VECTOR('',#208894,1.); +#208894 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#208895 = ORIENTED_EDGE('',*,*,#207915,.F.); +#208896 = ORIENTED_EDGE('',*,*,#208897,.F.); +#208897 = EDGE_CURVE('',#208867,#207916,#208898,.T.); +#208898 = LINE('',#208899,#208900); +#208899 = CARTESIAN_POINT('',(121.977164,-64.214805,0.)); +#208900 = VECTOR('',#208901,1.); +#208901 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#208902 = PLANE('',#208903); +#208903 = AXIS2_PLACEMENT_3D('',#208904,#208905,#208906); +#208904 = CARTESIAN_POINT('',(121.977164,-64.214805,0.)); +#208905 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#208906 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#208907 = ADVANCED_FACE('',(#208908),#208935,.F.); +#208908 = FACE_BOUND('',#208909,.F.); +#208909 = EDGE_LOOP('',(#208910,#208920,#208927,#208928)); +#208910 = ORIENTED_EDGE('',*,*,#208911,.T.); +#208911 = EDGE_CURVE('',#208912,#208914,#208916,.T.); +#208912 = VERTEX_POINT('',#208913); +#208913 = CARTESIAN_POINT('',(126.837255,-76.9,0.)); +#208914 = VERTEX_POINT('',#208915); +#208915 = CARTESIAN_POINT('',(126.837255,-76.9,-3.5E-02)); +#208916 = LINE('',#208917,#208918); +#208917 = CARTESIAN_POINT('',(126.837255,-76.9,0.)); +#208918 = VECTOR('',#208919,1.); +#208919 = DIRECTION('',(0.,0.,-1.)); +#208920 = ORIENTED_EDGE('',*,*,#208921,.T.); +#208921 = EDGE_CURVE('',#208914,#208914,#208922,.T.); +#208922 = CIRCLE('',#208923,0.137255); +#208923 = AXIS2_PLACEMENT_3D('',#208924,#208925,#208926); +#208924 = CARTESIAN_POINT('',(126.7,-76.9,-3.5E-02)); +#208925 = DIRECTION('',(0.,0.,1.)); +#208926 = DIRECTION('',(1.,0.,-0.)); +#208927 = ORIENTED_EDGE('',*,*,#208911,.F.); +#208928 = ORIENTED_EDGE('',*,*,#208929,.F.); +#208929 = EDGE_CURVE('',#208912,#208912,#208930,.T.); +#208930 = CIRCLE('',#208931,0.137255); +#208931 = AXIS2_PLACEMENT_3D('',#208932,#208933,#208934); +#208932 = CARTESIAN_POINT('',(126.7,-76.9,0.)); +#208933 = DIRECTION('',(0.,0.,1.)); +#208934 = DIRECTION('',(1.,0.,-0.)); +#208935 = CYLINDRICAL_SURFACE('',#208936,0.137255); +#208936 = AXIS2_PLACEMENT_3D('',#208937,#208938,#208939); +#208937 = CARTESIAN_POINT('',(126.7,-76.9,0.)); +#208938 = DIRECTION('',(0.,0.,1.)); +#208939 = DIRECTION('',(1.,0.,-0.)); +#208940 = ADVANCED_FACE('',(#208941),#208968,.F.); +#208941 = FACE_BOUND('',#208942,.F.); +#208942 = EDGE_LOOP('',(#208943,#208953,#208960,#208961)); +#208943 = ORIENTED_EDGE('',*,*,#208944,.T.); +#208944 = EDGE_CURVE('',#208945,#208947,#208949,.T.); +#208945 = VERTEX_POINT('',#208946); +#208946 = CARTESIAN_POINT('',(121.837255,-64.1,0.)); +#208947 = VERTEX_POINT('',#208948); +#208948 = CARTESIAN_POINT('',(121.837255,-64.1,-3.5E-02)); +#208949 = LINE('',#208950,#208951); +#208950 = CARTESIAN_POINT('',(121.837255,-64.1,0.)); +#208951 = VECTOR('',#208952,1.); +#208952 = DIRECTION('',(0.,0.,-1.)); +#208953 = ORIENTED_EDGE('',*,*,#208954,.T.); +#208954 = EDGE_CURVE('',#208947,#208947,#208955,.T.); +#208955 = CIRCLE('',#208956,0.137255); +#208956 = AXIS2_PLACEMENT_3D('',#208957,#208958,#208959); +#208957 = CARTESIAN_POINT('',(121.7,-64.1,-3.5E-02)); +#208958 = DIRECTION('',(0.,0.,1.)); +#208959 = DIRECTION('',(1.,0.,-0.)); +#208960 = ORIENTED_EDGE('',*,*,#208944,.F.); +#208961 = ORIENTED_EDGE('',*,*,#208962,.F.); +#208962 = EDGE_CURVE('',#208945,#208945,#208963,.T.); +#208963 = CIRCLE('',#208964,0.137255); +#208964 = AXIS2_PLACEMENT_3D('',#208965,#208966,#208967); +#208965 = CARTESIAN_POINT('',(121.7,-64.1,0.)); +#208966 = DIRECTION('',(0.,0.,1.)); +#208967 = DIRECTION('',(1.,0.,-0.)); +#208968 = CYLINDRICAL_SURFACE('',#208969,0.137255); +#208969 = AXIS2_PLACEMENT_3D('',#208970,#208971,#208972); +#208970 = CARTESIAN_POINT('',(121.7,-64.1,0.)); +#208971 = DIRECTION('',(0.,0.,1.)); +#208972 = DIRECTION('',(1.,0.,-0.)); +#208973 = ADVANCED_FACE('',(#208974,#209008,#209011),#209014,.F.); +#208974 = FACE_BOUND('',#208975,.F.); +#208975 = EDGE_LOOP('',(#208976,#208977,#208978,#208979,#208980,#208981, + #208982,#208983,#208984,#208985,#208986,#208987,#208988,#208989, + #208990,#208991,#208992,#208993,#208994,#208995,#208996,#208997, + #208998,#208999,#209000,#209001,#209002,#209003,#209004,#209005, + #209006,#209007)); +#208976 = ORIENTED_EDGE('',*,*,#207941,.T.); +#208977 = ORIENTED_EDGE('',*,*,#207972,.T.); +#208978 = ORIENTED_EDGE('',*,*,#208003,.T.); +#208979 = ORIENTED_EDGE('',*,*,#208034,.T.); +#208980 = ORIENTED_EDGE('',*,*,#208065,.T.); +#208981 = ORIENTED_EDGE('',*,*,#208096,.T.); +#208982 = ORIENTED_EDGE('',*,*,#208127,.T.); +#208983 = ORIENTED_EDGE('',*,*,#208158,.T.); +#208984 = ORIENTED_EDGE('',*,*,#208189,.T.); +#208985 = ORIENTED_EDGE('',*,*,#208220,.T.); +#208986 = ORIENTED_EDGE('',*,*,#208251,.T.); +#208987 = ORIENTED_EDGE('',*,*,#208282,.T.); +#208988 = ORIENTED_EDGE('',*,*,#208313,.T.); +#208989 = ORIENTED_EDGE('',*,*,#208344,.T.); +#208990 = ORIENTED_EDGE('',*,*,#208375,.T.); +#208991 = ORIENTED_EDGE('',*,*,#208407,.T.); +#208992 = ORIENTED_EDGE('',*,*,#208439,.T.); +#208993 = ORIENTED_EDGE('',*,*,#208470,.T.); +#208994 = ORIENTED_EDGE('',*,*,#208501,.T.); +#208995 = ORIENTED_EDGE('',*,*,#208532,.T.); +#208996 = ORIENTED_EDGE('',*,*,#208563,.T.); +#208997 = ORIENTED_EDGE('',*,*,#208594,.T.); +#208998 = ORIENTED_EDGE('',*,*,#208625,.T.); +#208999 = ORIENTED_EDGE('',*,*,#208656,.T.); +#209000 = ORIENTED_EDGE('',*,*,#208687,.T.); +#209001 = ORIENTED_EDGE('',*,*,#208718,.T.); +#209002 = ORIENTED_EDGE('',*,*,#208749,.T.); +#209003 = ORIENTED_EDGE('',*,*,#208780,.T.); +#209004 = ORIENTED_EDGE('',*,*,#208811,.T.); +#209005 = ORIENTED_EDGE('',*,*,#208842,.T.); +#209006 = ORIENTED_EDGE('',*,*,#208874,.T.); +#209007 = ORIENTED_EDGE('',*,*,#208897,.T.); +#209008 = FACE_BOUND('',#209009,.F.); +#209009 = EDGE_LOOP('',(#209010)); +#209010 = ORIENTED_EDGE('',*,*,#208929,.T.); +#209011 = FACE_BOUND('',#209012,.F.); +#209012 = EDGE_LOOP('',(#209013)); +#209013 = ORIENTED_EDGE('',*,*,#208962,.T.); +#209014 = PLANE('',#209015); +#209015 = AXIS2_PLACEMENT_3D('',#209016,#209017,#209018); +#209016 = CARTESIAN_POINT('',(0.,0.,0.)); +#209017 = DIRECTION('',(-0.,-0.,-1.)); +#209018 = DIRECTION('',(-1.,0.,0.)); +#209019 = ADVANCED_FACE('',(#209020,#209054,#209057),#209060,.T.); +#209020 = FACE_BOUND('',#209021,.T.); +#209021 = EDGE_LOOP('',(#209022,#209023,#209024,#209025,#209026,#209027, + #209028,#209029,#209030,#209031,#209032,#209033,#209034,#209035, + #209036,#209037,#209038,#209039,#209040,#209041,#209042,#209043, + #209044,#209045,#209046,#209047,#209048,#209049,#209050,#209051, + #209052,#209053)); +#209022 = ORIENTED_EDGE('',*,*,#207925,.T.); +#209023 = ORIENTED_EDGE('',*,*,#207956,.T.); +#209024 = ORIENTED_EDGE('',*,*,#207987,.T.); +#209025 = ORIENTED_EDGE('',*,*,#208018,.T.); +#209026 = ORIENTED_EDGE('',*,*,#208049,.T.); +#209027 = ORIENTED_EDGE('',*,*,#208080,.T.); +#209028 = ORIENTED_EDGE('',*,*,#208111,.T.); +#209029 = ORIENTED_EDGE('',*,*,#208142,.T.); +#209030 = ORIENTED_EDGE('',*,*,#208173,.T.); +#209031 = ORIENTED_EDGE('',*,*,#208204,.T.); +#209032 = ORIENTED_EDGE('',*,*,#208235,.T.); +#209033 = ORIENTED_EDGE('',*,*,#208266,.T.); +#209034 = ORIENTED_EDGE('',*,*,#208297,.T.); +#209035 = ORIENTED_EDGE('',*,*,#208328,.T.); +#209036 = ORIENTED_EDGE('',*,*,#208359,.T.); +#209037 = ORIENTED_EDGE('',*,*,#208390,.T.); +#209038 = ORIENTED_EDGE('',*,*,#208423,.T.); +#209039 = ORIENTED_EDGE('',*,*,#208454,.T.); +#209040 = ORIENTED_EDGE('',*,*,#208485,.T.); +#209041 = ORIENTED_EDGE('',*,*,#208516,.T.); +#209042 = ORIENTED_EDGE('',*,*,#208547,.T.); +#209043 = ORIENTED_EDGE('',*,*,#208578,.T.); +#209044 = ORIENTED_EDGE('',*,*,#208609,.T.); +#209045 = ORIENTED_EDGE('',*,*,#208640,.T.); +#209046 = ORIENTED_EDGE('',*,*,#208671,.T.); +#209047 = ORIENTED_EDGE('',*,*,#208702,.T.); +#209048 = ORIENTED_EDGE('',*,*,#208733,.T.); +#209049 = ORIENTED_EDGE('',*,*,#208764,.T.); +#209050 = ORIENTED_EDGE('',*,*,#208795,.T.); +#209051 = ORIENTED_EDGE('',*,*,#208826,.T.); +#209052 = ORIENTED_EDGE('',*,*,#208857,.T.); +#209053 = ORIENTED_EDGE('',*,*,#208890,.T.); +#209054 = FACE_BOUND('',#209055,.T.); +#209055 = EDGE_LOOP('',(#209056)); +#209056 = ORIENTED_EDGE('',*,*,#208921,.T.); +#209057 = FACE_BOUND('',#209058,.T.); +#209058 = EDGE_LOOP('',(#209059)); +#209059 = ORIENTED_EDGE('',*,*,#208954,.T.); +#209060 = PLANE('',#209061); +#209061 = AXIS2_PLACEMENT_3D('',#209062,#209063,#209064); +#209062 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#209063 = DIRECTION('',(-0.,-0.,-1.)); +#209064 = DIRECTION('',(-1.,0.,0.)); +#209065 = MANIFOLD_SOLID_BREP('',#209066); +#209066 = CLOSED_SHELL('',(#209067,#209107,#209138,#209169,#209200, + #209231,#209262,#209293,#209324,#209355,#209386,#209417,#209448, + #209479,#209510,#209541,#209572,#209605,#209636,#209667,#209698, + #209729,#209760,#209793,#209824,#209855,#209886,#209917,#209948, + #209979,#210010,#210041,#210074,#210096,#210129,#210173)); +#209067 = ADVANCED_FACE('',(#209068),#209102,.T.); +#209068 = FACE_BOUND('',#209069,.T.); +#209069 = EDGE_LOOP('',(#209070,#209080,#209088,#209096)); +#209070 = ORIENTED_EDGE('',*,*,#209071,.T.); +#209071 = EDGE_CURVE('',#209072,#209074,#209076,.T.); +#209072 = VERTEX_POINT('',#209073); +#209073 = CARTESIAN_POINT('',(149.6,-85.78113,1.51)); +#209074 = VERTEX_POINT('',#209075); +#209075 = CARTESIAN_POINT('',(149.6,-85.78113,1.545)); +#209076 = LINE('',#209077,#209078); +#209077 = CARTESIAN_POINT('',(149.6,-85.78113,1.51)); +#209078 = VECTOR('',#209079,1.); +#209079 = DIRECTION('',(0.,0.,1.)); +#209080 = ORIENTED_EDGE('',*,*,#209081,.T.); +#209081 = EDGE_CURVE('',#209074,#209082,#209084,.T.); +#209082 = VERTEX_POINT('',#209083); +#209083 = CARTESIAN_POINT('',(149.6,-88.724263,1.545)); +#209084 = LINE('',#209085,#209086); +#209085 = CARTESIAN_POINT('',(149.6,-85.78113,1.545)); +#209086 = VECTOR('',#209087,1.); +#209087 = DIRECTION('',(0.,-1.,0.)); +#209088 = ORIENTED_EDGE('',*,*,#209089,.F.); +#209089 = EDGE_CURVE('',#209090,#209082,#209092,.T.); +#209090 = VERTEX_POINT('',#209091); +#209091 = CARTESIAN_POINT('',(149.6,-88.724263,1.51)); +#209092 = LINE('',#209093,#209094); +#209093 = CARTESIAN_POINT('',(149.6,-88.724263,1.51)); +#209094 = VECTOR('',#209095,1.); +#209095 = DIRECTION('',(0.,0.,1.)); +#209096 = ORIENTED_EDGE('',*,*,#209097,.F.); +#209097 = EDGE_CURVE('',#209072,#209090,#209098,.T.); +#209098 = LINE('',#209099,#209100); +#209099 = CARTESIAN_POINT('',(149.6,-85.78113,1.51)); +#209100 = VECTOR('',#209101,1.); +#209101 = DIRECTION('',(0.,-1.,0.)); +#209102 = PLANE('',#209103); +#209103 = AXIS2_PLACEMENT_3D('',#209104,#209105,#209106); +#209104 = CARTESIAN_POINT('',(149.6,-85.78113,1.51)); +#209105 = DIRECTION('',(1.,0.,-0.)); +#209106 = DIRECTION('',(0.,-1.,0.)); +#209107 = ADVANCED_FACE('',(#209108),#209133,.T.); +#209108 = FACE_BOUND('',#209109,.T.); +#209109 = EDGE_LOOP('',(#209110,#209111,#209119,#209127)); +#209110 = ORIENTED_EDGE('',*,*,#209089,.T.); +#209111 = ORIENTED_EDGE('',*,*,#209112,.T.); +#209112 = EDGE_CURVE('',#209082,#209113,#209115,.T.); +#209113 = VERTEX_POINT('',#209114); +#209114 = CARTESIAN_POINT('',(149.983147,-89.110128,1.545)); +#209115 = LINE('',#209116,#209117); +#209116 = CARTESIAN_POINT('',(149.6,-88.724263,1.545)); +#209117 = VECTOR('',#209118,1.); +#209118 = DIRECTION('',(0.704603178368,-0.709601550896,0.)); +#209119 = ORIENTED_EDGE('',*,*,#209120,.F.); +#209120 = EDGE_CURVE('',#209121,#209113,#209123,.T.); +#209121 = VERTEX_POINT('',#209122); +#209122 = CARTESIAN_POINT('',(149.983147,-89.110128,1.51)); +#209123 = LINE('',#209124,#209125); +#209124 = CARTESIAN_POINT('',(149.983147,-89.110128,1.51)); +#209125 = VECTOR('',#209126,1.); +#209126 = DIRECTION('',(0.,0.,1.)); +#209127 = ORIENTED_EDGE('',*,*,#209128,.F.); +#209128 = EDGE_CURVE('',#209090,#209121,#209129,.T.); +#209129 = LINE('',#209130,#209131); +#209130 = CARTESIAN_POINT('',(149.6,-88.724263,1.51)); +#209131 = VECTOR('',#209132,1.); +#209132 = DIRECTION('',(0.704603178368,-0.709601550896,0.)); +#209133 = PLANE('',#209134); +#209134 = AXIS2_PLACEMENT_3D('',#209135,#209136,#209137); +#209135 = CARTESIAN_POINT('',(149.6,-88.724263,1.51)); +#209136 = DIRECTION('',(0.709601550896,0.704603178368,-0.)); +#209137 = DIRECTION('',(0.704603178368,-0.709601550896,0.)); +#209138 = ADVANCED_FACE('',(#209139),#209164,.T.); +#209139 = FACE_BOUND('',#209140,.T.); +#209140 = EDGE_LOOP('',(#209141,#209142,#209150,#209158)); +#209141 = ORIENTED_EDGE('',*,*,#209120,.T.); +#209142 = ORIENTED_EDGE('',*,*,#209143,.T.); +#209143 = EDGE_CURVE('',#209113,#209144,#209146,.T.); +#209144 = VERTEX_POINT('',#209145); +#209145 = CARTESIAN_POINT('',(149.998079,-89.146176,1.545)); +#209146 = LINE('',#209147,#209148); +#209147 = CARTESIAN_POINT('',(149.983147,-89.110128,1.545)); +#209148 = VECTOR('',#209149,1.); +#209149 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209150 = ORIENTED_EDGE('',*,*,#209151,.F.); +#209151 = EDGE_CURVE('',#209152,#209144,#209154,.T.); +#209152 = VERTEX_POINT('',#209153); +#209153 = CARTESIAN_POINT('',(149.998079,-89.146176,1.51)); +#209154 = LINE('',#209155,#209156); +#209155 = CARTESIAN_POINT('',(149.998079,-89.146176,1.51)); +#209156 = VECTOR('',#209157,1.); +#209157 = DIRECTION('',(0.,0.,1.)); +#209158 = ORIENTED_EDGE('',*,*,#209159,.F.); +#209159 = EDGE_CURVE('',#209121,#209152,#209160,.T.); +#209160 = LINE('',#209161,#209162); +#209161 = CARTESIAN_POINT('',(149.983147,-89.110128,1.51)); +#209162 = VECTOR('',#209163,1.); +#209163 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209164 = PLANE('',#209165); +#209165 = AXIS2_PLACEMENT_3D('',#209166,#209167,#209168); +#209166 = CARTESIAN_POINT('',(149.983147,-89.110128,1.51)); +#209167 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#209168 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209169 = ADVANCED_FACE('',(#209170),#209195,.T.); +#209170 = FACE_BOUND('',#209171,.T.); +#209171 = EDGE_LOOP('',(#209172,#209173,#209181,#209189)); +#209172 = ORIENTED_EDGE('',*,*,#209151,.T.); +#209173 = ORIENTED_EDGE('',*,*,#209174,.T.); +#209174 = EDGE_CURVE('',#209144,#209175,#209177,.T.); +#209175 = VERTEX_POINT('',#209176); +#209176 = CARTESIAN_POINT('',(150.,-91.292892,1.545)); +#209177 = LINE('',#209178,#209179); +#209178 = CARTESIAN_POINT('',(149.998079,-89.146176,1.545)); +#209179 = VECTOR('',#209180,1.); +#209180 = DIRECTION('',(8.948548531221E-04,-0.999999599617,0.)); +#209181 = ORIENTED_EDGE('',*,*,#209182,.F.); +#209182 = EDGE_CURVE('',#209183,#209175,#209185,.T.); +#209183 = VERTEX_POINT('',#209184); +#209184 = CARTESIAN_POINT('',(150.,-91.292892,1.51)); +#209185 = LINE('',#209186,#209187); +#209186 = CARTESIAN_POINT('',(150.,-91.292892,1.51)); +#209187 = VECTOR('',#209188,1.); +#209188 = DIRECTION('',(0.,0.,1.)); +#209189 = ORIENTED_EDGE('',*,*,#209190,.F.); +#209190 = EDGE_CURVE('',#209152,#209183,#209191,.T.); +#209191 = LINE('',#209192,#209193); +#209192 = CARTESIAN_POINT('',(149.998079,-89.146176,1.51)); +#209193 = VECTOR('',#209194,1.); +#209194 = DIRECTION('',(8.948548531221E-04,-0.999999599617,0.)); +#209195 = PLANE('',#209196); +#209196 = AXIS2_PLACEMENT_3D('',#209197,#209198,#209199); +#209197 = CARTESIAN_POINT('',(149.998079,-89.146176,1.51)); +#209198 = DIRECTION('',(0.999999599617,8.948548531221E-04,-0.)); +#209199 = DIRECTION('',(8.948548531221E-04,-0.999999599617,0.)); +#209200 = ADVANCED_FACE('',(#209201),#209226,.T.); +#209201 = FACE_BOUND('',#209202,.T.); +#209202 = EDGE_LOOP('',(#209203,#209204,#209212,#209220)); +#209203 = ORIENTED_EDGE('',*,*,#209182,.T.); +#209204 = ORIENTED_EDGE('',*,*,#209205,.T.); +#209205 = EDGE_CURVE('',#209175,#209206,#209208,.T.); +#209206 = VERTEX_POINT('',#209207); +#209207 = CARTESIAN_POINT('',(152.383148,-93.678757,1.545)); +#209208 = LINE('',#209209,#209210); +#209209 = CARTESIAN_POINT('',(150.,-91.292892,1.545)); +#209210 = VECTOR('',#209211,1.); +#209211 = DIRECTION('',(0.706703813929,-0.707509518931,0.)); +#209212 = ORIENTED_EDGE('',*,*,#209213,.F.); +#209213 = EDGE_CURVE('',#209214,#209206,#209216,.T.); +#209214 = VERTEX_POINT('',#209215); +#209215 = CARTESIAN_POINT('',(152.383148,-93.678757,1.51)); +#209216 = LINE('',#209217,#209218); +#209217 = CARTESIAN_POINT('',(152.383148,-93.678757,1.51)); +#209218 = VECTOR('',#209219,1.); +#209219 = DIRECTION('',(0.,0.,1.)); +#209220 = ORIENTED_EDGE('',*,*,#209221,.F.); +#209221 = EDGE_CURVE('',#209183,#209214,#209222,.T.); +#209222 = LINE('',#209223,#209224); +#209223 = CARTESIAN_POINT('',(150.,-91.292892,1.51)); +#209224 = VECTOR('',#209225,1.); +#209225 = DIRECTION('',(0.706703813929,-0.707509518931,0.)); +#209226 = PLANE('',#209227); +#209227 = AXIS2_PLACEMENT_3D('',#209228,#209229,#209230); +#209228 = CARTESIAN_POINT('',(150.,-91.292892,1.51)); +#209229 = DIRECTION('',(0.707509518931,0.706703813929,-0.)); +#209230 = DIRECTION('',(0.706703813929,-0.707509518931,0.)); +#209231 = ADVANCED_FACE('',(#209232),#209257,.T.); +#209232 = FACE_BOUND('',#209233,.T.); +#209233 = EDGE_LOOP('',(#209234,#209235,#209243,#209251)); +#209234 = ORIENTED_EDGE('',*,*,#209213,.T.); +#209235 = ORIENTED_EDGE('',*,*,#209236,.T.); +#209236 = EDGE_CURVE('',#209206,#209237,#209239,.T.); +#209237 = VERTEX_POINT('',#209238); +#209238 = CARTESIAN_POINT('',(152.398079,-93.714805,1.545)); +#209239 = LINE('',#209240,#209241); +#209240 = CARTESIAN_POINT('',(152.383148,-93.678757,1.545)); +#209241 = VECTOR('',#209242,1.); +#209242 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#209243 = ORIENTED_EDGE('',*,*,#209244,.F.); +#209244 = EDGE_CURVE('',#209245,#209237,#209247,.T.); +#209245 = VERTEX_POINT('',#209246); +#209246 = CARTESIAN_POINT('',(152.398079,-93.714805,1.51)); +#209247 = LINE('',#209248,#209249); +#209248 = CARTESIAN_POINT('',(152.398079,-93.714805,1.51)); +#209249 = VECTOR('',#209250,1.); +#209250 = DIRECTION('',(0.,0.,1.)); +#209251 = ORIENTED_EDGE('',*,*,#209252,.F.); +#209252 = EDGE_CURVE('',#209214,#209245,#209253,.T.); +#209253 = LINE('',#209254,#209255); +#209254 = CARTESIAN_POINT('',(152.383148,-93.678757,1.51)); +#209255 = VECTOR('',#209256,1.); +#209256 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#209257 = PLANE('',#209258); +#209258 = AXIS2_PLACEMENT_3D('',#209259,#209260,#209261); +#209259 = CARTESIAN_POINT('',(152.383148,-93.678757,1.51)); +#209260 = DIRECTION('',(0.923884701879,0.382670952168,-0.)); +#209261 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#209262 = ADVANCED_FACE('',(#209263),#209288,.T.); +#209263 = FACE_BOUND('',#209264,.T.); +#209264 = EDGE_LOOP('',(#209265,#209266,#209274,#209282)); +#209265 = ORIENTED_EDGE('',*,*,#209244,.T.); +#209266 = ORIENTED_EDGE('',*,*,#209267,.T.); +#209267 = EDGE_CURVE('',#209237,#209268,#209270,.T.); +#209268 = VERTEX_POINT('',#209269); +#209269 = CARTESIAN_POINT('',(152.4,-99.2,1.545)); +#209270 = LINE('',#209271,#209272); +#209271 = CARTESIAN_POINT('',(152.398079,-93.714805,1.545)); +#209272 = VECTOR('',#209273,1.); +#209273 = DIRECTION('',(3.50215422096E-04,-0.999999938675,0.)); +#209274 = ORIENTED_EDGE('',*,*,#209275,.F.); +#209275 = EDGE_CURVE('',#209276,#209268,#209278,.T.); +#209276 = VERTEX_POINT('',#209277); +#209277 = CARTESIAN_POINT('',(152.4,-99.2,1.51)); +#209278 = LINE('',#209279,#209280); +#209279 = CARTESIAN_POINT('',(152.4,-99.2,1.51)); +#209280 = VECTOR('',#209281,1.); +#209281 = DIRECTION('',(0.,0.,1.)); +#209282 = ORIENTED_EDGE('',*,*,#209283,.F.); +#209283 = EDGE_CURVE('',#209245,#209276,#209284,.T.); +#209284 = LINE('',#209285,#209286); +#209285 = CARTESIAN_POINT('',(152.398079,-93.714805,1.51)); +#209286 = VECTOR('',#209287,1.); +#209287 = DIRECTION('',(3.50215422096E-04,-0.999999938675,0.)); +#209288 = PLANE('',#209289); +#209289 = AXIS2_PLACEMENT_3D('',#209290,#209291,#209292); +#209290 = CARTESIAN_POINT('',(152.398079,-93.714805,1.51)); +#209291 = DIRECTION('',(0.999999938675,3.50215422096E-04,-0.)); +#209292 = DIRECTION('',(3.50215422096E-04,-0.999999938675,0.)); +#209293 = ADVANCED_FACE('',(#209294),#209319,.T.); +#209294 = FACE_BOUND('',#209295,.T.); +#209295 = EDGE_LOOP('',(#209296,#209297,#209305,#209313)); +#209296 = ORIENTED_EDGE('',*,*,#209275,.T.); +#209297 = ORIENTED_EDGE('',*,*,#209298,.T.); +#209298 = EDGE_CURVE('',#209268,#209299,#209301,.T.); +#209299 = VERTEX_POINT('',#209300); +#209300 = CARTESIAN_POINT('',(153.219509,-99.201921,1.545)); +#209301 = LINE('',#209302,#209303); +#209302 = CARTESIAN_POINT('',(152.4,-99.2,1.545)); +#209303 = VECTOR('',#209304,1.); +#209304 = DIRECTION('',(0.999997252641,-2.344080080046E-03,0.)); +#209305 = ORIENTED_EDGE('',*,*,#209306,.F.); +#209306 = EDGE_CURVE('',#209307,#209299,#209309,.T.); +#209307 = VERTEX_POINT('',#209308); +#209308 = CARTESIAN_POINT('',(153.219509,-99.201921,1.51)); +#209309 = LINE('',#209310,#209311); +#209310 = CARTESIAN_POINT('',(153.219509,-99.201921,1.51)); +#209311 = VECTOR('',#209312,1.); +#209312 = DIRECTION('',(0.,0.,1.)); +#209313 = ORIENTED_EDGE('',*,*,#209314,.F.); +#209314 = EDGE_CURVE('',#209276,#209307,#209315,.T.); +#209315 = LINE('',#209316,#209317); +#209316 = CARTESIAN_POINT('',(152.4,-99.2,1.51)); +#209317 = VECTOR('',#209318,1.); +#209318 = DIRECTION('',(0.999997252641,-2.344080080046E-03,0.)); +#209319 = PLANE('',#209320); +#209320 = AXIS2_PLACEMENT_3D('',#209321,#209322,#209323); +#209321 = CARTESIAN_POINT('',(152.4,-99.2,1.51)); +#209322 = DIRECTION('',(2.344080080046E-03,0.999997252641,-0.)); +#209323 = DIRECTION('',(0.999997252641,-2.344080080046E-03,0.)); +#209324 = ADVANCED_FACE('',(#209325),#209350,.T.); +#209325 = FACE_BOUND('',#209326,.T.); +#209326 = EDGE_LOOP('',(#209327,#209328,#209336,#209344)); +#209327 = ORIENTED_EDGE('',*,*,#209306,.T.); +#209328 = ORIENTED_EDGE('',*,*,#209329,.T.); +#209329 = EDGE_CURVE('',#209299,#209330,#209332,.T.); +#209330 = VERTEX_POINT('',#209331); +#209331 = CARTESIAN_POINT('',(153.255557,-99.216853,1.545)); +#209332 = LINE('',#209333,#209334); +#209333 = CARTESIAN_POINT('',(153.219509,-99.201921,1.545)); +#209334 = VECTOR('',#209335,1.); +#209335 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#209336 = ORIENTED_EDGE('',*,*,#209337,.F.); +#209337 = EDGE_CURVE('',#209338,#209330,#209340,.T.); +#209338 = VERTEX_POINT('',#209339); +#209339 = CARTESIAN_POINT('',(153.255557,-99.216853,1.51)); +#209340 = LINE('',#209341,#209342); +#209341 = CARTESIAN_POINT('',(153.255557,-99.216853,1.51)); +#209342 = VECTOR('',#209343,1.); +#209343 = DIRECTION('',(0.,0.,1.)); +#209344 = ORIENTED_EDGE('',*,*,#209345,.F.); +#209345 = EDGE_CURVE('',#209307,#209338,#209346,.T.); +#209346 = LINE('',#209347,#209348); +#209347 = CARTESIAN_POINT('',(153.219509,-99.201921,1.51)); +#209348 = VECTOR('',#209349,1.); +#209349 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#209350 = PLANE('',#209351); +#209351 = AXIS2_PLACEMENT_3D('',#209352,#209353,#209354); +#209352 = CARTESIAN_POINT('',(153.219509,-99.201921,1.51)); +#209353 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#209354 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#209355 = ADVANCED_FACE('',(#209356),#209381,.T.); +#209356 = FACE_BOUND('',#209357,.T.); +#209357 = EDGE_LOOP('',(#209358,#209359,#209367,#209375)); +#209358 = ORIENTED_EDGE('',*,*,#209337,.T.); +#209359 = ORIENTED_EDGE('',*,*,#209360,.T.); +#209360 = EDGE_CURVE('',#209330,#209361,#209363,.T.); +#209361 = VERTEX_POINT('',#209362); +#209362 = CARTESIAN_POINT('',(153.583147,-99.544443,1.545)); +#209363 = LINE('',#209364,#209365); +#209364 = CARTESIAN_POINT('',(153.255557,-99.216853,1.545)); +#209365 = VECTOR('',#209366,1.); +#209366 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#209367 = ORIENTED_EDGE('',*,*,#209368,.F.); +#209368 = EDGE_CURVE('',#209369,#209361,#209371,.T.); +#209369 = VERTEX_POINT('',#209370); +#209370 = CARTESIAN_POINT('',(153.583147,-99.544443,1.51)); +#209371 = LINE('',#209372,#209373); +#209372 = CARTESIAN_POINT('',(153.583147,-99.544443,1.51)); +#209373 = VECTOR('',#209374,1.); +#209374 = DIRECTION('',(0.,0.,1.)); +#209375 = ORIENTED_EDGE('',*,*,#209376,.F.); +#209376 = EDGE_CURVE('',#209338,#209369,#209377,.T.); +#209377 = LINE('',#209378,#209379); +#209378 = CARTESIAN_POINT('',(153.255557,-99.216853,1.51)); +#209379 = VECTOR('',#209380,1.); +#209380 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#209381 = PLANE('',#209382); +#209382 = AXIS2_PLACEMENT_3D('',#209383,#209384,#209385); +#209383 = CARTESIAN_POINT('',(153.255557,-99.216853,1.51)); +#209384 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#209385 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#209386 = ADVANCED_FACE('',(#209387),#209412,.T.); +#209387 = FACE_BOUND('',#209388,.T.); +#209388 = EDGE_LOOP('',(#209389,#209390,#209398,#209406)); +#209389 = ORIENTED_EDGE('',*,*,#209368,.T.); +#209390 = ORIENTED_EDGE('',*,*,#209391,.T.); +#209391 = EDGE_CURVE('',#209361,#209392,#209394,.T.); +#209392 = VERTEX_POINT('',#209393); +#209393 = CARTESIAN_POINT('',(153.598079,-99.580491,1.545)); +#209394 = LINE('',#209395,#209396); +#209395 = CARTESIAN_POINT('',(153.583147,-99.544443,1.545)); +#209396 = VECTOR('',#209397,1.); +#209397 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209398 = ORIENTED_EDGE('',*,*,#209399,.F.); +#209399 = EDGE_CURVE('',#209400,#209392,#209402,.T.); +#209400 = VERTEX_POINT('',#209401); +#209401 = CARTESIAN_POINT('',(153.598079,-99.580491,1.51)); +#209402 = LINE('',#209403,#209404); +#209403 = CARTESIAN_POINT('',(153.598079,-99.580491,1.51)); +#209404 = VECTOR('',#209405,1.); +#209405 = DIRECTION('',(0.,0.,1.)); +#209406 = ORIENTED_EDGE('',*,*,#209407,.F.); +#209407 = EDGE_CURVE('',#209369,#209400,#209408,.T.); +#209408 = LINE('',#209409,#209410); +#209409 = CARTESIAN_POINT('',(153.583147,-99.544443,1.51)); +#209410 = VECTOR('',#209411,1.); +#209411 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209412 = PLANE('',#209413); +#209413 = AXIS2_PLACEMENT_3D('',#209414,#209415,#209416); +#209414 = CARTESIAN_POINT('',(153.583147,-99.544443,1.51)); +#209415 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#209416 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209417 = ADVANCED_FACE('',(#209418),#209443,.T.); +#209418 = FACE_BOUND('',#209419,.T.); +#209419 = EDGE_LOOP('',(#209420,#209421,#209429,#209437)); +#209420 = ORIENTED_EDGE('',*,*,#209399,.T.); +#209421 = ORIENTED_EDGE('',*,*,#209422,.T.); +#209422 = EDGE_CURVE('',#209392,#209423,#209425,.T.); +#209423 = VERTEX_POINT('',#209424); +#209424 = CARTESIAN_POINT('',(153.598079,-100.885061,1.545)); +#209425 = LINE('',#209426,#209427); +#209426 = CARTESIAN_POINT('',(153.598079,-99.580491,1.545)); +#209427 = VECTOR('',#209428,1.); +#209428 = DIRECTION('',(0.,-1.,0.)); +#209429 = ORIENTED_EDGE('',*,*,#209430,.F.); +#209430 = EDGE_CURVE('',#209431,#209423,#209433,.T.); +#209431 = VERTEX_POINT('',#209432); +#209432 = CARTESIAN_POINT('',(153.598079,-100.885061,1.51)); +#209433 = LINE('',#209434,#209435); +#209434 = CARTESIAN_POINT('',(153.598079,-100.885061,1.51)); +#209435 = VECTOR('',#209436,1.); +#209436 = DIRECTION('',(0.,0.,1.)); +#209437 = ORIENTED_EDGE('',*,*,#209438,.F.); +#209438 = EDGE_CURVE('',#209400,#209431,#209439,.T.); +#209439 = LINE('',#209440,#209441); +#209440 = CARTESIAN_POINT('',(153.598079,-99.580491,1.51)); +#209441 = VECTOR('',#209442,1.); +#209442 = DIRECTION('',(0.,-1.,0.)); +#209443 = PLANE('',#209444); +#209444 = AXIS2_PLACEMENT_3D('',#209445,#209446,#209447); +#209445 = CARTESIAN_POINT('',(153.598079,-99.580491,1.51)); +#209446 = DIRECTION('',(1.,0.,-0.)); +#209447 = DIRECTION('',(0.,-1.,0.)); +#209448 = ADVANCED_FACE('',(#209449),#209474,.T.); +#209449 = FACE_BOUND('',#209450,.T.); +#209450 = EDGE_LOOP('',(#209451,#209452,#209460,#209468)); +#209451 = ORIENTED_EDGE('',*,*,#209430,.T.); +#209452 = ORIENTED_EDGE('',*,*,#209453,.T.); +#209453 = EDGE_CURVE('',#209423,#209454,#209456,.T.); +#209454 = VERTEX_POINT('',#209455); +#209455 = CARTESIAN_POINT('',(153.583147,-100.92111,1.545)); +#209456 = LINE('',#209457,#209458); +#209457 = CARTESIAN_POINT('',(153.598079,-100.885061,1.545)); +#209458 = VECTOR('',#209459,1.); +#209459 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#209460 = ORIENTED_EDGE('',*,*,#209461,.F.); +#209461 = EDGE_CURVE('',#209462,#209454,#209464,.T.); +#209462 = VERTEX_POINT('',#209463); +#209463 = CARTESIAN_POINT('',(153.583147,-100.92111,1.51)); +#209464 = LINE('',#209465,#209466); +#209465 = CARTESIAN_POINT('',(153.583147,-100.92111,1.51)); +#209466 = VECTOR('',#209467,1.); +#209467 = DIRECTION('',(0.,0.,1.)); +#209468 = ORIENTED_EDGE('',*,*,#209469,.F.); +#209469 = EDGE_CURVE('',#209431,#209462,#209470,.T.); +#209470 = LINE('',#209471,#209472); +#209471 = CARTESIAN_POINT('',(153.598079,-100.885061,1.51)); +#209472 = VECTOR('',#209473,1.); +#209473 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#209474 = PLANE('',#209475); +#209475 = AXIS2_PLACEMENT_3D('',#209476,#209477,#209478); +#209476 = CARTESIAN_POINT('',(153.598079,-100.885061,1.51)); +#209477 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#209478 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#209479 = ADVANCED_FACE('',(#209480),#209505,.T.); +#209480 = FACE_BOUND('',#209481,.T.); +#209481 = EDGE_LOOP('',(#209482,#209483,#209491,#209499)); +#209482 = ORIENTED_EDGE('',*,*,#209461,.T.); +#209483 = ORIENTED_EDGE('',*,*,#209484,.T.); +#209484 = EDGE_CURVE('',#209454,#209485,#209487,.T.); +#209485 = VERTEX_POINT('',#209486); +#209486 = CARTESIAN_POINT('',(152.671109,-101.833147,1.545)); +#209487 = LINE('',#209488,#209489); +#209488 = CARTESIAN_POINT('',(153.583147,-100.92111,1.545)); +#209489 = VECTOR('',#209490,1.); +#209490 = DIRECTION('',(-0.707107168839,-0.707106393534,0.)); +#209491 = ORIENTED_EDGE('',*,*,#209492,.F.); +#209492 = EDGE_CURVE('',#209493,#209485,#209495,.T.); +#209493 = VERTEX_POINT('',#209494); +#209494 = CARTESIAN_POINT('',(152.671109,-101.833147,1.51)); +#209495 = LINE('',#209496,#209497); +#209496 = CARTESIAN_POINT('',(152.671109,-101.833147,1.51)); +#209497 = VECTOR('',#209498,1.); +#209498 = DIRECTION('',(0.,0.,1.)); +#209499 = ORIENTED_EDGE('',*,*,#209500,.F.); +#209500 = EDGE_CURVE('',#209462,#209493,#209501,.T.); +#209501 = LINE('',#209502,#209503); +#209502 = CARTESIAN_POINT('',(153.583147,-100.92111,1.51)); +#209503 = VECTOR('',#209504,1.); +#209504 = DIRECTION('',(-0.707107168839,-0.707106393534,0.)); +#209505 = PLANE('',#209506); +#209506 = AXIS2_PLACEMENT_3D('',#209507,#209508,#209509); +#209507 = CARTESIAN_POINT('',(153.583147,-100.92111,1.51)); +#209508 = DIRECTION('',(0.707106393534,-0.707107168839,0.)); +#209509 = DIRECTION('',(-0.707107168839,-0.707106393534,0.)); +#209510 = ADVANCED_FACE('',(#209511),#209536,.T.); +#209511 = FACE_BOUND('',#209512,.T.); +#209512 = EDGE_LOOP('',(#209513,#209514,#209522,#209530)); +#209513 = ORIENTED_EDGE('',*,*,#209492,.T.); +#209514 = ORIENTED_EDGE('',*,*,#209515,.T.); +#209515 = EDGE_CURVE('',#209485,#209516,#209518,.T.); +#209516 = VERTEX_POINT('',#209517); +#209517 = CARTESIAN_POINT('',(152.635061,-101.848079,1.545)); +#209518 = LINE('',#209519,#209520); +#209519 = CARTESIAN_POINT('',(152.671109,-101.833147,1.545)); +#209520 = VECTOR('',#209521,1.); +#209521 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#209522 = ORIENTED_EDGE('',*,*,#209523,.F.); +#209523 = EDGE_CURVE('',#209524,#209516,#209526,.T.); +#209524 = VERTEX_POINT('',#209525); +#209525 = CARTESIAN_POINT('',(152.635061,-101.848079,1.51)); +#209526 = LINE('',#209527,#209528); +#209527 = CARTESIAN_POINT('',(152.635061,-101.848079,1.51)); +#209528 = VECTOR('',#209529,1.); +#209529 = DIRECTION('',(0.,0.,1.)); +#209530 = ORIENTED_EDGE('',*,*,#209531,.F.); +#209531 = EDGE_CURVE('',#209493,#209524,#209532,.T.); +#209532 = LINE('',#209533,#209534); +#209533 = CARTESIAN_POINT('',(152.671109,-101.833147,1.51)); +#209534 = VECTOR('',#209535,1.); +#209535 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#209536 = PLANE('',#209537); +#209537 = AXIS2_PLACEMENT_3D('',#209538,#209539,#209540); +#209538 = CARTESIAN_POINT('',(152.671109,-101.833147,1.51)); +#209539 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#209540 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#209541 = ADVANCED_FACE('',(#209542),#209567,.T.); +#209542 = FACE_BOUND('',#209543,.T.); +#209543 = EDGE_LOOP('',(#209544,#209545,#209553,#209561)); +#209544 = ORIENTED_EDGE('',*,*,#209523,.T.); +#209545 = ORIENTED_EDGE('',*,*,#209546,.T.); +#209546 = EDGE_CURVE('',#209516,#209547,#209549,.T.); +#209547 = VERTEX_POINT('',#209548); +#209548 = CARTESIAN_POINT('',(152.280491,-101.848079,1.545)); +#209549 = LINE('',#209550,#209551); +#209550 = CARTESIAN_POINT('',(152.635061,-101.848079,1.545)); +#209551 = VECTOR('',#209552,1.); +#209552 = DIRECTION('',(-1.,0.,0.)); +#209553 = ORIENTED_EDGE('',*,*,#209554,.F.); +#209554 = EDGE_CURVE('',#209555,#209547,#209557,.T.); +#209555 = VERTEX_POINT('',#209556); +#209556 = CARTESIAN_POINT('',(152.280491,-101.848079,1.51)); +#209557 = LINE('',#209558,#209559); +#209558 = CARTESIAN_POINT('',(152.280491,-101.848079,1.51)); +#209559 = VECTOR('',#209560,1.); +#209560 = DIRECTION('',(0.,0.,1.)); +#209561 = ORIENTED_EDGE('',*,*,#209562,.F.); +#209562 = EDGE_CURVE('',#209524,#209555,#209563,.T.); +#209563 = LINE('',#209564,#209565); +#209564 = CARTESIAN_POINT('',(152.635061,-101.848079,1.51)); +#209565 = VECTOR('',#209566,1.); +#209566 = DIRECTION('',(-1.,0.,0.)); +#209567 = PLANE('',#209568); +#209568 = AXIS2_PLACEMENT_3D('',#209569,#209570,#209571); +#209569 = CARTESIAN_POINT('',(152.635061,-101.848079,1.51)); +#209570 = DIRECTION('',(0.,-1.,0.)); +#209571 = DIRECTION('',(-1.,0.,0.)); +#209572 = ADVANCED_FACE('',(#209573),#209600,.T.); +#209573 = FACE_BOUND('',#209574,.T.); +#209574 = EDGE_LOOP('',(#209575,#209576,#209585,#209593)); +#209575 = ORIENTED_EDGE('',*,*,#209554,.T.); +#209576 = ORIENTED_EDGE('',*,*,#209577,.T.); +#209577 = EDGE_CURVE('',#209547,#209578,#209580,.T.); +#209578 = VERTEX_POINT('',#209579); +#209579 = CARTESIAN_POINT('',(152.280491,-101.651921,1.545)); +#209580 = CIRCLE('',#209581,0.100000456609); +#209581 = AXIS2_PLACEMENT_3D('',#209582,#209583,#209584); +#209582 = CARTESIAN_POINT('',(152.3,-101.75,1.545)); +#209583 = DIRECTION('',(0.,0.,-1.)); +#209584 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#209585 = ORIENTED_EDGE('',*,*,#209586,.F.); +#209586 = EDGE_CURVE('',#209587,#209578,#209589,.T.); +#209587 = VERTEX_POINT('',#209588); +#209588 = CARTESIAN_POINT('',(152.280491,-101.651921,1.51)); +#209589 = LINE('',#209590,#209591); +#209590 = CARTESIAN_POINT('',(152.280491,-101.651921,1.51)); +#209591 = VECTOR('',#209592,1.); +#209592 = DIRECTION('',(0.,0.,1.)); +#209593 = ORIENTED_EDGE('',*,*,#209594,.F.); +#209594 = EDGE_CURVE('',#209555,#209587,#209595,.T.); +#209595 = CIRCLE('',#209596,0.100000456609); +#209596 = AXIS2_PLACEMENT_3D('',#209597,#209598,#209599); +#209597 = CARTESIAN_POINT('',(152.3,-101.75,1.51)); +#209598 = DIRECTION('',(0.,0.,-1.)); +#209599 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#209600 = CYLINDRICAL_SURFACE('',#209601,0.100000456609); +#209601 = AXIS2_PLACEMENT_3D('',#209602,#209603,#209604); +#209602 = CARTESIAN_POINT('',(152.3,-101.75,1.51)); +#209603 = DIRECTION('',(0.,0.,-1.)); +#209604 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#209605 = ADVANCED_FACE('',(#209606),#209631,.T.); +#209606 = FACE_BOUND('',#209607,.T.); +#209607 = EDGE_LOOP('',(#209608,#209609,#209617,#209625)); +#209608 = ORIENTED_EDGE('',*,*,#209586,.T.); +#209609 = ORIENTED_EDGE('',*,*,#209610,.T.); +#209610 = EDGE_CURVE('',#209578,#209611,#209613,.T.); +#209611 = VERTEX_POINT('',#209612); +#209612 = CARTESIAN_POINT('',(152.57413,-101.65,1.545)); +#209613 = LINE('',#209614,#209615); +#209614 = CARTESIAN_POINT('',(152.280491,-101.651921,1.545)); +#209615 = VECTOR('',#209616,1.); +#209616 = DIRECTION('',(0.9999786015,6.541906536524E-03,0.)); +#209617 = ORIENTED_EDGE('',*,*,#209618,.F.); +#209618 = EDGE_CURVE('',#209619,#209611,#209621,.T.); +#209619 = VERTEX_POINT('',#209620); +#209620 = CARTESIAN_POINT('',(152.57413,-101.65,1.51)); +#209621 = LINE('',#209622,#209623); +#209622 = CARTESIAN_POINT('',(152.57413,-101.65,1.51)); +#209623 = VECTOR('',#209624,1.); +#209624 = DIRECTION('',(0.,0.,1.)); +#209625 = ORIENTED_EDGE('',*,*,#209626,.F.); +#209626 = EDGE_CURVE('',#209587,#209619,#209627,.T.); +#209627 = LINE('',#209628,#209629); +#209628 = CARTESIAN_POINT('',(152.280491,-101.651921,1.51)); +#209629 = VECTOR('',#209630,1.); +#209630 = DIRECTION('',(0.9999786015,6.541906536524E-03,0.)); +#209631 = PLANE('',#209632); +#209632 = AXIS2_PLACEMENT_3D('',#209633,#209634,#209635); +#209633 = CARTESIAN_POINT('',(152.280491,-101.651921,1.51)); +#209634 = DIRECTION('',(-6.541906536524E-03,0.9999786015,0.)); +#209635 = DIRECTION('',(0.9999786015,6.541906536524E-03,0.)); +#209636 = ADVANCED_FACE('',(#209637),#209662,.T.); +#209637 = FACE_BOUND('',#209638,.T.); +#209638 = EDGE_LOOP('',(#209639,#209640,#209648,#209656)); +#209639 = ORIENTED_EDGE('',*,*,#209618,.T.); +#209640 = ORIENTED_EDGE('',*,*,#209641,.T.); +#209641 = EDGE_CURVE('',#209611,#209642,#209644,.T.); +#209642 = VERTEX_POINT('',#209643); +#209643 = CARTESIAN_POINT('',(153.4,-100.82413,1.545)); +#209644 = LINE('',#209645,#209646); +#209645 = CARTESIAN_POINT('',(152.57413,-101.65,1.545)); +#209646 = VECTOR('',#209647,1.); +#209647 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209648 = ORIENTED_EDGE('',*,*,#209649,.F.); +#209649 = EDGE_CURVE('',#209650,#209642,#209652,.T.); +#209650 = VERTEX_POINT('',#209651); +#209651 = CARTESIAN_POINT('',(153.4,-100.82413,1.51)); +#209652 = LINE('',#209653,#209654); +#209653 = CARTESIAN_POINT('',(153.4,-100.82413,1.51)); +#209654 = VECTOR('',#209655,1.); +#209655 = DIRECTION('',(0.,0.,1.)); +#209656 = ORIENTED_EDGE('',*,*,#209657,.F.); +#209657 = EDGE_CURVE('',#209619,#209650,#209658,.T.); +#209658 = LINE('',#209659,#209660); +#209659 = CARTESIAN_POINT('',(152.57413,-101.65,1.51)); +#209660 = VECTOR('',#209661,1.); +#209661 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209662 = PLANE('',#209663); +#209663 = AXIS2_PLACEMENT_3D('',#209664,#209665,#209666); +#209664 = CARTESIAN_POINT('',(152.57413,-101.65,1.51)); +#209665 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209666 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#209667 = ADVANCED_FACE('',(#209668),#209693,.T.); +#209668 = FACE_BOUND('',#209669,.T.); +#209669 = EDGE_LOOP('',(#209670,#209671,#209679,#209687)); +#209670 = ORIENTED_EDGE('',*,*,#209649,.T.); +#209671 = ORIENTED_EDGE('',*,*,#209672,.T.); +#209672 = EDGE_CURVE('',#209642,#209673,#209675,.T.); +#209673 = VERTEX_POINT('',#209674); +#209674 = CARTESIAN_POINT('',(153.4,-99.641422,1.545)); +#209675 = LINE('',#209676,#209677); +#209676 = CARTESIAN_POINT('',(153.4,-100.82413,1.545)); +#209677 = VECTOR('',#209678,1.); +#209678 = DIRECTION('',(0.,1.,0.)); +#209679 = ORIENTED_EDGE('',*,*,#209680,.F.); +#209680 = EDGE_CURVE('',#209681,#209673,#209683,.T.); +#209681 = VERTEX_POINT('',#209682); +#209682 = CARTESIAN_POINT('',(153.4,-99.641422,1.51)); +#209683 = LINE('',#209684,#209685); +#209684 = CARTESIAN_POINT('',(153.4,-99.641422,1.51)); +#209685 = VECTOR('',#209686,1.); +#209686 = DIRECTION('',(0.,0.,1.)); +#209687 = ORIENTED_EDGE('',*,*,#209688,.F.); +#209688 = EDGE_CURVE('',#209650,#209681,#209689,.T.); +#209689 = LINE('',#209690,#209691); +#209690 = CARTESIAN_POINT('',(153.4,-100.82413,1.51)); +#209691 = VECTOR('',#209692,1.); +#209692 = DIRECTION('',(0.,1.,0.)); +#209693 = PLANE('',#209694); +#209694 = AXIS2_PLACEMENT_3D('',#209695,#209696,#209697); +#209695 = CARTESIAN_POINT('',(153.4,-100.82413,1.51)); +#209696 = DIRECTION('',(-1.,0.,0.)); +#209697 = DIRECTION('',(0.,1.,0.)); +#209698 = ADVANCED_FACE('',(#209699),#209724,.T.); +#209699 = FACE_BOUND('',#209700,.T.); +#209700 = EDGE_LOOP('',(#209701,#209702,#209710,#209718)); +#209701 = ORIENTED_EDGE('',*,*,#209680,.T.); +#209702 = ORIENTED_EDGE('',*,*,#209703,.T.); +#209703 = EDGE_CURVE('',#209673,#209704,#209706,.T.); +#209704 = VERTEX_POINT('',#209705); +#209705 = CARTESIAN_POINT('',(153.158578,-99.4,1.545)); +#209706 = LINE('',#209707,#209708); +#209707 = CARTESIAN_POINT('',(153.4,-99.641422,1.545)); +#209708 = VECTOR('',#209709,1.); +#209709 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209710 = ORIENTED_EDGE('',*,*,#209711,.F.); +#209711 = EDGE_CURVE('',#209712,#209704,#209714,.T.); +#209712 = VERTEX_POINT('',#209713); +#209713 = CARTESIAN_POINT('',(153.158578,-99.4,1.51)); +#209714 = LINE('',#209715,#209716); +#209715 = CARTESIAN_POINT('',(153.158578,-99.4,1.51)); +#209716 = VECTOR('',#209717,1.); +#209717 = DIRECTION('',(0.,0.,1.)); +#209718 = ORIENTED_EDGE('',*,*,#209719,.F.); +#209719 = EDGE_CURVE('',#209681,#209712,#209720,.T.); +#209720 = LINE('',#209721,#209722); +#209721 = CARTESIAN_POINT('',(153.4,-99.641422,1.51)); +#209722 = VECTOR('',#209723,1.); +#209723 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209724 = PLANE('',#209725); +#209725 = AXIS2_PLACEMENT_3D('',#209726,#209727,#209728); +#209726 = CARTESIAN_POINT('',(153.4,-99.641422,1.51)); +#209727 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#209728 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#209729 = ADVANCED_FACE('',(#209730),#209755,.T.); +#209730 = FACE_BOUND('',#209731,.T.); +#209731 = EDGE_LOOP('',(#209732,#209733,#209741,#209749)); +#209732 = ORIENTED_EDGE('',*,*,#209711,.T.); +#209733 = ORIENTED_EDGE('',*,*,#209734,.T.); +#209734 = EDGE_CURVE('',#209704,#209735,#209737,.T.); +#209735 = VERTEX_POINT('',#209736); +#209736 = CARTESIAN_POINT('',(152.280491,-99.398079,1.545)); +#209737 = LINE('',#209738,#209739); +#209738 = CARTESIAN_POINT('',(153.158578,-99.4,1.545)); +#209739 = VECTOR('',#209740,1.); +#209740 = DIRECTION('',(-0.99999760697,2.187705094142E-03,0.)); +#209741 = ORIENTED_EDGE('',*,*,#209742,.F.); +#209742 = EDGE_CURVE('',#209743,#209735,#209745,.T.); +#209743 = VERTEX_POINT('',#209744); +#209744 = CARTESIAN_POINT('',(152.280491,-99.398079,1.51)); +#209745 = LINE('',#209746,#209747); +#209746 = CARTESIAN_POINT('',(152.280491,-99.398079,1.51)); +#209747 = VECTOR('',#209748,1.); +#209748 = DIRECTION('',(0.,0.,1.)); +#209749 = ORIENTED_EDGE('',*,*,#209750,.F.); +#209750 = EDGE_CURVE('',#209712,#209743,#209751,.T.); +#209751 = LINE('',#209752,#209753); +#209752 = CARTESIAN_POINT('',(153.158578,-99.4,1.51)); +#209753 = VECTOR('',#209754,1.); +#209754 = DIRECTION('',(-0.99999760697,2.187705094142E-03,0.)); +#209755 = PLANE('',#209756); +#209756 = AXIS2_PLACEMENT_3D('',#209757,#209758,#209759); +#209757 = CARTESIAN_POINT('',(153.158578,-99.4,1.51)); +#209758 = DIRECTION('',(-2.187705094142E-03,-0.99999760697,0.)); +#209759 = DIRECTION('',(-0.99999760697,2.187705094142E-03,0.)); +#209760 = ADVANCED_FACE('',(#209761),#209788,.T.); +#209761 = FACE_BOUND('',#209762,.T.); +#209762 = EDGE_LOOP('',(#209763,#209764,#209773,#209781)); +#209763 = ORIENTED_EDGE('',*,*,#209742,.T.); +#209764 = ORIENTED_EDGE('',*,*,#209765,.T.); +#209765 = EDGE_CURVE('',#209735,#209766,#209768,.T.); +#209766 = VERTEX_POINT('',#209767); +#209767 = CARTESIAN_POINT('',(152.201921,-99.319509,1.545)); +#209768 = CIRCLE('',#209769,0.100002891901); +#209769 = AXIS2_PLACEMENT_3D('',#209770,#209771,#209772); +#209770 = CARTESIAN_POINT('',(152.30000207103,-99.29999792896,1.545)); +#209771 = DIRECTION('',(0.,0.,-1.)); +#209772 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#209773 = ORIENTED_EDGE('',*,*,#209774,.F.); +#209774 = EDGE_CURVE('',#209775,#209766,#209777,.T.); +#209775 = VERTEX_POINT('',#209776); +#209776 = CARTESIAN_POINT('',(152.201921,-99.319509,1.51)); +#209777 = LINE('',#209778,#209779); +#209778 = CARTESIAN_POINT('',(152.201921,-99.319509,1.51)); +#209779 = VECTOR('',#209780,1.); +#209780 = DIRECTION('',(0.,0.,1.)); +#209781 = ORIENTED_EDGE('',*,*,#209782,.F.); +#209782 = EDGE_CURVE('',#209743,#209775,#209783,.T.); +#209783 = CIRCLE('',#209784,0.100002891901); +#209784 = AXIS2_PLACEMENT_3D('',#209785,#209786,#209787); +#209785 = CARTESIAN_POINT('',(152.30000207103,-99.29999792896,1.51)); +#209786 = DIRECTION('',(0.,0.,-1.)); +#209787 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#209788 = CYLINDRICAL_SURFACE('',#209789,0.100002891901); +#209789 = AXIS2_PLACEMENT_3D('',#209790,#209791,#209792); +#209790 = CARTESIAN_POINT('',(152.30000207103,-99.29999792896,1.51)); +#209791 = DIRECTION('',(0.,0.,-1.)); +#209792 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#209793 = ADVANCED_FACE('',(#209794),#209819,.T.); +#209794 = FACE_BOUND('',#209795,.T.); +#209795 = EDGE_LOOP('',(#209796,#209797,#209805,#209813)); +#209796 = ORIENTED_EDGE('',*,*,#209774,.T.); +#209797 = ORIENTED_EDGE('',*,*,#209798,.T.); +#209798 = EDGE_CURVE('',#209766,#209799,#209801,.T.); +#209799 = VERTEX_POINT('',#209800); +#209800 = CARTESIAN_POINT('',(152.2,-93.775735,1.545)); +#209801 = LINE('',#209802,#209803); +#209802 = CARTESIAN_POINT('',(152.201921,-99.319509,1.545)); +#209803 = VECTOR('',#209804,1.); +#209804 = DIRECTION('',(-3.465148263043E-04,0.999999939964,0.)); +#209805 = ORIENTED_EDGE('',*,*,#209806,.F.); +#209806 = EDGE_CURVE('',#209807,#209799,#209809,.T.); +#209807 = VERTEX_POINT('',#209808); +#209808 = CARTESIAN_POINT('',(152.2,-93.775735,1.51)); +#209809 = LINE('',#209810,#209811); +#209810 = CARTESIAN_POINT('',(152.2,-93.775735,1.51)); +#209811 = VECTOR('',#209812,1.); +#209812 = DIRECTION('',(0.,0.,1.)); +#209813 = ORIENTED_EDGE('',*,*,#209814,.F.); +#209814 = EDGE_CURVE('',#209775,#209807,#209815,.T.); +#209815 = LINE('',#209816,#209817); +#209816 = CARTESIAN_POINT('',(152.201921,-99.319509,1.51)); +#209817 = VECTOR('',#209818,1.); +#209818 = DIRECTION('',(-3.465148263043E-04,0.999999939964,0.)); +#209819 = PLANE('',#209820); +#209820 = AXIS2_PLACEMENT_3D('',#209821,#209822,#209823); +#209821 = CARTESIAN_POINT('',(152.201921,-99.319509,1.51)); +#209822 = DIRECTION('',(-0.999999939964,-3.465148263043E-04,0.)); +#209823 = DIRECTION('',(-3.465148263043E-04,0.999999939964,0.)); +#209824 = ADVANCED_FACE('',(#209825),#209850,.T.); +#209825 = FACE_BOUND('',#209826,.T.); +#209826 = EDGE_LOOP('',(#209827,#209828,#209836,#209844)); +#209827 = ORIENTED_EDGE('',*,*,#209806,.T.); +#209828 = ORIENTED_EDGE('',*,*,#209829,.T.); +#209829 = EDGE_CURVE('',#209799,#209830,#209832,.T.); +#209830 = VERTEX_POINT('',#209831); +#209831 = CARTESIAN_POINT('',(149.816853,-91.389871,1.545)); +#209832 = LINE('',#209833,#209834); +#209833 = CARTESIAN_POINT('',(152.2,-93.775735,1.545)); +#209834 = VECTOR('',#209835,1.); +#209835 = DIRECTION('',(-0.70670381376,0.7075095191,0.)); +#209836 = ORIENTED_EDGE('',*,*,#209837,.F.); +#209837 = EDGE_CURVE('',#209838,#209830,#209840,.T.); +#209838 = VERTEX_POINT('',#209839); +#209839 = CARTESIAN_POINT('',(149.816853,-91.389871,1.51)); +#209840 = LINE('',#209841,#209842); +#209841 = CARTESIAN_POINT('',(149.816853,-91.389871,1.51)); +#209842 = VECTOR('',#209843,1.); +#209843 = DIRECTION('',(0.,0.,1.)); +#209844 = ORIENTED_EDGE('',*,*,#209845,.F.); +#209845 = EDGE_CURVE('',#209807,#209838,#209846,.T.); +#209846 = LINE('',#209847,#209848); +#209847 = CARTESIAN_POINT('',(152.2,-93.775735,1.51)); +#209848 = VECTOR('',#209849,1.); +#209849 = DIRECTION('',(-0.70670381376,0.7075095191,0.)); +#209850 = PLANE('',#209851); +#209851 = AXIS2_PLACEMENT_3D('',#209852,#209853,#209854); +#209852 = CARTESIAN_POINT('',(152.2,-93.775735,1.51)); +#209853 = DIRECTION('',(-0.7075095191,-0.70670381376,0.)); +#209854 = DIRECTION('',(-0.70670381376,0.7075095191,0.)); +#209855 = ADVANCED_FACE('',(#209856),#209881,.T.); +#209856 = FACE_BOUND('',#209857,.T.); +#209857 = EDGE_LOOP('',(#209858,#209859,#209867,#209875)); +#209858 = ORIENTED_EDGE('',*,*,#209837,.T.); +#209859 = ORIENTED_EDGE('',*,*,#209860,.T.); +#209860 = EDGE_CURVE('',#209830,#209861,#209863,.T.); +#209861 = VERTEX_POINT('',#209862); +#209862 = CARTESIAN_POINT('',(149.801921,-91.353823,1.545)); +#209863 = LINE('',#209864,#209865); +#209864 = CARTESIAN_POINT('',(149.816853,-91.389871,1.545)); +#209865 = VECTOR('',#209866,1.); +#209866 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209867 = ORIENTED_EDGE('',*,*,#209868,.F.); +#209868 = EDGE_CURVE('',#209869,#209861,#209871,.T.); +#209869 = VERTEX_POINT('',#209870); +#209870 = CARTESIAN_POINT('',(149.801921,-91.353823,1.51)); +#209871 = LINE('',#209872,#209873); +#209872 = CARTESIAN_POINT('',(149.801921,-91.353823,1.51)); +#209873 = VECTOR('',#209874,1.); +#209874 = DIRECTION('',(0.,0.,1.)); +#209875 = ORIENTED_EDGE('',*,*,#209876,.F.); +#209876 = EDGE_CURVE('',#209838,#209869,#209877,.T.); +#209877 = LINE('',#209878,#209879); +#209878 = CARTESIAN_POINT('',(149.816853,-91.389871,1.51)); +#209879 = VECTOR('',#209880,1.); +#209880 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209881 = PLANE('',#209882); +#209882 = AXIS2_PLACEMENT_3D('',#209883,#209884,#209885); +#209883 = CARTESIAN_POINT('',(149.816853,-91.389871,1.51)); +#209884 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#209885 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209886 = ADVANCED_FACE('',(#209887),#209912,.T.); +#209887 = FACE_BOUND('',#209888,.T.); +#209888 = EDGE_LOOP('',(#209889,#209890,#209898,#209906)); +#209889 = ORIENTED_EDGE('',*,*,#209868,.T.); +#209890 = ORIENTED_EDGE('',*,*,#209891,.T.); +#209891 = EDGE_CURVE('',#209861,#209892,#209894,.T.); +#209892 = VERTEX_POINT('',#209893); +#209893 = CARTESIAN_POINT('',(149.8,-89.207106,1.545)); +#209894 = LINE('',#209895,#209896); +#209895 = CARTESIAN_POINT('',(149.801921,-91.353823,1.545)); +#209896 = VECTOR('',#209897,1.); +#209897 = DIRECTION('',(-8.948544362611E-04,0.999999599618,0.)); +#209898 = ORIENTED_EDGE('',*,*,#209899,.F.); +#209899 = EDGE_CURVE('',#209900,#209892,#209902,.T.); +#209900 = VERTEX_POINT('',#209901); +#209901 = CARTESIAN_POINT('',(149.8,-89.207106,1.51)); +#209902 = LINE('',#209903,#209904); +#209903 = CARTESIAN_POINT('',(149.8,-89.207106,1.51)); +#209904 = VECTOR('',#209905,1.); +#209905 = DIRECTION('',(0.,0.,1.)); +#209906 = ORIENTED_EDGE('',*,*,#209907,.F.); +#209907 = EDGE_CURVE('',#209869,#209900,#209908,.T.); +#209908 = LINE('',#209909,#209910); +#209909 = CARTESIAN_POINT('',(149.801921,-91.353823,1.51)); +#209910 = VECTOR('',#209911,1.); +#209911 = DIRECTION('',(-8.948544362611E-04,0.999999599618,0.)); +#209912 = PLANE('',#209913); +#209913 = AXIS2_PLACEMENT_3D('',#209914,#209915,#209916); +#209914 = CARTESIAN_POINT('',(149.801921,-91.353823,1.51)); +#209915 = DIRECTION('',(-0.999999599618,-8.948544362611E-04,0.)); +#209916 = DIRECTION('',(-8.948544362611E-04,0.999999599618,0.)); +#209917 = ADVANCED_FACE('',(#209918),#209943,.T.); +#209918 = FACE_BOUND('',#209919,.T.); +#209919 = EDGE_LOOP('',(#209920,#209921,#209929,#209937)); +#209920 = ORIENTED_EDGE('',*,*,#209899,.T.); +#209921 = ORIENTED_EDGE('',*,*,#209922,.T.); +#209922 = EDGE_CURVE('',#209892,#209923,#209925,.T.); +#209923 = VERTEX_POINT('',#209924); +#209924 = CARTESIAN_POINT('',(149.416853,-88.821242,1.545)); +#209925 = LINE('',#209926,#209927); +#209926 = CARTESIAN_POINT('',(149.8,-89.207106,1.545)); +#209927 = VECTOR('',#209928,1.); +#209928 = DIRECTION('',(-0.70460409784,0.709600637899,0.)); +#209929 = ORIENTED_EDGE('',*,*,#209930,.F.); +#209930 = EDGE_CURVE('',#209931,#209923,#209933,.T.); +#209931 = VERTEX_POINT('',#209932); +#209932 = CARTESIAN_POINT('',(149.416853,-88.821242,1.51)); +#209933 = LINE('',#209934,#209935); +#209934 = CARTESIAN_POINT('',(149.416853,-88.821242,1.51)); +#209935 = VECTOR('',#209936,1.); +#209936 = DIRECTION('',(0.,0.,1.)); +#209937 = ORIENTED_EDGE('',*,*,#209938,.F.); +#209938 = EDGE_CURVE('',#209900,#209931,#209939,.T.); +#209939 = LINE('',#209940,#209941); +#209940 = CARTESIAN_POINT('',(149.8,-89.207106,1.51)); +#209941 = VECTOR('',#209942,1.); +#209942 = DIRECTION('',(-0.70460409784,0.709600637899,0.)); +#209943 = PLANE('',#209944); +#209944 = AXIS2_PLACEMENT_3D('',#209945,#209946,#209947); +#209945 = CARTESIAN_POINT('',(149.8,-89.207106,1.51)); +#209946 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#209947 = DIRECTION('',(-0.70460409784,0.709600637899,0.)); +#209948 = ADVANCED_FACE('',(#209949),#209974,.T.); +#209949 = FACE_BOUND('',#209950,.T.); +#209950 = EDGE_LOOP('',(#209951,#209952,#209960,#209968)); +#209951 = ORIENTED_EDGE('',*,*,#209930,.T.); +#209952 = ORIENTED_EDGE('',*,*,#209953,.T.); +#209953 = EDGE_CURVE('',#209923,#209954,#209956,.T.); +#209954 = VERTEX_POINT('',#209955); +#209955 = CARTESIAN_POINT('',(149.401921,-88.785194,1.545)); +#209956 = LINE('',#209957,#209958); +#209957 = CARTESIAN_POINT('',(149.416853,-88.821242,1.545)); +#209958 = VECTOR('',#209959,1.); +#209959 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209960 = ORIENTED_EDGE('',*,*,#209961,.F.); +#209961 = EDGE_CURVE('',#209962,#209954,#209964,.T.); +#209962 = VERTEX_POINT('',#209963); +#209963 = CARTESIAN_POINT('',(149.401921,-88.785194,1.51)); +#209964 = LINE('',#209965,#209966); +#209965 = CARTESIAN_POINT('',(149.401921,-88.785194,1.51)); +#209966 = VECTOR('',#209967,1.); +#209967 = DIRECTION('',(0.,0.,1.)); +#209968 = ORIENTED_EDGE('',*,*,#209969,.F.); +#209969 = EDGE_CURVE('',#209931,#209962,#209970,.T.); +#209970 = LINE('',#209971,#209972); +#209971 = CARTESIAN_POINT('',(149.416853,-88.821242,1.51)); +#209972 = VECTOR('',#209973,1.); +#209973 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209974 = PLANE('',#209975); +#209975 = AXIS2_PLACEMENT_3D('',#209976,#209977,#209978); +#209976 = CARTESIAN_POINT('',(149.416853,-88.821242,1.51)); +#209977 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#209978 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#209979 = ADVANCED_FACE('',(#209980),#210005,.T.); +#209980 = FACE_BOUND('',#209981,.T.); +#209981 = EDGE_LOOP('',(#209982,#209983,#209991,#209999)); +#209982 = ORIENTED_EDGE('',*,*,#209961,.T.); +#209983 = ORIENTED_EDGE('',*,*,#209984,.T.); +#209984 = EDGE_CURVE('',#209954,#209985,#209987,.T.); +#209985 = VERTEX_POINT('',#209986); +#209986 = CARTESIAN_POINT('',(149.4,-85.78113,1.545)); +#209987 = LINE('',#209988,#209989); +#209988 = CARTESIAN_POINT('',(149.401921,-88.785194,1.545)); +#209989 = VECTOR('',#209990,1.); +#209990 = DIRECTION('',(-6.394669378601E-04,0.999999795541,0.)); +#209991 = ORIENTED_EDGE('',*,*,#209992,.F.); +#209992 = EDGE_CURVE('',#209993,#209985,#209995,.T.); +#209993 = VERTEX_POINT('',#209994); +#209994 = CARTESIAN_POINT('',(149.4,-85.78113,1.51)); +#209995 = LINE('',#209996,#209997); +#209996 = CARTESIAN_POINT('',(149.4,-85.78113,1.51)); +#209997 = VECTOR('',#209998,1.); +#209998 = DIRECTION('',(0.,0.,1.)); +#209999 = ORIENTED_EDGE('',*,*,#210000,.F.); +#210000 = EDGE_CURVE('',#209962,#209993,#210001,.T.); +#210001 = LINE('',#210002,#210003); +#210002 = CARTESIAN_POINT('',(149.401921,-88.785194,1.51)); +#210003 = VECTOR('',#210004,1.); +#210004 = DIRECTION('',(-6.394669378601E-04,0.999999795541,0.)); +#210005 = PLANE('',#210006); +#210006 = AXIS2_PLACEMENT_3D('',#210007,#210008,#210009); +#210007 = CARTESIAN_POINT('',(149.401921,-88.785194,1.51)); +#210008 = DIRECTION('',(-0.999999795541,-6.394669378601E-04,0.)); +#210009 = DIRECTION('',(-6.394669378601E-04,0.999999795541,0.)); +#210010 = ADVANCED_FACE('',(#210011),#210036,.T.); +#210011 = FACE_BOUND('',#210012,.T.); +#210012 = EDGE_LOOP('',(#210013,#210014,#210022,#210030)); +#210013 = ORIENTED_EDGE('',*,*,#209992,.T.); +#210014 = ORIENTED_EDGE('',*,*,#210015,.T.); +#210015 = EDGE_CURVE('',#209985,#210016,#210018,.T.); +#210016 = VERTEX_POINT('',#210017); +#210017 = CARTESIAN_POINT('',(149.385195,-85.777164,1.545)); +#210018 = LINE('',#210019,#210020); +#210019 = CARTESIAN_POINT('',(149.4,-85.78113,1.545)); +#210020 = VECTOR('',#210021,1.); +#210021 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#210022 = ORIENTED_EDGE('',*,*,#210023,.F.); +#210023 = EDGE_CURVE('',#210024,#210016,#210026,.T.); +#210024 = VERTEX_POINT('',#210025); +#210025 = CARTESIAN_POINT('',(149.385195,-85.777164,1.51)); +#210026 = LINE('',#210027,#210028); +#210027 = CARTESIAN_POINT('',(149.385195,-85.777164,1.51)); +#210028 = VECTOR('',#210029,1.); +#210029 = DIRECTION('',(0.,0.,1.)); +#210030 = ORIENTED_EDGE('',*,*,#210031,.F.); +#210031 = EDGE_CURVE('',#209993,#210024,#210032,.T.); +#210032 = LINE('',#210033,#210034); +#210033 = CARTESIAN_POINT('',(149.4,-85.78113,1.51)); +#210034 = VECTOR('',#210035,1.); +#210035 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#210036 = PLANE('',#210037); +#210037 = AXIS2_PLACEMENT_3D('',#210038,#210039,#210040); +#210038 = CARTESIAN_POINT('',(149.4,-85.78113,1.51)); +#210039 = DIRECTION('',(-0.258758913865,-0.9659419364,0.)); +#210040 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#210041 = ADVANCED_FACE('',(#210042),#210069,.T.); +#210042 = FACE_BOUND('',#210043,.T.); +#210043 = EDGE_LOOP('',(#210044,#210045,#210054,#210062)); +#210044 = ORIENTED_EDGE('',*,*,#210023,.T.); +#210045 = ORIENTED_EDGE('',*,*,#210046,.T.); +#210046 = EDGE_CURVE('',#210016,#210047,#210049,.T.); +#210047 = VERTEX_POINT('',#210048); +#210048 = CARTESIAN_POINT('',(149.614805,-85.777164,1.545)); +#210049 = CIRCLE('',#210050,0.299999472923); +#210050 = AXIS2_PLACEMENT_3D('',#210051,#210052,#210053); +#210051 = CARTESIAN_POINT('',(149.5,-85.50000069844,1.545)); +#210052 = DIRECTION('',(0.,0.,-1.)); +#210053 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#210054 = ORIENTED_EDGE('',*,*,#210055,.F.); +#210055 = EDGE_CURVE('',#210056,#210047,#210058,.T.); +#210056 = VERTEX_POINT('',#210057); +#210057 = CARTESIAN_POINT('',(149.614805,-85.777164,1.51)); +#210058 = LINE('',#210059,#210060); +#210059 = CARTESIAN_POINT('',(149.614805,-85.777164,1.51)); +#210060 = VECTOR('',#210061,1.); +#210061 = DIRECTION('',(0.,0.,1.)); +#210062 = ORIENTED_EDGE('',*,*,#210063,.F.); +#210063 = EDGE_CURVE('',#210024,#210056,#210064,.T.); +#210064 = CIRCLE('',#210065,0.299999472923); +#210065 = AXIS2_PLACEMENT_3D('',#210066,#210067,#210068); +#210066 = CARTESIAN_POINT('',(149.5,-85.50000069844,1.51)); +#210067 = DIRECTION('',(0.,0.,-1.)); +#210068 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#210069 = CYLINDRICAL_SURFACE('',#210070,0.299999472923); +#210070 = AXIS2_PLACEMENT_3D('',#210071,#210072,#210073); +#210071 = CARTESIAN_POINT('',(149.5,-85.50000069844,1.51)); +#210072 = DIRECTION('',(0.,0.,-1.)); +#210073 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#210074 = ADVANCED_FACE('',(#210075),#210091,.T.); +#210075 = FACE_BOUND('',#210076,.T.); +#210076 = EDGE_LOOP('',(#210077,#210078,#210084,#210085)); +#210077 = ORIENTED_EDGE('',*,*,#210055,.T.); +#210078 = ORIENTED_EDGE('',*,*,#210079,.T.); +#210079 = EDGE_CURVE('',#210047,#209074,#210080,.T.); +#210080 = LINE('',#210081,#210082); +#210081 = CARTESIAN_POINT('',(149.614805,-85.777164,1.545)); +#210082 = VECTOR('',#210083,1.); +#210083 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#210084 = ORIENTED_EDGE('',*,*,#209071,.F.); +#210085 = ORIENTED_EDGE('',*,*,#210086,.F.); +#210086 = EDGE_CURVE('',#210056,#209072,#210087,.T.); +#210087 = LINE('',#210088,#210089); +#210088 = CARTESIAN_POINT('',(149.614805,-85.777164,1.51)); +#210089 = VECTOR('',#210090,1.); +#210090 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#210091 = PLANE('',#210092); +#210092 = AXIS2_PLACEMENT_3D('',#210093,#210094,#210095); +#210093 = CARTESIAN_POINT('',(149.614805,-85.777164,1.51)); +#210094 = DIRECTION('',(0.258758913865,-0.9659419364,0.)); +#210095 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#210096 = ADVANCED_FACE('',(#210097),#210124,.F.); +#210097 = FACE_BOUND('',#210098,.T.); +#210098 = EDGE_LOOP('',(#210099,#210109,#210116,#210117)); +#210099 = ORIENTED_EDGE('',*,*,#210100,.T.); +#210100 = EDGE_CURVE('',#210101,#210103,#210105,.T.); +#210101 = VERTEX_POINT('',#210102); +#210102 = CARTESIAN_POINT('',(149.637255,-85.5,1.51)); +#210103 = VERTEX_POINT('',#210104); +#210104 = CARTESIAN_POINT('',(149.637255,-85.5,1.545)); +#210105 = LINE('',#210106,#210107); +#210106 = CARTESIAN_POINT('',(149.637255,-85.5,1.51)); +#210107 = VECTOR('',#210108,1.); +#210108 = DIRECTION('',(0.,0.,1.)); +#210109 = ORIENTED_EDGE('',*,*,#210110,.T.); +#210110 = EDGE_CURVE('',#210103,#210103,#210111,.T.); +#210111 = CIRCLE('',#210112,0.137255); +#210112 = AXIS2_PLACEMENT_3D('',#210113,#210114,#210115); +#210113 = CARTESIAN_POINT('',(149.5,-85.5,1.545)); +#210114 = DIRECTION('',(0.,0.,1.)); +#210115 = DIRECTION('',(1.,0.,-0.)); +#210116 = ORIENTED_EDGE('',*,*,#210100,.F.); +#210117 = ORIENTED_EDGE('',*,*,#210118,.F.); +#210118 = EDGE_CURVE('',#210101,#210101,#210119,.T.); +#210119 = CIRCLE('',#210120,0.137255); +#210120 = AXIS2_PLACEMENT_3D('',#210121,#210122,#210123); +#210121 = CARTESIAN_POINT('',(149.5,-85.5,1.51)); +#210122 = DIRECTION('',(0.,0.,1.)); +#210123 = DIRECTION('',(1.,0.,-0.)); +#210124 = CYLINDRICAL_SURFACE('',#210125,0.137255); +#210125 = AXIS2_PLACEMENT_3D('',#210126,#210127,#210128); +#210126 = CARTESIAN_POINT('',(149.5,-85.5,1.51)); +#210127 = DIRECTION('',(-0.,-0.,-1.)); +#210128 = DIRECTION('',(1.,0.,-0.)); +#210129 = ADVANCED_FACE('',(#210130,#210165),#210168,.F.); +#210130 = FACE_BOUND('',#210131,.T.); +#210131 = EDGE_LOOP('',(#210132,#210133,#210134,#210135,#210136,#210137, + #210138,#210139,#210140,#210141,#210142,#210143,#210144,#210145, + #210146,#210147,#210148,#210149,#210150,#210151,#210152,#210153, + #210154,#210155,#210156,#210157,#210158,#210159,#210160,#210161, + #210162,#210163,#210164)); +#210132 = ORIENTED_EDGE('',*,*,#209097,.T.); +#210133 = ORIENTED_EDGE('',*,*,#209128,.T.); +#210134 = ORIENTED_EDGE('',*,*,#209159,.T.); +#210135 = ORIENTED_EDGE('',*,*,#209190,.T.); +#210136 = ORIENTED_EDGE('',*,*,#209221,.T.); +#210137 = ORIENTED_EDGE('',*,*,#209252,.T.); +#210138 = ORIENTED_EDGE('',*,*,#209283,.T.); +#210139 = ORIENTED_EDGE('',*,*,#209314,.T.); +#210140 = ORIENTED_EDGE('',*,*,#209345,.T.); +#210141 = ORIENTED_EDGE('',*,*,#209376,.T.); +#210142 = ORIENTED_EDGE('',*,*,#209407,.T.); +#210143 = ORIENTED_EDGE('',*,*,#209438,.T.); +#210144 = ORIENTED_EDGE('',*,*,#209469,.T.); +#210145 = ORIENTED_EDGE('',*,*,#209500,.T.); +#210146 = ORIENTED_EDGE('',*,*,#209531,.T.); +#210147 = ORIENTED_EDGE('',*,*,#209562,.T.); +#210148 = ORIENTED_EDGE('',*,*,#209594,.T.); +#210149 = ORIENTED_EDGE('',*,*,#209626,.T.); +#210150 = ORIENTED_EDGE('',*,*,#209657,.T.); +#210151 = ORIENTED_EDGE('',*,*,#209688,.T.); +#210152 = ORIENTED_EDGE('',*,*,#209719,.T.); +#210153 = ORIENTED_EDGE('',*,*,#209750,.T.); +#210154 = ORIENTED_EDGE('',*,*,#209782,.T.); +#210155 = ORIENTED_EDGE('',*,*,#209814,.T.); +#210156 = ORIENTED_EDGE('',*,*,#209845,.T.); +#210157 = ORIENTED_EDGE('',*,*,#209876,.T.); +#210158 = ORIENTED_EDGE('',*,*,#209907,.T.); +#210159 = ORIENTED_EDGE('',*,*,#209938,.T.); +#210160 = ORIENTED_EDGE('',*,*,#209969,.T.); +#210161 = ORIENTED_EDGE('',*,*,#210000,.T.); +#210162 = ORIENTED_EDGE('',*,*,#210031,.T.); +#210163 = ORIENTED_EDGE('',*,*,#210063,.T.); +#210164 = ORIENTED_EDGE('',*,*,#210086,.T.); +#210165 = FACE_BOUND('',#210166,.T.); +#210166 = EDGE_LOOP('',(#210167)); +#210167 = ORIENTED_EDGE('',*,*,#210118,.T.); +#210168 = PLANE('',#210169); +#210169 = AXIS2_PLACEMENT_3D('',#210170,#210171,#210172); +#210170 = CARTESIAN_POINT('',(0.,0.,1.51)); +#210171 = DIRECTION('',(0.,0.,1.)); +#210172 = DIRECTION('',(1.,0.,-0.)); +#210173 = ADVANCED_FACE('',(#210174,#210209),#210212,.T.); +#210174 = FACE_BOUND('',#210175,.F.); +#210175 = EDGE_LOOP('',(#210176,#210177,#210178,#210179,#210180,#210181, + #210182,#210183,#210184,#210185,#210186,#210187,#210188,#210189, + #210190,#210191,#210192,#210193,#210194,#210195,#210196,#210197, + #210198,#210199,#210200,#210201,#210202,#210203,#210204,#210205, + #210206,#210207,#210208)); +#210176 = ORIENTED_EDGE('',*,*,#209081,.T.); +#210177 = ORIENTED_EDGE('',*,*,#209112,.T.); +#210178 = ORIENTED_EDGE('',*,*,#209143,.T.); +#210179 = ORIENTED_EDGE('',*,*,#209174,.T.); +#210180 = ORIENTED_EDGE('',*,*,#209205,.T.); +#210181 = ORIENTED_EDGE('',*,*,#209236,.T.); +#210182 = ORIENTED_EDGE('',*,*,#209267,.T.); +#210183 = ORIENTED_EDGE('',*,*,#209298,.T.); +#210184 = ORIENTED_EDGE('',*,*,#209329,.T.); +#210185 = ORIENTED_EDGE('',*,*,#209360,.T.); +#210186 = ORIENTED_EDGE('',*,*,#209391,.T.); +#210187 = ORIENTED_EDGE('',*,*,#209422,.T.); +#210188 = ORIENTED_EDGE('',*,*,#209453,.T.); +#210189 = ORIENTED_EDGE('',*,*,#209484,.T.); +#210190 = ORIENTED_EDGE('',*,*,#209515,.T.); +#210191 = ORIENTED_EDGE('',*,*,#209546,.T.); +#210192 = ORIENTED_EDGE('',*,*,#209577,.T.); +#210193 = ORIENTED_EDGE('',*,*,#209610,.T.); +#210194 = ORIENTED_EDGE('',*,*,#209641,.T.); +#210195 = ORIENTED_EDGE('',*,*,#209672,.T.); +#210196 = ORIENTED_EDGE('',*,*,#209703,.T.); +#210197 = ORIENTED_EDGE('',*,*,#209734,.T.); +#210198 = ORIENTED_EDGE('',*,*,#209765,.T.); +#210199 = ORIENTED_EDGE('',*,*,#209798,.T.); +#210200 = ORIENTED_EDGE('',*,*,#209829,.T.); +#210201 = ORIENTED_EDGE('',*,*,#209860,.T.); +#210202 = ORIENTED_EDGE('',*,*,#209891,.T.); +#210203 = ORIENTED_EDGE('',*,*,#209922,.T.); +#210204 = ORIENTED_EDGE('',*,*,#209953,.T.); +#210205 = ORIENTED_EDGE('',*,*,#209984,.T.); +#210206 = ORIENTED_EDGE('',*,*,#210015,.T.); +#210207 = ORIENTED_EDGE('',*,*,#210046,.T.); +#210208 = ORIENTED_EDGE('',*,*,#210079,.T.); +#210209 = FACE_BOUND('',#210210,.F.); +#210210 = EDGE_LOOP('',(#210211)); +#210211 = ORIENTED_EDGE('',*,*,#210110,.T.); +#210212 = PLANE('',#210213); +#210213 = AXIS2_PLACEMENT_3D('',#210214,#210215,#210216); +#210214 = CARTESIAN_POINT('',(0.,0.,1.545)); +#210215 = DIRECTION('',(0.,0.,1.)); +#210216 = DIRECTION('',(1.,0.,-0.)); +#210217 = MANIFOLD_SOLID_BREP('',#210218); +#210218 = CLOSED_SHELL('',(#210219,#210259,#210290,#210323,#210354, + #210385,#210416,#210447,#210480,#210502,#210535,#210555)); +#210219 = ADVANCED_FACE('',(#210220),#210254,.T.); +#210220 = FACE_BOUND('',#210221,.T.); +#210221 = EDGE_LOOP('',(#210222,#210232,#210240,#210248)); +#210222 = ORIENTED_EDGE('',*,*,#210223,.T.); +#210223 = EDGE_CURVE('',#210224,#210226,#210228,.T.); +#210224 = VERTEX_POINT('',#210225); +#210225 = CARTESIAN_POINT('',(147.137157,-75.055735,1.51)); +#210226 = VERTEX_POINT('',#210227); +#210227 = CARTESIAN_POINT('',(147.137157,-75.055735,1.545)); +#210228 = LINE('',#210229,#210230); +#210229 = CARTESIAN_POINT('',(147.137157,-75.055735,1.51)); +#210230 = VECTOR('',#210231,1.); +#210231 = DIRECTION('',(0.,0.,1.)); +#210232 = ORIENTED_EDGE('',*,*,#210233,.T.); +#210233 = EDGE_CURVE('',#210226,#210234,#210236,.T.); +#210234 = VERTEX_POINT('',#210235); +#210235 = CARTESIAN_POINT('',(148.863134,-75.055735,1.545)); +#210236 = LINE('',#210237,#210238); +#210237 = CARTESIAN_POINT('',(147.137157,-75.055735,1.545)); +#210238 = VECTOR('',#210239,1.); +#210239 = DIRECTION('',(1.,0.,0.)); +#210240 = ORIENTED_EDGE('',*,*,#210241,.F.); +#210241 = EDGE_CURVE('',#210242,#210234,#210244,.T.); +#210242 = VERTEX_POINT('',#210243); +#210243 = CARTESIAN_POINT('',(148.863134,-75.055735,1.51)); +#210244 = LINE('',#210245,#210246); +#210245 = CARTESIAN_POINT('',(148.863134,-75.055735,1.51)); +#210246 = VECTOR('',#210247,1.); +#210247 = DIRECTION('',(0.,0.,1.)); +#210248 = ORIENTED_EDGE('',*,*,#210249,.F.); +#210249 = EDGE_CURVE('',#210224,#210242,#210250,.T.); +#210250 = LINE('',#210251,#210252); +#210251 = CARTESIAN_POINT('',(147.137157,-75.055735,1.51)); +#210252 = VECTOR('',#210253,1.); +#210253 = DIRECTION('',(1.,0.,0.)); +#210254 = PLANE('',#210255); +#210255 = AXIS2_PLACEMENT_3D('',#210256,#210257,#210258); +#210256 = CARTESIAN_POINT('',(147.137157,-75.055735,1.51)); +#210257 = DIRECTION('',(0.,1.,0.)); +#210258 = DIRECTION('',(1.,0.,0.)); +#210259 = ADVANCED_FACE('',(#210260),#210285,.T.); +#210260 = FACE_BOUND('',#210261,.T.); +#210261 = EDGE_LOOP('',(#210262,#210263,#210271,#210279)); +#210262 = ORIENTED_EDGE('',*,*,#210241,.T.); +#210263 = ORIENTED_EDGE('',*,*,#210264,.T.); +#210264 = EDGE_CURVE('',#210234,#210265,#210267,.T.); +#210265 = VERTEX_POINT('',#210266); +#210266 = CARTESIAN_POINT('',(148.867101,-75.04093,1.545)); +#210267 = LINE('',#210268,#210269); +#210268 = CARTESIAN_POINT('',(148.863134,-75.055735,1.545)); +#210269 = VECTOR('',#210270,1.); +#210270 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#210271 = ORIENTED_EDGE('',*,*,#210272,.F.); +#210272 = EDGE_CURVE('',#210273,#210265,#210275,.T.); +#210273 = VERTEX_POINT('',#210274); +#210274 = CARTESIAN_POINT('',(148.867101,-75.04093,1.51)); +#210275 = LINE('',#210276,#210277); +#210276 = CARTESIAN_POINT('',(148.867101,-75.04093,1.51)); +#210277 = VECTOR('',#210278,1.); +#210278 = DIRECTION('',(0.,0.,1.)); +#210279 = ORIENTED_EDGE('',*,*,#210280,.F.); +#210280 = EDGE_CURVE('',#210242,#210273,#210281,.T.); +#210281 = LINE('',#210282,#210283); +#210282 = CARTESIAN_POINT('',(148.863134,-75.055735,1.51)); +#210283 = VECTOR('',#210284,1.); +#210284 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#210285 = PLANE('',#210286); +#210286 = AXIS2_PLACEMENT_3D('',#210287,#210288,#210289); +#210287 = CARTESIAN_POINT('',(148.863134,-75.055735,1.51)); +#210288 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#210289 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#210290 = ADVANCED_FACE('',(#210291),#210318,.T.); +#210291 = FACE_BOUND('',#210292,.T.); +#210292 = EDGE_LOOP('',(#210293,#210294,#210303,#210311)); +#210293 = ORIENTED_EDGE('',*,*,#210272,.T.); +#210294 = ORIENTED_EDGE('',*,*,#210295,.T.); +#210295 = EDGE_CURVE('',#210265,#210296,#210298,.T.); +#210296 = VERTEX_POINT('',#210297); +#210297 = CARTESIAN_POINT('',(148.867101,-75.27054,1.545)); +#210298 = CIRCLE('',#210299,0.299999850918); +#210299 = AXIS2_PLACEMENT_3D('',#210300,#210301,#210302); +#210300 = CARTESIAN_POINT('',(149.14426471069,-75.155735,1.545)); +#210301 = DIRECTION('',(0.,0.,-1.)); +#210302 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#210303 = ORIENTED_EDGE('',*,*,#210304,.F.); +#210304 = EDGE_CURVE('',#210305,#210296,#210307,.T.); +#210305 = VERTEX_POINT('',#210306); +#210306 = CARTESIAN_POINT('',(148.867101,-75.27054,1.51)); +#210307 = LINE('',#210308,#210309); +#210308 = CARTESIAN_POINT('',(148.867101,-75.27054,1.51)); +#210309 = VECTOR('',#210310,1.); +#210310 = DIRECTION('',(0.,0.,1.)); +#210311 = ORIENTED_EDGE('',*,*,#210312,.F.); +#210312 = EDGE_CURVE('',#210273,#210305,#210313,.T.); +#210313 = CIRCLE('',#210314,0.299999850918); +#210314 = AXIS2_PLACEMENT_3D('',#210315,#210316,#210317); +#210315 = CARTESIAN_POINT('',(149.14426471069,-75.155735,1.51)); +#210316 = DIRECTION('',(0.,0.,-1.)); +#210317 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#210318 = CYLINDRICAL_SURFACE('',#210319,0.299999850918); +#210319 = AXIS2_PLACEMENT_3D('',#210320,#210321,#210322); +#210320 = CARTESIAN_POINT('',(149.14426471069,-75.155735,1.51)); +#210321 = DIRECTION('',(0.,0.,-1.)); +#210322 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#210323 = ADVANCED_FACE('',(#210324),#210349,.T.); +#210324 = FACE_BOUND('',#210325,.T.); +#210325 = EDGE_LOOP('',(#210326,#210327,#210335,#210343)); +#210326 = ORIENTED_EDGE('',*,*,#210304,.T.); +#210327 = ORIENTED_EDGE('',*,*,#210328,.T.); +#210328 = EDGE_CURVE('',#210296,#210329,#210331,.T.); +#210329 = VERTEX_POINT('',#210330); +#210330 = CARTESIAN_POINT('',(148.863134,-75.255735,1.545)); +#210331 = LINE('',#210332,#210333); +#210332 = CARTESIAN_POINT('',(148.867101,-75.27054,1.545)); +#210333 = VECTOR('',#210334,1.); +#210334 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#210335 = ORIENTED_EDGE('',*,*,#210336,.F.); +#210336 = EDGE_CURVE('',#210337,#210329,#210339,.T.); +#210337 = VERTEX_POINT('',#210338); +#210338 = CARTESIAN_POINT('',(148.863134,-75.255735,1.51)); +#210339 = LINE('',#210340,#210341); +#210340 = CARTESIAN_POINT('',(148.863134,-75.255735,1.51)); +#210341 = VECTOR('',#210342,1.); +#210342 = DIRECTION('',(0.,0.,1.)); +#210343 = ORIENTED_EDGE('',*,*,#210344,.F.); +#210344 = EDGE_CURVE('',#210305,#210337,#210345,.T.); +#210345 = LINE('',#210346,#210347); +#210346 = CARTESIAN_POINT('',(148.867101,-75.27054,1.51)); +#210347 = VECTOR('',#210348,1.); +#210348 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#210349 = PLANE('',#210350); +#210350 = AXIS2_PLACEMENT_3D('',#210351,#210352,#210353); +#210351 = CARTESIAN_POINT('',(148.867101,-75.27054,1.51)); +#210352 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#210353 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#210354 = ADVANCED_FACE('',(#210355),#210380,.T.); +#210355 = FACE_BOUND('',#210356,.T.); +#210356 = EDGE_LOOP('',(#210357,#210358,#210366,#210374)); +#210357 = ORIENTED_EDGE('',*,*,#210336,.T.); +#210358 = ORIENTED_EDGE('',*,*,#210359,.T.); +#210359 = EDGE_CURVE('',#210329,#210360,#210362,.T.); +#210360 = VERTEX_POINT('',#210361); +#210361 = CARTESIAN_POINT('',(147.076226,-75.253814,1.545)); +#210362 = LINE('',#210363,#210364); +#210363 = CARTESIAN_POINT('',(148.863134,-75.255735,1.545)); +#210364 = VECTOR('',#210365,1.); +#210365 = DIRECTION('',(-0.999999422144,1.075040735132E-03,0.)); +#210366 = ORIENTED_EDGE('',*,*,#210367,.F.); +#210367 = EDGE_CURVE('',#210368,#210360,#210370,.T.); +#210368 = VERTEX_POINT('',#210369); +#210369 = CARTESIAN_POINT('',(147.076226,-75.253814,1.51)); +#210370 = LINE('',#210371,#210372); +#210371 = CARTESIAN_POINT('',(147.076226,-75.253814,1.51)); +#210372 = VECTOR('',#210373,1.); +#210373 = DIRECTION('',(0.,0.,1.)); +#210374 = ORIENTED_EDGE('',*,*,#210375,.F.); +#210375 = EDGE_CURVE('',#210337,#210368,#210376,.T.); +#210376 = LINE('',#210377,#210378); +#210377 = CARTESIAN_POINT('',(148.863134,-75.255735,1.51)); +#210378 = VECTOR('',#210379,1.); +#210379 = DIRECTION('',(-0.999999422144,1.075040735132E-03,0.)); +#210380 = PLANE('',#210381); +#210381 = AXIS2_PLACEMENT_3D('',#210382,#210383,#210384); +#210382 = CARTESIAN_POINT('',(148.863134,-75.255735,1.51)); +#210383 = DIRECTION('',(-1.075040735132E-03,-0.999999422144,0.)); +#210384 = DIRECTION('',(-0.999999422144,1.075040735132E-03,0.)); +#210385 = ADVANCED_FACE('',(#210386),#210411,.T.); +#210386 = FACE_BOUND('',#210387,.T.); +#210387 = EDGE_LOOP('',(#210388,#210389,#210397,#210405)); +#210388 = ORIENTED_EDGE('',*,*,#210367,.T.); +#210389 = ORIENTED_EDGE('',*,*,#210390,.T.); +#210390 = EDGE_CURVE('',#210360,#210391,#210393,.T.); +#210391 = VERTEX_POINT('',#210392); +#210392 = CARTESIAN_POINT('',(147.040178,-75.238882,1.545)); +#210393 = LINE('',#210394,#210395); +#210394 = CARTESIAN_POINT('',(147.076226,-75.253814,1.545)); +#210395 = VECTOR('',#210396,1.); +#210396 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#210397 = ORIENTED_EDGE('',*,*,#210398,.F.); +#210398 = EDGE_CURVE('',#210399,#210391,#210401,.T.); +#210399 = VERTEX_POINT('',#210400); +#210400 = CARTESIAN_POINT('',(147.040178,-75.238882,1.51)); +#210401 = LINE('',#210402,#210403); +#210402 = CARTESIAN_POINT('',(147.040178,-75.238882,1.51)); +#210403 = VECTOR('',#210404,1.); +#210404 = DIRECTION('',(0.,0.,1.)); +#210405 = ORIENTED_EDGE('',*,*,#210406,.F.); +#210406 = EDGE_CURVE('',#210368,#210399,#210407,.T.); +#210407 = LINE('',#210408,#210409); +#210408 = CARTESIAN_POINT('',(147.076226,-75.253814,1.51)); +#210409 = VECTOR('',#210410,1.); +#210410 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#210411 = PLANE('',#210412); +#210412 = AXIS2_PLACEMENT_3D('',#210413,#210414,#210415); +#210413 = CARTESIAN_POINT('',(147.076226,-75.253814,1.51)); +#210414 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#210415 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#210416 = ADVANCED_FACE('',(#210417),#210442,.T.); +#210417 = FACE_BOUND('',#210418,.T.); +#210418 = EDGE_LOOP('',(#210419,#210420,#210428,#210436)); +#210419 = ORIENTED_EDGE('',*,*,#210398,.T.); +#210420 = ORIENTED_EDGE('',*,*,#210421,.T.); +#210421 = EDGE_CURVE('',#210391,#210422,#210424,.T.); +#210422 = VERTEX_POINT('',#210423); +#210423 = CARTESIAN_POINT('',(146.666853,-74.865557,1.545)); +#210424 = LINE('',#210425,#210426); +#210425 = CARTESIAN_POINT('',(147.040178,-75.238882,1.545)); +#210426 = VECTOR('',#210427,1.); +#210427 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210428 = ORIENTED_EDGE('',*,*,#210429,.F.); +#210429 = EDGE_CURVE('',#210430,#210422,#210432,.T.); +#210430 = VERTEX_POINT('',#210431); +#210431 = CARTESIAN_POINT('',(146.666853,-74.865557,1.51)); +#210432 = LINE('',#210433,#210434); +#210433 = CARTESIAN_POINT('',(146.666853,-74.865557,1.51)); +#210434 = VECTOR('',#210435,1.); +#210435 = DIRECTION('',(0.,0.,1.)); +#210436 = ORIENTED_EDGE('',*,*,#210437,.F.); +#210437 = EDGE_CURVE('',#210399,#210430,#210438,.T.); +#210438 = LINE('',#210439,#210440); +#210439 = CARTESIAN_POINT('',(147.040178,-75.238882,1.51)); +#210440 = VECTOR('',#210441,1.); +#210441 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210442 = PLANE('',#210443); +#210443 = AXIS2_PLACEMENT_3D('',#210444,#210445,#210446); +#210444 = CARTESIAN_POINT('',(147.040178,-75.238882,1.51)); +#210445 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#210446 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#210447 = ADVANCED_FACE('',(#210448),#210475,.T.); +#210448 = FACE_BOUND('',#210449,.T.); +#210449 = EDGE_LOOP('',(#210450,#210451,#210460,#210468)); +#210450 = ORIENTED_EDGE('',*,*,#210429,.T.); +#210451 = ORIENTED_EDGE('',*,*,#210452,.T.); +#210452 = EDGE_CURVE('',#210422,#210453,#210455,.T.); +#210453 = VERTEX_POINT('',#210454); +#210454 = CARTESIAN_POINT('',(146.805557,-74.726853,1.545)); +#210455 = CIRCLE('',#210456,9.999988522643E-02); +#210456 = AXIS2_PLACEMENT_3D('',#210457,#210458,#210459); +#210457 = CARTESIAN_POINT('',(146.74999951407,-74.80999951407,1.545)); +#210458 = DIRECTION('',(0.,0.,-1.)); +#210459 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#210460 = ORIENTED_EDGE('',*,*,#210461,.F.); +#210461 = EDGE_CURVE('',#210462,#210453,#210464,.T.); +#210462 = VERTEX_POINT('',#210463); +#210463 = CARTESIAN_POINT('',(146.805557,-74.726853,1.51)); +#210464 = LINE('',#210465,#210466); +#210465 = CARTESIAN_POINT('',(146.805557,-74.726853,1.51)); +#210466 = VECTOR('',#210467,1.); +#210467 = DIRECTION('',(0.,0.,1.)); +#210468 = ORIENTED_EDGE('',*,*,#210469,.F.); +#210469 = EDGE_CURVE('',#210430,#210462,#210470,.T.); +#210470 = CIRCLE('',#210471,9.999988522643E-02); +#210471 = AXIS2_PLACEMENT_3D('',#210472,#210473,#210474); +#210472 = CARTESIAN_POINT('',(146.74999951407,-74.80999951407,1.51)); +#210473 = DIRECTION('',(0.,0.,-1.)); +#210474 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#210475 = CYLINDRICAL_SURFACE('',#210476,9.999988522643E-02); +#210476 = AXIS2_PLACEMENT_3D('',#210477,#210478,#210479); +#210477 = CARTESIAN_POINT('',(146.74999951407,-74.80999951407,1.51)); +#210478 = DIRECTION('',(0.,0.,-1.)); +#210479 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#210480 = ADVANCED_FACE('',(#210481),#210497,.T.); +#210481 = FACE_BOUND('',#210482,.T.); +#210482 = EDGE_LOOP('',(#210483,#210484,#210490,#210491)); +#210483 = ORIENTED_EDGE('',*,*,#210461,.T.); +#210484 = ORIENTED_EDGE('',*,*,#210485,.T.); +#210485 = EDGE_CURVE('',#210453,#210226,#210486,.T.); +#210486 = LINE('',#210487,#210488); +#210487 = CARTESIAN_POINT('',(146.805557,-74.726853,1.545)); +#210488 = VECTOR('',#210489,1.); +#210489 = DIRECTION('',(0.710010638515,-0.704190949385,0.)); +#210490 = ORIENTED_EDGE('',*,*,#210223,.F.); +#210491 = ORIENTED_EDGE('',*,*,#210492,.F.); +#210492 = EDGE_CURVE('',#210462,#210224,#210493,.T.); +#210493 = LINE('',#210494,#210495); +#210494 = CARTESIAN_POINT('',(146.805557,-74.726853,1.51)); +#210495 = VECTOR('',#210496,1.); +#210496 = DIRECTION('',(0.710010638515,-0.704190949385,0.)); +#210497 = PLANE('',#210498); +#210498 = AXIS2_PLACEMENT_3D('',#210499,#210500,#210501); +#210499 = CARTESIAN_POINT('',(146.805557,-74.726853,1.51)); +#210500 = DIRECTION('',(0.704190949385,0.710010638515,-0.)); +#210501 = DIRECTION('',(0.710010638515,-0.704190949385,0.)); +#210502 = ADVANCED_FACE('',(#210503),#210530,.F.); +#210503 = FACE_BOUND('',#210504,.T.); +#210504 = EDGE_LOOP('',(#210505,#210515,#210522,#210523)); +#210505 = ORIENTED_EDGE('',*,*,#210506,.T.); +#210506 = EDGE_CURVE('',#210507,#210509,#210511,.T.); +#210507 = VERTEX_POINT('',#210508); +#210508 = CARTESIAN_POINT('',(149.28152,-75.155735,1.51)); +#210509 = VERTEX_POINT('',#210510); +#210510 = CARTESIAN_POINT('',(149.28152,-75.155735,1.545)); +#210511 = LINE('',#210512,#210513); +#210512 = CARTESIAN_POINT('',(149.28152,-75.155735,1.51)); +#210513 = VECTOR('',#210514,1.); +#210514 = DIRECTION('',(0.,0.,1.)); +#210515 = ORIENTED_EDGE('',*,*,#210516,.T.); +#210516 = EDGE_CURVE('',#210509,#210509,#210517,.T.); +#210517 = CIRCLE('',#210518,0.137255); +#210518 = AXIS2_PLACEMENT_3D('',#210519,#210520,#210521); +#210519 = CARTESIAN_POINT('',(149.144265,-75.155735,1.545)); +#210520 = DIRECTION('',(0.,0.,1.)); +#210521 = DIRECTION('',(1.,0.,-0.)); +#210522 = ORIENTED_EDGE('',*,*,#210506,.F.); +#210523 = ORIENTED_EDGE('',*,*,#210524,.F.); +#210524 = EDGE_CURVE('',#210507,#210507,#210525,.T.); +#210525 = CIRCLE('',#210526,0.137255); +#210526 = AXIS2_PLACEMENT_3D('',#210527,#210528,#210529); +#210527 = CARTESIAN_POINT('',(149.144265,-75.155735,1.51)); +#210528 = DIRECTION('',(0.,0.,1.)); +#210529 = DIRECTION('',(1.,0.,-0.)); +#210530 = CYLINDRICAL_SURFACE('',#210531,0.137255); +#210531 = AXIS2_PLACEMENT_3D('',#210532,#210533,#210534); +#210532 = CARTESIAN_POINT('',(149.144265,-75.155735,1.51)); +#210533 = DIRECTION('',(-0.,-0.,-1.)); +#210534 = DIRECTION('',(1.,0.,-0.)); +#210535 = ADVANCED_FACE('',(#210536,#210547),#210550,.F.); +#210536 = FACE_BOUND('',#210537,.T.); +#210537 = EDGE_LOOP('',(#210538,#210539,#210540,#210541,#210542,#210543, + #210544,#210545,#210546)); +#210538 = ORIENTED_EDGE('',*,*,#210249,.T.); +#210539 = ORIENTED_EDGE('',*,*,#210280,.T.); +#210540 = ORIENTED_EDGE('',*,*,#210312,.T.); +#210541 = ORIENTED_EDGE('',*,*,#210344,.T.); +#210542 = ORIENTED_EDGE('',*,*,#210375,.T.); +#210543 = ORIENTED_EDGE('',*,*,#210406,.T.); +#210544 = ORIENTED_EDGE('',*,*,#210437,.T.); +#210545 = ORIENTED_EDGE('',*,*,#210469,.T.); +#210546 = ORIENTED_EDGE('',*,*,#210492,.T.); +#210547 = FACE_BOUND('',#210548,.T.); +#210548 = EDGE_LOOP('',(#210549)); +#210549 = ORIENTED_EDGE('',*,*,#210524,.T.); +#210550 = PLANE('',#210551); +#210551 = AXIS2_PLACEMENT_3D('',#210552,#210553,#210554); +#210552 = CARTESIAN_POINT('',(0.,0.,1.51)); +#210553 = DIRECTION('',(0.,0.,1.)); +#210554 = DIRECTION('',(1.,0.,-0.)); +#210555 = ADVANCED_FACE('',(#210556,#210567),#210570,.T.); +#210556 = FACE_BOUND('',#210557,.F.); +#210557 = EDGE_LOOP('',(#210558,#210559,#210560,#210561,#210562,#210563, + #210564,#210565,#210566)); +#210558 = ORIENTED_EDGE('',*,*,#210233,.T.); +#210559 = ORIENTED_EDGE('',*,*,#210264,.T.); +#210560 = ORIENTED_EDGE('',*,*,#210295,.T.); +#210561 = ORIENTED_EDGE('',*,*,#210328,.T.); +#210562 = ORIENTED_EDGE('',*,*,#210359,.T.); +#210563 = ORIENTED_EDGE('',*,*,#210390,.T.); +#210564 = ORIENTED_EDGE('',*,*,#210421,.T.); +#210565 = ORIENTED_EDGE('',*,*,#210452,.T.); +#210566 = ORIENTED_EDGE('',*,*,#210485,.T.); +#210567 = FACE_BOUND('',#210568,.F.); +#210568 = EDGE_LOOP('',(#210569)); +#210569 = ORIENTED_EDGE('',*,*,#210516,.T.); +#210570 = PLANE('',#210571); +#210571 = AXIS2_PLACEMENT_3D('',#210572,#210573,#210574); +#210572 = CARTESIAN_POINT('',(0.,0.,1.545)); +#210573 = DIRECTION('',(0.,0.,1.)); +#210574 = DIRECTION('',(1.,0.,-0.)); +#210575 = MANIFOLD_SOLID_BREP('',#210576); +#210576 = CLOSED_SHELL('',(#210577,#210617,#210648,#210679,#210710, + #210743,#210774,#210805,#210836,#210867,#210900,#210922,#210955, + #210988,#211013)); +#210577 = ADVANCED_FACE('',(#210578),#210612,.F.); +#210578 = FACE_BOUND('',#210579,.F.); +#210579 = EDGE_LOOP('',(#210580,#210590,#210598,#210606)); +#210580 = ORIENTED_EDGE('',*,*,#210581,.T.); +#210581 = EDGE_CURVE('',#210582,#210584,#210586,.T.); +#210582 = VERTEX_POINT('',#210583); +#210583 = CARTESIAN_POINT('',(149.413765,-75.283813,0.)); +#210584 = VERTEX_POINT('',#210585); +#210585 = CARTESIAN_POINT('',(149.413765,-75.283813,-3.5E-02)); +#210586 = LINE('',#210587,#210588); +#210587 = CARTESIAN_POINT('',(149.413765,-75.283813,0.)); +#210588 = VECTOR('',#210589,1.); +#210589 = DIRECTION('',(0.,0.,-1.)); +#210590 = ORIENTED_EDGE('',*,*,#210591,.T.); +#210591 = EDGE_CURVE('',#210584,#210592,#210594,.T.); +#210592 = VERTEX_POINT('',#210593); +#210593 = CARTESIAN_POINT('',(149.583147,-75.455913,-3.5E-02)); +#210594 = LINE('',#210595,#210596); +#210595 = CARTESIAN_POINT('',(149.413765,-75.283813,-3.5E-02)); +#210596 = VECTOR('',#210597,1.); +#210597 = DIRECTION('',(0.701456399425,-0.712712368144,0.)); +#210598 = ORIENTED_EDGE('',*,*,#210599,.F.); +#210599 = EDGE_CURVE('',#210600,#210592,#210602,.T.); +#210600 = VERTEX_POINT('',#210601); +#210601 = CARTESIAN_POINT('',(149.583147,-75.455913,0.)); +#210602 = LINE('',#210603,#210604); +#210603 = CARTESIAN_POINT('',(149.583147,-75.455913,0.)); +#210604 = VECTOR('',#210605,1.); +#210605 = DIRECTION('',(0.,0.,-1.)); +#210606 = ORIENTED_EDGE('',*,*,#210607,.F.); +#210607 = EDGE_CURVE('',#210582,#210600,#210608,.T.); +#210608 = LINE('',#210609,#210610); +#210609 = CARTESIAN_POINT('',(149.413765,-75.283813,0.)); +#210610 = VECTOR('',#210611,1.); +#210611 = DIRECTION('',(0.701456399425,-0.712712368144,0.)); +#210612 = PLANE('',#210613); +#210613 = AXIS2_PLACEMENT_3D('',#210614,#210615,#210616); +#210614 = CARTESIAN_POINT('',(149.413765,-75.283813,0.)); +#210615 = DIRECTION('',(-0.712712368144,-0.701456399425,-0.)); +#210616 = DIRECTION('',(0.701456399425,-0.712712368144,0.)); +#210617 = ADVANCED_FACE('',(#210618),#210643,.F.); +#210618 = FACE_BOUND('',#210619,.F.); +#210619 = EDGE_LOOP('',(#210620,#210621,#210629,#210637)); +#210620 = ORIENTED_EDGE('',*,*,#210599,.T.); +#210621 = ORIENTED_EDGE('',*,*,#210622,.T.); +#210622 = EDGE_CURVE('',#210592,#210623,#210625,.T.); +#210623 = VERTEX_POINT('',#210624); +#210624 = CARTESIAN_POINT('',(149.598079,-75.491961,-3.5E-02)); +#210625 = LINE('',#210626,#210627); +#210626 = CARTESIAN_POINT('',(149.583147,-75.455913,-3.5E-02)); +#210627 = VECTOR('',#210628,1.); +#210628 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#210629 = ORIENTED_EDGE('',*,*,#210630,.F.); +#210630 = EDGE_CURVE('',#210631,#210623,#210633,.T.); +#210631 = VERTEX_POINT('',#210632); +#210632 = CARTESIAN_POINT('',(149.598079,-75.491961,0.)); +#210633 = LINE('',#210634,#210635); +#210634 = CARTESIAN_POINT('',(149.598079,-75.491961,0.)); +#210635 = VECTOR('',#210636,1.); +#210636 = DIRECTION('',(0.,0.,-1.)); +#210637 = ORIENTED_EDGE('',*,*,#210638,.F.); +#210638 = EDGE_CURVE('',#210600,#210631,#210639,.T.); +#210639 = LINE('',#210640,#210641); +#210640 = CARTESIAN_POINT('',(149.583147,-75.455913,0.)); +#210641 = VECTOR('',#210642,1.); +#210642 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#210643 = PLANE('',#210644); +#210644 = AXIS2_PLACEMENT_3D('',#210645,#210646,#210647); +#210645 = CARTESIAN_POINT('',(149.583147,-75.455913,0.)); +#210646 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#210647 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#210648 = ADVANCED_FACE('',(#210649),#210674,.F.); +#210649 = FACE_BOUND('',#210650,.F.); +#210650 = EDGE_LOOP('',(#210651,#210652,#210660,#210668)); +#210651 = ORIENTED_EDGE('',*,*,#210630,.T.); +#210652 = ORIENTED_EDGE('',*,*,#210653,.T.); +#210653 = EDGE_CURVE('',#210623,#210654,#210656,.T.); +#210654 = VERTEX_POINT('',#210655); +#210655 = CARTESIAN_POINT('',(149.6,-85.218869,-3.5E-02)); +#210656 = LINE('',#210657,#210658); +#210657 = CARTESIAN_POINT('',(149.598079,-75.491961,-3.5E-02)); +#210658 = VECTOR('',#210659,1.); +#210659 = DIRECTION('',(1.974933825342E-04,-0.999999980498,0.)); +#210660 = ORIENTED_EDGE('',*,*,#210661,.F.); +#210661 = EDGE_CURVE('',#210662,#210654,#210664,.T.); +#210662 = VERTEX_POINT('',#210663); +#210663 = CARTESIAN_POINT('',(149.6,-85.218869,0.)); +#210664 = LINE('',#210665,#210666); +#210665 = CARTESIAN_POINT('',(149.6,-85.218869,0.)); +#210666 = VECTOR('',#210667,1.); +#210667 = DIRECTION('',(0.,0.,-1.)); +#210668 = ORIENTED_EDGE('',*,*,#210669,.F.); +#210669 = EDGE_CURVE('',#210631,#210662,#210670,.T.); +#210670 = LINE('',#210671,#210672); +#210671 = CARTESIAN_POINT('',(149.598079,-75.491961,0.)); +#210672 = VECTOR('',#210673,1.); +#210673 = DIRECTION('',(1.974933825342E-04,-0.999999980498,0.)); +#210674 = PLANE('',#210675); +#210675 = AXIS2_PLACEMENT_3D('',#210676,#210677,#210678); +#210676 = CARTESIAN_POINT('',(149.598079,-75.491961,0.)); +#210677 = DIRECTION('',(-0.999999980498,-1.974933825342E-04,-0.)); +#210678 = DIRECTION('',(1.974933825342E-04,-0.999999980498,0.)); +#210679 = ADVANCED_FACE('',(#210680),#210705,.F.); +#210680 = FACE_BOUND('',#210681,.F.); +#210681 = EDGE_LOOP('',(#210682,#210683,#210691,#210699)); +#210682 = ORIENTED_EDGE('',*,*,#210661,.T.); +#210683 = ORIENTED_EDGE('',*,*,#210684,.T.); +#210684 = EDGE_CURVE('',#210654,#210685,#210687,.T.); +#210685 = VERTEX_POINT('',#210686); +#210686 = CARTESIAN_POINT('',(149.614805,-85.222836,-3.5E-02)); +#210687 = LINE('',#210688,#210689); +#210688 = CARTESIAN_POINT('',(149.6,-85.218869,-3.5E-02)); +#210689 = VECTOR('',#210690,1.); +#210690 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#210691 = ORIENTED_EDGE('',*,*,#210692,.F.); +#210692 = EDGE_CURVE('',#210693,#210685,#210695,.T.); +#210693 = VERTEX_POINT('',#210694); +#210694 = CARTESIAN_POINT('',(149.614805,-85.222836,0.)); +#210695 = LINE('',#210696,#210697); +#210696 = CARTESIAN_POINT('',(149.614805,-85.222836,0.)); +#210697 = VECTOR('',#210698,1.); +#210698 = DIRECTION('',(0.,0.,-1.)); +#210699 = ORIENTED_EDGE('',*,*,#210700,.F.); +#210700 = EDGE_CURVE('',#210662,#210693,#210701,.T.); +#210701 = LINE('',#210702,#210703); +#210702 = CARTESIAN_POINT('',(149.6,-85.218869,0.)); +#210703 = VECTOR('',#210704,1.); +#210704 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#210705 = PLANE('',#210706); +#210706 = AXIS2_PLACEMENT_3D('',#210707,#210708,#210709); +#210707 = CARTESIAN_POINT('',(149.6,-85.218869,0.)); +#210708 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#210709 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#210710 = ADVANCED_FACE('',(#210711),#210738,.T.); +#210711 = FACE_BOUND('',#210712,.F.); +#210712 = EDGE_LOOP('',(#210713,#210714,#210723,#210731)); +#210713 = ORIENTED_EDGE('',*,*,#210692,.T.); +#210714 = ORIENTED_EDGE('',*,*,#210715,.T.); +#210715 = EDGE_CURVE('',#210685,#210716,#210718,.T.); +#210716 = VERTEX_POINT('',#210717); +#210717 = CARTESIAN_POINT('',(149.385195,-85.222836,-3.5E-02)); +#210718 = CIRCLE('',#210719,0.299999850918); +#210719 = AXIS2_PLACEMENT_3D('',#210720,#210721,#210722); +#210720 = CARTESIAN_POINT('',(149.5,-85.49999971069,-3.5E-02)); +#210721 = DIRECTION('',(0.,0.,-1.)); +#210722 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#210723 = ORIENTED_EDGE('',*,*,#210724,.F.); +#210724 = EDGE_CURVE('',#210725,#210716,#210727,.T.); +#210725 = VERTEX_POINT('',#210726); +#210726 = CARTESIAN_POINT('',(149.385195,-85.222836,0.)); +#210727 = LINE('',#210728,#210729); +#210728 = CARTESIAN_POINT('',(149.385195,-85.222836,0.)); +#210729 = VECTOR('',#210730,1.); +#210730 = DIRECTION('',(0.,0.,-1.)); +#210731 = ORIENTED_EDGE('',*,*,#210732,.F.); +#210732 = EDGE_CURVE('',#210693,#210725,#210733,.T.); +#210733 = CIRCLE('',#210734,0.299999850918); +#210734 = AXIS2_PLACEMENT_3D('',#210735,#210736,#210737); +#210735 = CARTESIAN_POINT('',(149.5,-85.49999971069,0.)); +#210736 = DIRECTION('',(0.,0.,-1.)); +#210737 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#210738 = CYLINDRICAL_SURFACE('',#210739,0.299999850918); +#210739 = AXIS2_PLACEMENT_3D('',#210740,#210741,#210742); +#210740 = CARTESIAN_POINT('',(149.5,-85.49999971069,0.)); +#210741 = DIRECTION('',(-0.,-0.,1.)); +#210742 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#210743 = ADVANCED_FACE('',(#210744),#210769,.F.); +#210744 = FACE_BOUND('',#210745,.F.); +#210745 = EDGE_LOOP('',(#210746,#210747,#210755,#210763)); +#210746 = ORIENTED_EDGE('',*,*,#210724,.T.); +#210747 = ORIENTED_EDGE('',*,*,#210748,.T.); +#210748 = EDGE_CURVE('',#210716,#210749,#210751,.T.); +#210749 = VERTEX_POINT('',#210750); +#210750 = CARTESIAN_POINT('',(149.4,-85.218869,-3.5E-02)); +#210751 = LINE('',#210752,#210753); +#210752 = CARTESIAN_POINT('',(149.385195,-85.222836,-3.5E-02)); +#210753 = VECTOR('',#210754,1.); +#210754 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#210755 = ORIENTED_EDGE('',*,*,#210756,.F.); +#210756 = EDGE_CURVE('',#210757,#210749,#210759,.T.); +#210757 = VERTEX_POINT('',#210758); +#210758 = CARTESIAN_POINT('',(149.4,-85.218869,0.)); +#210759 = LINE('',#210760,#210761); +#210760 = CARTESIAN_POINT('',(149.4,-85.218869,0.)); +#210761 = VECTOR('',#210762,1.); +#210762 = DIRECTION('',(0.,0.,-1.)); +#210763 = ORIENTED_EDGE('',*,*,#210764,.F.); +#210764 = EDGE_CURVE('',#210725,#210757,#210765,.T.); +#210765 = LINE('',#210766,#210767); +#210766 = CARTESIAN_POINT('',(149.385195,-85.222836,0.)); +#210767 = VECTOR('',#210768,1.); +#210768 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#210769 = PLANE('',#210770); +#210770 = AXIS2_PLACEMENT_3D('',#210771,#210772,#210773); +#210771 = CARTESIAN_POINT('',(149.385195,-85.222836,0.)); +#210772 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#210773 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#210774 = ADVANCED_FACE('',(#210775),#210800,.F.); +#210775 = FACE_BOUND('',#210776,.F.); +#210776 = EDGE_LOOP('',(#210777,#210778,#210786,#210794)); +#210777 = ORIENTED_EDGE('',*,*,#210756,.T.); +#210778 = ORIENTED_EDGE('',*,*,#210779,.T.); +#210779 = EDGE_CURVE('',#210749,#210780,#210782,.T.); +#210780 = VERTEX_POINT('',#210781); +#210781 = CARTESIAN_POINT('',(149.4,-75.552891,-3.5E-02)); +#210782 = LINE('',#210783,#210784); +#210783 = CARTESIAN_POINT('',(149.4,-85.218869,-3.5E-02)); +#210784 = VECTOR('',#210785,1.); +#210785 = DIRECTION('',(0.,1.,0.)); +#210786 = ORIENTED_EDGE('',*,*,#210787,.F.); +#210787 = EDGE_CURVE('',#210788,#210780,#210790,.T.); +#210788 = VERTEX_POINT('',#210789); +#210789 = CARTESIAN_POINT('',(149.4,-75.552891,0.)); +#210790 = LINE('',#210791,#210792); +#210791 = CARTESIAN_POINT('',(149.4,-75.552891,0.)); +#210792 = VECTOR('',#210793,1.); +#210793 = DIRECTION('',(0.,0.,-1.)); +#210794 = ORIENTED_EDGE('',*,*,#210795,.F.); +#210795 = EDGE_CURVE('',#210757,#210788,#210796,.T.); +#210796 = LINE('',#210797,#210798); +#210797 = CARTESIAN_POINT('',(149.4,-85.218869,0.)); +#210798 = VECTOR('',#210799,1.); +#210799 = DIRECTION('',(0.,1.,0.)); +#210800 = PLANE('',#210801); +#210801 = AXIS2_PLACEMENT_3D('',#210802,#210803,#210804); +#210802 = CARTESIAN_POINT('',(149.4,-85.218869,0.)); +#210803 = DIRECTION('',(1.,-0.,0.)); +#210804 = DIRECTION('',(0.,1.,0.)); +#210805 = ADVANCED_FACE('',(#210806),#210831,.F.); +#210806 = FACE_BOUND('',#210807,.F.); +#210807 = EDGE_LOOP('',(#210808,#210809,#210817,#210825)); +#210808 = ORIENTED_EDGE('',*,*,#210787,.T.); +#210809 = ORIENTED_EDGE('',*,*,#210810,.T.); +#210810 = EDGE_CURVE('',#210780,#210811,#210813,.T.); +#210811 = VERTEX_POINT('',#210812); +#210812 = CARTESIAN_POINT('',(149.272343,-75.425235,-3.5E-02)); +#210813 = LINE('',#210814,#210815); +#210814 = CARTESIAN_POINT('',(149.4,-75.552891,-3.5E-02)); +#210815 = VECTOR('',#210816,1.); +#210816 = DIRECTION('',(-0.707109550749,0.707104011613,0.)); +#210817 = ORIENTED_EDGE('',*,*,#210818,.F.); +#210818 = EDGE_CURVE('',#210819,#210811,#210821,.T.); +#210819 = VERTEX_POINT('',#210820); +#210820 = CARTESIAN_POINT('',(149.272343,-75.425235,0.)); +#210821 = LINE('',#210822,#210823); +#210822 = CARTESIAN_POINT('',(149.272343,-75.425235,0.)); +#210823 = VECTOR('',#210824,1.); +#210824 = DIRECTION('',(0.,0.,-1.)); +#210825 = ORIENTED_EDGE('',*,*,#210826,.F.); +#210826 = EDGE_CURVE('',#210788,#210819,#210827,.T.); +#210827 = LINE('',#210828,#210829); +#210828 = CARTESIAN_POINT('',(149.4,-75.552891,0.)); +#210829 = VECTOR('',#210830,1.); +#210830 = DIRECTION('',(-0.707109550749,0.707104011613,0.)); +#210831 = PLANE('',#210832); +#210832 = AXIS2_PLACEMENT_3D('',#210833,#210834,#210835); +#210833 = CARTESIAN_POINT('',(149.4,-75.552891,0.)); +#210834 = DIRECTION('',(0.707104011613,0.707109550749,0.)); +#210835 = DIRECTION('',(-0.707109550749,0.707104011613,0.)); +#210836 = ADVANCED_FACE('',(#210837),#210862,.F.); +#210837 = FACE_BOUND('',#210838,.F.); +#210838 = EDGE_LOOP('',(#210839,#210840,#210848,#210856)); +#210839 = ORIENTED_EDGE('',*,*,#210818,.T.); +#210840 = ORIENTED_EDGE('',*,*,#210841,.T.); +#210841 = EDGE_CURVE('',#210811,#210842,#210844,.T.); +#210842 = VERTEX_POINT('',#210843); +#210843 = CARTESIAN_POINT('',(149.25907,-75.432899,-3.5E-02)); +#210844 = LINE('',#210845,#210846); +#210845 = CARTESIAN_POINT('',(149.272343,-75.425235,-3.5E-02)); +#210846 = VECTOR('',#210847,1.); +#210847 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#210848 = ORIENTED_EDGE('',*,*,#210849,.F.); +#210849 = EDGE_CURVE('',#210850,#210842,#210852,.T.); +#210850 = VERTEX_POINT('',#210851); +#210851 = CARTESIAN_POINT('',(149.25907,-75.432899,0.)); +#210852 = LINE('',#210853,#210854); +#210853 = CARTESIAN_POINT('',(149.25907,-75.432899,0.)); +#210854 = VECTOR('',#210855,1.); +#210855 = DIRECTION('',(0.,0.,-1.)); +#210856 = ORIENTED_EDGE('',*,*,#210857,.F.); +#210857 = EDGE_CURVE('',#210819,#210850,#210858,.T.); +#210858 = LINE('',#210859,#210860); +#210859 = CARTESIAN_POINT('',(149.272343,-75.425235,0.)); +#210860 = VECTOR('',#210861,1.); +#210861 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#210862 = PLANE('',#210863); +#210863 = AXIS2_PLACEMENT_3D('',#210864,#210865,#210866); +#210864 = CARTESIAN_POINT('',(149.272343,-75.425235,0.)); +#210865 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#210866 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#210867 = ADVANCED_FACE('',(#210868),#210895,.T.); +#210868 = FACE_BOUND('',#210869,.F.); +#210869 = EDGE_LOOP('',(#210870,#210871,#210880,#210888)); +#210870 = ORIENTED_EDGE('',*,*,#210849,.T.); +#210871 = ORIENTED_EDGE('',*,*,#210872,.T.); +#210872 = EDGE_CURVE('',#210842,#210873,#210875,.T.); +#210873 = VERTEX_POINT('',#210874); +#210874 = CARTESIAN_POINT('',(149.421429,-75.27054,-3.5E-02)); +#210875 = CIRCLE('',#210876,0.300000118202); +#210876 = AXIS2_PLACEMENT_3D('',#210877,#210878,#210879); +#210877 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.5E-02)); +#210878 = DIRECTION('',(0.,0.,-1.)); +#210879 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#210880 = ORIENTED_EDGE('',*,*,#210881,.F.); +#210881 = EDGE_CURVE('',#210882,#210873,#210884,.T.); +#210882 = VERTEX_POINT('',#210883); +#210883 = CARTESIAN_POINT('',(149.421429,-75.27054,0.)); +#210884 = LINE('',#210885,#210886); +#210885 = CARTESIAN_POINT('',(149.421429,-75.27054,0.)); +#210886 = VECTOR('',#210887,1.); +#210887 = DIRECTION('',(0.,0.,-1.)); +#210888 = ORIENTED_EDGE('',*,*,#210889,.F.); +#210889 = EDGE_CURVE('',#210850,#210882,#210890,.T.); +#210890 = CIRCLE('',#210891,0.300000118202); +#210891 = AXIS2_PLACEMENT_3D('',#210892,#210893,#210894); +#210892 = CARTESIAN_POINT('',(149.144265,-75.155735,0.)); +#210893 = DIRECTION('',(0.,0.,-1.)); +#210894 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#210895 = CYLINDRICAL_SURFACE('',#210896,0.300000118202); +#210896 = AXIS2_PLACEMENT_3D('',#210897,#210898,#210899); +#210897 = CARTESIAN_POINT('',(149.144265,-75.155735,0.)); +#210898 = DIRECTION('',(-0.,-0.,1.)); +#210899 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#210900 = ADVANCED_FACE('',(#210901),#210917,.F.); +#210901 = FACE_BOUND('',#210902,.F.); +#210902 = EDGE_LOOP('',(#210903,#210904,#210910,#210911)); +#210903 = ORIENTED_EDGE('',*,*,#210881,.T.); +#210904 = ORIENTED_EDGE('',*,*,#210905,.T.); +#210905 = EDGE_CURVE('',#210873,#210584,#210906,.T.); +#210906 = LINE('',#210907,#210908); +#210907 = CARTESIAN_POINT('',(149.421429,-75.27054,-3.5E-02)); +#210908 = VECTOR('',#210909,1.); +#210909 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#210910 = ORIENTED_EDGE('',*,*,#210581,.F.); +#210911 = ORIENTED_EDGE('',*,*,#210912,.F.); +#210912 = EDGE_CURVE('',#210882,#210582,#210913,.T.); +#210913 = LINE('',#210914,#210915); +#210914 = CARTESIAN_POINT('',(149.421429,-75.27054,0.)); +#210915 = VECTOR('',#210916,1.); +#210916 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#210917 = PLANE('',#210918); +#210918 = AXIS2_PLACEMENT_3D('',#210919,#210920,#210921); +#210919 = CARTESIAN_POINT('',(149.421429,-75.27054,0.)); +#210920 = DIRECTION('',(-0.866001957081,0.500040608683,0.)); +#210921 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#210922 = ADVANCED_FACE('',(#210923),#210950,.F.); +#210923 = FACE_BOUND('',#210924,.F.); +#210924 = EDGE_LOOP('',(#210925,#210935,#210942,#210943)); +#210925 = ORIENTED_EDGE('',*,*,#210926,.T.); +#210926 = EDGE_CURVE('',#210927,#210929,#210931,.T.); +#210927 = VERTEX_POINT('',#210928); +#210928 = CARTESIAN_POINT('',(149.637255,-85.5,0.)); +#210929 = VERTEX_POINT('',#210930); +#210930 = CARTESIAN_POINT('',(149.637255,-85.5,-3.5E-02)); +#210931 = LINE('',#210932,#210933); +#210932 = CARTESIAN_POINT('',(149.637255,-85.5,0.)); +#210933 = VECTOR('',#210934,1.); +#210934 = DIRECTION('',(0.,0.,-1.)); +#210935 = ORIENTED_EDGE('',*,*,#210936,.T.); +#210936 = EDGE_CURVE('',#210929,#210929,#210937,.T.); +#210937 = CIRCLE('',#210938,0.137255); +#210938 = AXIS2_PLACEMENT_3D('',#210939,#210940,#210941); +#210939 = CARTESIAN_POINT('',(149.5,-85.5,-3.5E-02)); +#210940 = DIRECTION('',(0.,0.,1.)); +#210941 = DIRECTION('',(1.,0.,-0.)); +#210942 = ORIENTED_EDGE('',*,*,#210926,.F.); +#210943 = ORIENTED_EDGE('',*,*,#210944,.F.); +#210944 = EDGE_CURVE('',#210927,#210927,#210945,.T.); +#210945 = CIRCLE('',#210946,0.137255); +#210946 = AXIS2_PLACEMENT_3D('',#210947,#210948,#210949); +#210947 = CARTESIAN_POINT('',(149.5,-85.5,0.)); +#210948 = DIRECTION('',(0.,0.,1.)); +#210949 = DIRECTION('',(1.,0.,-0.)); +#210950 = CYLINDRICAL_SURFACE('',#210951,0.137255); +#210951 = AXIS2_PLACEMENT_3D('',#210952,#210953,#210954); +#210952 = CARTESIAN_POINT('',(149.5,-85.5,0.)); +#210953 = DIRECTION('',(0.,0.,1.)); +#210954 = DIRECTION('',(1.,0.,-0.)); +#210955 = ADVANCED_FACE('',(#210956),#210983,.F.); +#210956 = FACE_BOUND('',#210957,.F.); +#210957 = EDGE_LOOP('',(#210958,#210968,#210975,#210976)); +#210958 = ORIENTED_EDGE('',*,*,#210959,.T.); +#210959 = EDGE_CURVE('',#210960,#210962,#210964,.T.); +#210960 = VERTEX_POINT('',#210961); +#210961 = CARTESIAN_POINT('',(149.28152,-75.155735,0.)); +#210962 = VERTEX_POINT('',#210963); +#210963 = CARTESIAN_POINT('',(149.28152,-75.155735,-3.5E-02)); +#210964 = LINE('',#210965,#210966); +#210965 = CARTESIAN_POINT('',(149.28152,-75.155735,0.)); +#210966 = VECTOR('',#210967,1.); +#210967 = DIRECTION('',(0.,0.,-1.)); +#210968 = ORIENTED_EDGE('',*,*,#210969,.T.); +#210969 = EDGE_CURVE('',#210962,#210962,#210970,.T.); +#210970 = CIRCLE('',#210971,0.137255); +#210971 = AXIS2_PLACEMENT_3D('',#210972,#210973,#210974); +#210972 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.5E-02)); +#210973 = DIRECTION('',(0.,0.,1.)); +#210974 = DIRECTION('',(1.,0.,-0.)); +#210975 = ORIENTED_EDGE('',*,*,#210959,.F.); +#210976 = ORIENTED_EDGE('',*,*,#210977,.F.); +#210977 = EDGE_CURVE('',#210960,#210960,#210978,.T.); +#210978 = CIRCLE('',#210979,0.137255); +#210979 = AXIS2_PLACEMENT_3D('',#210980,#210981,#210982); +#210980 = CARTESIAN_POINT('',(149.144265,-75.155735,0.)); +#210981 = DIRECTION('',(0.,0.,1.)); +#210982 = DIRECTION('',(1.,0.,-0.)); +#210983 = CYLINDRICAL_SURFACE('',#210984,0.137255); +#210984 = AXIS2_PLACEMENT_3D('',#210985,#210986,#210987); +#210985 = CARTESIAN_POINT('',(149.144265,-75.155735,0.)); +#210986 = DIRECTION('',(0.,0.,1.)); +#210987 = DIRECTION('',(1.,0.,-0.)); +#210988 = ADVANCED_FACE('',(#210989,#211002,#211005),#211008,.F.); +#210989 = FACE_BOUND('',#210990,.F.); +#210990 = EDGE_LOOP('',(#210991,#210992,#210993,#210994,#210995,#210996, + #210997,#210998,#210999,#211000,#211001)); +#210991 = ORIENTED_EDGE('',*,*,#210607,.T.); +#210992 = ORIENTED_EDGE('',*,*,#210638,.T.); +#210993 = ORIENTED_EDGE('',*,*,#210669,.T.); +#210994 = ORIENTED_EDGE('',*,*,#210700,.T.); +#210995 = ORIENTED_EDGE('',*,*,#210732,.T.); +#210996 = ORIENTED_EDGE('',*,*,#210764,.T.); +#210997 = ORIENTED_EDGE('',*,*,#210795,.T.); +#210998 = ORIENTED_EDGE('',*,*,#210826,.T.); +#210999 = ORIENTED_EDGE('',*,*,#210857,.T.); +#211000 = ORIENTED_EDGE('',*,*,#210889,.T.); +#211001 = ORIENTED_EDGE('',*,*,#210912,.T.); +#211002 = FACE_BOUND('',#211003,.F.); +#211003 = EDGE_LOOP('',(#211004)); +#211004 = ORIENTED_EDGE('',*,*,#210944,.T.); +#211005 = FACE_BOUND('',#211006,.F.); +#211006 = EDGE_LOOP('',(#211007)); +#211007 = ORIENTED_EDGE('',*,*,#210977,.T.); +#211008 = PLANE('',#211009); +#211009 = AXIS2_PLACEMENT_3D('',#211010,#211011,#211012); +#211010 = CARTESIAN_POINT('',(0.,0.,0.)); +#211011 = DIRECTION('',(-0.,-0.,-1.)); +#211012 = DIRECTION('',(-1.,0.,0.)); +#211013 = ADVANCED_FACE('',(#211014,#211027,#211030),#211033,.T.); +#211014 = FACE_BOUND('',#211015,.T.); +#211015 = EDGE_LOOP('',(#211016,#211017,#211018,#211019,#211020,#211021, + #211022,#211023,#211024,#211025,#211026)); +#211016 = ORIENTED_EDGE('',*,*,#210591,.T.); +#211017 = ORIENTED_EDGE('',*,*,#210622,.T.); +#211018 = ORIENTED_EDGE('',*,*,#210653,.T.); +#211019 = ORIENTED_EDGE('',*,*,#210684,.T.); +#211020 = ORIENTED_EDGE('',*,*,#210715,.T.); +#211021 = ORIENTED_EDGE('',*,*,#210748,.T.); +#211022 = ORIENTED_EDGE('',*,*,#210779,.T.); +#211023 = ORIENTED_EDGE('',*,*,#210810,.T.); +#211024 = ORIENTED_EDGE('',*,*,#210841,.T.); +#211025 = ORIENTED_EDGE('',*,*,#210872,.T.); +#211026 = ORIENTED_EDGE('',*,*,#210905,.T.); +#211027 = FACE_BOUND('',#211028,.T.); +#211028 = EDGE_LOOP('',(#211029)); +#211029 = ORIENTED_EDGE('',*,*,#210936,.T.); +#211030 = FACE_BOUND('',#211031,.T.); +#211031 = EDGE_LOOP('',(#211032)); +#211032 = ORIENTED_EDGE('',*,*,#210969,.T.); +#211033 = PLANE('',#211034); +#211034 = AXIS2_PLACEMENT_3D('',#211035,#211036,#211037); +#211035 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#211036 = DIRECTION('',(-0.,-0.,-1.)); +#211037 = DIRECTION('',(-1.,0.,0.)); +#211038 = MANIFOLD_SOLID_BREP('',#211039); +#211039 = CLOSED_SHELL('',(#211040,#211080,#211111,#211142,#211173, + #211204,#211235,#211266,#211297,#211328,#211359,#211390,#211423, + #211454,#211485,#211516,#211547,#211578,#211609,#211640,#211671, + #211702,#211733,#211766,#211788,#211821,#211856)); +#211040 = ADVANCED_FACE('',(#211041),#211075,.T.); +#211041 = FACE_BOUND('',#211042,.T.); +#211042 = EDGE_LOOP('',(#211043,#211053,#211061,#211069)); +#211043 = ORIENTED_EDGE('',*,*,#211044,.T.); +#211044 = EDGE_CURVE('',#211045,#211047,#211049,.T.); +#211045 = VERTEX_POINT('',#211046); +#211046 = CARTESIAN_POINT('',(150.6,-85.78113,1.51)); +#211047 = VERTEX_POINT('',#211048); +#211048 = CARTESIAN_POINT('',(150.6,-85.78113,1.545)); +#211049 = LINE('',#211050,#211051); +#211050 = CARTESIAN_POINT('',(150.6,-85.78113,1.51)); +#211051 = VECTOR('',#211052,1.); +#211052 = DIRECTION('',(0.,0.,1.)); +#211053 = ORIENTED_EDGE('',*,*,#211054,.T.); +#211054 = EDGE_CURVE('',#211047,#211055,#211057,.T.); +#211055 = VERTEX_POINT('',#211056); +#211056 = CARTESIAN_POINT('',(150.6,-87.433578,1.545)); +#211057 = LINE('',#211058,#211059); +#211058 = CARTESIAN_POINT('',(150.6,-85.78113,1.545)); +#211059 = VECTOR('',#211060,1.); +#211060 = DIRECTION('',(0.,-1.,0.)); +#211061 = ORIENTED_EDGE('',*,*,#211062,.F.); +#211062 = EDGE_CURVE('',#211063,#211055,#211065,.T.); +#211063 = VERTEX_POINT('',#211064); +#211064 = CARTESIAN_POINT('',(150.6,-87.433578,1.51)); +#211065 = LINE('',#211066,#211067); +#211066 = CARTESIAN_POINT('',(150.6,-87.433578,1.51)); +#211067 = VECTOR('',#211068,1.); +#211068 = DIRECTION('',(0.,0.,1.)); +#211069 = ORIENTED_EDGE('',*,*,#211070,.F.); +#211070 = EDGE_CURVE('',#211045,#211063,#211071,.T.); +#211071 = LINE('',#211072,#211073); +#211072 = CARTESIAN_POINT('',(150.6,-85.78113,1.51)); +#211073 = VECTOR('',#211074,1.); +#211074 = DIRECTION('',(0.,-1.,0.)); +#211075 = PLANE('',#211076); +#211076 = AXIS2_PLACEMENT_3D('',#211077,#211078,#211079); +#211077 = CARTESIAN_POINT('',(150.6,-85.78113,1.51)); +#211078 = DIRECTION('',(1.,0.,-0.)); +#211079 = DIRECTION('',(0.,-1.,0.)); +#211080 = ADVANCED_FACE('',(#211081),#211106,.T.); +#211081 = FACE_BOUND('',#211082,.T.); +#211082 = EDGE_LOOP('',(#211083,#211084,#211092,#211100)); +#211083 = ORIENTED_EDGE('',*,*,#211062,.T.); +#211084 = ORIENTED_EDGE('',*,*,#211085,.T.); +#211085 = EDGE_CURVE('',#211055,#211086,#211088,.T.); +#211086 = VERTEX_POINT('',#211087); +#211087 = CARTESIAN_POINT('',(152.341421,-89.175,1.545)); +#211088 = LINE('',#211089,#211090); +#211089 = CARTESIAN_POINT('',(150.6,-87.433578,1.545)); +#211090 = VECTOR('',#211091,1.); +#211091 = DIRECTION('',(0.707106578161,-0.707106984212,0.)); +#211092 = ORIENTED_EDGE('',*,*,#211093,.F.); +#211093 = EDGE_CURVE('',#211094,#211086,#211096,.T.); +#211094 = VERTEX_POINT('',#211095); +#211095 = CARTESIAN_POINT('',(152.341421,-89.175,1.51)); +#211096 = LINE('',#211097,#211098); +#211097 = CARTESIAN_POINT('',(152.341421,-89.175,1.51)); +#211098 = VECTOR('',#211099,1.); +#211099 = DIRECTION('',(0.,0.,1.)); +#211100 = ORIENTED_EDGE('',*,*,#211101,.F.); +#211101 = EDGE_CURVE('',#211063,#211094,#211102,.T.); +#211102 = LINE('',#211103,#211104); +#211103 = CARTESIAN_POINT('',(150.6,-87.433578,1.51)); +#211104 = VECTOR('',#211105,1.); +#211105 = DIRECTION('',(0.707106578161,-0.707106984212,0.)); +#211106 = PLANE('',#211107); +#211107 = AXIS2_PLACEMENT_3D('',#211108,#211109,#211110); +#211108 = CARTESIAN_POINT('',(150.6,-87.433578,1.51)); +#211109 = DIRECTION('',(0.707106984212,0.707106578161,-0.)); +#211110 = DIRECTION('',(0.707106578161,-0.707106984212,0.)); +#211111 = ADVANCED_FACE('',(#211112),#211137,.T.); +#211112 = FACE_BOUND('',#211113,.T.); +#211113 = EDGE_LOOP('',(#211114,#211115,#211123,#211131)); +#211114 = ORIENTED_EDGE('',*,*,#211093,.T.); +#211115 = ORIENTED_EDGE('',*,*,#211116,.T.); +#211116 = EDGE_CURVE('',#211086,#211117,#211119,.T.); +#211117 = VERTEX_POINT('',#211118); +#211118 = CARTESIAN_POINT('',(153.219509,-89.176921,1.545)); +#211119 = LINE('',#211120,#211121); +#211120 = CARTESIAN_POINT('',(152.341421,-89.175,1.545)); +#211121 = VECTOR('',#211122,1.); +#211122 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#211123 = ORIENTED_EDGE('',*,*,#211124,.F.); +#211124 = EDGE_CURVE('',#211125,#211117,#211127,.T.); +#211125 = VERTEX_POINT('',#211126); +#211126 = CARTESIAN_POINT('',(153.219509,-89.176921,1.51)); +#211127 = LINE('',#211128,#211129); +#211128 = CARTESIAN_POINT('',(153.219509,-89.176921,1.51)); +#211129 = VECTOR('',#211130,1.); +#211130 = DIRECTION('',(0.,0.,1.)); +#211131 = ORIENTED_EDGE('',*,*,#211132,.F.); +#211132 = EDGE_CURVE('',#211094,#211125,#211133,.T.); +#211133 = LINE('',#211134,#211135); +#211134 = CARTESIAN_POINT('',(152.341421,-89.175,1.51)); +#211135 = VECTOR('',#211136,1.); +#211136 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#211137 = PLANE('',#211138); +#211138 = AXIS2_PLACEMENT_3D('',#211139,#211140,#211141); +#211139 = CARTESIAN_POINT('',(152.341421,-89.175,1.51)); +#211140 = DIRECTION('',(2.187702602696E-03,0.999997606976,-0.)); +#211141 = DIRECTION('',(0.999997606976,-2.187702602696E-03,0.)); +#211142 = ADVANCED_FACE('',(#211143),#211168,.T.); +#211143 = FACE_BOUND('',#211144,.T.); +#211144 = EDGE_LOOP('',(#211145,#211146,#211154,#211162)); +#211145 = ORIENTED_EDGE('',*,*,#211124,.T.); +#211146 = ORIENTED_EDGE('',*,*,#211147,.T.); +#211147 = EDGE_CURVE('',#211117,#211148,#211150,.T.); +#211148 = VERTEX_POINT('',#211149); +#211149 = CARTESIAN_POINT('',(153.255557,-89.191853,1.545)); +#211150 = LINE('',#211151,#211152); +#211151 = CARTESIAN_POINT('',(153.219509,-89.176921,1.545)); +#211152 = VECTOR('',#211153,1.); +#211153 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#211154 = ORIENTED_EDGE('',*,*,#211155,.F.); +#211155 = EDGE_CURVE('',#211156,#211148,#211158,.T.); +#211156 = VERTEX_POINT('',#211157); +#211157 = CARTESIAN_POINT('',(153.255557,-89.191853,1.51)); +#211158 = LINE('',#211159,#211160); +#211159 = CARTESIAN_POINT('',(153.255557,-89.191853,1.51)); +#211160 = VECTOR('',#211161,1.); +#211161 = DIRECTION('',(0.,0.,1.)); +#211162 = ORIENTED_EDGE('',*,*,#211163,.F.); +#211163 = EDGE_CURVE('',#211125,#211156,#211164,.T.); +#211164 = LINE('',#211165,#211166); +#211165 = CARTESIAN_POINT('',(153.219509,-89.176921,1.51)); +#211166 = VECTOR('',#211167,1.); +#211167 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#211168 = PLANE('',#211169); +#211169 = AXIS2_PLACEMENT_3D('',#211170,#211171,#211172); +#211170 = CARTESIAN_POINT('',(153.219509,-89.176921,1.51)); +#211171 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#211172 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#211173 = ADVANCED_FACE('',(#211174),#211199,.T.); +#211174 = FACE_BOUND('',#211175,.T.); +#211175 = EDGE_LOOP('',(#211176,#211177,#211185,#211193)); +#211176 = ORIENTED_EDGE('',*,*,#211155,.T.); +#211177 = ORIENTED_EDGE('',*,*,#211178,.T.); +#211178 = EDGE_CURVE('',#211148,#211179,#211181,.T.); +#211179 = VERTEX_POINT('',#211180); +#211180 = CARTESIAN_POINT('',(153.583147,-89.519443,1.545)); +#211181 = LINE('',#211182,#211183); +#211182 = CARTESIAN_POINT('',(153.255557,-89.191853,1.545)); +#211183 = VECTOR('',#211184,1.); +#211184 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#211185 = ORIENTED_EDGE('',*,*,#211186,.F.); +#211186 = EDGE_CURVE('',#211187,#211179,#211189,.T.); +#211187 = VERTEX_POINT('',#211188); +#211188 = CARTESIAN_POINT('',(153.583147,-89.519443,1.51)); +#211189 = LINE('',#211190,#211191); +#211190 = CARTESIAN_POINT('',(153.583147,-89.519443,1.51)); +#211191 = VECTOR('',#211192,1.); +#211192 = DIRECTION('',(0.,0.,1.)); +#211193 = ORIENTED_EDGE('',*,*,#211194,.F.); +#211194 = EDGE_CURVE('',#211156,#211187,#211195,.T.); +#211195 = LINE('',#211196,#211197); +#211196 = CARTESIAN_POINT('',(153.255557,-89.191853,1.51)); +#211197 = VECTOR('',#211198,1.); +#211198 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#211199 = PLANE('',#211200); +#211200 = AXIS2_PLACEMENT_3D('',#211201,#211202,#211203); +#211201 = CARTESIAN_POINT('',(153.255557,-89.191853,1.51)); +#211202 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#211203 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#211204 = ADVANCED_FACE('',(#211205),#211230,.T.); +#211205 = FACE_BOUND('',#211206,.T.); +#211206 = EDGE_LOOP('',(#211207,#211208,#211216,#211224)); +#211207 = ORIENTED_EDGE('',*,*,#211186,.T.); +#211208 = ORIENTED_EDGE('',*,*,#211209,.T.); +#211209 = EDGE_CURVE('',#211179,#211210,#211212,.T.); +#211210 = VERTEX_POINT('',#211211); +#211211 = CARTESIAN_POINT('',(153.598079,-89.555491,1.545)); +#211212 = LINE('',#211213,#211214); +#211213 = CARTESIAN_POINT('',(153.583147,-89.519443,1.545)); +#211214 = VECTOR('',#211215,1.); +#211215 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#211216 = ORIENTED_EDGE('',*,*,#211217,.F.); +#211217 = EDGE_CURVE('',#211218,#211210,#211220,.T.); +#211218 = VERTEX_POINT('',#211219); +#211219 = CARTESIAN_POINT('',(153.598079,-89.555491,1.51)); +#211220 = LINE('',#211221,#211222); +#211221 = CARTESIAN_POINT('',(153.598079,-89.555491,1.51)); +#211222 = VECTOR('',#211223,1.); +#211223 = DIRECTION('',(0.,0.,1.)); +#211224 = ORIENTED_EDGE('',*,*,#211225,.F.); +#211225 = EDGE_CURVE('',#211187,#211218,#211226,.T.); +#211226 = LINE('',#211227,#211228); +#211227 = CARTESIAN_POINT('',(153.583147,-89.519443,1.51)); +#211228 = VECTOR('',#211229,1.); +#211229 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#211230 = PLANE('',#211231); +#211231 = AXIS2_PLACEMENT_3D('',#211232,#211233,#211234); +#211232 = CARTESIAN_POINT('',(153.583147,-89.519443,1.51)); +#211233 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#211234 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#211235 = ADVANCED_FACE('',(#211236),#211261,.T.); +#211236 = FACE_BOUND('',#211237,.T.); +#211237 = EDGE_LOOP('',(#211238,#211239,#211247,#211255)); +#211238 = ORIENTED_EDGE('',*,*,#211217,.T.); +#211239 = ORIENTED_EDGE('',*,*,#211240,.T.); +#211240 = EDGE_CURVE('',#211210,#211241,#211243,.T.); +#211241 = VERTEX_POINT('',#211242); +#211242 = CARTESIAN_POINT('',(153.598079,-91.019509,1.545)); +#211243 = LINE('',#211244,#211245); +#211244 = CARTESIAN_POINT('',(153.598079,-89.555491,1.545)); +#211245 = VECTOR('',#211246,1.); +#211246 = DIRECTION('',(0.,-1.,0.)); +#211247 = ORIENTED_EDGE('',*,*,#211248,.F.); +#211248 = EDGE_CURVE('',#211249,#211241,#211251,.T.); +#211249 = VERTEX_POINT('',#211250); +#211250 = CARTESIAN_POINT('',(153.598079,-91.019509,1.51)); +#211251 = LINE('',#211252,#211253); +#211252 = CARTESIAN_POINT('',(153.598079,-91.019509,1.51)); +#211253 = VECTOR('',#211254,1.); +#211254 = DIRECTION('',(0.,0.,1.)); +#211255 = ORIENTED_EDGE('',*,*,#211256,.F.); +#211256 = EDGE_CURVE('',#211218,#211249,#211257,.T.); +#211257 = LINE('',#211258,#211259); +#211258 = CARTESIAN_POINT('',(153.598079,-89.555491,1.51)); +#211259 = VECTOR('',#211260,1.); +#211260 = DIRECTION('',(0.,-1.,0.)); +#211261 = PLANE('',#211262); +#211262 = AXIS2_PLACEMENT_3D('',#211263,#211264,#211265); +#211263 = CARTESIAN_POINT('',(153.598079,-89.555491,1.51)); +#211264 = DIRECTION('',(1.,0.,-0.)); +#211265 = DIRECTION('',(0.,-1.,0.)); +#211266 = ADVANCED_FACE('',(#211267),#211292,.T.); +#211267 = FACE_BOUND('',#211268,.T.); +#211268 = EDGE_LOOP('',(#211269,#211270,#211278,#211286)); +#211269 = ORIENTED_EDGE('',*,*,#211248,.T.); +#211270 = ORIENTED_EDGE('',*,*,#211271,.T.); +#211271 = EDGE_CURVE('',#211241,#211272,#211274,.T.); +#211272 = VERTEX_POINT('',#211273); +#211273 = CARTESIAN_POINT('',(153.583147,-91.055557,1.545)); +#211274 = LINE('',#211275,#211276); +#211275 = CARTESIAN_POINT('',(153.598079,-91.019509,1.545)); +#211276 = VECTOR('',#211277,1.); +#211277 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#211278 = ORIENTED_EDGE('',*,*,#211279,.F.); +#211279 = EDGE_CURVE('',#211280,#211272,#211282,.T.); +#211280 = VERTEX_POINT('',#211281); +#211281 = CARTESIAN_POINT('',(153.583147,-91.055557,1.51)); +#211282 = LINE('',#211283,#211284); +#211283 = CARTESIAN_POINT('',(153.583147,-91.055557,1.51)); +#211284 = VECTOR('',#211285,1.); +#211285 = DIRECTION('',(0.,0.,1.)); +#211286 = ORIENTED_EDGE('',*,*,#211287,.F.); +#211287 = EDGE_CURVE('',#211249,#211280,#211288,.T.); +#211288 = LINE('',#211289,#211290); +#211289 = CARTESIAN_POINT('',(153.598079,-91.019509,1.51)); +#211290 = VECTOR('',#211291,1.); +#211291 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#211292 = PLANE('',#211293); +#211293 = AXIS2_PLACEMENT_3D('',#211294,#211295,#211296); +#211294 = CARTESIAN_POINT('',(153.598079,-91.019509,1.51)); +#211295 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#211296 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#211297 = ADVANCED_FACE('',(#211298),#211323,.T.); +#211298 = FACE_BOUND('',#211299,.T.); +#211299 = EDGE_LOOP('',(#211300,#211301,#211309,#211317)); +#211300 = ORIENTED_EDGE('',*,*,#211279,.T.); +#211301 = ORIENTED_EDGE('',*,*,#211302,.T.); +#211302 = EDGE_CURVE('',#211272,#211303,#211305,.T.); +#211303 = VERTEX_POINT('',#211304); +#211304 = CARTESIAN_POINT('',(152.830557,-91.808147,1.545)); +#211305 = LINE('',#211306,#211307); +#211306 = CARTESIAN_POINT('',(153.583147,-91.055557,1.545)); +#211307 = VECTOR('',#211308,1.); +#211308 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#211309 = ORIENTED_EDGE('',*,*,#211310,.F.); +#211310 = EDGE_CURVE('',#211311,#211303,#211313,.T.); +#211311 = VERTEX_POINT('',#211312); +#211312 = CARTESIAN_POINT('',(152.830557,-91.808147,1.51)); +#211313 = LINE('',#211314,#211315); +#211314 = CARTESIAN_POINT('',(152.830557,-91.808147,1.51)); +#211315 = VECTOR('',#211316,1.); +#211316 = DIRECTION('',(0.,0.,1.)); +#211317 = ORIENTED_EDGE('',*,*,#211318,.F.); +#211318 = EDGE_CURVE('',#211280,#211311,#211319,.T.); +#211319 = LINE('',#211320,#211321); +#211320 = CARTESIAN_POINT('',(153.583147,-91.055557,1.51)); +#211321 = VECTOR('',#211322,1.); +#211322 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#211323 = PLANE('',#211324); +#211324 = AXIS2_PLACEMENT_3D('',#211325,#211326,#211327); +#211325 = CARTESIAN_POINT('',(153.583147,-91.055557,1.51)); +#211326 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#211327 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#211328 = ADVANCED_FACE('',(#211329),#211354,.T.); +#211329 = FACE_BOUND('',#211330,.T.); +#211330 = EDGE_LOOP('',(#211331,#211332,#211340,#211348)); +#211331 = ORIENTED_EDGE('',*,*,#211310,.T.); +#211332 = ORIENTED_EDGE('',*,*,#211333,.T.); +#211333 = EDGE_CURVE('',#211303,#211334,#211336,.T.); +#211334 = VERTEX_POINT('',#211335); +#211335 = CARTESIAN_POINT('',(152.794509,-91.823079,1.545)); +#211336 = LINE('',#211337,#211338); +#211337 = CARTESIAN_POINT('',(152.830557,-91.808147,1.545)); +#211338 = VECTOR('',#211339,1.); +#211339 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#211340 = ORIENTED_EDGE('',*,*,#211341,.F.); +#211341 = EDGE_CURVE('',#211342,#211334,#211344,.T.); +#211342 = VERTEX_POINT('',#211343); +#211343 = CARTESIAN_POINT('',(152.794509,-91.823079,1.51)); +#211344 = LINE('',#211345,#211346); +#211345 = CARTESIAN_POINT('',(152.794509,-91.823079,1.51)); +#211346 = VECTOR('',#211347,1.); +#211347 = DIRECTION('',(0.,0.,1.)); +#211348 = ORIENTED_EDGE('',*,*,#211349,.F.); +#211349 = EDGE_CURVE('',#211311,#211342,#211350,.T.); +#211350 = LINE('',#211351,#211352); +#211351 = CARTESIAN_POINT('',(152.830557,-91.808147,1.51)); +#211352 = VECTOR('',#211353,1.); +#211353 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#211354 = PLANE('',#211355); +#211355 = AXIS2_PLACEMENT_3D('',#211356,#211357,#211358); +#211356 = CARTESIAN_POINT('',(152.830557,-91.808147,1.51)); +#211357 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#211358 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#211359 = ADVANCED_FACE('',(#211360),#211385,.T.); +#211360 = FACE_BOUND('',#211361,.T.); +#211361 = EDGE_LOOP('',(#211362,#211363,#211371,#211379)); +#211362 = ORIENTED_EDGE('',*,*,#211341,.T.); +#211363 = ORIENTED_EDGE('',*,*,#211364,.T.); +#211364 = EDGE_CURVE('',#211334,#211365,#211367,.T.); +#211365 = VERTEX_POINT('',#211366); +#211366 = CARTESIAN_POINT('',(152.280491,-91.823079,1.545)); +#211367 = LINE('',#211368,#211369); +#211368 = CARTESIAN_POINT('',(152.794509,-91.823079,1.545)); +#211369 = VECTOR('',#211370,1.); +#211370 = DIRECTION('',(-1.,0.,0.)); +#211371 = ORIENTED_EDGE('',*,*,#211372,.F.); +#211372 = EDGE_CURVE('',#211373,#211365,#211375,.T.); +#211373 = VERTEX_POINT('',#211374); +#211374 = CARTESIAN_POINT('',(152.280491,-91.823079,1.51)); +#211375 = LINE('',#211376,#211377); +#211376 = CARTESIAN_POINT('',(152.280491,-91.823079,1.51)); +#211377 = VECTOR('',#211378,1.); +#211378 = DIRECTION('',(0.,0.,1.)); +#211379 = ORIENTED_EDGE('',*,*,#211380,.F.); +#211380 = EDGE_CURVE('',#211342,#211373,#211381,.T.); +#211381 = LINE('',#211382,#211383); +#211382 = CARTESIAN_POINT('',(152.794509,-91.823079,1.51)); +#211383 = VECTOR('',#211384,1.); +#211384 = DIRECTION('',(-1.,0.,0.)); +#211385 = PLANE('',#211386); +#211386 = AXIS2_PLACEMENT_3D('',#211387,#211388,#211389); +#211387 = CARTESIAN_POINT('',(152.794509,-91.823079,1.51)); +#211388 = DIRECTION('',(0.,-1.,0.)); +#211389 = DIRECTION('',(-1.,0.,0.)); +#211390 = ADVANCED_FACE('',(#211391),#211418,.T.); +#211391 = FACE_BOUND('',#211392,.T.); +#211392 = EDGE_LOOP('',(#211393,#211394,#211403,#211411)); +#211393 = ORIENTED_EDGE('',*,*,#211372,.T.); +#211394 = ORIENTED_EDGE('',*,*,#211395,.T.); +#211395 = EDGE_CURVE('',#211365,#211396,#211398,.T.); +#211396 = VERTEX_POINT('',#211397); +#211397 = CARTESIAN_POINT('',(152.280491,-91.626921,1.545)); +#211398 = CIRCLE('',#211399,0.100000456609); +#211399 = AXIS2_PLACEMENT_3D('',#211400,#211401,#211402); +#211400 = CARTESIAN_POINT('',(152.3,-91.725,1.545)); +#211401 = DIRECTION('',(0.,0.,-1.)); +#211402 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#211403 = ORIENTED_EDGE('',*,*,#211404,.F.); +#211404 = EDGE_CURVE('',#211405,#211396,#211407,.T.); +#211405 = VERTEX_POINT('',#211406); +#211406 = CARTESIAN_POINT('',(152.280491,-91.626921,1.51)); +#211407 = LINE('',#211408,#211409); +#211408 = CARTESIAN_POINT('',(152.280491,-91.626921,1.51)); +#211409 = VECTOR('',#211410,1.); +#211410 = DIRECTION('',(0.,0.,1.)); +#211411 = ORIENTED_EDGE('',*,*,#211412,.F.); +#211412 = EDGE_CURVE('',#211373,#211405,#211413,.T.); +#211413 = CIRCLE('',#211414,0.100000456609); +#211414 = AXIS2_PLACEMENT_3D('',#211415,#211416,#211417); +#211415 = CARTESIAN_POINT('',(152.3,-91.725,1.51)); +#211416 = DIRECTION('',(0.,0.,-1.)); +#211417 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#211418 = CYLINDRICAL_SURFACE('',#211419,0.100000456609); +#211419 = AXIS2_PLACEMENT_3D('',#211420,#211421,#211422); +#211420 = CARTESIAN_POINT('',(152.3,-91.725,1.51)); +#211421 = DIRECTION('',(0.,0.,-1.)); +#211422 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#211423 = ADVANCED_FACE('',(#211424),#211449,.T.); +#211424 = FACE_BOUND('',#211425,.T.); +#211425 = EDGE_LOOP('',(#211426,#211427,#211435,#211443)); +#211426 = ORIENTED_EDGE('',*,*,#211404,.T.); +#211427 = ORIENTED_EDGE('',*,*,#211428,.T.); +#211428 = EDGE_CURVE('',#211396,#211429,#211431,.T.); +#211429 = VERTEX_POINT('',#211430); +#211430 = CARTESIAN_POINT('',(152.733578,-91.625,1.545)); +#211431 = LINE('',#211432,#211433); +#211432 = CARTESIAN_POINT('',(152.280491,-91.626921,1.545)); +#211433 = VECTOR('',#211434,1.); +#211434 = DIRECTION('',(0.999991012153,4.239765727866E-03,0.)); +#211435 = ORIENTED_EDGE('',*,*,#211436,.F.); +#211436 = EDGE_CURVE('',#211437,#211429,#211439,.T.); +#211437 = VERTEX_POINT('',#211438); +#211438 = CARTESIAN_POINT('',(152.733578,-91.625,1.51)); +#211439 = LINE('',#211440,#211441); +#211440 = CARTESIAN_POINT('',(152.733578,-91.625,1.51)); +#211441 = VECTOR('',#211442,1.); +#211442 = DIRECTION('',(0.,0.,1.)); +#211443 = ORIENTED_EDGE('',*,*,#211444,.F.); +#211444 = EDGE_CURVE('',#211405,#211437,#211445,.T.); +#211445 = LINE('',#211446,#211447); +#211446 = CARTESIAN_POINT('',(152.280491,-91.626921,1.51)); +#211447 = VECTOR('',#211448,1.); +#211448 = DIRECTION('',(0.999991012153,4.239765727866E-03,0.)); +#211449 = PLANE('',#211450); +#211450 = AXIS2_PLACEMENT_3D('',#211451,#211452,#211453); +#211451 = CARTESIAN_POINT('',(152.280491,-91.626921,1.51)); +#211452 = DIRECTION('',(-4.239765727866E-03,0.999991012153,0.)); +#211453 = DIRECTION('',(0.999991012153,4.239765727866E-03,0.)); +#211454 = ADVANCED_FACE('',(#211455),#211480,.T.); +#211455 = FACE_BOUND('',#211456,.T.); +#211456 = EDGE_LOOP('',(#211457,#211458,#211466,#211474)); +#211457 = ORIENTED_EDGE('',*,*,#211436,.T.); +#211458 = ORIENTED_EDGE('',*,*,#211459,.T.); +#211459 = EDGE_CURVE('',#211429,#211460,#211462,.T.); +#211460 = VERTEX_POINT('',#211461); +#211461 = CARTESIAN_POINT('',(153.4,-90.958578,1.545)); +#211462 = LINE('',#211463,#211464); +#211463 = CARTESIAN_POINT('',(152.733578,-91.625,1.545)); +#211464 = VECTOR('',#211465,1.); +#211465 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#211466 = ORIENTED_EDGE('',*,*,#211467,.F.); +#211467 = EDGE_CURVE('',#211468,#211460,#211470,.T.); +#211468 = VERTEX_POINT('',#211469); +#211469 = CARTESIAN_POINT('',(153.4,-90.958578,1.51)); +#211470 = LINE('',#211471,#211472); +#211471 = CARTESIAN_POINT('',(153.4,-90.958578,1.51)); +#211472 = VECTOR('',#211473,1.); +#211473 = DIRECTION('',(0.,0.,1.)); +#211474 = ORIENTED_EDGE('',*,*,#211475,.F.); +#211475 = EDGE_CURVE('',#211437,#211468,#211476,.T.); +#211476 = LINE('',#211477,#211478); +#211477 = CARTESIAN_POINT('',(152.733578,-91.625,1.51)); +#211478 = VECTOR('',#211479,1.); +#211479 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#211480 = PLANE('',#211481); +#211481 = AXIS2_PLACEMENT_3D('',#211482,#211483,#211484); +#211482 = CARTESIAN_POINT('',(152.733578,-91.625,1.51)); +#211483 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211484 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#211485 = ADVANCED_FACE('',(#211486),#211511,.T.); +#211486 = FACE_BOUND('',#211487,.T.); +#211487 = EDGE_LOOP('',(#211488,#211489,#211497,#211505)); +#211488 = ORIENTED_EDGE('',*,*,#211467,.T.); +#211489 = ORIENTED_EDGE('',*,*,#211490,.T.); +#211490 = EDGE_CURVE('',#211460,#211491,#211493,.T.); +#211491 = VERTEX_POINT('',#211492); +#211492 = CARTESIAN_POINT('',(153.4,-89.616422,1.545)); +#211493 = LINE('',#211494,#211495); +#211494 = CARTESIAN_POINT('',(153.4,-90.958578,1.545)); +#211495 = VECTOR('',#211496,1.); +#211496 = DIRECTION('',(0.,1.,0.)); +#211497 = ORIENTED_EDGE('',*,*,#211498,.F.); +#211498 = EDGE_CURVE('',#211499,#211491,#211501,.T.); +#211499 = VERTEX_POINT('',#211500); +#211500 = CARTESIAN_POINT('',(153.4,-89.616422,1.51)); +#211501 = LINE('',#211502,#211503); +#211502 = CARTESIAN_POINT('',(153.4,-89.616422,1.51)); +#211503 = VECTOR('',#211504,1.); +#211504 = DIRECTION('',(0.,0.,1.)); +#211505 = ORIENTED_EDGE('',*,*,#211506,.F.); +#211506 = EDGE_CURVE('',#211468,#211499,#211507,.T.); +#211507 = LINE('',#211508,#211509); +#211508 = CARTESIAN_POINT('',(153.4,-90.958578,1.51)); +#211509 = VECTOR('',#211510,1.); +#211510 = DIRECTION('',(0.,1.,0.)); +#211511 = PLANE('',#211512); +#211512 = AXIS2_PLACEMENT_3D('',#211513,#211514,#211515); +#211513 = CARTESIAN_POINT('',(153.4,-90.958578,1.51)); +#211514 = DIRECTION('',(-1.,0.,0.)); +#211515 = DIRECTION('',(0.,1.,0.)); +#211516 = ADVANCED_FACE('',(#211517),#211542,.T.); +#211517 = FACE_BOUND('',#211518,.T.); +#211518 = EDGE_LOOP('',(#211519,#211520,#211528,#211536)); +#211519 = ORIENTED_EDGE('',*,*,#211498,.T.); +#211520 = ORIENTED_EDGE('',*,*,#211521,.T.); +#211521 = EDGE_CURVE('',#211491,#211522,#211524,.T.); +#211522 = VERTEX_POINT('',#211523); +#211523 = CARTESIAN_POINT('',(153.158578,-89.375,1.545)); +#211524 = LINE('',#211525,#211526); +#211525 = CARTESIAN_POINT('',(153.4,-89.616422,1.545)); +#211526 = VECTOR('',#211527,1.); +#211527 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211528 = ORIENTED_EDGE('',*,*,#211529,.F.); +#211529 = EDGE_CURVE('',#211530,#211522,#211532,.T.); +#211530 = VERTEX_POINT('',#211531); +#211531 = CARTESIAN_POINT('',(153.158578,-89.375,1.51)); +#211532 = LINE('',#211533,#211534); +#211533 = CARTESIAN_POINT('',(153.158578,-89.375,1.51)); +#211534 = VECTOR('',#211535,1.); +#211535 = DIRECTION('',(0.,0.,1.)); +#211536 = ORIENTED_EDGE('',*,*,#211537,.F.); +#211537 = EDGE_CURVE('',#211499,#211530,#211538,.T.); +#211538 = LINE('',#211539,#211540); +#211539 = CARTESIAN_POINT('',(153.4,-89.616422,1.51)); +#211540 = VECTOR('',#211541,1.); +#211541 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211542 = PLANE('',#211543); +#211543 = AXIS2_PLACEMENT_3D('',#211544,#211545,#211546); +#211544 = CARTESIAN_POINT('',(153.4,-89.616422,1.51)); +#211545 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#211546 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#211547 = ADVANCED_FACE('',(#211548),#211573,.T.); +#211548 = FACE_BOUND('',#211549,.T.); +#211549 = EDGE_LOOP('',(#211550,#211551,#211559,#211567)); +#211550 = ORIENTED_EDGE('',*,*,#211529,.T.); +#211551 = ORIENTED_EDGE('',*,*,#211552,.T.); +#211552 = EDGE_CURVE('',#211522,#211553,#211555,.T.); +#211553 = VERTEX_POINT('',#211554); +#211554 = CARTESIAN_POINT('',(152.280491,-89.373079,1.545)); +#211555 = LINE('',#211556,#211557); +#211556 = CARTESIAN_POINT('',(153.158578,-89.375,1.545)); +#211557 = VECTOR('',#211558,1.); +#211558 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#211559 = ORIENTED_EDGE('',*,*,#211560,.F.); +#211560 = EDGE_CURVE('',#211561,#211553,#211563,.T.); +#211561 = VERTEX_POINT('',#211562); +#211562 = CARTESIAN_POINT('',(152.280491,-89.373079,1.51)); +#211563 = LINE('',#211564,#211565); +#211564 = CARTESIAN_POINT('',(152.280491,-89.373079,1.51)); +#211565 = VECTOR('',#211566,1.); +#211566 = DIRECTION('',(0.,0.,1.)); +#211567 = ORIENTED_EDGE('',*,*,#211568,.F.); +#211568 = EDGE_CURVE('',#211530,#211561,#211569,.T.); +#211569 = LINE('',#211570,#211571); +#211570 = CARTESIAN_POINT('',(153.158578,-89.375,1.51)); +#211571 = VECTOR('',#211572,1.); +#211572 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#211573 = PLANE('',#211574); +#211574 = AXIS2_PLACEMENT_3D('',#211575,#211576,#211577); +#211575 = CARTESIAN_POINT('',(153.158578,-89.375,1.51)); +#211576 = DIRECTION('',(-2.187705094126E-03,-0.99999760697,0.)); +#211577 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#211578 = ADVANCED_FACE('',(#211579),#211604,.T.); +#211579 = FACE_BOUND('',#211580,.T.); +#211580 = EDGE_LOOP('',(#211581,#211582,#211590,#211598)); +#211581 = ORIENTED_EDGE('',*,*,#211560,.T.); +#211582 = ORIENTED_EDGE('',*,*,#211583,.T.); +#211583 = EDGE_CURVE('',#211553,#211584,#211586,.T.); +#211584 = VERTEX_POINT('',#211585); +#211585 = CARTESIAN_POINT('',(152.244442,-89.358147,1.545)); +#211586 = LINE('',#211587,#211588); +#211587 = CARTESIAN_POINT('',(152.280491,-89.373079,1.545)); +#211588 = VECTOR('',#211589,1.); +#211589 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#211590 = ORIENTED_EDGE('',*,*,#211591,.F.); +#211591 = EDGE_CURVE('',#211592,#211584,#211594,.T.); +#211592 = VERTEX_POINT('',#211593); +#211593 = CARTESIAN_POINT('',(152.244442,-89.358147,1.51)); +#211594 = LINE('',#211595,#211596); +#211595 = CARTESIAN_POINT('',(152.244442,-89.358147,1.51)); +#211596 = VECTOR('',#211597,1.); +#211597 = DIRECTION('',(0.,0.,1.)); +#211598 = ORIENTED_EDGE('',*,*,#211599,.F.); +#211599 = EDGE_CURVE('',#211561,#211592,#211600,.T.); +#211600 = LINE('',#211601,#211602); +#211601 = CARTESIAN_POINT('',(152.280491,-89.373079,1.51)); +#211602 = VECTOR('',#211603,1.); +#211603 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#211604 = PLANE('',#211605); +#211605 = AXIS2_PLACEMENT_3D('',#211606,#211607,#211608); +#211606 = CARTESIAN_POINT('',(152.280491,-89.373079,1.51)); +#211607 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#211608 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#211609 = ADVANCED_FACE('',(#211610),#211635,.T.); +#211610 = FACE_BOUND('',#211611,.T.); +#211611 = EDGE_LOOP('',(#211612,#211613,#211621,#211629)); +#211612 = ORIENTED_EDGE('',*,*,#211591,.T.); +#211613 = ORIENTED_EDGE('',*,*,#211614,.T.); +#211614 = EDGE_CURVE('',#211584,#211615,#211617,.T.); +#211615 = VERTEX_POINT('',#211616); +#211616 = CARTESIAN_POINT('',(150.416853,-87.530557,1.545)); +#211617 = LINE('',#211618,#211619); +#211618 = CARTESIAN_POINT('',(152.244442,-89.358147,1.545)); +#211619 = VECTOR('',#211620,1.); +#211620 = DIRECTION('',(-0.707106587733,0.70710697464,0.)); +#211621 = ORIENTED_EDGE('',*,*,#211622,.F.); +#211622 = EDGE_CURVE('',#211623,#211615,#211625,.T.); +#211623 = VERTEX_POINT('',#211624); +#211624 = CARTESIAN_POINT('',(150.416853,-87.530557,1.51)); +#211625 = LINE('',#211626,#211627); +#211626 = CARTESIAN_POINT('',(150.416853,-87.530557,1.51)); +#211627 = VECTOR('',#211628,1.); +#211628 = DIRECTION('',(0.,0.,1.)); +#211629 = ORIENTED_EDGE('',*,*,#211630,.F.); +#211630 = EDGE_CURVE('',#211592,#211623,#211631,.T.); +#211631 = LINE('',#211632,#211633); +#211632 = CARTESIAN_POINT('',(152.244442,-89.358147,1.51)); +#211633 = VECTOR('',#211634,1.); +#211634 = DIRECTION('',(-0.707106587733,0.70710697464,0.)); +#211635 = PLANE('',#211636); +#211636 = AXIS2_PLACEMENT_3D('',#211637,#211638,#211639); +#211637 = CARTESIAN_POINT('',(152.244442,-89.358147,1.51)); +#211638 = DIRECTION('',(-0.70710697464,-0.707106587733,0.)); +#211639 = DIRECTION('',(-0.707106587733,0.70710697464,0.)); +#211640 = ADVANCED_FACE('',(#211641),#211666,.T.); +#211641 = FACE_BOUND('',#211642,.T.); +#211642 = EDGE_LOOP('',(#211643,#211644,#211652,#211660)); +#211643 = ORIENTED_EDGE('',*,*,#211622,.T.); +#211644 = ORIENTED_EDGE('',*,*,#211645,.T.); +#211645 = EDGE_CURVE('',#211615,#211646,#211648,.T.); +#211646 = VERTEX_POINT('',#211647); +#211647 = CARTESIAN_POINT('',(150.401921,-87.494509,1.545)); +#211648 = LINE('',#211649,#211650); +#211649 = CARTESIAN_POINT('',(150.416853,-87.530557,1.545)); +#211650 = VECTOR('',#211651,1.); +#211651 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#211652 = ORIENTED_EDGE('',*,*,#211653,.F.); +#211653 = EDGE_CURVE('',#211654,#211646,#211656,.T.); +#211654 = VERTEX_POINT('',#211655); +#211655 = CARTESIAN_POINT('',(150.401921,-87.494509,1.51)); +#211656 = LINE('',#211657,#211658); +#211657 = CARTESIAN_POINT('',(150.401921,-87.494509,1.51)); +#211658 = VECTOR('',#211659,1.); +#211659 = DIRECTION('',(0.,0.,1.)); +#211660 = ORIENTED_EDGE('',*,*,#211661,.F.); +#211661 = EDGE_CURVE('',#211623,#211654,#211662,.T.); +#211662 = LINE('',#211663,#211664); +#211663 = CARTESIAN_POINT('',(150.416853,-87.530557,1.51)); +#211664 = VECTOR('',#211665,1.); +#211665 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#211666 = PLANE('',#211667); +#211667 = AXIS2_PLACEMENT_3D('',#211668,#211669,#211670); +#211668 = CARTESIAN_POINT('',(150.416853,-87.530557,1.51)); +#211669 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#211670 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#211671 = ADVANCED_FACE('',(#211672),#211697,.T.); +#211672 = FACE_BOUND('',#211673,.T.); +#211673 = EDGE_LOOP('',(#211674,#211675,#211683,#211691)); +#211674 = ORIENTED_EDGE('',*,*,#211653,.T.); +#211675 = ORIENTED_EDGE('',*,*,#211676,.T.); +#211676 = EDGE_CURVE('',#211646,#211677,#211679,.T.); +#211677 = VERTEX_POINT('',#211678); +#211678 = CARTESIAN_POINT('',(150.4,-85.78113,1.545)); +#211679 = LINE('',#211680,#211681); +#211680 = CARTESIAN_POINT('',(150.401921,-87.494509,1.545)); +#211681 = VECTOR('',#211682,1.); +#211682 = DIRECTION('',(-1.121175637497E-03,0.999999371482,0.)); +#211683 = ORIENTED_EDGE('',*,*,#211684,.F.); +#211684 = EDGE_CURVE('',#211685,#211677,#211687,.T.); +#211685 = VERTEX_POINT('',#211686); +#211686 = CARTESIAN_POINT('',(150.4,-85.78113,1.51)); +#211687 = LINE('',#211688,#211689); +#211688 = CARTESIAN_POINT('',(150.4,-85.78113,1.51)); +#211689 = VECTOR('',#211690,1.); +#211690 = DIRECTION('',(0.,0.,1.)); +#211691 = ORIENTED_EDGE('',*,*,#211692,.F.); +#211692 = EDGE_CURVE('',#211654,#211685,#211693,.T.); +#211693 = LINE('',#211694,#211695); +#211694 = CARTESIAN_POINT('',(150.401921,-87.494509,1.51)); +#211695 = VECTOR('',#211696,1.); +#211696 = DIRECTION('',(-1.121175637497E-03,0.999999371482,0.)); +#211697 = PLANE('',#211698); +#211698 = AXIS2_PLACEMENT_3D('',#211699,#211700,#211701); +#211699 = CARTESIAN_POINT('',(150.401921,-87.494509,1.51)); +#211700 = DIRECTION('',(-0.999999371482,-1.121175637497E-03,0.)); +#211701 = DIRECTION('',(-1.121175637497E-03,0.999999371482,0.)); +#211702 = ADVANCED_FACE('',(#211703),#211728,.T.); +#211703 = FACE_BOUND('',#211704,.T.); +#211704 = EDGE_LOOP('',(#211705,#211706,#211714,#211722)); +#211705 = ORIENTED_EDGE('',*,*,#211684,.T.); +#211706 = ORIENTED_EDGE('',*,*,#211707,.T.); +#211707 = EDGE_CURVE('',#211677,#211708,#211710,.T.); +#211708 = VERTEX_POINT('',#211709); +#211709 = CARTESIAN_POINT('',(150.385195,-85.777164,1.545)); +#211710 = LINE('',#211711,#211712); +#211711 = CARTESIAN_POINT('',(150.4,-85.78113,1.545)); +#211712 = VECTOR('',#211713,1.); +#211713 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#211714 = ORIENTED_EDGE('',*,*,#211715,.F.); +#211715 = EDGE_CURVE('',#211716,#211708,#211718,.T.); +#211716 = VERTEX_POINT('',#211717); +#211717 = CARTESIAN_POINT('',(150.385195,-85.777164,1.51)); +#211718 = LINE('',#211719,#211720); +#211719 = CARTESIAN_POINT('',(150.385195,-85.777164,1.51)); +#211720 = VECTOR('',#211721,1.); +#211721 = DIRECTION('',(0.,0.,1.)); +#211722 = ORIENTED_EDGE('',*,*,#211723,.F.); +#211723 = EDGE_CURVE('',#211685,#211716,#211724,.T.); +#211724 = LINE('',#211725,#211726); +#211725 = CARTESIAN_POINT('',(150.4,-85.78113,1.51)); +#211726 = VECTOR('',#211727,1.); +#211727 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#211728 = PLANE('',#211729); +#211729 = AXIS2_PLACEMENT_3D('',#211730,#211731,#211732); +#211730 = CARTESIAN_POINT('',(150.4,-85.78113,1.51)); +#211731 = DIRECTION('',(-0.258758913865,-0.9659419364,0.)); +#211732 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#211733 = ADVANCED_FACE('',(#211734),#211761,.T.); +#211734 = FACE_BOUND('',#211735,.T.); +#211735 = EDGE_LOOP('',(#211736,#211737,#211746,#211754)); +#211736 = ORIENTED_EDGE('',*,*,#211715,.T.); +#211737 = ORIENTED_EDGE('',*,*,#211738,.T.); +#211738 = EDGE_CURVE('',#211708,#211739,#211741,.T.); +#211739 = VERTEX_POINT('',#211740); +#211740 = CARTESIAN_POINT('',(150.614805,-85.777164,1.545)); +#211741 = CIRCLE('',#211742,0.299999472923); +#211742 = AXIS2_PLACEMENT_3D('',#211743,#211744,#211745); +#211743 = CARTESIAN_POINT('',(150.5,-85.50000069844,1.545)); +#211744 = DIRECTION('',(0.,0.,-1.)); +#211745 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#211746 = ORIENTED_EDGE('',*,*,#211747,.F.); +#211747 = EDGE_CURVE('',#211748,#211739,#211750,.T.); +#211748 = VERTEX_POINT('',#211749); +#211749 = CARTESIAN_POINT('',(150.614805,-85.777164,1.51)); +#211750 = LINE('',#211751,#211752); +#211751 = CARTESIAN_POINT('',(150.614805,-85.777164,1.51)); +#211752 = VECTOR('',#211753,1.); +#211753 = DIRECTION('',(0.,0.,1.)); +#211754 = ORIENTED_EDGE('',*,*,#211755,.F.); +#211755 = EDGE_CURVE('',#211716,#211748,#211756,.T.); +#211756 = CIRCLE('',#211757,0.299999472923); +#211757 = AXIS2_PLACEMENT_3D('',#211758,#211759,#211760); +#211758 = CARTESIAN_POINT('',(150.5,-85.50000069844,1.51)); +#211759 = DIRECTION('',(0.,0.,-1.)); +#211760 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#211761 = CYLINDRICAL_SURFACE('',#211762,0.299999472923); +#211762 = AXIS2_PLACEMENT_3D('',#211763,#211764,#211765); +#211763 = CARTESIAN_POINT('',(150.5,-85.50000069844,1.51)); +#211764 = DIRECTION('',(0.,0.,-1.)); +#211765 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#211766 = ADVANCED_FACE('',(#211767),#211783,.T.); +#211767 = FACE_BOUND('',#211768,.T.); +#211768 = EDGE_LOOP('',(#211769,#211770,#211776,#211777)); +#211769 = ORIENTED_EDGE('',*,*,#211747,.T.); +#211770 = ORIENTED_EDGE('',*,*,#211771,.T.); +#211771 = EDGE_CURVE('',#211739,#211047,#211772,.T.); +#211772 = LINE('',#211773,#211774); +#211773 = CARTESIAN_POINT('',(150.614805,-85.777164,1.545)); +#211774 = VECTOR('',#211775,1.); +#211775 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#211776 = ORIENTED_EDGE('',*,*,#211044,.F.); +#211777 = ORIENTED_EDGE('',*,*,#211778,.F.); +#211778 = EDGE_CURVE('',#211748,#211045,#211779,.T.); +#211779 = LINE('',#211780,#211781); +#211780 = CARTESIAN_POINT('',(150.614805,-85.777164,1.51)); +#211781 = VECTOR('',#211782,1.); +#211782 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#211783 = PLANE('',#211784); +#211784 = AXIS2_PLACEMENT_3D('',#211785,#211786,#211787); +#211785 = CARTESIAN_POINT('',(150.614805,-85.777164,1.51)); +#211786 = DIRECTION('',(0.258758913865,-0.9659419364,0.)); +#211787 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#211788 = ADVANCED_FACE('',(#211789),#211816,.F.); +#211789 = FACE_BOUND('',#211790,.T.); +#211790 = EDGE_LOOP('',(#211791,#211801,#211808,#211809)); +#211791 = ORIENTED_EDGE('',*,*,#211792,.T.); +#211792 = EDGE_CURVE('',#211793,#211795,#211797,.T.); +#211793 = VERTEX_POINT('',#211794); +#211794 = CARTESIAN_POINT('',(150.637255,-85.5,1.51)); +#211795 = VERTEX_POINT('',#211796); +#211796 = CARTESIAN_POINT('',(150.637255,-85.5,1.545)); +#211797 = LINE('',#211798,#211799); +#211798 = CARTESIAN_POINT('',(150.637255,-85.5,1.51)); +#211799 = VECTOR('',#211800,1.); +#211800 = DIRECTION('',(0.,0.,1.)); +#211801 = ORIENTED_EDGE('',*,*,#211802,.T.); +#211802 = EDGE_CURVE('',#211795,#211795,#211803,.T.); +#211803 = CIRCLE('',#211804,0.137255); +#211804 = AXIS2_PLACEMENT_3D('',#211805,#211806,#211807); +#211805 = CARTESIAN_POINT('',(150.5,-85.5,1.545)); +#211806 = DIRECTION('',(0.,0.,1.)); +#211807 = DIRECTION('',(1.,0.,-0.)); +#211808 = ORIENTED_EDGE('',*,*,#211792,.F.); +#211809 = ORIENTED_EDGE('',*,*,#211810,.F.); +#211810 = EDGE_CURVE('',#211793,#211793,#211811,.T.); +#211811 = CIRCLE('',#211812,0.137255); +#211812 = AXIS2_PLACEMENT_3D('',#211813,#211814,#211815); +#211813 = CARTESIAN_POINT('',(150.5,-85.5,1.51)); +#211814 = DIRECTION('',(0.,0.,1.)); +#211815 = DIRECTION('',(1.,0.,-0.)); +#211816 = CYLINDRICAL_SURFACE('',#211817,0.137255); +#211817 = AXIS2_PLACEMENT_3D('',#211818,#211819,#211820); +#211818 = CARTESIAN_POINT('',(150.5,-85.5,1.51)); +#211819 = DIRECTION('',(-0.,-0.,-1.)); +#211820 = DIRECTION('',(1.,0.,-0.)); +#211821 = ADVANCED_FACE('',(#211822,#211848),#211851,.F.); +#211822 = FACE_BOUND('',#211823,.T.); +#211823 = EDGE_LOOP('',(#211824,#211825,#211826,#211827,#211828,#211829, + #211830,#211831,#211832,#211833,#211834,#211835,#211836,#211837, + #211838,#211839,#211840,#211841,#211842,#211843,#211844,#211845, + #211846,#211847)); +#211824 = ORIENTED_EDGE('',*,*,#211070,.T.); +#211825 = ORIENTED_EDGE('',*,*,#211101,.T.); +#211826 = ORIENTED_EDGE('',*,*,#211132,.T.); +#211827 = ORIENTED_EDGE('',*,*,#211163,.T.); +#211828 = ORIENTED_EDGE('',*,*,#211194,.T.); +#211829 = ORIENTED_EDGE('',*,*,#211225,.T.); +#211830 = ORIENTED_EDGE('',*,*,#211256,.T.); +#211831 = ORIENTED_EDGE('',*,*,#211287,.T.); +#211832 = ORIENTED_EDGE('',*,*,#211318,.T.); +#211833 = ORIENTED_EDGE('',*,*,#211349,.T.); +#211834 = ORIENTED_EDGE('',*,*,#211380,.T.); +#211835 = ORIENTED_EDGE('',*,*,#211412,.T.); +#211836 = ORIENTED_EDGE('',*,*,#211444,.T.); +#211837 = ORIENTED_EDGE('',*,*,#211475,.T.); +#211838 = ORIENTED_EDGE('',*,*,#211506,.T.); +#211839 = ORIENTED_EDGE('',*,*,#211537,.T.); +#211840 = ORIENTED_EDGE('',*,*,#211568,.T.); +#211841 = ORIENTED_EDGE('',*,*,#211599,.T.); +#211842 = ORIENTED_EDGE('',*,*,#211630,.T.); +#211843 = ORIENTED_EDGE('',*,*,#211661,.T.); +#211844 = ORIENTED_EDGE('',*,*,#211692,.T.); +#211845 = ORIENTED_EDGE('',*,*,#211723,.T.); +#211846 = ORIENTED_EDGE('',*,*,#211755,.T.); +#211847 = ORIENTED_EDGE('',*,*,#211778,.T.); +#211848 = FACE_BOUND('',#211849,.T.); +#211849 = EDGE_LOOP('',(#211850)); +#211850 = ORIENTED_EDGE('',*,*,#211810,.T.); +#211851 = PLANE('',#211852); +#211852 = AXIS2_PLACEMENT_3D('',#211853,#211854,#211855); +#211853 = CARTESIAN_POINT('',(0.,0.,1.51)); +#211854 = DIRECTION('',(0.,0.,1.)); +#211855 = DIRECTION('',(1.,0.,-0.)); +#211856 = ADVANCED_FACE('',(#211857,#211883),#211886,.T.); +#211857 = FACE_BOUND('',#211858,.F.); +#211858 = EDGE_LOOP('',(#211859,#211860,#211861,#211862,#211863,#211864, + #211865,#211866,#211867,#211868,#211869,#211870,#211871,#211872, + #211873,#211874,#211875,#211876,#211877,#211878,#211879,#211880, + #211881,#211882)); +#211859 = ORIENTED_EDGE('',*,*,#211054,.T.); +#211860 = ORIENTED_EDGE('',*,*,#211085,.T.); +#211861 = ORIENTED_EDGE('',*,*,#211116,.T.); +#211862 = ORIENTED_EDGE('',*,*,#211147,.T.); +#211863 = ORIENTED_EDGE('',*,*,#211178,.T.); +#211864 = ORIENTED_EDGE('',*,*,#211209,.T.); +#211865 = ORIENTED_EDGE('',*,*,#211240,.T.); +#211866 = ORIENTED_EDGE('',*,*,#211271,.T.); +#211867 = ORIENTED_EDGE('',*,*,#211302,.T.); +#211868 = ORIENTED_EDGE('',*,*,#211333,.T.); +#211869 = ORIENTED_EDGE('',*,*,#211364,.T.); +#211870 = ORIENTED_EDGE('',*,*,#211395,.T.); +#211871 = ORIENTED_EDGE('',*,*,#211428,.T.); +#211872 = ORIENTED_EDGE('',*,*,#211459,.T.); +#211873 = ORIENTED_EDGE('',*,*,#211490,.T.); +#211874 = ORIENTED_EDGE('',*,*,#211521,.T.); +#211875 = ORIENTED_EDGE('',*,*,#211552,.T.); +#211876 = ORIENTED_EDGE('',*,*,#211583,.T.); +#211877 = ORIENTED_EDGE('',*,*,#211614,.T.); +#211878 = ORIENTED_EDGE('',*,*,#211645,.T.); +#211879 = ORIENTED_EDGE('',*,*,#211676,.T.); +#211880 = ORIENTED_EDGE('',*,*,#211707,.T.); +#211881 = ORIENTED_EDGE('',*,*,#211738,.T.); +#211882 = ORIENTED_EDGE('',*,*,#211771,.T.); +#211883 = FACE_BOUND('',#211884,.F.); +#211884 = EDGE_LOOP('',(#211885)); +#211885 = ORIENTED_EDGE('',*,*,#211802,.T.); +#211886 = PLANE('',#211887); +#211887 = AXIS2_PLACEMENT_3D('',#211888,#211889,#211890); +#211888 = CARTESIAN_POINT('',(0.,0.,1.545)); +#211889 = DIRECTION('',(0.,0.,1.)); +#211890 = DIRECTION('',(1.,0.,-0.)); +#211891 = MANIFOLD_SOLID_BREP('',#211892); +#211892 = CLOSED_SHELL('',(#211893,#211935,#211966,#211999,#212030, + #212061,#212092,#212123,#212154,#212185,#212216,#212247,#212278, + #212309,#212342,#212373,#212404,#212435,#212466,#212497,#212528, + #212559,#212590,#212621,#212652,#212683,#212714,#212736,#212769, + #212807)); +#211893 = ADVANCED_FACE('',(#211894),#211930,.T.); +#211894 = FACE_BOUND('',#211895,.T.); +#211895 = EDGE_LOOP('',(#211896,#211906,#211915,#211923)); +#211896 = ORIENTED_EDGE('',*,*,#211897,.T.); +#211897 = EDGE_CURVE('',#211898,#211900,#211902,.T.); +#211898 = VERTEX_POINT('',#211899); +#211899 = CARTESIAN_POINT('',(146.730491,-73.638079,1.51)); +#211900 = VERTEX_POINT('',#211901); +#211901 = CARTESIAN_POINT('',(146.730491,-73.638079,1.545)); +#211902 = LINE('',#211903,#211904); +#211903 = CARTESIAN_POINT('',(146.730491,-73.638079,1.51)); +#211904 = VECTOR('',#211905,1.); +#211905 = DIRECTION('',(0.,0.,1.)); +#211906 = ORIENTED_EDGE('',*,*,#211907,.T.); +#211907 = EDGE_CURVE('',#211900,#211908,#211910,.T.); +#211908 = VERTEX_POINT('',#211909); +#211909 = CARTESIAN_POINT('',(146.730491,-73.441921,1.545)); +#211910 = CIRCLE('',#211911,0.100000456609); +#211911 = AXIS2_PLACEMENT_3D('',#211912,#211913,#211914); +#211912 = CARTESIAN_POINT('',(146.75,-73.54,1.545)); +#211913 = DIRECTION('',(0.,0.,-1.)); +#211914 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#211915 = ORIENTED_EDGE('',*,*,#211916,.F.); +#211916 = EDGE_CURVE('',#211917,#211908,#211919,.T.); +#211917 = VERTEX_POINT('',#211918); +#211918 = CARTESIAN_POINT('',(146.730491,-73.441921,1.51)); +#211919 = LINE('',#211920,#211921); +#211920 = CARTESIAN_POINT('',(146.730491,-73.441921,1.51)); +#211921 = VECTOR('',#211922,1.); +#211922 = DIRECTION('',(0.,0.,1.)); +#211923 = ORIENTED_EDGE('',*,*,#211924,.F.); +#211924 = EDGE_CURVE('',#211898,#211917,#211925,.T.); +#211925 = CIRCLE('',#211926,0.100000456609); +#211926 = AXIS2_PLACEMENT_3D('',#211927,#211928,#211929); +#211927 = CARTESIAN_POINT('',(146.75,-73.54,1.51)); +#211928 = DIRECTION('',(0.,0.,-1.)); +#211929 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#211930 = CYLINDRICAL_SURFACE('',#211931,0.100000456609); +#211931 = AXIS2_PLACEMENT_3D('',#211932,#211933,#211934); +#211932 = CARTESIAN_POINT('',(146.75,-73.54,1.51)); +#211933 = DIRECTION('',(0.,0.,-1.)); +#211934 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#211935 = ADVANCED_FACE('',(#211936),#211961,.T.); +#211936 = FACE_BOUND('',#211937,.T.); +#211937 = EDGE_LOOP('',(#211938,#211939,#211947,#211955)); +#211938 = ORIENTED_EDGE('',*,*,#211916,.T.); +#211939 = ORIENTED_EDGE('',*,*,#211940,.T.); +#211940 = EDGE_CURVE('',#211908,#211941,#211943,.T.); +#211941 = VERTEX_POINT('',#211942); +#211942 = CARTESIAN_POINT('',(147.619509,-73.441921,1.545)); +#211943 = LINE('',#211944,#211945); +#211944 = CARTESIAN_POINT('',(146.730491,-73.441921,1.545)); +#211945 = VECTOR('',#211946,1.); +#211946 = DIRECTION('',(1.,0.,0.)); +#211947 = ORIENTED_EDGE('',*,*,#211948,.F.); +#211948 = EDGE_CURVE('',#211949,#211941,#211951,.T.); +#211949 = VERTEX_POINT('',#211950); +#211950 = CARTESIAN_POINT('',(147.619509,-73.441921,1.51)); +#211951 = LINE('',#211952,#211953); +#211952 = CARTESIAN_POINT('',(147.619509,-73.441921,1.51)); +#211953 = VECTOR('',#211954,1.); +#211954 = DIRECTION('',(0.,0.,1.)); +#211955 = ORIENTED_EDGE('',*,*,#211956,.F.); +#211956 = EDGE_CURVE('',#211917,#211949,#211957,.T.); +#211957 = LINE('',#211958,#211959); +#211958 = CARTESIAN_POINT('',(146.730491,-73.441921,1.51)); +#211959 = VECTOR('',#211960,1.); +#211960 = DIRECTION('',(1.,0.,0.)); +#211961 = PLANE('',#211962); +#211962 = AXIS2_PLACEMENT_3D('',#211963,#211964,#211965); +#211963 = CARTESIAN_POINT('',(146.730491,-73.441921,1.51)); +#211964 = DIRECTION('',(0.,1.,0.)); +#211965 = DIRECTION('',(1.,0.,0.)); +#211966 = ADVANCED_FACE('',(#211967),#211994,.T.); +#211967 = FACE_BOUND('',#211968,.T.); +#211968 = EDGE_LOOP('',(#211969,#211970,#211979,#211987)); +#211969 = ORIENTED_EDGE('',*,*,#211948,.T.); +#211970 = ORIENTED_EDGE('',*,*,#211971,.T.); +#211971 = EDGE_CURVE('',#211941,#211972,#211974,.T.); +#211972 = VERTEX_POINT('',#211973); +#211973 = CARTESIAN_POINT('',(147.698079,-73.520491,1.545)); +#211974 = CIRCLE('',#211975,0.100002891901); +#211975 = AXIS2_PLACEMENT_3D('',#211976,#211977,#211978); +#211976 = CARTESIAN_POINT('',(147.59999792896,-73.54000207103,1.545)); +#211977 = DIRECTION('',(0.,0.,-1.)); +#211978 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#211979 = ORIENTED_EDGE('',*,*,#211980,.F.); +#211980 = EDGE_CURVE('',#211981,#211972,#211983,.T.); +#211981 = VERTEX_POINT('',#211982); +#211982 = CARTESIAN_POINT('',(147.698079,-73.520491,1.51)); +#211983 = LINE('',#211984,#211985); +#211984 = CARTESIAN_POINT('',(147.698079,-73.520491,1.51)); +#211985 = VECTOR('',#211986,1.); +#211986 = DIRECTION('',(0.,0.,1.)); +#211987 = ORIENTED_EDGE('',*,*,#211988,.F.); +#211988 = EDGE_CURVE('',#211949,#211981,#211989,.T.); +#211989 = CIRCLE('',#211990,0.100002891901); +#211990 = AXIS2_PLACEMENT_3D('',#211991,#211992,#211993); +#211991 = CARTESIAN_POINT('',(147.59999792896,-73.54000207103,1.51)); +#211992 = DIRECTION('',(0.,0.,-1.)); +#211993 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#211994 = CYLINDRICAL_SURFACE('',#211995,0.100002891901); +#211995 = AXIS2_PLACEMENT_3D('',#211996,#211997,#211998); +#211996 = CARTESIAN_POINT('',(147.59999792896,-73.54000207103,1.51)); +#211997 = DIRECTION('',(0.,0.,-1.)); +#211998 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#211999 = ADVANCED_FACE('',(#212000),#212025,.T.); +#212000 = FACE_BOUND('',#212001,.T.); +#212001 = EDGE_LOOP('',(#212002,#212003,#212011,#212019)); +#212002 = ORIENTED_EDGE('',*,*,#211980,.T.); +#212003 = ORIENTED_EDGE('',*,*,#212004,.T.); +#212004 = EDGE_CURVE('',#211972,#212005,#212007,.T.); +#212005 = VERTEX_POINT('',#212006); +#212006 = CARTESIAN_POINT('',(147.7,-73.624264,1.545)); +#212007 = LINE('',#212008,#212009); +#212008 = CARTESIAN_POINT('',(147.698079,-73.520491,1.545)); +#212009 = VECTOR('',#212010,1.); +#212010 = DIRECTION('',(1.850838794784E-02,-0.999828705117,0.)); +#212011 = ORIENTED_EDGE('',*,*,#212012,.F.); +#212012 = EDGE_CURVE('',#212013,#212005,#212015,.T.); +#212013 = VERTEX_POINT('',#212014); +#212014 = CARTESIAN_POINT('',(147.7,-73.624264,1.51)); +#212015 = LINE('',#212016,#212017); +#212016 = CARTESIAN_POINT('',(147.7,-73.624264,1.51)); +#212017 = VECTOR('',#212018,1.); +#212018 = DIRECTION('',(0.,0.,1.)); +#212019 = ORIENTED_EDGE('',*,*,#212020,.F.); +#212020 = EDGE_CURVE('',#211981,#212013,#212021,.T.); +#212021 = LINE('',#212022,#212023); +#212022 = CARTESIAN_POINT('',(147.698079,-73.520491,1.51)); +#212023 = VECTOR('',#212024,1.); +#212024 = DIRECTION('',(1.850838794784E-02,-0.999828705117,0.)); +#212025 = PLANE('',#212026); +#212026 = AXIS2_PLACEMENT_3D('',#212027,#212028,#212029); +#212027 = CARTESIAN_POINT('',(147.698079,-73.520491,1.51)); +#212028 = DIRECTION('',(0.999828705117,1.850838794784E-02,-0.)); +#212029 = DIRECTION('',(1.850838794784E-02,-0.999828705117,0.)); +#212030 = ADVANCED_FACE('',(#212031),#212056,.T.); +#212031 = FACE_BOUND('',#212032,.T.); +#212032 = EDGE_LOOP('',(#212033,#212034,#212042,#212050)); +#212033 = ORIENTED_EDGE('',*,*,#212012,.T.); +#212034 = ORIENTED_EDGE('',*,*,#212035,.T.); +#212035 = EDGE_CURVE('',#212005,#212036,#212038,.T.); +#212036 = VERTEX_POINT('',#212037); +#212037 = CARTESIAN_POINT('',(148.027412,-73.954394,1.545)); +#212038 = LINE('',#212039,#212040); +#212039 = CARTESIAN_POINT('',(147.7,-73.624264,1.545)); +#212040 = VECTOR('',#212041,1.); +#212041 = DIRECTION('',(0.704177885458,-0.710023595123,0.)); +#212042 = ORIENTED_EDGE('',*,*,#212043,.F.); +#212043 = EDGE_CURVE('',#212044,#212036,#212046,.T.); +#212044 = VERTEX_POINT('',#212045); +#212045 = CARTESIAN_POINT('',(148.027412,-73.954394,1.51)); +#212046 = LINE('',#212047,#212048); +#212047 = CARTESIAN_POINT('',(148.027412,-73.954394,1.51)); +#212048 = VECTOR('',#212049,1.); +#212049 = DIRECTION('',(0.,0.,1.)); +#212050 = ORIENTED_EDGE('',*,*,#212051,.F.); +#212051 = EDGE_CURVE('',#212013,#212044,#212052,.T.); +#212052 = LINE('',#212053,#212054); +#212053 = CARTESIAN_POINT('',(147.7,-73.624264,1.51)); +#212054 = VECTOR('',#212055,1.); +#212055 = DIRECTION('',(0.704177885458,-0.710023595123,0.)); +#212056 = PLANE('',#212057); +#212057 = AXIS2_PLACEMENT_3D('',#212058,#212059,#212060); +#212058 = CARTESIAN_POINT('',(147.7,-73.624264,1.51)); +#212059 = DIRECTION('',(0.710023595123,0.704177885458,-0.)); +#212060 = DIRECTION('',(0.704177885458,-0.710023595123,0.)); +#212061 = ADVANCED_FACE('',(#212062),#212087,.T.); +#212062 = FACE_BOUND('',#212063,.T.); +#212063 = EDGE_LOOP('',(#212064,#212065,#212073,#212081)); +#212064 = ORIENTED_EDGE('',*,*,#212043,.T.); +#212065 = ORIENTED_EDGE('',*,*,#212066,.T.); +#212066 = EDGE_CURVE('',#212036,#212067,#212069,.T.); +#212067 = VERTEX_POINT('',#212068); +#212068 = CARTESIAN_POINT('',(148.042344,-73.990442,1.545)); +#212069 = LINE('',#212070,#212071); +#212070 = CARTESIAN_POINT('',(148.027412,-73.954394,1.545)); +#212071 = VECTOR('',#212072,1.); +#212072 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212073 = ORIENTED_EDGE('',*,*,#212074,.F.); +#212074 = EDGE_CURVE('',#212075,#212067,#212077,.T.); +#212075 = VERTEX_POINT('',#212076); +#212076 = CARTESIAN_POINT('',(148.042344,-73.990442,1.51)); +#212077 = LINE('',#212078,#212079); +#212078 = CARTESIAN_POINT('',(148.042344,-73.990442,1.51)); +#212079 = VECTOR('',#212080,1.); +#212080 = DIRECTION('',(0.,0.,1.)); +#212081 = ORIENTED_EDGE('',*,*,#212082,.F.); +#212082 = EDGE_CURVE('',#212044,#212075,#212083,.T.); +#212083 = LINE('',#212084,#212085); +#212084 = CARTESIAN_POINT('',(148.027412,-73.954394,1.51)); +#212085 = VECTOR('',#212086,1.); +#212086 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212087 = PLANE('',#212088); +#212088 = AXIS2_PLACEMENT_3D('',#212089,#212090,#212091); +#212089 = CARTESIAN_POINT('',(148.027412,-73.954394,1.51)); +#212090 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#212091 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212092 = ADVANCED_FACE('',(#212093),#212118,.T.); +#212093 = FACE_BOUND('',#212094,.T.); +#212094 = EDGE_LOOP('',(#212095,#212096,#212104,#212112)); +#212095 = ORIENTED_EDGE('',*,*,#212074,.T.); +#212096 = ORIENTED_EDGE('',*,*,#212097,.T.); +#212097 = EDGE_CURVE('',#212067,#212098,#212100,.T.); +#212098 = VERTEX_POINT('',#212099); +#212099 = CARTESIAN_POINT('',(148.044265,-74.162842,1.545)); +#212100 = LINE('',#212101,#212102); +#212101 = CARTESIAN_POINT('',(148.042344,-73.990442,1.545)); +#212102 = VECTOR('',#212103,1.); +#212103 = DIRECTION('',(1.114199974372E-02,-0.999937925994,0.)); +#212104 = ORIENTED_EDGE('',*,*,#212105,.F.); +#212105 = EDGE_CURVE('',#212106,#212098,#212108,.T.); +#212106 = VERTEX_POINT('',#212107); +#212107 = CARTESIAN_POINT('',(148.044265,-74.162842,1.51)); +#212108 = LINE('',#212109,#212110); +#212109 = CARTESIAN_POINT('',(148.044265,-74.162842,1.51)); +#212110 = VECTOR('',#212111,1.); +#212111 = DIRECTION('',(0.,0.,1.)); +#212112 = ORIENTED_EDGE('',*,*,#212113,.F.); +#212113 = EDGE_CURVE('',#212075,#212106,#212114,.T.); +#212114 = LINE('',#212115,#212116); +#212115 = CARTESIAN_POINT('',(148.042344,-73.990442,1.51)); +#212116 = VECTOR('',#212117,1.); +#212117 = DIRECTION('',(1.114199974372E-02,-0.999937925994,0.)); +#212118 = PLANE('',#212119); +#212119 = AXIS2_PLACEMENT_3D('',#212120,#212121,#212122); +#212120 = CARTESIAN_POINT('',(148.042344,-73.990442,1.51)); +#212121 = DIRECTION('',(0.999937925994,1.114199974372E-02,-0.)); +#212122 = DIRECTION('',(1.114199974372E-02,-0.999937925994,0.)); +#212123 = ADVANCED_FACE('',(#212124),#212149,.T.); +#212124 = FACE_BOUND('',#212125,.T.); +#212125 = EDGE_LOOP('',(#212126,#212127,#212135,#212143)); +#212126 = ORIENTED_EDGE('',*,*,#212105,.T.); +#212127 = ORIENTED_EDGE('',*,*,#212128,.T.); +#212128 = EDGE_CURVE('',#212098,#212129,#212131,.T.); +#212129 = VERTEX_POINT('',#212130); +#212130 = CARTESIAN_POINT('',(148.337158,-74.455735,1.545)); +#212131 = LINE('',#212132,#212133); +#212132 = CARTESIAN_POINT('',(148.044265,-74.162842,1.545)); +#212133 = VECTOR('',#212134,1.); +#212134 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#212135 = ORIENTED_EDGE('',*,*,#212136,.F.); +#212136 = EDGE_CURVE('',#212137,#212129,#212139,.T.); +#212137 = VERTEX_POINT('',#212138); +#212138 = CARTESIAN_POINT('',(148.337158,-74.455735,1.51)); +#212139 = LINE('',#212140,#212141); +#212140 = CARTESIAN_POINT('',(148.337158,-74.455735,1.51)); +#212141 = VECTOR('',#212142,1.); +#212142 = DIRECTION('',(0.,0.,1.)); +#212143 = ORIENTED_EDGE('',*,*,#212144,.F.); +#212144 = EDGE_CURVE('',#212106,#212137,#212145,.T.); +#212145 = LINE('',#212146,#212147); +#212146 = CARTESIAN_POINT('',(148.044265,-74.162842,1.51)); +#212147 = VECTOR('',#212148,1.); +#212148 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#212149 = PLANE('',#212150); +#212150 = AXIS2_PLACEMENT_3D('',#212151,#212152,#212153); +#212151 = CARTESIAN_POINT('',(148.044265,-74.162842,1.51)); +#212152 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#212153 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#212154 = ADVANCED_FACE('',(#212155),#212180,.T.); +#212155 = FACE_BOUND('',#212156,.T.); +#212156 = EDGE_LOOP('',(#212157,#212158,#212166,#212174)); +#212157 = ORIENTED_EDGE('',*,*,#212136,.T.); +#212158 = ORIENTED_EDGE('',*,*,#212159,.T.); +#212159 = EDGE_CURVE('',#212129,#212160,#212162,.T.); +#212160 = VERTEX_POINT('',#212161); +#212161 = CARTESIAN_POINT('',(149.463774,-74.457656,1.545)); +#212162 = LINE('',#212163,#212164); +#212163 = CARTESIAN_POINT('',(148.337158,-74.455735,1.545)); +#212164 = VECTOR('',#212165,1.); +#212165 = DIRECTION('',(0.999998546309,-1.705103786433E-03,0.)); +#212166 = ORIENTED_EDGE('',*,*,#212167,.F.); +#212167 = EDGE_CURVE('',#212168,#212160,#212170,.T.); +#212168 = VERTEX_POINT('',#212169); +#212169 = CARTESIAN_POINT('',(149.463774,-74.457656,1.51)); +#212170 = LINE('',#212171,#212172); +#212171 = CARTESIAN_POINT('',(149.463774,-74.457656,1.51)); +#212172 = VECTOR('',#212173,1.); +#212173 = DIRECTION('',(0.,0.,1.)); +#212174 = ORIENTED_EDGE('',*,*,#212175,.F.); +#212175 = EDGE_CURVE('',#212137,#212168,#212176,.T.); +#212176 = LINE('',#212177,#212178); +#212177 = CARTESIAN_POINT('',(148.337158,-74.455735,1.51)); +#212178 = VECTOR('',#212179,1.); +#212179 = DIRECTION('',(0.999998546309,-1.705103786433E-03,0.)); +#212180 = PLANE('',#212181); +#212181 = AXIS2_PLACEMENT_3D('',#212182,#212183,#212184); +#212182 = CARTESIAN_POINT('',(148.337158,-74.455735,1.51)); +#212183 = DIRECTION('',(1.705103786433E-03,0.999998546309,-0.)); +#212184 = DIRECTION('',(0.999998546309,-1.705103786433E-03,0.)); +#212185 = ADVANCED_FACE('',(#212186),#212211,.T.); +#212186 = FACE_BOUND('',#212187,.T.); +#212187 = EDGE_LOOP('',(#212188,#212189,#212197,#212205)); +#212188 = ORIENTED_EDGE('',*,*,#212167,.T.); +#212189 = ORIENTED_EDGE('',*,*,#212190,.T.); +#212190 = EDGE_CURVE('',#212160,#212191,#212193,.T.); +#212191 = VERTEX_POINT('',#212192); +#212192 = CARTESIAN_POINT('',(149.499822,-74.472588,1.545)); +#212193 = LINE('',#212194,#212195); +#212194 = CARTESIAN_POINT('',(149.463774,-74.457656,1.545)); +#212195 = VECTOR('',#212196,1.); +#212196 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#212197 = ORIENTED_EDGE('',*,*,#212198,.F.); +#212198 = EDGE_CURVE('',#212199,#212191,#212201,.T.); +#212199 = VERTEX_POINT('',#212200); +#212200 = CARTESIAN_POINT('',(149.499822,-74.472588,1.51)); +#212201 = LINE('',#212202,#212203); +#212202 = CARTESIAN_POINT('',(149.499822,-74.472588,1.51)); +#212203 = VECTOR('',#212204,1.); +#212204 = DIRECTION('',(0.,0.,1.)); +#212205 = ORIENTED_EDGE('',*,*,#212206,.F.); +#212206 = EDGE_CURVE('',#212168,#212199,#212207,.T.); +#212207 = LINE('',#212208,#212209); +#212208 = CARTESIAN_POINT('',(149.463774,-74.457656,1.51)); +#212209 = VECTOR('',#212210,1.); +#212210 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#212211 = PLANE('',#212212); +#212212 = AXIS2_PLACEMENT_3D('',#212213,#212214,#212215); +#212213 = CARTESIAN_POINT('',(149.463774,-74.457656,1.51)); +#212214 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#212215 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#212216 = ADVANCED_FACE('',(#212217),#212242,.T.); +#212217 = FACE_BOUND('',#212218,.T.); +#212218 = EDGE_LOOP('',(#212219,#212220,#212228,#212236)); +#212219 = ORIENTED_EDGE('',*,*,#212198,.T.); +#212220 = ORIENTED_EDGE('',*,*,#212221,.T.); +#212221 = EDGE_CURVE('',#212191,#212222,#212224,.T.); +#212222 = VERTEX_POINT('',#212223); +#212223 = CARTESIAN_POINT('',(149.929951,-74.9,1.545)); +#212224 = LINE('',#212225,#212226); +#212225 = CARTESIAN_POINT('',(149.499822,-74.472588,1.545)); +#212226 = VECTOR('',#212227,1.); +#212227 = DIRECTION('',(0.709343590811,-0.704862873314,0.)); +#212228 = ORIENTED_EDGE('',*,*,#212229,.F.); +#212229 = EDGE_CURVE('',#212230,#212222,#212232,.T.); +#212230 = VERTEX_POINT('',#212231); +#212231 = CARTESIAN_POINT('',(149.929951,-74.9,1.51)); +#212232 = LINE('',#212233,#212234); +#212233 = CARTESIAN_POINT('',(149.929951,-74.9,1.51)); +#212234 = VECTOR('',#212235,1.); +#212235 = DIRECTION('',(0.,0.,1.)); +#212236 = ORIENTED_EDGE('',*,*,#212237,.F.); +#212237 = EDGE_CURVE('',#212199,#212230,#212238,.T.); +#212238 = LINE('',#212239,#212240); +#212239 = CARTESIAN_POINT('',(149.499822,-74.472588,1.51)); +#212240 = VECTOR('',#212241,1.); +#212241 = DIRECTION('',(0.709343590811,-0.704862873314,0.)); +#212242 = PLANE('',#212243); +#212243 = AXIS2_PLACEMENT_3D('',#212244,#212245,#212246); +#212244 = CARTESIAN_POINT('',(149.499822,-74.472588,1.51)); +#212245 = DIRECTION('',(0.704862873314,0.709343590811,-0.)); +#212246 = DIRECTION('',(0.709343590811,-0.704862873314,0.)); +#212247 = ADVANCED_FACE('',(#212248),#212273,.T.); +#212248 = FACE_BOUND('',#212249,.T.); +#212249 = EDGE_LOOP('',(#212250,#212251,#212259,#212267)); +#212250 = ORIENTED_EDGE('',*,*,#212229,.T.); +#212251 = ORIENTED_EDGE('',*,*,#212252,.T.); +#212252 = EDGE_CURVE('',#212222,#212253,#212255,.T.); +#212253 = VERTEX_POINT('',#212254); +#212254 = CARTESIAN_POINT('',(150.218869,-74.9,1.545)); +#212255 = LINE('',#212256,#212257); +#212256 = CARTESIAN_POINT('',(149.929951,-74.9,1.545)); +#212257 = VECTOR('',#212258,1.); +#212258 = DIRECTION('',(1.,0.,0.)); +#212259 = ORIENTED_EDGE('',*,*,#212260,.F.); +#212260 = EDGE_CURVE('',#212261,#212253,#212263,.T.); +#212261 = VERTEX_POINT('',#212262); +#212262 = CARTESIAN_POINT('',(150.218869,-74.9,1.51)); +#212263 = LINE('',#212264,#212265); +#212264 = CARTESIAN_POINT('',(150.218869,-74.9,1.51)); +#212265 = VECTOR('',#212266,1.); +#212266 = DIRECTION('',(0.,0.,1.)); +#212267 = ORIENTED_EDGE('',*,*,#212268,.F.); +#212268 = EDGE_CURVE('',#212230,#212261,#212269,.T.); +#212269 = LINE('',#212270,#212271); +#212270 = CARTESIAN_POINT('',(149.929951,-74.9,1.51)); +#212271 = VECTOR('',#212272,1.); +#212272 = DIRECTION('',(1.,0.,0.)); +#212273 = PLANE('',#212274); +#212274 = AXIS2_PLACEMENT_3D('',#212275,#212276,#212277); +#212275 = CARTESIAN_POINT('',(149.929951,-74.9,1.51)); +#212276 = DIRECTION('',(0.,1.,0.)); +#212277 = DIRECTION('',(1.,0.,0.)); +#212278 = ADVANCED_FACE('',(#212279),#212304,.T.); +#212279 = FACE_BOUND('',#212280,.T.); +#212280 = EDGE_LOOP('',(#212281,#212282,#212290,#212298)); +#212281 = ORIENTED_EDGE('',*,*,#212260,.T.); +#212282 = ORIENTED_EDGE('',*,*,#212283,.T.); +#212283 = EDGE_CURVE('',#212253,#212284,#212286,.T.); +#212284 = VERTEX_POINT('',#212285); +#212285 = CARTESIAN_POINT('',(150.222836,-74.885195,1.545)); +#212286 = LINE('',#212287,#212288); +#212287 = CARTESIAN_POINT('',(150.218869,-74.9,1.545)); +#212288 = VECTOR('',#212289,1.); +#212289 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#212290 = ORIENTED_EDGE('',*,*,#212291,.F.); +#212291 = EDGE_CURVE('',#212292,#212284,#212294,.T.); +#212292 = VERTEX_POINT('',#212293); +#212293 = CARTESIAN_POINT('',(150.222836,-74.885195,1.51)); +#212294 = LINE('',#212295,#212296); +#212295 = CARTESIAN_POINT('',(150.222836,-74.885195,1.51)); +#212296 = VECTOR('',#212297,1.); +#212297 = DIRECTION('',(0.,0.,1.)); +#212298 = ORIENTED_EDGE('',*,*,#212299,.F.); +#212299 = EDGE_CURVE('',#212261,#212292,#212300,.T.); +#212300 = LINE('',#212301,#212302); +#212301 = CARTESIAN_POINT('',(150.218869,-74.9,1.51)); +#212302 = VECTOR('',#212303,1.); +#212303 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#212304 = PLANE('',#212305); +#212305 = AXIS2_PLACEMENT_3D('',#212306,#212307,#212308); +#212306 = CARTESIAN_POINT('',(150.218869,-74.9,1.51)); +#212307 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#212308 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#212309 = ADVANCED_FACE('',(#212310),#212337,.T.); +#212310 = FACE_BOUND('',#212311,.T.); +#212311 = EDGE_LOOP('',(#212312,#212313,#212322,#212330)); +#212312 = ORIENTED_EDGE('',*,*,#212291,.T.); +#212313 = ORIENTED_EDGE('',*,*,#212314,.T.); +#212314 = EDGE_CURVE('',#212284,#212315,#212317,.T.); +#212315 = VERTEX_POINT('',#212316); +#212316 = CARTESIAN_POINT('',(150.222836,-75.114805,1.545)); +#212317 = CIRCLE('',#212318,0.299999850918); +#212318 = AXIS2_PLACEMENT_3D('',#212319,#212320,#212321); +#212319 = CARTESIAN_POINT('',(150.49999971069,-75.,1.545)); +#212320 = DIRECTION('',(0.,0.,-1.)); +#212321 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#212322 = ORIENTED_EDGE('',*,*,#212323,.F.); +#212323 = EDGE_CURVE('',#212324,#212315,#212326,.T.); +#212324 = VERTEX_POINT('',#212325); +#212325 = CARTESIAN_POINT('',(150.222836,-75.114805,1.51)); +#212326 = LINE('',#212327,#212328); +#212327 = CARTESIAN_POINT('',(150.222836,-75.114805,1.51)); +#212328 = VECTOR('',#212329,1.); +#212329 = DIRECTION('',(0.,0.,1.)); +#212330 = ORIENTED_EDGE('',*,*,#212331,.F.); +#212331 = EDGE_CURVE('',#212292,#212324,#212332,.T.); +#212332 = CIRCLE('',#212333,0.299999850918); +#212333 = AXIS2_PLACEMENT_3D('',#212334,#212335,#212336); +#212334 = CARTESIAN_POINT('',(150.49999971069,-75.,1.51)); +#212335 = DIRECTION('',(0.,0.,-1.)); +#212336 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#212337 = CYLINDRICAL_SURFACE('',#212338,0.299999850918); +#212338 = AXIS2_PLACEMENT_3D('',#212339,#212340,#212341); +#212339 = CARTESIAN_POINT('',(150.49999971069,-75.,1.51)); +#212340 = DIRECTION('',(0.,0.,-1.)); +#212341 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#212342 = ADVANCED_FACE('',(#212343),#212368,.T.); +#212343 = FACE_BOUND('',#212344,.T.); +#212344 = EDGE_LOOP('',(#212345,#212346,#212354,#212362)); +#212345 = ORIENTED_EDGE('',*,*,#212323,.T.); +#212346 = ORIENTED_EDGE('',*,*,#212347,.T.); +#212347 = EDGE_CURVE('',#212315,#212348,#212350,.T.); +#212348 = VERTEX_POINT('',#212349); +#212349 = CARTESIAN_POINT('',(150.218869,-75.1,1.545)); +#212350 = LINE('',#212351,#212352); +#212351 = CARTESIAN_POINT('',(150.222836,-75.114805,1.545)); +#212352 = VECTOR('',#212353,1.); +#212353 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#212354 = ORIENTED_EDGE('',*,*,#212355,.F.); +#212355 = EDGE_CURVE('',#212356,#212348,#212358,.T.); +#212356 = VERTEX_POINT('',#212357); +#212357 = CARTESIAN_POINT('',(150.218869,-75.1,1.51)); +#212358 = LINE('',#212359,#212360); +#212359 = CARTESIAN_POINT('',(150.218869,-75.1,1.51)); +#212360 = VECTOR('',#212361,1.); +#212361 = DIRECTION('',(0.,0.,1.)); +#212362 = ORIENTED_EDGE('',*,*,#212363,.F.); +#212363 = EDGE_CURVE('',#212324,#212356,#212364,.T.); +#212364 = LINE('',#212365,#212366); +#212365 = CARTESIAN_POINT('',(150.222836,-75.114805,1.51)); +#212366 = VECTOR('',#212367,1.); +#212367 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#212368 = PLANE('',#212369); +#212369 = AXIS2_PLACEMENT_3D('',#212370,#212371,#212372); +#212370 = CARTESIAN_POINT('',(150.222836,-75.114805,1.51)); +#212371 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#212372 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#212373 = ADVANCED_FACE('',(#212374),#212399,.T.); +#212374 = FACE_BOUND('',#212375,.T.); +#212375 = EDGE_LOOP('',(#212376,#212377,#212385,#212393)); +#212376 = ORIENTED_EDGE('',*,*,#212355,.T.); +#212377 = ORIENTED_EDGE('',*,*,#212378,.T.); +#212378 = EDGE_CURVE('',#212348,#212379,#212381,.T.); +#212379 = VERTEX_POINT('',#212380); +#212380 = CARTESIAN_POINT('',(149.869021,-75.098079,1.545)); +#212381 = LINE('',#212382,#212383); +#212382 = CARTESIAN_POINT('',(150.218869,-75.1,1.545)); +#212383 = VECTOR('',#212384,1.); +#212384 = DIRECTION('',(-0.999984925042,5.490873296405E-03,0.)); +#212385 = ORIENTED_EDGE('',*,*,#212386,.F.); +#212386 = EDGE_CURVE('',#212387,#212379,#212389,.T.); +#212387 = VERTEX_POINT('',#212388); +#212388 = CARTESIAN_POINT('',(149.869021,-75.098079,1.51)); +#212389 = LINE('',#212390,#212391); +#212390 = CARTESIAN_POINT('',(149.869021,-75.098079,1.51)); +#212391 = VECTOR('',#212392,1.); +#212392 = DIRECTION('',(0.,0.,1.)); +#212393 = ORIENTED_EDGE('',*,*,#212394,.F.); +#212394 = EDGE_CURVE('',#212356,#212387,#212395,.T.); +#212395 = LINE('',#212396,#212397); +#212396 = CARTESIAN_POINT('',(150.218869,-75.1,1.51)); +#212397 = VECTOR('',#212398,1.); +#212398 = DIRECTION('',(-0.999984925042,5.490873296405E-03,0.)); +#212399 = PLANE('',#212400); +#212400 = AXIS2_PLACEMENT_3D('',#212401,#212402,#212403); +#212401 = CARTESIAN_POINT('',(150.218869,-75.1,1.51)); +#212402 = DIRECTION('',(-5.490873296405E-03,-0.999984925042,0.)); +#212403 = DIRECTION('',(-0.999984925042,5.490873296405E-03,0.)); +#212404 = ADVANCED_FACE('',(#212405),#212430,.T.); +#212405 = FACE_BOUND('',#212406,.T.); +#212406 = EDGE_LOOP('',(#212407,#212408,#212416,#212424)); +#212407 = ORIENTED_EDGE('',*,*,#212386,.T.); +#212408 = ORIENTED_EDGE('',*,*,#212409,.T.); +#212409 = EDGE_CURVE('',#212379,#212410,#212412,.T.); +#212410 = VERTEX_POINT('',#212411); +#212411 = CARTESIAN_POINT('',(149.832973,-75.083148,1.545)); +#212412 = LINE('',#212413,#212414); +#212413 = CARTESIAN_POINT('',(149.869021,-75.098079,1.545)); +#212414 = VECTOR('',#212415,1.); +#212415 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#212416 = ORIENTED_EDGE('',*,*,#212417,.F.); +#212417 = EDGE_CURVE('',#212418,#212410,#212420,.T.); +#212418 = VERTEX_POINT('',#212419); +#212419 = CARTESIAN_POINT('',(149.832973,-75.083148,1.51)); +#212420 = LINE('',#212421,#212422); +#212421 = CARTESIAN_POINT('',(149.832973,-75.083148,1.51)); +#212422 = VECTOR('',#212423,1.); +#212423 = DIRECTION('',(0.,0.,1.)); +#212424 = ORIENTED_EDGE('',*,*,#212425,.F.); +#212425 = EDGE_CURVE('',#212387,#212418,#212426,.T.); +#212426 = LINE('',#212427,#212428); +#212427 = CARTESIAN_POINT('',(149.869021,-75.098079,1.51)); +#212428 = VECTOR('',#212429,1.); +#212429 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#212430 = PLANE('',#212431); +#212431 = AXIS2_PLACEMENT_3D('',#212432,#212433,#212434); +#212432 = CARTESIAN_POINT('',(149.869021,-75.098079,1.51)); +#212433 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#212434 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#212435 = ADVANCED_FACE('',(#212436),#212461,.T.); +#212436 = FACE_BOUND('',#212437,.T.); +#212437 = EDGE_LOOP('',(#212438,#212439,#212447,#212455)); +#212438 = ORIENTED_EDGE('',*,*,#212417,.T.); +#212439 = ORIENTED_EDGE('',*,*,#212440,.T.); +#212440 = EDGE_CURVE('',#212410,#212441,#212443,.T.); +#212441 = VERTEX_POINT('',#212442); +#212442 = CARTESIAN_POINT('',(149.402843,-74.655735,1.545)); +#212443 = LINE('',#212444,#212445); +#212444 = CARTESIAN_POINT('',(149.832973,-75.083148,1.545)); +#212445 = VECTOR('',#212446,1.); +#212446 = DIRECTION('',(-0.709343585602,0.704862878555,0.)); +#212447 = ORIENTED_EDGE('',*,*,#212448,.F.); +#212448 = EDGE_CURVE('',#212449,#212441,#212451,.T.); +#212449 = VERTEX_POINT('',#212450); +#212450 = CARTESIAN_POINT('',(149.402843,-74.655735,1.51)); +#212451 = LINE('',#212452,#212453); +#212452 = CARTESIAN_POINT('',(149.402843,-74.655735,1.51)); +#212453 = VECTOR('',#212454,1.); +#212454 = DIRECTION('',(0.,0.,1.)); +#212455 = ORIENTED_EDGE('',*,*,#212456,.F.); +#212456 = EDGE_CURVE('',#212418,#212449,#212457,.T.); +#212457 = LINE('',#212458,#212459); +#212458 = CARTESIAN_POINT('',(149.832973,-75.083148,1.51)); +#212459 = VECTOR('',#212460,1.); +#212460 = DIRECTION('',(-0.709343585602,0.704862878555,0.)); +#212461 = PLANE('',#212462); +#212462 = AXIS2_PLACEMENT_3D('',#212463,#212464,#212465); +#212463 = CARTESIAN_POINT('',(149.832973,-75.083148,1.51)); +#212464 = DIRECTION('',(-0.704862878555,-0.709343585602,0.)); +#212465 = DIRECTION('',(-0.709343585602,0.704862878555,0.)); +#212466 = ADVANCED_FACE('',(#212467),#212492,.T.); +#212467 = FACE_BOUND('',#212468,.T.); +#212468 = EDGE_LOOP('',(#212469,#212470,#212478,#212486)); +#212469 = ORIENTED_EDGE('',*,*,#212448,.T.); +#212470 = ORIENTED_EDGE('',*,*,#212471,.T.); +#212471 = EDGE_CURVE('',#212441,#212472,#212474,.T.); +#212472 = VERTEX_POINT('',#212473); +#212473 = CARTESIAN_POINT('',(148.276227,-74.653814,1.545)); +#212474 = LINE('',#212475,#212476); +#212475 = CARTESIAN_POINT('',(149.402843,-74.655735,1.545)); +#212476 = VECTOR('',#212477,1.); +#212477 = DIRECTION('',(-0.999998546309,1.705103786446E-03,0.)); +#212478 = ORIENTED_EDGE('',*,*,#212479,.F.); +#212479 = EDGE_CURVE('',#212480,#212472,#212482,.T.); +#212480 = VERTEX_POINT('',#212481); +#212481 = CARTESIAN_POINT('',(148.276227,-74.653814,1.51)); +#212482 = LINE('',#212483,#212484); +#212483 = CARTESIAN_POINT('',(148.276227,-74.653814,1.51)); +#212484 = VECTOR('',#212485,1.); +#212485 = DIRECTION('',(0.,0.,1.)); +#212486 = ORIENTED_EDGE('',*,*,#212487,.F.); +#212487 = EDGE_CURVE('',#212449,#212480,#212488,.T.); +#212488 = LINE('',#212489,#212490); +#212489 = CARTESIAN_POINT('',(149.402843,-74.655735,1.51)); +#212490 = VECTOR('',#212491,1.); +#212491 = DIRECTION('',(-0.999998546309,1.705103786446E-03,0.)); +#212492 = PLANE('',#212493); +#212493 = AXIS2_PLACEMENT_3D('',#212494,#212495,#212496); +#212494 = CARTESIAN_POINT('',(149.402843,-74.655735,1.51)); +#212495 = DIRECTION('',(-1.705103786446E-03,-0.999998546309,0.)); +#212496 = DIRECTION('',(-0.999998546309,1.705103786446E-03,0.)); +#212497 = ADVANCED_FACE('',(#212498),#212523,.T.); +#212498 = FACE_BOUND('',#212499,.T.); +#212499 = EDGE_LOOP('',(#212500,#212501,#212509,#212517)); +#212500 = ORIENTED_EDGE('',*,*,#212479,.T.); +#212501 = ORIENTED_EDGE('',*,*,#212502,.T.); +#212502 = EDGE_CURVE('',#212472,#212503,#212505,.T.); +#212503 = VERTEX_POINT('',#212504); +#212504 = CARTESIAN_POINT('',(148.240179,-74.638882,1.545)); +#212505 = LINE('',#212506,#212507); +#212506 = CARTESIAN_POINT('',(148.276227,-74.653814,1.545)); +#212507 = VECTOR('',#212508,1.); +#212508 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#212509 = ORIENTED_EDGE('',*,*,#212510,.F.); +#212510 = EDGE_CURVE('',#212511,#212503,#212513,.T.); +#212511 = VERTEX_POINT('',#212512); +#212512 = CARTESIAN_POINT('',(148.240179,-74.638882,1.51)); +#212513 = LINE('',#212514,#212515); +#212514 = CARTESIAN_POINT('',(148.240179,-74.638882,1.51)); +#212515 = VECTOR('',#212516,1.); +#212516 = DIRECTION('',(0.,0.,1.)); +#212517 = ORIENTED_EDGE('',*,*,#212518,.F.); +#212518 = EDGE_CURVE('',#212480,#212511,#212519,.T.); +#212519 = LINE('',#212520,#212521); +#212520 = CARTESIAN_POINT('',(148.276227,-74.653814,1.51)); +#212521 = VECTOR('',#212522,1.); +#212522 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#212523 = PLANE('',#212524); +#212524 = AXIS2_PLACEMENT_3D('',#212525,#212526,#212527); +#212525 = CARTESIAN_POINT('',(148.276227,-74.653814,1.51)); +#212526 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#212527 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#212528 = ADVANCED_FACE('',(#212529),#212554,.T.); +#212529 = FACE_BOUND('',#212530,.T.); +#212530 = EDGE_LOOP('',(#212531,#212532,#212540,#212548)); +#212531 = ORIENTED_EDGE('',*,*,#212510,.T.); +#212532 = ORIENTED_EDGE('',*,*,#212533,.T.); +#212533 = EDGE_CURVE('',#212503,#212534,#212536,.T.); +#212534 = VERTEX_POINT('',#212535); +#212535 = CARTESIAN_POINT('',(147.861118,-74.259821,1.545)); +#212536 = LINE('',#212537,#212538); +#212537 = CARTESIAN_POINT('',(148.240179,-74.638882,1.545)); +#212538 = VECTOR('',#212539,1.); +#212539 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#212540 = ORIENTED_EDGE('',*,*,#212541,.F.); +#212541 = EDGE_CURVE('',#212542,#212534,#212544,.T.); +#212542 = VERTEX_POINT('',#212543); +#212543 = CARTESIAN_POINT('',(147.861118,-74.259821,1.51)); +#212544 = LINE('',#212545,#212546); +#212545 = CARTESIAN_POINT('',(147.861118,-74.259821,1.51)); +#212546 = VECTOR('',#212547,1.); +#212547 = DIRECTION('',(0.,0.,1.)); +#212548 = ORIENTED_EDGE('',*,*,#212549,.F.); +#212549 = EDGE_CURVE('',#212511,#212542,#212550,.T.); +#212550 = LINE('',#212551,#212552); +#212551 = CARTESIAN_POINT('',(148.240179,-74.638882,1.51)); +#212552 = VECTOR('',#212553,1.); +#212553 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#212554 = PLANE('',#212555); +#212555 = AXIS2_PLACEMENT_3D('',#212556,#212557,#212558); +#212556 = CARTESIAN_POINT('',(148.240179,-74.638882,1.51)); +#212557 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#212558 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#212559 = ADVANCED_FACE('',(#212560),#212585,.T.); +#212560 = FACE_BOUND('',#212561,.T.); +#212561 = EDGE_LOOP('',(#212562,#212563,#212571,#212579)); +#212562 = ORIENTED_EDGE('',*,*,#212541,.T.); +#212563 = ORIENTED_EDGE('',*,*,#212564,.T.); +#212564 = EDGE_CURVE('',#212534,#212565,#212567,.T.); +#212565 = VERTEX_POINT('',#212566); +#212566 = CARTESIAN_POINT('',(147.846186,-74.223773,1.545)); +#212567 = LINE('',#212568,#212569); +#212568 = CARTESIAN_POINT('',(147.861118,-74.259821,1.545)); +#212569 = VECTOR('',#212570,1.); +#212570 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212571 = ORIENTED_EDGE('',*,*,#212572,.F.); +#212572 = EDGE_CURVE('',#212573,#212565,#212575,.T.); +#212573 = VERTEX_POINT('',#212574); +#212574 = CARTESIAN_POINT('',(147.846186,-74.223773,1.51)); +#212575 = LINE('',#212576,#212577); +#212576 = CARTESIAN_POINT('',(147.846186,-74.223773,1.51)); +#212577 = VECTOR('',#212578,1.); +#212578 = DIRECTION('',(0.,0.,1.)); +#212579 = ORIENTED_EDGE('',*,*,#212580,.F.); +#212580 = EDGE_CURVE('',#212542,#212573,#212581,.T.); +#212581 = LINE('',#212582,#212583); +#212582 = CARTESIAN_POINT('',(147.861118,-74.259821,1.51)); +#212583 = VECTOR('',#212584,1.); +#212584 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212585 = PLANE('',#212586); +#212586 = AXIS2_PLACEMENT_3D('',#212587,#212588,#212589); +#212587 = CARTESIAN_POINT('',(147.861118,-74.259821,1.51)); +#212588 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#212589 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212590 = ADVANCED_FACE('',(#212591),#212616,.T.); +#212591 = FACE_BOUND('',#212592,.T.); +#212592 = EDGE_LOOP('',(#212593,#212594,#212602,#212610)); +#212593 = ORIENTED_EDGE('',*,*,#212572,.T.); +#212594 = ORIENTED_EDGE('',*,*,#212595,.T.); +#212595 = EDGE_CURVE('',#212565,#212596,#212598,.T.); +#212596 = VERTEX_POINT('',#212597); +#212597 = CARTESIAN_POINT('',(147.844265,-74.051373,1.545)); +#212598 = LINE('',#212599,#212600); +#212599 = CARTESIAN_POINT('',(147.846186,-74.223773,1.545)); +#212600 = VECTOR('',#212601,1.); +#212601 = DIRECTION('',(-1.114199974372E-02,0.999937925994,0.)); +#212602 = ORIENTED_EDGE('',*,*,#212603,.F.); +#212603 = EDGE_CURVE('',#212604,#212596,#212606,.T.); +#212604 = VERTEX_POINT('',#212605); +#212605 = CARTESIAN_POINT('',(147.844265,-74.051373,1.51)); +#212606 = LINE('',#212607,#212608); +#212607 = CARTESIAN_POINT('',(147.844265,-74.051373,1.51)); +#212608 = VECTOR('',#212609,1.); +#212609 = DIRECTION('',(0.,0.,1.)); +#212610 = ORIENTED_EDGE('',*,*,#212611,.F.); +#212611 = EDGE_CURVE('',#212573,#212604,#212612,.T.); +#212612 = LINE('',#212613,#212614); +#212613 = CARTESIAN_POINT('',(147.846186,-74.223773,1.51)); +#212614 = VECTOR('',#212615,1.); +#212615 = DIRECTION('',(-1.114199974372E-02,0.999937925994,0.)); +#212616 = PLANE('',#212617); +#212617 = AXIS2_PLACEMENT_3D('',#212618,#212619,#212620); +#212618 = CARTESIAN_POINT('',(147.846186,-74.223773,1.51)); +#212619 = DIRECTION('',(-0.999937925994,-1.114199974372E-02,0.)); +#212620 = DIRECTION('',(-1.114199974372E-02,0.999937925994,0.)); +#212621 = ADVANCED_FACE('',(#212622),#212647,.T.); +#212622 = FACE_BOUND('',#212623,.T.); +#212623 = EDGE_LOOP('',(#212624,#212625,#212633,#212641)); +#212624 = ORIENTED_EDGE('',*,*,#212603,.T.); +#212625 = ORIENTED_EDGE('',*,*,#212626,.T.); +#212626 = EDGE_CURVE('',#212596,#212627,#212629,.T.); +#212627 = VERTEX_POINT('',#212628); +#212628 = CARTESIAN_POINT('',(147.516853,-73.721243,1.545)); +#212629 = LINE('',#212630,#212631); +#212630 = CARTESIAN_POINT('',(147.844265,-74.051373,1.545)); +#212631 = VECTOR('',#212632,1.); +#212632 = DIRECTION('',(-0.704177885458,0.710023595123,0.)); +#212633 = ORIENTED_EDGE('',*,*,#212634,.F.); +#212634 = EDGE_CURVE('',#212635,#212627,#212637,.T.); +#212635 = VERTEX_POINT('',#212636); +#212636 = CARTESIAN_POINT('',(147.516853,-73.721243,1.51)); +#212637 = LINE('',#212638,#212639); +#212638 = CARTESIAN_POINT('',(147.516853,-73.721243,1.51)); +#212639 = VECTOR('',#212640,1.); +#212640 = DIRECTION('',(0.,0.,1.)); +#212641 = ORIENTED_EDGE('',*,*,#212642,.F.); +#212642 = EDGE_CURVE('',#212604,#212635,#212643,.T.); +#212643 = LINE('',#212644,#212645); +#212644 = CARTESIAN_POINT('',(147.844265,-74.051373,1.51)); +#212645 = VECTOR('',#212646,1.); +#212646 = DIRECTION('',(-0.704177885458,0.710023595123,0.)); +#212647 = PLANE('',#212648); +#212648 = AXIS2_PLACEMENT_3D('',#212649,#212650,#212651); +#212649 = CARTESIAN_POINT('',(147.844265,-74.051373,1.51)); +#212650 = DIRECTION('',(-0.710023595123,-0.704177885458,0.)); +#212651 = DIRECTION('',(-0.704177885458,0.710023595123,0.)); +#212652 = ADVANCED_FACE('',(#212653),#212678,.T.); +#212653 = FACE_BOUND('',#212654,.T.); +#212654 = EDGE_LOOP('',(#212655,#212656,#212664,#212672)); +#212655 = ORIENTED_EDGE('',*,*,#212634,.T.); +#212656 = ORIENTED_EDGE('',*,*,#212657,.T.); +#212657 = EDGE_CURVE('',#212627,#212658,#212660,.T.); +#212658 = VERTEX_POINT('',#212659); +#212659 = CARTESIAN_POINT('',(147.501921,-73.685195,1.545)); +#212660 = LINE('',#212661,#212662); +#212661 = CARTESIAN_POINT('',(147.516853,-73.721243,1.545)); +#212662 = VECTOR('',#212663,1.); +#212663 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212664 = ORIENTED_EDGE('',*,*,#212665,.F.); +#212665 = EDGE_CURVE('',#212666,#212658,#212668,.T.); +#212666 = VERTEX_POINT('',#212667); +#212667 = CARTESIAN_POINT('',(147.501921,-73.685195,1.51)); +#212668 = LINE('',#212669,#212670); +#212669 = CARTESIAN_POINT('',(147.501921,-73.685195,1.51)); +#212670 = VECTOR('',#212671,1.); +#212671 = DIRECTION('',(0.,0.,1.)); +#212672 = ORIENTED_EDGE('',*,*,#212673,.F.); +#212673 = EDGE_CURVE('',#212635,#212666,#212674,.T.); +#212674 = LINE('',#212675,#212676); +#212675 = CARTESIAN_POINT('',(147.516853,-73.721243,1.51)); +#212676 = VECTOR('',#212677,1.); +#212677 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212678 = PLANE('',#212679); +#212679 = AXIS2_PLACEMENT_3D('',#212680,#212681,#212682); +#212680 = CARTESIAN_POINT('',(147.516853,-73.721243,1.51)); +#212681 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#212682 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#212683 = ADVANCED_FACE('',(#212684),#212709,.T.); +#212684 = FACE_BOUND('',#212685,.T.); +#212685 = EDGE_LOOP('',(#212686,#212687,#212695,#212703)); +#212686 = ORIENTED_EDGE('',*,*,#212665,.T.); +#212687 = ORIENTED_EDGE('',*,*,#212688,.T.); +#212688 = EDGE_CURVE('',#212658,#212689,#212691,.T.); +#212689 = VERTEX_POINT('',#212690); +#212690 = CARTESIAN_POINT('',(147.5,-73.64,1.545)); +#212691 = LINE('',#212692,#212693); +#212692 = CARTESIAN_POINT('',(147.501921,-73.685195,1.545)); +#212693 = VECTOR('',#212694,1.); +#212694 = DIRECTION('',(-4.246635824208E-02,0.999097897314,0.)); +#212695 = ORIENTED_EDGE('',*,*,#212696,.F.); +#212696 = EDGE_CURVE('',#212697,#212689,#212699,.T.); +#212697 = VERTEX_POINT('',#212698); +#212698 = CARTESIAN_POINT('',(147.5,-73.64,1.51)); +#212699 = LINE('',#212700,#212701); +#212700 = CARTESIAN_POINT('',(147.5,-73.64,1.51)); +#212701 = VECTOR('',#212702,1.); +#212702 = DIRECTION('',(0.,0.,1.)); +#212703 = ORIENTED_EDGE('',*,*,#212704,.F.); +#212704 = EDGE_CURVE('',#212666,#212697,#212705,.T.); +#212705 = LINE('',#212706,#212707); +#212706 = CARTESIAN_POINT('',(147.501921,-73.685195,1.51)); +#212707 = VECTOR('',#212708,1.); +#212708 = DIRECTION('',(-4.246635824208E-02,0.999097897314,0.)); +#212709 = PLANE('',#212710); +#212710 = AXIS2_PLACEMENT_3D('',#212711,#212712,#212713); +#212711 = CARTESIAN_POINT('',(147.501921,-73.685195,1.51)); +#212712 = DIRECTION('',(-0.999097897314,-4.246635824208E-02,0.)); +#212713 = DIRECTION('',(-4.246635824208E-02,0.999097897314,0.)); +#212714 = ADVANCED_FACE('',(#212715),#212731,.T.); +#212715 = FACE_BOUND('',#212716,.T.); +#212716 = EDGE_LOOP('',(#212717,#212718,#212724,#212725)); +#212717 = ORIENTED_EDGE('',*,*,#212696,.T.); +#212718 = ORIENTED_EDGE('',*,*,#212719,.T.); +#212719 = EDGE_CURVE('',#212689,#211900,#212720,.T.); +#212720 = LINE('',#212721,#212722); +#212721 = CARTESIAN_POINT('',(147.5,-73.64,1.545)); +#212722 = VECTOR('',#212723,1.); +#212723 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#212724 = ORIENTED_EDGE('',*,*,#211897,.F.); +#212725 = ORIENTED_EDGE('',*,*,#212726,.F.); +#212726 = EDGE_CURVE('',#212697,#211898,#212727,.T.); +#212727 = LINE('',#212728,#212729); +#212728 = CARTESIAN_POINT('',(147.5,-73.64,1.51)); +#212729 = VECTOR('',#212730,1.); +#212730 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#212731 = PLANE('',#212732); +#212732 = AXIS2_PLACEMENT_3D('',#212733,#212734,#212735); +#212733 = CARTESIAN_POINT('',(147.5,-73.64,1.51)); +#212734 = DIRECTION('',(-2.496389274446E-03,-0.999996884015,0.)); +#212735 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#212736 = ADVANCED_FACE('',(#212737),#212764,.F.); +#212737 = FACE_BOUND('',#212738,.T.); +#212738 = EDGE_LOOP('',(#212739,#212749,#212756,#212757)); +#212739 = ORIENTED_EDGE('',*,*,#212740,.T.); +#212740 = EDGE_CURVE('',#212741,#212743,#212745,.T.); +#212741 = VERTEX_POINT('',#212742); +#212742 = CARTESIAN_POINT('',(150.637255,-75.,1.51)); +#212743 = VERTEX_POINT('',#212744); +#212744 = CARTESIAN_POINT('',(150.637255,-75.,1.545)); +#212745 = LINE('',#212746,#212747); +#212746 = CARTESIAN_POINT('',(150.637255,-75.,1.51)); +#212747 = VECTOR('',#212748,1.); +#212748 = DIRECTION('',(0.,0.,1.)); +#212749 = ORIENTED_EDGE('',*,*,#212750,.T.); +#212750 = EDGE_CURVE('',#212743,#212743,#212751,.T.); +#212751 = CIRCLE('',#212752,0.137255); +#212752 = AXIS2_PLACEMENT_3D('',#212753,#212754,#212755); +#212753 = CARTESIAN_POINT('',(150.5,-75.,1.545)); +#212754 = DIRECTION('',(0.,0.,1.)); +#212755 = DIRECTION('',(1.,0.,-0.)); +#212756 = ORIENTED_EDGE('',*,*,#212740,.F.); +#212757 = ORIENTED_EDGE('',*,*,#212758,.F.); +#212758 = EDGE_CURVE('',#212741,#212741,#212759,.T.); +#212759 = CIRCLE('',#212760,0.137255); +#212760 = AXIS2_PLACEMENT_3D('',#212761,#212762,#212763); +#212761 = CARTESIAN_POINT('',(150.5,-75.,1.51)); +#212762 = DIRECTION('',(0.,0.,1.)); +#212763 = DIRECTION('',(1.,0.,-0.)); +#212764 = CYLINDRICAL_SURFACE('',#212765,0.137255); +#212765 = AXIS2_PLACEMENT_3D('',#212766,#212767,#212768); +#212766 = CARTESIAN_POINT('',(150.5,-75.,1.51)); +#212767 = DIRECTION('',(-0.,-0.,-1.)); +#212768 = DIRECTION('',(1.,0.,-0.)); +#212769 = ADVANCED_FACE('',(#212770,#212799),#212802,.F.); +#212770 = FACE_BOUND('',#212771,.T.); +#212771 = EDGE_LOOP('',(#212772,#212773,#212774,#212775,#212776,#212777, + #212778,#212779,#212780,#212781,#212782,#212783,#212784,#212785, + #212786,#212787,#212788,#212789,#212790,#212791,#212792,#212793, + #212794,#212795,#212796,#212797,#212798)); +#212772 = ORIENTED_EDGE('',*,*,#211924,.T.); +#212773 = ORIENTED_EDGE('',*,*,#211956,.T.); +#212774 = ORIENTED_EDGE('',*,*,#211988,.T.); +#212775 = ORIENTED_EDGE('',*,*,#212020,.T.); +#212776 = ORIENTED_EDGE('',*,*,#212051,.T.); +#212777 = ORIENTED_EDGE('',*,*,#212082,.T.); +#212778 = ORIENTED_EDGE('',*,*,#212113,.T.); +#212779 = ORIENTED_EDGE('',*,*,#212144,.T.); +#212780 = ORIENTED_EDGE('',*,*,#212175,.T.); +#212781 = ORIENTED_EDGE('',*,*,#212206,.T.); +#212782 = ORIENTED_EDGE('',*,*,#212237,.T.); +#212783 = ORIENTED_EDGE('',*,*,#212268,.T.); +#212784 = ORIENTED_EDGE('',*,*,#212299,.T.); +#212785 = ORIENTED_EDGE('',*,*,#212331,.T.); +#212786 = ORIENTED_EDGE('',*,*,#212363,.T.); +#212787 = ORIENTED_EDGE('',*,*,#212394,.T.); +#212788 = ORIENTED_EDGE('',*,*,#212425,.T.); +#212789 = ORIENTED_EDGE('',*,*,#212456,.T.); +#212790 = ORIENTED_EDGE('',*,*,#212487,.T.); +#212791 = ORIENTED_EDGE('',*,*,#212518,.T.); +#212792 = ORIENTED_EDGE('',*,*,#212549,.T.); +#212793 = ORIENTED_EDGE('',*,*,#212580,.T.); +#212794 = ORIENTED_EDGE('',*,*,#212611,.T.); +#212795 = ORIENTED_EDGE('',*,*,#212642,.T.); +#212796 = ORIENTED_EDGE('',*,*,#212673,.T.); +#212797 = ORIENTED_EDGE('',*,*,#212704,.T.); +#212798 = ORIENTED_EDGE('',*,*,#212726,.T.); +#212799 = FACE_BOUND('',#212800,.T.); +#212800 = EDGE_LOOP('',(#212801)); +#212801 = ORIENTED_EDGE('',*,*,#212758,.T.); +#212802 = PLANE('',#212803); +#212803 = AXIS2_PLACEMENT_3D('',#212804,#212805,#212806); +#212804 = CARTESIAN_POINT('',(0.,0.,1.51)); +#212805 = DIRECTION('',(0.,0.,1.)); +#212806 = DIRECTION('',(1.,0.,-0.)); +#212807 = ADVANCED_FACE('',(#212808,#212837),#212840,.T.); +#212808 = FACE_BOUND('',#212809,.F.); +#212809 = EDGE_LOOP('',(#212810,#212811,#212812,#212813,#212814,#212815, + #212816,#212817,#212818,#212819,#212820,#212821,#212822,#212823, + #212824,#212825,#212826,#212827,#212828,#212829,#212830,#212831, + #212832,#212833,#212834,#212835,#212836)); +#212810 = ORIENTED_EDGE('',*,*,#211907,.T.); +#212811 = ORIENTED_EDGE('',*,*,#211940,.T.); +#212812 = ORIENTED_EDGE('',*,*,#211971,.T.); +#212813 = ORIENTED_EDGE('',*,*,#212004,.T.); +#212814 = ORIENTED_EDGE('',*,*,#212035,.T.); +#212815 = ORIENTED_EDGE('',*,*,#212066,.T.); +#212816 = ORIENTED_EDGE('',*,*,#212097,.T.); +#212817 = ORIENTED_EDGE('',*,*,#212128,.T.); +#212818 = ORIENTED_EDGE('',*,*,#212159,.T.); +#212819 = ORIENTED_EDGE('',*,*,#212190,.T.); +#212820 = ORIENTED_EDGE('',*,*,#212221,.T.); +#212821 = ORIENTED_EDGE('',*,*,#212252,.T.); +#212822 = ORIENTED_EDGE('',*,*,#212283,.T.); +#212823 = ORIENTED_EDGE('',*,*,#212314,.T.); +#212824 = ORIENTED_EDGE('',*,*,#212347,.T.); +#212825 = ORIENTED_EDGE('',*,*,#212378,.T.); +#212826 = ORIENTED_EDGE('',*,*,#212409,.T.); +#212827 = ORIENTED_EDGE('',*,*,#212440,.T.); +#212828 = ORIENTED_EDGE('',*,*,#212471,.T.); +#212829 = ORIENTED_EDGE('',*,*,#212502,.T.); +#212830 = ORIENTED_EDGE('',*,*,#212533,.T.); +#212831 = ORIENTED_EDGE('',*,*,#212564,.T.); +#212832 = ORIENTED_EDGE('',*,*,#212595,.T.); +#212833 = ORIENTED_EDGE('',*,*,#212626,.T.); +#212834 = ORIENTED_EDGE('',*,*,#212657,.T.); +#212835 = ORIENTED_EDGE('',*,*,#212688,.T.); +#212836 = ORIENTED_EDGE('',*,*,#212719,.T.); +#212837 = FACE_BOUND('',#212838,.F.); +#212838 = EDGE_LOOP('',(#212839)); +#212839 = ORIENTED_EDGE('',*,*,#212750,.T.); +#212840 = PLANE('',#212841); +#212841 = AXIS2_PLACEMENT_3D('',#212842,#212843,#212844); +#212842 = CARTESIAN_POINT('',(0.,0.,1.545)); +#212843 = DIRECTION('',(0.,0.,1.)); +#212844 = DIRECTION('',(1.,0.,-0.)); +#212845 = MANIFOLD_SOLID_BREP('',#212846); +#212846 = CLOSED_SHELL('',(#212847,#212887,#212918,#212949,#212980, + #213011,#213042,#213075,#213106,#213137,#213168,#213199,#213230, + #213263,#213285,#213318,#213351,#213379)); +#212847 = ADVANCED_FACE('',(#212848),#212882,.F.); +#212848 = FACE_BOUND('',#212849,.F.); +#212849 = EDGE_LOOP('',(#212850,#212860,#212868,#212876)); +#212850 = ORIENTED_EDGE('',*,*,#212851,.T.); +#212851 = EDGE_CURVE('',#212852,#212854,#212856,.T.); +#212852 = VERTEX_POINT('',#212853); +#212853 = CARTESIAN_POINT('',(150.7695,-75.128078,0.)); +#212854 = VERTEX_POINT('',#212855); +#212855 = CARTESIAN_POINT('',(150.7695,-75.128078,-3.5E-02)); +#212856 = LINE('',#212857,#212858); +#212857 = CARTESIAN_POINT('',(150.7695,-75.128078,0.)); +#212858 = VECTOR('',#212859,1.); +#212859 = DIRECTION('',(0.,0.,-1.)); +#212860 = ORIENTED_EDGE('',*,*,#212861,.T.); +#212861 = EDGE_CURVE('',#212854,#212862,#212864,.T.); +#212862 = VERTEX_POINT('',#212863); +#212863 = CARTESIAN_POINT('',(151.483147,-75.844443,-3.5E-02)); +#212864 = LINE('',#212865,#212866); +#212865 = CARTESIAN_POINT('',(150.7695,-75.128078,-3.5E-02)); +#212866 = VECTOR('',#212867,1.); +#212867 = DIRECTION('',(0.705761520285,-0.708449487603,0.)); +#212868 = ORIENTED_EDGE('',*,*,#212869,.F.); +#212869 = EDGE_CURVE('',#212870,#212862,#212872,.T.); +#212870 = VERTEX_POINT('',#212871); +#212871 = CARTESIAN_POINT('',(151.483147,-75.844443,0.)); +#212872 = LINE('',#212873,#212874); +#212873 = CARTESIAN_POINT('',(151.483147,-75.844443,0.)); +#212874 = VECTOR('',#212875,1.); +#212875 = DIRECTION('',(0.,0.,-1.)); +#212876 = ORIENTED_EDGE('',*,*,#212877,.F.); +#212877 = EDGE_CURVE('',#212852,#212870,#212878,.T.); +#212878 = LINE('',#212879,#212880); +#212879 = CARTESIAN_POINT('',(150.7695,-75.128078,0.)); +#212880 = VECTOR('',#212881,1.); +#212881 = DIRECTION('',(0.705761520285,-0.708449487603,0.)); +#212882 = PLANE('',#212883); +#212883 = AXIS2_PLACEMENT_3D('',#212884,#212885,#212886); +#212884 = CARTESIAN_POINT('',(150.7695,-75.128078,0.)); +#212885 = DIRECTION('',(-0.708449487603,-0.705761520285,-0.)); +#212886 = DIRECTION('',(0.705761520285,-0.708449487603,0.)); +#212887 = ADVANCED_FACE('',(#212888),#212913,.F.); +#212888 = FACE_BOUND('',#212889,.F.); +#212889 = EDGE_LOOP('',(#212890,#212891,#212899,#212907)); +#212890 = ORIENTED_EDGE('',*,*,#212869,.T.); +#212891 = ORIENTED_EDGE('',*,*,#212892,.T.); +#212892 = EDGE_CURVE('',#212862,#212893,#212895,.T.); +#212893 = VERTEX_POINT('',#212894); +#212894 = CARTESIAN_POINT('',(151.498079,-75.880491,-3.5E-02)); +#212895 = LINE('',#212896,#212897); +#212896 = CARTESIAN_POINT('',(151.483147,-75.844443,-3.5E-02)); +#212897 = VECTOR('',#212898,1.); +#212898 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212899 = ORIENTED_EDGE('',*,*,#212900,.F.); +#212900 = EDGE_CURVE('',#212901,#212893,#212903,.T.); +#212901 = VERTEX_POINT('',#212902); +#212902 = CARTESIAN_POINT('',(151.498079,-75.880491,0.)); +#212903 = LINE('',#212904,#212905); +#212904 = CARTESIAN_POINT('',(151.498079,-75.880491,0.)); +#212905 = VECTOR('',#212906,1.); +#212906 = DIRECTION('',(0.,0.,-1.)); +#212907 = ORIENTED_EDGE('',*,*,#212908,.F.); +#212908 = EDGE_CURVE('',#212870,#212901,#212909,.T.); +#212909 = LINE('',#212910,#212911); +#212910 = CARTESIAN_POINT('',(151.483147,-75.844443,0.)); +#212911 = VECTOR('',#212912,1.); +#212912 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212913 = PLANE('',#212914); +#212914 = AXIS2_PLACEMENT_3D('',#212915,#212916,#212917); +#212915 = CARTESIAN_POINT('',(151.483147,-75.844443,0.)); +#212916 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#212917 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#212918 = ADVANCED_FACE('',(#212919),#212944,.F.); +#212919 = FACE_BOUND('',#212920,.F.); +#212920 = EDGE_LOOP('',(#212921,#212922,#212930,#212938)); +#212921 = ORIENTED_EDGE('',*,*,#212900,.T.); +#212922 = ORIENTED_EDGE('',*,*,#212923,.T.); +#212923 = EDGE_CURVE('',#212893,#212924,#212926,.T.); +#212924 = VERTEX_POINT('',#212925); +#212925 = CARTESIAN_POINT('',(151.498079,-84.619509,-3.5E-02)); +#212926 = LINE('',#212927,#212928); +#212927 = CARTESIAN_POINT('',(151.498079,-75.880491,-3.5E-02)); +#212928 = VECTOR('',#212929,1.); +#212929 = DIRECTION('',(0.,-1.,0.)); +#212930 = ORIENTED_EDGE('',*,*,#212931,.F.); +#212931 = EDGE_CURVE('',#212932,#212924,#212934,.T.); +#212932 = VERTEX_POINT('',#212933); +#212933 = CARTESIAN_POINT('',(151.498079,-84.619509,0.)); +#212934 = LINE('',#212935,#212936); +#212935 = CARTESIAN_POINT('',(151.498079,-84.619509,0.)); +#212936 = VECTOR('',#212937,1.); +#212937 = DIRECTION('',(0.,0.,-1.)); +#212938 = ORIENTED_EDGE('',*,*,#212939,.F.); +#212939 = EDGE_CURVE('',#212901,#212932,#212940,.T.); +#212940 = LINE('',#212941,#212942); +#212941 = CARTESIAN_POINT('',(151.498079,-75.880491,0.)); +#212942 = VECTOR('',#212943,1.); +#212943 = DIRECTION('',(0.,-1.,0.)); +#212944 = PLANE('',#212945); +#212945 = AXIS2_PLACEMENT_3D('',#212946,#212947,#212948); +#212946 = CARTESIAN_POINT('',(151.498079,-75.880491,0.)); +#212947 = DIRECTION('',(-1.,-0.,-0.)); +#212948 = DIRECTION('',(0.,-1.,0.)); +#212949 = ADVANCED_FACE('',(#212950),#212975,.F.); +#212950 = FACE_BOUND('',#212951,.F.); +#212951 = EDGE_LOOP('',(#212952,#212953,#212961,#212969)); +#212952 = ORIENTED_EDGE('',*,*,#212931,.T.); +#212953 = ORIENTED_EDGE('',*,*,#212954,.T.); +#212954 = EDGE_CURVE('',#212924,#212955,#212957,.T.); +#212955 = VERTEX_POINT('',#212956); +#212956 = CARTESIAN_POINT('',(151.483147,-84.655558,-3.5E-02)); +#212957 = LINE('',#212958,#212959); +#212958 = CARTESIAN_POINT('',(151.498079,-84.619509,-3.5E-02)); +#212959 = VECTOR('',#212960,1.); +#212960 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#212961 = ORIENTED_EDGE('',*,*,#212962,.F.); +#212962 = EDGE_CURVE('',#212963,#212955,#212965,.T.); +#212963 = VERTEX_POINT('',#212964); +#212964 = CARTESIAN_POINT('',(151.483147,-84.655558,0.)); +#212965 = LINE('',#212966,#212967); +#212966 = CARTESIAN_POINT('',(151.483147,-84.655558,0.)); +#212967 = VECTOR('',#212968,1.); +#212968 = DIRECTION('',(0.,0.,-1.)); +#212969 = ORIENTED_EDGE('',*,*,#212970,.F.); +#212970 = EDGE_CURVE('',#212932,#212963,#212971,.T.); +#212971 = LINE('',#212972,#212973); +#212972 = CARTESIAN_POINT('',(151.498079,-84.619509,0.)); +#212973 = VECTOR('',#212974,1.); +#212974 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#212975 = PLANE('',#212976); +#212976 = AXIS2_PLACEMENT_3D('',#212977,#212978,#212979); +#212977 = CARTESIAN_POINT('',(151.498079,-84.619509,0.)); +#212978 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#212979 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#212980 = ADVANCED_FACE('',(#212981),#213006,.F.); +#212981 = FACE_BOUND('',#212982,.F.); +#212982 = EDGE_LOOP('',(#212983,#212984,#212992,#213000)); +#212983 = ORIENTED_EDGE('',*,*,#212962,.T.); +#212984 = ORIENTED_EDGE('',*,*,#212985,.T.); +#212985 = EDGE_CURVE('',#212955,#212986,#212988,.T.); +#212986 = VERTEX_POINT('',#212987); +#212987 = CARTESIAN_POINT('',(150.7695,-85.371921,-3.5E-02)); +#212988 = LINE('',#212989,#212990); +#212989 = CARTESIAN_POINT('',(151.483147,-84.655558,-3.5E-02)); +#212990 = VECTOR('',#212991,1.); +#212991 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#212992 = ORIENTED_EDGE('',*,*,#212993,.F.); +#212993 = EDGE_CURVE('',#212994,#212986,#212996,.T.); +#212994 = VERTEX_POINT('',#212995); +#212995 = CARTESIAN_POINT('',(150.7695,-85.371921,0.)); +#212996 = LINE('',#212997,#212998); +#212997 = CARTESIAN_POINT('',(150.7695,-85.371921,0.)); +#212998 = VECTOR('',#212999,1.); +#212999 = DIRECTION('',(0.,0.,-1.)); +#213000 = ORIENTED_EDGE('',*,*,#213001,.F.); +#213001 = EDGE_CURVE('',#212963,#212994,#213002,.T.); +#213002 = LINE('',#213003,#213004); +#213003 = CARTESIAN_POINT('',(151.483147,-84.655558,0.)); +#213004 = VECTOR('',#213005,1.); +#213005 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#213006 = PLANE('',#213007); +#213007 = AXIS2_PLACEMENT_3D('',#213008,#213009,#213010); +#213008 = CARTESIAN_POINT('',(151.483147,-84.655558,0.)); +#213009 = DIRECTION('',(-0.70844850241,0.705762509229,0.)); +#213010 = DIRECTION('',(-0.705762509229,-0.70844850241,0.)); +#213011 = ADVANCED_FACE('',(#213012),#213037,.F.); +#213012 = FACE_BOUND('',#213013,.F.); +#213013 = EDGE_LOOP('',(#213014,#213015,#213023,#213031)); +#213014 = ORIENTED_EDGE('',*,*,#212993,.T.); +#213015 = ORIENTED_EDGE('',*,*,#213016,.T.); +#213016 = EDGE_CURVE('',#212986,#213017,#213019,.T.); +#213017 = VERTEX_POINT('',#213018); +#213018 = CARTESIAN_POINT('',(150.777164,-85.385195,-3.5E-02)); +#213019 = LINE('',#213020,#213021); +#213020 = CARTESIAN_POINT('',(150.7695,-85.371921,-3.5E-02)); +#213021 = VECTOR('',#213022,1.); +#213022 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#213023 = ORIENTED_EDGE('',*,*,#213024,.F.); +#213024 = EDGE_CURVE('',#213025,#213017,#213027,.T.); +#213025 = VERTEX_POINT('',#213026); +#213026 = CARTESIAN_POINT('',(150.777164,-85.385195,0.)); +#213027 = LINE('',#213028,#213029); +#213028 = CARTESIAN_POINT('',(150.777164,-85.385195,0.)); +#213029 = VECTOR('',#213030,1.); +#213030 = DIRECTION('',(0.,0.,-1.)); +#213031 = ORIENTED_EDGE('',*,*,#213032,.F.); +#213032 = EDGE_CURVE('',#212994,#213025,#213033,.T.); +#213033 = LINE('',#213034,#213035); +#213034 = CARTESIAN_POINT('',(150.7695,-85.371921,0.)); +#213035 = VECTOR('',#213036,1.); +#213036 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#213037 = PLANE('',#213038); +#213038 = AXIS2_PLACEMENT_3D('',#213039,#213040,#213041); +#213039 = CARTESIAN_POINT('',(150.7695,-85.371921,0.)); +#213040 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#213041 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#213042 = ADVANCED_FACE('',(#213043),#213070,.T.); +#213043 = FACE_BOUND('',#213044,.F.); +#213044 = EDGE_LOOP('',(#213045,#213046,#213055,#213063)); +#213045 = ORIENTED_EDGE('',*,*,#213024,.T.); +#213046 = ORIENTED_EDGE('',*,*,#213047,.T.); +#213047 = EDGE_CURVE('',#213017,#213048,#213050,.T.); +#213048 = VERTEX_POINT('',#213049); +#213049 = CARTESIAN_POINT('',(150.614805,-85.222836,-3.5E-02)); +#213050 = CIRCLE('',#213051,0.299999934501); +#213051 = AXIS2_PLACEMENT_3D('',#213052,#213053,#213054); +#213052 = CARTESIAN_POINT('',(150.50000014059,-85.4999998594,-3.5E-02)); +#213053 = DIRECTION('',(0.,0.,-1.)); +#213054 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#213055 = ORIENTED_EDGE('',*,*,#213056,.F.); +#213056 = EDGE_CURVE('',#213057,#213048,#213059,.T.); +#213057 = VERTEX_POINT('',#213058); +#213058 = CARTESIAN_POINT('',(150.614805,-85.222836,0.)); +#213059 = LINE('',#213060,#213061); +#213060 = CARTESIAN_POINT('',(150.614805,-85.222836,0.)); +#213061 = VECTOR('',#213062,1.); +#213062 = DIRECTION('',(0.,0.,-1.)); +#213063 = ORIENTED_EDGE('',*,*,#213064,.F.); +#213064 = EDGE_CURVE('',#213025,#213057,#213065,.T.); +#213065 = CIRCLE('',#213066,0.299999934501); +#213066 = AXIS2_PLACEMENT_3D('',#213067,#213068,#213069); +#213067 = CARTESIAN_POINT('',(150.50000014059,-85.4999998594,0.)); +#213068 = DIRECTION('',(0.,0.,-1.)); +#213069 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#213070 = CYLINDRICAL_SURFACE('',#213071,0.299999934501); +#213071 = AXIS2_PLACEMENT_3D('',#213072,#213073,#213074); +#213072 = CARTESIAN_POINT('',(150.50000014059,-85.4999998594,0.)); +#213073 = DIRECTION('',(-0.,-0.,1.)); +#213074 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#213075 = ADVANCED_FACE('',(#213076),#213101,.F.); +#213076 = FACE_BOUND('',#213077,.F.); +#213077 = EDGE_LOOP('',(#213078,#213079,#213087,#213095)); +#213078 = ORIENTED_EDGE('',*,*,#213056,.T.); +#213079 = ORIENTED_EDGE('',*,*,#213080,.T.); +#213080 = EDGE_CURVE('',#213048,#213081,#213083,.T.); +#213081 = VERTEX_POINT('',#213082); +#213082 = CARTESIAN_POINT('',(150.628078,-85.230499,-3.5E-02)); +#213083 = LINE('',#213084,#213085); +#213084 = CARTESIAN_POINT('',(150.614805,-85.222836,-3.5E-02)); +#213085 = VECTOR('',#213086,1.); +#213086 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#213087 = ORIENTED_EDGE('',*,*,#213088,.F.); +#213088 = EDGE_CURVE('',#213089,#213081,#213091,.T.); +#213089 = VERTEX_POINT('',#213090); +#213090 = CARTESIAN_POINT('',(150.628078,-85.230499,0.)); +#213091 = LINE('',#213092,#213093); +#213092 = CARTESIAN_POINT('',(150.628078,-85.230499,0.)); +#213093 = VECTOR('',#213094,1.); +#213094 = DIRECTION('',(0.,0.,-1.)); +#213095 = ORIENTED_EDGE('',*,*,#213096,.F.); +#213096 = EDGE_CURVE('',#213057,#213089,#213097,.T.); +#213097 = LINE('',#213098,#213099); +#213098 = CARTESIAN_POINT('',(150.614805,-85.222836,0.)); +#213099 = VECTOR('',#213100,1.); +#213100 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#213101 = PLANE('',#213102); +#213102 = AXIS2_PLACEMENT_3D('',#213103,#213104,#213105); +#213103 = CARTESIAN_POINT('',(150.614805,-85.222836,0.)); +#213104 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#213105 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#213106 = ADVANCED_FACE('',(#213107),#213132,.F.); +#213107 = FACE_BOUND('',#213108,.F.); +#213108 = EDGE_LOOP('',(#213109,#213110,#213118,#213126)); +#213109 = ORIENTED_EDGE('',*,*,#213088,.T.); +#213110 = ORIENTED_EDGE('',*,*,#213111,.T.); +#213111 = EDGE_CURVE('',#213081,#213112,#213114,.T.); +#213112 = VERTEX_POINT('',#213113); +#213113 = CARTESIAN_POINT('',(151.3,-84.558578,-3.5E-02)); +#213114 = LINE('',#213115,#213116); +#213115 = CARTESIAN_POINT('',(150.628078,-85.230499,-3.5E-02)); +#213116 = VECTOR('',#213117,1.); +#213117 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#213118 = ORIENTED_EDGE('',*,*,#213119,.F.); +#213119 = EDGE_CURVE('',#213120,#213112,#213122,.T.); +#213120 = VERTEX_POINT('',#213121); +#213121 = CARTESIAN_POINT('',(151.3,-84.558578,0.)); +#213122 = LINE('',#213123,#213124); +#213123 = CARTESIAN_POINT('',(151.3,-84.558578,0.)); +#213124 = VECTOR('',#213125,1.); +#213125 = DIRECTION('',(0.,0.,-1.)); +#213126 = ORIENTED_EDGE('',*,*,#213127,.F.); +#213127 = EDGE_CURVE('',#213089,#213120,#213128,.T.); +#213128 = LINE('',#213129,#213130); +#213129 = CARTESIAN_POINT('',(150.628078,-85.230499,0.)); +#213130 = VECTOR('',#213131,1.); +#213131 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#213132 = PLANE('',#213133); +#213133 = AXIS2_PLACEMENT_3D('',#213134,#213135,#213136); +#213134 = CARTESIAN_POINT('',(150.628078,-85.230499,0.)); +#213135 = DIRECTION('',(0.707106255004,-0.707107307369,0.)); +#213136 = DIRECTION('',(0.707107307369,0.707106255004,0.)); +#213137 = ADVANCED_FACE('',(#213138),#213163,.F.); +#213138 = FACE_BOUND('',#213139,.F.); +#213139 = EDGE_LOOP('',(#213140,#213141,#213149,#213157)); +#213140 = ORIENTED_EDGE('',*,*,#213119,.T.); +#213141 = ORIENTED_EDGE('',*,*,#213142,.T.); +#213142 = EDGE_CURVE('',#213112,#213143,#213145,.T.); +#213143 = VERTEX_POINT('',#213144); +#213144 = CARTESIAN_POINT('',(151.3,-75.941422,-3.5E-02)); +#213145 = LINE('',#213146,#213147); +#213146 = CARTESIAN_POINT('',(151.3,-84.558578,-3.5E-02)); +#213147 = VECTOR('',#213148,1.); +#213148 = DIRECTION('',(0.,1.,0.)); +#213149 = ORIENTED_EDGE('',*,*,#213150,.F.); +#213150 = EDGE_CURVE('',#213151,#213143,#213153,.T.); +#213151 = VERTEX_POINT('',#213152); +#213152 = CARTESIAN_POINT('',(151.3,-75.941422,0.)); +#213153 = LINE('',#213154,#213155); +#213154 = CARTESIAN_POINT('',(151.3,-75.941422,0.)); +#213155 = VECTOR('',#213156,1.); +#213156 = DIRECTION('',(0.,0.,-1.)); +#213157 = ORIENTED_EDGE('',*,*,#213158,.F.); +#213158 = EDGE_CURVE('',#213120,#213151,#213159,.T.); +#213159 = LINE('',#213160,#213161); +#213160 = CARTESIAN_POINT('',(151.3,-84.558578,0.)); +#213161 = VECTOR('',#213162,1.); +#213162 = DIRECTION('',(0.,1.,0.)); +#213163 = PLANE('',#213164); +#213164 = AXIS2_PLACEMENT_3D('',#213165,#213166,#213167); +#213165 = CARTESIAN_POINT('',(151.3,-84.558578,0.)); +#213166 = DIRECTION('',(1.,-0.,0.)); +#213167 = DIRECTION('',(0.,1.,0.)); +#213168 = ADVANCED_FACE('',(#213169),#213194,.F.); +#213169 = FACE_BOUND('',#213170,.F.); +#213170 = EDGE_LOOP('',(#213171,#213172,#213180,#213188)); +#213171 = ORIENTED_EDGE('',*,*,#213150,.T.); +#213172 = ORIENTED_EDGE('',*,*,#213173,.T.); +#213173 = EDGE_CURVE('',#213143,#213174,#213176,.T.); +#213174 = VERTEX_POINT('',#213175); +#213175 = CARTESIAN_POINT('',(150.628078,-75.2695,-3.5E-02)); +#213176 = LINE('',#213177,#213178); +#213177 = CARTESIAN_POINT('',(151.3,-75.941422,-3.5E-02)); +#213178 = VECTOR('',#213179,1.); +#213179 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#213180 = ORIENTED_EDGE('',*,*,#213181,.F.); +#213181 = EDGE_CURVE('',#213182,#213174,#213184,.T.); +#213182 = VERTEX_POINT('',#213183); +#213183 = CARTESIAN_POINT('',(150.628078,-75.2695,0.)); +#213184 = LINE('',#213185,#213186); +#213185 = CARTESIAN_POINT('',(150.628078,-75.2695,0.)); +#213186 = VECTOR('',#213187,1.); +#213187 = DIRECTION('',(0.,0.,-1.)); +#213188 = ORIENTED_EDGE('',*,*,#213189,.F.); +#213189 = EDGE_CURVE('',#213151,#213182,#213190,.T.); +#213190 = LINE('',#213191,#213192); +#213191 = CARTESIAN_POINT('',(151.3,-75.941422,0.)); +#213192 = VECTOR('',#213193,1.); +#213193 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#213194 = PLANE('',#213195); +#213195 = AXIS2_PLACEMENT_3D('',#213196,#213197,#213198); +#213196 = CARTESIAN_POINT('',(151.3,-75.941422,0.)); +#213197 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#213198 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#213199 = ADVANCED_FACE('',(#213200),#213225,.F.); +#213200 = FACE_BOUND('',#213201,.F.); +#213201 = EDGE_LOOP('',(#213202,#213203,#213211,#213219)); +#213202 = ORIENTED_EDGE('',*,*,#213181,.T.); +#213203 = ORIENTED_EDGE('',*,*,#213204,.T.); +#213204 = EDGE_CURVE('',#213174,#213205,#213207,.T.); +#213205 = VERTEX_POINT('',#213206); +#213206 = CARTESIAN_POINT('',(150.614805,-75.277164,-3.5E-02)); +#213207 = LINE('',#213208,#213209); +#213208 = CARTESIAN_POINT('',(150.628078,-75.2695,-3.5E-02)); +#213209 = VECTOR('',#213210,1.); +#213210 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#213211 = ORIENTED_EDGE('',*,*,#213212,.F.); +#213212 = EDGE_CURVE('',#213213,#213205,#213215,.T.); +#213213 = VERTEX_POINT('',#213214); +#213214 = CARTESIAN_POINT('',(150.614805,-75.277164,0.)); +#213215 = LINE('',#213216,#213217); +#213216 = CARTESIAN_POINT('',(150.614805,-75.277164,0.)); +#213217 = VECTOR('',#213218,1.); +#213218 = DIRECTION('',(0.,0.,-1.)); +#213219 = ORIENTED_EDGE('',*,*,#213220,.F.); +#213220 = EDGE_CURVE('',#213182,#213213,#213221,.T.); +#213221 = LINE('',#213222,#213223); +#213222 = CARTESIAN_POINT('',(150.628078,-75.2695,0.)); +#213223 = VECTOR('',#213224,1.); +#213224 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#213225 = PLANE('',#213226); +#213226 = AXIS2_PLACEMENT_3D('',#213227,#213228,#213229); +#213227 = CARTESIAN_POINT('',(150.628078,-75.2695,0.)); +#213228 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#213229 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#213230 = ADVANCED_FACE('',(#213231),#213258,.T.); +#213231 = FACE_BOUND('',#213232,.F.); +#213232 = EDGE_LOOP('',(#213233,#213234,#213243,#213251)); +#213233 = ORIENTED_EDGE('',*,*,#213212,.T.); +#213234 = ORIENTED_EDGE('',*,*,#213235,.T.); +#213235 = EDGE_CURVE('',#213205,#213236,#213238,.T.); +#213236 = VERTEX_POINT('',#213237); +#213237 = CARTESIAN_POINT('',(150.777164,-75.114805,-3.5E-02)); +#213238 = CIRCLE('',#213239,0.300000118202); +#213239 = AXIS2_PLACEMENT_3D('',#213240,#213241,#213242); +#213240 = CARTESIAN_POINT('',(150.5,-75.,-3.5E-02)); +#213241 = DIRECTION('',(0.,0.,-1.)); +#213242 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#213243 = ORIENTED_EDGE('',*,*,#213244,.F.); +#213244 = EDGE_CURVE('',#213245,#213236,#213247,.T.); +#213245 = VERTEX_POINT('',#213246); +#213246 = CARTESIAN_POINT('',(150.777164,-75.114805,0.)); +#213247 = LINE('',#213248,#213249); +#213248 = CARTESIAN_POINT('',(150.777164,-75.114805,0.)); +#213249 = VECTOR('',#213250,1.); +#213250 = DIRECTION('',(0.,0.,-1.)); +#213251 = ORIENTED_EDGE('',*,*,#213252,.F.); +#213252 = EDGE_CURVE('',#213213,#213245,#213253,.T.); +#213253 = CIRCLE('',#213254,0.300000118202); +#213254 = AXIS2_PLACEMENT_3D('',#213255,#213256,#213257); +#213255 = CARTESIAN_POINT('',(150.5,-75.,0.)); +#213256 = DIRECTION('',(0.,0.,-1.)); +#213257 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#213258 = CYLINDRICAL_SURFACE('',#213259,0.300000118202); +#213259 = AXIS2_PLACEMENT_3D('',#213260,#213261,#213262); +#213260 = CARTESIAN_POINT('',(150.5,-75.,0.)); +#213261 = DIRECTION('',(-0.,-0.,1.)); +#213262 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#213263 = ADVANCED_FACE('',(#213264),#213280,.F.); +#213264 = FACE_BOUND('',#213265,.F.); +#213265 = EDGE_LOOP('',(#213266,#213267,#213273,#213274)); +#213266 = ORIENTED_EDGE('',*,*,#213244,.T.); +#213267 = ORIENTED_EDGE('',*,*,#213268,.T.); +#213268 = EDGE_CURVE('',#213236,#212854,#213269,.T.); +#213269 = LINE('',#213270,#213271); +#213270 = CARTESIAN_POINT('',(150.777164,-75.114805,-3.5E-02)); +#213271 = VECTOR('',#213272,1.); +#213272 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#213273 = ORIENTED_EDGE('',*,*,#212851,.F.); +#213274 = ORIENTED_EDGE('',*,*,#213275,.F.); +#213275 = EDGE_CURVE('',#213245,#212852,#213276,.T.); +#213276 = LINE('',#213277,#213278); +#213277 = CARTESIAN_POINT('',(150.777164,-75.114805,0.)); +#213278 = VECTOR('',#213279,1.); +#213279 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#213280 = PLANE('',#213281); +#213281 = AXIS2_PLACEMENT_3D('',#213282,#213283,#213284); +#213282 = CARTESIAN_POINT('',(150.777164,-75.114805,0.)); +#213283 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#213284 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#213285 = ADVANCED_FACE('',(#213286),#213313,.F.); +#213286 = FACE_BOUND('',#213287,.F.); +#213287 = EDGE_LOOP('',(#213288,#213298,#213305,#213306)); +#213288 = ORIENTED_EDGE('',*,*,#213289,.T.); +#213289 = EDGE_CURVE('',#213290,#213292,#213294,.T.); +#213290 = VERTEX_POINT('',#213291); +#213291 = CARTESIAN_POINT('',(150.637255,-85.5,0.)); +#213292 = VERTEX_POINT('',#213293); +#213293 = CARTESIAN_POINT('',(150.637255,-85.5,-3.5E-02)); +#213294 = LINE('',#213295,#213296); +#213295 = CARTESIAN_POINT('',(150.637255,-85.5,0.)); +#213296 = VECTOR('',#213297,1.); +#213297 = DIRECTION('',(0.,0.,-1.)); +#213298 = ORIENTED_EDGE('',*,*,#213299,.T.); +#213299 = EDGE_CURVE('',#213292,#213292,#213300,.T.); +#213300 = CIRCLE('',#213301,0.137255); +#213301 = AXIS2_PLACEMENT_3D('',#213302,#213303,#213304); +#213302 = CARTESIAN_POINT('',(150.5,-85.5,-3.5E-02)); +#213303 = DIRECTION('',(0.,0.,1.)); +#213304 = DIRECTION('',(1.,0.,-0.)); +#213305 = ORIENTED_EDGE('',*,*,#213289,.F.); +#213306 = ORIENTED_EDGE('',*,*,#213307,.F.); +#213307 = EDGE_CURVE('',#213290,#213290,#213308,.T.); +#213308 = CIRCLE('',#213309,0.137255); +#213309 = AXIS2_PLACEMENT_3D('',#213310,#213311,#213312); +#213310 = CARTESIAN_POINT('',(150.5,-85.5,0.)); +#213311 = DIRECTION('',(0.,0.,1.)); +#213312 = DIRECTION('',(1.,0.,-0.)); +#213313 = CYLINDRICAL_SURFACE('',#213314,0.137255); +#213314 = AXIS2_PLACEMENT_3D('',#213315,#213316,#213317); +#213315 = CARTESIAN_POINT('',(150.5,-85.5,0.)); +#213316 = DIRECTION('',(0.,0.,1.)); +#213317 = DIRECTION('',(1.,0.,-0.)); +#213318 = ADVANCED_FACE('',(#213319),#213346,.F.); +#213319 = FACE_BOUND('',#213320,.F.); +#213320 = EDGE_LOOP('',(#213321,#213331,#213338,#213339)); +#213321 = ORIENTED_EDGE('',*,*,#213322,.T.); +#213322 = EDGE_CURVE('',#213323,#213325,#213327,.T.); +#213323 = VERTEX_POINT('',#213324); +#213324 = CARTESIAN_POINT('',(150.637255,-75.,0.)); +#213325 = VERTEX_POINT('',#213326); +#213326 = CARTESIAN_POINT('',(150.637255,-75.,-3.5E-02)); +#213327 = LINE('',#213328,#213329); +#213328 = CARTESIAN_POINT('',(150.637255,-75.,0.)); +#213329 = VECTOR('',#213330,1.); +#213330 = DIRECTION('',(0.,0.,-1.)); +#213331 = ORIENTED_EDGE('',*,*,#213332,.T.); +#213332 = EDGE_CURVE('',#213325,#213325,#213333,.T.); +#213333 = CIRCLE('',#213334,0.137255); +#213334 = AXIS2_PLACEMENT_3D('',#213335,#213336,#213337); +#213335 = CARTESIAN_POINT('',(150.5,-75.,-3.5E-02)); +#213336 = DIRECTION('',(0.,0.,1.)); +#213337 = DIRECTION('',(1.,0.,-0.)); +#213338 = ORIENTED_EDGE('',*,*,#213322,.F.); +#213339 = ORIENTED_EDGE('',*,*,#213340,.F.); +#213340 = EDGE_CURVE('',#213323,#213323,#213341,.T.); +#213341 = CIRCLE('',#213342,0.137255); +#213342 = AXIS2_PLACEMENT_3D('',#213343,#213344,#213345); +#213343 = CARTESIAN_POINT('',(150.5,-75.,0.)); +#213344 = DIRECTION('',(0.,0.,1.)); +#213345 = DIRECTION('',(1.,0.,-0.)); +#213346 = CYLINDRICAL_SURFACE('',#213347,0.137255); +#213347 = AXIS2_PLACEMENT_3D('',#213348,#213349,#213350); +#213348 = CARTESIAN_POINT('',(150.5,-75.,0.)); +#213349 = DIRECTION('',(0.,0.,1.)); +#213350 = DIRECTION('',(1.,0.,-0.)); +#213351 = ADVANCED_FACE('',(#213352,#213368,#213371),#213374,.F.); +#213352 = FACE_BOUND('',#213353,.F.); +#213353 = EDGE_LOOP('',(#213354,#213355,#213356,#213357,#213358,#213359, + #213360,#213361,#213362,#213363,#213364,#213365,#213366,#213367)); +#213354 = ORIENTED_EDGE('',*,*,#212877,.T.); +#213355 = ORIENTED_EDGE('',*,*,#212908,.T.); +#213356 = ORIENTED_EDGE('',*,*,#212939,.T.); +#213357 = ORIENTED_EDGE('',*,*,#212970,.T.); +#213358 = ORIENTED_EDGE('',*,*,#213001,.T.); +#213359 = ORIENTED_EDGE('',*,*,#213032,.T.); +#213360 = ORIENTED_EDGE('',*,*,#213064,.T.); +#213361 = ORIENTED_EDGE('',*,*,#213096,.T.); +#213362 = ORIENTED_EDGE('',*,*,#213127,.T.); +#213363 = ORIENTED_EDGE('',*,*,#213158,.T.); +#213364 = ORIENTED_EDGE('',*,*,#213189,.T.); +#213365 = ORIENTED_EDGE('',*,*,#213220,.T.); +#213366 = ORIENTED_EDGE('',*,*,#213252,.T.); +#213367 = ORIENTED_EDGE('',*,*,#213275,.T.); +#213368 = FACE_BOUND('',#213369,.F.); +#213369 = EDGE_LOOP('',(#213370)); +#213370 = ORIENTED_EDGE('',*,*,#213307,.T.); +#213371 = FACE_BOUND('',#213372,.F.); +#213372 = EDGE_LOOP('',(#213373)); +#213373 = ORIENTED_EDGE('',*,*,#213340,.T.); +#213374 = PLANE('',#213375); +#213375 = AXIS2_PLACEMENT_3D('',#213376,#213377,#213378); +#213376 = CARTESIAN_POINT('',(0.,0.,0.)); +#213377 = DIRECTION('',(-0.,-0.,-1.)); +#213378 = DIRECTION('',(-1.,0.,0.)); +#213379 = ADVANCED_FACE('',(#213380,#213396,#213399),#213402,.T.); +#213380 = FACE_BOUND('',#213381,.T.); +#213381 = EDGE_LOOP('',(#213382,#213383,#213384,#213385,#213386,#213387, + #213388,#213389,#213390,#213391,#213392,#213393,#213394,#213395)); +#213382 = ORIENTED_EDGE('',*,*,#212861,.T.); +#213383 = ORIENTED_EDGE('',*,*,#212892,.T.); +#213384 = ORIENTED_EDGE('',*,*,#212923,.T.); +#213385 = ORIENTED_EDGE('',*,*,#212954,.T.); +#213386 = ORIENTED_EDGE('',*,*,#212985,.T.); +#213387 = ORIENTED_EDGE('',*,*,#213016,.T.); +#213388 = ORIENTED_EDGE('',*,*,#213047,.T.); +#213389 = ORIENTED_EDGE('',*,*,#213080,.T.); +#213390 = ORIENTED_EDGE('',*,*,#213111,.T.); +#213391 = ORIENTED_EDGE('',*,*,#213142,.T.); +#213392 = ORIENTED_EDGE('',*,*,#213173,.T.); +#213393 = ORIENTED_EDGE('',*,*,#213204,.T.); +#213394 = ORIENTED_EDGE('',*,*,#213235,.T.); +#213395 = ORIENTED_EDGE('',*,*,#213268,.T.); +#213396 = FACE_BOUND('',#213397,.T.); +#213397 = EDGE_LOOP('',(#213398)); +#213398 = ORIENTED_EDGE('',*,*,#213299,.T.); +#213399 = FACE_BOUND('',#213400,.T.); +#213400 = EDGE_LOOP('',(#213401)); +#213401 = ORIENTED_EDGE('',*,*,#213332,.T.); +#213402 = PLANE('',#213403); +#213403 = AXIS2_PLACEMENT_3D('',#213404,#213405,#213406); +#213404 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#213405 = DIRECTION('',(-0.,-0.,-1.)); +#213406 = DIRECTION('',(-1.,0.,0.)); +#213407 = MANIFOLD_SOLID_BREP('',#213408); +#213408 = CLOSED_SHELL('',(#213409,#213451,#213482,#213513,#213544, + #213575,#213606,#213639,#213670,#213701,#213732,#213763,#213785, + #213818,#213841)); +#213409 = ADVANCED_FACE('',(#213410),#213446,.T.); +#213410 = FACE_BOUND('',#213411,.T.); +#213411 = EDGE_LOOP('',(#213412,#213422,#213431,#213439)); +#213412 = ORIENTED_EDGE('',*,*,#213413,.T.); +#213413 = EDGE_CURVE('',#213414,#213416,#213418,.T.); +#213414 = VERTEX_POINT('',#213415); +#213415 = CARTESIAN_POINT('',(129.230491,-68.558079,1.51)); +#213416 = VERTEX_POINT('',#213417); +#213417 = CARTESIAN_POINT('',(129.230491,-68.558079,1.545)); +#213418 = LINE('',#213419,#213420); +#213419 = CARTESIAN_POINT('',(129.230491,-68.558079,1.51)); +#213420 = VECTOR('',#213421,1.); +#213421 = DIRECTION('',(0.,0.,1.)); +#213422 = ORIENTED_EDGE('',*,*,#213423,.T.); +#213423 = EDGE_CURVE('',#213416,#213424,#213426,.T.); +#213424 = VERTEX_POINT('',#213425); +#213425 = CARTESIAN_POINT('',(129.230491,-68.361921,1.545)); +#213426 = CIRCLE('',#213427,0.100000456609); +#213427 = AXIS2_PLACEMENT_3D('',#213428,#213429,#213430); +#213428 = CARTESIAN_POINT('',(129.25,-68.46,1.545)); +#213429 = DIRECTION('',(0.,0.,-1.)); +#213430 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#213431 = ORIENTED_EDGE('',*,*,#213432,.F.); +#213432 = EDGE_CURVE('',#213433,#213424,#213435,.T.); +#213433 = VERTEX_POINT('',#213434); +#213434 = CARTESIAN_POINT('',(129.230491,-68.361921,1.51)); +#213435 = LINE('',#213436,#213437); +#213436 = CARTESIAN_POINT('',(129.230491,-68.361921,1.51)); +#213437 = VECTOR('',#213438,1.); +#213438 = DIRECTION('',(0.,0.,1.)); +#213439 = ORIENTED_EDGE('',*,*,#213440,.F.); +#213440 = EDGE_CURVE('',#213414,#213433,#213441,.T.); +#213441 = CIRCLE('',#213442,0.100000456609); +#213442 = AXIS2_PLACEMENT_3D('',#213443,#213444,#213445); +#213443 = CARTESIAN_POINT('',(129.25,-68.46,1.51)); +#213444 = DIRECTION('',(0.,0.,-1.)); +#213445 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#213446 = CYLINDRICAL_SURFACE('',#213447,0.100000456609); +#213447 = AXIS2_PLACEMENT_3D('',#213448,#213449,#213450); +#213448 = CARTESIAN_POINT('',(129.25,-68.46,1.51)); +#213449 = DIRECTION('',(0.,0.,-1.)); +#213450 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#213451 = ADVANCED_FACE('',(#213452),#213477,.T.); +#213452 = FACE_BOUND('',#213453,.T.); +#213453 = EDGE_LOOP('',(#213454,#213455,#213463,#213471)); +#213454 = ORIENTED_EDGE('',*,*,#213432,.T.); +#213455 = ORIENTED_EDGE('',*,*,#213456,.T.); +#213456 = EDGE_CURVE('',#213424,#213457,#213459,.T.); +#213457 = VERTEX_POINT('',#213458); +#213458 = CARTESIAN_POINT('',(130.159509,-68.361921,1.545)); +#213459 = LINE('',#213460,#213461); +#213460 = CARTESIAN_POINT('',(129.230491,-68.361921,1.545)); +#213461 = VECTOR('',#213462,1.); +#213462 = DIRECTION('',(1.,0.,0.)); +#213463 = ORIENTED_EDGE('',*,*,#213464,.F.); +#213464 = EDGE_CURVE('',#213465,#213457,#213467,.T.); +#213465 = VERTEX_POINT('',#213466); +#213466 = CARTESIAN_POINT('',(130.159509,-68.361921,1.51)); +#213467 = LINE('',#213468,#213469); +#213468 = CARTESIAN_POINT('',(130.159509,-68.361921,1.51)); +#213469 = VECTOR('',#213470,1.); +#213470 = DIRECTION('',(0.,0.,1.)); +#213471 = ORIENTED_EDGE('',*,*,#213472,.F.); +#213472 = EDGE_CURVE('',#213433,#213465,#213473,.T.); +#213473 = LINE('',#213474,#213475); +#213474 = CARTESIAN_POINT('',(129.230491,-68.361921,1.51)); +#213475 = VECTOR('',#213476,1.); +#213476 = DIRECTION('',(1.,0.,0.)); +#213477 = PLANE('',#213478); +#213478 = AXIS2_PLACEMENT_3D('',#213479,#213480,#213481); +#213479 = CARTESIAN_POINT('',(129.230491,-68.361921,1.51)); +#213480 = DIRECTION('',(0.,1.,0.)); +#213481 = DIRECTION('',(1.,0.,0.)); +#213482 = ADVANCED_FACE('',(#213483),#213508,.T.); +#213483 = FACE_BOUND('',#213484,.T.); +#213484 = EDGE_LOOP('',(#213485,#213486,#213494,#213502)); +#213485 = ORIENTED_EDGE('',*,*,#213464,.T.); +#213486 = ORIENTED_EDGE('',*,*,#213487,.T.); +#213487 = EDGE_CURVE('',#213457,#213488,#213490,.T.); +#213488 = VERTEX_POINT('',#213489); +#213489 = CARTESIAN_POINT('',(130.195557,-68.376853,1.545)); +#213490 = LINE('',#213491,#213492); +#213491 = CARTESIAN_POINT('',(130.159509,-68.361921,1.545)); +#213492 = VECTOR('',#213493,1.); +#213493 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#213494 = ORIENTED_EDGE('',*,*,#213495,.F.); +#213495 = EDGE_CURVE('',#213496,#213488,#213498,.T.); +#213496 = VERTEX_POINT('',#213497); +#213497 = CARTESIAN_POINT('',(130.195557,-68.376853,1.51)); +#213498 = LINE('',#213499,#213500); +#213499 = CARTESIAN_POINT('',(130.195557,-68.376853,1.51)); +#213500 = VECTOR('',#213501,1.); +#213501 = DIRECTION('',(0.,0.,1.)); +#213502 = ORIENTED_EDGE('',*,*,#213503,.F.); +#213503 = EDGE_CURVE('',#213465,#213496,#213504,.T.); +#213504 = LINE('',#213505,#213506); +#213505 = CARTESIAN_POINT('',(130.159509,-68.361921,1.51)); +#213506 = VECTOR('',#213507,1.); +#213507 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#213508 = PLANE('',#213509); +#213509 = AXIS2_PLACEMENT_3D('',#213510,#213511,#213512); +#213510 = CARTESIAN_POINT('',(130.159509,-68.361921,1.51)); +#213511 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#213512 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#213513 = ADVANCED_FACE('',(#213514),#213539,.T.); +#213514 = FACE_BOUND('',#213515,.T.); +#213515 = EDGE_LOOP('',(#213516,#213517,#213525,#213533)); +#213516 = ORIENTED_EDGE('',*,*,#213495,.T.); +#213517 = ORIENTED_EDGE('',*,*,#213518,.T.); +#213518 = EDGE_CURVE('',#213488,#213519,#213521,.T.); +#213519 = VERTEX_POINT('',#213520); +#213520 = CARTESIAN_POINT('',(132.621422,-70.8,1.545)); +#213521 = LINE('',#213522,#213523); +#213522 = CARTESIAN_POINT('',(130.195557,-68.376853,1.545)); +#213523 = VECTOR('',#213524,1.); +#213524 = DIRECTION('',(0.707503022171,-0.706710318037,0.)); +#213525 = ORIENTED_EDGE('',*,*,#213526,.F.); +#213526 = EDGE_CURVE('',#213527,#213519,#213529,.T.); +#213527 = VERTEX_POINT('',#213528); +#213528 = CARTESIAN_POINT('',(132.621422,-70.8,1.51)); +#213529 = LINE('',#213530,#213531); +#213530 = CARTESIAN_POINT('',(132.621422,-70.8,1.51)); +#213531 = VECTOR('',#213532,1.); +#213532 = DIRECTION('',(0.,0.,1.)); +#213533 = ORIENTED_EDGE('',*,*,#213534,.F.); +#213534 = EDGE_CURVE('',#213496,#213527,#213535,.T.); +#213535 = LINE('',#213536,#213537); +#213536 = CARTESIAN_POINT('',(130.195557,-68.376853,1.51)); +#213537 = VECTOR('',#213538,1.); +#213538 = DIRECTION('',(0.707503022171,-0.706710318037,0.)); +#213539 = PLANE('',#213540); +#213540 = AXIS2_PLACEMENT_3D('',#213541,#213542,#213543); +#213541 = CARTESIAN_POINT('',(130.195557,-68.376853,1.51)); +#213542 = DIRECTION('',(0.706710318037,0.707503022171,-0.)); +#213543 = DIRECTION('',(0.707503022171,-0.706710318037,0.)); +#213544 = ADVANCED_FACE('',(#213545),#213570,.T.); +#213545 = FACE_BOUND('',#213546,.T.); +#213546 = EDGE_LOOP('',(#213547,#213548,#213556,#213564)); +#213547 = ORIENTED_EDGE('',*,*,#213526,.T.); +#213548 = ORIENTED_EDGE('',*,*,#213549,.T.); +#213549 = EDGE_CURVE('',#213519,#213550,#213552,.T.); +#213550 = VERTEX_POINT('',#213551); +#213551 = CARTESIAN_POINT('',(133.668869,-70.8,1.545)); +#213552 = LINE('',#213553,#213554); +#213553 = CARTESIAN_POINT('',(132.621422,-70.8,1.545)); +#213554 = VECTOR('',#213555,1.); +#213555 = DIRECTION('',(1.,0.,0.)); +#213556 = ORIENTED_EDGE('',*,*,#213557,.F.); +#213557 = EDGE_CURVE('',#213558,#213550,#213560,.T.); +#213558 = VERTEX_POINT('',#213559); +#213559 = CARTESIAN_POINT('',(133.668869,-70.8,1.51)); +#213560 = LINE('',#213561,#213562); +#213561 = CARTESIAN_POINT('',(133.668869,-70.8,1.51)); +#213562 = VECTOR('',#213563,1.); +#213563 = DIRECTION('',(0.,0.,1.)); +#213564 = ORIENTED_EDGE('',*,*,#213565,.F.); +#213565 = EDGE_CURVE('',#213527,#213558,#213566,.T.); +#213566 = LINE('',#213567,#213568); +#213567 = CARTESIAN_POINT('',(132.621422,-70.8,1.51)); +#213568 = VECTOR('',#213569,1.); +#213569 = DIRECTION('',(1.,0.,0.)); +#213570 = PLANE('',#213571); +#213571 = AXIS2_PLACEMENT_3D('',#213572,#213573,#213574); +#213572 = CARTESIAN_POINT('',(132.621422,-70.8,1.51)); +#213573 = DIRECTION('',(0.,1.,0.)); +#213574 = DIRECTION('',(1.,0.,0.)); +#213575 = ADVANCED_FACE('',(#213576),#213601,.T.); +#213576 = FACE_BOUND('',#213577,.T.); +#213577 = EDGE_LOOP('',(#213578,#213579,#213587,#213595)); +#213578 = ORIENTED_EDGE('',*,*,#213557,.T.); +#213579 = ORIENTED_EDGE('',*,*,#213580,.T.); +#213580 = EDGE_CURVE('',#213550,#213581,#213583,.T.); +#213581 = VERTEX_POINT('',#213582); +#213582 = CARTESIAN_POINT('',(133.672836,-70.785195,1.545)); +#213583 = LINE('',#213584,#213585); +#213584 = CARTESIAN_POINT('',(133.668869,-70.8,1.545)); +#213585 = VECTOR('',#213586,1.); +#213586 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#213587 = ORIENTED_EDGE('',*,*,#213588,.F.); +#213588 = EDGE_CURVE('',#213589,#213581,#213591,.T.); +#213589 = VERTEX_POINT('',#213590); +#213590 = CARTESIAN_POINT('',(133.672836,-70.785195,1.51)); +#213591 = LINE('',#213592,#213593); +#213592 = CARTESIAN_POINT('',(133.672836,-70.785195,1.51)); +#213593 = VECTOR('',#213594,1.); +#213594 = DIRECTION('',(0.,0.,1.)); +#213595 = ORIENTED_EDGE('',*,*,#213596,.F.); +#213596 = EDGE_CURVE('',#213558,#213589,#213597,.T.); +#213597 = LINE('',#213598,#213599); +#213598 = CARTESIAN_POINT('',(133.668869,-70.8,1.51)); +#213599 = VECTOR('',#213600,1.); +#213600 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#213601 = PLANE('',#213602); +#213602 = AXIS2_PLACEMENT_3D('',#213603,#213604,#213605); +#213603 = CARTESIAN_POINT('',(133.668869,-70.8,1.51)); +#213604 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#213605 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#213606 = ADVANCED_FACE('',(#213607),#213634,.T.); +#213607 = FACE_BOUND('',#213608,.T.); +#213608 = EDGE_LOOP('',(#213609,#213610,#213619,#213627)); +#213609 = ORIENTED_EDGE('',*,*,#213588,.T.); +#213610 = ORIENTED_EDGE('',*,*,#213611,.T.); +#213611 = EDGE_CURVE('',#213581,#213612,#213614,.T.); +#213612 = VERTEX_POINT('',#213613); +#213613 = CARTESIAN_POINT('',(133.672836,-71.014805,1.545)); +#213614 = CIRCLE('',#213615,0.299999850918); +#213615 = AXIS2_PLACEMENT_3D('',#213616,#213617,#213618); +#213616 = CARTESIAN_POINT('',(133.94999971069,-70.9,1.545)); +#213617 = DIRECTION('',(0.,0.,-1.)); +#213618 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#213619 = ORIENTED_EDGE('',*,*,#213620,.F.); +#213620 = EDGE_CURVE('',#213621,#213612,#213623,.T.); +#213621 = VERTEX_POINT('',#213622); +#213622 = CARTESIAN_POINT('',(133.672836,-71.014805,1.51)); +#213623 = LINE('',#213624,#213625); +#213624 = CARTESIAN_POINT('',(133.672836,-71.014805,1.51)); +#213625 = VECTOR('',#213626,1.); +#213626 = DIRECTION('',(0.,0.,1.)); +#213627 = ORIENTED_EDGE('',*,*,#213628,.F.); +#213628 = EDGE_CURVE('',#213589,#213621,#213629,.T.); +#213629 = CIRCLE('',#213630,0.299999850918); +#213630 = AXIS2_PLACEMENT_3D('',#213631,#213632,#213633); +#213631 = CARTESIAN_POINT('',(133.94999971069,-70.9,1.51)); +#213632 = DIRECTION('',(0.,0.,-1.)); +#213633 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#213634 = CYLINDRICAL_SURFACE('',#213635,0.299999850918); +#213635 = AXIS2_PLACEMENT_3D('',#213636,#213637,#213638); +#213636 = CARTESIAN_POINT('',(133.94999971069,-70.9,1.51)); +#213637 = DIRECTION('',(0.,0.,-1.)); +#213638 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#213639 = ADVANCED_FACE('',(#213640),#213665,.T.); +#213640 = FACE_BOUND('',#213641,.T.); +#213641 = EDGE_LOOP('',(#213642,#213643,#213651,#213659)); +#213642 = ORIENTED_EDGE('',*,*,#213620,.T.); +#213643 = ORIENTED_EDGE('',*,*,#213644,.T.); +#213644 = EDGE_CURVE('',#213612,#213645,#213647,.T.); +#213645 = VERTEX_POINT('',#213646); +#213646 = CARTESIAN_POINT('',(133.668869,-71.,1.545)); +#213647 = LINE('',#213648,#213649); +#213648 = CARTESIAN_POINT('',(133.672836,-71.014805,1.545)); +#213649 = VECTOR('',#213650,1.); +#213650 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#213651 = ORIENTED_EDGE('',*,*,#213652,.F.); +#213652 = EDGE_CURVE('',#213653,#213645,#213655,.T.); +#213653 = VERTEX_POINT('',#213654); +#213654 = CARTESIAN_POINT('',(133.668869,-71.,1.51)); +#213655 = LINE('',#213656,#213657); +#213656 = CARTESIAN_POINT('',(133.668869,-71.,1.51)); +#213657 = VECTOR('',#213658,1.); +#213658 = DIRECTION('',(0.,0.,1.)); +#213659 = ORIENTED_EDGE('',*,*,#213660,.F.); +#213660 = EDGE_CURVE('',#213621,#213653,#213661,.T.); +#213661 = LINE('',#213662,#213663); +#213662 = CARTESIAN_POINT('',(133.672836,-71.014805,1.51)); +#213663 = VECTOR('',#213664,1.); +#213664 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#213665 = PLANE('',#213666); +#213666 = AXIS2_PLACEMENT_3D('',#213667,#213668,#213669); +#213667 = CARTESIAN_POINT('',(133.672836,-71.014805,1.51)); +#213668 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#213669 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#213670 = ADVANCED_FACE('',(#213671),#213696,.T.); +#213671 = FACE_BOUND('',#213672,.T.); +#213672 = EDGE_LOOP('',(#213673,#213674,#213682,#213690)); +#213673 = ORIENTED_EDGE('',*,*,#213652,.T.); +#213674 = ORIENTED_EDGE('',*,*,#213675,.T.); +#213675 = EDGE_CURVE('',#213645,#213676,#213678,.T.); +#213676 = VERTEX_POINT('',#213677); +#213677 = CARTESIAN_POINT('',(132.560491,-70.998079,1.545)); +#213678 = LINE('',#213679,#213680); +#213679 = CARTESIAN_POINT('',(133.668869,-71.,1.545)); +#213680 = VECTOR('',#213681,1.); +#213681 = DIRECTION('',(-0.999998498076,1.733160631842E-03,0.)); +#213682 = ORIENTED_EDGE('',*,*,#213683,.F.); +#213683 = EDGE_CURVE('',#213684,#213676,#213686,.T.); +#213684 = VERTEX_POINT('',#213685); +#213685 = CARTESIAN_POINT('',(132.560491,-70.998079,1.51)); +#213686 = LINE('',#213687,#213688); +#213687 = CARTESIAN_POINT('',(132.560491,-70.998079,1.51)); +#213688 = VECTOR('',#213689,1.); +#213689 = DIRECTION('',(0.,0.,1.)); +#213690 = ORIENTED_EDGE('',*,*,#213691,.F.); +#213691 = EDGE_CURVE('',#213653,#213684,#213692,.T.); +#213692 = LINE('',#213693,#213694); +#213693 = CARTESIAN_POINT('',(133.668869,-71.,1.51)); +#213694 = VECTOR('',#213695,1.); +#213695 = DIRECTION('',(-0.999998498076,1.733160631842E-03,0.)); +#213696 = PLANE('',#213697); +#213697 = AXIS2_PLACEMENT_3D('',#213698,#213699,#213700); +#213698 = CARTESIAN_POINT('',(133.668869,-71.,1.51)); +#213699 = DIRECTION('',(-1.733160631842E-03,-0.999998498076,0.)); +#213700 = DIRECTION('',(-0.999998498076,1.733160631842E-03,0.)); +#213701 = ADVANCED_FACE('',(#213702),#213727,.T.); +#213702 = FACE_BOUND('',#213703,.T.); +#213703 = EDGE_LOOP('',(#213704,#213705,#213713,#213721)); +#213704 = ORIENTED_EDGE('',*,*,#213683,.T.); +#213705 = ORIENTED_EDGE('',*,*,#213706,.T.); +#213706 = EDGE_CURVE('',#213676,#213707,#213709,.T.); +#213707 = VERTEX_POINT('',#213708); +#213708 = CARTESIAN_POINT('',(132.524443,-70.983147,1.545)); +#213709 = LINE('',#213710,#213711); +#213710 = CARTESIAN_POINT('',(132.560491,-70.998079,1.545)); +#213711 = VECTOR('',#213712,1.); +#213712 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#213713 = ORIENTED_EDGE('',*,*,#213714,.F.); +#213714 = EDGE_CURVE('',#213715,#213707,#213717,.T.); +#213715 = VERTEX_POINT('',#213716); +#213716 = CARTESIAN_POINT('',(132.524443,-70.983147,1.51)); +#213717 = LINE('',#213718,#213719); +#213718 = CARTESIAN_POINT('',(132.524443,-70.983147,1.51)); +#213719 = VECTOR('',#213720,1.); +#213720 = DIRECTION('',(0.,0.,1.)); +#213721 = ORIENTED_EDGE('',*,*,#213722,.F.); +#213722 = EDGE_CURVE('',#213684,#213715,#213723,.T.); +#213723 = LINE('',#213724,#213725); +#213724 = CARTESIAN_POINT('',(132.560491,-70.998079,1.51)); +#213725 = VECTOR('',#213726,1.); +#213726 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#213727 = PLANE('',#213728); +#213728 = AXIS2_PLACEMENT_3D('',#213729,#213730,#213731); +#213729 = CARTESIAN_POINT('',(132.560491,-70.998079,1.51)); +#213730 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#213731 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#213732 = ADVANCED_FACE('',(#213733),#213758,.T.); +#213733 = FACE_BOUND('',#213734,.T.); +#213734 = EDGE_LOOP('',(#213735,#213736,#213744,#213752)); +#213735 = ORIENTED_EDGE('',*,*,#213714,.T.); +#213736 = ORIENTED_EDGE('',*,*,#213737,.T.); +#213737 = EDGE_CURVE('',#213707,#213738,#213740,.T.); +#213738 = VERTEX_POINT('',#213739); +#213739 = CARTESIAN_POINT('',(130.098578,-68.56,1.545)); +#213740 = LINE('',#213741,#213742); +#213741 = CARTESIAN_POINT('',(132.524443,-70.983147,1.545)); +#213742 = VECTOR('',#213743,1.); +#213743 = DIRECTION('',(-0.707503022171,0.706710318037,0.)); +#213744 = ORIENTED_EDGE('',*,*,#213745,.F.); +#213745 = EDGE_CURVE('',#213746,#213738,#213748,.T.); +#213746 = VERTEX_POINT('',#213747); +#213747 = CARTESIAN_POINT('',(130.098578,-68.56,1.51)); +#213748 = LINE('',#213749,#213750); +#213749 = CARTESIAN_POINT('',(130.098578,-68.56,1.51)); +#213750 = VECTOR('',#213751,1.); +#213751 = DIRECTION('',(0.,0.,1.)); +#213752 = ORIENTED_EDGE('',*,*,#213753,.F.); +#213753 = EDGE_CURVE('',#213715,#213746,#213754,.T.); +#213754 = LINE('',#213755,#213756); +#213755 = CARTESIAN_POINT('',(132.524443,-70.983147,1.51)); +#213756 = VECTOR('',#213757,1.); +#213757 = DIRECTION('',(-0.707503022171,0.706710318037,0.)); +#213758 = PLANE('',#213759); +#213759 = AXIS2_PLACEMENT_3D('',#213760,#213761,#213762); +#213760 = CARTESIAN_POINT('',(132.524443,-70.983147,1.51)); +#213761 = DIRECTION('',(-0.706710318037,-0.707503022171,0.)); +#213762 = DIRECTION('',(-0.707503022171,0.706710318037,0.)); +#213763 = ADVANCED_FACE('',(#213764),#213780,.T.); +#213764 = FACE_BOUND('',#213765,.T.); +#213765 = EDGE_LOOP('',(#213766,#213767,#213773,#213774)); +#213766 = ORIENTED_EDGE('',*,*,#213745,.T.); +#213767 = ORIENTED_EDGE('',*,*,#213768,.T.); +#213768 = EDGE_CURVE('',#213738,#213416,#213769,.T.); +#213769 = LINE('',#213770,#213771); +#213770 = CARTESIAN_POINT('',(130.098578,-68.56,1.545)); +#213771 = VECTOR('',#213772,1.); +#213772 = DIRECTION('',(-0.99999755152,2.212906421205E-03,0.)); +#213773 = ORIENTED_EDGE('',*,*,#213413,.F.); +#213774 = ORIENTED_EDGE('',*,*,#213775,.F.); +#213775 = EDGE_CURVE('',#213746,#213414,#213776,.T.); +#213776 = LINE('',#213777,#213778); +#213777 = CARTESIAN_POINT('',(130.098578,-68.56,1.51)); +#213778 = VECTOR('',#213779,1.); +#213779 = DIRECTION('',(-0.99999755152,2.212906421205E-03,0.)); +#213780 = PLANE('',#213781); +#213781 = AXIS2_PLACEMENT_3D('',#213782,#213783,#213784); +#213782 = CARTESIAN_POINT('',(130.098578,-68.56,1.51)); +#213783 = DIRECTION('',(-2.212906421205E-03,-0.99999755152,0.)); +#213784 = DIRECTION('',(-0.99999755152,2.212906421205E-03,0.)); +#213785 = ADVANCED_FACE('',(#213786),#213813,.F.); +#213786 = FACE_BOUND('',#213787,.T.); +#213787 = EDGE_LOOP('',(#213788,#213798,#213805,#213806)); +#213788 = ORIENTED_EDGE('',*,*,#213789,.T.); +#213789 = EDGE_CURVE('',#213790,#213792,#213794,.T.); +#213790 = VERTEX_POINT('',#213791); +#213791 = CARTESIAN_POINT('',(134.087255,-70.9,1.51)); +#213792 = VERTEX_POINT('',#213793); +#213793 = CARTESIAN_POINT('',(134.087255,-70.9,1.545)); +#213794 = LINE('',#213795,#213796); +#213795 = CARTESIAN_POINT('',(134.087255,-70.9,1.51)); +#213796 = VECTOR('',#213797,1.); +#213797 = DIRECTION('',(0.,0.,1.)); +#213798 = ORIENTED_EDGE('',*,*,#213799,.T.); +#213799 = EDGE_CURVE('',#213792,#213792,#213800,.T.); +#213800 = CIRCLE('',#213801,0.137255); +#213801 = AXIS2_PLACEMENT_3D('',#213802,#213803,#213804); +#213802 = CARTESIAN_POINT('',(133.95,-70.9,1.545)); +#213803 = DIRECTION('',(0.,0.,1.)); +#213804 = DIRECTION('',(1.,0.,-0.)); +#213805 = ORIENTED_EDGE('',*,*,#213789,.F.); +#213806 = ORIENTED_EDGE('',*,*,#213807,.F.); +#213807 = EDGE_CURVE('',#213790,#213790,#213808,.T.); +#213808 = CIRCLE('',#213809,0.137255); +#213809 = AXIS2_PLACEMENT_3D('',#213810,#213811,#213812); +#213810 = CARTESIAN_POINT('',(133.95,-70.9,1.51)); +#213811 = DIRECTION('',(0.,0.,1.)); +#213812 = DIRECTION('',(1.,0.,-0.)); +#213813 = CYLINDRICAL_SURFACE('',#213814,0.137255); +#213814 = AXIS2_PLACEMENT_3D('',#213815,#213816,#213817); +#213815 = CARTESIAN_POINT('',(133.95,-70.9,1.51)); +#213816 = DIRECTION('',(-0.,-0.,-1.)); +#213817 = DIRECTION('',(1.,0.,-0.)); +#213818 = ADVANCED_FACE('',(#213819,#213833),#213836,.F.); +#213819 = FACE_BOUND('',#213820,.T.); +#213820 = EDGE_LOOP('',(#213821,#213822,#213823,#213824,#213825,#213826, + #213827,#213828,#213829,#213830,#213831,#213832)); +#213821 = ORIENTED_EDGE('',*,*,#213440,.T.); +#213822 = ORIENTED_EDGE('',*,*,#213472,.T.); +#213823 = ORIENTED_EDGE('',*,*,#213503,.T.); +#213824 = ORIENTED_EDGE('',*,*,#213534,.T.); +#213825 = ORIENTED_EDGE('',*,*,#213565,.T.); +#213826 = ORIENTED_EDGE('',*,*,#213596,.T.); +#213827 = ORIENTED_EDGE('',*,*,#213628,.T.); +#213828 = ORIENTED_EDGE('',*,*,#213660,.T.); +#213829 = ORIENTED_EDGE('',*,*,#213691,.T.); +#213830 = ORIENTED_EDGE('',*,*,#213722,.T.); +#213831 = ORIENTED_EDGE('',*,*,#213753,.T.); +#213832 = ORIENTED_EDGE('',*,*,#213775,.T.); +#213833 = FACE_BOUND('',#213834,.T.); +#213834 = EDGE_LOOP('',(#213835)); +#213835 = ORIENTED_EDGE('',*,*,#213807,.T.); +#213836 = PLANE('',#213837); +#213837 = AXIS2_PLACEMENT_3D('',#213838,#213839,#213840); +#213838 = CARTESIAN_POINT('',(0.,0.,1.51)); +#213839 = DIRECTION('',(0.,0.,1.)); +#213840 = DIRECTION('',(1.,0.,-0.)); +#213841 = ADVANCED_FACE('',(#213842,#213856),#213859,.T.); +#213842 = FACE_BOUND('',#213843,.F.); +#213843 = EDGE_LOOP('',(#213844,#213845,#213846,#213847,#213848,#213849, + #213850,#213851,#213852,#213853,#213854,#213855)); +#213844 = ORIENTED_EDGE('',*,*,#213423,.T.); +#213845 = ORIENTED_EDGE('',*,*,#213456,.T.); +#213846 = ORIENTED_EDGE('',*,*,#213487,.T.); +#213847 = ORIENTED_EDGE('',*,*,#213518,.T.); +#213848 = ORIENTED_EDGE('',*,*,#213549,.T.); +#213849 = ORIENTED_EDGE('',*,*,#213580,.T.); +#213850 = ORIENTED_EDGE('',*,*,#213611,.T.); +#213851 = ORIENTED_EDGE('',*,*,#213644,.T.); +#213852 = ORIENTED_EDGE('',*,*,#213675,.T.); +#213853 = ORIENTED_EDGE('',*,*,#213706,.T.); +#213854 = ORIENTED_EDGE('',*,*,#213737,.T.); +#213855 = ORIENTED_EDGE('',*,*,#213768,.T.); +#213856 = FACE_BOUND('',#213857,.F.); +#213857 = EDGE_LOOP('',(#213858)); +#213858 = ORIENTED_EDGE('',*,*,#213799,.T.); +#213859 = PLANE('',#213860); +#213860 = AXIS2_PLACEMENT_3D('',#213861,#213862,#213863); +#213861 = CARTESIAN_POINT('',(0.,0.,1.545)); +#213862 = DIRECTION('',(0.,0.,1.)); +#213863 = DIRECTION('',(1.,0.,-0.)); +#213864 = MANIFOLD_SOLID_BREP('',#213865); +#213865 = CLOSED_SHELL('',(#213866,#213906,#213937,#213970,#214001, + #214032,#214063,#214094,#214125,#214158,#214189,#214220,#214242, + #214275,#214298)); +#213866 = ADVANCED_FACE('',(#213867),#213901,.F.); +#213867 = FACE_BOUND('',#213868,.F.); +#213868 = EDGE_LOOP('',(#213869,#213879,#213887,#213895)); +#213869 = ORIENTED_EDGE('',*,*,#213870,.T.); +#213870 = EDGE_CURVE('',#213871,#213873,#213875,.T.); +#213871 = VERTEX_POINT('',#213872); +#213872 = CARTESIAN_POINT('',(135.144442,-70.116853,0.)); +#213873 = VERTEX_POINT('',#213874); +#213874 = CARTESIAN_POINT('',(135.144442,-70.116853,-3.5E-02)); +#213875 = LINE('',#213876,#213877); +#213876 = CARTESIAN_POINT('',(135.144442,-70.116853,0.)); +#213877 = VECTOR('',#213878,1.); +#213878 = DIRECTION('',(0.,0.,-1.)); +#213879 = ORIENTED_EDGE('',*,*,#213880,.T.); +#213880 = EDGE_CURVE('',#213873,#213881,#213883,.T.); +#213881 = VERTEX_POINT('',#213882); +#213882 = CARTESIAN_POINT('',(135.180491,-70.101921,-3.5E-02)); +#213883 = LINE('',#213884,#213885); +#213884 = CARTESIAN_POINT('',(135.144442,-70.116853,-3.5E-02)); +#213885 = VECTOR('',#213886,1.); +#213886 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#213887 = ORIENTED_EDGE('',*,*,#213888,.F.); +#213888 = EDGE_CURVE('',#213889,#213881,#213891,.T.); +#213889 = VERTEX_POINT('',#213890); +#213890 = CARTESIAN_POINT('',(135.180491,-70.101921,0.)); +#213891 = LINE('',#213892,#213893); +#213892 = CARTESIAN_POINT('',(135.180491,-70.101921,0.)); +#213893 = VECTOR('',#213894,1.); +#213894 = DIRECTION('',(0.,0.,-1.)); +#213895 = ORIENTED_EDGE('',*,*,#213896,.F.); +#213896 = EDGE_CURVE('',#213871,#213889,#213897,.T.); +#213897 = LINE('',#213898,#213899); +#213898 = CARTESIAN_POINT('',(135.144442,-70.116853,0.)); +#213899 = VECTOR('',#213900,1.); +#213900 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#213901 = PLANE('',#213902); +#213902 = AXIS2_PLACEMENT_3D('',#213903,#213904,#213905); +#213903 = CARTESIAN_POINT('',(135.144442,-70.116853,0.)); +#213904 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#213905 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#213906 = ADVANCED_FACE('',(#213907),#213932,.F.); +#213907 = FACE_BOUND('',#213908,.F.); +#213908 = EDGE_LOOP('',(#213909,#213910,#213918,#213926)); +#213909 = ORIENTED_EDGE('',*,*,#213888,.T.); +#213910 = ORIENTED_EDGE('',*,*,#213911,.T.); +#213911 = EDGE_CURVE('',#213881,#213912,#213914,.T.); +#213912 = VERTEX_POINT('',#213913); +#213913 = CARTESIAN_POINT('',(136.919509,-70.101921,-3.5E-02)); +#213914 = LINE('',#213915,#213916); +#213915 = CARTESIAN_POINT('',(135.180491,-70.101921,-3.5E-02)); +#213916 = VECTOR('',#213917,1.); +#213917 = DIRECTION('',(1.,0.,0.)); +#213918 = ORIENTED_EDGE('',*,*,#213919,.F.); +#213919 = EDGE_CURVE('',#213920,#213912,#213922,.T.); +#213920 = VERTEX_POINT('',#213921); +#213921 = CARTESIAN_POINT('',(136.919509,-70.101921,0.)); +#213922 = LINE('',#213923,#213924); +#213923 = CARTESIAN_POINT('',(136.919509,-70.101921,0.)); +#213924 = VECTOR('',#213925,1.); +#213925 = DIRECTION('',(0.,0.,-1.)); +#213926 = ORIENTED_EDGE('',*,*,#213927,.F.); +#213927 = EDGE_CURVE('',#213889,#213920,#213928,.T.); +#213928 = LINE('',#213929,#213930); +#213929 = CARTESIAN_POINT('',(135.180491,-70.101921,0.)); +#213930 = VECTOR('',#213931,1.); +#213931 = DIRECTION('',(1.,0.,0.)); +#213932 = PLANE('',#213933); +#213933 = AXIS2_PLACEMENT_3D('',#213934,#213935,#213936); +#213934 = CARTESIAN_POINT('',(135.180491,-70.101921,0.)); +#213935 = DIRECTION('',(0.,-1.,0.)); +#213936 = DIRECTION('',(1.,0.,0.)); +#213937 = ADVANCED_FACE('',(#213938),#213965,.T.); +#213938 = FACE_BOUND('',#213939,.F.); +#213939 = EDGE_LOOP('',(#213940,#213941,#213950,#213958)); +#213940 = ORIENTED_EDGE('',*,*,#213919,.T.); +#213941 = ORIENTED_EDGE('',*,*,#213942,.T.); +#213942 = EDGE_CURVE('',#213912,#213943,#213945,.T.); +#213943 = VERTEX_POINT('',#213944); +#213944 = CARTESIAN_POINT('',(136.919509,-70.298079,-3.5E-02)); +#213945 = CIRCLE('',#213946,0.100000456609); +#213946 = AXIS2_PLACEMENT_3D('',#213947,#213948,#213949); +#213947 = CARTESIAN_POINT('',(136.9,-70.2,-3.5E-02)); +#213948 = DIRECTION('',(0.,0.,-1.)); +#213949 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#213950 = ORIENTED_EDGE('',*,*,#213951,.F.); +#213951 = EDGE_CURVE('',#213952,#213943,#213954,.T.); +#213952 = VERTEX_POINT('',#213953); +#213953 = CARTESIAN_POINT('',(136.919509,-70.298079,0.)); +#213954 = LINE('',#213955,#213956); +#213955 = CARTESIAN_POINT('',(136.919509,-70.298079,0.)); +#213956 = VECTOR('',#213957,1.); +#213957 = DIRECTION('',(0.,0.,-1.)); +#213958 = ORIENTED_EDGE('',*,*,#213959,.F.); +#213959 = EDGE_CURVE('',#213920,#213952,#213960,.T.); +#213960 = CIRCLE('',#213961,0.100000456609); +#213961 = AXIS2_PLACEMENT_3D('',#213962,#213963,#213964); +#213962 = CARTESIAN_POINT('',(136.9,-70.2,0.)); +#213963 = DIRECTION('',(0.,0.,-1.)); +#213964 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#213965 = CYLINDRICAL_SURFACE('',#213966,0.100000456609); +#213966 = AXIS2_PLACEMENT_3D('',#213967,#213968,#213969); +#213967 = CARTESIAN_POINT('',(136.9,-70.2,0.)); +#213968 = DIRECTION('',(-0.,-0.,1.)); +#213969 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#213970 = ADVANCED_FACE('',(#213971),#213996,.F.); +#213971 = FACE_BOUND('',#213972,.F.); +#213972 = EDGE_LOOP('',(#213973,#213974,#213982,#213990)); +#213973 = ORIENTED_EDGE('',*,*,#213951,.T.); +#213974 = ORIENTED_EDGE('',*,*,#213975,.T.); +#213975 = EDGE_CURVE('',#213943,#213976,#213978,.T.); +#213976 = VERTEX_POINT('',#213977); +#213977 = CARTESIAN_POINT('',(135.241421,-70.3,-3.5E-02)); +#213978 = LINE('',#213979,#213980); +#213979 = CARTESIAN_POINT('',(136.919509,-70.298079,-3.5E-02)); +#213980 = VECTOR('',#213981,1.); +#213981 = DIRECTION('',(-0.999999344768,-1.144754471336E-03,0.)); +#213982 = ORIENTED_EDGE('',*,*,#213983,.F.); +#213983 = EDGE_CURVE('',#213984,#213976,#213986,.T.); +#213984 = VERTEX_POINT('',#213985); +#213985 = CARTESIAN_POINT('',(135.241421,-70.3,0.)); +#213986 = LINE('',#213987,#213988); +#213987 = CARTESIAN_POINT('',(135.241421,-70.3,0.)); +#213988 = VECTOR('',#213989,1.); +#213989 = DIRECTION('',(0.,0.,-1.)); +#213990 = ORIENTED_EDGE('',*,*,#213991,.F.); +#213991 = EDGE_CURVE('',#213952,#213984,#213992,.T.); +#213992 = LINE('',#213993,#213994); +#213993 = CARTESIAN_POINT('',(136.919509,-70.298079,0.)); +#213994 = VECTOR('',#213995,1.); +#213995 = DIRECTION('',(-0.999999344768,-1.144754471336E-03,0.)); +#213996 = PLANE('',#213997); +#213997 = AXIS2_PLACEMENT_3D('',#213998,#213999,#214000); +#213998 = CARTESIAN_POINT('',(136.919509,-70.298079,0.)); +#213999 = DIRECTION('',(-1.144754471336E-03,0.999999344768,0.)); +#214000 = DIRECTION('',(-0.999999344768,-1.144754471336E-03,0.)); +#214001 = ADVANCED_FACE('',(#214002),#214027,.F.); +#214002 = FACE_BOUND('',#214003,.F.); +#214003 = EDGE_LOOP('',(#214004,#214005,#214013,#214021)); +#214004 = ORIENTED_EDGE('',*,*,#213983,.T.); +#214005 = ORIENTED_EDGE('',*,*,#214006,.T.); +#214006 = EDGE_CURVE('',#213976,#214007,#214009,.T.); +#214007 = VERTEX_POINT('',#214008); +#214008 = CARTESIAN_POINT('',(134.555557,-70.983147,-3.5E-02)); +#214009 = LINE('',#214010,#214011); +#214010 = CARTESIAN_POINT('',(135.241421,-70.3,-3.5E-02)); +#214011 = VECTOR('',#214012,1.); +#214012 = DIRECTION('',(-0.708508741352,-0.705702035868,0.)); +#214013 = ORIENTED_EDGE('',*,*,#214014,.F.); +#214014 = EDGE_CURVE('',#214015,#214007,#214017,.T.); +#214015 = VERTEX_POINT('',#214016); +#214016 = CARTESIAN_POINT('',(134.555557,-70.983147,0.)); +#214017 = LINE('',#214018,#214019); +#214018 = CARTESIAN_POINT('',(134.555557,-70.983147,0.)); +#214019 = VECTOR('',#214020,1.); +#214020 = DIRECTION('',(0.,0.,-1.)); +#214021 = ORIENTED_EDGE('',*,*,#214022,.F.); +#214022 = EDGE_CURVE('',#213984,#214015,#214023,.T.); +#214023 = LINE('',#214024,#214025); +#214024 = CARTESIAN_POINT('',(135.241421,-70.3,0.)); +#214025 = VECTOR('',#214026,1.); +#214026 = DIRECTION('',(-0.708508741352,-0.705702035868,0.)); +#214027 = PLANE('',#214028); +#214028 = AXIS2_PLACEMENT_3D('',#214029,#214030,#214031); +#214029 = CARTESIAN_POINT('',(135.241421,-70.3,0.)); +#214030 = DIRECTION('',(-0.705702035868,0.708508741352,0.)); +#214031 = DIRECTION('',(-0.708508741352,-0.705702035868,0.)); +#214032 = ADVANCED_FACE('',(#214033),#214058,.F.); +#214033 = FACE_BOUND('',#214034,.F.); +#214034 = EDGE_LOOP('',(#214035,#214036,#214044,#214052)); +#214035 = ORIENTED_EDGE('',*,*,#214014,.T.); +#214036 = ORIENTED_EDGE('',*,*,#214037,.T.); +#214037 = EDGE_CURVE('',#214007,#214038,#214040,.T.); +#214038 = VERTEX_POINT('',#214039); +#214039 = CARTESIAN_POINT('',(134.519509,-70.998079,-3.5E-02)); +#214040 = LINE('',#214041,#214042); +#214041 = CARTESIAN_POINT('',(134.555557,-70.983147,-3.5E-02)); +#214042 = VECTOR('',#214043,1.); +#214043 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#214044 = ORIENTED_EDGE('',*,*,#214045,.F.); +#214045 = EDGE_CURVE('',#214046,#214038,#214048,.T.); +#214046 = VERTEX_POINT('',#214047); +#214047 = CARTESIAN_POINT('',(134.519509,-70.998079,0.)); +#214048 = LINE('',#214049,#214050); +#214049 = CARTESIAN_POINT('',(134.519509,-70.998079,0.)); +#214050 = VECTOR('',#214051,1.); +#214051 = DIRECTION('',(0.,0.,-1.)); +#214052 = ORIENTED_EDGE('',*,*,#214053,.F.); +#214053 = EDGE_CURVE('',#214015,#214046,#214054,.T.); +#214054 = LINE('',#214055,#214056); +#214055 = CARTESIAN_POINT('',(134.555557,-70.983147,0.)); +#214056 = VECTOR('',#214057,1.); +#214057 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#214058 = PLANE('',#214059); +#214059 = AXIS2_PLACEMENT_3D('',#214060,#214061,#214062); +#214060 = CARTESIAN_POINT('',(134.555557,-70.983147,0.)); +#214061 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#214062 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#214063 = ADVANCED_FACE('',(#214064),#214089,.F.); +#214064 = FACE_BOUND('',#214065,.F.); +#214065 = EDGE_LOOP('',(#214066,#214067,#214075,#214083)); +#214066 = ORIENTED_EDGE('',*,*,#214045,.T.); +#214067 = ORIENTED_EDGE('',*,*,#214068,.T.); +#214068 = EDGE_CURVE('',#214038,#214069,#214071,.T.); +#214069 = VERTEX_POINT('',#214070); +#214070 = CARTESIAN_POINT('',(134.231131,-71.,-3.5E-02)); +#214071 = LINE('',#214072,#214073); +#214072 = CARTESIAN_POINT('',(134.519509,-70.998079,-3.5E-02)); +#214073 = VECTOR('',#214074,1.); +#214074 = DIRECTION('',(-0.999977813641,-6.661248014761E-03,0.)); +#214075 = ORIENTED_EDGE('',*,*,#214076,.F.); +#214076 = EDGE_CURVE('',#214077,#214069,#214079,.T.); +#214077 = VERTEX_POINT('',#214078); +#214078 = CARTESIAN_POINT('',(134.231131,-71.,0.)); +#214079 = LINE('',#214080,#214081); +#214080 = CARTESIAN_POINT('',(134.231131,-71.,0.)); +#214081 = VECTOR('',#214082,1.); +#214082 = DIRECTION('',(0.,0.,-1.)); +#214083 = ORIENTED_EDGE('',*,*,#214084,.F.); +#214084 = EDGE_CURVE('',#214046,#214077,#214085,.T.); +#214085 = LINE('',#214086,#214087); +#214086 = CARTESIAN_POINT('',(134.519509,-70.998079,0.)); +#214087 = VECTOR('',#214088,1.); +#214088 = DIRECTION('',(-0.999977813641,-6.661248014761E-03,0.)); +#214089 = PLANE('',#214090); +#214090 = AXIS2_PLACEMENT_3D('',#214091,#214092,#214093); +#214091 = CARTESIAN_POINT('',(134.519509,-70.998079,0.)); +#214092 = DIRECTION('',(-6.661248014761E-03,0.999977813641,0.)); +#214093 = DIRECTION('',(-0.999977813641,-6.661248014761E-03,0.)); +#214094 = ADVANCED_FACE('',(#214095),#214120,.F.); +#214095 = FACE_BOUND('',#214096,.F.); +#214096 = EDGE_LOOP('',(#214097,#214098,#214106,#214114)); +#214097 = ORIENTED_EDGE('',*,*,#214076,.T.); +#214098 = ORIENTED_EDGE('',*,*,#214099,.T.); +#214099 = EDGE_CURVE('',#214069,#214100,#214102,.T.); +#214100 = VERTEX_POINT('',#214101); +#214101 = CARTESIAN_POINT('',(134.227164,-71.014805,-3.5E-02)); +#214102 = LINE('',#214103,#214104); +#214103 = CARTESIAN_POINT('',(134.231131,-71.,-3.5E-02)); +#214104 = VECTOR('',#214105,1.); +#214105 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#214106 = ORIENTED_EDGE('',*,*,#214107,.F.); +#214107 = EDGE_CURVE('',#214108,#214100,#214110,.T.); +#214108 = VERTEX_POINT('',#214109); +#214109 = CARTESIAN_POINT('',(134.227164,-71.014805,0.)); +#214110 = LINE('',#214111,#214112); +#214111 = CARTESIAN_POINT('',(134.227164,-71.014805,0.)); +#214112 = VECTOR('',#214113,1.); +#214113 = DIRECTION('',(0.,0.,-1.)); +#214114 = ORIENTED_EDGE('',*,*,#214115,.F.); +#214115 = EDGE_CURVE('',#214077,#214108,#214116,.T.); +#214116 = LINE('',#214117,#214118); +#214117 = CARTESIAN_POINT('',(134.231131,-71.,0.)); +#214118 = VECTOR('',#214119,1.); +#214119 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#214120 = PLANE('',#214121); +#214121 = AXIS2_PLACEMENT_3D('',#214122,#214123,#214124); +#214122 = CARTESIAN_POINT('',(134.231131,-71.,0.)); +#214123 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#214124 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#214125 = ADVANCED_FACE('',(#214126),#214153,.T.); +#214126 = FACE_BOUND('',#214127,.F.); +#214127 = EDGE_LOOP('',(#214128,#214129,#214138,#214146)); +#214128 = ORIENTED_EDGE('',*,*,#214107,.T.); +#214129 = ORIENTED_EDGE('',*,*,#214130,.T.); +#214130 = EDGE_CURVE('',#214100,#214131,#214133,.T.); +#214131 = VERTEX_POINT('',#214132); +#214132 = CARTESIAN_POINT('',(134.227164,-70.785195,-3.5E-02)); +#214133 = CIRCLE('',#214134,0.299999850918); +#214134 = AXIS2_PLACEMENT_3D('',#214135,#214136,#214137); +#214135 = CARTESIAN_POINT('',(133.9500002893,-70.9,-3.5E-02)); +#214136 = DIRECTION('',(0.,0.,-1.)); +#214137 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#214138 = ORIENTED_EDGE('',*,*,#214139,.F.); +#214139 = EDGE_CURVE('',#214140,#214131,#214142,.T.); +#214140 = VERTEX_POINT('',#214141); +#214141 = CARTESIAN_POINT('',(134.227164,-70.785195,0.)); +#214142 = LINE('',#214143,#214144); +#214143 = CARTESIAN_POINT('',(134.227164,-70.785195,0.)); +#214144 = VECTOR('',#214145,1.); +#214145 = DIRECTION('',(0.,0.,-1.)); +#214146 = ORIENTED_EDGE('',*,*,#214147,.F.); +#214147 = EDGE_CURVE('',#214108,#214140,#214148,.T.); +#214148 = CIRCLE('',#214149,0.299999850918); +#214149 = AXIS2_PLACEMENT_3D('',#214150,#214151,#214152); +#214150 = CARTESIAN_POINT('',(133.9500002893,-70.9,0.)); +#214151 = DIRECTION('',(0.,0.,-1.)); +#214152 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#214153 = CYLINDRICAL_SURFACE('',#214154,0.299999850918); +#214154 = AXIS2_PLACEMENT_3D('',#214155,#214156,#214157); +#214155 = CARTESIAN_POINT('',(133.9500002893,-70.9,0.)); +#214156 = DIRECTION('',(-0.,-0.,1.)); +#214157 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#214158 = ADVANCED_FACE('',(#214159),#214184,.F.); +#214159 = FACE_BOUND('',#214160,.F.); +#214160 = EDGE_LOOP('',(#214161,#214162,#214170,#214178)); +#214161 = ORIENTED_EDGE('',*,*,#214139,.T.); +#214162 = ORIENTED_EDGE('',*,*,#214163,.T.); +#214163 = EDGE_CURVE('',#214131,#214164,#214166,.T.); +#214164 = VERTEX_POINT('',#214165); +#214165 = CARTESIAN_POINT('',(134.231131,-70.8,-3.5E-02)); +#214166 = LINE('',#214167,#214168); +#214167 = CARTESIAN_POINT('',(134.227164,-70.785195,-3.5E-02)); +#214168 = VECTOR('',#214169,1.); +#214169 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#214170 = ORIENTED_EDGE('',*,*,#214171,.F.); +#214171 = EDGE_CURVE('',#214172,#214164,#214174,.T.); +#214172 = VERTEX_POINT('',#214173); +#214173 = CARTESIAN_POINT('',(134.231131,-70.8,0.)); +#214174 = LINE('',#214175,#214176); +#214175 = CARTESIAN_POINT('',(134.231131,-70.8,0.)); +#214176 = VECTOR('',#214177,1.); +#214177 = DIRECTION('',(0.,0.,-1.)); +#214178 = ORIENTED_EDGE('',*,*,#214179,.F.); +#214179 = EDGE_CURVE('',#214140,#214172,#214180,.T.); +#214180 = LINE('',#214181,#214182); +#214181 = CARTESIAN_POINT('',(134.227164,-70.785195,0.)); +#214182 = VECTOR('',#214183,1.); +#214183 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#214184 = PLANE('',#214185); +#214185 = AXIS2_PLACEMENT_3D('',#214186,#214187,#214188); +#214186 = CARTESIAN_POINT('',(134.227164,-70.785195,0.)); +#214187 = DIRECTION('',(-0.965925627198,-0.25881978812,-0.)); +#214188 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#214189 = ADVANCED_FACE('',(#214190),#214215,.F.); +#214190 = FACE_BOUND('',#214191,.F.); +#214191 = EDGE_LOOP('',(#214192,#214193,#214201,#214209)); +#214192 = ORIENTED_EDGE('',*,*,#214171,.T.); +#214193 = ORIENTED_EDGE('',*,*,#214194,.T.); +#214194 = EDGE_CURVE('',#214164,#214195,#214197,.T.); +#214195 = VERTEX_POINT('',#214196); +#214196 = CARTESIAN_POINT('',(134.458578,-70.8,-3.5E-02)); +#214197 = LINE('',#214198,#214199); +#214198 = CARTESIAN_POINT('',(134.231131,-70.8,-3.5E-02)); +#214199 = VECTOR('',#214200,1.); +#214200 = DIRECTION('',(1.,0.,0.)); +#214201 = ORIENTED_EDGE('',*,*,#214202,.F.); +#214202 = EDGE_CURVE('',#214203,#214195,#214205,.T.); +#214203 = VERTEX_POINT('',#214204); +#214204 = CARTESIAN_POINT('',(134.458578,-70.8,0.)); +#214205 = LINE('',#214206,#214207); +#214206 = CARTESIAN_POINT('',(134.458578,-70.8,0.)); +#214207 = VECTOR('',#214208,1.); +#214208 = DIRECTION('',(0.,0.,-1.)); +#214209 = ORIENTED_EDGE('',*,*,#214210,.F.); +#214210 = EDGE_CURVE('',#214172,#214203,#214211,.T.); +#214211 = LINE('',#214212,#214213); +#214212 = CARTESIAN_POINT('',(134.231131,-70.8,0.)); +#214213 = VECTOR('',#214214,1.); +#214214 = DIRECTION('',(1.,0.,0.)); +#214215 = PLANE('',#214216); +#214216 = AXIS2_PLACEMENT_3D('',#214217,#214218,#214219); +#214217 = CARTESIAN_POINT('',(134.231131,-70.8,0.)); +#214218 = DIRECTION('',(0.,-1.,0.)); +#214219 = DIRECTION('',(1.,0.,0.)); +#214220 = ADVANCED_FACE('',(#214221),#214237,.F.); +#214221 = FACE_BOUND('',#214222,.F.); +#214222 = EDGE_LOOP('',(#214223,#214224,#214230,#214231)); +#214223 = ORIENTED_EDGE('',*,*,#214202,.T.); +#214224 = ORIENTED_EDGE('',*,*,#214225,.T.); +#214225 = EDGE_CURVE('',#214195,#213873,#214226,.T.); +#214226 = LINE('',#214227,#214228); +#214227 = CARTESIAN_POINT('',(134.458578,-70.8,-3.5E-02)); +#214228 = VECTOR('',#214229,1.); +#214229 = DIRECTION('',(0.708508741352,0.705702035868,0.)); +#214230 = ORIENTED_EDGE('',*,*,#213870,.F.); +#214231 = ORIENTED_EDGE('',*,*,#214232,.F.); +#214232 = EDGE_CURVE('',#214203,#213871,#214233,.T.); +#214233 = LINE('',#214234,#214235); +#214234 = CARTESIAN_POINT('',(134.458578,-70.8,0.)); +#214235 = VECTOR('',#214236,1.); +#214236 = DIRECTION('',(0.708508741352,0.705702035868,0.)); +#214237 = PLANE('',#214238); +#214238 = AXIS2_PLACEMENT_3D('',#214239,#214240,#214241); +#214239 = CARTESIAN_POINT('',(134.458578,-70.8,0.)); +#214240 = DIRECTION('',(0.705702035868,-0.708508741352,0.)); +#214241 = DIRECTION('',(0.708508741352,0.705702035868,0.)); +#214242 = ADVANCED_FACE('',(#214243),#214270,.F.); +#214243 = FACE_BOUND('',#214244,.F.); +#214244 = EDGE_LOOP('',(#214245,#214255,#214262,#214263)); +#214245 = ORIENTED_EDGE('',*,*,#214246,.T.); +#214246 = EDGE_CURVE('',#214247,#214249,#214251,.T.); +#214247 = VERTEX_POINT('',#214248); +#214248 = CARTESIAN_POINT('',(134.087255,-70.9,0.)); +#214249 = VERTEX_POINT('',#214250); +#214250 = CARTESIAN_POINT('',(134.087255,-70.9,-3.5E-02)); +#214251 = LINE('',#214252,#214253); +#214252 = CARTESIAN_POINT('',(134.087255,-70.9,0.)); +#214253 = VECTOR('',#214254,1.); +#214254 = DIRECTION('',(0.,0.,-1.)); +#214255 = ORIENTED_EDGE('',*,*,#214256,.T.); +#214256 = EDGE_CURVE('',#214249,#214249,#214257,.T.); +#214257 = CIRCLE('',#214258,0.137255); +#214258 = AXIS2_PLACEMENT_3D('',#214259,#214260,#214261); +#214259 = CARTESIAN_POINT('',(133.95,-70.9,-3.5E-02)); +#214260 = DIRECTION('',(0.,0.,1.)); +#214261 = DIRECTION('',(1.,0.,-0.)); +#214262 = ORIENTED_EDGE('',*,*,#214246,.F.); +#214263 = ORIENTED_EDGE('',*,*,#214264,.F.); +#214264 = EDGE_CURVE('',#214247,#214247,#214265,.T.); +#214265 = CIRCLE('',#214266,0.137255); +#214266 = AXIS2_PLACEMENT_3D('',#214267,#214268,#214269); +#214267 = CARTESIAN_POINT('',(133.95,-70.9,0.)); +#214268 = DIRECTION('',(0.,0.,1.)); +#214269 = DIRECTION('',(1.,0.,-0.)); +#214270 = CYLINDRICAL_SURFACE('',#214271,0.137255); +#214271 = AXIS2_PLACEMENT_3D('',#214272,#214273,#214274); +#214272 = CARTESIAN_POINT('',(133.95,-70.9,0.)); +#214273 = DIRECTION('',(0.,0.,1.)); +#214274 = DIRECTION('',(1.,0.,-0.)); +#214275 = ADVANCED_FACE('',(#214276,#214290),#214293,.F.); +#214276 = FACE_BOUND('',#214277,.F.); +#214277 = EDGE_LOOP('',(#214278,#214279,#214280,#214281,#214282,#214283, + #214284,#214285,#214286,#214287,#214288,#214289)); +#214278 = ORIENTED_EDGE('',*,*,#213896,.T.); +#214279 = ORIENTED_EDGE('',*,*,#213927,.T.); +#214280 = ORIENTED_EDGE('',*,*,#213959,.T.); +#214281 = ORIENTED_EDGE('',*,*,#213991,.T.); +#214282 = ORIENTED_EDGE('',*,*,#214022,.T.); +#214283 = ORIENTED_EDGE('',*,*,#214053,.T.); +#214284 = ORIENTED_EDGE('',*,*,#214084,.T.); +#214285 = ORIENTED_EDGE('',*,*,#214115,.T.); +#214286 = ORIENTED_EDGE('',*,*,#214147,.T.); +#214287 = ORIENTED_EDGE('',*,*,#214179,.T.); +#214288 = ORIENTED_EDGE('',*,*,#214210,.T.); +#214289 = ORIENTED_EDGE('',*,*,#214232,.T.); +#214290 = FACE_BOUND('',#214291,.F.); +#214291 = EDGE_LOOP('',(#214292)); +#214292 = ORIENTED_EDGE('',*,*,#214264,.T.); +#214293 = PLANE('',#214294); +#214294 = AXIS2_PLACEMENT_3D('',#214295,#214296,#214297); +#214295 = CARTESIAN_POINT('',(0.,0.,0.)); +#214296 = DIRECTION('',(-0.,-0.,-1.)); +#214297 = DIRECTION('',(-1.,0.,0.)); +#214298 = ADVANCED_FACE('',(#214299,#214313),#214316,.T.); +#214299 = FACE_BOUND('',#214300,.T.); +#214300 = EDGE_LOOP('',(#214301,#214302,#214303,#214304,#214305,#214306, + #214307,#214308,#214309,#214310,#214311,#214312)); +#214301 = ORIENTED_EDGE('',*,*,#213880,.T.); +#214302 = ORIENTED_EDGE('',*,*,#213911,.T.); +#214303 = ORIENTED_EDGE('',*,*,#213942,.T.); +#214304 = ORIENTED_EDGE('',*,*,#213975,.T.); +#214305 = ORIENTED_EDGE('',*,*,#214006,.T.); +#214306 = ORIENTED_EDGE('',*,*,#214037,.T.); +#214307 = ORIENTED_EDGE('',*,*,#214068,.T.); +#214308 = ORIENTED_EDGE('',*,*,#214099,.T.); +#214309 = ORIENTED_EDGE('',*,*,#214130,.T.); +#214310 = ORIENTED_EDGE('',*,*,#214163,.T.); +#214311 = ORIENTED_EDGE('',*,*,#214194,.T.); +#214312 = ORIENTED_EDGE('',*,*,#214225,.T.); +#214313 = FACE_BOUND('',#214314,.T.); +#214314 = EDGE_LOOP('',(#214315)); +#214315 = ORIENTED_EDGE('',*,*,#214256,.T.); +#214316 = PLANE('',#214317); +#214317 = AXIS2_PLACEMENT_3D('',#214318,#214319,#214320); +#214318 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#214319 = DIRECTION('',(-0.,-0.,-1.)); +#214320 = DIRECTION('',(-1.,0.,0.)); +#214321 = MANIFOLD_SOLID_BREP('',#214322); +#214322 = CLOSED_SHELL('',(#214323,#214363,#214394,#214425,#214458, + #214489,#214520,#214551,#214584,#214606,#214639,#214659)); +#214323 = ADVANCED_FACE('',(#214324),#214358,.T.); +#214324 = FACE_BOUND('',#214325,.T.); +#214325 = EDGE_LOOP('',(#214326,#214336,#214344,#214352)); +#214326 = ORIENTED_EDGE('',*,*,#214327,.T.); +#214327 = EDGE_CURVE('',#214328,#214330,#214332,.T.); +#214328 = VERTEX_POINT('',#214329); +#214329 = CARTESIAN_POINT('',(141.408147,-82.504443,1.51)); +#214330 = VERTEX_POINT('',#214331); +#214331 = CARTESIAN_POINT('',(141.408147,-82.504443,1.545)); +#214332 = LINE('',#214333,#214334); +#214333 = CARTESIAN_POINT('',(141.408147,-82.504443,1.51)); +#214334 = VECTOR('',#214335,1.); +#214335 = DIRECTION('',(0.,0.,1.)); +#214336 = ORIENTED_EDGE('',*,*,#214337,.T.); +#214337 = EDGE_CURVE('',#214330,#214338,#214340,.T.); +#214338 = VERTEX_POINT('',#214339); +#214339 = CARTESIAN_POINT('',(141.423079,-82.540491,1.545)); +#214340 = LINE('',#214341,#214342); +#214341 = CARTESIAN_POINT('',(141.408147,-82.504443,1.545)); +#214342 = VECTOR('',#214343,1.); +#214343 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#214344 = ORIENTED_EDGE('',*,*,#214345,.F.); +#214345 = EDGE_CURVE('',#214346,#214338,#214348,.T.); +#214346 = VERTEX_POINT('',#214347); +#214347 = CARTESIAN_POINT('',(141.423079,-82.540491,1.51)); +#214348 = LINE('',#214349,#214350); +#214349 = CARTESIAN_POINT('',(141.423079,-82.540491,1.51)); +#214350 = VECTOR('',#214351,1.); +#214351 = DIRECTION('',(0.,0.,1.)); +#214352 = ORIENTED_EDGE('',*,*,#214353,.F.); +#214353 = EDGE_CURVE('',#214328,#214346,#214354,.T.); +#214354 = LINE('',#214355,#214356); +#214355 = CARTESIAN_POINT('',(141.408147,-82.504443,1.51)); +#214356 = VECTOR('',#214357,1.); +#214357 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#214358 = PLANE('',#214359); +#214359 = AXIS2_PLACEMENT_3D('',#214360,#214361,#214362); +#214360 = CARTESIAN_POINT('',(141.408147,-82.504443,1.51)); +#214361 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#214362 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#214363 = ADVANCED_FACE('',(#214364),#214389,.T.); +#214364 = FACE_BOUND('',#214365,.T.); +#214365 = EDGE_LOOP('',(#214366,#214367,#214375,#214383)); +#214366 = ORIENTED_EDGE('',*,*,#214345,.T.); +#214367 = ORIENTED_EDGE('',*,*,#214368,.T.); +#214368 = EDGE_CURVE('',#214338,#214369,#214371,.T.); +#214369 = VERTEX_POINT('',#214370); +#214370 = CARTESIAN_POINT('',(141.425,-98.528722,1.545)); +#214371 = LINE('',#214372,#214373); +#214372 = CARTESIAN_POINT('',(141.423079,-82.540491,1.545)); +#214373 = VECTOR('',#214374,1.); +#214374 = DIRECTION('',(1.201508776139E-04,-0.999999992782,0.)); +#214375 = ORIENTED_EDGE('',*,*,#214376,.F.); +#214376 = EDGE_CURVE('',#214377,#214369,#214379,.T.); +#214377 = VERTEX_POINT('',#214378); +#214378 = CARTESIAN_POINT('',(141.425,-98.528722,1.51)); +#214379 = LINE('',#214380,#214381); +#214380 = CARTESIAN_POINT('',(141.425,-98.528722,1.51)); +#214381 = VECTOR('',#214382,1.); +#214382 = DIRECTION('',(0.,0.,1.)); +#214383 = ORIENTED_EDGE('',*,*,#214384,.F.); +#214384 = EDGE_CURVE('',#214346,#214377,#214385,.T.); +#214385 = LINE('',#214386,#214387); +#214386 = CARTESIAN_POINT('',(141.423079,-82.540491,1.51)); +#214387 = VECTOR('',#214388,1.); +#214388 = DIRECTION('',(1.201508776139E-04,-0.999999992782,0.)); +#214389 = PLANE('',#214390); +#214390 = AXIS2_PLACEMENT_3D('',#214391,#214392,#214393); +#214391 = CARTESIAN_POINT('',(141.423079,-82.540491,1.51)); +#214392 = DIRECTION('',(0.999999992782,1.201508776139E-04,-0.)); +#214393 = DIRECTION('',(1.201508776139E-04,-0.999999992782,0.)); +#214394 = ADVANCED_FACE('',(#214395),#214420,.T.); +#214395 = FACE_BOUND('',#214396,.T.); +#214396 = EDGE_LOOP('',(#214397,#214398,#214406,#214414)); +#214397 = ORIENTED_EDGE('',*,*,#214376,.T.); +#214398 = ORIENTED_EDGE('',*,*,#214399,.T.); +#214399 = EDGE_CURVE('',#214369,#214400,#214402,.T.); +#214400 = VERTEX_POINT('',#214401); +#214401 = CARTESIAN_POINT('',(141.482628,-98.561994,1.545)); +#214402 = LINE('',#214403,#214404); +#214403 = CARTESIAN_POINT('',(141.425,-98.528722,1.545)); +#214404 = VECTOR('',#214405,1.); +#214405 = DIRECTION('',(0.866022418986,-0.500005169787,0.)); +#214406 = ORIENTED_EDGE('',*,*,#214407,.F.); +#214407 = EDGE_CURVE('',#214408,#214400,#214410,.T.); +#214408 = VERTEX_POINT('',#214409); +#214409 = CARTESIAN_POINT('',(141.482628,-98.561994,1.51)); +#214410 = LINE('',#214411,#214412); +#214411 = CARTESIAN_POINT('',(141.482628,-98.561994,1.51)); +#214412 = VECTOR('',#214413,1.); +#214413 = DIRECTION('',(0.,0.,1.)); +#214414 = ORIENTED_EDGE('',*,*,#214415,.F.); +#214415 = EDGE_CURVE('',#214377,#214408,#214416,.T.); +#214416 = LINE('',#214417,#214418); +#214417 = CARTESIAN_POINT('',(141.425,-98.528722,1.51)); +#214418 = VECTOR('',#214419,1.); +#214419 = DIRECTION('',(0.866022418986,-0.500005169787,0.)); +#214420 = PLANE('',#214421); +#214421 = AXIS2_PLACEMENT_3D('',#214422,#214423,#214424); +#214422 = CARTESIAN_POINT('',(141.425,-98.528722,1.51)); +#214423 = DIRECTION('',(0.500005169787,0.866022418986,-0.)); +#214424 = DIRECTION('',(0.866022418986,-0.500005169787,0.)); +#214425 = ADVANCED_FACE('',(#214426),#214453,.T.); +#214426 = FACE_BOUND('',#214427,.T.); +#214427 = EDGE_LOOP('',(#214428,#214429,#214438,#214446)); +#214428 = ORIENTED_EDGE('',*,*,#214407,.T.); +#214429 = ORIENTED_EDGE('',*,*,#214430,.T.); +#214430 = EDGE_CURVE('',#214400,#214431,#214433,.T.); +#214431 = VERTEX_POINT('',#214432); +#214432 = CARTESIAN_POINT('',(141.185195,-98.522836,1.545)); +#214433 = CIRCLE('',#214434,0.299999758992); +#214434 = AXIS2_PLACEMENT_3D('',#214435,#214436,#214437); +#214435 = CARTESIAN_POINT('',(141.29999964786,-98.79999975705,1.545)); +#214436 = DIRECTION('',(0.,0.,-1.)); +#214437 = DIRECTION('',(0.608761662845,0.793353160862,0.)); +#214438 = ORIENTED_EDGE('',*,*,#214439,.F.); +#214439 = EDGE_CURVE('',#214440,#214431,#214442,.T.); +#214440 = VERTEX_POINT('',#214441); +#214441 = CARTESIAN_POINT('',(141.185195,-98.522836,1.51)); +#214442 = LINE('',#214443,#214444); +#214443 = CARTESIAN_POINT('',(141.185195,-98.522836,1.51)); +#214444 = VECTOR('',#214445,1.); +#214445 = DIRECTION('',(0.,0.,1.)); +#214446 = ORIENTED_EDGE('',*,*,#214447,.F.); +#214447 = EDGE_CURVE('',#214408,#214440,#214448,.T.); +#214448 = CIRCLE('',#214449,0.299999758992); +#214449 = AXIS2_PLACEMENT_3D('',#214450,#214451,#214452); +#214450 = CARTESIAN_POINT('',(141.29999964786,-98.79999975705,1.51)); +#214451 = DIRECTION('',(0.,0.,-1.)); +#214452 = DIRECTION('',(0.608761662845,0.793353160862,0.)); +#214453 = CYLINDRICAL_SURFACE('',#214454,0.299999758992); +#214454 = AXIS2_PLACEMENT_3D('',#214455,#214456,#214457); +#214455 = CARTESIAN_POINT('',(141.29999964786,-98.79999975705,1.51)); +#214456 = DIRECTION('',(0.,0.,-1.)); +#214457 = DIRECTION('',(0.608761662845,0.793353160862,0.)); +#214458 = ADVANCED_FACE('',(#214459),#214484,.T.); +#214459 = FACE_BOUND('',#214460,.T.); +#214460 = EDGE_LOOP('',(#214461,#214462,#214470,#214478)); +#214461 = ORIENTED_EDGE('',*,*,#214439,.T.); +#214462 = ORIENTED_EDGE('',*,*,#214463,.T.); +#214463 = EDGE_CURVE('',#214431,#214464,#214466,.T.); +#214464 = VERTEX_POINT('',#214465); +#214465 = CARTESIAN_POINT('',(141.225,-98.51217,1.545)); +#214466 = LINE('',#214467,#214468); +#214467 = CARTESIAN_POINT('',(141.185195,-98.522836,1.545)); +#214468 = VECTOR('',#214469,1.); +#214469 = DIRECTION('',(0.965924113089,0.258825438769,0.)); +#214470 = ORIENTED_EDGE('',*,*,#214471,.F.); +#214471 = EDGE_CURVE('',#214472,#214464,#214474,.T.); +#214472 = VERTEX_POINT('',#214473); +#214473 = CARTESIAN_POINT('',(141.225,-98.51217,1.51)); +#214474 = LINE('',#214475,#214476); +#214475 = CARTESIAN_POINT('',(141.225,-98.51217,1.51)); +#214476 = VECTOR('',#214477,1.); +#214477 = DIRECTION('',(0.,0.,1.)); +#214478 = ORIENTED_EDGE('',*,*,#214479,.F.); +#214479 = EDGE_CURVE('',#214440,#214472,#214480,.T.); +#214480 = LINE('',#214481,#214482); +#214481 = CARTESIAN_POINT('',(141.185195,-98.522836,1.51)); +#214482 = VECTOR('',#214483,1.); +#214483 = DIRECTION('',(0.965924113089,0.258825438769,0.)); +#214484 = PLANE('',#214485); +#214485 = AXIS2_PLACEMENT_3D('',#214486,#214487,#214488); +#214486 = CARTESIAN_POINT('',(141.185195,-98.522836,1.51)); +#214487 = DIRECTION('',(-0.258825438769,0.965924113089,0.)); +#214488 = DIRECTION('',(0.965924113089,0.258825438769,0.)); +#214489 = ADVANCED_FACE('',(#214490),#214515,.T.); +#214490 = FACE_BOUND('',#214491,.T.); +#214491 = EDGE_LOOP('',(#214492,#214493,#214501,#214509)); +#214492 = ORIENTED_EDGE('',*,*,#214471,.T.); +#214493 = ORIENTED_EDGE('',*,*,#214494,.T.); +#214494 = EDGE_CURVE('',#214464,#214495,#214497,.T.); +#214495 = VERTEX_POINT('',#214496); +#214496 = CARTESIAN_POINT('',(141.225,-82.601422,1.545)); +#214497 = LINE('',#214498,#214499); +#214498 = CARTESIAN_POINT('',(141.225,-98.51217,1.545)); +#214499 = VECTOR('',#214500,1.); +#214500 = DIRECTION('',(0.,1.,0.)); +#214501 = ORIENTED_EDGE('',*,*,#214502,.F.); +#214502 = EDGE_CURVE('',#214503,#214495,#214505,.T.); +#214503 = VERTEX_POINT('',#214504); +#214504 = CARTESIAN_POINT('',(141.225,-82.601422,1.51)); +#214505 = LINE('',#214506,#214507); +#214506 = CARTESIAN_POINT('',(141.225,-82.601422,1.51)); +#214507 = VECTOR('',#214508,1.); +#214508 = DIRECTION('',(0.,0.,1.)); +#214509 = ORIENTED_EDGE('',*,*,#214510,.F.); +#214510 = EDGE_CURVE('',#214472,#214503,#214511,.T.); +#214511 = LINE('',#214512,#214513); +#214512 = CARTESIAN_POINT('',(141.225,-98.51217,1.51)); +#214513 = VECTOR('',#214514,1.); +#214514 = DIRECTION('',(0.,1.,0.)); +#214515 = PLANE('',#214516); +#214516 = AXIS2_PLACEMENT_3D('',#214517,#214518,#214519); +#214517 = CARTESIAN_POINT('',(141.225,-98.51217,1.51)); +#214518 = DIRECTION('',(-1.,0.,0.)); +#214519 = DIRECTION('',(0.,1.,0.)); +#214520 = ADVANCED_FACE('',(#214521),#214546,.T.); +#214521 = FACE_BOUND('',#214522,.T.); +#214522 = EDGE_LOOP('',(#214523,#214524,#214532,#214540)); +#214523 = ORIENTED_EDGE('',*,*,#214502,.T.); +#214524 = ORIENTED_EDGE('',*,*,#214525,.T.); +#214525 = EDGE_CURVE('',#214495,#214526,#214528,.T.); +#214526 = VERTEX_POINT('',#214527); +#214527 = CARTESIAN_POINT('',(141.091853,-82.465557,1.545)); +#214528 = LINE('',#214529,#214530); +#214529 = CARTESIAN_POINT('',(141.225,-82.601422,1.545)); +#214530 = VECTOR('',#214531,1.); +#214531 = DIRECTION('',(-0.699926705313,0.714214678643,0.)); +#214532 = ORIENTED_EDGE('',*,*,#214533,.F.); +#214533 = EDGE_CURVE('',#214534,#214526,#214536,.T.); +#214534 = VERTEX_POINT('',#214535); +#214535 = CARTESIAN_POINT('',(141.091853,-82.465557,1.51)); +#214536 = LINE('',#214537,#214538); +#214537 = CARTESIAN_POINT('',(141.091853,-82.465557,1.51)); +#214538 = VECTOR('',#214539,1.); +#214539 = DIRECTION('',(0.,0.,1.)); +#214540 = ORIENTED_EDGE('',*,*,#214541,.F.); +#214541 = EDGE_CURVE('',#214503,#214534,#214542,.T.); +#214542 = LINE('',#214543,#214544); +#214543 = CARTESIAN_POINT('',(141.225,-82.601422,1.51)); +#214544 = VECTOR('',#214545,1.); +#214545 = DIRECTION('',(-0.699926705313,0.714214678643,0.)); +#214546 = PLANE('',#214547); +#214547 = AXIS2_PLACEMENT_3D('',#214548,#214549,#214550); +#214548 = CARTESIAN_POINT('',(141.225,-82.601422,1.51)); +#214549 = DIRECTION('',(-0.714214678643,-0.699926705313,0.)); +#214550 = DIRECTION('',(-0.699926705313,0.714214678643,0.)); +#214551 = ADVANCED_FACE('',(#214552),#214579,.T.); +#214552 = FACE_BOUND('',#214553,.T.); +#214553 = EDGE_LOOP('',(#214554,#214555,#214564,#214572)); +#214554 = ORIENTED_EDGE('',*,*,#214533,.T.); +#214555 = ORIENTED_EDGE('',*,*,#214556,.T.); +#214556 = EDGE_CURVE('',#214526,#214557,#214559,.T.); +#214557 = VERTEX_POINT('',#214558); +#214558 = CARTESIAN_POINT('',(141.230557,-82.326853,1.545)); +#214559 = CIRCLE('',#214560,9.999988522644E-02); +#214560 = AXIS2_PLACEMENT_3D('',#214561,#214562,#214563); +#214561 = CARTESIAN_POINT('',(141.17499951407,-82.40999951407,1.545)); +#214562 = DIRECTION('',(0.,0.,-1.)); +#214563 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#214564 = ORIENTED_EDGE('',*,*,#214565,.F.); +#214565 = EDGE_CURVE('',#214566,#214557,#214568,.T.); +#214566 = VERTEX_POINT('',#214567); +#214567 = CARTESIAN_POINT('',(141.230557,-82.326853,1.51)); +#214568 = LINE('',#214569,#214570); +#214569 = CARTESIAN_POINT('',(141.230557,-82.326853,1.51)); +#214570 = VECTOR('',#214571,1.); +#214571 = DIRECTION('',(0.,0.,1.)); +#214572 = ORIENTED_EDGE('',*,*,#214573,.F.); +#214573 = EDGE_CURVE('',#214534,#214566,#214574,.T.); +#214574 = CIRCLE('',#214575,9.999988522644E-02); +#214575 = AXIS2_PLACEMENT_3D('',#214576,#214577,#214578); +#214576 = CARTESIAN_POINT('',(141.17499951407,-82.40999951407,1.51)); +#214577 = DIRECTION('',(0.,0.,-1.)); +#214578 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#214579 = CYLINDRICAL_SURFACE('',#214580,9.999988522644E-02); +#214580 = AXIS2_PLACEMENT_3D('',#214581,#214582,#214583); +#214581 = CARTESIAN_POINT('',(141.17499951407,-82.40999951407,1.51)); +#214582 = DIRECTION('',(0.,0.,-1.)); +#214583 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#214584 = ADVANCED_FACE('',(#214585),#214601,.T.); +#214585 = FACE_BOUND('',#214586,.T.); +#214586 = EDGE_LOOP('',(#214587,#214588,#214594,#214595)); +#214587 = ORIENTED_EDGE('',*,*,#214565,.T.); +#214588 = ORIENTED_EDGE('',*,*,#214589,.T.); +#214589 = EDGE_CURVE('',#214557,#214330,#214590,.T.); +#214590 = LINE('',#214591,#214592); +#214591 = CARTESIAN_POINT('',(141.230557,-82.326853,1.545)); +#214592 = VECTOR('',#214593,1.); +#214593 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#214594 = ORIENTED_EDGE('',*,*,#214327,.F.); +#214595 = ORIENTED_EDGE('',*,*,#214596,.F.); +#214596 = EDGE_CURVE('',#214566,#214328,#214597,.T.); +#214597 = LINE('',#214598,#214599); +#214598 = CARTESIAN_POINT('',(141.230557,-82.326853,1.51)); +#214599 = VECTOR('',#214600,1.); +#214600 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#214601 = PLANE('',#214602); +#214602 = AXIS2_PLACEMENT_3D('',#214603,#214604,#214605); +#214603 = CARTESIAN_POINT('',(141.230557,-82.326853,1.51)); +#214604 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#214605 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#214606 = ADVANCED_FACE('',(#214607),#214634,.F.); +#214607 = FACE_BOUND('',#214608,.T.); +#214608 = EDGE_LOOP('',(#214609,#214619,#214626,#214627)); +#214609 = ORIENTED_EDGE('',*,*,#214610,.T.); +#214610 = EDGE_CURVE('',#214611,#214613,#214615,.T.); +#214611 = VERTEX_POINT('',#214612); +#214612 = CARTESIAN_POINT('',(141.437255,-98.8,1.51)); +#214613 = VERTEX_POINT('',#214614); +#214614 = CARTESIAN_POINT('',(141.437255,-98.8,1.545)); +#214615 = LINE('',#214616,#214617); +#214616 = CARTESIAN_POINT('',(141.437255,-98.8,1.51)); +#214617 = VECTOR('',#214618,1.); +#214618 = DIRECTION('',(0.,0.,1.)); +#214619 = ORIENTED_EDGE('',*,*,#214620,.T.); +#214620 = EDGE_CURVE('',#214613,#214613,#214621,.T.); +#214621 = CIRCLE('',#214622,0.137255); +#214622 = AXIS2_PLACEMENT_3D('',#214623,#214624,#214625); +#214623 = CARTESIAN_POINT('',(141.3,-98.8,1.545)); +#214624 = DIRECTION('',(0.,0.,1.)); +#214625 = DIRECTION('',(1.,0.,-0.)); +#214626 = ORIENTED_EDGE('',*,*,#214610,.F.); +#214627 = ORIENTED_EDGE('',*,*,#214628,.F.); +#214628 = EDGE_CURVE('',#214611,#214611,#214629,.T.); +#214629 = CIRCLE('',#214630,0.137255); +#214630 = AXIS2_PLACEMENT_3D('',#214631,#214632,#214633); +#214631 = CARTESIAN_POINT('',(141.3,-98.8,1.51)); +#214632 = DIRECTION('',(0.,0.,1.)); +#214633 = DIRECTION('',(1.,0.,-0.)); +#214634 = CYLINDRICAL_SURFACE('',#214635,0.137255); +#214635 = AXIS2_PLACEMENT_3D('',#214636,#214637,#214638); +#214636 = CARTESIAN_POINT('',(141.3,-98.8,1.51)); +#214637 = DIRECTION('',(-0.,-0.,-1.)); +#214638 = DIRECTION('',(1.,0.,-0.)); +#214639 = ADVANCED_FACE('',(#214640,#214651),#214654,.F.); +#214640 = FACE_BOUND('',#214641,.T.); +#214641 = EDGE_LOOP('',(#214642,#214643,#214644,#214645,#214646,#214647, + #214648,#214649,#214650)); +#214642 = ORIENTED_EDGE('',*,*,#214353,.T.); +#214643 = ORIENTED_EDGE('',*,*,#214384,.T.); +#214644 = ORIENTED_EDGE('',*,*,#214415,.T.); +#214645 = ORIENTED_EDGE('',*,*,#214447,.T.); +#214646 = ORIENTED_EDGE('',*,*,#214479,.T.); +#214647 = ORIENTED_EDGE('',*,*,#214510,.T.); +#214648 = ORIENTED_EDGE('',*,*,#214541,.T.); +#214649 = ORIENTED_EDGE('',*,*,#214573,.T.); +#214650 = ORIENTED_EDGE('',*,*,#214596,.T.); +#214651 = FACE_BOUND('',#214652,.T.); +#214652 = EDGE_LOOP('',(#214653)); +#214653 = ORIENTED_EDGE('',*,*,#214628,.T.); +#214654 = PLANE('',#214655); +#214655 = AXIS2_PLACEMENT_3D('',#214656,#214657,#214658); +#214656 = CARTESIAN_POINT('',(0.,0.,1.51)); +#214657 = DIRECTION('',(0.,0.,1.)); +#214658 = DIRECTION('',(1.,0.,-0.)); +#214659 = ADVANCED_FACE('',(#214660,#214671),#214674,.T.); +#214660 = FACE_BOUND('',#214661,.F.); +#214661 = EDGE_LOOP('',(#214662,#214663,#214664,#214665,#214666,#214667, + #214668,#214669,#214670)); +#214662 = ORIENTED_EDGE('',*,*,#214337,.T.); +#214663 = ORIENTED_EDGE('',*,*,#214368,.T.); +#214664 = ORIENTED_EDGE('',*,*,#214399,.T.); +#214665 = ORIENTED_EDGE('',*,*,#214430,.T.); +#214666 = ORIENTED_EDGE('',*,*,#214463,.T.); +#214667 = ORIENTED_EDGE('',*,*,#214494,.T.); +#214668 = ORIENTED_EDGE('',*,*,#214525,.T.); +#214669 = ORIENTED_EDGE('',*,*,#214556,.T.); +#214670 = ORIENTED_EDGE('',*,*,#214589,.T.); +#214671 = FACE_BOUND('',#214672,.F.); +#214672 = EDGE_LOOP('',(#214673)); +#214673 = ORIENTED_EDGE('',*,*,#214620,.T.); +#214674 = PLANE('',#214675); +#214675 = AXIS2_PLACEMENT_3D('',#214676,#214677,#214678); +#214676 = CARTESIAN_POINT('',(0.,0.,1.545)); +#214677 = DIRECTION('',(0.,0.,1.)); +#214678 = DIRECTION('',(1.,0.,-0.)); +#214679 = MANIFOLD_SOLID_BREP('',#214680); +#214680 = CLOSED_SHELL('',(#214681,#214721,#214752,#214785,#214816, + #214847,#214878,#214909,#214942,#214964,#214997,#215017)); +#214681 = ADVANCED_FACE('',(#214682),#214716,.F.); +#214682 = FACE_BOUND('',#214683,.F.); +#214683 = EDGE_LOOP('',(#214684,#214694,#214702,#214710)); +#214684 = ORIENTED_EDGE('',*,*,#214685,.T.); +#214685 = EDGE_CURVE('',#214686,#214688,#214690,.T.); +#214686 = VERTEX_POINT('',#214687); +#214687 = CARTESIAN_POINT('',(141.018869,-98.9,0.)); +#214688 = VERTEX_POINT('',#214689); +#214689 = CARTESIAN_POINT('',(141.018869,-98.9,-3.5E-02)); +#214690 = LINE('',#214691,#214692); +#214691 = CARTESIAN_POINT('',(141.018869,-98.9,0.)); +#214692 = VECTOR('',#214693,1.); +#214693 = DIRECTION('',(0.,0.,-1.)); +#214694 = ORIENTED_EDGE('',*,*,#214695,.T.); +#214695 = EDGE_CURVE('',#214688,#214696,#214698,.T.); +#214696 = VERTEX_POINT('',#214697); +#214697 = CARTESIAN_POINT('',(136.491422,-98.9,-3.5E-02)); +#214698 = LINE('',#214699,#214700); +#214699 = CARTESIAN_POINT('',(141.018869,-98.9,-3.5E-02)); +#214700 = VECTOR('',#214701,1.); +#214701 = DIRECTION('',(-1.,0.,0.)); +#214702 = ORIENTED_EDGE('',*,*,#214703,.F.); +#214703 = EDGE_CURVE('',#214704,#214696,#214706,.T.); +#214704 = VERTEX_POINT('',#214705); +#214705 = CARTESIAN_POINT('',(136.491422,-98.9,0.)); +#214706 = LINE('',#214707,#214708); +#214707 = CARTESIAN_POINT('',(136.491422,-98.9,0.)); +#214708 = VECTOR('',#214709,1.); +#214709 = DIRECTION('',(0.,0.,-1.)); +#214710 = ORIENTED_EDGE('',*,*,#214711,.F.); +#214711 = EDGE_CURVE('',#214686,#214704,#214712,.T.); +#214712 = LINE('',#214713,#214714); +#214713 = CARTESIAN_POINT('',(141.018869,-98.9,0.)); +#214714 = VECTOR('',#214715,1.); +#214715 = DIRECTION('',(-1.,0.,0.)); +#214716 = PLANE('',#214717); +#214717 = AXIS2_PLACEMENT_3D('',#214718,#214719,#214720); +#214718 = CARTESIAN_POINT('',(141.018869,-98.9,0.)); +#214719 = DIRECTION('',(0.,1.,0.)); +#214720 = DIRECTION('',(-1.,0.,0.)); +#214721 = ADVANCED_FACE('',(#214722),#214747,.F.); +#214722 = FACE_BOUND('',#214723,.F.); +#214723 = EDGE_LOOP('',(#214724,#214725,#214733,#214741)); +#214724 = ORIENTED_EDGE('',*,*,#214703,.T.); +#214725 = ORIENTED_EDGE('',*,*,#214726,.T.); +#214726 = EDGE_CURVE('',#214696,#214727,#214729,.T.); +#214727 = VERTEX_POINT('',#214728); +#214728 = CARTESIAN_POINT('',(134.745194,-100.644056,-3.5E-02)); +#214729 = LINE('',#214730,#214731); +#214730 = CARTESIAN_POINT('',(136.491422,-98.9,-3.5E-02)); +#214731 = VECTOR('',#214732,1.); +#214732 = DIRECTION('',(-0.707546675979,-0.706666612563,0.)); +#214733 = ORIENTED_EDGE('',*,*,#214734,.F.); +#214734 = EDGE_CURVE('',#214735,#214727,#214737,.T.); +#214735 = VERTEX_POINT('',#214736); +#214736 = CARTESIAN_POINT('',(134.745194,-100.644056,0.)); +#214737 = LINE('',#214738,#214739); +#214738 = CARTESIAN_POINT('',(134.745194,-100.644056,0.)); +#214739 = VECTOR('',#214740,1.); +#214740 = DIRECTION('',(0.,0.,-1.)); +#214741 = ORIENTED_EDGE('',*,*,#214742,.F.); +#214742 = EDGE_CURVE('',#214704,#214735,#214743,.T.); +#214743 = LINE('',#214744,#214745); +#214744 = CARTESIAN_POINT('',(136.491422,-98.9,0.)); +#214745 = VECTOR('',#214746,1.); +#214746 = DIRECTION('',(-0.707546675979,-0.706666612563,0.)); +#214747 = PLANE('',#214748); +#214748 = AXIS2_PLACEMENT_3D('',#214749,#214750,#214751); +#214749 = CARTESIAN_POINT('',(136.491422,-98.9,0.)); +#214750 = DIRECTION('',(-0.706666612563,0.707546675979,0.)); +#214751 = DIRECTION('',(-0.707546675979,-0.706666612563,0.)); +#214752 = ADVANCED_FACE('',(#214753),#214780,.F.); +#214753 = FACE_BOUND('',#214754,.F.); +#214754 = EDGE_LOOP('',(#214755,#214756,#214765,#214773)); +#214755 = ORIENTED_EDGE('',*,*,#214734,.T.); +#214756 = ORIENTED_EDGE('',*,*,#214757,.T.); +#214757 = EDGE_CURVE('',#214727,#214758,#214760,.T.); +#214758 = VERTEX_POINT('',#214759); +#214759 = CARTESIAN_POINT('',(134.606271,-100.505024,-3.5E-02)); +#214760 = CIRCLE('',#214761,0.406475878041); +#214761 = AXIS2_PLACEMENT_3D('',#214762,#214763,#214764); +#214762 = CARTESIAN_POINT('',(134.39672777338,-100.853325989,-3.5E-02)); +#214763 = DIRECTION('',(0.,0.,1.)); +#214764 = DIRECTION('',(0.857286361732,0.514839872181,-0.)); +#214765 = ORIENTED_EDGE('',*,*,#214766,.F.); +#214766 = EDGE_CURVE('',#214767,#214758,#214769,.T.); +#214767 = VERTEX_POINT('',#214768); +#214768 = CARTESIAN_POINT('',(134.606271,-100.505024,0.)); +#214769 = LINE('',#214770,#214771); +#214770 = CARTESIAN_POINT('',(134.606271,-100.505024,0.)); +#214771 = VECTOR('',#214772,1.); +#214772 = DIRECTION('',(0.,0.,-1.)); +#214773 = ORIENTED_EDGE('',*,*,#214774,.F.); +#214774 = EDGE_CURVE('',#214735,#214767,#214775,.T.); +#214775 = CIRCLE('',#214776,0.406475878041); +#214776 = AXIS2_PLACEMENT_3D('',#214777,#214778,#214779); +#214777 = CARTESIAN_POINT('',(134.39672777338,-100.853325989,0.)); +#214778 = DIRECTION('',(0.,0.,1.)); +#214779 = DIRECTION('',(0.857286361732,0.514839872181,-0.)); +#214780 = CYLINDRICAL_SURFACE('',#214781,0.406475878041); +#214781 = AXIS2_PLACEMENT_3D('',#214782,#214783,#214784); +#214782 = CARTESIAN_POINT('',(134.39672777338,-100.853325989,0.)); +#214783 = DIRECTION('',(0.,0.,1.)); +#214784 = DIRECTION('',(0.857286361732,0.514839872181,-0.)); +#214785 = ADVANCED_FACE('',(#214786),#214811,.F.); +#214786 = FACE_BOUND('',#214787,.F.); +#214787 = EDGE_LOOP('',(#214788,#214789,#214797,#214805)); +#214788 = ORIENTED_EDGE('',*,*,#214766,.T.); +#214789 = ORIENTED_EDGE('',*,*,#214790,.T.); +#214790 = EDGE_CURVE('',#214758,#214791,#214793,.T.); +#214791 = VERTEX_POINT('',#214792); +#214792 = CARTESIAN_POINT('',(136.394443,-98.716853,-3.5E-02)); +#214793 = LINE('',#214794,#214795); +#214794 = CARTESIAN_POINT('',(134.606271,-100.505024,-3.5E-02)); +#214795 = VECTOR('',#214796,1.); +#214796 = DIRECTION('',(0.707106978904,0.707106583469,0.)); +#214797 = ORIENTED_EDGE('',*,*,#214798,.F.); +#214798 = EDGE_CURVE('',#214799,#214791,#214801,.T.); +#214799 = VERTEX_POINT('',#214800); +#214800 = CARTESIAN_POINT('',(136.394443,-98.716853,0.)); +#214801 = LINE('',#214802,#214803); +#214802 = CARTESIAN_POINT('',(136.394443,-98.716853,0.)); +#214803 = VECTOR('',#214804,1.); +#214804 = DIRECTION('',(0.,0.,-1.)); +#214805 = ORIENTED_EDGE('',*,*,#214806,.F.); +#214806 = EDGE_CURVE('',#214767,#214799,#214807,.T.); +#214807 = LINE('',#214808,#214809); +#214808 = CARTESIAN_POINT('',(134.606271,-100.505024,0.)); +#214809 = VECTOR('',#214810,1.); +#214810 = DIRECTION('',(0.707106978904,0.707106583469,0.)); +#214811 = PLANE('',#214812); +#214812 = AXIS2_PLACEMENT_3D('',#214813,#214814,#214815); +#214813 = CARTESIAN_POINT('',(134.606271,-100.505024,0.)); +#214814 = DIRECTION('',(0.707106583469,-0.707106978904,0.)); +#214815 = DIRECTION('',(0.707106978904,0.707106583469,0.)); +#214816 = ADVANCED_FACE('',(#214817),#214842,.F.); +#214817 = FACE_BOUND('',#214818,.F.); +#214818 = EDGE_LOOP('',(#214819,#214820,#214828,#214836)); +#214819 = ORIENTED_EDGE('',*,*,#214798,.T.); +#214820 = ORIENTED_EDGE('',*,*,#214821,.T.); +#214821 = EDGE_CURVE('',#214791,#214822,#214824,.T.); +#214822 = VERTEX_POINT('',#214823); +#214823 = CARTESIAN_POINT('',(136.430491,-98.701921,-3.5E-02)); +#214824 = LINE('',#214825,#214826); +#214825 = CARTESIAN_POINT('',(136.394443,-98.716853,-3.5E-02)); +#214826 = VECTOR('',#214827,1.); +#214827 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#214828 = ORIENTED_EDGE('',*,*,#214829,.F.); +#214829 = EDGE_CURVE('',#214830,#214822,#214832,.T.); +#214830 = VERTEX_POINT('',#214831); +#214831 = CARTESIAN_POINT('',(136.430491,-98.701921,0.)); +#214832 = LINE('',#214833,#214834); +#214833 = CARTESIAN_POINT('',(136.430491,-98.701921,0.)); +#214834 = VECTOR('',#214835,1.); +#214835 = DIRECTION('',(0.,0.,-1.)); +#214836 = ORIENTED_EDGE('',*,*,#214837,.F.); +#214837 = EDGE_CURVE('',#214799,#214830,#214838,.T.); +#214838 = LINE('',#214839,#214840); +#214839 = CARTESIAN_POINT('',(136.394443,-98.716853,0.)); +#214840 = VECTOR('',#214841,1.); +#214841 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#214842 = PLANE('',#214843); +#214843 = AXIS2_PLACEMENT_3D('',#214844,#214845,#214846); +#214844 = CARTESIAN_POINT('',(136.394443,-98.716853,0.)); +#214845 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#214846 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#214847 = ADVANCED_FACE('',(#214848),#214873,.F.); +#214848 = FACE_BOUND('',#214849,.F.); +#214849 = EDGE_LOOP('',(#214850,#214851,#214859,#214867)); +#214850 = ORIENTED_EDGE('',*,*,#214829,.T.); +#214851 = ORIENTED_EDGE('',*,*,#214852,.T.); +#214852 = EDGE_CURVE('',#214822,#214853,#214855,.T.); +#214853 = VERTEX_POINT('',#214854); +#214854 = CARTESIAN_POINT('',(141.018869,-98.7,-3.5E-02)); +#214855 = LINE('',#214856,#214857); +#214856 = CARTESIAN_POINT('',(136.430491,-98.701921,-3.5E-02)); +#214857 = VECTOR('',#214858,1.); +#214858 = DIRECTION('',(0.999999912359,4.186664288857E-04,0.)); +#214859 = ORIENTED_EDGE('',*,*,#214860,.F.); +#214860 = EDGE_CURVE('',#214861,#214853,#214863,.T.); +#214861 = VERTEX_POINT('',#214862); +#214862 = CARTESIAN_POINT('',(141.018869,-98.7,0.)); +#214863 = LINE('',#214864,#214865); +#214864 = CARTESIAN_POINT('',(141.018869,-98.7,0.)); +#214865 = VECTOR('',#214866,1.); +#214866 = DIRECTION('',(0.,0.,-1.)); +#214867 = ORIENTED_EDGE('',*,*,#214868,.F.); +#214868 = EDGE_CURVE('',#214830,#214861,#214869,.T.); +#214869 = LINE('',#214870,#214871); +#214870 = CARTESIAN_POINT('',(136.430491,-98.701921,0.)); +#214871 = VECTOR('',#214872,1.); +#214872 = DIRECTION('',(0.999999912359,4.186664288857E-04,0.)); +#214873 = PLANE('',#214874); +#214874 = AXIS2_PLACEMENT_3D('',#214875,#214876,#214877); +#214875 = CARTESIAN_POINT('',(136.430491,-98.701921,0.)); +#214876 = DIRECTION('',(4.186664288857E-04,-0.999999912359,0.)); +#214877 = DIRECTION('',(0.999999912359,4.186664288857E-04,0.)); +#214878 = ADVANCED_FACE('',(#214879),#214904,.F.); +#214879 = FACE_BOUND('',#214880,.F.); +#214880 = EDGE_LOOP('',(#214881,#214882,#214890,#214898)); +#214881 = ORIENTED_EDGE('',*,*,#214860,.T.); +#214882 = ORIENTED_EDGE('',*,*,#214883,.T.); +#214883 = EDGE_CURVE('',#214853,#214884,#214886,.T.); +#214884 = VERTEX_POINT('',#214885); +#214885 = CARTESIAN_POINT('',(141.022836,-98.685195,-3.5E-02)); +#214886 = LINE('',#214887,#214888); +#214887 = CARTESIAN_POINT('',(141.018869,-98.7,-3.5E-02)); +#214888 = VECTOR('',#214889,1.); +#214889 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#214890 = ORIENTED_EDGE('',*,*,#214891,.F.); +#214891 = EDGE_CURVE('',#214892,#214884,#214894,.T.); +#214892 = VERTEX_POINT('',#214893); +#214893 = CARTESIAN_POINT('',(141.022836,-98.685195,0.)); +#214894 = LINE('',#214895,#214896); +#214895 = CARTESIAN_POINT('',(141.022836,-98.685195,0.)); +#214896 = VECTOR('',#214897,1.); +#214897 = DIRECTION('',(0.,0.,-1.)); +#214898 = ORIENTED_EDGE('',*,*,#214899,.F.); +#214899 = EDGE_CURVE('',#214861,#214892,#214900,.T.); +#214900 = LINE('',#214901,#214902); +#214901 = CARTESIAN_POINT('',(141.018869,-98.7,0.)); +#214902 = VECTOR('',#214903,1.); +#214903 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#214904 = PLANE('',#214905); +#214905 = AXIS2_PLACEMENT_3D('',#214906,#214907,#214908); +#214906 = CARTESIAN_POINT('',(141.018869,-98.7,0.)); +#214907 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#214908 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#214909 = ADVANCED_FACE('',(#214910),#214937,.T.); +#214910 = FACE_BOUND('',#214911,.F.); +#214911 = EDGE_LOOP('',(#214912,#214913,#214922,#214930)); +#214912 = ORIENTED_EDGE('',*,*,#214891,.T.); +#214913 = ORIENTED_EDGE('',*,*,#214914,.T.); +#214914 = EDGE_CURVE('',#214884,#214915,#214917,.T.); +#214915 = VERTEX_POINT('',#214916); +#214916 = CARTESIAN_POINT('',(141.022836,-98.914805,-3.5E-02)); +#214917 = CIRCLE('',#214918,0.299997422619); +#214918 = AXIS2_PLACEMENT_3D('',#214919,#214920,#214921); +#214919 = CARTESIAN_POINT('',(141.29999708232,-98.8,-3.5E-02)); +#214920 = DIRECTION('',(0.,0.,-1.)); +#214921 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#214922 = ORIENTED_EDGE('',*,*,#214923,.F.); +#214923 = EDGE_CURVE('',#214924,#214915,#214926,.T.); +#214924 = VERTEX_POINT('',#214925); +#214925 = CARTESIAN_POINT('',(141.022836,-98.914805,0.)); +#214926 = LINE('',#214927,#214928); +#214927 = CARTESIAN_POINT('',(141.022836,-98.914805,0.)); +#214928 = VECTOR('',#214929,1.); +#214929 = DIRECTION('',(0.,0.,-1.)); +#214930 = ORIENTED_EDGE('',*,*,#214931,.F.); +#214931 = EDGE_CURVE('',#214892,#214924,#214932,.T.); +#214932 = CIRCLE('',#214933,0.299997422619); +#214933 = AXIS2_PLACEMENT_3D('',#214934,#214935,#214936); +#214934 = CARTESIAN_POINT('',(141.29999708232,-98.8,0.)); +#214935 = DIRECTION('',(0.,0.,-1.)); +#214936 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#214937 = CYLINDRICAL_SURFACE('',#214938,0.299997422619); +#214938 = AXIS2_PLACEMENT_3D('',#214939,#214940,#214941); +#214939 = CARTESIAN_POINT('',(141.29999708232,-98.8,0.)); +#214940 = DIRECTION('',(-0.,-0.,1.)); +#214941 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#214942 = ADVANCED_FACE('',(#214943),#214959,.F.); +#214943 = FACE_BOUND('',#214944,.F.); +#214944 = EDGE_LOOP('',(#214945,#214946,#214952,#214953)); +#214945 = ORIENTED_EDGE('',*,*,#214923,.T.); +#214946 = ORIENTED_EDGE('',*,*,#214947,.T.); +#214947 = EDGE_CURVE('',#214915,#214688,#214948,.T.); +#214948 = LINE('',#214949,#214950); +#214949 = CARTESIAN_POINT('',(141.022836,-98.914805,-3.5E-02)); +#214950 = VECTOR('',#214951,1.); +#214951 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#214952 = ORIENTED_EDGE('',*,*,#214685,.F.); +#214953 = ORIENTED_EDGE('',*,*,#214954,.F.); +#214954 = EDGE_CURVE('',#214924,#214686,#214955,.T.); +#214955 = LINE('',#214956,#214957); +#214956 = CARTESIAN_POINT('',(141.022836,-98.914805,0.)); +#214957 = VECTOR('',#214958,1.); +#214958 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#214959 = PLANE('',#214960); +#214960 = AXIS2_PLACEMENT_3D('',#214961,#214962,#214963); +#214961 = CARTESIAN_POINT('',(141.022836,-98.914805,0.)); +#214962 = DIRECTION('',(0.965925627198,0.25881978812,0.)); +#214963 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#214964 = ADVANCED_FACE('',(#214965),#214992,.F.); +#214965 = FACE_BOUND('',#214966,.F.); +#214966 = EDGE_LOOP('',(#214967,#214977,#214984,#214985)); +#214967 = ORIENTED_EDGE('',*,*,#214968,.T.); +#214968 = EDGE_CURVE('',#214969,#214971,#214973,.T.); +#214969 = VERTEX_POINT('',#214970); +#214970 = CARTESIAN_POINT('',(141.437255,-98.8,0.)); +#214971 = VERTEX_POINT('',#214972); +#214972 = CARTESIAN_POINT('',(141.437255,-98.8,-3.5E-02)); +#214973 = LINE('',#214974,#214975); +#214974 = CARTESIAN_POINT('',(141.437255,-98.8,0.)); +#214975 = VECTOR('',#214976,1.); +#214976 = DIRECTION('',(0.,0.,-1.)); +#214977 = ORIENTED_EDGE('',*,*,#214978,.T.); +#214978 = EDGE_CURVE('',#214971,#214971,#214979,.T.); +#214979 = CIRCLE('',#214980,0.137255); +#214980 = AXIS2_PLACEMENT_3D('',#214981,#214982,#214983); +#214981 = CARTESIAN_POINT('',(141.3,-98.8,-3.5E-02)); +#214982 = DIRECTION('',(0.,0.,1.)); +#214983 = DIRECTION('',(1.,0.,-0.)); +#214984 = ORIENTED_EDGE('',*,*,#214968,.F.); +#214985 = ORIENTED_EDGE('',*,*,#214986,.F.); +#214986 = EDGE_CURVE('',#214969,#214969,#214987,.T.); +#214987 = CIRCLE('',#214988,0.137255); +#214988 = AXIS2_PLACEMENT_3D('',#214989,#214990,#214991); +#214989 = CARTESIAN_POINT('',(141.3,-98.8,0.)); +#214990 = DIRECTION('',(0.,0.,1.)); +#214991 = DIRECTION('',(1.,0.,-0.)); +#214992 = CYLINDRICAL_SURFACE('',#214993,0.137255); +#214993 = AXIS2_PLACEMENT_3D('',#214994,#214995,#214996); +#214994 = CARTESIAN_POINT('',(141.3,-98.8,0.)); +#214995 = DIRECTION('',(0.,0.,1.)); +#214996 = DIRECTION('',(1.,0.,-0.)); +#214997 = ADVANCED_FACE('',(#214998,#215009),#215012,.F.); +#214998 = FACE_BOUND('',#214999,.F.); +#214999 = EDGE_LOOP('',(#215000,#215001,#215002,#215003,#215004,#215005, + #215006,#215007,#215008)); +#215000 = ORIENTED_EDGE('',*,*,#214711,.T.); +#215001 = ORIENTED_EDGE('',*,*,#214742,.T.); +#215002 = ORIENTED_EDGE('',*,*,#214774,.T.); +#215003 = ORIENTED_EDGE('',*,*,#214806,.T.); +#215004 = ORIENTED_EDGE('',*,*,#214837,.T.); +#215005 = ORIENTED_EDGE('',*,*,#214868,.T.); +#215006 = ORIENTED_EDGE('',*,*,#214899,.T.); +#215007 = ORIENTED_EDGE('',*,*,#214931,.T.); +#215008 = ORIENTED_EDGE('',*,*,#214954,.T.); +#215009 = FACE_BOUND('',#215010,.F.); +#215010 = EDGE_LOOP('',(#215011)); +#215011 = ORIENTED_EDGE('',*,*,#214986,.T.); +#215012 = PLANE('',#215013); +#215013 = AXIS2_PLACEMENT_3D('',#215014,#215015,#215016); +#215014 = CARTESIAN_POINT('',(0.,0.,0.)); +#215015 = DIRECTION('',(-0.,-0.,-1.)); +#215016 = DIRECTION('',(-1.,0.,0.)); +#215017 = ADVANCED_FACE('',(#215018,#215029),#215032,.T.); +#215018 = FACE_BOUND('',#215019,.T.); +#215019 = EDGE_LOOP('',(#215020,#215021,#215022,#215023,#215024,#215025, + #215026,#215027,#215028)); +#215020 = ORIENTED_EDGE('',*,*,#214695,.T.); +#215021 = ORIENTED_EDGE('',*,*,#214726,.T.); +#215022 = ORIENTED_EDGE('',*,*,#214757,.T.); +#215023 = ORIENTED_EDGE('',*,*,#214790,.T.); +#215024 = ORIENTED_EDGE('',*,*,#214821,.T.); +#215025 = ORIENTED_EDGE('',*,*,#214852,.T.); +#215026 = ORIENTED_EDGE('',*,*,#214883,.T.); +#215027 = ORIENTED_EDGE('',*,*,#214914,.T.); +#215028 = ORIENTED_EDGE('',*,*,#214947,.T.); +#215029 = FACE_BOUND('',#215030,.T.); +#215030 = EDGE_LOOP('',(#215031)); +#215031 = ORIENTED_EDGE('',*,*,#214978,.T.); +#215032 = PLANE('',#215033); +#215033 = AXIS2_PLACEMENT_3D('',#215034,#215035,#215036); +#215034 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#215035 = DIRECTION('',(-0.,-0.,-1.)); +#215036 = DIRECTION('',(-1.,0.,0.)); +#215037 = MANIFOLD_SOLID_BREP('',#215038); +#215038 = CLOSED_SHELL('',(#215039,#215079,#215110,#215141,#215172, + #215203,#215234,#215265,#215298,#215329,#215360,#215391,#215422, + #215453,#215484,#215515,#215546,#215579,#215601,#215634,#215663)); +#215039 = ADVANCED_FACE('',(#215040),#215074,.T.); +#215040 = FACE_BOUND('',#215041,.T.); +#215041 = EDGE_LOOP('',(#215042,#215052,#215060,#215068)); +#215042 = ORIENTED_EDGE('',*,*,#215043,.T.); +#215043 = EDGE_CURVE('',#215044,#215046,#215048,.T.); +#215044 = VERTEX_POINT('',#215045); +#215045 = CARTESIAN_POINT('',(153.9,-124.98113,1.51)); +#215046 = VERTEX_POINT('',#215047); +#215047 = CARTESIAN_POINT('',(153.9,-124.98113,1.545)); +#215048 = LINE('',#215049,#215050); +#215049 = CARTESIAN_POINT('',(153.9,-124.98113,1.51)); +#215050 = VECTOR('',#215051,1.); +#215051 = DIRECTION('',(0.,0.,1.)); +#215052 = ORIENTED_EDGE('',*,*,#215053,.T.); +#215053 = EDGE_CURVE('',#215046,#215054,#215056,.T.); +#215054 = VERTEX_POINT('',#215055); +#215055 = CARTESIAN_POINT('',(153.9,-144.258578,1.545)); +#215056 = LINE('',#215057,#215058); +#215057 = CARTESIAN_POINT('',(153.9,-124.98113,1.545)); +#215058 = VECTOR('',#215059,1.); +#215059 = DIRECTION('',(0.,-1.,0.)); +#215060 = ORIENTED_EDGE('',*,*,#215061,.F.); +#215061 = EDGE_CURVE('',#215062,#215054,#215064,.T.); +#215062 = VERTEX_POINT('',#215063); +#215063 = CARTESIAN_POINT('',(153.9,-144.258578,1.51)); +#215064 = LINE('',#215065,#215066); +#215065 = CARTESIAN_POINT('',(153.9,-144.258578,1.51)); +#215066 = VECTOR('',#215067,1.); +#215067 = DIRECTION('',(0.,0.,1.)); +#215068 = ORIENTED_EDGE('',*,*,#215069,.F.); +#215069 = EDGE_CURVE('',#215044,#215062,#215070,.T.); +#215070 = LINE('',#215071,#215072); +#215071 = CARTESIAN_POINT('',(153.9,-124.98113,1.51)); +#215072 = VECTOR('',#215073,1.); +#215073 = DIRECTION('',(0.,-1.,0.)); +#215074 = PLANE('',#215075); +#215075 = AXIS2_PLACEMENT_3D('',#215076,#215077,#215078); +#215076 = CARTESIAN_POINT('',(153.9,-124.98113,1.51)); +#215077 = DIRECTION('',(1.,0.,-0.)); +#215078 = DIRECTION('',(0.,-1.,0.)); +#215079 = ADVANCED_FACE('',(#215080),#215105,.T.); +#215080 = FACE_BOUND('',#215081,.T.); +#215081 = EDGE_LOOP('',(#215082,#215083,#215091,#215099)); +#215082 = ORIENTED_EDGE('',*,*,#215061,.T.); +#215083 = ORIENTED_EDGE('',*,*,#215084,.T.); +#215084 = EDGE_CURVE('',#215054,#215085,#215087,.T.); +#215085 = VERTEX_POINT('',#215086); +#215086 = CARTESIAN_POINT('',(153.933147,-144.294443,1.545)); +#215087 = LINE('',#215088,#215089); +#215088 = CARTESIAN_POINT('',(153.9,-144.258578,1.545)); +#215089 = VECTOR('',#215090,1.); +#215090 = DIRECTION('',(0.678731567799,-0.734386450633,0.)); +#215091 = ORIENTED_EDGE('',*,*,#215092,.F.); +#215092 = EDGE_CURVE('',#215093,#215085,#215095,.T.); +#215093 = VERTEX_POINT('',#215094); +#215094 = CARTESIAN_POINT('',(153.933147,-144.294443,1.51)); +#215095 = LINE('',#215096,#215097); +#215096 = CARTESIAN_POINT('',(153.933147,-144.294443,1.51)); +#215097 = VECTOR('',#215098,1.); +#215098 = DIRECTION('',(0.,0.,1.)); +#215099 = ORIENTED_EDGE('',*,*,#215100,.F.); +#215100 = EDGE_CURVE('',#215062,#215093,#215101,.T.); +#215101 = LINE('',#215102,#215103); +#215102 = CARTESIAN_POINT('',(153.9,-144.258578,1.51)); +#215103 = VECTOR('',#215104,1.); +#215104 = DIRECTION('',(0.678731567799,-0.734386450633,0.)); +#215105 = PLANE('',#215106); +#215106 = AXIS2_PLACEMENT_3D('',#215107,#215108,#215109); +#215107 = CARTESIAN_POINT('',(153.9,-144.258578,1.51)); +#215108 = DIRECTION('',(0.734386450633,0.678731567799,-0.)); +#215109 = DIRECTION('',(0.678731567799,-0.734386450633,0.)); +#215110 = ADVANCED_FACE('',(#215111),#215136,.T.); +#215111 = FACE_BOUND('',#215112,.T.); +#215112 = EDGE_LOOP('',(#215113,#215114,#215122,#215130)); +#215113 = ORIENTED_EDGE('',*,*,#215092,.T.); +#215114 = ORIENTED_EDGE('',*,*,#215115,.T.); +#215115 = EDGE_CURVE('',#215085,#215116,#215118,.T.); +#215116 = VERTEX_POINT('',#215117); +#215117 = CARTESIAN_POINT('',(153.948079,-144.330491,1.545)); +#215118 = LINE('',#215119,#215120); +#215119 = CARTESIAN_POINT('',(153.933147,-144.294443,1.545)); +#215120 = VECTOR('',#215121,1.); +#215121 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#215122 = ORIENTED_EDGE('',*,*,#215123,.F.); +#215123 = EDGE_CURVE('',#215124,#215116,#215126,.T.); +#215124 = VERTEX_POINT('',#215125); +#215125 = CARTESIAN_POINT('',(153.948079,-144.330491,1.51)); +#215126 = LINE('',#215127,#215128); +#215127 = CARTESIAN_POINT('',(153.948079,-144.330491,1.51)); +#215128 = VECTOR('',#215129,1.); +#215129 = DIRECTION('',(0.,0.,1.)); +#215130 = ORIENTED_EDGE('',*,*,#215131,.F.); +#215131 = EDGE_CURVE('',#215093,#215124,#215132,.T.); +#215132 = LINE('',#215133,#215134); +#215133 = CARTESIAN_POINT('',(153.933147,-144.294443,1.51)); +#215134 = VECTOR('',#215135,1.); +#215135 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#215136 = PLANE('',#215137); +#215137 = AXIS2_PLACEMENT_3D('',#215138,#215139,#215140); +#215138 = CARTESIAN_POINT('',(153.933147,-144.294443,1.51)); +#215139 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#215140 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#215141 = ADVANCED_FACE('',(#215142),#215167,.T.); +#215142 = FACE_BOUND('',#215143,.T.); +#215143 = EDGE_LOOP('',(#215144,#215145,#215153,#215161)); +#215144 = ORIENTED_EDGE('',*,*,#215123,.T.); +#215145 = ORIENTED_EDGE('',*,*,#215146,.T.); +#215146 = EDGE_CURVE('',#215116,#215147,#215149,.T.); +#215147 = VERTEX_POINT('',#215148); +#215148 = CARTESIAN_POINT('',(153.948079,-145.044509,1.545)); +#215149 = LINE('',#215150,#215151); +#215150 = CARTESIAN_POINT('',(153.948079,-144.330491,1.545)); +#215151 = VECTOR('',#215152,1.); +#215152 = DIRECTION('',(0.,-1.,0.)); +#215153 = ORIENTED_EDGE('',*,*,#215154,.F.); +#215154 = EDGE_CURVE('',#215155,#215147,#215157,.T.); +#215155 = VERTEX_POINT('',#215156); +#215156 = CARTESIAN_POINT('',(153.948079,-145.044509,1.51)); +#215157 = LINE('',#215158,#215159); +#215158 = CARTESIAN_POINT('',(153.948079,-145.044509,1.51)); +#215159 = VECTOR('',#215160,1.); +#215160 = DIRECTION('',(0.,0.,1.)); +#215161 = ORIENTED_EDGE('',*,*,#215162,.F.); +#215162 = EDGE_CURVE('',#215124,#215155,#215163,.T.); +#215163 = LINE('',#215164,#215165); +#215164 = CARTESIAN_POINT('',(153.948079,-144.330491,1.51)); +#215165 = VECTOR('',#215166,1.); +#215166 = DIRECTION('',(0.,-1.,0.)); +#215167 = PLANE('',#215168); +#215168 = AXIS2_PLACEMENT_3D('',#215169,#215170,#215171); +#215169 = CARTESIAN_POINT('',(153.948079,-144.330491,1.51)); +#215170 = DIRECTION('',(1.,0.,-0.)); +#215171 = DIRECTION('',(0.,-1.,0.)); +#215172 = ADVANCED_FACE('',(#215173),#215198,.T.); +#215173 = FACE_BOUND('',#215174,.T.); +#215174 = EDGE_LOOP('',(#215175,#215176,#215184,#215192)); +#215175 = ORIENTED_EDGE('',*,*,#215154,.T.); +#215176 = ORIENTED_EDGE('',*,*,#215177,.T.); +#215177 = EDGE_CURVE('',#215147,#215178,#215180,.T.); +#215178 = VERTEX_POINT('',#215179); +#215179 = CARTESIAN_POINT('',(153.933147,-145.080557,1.545)); +#215180 = LINE('',#215181,#215182); +#215181 = CARTESIAN_POINT('',(153.948079,-145.044509,1.545)); +#215182 = VECTOR('',#215183,1.); +#215183 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#215184 = ORIENTED_EDGE('',*,*,#215185,.F.); +#215185 = EDGE_CURVE('',#215186,#215178,#215188,.T.); +#215186 = VERTEX_POINT('',#215187); +#215187 = CARTESIAN_POINT('',(153.933147,-145.080557,1.51)); +#215188 = LINE('',#215189,#215190); +#215189 = CARTESIAN_POINT('',(153.933147,-145.080557,1.51)); +#215190 = VECTOR('',#215191,1.); +#215191 = DIRECTION('',(0.,0.,1.)); +#215192 = ORIENTED_EDGE('',*,*,#215193,.F.); +#215193 = EDGE_CURVE('',#215155,#215186,#215194,.T.); +#215194 = LINE('',#215195,#215196); +#215195 = CARTESIAN_POINT('',(153.948079,-145.044509,1.51)); +#215196 = VECTOR('',#215197,1.); +#215197 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#215198 = PLANE('',#215199); +#215199 = AXIS2_PLACEMENT_3D('',#215200,#215201,#215202); +#215200 = CARTESIAN_POINT('',(153.948079,-145.044509,1.51)); +#215201 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#215202 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#215203 = ADVANCED_FACE('',(#215204),#215229,.T.); +#215204 = FACE_BOUND('',#215205,.T.); +#215205 = EDGE_LOOP('',(#215206,#215207,#215215,#215223)); +#215206 = ORIENTED_EDGE('',*,*,#215185,.T.); +#215207 = ORIENTED_EDGE('',*,*,#215208,.T.); +#215208 = EDGE_CURVE('',#215178,#215209,#215211,.T.); +#215209 = VERTEX_POINT('',#215210); +#215210 = CARTESIAN_POINT('',(153.45,-145.566422,1.545)); +#215211 = LINE('',#215212,#215213); +#215212 = CARTESIAN_POINT('',(153.933147,-145.080557,1.545)); +#215213 = VECTOR('',#215214,1.); +#215214 = DIRECTION('',(-0.705120630278,-0.709087368916,0.)); +#215215 = ORIENTED_EDGE('',*,*,#215216,.F.); +#215216 = EDGE_CURVE('',#215217,#215209,#215219,.T.); +#215217 = VERTEX_POINT('',#215218); +#215218 = CARTESIAN_POINT('',(153.45,-145.566422,1.51)); +#215219 = LINE('',#215220,#215221); +#215220 = CARTESIAN_POINT('',(153.45,-145.566422,1.51)); +#215221 = VECTOR('',#215222,1.); +#215222 = DIRECTION('',(0.,0.,1.)); +#215223 = ORIENTED_EDGE('',*,*,#215224,.F.); +#215224 = EDGE_CURVE('',#215186,#215217,#215225,.T.); +#215225 = LINE('',#215226,#215227); +#215226 = CARTESIAN_POINT('',(153.933147,-145.080557,1.51)); +#215227 = VECTOR('',#215228,1.); +#215228 = DIRECTION('',(-0.705120630278,-0.709087368916,0.)); +#215229 = PLANE('',#215230); +#215230 = AXIS2_PLACEMENT_3D('',#215231,#215232,#215233); +#215231 = CARTESIAN_POINT('',(153.933147,-145.080557,1.51)); +#215232 = DIRECTION('',(0.709087368916,-0.705120630278,0.)); +#215233 = DIRECTION('',(-0.705120630278,-0.709087368916,0.)); +#215234 = ADVANCED_FACE('',(#215235),#215260,.T.); +#215235 = FACE_BOUND('',#215236,.T.); +#215236 = EDGE_LOOP('',(#215237,#215238,#215246,#215254)); +#215237 = ORIENTED_EDGE('',*,*,#215216,.T.); +#215238 = ORIENTED_EDGE('',*,*,#215239,.T.); +#215239 = EDGE_CURVE('',#215209,#215240,#215242,.T.); +#215240 = VERTEX_POINT('',#215241); +#215241 = CARTESIAN_POINT('',(153.448079,-150.694509,1.545)); +#215242 = LINE('',#215243,#215244); +#215243 = CARTESIAN_POINT('',(153.45,-145.566422,1.545)); +#215244 = VECTOR('',#215245,1.); +#215245 = DIRECTION('',(-3.746036027073E-04,-0.999999929836,0.)); +#215246 = ORIENTED_EDGE('',*,*,#215247,.F.); +#215247 = EDGE_CURVE('',#215248,#215240,#215250,.T.); +#215248 = VERTEX_POINT('',#215249); +#215249 = CARTESIAN_POINT('',(153.448079,-150.694509,1.51)); +#215250 = LINE('',#215251,#215252); +#215251 = CARTESIAN_POINT('',(153.448079,-150.694509,1.51)); +#215252 = VECTOR('',#215253,1.); +#215253 = DIRECTION('',(0.,0.,1.)); +#215254 = ORIENTED_EDGE('',*,*,#215255,.F.); +#215255 = EDGE_CURVE('',#215217,#215248,#215256,.T.); +#215256 = LINE('',#215257,#215258); +#215257 = CARTESIAN_POINT('',(153.45,-145.566422,1.51)); +#215258 = VECTOR('',#215259,1.); +#215259 = DIRECTION('',(-3.746036027073E-04,-0.999999929836,0.)); +#215260 = PLANE('',#215261); +#215261 = AXIS2_PLACEMENT_3D('',#215262,#215263,#215264); +#215262 = CARTESIAN_POINT('',(153.45,-145.566422,1.51)); +#215263 = DIRECTION('',(0.999999929836,-3.746036027073E-04,0.)); +#215264 = DIRECTION('',(-3.746036027073E-04,-0.999999929836,0.)); +#215265 = ADVANCED_FACE('',(#215266),#215293,.T.); +#215266 = FACE_BOUND('',#215267,.T.); +#215267 = EDGE_LOOP('',(#215268,#215269,#215278,#215286)); +#215268 = ORIENTED_EDGE('',*,*,#215247,.T.); +#215269 = ORIENTED_EDGE('',*,*,#215270,.T.); +#215270 = EDGE_CURVE('',#215240,#215271,#215273,.T.); +#215271 = VERTEX_POINT('',#215272); +#215272 = CARTESIAN_POINT('',(153.251921,-150.694509,1.545)); +#215273 = CIRCLE('',#215274,0.100000456609); +#215274 = AXIS2_PLACEMENT_3D('',#215275,#215276,#215277); +#215275 = CARTESIAN_POINT('',(153.35,-150.675,1.545)); +#215276 = DIRECTION('',(-0.,0.,-1.)); +#215277 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#215278 = ORIENTED_EDGE('',*,*,#215279,.F.); +#215279 = EDGE_CURVE('',#215280,#215271,#215282,.T.); +#215280 = VERTEX_POINT('',#215281); +#215281 = CARTESIAN_POINT('',(153.251921,-150.694509,1.51)); +#215282 = LINE('',#215283,#215284); +#215283 = CARTESIAN_POINT('',(153.251921,-150.694509,1.51)); +#215284 = VECTOR('',#215285,1.); +#215285 = DIRECTION('',(0.,0.,1.)); +#215286 = ORIENTED_EDGE('',*,*,#215287,.F.); +#215287 = EDGE_CURVE('',#215248,#215280,#215288,.T.); +#215288 = CIRCLE('',#215289,0.100000456609); +#215289 = AXIS2_PLACEMENT_3D('',#215290,#215291,#215292); +#215290 = CARTESIAN_POINT('',(153.35,-150.675,1.51)); +#215291 = DIRECTION('',(-0.,0.,-1.)); +#215292 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#215293 = CYLINDRICAL_SURFACE('',#215294,0.100000456609); +#215294 = AXIS2_PLACEMENT_3D('',#215295,#215296,#215297); +#215295 = CARTESIAN_POINT('',(153.35,-150.675,1.51)); +#215296 = DIRECTION('',(-0.,0.,-1.)); +#215297 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#215298 = ADVANCED_FACE('',(#215299),#215324,.T.); +#215299 = FACE_BOUND('',#215300,.T.); +#215300 = EDGE_LOOP('',(#215301,#215302,#215310,#215318)); +#215301 = ORIENTED_EDGE('',*,*,#215279,.T.); +#215302 = ORIENTED_EDGE('',*,*,#215303,.T.); +#215303 = EDGE_CURVE('',#215271,#215304,#215306,.T.); +#215304 = VERTEX_POINT('',#215305); +#215305 = CARTESIAN_POINT('',(153.251921,-145.505491,1.545)); +#215306 = LINE('',#215307,#215308); +#215307 = CARTESIAN_POINT('',(153.251921,-150.694509,1.545)); +#215308 = VECTOR('',#215309,1.); +#215309 = DIRECTION('',(0.,1.,0.)); +#215310 = ORIENTED_EDGE('',*,*,#215311,.F.); +#215311 = EDGE_CURVE('',#215312,#215304,#215314,.T.); +#215312 = VERTEX_POINT('',#215313); +#215313 = CARTESIAN_POINT('',(153.251921,-145.505491,1.51)); +#215314 = LINE('',#215315,#215316); +#215315 = CARTESIAN_POINT('',(153.251921,-145.505491,1.51)); +#215316 = VECTOR('',#215317,1.); +#215317 = DIRECTION('',(0.,0.,1.)); +#215318 = ORIENTED_EDGE('',*,*,#215319,.F.); +#215319 = EDGE_CURVE('',#215280,#215312,#215320,.T.); +#215320 = LINE('',#215321,#215322); +#215321 = CARTESIAN_POINT('',(153.251921,-150.694509,1.51)); +#215322 = VECTOR('',#215323,1.); +#215323 = DIRECTION('',(0.,1.,0.)); +#215324 = PLANE('',#215325); +#215325 = AXIS2_PLACEMENT_3D('',#215326,#215327,#215328); +#215326 = CARTESIAN_POINT('',(153.251921,-150.694509,1.51)); +#215327 = DIRECTION('',(-1.,0.,0.)); +#215328 = DIRECTION('',(0.,1.,0.)); +#215329 = ADVANCED_FACE('',(#215330),#215355,.T.); +#215330 = FACE_BOUND('',#215331,.T.); +#215331 = EDGE_LOOP('',(#215332,#215333,#215341,#215349)); +#215332 = ORIENTED_EDGE('',*,*,#215311,.T.); +#215333 = ORIENTED_EDGE('',*,*,#215334,.T.); +#215334 = EDGE_CURVE('',#215304,#215335,#215337,.T.); +#215335 = VERTEX_POINT('',#215336); +#215336 = CARTESIAN_POINT('',(153.266853,-145.469443,1.545)); +#215337 = LINE('',#215338,#215339); +#215338 = CARTESIAN_POINT('',(153.251921,-145.505491,1.545)); +#215339 = VECTOR('',#215340,1.); +#215340 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#215341 = ORIENTED_EDGE('',*,*,#215342,.F.); +#215342 = EDGE_CURVE('',#215343,#215335,#215345,.T.); +#215343 = VERTEX_POINT('',#215344); +#215344 = CARTESIAN_POINT('',(153.266853,-145.469443,1.51)); +#215345 = LINE('',#215346,#215347); +#215346 = CARTESIAN_POINT('',(153.266853,-145.469443,1.51)); +#215347 = VECTOR('',#215348,1.); +#215348 = DIRECTION('',(0.,0.,1.)); +#215349 = ORIENTED_EDGE('',*,*,#215350,.F.); +#215350 = EDGE_CURVE('',#215312,#215343,#215351,.T.); +#215351 = LINE('',#215352,#215353); +#215352 = CARTESIAN_POINT('',(153.251921,-145.505491,1.51)); +#215353 = VECTOR('',#215354,1.); +#215354 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#215355 = PLANE('',#215356); +#215356 = AXIS2_PLACEMENT_3D('',#215357,#215358,#215359); +#215357 = CARTESIAN_POINT('',(153.251921,-145.505491,1.51)); +#215358 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#215359 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#215360 = ADVANCED_FACE('',(#215361),#215386,.T.); +#215361 = FACE_BOUND('',#215362,.T.); +#215362 = EDGE_LOOP('',(#215363,#215364,#215372,#215380)); +#215363 = ORIENTED_EDGE('',*,*,#215342,.T.); +#215364 = ORIENTED_EDGE('',*,*,#215365,.T.); +#215365 = EDGE_CURVE('',#215335,#215366,#215368,.T.); +#215366 = VERTEX_POINT('',#215367); +#215367 = CARTESIAN_POINT('',(153.75,-144.983578,1.545)); +#215368 = LINE('',#215369,#215370); +#215369 = CARTESIAN_POINT('',(153.266853,-145.469443,1.545)); +#215370 = VECTOR('',#215371,1.); +#215371 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#215372 = ORIENTED_EDGE('',*,*,#215373,.F.); +#215373 = EDGE_CURVE('',#215374,#215366,#215376,.T.); +#215374 = VERTEX_POINT('',#215375); +#215375 = CARTESIAN_POINT('',(153.75,-144.983578,1.51)); +#215376 = LINE('',#215377,#215378); +#215377 = CARTESIAN_POINT('',(153.75,-144.983578,1.51)); +#215378 = VECTOR('',#215379,1.); +#215379 = DIRECTION('',(0.,0.,1.)); +#215380 = ORIENTED_EDGE('',*,*,#215381,.F.); +#215381 = EDGE_CURVE('',#215343,#215374,#215382,.T.); +#215382 = LINE('',#215383,#215384); +#215383 = CARTESIAN_POINT('',(153.266853,-145.469443,1.51)); +#215384 = VECTOR('',#215385,1.); +#215385 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#215386 = PLANE('',#215387); +#215387 = AXIS2_PLACEMENT_3D('',#215388,#215389,#215390); +#215388 = CARTESIAN_POINT('',(153.266853,-145.469443,1.51)); +#215389 = DIRECTION('',(-0.709087368916,0.705120630278,0.)); +#215390 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#215391 = ADVANCED_FACE('',(#215392),#215417,.T.); +#215392 = FACE_BOUND('',#215393,.T.); +#215393 = EDGE_LOOP('',(#215394,#215395,#215403,#215411)); +#215394 = ORIENTED_EDGE('',*,*,#215373,.T.); +#215395 = ORIENTED_EDGE('',*,*,#215396,.T.); +#215396 = EDGE_CURVE('',#215366,#215397,#215399,.T.); +#215397 = VERTEX_POINT('',#215398); +#215398 = CARTESIAN_POINT('',(153.75,-144.391421,1.545)); +#215399 = LINE('',#215400,#215401); +#215400 = CARTESIAN_POINT('',(153.75,-144.983578,1.545)); +#215401 = VECTOR('',#215402,1.); +#215402 = DIRECTION('',(0.,1.,0.)); +#215403 = ORIENTED_EDGE('',*,*,#215404,.F.); +#215404 = EDGE_CURVE('',#215405,#215397,#215407,.T.); +#215405 = VERTEX_POINT('',#215406); +#215406 = CARTESIAN_POINT('',(153.75,-144.391421,1.51)); +#215407 = LINE('',#215408,#215409); +#215408 = CARTESIAN_POINT('',(153.75,-144.391421,1.51)); +#215409 = VECTOR('',#215410,1.); +#215410 = DIRECTION('',(0.,0.,1.)); +#215411 = ORIENTED_EDGE('',*,*,#215412,.F.); +#215412 = EDGE_CURVE('',#215374,#215405,#215413,.T.); +#215413 = LINE('',#215414,#215415); +#215414 = CARTESIAN_POINT('',(153.75,-144.983578,1.51)); +#215415 = VECTOR('',#215416,1.); +#215416 = DIRECTION('',(0.,1.,0.)); +#215417 = PLANE('',#215418); +#215418 = AXIS2_PLACEMENT_3D('',#215419,#215420,#215421); +#215419 = CARTESIAN_POINT('',(153.75,-144.983578,1.51)); +#215420 = DIRECTION('',(-1.,0.,0.)); +#215421 = DIRECTION('',(0.,1.,0.)); +#215422 = ADVANCED_FACE('',(#215423),#215448,.T.); +#215423 = FACE_BOUND('',#215424,.T.); +#215424 = EDGE_LOOP('',(#215425,#215426,#215434,#215442)); +#215425 = ORIENTED_EDGE('',*,*,#215404,.T.); +#215426 = ORIENTED_EDGE('',*,*,#215427,.T.); +#215427 = EDGE_CURVE('',#215397,#215428,#215430,.T.); +#215428 = VERTEX_POINT('',#215429); +#215429 = CARTESIAN_POINT('',(153.716853,-144.355557,1.545)); +#215430 = LINE('',#215431,#215432); +#215431 = CARTESIAN_POINT('',(153.75,-144.391421,1.545)); +#215432 = VECTOR('',#215433,1.); +#215433 = DIRECTION('',(-0.67874177438,0.734377017418,0.)); +#215434 = ORIENTED_EDGE('',*,*,#215435,.F.); +#215435 = EDGE_CURVE('',#215436,#215428,#215438,.T.); +#215436 = VERTEX_POINT('',#215437); +#215437 = CARTESIAN_POINT('',(153.716853,-144.355557,1.51)); +#215438 = LINE('',#215439,#215440); +#215439 = CARTESIAN_POINT('',(153.716853,-144.355557,1.51)); +#215440 = VECTOR('',#215441,1.); +#215441 = DIRECTION('',(0.,0.,1.)); +#215442 = ORIENTED_EDGE('',*,*,#215443,.F.); +#215443 = EDGE_CURVE('',#215405,#215436,#215444,.T.); +#215444 = LINE('',#215445,#215446); +#215445 = CARTESIAN_POINT('',(153.75,-144.391421,1.51)); +#215446 = VECTOR('',#215447,1.); +#215447 = DIRECTION('',(-0.67874177438,0.734377017418,0.)); +#215448 = PLANE('',#215449); +#215449 = AXIS2_PLACEMENT_3D('',#215450,#215451,#215452); +#215450 = CARTESIAN_POINT('',(153.75,-144.391421,1.51)); +#215451 = DIRECTION('',(-0.734377017418,-0.67874177438,0.)); +#215452 = DIRECTION('',(-0.67874177438,0.734377017418,0.)); +#215453 = ADVANCED_FACE('',(#215454),#215479,.T.); +#215454 = FACE_BOUND('',#215455,.T.); +#215455 = EDGE_LOOP('',(#215456,#215457,#215465,#215473)); +#215456 = ORIENTED_EDGE('',*,*,#215435,.T.); +#215457 = ORIENTED_EDGE('',*,*,#215458,.T.); +#215458 = EDGE_CURVE('',#215428,#215459,#215461,.T.); +#215459 = VERTEX_POINT('',#215460); +#215460 = CARTESIAN_POINT('',(153.701921,-144.319509,1.545)); +#215461 = LINE('',#215462,#215463); +#215462 = CARTESIAN_POINT('',(153.716853,-144.355557,1.545)); +#215463 = VECTOR('',#215464,1.); +#215464 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#215465 = ORIENTED_EDGE('',*,*,#215466,.F.); +#215466 = EDGE_CURVE('',#215467,#215459,#215469,.T.); +#215467 = VERTEX_POINT('',#215468); +#215468 = CARTESIAN_POINT('',(153.701921,-144.319509,1.51)); +#215469 = LINE('',#215470,#215471); +#215470 = CARTESIAN_POINT('',(153.701921,-144.319509,1.51)); +#215471 = VECTOR('',#215472,1.); +#215472 = DIRECTION('',(0.,0.,1.)); +#215473 = ORIENTED_EDGE('',*,*,#215474,.F.); +#215474 = EDGE_CURVE('',#215436,#215467,#215475,.T.); +#215475 = LINE('',#215476,#215477); +#215476 = CARTESIAN_POINT('',(153.716853,-144.355557,1.51)); +#215477 = VECTOR('',#215478,1.); +#215478 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#215479 = PLANE('',#215480); +#215480 = AXIS2_PLACEMENT_3D('',#215481,#215482,#215483); +#215481 = CARTESIAN_POINT('',(153.716853,-144.355557,1.51)); +#215482 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#215483 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#215484 = ADVANCED_FACE('',(#215485),#215510,.T.); +#215485 = FACE_BOUND('',#215486,.T.); +#215486 = EDGE_LOOP('',(#215487,#215488,#215496,#215504)); +#215487 = ORIENTED_EDGE('',*,*,#215466,.T.); +#215488 = ORIENTED_EDGE('',*,*,#215489,.T.); +#215489 = EDGE_CURVE('',#215459,#215490,#215492,.T.); +#215490 = VERTEX_POINT('',#215491); +#215491 = CARTESIAN_POINT('',(153.7,-124.98113,1.545)); +#215492 = LINE('',#215493,#215494); +#215493 = CARTESIAN_POINT('',(153.701921,-144.319509,1.545)); +#215494 = VECTOR('',#215495,1.); +#215495 = DIRECTION('',(-9.933614345505E-05,0.999999995066,0.)); +#215496 = ORIENTED_EDGE('',*,*,#215497,.F.); +#215497 = EDGE_CURVE('',#215498,#215490,#215500,.T.); +#215498 = VERTEX_POINT('',#215499); +#215499 = CARTESIAN_POINT('',(153.7,-124.98113,1.51)); +#215500 = LINE('',#215501,#215502); +#215501 = CARTESIAN_POINT('',(153.7,-124.98113,1.51)); +#215502 = VECTOR('',#215503,1.); +#215503 = DIRECTION('',(0.,0.,1.)); +#215504 = ORIENTED_EDGE('',*,*,#215505,.F.); +#215505 = EDGE_CURVE('',#215467,#215498,#215506,.T.); +#215506 = LINE('',#215507,#215508); +#215507 = CARTESIAN_POINT('',(153.701921,-144.319509,1.51)); +#215508 = VECTOR('',#215509,1.); +#215509 = DIRECTION('',(-9.933614345505E-05,0.999999995066,0.)); +#215510 = PLANE('',#215511); +#215511 = AXIS2_PLACEMENT_3D('',#215512,#215513,#215514); +#215512 = CARTESIAN_POINT('',(153.701921,-144.319509,1.51)); +#215513 = DIRECTION('',(-0.999999995066,-9.933614345505E-05,0.)); +#215514 = DIRECTION('',(-9.933614345505E-05,0.999999995066,0.)); +#215515 = ADVANCED_FACE('',(#215516),#215541,.T.); +#215516 = FACE_BOUND('',#215517,.T.); +#215517 = EDGE_LOOP('',(#215518,#215519,#215527,#215535)); +#215518 = ORIENTED_EDGE('',*,*,#215497,.T.); +#215519 = ORIENTED_EDGE('',*,*,#215520,.T.); +#215520 = EDGE_CURVE('',#215490,#215521,#215523,.T.); +#215521 = VERTEX_POINT('',#215522); +#215522 = CARTESIAN_POINT('',(153.685195,-124.977164,1.545)); +#215523 = LINE('',#215524,#215525); +#215524 = CARTESIAN_POINT('',(153.7,-124.98113,1.545)); +#215525 = VECTOR('',#215526,1.); +#215526 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#215527 = ORIENTED_EDGE('',*,*,#215528,.F.); +#215528 = EDGE_CURVE('',#215529,#215521,#215531,.T.); +#215529 = VERTEX_POINT('',#215530); +#215530 = CARTESIAN_POINT('',(153.685195,-124.977164,1.51)); +#215531 = LINE('',#215532,#215533); +#215532 = CARTESIAN_POINT('',(153.685195,-124.977164,1.51)); +#215533 = VECTOR('',#215534,1.); +#215534 = DIRECTION('',(0.,0.,1.)); +#215535 = ORIENTED_EDGE('',*,*,#215536,.F.); +#215536 = EDGE_CURVE('',#215498,#215529,#215537,.T.); +#215537 = LINE('',#215538,#215539); +#215538 = CARTESIAN_POINT('',(153.7,-124.98113,1.51)); +#215539 = VECTOR('',#215540,1.); +#215540 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#215541 = PLANE('',#215542); +#215542 = AXIS2_PLACEMENT_3D('',#215543,#215544,#215545); +#215543 = CARTESIAN_POINT('',(153.7,-124.98113,1.51)); +#215544 = DIRECTION('',(-0.258758913864,-0.9659419364,0.)); +#215545 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#215546 = ADVANCED_FACE('',(#215547),#215574,.T.); +#215547 = FACE_BOUND('',#215548,.T.); +#215548 = EDGE_LOOP('',(#215549,#215550,#215559,#215567)); +#215549 = ORIENTED_EDGE('',*,*,#215528,.T.); +#215550 = ORIENTED_EDGE('',*,*,#215551,.T.); +#215551 = EDGE_CURVE('',#215521,#215552,#215554,.T.); +#215552 = VERTEX_POINT('',#215553); +#215553 = CARTESIAN_POINT('',(153.914805,-124.977164,1.545)); +#215554 = CIRCLE('',#215555,0.299999472923); +#215555 = AXIS2_PLACEMENT_3D('',#215556,#215557,#215558); +#215556 = CARTESIAN_POINT('',(153.8,-124.7000006984,1.545)); +#215557 = DIRECTION('',(0.,0.,-1.)); +#215558 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#215559 = ORIENTED_EDGE('',*,*,#215560,.F.); +#215560 = EDGE_CURVE('',#215561,#215552,#215563,.T.); +#215561 = VERTEX_POINT('',#215562); +#215562 = CARTESIAN_POINT('',(153.914805,-124.977164,1.51)); +#215563 = LINE('',#215564,#215565); +#215564 = CARTESIAN_POINT('',(153.914805,-124.977164,1.51)); +#215565 = VECTOR('',#215566,1.); +#215566 = DIRECTION('',(0.,0.,1.)); +#215567 = ORIENTED_EDGE('',*,*,#215568,.F.); +#215568 = EDGE_CURVE('',#215529,#215561,#215569,.T.); +#215569 = CIRCLE('',#215570,0.299999472923); +#215570 = AXIS2_PLACEMENT_3D('',#215571,#215572,#215573); +#215571 = CARTESIAN_POINT('',(153.8,-124.7000006984,1.51)); +#215572 = DIRECTION('',(0.,0.,-1.)); +#215573 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#215574 = CYLINDRICAL_SURFACE('',#215575,0.299999472923); +#215575 = AXIS2_PLACEMENT_3D('',#215576,#215577,#215578); +#215576 = CARTESIAN_POINT('',(153.8,-124.7000006984,1.51)); +#215577 = DIRECTION('',(0.,0.,-1.)); +#215578 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#215579 = ADVANCED_FACE('',(#215580),#215596,.T.); +#215580 = FACE_BOUND('',#215581,.T.); +#215581 = EDGE_LOOP('',(#215582,#215583,#215589,#215590)); +#215582 = ORIENTED_EDGE('',*,*,#215560,.T.); +#215583 = ORIENTED_EDGE('',*,*,#215584,.T.); +#215584 = EDGE_CURVE('',#215552,#215046,#215585,.T.); +#215585 = LINE('',#215586,#215587); +#215586 = CARTESIAN_POINT('',(153.914805,-124.977164,1.545)); +#215587 = VECTOR('',#215588,1.); +#215588 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#215589 = ORIENTED_EDGE('',*,*,#215043,.F.); +#215590 = ORIENTED_EDGE('',*,*,#215591,.F.); +#215591 = EDGE_CURVE('',#215561,#215044,#215592,.T.); +#215592 = LINE('',#215593,#215594); +#215593 = CARTESIAN_POINT('',(153.914805,-124.977164,1.51)); +#215594 = VECTOR('',#215595,1.); +#215595 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#215596 = PLANE('',#215597); +#215597 = AXIS2_PLACEMENT_3D('',#215598,#215599,#215600); +#215598 = CARTESIAN_POINT('',(153.914805,-124.977164,1.51)); +#215599 = DIRECTION('',(0.258758913864,-0.9659419364,0.)); +#215600 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#215601 = ADVANCED_FACE('',(#215602),#215629,.F.); +#215602 = FACE_BOUND('',#215603,.T.); +#215603 = EDGE_LOOP('',(#215604,#215614,#215621,#215622)); +#215604 = ORIENTED_EDGE('',*,*,#215605,.T.); +#215605 = EDGE_CURVE('',#215606,#215608,#215610,.T.); +#215606 = VERTEX_POINT('',#215607); +#215607 = CARTESIAN_POINT('',(153.937255,-124.7,1.51)); +#215608 = VERTEX_POINT('',#215609); +#215609 = CARTESIAN_POINT('',(153.937255,-124.7,1.545)); +#215610 = LINE('',#215611,#215612); +#215611 = CARTESIAN_POINT('',(153.937255,-124.7,1.51)); +#215612 = VECTOR('',#215613,1.); +#215613 = DIRECTION('',(0.,0.,1.)); +#215614 = ORIENTED_EDGE('',*,*,#215615,.T.); +#215615 = EDGE_CURVE('',#215608,#215608,#215616,.T.); +#215616 = CIRCLE('',#215617,0.137255); +#215617 = AXIS2_PLACEMENT_3D('',#215618,#215619,#215620); +#215618 = CARTESIAN_POINT('',(153.8,-124.7,1.545)); +#215619 = DIRECTION('',(0.,0.,1.)); +#215620 = DIRECTION('',(1.,0.,-0.)); +#215621 = ORIENTED_EDGE('',*,*,#215605,.F.); +#215622 = ORIENTED_EDGE('',*,*,#215623,.F.); +#215623 = EDGE_CURVE('',#215606,#215606,#215624,.T.); +#215624 = CIRCLE('',#215625,0.137255); +#215625 = AXIS2_PLACEMENT_3D('',#215626,#215627,#215628); +#215626 = CARTESIAN_POINT('',(153.8,-124.7,1.51)); +#215627 = DIRECTION('',(0.,0.,1.)); +#215628 = DIRECTION('',(1.,0.,-0.)); +#215629 = CYLINDRICAL_SURFACE('',#215630,0.137255); +#215630 = AXIS2_PLACEMENT_3D('',#215631,#215632,#215633); +#215631 = CARTESIAN_POINT('',(153.8,-124.7,1.51)); +#215632 = DIRECTION('',(-0.,-0.,-1.)); +#215633 = DIRECTION('',(1.,0.,-0.)); +#215634 = ADVANCED_FACE('',(#215635,#215655),#215658,.F.); +#215635 = FACE_BOUND('',#215636,.T.); +#215636 = EDGE_LOOP('',(#215637,#215638,#215639,#215640,#215641,#215642, + #215643,#215644,#215645,#215646,#215647,#215648,#215649,#215650, + #215651,#215652,#215653,#215654)); +#215637 = ORIENTED_EDGE('',*,*,#215069,.T.); +#215638 = ORIENTED_EDGE('',*,*,#215100,.T.); +#215639 = ORIENTED_EDGE('',*,*,#215131,.T.); +#215640 = ORIENTED_EDGE('',*,*,#215162,.T.); +#215641 = ORIENTED_EDGE('',*,*,#215193,.T.); +#215642 = ORIENTED_EDGE('',*,*,#215224,.T.); +#215643 = ORIENTED_EDGE('',*,*,#215255,.T.); +#215644 = ORIENTED_EDGE('',*,*,#215287,.T.); +#215645 = ORIENTED_EDGE('',*,*,#215319,.T.); +#215646 = ORIENTED_EDGE('',*,*,#215350,.T.); +#215647 = ORIENTED_EDGE('',*,*,#215381,.T.); +#215648 = ORIENTED_EDGE('',*,*,#215412,.T.); +#215649 = ORIENTED_EDGE('',*,*,#215443,.T.); +#215650 = ORIENTED_EDGE('',*,*,#215474,.T.); +#215651 = ORIENTED_EDGE('',*,*,#215505,.T.); +#215652 = ORIENTED_EDGE('',*,*,#215536,.T.); +#215653 = ORIENTED_EDGE('',*,*,#215568,.T.); +#215654 = ORIENTED_EDGE('',*,*,#215591,.T.); +#215655 = FACE_BOUND('',#215656,.T.); +#215656 = EDGE_LOOP('',(#215657)); +#215657 = ORIENTED_EDGE('',*,*,#215623,.T.); +#215658 = PLANE('',#215659); +#215659 = AXIS2_PLACEMENT_3D('',#215660,#215661,#215662); +#215660 = CARTESIAN_POINT('',(0.,0.,1.51)); +#215661 = DIRECTION('',(0.,0.,1.)); +#215662 = DIRECTION('',(1.,0.,-0.)); +#215663 = ADVANCED_FACE('',(#215664,#215684),#215687,.T.); +#215664 = FACE_BOUND('',#215665,.F.); +#215665 = EDGE_LOOP('',(#215666,#215667,#215668,#215669,#215670,#215671, + #215672,#215673,#215674,#215675,#215676,#215677,#215678,#215679, + #215680,#215681,#215682,#215683)); +#215666 = ORIENTED_EDGE('',*,*,#215053,.T.); +#215667 = ORIENTED_EDGE('',*,*,#215084,.T.); +#215668 = ORIENTED_EDGE('',*,*,#215115,.T.); +#215669 = ORIENTED_EDGE('',*,*,#215146,.T.); +#215670 = ORIENTED_EDGE('',*,*,#215177,.T.); +#215671 = ORIENTED_EDGE('',*,*,#215208,.T.); +#215672 = ORIENTED_EDGE('',*,*,#215239,.T.); +#215673 = ORIENTED_EDGE('',*,*,#215270,.T.); +#215674 = ORIENTED_EDGE('',*,*,#215303,.T.); +#215675 = ORIENTED_EDGE('',*,*,#215334,.T.); +#215676 = ORIENTED_EDGE('',*,*,#215365,.T.); +#215677 = ORIENTED_EDGE('',*,*,#215396,.T.); +#215678 = ORIENTED_EDGE('',*,*,#215427,.T.); +#215679 = ORIENTED_EDGE('',*,*,#215458,.T.); +#215680 = ORIENTED_EDGE('',*,*,#215489,.T.); +#215681 = ORIENTED_EDGE('',*,*,#215520,.T.); +#215682 = ORIENTED_EDGE('',*,*,#215551,.T.); +#215683 = ORIENTED_EDGE('',*,*,#215584,.T.); +#215684 = FACE_BOUND('',#215685,.F.); +#215685 = EDGE_LOOP('',(#215686)); +#215686 = ORIENTED_EDGE('',*,*,#215615,.T.); +#215687 = PLANE('',#215688); +#215688 = AXIS2_PLACEMENT_3D('',#215689,#215690,#215691); +#215689 = CARTESIAN_POINT('',(0.,0.,1.545)); +#215690 = DIRECTION('',(0.,0.,1.)); +#215691 = DIRECTION('',(1.,0.,-0.)); +#215692 = MANIFOLD_SOLID_BREP('',#215693); +#215693 = CLOSED_SHELL('',(#215694,#215734,#215765,#215796,#215827, + #215858,#215889,#215922,#215953,#215984,#216015,#216046,#216077, + #216108,#216141,#216163,#216196,#216222)); +#215694 = ADVANCED_FACE('',(#215695),#215729,.T.); +#215695 = FACE_BOUND('',#215696,.T.); +#215696 = EDGE_LOOP('',(#215697,#215707,#215715,#215723)); +#215697 = ORIENTED_EDGE('',*,*,#215698,.T.); +#215698 = EDGE_CURVE('',#215699,#215701,#215703,.T.); +#215699 = VERTEX_POINT('',#215700); +#215700 = CARTESIAN_POINT('',(147.861421,-82.13,1.51)); +#215701 = VERTEX_POINT('',#215702); +#215702 = CARTESIAN_POINT('',(147.861421,-82.13,1.545)); +#215703 = LINE('',#215704,#215705); +#215704 = CARTESIAN_POINT('',(147.861421,-82.13,1.51)); +#215705 = VECTOR('',#215706,1.); +#215706 = DIRECTION('',(0.,0.,1.)); +#215707 = ORIENTED_EDGE('',*,*,#215708,.T.); +#215708 = EDGE_CURVE('',#215701,#215709,#215711,.T.); +#215709 = VERTEX_POINT('',#215710); +#215710 = CARTESIAN_POINT('',(151.049509,-82.131921,1.545)); +#215711 = LINE('',#215712,#215713); +#215712 = CARTESIAN_POINT('',(147.861421,-82.13,1.545)); +#215713 = VECTOR('',#215714,1.); +#215714 = DIRECTION('',(0.999999818463,-6.025554035141E-04,0.)); +#215715 = ORIENTED_EDGE('',*,*,#215716,.F.); +#215716 = EDGE_CURVE('',#215717,#215709,#215719,.T.); +#215717 = VERTEX_POINT('',#215718); +#215718 = CARTESIAN_POINT('',(151.049509,-82.131921,1.51)); +#215719 = LINE('',#215720,#215721); +#215720 = CARTESIAN_POINT('',(151.049509,-82.131921,1.51)); +#215721 = VECTOR('',#215722,1.); +#215722 = DIRECTION('',(0.,0.,1.)); +#215723 = ORIENTED_EDGE('',*,*,#215724,.F.); +#215724 = EDGE_CURVE('',#215699,#215717,#215725,.T.); +#215725 = LINE('',#215726,#215727); +#215726 = CARTESIAN_POINT('',(147.861421,-82.13,1.51)); +#215727 = VECTOR('',#215728,1.); +#215728 = DIRECTION('',(0.999999818463,-6.025554035141E-04,0.)); +#215729 = PLANE('',#215730); +#215730 = AXIS2_PLACEMENT_3D('',#215731,#215732,#215733); +#215731 = CARTESIAN_POINT('',(147.861421,-82.13,1.51)); +#215732 = DIRECTION('',(6.025554035141E-04,0.999999818463,-0.)); +#215733 = DIRECTION('',(0.999999818463,-6.025554035141E-04,0.)); +#215734 = ADVANCED_FACE('',(#215735),#215760,.T.); +#215735 = FACE_BOUND('',#215736,.T.); +#215736 = EDGE_LOOP('',(#215737,#215738,#215746,#215754)); +#215737 = ORIENTED_EDGE('',*,*,#215716,.T.); +#215738 = ORIENTED_EDGE('',*,*,#215739,.T.); +#215739 = EDGE_CURVE('',#215709,#215740,#215742,.T.); +#215740 = VERTEX_POINT('',#215741); +#215741 = CARTESIAN_POINT('',(151.085557,-82.146853,1.545)); +#215742 = LINE('',#215743,#215744); +#215743 = CARTESIAN_POINT('',(151.049509,-82.131921,1.545)); +#215744 = VECTOR('',#215745,1.); +#215745 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#215746 = ORIENTED_EDGE('',*,*,#215747,.F.); +#215747 = EDGE_CURVE('',#215748,#215740,#215750,.T.); +#215748 = VERTEX_POINT('',#215749); +#215749 = CARTESIAN_POINT('',(151.085557,-82.146853,1.51)); +#215750 = LINE('',#215751,#215752); +#215751 = CARTESIAN_POINT('',(151.085557,-82.146853,1.51)); +#215752 = VECTOR('',#215753,1.); +#215753 = DIRECTION('',(0.,0.,1.)); +#215754 = ORIENTED_EDGE('',*,*,#215755,.F.); +#215755 = EDGE_CURVE('',#215717,#215748,#215756,.T.); +#215756 = LINE('',#215757,#215758); +#215757 = CARTESIAN_POINT('',(151.049509,-82.131921,1.51)); +#215758 = VECTOR('',#215759,1.); +#215759 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#215760 = PLANE('',#215761); +#215761 = AXIS2_PLACEMENT_3D('',#215762,#215763,#215764); +#215762 = CARTESIAN_POINT('',(151.049509,-82.131921,1.51)); +#215763 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#215764 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#215765 = ADVANCED_FACE('',(#215766),#215791,.T.); +#215766 = FACE_BOUND('',#215767,.T.); +#215767 = EDGE_LOOP('',(#215768,#215769,#215777,#215785)); +#215768 = ORIENTED_EDGE('',*,*,#215747,.T.); +#215769 = ORIENTED_EDGE('',*,*,#215770,.T.); +#215770 = EDGE_CURVE('',#215740,#215771,#215773,.T.); +#215771 = VERTEX_POINT('',#215772); +#215772 = CARTESIAN_POINT('',(153.883148,-84.944443,1.545)); +#215773 = LINE('',#215774,#215775); +#215774 = CARTESIAN_POINT('',(151.085557,-82.146853,1.545)); +#215775 = VECTOR('',#215776,1.); +#215776 = DIRECTION('',(0.707106907564,-0.707106654809,0.)); +#215777 = ORIENTED_EDGE('',*,*,#215778,.F.); +#215778 = EDGE_CURVE('',#215779,#215771,#215781,.T.); +#215779 = VERTEX_POINT('',#215780); +#215780 = CARTESIAN_POINT('',(153.883148,-84.944443,1.51)); +#215781 = LINE('',#215782,#215783); +#215782 = CARTESIAN_POINT('',(153.883148,-84.944443,1.51)); +#215783 = VECTOR('',#215784,1.); +#215784 = DIRECTION('',(0.,0.,1.)); +#215785 = ORIENTED_EDGE('',*,*,#215786,.F.); +#215786 = EDGE_CURVE('',#215748,#215779,#215787,.T.); +#215787 = LINE('',#215788,#215789); +#215788 = CARTESIAN_POINT('',(151.085557,-82.146853,1.51)); +#215789 = VECTOR('',#215790,1.); +#215790 = DIRECTION('',(0.707106907564,-0.707106654809,0.)); +#215791 = PLANE('',#215792); +#215792 = AXIS2_PLACEMENT_3D('',#215793,#215794,#215795); +#215793 = CARTESIAN_POINT('',(151.085557,-82.146853,1.51)); +#215794 = DIRECTION('',(0.707106654809,0.707106907564,-0.)); +#215795 = DIRECTION('',(0.707106907564,-0.707106654809,0.)); +#215796 = ADVANCED_FACE('',(#215797),#215822,.T.); +#215797 = FACE_BOUND('',#215798,.T.); +#215798 = EDGE_LOOP('',(#215799,#215800,#215808,#215816)); +#215799 = ORIENTED_EDGE('',*,*,#215778,.T.); +#215800 = ORIENTED_EDGE('',*,*,#215801,.T.); +#215801 = EDGE_CURVE('',#215771,#215802,#215804,.T.); +#215802 = VERTEX_POINT('',#215803); +#215803 = CARTESIAN_POINT('',(153.898079,-84.980491,1.545)); +#215804 = LINE('',#215805,#215806); +#215805 = CARTESIAN_POINT('',(153.883148,-84.944443,1.545)); +#215806 = VECTOR('',#215807,1.); +#215807 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#215808 = ORIENTED_EDGE('',*,*,#215809,.F.); +#215809 = EDGE_CURVE('',#215810,#215802,#215812,.T.); +#215810 = VERTEX_POINT('',#215811); +#215811 = CARTESIAN_POINT('',(153.898079,-84.980491,1.51)); +#215812 = LINE('',#215813,#215814); +#215813 = CARTESIAN_POINT('',(153.898079,-84.980491,1.51)); +#215814 = VECTOR('',#215815,1.); +#215815 = DIRECTION('',(0.,0.,1.)); +#215816 = ORIENTED_EDGE('',*,*,#215817,.F.); +#215817 = EDGE_CURVE('',#215779,#215810,#215818,.T.); +#215818 = LINE('',#215819,#215820); +#215819 = CARTESIAN_POINT('',(153.883148,-84.944443,1.51)); +#215820 = VECTOR('',#215821,1.); +#215821 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#215822 = PLANE('',#215823); +#215823 = AXIS2_PLACEMENT_3D('',#215824,#215825,#215826); +#215824 = CARTESIAN_POINT('',(153.883148,-84.944443,1.51)); +#215825 = DIRECTION('',(0.923884701879,0.382670952168,-0.)); +#215826 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#215827 = ADVANCED_FACE('',(#215828),#215853,.T.); +#215828 = FACE_BOUND('',#215829,.T.); +#215829 = EDGE_LOOP('',(#215830,#215831,#215839,#215847)); +#215830 = ORIENTED_EDGE('',*,*,#215809,.T.); +#215831 = ORIENTED_EDGE('',*,*,#215832,.T.); +#215832 = EDGE_CURVE('',#215802,#215833,#215835,.T.); +#215833 = VERTEX_POINT('',#215834); +#215834 = CARTESIAN_POINT('',(153.9,-85.718869,1.545)); +#215835 = LINE('',#215836,#215837); +#215836 = CARTESIAN_POINT('',(153.898079,-84.980491,1.545)); +#215837 = VECTOR('',#215838,1.); +#215838 = DIRECTION('',(2.601639673483E-03,-0.99999661573,0.)); +#215839 = ORIENTED_EDGE('',*,*,#215840,.F.); +#215840 = EDGE_CURVE('',#215841,#215833,#215843,.T.); +#215841 = VERTEX_POINT('',#215842); +#215842 = CARTESIAN_POINT('',(153.9,-85.718869,1.51)); +#215843 = LINE('',#215844,#215845); +#215844 = CARTESIAN_POINT('',(153.9,-85.718869,1.51)); +#215845 = VECTOR('',#215846,1.); +#215846 = DIRECTION('',(0.,0.,1.)); +#215847 = ORIENTED_EDGE('',*,*,#215848,.F.); +#215848 = EDGE_CURVE('',#215810,#215841,#215849,.T.); +#215849 = LINE('',#215850,#215851); +#215850 = CARTESIAN_POINT('',(153.898079,-84.980491,1.51)); +#215851 = VECTOR('',#215852,1.); +#215852 = DIRECTION('',(2.601639673483E-03,-0.99999661573,0.)); +#215853 = PLANE('',#215854); +#215854 = AXIS2_PLACEMENT_3D('',#215855,#215856,#215857); +#215855 = CARTESIAN_POINT('',(153.898079,-84.980491,1.51)); +#215856 = DIRECTION('',(0.99999661573,2.601639673483E-03,-0.)); +#215857 = DIRECTION('',(2.601639673483E-03,-0.99999661573,0.)); +#215858 = ADVANCED_FACE('',(#215859),#215884,.T.); +#215859 = FACE_BOUND('',#215860,.T.); +#215860 = EDGE_LOOP('',(#215861,#215862,#215870,#215878)); +#215861 = ORIENTED_EDGE('',*,*,#215840,.T.); +#215862 = ORIENTED_EDGE('',*,*,#215863,.T.); +#215863 = EDGE_CURVE('',#215833,#215864,#215866,.T.); +#215864 = VERTEX_POINT('',#215865); +#215865 = CARTESIAN_POINT('',(153.914805,-85.722836,1.545)); +#215866 = LINE('',#215867,#215868); +#215867 = CARTESIAN_POINT('',(153.9,-85.718869,1.545)); +#215868 = VECTOR('',#215869,1.); +#215869 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#215870 = ORIENTED_EDGE('',*,*,#215871,.F.); +#215871 = EDGE_CURVE('',#215872,#215864,#215874,.T.); +#215872 = VERTEX_POINT('',#215873); +#215873 = CARTESIAN_POINT('',(153.914805,-85.722836,1.51)); +#215874 = LINE('',#215875,#215876); +#215875 = CARTESIAN_POINT('',(153.914805,-85.722836,1.51)); +#215876 = VECTOR('',#215877,1.); +#215877 = DIRECTION('',(0.,0.,1.)); +#215878 = ORIENTED_EDGE('',*,*,#215879,.F.); +#215879 = EDGE_CURVE('',#215841,#215872,#215880,.T.); +#215880 = LINE('',#215881,#215882); +#215881 = CARTESIAN_POINT('',(153.9,-85.718869,1.51)); +#215882 = VECTOR('',#215883,1.); +#215883 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#215884 = PLANE('',#215885); +#215885 = AXIS2_PLACEMENT_3D('',#215886,#215887,#215888); +#215886 = CARTESIAN_POINT('',(153.9,-85.718869,1.51)); +#215887 = DIRECTION('',(0.258819788119,0.965925627198,-0.)); +#215888 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#215889 = ADVANCED_FACE('',(#215890),#215917,.T.); +#215890 = FACE_BOUND('',#215891,.T.); +#215891 = EDGE_LOOP('',(#215892,#215893,#215902,#215910)); +#215892 = ORIENTED_EDGE('',*,*,#215871,.T.); +#215893 = ORIENTED_EDGE('',*,*,#215894,.T.); +#215894 = EDGE_CURVE('',#215864,#215895,#215897,.T.); +#215895 = VERTEX_POINT('',#215896); +#215896 = CARTESIAN_POINT('',(153.685195,-85.722836,1.545)); +#215897 = CIRCLE('',#215898,0.299999850918); +#215898 = AXIS2_PLACEMENT_3D('',#215899,#215900,#215901); +#215899 = CARTESIAN_POINT('',(153.8,-85.99999971069,1.545)); +#215900 = DIRECTION('',(0.,0.,-1.)); +#215901 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#215902 = ORIENTED_EDGE('',*,*,#215903,.F.); +#215903 = EDGE_CURVE('',#215904,#215895,#215906,.T.); +#215904 = VERTEX_POINT('',#215905); +#215905 = CARTESIAN_POINT('',(153.685195,-85.722836,1.51)); +#215906 = LINE('',#215907,#215908); +#215907 = CARTESIAN_POINT('',(153.685195,-85.722836,1.51)); +#215908 = VECTOR('',#215909,1.); +#215909 = DIRECTION('',(0.,0.,1.)); +#215910 = ORIENTED_EDGE('',*,*,#215911,.F.); +#215911 = EDGE_CURVE('',#215872,#215904,#215912,.T.); +#215912 = CIRCLE('',#215913,0.299999850918); +#215913 = AXIS2_PLACEMENT_3D('',#215914,#215915,#215916); +#215914 = CARTESIAN_POINT('',(153.8,-85.99999971069,1.51)); +#215915 = DIRECTION('',(0.,0.,-1.)); +#215916 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#215917 = CYLINDRICAL_SURFACE('',#215918,0.299999850918); +#215918 = AXIS2_PLACEMENT_3D('',#215919,#215920,#215921); +#215919 = CARTESIAN_POINT('',(153.8,-85.99999971069,1.51)); +#215920 = DIRECTION('',(0.,0.,-1.)); +#215921 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#215922 = ADVANCED_FACE('',(#215923),#215948,.T.); +#215923 = FACE_BOUND('',#215924,.T.); +#215924 = EDGE_LOOP('',(#215925,#215926,#215934,#215942)); +#215925 = ORIENTED_EDGE('',*,*,#215903,.T.); +#215926 = ORIENTED_EDGE('',*,*,#215927,.T.); +#215927 = EDGE_CURVE('',#215895,#215928,#215930,.T.); +#215928 = VERTEX_POINT('',#215929); +#215929 = CARTESIAN_POINT('',(153.7,-85.718869,1.545)); +#215930 = LINE('',#215931,#215932); +#215931 = CARTESIAN_POINT('',(153.685195,-85.722836,1.545)); +#215932 = VECTOR('',#215933,1.); +#215933 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#215934 = ORIENTED_EDGE('',*,*,#215935,.F.); +#215935 = EDGE_CURVE('',#215936,#215928,#215938,.T.); +#215936 = VERTEX_POINT('',#215937); +#215937 = CARTESIAN_POINT('',(153.7,-85.718869,1.51)); +#215938 = LINE('',#215939,#215940); +#215939 = CARTESIAN_POINT('',(153.7,-85.718869,1.51)); +#215940 = VECTOR('',#215941,1.); +#215941 = DIRECTION('',(0.,0.,1.)); +#215942 = ORIENTED_EDGE('',*,*,#215943,.F.); +#215943 = EDGE_CURVE('',#215904,#215936,#215944,.T.); +#215944 = LINE('',#215945,#215946); +#215945 = CARTESIAN_POINT('',(153.685195,-85.722836,1.51)); +#215946 = VECTOR('',#215947,1.); +#215947 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#215948 = PLANE('',#215949); +#215949 = AXIS2_PLACEMENT_3D('',#215950,#215951,#215952); +#215950 = CARTESIAN_POINT('',(153.685195,-85.722836,1.51)); +#215951 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#215952 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#215953 = ADVANCED_FACE('',(#215954),#215979,.T.); +#215954 = FACE_BOUND('',#215955,.T.); +#215955 = EDGE_LOOP('',(#215956,#215957,#215965,#215973)); +#215956 = ORIENTED_EDGE('',*,*,#215935,.T.); +#215957 = ORIENTED_EDGE('',*,*,#215958,.T.); +#215958 = EDGE_CURVE('',#215928,#215959,#215961,.T.); +#215959 = VERTEX_POINT('',#215960); +#215960 = CARTESIAN_POINT('',(153.7,-85.041421,1.545)); +#215961 = LINE('',#215962,#215963); +#215962 = CARTESIAN_POINT('',(153.7,-85.718869,1.545)); +#215963 = VECTOR('',#215964,1.); +#215964 = DIRECTION('',(0.,1.,0.)); +#215965 = ORIENTED_EDGE('',*,*,#215966,.F.); +#215966 = EDGE_CURVE('',#215967,#215959,#215969,.T.); +#215967 = VERTEX_POINT('',#215968); +#215968 = CARTESIAN_POINT('',(153.7,-85.041421,1.51)); +#215969 = LINE('',#215970,#215971); +#215970 = CARTESIAN_POINT('',(153.7,-85.041421,1.51)); +#215971 = VECTOR('',#215972,1.); +#215972 = DIRECTION('',(0.,0.,1.)); +#215973 = ORIENTED_EDGE('',*,*,#215974,.F.); +#215974 = EDGE_CURVE('',#215936,#215967,#215975,.T.); +#215975 = LINE('',#215976,#215977); +#215976 = CARTESIAN_POINT('',(153.7,-85.718869,1.51)); +#215977 = VECTOR('',#215978,1.); +#215978 = DIRECTION('',(0.,1.,0.)); +#215979 = PLANE('',#215980); +#215980 = AXIS2_PLACEMENT_3D('',#215981,#215982,#215983); +#215981 = CARTESIAN_POINT('',(153.7,-85.718869,1.51)); +#215982 = DIRECTION('',(-1.,0.,0.)); +#215983 = DIRECTION('',(0.,1.,0.)); +#215984 = ADVANCED_FACE('',(#215985),#216010,.T.); +#215985 = FACE_BOUND('',#215986,.T.); +#215986 = EDGE_LOOP('',(#215987,#215988,#215996,#216004)); +#215987 = ORIENTED_EDGE('',*,*,#215966,.T.); +#215988 = ORIENTED_EDGE('',*,*,#215989,.T.); +#215989 = EDGE_CURVE('',#215959,#215990,#215992,.T.); +#215990 = VERTEX_POINT('',#215991); +#215991 = CARTESIAN_POINT('',(150.988578,-82.33,1.545)); +#215992 = LINE('',#215993,#215994); +#215993 = CARTESIAN_POINT('',(153.7,-85.041421,1.545)); +#215994 = VECTOR('',#215995,1.); +#215995 = DIRECTION('',(-0.707106911581,0.707106650792,0.)); +#215996 = ORIENTED_EDGE('',*,*,#215997,.F.); +#215997 = EDGE_CURVE('',#215998,#215990,#216000,.T.); +#215998 = VERTEX_POINT('',#215999); +#215999 = CARTESIAN_POINT('',(150.988578,-82.33,1.51)); +#216000 = LINE('',#216001,#216002); +#216001 = CARTESIAN_POINT('',(150.988578,-82.33,1.51)); +#216002 = VECTOR('',#216003,1.); +#216003 = DIRECTION('',(0.,0.,1.)); +#216004 = ORIENTED_EDGE('',*,*,#216005,.F.); +#216005 = EDGE_CURVE('',#215967,#215998,#216006,.T.); +#216006 = LINE('',#216007,#216008); +#216007 = CARTESIAN_POINT('',(153.7,-85.041421,1.51)); +#216008 = VECTOR('',#216009,1.); +#216009 = DIRECTION('',(-0.707106911581,0.707106650792,0.)); +#216010 = PLANE('',#216011); +#216011 = AXIS2_PLACEMENT_3D('',#216012,#216013,#216014); +#216012 = CARTESIAN_POINT('',(153.7,-85.041421,1.51)); +#216013 = DIRECTION('',(-0.707106650792,-0.707106911581,0.)); +#216014 = DIRECTION('',(-0.707106911581,0.707106650792,0.)); +#216015 = ADVANCED_FACE('',(#216016),#216041,.T.); +#216016 = FACE_BOUND('',#216017,.T.); +#216017 = EDGE_LOOP('',(#216018,#216019,#216027,#216035)); +#216018 = ORIENTED_EDGE('',*,*,#215997,.T.); +#216019 = ORIENTED_EDGE('',*,*,#216020,.T.); +#216020 = EDGE_CURVE('',#215990,#216021,#216023,.T.); +#216021 = VERTEX_POINT('',#216022); +#216022 = CARTESIAN_POINT('',(147.800491,-82.328079,1.545)); +#216023 = LINE('',#216024,#216025); +#216024 = CARTESIAN_POINT('',(150.988578,-82.33,1.545)); +#216025 = VECTOR('',#216026,1.); +#216026 = DIRECTION('',(-0.999999818463,6.025555925117E-04,0.)); +#216027 = ORIENTED_EDGE('',*,*,#216028,.F.); +#216028 = EDGE_CURVE('',#216029,#216021,#216031,.T.); +#216029 = VERTEX_POINT('',#216030); +#216030 = CARTESIAN_POINT('',(147.800491,-82.328079,1.51)); +#216031 = LINE('',#216032,#216033); +#216032 = CARTESIAN_POINT('',(147.800491,-82.328079,1.51)); +#216033 = VECTOR('',#216034,1.); +#216034 = DIRECTION('',(0.,0.,1.)); +#216035 = ORIENTED_EDGE('',*,*,#216036,.F.); +#216036 = EDGE_CURVE('',#215998,#216029,#216037,.T.); +#216037 = LINE('',#216038,#216039); +#216038 = CARTESIAN_POINT('',(150.988578,-82.33,1.51)); +#216039 = VECTOR('',#216040,1.); +#216040 = DIRECTION('',(-0.999999818463,6.025555925117E-04,0.)); +#216041 = PLANE('',#216042); +#216042 = AXIS2_PLACEMENT_3D('',#216043,#216044,#216045); +#216043 = CARTESIAN_POINT('',(150.988578,-82.33,1.51)); +#216044 = DIRECTION('',(-6.025555925117E-04,-0.999999818463,0.)); +#216045 = DIRECTION('',(-0.999999818463,6.025555925117E-04,0.)); +#216046 = ADVANCED_FACE('',(#216047),#216072,.T.); +#216047 = FACE_BOUND('',#216048,.T.); +#216048 = EDGE_LOOP('',(#216049,#216050,#216058,#216066)); +#216049 = ORIENTED_EDGE('',*,*,#216028,.T.); +#216050 = ORIENTED_EDGE('',*,*,#216051,.T.); +#216051 = EDGE_CURVE('',#216021,#216052,#216054,.T.); +#216052 = VERTEX_POINT('',#216053); +#216053 = CARTESIAN_POINT('',(147.764443,-82.313148,1.545)); +#216054 = LINE('',#216055,#216056); +#216055 = CARTESIAN_POINT('',(147.800491,-82.328079,1.545)); +#216056 = VECTOR('',#216057,1.); +#216057 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#216058 = ORIENTED_EDGE('',*,*,#216059,.F.); +#216059 = EDGE_CURVE('',#216060,#216052,#216062,.T.); +#216060 = VERTEX_POINT('',#216061); +#216061 = CARTESIAN_POINT('',(147.764443,-82.313148,1.51)); +#216062 = LINE('',#216063,#216064); +#216063 = CARTESIAN_POINT('',(147.764443,-82.313148,1.51)); +#216064 = VECTOR('',#216065,1.); +#216065 = DIRECTION('',(0.,0.,1.)); +#216066 = ORIENTED_EDGE('',*,*,#216067,.F.); +#216067 = EDGE_CURVE('',#216029,#216060,#216068,.T.); +#216068 = LINE('',#216069,#216070); +#216069 = CARTESIAN_POINT('',(147.800491,-82.328079,1.51)); +#216070 = VECTOR('',#216071,1.); +#216071 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#216072 = PLANE('',#216073); +#216073 = AXIS2_PLACEMENT_3D('',#216074,#216075,#216076); +#216074 = CARTESIAN_POINT('',(147.800491,-82.328079,1.51)); +#216075 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#216076 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#216077 = ADVANCED_FACE('',(#216078),#216103,.T.); +#216078 = FACE_BOUND('',#216079,.T.); +#216079 = EDGE_LOOP('',(#216080,#216081,#216089,#216097)); +#216080 = ORIENTED_EDGE('',*,*,#216059,.T.); +#216081 = ORIENTED_EDGE('',*,*,#216082,.T.); +#216082 = EDGE_CURVE('',#216052,#216083,#216085,.T.); +#216083 = VERTEX_POINT('',#216084); +#216084 = CARTESIAN_POINT('',(146.666853,-81.215557,1.545)); +#216085 = LINE('',#216086,#216087); +#216086 = CARTESIAN_POINT('',(147.764443,-82.313148,1.545)); +#216087 = VECTOR('',#216088,1.); +#216088 = DIRECTION('',(-0.707106459069,0.707107103304,0.)); +#216089 = ORIENTED_EDGE('',*,*,#216090,.F.); +#216090 = EDGE_CURVE('',#216091,#216083,#216093,.T.); +#216091 = VERTEX_POINT('',#216092); +#216092 = CARTESIAN_POINT('',(146.666853,-81.215557,1.51)); +#216093 = LINE('',#216094,#216095); +#216094 = CARTESIAN_POINT('',(146.666853,-81.215557,1.51)); +#216095 = VECTOR('',#216096,1.); +#216096 = DIRECTION('',(0.,0.,1.)); +#216097 = ORIENTED_EDGE('',*,*,#216098,.F.); +#216098 = EDGE_CURVE('',#216060,#216091,#216099,.T.); +#216099 = LINE('',#216100,#216101); +#216100 = CARTESIAN_POINT('',(147.764443,-82.313148,1.51)); +#216101 = VECTOR('',#216102,1.); +#216102 = DIRECTION('',(-0.707106459069,0.707107103304,0.)); +#216103 = PLANE('',#216104); +#216104 = AXIS2_PLACEMENT_3D('',#216105,#216106,#216107); +#216105 = CARTESIAN_POINT('',(147.764443,-82.313148,1.51)); +#216106 = DIRECTION('',(-0.707107103304,-0.707106459069,0.)); +#216107 = DIRECTION('',(-0.707106459069,0.707107103304,0.)); +#216108 = ADVANCED_FACE('',(#216109),#216136,.T.); +#216109 = FACE_BOUND('',#216110,.T.); +#216110 = EDGE_LOOP('',(#216111,#216112,#216121,#216129)); +#216111 = ORIENTED_EDGE('',*,*,#216090,.T.); +#216112 = ORIENTED_EDGE('',*,*,#216113,.T.); +#216113 = EDGE_CURVE('',#216083,#216114,#216116,.T.); +#216114 = VERTEX_POINT('',#216115); +#216115 = CARTESIAN_POINT('',(146.805557,-81.076853,1.545)); +#216116 = CIRCLE('',#216117,9.999988522643E-02); +#216117 = AXIS2_PLACEMENT_3D('',#216118,#216119,#216120); +#216118 = CARTESIAN_POINT('',(146.74999951407,-81.15999951407,1.545)); +#216119 = DIRECTION('',(0.,0.,-1.)); +#216120 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#216121 = ORIENTED_EDGE('',*,*,#216122,.F.); +#216122 = EDGE_CURVE('',#216123,#216114,#216125,.T.); +#216123 = VERTEX_POINT('',#216124); +#216124 = CARTESIAN_POINT('',(146.805557,-81.076853,1.51)); +#216125 = LINE('',#216126,#216127); +#216126 = CARTESIAN_POINT('',(146.805557,-81.076853,1.51)); +#216127 = VECTOR('',#216128,1.); +#216128 = DIRECTION('',(0.,0.,1.)); +#216129 = ORIENTED_EDGE('',*,*,#216130,.F.); +#216130 = EDGE_CURVE('',#216091,#216123,#216131,.T.); +#216131 = CIRCLE('',#216132,9.999988522643E-02); +#216132 = AXIS2_PLACEMENT_3D('',#216133,#216134,#216135); +#216133 = CARTESIAN_POINT('',(146.74999951407,-81.15999951407,1.51)); +#216134 = DIRECTION('',(0.,0.,-1.)); +#216135 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#216136 = CYLINDRICAL_SURFACE('',#216137,9.999988522643E-02); +#216137 = AXIS2_PLACEMENT_3D('',#216138,#216139,#216140); +#216138 = CARTESIAN_POINT('',(146.74999951407,-81.15999951407,1.51)); +#216139 = DIRECTION('',(0.,0.,-1.)); +#216140 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#216141 = ADVANCED_FACE('',(#216142),#216158,.T.); +#216142 = FACE_BOUND('',#216143,.T.); +#216143 = EDGE_LOOP('',(#216144,#216145,#216151,#216152)); +#216144 = ORIENTED_EDGE('',*,*,#216122,.T.); +#216145 = ORIENTED_EDGE('',*,*,#216146,.T.); +#216146 = EDGE_CURVE('',#216114,#215701,#216147,.T.); +#216147 = LINE('',#216148,#216149); +#216148 = CARTESIAN_POINT('',(146.805557,-81.076853,1.545)); +#216149 = VECTOR('',#216150,1.); +#216150 = DIRECTION('',(0.708017146283,-0.706195242528,0.)); +#216151 = ORIENTED_EDGE('',*,*,#215698,.F.); +#216152 = ORIENTED_EDGE('',*,*,#216153,.F.); +#216153 = EDGE_CURVE('',#216123,#215699,#216154,.T.); +#216154 = LINE('',#216155,#216156); +#216155 = CARTESIAN_POINT('',(146.805557,-81.076853,1.51)); +#216156 = VECTOR('',#216157,1.); +#216157 = DIRECTION('',(0.708017146283,-0.706195242528,0.)); +#216158 = PLANE('',#216159); +#216159 = AXIS2_PLACEMENT_3D('',#216160,#216161,#216162); +#216160 = CARTESIAN_POINT('',(146.805557,-81.076853,1.51)); +#216161 = DIRECTION('',(0.706195242528,0.708017146283,-0.)); +#216162 = DIRECTION('',(0.708017146283,-0.706195242528,0.)); +#216163 = ADVANCED_FACE('',(#216164),#216191,.F.); +#216164 = FACE_BOUND('',#216165,.T.); +#216165 = EDGE_LOOP('',(#216166,#216176,#216183,#216184)); +#216166 = ORIENTED_EDGE('',*,*,#216167,.T.); +#216167 = EDGE_CURVE('',#216168,#216170,#216172,.T.); +#216168 = VERTEX_POINT('',#216169); +#216169 = CARTESIAN_POINT('',(153.937255,-86.,1.51)); +#216170 = VERTEX_POINT('',#216171); +#216171 = CARTESIAN_POINT('',(153.937255,-86.,1.545)); +#216172 = LINE('',#216173,#216174); +#216173 = CARTESIAN_POINT('',(153.937255,-86.,1.51)); +#216174 = VECTOR('',#216175,1.); +#216175 = DIRECTION('',(0.,0.,1.)); +#216176 = ORIENTED_EDGE('',*,*,#216177,.T.); +#216177 = EDGE_CURVE('',#216170,#216170,#216178,.T.); +#216178 = CIRCLE('',#216179,0.137255); +#216179 = AXIS2_PLACEMENT_3D('',#216180,#216181,#216182); +#216180 = CARTESIAN_POINT('',(153.8,-86.,1.545)); +#216181 = DIRECTION('',(0.,0.,1.)); +#216182 = DIRECTION('',(1.,0.,-0.)); +#216183 = ORIENTED_EDGE('',*,*,#216167,.F.); +#216184 = ORIENTED_EDGE('',*,*,#216185,.F.); +#216185 = EDGE_CURVE('',#216168,#216168,#216186,.T.); +#216186 = CIRCLE('',#216187,0.137255); +#216187 = AXIS2_PLACEMENT_3D('',#216188,#216189,#216190); +#216188 = CARTESIAN_POINT('',(153.8,-86.,1.51)); +#216189 = DIRECTION('',(0.,0.,1.)); +#216190 = DIRECTION('',(1.,0.,-0.)); +#216191 = CYLINDRICAL_SURFACE('',#216192,0.137255); +#216192 = AXIS2_PLACEMENT_3D('',#216193,#216194,#216195); +#216193 = CARTESIAN_POINT('',(153.8,-86.,1.51)); +#216194 = DIRECTION('',(-0.,-0.,-1.)); +#216195 = DIRECTION('',(1.,0.,-0.)); +#216196 = ADVANCED_FACE('',(#216197,#216214),#216217,.F.); +#216197 = FACE_BOUND('',#216198,.T.); +#216198 = EDGE_LOOP('',(#216199,#216200,#216201,#216202,#216203,#216204, + #216205,#216206,#216207,#216208,#216209,#216210,#216211,#216212, + #216213)); +#216199 = ORIENTED_EDGE('',*,*,#215724,.T.); +#216200 = ORIENTED_EDGE('',*,*,#215755,.T.); +#216201 = ORIENTED_EDGE('',*,*,#215786,.T.); +#216202 = ORIENTED_EDGE('',*,*,#215817,.T.); +#216203 = ORIENTED_EDGE('',*,*,#215848,.T.); +#216204 = ORIENTED_EDGE('',*,*,#215879,.T.); +#216205 = ORIENTED_EDGE('',*,*,#215911,.T.); +#216206 = ORIENTED_EDGE('',*,*,#215943,.T.); +#216207 = ORIENTED_EDGE('',*,*,#215974,.T.); +#216208 = ORIENTED_EDGE('',*,*,#216005,.T.); +#216209 = ORIENTED_EDGE('',*,*,#216036,.T.); +#216210 = ORIENTED_EDGE('',*,*,#216067,.T.); +#216211 = ORIENTED_EDGE('',*,*,#216098,.T.); +#216212 = ORIENTED_EDGE('',*,*,#216130,.T.); +#216213 = ORIENTED_EDGE('',*,*,#216153,.T.); +#216214 = FACE_BOUND('',#216215,.T.); +#216215 = EDGE_LOOP('',(#216216)); +#216216 = ORIENTED_EDGE('',*,*,#216185,.T.); +#216217 = PLANE('',#216218); +#216218 = AXIS2_PLACEMENT_3D('',#216219,#216220,#216221); +#216219 = CARTESIAN_POINT('',(0.,0.,1.51)); +#216220 = DIRECTION('',(0.,0.,1.)); +#216221 = DIRECTION('',(1.,0.,-0.)); +#216222 = ADVANCED_FACE('',(#216223,#216240),#216243,.T.); +#216223 = FACE_BOUND('',#216224,.F.); +#216224 = EDGE_LOOP('',(#216225,#216226,#216227,#216228,#216229,#216230, + #216231,#216232,#216233,#216234,#216235,#216236,#216237,#216238, + #216239)); +#216225 = ORIENTED_EDGE('',*,*,#215708,.T.); +#216226 = ORIENTED_EDGE('',*,*,#215739,.T.); +#216227 = ORIENTED_EDGE('',*,*,#215770,.T.); +#216228 = ORIENTED_EDGE('',*,*,#215801,.T.); +#216229 = ORIENTED_EDGE('',*,*,#215832,.T.); +#216230 = ORIENTED_EDGE('',*,*,#215863,.T.); +#216231 = ORIENTED_EDGE('',*,*,#215894,.T.); +#216232 = ORIENTED_EDGE('',*,*,#215927,.T.); +#216233 = ORIENTED_EDGE('',*,*,#215958,.T.); +#216234 = ORIENTED_EDGE('',*,*,#215989,.T.); +#216235 = ORIENTED_EDGE('',*,*,#216020,.T.); +#216236 = ORIENTED_EDGE('',*,*,#216051,.T.); +#216237 = ORIENTED_EDGE('',*,*,#216082,.T.); +#216238 = ORIENTED_EDGE('',*,*,#216113,.T.); +#216239 = ORIENTED_EDGE('',*,*,#216146,.T.); +#216240 = FACE_BOUND('',#216241,.F.); +#216241 = EDGE_LOOP('',(#216242)); +#216242 = ORIENTED_EDGE('',*,*,#216177,.T.); +#216243 = PLANE('',#216244); +#216244 = AXIS2_PLACEMENT_3D('',#216245,#216246,#216247); +#216245 = CARTESIAN_POINT('',(0.,0.,1.545)); +#216246 = DIRECTION('',(0.,0.,1.)); +#216247 = DIRECTION('',(1.,0.,-0.)); +#216248 = MANIFOLD_SOLID_BREP('',#216249); +#216249 = CLOSED_SHELL('',(#216250,#216290,#216321,#216352,#216383, + #216414,#216447,#216478,#216509,#216540,#216573,#216595,#216628, + #216661,#216686)); +#216250 = ADVANCED_FACE('',(#216251),#216285,.F.); +#216251 = FACE_BOUND('',#216252,.F.); +#216252 = EDGE_LOOP('',(#216253,#216263,#216271,#216279)); +#216253 = ORIENTED_EDGE('',*,*,#216254,.T.); +#216254 = EDGE_CURVE('',#216255,#216257,#216259,.T.); +#216255 = VERTEX_POINT('',#216256); +#216256 = CARTESIAN_POINT('',(154.083147,-86.144443,0.)); +#216257 = VERTEX_POINT('',#216258); +#216258 = CARTESIAN_POINT('',(154.083147,-86.144443,-3.5E-02)); +#216259 = LINE('',#216260,#216261); +#216260 = CARTESIAN_POINT('',(154.083147,-86.144443,0.)); +#216261 = VECTOR('',#216262,1.); +#216262 = DIRECTION('',(0.,0.,-1.)); +#216263 = ORIENTED_EDGE('',*,*,#216264,.T.); +#216264 = EDGE_CURVE('',#216257,#216265,#216267,.T.); +#216265 = VERTEX_POINT('',#216266); +#216266 = CARTESIAN_POINT('',(154.098079,-86.180491,-3.5E-02)); +#216267 = LINE('',#216268,#216269); +#216268 = CARTESIAN_POINT('',(154.083147,-86.144443,-3.5E-02)); +#216269 = VECTOR('',#216270,1.); +#216270 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#216271 = ORIENTED_EDGE('',*,*,#216272,.F.); +#216272 = EDGE_CURVE('',#216273,#216265,#216275,.T.); +#216273 = VERTEX_POINT('',#216274); +#216274 = CARTESIAN_POINT('',(154.098079,-86.180491,0.)); +#216275 = LINE('',#216276,#216277); +#216276 = CARTESIAN_POINT('',(154.098079,-86.180491,0.)); +#216277 = VECTOR('',#216278,1.); +#216278 = DIRECTION('',(0.,0.,-1.)); +#216279 = ORIENTED_EDGE('',*,*,#216280,.F.); +#216280 = EDGE_CURVE('',#216255,#216273,#216281,.T.); +#216281 = LINE('',#216282,#216283); +#216282 = CARTESIAN_POINT('',(154.083147,-86.144443,0.)); +#216283 = VECTOR('',#216284,1.); +#216284 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#216285 = PLANE('',#216286); +#216286 = AXIS2_PLACEMENT_3D('',#216287,#216288,#216289); +#216287 = CARTESIAN_POINT('',(154.083147,-86.144443,0.)); +#216288 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#216289 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#216290 = ADVANCED_FACE('',(#216291),#216316,.F.); +#216291 = FACE_BOUND('',#216292,.F.); +#216292 = EDGE_LOOP('',(#216293,#216294,#216302,#216310)); +#216293 = ORIENTED_EDGE('',*,*,#216272,.T.); +#216294 = ORIENTED_EDGE('',*,*,#216295,.T.); +#216295 = EDGE_CURVE('',#216265,#216296,#216298,.T.); +#216296 = VERTEX_POINT('',#216297); +#216297 = CARTESIAN_POINT('',(154.098079,-124.519509,-3.5E-02)); +#216298 = LINE('',#216299,#216300); +#216299 = CARTESIAN_POINT('',(154.098079,-86.180491,-3.5E-02)); +#216300 = VECTOR('',#216301,1.); +#216301 = DIRECTION('',(0.,-1.,0.)); +#216302 = ORIENTED_EDGE('',*,*,#216303,.F.); +#216303 = EDGE_CURVE('',#216304,#216296,#216306,.T.); +#216304 = VERTEX_POINT('',#216305); +#216305 = CARTESIAN_POINT('',(154.098079,-124.519509,0.)); +#216306 = LINE('',#216307,#216308); +#216307 = CARTESIAN_POINT('',(154.098079,-124.519509,0.)); +#216308 = VECTOR('',#216309,1.); +#216309 = DIRECTION('',(0.,0.,-1.)); +#216310 = ORIENTED_EDGE('',*,*,#216311,.F.); +#216311 = EDGE_CURVE('',#216273,#216304,#216312,.T.); +#216312 = LINE('',#216313,#216314); +#216313 = CARTESIAN_POINT('',(154.098079,-86.180491,0.)); +#216314 = VECTOR('',#216315,1.); +#216315 = DIRECTION('',(0.,-1.,0.)); +#216316 = PLANE('',#216317); +#216317 = AXIS2_PLACEMENT_3D('',#216318,#216319,#216320); +#216318 = CARTESIAN_POINT('',(154.098079,-86.180491,0.)); +#216319 = DIRECTION('',(-1.,-0.,-0.)); +#216320 = DIRECTION('',(0.,-1.,0.)); +#216321 = ADVANCED_FACE('',(#216322),#216347,.F.); +#216322 = FACE_BOUND('',#216323,.F.); +#216323 = EDGE_LOOP('',(#216324,#216325,#216333,#216341)); +#216324 = ORIENTED_EDGE('',*,*,#216303,.T.); +#216325 = ORIENTED_EDGE('',*,*,#216326,.T.); +#216326 = EDGE_CURVE('',#216296,#216327,#216329,.T.); +#216327 = VERTEX_POINT('',#216328); +#216328 = CARTESIAN_POINT('',(154.083147,-124.555557,-3.5E-02)); +#216329 = LINE('',#216330,#216331); +#216330 = CARTESIAN_POINT('',(154.098079,-124.519509,-3.5E-02)); +#216331 = VECTOR('',#216332,1.); +#216332 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#216333 = ORIENTED_EDGE('',*,*,#216334,.F.); +#216334 = EDGE_CURVE('',#216335,#216327,#216337,.T.); +#216335 = VERTEX_POINT('',#216336); +#216336 = CARTESIAN_POINT('',(154.083147,-124.555557,0.)); +#216337 = LINE('',#216338,#216339); +#216338 = CARTESIAN_POINT('',(154.083147,-124.555557,0.)); +#216339 = VECTOR('',#216340,1.); +#216340 = DIRECTION('',(0.,0.,-1.)); +#216341 = ORIENTED_EDGE('',*,*,#216342,.F.); +#216342 = EDGE_CURVE('',#216304,#216335,#216343,.T.); +#216343 = LINE('',#216344,#216345); +#216344 = CARTESIAN_POINT('',(154.098079,-124.519509,0.)); +#216345 = VECTOR('',#216346,1.); +#216346 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#216347 = PLANE('',#216348); +#216348 = AXIS2_PLACEMENT_3D('',#216349,#216350,#216351); +#216349 = CARTESIAN_POINT('',(154.098079,-124.519509,0.)); +#216350 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#216351 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#216352 = ADVANCED_FACE('',(#216353),#216378,.F.); +#216353 = FACE_BOUND('',#216354,.F.); +#216354 = EDGE_LOOP('',(#216355,#216356,#216364,#216372)); +#216355 = ORIENTED_EDGE('',*,*,#216334,.T.); +#216356 = ORIENTED_EDGE('',*,*,#216357,.T.); +#216357 = EDGE_CURVE('',#216327,#216358,#216360,.T.); +#216358 = VERTEX_POINT('',#216359); +#216359 = CARTESIAN_POINT('',(154.0695,-124.57192,-3.5E-02)); +#216360 = LINE('',#216361,#216362); +#216361 = CARTESIAN_POINT('',(154.083147,-124.555557,-3.5E-02)); +#216362 = VECTOR('',#216363,1.); +#216363 = DIRECTION('',(-0.640493643455,-0.767963470937,0.)); +#216364 = ORIENTED_EDGE('',*,*,#216365,.F.); +#216365 = EDGE_CURVE('',#216366,#216358,#216368,.T.); +#216366 = VERTEX_POINT('',#216367); +#216367 = CARTESIAN_POINT('',(154.0695,-124.57192,0.)); +#216368 = LINE('',#216369,#216370); +#216369 = CARTESIAN_POINT('',(154.0695,-124.57192,0.)); +#216370 = VECTOR('',#216371,1.); +#216371 = DIRECTION('',(0.,0.,-1.)); +#216372 = ORIENTED_EDGE('',*,*,#216373,.F.); +#216373 = EDGE_CURVE('',#216335,#216366,#216374,.T.); +#216374 = LINE('',#216375,#216376); +#216375 = CARTESIAN_POINT('',(154.083147,-124.555557,0.)); +#216376 = VECTOR('',#216377,1.); +#216377 = DIRECTION('',(-0.640493643455,-0.767963470937,0.)); +#216378 = PLANE('',#216379); +#216379 = AXIS2_PLACEMENT_3D('',#216380,#216381,#216382); +#216380 = CARTESIAN_POINT('',(154.083147,-124.555557,0.)); +#216381 = DIRECTION('',(-0.767963470937,0.640493643455,0.)); +#216382 = DIRECTION('',(-0.640493643455,-0.767963470937,0.)); +#216383 = ADVANCED_FACE('',(#216384),#216409,.F.); +#216384 = FACE_BOUND('',#216385,.F.); +#216385 = EDGE_LOOP('',(#216386,#216387,#216395,#216403)); +#216386 = ORIENTED_EDGE('',*,*,#216365,.T.); +#216387 = ORIENTED_EDGE('',*,*,#216388,.T.); +#216388 = EDGE_CURVE('',#216358,#216389,#216391,.T.); +#216389 = VERTEX_POINT('',#216390); +#216390 = CARTESIAN_POINT('',(154.077164,-124.585195,-3.5E-02)); +#216391 = LINE('',#216392,#216393); +#216392 = CARTESIAN_POINT('',(154.0695,-124.57192,-3.5E-02)); +#216393 = VECTOR('',#216394,1.); +#216394 = DIRECTION('',(0.499984106788,-0.86603457954,0.)); +#216395 = ORIENTED_EDGE('',*,*,#216396,.F.); +#216396 = EDGE_CURVE('',#216397,#216389,#216399,.T.); +#216397 = VERTEX_POINT('',#216398); +#216398 = CARTESIAN_POINT('',(154.077164,-124.585195,0.)); +#216399 = LINE('',#216400,#216401); +#216400 = CARTESIAN_POINT('',(154.077164,-124.585195,0.)); +#216401 = VECTOR('',#216402,1.); +#216402 = DIRECTION('',(0.,0.,-1.)); +#216403 = ORIENTED_EDGE('',*,*,#216404,.F.); +#216404 = EDGE_CURVE('',#216366,#216397,#216405,.T.); +#216405 = LINE('',#216406,#216407); +#216406 = CARTESIAN_POINT('',(154.0695,-124.57192,0.)); +#216407 = VECTOR('',#216408,1.); +#216408 = DIRECTION('',(0.499984106788,-0.86603457954,0.)); +#216409 = PLANE('',#216410); +#216410 = AXIS2_PLACEMENT_3D('',#216411,#216412,#216413); +#216411 = CARTESIAN_POINT('',(154.0695,-124.57192,0.)); +#216412 = DIRECTION('',(-0.86603457954,-0.499984106788,-0.)); +#216413 = DIRECTION('',(0.499984106788,-0.86603457954,0.)); +#216414 = ADVANCED_FACE('',(#216415),#216442,.T.); +#216415 = FACE_BOUND('',#216416,.F.); +#216416 = EDGE_LOOP('',(#216417,#216418,#216427,#216435)); +#216417 = ORIENTED_EDGE('',*,*,#216396,.T.); +#216418 = ORIENTED_EDGE('',*,*,#216419,.T.); +#216419 = EDGE_CURVE('',#216389,#216420,#216422,.T.); +#216420 = VERTEX_POINT('',#216421); +#216421 = CARTESIAN_POINT('',(153.839158,-124.402567,-3.5E-02)); +#216422 = CIRCLE('',#216423,0.299999792981); +#216423 = AXIS2_PLACEMENT_3D('',#216424,#216425,#216426); +#216424 = CARTESIAN_POINT('',(153.80000047346,-124.7000002932,-3.5E-02) + ); +#216425 = DIRECTION('',(0.,0.,-1.)); +#216426 = DIRECTION('',(0.923879059321,0.382684574746,0.)); +#216427 = ORIENTED_EDGE('',*,*,#216428,.F.); +#216428 = EDGE_CURVE('',#216429,#216420,#216431,.T.); +#216429 = VERTEX_POINT('',#216430); +#216430 = CARTESIAN_POINT('',(153.839158,-124.402567,0.)); +#216431 = LINE('',#216432,#216433); +#216432 = CARTESIAN_POINT('',(153.839158,-124.402567,0.)); +#216433 = VECTOR('',#216434,1.); +#216434 = DIRECTION('',(0.,0.,-1.)); +#216435 = ORIENTED_EDGE('',*,*,#216436,.F.); +#216436 = EDGE_CURVE('',#216397,#216429,#216437,.T.); +#216437 = CIRCLE('',#216438,0.299999792981); +#216438 = AXIS2_PLACEMENT_3D('',#216439,#216440,#216441); +#216439 = CARTESIAN_POINT('',(153.80000047346,-124.7000002932,0.)); +#216440 = DIRECTION('',(0.,0.,-1.)); +#216441 = DIRECTION('',(0.923879059321,0.382684574746,0.)); +#216442 = CYLINDRICAL_SURFACE('',#216443,0.299999792981); +#216443 = AXIS2_PLACEMENT_3D('',#216444,#216445,#216446); +#216444 = CARTESIAN_POINT('',(153.80000047346,-124.7000002932,0.)); +#216445 = DIRECTION('',(-0.,-0.,1.)); +#216446 = DIRECTION('',(0.923879059321,0.382684574746,0.)); +#216447 = ADVANCED_FACE('',(#216448),#216473,.F.); +#216448 = FACE_BOUND('',#216449,.F.); +#216449 = EDGE_LOOP('',(#216450,#216451,#216459,#216467)); +#216450 = ORIENTED_EDGE('',*,*,#216428,.T.); +#216451 = ORIENTED_EDGE('',*,*,#216452,.T.); +#216452 = EDGE_CURVE('',#216420,#216453,#216455,.T.); +#216453 = VERTEX_POINT('',#216454); +#216454 = CARTESIAN_POINT('',(153.9,-124.418869,-3.5E-02)); +#216455 = LINE('',#216456,#216457); +#216456 = CARTESIAN_POINT('',(153.839158,-124.402567,-3.5E-02)); +#216457 = VECTOR('',#216458,1.); +#216458 = DIRECTION('',(0.96592806781,-0.258810679488,0.)); +#216459 = ORIENTED_EDGE('',*,*,#216460,.F.); +#216460 = EDGE_CURVE('',#216461,#216453,#216463,.T.); +#216461 = VERTEX_POINT('',#216462); +#216462 = CARTESIAN_POINT('',(153.9,-124.418869,0.)); +#216463 = LINE('',#216464,#216465); +#216464 = CARTESIAN_POINT('',(153.9,-124.418869,0.)); +#216465 = VECTOR('',#216466,1.); +#216466 = DIRECTION('',(0.,0.,-1.)); +#216467 = ORIENTED_EDGE('',*,*,#216468,.F.); +#216468 = EDGE_CURVE('',#216429,#216461,#216469,.T.); +#216469 = LINE('',#216470,#216471); +#216470 = CARTESIAN_POINT('',(153.839158,-124.402567,0.)); +#216471 = VECTOR('',#216472,1.); +#216472 = DIRECTION('',(0.96592806781,-0.258810679488,0.)); +#216473 = PLANE('',#216474); +#216474 = AXIS2_PLACEMENT_3D('',#216475,#216476,#216477); +#216475 = CARTESIAN_POINT('',(153.839158,-124.402567,0.)); +#216476 = DIRECTION('',(-0.258810679488,-0.96592806781,-0.)); +#216477 = DIRECTION('',(0.96592806781,-0.258810679488,0.)); +#216478 = ADVANCED_FACE('',(#216479),#216504,.F.); +#216479 = FACE_BOUND('',#216480,.F.); +#216480 = EDGE_LOOP('',(#216481,#216482,#216490,#216498)); +#216481 = ORIENTED_EDGE('',*,*,#216460,.T.); +#216482 = ORIENTED_EDGE('',*,*,#216483,.T.); +#216483 = EDGE_CURVE('',#216453,#216484,#216486,.T.); +#216484 = VERTEX_POINT('',#216485); +#216485 = CARTESIAN_POINT('',(153.9,-86.28113,-3.5E-02)); +#216486 = LINE('',#216487,#216488); +#216487 = CARTESIAN_POINT('',(153.9,-124.418869,-3.5E-02)); +#216488 = VECTOR('',#216489,1.); +#216489 = DIRECTION('',(0.,1.,0.)); +#216490 = ORIENTED_EDGE('',*,*,#216491,.F.); +#216491 = EDGE_CURVE('',#216492,#216484,#216494,.T.); +#216492 = VERTEX_POINT('',#216493); +#216493 = CARTESIAN_POINT('',(153.9,-86.28113,0.)); +#216494 = LINE('',#216495,#216496); +#216495 = CARTESIAN_POINT('',(153.9,-86.28113,0.)); +#216496 = VECTOR('',#216497,1.); +#216497 = DIRECTION('',(0.,0.,-1.)); +#216498 = ORIENTED_EDGE('',*,*,#216499,.F.); +#216499 = EDGE_CURVE('',#216461,#216492,#216500,.T.); +#216500 = LINE('',#216501,#216502); +#216501 = CARTESIAN_POINT('',(153.9,-124.418869,0.)); +#216502 = VECTOR('',#216503,1.); +#216503 = DIRECTION('',(0.,1.,0.)); +#216504 = PLANE('',#216505); +#216505 = AXIS2_PLACEMENT_3D('',#216506,#216507,#216508); +#216506 = CARTESIAN_POINT('',(153.9,-124.418869,0.)); +#216507 = DIRECTION('',(1.,-0.,0.)); +#216508 = DIRECTION('',(0.,1.,0.)); +#216509 = ADVANCED_FACE('',(#216510),#216535,.F.); +#216510 = FACE_BOUND('',#216511,.F.); +#216511 = EDGE_LOOP('',(#216512,#216513,#216521,#216529)); +#216512 = ORIENTED_EDGE('',*,*,#216491,.T.); +#216513 = ORIENTED_EDGE('',*,*,#216514,.T.); +#216514 = EDGE_CURVE('',#216484,#216515,#216517,.T.); +#216515 = VERTEX_POINT('',#216516); +#216516 = CARTESIAN_POINT('',(153.839158,-86.297433,-3.5E-02)); +#216517 = LINE('',#216518,#216519); +#216518 = CARTESIAN_POINT('',(153.9,-86.28113,-3.5E-02)); +#216519 = VECTOR('',#216520,1.); +#216520 = DIRECTION('',(-0.96592409883,-0.258825491983,0.)); +#216521 = ORIENTED_EDGE('',*,*,#216522,.F.); +#216522 = EDGE_CURVE('',#216523,#216515,#216525,.T.); +#216523 = VERTEX_POINT('',#216524); +#216524 = CARTESIAN_POINT('',(153.839158,-86.297433,0.)); +#216525 = LINE('',#216526,#216527); +#216526 = CARTESIAN_POINT('',(153.839158,-86.297433,0.)); +#216527 = VECTOR('',#216528,1.); +#216528 = DIRECTION('',(0.,0.,-1.)); +#216529 = ORIENTED_EDGE('',*,*,#216530,.F.); +#216530 = EDGE_CURVE('',#216492,#216523,#216531,.T.); +#216531 = LINE('',#216532,#216533); +#216532 = CARTESIAN_POINT('',(153.9,-86.28113,0.)); +#216533 = VECTOR('',#216534,1.); +#216534 = DIRECTION('',(-0.96592409883,-0.258825491983,0.)); +#216535 = PLANE('',#216536); +#216536 = AXIS2_PLACEMENT_3D('',#216537,#216538,#216539); +#216537 = CARTESIAN_POINT('',(153.9,-86.28113,0.)); +#216538 = DIRECTION('',(-0.258825491983,0.96592409883,0.)); +#216539 = DIRECTION('',(-0.96592409883,-0.258825491983,0.)); +#216540 = ADVANCED_FACE('',(#216541),#216568,.T.); +#216541 = FACE_BOUND('',#216542,.F.); +#216542 = EDGE_LOOP('',(#216543,#216544,#216553,#216561)); +#216543 = ORIENTED_EDGE('',*,*,#216522,.T.); +#216544 = ORIENTED_EDGE('',*,*,#216545,.T.); +#216545 = EDGE_CURVE('',#216515,#216546,#216548,.T.); +#216546 = VERTEX_POINT('',#216547); +#216547 = CARTESIAN_POINT('',(154.070711,-86.12929,-3.5E-02)); +#216548 = CIRCLE('',#216549,0.300000929493); +#216549 = AXIS2_PLACEMENT_3D('',#216550,#216551,#216552); +#216550 = CARTESIAN_POINT('',(153.80000029177,-85.9999985844,-3.5E-02)); +#216551 = DIRECTION('',(0.,0.,-1.)); +#216552 = DIRECTION('',(0.130525289683,-0.991444980195,0.)); +#216553 = ORIENTED_EDGE('',*,*,#216554,.F.); +#216554 = EDGE_CURVE('',#216555,#216546,#216557,.T.); +#216555 = VERTEX_POINT('',#216556); +#216556 = CARTESIAN_POINT('',(154.070711,-86.12929,0.)); +#216557 = LINE('',#216558,#216559); +#216558 = CARTESIAN_POINT('',(154.070711,-86.12929,0.)); +#216559 = VECTOR('',#216560,1.); +#216560 = DIRECTION('',(0.,0.,-1.)); +#216561 = ORIENTED_EDGE('',*,*,#216562,.F.); +#216562 = EDGE_CURVE('',#216523,#216555,#216563,.T.); +#216563 = CIRCLE('',#216564,0.300000929493); +#216564 = AXIS2_PLACEMENT_3D('',#216565,#216566,#216567); +#216565 = CARTESIAN_POINT('',(153.80000029177,-85.9999985844,0.)); +#216566 = DIRECTION('',(0.,0.,-1.)); +#216567 = DIRECTION('',(0.130525289683,-0.991444980195,0.)); +#216568 = CYLINDRICAL_SURFACE('',#216569,0.300000929493); +#216569 = AXIS2_PLACEMENT_3D('',#216570,#216571,#216572); +#216570 = CARTESIAN_POINT('',(153.80000029177,-85.9999985844,0.)); +#216571 = DIRECTION('',(-0.,-0.,1.)); +#216572 = DIRECTION('',(0.130525289683,-0.991444980195,0.)); +#216573 = ADVANCED_FACE('',(#216574),#216590,.F.); +#216574 = FACE_BOUND('',#216575,.F.); +#216575 = EDGE_LOOP('',(#216576,#216577,#216583,#216584)); +#216576 = ORIENTED_EDGE('',*,*,#216554,.T.); +#216577 = ORIENTED_EDGE('',*,*,#216578,.T.); +#216578 = EDGE_CURVE('',#216546,#216257,#216579,.T.); +#216579 = LINE('',#216580,#216581); +#216580 = CARTESIAN_POINT('',(154.070711,-86.12929,-3.5E-02)); +#216581 = VECTOR('',#216582,1.); +#216582 = DIRECTION('',(0.63440103536,-0.773004092055,0.)); +#216583 = ORIENTED_EDGE('',*,*,#216254,.F.); +#216584 = ORIENTED_EDGE('',*,*,#216585,.F.); +#216585 = EDGE_CURVE('',#216555,#216255,#216586,.T.); +#216586 = LINE('',#216587,#216588); +#216587 = CARTESIAN_POINT('',(154.070711,-86.12929,0.)); +#216588 = VECTOR('',#216589,1.); +#216589 = DIRECTION('',(0.63440103536,-0.773004092055,0.)); +#216590 = PLANE('',#216591); +#216591 = AXIS2_PLACEMENT_3D('',#216592,#216593,#216594); +#216592 = CARTESIAN_POINT('',(154.070711,-86.12929,0.)); +#216593 = DIRECTION('',(-0.773004092055,-0.63440103536,-0.)); +#216594 = DIRECTION('',(0.63440103536,-0.773004092055,0.)); +#216595 = ADVANCED_FACE('',(#216596),#216623,.F.); +#216596 = FACE_BOUND('',#216597,.F.); +#216597 = EDGE_LOOP('',(#216598,#216608,#216615,#216616)); +#216598 = ORIENTED_EDGE('',*,*,#216599,.T.); +#216599 = EDGE_CURVE('',#216600,#216602,#216604,.T.); +#216600 = VERTEX_POINT('',#216601); +#216601 = CARTESIAN_POINT('',(153.937255,-124.7,0.)); +#216602 = VERTEX_POINT('',#216603); +#216603 = CARTESIAN_POINT('',(153.937255,-124.7,-3.5E-02)); +#216604 = LINE('',#216605,#216606); +#216605 = CARTESIAN_POINT('',(153.937255,-124.7,0.)); +#216606 = VECTOR('',#216607,1.); +#216607 = DIRECTION('',(0.,0.,-1.)); +#216608 = ORIENTED_EDGE('',*,*,#216609,.T.); +#216609 = EDGE_CURVE('',#216602,#216602,#216610,.T.); +#216610 = CIRCLE('',#216611,0.137255); +#216611 = AXIS2_PLACEMENT_3D('',#216612,#216613,#216614); +#216612 = CARTESIAN_POINT('',(153.8,-124.7,-3.5E-02)); +#216613 = DIRECTION('',(0.,0.,1.)); +#216614 = DIRECTION('',(1.,0.,-0.)); +#216615 = ORIENTED_EDGE('',*,*,#216599,.F.); +#216616 = ORIENTED_EDGE('',*,*,#216617,.F.); +#216617 = EDGE_CURVE('',#216600,#216600,#216618,.T.); +#216618 = CIRCLE('',#216619,0.137255); +#216619 = AXIS2_PLACEMENT_3D('',#216620,#216621,#216622); +#216620 = CARTESIAN_POINT('',(153.8,-124.7,0.)); +#216621 = DIRECTION('',(0.,0.,1.)); +#216622 = DIRECTION('',(1.,0.,-0.)); +#216623 = CYLINDRICAL_SURFACE('',#216624,0.137255); +#216624 = AXIS2_PLACEMENT_3D('',#216625,#216626,#216627); +#216625 = CARTESIAN_POINT('',(153.8,-124.7,0.)); +#216626 = DIRECTION('',(0.,0.,1.)); +#216627 = DIRECTION('',(1.,0.,-0.)); +#216628 = ADVANCED_FACE('',(#216629),#216656,.F.); +#216629 = FACE_BOUND('',#216630,.F.); +#216630 = EDGE_LOOP('',(#216631,#216641,#216648,#216649)); +#216631 = ORIENTED_EDGE('',*,*,#216632,.T.); +#216632 = EDGE_CURVE('',#216633,#216635,#216637,.T.); +#216633 = VERTEX_POINT('',#216634); +#216634 = CARTESIAN_POINT('',(153.937255,-86.,0.)); +#216635 = VERTEX_POINT('',#216636); +#216636 = CARTESIAN_POINT('',(153.937255,-86.,-3.5E-02)); +#216637 = LINE('',#216638,#216639); +#216638 = CARTESIAN_POINT('',(153.937255,-86.,0.)); +#216639 = VECTOR('',#216640,1.); +#216640 = DIRECTION('',(0.,0.,-1.)); +#216641 = ORIENTED_EDGE('',*,*,#216642,.T.); +#216642 = EDGE_CURVE('',#216635,#216635,#216643,.T.); +#216643 = CIRCLE('',#216644,0.137255); +#216644 = AXIS2_PLACEMENT_3D('',#216645,#216646,#216647); +#216645 = CARTESIAN_POINT('',(153.8,-86.,-3.5E-02)); +#216646 = DIRECTION('',(0.,0.,1.)); +#216647 = DIRECTION('',(1.,0.,-0.)); +#216648 = ORIENTED_EDGE('',*,*,#216632,.F.); +#216649 = ORIENTED_EDGE('',*,*,#216650,.F.); +#216650 = EDGE_CURVE('',#216633,#216633,#216651,.T.); +#216651 = CIRCLE('',#216652,0.137255); +#216652 = AXIS2_PLACEMENT_3D('',#216653,#216654,#216655); +#216653 = CARTESIAN_POINT('',(153.8,-86.,0.)); +#216654 = DIRECTION('',(0.,0.,1.)); +#216655 = DIRECTION('',(1.,0.,-0.)); +#216656 = CYLINDRICAL_SURFACE('',#216657,0.137255); +#216657 = AXIS2_PLACEMENT_3D('',#216658,#216659,#216660); +#216658 = CARTESIAN_POINT('',(153.8,-86.,0.)); +#216659 = DIRECTION('',(0.,0.,1.)); +#216660 = DIRECTION('',(1.,0.,-0.)); +#216661 = ADVANCED_FACE('',(#216662,#216675,#216678),#216681,.F.); +#216662 = FACE_BOUND('',#216663,.F.); +#216663 = EDGE_LOOP('',(#216664,#216665,#216666,#216667,#216668,#216669, + #216670,#216671,#216672,#216673,#216674)); +#216664 = ORIENTED_EDGE('',*,*,#216280,.T.); +#216665 = ORIENTED_EDGE('',*,*,#216311,.T.); +#216666 = ORIENTED_EDGE('',*,*,#216342,.T.); +#216667 = ORIENTED_EDGE('',*,*,#216373,.T.); +#216668 = ORIENTED_EDGE('',*,*,#216404,.T.); +#216669 = ORIENTED_EDGE('',*,*,#216436,.T.); +#216670 = ORIENTED_EDGE('',*,*,#216468,.T.); +#216671 = ORIENTED_EDGE('',*,*,#216499,.T.); +#216672 = ORIENTED_EDGE('',*,*,#216530,.T.); +#216673 = ORIENTED_EDGE('',*,*,#216562,.T.); +#216674 = ORIENTED_EDGE('',*,*,#216585,.T.); +#216675 = FACE_BOUND('',#216676,.F.); +#216676 = EDGE_LOOP('',(#216677)); +#216677 = ORIENTED_EDGE('',*,*,#216617,.T.); +#216678 = FACE_BOUND('',#216679,.F.); +#216679 = EDGE_LOOP('',(#216680)); +#216680 = ORIENTED_EDGE('',*,*,#216650,.T.); +#216681 = PLANE('',#216682); +#216682 = AXIS2_PLACEMENT_3D('',#216683,#216684,#216685); +#216683 = CARTESIAN_POINT('',(0.,0.,0.)); +#216684 = DIRECTION('',(-0.,-0.,-1.)); +#216685 = DIRECTION('',(-1.,0.,0.)); +#216686 = ADVANCED_FACE('',(#216687,#216700,#216703),#216706,.T.); +#216687 = FACE_BOUND('',#216688,.T.); +#216688 = EDGE_LOOP('',(#216689,#216690,#216691,#216692,#216693,#216694, + #216695,#216696,#216697,#216698,#216699)); +#216689 = ORIENTED_EDGE('',*,*,#216264,.T.); +#216690 = ORIENTED_EDGE('',*,*,#216295,.T.); +#216691 = ORIENTED_EDGE('',*,*,#216326,.T.); +#216692 = ORIENTED_EDGE('',*,*,#216357,.T.); +#216693 = ORIENTED_EDGE('',*,*,#216388,.T.); +#216694 = ORIENTED_EDGE('',*,*,#216419,.T.); +#216695 = ORIENTED_EDGE('',*,*,#216452,.T.); +#216696 = ORIENTED_EDGE('',*,*,#216483,.T.); +#216697 = ORIENTED_EDGE('',*,*,#216514,.T.); +#216698 = ORIENTED_EDGE('',*,*,#216545,.T.); +#216699 = ORIENTED_EDGE('',*,*,#216578,.T.); +#216700 = FACE_BOUND('',#216701,.T.); +#216701 = EDGE_LOOP('',(#216702)); +#216702 = ORIENTED_EDGE('',*,*,#216609,.T.); +#216703 = FACE_BOUND('',#216704,.T.); +#216704 = EDGE_LOOP('',(#216705)); +#216705 = ORIENTED_EDGE('',*,*,#216642,.T.); +#216706 = PLANE('',#216707); +#216707 = AXIS2_PLACEMENT_3D('',#216708,#216709,#216710); +#216708 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#216709 = DIRECTION('',(-0.,-0.,-1.)); +#216710 = DIRECTION('',(-1.,0.,0.)); +#216711 = MANIFOLD_SOLID_BREP('',#216712); +#216712 = CLOSED_SHELL('',(#216713,#216753,#216784,#216817,#216848, + #216879,#216910,#216941,#216974,#217005,#217027,#217045)); +#216713 = ADVANCED_FACE('',(#216714),#216748,.T.); +#216714 = FACE_BOUND('',#216715,.T.); +#216715 = EDGE_LOOP('',(#216716,#216726,#216734,#216742)); +#216716 = ORIENTED_EDGE('',*,*,#216717,.T.); +#216717 = EDGE_CURVE('',#216718,#216720,#216722,.T.); +#216718 = VERTEX_POINT('',#216719); +#216719 = CARTESIAN_POINT('',(128.244443,-67.106853,1.51)); +#216720 = VERTEX_POINT('',#216721); +#216721 = CARTESIAN_POINT('',(128.244443,-67.106853,1.545)); +#216722 = LINE('',#216723,#216724); +#216723 = CARTESIAN_POINT('',(128.244443,-67.106853,1.51)); +#216724 = VECTOR('',#216725,1.); +#216725 = DIRECTION('',(0.,0.,1.)); +#216726 = ORIENTED_EDGE('',*,*,#216727,.T.); +#216727 = EDGE_CURVE('',#216720,#216728,#216730,.T.); +#216728 = VERTEX_POINT('',#216729); +#216729 = CARTESIAN_POINT('',(128.280491,-67.091921,1.545)); +#216730 = LINE('',#216731,#216732); +#216731 = CARTESIAN_POINT('',(128.244443,-67.106853,1.545)); +#216732 = VECTOR('',#216733,1.); +#216733 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#216734 = ORIENTED_EDGE('',*,*,#216735,.F.); +#216735 = EDGE_CURVE('',#216736,#216728,#216738,.T.); +#216736 = VERTEX_POINT('',#216737); +#216737 = CARTESIAN_POINT('',(128.280491,-67.091921,1.51)); +#216738 = LINE('',#216739,#216740); +#216739 = CARTESIAN_POINT('',(128.280491,-67.091921,1.51)); +#216740 = VECTOR('',#216741,1.); +#216741 = DIRECTION('',(0.,0.,1.)); +#216742 = ORIENTED_EDGE('',*,*,#216743,.F.); +#216743 = EDGE_CURVE('',#216718,#216736,#216744,.T.); +#216744 = LINE('',#216745,#216746); +#216745 = CARTESIAN_POINT('',(128.244443,-67.106853,1.51)); +#216746 = VECTOR('',#216747,1.); +#216747 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#216748 = PLANE('',#216749); +#216749 = AXIS2_PLACEMENT_3D('',#216750,#216751,#216752); +#216750 = CARTESIAN_POINT('',(128.244443,-67.106853,1.51)); +#216751 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#216752 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#216753 = ADVANCED_FACE('',(#216754),#216779,.T.); +#216754 = FACE_BOUND('',#216755,.T.); +#216755 = EDGE_LOOP('',(#216756,#216757,#216765,#216773)); +#216756 = ORIENTED_EDGE('',*,*,#216735,.T.); +#216757 = ORIENTED_EDGE('',*,*,#216758,.T.); +#216758 = EDGE_CURVE('',#216728,#216759,#216761,.T.); +#216759 = VERTEX_POINT('',#216760); +#216760 = CARTESIAN_POINT('',(129.269509,-67.091921,1.545)); +#216761 = LINE('',#216762,#216763); +#216762 = CARTESIAN_POINT('',(128.280491,-67.091921,1.545)); +#216763 = VECTOR('',#216764,1.); +#216764 = DIRECTION('',(1.,0.,0.)); +#216765 = ORIENTED_EDGE('',*,*,#216766,.F.); +#216766 = EDGE_CURVE('',#216767,#216759,#216769,.T.); +#216767 = VERTEX_POINT('',#216768); +#216768 = CARTESIAN_POINT('',(129.269509,-67.091921,1.51)); +#216769 = LINE('',#216770,#216771); +#216770 = CARTESIAN_POINT('',(129.269509,-67.091921,1.51)); +#216771 = VECTOR('',#216772,1.); +#216772 = DIRECTION('',(0.,0.,1.)); +#216773 = ORIENTED_EDGE('',*,*,#216774,.F.); +#216774 = EDGE_CURVE('',#216736,#216767,#216775,.T.); +#216775 = LINE('',#216776,#216777); +#216776 = CARTESIAN_POINT('',(128.280491,-67.091921,1.51)); +#216777 = VECTOR('',#216778,1.); +#216778 = DIRECTION('',(1.,0.,0.)); +#216779 = PLANE('',#216780); +#216780 = AXIS2_PLACEMENT_3D('',#216781,#216782,#216783); +#216781 = CARTESIAN_POINT('',(128.280491,-67.091921,1.51)); +#216782 = DIRECTION('',(0.,1.,0.)); +#216783 = DIRECTION('',(1.,0.,0.)); +#216784 = ADVANCED_FACE('',(#216785),#216812,.T.); +#216785 = FACE_BOUND('',#216786,.T.); +#216786 = EDGE_LOOP('',(#216787,#216788,#216797,#216805)); +#216787 = ORIENTED_EDGE('',*,*,#216766,.T.); +#216788 = ORIENTED_EDGE('',*,*,#216789,.T.); +#216789 = EDGE_CURVE('',#216759,#216790,#216792,.T.); +#216790 = VERTEX_POINT('',#216791); +#216791 = CARTESIAN_POINT('',(129.269509,-67.288079,1.545)); +#216792 = CIRCLE('',#216793,0.100000456609); +#216793 = AXIS2_PLACEMENT_3D('',#216794,#216795,#216796); +#216794 = CARTESIAN_POINT('',(129.25,-67.19,1.545)); +#216795 = DIRECTION('',(0.,0.,-1.)); +#216796 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#216797 = ORIENTED_EDGE('',*,*,#216798,.F.); +#216798 = EDGE_CURVE('',#216799,#216790,#216801,.T.); +#216799 = VERTEX_POINT('',#216800); +#216800 = CARTESIAN_POINT('',(129.269509,-67.288079,1.51)); +#216801 = LINE('',#216802,#216803); +#216802 = CARTESIAN_POINT('',(129.269509,-67.288079,1.51)); +#216803 = VECTOR('',#216804,1.); +#216804 = DIRECTION('',(0.,0.,1.)); +#216805 = ORIENTED_EDGE('',*,*,#216806,.F.); +#216806 = EDGE_CURVE('',#216767,#216799,#216807,.T.); +#216807 = CIRCLE('',#216808,0.100000456609); +#216808 = AXIS2_PLACEMENT_3D('',#216809,#216810,#216811); +#216809 = CARTESIAN_POINT('',(129.25,-67.19,1.51)); +#216810 = DIRECTION('',(0.,0.,-1.)); +#216811 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#216812 = CYLINDRICAL_SURFACE('',#216813,0.100000456609); +#216813 = AXIS2_PLACEMENT_3D('',#216814,#216815,#216816); +#216814 = CARTESIAN_POINT('',(129.25,-67.19,1.51)); +#216815 = DIRECTION('',(0.,0.,-1.)); +#216816 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#216817 = ADVANCED_FACE('',(#216818),#216843,.T.); +#216818 = FACE_BOUND('',#216819,.T.); +#216819 = EDGE_LOOP('',(#216820,#216821,#216829,#216837)); +#216820 = ORIENTED_EDGE('',*,*,#216798,.T.); +#216821 = ORIENTED_EDGE('',*,*,#216822,.T.); +#216822 = EDGE_CURVE('',#216790,#216823,#216825,.T.); +#216823 = VERTEX_POINT('',#216824); +#216824 = CARTESIAN_POINT('',(128.341422,-67.29,1.545)); +#216825 = LINE('',#216826,#216827); +#216826 = CARTESIAN_POINT('',(129.269509,-67.288079,1.545)); +#216827 = VECTOR('',#216828,1.); +#216828 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#216829 = ORIENTED_EDGE('',*,*,#216830,.F.); +#216830 = EDGE_CURVE('',#216831,#216823,#216833,.T.); +#216831 = VERTEX_POINT('',#216832); +#216832 = CARTESIAN_POINT('',(128.341422,-67.29,1.51)); +#216833 = LINE('',#216834,#216835); +#216834 = CARTESIAN_POINT('',(128.341422,-67.29,1.51)); +#216835 = VECTOR('',#216836,1.); +#216836 = DIRECTION('',(0.,0.,1.)); +#216837 = ORIENTED_EDGE('',*,*,#216838,.F.); +#216838 = EDGE_CURVE('',#216799,#216831,#216839,.T.); +#216839 = LINE('',#216840,#216841); +#216840 = CARTESIAN_POINT('',(129.269509,-67.288079,1.51)); +#216841 = VECTOR('',#216842,1.); +#216842 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#216843 = PLANE('',#216844); +#216844 = AXIS2_PLACEMENT_3D('',#216845,#216846,#216847); +#216845 = CARTESIAN_POINT('',(129.269509,-67.288079,1.51)); +#216846 = DIRECTION('',(2.069844621223E-03,-0.999997857869,0.)); +#216847 = DIRECTION('',(-0.999997857869,-2.069844621223E-03,0.)); +#216848 = ADVANCED_FACE('',(#216849),#216874,.T.); +#216849 = FACE_BOUND('',#216850,.T.); +#216850 = EDGE_LOOP('',(#216851,#216852,#216860,#216868)); +#216851 = ORIENTED_EDGE('',*,*,#216830,.T.); +#216852 = ORIENTED_EDGE('',*,*,#216853,.T.); +#216853 = EDGE_CURVE('',#216823,#216854,#216856,.T.); +#216854 = VERTEX_POINT('',#216855); +#216855 = CARTESIAN_POINT('',(128.145557,-67.483147,1.545)); +#216856 = LINE('',#216857,#216858); +#216857 = CARTESIAN_POINT('',(128.341422,-67.29,1.545)); +#216858 = VECTOR('',#216859,1.); +#216859 = DIRECTION('',(-0.71202990803,-0.702149136631,0.)); +#216860 = ORIENTED_EDGE('',*,*,#216861,.F.); +#216861 = EDGE_CURVE('',#216862,#216854,#216864,.T.); +#216862 = VERTEX_POINT('',#216863); +#216863 = CARTESIAN_POINT('',(128.145557,-67.483147,1.51)); +#216864 = LINE('',#216865,#216866); +#216865 = CARTESIAN_POINT('',(128.145557,-67.483147,1.51)); +#216866 = VECTOR('',#216867,1.); +#216867 = DIRECTION('',(0.,0.,1.)); +#216868 = ORIENTED_EDGE('',*,*,#216869,.F.); +#216869 = EDGE_CURVE('',#216831,#216862,#216870,.T.); +#216870 = LINE('',#216871,#216872); +#216871 = CARTESIAN_POINT('',(128.341422,-67.29,1.51)); +#216872 = VECTOR('',#216873,1.); +#216873 = DIRECTION('',(-0.71202990803,-0.702149136631,0.)); +#216874 = PLANE('',#216875); +#216875 = AXIS2_PLACEMENT_3D('',#216876,#216877,#216878); +#216876 = CARTESIAN_POINT('',(128.341422,-67.29,1.51)); +#216877 = DIRECTION('',(0.702149136631,-0.71202990803,0.)); +#216878 = DIRECTION('',(-0.71202990803,-0.702149136631,0.)); +#216879 = ADVANCED_FACE('',(#216880),#216905,.T.); +#216880 = FACE_BOUND('',#216881,.T.); +#216881 = EDGE_LOOP('',(#216882,#216883,#216891,#216899)); +#216882 = ORIENTED_EDGE('',*,*,#216861,.T.); +#216883 = ORIENTED_EDGE('',*,*,#216884,.T.); +#216884 = EDGE_CURVE('',#216854,#216885,#216887,.T.); +#216885 = VERTEX_POINT('',#216886); +#216886 = CARTESIAN_POINT('',(128.109509,-67.498079,1.545)); +#216887 = LINE('',#216888,#216889); +#216888 = CARTESIAN_POINT('',(128.145557,-67.483147,1.545)); +#216889 = VECTOR('',#216890,1.); +#216890 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#216891 = ORIENTED_EDGE('',*,*,#216892,.F.); +#216892 = EDGE_CURVE('',#216893,#216885,#216895,.T.); +#216893 = VERTEX_POINT('',#216894); +#216894 = CARTESIAN_POINT('',(128.109509,-67.498079,1.51)); +#216895 = LINE('',#216896,#216897); +#216896 = CARTESIAN_POINT('',(128.109509,-67.498079,1.51)); +#216897 = VECTOR('',#216898,1.); +#216898 = DIRECTION('',(0.,0.,1.)); +#216899 = ORIENTED_EDGE('',*,*,#216900,.F.); +#216900 = EDGE_CURVE('',#216862,#216893,#216901,.T.); +#216901 = LINE('',#216902,#216903); +#216902 = CARTESIAN_POINT('',(128.145557,-67.483147,1.51)); +#216903 = VECTOR('',#216904,1.); +#216904 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#216905 = PLANE('',#216906); +#216906 = AXIS2_PLACEMENT_3D('',#216907,#216908,#216909); +#216907 = CARTESIAN_POINT('',(128.145557,-67.483147,1.51)); +#216908 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#216909 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#216910 = ADVANCED_FACE('',(#216911),#216936,.T.); +#216911 = FACE_BOUND('',#216912,.T.); +#216912 = EDGE_LOOP('',(#216913,#216914,#216922,#216930)); +#216913 = ORIENTED_EDGE('',*,*,#216892,.T.); +#216914 = ORIENTED_EDGE('',*,*,#216915,.T.); +#216915 = EDGE_CURVE('',#216885,#216916,#216918,.T.); +#216916 = VERTEX_POINT('',#216917); +#216917 = CARTESIAN_POINT('',(127.380491,-67.498079,1.545)); +#216918 = LINE('',#216919,#216920); +#216919 = CARTESIAN_POINT('',(128.109509,-67.498079,1.545)); +#216920 = VECTOR('',#216921,1.); +#216921 = DIRECTION('',(-1.,0.,0.)); +#216922 = ORIENTED_EDGE('',*,*,#216923,.F.); +#216923 = EDGE_CURVE('',#216924,#216916,#216926,.T.); +#216924 = VERTEX_POINT('',#216925); +#216925 = CARTESIAN_POINT('',(127.380491,-67.498079,1.51)); +#216926 = LINE('',#216927,#216928); +#216927 = CARTESIAN_POINT('',(127.380491,-67.498079,1.51)); +#216928 = VECTOR('',#216929,1.); +#216929 = DIRECTION('',(0.,0.,1.)); +#216930 = ORIENTED_EDGE('',*,*,#216931,.F.); +#216931 = EDGE_CURVE('',#216893,#216924,#216932,.T.); +#216932 = LINE('',#216933,#216934); +#216933 = CARTESIAN_POINT('',(128.109509,-67.498079,1.51)); +#216934 = VECTOR('',#216935,1.); +#216935 = DIRECTION('',(-1.,0.,0.)); +#216936 = PLANE('',#216937); +#216937 = AXIS2_PLACEMENT_3D('',#216938,#216939,#216940); +#216938 = CARTESIAN_POINT('',(128.109509,-67.498079,1.51)); +#216939 = DIRECTION('',(0.,-1.,0.)); +#216940 = DIRECTION('',(-1.,0.,0.)); +#216941 = ADVANCED_FACE('',(#216942),#216969,.T.); +#216942 = FACE_BOUND('',#216943,.T.); +#216943 = EDGE_LOOP('',(#216944,#216945,#216954,#216962)); +#216944 = ORIENTED_EDGE('',*,*,#216923,.T.); +#216945 = ORIENTED_EDGE('',*,*,#216946,.T.); +#216946 = EDGE_CURVE('',#216916,#216947,#216949,.T.); +#216947 = VERTEX_POINT('',#216948); +#216948 = CARTESIAN_POINT('',(127.380491,-67.301921,1.545)); +#216949 = CIRCLE('',#216950,0.100000456609); +#216950 = AXIS2_PLACEMENT_3D('',#216951,#216952,#216953); +#216951 = CARTESIAN_POINT('',(127.4,-67.4,1.545)); +#216952 = DIRECTION('',(0.,0.,-1.)); +#216953 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#216954 = ORIENTED_EDGE('',*,*,#216955,.F.); +#216955 = EDGE_CURVE('',#216956,#216947,#216958,.T.); +#216956 = VERTEX_POINT('',#216957); +#216957 = CARTESIAN_POINT('',(127.380491,-67.301921,1.51)); +#216958 = LINE('',#216959,#216960); +#216959 = CARTESIAN_POINT('',(127.380491,-67.301921,1.51)); +#216960 = VECTOR('',#216961,1.); +#216961 = DIRECTION('',(0.,0.,1.)); +#216962 = ORIENTED_EDGE('',*,*,#216963,.F.); +#216963 = EDGE_CURVE('',#216924,#216956,#216964,.T.); +#216964 = CIRCLE('',#216965,0.100000456609); +#216965 = AXIS2_PLACEMENT_3D('',#216966,#216967,#216968); +#216966 = CARTESIAN_POINT('',(127.4,-67.4,1.51)); +#216967 = DIRECTION('',(0.,0.,-1.)); +#216968 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#216969 = CYLINDRICAL_SURFACE('',#216970,0.100000456609); +#216970 = AXIS2_PLACEMENT_3D('',#216971,#216972,#216973); +#216971 = CARTESIAN_POINT('',(127.4,-67.4,1.51)); +#216972 = DIRECTION('',(0.,0.,-1.)); +#216973 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#216974 = ADVANCED_FACE('',(#216975),#217000,.T.); +#216975 = FACE_BOUND('',#216976,.T.); +#216976 = EDGE_LOOP('',(#216977,#216978,#216986,#216994)); +#216977 = ORIENTED_EDGE('',*,*,#216955,.T.); +#216978 = ORIENTED_EDGE('',*,*,#216979,.T.); +#216979 = EDGE_CURVE('',#216947,#216980,#216982,.T.); +#216980 = VERTEX_POINT('',#216981); +#216981 = CARTESIAN_POINT('',(128.048578,-67.3,1.545)); +#216982 = LINE('',#216983,#216984); +#216983 = CARTESIAN_POINT('',(127.380491,-67.301921,1.545)); +#216984 = VECTOR('',#216985,1.); +#216985 = DIRECTION('',(0.999995866138,2.875362129253E-03,0.)); +#216986 = ORIENTED_EDGE('',*,*,#216987,.F.); +#216987 = EDGE_CURVE('',#216988,#216980,#216990,.T.); +#216988 = VERTEX_POINT('',#216989); +#216989 = CARTESIAN_POINT('',(128.048578,-67.3,1.51)); +#216990 = LINE('',#216991,#216992); +#216991 = CARTESIAN_POINT('',(128.048578,-67.3,1.51)); +#216992 = VECTOR('',#216993,1.); +#216993 = DIRECTION('',(0.,0.,1.)); +#216994 = ORIENTED_EDGE('',*,*,#216995,.F.); +#216995 = EDGE_CURVE('',#216956,#216988,#216996,.T.); +#216996 = LINE('',#216997,#216998); +#216997 = CARTESIAN_POINT('',(127.380491,-67.301921,1.51)); +#216998 = VECTOR('',#216999,1.); +#216999 = DIRECTION('',(0.999995866138,2.875362129253E-03,0.)); +#217000 = PLANE('',#217001); +#217001 = AXIS2_PLACEMENT_3D('',#217002,#217003,#217004); +#217002 = CARTESIAN_POINT('',(127.380491,-67.301921,1.51)); +#217003 = DIRECTION('',(-2.875362129253E-03,0.999995866138,0.)); +#217004 = DIRECTION('',(0.999995866138,2.875362129253E-03,0.)); +#217005 = ADVANCED_FACE('',(#217006),#217022,.T.); +#217006 = FACE_BOUND('',#217007,.T.); +#217007 = EDGE_LOOP('',(#217008,#217009,#217015,#217016)); +#217008 = ORIENTED_EDGE('',*,*,#216987,.T.); +#217009 = ORIENTED_EDGE('',*,*,#217010,.T.); +#217010 = EDGE_CURVE('',#216980,#216720,#217011,.T.); +#217011 = LINE('',#217012,#217013); +#217012 = CARTESIAN_POINT('',(128.048578,-67.3,1.545)); +#217013 = VECTOR('',#217014,1.); +#217014 = DIRECTION('',(0.71202990803,0.702149136631,0.)); +#217015 = ORIENTED_EDGE('',*,*,#216717,.F.); +#217016 = ORIENTED_EDGE('',*,*,#217017,.F.); +#217017 = EDGE_CURVE('',#216988,#216718,#217018,.T.); +#217018 = LINE('',#217019,#217020); +#217019 = CARTESIAN_POINT('',(128.048578,-67.3,1.51)); +#217020 = VECTOR('',#217021,1.); +#217021 = DIRECTION('',(0.71202990803,0.702149136631,0.)); +#217022 = PLANE('',#217023); +#217023 = AXIS2_PLACEMENT_3D('',#217024,#217025,#217026); +#217024 = CARTESIAN_POINT('',(128.048578,-67.3,1.51)); +#217025 = DIRECTION('',(-0.702149136631,0.71202990803,0.)); +#217026 = DIRECTION('',(0.71202990803,0.702149136631,0.)); +#217027 = ADVANCED_FACE('',(#217028),#217040,.F.); +#217028 = FACE_BOUND('',#217029,.T.); +#217029 = EDGE_LOOP('',(#217030,#217031,#217032,#217033,#217034,#217035, + #217036,#217037,#217038,#217039)); +#217030 = ORIENTED_EDGE('',*,*,#216743,.T.); +#217031 = ORIENTED_EDGE('',*,*,#216774,.T.); +#217032 = ORIENTED_EDGE('',*,*,#216806,.T.); +#217033 = ORIENTED_EDGE('',*,*,#216838,.T.); +#217034 = ORIENTED_EDGE('',*,*,#216869,.T.); +#217035 = ORIENTED_EDGE('',*,*,#216900,.T.); +#217036 = ORIENTED_EDGE('',*,*,#216931,.T.); +#217037 = ORIENTED_EDGE('',*,*,#216963,.T.); +#217038 = ORIENTED_EDGE('',*,*,#216995,.T.); +#217039 = ORIENTED_EDGE('',*,*,#217017,.T.); +#217040 = PLANE('',#217041); +#217041 = AXIS2_PLACEMENT_3D('',#217042,#217043,#217044); +#217042 = CARTESIAN_POINT('',(0.,0.,1.51)); +#217043 = DIRECTION('',(0.,0.,1.)); +#217044 = DIRECTION('',(1.,0.,-0.)); +#217045 = ADVANCED_FACE('',(#217046),#217058,.T.); +#217046 = FACE_BOUND('',#217047,.F.); +#217047 = EDGE_LOOP('',(#217048,#217049,#217050,#217051,#217052,#217053, + #217054,#217055,#217056,#217057)); +#217048 = ORIENTED_EDGE('',*,*,#216727,.T.); +#217049 = ORIENTED_EDGE('',*,*,#216758,.T.); +#217050 = ORIENTED_EDGE('',*,*,#216789,.T.); +#217051 = ORIENTED_EDGE('',*,*,#216822,.T.); +#217052 = ORIENTED_EDGE('',*,*,#216853,.T.); +#217053 = ORIENTED_EDGE('',*,*,#216884,.T.); +#217054 = ORIENTED_EDGE('',*,*,#216915,.T.); +#217055 = ORIENTED_EDGE('',*,*,#216946,.T.); +#217056 = ORIENTED_EDGE('',*,*,#216979,.T.); +#217057 = ORIENTED_EDGE('',*,*,#217010,.T.); +#217058 = PLANE('',#217059); +#217059 = AXIS2_PLACEMENT_3D('',#217060,#217061,#217062); +#217060 = CARTESIAN_POINT('',(0.,0.,1.545)); +#217061 = DIRECTION('',(0.,0.,1.)); +#217062 = DIRECTION('',(1.,0.,-0.)); +#217063 = MANIFOLD_SOLID_BREP('',#217064); +#217064 = CLOSED_SHELL('',(#217065,#217107,#217138,#217169,#217200, + #217231,#217262,#217295,#217326,#217357,#217388,#217419,#217450, + #217481,#217512,#217543,#217574,#217605,#217627,#217653)); +#217065 = ADVANCED_FACE('',(#217066),#217102,.T.); +#217066 = FACE_BOUND('',#217067,.T.); +#217067 = EDGE_LOOP('',(#217068,#217078,#217087,#217095)); +#217068 = ORIENTED_EDGE('',*,*,#217069,.T.); +#217069 = EDGE_CURVE('',#217070,#217072,#217074,.T.); +#217070 = VERTEX_POINT('',#217071); +#217071 = CARTESIAN_POINT('',(127.719443,-157.216853,1.51)); +#217072 = VERTEX_POINT('',#217073); +#217073 = CARTESIAN_POINT('',(127.719443,-157.216853,1.545)); +#217074 = LINE('',#217075,#217076); +#217075 = CARTESIAN_POINT('',(127.719443,-157.216853,1.51)); +#217076 = VECTOR('',#217077,1.); +#217077 = DIRECTION('',(0.,0.,1.)); +#217078 = ORIENTED_EDGE('',*,*,#217079,.T.); +#217079 = EDGE_CURVE('',#217072,#217080,#217082,.T.); +#217080 = VERTEX_POINT('',#217081); +#217081 = CARTESIAN_POINT('',(127.873079,-157.280491,1.545)); +#217082 = CIRCLE('',#217083,0.100000590676); +#217083 = AXIS2_PLACEMENT_3D('',#217084,#217085,#217086); +#217084 = CARTESIAN_POINT('',(127.775,-157.3000006871,1.545)); +#217085 = DIRECTION('',(0.,0.,-1.)); +#217086 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#217087 = ORIENTED_EDGE('',*,*,#217088,.F.); +#217088 = EDGE_CURVE('',#217089,#217080,#217091,.T.); +#217089 = VERTEX_POINT('',#217090); +#217090 = CARTESIAN_POINT('',(127.873079,-157.280491,1.51)); +#217091 = LINE('',#217092,#217093); +#217092 = CARTESIAN_POINT('',(127.873079,-157.280491,1.51)); +#217093 = VECTOR('',#217094,1.); +#217094 = DIRECTION('',(0.,0.,1.)); +#217095 = ORIENTED_EDGE('',*,*,#217096,.F.); +#217096 = EDGE_CURVE('',#217070,#217089,#217097,.T.); +#217097 = CIRCLE('',#217098,0.100000590676); +#217098 = AXIS2_PLACEMENT_3D('',#217099,#217100,#217101); +#217099 = CARTESIAN_POINT('',(127.775,-157.3000006871,1.51)); +#217100 = DIRECTION('',(0.,0.,-1.)); +#217101 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#217102 = CYLINDRICAL_SURFACE('',#217103,0.100000590676); +#217103 = AXIS2_PLACEMENT_3D('',#217104,#217105,#217106); +#217104 = CARTESIAN_POINT('',(127.775,-157.3000006871,1.51)); +#217105 = DIRECTION('',(0.,0.,-1.)); +#217106 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#217107 = ADVANCED_FACE('',(#217108),#217133,.T.); +#217108 = FACE_BOUND('',#217109,.T.); +#217109 = EDGE_LOOP('',(#217110,#217111,#217119,#217127)); +#217110 = ORIENTED_EDGE('',*,*,#217088,.T.); +#217111 = ORIENTED_EDGE('',*,*,#217112,.T.); +#217112 = EDGE_CURVE('',#217080,#217113,#217115,.T.); +#217113 = VERTEX_POINT('',#217114); +#217114 = CARTESIAN_POINT('',(127.875,-158.158578,1.545)); +#217115 = LINE('',#217116,#217117); +#217116 = CARTESIAN_POINT('',(127.873079,-157.280491,1.545)); +#217117 = VECTOR('',#217118,1.); +#217118 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#217119 = ORIENTED_EDGE('',*,*,#217120,.F.); +#217120 = EDGE_CURVE('',#217121,#217113,#217123,.T.); +#217121 = VERTEX_POINT('',#217122); +#217122 = CARTESIAN_POINT('',(127.875,-158.158578,1.51)); +#217123 = LINE('',#217124,#217125); +#217124 = CARTESIAN_POINT('',(127.875,-158.158578,1.51)); +#217125 = VECTOR('',#217126,1.); +#217126 = DIRECTION('',(0.,0.,1.)); +#217127 = ORIENTED_EDGE('',*,*,#217128,.F.); +#217128 = EDGE_CURVE('',#217089,#217121,#217129,.T.); +#217129 = LINE('',#217130,#217131); +#217130 = CARTESIAN_POINT('',(127.873079,-157.280491,1.51)); +#217131 = VECTOR('',#217132,1.); +#217132 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#217133 = PLANE('',#217134); +#217134 = AXIS2_PLACEMENT_3D('',#217135,#217136,#217137); +#217135 = CARTESIAN_POINT('',(127.873079,-157.280491,1.51)); +#217136 = DIRECTION('',(0.99999760697,2.187705094126E-03,-0.)); +#217137 = DIRECTION('',(2.187705094126E-03,-0.99999760697,0.)); +#217138 = ADVANCED_FACE('',(#217139),#217164,.T.); +#217139 = FACE_BOUND('',#217140,.T.); +#217140 = EDGE_LOOP('',(#217141,#217142,#217150,#217158)); +#217141 = ORIENTED_EDGE('',*,*,#217120,.T.); +#217142 = ORIENTED_EDGE('',*,*,#217143,.T.); +#217143 = EDGE_CURVE('',#217113,#217144,#217146,.T.); +#217144 = VERTEX_POINT('',#217145); +#217145 = CARTESIAN_POINT('',(128.116422,-158.4,1.545)); +#217146 = LINE('',#217147,#217148); +#217147 = CARTESIAN_POINT('',(127.875,-158.158578,1.545)); +#217148 = VECTOR('',#217149,1.); +#217149 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217150 = ORIENTED_EDGE('',*,*,#217151,.F.); +#217151 = EDGE_CURVE('',#217152,#217144,#217154,.T.); +#217152 = VERTEX_POINT('',#217153); +#217153 = CARTESIAN_POINT('',(128.116422,-158.4,1.51)); +#217154 = LINE('',#217155,#217156); +#217155 = CARTESIAN_POINT('',(128.116422,-158.4,1.51)); +#217156 = VECTOR('',#217157,1.); +#217157 = DIRECTION('',(0.,0.,1.)); +#217158 = ORIENTED_EDGE('',*,*,#217159,.F.); +#217159 = EDGE_CURVE('',#217121,#217152,#217160,.T.); +#217160 = LINE('',#217161,#217162); +#217161 = CARTESIAN_POINT('',(127.875,-158.158578,1.51)); +#217162 = VECTOR('',#217163,1.); +#217163 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217164 = PLANE('',#217165); +#217165 = AXIS2_PLACEMENT_3D('',#217166,#217167,#217168); +#217166 = CARTESIAN_POINT('',(127.875,-158.158578,1.51)); +#217167 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#217168 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217169 = ADVANCED_FACE('',(#217170),#217195,.T.); +#217170 = FACE_BOUND('',#217171,.T.); +#217171 = EDGE_LOOP('',(#217172,#217173,#217181,#217189)); +#217172 = ORIENTED_EDGE('',*,*,#217151,.T.); +#217173 = ORIENTED_EDGE('',*,*,#217174,.T.); +#217174 = EDGE_CURVE('',#217144,#217175,#217177,.T.); +#217175 = VERTEX_POINT('',#217176); +#217176 = CARTESIAN_POINT('',(129.883578,-158.4,1.545)); +#217177 = LINE('',#217178,#217179); +#217178 = CARTESIAN_POINT('',(128.116422,-158.4,1.545)); +#217179 = VECTOR('',#217180,1.); +#217180 = DIRECTION('',(1.,0.,0.)); +#217181 = ORIENTED_EDGE('',*,*,#217182,.F.); +#217182 = EDGE_CURVE('',#217183,#217175,#217185,.T.); +#217183 = VERTEX_POINT('',#217184); +#217184 = CARTESIAN_POINT('',(129.883578,-158.4,1.51)); +#217185 = LINE('',#217186,#217187); +#217186 = CARTESIAN_POINT('',(129.883578,-158.4,1.51)); +#217187 = VECTOR('',#217188,1.); +#217188 = DIRECTION('',(0.,0.,1.)); +#217189 = ORIENTED_EDGE('',*,*,#217190,.F.); +#217190 = EDGE_CURVE('',#217152,#217183,#217191,.T.); +#217191 = LINE('',#217192,#217193); +#217192 = CARTESIAN_POINT('',(128.116422,-158.4,1.51)); +#217193 = VECTOR('',#217194,1.); +#217194 = DIRECTION('',(1.,0.,0.)); +#217195 = PLANE('',#217196); +#217196 = AXIS2_PLACEMENT_3D('',#217197,#217198,#217199); +#217197 = CARTESIAN_POINT('',(128.116422,-158.4,1.51)); +#217198 = DIRECTION('',(0.,1.,0.)); +#217199 = DIRECTION('',(1.,0.,0.)); +#217200 = ADVANCED_FACE('',(#217201),#217226,.T.); +#217201 = FACE_BOUND('',#217202,.T.); +#217202 = EDGE_LOOP('',(#217203,#217204,#217212,#217220)); +#217203 = ORIENTED_EDGE('',*,*,#217182,.T.); +#217204 = ORIENTED_EDGE('',*,*,#217205,.T.); +#217205 = EDGE_CURVE('',#217175,#217206,#217208,.T.); +#217206 = VERTEX_POINT('',#217207); +#217207 = CARTESIAN_POINT('',(130.125,-158.158578,1.545)); +#217208 = LINE('',#217209,#217210); +#217209 = CARTESIAN_POINT('',(129.883578,-158.4,1.545)); +#217210 = VECTOR('',#217211,1.); +#217211 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217212 = ORIENTED_EDGE('',*,*,#217213,.F.); +#217213 = EDGE_CURVE('',#217214,#217206,#217216,.T.); +#217214 = VERTEX_POINT('',#217215); +#217215 = CARTESIAN_POINT('',(130.125,-158.158578,1.51)); +#217216 = LINE('',#217217,#217218); +#217217 = CARTESIAN_POINT('',(130.125,-158.158578,1.51)); +#217218 = VECTOR('',#217219,1.); +#217219 = DIRECTION('',(0.,0.,1.)); +#217220 = ORIENTED_EDGE('',*,*,#217221,.F.); +#217221 = EDGE_CURVE('',#217183,#217214,#217222,.T.); +#217222 = LINE('',#217223,#217224); +#217223 = CARTESIAN_POINT('',(129.883578,-158.4,1.51)); +#217224 = VECTOR('',#217225,1.); +#217225 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217226 = PLANE('',#217227); +#217227 = AXIS2_PLACEMENT_3D('',#217228,#217229,#217230); +#217228 = CARTESIAN_POINT('',(129.883578,-158.4,1.51)); +#217229 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217230 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217231 = ADVANCED_FACE('',(#217232),#217257,.T.); +#217232 = FACE_BOUND('',#217233,.T.); +#217233 = EDGE_LOOP('',(#217234,#217235,#217243,#217251)); +#217234 = ORIENTED_EDGE('',*,*,#217213,.T.); +#217235 = ORIENTED_EDGE('',*,*,#217236,.T.); +#217236 = EDGE_CURVE('',#217206,#217237,#217239,.T.); +#217237 = VERTEX_POINT('',#217238); +#217238 = CARTESIAN_POINT('',(130.126921,-157.280491,1.545)); +#217239 = LINE('',#217240,#217241); +#217240 = CARTESIAN_POINT('',(130.125,-158.158578,1.545)); +#217241 = VECTOR('',#217242,1.); +#217242 = DIRECTION('',(2.187705094142E-03,0.99999760697,0.)); +#217243 = ORIENTED_EDGE('',*,*,#217244,.F.); +#217244 = EDGE_CURVE('',#217245,#217237,#217247,.T.); +#217245 = VERTEX_POINT('',#217246); +#217246 = CARTESIAN_POINT('',(130.126921,-157.280491,1.51)); +#217247 = LINE('',#217248,#217249); +#217248 = CARTESIAN_POINT('',(130.126921,-157.280491,1.51)); +#217249 = VECTOR('',#217250,1.); +#217250 = DIRECTION('',(0.,0.,1.)); +#217251 = ORIENTED_EDGE('',*,*,#217252,.F.); +#217252 = EDGE_CURVE('',#217214,#217245,#217253,.T.); +#217253 = LINE('',#217254,#217255); +#217254 = CARTESIAN_POINT('',(130.125,-158.158578,1.51)); +#217255 = VECTOR('',#217256,1.); +#217256 = DIRECTION('',(2.187705094142E-03,0.99999760697,0.)); +#217257 = PLANE('',#217258); +#217258 = AXIS2_PLACEMENT_3D('',#217259,#217260,#217261); +#217259 = CARTESIAN_POINT('',(130.125,-158.158578,1.51)); +#217260 = DIRECTION('',(-0.99999760697,2.187705094142E-03,0.)); +#217261 = DIRECTION('',(2.187705094142E-03,0.99999760697,0.)); +#217262 = ADVANCED_FACE('',(#217263),#217290,.T.); +#217263 = FACE_BOUND('',#217264,.T.); +#217264 = EDGE_LOOP('',(#217265,#217266,#217275,#217283)); +#217265 = ORIENTED_EDGE('',*,*,#217244,.T.); +#217266 = ORIENTED_EDGE('',*,*,#217267,.T.); +#217267 = EDGE_CURVE('',#217237,#217268,#217270,.T.); +#217268 = VERTEX_POINT('',#217269); +#217269 = CARTESIAN_POINT('',(130.323079,-157.280491,1.545)); +#217270 = CIRCLE('',#217271,0.100000456609); +#217271 = AXIS2_PLACEMENT_3D('',#217272,#217273,#217274); +#217272 = CARTESIAN_POINT('',(130.225,-157.3,1.545)); +#217273 = DIRECTION('',(0.,0.,-1.)); +#217274 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#217275 = ORIENTED_EDGE('',*,*,#217276,.F.); +#217276 = EDGE_CURVE('',#217277,#217268,#217279,.T.); +#217277 = VERTEX_POINT('',#217278); +#217278 = CARTESIAN_POINT('',(130.323079,-157.280491,1.51)); +#217279 = LINE('',#217280,#217281); +#217280 = CARTESIAN_POINT('',(130.323079,-157.280491,1.51)); +#217281 = VECTOR('',#217282,1.); +#217282 = DIRECTION('',(0.,0.,1.)); +#217283 = ORIENTED_EDGE('',*,*,#217284,.F.); +#217284 = EDGE_CURVE('',#217245,#217277,#217285,.T.); +#217285 = CIRCLE('',#217286,0.100000456609); +#217286 = AXIS2_PLACEMENT_3D('',#217287,#217288,#217289); +#217287 = CARTESIAN_POINT('',(130.225,-157.3,1.51)); +#217288 = DIRECTION('',(0.,0.,-1.)); +#217289 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#217290 = CYLINDRICAL_SURFACE('',#217291,0.100000456609); +#217291 = AXIS2_PLACEMENT_3D('',#217292,#217293,#217294); +#217292 = CARTESIAN_POINT('',(130.225,-157.3,1.51)); +#217293 = DIRECTION('',(0.,0.,-1.)); +#217294 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#217295 = ADVANCED_FACE('',(#217296),#217321,.T.); +#217296 = FACE_BOUND('',#217297,.T.); +#217297 = EDGE_LOOP('',(#217298,#217299,#217307,#217315)); +#217298 = ORIENTED_EDGE('',*,*,#217276,.T.); +#217299 = ORIENTED_EDGE('',*,*,#217300,.T.); +#217300 = EDGE_CURVE('',#217268,#217301,#217303,.T.); +#217301 = VERTEX_POINT('',#217302); +#217302 = CARTESIAN_POINT('',(130.323079,-158.219509,1.545)); +#217303 = LINE('',#217304,#217305); +#217304 = CARTESIAN_POINT('',(130.323079,-157.280491,1.545)); +#217305 = VECTOR('',#217306,1.); +#217306 = DIRECTION('',(0.,-1.,0.)); +#217307 = ORIENTED_EDGE('',*,*,#217308,.F.); +#217308 = EDGE_CURVE('',#217309,#217301,#217311,.T.); +#217309 = VERTEX_POINT('',#217310); +#217310 = CARTESIAN_POINT('',(130.323079,-158.219509,1.51)); +#217311 = LINE('',#217312,#217313); +#217312 = CARTESIAN_POINT('',(130.323079,-158.219509,1.51)); +#217313 = VECTOR('',#217314,1.); +#217314 = DIRECTION('',(0.,0.,1.)); +#217315 = ORIENTED_EDGE('',*,*,#217316,.F.); +#217316 = EDGE_CURVE('',#217277,#217309,#217317,.T.); +#217317 = LINE('',#217318,#217319); +#217318 = CARTESIAN_POINT('',(130.323079,-157.280491,1.51)); +#217319 = VECTOR('',#217320,1.); +#217320 = DIRECTION('',(0.,-1.,0.)); +#217321 = PLANE('',#217322); +#217322 = AXIS2_PLACEMENT_3D('',#217323,#217324,#217325); +#217323 = CARTESIAN_POINT('',(130.323079,-157.280491,1.51)); +#217324 = DIRECTION('',(1.,0.,-0.)); +#217325 = DIRECTION('',(0.,-1.,0.)); +#217326 = ADVANCED_FACE('',(#217327),#217352,.T.); +#217327 = FACE_BOUND('',#217328,.T.); +#217328 = EDGE_LOOP('',(#217329,#217330,#217338,#217346)); +#217329 = ORIENTED_EDGE('',*,*,#217308,.T.); +#217330 = ORIENTED_EDGE('',*,*,#217331,.T.); +#217331 = EDGE_CURVE('',#217301,#217332,#217334,.T.); +#217332 = VERTEX_POINT('',#217333); +#217333 = CARTESIAN_POINT('',(130.308147,-158.255557,1.545)); +#217334 = LINE('',#217335,#217336); +#217335 = CARTESIAN_POINT('',(130.323079,-158.219509,1.545)); +#217336 = VECTOR('',#217337,1.); +#217337 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#217338 = ORIENTED_EDGE('',*,*,#217339,.F.); +#217339 = EDGE_CURVE('',#217340,#217332,#217342,.T.); +#217340 = VERTEX_POINT('',#217341); +#217341 = CARTESIAN_POINT('',(130.308147,-158.255557,1.51)); +#217342 = LINE('',#217343,#217344); +#217343 = CARTESIAN_POINT('',(130.308147,-158.255557,1.51)); +#217344 = VECTOR('',#217345,1.); +#217345 = DIRECTION('',(0.,0.,1.)); +#217346 = ORIENTED_EDGE('',*,*,#217347,.F.); +#217347 = EDGE_CURVE('',#217309,#217340,#217348,.T.); +#217348 = LINE('',#217349,#217350); +#217349 = CARTESIAN_POINT('',(130.323079,-158.219509,1.51)); +#217350 = VECTOR('',#217351,1.); +#217351 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#217352 = PLANE('',#217353); +#217353 = AXIS2_PLACEMENT_3D('',#217354,#217355,#217356); +#217354 = CARTESIAN_POINT('',(130.323079,-158.219509,1.51)); +#217355 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#217356 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#217357 = ADVANCED_FACE('',(#217358),#217383,.T.); +#217358 = FACE_BOUND('',#217359,.T.); +#217359 = EDGE_LOOP('',(#217360,#217361,#217369,#217377)); +#217360 = ORIENTED_EDGE('',*,*,#217339,.T.); +#217361 = ORIENTED_EDGE('',*,*,#217362,.T.); +#217362 = EDGE_CURVE('',#217332,#217363,#217365,.T.); +#217363 = VERTEX_POINT('',#217364); +#217364 = CARTESIAN_POINT('',(129.980557,-158.583147,1.545)); +#217365 = LINE('',#217366,#217367); +#217366 = CARTESIAN_POINT('',(130.308147,-158.255557,1.545)); +#217367 = VECTOR('',#217368,1.); +#217368 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#217369 = ORIENTED_EDGE('',*,*,#217370,.F.); +#217370 = EDGE_CURVE('',#217371,#217363,#217373,.T.); +#217371 = VERTEX_POINT('',#217372); +#217372 = CARTESIAN_POINT('',(129.980557,-158.583147,1.51)); +#217373 = LINE('',#217374,#217375); +#217374 = CARTESIAN_POINT('',(129.980557,-158.583147,1.51)); +#217375 = VECTOR('',#217376,1.); +#217376 = DIRECTION('',(0.,0.,1.)); +#217377 = ORIENTED_EDGE('',*,*,#217378,.F.); +#217378 = EDGE_CURVE('',#217340,#217371,#217379,.T.); +#217379 = LINE('',#217380,#217381); +#217380 = CARTESIAN_POINT('',(130.308147,-158.255557,1.51)); +#217381 = VECTOR('',#217382,1.); +#217382 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#217383 = PLANE('',#217384); +#217384 = AXIS2_PLACEMENT_3D('',#217385,#217386,#217387); +#217385 = CARTESIAN_POINT('',(130.308147,-158.255557,1.51)); +#217386 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217387 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#217388 = ADVANCED_FACE('',(#217389),#217414,.T.); +#217389 = FACE_BOUND('',#217390,.T.); +#217390 = EDGE_LOOP('',(#217391,#217392,#217400,#217408)); +#217391 = ORIENTED_EDGE('',*,*,#217370,.T.); +#217392 = ORIENTED_EDGE('',*,*,#217393,.T.); +#217393 = EDGE_CURVE('',#217363,#217394,#217396,.T.); +#217394 = VERTEX_POINT('',#217395); +#217395 = CARTESIAN_POINT('',(129.944509,-158.598079,1.545)); +#217396 = LINE('',#217397,#217398); +#217397 = CARTESIAN_POINT('',(129.980557,-158.583147,1.545)); +#217398 = VECTOR('',#217399,1.); +#217399 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#217400 = ORIENTED_EDGE('',*,*,#217401,.F.); +#217401 = EDGE_CURVE('',#217402,#217394,#217404,.T.); +#217402 = VERTEX_POINT('',#217403); +#217403 = CARTESIAN_POINT('',(129.944509,-158.598079,1.51)); +#217404 = LINE('',#217405,#217406); +#217405 = CARTESIAN_POINT('',(129.944509,-158.598079,1.51)); +#217406 = VECTOR('',#217407,1.); +#217407 = DIRECTION('',(0.,0.,1.)); +#217408 = ORIENTED_EDGE('',*,*,#217409,.F.); +#217409 = EDGE_CURVE('',#217371,#217402,#217410,.T.); +#217410 = LINE('',#217411,#217412); +#217411 = CARTESIAN_POINT('',(129.980557,-158.583147,1.51)); +#217412 = VECTOR('',#217413,1.); +#217413 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#217414 = PLANE('',#217415); +#217415 = AXIS2_PLACEMENT_3D('',#217416,#217417,#217418); +#217416 = CARTESIAN_POINT('',(129.980557,-158.583147,1.51)); +#217417 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217418 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#217419 = ADVANCED_FACE('',(#217420),#217445,.T.); +#217420 = FACE_BOUND('',#217421,.T.); +#217421 = EDGE_LOOP('',(#217422,#217423,#217431,#217439)); +#217422 = ORIENTED_EDGE('',*,*,#217401,.T.); +#217423 = ORIENTED_EDGE('',*,*,#217424,.T.); +#217424 = EDGE_CURVE('',#217394,#217425,#217427,.T.); +#217425 = VERTEX_POINT('',#217426); +#217426 = CARTESIAN_POINT('',(128.055491,-158.598079,1.545)); +#217427 = LINE('',#217428,#217429); +#217428 = CARTESIAN_POINT('',(129.944509,-158.598079,1.545)); +#217429 = VECTOR('',#217430,1.); +#217430 = DIRECTION('',(-1.,0.,0.)); +#217431 = ORIENTED_EDGE('',*,*,#217432,.F.); +#217432 = EDGE_CURVE('',#217433,#217425,#217435,.T.); +#217433 = VERTEX_POINT('',#217434); +#217434 = CARTESIAN_POINT('',(128.055491,-158.598079,1.51)); +#217435 = LINE('',#217436,#217437); +#217436 = CARTESIAN_POINT('',(128.055491,-158.598079,1.51)); +#217437 = VECTOR('',#217438,1.); +#217438 = DIRECTION('',(0.,0.,1.)); +#217439 = ORIENTED_EDGE('',*,*,#217440,.F.); +#217440 = EDGE_CURVE('',#217402,#217433,#217441,.T.); +#217441 = LINE('',#217442,#217443); +#217442 = CARTESIAN_POINT('',(129.944509,-158.598079,1.51)); +#217443 = VECTOR('',#217444,1.); +#217444 = DIRECTION('',(-1.,0.,0.)); +#217445 = PLANE('',#217446); +#217446 = AXIS2_PLACEMENT_3D('',#217447,#217448,#217449); +#217447 = CARTESIAN_POINT('',(129.944509,-158.598079,1.51)); +#217448 = DIRECTION('',(0.,-1.,0.)); +#217449 = DIRECTION('',(-1.,0.,0.)); +#217450 = ADVANCED_FACE('',(#217451),#217476,.T.); +#217451 = FACE_BOUND('',#217452,.T.); +#217452 = EDGE_LOOP('',(#217453,#217454,#217462,#217470)); +#217453 = ORIENTED_EDGE('',*,*,#217432,.T.); +#217454 = ORIENTED_EDGE('',*,*,#217455,.T.); +#217455 = EDGE_CURVE('',#217425,#217456,#217458,.T.); +#217456 = VERTEX_POINT('',#217457); +#217457 = CARTESIAN_POINT('',(128.019443,-158.583147,1.545)); +#217458 = LINE('',#217459,#217460); +#217459 = CARTESIAN_POINT('',(128.055491,-158.598079,1.545)); +#217460 = VECTOR('',#217461,1.); +#217461 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#217462 = ORIENTED_EDGE('',*,*,#217463,.F.); +#217463 = EDGE_CURVE('',#217464,#217456,#217466,.T.); +#217464 = VERTEX_POINT('',#217465); +#217465 = CARTESIAN_POINT('',(128.019443,-158.583147,1.51)); +#217466 = LINE('',#217467,#217468); +#217467 = CARTESIAN_POINT('',(128.019443,-158.583147,1.51)); +#217468 = VECTOR('',#217469,1.); +#217469 = DIRECTION('',(0.,0.,1.)); +#217470 = ORIENTED_EDGE('',*,*,#217471,.F.); +#217471 = EDGE_CURVE('',#217433,#217464,#217472,.T.); +#217472 = LINE('',#217473,#217474); +#217473 = CARTESIAN_POINT('',(128.055491,-158.598079,1.51)); +#217474 = VECTOR('',#217475,1.); +#217475 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#217476 = PLANE('',#217477); +#217477 = AXIS2_PLACEMENT_3D('',#217478,#217479,#217480); +#217478 = CARTESIAN_POINT('',(128.055491,-158.598079,1.51)); +#217479 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#217480 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#217481 = ADVANCED_FACE('',(#217482),#217507,.T.); +#217482 = FACE_BOUND('',#217483,.T.); +#217483 = EDGE_LOOP('',(#217484,#217485,#217493,#217501)); +#217484 = ORIENTED_EDGE('',*,*,#217463,.T.); +#217485 = ORIENTED_EDGE('',*,*,#217486,.T.); +#217486 = EDGE_CURVE('',#217456,#217487,#217489,.T.); +#217487 = VERTEX_POINT('',#217488); +#217488 = CARTESIAN_POINT('',(127.691853,-158.255557,1.545)); +#217489 = LINE('',#217490,#217491); +#217490 = CARTESIAN_POINT('',(128.019443,-158.583147,1.545)); +#217491 = VECTOR('',#217492,1.); +#217492 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217493 = ORIENTED_EDGE('',*,*,#217494,.F.); +#217494 = EDGE_CURVE('',#217495,#217487,#217497,.T.); +#217495 = VERTEX_POINT('',#217496); +#217496 = CARTESIAN_POINT('',(127.691853,-158.255557,1.51)); +#217497 = LINE('',#217498,#217499); +#217498 = CARTESIAN_POINT('',(127.691853,-158.255557,1.51)); +#217499 = VECTOR('',#217500,1.); +#217500 = DIRECTION('',(0.,0.,1.)); +#217501 = ORIENTED_EDGE('',*,*,#217502,.F.); +#217502 = EDGE_CURVE('',#217464,#217495,#217503,.T.); +#217503 = LINE('',#217504,#217505); +#217504 = CARTESIAN_POINT('',(128.019443,-158.583147,1.51)); +#217505 = VECTOR('',#217506,1.); +#217506 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217507 = PLANE('',#217508); +#217508 = AXIS2_PLACEMENT_3D('',#217509,#217510,#217511); +#217509 = CARTESIAN_POINT('',(128.019443,-158.583147,1.51)); +#217510 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#217511 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217512 = ADVANCED_FACE('',(#217513),#217538,.T.); +#217513 = FACE_BOUND('',#217514,.T.); +#217514 = EDGE_LOOP('',(#217515,#217516,#217524,#217532)); +#217515 = ORIENTED_EDGE('',*,*,#217494,.T.); +#217516 = ORIENTED_EDGE('',*,*,#217517,.T.); +#217517 = EDGE_CURVE('',#217487,#217518,#217520,.T.); +#217518 = VERTEX_POINT('',#217519); +#217519 = CARTESIAN_POINT('',(127.676921,-158.219509,1.545)); +#217520 = LINE('',#217521,#217522); +#217521 = CARTESIAN_POINT('',(127.691853,-158.255557,1.545)); +#217522 = VECTOR('',#217523,1.); +#217523 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#217524 = ORIENTED_EDGE('',*,*,#217525,.F.); +#217525 = EDGE_CURVE('',#217526,#217518,#217528,.T.); +#217526 = VERTEX_POINT('',#217527); +#217527 = CARTESIAN_POINT('',(127.676921,-158.219509,1.51)); +#217528 = LINE('',#217529,#217530); +#217529 = CARTESIAN_POINT('',(127.676921,-158.219509,1.51)); +#217530 = VECTOR('',#217531,1.); +#217531 = DIRECTION('',(0.,0.,1.)); +#217532 = ORIENTED_EDGE('',*,*,#217533,.F.); +#217533 = EDGE_CURVE('',#217495,#217526,#217534,.T.); +#217534 = LINE('',#217535,#217536); +#217535 = CARTESIAN_POINT('',(127.691853,-158.255557,1.51)); +#217536 = VECTOR('',#217537,1.); +#217537 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#217538 = PLANE('',#217539); +#217539 = AXIS2_PLACEMENT_3D('',#217540,#217541,#217542); +#217540 = CARTESIAN_POINT('',(127.691853,-158.255557,1.51)); +#217541 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#217542 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#217543 = ADVANCED_FACE('',(#217544),#217569,.T.); +#217544 = FACE_BOUND('',#217545,.T.); +#217545 = EDGE_LOOP('',(#217546,#217547,#217555,#217563)); +#217546 = ORIENTED_EDGE('',*,*,#217525,.T.); +#217547 = ORIENTED_EDGE('',*,*,#217548,.T.); +#217548 = EDGE_CURVE('',#217518,#217549,#217551,.T.); +#217549 = VERTEX_POINT('',#217550); +#217550 = CARTESIAN_POINT('',(127.676921,-157.280491,1.545)); +#217551 = LINE('',#217552,#217553); +#217552 = CARTESIAN_POINT('',(127.676921,-158.219509,1.545)); +#217553 = VECTOR('',#217554,1.); +#217554 = DIRECTION('',(0.,1.,0.)); +#217555 = ORIENTED_EDGE('',*,*,#217556,.F.); +#217556 = EDGE_CURVE('',#217557,#217549,#217559,.T.); +#217557 = VERTEX_POINT('',#217558); +#217558 = CARTESIAN_POINT('',(127.676921,-157.280491,1.51)); +#217559 = LINE('',#217560,#217561); +#217560 = CARTESIAN_POINT('',(127.676921,-157.280491,1.51)); +#217561 = VECTOR('',#217562,1.); +#217562 = DIRECTION('',(0.,0.,1.)); +#217563 = ORIENTED_EDGE('',*,*,#217564,.F.); +#217564 = EDGE_CURVE('',#217526,#217557,#217565,.T.); +#217565 = LINE('',#217566,#217567); +#217566 = CARTESIAN_POINT('',(127.676921,-158.219509,1.51)); +#217567 = VECTOR('',#217568,1.); +#217568 = DIRECTION('',(0.,1.,0.)); +#217569 = PLANE('',#217570); +#217570 = AXIS2_PLACEMENT_3D('',#217571,#217572,#217573); +#217571 = CARTESIAN_POINT('',(127.676921,-158.219509,1.51)); +#217572 = DIRECTION('',(-1.,0.,0.)); +#217573 = DIRECTION('',(0.,1.,0.)); +#217574 = ADVANCED_FACE('',(#217575),#217600,.T.); +#217575 = FACE_BOUND('',#217576,.T.); +#217576 = EDGE_LOOP('',(#217577,#217578,#217586,#217594)); +#217577 = ORIENTED_EDGE('',*,*,#217556,.T.); +#217578 = ORIENTED_EDGE('',*,*,#217579,.T.); +#217579 = EDGE_CURVE('',#217549,#217580,#217582,.T.); +#217580 = VERTEX_POINT('',#217581); +#217581 = CARTESIAN_POINT('',(127.691853,-157.244443,1.545)); +#217582 = LINE('',#217583,#217584); +#217583 = CARTESIAN_POINT('',(127.676921,-157.280491,1.545)); +#217584 = VECTOR('',#217585,1.); +#217585 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#217586 = ORIENTED_EDGE('',*,*,#217587,.F.); +#217587 = EDGE_CURVE('',#217588,#217580,#217590,.T.); +#217588 = VERTEX_POINT('',#217589); +#217589 = CARTESIAN_POINT('',(127.691853,-157.244443,1.51)); +#217590 = LINE('',#217591,#217592); +#217591 = CARTESIAN_POINT('',(127.691853,-157.244443,1.51)); +#217592 = VECTOR('',#217593,1.); +#217593 = DIRECTION('',(0.,0.,1.)); +#217594 = ORIENTED_EDGE('',*,*,#217595,.F.); +#217595 = EDGE_CURVE('',#217557,#217588,#217596,.T.); +#217596 = LINE('',#217597,#217598); +#217597 = CARTESIAN_POINT('',(127.676921,-157.280491,1.51)); +#217598 = VECTOR('',#217599,1.); +#217599 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#217600 = PLANE('',#217601); +#217601 = AXIS2_PLACEMENT_3D('',#217602,#217603,#217604); +#217602 = CARTESIAN_POINT('',(127.676921,-157.280491,1.51)); +#217603 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#217604 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#217605 = ADVANCED_FACE('',(#217606),#217622,.T.); +#217606 = FACE_BOUND('',#217607,.T.); +#217607 = EDGE_LOOP('',(#217608,#217609,#217615,#217616)); +#217608 = ORIENTED_EDGE('',*,*,#217587,.T.); +#217609 = ORIENTED_EDGE('',*,*,#217610,.T.); +#217610 = EDGE_CURVE('',#217580,#217072,#217611,.T.); +#217611 = LINE('',#217612,#217613); +#217612 = CARTESIAN_POINT('',(127.691853,-157.244443,1.545)); +#217613 = VECTOR('',#217614,1.); +#217614 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217615 = ORIENTED_EDGE('',*,*,#217069,.F.); +#217616 = ORIENTED_EDGE('',*,*,#217617,.F.); +#217617 = EDGE_CURVE('',#217588,#217070,#217618,.T.); +#217618 = LINE('',#217619,#217620); +#217619 = CARTESIAN_POINT('',(127.691853,-157.244443,1.51)); +#217620 = VECTOR('',#217621,1.); +#217621 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217622 = PLANE('',#217623); +#217623 = AXIS2_PLACEMENT_3D('',#217624,#217625,#217626); +#217624 = CARTESIAN_POINT('',(127.691853,-157.244443,1.51)); +#217625 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#217626 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#217627 = ADVANCED_FACE('',(#217628),#217648,.F.); +#217628 = FACE_BOUND('',#217629,.T.); +#217629 = EDGE_LOOP('',(#217630,#217631,#217632,#217633,#217634,#217635, + #217636,#217637,#217638,#217639,#217640,#217641,#217642,#217643, + #217644,#217645,#217646,#217647)); +#217630 = ORIENTED_EDGE('',*,*,#217096,.T.); +#217631 = ORIENTED_EDGE('',*,*,#217128,.T.); +#217632 = ORIENTED_EDGE('',*,*,#217159,.T.); +#217633 = ORIENTED_EDGE('',*,*,#217190,.T.); +#217634 = ORIENTED_EDGE('',*,*,#217221,.T.); +#217635 = ORIENTED_EDGE('',*,*,#217252,.T.); +#217636 = ORIENTED_EDGE('',*,*,#217284,.T.); +#217637 = ORIENTED_EDGE('',*,*,#217316,.T.); +#217638 = ORIENTED_EDGE('',*,*,#217347,.T.); +#217639 = ORIENTED_EDGE('',*,*,#217378,.T.); +#217640 = ORIENTED_EDGE('',*,*,#217409,.T.); +#217641 = ORIENTED_EDGE('',*,*,#217440,.T.); +#217642 = ORIENTED_EDGE('',*,*,#217471,.T.); +#217643 = ORIENTED_EDGE('',*,*,#217502,.T.); +#217644 = ORIENTED_EDGE('',*,*,#217533,.T.); +#217645 = ORIENTED_EDGE('',*,*,#217564,.T.); +#217646 = ORIENTED_EDGE('',*,*,#217595,.T.); +#217647 = ORIENTED_EDGE('',*,*,#217617,.T.); +#217648 = PLANE('',#217649); +#217649 = AXIS2_PLACEMENT_3D('',#217650,#217651,#217652); +#217650 = CARTESIAN_POINT('',(0.,0.,1.51)); +#217651 = DIRECTION('',(0.,0.,1.)); +#217652 = DIRECTION('',(1.,0.,-0.)); +#217653 = ADVANCED_FACE('',(#217654),#217674,.T.); +#217654 = FACE_BOUND('',#217655,.F.); +#217655 = EDGE_LOOP('',(#217656,#217657,#217658,#217659,#217660,#217661, + #217662,#217663,#217664,#217665,#217666,#217667,#217668,#217669, + #217670,#217671,#217672,#217673)); +#217656 = ORIENTED_EDGE('',*,*,#217079,.T.); +#217657 = ORIENTED_EDGE('',*,*,#217112,.T.); +#217658 = ORIENTED_EDGE('',*,*,#217143,.T.); +#217659 = ORIENTED_EDGE('',*,*,#217174,.T.); +#217660 = ORIENTED_EDGE('',*,*,#217205,.T.); +#217661 = ORIENTED_EDGE('',*,*,#217236,.T.); +#217662 = ORIENTED_EDGE('',*,*,#217267,.T.); +#217663 = ORIENTED_EDGE('',*,*,#217300,.T.); +#217664 = ORIENTED_EDGE('',*,*,#217331,.T.); +#217665 = ORIENTED_EDGE('',*,*,#217362,.T.); +#217666 = ORIENTED_EDGE('',*,*,#217393,.T.); +#217667 = ORIENTED_EDGE('',*,*,#217424,.T.); +#217668 = ORIENTED_EDGE('',*,*,#217455,.T.); +#217669 = ORIENTED_EDGE('',*,*,#217486,.T.); +#217670 = ORIENTED_EDGE('',*,*,#217517,.T.); +#217671 = ORIENTED_EDGE('',*,*,#217548,.T.); +#217672 = ORIENTED_EDGE('',*,*,#217579,.T.); +#217673 = ORIENTED_EDGE('',*,*,#217610,.T.); +#217674 = PLANE('',#217675); +#217675 = AXIS2_PLACEMENT_3D('',#217676,#217677,#217678); +#217676 = CARTESIAN_POINT('',(0.,0.,1.545)); +#217677 = DIRECTION('',(0.,0.,1.)); +#217678 = DIRECTION('',(1.,0.,-0.)); +#217679 = MANIFOLD_SOLID_BREP('',#217680); +#217680 = CLOSED_SHELL('',(#217681,#217721,#217752,#217783,#217814, + #217845,#217876,#217907,#217940,#217971,#218002,#218033,#218066, + #218097,#218128,#218159,#218190,#218221,#218252,#218283,#218316, + #218338,#218371,#218403)); +#217681 = ADVANCED_FACE('',(#217682),#217716,.T.); +#217682 = FACE_BOUND('',#217683,.T.); +#217683 = EDGE_LOOP('',(#217684,#217694,#217702,#217710)); +#217684 = ORIENTED_EDGE('',*,*,#217685,.T.); +#217685 = EDGE_CURVE('',#217686,#217688,#217690,.T.); +#217686 = VERTEX_POINT('',#217687); +#217687 = CARTESIAN_POINT('',(125.407179,-152.88113,1.51)); +#217688 = VERTEX_POINT('',#217689); +#217689 = CARTESIAN_POINT('',(125.407179,-152.88113,1.545)); +#217690 = LINE('',#217691,#217692); +#217691 = CARTESIAN_POINT('',(125.407179,-152.88113,1.51)); +#217692 = VECTOR('',#217693,1.); +#217693 = DIRECTION('',(0.,0.,1.)); +#217694 = ORIENTED_EDGE('',*,*,#217695,.T.); +#217695 = EDGE_CURVE('',#217688,#217696,#217698,.T.); +#217696 = VERTEX_POINT('',#217697); +#217697 = CARTESIAN_POINT('',(125.407179,-153.765757,1.545)); +#217698 = LINE('',#217699,#217700); +#217699 = CARTESIAN_POINT('',(125.407179,-152.88113,1.545)); +#217700 = VECTOR('',#217701,1.); +#217701 = DIRECTION('',(0.,-1.,0.)); +#217702 = ORIENTED_EDGE('',*,*,#217703,.F.); +#217703 = EDGE_CURVE('',#217704,#217696,#217706,.T.); +#217704 = VERTEX_POINT('',#217705); +#217705 = CARTESIAN_POINT('',(125.407179,-153.765757,1.51)); +#217706 = LINE('',#217707,#217708); +#217707 = CARTESIAN_POINT('',(125.407179,-153.765757,1.51)); +#217708 = VECTOR('',#217709,1.); +#217709 = DIRECTION('',(0.,0.,1.)); +#217710 = ORIENTED_EDGE('',*,*,#217711,.F.); +#217711 = EDGE_CURVE('',#217686,#217704,#217712,.T.); +#217712 = LINE('',#217713,#217714); +#217713 = CARTESIAN_POINT('',(125.407179,-152.88113,1.51)); +#217714 = VECTOR('',#217715,1.); +#217715 = DIRECTION('',(0.,-1.,0.)); +#217716 = PLANE('',#217717); +#217717 = AXIS2_PLACEMENT_3D('',#217718,#217719,#217720); +#217718 = CARTESIAN_POINT('',(125.407179,-152.88113,1.51)); +#217719 = DIRECTION('',(1.,0.,-0.)); +#217720 = DIRECTION('',(0.,-1.,0.)); +#217721 = ADVANCED_FACE('',(#217722),#217747,.T.); +#217722 = FACE_BOUND('',#217723,.T.); +#217723 = EDGE_LOOP('',(#217724,#217725,#217733,#217741)); +#217724 = ORIENTED_EDGE('',*,*,#217703,.T.); +#217725 = ORIENTED_EDGE('',*,*,#217726,.T.); +#217726 = EDGE_CURVE('',#217696,#217727,#217729,.T.); +#217727 = VERTEX_POINT('',#217728); +#217728 = CARTESIAN_POINT('',(125.808147,-154.169443,1.545)); +#217729 = LINE('',#217730,#217731); +#217730 = CARTESIAN_POINT('',(125.407179,-153.765757,1.545)); +#217731 = VECTOR('',#217732,1.); +#217732 = DIRECTION('',(0.704714260661,-0.709491233787,0.)); +#217733 = ORIENTED_EDGE('',*,*,#217734,.F.); +#217734 = EDGE_CURVE('',#217735,#217727,#217737,.T.); +#217735 = VERTEX_POINT('',#217736); +#217736 = CARTESIAN_POINT('',(125.808147,-154.169443,1.51)); +#217737 = LINE('',#217738,#217739); +#217738 = CARTESIAN_POINT('',(125.808147,-154.169443,1.51)); +#217739 = VECTOR('',#217740,1.); +#217740 = DIRECTION('',(0.,0.,1.)); +#217741 = ORIENTED_EDGE('',*,*,#217742,.F.); +#217742 = EDGE_CURVE('',#217704,#217735,#217743,.T.); +#217743 = LINE('',#217744,#217745); +#217744 = CARTESIAN_POINT('',(125.407179,-153.765757,1.51)); +#217745 = VECTOR('',#217746,1.); +#217746 = DIRECTION('',(0.704714260661,-0.709491233787,0.)); +#217747 = PLANE('',#217748); +#217748 = AXIS2_PLACEMENT_3D('',#217749,#217750,#217751); +#217749 = CARTESIAN_POINT('',(125.407179,-153.765757,1.51)); +#217750 = DIRECTION('',(0.709491233787,0.704714260661,-0.)); +#217751 = DIRECTION('',(0.704714260661,-0.709491233787,0.)); +#217752 = ADVANCED_FACE('',(#217753),#217778,.T.); +#217753 = FACE_BOUND('',#217754,.T.); +#217754 = EDGE_LOOP('',(#217755,#217756,#217764,#217772)); +#217755 = ORIENTED_EDGE('',*,*,#217734,.T.); +#217756 = ORIENTED_EDGE('',*,*,#217757,.T.); +#217757 = EDGE_CURVE('',#217727,#217758,#217760,.T.); +#217758 = VERTEX_POINT('',#217759); +#217759 = CARTESIAN_POINT('',(125.823079,-154.205491,1.545)); +#217760 = LINE('',#217761,#217762); +#217761 = CARTESIAN_POINT('',(125.808147,-154.169443,1.545)); +#217762 = VECTOR('',#217763,1.); +#217763 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217764 = ORIENTED_EDGE('',*,*,#217765,.F.); +#217765 = EDGE_CURVE('',#217766,#217758,#217768,.T.); +#217766 = VERTEX_POINT('',#217767); +#217767 = CARTESIAN_POINT('',(125.823079,-154.205491,1.51)); +#217768 = LINE('',#217769,#217770); +#217769 = CARTESIAN_POINT('',(125.823079,-154.205491,1.51)); +#217770 = VECTOR('',#217771,1.); +#217771 = DIRECTION('',(0.,0.,1.)); +#217772 = ORIENTED_EDGE('',*,*,#217773,.F.); +#217773 = EDGE_CURVE('',#217735,#217766,#217774,.T.); +#217774 = LINE('',#217775,#217776); +#217775 = CARTESIAN_POINT('',(125.808147,-154.169443,1.51)); +#217776 = VECTOR('',#217777,1.); +#217777 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217778 = PLANE('',#217779); +#217779 = AXIS2_PLACEMENT_3D('',#217780,#217781,#217782); +#217780 = CARTESIAN_POINT('',(125.808147,-154.169443,1.51)); +#217781 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#217782 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217783 = ADVANCED_FACE('',(#217784),#217809,.T.); +#217784 = FACE_BOUND('',#217785,.T.); +#217785 = EDGE_LOOP('',(#217786,#217787,#217795,#217803)); +#217786 = ORIENTED_EDGE('',*,*,#217765,.T.); +#217787 = ORIENTED_EDGE('',*,*,#217788,.T.); +#217788 = EDGE_CURVE('',#217758,#217789,#217791,.T.); +#217789 = VERTEX_POINT('',#217790); +#217790 = CARTESIAN_POINT('',(125.825,-154.958578,1.545)); +#217791 = LINE('',#217792,#217793); +#217792 = CARTESIAN_POINT('',(125.823079,-154.205491,1.545)); +#217793 = VECTOR('',#217794,1.); +#217794 = DIRECTION('',(2.550825801386E-03,-0.999996746639,0.)); +#217795 = ORIENTED_EDGE('',*,*,#217796,.F.); +#217796 = EDGE_CURVE('',#217797,#217789,#217799,.T.); +#217797 = VERTEX_POINT('',#217798); +#217798 = CARTESIAN_POINT('',(125.825,-154.958578,1.51)); +#217799 = LINE('',#217800,#217801); +#217800 = CARTESIAN_POINT('',(125.825,-154.958578,1.51)); +#217801 = VECTOR('',#217802,1.); +#217802 = DIRECTION('',(0.,0.,1.)); +#217803 = ORIENTED_EDGE('',*,*,#217804,.F.); +#217804 = EDGE_CURVE('',#217766,#217797,#217805,.T.); +#217805 = LINE('',#217806,#217807); +#217806 = CARTESIAN_POINT('',(125.823079,-154.205491,1.51)); +#217807 = VECTOR('',#217808,1.); +#217808 = DIRECTION('',(2.550825801386E-03,-0.999996746639,0.)); +#217809 = PLANE('',#217810); +#217810 = AXIS2_PLACEMENT_3D('',#217811,#217812,#217813); +#217811 = CARTESIAN_POINT('',(125.823079,-154.205491,1.51)); +#217812 = DIRECTION('',(0.999996746639,2.550825801386E-03,-0.)); +#217813 = DIRECTION('',(2.550825801386E-03,-0.999996746639,0.)); +#217814 = ADVANCED_FACE('',(#217815),#217840,.T.); +#217815 = FACE_BOUND('',#217816,.T.); +#217816 = EDGE_LOOP('',(#217817,#217818,#217826,#217834)); +#217817 = ORIENTED_EDGE('',*,*,#217796,.T.); +#217818 = ORIENTED_EDGE('',*,*,#217819,.T.); +#217819 = EDGE_CURVE('',#217789,#217820,#217822,.T.); +#217820 = VERTEX_POINT('',#217821); +#217821 = CARTESIAN_POINT('',(127.675,-156.808578,1.545)); +#217822 = LINE('',#217823,#217824); +#217823 = CARTESIAN_POINT('',(125.825,-154.958578,1.545)); +#217824 = VECTOR('',#217825,1.); +#217825 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217826 = ORIENTED_EDGE('',*,*,#217827,.F.); +#217827 = EDGE_CURVE('',#217828,#217820,#217830,.T.); +#217828 = VERTEX_POINT('',#217829); +#217829 = CARTESIAN_POINT('',(127.675,-156.808578,1.51)); +#217830 = LINE('',#217831,#217832); +#217831 = CARTESIAN_POINT('',(127.675,-156.808578,1.51)); +#217832 = VECTOR('',#217833,1.); +#217833 = DIRECTION('',(0.,0.,1.)); +#217834 = ORIENTED_EDGE('',*,*,#217835,.F.); +#217835 = EDGE_CURVE('',#217797,#217828,#217836,.T.); +#217836 = LINE('',#217837,#217838); +#217837 = CARTESIAN_POINT('',(125.825,-154.958578,1.51)); +#217838 = VECTOR('',#217839,1.); +#217839 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217840 = PLANE('',#217841); +#217841 = AXIS2_PLACEMENT_3D('',#217842,#217843,#217844); +#217842 = CARTESIAN_POINT('',(125.825,-154.958578,1.51)); +#217843 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#217844 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217845 = ADVANCED_FACE('',(#217846),#217871,.T.); +#217846 = FACE_BOUND('',#217847,.T.); +#217847 = EDGE_LOOP('',(#217848,#217849,#217857,#217865)); +#217848 = ORIENTED_EDGE('',*,*,#217827,.T.); +#217849 = ORIENTED_EDGE('',*,*,#217850,.T.); +#217850 = EDGE_CURVE('',#217820,#217851,#217853,.T.); +#217851 = VERTEX_POINT('',#217852); +#217852 = CARTESIAN_POINT('',(127.675,-155.796421,1.545)); +#217853 = LINE('',#217854,#217855); +#217854 = CARTESIAN_POINT('',(127.675,-156.808578,1.545)); +#217855 = VECTOR('',#217856,1.); +#217856 = DIRECTION('',(0.,1.,0.)); +#217857 = ORIENTED_EDGE('',*,*,#217858,.F.); +#217858 = EDGE_CURVE('',#217859,#217851,#217861,.T.); +#217859 = VERTEX_POINT('',#217860); +#217860 = CARTESIAN_POINT('',(127.675,-155.796421,1.51)); +#217861 = LINE('',#217862,#217863); +#217862 = CARTESIAN_POINT('',(127.675,-155.796421,1.51)); +#217863 = VECTOR('',#217864,1.); +#217864 = DIRECTION('',(0.,0.,1.)); +#217865 = ORIENTED_EDGE('',*,*,#217866,.F.); +#217866 = EDGE_CURVE('',#217828,#217859,#217867,.T.); +#217867 = LINE('',#217868,#217869); +#217868 = CARTESIAN_POINT('',(127.675,-156.808578,1.51)); +#217869 = VECTOR('',#217870,1.); +#217870 = DIRECTION('',(0.,1.,0.)); +#217871 = PLANE('',#217872); +#217872 = AXIS2_PLACEMENT_3D('',#217873,#217874,#217875); +#217873 = CARTESIAN_POINT('',(127.675,-156.808578,1.51)); +#217874 = DIRECTION('',(-1.,0.,0.)); +#217875 = DIRECTION('',(0.,1.,0.)); +#217876 = ADVANCED_FACE('',(#217877),#217902,.T.); +#217877 = FACE_BOUND('',#217878,.T.); +#217878 = EDGE_LOOP('',(#217879,#217880,#217888,#217896)); +#217879 = ORIENTED_EDGE('',*,*,#217858,.T.); +#217880 = ORIENTED_EDGE('',*,*,#217881,.T.); +#217881 = EDGE_CURVE('',#217851,#217882,#217884,.T.); +#217882 = VERTEX_POINT('',#217883); +#217883 = CARTESIAN_POINT('',(126.416853,-154.535557,1.545)); +#217884 = LINE('',#217885,#217886); +#217885 = CARTESIAN_POINT('',(127.675,-155.796421,1.545)); +#217886 = VECTOR('',#217887,1.); +#217887 = DIRECTION('',(-0.70634368642,0.707869053325,0.)); +#217888 = ORIENTED_EDGE('',*,*,#217889,.F.); +#217889 = EDGE_CURVE('',#217890,#217882,#217892,.T.); +#217890 = VERTEX_POINT('',#217891); +#217891 = CARTESIAN_POINT('',(126.416853,-154.535557,1.51)); +#217892 = LINE('',#217893,#217894); +#217893 = CARTESIAN_POINT('',(126.416853,-154.535557,1.51)); +#217894 = VECTOR('',#217895,1.); +#217895 = DIRECTION('',(0.,0.,1.)); +#217896 = ORIENTED_EDGE('',*,*,#217897,.F.); +#217897 = EDGE_CURVE('',#217859,#217890,#217898,.T.); +#217898 = LINE('',#217899,#217900); +#217899 = CARTESIAN_POINT('',(127.675,-155.796421,1.51)); +#217900 = VECTOR('',#217901,1.); +#217901 = DIRECTION('',(-0.70634368642,0.707869053325,0.)); +#217902 = PLANE('',#217903); +#217903 = AXIS2_PLACEMENT_3D('',#217904,#217905,#217906); +#217904 = CARTESIAN_POINT('',(127.675,-155.796421,1.51)); +#217905 = DIRECTION('',(-0.707869053325,-0.70634368642,0.)); +#217906 = DIRECTION('',(-0.70634368642,0.707869053325,0.)); +#217907 = ADVANCED_FACE('',(#217908),#217935,.T.); +#217908 = FACE_BOUND('',#217909,.T.); +#217909 = EDGE_LOOP('',(#217910,#217911,#217920,#217928)); +#217910 = ORIENTED_EDGE('',*,*,#217889,.T.); +#217911 = ORIENTED_EDGE('',*,*,#217912,.T.); +#217912 = EDGE_CURVE('',#217882,#217913,#217915,.T.); +#217913 = VERTEX_POINT('',#217914); +#217914 = CARTESIAN_POINT('',(126.555557,-154.396853,1.545)); +#217915 = CIRCLE('',#217916,0.10000001929); +#217916 = AXIS2_PLACEMENT_3D('',#217917,#217918,#217919); +#217917 = CARTESIAN_POINT('',(126.5,-154.48,1.545)); +#217918 = DIRECTION('',(0.,0.,-1.)); +#217919 = DIRECTION('',(-0.83146983961,-0.55556989283,-0.)); +#217920 = ORIENTED_EDGE('',*,*,#217921,.F.); +#217921 = EDGE_CURVE('',#217922,#217913,#217924,.T.); +#217922 = VERTEX_POINT('',#217923); +#217923 = CARTESIAN_POINT('',(126.555557,-154.396853,1.51)); +#217924 = LINE('',#217925,#217926); +#217925 = CARTESIAN_POINT('',(126.555557,-154.396853,1.51)); +#217926 = VECTOR('',#217927,1.); +#217927 = DIRECTION('',(0.,0.,1.)); +#217928 = ORIENTED_EDGE('',*,*,#217929,.F.); +#217929 = EDGE_CURVE('',#217890,#217922,#217930,.T.); +#217930 = CIRCLE('',#217931,0.10000001929); +#217931 = AXIS2_PLACEMENT_3D('',#217932,#217933,#217934); +#217932 = CARTESIAN_POINT('',(126.5,-154.48,1.51)); +#217933 = DIRECTION('',(0.,0.,-1.)); +#217934 = DIRECTION('',(-0.83146983961,-0.55556989283,-0.)); +#217935 = CYLINDRICAL_SURFACE('',#217936,0.10000001929); +#217936 = AXIS2_PLACEMENT_3D('',#217937,#217938,#217939); +#217937 = CARTESIAN_POINT('',(126.5,-154.48,1.51)); +#217938 = DIRECTION('',(0.,0.,-1.)); +#217939 = DIRECTION('',(-0.83146983961,-0.55556989283,-0.)); +#217940 = ADVANCED_FACE('',(#217941),#217966,.T.); +#217941 = FACE_BOUND('',#217942,.T.); +#217942 = EDGE_LOOP('',(#217943,#217944,#217952,#217960)); +#217943 = ORIENTED_EDGE('',*,*,#217921,.T.); +#217944 = ORIENTED_EDGE('',*,*,#217945,.T.); +#217945 = EDGE_CURVE('',#217913,#217946,#217948,.T.); +#217946 = VERTEX_POINT('',#217947); +#217947 = CARTESIAN_POINT('',(127.858147,-155.699443,1.545)); +#217948 = LINE('',#217949,#217950); +#217949 = CARTESIAN_POINT('',(126.555557,-154.396853,1.545)); +#217950 = VECTOR('',#217951,1.); +#217951 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217952 = ORIENTED_EDGE('',*,*,#217953,.F.); +#217953 = EDGE_CURVE('',#217954,#217946,#217956,.T.); +#217954 = VERTEX_POINT('',#217955); +#217955 = CARTESIAN_POINT('',(127.858147,-155.699443,1.51)); +#217956 = LINE('',#217957,#217958); +#217957 = CARTESIAN_POINT('',(127.858147,-155.699443,1.51)); +#217958 = VECTOR('',#217959,1.); +#217959 = DIRECTION('',(0.,0.,1.)); +#217960 = ORIENTED_EDGE('',*,*,#217961,.F.); +#217961 = EDGE_CURVE('',#217922,#217954,#217962,.T.); +#217962 = LINE('',#217963,#217964); +#217963 = CARTESIAN_POINT('',(126.555557,-154.396853,1.51)); +#217964 = VECTOR('',#217965,1.); +#217965 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217966 = PLANE('',#217967); +#217967 = AXIS2_PLACEMENT_3D('',#217968,#217969,#217970); +#217968 = CARTESIAN_POINT('',(126.555557,-154.396853,1.51)); +#217969 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#217970 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#217971 = ADVANCED_FACE('',(#217972),#217997,.T.); +#217972 = FACE_BOUND('',#217973,.T.); +#217973 = EDGE_LOOP('',(#217974,#217975,#217983,#217991)); +#217974 = ORIENTED_EDGE('',*,*,#217953,.T.); +#217975 = ORIENTED_EDGE('',*,*,#217976,.T.); +#217976 = EDGE_CURVE('',#217946,#217977,#217979,.T.); +#217977 = VERTEX_POINT('',#217978); +#217978 = CARTESIAN_POINT('',(127.873079,-155.735491,1.545)); +#217979 = LINE('',#217980,#217981); +#217980 = CARTESIAN_POINT('',(127.858147,-155.699443,1.545)); +#217981 = VECTOR('',#217982,1.); +#217982 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217983 = ORIENTED_EDGE('',*,*,#217984,.F.); +#217984 = EDGE_CURVE('',#217985,#217977,#217987,.T.); +#217985 = VERTEX_POINT('',#217986); +#217986 = CARTESIAN_POINT('',(127.873079,-155.735491,1.51)); +#217987 = LINE('',#217988,#217989); +#217988 = CARTESIAN_POINT('',(127.873079,-155.735491,1.51)); +#217989 = VECTOR('',#217990,1.); +#217990 = DIRECTION('',(0.,0.,1.)); +#217991 = ORIENTED_EDGE('',*,*,#217992,.F.); +#217992 = EDGE_CURVE('',#217954,#217985,#217993,.T.); +#217993 = LINE('',#217994,#217995); +#217994 = CARTESIAN_POINT('',(127.858147,-155.699443,1.51)); +#217995 = VECTOR('',#217996,1.); +#217996 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#217997 = PLANE('',#217998); +#217998 = AXIS2_PLACEMENT_3D('',#217999,#218000,#218001); +#217999 = CARTESIAN_POINT('',(127.858147,-155.699443,1.51)); +#218000 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#218001 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218002 = ADVANCED_FACE('',(#218003),#218028,.T.); +#218003 = FACE_BOUND('',#218004,.T.); +#218004 = EDGE_LOOP('',(#218005,#218006,#218014,#218022)); +#218005 = ORIENTED_EDGE('',*,*,#217984,.T.); +#218006 = ORIENTED_EDGE('',*,*,#218007,.T.); +#218007 = EDGE_CURVE('',#217977,#218008,#218010,.T.); +#218008 = VERTEX_POINT('',#218009); +#218009 = CARTESIAN_POINT('',(127.873079,-157.069509,1.545)); +#218010 = LINE('',#218011,#218012); +#218011 = CARTESIAN_POINT('',(127.873079,-155.735491,1.545)); +#218012 = VECTOR('',#218013,1.); +#218013 = DIRECTION('',(0.,-1.,0.)); +#218014 = ORIENTED_EDGE('',*,*,#218015,.F.); +#218015 = EDGE_CURVE('',#218016,#218008,#218018,.T.); +#218016 = VERTEX_POINT('',#218017); +#218017 = CARTESIAN_POINT('',(127.873079,-157.069509,1.51)); +#218018 = LINE('',#218019,#218020); +#218019 = CARTESIAN_POINT('',(127.873079,-157.069509,1.51)); +#218020 = VECTOR('',#218021,1.); +#218021 = DIRECTION('',(0.,0.,1.)); +#218022 = ORIENTED_EDGE('',*,*,#218023,.F.); +#218023 = EDGE_CURVE('',#217985,#218016,#218024,.T.); +#218024 = LINE('',#218025,#218026); +#218025 = CARTESIAN_POINT('',(127.873079,-155.735491,1.51)); +#218026 = VECTOR('',#218027,1.); +#218027 = DIRECTION('',(0.,-1.,0.)); +#218028 = PLANE('',#218029); +#218029 = AXIS2_PLACEMENT_3D('',#218030,#218031,#218032); +#218030 = CARTESIAN_POINT('',(127.873079,-155.735491,1.51)); +#218031 = DIRECTION('',(1.,0.,-0.)); +#218032 = DIRECTION('',(0.,-1.,0.)); +#218033 = ADVANCED_FACE('',(#218034),#218061,.T.); +#218034 = FACE_BOUND('',#218035,.T.); +#218035 = EDGE_LOOP('',(#218036,#218037,#218046,#218054)); +#218036 = ORIENTED_EDGE('',*,*,#218015,.T.); +#218037 = ORIENTED_EDGE('',*,*,#218038,.T.); +#218038 = EDGE_CURVE('',#218008,#218039,#218041,.T.); +#218039 = VERTEX_POINT('',#218040); +#218040 = CARTESIAN_POINT('',(127.719443,-157.133147,1.545)); +#218041 = CIRCLE('',#218042,9.999986478836E-02); +#218042 = AXIS2_PLACEMENT_3D('',#218043,#218044,#218045); +#218043 = CARTESIAN_POINT('',(127.7750005,-157.0500005199,1.545)); +#218044 = DIRECTION('',(-0.,0.,-1.)); +#218045 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#218046 = ORIENTED_EDGE('',*,*,#218047,.F.); +#218047 = EDGE_CURVE('',#218048,#218039,#218050,.T.); +#218048 = VERTEX_POINT('',#218049); +#218049 = CARTESIAN_POINT('',(127.719443,-157.133147,1.51)); +#218050 = LINE('',#218051,#218052); +#218051 = CARTESIAN_POINT('',(127.719443,-157.133147,1.51)); +#218052 = VECTOR('',#218053,1.); +#218053 = DIRECTION('',(0.,0.,1.)); +#218054 = ORIENTED_EDGE('',*,*,#218055,.F.); +#218055 = EDGE_CURVE('',#218016,#218048,#218056,.T.); +#218056 = CIRCLE('',#218057,9.999986478836E-02); +#218057 = AXIS2_PLACEMENT_3D('',#218058,#218059,#218060); +#218058 = CARTESIAN_POINT('',(127.7750005,-157.0500005199,1.51)); +#218059 = DIRECTION('',(-0.,0.,-1.)); +#218060 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#218061 = CYLINDRICAL_SURFACE('',#218062,9.999986478836E-02); +#218062 = AXIS2_PLACEMENT_3D('',#218063,#218064,#218065); +#218063 = CARTESIAN_POINT('',(127.7750005,-157.0500005199,1.51)); +#218064 = DIRECTION('',(-0.,0.,-1.)); +#218065 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#218066 = ADVANCED_FACE('',(#218067),#218092,.T.); +#218067 = FACE_BOUND('',#218068,.T.); +#218068 = EDGE_LOOP('',(#218069,#218070,#218078,#218086)); +#218069 = ORIENTED_EDGE('',*,*,#218047,.T.); +#218070 = ORIENTED_EDGE('',*,*,#218071,.T.); +#218071 = EDGE_CURVE('',#218039,#218072,#218074,.T.); +#218072 = VERTEX_POINT('',#218073); +#218073 = CARTESIAN_POINT('',(125.641853,-155.055557,1.545)); +#218074 = LINE('',#218075,#218076); +#218075 = CARTESIAN_POINT('',(127.719443,-157.133147,1.545)); +#218076 = VECTOR('',#218077,1.); +#218077 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#218078 = ORIENTED_EDGE('',*,*,#218079,.F.); +#218079 = EDGE_CURVE('',#218080,#218072,#218082,.T.); +#218080 = VERTEX_POINT('',#218081); +#218081 = CARTESIAN_POINT('',(125.641853,-155.055557,1.51)); +#218082 = LINE('',#218083,#218084); +#218083 = CARTESIAN_POINT('',(125.641853,-155.055557,1.51)); +#218084 = VECTOR('',#218085,1.); +#218085 = DIRECTION('',(0.,0.,1.)); +#218086 = ORIENTED_EDGE('',*,*,#218087,.F.); +#218087 = EDGE_CURVE('',#218048,#218080,#218088,.T.); +#218088 = LINE('',#218089,#218090); +#218089 = CARTESIAN_POINT('',(127.719443,-157.133147,1.51)); +#218090 = VECTOR('',#218091,1.); +#218091 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#218092 = PLANE('',#218093); +#218093 = AXIS2_PLACEMENT_3D('',#218094,#218095,#218096); +#218094 = CARTESIAN_POINT('',(127.719443,-157.133147,1.51)); +#218095 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#218096 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#218097 = ADVANCED_FACE('',(#218098),#218123,.T.); +#218098 = FACE_BOUND('',#218099,.T.); +#218099 = EDGE_LOOP('',(#218100,#218101,#218109,#218117)); +#218100 = ORIENTED_EDGE('',*,*,#218079,.T.); +#218101 = ORIENTED_EDGE('',*,*,#218102,.T.); +#218102 = EDGE_CURVE('',#218072,#218103,#218105,.T.); +#218103 = VERTEX_POINT('',#218104); +#218104 = CARTESIAN_POINT('',(125.626921,-155.019509,1.545)); +#218105 = LINE('',#218106,#218107); +#218106 = CARTESIAN_POINT('',(125.641853,-155.055557,1.545)); +#218107 = VECTOR('',#218108,1.); +#218108 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#218109 = ORIENTED_EDGE('',*,*,#218110,.F.); +#218110 = EDGE_CURVE('',#218111,#218103,#218113,.T.); +#218111 = VERTEX_POINT('',#218112); +#218112 = CARTESIAN_POINT('',(125.626921,-155.019509,1.51)); +#218113 = LINE('',#218114,#218115); +#218114 = CARTESIAN_POINT('',(125.626921,-155.019509,1.51)); +#218115 = VECTOR('',#218116,1.); +#218116 = DIRECTION('',(0.,0.,1.)); +#218117 = ORIENTED_EDGE('',*,*,#218118,.F.); +#218118 = EDGE_CURVE('',#218080,#218111,#218119,.T.); +#218119 = LINE('',#218120,#218121); +#218120 = CARTESIAN_POINT('',(125.641853,-155.055557,1.51)); +#218121 = VECTOR('',#218122,1.); +#218122 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#218123 = PLANE('',#218124); +#218124 = AXIS2_PLACEMENT_3D('',#218125,#218126,#218127); +#218125 = CARTESIAN_POINT('',(125.641853,-155.055557,1.51)); +#218126 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#218127 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#218128 = ADVANCED_FACE('',(#218129),#218154,.T.); +#218129 = FACE_BOUND('',#218130,.T.); +#218130 = EDGE_LOOP('',(#218131,#218132,#218140,#218148)); +#218131 = ORIENTED_EDGE('',*,*,#218110,.T.); +#218132 = ORIENTED_EDGE('',*,*,#218133,.T.); +#218133 = EDGE_CURVE('',#218103,#218134,#218136,.T.); +#218134 = VERTEX_POINT('',#218135); +#218135 = CARTESIAN_POINT('',(125.625,-154.266422,1.545)); +#218136 = LINE('',#218137,#218138); +#218137 = CARTESIAN_POINT('',(125.626921,-155.019509,1.545)); +#218138 = VECTOR('',#218139,1.); +#218139 = DIRECTION('',(-2.550825801386E-03,0.999996746639,0.)); +#218140 = ORIENTED_EDGE('',*,*,#218141,.F.); +#218141 = EDGE_CURVE('',#218142,#218134,#218144,.T.); +#218142 = VERTEX_POINT('',#218143); +#218143 = CARTESIAN_POINT('',(125.625,-154.266422,1.51)); +#218144 = LINE('',#218145,#218146); +#218145 = CARTESIAN_POINT('',(125.625,-154.266422,1.51)); +#218146 = VECTOR('',#218147,1.); +#218147 = DIRECTION('',(0.,0.,1.)); +#218148 = ORIENTED_EDGE('',*,*,#218149,.F.); +#218149 = EDGE_CURVE('',#218111,#218142,#218150,.T.); +#218150 = LINE('',#218151,#218152); +#218151 = CARTESIAN_POINT('',(125.626921,-155.019509,1.51)); +#218152 = VECTOR('',#218153,1.); +#218153 = DIRECTION('',(-2.550825801386E-03,0.999996746639,0.)); +#218154 = PLANE('',#218155); +#218155 = AXIS2_PLACEMENT_3D('',#218156,#218157,#218158); +#218156 = CARTESIAN_POINT('',(125.626921,-155.019509,1.51)); +#218157 = DIRECTION('',(-0.999996746639,-2.550825801386E-03,0.)); +#218158 = DIRECTION('',(-2.550825801386E-03,0.999996746639,0.)); +#218159 = ADVANCED_FACE('',(#218160),#218185,.T.); +#218160 = FACE_BOUND('',#218161,.T.); +#218161 = EDGE_LOOP('',(#218162,#218163,#218171,#218179)); +#218162 = ORIENTED_EDGE('',*,*,#218141,.T.); +#218163 = ORIENTED_EDGE('',*,*,#218164,.T.); +#218164 = EDGE_CURVE('',#218134,#218165,#218167,.T.); +#218165 = VERTEX_POINT('',#218166); +#218166 = CARTESIAN_POINT('',(125.224032,-153.862736,1.545)); +#218167 = LINE('',#218168,#218169); +#218168 = CARTESIAN_POINT('',(125.625,-154.266422,1.545)); +#218169 = VECTOR('',#218170,1.); +#218170 = DIRECTION('',(-0.704714260661,0.709491233787,0.)); +#218171 = ORIENTED_EDGE('',*,*,#218172,.F.); +#218172 = EDGE_CURVE('',#218173,#218165,#218175,.T.); +#218173 = VERTEX_POINT('',#218174); +#218174 = CARTESIAN_POINT('',(125.224032,-153.862736,1.51)); +#218175 = LINE('',#218176,#218177); +#218176 = CARTESIAN_POINT('',(125.224032,-153.862736,1.51)); +#218177 = VECTOR('',#218178,1.); +#218178 = DIRECTION('',(0.,0.,1.)); +#218179 = ORIENTED_EDGE('',*,*,#218180,.F.); +#218180 = EDGE_CURVE('',#218142,#218173,#218181,.T.); +#218181 = LINE('',#218182,#218183); +#218182 = CARTESIAN_POINT('',(125.625,-154.266422,1.51)); +#218183 = VECTOR('',#218184,1.); +#218184 = DIRECTION('',(-0.704714260661,0.709491233787,0.)); +#218185 = PLANE('',#218186); +#218186 = AXIS2_PLACEMENT_3D('',#218187,#218188,#218189); +#218187 = CARTESIAN_POINT('',(125.625,-154.266422,1.51)); +#218188 = DIRECTION('',(-0.709491233787,-0.704714260661,0.)); +#218189 = DIRECTION('',(-0.704714260661,0.709491233787,0.)); +#218190 = ADVANCED_FACE('',(#218191),#218216,.T.); +#218191 = FACE_BOUND('',#218192,.T.); +#218192 = EDGE_LOOP('',(#218193,#218194,#218202,#218210)); +#218193 = ORIENTED_EDGE('',*,*,#218172,.T.); +#218194 = ORIENTED_EDGE('',*,*,#218195,.T.); +#218195 = EDGE_CURVE('',#218165,#218196,#218198,.T.); +#218196 = VERTEX_POINT('',#218197); +#218197 = CARTESIAN_POINT('',(125.2091,-153.826688,1.545)); +#218198 = LINE('',#218199,#218200); +#218199 = CARTESIAN_POINT('',(125.224032,-153.862736,1.545)); +#218200 = VECTOR('',#218201,1.); +#218201 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#218202 = ORIENTED_EDGE('',*,*,#218203,.F.); +#218203 = EDGE_CURVE('',#218204,#218196,#218206,.T.); +#218204 = VERTEX_POINT('',#218205); +#218205 = CARTESIAN_POINT('',(125.2091,-153.826688,1.51)); +#218206 = LINE('',#218207,#218208); +#218207 = CARTESIAN_POINT('',(125.2091,-153.826688,1.51)); +#218208 = VECTOR('',#218209,1.); +#218209 = DIRECTION('',(0.,0.,1.)); +#218210 = ORIENTED_EDGE('',*,*,#218211,.F.); +#218211 = EDGE_CURVE('',#218173,#218204,#218212,.T.); +#218212 = LINE('',#218213,#218214); +#218213 = CARTESIAN_POINT('',(125.224032,-153.862736,1.51)); +#218214 = VECTOR('',#218215,1.); +#218215 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#218216 = PLANE('',#218217); +#218217 = AXIS2_PLACEMENT_3D('',#218218,#218219,#218220); +#218218 = CARTESIAN_POINT('',(125.224032,-153.862736,1.51)); +#218219 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#218220 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#218221 = ADVANCED_FACE('',(#218222),#218247,.T.); +#218222 = FACE_BOUND('',#218223,.T.); +#218223 = EDGE_LOOP('',(#218224,#218225,#218233,#218241)); +#218224 = ORIENTED_EDGE('',*,*,#218203,.T.); +#218225 = ORIENTED_EDGE('',*,*,#218226,.T.); +#218226 = EDGE_CURVE('',#218196,#218227,#218229,.T.); +#218227 = VERTEX_POINT('',#218228); +#218228 = CARTESIAN_POINT('',(125.207179,-152.88113,1.545)); +#218229 = LINE('',#218230,#218231); +#218230 = CARTESIAN_POINT('',(125.2091,-153.826688,1.545)); +#218231 = VECTOR('',#218232,1.); +#218232 = DIRECTION('',(-2.031600426032E-03,0.999997936298,0.)); +#218233 = ORIENTED_EDGE('',*,*,#218234,.F.); +#218234 = EDGE_CURVE('',#218235,#218227,#218237,.T.); +#218235 = VERTEX_POINT('',#218236); +#218236 = CARTESIAN_POINT('',(125.207179,-152.88113,1.51)); +#218237 = LINE('',#218238,#218239); +#218238 = CARTESIAN_POINT('',(125.207179,-152.88113,1.51)); +#218239 = VECTOR('',#218240,1.); +#218240 = DIRECTION('',(0.,0.,1.)); +#218241 = ORIENTED_EDGE('',*,*,#218242,.F.); +#218242 = EDGE_CURVE('',#218204,#218235,#218243,.T.); +#218243 = LINE('',#218244,#218245); +#218244 = CARTESIAN_POINT('',(125.2091,-153.826688,1.51)); +#218245 = VECTOR('',#218246,1.); +#218246 = DIRECTION('',(-2.031600426032E-03,0.999997936298,0.)); +#218247 = PLANE('',#218248); +#218248 = AXIS2_PLACEMENT_3D('',#218249,#218250,#218251); +#218249 = CARTESIAN_POINT('',(125.2091,-153.826688,1.51)); +#218250 = DIRECTION('',(-0.999997936298,-2.031600426032E-03,0.)); +#218251 = DIRECTION('',(-2.031600426032E-03,0.999997936298,0.)); +#218252 = ADVANCED_FACE('',(#218253),#218278,.T.); +#218253 = FACE_BOUND('',#218254,.T.); +#218254 = EDGE_LOOP('',(#218255,#218256,#218264,#218272)); +#218255 = ORIENTED_EDGE('',*,*,#218234,.T.); +#218256 = ORIENTED_EDGE('',*,*,#218257,.T.); +#218257 = EDGE_CURVE('',#218227,#218258,#218260,.T.); +#218258 = VERTEX_POINT('',#218259); +#218259 = CARTESIAN_POINT('',(125.192374,-152.877164,1.545)); +#218260 = LINE('',#218261,#218262); +#218261 = CARTESIAN_POINT('',(125.207179,-152.88113,1.545)); +#218262 = VECTOR('',#218263,1.); +#218263 = DIRECTION('',(-0.965941936399,0.258758913866,0.)); +#218264 = ORIENTED_EDGE('',*,*,#218265,.F.); +#218265 = EDGE_CURVE('',#218266,#218258,#218268,.T.); +#218266 = VERTEX_POINT('',#218267); +#218267 = CARTESIAN_POINT('',(125.192374,-152.877164,1.51)); +#218268 = LINE('',#218269,#218270); +#218269 = CARTESIAN_POINT('',(125.192374,-152.877164,1.51)); +#218270 = VECTOR('',#218271,1.); +#218271 = DIRECTION('',(0.,0.,1.)); +#218272 = ORIENTED_EDGE('',*,*,#218273,.F.); +#218273 = EDGE_CURVE('',#218235,#218266,#218274,.T.); +#218274 = LINE('',#218275,#218276); +#218275 = CARTESIAN_POINT('',(125.207179,-152.88113,1.51)); +#218276 = VECTOR('',#218277,1.); +#218277 = DIRECTION('',(-0.965941936399,0.258758913866,0.)); +#218278 = PLANE('',#218279); +#218279 = AXIS2_PLACEMENT_3D('',#218280,#218281,#218282); +#218280 = CARTESIAN_POINT('',(125.207179,-152.88113,1.51)); +#218281 = DIRECTION('',(-0.258758913866,-0.965941936399,0.)); +#218282 = DIRECTION('',(-0.965941936399,0.258758913866,0.)); +#218283 = ADVANCED_FACE('',(#218284),#218311,.T.); +#218284 = FACE_BOUND('',#218285,.T.); +#218285 = EDGE_LOOP('',(#218286,#218287,#218296,#218304)); +#218286 = ORIENTED_EDGE('',*,*,#218265,.T.); +#218287 = ORIENTED_EDGE('',*,*,#218288,.T.); +#218288 = EDGE_CURVE('',#218258,#218289,#218291,.T.); +#218289 = VERTEX_POINT('',#218290); +#218290 = CARTESIAN_POINT('',(125.421984,-152.877164,1.545)); +#218291 = CIRCLE('',#218292,0.299999472923); +#218292 = AXIS2_PLACEMENT_3D('',#218293,#218294,#218295); +#218293 = CARTESIAN_POINT('',(125.307179,-152.6000006984,1.545)); +#218294 = DIRECTION('',(0.,0.,-1.)); +#218295 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#218296 = ORIENTED_EDGE('',*,*,#218297,.F.); +#218297 = EDGE_CURVE('',#218298,#218289,#218300,.T.); +#218298 = VERTEX_POINT('',#218299); +#218299 = CARTESIAN_POINT('',(125.421984,-152.877164,1.51)); +#218300 = LINE('',#218301,#218302); +#218301 = CARTESIAN_POINT('',(125.421984,-152.877164,1.51)); +#218302 = VECTOR('',#218303,1.); +#218303 = DIRECTION('',(0.,0.,1.)); +#218304 = ORIENTED_EDGE('',*,*,#218305,.F.); +#218305 = EDGE_CURVE('',#218266,#218298,#218306,.T.); +#218306 = CIRCLE('',#218307,0.299999472923); +#218307 = AXIS2_PLACEMENT_3D('',#218308,#218309,#218310); +#218308 = CARTESIAN_POINT('',(125.307179,-152.6000006984,1.51)); +#218309 = DIRECTION('',(0.,0.,-1.)); +#218310 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#218311 = CYLINDRICAL_SURFACE('',#218312,0.299999472923); +#218312 = AXIS2_PLACEMENT_3D('',#218313,#218314,#218315); +#218313 = CARTESIAN_POINT('',(125.307179,-152.6000006984,1.51)); +#218314 = DIRECTION('',(0.,0.,-1.)); +#218315 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#218316 = ADVANCED_FACE('',(#218317),#218333,.T.); +#218317 = FACE_BOUND('',#218318,.T.); +#218318 = EDGE_LOOP('',(#218319,#218320,#218326,#218327)); +#218319 = ORIENTED_EDGE('',*,*,#218297,.T.); +#218320 = ORIENTED_EDGE('',*,*,#218321,.T.); +#218321 = EDGE_CURVE('',#218289,#217688,#218322,.T.); +#218322 = LINE('',#218323,#218324); +#218323 = CARTESIAN_POINT('',(125.421984,-152.877164,1.545)); +#218324 = VECTOR('',#218325,1.); +#218325 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#218326 = ORIENTED_EDGE('',*,*,#217685,.F.); +#218327 = ORIENTED_EDGE('',*,*,#218328,.F.); +#218328 = EDGE_CURVE('',#218298,#217686,#218329,.T.); +#218329 = LINE('',#218330,#218331); +#218330 = CARTESIAN_POINT('',(125.421984,-152.877164,1.51)); +#218331 = VECTOR('',#218332,1.); +#218332 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#218333 = PLANE('',#218334); +#218334 = AXIS2_PLACEMENT_3D('',#218335,#218336,#218337); +#218335 = CARTESIAN_POINT('',(125.421984,-152.877164,1.51)); +#218336 = DIRECTION('',(0.258758913866,-0.965941936399,0.)); +#218337 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#218338 = ADVANCED_FACE('',(#218339),#218366,.F.); +#218339 = FACE_BOUND('',#218340,.T.); +#218340 = EDGE_LOOP('',(#218341,#218351,#218358,#218359)); +#218341 = ORIENTED_EDGE('',*,*,#218342,.T.); +#218342 = EDGE_CURVE('',#218343,#218345,#218347,.T.); +#218343 = VERTEX_POINT('',#218344); +#218344 = CARTESIAN_POINT('',(125.444434,-152.6,1.51)); +#218345 = VERTEX_POINT('',#218346); +#218346 = CARTESIAN_POINT('',(125.444434,-152.6,1.545)); +#218347 = LINE('',#218348,#218349); +#218348 = CARTESIAN_POINT('',(125.444434,-152.6,1.51)); +#218349 = VECTOR('',#218350,1.); +#218350 = DIRECTION('',(0.,0.,1.)); +#218351 = ORIENTED_EDGE('',*,*,#218352,.T.); +#218352 = EDGE_CURVE('',#218345,#218345,#218353,.T.); +#218353 = CIRCLE('',#218354,0.137255); +#218354 = AXIS2_PLACEMENT_3D('',#218355,#218356,#218357); +#218355 = CARTESIAN_POINT('',(125.307179,-152.6,1.545)); +#218356 = DIRECTION('',(0.,0.,1.)); +#218357 = DIRECTION('',(1.,0.,-0.)); +#218358 = ORIENTED_EDGE('',*,*,#218342,.F.); +#218359 = ORIENTED_EDGE('',*,*,#218360,.F.); +#218360 = EDGE_CURVE('',#218343,#218343,#218361,.T.); +#218361 = CIRCLE('',#218362,0.137255); +#218362 = AXIS2_PLACEMENT_3D('',#218363,#218364,#218365); +#218363 = CARTESIAN_POINT('',(125.307179,-152.6,1.51)); +#218364 = DIRECTION('',(0.,0.,1.)); +#218365 = DIRECTION('',(1.,0.,-0.)); +#218366 = CYLINDRICAL_SURFACE('',#218367,0.137255); +#218367 = AXIS2_PLACEMENT_3D('',#218368,#218369,#218370); +#218368 = CARTESIAN_POINT('',(125.307179,-152.6,1.51)); +#218369 = DIRECTION('',(-0.,-0.,-1.)); +#218370 = DIRECTION('',(1.,0.,-0.)); +#218371 = ADVANCED_FACE('',(#218372,#218395),#218398,.F.); +#218372 = FACE_BOUND('',#218373,.T.); +#218373 = EDGE_LOOP('',(#218374,#218375,#218376,#218377,#218378,#218379, + #218380,#218381,#218382,#218383,#218384,#218385,#218386,#218387, + #218388,#218389,#218390,#218391,#218392,#218393,#218394)); +#218374 = ORIENTED_EDGE('',*,*,#217711,.T.); +#218375 = ORIENTED_EDGE('',*,*,#217742,.T.); +#218376 = ORIENTED_EDGE('',*,*,#217773,.T.); +#218377 = ORIENTED_EDGE('',*,*,#217804,.T.); +#218378 = ORIENTED_EDGE('',*,*,#217835,.T.); +#218379 = ORIENTED_EDGE('',*,*,#217866,.T.); +#218380 = ORIENTED_EDGE('',*,*,#217897,.T.); +#218381 = ORIENTED_EDGE('',*,*,#217929,.T.); +#218382 = ORIENTED_EDGE('',*,*,#217961,.T.); +#218383 = ORIENTED_EDGE('',*,*,#217992,.T.); +#218384 = ORIENTED_EDGE('',*,*,#218023,.T.); +#218385 = ORIENTED_EDGE('',*,*,#218055,.T.); +#218386 = ORIENTED_EDGE('',*,*,#218087,.T.); +#218387 = ORIENTED_EDGE('',*,*,#218118,.T.); +#218388 = ORIENTED_EDGE('',*,*,#218149,.T.); +#218389 = ORIENTED_EDGE('',*,*,#218180,.T.); +#218390 = ORIENTED_EDGE('',*,*,#218211,.T.); +#218391 = ORIENTED_EDGE('',*,*,#218242,.T.); +#218392 = ORIENTED_EDGE('',*,*,#218273,.T.); +#218393 = ORIENTED_EDGE('',*,*,#218305,.T.); +#218394 = ORIENTED_EDGE('',*,*,#218328,.T.); +#218395 = FACE_BOUND('',#218396,.T.); +#218396 = EDGE_LOOP('',(#218397)); +#218397 = ORIENTED_EDGE('',*,*,#218360,.T.); +#218398 = PLANE('',#218399); +#218399 = AXIS2_PLACEMENT_3D('',#218400,#218401,#218402); +#218400 = CARTESIAN_POINT('',(0.,0.,1.51)); +#218401 = DIRECTION('',(0.,0.,1.)); +#218402 = DIRECTION('',(1.,0.,-0.)); +#218403 = ADVANCED_FACE('',(#218404,#218427),#218430,.T.); +#218404 = FACE_BOUND('',#218405,.F.); +#218405 = EDGE_LOOP('',(#218406,#218407,#218408,#218409,#218410,#218411, + #218412,#218413,#218414,#218415,#218416,#218417,#218418,#218419, + #218420,#218421,#218422,#218423,#218424,#218425,#218426)); +#218406 = ORIENTED_EDGE('',*,*,#217695,.T.); +#218407 = ORIENTED_EDGE('',*,*,#217726,.T.); +#218408 = ORIENTED_EDGE('',*,*,#217757,.T.); +#218409 = ORIENTED_EDGE('',*,*,#217788,.T.); +#218410 = ORIENTED_EDGE('',*,*,#217819,.T.); +#218411 = ORIENTED_EDGE('',*,*,#217850,.T.); +#218412 = ORIENTED_EDGE('',*,*,#217881,.T.); +#218413 = ORIENTED_EDGE('',*,*,#217912,.T.); +#218414 = ORIENTED_EDGE('',*,*,#217945,.T.); +#218415 = ORIENTED_EDGE('',*,*,#217976,.T.); +#218416 = ORIENTED_EDGE('',*,*,#218007,.T.); +#218417 = ORIENTED_EDGE('',*,*,#218038,.T.); +#218418 = ORIENTED_EDGE('',*,*,#218071,.T.); +#218419 = ORIENTED_EDGE('',*,*,#218102,.T.); +#218420 = ORIENTED_EDGE('',*,*,#218133,.T.); +#218421 = ORIENTED_EDGE('',*,*,#218164,.T.); +#218422 = ORIENTED_EDGE('',*,*,#218195,.T.); +#218423 = ORIENTED_EDGE('',*,*,#218226,.T.); +#218424 = ORIENTED_EDGE('',*,*,#218257,.T.); +#218425 = ORIENTED_EDGE('',*,*,#218288,.T.); +#218426 = ORIENTED_EDGE('',*,*,#218321,.T.); +#218427 = FACE_BOUND('',#218428,.F.); +#218428 = EDGE_LOOP('',(#218429)); +#218429 = ORIENTED_EDGE('',*,*,#218352,.T.); +#218430 = PLANE('',#218431); +#218431 = AXIS2_PLACEMENT_3D('',#218432,#218433,#218434); +#218432 = CARTESIAN_POINT('',(0.,0.,1.545)); +#218433 = DIRECTION('',(0.,0.,1.)); +#218434 = DIRECTION('',(1.,0.,-0.)); +#218435 = MANIFOLD_SOLID_BREP('',#218436); +#218436 = CLOSED_SHELL('',(#218437,#218479,#218510,#218541,#218574, + #218605,#218636,#218667,#218698,#218729,#218760,#218791,#218822, + #218853,#218884,#218915,#218946,#218977,#219008,#219039,#219070, + #219101,#219132,#219163,#219194,#219225,#219256,#219287,#219318, + #219349,#219380,#219411,#219442,#219473,#219504,#219535,#219566, + #219597,#219630,#219661,#219692,#219723,#219754,#219785,#219816, + #219847,#219880,#219911,#219942,#219973,#220004,#220037,#220068, + #220099,#220130,#220161,#220192,#220223,#220254,#220285,#220316, + #220347,#220378,#220409,#220440,#220471,#220502,#220533,#220566, + #220597,#220628,#220661,#220692,#220723,#220745,#220778,#220863)); +#218437 = ADVANCED_FACE('',(#218438),#218474,.T.); +#218438 = FACE_BOUND('',#218439,.T.); +#218439 = EDGE_LOOP('',(#218440,#218450,#218459,#218467)); +#218440 = ORIENTED_EDGE('',*,*,#218441,.T.); +#218441 = EDGE_CURVE('',#218442,#218444,#218446,.T.); +#218442 = VERTEX_POINT('',#218443); +#218443 = CARTESIAN_POINT('',(146.694443,-67.106853,1.51)); +#218444 = VERTEX_POINT('',#218445); +#218445 = CARTESIAN_POINT('',(146.694443,-67.106853,1.545)); +#218446 = LINE('',#218447,#218448); +#218447 = CARTESIAN_POINT('',(146.694443,-67.106853,1.51)); +#218448 = VECTOR('',#218449,1.); +#218449 = DIRECTION('',(0.,0.,1.)); +#218450 = ORIENTED_EDGE('',*,*,#218451,.T.); +#218451 = EDGE_CURVE('',#218444,#218452,#218454,.T.); +#218452 = VERTEX_POINT('',#218453); +#218453 = CARTESIAN_POINT('',(146.848079,-67.170491,1.545)); +#218454 = CIRCLE('',#218455,0.100000590676); +#218455 = AXIS2_PLACEMENT_3D('',#218456,#218457,#218458); +#218456 = CARTESIAN_POINT('',(146.75,-67.1900006872,1.545)); +#218457 = DIRECTION('',(0.,0.,-1.)); +#218458 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#218459 = ORIENTED_EDGE('',*,*,#218460,.F.); +#218460 = EDGE_CURVE('',#218461,#218452,#218463,.T.); +#218461 = VERTEX_POINT('',#218462); +#218462 = CARTESIAN_POINT('',(146.848079,-67.170491,1.51)); +#218463 = LINE('',#218464,#218465); +#218464 = CARTESIAN_POINT('',(146.848079,-67.170491,1.51)); +#218465 = VECTOR('',#218466,1.); +#218466 = DIRECTION('',(0.,0.,1.)); +#218467 = ORIENTED_EDGE('',*,*,#218468,.F.); +#218468 = EDGE_CURVE('',#218442,#218461,#218469,.T.); +#218469 = CIRCLE('',#218470,0.100000590676); +#218470 = AXIS2_PLACEMENT_3D('',#218471,#218472,#218473); +#218471 = CARTESIAN_POINT('',(146.75,-67.1900006872,1.51)); +#218472 = DIRECTION('',(0.,0.,-1.)); +#218473 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#218474 = CYLINDRICAL_SURFACE('',#218475,0.100000590676); +#218475 = AXIS2_PLACEMENT_3D('',#218476,#218477,#218478); +#218476 = CARTESIAN_POINT('',(146.75,-67.1900006872,1.51)); +#218477 = DIRECTION('',(0.,0.,-1.)); +#218478 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#218479 = ADVANCED_FACE('',(#218480),#218505,.T.); +#218480 = FACE_BOUND('',#218481,.T.); +#218481 = EDGE_LOOP('',(#218482,#218483,#218491,#218499)); +#218482 = ORIENTED_EDGE('',*,*,#218460,.T.); +#218483 = ORIENTED_EDGE('',*,*,#218484,.T.); +#218484 = EDGE_CURVE('',#218452,#218485,#218487,.T.); +#218485 = VERTEX_POINT('',#218486); +#218486 = CARTESIAN_POINT('',(146.85,-67.61,1.545)); +#218487 = LINE('',#218488,#218489); +#218488 = CARTESIAN_POINT('',(146.848079,-67.170491,1.545)); +#218489 = VECTOR('',#218490,1.); +#218490 = DIRECTION('',(4.370744742586E-03,-0.99999044825,0.)); +#218491 = ORIENTED_EDGE('',*,*,#218492,.F.); +#218492 = EDGE_CURVE('',#218493,#218485,#218495,.T.); +#218493 = VERTEX_POINT('',#218494); +#218494 = CARTESIAN_POINT('',(146.85,-67.61,1.51)); +#218495 = LINE('',#218496,#218497); +#218496 = CARTESIAN_POINT('',(146.85,-67.61,1.51)); +#218497 = VECTOR('',#218498,1.); +#218498 = DIRECTION('',(0.,0.,1.)); +#218499 = ORIENTED_EDGE('',*,*,#218500,.F.); +#218500 = EDGE_CURVE('',#218461,#218493,#218501,.T.); +#218501 = LINE('',#218502,#218503); +#218502 = CARTESIAN_POINT('',(146.848079,-67.170491,1.51)); +#218503 = VECTOR('',#218504,1.); +#218504 = DIRECTION('',(4.370744742586E-03,-0.99999044825,0.)); +#218505 = PLANE('',#218506); +#218506 = AXIS2_PLACEMENT_3D('',#218507,#218508,#218509); +#218507 = CARTESIAN_POINT('',(146.848079,-67.170491,1.51)); +#218508 = DIRECTION('',(0.99999044825,4.370744742586E-03,-0.)); +#218509 = DIRECTION('',(4.370744742586E-03,-0.99999044825,0.)); +#218510 = ADVANCED_FACE('',(#218511),#218536,.T.); +#218511 = FACE_BOUND('',#218512,.T.); +#218512 = EDGE_LOOP('',(#218513,#218514,#218522,#218530)); +#218513 = ORIENTED_EDGE('',*,*,#218492,.T.); +#218514 = ORIENTED_EDGE('',*,*,#218515,.T.); +#218515 = EDGE_CURVE('',#218485,#218516,#218518,.T.); +#218516 = VERTEX_POINT('',#218517); +#218517 = CARTESIAN_POINT('',(147.819509,-67.611921,1.545)); +#218518 = LINE('',#218519,#218520); +#218519 = CARTESIAN_POINT('',(146.85,-67.61,1.545)); +#218520 = VECTOR('',#218521,1.); +#218521 = DIRECTION('',(0.999998037002,-1.981411445461E-03,0.)); +#218522 = ORIENTED_EDGE('',*,*,#218523,.F.); +#218523 = EDGE_CURVE('',#218524,#218516,#218526,.T.); +#218524 = VERTEX_POINT('',#218525); +#218525 = CARTESIAN_POINT('',(147.819509,-67.611921,1.51)); +#218526 = LINE('',#218527,#218528); +#218527 = CARTESIAN_POINT('',(147.819509,-67.611921,1.51)); +#218528 = VECTOR('',#218529,1.); +#218529 = DIRECTION('',(0.,0.,1.)); +#218530 = ORIENTED_EDGE('',*,*,#218531,.F.); +#218531 = EDGE_CURVE('',#218493,#218524,#218532,.T.); +#218532 = LINE('',#218533,#218534); +#218533 = CARTESIAN_POINT('',(146.85,-67.61,1.51)); +#218534 = VECTOR('',#218535,1.); +#218535 = DIRECTION('',(0.999998037002,-1.981411445461E-03,0.)); +#218536 = PLANE('',#218537); +#218537 = AXIS2_PLACEMENT_3D('',#218538,#218539,#218540); +#218538 = CARTESIAN_POINT('',(146.85,-67.61,1.51)); +#218539 = DIRECTION('',(1.981411445461E-03,0.999998037002,-0.)); +#218540 = DIRECTION('',(0.999998037002,-1.981411445461E-03,0.)); +#218541 = ADVANCED_FACE('',(#218542),#218569,.T.); +#218542 = FACE_BOUND('',#218543,.T.); +#218543 = EDGE_LOOP('',(#218544,#218545,#218554,#218562)); +#218544 = ORIENTED_EDGE('',*,*,#218523,.T.); +#218545 = ORIENTED_EDGE('',*,*,#218546,.T.); +#218546 = EDGE_CURVE('',#218516,#218547,#218549,.T.); +#218547 = VERTEX_POINT('',#218548); +#218548 = CARTESIAN_POINT('',(147.898079,-67.690491,1.545)); +#218549 = CIRCLE('',#218550,0.100002891901); +#218550 = AXIS2_PLACEMENT_3D('',#218551,#218552,#218553); +#218551 = CARTESIAN_POINT('',(147.79999792896,-67.71000207103,1.545)); +#218552 = DIRECTION('',(0.,0.,-1.)); +#218553 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#218554 = ORIENTED_EDGE('',*,*,#218555,.F.); +#218555 = EDGE_CURVE('',#218556,#218547,#218558,.T.); +#218556 = VERTEX_POINT('',#218557); +#218557 = CARTESIAN_POINT('',(147.898079,-67.690491,1.51)); +#218558 = LINE('',#218559,#218560); +#218559 = CARTESIAN_POINT('',(147.898079,-67.690491,1.51)); +#218560 = VECTOR('',#218561,1.); +#218561 = DIRECTION('',(0.,0.,1.)); +#218562 = ORIENTED_EDGE('',*,*,#218563,.F.); +#218563 = EDGE_CURVE('',#218524,#218556,#218564,.T.); +#218564 = CIRCLE('',#218565,0.100002891901); +#218565 = AXIS2_PLACEMENT_3D('',#218566,#218567,#218568); +#218566 = CARTESIAN_POINT('',(147.79999792896,-67.71000207103,1.51)); +#218567 = DIRECTION('',(0.,0.,-1.)); +#218568 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#218569 = CYLINDRICAL_SURFACE('',#218570,0.100002891901); +#218570 = AXIS2_PLACEMENT_3D('',#218571,#218572,#218573); +#218571 = CARTESIAN_POINT('',(147.79999792896,-67.71000207103,1.51)); +#218572 = DIRECTION('',(0.,0.,-1.)); +#218573 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#218574 = ADVANCED_FACE('',(#218575),#218600,.T.); +#218575 = FACE_BOUND('',#218576,.T.); +#218576 = EDGE_LOOP('',(#218577,#218578,#218586,#218594)); +#218577 = ORIENTED_EDGE('',*,*,#218555,.T.); +#218578 = ORIENTED_EDGE('',*,*,#218579,.T.); +#218579 = EDGE_CURVE('',#218547,#218580,#218582,.T.); +#218580 = VERTEX_POINT('',#218581); +#218581 = CARTESIAN_POINT('',(147.9,-67.968053,1.545)); +#218582 = LINE('',#218583,#218584); +#218583 = CARTESIAN_POINT('',(147.898079,-67.690491,1.545)); +#218584 = VECTOR('',#218585,1.); +#218585 = DIRECTION('',(6.920810463239E-03,-0.999976050904,0.)); +#218586 = ORIENTED_EDGE('',*,*,#218587,.F.); +#218587 = EDGE_CURVE('',#218588,#218580,#218590,.T.); +#218588 = VERTEX_POINT('',#218589); +#218589 = CARTESIAN_POINT('',(147.9,-67.968053,1.51)); +#218590 = LINE('',#218591,#218592); +#218591 = CARTESIAN_POINT('',(147.9,-67.968053,1.51)); +#218592 = VECTOR('',#218593,1.); +#218593 = DIRECTION('',(0.,0.,1.)); +#218594 = ORIENTED_EDGE('',*,*,#218595,.F.); +#218595 = EDGE_CURVE('',#218556,#218588,#218596,.T.); +#218596 = LINE('',#218597,#218598); +#218597 = CARTESIAN_POINT('',(147.898079,-67.690491,1.51)); +#218598 = VECTOR('',#218599,1.); +#218599 = DIRECTION('',(6.920810463239E-03,-0.999976050904,0.)); +#218600 = PLANE('',#218601); +#218601 = AXIS2_PLACEMENT_3D('',#218602,#218603,#218604); +#218602 = CARTESIAN_POINT('',(147.898079,-67.690491,1.51)); +#218603 = DIRECTION('',(0.999976050904,6.920810463239E-03,-0.)); +#218604 = DIRECTION('',(6.920810463239E-03,-0.999976050904,0.)); +#218605 = ADVANCED_FACE('',(#218606),#218631,.T.); +#218606 = FACE_BOUND('',#218607,.T.); +#218607 = EDGE_LOOP('',(#218608,#218609,#218617,#218625)); +#218608 = ORIENTED_EDGE('',*,*,#218587,.T.); +#218609 = ORIENTED_EDGE('',*,*,#218610,.T.); +#218610 = EDGE_CURVE('',#218580,#218611,#218613,.T.); +#218611 = VERTEX_POINT('',#218612); +#218612 = CARTESIAN_POINT('',(147.921242,-67.976852,1.545)); +#218613 = LINE('',#218614,#218615); +#218614 = CARTESIAN_POINT('',(147.9,-67.968053,1.545)); +#218615 = VECTOR('',#218616,1.); +#218616 = DIRECTION('',(0.923875295954,-0.382693660159,0.)); +#218617 = ORIENTED_EDGE('',*,*,#218618,.F.); +#218618 = EDGE_CURVE('',#218619,#218611,#218621,.T.); +#218619 = VERTEX_POINT('',#218620); +#218620 = CARTESIAN_POINT('',(147.921242,-67.976852,1.51)); +#218621 = LINE('',#218622,#218623); +#218622 = CARTESIAN_POINT('',(147.921242,-67.976852,1.51)); +#218623 = VECTOR('',#218624,1.); +#218624 = DIRECTION('',(0.,0.,1.)); +#218625 = ORIENTED_EDGE('',*,*,#218626,.F.); +#218626 = EDGE_CURVE('',#218588,#218619,#218627,.T.); +#218627 = LINE('',#218628,#218629); +#218628 = CARTESIAN_POINT('',(147.9,-67.968053,1.51)); +#218629 = VECTOR('',#218630,1.); +#218630 = DIRECTION('',(0.923875295954,-0.382693660159,0.)); +#218631 = PLANE('',#218632); +#218632 = AXIS2_PLACEMENT_3D('',#218633,#218634,#218635); +#218633 = CARTESIAN_POINT('',(147.9,-67.968053,1.51)); +#218634 = DIRECTION('',(0.382693660159,0.923875295954,-0.)); +#218635 = DIRECTION('',(0.923875295954,-0.382693660159,0.)); +#218636 = ADVANCED_FACE('',(#218637),#218662,.T.); +#218637 = FACE_BOUND('',#218638,.T.); +#218638 = EDGE_LOOP('',(#218639,#218640,#218648,#218656)); +#218639 = ORIENTED_EDGE('',*,*,#218618,.T.); +#218640 = ORIENTED_EDGE('',*,*,#218641,.T.); +#218641 = EDGE_CURVE('',#218611,#218642,#218644,.T.); +#218642 = VERTEX_POINT('',#218643); +#218643 = CARTESIAN_POINT('',(148.020371,-68.073264,1.545)); +#218644 = LINE('',#218645,#218646); +#218645 = CARTESIAN_POINT('',(147.921242,-67.976852,1.545)); +#218646 = VECTOR('',#218647,1.); +#218647 = DIRECTION('',(0.71686268011,-0.697214384436,0.)); +#218648 = ORIENTED_EDGE('',*,*,#218649,.F.); +#218649 = EDGE_CURVE('',#218650,#218642,#218652,.T.); +#218650 = VERTEX_POINT('',#218651); +#218651 = CARTESIAN_POINT('',(148.020371,-68.073264,1.51)); +#218652 = LINE('',#218653,#218654); +#218653 = CARTESIAN_POINT('',(148.020371,-68.073264,1.51)); +#218654 = VECTOR('',#218655,1.); +#218655 = DIRECTION('',(0.,0.,1.)); +#218656 = ORIENTED_EDGE('',*,*,#218657,.F.); +#218657 = EDGE_CURVE('',#218619,#218650,#218658,.T.); +#218658 = LINE('',#218659,#218660); +#218659 = CARTESIAN_POINT('',(147.921242,-67.976852,1.51)); +#218660 = VECTOR('',#218661,1.); +#218661 = DIRECTION('',(0.71686268011,-0.697214384436,0.)); +#218662 = PLANE('',#218663); +#218663 = AXIS2_PLACEMENT_3D('',#218664,#218665,#218666); +#218664 = CARTESIAN_POINT('',(147.921242,-67.976852,1.51)); +#218665 = DIRECTION('',(0.697214384436,0.71686268011,-0.)); +#218666 = DIRECTION('',(0.71686268011,-0.697214384436,0.)); +#218667 = ADVANCED_FACE('',(#218668),#218693,.T.); +#218668 = FACE_BOUND('',#218669,.T.); +#218669 = EDGE_LOOP('',(#218670,#218671,#218679,#218687)); +#218670 = ORIENTED_EDGE('',*,*,#218649,.T.); +#218671 = ORIENTED_EDGE('',*,*,#218672,.T.); +#218672 = EDGE_CURVE('',#218642,#218673,#218675,.T.); +#218673 = VERTEX_POINT('',#218674); +#218674 = CARTESIAN_POINT('',(148.044188,-68.089289,1.545)); +#218675 = LINE('',#218676,#218677); +#218676 = CARTESIAN_POINT('',(148.020371,-68.073264,1.545)); +#218677 = VECTOR('',#218678,1.); +#218678 = DIRECTION('',(0.829679280751,-0.55824035244,0.)); +#218679 = ORIENTED_EDGE('',*,*,#218680,.F.); +#218680 = EDGE_CURVE('',#218681,#218673,#218683,.T.); +#218681 = VERTEX_POINT('',#218682); +#218682 = CARTESIAN_POINT('',(148.044188,-68.089289,1.51)); +#218683 = LINE('',#218684,#218685); +#218684 = CARTESIAN_POINT('',(148.044188,-68.089289,1.51)); +#218685 = VECTOR('',#218686,1.); +#218686 = DIRECTION('',(0.,0.,1.)); +#218687 = ORIENTED_EDGE('',*,*,#218688,.F.); +#218688 = EDGE_CURVE('',#218650,#218681,#218689,.T.); +#218689 = LINE('',#218690,#218691); +#218690 = CARTESIAN_POINT('',(148.020371,-68.073264,1.51)); +#218691 = VECTOR('',#218692,1.); +#218692 = DIRECTION('',(0.829679280751,-0.55824035244,0.)); +#218693 = PLANE('',#218694); +#218694 = AXIS2_PLACEMENT_3D('',#218695,#218696,#218697); +#218695 = CARTESIAN_POINT('',(148.020371,-68.073264,1.51)); +#218696 = DIRECTION('',(0.55824035244,0.829679280751,-0.)); +#218697 = DIRECTION('',(0.829679280751,-0.55824035244,0.)); +#218698 = ADVANCED_FACE('',(#218699),#218724,.T.); +#218699 = FACE_BOUND('',#218700,.T.); +#218700 = EDGE_LOOP('',(#218701,#218702,#218710,#218718)); +#218701 = ORIENTED_EDGE('',*,*,#218680,.T.); +#218702 = ORIENTED_EDGE('',*,*,#218703,.T.); +#218703 = EDGE_CURVE('',#218673,#218704,#218706,.T.); +#218704 = VERTEX_POINT('',#218705); +#218705 = CARTESIAN_POINT('',(148.483147,-68.530965,1.545)); +#218706 = LINE('',#218707,#218708); +#218707 = CARTESIAN_POINT('',(148.044188,-68.089289,1.545)); +#218708 = VECTOR('',#218709,1.); +#218709 = DIRECTION('',(0.704921808198,-0.709285023334,0.)); +#218710 = ORIENTED_EDGE('',*,*,#218711,.F.); +#218711 = EDGE_CURVE('',#218712,#218704,#218714,.T.); +#218712 = VERTEX_POINT('',#218713); +#218713 = CARTESIAN_POINT('',(148.483147,-68.530965,1.51)); +#218714 = LINE('',#218715,#218716); +#218715 = CARTESIAN_POINT('',(148.483147,-68.530965,1.51)); +#218716 = VECTOR('',#218717,1.); +#218717 = DIRECTION('',(0.,0.,1.)); +#218718 = ORIENTED_EDGE('',*,*,#218719,.F.); +#218719 = EDGE_CURVE('',#218681,#218712,#218720,.T.); +#218720 = LINE('',#218721,#218722); +#218721 = CARTESIAN_POINT('',(148.044188,-68.089289,1.51)); +#218722 = VECTOR('',#218723,1.); +#218723 = DIRECTION('',(0.704921808198,-0.709285023334,0.)); +#218724 = PLANE('',#218725); +#218725 = AXIS2_PLACEMENT_3D('',#218726,#218727,#218728); +#218726 = CARTESIAN_POINT('',(148.044188,-68.089289,1.51)); +#218727 = DIRECTION('',(0.709285023334,0.704921808198,-0.)); +#218728 = DIRECTION('',(0.704921808198,-0.709285023334,0.)); +#218729 = ADVANCED_FACE('',(#218730),#218755,.T.); +#218730 = FACE_BOUND('',#218731,.T.); +#218731 = EDGE_LOOP('',(#218732,#218733,#218741,#218749)); +#218732 = ORIENTED_EDGE('',*,*,#218711,.T.); +#218733 = ORIENTED_EDGE('',*,*,#218734,.T.); +#218734 = EDGE_CURVE('',#218704,#218735,#218737,.T.); +#218735 = VERTEX_POINT('',#218736); +#218736 = CARTESIAN_POINT('',(148.498079,-68.567013,1.545)); +#218737 = LINE('',#218738,#218739); +#218738 = CARTESIAN_POINT('',(148.483147,-68.530965,1.545)); +#218739 = VECTOR('',#218740,1.); +#218740 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218741 = ORIENTED_EDGE('',*,*,#218742,.F.); +#218742 = EDGE_CURVE('',#218743,#218735,#218745,.T.); +#218743 = VERTEX_POINT('',#218744); +#218744 = CARTESIAN_POINT('',(148.498079,-68.567013,1.51)); +#218745 = LINE('',#218746,#218747); +#218746 = CARTESIAN_POINT('',(148.498079,-68.567013,1.51)); +#218747 = VECTOR('',#218748,1.); +#218748 = DIRECTION('',(0.,0.,1.)); +#218749 = ORIENTED_EDGE('',*,*,#218750,.F.); +#218750 = EDGE_CURVE('',#218712,#218743,#218751,.T.); +#218751 = LINE('',#218752,#218753); +#218752 = CARTESIAN_POINT('',(148.483147,-68.530965,1.51)); +#218753 = VECTOR('',#218754,1.); +#218754 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218755 = PLANE('',#218756); +#218756 = AXIS2_PLACEMENT_3D('',#218757,#218758,#218759); +#218757 = CARTESIAN_POINT('',(148.483147,-68.530965,1.51)); +#218758 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#218759 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218760 = ADVANCED_FACE('',(#218761),#218786,.T.); +#218761 = FACE_BOUND('',#218762,.T.); +#218762 = EDGE_LOOP('',(#218763,#218764,#218772,#218780)); +#218763 = ORIENTED_EDGE('',*,*,#218742,.T.); +#218764 = ORIENTED_EDGE('',*,*,#218765,.T.); +#218765 = EDGE_CURVE('',#218735,#218766,#218768,.T.); +#218766 = VERTEX_POINT('',#218767); +#218767 = CARTESIAN_POINT('',(148.5,-73.158578,1.545)); +#218768 = LINE('',#218769,#218770); +#218769 = CARTESIAN_POINT('',(148.498079,-68.567013,1.545)); +#218770 = VECTOR('',#218771,1.); +#218771 = DIRECTION('',(4.183758330516E-04,-0.999999912481,0.)); +#218772 = ORIENTED_EDGE('',*,*,#218773,.F.); +#218773 = EDGE_CURVE('',#218774,#218766,#218776,.T.); +#218774 = VERTEX_POINT('',#218775); +#218775 = CARTESIAN_POINT('',(148.5,-73.158578,1.51)); +#218776 = LINE('',#218777,#218778); +#218777 = CARTESIAN_POINT('',(148.5,-73.158578,1.51)); +#218778 = VECTOR('',#218779,1.); +#218779 = DIRECTION('',(0.,0.,1.)); +#218780 = ORIENTED_EDGE('',*,*,#218781,.F.); +#218781 = EDGE_CURVE('',#218743,#218774,#218782,.T.); +#218782 = LINE('',#218783,#218784); +#218783 = CARTESIAN_POINT('',(148.498079,-68.567013,1.51)); +#218784 = VECTOR('',#218785,1.); +#218785 = DIRECTION('',(4.183758330516E-04,-0.999999912481,0.)); +#218786 = PLANE('',#218787); +#218787 = AXIS2_PLACEMENT_3D('',#218788,#218789,#218790); +#218788 = CARTESIAN_POINT('',(148.498079,-68.567013,1.51)); +#218789 = DIRECTION('',(0.999999912481,4.183758330516E-04,-0.)); +#218790 = DIRECTION('',(4.183758330516E-04,-0.999999912481,0.)); +#218791 = ADVANCED_FACE('',(#218792),#218817,.T.); +#218792 = FACE_BOUND('',#218793,.T.); +#218793 = EDGE_LOOP('',(#218794,#218795,#218803,#218811)); +#218794 = ORIENTED_EDGE('',*,*,#218773,.T.); +#218795 = ORIENTED_EDGE('',*,*,#218796,.T.); +#218796 = EDGE_CURVE('',#218766,#218797,#218799,.T.); +#218797 = VERTEX_POINT('',#218798); +#218798 = CARTESIAN_POINT('',(148.597156,-73.255735,1.545)); +#218799 = LINE('',#218800,#218801); +#218800 = CARTESIAN_POINT('',(148.5,-73.158578,1.545)); +#218801 = VECTOR('',#218802,1.); +#218802 = DIRECTION('',(0.707103142168,-0.707110420186,0.)); +#218803 = ORIENTED_EDGE('',*,*,#218804,.F.); +#218804 = EDGE_CURVE('',#218805,#218797,#218807,.T.); +#218805 = VERTEX_POINT('',#218806); +#218806 = CARTESIAN_POINT('',(148.597156,-73.255735,1.51)); +#218807 = LINE('',#218808,#218809); +#218808 = CARTESIAN_POINT('',(148.597156,-73.255735,1.51)); +#218809 = VECTOR('',#218810,1.); +#218810 = DIRECTION('',(0.,0.,1.)); +#218811 = ORIENTED_EDGE('',*,*,#218812,.F.); +#218812 = EDGE_CURVE('',#218774,#218805,#218813,.T.); +#218813 = LINE('',#218814,#218815); +#218814 = CARTESIAN_POINT('',(148.5,-73.158578,1.51)); +#218815 = VECTOR('',#218816,1.); +#218816 = DIRECTION('',(0.707103142168,-0.707110420186,0.)); +#218817 = PLANE('',#218818); +#218818 = AXIS2_PLACEMENT_3D('',#218819,#218820,#218821); +#218819 = CARTESIAN_POINT('',(148.5,-73.158578,1.51)); +#218820 = DIRECTION('',(0.707110420186,0.707103142168,-0.)); +#218821 = DIRECTION('',(0.707103142168,-0.707110420186,0.)); +#218822 = ADVANCED_FACE('',(#218823),#218848,.T.); +#218823 = FACE_BOUND('',#218824,.T.); +#218824 = EDGE_LOOP('',(#218825,#218826,#218834,#218842)); +#218825 = ORIENTED_EDGE('',*,*,#218804,.T.); +#218826 = ORIENTED_EDGE('',*,*,#218827,.T.); +#218827 = EDGE_CURVE('',#218797,#218828,#218830,.T.); +#218828 = VERTEX_POINT('',#218829); +#218829 = CARTESIAN_POINT('',(148.812303,-73.257656,1.545)); +#218830 = LINE('',#218831,#218832); +#218831 = CARTESIAN_POINT('',(148.597156,-73.255735,1.545)); +#218832 = VECTOR('',#218833,1.); +#218833 = DIRECTION('',(0.999960140837,-8.928423034219E-03,0.)); +#218834 = ORIENTED_EDGE('',*,*,#218835,.F.); +#218835 = EDGE_CURVE('',#218836,#218828,#218838,.T.); +#218836 = VERTEX_POINT('',#218837); +#218837 = CARTESIAN_POINT('',(148.812303,-73.257656,1.51)); +#218838 = LINE('',#218839,#218840); +#218839 = CARTESIAN_POINT('',(148.812303,-73.257656,1.51)); +#218840 = VECTOR('',#218841,1.); +#218841 = DIRECTION('',(0.,0.,1.)); +#218842 = ORIENTED_EDGE('',*,*,#218843,.F.); +#218843 = EDGE_CURVE('',#218805,#218836,#218844,.T.); +#218844 = LINE('',#218845,#218846); +#218845 = CARTESIAN_POINT('',(148.597156,-73.255735,1.51)); +#218846 = VECTOR('',#218847,1.); +#218847 = DIRECTION('',(0.999960140837,-8.928423034219E-03,0.)); +#218848 = PLANE('',#218849); +#218849 = AXIS2_PLACEMENT_3D('',#218850,#218851,#218852); +#218850 = CARTESIAN_POINT('',(148.597156,-73.255735,1.51)); +#218851 = DIRECTION('',(8.928423034219E-03,0.999960140837,-0.)); +#218852 = DIRECTION('',(0.999960140837,-8.928423034219E-03,0.)); +#218853 = ADVANCED_FACE('',(#218854),#218879,.T.); +#218854 = FACE_BOUND('',#218855,.T.); +#218855 = EDGE_LOOP('',(#218856,#218857,#218865,#218873)); +#218856 = ORIENTED_EDGE('',*,*,#218835,.T.); +#218857 = ORIENTED_EDGE('',*,*,#218858,.T.); +#218858 = EDGE_CURVE('',#218828,#218859,#218861,.T.); +#218859 = VERTEX_POINT('',#218860); +#218860 = CARTESIAN_POINT('',(148.848351,-73.272588,1.545)); +#218861 = LINE('',#218862,#218863); +#218862 = CARTESIAN_POINT('',(148.812303,-73.257656,1.545)); +#218863 = VECTOR('',#218864,1.); +#218864 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#218865 = ORIENTED_EDGE('',*,*,#218866,.F.); +#218866 = EDGE_CURVE('',#218867,#218859,#218869,.T.); +#218867 = VERTEX_POINT('',#218868); +#218868 = CARTESIAN_POINT('',(148.848351,-73.272588,1.51)); +#218869 = LINE('',#218870,#218871); +#218870 = CARTESIAN_POINT('',(148.848351,-73.272588,1.51)); +#218871 = VECTOR('',#218872,1.); +#218872 = DIRECTION('',(0.,0.,1.)); +#218873 = ORIENTED_EDGE('',*,*,#218874,.F.); +#218874 = EDGE_CURVE('',#218836,#218867,#218875,.T.); +#218875 = LINE('',#218876,#218877); +#218876 = CARTESIAN_POINT('',(148.812303,-73.257656,1.51)); +#218877 = VECTOR('',#218878,1.); +#218878 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#218879 = PLANE('',#218880); +#218880 = AXIS2_PLACEMENT_3D('',#218881,#218882,#218883); +#218881 = CARTESIAN_POINT('',(148.812303,-73.257656,1.51)); +#218882 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#218883 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#218884 = ADVANCED_FACE('',(#218885),#218910,.T.); +#218885 = FACE_BOUND('',#218886,.T.); +#218886 = EDGE_LOOP('',(#218887,#218888,#218896,#218904)); +#218887 = ORIENTED_EDGE('',*,*,#218866,.T.); +#218888 = ORIENTED_EDGE('',*,*,#218889,.T.); +#218889 = EDGE_CURVE('',#218859,#218890,#218892,.T.); +#218890 = VERTEX_POINT('',#218891); +#218891 = CARTESIAN_POINT('',(149.227412,-73.651649,1.545)); +#218892 = LINE('',#218893,#218894); +#218893 = CARTESIAN_POINT('',(148.848351,-73.272588,1.545)); +#218894 = VECTOR('',#218895,1.); +#218895 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#218896 = ORIENTED_EDGE('',*,*,#218897,.F.); +#218897 = EDGE_CURVE('',#218898,#218890,#218900,.T.); +#218898 = VERTEX_POINT('',#218899); +#218899 = CARTESIAN_POINT('',(149.227412,-73.651649,1.51)); +#218900 = LINE('',#218901,#218902); +#218901 = CARTESIAN_POINT('',(149.227412,-73.651649,1.51)); +#218902 = VECTOR('',#218903,1.); +#218903 = DIRECTION('',(0.,0.,1.)); +#218904 = ORIENTED_EDGE('',*,*,#218905,.F.); +#218905 = EDGE_CURVE('',#218867,#218898,#218906,.T.); +#218906 = LINE('',#218907,#218908); +#218907 = CARTESIAN_POINT('',(148.848351,-73.272588,1.51)); +#218908 = VECTOR('',#218909,1.); +#218909 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#218910 = PLANE('',#218911); +#218911 = AXIS2_PLACEMENT_3D('',#218912,#218913,#218914); +#218912 = CARTESIAN_POINT('',(148.848351,-73.272588,1.51)); +#218913 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#218914 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#218915 = ADVANCED_FACE('',(#218916),#218941,.T.); +#218916 = FACE_BOUND('',#218917,.T.); +#218917 = EDGE_LOOP('',(#218918,#218919,#218927,#218935)); +#218918 = ORIENTED_EDGE('',*,*,#218897,.T.); +#218919 = ORIENTED_EDGE('',*,*,#218920,.T.); +#218920 = EDGE_CURVE('',#218890,#218921,#218923,.T.); +#218921 = VERTEX_POINT('',#218922); +#218922 = CARTESIAN_POINT('',(149.242344,-73.687697,1.545)); +#218923 = LINE('',#218924,#218925); +#218924 = CARTESIAN_POINT('',(149.227412,-73.651649,1.545)); +#218925 = VECTOR('',#218926,1.); +#218926 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218927 = ORIENTED_EDGE('',*,*,#218928,.F.); +#218928 = EDGE_CURVE('',#218929,#218921,#218931,.T.); +#218929 = VERTEX_POINT('',#218930); +#218930 = CARTESIAN_POINT('',(149.242344,-73.687697,1.51)); +#218931 = LINE('',#218932,#218933); +#218932 = CARTESIAN_POINT('',(149.242344,-73.687697,1.51)); +#218933 = VECTOR('',#218934,1.); +#218934 = DIRECTION('',(0.,0.,1.)); +#218935 = ORIENTED_EDGE('',*,*,#218936,.F.); +#218936 = EDGE_CURVE('',#218898,#218929,#218937,.T.); +#218937 = LINE('',#218938,#218939); +#218938 = CARTESIAN_POINT('',(149.227412,-73.651649,1.51)); +#218939 = VECTOR('',#218940,1.); +#218940 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218941 = PLANE('',#218942); +#218942 = AXIS2_PLACEMENT_3D('',#218943,#218944,#218945); +#218943 = CARTESIAN_POINT('',(149.227412,-73.651649,1.51)); +#218944 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#218945 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#218946 = ADVANCED_FACE('',(#218947),#218972,.T.); +#218947 = FACE_BOUND('',#218948,.T.); +#218948 = EDGE_LOOP('',(#218949,#218950,#218958,#218966)); +#218949 = ORIENTED_EDGE('',*,*,#218928,.T.); +#218950 = ORIENTED_EDGE('',*,*,#218951,.T.); +#218951 = EDGE_CURVE('',#218921,#218952,#218954,.T.); +#218952 = VERTEX_POINT('',#218953); +#218953 = CARTESIAN_POINT('',(149.244265,-73.902843,1.545)); +#218954 = LINE('',#218955,#218956); +#218955 = CARTESIAN_POINT('',(149.242344,-73.687697,1.545)); +#218956 = VECTOR('',#218957,1.); +#218957 = DIRECTION('',(8.928464530345E-03,-0.999960140466,0.)); +#218958 = ORIENTED_EDGE('',*,*,#218959,.F.); +#218959 = EDGE_CURVE('',#218960,#218952,#218962,.T.); +#218960 = VERTEX_POINT('',#218961); +#218961 = CARTESIAN_POINT('',(149.244265,-73.902843,1.51)); +#218962 = LINE('',#218963,#218964); +#218963 = CARTESIAN_POINT('',(149.244265,-73.902843,1.51)); +#218964 = VECTOR('',#218965,1.); +#218965 = DIRECTION('',(0.,0.,1.)); +#218966 = ORIENTED_EDGE('',*,*,#218967,.F.); +#218967 = EDGE_CURVE('',#218929,#218960,#218968,.T.); +#218968 = LINE('',#218969,#218970); +#218969 = CARTESIAN_POINT('',(149.242344,-73.687697,1.51)); +#218970 = VECTOR('',#218971,1.); +#218971 = DIRECTION('',(8.928464530345E-03,-0.999960140466,0.)); +#218972 = PLANE('',#218973); +#218973 = AXIS2_PLACEMENT_3D('',#218974,#218975,#218976); +#218974 = CARTESIAN_POINT('',(149.242344,-73.687697,1.51)); +#218975 = DIRECTION('',(0.999960140466,8.928464530345E-03,-0.)); +#218976 = DIRECTION('',(8.928464530345E-03,-0.999960140466,0.)); +#218977 = ADVANCED_FACE('',(#218978),#219003,.T.); +#218978 = FACE_BOUND('',#218979,.T.); +#218979 = EDGE_LOOP('',(#218980,#218981,#218989,#218997)); +#218980 = ORIENTED_EDGE('',*,*,#218959,.T.); +#218981 = ORIENTED_EDGE('',*,*,#218982,.T.); +#218982 = EDGE_CURVE('',#218952,#218983,#218985,.T.); +#218983 = VERTEX_POINT('',#218984); +#218984 = CARTESIAN_POINT('',(149.397156,-74.055735,1.545)); +#218985 = LINE('',#218986,#218987); +#218986 = CARTESIAN_POINT('',(149.244265,-73.902843,1.545)); +#218987 = VECTOR('',#218988,1.); +#218988 = DIRECTION('',(0.707104468736,-0.707109093629,0.)); +#218989 = ORIENTED_EDGE('',*,*,#218990,.F.); +#218990 = EDGE_CURVE('',#218991,#218983,#218993,.T.); +#218991 = VERTEX_POINT('',#218992); +#218992 = CARTESIAN_POINT('',(149.397156,-74.055735,1.51)); +#218993 = LINE('',#218994,#218995); +#218994 = CARTESIAN_POINT('',(149.397156,-74.055735,1.51)); +#218995 = VECTOR('',#218996,1.); +#218996 = DIRECTION('',(0.,0.,1.)); +#218997 = ORIENTED_EDGE('',*,*,#218998,.F.); +#218998 = EDGE_CURVE('',#218960,#218991,#218999,.T.); +#218999 = LINE('',#219000,#219001); +#219000 = CARTESIAN_POINT('',(149.244265,-73.902843,1.51)); +#219001 = VECTOR('',#219002,1.); +#219002 = DIRECTION('',(0.707104468736,-0.707109093629,0.)); +#219003 = PLANE('',#219004); +#219004 = AXIS2_PLACEMENT_3D('',#219005,#219006,#219007); +#219005 = CARTESIAN_POINT('',(149.244265,-73.902843,1.51)); +#219006 = DIRECTION('',(0.707109093629,0.707104468736,-0.)); +#219007 = DIRECTION('',(0.707104468736,-0.707109093629,0.)); +#219008 = ADVANCED_FACE('',(#219009),#219034,.T.); +#219009 = FACE_BOUND('',#219010,.T.); +#219010 = EDGE_LOOP('',(#219011,#219012,#219020,#219028)); +#219011 = ORIENTED_EDGE('',*,*,#218990,.T.); +#219012 = ORIENTED_EDGE('',*,*,#219013,.T.); +#219013 = EDGE_CURVE('',#218983,#219014,#219016,.T.); +#219014 = VERTEX_POINT('',#219015); +#219015 = CARTESIAN_POINT('',(149.629459,-74.057656,1.545)); +#219016 = LINE('',#219017,#219018); +#219017 = CARTESIAN_POINT('',(149.397156,-74.055735,1.545)); +#219018 = VECTOR('',#219019,1.); +#219019 = DIRECTION('',(0.999965810494,-8.26908960261E-03,0.)); +#219020 = ORIENTED_EDGE('',*,*,#219021,.F.); +#219021 = EDGE_CURVE('',#219022,#219014,#219024,.T.); +#219022 = VERTEX_POINT('',#219023); +#219023 = CARTESIAN_POINT('',(149.629459,-74.057656,1.51)); +#219024 = LINE('',#219025,#219026); +#219025 = CARTESIAN_POINT('',(149.629459,-74.057656,1.51)); +#219026 = VECTOR('',#219027,1.); +#219027 = DIRECTION('',(0.,0.,1.)); +#219028 = ORIENTED_EDGE('',*,*,#219029,.F.); +#219029 = EDGE_CURVE('',#218991,#219022,#219030,.T.); +#219030 = LINE('',#219031,#219032); +#219031 = CARTESIAN_POINT('',(149.397156,-74.055735,1.51)); +#219032 = VECTOR('',#219033,1.); +#219033 = DIRECTION('',(0.999965810494,-8.26908960261E-03,0.)); +#219034 = PLANE('',#219035); +#219035 = AXIS2_PLACEMENT_3D('',#219036,#219037,#219038); +#219036 = CARTESIAN_POINT('',(149.397156,-74.055735,1.51)); +#219037 = DIRECTION('',(8.26908960261E-03,0.999965810494,-0.)); +#219038 = DIRECTION('',(0.999965810494,-8.26908960261E-03,0.)); +#219039 = ADVANCED_FACE('',(#219040),#219065,.T.); +#219040 = FACE_BOUND('',#219041,.T.); +#219041 = EDGE_LOOP('',(#219042,#219043,#219051,#219059)); +#219042 = ORIENTED_EDGE('',*,*,#219021,.T.); +#219043 = ORIENTED_EDGE('',*,*,#219044,.T.); +#219044 = EDGE_CURVE('',#219014,#219045,#219047,.T.); +#219045 = VERTEX_POINT('',#219046); +#219046 = CARTESIAN_POINT('',(149.665507,-74.072588,1.545)); +#219047 = LINE('',#219048,#219049); +#219048 = CARTESIAN_POINT('',(149.629459,-74.057656,1.545)); +#219049 = VECTOR('',#219050,1.); +#219050 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219051 = ORIENTED_EDGE('',*,*,#219052,.F.); +#219052 = EDGE_CURVE('',#219053,#219045,#219055,.T.); +#219053 = VERTEX_POINT('',#219054); +#219054 = CARTESIAN_POINT('',(149.665507,-74.072588,1.51)); +#219055 = LINE('',#219056,#219057); +#219056 = CARTESIAN_POINT('',(149.665507,-74.072588,1.51)); +#219057 = VECTOR('',#219058,1.); +#219058 = DIRECTION('',(0.,0.,1.)); +#219059 = ORIENTED_EDGE('',*,*,#219060,.F.); +#219060 = EDGE_CURVE('',#219022,#219053,#219061,.T.); +#219061 = LINE('',#219062,#219063); +#219062 = CARTESIAN_POINT('',(149.629459,-74.057656,1.51)); +#219063 = VECTOR('',#219064,1.); +#219064 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219065 = PLANE('',#219066); +#219066 = AXIS2_PLACEMENT_3D('',#219067,#219068,#219069); +#219067 = CARTESIAN_POINT('',(149.629459,-74.057656,1.51)); +#219068 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#219069 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219070 = ADVANCED_FACE('',(#219071),#219096,.T.); +#219071 = FACE_BOUND('',#219072,.T.); +#219072 = EDGE_LOOP('',(#219073,#219074,#219082,#219090)); +#219073 = ORIENTED_EDGE('',*,*,#219052,.T.); +#219074 = ORIENTED_EDGE('',*,*,#219075,.T.); +#219075 = EDGE_CURVE('',#219045,#219076,#219078,.T.); +#219076 = VERTEX_POINT('',#219077); +#219077 = CARTESIAN_POINT('',(150.052842,-74.457206,1.545)); +#219078 = LINE('',#219079,#219080); +#219079 = CARTESIAN_POINT('',(149.665507,-74.072588,1.545)); +#219080 = VECTOR('',#219081,1.); +#219081 = DIRECTION('',(0.709591150403,-0.704613652486,0.)); +#219082 = ORIENTED_EDGE('',*,*,#219083,.F.); +#219083 = EDGE_CURVE('',#219084,#219076,#219086,.T.); +#219084 = VERTEX_POINT('',#219085); +#219085 = CARTESIAN_POINT('',(150.052842,-74.457206,1.51)); +#219086 = LINE('',#219087,#219088); +#219087 = CARTESIAN_POINT('',(150.052842,-74.457206,1.51)); +#219088 = VECTOR('',#219089,1.); +#219089 = DIRECTION('',(0.,0.,1.)); +#219090 = ORIENTED_EDGE('',*,*,#219091,.F.); +#219091 = EDGE_CURVE('',#219053,#219084,#219092,.T.); +#219092 = LINE('',#219093,#219094); +#219093 = CARTESIAN_POINT('',(149.665507,-74.072588,1.51)); +#219094 = VECTOR('',#219095,1.); +#219095 = DIRECTION('',(0.709591150403,-0.704613652486,0.)); +#219096 = PLANE('',#219097); +#219097 = AXIS2_PLACEMENT_3D('',#219098,#219099,#219100); +#219098 = CARTESIAN_POINT('',(149.665507,-74.072588,1.51)); +#219099 = DIRECTION('',(0.704613652486,0.709591150403,-0.)); +#219100 = DIRECTION('',(0.709591150403,-0.704613652486,0.)); +#219101 = ADVANCED_FACE('',(#219102),#219127,.T.); +#219102 = FACE_BOUND('',#219103,.T.); +#219103 = EDGE_LOOP('',(#219104,#219105,#219113,#219121)); +#219104 = ORIENTED_EDGE('',*,*,#219083,.T.); +#219105 = ORIENTED_EDGE('',*,*,#219106,.T.); +#219106 = EDGE_CURVE('',#219076,#219107,#219109,.T.); +#219107 = VERTEX_POINT('',#219108); +#219108 = CARTESIAN_POINT('',(150.195913,-74.316853,1.545)); +#219109 = LINE('',#219110,#219111); +#219110 = CARTESIAN_POINT('',(150.052842,-74.457206,1.545)); +#219111 = VECTOR('',#219112,1.); +#219112 = DIRECTION('',(0.713855020687,0.700293516635,0.)); +#219113 = ORIENTED_EDGE('',*,*,#219114,.F.); +#219114 = EDGE_CURVE('',#219115,#219107,#219117,.T.); +#219115 = VERTEX_POINT('',#219116); +#219116 = CARTESIAN_POINT('',(150.195913,-74.316853,1.51)); +#219117 = LINE('',#219118,#219119); +#219118 = CARTESIAN_POINT('',(150.195913,-74.316853,1.51)); +#219119 = VECTOR('',#219120,1.); +#219120 = DIRECTION('',(0.,0.,1.)); +#219121 = ORIENTED_EDGE('',*,*,#219122,.F.); +#219122 = EDGE_CURVE('',#219084,#219115,#219123,.T.); +#219123 = LINE('',#219124,#219125); +#219124 = CARTESIAN_POINT('',(150.052842,-74.457206,1.51)); +#219125 = VECTOR('',#219126,1.); +#219126 = DIRECTION('',(0.713855020687,0.700293516635,0.)); +#219127 = PLANE('',#219128); +#219128 = AXIS2_PLACEMENT_3D('',#219129,#219130,#219131); +#219129 = CARTESIAN_POINT('',(150.052842,-74.457206,1.51)); +#219130 = DIRECTION('',(-0.700293516635,0.713855020687,0.)); +#219131 = DIRECTION('',(0.713855020687,0.700293516635,0.)); +#219132 = ADVANCED_FACE('',(#219133),#219158,.T.); +#219133 = FACE_BOUND('',#219134,.T.); +#219134 = EDGE_LOOP('',(#219135,#219136,#219144,#219152)); +#219135 = ORIENTED_EDGE('',*,*,#219114,.T.); +#219136 = ORIENTED_EDGE('',*,*,#219137,.T.); +#219137 = EDGE_CURVE('',#219107,#219138,#219140,.T.); +#219138 = VERTEX_POINT('',#219139); +#219139 = CARTESIAN_POINT('',(150.231962,-74.301921,1.545)); +#219140 = LINE('',#219141,#219142); +#219141 = CARTESIAN_POINT('',(150.195913,-74.316853,1.545)); +#219142 = VECTOR('',#219143,1.); +#219143 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#219144 = ORIENTED_EDGE('',*,*,#219145,.F.); +#219145 = EDGE_CURVE('',#219146,#219138,#219148,.T.); +#219146 = VERTEX_POINT('',#219147); +#219147 = CARTESIAN_POINT('',(150.231962,-74.301921,1.51)); +#219148 = LINE('',#219149,#219150); +#219149 = CARTESIAN_POINT('',(150.231962,-74.301921,1.51)); +#219150 = VECTOR('',#219151,1.); +#219151 = DIRECTION('',(0.,0.,1.)); +#219152 = ORIENTED_EDGE('',*,*,#219153,.F.); +#219153 = EDGE_CURVE('',#219115,#219146,#219154,.T.); +#219154 = LINE('',#219155,#219156); +#219155 = CARTESIAN_POINT('',(150.195913,-74.316853,1.51)); +#219156 = VECTOR('',#219157,1.); +#219157 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#219158 = PLANE('',#219159); +#219159 = AXIS2_PLACEMENT_3D('',#219160,#219161,#219162); +#219160 = CARTESIAN_POINT('',(150.195913,-74.316853,1.51)); +#219161 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#219162 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#219163 = ADVANCED_FACE('',(#219164),#219189,.T.); +#219164 = FACE_BOUND('',#219165,.T.); +#219165 = EDGE_LOOP('',(#219166,#219167,#219175,#219183)); +#219166 = ORIENTED_EDGE('',*,*,#219145,.T.); +#219167 = ORIENTED_EDGE('',*,*,#219168,.T.); +#219168 = EDGE_CURVE('',#219138,#219169,#219171,.T.); +#219169 = VERTEX_POINT('',#219170); +#219170 = CARTESIAN_POINT('',(150.768038,-74.301921,1.545)); +#219171 = LINE('',#219172,#219173); +#219172 = CARTESIAN_POINT('',(150.231962,-74.301921,1.545)); +#219173 = VECTOR('',#219174,1.); +#219174 = DIRECTION('',(1.,0.,0.)); +#219175 = ORIENTED_EDGE('',*,*,#219176,.F.); +#219176 = EDGE_CURVE('',#219177,#219169,#219179,.T.); +#219177 = VERTEX_POINT('',#219178); +#219178 = CARTESIAN_POINT('',(150.768038,-74.301921,1.51)); +#219179 = LINE('',#219180,#219181); +#219180 = CARTESIAN_POINT('',(150.768038,-74.301921,1.51)); +#219181 = VECTOR('',#219182,1.); +#219182 = DIRECTION('',(0.,0.,1.)); +#219183 = ORIENTED_EDGE('',*,*,#219184,.F.); +#219184 = EDGE_CURVE('',#219146,#219177,#219185,.T.); +#219185 = LINE('',#219186,#219187); +#219186 = CARTESIAN_POINT('',(150.231962,-74.301921,1.51)); +#219187 = VECTOR('',#219188,1.); +#219188 = DIRECTION('',(1.,0.,0.)); +#219189 = PLANE('',#219190); +#219190 = AXIS2_PLACEMENT_3D('',#219191,#219192,#219193); +#219191 = CARTESIAN_POINT('',(150.231962,-74.301921,1.51)); +#219192 = DIRECTION('',(0.,1.,0.)); +#219193 = DIRECTION('',(1.,0.,0.)); +#219194 = ADVANCED_FACE('',(#219195),#219220,.T.); +#219195 = FACE_BOUND('',#219196,.T.); +#219196 = EDGE_LOOP('',(#219197,#219198,#219206,#219214)); +#219197 = ORIENTED_EDGE('',*,*,#219176,.T.); +#219198 = ORIENTED_EDGE('',*,*,#219199,.T.); +#219199 = EDGE_CURVE('',#219169,#219200,#219202,.T.); +#219200 = VERTEX_POINT('',#219201); +#219201 = CARTESIAN_POINT('',(150.804086,-74.316853,1.545)); +#219202 = LINE('',#219203,#219204); +#219203 = CARTESIAN_POINT('',(150.768038,-74.301921,1.545)); +#219204 = VECTOR('',#219205,1.); +#219205 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219206 = ORIENTED_EDGE('',*,*,#219207,.F.); +#219207 = EDGE_CURVE('',#219208,#219200,#219210,.T.); +#219208 = VERTEX_POINT('',#219209); +#219209 = CARTESIAN_POINT('',(150.804086,-74.316853,1.51)); +#219210 = LINE('',#219211,#219212); +#219211 = CARTESIAN_POINT('',(150.804086,-74.316853,1.51)); +#219212 = VECTOR('',#219213,1.); +#219213 = DIRECTION('',(0.,0.,1.)); +#219214 = ORIENTED_EDGE('',*,*,#219215,.F.); +#219215 = EDGE_CURVE('',#219177,#219208,#219216,.T.); +#219216 = LINE('',#219217,#219218); +#219217 = CARTESIAN_POINT('',(150.768038,-74.301921,1.51)); +#219218 = VECTOR('',#219219,1.); +#219219 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219220 = PLANE('',#219221); +#219221 = AXIS2_PLACEMENT_3D('',#219222,#219223,#219224); +#219222 = CARTESIAN_POINT('',(150.768038,-74.301921,1.51)); +#219223 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#219224 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219225 = ADVANCED_FACE('',(#219226),#219251,.T.); +#219226 = FACE_BOUND('',#219227,.T.); +#219227 = EDGE_LOOP('',(#219228,#219229,#219237,#219245)); +#219228 = ORIENTED_EDGE('',*,*,#219207,.T.); +#219229 = ORIENTED_EDGE('',*,*,#219230,.T.); +#219230 = EDGE_CURVE('',#219200,#219231,#219233,.T.); +#219231 = VERTEX_POINT('',#219232); +#219232 = CARTESIAN_POINT('',(151.183147,-74.695914,1.545)); +#219233 = LINE('',#219234,#219235); +#219234 = CARTESIAN_POINT('',(150.804086,-74.316853,1.545)); +#219235 = VECTOR('',#219236,1.); +#219236 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219237 = ORIENTED_EDGE('',*,*,#219238,.F.); +#219238 = EDGE_CURVE('',#219239,#219231,#219241,.T.); +#219239 = VERTEX_POINT('',#219240); +#219240 = CARTESIAN_POINT('',(151.183147,-74.695914,1.51)); +#219241 = LINE('',#219242,#219243); +#219242 = CARTESIAN_POINT('',(151.183147,-74.695914,1.51)); +#219243 = VECTOR('',#219244,1.); +#219244 = DIRECTION('',(0.,0.,1.)); +#219245 = ORIENTED_EDGE('',*,*,#219246,.F.); +#219246 = EDGE_CURVE('',#219208,#219239,#219247,.T.); +#219247 = LINE('',#219248,#219249); +#219248 = CARTESIAN_POINT('',(150.804086,-74.316853,1.51)); +#219249 = VECTOR('',#219250,1.); +#219250 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219251 = PLANE('',#219252); +#219252 = AXIS2_PLACEMENT_3D('',#219253,#219254,#219255); +#219253 = CARTESIAN_POINT('',(150.804086,-74.316853,1.51)); +#219254 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#219255 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219256 = ADVANCED_FACE('',(#219257),#219282,.T.); +#219257 = FACE_BOUND('',#219258,.T.); +#219258 = EDGE_LOOP('',(#219259,#219260,#219268,#219276)); +#219259 = ORIENTED_EDGE('',*,*,#219238,.T.); +#219260 = ORIENTED_EDGE('',*,*,#219261,.T.); +#219261 = EDGE_CURVE('',#219231,#219262,#219264,.T.); +#219262 = VERTEX_POINT('',#219263); +#219263 = CARTESIAN_POINT('',(151.198079,-74.731962,1.545)); +#219264 = LINE('',#219265,#219266); +#219265 = CARTESIAN_POINT('',(151.183147,-74.695914,1.545)); +#219266 = VECTOR('',#219267,1.); +#219267 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219268 = ORIENTED_EDGE('',*,*,#219269,.F.); +#219269 = EDGE_CURVE('',#219270,#219262,#219272,.T.); +#219270 = VERTEX_POINT('',#219271); +#219271 = CARTESIAN_POINT('',(151.198079,-74.731962,1.51)); +#219272 = LINE('',#219273,#219274); +#219273 = CARTESIAN_POINT('',(151.198079,-74.731962,1.51)); +#219274 = VECTOR('',#219275,1.); +#219275 = DIRECTION('',(0.,0.,1.)); +#219276 = ORIENTED_EDGE('',*,*,#219277,.F.); +#219277 = EDGE_CURVE('',#219239,#219270,#219278,.T.); +#219278 = LINE('',#219279,#219280); +#219279 = CARTESIAN_POINT('',(151.183147,-74.695914,1.51)); +#219280 = VECTOR('',#219281,1.); +#219281 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219282 = PLANE('',#219283); +#219283 = AXIS2_PLACEMENT_3D('',#219284,#219285,#219286); +#219284 = CARTESIAN_POINT('',(151.183147,-74.695914,1.51)); +#219285 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#219286 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219287 = ADVANCED_FACE('',(#219288),#219313,.T.); +#219288 = FACE_BOUND('',#219289,.T.); +#219289 = EDGE_LOOP('',(#219290,#219291,#219299,#219307)); +#219290 = ORIENTED_EDGE('',*,*,#219269,.T.); +#219291 = ORIENTED_EDGE('',*,*,#219292,.T.); +#219292 = EDGE_CURVE('',#219262,#219293,#219295,.T.); +#219293 = VERTEX_POINT('',#219294); +#219294 = CARTESIAN_POINT('',(151.2,-75.1,1.545)); +#219295 = LINE('',#219296,#219297); +#219296 = CARTESIAN_POINT('',(151.198079,-74.731962,1.545)); +#219297 = VECTOR('',#219298,1.); +#219298 = DIRECTION('',(5.219498619008E-03,-0.999986378324,0.)); +#219299 = ORIENTED_EDGE('',*,*,#219300,.F.); +#219300 = EDGE_CURVE('',#219301,#219293,#219303,.T.); +#219301 = VERTEX_POINT('',#219302); +#219302 = CARTESIAN_POINT('',(151.2,-75.1,1.51)); +#219303 = LINE('',#219304,#219305); +#219304 = CARTESIAN_POINT('',(151.2,-75.1,1.51)); +#219305 = VECTOR('',#219306,1.); +#219306 = DIRECTION('',(0.,0.,1.)); +#219307 = ORIENTED_EDGE('',*,*,#219308,.F.); +#219308 = EDGE_CURVE('',#219270,#219301,#219309,.T.); +#219309 = LINE('',#219310,#219311); +#219310 = CARTESIAN_POINT('',(151.198079,-74.731962,1.51)); +#219311 = VECTOR('',#219312,1.); +#219312 = DIRECTION('',(5.219498619008E-03,-0.999986378324,0.)); +#219313 = PLANE('',#219314); +#219314 = AXIS2_PLACEMENT_3D('',#219315,#219316,#219317); +#219315 = CARTESIAN_POINT('',(151.198079,-74.731962,1.51)); +#219316 = DIRECTION('',(0.999986378324,5.219498619008E-03,-0.)); +#219317 = DIRECTION('',(5.219498619008E-03,-0.999986378324,0.)); +#219318 = ADVANCED_FACE('',(#219319),#219344,.T.); +#219319 = FACE_BOUND('',#219320,.T.); +#219320 = EDGE_LOOP('',(#219321,#219322,#219330,#219338)); +#219321 = ORIENTED_EDGE('',*,*,#219300,.T.); +#219322 = ORIENTED_EDGE('',*,*,#219323,.T.); +#219323 = EDGE_CURVE('',#219293,#219324,#219326,.T.); +#219324 = VERTEX_POINT('',#219325); +#219325 = CARTESIAN_POINT('',(152.019509,-75.101921,1.545)); +#219326 = LINE('',#219327,#219328); +#219327 = CARTESIAN_POINT('',(151.2,-75.1,1.545)); +#219328 = VECTOR('',#219329,1.); +#219329 = DIRECTION('',(0.999997252641,-2.344080080063E-03,0.)); +#219330 = ORIENTED_EDGE('',*,*,#219331,.F.); +#219331 = EDGE_CURVE('',#219332,#219324,#219334,.T.); +#219332 = VERTEX_POINT('',#219333); +#219333 = CARTESIAN_POINT('',(152.019509,-75.101921,1.51)); +#219334 = LINE('',#219335,#219336); +#219335 = CARTESIAN_POINT('',(152.019509,-75.101921,1.51)); +#219336 = VECTOR('',#219337,1.); +#219337 = DIRECTION('',(0.,0.,1.)); +#219338 = ORIENTED_EDGE('',*,*,#219339,.F.); +#219339 = EDGE_CURVE('',#219301,#219332,#219340,.T.); +#219340 = LINE('',#219341,#219342); +#219341 = CARTESIAN_POINT('',(151.2,-75.1,1.51)); +#219342 = VECTOR('',#219343,1.); +#219343 = DIRECTION('',(0.999997252641,-2.344080080063E-03,0.)); +#219344 = PLANE('',#219345); +#219345 = AXIS2_PLACEMENT_3D('',#219346,#219347,#219348); +#219346 = CARTESIAN_POINT('',(151.2,-75.1,1.51)); +#219347 = DIRECTION('',(2.344080080063E-03,0.999997252641,-0.)); +#219348 = DIRECTION('',(0.999997252641,-2.344080080063E-03,0.)); +#219349 = ADVANCED_FACE('',(#219350),#219375,.T.); +#219350 = FACE_BOUND('',#219351,.T.); +#219351 = EDGE_LOOP('',(#219352,#219353,#219361,#219369)); +#219352 = ORIENTED_EDGE('',*,*,#219331,.T.); +#219353 = ORIENTED_EDGE('',*,*,#219354,.T.); +#219354 = EDGE_CURVE('',#219324,#219355,#219357,.T.); +#219355 = VERTEX_POINT('',#219356); +#219356 = CARTESIAN_POINT('',(152.055557,-75.116853,1.545)); +#219357 = LINE('',#219358,#219359); +#219358 = CARTESIAN_POINT('',(152.019509,-75.101921,1.545)); +#219359 = VECTOR('',#219360,1.); +#219360 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219361 = ORIENTED_EDGE('',*,*,#219362,.F.); +#219362 = EDGE_CURVE('',#219363,#219355,#219365,.T.); +#219363 = VERTEX_POINT('',#219364); +#219364 = CARTESIAN_POINT('',(152.055557,-75.116853,1.51)); +#219365 = LINE('',#219366,#219367); +#219366 = CARTESIAN_POINT('',(152.055557,-75.116853,1.51)); +#219367 = VECTOR('',#219368,1.); +#219368 = DIRECTION('',(0.,0.,1.)); +#219369 = ORIENTED_EDGE('',*,*,#219370,.F.); +#219370 = EDGE_CURVE('',#219332,#219363,#219371,.T.); +#219371 = LINE('',#219372,#219373); +#219372 = CARTESIAN_POINT('',(152.019509,-75.101921,1.51)); +#219373 = VECTOR('',#219374,1.); +#219374 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219375 = PLANE('',#219376); +#219376 = AXIS2_PLACEMENT_3D('',#219377,#219378,#219379); +#219377 = CARTESIAN_POINT('',(152.019509,-75.101921,1.51)); +#219378 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#219379 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#219380 = ADVANCED_FACE('',(#219381),#219406,.T.); +#219381 = FACE_BOUND('',#219382,.T.); +#219382 = EDGE_LOOP('',(#219383,#219384,#219392,#219400)); +#219383 = ORIENTED_EDGE('',*,*,#219362,.T.); +#219384 = ORIENTED_EDGE('',*,*,#219385,.T.); +#219385 = EDGE_CURVE('',#219355,#219386,#219388,.T.); +#219386 = VERTEX_POINT('',#219387); +#219387 = CARTESIAN_POINT('',(154.583147,-77.644443,1.545)); +#219388 = LINE('',#219389,#219390); +#219389 = CARTESIAN_POINT('',(152.055557,-75.116853,1.545)); +#219390 = VECTOR('',#219391,1.); +#219391 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219392 = ORIENTED_EDGE('',*,*,#219393,.F.); +#219393 = EDGE_CURVE('',#219394,#219386,#219396,.T.); +#219394 = VERTEX_POINT('',#219395); +#219395 = CARTESIAN_POINT('',(154.583147,-77.644443,1.51)); +#219396 = LINE('',#219397,#219398); +#219397 = CARTESIAN_POINT('',(154.583147,-77.644443,1.51)); +#219398 = VECTOR('',#219399,1.); +#219399 = DIRECTION('',(0.,0.,1.)); +#219400 = ORIENTED_EDGE('',*,*,#219401,.F.); +#219401 = EDGE_CURVE('',#219363,#219394,#219402,.T.); +#219402 = LINE('',#219403,#219404); +#219403 = CARTESIAN_POINT('',(152.055557,-75.116853,1.51)); +#219404 = VECTOR('',#219405,1.); +#219405 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219406 = PLANE('',#219407); +#219407 = AXIS2_PLACEMENT_3D('',#219408,#219409,#219410); +#219408 = CARTESIAN_POINT('',(152.055557,-75.116853,1.51)); +#219409 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#219410 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#219411 = ADVANCED_FACE('',(#219412),#219437,.T.); +#219412 = FACE_BOUND('',#219413,.T.); +#219413 = EDGE_LOOP('',(#219414,#219415,#219423,#219431)); +#219414 = ORIENTED_EDGE('',*,*,#219393,.T.); +#219415 = ORIENTED_EDGE('',*,*,#219416,.T.); +#219416 = EDGE_CURVE('',#219386,#219417,#219419,.T.); +#219417 = VERTEX_POINT('',#219418); +#219418 = CARTESIAN_POINT('',(154.598079,-77.680491,1.545)); +#219419 = LINE('',#219420,#219421); +#219420 = CARTESIAN_POINT('',(154.583147,-77.644443,1.545)); +#219421 = VECTOR('',#219422,1.); +#219422 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219423 = ORIENTED_EDGE('',*,*,#219424,.F.); +#219424 = EDGE_CURVE('',#219425,#219417,#219427,.T.); +#219425 = VERTEX_POINT('',#219426); +#219426 = CARTESIAN_POINT('',(154.598079,-77.680491,1.51)); +#219427 = LINE('',#219428,#219429); +#219428 = CARTESIAN_POINT('',(154.598079,-77.680491,1.51)); +#219429 = VECTOR('',#219430,1.); +#219430 = DIRECTION('',(0.,0.,1.)); +#219431 = ORIENTED_EDGE('',*,*,#219432,.F.); +#219432 = EDGE_CURVE('',#219394,#219425,#219433,.T.); +#219433 = LINE('',#219434,#219435); +#219434 = CARTESIAN_POINT('',(154.583147,-77.644443,1.51)); +#219435 = VECTOR('',#219436,1.); +#219436 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219437 = PLANE('',#219438); +#219438 = AXIS2_PLACEMENT_3D('',#219439,#219440,#219441); +#219439 = CARTESIAN_POINT('',(154.583147,-77.644443,1.51)); +#219440 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#219441 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#219442 = ADVANCED_FACE('',(#219443),#219468,.T.); +#219443 = FACE_BOUND('',#219444,.T.); +#219444 = EDGE_LOOP('',(#219445,#219446,#219454,#219462)); +#219445 = ORIENTED_EDGE('',*,*,#219424,.T.); +#219446 = ORIENTED_EDGE('',*,*,#219447,.T.); +#219447 = EDGE_CURVE('',#219417,#219448,#219450,.T.); +#219448 = VERTEX_POINT('',#219449); +#219449 = CARTESIAN_POINT('',(154.598079,-81.510294,1.545)); +#219450 = LINE('',#219451,#219452); +#219451 = CARTESIAN_POINT('',(154.598079,-77.680491,1.545)); +#219452 = VECTOR('',#219453,1.); +#219453 = DIRECTION('',(0.,-1.,0.)); +#219454 = ORIENTED_EDGE('',*,*,#219455,.F.); +#219455 = EDGE_CURVE('',#219456,#219448,#219458,.T.); +#219456 = VERTEX_POINT('',#219457); +#219457 = CARTESIAN_POINT('',(154.598079,-81.510294,1.51)); +#219458 = LINE('',#219459,#219460); +#219459 = CARTESIAN_POINT('',(154.598079,-81.510294,1.51)); +#219460 = VECTOR('',#219461,1.); +#219461 = DIRECTION('',(0.,0.,1.)); +#219462 = ORIENTED_EDGE('',*,*,#219463,.F.); +#219463 = EDGE_CURVE('',#219425,#219456,#219464,.T.); +#219464 = LINE('',#219465,#219466); +#219465 = CARTESIAN_POINT('',(154.598079,-77.680491,1.51)); +#219466 = VECTOR('',#219467,1.); +#219467 = DIRECTION('',(0.,-1.,0.)); +#219468 = PLANE('',#219469); +#219469 = AXIS2_PLACEMENT_3D('',#219470,#219471,#219472); +#219470 = CARTESIAN_POINT('',(154.598079,-77.680491,1.51)); +#219471 = DIRECTION('',(1.,0.,-0.)); +#219472 = DIRECTION('',(0.,-1.,0.)); +#219473 = ADVANCED_FACE('',(#219474),#219499,.T.); +#219474 = FACE_BOUND('',#219475,.T.); +#219475 = EDGE_LOOP('',(#219476,#219477,#219485,#219493)); +#219476 = ORIENTED_EDGE('',*,*,#219455,.T.); +#219477 = ORIENTED_EDGE('',*,*,#219478,.T.); +#219478 = EDGE_CURVE('',#219448,#219479,#219481,.T.); +#219479 = VERTEX_POINT('',#219480); +#219480 = CARTESIAN_POINT('',(154.583147,-81.546343,1.545)); +#219481 = LINE('',#219482,#219483); +#219482 = CARTESIAN_POINT('',(154.598079,-81.510294,1.545)); +#219483 = VECTOR('',#219484,1.); +#219484 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#219485 = ORIENTED_EDGE('',*,*,#219486,.F.); +#219486 = EDGE_CURVE('',#219487,#219479,#219489,.T.); +#219487 = VERTEX_POINT('',#219488); +#219488 = CARTESIAN_POINT('',(154.583147,-81.546343,1.51)); +#219489 = LINE('',#219490,#219491); +#219490 = CARTESIAN_POINT('',(154.583147,-81.546343,1.51)); +#219491 = VECTOR('',#219492,1.); +#219492 = DIRECTION('',(0.,0.,1.)); +#219493 = ORIENTED_EDGE('',*,*,#219494,.F.); +#219494 = EDGE_CURVE('',#219456,#219487,#219495,.T.); +#219495 = LINE('',#219496,#219497); +#219496 = CARTESIAN_POINT('',(154.598079,-81.510294,1.51)); +#219497 = VECTOR('',#219498,1.); +#219498 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#219499 = PLANE('',#219500); +#219500 = AXIS2_PLACEMENT_3D('',#219501,#219502,#219503); +#219501 = CARTESIAN_POINT('',(154.598079,-81.510294,1.51)); +#219502 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#219503 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#219504 = ADVANCED_FACE('',(#219505),#219530,.T.); +#219505 = FACE_BOUND('',#219506,.T.); +#219506 = EDGE_LOOP('',(#219507,#219508,#219516,#219524)); +#219507 = ORIENTED_EDGE('',*,*,#219486,.T.); +#219508 = ORIENTED_EDGE('',*,*,#219509,.T.); +#219509 = EDGE_CURVE('',#219479,#219510,#219512,.T.); +#219510 = VERTEX_POINT('',#219511); +#219511 = CARTESIAN_POINT('',(154.5,-81.632206,1.545)); +#219512 = LINE('',#219513,#219514); +#219513 = CARTESIAN_POINT('',(154.583147,-81.546343,1.545)); +#219514 = VECTOR('',#219515,1.); +#219515 = DIRECTION('',(-0.695653716974,-0.718377272789,0.)); +#219516 = ORIENTED_EDGE('',*,*,#219517,.F.); +#219517 = EDGE_CURVE('',#219518,#219510,#219520,.T.); +#219518 = VERTEX_POINT('',#219519); +#219519 = CARTESIAN_POINT('',(154.5,-81.632206,1.51)); +#219520 = LINE('',#219521,#219522); +#219521 = CARTESIAN_POINT('',(154.5,-81.632206,1.51)); +#219522 = VECTOR('',#219523,1.); +#219523 = DIRECTION('',(0.,0.,1.)); +#219524 = ORIENTED_EDGE('',*,*,#219525,.F.); +#219525 = EDGE_CURVE('',#219487,#219518,#219526,.T.); +#219526 = LINE('',#219527,#219528); +#219527 = CARTESIAN_POINT('',(154.583147,-81.546343,1.51)); +#219528 = VECTOR('',#219529,1.); +#219529 = DIRECTION('',(-0.695653716974,-0.718377272789,0.)); +#219530 = PLANE('',#219531); +#219531 = AXIS2_PLACEMENT_3D('',#219532,#219533,#219534); +#219532 = CARTESIAN_POINT('',(154.583147,-81.546343,1.51)); +#219533 = DIRECTION('',(0.718377272789,-0.695653716974,0.)); +#219534 = DIRECTION('',(-0.695653716974,-0.718377272789,0.)); +#219535 = ADVANCED_FACE('',(#219536),#219561,.T.); +#219536 = FACE_BOUND('',#219537,.T.); +#219537 = EDGE_LOOP('',(#219538,#219539,#219547,#219555)); +#219538 = ORIENTED_EDGE('',*,*,#219517,.T.); +#219539 = ORIENTED_EDGE('',*,*,#219540,.T.); +#219540 = EDGE_CURVE('',#219510,#219541,#219543,.T.); +#219541 = VERTEX_POINT('',#219542); +#219542 = CARTESIAN_POINT('',(154.5,-84.718869,1.545)); +#219543 = LINE('',#219544,#219545); +#219544 = CARTESIAN_POINT('',(154.5,-81.632206,1.545)); +#219545 = VECTOR('',#219546,1.); +#219546 = DIRECTION('',(0.,-1.,0.)); +#219547 = ORIENTED_EDGE('',*,*,#219548,.F.); +#219548 = EDGE_CURVE('',#219549,#219541,#219551,.T.); +#219549 = VERTEX_POINT('',#219550); +#219550 = CARTESIAN_POINT('',(154.5,-84.718869,1.51)); +#219551 = LINE('',#219552,#219553); +#219552 = CARTESIAN_POINT('',(154.5,-84.718869,1.51)); +#219553 = VECTOR('',#219554,1.); +#219554 = DIRECTION('',(0.,0.,1.)); +#219555 = ORIENTED_EDGE('',*,*,#219556,.F.); +#219556 = EDGE_CURVE('',#219518,#219549,#219557,.T.); +#219557 = LINE('',#219558,#219559); +#219558 = CARTESIAN_POINT('',(154.5,-81.632206,1.51)); +#219559 = VECTOR('',#219560,1.); +#219560 = DIRECTION('',(0.,-1.,0.)); +#219561 = PLANE('',#219562); +#219562 = AXIS2_PLACEMENT_3D('',#219563,#219564,#219565); +#219563 = CARTESIAN_POINT('',(154.5,-81.632206,1.51)); +#219564 = DIRECTION('',(1.,0.,-0.)); +#219565 = DIRECTION('',(0.,-1.,0.)); +#219566 = ADVANCED_FACE('',(#219567),#219592,.T.); +#219567 = FACE_BOUND('',#219568,.T.); +#219568 = EDGE_LOOP('',(#219569,#219570,#219578,#219586)); +#219569 = ORIENTED_EDGE('',*,*,#219548,.T.); +#219570 = ORIENTED_EDGE('',*,*,#219571,.T.); +#219571 = EDGE_CURVE('',#219541,#219572,#219574,.T.); +#219572 = VERTEX_POINT('',#219573); +#219573 = CARTESIAN_POINT('',(154.514805,-84.722836,1.545)); +#219574 = LINE('',#219575,#219576); +#219575 = CARTESIAN_POINT('',(154.5,-84.718869,1.545)); +#219576 = VECTOR('',#219577,1.); +#219577 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#219578 = ORIENTED_EDGE('',*,*,#219579,.F.); +#219579 = EDGE_CURVE('',#219580,#219572,#219582,.T.); +#219580 = VERTEX_POINT('',#219581); +#219581 = CARTESIAN_POINT('',(154.514805,-84.722836,1.51)); +#219582 = LINE('',#219583,#219584); +#219583 = CARTESIAN_POINT('',(154.514805,-84.722836,1.51)); +#219584 = VECTOR('',#219585,1.); +#219585 = DIRECTION('',(0.,0.,1.)); +#219586 = ORIENTED_EDGE('',*,*,#219587,.F.); +#219587 = EDGE_CURVE('',#219549,#219580,#219588,.T.); +#219588 = LINE('',#219589,#219590); +#219589 = CARTESIAN_POINT('',(154.5,-84.718869,1.51)); +#219590 = VECTOR('',#219591,1.); +#219591 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#219592 = PLANE('',#219593); +#219593 = AXIS2_PLACEMENT_3D('',#219594,#219595,#219596); +#219594 = CARTESIAN_POINT('',(154.5,-84.718869,1.51)); +#219595 = DIRECTION('',(0.258819788119,0.965925627198,-0.)); +#219596 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#219597 = ADVANCED_FACE('',(#219598),#219625,.T.); +#219598 = FACE_BOUND('',#219599,.T.); +#219599 = EDGE_LOOP('',(#219600,#219601,#219610,#219618)); +#219600 = ORIENTED_EDGE('',*,*,#219579,.T.); +#219601 = ORIENTED_EDGE('',*,*,#219602,.T.); +#219602 = EDGE_CURVE('',#219572,#219603,#219605,.T.); +#219603 = VERTEX_POINT('',#219604); +#219604 = CARTESIAN_POINT('',(154.285195,-84.722836,1.545)); +#219605 = CIRCLE('',#219606,0.299999850918); +#219606 = AXIS2_PLACEMENT_3D('',#219607,#219608,#219609); +#219607 = CARTESIAN_POINT('',(154.4,-84.99999971069,1.545)); +#219608 = DIRECTION('',(0.,0.,-1.)); +#219609 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#219610 = ORIENTED_EDGE('',*,*,#219611,.F.); +#219611 = EDGE_CURVE('',#219612,#219603,#219614,.T.); +#219612 = VERTEX_POINT('',#219613); +#219613 = CARTESIAN_POINT('',(154.285195,-84.722836,1.51)); +#219614 = LINE('',#219615,#219616); +#219615 = CARTESIAN_POINT('',(154.285195,-84.722836,1.51)); +#219616 = VECTOR('',#219617,1.); +#219617 = DIRECTION('',(0.,0.,1.)); +#219618 = ORIENTED_EDGE('',*,*,#219619,.F.); +#219619 = EDGE_CURVE('',#219580,#219612,#219620,.T.); +#219620 = CIRCLE('',#219621,0.299999850918); +#219621 = AXIS2_PLACEMENT_3D('',#219622,#219623,#219624); +#219622 = CARTESIAN_POINT('',(154.4,-84.99999971069,1.51)); +#219623 = DIRECTION('',(0.,0.,-1.)); +#219624 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#219625 = CYLINDRICAL_SURFACE('',#219626,0.299999850918); +#219626 = AXIS2_PLACEMENT_3D('',#219627,#219628,#219629); +#219627 = CARTESIAN_POINT('',(154.4,-84.99999971069,1.51)); +#219628 = DIRECTION('',(0.,0.,-1.)); +#219629 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#219630 = ADVANCED_FACE('',(#219631),#219656,.T.); +#219631 = FACE_BOUND('',#219632,.T.); +#219632 = EDGE_LOOP('',(#219633,#219634,#219642,#219650)); +#219633 = ORIENTED_EDGE('',*,*,#219611,.T.); +#219634 = ORIENTED_EDGE('',*,*,#219635,.T.); +#219635 = EDGE_CURVE('',#219603,#219636,#219638,.T.); +#219636 = VERTEX_POINT('',#219637); +#219637 = CARTESIAN_POINT('',(154.3,-84.718869,1.545)); +#219638 = LINE('',#219639,#219640); +#219639 = CARTESIAN_POINT('',(154.285195,-84.722836,1.545)); +#219640 = VECTOR('',#219641,1.); +#219641 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#219642 = ORIENTED_EDGE('',*,*,#219643,.F.); +#219643 = EDGE_CURVE('',#219644,#219636,#219646,.T.); +#219644 = VERTEX_POINT('',#219645); +#219645 = CARTESIAN_POINT('',(154.3,-84.718869,1.51)); +#219646 = LINE('',#219647,#219648); +#219647 = CARTESIAN_POINT('',(154.3,-84.718869,1.51)); +#219648 = VECTOR('',#219649,1.); +#219649 = DIRECTION('',(0.,0.,1.)); +#219650 = ORIENTED_EDGE('',*,*,#219651,.F.); +#219651 = EDGE_CURVE('',#219612,#219644,#219652,.T.); +#219652 = LINE('',#219653,#219654); +#219653 = CARTESIAN_POINT('',(154.285195,-84.722836,1.51)); +#219654 = VECTOR('',#219655,1.); +#219655 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#219656 = PLANE('',#219657); +#219657 = AXIS2_PLACEMENT_3D('',#219658,#219659,#219660); +#219658 = CARTESIAN_POINT('',(154.285195,-84.722836,1.51)); +#219659 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#219660 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#219661 = ADVANCED_FACE('',(#219662),#219687,.T.); +#219662 = FACE_BOUND('',#219663,.T.); +#219663 = EDGE_LOOP('',(#219664,#219665,#219673,#219681)); +#219664 = ORIENTED_EDGE('',*,*,#219643,.T.); +#219665 = ORIENTED_EDGE('',*,*,#219666,.T.); +#219666 = EDGE_CURVE('',#219636,#219667,#219669,.T.); +#219667 = VERTEX_POINT('',#219668); +#219668 = CARTESIAN_POINT('',(154.301921,-81.571276,1.545)); +#219669 = LINE('',#219670,#219671); +#219670 = CARTESIAN_POINT('',(154.3,-84.718869,1.545)); +#219671 = VECTOR('',#219672,1.); +#219672 = DIRECTION('',(6.10307508696E-04,0.999999813762,0.)); +#219673 = ORIENTED_EDGE('',*,*,#219674,.F.); +#219674 = EDGE_CURVE('',#219675,#219667,#219677,.T.); +#219675 = VERTEX_POINT('',#219676); +#219676 = CARTESIAN_POINT('',(154.301921,-81.571276,1.51)); +#219677 = LINE('',#219678,#219679); +#219678 = CARTESIAN_POINT('',(154.301921,-81.571276,1.51)); +#219679 = VECTOR('',#219680,1.); +#219680 = DIRECTION('',(0.,0.,1.)); +#219681 = ORIENTED_EDGE('',*,*,#219682,.F.); +#219682 = EDGE_CURVE('',#219644,#219675,#219683,.T.); +#219683 = LINE('',#219684,#219685); +#219684 = CARTESIAN_POINT('',(154.3,-84.718869,1.51)); +#219685 = VECTOR('',#219686,1.); +#219686 = DIRECTION('',(6.10307508696E-04,0.999999813762,0.)); +#219687 = PLANE('',#219688); +#219688 = AXIS2_PLACEMENT_3D('',#219689,#219690,#219691); +#219689 = CARTESIAN_POINT('',(154.3,-84.718869,1.51)); +#219690 = DIRECTION('',(-0.999999813762,6.10307508696E-04,0.)); +#219691 = DIRECTION('',(6.10307508696E-04,0.999999813762,0.)); +#219692 = ADVANCED_FACE('',(#219693),#219718,.T.); +#219693 = FACE_BOUND('',#219694,.T.); +#219694 = EDGE_LOOP('',(#219695,#219696,#219704,#219712)); +#219695 = ORIENTED_EDGE('',*,*,#219674,.T.); +#219696 = ORIENTED_EDGE('',*,*,#219697,.T.); +#219697 = EDGE_CURVE('',#219667,#219698,#219700,.T.); +#219698 = VERTEX_POINT('',#219699); +#219699 = CARTESIAN_POINT('',(154.316853,-81.535228,1.545)); +#219700 = LINE('',#219701,#219702); +#219701 = CARTESIAN_POINT('',(154.301921,-81.571276,1.545)); +#219702 = VECTOR('',#219703,1.); +#219703 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#219704 = ORIENTED_EDGE('',*,*,#219705,.F.); +#219705 = EDGE_CURVE('',#219706,#219698,#219708,.T.); +#219706 = VERTEX_POINT('',#219707); +#219707 = CARTESIAN_POINT('',(154.316853,-81.535228,1.51)); +#219708 = LINE('',#219709,#219710); +#219709 = CARTESIAN_POINT('',(154.316853,-81.535228,1.51)); +#219710 = VECTOR('',#219711,1.); +#219711 = DIRECTION('',(0.,0.,1.)); +#219712 = ORIENTED_EDGE('',*,*,#219713,.F.); +#219713 = EDGE_CURVE('',#219675,#219706,#219714,.T.); +#219714 = LINE('',#219715,#219716); +#219715 = CARTESIAN_POINT('',(154.301921,-81.571276,1.51)); +#219716 = VECTOR('',#219717,1.); +#219717 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#219718 = PLANE('',#219719); +#219719 = AXIS2_PLACEMENT_3D('',#219720,#219721,#219722); +#219720 = CARTESIAN_POINT('',(154.301921,-81.571276,1.51)); +#219721 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#219722 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#219723 = ADVANCED_FACE('',(#219724),#219749,.T.); +#219724 = FACE_BOUND('',#219725,.T.); +#219725 = EDGE_LOOP('',(#219726,#219727,#219735,#219743)); +#219726 = ORIENTED_EDGE('',*,*,#219705,.T.); +#219727 = ORIENTED_EDGE('',*,*,#219728,.T.); +#219728 = EDGE_CURVE('',#219698,#219729,#219731,.T.); +#219729 = VERTEX_POINT('',#219730); +#219730 = CARTESIAN_POINT('',(154.4,-81.449363,1.545)); +#219731 = LINE('',#219732,#219733); +#219732 = CARTESIAN_POINT('',(154.316853,-81.535228,1.545)); +#219733 = VECTOR('',#219734,1.); +#219734 = DIRECTION('',(0.695645354796,0.718385370363,0.)); +#219735 = ORIENTED_EDGE('',*,*,#219736,.F.); +#219736 = EDGE_CURVE('',#219737,#219729,#219739,.T.); +#219737 = VERTEX_POINT('',#219738); +#219738 = CARTESIAN_POINT('',(154.4,-81.449363,1.51)); +#219739 = LINE('',#219740,#219741); +#219740 = CARTESIAN_POINT('',(154.4,-81.449363,1.51)); +#219741 = VECTOR('',#219742,1.); +#219742 = DIRECTION('',(0.,0.,1.)); +#219743 = ORIENTED_EDGE('',*,*,#219744,.F.); +#219744 = EDGE_CURVE('',#219706,#219737,#219745,.T.); +#219745 = LINE('',#219746,#219747); +#219746 = CARTESIAN_POINT('',(154.316853,-81.535228,1.51)); +#219747 = VECTOR('',#219748,1.); +#219748 = DIRECTION('',(0.695645354796,0.718385370363,0.)); +#219749 = PLANE('',#219750); +#219750 = AXIS2_PLACEMENT_3D('',#219751,#219752,#219753); +#219751 = CARTESIAN_POINT('',(154.316853,-81.535228,1.51)); +#219752 = DIRECTION('',(-0.718385370363,0.695645354796,0.)); +#219753 = DIRECTION('',(0.695645354796,0.718385370363,0.)); +#219754 = ADVANCED_FACE('',(#219755),#219780,.T.); +#219755 = FACE_BOUND('',#219756,.T.); +#219756 = EDGE_LOOP('',(#219757,#219758,#219766,#219774)); +#219757 = ORIENTED_EDGE('',*,*,#219736,.T.); +#219758 = ORIENTED_EDGE('',*,*,#219759,.T.); +#219759 = EDGE_CURVE('',#219729,#219760,#219762,.T.); +#219760 = VERTEX_POINT('',#219761); +#219761 = CARTESIAN_POINT('',(154.4,-77.741422,1.545)); +#219762 = LINE('',#219763,#219764); +#219763 = CARTESIAN_POINT('',(154.4,-81.449363,1.545)); +#219764 = VECTOR('',#219765,1.); +#219765 = DIRECTION('',(0.,1.,0.)); +#219766 = ORIENTED_EDGE('',*,*,#219767,.F.); +#219767 = EDGE_CURVE('',#219768,#219760,#219770,.T.); +#219768 = VERTEX_POINT('',#219769); +#219769 = CARTESIAN_POINT('',(154.4,-77.741422,1.51)); +#219770 = LINE('',#219771,#219772); +#219771 = CARTESIAN_POINT('',(154.4,-77.741422,1.51)); +#219772 = VECTOR('',#219773,1.); +#219773 = DIRECTION('',(0.,0.,1.)); +#219774 = ORIENTED_EDGE('',*,*,#219775,.F.); +#219775 = EDGE_CURVE('',#219737,#219768,#219776,.T.); +#219776 = LINE('',#219777,#219778); +#219777 = CARTESIAN_POINT('',(154.4,-81.449363,1.51)); +#219778 = VECTOR('',#219779,1.); +#219779 = DIRECTION('',(0.,1.,0.)); +#219780 = PLANE('',#219781); +#219781 = AXIS2_PLACEMENT_3D('',#219782,#219783,#219784); +#219782 = CARTESIAN_POINT('',(154.4,-81.449363,1.51)); +#219783 = DIRECTION('',(-1.,0.,0.)); +#219784 = DIRECTION('',(0.,1.,0.)); +#219785 = ADVANCED_FACE('',(#219786),#219811,.T.); +#219786 = FACE_BOUND('',#219787,.T.); +#219787 = EDGE_LOOP('',(#219788,#219789,#219797,#219805)); +#219788 = ORIENTED_EDGE('',*,*,#219767,.T.); +#219789 = ORIENTED_EDGE('',*,*,#219790,.T.); +#219790 = EDGE_CURVE('',#219760,#219791,#219793,.T.); +#219791 = VERTEX_POINT('',#219792); +#219792 = CARTESIAN_POINT('',(151.958578,-75.3,1.545)); +#219793 = LINE('',#219794,#219795); +#219794 = CARTESIAN_POINT('',(154.4,-77.741422,1.545)); +#219795 = VECTOR('',#219796,1.); +#219796 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219797 = ORIENTED_EDGE('',*,*,#219798,.F.); +#219798 = EDGE_CURVE('',#219799,#219791,#219801,.T.); +#219799 = VERTEX_POINT('',#219800); +#219800 = CARTESIAN_POINT('',(151.958578,-75.3,1.51)); +#219801 = LINE('',#219802,#219803); +#219802 = CARTESIAN_POINT('',(151.958578,-75.3,1.51)); +#219803 = VECTOR('',#219804,1.); +#219804 = DIRECTION('',(0.,0.,1.)); +#219805 = ORIENTED_EDGE('',*,*,#219806,.F.); +#219806 = EDGE_CURVE('',#219768,#219799,#219807,.T.); +#219807 = LINE('',#219808,#219809); +#219808 = CARTESIAN_POINT('',(154.4,-77.741422,1.51)); +#219809 = VECTOR('',#219810,1.); +#219810 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219811 = PLANE('',#219812); +#219812 = AXIS2_PLACEMENT_3D('',#219813,#219814,#219815); +#219813 = CARTESIAN_POINT('',(154.4,-77.741422,1.51)); +#219814 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219815 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219816 = ADVANCED_FACE('',(#219817),#219842,.T.); +#219817 = FACE_BOUND('',#219818,.T.); +#219818 = EDGE_LOOP('',(#219819,#219820,#219828,#219836)); +#219819 = ORIENTED_EDGE('',*,*,#219798,.T.); +#219820 = ORIENTED_EDGE('',*,*,#219821,.T.); +#219821 = EDGE_CURVE('',#219791,#219822,#219824,.T.); +#219822 = VERTEX_POINT('',#219823); +#219823 = CARTESIAN_POINT('',(151.080491,-75.298079,1.545)); +#219824 = LINE('',#219825,#219826); +#219825 = CARTESIAN_POINT('',(151.958578,-75.3,1.545)); +#219826 = VECTOR('',#219827,1.); +#219827 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#219828 = ORIENTED_EDGE('',*,*,#219829,.F.); +#219829 = EDGE_CURVE('',#219830,#219822,#219832,.T.); +#219830 = VERTEX_POINT('',#219831); +#219831 = CARTESIAN_POINT('',(151.080491,-75.298079,1.51)); +#219832 = LINE('',#219833,#219834); +#219833 = CARTESIAN_POINT('',(151.080491,-75.298079,1.51)); +#219834 = VECTOR('',#219835,1.); +#219835 = DIRECTION('',(0.,0.,1.)); +#219836 = ORIENTED_EDGE('',*,*,#219837,.F.); +#219837 = EDGE_CURVE('',#219799,#219830,#219838,.T.); +#219838 = LINE('',#219839,#219840); +#219839 = CARTESIAN_POINT('',(151.958578,-75.3,1.51)); +#219840 = VECTOR('',#219841,1.); +#219841 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#219842 = PLANE('',#219843); +#219843 = AXIS2_PLACEMENT_3D('',#219844,#219845,#219846); +#219844 = CARTESIAN_POINT('',(151.958578,-75.3,1.51)); +#219845 = DIRECTION('',(-2.187705094126E-03,-0.99999760697,0.)); +#219846 = DIRECTION('',(-0.99999760697,2.187705094126E-03,0.)); +#219847 = ADVANCED_FACE('',(#219848),#219875,.T.); +#219848 = FACE_BOUND('',#219849,.T.); +#219849 = EDGE_LOOP('',(#219850,#219851,#219860,#219868)); +#219850 = ORIENTED_EDGE('',*,*,#219829,.T.); +#219851 = ORIENTED_EDGE('',*,*,#219852,.T.); +#219852 = EDGE_CURVE('',#219822,#219853,#219855,.T.); +#219853 = VERTEX_POINT('',#219854); +#219854 = CARTESIAN_POINT('',(151.001921,-75.219509,1.545)); +#219855 = CIRCLE('',#219856,0.100002891901); +#219856 = AXIS2_PLACEMENT_3D('',#219857,#219858,#219859); +#219857 = CARTESIAN_POINT('',(151.10000207103,-75.19999792896,1.545)); +#219858 = DIRECTION('',(0.,0.,-1.)); +#219859 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#219860 = ORIENTED_EDGE('',*,*,#219861,.F.); +#219861 = EDGE_CURVE('',#219862,#219853,#219864,.T.); +#219862 = VERTEX_POINT('',#219863); +#219863 = CARTESIAN_POINT('',(151.001921,-75.219509,1.51)); +#219864 = LINE('',#219865,#219866); +#219865 = CARTESIAN_POINT('',(151.001921,-75.219509,1.51)); +#219866 = VECTOR('',#219867,1.); +#219867 = DIRECTION('',(0.,0.,1.)); +#219868 = ORIENTED_EDGE('',*,*,#219869,.F.); +#219869 = EDGE_CURVE('',#219830,#219862,#219870,.T.); +#219870 = CIRCLE('',#219871,0.100002891901); +#219871 = AXIS2_PLACEMENT_3D('',#219872,#219873,#219874); +#219872 = CARTESIAN_POINT('',(151.10000207103,-75.19999792896,1.51)); +#219873 = DIRECTION('',(0.,0.,-1.)); +#219874 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#219875 = CYLINDRICAL_SURFACE('',#219876,0.100002891901); +#219876 = AXIS2_PLACEMENT_3D('',#219877,#219878,#219879); +#219877 = CARTESIAN_POINT('',(151.10000207103,-75.19999792896,1.51)); +#219878 = DIRECTION('',(0.,0.,-1.)); +#219879 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#219880 = ADVANCED_FACE('',(#219881),#219906,.T.); +#219881 = FACE_BOUND('',#219882,.T.); +#219882 = EDGE_LOOP('',(#219883,#219884,#219892,#219900)); +#219883 = ORIENTED_EDGE('',*,*,#219861,.T.); +#219884 = ORIENTED_EDGE('',*,*,#219885,.T.); +#219885 = EDGE_CURVE('',#219853,#219886,#219888,.T.); +#219886 = VERTEX_POINT('',#219887); +#219887 = CARTESIAN_POINT('',(151.,-74.792893,1.545)); +#219888 = LINE('',#219889,#219890); +#219889 = CARTESIAN_POINT('',(151.001921,-75.219509,1.545)); +#219890 = VECTOR('',#219891,1.); +#219891 = DIRECTION('',(-4.502832817546E-03,0.999989862197,0.)); +#219892 = ORIENTED_EDGE('',*,*,#219893,.F.); +#219893 = EDGE_CURVE('',#219894,#219886,#219896,.T.); +#219894 = VERTEX_POINT('',#219895); +#219895 = CARTESIAN_POINT('',(151.,-74.792893,1.51)); +#219896 = LINE('',#219897,#219898); +#219897 = CARTESIAN_POINT('',(151.,-74.792893,1.51)); +#219898 = VECTOR('',#219899,1.); +#219899 = DIRECTION('',(0.,0.,1.)); +#219900 = ORIENTED_EDGE('',*,*,#219901,.F.); +#219901 = EDGE_CURVE('',#219862,#219894,#219902,.T.); +#219902 = LINE('',#219903,#219904); +#219903 = CARTESIAN_POINT('',(151.001921,-75.219509,1.51)); +#219904 = VECTOR('',#219905,1.); +#219905 = DIRECTION('',(-4.502832817546E-03,0.999989862197,0.)); +#219906 = PLANE('',#219907); +#219907 = AXIS2_PLACEMENT_3D('',#219908,#219909,#219910); +#219908 = CARTESIAN_POINT('',(151.001921,-75.219509,1.51)); +#219909 = DIRECTION('',(-0.999989862197,-4.502832817546E-03,0.)); +#219910 = DIRECTION('',(-4.502832817546E-03,0.999989862197,0.)); +#219911 = ADVANCED_FACE('',(#219912),#219937,.T.); +#219912 = FACE_BOUND('',#219913,.T.); +#219913 = EDGE_LOOP('',(#219914,#219915,#219923,#219931)); +#219914 = ORIENTED_EDGE('',*,*,#219893,.T.); +#219915 = ORIENTED_EDGE('',*,*,#219916,.T.); +#219916 = EDGE_CURVE('',#219886,#219917,#219919,.T.); +#219917 = VERTEX_POINT('',#219918); +#219918 = CARTESIAN_POINT('',(150.707107,-74.5,1.545)); +#219919 = LINE('',#219920,#219921); +#219920 = CARTESIAN_POINT('',(151.,-74.792893,1.545)); +#219921 = VECTOR('',#219922,1.); +#219922 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219923 = ORIENTED_EDGE('',*,*,#219924,.F.); +#219924 = EDGE_CURVE('',#219925,#219917,#219927,.T.); +#219925 = VERTEX_POINT('',#219926); +#219926 = CARTESIAN_POINT('',(150.707107,-74.5,1.51)); +#219927 = LINE('',#219928,#219929); +#219928 = CARTESIAN_POINT('',(150.707107,-74.5,1.51)); +#219929 = VECTOR('',#219930,1.); +#219930 = DIRECTION('',(0.,0.,1.)); +#219931 = ORIENTED_EDGE('',*,*,#219932,.F.); +#219932 = EDGE_CURVE('',#219894,#219925,#219933,.T.); +#219933 = LINE('',#219934,#219935); +#219934 = CARTESIAN_POINT('',(151.,-74.792893,1.51)); +#219935 = VECTOR('',#219936,1.); +#219936 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219937 = PLANE('',#219938); +#219938 = AXIS2_PLACEMENT_3D('',#219939,#219940,#219941); +#219939 = CARTESIAN_POINT('',(151.,-74.792893,1.51)); +#219940 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#219941 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#219942 = ADVANCED_FACE('',(#219943),#219968,.T.); +#219943 = FACE_BOUND('',#219944,.T.); +#219944 = EDGE_LOOP('',(#219945,#219946,#219954,#219962)); +#219945 = ORIENTED_EDGE('',*,*,#219924,.T.); +#219946 = ORIENTED_EDGE('',*,*,#219947,.T.); +#219947 = EDGE_CURVE('',#219917,#219948,#219950,.T.); +#219948 = VERTEX_POINT('',#219949); +#219949 = CARTESIAN_POINT('',(150.292892,-74.5,1.545)); +#219950 = LINE('',#219951,#219952); +#219951 = CARTESIAN_POINT('',(150.707107,-74.5,1.545)); +#219952 = VECTOR('',#219953,1.); +#219953 = DIRECTION('',(-1.,0.,0.)); +#219954 = ORIENTED_EDGE('',*,*,#219955,.F.); +#219955 = EDGE_CURVE('',#219956,#219948,#219958,.T.); +#219956 = VERTEX_POINT('',#219957); +#219957 = CARTESIAN_POINT('',(150.292892,-74.5,1.51)); +#219958 = LINE('',#219959,#219960); +#219959 = CARTESIAN_POINT('',(150.292892,-74.5,1.51)); +#219960 = VECTOR('',#219961,1.); +#219961 = DIRECTION('',(0.,0.,1.)); +#219962 = ORIENTED_EDGE('',*,*,#219963,.F.); +#219963 = EDGE_CURVE('',#219925,#219956,#219964,.T.); +#219964 = LINE('',#219965,#219966); +#219965 = CARTESIAN_POINT('',(150.707107,-74.5,1.51)); +#219966 = VECTOR('',#219967,1.); +#219967 = DIRECTION('',(-1.,0.,0.)); +#219968 = PLANE('',#219969); +#219969 = AXIS2_PLACEMENT_3D('',#219970,#219971,#219972); +#219970 = CARTESIAN_POINT('',(150.707107,-74.5,1.51)); +#219971 = DIRECTION('',(0.,-1.,0.)); +#219972 = DIRECTION('',(-1.,0.,0.)); +#219973 = ADVANCED_FACE('',(#219974),#219999,.T.); +#219974 = FACE_BOUND('',#219975,.T.); +#219975 = EDGE_LOOP('',(#219976,#219977,#219985,#219993)); +#219976 = ORIENTED_EDGE('',*,*,#219955,.T.); +#219977 = ORIENTED_EDGE('',*,*,#219978,.T.); +#219978 = EDGE_CURVE('',#219948,#219979,#219981,.T.); +#219979 = VERTEX_POINT('',#219980); +#219980 = CARTESIAN_POINT('',(150.1084,-74.681775,1.545)); +#219981 = LINE('',#219982,#219983); +#219982 = CARTESIAN_POINT('',(150.292892,-74.5,1.545)); +#219983 = VECTOR('',#219984,1.); +#219984 = DIRECTION('',(-0.712332561051,-0.701842092259,0.)); +#219985 = ORIENTED_EDGE('',*,*,#219986,.F.); +#219986 = EDGE_CURVE('',#219987,#219979,#219989,.T.); +#219987 = VERTEX_POINT('',#219988); +#219988 = CARTESIAN_POINT('',(150.1084,-74.681775,1.51)); +#219989 = LINE('',#219990,#219991); +#219990 = CARTESIAN_POINT('',(150.1084,-74.681775,1.51)); +#219991 = VECTOR('',#219992,1.); +#219992 = DIRECTION('',(0.,0.,1.)); +#219993 = ORIENTED_EDGE('',*,*,#219994,.F.); +#219994 = EDGE_CURVE('',#219956,#219987,#219995,.T.); +#219995 = LINE('',#219996,#219997); +#219996 = CARTESIAN_POINT('',(150.292892,-74.5,1.51)); +#219997 = VECTOR('',#219998,1.); +#219998 = DIRECTION('',(-0.712332561051,-0.701842092259,0.)); +#219999 = PLANE('',#220000); +#220000 = AXIS2_PLACEMENT_3D('',#220001,#220002,#220003); +#220001 = CARTESIAN_POINT('',(150.292892,-74.5,1.51)); +#220002 = DIRECTION('',(0.701842092259,-0.712332561051,0.)); +#220003 = DIRECTION('',(-0.712332561051,-0.701842092259,0.)); +#220004 = ADVANCED_FACE('',(#220005),#220032,.T.); +#220005 = FACE_BOUND('',#220006,.T.); +#220006 = EDGE_LOOP('',(#220007,#220008,#220017,#220025)); +#220007 = ORIENTED_EDGE('',*,*,#219986,.T.); +#220008 = ORIENTED_EDGE('',*,*,#220009,.T.); +#220009 = EDGE_CURVE('',#219979,#220010,#220012,.T.); +#220010 = VERTEX_POINT('',#220011); +#220011 = CARTESIAN_POINT('',(149.997285,-74.681775,1.545)); +#220012 = CIRCLE('',#220013,9.999886556632E-02); +#220013 = AXIS2_PLACEMENT_3D('',#220014,#220015,#220016); +#220014 = CARTESIAN_POINT('',(150.0528425,-74.59862972167,1.545)); +#220015 = DIRECTION('',(-0.,0.,-1.)); +#220016 = DIRECTION('',(0.555581302701,-0.831462215671,-0.)); +#220017 = ORIENTED_EDGE('',*,*,#220018,.F.); +#220018 = EDGE_CURVE('',#220019,#220010,#220021,.T.); +#220019 = VERTEX_POINT('',#220020); +#220020 = CARTESIAN_POINT('',(149.997285,-74.681775,1.51)); +#220021 = LINE('',#220022,#220023); +#220022 = CARTESIAN_POINT('',(149.997285,-74.681775,1.51)); +#220023 = VECTOR('',#220024,1.); +#220024 = DIRECTION('',(0.,0.,1.)); +#220025 = ORIENTED_EDGE('',*,*,#220026,.F.); +#220026 = EDGE_CURVE('',#219987,#220019,#220027,.T.); +#220027 = CIRCLE('',#220028,9.999886556632E-02); +#220028 = AXIS2_PLACEMENT_3D('',#220029,#220030,#220031); +#220029 = CARTESIAN_POINT('',(150.0528425,-74.59862972167,1.51)); +#220030 = DIRECTION('',(-0.,0.,-1.)); +#220031 = DIRECTION('',(0.555581302701,-0.831462215671,-0.)); +#220032 = CYLINDRICAL_SURFACE('',#220033,9.999886556632E-02); +#220033 = AXIS2_PLACEMENT_3D('',#220034,#220035,#220036); +#220034 = CARTESIAN_POINT('',(150.0528425,-74.59862972167,1.51)); +#220035 = DIRECTION('',(-0.,0.,-1.)); +#220036 = DIRECTION('',(0.555581302701,-0.831462215671,-0.)); +#220037 = ADVANCED_FACE('',(#220038),#220063,.T.); +#220038 = FACE_BOUND('',#220039,.T.); +#220039 = EDGE_LOOP('',(#220040,#220041,#220049,#220057)); +#220040 = ORIENTED_EDGE('',*,*,#220018,.T.); +#220041 = ORIENTED_EDGE('',*,*,#220042,.T.); +#220042 = EDGE_CURVE('',#220010,#220043,#220045,.T.); +#220043 = VERTEX_POINT('',#220044); +#220044 = CARTESIAN_POINT('',(149.568528,-74.255735,1.545)); +#220045 = LINE('',#220046,#220047); +#220046 = CARTESIAN_POINT('',(149.997285,-74.681775,1.545)); +#220047 = VECTOR('',#220048,1.); +#220048 = DIRECTION('',(-0.709350759733,0.704855658746,0.)); +#220049 = ORIENTED_EDGE('',*,*,#220050,.F.); +#220050 = EDGE_CURVE('',#220051,#220043,#220053,.T.); +#220051 = VERTEX_POINT('',#220052); +#220052 = CARTESIAN_POINT('',(149.568528,-74.255735,1.51)); +#220053 = LINE('',#220054,#220055); +#220054 = CARTESIAN_POINT('',(149.568528,-74.255735,1.51)); +#220055 = VECTOR('',#220056,1.); +#220056 = DIRECTION('',(0.,0.,1.)); +#220057 = ORIENTED_EDGE('',*,*,#220058,.F.); +#220058 = EDGE_CURVE('',#220019,#220051,#220059,.T.); +#220059 = LINE('',#220060,#220061); +#220060 = CARTESIAN_POINT('',(149.997285,-74.681775,1.51)); +#220061 = VECTOR('',#220062,1.); +#220062 = DIRECTION('',(-0.709350759733,0.704855658746,0.)); +#220063 = PLANE('',#220064); +#220064 = AXIS2_PLACEMENT_3D('',#220065,#220066,#220067); +#220065 = CARTESIAN_POINT('',(149.997285,-74.681775,1.51)); +#220066 = DIRECTION('',(-0.704855658746,-0.709350759733,0.)); +#220067 = DIRECTION('',(-0.709350759733,0.704855658746,0.)); +#220068 = ADVANCED_FACE('',(#220069),#220094,.T.); +#220069 = FACE_BOUND('',#220070,.T.); +#220070 = EDGE_LOOP('',(#220071,#220072,#220080,#220088)); +#220071 = ORIENTED_EDGE('',*,*,#220050,.T.); +#220072 = ORIENTED_EDGE('',*,*,#220073,.T.); +#220073 = EDGE_CURVE('',#220043,#220074,#220076,.T.); +#220074 = VERTEX_POINT('',#220075); +#220075 = CARTESIAN_POINT('',(149.336226,-74.253814,1.545)); +#220076 = LINE('',#220077,#220078); +#220077 = CARTESIAN_POINT('',(149.568528,-74.255735,1.545)); +#220078 = VECTOR('',#220079,1.); +#220079 = DIRECTION('',(-0.9999658102,8.269125196468E-03,0.)); +#220080 = ORIENTED_EDGE('',*,*,#220081,.F.); +#220081 = EDGE_CURVE('',#220082,#220074,#220084,.T.); +#220082 = VERTEX_POINT('',#220083); +#220083 = CARTESIAN_POINT('',(149.336226,-74.253814,1.51)); +#220084 = LINE('',#220085,#220086); +#220085 = CARTESIAN_POINT('',(149.336226,-74.253814,1.51)); +#220086 = VECTOR('',#220087,1.); +#220087 = DIRECTION('',(0.,0.,1.)); +#220088 = ORIENTED_EDGE('',*,*,#220089,.F.); +#220089 = EDGE_CURVE('',#220051,#220082,#220090,.T.); +#220090 = LINE('',#220091,#220092); +#220091 = CARTESIAN_POINT('',(149.568528,-74.255735,1.51)); +#220092 = VECTOR('',#220093,1.); +#220093 = DIRECTION('',(-0.9999658102,8.269125196468E-03,0.)); +#220094 = PLANE('',#220095); +#220095 = AXIS2_PLACEMENT_3D('',#220096,#220097,#220098); +#220096 = CARTESIAN_POINT('',(149.568528,-74.255735,1.51)); +#220097 = DIRECTION('',(-8.269125196468E-03,-0.9999658102,0.)); +#220098 = DIRECTION('',(-0.9999658102,8.269125196468E-03,0.)); +#220099 = ADVANCED_FACE('',(#220100),#220125,.T.); +#220100 = FACE_BOUND('',#220101,.T.); +#220101 = EDGE_LOOP('',(#220102,#220103,#220111,#220119)); +#220102 = ORIENTED_EDGE('',*,*,#220081,.T.); +#220103 = ORIENTED_EDGE('',*,*,#220104,.T.); +#220104 = EDGE_CURVE('',#220074,#220105,#220107,.T.); +#220105 = VERTEX_POINT('',#220106); +#220106 = CARTESIAN_POINT('',(149.300178,-74.238882,1.545)); +#220107 = LINE('',#220108,#220109); +#220108 = CARTESIAN_POINT('',(149.336226,-74.253814,1.545)); +#220109 = VECTOR('',#220110,1.); +#220110 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#220111 = ORIENTED_EDGE('',*,*,#220112,.F.); +#220112 = EDGE_CURVE('',#220113,#220105,#220115,.T.); +#220113 = VERTEX_POINT('',#220114); +#220114 = CARTESIAN_POINT('',(149.300178,-74.238882,1.51)); +#220115 = LINE('',#220116,#220117); +#220116 = CARTESIAN_POINT('',(149.300178,-74.238882,1.51)); +#220117 = VECTOR('',#220118,1.); +#220118 = DIRECTION('',(0.,0.,1.)); +#220119 = ORIENTED_EDGE('',*,*,#220120,.F.); +#220120 = EDGE_CURVE('',#220082,#220113,#220121,.T.); +#220121 = LINE('',#220122,#220123); +#220122 = CARTESIAN_POINT('',(149.336226,-74.253814,1.51)); +#220123 = VECTOR('',#220124,1.); +#220124 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#220125 = PLANE('',#220126); +#220126 = AXIS2_PLACEMENT_3D('',#220127,#220128,#220129); +#220127 = CARTESIAN_POINT('',(149.336226,-74.253814,1.51)); +#220128 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#220129 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#220130 = ADVANCED_FACE('',(#220131),#220156,.T.); +#220131 = FACE_BOUND('',#220132,.T.); +#220132 = EDGE_LOOP('',(#220133,#220134,#220142,#220150)); +#220133 = ORIENTED_EDGE('',*,*,#220112,.T.); +#220134 = ORIENTED_EDGE('',*,*,#220135,.T.); +#220135 = EDGE_CURVE('',#220105,#220136,#220138,.T.); +#220136 = VERTEX_POINT('',#220137); +#220137 = CARTESIAN_POINT('',(149.061118,-73.999822,1.545)); +#220138 = LINE('',#220139,#220140); +#220139 = CARTESIAN_POINT('',(149.300178,-74.238882,1.545)); +#220140 = VECTOR('',#220141,1.); +#220141 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220142 = ORIENTED_EDGE('',*,*,#220143,.F.); +#220143 = EDGE_CURVE('',#220144,#220136,#220146,.T.); +#220144 = VERTEX_POINT('',#220145); +#220145 = CARTESIAN_POINT('',(149.061118,-73.999822,1.51)); +#220146 = LINE('',#220147,#220148); +#220147 = CARTESIAN_POINT('',(149.061118,-73.999822,1.51)); +#220148 = VECTOR('',#220149,1.); +#220149 = DIRECTION('',(0.,0.,1.)); +#220150 = ORIENTED_EDGE('',*,*,#220151,.F.); +#220151 = EDGE_CURVE('',#220113,#220144,#220152,.T.); +#220152 = LINE('',#220153,#220154); +#220153 = CARTESIAN_POINT('',(149.300178,-74.238882,1.51)); +#220154 = VECTOR('',#220155,1.); +#220155 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220156 = PLANE('',#220157); +#220157 = AXIS2_PLACEMENT_3D('',#220158,#220159,#220160); +#220158 = CARTESIAN_POINT('',(149.300178,-74.238882,1.51)); +#220159 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#220160 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220161 = ADVANCED_FACE('',(#220162),#220187,.T.); +#220162 = FACE_BOUND('',#220163,.T.); +#220163 = EDGE_LOOP('',(#220164,#220165,#220173,#220181)); +#220164 = ORIENTED_EDGE('',*,*,#220143,.T.); +#220165 = ORIENTED_EDGE('',*,*,#220166,.T.); +#220166 = EDGE_CURVE('',#220136,#220167,#220169,.T.); +#220167 = VERTEX_POINT('',#220168); +#220168 = CARTESIAN_POINT('',(149.046186,-73.963774,1.545)); +#220169 = LINE('',#220170,#220171); +#220170 = CARTESIAN_POINT('',(149.061118,-73.999822,1.545)); +#220171 = VECTOR('',#220172,1.); +#220172 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220173 = ORIENTED_EDGE('',*,*,#220174,.F.); +#220174 = EDGE_CURVE('',#220175,#220167,#220177,.T.); +#220175 = VERTEX_POINT('',#220176); +#220176 = CARTESIAN_POINT('',(149.046186,-73.963774,1.51)); +#220177 = LINE('',#220178,#220179); +#220178 = CARTESIAN_POINT('',(149.046186,-73.963774,1.51)); +#220179 = VECTOR('',#220180,1.); +#220180 = DIRECTION('',(0.,0.,1.)); +#220181 = ORIENTED_EDGE('',*,*,#220182,.F.); +#220182 = EDGE_CURVE('',#220144,#220175,#220183,.T.); +#220183 = LINE('',#220184,#220185); +#220184 = CARTESIAN_POINT('',(149.061118,-73.999822,1.51)); +#220185 = VECTOR('',#220186,1.); +#220186 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220187 = PLANE('',#220188); +#220188 = AXIS2_PLACEMENT_3D('',#220189,#220190,#220191); +#220189 = CARTESIAN_POINT('',(149.061118,-73.999822,1.51)); +#220190 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#220191 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220192 = ADVANCED_FACE('',(#220193),#220218,.T.); +#220193 = FACE_BOUND('',#220194,.T.); +#220194 = EDGE_LOOP('',(#220195,#220196,#220204,#220212)); +#220195 = ORIENTED_EDGE('',*,*,#220174,.T.); +#220196 = ORIENTED_EDGE('',*,*,#220197,.T.); +#220197 = EDGE_CURVE('',#220167,#220198,#220200,.T.); +#220198 = VERTEX_POINT('',#220199); +#220199 = CARTESIAN_POINT('',(149.044265,-73.748628,1.545)); +#220200 = LINE('',#220201,#220202); +#220201 = CARTESIAN_POINT('',(149.046186,-73.963774,1.545)); +#220202 = VECTOR('',#220203,1.); +#220203 = DIRECTION('',(-8.928464530345E-03,0.999960140466,0.)); +#220204 = ORIENTED_EDGE('',*,*,#220205,.F.); +#220205 = EDGE_CURVE('',#220206,#220198,#220208,.T.); +#220206 = VERTEX_POINT('',#220207); +#220207 = CARTESIAN_POINT('',(149.044265,-73.748628,1.51)); +#220208 = LINE('',#220209,#220210); +#220209 = CARTESIAN_POINT('',(149.044265,-73.748628,1.51)); +#220210 = VECTOR('',#220211,1.); +#220211 = DIRECTION('',(0.,0.,1.)); +#220212 = ORIENTED_EDGE('',*,*,#220213,.F.); +#220213 = EDGE_CURVE('',#220175,#220206,#220214,.T.); +#220214 = LINE('',#220215,#220216); +#220215 = CARTESIAN_POINT('',(149.046186,-73.963774,1.51)); +#220216 = VECTOR('',#220217,1.); +#220217 = DIRECTION('',(-8.928464530345E-03,0.999960140466,0.)); +#220218 = PLANE('',#220219); +#220219 = AXIS2_PLACEMENT_3D('',#220220,#220221,#220222); +#220220 = CARTESIAN_POINT('',(149.046186,-73.963774,1.51)); +#220221 = DIRECTION('',(-0.999960140466,-8.928464530345E-03,0.)); +#220222 = DIRECTION('',(-8.928464530345E-03,0.999960140466,0.)); +#220223 = ADVANCED_FACE('',(#220224),#220249,.T.); +#220224 = FACE_BOUND('',#220225,.T.); +#220225 = EDGE_LOOP('',(#220226,#220227,#220235,#220243)); +#220226 = ORIENTED_EDGE('',*,*,#220205,.T.); +#220227 = ORIENTED_EDGE('',*,*,#220228,.T.); +#220228 = EDGE_CURVE('',#220198,#220229,#220231,.T.); +#220229 = VERTEX_POINT('',#220230); +#220230 = CARTESIAN_POINT('',(148.751372,-73.455735,1.545)); +#220231 = LINE('',#220232,#220233); +#220232 = CARTESIAN_POINT('',(149.044265,-73.748628,1.545)); +#220233 = VECTOR('',#220234,1.); +#220234 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220235 = ORIENTED_EDGE('',*,*,#220236,.F.); +#220236 = EDGE_CURVE('',#220237,#220229,#220239,.T.); +#220237 = VERTEX_POINT('',#220238); +#220238 = CARTESIAN_POINT('',(148.751372,-73.455735,1.51)); +#220239 = LINE('',#220240,#220241); +#220240 = CARTESIAN_POINT('',(148.751372,-73.455735,1.51)); +#220241 = VECTOR('',#220242,1.); +#220242 = DIRECTION('',(0.,0.,1.)); +#220243 = ORIENTED_EDGE('',*,*,#220244,.F.); +#220244 = EDGE_CURVE('',#220206,#220237,#220245,.T.); +#220245 = LINE('',#220246,#220247); +#220246 = CARTESIAN_POINT('',(149.044265,-73.748628,1.51)); +#220247 = VECTOR('',#220248,1.); +#220248 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220249 = PLANE('',#220250); +#220250 = AXIS2_PLACEMENT_3D('',#220251,#220252,#220253); +#220251 = CARTESIAN_POINT('',(149.044265,-73.748628,1.51)); +#220252 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#220253 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220254 = ADVANCED_FACE('',(#220255),#220280,.T.); +#220255 = FACE_BOUND('',#220256,.T.); +#220256 = EDGE_LOOP('',(#220257,#220258,#220266,#220274)); +#220257 = ORIENTED_EDGE('',*,*,#220236,.T.); +#220258 = ORIENTED_EDGE('',*,*,#220259,.T.); +#220259 = EDGE_CURVE('',#220229,#220260,#220262,.T.); +#220260 = VERTEX_POINT('',#220261); +#220261 = CARTESIAN_POINT('',(148.536226,-73.453814,1.545)); +#220262 = LINE('',#220263,#220264); +#220263 = CARTESIAN_POINT('',(148.751372,-73.455735,1.545)); +#220264 = VECTOR('',#220265,1.); +#220265 = DIRECTION('',(-0.999960140466,8.928464530345E-03,0.)); +#220266 = ORIENTED_EDGE('',*,*,#220267,.F.); +#220267 = EDGE_CURVE('',#220268,#220260,#220270,.T.); +#220268 = VERTEX_POINT('',#220269); +#220269 = CARTESIAN_POINT('',(148.536226,-73.453814,1.51)); +#220270 = LINE('',#220271,#220272); +#220271 = CARTESIAN_POINT('',(148.536226,-73.453814,1.51)); +#220272 = VECTOR('',#220273,1.); +#220273 = DIRECTION('',(0.,0.,1.)); +#220274 = ORIENTED_EDGE('',*,*,#220275,.F.); +#220275 = EDGE_CURVE('',#220237,#220268,#220276,.T.); +#220276 = LINE('',#220277,#220278); +#220277 = CARTESIAN_POINT('',(148.751372,-73.455735,1.51)); +#220278 = VECTOR('',#220279,1.); +#220279 = DIRECTION('',(-0.999960140466,8.928464530345E-03,0.)); +#220280 = PLANE('',#220281); +#220281 = AXIS2_PLACEMENT_3D('',#220282,#220283,#220284); +#220282 = CARTESIAN_POINT('',(148.751372,-73.455735,1.51)); +#220283 = DIRECTION('',(-8.928464530345E-03,-0.999960140466,0.)); +#220284 = DIRECTION('',(-0.999960140466,8.928464530345E-03,0.)); +#220285 = ADVANCED_FACE('',(#220286),#220311,.T.); +#220286 = FACE_BOUND('',#220287,.T.); +#220287 = EDGE_LOOP('',(#220288,#220289,#220297,#220305)); +#220288 = ORIENTED_EDGE('',*,*,#220267,.T.); +#220289 = ORIENTED_EDGE('',*,*,#220290,.T.); +#220290 = EDGE_CURVE('',#220260,#220291,#220293,.T.); +#220291 = VERTEX_POINT('',#220292); +#220292 = CARTESIAN_POINT('',(148.500178,-73.438883,1.545)); +#220293 = LINE('',#220294,#220295); +#220294 = CARTESIAN_POINT('',(148.536226,-73.453814,1.545)); +#220295 = VECTOR('',#220296,1.); +#220296 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#220297 = ORIENTED_EDGE('',*,*,#220298,.F.); +#220298 = EDGE_CURVE('',#220299,#220291,#220301,.T.); +#220299 = VERTEX_POINT('',#220300); +#220300 = CARTESIAN_POINT('',(148.500178,-73.438883,1.51)); +#220301 = LINE('',#220302,#220303); +#220302 = CARTESIAN_POINT('',(148.500178,-73.438883,1.51)); +#220303 = VECTOR('',#220304,1.); +#220304 = DIRECTION('',(0.,0.,1.)); +#220305 = ORIENTED_EDGE('',*,*,#220306,.F.); +#220306 = EDGE_CURVE('',#220268,#220299,#220307,.T.); +#220307 = LINE('',#220308,#220309); +#220308 = CARTESIAN_POINT('',(148.536226,-73.453814,1.51)); +#220309 = VECTOR('',#220310,1.); +#220310 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#220311 = PLANE('',#220312); +#220312 = AXIS2_PLACEMENT_3D('',#220313,#220314,#220315); +#220313 = CARTESIAN_POINT('',(148.536226,-73.453814,1.51)); +#220314 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#220315 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#220316 = ADVANCED_FACE('',(#220317),#220342,.T.); +#220317 = FACE_BOUND('',#220318,.T.); +#220318 = EDGE_LOOP('',(#220319,#220320,#220328,#220336)); +#220319 = ORIENTED_EDGE('',*,*,#220298,.T.); +#220320 = ORIENTED_EDGE('',*,*,#220321,.T.); +#220321 = EDGE_CURVE('',#220291,#220322,#220324,.T.); +#220322 = VERTEX_POINT('',#220323); +#220323 = CARTESIAN_POINT('',(148.316853,-73.255557,1.545)); +#220324 = LINE('',#220325,#220326); +#220325 = CARTESIAN_POINT('',(148.500178,-73.438883,1.545)); +#220326 = VECTOR('',#220327,1.); +#220327 = DIRECTION('',(-0.707104852628,0.707108709739,0.)); +#220328 = ORIENTED_EDGE('',*,*,#220329,.F.); +#220329 = EDGE_CURVE('',#220330,#220322,#220332,.T.); +#220330 = VERTEX_POINT('',#220331); +#220331 = CARTESIAN_POINT('',(148.316853,-73.255557,1.51)); +#220332 = LINE('',#220333,#220334); +#220333 = CARTESIAN_POINT('',(148.316853,-73.255557,1.51)); +#220334 = VECTOR('',#220335,1.); +#220335 = DIRECTION('',(0.,0.,1.)); +#220336 = ORIENTED_EDGE('',*,*,#220337,.F.); +#220337 = EDGE_CURVE('',#220299,#220330,#220338,.T.); +#220338 = LINE('',#220339,#220340); +#220339 = CARTESIAN_POINT('',(148.500178,-73.438883,1.51)); +#220340 = VECTOR('',#220341,1.); +#220341 = DIRECTION('',(-0.707104852628,0.707108709739,0.)); +#220342 = PLANE('',#220343); +#220343 = AXIS2_PLACEMENT_3D('',#220344,#220345,#220346); +#220344 = CARTESIAN_POINT('',(148.500178,-73.438883,1.51)); +#220345 = DIRECTION('',(-0.707108709739,-0.707104852628,0.)); +#220346 = DIRECTION('',(-0.707104852628,0.707108709739,0.)); +#220347 = ADVANCED_FACE('',(#220348),#220373,.T.); +#220348 = FACE_BOUND('',#220349,.T.); +#220349 = EDGE_LOOP('',(#220350,#220351,#220359,#220367)); +#220350 = ORIENTED_EDGE('',*,*,#220329,.T.); +#220351 = ORIENTED_EDGE('',*,*,#220352,.T.); +#220352 = EDGE_CURVE('',#220322,#220353,#220355,.T.); +#220353 = VERTEX_POINT('',#220354); +#220354 = CARTESIAN_POINT('',(148.301921,-73.219509,1.545)); +#220355 = LINE('',#220356,#220357); +#220356 = CARTESIAN_POINT('',(148.316853,-73.255557,1.545)); +#220357 = VECTOR('',#220358,1.); +#220358 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220359 = ORIENTED_EDGE('',*,*,#220360,.F.); +#220360 = EDGE_CURVE('',#220361,#220353,#220363,.T.); +#220361 = VERTEX_POINT('',#220362); +#220362 = CARTESIAN_POINT('',(148.301921,-73.219509,1.51)); +#220363 = LINE('',#220364,#220365); +#220364 = CARTESIAN_POINT('',(148.301921,-73.219509,1.51)); +#220365 = VECTOR('',#220366,1.); +#220366 = DIRECTION('',(0.,0.,1.)); +#220367 = ORIENTED_EDGE('',*,*,#220368,.F.); +#220368 = EDGE_CURVE('',#220330,#220361,#220369,.T.); +#220369 = LINE('',#220370,#220371); +#220370 = CARTESIAN_POINT('',(148.316853,-73.255557,1.51)); +#220371 = VECTOR('',#220372,1.); +#220372 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220373 = PLANE('',#220374); +#220374 = AXIS2_PLACEMENT_3D('',#220375,#220376,#220377); +#220375 = CARTESIAN_POINT('',(148.316853,-73.255557,1.51)); +#220376 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#220377 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#220378 = ADVANCED_FACE('',(#220379),#220404,.T.); +#220379 = FACE_BOUND('',#220380,.T.); +#220380 = EDGE_LOOP('',(#220381,#220382,#220390,#220398)); +#220381 = ORIENTED_EDGE('',*,*,#220360,.T.); +#220382 = ORIENTED_EDGE('',*,*,#220383,.T.); +#220383 = EDGE_CURVE('',#220353,#220384,#220386,.T.); +#220384 = VERTEX_POINT('',#220385); +#220385 = CARTESIAN_POINT('',(148.3,-68.627944,1.545)); +#220386 = LINE('',#220387,#220388); +#220387 = CARTESIAN_POINT('',(148.301921,-73.219509,1.545)); +#220388 = VECTOR('',#220389,1.); +#220389 = DIRECTION('',(-4.183758330454E-04,0.999999912481,0.)); +#220390 = ORIENTED_EDGE('',*,*,#220391,.F.); +#220391 = EDGE_CURVE('',#220392,#220384,#220394,.T.); +#220392 = VERTEX_POINT('',#220393); +#220393 = CARTESIAN_POINT('',(148.3,-68.627944,1.51)); +#220394 = LINE('',#220395,#220396); +#220395 = CARTESIAN_POINT('',(148.3,-68.627944,1.51)); +#220396 = VECTOR('',#220397,1.); +#220397 = DIRECTION('',(0.,0.,1.)); +#220398 = ORIENTED_EDGE('',*,*,#220399,.F.); +#220399 = EDGE_CURVE('',#220361,#220392,#220400,.T.); +#220400 = LINE('',#220401,#220402); +#220401 = CARTESIAN_POINT('',(148.301921,-73.219509,1.51)); +#220402 = VECTOR('',#220403,1.); +#220403 = DIRECTION('',(-4.183758330454E-04,0.999999912481,0.)); +#220404 = PLANE('',#220405); +#220405 = AXIS2_PLACEMENT_3D('',#220406,#220407,#220408); +#220406 = CARTESIAN_POINT('',(148.301921,-73.219509,1.51)); +#220407 = DIRECTION('',(-0.999999912481,-4.183758330454E-04,0.)); +#220408 = DIRECTION('',(-4.183758330454E-04,0.999999912481,0.)); +#220409 = ADVANCED_FACE('',(#220410),#220435,.T.); +#220410 = FACE_BOUND('',#220411,.T.); +#220411 = EDGE_LOOP('',(#220412,#220413,#220421,#220429)); +#220412 = ORIENTED_EDGE('',*,*,#220391,.T.); +#220413 = ORIENTED_EDGE('',*,*,#220414,.T.); +#220414 = EDGE_CURVE('',#220384,#220415,#220417,.T.); +#220415 = VERTEX_POINT('',#220416); +#220416 = CARTESIAN_POINT('',(147.91879,-68.246735,1.545)); +#220417 = LINE('',#220418,#220419); +#220418 = CARTESIAN_POINT('',(148.3,-68.627944,1.545)); +#220419 = VECTOR('',#220420,1.); +#220420 = DIRECTION('',(-0.707107708638,0.707105853734,0.)); +#220421 = ORIENTED_EDGE('',*,*,#220422,.F.); +#220422 = EDGE_CURVE('',#220423,#220415,#220425,.T.); +#220423 = VERTEX_POINT('',#220424); +#220424 = CARTESIAN_POINT('',(147.91879,-68.246735,1.51)); +#220425 = LINE('',#220426,#220427); +#220426 = CARTESIAN_POINT('',(147.91879,-68.246735,1.51)); +#220427 = VECTOR('',#220428,1.); +#220428 = DIRECTION('',(0.,0.,1.)); +#220429 = ORIENTED_EDGE('',*,*,#220430,.F.); +#220430 = EDGE_CURVE('',#220392,#220423,#220431,.T.); +#220431 = LINE('',#220432,#220433); +#220432 = CARTESIAN_POINT('',(148.3,-68.627944,1.51)); +#220433 = VECTOR('',#220434,1.); +#220434 = DIRECTION('',(-0.707107708638,0.707105853734,0.)); +#220435 = PLANE('',#220436); +#220436 = AXIS2_PLACEMENT_3D('',#220437,#220438,#220439); +#220437 = CARTESIAN_POINT('',(148.3,-68.627944,1.51)); +#220438 = DIRECTION('',(-0.707105853734,-0.707107708638,0.)); +#220439 = DIRECTION('',(-0.707107708638,0.707105853734,0.)); +#220440 = ADVANCED_FACE('',(#220441),#220466,.T.); +#220441 = FACE_BOUND('',#220442,.T.); +#220442 = EDGE_LOOP('',(#220443,#220444,#220452,#220460)); +#220443 = ORIENTED_EDGE('',*,*,#220422,.T.); +#220444 = ORIENTED_EDGE('',*,*,#220445,.T.); +#220445 = EDGE_CURVE('',#220415,#220446,#220448,.T.); +#220446 = VERTEX_POINT('',#220447); +#220447 = CARTESIAN_POINT('',(147.894976,-68.230711,1.545)); +#220448 = LINE('',#220449,#220450); +#220449 = CARTESIAN_POINT('',(147.91879,-68.246735,1.545)); +#220450 = VECTOR('',#220451,1.); +#220451 = DIRECTION('',(-0.82966284543,0.558264778499,0.)); +#220452 = ORIENTED_EDGE('',*,*,#220453,.F.); +#220453 = EDGE_CURVE('',#220454,#220446,#220456,.T.); +#220454 = VERTEX_POINT('',#220455); +#220455 = CARTESIAN_POINT('',(147.894976,-68.230711,1.51)); +#220456 = LINE('',#220457,#220458); +#220457 = CARTESIAN_POINT('',(147.894976,-68.230711,1.51)); +#220458 = VECTOR('',#220459,1.); +#220459 = DIRECTION('',(0.,0.,1.)); +#220460 = ORIENTED_EDGE('',*,*,#220461,.F.); +#220461 = EDGE_CURVE('',#220423,#220454,#220462,.T.); +#220462 = LINE('',#220463,#220464); +#220463 = CARTESIAN_POINT('',(147.91879,-68.246735,1.51)); +#220464 = VECTOR('',#220465,1.); +#220465 = DIRECTION('',(-0.82966284543,0.558264778499,0.)); +#220466 = PLANE('',#220467); +#220467 = AXIS2_PLACEMENT_3D('',#220468,#220469,#220470); +#220468 = CARTESIAN_POINT('',(147.91879,-68.246735,1.51)); +#220469 = DIRECTION('',(-0.558264778499,-0.82966284543,0.)); +#220470 = DIRECTION('',(-0.82966284543,0.558264778499,0.)); +#220471 = ADVANCED_FACE('',(#220472),#220497,.T.); +#220472 = FACE_BOUND('',#220473,.T.); +#220473 = EDGE_LOOP('',(#220474,#220475,#220483,#220491)); +#220474 = ORIENTED_EDGE('',*,*,#220453,.T.); +#220475 = ORIENTED_EDGE('',*,*,#220476,.T.); +#220476 = EDGE_CURVE('',#220446,#220477,#220479,.T.); +#220477 = VERTEX_POINT('',#220478); +#220478 = CARTESIAN_POINT('',(147.824264,-68.16,1.545)); +#220479 = LINE('',#220480,#220481); +#220480 = CARTESIAN_POINT('',(147.894976,-68.230711,1.545)); +#220481 = VECTOR('',#220482,1.); +#220482 = DIRECTION('',(-0.707111781111,0.707101781227,0.)); +#220483 = ORIENTED_EDGE('',*,*,#220484,.F.); +#220484 = EDGE_CURVE('',#220485,#220477,#220487,.T.); +#220485 = VERTEX_POINT('',#220486); +#220486 = CARTESIAN_POINT('',(147.824264,-68.16,1.51)); +#220487 = LINE('',#220488,#220489); +#220488 = CARTESIAN_POINT('',(147.824264,-68.16,1.51)); +#220489 = VECTOR('',#220490,1.); +#220490 = DIRECTION('',(0.,0.,1.)); +#220491 = ORIENTED_EDGE('',*,*,#220492,.F.); +#220492 = EDGE_CURVE('',#220454,#220485,#220493,.T.); +#220493 = LINE('',#220494,#220495); +#220494 = CARTESIAN_POINT('',(147.894976,-68.230711,1.51)); +#220495 = VECTOR('',#220496,1.); +#220496 = DIRECTION('',(-0.707111781111,0.707101781227,0.)); +#220497 = PLANE('',#220498); +#220498 = AXIS2_PLACEMENT_3D('',#220499,#220500,#220501); +#220499 = CARTESIAN_POINT('',(147.894976,-68.230711,1.51)); +#220500 = DIRECTION('',(-0.707101781227,-0.707111781111,0.)); +#220501 = DIRECTION('',(-0.707111781111,0.707101781227,0.)); +#220502 = ADVANCED_FACE('',(#220503),#220528,.T.); +#220503 = FACE_BOUND('',#220504,.T.); +#220504 = EDGE_LOOP('',(#220505,#220506,#220514,#220522)); +#220505 = ORIENTED_EDGE('',*,*,#220484,.T.); +#220506 = ORIENTED_EDGE('',*,*,#220507,.T.); +#220507 = EDGE_CURVE('',#220477,#220508,#220510,.T.); +#220508 = VERTEX_POINT('',#220509); +#220509 = CARTESIAN_POINT('',(147.780491,-68.158079,1.545)); +#220510 = LINE('',#220511,#220512); +#220511 = CARTESIAN_POINT('',(147.824264,-68.16,1.545)); +#220512 = VECTOR('',#220513,1.); +#220513 = DIRECTION('',(-0.99903842017,4.38433007823E-02,0.)); +#220514 = ORIENTED_EDGE('',*,*,#220515,.F.); +#220515 = EDGE_CURVE('',#220516,#220508,#220518,.T.); +#220516 = VERTEX_POINT('',#220517); +#220517 = CARTESIAN_POINT('',(147.780491,-68.158079,1.51)); +#220518 = LINE('',#220519,#220520); +#220519 = CARTESIAN_POINT('',(147.780491,-68.158079,1.51)); +#220520 = VECTOR('',#220521,1.); +#220521 = DIRECTION('',(0.,0.,1.)); +#220522 = ORIENTED_EDGE('',*,*,#220523,.F.); +#220523 = EDGE_CURVE('',#220485,#220516,#220524,.T.); +#220524 = LINE('',#220525,#220526); +#220525 = CARTESIAN_POINT('',(147.824264,-68.16,1.51)); +#220526 = VECTOR('',#220527,1.); +#220527 = DIRECTION('',(-0.99903842017,4.38433007823E-02,0.)); +#220528 = PLANE('',#220529); +#220529 = AXIS2_PLACEMENT_3D('',#220530,#220531,#220532); +#220530 = CARTESIAN_POINT('',(147.824264,-68.16,1.51)); +#220531 = DIRECTION('',(-4.38433007823E-02,-0.99903842017,0.)); +#220532 = DIRECTION('',(-0.99903842017,4.38433007823E-02,0.)); +#220533 = ADVANCED_FACE('',(#220534),#220561,.T.); +#220534 = FACE_BOUND('',#220535,.T.); +#220535 = EDGE_LOOP('',(#220536,#220537,#220546,#220554)); +#220536 = ORIENTED_EDGE('',*,*,#220515,.T.); +#220537 = ORIENTED_EDGE('',*,*,#220538,.T.); +#220538 = EDGE_CURVE('',#220508,#220539,#220541,.T.); +#220539 = VERTEX_POINT('',#220540); +#220540 = CARTESIAN_POINT('',(147.701921,-68.079509,1.545)); +#220541 = CIRCLE('',#220542,0.100002891901); +#220542 = AXIS2_PLACEMENT_3D('',#220543,#220544,#220545); +#220543 = CARTESIAN_POINT('',(147.80000207103,-68.05999792896,1.545)); +#220544 = DIRECTION('',(0.,0.,-1.)); +#220545 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220546 = ORIENTED_EDGE('',*,*,#220547,.F.); +#220547 = EDGE_CURVE('',#220548,#220539,#220550,.T.); +#220548 = VERTEX_POINT('',#220549); +#220549 = CARTESIAN_POINT('',(147.701921,-68.079509,1.51)); +#220550 = LINE('',#220551,#220552); +#220551 = CARTESIAN_POINT('',(147.701921,-68.079509,1.51)); +#220552 = VECTOR('',#220553,1.); +#220553 = DIRECTION('',(0.,0.,1.)); +#220554 = ORIENTED_EDGE('',*,*,#220555,.F.); +#220555 = EDGE_CURVE('',#220516,#220548,#220556,.T.); +#220556 = CIRCLE('',#220557,0.100002891901); +#220557 = AXIS2_PLACEMENT_3D('',#220558,#220559,#220560); +#220558 = CARTESIAN_POINT('',(147.80000207103,-68.05999792896,1.51)); +#220559 = DIRECTION('',(0.,0.,-1.)); +#220560 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220561 = CYLINDRICAL_SURFACE('',#220562,0.100002891901); +#220562 = AXIS2_PLACEMENT_3D('',#220563,#220564,#220565); +#220563 = CARTESIAN_POINT('',(147.80000207103,-68.05999792896,1.51)); +#220564 = DIRECTION('',(0.,0.,-1.)); +#220565 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220566 = ADVANCED_FACE('',(#220567),#220592,.T.); +#220567 = FACE_BOUND('',#220568,.T.); +#220568 = EDGE_LOOP('',(#220569,#220570,#220578,#220586)); +#220569 = ORIENTED_EDGE('',*,*,#220547,.T.); +#220570 = ORIENTED_EDGE('',*,*,#220571,.T.); +#220571 = EDGE_CURVE('',#220539,#220572,#220574,.T.); +#220572 = VERTEX_POINT('',#220573); +#220573 = CARTESIAN_POINT('',(147.7,-67.81,1.545)); +#220574 = LINE('',#220575,#220576); +#220575 = CARTESIAN_POINT('',(147.701921,-68.079509,1.545)); +#220576 = VECTOR('',#220577,1.); +#220577 = DIRECTION('',(-7.127595751803E-03,0.999974598367,0.)); +#220578 = ORIENTED_EDGE('',*,*,#220579,.F.); +#220579 = EDGE_CURVE('',#220580,#220572,#220582,.T.); +#220580 = VERTEX_POINT('',#220581); +#220581 = CARTESIAN_POINT('',(147.7,-67.81,1.51)); +#220582 = LINE('',#220583,#220584); +#220583 = CARTESIAN_POINT('',(147.7,-67.81,1.51)); +#220584 = VECTOR('',#220585,1.); +#220585 = DIRECTION('',(0.,0.,1.)); +#220586 = ORIENTED_EDGE('',*,*,#220587,.F.); +#220587 = EDGE_CURVE('',#220548,#220580,#220588,.T.); +#220588 = LINE('',#220589,#220590); +#220589 = CARTESIAN_POINT('',(147.701921,-68.079509,1.51)); +#220590 = VECTOR('',#220591,1.); +#220591 = DIRECTION('',(-7.127595751803E-03,0.999974598367,0.)); +#220592 = PLANE('',#220593); +#220593 = AXIS2_PLACEMENT_3D('',#220594,#220595,#220596); +#220594 = CARTESIAN_POINT('',(147.701921,-68.079509,1.51)); +#220595 = DIRECTION('',(-0.999974598367,-7.127595751803E-03,0.)); +#220596 = DIRECTION('',(-7.127595751803E-03,0.999974598367,0.)); +#220597 = ADVANCED_FACE('',(#220598),#220623,.T.); +#220598 = FACE_BOUND('',#220599,.T.); +#220599 = EDGE_LOOP('',(#220600,#220601,#220609,#220617)); +#220600 = ORIENTED_EDGE('',*,*,#220579,.T.); +#220601 = ORIENTED_EDGE('',*,*,#220602,.T.); +#220602 = EDGE_CURVE('',#220572,#220603,#220605,.T.); +#220603 = VERTEX_POINT('',#220604); +#220604 = CARTESIAN_POINT('',(146.730491,-67.808079,1.545)); +#220605 = LINE('',#220606,#220607); +#220606 = CARTESIAN_POINT('',(147.7,-67.81,1.545)); +#220607 = VECTOR('',#220608,1.); +#220608 = DIRECTION('',(-0.999998037002,1.981411445461E-03,0.)); +#220609 = ORIENTED_EDGE('',*,*,#220610,.F.); +#220610 = EDGE_CURVE('',#220611,#220603,#220613,.T.); +#220611 = VERTEX_POINT('',#220612); +#220612 = CARTESIAN_POINT('',(146.730491,-67.808079,1.51)); +#220613 = LINE('',#220614,#220615); +#220614 = CARTESIAN_POINT('',(146.730491,-67.808079,1.51)); +#220615 = VECTOR('',#220616,1.); +#220616 = DIRECTION('',(0.,0.,1.)); +#220617 = ORIENTED_EDGE('',*,*,#220618,.F.); +#220618 = EDGE_CURVE('',#220580,#220611,#220619,.T.); +#220619 = LINE('',#220620,#220621); +#220620 = CARTESIAN_POINT('',(147.7,-67.81,1.51)); +#220621 = VECTOR('',#220622,1.); +#220622 = DIRECTION('',(-0.999998037002,1.981411445461E-03,0.)); +#220623 = PLANE('',#220624); +#220624 = AXIS2_PLACEMENT_3D('',#220625,#220626,#220627); +#220625 = CARTESIAN_POINT('',(147.7,-67.81,1.51)); +#220626 = DIRECTION('',(-1.981411445461E-03,-0.999998037002,0.)); +#220627 = DIRECTION('',(-0.999998037002,1.981411445461E-03,0.)); +#220628 = ADVANCED_FACE('',(#220629),#220656,.T.); +#220629 = FACE_BOUND('',#220630,.T.); +#220630 = EDGE_LOOP('',(#220631,#220632,#220641,#220649)); +#220631 = ORIENTED_EDGE('',*,*,#220610,.T.); +#220632 = ORIENTED_EDGE('',*,*,#220633,.T.); +#220633 = EDGE_CURVE('',#220603,#220634,#220636,.T.); +#220634 = VERTEX_POINT('',#220635); +#220635 = CARTESIAN_POINT('',(146.651921,-67.729509,1.545)); +#220636 = CIRCLE('',#220637,0.100002891901); +#220637 = AXIS2_PLACEMENT_3D('',#220638,#220639,#220640); +#220638 = CARTESIAN_POINT('',(146.75000207103,-67.70999792896,1.545)); +#220639 = DIRECTION('',(0.,0.,-1.)); +#220640 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220641 = ORIENTED_EDGE('',*,*,#220642,.F.); +#220642 = EDGE_CURVE('',#220643,#220634,#220645,.T.); +#220643 = VERTEX_POINT('',#220644); +#220644 = CARTESIAN_POINT('',(146.651921,-67.729509,1.51)); +#220645 = LINE('',#220646,#220647); +#220646 = CARTESIAN_POINT('',(146.651921,-67.729509,1.51)); +#220647 = VECTOR('',#220648,1.); +#220648 = DIRECTION('',(0.,0.,1.)); +#220649 = ORIENTED_EDGE('',*,*,#220650,.F.); +#220650 = EDGE_CURVE('',#220611,#220643,#220651,.T.); +#220651 = CIRCLE('',#220652,0.100002891901); +#220652 = AXIS2_PLACEMENT_3D('',#220653,#220654,#220655); +#220653 = CARTESIAN_POINT('',(146.75000207103,-67.70999792896,1.51)); +#220654 = DIRECTION('',(0.,0.,-1.)); +#220655 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220656 = CYLINDRICAL_SURFACE('',#220657,0.100002891901); +#220657 = AXIS2_PLACEMENT_3D('',#220658,#220659,#220660); +#220658 = CARTESIAN_POINT('',(146.75000207103,-67.70999792896,1.51)); +#220659 = DIRECTION('',(0.,0.,-1.)); +#220660 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#220661 = ADVANCED_FACE('',(#220662),#220687,.T.); +#220662 = FACE_BOUND('',#220663,.T.); +#220663 = EDGE_LOOP('',(#220664,#220665,#220673,#220681)); +#220664 = ORIENTED_EDGE('',*,*,#220642,.T.); +#220665 = ORIENTED_EDGE('',*,*,#220666,.T.); +#220666 = EDGE_CURVE('',#220634,#220667,#220669,.T.); +#220667 = VERTEX_POINT('',#220668); +#220668 = CARTESIAN_POINT('',(146.651921,-67.170491,1.545)); +#220669 = LINE('',#220670,#220671); +#220670 = CARTESIAN_POINT('',(146.651921,-67.729509,1.545)); +#220671 = VECTOR('',#220672,1.); +#220672 = DIRECTION('',(0.,1.,0.)); +#220673 = ORIENTED_EDGE('',*,*,#220674,.F.); +#220674 = EDGE_CURVE('',#220675,#220667,#220677,.T.); +#220675 = VERTEX_POINT('',#220676); +#220676 = CARTESIAN_POINT('',(146.651921,-67.170491,1.51)); +#220677 = LINE('',#220678,#220679); +#220678 = CARTESIAN_POINT('',(146.651921,-67.170491,1.51)); +#220679 = VECTOR('',#220680,1.); +#220680 = DIRECTION('',(0.,0.,1.)); +#220681 = ORIENTED_EDGE('',*,*,#220682,.F.); +#220682 = EDGE_CURVE('',#220643,#220675,#220683,.T.); +#220683 = LINE('',#220684,#220685); +#220684 = CARTESIAN_POINT('',(146.651921,-67.729509,1.51)); +#220685 = VECTOR('',#220686,1.); +#220686 = DIRECTION('',(0.,1.,0.)); +#220687 = PLANE('',#220688); +#220688 = AXIS2_PLACEMENT_3D('',#220689,#220690,#220691); +#220689 = CARTESIAN_POINT('',(146.651921,-67.729509,1.51)); +#220690 = DIRECTION('',(-1.,0.,0.)); +#220691 = DIRECTION('',(0.,1.,0.)); +#220692 = ADVANCED_FACE('',(#220693),#220718,.T.); +#220693 = FACE_BOUND('',#220694,.T.); +#220694 = EDGE_LOOP('',(#220695,#220696,#220704,#220712)); +#220695 = ORIENTED_EDGE('',*,*,#220674,.T.); +#220696 = ORIENTED_EDGE('',*,*,#220697,.T.); +#220697 = EDGE_CURVE('',#220667,#220698,#220700,.T.); +#220698 = VERTEX_POINT('',#220699); +#220699 = CARTESIAN_POINT('',(146.666853,-67.134443,1.545)); +#220700 = LINE('',#220701,#220702); +#220701 = CARTESIAN_POINT('',(146.651921,-67.170491,1.545)); +#220702 = VECTOR('',#220703,1.); +#220703 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#220704 = ORIENTED_EDGE('',*,*,#220705,.F.); +#220705 = EDGE_CURVE('',#220706,#220698,#220708,.T.); +#220706 = VERTEX_POINT('',#220707); +#220707 = CARTESIAN_POINT('',(146.666853,-67.134443,1.51)); +#220708 = LINE('',#220709,#220710); +#220709 = CARTESIAN_POINT('',(146.666853,-67.134443,1.51)); +#220710 = VECTOR('',#220711,1.); +#220711 = DIRECTION('',(0.,0.,1.)); +#220712 = ORIENTED_EDGE('',*,*,#220713,.F.); +#220713 = EDGE_CURVE('',#220675,#220706,#220714,.T.); +#220714 = LINE('',#220715,#220716); +#220715 = CARTESIAN_POINT('',(146.651921,-67.170491,1.51)); +#220716 = VECTOR('',#220717,1.); +#220717 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#220718 = PLANE('',#220719); +#220719 = AXIS2_PLACEMENT_3D('',#220720,#220721,#220722); +#220720 = CARTESIAN_POINT('',(146.651921,-67.170491,1.51)); +#220721 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#220722 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#220723 = ADVANCED_FACE('',(#220724),#220740,.T.); +#220724 = FACE_BOUND('',#220725,.T.); +#220725 = EDGE_LOOP('',(#220726,#220727,#220733,#220734)); +#220726 = ORIENTED_EDGE('',*,*,#220705,.T.); +#220727 = ORIENTED_EDGE('',*,*,#220728,.T.); +#220728 = EDGE_CURVE('',#220698,#218444,#220729,.T.); +#220729 = LINE('',#220730,#220731); +#220730 = CARTESIAN_POINT('',(146.666853,-67.134443,1.545)); +#220731 = VECTOR('',#220732,1.); +#220732 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#220733 = ORIENTED_EDGE('',*,*,#218441,.F.); +#220734 = ORIENTED_EDGE('',*,*,#220735,.F.); +#220735 = EDGE_CURVE('',#220706,#218442,#220736,.T.); +#220736 = LINE('',#220737,#220738); +#220737 = CARTESIAN_POINT('',(146.666853,-67.134443,1.51)); +#220738 = VECTOR('',#220739,1.); +#220739 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#220740 = PLANE('',#220741); +#220741 = AXIS2_PLACEMENT_3D('',#220742,#220743,#220744); +#220742 = CARTESIAN_POINT('',(146.666853,-67.134443,1.51)); +#220743 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#220744 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#220745 = ADVANCED_FACE('',(#220746),#220773,.F.); +#220746 = FACE_BOUND('',#220747,.T.); +#220747 = EDGE_LOOP('',(#220748,#220758,#220765,#220766)); +#220748 = ORIENTED_EDGE('',*,*,#220749,.T.); +#220749 = EDGE_CURVE('',#220750,#220752,#220754,.T.); +#220750 = VERTEX_POINT('',#220751); +#220751 = CARTESIAN_POINT('',(154.537255,-85.,1.51)); +#220752 = VERTEX_POINT('',#220753); +#220753 = CARTESIAN_POINT('',(154.537255,-85.,1.545)); +#220754 = LINE('',#220755,#220756); +#220755 = CARTESIAN_POINT('',(154.537255,-85.,1.51)); +#220756 = VECTOR('',#220757,1.); +#220757 = DIRECTION('',(0.,0.,1.)); +#220758 = ORIENTED_EDGE('',*,*,#220759,.T.); +#220759 = EDGE_CURVE('',#220752,#220752,#220760,.T.); +#220760 = CIRCLE('',#220761,0.137255); +#220761 = AXIS2_PLACEMENT_3D('',#220762,#220763,#220764); +#220762 = CARTESIAN_POINT('',(154.4,-85.,1.545)); +#220763 = DIRECTION('',(0.,0.,1.)); +#220764 = DIRECTION('',(1.,0.,-0.)); +#220765 = ORIENTED_EDGE('',*,*,#220749,.F.); +#220766 = ORIENTED_EDGE('',*,*,#220767,.F.); +#220767 = EDGE_CURVE('',#220750,#220750,#220768,.T.); +#220768 = CIRCLE('',#220769,0.137255); +#220769 = AXIS2_PLACEMENT_3D('',#220770,#220771,#220772); +#220770 = CARTESIAN_POINT('',(154.4,-85.,1.51)); +#220771 = DIRECTION('',(0.,0.,1.)); +#220772 = DIRECTION('',(1.,0.,-0.)); +#220773 = CYLINDRICAL_SURFACE('',#220774,0.137255); +#220774 = AXIS2_PLACEMENT_3D('',#220775,#220776,#220777); +#220775 = CARTESIAN_POINT('',(154.4,-85.,1.51)); +#220776 = DIRECTION('',(-0.,-0.,-1.)); +#220777 = DIRECTION('',(1.,0.,-0.)); +#220778 = ADVANCED_FACE('',(#220779,#220855),#220858,.F.); +#220779 = FACE_BOUND('',#220780,.T.); +#220780 = EDGE_LOOP('',(#220781,#220782,#220783,#220784,#220785,#220786, + #220787,#220788,#220789,#220790,#220791,#220792,#220793,#220794, + #220795,#220796,#220797,#220798,#220799,#220800,#220801,#220802, + #220803,#220804,#220805,#220806,#220807,#220808,#220809,#220810, + #220811,#220812,#220813,#220814,#220815,#220816,#220817,#220818, + #220819,#220820,#220821,#220822,#220823,#220824,#220825,#220826, + #220827,#220828,#220829,#220830,#220831,#220832,#220833,#220834, + #220835,#220836,#220837,#220838,#220839,#220840,#220841,#220842, + #220843,#220844,#220845,#220846,#220847,#220848,#220849,#220850, + #220851,#220852,#220853,#220854)); +#220781 = ORIENTED_EDGE('',*,*,#218468,.T.); +#220782 = ORIENTED_EDGE('',*,*,#218500,.T.); +#220783 = ORIENTED_EDGE('',*,*,#218531,.T.); +#220784 = ORIENTED_EDGE('',*,*,#218563,.T.); +#220785 = ORIENTED_EDGE('',*,*,#218595,.T.); +#220786 = ORIENTED_EDGE('',*,*,#218626,.T.); +#220787 = ORIENTED_EDGE('',*,*,#218657,.T.); +#220788 = ORIENTED_EDGE('',*,*,#218688,.T.); +#220789 = ORIENTED_EDGE('',*,*,#218719,.T.); +#220790 = ORIENTED_EDGE('',*,*,#218750,.T.); +#220791 = ORIENTED_EDGE('',*,*,#218781,.T.); +#220792 = ORIENTED_EDGE('',*,*,#218812,.T.); +#220793 = ORIENTED_EDGE('',*,*,#218843,.T.); +#220794 = ORIENTED_EDGE('',*,*,#218874,.T.); +#220795 = ORIENTED_EDGE('',*,*,#218905,.T.); +#220796 = ORIENTED_EDGE('',*,*,#218936,.T.); +#220797 = ORIENTED_EDGE('',*,*,#218967,.T.); +#220798 = ORIENTED_EDGE('',*,*,#218998,.T.); +#220799 = ORIENTED_EDGE('',*,*,#219029,.T.); +#220800 = ORIENTED_EDGE('',*,*,#219060,.T.); +#220801 = ORIENTED_EDGE('',*,*,#219091,.T.); +#220802 = ORIENTED_EDGE('',*,*,#219122,.T.); +#220803 = ORIENTED_EDGE('',*,*,#219153,.T.); +#220804 = ORIENTED_EDGE('',*,*,#219184,.T.); +#220805 = ORIENTED_EDGE('',*,*,#219215,.T.); +#220806 = ORIENTED_EDGE('',*,*,#219246,.T.); +#220807 = ORIENTED_EDGE('',*,*,#219277,.T.); +#220808 = ORIENTED_EDGE('',*,*,#219308,.T.); +#220809 = ORIENTED_EDGE('',*,*,#219339,.T.); +#220810 = ORIENTED_EDGE('',*,*,#219370,.T.); +#220811 = ORIENTED_EDGE('',*,*,#219401,.T.); +#220812 = ORIENTED_EDGE('',*,*,#219432,.T.); +#220813 = ORIENTED_EDGE('',*,*,#219463,.T.); +#220814 = ORIENTED_EDGE('',*,*,#219494,.T.); +#220815 = ORIENTED_EDGE('',*,*,#219525,.T.); +#220816 = ORIENTED_EDGE('',*,*,#219556,.T.); +#220817 = ORIENTED_EDGE('',*,*,#219587,.T.); +#220818 = ORIENTED_EDGE('',*,*,#219619,.T.); +#220819 = ORIENTED_EDGE('',*,*,#219651,.T.); +#220820 = ORIENTED_EDGE('',*,*,#219682,.T.); +#220821 = ORIENTED_EDGE('',*,*,#219713,.T.); +#220822 = ORIENTED_EDGE('',*,*,#219744,.T.); +#220823 = ORIENTED_EDGE('',*,*,#219775,.T.); +#220824 = ORIENTED_EDGE('',*,*,#219806,.T.); +#220825 = ORIENTED_EDGE('',*,*,#219837,.T.); +#220826 = ORIENTED_EDGE('',*,*,#219869,.T.); +#220827 = ORIENTED_EDGE('',*,*,#219901,.T.); +#220828 = ORIENTED_EDGE('',*,*,#219932,.T.); +#220829 = ORIENTED_EDGE('',*,*,#219963,.T.); +#220830 = ORIENTED_EDGE('',*,*,#219994,.T.); +#220831 = ORIENTED_EDGE('',*,*,#220026,.T.); +#220832 = ORIENTED_EDGE('',*,*,#220058,.T.); +#220833 = ORIENTED_EDGE('',*,*,#220089,.T.); +#220834 = ORIENTED_EDGE('',*,*,#220120,.T.); +#220835 = ORIENTED_EDGE('',*,*,#220151,.T.); +#220836 = ORIENTED_EDGE('',*,*,#220182,.T.); +#220837 = ORIENTED_EDGE('',*,*,#220213,.T.); +#220838 = ORIENTED_EDGE('',*,*,#220244,.T.); +#220839 = ORIENTED_EDGE('',*,*,#220275,.T.); +#220840 = ORIENTED_EDGE('',*,*,#220306,.T.); +#220841 = ORIENTED_EDGE('',*,*,#220337,.T.); +#220842 = ORIENTED_EDGE('',*,*,#220368,.T.); +#220843 = ORIENTED_EDGE('',*,*,#220399,.T.); +#220844 = ORIENTED_EDGE('',*,*,#220430,.T.); +#220845 = ORIENTED_EDGE('',*,*,#220461,.T.); +#220846 = ORIENTED_EDGE('',*,*,#220492,.T.); +#220847 = ORIENTED_EDGE('',*,*,#220523,.T.); +#220848 = ORIENTED_EDGE('',*,*,#220555,.T.); +#220849 = ORIENTED_EDGE('',*,*,#220587,.T.); +#220850 = ORIENTED_EDGE('',*,*,#220618,.T.); +#220851 = ORIENTED_EDGE('',*,*,#220650,.T.); +#220852 = ORIENTED_EDGE('',*,*,#220682,.T.); +#220853 = ORIENTED_EDGE('',*,*,#220713,.T.); +#220854 = ORIENTED_EDGE('',*,*,#220735,.T.); +#220855 = FACE_BOUND('',#220856,.T.); +#220856 = EDGE_LOOP('',(#220857)); +#220857 = ORIENTED_EDGE('',*,*,#220767,.T.); +#220858 = PLANE('',#220859); +#220859 = AXIS2_PLACEMENT_3D('',#220860,#220861,#220862); +#220860 = CARTESIAN_POINT('',(0.,0.,1.51)); +#220861 = DIRECTION('',(0.,0.,1.)); +#220862 = DIRECTION('',(1.,0.,-0.)); +#220863 = ADVANCED_FACE('',(#220864,#220940),#220943,.T.); +#220864 = FACE_BOUND('',#220865,.F.); +#220865 = EDGE_LOOP('',(#220866,#220867,#220868,#220869,#220870,#220871, + #220872,#220873,#220874,#220875,#220876,#220877,#220878,#220879, + #220880,#220881,#220882,#220883,#220884,#220885,#220886,#220887, + #220888,#220889,#220890,#220891,#220892,#220893,#220894,#220895, + #220896,#220897,#220898,#220899,#220900,#220901,#220902,#220903, + #220904,#220905,#220906,#220907,#220908,#220909,#220910,#220911, + #220912,#220913,#220914,#220915,#220916,#220917,#220918,#220919, + #220920,#220921,#220922,#220923,#220924,#220925,#220926,#220927, + #220928,#220929,#220930,#220931,#220932,#220933,#220934,#220935, + #220936,#220937,#220938,#220939)); +#220866 = ORIENTED_EDGE('',*,*,#218451,.T.); +#220867 = ORIENTED_EDGE('',*,*,#218484,.T.); +#220868 = ORIENTED_EDGE('',*,*,#218515,.T.); +#220869 = ORIENTED_EDGE('',*,*,#218546,.T.); +#220870 = ORIENTED_EDGE('',*,*,#218579,.T.); +#220871 = ORIENTED_EDGE('',*,*,#218610,.T.); +#220872 = ORIENTED_EDGE('',*,*,#218641,.T.); +#220873 = ORIENTED_EDGE('',*,*,#218672,.T.); +#220874 = ORIENTED_EDGE('',*,*,#218703,.T.); +#220875 = ORIENTED_EDGE('',*,*,#218734,.T.); +#220876 = ORIENTED_EDGE('',*,*,#218765,.T.); +#220877 = ORIENTED_EDGE('',*,*,#218796,.T.); +#220878 = ORIENTED_EDGE('',*,*,#218827,.T.); +#220879 = ORIENTED_EDGE('',*,*,#218858,.T.); +#220880 = ORIENTED_EDGE('',*,*,#218889,.T.); +#220881 = ORIENTED_EDGE('',*,*,#218920,.T.); +#220882 = ORIENTED_EDGE('',*,*,#218951,.T.); +#220883 = ORIENTED_EDGE('',*,*,#218982,.T.); +#220884 = ORIENTED_EDGE('',*,*,#219013,.T.); +#220885 = ORIENTED_EDGE('',*,*,#219044,.T.); +#220886 = ORIENTED_EDGE('',*,*,#219075,.T.); +#220887 = ORIENTED_EDGE('',*,*,#219106,.T.); +#220888 = ORIENTED_EDGE('',*,*,#219137,.T.); +#220889 = ORIENTED_EDGE('',*,*,#219168,.T.); +#220890 = ORIENTED_EDGE('',*,*,#219199,.T.); +#220891 = ORIENTED_EDGE('',*,*,#219230,.T.); +#220892 = ORIENTED_EDGE('',*,*,#219261,.T.); +#220893 = ORIENTED_EDGE('',*,*,#219292,.T.); +#220894 = ORIENTED_EDGE('',*,*,#219323,.T.); +#220895 = ORIENTED_EDGE('',*,*,#219354,.T.); +#220896 = ORIENTED_EDGE('',*,*,#219385,.T.); +#220897 = ORIENTED_EDGE('',*,*,#219416,.T.); +#220898 = ORIENTED_EDGE('',*,*,#219447,.T.); +#220899 = ORIENTED_EDGE('',*,*,#219478,.T.); +#220900 = ORIENTED_EDGE('',*,*,#219509,.T.); +#220901 = ORIENTED_EDGE('',*,*,#219540,.T.); +#220902 = ORIENTED_EDGE('',*,*,#219571,.T.); +#220903 = ORIENTED_EDGE('',*,*,#219602,.T.); +#220904 = ORIENTED_EDGE('',*,*,#219635,.T.); +#220905 = ORIENTED_EDGE('',*,*,#219666,.T.); +#220906 = ORIENTED_EDGE('',*,*,#219697,.T.); +#220907 = ORIENTED_EDGE('',*,*,#219728,.T.); +#220908 = ORIENTED_EDGE('',*,*,#219759,.T.); +#220909 = ORIENTED_EDGE('',*,*,#219790,.T.); +#220910 = ORIENTED_EDGE('',*,*,#219821,.T.); +#220911 = ORIENTED_EDGE('',*,*,#219852,.T.); +#220912 = ORIENTED_EDGE('',*,*,#219885,.T.); +#220913 = ORIENTED_EDGE('',*,*,#219916,.T.); +#220914 = ORIENTED_EDGE('',*,*,#219947,.T.); +#220915 = ORIENTED_EDGE('',*,*,#219978,.T.); +#220916 = ORIENTED_EDGE('',*,*,#220009,.T.); +#220917 = ORIENTED_EDGE('',*,*,#220042,.T.); +#220918 = ORIENTED_EDGE('',*,*,#220073,.T.); +#220919 = ORIENTED_EDGE('',*,*,#220104,.T.); +#220920 = ORIENTED_EDGE('',*,*,#220135,.T.); +#220921 = ORIENTED_EDGE('',*,*,#220166,.T.); +#220922 = ORIENTED_EDGE('',*,*,#220197,.T.); +#220923 = ORIENTED_EDGE('',*,*,#220228,.T.); +#220924 = ORIENTED_EDGE('',*,*,#220259,.T.); +#220925 = ORIENTED_EDGE('',*,*,#220290,.T.); +#220926 = ORIENTED_EDGE('',*,*,#220321,.T.); +#220927 = ORIENTED_EDGE('',*,*,#220352,.T.); +#220928 = ORIENTED_EDGE('',*,*,#220383,.T.); +#220929 = ORIENTED_EDGE('',*,*,#220414,.T.); +#220930 = ORIENTED_EDGE('',*,*,#220445,.T.); +#220931 = ORIENTED_EDGE('',*,*,#220476,.T.); +#220932 = ORIENTED_EDGE('',*,*,#220507,.T.); +#220933 = ORIENTED_EDGE('',*,*,#220538,.T.); +#220934 = ORIENTED_EDGE('',*,*,#220571,.T.); +#220935 = ORIENTED_EDGE('',*,*,#220602,.T.); +#220936 = ORIENTED_EDGE('',*,*,#220633,.T.); +#220937 = ORIENTED_EDGE('',*,*,#220666,.T.); +#220938 = ORIENTED_EDGE('',*,*,#220697,.T.); +#220939 = ORIENTED_EDGE('',*,*,#220728,.T.); +#220940 = FACE_BOUND('',#220941,.F.); +#220941 = EDGE_LOOP('',(#220942)); +#220942 = ORIENTED_EDGE('',*,*,#220759,.T.); +#220943 = PLANE('',#220944); +#220944 = AXIS2_PLACEMENT_3D('',#220945,#220946,#220947); +#220945 = CARTESIAN_POINT('',(0.,0.,1.545)); +#220946 = DIRECTION('',(0.,0.,1.)); +#220947 = DIRECTION('',(1.,0.,-0.)); +#220948 = MANIFOLD_SOLID_BREP('',#220949); +#220949 = CLOSED_SHELL('',(#220950,#220990,#221021,#221052,#221083, + #221114,#221145,#221176,#221207,#221238,#221269,#221300,#221331, + #221362,#221393,#221424,#221455,#221486,#221517,#221548,#221581, + #221612,#221643,#221674,#221705,#221736,#221767,#221798,#221829, + #221860,#221891,#221922,#221953,#221984,#222015,#222046,#222077, + #222108,#222139,#222172,#222203,#222234,#222265,#222296,#222327, + #222358,#222389,#222420,#222451,#222482,#222513,#222544,#222575, + #222606,#222637,#222670,#222692,#222725,#222758,#222828)); +#220950 = ADVANCED_FACE('',(#220951),#220985,.F.); +#220951 = FACE_BOUND('',#220952,.F.); +#220952 = EDGE_LOOP('',(#220953,#220963,#220971,#220979)); +#220953 = ORIENTED_EDGE('',*,*,#220954,.T.); +#220954 = EDGE_CURVE('',#220955,#220957,#220959,.T.); +#220955 = VERTEX_POINT('',#220956); +#220956 = CARTESIAN_POINT('',(154.5,-85.28113,0.)); +#220957 = VERTEX_POINT('',#220958); +#220958 = CARTESIAN_POINT('',(154.5,-85.28113,-3.5E-02)); +#220959 = LINE('',#220960,#220961); +#220960 = CARTESIAN_POINT('',(154.5,-85.28113,0.)); +#220961 = VECTOR('',#220962,1.); +#220962 = DIRECTION('',(0.,0.,-1.)); +#220963 = ORIENTED_EDGE('',*,*,#220964,.T.); +#220964 = EDGE_CURVE('',#220957,#220965,#220967,.T.); +#220965 = VERTEX_POINT('',#220966); +#220966 = CARTESIAN_POINT('',(154.498079,-129.219509,-3.5E-02)); +#220967 = LINE('',#220968,#220969); +#220968 = CARTESIAN_POINT('',(154.5,-85.28113,-3.5E-02)); +#220969 = VECTOR('',#220970,1.); +#220970 = DIRECTION('',(-4.372032018236E-05,-0.999999999044,0.)); +#220971 = ORIENTED_EDGE('',*,*,#220972,.F.); +#220972 = EDGE_CURVE('',#220973,#220965,#220975,.T.); +#220973 = VERTEX_POINT('',#220974); +#220974 = CARTESIAN_POINT('',(154.498079,-129.219509,0.)); +#220975 = LINE('',#220976,#220977); +#220976 = CARTESIAN_POINT('',(154.498079,-129.219509,0.)); +#220977 = VECTOR('',#220978,1.); +#220978 = DIRECTION('',(0.,0.,-1.)); +#220979 = ORIENTED_EDGE('',*,*,#220980,.F.); +#220980 = EDGE_CURVE('',#220955,#220973,#220981,.T.); +#220981 = LINE('',#220982,#220983); +#220982 = CARTESIAN_POINT('',(154.5,-85.28113,0.)); +#220983 = VECTOR('',#220984,1.); +#220984 = DIRECTION('',(-4.372032018236E-05,-0.999999999044,0.)); +#220985 = PLANE('',#220986); +#220986 = AXIS2_PLACEMENT_3D('',#220987,#220988,#220989); +#220987 = CARTESIAN_POINT('',(154.5,-85.28113,0.)); +#220988 = DIRECTION('',(-0.999999999044,4.372032018236E-05,0.)); +#220989 = DIRECTION('',(-4.372032018236E-05,-0.999999999044,0.)); +#220990 = ADVANCED_FACE('',(#220991),#221016,.F.); +#220991 = FACE_BOUND('',#220992,.F.); +#220992 = EDGE_LOOP('',(#220993,#220994,#221002,#221010)); +#220993 = ORIENTED_EDGE('',*,*,#220972,.T.); +#220994 = ORIENTED_EDGE('',*,*,#220995,.T.); +#220995 = EDGE_CURVE('',#220965,#220996,#220998,.T.); +#220996 = VERTEX_POINT('',#220997); +#220997 = CARTESIAN_POINT('',(154.483148,-129.255557,-3.5E-02)); +#220998 = LINE('',#220999,#221000); +#220999 = CARTESIAN_POINT('',(154.498079,-129.219509,-3.5E-02)); +#221000 = VECTOR('',#221001,1.); +#221001 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#221002 = ORIENTED_EDGE('',*,*,#221003,.F.); +#221003 = EDGE_CURVE('',#221004,#220996,#221006,.T.); +#221004 = VERTEX_POINT('',#221005); +#221005 = CARTESIAN_POINT('',(154.483148,-129.255557,0.)); +#221006 = LINE('',#221007,#221008); +#221007 = CARTESIAN_POINT('',(154.483148,-129.255557,0.)); +#221008 = VECTOR('',#221009,1.); +#221009 = DIRECTION('',(0.,0.,-1.)); +#221010 = ORIENTED_EDGE('',*,*,#221011,.F.); +#221011 = EDGE_CURVE('',#220973,#221004,#221012,.T.); +#221012 = LINE('',#221013,#221014); +#221013 = CARTESIAN_POINT('',(154.498079,-129.219509,0.)); +#221014 = VECTOR('',#221015,1.); +#221015 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#221016 = PLANE('',#221017); +#221017 = AXIS2_PLACEMENT_3D('',#221018,#221019,#221020); +#221018 = CARTESIAN_POINT('',(154.498079,-129.219509,0.)); +#221019 = DIRECTION('',(-0.92388470188,0.382670952168,0.)); +#221020 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#221021 = ADVANCED_FACE('',(#221022),#221047,.F.); +#221022 = FACE_BOUND('',#221023,.F.); +#221023 = EDGE_LOOP('',(#221024,#221025,#221033,#221041)); +#221024 = ORIENTED_EDGE('',*,*,#221003,.T.); +#221025 = ORIENTED_EDGE('',*,*,#221026,.T.); +#221026 = EDGE_CURVE('',#220996,#221027,#221029,.T.); +#221027 = VERTEX_POINT('',#221028); +#221028 = CARTESIAN_POINT('',(150.7,-133.041421,-3.5E-02)); +#221029 = LINE('',#221030,#221031); +#221030 = CARTESIAN_POINT('',(154.483148,-129.255557,-3.5E-02)); +#221031 = VECTOR('',#221032,1.); +#221032 = DIRECTION('',(-0.706853003486,-0.70736046784,0.)); +#221033 = ORIENTED_EDGE('',*,*,#221034,.F.); +#221034 = EDGE_CURVE('',#221035,#221027,#221037,.T.); +#221035 = VERTEX_POINT('',#221036); +#221036 = CARTESIAN_POINT('',(150.7,-133.041421,0.)); +#221037 = LINE('',#221038,#221039); +#221038 = CARTESIAN_POINT('',(150.7,-133.041421,0.)); +#221039 = VECTOR('',#221040,1.); +#221040 = DIRECTION('',(0.,0.,-1.)); +#221041 = ORIENTED_EDGE('',*,*,#221042,.F.); +#221042 = EDGE_CURVE('',#221004,#221035,#221043,.T.); +#221043 = LINE('',#221044,#221045); +#221044 = CARTESIAN_POINT('',(154.483148,-129.255557,0.)); +#221045 = VECTOR('',#221046,1.); +#221046 = DIRECTION('',(-0.706853003486,-0.70736046784,0.)); +#221047 = PLANE('',#221048); +#221048 = AXIS2_PLACEMENT_3D('',#221049,#221050,#221051); +#221049 = CARTESIAN_POINT('',(154.483148,-129.255557,0.)); +#221050 = DIRECTION('',(-0.70736046784,0.706853003486,0.)); +#221051 = DIRECTION('',(-0.706853003486,-0.70736046784,0.)); +#221052 = ADVANCED_FACE('',(#221053),#221078,.F.); +#221053 = FACE_BOUND('',#221054,.F.); +#221054 = EDGE_LOOP('',(#221055,#221056,#221064,#221072)); +#221055 = ORIENTED_EDGE('',*,*,#221034,.T.); +#221056 = ORIENTED_EDGE('',*,*,#221057,.T.); +#221057 = EDGE_CURVE('',#221027,#221058,#221060,.T.); +#221058 = VERTEX_POINT('',#221059); +#221059 = CARTESIAN_POINT('',(150.698079,-133.819509,-3.5E-02)); +#221060 = LINE('',#221061,#221062); +#221061 = CARTESIAN_POINT('',(150.7,-133.041421,-3.5E-02)); +#221062 = VECTOR('',#221063,1.); +#221063 = DIRECTION('',(-2.468864891173E-03,-0.999996952348,0.)); +#221064 = ORIENTED_EDGE('',*,*,#221065,.F.); +#221065 = EDGE_CURVE('',#221066,#221058,#221068,.T.); +#221066 = VERTEX_POINT('',#221067); +#221067 = CARTESIAN_POINT('',(150.698079,-133.819509,0.)); +#221068 = LINE('',#221069,#221070); +#221069 = CARTESIAN_POINT('',(150.698079,-133.819509,0.)); +#221070 = VECTOR('',#221071,1.); +#221071 = DIRECTION('',(0.,0.,-1.)); +#221072 = ORIENTED_EDGE('',*,*,#221073,.F.); +#221073 = EDGE_CURVE('',#221035,#221066,#221074,.T.); +#221074 = LINE('',#221075,#221076); +#221075 = CARTESIAN_POINT('',(150.7,-133.041421,0.)); +#221076 = VECTOR('',#221077,1.); +#221077 = DIRECTION('',(-2.468864891173E-03,-0.999996952348,0.)); +#221078 = PLANE('',#221079); +#221079 = AXIS2_PLACEMENT_3D('',#221080,#221081,#221082); +#221080 = CARTESIAN_POINT('',(150.7,-133.041421,0.)); +#221081 = DIRECTION('',(-0.999996952348,2.468864891173E-03,0.)); +#221082 = DIRECTION('',(-2.468864891173E-03,-0.999996952348,0.)); +#221083 = ADVANCED_FACE('',(#221084),#221109,.F.); +#221084 = FACE_BOUND('',#221085,.F.); +#221085 = EDGE_LOOP('',(#221086,#221087,#221095,#221103)); +#221086 = ORIENTED_EDGE('',*,*,#221065,.T.); +#221087 = ORIENTED_EDGE('',*,*,#221088,.T.); +#221088 = EDGE_CURVE('',#221058,#221089,#221091,.T.); +#221089 = VERTEX_POINT('',#221090); +#221090 = CARTESIAN_POINT('',(150.683147,-133.855557,-3.5E-02)); +#221091 = LINE('',#221092,#221093); +#221092 = CARTESIAN_POINT('',(150.698079,-133.819509,-3.5E-02)); +#221093 = VECTOR('',#221094,1.); +#221094 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221095 = ORIENTED_EDGE('',*,*,#221096,.F.); +#221096 = EDGE_CURVE('',#221097,#221089,#221099,.T.); +#221097 = VERTEX_POINT('',#221098); +#221098 = CARTESIAN_POINT('',(150.683147,-133.855557,0.)); +#221099 = LINE('',#221100,#221101); +#221100 = CARTESIAN_POINT('',(150.683147,-133.855557,0.)); +#221101 = VECTOR('',#221102,1.); +#221102 = DIRECTION('',(0.,0.,-1.)); +#221103 = ORIENTED_EDGE('',*,*,#221104,.F.); +#221104 = EDGE_CURVE('',#221066,#221097,#221105,.T.); +#221105 = LINE('',#221106,#221107); +#221106 = CARTESIAN_POINT('',(150.698079,-133.819509,0.)); +#221107 = VECTOR('',#221108,1.); +#221108 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221109 = PLANE('',#221110); +#221110 = AXIS2_PLACEMENT_3D('',#221111,#221112,#221113); +#221111 = CARTESIAN_POINT('',(150.698079,-133.819509,0.)); +#221112 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#221113 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221114 = ADVANCED_FACE('',(#221115),#221140,.F.); +#221115 = FACE_BOUND('',#221116,.F.); +#221116 = EDGE_LOOP('',(#221117,#221118,#221126,#221134)); +#221117 = ORIENTED_EDGE('',*,*,#221096,.T.); +#221118 = ORIENTED_EDGE('',*,*,#221119,.T.); +#221119 = EDGE_CURVE('',#221089,#221120,#221122,.T.); +#221120 = VERTEX_POINT('',#221121); +#221121 = CARTESIAN_POINT('',(150.005557,-134.533147,-3.5E-02)); +#221122 = LINE('',#221123,#221124); +#221123 = CARTESIAN_POINT('',(150.683147,-133.855557,-3.5E-02)); +#221124 = VECTOR('',#221125,1.); +#221125 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221126 = ORIENTED_EDGE('',*,*,#221127,.F.); +#221127 = EDGE_CURVE('',#221128,#221120,#221130,.T.); +#221128 = VERTEX_POINT('',#221129); +#221129 = CARTESIAN_POINT('',(150.005557,-134.533147,0.)); +#221130 = LINE('',#221131,#221132); +#221131 = CARTESIAN_POINT('',(150.005557,-134.533147,0.)); +#221132 = VECTOR('',#221133,1.); +#221133 = DIRECTION('',(0.,0.,-1.)); +#221134 = ORIENTED_EDGE('',*,*,#221135,.F.); +#221135 = EDGE_CURVE('',#221097,#221128,#221136,.T.); +#221136 = LINE('',#221137,#221138); +#221137 = CARTESIAN_POINT('',(150.683147,-133.855557,0.)); +#221138 = VECTOR('',#221139,1.); +#221139 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221140 = PLANE('',#221141); +#221141 = AXIS2_PLACEMENT_3D('',#221142,#221143,#221144); +#221142 = CARTESIAN_POINT('',(150.683147,-133.855557,0.)); +#221143 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221144 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221145 = ADVANCED_FACE('',(#221146),#221171,.F.); +#221146 = FACE_BOUND('',#221147,.F.); +#221147 = EDGE_LOOP('',(#221148,#221149,#221157,#221165)); +#221148 = ORIENTED_EDGE('',*,*,#221127,.T.); +#221149 = ORIENTED_EDGE('',*,*,#221150,.T.); +#221150 = EDGE_CURVE('',#221120,#221151,#221153,.T.); +#221151 = VERTEX_POINT('',#221152); +#221152 = CARTESIAN_POINT('',(149.969509,-134.548079,-3.5E-02)); +#221153 = LINE('',#221154,#221155); +#221154 = CARTESIAN_POINT('',(150.005557,-134.533147,-3.5E-02)); +#221155 = VECTOR('',#221156,1.); +#221156 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#221157 = ORIENTED_EDGE('',*,*,#221158,.F.); +#221158 = EDGE_CURVE('',#221159,#221151,#221161,.T.); +#221159 = VERTEX_POINT('',#221160); +#221160 = CARTESIAN_POINT('',(149.969509,-134.548079,0.)); +#221161 = LINE('',#221162,#221163); +#221162 = CARTESIAN_POINT('',(149.969509,-134.548079,0.)); +#221163 = VECTOR('',#221164,1.); +#221164 = DIRECTION('',(0.,0.,-1.)); +#221165 = ORIENTED_EDGE('',*,*,#221166,.F.); +#221166 = EDGE_CURVE('',#221128,#221159,#221167,.T.); +#221167 = LINE('',#221168,#221169); +#221168 = CARTESIAN_POINT('',(150.005557,-134.533147,0.)); +#221169 = VECTOR('',#221170,1.); +#221170 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#221171 = PLANE('',#221172); +#221172 = AXIS2_PLACEMENT_3D('',#221173,#221174,#221175); +#221173 = CARTESIAN_POINT('',(150.005557,-134.533147,0.)); +#221174 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#221175 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#221176 = ADVANCED_FACE('',(#221177),#221202,.F.); +#221177 = FACE_BOUND('',#221178,.F.); +#221178 = EDGE_LOOP('',(#221179,#221180,#221188,#221196)); +#221179 = ORIENTED_EDGE('',*,*,#221158,.T.); +#221180 = ORIENTED_EDGE('',*,*,#221181,.T.); +#221181 = EDGE_CURVE('',#221151,#221182,#221184,.T.); +#221182 = VERTEX_POINT('',#221183); +#221183 = CARTESIAN_POINT('',(148.581421,-134.55,-3.5E-02)); +#221184 = LINE('',#221185,#221186); +#221185 = CARTESIAN_POINT('',(149.969509,-134.548079,-3.5E-02)); +#221186 = VECTOR('',#221187,1.); +#221187 = DIRECTION('',(-0.999999042387,-1.383916697238E-03,0.)); +#221188 = ORIENTED_EDGE('',*,*,#221189,.F.); +#221189 = EDGE_CURVE('',#221190,#221182,#221192,.T.); +#221190 = VERTEX_POINT('',#221191); +#221191 = CARTESIAN_POINT('',(148.581421,-134.55,0.)); +#221192 = LINE('',#221193,#221194); +#221193 = CARTESIAN_POINT('',(148.581421,-134.55,0.)); +#221194 = VECTOR('',#221195,1.); +#221195 = DIRECTION('',(0.,0.,-1.)); +#221196 = ORIENTED_EDGE('',*,*,#221197,.F.); +#221197 = EDGE_CURVE('',#221159,#221190,#221198,.T.); +#221198 = LINE('',#221199,#221200); +#221199 = CARTESIAN_POINT('',(149.969509,-134.548079,0.)); +#221200 = VECTOR('',#221201,1.); +#221201 = DIRECTION('',(-0.999999042387,-1.383916697238E-03,0.)); +#221202 = PLANE('',#221203); +#221203 = AXIS2_PLACEMENT_3D('',#221204,#221205,#221206); +#221204 = CARTESIAN_POINT('',(149.969509,-134.548079,0.)); +#221205 = DIRECTION('',(-1.383916697238E-03,0.999999042387,0.)); +#221206 = DIRECTION('',(-0.999999042387,-1.383916697238E-03,0.)); +#221207 = ADVANCED_FACE('',(#221208),#221233,.F.); +#221208 = FACE_BOUND('',#221209,.F.); +#221209 = EDGE_LOOP('',(#221210,#221211,#221219,#221227)); +#221210 = ORIENTED_EDGE('',*,*,#221189,.T.); +#221211 = ORIENTED_EDGE('',*,*,#221212,.T.); +#221212 = EDGE_CURVE('',#221182,#221213,#221215,.T.); +#221213 = VERTEX_POINT('',#221214); +#221214 = CARTESIAN_POINT('',(147.94,-135.191422,-3.5E-02)); +#221215 = LINE('',#221216,#221217); +#221216 = CARTESIAN_POINT('',(148.581421,-134.55,-3.5E-02)); +#221217 = VECTOR('',#221218,1.); +#221218 = DIRECTION('',(-0.707106229983,-0.707107332389,0.)); +#221219 = ORIENTED_EDGE('',*,*,#221220,.F.); +#221220 = EDGE_CURVE('',#221221,#221213,#221223,.T.); +#221221 = VERTEX_POINT('',#221222); +#221222 = CARTESIAN_POINT('',(147.94,-135.191422,0.)); +#221223 = LINE('',#221224,#221225); +#221224 = CARTESIAN_POINT('',(147.94,-135.191422,0.)); +#221225 = VECTOR('',#221226,1.); +#221226 = DIRECTION('',(0.,0.,-1.)); +#221227 = ORIENTED_EDGE('',*,*,#221228,.F.); +#221228 = EDGE_CURVE('',#221190,#221221,#221229,.T.); +#221229 = LINE('',#221230,#221231); +#221230 = CARTESIAN_POINT('',(148.581421,-134.55,0.)); +#221231 = VECTOR('',#221232,1.); +#221232 = DIRECTION('',(-0.707106229983,-0.707107332389,0.)); +#221233 = PLANE('',#221234); +#221234 = AXIS2_PLACEMENT_3D('',#221235,#221236,#221237); +#221235 = CARTESIAN_POINT('',(148.581421,-134.55,0.)); +#221236 = DIRECTION('',(-0.707107332389,0.707106229983,0.)); +#221237 = DIRECTION('',(-0.707106229983,-0.707107332389,0.)); +#221238 = ADVANCED_FACE('',(#221239),#221264,.F.); +#221239 = FACE_BOUND('',#221240,.F.); +#221240 = EDGE_LOOP('',(#221241,#221242,#221250,#221258)); +#221241 = ORIENTED_EDGE('',*,*,#221220,.T.); +#221242 = ORIENTED_EDGE('',*,*,#221243,.T.); +#221243 = EDGE_CURVE('',#221213,#221244,#221246,.T.); +#221244 = VERTEX_POINT('',#221245); +#221245 = CARTESIAN_POINT('',(147.938079,-135.659509,-3.5E-02)); +#221246 = LINE('',#221247,#221248); +#221247 = CARTESIAN_POINT('',(147.94,-135.191422,-3.5E-02)); +#221248 = VECTOR('',#221249,1.); +#221249 = DIRECTION('',(-4.103903383727E-03,-0.999991578953,0.)); +#221250 = ORIENTED_EDGE('',*,*,#221251,.F.); +#221251 = EDGE_CURVE('',#221252,#221244,#221254,.T.); +#221252 = VERTEX_POINT('',#221253); +#221253 = CARTESIAN_POINT('',(147.938079,-135.659509,0.)); +#221254 = LINE('',#221255,#221256); +#221255 = CARTESIAN_POINT('',(147.938079,-135.659509,0.)); +#221256 = VECTOR('',#221257,1.); +#221257 = DIRECTION('',(0.,0.,-1.)); +#221258 = ORIENTED_EDGE('',*,*,#221259,.F.); +#221259 = EDGE_CURVE('',#221221,#221252,#221260,.T.); +#221260 = LINE('',#221261,#221262); +#221261 = CARTESIAN_POINT('',(147.94,-135.191422,0.)); +#221262 = VECTOR('',#221263,1.); +#221263 = DIRECTION('',(-4.103903383727E-03,-0.999991578953,0.)); +#221264 = PLANE('',#221265); +#221265 = AXIS2_PLACEMENT_3D('',#221266,#221267,#221268); +#221266 = CARTESIAN_POINT('',(147.94,-135.191422,0.)); +#221267 = DIRECTION('',(-0.999991578953,4.103903383727E-03,0.)); +#221268 = DIRECTION('',(-4.103903383727E-03,-0.999991578953,0.)); +#221269 = ADVANCED_FACE('',(#221270),#221295,.F.); +#221270 = FACE_BOUND('',#221271,.F.); +#221271 = EDGE_LOOP('',(#221272,#221273,#221281,#221289)); +#221272 = ORIENTED_EDGE('',*,*,#221251,.T.); +#221273 = ORIENTED_EDGE('',*,*,#221274,.T.); +#221274 = EDGE_CURVE('',#221244,#221275,#221277,.T.); +#221275 = VERTEX_POINT('',#221276); +#221276 = CARTESIAN_POINT('',(147.923147,-135.695557,-3.5E-02)); +#221277 = LINE('',#221278,#221279); +#221278 = CARTESIAN_POINT('',(147.938079,-135.659509,-3.5E-02)); +#221279 = VECTOR('',#221280,1.); +#221280 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221281 = ORIENTED_EDGE('',*,*,#221282,.F.); +#221282 = EDGE_CURVE('',#221283,#221275,#221285,.T.); +#221283 = VERTEX_POINT('',#221284); +#221284 = CARTESIAN_POINT('',(147.923147,-135.695557,0.)); +#221285 = LINE('',#221286,#221287); +#221286 = CARTESIAN_POINT('',(147.923147,-135.695557,0.)); +#221287 = VECTOR('',#221288,1.); +#221288 = DIRECTION('',(0.,0.,-1.)); +#221289 = ORIENTED_EDGE('',*,*,#221290,.F.); +#221290 = EDGE_CURVE('',#221252,#221283,#221291,.T.); +#221291 = LINE('',#221292,#221293); +#221292 = CARTESIAN_POINT('',(147.938079,-135.659509,0.)); +#221293 = VECTOR('',#221294,1.); +#221294 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221295 = PLANE('',#221296); +#221296 = AXIS2_PLACEMENT_3D('',#221297,#221298,#221299); +#221297 = CARTESIAN_POINT('',(147.938079,-135.659509,0.)); +#221298 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#221299 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#221300 = ADVANCED_FACE('',(#221301),#221326,.F.); +#221301 = FACE_BOUND('',#221302,.F.); +#221302 = EDGE_LOOP('',(#221303,#221304,#221312,#221320)); +#221303 = ORIENTED_EDGE('',*,*,#221282,.T.); +#221304 = ORIENTED_EDGE('',*,*,#221305,.T.); +#221305 = EDGE_CURVE('',#221275,#221306,#221308,.T.); +#221306 = VERTEX_POINT('',#221307); +#221307 = CARTESIAN_POINT('',(136.535557,-147.083147,-3.5E-02)); +#221308 = LINE('',#221309,#221310); +#221309 = CARTESIAN_POINT('',(147.923147,-135.695557,-3.5E-02)); +#221310 = VECTOR('',#221311,1.); +#221311 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221312 = ORIENTED_EDGE('',*,*,#221313,.F.); +#221313 = EDGE_CURVE('',#221314,#221306,#221316,.T.); +#221314 = VERTEX_POINT('',#221315); +#221315 = CARTESIAN_POINT('',(136.535557,-147.083147,0.)); +#221316 = LINE('',#221317,#221318); +#221317 = CARTESIAN_POINT('',(136.535557,-147.083147,0.)); +#221318 = VECTOR('',#221319,1.); +#221319 = DIRECTION('',(0.,0.,-1.)); +#221320 = ORIENTED_EDGE('',*,*,#221321,.F.); +#221321 = EDGE_CURVE('',#221283,#221314,#221322,.T.); +#221322 = LINE('',#221323,#221324); +#221323 = CARTESIAN_POINT('',(147.923147,-135.695557,0.)); +#221324 = VECTOR('',#221325,1.); +#221325 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221326 = PLANE('',#221327); +#221327 = AXIS2_PLACEMENT_3D('',#221328,#221329,#221330); +#221328 = CARTESIAN_POINT('',(147.923147,-135.695557,0.)); +#221329 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221330 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221331 = ADVANCED_FACE('',(#221332),#221357,.F.); +#221332 = FACE_BOUND('',#221333,.F.); +#221333 = EDGE_LOOP('',(#221334,#221335,#221343,#221351)); +#221334 = ORIENTED_EDGE('',*,*,#221313,.T.); +#221335 = ORIENTED_EDGE('',*,*,#221336,.T.); +#221336 = EDGE_CURVE('',#221306,#221337,#221339,.T.); +#221337 = VERTEX_POINT('',#221338); +#221338 = CARTESIAN_POINT('',(136.499509,-147.098079,-3.5E-02)); +#221339 = LINE('',#221340,#221341); +#221340 = CARTESIAN_POINT('',(136.535557,-147.083147,-3.5E-02)); +#221341 = VECTOR('',#221342,1.); +#221342 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#221343 = ORIENTED_EDGE('',*,*,#221344,.F.); +#221344 = EDGE_CURVE('',#221345,#221337,#221347,.T.); +#221345 = VERTEX_POINT('',#221346); +#221346 = CARTESIAN_POINT('',(136.499509,-147.098079,0.)); +#221347 = LINE('',#221348,#221349); +#221348 = CARTESIAN_POINT('',(136.499509,-147.098079,0.)); +#221349 = VECTOR('',#221350,1.); +#221350 = DIRECTION('',(0.,0.,-1.)); +#221351 = ORIENTED_EDGE('',*,*,#221352,.F.); +#221352 = EDGE_CURVE('',#221314,#221345,#221353,.T.); +#221353 = LINE('',#221354,#221355); +#221354 = CARTESIAN_POINT('',(136.535557,-147.083147,0.)); +#221355 = VECTOR('',#221356,1.); +#221356 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#221357 = PLANE('',#221358); +#221358 = AXIS2_PLACEMENT_3D('',#221359,#221360,#221361); +#221359 = CARTESIAN_POINT('',(136.535557,-147.083147,0.)); +#221360 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#221361 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#221362 = ADVANCED_FACE('',(#221363),#221388,.F.); +#221363 = FACE_BOUND('',#221364,.F.); +#221364 = EDGE_LOOP('',(#221365,#221366,#221374,#221382)); +#221365 = ORIENTED_EDGE('',*,*,#221344,.T.); +#221366 = ORIENTED_EDGE('',*,*,#221367,.T.); +#221367 = EDGE_CURVE('',#221337,#221368,#221370,.T.); +#221368 = VERTEX_POINT('',#221369); +#221369 = CARTESIAN_POINT('',(125.105287,-147.1,-3.5E-02)); +#221370 = LINE('',#221371,#221372); +#221371 = CARTESIAN_POINT('',(136.499509,-147.098079,-3.5E-02)); +#221372 = VECTOR('',#221373,1.); +#221373 = DIRECTION('',(-0.999999985788,-1.685942201829E-04,0.)); +#221374 = ORIENTED_EDGE('',*,*,#221375,.F.); +#221375 = EDGE_CURVE('',#221376,#221368,#221378,.T.); +#221376 = VERTEX_POINT('',#221377); +#221377 = CARTESIAN_POINT('',(125.105287,-147.1,0.)); +#221378 = LINE('',#221379,#221380); +#221379 = CARTESIAN_POINT('',(125.105287,-147.1,0.)); +#221380 = VECTOR('',#221381,1.); +#221381 = DIRECTION('',(0.,0.,-1.)); +#221382 = ORIENTED_EDGE('',*,*,#221383,.F.); +#221383 = EDGE_CURVE('',#221345,#221376,#221384,.T.); +#221384 = LINE('',#221385,#221386); +#221385 = CARTESIAN_POINT('',(136.499509,-147.098079,0.)); +#221386 = VECTOR('',#221387,1.); +#221387 = DIRECTION('',(-0.999999985788,-1.685942201829E-04,0.)); +#221388 = PLANE('',#221389); +#221389 = AXIS2_PLACEMENT_3D('',#221390,#221391,#221392); +#221390 = CARTESIAN_POINT('',(136.499509,-147.098079,0.)); +#221391 = DIRECTION('',(-1.685942201829E-04,0.999999985788,0.)); +#221392 = DIRECTION('',(-0.999999985788,-1.685942201829E-04,0.)); +#221393 = ADVANCED_FACE('',(#221394),#221419,.F.); +#221394 = FACE_BOUND('',#221395,.F.); +#221395 = EDGE_LOOP('',(#221396,#221397,#221405,#221413)); +#221396 = ORIENTED_EDGE('',*,*,#221375,.T.); +#221397 = ORIENTED_EDGE('',*,*,#221398,.T.); +#221398 = EDGE_CURVE('',#221368,#221399,#221401,.T.); +#221399 = VERTEX_POINT('',#221400); +#221400 = CARTESIAN_POINT('',(123.0845,-149.120787,-3.5E-02)); +#221401 = LINE('',#221402,#221403); +#221402 = CARTESIAN_POINT('',(125.105287,-147.1,-3.5E-02)); +#221403 = VECTOR('',#221404,1.); +#221404 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221405 = ORIENTED_EDGE('',*,*,#221406,.F.); +#221406 = EDGE_CURVE('',#221407,#221399,#221409,.T.); +#221407 = VERTEX_POINT('',#221408); +#221408 = CARTESIAN_POINT('',(123.0845,-149.120787,0.)); +#221409 = LINE('',#221410,#221411); +#221410 = CARTESIAN_POINT('',(123.0845,-149.120787,0.)); +#221411 = VECTOR('',#221412,1.); +#221412 = DIRECTION('',(0.,0.,-1.)); +#221413 = ORIENTED_EDGE('',*,*,#221414,.F.); +#221414 = EDGE_CURVE('',#221376,#221407,#221415,.T.); +#221415 = LINE('',#221416,#221417); +#221416 = CARTESIAN_POINT('',(125.105287,-147.1,0.)); +#221417 = VECTOR('',#221418,1.); +#221418 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221419 = PLANE('',#221420); +#221420 = AXIS2_PLACEMENT_3D('',#221421,#221422,#221423); +#221421 = CARTESIAN_POINT('',(125.105287,-147.1,0.)); +#221422 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221423 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#221424 = ADVANCED_FACE('',(#221425),#221450,.F.); +#221425 = FACE_BOUND('',#221426,.F.); +#221426 = EDGE_LOOP('',(#221427,#221428,#221436,#221444)); +#221427 = ORIENTED_EDGE('',*,*,#221406,.T.); +#221428 = ORIENTED_EDGE('',*,*,#221429,.T.); +#221429 = EDGE_CURVE('',#221399,#221430,#221432,.T.); +#221430 = VERTEX_POINT('',#221431); +#221431 = CARTESIAN_POINT('',(123.0845,-150.943078,-3.5E-02)); +#221432 = LINE('',#221433,#221434); +#221433 = CARTESIAN_POINT('',(123.0845,-149.120787,-3.5E-02)); +#221434 = VECTOR('',#221435,1.); +#221435 = DIRECTION('',(0.,-1.,0.)); +#221436 = ORIENTED_EDGE('',*,*,#221437,.F.); +#221437 = EDGE_CURVE('',#221438,#221430,#221440,.T.); +#221438 = VERTEX_POINT('',#221439); +#221439 = CARTESIAN_POINT('',(123.0845,-150.943078,0.)); +#221440 = LINE('',#221441,#221442); +#221441 = CARTESIAN_POINT('',(123.0845,-150.943078,0.)); +#221442 = VECTOR('',#221443,1.); +#221443 = DIRECTION('',(0.,0.,-1.)); +#221444 = ORIENTED_EDGE('',*,*,#221445,.F.); +#221445 = EDGE_CURVE('',#221407,#221438,#221446,.T.); +#221446 = LINE('',#221447,#221448); +#221447 = CARTESIAN_POINT('',(123.0845,-149.120787,0.)); +#221448 = VECTOR('',#221449,1.); +#221449 = DIRECTION('',(0.,-1.,0.)); +#221450 = PLANE('',#221451); +#221451 = AXIS2_PLACEMENT_3D('',#221452,#221453,#221454); +#221452 = CARTESIAN_POINT('',(123.0845,-149.120787,0.)); +#221453 = DIRECTION('',(-1.,-0.,-0.)); +#221454 = DIRECTION('',(0.,-1.,0.)); +#221455 = ADVANCED_FACE('',(#221456),#221481,.F.); +#221456 = FACE_BOUND('',#221457,.F.); +#221457 = EDGE_LOOP('',(#221458,#221459,#221467,#221475)); +#221458 = ORIENTED_EDGE('',*,*,#221437,.T.); +#221459 = ORIENTED_EDGE('',*,*,#221460,.T.); +#221460 = EDGE_CURVE('',#221430,#221461,#221463,.T.); +#221461 = VERTEX_POINT('',#221462); +#221462 = CARTESIAN_POINT('',(124.641422,-152.5,-3.5E-02)); +#221463 = LINE('',#221464,#221465); +#221464 = CARTESIAN_POINT('',(123.0845,-150.943078,-3.5E-02)); +#221465 = VECTOR('',#221466,1.); +#221466 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#221467 = ORIENTED_EDGE('',*,*,#221468,.F.); +#221468 = EDGE_CURVE('',#221469,#221461,#221471,.T.); +#221469 = VERTEX_POINT('',#221470); +#221470 = CARTESIAN_POINT('',(124.641422,-152.5,0.)); +#221471 = LINE('',#221472,#221473); +#221472 = CARTESIAN_POINT('',(124.641422,-152.5,0.)); +#221473 = VECTOR('',#221474,1.); +#221474 = DIRECTION('',(0.,0.,-1.)); +#221475 = ORIENTED_EDGE('',*,*,#221476,.F.); +#221476 = EDGE_CURVE('',#221438,#221469,#221477,.T.); +#221477 = LINE('',#221478,#221479); +#221478 = CARTESIAN_POINT('',(123.0845,-150.943078,0.)); +#221479 = VECTOR('',#221480,1.); +#221480 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#221481 = PLANE('',#221482); +#221482 = AXIS2_PLACEMENT_3D('',#221483,#221484,#221485); +#221483 = CARTESIAN_POINT('',(123.0845,-150.943078,0.)); +#221484 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#221485 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#221486 = ADVANCED_FACE('',(#221487),#221512,.F.); +#221487 = FACE_BOUND('',#221488,.F.); +#221488 = EDGE_LOOP('',(#221489,#221490,#221498,#221506)); +#221489 = ORIENTED_EDGE('',*,*,#221468,.T.); +#221490 = ORIENTED_EDGE('',*,*,#221491,.T.); +#221491 = EDGE_CURVE('',#221461,#221492,#221494,.T.); +#221492 = VERTEX_POINT('',#221493); +#221493 = CARTESIAN_POINT('',(125.026048,-152.5,-3.5E-02)); +#221494 = LINE('',#221495,#221496); +#221495 = CARTESIAN_POINT('',(124.641422,-152.5,-3.5E-02)); +#221496 = VECTOR('',#221497,1.); +#221497 = DIRECTION('',(1.,0.,0.)); +#221498 = ORIENTED_EDGE('',*,*,#221499,.F.); +#221499 = EDGE_CURVE('',#221500,#221492,#221502,.T.); +#221500 = VERTEX_POINT('',#221501); +#221501 = CARTESIAN_POINT('',(125.026048,-152.5,0.)); +#221502 = LINE('',#221503,#221504); +#221503 = CARTESIAN_POINT('',(125.026048,-152.5,0.)); +#221504 = VECTOR('',#221505,1.); +#221505 = DIRECTION('',(0.,0.,-1.)); +#221506 = ORIENTED_EDGE('',*,*,#221507,.F.); +#221507 = EDGE_CURVE('',#221469,#221500,#221508,.T.); +#221508 = LINE('',#221509,#221510); +#221509 = CARTESIAN_POINT('',(124.641422,-152.5,0.)); +#221510 = VECTOR('',#221511,1.); +#221511 = DIRECTION('',(1.,0.,0.)); +#221512 = PLANE('',#221513); +#221513 = AXIS2_PLACEMENT_3D('',#221514,#221515,#221516); +#221514 = CARTESIAN_POINT('',(124.641422,-152.5,0.)); +#221515 = DIRECTION('',(0.,-1.,0.)); +#221516 = DIRECTION('',(1.,0.,0.)); +#221517 = ADVANCED_FACE('',(#221518),#221543,.F.); +#221518 = FACE_BOUND('',#221519,.F.); +#221519 = EDGE_LOOP('',(#221520,#221521,#221529,#221537)); +#221520 = ORIENTED_EDGE('',*,*,#221499,.T.); +#221521 = ORIENTED_EDGE('',*,*,#221522,.T.); +#221522 = EDGE_CURVE('',#221492,#221523,#221525,.T.); +#221523 = VERTEX_POINT('',#221524); +#221524 = CARTESIAN_POINT('',(125.030015,-152.485195,-3.5E-02)); +#221525 = LINE('',#221526,#221527); +#221526 = CARTESIAN_POINT('',(125.026048,-152.5,-3.5E-02)); +#221527 = VECTOR('',#221528,1.); +#221528 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#221529 = ORIENTED_EDGE('',*,*,#221530,.F.); +#221530 = EDGE_CURVE('',#221531,#221523,#221533,.T.); +#221531 = VERTEX_POINT('',#221532); +#221532 = CARTESIAN_POINT('',(125.030015,-152.485195,0.)); +#221533 = LINE('',#221534,#221535); +#221534 = CARTESIAN_POINT('',(125.030015,-152.485195,0.)); +#221535 = VECTOR('',#221536,1.); +#221536 = DIRECTION('',(0.,0.,-1.)); +#221537 = ORIENTED_EDGE('',*,*,#221538,.F.); +#221538 = EDGE_CURVE('',#221500,#221531,#221539,.T.); +#221539 = LINE('',#221540,#221541); +#221540 = CARTESIAN_POINT('',(125.026048,-152.5,0.)); +#221541 = VECTOR('',#221542,1.); +#221542 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#221543 = PLANE('',#221544); +#221544 = AXIS2_PLACEMENT_3D('',#221545,#221546,#221547); +#221545 = CARTESIAN_POINT('',(125.026048,-152.5,0.)); +#221546 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#221547 = DIRECTION('',(0.258819788119,0.965925627198,0.)); +#221548 = ADVANCED_FACE('',(#221549),#221576,.T.); +#221549 = FACE_BOUND('',#221550,.F.); +#221550 = EDGE_LOOP('',(#221551,#221552,#221561,#221569)); +#221551 = ORIENTED_EDGE('',*,*,#221530,.T.); +#221552 = ORIENTED_EDGE('',*,*,#221553,.T.); +#221553 = EDGE_CURVE('',#221523,#221554,#221556,.T.); +#221554 = VERTEX_POINT('',#221555); +#221555 = CARTESIAN_POINT('',(125.030015,-152.714805,-3.5E-02)); +#221556 = CIRCLE('',#221557,0.299999850918); +#221557 = AXIS2_PLACEMENT_3D('',#221558,#221559,#221560); +#221558 = CARTESIAN_POINT('',(125.30717871069,-152.6,-3.5E-02)); +#221559 = DIRECTION('',(0.,0.,-1.)); +#221560 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#221561 = ORIENTED_EDGE('',*,*,#221562,.F.); +#221562 = EDGE_CURVE('',#221563,#221554,#221565,.T.); +#221563 = VERTEX_POINT('',#221564); +#221564 = CARTESIAN_POINT('',(125.030015,-152.714805,0.)); +#221565 = LINE('',#221566,#221567); +#221566 = CARTESIAN_POINT('',(125.030015,-152.714805,0.)); +#221567 = VECTOR('',#221568,1.); +#221568 = DIRECTION('',(0.,0.,-1.)); +#221569 = ORIENTED_EDGE('',*,*,#221570,.F.); +#221570 = EDGE_CURVE('',#221531,#221563,#221571,.T.); +#221571 = CIRCLE('',#221572,0.299999850918); +#221572 = AXIS2_PLACEMENT_3D('',#221573,#221574,#221575); +#221573 = CARTESIAN_POINT('',(125.30717871069,-152.6,0.)); +#221574 = DIRECTION('',(0.,0.,-1.)); +#221575 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#221576 = CYLINDRICAL_SURFACE('',#221577,0.299999850918); +#221577 = AXIS2_PLACEMENT_3D('',#221578,#221579,#221580); +#221578 = CARTESIAN_POINT('',(125.30717871069,-152.6,0.)); +#221579 = DIRECTION('',(-0.,-0.,1.)); +#221580 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#221581 = ADVANCED_FACE('',(#221582),#221607,.F.); +#221582 = FACE_BOUND('',#221583,.F.); +#221583 = EDGE_LOOP('',(#221584,#221585,#221593,#221601)); +#221584 = ORIENTED_EDGE('',*,*,#221562,.T.); +#221585 = ORIENTED_EDGE('',*,*,#221586,.T.); +#221586 = EDGE_CURVE('',#221554,#221587,#221589,.T.); +#221587 = VERTEX_POINT('',#221588); +#221588 = CARTESIAN_POINT('',(125.026048,-152.7,-3.5E-02)); +#221589 = LINE('',#221590,#221591); +#221590 = CARTESIAN_POINT('',(125.030015,-152.714805,-3.5E-02)); +#221591 = VECTOR('',#221592,1.); +#221592 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#221593 = ORIENTED_EDGE('',*,*,#221594,.F.); +#221594 = EDGE_CURVE('',#221595,#221587,#221597,.T.); +#221595 = VERTEX_POINT('',#221596); +#221596 = CARTESIAN_POINT('',(125.026048,-152.7,0.)); +#221597 = LINE('',#221598,#221599); +#221598 = CARTESIAN_POINT('',(125.026048,-152.7,0.)); +#221599 = VECTOR('',#221600,1.); +#221600 = DIRECTION('',(0.,0.,-1.)); +#221601 = ORIENTED_EDGE('',*,*,#221602,.F.); +#221602 = EDGE_CURVE('',#221563,#221595,#221603,.T.); +#221603 = LINE('',#221604,#221605); +#221604 = CARTESIAN_POINT('',(125.030015,-152.714805,0.)); +#221605 = VECTOR('',#221606,1.); +#221606 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#221607 = PLANE('',#221608); +#221608 = AXIS2_PLACEMENT_3D('',#221609,#221610,#221611); +#221609 = CARTESIAN_POINT('',(125.030015,-152.714805,0.)); +#221610 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#221611 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#221612 = ADVANCED_FACE('',(#221613),#221638,.F.); +#221613 = FACE_BOUND('',#221614,.F.); +#221614 = EDGE_LOOP('',(#221615,#221616,#221624,#221632)); +#221615 = ORIENTED_EDGE('',*,*,#221594,.T.); +#221616 = ORIENTED_EDGE('',*,*,#221617,.T.); +#221617 = EDGE_CURVE('',#221587,#221618,#221620,.T.); +#221618 = VERTEX_POINT('',#221619); +#221619 = CARTESIAN_POINT('',(124.580491,-152.698079,-3.5E-02)); +#221620 = LINE('',#221621,#221622); +#221621 = CARTESIAN_POINT('',(125.026048,-152.7,-3.5E-02)); +#221622 = VECTOR('',#221623,1.); +#221623 = DIRECTION('',(-0.999990705797,4.311417272803E-03,0.)); +#221624 = ORIENTED_EDGE('',*,*,#221625,.F.); +#221625 = EDGE_CURVE('',#221626,#221618,#221628,.T.); +#221626 = VERTEX_POINT('',#221627); +#221627 = CARTESIAN_POINT('',(124.580491,-152.698079,0.)); +#221628 = LINE('',#221629,#221630); +#221629 = CARTESIAN_POINT('',(124.580491,-152.698079,0.)); +#221630 = VECTOR('',#221631,1.); +#221631 = DIRECTION('',(0.,0.,-1.)); +#221632 = ORIENTED_EDGE('',*,*,#221633,.F.); +#221633 = EDGE_CURVE('',#221595,#221626,#221634,.T.); +#221634 = LINE('',#221635,#221636); +#221635 = CARTESIAN_POINT('',(125.026048,-152.7,0.)); +#221636 = VECTOR('',#221637,1.); +#221637 = DIRECTION('',(-0.999990705797,4.311417272803E-03,0.)); +#221638 = PLANE('',#221639); +#221639 = AXIS2_PLACEMENT_3D('',#221640,#221641,#221642); +#221640 = CARTESIAN_POINT('',(125.026048,-152.7,0.)); +#221641 = DIRECTION('',(4.311417272803E-03,0.999990705797,0.)); +#221642 = DIRECTION('',(-0.999990705797,4.311417272803E-03,0.)); +#221643 = ADVANCED_FACE('',(#221644),#221669,.F.); +#221644 = FACE_BOUND('',#221645,.F.); +#221645 = EDGE_LOOP('',(#221646,#221647,#221655,#221663)); +#221646 = ORIENTED_EDGE('',*,*,#221625,.T.); +#221647 = ORIENTED_EDGE('',*,*,#221648,.T.); +#221648 = EDGE_CURVE('',#221618,#221649,#221651,.T.); +#221649 = VERTEX_POINT('',#221650); +#221650 = CARTESIAN_POINT('',(124.544443,-152.683147,-3.5E-02)); +#221651 = LINE('',#221652,#221653); +#221652 = CARTESIAN_POINT('',(124.580491,-152.698079,-3.5E-02)); +#221653 = VECTOR('',#221654,1.); +#221654 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#221655 = ORIENTED_EDGE('',*,*,#221656,.F.); +#221656 = EDGE_CURVE('',#221657,#221649,#221659,.T.); +#221657 = VERTEX_POINT('',#221658); +#221658 = CARTESIAN_POINT('',(124.544443,-152.683147,0.)); +#221659 = LINE('',#221660,#221661); +#221660 = CARTESIAN_POINT('',(124.544443,-152.683147,0.)); +#221661 = VECTOR('',#221662,1.); +#221662 = DIRECTION('',(0.,0.,-1.)); +#221663 = ORIENTED_EDGE('',*,*,#221664,.F.); +#221664 = EDGE_CURVE('',#221626,#221657,#221665,.T.); +#221665 = LINE('',#221666,#221667); +#221666 = CARTESIAN_POINT('',(124.580491,-152.698079,0.)); +#221667 = VECTOR('',#221668,1.); +#221668 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#221669 = PLANE('',#221670); +#221670 = AXIS2_PLACEMENT_3D('',#221671,#221672,#221673); +#221671 = CARTESIAN_POINT('',(124.580491,-152.698079,0.)); +#221672 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221673 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#221674 = ADVANCED_FACE('',(#221675),#221700,.F.); +#221675 = FACE_BOUND('',#221676,.F.); +#221676 = EDGE_LOOP('',(#221677,#221678,#221686,#221694)); +#221677 = ORIENTED_EDGE('',*,*,#221656,.T.); +#221678 = ORIENTED_EDGE('',*,*,#221679,.T.); +#221679 = EDGE_CURVE('',#221649,#221680,#221682,.T.); +#221680 = VERTEX_POINT('',#221681); +#221681 = CARTESIAN_POINT('',(122.901353,-151.040057,-3.5E-02)); +#221682 = LINE('',#221683,#221684); +#221683 = CARTESIAN_POINT('',(124.544443,-152.683147,-3.5E-02)); +#221684 = VECTOR('',#221685,1.); +#221685 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221686 = ORIENTED_EDGE('',*,*,#221687,.F.); +#221687 = EDGE_CURVE('',#221688,#221680,#221690,.T.); +#221688 = VERTEX_POINT('',#221689); +#221689 = CARTESIAN_POINT('',(122.901353,-151.040057,0.)); +#221690 = LINE('',#221691,#221692); +#221691 = CARTESIAN_POINT('',(122.901353,-151.040057,0.)); +#221692 = VECTOR('',#221693,1.); +#221693 = DIRECTION('',(0.,0.,-1.)); +#221694 = ORIENTED_EDGE('',*,*,#221695,.F.); +#221695 = EDGE_CURVE('',#221657,#221688,#221696,.T.); +#221696 = LINE('',#221697,#221698); +#221697 = CARTESIAN_POINT('',(124.544443,-152.683147,0.)); +#221698 = VECTOR('',#221699,1.); +#221699 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221700 = PLANE('',#221701); +#221701 = AXIS2_PLACEMENT_3D('',#221702,#221703,#221704); +#221702 = CARTESIAN_POINT('',(124.544443,-152.683147,0.)); +#221703 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221704 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#221705 = ADVANCED_FACE('',(#221706),#221731,.F.); +#221706 = FACE_BOUND('',#221707,.F.); +#221707 = EDGE_LOOP('',(#221708,#221709,#221717,#221725)); +#221708 = ORIENTED_EDGE('',*,*,#221687,.T.); +#221709 = ORIENTED_EDGE('',*,*,#221710,.T.); +#221710 = EDGE_CURVE('',#221680,#221711,#221713,.T.); +#221711 = VERTEX_POINT('',#221712); +#221712 = CARTESIAN_POINT('',(122.886421,-151.004009,-3.5E-02)); +#221713 = LINE('',#221714,#221715); +#221714 = CARTESIAN_POINT('',(122.901353,-151.040057,-3.5E-02)); +#221715 = VECTOR('',#221716,1.); +#221716 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#221717 = ORIENTED_EDGE('',*,*,#221718,.F.); +#221718 = EDGE_CURVE('',#221719,#221711,#221721,.T.); +#221719 = VERTEX_POINT('',#221720); +#221720 = CARTESIAN_POINT('',(122.886421,-151.004009,0.)); +#221721 = LINE('',#221722,#221723); +#221722 = CARTESIAN_POINT('',(122.886421,-151.004009,0.)); +#221723 = VECTOR('',#221724,1.); +#221724 = DIRECTION('',(0.,0.,-1.)); +#221725 = ORIENTED_EDGE('',*,*,#221726,.F.); +#221726 = EDGE_CURVE('',#221688,#221719,#221727,.T.); +#221727 = LINE('',#221728,#221729); +#221728 = CARTESIAN_POINT('',(122.901353,-151.040057,0.)); +#221729 = VECTOR('',#221730,1.); +#221730 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#221731 = PLANE('',#221732); +#221732 = AXIS2_PLACEMENT_3D('',#221733,#221734,#221735); +#221733 = CARTESIAN_POINT('',(122.901353,-151.040057,0.)); +#221734 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#221735 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#221736 = ADVANCED_FACE('',(#221737),#221762,.F.); +#221737 = FACE_BOUND('',#221738,.F.); +#221738 = EDGE_LOOP('',(#221739,#221740,#221748,#221756)); +#221739 = ORIENTED_EDGE('',*,*,#221718,.T.); +#221740 = ORIENTED_EDGE('',*,*,#221741,.T.); +#221741 = EDGE_CURVE('',#221711,#221742,#221744,.T.); +#221742 = VERTEX_POINT('',#221743); +#221743 = CARTESIAN_POINT('',(122.886421,-149.059857,-3.5E-02)); +#221744 = LINE('',#221745,#221746); +#221745 = CARTESIAN_POINT('',(122.886421,-151.004009,-3.5E-02)); +#221746 = VECTOR('',#221747,1.); +#221747 = DIRECTION('',(0.,1.,0.)); +#221748 = ORIENTED_EDGE('',*,*,#221749,.F.); +#221749 = EDGE_CURVE('',#221750,#221742,#221752,.T.); +#221750 = VERTEX_POINT('',#221751); +#221751 = CARTESIAN_POINT('',(122.886421,-149.059857,0.)); +#221752 = LINE('',#221753,#221754); +#221753 = CARTESIAN_POINT('',(122.886421,-149.059857,0.)); +#221754 = VECTOR('',#221755,1.); +#221755 = DIRECTION('',(0.,0.,-1.)); +#221756 = ORIENTED_EDGE('',*,*,#221757,.F.); +#221757 = EDGE_CURVE('',#221719,#221750,#221758,.T.); +#221758 = LINE('',#221759,#221760); +#221759 = CARTESIAN_POINT('',(122.886421,-151.004009,0.)); +#221760 = VECTOR('',#221761,1.); +#221761 = DIRECTION('',(0.,1.,0.)); +#221762 = PLANE('',#221763); +#221763 = AXIS2_PLACEMENT_3D('',#221764,#221765,#221766); +#221764 = CARTESIAN_POINT('',(122.886421,-151.004009,0.)); +#221765 = DIRECTION('',(1.,-0.,0.)); +#221766 = DIRECTION('',(0.,1.,0.)); +#221767 = ADVANCED_FACE('',(#221768),#221793,.F.); +#221768 = FACE_BOUND('',#221769,.F.); +#221769 = EDGE_LOOP('',(#221770,#221771,#221779,#221787)); +#221770 = ORIENTED_EDGE('',*,*,#221749,.T.); +#221771 = ORIENTED_EDGE('',*,*,#221772,.T.); +#221772 = EDGE_CURVE('',#221742,#221773,#221775,.T.); +#221773 = VERTEX_POINT('',#221774); +#221774 = CARTESIAN_POINT('',(122.901353,-149.023809,-3.5E-02)); +#221775 = LINE('',#221776,#221777); +#221776 = CARTESIAN_POINT('',(122.886421,-149.059857,-3.5E-02)); +#221777 = VECTOR('',#221778,1.); +#221778 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221779 = ORIENTED_EDGE('',*,*,#221780,.F.); +#221780 = EDGE_CURVE('',#221781,#221773,#221783,.T.); +#221781 = VERTEX_POINT('',#221782); +#221782 = CARTESIAN_POINT('',(122.901353,-149.023809,0.)); +#221783 = LINE('',#221784,#221785); +#221784 = CARTESIAN_POINT('',(122.901353,-149.023809,0.)); +#221785 = VECTOR('',#221786,1.); +#221786 = DIRECTION('',(0.,0.,-1.)); +#221787 = ORIENTED_EDGE('',*,*,#221788,.F.); +#221788 = EDGE_CURVE('',#221750,#221781,#221789,.T.); +#221789 = LINE('',#221790,#221791); +#221790 = CARTESIAN_POINT('',(122.886421,-149.059857,0.)); +#221791 = VECTOR('',#221792,1.); +#221792 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221793 = PLANE('',#221794); +#221794 = AXIS2_PLACEMENT_3D('',#221795,#221796,#221797); +#221795 = CARTESIAN_POINT('',(122.886421,-149.059857,0.)); +#221796 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#221797 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221798 = ADVANCED_FACE('',(#221799),#221824,.F.); +#221799 = FACE_BOUND('',#221800,.F.); +#221800 = EDGE_LOOP('',(#221801,#221802,#221810,#221818)); +#221801 = ORIENTED_EDGE('',*,*,#221780,.T.); +#221802 = ORIENTED_EDGE('',*,*,#221803,.T.); +#221803 = EDGE_CURVE('',#221773,#221804,#221806,.T.); +#221804 = VERTEX_POINT('',#221805); +#221805 = CARTESIAN_POINT('',(125.008309,-146.916852,-3.5E-02)); +#221806 = LINE('',#221807,#221808); +#221807 = CARTESIAN_POINT('',(122.901353,-149.023809,-3.5E-02)); +#221808 = VECTOR('',#221809,1.); +#221809 = DIRECTION('',(0.707106613384,0.707106948989,0.)); +#221810 = ORIENTED_EDGE('',*,*,#221811,.F.); +#221811 = EDGE_CURVE('',#221812,#221804,#221814,.T.); +#221812 = VERTEX_POINT('',#221813); +#221813 = CARTESIAN_POINT('',(125.008309,-146.916852,0.)); +#221814 = LINE('',#221815,#221816); +#221815 = CARTESIAN_POINT('',(125.008309,-146.916852,0.)); +#221816 = VECTOR('',#221817,1.); +#221817 = DIRECTION('',(0.,0.,-1.)); +#221818 = ORIENTED_EDGE('',*,*,#221819,.F.); +#221819 = EDGE_CURVE('',#221781,#221812,#221820,.T.); +#221820 = LINE('',#221821,#221822); +#221821 = CARTESIAN_POINT('',(122.901353,-149.023809,0.)); +#221822 = VECTOR('',#221823,1.); +#221823 = DIRECTION('',(0.707106613384,0.707106948989,0.)); +#221824 = PLANE('',#221825); +#221825 = AXIS2_PLACEMENT_3D('',#221826,#221827,#221828); +#221826 = CARTESIAN_POINT('',(122.901353,-149.023809,0.)); +#221827 = DIRECTION('',(0.707106948989,-0.707106613384,0.)); +#221828 = DIRECTION('',(0.707106613384,0.707106948989,0.)); +#221829 = ADVANCED_FACE('',(#221830),#221855,.F.); +#221830 = FACE_BOUND('',#221831,.F.); +#221831 = EDGE_LOOP('',(#221832,#221833,#221841,#221849)); +#221832 = ORIENTED_EDGE('',*,*,#221811,.T.); +#221833 = ORIENTED_EDGE('',*,*,#221834,.T.); +#221834 = EDGE_CURVE('',#221804,#221835,#221837,.T.); +#221835 = VERTEX_POINT('',#221836); +#221836 = CARTESIAN_POINT('',(125.044357,-146.901921,-3.5E-02)); +#221837 = LINE('',#221838,#221839); +#221838 = CARTESIAN_POINT('',(125.008309,-146.916852,-3.5E-02)); +#221839 = VECTOR('',#221840,1.); +#221840 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#221841 = ORIENTED_EDGE('',*,*,#221842,.F.); +#221842 = EDGE_CURVE('',#221843,#221835,#221845,.T.); +#221843 = VERTEX_POINT('',#221844); +#221844 = CARTESIAN_POINT('',(125.044357,-146.901921,0.)); +#221845 = LINE('',#221846,#221847); +#221846 = CARTESIAN_POINT('',(125.044357,-146.901921,0.)); +#221847 = VECTOR('',#221848,1.); +#221848 = DIRECTION('',(0.,0.,-1.)); +#221849 = ORIENTED_EDGE('',*,*,#221850,.F.); +#221850 = EDGE_CURVE('',#221812,#221843,#221851,.T.); +#221851 = LINE('',#221852,#221853); +#221852 = CARTESIAN_POINT('',(125.008309,-146.916852,0.)); +#221853 = VECTOR('',#221854,1.); +#221854 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#221855 = PLANE('',#221856); +#221856 = AXIS2_PLACEMENT_3D('',#221857,#221858,#221859); +#221857 = CARTESIAN_POINT('',(125.008309,-146.916852,0.)); +#221858 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#221859 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#221860 = ADVANCED_FACE('',(#221861),#221886,.F.); +#221861 = FACE_BOUND('',#221862,.F.); +#221862 = EDGE_LOOP('',(#221863,#221864,#221872,#221880)); +#221863 = ORIENTED_EDGE('',*,*,#221842,.T.); +#221864 = ORIENTED_EDGE('',*,*,#221865,.T.); +#221865 = EDGE_CURVE('',#221835,#221866,#221868,.T.); +#221866 = VERTEX_POINT('',#221867); +#221867 = CARTESIAN_POINT('',(136.438578,-146.9,-3.5E-02)); +#221868 = LINE('',#221869,#221870); +#221869 = CARTESIAN_POINT('',(125.044357,-146.901921,-3.5E-02)); +#221870 = VECTOR('',#221871,1.); +#221871 = DIRECTION('',(0.999999985788,1.685942349793E-04,0.)); +#221872 = ORIENTED_EDGE('',*,*,#221873,.F.); +#221873 = EDGE_CURVE('',#221874,#221866,#221876,.T.); +#221874 = VERTEX_POINT('',#221875); +#221875 = CARTESIAN_POINT('',(136.438578,-146.9,0.)); +#221876 = LINE('',#221877,#221878); +#221877 = CARTESIAN_POINT('',(136.438578,-146.9,0.)); +#221878 = VECTOR('',#221879,1.); +#221879 = DIRECTION('',(0.,0.,-1.)); +#221880 = ORIENTED_EDGE('',*,*,#221881,.F.); +#221881 = EDGE_CURVE('',#221843,#221874,#221882,.T.); +#221882 = LINE('',#221883,#221884); +#221883 = CARTESIAN_POINT('',(125.044357,-146.901921,0.)); +#221884 = VECTOR('',#221885,1.); +#221885 = DIRECTION('',(0.999999985788,1.685942349793E-04,0.)); +#221886 = PLANE('',#221887); +#221887 = AXIS2_PLACEMENT_3D('',#221888,#221889,#221890); +#221888 = CARTESIAN_POINT('',(125.044357,-146.901921,0.)); +#221889 = DIRECTION('',(1.685942349793E-04,-0.999999985788,0.)); +#221890 = DIRECTION('',(0.999999985788,1.685942349793E-04,0.)); +#221891 = ADVANCED_FACE('',(#221892),#221917,.F.); +#221892 = FACE_BOUND('',#221893,.F.); +#221893 = EDGE_LOOP('',(#221894,#221895,#221903,#221911)); +#221894 = ORIENTED_EDGE('',*,*,#221873,.T.); +#221895 = ORIENTED_EDGE('',*,*,#221896,.T.); +#221896 = EDGE_CURVE('',#221866,#221897,#221899,.T.); +#221897 = VERTEX_POINT('',#221898); +#221898 = CARTESIAN_POINT('',(147.74,-135.598578,-3.5E-02)); +#221899 = LINE('',#221900,#221901); +#221900 = CARTESIAN_POINT('',(136.438578,-146.9,-3.5E-02)); +#221901 = VECTOR('',#221902,1.); +#221902 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221903 = ORIENTED_EDGE('',*,*,#221904,.F.); +#221904 = EDGE_CURVE('',#221905,#221897,#221907,.T.); +#221905 = VERTEX_POINT('',#221906); +#221906 = CARTESIAN_POINT('',(147.74,-135.598578,0.)); +#221907 = LINE('',#221908,#221909); +#221908 = CARTESIAN_POINT('',(147.74,-135.598578,0.)); +#221909 = VECTOR('',#221910,1.); +#221910 = DIRECTION('',(0.,0.,-1.)); +#221911 = ORIENTED_EDGE('',*,*,#221912,.F.); +#221912 = EDGE_CURVE('',#221874,#221905,#221913,.T.); +#221913 = LINE('',#221914,#221915); +#221914 = CARTESIAN_POINT('',(136.438578,-146.9,0.)); +#221915 = VECTOR('',#221916,1.); +#221916 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221917 = PLANE('',#221918); +#221918 = AXIS2_PLACEMENT_3D('',#221919,#221920,#221921); +#221919 = CARTESIAN_POINT('',(136.438578,-146.9,0.)); +#221920 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#221921 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#221922 = ADVANCED_FACE('',(#221923),#221948,.F.); +#221923 = FACE_BOUND('',#221924,.F.); +#221924 = EDGE_LOOP('',(#221925,#221926,#221934,#221942)); +#221925 = ORIENTED_EDGE('',*,*,#221904,.T.); +#221926 = ORIENTED_EDGE('',*,*,#221927,.T.); +#221927 = EDGE_CURVE('',#221897,#221928,#221930,.T.); +#221928 = VERTEX_POINT('',#221929); +#221929 = CARTESIAN_POINT('',(147.741921,-135.130491,-3.5E-02)); +#221930 = LINE('',#221931,#221932); +#221931 = CARTESIAN_POINT('',(147.74,-135.598578,-3.5E-02)); +#221932 = VECTOR('',#221933,1.); +#221933 = DIRECTION('',(4.103903383667E-03,0.999991578953,0.)); +#221934 = ORIENTED_EDGE('',*,*,#221935,.F.); +#221935 = EDGE_CURVE('',#221936,#221928,#221938,.T.); +#221936 = VERTEX_POINT('',#221937); +#221937 = CARTESIAN_POINT('',(147.741921,-135.130491,0.)); +#221938 = LINE('',#221939,#221940); +#221939 = CARTESIAN_POINT('',(147.741921,-135.130491,0.)); +#221940 = VECTOR('',#221941,1.); +#221941 = DIRECTION('',(0.,0.,-1.)); +#221942 = ORIENTED_EDGE('',*,*,#221943,.F.); +#221943 = EDGE_CURVE('',#221905,#221936,#221944,.T.); +#221944 = LINE('',#221945,#221946); +#221945 = CARTESIAN_POINT('',(147.74,-135.598578,0.)); +#221946 = VECTOR('',#221947,1.); +#221947 = DIRECTION('',(4.103903383667E-03,0.999991578953,0.)); +#221948 = PLANE('',#221949); +#221949 = AXIS2_PLACEMENT_3D('',#221950,#221951,#221952); +#221950 = CARTESIAN_POINT('',(147.74,-135.598578,0.)); +#221951 = DIRECTION('',(0.999991578953,-4.103903383667E-03,0.)); +#221952 = DIRECTION('',(4.103903383667E-03,0.999991578953,0.)); +#221953 = ADVANCED_FACE('',(#221954),#221979,.F.); +#221954 = FACE_BOUND('',#221955,.F.); +#221955 = EDGE_LOOP('',(#221956,#221957,#221965,#221973)); +#221956 = ORIENTED_EDGE('',*,*,#221935,.T.); +#221957 = ORIENTED_EDGE('',*,*,#221958,.T.); +#221958 = EDGE_CURVE('',#221928,#221959,#221961,.T.); +#221959 = VERTEX_POINT('',#221960); +#221960 = CARTESIAN_POINT('',(147.756853,-135.094443,-3.5E-02)); +#221961 = LINE('',#221962,#221963); +#221962 = CARTESIAN_POINT('',(147.741921,-135.130491,-3.5E-02)); +#221963 = VECTOR('',#221964,1.); +#221964 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221965 = ORIENTED_EDGE('',*,*,#221966,.F.); +#221966 = EDGE_CURVE('',#221967,#221959,#221969,.T.); +#221967 = VERTEX_POINT('',#221968); +#221968 = CARTESIAN_POINT('',(147.756853,-135.094443,0.)); +#221969 = LINE('',#221970,#221971); +#221970 = CARTESIAN_POINT('',(147.756853,-135.094443,0.)); +#221971 = VECTOR('',#221972,1.); +#221972 = DIRECTION('',(0.,0.,-1.)); +#221973 = ORIENTED_EDGE('',*,*,#221974,.F.); +#221974 = EDGE_CURVE('',#221936,#221967,#221975,.T.); +#221975 = LINE('',#221976,#221977); +#221976 = CARTESIAN_POINT('',(147.741921,-135.130491,0.)); +#221977 = VECTOR('',#221978,1.); +#221978 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221979 = PLANE('',#221980); +#221980 = AXIS2_PLACEMENT_3D('',#221981,#221982,#221983); +#221981 = CARTESIAN_POINT('',(147.741921,-135.130491,0.)); +#221982 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#221983 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#221984 = ADVANCED_FACE('',(#221985),#222010,.F.); +#221985 = FACE_BOUND('',#221986,.F.); +#221986 = EDGE_LOOP('',(#221987,#221988,#221996,#222004)); +#221987 = ORIENTED_EDGE('',*,*,#221966,.T.); +#221988 = ORIENTED_EDGE('',*,*,#221989,.T.); +#221989 = EDGE_CURVE('',#221959,#221990,#221992,.T.); +#221990 = VERTEX_POINT('',#221991); +#221991 = CARTESIAN_POINT('',(148.04,-134.808578,-3.5E-02)); +#221992 = LINE('',#221993,#221994); +#221993 = CARTESIAN_POINT('',(147.756853,-135.094443,-3.5E-02)); +#221994 = VECTOR('',#221995,1.); +#221995 = DIRECTION('',(0.703721115443,0.710476313244,0.)); +#221996 = ORIENTED_EDGE('',*,*,#221997,.F.); +#221997 = EDGE_CURVE('',#221998,#221990,#222000,.T.); +#221998 = VERTEX_POINT('',#221999); +#221999 = CARTESIAN_POINT('',(148.04,-134.808578,0.)); +#222000 = LINE('',#222001,#222002); +#222001 = CARTESIAN_POINT('',(148.04,-134.808578,0.)); +#222002 = VECTOR('',#222003,1.); +#222003 = DIRECTION('',(0.,0.,-1.)); +#222004 = ORIENTED_EDGE('',*,*,#222005,.F.); +#222005 = EDGE_CURVE('',#221967,#221998,#222006,.T.); +#222006 = LINE('',#222007,#222008); +#222007 = CARTESIAN_POINT('',(147.756853,-135.094443,0.)); +#222008 = VECTOR('',#222009,1.); +#222009 = DIRECTION('',(0.703721115443,0.710476313244,0.)); +#222010 = PLANE('',#222011); +#222011 = AXIS2_PLACEMENT_3D('',#222012,#222013,#222014); +#222012 = CARTESIAN_POINT('',(147.756853,-135.094443,0.)); +#222013 = DIRECTION('',(0.710476313244,-0.703721115443,0.)); +#222014 = DIRECTION('',(0.703721115443,0.710476313244,0.)); +#222015 = ADVANCED_FACE('',(#222016),#222041,.F.); +#222016 = FACE_BOUND('',#222017,.F.); +#222017 = EDGE_LOOP('',(#222018,#222019,#222027,#222035)); +#222018 = ORIENTED_EDGE('',*,*,#221997,.T.); +#222019 = ORIENTED_EDGE('',*,*,#222020,.T.); +#222020 = EDGE_CURVE('',#221990,#222021,#222023,.T.); +#222021 = VERTEX_POINT('',#222022); +#222022 = CARTESIAN_POINT('',(148.04,-133.731422,-3.5E-02)); +#222023 = LINE('',#222024,#222025); +#222024 = CARTESIAN_POINT('',(148.04,-134.808578,-3.5E-02)); +#222025 = VECTOR('',#222026,1.); +#222026 = DIRECTION('',(0.,1.,0.)); +#222027 = ORIENTED_EDGE('',*,*,#222028,.F.); +#222028 = EDGE_CURVE('',#222029,#222021,#222031,.T.); +#222029 = VERTEX_POINT('',#222030); +#222030 = CARTESIAN_POINT('',(148.04,-133.731422,0.)); +#222031 = LINE('',#222032,#222033); +#222032 = CARTESIAN_POINT('',(148.04,-133.731422,0.)); +#222033 = VECTOR('',#222034,1.); +#222034 = DIRECTION('',(0.,0.,-1.)); +#222035 = ORIENTED_EDGE('',*,*,#222036,.F.); +#222036 = EDGE_CURVE('',#221998,#222029,#222037,.T.); +#222037 = LINE('',#222038,#222039); +#222038 = CARTESIAN_POINT('',(148.04,-134.808578,0.)); +#222039 = VECTOR('',#222040,1.); +#222040 = DIRECTION('',(0.,1.,0.)); +#222041 = PLANE('',#222042); +#222042 = AXIS2_PLACEMENT_3D('',#222043,#222044,#222045); +#222043 = CARTESIAN_POINT('',(148.04,-134.808578,0.)); +#222044 = DIRECTION('',(1.,-0.,0.)); +#222045 = DIRECTION('',(0.,1.,0.)); +#222046 = ADVANCED_FACE('',(#222047),#222072,.F.); +#222047 = FACE_BOUND('',#222048,.F.); +#222048 = EDGE_LOOP('',(#222049,#222050,#222058,#222066)); +#222049 = ORIENTED_EDGE('',*,*,#222028,.T.); +#222050 = ORIENTED_EDGE('',*,*,#222051,.T.); +#222051 = EDGE_CURVE('',#222021,#222052,#222054,.T.); +#222052 = VERTEX_POINT('',#222053); +#222053 = CARTESIAN_POINT('',(147.016853,-132.705557,-3.5E-02)); +#222054 = LINE('',#222055,#222056); +#222055 = CARTESIAN_POINT('',(148.04,-133.731422,-3.5E-02)); +#222056 = VECTOR('',#222057,1.); +#222057 = DIRECTION('',(-0.706168187736,0.708044130425,0.)); +#222058 = ORIENTED_EDGE('',*,*,#222059,.F.); +#222059 = EDGE_CURVE('',#222060,#222052,#222062,.T.); +#222060 = VERTEX_POINT('',#222061); +#222061 = CARTESIAN_POINT('',(147.016853,-132.705557,0.)); +#222062 = LINE('',#222063,#222064); +#222063 = CARTESIAN_POINT('',(147.016853,-132.705557,0.)); +#222064 = VECTOR('',#222065,1.); +#222065 = DIRECTION('',(0.,0.,-1.)); +#222066 = ORIENTED_EDGE('',*,*,#222067,.F.); +#222067 = EDGE_CURVE('',#222029,#222060,#222068,.T.); +#222068 = LINE('',#222069,#222070); +#222069 = CARTESIAN_POINT('',(148.04,-133.731422,0.)); +#222070 = VECTOR('',#222071,1.); +#222071 = DIRECTION('',(-0.706168187736,0.708044130425,0.)); +#222072 = PLANE('',#222073); +#222073 = AXIS2_PLACEMENT_3D('',#222074,#222075,#222076); +#222074 = CARTESIAN_POINT('',(148.04,-133.731422,0.)); +#222075 = DIRECTION('',(0.708044130425,0.706168187736,0.)); +#222076 = DIRECTION('',(-0.706168187736,0.708044130425,0.)); +#222077 = ADVANCED_FACE('',(#222078),#222103,.F.); +#222078 = FACE_BOUND('',#222079,.F.); +#222079 = EDGE_LOOP('',(#222080,#222081,#222089,#222097)); +#222080 = ORIENTED_EDGE('',*,*,#222059,.T.); +#222081 = ORIENTED_EDGE('',*,*,#222082,.T.); +#222082 = EDGE_CURVE('',#222052,#222083,#222085,.T.); +#222083 = VERTEX_POINT('',#222084); +#222084 = CARTESIAN_POINT('',(147.001921,-132.669509,-3.5E-02)); +#222085 = LINE('',#222086,#222087); +#222086 = CARTESIAN_POINT('',(147.016853,-132.705557,-3.5E-02)); +#222087 = VECTOR('',#222088,1.); +#222088 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#222089 = ORIENTED_EDGE('',*,*,#222090,.F.); +#222090 = EDGE_CURVE('',#222091,#222083,#222093,.T.); +#222091 = VERTEX_POINT('',#222092); +#222092 = CARTESIAN_POINT('',(147.001921,-132.669509,0.)); +#222093 = LINE('',#222094,#222095); +#222094 = CARTESIAN_POINT('',(147.001921,-132.669509,0.)); +#222095 = VECTOR('',#222096,1.); +#222096 = DIRECTION('',(0.,0.,-1.)); +#222097 = ORIENTED_EDGE('',*,*,#222098,.F.); +#222098 = EDGE_CURVE('',#222060,#222091,#222099,.T.); +#222099 = LINE('',#222100,#222101); +#222100 = CARTESIAN_POINT('',(147.016853,-132.705557,0.)); +#222101 = VECTOR('',#222102,1.); +#222102 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#222103 = PLANE('',#222104); +#222104 = AXIS2_PLACEMENT_3D('',#222105,#222106,#222107); +#222105 = CARTESIAN_POINT('',(147.016853,-132.705557,0.)); +#222106 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#222107 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#222108 = ADVANCED_FACE('',(#222109),#222134,.F.); +#222109 = FACE_BOUND('',#222110,.F.); +#222110 = EDGE_LOOP('',(#222111,#222112,#222120,#222128)); +#222111 = ORIENTED_EDGE('',*,*,#222090,.T.); +#222112 = ORIENTED_EDGE('',*,*,#222113,.T.); +#222113 = EDGE_CURVE('',#222083,#222114,#222116,.T.); +#222114 = VERTEX_POINT('',#222115); +#222115 = CARTESIAN_POINT('',(147.001921,-132.430491,-3.5E-02)); +#222116 = LINE('',#222117,#222118); +#222117 = CARTESIAN_POINT('',(147.001921,-132.669509,-3.5E-02)); +#222118 = VECTOR('',#222119,1.); +#222119 = DIRECTION('',(0.,1.,0.)); +#222120 = ORIENTED_EDGE('',*,*,#222121,.F.); +#222121 = EDGE_CURVE('',#222122,#222114,#222124,.T.); +#222122 = VERTEX_POINT('',#222123); +#222123 = CARTESIAN_POINT('',(147.001921,-132.430491,0.)); +#222124 = LINE('',#222125,#222126); +#222125 = CARTESIAN_POINT('',(147.001921,-132.430491,0.)); +#222126 = VECTOR('',#222127,1.); +#222127 = DIRECTION('',(0.,0.,-1.)); +#222128 = ORIENTED_EDGE('',*,*,#222129,.F.); +#222129 = EDGE_CURVE('',#222091,#222122,#222130,.T.); +#222130 = LINE('',#222131,#222132); +#222131 = CARTESIAN_POINT('',(147.001921,-132.669509,0.)); +#222132 = VECTOR('',#222133,1.); +#222133 = DIRECTION('',(0.,1.,0.)); +#222134 = PLANE('',#222135); +#222135 = AXIS2_PLACEMENT_3D('',#222136,#222137,#222138); +#222136 = CARTESIAN_POINT('',(147.001921,-132.669509,0.)); +#222137 = DIRECTION('',(1.,-0.,0.)); +#222138 = DIRECTION('',(0.,1.,0.)); +#222139 = ADVANCED_FACE('',(#222140),#222167,.T.); +#222140 = FACE_BOUND('',#222141,.F.); +#222141 = EDGE_LOOP('',(#222142,#222143,#222152,#222160)); +#222142 = ORIENTED_EDGE('',*,*,#222121,.T.); +#222143 = ORIENTED_EDGE('',*,*,#222144,.T.); +#222144 = EDGE_CURVE('',#222114,#222145,#222147,.T.); +#222145 = VERTEX_POINT('',#222146); +#222146 = CARTESIAN_POINT('',(147.198079,-132.430491,-3.5E-02)); +#222147 = CIRCLE('',#222148,0.100000456609); +#222148 = AXIS2_PLACEMENT_3D('',#222149,#222150,#222151); +#222149 = CARTESIAN_POINT('',(147.1,-132.45,-3.5E-02)); +#222150 = DIRECTION('',(0.,0.,-1.)); +#222151 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#222152 = ORIENTED_EDGE('',*,*,#222153,.F.); +#222153 = EDGE_CURVE('',#222154,#222145,#222156,.T.); +#222154 = VERTEX_POINT('',#222155); +#222155 = CARTESIAN_POINT('',(147.198079,-132.430491,0.)); +#222156 = LINE('',#222157,#222158); +#222157 = CARTESIAN_POINT('',(147.198079,-132.430491,0.)); +#222158 = VECTOR('',#222159,1.); +#222159 = DIRECTION('',(0.,0.,-1.)); +#222160 = ORIENTED_EDGE('',*,*,#222161,.F.); +#222161 = EDGE_CURVE('',#222122,#222154,#222162,.T.); +#222162 = CIRCLE('',#222163,0.100000456609); +#222163 = AXIS2_PLACEMENT_3D('',#222164,#222165,#222166); +#222164 = CARTESIAN_POINT('',(147.1,-132.45,0.)); +#222165 = DIRECTION('',(0.,0.,-1.)); +#222166 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#222167 = CYLINDRICAL_SURFACE('',#222168,0.100000456609); +#222168 = AXIS2_PLACEMENT_3D('',#222169,#222170,#222171); +#222169 = CARTESIAN_POINT('',(147.1,-132.45,0.)); +#222170 = DIRECTION('',(-0.,-0.,1.)); +#222171 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#222172 = ADVANCED_FACE('',(#222173),#222198,.F.); +#222173 = FACE_BOUND('',#222174,.F.); +#222174 = EDGE_LOOP('',(#222175,#222176,#222184,#222192)); +#222175 = ORIENTED_EDGE('',*,*,#222153,.T.); +#222176 = ORIENTED_EDGE('',*,*,#222177,.T.); +#222177 = EDGE_CURVE('',#222145,#222178,#222180,.T.); +#222178 = VERTEX_POINT('',#222179); +#222179 = CARTESIAN_POINT('',(147.2,-132.608578,-3.5E-02)); +#222180 = LINE('',#222181,#222182); +#222181 = CARTESIAN_POINT('',(147.198079,-132.430491,-3.5E-02)); +#222182 = VECTOR('',#222183,1.); +#222183 = DIRECTION('',(1.078623509524E-02,-0.999941826874,0.)); +#222184 = ORIENTED_EDGE('',*,*,#222185,.F.); +#222185 = EDGE_CURVE('',#222186,#222178,#222188,.T.); +#222186 = VERTEX_POINT('',#222187); +#222187 = CARTESIAN_POINT('',(147.2,-132.608578,0.)); +#222188 = LINE('',#222189,#222190); +#222189 = CARTESIAN_POINT('',(147.2,-132.608578,0.)); +#222190 = VECTOR('',#222191,1.); +#222191 = DIRECTION('',(0.,0.,-1.)); +#222192 = ORIENTED_EDGE('',*,*,#222193,.F.); +#222193 = EDGE_CURVE('',#222154,#222186,#222194,.T.); +#222194 = LINE('',#222195,#222196); +#222195 = CARTESIAN_POINT('',(147.198079,-132.430491,0.)); +#222196 = VECTOR('',#222197,1.); +#222197 = DIRECTION('',(1.078623509524E-02,-0.999941826874,0.)); +#222198 = PLANE('',#222199); +#222199 = AXIS2_PLACEMENT_3D('',#222200,#222201,#222202); +#222200 = CARTESIAN_POINT('',(147.198079,-132.430491,0.)); +#222201 = DIRECTION('',(-0.999941826874,-1.078623509524E-02,-0.)); +#222202 = DIRECTION('',(1.078623509524E-02,-0.999941826874,0.)); +#222203 = ADVANCED_FACE('',(#222204),#222229,.F.); +#222204 = FACE_BOUND('',#222205,.F.); +#222205 = EDGE_LOOP('',(#222206,#222207,#222215,#222223)); +#222206 = ORIENTED_EDGE('',*,*,#222185,.T.); +#222207 = ORIENTED_EDGE('',*,*,#222208,.T.); +#222208 = EDGE_CURVE('',#222178,#222209,#222211,.T.); +#222209 = VERTEX_POINT('',#222210); +#222210 = CARTESIAN_POINT('',(148.233147,-133.644443,-3.5E-02)); +#222211 = LINE('',#222212,#222213); +#222212 = CARTESIAN_POINT('',(147.2,-132.608578,-3.5E-02)); +#222213 = VECTOR('',#222214,1.); +#222214 = DIRECTION('',(0.706177266542,-0.708035075557,0.)); +#222215 = ORIENTED_EDGE('',*,*,#222216,.F.); +#222216 = EDGE_CURVE('',#222217,#222209,#222219,.T.); +#222217 = VERTEX_POINT('',#222218); +#222218 = CARTESIAN_POINT('',(148.233147,-133.644443,0.)); +#222219 = LINE('',#222220,#222221); +#222220 = CARTESIAN_POINT('',(148.233147,-133.644443,0.)); +#222221 = VECTOR('',#222222,1.); +#222222 = DIRECTION('',(0.,0.,-1.)); +#222223 = ORIENTED_EDGE('',*,*,#222224,.F.); +#222224 = EDGE_CURVE('',#222186,#222217,#222225,.T.); +#222225 = LINE('',#222226,#222227); +#222226 = CARTESIAN_POINT('',(147.2,-132.608578,0.)); +#222227 = VECTOR('',#222228,1.); +#222228 = DIRECTION('',(0.706177266542,-0.708035075557,0.)); +#222229 = PLANE('',#222230); +#222230 = AXIS2_PLACEMENT_3D('',#222231,#222232,#222233); +#222231 = CARTESIAN_POINT('',(147.2,-132.608578,0.)); +#222232 = DIRECTION('',(-0.708035075557,-0.706177266542,-0.)); +#222233 = DIRECTION('',(0.706177266542,-0.708035075557,0.)); +#222234 = ADVANCED_FACE('',(#222235),#222260,.F.); +#222235 = FACE_BOUND('',#222236,.F.); +#222236 = EDGE_LOOP('',(#222237,#222238,#222246,#222254)); +#222237 = ORIENTED_EDGE('',*,*,#222216,.T.); +#222238 = ORIENTED_EDGE('',*,*,#222239,.T.); +#222239 = EDGE_CURVE('',#222209,#222240,#222242,.T.); +#222240 = VERTEX_POINT('',#222241); +#222241 = CARTESIAN_POINT('',(148.248078,-133.680491,-3.5E-02)); +#222242 = LINE('',#222243,#222244); +#222243 = CARTESIAN_POINT('',(148.233147,-133.644443,-3.5E-02)); +#222244 = VECTOR('',#222245,1.); +#222245 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#222246 = ORIENTED_EDGE('',*,*,#222247,.F.); +#222247 = EDGE_CURVE('',#222248,#222240,#222250,.T.); +#222248 = VERTEX_POINT('',#222249); +#222249 = CARTESIAN_POINT('',(148.248078,-133.680491,0.)); +#222250 = LINE('',#222251,#222252); +#222251 = CARTESIAN_POINT('',(148.248078,-133.680491,0.)); +#222252 = VECTOR('',#222253,1.); +#222253 = DIRECTION('',(0.,0.,-1.)); +#222254 = ORIENTED_EDGE('',*,*,#222255,.F.); +#222255 = EDGE_CURVE('',#222217,#222248,#222256,.T.); +#222256 = LINE('',#222257,#222258); +#222257 = CARTESIAN_POINT('',(148.233147,-133.644443,0.)); +#222258 = VECTOR('',#222259,1.); +#222259 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#222260 = PLANE('',#222261); +#222261 = AXIS2_PLACEMENT_3D('',#222262,#222263,#222264); +#222262 = CARTESIAN_POINT('',(148.233147,-133.644443,0.)); +#222263 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#222264 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#222265 = ADVANCED_FACE('',(#222266),#222291,.F.); +#222266 = FACE_BOUND('',#222267,.F.); +#222267 = EDGE_LOOP('',(#222268,#222269,#222277,#222285)); +#222268 = ORIENTED_EDGE('',*,*,#222247,.T.); +#222269 = ORIENTED_EDGE('',*,*,#222270,.T.); +#222270 = EDGE_CURVE('',#222240,#222271,#222273,.T.); +#222271 = VERTEX_POINT('',#222272); +#222272 = CARTESIAN_POINT('',(148.248078,-133.719509,-3.5E-02)); +#222273 = LINE('',#222274,#222275); +#222274 = CARTESIAN_POINT('',(148.248078,-133.680491,-3.5E-02)); +#222275 = VECTOR('',#222276,1.); +#222276 = DIRECTION('',(0.,-1.,0.)); +#222277 = ORIENTED_EDGE('',*,*,#222278,.F.); +#222278 = EDGE_CURVE('',#222279,#222271,#222281,.T.); +#222279 = VERTEX_POINT('',#222280); +#222280 = CARTESIAN_POINT('',(148.248078,-133.719509,0.)); +#222281 = LINE('',#222282,#222283); +#222282 = CARTESIAN_POINT('',(148.248078,-133.719509,0.)); +#222283 = VECTOR('',#222284,1.); +#222284 = DIRECTION('',(0.,0.,-1.)); +#222285 = ORIENTED_EDGE('',*,*,#222286,.F.); +#222286 = EDGE_CURVE('',#222248,#222279,#222287,.T.); +#222287 = LINE('',#222288,#222289); +#222288 = CARTESIAN_POINT('',(148.248078,-133.680491,0.)); +#222289 = VECTOR('',#222290,1.); +#222290 = DIRECTION('',(0.,-1.,0.)); +#222291 = PLANE('',#222292); +#222292 = AXIS2_PLACEMENT_3D('',#222293,#222294,#222295); +#222293 = CARTESIAN_POINT('',(148.248078,-133.680491,0.)); +#222294 = DIRECTION('',(-1.,-0.,-0.)); +#222295 = DIRECTION('',(0.,-1.,0.)); +#222296 = ADVANCED_FACE('',(#222297),#222322,.F.); +#222297 = FACE_BOUND('',#222298,.F.); +#222298 = EDGE_LOOP('',(#222299,#222300,#222308,#222316)); +#222299 = ORIENTED_EDGE('',*,*,#222278,.T.); +#222300 = ORIENTED_EDGE('',*,*,#222301,.T.); +#222301 = EDGE_CURVE('',#222271,#222302,#222304,.T.); +#222302 = VERTEX_POINT('',#222303); +#222303 = CARTESIAN_POINT('',(148.24,-133.739011,-3.5E-02)); +#222304 = LINE('',#222305,#222306); +#222305 = CARTESIAN_POINT('',(148.248078,-133.719509,-3.5E-02)); +#222306 = VECTOR('',#222307,1.); +#222307 = DIRECTION('',(-0.382683719726,-0.923879413483,0.)); +#222308 = ORIENTED_EDGE('',*,*,#222309,.F.); +#222309 = EDGE_CURVE('',#222310,#222302,#222312,.T.); +#222310 = VERTEX_POINT('',#222311); +#222311 = CARTESIAN_POINT('',(148.24,-133.739011,0.)); +#222312 = LINE('',#222313,#222314); +#222313 = CARTESIAN_POINT('',(148.24,-133.739011,0.)); +#222314 = VECTOR('',#222315,1.); +#222315 = DIRECTION('',(0.,0.,-1.)); +#222316 = ORIENTED_EDGE('',*,*,#222317,.F.); +#222317 = EDGE_CURVE('',#222279,#222310,#222318,.T.); +#222318 = LINE('',#222319,#222320); +#222319 = CARTESIAN_POINT('',(148.248078,-133.719509,0.)); +#222320 = VECTOR('',#222321,1.); +#222321 = DIRECTION('',(-0.382683719726,-0.923879413483,0.)); +#222322 = PLANE('',#222323); +#222323 = AXIS2_PLACEMENT_3D('',#222324,#222325,#222326); +#222324 = CARTESIAN_POINT('',(148.248078,-133.719509,0.)); +#222325 = DIRECTION('',(-0.923879413483,0.382683719726,0.)); +#222326 = DIRECTION('',(-0.382683719726,-0.923879413483,0.)); +#222327 = ADVANCED_FACE('',(#222328),#222353,.F.); +#222328 = FACE_BOUND('',#222329,.F.); +#222329 = EDGE_LOOP('',(#222330,#222331,#222339,#222347)); +#222330 = ORIENTED_EDGE('',*,*,#222309,.T.); +#222331 = ORIENTED_EDGE('',*,*,#222332,.T.); +#222332 = EDGE_CURVE('',#222302,#222333,#222335,.T.); +#222333 = VERTEX_POINT('',#222334); +#222334 = CARTESIAN_POINT('',(148.24,-134.608578,-3.5E-02)); +#222335 = LINE('',#222336,#222337); +#222336 = CARTESIAN_POINT('',(148.24,-133.739011,-3.5E-02)); +#222337 = VECTOR('',#222338,1.); +#222338 = DIRECTION('',(0.,-1.,0.)); +#222339 = ORIENTED_EDGE('',*,*,#222340,.F.); +#222340 = EDGE_CURVE('',#222341,#222333,#222343,.T.); +#222341 = VERTEX_POINT('',#222342); +#222342 = CARTESIAN_POINT('',(148.24,-134.608578,0.)); +#222343 = LINE('',#222344,#222345); +#222344 = CARTESIAN_POINT('',(148.24,-134.608578,0.)); +#222345 = VECTOR('',#222346,1.); +#222346 = DIRECTION('',(0.,0.,-1.)); +#222347 = ORIENTED_EDGE('',*,*,#222348,.F.); +#222348 = EDGE_CURVE('',#222310,#222341,#222349,.T.); +#222349 = LINE('',#222350,#222351); +#222350 = CARTESIAN_POINT('',(148.24,-133.739011,0.)); +#222351 = VECTOR('',#222352,1.); +#222352 = DIRECTION('',(0.,-1.,0.)); +#222353 = PLANE('',#222354); +#222354 = AXIS2_PLACEMENT_3D('',#222355,#222356,#222357); +#222355 = CARTESIAN_POINT('',(148.24,-133.739011,0.)); +#222356 = DIRECTION('',(-1.,-0.,-0.)); +#222357 = DIRECTION('',(0.,-1.,0.)); +#222358 = ADVANCED_FACE('',(#222359),#222384,.F.); +#222359 = FACE_BOUND('',#222360,.F.); +#222360 = EDGE_LOOP('',(#222361,#222362,#222370,#222378)); +#222361 = ORIENTED_EDGE('',*,*,#222340,.T.); +#222362 = ORIENTED_EDGE('',*,*,#222363,.T.); +#222363 = EDGE_CURVE('',#222333,#222364,#222366,.T.); +#222364 = VERTEX_POINT('',#222365); +#222365 = CARTESIAN_POINT('',(148.484442,-134.366853,-3.5E-02)); +#222366 = LINE('',#222367,#222368); +#222367 = CARTESIAN_POINT('',(148.24,-134.608578,-3.5E-02)); +#222368 = VECTOR('',#222369,1.); +#222369 = DIRECTION('',(0.711047424628,0.70314405347,0.)); +#222370 = ORIENTED_EDGE('',*,*,#222371,.F.); +#222371 = EDGE_CURVE('',#222372,#222364,#222374,.T.); +#222372 = VERTEX_POINT('',#222373); +#222373 = CARTESIAN_POINT('',(148.484442,-134.366853,0.)); +#222374 = LINE('',#222375,#222376); +#222375 = CARTESIAN_POINT('',(148.484442,-134.366853,0.)); +#222376 = VECTOR('',#222377,1.); +#222377 = DIRECTION('',(0.,0.,-1.)); +#222378 = ORIENTED_EDGE('',*,*,#222379,.F.); +#222379 = EDGE_CURVE('',#222341,#222372,#222380,.T.); +#222380 = LINE('',#222381,#222382); +#222381 = CARTESIAN_POINT('',(148.24,-134.608578,0.)); +#222382 = VECTOR('',#222383,1.); +#222383 = DIRECTION('',(0.711047424628,0.70314405347,0.)); +#222384 = PLANE('',#222385); +#222385 = AXIS2_PLACEMENT_3D('',#222386,#222387,#222388); +#222386 = CARTESIAN_POINT('',(148.24,-134.608578,0.)); +#222387 = DIRECTION('',(0.70314405347,-0.711047424628,0.)); +#222388 = DIRECTION('',(0.711047424628,0.70314405347,0.)); +#222389 = ADVANCED_FACE('',(#222390),#222415,.F.); +#222390 = FACE_BOUND('',#222391,.F.); +#222391 = EDGE_LOOP('',(#222392,#222393,#222401,#222409)); +#222392 = ORIENTED_EDGE('',*,*,#222371,.T.); +#222393 = ORIENTED_EDGE('',*,*,#222394,.T.); +#222394 = EDGE_CURVE('',#222364,#222395,#222397,.T.); +#222395 = VERTEX_POINT('',#222396); +#222396 = CARTESIAN_POINT('',(148.520491,-134.351921,-3.5E-02)); +#222397 = LINE('',#222398,#222399); +#222398 = CARTESIAN_POINT('',(148.484442,-134.366853,-3.5E-02)); +#222399 = VECTOR('',#222400,1.); +#222400 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#222401 = ORIENTED_EDGE('',*,*,#222402,.F.); +#222402 = EDGE_CURVE('',#222403,#222395,#222405,.T.); +#222403 = VERTEX_POINT('',#222404); +#222404 = CARTESIAN_POINT('',(148.520491,-134.351921,0.)); +#222405 = LINE('',#222406,#222407); +#222406 = CARTESIAN_POINT('',(148.520491,-134.351921,0.)); +#222407 = VECTOR('',#222408,1.); +#222408 = DIRECTION('',(0.,0.,-1.)); +#222409 = ORIENTED_EDGE('',*,*,#222410,.F.); +#222410 = EDGE_CURVE('',#222372,#222403,#222411,.T.); +#222411 = LINE('',#222412,#222413); +#222412 = CARTESIAN_POINT('',(148.484442,-134.366853,0.)); +#222413 = VECTOR('',#222414,1.); +#222414 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#222415 = PLANE('',#222416); +#222416 = AXIS2_PLACEMENT_3D('',#222417,#222418,#222419); +#222417 = CARTESIAN_POINT('',(148.484442,-134.366853,0.)); +#222418 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#222419 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#222420 = ADVANCED_FACE('',(#222421),#222446,.F.); +#222421 = FACE_BOUND('',#222422,.F.); +#222422 = EDGE_LOOP('',(#222423,#222424,#222432,#222440)); +#222423 = ORIENTED_EDGE('',*,*,#222402,.T.); +#222424 = ORIENTED_EDGE('',*,*,#222425,.T.); +#222425 = EDGE_CURVE('',#222395,#222426,#222428,.T.); +#222426 = VERTEX_POINT('',#222427); +#222427 = CARTESIAN_POINT('',(149.908578,-134.35,-3.5E-02)); +#222428 = LINE('',#222429,#222430); +#222429 = CARTESIAN_POINT('',(148.520491,-134.351921,-3.5E-02)); +#222430 = VECTOR('',#222431,1.); +#222431 = DIRECTION('',(0.999999042385,1.383917694231E-03,0.)); +#222432 = ORIENTED_EDGE('',*,*,#222433,.F.); +#222433 = EDGE_CURVE('',#222434,#222426,#222436,.T.); +#222434 = VERTEX_POINT('',#222435); +#222435 = CARTESIAN_POINT('',(149.908578,-134.35,0.)); +#222436 = LINE('',#222437,#222438); +#222437 = CARTESIAN_POINT('',(149.908578,-134.35,0.)); +#222438 = VECTOR('',#222439,1.); +#222439 = DIRECTION('',(0.,0.,-1.)); +#222440 = ORIENTED_EDGE('',*,*,#222441,.F.); +#222441 = EDGE_CURVE('',#222403,#222434,#222442,.T.); +#222442 = LINE('',#222443,#222444); +#222443 = CARTESIAN_POINT('',(148.520491,-134.351921,0.)); +#222444 = VECTOR('',#222445,1.); +#222445 = DIRECTION('',(0.999999042385,1.383917694231E-03,0.)); +#222446 = PLANE('',#222447); +#222447 = AXIS2_PLACEMENT_3D('',#222448,#222449,#222450); +#222448 = CARTESIAN_POINT('',(148.520491,-134.351921,0.)); +#222449 = DIRECTION('',(1.383917694231E-03,-0.999999042385,0.)); +#222450 = DIRECTION('',(0.999999042385,1.383917694231E-03,0.)); +#222451 = ADVANCED_FACE('',(#222452),#222477,.F.); +#222452 = FACE_BOUND('',#222453,.F.); +#222453 = EDGE_LOOP('',(#222454,#222455,#222463,#222471)); +#222454 = ORIENTED_EDGE('',*,*,#222433,.T.); +#222455 = ORIENTED_EDGE('',*,*,#222456,.T.); +#222456 = EDGE_CURVE('',#222426,#222457,#222459,.T.); +#222457 = VERTEX_POINT('',#222458); +#222458 = CARTESIAN_POINT('',(150.5,-133.758578,-3.5E-02)); +#222459 = LINE('',#222460,#222461); +#222460 = CARTESIAN_POINT('',(149.908578,-134.35,-3.5E-02)); +#222461 = VECTOR('',#222462,1.); +#222462 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#222463 = ORIENTED_EDGE('',*,*,#222464,.F.); +#222464 = EDGE_CURVE('',#222465,#222457,#222467,.T.); +#222465 = VERTEX_POINT('',#222466); +#222466 = CARTESIAN_POINT('',(150.5,-133.758578,0.)); +#222467 = LINE('',#222468,#222469); +#222468 = CARTESIAN_POINT('',(150.5,-133.758578,0.)); +#222469 = VECTOR('',#222470,1.); +#222470 = DIRECTION('',(0.,0.,-1.)); +#222471 = ORIENTED_EDGE('',*,*,#222472,.F.); +#222472 = EDGE_CURVE('',#222434,#222465,#222473,.T.); +#222473 = LINE('',#222474,#222475); +#222474 = CARTESIAN_POINT('',(149.908578,-134.35,0.)); +#222475 = VECTOR('',#222476,1.); +#222476 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#222477 = PLANE('',#222478); +#222478 = AXIS2_PLACEMENT_3D('',#222479,#222480,#222481); +#222479 = CARTESIAN_POINT('',(149.908578,-134.35,0.)); +#222480 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#222481 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#222482 = ADVANCED_FACE('',(#222483),#222508,.F.); +#222483 = FACE_BOUND('',#222484,.F.); +#222484 = EDGE_LOOP('',(#222485,#222486,#222494,#222502)); +#222485 = ORIENTED_EDGE('',*,*,#222464,.T.); +#222486 = ORIENTED_EDGE('',*,*,#222487,.T.); +#222487 = EDGE_CURVE('',#222457,#222488,#222490,.T.); +#222488 = VERTEX_POINT('',#222489); +#222489 = CARTESIAN_POINT('',(150.501921,-132.980491,-3.5E-02)); +#222490 = LINE('',#222491,#222492); +#222491 = CARTESIAN_POINT('',(150.5,-133.758578,-3.5E-02)); +#222492 = VECTOR('',#222493,1.); +#222493 = DIRECTION('',(2.468868064183E-03,0.999996952341,0.)); +#222494 = ORIENTED_EDGE('',*,*,#222495,.F.); +#222495 = EDGE_CURVE('',#222496,#222488,#222498,.T.); +#222496 = VERTEX_POINT('',#222497); +#222497 = CARTESIAN_POINT('',(150.501921,-132.980491,0.)); +#222498 = LINE('',#222499,#222500); +#222499 = CARTESIAN_POINT('',(150.501921,-132.980491,0.)); +#222500 = VECTOR('',#222501,1.); +#222501 = DIRECTION('',(0.,0.,-1.)); +#222502 = ORIENTED_EDGE('',*,*,#222503,.F.); +#222503 = EDGE_CURVE('',#222465,#222496,#222504,.T.); +#222504 = LINE('',#222505,#222506); +#222505 = CARTESIAN_POINT('',(150.5,-133.758578,0.)); +#222506 = VECTOR('',#222507,1.); +#222507 = DIRECTION('',(2.468868064183E-03,0.999996952341,0.)); +#222508 = PLANE('',#222509); +#222509 = AXIS2_PLACEMENT_3D('',#222510,#222511,#222512); +#222510 = CARTESIAN_POINT('',(150.5,-133.758578,0.)); +#222511 = DIRECTION('',(0.999996952341,-2.468868064183E-03,0.)); +#222512 = DIRECTION('',(2.468868064183E-03,0.999996952341,0.)); +#222513 = ADVANCED_FACE('',(#222514),#222539,.F.); +#222514 = FACE_BOUND('',#222515,.F.); +#222515 = EDGE_LOOP('',(#222516,#222517,#222525,#222533)); +#222516 = ORIENTED_EDGE('',*,*,#222495,.T.); +#222517 = ORIENTED_EDGE('',*,*,#222518,.T.); +#222518 = EDGE_CURVE('',#222488,#222519,#222521,.T.); +#222519 = VERTEX_POINT('',#222520); +#222520 = CARTESIAN_POINT('',(150.516853,-132.944443,-3.5E-02)); +#222521 = LINE('',#222522,#222523); +#222522 = CARTESIAN_POINT('',(150.501921,-132.980491,-3.5E-02)); +#222523 = VECTOR('',#222524,1.); +#222524 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#222525 = ORIENTED_EDGE('',*,*,#222526,.F.); +#222526 = EDGE_CURVE('',#222527,#222519,#222529,.T.); +#222527 = VERTEX_POINT('',#222528); +#222528 = CARTESIAN_POINT('',(150.516853,-132.944443,0.)); +#222529 = LINE('',#222530,#222531); +#222530 = CARTESIAN_POINT('',(150.516853,-132.944443,0.)); +#222531 = VECTOR('',#222532,1.); +#222532 = DIRECTION('',(0.,0.,-1.)); +#222533 = ORIENTED_EDGE('',*,*,#222534,.F.); +#222534 = EDGE_CURVE('',#222496,#222527,#222535,.T.); +#222535 = LINE('',#222536,#222537); +#222536 = CARTESIAN_POINT('',(150.501921,-132.980491,0.)); +#222537 = VECTOR('',#222538,1.); +#222538 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#222539 = PLANE('',#222540); +#222540 = AXIS2_PLACEMENT_3D('',#222541,#222542,#222543); +#222541 = CARTESIAN_POINT('',(150.501921,-132.980491,0.)); +#222542 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#222543 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#222544 = ADVANCED_FACE('',(#222545),#222570,.F.); +#222545 = FACE_BOUND('',#222546,.F.); +#222546 = EDGE_LOOP('',(#222547,#222548,#222556,#222564)); +#222547 = ORIENTED_EDGE('',*,*,#222526,.T.); +#222548 = ORIENTED_EDGE('',*,*,#222549,.T.); +#222549 = EDGE_CURVE('',#222519,#222550,#222552,.T.); +#222550 = VERTEX_POINT('',#222551); +#222551 = CARTESIAN_POINT('',(154.3,-129.158578,-3.5E-02)); +#222552 = LINE('',#222553,#222554); +#222553 = CARTESIAN_POINT('',(150.516853,-132.944443,-3.5E-02)); +#222554 = VECTOR('',#222555,1.); +#222555 = DIRECTION('',(0.706852816576,0.707360654616,0.)); +#222556 = ORIENTED_EDGE('',*,*,#222557,.F.); +#222557 = EDGE_CURVE('',#222558,#222550,#222560,.T.); +#222558 = VERTEX_POINT('',#222559); +#222559 = CARTESIAN_POINT('',(154.3,-129.158578,0.)); +#222560 = LINE('',#222561,#222562); +#222561 = CARTESIAN_POINT('',(154.3,-129.158578,0.)); +#222562 = VECTOR('',#222563,1.); +#222563 = DIRECTION('',(0.,0.,-1.)); +#222564 = ORIENTED_EDGE('',*,*,#222565,.F.); +#222565 = EDGE_CURVE('',#222527,#222558,#222566,.T.); +#222566 = LINE('',#222567,#222568); +#222567 = CARTESIAN_POINT('',(150.516853,-132.944443,0.)); +#222568 = VECTOR('',#222569,1.); +#222569 = DIRECTION('',(0.706852816576,0.707360654616,0.)); +#222570 = PLANE('',#222571); +#222571 = AXIS2_PLACEMENT_3D('',#222572,#222573,#222574); +#222572 = CARTESIAN_POINT('',(150.516853,-132.944443,0.)); +#222573 = DIRECTION('',(0.707360654616,-0.706852816576,0.)); +#222574 = DIRECTION('',(0.706852816576,0.707360654616,0.)); +#222575 = ADVANCED_FACE('',(#222576),#222601,.F.); +#222576 = FACE_BOUND('',#222577,.F.); +#222577 = EDGE_LOOP('',(#222578,#222579,#222587,#222595)); +#222578 = ORIENTED_EDGE('',*,*,#222557,.T.); +#222579 = ORIENTED_EDGE('',*,*,#222580,.T.); +#222580 = EDGE_CURVE('',#222550,#222581,#222583,.T.); +#222581 = VERTEX_POINT('',#222582); +#222582 = CARTESIAN_POINT('',(154.3,-85.28113,-3.5E-02)); +#222583 = LINE('',#222584,#222585); +#222584 = CARTESIAN_POINT('',(154.3,-129.158578,-3.5E-02)); +#222585 = VECTOR('',#222586,1.); +#222586 = DIRECTION('',(0.,1.,0.)); +#222587 = ORIENTED_EDGE('',*,*,#222588,.F.); +#222588 = EDGE_CURVE('',#222589,#222581,#222591,.T.); +#222589 = VERTEX_POINT('',#222590); +#222590 = CARTESIAN_POINT('',(154.3,-85.28113,0.)); +#222591 = LINE('',#222592,#222593); +#222592 = CARTESIAN_POINT('',(154.3,-85.28113,0.)); +#222593 = VECTOR('',#222594,1.); +#222594 = DIRECTION('',(0.,0.,-1.)); +#222595 = ORIENTED_EDGE('',*,*,#222596,.F.); +#222596 = EDGE_CURVE('',#222558,#222589,#222597,.T.); +#222597 = LINE('',#222598,#222599); +#222598 = CARTESIAN_POINT('',(154.3,-129.158578,0.)); +#222599 = VECTOR('',#222600,1.); +#222600 = DIRECTION('',(0.,1.,0.)); +#222601 = PLANE('',#222602); +#222602 = AXIS2_PLACEMENT_3D('',#222603,#222604,#222605); +#222603 = CARTESIAN_POINT('',(154.3,-129.158578,0.)); +#222604 = DIRECTION('',(1.,-0.,0.)); +#222605 = DIRECTION('',(0.,1.,0.)); +#222606 = ADVANCED_FACE('',(#222607),#222632,.F.); +#222607 = FACE_BOUND('',#222608,.F.); +#222608 = EDGE_LOOP('',(#222609,#222610,#222618,#222626)); +#222609 = ORIENTED_EDGE('',*,*,#222588,.T.); +#222610 = ORIENTED_EDGE('',*,*,#222611,.T.); +#222611 = EDGE_CURVE('',#222581,#222612,#222614,.T.); +#222612 = VERTEX_POINT('',#222613); +#222613 = CARTESIAN_POINT('',(154.285195,-85.277164,-3.5E-02)); +#222614 = LINE('',#222615,#222616); +#222615 = CARTESIAN_POINT('',(154.3,-85.28113,-3.5E-02)); +#222616 = VECTOR('',#222617,1.); +#222617 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#222618 = ORIENTED_EDGE('',*,*,#222619,.F.); +#222619 = EDGE_CURVE('',#222620,#222612,#222622,.T.); +#222620 = VERTEX_POINT('',#222621); +#222621 = CARTESIAN_POINT('',(154.285195,-85.277164,0.)); +#222622 = LINE('',#222623,#222624); +#222623 = CARTESIAN_POINT('',(154.285195,-85.277164,0.)); +#222624 = VECTOR('',#222625,1.); +#222625 = DIRECTION('',(0.,0.,-1.)); +#222626 = ORIENTED_EDGE('',*,*,#222627,.F.); +#222627 = EDGE_CURVE('',#222589,#222620,#222628,.T.); +#222628 = LINE('',#222629,#222630); +#222629 = CARTESIAN_POINT('',(154.3,-85.28113,0.)); +#222630 = VECTOR('',#222631,1.); +#222631 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#222632 = PLANE('',#222633); +#222633 = AXIS2_PLACEMENT_3D('',#222634,#222635,#222636); +#222634 = CARTESIAN_POINT('',(154.3,-85.28113,0.)); +#222635 = DIRECTION('',(0.258758913864,0.9659419364,0.)); +#222636 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#222637 = ADVANCED_FACE('',(#222638),#222665,.T.); +#222638 = FACE_BOUND('',#222639,.F.); +#222639 = EDGE_LOOP('',(#222640,#222641,#222650,#222658)); +#222640 = ORIENTED_EDGE('',*,*,#222619,.T.); +#222641 = ORIENTED_EDGE('',*,*,#222642,.T.); +#222642 = EDGE_CURVE('',#222612,#222643,#222645,.T.); +#222643 = VERTEX_POINT('',#222644); +#222644 = CARTESIAN_POINT('',(154.514805,-85.277164,-3.5E-02)); +#222645 = CIRCLE('',#222646,0.299999472923); +#222646 = AXIS2_PLACEMENT_3D('',#222647,#222648,#222649); +#222647 = CARTESIAN_POINT('',(154.4,-85.00000069844,-3.5E-02)); +#222648 = DIRECTION('',(0.,0.,-1.)); +#222649 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#222650 = ORIENTED_EDGE('',*,*,#222651,.F.); +#222651 = EDGE_CURVE('',#222652,#222643,#222654,.T.); +#222652 = VERTEX_POINT('',#222653); +#222653 = CARTESIAN_POINT('',(154.514805,-85.277164,0.)); +#222654 = LINE('',#222655,#222656); +#222655 = CARTESIAN_POINT('',(154.514805,-85.277164,0.)); +#222656 = VECTOR('',#222657,1.); +#222657 = DIRECTION('',(0.,0.,-1.)); +#222658 = ORIENTED_EDGE('',*,*,#222659,.F.); +#222659 = EDGE_CURVE('',#222620,#222652,#222660,.T.); +#222660 = CIRCLE('',#222661,0.299999472923); +#222661 = AXIS2_PLACEMENT_3D('',#222662,#222663,#222664); +#222662 = CARTESIAN_POINT('',(154.4,-85.00000069844,0.)); +#222663 = DIRECTION('',(0.,0.,-1.)); +#222664 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#222665 = CYLINDRICAL_SURFACE('',#222666,0.299999472923); +#222666 = AXIS2_PLACEMENT_3D('',#222667,#222668,#222669); +#222667 = CARTESIAN_POINT('',(154.4,-85.00000069844,0.)); +#222668 = DIRECTION('',(-0.,-0.,1.)); +#222669 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#222670 = ADVANCED_FACE('',(#222671),#222687,.F.); +#222671 = FACE_BOUND('',#222672,.F.); +#222672 = EDGE_LOOP('',(#222673,#222674,#222680,#222681)); +#222673 = ORIENTED_EDGE('',*,*,#222651,.T.); +#222674 = ORIENTED_EDGE('',*,*,#222675,.T.); +#222675 = EDGE_CURVE('',#222643,#220957,#222676,.T.); +#222676 = LINE('',#222677,#222678); +#222677 = CARTESIAN_POINT('',(154.514805,-85.277164,-3.5E-02)); +#222678 = VECTOR('',#222679,1.); +#222679 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#222680 = ORIENTED_EDGE('',*,*,#220954,.F.); +#222681 = ORIENTED_EDGE('',*,*,#222682,.F.); +#222682 = EDGE_CURVE('',#222652,#220955,#222683,.T.); +#222683 = LINE('',#222684,#222685); +#222684 = CARTESIAN_POINT('',(154.514805,-85.277164,0.)); +#222685 = VECTOR('',#222686,1.); +#222686 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#222687 = PLANE('',#222688); +#222688 = AXIS2_PLACEMENT_3D('',#222689,#222690,#222691); +#222689 = CARTESIAN_POINT('',(154.514805,-85.277164,0.)); +#222690 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#222691 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#222692 = ADVANCED_FACE('',(#222693),#222720,.F.); +#222693 = FACE_BOUND('',#222694,.F.); +#222694 = EDGE_LOOP('',(#222695,#222705,#222712,#222713)); +#222695 = ORIENTED_EDGE('',*,*,#222696,.T.); +#222696 = EDGE_CURVE('',#222697,#222699,#222701,.T.); +#222697 = VERTEX_POINT('',#222698); +#222698 = CARTESIAN_POINT('',(125.444434,-152.6,0.)); +#222699 = VERTEX_POINT('',#222700); +#222700 = CARTESIAN_POINT('',(125.444434,-152.6,-3.5E-02)); +#222701 = LINE('',#222702,#222703); +#222702 = CARTESIAN_POINT('',(125.444434,-152.6,0.)); +#222703 = VECTOR('',#222704,1.); +#222704 = DIRECTION('',(0.,0.,-1.)); +#222705 = ORIENTED_EDGE('',*,*,#222706,.T.); +#222706 = EDGE_CURVE('',#222699,#222699,#222707,.T.); +#222707 = CIRCLE('',#222708,0.137255); +#222708 = AXIS2_PLACEMENT_3D('',#222709,#222710,#222711); +#222709 = CARTESIAN_POINT('',(125.307179,-152.6,-3.5E-02)); +#222710 = DIRECTION('',(0.,0.,1.)); +#222711 = DIRECTION('',(1.,0.,-0.)); +#222712 = ORIENTED_EDGE('',*,*,#222696,.F.); +#222713 = ORIENTED_EDGE('',*,*,#222714,.F.); +#222714 = EDGE_CURVE('',#222697,#222697,#222715,.T.); +#222715 = CIRCLE('',#222716,0.137255); +#222716 = AXIS2_PLACEMENT_3D('',#222717,#222718,#222719); +#222717 = CARTESIAN_POINT('',(125.307179,-152.6,0.)); +#222718 = DIRECTION('',(0.,0.,1.)); +#222719 = DIRECTION('',(1.,0.,-0.)); +#222720 = CYLINDRICAL_SURFACE('',#222721,0.137255); +#222721 = AXIS2_PLACEMENT_3D('',#222722,#222723,#222724); +#222722 = CARTESIAN_POINT('',(125.307179,-152.6,0.)); +#222723 = DIRECTION('',(0.,0.,1.)); +#222724 = DIRECTION('',(1.,0.,-0.)); +#222725 = ADVANCED_FACE('',(#222726),#222753,.F.); +#222726 = FACE_BOUND('',#222727,.F.); +#222727 = EDGE_LOOP('',(#222728,#222738,#222745,#222746)); +#222728 = ORIENTED_EDGE('',*,*,#222729,.T.); +#222729 = EDGE_CURVE('',#222730,#222732,#222734,.T.); +#222730 = VERTEX_POINT('',#222731); +#222731 = CARTESIAN_POINT('',(154.537255,-85.,0.)); +#222732 = VERTEX_POINT('',#222733); +#222733 = CARTESIAN_POINT('',(154.537255,-85.,-3.5E-02)); +#222734 = LINE('',#222735,#222736); +#222735 = CARTESIAN_POINT('',(154.537255,-85.,0.)); +#222736 = VECTOR('',#222737,1.); +#222737 = DIRECTION('',(0.,0.,-1.)); +#222738 = ORIENTED_EDGE('',*,*,#222739,.T.); +#222739 = EDGE_CURVE('',#222732,#222732,#222740,.T.); +#222740 = CIRCLE('',#222741,0.137255); +#222741 = AXIS2_PLACEMENT_3D('',#222742,#222743,#222744); +#222742 = CARTESIAN_POINT('',(154.4,-85.,-3.5E-02)); +#222743 = DIRECTION('',(0.,0.,1.)); +#222744 = DIRECTION('',(1.,0.,-0.)); +#222745 = ORIENTED_EDGE('',*,*,#222729,.F.); +#222746 = ORIENTED_EDGE('',*,*,#222747,.F.); +#222747 = EDGE_CURVE('',#222730,#222730,#222748,.T.); +#222748 = CIRCLE('',#222749,0.137255); +#222749 = AXIS2_PLACEMENT_3D('',#222750,#222751,#222752); +#222750 = CARTESIAN_POINT('',(154.4,-85.,0.)); +#222751 = DIRECTION('',(0.,0.,1.)); +#222752 = DIRECTION('',(1.,0.,-0.)); +#222753 = CYLINDRICAL_SURFACE('',#222754,0.137255); +#222754 = AXIS2_PLACEMENT_3D('',#222755,#222756,#222757); +#222755 = CARTESIAN_POINT('',(154.4,-85.,0.)); +#222756 = DIRECTION('',(0.,0.,1.)); +#222757 = DIRECTION('',(1.,0.,-0.)); +#222758 = ADVANCED_FACE('',(#222759,#222817,#222820),#222823,.F.); +#222759 = FACE_BOUND('',#222760,.F.); +#222760 = EDGE_LOOP('',(#222761,#222762,#222763,#222764,#222765,#222766, + #222767,#222768,#222769,#222770,#222771,#222772,#222773,#222774, + #222775,#222776,#222777,#222778,#222779,#222780,#222781,#222782, + #222783,#222784,#222785,#222786,#222787,#222788,#222789,#222790, + #222791,#222792,#222793,#222794,#222795,#222796,#222797,#222798, + #222799,#222800,#222801,#222802,#222803,#222804,#222805,#222806, + #222807,#222808,#222809,#222810,#222811,#222812,#222813,#222814, + #222815,#222816)); +#222761 = ORIENTED_EDGE('',*,*,#220980,.T.); +#222762 = ORIENTED_EDGE('',*,*,#221011,.T.); +#222763 = ORIENTED_EDGE('',*,*,#221042,.T.); +#222764 = ORIENTED_EDGE('',*,*,#221073,.T.); +#222765 = ORIENTED_EDGE('',*,*,#221104,.T.); +#222766 = ORIENTED_EDGE('',*,*,#221135,.T.); +#222767 = ORIENTED_EDGE('',*,*,#221166,.T.); +#222768 = ORIENTED_EDGE('',*,*,#221197,.T.); +#222769 = ORIENTED_EDGE('',*,*,#221228,.T.); +#222770 = ORIENTED_EDGE('',*,*,#221259,.T.); +#222771 = ORIENTED_EDGE('',*,*,#221290,.T.); +#222772 = ORIENTED_EDGE('',*,*,#221321,.T.); +#222773 = ORIENTED_EDGE('',*,*,#221352,.T.); +#222774 = ORIENTED_EDGE('',*,*,#221383,.T.); +#222775 = ORIENTED_EDGE('',*,*,#221414,.T.); +#222776 = ORIENTED_EDGE('',*,*,#221445,.T.); +#222777 = ORIENTED_EDGE('',*,*,#221476,.T.); +#222778 = ORIENTED_EDGE('',*,*,#221507,.T.); +#222779 = ORIENTED_EDGE('',*,*,#221538,.T.); +#222780 = ORIENTED_EDGE('',*,*,#221570,.T.); +#222781 = ORIENTED_EDGE('',*,*,#221602,.T.); +#222782 = ORIENTED_EDGE('',*,*,#221633,.T.); +#222783 = ORIENTED_EDGE('',*,*,#221664,.T.); +#222784 = ORIENTED_EDGE('',*,*,#221695,.T.); +#222785 = ORIENTED_EDGE('',*,*,#221726,.T.); +#222786 = ORIENTED_EDGE('',*,*,#221757,.T.); +#222787 = ORIENTED_EDGE('',*,*,#221788,.T.); +#222788 = ORIENTED_EDGE('',*,*,#221819,.T.); +#222789 = ORIENTED_EDGE('',*,*,#221850,.T.); +#222790 = ORIENTED_EDGE('',*,*,#221881,.T.); +#222791 = ORIENTED_EDGE('',*,*,#221912,.T.); +#222792 = ORIENTED_EDGE('',*,*,#221943,.T.); +#222793 = ORIENTED_EDGE('',*,*,#221974,.T.); +#222794 = ORIENTED_EDGE('',*,*,#222005,.T.); +#222795 = ORIENTED_EDGE('',*,*,#222036,.T.); +#222796 = ORIENTED_EDGE('',*,*,#222067,.T.); +#222797 = ORIENTED_EDGE('',*,*,#222098,.T.); +#222798 = ORIENTED_EDGE('',*,*,#222129,.T.); +#222799 = ORIENTED_EDGE('',*,*,#222161,.T.); +#222800 = ORIENTED_EDGE('',*,*,#222193,.T.); +#222801 = ORIENTED_EDGE('',*,*,#222224,.T.); +#222802 = ORIENTED_EDGE('',*,*,#222255,.T.); +#222803 = ORIENTED_EDGE('',*,*,#222286,.T.); +#222804 = ORIENTED_EDGE('',*,*,#222317,.T.); +#222805 = ORIENTED_EDGE('',*,*,#222348,.T.); +#222806 = ORIENTED_EDGE('',*,*,#222379,.T.); +#222807 = ORIENTED_EDGE('',*,*,#222410,.T.); +#222808 = ORIENTED_EDGE('',*,*,#222441,.T.); +#222809 = ORIENTED_EDGE('',*,*,#222472,.T.); +#222810 = ORIENTED_EDGE('',*,*,#222503,.T.); +#222811 = ORIENTED_EDGE('',*,*,#222534,.T.); +#222812 = ORIENTED_EDGE('',*,*,#222565,.T.); +#222813 = ORIENTED_EDGE('',*,*,#222596,.T.); +#222814 = ORIENTED_EDGE('',*,*,#222627,.T.); +#222815 = ORIENTED_EDGE('',*,*,#222659,.T.); +#222816 = ORIENTED_EDGE('',*,*,#222682,.T.); +#222817 = FACE_BOUND('',#222818,.F.); +#222818 = EDGE_LOOP('',(#222819)); +#222819 = ORIENTED_EDGE('',*,*,#222714,.T.); +#222820 = FACE_BOUND('',#222821,.F.); +#222821 = EDGE_LOOP('',(#222822)); +#222822 = ORIENTED_EDGE('',*,*,#222747,.T.); +#222823 = PLANE('',#222824); +#222824 = AXIS2_PLACEMENT_3D('',#222825,#222826,#222827); +#222825 = CARTESIAN_POINT('',(0.,0.,0.)); +#222826 = DIRECTION('',(-0.,-0.,-1.)); +#222827 = DIRECTION('',(-1.,0.,0.)); +#222828 = ADVANCED_FACE('',(#222829,#222887,#222890),#222893,.T.); +#222829 = FACE_BOUND('',#222830,.T.); +#222830 = EDGE_LOOP('',(#222831,#222832,#222833,#222834,#222835,#222836, + #222837,#222838,#222839,#222840,#222841,#222842,#222843,#222844, + #222845,#222846,#222847,#222848,#222849,#222850,#222851,#222852, + #222853,#222854,#222855,#222856,#222857,#222858,#222859,#222860, + #222861,#222862,#222863,#222864,#222865,#222866,#222867,#222868, + #222869,#222870,#222871,#222872,#222873,#222874,#222875,#222876, + #222877,#222878,#222879,#222880,#222881,#222882,#222883,#222884, + #222885,#222886)); +#222831 = ORIENTED_EDGE('',*,*,#220964,.T.); +#222832 = ORIENTED_EDGE('',*,*,#220995,.T.); +#222833 = ORIENTED_EDGE('',*,*,#221026,.T.); +#222834 = ORIENTED_EDGE('',*,*,#221057,.T.); +#222835 = ORIENTED_EDGE('',*,*,#221088,.T.); +#222836 = ORIENTED_EDGE('',*,*,#221119,.T.); +#222837 = ORIENTED_EDGE('',*,*,#221150,.T.); +#222838 = ORIENTED_EDGE('',*,*,#221181,.T.); +#222839 = ORIENTED_EDGE('',*,*,#221212,.T.); +#222840 = ORIENTED_EDGE('',*,*,#221243,.T.); +#222841 = ORIENTED_EDGE('',*,*,#221274,.T.); +#222842 = ORIENTED_EDGE('',*,*,#221305,.T.); +#222843 = ORIENTED_EDGE('',*,*,#221336,.T.); +#222844 = ORIENTED_EDGE('',*,*,#221367,.T.); +#222845 = ORIENTED_EDGE('',*,*,#221398,.T.); +#222846 = ORIENTED_EDGE('',*,*,#221429,.T.); +#222847 = ORIENTED_EDGE('',*,*,#221460,.T.); +#222848 = ORIENTED_EDGE('',*,*,#221491,.T.); +#222849 = ORIENTED_EDGE('',*,*,#221522,.T.); +#222850 = ORIENTED_EDGE('',*,*,#221553,.T.); +#222851 = ORIENTED_EDGE('',*,*,#221586,.T.); +#222852 = ORIENTED_EDGE('',*,*,#221617,.T.); +#222853 = ORIENTED_EDGE('',*,*,#221648,.T.); +#222854 = ORIENTED_EDGE('',*,*,#221679,.T.); +#222855 = ORIENTED_EDGE('',*,*,#221710,.T.); +#222856 = ORIENTED_EDGE('',*,*,#221741,.T.); +#222857 = ORIENTED_EDGE('',*,*,#221772,.T.); +#222858 = ORIENTED_EDGE('',*,*,#221803,.T.); +#222859 = ORIENTED_EDGE('',*,*,#221834,.T.); +#222860 = ORIENTED_EDGE('',*,*,#221865,.T.); +#222861 = ORIENTED_EDGE('',*,*,#221896,.T.); +#222862 = ORIENTED_EDGE('',*,*,#221927,.T.); +#222863 = ORIENTED_EDGE('',*,*,#221958,.T.); +#222864 = ORIENTED_EDGE('',*,*,#221989,.T.); +#222865 = ORIENTED_EDGE('',*,*,#222020,.T.); +#222866 = ORIENTED_EDGE('',*,*,#222051,.T.); +#222867 = ORIENTED_EDGE('',*,*,#222082,.T.); +#222868 = ORIENTED_EDGE('',*,*,#222113,.T.); +#222869 = ORIENTED_EDGE('',*,*,#222144,.T.); +#222870 = ORIENTED_EDGE('',*,*,#222177,.T.); +#222871 = ORIENTED_EDGE('',*,*,#222208,.T.); +#222872 = ORIENTED_EDGE('',*,*,#222239,.T.); +#222873 = ORIENTED_EDGE('',*,*,#222270,.T.); +#222874 = ORIENTED_EDGE('',*,*,#222301,.T.); +#222875 = ORIENTED_EDGE('',*,*,#222332,.T.); +#222876 = ORIENTED_EDGE('',*,*,#222363,.T.); +#222877 = ORIENTED_EDGE('',*,*,#222394,.T.); +#222878 = ORIENTED_EDGE('',*,*,#222425,.T.); +#222879 = ORIENTED_EDGE('',*,*,#222456,.T.); +#222880 = ORIENTED_EDGE('',*,*,#222487,.T.); +#222881 = ORIENTED_EDGE('',*,*,#222518,.T.); +#222882 = ORIENTED_EDGE('',*,*,#222549,.T.); +#222883 = ORIENTED_EDGE('',*,*,#222580,.T.); +#222884 = ORIENTED_EDGE('',*,*,#222611,.T.); +#222885 = ORIENTED_EDGE('',*,*,#222642,.T.); +#222886 = ORIENTED_EDGE('',*,*,#222675,.T.); +#222887 = FACE_BOUND('',#222888,.T.); +#222888 = EDGE_LOOP('',(#222889)); +#222889 = ORIENTED_EDGE('',*,*,#222706,.T.); +#222890 = FACE_BOUND('',#222891,.T.); +#222891 = EDGE_LOOP('',(#222892)); +#222892 = ORIENTED_EDGE('',*,*,#222739,.T.); +#222893 = PLANE('',#222894); +#222894 = AXIS2_PLACEMENT_3D('',#222895,#222896,#222897); +#222895 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#222896 = DIRECTION('',(-0.,-0.,-1.)); +#222897 = DIRECTION('',(-1.,0.,0.)); +#222898 = MANIFOLD_SOLID_BREP('',#222899); +#222899 = CLOSED_SHELL('',(#222900,#222940,#222971,#223002,#223033, + #223064,#223097,#223128,#223159,#223190,#223221,#223252,#223283, + #223314,#223345,#223376,#223409,#223431,#223464,#223497,#223528)); +#222900 = ADVANCED_FACE('',(#222901),#222935,.T.); +#222901 = FACE_BOUND('',#222902,.T.); +#222902 = EDGE_LOOP('',(#222903,#222913,#222921,#222929)); +#222903 = ORIENTED_EDGE('',*,*,#222904,.T.); +#222904 = EDGE_CURVE('',#222905,#222907,#222909,.T.); +#222905 = VERTEX_POINT('',#222906); +#222906 = CARTESIAN_POINT('',(140.324449,-89.987682,1.51)); +#222907 = VERTEX_POINT('',#222908); +#222908 = CARTESIAN_POINT('',(140.324449,-89.987682,1.545)); +#222909 = LINE('',#222910,#222911); +#222910 = CARTESIAN_POINT('',(140.324449,-89.987682,1.51)); +#222911 = VECTOR('',#222912,1.); +#222912 = DIRECTION('',(0.,0.,1.)); +#222913 = ORIENTED_EDGE('',*,*,#222914,.T.); +#222914 = EDGE_CURVE('',#222907,#222915,#222917,.T.); +#222915 = VERTEX_POINT('',#222916); +#222916 = CARTESIAN_POINT('',(139.3,-91.012132,1.545)); +#222917 = LINE('',#222918,#222919); +#222918 = CARTESIAN_POINT('',(140.324449,-89.987682,1.545)); +#222919 = VECTOR('',#222920,1.); +#222920 = DIRECTION('',(-0.707106436071,-0.707107126302,0.)); +#222921 = ORIENTED_EDGE('',*,*,#222922,.F.); +#222922 = EDGE_CURVE('',#222923,#222915,#222925,.T.); +#222923 = VERTEX_POINT('',#222924); +#222924 = CARTESIAN_POINT('',(139.3,-91.012132,1.51)); +#222925 = LINE('',#222926,#222927); +#222926 = CARTESIAN_POINT('',(139.3,-91.012132,1.51)); +#222927 = VECTOR('',#222928,1.); +#222928 = DIRECTION('',(0.,0.,1.)); +#222929 = ORIENTED_EDGE('',*,*,#222930,.F.); +#222930 = EDGE_CURVE('',#222905,#222923,#222931,.T.); +#222931 = LINE('',#222932,#222933); +#222932 = CARTESIAN_POINT('',(140.324449,-89.987682,1.51)); +#222933 = VECTOR('',#222934,1.); +#222934 = DIRECTION('',(-0.707106436071,-0.707107126302,0.)); +#222935 = PLANE('',#222936); +#222936 = AXIS2_PLACEMENT_3D('',#222937,#222938,#222939); +#222937 = CARTESIAN_POINT('',(140.324449,-89.987682,1.51)); +#222938 = DIRECTION('',(0.707107126302,-0.707106436071,0.)); +#222939 = DIRECTION('',(-0.707106436071,-0.707107126302,0.)); +#222940 = ADVANCED_FACE('',(#222941),#222966,.T.); +#222941 = FACE_BOUND('',#222942,.T.); +#222942 = EDGE_LOOP('',(#222943,#222944,#222952,#222960)); +#222943 = ORIENTED_EDGE('',*,*,#222922,.T.); +#222944 = ORIENTED_EDGE('',*,*,#222945,.T.); +#222945 = EDGE_CURVE('',#222915,#222946,#222948,.T.); +#222946 = VERTEX_POINT('',#222947); +#222947 = CARTESIAN_POINT('',(139.3,-113.894975,1.545)); +#222948 = LINE('',#222949,#222950); +#222949 = CARTESIAN_POINT('',(139.3,-91.012132,1.545)); +#222950 = VECTOR('',#222951,1.); +#222951 = DIRECTION('',(0.,-1.,0.)); +#222952 = ORIENTED_EDGE('',*,*,#222953,.F.); +#222953 = EDGE_CURVE('',#222954,#222946,#222956,.T.); +#222954 = VERTEX_POINT('',#222955); +#222955 = CARTESIAN_POINT('',(139.3,-113.894975,1.51)); +#222956 = LINE('',#222957,#222958); +#222957 = CARTESIAN_POINT('',(139.3,-113.894975,1.51)); +#222958 = VECTOR('',#222959,1.); +#222959 = DIRECTION('',(0.,0.,1.)); +#222960 = ORIENTED_EDGE('',*,*,#222961,.F.); +#222961 = EDGE_CURVE('',#222923,#222954,#222962,.T.); +#222962 = LINE('',#222963,#222964); +#222963 = CARTESIAN_POINT('',(139.3,-91.012132,1.51)); +#222964 = VECTOR('',#222965,1.); +#222965 = DIRECTION('',(0.,-1.,0.)); +#222966 = PLANE('',#222967); +#222967 = AXIS2_PLACEMENT_3D('',#222968,#222969,#222970); +#222968 = CARTESIAN_POINT('',(139.3,-91.012132,1.51)); +#222969 = DIRECTION('',(1.,0.,-0.)); +#222970 = DIRECTION('',(0.,-1.,0.)); +#222971 = ADVANCED_FACE('',(#222972),#222997,.T.); +#222972 = FACE_BOUND('',#222973,.T.); +#222973 = EDGE_LOOP('',(#222974,#222975,#222983,#222991)); +#222974 = ORIENTED_EDGE('',*,*,#222953,.T.); +#222975 = ORIENTED_EDGE('',*,*,#222976,.T.); +#222976 = EDGE_CURVE('',#222946,#222977,#222979,.T.); +#222977 = VERTEX_POINT('',#222978); +#222978 = CARTESIAN_POINT('',(142.055025,-116.65,1.545)); +#222979 = LINE('',#222980,#222981); +#222980 = CARTESIAN_POINT('',(139.3,-113.894975,1.545)); +#222981 = VECTOR('',#222982,1.); +#222982 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#222983 = ORIENTED_EDGE('',*,*,#222984,.F.); +#222984 = EDGE_CURVE('',#222985,#222977,#222987,.T.); +#222985 = VERTEX_POINT('',#222986); +#222986 = CARTESIAN_POINT('',(142.055025,-116.65,1.51)); +#222987 = LINE('',#222988,#222989); +#222988 = CARTESIAN_POINT('',(142.055025,-116.65,1.51)); +#222989 = VECTOR('',#222990,1.); +#222990 = DIRECTION('',(0.,0.,1.)); +#222991 = ORIENTED_EDGE('',*,*,#222992,.F.); +#222992 = EDGE_CURVE('',#222954,#222985,#222993,.T.); +#222993 = LINE('',#222994,#222995); +#222994 = CARTESIAN_POINT('',(139.3,-113.894975,1.51)); +#222995 = VECTOR('',#222996,1.); +#222996 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#222997 = PLANE('',#222998); +#222998 = AXIS2_PLACEMENT_3D('',#222999,#223000,#223001); +#222999 = CARTESIAN_POINT('',(139.3,-113.894975,1.51)); +#223000 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#223001 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#223002 = ADVANCED_FACE('',(#223003),#223028,.T.); +#223003 = FACE_BOUND('',#223004,.T.); +#223004 = EDGE_LOOP('',(#223005,#223006,#223014,#223022)); +#223005 = ORIENTED_EDGE('',*,*,#222984,.T.); +#223006 = ORIENTED_EDGE('',*,*,#223007,.T.); +#223007 = EDGE_CURVE('',#222977,#223008,#223010,.T.); +#223008 = VERTEX_POINT('',#223009); +#223009 = CARTESIAN_POINT('',(143.843156,-116.65,1.545)); +#223010 = LINE('',#223011,#223012); +#223011 = CARTESIAN_POINT('',(142.055025,-116.65,1.545)); +#223012 = VECTOR('',#223013,1.); +#223013 = DIRECTION('',(1.,0.,0.)); +#223014 = ORIENTED_EDGE('',*,*,#223015,.F.); +#223015 = EDGE_CURVE('',#223016,#223008,#223018,.T.); +#223016 = VERTEX_POINT('',#223017); +#223017 = CARTESIAN_POINT('',(143.843156,-116.65,1.51)); +#223018 = LINE('',#223019,#223020); +#223019 = CARTESIAN_POINT('',(143.843156,-116.65,1.51)); +#223020 = VECTOR('',#223021,1.); +#223021 = DIRECTION('',(0.,0.,1.)); +#223022 = ORIENTED_EDGE('',*,*,#223023,.F.); +#223023 = EDGE_CURVE('',#222985,#223016,#223024,.T.); +#223024 = LINE('',#223025,#223026); +#223025 = CARTESIAN_POINT('',(142.055025,-116.65,1.51)); +#223026 = VECTOR('',#223027,1.); +#223027 = DIRECTION('',(1.,0.,0.)); +#223028 = PLANE('',#223029); +#223029 = AXIS2_PLACEMENT_3D('',#223030,#223031,#223032); +#223030 = CARTESIAN_POINT('',(142.055025,-116.65,1.51)); +#223031 = DIRECTION('',(0.,1.,0.)); +#223032 = DIRECTION('',(1.,0.,0.)); +#223033 = ADVANCED_FACE('',(#223034),#223059,.T.); +#223034 = FACE_BOUND('',#223035,.T.); +#223035 = EDGE_LOOP('',(#223036,#223037,#223045,#223053)); +#223036 = ORIENTED_EDGE('',*,*,#223015,.T.); +#223037 = ORIENTED_EDGE('',*,*,#223038,.T.); +#223038 = EDGE_CURVE('',#223008,#223039,#223041,.T.); +#223039 = VERTEX_POINT('',#223040); +#223040 = CARTESIAN_POINT('',(143.861994,-116.617372,1.545)); +#223041 = LINE('',#223042,#223043); +#223042 = CARTESIAN_POINT('',(143.843156,-116.65,1.545)); +#223043 = VECTOR('',#223044,1.); +#223044 = DIRECTION('',(0.500004288243,0.866022927952,0.)); +#223045 = ORIENTED_EDGE('',*,*,#223046,.F.); +#223046 = EDGE_CURVE('',#223047,#223039,#223049,.T.); +#223047 = VERTEX_POINT('',#223048); +#223048 = CARTESIAN_POINT('',(143.861994,-116.617372,1.51)); +#223049 = LINE('',#223050,#223051); +#223050 = CARTESIAN_POINT('',(143.861994,-116.617372,1.51)); +#223051 = VECTOR('',#223052,1.); +#223052 = DIRECTION('',(0.,0.,1.)); +#223053 = ORIENTED_EDGE('',*,*,#223054,.F.); +#223054 = EDGE_CURVE('',#223016,#223047,#223055,.T.); +#223055 = LINE('',#223056,#223057); +#223056 = CARTESIAN_POINT('',(143.843156,-116.65,1.51)); +#223057 = VECTOR('',#223058,1.); +#223058 = DIRECTION('',(0.500004288243,0.866022927952,0.)); +#223059 = PLANE('',#223060); +#223060 = AXIS2_PLACEMENT_3D('',#223061,#223062,#223063); +#223061 = CARTESIAN_POINT('',(143.843156,-116.65,1.51)); +#223062 = DIRECTION('',(-0.866022927952,0.500004288243,0.)); +#223063 = DIRECTION('',(0.500004288243,0.866022927952,0.)); +#223064 = ADVANCED_FACE('',(#223065),#223092,.T.); +#223065 = FACE_BOUND('',#223066,.T.); +#223066 = EDGE_LOOP('',(#223067,#223068,#223077,#223085)); +#223067 = ORIENTED_EDGE('',*,*,#223046,.T.); +#223068 = ORIENTED_EDGE('',*,*,#223069,.T.); +#223069 = EDGE_CURVE('',#223039,#223070,#223072,.T.); +#223070 = VERTEX_POINT('',#223071); +#223071 = CARTESIAN_POINT('',(143.861994,-116.982628,1.545)); +#223072 = CIRCLE('',#223073,0.299999660343); +#223073 = AXIS2_PLACEMENT_3D('',#223074,#223075,#223076); +#223074 = CARTESIAN_POINT('',(144.09999990291,-116.8,1.545)); +#223075 = DIRECTION('',(0.,0.,-1.)); +#223076 = DIRECTION('',(-0.793353907941,0.608760689232,-0.)); +#223077 = ORIENTED_EDGE('',*,*,#223078,.F.); +#223078 = EDGE_CURVE('',#223079,#223070,#223081,.T.); +#223079 = VERTEX_POINT('',#223080); +#223080 = CARTESIAN_POINT('',(143.861994,-116.982628,1.51)); +#223081 = LINE('',#223082,#223083); +#223082 = CARTESIAN_POINT('',(143.861994,-116.982628,1.51)); +#223083 = VECTOR('',#223084,1.); +#223084 = DIRECTION('',(0.,0.,1.)); +#223085 = ORIENTED_EDGE('',*,*,#223086,.F.); +#223086 = EDGE_CURVE('',#223047,#223079,#223087,.T.); +#223087 = CIRCLE('',#223088,0.299999660343); +#223088 = AXIS2_PLACEMENT_3D('',#223089,#223090,#223091); +#223089 = CARTESIAN_POINT('',(144.09999990291,-116.8,1.51)); +#223090 = DIRECTION('',(0.,0.,-1.)); +#223091 = DIRECTION('',(-0.793353907941,0.608760689232,-0.)); +#223092 = CYLINDRICAL_SURFACE('',#223093,0.299999660343); +#223093 = AXIS2_PLACEMENT_3D('',#223094,#223095,#223096); +#223094 = CARTESIAN_POINT('',(144.09999990291,-116.8,1.51)); +#223095 = DIRECTION('',(0.,0.,-1.)); +#223096 = DIRECTION('',(-0.793353907941,0.608760689232,-0.)); +#223097 = ADVANCED_FACE('',(#223098),#223123,.T.); +#223098 = FACE_BOUND('',#223099,.T.); +#223099 = EDGE_LOOP('',(#223100,#223101,#223109,#223117)); +#223100 = ORIENTED_EDGE('',*,*,#223078,.T.); +#223101 = ORIENTED_EDGE('',*,*,#223102,.T.); +#223102 = EDGE_CURVE('',#223070,#223103,#223105,.T.); +#223103 = VERTEX_POINT('',#223104); +#223104 = CARTESIAN_POINT('',(143.843156,-116.95,1.545)); +#223105 = LINE('',#223106,#223107); +#223106 = CARTESIAN_POINT('',(143.861994,-116.982628,1.545)); +#223107 = VECTOR('',#223108,1.); +#223108 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#223109 = ORIENTED_EDGE('',*,*,#223110,.F.); +#223110 = EDGE_CURVE('',#223111,#223103,#223113,.T.); +#223111 = VERTEX_POINT('',#223112); +#223112 = CARTESIAN_POINT('',(143.843156,-116.95,1.51)); +#223113 = LINE('',#223114,#223115); +#223114 = CARTESIAN_POINT('',(143.843156,-116.95,1.51)); +#223115 = VECTOR('',#223116,1.); +#223116 = DIRECTION('',(0.,0.,1.)); +#223117 = ORIENTED_EDGE('',*,*,#223118,.F.); +#223118 = EDGE_CURVE('',#223079,#223111,#223119,.T.); +#223119 = LINE('',#223120,#223121); +#223120 = CARTESIAN_POINT('',(143.861994,-116.982628,1.51)); +#223121 = VECTOR('',#223122,1.); +#223122 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#223123 = PLANE('',#223124); +#223124 = AXIS2_PLACEMENT_3D('',#223125,#223126,#223127); +#223125 = CARTESIAN_POINT('',(143.861994,-116.982628,1.51)); +#223126 = DIRECTION('',(-0.866022927952,-0.500004288243,0.)); +#223127 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#223128 = ADVANCED_FACE('',(#223129),#223154,.T.); +#223129 = FACE_BOUND('',#223130,.T.); +#223130 = EDGE_LOOP('',(#223131,#223132,#223140,#223148)); +#223131 = ORIENTED_EDGE('',*,*,#223110,.T.); +#223132 = ORIENTED_EDGE('',*,*,#223133,.T.); +#223133 = EDGE_CURVE('',#223103,#223134,#223136,.T.); +#223134 = VERTEX_POINT('',#223135); +#223135 = CARTESIAN_POINT('',(141.963629,-116.947118,1.545)); +#223136 = LINE('',#223137,#223138); +#223137 = CARTESIAN_POINT('',(143.843156,-116.95,1.545)); +#223138 = VECTOR('',#223139,1.); +#223139 = DIRECTION('',(-0.999998824399,1.533362708765E-03,0.)); +#223140 = ORIENTED_EDGE('',*,*,#223141,.F.); +#223141 = EDGE_CURVE('',#223142,#223134,#223144,.T.); +#223142 = VERTEX_POINT('',#223143); +#223143 = CARTESIAN_POINT('',(141.963629,-116.947118,1.51)); +#223144 = LINE('',#223145,#223146); +#223145 = CARTESIAN_POINT('',(141.963629,-116.947118,1.51)); +#223146 = VECTOR('',#223147,1.); +#223147 = DIRECTION('',(0.,0.,1.)); +#223148 = ORIENTED_EDGE('',*,*,#223149,.F.); +#223149 = EDGE_CURVE('',#223111,#223142,#223150,.T.); +#223150 = LINE('',#223151,#223152); +#223151 = CARTESIAN_POINT('',(143.843156,-116.95,1.51)); +#223152 = VECTOR('',#223153,1.); +#223153 = DIRECTION('',(-0.999998824399,1.533362708765E-03,0.)); +#223154 = PLANE('',#223155); +#223155 = AXIS2_PLACEMENT_3D('',#223156,#223157,#223158); +#223156 = CARTESIAN_POINT('',(143.843156,-116.95,1.51)); +#223157 = DIRECTION('',(-1.533362708765E-03,-0.999998824399,0.)); +#223158 = DIRECTION('',(-0.999998824399,1.533362708765E-03,0.)); +#223159 = ADVANCED_FACE('',(#223160),#223185,.T.); +#223160 = FACE_BOUND('',#223161,.T.); +#223161 = EDGE_LOOP('',(#223162,#223163,#223171,#223179)); +#223162 = ORIENTED_EDGE('',*,*,#223141,.T.); +#223163 = ORIENTED_EDGE('',*,*,#223164,.T.); +#223164 = EDGE_CURVE('',#223134,#223165,#223167,.T.); +#223165 = VERTEX_POINT('',#223166); +#223166 = CARTESIAN_POINT('',(141.909558,-116.924721,1.545)); +#223167 = LINE('',#223168,#223169); +#223168 = CARTESIAN_POINT('',(141.963629,-116.947118,1.545)); +#223169 = VECTOR('',#223170,1.); +#223170 = DIRECTION('',(-0.923879179303,0.382684285085,0.)); +#223171 = ORIENTED_EDGE('',*,*,#223172,.F.); +#223172 = EDGE_CURVE('',#223173,#223165,#223175,.T.); +#223173 = VERTEX_POINT('',#223174); +#223174 = CARTESIAN_POINT('',(141.909558,-116.924721,1.51)); +#223175 = LINE('',#223176,#223177); +#223176 = CARTESIAN_POINT('',(141.909558,-116.924721,1.51)); +#223177 = VECTOR('',#223178,1.); +#223178 = DIRECTION('',(0.,0.,1.)); +#223179 = ORIENTED_EDGE('',*,*,#223180,.F.); +#223180 = EDGE_CURVE('',#223142,#223173,#223181,.T.); +#223181 = LINE('',#223182,#223183); +#223182 = CARTESIAN_POINT('',(141.963629,-116.947118,1.51)); +#223183 = VECTOR('',#223184,1.); +#223184 = DIRECTION('',(-0.923879179303,0.382684285085,0.)); +#223185 = PLANE('',#223186); +#223186 = AXIS2_PLACEMENT_3D('',#223187,#223188,#223189); +#223187 = CARTESIAN_POINT('',(141.963629,-116.947118,1.51)); +#223188 = DIRECTION('',(-0.382684285085,-0.923879179303,0.)); +#223189 = DIRECTION('',(-0.923879179303,0.382684285085,0.)); +#223190 = ADVANCED_FACE('',(#223191),#223216,.T.); +#223191 = FACE_BOUND('',#223192,.T.); +#223192 = EDGE_LOOP('',(#223193,#223194,#223202,#223210)); +#223193 = ORIENTED_EDGE('',*,*,#223172,.T.); +#223194 = ORIENTED_EDGE('',*,*,#223195,.T.); +#223195 = EDGE_CURVE('',#223165,#223196,#223198,.T.); +#223196 = VERTEX_POINT('',#223197); +#223197 = CARTESIAN_POINT('',(139.025279,-114.040442,1.545)); +#223198 = LINE('',#223199,#223200); +#223199 = CARTESIAN_POINT('',(141.909558,-116.924721,1.545)); +#223200 = VECTOR('',#223201,1.); +#223201 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223202 = ORIENTED_EDGE('',*,*,#223203,.F.); +#223203 = EDGE_CURVE('',#223204,#223196,#223206,.T.); +#223204 = VERTEX_POINT('',#223205); +#223205 = CARTESIAN_POINT('',(139.025279,-114.040442,1.51)); +#223206 = LINE('',#223207,#223208); +#223207 = CARTESIAN_POINT('',(139.025279,-114.040442,1.51)); +#223208 = VECTOR('',#223209,1.); +#223209 = DIRECTION('',(0.,0.,1.)); +#223210 = ORIENTED_EDGE('',*,*,#223211,.F.); +#223211 = EDGE_CURVE('',#223173,#223204,#223212,.T.); +#223212 = LINE('',#223213,#223214); +#223213 = CARTESIAN_POINT('',(141.909558,-116.924721,1.51)); +#223214 = VECTOR('',#223215,1.); +#223215 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223216 = PLANE('',#223217); +#223217 = AXIS2_PLACEMENT_3D('',#223218,#223219,#223220); +#223218 = CARTESIAN_POINT('',(141.909558,-116.924721,1.51)); +#223219 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223220 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#223221 = ADVANCED_FACE('',(#223222),#223247,.T.); +#223222 = FACE_BOUND('',#223223,.T.); +#223223 = EDGE_LOOP('',(#223224,#223225,#223233,#223241)); +#223224 = ORIENTED_EDGE('',*,*,#223203,.T.); +#223225 = ORIENTED_EDGE('',*,*,#223226,.T.); +#223226 = EDGE_CURVE('',#223196,#223227,#223229,.T.); +#223227 = VERTEX_POINT('',#223228); +#223228 = CARTESIAN_POINT('',(139.002882,-113.98637,1.545)); +#223229 = LINE('',#223230,#223231); +#223230 = CARTESIAN_POINT('',(139.025279,-114.040442,1.545)); +#223231 = VECTOR('',#223232,1.); +#223232 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#223233 = ORIENTED_EDGE('',*,*,#223234,.F.); +#223234 = EDGE_CURVE('',#223235,#223227,#223237,.T.); +#223235 = VERTEX_POINT('',#223236); +#223236 = CARTESIAN_POINT('',(139.002882,-113.98637,1.51)); +#223237 = LINE('',#223238,#223239); +#223238 = CARTESIAN_POINT('',(139.002882,-113.98637,1.51)); +#223239 = VECTOR('',#223240,1.); +#223240 = DIRECTION('',(0.,0.,1.)); +#223241 = ORIENTED_EDGE('',*,*,#223242,.F.); +#223242 = EDGE_CURVE('',#223204,#223235,#223243,.T.); +#223243 = LINE('',#223244,#223245); +#223244 = CARTESIAN_POINT('',(139.025279,-114.040442,1.51)); +#223245 = VECTOR('',#223246,1.); +#223246 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#223247 = PLANE('',#223248); +#223248 = AXIS2_PLACEMENT_3D('',#223249,#223250,#223251); +#223249 = CARTESIAN_POINT('',(139.025279,-114.040442,1.51)); +#223250 = DIRECTION('',(-0.923881681501,-0.382678244204,0.)); +#223251 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#223252 = ADVANCED_FACE('',(#223253),#223278,.T.); +#223253 = FACE_BOUND('',#223254,.T.); +#223254 = EDGE_LOOP('',(#223255,#223256,#223264,#223272)); +#223255 = ORIENTED_EDGE('',*,*,#223234,.T.); +#223256 = ORIENTED_EDGE('',*,*,#223257,.T.); +#223257 = EDGE_CURVE('',#223227,#223258,#223260,.T.); +#223258 = VERTEX_POINT('',#223259); +#223259 = CARTESIAN_POINT('',(139.002882,-90.920736,1.545)); +#223260 = LINE('',#223261,#223262); +#223261 = CARTESIAN_POINT('',(139.002882,-113.98637,1.545)); +#223262 = VECTOR('',#223263,1.); +#223263 = DIRECTION('',(0.,1.,0.)); +#223264 = ORIENTED_EDGE('',*,*,#223265,.F.); +#223265 = EDGE_CURVE('',#223266,#223258,#223268,.T.); +#223266 = VERTEX_POINT('',#223267); +#223267 = CARTESIAN_POINT('',(139.002882,-90.920736,1.51)); +#223268 = LINE('',#223269,#223270); +#223269 = CARTESIAN_POINT('',(139.002882,-90.920736,1.51)); +#223270 = VECTOR('',#223271,1.); +#223271 = DIRECTION('',(0.,0.,1.)); +#223272 = ORIENTED_EDGE('',*,*,#223273,.F.); +#223273 = EDGE_CURVE('',#223235,#223266,#223274,.T.); +#223274 = LINE('',#223275,#223276); +#223275 = CARTESIAN_POINT('',(139.002882,-113.98637,1.51)); +#223276 = VECTOR('',#223277,1.); +#223277 = DIRECTION('',(0.,1.,0.)); +#223278 = PLANE('',#223279); +#223279 = AXIS2_PLACEMENT_3D('',#223280,#223281,#223282); +#223280 = CARTESIAN_POINT('',(139.002882,-113.98637,1.51)); +#223281 = DIRECTION('',(-1.,0.,0.)); +#223282 = DIRECTION('',(0.,1.,0.)); +#223283 = ADVANCED_FACE('',(#223284),#223309,.T.); +#223284 = FACE_BOUND('',#223285,.T.); +#223285 = EDGE_LOOP('',(#223286,#223287,#223295,#223303)); +#223286 = ORIENTED_EDGE('',*,*,#223265,.T.); +#223287 = ORIENTED_EDGE('',*,*,#223288,.T.); +#223288 = EDGE_CURVE('',#223258,#223289,#223291,.T.); +#223289 = VERTEX_POINT('',#223290); +#223290 = CARTESIAN_POINT('',(139.025279,-90.866665,1.545)); +#223291 = LINE('',#223292,#223293); +#223292 = CARTESIAN_POINT('',(139.002882,-90.920736,1.545)); +#223293 = VECTOR('',#223294,1.); +#223294 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#223295 = ORIENTED_EDGE('',*,*,#223296,.F.); +#223296 = EDGE_CURVE('',#223297,#223289,#223299,.T.); +#223297 = VERTEX_POINT('',#223298); +#223298 = CARTESIAN_POINT('',(139.025279,-90.866665,1.51)); +#223299 = LINE('',#223300,#223301); +#223300 = CARTESIAN_POINT('',(139.025279,-90.866665,1.51)); +#223301 = VECTOR('',#223302,1.); +#223302 = DIRECTION('',(0.,0.,1.)); +#223303 = ORIENTED_EDGE('',*,*,#223304,.F.); +#223304 = EDGE_CURVE('',#223266,#223297,#223305,.T.); +#223305 = LINE('',#223306,#223307); +#223306 = CARTESIAN_POINT('',(139.002882,-90.920736,1.51)); +#223307 = VECTOR('',#223308,1.); +#223308 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#223309 = PLANE('',#223310); +#223310 = AXIS2_PLACEMENT_3D('',#223311,#223312,#223313); +#223311 = CARTESIAN_POINT('',(139.002882,-90.920736,1.51)); +#223312 = DIRECTION('',(-0.923879179303,0.382684285085,0.)); +#223313 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#223314 = ADVANCED_FACE('',(#223315),#223340,.T.); +#223315 = FACE_BOUND('',#223316,.T.); +#223316 = EDGE_LOOP('',(#223317,#223318,#223326,#223334)); +#223317 = ORIENTED_EDGE('',*,*,#223296,.T.); +#223318 = ORIENTED_EDGE('',*,*,#223319,.T.); +#223319 = EDGE_CURVE('',#223289,#223320,#223322,.T.); +#223320 = VERTEX_POINT('',#223321); +#223321 = CARTESIAN_POINT('',(140.112317,-89.77555,1.545)); +#223322 = LINE('',#223323,#223324); +#223323 = CARTESIAN_POINT('',(139.025279,-90.866665,1.545)); +#223324 = VECTOR('',#223325,1.); +#223325 = DIRECTION('',(0.705782004035,0.708429080982,0.)); +#223326 = ORIENTED_EDGE('',*,*,#223327,.F.); +#223327 = EDGE_CURVE('',#223328,#223320,#223330,.T.); +#223328 = VERTEX_POINT('',#223329); +#223329 = CARTESIAN_POINT('',(140.112317,-89.77555,1.51)); +#223330 = LINE('',#223331,#223332); +#223331 = CARTESIAN_POINT('',(140.112317,-89.77555,1.51)); +#223332 = VECTOR('',#223333,1.); +#223333 = DIRECTION('',(0.,0.,1.)); +#223334 = ORIENTED_EDGE('',*,*,#223335,.F.); +#223335 = EDGE_CURVE('',#223297,#223328,#223336,.T.); +#223336 = LINE('',#223337,#223338); +#223337 = CARTESIAN_POINT('',(139.025279,-90.866665,1.51)); +#223338 = VECTOR('',#223339,1.); +#223339 = DIRECTION('',(0.705782004035,0.708429080982,0.)); +#223340 = PLANE('',#223341); +#223341 = AXIS2_PLACEMENT_3D('',#223342,#223343,#223344); +#223342 = CARTESIAN_POINT('',(139.025279,-90.866665,1.51)); +#223343 = DIRECTION('',(-0.708429080982,0.705782004035,0.)); +#223344 = DIRECTION('',(0.705782004035,0.708429080982,0.)); +#223345 = ADVANCED_FACE('',(#223346),#223371,.T.); +#223346 = FACE_BOUND('',#223347,.T.); +#223347 = EDGE_LOOP('',(#223348,#223349,#223357,#223365)); +#223348 = ORIENTED_EDGE('',*,*,#223327,.T.); +#223349 = ORIENTED_EDGE('',*,*,#223350,.T.); +#223350 = EDGE_CURVE('',#223320,#223351,#223353,.T.); +#223351 = VERTEX_POINT('',#223352); +#223352 = CARTESIAN_POINT('',(140.102567,-89.739158,1.545)); +#223353 = LINE('',#223354,#223355); +#223354 = CARTESIAN_POINT('',(140.112317,-89.77555,1.545)); +#223355 = VECTOR('',#223356,1.); +#223356 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#223357 = ORIENTED_EDGE('',*,*,#223358,.F.); +#223358 = EDGE_CURVE('',#223359,#223351,#223361,.T.); +#223359 = VERTEX_POINT('',#223360); +#223360 = CARTESIAN_POINT('',(140.102567,-89.739158,1.51)); +#223361 = LINE('',#223362,#223363); +#223362 = CARTESIAN_POINT('',(140.102567,-89.739158,1.51)); +#223363 = VECTOR('',#223364,1.); +#223364 = DIRECTION('',(0.,0.,1.)); +#223365 = ORIENTED_EDGE('',*,*,#223366,.F.); +#223366 = EDGE_CURVE('',#223328,#223359,#223367,.T.); +#223367 = LINE('',#223368,#223369); +#223368 = CARTESIAN_POINT('',(140.112317,-89.77555,1.51)); +#223369 = VECTOR('',#223370,1.); +#223370 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#223371 = PLANE('',#223372); +#223372 = AXIS2_PLACEMENT_3D('',#223373,#223374,#223375); +#223373 = CARTESIAN_POINT('',(140.112317,-89.77555,1.51)); +#223374 = DIRECTION('',(-0.965933835092,-0.258789153994,0.)); +#223375 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#223376 = ADVANCED_FACE('',(#223377),#223404,.T.); +#223377 = FACE_BOUND('',#223378,.T.); +#223378 = EDGE_LOOP('',(#223379,#223380,#223389,#223397)); +#223379 = ORIENTED_EDGE('',*,*,#223358,.T.); +#223380 = ORIENTED_EDGE('',*,*,#223381,.T.); +#223381 = EDGE_CURVE('',#223351,#223382,#223384,.T.); +#223382 = VERTEX_POINT('',#223383); +#223383 = CARTESIAN_POINT('',(140.360842,-89.997433,1.545)); +#223384 = CIRCLE('',#223385,0.300000634557); +#223385 = AXIS2_PLACEMENT_3D('',#223386,#223387,#223388); +#223386 = CARTESIAN_POINT('',(140.40000095409,-89.6999990459,1.545)); +#223387 = DIRECTION('',(0.,0.,-1.)); +#223388 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#223389 = ORIENTED_EDGE('',*,*,#223390,.F.); +#223390 = EDGE_CURVE('',#223391,#223382,#223393,.T.); +#223391 = VERTEX_POINT('',#223392); +#223392 = CARTESIAN_POINT('',(140.360842,-89.997433,1.51)); +#223393 = LINE('',#223394,#223395); +#223394 = CARTESIAN_POINT('',(140.360842,-89.997433,1.51)); +#223395 = VECTOR('',#223396,1.); +#223396 = DIRECTION('',(0.,0.,1.)); +#223397 = ORIENTED_EDGE('',*,*,#223398,.F.); +#223398 = EDGE_CURVE('',#223359,#223391,#223399,.T.); +#223399 = CIRCLE('',#223400,0.300000634557); +#223400 = AXIS2_PLACEMENT_3D('',#223401,#223402,#223403); +#223401 = CARTESIAN_POINT('',(140.40000095409,-89.6999990459,1.51)); +#223402 = DIRECTION('',(0.,0.,-1.)); +#223403 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#223404 = CYLINDRICAL_SURFACE('',#223405,0.300000634557); +#223405 = AXIS2_PLACEMENT_3D('',#223406,#223407,#223408); +#223406 = CARTESIAN_POINT('',(140.40000095409,-89.6999990459,1.51)); +#223407 = DIRECTION('',(0.,0.,-1.)); +#223408 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#223409 = ADVANCED_FACE('',(#223410),#223426,.T.); +#223410 = FACE_BOUND('',#223411,.T.); +#223411 = EDGE_LOOP('',(#223412,#223413,#223419,#223420)); +#223412 = ORIENTED_EDGE('',*,*,#223390,.T.); +#223413 = ORIENTED_EDGE('',*,*,#223414,.T.); +#223414 = EDGE_CURVE('',#223382,#222907,#223415,.T.); +#223415 = LINE('',#223416,#223417); +#223416 = CARTESIAN_POINT('',(140.360842,-89.997433,1.545)); +#223417 = VECTOR('',#223418,1.); +#223418 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#223419 = ORIENTED_EDGE('',*,*,#222904,.F.); +#223420 = ORIENTED_EDGE('',*,*,#223421,.F.); +#223421 = EDGE_CURVE('',#223391,#222905,#223422,.T.); +#223422 = LINE('',#223423,#223424); +#223423 = CARTESIAN_POINT('',(140.360842,-89.997433,1.51)); +#223424 = VECTOR('',#223425,1.); +#223425 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#223426 = PLANE('',#223427); +#223427 = AXIS2_PLACEMENT_3D('',#223428,#223429,#223430); +#223428 = CARTESIAN_POINT('',(140.360842,-89.997433,1.51)); +#223429 = DIRECTION('',(-0.25880728333,-0.96592897777,0.)); +#223430 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#223431 = ADVANCED_FACE('',(#223432),#223459,.F.); +#223432 = FACE_BOUND('',#223433,.T.); +#223433 = EDGE_LOOP('',(#223434,#223444,#223451,#223452)); +#223434 = ORIENTED_EDGE('',*,*,#223435,.T.); +#223435 = EDGE_CURVE('',#223436,#223438,#223440,.T.); +#223436 = VERTEX_POINT('',#223437); +#223437 = CARTESIAN_POINT('',(144.237255,-116.8,1.51)); +#223438 = VERTEX_POINT('',#223439); +#223439 = CARTESIAN_POINT('',(144.237255,-116.8,1.545)); +#223440 = LINE('',#223441,#223442); +#223441 = CARTESIAN_POINT('',(144.237255,-116.8,1.51)); +#223442 = VECTOR('',#223443,1.); +#223443 = DIRECTION('',(0.,0.,1.)); +#223444 = ORIENTED_EDGE('',*,*,#223445,.T.); +#223445 = EDGE_CURVE('',#223438,#223438,#223446,.T.); +#223446 = CIRCLE('',#223447,0.137255); +#223447 = AXIS2_PLACEMENT_3D('',#223448,#223449,#223450); +#223448 = CARTESIAN_POINT('',(144.1,-116.8,1.545)); +#223449 = DIRECTION('',(0.,0.,1.)); +#223450 = DIRECTION('',(1.,0.,-0.)); +#223451 = ORIENTED_EDGE('',*,*,#223435,.F.); +#223452 = ORIENTED_EDGE('',*,*,#223453,.F.); +#223453 = EDGE_CURVE('',#223436,#223436,#223454,.T.); +#223454 = CIRCLE('',#223455,0.137255); +#223455 = AXIS2_PLACEMENT_3D('',#223456,#223457,#223458); +#223456 = CARTESIAN_POINT('',(144.1,-116.8,1.51)); +#223457 = DIRECTION('',(0.,0.,1.)); +#223458 = DIRECTION('',(1.,0.,-0.)); +#223459 = CYLINDRICAL_SURFACE('',#223460,0.137255); +#223460 = AXIS2_PLACEMENT_3D('',#223461,#223462,#223463); +#223461 = CARTESIAN_POINT('',(144.1,-116.8,1.51)); +#223462 = DIRECTION('',(-0.,-0.,-1.)); +#223463 = DIRECTION('',(1.,0.,-0.)); +#223464 = ADVANCED_FACE('',(#223465),#223492,.F.); +#223465 = FACE_BOUND('',#223466,.T.); +#223466 = EDGE_LOOP('',(#223467,#223477,#223484,#223485)); +#223467 = ORIENTED_EDGE('',*,*,#223468,.T.); +#223468 = EDGE_CURVE('',#223469,#223471,#223473,.T.); +#223469 = VERTEX_POINT('',#223470); +#223470 = CARTESIAN_POINT('',(140.537255,-89.7,1.51)); +#223471 = VERTEX_POINT('',#223472); +#223472 = CARTESIAN_POINT('',(140.537255,-89.7,1.545)); +#223473 = LINE('',#223474,#223475); +#223474 = CARTESIAN_POINT('',(140.537255,-89.7,1.51)); +#223475 = VECTOR('',#223476,1.); +#223476 = DIRECTION('',(0.,0.,1.)); +#223477 = ORIENTED_EDGE('',*,*,#223478,.T.); +#223478 = EDGE_CURVE('',#223471,#223471,#223479,.T.); +#223479 = CIRCLE('',#223480,0.137255); +#223480 = AXIS2_PLACEMENT_3D('',#223481,#223482,#223483); +#223481 = CARTESIAN_POINT('',(140.4,-89.7,1.545)); +#223482 = DIRECTION('',(0.,0.,1.)); +#223483 = DIRECTION('',(1.,0.,-0.)); +#223484 = ORIENTED_EDGE('',*,*,#223468,.F.); +#223485 = ORIENTED_EDGE('',*,*,#223486,.F.); +#223486 = EDGE_CURVE('',#223469,#223469,#223487,.T.); +#223487 = CIRCLE('',#223488,0.137255); +#223488 = AXIS2_PLACEMENT_3D('',#223489,#223490,#223491); +#223489 = CARTESIAN_POINT('',(140.4,-89.7,1.51)); +#223490 = DIRECTION('',(0.,0.,1.)); +#223491 = DIRECTION('',(1.,0.,-0.)); +#223492 = CYLINDRICAL_SURFACE('',#223493,0.137255); +#223493 = AXIS2_PLACEMENT_3D('',#223494,#223495,#223496); +#223494 = CARTESIAN_POINT('',(140.4,-89.7,1.51)); +#223495 = DIRECTION('',(-0.,-0.,-1.)); +#223496 = DIRECTION('',(1.,0.,-0.)); +#223497 = ADVANCED_FACE('',(#223498,#223517,#223520),#223523,.F.); +#223498 = FACE_BOUND('',#223499,.T.); +#223499 = EDGE_LOOP('',(#223500,#223501,#223502,#223503,#223504,#223505, + #223506,#223507,#223508,#223509,#223510,#223511,#223512,#223513, + #223514,#223515,#223516)); +#223500 = ORIENTED_EDGE('',*,*,#222930,.T.); +#223501 = ORIENTED_EDGE('',*,*,#222961,.T.); +#223502 = ORIENTED_EDGE('',*,*,#222992,.T.); +#223503 = ORIENTED_EDGE('',*,*,#223023,.T.); +#223504 = ORIENTED_EDGE('',*,*,#223054,.T.); +#223505 = ORIENTED_EDGE('',*,*,#223086,.T.); +#223506 = ORIENTED_EDGE('',*,*,#223118,.T.); +#223507 = ORIENTED_EDGE('',*,*,#223149,.T.); +#223508 = ORIENTED_EDGE('',*,*,#223180,.T.); +#223509 = ORIENTED_EDGE('',*,*,#223211,.T.); +#223510 = ORIENTED_EDGE('',*,*,#223242,.T.); +#223511 = ORIENTED_EDGE('',*,*,#223273,.T.); +#223512 = ORIENTED_EDGE('',*,*,#223304,.T.); +#223513 = ORIENTED_EDGE('',*,*,#223335,.T.); +#223514 = ORIENTED_EDGE('',*,*,#223366,.T.); +#223515 = ORIENTED_EDGE('',*,*,#223398,.T.); +#223516 = ORIENTED_EDGE('',*,*,#223421,.T.); +#223517 = FACE_BOUND('',#223518,.T.); +#223518 = EDGE_LOOP('',(#223519)); +#223519 = ORIENTED_EDGE('',*,*,#223453,.T.); +#223520 = FACE_BOUND('',#223521,.T.); +#223521 = EDGE_LOOP('',(#223522)); +#223522 = ORIENTED_EDGE('',*,*,#223486,.T.); +#223523 = PLANE('',#223524); +#223524 = AXIS2_PLACEMENT_3D('',#223525,#223526,#223527); +#223525 = CARTESIAN_POINT('',(0.,0.,1.51)); +#223526 = DIRECTION('',(0.,0.,1.)); +#223527 = DIRECTION('',(1.,0.,-0.)); +#223528 = ADVANCED_FACE('',(#223529,#223548,#223551),#223554,.T.); +#223529 = FACE_BOUND('',#223530,.F.); +#223530 = EDGE_LOOP('',(#223531,#223532,#223533,#223534,#223535,#223536, + #223537,#223538,#223539,#223540,#223541,#223542,#223543,#223544, + #223545,#223546,#223547)); +#223531 = ORIENTED_EDGE('',*,*,#222914,.T.); +#223532 = ORIENTED_EDGE('',*,*,#222945,.T.); +#223533 = ORIENTED_EDGE('',*,*,#222976,.T.); +#223534 = ORIENTED_EDGE('',*,*,#223007,.T.); +#223535 = ORIENTED_EDGE('',*,*,#223038,.T.); +#223536 = ORIENTED_EDGE('',*,*,#223069,.T.); +#223537 = ORIENTED_EDGE('',*,*,#223102,.T.); +#223538 = ORIENTED_EDGE('',*,*,#223133,.T.); +#223539 = ORIENTED_EDGE('',*,*,#223164,.T.); +#223540 = ORIENTED_EDGE('',*,*,#223195,.T.); +#223541 = ORIENTED_EDGE('',*,*,#223226,.T.); +#223542 = ORIENTED_EDGE('',*,*,#223257,.T.); +#223543 = ORIENTED_EDGE('',*,*,#223288,.T.); +#223544 = ORIENTED_EDGE('',*,*,#223319,.T.); +#223545 = ORIENTED_EDGE('',*,*,#223350,.T.); +#223546 = ORIENTED_EDGE('',*,*,#223381,.T.); +#223547 = ORIENTED_EDGE('',*,*,#223414,.T.); +#223548 = FACE_BOUND('',#223549,.F.); +#223549 = EDGE_LOOP('',(#223550)); +#223550 = ORIENTED_EDGE('',*,*,#223445,.T.); +#223551 = FACE_BOUND('',#223552,.F.); +#223552 = EDGE_LOOP('',(#223553)); +#223553 = ORIENTED_EDGE('',*,*,#223478,.T.); +#223554 = PLANE('',#223555); +#223555 = AXIS2_PLACEMENT_3D('',#223556,#223557,#223558); +#223556 = CARTESIAN_POINT('',(0.,0.,1.545)); +#223557 = DIRECTION('',(0.,0.,1.)); +#223558 = DIRECTION('',(1.,0.,-0.)); +#223559 = MANIFOLD_SOLID_BREP('',#223560); +#223560 = CLOSED_SHELL('',(#223561,#223603,#223634,#223665,#223696, + #223727,#223760,#223791,#223822,#223844,#223877,#223897)); +#223561 = ADVANCED_FACE('',(#223562),#223598,.T.); +#223562 = FACE_BOUND('',#223563,.T.); +#223563 = EDGE_LOOP('',(#223564,#223574,#223583,#223591)); +#223564 = ORIENTED_EDGE('',*,*,#223565,.T.); +#223565 = EDGE_CURVE('',#223566,#223568,#223570,.T.); +#223566 = VERTEX_POINT('',#223567); +#223567 = CARTESIAN_POINT('',(146.666665,-69.605279,1.51)); +#223568 = VERTEX_POINT('',#223569); +#223569 = CARTESIAN_POINT('',(146.666665,-69.605279,1.545)); +#223570 = LINE('',#223571,#223572); +#223571 = CARTESIAN_POINT('',(146.666665,-69.605279,1.51)); +#223572 = VECTOR('',#223573,1.); +#223573 = DIRECTION('',(0.,0.,1.)); +#223574 = ORIENTED_EDGE('',*,*,#223575,.T.); +#223575 = EDGE_CURVE('',#223568,#223576,#223578,.T.); +#223576 = VERTEX_POINT('',#223577); +#223577 = CARTESIAN_POINT('',(146.874721,-69.813335,1.545)); +#223578 = CIRCLE('',#223579,0.150000166887); +#223579 = AXIS2_PLACEMENT_3D('',#223580,#223581,#223582); +#223580 = CARTESIAN_POINT('',(146.75,-69.73,1.545)); +#223581 = DIRECTION('',(0.,0.,-1.)); +#223582 = DIRECTION('',(-0.555566048557,0.831472408256,0.)); +#223583 = ORIENTED_EDGE('',*,*,#223584,.F.); +#223584 = EDGE_CURVE('',#223585,#223576,#223587,.T.); +#223585 = VERTEX_POINT('',#223586); +#223586 = CARTESIAN_POINT('',(146.874721,-69.813335,1.51)); +#223587 = LINE('',#223588,#223589); +#223588 = CARTESIAN_POINT('',(146.874721,-69.813335,1.51)); +#223589 = VECTOR('',#223590,1.); +#223590 = DIRECTION('',(0.,0.,1.)); +#223591 = ORIENTED_EDGE('',*,*,#223592,.F.); +#223592 = EDGE_CURVE('',#223566,#223585,#223593,.T.); +#223593 = CIRCLE('',#223594,0.150000166887); +#223594 = AXIS2_PLACEMENT_3D('',#223595,#223596,#223597); +#223595 = CARTESIAN_POINT('',(146.75,-69.73,1.51)); +#223596 = DIRECTION('',(0.,0.,-1.)); +#223597 = DIRECTION('',(-0.555566048557,0.831472408256,0.)); +#223598 = CYLINDRICAL_SURFACE('',#223599,0.150000166887); +#223599 = AXIS2_PLACEMENT_3D('',#223600,#223601,#223602); +#223600 = CARTESIAN_POINT('',(146.75,-69.73,1.51)); +#223601 = DIRECTION('',(0.,0.,-1.)); +#223602 = DIRECTION('',(-0.555566048557,0.831472408256,0.)); +#223603 = ADVANCED_FACE('',(#223604),#223629,.T.); +#223604 = FACE_BOUND('',#223605,.T.); +#223605 = EDGE_LOOP('',(#223606,#223607,#223615,#223623)); +#223606 = ORIENTED_EDGE('',*,*,#223584,.T.); +#223607 = ORIENTED_EDGE('',*,*,#223608,.T.); +#223608 = EDGE_CURVE('',#223576,#223609,#223611,.T.); +#223609 = VERTEX_POINT('',#223610); +#223610 = CARTESIAN_POINT('',(146.463335,-70.224721,1.545)); +#223611 = LINE('',#223612,#223613); +#223612 = CARTESIAN_POINT('',(146.874721,-69.813335,1.545)); +#223613 = VECTOR('',#223614,1.); +#223614 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223615 = ORIENTED_EDGE('',*,*,#223616,.F.); +#223616 = EDGE_CURVE('',#223617,#223609,#223619,.T.); +#223617 = VERTEX_POINT('',#223618); +#223618 = CARTESIAN_POINT('',(146.463335,-70.224721,1.51)); +#223619 = LINE('',#223620,#223621); +#223620 = CARTESIAN_POINT('',(146.463335,-70.224721,1.51)); +#223621 = VECTOR('',#223622,1.); +#223622 = DIRECTION('',(0.,0.,1.)); +#223623 = ORIENTED_EDGE('',*,*,#223624,.F.); +#223624 = EDGE_CURVE('',#223585,#223617,#223625,.T.); +#223625 = LINE('',#223626,#223627); +#223626 = CARTESIAN_POINT('',(146.874721,-69.813335,1.51)); +#223627 = VECTOR('',#223628,1.); +#223628 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223629 = PLANE('',#223630); +#223630 = AXIS2_PLACEMENT_3D('',#223631,#223632,#223633); +#223631 = CARTESIAN_POINT('',(146.874721,-69.813335,1.51)); +#223632 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#223633 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#223634 = ADVANCED_FACE('',(#223635),#223660,.T.); +#223635 = FACE_BOUND('',#223636,.T.); +#223636 = EDGE_LOOP('',(#223637,#223638,#223646,#223654)); +#223637 = ORIENTED_EDGE('',*,*,#223616,.T.); +#223638 = ORIENTED_EDGE('',*,*,#223639,.T.); +#223639 = EDGE_CURVE('',#223609,#223640,#223642,.T.); +#223640 = VERTEX_POINT('',#223641); +#223641 = CARTESIAN_POINT('',(146.409264,-70.247118,1.545)); +#223642 = LINE('',#223643,#223644); +#223643 = CARTESIAN_POINT('',(146.463335,-70.224721,1.545)); +#223644 = VECTOR('',#223645,1.); +#223645 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#223646 = ORIENTED_EDGE('',*,*,#223647,.F.); +#223647 = EDGE_CURVE('',#223648,#223640,#223650,.T.); +#223648 = VERTEX_POINT('',#223649); +#223649 = CARTESIAN_POINT('',(146.409264,-70.247118,1.51)); +#223650 = LINE('',#223651,#223652); +#223651 = CARTESIAN_POINT('',(146.409264,-70.247118,1.51)); +#223652 = VECTOR('',#223653,1.); +#223653 = DIRECTION('',(0.,0.,1.)); +#223654 = ORIENTED_EDGE('',*,*,#223655,.F.); +#223655 = EDGE_CURVE('',#223617,#223648,#223656,.T.); +#223656 = LINE('',#223657,#223658); +#223657 = CARTESIAN_POINT('',(146.463335,-70.224721,1.51)); +#223658 = VECTOR('',#223659,1.); +#223659 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#223660 = PLANE('',#223661); +#223661 = AXIS2_PLACEMENT_3D('',#223662,#223663,#223664); +#223662 = CARTESIAN_POINT('',(146.463335,-70.224721,1.51)); +#223663 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#223664 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#223665 = ADVANCED_FACE('',(#223666),#223691,.T.); +#223666 = FACE_BOUND('',#223667,.T.); +#223667 = EDGE_LOOP('',(#223668,#223669,#223677,#223685)); +#223668 = ORIENTED_EDGE('',*,*,#223647,.T.); +#223669 = ORIENTED_EDGE('',*,*,#223670,.T.); +#223670 = EDGE_CURVE('',#223640,#223671,#223673,.T.); +#223671 = VERTEX_POINT('',#223672); +#223672 = CARTESIAN_POINT('',(145.056844,-70.25,1.545)); +#223673 = LINE('',#223674,#223675); +#223674 = CARTESIAN_POINT('',(146.409264,-70.247118,1.545)); +#223675 = VECTOR('',#223676,1.); +#223676 = DIRECTION('',(-0.999997729438,-2.130989970749E-03,0.)); +#223677 = ORIENTED_EDGE('',*,*,#223678,.F.); +#223678 = EDGE_CURVE('',#223679,#223671,#223681,.T.); +#223679 = VERTEX_POINT('',#223680); +#223680 = CARTESIAN_POINT('',(145.056844,-70.25,1.51)); +#223681 = LINE('',#223682,#223683); +#223682 = CARTESIAN_POINT('',(145.056844,-70.25,1.51)); +#223683 = VECTOR('',#223684,1.); +#223684 = DIRECTION('',(0.,0.,1.)); +#223685 = ORIENTED_EDGE('',*,*,#223686,.F.); +#223686 = EDGE_CURVE('',#223648,#223679,#223687,.T.); +#223687 = LINE('',#223688,#223689); +#223688 = CARTESIAN_POINT('',(146.409264,-70.247118,1.51)); +#223689 = VECTOR('',#223690,1.); +#223690 = DIRECTION('',(-0.999997729438,-2.130989970749E-03,0.)); +#223691 = PLANE('',#223692); +#223692 = AXIS2_PLACEMENT_3D('',#223693,#223694,#223695); +#223693 = CARTESIAN_POINT('',(146.409264,-70.247118,1.51)); +#223694 = DIRECTION('',(2.130989970749E-03,-0.999997729438,0.)); +#223695 = DIRECTION('',(-0.999997729438,-2.130989970749E-03,0.)); +#223696 = ADVANCED_FACE('',(#223697),#223722,.T.); +#223697 = FACE_BOUND('',#223698,.T.); +#223698 = EDGE_LOOP('',(#223699,#223700,#223708,#223716)); +#223699 = ORIENTED_EDGE('',*,*,#223678,.T.); +#223700 = ORIENTED_EDGE('',*,*,#223701,.T.); +#223701 = EDGE_CURVE('',#223671,#223702,#223704,.T.); +#223702 = VERTEX_POINT('',#223703); +#223703 = CARTESIAN_POINT('',(145.038006,-70.282628,1.545)); +#223704 = LINE('',#223705,#223706); +#223705 = CARTESIAN_POINT('',(145.056844,-70.25,1.545)); +#223706 = VECTOR('',#223707,1.); +#223707 = DIRECTION('',(-0.500004288243,-0.866022927952,0.)); +#223708 = ORIENTED_EDGE('',*,*,#223709,.F.); +#223709 = EDGE_CURVE('',#223710,#223702,#223712,.T.); +#223710 = VERTEX_POINT('',#223711); +#223711 = CARTESIAN_POINT('',(145.038006,-70.282628,1.51)); +#223712 = LINE('',#223713,#223714); +#223713 = CARTESIAN_POINT('',(145.038006,-70.282628,1.51)); +#223714 = VECTOR('',#223715,1.); +#223715 = DIRECTION('',(0.,0.,1.)); +#223716 = ORIENTED_EDGE('',*,*,#223717,.F.); +#223717 = EDGE_CURVE('',#223679,#223710,#223718,.T.); +#223718 = LINE('',#223719,#223720); +#223719 = CARTESIAN_POINT('',(145.056844,-70.25,1.51)); +#223720 = VECTOR('',#223721,1.); +#223721 = DIRECTION('',(-0.500004288243,-0.866022927952,0.)); +#223722 = PLANE('',#223723); +#223723 = AXIS2_PLACEMENT_3D('',#223724,#223725,#223726); +#223724 = CARTESIAN_POINT('',(145.056844,-70.25,1.51)); +#223725 = DIRECTION('',(0.866022927952,-0.500004288243,0.)); +#223726 = DIRECTION('',(-0.500004288243,-0.866022927952,0.)); +#223727 = ADVANCED_FACE('',(#223728),#223755,.T.); +#223728 = FACE_BOUND('',#223729,.T.); +#223729 = EDGE_LOOP('',(#223730,#223731,#223740,#223748)); +#223730 = ORIENTED_EDGE('',*,*,#223709,.T.); +#223731 = ORIENTED_EDGE('',*,*,#223732,.T.); +#223732 = EDGE_CURVE('',#223702,#223733,#223735,.T.); +#223733 = VERTEX_POINT('',#223734); +#223734 = CARTESIAN_POINT('',(145.038006,-69.917372,1.545)); +#223735 = CIRCLE('',#223736,0.299999660343); +#223736 = AXIS2_PLACEMENT_3D('',#223737,#223738,#223739); +#223737 = CARTESIAN_POINT('',(144.80000009708,-70.1,1.545)); +#223738 = DIRECTION('',(0.,0.,-1.)); +#223739 = DIRECTION('',(0.793353907941,-0.608760689232,0.)); +#223740 = ORIENTED_EDGE('',*,*,#223741,.F.); +#223741 = EDGE_CURVE('',#223742,#223733,#223744,.T.); +#223742 = VERTEX_POINT('',#223743); +#223743 = CARTESIAN_POINT('',(145.038006,-69.917372,1.51)); +#223744 = LINE('',#223745,#223746); +#223745 = CARTESIAN_POINT('',(145.038006,-69.917372,1.51)); +#223746 = VECTOR('',#223747,1.); +#223747 = DIRECTION('',(0.,0.,1.)); +#223748 = ORIENTED_EDGE('',*,*,#223749,.F.); +#223749 = EDGE_CURVE('',#223710,#223742,#223750,.T.); +#223750 = CIRCLE('',#223751,0.299999660343); +#223751 = AXIS2_PLACEMENT_3D('',#223752,#223753,#223754); +#223752 = CARTESIAN_POINT('',(144.80000009708,-70.1,1.51)); +#223753 = DIRECTION('',(0.,0.,-1.)); +#223754 = DIRECTION('',(0.793353907941,-0.608760689232,0.)); +#223755 = CYLINDRICAL_SURFACE('',#223756,0.299999660343); +#223756 = AXIS2_PLACEMENT_3D('',#223757,#223758,#223759); +#223757 = CARTESIAN_POINT('',(144.80000009708,-70.1,1.51)); +#223758 = DIRECTION('',(0.,0.,-1.)); +#223759 = DIRECTION('',(0.793353907941,-0.608760689232,0.)); +#223760 = ADVANCED_FACE('',(#223761),#223786,.T.); +#223761 = FACE_BOUND('',#223762,.T.); +#223762 = EDGE_LOOP('',(#223763,#223764,#223772,#223780)); +#223763 = ORIENTED_EDGE('',*,*,#223741,.T.); +#223764 = ORIENTED_EDGE('',*,*,#223765,.T.); +#223765 = EDGE_CURVE('',#223733,#223766,#223768,.T.); +#223766 = VERTEX_POINT('',#223767); +#223767 = CARTESIAN_POINT('',(145.056844,-69.95,1.545)); +#223768 = LINE('',#223769,#223770); +#223769 = CARTESIAN_POINT('',(145.038006,-69.917372,1.545)); +#223770 = VECTOR('',#223771,1.); +#223771 = DIRECTION('',(0.500004288243,-0.866022927952,0.)); +#223772 = ORIENTED_EDGE('',*,*,#223773,.F.); +#223773 = EDGE_CURVE('',#223774,#223766,#223776,.T.); +#223774 = VERTEX_POINT('',#223775); +#223775 = CARTESIAN_POINT('',(145.056844,-69.95,1.51)); +#223776 = LINE('',#223777,#223778); +#223777 = CARTESIAN_POINT('',(145.056844,-69.95,1.51)); +#223778 = VECTOR('',#223779,1.); +#223779 = DIRECTION('',(0.,0.,1.)); +#223780 = ORIENTED_EDGE('',*,*,#223781,.F.); +#223781 = EDGE_CURVE('',#223742,#223774,#223782,.T.); +#223782 = LINE('',#223783,#223784); +#223783 = CARTESIAN_POINT('',(145.038006,-69.917372,1.51)); +#223784 = VECTOR('',#223785,1.); +#223785 = DIRECTION('',(0.500004288243,-0.866022927952,0.)); +#223786 = PLANE('',#223787); +#223787 = AXIS2_PLACEMENT_3D('',#223788,#223789,#223790); +#223788 = CARTESIAN_POINT('',(145.038006,-69.917372,1.51)); +#223789 = DIRECTION('',(0.866022927952,0.500004288243,-0.)); +#223790 = DIRECTION('',(0.500004288243,-0.866022927952,0.)); +#223791 = ADVANCED_FACE('',(#223792),#223817,.T.); +#223792 = FACE_BOUND('',#223793,.T.); +#223793 = EDGE_LOOP('',(#223794,#223795,#223803,#223811)); +#223794 = ORIENTED_EDGE('',*,*,#223773,.T.); +#223795 = ORIENTED_EDGE('',*,*,#223796,.T.); +#223796 = EDGE_CURVE('',#223766,#223797,#223799,.T.); +#223797 = VERTEX_POINT('',#223798); +#223798 = CARTESIAN_POINT('',(146.317868,-69.95,1.545)); +#223799 = LINE('',#223800,#223801); +#223800 = CARTESIAN_POINT('',(145.056844,-69.95,1.545)); +#223801 = VECTOR('',#223802,1.); +#223802 = DIRECTION('',(1.,0.,0.)); +#223803 = ORIENTED_EDGE('',*,*,#223804,.F.); +#223804 = EDGE_CURVE('',#223805,#223797,#223807,.T.); +#223805 = VERTEX_POINT('',#223806); +#223806 = CARTESIAN_POINT('',(146.317868,-69.95,1.51)); +#223807 = LINE('',#223808,#223809); +#223808 = CARTESIAN_POINT('',(146.317868,-69.95,1.51)); +#223809 = VECTOR('',#223810,1.); +#223810 = DIRECTION('',(0.,0.,1.)); +#223811 = ORIENTED_EDGE('',*,*,#223812,.F.); +#223812 = EDGE_CURVE('',#223774,#223805,#223813,.T.); +#223813 = LINE('',#223814,#223815); +#223814 = CARTESIAN_POINT('',(145.056844,-69.95,1.51)); +#223815 = VECTOR('',#223816,1.); +#223816 = DIRECTION('',(1.,0.,0.)); +#223817 = PLANE('',#223818); +#223818 = AXIS2_PLACEMENT_3D('',#223819,#223820,#223821); +#223819 = CARTESIAN_POINT('',(145.056844,-69.95,1.51)); +#223820 = DIRECTION('',(0.,1.,0.)); +#223821 = DIRECTION('',(1.,0.,0.)); +#223822 = ADVANCED_FACE('',(#223823),#223839,.T.); +#223823 = FACE_BOUND('',#223824,.T.); +#223824 = EDGE_LOOP('',(#223825,#223826,#223832,#223833)); +#223825 = ORIENTED_EDGE('',*,*,#223804,.T.); +#223826 = ORIENTED_EDGE('',*,*,#223827,.T.); +#223827 = EDGE_CURVE('',#223797,#223568,#223828,.T.); +#223828 = LINE('',#223829,#223830); +#223829 = CARTESIAN_POINT('',(146.317868,-69.95,1.545)); +#223830 = VECTOR('',#223831,1.); +#223831 = DIRECTION('',(0.711250362217,0.702938775603,0.)); +#223832 = ORIENTED_EDGE('',*,*,#223565,.F.); +#223833 = ORIENTED_EDGE('',*,*,#223834,.F.); +#223834 = EDGE_CURVE('',#223805,#223566,#223835,.T.); +#223835 = LINE('',#223836,#223837); +#223836 = CARTESIAN_POINT('',(146.317868,-69.95,1.51)); +#223837 = VECTOR('',#223838,1.); +#223838 = DIRECTION('',(0.711250362217,0.702938775603,0.)); +#223839 = PLANE('',#223840); +#223840 = AXIS2_PLACEMENT_3D('',#223841,#223842,#223843); +#223841 = CARTESIAN_POINT('',(146.317868,-69.95,1.51)); +#223842 = DIRECTION('',(-0.702938775603,0.711250362217,0.)); +#223843 = DIRECTION('',(0.711250362217,0.702938775603,0.)); +#223844 = ADVANCED_FACE('',(#223845),#223872,.F.); +#223845 = FACE_BOUND('',#223846,.T.); +#223846 = EDGE_LOOP('',(#223847,#223857,#223864,#223865)); +#223847 = ORIENTED_EDGE('',*,*,#223848,.T.); +#223848 = EDGE_CURVE('',#223849,#223851,#223853,.T.); +#223849 = VERTEX_POINT('',#223850); +#223850 = CARTESIAN_POINT('',(144.937255,-70.1,1.51)); +#223851 = VERTEX_POINT('',#223852); +#223852 = CARTESIAN_POINT('',(144.937255,-70.1,1.545)); +#223853 = LINE('',#223854,#223855); +#223854 = CARTESIAN_POINT('',(144.937255,-70.1,1.51)); +#223855 = VECTOR('',#223856,1.); +#223856 = DIRECTION('',(0.,0.,1.)); +#223857 = ORIENTED_EDGE('',*,*,#223858,.T.); +#223858 = EDGE_CURVE('',#223851,#223851,#223859,.T.); +#223859 = CIRCLE('',#223860,0.137255); +#223860 = AXIS2_PLACEMENT_3D('',#223861,#223862,#223863); +#223861 = CARTESIAN_POINT('',(144.8,-70.1,1.545)); +#223862 = DIRECTION('',(0.,0.,1.)); +#223863 = DIRECTION('',(1.,0.,-0.)); +#223864 = ORIENTED_EDGE('',*,*,#223848,.F.); +#223865 = ORIENTED_EDGE('',*,*,#223866,.F.); +#223866 = EDGE_CURVE('',#223849,#223849,#223867,.T.); +#223867 = CIRCLE('',#223868,0.137255); +#223868 = AXIS2_PLACEMENT_3D('',#223869,#223870,#223871); +#223869 = CARTESIAN_POINT('',(144.8,-70.1,1.51)); +#223870 = DIRECTION('',(0.,0.,1.)); +#223871 = DIRECTION('',(1.,0.,-0.)); +#223872 = CYLINDRICAL_SURFACE('',#223873,0.137255); +#223873 = AXIS2_PLACEMENT_3D('',#223874,#223875,#223876); +#223874 = CARTESIAN_POINT('',(144.8,-70.1,1.51)); +#223875 = DIRECTION('',(-0.,-0.,-1.)); +#223876 = DIRECTION('',(1.,0.,-0.)); +#223877 = ADVANCED_FACE('',(#223878,#223889),#223892,.F.); +#223878 = FACE_BOUND('',#223879,.T.); +#223879 = EDGE_LOOP('',(#223880,#223881,#223882,#223883,#223884,#223885, + #223886,#223887,#223888)); +#223880 = ORIENTED_EDGE('',*,*,#223592,.T.); +#223881 = ORIENTED_EDGE('',*,*,#223624,.T.); +#223882 = ORIENTED_EDGE('',*,*,#223655,.T.); +#223883 = ORIENTED_EDGE('',*,*,#223686,.T.); +#223884 = ORIENTED_EDGE('',*,*,#223717,.T.); +#223885 = ORIENTED_EDGE('',*,*,#223749,.T.); +#223886 = ORIENTED_EDGE('',*,*,#223781,.T.); +#223887 = ORIENTED_EDGE('',*,*,#223812,.T.); +#223888 = ORIENTED_EDGE('',*,*,#223834,.T.); +#223889 = FACE_BOUND('',#223890,.T.); +#223890 = EDGE_LOOP('',(#223891)); +#223891 = ORIENTED_EDGE('',*,*,#223866,.T.); +#223892 = PLANE('',#223893); +#223893 = AXIS2_PLACEMENT_3D('',#223894,#223895,#223896); +#223894 = CARTESIAN_POINT('',(0.,0.,1.51)); +#223895 = DIRECTION('',(0.,0.,1.)); +#223896 = DIRECTION('',(1.,0.,-0.)); +#223897 = ADVANCED_FACE('',(#223898,#223909),#223912,.T.); +#223898 = FACE_BOUND('',#223899,.F.); +#223899 = EDGE_LOOP('',(#223900,#223901,#223902,#223903,#223904,#223905, + #223906,#223907,#223908)); +#223900 = ORIENTED_EDGE('',*,*,#223575,.T.); +#223901 = ORIENTED_EDGE('',*,*,#223608,.T.); +#223902 = ORIENTED_EDGE('',*,*,#223639,.T.); +#223903 = ORIENTED_EDGE('',*,*,#223670,.T.); +#223904 = ORIENTED_EDGE('',*,*,#223701,.T.); +#223905 = ORIENTED_EDGE('',*,*,#223732,.T.); +#223906 = ORIENTED_EDGE('',*,*,#223765,.T.); +#223907 = ORIENTED_EDGE('',*,*,#223796,.T.); +#223908 = ORIENTED_EDGE('',*,*,#223827,.T.); +#223909 = FACE_BOUND('',#223910,.F.); +#223910 = EDGE_LOOP('',(#223911)); +#223911 = ORIENTED_EDGE('',*,*,#223858,.T.); +#223912 = PLANE('',#223913); +#223913 = AXIS2_PLACEMENT_3D('',#223914,#223915,#223916); +#223914 = CARTESIAN_POINT('',(0.,0.,1.545)); +#223915 = DIRECTION('',(0.,0.,1.)); +#223916 = DIRECTION('',(1.,0.,-0.)); +#223917 = MANIFOLD_SOLID_BREP('',#223918); +#223918 = CLOSED_SHELL('',(#223919,#223959,#223992,#224023,#224054, + #224087,#224109,#224142,#224159)); +#223919 = ADVANCED_FACE('',(#223920),#223954,.F.); +#223920 = FACE_BOUND('',#223921,.F.); +#223921 = EDGE_LOOP('',(#223922,#223932,#223940,#223948)); +#223922 = ORIENTED_EDGE('',*,*,#223923,.T.); +#223923 = EDGE_CURVE('',#223924,#223926,#223928,.T.); +#223924 = VERTEX_POINT('',#223925); +#223925 = CARTESIAN_POINT('',(144.15,-117.094527,0.)); +#223926 = VERTEX_POINT('',#223927); +#223927 = CARTESIAN_POINT('',(144.15,-117.094527,-3.5E-02)); +#223928 = LINE('',#223929,#223930); +#223929 = CARTESIAN_POINT('',(144.15,-117.094527,0.)); +#223930 = VECTOR('',#223931,1.); +#223931 = DIRECTION('',(0.,0.,-1.)); +#223932 = ORIENTED_EDGE('',*,*,#223933,.T.); +#223933 = EDGE_CURVE('',#223926,#223934,#223936,.T.); +#223934 = VERTEX_POINT('',#223935); +#223935 = CARTESIAN_POINT('',(144.147118,-118.379264,-3.5E-02)); +#223936 = LINE('',#223937,#223938); +#223937 = CARTESIAN_POINT('',(144.15,-117.094527,-3.5E-02)); +#223938 = VECTOR('',#223939,1.); +#223939 = DIRECTION('',(-2.243255038658E-03,-0.9999974839,0.)); +#223940 = ORIENTED_EDGE('',*,*,#223941,.F.); +#223941 = EDGE_CURVE('',#223942,#223934,#223944,.T.); +#223942 = VERTEX_POINT('',#223943); +#223943 = CARTESIAN_POINT('',(144.147118,-118.379264,0.)); +#223944 = LINE('',#223945,#223946); +#223945 = CARTESIAN_POINT('',(144.147118,-118.379264,0.)); +#223946 = VECTOR('',#223947,1.); +#223947 = DIRECTION('',(0.,0.,-1.)); +#223948 = ORIENTED_EDGE('',*,*,#223949,.F.); +#223949 = EDGE_CURVE('',#223924,#223942,#223950,.T.); +#223950 = LINE('',#223951,#223952); +#223951 = CARTESIAN_POINT('',(144.15,-117.094527,0.)); +#223952 = VECTOR('',#223953,1.); +#223953 = DIRECTION('',(-2.243255038658E-03,-0.9999974839,0.)); +#223954 = PLANE('',#223955); +#223955 = AXIS2_PLACEMENT_3D('',#223956,#223957,#223958); +#223956 = CARTESIAN_POINT('',(144.15,-117.094527,0.)); +#223957 = DIRECTION('',(-0.9999974839,2.243255038658E-03,0.)); +#223958 = DIRECTION('',(-2.243255038658E-03,-0.9999974839,0.)); +#223959 = ADVANCED_FACE('',(#223960),#223987,.T.); +#223960 = FACE_BOUND('',#223961,.F.); +#223961 = EDGE_LOOP('',(#223962,#223963,#223972,#223980)); +#223962 = ORIENTED_EDGE('',*,*,#223941,.T.); +#223963 = ORIENTED_EDGE('',*,*,#223964,.T.); +#223964 = EDGE_CURVE('',#223934,#223965,#223967,.T.); +#223965 = VERTEX_POINT('',#223966); +#223966 = CARTESIAN_POINT('',(143.852882,-118.379264,-3.5E-02)); +#223967 = CIRCLE('',#223968,0.150000292066); +#223968 = AXIS2_PLACEMENT_3D('',#223969,#223970,#223971); +#223969 = CARTESIAN_POINT('',(144.,-118.35,-3.5E-02)); +#223970 = DIRECTION('',(-0.,0.,-1.)); +#223971 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#223972 = ORIENTED_EDGE('',*,*,#223973,.F.); +#223973 = EDGE_CURVE('',#223974,#223965,#223976,.T.); +#223974 = VERTEX_POINT('',#223975); +#223975 = CARTESIAN_POINT('',(143.852882,-118.379264,0.)); +#223976 = LINE('',#223977,#223978); +#223977 = CARTESIAN_POINT('',(143.852882,-118.379264,0.)); +#223978 = VECTOR('',#223979,1.); +#223979 = DIRECTION('',(0.,0.,-1.)); +#223980 = ORIENTED_EDGE('',*,*,#223981,.F.); +#223981 = EDGE_CURVE('',#223942,#223974,#223982,.T.); +#223982 = CIRCLE('',#223983,0.150000292066); +#223983 = AXIS2_PLACEMENT_3D('',#223984,#223985,#223986); +#223984 = CARTESIAN_POINT('',(144.,-118.35,0.)); +#223985 = DIRECTION('',(-0.,0.,-1.)); +#223986 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#223987 = CYLINDRICAL_SURFACE('',#223988,0.150000292066); +#223988 = AXIS2_PLACEMENT_3D('',#223989,#223990,#223991); +#223989 = CARTESIAN_POINT('',(144.,-118.35,0.)); +#223990 = DIRECTION('',(0.,-0.,1.)); +#223991 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#223992 = ADVANCED_FACE('',(#223993),#224018,.F.); +#223993 = FACE_BOUND('',#223994,.F.); +#223994 = EDGE_LOOP('',(#223995,#223996,#224004,#224012)); +#223995 = ORIENTED_EDGE('',*,*,#223973,.T.); +#223996 = ORIENTED_EDGE('',*,*,#223997,.T.); +#223997 = EDGE_CURVE('',#223965,#223998,#224000,.T.); +#223998 = VERTEX_POINT('',#223999); +#223999 = CARTESIAN_POINT('',(143.85,-116.961853,-3.5E-02)); +#224000 = LINE('',#224001,#224002); +#224001 = CARTESIAN_POINT('',(143.852882,-118.379264,-3.5E-02)); +#224002 = VECTOR('',#224003,1.); +#224003 = DIRECTION('',(-2.033280426474E-03,0.999997932883,0.)); +#224004 = ORIENTED_EDGE('',*,*,#224005,.F.); +#224005 = EDGE_CURVE('',#224006,#223998,#224008,.T.); +#224006 = VERTEX_POINT('',#224007); +#224007 = CARTESIAN_POINT('',(143.85,-116.961853,0.)); +#224008 = LINE('',#224009,#224010); +#224009 = CARTESIAN_POINT('',(143.85,-116.961853,0.)); +#224010 = VECTOR('',#224011,1.); +#224011 = DIRECTION('',(0.,0.,-1.)); +#224012 = ORIENTED_EDGE('',*,*,#224013,.F.); +#224013 = EDGE_CURVE('',#223974,#224006,#224014,.T.); +#224014 = LINE('',#224015,#224016); +#224015 = CARTESIAN_POINT('',(143.852882,-118.379264,0.)); +#224016 = VECTOR('',#224017,1.); +#224017 = DIRECTION('',(-2.033280426474E-03,0.999997932883,0.)); +#224018 = PLANE('',#224019); +#224019 = AXIS2_PLACEMENT_3D('',#224020,#224021,#224022); +#224020 = CARTESIAN_POINT('',(143.852882,-118.379264,0.)); +#224021 = DIRECTION('',(0.999997932883,2.033280426474E-03,0.)); +#224022 = DIRECTION('',(-2.033280426474E-03,0.999997932883,0.)); +#224023 = ADVANCED_FACE('',(#224024),#224049,.F.); +#224024 = FACE_BOUND('',#224025,.F.); +#224025 = EDGE_LOOP('',(#224026,#224027,#224035,#224043)); +#224026 = ORIENTED_EDGE('',*,*,#224005,.T.); +#224027 = ORIENTED_EDGE('',*,*,#224028,.T.); +#224028 = EDGE_CURVE('',#223998,#224029,#224031,.T.); +#224029 = VERTEX_POINT('',#224030); +#224030 = CARTESIAN_POINT('',(143.822836,-116.914805,-3.5E-02)); +#224031 = LINE('',#224032,#224033); +#224032 = CARTESIAN_POINT('',(143.85,-116.961853,-3.5E-02)); +#224033 = VECTOR('',#224034,1.); +#224034 = DIRECTION('',(-0.500011382954,0.866018831733,0.)); +#224035 = ORIENTED_EDGE('',*,*,#224036,.F.); +#224036 = EDGE_CURVE('',#224037,#224029,#224039,.T.); +#224037 = VERTEX_POINT('',#224038); +#224038 = CARTESIAN_POINT('',(143.822836,-116.914805,0.)); +#224039 = LINE('',#224040,#224041); +#224040 = CARTESIAN_POINT('',(143.822836,-116.914805,0.)); +#224041 = VECTOR('',#224042,1.); +#224042 = DIRECTION('',(0.,0.,-1.)); +#224043 = ORIENTED_EDGE('',*,*,#224044,.F.); +#224044 = EDGE_CURVE('',#224006,#224037,#224045,.T.); +#224045 = LINE('',#224046,#224047); +#224046 = CARTESIAN_POINT('',(143.85,-116.961853,0.)); +#224047 = VECTOR('',#224048,1.); +#224048 = DIRECTION('',(-0.500011382954,0.866018831733,0.)); +#224049 = PLANE('',#224050); +#224050 = AXIS2_PLACEMENT_3D('',#224051,#224052,#224053); +#224051 = CARTESIAN_POINT('',(143.85,-116.961853,0.)); +#224052 = DIRECTION('',(0.866018831733,0.500011382954,0.)); +#224053 = DIRECTION('',(-0.500011382954,0.866018831733,0.)); +#224054 = ADVANCED_FACE('',(#224055),#224082,.T.); +#224055 = FACE_BOUND('',#224056,.F.); +#224056 = EDGE_LOOP('',(#224057,#224058,#224067,#224075)); +#224057 = ORIENTED_EDGE('',*,*,#224036,.T.); +#224058 = ORIENTED_EDGE('',*,*,#224059,.T.); +#224059 = EDGE_CURVE('',#224029,#224060,#224062,.T.); +#224060 = VERTEX_POINT('',#224061); +#224061 = CARTESIAN_POINT('',(144.214805,-117.077164,-3.5E-02)); +#224062 = CIRCLE('',#224063,0.300000118202); +#224063 = AXIS2_PLACEMENT_3D('',#224064,#224065,#224066); +#224064 = CARTESIAN_POINT('',(144.1,-116.8,-3.5E-02)); +#224065 = DIRECTION('',(0.,0.,-1.)); +#224066 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#224067 = ORIENTED_EDGE('',*,*,#224068,.F.); +#224068 = EDGE_CURVE('',#224069,#224060,#224071,.T.); +#224069 = VERTEX_POINT('',#224070); +#224070 = CARTESIAN_POINT('',(144.214805,-117.077164,0.)); +#224071 = LINE('',#224072,#224073); +#224072 = CARTESIAN_POINT('',(144.214805,-117.077164,0.)); +#224073 = VECTOR('',#224074,1.); +#224074 = DIRECTION('',(0.,0.,-1.)); +#224075 = ORIENTED_EDGE('',*,*,#224076,.F.); +#224076 = EDGE_CURVE('',#224037,#224069,#224077,.T.); +#224077 = CIRCLE('',#224078,0.300000118202); +#224078 = AXIS2_PLACEMENT_3D('',#224079,#224080,#224081); +#224079 = CARTESIAN_POINT('',(144.1,-116.8,0.)); +#224080 = DIRECTION('',(0.,0.,-1.)); +#224081 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#224082 = CYLINDRICAL_SURFACE('',#224083,0.300000118202); +#224083 = AXIS2_PLACEMENT_3D('',#224084,#224085,#224086); +#224084 = CARTESIAN_POINT('',(144.1,-116.8,0.)); +#224085 = DIRECTION('',(-0.,-0.,1.)); +#224086 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#224087 = ADVANCED_FACE('',(#224088),#224104,.F.); +#224088 = FACE_BOUND('',#224089,.F.); +#224089 = EDGE_LOOP('',(#224090,#224091,#224097,#224098)); +#224090 = ORIENTED_EDGE('',*,*,#224068,.T.); +#224091 = ORIENTED_EDGE('',*,*,#224092,.T.); +#224092 = EDGE_CURVE('',#224060,#223926,#224093,.T.); +#224093 = LINE('',#224094,#224095); +#224094 = CARTESIAN_POINT('',(144.214805,-117.077164,-3.5E-02)); +#224095 = VECTOR('',#224096,1.); +#224096 = DIRECTION('',(-0.965931219582,-0.25879891622,0.)); +#224097 = ORIENTED_EDGE('',*,*,#223923,.F.); +#224098 = ORIENTED_EDGE('',*,*,#224099,.F.); +#224099 = EDGE_CURVE('',#224069,#223924,#224100,.T.); +#224100 = LINE('',#224101,#224102); +#224101 = CARTESIAN_POINT('',(144.214805,-117.077164,0.)); +#224102 = VECTOR('',#224103,1.); +#224103 = DIRECTION('',(-0.965931219582,-0.25879891622,0.)); +#224104 = PLANE('',#224105); +#224105 = AXIS2_PLACEMENT_3D('',#224106,#224107,#224108); +#224106 = CARTESIAN_POINT('',(144.214805,-117.077164,0.)); +#224107 = DIRECTION('',(-0.25879891622,0.965931219582,0.)); +#224108 = DIRECTION('',(-0.965931219582,-0.25879891622,0.)); +#224109 = ADVANCED_FACE('',(#224110),#224137,.F.); +#224110 = FACE_BOUND('',#224111,.F.); +#224111 = EDGE_LOOP('',(#224112,#224122,#224129,#224130)); +#224112 = ORIENTED_EDGE('',*,*,#224113,.T.); +#224113 = EDGE_CURVE('',#224114,#224116,#224118,.T.); +#224114 = VERTEX_POINT('',#224115); +#224115 = CARTESIAN_POINT('',(144.237255,-116.8,0.)); +#224116 = VERTEX_POINT('',#224117); +#224117 = CARTESIAN_POINT('',(144.237255,-116.8,-3.5E-02)); +#224118 = LINE('',#224119,#224120); +#224119 = CARTESIAN_POINT('',(144.237255,-116.8,0.)); +#224120 = VECTOR('',#224121,1.); +#224121 = DIRECTION('',(0.,0.,-1.)); +#224122 = ORIENTED_EDGE('',*,*,#224123,.T.); +#224123 = EDGE_CURVE('',#224116,#224116,#224124,.T.); +#224124 = CIRCLE('',#224125,0.137255); +#224125 = AXIS2_PLACEMENT_3D('',#224126,#224127,#224128); +#224126 = CARTESIAN_POINT('',(144.1,-116.8,-3.5E-02)); +#224127 = DIRECTION('',(0.,0.,1.)); +#224128 = DIRECTION('',(1.,0.,-0.)); +#224129 = ORIENTED_EDGE('',*,*,#224113,.F.); +#224130 = ORIENTED_EDGE('',*,*,#224131,.F.); +#224131 = EDGE_CURVE('',#224114,#224114,#224132,.T.); +#224132 = CIRCLE('',#224133,0.137255); +#224133 = AXIS2_PLACEMENT_3D('',#224134,#224135,#224136); +#224134 = CARTESIAN_POINT('',(144.1,-116.8,0.)); +#224135 = DIRECTION('',(0.,0.,1.)); +#224136 = DIRECTION('',(1.,0.,-0.)); +#224137 = CYLINDRICAL_SURFACE('',#224138,0.137255); +#224138 = AXIS2_PLACEMENT_3D('',#224139,#224140,#224141); +#224139 = CARTESIAN_POINT('',(144.1,-116.8,0.)); +#224140 = DIRECTION('',(0.,0.,1.)); +#224141 = DIRECTION('',(1.,0.,-0.)); +#224142 = ADVANCED_FACE('',(#224143,#224151),#224154,.F.); +#224143 = FACE_BOUND('',#224144,.F.); +#224144 = EDGE_LOOP('',(#224145,#224146,#224147,#224148,#224149,#224150) + ); +#224145 = ORIENTED_EDGE('',*,*,#223949,.T.); +#224146 = ORIENTED_EDGE('',*,*,#223981,.T.); +#224147 = ORIENTED_EDGE('',*,*,#224013,.T.); +#224148 = ORIENTED_EDGE('',*,*,#224044,.T.); +#224149 = ORIENTED_EDGE('',*,*,#224076,.T.); +#224150 = ORIENTED_EDGE('',*,*,#224099,.T.); +#224151 = FACE_BOUND('',#224152,.F.); +#224152 = EDGE_LOOP('',(#224153)); +#224153 = ORIENTED_EDGE('',*,*,#224131,.T.); +#224154 = PLANE('',#224155); +#224155 = AXIS2_PLACEMENT_3D('',#224156,#224157,#224158); +#224156 = CARTESIAN_POINT('',(0.,0.,0.)); +#224157 = DIRECTION('',(-0.,-0.,-1.)); +#224158 = DIRECTION('',(-1.,0.,0.)); +#224159 = ADVANCED_FACE('',(#224160,#224168),#224171,.T.); +#224160 = FACE_BOUND('',#224161,.T.); +#224161 = EDGE_LOOP('',(#224162,#224163,#224164,#224165,#224166,#224167) + ); +#224162 = ORIENTED_EDGE('',*,*,#223933,.T.); +#224163 = ORIENTED_EDGE('',*,*,#223964,.T.); +#224164 = ORIENTED_EDGE('',*,*,#223997,.T.); +#224165 = ORIENTED_EDGE('',*,*,#224028,.T.); +#224166 = ORIENTED_EDGE('',*,*,#224059,.T.); +#224167 = ORIENTED_EDGE('',*,*,#224092,.T.); +#224168 = FACE_BOUND('',#224169,.T.); +#224169 = EDGE_LOOP('',(#224170)); +#224170 = ORIENTED_EDGE('',*,*,#224123,.T.); +#224171 = PLANE('',#224172); +#224172 = AXIS2_PLACEMENT_3D('',#224173,#224174,#224175); +#224173 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#224174 = DIRECTION('',(-0.,-0.,-1.)); +#224175 = DIRECTION('',(-1.,0.,0.)); +#224176 = MANIFOLD_SOLID_BREP('',#224177); +#224177 = CLOSED_SHELL('',(#224178,#224218,#224249,#224280,#224311, + #224342,#224373,#224404,#224435,#224466,#224497,#224528,#224559, + #224590,#224621,#224652,#224683,#224714,#224745,#224776,#224807, + #224838,#224869,#224900,#224933,#224964,#224995,#225026,#225057, + #225088,#225119,#225150,#225181,#225212,#225243,#225274,#225305, + #225336,#225367,#225398,#225429,#225460,#225491,#225522,#225553, + #225584,#225615,#225646,#225677,#225710,#225732,#225765,#225798, + #225862)); +#224178 = ADVANCED_FACE('',(#224179),#224213,.F.); +#224179 = FACE_BOUND('',#224180,.F.); +#224180 = EDGE_LOOP('',(#224181,#224191,#224199,#224207)); +#224181 = ORIENTED_EDGE('',*,*,#224182,.T.); +#224182 = EDGE_CURVE('',#224183,#224185,#224187,.T.); +#224183 = VERTEX_POINT('',#224184); +#224184 = CARTESIAN_POINT('',(144.724449,-70.387682,0.)); +#224185 = VERTEX_POINT('',#224186); +#224186 = CARTESIAN_POINT('',(144.724449,-70.387682,-3.5E-02)); +#224187 = LINE('',#224188,#224189); +#224188 = CARTESIAN_POINT('',(144.724449,-70.387682,0.)); +#224189 = VECTOR('',#224190,1.); +#224190 = DIRECTION('',(0.,0.,-1.)); +#224191 = ORIENTED_EDGE('',*,*,#224192,.T.); +#224192 = EDGE_CURVE('',#224185,#224193,#224195,.T.); +#224193 = VERTEX_POINT('',#224194); +#224194 = CARTESIAN_POINT('',(144.55,-70.562132,-3.5E-02)); +#224195 = LINE('',#224196,#224197); +#224196 = CARTESIAN_POINT('',(144.724449,-70.387682,-3.5E-02)); +#224197 = VECTOR('',#224198,1.); +#224198 = DIRECTION('',(-0.707104754503,-0.707108807864,0.)); +#224199 = ORIENTED_EDGE('',*,*,#224200,.F.); +#224200 = EDGE_CURVE('',#224201,#224193,#224203,.T.); +#224201 = VERTEX_POINT('',#224202); +#224202 = CARTESIAN_POINT('',(144.55,-70.562132,0.)); +#224203 = LINE('',#224204,#224205); +#224204 = CARTESIAN_POINT('',(144.55,-70.562132,0.)); +#224205 = VECTOR('',#224206,1.); +#224206 = DIRECTION('',(0.,0.,-1.)); +#224207 = ORIENTED_EDGE('',*,*,#224208,.F.); +#224208 = EDGE_CURVE('',#224183,#224201,#224209,.T.); +#224209 = LINE('',#224210,#224211); +#224210 = CARTESIAN_POINT('',(144.724449,-70.387682,0.)); +#224211 = VECTOR('',#224212,1.); +#224212 = DIRECTION('',(-0.707104754503,-0.707108807864,0.)); +#224213 = PLANE('',#224214); +#224214 = AXIS2_PLACEMENT_3D('',#224215,#224216,#224217); +#224215 = CARTESIAN_POINT('',(144.724449,-70.387682,0.)); +#224216 = DIRECTION('',(-0.707108807864,0.707104754503,0.)); +#224217 = DIRECTION('',(-0.707104754503,-0.707108807864,0.)); +#224218 = ADVANCED_FACE('',(#224219),#224244,.F.); +#224219 = FACE_BOUND('',#224220,.F.); +#224220 = EDGE_LOOP('',(#224221,#224222,#224230,#224238)); +#224221 = ORIENTED_EDGE('',*,*,#224200,.T.); +#224222 = ORIENTED_EDGE('',*,*,#224223,.T.); +#224223 = EDGE_CURVE('',#224193,#224224,#224226,.T.); +#224224 = VERTEX_POINT('',#224225); +#224225 = CARTESIAN_POINT('',(144.547118,-76.710024,-3.5E-02)); +#224226 = LINE('',#224227,#224228); +#224227 = CARTESIAN_POINT('',(144.55,-70.562132,-3.5E-02)); +#224228 = VECTOR('',#224229,1.); +#224229 = DIRECTION('',(-4.687785151943E-04,-0.999999890123,0.)); +#224230 = ORIENTED_EDGE('',*,*,#224231,.F.); +#224231 = EDGE_CURVE('',#224232,#224224,#224234,.T.); +#224232 = VERTEX_POINT('',#224233); +#224233 = CARTESIAN_POINT('',(144.547118,-76.710024,0.)); +#224234 = LINE('',#224235,#224236); +#224235 = CARTESIAN_POINT('',(144.547118,-76.710024,0.)); +#224236 = VECTOR('',#224237,1.); +#224237 = DIRECTION('',(0.,0.,-1.)); +#224238 = ORIENTED_EDGE('',*,*,#224239,.F.); +#224239 = EDGE_CURVE('',#224201,#224232,#224240,.T.); +#224240 = LINE('',#224241,#224242); +#224241 = CARTESIAN_POINT('',(144.55,-70.562132,0.)); +#224242 = VECTOR('',#224243,1.); +#224243 = DIRECTION('',(-4.687785151943E-04,-0.999999890123,0.)); +#224244 = PLANE('',#224245); +#224245 = AXIS2_PLACEMENT_3D('',#224246,#224247,#224248); +#224246 = CARTESIAN_POINT('',(144.55,-70.562132,0.)); +#224247 = DIRECTION('',(-0.999999890123,4.687785151943E-04,0.)); +#224248 = DIRECTION('',(-4.687785151943E-04,-0.999999890123,0.)); +#224249 = ADVANCED_FACE('',(#224250),#224275,.F.); +#224250 = FACE_BOUND('',#224251,.F.); +#224251 = EDGE_LOOP('',(#224252,#224253,#224261,#224269)); +#224252 = ORIENTED_EDGE('',*,*,#224231,.T.); +#224253 = ORIENTED_EDGE('',*,*,#224254,.T.); +#224254 = EDGE_CURVE('',#224224,#224255,#224257,.T.); +#224255 = VERTEX_POINT('',#224256); +#224256 = CARTESIAN_POINT('',(144.524721,-76.764096,-3.5E-02)); +#224257 = LINE('',#224258,#224259); +#224258 = CARTESIAN_POINT('',(144.547118,-76.710024,-3.5E-02)); +#224259 = VECTOR('',#224260,1.); +#224260 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224261 = ORIENTED_EDGE('',*,*,#224262,.F.); +#224262 = EDGE_CURVE('',#224263,#224255,#224265,.T.); +#224263 = VERTEX_POINT('',#224264); +#224264 = CARTESIAN_POINT('',(144.524721,-76.764096,0.)); +#224265 = LINE('',#224266,#224267); +#224266 = CARTESIAN_POINT('',(144.524721,-76.764096,0.)); +#224267 = VECTOR('',#224268,1.); +#224268 = DIRECTION('',(0.,0.,-1.)); +#224269 = ORIENTED_EDGE('',*,*,#224270,.F.); +#224270 = EDGE_CURVE('',#224232,#224263,#224271,.T.); +#224271 = LINE('',#224272,#224273); +#224272 = CARTESIAN_POINT('',(144.547118,-76.710024,0.)); +#224273 = VECTOR('',#224274,1.); +#224274 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224275 = PLANE('',#224276); +#224276 = AXIS2_PLACEMENT_3D('',#224277,#224278,#224279); +#224277 = CARTESIAN_POINT('',(144.547118,-76.710024,0.)); +#224278 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#224279 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224280 = ADVANCED_FACE('',(#224281),#224306,.F.); +#224281 = FACE_BOUND('',#224282,.F.); +#224282 = EDGE_LOOP('',(#224283,#224284,#224292,#224300)); +#224283 = ORIENTED_EDGE('',*,*,#224262,.T.); +#224284 = ORIENTED_EDGE('',*,*,#224285,.T.); +#224285 = EDGE_CURVE('',#224255,#224286,#224288,.T.); +#224286 = VERTEX_POINT('',#224287); +#224287 = CARTESIAN_POINT('',(144.5,-76.792893,-3.5E-02)); +#224288 = LINE('',#224289,#224290); +#224289 = CARTESIAN_POINT('',(144.524721,-76.764096,-3.5E-02)); +#224290 = VECTOR('',#224291,1.); +#224291 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224292 = ORIENTED_EDGE('',*,*,#224293,.F.); +#224293 = EDGE_CURVE('',#224294,#224286,#224296,.T.); +#224294 = VERTEX_POINT('',#224295); +#224295 = CARTESIAN_POINT('',(144.5,-76.792893,0.)); +#224296 = LINE('',#224297,#224298); +#224297 = CARTESIAN_POINT('',(144.5,-76.792893,0.)); +#224298 = VECTOR('',#224299,1.); +#224299 = DIRECTION('',(0.,0.,-1.)); +#224300 = ORIENTED_EDGE('',*,*,#224301,.F.); +#224301 = EDGE_CURVE('',#224263,#224294,#224302,.T.); +#224302 = LINE('',#224303,#224304); +#224303 = CARTESIAN_POINT('',(144.524721,-76.764096,0.)); +#224304 = VECTOR('',#224305,1.); +#224305 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224306 = PLANE('',#224307); +#224307 = AXIS2_PLACEMENT_3D('',#224308,#224309,#224310); +#224308 = CARTESIAN_POINT('',(144.524721,-76.764096,0.)); +#224309 = DIRECTION('',(-0.75876350894,0.651366208442,0.)); +#224310 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224311 = ADVANCED_FACE('',(#224312),#224337,.F.); +#224312 = FACE_BOUND('',#224313,.F.); +#224313 = EDGE_LOOP('',(#224314,#224315,#224323,#224331)); +#224314 = ORIENTED_EDGE('',*,*,#224293,.T.); +#224315 = ORIENTED_EDGE('',*,*,#224316,.T.); +#224316 = EDGE_CURVE('',#224286,#224317,#224319,.T.); +#224317 = VERTEX_POINT('',#224318); +#224318 = CARTESIAN_POINT('',(144.5,-77.207107,-3.5E-02)); +#224319 = LINE('',#224320,#224321); +#224320 = CARTESIAN_POINT('',(144.5,-76.792893,-3.5E-02)); +#224321 = VECTOR('',#224322,1.); +#224322 = DIRECTION('',(0.,-1.,0.)); +#224323 = ORIENTED_EDGE('',*,*,#224324,.F.); +#224324 = EDGE_CURVE('',#224325,#224317,#224327,.T.); +#224325 = VERTEX_POINT('',#224326); +#224326 = CARTESIAN_POINT('',(144.5,-77.207107,0.)); +#224327 = LINE('',#224328,#224329); +#224328 = CARTESIAN_POINT('',(144.5,-77.207107,0.)); +#224329 = VECTOR('',#224330,1.); +#224330 = DIRECTION('',(0.,0.,-1.)); +#224331 = ORIENTED_EDGE('',*,*,#224332,.F.); +#224332 = EDGE_CURVE('',#224294,#224325,#224333,.T.); +#224333 = LINE('',#224334,#224335); +#224334 = CARTESIAN_POINT('',(144.5,-76.792893,0.)); +#224335 = VECTOR('',#224336,1.); +#224336 = DIRECTION('',(0.,-1.,0.)); +#224337 = PLANE('',#224338); +#224338 = AXIS2_PLACEMENT_3D('',#224339,#224340,#224341); +#224339 = CARTESIAN_POINT('',(144.5,-76.792893,0.)); +#224340 = DIRECTION('',(-1.,-0.,-0.)); +#224341 = DIRECTION('',(0.,-1.,0.)); +#224342 = ADVANCED_FACE('',(#224343),#224368,.F.); +#224343 = FACE_BOUND('',#224344,.F.); +#224344 = EDGE_LOOP('',(#224345,#224346,#224354,#224362)); +#224345 = ORIENTED_EDGE('',*,*,#224324,.T.); +#224346 = ORIENTED_EDGE('',*,*,#224347,.T.); +#224347 = EDGE_CURVE('',#224317,#224348,#224350,.T.); +#224348 = VERTEX_POINT('',#224349); +#224349 = CARTESIAN_POINT('',(144.524721,-77.235904,-3.5E-02)); +#224350 = LINE('',#224351,#224352); +#224351 = CARTESIAN_POINT('',(144.5,-77.207107,-3.5E-02)); +#224352 = VECTOR('',#224353,1.); +#224353 = DIRECTION('',(0.651366208442,-0.75876350894,0.)); +#224354 = ORIENTED_EDGE('',*,*,#224355,.F.); +#224355 = EDGE_CURVE('',#224356,#224348,#224358,.T.); +#224356 = VERTEX_POINT('',#224357); +#224357 = CARTESIAN_POINT('',(144.524721,-77.235904,0.)); +#224358 = LINE('',#224359,#224360); +#224359 = CARTESIAN_POINT('',(144.524721,-77.235904,0.)); +#224360 = VECTOR('',#224361,1.); +#224361 = DIRECTION('',(0.,0.,-1.)); +#224362 = ORIENTED_EDGE('',*,*,#224363,.F.); +#224363 = EDGE_CURVE('',#224325,#224356,#224364,.T.); +#224364 = LINE('',#224365,#224366); +#224365 = CARTESIAN_POINT('',(144.5,-77.207107,0.)); +#224366 = VECTOR('',#224367,1.); +#224367 = DIRECTION('',(0.651366208442,-0.75876350894,0.)); +#224368 = PLANE('',#224369); +#224369 = AXIS2_PLACEMENT_3D('',#224370,#224371,#224372); +#224370 = CARTESIAN_POINT('',(144.5,-77.207107,0.)); +#224371 = DIRECTION('',(-0.75876350894,-0.651366208442,-0.)); +#224372 = DIRECTION('',(0.651366208442,-0.75876350894,0.)); +#224373 = ADVANCED_FACE('',(#224374),#224399,.F.); +#224374 = FACE_BOUND('',#224375,.F.); +#224375 = EDGE_LOOP('',(#224376,#224377,#224385,#224393)); +#224376 = ORIENTED_EDGE('',*,*,#224355,.T.); +#224377 = ORIENTED_EDGE('',*,*,#224378,.T.); +#224378 = EDGE_CURVE('',#224348,#224379,#224381,.T.); +#224379 = VERTEX_POINT('',#224380); +#224380 = CARTESIAN_POINT('',(144.547118,-77.289975,-3.5E-02)); +#224381 = LINE('',#224382,#224383); +#224382 = CARTESIAN_POINT('',(144.524721,-77.235904,-3.5E-02)); +#224383 = VECTOR('',#224384,1.); +#224384 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224385 = ORIENTED_EDGE('',*,*,#224386,.F.); +#224386 = EDGE_CURVE('',#224387,#224379,#224389,.T.); +#224387 = VERTEX_POINT('',#224388); +#224388 = CARTESIAN_POINT('',(144.547118,-77.289975,0.)); +#224389 = LINE('',#224390,#224391); +#224390 = CARTESIAN_POINT('',(144.547118,-77.289975,0.)); +#224391 = VECTOR('',#224392,1.); +#224392 = DIRECTION('',(0.,0.,-1.)); +#224393 = ORIENTED_EDGE('',*,*,#224394,.F.); +#224394 = EDGE_CURVE('',#224356,#224387,#224395,.T.); +#224395 = LINE('',#224396,#224397); +#224396 = CARTESIAN_POINT('',(144.524721,-77.235904,0.)); +#224397 = VECTOR('',#224398,1.); +#224398 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224399 = PLANE('',#224400); +#224400 = AXIS2_PLACEMENT_3D('',#224401,#224402,#224403); +#224401 = CARTESIAN_POINT('',(144.524721,-77.235904,0.)); +#224402 = DIRECTION('',(-0.923879179303,-0.382684285085,-0.)); +#224403 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224404 = ADVANCED_FACE('',(#224405),#224430,.F.); +#224405 = FACE_BOUND('',#224406,.F.); +#224406 = EDGE_LOOP('',(#224407,#224408,#224416,#224424)); +#224407 = ORIENTED_EDGE('',*,*,#224386,.T.); +#224408 = ORIENTED_EDGE('',*,*,#224409,.T.); +#224409 = EDGE_CURVE('',#224379,#224410,#224412,.T.); +#224410 = VERTEX_POINT('',#224411); +#224411 = CARTESIAN_POINT('',(144.547118,-78.210024,-3.5E-02)); +#224412 = LINE('',#224413,#224414); +#224413 = CARTESIAN_POINT('',(144.547118,-77.289975,-3.5E-02)); +#224414 = VECTOR('',#224415,1.); +#224415 = DIRECTION('',(0.,-1.,0.)); +#224416 = ORIENTED_EDGE('',*,*,#224417,.F.); +#224417 = EDGE_CURVE('',#224418,#224410,#224420,.T.); +#224418 = VERTEX_POINT('',#224419); +#224419 = CARTESIAN_POINT('',(144.547118,-78.210024,0.)); +#224420 = LINE('',#224421,#224422); +#224421 = CARTESIAN_POINT('',(144.547118,-78.210024,0.)); +#224422 = VECTOR('',#224423,1.); +#224423 = DIRECTION('',(0.,0.,-1.)); +#224424 = ORIENTED_EDGE('',*,*,#224425,.F.); +#224425 = EDGE_CURVE('',#224387,#224418,#224426,.T.); +#224426 = LINE('',#224427,#224428); +#224427 = CARTESIAN_POINT('',(144.547118,-77.289975,0.)); +#224428 = VECTOR('',#224429,1.); +#224429 = DIRECTION('',(0.,-1.,0.)); +#224430 = PLANE('',#224431); +#224431 = AXIS2_PLACEMENT_3D('',#224432,#224433,#224434); +#224432 = CARTESIAN_POINT('',(144.547118,-77.289975,0.)); +#224433 = DIRECTION('',(-1.,-0.,-0.)); +#224434 = DIRECTION('',(0.,-1.,0.)); +#224435 = ADVANCED_FACE('',(#224436),#224461,.F.); +#224436 = FACE_BOUND('',#224437,.F.); +#224437 = EDGE_LOOP('',(#224438,#224439,#224447,#224455)); +#224438 = ORIENTED_EDGE('',*,*,#224417,.T.); +#224439 = ORIENTED_EDGE('',*,*,#224440,.T.); +#224440 = EDGE_CURVE('',#224410,#224441,#224443,.T.); +#224441 = VERTEX_POINT('',#224442); +#224442 = CARTESIAN_POINT('',(144.524721,-78.264096,-3.5E-02)); +#224443 = LINE('',#224444,#224445); +#224444 = CARTESIAN_POINT('',(144.547118,-78.210024,-3.5E-02)); +#224445 = VECTOR('',#224446,1.); +#224446 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224447 = ORIENTED_EDGE('',*,*,#224448,.F.); +#224448 = EDGE_CURVE('',#224449,#224441,#224451,.T.); +#224449 = VERTEX_POINT('',#224450); +#224450 = CARTESIAN_POINT('',(144.524721,-78.264096,0.)); +#224451 = LINE('',#224452,#224453); +#224452 = CARTESIAN_POINT('',(144.524721,-78.264096,0.)); +#224453 = VECTOR('',#224454,1.); +#224454 = DIRECTION('',(0.,0.,-1.)); +#224455 = ORIENTED_EDGE('',*,*,#224456,.F.); +#224456 = EDGE_CURVE('',#224418,#224449,#224457,.T.); +#224457 = LINE('',#224458,#224459); +#224458 = CARTESIAN_POINT('',(144.547118,-78.210024,0.)); +#224459 = VECTOR('',#224460,1.); +#224460 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224461 = PLANE('',#224462); +#224462 = AXIS2_PLACEMENT_3D('',#224463,#224464,#224465); +#224463 = CARTESIAN_POINT('',(144.547118,-78.210024,0.)); +#224464 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#224465 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224466 = ADVANCED_FACE('',(#224467),#224492,.F.); +#224467 = FACE_BOUND('',#224468,.F.); +#224468 = EDGE_LOOP('',(#224469,#224470,#224478,#224486)); +#224469 = ORIENTED_EDGE('',*,*,#224448,.T.); +#224470 = ORIENTED_EDGE('',*,*,#224471,.T.); +#224471 = EDGE_CURVE('',#224441,#224472,#224474,.T.); +#224472 = VERTEX_POINT('',#224473); +#224473 = CARTESIAN_POINT('',(144.5,-78.292893,-3.5E-02)); +#224474 = LINE('',#224475,#224476); +#224475 = CARTESIAN_POINT('',(144.524721,-78.264096,-3.5E-02)); +#224476 = VECTOR('',#224477,1.); +#224477 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224478 = ORIENTED_EDGE('',*,*,#224479,.F.); +#224479 = EDGE_CURVE('',#224480,#224472,#224482,.T.); +#224480 = VERTEX_POINT('',#224481); +#224481 = CARTESIAN_POINT('',(144.5,-78.292893,0.)); +#224482 = LINE('',#224483,#224484); +#224483 = CARTESIAN_POINT('',(144.5,-78.292893,0.)); +#224484 = VECTOR('',#224485,1.); +#224485 = DIRECTION('',(0.,0.,-1.)); +#224486 = ORIENTED_EDGE('',*,*,#224487,.F.); +#224487 = EDGE_CURVE('',#224449,#224480,#224488,.T.); +#224488 = LINE('',#224489,#224490); +#224489 = CARTESIAN_POINT('',(144.524721,-78.264096,0.)); +#224490 = VECTOR('',#224491,1.); +#224491 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224492 = PLANE('',#224493); +#224493 = AXIS2_PLACEMENT_3D('',#224494,#224495,#224496); +#224494 = CARTESIAN_POINT('',(144.524721,-78.264096,0.)); +#224495 = DIRECTION('',(-0.75876350894,0.651366208442,0.)); +#224496 = DIRECTION('',(-0.651366208442,-0.75876350894,0.)); +#224497 = ADVANCED_FACE('',(#224498),#224523,.F.); +#224498 = FACE_BOUND('',#224499,.F.); +#224499 = EDGE_LOOP('',(#224500,#224501,#224509,#224517)); +#224500 = ORIENTED_EDGE('',*,*,#224479,.T.); +#224501 = ORIENTED_EDGE('',*,*,#224502,.T.); +#224502 = EDGE_CURVE('',#224472,#224503,#224505,.T.); +#224503 = VERTEX_POINT('',#224504); +#224504 = CARTESIAN_POINT('',(144.497118,-78.542867,-3.5E-02)); +#224505 = LINE('',#224506,#224507); +#224506 = CARTESIAN_POINT('',(144.5,-78.292893,-3.5E-02)); +#224507 = VECTOR('',#224508,1.); +#224508 = DIRECTION('',(-1.15284328685E-02,-0.99993354541,0.)); +#224509 = ORIENTED_EDGE('',*,*,#224510,.F.); +#224510 = EDGE_CURVE('',#224511,#224503,#224513,.T.); +#224511 = VERTEX_POINT('',#224512); +#224512 = CARTESIAN_POINT('',(144.497118,-78.542867,0.)); +#224513 = LINE('',#224514,#224515); +#224514 = CARTESIAN_POINT('',(144.497118,-78.542867,0.)); +#224515 = VECTOR('',#224516,1.); +#224516 = DIRECTION('',(0.,0.,-1.)); +#224517 = ORIENTED_EDGE('',*,*,#224518,.F.); +#224518 = EDGE_CURVE('',#224480,#224511,#224519,.T.); +#224519 = LINE('',#224520,#224521); +#224520 = CARTESIAN_POINT('',(144.5,-78.292893,0.)); +#224521 = VECTOR('',#224522,1.); +#224522 = DIRECTION('',(-1.15284328685E-02,-0.99993354541,0.)); +#224523 = PLANE('',#224524); +#224524 = AXIS2_PLACEMENT_3D('',#224525,#224526,#224527); +#224525 = CARTESIAN_POINT('',(144.5,-78.292893,0.)); +#224526 = DIRECTION('',(-0.99993354541,1.15284328685E-02,0.)); +#224527 = DIRECTION('',(-1.15284328685E-02,-0.99993354541,0.)); +#224528 = ADVANCED_FACE('',(#224529),#224554,.F.); +#224529 = FACE_BOUND('',#224530,.F.); +#224530 = EDGE_LOOP('',(#224531,#224532,#224540,#224548)); +#224531 = ORIENTED_EDGE('',*,*,#224510,.T.); +#224532 = ORIENTED_EDGE('',*,*,#224533,.T.); +#224533 = EDGE_CURVE('',#224503,#224534,#224536,.T.); +#224534 = VERTEX_POINT('',#224535); +#224535 = CARTESIAN_POINT('',(144.474721,-78.596939,-3.5E-02)); +#224536 = LINE('',#224537,#224538); +#224537 = CARTESIAN_POINT('',(144.497118,-78.542867,-3.5E-02)); +#224538 = VECTOR('',#224539,1.); +#224539 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224540 = ORIENTED_EDGE('',*,*,#224541,.F.); +#224541 = EDGE_CURVE('',#224542,#224534,#224544,.T.); +#224542 = VERTEX_POINT('',#224543); +#224543 = CARTESIAN_POINT('',(144.474721,-78.596939,0.)); +#224544 = LINE('',#224545,#224546); +#224545 = CARTESIAN_POINT('',(144.474721,-78.596939,0.)); +#224546 = VECTOR('',#224547,1.); +#224547 = DIRECTION('',(0.,0.,-1.)); +#224548 = ORIENTED_EDGE('',*,*,#224549,.F.); +#224549 = EDGE_CURVE('',#224511,#224542,#224550,.T.); +#224550 = LINE('',#224551,#224552); +#224551 = CARTESIAN_POINT('',(144.497118,-78.542867,0.)); +#224552 = VECTOR('',#224553,1.); +#224553 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224554 = PLANE('',#224555); +#224555 = AXIS2_PLACEMENT_3D('',#224556,#224557,#224558); +#224556 = CARTESIAN_POINT('',(144.497118,-78.542867,0.)); +#224557 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#224558 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224559 = ADVANCED_FACE('',(#224560),#224585,.F.); +#224560 = FACE_BOUND('',#224561,.F.); +#224561 = EDGE_LOOP('',(#224562,#224563,#224571,#224579)); +#224562 = ORIENTED_EDGE('',*,*,#224541,.T.); +#224563 = ORIENTED_EDGE('',*,*,#224564,.T.); +#224564 = EDGE_CURVE('',#224534,#224565,#224567,.T.); +#224565 = VERTEX_POINT('',#224566); +#224566 = CARTESIAN_POINT('',(144.2,-78.875736,-3.5E-02)); +#224567 = LINE('',#224568,#224569); +#224568 = CARTESIAN_POINT('',(144.474721,-78.596939,-3.5E-02)); +#224569 = VECTOR('',#224570,1.); +#224570 = DIRECTION('',(-0.701880753252,-0.712294467348,0.)); +#224571 = ORIENTED_EDGE('',*,*,#224572,.F.); +#224572 = EDGE_CURVE('',#224573,#224565,#224575,.T.); +#224573 = VERTEX_POINT('',#224574); +#224574 = CARTESIAN_POINT('',(144.2,-78.875736,0.)); +#224575 = LINE('',#224576,#224577); +#224576 = CARTESIAN_POINT('',(144.2,-78.875736,0.)); +#224577 = VECTOR('',#224578,1.); +#224578 = DIRECTION('',(0.,0.,-1.)); +#224579 = ORIENTED_EDGE('',*,*,#224580,.F.); +#224580 = EDGE_CURVE('',#224542,#224573,#224581,.T.); +#224581 = LINE('',#224582,#224583); +#224582 = CARTESIAN_POINT('',(144.474721,-78.596939,0.)); +#224583 = VECTOR('',#224584,1.); +#224584 = DIRECTION('',(-0.701880753252,-0.712294467348,0.)); +#224585 = PLANE('',#224586); +#224586 = AXIS2_PLACEMENT_3D('',#224587,#224588,#224589); +#224587 = CARTESIAN_POINT('',(144.474721,-78.596939,0.)); +#224588 = DIRECTION('',(-0.712294467348,0.701880753252,0.)); +#224589 = DIRECTION('',(-0.701880753252,-0.712294467348,0.)); +#224590 = ADVANCED_FACE('',(#224591),#224616,.F.); +#224591 = FACE_BOUND('',#224592,.F.); +#224592 = EDGE_LOOP('',(#224593,#224594,#224602,#224610)); +#224593 = ORIENTED_EDGE('',*,*,#224572,.T.); +#224594 = ORIENTED_EDGE('',*,*,#224595,.T.); +#224595 = EDGE_CURVE('',#224565,#224596,#224598,.T.); +#224596 = VERTEX_POINT('',#224597); +#224597 = CARTESIAN_POINT('',(144.197118,-79.362964,-3.5E-02)); +#224598 = LINE('',#224599,#224600); +#224599 = CARTESIAN_POINT('',(144.2,-78.875736,-3.5E-02)); +#224600 = VECTOR('',#224601,1.); +#224601 = DIRECTION('',(-5.914991714574E-03,-0.999982506283,0.)); +#224602 = ORIENTED_EDGE('',*,*,#224603,.F.); +#224603 = EDGE_CURVE('',#224604,#224596,#224606,.T.); +#224604 = VERTEX_POINT('',#224605); +#224605 = CARTESIAN_POINT('',(144.197118,-79.362964,0.)); +#224606 = LINE('',#224607,#224608); +#224607 = CARTESIAN_POINT('',(144.197118,-79.362964,0.)); +#224608 = VECTOR('',#224609,1.); +#224609 = DIRECTION('',(0.,0.,-1.)); +#224610 = ORIENTED_EDGE('',*,*,#224611,.F.); +#224611 = EDGE_CURVE('',#224573,#224604,#224612,.T.); +#224612 = LINE('',#224613,#224614); +#224613 = CARTESIAN_POINT('',(144.2,-78.875736,0.)); +#224614 = VECTOR('',#224615,1.); +#224615 = DIRECTION('',(-5.914991714574E-03,-0.999982506283,0.)); +#224616 = PLANE('',#224617); +#224617 = AXIS2_PLACEMENT_3D('',#224618,#224619,#224620); +#224618 = CARTESIAN_POINT('',(144.2,-78.875736,0.)); +#224619 = DIRECTION('',(-0.999982506283,5.914991714574E-03,0.)); +#224620 = DIRECTION('',(-5.914991714574E-03,-0.999982506283,0.)); +#224621 = ADVANCED_FACE('',(#224622),#224647,.F.); +#224622 = FACE_BOUND('',#224623,.F.); +#224623 = EDGE_LOOP('',(#224624,#224625,#224633,#224641)); +#224624 = ORIENTED_EDGE('',*,*,#224603,.T.); +#224625 = ORIENTED_EDGE('',*,*,#224626,.T.); +#224626 = EDGE_CURVE('',#224596,#224627,#224629,.T.); +#224627 = VERTEX_POINT('',#224628); +#224628 = CARTESIAN_POINT('',(144.174721,-79.417036,-3.5E-02)); +#224629 = LINE('',#224630,#224631); +#224630 = CARTESIAN_POINT('',(144.197118,-79.362964,-3.5E-02)); +#224631 = VECTOR('',#224632,1.); +#224632 = DIRECTION('',(-0.382678244203,-0.923881681501,0.)); +#224633 = ORIENTED_EDGE('',*,*,#224634,.F.); +#224634 = EDGE_CURVE('',#224635,#224627,#224637,.T.); +#224635 = VERTEX_POINT('',#224636); +#224636 = CARTESIAN_POINT('',(144.174721,-79.417036,0.)); +#224637 = LINE('',#224638,#224639); +#224638 = CARTESIAN_POINT('',(144.174721,-79.417036,0.)); +#224639 = VECTOR('',#224640,1.); +#224640 = DIRECTION('',(0.,0.,-1.)); +#224641 = ORIENTED_EDGE('',*,*,#224642,.F.); +#224642 = EDGE_CURVE('',#224604,#224635,#224643,.T.); +#224643 = LINE('',#224644,#224645); +#224644 = CARTESIAN_POINT('',(144.197118,-79.362964,0.)); +#224645 = VECTOR('',#224646,1.); +#224646 = DIRECTION('',(-0.382678244203,-0.923881681501,0.)); +#224647 = PLANE('',#224648); +#224648 = AXIS2_PLACEMENT_3D('',#224649,#224650,#224651); +#224649 = CARTESIAN_POINT('',(144.197118,-79.362964,0.)); +#224650 = DIRECTION('',(-0.923881681501,0.382678244203,0.)); +#224651 = DIRECTION('',(-0.382678244203,-0.923881681501,0.)); +#224652 = ADVANCED_FACE('',(#224653),#224678,.F.); +#224653 = FACE_BOUND('',#224654,.F.); +#224654 = EDGE_LOOP('',(#224655,#224656,#224664,#224672)); +#224655 = ORIENTED_EDGE('',*,*,#224634,.T.); +#224656 = ORIENTED_EDGE('',*,*,#224657,.T.); +#224657 = EDGE_CURVE('',#224627,#224658,#224660,.T.); +#224658 = VERTEX_POINT('',#224659); +#224659 = CARTESIAN_POINT('',(144.034313,-79.56152,-3.5E-02)); +#224660 = LINE('',#224661,#224662); +#224661 = CARTESIAN_POINT('',(144.174721,-79.417036,-3.5E-02)); +#224662 = VECTOR('',#224663,1.); +#224663 = DIRECTION('',(-0.696918755638,-0.717150087527,0.)); +#224664 = ORIENTED_EDGE('',*,*,#224665,.F.); +#224665 = EDGE_CURVE('',#224666,#224658,#224668,.T.); +#224666 = VERTEX_POINT('',#224667); +#224667 = CARTESIAN_POINT('',(144.034313,-79.56152,0.)); +#224668 = LINE('',#224669,#224670); +#224669 = CARTESIAN_POINT('',(144.034313,-79.56152,0.)); +#224670 = VECTOR('',#224671,1.); +#224671 = DIRECTION('',(0.,0.,-1.)); +#224672 = ORIENTED_EDGE('',*,*,#224673,.F.); +#224673 = EDGE_CURVE('',#224635,#224666,#224674,.T.); +#224674 = LINE('',#224675,#224676); +#224675 = CARTESIAN_POINT('',(144.174721,-79.417036,0.)); +#224676 = VECTOR('',#224677,1.); +#224677 = DIRECTION('',(-0.696918755638,-0.717150087527,0.)); +#224678 = PLANE('',#224679); +#224679 = AXIS2_PLACEMENT_3D('',#224680,#224681,#224682); +#224680 = CARTESIAN_POINT('',(144.174721,-79.417036,0.)); +#224681 = DIRECTION('',(-0.717150087527,0.696918755638,0.)); +#224682 = DIRECTION('',(-0.696918755638,-0.717150087527,0.)); +#224683 = ADVANCED_FACE('',(#224684),#224709,.F.); +#224684 = FACE_BOUND('',#224685,.F.); +#224685 = EDGE_LOOP('',(#224686,#224687,#224695,#224703)); +#224686 = ORIENTED_EDGE('',*,*,#224665,.T.); +#224687 = ORIENTED_EDGE('',*,*,#224688,.T.); +#224688 = EDGE_CURVE('',#224658,#224689,#224691,.T.); +#224689 = VERTEX_POINT('',#224690); +#224690 = CARTESIAN_POINT('',(144.034313,-80.307106,-3.5E-02)); +#224691 = LINE('',#224692,#224693); +#224692 = CARTESIAN_POINT('',(144.034313,-79.56152,-3.5E-02)); +#224693 = VECTOR('',#224694,1.); +#224694 = DIRECTION('',(0.,-1.,0.)); +#224695 = ORIENTED_EDGE('',*,*,#224696,.F.); +#224696 = EDGE_CURVE('',#224697,#224689,#224699,.T.); +#224697 = VERTEX_POINT('',#224698); +#224698 = CARTESIAN_POINT('',(144.034313,-80.307106,0.)); +#224699 = LINE('',#224700,#224701); +#224700 = CARTESIAN_POINT('',(144.034313,-80.307106,0.)); +#224701 = VECTOR('',#224702,1.); +#224702 = DIRECTION('',(0.,0.,-1.)); +#224703 = ORIENTED_EDGE('',*,*,#224704,.F.); +#224704 = EDGE_CURVE('',#224666,#224697,#224705,.T.); +#224705 = LINE('',#224706,#224707); +#224706 = CARTESIAN_POINT('',(144.034313,-79.56152,0.)); +#224707 = VECTOR('',#224708,1.); +#224708 = DIRECTION('',(0.,-1.,0.)); +#224709 = PLANE('',#224710); +#224710 = AXIS2_PLACEMENT_3D('',#224711,#224712,#224713); +#224711 = CARTESIAN_POINT('',(144.034313,-79.56152,0.)); +#224712 = DIRECTION('',(-1.,-0.,-0.)); +#224713 = DIRECTION('',(0.,-1.,0.)); +#224714 = ADVANCED_FACE('',(#224715),#224740,.F.); +#224715 = FACE_BOUND('',#224716,.F.); +#224716 = EDGE_LOOP('',(#224717,#224718,#224726,#224734)); +#224717 = ORIENTED_EDGE('',*,*,#224696,.T.); +#224718 = ORIENTED_EDGE('',*,*,#224719,.T.); +#224719 = EDGE_CURVE('',#224689,#224720,#224722,.T.); +#224720 = VERTEX_POINT('',#224721); +#224721 = CARTESIAN_POINT('',(144.274721,-80.55159,-3.5E-02)); +#224722 = LINE('',#224723,#224724); +#224723 = CARTESIAN_POINT('',(144.034313,-80.307106,-3.5E-02)); +#224724 = VECTOR('',#224725,1.); +#224725 = DIRECTION('',(0.701138073685,-0.713025526633,0.)); +#224726 = ORIENTED_EDGE('',*,*,#224727,.F.); +#224727 = EDGE_CURVE('',#224728,#224720,#224730,.T.); +#224728 = VERTEX_POINT('',#224729); +#224729 = CARTESIAN_POINT('',(144.274721,-80.55159,0.)); +#224730 = LINE('',#224731,#224732); +#224731 = CARTESIAN_POINT('',(144.274721,-80.55159,0.)); +#224732 = VECTOR('',#224733,1.); +#224733 = DIRECTION('',(0.,0.,-1.)); +#224734 = ORIENTED_EDGE('',*,*,#224735,.F.); +#224735 = EDGE_CURVE('',#224697,#224728,#224736,.T.); +#224736 = LINE('',#224737,#224738); +#224737 = CARTESIAN_POINT('',(144.034313,-80.307106,0.)); +#224738 = VECTOR('',#224739,1.); +#224739 = DIRECTION('',(0.701138073685,-0.713025526633,0.)); +#224740 = PLANE('',#224741); +#224741 = AXIS2_PLACEMENT_3D('',#224742,#224743,#224744); +#224742 = CARTESIAN_POINT('',(144.034313,-80.307106,0.)); +#224743 = DIRECTION('',(-0.713025526633,-0.701138073685,-0.)); +#224744 = DIRECTION('',(0.701138073685,-0.713025526633,0.)); +#224745 = ADVANCED_FACE('',(#224746),#224771,.F.); +#224746 = FACE_BOUND('',#224747,.F.); +#224747 = EDGE_LOOP('',(#224748,#224749,#224757,#224765)); +#224748 = ORIENTED_EDGE('',*,*,#224727,.T.); +#224749 = ORIENTED_EDGE('',*,*,#224750,.T.); +#224750 = EDGE_CURVE('',#224720,#224751,#224753,.T.); +#224751 = VERTEX_POINT('',#224752); +#224752 = CARTESIAN_POINT('',(144.297118,-80.605661,-3.5E-02)); +#224753 = LINE('',#224754,#224755); +#224754 = CARTESIAN_POINT('',(144.274721,-80.55159,-3.5E-02)); +#224755 = VECTOR('',#224756,1.); +#224756 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224757 = ORIENTED_EDGE('',*,*,#224758,.F.); +#224758 = EDGE_CURVE('',#224759,#224751,#224761,.T.); +#224759 = VERTEX_POINT('',#224760); +#224760 = CARTESIAN_POINT('',(144.297118,-80.605661,0.)); +#224761 = LINE('',#224762,#224763); +#224762 = CARTESIAN_POINT('',(144.297118,-80.605661,0.)); +#224763 = VECTOR('',#224764,1.); +#224764 = DIRECTION('',(0.,0.,-1.)); +#224765 = ORIENTED_EDGE('',*,*,#224766,.F.); +#224766 = EDGE_CURVE('',#224728,#224759,#224767,.T.); +#224767 = LINE('',#224768,#224769); +#224768 = CARTESIAN_POINT('',(144.274721,-80.55159,0.)); +#224769 = VECTOR('',#224770,1.); +#224770 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224771 = PLANE('',#224772); +#224772 = AXIS2_PLACEMENT_3D('',#224773,#224774,#224775); +#224773 = CARTESIAN_POINT('',(144.274721,-80.55159,0.)); +#224774 = DIRECTION('',(-0.923879179303,-0.382684285085,-0.)); +#224775 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#224776 = ADVANCED_FACE('',(#224777),#224802,.F.); +#224777 = FACE_BOUND('',#224778,.F.); +#224778 = EDGE_LOOP('',(#224779,#224780,#224788,#224796)); +#224779 = ORIENTED_EDGE('',*,*,#224758,.T.); +#224780 = ORIENTED_EDGE('',*,*,#224781,.T.); +#224781 = EDGE_CURVE('',#224751,#224782,#224784,.T.); +#224782 = VERTEX_POINT('',#224783); +#224783 = CARTESIAN_POINT('',(144.297118,-85.960024,-3.5E-02)); +#224784 = LINE('',#224785,#224786); +#224785 = CARTESIAN_POINT('',(144.297118,-80.605661,-3.5E-02)); +#224786 = VECTOR('',#224787,1.); +#224787 = DIRECTION('',(0.,-1.,0.)); +#224788 = ORIENTED_EDGE('',*,*,#224789,.F.); +#224789 = EDGE_CURVE('',#224790,#224782,#224792,.T.); +#224790 = VERTEX_POINT('',#224791); +#224791 = CARTESIAN_POINT('',(144.297118,-85.960024,0.)); +#224792 = LINE('',#224793,#224794); +#224793 = CARTESIAN_POINT('',(144.297118,-85.960024,0.)); +#224794 = VECTOR('',#224795,1.); +#224795 = DIRECTION('',(0.,0.,-1.)); +#224796 = ORIENTED_EDGE('',*,*,#224797,.F.); +#224797 = EDGE_CURVE('',#224759,#224790,#224798,.T.); +#224798 = LINE('',#224799,#224800); +#224799 = CARTESIAN_POINT('',(144.297118,-80.605661,0.)); +#224800 = VECTOR('',#224801,1.); +#224801 = DIRECTION('',(0.,-1.,0.)); +#224802 = PLANE('',#224803); +#224803 = AXIS2_PLACEMENT_3D('',#224804,#224805,#224806); +#224804 = CARTESIAN_POINT('',(144.297118,-80.605661,0.)); +#224805 = DIRECTION('',(-1.,-0.,-0.)); +#224806 = DIRECTION('',(0.,-1.,0.)); +#224807 = ADVANCED_FACE('',(#224808),#224833,.F.); +#224808 = FACE_BOUND('',#224809,.F.); +#224809 = EDGE_LOOP('',(#224810,#224811,#224819,#224827)); +#224810 = ORIENTED_EDGE('',*,*,#224789,.T.); +#224811 = ORIENTED_EDGE('',*,*,#224812,.T.); +#224812 = EDGE_CURVE('',#224782,#224813,#224815,.T.); +#224813 = VERTEX_POINT('',#224814); +#224814 = CARTESIAN_POINT('',(144.274721,-86.014096,-3.5E-02)); +#224815 = LINE('',#224816,#224817); +#224816 = CARTESIAN_POINT('',(144.297118,-85.960024,-3.5E-02)); +#224817 = VECTOR('',#224818,1.); +#224818 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224819 = ORIENTED_EDGE('',*,*,#224820,.F.); +#224820 = EDGE_CURVE('',#224821,#224813,#224823,.T.); +#224821 = VERTEX_POINT('',#224822); +#224822 = CARTESIAN_POINT('',(144.274721,-86.014096,0.)); +#224823 = LINE('',#224824,#224825); +#224824 = CARTESIAN_POINT('',(144.274721,-86.014096,0.)); +#224825 = VECTOR('',#224826,1.); +#224826 = DIRECTION('',(0.,0.,-1.)); +#224827 = ORIENTED_EDGE('',*,*,#224828,.F.); +#224828 = EDGE_CURVE('',#224790,#224821,#224829,.T.); +#224829 = LINE('',#224830,#224831); +#224830 = CARTESIAN_POINT('',(144.297118,-85.960024,0.)); +#224831 = VECTOR('',#224832,1.); +#224832 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224833 = PLANE('',#224834); +#224834 = AXIS2_PLACEMENT_3D('',#224835,#224836,#224837); +#224835 = CARTESIAN_POINT('',(144.297118,-85.960024,0.)); +#224836 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#224837 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#224838 = ADVANCED_FACE('',(#224839),#224864,.F.); +#224839 = FACE_BOUND('',#224840,.F.); +#224840 = EDGE_LOOP('',(#224841,#224842,#224850,#224858)); +#224841 = ORIENTED_EDGE('',*,*,#224820,.T.); +#224842 = ORIENTED_EDGE('',*,*,#224843,.T.); +#224843 = EDGE_CURVE('',#224813,#224844,#224846,.T.); +#224844 = VERTEX_POINT('',#224845); +#224845 = CARTESIAN_POINT('',(140.683616,-89.609276,-3.5E-02)); +#224846 = LINE('',#224847,#224848); +#224847 = CARTESIAN_POINT('',(144.274721,-86.014096,-3.5E-02)); +#224848 = VECTOR('',#224849,1.); +#224849 = DIRECTION('',(-0.706705700985,-0.70750763402,0.)); +#224850 = ORIENTED_EDGE('',*,*,#224851,.F.); +#224851 = EDGE_CURVE('',#224852,#224844,#224854,.T.); +#224852 = VERTEX_POINT('',#224853); +#224853 = CARTESIAN_POINT('',(140.683616,-89.609276,0.)); +#224854 = LINE('',#224855,#224856); +#224855 = CARTESIAN_POINT('',(140.683616,-89.609276,0.)); +#224856 = VECTOR('',#224857,1.); +#224857 = DIRECTION('',(0.,0.,-1.)); +#224858 = ORIENTED_EDGE('',*,*,#224859,.F.); +#224859 = EDGE_CURVE('',#224821,#224852,#224860,.T.); +#224860 = LINE('',#224861,#224862); +#224861 = CARTESIAN_POINT('',(144.274721,-86.014096,0.)); +#224862 = VECTOR('',#224863,1.); +#224863 = DIRECTION('',(-0.706705700985,-0.70750763402,0.)); +#224864 = PLANE('',#224865); +#224865 = AXIS2_PLACEMENT_3D('',#224866,#224867,#224868); +#224866 = CARTESIAN_POINT('',(144.274721,-86.014096,0.)); +#224867 = DIRECTION('',(-0.70750763402,0.706705700985,0.)); +#224868 = DIRECTION('',(-0.706705700985,-0.70750763402,0.)); +#224869 = ADVANCED_FACE('',(#224870),#224895,.F.); +#224870 = FACE_BOUND('',#224871,.F.); +#224871 = EDGE_LOOP('',(#224872,#224873,#224881,#224889)); +#224872 = ORIENTED_EDGE('',*,*,#224851,.T.); +#224873 = ORIENTED_EDGE('',*,*,#224874,.T.); +#224874 = EDGE_CURVE('',#224844,#224875,#224877,.T.); +#224875 = VERTEX_POINT('',#224876); +#224876 = CARTESIAN_POINT('',(140.697433,-89.660842,-3.5E-02)); +#224877 = LINE('',#224878,#224879); +#224878 = CARTESIAN_POINT('',(140.683616,-89.609276,-3.5E-02)); +#224879 = VECTOR('',#224880,1.); +#224880 = DIRECTION('',(0.258817855668,-0.965926144996,0.)); +#224881 = ORIENTED_EDGE('',*,*,#224882,.F.); +#224882 = EDGE_CURVE('',#224883,#224875,#224885,.T.); +#224883 = VERTEX_POINT('',#224884); +#224884 = CARTESIAN_POINT('',(140.697433,-89.660842,0.)); +#224885 = LINE('',#224886,#224887); +#224886 = CARTESIAN_POINT('',(140.697433,-89.660842,0.)); +#224887 = VECTOR('',#224888,1.); +#224888 = DIRECTION('',(0.,0.,-1.)); +#224889 = ORIENTED_EDGE('',*,*,#224890,.F.); +#224890 = EDGE_CURVE('',#224852,#224883,#224891,.T.); +#224891 = LINE('',#224892,#224893); +#224892 = CARTESIAN_POINT('',(140.683616,-89.609276,0.)); +#224893 = VECTOR('',#224894,1.); +#224894 = DIRECTION('',(0.258817855668,-0.965926144996,0.)); +#224895 = PLANE('',#224896); +#224896 = AXIS2_PLACEMENT_3D('',#224897,#224898,#224899); +#224897 = CARTESIAN_POINT('',(140.683616,-89.609276,0.)); +#224898 = DIRECTION('',(-0.965926144996,-0.258817855668,-0.)); +#224899 = DIRECTION('',(0.258817855668,-0.965926144996,0.)); +#224900 = ADVANCED_FACE('',(#224901),#224928,.T.); +#224901 = FACE_BOUND('',#224902,.F.); +#224902 = EDGE_LOOP('',(#224903,#224904,#224913,#224921)); +#224903 = ORIENTED_EDGE('',*,*,#224882,.T.); +#224904 = ORIENTED_EDGE('',*,*,#224905,.T.); +#224905 = EDGE_CURVE('',#224875,#224906,#224908,.T.); +#224906 = VERTEX_POINT('',#224907); +#224907 = CARTESIAN_POINT('',(140.439158,-89.402567,-3.5E-02)); +#224908 = CIRCLE('',#224909,0.299999641111); +#224909 = AXIS2_PLACEMENT_3D('',#224910,#224911,#224912); +#224910 = CARTESIAN_POINT('',(140.39999993135,-89.70000006865,-3.5E-02) + ); +#224911 = DIRECTION('',(0.,0.,-1.)); +#224912 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#224913 = ORIENTED_EDGE('',*,*,#224914,.F.); +#224914 = EDGE_CURVE('',#224915,#224906,#224917,.T.); +#224915 = VERTEX_POINT('',#224916); +#224916 = CARTESIAN_POINT('',(140.439158,-89.402567,0.)); +#224917 = LINE('',#224918,#224919); +#224918 = CARTESIAN_POINT('',(140.439158,-89.402567,0.)); +#224919 = VECTOR('',#224920,1.); +#224920 = DIRECTION('',(0.,0.,-1.)); +#224921 = ORIENTED_EDGE('',*,*,#224922,.F.); +#224922 = EDGE_CURVE('',#224883,#224915,#224923,.T.); +#224923 = CIRCLE('',#224924,0.299999641111); +#224924 = AXIS2_PLACEMENT_3D('',#224925,#224926,#224927); +#224925 = CARTESIAN_POINT('',(140.39999993135,-89.70000006865,0.)); +#224926 = DIRECTION('',(0.,0.,-1.)); +#224927 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#224928 = CYLINDRICAL_SURFACE('',#224929,0.299999641111); +#224929 = AXIS2_PLACEMENT_3D('',#224930,#224931,#224932); +#224930 = CARTESIAN_POINT('',(140.39999993135,-89.70000006865,0.)); +#224931 = DIRECTION('',(-0.,-0.,1.)); +#224932 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#224933 = ADVANCED_FACE('',(#224934),#224959,.F.); +#224934 = FACE_BOUND('',#224935,.F.); +#224935 = EDGE_LOOP('',(#224936,#224937,#224945,#224953)); +#224936 = ORIENTED_EDGE('',*,*,#224914,.T.); +#224937 = ORIENTED_EDGE('',*,*,#224938,.T.); +#224938 = EDGE_CURVE('',#224906,#224939,#224941,.T.); +#224939 = VERTEX_POINT('',#224940); +#224940 = CARTESIAN_POINT('',(140.460376,-89.408252,-3.5E-02)); +#224941 = LINE('',#224942,#224943); +#224942 = CARTESIAN_POINT('',(140.439158,-89.402567,-3.5E-02)); +#224943 = VECTOR('',#224944,1.); +#224944 = DIRECTION('',(0.965929763611,-0.258804350369,0.)); +#224945 = ORIENTED_EDGE('',*,*,#224946,.F.); +#224946 = EDGE_CURVE('',#224947,#224939,#224949,.T.); +#224947 = VERTEX_POINT('',#224948); +#224948 = CARTESIAN_POINT('',(140.460376,-89.408252,0.)); +#224949 = LINE('',#224950,#224951); +#224950 = CARTESIAN_POINT('',(140.460376,-89.408252,0.)); +#224951 = VECTOR('',#224952,1.); +#224952 = DIRECTION('',(0.,0.,-1.)); +#224953 = ORIENTED_EDGE('',*,*,#224954,.F.); +#224954 = EDGE_CURVE('',#224915,#224947,#224955,.T.); +#224955 = LINE('',#224956,#224957); +#224956 = CARTESIAN_POINT('',(140.439158,-89.402567,0.)); +#224957 = VECTOR('',#224958,1.); +#224958 = DIRECTION('',(0.965929763611,-0.258804350369,0.)); +#224959 = PLANE('',#224960); +#224960 = AXIS2_PLACEMENT_3D('',#224961,#224962,#224963); +#224961 = CARTESIAN_POINT('',(140.439158,-89.402567,0.)); +#224962 = DIRECTION('',(-0.258804350369,-0.965929763611,-0.)); +#224963 = DIRECTION('',(0.965929763611,-0.258804350369,0.)); +#224964 = ADVANCED_FACE('',(#224965),#224990,.F.); +#224965 = FACE_BOUND('',#224966,.F.); +#224966 = EDGE_LOOP('',(#224967,#224968,#224976,#224984)); +#224967 = ORIENTED_EDGE('',*,*,#224946,.T.); +#224968 = ORIENTED_EDGE('',*,*,#224969,.T.); +#224969 = EDGE_CURVE('',#224939,#224970,#224972,.T.); +#224970 = VERTEX_POINT('',#224971); +#224971 = CARTESIAN_POINT('',(144.,-85.868629,-3.5E-02)); +#224972 = LINE('',#224973,#224974); +#224973 = CARTESIAN_POINT('',(140.460376,-89.408252,-3.5E-02)); +#224974 = VECTOR('',#224975,1.); +#224975 = DIRECTION('',(0.707106881071,0.707106681302,0.)); +#224976 = ORIENTED_EDGE('',*,*,#224977,.F.); +#224977 = EDGE_CURVE('',#224978,#224970,#224980,.T.); +#224978 = VERTEX_POINT('',#224979); +#224979 = CARTESIAN_POINT('',(144.,-85.868629,0.)); +#224980 = LINE('',#224981,#224982); +#224981 = CARTESIAN_POINT('',(144.,-85.868629,0.)); +#224982 = VECTOR('',#224983,1.); +#224983 = DIRECTION('',(0.,0.,-1.)); +#224984 = ORIENTED_EDGE('',*,*,#224985,.F.); +#224985 = EDGE_CURVE('',#224947,#224978,#224986,.T.); +#224986 = LINE('',#224987,#224988); +#224987 = CARTESIAN_POINT('',(140.460376,-89.408252,0.)); +#224988 = VECTOR('',#224989,1.); +#224989 = DIRECTION('',(0.707106881071,0.707106681302,0.)); +#224990 = PLANE('',#224991); +#224991 = AXIS2_PLACEMENT_3D('',#224992,#224993,#224994); +#224992 = CARTESIAN_POINT('',(140.460376,-89.408252,0.)); +#224993 = DIRECTION('',(0.707106681302,-0.707106881071,0.)); +#224994 = DIRECTION('',(0.707106881071,0.707106681302,0.)); +#224995 = ADVANCED_FACE('',(#224996),#225021,.F.); +#224996 = FACE_BOUND('',#224997,.F.); +#224997 = EDGE_LOOP('',(#224998,#224999,#225007,#225015)); +#224998 = ORIENTED_EDGE('',*,*,#224977,.T.); +#224999 = ORIENTED_EDGE('',*,*,#225000,.T.); +#225000 = EDGE_CURVE('',#224970,#225001,#225003,.T.); +#225001 = VERTEX_POINT('',#225002); +#225002 = CARTESIAN_POINT('',(144.,-80.697057,-3.5E-02)); +#225003 = LINE('',#225004,#225005); +#225004 = CARTESIAN_POINT('',(144.,-85.868629,-3.5E-02)); +#225005 = VECTOR('',#225006,1.); +#225006 = DIRECTION('',(0.,1.,0.)); +#225007 = ORIENTED_EDGE('',*,*,#225008,.F.); +#225008 = EDGE_CURVE('',#225009,#225001,#225011,.T.); +#225009 = VERTEX_POINT('',#225010); +#225010 = CARTESIAN_POINT('',(144.,-80.697057,0.)); +#225011 = LINE('',#225012,#225013); +#225012 = CARTESIAN_POINT('',(144.,-80.697057,0.)); +#225013 = VECTOR('',#225014,1.); +#225014 = DIRECTION('',(0.,0.,-1.)); +#225015 = ORIENTED_EDGE('',*,*,#225016,.F.); +#225016 = EDGE_CURVE('',#224978,#225009,#225017,.T.); +#225017 = LINE('',#225018,#225019); +#225018 = CARTESIAN_POINT('',(144.,-85.868629,0.)); +#225019 = VECTOR('',#225020,1.); +#225020 = DIRECTION('',(0.,1.,0.)); +#225021 = PLANE('',#225022); +#225022 = AXIS2_PLACEMENT_3D('',#225023,#225024,#225025); +#225023 = CARTESIAN_POINT('',(144.,-85.868629,0.)); +#225024 = DIRECTION('',(1.,-0.,0.)); +#225025 = DIRECTION('',(0.,1.,0.)); +#225026 = ADVANCED_FACE('',(#225027),#225052,.F.); +#225027 = FACE_BOUND('',#225028,.F.); +#225028 = EDGE_LOOP('',(#225029,#225030,#225038,#225046)); +#225029 = ORIENTED_EDGE('',*,*,#225008,.T.); +#225030 = ORIENTED_EDGE('',*,*,#225031,.T.); +#225031 = EDGE_CURVE('',#225001,#225032,#225034,.T.); +#225032 = VERTEX_POINT('',#225033); +#225033 = CARTESIAN_POINT('',(143.759592,-80.452573,-3.5E-02)); +#225034 = LINE('',#225035,#225036); +#225035 = CARTESIAN_POINT('',(144.,-80.697057,-3.5E-02)); +#225036 = VECTOR('',#225037,1.); +#225037 = DIRECTION('',(-0.701138073685,0.713025526633,0.)); +#225038 = ORIENTED_EDGE('',*,*,#225039,.F.); +#225039 = EDGE_CURVE('',#225040,#225032,#225042,.T.); +#225040 = VERTEX_POINT('',#225041); +#225041 = CARTESIAN_POINT('',(143.759592,-80.452573,0.)); +#225042 = LINE('',#225043,#225044); +#225043 = CARTESIAN_POINT('',(143.759592,-80.452573,0.)); +#225044 = VECTOR('',#225045,1.); +#225045 = DIRECTION('',(0.,0.,-1.)); +#225046 = ORIENTED_EDGE('',*,*,#225047,.F.); +#225047 = EDGE_CURVE('',#225009,#225040,#225048,.T.); +#225048 = LINE('',#225049,#225050); +#225049 = CARTESIAN_POINT('',(144.,-80.697057,0.)); +#225050 = VECTOR('',#225051,1.); +#225051 = DIRECTION('',(-0.701138073685,0.713025526633,0.)); +#225052 = PLANE('',#225053); +#225053 = AXIS2_PLACEMENT_3D('',#225054,#225055,#225056); +#225054 = CARTESIAN_POINT('',(144.,-80.697057,0.)); +#225055 = DIRECTION('',(0.713025526633,0.701138073685,0.)); +#225056 = DIRECTION('',(-0.701138073685,0.713025526633,0.)); +#225057 = ADVANCED_FACE('',(#225058),#225083,.F.); +#225058 = FACE_BOUND('',#225059,.F.); +#225059 = EDGE_LOOP('',(#225060,#225061,#225069,#225077)); +#225060 = ORIENTED_EDGE('',*,*,#225039,.T.); +#225061 = ORIENTED_EDGE('',*,*,#225062,.T.); +#225062 = EDGE_CURVE('',#225032,#225063,#225065,.T.); +#225063 = VERTEX_POINT('',#225064); +#225064 = CARTESIAN_POINT('',(143.737195,-80.398501,-3.5E-02)); +#225065 = LINE('',#225066,#225067); +#225066 = CARTESIAN_POINT('',(143.759592,-80.452573,-3.5E-02)); +#225067 = VECTOR('',#225068,1.); +#225068 = DIRECTION('',(-0.382678244203,0.923881681501,0.)); +#225069 = ORIENTED_EDGE('',*,*,#225070,.F.); +#225070 = EDGE_CURVE('',#225071,#225063,#225073,.T.); +#225071 = VERTEX_POINT('',#225072); +#225072 = CARTESIAN_POINT('',(143.737195,-80.398501,0.)); +#225073 = LINE('',#225074,#225075); +#225074 = CARTESIAN_POINT('',(143.737195,-80.398501,0.)); +#225075 = VECTOR('',#225076,1.); +#225076 = DIRECTION('',(0.,0.,-1.)); +#225077 = ORIENTED_EDGE('',*,*,#225078,.F.); +#225078 = EDGE_CURVE('',#225040,#225071,#225079,.T.); +#225079 = LINE('',#225080,#225081); +#225080 = CARTESIAN_POINT('',(143.759592,-80.452573,0.)); +#225081 = VECTOR('',#225082,1.); +#225082 = DIRECTION('',(-0.382678244203,0.923881681501,0.)); +#225083 = PLANE('',#225084); +#225084 = AXIS2_PLACEMENT_3D('',#225085,#225086,#225087); +#225085 = CARTESIAN_POINT('',(143.759592,-80.452573,0.)); +#225086 = DIRECTION('',(0.923881681501,0.382678244203,0.)); +#225087 = DIRECTION('',(-0.382678244203,0.923881681501,0.)); +#225088 = ADVANCED_FACE('',(#225089),#225114,.F.); +#225089 = FACE_BOUND('',#225090,.F.); +#225090 = EDGE_LOOP('',(#225091,#225092,#225100,#225108)); +#225091 = ORIENTED_EDGE('',*,*,#225070,.T.); +#225092 = ORIENTED_EDGE('',*,*,#225093,.T.); +#225093 = EDGE_CURVE('',#225063,#225094,#225096,.T.); +#225094 = VERTEX_POINT('',#225095); +#225095 = CARTESIAN_POINT('',(143.737195,-79.470124,-3.5E-02)); +#225096 = LINE('',#225097,#225098); +#225097 = CARTESIAN_POINT('',(143.737195,-80.398501,-3.5E-02)); +#225098 = VECTOR('',#225099,1.); +#225099 = DIRECTION('',(0.,1.,0.)); +#225100 = ORIENTED_EDGE('',*,*,#225101,.F.); +#225101 = EDGE_CURVE('',#225102,#225094,#225104,.T.); +#225102 = VERTEX_POINT('',#225103); +#225103 = CARTESIAN_POINT('',(143.737195,-79.470124,0.)); +#225104 = LINE('',#225105,#225106); +#225105 = CARTESIAN_POINT('',(143.737195,-79.470124,0.)); +#225106 = VECTOR('',#225107,1.); +#225107 = DIRECTION('',(0.,0.,-1.)); +#225108 = ORIENTED_EDGE('',*,*,#225109,.F.); +#225109 = EDGE_CURVE('',#225071,#225102,#225110,.T.); +#225110 = LINE('',#225111,#225112); +#225111 = CARTESIAN_POINT('',(143.737195,-80.398501,0.)); +#225112 = VECTOR('',#225113,1.); +#225113 = DIRECTION('',(0.,1.,0.)); +#225114 = PLANE('',#225115); +#225115 = AXIS2_PLACEMENT_3D('',#225116,#225117,#225118); +#225116 = CARTESIAN_POINT('',(143.737195,-80.398501,0.)); +#225117 = DIRECTION('',(1.,-0.,0.)); +#225118 = DIRECTION('',(0.,1.,0.)); +#225119 = ADVANCED_FACE('',(#225120),#225145,.F.); +#225120 = FACE_BOUND('',#225121,.F.); +#225121 = EDGE_LOOP('',(#225122,#225123,#225131,#225139)); +#225122 = ORIENTED_EDGE('',*,*,#225101,.T.); +#225123 = ORIENTED_EDGE('',*,*,#225124,.T.); +#225124 = EDGE_CURVE('',#225094,#225125,#225127,.T.); +#225125 = VERTEX_POINT('',#225126); +#225126 = CARTESIAN_POINT('',(143.759592,-79.416053,-3.5E-02)); +#225127 = LINE('',#225128,#225129); +#225128 = CARTESIAN_POINT('',(143.737195,-79.470124,-3.5E-02)); +#225129 = VECTOR('',#225130,1.); +#225130 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225131 = ORIENTED_EDGE('',*,*,#225132,.F.); +#225132 = EDGE_CURVE('',#225133,#225125,#225135,.T.); +#225133 = VERTEX_POINT('',#225134); +#225134 = CARTESIAN_POINT('',(143.759592,-79.416053,0.)); +#225135 = LINE('',#225136,#225137); +#225136 = CARTESIAN_POINT('',(143.759592,-79.416053,0.)); +#225137 = VECTOR('',#225138,1.); +#225138 = DIRECTION('',(0.,0.,-1.)); +#225139 = ORIENTED_EDGE('',*,*,#225140,.F.); +#225140 = EDGE_CURVE('',#225102,#225133,#225141,.T.); +#225141 = LINE('',#225142,#225143); +#225142 = CARTESIAN_POINT('',(143.737195,-79.470124,0.)); +#225143 = VECTOR('',#225144,1.); +#225144 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225145 = PLANE('',#225146); +#225146 = AXIS2_PLACEMENT_3D('',#225147,#225148,#225149); +#225147 = CARTESIAN_POINT('',(143.737195,-79.470124,0.)); +#225148 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#225149 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225150 = ADVANCED_FACE('',(#225151),#225176,.F.); +#225151 = FACE_BOUND('',#225152,.F.); +#225152 = EDGE_LOOP('',(#225153,#225154,#225162,#225170)); +#225153 = ORIENTED_EDGE('',*,*,#225132,.T.); +#225154 = ORIENTED_EDGE('',*,*,#225155,.T.); +#225155 = EDGE_CURVE('',#225125,#225156,#225158,.T.); +#225156 = VERTEX_POINT('',#225157); +#225157 = CARTESIAN_POINT('',(143.9,-79.271569,-3.5E-02)); +#225158 = LINE('',#225159,#225160); +#225159 = CARTESIAN_POINT('',(143.759592,-79.416053,-3.5E-02)); +#225160 = VECTOR('',#225161,1.); +#225161 = DIRECTION('',(0.696918755638,0.717150087527,0.)); +#225162 = ORIENTED_EDGE('',*,*,#225163,.F.); +#225163 = EDGE_CURVE('',#225164,#225156,#225166,.T.); +#225164 = VERTEX_POINT('',#225165); +#225165 = CARTESIAN_POINT('',(143.9,-79.271569,0.)); +#225166 = LINE('',#225167,#225168); +#225167 = CARTESIAN_POINT('',(143.9,-79.271569,0.)); +#225168 = VECTOR('',#225169,1.); +#225169 = DIRECTION('',(0.,0.,-1.)); +#225170 = ORIENTED_EDGE('',*,*,#225171,.F.); +#225171 = EDGE_CURVE('',#225133,#225164,#225172,.T.); +#225172 = LINE('',#225173,#225174); +#225173 = CARTESIAN_POINT('',(143.759592,-79.416053,0.)); +#225174 = VECTOR('',#225175,1.); +#225175 = DIRECTION('',(0.696918755638,0.717150087527,0.)); +#225176 = PLANE('',#225177); +#225177 = AXIS2_PLACEMENT_3D('',#225178,#225179,#225180); +#225178 = CARTESIAN_POINT('',(143.759592,-79.416053,0.)); +#225179 = DIRECTION('',(0.717150087527,-0.696918755638,0.)); +#225180 = DIRECTION('',(0.696918755638,0.717150087527,0.)); +#225181 = ADVANCED_FACE('',(#225182),#225207,.F.); +#225182 = FACE_BOUND('',#225183,.F.); +#225183 = EDGE_LOOP('',(#225184,#225185,#225193,#225201)); +#225184 = ORIENTED_EDGE('',*,*,#225163,.T.); +#225185 = ORIENTED_EDGE('',*,*,#225186,.T.); +#225186 = EDGE_CURVE('',#225156,#225187,#225189,.T.); +#225187 = VERTEX_POINT('',#225188); +#225188 = CARTESIAN_POINT('',(143.902882,-78.78434,-3.5E-02)); +#225189 = LINE('',#225190,#225191); +#225190 = CARTESIAN_POINT('',(143.9,-79.271569,-3.5E-02)); +#225191 = VECTOR('',#225192,1.); +#225192 = DIRECTION('',(5.914979574934E-03,0.999982506355,0.)); +#225193 = ORIENTED_EDGE('',*,*,#225194,.F.); +#225194 = EDGE_CURVE('',#225195,#225187,#225197,.T.); +#225195 = VERTEX_POINT('',#225196); +#225196 = CARTESIAN_POINT('',(143.902882,-78.78434,0.)); +#225197 = LINE('',#225198,#225199); +#225198 = CARTESIAN_POINT('',(143.902882,-78.78434,0.)); +#225199 = VECTOR('',#225200,1.); +#225200 = DIRECTION('',(0.,0.,-1.)); +#225201 = ORIENTED_EDGE('',*,*,#225202,.F.); +#225202 = EDGE_CURVE('',#225164,#225195,#225203,.T.); +#225203 = LINE('',#225204,#225205); +#225204 = CARTESIAN_POINT('',(143.9,-79.271569,0.)); +#225205 = VECTOR('',#225206,1.); +#225206 = DIRECTION('',(5.914979574934E-03,0.999982506355,0.)); +#225207 = PLANE('',#225208); +#225208 = AXIS2_PLACEMENT_3D('',#225209,#225210,#225211); +#225209 = CARTESIAN_POINT('',(143.9,-79.271569,0.)); +#225210 = DIRECTION('',(0.999982506355,-5.914979574934E-03,0.)); +#225211 = DIRECTION('',(5.914979574934E-03,0.999982506355,0.)); +#225212 = ADVANCED_FACE('',(#225213),#225238,.F.); +#225213 = FACE_BOUND('',#225214,.F.); +#225214 = EDGE_LOOP('',(#225215,#225216,#225224,#225232)); +#225215 = ORIENTED_EDGE('',*,*,#225194,.T.); +#225216 = ORIENTED_EDGE('',*,*,#225217,.T.); +#225217 = EDGE_CURVE('',#225187,#225218,#225220,.T.); +#225218 = VERTEX_POINT('',#225219); +#225219 = CARTESIAN_POINT('',(143.925279,-78.730269,-3.5E-02)); +#225220 = LINE('',#225221,#225222); +#225221 = CARTESIAN_POINT('',(143.902882,-78.78434,-3.5E-02)); +#225222 = VECTOR('',#225223,1.); +#225223 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225224 = ORIENTED_EDGE('',*,*,#225225,.F.); +#225225 = EDGE_CURVE('',#225226,#225218,#225228,.T.); +#225226 = VERTEX_POINT('',#225227); +#225227 = CARTESIAN_POINT('',(143.925279,-78.730269,0.)); +#225228 = LINE('',#225229,#225230); +#225229 = CARTESIAN_POINT('',(143.925279,-78.730269,0.)); +#225230 = VECTOR('',#225231,1.); +#225231 = DIRECTION('',(0.,0.,-1.)); +#225232 = ORIENTED_EDGE('',*,*,#225233,.F.); +#225233 = EDGE_CURVE('',#225195,#225226,#225234,.T.); +#225234 = LINE('',#225235,#225236); +#225235 = CARTESIAN_POINT('',(143.902882,-78.78434,0.)); +#225236 = VECTOR('',#225237,1.); +#225237 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225238 = PLANE('',#225239); +#225239 = AXIS2_PLACEMENT_3D('',#225240,#225241,#225242); +#225240 = CARTESIAN_POINT('',(143.902882,-78.78434,0.)); +#225241 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#225242 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225243 = ADVANCED_FACE('',(#225244),#225269,.F.); +#225244 = FACE_BOUND('',#225245,.F.); +#225245 = EDGE_LOOP('',(#225246,#225247,#225255,#225263)); +#225246 = ORIENTED_EDGE('',*,*,#225225,.T.); +#225247 = ORIENTED_EDGE('',*,*,#225248,.T.); +#225248 = EDGE_CURVE('',#225218,#225249,#225251,.T.); +#225249 = VERTEX_POINT('',#225250); +#225250 = CARTESIAN_POINT('',(144.2,-78.451472,-3.5E-02)); +#225251 = LINE('',#225252,#225253); +#225252 = CARTESIAN_POINT('',(143.925279,-78.730269,-3.5E-02)); +#225253 = VECTOR('',#225254,1.); +#225254 = DIRECTION('',(0.701880753252,0.712294467348,0.)); +#225255 = ORIENTED_EDGE('',*,*,#225256,.F.); +#225256 = EDGE_CURVE('',#225257,#225249,#225259,.T.); +#225257 = VERTEX_POINT('',#225258); +#225258 = CARTESIAN_POINT('',(144.2,-78.451472,0.)); +#225259 = LINE('',#225260,#225261); +#225260 = CARTESIAN_POINT('',(144.2,-78.451472,0.)); +#225261 = VECTOR('',#225262,1.); +#225262 = DIRECTION('',(0.,0.,-1.)); +#225263 = ORIENTED_EDGE('',*,*,#225264,.F.); +#225264 = EDGE_CURVE('',#225226,#225257,#225265,.T.); +#225265 = LINE('',#225266,#225267); +#225266 = CARTESIAN_POINT('',(143.925279,-78.730269,0.)); +#225267 = VECTOR('',#225268,1.); +#225268 = DIRECTION('',(0.701880753252,0.712294467348,0.)); +#225269 = PLANE('',#225270); +#225270 = AXIS2_PLACEMENT_3D('',#225271,#225272,#225273); +#225271 = CARTESIAN_POINT('',(143.925279,-78.730269,0.)); +#225272 = DIRECTION('',(0.712294467348,-0.701880753252,0.)); +#225273 = DIRECTION('',(0.701880753252,0.712294467348,0.)); +#225274 = ADVANCED_FACE('',(#225275),#225300,.F.); +#225275 = FACE_BOUND('',#225276,.F.); +#225276 = EDGE_LOOP('',(#225277,#225278,#225286,#225294)); +#225277 = ORIENTED_EDGE('',*,*,#225256,.T.); +#225278 = ORIENTED_EDGE('',*,*,#225279,.T.); +#225279 = EDGE_CURVE('',#225249,#225280,#225282,.T.); +#225280 = VERTEX_POINT('',#225281); +#225281 = CARTESIAN_POINT('',(144.202882,-78.201497,-3.5E-02)); +#225282 = LINE('',#225283,#225284); +#225283 = CARTESIAN_POINT('',(144.2,-78.451472,-3.5E-02)); +#225284 = VECTOR('',#225285,1.); +#225285 = DIRECTION('',(1.152838675629E-02,0.999933545941,0.)); +#225286 = ORIENTED_EDGE('',*,*,#225287,.F.); +#225287 = EDGE_CURVE('',#225288,#225280,#225290,.T.); +#225288 = VERTEX_POINT('',#225289); +#225289 = CARTESIAN_POINT('',(144.202882,-78.201497,0.)); +#225290 = LINE('',#225291,#225292); +#225291 = CARTESIAN_POINT('',(144.202882,-78.201497,0.)); +#225292 = VECTOR('',#225293,1.); +#225293 = DIRECTION('',(0.,0.,-1.)); +#225294 = ORIENTED_EDGE('',*,*,#225295,.F.); +#225295 = EDGE_CURVE('',#225257,#225288,#225296,.T.); +#225296 = LINE('',#225297,#225298); +#225297 = CARTESIAN_POINT('',(144.2,-78.451472,0.)); +#225298 = VECTOR('',#225299,1.); +#225299 = DIRECTION('',(1.152838675629E-02,0.999933545941,0.)); +#225300 = PLANE('',#225301); +#225301 = AXIS2_PLACEMENT_3D('',#225302,#225303,#225304); +#225302 = CARTESIAN_POINT('',(144.2,-78.451472,0.)); +#225303 = DIRECTION('',(0.999933545941,-1.152838675629E-02,0.)); +#225304 = DIRECTION('',(1.152838675629E-02,0.999933545941,0.)); +#225305 = ADVANCED_FACE('',(#225306),#225331,.F.); +#225306 = FACE_BOUND('',#225307,.F.); +#225307 = EDGE_LOOP('',(#225308,#225309,#225317,#225325)); +#225308 = ORIENTED_EDGE('',*,*,#225287,.T.); +#225309 = ORIENTED_EDGE('',*,*,#225310,.T.); +#225310 = EDGE_CURVE('',#225280,#225311,#225313,.T.); +#225311 = VERTEX_POINT('',#225312); +#225312 = CARTESIAN_POINT('',(144.225279,-78.147426,-3.5E-02)); +#225313 = LINE('',#225314,#225315); +#225314 = CARTESIAN_POINT('',(144.202882,-78.201497,-3.5E-02)); +#225315 = VECTOR('',#225316,1.); +#225316 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225317 = ORIENTED_EDGE('',*,*,#225318,.F.); +#225318 = EDGE_CURVE('',#225319,#225311,#225321,.T.); +#225319 = VERTEX_POINT('',#225320); +#225320 = CARTESIAN_POINT('',(144.225279,-78.147426,0.)); +#225321 = LINE('',#225322,#225323); +#225322 = CARTESIAN_POINT('',(144.225279,-78.147426,0.)); +#225323 = VECTOR('',#225324,1.); +#225324 = DIRECTION('',(0.,0.,-1.)); +#225325 = ORIENTED_EDGE('',*,*,#225326,.F.); +#225326 = EDGE_CURVE('',#225288,#225319,#225327,.T.); +#225327 = LINE('',#225328,#225329); +#225328 = CARTESIAN_POINT('',(144.202882,-78.201497,0.)); +#225329 = VECTOR('',#225330,1.); +#225330 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225331 = PLANE('',#225332); +#225332 = AXIS2_PLACEMENT_3D('',#225333,#225334,#225335); +#225333 = CARTESIAN_POINT('',(144.202882,-78.201497,0.)); +#225334 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#225335 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225336 = ADVANCED_FACE('',(#225337),#225362,.F.); +#225337 = FACE_BOUND('',#225338,.F.); +#225338 = EDGE_LOOP('',(#225339,#225340,#225348,#225356)); +#225339 = ORIENTED_EDGE('',*,*,#225318,.T.); +#225340 = ORIENTED_EDGE('',*,*,#225341,.T.); +#225341 = EDGE_CURVE('',#225311,#225342,#225344,.T.); +#225342 = VERTEX_POINT('',#225343); +#225343 = CARTESIAN_POINT('',(144.25,-78.118629,-3.5E-02)); +#225344 = LINE('',#225345,#225346); +#225345 = CARTESIAN_POINT('',(144.225279,-78.147426,-3.5E-02)); +#225346 = VECTOR('',#225347,1.); +#225347 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225348 = ORIENTED_EDGE('',*,*,#225349,.F.); +#225349 = EDGE_CURVE('',#225350,#225342,#225352,.T.); +#225350 = VERTEX_POINT('',#225351); +#225351 = CARTESIAN_POINT('',(144.25,-78.118629,0.)); +#225352 = LINE('',#225353,#225354); +#225353 = CARTESIAN_POINT('',(144.25,-78.118629,0.)); +#225354 = VECTOR('',#225355,1.); +#225355 = DIRECTION('',(0.,0.,-1.)); +#225356 = ORIENTED_EDGE('',*,*,#225357,.F.); +#225357 = EDGE_CURVE('',#225319,#225350,#225358,.T.); +#225358 = LINE('',#225359,#225360); +#225359 = CARTESIAN_POINT('',(144.225279,-78.147426,0.)); +#225360 = VECTOR('',#225361,1.); +#225361 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225362 = PLANE('',#225363); +#225363 = AXIS2_PLACEMENT_3D('',#225364,#225365,#225366); +#225364 = CARTESIAN_POINT('',(144.225279,-78.147426,0.)); +#225365 = DIRECTION('',(0.75876350894,-0.651366208442,0.)); +#225366 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225367 = ADVANCED_FACE('',(#225368),#225393,.F.); +#225368 = FACE_BOUND('',#225369,.F.); +#225369 = EDGE_LOOP('',(#225370,#225371,#225379,#225387)); +#225370 = ORIENTED_EDGE('',*,*,#225349,.T.); +#225371 = ORIENTED_EDGE('',*,*,#225372,.T.); +#225372 = EDGE_CURVE('',#225342,#225373,#225375,.T.); +#225373 = VERTEX_POINT('',#225374); +#225374 = CARTESIAN_POINT('',(144.25,-77.381371,-3.5E-02)); +#225375 = LINE('',#225376,#225377); +#225376 = CARTESIAN_POINT('',(144.25,-78.118629,-3.5E-02)); +#225377 = VECTOR('',#225378,1.); +#225378 = DIRECTION('',(0.,1.,0.)); +#225379 = ORIENTED_EDGE('',*,*,#225380,.F.); +#225380 = EDGE_CURVE('',#225381,#225373,#225383,.T.); +#225381 = VERTEX_POINT('',#225382); +#225382 = CARTESIAN_POINT('',(144.25,-77.381371,0.)); +#225383 = LINE('',#225384,#225385); +#225384 = CARTESIAN_POINT('',(144.25,-77.381371,0.)); +#225385 = VECTOR('',#225386,1.); +#225386 = DIRECTION('',(0.,0.,-1.)); +#225387 = ORIENTED_EDGE('',*,*,#225388,.F.); +#225388 = EDGE_CURVE('',#225350,#225381,#225389,.T.); +#225389 = LINE('',#225390,#225391); +#225390 = CARTESIAN_POINT('',(144.25,-78.118629,0.)); +#225391 = VECTOR('',#225392,1.); +#225392 = DIRECTION('',(0.,1.,0.)); +#225393 = PLANE('',#225394); +#225394 = AXIS2_PLACEMENT_3D('',#225395,#225396,#225397); +#225395 = CARTESIAN_POINT('',(144.25,-78.118629,0.)); +#225396 = DIRECTION('',(1.,-0.,0.)); +#225397 = DIRECTION('',(0.,1.,0.)); +#225398 = ADVANCED_FACE('',(#225399),#225424,.F.); +#225399 = FACE_BOUND('',#225400,.F.); +#225400 = EDGE_LOOP('',(#225401,#225402,#225410,#225418)); +#225401 = ORIENTED_EDGE('',*,*,#225380,.T.); +#225402 = ORIENTED_EDGE('',*,*,#225403,.T.); +#225403 = EDGE_CURVE('',#225373,#225404,#225406,.T.); +#225404 = VERTEX_POINT('',#225405); +#225405 = CARTESIAN_POINT('',(144.225279,-77.352574,-3.5E-02)); +#225406 = LINE('',#225407,#225408); +#225407 = CARTESIAN_POINT('',(144.25,-77.381371,-3.5E-02)); +#225408 = VECTOR('',#225409,1.); +#225409 = DIRECTION('',(-0.651366208442,0.75876350894,0.)); +#225410 = ORIENTED_EDGE('',*,*,#225411,.F.); +#225411 = EDGE_CURVE('',#225412,#225404,#225414,.T.); +#225412 = VERTEX_POINT('',#225413); +#225413 = CARTESIAN_POINT('',(144.225279,-77.352574,0.)); +#225414 = LINE('',#225415,#225416); +#225415 = CARTESIAN_POINT('',(144.225279,-77.352574,0.)); +#225416 = VECTOR('',#225417,1.); +#225417 = DIRECTION('',(0.,0.,-1.)); +#225418 = ORIENTED_EDGE('',*,*,#225419,.F.); +#225419 = EDGE_CURVE('',#225381,#225412,#225420,.T.); +#225420 = LINE('',#225421,#225422); +#225421 = CARTESIAN_POINT('',(144.25,-77.381371,0.)); +#225422 = VECTOR('',#225423,1.); +#225423 = DIRECTION('',(-0.651366208442,0.75876350894,0.)); +#225424 = PLANE('',#225425); +#225425 = AXIS2_PLACEMENT_3D('',#225426,#225427,#225428); +#225426 = CARTESIAN_POINT('',(144.25,-77.381371,0.)); +#225427 = DIRECTION('',(0.75876350894,0.651366208442,0.)); +#225428 = DIRECTION('',(-0.651366208442,0.75876350894,0.)); +#225429 = ADVANCED_FACE('',(#225430),#225455,.F.); +#225430 = FACE_BOUND('',#225431,.F.); +#225431 = EDGE_LOOP('',(#225432,#225433,#225441,#225449)); +#225432 = ORIENTED_EDGE('',*,*,#225411,.T.); +#225433 = ORIENTED_EDGE('',*,*,#225434,.T.); +#225434 = EDGE_CURVE('',#225404,#225435,#225437,.T.); +#225435 = VERTEX_POINT('',#225436); +#225436 = CARTESIAN_POINT('',(144.202882,-77.298502,-3.5E-02)); +#225437 = LINE('',#225438,#225439); +#225438 = CARTESIAN_POINT('',(144.225279,-77.352574,-3.5E-02)); +#225439 = VECTOR('',#225440,1.); +#225440 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#225441 = ORIENTED_EDGE('',*,*,#225442,.F.); +#225442 = EDGE_CURVE('',#225443,#225435,#225445,.T.); +#225443 = VERTEX_POINT('',#225444); +#225444 = CARTESIAN_POINT('',(144.202882,-77.298502,0.)); +#225445 = LINE('',#225446,#225447); +#225446 = CARTESIAN_POINT('',(144.202882,-77.298502,0.)); +#225447 = VECTOR('',#225448,1.); +#225448 = DIRECTION('',(0.,0.,-1.)); +#225449 = ORIENTED_EDGE('',*,*,#225450,.F.); +#225450 = EDGE_CURVE('',#225412,#225443,#225451,.T.); +#225451 = LINE('',#225452,#225453); +#225452 = CARTESIAN_POINT('',(144.225279,-77.352574,0.)); +#225453 = VECTOR('',#225454,1.); +#225454 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#225455 = PLANE('',#225456); +#225456 = AXIS2_PLACEMENT_3D('',#225457,#225458,#225459); +#225457 = CARTESIAN_POINT('',(144.225279,-77.352574,0.)); +#225458 = DIRECTION('',(0.923881681501,0.382678244204,0.)); +#225459 = DIRECTION('',(-0.382678244204,0.923881681501,0.)); +#225460 = ADVANCED_FACE('',(#225461),#225486,.F.); +#225461 = FACE_BOUND('',#225462,.F.); +#225462 = EDGE_LOOP('',(#225463,#225464,#225472,#225480)); +#225463 = ORIENTED_EDGE('',*,*,#225442,.T.); +#225464 = ORIENTED_EDGE('',*,*,#225465,.T.); +#225465 = EDGE_CURVE('',#225435,#225466,#225468,.T.); +#225466 = VERTEX_POINT('',#225467); +#225467 = CARTESIAN_POINT('',(144.202882,-76.701497,-3.5E-02)); +#225468 = LINE('',#225469,#225470); +#225469 = CARTESIAN_POINT('',(144.202882,-77.298502,-3.5E-02)); +#225470 = VECTOR('',#225471,1.); +#225471 = DIRECTION('',(0.,1.,0.)); +#225472 = ORIENTED_EDGE('',*,*,#225473,.F.); +#225473 = EDGE_CURVE('',#225474,#225466,#225476,.T.); +#225474 = VERTEX_POINT('',#225475); +#225475 = CARTESIAN_POINT('',(144.202882,-76.701497,0.)); +#225476 = LINE('',#225477,#225478); +#225477 = CARTESIAN_POINT('',(144.202882,-76.701497,0.)); +#225478 = VECTOR('',#225479,1.); +#225479 = DIRECTION('',(0.,0.,-1.)); +#225480 = ORIENTED_EDGE('',*,*,#225481,.F.); +#225481 = EDGE_CURVE('',#225443,#225474,#225482,.T.); +#225482 = LINE('',#225483,#225484); +#225483 = CARTESIAN_POINT('',(144.202882,-77.298502,0.)); +#225484 = VECTOR('',#225485,1.); +#225485 = DIRECTION('',(0.,1.,0.)); +#225486 = PLANE('',#225487); +#225487 = AXIS2_PLACEMENT_3D('',#225488,#225489,#225490); +#225488 = CARTESIAN_POINT('',(144.202882,-77.298502,0.)); +#225489 = DIRECTION('',(1.,-0.,0.)); +#225490 = DIRECTION('',(0.,1.,0.)); +#225491 = ADVANCED_FACE('',(#225492),#225517,.F.); +#225492 = FACE_BOUND('',#225493,.F.); +#225493 = EDGE_LOOP('',(#225494,#225495,#225503,#225511)); +#225494 = ORIENTED_EDGE('',*,*,#225473,.T.); +#225495 = ORIENTED_EDGE('',*,*,#225496,.T.); +#225496 = EDGE_CURVE('',#225466,#225497,#225499,.T.); +#225497 = VERTEX_POINT('',#225498); +#225498 = CARTESIAN_POINT('',(144.225279,-76.647426,-3.5E-02)); +#225499 = LINE('',#225500,#225501); +#225500 = CARTESIAN_POINT('',(144.202882,-76.701497,-3.5E-02)); +#225501 = VECTOR('',#225502,1.); +#225502 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225503 = ORIENTED_EDGE('',*,*,#225504,.F.); +#225504 = EDGE_CURVE('',#225505,#225497,#225507,.T.); +#225505 = VERTEX_POINT('',#225506); +#225506 = CARTESIAN_POINT('',(144.225279,-76.647426,0.)); +#225507 = LINE('',#225508,#225509); +#225508 = CARTESIAN_POINT('',(144.225279,-76.647426,0.)); +#225509 = VECTOR('',#225510,1.); +#225510 = DIRECTION('',(0.,0.,-1.)); +#225511 = ORIENTED_EDGE('',*,*,#225512,.F.); +#225512 = EDGE_CURVE('',#225474,#225505,#225513,.T.); +#225513 = LINE('',#225514,#225515); +#225514 = CARTESIAN_POINT('',(144.202882,-76.701497,0.)); +#225515 = VECTOR('',#225516,1.); +#225516 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225517 = PLANE('',#225518); +#225518 = AXIS2_PLACEMENT_3D('',#225519,#225520,#225521); +#225519 = CARTESIAN_POINT('',(144.202882,-76.701497,0.)); +#225520 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#225521 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225522 = ADVANCED_FACE('',(#225523),#225548,.F.); +#225523 = FACE_BOUND('',#225524,.F.); +#225524 = EDGE_LOOP('',(#225525,#225526,#225534,#225542)); +#225525 = ORIENTED_EDGE('',*,*,#225504,.T.); +#225526 = ORIENTED_EDGE('',*,*,#225527,.T.); +#225527 = EDGE_CURVE('',#225497,#225528,#225530,.T.); +#225528 = VERTEX_POINT('',#225529); +#225529 = CARTESIAN_POINT('',(144.25,-76.618629,-3.5E-02)); +#225530 = LINE('',#225531,#225532); +#225531 = CARTESIAN_POINT('',(144.225279,-76.647426,-3.5E-02)); +#225532 = VECTOR('',#225533,1.); +#225533 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225534 = ORIENTED_EDGE('',*,*,#225535,.F.); +#225535 = EDGE_CURVE('',#225536,#225528,#225538,.T.); +#225536 = VERTEX_POINT('',#225537); +#225537 = CARTESIAN_POINT('',(144.25,-76.618629,0.)); +#225538 = LINE('',#225539,#225540); +#225539 = CARTESIAN_POINT('',(144.25,-76.618629,0.)); +#225540 = VECTOR('',#225541,1.); +#225541 = DIRECTION('',(0.,0.,-1.)); +#225542 = ORIENTED_EDGE('',*,*,#225543,.F.); +#225543 = EDGE_CURVE('',#225505,#225536,#225544,.T.); +#225544 = LINE('',#225545,#225546); +#225545 = CARTESIAN_POINT('',(144.225279,-76.647426,0.)); +#225546 = VECTOR('',#225547,1.); +#225547 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225548 = PLANE('',#225549); +#225549 = AXIS2_PLACEMENT_3D('',#225550,#225551,#225552); +#225550 = CARTESIAN_POINT('',(144.225279,-76.647426,0.)); +#225551 = DIRECTION('',(0.75876350894,-0.651366208442,0.)); +#225552 = DIRECTION('',(0.651366208442,0.75876350894,0.)); +#225553 = ADVANCED_FACE('',(#225554),#225579,.F.); +#225554 = FACE_BOUND('',#225555,.F.); +#225555 = EDGE_LOOP('',(#225556,#225557,#225565,#225573)); +#225556 = ORIENTED_EDGE('',*,*,#225535,.T.); +#225557 = ORIENTED_EDGE('',*,*,#225558,.T.); +#225558 = EDGE_CURVE('',#225528,#225559,#225561,.T.); +#225559 = VERTEX_POINT('',#225560); +#225560 = CARTESIAN_POINT('',(144.252882,-70.470736,-3.5E-02)); +#225561 = LINE('',#225562,#225563); +#225562 = CARTESIAN_POINT('',(144.25,-76.618629,-3.5E-02)); +#225563 = VECTOR('',#225564,1.); +#225564 = DIRECTION('',(4.687784389441E-04,0.999999890123,0.)); +#225565 = ORIENTED_EDGE('',*,*,#225566,.F.); +#225566 = EDGE_CURVE('',#225567,#225559,#225569,.T.); +#225567 = VERTEX_POINT('',#225568); +#225568 = CARTESIAN_POINT('',(144.252882,-70.470736,0.)); +#225569 = LINE('',#225570,#225571); +#225570 = CARTESIAN_POINT('',(144.252882,-70.470736,0.)); +#225571 = VECTOR('',#225572,1.); +#225572 = DIRECTION('',(0.,0.,-1.)); +#225573 = ORIENTED_EDGE('',*,*,#225574,.F.); +#225574 = EDGE_CURVE('',#225536,#225567,#225575,.T.); +#225575 = LINE('',#225576,#225577); +#225576 = CARTESIAN_POINT('',(144.25,-76.618629,0.)); +#225577 = VECTOR('',#225578,1.); +#225578 = DIRECTION('',(4.687784389441E-04,0.999999890123,0.)); +#225579 = PLANE('',#225580); +#225580 = AXIS2_PLACEMENT_3D('',#225581,#225582,#225583); +#225581 = CARTESIAN_POINT('',(144.25,-76.618629,0.)); +#225582 = DIRECTION('',(0.999999890123,-4.687784389441E-04,0.)); +#225583 = DIRECTION('',(4.687784389441E-04,0.999999890123,0.)); +#225584 = ADVANCED_FACE('',(#225585),#225610,.F.); +#225585 = FACE_BOUND('',#225586,.F.); +#225586 = EDGE_LOOP('',(#225587,#225588,#225596,#225604)); +#225587 = ORIENTED_EDGE('',*,*,#225566,.T.); +#225588 = ORIENTED_EDGE('',*,*,#225589,.T.); +#225589 = EDGE_CURVE('',#225559,#225590,#225592,.T.); +#225590 = VERTEX_POINT('',#225591); +#225591 = CARTESIAN_POINT('',(144.275279,-70.416665,-3.5E-02)); +#225592 = LINE('',#225593,#225594); +#225593 = CARTESIAN_POINT('',(144.252882,-70.470736,-3.5E-02)); +#225594 = VECTOR('',#225595,1.); +#225595 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225596 = ORIENTED_EDGE('',*,*,#225597,.F.); +#225597 = EDGE_CURVE('',#225598,#225590,#225600,.T.); +#225598 = VERTEX_POINT('',#225599); +#225599 = CARTESIAN_POINT('',(144.275279,-70.416665,0.)); +#225600 = LINE('',#225601,#225602); +#225601 = CARTESIAN_POINT('',(144.275279,-70.416665,0.)); +#225602 = VECTOR('',#225603,1.); +#225603 = DIRECTION('',(0.,0.,-1.)); +#225604 = ORIENTED_EDGE('',*,*,#225605,.F.); +#225605 = EDGE_CURVE('',#225567,#225598,#225606,.T.); +#225606 = LINE('',#225607,#225608); +#225607 = CARTESIAN_POINT('',(144.252882,-70.470736,0.)); +#225608 = VECTOR('',#225609,1.); +#225609 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225610 = PLANE('',#225611); +#225611 = AXIS2_PLACEMENT_3D('',#225612,#225613,#225614); +#225612 = CARTESIAN_POINT('',(144.252882,-70.470736,0.)); +#225613 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#225614 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#225615 = ADVANCED_FACE('',(#225616),#225641,.F.); +#225616 = FACE_BOUND('',#225617,.F.); +#225617 = EDGE_LOOP('',(#225618,#225619,#225627,#225635)); +#225618 = ORIENTED_EDGE('',*,*,#225597,.T.); +#225619 = ORIENTED_EDGE('',*,*,#225620,.T.); +#225620 = EDGE_CURVE('',#225590,#225621,#225623,.T.); +#225621 = VERTEX_POINT('',#225622); +#225622 = CARTESIAN_POINT('',(144.512317,-70.17555,-3.5E-02)); +#225623 = LINE('',#225624,#225625); +#225624 = CARTESIAN_POINT('',(144.275279,-70.416665,-3.5E-02)); +#225625 = VECTOR('',#225626,1.); +#225626 = DIRECTION('',(0.701052109593,0.713110047353,0.)); +#225627 = ORIENTED_EDGE('',*,*,#225628,.F.); +#225628 = EDGE_CURVE('',#225629,#225621,#225631,.T.); +#225629 = VERTEX_POINT('',#225630); +#225630 = CARTESIAN_POINT('',(144.512317,-70.17555,0.)); +#225631 = LINE('',#225632,#225633); +#225632 = CARTESIAN_POINT('',(144.512317,-70.17555,0.)); +#225633 = VECTOR('',#225634,1.); +#225634 = DIRECTION('',(0.,0.,-1.)); +#225635 = ORIENTED_EDGE('',*,*,#225636,.F.); +#225636 = EDGE_CURVE('',#225598,#225629,#225637,.T.); +#225637 = LINE('',#225638,#225639); +#225638 = CARTESIAN_POINT('',(144.275279,-70.416665,0.)); +#225639 = VECTOR('',#225640,1.); +#225640 = DIRECTION('',(0.701052109593,0.713110047353,0.)); +#225641 = PLANE('',#225642); +#225642 = AXIS2_PLACEMENT_3D('',#225643,#225644,#225645); +#225643 = CARTESIAN_POINT('',(144.275279,-70.416665,0.)); +#225644 = DIRECTION('',(0.713110047353,-0.701052109593,0.)); +#225645 = DIRECTION('',(0.701052109593,0.713110047353,0.)); +#225646 = ADVANCED_FACE('',(#225647),#225672,.F.); +#225647 = FACE_BOUND('',#225648,.F.); +#225648 = EDGE_LOOP('',(#225649,#225650,#225658,#225666)); +#225649 = ORIENTED_EDGE('',*,*,#225628,.T.); +#225650 = ORIENTED_EDGE('',*,*,#225651,.T.); +#225651 = EDGE_CURVE('',#225621,#225652,#225654,.T.); +#225652 = VERTEX_POINT('',#225653); +#225653 = CARTESIAN_POINT('',(144.502567,-70.139158,-3.5E-02)); +#225654 = LINE('',#225655,#225656); +#225655 = CARTESIAN_POINT('',(144.512317,-70.17555,-3.5E-02)); +#225656 = VECTOR('',#225657,1.); +#225657 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#225658 = ORIENTED_EDGE('',*,*,#225659,.F.); +#225659 = EDGE_CURVE('',#225660,#225652,#225662,.T.); +#225660 = VERTEX_POINT('',#225661); +#225661 = CARTESIAN_POINT('',(144.502567,-70.139158,0.)); +#225662 = LINE('',#225663,#225664); +#225663 = CARTESIAN_POINT('',(144.502567,-70.139158,0.)); +#225664 = VECTOR('',#225665,1.); +#225665 = DIRECTION('',(0.,0.,-1.)); +#225666 = ORIENTED_EDGE('',*,*,#225667,.F.); +#225667 = EDGE_CURVE('',#225629,#225660,#225668,.T.); +#225668 = LINE('',#225669,#225670); +#225669 = CARTESIAN_POINT('',(144.512317,-70.17555,0.)); +#225670 = VECTOR('',#225671,1.); +#225671 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#225672 = PLANE('',#225673); +#225673 = AXIS2_PLACEMENT_3D('',#225674,#225675,#225676); +#225674 = CARTESIAN_POINT('',(144.512317,-70.17555,0.)); +#225675 = DIRECTION('',(0.965933835092,0.258789153994,0.)); +#225676 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#225677 = ADVANCED_FACE('',(#225678),#225705,.T.); +#225678 = FACE_BOUND('',#225679,.F.); +#225679 = EDGE_LOOP('',(#225680,#225681,#225690,#225698)); +#225680 = ORIENTED_EDGE('',*,*,#225659,.T.); +#225681 = ORIENTED_EDGE('',*,*,#225682,.T.); +#225682 = EDGE_CURVE('',#225652,#225683,#225685,.T.); +#225683 = VERTEX_POINT('',#225684); +#225684 = CARTESIAN_POINT('',(144.760842,-70.397433,-3.5E-02)); +#225685 = CIRCLE('',#225686,0.300000634557); +#225686 = AXIS2_PLACEMENT_3D('',#225687,#225688,#225689); +#225687 = CARTESIAN_POINT('',(144.80000095409,-70.0999990459,-3.5E-02)); +#225688 = DIRECTION('',(0.,0.,-1.)); +#225689 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#225690 = ORIENTED_EDGE('',*,*,#225691,.F.); +#225691 = EDGE_CURVE('',#225692,#225683,#225694,.T.); +#225692 = VERTEX_POINT('',#225693); +#225693 = CARTESIAN_POINT('',(144.760842,-70.397433,0.)); +#225694 = LINE('',#225695,#225696); +#225695 = CARTESIAN_POINT('',(144.760842,-70.397433,0.)); +#225696 = VECTOR('',#225697,1.); +#225697 = DIRECTION('',(0.,0.,-1.)); +#225698 = ORIENTED_EDGE('',*,*,#225699,.F.); +#225699 = EDGE_CURVE('',#225660,#225692,#225700,.T.); +#225700 = CIRCLE('',#225701,0.300000634557); +#225701 = AXIS2_PLACEMENT_3D('',#225702,#225703,#225704); +#225702 = CARTESIAN_POINT('',(144.80000095409,-70.0999990459,0.)); +#225703 = DIRECTION('',(0.,0.,-1.)); +#225704 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#225705 = CYLINDRICAL_SURFACE('',#225706,0.300000634557); +#225706 = AXIS2_PLACEMENT_3D('',#225707,#225708,#225709); +#225707 = CARTESIAN_POINT('',(144.80000095409,-70.0999990459,0.)); +#225708 = DIRECTION('',(-0.,-0.,1.)); +#225709 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#225710 = ADVANCED_FACE('',(#225711),#225727,.F.); +#225711 = FACE_BOUND('',#225712,.F.); +#225712 = EDGE_LOOP('',(#225713,#225714,#225720,#225721)); +#225713 = ORIENTED_EDGE('',*,*,#225691,.T.); +#225714 = ORIENTED_EDGE('',*,*,#225715,.T.); +#225715 = EDGE_CURVE('',#225683,#224185,#225716,.T.); +#225716 = LINE('',#225717,#225718); +#225717 = CARTESIAN_POINT('',(144.760842,-70.397433,-3.5E-02)); +#225718 = VECTOR('',#225719,1.); +#225719 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#225720 = ORIENTED_EDGE('',*,*,#224182,.F.); +#225721 = ORIENTED_EDGE('',*,*,#225722,.F.); +#225722 = EDGE_CURVE('',#225692,#224183,#225723,.T.); +#225723 = LINE('',#225724,#225725); +#225724 = CARTESIAN_POINT('',(144.760842,-70.397433,0.)); +#225725 = VECTOR('',#225726,1.); +#225726 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#225727 = PLANE('',#225728); +#225728 = AXIS2_PLACEMENT_3D('',#225729,#225730,#225731); +#225729 = CARTESIAN_POINT('',(144.760842,-70.397433,0.)); +#225730 = DIRECTION('',(0.25880728333,0.96592897777,0.)); +#225731 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#225732 = ADVANCED_FACE('',(#225733),#225760,.F.); +#225733 = FACE_BOUND('',#225734,.F.); +#225734 = EDGE_LOOP('',(#225735,#225745,#225752,#225753)); +#225735 = ORIENTED_EDGE('',*,*,#225736,.T.); +#225736 = EDGE_CURVE('',#225737,#225739,#225741,.T.); +#225737 = VERTEX_POINT('',#225738); +#225738 = CARTESIAN_POINT('',(140.537255,-89.7,0.)); +#225739 = VERTEX_POINT('',#225740); +#225740 = CARTESIAN_POINT('',(140.537255,-89.7,-3.5E-02)); +#225741 = LINE('',#225742,#225743); +#225742 = CARTESIAN_POINT('',(140.537255,-89.7,0.)); +#225743 = VECTOR('',#225744,1.); +#225744 = DIRECTION('',(0.,0.,-1.)); +#225745 = ORIENTED_EDGE('',*,*,#225746,.T.); +#225746 = EDGE_CURVE('',#225739,#225739,#225747,.T.); +#225747 = CIRCLE('',#225748,0.137255); +#225748 = AXIS2_PLACEMENT_3D('',#225749,#225750,#225751); +#225749 = CARTESIAN_POINT('',(140.4,-89.7,-3.5E-02)); +#225750 = DIRECTION('',(0.,0.,1.)); +#225751 = DIRECTION('',(1.,0.,-0.)); +#225752 = ORIENTED_EDGE('',*,*,#225736,.F.); +#225753 = ORIENTED_EDGE('',*,*,#225754,.F.); +#225754 = EDGE_CURVE('',#225737,#225737,#225755,.T.); +#225755 = CIRCLE('',#225756,0.137255); +#225756 = AXIS2_PLACEMENT_3D('',#225757,#225758,#225759); +#225757 = CARTESIAN_POINT('',(140.4,-89.7,0.)); +#225758 = DIRECTION('',(0.,0.,1.)); +#225759 = DIRECTION('',(1.,0.,-0.)); +#225760 = CYLINDRICAL_SURFACE('',#225761,0.137255); +#225761 = AXIS2_PLACEMENT_3D('',#225762,#225763,#225764); +#225762 = CARTESIAN_POINT('',(140.4,-89.7,0.)); +#225763 = DIRECTION('',(0.,0.,1.)); +#225764 = DIRECTION('',(1.,0.,-0.)); +#225765 = ADVANCED_FACE('',(#225766),#225793,.F.); +#225766 = FACE_BOUND('',#225767,.F.); +#225767 = EDGE_LOOP('',(#225768,#225778,#225785,#225786)); +#225768 = ORIENTED_EDGE('',*,*,#225769,.T.); +#225769 = EDGE_CURVE('',#225770,#225772,#225774,.T.); +#225770 = VERTEX_POINT('',#225771); +#225771 = CARTESIAN_POINT('',(144.937255,-70.1,0.)); +#225772 = VERTEX_POINT('',#225773); +#225773 = CARTESIAN_POINT('',(144.937255,-70.1,-3.5E-02)); +#225774 = LINE('',#225775,#225776); +#225775 = CARTESIAN_POINT('',(144.937255,-70.1,0.)); +#225776 = VECTOR('',#225777,1.); +#225777 = DIRECTION('',(0.,0.,-1.)); +#225778 = ORIENTED_EDGE('',*,*,#225779,.T.); +#225779 = EDGE_CURVE('',#225772,#225772,#225780,.T.); +#225780 = CIRCLE('',#225781,0.137255); +#225781 = AXIS2_PLACEMENT_3D('',#225782,#225783,#225784); +#225782 = CARTESIAN_POINT('',(144.8,-70.1,-3.5E-02)); +#225783 = DIRECTION('',(0.,0.,1.)); +#225784 = DIRECTION('',(1.,0.,-0.)); +#225785 = ORIENTED_EDGE('',*,*,#225769,.F.); +#225786 = ORIENTED_EDGE('',*,*,#225787,.F.); +#225787 = EDGE_CURVE('',#225770,#225770,#225788,.T.); +#225788 = CIRCLE('',#225789,0.137255); +#225789 = AXIS2_PLACEMENT_3D('',#225790,#225791,#225792); +#225790 = CARTESIAN_POINT('',(144.8,-70.1,0.)); +#225791 = DIRECTION('',(0.,0.,1.)); +#225792 = DIRECTION('',(1.,0.,-0.)); +#225793 = CYLINDRICAL_SURFACE('',#225794,0.137255); +#225794 = AXIS2_PLACEMENT_3D('',#225795,#225796,#225797); +#225795 = CARTESIAN_POINT('',(144.8,-70.1,0.)); +#225796 = DIRECTION('',(0.,0.,1.)); +#225797 = DIRECTION('',(1.,0.,-0.)); +#225798 = ADVANCED_FACE('',(#225799,#225851,#225854),#225857,.F.); +#225799 = FACE_BOUND('',#225800,.F.); +#225800 = EDGE_LOOP('',(#225801,#225802,#225803,#225804,#225805,#225806, + #225807,#225808,#225809,#225810,#225811,#225812,#225813,#225814, + #225815,#225816,#225817,#225818,#225819,#225820,#225821,#225822, + #225823,#225824,#225825,#225826,#225827,#225828,#225829,#225830, + #225831,#225832,#225833,#225834,#225835,#225836,#225837,#225838, + #225839,#225840,#225841,#225842,#225843,#225844,#225845,#225846, + #225847,#225848,#225849,#225850)); +#225801 = ORIENTED_EDGE('',*,*,#224208,.T.); +#225802 = ORIENTED_EDGE('',*,*,#224239,.T.); +#225803 = ORIENTED_EDGE('',*,*,#224270,.T.); +#225804 = ORIENTED_EDGE('',*,*,#224301,.T.); +#225805 = ORIENTED_EDGE('',*,*,#224332,.T.); +#225806 = ORIENTED_EDGE('',*,*,#224363,.T.); +#225807 = ORIENTED_EDGE('',*,*,#224394,.T.); +#225808 = ORIENTED_EDGE('',*,*,#224425,.T.); +#225809 = ORIENTED_EDGE('',*,*,#224456,.T.); +#225810 = ORIENTED_EDGE('',*,*,#224487,.T.); +#225811 = ORIENTED_EDGE('',*,*,#224518,.T.); +#225812 = ORIENTED_EDGE('',*,*,#224549,.T.); +#225813 = ORIENTED_EDGE('',*,*,#224580,.T.); +#225814 = ORIENTED_EDGE('',*,*,#224611,.T.); +#225815 = ORIENTED_EDGE('',*,*,#224642,.T.); +#225816 = ORIENTED_EDGE('',*,*,#224673,.T.); +#225817 = ORIENTED_EDGE('',*,*,#224704,.T.); +#225818 = ORIENTED_EDGE('',*,*,#224735,.T.); +#225819 = ORIENTED_EDGE('',*,*,#224766,.T.); +#225820 = ORIENTED_EDGE('',*,*,#224797,.T.); +#225821 = ORIENTED_EDGE('',*,*,#224828,.T.); +#225822 = ORIENTED_EDGE('',*,*,#224859,.T.); +#225823 = ORIENTED_EDGE('',*,*,#224890,.T.); +#225824 = ORIENTED_EDGE('',*,*,#224922,.T.); +#225825 = ORIENTED_EDGE('',*,*,#224954,.T.); +#225826 = ORIENTED_EDGE('',*,*,#224985,.T.); +#225827 = ORIENTED_EDGE('',*,*,#225016,.T.); +#225828 = ORIENTED_EDGE('',*,*,#225047,.T.); +#225829 = ORIENTED_EDGE('',*,*,#225078,.T.); +#225830 = ORIENTED_EDGE('',*,*,#225109,.T.); +#225831 = ORIENTED_EDGE('',*,*,#225140,.T.); +#225832 = ORIENTED_EDGE('',*,*,#225171,.T.); +#225833 = ORIENTED_EDGE('',*,*,#225202,.T.); +#225834 = ORIENTED_EDGE('',*,*,#225233,.T.); +#225835 = ORIENTED_EDGE('',*,*,#225264,.T.); +#225836 = ORIENTED_EDGE('',*,*,#225295,.T.); +#225837 = ORIENTED_EDGE('',*,*,#225326,.T.); +#225838 = ORIENTED_EDGE('',*,*,#225357,.T.); +#225839 = ORIENTED_EDGE('',*,*,#225388,.T.); +#225840 = ORIENTED_EDGE('',*,*,#225419,.T.); +#225841 = ORIENTED_EDGE('',*,*,#225450,.T.); +#225842 = ORIENTED_EDGE('',*,*,#225481,.T.); +#225843 = ORIENTED_EDGE('',*,*,#225512,.T.); +#225844 = ORIENTED_EDGE('',*,*,#225543,.T.); +#225845 = ORIENTED_EDGE('',*,*,#225574,.T.); +#225846 = ORIENTED_EDGE('',*,*,#225605,.T.); +#225847 = ORIENTED_EDGE('',*,*,#225636,.T.); +#225848 = ORIENTED_EDGE('',*,*,#225667,.T.); +#225849 = ORIENTED_EDGE('',*,*,#225699,.T.); +#225850 = ORIENTED_EDGE('',*,*,#225722,.T.); +#225851 = FACE_BOUND('',#225852,.F.); +#225852 = EDGE_LOOP('',(#225853)); +#225853 = ORIENTED_EDGE('',*,*,#225754,.T.); +#225854 = FACE_BOUND('',#225855,.F.); +#225855 = EDGE_LOOP('',(#225856)); +#225856 = ORIENTED_EDGE('',*,*,#225787,.T.); +#225857 = PLANE('',#225858); +#225858 = AXIS2_PLACEMENT_3D('',#225859,#225860,#225861); +#225859 = CARTESIAN_POINT('',(0.,0.,0.)); +#225860 = DIRECTION('',(-0.,-0.,-1.)); +#225861 = DIRECTION('',(-1.,0.,0.)); +#225862 = ADVANCED_FACE('',(#225863,#225915,#225918),#225921,.T.); +#225863 = FACE_BOUND('',#225864,.T.); +#225864 = EDGE_LOOP('',(#225865,#225866,#225867,#225868,#225869,#225870, + #225871,#225872,#225873,#225874,#225875,#225876,#225877,#225878, + #225879,#225880,#225881,#225882,#225883,#225884,#225885,#225886, + #225887,#225888,#225889,#225890,#225891,#225892,#225893,#225894, + #225895,#225896,#225897,#225898,#225899,#225900,#225901,#225902, + #225903,#225904,#225905,#225906,#225907,#225908,#225909,#225910, + #225911,#225912,#225913,#225914)); +#225865 = ORIENTED_EDGE('',*,*,#224192,.T.); +#225866 = ORIENTED_EDGE('',*,*,#224223,.T.); +#225867 = ORIENTED_EDGE('',*,*,#224254,.T.); +#225868 = ORIENTED_EDGE('',*,*,#224285,.T.); +#225869 = ORIENTED_EDGE('',*,*,#224316,.T.); +#225870 = ORIENTED_EDGE('',*,*,#224347,.T.); +#225871 = ORIENTED_EDGE('',*,*,#224378,.T.); +#225872 = ORIENTED_EDGE('',*,*,#224409,.T.); +#225873 = ORIENTED_EDGE('',*,*,#224440,.T.); +#225874 = ORIENTED_EDGE('',*,*,#224471,.T.); +#225875 = ORIENTED_EDGE('',*,*,#224502,.T.); +#225876 = ORIENTED_EDGE('',*,*,#224533,.T.); +#225877 = ORIENTED_EDGE('',*,*,#224564,.T.); +#225878 = ORIENTED_EDGE('',*,*,#224595,.T.); +#225879 = ORIENTED_EDGE('',*,*,#224626,.T.); +#225880 = ORIENTED_EDGE('',*,*,#224657,.T.); +#225881 = ORIENTED_EDGE('',*,*,#224688,.T.); +#225882 = ORIENTED_EDGE('',*,*,#224719,.T.); +#225883 = ORIENTED_EDGE('',*,*,#224750,.T.); +#225884 = ORIENTED_EDGE('',*,*,#224781,.T.); +#225885 = ORIENTED_EDGE('',*,*,#224812,.T.); +#225886 = ORIENTED_EDGE('',*,*,#224843,.T.); +#225887 = ORIENTED_EDGE('',*,*,#224874,.T.); +#225888 = ORIENTED_EDGE('',*,*,#224905,.T.); +#225889 = ORIENTED_EDGE('',*,*,#224938,.T.); +#225890 = ORIENTED_EDGE('',*,*,#224969,.T.); +#225891 = ORIENTED_EDGE('',*,*,#225000,.T.); +#225892 = ORIENTED_EDGE('',*,*,#225031,.T.); +#225893 = ORIENTED_EDGE('',*,*,#225062,.T.); +#225894 = ORIENTED_EDGE('',*,*,#225093,.T.); +#225895 = ORIENTED_EDGE('',*,*,#225124,.T.); +#225896 = ORIENTED_EDGE('',*,*,#225155,.T.); +#225897 = ORIENTED_EDGE('',*,*,#225186,.T.); +#225898 = ORIENTED_EDGE('',*,*,#225217,.T.); +#225899 = ORIENTED_EDGE('',*,*,#225248,.T.); +#225900 = ORIENTED_EDGE('',*,*,#225279,.T.); +#225901 = ORIENTED_EDGE('',*,*,#225310,.T.); +#225902 = ORIENTED_EDGE('',*,*,#225341,.T.); +#225903 = ORIENTED_EDGE('',*,*,#225372,.T.); +#225904 = ORIENTED_EDGE('',*,*,#225403,.T.); +#225905 = ORIENTED_EDGE('',*,*,#225434,.T.); +#225906 = ORIENTED_EDGE('',*,*,#225465,.T.); +#225907 = ORIENTED_EDGE('',*,*,#225496,.T.); +#225908 = ORIENTED_EDGE('',*,*,#225527,.T.); +#225909 = ORIENTED_EDGE('',*,*,#225558,.T.); +#225910 = ORIENTED_EDGE('',*,*,#225589,.T.); +#225911 = ORIENTED_EDGE('',*,*,#225620,.T.); +#225912 = ORIENTED_EDGE('',*,*,#225651,.T.); +#225913 = ORIENTED_EDGE('',*,*,#225682,.T.); +#225914 = ORIENTED_EDGE('',*,*,#225715,.T.); +#225915 = FACE_BOUND('',#225916,.T.); +#225916 = EDGE_LOOP('',(#225917)); +#225917 = ORIENTED_EDGE('',*,*,#225746,.T.); +#225918 = FACE_BOUND('',#225919,.T.); +#225919 = EDGE_LOOP('',(#225920)); +#225920 = ORIENTED_EDGE('',*,*,#225779,.T.); +#225921 = PLANE('',#225922); +#225922 = AXIS2_PLACEMENT_3D('',#225923,#225924,#225925); +#225923 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#225924 = DIRECTION('',(-0.,-0.,-1.)); +#225925 = DIRECTION('',(-1.,0.,0.)); +#225926 = MANIFOLD_SOLID_BREP('',#225927); +#225927 = CLOSED_SHELL('',(#225928,#225968,#225999,#226030,#226061, + #226092,#226123,#226154,#226187,#226218,#226249,#226280,#226311, + #226342,#226373,#226404,#226437,#226468,#226499,#226530,#226561, + #226592,#226623,#226654,#226685,#226716,#226747,#226778,#226809, + #226840,#226873,#226904,#226935,#226966,#226997,#227028,#227059, + #227090,#227121,#227152,#227183,#227214,#227245,#227276,#227307, + #227338,#227369,#227402,#227433,#227464,#227495,#227526,#227557, + #227588,#227619,#227650,#227681,#227712,#227743,#227774,#227805, + #227836,#227869,#227891,#227924,#227998)); +#225928 = ADVANCED_FACE('',(#225929),#225963,.T.); +#225929 = FACE_BOUND('',#225930,.T.); +#225930 = EDGE_LOOP('',(#225931,#225941,#225949,#225957)); +#225931 = ORIENTED_EDGE('',*,*,#225932,.T.); +#225932 = EDGE_CURVE('',#225933,#225935,#225937,.T.); +#225933 = VERTEX_POINT('',#225934); +#225934 = CARTESIAN_POINT('',(147.6,-86.78113,1.51)); +#225935 = VERTEX_POINT('',#225936); +#225936 = CARTESIAN_POINT('',(147.6,-86.78113,1.545)); +#225937 = LINE('',#225938,#225939); +#225938 = CARTESIAN_POINT('',(147.6,-86.78113,1.51)); +#225939 = VECTOR('',#225940,1.); +#225940 = DIRECTION('',(0.,0.,1.)); +#225941 = ORIENTED_EDGE('',*,*,#225942,.T.); +#225942 = EDGE_CURVE('',#225935,#225943,#225945,.T.); +#225943 = VERTEX_POINT('',#225944); +#225944 = CARTESIAN_POINT('',(147.6,-87.758578,1.545)); +#225945 = LINE('',#225946,#225947); +#225946 = CARTESIAN_POINT('',(147.6,-86.78113,1.545)); +#225947 = VECTOR('',#225948,1.); +#225948 = DIRECTION('',(0.,-1.,0.)); +#225949 = ORIENTED_EDGE('',*,*,#225950,.F.); +#225950 = EDGE_CURVE('',#225951,#225943,#225953,.T.); +#225951 = VERTEX_POINT('',#225952); +#225952 = CARTESIAN_POINT('',(147.6,-87.758578,1.51)); +#225953 = LINE('',#225954,#225955); +#225954 = CARTESIAN_POINT('',(147.6,-87.758578,1.51)); +#225955 = VECTOR('',#225956,1.); +#225956 = DIRECTION('',(0.,0.,1.)); +#225957 = ORIENTED_EDGE('',*,*,#225958,.F.); +#225958 = EDGE_CURVE('',#225933,#225951,#225959,.T.); +#225959 = LINE('',#225960,#225961); +#225960 = CARTESIAN_POINT('',(147.6,-86.78113,1.51)); +#225961 = VECTOR('',#225962,1.); +#225962 = DIRECTION('',(0.,-1.,0.)); +#225963 = PLANE('',#225964); +#225964 = AXIS2_PLACEMENT_3D('',#225965,#225966,#225967); +#225965 = CARTESIAN_POINT('',(147.6,-86.78113,1.51)); +#225966 = DIRECTION('',(1.,0.,-0.)); +#225967 = DIRECTION('',(0.,-1.,0.)); +#225968 = ADVANCED_FACE('',(#225969),#225994,.T.); +#225969 = FACE_BOUND('',#225970,.T.); +#225970 = EDGE_LOOP('',(#225971,#225972,#225980,#225988)); +#225971 = ORIENTED_EDGE('',*,*,#225950,.T.); +#225972 = ORIENTED_EDGE('',*,*,#225973,.T.); +#225973 = EDGE_CURVE('',#225943,#225974,#225976,.T.); +#225974 = VERTEX_POINT('',#225975); +#225975 = CARTESIAN_POINT('',(149.183147,-89.344443,1.545)); +#225976 = LINE('',#225977,#225978); +#225977 = CARTESIAN_POINT('',(147.6,-87.758578,1.545)); +#225978 = VECTOR('',#225979,1.); +#225979 = DIRECTION('',(0.706500049587,-0.707712992627,0.)); +#225980 = ORIENTED_EDGE('',*,*,#225981,.F.); +#225981 = EDGE_CURVE('',#225982,#225974,#225984,.T.); +#225982 = VERTEX_POINT('',#225983); +#225983 = CARTESIAN_POINT('',(149.183147,-89.344443,1.51)); +#225984 = LINE('',#225985,#225986); +#225985 = CARTESIAN_POINT('',(149.183147,-89.344443,1.51)); +#225986 = VECTOR('',#225987,1.); +#225987 = DIRECTION('',(0.,0.,1.)); +#225988 = ORIENTED_EDGE('',*,*,#225989,.F.); +#225989 = EDGE_CURVE('',#225951,#225982,#225990,.T.); +#225990 = LINE('',#225991,#225992); +#225991 = CARTESIAN_POINT('',(147.6,-87.758578,1.51)); +#225992 = VECTOR('',#225993,1.); +#225993 = DIRECTION('',(0.706500049587,-0.707712992627,0.)); +#225994 = PLANE('',#225995); +#225995 = AXIS2_PLACEMENT_3D('',#225996,#225997,#225998); +#225996 = CARTESIAN_POINT('',(147.6,-87.758578,1.51)); +#225997 = DIRECTION('',(0.707712992627,0.706500049587,-0.)); +#225998 = DIRECTION('',(0.706500049587,-0.707712992627,0.)); +#225999 = ADVANCED_FACE('',(#226000),#226025,.T.); +#226000 = FACE_BOUND('',#226001,.T.); +#226001 = EDGE_LOOP('',(#226002,#226003,#226011,#226019)); +#226002 = ORIENTED_EDGE('',*,*,#225981,.T.); +#226003 = ORIENTED_EDGE('',*,*,#226004,.T.); +#226004 = EDGE_CURVE('',#225974,#226005,#226007,.T.); +#226005 = VERTEX_POINT('',#226006); +#226006 = CARTESIAN_POINT('',(149.198079,-89.380491,1.545)); +#226007 = LINE('',#226008,#226009); +#226008 = CARTESIAN_POINT('',(149.183147,-89.344443,1.545)); +#226009 = VECTOR('',#226010,1.); +#226010 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226011 = ORIENTED_EDGE('',*,*,#226012,.F.); +#226012 = EDGE_CURVE('',#226013,#226005,#226015,.T.); +#226013 = VERTEX_POINT('',#226014); +#226014 = CARTESIAN_POINT('',(149.198079,-89.380491,1.51)); +#226015 = LINE('',#226016,#226017); +#226016 = CARTESIAN_POINT('',(149.198079,-89.380491,1.51)); +#226017 = VECTOR('',#226018,1.); +#226018 = DIRECTION('',(0.,0.,1.)); +#226019 = ORIENTED_EDGE('',*,*,#226020,.F.); +#226020 = EDGE_CURVE('',#225982,#226013,#226021,.T.); +#226021 = LINE('',#226022,#226023); +#226022 = CARTESIAN_POINT('',(149.183147,-89.344443,1.51)); +#226023 = VECTOR('',#226024,1.); +#226024 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226025 = PLANE('',#226026); +#226026 = AXIS2_PLACEMENT_3D('',#226027,#226028,#226029); +#226027 = CARTESIAN_POINT('',(149.183147,-89.344443,1.51)); +#226028 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#226029 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226030 = ADVANCED_FACE('',(#226031),#226056,.T.); +#226031 = FACE_BOUND('',#226032,.T.); +#226032 = EDGE_LOOP('',(#226033,#226034,#226042,#226050)); +#226033 = ORIENTED_EDGE('',*,*,#226012,.T.); +#226034 = ORIENTED_EDGE('',*,*,#226035,.T.); +#226035 = EDGE_CURVE('',#226005,#226036,#226038,.T.); +#226036 = VERTEX_POINT('',#226037); +#226037 = CARTESIAN_POINT('',(149.2,-91.058578,1.545)); +#226038 = LINE('',#226039,#226040); +#226039 = CARTESIAN_POINT('',(149.198079,-89.380491,1.545)); +#226040 = VECTOR('',#226041,1.); +#226041 = DIRECTION('',(1.144755153505E-03,-0.999999344768,0.)); +#226042 = ORIENTED_EDGE('',*,*,#226043,.F.); +#226043 = EDGE_CURVE('',#226044,#226036,#226046,.T.); +#226044 = VERTEX_POINT('',#226045); +#226045 = CARTESIAN_POINT('',(149.2,-91.058578,1.51)); +#226046 = LINE('',#226047,#226048); +#226047 = CARTESIAN_POINT('',(149.2,-91.058578,1.51)); +#226048 = VECTOR('',#226049,1.); +#226049 = DIRECTION('',(0.,0.,1.)); +#226050 = ORIENTED_EDGE('',*,*,#226051,.F.); +#226051 = EDGE_CURVE('',#226013,#226044,#226052,.T.); +#226052 = LINE('',#226053,#226054); +#226053 = CARTESIAN_POINT('',(149.198079,-89.380491,1.51)); +#226054 = VECTOR('',#226055,1.); +#226055 = DIRECTION('',(1.144755153505E-03,-0.999999344768,0.)); +#226056 = PLANE('',#226057); +#226057 = AXIS2_PLACEMENT_3D('',#226058,#226059,#226060); +#226058 = CARTESIAN_POINT('',(149.198079,-89.380491,1.51)); +#226059 = DIRECTION('',(0.999999344768,1.144755153505E-03,-0.)); +#226060 = DIRECTION('',(1.144755153505E-03,-0.999999344768,0.)); +#226061 = ADVANCED_FACE('',(#226062),#226087,.T.); +#226062 = FACE_BOUND('',#226063,.T.); +#226063 = EDGE_LOOP('',(#226064,#226065,#226073,#226081)); +#226064 = ORIENTED_EDGE('',*,*,#226043,.T.); +#226065 = ORIENTED_EDGE('',*,*,#226066,.T.); +#226066 = EDGE_CURVE('',#226036,#226067,#226069,.T.); +#226067 = VERTEX_POINT('',#226068); +#226068 = CARTESIAN_POINT('',(151.083147,-92.944443,1.545)); +#226069 = LINE('',#226070,#226071); +#226070 = CARTESIAN_POINT('',(149.2,-91.058578,1.545)); +#226071 = VECTOR('',#226072,1.); +#226072 = DIRECTION('',(0.706596671715,-0.707616522929,0.)); +#226073 = ORIENTED_EDGE('',*,*,#226074,.F.); +#226074 = EDGE_CURVE('',#226075,#226067,#226077,.T.); +#226075 = VERTEX_POINT('',#226076); +#226076 = CARTESIAN_POINT('',(151.083147,-92.944443,1.51)); +#226077 = LINE('',#226078,#226079); +#226078 = CARTESIAN_POINT('',(151.083147,-92.944443,1.51)); +#226079 = VECTOR('',#226080,1.); +#226080 = DIRECTION('',(0.,0.,1.)); +#226081 = ORIENTED_EDGE('',*,*,#226082,.F.); +#226082 = EDGE_CURVE('',#226044,#226075,#226083,.T.); +#226083 = LINE('',#226084,#226085); +#226084 = CARTESIAN_POINT('',(149.2,-91.058578,1.51)); +#226085 = VECTOR('',#226086,1.); +#226086 = DIRECTION('',(0.706596671715,-0.707616522929,0.)); +#226087 = PLANE('',#226088); +#226088 = AXIS2_PLACEMENT_3D('',#226089,#226090,#226091); +#226089 = CARTESIAN_POINT('',(149.2,-91.058578,1.51)); +#226090 = DIRECTION('',(0.707616522929,0.706596671715,-0.)); +#226091 = DIRECTION('',(0.706596671715,-0.707616522929,0.)); +#226092 = ADVANCED_FACE('',(#226093),#226118,.T.); +#226093 = FACE_BOUND('',#226094,.T.); +#226094 = EDGE_LOOP('',(#226095,#226096,#226104,#226112)); +#226095 = ORIENTED_EDGE('',*,*,#226074,.T.); +#226096 = ORIENTED_EDGE('',*,*,#226097,.T.); +#226097 = EDGE_CURVE('',#226067,#226098,#226100,.T.); +#226098 = VERTEX_POINT('',#226099); +#226099 = CARTESIAN_POINT('',(151.098079,-92.980491,1.545)); +#226100 = LINE('',#226101,#226102); +#226101 = CARTESIAN_POINT('',(151.083147,-92.944443,1.545)); +#226102 = VECTOR('',#226103,1.); +#226103 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226104 = ORIENTED_EDGE('',*,*,#226105,.F.); +#226105 = EDGE_CURVE('',#226106,#226098,#226108,.T.); +#226106 = VERTEX_POINT('',#226107); +#226107 = CARTESIAN_POINT('',(151.098079,-92.980491,1.51)); +#226108 = LINE('',#226109,#226110); +#226109 = CARTESIAN_POINT('',(151.098079,-92.980491,1.51)); +#226110 = VECTOR('',#226111,1.); +#226111 = DIRECTION('',(0.,0.,1.)); +#226112 = ORIENTED_EDGE('',*,*,#226113,.F.); +#226113 = EDGE_CURVE('',#226075,#226106,#226114,.T.); +#226114 = LINE('',#226115,#226116); +#226115 = CARTESIAN_POINT('',(151.083147,-92.944443,1.51)); +#226116 = VECTOR('',#226117,1.); +#226117 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226118 = PLANE('',#226119); +#226119 = AXIS2_PLACEMENT_3D('',#226120,#226121,#226122); +#226120 = CARTESIAN_POINT('',(151.083147,-92.944443,1.51)); +#226121 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#226122 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226123 = ADVANCED_FACE('',(#226124),#226149,.T.); +#226124 = FACE_BOUND('',#226125,.T.); +#226125 = EDGE_LOOP('',(#226126,#226127,#226135,#226143)); +#226126 = ORIENTED_EDGE('',*,*,#226105,.T.); +#226127 = ORIENTED_EDGE('',*,*,#226128,.T.); +#226128 = EDGE_CURVE('',#226098,#226129,#226131,.T.); +#226129 = VERTEX_POINT('',#226130); +#226130 = CARTESIAN_POINT('',(151.098079,-98.919509,1.545)); +#226131 = LINE('',#226132,#226133); +#226132 = CARTESIAN_POINT('',(151.098079,-92.980491,1.545)); +#226133 = VECTOR('',#226134,1.); +#226134 = DIRECTION('',(0.,-1.,0.)); +#226135 = ORIENTED_EDGE('',*,*,#226136,.F.); +#226136 = EDGE_CURVE('',#226137,#226129,#226139,.T.); +#226137 = VERTEX_POINT('',#226138); +#226138 = CARTESIAN_POINT('',(151.098079,-98.919509,1.51)); +#226139 = LINE('',#226140,#226141); +#226140 = CARTESIAN_POINT('',(151.098079,-98.919509,1.51)); +#226141 = VECTOR('',#226142,1.); +#226142 = DIRECTION('',(0.,0.,1.)); +#226143 = ORIENTED_EDGE('',*,*,#226144,.F.); +#226144 = EDGE_CURVE('',#226106,#226137,#226145,.T.); +#226145 = LINE('',#226146,#226147); +#226146 = CARTESIAN_POINT('',(151.098079,-92.980491,1.51)); +#226147 = VECTOR('',#226148,1.); +#226148 = DIRECTION('',(0.,-1.,0.)); +#226149 = PLANE('',#226150); +#226150 = AXIS2_PLACEMENT_3D('',#226151,#226152,#226153); +#226151 = CARTESIAN_POINT('',(151.098079,-92.980491,1.51)); +#226152 = DIRECTION('',(1.,0.,-0.)); +#226153 = DIRECTION('',(0.,-1.,0.)); +#226154 = ADVANCED_FACE('',(#226155),#226182,.T.); +#226155 = FACE_BOUND('',#226156,.T.); +#226156 = EDGE_LOOP('',(#226157,#226158,#226167,#226175)); +#226157 = ORIENTED_EDGE('',*,*,#226136,.T.); +#226158 = ORIENTED_EDGE('',*,*,#226159,.T.); +#226159 = EDGE_CURVE('',#226129,#226160,#226162,.T.); +#226160 = VERTEX_POINT('',#226161); +#226161 = CARTESIAN_POINT('',(151.019509,-98.998079,1.545)); +#226162 = CIRCLE('',#226163,0.100002891901); +#226163 = AXIS2_PLACEMENT_3D('',#226164,#226165,#226166); +#226164 = CARTESIAN_POINT('',(150.99999792896,-98.89999792896,1.545)); +#226165 = DIRECTION('',(0.,0.,-1.)); +#226166 = DIRECTION('',(0.980782347106,-0.195105068117,0.)); +#226167 = ORIENTED_EDGE('',*,*,#226168,.F.); +#226168 = EDGE_CURVE('',#226169,#226160,#226171,.T.); +#226169 = VERTEX_POINT('',#226170); +#226170 = CARTESIAN_POINT('',(151.019509,-98.998079,1.51)); +#226171 = LINE('',#226172,#226173); +#226172 = CARTESIAN_POINT('',(151.019509,-98.998079,1.51)); +#226173 = VECTOR('',#226174,1.); +#226174 = DIRECTION('',(0.,0.,1.)); +#226175 = ORIENTED_EDGE('',*,*,#226176,.F.); +#226176 = EDGE_CURVE('',#226137,#226169,#226177,.T.); +#226177 = CIRCLE('',#226178,0.100002891901); +#226178 = AXIS2_PLACEMENT_3D('',#226179,#226180,#226181); +#226179 = CARTESIAN_POINT('',(150.99999792896,-98.89999792896,1.51)); +#226180 = DIRECTION('',(0.,0.,-1.)); +#226181 = DIRECTION('',(0.980782347106,-0.195105068117,0.)); +#226182 = CYLINDRICAL_SURFACE('',#226183,0.100002891901); +#226183 = AXIS2_PLACEMENT_3D('',#226184,#226185,#226186); +#226184 = CARTESIAN_POINT('',(150.99999792896,-98.89999792896,1.51)); +#226185 = DIRECTION('',(0.,0.,-1.)); +#226186 = DIRECTION('',(0.980782347106,-0.195105068117,0.)); +#226187 = ADVANCED_FACE('',(#226188),#226213,.T.); +#226188 = FACE_BOUND('',#226189,.T.); +#226189 = EDGE_LOOP('',(#226190,#226191,#226199,#226207)); +#226190 = ORIENTED_EDGE('',*,*,#226168,.T.); +#226191 = ORIENTED_EDGE('',*,*,#226192,.T.); +#226192 = EDGE_CURVE('',#226160,#226193,#226195,.T.); +#226193 = VERTEX_POINT('',#226194); +#226194 = CARTESIAN_POINT('',(150.727208,-99.,1.545)); +#226195 = LINE('',#226196,#226197); +#226196 = CARTESIAN_POINT('',(151.019509,-98.998079,1.545)); +#226197 = VECTOR('',#226198,1.); +#226198 = DIRECTION('',(-0.999978405156,-6.571850648137E-03,0.)); +#226199 = ORIENTED_EDGE('',*,*,#226200,.F.); +#226200 = EDGE_CURVE('',#226201,#226193,#226203,.T.); +#226201 = VERTEX_POINT('',#226202); +#226202 = CARTESIAN_POINT('',(150.727208,-99.,1.51)); +#226203 = LINE('',#226204,#226205); +#226204 = CARTESIAN_POINT('',(150.727208,-99.,1.51)); +#226205 = VECTOR('',#226206,1.); +#226206 = DIRECTION('',(0.,0.,1.)); +#226207 = ORIENTED_EDGE('',*,*,#226208,.F.); +#226208 = EDGE_CURVE('',#226169,#226201,#226209,.T.); +#226209 = LINE('',#226210,#226211); +#226210 = CARTESIAN_POINT('',(151.019509,-98.998079,1.51)); +#226211 = VECTOR('',#226212,1.); +#226212 = DIRECTION('',(-0.999978405156,-6.571850648137E-03,0.)); +#226213 = PLANE('',#226214); +#226214 = AXIS2_PLACEMENT_3D('',#226215,#226216,#226217); +#226215 = CARTESIAN_POINT('',(151.019509,-98.998079,1.51)); +#226216 = DIRECTION('',(6.571850648137E-03,-0.999978405156,0.)); +#226217 = DIRECTION('',(-0.999978405156,-6.571850648137E-03,0.)); +#226218 = ADVANCED_FACE('',(#226219),#226244,.T.); +#226219 = FACE_BOUND('',#226220,.T.); +#226220 = EDGE_LOOP('',(#226221,#226222,#226230,#226238)); +#226221 = ORIENTED_EDGE('',*,*,#226200,.T.); +#226222 = ORIENTED_EDGE('',*,*,#226223,.T.); +#226223 = EDGE_CURVE('',#226193,#226224,#226226,.T.); +#226224 = VERTEX_POINT('',#226225); +#226225 = CARTESIAN_POINT('',(150.141343,-99.583147,1.545)); +#226226 = LINE('',#226227,#226228); +#226227 = CARTESIAN_POINT('',(150.727208,-99.,1.545)); +#226228 = VECTOR('',#226229,1.); +#226229 = DIRECTION('',(-0.708748917263,-0.705460822639,0.)); +#226230 = ORIENTED_EDGE('',*,*,#226231,.F.); +#226231 = EDGE_CURVE('',#226232,#226224,#226234,.T.); +#226232 = VERTEX_POINT('',#226233); +#226233 = CARTESIAN_POINT('',(150.141343,-99.583147,1.51)); +#226234 = LINE('',#226235,#226236); +#226235 = CARTESIAN_POINT('',(150.141343,-99.583147,1.51)); +#226236 = VECTOR('',#226237,1.); +#226237 = DIRECTION('',(0.,0.,1.)); +#226238 = ORIENTED_EDGE('',*,*,#226239,.F.); +#226239 = EDGE_CURVE('',#226201,#226232,#226240,.T.); +#226240 = LINE('',#226241,#226242); +#226241 = CARTESIAN_POINT('',(150.727208,-99.,1.51)); +#226242 = VECTOR('',#226243,1.); +#226243 = DIRECTION('',(-0.708748917263,-0.705460822639,0.)); +#226244 = PLANE('',#226245); +#226245 = AXIS2_PLACEMENT_3D('',#226246,#226247,#226248); +#226246 = CARTESIAN_POINT('',(150.727208,-99.,1.51)); +#226247 = DIRECTION('',(0.705460822639,-0.708748917263,0.)); +#226248 = DIRECTION('',(-0.708748917263,-0.705460822639,0.)); +#226249 = ADVANCED_FACE('',(#226250),#226275,.T.); +#226250 = FACE_BOUND('',#226251,.T.); +#226251 = EDGE_LOOP('',(#226252,#226253,#226261,#226269)); +#226252 = ORIENTED_EDGE('',*,*,#226231,.T.); +#226253 = ORIENTED_EDGE('',*,*,#226254,.T.); +#226254 = EDGE_CURVE('',#226224,#226255,#226257,.T.); +#226255 = VERTEX_POINT('',#226256); +#226256 = CARTESIAN_POINT('',(150.105295,-99.598079,1.545)); +#226257 = LINE('',#226258,#226259); +#226258 = CARTESIAN_POINT('',(150.141343,-99.583147,1.545)); +#226259 = VECTOR('',#226260,1.); +#226260 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#226261 = ORIENTED_EDGE('',*,*,#226262,.F.); +#226262 = EDGE_CURVE('',#226263,#226255,#226265,.T.); +#226263 = VERTEX_POINT('',#226264); +#226264 = CARTESIAN_POINT('',(150.105295,-99.598079,1.51)); +#226265 = LINE('',#226266,#226267); +#226266 = CARTESIAN_POINT('',(150.105295,-99.598079,1.51)); +#226267 = VECTOR('',#226268,1.); +#226268 = DIRECTION('',(0.,0.,1.)); +#226269 = ORIENTED_EDGE('',*,*,#226270,.F.); +#226270 = EDGE_CURVE('',#226232,#226263,#226271,.T.); +#226271 = LINE('',#226272,#226273); +#226272 = CARTESIAN_POINT('',(150.141343,-99.583147,1.51)); +#226273 = VECTOR('',#226274,1.); +#226274 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#226275 = PLANE('',#226276); +#226276 = AXIS2_PLACEMENT_3D('',#226277,#226278,#226279); +#226277 = CARTESIAN_POINT('',(150.141343,-99.583147,1.51)); +#226278 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226279 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#226280 = ADVANCED_FACE('',(#226281),#226306,.T.); +#226281 = FACE_BOUND('',#226282,.T.); +#226282 = EDGE_LOOP('',(#226283,#226284,#226292,#226300)); +#226283 = ORIENTED_EDGE('',*,*,#226262,.T.); +#226284 = ORIENTED_EDGE('',*,*,#226285,.T.); +#226285 = EDGE_CURVE('',#226255,#226286,#226288,.T.); +#226286 = VERTEX_POINT('',#226287); +#226287 = CARTESIAN_POINT('',(149.041422,-99.6,1.545)); +#226288 = LINE('',#226289,#226290); +#226289 = CARTESIAN_POINT('',(150.105295,-99.598079,1.545)); +#226290 = VECTOR('',#226291,1.); +#226291 = DIRECTION('',(-0.999998369788,-1.805663710197E-03,0.)); +#226292 = ORIENTED_EDGE('',*,*,#226293,.F.); +#226293 = EDGE_CURVE('',#226294,#226286,#226296,.T.); +#226294 = VERTEX_POINT('',#226295); +#226295 = CARTESIAN_POINT('',(149.041422,-99.6,1.51)); +#226296 = LINE('',#226297,#226298); +#226297 = CARTESIAN_POINT('',(149.041422,-99.6,1.51)); +#226298 = VECTOR('',#226299,1.); +#226299 = DIRECTION('',(0.,0.,1.)); +#226300 = ORIENTED_EDGE('',*,*,#226301,.F.); +#226301 = EDGE_CURVE('',#226263,#226294,#226302,.T.); +#226302 = LINE('',#226303,#226304); +#226303 = CARTESIAN_POINT('',(150.105295,-99.598079,1.51)); +#226304 = VECTOR('',#226305,1.); +#226305 = DIRECTION('',(-0.999998369788,-1.805663710197E-03,0.)); +#226306 = PLANE('',#226307); +#226307 = AXIS2_PLACEMENT_3D('',#226308,#226309,#226310); +#226308 = CARTESIAN_POINT('',(150.105295,-99.598079,1.51)); +#226309 = DIRECTION('',(1.805663710197E-03,-0.999998369788,0.)); +#226310 = DIRECTION('',(-0.999998369788,-1.805663710197E-03,0.)); +#226311 = ADVANCED_FACE('',(#226312),#226337,.T.); +#226312 = FACE_BOUND('',#226313,.T.); +#226313 = EDGE_LOOP('',(#226314,#226315,#226323,#226331)); +#226314 = ORIENTED_EDGE('',*,*,#226293,.T.); +#226315 = ORIENTED_EDGE('',*,*,#226316,.T.); +#226316 = EDGE_CURVE('',#226286,#226317,#226319,.T.); +#226317 = VERTEX_POINT('',#226318); +#226318 = CARTESIAN_POINT('',(148.391422,-100.25,1.545)); +#226319 = LINE('',#226320,#226321); +#226320 = CARTESIAN_POINT('',(149.041422,-99.6,1.545)); +#226321 = VECTOR('',#226322,1.); +#226322 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#226323 = ORIENTED_EDGE('',*,*,#226324,.F.); +#226324 = EDGE_CURVE('',#226325,#226317,#226327,.T.); +#226325 = VERTEX_POINT('',#226326); +#226326 = CARTESIAN_POINT('',(148.391422,-100.25,1.51)); +#226327 = LINE('',#226328,#226329); +#226328 = CARTESIAN_POINT('',(148.391422,-100.25,1.51)); +#226329 = VECTOR('',#226330,1.); +#226330 = DIRECTION('',(0.,0.,1.)); +#226331 = ORIENTED_EDGE('',*,*,#226332,.F.); +#226332 = EDGE_CURVE('',#226294,#226325,#226333,.T.); +#226333 = LINE('',#226334,#226335); +#226334 = CARTESIAN_POINT('',(149.041422,-99.6,1.51)); +#226335 = VECTOR('',#226336,1.); +#226336 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#226337 = PLANE('',#226338); +#226338 = AXIS2_PLACEMENT_3D('',#226339,#226340,#226341); +#226339 = CARTESIAN_POINT('',(149.041422,-99.6,1.51)); +#226340 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#226341 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#226342 = ADVANCED_FACE('',(#226343),#226368,.T.); +#226343 = FACE_BOUND('',#226344,.T.); +#226344 = EDGE_LOOP('',(#226345,#226346,#226354,#226362)); +#226345 = ORIENTED_EDGE('',*,*,#226324,.T.); +#226346 = ORIENTED_EDGE('',*,*,#226347,.T.); +#226347 = EDGE_CURVE('',#226317,#226348,#226350,.T.); +#226348 = VERTEX_POINT('',#226349); +#226349 = CARTESIAN_POINT('',(150.191422,-102.05,1.545)); +#226350 = LINE('',#226351,#226352); +#226351 = CARTESIAN_POINT('',(148.391422,-100.25,1.545)); +#226352 = VECTOR('',#226353,1.); +#226353 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#226354 = ORIENTED_EDGE('',*,*,#226355,.F.); +#226355 = EDGE_CURVE('',#226356,#226348,#226358,.T.); +#226356 = VERTEX_POINT('',#226357); +#226357 = CARTESIAN_POINT('',(150.191422,-102.05,1.51)); +#226358 = LINE('',#226359,#226360); +#226359 = CARTESIAN_POINT('',(150.191422,-102.05,1.51)); +#226360 = VECTOR('',#226361,1.); +#226361 = DIRECTION('',(0.,0.,1.)); +#226362 = ORIENTED_EDGE('',*,*,#226363,.F.); +#226363 = EDGE_CURVE('',#226325,#226356,#226364,.T.); +#226364 = LINE('',#226365,#226366); +#226365 = CARTESIAN_POINT('',(148.391422,-100.25,1.51)); +#226366 = VECTOR('',#226367,1.); +#226367 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#226368 = PLANE('',#226369); +#226369 = AXIS2_PLACEMENT_3D('',#226370,#226371,#226372); +#226370 = CARTESIAN_POINT('',(148.391422,-100.25,1.51)); +#226371 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#226372 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#226373 = ADVANCED_FACE('',(#226374),#226399,.T.); +#226374 = FACE_BOUND('',#226375,.T.); +#226375 = EDGE_LOOP('',(#226376,#226377,#226385,#226393)); +#226376 = ORIENTED_EDGE('',*,*,#226355,.T.); +#226377 = ORIENTED_EDGE('',*,*,#226378,.T.); +#226378 = EDGE_CURVE('',#226348,#226379,#226381,.T.); +#226379 = VERTEX_POINT('',#226380); +#226380 = CARTESIAN_POINT('',(151.019509,-102.051921,1.545)); +#226381 = LINE('',#226382,#226383); +#226382 = CARTESIAN_POINT('',(150.191422,-102.05,1.545)); +#226383 = VECTOR('',#226384,1.); +#226384 = DIRECTION('',(0.999997309264,-2.319798319612E-03,0.)); +#226385 = ORIENTED_EDGE('',*,*,#226386,.F.); +#226386 = EDGE_CURVE('',#226387,#226379,#226389,.T.); +#226387 = VERTEX_POINT('',#226388); +#226388 = CARTESIAN_POINT('',(151.019509,-102.051921,1.51)); +#226389 = LINE('',#226390,#226391); +#226390 = CARTESIAN_POINT('',(151.019509,-102.051921,1.51)); +#226391 = VECTOR('',#226392,1.); +#226392 = DIRECTION('',(0.,0.,1.)); +#226393 = ORIENTED_EDGE('',*,*,#226394,.F.); +#226394 = EDGE_CURVE('',#226356,#226387,#226395,.T.); +#226395 = LINE('',#226396,#226397); +#226396 = CARTESIAN_POINT('',(150.191422,-102.05,1.51)); +#226397 = VECTOR('',#226398,1.); +#226398 = DIRECTION('',(0.999997309264,-2.319798319612E-03,0.)); +#226399 = PLANE('',#226400); +#226400 = AXIS2_PLACEMENT_3D('',#226401,#226402,#226403); +#226401 = CARTESIAN_POINT('',(150.191422,-102.05,1.51)); +#226402 = DIRECTION('',(2.319798319612E-03,0.999997309264,-0.)); +#226403 = DIRECTION('',(0.999997309264,-2.319798319612E-03,0.)); +#226404 = ADVANCED_FACE('',(#226405),#226432,.T.); +#226405 = FACE_BOUND('',#226406,.T.); +#226406 = EDGE_LOOP('',(#226407,#226408,#226417,#226425)); +#226407 = ORIENTED_EDGE('',*,*,#226386,.T.); +#226408 = ORIENTED_EDGE('',*,*,#226409,.T.); +#226409 = EDGE_CURVE('',#226379,#226410,#226412,.T.); +#226410 = VERTEX_POINT('',#226411); +#226411 = CARTESIAN_POINT('',(151.098079,-102.130491,1.545)); +#226412 = CIRCLE('',#226413,0.100002891901); +#226413 = AXIS2_PLACEMENT_3D('',#226414,#226415,#226416); +#226414 = CARTESIAN_POINT('',(150.99999792896,-102.150002071,1.545)); +#226415 = DIRECTION('',(0.,0.,-1.)); +#226416 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#226417 = ORIENTED_EDGE('',*,*,#226418,.F.); +#226418 = EDGE_CURVE('',#226419,#226410,#226421,.T.); +#226419 = VERTEX_POINT('',#226420); +#226420 = CARTESIAN_POINT('',(151.098079,-102.130491,1.51)); +#226421 = LINE('',#226422,#226423); +#226422 = CARTESIAN_POINT('',(151.098079,-102.130491,1.51)); +#226423 = VECTOR('',#226424,1.); +#226424 = DIRECTION('',(0.,0.,1.)); +#226425 = ORIENTED_EDGE('',*,*,#226426,.F.); +#226426 = EDGE_CURVE('',#226387,#226419,#226427,.T.); +#226427 = CIRCLE('',#226428,0.100002891901); +#226428 = AXIS2_PLACEMENT_3D('',#226429,#226430,#226431); +#226429 = CARTESIAN_POINT('',(150.99999792896,-102.150002071,1.51)); +#226430 = DIRECTION('',(0.,0.,-1.)); +#226431 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#226432 = CYLINDRICAL_SURFACE('',#226433,0.100002891901); +#226433 = AXIS2_PLACEMENT_3D('',#226434,#226435,#226436); +#226434 = CARTESIAN_POINT('',(150.99999792896,-102.150002071,1.51)); +#226435 = DIRECTION('',(0.,0.,-1.)); +#226436 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#226437 = ADVANCED_FACE('',(#226438),#226463,.T.); +#226438 = FACE_BOUND('',#226439,.T.); +#226439 = EDGE_LOOP('',(#226440,#226441,#226449,#226457)); +#226440 = ORIENTED_EDGE('',*,*,#226418,.T.); +#226441 = ORIENTED_EDGE('',*,*,#226442,.T.); +#226442 = EDGE_CURVE('',#226410,#226443,#226445,.T.); +#226443 = VERTEX_POINT('',#226444); +#226444 = CARTESIAN_POINT('',(151.1,-102.372792,1.545)); +#226445 = LINE('',#226446,#226447); +#226446 = CARTESIAN_POINT('',(151.098079,-102.130491,1.545)); +#226447 = VECTOR('',#226448,1.); +#226448 = DIRECTION('',(7.92790632303E-03,-0.999968573657,0.)); +#226449 = ORIENTED_EDGE('',*,*,#226450,.F.); +#226450 = EDGE_CURVE('',#226451,#226443,#226453,.T.); +#226451 = VERTEX_POINT('',#226452); +#226452 = CARTESIAN_POINT('',(151.1,-102.372792,1.51)); +#226453 = LINE('',#226454,#226455); +#226454 = CARTESIAN_POINT('',(151.1,-102.372792,1.51)); +#226455 = VECTOR('',#226456,1.); +#226456 = DIRECTION('',(0.,0.,1.)); +#226457 = ORIENTED_EDGE('',*,*,#226458,.F.); +#226458 = EDGE_CURVE('',#226419,#226451,#226459,.T.); +#226459 = LINE('',#226460,#226461); +#226460 = CARTESIAN_POINT('',(151.098079,-102.130491,1.51)); +#226461 = VECTOR('',#226462,1.); +#226462 = DIRECTION('',(7.92790632303E-03,-0.999968573657,0.)); +#226463 = PLANE('',#226464); +#226464 = AXIS2_PLACEMENT_3D('',#226465,#226466,#226467); +#226465 = CARTESIAN_POINT('',(151.098079,-102.130491,1.51)); +#226466 = DIRECTION('',(0.999968573657,7.92790632303E-03,-0.)); +#226467 = DIRECTION('',(7.92790632303E-03,-0.999968573657,0.)); +#226468 = ADVANCED_FACE('',(#226469),#226494,.T.); +#226469 = FACE_BOUND('',#226470,.T.); +#226470 = EDGE_LOOP('',(#226471,#226472,#226480,#226488)); +#226471 = ORIENTED_EDGE('',*,*,#226450,.T.); +#226472 = ORIENTED_EDGE('',*,*,#226473,.T.); +#226473 = EDGE_CURVE('',#226443,#226474,#226476,.T.); +#226474 = VERTEX_POINT('',#226475); +#226475 = CARTESIAN_POINT('',(153.283147,-104.558657,1.545)); +#226476 = LINE('',#226477,#226478); +#226477 = CARTESIAN_POINT('',(151.1,-102.372792,1.545)); +#226478 = VECTOR('',#226479,1.); +#226479 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#226480 = ORIENTED_EDGE('',*,*,#226481,.F.); +#226481 = EDGE_CURVE('',#226482,#226474,#226484,.T.); +#226482 = VERTEX_POINT('',#226483); +#226483 = CARTESIAN_POINT('',(153.283147,-104.558657,1.51)); +#226484 = LINE('',#226485,#226486); +#226485 = CARTESIAN_POINT('',(153.283147,-104.558657,1.51)); +#226486 = VECTOR('',#226487,1.); +#226487 = DIRECTION('',(0.,0.,1.)); +#226488 = ORIENTED_EDGE('',*,*,#226489,.F.); +#226489 = EDGE_CURVE('',#226451,#226482,#226490,.T.); +#226490 = LINE('',#226491,#226492); +#226491 = CARTESIAN_POINT('',(151.1,-102.372792,1.51)); +#226492 = VECTOR('',#226493,1.); +#226493 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#226494 = PLANE('',#226495); +#226495 = AXIS2_PLACEMENT_3D('',#226496,#226497,#226498); +#226496 = CARTESIAN_POINT('',(151.1,-102.372792,1.51)); +#226497 = DIRECTION('',(0.707546541489,0.70666674722,-0.)); +#226498 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#226499 = ADVANCED_FACE('',(#226500),#226525,.T.); +#226500 = FACE_BOUND('',#226501,.T.); +#226501 = EDGE_LOOP('',(#226502,#226503,#226511,#226519)); +#226502 = ORIENTED_EDGE('',*,*,#226481,.T.); +#226503 = ORIENTED_EDGE('',*,*,#226504,.T.); +#226504 = EDGE_CURVE('',#226474,#226505,#226507,.T.); +#226505 = VERTEX_POINT('',#226506); +#226506 = CARTESIAN_POINT('',(153.298079,-104.594705,1.545)); +#226507 = LINE('',#226508,#226509); +#226508 = CARTESIAN_POINT('',(153.283147,-104.558657,1.545)); +#226509 = VECTOR('',#226510,1.); +#226510 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226511 = ORIENTED_EDGE('',*,*,#226512,.F.); +#226512 = EDGE_CURVE('',#226513,#226505,#226515,.T.); +#226513 = VERTEX_POINT('',#226514); +#226514 = CARTESIAN_POINT('',(153.298079,-104.594705,1.51)); +#226515 = LINE('',#226516,#226517); +#226516 = CARTESIAN_POINT('',(153.298079,-104.594705,1.51)); +#226517 = VECTOR('',#226518,1.); +#226518 = DIRECTION('',(0.,0.,1.)); +#226519 = ORIENTED_EDGE('',*,*,#226520,.F.); +#226520 = EDGE_CURVE('',#226482,#226513,#226521,.T.); +#226521 = LINE('',#226522,#226523); +#226522 = CARTESIAN_POINT('',(153.283147,-104.558657,1.51)); +#226523 = VECTOR('',#226524,1.); +#226524 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226525 = PLANE('',#226526); +#226526 = AXIS2_PLACEMENT_3D('',#226527,#226528,#226529); +#226527 = CARTESIAN_POINT('',(153.283147,-104.558657,1.51)); +#226528 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#226529 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226530 = ADVANCED_FACE('',(#226531),#226556,.T.); +#226531 = FACE_BOUND('',#226532,.T.); +#226532 = EDGE_LOOP('',(#226533,#226534,#226542,#226550)); +#226533 = ORIENTED_EDGE('',*,*,#226512,.T.); +#226534 = ORIENTED_EDGE('',*,*,#226535,.T.); +#226535 = EDGE_CURVE('',#226505,#226536,#226538,.T.); +#226536 = VERTEX_POINT('',#226537); +#226537 = CARTESIAN_POINT('',(153.3,-111.494363,1.545)); +#226538 = LINE('',#226539,#226540); +#226539 = CARTESIAN_POINT('',(153.298079,-104.594705,1.545)); +#226540 = VECTOR('',#226541,1.); +#226541 = DIRECTION('',(2.784195862396E-04,-0.999999961241,0.)); +#226542 = ORIENTED_EDGE('',*,*,#226543,.F.); +#226543 = EDGE_CURVE('',#226544,#226536,#226546,.T.); +#226544 = VERTEX_POINT('',#226545); +#226545 = CARTESIAN_POINT('',(153.3,-111.494363,1.51)); +#226546 = LINE('',#226547,#226548); +#226547 = CARTESIAN_POINT('',(153.3,-111.494363,1.51)); +#226548 = VECTOR('',#226549,1.); +#226549 = DIRECTION('',(0.,0.,1.)); +#226550 = ORIENTED_EDGE('',*,*,#226551,.F.); +#226551 = EDGE_CURVE('',#226513,#226544,#226552,.T.); +#226552 = LINE('',#226553,#226554); +#226553 = CARTESIAN_POINT('',(153.298079,-104.594705,1.51)); +#226554 = VECTOR('',#226555,1.); +#226555 = DIRECTION('',(2.784195862396E-04,-0.999999961241,0.)); +#226556 = PLANE('',#226557); +#226557 = AXIS2_PLACEMENT_3D('',#226558,#226559,#226560); +#226558 = CARTESIAN_POINT('',(153.298079,-104.594705,1.51)); +#226559 = DIRECTION('',(0.999999961241,2.784195862396E-04,-0.)); +#226560 = DIRECTION('',(2.784195862396E-04,-0.999999961241,0.)); +#226561 = ADVANCED_FACE('',(#226562),#226587,.T.); +#226562 = FACE_BOUND('',#226563,.T.); +#226563 = EDGE_LOOP('',(#226564,#226565,#226573,#226581)); +#226564 = ORIENTED_EDGE('',*,*,#226543,.T.); +#226565 = ORIENTED_EDGE('',*,*,#226566,.T.); +#226566 = EDGE_CURVE('',#226536,#226567,#226569,.T.); +#226567 = VERTEX_POINT('',#226568); +#226568 = CARTESIAN_POINT('',(153.833147,-112.030228,1.545)); +#226569 = LINE('',#226570,#226571); +#226570 = CARTESIAN_POINT('',(153.3,-111.494363,1.545)); +#226571 = VECTOR('',#226572,1.); +#226572 = DIRECTION('',(0.705306658011,-0.708902333305,0.)); +#226573 = ORIENTED_EDGE('',*,*,#226574,.F.); +#226574 = EDGE_CURVE('',#226575,#226567,#226577,.T.); +#226575 = VERTEX_POINT('',#226576); +#226576 = CARTESIAN_POINT('',(153.833147,-112.030228,1.51)); +#226577 = LINE('',#226578,#226579); +#226578 = CARTESIAN_POINT('',(153.833147,-112.030228,1.51)); +#226579 = VECTOR('',#226580,1.); +#226580 = DIRECTION('',(0.,0.,1.)); +#226581 = ORIENTED_EDGE('',*,*,#226582,.F.); +#226582 = EDGE_CURVE('',#226544,#226575,#226583,.T.); +#226583 = LINE('',#226584,#226585); +#226584 = CARTESIAN_POINT('',(153.3,-111.494363,1.51)); +#226585 = VECTOR('',#226586,1.); +#226586 = DIRECTION('',(0.705306658011,-0.708902333305,0.)); +#226587 = PLANE('',#226588); +#226588 = AXIS2_PLACEMENT_3D('',#226589,#226590,#226591); +#226589 = CARTESIAN_POINT('',(153.3,-111.494363,1.51)); +#226590 = DIRECTION('',(0.708902333305,0.705306658011,-0.)); +#226591 = DIRECTION('',(0.705306658011,-0.708902333305,0.)); +#226592 = ADVANCED_FACE('',(#226593),#226618,.T.); +#226593 = FACE_BOUND('',#226594,.T.); +#226594 = EDGE_LOOP('',(#226595,#226596,#226604,#226612)); +#226595 = ORIENTED_EDGE('',*,*,#226574,.T.); +#226596 = ORIENTED_EDGE('',*,*,#226597,.T.); +#226597 = EDGE_CURVE('',#226567,#226598,#226600,.T.); +#226598 = VERTEX_POINT('',#226599); +#226599 = CARTESIAN_POINT('',(153.848079,-112.066276,1.545)); +#226600 = LINE('',#226601,#226602); +#226601 = CARTESIAN_POINT('',(153.833147,-112.030228,1.545)); +#226602 = VECTOR('',#226603,1.); +#226603 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226604 = ORIENTED_EDGE('',*,*,#226605,.F.); +#226605 = EDGE_CURVE('',#226606,#226598,#226608,.T.); +#226606 = VERTEX_POINT('',#226607); +#226607 = CARTESIAN_POINT('',(153.848079,-112.066276,1.51)); +#226608 = LINE('',#226609,#226610); +#226609 = CARTESIAN_POINT('',(153.848079,-112.066276,1.51)); +#226610 = VECTOR('',#226611,1.); +#226611 = DIRECTION('',(0.,0.,1.)); +#226612 = ORIENTED_EDGE('',*,*,#226613,.F.); +#226613 = EDGE_CURVE('',#226575,#226606,#226614,.T.); +#226614 = LINE('',#226615,#226616); +#226615 = CARTESIAN_POINT('',(153.833147,-112.030228,1.51)); +#226616 = VECTOR('',#226617,1.); +#226617 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226618 = PLANE('',#226619); +#226619 = AXIS2_PLACEMENT_3D('',#226620,#226621,#226622); +#226620 = CARTESIAN_POINT('',(153.833147,-112.030228,1.51)); +#226621 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#226622 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#226623 = ADVANCED_FACE('',(#226624),#226649,.T.); +#226624 = FACE_BOUND('',#226625,.T.); +#226625 = EDGE_LOOP('',(#226626,#226627,#226635,#226643)); +#226626 = ORIENTED_EDGE('',*,*,#226605,.T.); +#226627 = ORIENTED_EDGE('',*,*,#226628,.T.); +#226628 = EDGE_CURVE('',#226598,#226629,#226631,.T.); +#226629 = VERTEX_POINT('',#226630); +#226630 = CARTESIAN_POINT('',(153.848079,-112.933724,1.545)); +#226631 = LINE('',#226632,#226633); +#226632 = CARTESIAN_POINT('',(153.848079,-112.066276,1.545)); +#226633 = VECTOR('',#226634,1.); +#226634 = DIRECTION('',(0.,-1.,0.)); +#226635 = ORIENTED_EDGE('',*,*,#226636,.F.); +#226636 = EDGE_CURVE('',#226637,#226629,#226639,.T.); +#226637 = VERTEX_POINT('',#226638); +#226638 = CARTESIAN_POINT('',(153.848079,-112.933724,1.51)); +#226639 = LINE('',#226640,#226641); +#226640 = CARTESIAN_POINT('',(153.848079,-112.933724,1.51)); +#226641 = VECTOR('',#226642,1.); +#226642 = DIRECTION('',(0.,0.,1.)); +#226643 = ORIENTED_EDGE('',*,*,#226644,.F.); +#226644 = EDGE_CURVE('',#226606,#226637,#226645,.T.); +#226645 = LINE('',#226646,#226647); +#226646 = CARTESIAN_POINT('',(153.848079,-112.066276,1.51)); +#226647 = VECTOR('',#226648,1.); +#226648 = DIRECTION('',(0.,-1.,0.)); +#226649 = PLANE('',#226650); +#226650 = AXIS2_PLACEMENT_3D('',#226651,#226652,#226653); +#226651 = CARTESIAN_POINT('',(153.848079,-112.066276,1.51)); +#226652 = DIRECTION('',(1.,0.,-0.)); +#226653 = DIRECTION('',(0.,-1.,0.)); +#226654 = ADVANCED_FACE('',(#226655),#226680,.T.); +#226655 = FACE_BOUND('',#226656,.T.); +#226656 = EDGE_LOOP('',(#226657,#226658,#226666,#226674)); +#226657 = ORIENTED_EDGE('',*,*,#226636,.T.); +#226658 = ORIENTED_EDGE('',*,*,#226659,.T.); +#226659 = EDGE_CURVE('',#226629,#226660,#226662,.T.); +#226660 = VERTEX_POINT('',#226661); +#226661 = CARTESIAN_POINT('',(153.833147,-112.969773,1.545)); +#226662 = LINE('',#226663,#226664); +#226663 = CARTESIAN_POINT('',(153.848079,-112.933724,1.545)); +#226664 = VECTOR('',#226665,1.); +#226665 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#226666 = ORIENTED_EDGE('',*,*,#226667,.F.); +#226667 = EDGE_CURVE('',#226668,#226660,#226670,.T.); +#226668 = VERTEX_POINT('',#226669); +#226669 = CARTESIAN_POINT('',(153.833147,-112.969773,1.51)); +#226670 = LINE('',#226671,#226672); +#226671 = CARTESIAN_POINT('',(153.833147,-112.969773,1.51)); +#226672 = VECTOR('',#226673,1.); +#226673 = DIRECTION('',(0.,0.,1.)); +#226674 = ORIENTED_EDGE('',*,*,#226675,.F.); +#226675 = EDGE_CURVE('',#226637,#226668,#226676,.T.); +#226676 = LINE('',#226677,#226678); +#226677 = CARTESIAN_POINT('',(153.848079,-112.933724,1.51)); +#226678 = VECTOR('',#226679,1.); +#226679 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#226680 = PLANE('',#226681); +#226681 = AXIS2_PLACEMENT_3D('',#226682,#226683,#226684); +#226682 = CARTESIAN_POINT('',(153.848079,-112.933724,1.51)); +#226683 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#226684 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#226685 = ADVANCED_FACE('',(#226686),#226711,.T.); +#226686 = FACE_BOUND('',#226687,.T.); +#226687 = EDGE_LOOP('',(#226688,#226689,#226697,#226705)); +#226688 = ORIENTED_EDGE('',*,*,#226667,.T.); +#226689 = ORIENTED_EDGE('',*,*,#226690,.T.); +#226690 = EDGE_CURVE('',#226660,#226691,#226693,.T.); +#226691 = VERTEX_POINT('',#226692); +#226692 = CARTESIAN_POINT('',(153.3,-113.505636,1.545)); +#226693 = LINE('',#226694,#226695); +#226694 = CARTESIAN_POINT('',(153.833147,-112.969773,1.545)); +#226695 = VECTOR('',#226696,1.); +#226696 = DIRECTION('',(-0.705307980907,-0.708901017117,0.)); +#226697 = ORIENTED_EDGE('',*,*,#226698,.F.); +#226698 = EDGE_CURVE('',#226699,#226691,#226701,.T.); +#226699 = VERTEX_POINT('',#226700); +#226700 = CARTESIAN_POINT('',(153.3,-113.505636,1.51)); +#226701 = LINE('',#226702,#226703); +#226702 = CARTESIAN_POINT('',(153.3,-113.505636,1.51)); +#226703 = VECTOR('',#226704,1.); +#226704 = DIRECTION('',(0.,0.,1.)); +#226705 = ORIENTED_EDGE('',*,*,#226706,.F.); +#226706 = EDGE_CURVE('',#226668,#226699,#226707,.T.); +#226707 = LINE('',#226708,#226709); +#226708 = CARTESIAN_POINT('',(153.833147,-112.969773,1.51)); +#226709 = VECTOR('',#226710,1.); +#226710 = DIRECTION('',(-0.705307980907,-0.708901017117,0.)); +#226711 = PLANE('',#226712); +#226712 = AXIS2_PLACEMENT_3D('',#226713,#226714,#226715); +#226713 = CARTESIAN_POINT('',(153.833147,-112.969773,1.51)); +#226714 = DIRECTION('',(0.708901017117,-0.705307980907,0.)); +#226715 = DIRECTION('',(-0.705307980907,-0.708901017117,0.)); +#226716 = ADVANCED_FACE('',(#226717),#226742,.T.); +#226717 = FACE_BOUND('',#226718,.T.); +#226718 = EDGE_LOOP('',(#226719,#226720,#226728,#226736)); +#226719 = ORIENTED_EDGE('',*,*,#226698,.T.); +#226720 = ORIENTED_EDGE('',*,*,#226721,.T.); +#226721 = EDGE_CURVE('',#226691,#226722,#226724,.T.); +#226722 = VERTEX_POINT('',#226723); +#226723 = CARTESIAN_POINT('',(153.298079,-141.819509,1.545)); +#226724 = LINE('',#226725,#226726); +#226725 = CARTESIAN_POINT('',(153.3,-113.505636,1.545)); +#226726 = VECTOR('',#226727,1.); +#226727 = DIRECTION('',(-6.784659928328E-05,-0.999999997698,0.)); +#226728 = ORIENTED_EDGE('',*,*,#226729,.F.); +#226729 = EDGE_CURVE('',#226730,#226722,#226732,.T.); +#226730 = VERTEX_POINT('',#226731); +#226731 = CARTESIAN_POINT('',(153.298079,-141.819509,1.51)); +#226732 = LINE('',#226733,#226734); +#226733 = CARTESIAN_POINT('',(153.298079,-141.819509,1.51)); +#226734 = VECTOR('',#226735,1.); +#226735 = DIRECTION('',(0.,0.,1.)); +#226736 = ORIENTED_EDGE('',*,*,#226737,.F.); +#226737 = EDGE_CURVE('',#226699,#226730,#226738,.T.); +#226738 = LINE('',#226739,#226740); +#226739 = CARTESIAN_POINT('',(153.3,-113.505636,1.51)); +#226740 = VECTOR('',#226741,1.); +#226741 = DIRECTION('',(-6.784659928328E-05,-0.999999997698,0.)); +#226742 = PLANE('',#226743); +#226743 = AXIS2_PLACEMENT_3D('',#226744,#226745,#226746); +#226744 = CARTESIAN_POINT('',(153.3,-113.505636,1.51)); +#226745 = DIRECTION('',(0.999999997698,-6.784659928328E-05,0.)); +#226746 = DIRECTION('',(-6.784659928328E-05,-0.999999997698,0.)); +#226747 = ADVANCED_FACE('',(#226748),#226773,.T.); +#226748 = FACE_BOUND('',#226749,.T.); +#226749 = EDGE_LOOP('',(#226750,#226751,#226759,#226767)); +#226750 = ORIENTED_EDGE('',*,*,#226729,.T.); +#226751 = ORIENTED_EDGE('',*,*,#226752,.T.); +#226752 = EDGE_CURVE('',#226722,#226753,#226755,.T.); +#226753 = VERTEX_POINT('',#226754); +#226754 = CARTESIAN_POINT('',(153.283147,-141.855557,1.545)); +#226755 = LINE('',#226756,#226757); +#226756 = CARTESIAN_POINT('',(153.298079,-141.819509,1.545)); +#226757 = VECTOR('',#226758,1.); +#226758 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#226759 = ORIENTED_EDGE('',*,*,#226760,.F.); +#226760 = EDGE_CURVE('',#226761,#226753,#226763,.T.); +#226761 = VERTEX_POINT('',#226762); +#226762 = CARTESIAN_POINT('',(153.283147,-141.855557,1.51)); +#226763 = LINE('',#226764,#226765); +#226764 = CARTESIAN_POINT('',(153.283147,-141.855557,1.51)); +#226765 = VECTOR('',#226766,1.); +#226766 = DIRECTION('',(0.,0.,1.)); +#226767 = ORIENTED_EDGE('',*,*,#226768,.F.); +#226768 = EDGE_CURVE('',#226730,#226761,#226769,.T.); +#226769 = LINE('',#226770,#226771); +#226770 = CARTESIAN_POINT('',(153.298079,-141.819509,1.51)); +#226771 = VECTOR('',#226772,1.); +#226772 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#226773 = PLANE('',#226774); +#226774 = AXIS2_PLACEMENT_3D('',#226775,#226776,#226777); +#226775 = CARTESIAN_POINT('',(153.298079,-141.819509,1.51)); +#226776 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#226777 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#226778 = ADVANCED_FACE('',(#226779),#226804,.T.); +#226779 = FACE_BOUND('',#226780,.T.); +#226780 = EDGE_LOOP('',(#226781,#226782,#226790,#226798)); +#226781 = ORIENTED_EDGE('',*,*,#226760,.T.); +#226782 = ORIENTED_EDGE('',*,*,#226783,.T.); +#226783 = EDGE_CURVE('',#226753,#226784,#226786,.T.); +#226784 = VERTEX_POINT('',#226785); +#226785 = CARTESIAN_POINT('',(148.35,-146.791422,1.545)); +#226786 = LINE('',#226787,#226788); +#226787 = CARTESIAN_POINT('',(153.283147,-141.855557,1.545)); +#226788 = VECTOR('',#226789,1.); +#226789 = DIRECTION('',(-0.706912011861,-0.707301496879,0.)); +#226790 = ORIENTED_EDGE('',*,*,#226791,.F.); +#226791 = EDGE_CURVE('',#226792,#226784,#226794,.T.); +#226792 = VERTEX_POINT('',#226793); +#226793 = CARTESIAN_POINT('',(148.35,-146.791422,1.51)); +#226794 = LINE('',#226795,#226796); +#226795 = CARTESIAN_POINT('',(148.35,-146.791422,1.51)); +#226796 = VECTOR('',#226797,1.); +#226797 = DIRECTION('',(0.,0.,1.)); +#226798 = ORIENTED_EDGE('',*,*,#226799,.F.); +#226799 = EDGE_CURVE('',#226761,#226792,#226800,.T.); +#226800 = LINE('',#226801,#226802); +#226801 = CARTESIAN_POINT('',(153.283147,-141.855557,1.51)); +#226802 = VECTOR('',#226803,1.); +#226803 = DIRECTION('',(-0.706912011861,-0.707301496879,0.)); +#226804 = PLANE('',#226805); +#226805 = AXIS2_PLACEMENT_3D('',#226806,#226807,#226808); +#226806 = CARTESIAN_POINT('',(153.283147,-141.855557,1.51)); +#226807 = DIRECTION('',(0.707301496879,-0.706912011861,0.)); +#226808 = DIRECTION('',(-0.706912011861,-0.707301496879,0.)); +#226809 = ADVANCED_FACE('',(#226810),#226835,.T.); +#226810 = FACE_BOUND('',#226811,.T.); +#226811 = EDGE_LOOP('',(#226812,#226813,#226821,#226829)); +#226812 = ORIENTED_EDGE('',*,*,#226791,.T.); +#226813 = ORIENTED_EDGE('',*,*,#226814,.T.); +#226814 = EDGE_CURVE('',#226784,#226815,#226817,.T.); +#226815 = VERTEX_POINT('',#226816); +#226816 = CARTESIAN_POINT('',(148.348079,-152.259509,1.545)); +#226817 = LINE('',#226818,#226819); +#226818 = CARTESIAN_POINT('',(148.35,-146.791422,1.545)); +#226819 = VECTOR('',#226820,1.); +#226820 = DIRECTION('',(-3.513111407037E-04,-0.99999993829,0.)); +#226821 = ORIENTED_EDGE('',*,*,#226822,.F.); +#226822 = EDGE_CURVE('',#226823,#226815,#226825,.T.); +#226823 = VERTEX_POINT('',#226824); +#226824 = CARTESIAN_POINT('',(148.348079,-152.259509,1.51)); +#226825 = LINE('',#226826,#226827); +#226826 = CARTESIAN_POINT('',(148.348079,-152.259509,1.51)); +#226827 = VECTOR('',#226828,1.); +#226828 = DIRECTION('',(0.,0.,1.)); +#226829 = ORIENTED_EDGE('',*,*,#226830,.F.); +#226830 = EDGE_CURVE('',#226792,#226823,#226831,.T.); +#226831 = LINE('',#226832,#226833); +#226832 = CARTESIAN_POINT('',(148.35,-146.791422,1.51)); +#226833 = VECTOR('',#226834,1.); +#226834 = DIRECTION('',(-3.513111407037E-04,-0.99999993829,0.)); +#226835 = PLANE('',#226836); +#226836 = AXIS2_PLACEMENT_3D('',#226837,#226838,#226839); +#226837 = CARTESIAN_POINT('',(148.35,-146.791422,1.51)); +#226838 = DIRECTION('',(0.99999993829,-3.513111407037E-04,0.)); +#226839 = DIRECTION('',(-3.513111407037E-04,-0.99999993829,0.)); +#226840 = ADVANCED_FACE('',(#226841),#226868,.T.); +#226841 = FACE_BOUND('',#226842,.T.); +#226842 = EDGE_LOOP('',(#226843,#226844,#226853,#226861)); +#226843 = ORIENTED_EDGE('',*,*,#226822,.T.); +#226844 = ORIENTED_EDGE('',*,*,#226845,.T.); +#226845 = EDGE_CURVE('',#226815,#226846,#226848,.T.); +#226846 = VERTEX_POINT('',#226847); +#226847 = CARTESIAN_POINT('',(148.151921,-152.259509,1.545)); +#226848 = CIRCLE('',#226849,0.100000456609); +#226849 = AXIS2_PLACEMENT_3D('',#226850,#226851,#226852); +#226850 = CARTESIAN_POINT('',(148.25,-152.24,1.545)); +#226851 = DIRECTION('',(-0.,0.,-1.)); +#226852 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#226853 = ORIENTED_EDGE('',*,*,#226854,.F.); +#226854 = EDGE_CURVE('',#226855,#226846,#226857,.T.); +#226855 = VERTEX_POINT('',#226856); +#226856 = CARTESIAN_POINT('',(148.151921,-152.259509,1.51)); +#226857 = LINE('',#226858,#226859); +#226858 = CARTESIAN_POINT('',(148.151921,-152.259509,1.51)); +#226859 = VECTOR('',#226860,1.); +#226860 = DIRECTION('',(0.,0.,1.)); +#226861 = ORIENTED_EDGE('',*,*,#226862,.F.); +#226862 = EDGE_CURVE('',#226823,#226855,#226863,.T.); +#226863 = CIRCLE('',#226864,0.100000456609); +#226864 = AXIS2_PLACEMENT_3D('',#226865,#226866,#226867); +#226865 = CARTESIAN_POINT('',(148.25,-152.24,1.51)); +#226866 = DIRECTION('',(-0.,0.,-1.)); +#226867 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#226868 = CYLINDRICAL_SURFACE('',#226869,0.100000456609); +#226869 = AXIS2_PLACEMENT_3D('',#226870,#226871,#226872); +#226870 = CARTESIAN_POINT('',(148.25,-152.24,1.51)); +#226871 = DIRECTION('',(-0.,0.,-1.)); +#226872 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#226873 = ADVANCED_FACE('',(#226874),#226899,.T.); +#226874 = FACE_BOUND('',#226875,.T.); +#226875 = EDGE_LOOP('',(#226876,#226877,#226885,#226893)); +#226876 = ORIENTED_EDGE('',*,*,#226854,.T.); +#226877 = ORIENTED_EDGE('',*,*,#226878,.T.); +#226878 = EDGE_CURVE('',#226846,#226879,#226881,.T.); +#226879 = VERTEX_POINT('',#226880); +#226880 = CARTESIAN_POINT('',(148.151921,-146.730491,1.545)); +#226881 = LINE('',#226882,#226883); +#226882 = CARTESIAN_POINT('',(148.151921,-152.259509,1.545)); +#226883 = VECTOR('',#226884,1.); +#226884 = DIRECTION('',(0.,1.,0.)); +#226885 = ORIENTED_EDGE('',*,*,#226886,.F.); +#226886 = EDGE_CURVE('',#226887,#226879,#226889,.T.); +#226887 = VERTEX_POINT('',#226888); +#226888 = CARTESIAN_POINT('',(148.151921,-146.730491,1.51)); +#226889 = LINE('',#226890,#226891); +#226890 = CARTESIAN_POINT('',(148.151921,-146.730491,1.51)); +#226891 = VECTOR('',#226892,1.); +#226892 = DIRECTION('',(0.,0.,1.)); +#226893 = ORIENTED_EDGE('',*,*,#226894,.F.); +#226894 = EDGE_CURVE('',#226855,#226887,#226895,.T.); +#226895 = LINE('',#226896,#226897); +#226896 = CARTESIAN_POINT('',(148.151921,-152.259509,1.51)); +#226897 = VECTOR('',#226898,1.); +#226898 = DIRECTION('',(0.,1.,0.)); +#226899 = PLANE('',#226900); +#226900 = AXIS2_PLACEMENT_3D('',#226901,#226902,#226903); +#226901 = CARTESIAN_POINT('',(148.151921,-152.259509,1.51)); +#226902 = DIRECTION('',(-1.,0.,0.)); +#226903 = DIRECTION('',(0.,1.,0.)); +#226904 = ADVANCED_FACE('',(#226905),#226930,.T.); +#226905 = FACE_BOUND('',#226906,.T.); +#226906 = EDGE_LOOP('',(#226907,#226908,#226916,#226924)); +#226907 = ORIENTED_EDGE('',*,*,#226886,.T.); +#226908 = ORIENTED_EDGE('',*,*,#226909,.T.); +#226909 = EDGE_CURVE('',#226879,#226910,#226912,.T.); +#226910 = VERTEX_POINT('',#226911); +#226911 = CARTESIAN_POINT('',(148.166853,-146.694443,1.545)); +#226912 = LINE('',#226913,#226914); +#226913 = CARTESIAN_POINT('',(148.151921,-146.730491,1.545)); +#226914 = VECTOR('',#226915,1.); +#226915 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#226916 = ORIENTED_EDGE('',*,*,#226917,.F.); +#226917 = EDGE_CURVE('',#226918,#226910,#226920,.T.); +#226918 = VERTEX_POINT('',#226919); +#226919 = CARTESIAN_POINT('',(148.166853,-146.694443,1.51)); +#226920 = LINE('',#226921,#226922); +#226921 = CARTESIAN_POINT('',(148.166853,-146.694443,1.51)); +#226922 = VECTOR('',#226923,1.); +#226923 = DIRECTION('',(0.,0.,1.)); +#226924 = ORIENTED_EDGE('',*,*,#226925,.F.); +#226925 = EDGE_CURVE('',#226887,#226918,#226926,.T.); +#226926 = LINE('',#226927,#226928); +#226927 = CARTESIAN_POINT('',(148.151921,-146.730491,1.51)); +#226928 = VECTOR('',#226929,1.); +#226929 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#226930 = PLANE('',#226931); +#226931 = AXIS2_PLACEMENT_3D('',#226932,#226933,#226934); +#226932 = CARTESIAN_POINT('',(148.151921,-146.730491,1.51)); +#226933 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#226934 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#226935 = ADVANCED_FACE('',(#226936),#226961,.T.); +#226936 = FACE_BOUND('',#226937,.T.); +#226937 = EDGE_LOOP('',(#226938,#226939,#226947,#226955)); +#226938 = ORIENTED_EDGE('',*,*,#226917,.T.); +#226939 = ORIENTED_EDGE('',*,*,#226940,.T.); +#226940 = EDGE_CURVE('',#226910,#226941,#226943,.T.); +#226941 = VERTEX_POINT('',#226942); +#226942 = CARTESIAN_POINT('',(153.1,-141.758578,1.545)); +#226943 = LINE('',#226944,#226945); +#226944 = CARTESIAN_POINT('',(148.166853,-146.694443,1.545)); +#226945 = VECTOR('',#226946,1.); +#226946 = DIRECTION('',(0.706912011861,0.707301496879,0.)); +#226947 = ORIENTED_EDGE('',*,*,#226948,.F.); +#226948 = EDGE_CURVE('',#226949,#226941,#226951,.T.); +#226949 = VERTEX_POINT('',#226950); +#226950 = CARTESIAN_POINT('',(153.1,-141.758578,1.51)); +#226951 = LINE('',#226952,#226953); +#226952 = CARTESIAN_POINT('',(153.1,-141.758578,1.51)); +#226953 = VECTOR('',#226954,1.); +#226954 = DIRECTION('',(0.,0.,1.)); +#226955 = ORIENTED_EDGE('',*,*,#226956,.F.); +#226956 = EDGE_CURVE('',#226918,#226949,#226957,.T.); +#226957 = LINE('',#226958,#226959); +#226958 = CARTESIAN_POINT('',(148.166853,-146.694443,1.51)); +#226959 = VECTOR('',#226960,1.); +#226960 = DIRECTION('',(0.706912011861,0.707301496879,0.)); +#226961 = PLANE('',#226962); +#226962 = AXIS2_PLACEMENT_3D('',#226963,#226964,#226965); +#226963 = CARTESIAN_POINT('',(148.166853,-146.694443,1.51)); +#226964 = DIRECTION('',(-0.707301496879,0.706912011861,0.)); +#226965 = DIRECTION('',(0.706912011861,0.707301496879,0.)); +#226966 = ADVANCED_FACE('',(#226967),#226992,.T.); +#226967 = FACE_BOUND('',#226968,.T.); +#226968 = EDGE_LOOP('',(#226969,#226970,#226978,#226986)); +#226969 = ORIENTED_EDGE('',*,*,#226948,.T.); +#226970 = ORIENTED_EDGE('',*,*,#226971,.T.); +#226971 = EDGE_CURVE('',#226941,#226972,#226974,.T.); +#226972 = VERTEX_POINT('',#226973); +#226973 = CARTESIAN_POINT('',(153.101921,-113.444706,1.545)); +#226974 = LINE('',#226975,#226976); +#226975 = CARTESIAN_POINT('',(153.1,-141.758578,1.545)); +#226976 = VECTOR('',#226977,1.); +#226977 = DIRECTION('',(6.784660167951E-05,0.999999997698,0.)); +#226978 = ORIENTED_EDGE('',*,*,#226979,.F.); +#226979 = EDGE_CURVE('',#226980,#226972,#226982,.T.); +#226980 = VERTEX_POINT('',#226981); +#226981 = CARTESIAN_POINT('',(153.101921,-113.444706,1.51)); +#226982 = LINE('',#226983,#226984); +#226983 = CARTESIAN_POINT('',(153.101921,-113.444706,1.51)); +#226984 = VECTOR('',#226985,1.); +#226985 = DIRECTION('',(0.,0.,1.)); +#226986 = ORIENTED_EDGE('',*,*,#226987,.F.); +#226987 = EDGE_CURVE('',#226949,#226980,#226988,.T.); +#226988 = LINE('',#226989,#226990); +#226989 = CARTESIAN_POINT('',(153.1,-141.758578,1.51)); +#226990 = VECTOR('',#226991,1.); +#226991 = DIRECTION('',(6.784660167951E-05,0.999999997698,0.)); +#226992 = PLANE('',#226993); +#226993 = AXIS2_PLACEMENT_3D('',#226994,#226995,#226996); +#226994 = CARTESIAN_POINT('',(153.1,-141.758578,1.51)); +#226995 = DIRECTION('',(-0.999999997698,6.784660167951E-05,0.)); +#226996 = DIRECTION('',(6.784660167951E-05,0.999999997698,0.)); +#226997 = ADVANCED_FACE('',(#226998),#227023,.T.); +#226998 = FACE_BOUND('',#226999,.T.); +#226999 = EDGE_LOOP('',(#227000,#227001,#227009,#227017)); +#227000 = ORIENTED_EDGE('',*,*,#226979,.T.); +#227001 = ORIENTED_EDGE('',*,*,#227002,.T.); +#227002 = EDGE_CURVE('',#226972,#227003,#227005,.T.); +#227003 = VERTEX_POINT('',#227004); +#227004 = CARTESIAN_POINT('',(153.116853,-113.408658,1.545)); +#227005 = LINE('',#227006,#227007); +#227006 = CARTESIAN_POINT('',(153.101921,-113.444706,1.545)); +#227007 = VECTOR('',#227008,1.); +#227008 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#227009 = ORIENTED_EDGE('',*,*,#227010,.F.); +#227010 = EDGE_CURVE('',#227011,#227003,#227013,.T.); +#227011 = VERTEX_POINT('',#227012); +#227012 = CARTESIAN_POINT('',(153.116853,-113.408658,1.51)); +#227013 = LINE('',#227014,#227015); +#227014 = CARTESIAN_POINT('',(153.116853,-113.408658,1.51)); +#227015 = VECTOR('',#227016,1.); +#227016 = DIRECTION('',(0.,0.,1.)); +#227017 = ORIENTED_EDGE('',*,*,#227018,.F.); +#227018 = EDGE_CURVE('',#226980,#227011,#227019,.T.); +#227019 = LINE('',#227020,#227021); +#227020 = CARTESIAN_POINT('',(153.101921,-113.444706,1.51)); +#227021 = VECTOR('',#227022,1.); +#227022 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#227023 = PLANE('',#227024); +#227024 = AXIS2_PLACEMENT_3D('',#227025,#227026,#227027); +#227025 = CARTESIAN_POINT('',(153.101921,-113.444706,1.51)); +#227026 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#227027 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#227028 = ADVANCED_FACE('',(#227029),#227054,.T.); +#227029 = FACE_BOUND('',#227030,.T.); +#227030 = EDGE_LOOP('',(#227031,#227032,#227040,#227048)); +#227031 = ORIENTED_EDGE('',*,*,#227010,.T.); +#227032 = ORIENTED_EDGE('',*,*,#227033,.T.); +#227033 = EDGE_CURVE('',#227003,#227034,#227036,.T.); +#227034 = VERTEX_POINT('',#227035); +#227035 = CARTESIAN_POINT('',(153.65,-112.872793,1.545)); +#227036 = LINE('',#227037,#227038); +#227037 = CARTESIAN_POINT('',(153.116853,-113.408658,1.545)); +#227038 = VECTOR('',#227039,1.); +#227039 = DIRECTION('',(0.705306658011,0.708902333305,0.)); +#227040 = ORIENTED_EDGE('',*,*,#227041,.F.); +#227041 = EDGE_CURVE('',#227042,#227034,#227044,.T.); +#227042 = VERTEX_POINT('',#227043); +#227043 = CARTESIAN_POINT('',(153.65,-112.872793,1.51)); +#227044 = LINE('',#227045,#227046); +#227045 = CARTESIAN_POINT('',(153.65,-112.872793,1.51)); +#227046 = VECTOR('',#227047,1.); +#227047 = DIRECTION('',(0.,0.,1.)); +#227048 = ORIENTED_EDGE('',*,*,#227049,.F.); +#227049 = EDGE_CURVE('',#227011,#227042,#227050,.T.); +#227050 = LINE('',#227051,#227052); +#227051 = CARTESIAN_POINT('',(153.116853,-113.408658,1.51)); +#227052 = VECTOR('',#227053,1.); +#227053 = DIRECTION('',(0.705306658011,0.708902333305,0.)); +#227054 = PLANE('',#227055); +#227055 = AXIS2_PLACEMENT_3D('',#227056,#227057,#227058); +#227056 = CARTESIAN_POINT('',(153.116853,-113.408658,1.51)); +#227057 = DIRECTION('',(-0.708902333305,0.705306658011,0.)); +#227058 = DIRECTION('',(0.705306658011,0.708902333305,0.)); +#227059 = ADVANCED_FACE('',(#227060),#227085,.T.); +#227060 = FACE_BOUND('',#227061,.T.); +#227061 = EDGE_LOOP('',(#227062,#227063,#227071,#227079)); +#227062 = ORIENTED_EDGE('',*,*,#227041,.T.); +#227063 = ORIENTED_EDGE('',*,*,#227064,.T.); +#227064 = EDGE_CURVE('',#227034,#227065,#227067,.T.); +#227065 = VERTEX_POINT('',#227066); +#227066 = CARTESIAN_POINT('',(153.65,-112.127206,1.545)); +#227067 = LINE('',#227068,#227069); +#227068 = CARTESIAN_POINT('',(153.65,-112.872793,1.545)); +#227069 = VECTOR('',#227070,1.); +#227070 = DIRECTION('',(0.,1.,0.)); +#227071 = ORIENTED_EDGE('',*,*,#227072,.F.); +#227072 = EDGE_CURVE('',#227073,#227065,#227075,.T.); +#227073 = VERTEX_POINT('',#227074); +#227074 = CARTESIAN_POINT('',(153.65,-112.127206,1.51)); +#227075 = LINE('',#227076,#227077); +#227076 = CARTESIAN_POINT('',(153.65,-112.127206,1.51)); +#227077 = VECTOR('',#227078,1.); +#227078 = DIRECTION('',(0.,0.,1.)); +#227079 = ORIENTED_EDGE('',*,*,#227080,.F.); +#227080 = EDGE_CURVE('',#227042,#227073,#227081,.T.); +#227081 = LINE('',#227082,#227083); +#227082 = CARTESIAN_POINT('',(153.65,-112.872793,1.51)); +#227083 = VECTOR('',#227084,1.); +#227084 = DIRECTION('',(0.,1.,0.)); +#227085 = PLANE('',#227086); +#227086 = AXIS2_PLACEMENT_3D('',#227087,#227088,#227089); +#227087 = CARTESIAN_POINT('',(153.65,-112.872793,1.51)); +#227088 = DIRECTION('',(-1.,0.,0.)); +#227089 = DIRECTION('',(0.,1.,0.)); +#227090 = ADVANCED_FACE('',(#227091),#227116,.T.); +#227091 = FACE_BOUND('',#227092,.T.); +#227092 = EDGE_LOOP('',(#227093,#227094,#227102,#227110)); +#227093 = ORIENTED_EDGE('',*,*,#227072,.T.); +#227094 = ORIENTED_EDGE('',*,*,#227095,.T.); +#227095 = EDGE_CURVE('',#227065,#227096,#227098,.T.); +#227096 = VERTEX_POINT('',#227097); +#227097 = CARTESIAN_POINT('',(153.116853,-111.591342,1.545)); +#227098 = LINE('',#227099,#227100); +#227099 = CARTESIAN_POINT('',(153.65,-112.127206,1.545)); +#227100 = VECTOR('',#227101,1.); +#227101 = DIRECTION('',(-0.705307319458,0.708901675212,0.)); +#227102 = ORIENTED_EDGE('',*,*,#227103,.F.); +#227103 = EDGE_CURVE('',#227104,#227096,#227106,.T.); +#227104 = VERTEX_POINT('',#227105); +#227105 = CARTESIAN_POINT('',(153.116853,-111.591342,1.51)); +#227106 = LINE('',#227107,#227108); +#227107 = CARTESIAN_POINT('',(153.116853,-111.591342,1.51)); +#227108 = VECTOR('',#227109,1.); +#227109 = DIRECTION('',(0.,0.,1.)); +#227110 = ORIENTED_EDGE('',*,*,#227111,.F.); +#227111 = EDGE_CURVE('',#227073,#227104,#227112,.T.); +#227112 = LINE('',#227113,#227114); +#227113 = CARTESIAN_POINT('',(153.65,-112.127206,1.51)); +#227114 = VECTOR('',#227115,1.); +#227115 = DIRECTION('',(-0.705307319458,0.708901675212,0.)); +#227116 = PLANE('',#227117); +#227117 = AXIS2_PLACEMENT_3D('',#227118,#227119,#227120); +#227118 = CARTESIAN_POINT('',(153.65,-112.127206,1.51)); +#227119 = DIRECTION('',(-0.708901675212,-0.705307319458,0.)); +#227120 = DIRECTION('',(-0.705307319458,0.708901675212,0.)); +#227121 = ADVANCED_FACE('',(#227122),#227147,.T.); +#227122 = FACE_BOUND('',#227123,.T.); +#227123 = EDGE_LOOP('',(#227124,#227125,#227133,#227141)); +#227124 = ORIENTED_EDGE('',*,*,#227103,.T.); +#227125 = ORIENTED_EDGE('',*,*,#227126,.T.); +#227126 = EDGE_CURVE('',#227096,#227127,#227129,.T.); +#227127 = VERTEX_POINT('',#227128); +#227128 = CARTESIAN_POINT('',(153.101921,-111.555294,1.545)); +#227129 = LINE('',#227130,#227131); +#227130 = CARTESIAN_POINT('',(153.116853,-111.591342,1.545)); +#227131 = VECTOR('',#227132,1.); +#227132 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227133 = ORIENTED_EDGE('',*,*,#227134,.F.); +#227134 = EDGE_CURVE('',#227135,#227127,#227137,.T.); +#227135 = VERTEX_POINT('',#227136); +#227136 = CARTESIAN_POINT('',(153.101921,-111.555294,1.51)); +#227137 = LINE('',#227138,#227139); +#227138 = CARTESIAN_POINT('',(153.101921,-111.555294,1.51)); +#227139 = VECTOR('',#227140,1.); +#227140 = DIRECTION('',(0.,0.,1.)); +#227141 = ORIENTED_EDGE('',*,*,#227142,.F.); +#227142 = EDGE_CURVE('',#227104,#227135,#227143,.T.); +#227143 = LINE('',#227144,#227145); +#227144 = CARTESIAN_POINT('',(153.116853,-111.591342,1.51)); +#227145 = VECTOR('',#227146,1.); +#227146 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227147 = PLANE('',#227148); +#227148 = AXIS2_PLACEMENT_3D('',#227149,#227150,#227151); +#227149 = CARTESIAN_POINT('',(153.116853,-111.591342,1.51)); +#227150 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#227151 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227152 = ADVANCED_FACE('',(#227153),#227178,.T.); +#227153 = FACE_BOUND('',#227154,.T.); +#227154 = EDGE_LOOP('',(#227155,#227156,#227164,#227172)); +#227155 = ORIENTED_EDGE('',*,*,#227134,.T.); +#227156 = ORIENTED_EDGE('',*,*,#227157,.T.); +#227157 = EDGE_CURVE('',#227127,#227158,#227160,.T.); +#227158 = VERTEX_POINT('',#227159); +#227159 = CARTESIAN_POINT('',(153.1,-104.655636,1.545)); +#227160 = LINE('',#227161,#227162); +#227161 = CARTESIAN_POINT('',(153.101921,-111.555294,1.545)); +#227162 = VECTOR('',#227163,1.); +#227163 = DIRECTION('',(-2.784195862396E-04,0.999999961241,0.)); +#227164 = ORIENTED_EDGE('',*,*,#227165,.F.); +#227165 = EDGE_CURVE('',#227166,#227158,#227168,.T.); +#227166 = VERTEX_POINT('',#227167); +#227167 = CARTESIAN_POINT('',(153.1,-104.655636,1.51)); +#227168 = LINE('',#227169,#227170); +#227169 = CARTESIAN_POINT('',(153.1,-104.655636,1.51)); +#227170 = VECTOR('',#227171,1.); +#227171 = DIRECTION('',(0.,0.,1.)); +#227172 = ORIENTED_EDGE('',*,*,#227173,.F.); +#227173 = EDGE_CURVE('',#227135,#227166,#227174,.T.); +#227174 = LINE('',#227175,#227176); +#227175 = CARTESIAN_POINT('',(153.101921,-111.555294,1.51)); +#227176 = VECTOR('',#227177,1.); +#227177 = DIRECTION('',(-2.784195862396E-04,0.999999961241,0.)); +#227178 = PLANE('',#227179); +#227179 = AXIS2_PLACEMENT_3D('',#227180,#227181,#227182); +#227180 = CARTESIAN_POINT('',(153.101921,-111.555294,1.51)); +#227181 = DIRECTION('',(-0.999999961241,-2.784195862396E-04,0.)); +#227182 = DIRECTION('',(-2.784195862396E-04,0.999999961241,0.)); +#227183 = ADVANCED_FACE('',(#227184),#227209,.T.); +#227184 = FACE_BOUND('',#227185,.T.); +#227185 = EDGE_LOOP('',(#227186,#227187,#227195,#227203)); +#227186 = ORIENTED_EDGE('',*,*,#227165,.T.); +#227187 = ORIENTED_EDGE('',*,*,#227188,.T.); +#227188 = EDGE_CURVE('',#227158,#227189,#227191,.T.); +#227189 = VERTEX_POINT('',#227190); +#227190 = CARTESIAN_POINT('',(150.916853,-102.469771,1.545)); +#227191 = LINE('',#227192,#227193); +#227192 = CARTESIAN_POINT('',(153.1,-104.655636,1.545)); +#227193 = VECTOR('',#227194,1.); +#227194 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#227195 = ORIENTED_EDGE('',*,*,#227196,.F.); +#227196 = EDGE_CURVE('',#227197,#227189,#227199,.T.); +#227197 = VERTEX_POINT('',#227198); +#227198 = CARTESIAN_POINT('',(150.916853,-102.469771,1.51)); +#227199 = LINE('',#227200,#227201); +#227200 = CARTESIAN_POINT('',(150.916853,-102.469771,1.51)); +#227201 = VECTOR('',#227202,1.); +#227202 = DIRECTION('',(0.,0.,1.)); +#227203 = ORIENTED_EDGE('',*,*,#227204,.F.); +#227204 = EDGE_CURVE('',#227166,#227197,#227205,.T.); +#227205 = LINE('',#227206,#227207); +#227206 = CARTESIAN_POINT('',(153.1,-104.655636,1.51)); +#227207 = VECTOR('',#227208,1.); +#227208 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#227209 = PLANE('',#227210); +#227210 = AXIS2_PLACEMENT_3D('',#227211,#227212,#227213); +#227211 = CARTESIAN_POINT('',(153.1,-104.655636,1.51)); +#227212 = DIRECTION('',(-0.707546541489,-0.70666674722,0.)); +#227213 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#227214 = ADVANCED_FACE('',(#227215),#227240,.T.); +#227215 = FACE_BOUND('',#227216,.T.); +#227216 = EDGE_LOOP('',(#227217,#227218,#227226,#227234)); +#227217 = ORIENTED_EDGE('',*,*,#227196,.T.); +#227218 = ORIENTED_EDGE('',*,*,#227219,.T.); +#227219 = EDGE_CURVE('',#227189,#227220,#227222,.T.); +#227220 = VERTEX_POINT('',#227221); +#227221 = CARTESIAN_POINT('',(150.901921,-102.433723,1.545)); +#227222 = LINE('',#227223,#227224); +#227223 = CARTESIAN_POINT('',(150.916853,-102.469771,1.545)); +#227224 = VECTOR('',#227225,1.); +#227225 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227226 = ORIENTED_EDGE('',*,*,#227227,.F.); +#227227 = EDGE_CURVE('',#227228,#227220,#227230,.T.); +#227228 = VERTEX_POINT('',#227229); +#227229 = CARTESIAN_POINT('',(150.901921,-102.433723,1.51)); +#227230 = LINE('',#227231,#227232); +#227231 = CARTESIAN_POINT('',(150.901921,-102.433723,1.51)); +#227232 = VECTOR('',#227233,1.); +#227233 = DIRECTION('',(0.,0.,1.)); +#227234 = ORIENTED_EDGE('',*,*,#227235,.F.); +#227235 = EDGE_CURVE('',#227197,#227228,#227236,.T.); +#227236 = LINE('',#227237,#227238); +#227237 = CARTESIAN_POINT('',(150.916853,-102.469771,1.51)); +#227238 = VECTOR('',#227239,1.); +#227239 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227240 = PLANE('',#227241); +#227241 = AXIS2_PLACEMENT_3D('',#227242,#227243,#227244); +#227242 = CARTESIAN_POINT('',(150.916853,-102.469771,1.51)); +#227243 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#227244 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227245 = ADVANCED_FACE('',(#227246),#227271,.T.); +#227246 = FACE_BOUND('',#227247,.T.); +#227247 = EDGE_LOOP('',(#227248,#227249,#227257,#227265)); +#227248 = ORIENTED_EDGE('',*,*,#227227,.T.); +#227249 = ORIENTED_EDGE('',*,*,#227250,.T.); +#227250 = EDGE_CURVE('',#227220,#227251,#227253,.T.); +#227251 = VERTEX_POINT('',#227252); +#227252 = CARTESIAN_POINT('',(150.9,-102.25,1.545)); +#227253 = LINE('',#227254,#227255); +#227254 = CARTESIAN_POINT('',(150.901921,-102.433723,1.545)); +#227255 = VECTOR('',#227256,1.); +#227256 = DIRECTION('',(-1.045538664157E-02,0.999945340951,0.)); +#227257 = ORIENTED_EDGE('',*,*,#227258,.F.); +#227258 = EDGE_CURVE('',#227259,#227251,#227261,.T.); +#227259 = VERTEX_POINT('',#227260); +#227260 = CARTESIAN_POINT('',(150.9,-102.25,1.51)); +#227261 = LINE('',#227262,#227263); +#227262 = CARTESIAN_POINT('',(150.9,-102.25,1.51)); +#227263 = VECTOR('',#227264,1.); +#227264 = DIRECTION('',(0.,0.,1.)); +#227265 = ORIENTED_EDGE('',*,*,#227266,.F.); +#227266 = EDGE_CURVE('',#227228,#227259,#227267,.T.); +#227267 = LINE('',#227268,#227269); +#227268 = CARTESIAN_POINT('',(150.901921,-102.433723,1.51)); +#227269 = VECTOR('',#227270,1.); +#227270 = DIRECTION('',(-1.045538664157E-02,0.999945340951,0.)); +#227271 = PLANE('',#227272); +#227272 = AXIS2_PLACEMENT_3D('',#227273,#227274,#227275); +#227273 = CARTESIAN_POINT('',(150.901921,-102.433723,1.51)); +#227274 = DIRECTION('',(-0.999945340951,-1.045538664157E-02,0.)); +#227275 = DIRECTION('',(-1.045538664157E-02,0.999945340951,0.)); +#227276 = ADVANCED_FACE('',(#227277),#227302,.T.); +#227277 = FACE_BOUND('',#227278,.T.); +#227278 = EDGE_LOOP('',(#227279,#227280,#227288,#227296)); +#227279 = ORIENTED_EDGE('',*,*,#227258,.T.); +#227280 = ORIENTED_EDGE('',*,*,#227281,.T.); +#227281 = EDGE_CURVE('',#227251,#227282,#227284,.T.); +#227282 = VERTEX_POINT('',#227283); +#227283 = CARTESIAN_POINT('',(150.130491,-102.248079,1.545)); +#227284 = LINE('',#227285,#227286); +#227285 = CARTESIAN_POINT('',(150.9,-102.25,1.545)); +#227286 = VECTOR('',#227287,1.); +#227287 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#227288 = ORIENTED_EDGE('',*,*,#227289,.F.); +#227289 = EDGE_CURVE('',#227290,#227282,#227292,.T.); +#227290 = VERTEX_POINT('',#227291); +#227291 = CARTESIAN_POINT('',(150.130491,-102.248079,1.51)); +#227292 = LINE('',#227293,#227294); +#227293 = CARTESIAN_POINT('',(150.130491,-102.248079,1.51)); +#227294 = VECTOR('',#227295,1.); +#227295 = DIRECTION('',(0.,0.,1.)); +#227296 = ORIENTED_EDGE('',*,*,#227297,.F.); +#227297 = EDGE_CURVE('',#227259,#227290,#227298,.T.); +#227298 = LINE('',#227299,#227300); +#227299 = CARTESIAN_POINT('',(150.9,-102.25,1.51)); +#227300 = VECTOR('',#227301,1.); +#227301 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#227302 = PLANE('',#227303); +#227303 = AXIS2_PLACEMENT_3D('',#227304,#227305,#227306); +#227304 = CARTESIAN_POINT('',(150.9,-102.25,1.51)); +#227305 = DIRECTION('',(-2.496389274446E-03,-0.999996884015,0.)); +#227306 = DIRECTION('',(-0.999996884015,2.496389274446E-03,0.)); +#227307 = ADVANCED_FACE('',(#227308),#227333,.T.); +#227308 = FACE_BOUND('',#227309,.T.); +#227309 = EDGE_LOOP('',(#227310,#227311,#227319,#227327)); +#227310 = ORIENTED_EDGE('',*,*,#227289,.T.); +#227311 = ORIENTED_EDGE('',*,*,#227312,.T.); +#227312 = EDGE_CURVE('',#227282,#227313,#227315,.T.); +#227313 = VERTEX_POINT('',#227314); +#227314 = CARTESIAN_POINT('',(150.094443,-102.233147,1.545)); +#227315 = LINE('',#227316,#227317); +#227316 = CARTESIAN_POINT('',(150.130491,-102.248079,1.545)); +#227317 = VECTOR('',#227318,1.); +#227318 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#227319 = ORIENTED_EDGE('',*,*,#227320,.F.); +#227320 = EDGE_CURVE('',#227321,#227313,#227323,.T.); +#227321 = VERTEX_POINT('',#227322); +#227322 = CARTESIAN_POINT('',(150.094443,-102.233147,1.51)); +#227323 = LINE('',#227324,#227325); +#227324 = CARTESIAN_POINT('',(150.094443,-102.233147,1.51)); +#227325 = VECTOR('',#227326,1.); +#227326 = DIRECTION('',(0.,0.,1.)); +#227327 = ORIENTED_EDGE('',*,*,#227328,.F.); +#227328 = EDGE_CURVE('',#227290,#227321,#227329,.T.); +#227329 = LINE('',#227330,#227331); +#227330 = CARTESIAN_POINT('',(150.130491,-102.248079,1.51)); +#227331 = VECTOR('',#227332,1.); +#227332 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#227333 = PLANE('',#227334); +#227334 = AXIS2_PLACEMENT_3D('',#227335,#227336,#227337); +#227335 = CARTESIAN_POINT('',(150.130491,-102.248079,1.51)); +#227336 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#227337 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#227338 = ADVANCED_FACE('',(#227339),#227364,.T.); +#227339 = FACE_BOUND('',#227340,.T.); +#227340 = EDGE_LOOP('',(#227341,#227342,#227350,#227358)); +#227341 = ORIENTED_EDGE('',*,*,#227320,.T.); +#227342 = ORIENTED_EDGE('',*,*,#227343,.T.); +#227343 = EDGE_CURVE('',#227313,#227344,#227346,.T.); +#227344 = VERTEX_POINT('',#227345); +#227345 = CARTESIAN_POINT('',(148.166853,-100.305557,1.545)); +#227346 = LINE('',#227347,#227348); +#227347 = CARTESIAN_POINT('',(150.094443,-102.233147,1.545)); +#227348 = VECTOR('',#227349,1.); +#227349 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#227350 = ORIENTED_EDGE('',*,*,#227351,.F.); +#227351 = EDGE_CURVE('',#227352,#227344,#227354,.T.); +#227352 = VERTEX_POINT('',#227353); +#227353 = CARTESIAN_POINT('',(148.166853,-100.305557,1.51)); +#227354 = LINE('',#227355,#227356); +#227355 = CARTESIAN_POINT('',(148.166853,-100.305557,1.51)); +#227356 = VECTOR('',#227357,1.); +#227357 = DIRECTION('',(0.,0.,1.)); +#227358 = ORIENTED_EDGE('',*,*,#227359,.F.); +#227359 = EDGE_CURVE('',#227321,#227352,#227360,.T.); +#227360 = LINE('',#227361,#227362); +#227361 = CARTESIAN_POINT('',(150.094443,-102.233147,1.51)); +#227362 = VECTOR('',#227363,1.); +#227363 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#227364 = PLANE('',#227365); +#227365 = AXIS2_PLACEMENT_3D('',#227366,#227367,#227368); +#227366 = CARTESIAN_POINT('',(150.094443,-102.233147,1.51)); +#227367 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#227368 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#227369 = ADVANCED_FACE('',(#227370),#227397,.T.); +#227370 = FACE_BOUND('',#227371,.T.); +#227371 = EDGE_LOOP('',(#227372,#227373,#227382,#227390)); +#227372 = ORIENTED_EDGE('',*,*,#227351,.T.); +#227373 = ORIENTED_EDGE('',*,*,#227374,.T.); +#227374 = EDGE_CURVE('',#227344,#227375,#227377,.T.); +#227375 = VERTEX_POINT('',#227376); +#227376 = CARTESIAN_POINT('',(148.166853,-100.194443,1.545)); +#227377 = CIRCLE('',#227378,9.999758414111E-02); +#227378 = AXIS2_PLACEMENT_3D('',#227379,#227380,#227381); +#227379 = CARTESIAN_POINT('',(148.24999707125,-100.25,1.545)); +#227380 = DIRECTION('',(0.,0.,-1.)); +#227381 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#227382 = ORIENTED_EDGE('',*,*,#227383,.F.); +#227383 = EDGE_CURVE('',#227384,#227375,#227386,.T.); +#227384 = VERTEX_POINT('',#227385); +#227385 = CARTESIAN_POINT('',(148.166853,-100.194443,1.51)); +#227386 = LINE('',#227387,#227388); +#227387 = CARTESIAN_POINT('',(148.166853,-100.194443,1.51)); +#227388 = VECTOR('',#227389,1.); +#227389 = DIRECTION('',(0.,0.,1.)); +#227390 = ORIENTED_EDGE('',*,*,#227391,.F.); +#227391 = EDGE_CURVE('',#227352,#227384,#227392,.T.); +#227392 = CIRCLE('',#227393,9.999758414111E-02); +#227393 = AXIS2_PLACEMENT_3D('',#227394,#227395,#227396); +#227394 = CARTESIAN_POINT('',(148.24999707125,-100.25,1.51)); +#227395 = DIRECTION('',(0.,0.,-1.)); +#227396 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#227397 = CYLINDRICAL_SURFACE('',#227398,9.999758414111E-02); +#227398 = AXIS2_PLACEMENT_3D('',#227399,#227400,#227401); +#227399 = CARTESIAN_POINT('',(148.24999707125,-100.25,1.51)); +#227400 = DIRECTION('',(0.,0.,-1.)); +#227401 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#227402 = ADVANCED_FACE('',(#227403),#227428,.T.); +#227403 = FACE_BOUND('',#227404,.T.); +#227404 = EDGE_LOOP('',(#227405,#227406,#227414,#227422)); +#227405 = ORIENTED_EDGE('',*,*,#227383,.T.); +#227406 = ORIENTED_EDGE('',*,*,#227407,.T.); +#227407 = EDGE_CURVE('',#227375,#227408,#227410,.T.); +#227408 = VERTEX_POINT('',#227409); +#227409 = CARTESIAN_POINT('',(148.944442,-99.416853,1.545)); +#227410 = LINE('',#227411,#227412); +#227411 = CARTESIAN_POINT('',(148.166853,-100.194443,1.545)); +#227412 = VECTOR('',#227413,1.); +#227413 = DIRECTION('',(0.707106326508,0.707107235865,0.)); +#227414 = ORIENTED_EDGE('',*,*,#227415,.F.); +#227415 = EDGE_CURVE('',#227416,#227408,#227418,.T.); +#227416 = VERTEX_POINT('',#227417); +#227417 = CARTESIAN_POINT('',(148.944442,-99.416853,1.51)); +#227418 = LINE('',#227419,#227420); +#227419 = CARTESIAN_POINT('',(148.944442,-99.416853,1.51)); +#227420 = VECTOR('',#227421,1.); +#227421 = DIRECTION('',(0.,0.,1.)); +#227422 = ORIENTED_EDGE('',*,*,#227423,.F.); +#227423 = EDGE_CURVE('',#227384,#227416,#227424,.T.); +#227424 = LINE('',#227425,#227426); +#227425 = CARTESIAN_POINT('',(148.166853,-100.194443,1.51)); +#227426 = VECTOR('',#227427,1.); +#227427 = DIRECTION('',(0.707106326508,0.707107235865,0.)); +#227428 = PLANE('',#227429); +#227429 = AXIS2_PLACEMENT_3D('',#227430,#227431,#227432); +#227430 = CARTESIAN_POINT('',(148.166853,-100.194443,1.51)); +#227431 = DIRECTION('',(-0.707107235865,0.707106326508,0.)); +#227432 = DIRECTION('',(0.707106326508,0.707107235865,0.)); +#227433 = ADVANCED_FACE('',(#227434),#227459,.T.); +#227434 = FACE_BOUND('',#227435,.T.); +#227435 = EDGE_LOOP('',(#227436,#227437,#227445,#227453)); +#227436 = ORIENTED_EDGE('',*,*,#227415,.T.); +#227437 = ORIENTED_EDGE('',*,*,#227438,.T.); +#227438 = EDGE_CURVE('',#227408,#227439,#227441,.T.); +#227439 = VERTEX_POINT('',#227440); +#227440 = CARTESIAN_POINT('',(148.980491,-99.401921,1.545)); +#227441 = LINE('',#227442,#227443); +#227442 = CARTESIAN_POINT('',(148.944442,-99.416853,1.545)); +#227443 = VECTOR('',#227444,1.); +#227444 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#227445 = ORIENTED_EDGE('',*,*,#227446,.F.); +#227446 = EDGE_CURVE('',#227447,#227439,#227449,.T.); +#227447 = VERTEX_POINT('',#227448); +#227448 = CARTESIAN_POINT('',(148.980491,-99.401921,1.51)); +#227449 = LINE('',#227450,#227451); +#227450 = CARTESIAN_POINT('',(148.980491,-99.401921,1.51)); +#227451 = VECTOR('',#227452,1.); +#227452 = DIRECTION('',(0.,0.,1.)); +#227453 = ORIENTED_EDGE('',*,*,#227454,.F.); +#227454 = EDGE_CURVE('',#227416,#227447,#227455,.T.); +#227455 = LINE('',#227456,#227457); +#227456 = CARTESIAN_POINT('',(148.944442,-99.416853,1.51)); +#227457 = VECTOR('',#227458,1.); +#227458 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#227459 = PLANE('',#227460); +#227460 = AXIS2_PLACEMENT_3D('',#227461,#227462,#227463); +#227461 = CARTESIAN_POINT('',(148.944442,-99.416853,1.51)); +#227462 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#227463 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#227464 = ADVANCED_FACE('',(#227465),#227490,.T.); +#227465 = FACE_BOUND('',#227466,.T.); +#227466 = EDGE_LOOP('',(#227467,#227468,#227476,#227484)); +#227467 = ORIENTED_EDGE('',*,*,#227446,.T.); +#227468 = ORIENTED_EDGE('',*,*,#227469,.T.); +#227469 = EDGE_CURVE('',#227439,#227470,#227472,.T.); +#227470 = VERTEX_POINT('',#227471); +#227471 = CARTESIAN_POINT('',(150.044364,-99.4,1.545)); +#227472 = LINE('',#227473,#227474); +#227473 = CARTESIAN_POINT('',(148.980491,-99.401921,1.545)); +#227474 = VECTOR('',#227475,1.); +#227475 = DIRECTION('',(0.999998369788,1.805663710197E-03,0.)); +#227476 = ORIENTED_EDGE('',*,*,#227477,.F.); +#227477 = EDGE_CURVE('',#227478,#227470,#227480,.T.); +#227478 = VERTEX_POINT('',#227479); +#227479 = CARTESIAN_POINT('',(150.044364,-99.4,1.51)); +#227480 = LINE('',#227481,#227482); +#227481 = CARTESIAN_POINT('',(150.044364,-99.4,1.51)); +#227482 = VECTOR('',#227483,1.); +#227483 = DIRECTION('',(0.,0.,1.)); +#227484 = ORIENTED_EDGE('',*,*,#227485,.F.); +#227485 = EDGE_CURVE('',#227447,#227478,#227486,.T.); +#227486 = LINE('',#227487,#227488); +#227487 = CARTESIAN_POINT('',(148.980491,-99.401921,1.51)); +#227488 = VECTOR('',#227489,1.); +#227489 = DIRECTION('',(0.999998369788,1.805663710197E-03,0.)); +#227490 = PLANE('',#227491); +#227491 = AXIS2_PLACEMENT_3D('',#227492,#227493,#227494); +#227492 = CARTESIAN_POINT('',(148.980491,-99.401921,1.51)); +#227493 = DIRECTION('',(-1.805663710197E-03,0.999998369788,0.)); +#227494 = DIRECTION('',(0.999998369788,1.805663710197E-03,0.)); +#227495 = ADVANCED_FACE('',(#227496),#227521,.T.); +#227496 = FACE_BOUND('',#227497,.T.); +#227497 = EDGE_LOOP('',(#227498,#227499,#227507,#227515)); +#227498 = ORIENTED_EDGE('',*,*,#227477,.T.); +#227499 = ORIENTED_EDGE('',*,*,#227500,.T.); +#227500 = EDGE_CURVE('',#227470,#227501,#227503,.T.); +#227501 = VERTEX_POINT('',#227502); +#227502 = CARTESIAN_POINT('',(150.630229,-98.816853,1.545)); +#227503 = LINE('',#227504,#227505); +#227504 = CARTESIAN_POINT('',(150.044364,-99.4,1.545)); +#227505 = VECTOR('',#227506,1.); +#227506 = DIRECTION('',(0.708748917263,0.705460822639,0.)); +#227507 = ORIENTED_EDGE('',*,*,#227508,.F.); +#227508 = EDGE_CURVE('',#227509,#227501,#227511,.T.); +#227509 = VERTEX_POINT('',#227510); +#227510 = CARTESIAN_POINT('',(150.630229,-98.816853,1.51)); +#227511 = LINE('',#227512,#227513); +#227512 = CARTESIAN_POINT('',(150.630229,-98.816853,1.51)); +#227513 = VECTOR('',#227514,1.); +#227514 = DIRECTION('',(0.,0.,1.)); +#227515 = ORIENTED_EDGE('',*,*,#227516,.F.); +#227516 = EDGE_CURVE('',#227478,#227509,#227517,.T.); +#227517 = LINE('',#227518,#227519); +#227518 = CARTESIAN_POINT('',(150.044364,-99.4,1.51)); +#227519 = VECTOR('',#227520,1.); +#227520 = DIRECTION('',(0.708748917263,0.705460822639,0.)); +#227521 = PLANE('',#227522); +#227522 = AXIS2_PLACEMENT_3D('',#227523,#227524,#227525); +#227523 = CARTESIAN_POINT('',(150.044364,-99.4,1.51)); +#227524 = DIRECTION('',(-0.705460822639,0.708748917263,0.)); +#227525 = DIRECTION('',(0.708748917263,0.705460822639,0.)); +#227526 = ADVANCED_FACE('',(#227527),#227552,.T.); +#227527 = FACE_BOUND('',#227528,.T.); +#227528 = EDGE_LOOP('',(#227529,#227530,#227538,#227546)); +#227529 = ORIENTED_EDGE('',*,*,#227508,.T.); +#227530 = ORIENTED_EDGE('',*,*,#227531,.T.); +#227531 = EDGE_CURVE('',#227501,#227532,#227534,.T.); +#227532 = VERTEX_POINT('',#227533); +#227533 = CARTESIAN_POINT('',(150.666277,-98.801921,1.545)); +#227534 = LINE('',#227535,#227536); +#227535 = CARTESIAN_POINT('',(150.630229,-98.816853,1.545)); +#227536 = VECTOR('',#227537,1.); +#227537 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#227538 = ORIENTED_EDGE('',*,*,#227539,.F.); +#227539 = EDGE_CURVE('',#227540,#227532,#227542,.T.); +#227540 = VERTEX_POINT('',#227541); +#227541 = CARTESIAN_POINT('',(150.666277,-98.801921,1.51)); +#227542 = LINE('',#227543,#227544); +#227543 = CARTESIAN_POINT('',(150.666277,-98.801921,1.51)); +#227544 = VECTOR('',#227545,1.); +#227545 = DIRECTION('',(0.,0.,1.)); +#227546 = ORIENTED_EDGE('',*,*,#227547,.F.); +#227547 = EDGE_CURVE('',#227509,#227540,#227548,.T.); +#227548 = LINE('',#227549,#227550); +#227549 = CARTESIAN_POINT('',(150.630229,-98.816853,1.51)); +#227550 = VECTOR('',#227551,1.); +#227551 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#227552 = PLANE('',#227553); +#227553 = AXIS2_PLACEMENT_3D('',#227554,#227555,#227556); +#227554 = CARTESIAN_POINT('',(150.630229,-98.816853,1.51)); +#227555 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227556 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#227557 = ADVANCED_FACE('',(#227558),#227583,.T.); +#227558 = FACE_BOUND('',#227559,.T.); +#227559 = EDGE_LOOP('',(#227560,#227561,#227569,#227577)); +#227560 = ORIENTED_EDGE('',*,*,#227539,.T.); +#227561 = ORIENTED_EDGE('',*,*,#227562,.T.); +#227562 = EDGE_CURVE('',#227532,#227563,#227565,.T.); +#227563 = VERTEX_POINT('',#227564); +#227564 = CARTESIAN_POINT('',(150.9,-98.8,1.545)); +#227565 = LINE('',#227566,#227567); +#227566 = CARTESIAN_POINT('',(150.666277,-98.801921,1.545)); +#227567 = VECTOR('',#227568,1.); +#227568 = DIRECTION('',(0.999966224652,8.218853589733E-03,0.)); +#227569 = ORIENTED_EDGE('',*,*,#227570,.F.); +#227570 = EDGE_CURVE('',#227571,#227563,#227573,.T.); +#227571 = VERTEX_POINT('',#227572); +#227572 = CARTESIAN_POINT('',(150.9,-98.8,1.51)); +#227573 = LINE('',#227574,#227575); +#227574 = CARTESIAN_POINT('',(150.9,-98.8,1.51)); +#227575 = VECTOR('',#227576,1.); +#227576 = DIRECTION('',(0.,0.,1.)); +#227577 = ORIENTED_EDGE('',*,*,#227578,.F.); +#227578 = EDGE_CURVE('',#227540,#227571,#227579,.T.); +#227579 = LINE('',#227580,#227581); +#227580 = CARTESIAN_POINT('',(150.666277,-98.801921,1.51)); +#227581 = VECTOR('',#227582,1.); +#227582 = DIRECTION('',(0.999966224652,8.218853589733E-03,0.)); +#227583 = PLANE('',#227584); +#227584 = AXIS2_PLACEMENT_3D('',#227585,#227586,#227587); +#227585 = CARTESIAN_POINT('',(150.666277,-98.801921,1.51)); +#227586 = DIRECTION('',(-8.218853589733E-03,0.999966224652,0.)); +#227587 = DIRECTION('',(0.999966224652,8.218853589733E-03,0.)); +#227588 = ADVANCED_FACE('',(#227589),#227614,.T.); +#227589 = FACE_BOUND('',#227590,.T.); +#227590 = EDGE_LOOP('',(#227591,#227592,#227600,#227608)); +#227591 = ORIENTED_EDGE('',*,*,#227570,.T.); +#227592 = ORIENTED_EDGE('',*,*,#227593,.T.); +#227593 = EDGE_CURVE('',#227563,#227594,#227596,.T.); +#227594 = VERTEX_POINT('',#227595); +#227595 = CARTESIAN_POINT('',(150.9,-93.041422,1.545)); +#227596 = LINE('',#227597,#227598); +#227597 = CARTESIAN_POINT('',(150.9,-98.8,1.545)); +#227598 = VECTOR('',#227599,1.); +#227599 = DIRECTION('',(0.,1.,0.)); +#227600 = ORIENTED_EDGE('',*,*,#227601,.F.); +#227601 = EDGE_CURVE('',#227602,#227594,#227604,.T.); +#227602 = VERTEX_POINT('',#227603); +#227603 = CARTESIAN_POINT('',(150.9,-93.041422,1.51)); +#227604 = LINE('',#227605,#227606); +#227605 = CARTESIAN_POINT('',(150.9,-93.041422,1.51)); +#227606 = VECTOR('',#227607,1.); +#227607 = DIRECTION('',(0.,0.,1.)); +#227608 = ORIENTED_EDGE('',*,*,#227609,.F.); +#227609 = EDGE_CURVE('',#227571,#227602,#227610,.T.); +#227610 = LINE('',#227611,#227612); +#227611 = CARTESIAN_POINT('',(150.9,-98.8,1.51)); +#227612 = VECTOR('',#227613,1.); +#227613 = DIRECTION('',(0.,1.,0.)); +#227614 = PLANE('',#227615); +#227615 = AXIS2_PLACEMENT_3D('',#227616,#227617,#227618); +#227616 = CARTESIAN_POINT('',(150.9,-98.8,1.51)); +#227617 = DIRECTION('',(-1.,0.,0.)); +#227618 = DIRECTION('',(0.,1.,0.)); +#227619 = ADVANCED_FACE('',(#227620),#227645,.T.); +#227620 = FACE_BOUND('',#227621,.T.); +#227621 = EDGE_LOOP('',(#227622,#227623,#227631,#227639)); +#227622 = ORIENTED_EDGE('',*,*,#227601,.T.); +#227623 = ORIENTED_EDGE('',*,*,#227624,.T.); +#227624 = EDGE_CURVE('',#227594,#227625,#227627,.T.); +#227625 = VERTEX_POINT('',#227626); +#227626 = CARTESIAN_POINT('',(149.016853,-91.155557,1.545)); +#227627 = LINE('',#227628,#227629); +#227628 = CARTESIAN_POINT('',(150.9,-93.041422,1.545)); +#227629 = VECTOR('',#227630,1.); +#227630 = DIRECTION('',(-0.706596671715,0.707616522929,0.)); +#227631 = ORIENTED_EDGE('',*,*,#227632,.F.); +#227632 = EDGE_CURVE('',#227633,#227625,#227635,.T.); +#227633 = VERTEX_POINT('',#227634); +#227634 = CARTESIAN_POINT('',(149.016853,-91.155557,1.51)); +#227635 = LINE('',#227636,#227637); +#227636 = CARTESIAN_POINT('',(149.016853,-91.155557,1.51)); +#227637 = VECTOR('',#227638,1.); +#227638 = DIRECTION('',(0.,0.,1.)); +#227639 = ORIENTED_EDGE('',*,*,#227640,.F.); +#227640 = EDGE_CURVE('',#227602,#227633,#227641,.T.); +#227641 = LINE('',#227642,#227643); +#227642 = CARTESIAN_POINT('',(150.9,-93.041422,1.51)); +#227643 = VECTOR('',#227644,1.); +#227644 = DIRECTION('',(-0.706596671715,0.707616522929,0.)); +#227645 = PLANE('',#227646); +#227646 = AXIS2_PLACEMENT_3D('',#227647,#227648,#227649); +#227647 = CARTESIAN_POINT('',(150.9,-93.041422,1.51)); +#227648 = DIRECTION('',(-0.707616522929,-0.706596671715,0.)); +#227649 = DIRECTION('',(-0.706596671715,0.707616522929,0.)); +#227650 = ADVANCED_FACE('',(#227651),#227676,.T.); +#227651 = FACE_BOUND('',#227652,.T.); +#227652 = EDGE_LOOP('',(#227653,#227654,#227662,#227670)); +#227653 = ORIENTED_EDGE('',*,*,#227632,.T.); +#227654 = ORIENTED_EDGE('',*,*,#227655,.T.); +#227655 = EDGE_CURVE('',#227625,#227656,#227658,.T.); +#227656 = VERTEX_POINT('',#227657); +#227657 = CARTESIAN_POINT('',(149.001921,-91.119509,1.545)); +#227658 = LINE('',#227659,#227660); +#227659 = CARTESIAN_POINT('',(149.016853,-91.155557,1.545)); +#227660 = VECTOR('',#227661,1.); +#227661 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227662 = ORIENTED_EDGE('',*,*,#227663,.F.); +#227663 = EDGE_CURVE('',#227664,#227656,#227666,.T.); +#227664 = VERTEX_POINT('',#227665); +#227665 = CARTESIAN_POINT('',(149.001921,-91.119509,1.51)); +#227666 = LINE('',#227667,#227668); +#227667 = CARTESIAN_POINT('',(149.001921,-91.119509,1.51)); +#227668 = VECTOR('',#227669,1.); +#227669 = DIRECTION('',(0.,0.,1.)); +#227670 = ORIENTED_EDGE('',*,*,#227671,.F.); +#227671 = EDGE_CURVE('',#227633,#227664,#227672,.T.); +#227672 = LINE('',#227673,#227674); +#227673 = CARTESIAN_POINT('',(149.016853,-91.155557,1.51)); +#227674 = VECTOR('',#227675,1.); +#227675 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227676 = PLANE('',#227677); +#227677 = AXIS2_PLACEMENT_3D('',#227678,#227679,#227680); +#227678 = CARTESIAN_POINT('',(149.016853,-91.155557,1.51)); +#227679 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#227680 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227681 = ADVANCED_FACE('',(#227682),#227707,.T.); +#227682 = FACE_BOUND('',#227683,.T.); +#227683 = EDGE_LOOP('',(#227684,#227685,#227693,#227701)); +#227684 = ORIENTED_EDGE('',*,*,#227663,.T.); +#227685 = ORIENTED_EDGE('',*,*,#227686,.T.); +#227686 = EDGE_CURVE('',#227656,#227687,#227689,.T.); +#227687 = VERTEX_POINT('',#227688); +#227688 = CARTESIAN_POINT('',(149.,-89.441421,1.545)); +#227689 = LINE('',#227690,#227691); +#227690 = CARTESIAN_POINT('',(149.001921,-91.119509,1.545)); +#227691 = VECTOR('',#227692,1.); +#227692 = DIRECTION('',(-1.144754471345E-03,0.999999344768,0.)); +#227693 = ORIENTED_EDGE('',*,*,#227694,.F.); +#227694 = EDGE_CURVE('',#227695,#227687,#227697,.T.); +#227695 = VERTEX_POINT('',#227696); +#227696 = CARTESIAN_POINT('',(149.,-89.441421,1.51)); +#227697 = LINE('',#227698,#227699); +#227698 = CARTESIAN_POINT('',(149.,-89.441421,1.51)); +#227699 = VECTOR('',#227700,1.); +#227700 = DIRECTION('',(0.,0.,1.)); +#227701 = ORIENTED_EDGE('',*,*,#227702,.F.); +#227702 = EDGE_CURVE('',#227664,#227695,#227703,.T.); +#227703 = LINE('',#227704,#227705); +#227704 = CARTESIAN_POINT('',(149.001921,-91.119509,1.51)); +#227705 = VECTOR('',#227706,1.); +#227706 = DIRECTION('',(-1.144754471345E-03,0.999999344768,0.)); +#227707 = PLANE('',#227708); +#227708 = AXIS2_PLACEMENT_3D('',#227709,#227710,#227711); +#227709 = CARTESIAN_POINT('',(149.001921,-91.119509,1.51)); +#227710 = DIRECTION('',(-0.999999344768,-1.144754471345E-03,0.)); +#227711 = DIRECTION('',(-1.144754471345E-03,0.999999344768,0.)); +#227712 = ADVANCED_FACE('',(#227713),#227738,.T.); +#227713 = FACE_BOUND('',#227714,.T.); +#227714 = EDGE_LOOP('',(#227715,#227716,#227724,#227732)); +#227715 = ORIENTED_EDGE('',*,*,#227694,.T.); +#227716 = ORIENTED_EDGE('',*,*,#227717,.T.); +#227717 = EDGE_CURVE('',#227687,#227718,#227720,.T.); +#227718 = VERTEX_POINT('',#227719); +#227719 = CARTESIAN_POINT('',(147.416853,-87.855557,1.545)); +#227720 = LINE('',#227721,#227722); +#227721 = CARTESIAN_POINT('',(149.,-89.441421,1.545)); +#227722 = VECTOR('',#227723,1.); +#227723 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#227724 = ORIENTED_EDGE('',*,*,#227725,.F.); +#227725 = EDGE_CURVE('',#227726,#227718,#227728,.T.); +#227726 = VERTEX_POINT('',#227727); +#227727 = CARTESIAN_POINT('',(147.416853,-87.855557,1.51)); +#227728 = LINE('',#227729,#227730); +#227729 = CARTESIAN_POINT('',(147.416853,-87.855557,1.51)); +#227730 = VECTOR('',#227731,1.); +#227731 = DIRECTION('',(0.,0.,1.)); +#227732 = ORIENTED_EDGE('',*,*,#227733,.F.); +#227733 = EDGE_CURVE('',#227695,#227726,#227734,.T.); +#227734 = LINE('',#227735,#227736); +#227735 = CARTESIAN_POINT('',(149.,-89.441421,1.51)); +#227736 = VECTOR('',#227737,1.); +#227737 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#227738 = PLANE('',#227739); +#227739 = AXIS2_PLACEMENT_3D('',#227740,#227741,#227742); +#227740 = CARTESIAN_POINT('',(149.,-89.441421,1.51)); +#227741 = DIRECTION('',(-0.707712769878,-0.706500272718,0.)); +#227742 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#227743 = ADVANCED_FACE('',(#227744),#227769,.T.); +#227744 = FACE_BOUND('',#227745,.T.); +#227745 = EDGE_LOOP('',(#227746,#227747,#227755,#227763)); +#227746 = ORIENTED_EDGE('',*,*,#227725,.T.); +#227747 = ORIENTED_EDGE('',*,*,#227748,.T.); +#227748 = EDGE_CURVE('',#227718,#227749,#227751,.T.); +#227749 = VERTEX_POINT('',#227750); +#227750 = CARTESIAN_POINT('',(147.401921,-87.819509,1.545)); +#227751 = LINE('',#227752,#227753); +#227752 = CARTESIAN_POINT('',(147.416853,-87.855557,1.545)); +#227753 = VECTOR('',#227754,1.); +#227754 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227755 = ORIENTED_EDGE('',*,*,#227756,.F.); +#227756 = EDGE_CURVE('',#227757,#227749,#227759,.T.); +#227757 = VERTEX_POINT('',#227758); +#227758 = CARTESIAN_POINT('',(147.401921,-87.819509,1.51)); +#227759 = LINE('',#227760,#227761); +#227760 = CARTESIAN_POINT('',(147.401921,-87.819509,1.51)); +#227761 = VECTOR('',#227762,1.); +#227762 = DIRECTION('',(0.,0.,1.)); +#227763 = ORIENTED_EDGE('',*,*,#227764,.F.); +#227764 = EDGE_CURVE('',#227726,#227757,#227765,.T.); +#227765 = LINE('',#227766,#227767); +#227766 = CARTESIAN_POINT('',(147.416853,-87.855557,1.51)); +#227767 = VECTOR('',#227768,1.); +#227768 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227769 = PLANE('',#227770); +#227770 = AXIS2_PLACEMENT_3D('',#227771,#227772,#227773); +#227771 = CARTESIAN_POINT('',(147.416853,-87.855557,1.51)); +#227772 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#227773 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#227774 = ADVANCED_FACE('',(#227775),#227800,.T.); +#227775 = FACE_BOUND('',#227776,.T.); +#227776 = EDGE_LOOP('',(#227777,#227778,#227786,#227794)); +#227777 = ORIENTED_EDGE('',*,*,#227756,.T.); +#227778 = ORIENTED_EDGE('',*,*,#227779,.T.); +#227779 = EDGE_CURVE('',#227749,#227780,#227782,.T.); +#227780 = VERTEX_POINT('',#227781); +#227781 = CARTESIAN_POINT('',(147.4,-86.78113,1.545)); +#227782 = LINE('',#227783,#227784); +#227783 = CARTESIAN_POINT('',(147.401921,-87.819509,1.545)); +#227784 = VECTOR('',#227785,1.); +#227785 = DIRECTION('',(-1.849995726688E-03,0.999998288756,0.)); +#227786 = ORIENTED_EDGE('',*,*,#227787,.F.); +#227787 = EDGE_CURVE('',#227788,#227780,#227790,.T.); +#227788 = VERTEX_POINT('',#227789); +#227789 = CARTESIAN_POINT('',(147.4,-86.78113,1.51)); +#227790 = LINE('',#227791,#227792); +#227791 = CARTESIAN_POINT('',(147.4,-86.78113,1.51)); +#227792 = VECTOR('',#227793,1.); +#227793 = DIRECTION('',(0.,0.,1.)); +#227794 = ORIENTED_EDGE('',*,*,#227795,.F.); +#227795 = EDGE_CURVE('',#227757,#227788,#227796,.T.); +#227796 = LINE('',#227797,#227798); +#227797 = CARTESIAN_POINT('',(147.401921,-87.819509,1.51)); +#227798 = VECTOR('',#227799,1.); +#227799 = DIRECTION('',(-1.849995726688E-03,0.999998288756,0.)); +#227800 = PLANE('',#227801); +#227801 = AXIS2_PLACEMENT_3D('',#227802,#227803,#227804); +#227802 = CARTESIAN_POINT('',(147.401921,-87.819509,1.51)); +#227803 = DIRECTION('',(-0.999998288756,-1.849995726688E-03,0.)); +#227804 = DIRECTION('',(-1.849995726688E-03,0.999998288756,0.)); +#227805 = ADVANCED_FACE('',(#227806),#227831,.T.); +#227806 = FACE_BOUND('',#227807,.T.); +#227807 = EDGE_LOOP('',(#227808,#227809,#227817,#227825)); +#227808 = ORIENTED_EDGE('',*,*,#227787,.T.); +#227809 = ORIENTED_EDGE('',*,*,#227810,.T.); +#227810 = EDGE_CURVE('',#227780,#227811,#227813,.T.); +#227811 = VERTEX_POINT('',#227812); +#227812 = CARTESIAN_POINT('',(147.385195,-86.777164,1.545)); +#227813 = LINE('',#227814,#227815); +#227814 = CARTESIAN_POINT('',(147.4,-86.78113,1.545)); +#227815 = VECTOR('',#227816,1.); +#227816 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#227817 = ORIENTED_EDGE('',*,*,#227818,.F.); +#227818 = EDGE_CURVE('',#227819,#227811,#227821,.T.); +#227819 = VERTEX_POINT('',#227820); +#227820 = CARTESIAN_POINT('',(147.385195,-86.777164,1.51)); +#227821 = LINE('',#227822,#227823); +#227822 = CARTESIAN_POINT('',(147.385195,-86.777164,1.51)); +#227823 = VECTOR('',#227824,1.); +#227824 = DIRECTION('',(0.,0.,1.)); +#227825 = ORIENTED_EDGE('',*,*,#227826,.F.); +#227826 = EDGE_CURVE('',#227788,#227819,#227827,.T.); +#227827 = LINE('',#227828,#227829); +#227828 = CARTESIAN_POINT('',(147.4,-86.78113,1.51)); +#227829 = VECTOR('',#227830,1.); +#227830 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#227831 = PLANE('',#227832); +#227832 = AXIS2_PLACEMENT_3D('',#227833,#227834,#227835); +#227833 = CARTESIAN_POINT('',(147.4,-86.78113,1.51)); +#227834 = DIRECTION('',(-0.258758913865,-0.9659419364,0.)); +#227835 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#227836 = ADVANCED_FACE('',(#227837),#227864,.T.); +#227837 = FACE_BOUND('',#227838,.T.); +#227838 = EDGE_LOOP('',(#227839,#227840,#227849,#227857)); +#227839 = ORIENTED_EDGE('',*,*,#227818,.T.); +#227840 = ORIENTED_EDGE('',*,*,#227841,.T.); +#227841 = EDGE_CURVE('',#227811,#227842,#227844,.T.); +#227842 = VERTEX_POINT('',#227843); +#227843 = CARTESIAN_POINT('',(147.614805,-86.777164,1.545)); +#227844 = CIRCLE('',#227845,0.299999472923); +#227845 = AXIS2_PLACEMENT_3D('',#227846,#227847,#227848); +#227846 = CARTESIAN_POINT('',(147.5,-86.50000069844,1.545)); +#227847 = DIRECTION('',(0.,0.,-1.)); +#227848 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#227849 = ORIENTED_EDGE('',*,*,#227850,.F.); +#227850 = EDGE_CURVE('',#227851,#227842,#227853,.T.); +#227851 = VERTEX_POINT('',#227852); +#227852 = CARTESIAN_POINT('',(147.614805,-86.777164,1.51)); +#227853 = LINE('',#227854,#227855); +#227854 = CARTESIAN_POINT('',(147.614805,-86.777164,1.51)); +#227855 = VECTOR('',#227856,1.); +#227856 = DIRECTION('',(0.,0.,1.)); +#227857 = ORIENTED_EDGE('',*,*,#227858,.F.); +#227858 = EDGE_CURVE('',#227819,#227851,#227859,.T.); +#227859 = CIRCLE('',#227860,0.299999472923); +#227860 = AXIS2_PLACEMENT_3D('',#227861,#227862,#227863); +#227861 = CARTESIAN_POINT('',(147.5,-86.50000069844,1.51)); +#227862 = DIRECTION('',(0.,0.,-1.)); +#227863 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#227864 = CYLINDRICAL_SURFACE('',#227865,0.299999472923); +#227865 = AXIS2_PLACEMENT_3D('',#227866,#227867,#227868); +#227866 = CARTESIAN_POINT('',(147.5,-86.50000069844,1.51)); +#227867 = DIRECTION('',(0.,0.,-1.)); +#227868 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#227869 = ADVANCED_FACE('',(#227870),#227886,.T.); +#227870 = FACE_BOUND('',#227871,.T.); +#227871 = EDGE_LOOP('',(#227872,#227873,#227879,#227880)); +#227872 = ORIENTED_EDGE('',*,*,#227850,.T.); +#227873 = ORIENTED_EDGE('',*,*,#227874,.T.); +#227874 = EDGE_CURVE('',#227842,#225935,#227875,.T.); +#227875 = LINE('',#227876,#227877); +#227876 = CARTESIAN_POINT('',(147.614805,-86.777164,1.545)); +#227877 = VECTOR('',#227878,1.); +#227878 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#227879 = ORIENTED_EDGE('',*,*,#225932,.F.); +#227880 = ORIENTED_EDGE('',*,*,#227881,.F.); +#227881 = EDGE_CURVE('',#227851,#225933,#227882,.T.); +#227882 = LINE('',#227883,#227884); +#227883 = CARTESIAN_POINT('',(147.614805,-86.777164,1.51)); +#227884 = VECTOR('',#227885,1.); +#227885 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#227886 = PLANE('',#227887); +#227887 = AXIS2_PLACEMENT_3D('',#227888,#227889,#227890); +#227888 = CARTESIAN_POINT('',(147.614805,-86.777164,1.51)); +#227889 = DIRECTION('',(0.258758913865,-0.9659419364,0.)); +#227890 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#227891 = ADVANCED_FACE('',(#227892),#227919,.F.); +#227892 = FACE_BOUND('',#227893,.T.); +#227893 = EDGE_LOOP('',(#227894,#227904,#227911,#227912)); +#227894 = ORIENTED_EDGE('',*,*,#227895,.T.); +#227895 = EDGE_CURVE('',#227896,#227898,#227900,.T.); +#227896 = VERTEX_POINT('',#227897); +#227897 = CARTESIAN_POINT('',(147.637255,-86.5,1.51)); +#227898 = VERTEX_POINT('',#227899); +#227899 = CARTESIAN_POINT('',(147.637255,-86.5,1.545)); +#227900 = LINE('',#227901,#227902); +#227901 = CARTESIAN_POINT('',(147.637255,-86.5,1.51)); +#227902 = VECTOR('',#227903,1.); +#227903 = DIRECTION('',(0.,0.,1.)); +#227904 = ORIENTED_EDGE('',*,*,#227905,.T.); +#227905 = EDGE_CURVE('',#227898,#227898,#227906,.T.); +#227906 = CIRCLE('',#227907,0.137255); +#227907 = AXIS2_PLACEMENT_3D('',#227908,#227909,#227910); +#227908 = CARTESIAN_POINT('',(147.5,-86.5,1.545)); +#227909 = DIRECTION('',(0.,0.,1.)); +#227910 = DIRECTION('',(1.,0.,-0.)); +#227911 = ORIENTED_EDGE('',*,*,#227895,.F.); +#227912 = ORIENTED_EDGE('',*,*,#227913,.F.); +#227913 = EDGE_CURVE('',#227896,#227896,#227914,.T.); +#227914 = CIRCLE('',#227915,0.137255); +#227915 = AXIS2_PLACEMENT_3D('',#227916,#227917,#227918); +#227916 = CARTESIAN_POINT('',(147.5,-86.5,1.51)); +#227917 = DIRECTION('',(0.,0.,1.)); +#227918 = DIRECTION('',(1.,0.,-0.)); +#227919 = CYLINDRICAL_SURFACE('',#227920,0.137255); +#227920 = AXIS2_PLACEMENT_3D('',#227921,#227922,#227923); +#227921 = CARTESIAN_POINT('',(147.5,-86.5,1.51)); +#227922 = DIRECTION('',(-0.,-0.,-1.)); +#227923 = DIRECTION('',(1.,0.,-0.)); +#227924 = ADVANCED_FACE('',(#227925,#227990),#227993,.F.); +#227925 = FACE_BOUND('',#227926,.T.); +#227926 = EDGE_LOOP('',(#227927,#227928,#227929,#227930,#227931,#227932, + #227933,#227934,#227935,#227936,#227937,#227938,#227939,#227940, + #227941,#227942,#227943,#227944,#227945,#227946,#227947,#227948, + #227949,#227950,#227951,#227952,#227953,#227954,#227955,#227956, + #227957,#227958,#227959,#227960,#227961,#227962,#227963,#227964, + #227965,#227966,#227967,#227968,#227969,#227970,#227971,#227972, + #227973,#227974,#227975,#227976,#227977,#227978,#227979,#227980, + #227981,#227982,#227983,#227984,#227985,#227986,#227987,#227988, + #227989)); +#227927 = ORIENTED_EDGE('',*,*,#225958,.T.); +#227928 = ORIENTED_EDGE('',*,*,#225989,.T.); +#227929 = ORIENTED_EDGE('',*,*,#226020,.T.); +#227930 = ORIENTED_EDGE('',*,*,#226051,.T.); +#227931 = ORIENTED_EDGE('',*,*,#226082,.T.); +#227932 = ORIENTED_EDGE('',*,*,#226113,.T.); +#227933 = ORIENTED_EDGE('',*,*,#226144,.T.); +#227934 = ORIENTED_EDGE('',*,*,#226176,.T.); +#227935 = ORIENTED_EDGE('',*,*,#226208,.T.); +#227936 = ORIENTED_EDGE('',*,*,#226239,.T.); +#227937 = ORIENTED_EDGE('',*,*,#226270,.T.); +#227938 = ORIENTED_EDGE('',*,*,#226301,.T.); +#227939 = ORIENTED_EDGE('',*,*,#226332,.T.); +#227940 = ORIENTED_EDGE('',*,*,#226363,.T.); +#227941 = ORIENTED_EDGE('',*,*,#226394,.T.); +#227942 = ORIENTED_EDGE('',*,*,#226426,.T.); +#227943 = ORIENTED_EDGE('',*,*,#226458,.T.); +#227944 = ORIENTED_EDGE('',*,*,#226489,.T.); +#227945 = ORIENTED_EDGE('',*,*,#226520,.T.); +#227946 = ORIENTED_EDGE('',*,*,#226551,.T.); +#227947 = ORIENTED_EDGE('',*,*,#226582,.T.); +#227948 = ORIENTED_EDGE('',*,*,#226613,.T.); +#227949 = ORIENTED_EDGE('',*,*,#226644,.T.); +#227950 = ORIENTED_EDGE('',*,*,#226675,.T.); +#227951 = ORIENTED_EDGE('',*,*,#226706,.T.); +#227952 = ORIENTED_EDGE('',*,*,#226737,.T.); +#227953 = ORIENTED_EDGE('',*,*,#226768,.T.); +#227954 = ORIENTED_EDGE('',*,*,#226799,.T.); +#227955 = ORIENTED_EDGE('',*,*,#226830,.T.); +#227956 = ORIENTED_EDGE('',*,*,#226862,.T.); +#227957 = ORIENTED_EDGE('',*,*,#226894,.T.); +#227958 = ORIENTED_EDGE('',*,*,#226925,.T.); +#227959 = ORIENTED_EDGE('',*,*,#226956,.T.); +#227960 = ORIENTED_EDGE('',*,*,#226987,.T.); +#227961 = ORIENTED_EDGE('',*,*,#227018,.T.); +#227962 = ORIENTED_EDGE('',*,*,#227049,.T.); +#227963 = ORIENTED_EDGE('',*,*,#227080,.T.); +#227964 = ORIENTED_EDGE('',*,*,#227111,.T.); +#227965 = ORIENTED_EDGE('',*,*,#227142,.T.); +#227966 = ORIENTED_EDGE('',*,*,#227173,.T.); +#227967 = ORIENTED_EDGE('',*,*,#227204,.T.); +#227968 = ORIENTED_EDGE('',*,*,#227235,.T.); +#227969 = ORIENTED_EDGE('',*,*,#227266,.T.); +#227970 = ORIENTED_EDGE('',*,*,#227297,.T.); +#227971 = ORIENTED_EDGE('',*,*,#227328,.T.); +#227972 = ORIENTED_EDGE('',*,*,#227359,.T.); +#227973 = ORIENTED_EDGE('',*,*,#227391,.T.); +#227974 = ORIENTED_EDGE('',*,*,#227423,.T.); +#227975 = ORIENTED_EDGE('',*,*,#227454,.T.); +#227976 = ORIENTED_EDGE('',*,*,#227485,.T.); +#227977 = ORIENTED_EDGE('',*,*,#227516,.T.); +#227978 = ORIENTED_EDGE('',*,*,#227547,.T.); +#227979 = ORIENTED_EDGE('',*,*,#227578,.T.); +#227980 = ORIENTED_EDGE('',*,*,#227609,.T.); +#227981 = ORIENTED_EDGE('',*,*,#227640,.T.); +#227982 = ORIENTED_EDGE('',*,*,#227671,.T.); +#227983 = ORIENTED_EDGE('',*,*,#227702,.T.); +#227984 = ORIENTED_EDGE('',*,*,#227733,.T.); +#227985 = ORIENTED_EDGE('',*,*,#227764,.T.); +#227986 = ORIENTED_EDGE('',*,*,#227795,.T.); +#227987 = ORIENTED_EDGE('',*,*,#227826,.T.); +#227988 = ORIENTED_EDGE('',*,*,#227858,.T.); +#227989 = ORIENTED_EDGE('',*,*,#227881,.T.); +#227990 = FACE_BOUND('',#227991,.T.); +#227991 = EDGE_LOOP('',(#227992)); +#227992 = ORIENTED_EDGE('',*,*,#227913,.T.); +#227993 = PLANE('',#227994); +#227994 = AXIS2_PLACEMENT_3D('',#227995,#227996,#227997); +#227995 = CARTESIAN_POINT('',(0.,0.,1.51)); +#227996 = DIRECTION('',(0.,0.,1.)); +#227997 = DIRECTION('',(1.,0.,-0.)); +#227998 = ADVANCED_FACE('',(#227999,#228064),#228067,.T.); +#227999 = FACE_BOUND('',#228000,.F.); +#228000 = EDGE_LOOP('',(#228001,#228002,#228003,#228004,#228005,#228006, + #228007,#228008,#228009,#228010,#228011,#228012,#228013,#228014, + #228015,#228016,#228017,#228018,#228019,#228020,#228021,#228022, + #228023,#228024,#228025,#228026,#228027,#228028,#228029,#228030, + #228031,#228032,#228033,#228034,#228035,#228036,#228037,#228038, + #228039,#228040,#228041,#228042,#228043,#228044,#228045,#228046, + #228047,#228048,#228049,#228050,#228051,#228052,#228053,#228054, + #228055,#228056,#228057,#228058,#228059,#228060,#228061,#228062, + #228063)); +#228001 = ORIENTED_EDGE('',*,*,#225942,.T.); +#228002 = ORIENTED_EDGE('',*,*,#225973,.T.); +#228003 = ORIENTED_EDGE('',*,*,#226004,.T.); +#228004 = ORIENTED_EDGE('',*,*,#226035,.T.); +#228005 = ORIENTED_EDGE('',*,*,#226066,.T.); +#228006 = ORIENTED_EDGE('',*,*,#226097,.T.); +#228007 = ORIENTED_EDGE('',*,*,#226128,.T.); +#228008 = ORIENTED_EDGE('',*,*,#226159,.T.); +#228009 = ORIENTED_EDGE('',*,*,#226192,.T.); +#228010 = ORIENTED_EDGE('',*,*,#226223,.T.); +#228011 = ORIENTED_EDGE('',*,*,#226254,.T.); +#228012 = ORIENTED_EDGE('',*,*,#226285,.T.); +#228013 = ORIENTED_EDGE('',*,*,#226316,.T.); +#228014 = ORIENTED_EDGE('',*,*,#226347,.T.); +#228015 = ORIENTED_EDGE('',*,*,#226378,.T.); +#228016 = ORIENTED_EDGE('',*,*,#226409,.T.); +#228017 = ORIENTED_EDGE('',*,*,#226442,.T.); +#228018 = ORIENTED_EDGE('',*,*,#226473,.T.); +#228019 = ORIENTED_EDGE('',*,*,#226504,.T.); +#228020 = ORIENTED_EDGE('',*,*,#226535,.T.); +#228021 = ORIENTED_EDGE('',*,*,#226566,.T.); +#228022 = ORIENTED_EDGE('',*,*,#226597,.T.); +#228023 = ORIENTED_EDGE('',*,*,#226628,.T.); +#228024 = ORIENTED_EDGE('',*,*,#226659,.T.); +#228025 = ORIENTED_EDGE('',*,*,#226690,.T.); +#228026 = ORIENTED_EDGE('',*,*,#226721,.T.); +#228027 = ORIENTED_EDGE('',*,*,#226752,.T.); +#228028 = ORIENTED_EDGE('',*,*,#226783,.T.); +#228029 = ORIENTED_EDGE('',*,*,#226814,.T.); +#228030 = ORIENTED_EDGE('',*,*,#226845,.T.); +#228031 = ORIENTED_EDGE('',*,*,#226878,.T.); +#228032 = ORIENTED_EDGE('',*,*,#226909,.T.); +#228033 = ORIENTED_EDGE('',*,*,#226940,.T.); +#228034 = ORIENTED_EDGE('',*,*,#226971,.T.); +#228035 = ORIENTED_EDGE('',*,*,#227002,.T.); +#228036 = ORIENTED_EDGE('',*,*,#227033,.T.); +#228037 = ORIENTED_EDGE('',*,*,#227064,.T.); +#228038 = ORIENTED_EDGE('',*,*,#227095,.T.); +#228039 = ORIENTED_EDGE('',*,*,#227126,.T.); +#228040 = ORIENTED_EDGE('',*,*,#227157,.T.); +#228041 = ORIENTED_EDGE('',*,*,#227188,.T.); +#228042 = ORIENTED_EDGE('',*,*,#227219,.T.); +#228043 = ORIENTED_EDGE('',*,*,#227250,.T.); +#228044 = ORIENTED_EDGE('',*,*,#227281,.T.); +#228045 = ORIENTED_EDGE('',*,*,#227312,.T.); +#228046 = ORIENTED_EDGE('',*,*,#227343,.T.); +#228047 = ORIENTED_EDGE('',*,*,#227374,.T.); +#228048 = ORIENTED_EDGE('',*,*,#227407,.T.); +#228049 = ORIENTED_EDGE('',*,*,#227438,.T.); +#228050 = ORIENTED_EDGE('',*,*,#227469,.T.); +#228051 = ORIENTED_EDGE('',*,*,#227500,.T.); +#228052 = ORIENTED_EDGE('',*,*,#227531,.T.); +#228053 = ORIENTED_EDGE('',*,*,#227562,.T.); +#228054 = ORIENTED_EDGE('',*,*,#227593,.T.); +#228055 = ORIENTED_EDGE('',*,*,#227624,.T.); +#228056 = ORIENTED_EDGE('',*,*,#227655,.T.); +#228057 = ORIENTED_EDGE('',*,*,#227686,.T.); +#228058 = ORIENTED_EDGE('',*,*,#227717,.T.); +#228059 = ORIENTED_EDGE('',*,*,#227748,.T.); +#228060 = ORIENTED_EDGE('',*,*,#227779,.T.); +#228061 = ORIENTED_EDGE('',*,*,#227810,.T.); +#228062 = ORIENTED_EDGE('',*,*,#227841,.T.); +#228063 = ORIENTED_EDGE('',*,*,#227874,.T.); +#228064 = FACE_BOUND('',#228065,.F.); +#228065 = EDGE_LOOP('',(#228066)); +#228066 = ORIENTED_EDGE('',*,*,#227905,.T.); +#228067 = PLANE('',#228068); +#228068 = AXIS2_PLACEMENT_3D('',#228069,#228070,#228071); +#228069 = CARTESIAN_POINT('',(0.,0.,1.545)); +#228070 = DIRECTION('',(0.,0.,1.)); +#228071 = DIRECTION('',(1.,0.,-0.)); +#228072 = MANIFOLD_SOLID_BREP('',#228073); +#228073 = CLOSED_SHELL('',(#228074,#228116,#228147,#228178,#228209, + #228240,#228271,#228302,#228333,#228364,#228397,#228428,#228459, + #228490,#228521,#228552,#228583,#228614,#228636,#228669,#228698)); +#228074 = ADVANCED_FACE('',(#228075),#228111,.T.); +#228075 = FACE_BOUND('',#228076,.T.); +#228076 = EDGE_LOOP('',(#228077,#228087,#228096,#228104)); +#228077 = ORIENTED_EDGE('',*,*,#228078,.T.); +#228078 = EDGE_CURVE('',#228079,#228081,#228083,.T.); +#228079 = VERTEX_POINT('',#228080); +#228080 = CARTESIAN_POINT('',(146.730491,-68.558079,1.51)); +#228081 = VERTEX_POINT('',#228082); +#228082 = CARTESIAN_POINT('',(146.730491,-68.558079,1.545)); +#228083 = LINE('',#228084,#228085); +#228084 = CARTESIAN_POINT('',(146.730491,-68.558079,1.51)); +#228085 = VECTOR('',#228086,1.); +#228086 = DIRECTION('',(0.,0.,1.)); +#228087 = ORIENTED_EDGE('',*,*,#228088,.T.); +#228088 = EDGE_CURVE('',#228081,#228089,#228091,.T.); +#228089 = VERTEX_POINT('',#228090); +#228090 = CARTESIAN_POINT('',(146.730491,-68.361921,1.545)); +#228091 = CIRCLE('',#228092,0.100000456609); +#228092 = AXIS2_PLACEMENT_3D('',#228093,#228094,#228095); +#228093 = CARTESIAN_POINT('',(146.75,-68.46,1.545)); +#228094 = DIRECTION('',(0.,0.,-1.)); +#228095 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#228096 = ORIENTED_EDGE('',*,*,#228097,.F.); +#228097 = EDGE_CURVE('',#228098,#228089,#228100,.T.); +#228098 = VERTEX_POINT('',#228099); +#228099 = CARTESIAN_POINT('',(146.730491,-68.361921,1.51)); +#228100 = LINE('',#228101,#228102); +#228101 = CARTESIAN_POINT('',(146.730491,-68.361921,1.51)); +#228102 = VECTOR('',#228103,1.); +#228103 = DIRECTION('',(0.,0.,1.)); +#228104 = ORIENTED_EDGE('',*,*,#228105,.F.); +#228105 = EDGE_CURVE('',#228079,#228098,#228106,.T.); +#228106 = CIRCLE('',#228107,0.100000456609); +#228107 = AXIS2_PLACEMENT_3D('',#228108,#228109,#228110); +#228108 = CARTESIAN_POINT('',(146.75,-68.46,1.51)); +#228109 = DIRECTION('',(0.,0.,-1.)); +#228110 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#228111 = CYLINDRICAL_SURFACE('',#228112,0.100000456609); +#228112 = AXIS2_PLACEMENT_3D('',#228113,#228114,#228115); +#228113 = CARTESIAN_POINT('',(146.75,-68.46,1.51)); +#228114 = DIRECTION('',(0.,0.,-1.)); +#228115 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#228116 = ADVANCED_FACE('',(#228117),#228142,.T.); +#228117 = FACE_BOUND('',#228118,.T.); +#228118 = EDGE_LOOP('',(#228119,#228120,#228128,#228136)); +#228119 = ORIENTED_EDGE('',*,*,#228097,.T.); +#228120 = ORIENTED_EDGE('',*,*,#228121,.T.); +#228121 = EDGE_CURVE('',#228089,#228122,#228124,.T.); +#228122 = VERTEX_POINT('',#228123); +#228123 = CARTESIAN_POINT('',(147.719509,-68.361921,1.545)); +#228124 = LINE('',#228125,#228126); +#228125 = CARTESIAN_POINT('',(146.730491,-68.361921,1.545)); +#228126 = VECTOR('',#228127,1.); +#228127 = DIRECTION('',(1.,0.,0.)); +#228128 = ORIENTED_EDGE('',*,*,#228129,.F.); +#228129 = EDGE_CURVE('',#228130,#228122,#228132,.T.); +#228130 = VERTEX_POINT('',#228131); +#228131 = CARTESIAN_POINT('',(147.719509,-68.361921,1.51)); +#228132 = LINE('',#228133,#228134); +#228133 = CARTESIAN_POINT('',(147.719509,-68.361921,1.51)); +#228134 = VECTOR('',#228135,1.); +#228135 = DIRECTION('',(0.,0.,1.)); +#228136 = ORIENTED_EDGE('',*,*,#228137,.F.); +#228137 = EDGE_CURVE('',#228098,#228130,#228138,.T.); +#228138 = LINE('',#228139,#228140); +#228139 = CARTESIAN_POINT('',(146.730491,-68.361921,1.51)); +#228140 = VECTOR('',#228141,1.); +#228141 = DIRECTION('',(1.,0.,0.)); +#228142 = PLANE('',#228143); +#228143 = AXIS2_PLACEMENT_3D('',#228144,#228145,#228146); +#228144 = CARTESIAN_POINT('',(146.730491,-68.361921,1.51)); +#228145 = DIRECTION('',(0.,1.,0.)); +#228146 = DIRECTION('',(1.,0.,0.)); +#228147 = ADVANCED_FACE('',(#228148),#228173,.T.); +#228148 = FACE_BOUND('',#228149,.T.); +#228149 = EDGE_LOOP('',(#228150,#228151,#228159,#228167)); +#228150 = ORIENTED_EDGE('',*,*,#228129,.T.); +#228151 = ORIENTED_EDGE('',*,*,#228152,.T.); +#228152 = EDGE_CURVE('',#228122,#228153,#228155,.T.); +#228153 = VERTEX_POINT('',#228154); +#228154 = CARTESIAN_POINT('',(147.755557,-68.376853,1.545)); +#228155 = LINE('',#228156,#228157); +#228156 = CARTESIAN_POINT('',(147.719509,-68.361921,1.545)); +#228157 = VECTOR('',#228158,1.); +#228158 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#228159 = ORIENTED_EDGE('',*,*,#228160,.F.); +#228160 = EDGE_CURVE('',#228161,#228153,#228163,.T.); +#228161 = VERTEX_POINT('',#228162); +#228162 = CARTESIAN_POINT('',(147.755557,-68.376853,1.51)); +#228163 = LINE('',#228164,#228165); +#228164 = CARTESIAN_POINT('',(147.755557,-68.376853,1.51)); +#228165 = VECTOR('',#228166,1.); +#228166 = DIRECTION('',(0.,0.,1.)); +#228167 = ORIENTED_EDGE('',*,*,#228168,.F.); +#228168 = EDGE_CURVE('',#228130,#228161,#228169,.T.); +#228169 = LINE('',#228170,#228171); +#228170 = CARTESIAN_POINT('',(147.719509,-68.361921,1.51)); +#228171 = VECTOR('',#228172,1.); +#228172 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#228173 = PLANE('',#228174); +#228174 = AXIS2_PLACEMENT_3D('',#228175,#228176,#228177); +#228175 = CARTESIAN_POINT('',(147.719509,-68.361921,1.51)); +#228176 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#228177 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#228178 = ADVANCED_FACE('',(#228179),#228204,.T.); +#228179 = FACE_BOUND('',#228180,.T.); +#228180 = EDGE_LOOP('',(#228181,#228182,#228190,#228198)); +#228181 = ORIENTED_EDGE('',*,*,#228160,.T.); +#228182 = ORIENTED_EDGE('',*,*,#228183,.T.); +#228183 = EDGE_CURVE('',#228153,#228184,#228186,.T.); +#228184 = VERTEX_POINT('',#228185); +#228185 = CARTESIAN_POINT('',(147.854685,-68.473264,1.545)); +#228186 = LINE('',#228187,#228188); +#228187 = CARTESIAN_POINT('',(147.755557,-68.376853,1.545)); +#228188 = VECTOR('',#228189,1.); +#228189 = DIRECTION('',(0.716862779178,-0.697214282577,0.)); +#228190 = ORIENTED_EDGE('',*,*,#228191,.F.); +#228191 = EDGE_CURVE('',#228192,#228184,#228194,.T.); +#228192 = VERTEX_POINT('',#228193); +#228193 = CARTESIAN_POINT('',(147.854685,-68.473264,1.51)); +#228194 = LINE('',#228195,#228196); +#228195 = CARTESIAN_POINT('',(147.854685,-68.473264,1.51)); +#228196 = VECTOR('',#228197,1.); +#228197 = DIRECTION('',(0.,0.,1.)); +#228198 = ORIENTED_EDGE('',*,*,#228199,.F.); +#228199 = EDGE_CURVE('',#228161,#228192,#228200,.T.); +#228200 = LINE('',#228201,#228202); +#228201 = CARTESIAN_POINT('',(147.755557,-68.376853,1.51)); +#228202 = VECTOR('',#228203,1.); +#228203 = DIRECTION('',(0.716862779178,-0.697214282577,0.)); +#228204 = PLANE('',#228205); +#228205 = AXIS2_PLACEMENT_3D('',#228206,#228207,#228208); +#228206 = CARTESIAN_POINT('',(147.755557,-68.376853,1.51)); +#228207 = DIRECTION('',(0.697214282577,0.716862779178,-0.)); +#228208 = DIRECTION('',(0.716862779178,-0.697214282577,0.)); +#228209 = ADVANCED_FACE('',(#228210),#228235,.T.); +#228210 = FACE_BOUND('',#228211,.T.); +#228211 = EDGE_LOOP('',(#228212,#228213,#228221,#228229)); +#228212 = ORIENTED_EDGE('',*,*,#228191,.T.); +#228213 = ORIENTED_EDGE('',*,*,#228214,.T.); +#228214 = EDGE_CURVE('',#228184,#228215,#228217,.T.); +#228215 = VERTEX_POINT('',#228216); +#228216 = CARTESIAN_POINT('',(147.878503,-68.489289,1.545)); +#228217 = LINE('',#228218,#228219); +#228218 = CARTESIAN_POINT('',(147.854685,-68.473264,1.545)); +#228219 = VECTOR('',#228220,1.); +#228220 = DIRECTION('',(0.829690136176,-0.558224218332,0.)); +#228221 = ORIENTED_EDGE('',*,*,#228222,.F.); +#228222 = EDGE_CURVE('',#228223,#228215,#228225,.T.); +#228223 = VERTEX_POINT('',#228224); +#228224 = CARTESIAN_POINT('',(147.878503,-68.489289,1.51)); +#228225 = LINE('',#228226,#228227); +#228226 = CARTESIAN_POINT('',(147.878503,-68.489289,1.51)); +#228227 = VECTOR('',#228228,1.); +#228228 = DIRECTION('',(0.,0.,1.)); +#228229 = ORIENTED_EDGE('',*,*,#228230,.F.); +#228230 = EDGE_CURVE('',#228192,#228223,#228231,.T.); +#228231 = LINE('',#228232,#228233); +#228232 = CARTESIAN_POINT('',(147.854685,-68.473264,1.51)); +#228233 = VECTOR('',#228234,1.); +#228234 = DIRECTION('',(0.829690136176,-0.558224218332,0.)); +#228235 = PLANE('',#228236); +#228236 = AXIS2_PLACEMENT_3D('',#228237,#228238,#228239); +#228237 = CARTESIAN_POINT('',(147.854685,-68.473264,1.51)); +#228238 = DIRECTION('',(0.558224218332,0.829690136176,-0.)); +#228239 = DIRECTION('',(0.829690136176,-0.558224218332,0.)); +#228240 = ADVANCED_FACE('',(#228241),#228266,.T.); +#228241 = FACE_BOUND('',#228242,.T.); +#228242 = EDGE_LOOP('',(#228243,#228244,#228252,#228260)); +#228243 = ORIENTED_EDGE('',*,*,#228222,.T.); +#228244 = ORIENTED_EDGE('',*,*,#228245,.T.); +#228245 = EDGE_CURVE('',#228215,#228246,#228248,.T.); +#228246 = VERTEX_POINT('',#228247); +#228247 = CARTESIAN_POINT('',(148.083147,-68.696651,1.545)); +#228248 = LINE('',#228249,#228250); +#228249 = CARTESIAN_POINT('',(147.878503,-68.489289,1.545)); +#228250 = VECTOR('',#228251,1.); +#228251 = DIRECTION('',(0.702426719156,-0.711756070726,0.)); +#228252 = ORIENTED_EDGE('',*,*,#228253,.F.); +#228253 = EDGE_CURVE('',#228254,#228246,#228256,.T.); +#228254 = VERTEX_POINT('',#228255); +#228255 = CARTESIAN_POINT('',(148.083147,-68.696651,1.51)); +#228256 = LINE('',#228257,#228258); +#228257 = CARTESIAN_POINT('',(148.083147,-68.696651,1.51)); +#228258 = VECTOR('',#228259,1.); +#228259 = DIRECTION('',(0.,0.,1.)); +#228260 = ORIENTED_EDGE('',*,*,#228261,.F.); +#228261 = EDGE_CURVE('',#228223,#228254,#228262,.T.); +#228262 = LINE('',#228263,#228264); +#228263 = CARTESIAN_POINT('',(147.878503,-68.489289,1.51)); +#228264 = VECTOR('',#228265,1.); +#228265 = DIRECTION('',(0.702426719156,-0.711756070726,0.)); +#228266 = PLANE('',#228267); +#228267 = AXIS2_PLACEMENT_3D('',#228268,#228269,#228270); +#228268 = CARTESIAN_POINT('',(147.878503,-68.489289,1.51)); +#228269 = DIRECTION('',(0.711756070726,0.702426719156,-0.)); +#228270 = DIRECTION('',(0.702426719156,-0.711756070726,0.)); +#228271 = ADVANCED_FACE('',(#228272),#228297,.T.); +#228272 = FACE_BOUND('',#228273,.T.); +#228273 = EDGE_LOOP('',(#228274,#228275,#228283,#228291)); +#228274 = ORIENTED_EDGE('',*,*,#228253,.T.); +#228275 = ORIENTED_EDGE('',*,*,#228276,.T.); +#228276 = EDGE_CURVE('',#228246,#228277,#228279,.T.); +#228277 = VERTEX_POINT('',#228278); +#228278 = CARTESIAN_POINT('',(148.098079,-68.732699,1.545)); +#228279 = LINE('',#228280,#228281); +#228280 = CARTESIAN_POINT('',(148.083147,-68.696651,1.545)); +#228281 = VECTOR('',#228282,1.); +#228282 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#228283 = ORIENTED_EDGE('',*,*,#228284,.F.); +#228284 = EDGE_CURVE('',#228285,#228277,#228287,.T.); +#228285 = VERTEX_POINT('',#228286); +#228286 = CARTESIAN_POINT('',(148.098079,-68.732699,1.51)); +#228287 = LINE('',#228288,#228289); +#228288 = CARTESIAN_POINT('',(148.098079,-68.732699,1.51)); +#228289 = VECTOR('',#228290,1.); +#228290 = DIRECTION('',(0.,0.,1.)); +#228291 = ORIENTED_EDGE('',*,*,#228292,.F.); +#228292 = EDGE_CURVE('',#228254,#228285,#228293,.T.); +#228293 = LINE('',#228294,#228295); +#228294 = CARTESIAN_POINT('',(148.083147,-68.696651,1.51)); +#228295 = VECTOR('',#228296,1.); +#228296 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#228297 = PLANE('',#228298); +#228298 = AXIS2_PLACEMENT_3D('',#228299,#228300,#228301); +#228299 = CARTESIAN_POINT('',(148.083147,-68.696651,1.51)); +#228300 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#228301 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#228302 = ADVANCED_FACE('',(#228303),#228328,.T.); +#228303 = FACE_BOUND('',#228304,.T.); +#228304 = EDGE_LOOP('',(#228305,#228306,#228314,#228322)); +#228305 = ORIENTED_EDGE('',*,*,#228284,.T.); +#228306 = ORIENTED_EDGE('',*,*,#228307,.T.); +#228307 = EDGE_CURVE('',#228277,#228308,#228310,.T.); +#228308 = VERTEX_POINT('',#228309); +#228309 = CARTESIAN_POINT('',(148.1,-73.458578,1.545)); +#228310 = LINE('',#228311,#228312); +#228311 = CARTESIAN_POINT('',(148.098079,-68.732699,1.545)); +#228312 = VECTOR('',#228313,1.); +#228313 = DIRECTION('',(4.064851938185E-04,-0.999999917385,0.)); +#228314 = ORIENTED_EDGE('',*,*,#228315,.F.); +#228315 = EDGE_CURVE('',#228316,#228308,#228318,.T.); +#228316 = VERTEX_POINT('',#228317); +#228317 = CARTESIAN_POINT('',(148.1,-73.458578,1.51)); +#228318 = LINE('',#228319,#228320); +#228319 = CARTESIAN_POINT('',(148.1,-73.458578,1.51)); +#228320 = VECTOR('',#228321,1.); +#228321 = DIRECTION('',(0.,0.,1.)); +#228322 = ORIENTED_EDGE('',*,*,#228323,.F.); +#228323 = EDGE_CURVE('',#228285,#228316,#228324,.T.); +#228324 = LINE('',#228325,#228326); +#228325 = CARTESIAN_POINT('',(148.098079,-68.732699,1.51)); +#228326 = VECTOR('',#228327,1.); +#228327 = DIRECTION('',(4.064851938185E-04,-0.999999917385,0.)); +#228328 = PLANE('',#228329); +#228329 = AXIS2_PLACEMENT_3D('',#228330,#228331,#228332); +#228330 = CARTESIAN_POINT('',(148.098079,-68.732699,1.51)); +#228331 = DIRECTION('',(0.999999917385,4.064851938185E-04,-0.)); +#228332 = DIRECTION('',(4.064851938185E-04,-0.999999917385,0.)); +#228333 = ADVANCED_FACE('',(#228334),#228359,.T.); +#228334 = FACE_BOUND('',#228335,.T.); +#228335 = EDGE_LOOP('',(#228336,#228337,#228345,#228353)); +#228336 = ORIENTED_EDGE('',*,*,#228315,.T.); +#228337 = ORIENTED_EDGE('',*,*,#228338,.T.); +#228338 = EDGE_CURVE('',#228308,#228339,#228341,.T.); +#228339 = VERTEX_POINT('',#228340); +#228340 = CARTESIAN_POINT('',(148.361637,-73.717729,1.545)); +#228341 = LINE('',#228342,#228343); +#228342 = CARTESIAN_POINT('',(148.1,-73.458578,1.545)); +#228343 = VECTOR('',#228344,1.); +#228344 = DIRECTION('',(0.710474085888,-0.703723364172,0.)); +#228345 = ORIENTED_EDGE('',*,*,#228346,.F.); +#228346 = EDGE_CURVE('',#228347,#228339,#228349,.T.); +#228347 = VERTEX_POINT('',#228348); +#228348 = CARTESIAN_POINT('',(148.361637,-73.717729,1.51)); +#228349 = LINE('',#228350,#228351); +#228350 = CARTESIAN_POINT('',(148.361637,-73.717729,1.51)); +#228351 = VECTOR('',#228352,1.); +#228352 = DIRECTION('',(0.,0.,1.)); +#228353 = ORIENTED_EDGE('',*,*,#228354,.F.); +#228354 = EDGE_CURVE('',#228316,#228347,#228355,.T.); +#228355 = LINE('',#228356,#228357); +#228356 = CARTESIAN_POINT('',(148.1,-73.458578,1.51)); +#228357 = VECTOR('',#228358,1.); +#228358 = DIRECTION('',(0.710474085888,-0.703723364172,0.)); +#228359 = PLANE('',#228360); +#228360 = AXIS2_PLACEMENT_3D('',#228361,#228362,#228363); +#228361 = CARTESIAN_POINT('',(148.1,-73.458578,1.51)); +#228362 = DIRECTION('',(0.703723364172,0.710474085888,-0.)); +#228363 = DIRECTION('',(0.710474085888,-0.703723364172,0.)); +#228364 = ADVANCED_FACE('',(#228365),#228392,.T.); +#228365 = FACE_BOUND('',#228366,.T.); +#228366 = EDGE_LOOP('',(#228367,#228368,#228377,#228385)); +#228367 = ORIENTED_EDGE('',*,*,#228346,.T.); +#228368 = ORIENTED_EDGE('',*,*,#228369,.T.); +#228369 = EDGE_CURVE('',#228339,#228370,#228372,.T.); +#228370 = VERTEX_POINT('',#228371); +#228371 = CARTESIAN_POINT('',(148.246832,-73.916577,1.545)); +#228372 = CIRCLE('',#228373,0.299999861965); +#228373 = AXIS2_PLACEMENT_3D('',#228374,#228375,#228376); +#228374 = CARTESIAN_POINT('',(148.5442653112,-73.95573491825,1.545)); +#228375 = DIRECTION('',(-0.,0.,-1.)); +#228376 = DIRECTION('',(-0.608761317466,0.793353425881,0.)); +#228377 = ORIENTED_EDGE('',*,*,#228378,.F.); +#228378 = EDGE_CURVE('',#228379,#228370,#228381,.T.); +#228379 = VERTEX_POINT('',#228380); +#228380 = CARTESIAN_POINT('',(148.246832,-73.916577,1.51)); +#228381 = LINE('',#228382,#228383); +#228382 = CARTESIAN_POINT('',(148.246832,-73.916577,1.51)); +#228383 = VECTOR('',#228384,1.); +#228384 = DIRECTION('',(0.,0.,1.)); +#228385 = ORIENTED_EDGE('',*,*,#228386,.F.); +#228386 = EDGE_CURVE('',#228347,#228379,#228387,.T.); +#228387 = CIRCLE('',#228388,0.299999861965); +#228388 = AXIS2_PLACEMENT_3D('',#228389,#228390,#228391); +#228389 = CARTESIAN_POINT('',(148.5442653112,-73.95573491825,1.51)); +#228390 = DIRECTION('',(-0.,0.,-1.)); +#228391 = DIRECTION('',(-0.608761317466,0.793353425881,0.)); +#228392 = CYLINDRICAL_SURFACE('',#228393,0.299999861965); +#228393 = AXIS2_PLACEMENT_3D('',#228394,#228395,#228396); +#228394 = CARTESIAN_POINT('',(148.5442653112,-73.95573491825,1.51)); +#228395 = DIRECTION('',(-0.,0.,-1.)); +#228396 = DIRECTION('',(-0.608761317466,0.793353425881,0.)); +#228397 = ADVANCED_FACE('',(#228398),#228423,.T.); +#228398 = FACE_BOUND('',#228399,.T.); +#228399 = EDGE_LOOP('',(#228400,#228401,#228409,#228417)); +#228400 = ORIENTED_EDGE('',*,*,#228378,.T.); +#228401 = ORIENTED_EDGE('',*,*,#228402,.T.); +#228402 = EDGE_CURVE('',#228370,#228403,#228405,.T.); +#228403 = VERTEX_POINT('',#228404); +#228404 = CARTESIAN_POINT('',(148.252817,-73.894238,1.545)); +#228405 = LINE('',#228406,#228407); +#228406 = CARTESIAN_POINT('',(148.246832,-73.916577,1.545)); +#228407 = VECTOR('',#228408,1.); +#228408 = DIRECTION('',(0.258790118469,0.965933576693,0.)); +#228409 = ORIENTED_EDGE('',*,*,#228410,.F.); +#228410 = EDGE_CURVE('',#228411,#228403,#228413,.T.); +#228411 = VERTEX_POINT('',#228412); +#228412 = CARTESIAN_POINT('',(148.252817,-73.894238,1.51)); +#228413 = LINE('',#228414,#228415); +#228414 = CARTESIAN_POINT('',(148.252817,-73.894238,1.51)); +#228415 = VECTOR('',#228416,1.); +#228416 = DIRECTION('',(0.,0.,1.)); +#228417 = ORIENTED_EDGE('',*,*,#228418,.F.); +#228418 = EDGE_CURVE('',#228379,#228411,#228419,.T.); +#228419 = LINE('',#228420,#228421); +#228420 = CARTESIAN_POINT('',(148.246832,-73.916577,1.51)); +#228421 = VECTOR('',#228422,1.); +#228422 = DIRECTION('',(0.258790118469,0.965933576693,0.)); +#228423 = PLANE('',#228424); +#228424 = AXIS2_PLACEMENT_3D('',#228425,#228426,#228427); +#228425 = CARTESIAN_POINT('',(148.246832,-73.916577,1.51)); +#228426 = DIRECTION('',(-0.965933576693,0.258790118469,0.)); +#228427 = DIRECTION('',(0.258790118469,0.965933576693,0.)); +#228428 = ADVANCED_FACE('',(#228429),#228454,.T.); +#228429 = FACE_BOUND('',#228430,.T.); +#228430 = EDGE_LOOP('',(#228431,#228432,#228440,#228448)); +#228431 = ORIENTED_EDGE('',*,*,#228410,.T.); +#228432 = ORIENTED_EDGE('',*,*,#228433,.T.); +#228433 = EDGE_CURVE('',#228403,#228434,#228436,.T.); +#228434 = VERTEX_POINT('',#228435); +#228435 = CARTESIAN_POINT('',(147.916853,-73.555557,1.545)); +#228436 = LINE('',#228437,#228438); +#228437 = CARTESIAN_POINT('',(148.252817,-73.894238,1.545)); +#228438 = VECTOR('',#228439,1.); +#228439 = DIRECTION('',(-0.70425333657,0.709948757256,0.)); +#228440 = ORIENTED_EDGE('',*,*,#228441,.F.); +#228441 = EDGE_CURVE('',#228442,#228434,#228444,.T.); +#228442 = VERTEX_POINT('',#228443); +#228443 = CARTESIAN_POINT('',(147.916853,-73.555557,1.51)); +#228444 = LINE('',#228445,#228446); +#228445 = CARTESIAN_POINT('',(147.916853,-73.555557,1.51)); +#228446 = VECTOR('',#228447,1.); +#228447 = DIRECTION('',(0.,0.,1.)); +#228448 = ORIENTED_EDGE('',*,*,#228449,.F.); +#228449 = EDGE_CURVE('',#228411,#228442,#228450,.T.); +#228450 = LINE('',#228451,#228452); +#228451 = CARTESIAN_POINT('',(148.252817,-73.894238,1.51)); +#228452 = VECTOR('',#228453,1.); +#228453 = DIRECTION('',(-0.70425333657,0.709948757256,0.)); +#228454 = PLANE('',#228455); +#228455 = AXIS2_PLACEMENT_3D('',#228456,#228457,#228458); +#228456 = CARTESIAN_POINT('',(148.252817,-73.894238,1.51)); +#228457 = DIRECTION('',(-0.709948757256,-0.70425333657,0.)); +#228458 = DIRECTION('',(-0.70425333657,0.709948757256,0.)); +#228459 = ADVANCED_FACE('',(#228460),#228485,.T.); +#228460 = FACE_BOUND('',#228461,.T.); +#228461 = EDGE_LOOP('',(#228462,#228463,#228471,#228479)); +#228462 = ORIENTED_EDGE('',*,*,#228441,.T.); +#228463 = ORIENTED_EDGE('',*,*,#228464,.T.); +#228464 = EDGE_CURVE('',#228434,#228465,#228467,.T.); +#228465 = VERTEX_POINT('',#228466); +#228466 = CARTESIAN_POINT('',(147.901921,-73.519509,1.545)); +#228467 = LINE('',#228468,#228469); +#228468 = CARTESIAN_POINT('',(147.916853,-73.555557,1.545)); +#228469 = VECTOR('',#228470,1.); +#228470 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#228471 = ORIENTED_EDGE('',*,*,#228472,.F.); +#228472 = EDGE_CURVE('',#228473,#228465,#228475,.T.); +#228473 = VERTEX_POINT('',#228474); +#228474 = CARTESIAN_POINT('',(147.901921,-73.519509,1.51)); +#228475 = LINE('',#228476,#228477); +#228476 = CARTESIAN_POINT('',(147.901921,-73.519509,1.51)); +#228477 = VECTOR('',#228478,1.); +#228478 = DIRECTION('',(0.,0.,1.)); +#228479 = ORIENTED_EDGE('',*,*,#228480,.F.); +#228480 = EDGE_CURVE('',#228442,#228473,#228481,.T.); +#228481 = LINE('',#228482,#228483); +#228482 = CARTESIAN_POINT('',(147.916853,-73.555557,1.51)); +#228483 = VECTOR('',#228484,1.); +#228484 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#228485 = PLANE('',#228486); +#228486 = AXIS2_PLACEMENT_3D('',#228487,#228488,#228489); +#228487 = CARTESIAN_POINT('',(147.916853,-73.555557,1.51)); +#228488 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#228489 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#228490 = ADVANCED_FACE('',(#228491),#228516,.T.); +#228491 = FACE_BOUND('',#228492,.T.); +#228492 = EDGE_LOOP('',(#228493,#228494,#228502,#228510)); +#228493 = ORIENTED_EDGE('',*,*,#228472,.T.); +#228494 = ORIENTED_EDGE('',*,*,#228495,.T.); +#228495 = EDGE_CURVE('',#228465,#228496,#228498,.T.); +#228496 = VERTEX_POINT('',#228497); +#228497 = CARTESIAN_POINT('',(147.9,-68.79363,1.545)); +#228498 = LINE('',#228499,#228500); +#228499 = CARTESIAN_POINT('',(147.901921,-73.519509,1.545)); +#228500 = VECTOR('',#228501,1.); +#228501 = DIRECTION('',(-4.064851938185E-04,0.999999917385,0.)); +#228502 = ORIENTED_EDGE('',*,*,#228503,.F.); +#228503 = EDGE_CURVE('',#228504,#228496,#228506,.T.); +#228504 = VERTEX_POINT('',#228505); +#228505 = CARTESIAN_POINT('',(147.9,-68.79363,1.51)); +#228506 = LINE('',#228507,#228508); +#228507 = CARTESIAN_POINT('',(147.9,-68.79363,1.51)); +#228508 = VECTOR('',#228509,1.); +#228509 = DIRECTION('',(0.,0.,1.)); +#228510 = ORIENTED_EDGE('',*,*,#228511,.F.); +#228511 = EDGE_CURVE('',#228473,#228504,#228512,.T.); +#228512 = LINE('',#228513,#228514); +#228513 = CARTESIAN_POINT('',(147.901921,-73.519509,1.51)); +#228514 = VECTOR('',#228515,1.); +#228515 = DIRECTION('',(-4.064851938185E-04,0.999999917385,0.)); +#228516 = PLANE('',#228517); +#228517 = AXIS2_PLACEMENT_3D('',#228518,#228519,#228520); +#228518 = CARTESIAN_POINT('',(147.901921,-73.519509,1.51)); +#228519 = DIRECTION('',(-0.999999917385,-4.064851938185E-04,0.)); +#228520 = DIRECTION('',(-4.064851938185E-04,0.999999917385,0.)); +#228521 = ADVANCED_FACE('',(#228522),#228547,.T.); +#228522 = FACE_BOUND('',#228523,.T.); +#228523 = EDGE_LOOP('',(#228524,#228525,#228533,#228541)); +#228524 = ORIENTED_EDGE('',*,*,#228503,.T.); +#228525 = ORIENTED_EDGE('',*,*,#228526,.T.); +#228526 = EDGE_CURVE('',#228496,#228527,#228529,.T.); +#228527 = VERTEX_POINT('',#228528); +#228528 = CARTESIAN_POINT('',(147.753105,-68.646735,1.545)); +#228529 = LINE('',#228530,#228531); +#228530 = CARTESIAN_POINT('',(147.9,-68.79363,1.545)); +#228531 = VECTOR('',#228532,1.); +#228532 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#228533 = ORIENTED_EDGE('',*,*,#228534,.F.); +#228534 = EDGE_CURVE('',#228535,#228527,#228537,.T.); +#228535 = VERTEX_POINT('',#228536); +#228536 = CARTESIAN_POINT('',(147.753105,-68.646735,1.51)); +#228537 = LINE('',#228538,#228539); +#228538 = CARTESIAN_POINT('',(147.753105,-68.646735,1.51)); +#228539 = VECTOR('',#228540,1.); +#228540 = DIRECTION('',(0.,0.,1.)); +#228541 = ORIENTED_EDGE('',*,*,#228542,.F.); +#228542 = EDGE_CURVE('',#228504,#228535,#228543,.T.); +#228543 = LINE('',#228544,#228545); +#228544 = CARTESIAN_POINT('',(147.9,-68.79363,1.51)); +#228545 = VECTOR('',#228546,1.); +#228546 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#228547 = PLANE('',#228548); +#228548 = AXIS2_PLACEMENT_3D('',#228549,#228550,#228551); +#228549 = CARTESIAN_POINT('',(147.9,-68.79363,1.51)); +#228550 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#228551 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#228552 = ADVANCED_FACE('',(#228553),#228578,.T.); +#228553 = FACE_BOUND('',#228554,.T.); +#228554 = EDGE_LOOP('',(#228555,#228556,#228564,#228572)); +#228555 = ORIENTED_EDGE('',*,*,#228534,.T.); +#228556 = ORIENTED_EDGE('',*,*,#228557,.T.); +#228557 = EDGE_CURVE('',#228527,#228558,#228560,.T.); +#228558 = VERTEX_POINT('',#228559); +#228559 = CARTESIAN_POINT('',(147.729289,-68.63071,1.545)); +#228560 = LINE('',#228561,#228562); +#228561 = CARTESIAN_POINT('',(147.753105,-68.646735,1.545)); +#228562 = VECTOR('',#228563,1.); +#228563 = DIRECTION('',(-0.829668424386,0.558256487268,0.)); +#228564 = ORIENTED_EDGE('',*,*,#228565,.F.); +#228565 = EDGE_CURVE('',#228566,#228558,#228568,.T.); +#228566 = VERTEX_POINT('',#228567); +#228567 = CARTESIAN_POINT('',(147.729289,-68.63071,1.51)); +#228568 = LINE('',#228569,#228570); +#228569 = CARTESIAN_POINT('',(147.729289,-68.63071,1.51)); +#228570 = VECTOR('',#228571,1.); +#228571 = DIRECTION('',(0.,0.,1.)); +#228572 = ORIENTED_EDGE('',*,*,#228573,.F.); +#228573 = EDGE_CURVE('',#228535,#228566,#228574,.T.); +#228574 = LINE('',#228575,#228576); +#228575 = CARTESIAN_POINT('',(147.753105,-68.646735,1.51)); +#228576 = VECTOR('',#228577,1.); +#228577 = DIRECTION('',(-0.829668424386,0.558256487268,0.)); +#228578 = PLANE('',#228579); +#228579 = AXIS2_PLACEMENT_3D('',#228580,#228581,#228582); +#228580 = CARTESIAN_POINT('',(147.753105,-68.646735,1.51)); +#228581 = DIRECTION('',(-0.558256487268,-0.829668424386,0.)); +#228582 = DIRECTION('',(-0.829668424386,0.558256487268,0.)); +#228583 = ADVANCED_FACE('',(#228584),#228609,.T.); +#228584 = FACE_BOUND('',#228585,.T.); +#228585 = EDGE_LOOP('',(#228586,#228587,#228595,#228603)); +#228586 = ORIENTED_EDGE('',*,*,#228565,.T.); +#228587 = ORIENTED_EDGE('',*,*,#228588,.T.); +#228588 = EDGE_CURVE('',#228558,#228589,#228591,.T.); +#228589 = VERTEX_POINT('',#228590); +#228590 = CARTESIAN_POINT('',(147.658578,-68.56,1.545)); +#228591 = LINE('',#228592,#228593); +#228592 = CARTESIAN_POINT('',(147.729289,-68.63071,1.545)); +#228593 = VECTOR('',#228594,1.); +#228594 = DIRECTION('',(-0.707111781181,0.707101781156,0.)); +#228595 = ORIENTED_EDGE('',*,*,#228596,.F.); +#228596 = EDGE_CURVE('',#228597,#228589,#228599,.T.); +#228597 = VERTEX_POINT('',#228598); +#228598 = CARTESIAN_POINT('',(147.658578,-68.56,1.51)); +#228599 = LINE('',#228600,#228601); +#228600 = CARTESIAN_POINT('',(147.658578,-68.56,1.51)); +#228601 = VECTOR('',#228602,1.); +#228602 = DIRECTION('',(0.,0.,1.)); +#228603 = ORIENTED_EDGE('',*,*,#228604,.F.); +#228604 = EDGE_CURVE('',#228566,#228597,#228605,.T.); +#228605 = LINE('',#228606,#228607); +#228606 = CARTESIAN_POINT('',(147.729289,-68.63071,1.51)); +#228607 = VECTOR('',#228608,1.); +#228608 = DIRECTION('',(-0.707111781181,0.707101781156,0.)); +#228609 = PLANE('',#228610); +#228610 = AXIS2_PLACEMENT_3D('',#228611,#228612,#228613); +#228611 = CARTESIAN_POINT('',(147.729289,-68.63071,1.51)); +#228612 = DIRECTION('',(-0.707101781156,-0.707111781181,0.)); +#228613 = DIRECTION('',(-0.707111781181,0.707101781156,0.)); +#228614 = ADVANCED_FACE('',(#228615),#228631,.T.); +#228615 = FACE_BOUND('',#228616,.T.); +#228616 = EDGE_LOOP('',(#228617,#228618,#228624,#228625)); +#228617 = ORIENTED_EDGE('',*,*,#228596,.T.); +#228618 = ORIENTED_EDGE('',*,*,#228619,.T.); +#228619 = EDGE_CURVE('',#228589,#228081,#228620,.T.); +#228620 = LINE('',#228621,#228622); +#228621 = CARTESIAN_POINT('',(147.658578,-68.56,1.545)); +#228622 = VECTOR('',#228623,1.); +#228623 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#228624 = ORIENTED_EDGE('',*,*,#228078,.F.); +#228625 = ORIENTED_EDGE('',*,*,#228626,.F.); +#228626 = EDGE_CURVE('',#228597,#228079,#228627,.T.); +#228627 = LINE('',#228628,#228629); +#228628 = CARTESIAN_POINT('',(147.658578,-68.56,1.51)); +#228629 = VECTOR('',#228630,1.); +#228630 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#228631 = PLANE('',#228632); +#228632 = AXIS2_PLACEMENT_3D('',#228633,#228634,#228635); +#228633 = CARTESIAN_POINT('',(147.658578,-68.56,1.51)); +#228634 = DIRECTION('',(-2.069844621208E-03,-0.999997857869,0.)); +#228635 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#228636 = ADVANCED_FACE('',(#228637),#228664,.F.); +#228637 = FACE_BOUND('',#228638,.T.); +#228638 = EDGE_LOOP('',(#228639,#228649,#228656,#228657)); +#228639 = ORIENTED_EDGE('',*,*,#228640,.T.); +#228640 = EDGE_CURVE('',#228641,#228643,#228645,.T.); +#228641 = VERTEX_POINT('',#228642); +#228642 = CARTESIAN_POINT('',(148.68152,-73.955735,1.51)); +#228643 = VERTEX_POINT('',#228644); +#228644 = CARTESIAN_POINT('',(148.68152,-73.955735,1.545)); +#228645 = LINE('',#228646,#228647); +#228646 = CARTESIAN_POINT('',(148.68152,-73.955735,1.51)); +#228647 = VECTOR('',#228648,1.); +#228648 = DIRECTION('',(0.,0.,1.)); +#228649 = ORIENTED_EDGE('',*,*,#228650,.T.); +#228650 = EDGE_CURVE('',#228643,#228643,#228651,.T.); +#228651 = CIRCLE('',#228652,0.137255); +#228652 = AXIS2_PLACEMENT_3D('',#228653,#228654,#228655); +#228653 = CARTESIAN_POINT('',(148.544265,-73.955735,1.545)); +#228654 = DIRECTION('',(0.,0.,1.)); +#228655 = DIRECTION('',(1.,0.,-0.)); +#228656 = ORIENTED_EDGE('',*,*,#228640,.F.); +#228657 = ORIENTED_EDGE('',*,*,#228658,.F.); +#228658 = EDGE_CURVE('',#228641,#228641,#228659,.T.); +#228659 = CIRCLE('',#228660,0.137255); +#228660 = AXIS2_PLACEMENT_3D('',#228661,#228662,#228663); +#228661 = CARTESIAN_POINT('',(148.544265,-73.955735,1.51)); +#228662 = DIRECTION('',(0.,0.,1.)); +#228663 = DIRECTION('',(1.,0.,-0.)); +#228664 = CYLINDRICAL_SURFACE('',#228665,0.137255); +#228665 = AXIS2_PLACEMENT_3D('',#228666,#228667,#228668); +#228666 = CARTESIAN_POINT('',(148.544265,-73.955735,1.51)); +#228667 = DIRECTION('',(-0.,-0.,-1.)); +#228668 = DIRECTION('',(1.,0.,-0.)); +#228669 = ADVANCED_FACE('',(#228670,#228690),#228693,.F.); +#228670 = FACE_BOUND('',#228671,.T.); +#228671 = EDGE_LOOP('',(#228672,#228673,#228674,#228675,#228676,#228677, + #228678,#228679,#228680,#228681,#228682,#228683,#228684,#228685, + #228686,#228687,#228688,#228689)); +#228672 = ORIENTED_EDGE('',*,*,#228105,.T.); +#228673 = ORIENTED_EDGE('',*,*,#228137,.T.); +#228674 = ORIENTED_EDGE('',*,*,#228168,.T.); +#228675 = ORIENTED_EDGE('',*,*,#228199,.T.); +#228676 = ORIENTED_EDGE('',*,*,#228230,.T.); +#228677 = ORIENTED_EDGE('',*,*,#228261,.T.); +#228678 = ORIENTED_EDGE('',*,*,#228292,.T.); +#228679 = ORIENTED_EDGE('',*,*,#228323,.T.); +#228680 = ORIENTED_EDGE('',*,*,#228354,.T.); +#228681 = ORIENTED_EDGE('',*,*,#228386,.T.); +#228682 = ORIENTED_EDGE('',*,*,#228418,.T.); +#228683 = ORIENTED_EDGE('',*,*,#228449,.T.); +#228684 = ORIENTED_EDGE('',*,*,#228480,.T.); +#228685 = ORIENTED_EDGE('',*,*,#228511,.T.); +#228686 = ORIENTED_EDGE('',*,*,#228542,.T.); +#228687 = ORIENTED_EDGE('',*,*,#228573,.T.); +#228688 = ORIENTED_EDGE('',*,*,#228604,.T.); +#228689 = ORIENTED_EDGE('',*,*,#228626,.T.); +#228690 = FACE_BOUND('',#228691,.T.); +#228691 = EDGE_LOOP('',(#228692)); +#228692 = ORIENTED_EDGE('',*,*,#228658,.T.); +#228693 = PLANE('',#228694); +#228694 = AXIS2_PLACEMENT_3D('',#228695,#228696,#228697); +#228695 = CARTESIAN_POINT('',(0.,0.,1.51)); +#228696 = DIRECTION('',(0.,0.,1.)); +#228697 = DIRECTION('',(1.,0.,-0.)); +#228698 = ADVANCED_FACE('',(#228699,#228719),#228722,.T.); +#228699 = FACE_BOUND('',#228700,.F.); +#228700 = EDGE_LOOP('',(#228701,#228702,#228703,#228704,#228705,#228706, + #228707,#228708,#228709,#228710,#228711,#228712,#228713,#228714, + #228715,#228716,#228717,#228718)); +#228701 = ORIENTED_EDGE('',*,*,#228088,.T.); +#228702 = ORIENTED_EDGE('',*,*,#228121,.T.); +#228703 = ORIENTED_EDGE('',*,*,#228152,.T.); +#228704 = ORIENTED_EDGE('',*,*,#228183,.T.); +#228705 = ORIENTED_EDGE('',*,*,#228214,.T.); +#228706 = ORIENTED_EDGE('',*,*,#228245,.T.); +#228707 = ORIENTED_EDGE('',*,*,#228276,.T.); +#228708 = ORIENTED_EDGE('',*,*,#228307,.T.); +#228709 = ORIENTED_EDGE('',*,*,#228338,.T.); +#228710 = ORIENTED_EDGE('',*,*,#228369,.T.); +#228711 = ORIENTED_EDGE('',*,*,#228402,.T.); +#228712 = ORIENTED_EDGE('',*,*,#228433,.T.); +#228713 = ORIENTED_EDGE('',*,*,#228464,.T.); +#228714 = ORIENTED_EDGE('',*,*,#228495,.T.); +#228715 = ORIENTED_EDGE('',*,*,#228526,.T.); +#228716 = ORIENTED_EDGE('',*,*,#228557,.T.); +#228717 = ORIENTED_EDGE('',*,*,#228588,.T.); +#228718 = ORIENTED_EDGE('',*,*,#228619,.T.); +#228719 = FACE_BOUND('',#228720,.F.); +#228720 = EDGE_LOOP('',(#228721)); +#228721 = ORIENTED_EDGE('',*,*,#228650,.T.); +#228722 = PLANE('',#228723); +#228723 = AXIS2_PLACEMENT_3D('',#228724,#228725,#228726); +#228724 = CARTESIAN_POINT('',(0.,0.,1.545)); +#228725 = DIRECTION('',(0.,0.,1.)); +#228726 = DIRECTION('',(1.,0.,-0.)); +#228727 = MANIFOLD_SOLID_BREP('',#228728); +#228728 = CLOSED_SHELL('',(#228729,#228769,#228800,#228831,#228862, + #228893,#228924,#228955,#228988,#229019,#229050,#229081,#229112, + #229143,#229174,#229205,#229238,#229260,#229293,#229326,#229357)); +#228729 = ADVANCED_FACE('',(#228730),#228764,.F.); +#228730 = FACE_BOUND('',#228731,.F.); +#228731 = EDGE_LOOP('',(#228732,#228742,#228750,#228758)); +#228732 = ORIENTED_EDGE('',*,*,#228733,.T.); +#228733 = EDGE_CURVE('',#228734,#228736,#228738,.T.); +#228734 = VERTEX_POINT('',#228735); +#228735 = CARTESIAN_POINT('',(148.644265,-74.236865,0.)); +#228736 = VERTEX_POINT('',#228737); +#228737 = CARTESIAN_POINT('',(148.644265,-74.236865,-3.5E-02)); +#228738 = LINE('',#228739,#228740); +#228739 = CARTESIAN_POINT('',(148.644265,-74.236865,0.)); +#228740 = VECTOR('',#228741,1.); +#228741 = DIRECTION('',(0.,0.,-1.)); +#228742 = ORIENTED_EDGE('',*,*,#228743,.T.); +#228743 = EDGE_CURVE('',#228736,#228744,#228746,.T.); +#228744 = VERTEX_POINT('',#228745); +#228745 = CARTESIAN_POINT('',(148.642344,-77.475244,-3.5E-02)); +#228746 = LINE('',#228747,#228748); +#228747 = CARTESIAN_POINT('',(148.644265,-74.236865,-3.5E-02)); +#228748 = VECTOR('',#228749,1.); +#228749 = DIRECTION('',(-5.93197912288E-04,-0.999999824058,0.)); +#228750 = ORIENTED_EDGE('',*,*,#228751,.F.); +#228751 = EDGE_CURVE('',#228752,#228744,#228754,.T.); +#228752 = VERTEX_POINT('',#228753); +#228753 = CARTESIAN_POINT('',(148.642344,-77.475244,0.)); +#228754 = LINE('',#228755,#228756); +#228755 = CARTESIAN_POINT('',(148.642344,-77.475244,0.)); +#228756 = VECTOR('',#228757,1.); +#228757 = DIRECTION('',(0.,0.,-1.)); +#228758 = ORIENTED_EDGE('',*,*,#228759,.F.); +#228759 = EDGE_CURVE('',#228734,#228752,#228760,.T.); +#228760 = LINE('',#228761,#228762); +#228761 = CARTESIAN_POINT('',(148.644265,-74.236865,0.)); +#228762 = VECTOR('',#228763,1.); +#228763 = DIRECTION('',(-5.93197912288E-04,-0.999999824058,0.)); +#228764 = PLANE('',#228765); +#228765 = AXIS2_PLACEMENT_3D('',#228766,#228767,#228768); +#228766 = CARTESIAN_POINT('',(148.644265,-74.236865,0.)); +#228767 = DIRECTION('',(-0.999999824058,5.93197912288E-04,0.)); +#228768 = DIRECTION('',(-5.93197912288E-04,-0.999999824058,0.)); +#228769 = ADVANCED_FACE('',(#228770),#228795,.F.); +#228770 = FACE_BOUND('',#228771,.F.); +#228771 = EDGE_LOOP('',(#228772,#228773,#228781,#228789)); +#228772 = ORIENTED_EDGE('',*,*,#228751,.T.); +#228773 = ORIENTED_EDGE('',*,*,#228774,.T.); +#228774 = EDGE_CURVE('',#228744,#228775,#228777,.T.); +#228775 = VERTEX_POINT('',#228776); +#228776 = CARTESIAN_POINT('',(148.627412,-77.511292,-3.5E-02)); +#228777 = LINE('',#228778,#228779); +#228778 = CARTESIAN_POINT('',(148.642344,-77.475244,-3.5E-02)); +#228779 = VECTOR('',#228780,1.); +#228780 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#228781 = ORIENTED_EDGE('',*,*,#228782,.F.); +#228782 = EDGE_CURVE('',#228783,#228775,#228785,.T.); +#228783 = VERTEX_POINT('',#228784); +#228784 = CARTESIAN_POINT('',(148.627412,-77.511292,0.)); +#228785 = LINE('',#228786,#228787); +#228786 = CARTESIAN_POINT('',(148.627412,-77.511292,0.)); +#228787 = VECTOR('',#228788,1.); +#228788 = DIRECTION('',(0.,0.,-1.)); +#228789 = ORIENTED_EDGE('',*,*,#228790,.F.); +#228790 = EDGE_CURVE('',#228752,#228783,#228791,.T.); +#228791 = LINE('',#228792,#228793); +#228792 = CARTESIAN_POINT('',(148.642344,-77.475244,0.)); +#228793 = VECTOR('',#228794,1.); +#228794 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#228795 = PLANE('',#228796); +#228796 = AXIS2_PLACEMENT_3D('',#228797,#228798,#228799); +#228797 = CARTESIAN_POINT('',(148.642344,-77.475244,0.)); +#228798 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#228799 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#228800 = ADVANCED_FACE('',(#228801),#228826,.F.); +#228801 = FACE_BOUND('',#228802,.F.); +#228802 = EDGE_LOOP('',(#228803,#228804,#228812,#228820)); +#228803 = ORIENTED_EDGE('',*,*,#228782,.T.); +#228804 = ORIENTED_EDGE('',*,*,#228805,.T.); +#228805 = EDGE_CURVE('',#228775,#228806,#228808,.T.); +#228806 = VERTEX_POINT('',#228807); +#228807 = CARTESIAN_POINT('',(148.6,-77.541422,-3.5E-02)); +#228808 = LINE('',#228809,#228810); +#228809 = CARTESIAN_POINT('',(148.627412,-77.511292,-3.5E-02)); +#228810 = VECTOR('',#228811,1.); +#228811 = DIRECTION('',(-0.672956232506,-0.739682302838,0.)); +#228812 = ORIENTED_EDGE('',*,*,#228813,.F.); +#228813 = EDGE_CURVE('',#228814,#228806,#228816,.T.); +#228814 = VERTEX_POINT('',#228815); +#228815 = CARTESIAN_POINT('',(148.6,-77.541422,0.)); +#228816 = LINE('',#228817,#228818); +#228817 = CARTESIAN_POINT('',(148.6,-77.541422,0.)); +#228818 = VECTOR('',#228819,1.); +#228819 = DIRECTION('',(0.,0.,-1.)); +#228820 = ORIENTED_EDGE('',*,*,#228821,.F.); +#228821 = EDGE_CURVE('',#228783,#228814,#228822,.T.); +#228822 = LINE('',#228823,#228824); +#228823 = CARTESIAN_POINT('',(148.627412,-77.511292,0.)); +#228824 = VECTOR('',#228825,1.); +#228825 = DIRECTION('',(-0.672956232506,-0.739682302838,0.)); +#228826 = PLANE('',#228827); +#228827 = AXIS2_PLACEMENT_3D('',#228828,#228829,#228830); +#228828 = CARTESIAN_POINT('',(148.627412,-77.511292,0.)); +#228829 = DIRECTION('',(-0.739682302838,0.672956232506,0.)); +#228830 = DIRECTION('',(-0.672956232506,-0.739682302838,0.)); +#228831 = ADVANCED_FACE('',(#228832),#228857,.F.); +#228832 = FACE_BOUND('',#228833,.F.); +#228833 = EDGE_LOOP('',(#228834,#228835,#228843,#228851)); +#228834 = ORIENTED_EDGE('',*,*,#228813,.T.); +#228835 = ORIENTED_EDGE('',*,*,#228836,.T.); +#228836 = EDGE_CURVE('',#228806,#228837,#228839,.T.); +#228837 = VERTEX_POINT('',#228838); +#228838 = CARTESIAN_POINT('',(148.598079,-85.519509,-3.5E-02)); +#228839 = LINE('',#228840,#228841); +#228840 = CARTESIAN_POINT('',(148.6,-77.541422,-3.5E-02)); +#228841 = VECTOR('',#228842,1.); +#228842 = DIRECTION('',(-2.407845319679E-04,-0.999999971011,0.)); +#228843 = ORIENTED_EDGE('',*,*,#228844,.F.); +#228844 = EDGE_CURVE('',#228845,#228837,#228847,.T.); +#228845 = VERTEX_POINT('',#228846); +#228846 = CARTESIAN_POINT('',(148.598079,-85.519509,0.)); +#228847 = LINE('',#228848,#228849); +#228848 = CARTESIAN_POINT('',(148.598079,-85.519509,0.)); +#228849 = VECTOR('',#228850,1.); +#228850 = DIRECTION('',(0.,0.,-1.)); +#228851 = ORIENTED_EDGE('',*,*,#228852,.F.); +#228852 = EDGE_CURVE('',#228814,#228845,#228853,.T.); +#228853 = LINE('',#228854,#228855); +#228854 = CARTESIAN_POINT('',(148.6,-77.541422,0.)); +#228855 = VECTOR('',#228856,1.); +#228856 = DIRECTION('',(-2.407845319679E-04,-0.999999971011,0.)); +#228857 = PLANE('',#228858); +#228858 = AXIS2_PLACEMENT_3D('',#228859,#228860,#228861); +#228859 = CARTESIAN_POINT('',(148.6,-77.541422,0.)); +#228860 = DIRECTION('',(-0.999999971011,2.407845319679E-04,0.)); +#228861 = DIRECTION('',(-2.407845319679E-04,-0.999999971011,0.)); +#228862 = ADVANCED_FACE('',(#228863),#228888,.F.); +#228863 = FACE_BOUND('',#228864,.F.); +#228864 = EDGE_LOOP('',(#228865,#228866,#228874,#228882)); +#228865 = ORIENTED_EDGE('',*,*,#228844,.T.); +#228866 = ORIENTED_EDGE('',*,*,#228867,.T.); +#228867 = EDGE_CURVE('',#228837,#228868,#228870,.T.); +#228868 = VERTEX_POINT('',#228869); +#228869 = CARTESIAN_POINT('',(148.583148,-85.555557,-3.5E-02)); +#228870 = LINE('',#228871,#228872); +#228871 = CARTESIAN_POINT('',(148.598079,-85.519509,-3.5E-02)); +#228872 = VECTOR('',#228873,1.); +#228873 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#228874 = ORIENTED_EDGE('',*,*,#228875,.F.); +#228875 = EDGE_CURVE('',#228876,#228868,#228878,.T.); +#228876 = VERTEX_POINT('',#228877); +#228877 = CARTESIAN_POINT('',(148.583148,-85.555557,0.)); +#228878 = LINE('',#228879,#228880); +#228879 = CARTESIAN_POINT('',(148.583148,-85.555557,0.)); +#228880 = VECTOR('',#228881,1.); +#228881 = DIRECTION('',(0.,0.,-1.)); +#228882 = ORIENTED_EDGE('',*,*,#228883,.F.); +#228883 = EDGE_CURVE('',#228845,#228876,#228884,.T.); +#228884 = LINE('',#228885,#228886); +#228885 = CARTESIAN_POINT('',(148.598079,-85.519509,0.)); +#228886 = VECTOR('',#228887,1.); +#228887 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#228888 = PLANE('',#228889); +#228889 = AXIS2_PLACEMENT_3D('',#228890,#228891,#228892); +#228890 = CARTESIAN_POINT('',(148.598079,-85.519509,0.)); +#228891 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#228892 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#228893 = ADVANCED_FACE('',(#228894),#228919,.F.); +#228894 = FACE_BOUND('',#228895,.F.); +#228895 = EDGE_LOOP('',(#228896,#228897,#228905,#228913)); +#228896 = ORIENTED_EDGE('',*,*,#228875,.T.); +#228897 = ORIENTED_EDGE('',*,*,#228898,.T.); +#228898 = EDGE_CURVE('',#228868,#228899,#228901,.T.); +#228899 = VERTEX_POINT('',#228900); +#228900 = CARTESIAN_POINT('',(147.7695,-86.371921,-3.5E-02)); +#228901 = LINE('',#228902,#228903); +#228902 = CARTESIAN_POINT('',(148.583148,-85.555557,-3.5E-02)); +#228903 = VECTOR('',#228904,1.); +#228904 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#228905 = ORIENTED_EDGE('',*,*,#228906,.F.); +#228906 = EDGE_CURVE('',#228907,#228899,#228909,.T.); +#228907 = VERTEX_POINT('',#228908); +#228908 = CARTESIAN_POINT('',(147.7695,-86.371921,0.)); +#228909 = LINE('',#228910,#228911); +#228910 = CARTESIAN_POINT('',(147.7695,-86.371921,0.)); +#228911 = VECTOR('',#228912,1.); +#228912 = DIRECTION('',(0.,0.,-1.)); +#228913 = ORIENTED_EDGE('',*,*,#228914,.F.); +#228914 = EDGE_CURVE('',#228876,#228907,#228915,.T.); +#228915 = LINE('',#228916,#228917); +#228916 = CARTESIAN_POINT('',(148.583148,-85.555557,0.)); +#228917 = VECTOR('',#228918,1.); +#228918 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#228919 = PLANE('',#228920); +#228920 = AXIS2_PLACEMENT_3D('',#228921,#228922,#228923); +#228921 = CARTESIAN_POINT('',(148.583148,-85.555557,0.)); +#228922 = DIRECTION('',(-0.708284011379,0.705927587805,0.)); +#228923 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#228924 = ADVANCED_FACE('',(#228925),#228950,.F.); +#228925 = FACE_BOUND('',#228926,.F.); +#228926 = EDGE_LOOP('',(#228927,#228928,#228936,#228944)); +#228927 = ORIENTED_EDGE('',*,*,#228906,.T.); +#228928 = ORIENTED_EDGE('',*,*,#228929,.T.); +#228929 = EDGE_CURVE('',#228899,#228930,#228932,.T.); +#228930 = VERTEX_POINT('',#228931); +#228931 = CARTESIAN_POINT('',(147.777164,-86.385195,-3.5E-02)); +#228932 = LINE('',#228933,#228934); +#228933 = CARTESIAN_POINT('',(147.7695,-86.371921,-3.5E-02)); +#228934 = VECTOR('',#228935,1.); +#228935 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#228936 = ORIENTED_EDGE('',*,*,#228937,.F.); +#228937 = EDGE_CURVE('',#228938,#228930,#228940,.T.); +#228938 = VERTEX_POINT('',#228939); +#228939 = CARTESIAN_POINT('',(147.777164,-86.385195,0.)); +#228940 = LINE('',#228941,#228942); +#228941 = CARTESIAN_POINT('',(147.777164,-86.385195,0.)); +#228942 = VECTOR('',#228943,1.); +#228943 = DIRECTION('',(0.,0.,-1.)); +#228944 = ORIENTED_EDGE('',*,*,#228945,.F.); +#228945 = EDGE_CURVE('',#228907,#228938,#228946,.T.); +#228946 = LINE('',#228947,#228948); +#228947 = CARTESIAN_POINT('',(147.7695,-86.371921,0.)); +#228948 = VECTOR('',#228949,1.); +#228949 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#228950 = PLANE('',#228951); +#228951 = AXIS2_PLACEMENT_3D('',#228952,#228953,#228954); +#228952 = CARTESIAN_POINT('',(147.7695,-86.371921,0.)); +#228953 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#228954 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#228955 = ADVANCED_FACE('',(#228956),#228983,.T.); +#228956 = FACE_BOUND('',#228957,.F.); +#228957 = EDGE_LOOP('',(#228958,#228959,#228968,#228976)); +#228958 = ORIENTED_EDGE('',*,*,#228937,.T.); +#228959 = ORIENTED_EDGE('',*,*,#228960,.T.); +#228960 = EDGE_CURVE('',#228930,#228961,#228963,.T.); +#228961 = VERTEX_POINT('',#228962); +#228962 = CARTESIAN_POINT('',(147.614805,-86.222836,-3.5E-02)); +#228963 = CIRCLE('',#228964,0.299999934501); +#228964 = AXIS2_PLACEMENT_3D('',#228965,#228966,#228967); +#228965 = CARTESIAN_POINT('',(147.50000014059,-86.4999998594,-3.5E-02)); +#228966 = DIRECTION('',(0.,0.,-1.)); +#228967 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#228968 = ORIENTED_EDGE('',*,*,#228969,.F.); +#228969 = EDGE_CURVE('',#228970,#228961,#228972,.T.); +#228970 = VERTEX_POINT('',#228971); +#228971 = CARTESIAN_POINT('',(147.614805,-86.222836,0.)); +#228972 = LINE('',#228973,#228974); +#228973 = CARTESIAN_POINT('',(147.614805,-86.222836,0.)); +#228974 = VECTOR('',#228975,1.); +#228975 = DIRECTION('',(0.,0.,-1.)); +#228976 = ORIENTED_EDGE('',*,*,#228977,.F.); +#228977 = EDGE_CURVE('',#228938,#228970,#228978,.T.); +#228978 = CIRCLE('',#228979,0.299999934501); +#228979 = AXIS2_PLACEMENT_3D('',#228980,#228981,#228982); +#228980 = CARTESIAN_POINT('',(147.50000014059,-86.4999998594,0.)); +#228981 = DIRECTION('',(0.,0.,-1.)); +#228982 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#228983 = CYLINDRICAL_SURFACE('',#228984,0.299999934501); +#228984 = AXIS2_PLACEMENT_3D('',#228985,#228986,#228987); +#228985 = CARTESIAN_POINT('',(147.50000014059,-86.4999998594,0.)); +#228986 = DIRECTION('',(-0.,-0.,1.)); +#228987 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#228988 = ADVANCED_FACE('',(#228989),#229014,.F.); +#228989 = FACE_BOUND('',#228990,.F.); +#228990 = EDGE_LOOP('',(#228991,#228992,#229000,#229008)); +#228991 = ORIENTED_EDGE('',*,*,#228969,.T.); +#228992 = ORIENTED_EDGE('',*,*,#228993,.T.); +#228993 = EDGE_CURVE('',#228961,#228994,#228996,.T.); +#228994 = VERTEX_POINT('',#228995); +#228995 = CARTESIAN_POINT('',(147.628078,-86.230499,-3.5E-02)); +#228996 = LINE('',#228997,#228998); +#228997 = CARTESIAN_POINT('',(147.614805,-86.222836,-3.5E-02)); +#228998 = VECTOR('',#228999,1.); +#228999 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#229000 = ORIENTED_EDGE('',*,*,#229001,.F.); +#229001 = EDGE_CURVE('',#229002,#228994,#229004,.T.); +#229002 = VERTEX_POINT('',#229003); +#229003 = CARTESIAN_POINT('',(147.628078,-86.230499,0.)); +#229004 = LINE('',#229005,#229006); +#229005 = CARTESIAN_POINT('',(147.628078,-86.230499,0.)); +#229006 = VECTOR('',#229007,1.); +#229007 = DIRECTION('',(0.,0.,-1.)); +#229008 = ORIENTED_EDGE('',*,*,#229009,.F.); +#229009 = EDGE_CURVE('',#228970,#229002,#229010,.T.); +#229010 = LINE('',#229011,#229012); +#229011 = CARTESIAN_POINT('',(147.614805,-86.222836,0.)); +#229012 = VECTOR('',#229013,1.); +#229013 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#229014 = PLANE('',#229015); +#229015 = AXIS2_PLACEMENT_3D('',#229016,#229017,#229018); +#229016 = CARTESIAN_POINT('',(147.614805,-86.222836,0.)); +#229017 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#229018 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#229019 = ADVANCED_FACE('',(#229020),#229045,.F.); +#229020 = FACE_BOUND('',#229021,.F.); +#229021 = EDGE_LOOP('',(#229022,#229023,#229031,#229039)); +#229022 = ORIENTED_EDGE('',*,*,#229001,.T.); +#229023 = ORIENTED_EDGE('',*,*,#229024,.T.); +#229024 = EDGE_CURVE('',#228994,#229025,#229027,.T.); +#229025 = VERTEX_POINT('',#229026); +#229026 = CARTESIAN_POINT('',(148.4,-85.458578,-3.5E-02)); +#229027 = LINE('',#229028,#229029); +#229028 = CARTESIAN_POINT('',(147.628078,-86.230499,-3.5E-02)); +#229029 = VECTOR('',#229030,1.); +#229030 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#229031 = ORIENTED_EDGE('',*,*,#229032,.F.); +#229032 = EDGE_CURVE('',#229033,#229025,#229035,.T.); +#229033 = VERTEX_POINT('',#229034); +#229034 = CARTESIAN_POINT('',(148.4,-85.458578,0.)); +#229035 = LINE('',#229036,#229037); +#229036 = CARTESIAN_POINT('',(148.4,-85.458578,0.)); +#229037 = VECTOR('',#229038,1.); +#229038 = DIRECTION('',(0.,0.,-1.)); +#229039 = ORIENTED_EDGE('',*,*,#229040,.F.); +#229040 = EDGE_CURVE('',#229002,#229033,#229041,.T.); +#229041 = LINE('',#229042,#229043); +#229042 = CARTESIAN_POINT('',(147.628078,-86.230499,0.)); +#229043 = VECTOR('',#229044,1.); +#229044 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#229045 = PLANE('',#229046); +#229046 = AXIS2_PLACEMENT_3D('',#229047,#229048,#229049); +#229047 = CARTESIAN_POINT('',(147.628078,-86.230499,0.)); +#229048 = DIRECTION('',(0.707106323169,-0.707107239204,0.)); +#229049 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#229050 = ADVANCED_FACE('',(#229051),#229076,.F.); +#229051 = FACE_BOUND('',#229052,.F.); +#229052 = EDGE_LOOP('',(#229053,#229054,#229062,#229070)); +#229053 = ORIENTED_EDGE('',*,*,#229032,.T.); +#229054 = ORIENTED_EDGE('',*,*,#229055,.T.); +#229055 = EDGE_CURVE('',#229025,#229056,#229058,.T.); +#229056 = VERTEX_POINT('',#229057); +#229057 = CARTESIAN_POINT('',(148.401921,-77.480491,-3.5E-02)); +#229058 = LINE('',#229059,#229060); +#229059 = CARTESIAN_POINT('',(148.4,-85.458578,-3.5E-02)); +#229060 = VECTOR('',#229061,1.); +#229061 = DIRECTION('',(2.407845319679E-04,0.999999971011,0.)); +#229062 = ORIENTED_EDGE('',*,*,#229063,.F.); +#229063 = EDGE_CURVE('',#229064,#229056,#229066,.T.); +#229064 = VERTEX_POINT('',#229065); +#229065 = CARTESIAN_POINT('',(148.401921,-77.480491,0.)); +#229066 = LINE('',#229067,#229068); +#229067 = CARTESIAN_POINT('',(148.401921,-77.480491,0.)); +#229068 = VECTOR('',#229069,1.); +#229069 = DIRECTION('',(0.,0.,-1.)); +#229070 = ORIENTED_EDGE('',*,*,#229071,.F.); +#229071 = EDGE_CURVE('',#229033,#229064,#229072,.T.); +#229072 = LINE('',#229073,#229074); +#229073 = CARTESIAN_POINT('',(148.4,-85.458578,0.)); +#229074 = VECTOR('',#229075,1.); +#229075 = DIRECTION('',(2.407845319679E-04,0.999999971011,0.)); +#229076 = PLANE('',#229077); +#229077 = AXIS2_PLACEMENT_3D('',#229078,#229079,#229080); +#229078 = CARTESIAN_POINT('',(148.4,-85.458578,0.)); +#229079 = DIRECTION('',(0.999999971011,-2.407845319679E-04,0.)); +#229080 = DIRECTION('',(2.407845319679E-04,0.999999971011,0.)); +#229081 = ADVANCED_FACE('',(#229082),#229107,.F.); +#229082 = FACE_BOUND('',#229083,.F.); +#229083 = EDGE_LOOP('',(#229084,#229085,#229093,#229101)); +#229084 = ORIENTED_EDGE('',*,*,#229063,.T.); +#229085 = ORIENTED_EDGE('',*,*,#229086,.T.); +#229086 = EDGE_CURVE('',#229056,#229087,#229089,.T.); +#229087 = VERTEX_POINT('',#229088); +#229088 = CARTESIAN_POINT('',(148.416853,-77.444443,-3.5E-02)); +#229089 = LINE('',#229090,#229091); +#229090 = CARTESIAN_POINT('',(148.401921,-77.480491,-3.5E-02)); +#229091 = VECTOR('',#229092,1.); +#229092 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229093 = ORIENTED_EDGE('',*,*,#229094,.F.); +#229094 = EDGE_CURVE('',#229095,#229087,#229097,.T.); +#229095 = VERTEX_POINT('',#229096); +#229096 = CARTESIAN_POINT('',(148.416853,-77.444443,0.)); +#229097 = LINE('',#229098,#229099); +#229098 = CARTESIAN_POINT('',(148.416853,-77.444443,0.)); +#229099 = VECTOR('',#229100,1.); +#229100 = DIRECTION('',(0.,0.,-1.)); +#229101 = ORIENTED_EDGE('',*,*,#229102,.F.); +#229102 = EDGE_CURVE('',#229064,#229095,#229103,.T.); +#229103 = LINE('',#229104,#229105); +#229104 = CARTESIAN_POINT('',(148.401921,-77.480491,0.)); +#229105 = VECTOR('',#229106,1.); +#229106 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229107 = PLANE('',#229108); +#229108 = AXIS2_PLACEMENT_3D('',#229109,#229110,#229111); +#229109 = CARTESIAN_POINT('',(148.401921,-77.480491,0.)); +#229110 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#229111 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#229112 = ADVANCED_FACE('',(#229113),#229138,.F.); +#229113 = FACE_BOUND('',#229114,.F.); +#229114 = EDGE_LOOP('',(#229115,#229116,#229124,#229132)); +#229115 = ORIENTED_EDGE('',*,*,#229094,.T.); +#229116 = ORIENTED_EDGE('',*,*,#229117,.T.); +#229117 = EDGE_CURVE('',#229087,#229118,#229120,.T.); +#229118 = VERTEX_POINT('',#229119); +#229119 = CARTESIAN_POINT('',(148.444265,-77.414313,-3.5E-02)); +#229120 = LINE('',#229121,#229122); +#229121 = CARTESIAN_POINT('',(148.416853,-77.444443,-3.5E-02)); +#229122 = VECTOR('',#229123,1.); +#229123 = DIRECTION('',(0.672956232506,0.739682302838,0.)); +#229124 = ORIENTED_EDGE('',*,*,#229125,.F.); +#229125 = EDGE_CURVE('',#229126,#229118,#229128,.T.); +#229126 = VERTEX_POINT('',#229127); +#229127 = CARTESIAN_POINT('',(148.444265,-77.414313,0.)); +#229128 = LINE('',#229129,#229130); +#229129 = CARTESIAN_POINT('',(148.444265,-77.414313,0.)); +#229130 = VECTOR('',#229131,1.); +#229131 = DIRECTION('',(0.,0.,-1.)); +#229132 = ORIENTED_EDGE('',*,*,#229133,.F.); +#229133 = EDGE_CURVE('',#229095,#229126,#229134,.T.); +#229134 = LINE('',#229135,#229136); +#229135 = CARTESIAN_POINT('',(148.416853,-77.444443,0.)); +#229136 = VECTOR('',#229137,1.); +#229137 = DIRECTION('',(0.672956232506,0.739682302838,0.)); +#229138 = PLANE('',#229139); +#229139 = AXIS2_PLACEMENT_3D('',#229140,#229141,#229142); +#229140 = CARTESIAN_POINT('',(148.416853,-77.444443,0.)); +#229141 = DIRECTION('',(0.739682302838,-0.672956232506,0.)); +#229142 = DIRECTION('',(0.672956232506,0.739682302838,0.)); +#229143 = ADVANCED_FACE('',(#229144),#229169,.F.); +#229144 = FACE_BOUND('',#229145,.F.); +#229145 = EDGE_LOOP('',(#229146,#229147,#229155,#229163)); +#229146 = ORIENTED_EDGE('',*,*,#229125,.T.); +#229147 = ORIENTED_EDGE('',*,*,#229148,.T.); +#229148 = EDGE_CURVE('',#229118,#229149,#229151,.T.); +#229149 = VERTEX_POINT('',#229150); +#229150 = CARTESIAN_POINT('',(148.444265,-74.236865,-3.5E-02)); +#229151 = LINE('',#229152,#229153); +#229152 = CARTESIAN_POINT('',(148.444265,-77.414313,-3.5E-02)); +#229153 = VECTOR('',#229154,1.); +#229154 = DIRECTION('',(0.,1.,0.)); +#229155 = ORIENTED_EDGE('',*,*,#229156,.F.); +#229156 = EDGE_CURVE('',#229157,#229149,#229159,.T.); +#229157 = VERTEX_POINT('',#229158); +#229158 = CARTESIAN_POINT('',(148.444265,-74.236865,0.)); +#229159 = LINE('',#229160,#229161); +#229160 = CARTESIAN_POINT('',(148.444265,-74.236865,0.)); +#229161 = VECTOR('',#229162,1.); +#229162 = DIRECTION('',(0.,0.,-1.)); +#229163 = ORIENTED_EDGE('',*,*,#229164,.F.); +#229164 = EDGE_CURVE('',#229126,#229157,#229165,.T.); +#229165 = LINE('',#229166,#229167); +#229166 = CARTESIAN_POINT('',(148.444265,-77.414313,0.)); +#229167 = VECTOR('',#229168,1.); +#229168 = DIRECTION('',(0.,1.,0.)); +#229169 = PLANE('',#229170); +#229170 = AXIS2_PLACEMENT_3D('',#229171,#229172,#229173); +#229171 = CARTESIAN_POINT('',(148.444265,-77.414313,0.)); +#229172 = DIRECTION('',(1.,-0.,0.)); +#229173 = DIRECTION('',(0.,1.,0.)); +#229174 = ADVANCED_FACE('',(#229175),#229200,.F.); +#229175 = FACE_BOUND('',#229176,.F.); +#229176 = EDGE_LOOP('',(#229177,#229178,#229186,#229194)); +#229177 = ORIENTED_EDGE('',*,*,#229156,.T.); +#229178 = ORIENTED_EDGE('',*,*,#229179,.T.); +#229179 = EDGE_CURVE('',#229149,#229180,#229182,.T.); +#229180 = VERTEX_POINT('',#229181); +#229181 = CARTESIAN_POINT('',(148.42946,-74.232899,-3.5E-02)); +#229182 = LINE('',#229183,#229184); +#229183 = CARTESIAN_POINT('',(148.444265,-74.236865,-3.5E-02)); +#229184 = VECTOR('',#229185,1.); +#229185 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#229186 = ORIENTED_EDGE('',*,*,#229187,.F.); +#229187 = EDGE_CURVE('',#229188,#229180,#229190,.T.); +#229188 = VERTEX_POINT('',#229189); +#229189 = CARTESIAN_POINT('',(148.42946,-74.232899,0.)); +#229190 = LINE('',#229191,#229192); +#229191 = CARTESIAN_POINT('',(148.42946,-74.232899,0.)); +#229192 = VECTOR('',#229193,1.); +#229193 = DIRECTION('',(0.,0.,-1.)); +#229194 = ORIENTED_EDGE('',*,*,#229195,.F.); +#229195 = EDGE_CURVE('',#229157,#229188,#229196,.T.); +#229196 = LINE('',#229197,#229198); +#229197 = CARTESIAN_POINT('',(148.444265,-74.236865,0.)); +#229198 = VECTOR('',#229199,1.); +#229199 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#229200 = PLANE('',#229201); +#229201 = AXIS2_PLACEMENT_3D('',#229202,#229203,#229204); +#229202 = CARTESIAN_POINT('',(148.444265,-74.236865,0.)); +#229203 = DIRECTION('',(0.258758913864,0.9659419364,0.)); +#229204 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#229205 = ADVANCED_FACE('',(#229206),#229233,.T.); +#229206 = FACE_BOUND('',#229207,.F.); +#229207 = EDGE_LOOP('',(#229208,#229209,#229218,#229226)); +#229208 = ORIENTED_EDGE('',*,*,#229187,.T.); +#229209 = ORIENTED_EDGE('',*,*,#229210,.T.); +#229210 = EDGE_CURVE('',#229180,#229211,#229213,.T.); +#229211 = VERTEX_POINT('',#229212); +#229212 = CARTESIAN_POINT('',(148.65907,-74.232899,-3.5E-02)); +#229213 = CIRCLE('',#229214,0.299999472923); +#229214 = AXIS2_PLACEMENT_3D('',#229215,#229216,#229217); +#229215 = CARTESIAN_POINT('',(148.544265,-73.95573569844,-3.5E-02)); +#229216 = DIRECTION('',(0.,0.,-1.)); +#229217 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#229218 = ORIENTED_EDGE('',*,*,#229219,.F.); +#229219 = EDGE_CURVE('',#229220,#229211,#229222,.T.); +#229220 = VERTEX_POINT('',#229221); +#229221 = CARTESIAN_POINT('',(148.65907,-74.232899,0.)); +#229222 = LINE('',#229223,#229224); +#229223 = CARTESIAN_POINT('',(148.65907,-74.232899,0.)); +#229224 = VECTOR('',#229225,1.); +#229225 = DIRECTION('',(0.,0.,-1.)); +#229226 = ORIENTED_EDGE('',*,*,#229227,.F.); +#229227 = EDGE_CURVE('',#229188,#229220,#229228,.T.); +#229228 = CIRCLE('',#229229,0.299999472923); +#229229 = AXIS2_PLACEMENT_3D('',#229230,#229231,#229232); +#229230 = CARTESIAN_POINT('',(148.544265,-73.95573569844,0.)); +#229231 = DIRECTION('',(0.,0.,-1.)); +#229232 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#229233 = CYLINDRICAL_SURFACE('',#229234,0.299999472923); +#229234 = AXIS2_PLACEMENT_3D('',#229235,#229236,#229237); +#229235 = CARTESIAN_POINT('',(148.544265,-73.95573569844,0.)); +#229236 = DIRECTION('',(-0.,-0.,1.)); +#229237 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#229238 = ADVANCED_FACE('',(#229239),#229255,.F.); +#229239 = FACE_BOUND('',#229240,.F.); +#229240 = EDGE_LOOP('',(#229241,#229242,#229248,#229249)); +#229241 = ORIENTED_EDGE('',*,*,#229219,.T.); +#229242 = ORIENTED_EDGE('',*,*,#229243,.T.); +#229243 = EDGE_CURVE('',#229211,#228736,#229244,.T.); +#229244 = LINE('',#229245,#229246); +#229245 = CARTESIAN_POINT('',(148.65907,-74.232899,-3.5E-02)); +#229246 = VECTOR('',#229247,1.); +#229247 = DIRECTION('',(-0.9659419364,-0.258758913863,0.)); +#229248 = ORIENTED_EDGE('',*,*,#228733,.F.); +#229249 = ORIENTED_EDGE('',*,*,#229250,.F.); +#229250 = EDGE_CURVE('',#229220,#228734,#229251,.T.); +#229251 = LINE('',#229252,#229253); +#229252 = CARTESIAN_POINT('',(148.65907,-74.232899,0.)); +#229253 = VECTOR('',#229254,1.); +#229254 = DIRECTION('',(-0.9659419364,-0.258758913863,0.)); +#229255 = PLANE('',#229256); +#229256 = AXIS2_PLACEMENT_3D('',#229257,#229258,#229259); +#229257 = CARTESIAN_POINT('',(148.65907,-74.232899,0.)); +#229258 = DIRECTION('',(-0.258758913863,0.9659419364,0.)); +#229259 = DIRECTION('',(-0.9659419364,-0.258758913863,0.)); +#229260 = ADVANCED_FACE('',(#229261),#229288,.F.); +#229261 = FACE_BOUND('',#229262,.F.); +#229262 = EDGE_LOOP('',(#229263,#229273,#229280,#229281)); +#229263 = ORIENTED_EDGE('',*,*,#229264,.T.); +#229264 = EDGE_CURVE('',#229265,#229267,#229269,.T.); +#229265 = VERTEX_POINT('',#229266); +#229266 = CARTESIAN_POINT('',(147.637255,-86.5,0.)); +#229267 = VERTEX_POINT('',#229268); +#229268 = CARTESIAN_POINT('',(147.637255,-86.5,-3.5E-02)); +#229269 = LINE('',#229270,#229271); +#229270 = CARTESIAN_POINT('',(147.637255,-86.5,0.)); +#229271 = VECTOR('',#229272,1.); +#229272 = DIRECTION('',(0.,0.,-1.)); +#229273 = ORIENTED_EDGE('',*,*,#229274,.T.); +#229274 = EDGE_CURVE('',#229267,#229267,#229275,.T.); +#229275 = CIRCLE('',#229276,0.137255); +#229276 = AXIS2_PLACEMENT_3D('',#229277,#229278,#229279); +#229277 = CARTESIAN_POINT('',(147.5,-86.5,-3.5E-02)); +#229278 = DIRECTION('',(0.,0.,1.)); +#229279 = DIRECTION('',(1.,0.,-0.)); +#229280 = ORIENTED_EDGE('',*,*,#229264,.F.); +#229281 = ORIENTED_EDGE('',*,*,#229282,.F.); +#229282 = EDGE_CURVE('',#229265,#229265,#229283,.T.); +#229283 = CIRCLE('',#229284,0.137255); +#229284 = AXIS2_PLACEMENT_3D('',#229285,#229286,#229287); +#229285 = CARTESIAN_POINT('',(147.5,-86.5,0.)); +#229286 = DIRECTION('',(0.,0.,1.)); +#229287 = DIRECTION('',(1.,0.,-0.)); +#229288 = CYLINDRICAL_SURFACE('',#229289,0.137255); +#229289 = AXIS2_PLACEMENT_3D('',#229290,#229291,#229292); +#229290 = CARTESIAN_POINT('',(147.5,-86.5,0.)); +#229291 = DIRECTION('',(0.,0.,1.)); +#229292 = DIRECTION('',(1.,0.,-0.)); +#229293 = ADVANCED_FACE('',(#229294),#229321,.F.); +#229294 = FACE_BOUND('',#229295,.F.); +#229295 = EDGE_LOOP('',(#229296,#229306,#229313,#229314)); +#229296 = ORIENTED_EDGE('',*,*,#229297,.T.); +#229297 = EDGE_CURVE('',#229298,#229300,#229302,.T.); +#229298 = VERTEX_POINT('',#229299); +#229299 = CARTESIAN_POINT('',(148.68152,-73.955735,0.)); +#229300 = VERTEX_POINT('',#229301); +#229301 = CARTESIAN_POINT('',(148.68152,-73.955735,-3.5E-02)); +#229302 = LINE('',#229303,#229304); +#229303 = CARTESIAN_POINT('',(148.68152,-73.955735,0.)); +#229304 = VECTOR('',#229305,1.); +#229305 = DIRECTION('',(0.,0.,-1.)); +#229306 = ORIENTED_EDGE('',*,*,#229307,.T.); +#229307 = EDGE_CURVE('',#229300,#229300,#229308,.T.); +#229308 = CIRCLE('',#229309,0.137255); +#229309 = AXIS2_PLACEMENT_3D('',#229310,#229311,#229312); +#229310 = CARTESIAN_POINT('',(148.544265,-73.955735,-3.5E-02)); +#229311 = DIRECTION('',(0.,0.,1.)); +#229312 = DIRECTION('',(1.,0.,-0.)); +#229313 = ORIENTED_EDGE('',*,*,#229297,.F.); +#229314 = ORIENTED_EDGE('',*,*,#229315,.F.); +#229315 = EDGE_CURVE('',#229298,#229298,#229316,.T.); +#229316 = CIRCLE('',#229317,0.137255); +#229317 = AXIS2_PLACEMENT_3D('',#229318,#229319,#229320); +#229318 = CARTESIAN_POINT('',(148.544265,-73.955735,0.)); +#229319 = DIRECTION('',(0.,0.,1.)); +#229320 = DIRECTION('',(1.,0.,-0.)); +#229321 = CYLINDRICAL_SURFACE('',#229322,0.137255); +#229322 = AXIS2_PLACEMENT_3D('',#229323,#229324,#229325); +#229323 = CARTESIAN_POINT('',(148.544265,-73.955735,0.)); +#229324 = DIRECTION('',(0.,0.,1.)); +#229325 = DIRECTION('',(1.,0.,-0.)); +#229326 = ADVANCED_FACE('',(#229327,#229346,#229349),#229352,.F.); +#229327 = FACE_BOUND('',#229328,.F.); +#229328 = EDGE_LOOP('',(#229329,#229330,#229331,#229332,#229333,#229334, + #229335,#229336,#229337,#229338,#229339,#229340,#229341,#229342, + #229343,#229344,#229345)); +#229329 = ORIENTED_EDGE('',*,*,#228759,.T.); +#229330 = ORIENTED_EDGE('',*,*,#228790,.T.); +#229331 = ORIENTED_EDGE('',*,*,#228821,.T.); +#229332 = ORIENTED_EDGE('',*,*,#228852,.T.); +#229333 = ORIENTED_EDGE('',*,*,#228883,.T.); +#229334 = ORIENTED_EDGE('',*,*,#228914,.T.); +#229335 = ORIENTED_EDGE('',*,*,#228945,.T.); +#229336 = ORIENTED_EDGE('',*,*,#228977,.T.); +#229337 = ORIENTED_EDGE('',*,*,#229009,.T.); +#229338 = ORIENTED_EDGE('',*,*,#229040,.T.); +#229339 = ORIENTED_EDGE('',*,*,#229071,.T.); +#229340 = ORIENTED_EDGE('',*,*,#229102,.T.); +#229341 = ORIENTED_EDGE('',*,*,#229133,.T.); +#229342 = ORIENTED_EDGE('',*,*,#229164,.T.); +#229343 = ORIENTED_EDGE('',*,*,#229195,.T.); +#229344 = ORIENTED_EDGE('',*,*,#229227,.T.); +#229345 = ORIENTED_EDGE('',*,*,#229250,.T.); +#229346 = FACE_BOUND('',#229347,.F.); +#229347 = EDGE_LOOP('',(#229348)); +#229348 = ORIENTED_EDGE('',*,*,#229282,.T.); +#229349 = FACE_BOUND('',#229350,.F.); +#229350 = EDGE_LOOP('',(#229351)); +#229351 = ORIENTED_EDGE('',*,*,#229315,.T.); +#229352 = PLANE('',#229353); +#229353 = AXIS2_PLACEMENT_3D('',#229354,#229355,#229356); +#229354 = CARTESIAN_POINT('',(0.,0.,0.)); +#229355 = DIRECTION('',(-0.,-0.,-1.)); +#229356 = DIRECTION('',(-1.,0.,0.)); +#229357 = ADVANCED_FACE('',(#229358,#229377,#229380),#229383,.T.); +#229358 = FACE_BOUND('',#229359,.T.); +#229359 = EDGE_LOOP('',(#229360,#229361,#229362,#229363,#229364,#229365, + #229366,#229367,#229368,#229369,#229370,#229371,#229372,#229373, + #229374,#229375,#229376)); +#229360 = ORIENTED_EDGE('',*,*,#228743,.T.); +#229361 = ORIENTED_EDGE('',*,*,#228774,.T.); +#229362 = ORIENTED_EDGE('',*,*,#228805,.T.); +#229363 = ORIENTED_EDGE('',*,*,#228836,.T.); +#229364 = ORIENTED_EDGE('',*,*,#228867,.T.); +#229365 = ORIENTED_EDGE('',*,*,#228898,.T.); +#229366 = ORIENTED_EDGE('',*,*,#228929,.T.); +#229367 = ORIENTED_EDGE('',*,*,#228960,.T.); +#229368 = ORIENTED_EDGE('',*,*,#228993,.T.); +#229369 = ORIENTED_EDGE('',*,*,#229024,.T.); +#229370 = ORIENTED_EDGE('',*,*,#229055,.T.); +#229371 = ORIENTED_EDGE('',*,*,#229086,.T.); +#229372 = ORIENTED_EDGE('',*,*,#229117,.T.); +#229373 = ORIENTED_EDGE('',*,*,#229148,.T.); +#229374 = ORIENTED_EDGE('',*,*,#229179,.T.); +#229375 = ORIENTED_EDGE('',*,*,#229210,.T.); +#229376 = ORIENTED_EDGE('',*,*,#229243,.T.); +#229377 = FACE_BOUND('',#229378,.T.); +#229378 = EDGE_LOOP('',(#229379)); +#229379 = ORIENTED_EDGE('',*,*,#229274,.T.); +#229380 = FACE_BOUND('',#229381,.T.); +#229381 = EDGE_LOOP('',(#229382)); +#229382 = ORIENTED_EDGE('',*,*,#229307,.T.); +#229383 = PLANE('',#229384); +#229384 = AXIS2_PLACEMENT_3D('',#229385,#229386,#229387); +#229385 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#229386 = DIRECTION('',(-0.,-0.,-1.)); +#229387 = DIRECTION('',(-1.,0.,0.)); +#229388 = MANIFOLD_SOLID_BREP('',#229389); +#229389 = CLOSED_SHELL('',(#229390,#229432,#229463,#229494,#229525, + #229556,#229587,#229618,#229649,#229680,#229711,#229742,#229773, + #229804,#229835,#229866,#229897,#229928,#229959,#229990,#230021, + #230052,#230083,#230114,#230145,#230176,#230207,#230238,#230269, + #230300,#230331,#230362,#230395,#230426,#230457,#230488,#230519, + #230550,#230581,#230612,#230643,#230674,#230705,#230736,#230767, + #230798,#230829,#230860,#230882,#230938)); +#229390 = ADVANCED_FACE('',(#229391),#229427,.T.); +#229391 = FACE_BOUND('',#229392,.T.); +#229392 = EDGE_LOOP('',(#229393,#229403,#229412,#229420)); +#229393 = ORIENTED_EDGE('',*,*,#229394,.T.); +#229394 = EDGE_CURVE('',#229395,#229397,#229399,.T.); +#229395 = VERTEX_POINT('',#229396); +#229396 = CARTESIAN_POINT('',(137.309443,-82.326853,1.51)); +#229397 = VERTEX_POINT('',#229398); +#229398 = CARTESIAN_POINT('',(137.309443,-82.326853,1.545)); +#229399 = LINE('',#229400,#229401); +#229400 = CARTESIAN_POINT('',(137.309443,-82.326853,1.51)); +#229401 = VECTOR('',#229402,1.); +#229402 = DIRECTION('',(0.,0.,1.)); +#229403 = ORIENTED_EDGE('',*,*,#229404,.T.); +#229404 = EDGE_CURVE('',#229397,#229405,#229407,.T.); +#229405 = VERTEX_POINT('',#229406); +#229406 = CARTESIAN_POINT('',(137.463079,-82.390491,1.545)); +#229407 = CIRCLE('',#229408,0.100000590676); +#229408 = AXIS2_PLACEMENT_3D('',#229409,#229410,#229411); +#229409 = CARTESIAN_POINT('',(137.365,-82.41000068719,1.545)); +#229410 = DIRECTION('',(0.,0.,-1.)); +#229411 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#229412 = ORIENTED_EDGE('',*,*,#229413,.F.); +#229413 = EDGE_CURVE('',#229414,#229405,#229416,.T.); +#229414 = VERTEX_POINT('',#229415); +#229415 = CARTESIAN_POINT('',(137.463079,-82.390491,1.51)); +#229416 = LINE('',#229417,#229418); +#229417 = CARTESIAN_POINT('',(137.463079,-82.390491,1.51)); +#229418 = VECTOR('',#229419,1.); +#229419 = DIRECTION('',(0.,0.,1.)); +#229420 = ORIENTED_EDGE('',*,*,#229421,.F.); +#229421 = EDGE_CURVE('',#229395,#229414,#229422,.T.); +#229422 = CIRCLE('',#229423,0.100000590676); +#229423 = AXIS2_PLACEMENT_3D('',#229424,#229425,#229426); +#229424 = CARTESIAN_POINT('',(137.365,-82.41000068719,1.51)); +#229425 = DIRECTION('',(0.,0.,-1.)); +#229426 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#229427 = CYLINDRICAL_SURFACE('',#229428,0.100000590676); +#229428 = AXIS2_PLACEMENT_3D('',#229429,#229430,#229431); +#229429 = CARTESIAN_POINT('',(137.365,-82.41000068719,1.51)); +#229430 = DIRECTION('',(0.,0.,-1.)); +#229431 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#229432 = ADVANCED_FACE('',(#229433),#229458,.T.); +#229433 = FACE_BOUND('',#229434,.T.); +#229434 = EDGE_LOOP('',(#229435,#229436,#229444,#229452)); +#229435 = ORIENTED_EDGE('',*,*,#229413,.T.); +#229436 = ORIENTED_EDGE('',*,*,#229437,.T.); +#229437 = EDGE_CURVE('',#229405,#229438,#229440,.T.); +#229438 = VERTEX_POINT('',#229439); +#229439 = CARTESIAN_POINT('',(137.463079,-83.379509,1.545)); +#229440 = LINE('',#229441,#229442); +#229441 = CARTESIAN_POINT('',(137.463079,-82.390491,1.545)); +#229442 = VECTOR('',#229443,1.); +#229443 = DIRECTION('',(0.,-1.,0.)); +#229444 = ORIENTED_EDGE('',*,*,#229445,.F.); +#229445 = EDGE_CURVE('',#229446,#229438,#229448,.T.); +#229446 = VERTEX_POINT('',#229447); +#229447 = CARTESIAN_POINT('',(137.463079,-83.379509,1.51)); +#229448 = LINE('',#229449,#229450); +#229449 = CARTESIAN_POINT('',(137.463079,-83.379509,1.51)); +#229450 = VECTOR('',#229451,1.); +#229451 = DIRECTION('',(0.,0.,1.)); +#229452 = ORIENTED_EDGE('',*,*,#229453,.F.); +#229453 = EDGE_CURVE('',#229414,#229446,#229454,.T.); +#229454 = LINE('',#229455,#229456); +#229455 = CARTESIAN_POINT('',(137.463079,-82.390491,1.51)); +#229456 = VECTOR('',#229457,1.); +#229457 = DIRECTION('',(0.,-1.,0.)); +#229458 = PLANE('',#229459); +#229459 = AXIS2_PLACEMENT_3D('',#229460,#229461,#229462); +#229460 = CARTESIAN_POINT('',(137.463079,-82.390491,1.51)); +#229461 = DIRECTION('',(1.,0.,-0.)); +#229462 = DIRECTION('',(0.,-1.,0.)); +#229463 = ADVANCED_FACE('',(#229464),#229489,.T.); +#229464 = FACE_BOUND('',#229465,.T.); +#229465 = EDGE_LOOP('',(#229466,#229467,#229475,#229483)); +#229466 = ORIENTED_EDGE('',*,*,#229445,.T.); +#229467 = ORIENTED_EDGE('',*,*,#229468,.T.); +#229468 = EDGE_CURVE('',#229438,#229469,#229471,.T.); +#229469 = VERTEX_POINT('',#229470); +#229470 = CARTESIAN_POINT('',(137.448148,-83.415557,1.545)); +#229471 = LINE('',#229472,#229473); +#229472 = CARTESIAN_POINT('',(137.463079,-83.379509,1.545)); +#229473 = VECTOR('',#229474,1.); +#229474 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#229475 = ORIENTED_EDGE('',*,*,#229476,.F.); +#229476 = EDGE_CURVE('',#229477,#229469,#229479,.T.); +#229477 = VERTEX_POINT('',#229478); +#229478 = CARTESIAN_POINT('',(137.448148,-83.415557,1.51)); +#229479 = LINE('',#229480,#229481); +#229480 = CARTESIAN_POINT('',(137.448148,-83.415557,1.51)); +#229481 = VECTOR('',#229482,1.); +#229482 = DIRECTION('',(0.,0.,1.)); +#229483 = ORIENTED_EDGE('',*,*,#229484,.F.); +#229484 = EDGE_CURVE('',#229446,#229477,#229485,.T.); +#229485 = LINE('',#229486,#229487); +#229486 = CARTESIAN_POINT('',(137.463079,-83.379509,1.51)); +#229487 = VECTOR('',#229488,1.); +#229488 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#229489 = PLANE('',#229490); +#229490 = AXIS2_PLACEMENT_3D('',#229491,#229492,#229493); +#229491 = CARTESIAN_POINT('',(137.463079,-83.379509,1.51)); +#229492 = DIRECTION('',(0.923884701879,-0.382670952168,0.)); +#229493 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#229494 = ADVANCED_FACE('',(#229495),#229520,.T.); +#229495 = FACE_BOUND('',#229496,.T.); +#229496 = EDGE_LOOP('',(#229497,#229498,#229506,#229514)); +#229497 = ORIENTED_EDGE('',*,*,#229476,.T.); +#229498 = ORIENTED_EDGE('',*,*,#229499,.T.); +#229499 = EDGE_CURVE('',#229469,#229500,#229502,.T.); +#229500 = VERTEX_POINT('',#229501); +#229501 = CARTESIAN_POINT('',(137.080557,-83.783147,1.545)); +#229502 = LINE('',#229503,#229504); +#229503 = CARTESIAN_POINT('',(137.448148,-83.415557,1.545)); +#229504 = VECTOR('',#229505,1.); +#229505 = DIRECTION('',(-0.707107742999,-0.707105819373,0.)); +#229506 = ORIENTED_EDGE('',*,*,#229507,.F.); +#229507 = EDGE_CURVE('',#229508,#229500,#229510,.T.); +#229508 = VERTEX_POINT('',#229509); +#229509 = CARTESIAN_POINT('',(137.080557,-83.783147,1.51)); +#229510 = LINE('',#229511,#229512); +#229511 = CARTESIAN_POINT('',(137.080557,-83.783147,1.51)); +#229512 = VECTOR('',#229513,1.); +#229513 = DIRECTION('',(0.,0.,1.)); +#229514 = ORIENTED_EDGE('',*,*,#229515,.F.); +#229515 = EDGE_CURVE('',#229477,#229508,#229516,.T.); +#229516 = LINE('',#229517,#229518); +#229517 = CARTESIAN_POINT('',(137.448148,-83.415557,1.51)); +#229518 = VECTOR('',#229519,1.); +#229519 = DIRECTION('',(-0.707107742999,-0.707105819373,0.)); +#229520 = PLANE('',#229521); +#229521 = AXIS2_PLACEMENT_3D('',#229522,#229523,#229524); +#229522 = CARTESIAN_POINT('',(137.448148,-83.415557,1.51)); +#229523 = DIRECTION('',(0.707105819373,-0.707107742999,0.)); +#229524 = DIRECTION('',(-0.707107742999,-0.707105819373,0.)); +#229525 = ADVANCED_FACE('',(#229526),#229551,.T.); +#229526 = FACE_BOUND('',#229527,.T.); +#229527 = EDGE_LOOP('',(#229528,#229529,#229537,#229545)); +#229528 = ORIENTED_EDGE('',*,*,#229507,.T.); +#229529 = ORIENTED_EDGE('',*,*,#229530,.T.); +#229530 = EDGE_CURVE('',#229500,#229531,#229533,.T.); +#229531 = VERTEX_POINT('',#229532); +#229532 = CARTESIAN_POINT('',(137.044509,-83.798079,1.545)); +#229533 = LINE('',#229534,#229535); +#229534 = CARTESIAN_POINT('',(137.080557,-83.783147,1.545)); +#229535 = VECTOR('',#229536,1.); +#229536 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229537 = ORIENTED_EDGE('',*,*,#229538,.F.); +#229538 = EDGE_CURVE('',#229539,#229531,#229541,.T.); +#229539 = VERTEX_POINT('',#229540); +#229540 = CARTESIAN_POINT('',(137.044509,-83.798079,1.51)); +#229541 = LINE('',#229542,#229543); +#229542 = CARTESIAN_POINT('',(137.044509,-83.798079,1.51)); +#229543 = VECTOR('',#229544,1.); +#229544 = DIRECTION('',(0.,0.,1.)); +#229545 = ORIENTED_EDGE('',*,*,#229546,.F.); +#229546 = EDGE_CURVE('',#229508,#229539,#229547,.T.); +#229547 = LINE('',#229548,#229549); +#229548 = CARTESIAN_POINT('',(137.080557,-83.783147,1.51)); +#229549 = VECTOR('',#229550,1.); +#229550 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229551 = PLANE('',#229552); +#229552 = AXIS2_PLACEMENT_3D('',#229553,#229554,#229555); +#229553 = CARTESIAN_POINT('',(137.080557,-83.783147,1.51)); +#229554 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229555 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229556 = ADVANCED_FACE('',(#229557),#229582,.T.); +#229557 = FACE_BOUND('',#229558,.T.); +#229558 = EDGE_LOOP('',(#229559,#229560,#229568,#229576)); +#229559 = ORIENTED_EDGE('',*,*,#229538,.T.); +#229560 = ORIENTED_EDGE('',*,*,#229561,.T.); +#229561 = EDGE_CURVE('',#229531,#229562,#229564,.T.); +#229562 = VERTEX_POINT('',#229563); +#229563 = CARTESIAN_POINT('',(135.942107,-83.8,1.545)); +#229564 = LINE('',#229565,#229566); +#229565 = CARTESIAN_POINT('',(137.044509,-83.798079,1.545)); +#229566 = VECTOR('',#229567,1.); +#229567 = DIRECTION('',(-0.999998481748,-1.742555876563E-03,0.)); +#229568 = ORIENTED_EDGE('',*,*,#229569,.F.); +#229569 = EDGE_CURVE('',#229570,#229562,#229572,.T.); +#229570 = VERTEX_POINT('',#229571); +#229571 = CARTESIAN_POINT('',(135.942107,-83.8,1.51)); +#229572 = LINE('',#229573,#229574); +#229573 = CARTESIAN_POINT('',(135.942107,-83.8,1.51)); +#229574 = VECTOR('',#229575,1.); +#229575 = DIRECTION('',(0.,0.,1.)); +#229576 = ORIENTED_EDGE('',*,*,#229577,.F.); +#229577 = EDGE_CURVE('',#229539,#229570,#229578,.T.); +#229578 = LINE('',#229579,#229580); +#229579 = CARTESIAN_POINT('',(137.044509,-83.798079,1.51)); +#229580 = VECTOR('',#229581,1.); +#229581 = DIRECTION('',(-0.999998481748,-1.742555876563E-03,0.)); +#229582 = PLANE('',#229583); +#229583 = AXIS2_PLACEMENT_3D('',#229584,#229585,#229586); +#229584 = CARTESIAN_POINT('',(137.044509,-83.798079,1.51)); +#229585 = DIRECTION('',(1.742555876563E-03,-0.999998481748,0.)); +#229586 = DIRECTION('',(-0.999998481748,-1.742555876563E-03,0.)); +#229587 = ADVANCED_FACE('',(#229588),#229613,.T.); +#229588 = FACE_BOUND('',#229589,.T.); +#229589 = EDGE_LOOP('',(#229590,#229591,#229599,#229607)); +#229590 = ORIENTED_EDGE('',*,*,#229569,.T.); +#229591 = ORIENTED_EDGE('',*,*,#229592,.T.); +#229592 = EDGE_CURVE('',#229562,#229593,#229595,.T.); +#229593 = VERTEX_POINT('',#229594); +#229594 = CARTESIAN_POINT('',(135.796242,-83.943147,1.545)); +#229595 = LINE('',#229596,#229597); +#229596 = CARTESIAN_POINT('',(135.942107,-83.8,1.545)); +#229597 = VECTOR('',#229598,1.); +#229598 = DIRECTION('',(-0.71372517267,-0.700425854675,0.)); +#229599 = ORIENTED_EDGE('',*,*,#229600,.F.); +#229600 = EDGE_CURVE('',#229601,#229593,#229603,.T.); +#229601 = VERTEX_POINT('',#229602); +#229602 = CARTESIAN_POINT('',(135.796242,-83.943147,1.51)); +#229603 = LINE('',#229604,#229605); +#229604 = CARTESIAN_POINT('',(135.796242,-83.943147,1.51)); +#229605 = VECTOR('',#229606,1.); +#229606 = DIRECTION('',(0.,0.,1.)); +#229607 = ORIENTED_EDGE('',*,*,#229608,.F.); +#229608 = EDGE_CURVE('',#229570,#229601,#229609,.T.); +#229609 = LINE('',#229610,#229611); +#229610 = CARTESIAN_POINT('',(135.942107,-83.8,1.51)); +#229611 = VECTOR('',#229612,1.); +#229612 = DIRECTION('',(-0.71372517267,-0.700425854675,0.)); +#229613 = PLANE('',#229614); +#229614 = AXIS2_PLACEMENT_3D('',#229615,#229616,#229617); +#229615 = CARTESIAN_POINT('',(135.942107,-83.8,1.51)); +#229616 = DIRECTION('',(0.700425854675,-0.71372517267,0.)); +#229617 = DIRECTION('',(-0.71372517267,-0.700425854675,0.)); +#229618 = ADVANCED_FACE('',(#229619),#229644,.T.); +#229619 = FACE_BOUND('',#229620,.T.); +#229620 = EDGE_LOOP('',(#229621,#229622,#229630,#229638)); +#229621 = ORIENTED_EDGE('',*,*,#229600,.T.); +#229622 = ORIENTED_EDGE('',*,*,#229623,.T.); +#229623 = EDGE_CURVE('',#229593,#229624,#229626,.T.); +#229624 = VERTEX_POINT('',#229625); +#229625 = CARTESIAN_POINT('',(135.760194,-83.958079,1.545)); +#229626 = LINE('',#229627,#229628); +#229627 = CARTESIAN_POINT('',(135.796242,-83.943147,1.545)); +#229628 = VECTOR('',#229629,1.); +#229629 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229630 = ORIENTED_EDGE('',*,*,#229631,.F.); +#229631 = EDGE_CURVE('',#229632,#229624,#229634,.T.); +#229632 = VERTEX_POINT('',#229633); +#229633 = CARTESIAN_POINT('',(135.760194,-83.958079,1.51)); +#229634 = LINE('',#229635,#229636); +#229635 = CARTESIAN_POINT('',(135.760194,-83.958079,1.51)); +#229636 = VECTOR('',#229637,1.); +#229637 = DIRECTION('',(0.,0.,1.)); +#229638 = ORIENTED_EDGE('',*,*,#229639,.F.); +#229639 = EDGE_CURVE('',#229601,#229632,#229640,.T.); +#229640 = LINE('',#229641,#229642); +#229641 = CARTESIAN_POINT('',(135.796242,-83.943147,1.51)); +#229642 = VECTOR('',#229643,1.); +#229643 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229644 = PLANE('',#229645); +#229645 = AXIS2_PLACEMENT_3D('',#229646,#229647,#229648); +#229646 = CARTESIAN_POINT('',(135.796242,-83.943147,1.51)); +#229647 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229648 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229649 = ADVANCED_FACE('',(#229650),#229675,.T.); +#229650 = FACE_BOUND('',#229651,.T.); +#229651 = EDGE_LOOP('',(#229652,#229653,#229661,#229669)); +#229652 = ORIENTED_EDGE('',*,*,#229631,.T.); +#229653 = ORIENTED_EDGE('',*,*,#229654,.T.); +#229654 = EDGE_CURVE('',#229624,#229655,#229657,.T.); +#229655 = VERTEX_POINT('',#229656); +#229656 = CARTESIAN_POINT('',(135.07779,-83.96,1.545)); +#229657 = LINE('',#229658,#229659); +#229658 = CARTESIAN_POINT('',(135.760194,-83.958079,1.545)); +#229659 = VECTOR('',#229660,1.); +#229660 = DIRECTION('',(-0.999996037776,-2.815036823588E-03,0.)); +#229661 = ORIENTED_EDGE('',*,*,#229662,.F.); +#229662 = EDGE_CURVE('',#229663,#229655,#229665,.T.); +#229663 = VERTEX_POINT('',#229664); +#229664 = CARTESIAN_POINT('',(135.07779,-83.96,1.51)); +#229665 = LINE('',#229666,#229667); +#229666 = CARTESIAN_POINT('',(135.07779,-83.96,1.51)); +#229667 = VECTOR('',#229668,1.); +#229668 = DIRECTION('',(0.,0.,1.)); +#229669 = ORIENTED_EDGE('',*,*,#229670,.F.); +#229670 = EDGE_CURVE('',#229632,#229663,#229671,.T.); +#229671 = LINE('',#229672,#229673); +#229672 = CARTESIAN_POINT('',(135.760194,-83.958079,1.51)); +#229673 = VECTOR('',#229674,1.); +#229674 = DIRECTION('',(-0.999996037776,-2.815036823588E-03,0.)); +#229675 = PLANE('',#229676); +#229676 = AXIS2_PLACEMENT_3D('',#229677,#229678,#229679); +#229677 = CARTESIAN_POINT('',(135.760194,-83.958079,1.51)); +#229678 = DIRECTION('',(2.815036823588E-03,-0.999996037776,0.)); +#229679 = DIRECTION('',(-0.999996037776,-2.815036823588E-03,0.)); +#229680 = ADVANCED_FACE('',(#229681),#229706,.T.); +#229681 = FACE_BOUND('',#229682,.T.); +#229682 = EDGE_LOOP('',(#229683,#229684,#229692,#229700)); +#229683 = ORIENTED_EDGE('',*,*,#229662,.T.); +#229684 = ORIENTED_EDGE('',*,*,#229685,.T.); +#229685 = EDGE_CURVE('',#229655,#229686,#229688,.T.); +#229686 = VERTEX_POINT('',#229687); +#229687 = CARTESIAN_POINT('',(134.691927,-84.343147,1.545)); +#229688 = LINE('',#229689,#229690); +#229689 = CARTESIAN_POINT('',(135.07779,-83.96,1.545)); +#229690 = VECTOR('',#229691,1.); +#229691 = DIRECTION('',(-0.709599724899,-0.704605017314,0.)); +#229692 = ORIENTED_EDGE('',*,*,#229693,.F.); +#229693 = EDGE_CURVE('',#229694,#229686,#229696,.T.); +#229694 = VERTEX_POINT('',#229695); +#229695 = CARTESIAN_POINT('',(134.691927,-84.343147,1.51)); +#229696 = LINE('',#229697,#229698); +#229697 = CARTESIAN_POINT('',(134.691927,-84.343147,1.51)); +#229698 = VECTOR('',#229699,1.); +#229699 = DIRECTION('',(0.,0.,1.)); +#229700 = ORIENTED_EDGE('',*,*,#229701,.F.); +#229701 = EDGE_CURVE('',#229663,#229694,#229702,.T.); +#229702 = LINE('',#229703,#229704); +#229703 = CARTESIAN_POINT('',(135.07779,-83.96,1.51)); +#229704 = VECTOR('',#229705,1.); +#229705 = DIRECTION('',(-0.709599724899,-0.704605017314,0.)); +#229706 = PLANE('',#229707); +#229707 = AXIS2_PLACEMENT_3D('',#229708,#229709,#229710); +#229708 = CARTESIAN_POINT('',(135.07779,-83.96,1.51)); +#229709 = DIRECTION('',(0.704605017314,-0.709599724899,0.)); +#229710 = DIRECTION('',(-0.709599724899,-0.704605017314,0.)); +#229711 = ADVANCED_FACE('',(#229712),#229737,.T.); +#229712 = FACE_BOUND('',#229713,.T.); +#229713 = EDGE_LOOP('',(#229714,#229715,#229723,#229731)); +#229714 = ORIENTED_EDGE('',*,*,#229693,.T.); +#229715 = ORIENTED_EDGE('',*,*,#229716,.T.); +#229716 = EDGE_CURVE('',#229686,#229717,#229719,.T.); +#229717 = VERTEX_POINT('',#229718); +#229718 = CARTESIAN_POINT('',(134.655879,-84.358079,1.545)); +#229719 = LINE('',#229720,#229721); +#229720 = CARTESIAN_POINT('',(134.691927,-84.343147,1.545)); +#229721 = VECTOR('',#229722,1.); +#229722 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229723 = ORIENTED_EDGE('',*,*,#229724,.F.); +#229724 = EDGE_CURVE('',#229725,#229717,#229727,.T.); +#229725 = VERTEX_POINT('',#229726); +#229726 = CARTESIAN_POINT('',(134.655879,-84.358079,1.51)); +#229727 = LINE('',#229728,#229729); +#229728 = CARTESIAN_POINT('',(134.655879,-84.358079,1.51)); +#229729 = VECTOR('',#229730,1.); +#229730 = DIRECTION('',(0.,0.,1.)); +#229731 = ORIENTED_EDGE('',*,*,#229732,.F.); +#229732 = EDGE_CURVE('',#229694,#229725,#229733,.T.); +#229733 = LINE('',#229734,#229735); +#229734 = CARTESIAN_POINT('',(134.691927,-84.343147,1.51)); +#229735 = VECTOR('',#229736,1.); +#229736 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229737 = PLANE('',#229738); +#229738 = AXIS2_PLACEMENT_3D('',#229739,#229740,#229741); +#229739 = CARTESIAN_POINT('',(134.691927,-84.343147,1.51)); +#229740 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229741 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#229742 = ADVANCED_FACE('',(#229743),#229768,.T.); +#229743 = FACE_BOUND('',#229744,.T.); +#229744 = EDGE_LOOP('',(#229745,#229746,#229754,#229762)); +#229745 = ORIENTED_EDGE('',*,*,#229724,.T.); +#229746 = ORIENTED_EDGE('',*,*,#229747,.T.); +#229747 = EDGE_CURVE('',#229717,#229748,#229750,.T.); +#229748 = VERTEX_POINT('',#229749); +#229749 = CARTESIAN_POINT('',(134.215736,-84.36,1.545)); +#229750 = LINE('',#229751,#229752); +#229751 = CARTESIAN_POINT('',(134.655879,-84.358079,1.545)); +#229752 = VECTOR('',#229753,1.); +#229753 = DIRECTION('',(-0.999990475747,-4.364449062931E-03,0.)); +#229754 = ORIENTED_EDGE('',*,*,#229755,.F.); +#229755 = EDGE_CURVE('',#229756,#229748,#229758,.T.); +#229756 = VERTEX_POINT('',#229757); +#229757 = CARTESIAN_POINT('',(134.215736,-84.36,1.51)); +#229758 = LINE('',#229759,#229760); +#229759 = CARTESIAN_POINT('',(134.215736,-84.36,1.51)); +#229760 = VECTOR('',#229761,1.); +#229761 = DIRECTION('',(0.,0.,1.)); +#229762 = ORIENTED_EDGE('',*,*,#229763,.F.); +#229763 = EDGE_CURVE('',#229725,#229756,#229764,.T.); +#229764 = LINE('',#229765,#229766); +#229765 = CARTESIAN_POINT('',(134.655879,-84.358079,1.51)); +#229766 = VECTOR('',#229767,1.); +#229767 = DIRECTION('',(-0.999990475747,-4.364449062931E-03,0.)); +#229768 = PLANE('',#229769); +#229769 = AXIS2_PLACEMENT_3D('',#229770,#229771,#229772); +#229770 = CARTESIAN_POINT('',(134.655879,-84.358079,1.51)); +#229771 = DIRECTION('',(4.364449062931E-03,-0.999990475747,0.)); +#229772 = DIRECTION('',(-0.999990475747,-4.364449062931E-03,0.)); +#229773 = ADVANCED_FACE('',(#229774),#229799,.T.); +#229774 = FACE_BOUND('',#229775,.T.); +#229775 = EDGE_LOOP('',(#229776,#229777,#229785,#229793)); +#229776 = ORIENTED_EDGE('',*,*,#229755,.T.); +#229777 = ORIENTED_EDGE('',*,*,#229778,.T.); +#229778 = EDGE_CURVE('',#229748,#229779,#229781,.T.); +#229779 = VERTEX_POINT('',#229780); +#229780 = CARTESIAN_POINT('',(132.157108,-86.418628,1.545)); +#229781 = LINE('',#229782,#229783); +#229782 = CARTESIAN_POINT('',(134.215736,-84.36,1.545)); +#229783 = VECTOR('',#229784,1.); +#229784 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#229785 = ORIENTED_EDGE('',*,*,#229786,.F.); +#229786 = EDGE_CURVE('',#229787,#229779,#229789,.T.); +#229787 = VERTEX_POINT('',#229788); +#229788 = CARTESIAN_POINT('',(132.157108,-86.418628,1.51)); +#229789 = LINE('',#229790,#229791); +#229790 = CARTESIAN_POINT('',(132.157108,-86.418628,1.51)); +#229791 = VECTOR('',#229792,1.); +#229792 = DIRECTION('',(0.,0.,1.)); +#229793 = ORIENTED_EDGE('',*,*,#229794,.F.); +#229794 = EDGE_CURVE('',#229756,#229787,#229795,.T.); +#229795 = LINE('',#229796,#229797); +#229796 = CARTESIAN_POINT('',(134.215736,-84.36,1.51)); +#229797 = VECTOR('',#229798,1.); +#229798 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#229799 = PLANE('',#229800); +#229800 = AXIS2_PLACEMENT_3D('',#229801,#229802,#229803); +#229801 = CARTESIAN_POINT('',(134.215736,-84.36,1.51)); +#229802 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#229803 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#229804 = ADVANCED_FACE('',(#229805),#229830,.T.); +#229805 = FACE_BOUND('',#229806,.T.); +#229806 = EDGE_LOOP('',(#229807,#229808,#229816,#229824)); +#229807 = ORIENTED_EDGE('',*,*,#229786,.T.); +#229808 = ORIENTED_EDGE('',*,*,#229809,.T.); +#229809 = EDGE_CURVE('',#229779,#229810,#229812,.T.); +#229810 = VERTEX_POINT('',#229811); +#229811 = CARTESIAN_POINT('',(132.155187,-86.462402,1.545)); +#229812 = LINE('',#229813,#229814); +#229813 = CARTESIAN_POINT('',(132.157108,-86.418628,1.545)); +#229814 = VECTOR('',#229815,1.); +#229815 = DIRECTION('',(-4.384230112403E-02,-0.99903846404,0.)); +#229816 = ORIENTED_EDGE('',*,*,#229817,.F.); +#229817 = EDGE_CURVE('',#229818,#229810,#229820,.T.); +#229818 = VERTEX_POINT('',#229819); +#229819 = CARTESIAN_POINT('',(132.155187,-86.462402,1.51)); +#229820 = LINE('',#229821,#229822); +#229821 = CARTESIAN_POINT('',(132.155187,-86.462402,1.51)); +#229822 = VECTOR('',#229823,1.); +#229823 = DIRECTION('',(0.,0.,1.)); +#229824 = ORIENTED_EDGE('',*,*,#229825,.F.); +#229825 = EDGE_CURVE('',#229787,#229818,#229826,.T.); +#229826 = LINE('',#229827,#229828); +#229827 = CARTESIAN_POINT('',(132.157108,-86.418628,1.51)); +#229828 = VECTOR('',#229829,1.); +#229829 = DIRECTION('',(-4.384230112403E-02,-0.99903846404,0.)); +#229830 = PLANE('',#229831); +#229831 = AXIS2_PLACEMENT_3D('',#229832,#229833,#229834); +#229832 = CARTESIAN_POINT('',(132.157108,-86.418628,1.51)); +#229833 = DIRECTION('',(0.99903846404,-4.384230112403E-02,0.)); +#229834 = DIRECTION('',(-4.384230112403E-02,-0.99903846404,0.)); +#229835 = ADVANCED_FACE('',(#229836),#229861,.T.); +#229836 = FACE_BOUND('',#229837,.T.); +#229837 = EDGE_LOOP('',(#229838,#229839,#229847,#229855)); +#229838 = ORIENTED_EDGE('',*,*,#229817,.T.); +#229839 = ORIENTED_EDGE('',*,*,#229840,.T.); +#229840 = EDGE_CURVE('',#229810,#229841,#229843,.T.); +#229841 = VERTEX_POINT('',#229842); +#229842 = CARTESIAN_POINT('',(132.140255,-86.498451,1.545)); +#229843 = LINE('',#229844,#229845); +#229844 = CARTESIAN_POINT('',(132.155187,-86.462402,1.545)); +#229845 = VECTOR('',#229846,1.); +#229846 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#229847 = ORIENTED_EDGE('',*,*,#229848,.F.); +#229848 = EDGE_CURVE('',#229849,#229841,#229851,.T.); +#229849 = VERTEX_POINT('',#229850); +#229850 = CARTESIAN_POINT('',(132.140255,-86.498451,1.51)); +#229851 = LINE('',#229852,#229853); +#229852 = CARTESIAN_POINT('',(132.140255,-86.498451,1.51)); +#229853 = VECTOR('',#229854,1.); +#229854 = DIRECTION('',(0.,0.,1.)); +#229855 = ORIENTED_EDGE('',*,*,#229856,.F.); +#229856 = EDGE_CURVE('',#229818,#229849,#229857,.T.); +#229857 = LINE('',#229858,#229859); +#229858 = CARTESIAN_POINT('',(132.155187,-86.462402,1.51)); +#229859 = VECTOR('',#229860,1.); +#229860 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#229861 = PLANE('',#229862); +#229862 = AXIS2_PLACEMENT_3D('',#229863,#229864,#229865); +#229863 = CARTESIAN_POINT('',(132.155187,-86.462402,1.51)); +#229864 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#229865 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#229866 = ADVANCED_FACE('',(#229867),#229892,.T.); +#229867 = FACE_BOUND('',#229868,.T.); +#229868 = EDGE_LOOP('',(#229869,#229870,#229878,#229886)); +#229869 = ORIENTED_EDGE('',*,*,#229848,.T.); +#229870 = ORIENTED_EDGE('',*,*,#229871,.T.); +#229871 = EDGE_CURVE('',#229841,#229872,#229874,.T.); +#229872 = VERTEX_POINT('',#229873); +#229873 = CARTESIAN_POINT('',(132.065686,-86.575735,1.545)); +#229874 = LINE('',#229875,#229876); +#229875 = CARTESIAN_POINT('',(132.140255,-86.498451,1.545)); +#229876 = VECTOR('',#229877,1.); +#229877 = DIRECTION('',(-0.694353354114,-0.719634226278,0.)); +#229878 = ORIENTED_EDGE('',*,*,#229879,.F.); +#229879 = EDGE_CURVE('',#229880,#229872,#229882,.T.); +#229880 = VERTEX_POINT('',#229881); +#229881 = CARTESIAN_POINT('',(132.065686,-86.575735,1.51)); +#229882 = LINE('',#229883,#229884); +#229883 = CARTESIAN_POINT('',(132.065686,-86.575735,1.51)); +#229884 = VECTOR('',#229885,1.); +#229885 = DIRECTION('',(0.,0.,1.)); +#229886 = ORIENTED_EDGE('',*,*,#229887,.F.); +#229887 = EDGE_CURVE('',#229849,#229880,#229888,.T.); +#229888 = LINE('',#229889,#229890); +#229889 = CARTESIAN_POINT('',(132.140255,-86.498451,1.51)); +#229890 = VECTOR('',#229891,1.); +#229891 = DIRECTION('',(-0.694353354114,-0.719634226278,0.)); +#229892 = PLANE('',#229893); +#229893 = AXIS2_PLACEMENT_3D('',#229894,#229895,#229896); +#229894 = CARTESIAN_POINT('',(132.140255,-86.498451,1.51)); +#229895 = DIRECTION('',(0.719634226278,-0.694353354114,0.)); +#229896 = DIRECTION('',(-0.694353354114,-0.719634226278,0.)); +#229897 = ADVANCED_FACE('',(#229898),#229923,.T.); +#229898 = FACE_BOUND('',#229899,.T.); +#229899 = EDGE_LOOP('',(#229900,#229901,#229909,#229917)); +#229900 = ORIENTED_EDGE('',*,*,#229879,.T.); +#229901 = ORIENTED_EDGE('',*,*,#229902,.T.); +#229902 = EDGE_CURVE('',#229872,#229903,#229905,.T.); +#229903 = VERTEX_POINT('',#229904); +#229904 = CARTESIAN_POINT('',(137.130064,-91.642831,1.545)); +#229905 = LINE('',#229906,#229907); +#229906 = CARTESIAN_POINT('',(132.065686,-86.575735,1.545)); +#229907 = VECTOR('',#229908,1.); +#229908 = DIRECTION('',(0.706917058155,-0.707296453327,0.)); +#229909 = ORIENTED_EDGE('',*,*,#229910,.F.); +#229910 = EDGE_CURVE('',#229911,#229903,#229913,.T.); +#229911 = VERTEX_POINT('',#229912); +#229912 = CARTESIAN_POINT('',(137.130064,-91.642831,1.51)); +#229913 = LINE('',#229914,#229915); +#229914 = CARTESIAN_POINT('',(137.130064,-91.642831,1.51)); +#229915 = VECTOR('',#229916,1.); +#229916 = DIRECTION('',(0.,0.,1.)); +#229917 = ORIENTED_EDGE('',*,*,#229918,.F.); +#229918 = EDGE_CURVE('',#229880,#229911,#229919,.T.); +#229919 = LINE('',#229920,#229921); +#229920 = CARTESIAN_POINT('',(132.065686,-86.575735,1.51)); +#229921 = VECTOR('',#229922,1.); +#229922 = DIRECTION('',(0.706917058155,-0.707296453327,0.)); +#229923 = PLANE('',#229924); +#229924 = AXIS2_PLACEMENT_3D('',#229925,#229926,#229927); +#229925 = CARTESIAN_POINT('',(132.065686,-86.575735,1.51)); +#229926 = DIRECTION('',(0.707296453327,0.706917058155,-0.)); +#229927 = DIRECTION('',(0.706917058155,-0.707296453327,0.)); +#229928 = ADVANCED_FACE('',(#229929),#229954,.T.); +#229929 = FACE_BOUND('',#229930,.T.); +#229930 = EDGE_LOOP('',(#229931,#229932,#229940,#229948)); +#229931 = ORIENTED_EDGE('',*,*,#229910,.T.); +#229932 = ORIENTED_EDGE('',*,*,#229933,.T.); +#229933 = EDGE_CURVE('',#229903,#229934,#229936,.T.); +#229934 = VERTEX_POINT('',#229935); +#229935 = CARTESIAN_POINT('',(137.144996,-91.678879,1.545)); +#229936 = LINE('',#229937,#229938); +#229937 = CARTESIAN_POINT('',(137.130064,-91.642831,1.545)); +#229938 = VECTOR('',#229939,1.); +#229939 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229940 = ORIENTED_EDGE('',*,*,#229941,.F.); +#229941 = EDGE_CURVE('',#229942,#229934,#229944,.T.); +#229942 = VERTEX_POINT('',#229943); +#229943 = CARTESIAN_POINT('',(137.144996,-91.678879,1.51)); +#229944 = LINE('',#229945,#229946); +#229945 = CARTESIAN_POINT('',(137.144996,-91.678879,1.51)); +#229946 = VECTOR('',#229947,1.); +#229947 = DIRECTION('',(0.,0.,1.)); +#229948 = ORIENTED_EDGE('',*,*,#229949,.F.); +#229949 = EDGE_CURVE('',#229911,#229942,#229950,.T.); +#229950 = LINE('',#229951,#229952); +#229951 = CARTESIAN_POINT('',(137.130064,-91.642831,1.51)); +#229952 = VECTOR('',#229953,1.); +#229953 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229954 = PLANE('',#229955); +#229955 = AXIS2_PLACEMENT_3D('',#229956,#229957,#229958); +#229956 = CARTESIAN_POINT('',(137.130064,-91.642831,1.51)); +#229957 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#229958 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#229959 = ADVANCED_FACE('',(#229960),#229985,.T.); +#229960 = FACE_BOUND('',#229961,.T.); +#229961 = EDGE_LOOP('',(#229962,#229963,#229971,#229979)); +#229962 = ORIENTED_EDGE('',*,*,#229941,.T.); +#229963 = ORIENTED_EDGE('',*,*,#229964,.T.); +#229964 = EDGE_CURVE('',#229934,#229965,#229967,.T.); +#229965 = VERTEX_POINT('',#229966); +#229966 = CARTESIAN_POINT('',(137.144996,-116.71594,1.545)); +#229967 = LINE('',#229968,#229969); +#229968 = CARTESIAN_POINT('',(137.144996,-91.678879,1.545)); +#229969 = VECTOR('',#229970,1.); +#229970 = DIRECTION('',(0.,-1.,0.)); +#229971 = ORIENTED_EDGE('',*,*,#229972,.F.); +#229972 = EDGE_CURVE('',#229973,#229965,#229975,.T.); +#229973 = VERTEX_POINT('',#229974); +#229974 = CARTESIAN_POINT('',(137.144996,-116.71594,1.51)); +#229975 = LINE('',#229976,#229977); +#229976 = CARTESIAN_POINT('',(137.144996,-116.71594,1.51)); +#229977 = VECTOR('',#229978,1.); +#229978 = DIRECTION('',(0.,0.,1.)); +#229979 = ORIENTED_EDGE('',*,*,#229980,.F.); +#229980 = EDGE_CURVE('',#229942,#229973,#229981,.T.); +#229981 = LINE('',#229982,#229983); +#229982 = CARTESIAN_POINT('',(137.144996,-91.678879,1.51)); +#229983 = VECTOR('',#229984,1.); +#229984 = DIRECTION('',(0.,-1.,0.)); +#229985 = PLANE('',#229986); +#229986 = AXIS2_PLACEMENT_3D('',#229987,#229988,#229989); +#229987 = CARTESIAN_POINT('',(137.144996,-91.678879,1.51)); +#229988 = DIRECTION('',(1.,0.,-0.)); +#229989 = DIRECTION('',(0.,-1.,0.)); +#229990 = ADVANCED_FACE('',(#229991),#230016,.T.); +#229991 = FACE_BOUND('',#229992,.T.); +#229992 = EDGE_LOOP('',(#229993,#229994,#230002,#230010)); +#229993 = ORIENTED_EDGE('',*,*,#229972,.T.); +#229994 = ORIENTED_EDGE('',*,*,#229995,.T.); +#229995 = EDGE_CURVE('',#229965,#229996,#229998,.T.); +#229996 = VERTEX_POINT('',#229997); +#229997 = CARTESIAN_POINT('',(137.130064,-116.751989,1.545)); +#229998 = LINE('',#229999,#230000); +#229999 = CARTESIAN_POINT('',(137.144996,-116.71594,1.545)); +#230000 = VECTOR('',#230001,1.); +#230001 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#230002 = ORIENTED_EDGE('',*,*,#230003,.F.); +#230003 = EDGE_CURVE('',#230004,#229996,#230006,.T.); +#230004 = VERTEX_POINT('',#230005); +#230005 = CARTESIAN_POINT('',(137.130064,-116.751989,1.51)); +#230006 = LINE('',#230007,#230008); +#230007 = CARTESIAN_POINT('',(137.130064,-116.751989,1.51)); +#230008 = VECTOR('',#230009,1.); +#230009 = DIRECTION('',(0.,0.,1.)); +#230010 = ORIENTED_EDGE('',*,*,#230011,.F.); +#230011 = EDGE_CURVE('',#229973,#230004,#230012,.T.); +#230012 = LINE('',#230013,#230014); +#230013 = CARTESIAN_POINT('',(137.144996,-116.71594,1.51)); +#230014 = VECTOR('',#230015,1.); +#230015 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#230016 = PLANE('',#230017); +#230017 = AXIS2_PLACEMENT_3D('',#230018,#230019,#230020); +#230018 = CARTESIAN_POINT('',(137.144996,-116.71594,1.51)); +#230019 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#230020 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#230021 = ADVANCED_FACE('',(#230022),#230047,.T.); +#230022 = FACE_BOUND('',#230023,.T.); +#230023 = EDGE_LOOP('',(#230024,#230025,#230033,#230041)); +#230024 = ORIENTED_EDGE('',*,*,#230003,.T.); +#230025 = ORIENTED_EDGE('',*,*,#230026,.T.); +#230026 = EDGE_CURVE('',#229996,#230027,#230029,.T.); +#230027 = VERTEX_POINT('',#230028); +#230028 = CARTESIAN_POINT('',(136.1,-117.78477,1.545)); +#230029 = LINE('',#230030,#230031); +#230030 = CARTESIAN_POINT('',(137.130064,-116.751989,1.545)); +#230031 = VECTOR('',#230032,1.); +#230032 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#230033 = ORIENTED_EDGE('',*,*,#230034,.F.); +#230034 = EDGE_CURVE('',#230035,#230027,#230037,.T.); +#230035 = VERTEX_POINT('',#230036); +#230036 = CARTESIAN_POINT('',(136.1,-117.78477,1.51)); +#230037 = LINE('',#230038,#230039); +#230038 = CARTESIAN_POINT('',(136.1,-117.78477,1.51)); +#230039 = VECTOR('',#230040,1.); +#230040 = DIRECTION('',(0.,0.,1.)); +#230041 = ORIENTED_EDGE('',*,*,#230042,.F.); +#230042 = EDGE_CURVE('',#230004,#230035,#230043,.T.); +#230043 = LINE('',#230044,#230045); +#230044 = CARTESIAN_POINT('',(137.130064,-116.751989,1.51)); +#230045 = VECTOR('',#230046,1.); +#230046 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#230047 = PLANE('',#230048); +#230048 = AXIS2_PLACEMENT_3D('',#230049,#230050,#230051); +#230049 = CARTESIAN_POINT('',(137.130064,-116.751989,1.51)); +#230050 = DIRECTION('',(0.708037506585,-0.70617482911,0.)); +#230051 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#230052 = ADVANCED_FACE('',(#230053),#230078,.T.); +#230053 = FACE_BOUND('',#230054,.T.); +#230054 = EDGE_LOOP('',(#230055,#230056,#230064,#230072)); +#230055 = ORIENTED_EDGE('',*,*,#230034,.T.); +#230056 = ORIENTED_EDGE('',*,*,#230057,.T.); +#230057 = EDGE_CURVE('',#230027,#230058,#230060,.T.); +#230058 = VERTEX_POINT('',#230059); +#230059 = CARTESIAN_POINT('',(136.098168,-127.067091,1.545)); +#230060 = LINE('',#230061,#230062); +#230061 = CARTESIAN_POINT('',(136.1,-117.78477,1.545)); +#230062 = VECTOR('',#230063,1.); +#230063 = DIRECTION('',(-1.973644268849E-04,-0.999999980524,0.)); +#230064 = ORIENTED_EDGE('',*,*,#230065,.F.); +#230065 = EDGE_CURVE('',#230066,#230058,#230068,.T.); +#230066 = VERTEX_POINT('',#230067); +#230067 = CARTESIAN_POINT('',(136.098168,-127.067091,1.51)); +#230068 = LINE('',#230069,#230070); +#230069 = CARTESIAN_POINT('',(136.098168,-127.067091,1.51)); +#230070 = VECTOR('',#230071,1.); +#230071 = DIRECTION('',(0.,0.,1.)); +#230072 = ORIENTED_EDGE('',*,*,#230073,.F.); +#230073 = EDGE_CURVE('',#230035,#230066,#230074,.T.); +#230074 = LINE('',#230075,#230076); +#230075 = CARTESIAN_POINT('',(136.1,-117.78477,1.51)); +#230076 = VECTOR('',#230077,1.); +#230077 = DIRECTION('',(-1.973644268849E-04,-0.999999980524,0.)); +#230078 = PLANE('',#230079); +#230079 = AXIS2_PLACEMENT_3D('',#230080,#230081,#230082); +#230080 = CARTESIAN_POINT('',(136.1,-117.78477,1.51)); +#230081 = DIRECTION('',(0.999999980524,-1.973644268849E-04,0.)); +#230082 = DIRECTION('',(-1.973644268849E-04,-0.999999980524,0.)); +#230083 = ADVANCED_FACE('',(#230084),#230109,.T.); +#230084 = FACE_BOUND('',#230085,.T.); +#230085 = EDGE_LOOP('',(#230086,#230087,#230095,#230103)); +#230086 = ORIENTED_EDGE('',*,*,#230065,.T.); +#230087 = ORIENTED_EDGE('',*,*,#230088,.T.); +#230088 = EDGE_CURVE('',#230058,#230089,#230091,.T.); +#230089 = VERTEX_POINT('',#230090); +#230090 = CARTESIAN_POINT('',(136.057995,-127.056327,1.545)); +#230091 = LINE('',#230092,#230093); +#230092 = CARTESIAN_POINT('',(136.098168,-127.067091,1.545)); +#230093 = VECTOR('',#230094,1.); +#230094 = DIRECTION('',(-0.965927767275,0.258811801134,0.)); +#230095 = ORIENTED_EDGE('',*,*,#230096,.F.); +#230096 = EDGE_CURVE('',#230097,#230089,#230099,.T.); +#230097 = VERTEX_POINT('',#230098); +#230098 = CARTESIAN_POINT('',(136.057995,-127.056327,1.51)); +#230099 = LINE('',#230100,#230101); +#230100 = CARTESIAN_POINT('',(136.057995,-127.056327,1.51)); +#230101 = VECTOR('',#230102,1.); +#230102 = DIRECTION('',(0.,0.,1.)); +#230103 = ORIENTED_EDGE('',*,*,#230104,.F.); +#230104 = EDGE_CURVE('',#230066,#230097,#230105,.T.); +#230105 = LINE('',#230106,#230107); +#230106 = CARTESIAN_POINT('',(136.098168,-127.067091,1.51)); +#230107 = VECTOR('',#230108,1.); +#230108 = DIRECTION('',(-0.965927767275,0.258811801134,0.)); +#230109 = PLANE('',#230110); +#230110 = AXIS2_PLACEMENT_3D('',#230111,#230112,#230113); +#230111 = CARTESIAN_POINT('',(136.098168,-127.067091,1.51)); +#230112 = DIRECTION('',(-0.258811801134,-0.965927767275,0.)); +#230113 = DIRECTION('',(-0.965927767275,0.258811801134,0.)); +#230114 = ADVANCED_FACE('',(#230115),#230140,.T.); +#230115 = FACE_BOUND('',#230116,.T.); +#230116 = EDGE_LOOP('',(#230117,#230118,#230126,#230134)); +#230117 = ORIENTED_EDGE('',*,*,#230096,.T.); +#230118 = ORIENTED_EDGE('',*,*,#230119,.T.); +#230119 = EDGE_CURVE('',#230089,#230120,#230122,.T.); +#230120 = VERTEX_POINT('',#230121); +#230121 = CARTESIAN_POINT('',(136.,-127.052526,1.545)); +#230122 = LINE('',#230123,#230124); +#230123 = CARTESIAN_POINT('',(136.057995,-127.056327,1.545)); +#230124 = VECTOR('',#230125,1.); +#230125 = DIRECTION('',(-0.997859140097,6.53998205277E-02,0.)); +#230126 = ORIENTED_EDGE('',*,*,#230127,.F.); +#230127 = EDGE_CURVE('',#230128,#230120,#230130,.T.); +#230128 = VERTEX_POINT('',#230129); +#230129 = CARTESIAN_POINT('',(136.,-127.052526,1.51)); +#230130 = LINE('',#230131,#230132); +#230131 = CARTESIAN_POINT('',(136.,-127.052526,1.51)); +#230132 = VECTOR('',#230133,1.); +#230133 = DIRECTION('',(0.,0.,1.)); +#230134 = ORIENTED_EDGE('',*,*,#230135,.F.); +#230135 = EDGE_CURVE('',#230097,#230128,#230136,.T.); +#230136 = LINE('',#230137,#230138); +#230137 = CARTESIAN_POINT('',(136.057995,-127.056327,1.51)); +#230138 = VECTOR('',#230139,1.); +#230139 = DIRECTION('',(-0.997859140097,6.53998205277E-02,0.)); +#230140 = PLANE('',#230141); +#230141 = AXIS2_PLACEMENT_3D('',#230142,#230143,#230144); +#230142 = CARTESIAN_POINT('',(136.057995,-127.056327,1.51)); +#230143 = DIRECTION('',(-6.53998205277E-02,-0.997859140097,0.)); +#230144 = DIRECTION('',(-0.997859140097,6.53998205277E-02,0.)); +#230145 = ADVANCED_FACE('',(#230146),#230171,.T.); +#230146 = FACE_BOUND('',#230147,.T.); +#230147 = EDGE_LOOP('',(#230148,#230149,#230157,#230165)); +#230148 = ORIENTED_EDGE('',*,*,#230127,.T.); +#230149 = ORIENTED_EDGE('',*,*,#230150,.T.); +#230150 = EDGE_CURVE('',#230120,#230151,#230153,.T.); +#230151 = VERTEX_POINT('',#230152); +#230152 = CARTESIAN_POINT('',(135.942004,-127.056327,1.545)); +#230153 = LINE('',#230154,#230155); +#230154 = CARTESIAN_POINT('',(136.,-127.052526,1.545)); +#230155 = VECTOR('',#230156,1.); +#230156 = DIRECTION('',(-0.997859213687,-6.539869768985E-02,0.)); +#230157 = ORIENTED_EDGE('',*,*,#230158,.F.); +#230158 = EDGE_CURVE('',#230159,#230151,#230161,.T.); +#230159 = VERTEX_POINT('',#230160); +#230160 = CARTESIAN_POINT('',(135.942004,-127.056327,1.51)); +#230161 = LINE('',#230162,#230163); +#230162 = CARTESIAN_POINT('',(135.942004,-127.056327,1.51)); +#230163 = VECTOR('',#230164,1.); +#230164 = DIRECTION('',(0.,0.,1.)); +#230165 = ORIENTED_EDGE('',*,*,#230166,.F.); +#230166 = EDGE_CURVE('',#230128,#230159,#230167,.T.); +#230167 = LINE('',#230168,#230169); +#230168 = CARTESIAN_POINT('',(136.,-127.052526,1.51)); +#230169 = VECTOR('',#230170,1.); +#230170 = DIRECTION('',(-0.997859213687,-6.539869768985E-02,0.)); +#230171 = PLANE('',#230172); +#230172 = AXIS2_PLACEMENT_3D('',#230173,#230174,#230175); +#230173 = CARTESIAN_POINT('',(136.,-127.052526,1.51)); +#230174 = DIRECTION('',(6.539869768985E-02,-0.997859213687,0.)); +#230175 = DIRECTION('',(-0.997859213687,-6.539869768985E-02,0.)); +#230176 = ADVANCED_FACE('',(#230177),#230202,.T.); +#230177 = FACE_BOUND('',#230178,.T.); +#230178 = EDGE_LOOP('',(#230179,#230180,#230188,#230196)); +#230179 = ORIENTED_EDGE('',*,*,#230158,.T.); +#230180 = ORIENTED_EDGE('',*,*,#230181,.T.); +#230181 = EDGE_CURVE('',#230151,#230182,#230184,.T.); +#230182 = VERTEX_POINT('',#230183); +#230183 = CARTESIAN_POINT('',(135.901921,-127.067067,1.545)); +#230184 = LINE('',#230185,#230186); +#230185 = CARTESIAN_POINT('',(135.942004,-127.056327,1.545)); +#230186 = VECTOR('',#230187,1.); +#230187 = DIRECTION('',(-0.965927076251,-0.258814380135,0.)); +#230188 = ORIENTED_EDGE('',*,*,#230189,.F.); +#230189 = EDGE_CURVE('',#230190,#230182,#230192,.T.); +#230190 = VERTEX_POINT('',#230191); +#230191 = CARTESIAN_POINT('',(135.901921,-127.067067,1.51)); +#230192 = LINE('',#230193,#230194); +#230193 = CARTESIAN_POINT('',(135.901921,-127.067067,1.51)); +#230194 = VECTOR('',#230195,1.); +#230195 = DIRECTION('',(0.,0.,1.)); +#230196 = ORIENTED_EDGE('',*,*,#230197,.F.); +#230197 = EDGE_CURVE('',#230159,#230190,#230198,.T.); +#230198 = LINE('',#230199,#230200); +#230199 = CARTESIAN_POINT('',(135.942004,-127.056327,1.51)); +#230200 = VECTOR('',#230201,1.); +#230201 = DIRECTION('',(-0.965927076251,-0.258814380135,0.)); +#230202 = PLANE('',#230203); +#230203 = AXIS2_PLACEMENT_3D('',#230204,#230205,#230206); +#230204 = CARTESIAN_POINT('',(135.942004,-127.056327,1.51)); +#230205 = DIRECTION('',(0.258814380135,-0.965927076251,0.)); +#230206 = DIRECTION('',(-0.965927076251,-0.258814380135,0.)); +#230207 = ADVANCED_FACE('',(#230208),#230233,.T.); +#230208 = FACE_BOUND('',#230209,.T.); +#230209 = EDGE_LOOP('',(#230210,#230211,#230219,#230227)); +#230210 = ORIENTED_EDGE('',*,*,#230189,.T.); +#230211 = ORIENTED_EDGE('',*,*,#230212,.T.); +#230212 = EDGE_CURVE('',#230182,#230213,#230215,.T.); +#230213 = VERTEX_POINT('',#230214); +#230214 = CARTESIAN_POINT('',(135.901921,-117.723839,1.545)); +#230215 = LINE('',#230216,#230217); +#230216 = CARTESIAN_POINT('',(135.901921,-127.067067,1.545)); +#230217 = VECTOR('',#230218,1.); +#230218 = DIRECTION('',(0.,1.,0.)); +#230219 = ORIENTED_EDGE('',*,*,#230220,.F.); +#230220 = EDGE_CURVE('',#230221,#230213,#230223,.T.); +#230221 = VERTEX_POINT('',#230222); +#230222 = CARTESIAN_POINT('',(135.901921,-117.723839,1.51)); +#230223 = LINE('',#230224,#230225); +#230224 = CARTESIAN_POINT('',(135.901921,-117.723839,1.51)); +#230225 = VECTOR('',#230226,1.); +#230226 = DIRECTION('',(0.,0.,1.)); +#230227 = ORIENTED_EDGE('',*,*,#230228,.F.); +#230228 = EDGE_CURVE('',#230190,#230221,#230229,.T.); +#230229 = LINE('',#230230,#230231); +#230230 = CARTESIAN_POINT('',(135.901921,-127.067067,1.51)); +#230231 = VECTOR('',#230232,1.); +#230232 = DIRECTION('',(0.,1.,0.)); +#230233 = PLANE('',#230234); +#230234 = AXIS2_PLACEMENT_3D('',#230235,#230236,#230237); +#230235 = CARTESIAN_POINT('',(135.901921,-127.067067,1.51)); +#230236 = DIRECTION('',(-1.,0.,0.)); +#230237 = DIRECTION('',(0.,1.,0.)); +#230238 = ADVANCED_FACE('',(#230239),#230264,.T.); +#230239 = FACE_BOUND('',#230240,.T.); +#230240 = EDGE_LOOP('',(#230241,#230242,#230250,#230258)); +#230241 = ORIENTED_EDGE('',*,*,#230220,.T.); +#230242 = ORIENTED_EDGE('',*,*,#230243,.T.); +#230243 = EDGE_CURVE('',#230213,#230244,#230246,.T.); +#230244 = VERTEX_POINT('',#230245); +#230245 = CARTESIAN_POINT('',(135.916853,-117.687791,1.545)); +#230246 = LINE('',#230247,#230248); +#230247 = CARTESIAN_POINT('',(135.901921,-117.723839,1.545)); +#230248 = VECTOR('',#230249,1.); +#230249 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230250 = ORIENTED_EDGE('',*,*,#230251,.F.); +#230251 = EDGE_CURVE('',#230252,#230244,#230254,.T.); +#230252 = VERTEX_POINT('',#230253); +#230253 = CARTESIAN_POINT('',(135.916853,-117.687791,1.51)); +#230254 = LINE('',#230255,#230256); +#230255 = CARTESIAN_POINT('',(135.916853,-117.687791,1.51)); +#230256 = VECTOR('',#230257,1.); +#230257 = DIRECTION('',(0.,0.,1.)); +#230258 = ORIENTED_EDGE('',*,*,#230259,.F.); +#230259 = EDGE_CURVE('',#230221,#230252,#230260,.T.); +#230260 = LINE('',#230261,#230262); +#230261 = CARTESIAN_POINT('',(135.901921,-117.723839,1.51)); +#230262 = VECTOR('',#230263,1.); +#230263 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230264 = PLANE('',#230265); +#230265 = AXIS2_PLACEMENT_3D('',#230266,#230267,#230268); +#230266 = CARTESIAN_POINT('',(135.901921,-117.723839,1.51)); +#230267 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#230268 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230269 = ADVANCED_FACE('',(#230270),#230295,.T.); +#230270 = FACE_BOUND('',#230271,.T.); +#230271 = EDGE_LOOP('',(#230272,#230273,#230281,#230289)); +#230272 = ORIENTED_EDGE('',*,*,#230251,.T.); +#230273 = ORIENTED_EDGE('',*,*,#230274,.T.); +#230274 = EDGE_CURVE('',#230244,#230275,#230277,.T.); +#230275 = VERTEX_POINT('',#230276); +#230276 = CARTESIAN_POINT('',(136.946917,-116.655009,1.545)); +#230277 = LINE('',#230278,#230279); +#230278 = CARTESIAN_POINT('',(135.916853,-117.687791,1.545)); +#230279 = VECTOR('',#230280,1.); +#230280 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#230281 = ORIENTED_EDGE('',*,*,#230282,.F.); +#230282 = EDGE_CURVE('',#230283,#230275,#230285,.T.); +#230283 = VERTEX_POINT('',#230284); +#230284 = CARTESIAN_POINT('',(136.946917,-116.655009,1.51)); +#230285 = LINE('',#230286,#230287); +#230286 = CARTESIAN_POINT('',(136.946917,-116.655009,1.51)); +#230287 = VECTOR('',#230288,1.); +#230288 = DIRECTION('',(0.,0.,1.)); +#230289 = ORIENTED_EDGE('',*,*,#230290,.F.); +#230290 = EDGE_CURVE('',#230252,#230283,#230291,.T.); +#230291 = LINE('',#230292,#230293); +#230292 = CARTESIAN_POINT('',(135.916853,-117.687791,1.51)); +#230293 = VECTOR('',#230294,1.); +#230294 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#230295 = PLANE('',#230296); +#230296 = AXIS2_PLACEMENT_3D('',#230297,#230298,#230299); +#230297 = CARTESIAN_POINT('',(135.916853,-117.687791,1.51)); +#230298 = DIRECTION('',(-0.708037848464,0.706174486329,0.)); +#230299 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#230300 = ADVANCED_FACE('',(#230301),#230326,.T.); +#230301 = FACE_BOUND('',#230302,.T.); +#230302 = EDGE_LOOP('',(#230303,#230304,#230312,#230320)); +#230303 = ORIENTED_EDGE('',*,*,#230282,.T.); +#230304 = ORIENTED_EDGE('',*,*,#230305,.T.); +#230305 = EDGE_CURVE('',#230275,#230306,#230308,.T.); +#230306 = VERTEX_POINT('',#230307); +#230307 = CARTESIAN_POINT('',(136.946917,-91.73981,1.545)); +#230308 = LINE('',#230309,#230310); +#230309 = CARTESIAN_POINT('',(136.946917,-116.655009,1.545)); +#230310 = VECTOR('',#230311,1.); +#230311 = DIRECTION('',(0.,1.,0.)); +#230312 = ORIENTED_EDGE('',*,*,#230313,.F.); +#230313 = EDGE_CURVE('',#230314,#230306,#230316,.T.); +#230314 = VERTEX_POINT('',#230315); +#230315 = CARTESIAN_POINT('',(136.946917,-91.73981,1.51)); +#230316 = LINE('',#230317,#230318); +#230317 = CARTESIAN_POINT('',(136.946917,-91.73981,1.51)); +#230318 = VECTOR('',#230319,1.); +#230319 = DIRECTION('',(0.,0.,1.)); +#230320 = ORIENTED_EDGE('',*,*,#230321,.F.); +#230321 = EDGE_CURVE('',#230283,#230314,#230322,.T.); +#230322 = LINE('',#230323,#230324); +#230323 = CARTESIAN_POINT('',(136.946917,-116.655009,1.51)); +#230324 = VECTOR('',#230325,1.); +#230325 = DIRECTION('',(0.,1.,0.)); +#230326 = PLANE('',#230327); +#230327 = AXIS2_PLACEMENT_3D('',#230328,#230329,#230330); +#230328 = CARTESIAN_POINT('',(136.946917,-116.655009,1.51)); +#230329 = DIRECTION('',(-1.,0.,0.)); +#230330 = DIRECTION('',(0.,1.,0.)); +#230331 = ADVANCED_FACE('',(#230332),#230357,.T.); +#230332 = FACE_BOUND('',#230333,.T.); +#230333 = EDGE_LOOP('',(#230334,#230335,#230343,#230351)); +#230334 = ORIENTED_EDGE('',*,*,#230313,.T.); +#230335 = ORIENTED_EDGE('',*,*,#230336,.T.); +#230336 = EDGE_CURVE('',#230306,#230337,#230339,.T.); +#230337 = VERTEX_POINT('',#230338); +#230338 = CARTESIAN_POINT('',(131.841118,-86.631293,1.545)); +#230339 = LINE('',#230340,#230341); +#230340 = CARTESIAN_POINT('',(136.946917,-91.73981,1.545)); +#230341 = VECTOR('',#230342,1.); +#230342 = DIRECTION('',(-0.706918597086,0.707294915219,0.)); +#230343 = ORIENTED_EDGE('',*,*,#230344,.F.); +#230344 = EDGE_CURVE('',#230345,#230337,#230347,.T.); +#230345 = VERTEX_POINT('',#230346); +#230346 = CARTESIAN_POINT('',(131.841118,-86.631293,1.51)); +#230347 = LINE('',#230348,#230349); +#230348 = CARTESIAN_POINT('',(131.841118,-86.631293,1.51)); +#230349 = VECTOR('',#230350,1.); +#230350 = DIRECTION('',(0.,0.,1.)); +#230351 = ORIENTED_EDGE('',*,*,#230352,.F.); +#230352 = EDGE_CURVE('',#230314,#230345,#230353,.T.); +#230353 = LINE('',#230354,#230355); +#230354 = CARTESIAN_POINT('',(136.946917,-91.73981,1.51)); +#230355 = VECTOR('',#230356,1.); +#230356 = DIRECTION('',(-0.706918597086,0.707294915219,0.)); +#230357 = PLANE('',#230358); +#230358 = AXIS2_PLACEMENT_3D('',#230359,#230360,#230361); +#230359 = CARTESIAN_POINT('',(136.946917,-91.73981,1.51)); +#230360 = DIRECTION('',(-0.707294915219,-0.706918597086,0.)); +#230361 = DIRECTION('',(-0.706918597086,0.707294915219,0.)); +#230362 = ADVANCED_FACE('',(#230363),#230390,.T.); +#230363 = FACE_BOUND('',#230364,.T.); +#230364 = EDGE_LOOP('',(#230365,#230366,#230375,#230383)); +#230365 = ORIENTED_EDGE('',*,*,#230344,.T.); +#230366 = ORIENTED_EDGE('',*,*,#230367,.T.); +#230367 = EDGE_CURVE('',#230337,#230368,#230370,.T.); +#230368 = VERTEX_POINT('',#230369); +#230369 = CARTESIAN_POINT('',(131.841118,-86.520179,1.545)); +#230370 = CIRCLE('',#230371,9.999758414127E-02); +#230371 = AXIS2_PLACEMENT_3D('',#230372,#230373,#230374); +#230372 = CARTESIAN_POINT('',(131.92426207125,-86.575736,1.545)); +#230373 = DIRECTION('',(0.,0.,-1.)); +#230374 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#230375 = ORIENTED_EDGE('',*,*,#230376,.F.); +#230376 = EDGE_CURVE('',#230377,#230368,#230379,.T.); +#230377 = VERTEX_POINT('',#230378); +#230378 = CARTESIAN_POINT('',(131.841118,-86.520179,1.51)); +#230379 = LINE('',#230380,#230381); +#230380 = CARTESIAN_POINT('',(131.841118,-86.520179,1.51)); +#230381 = VECTOR('',#230382,1.); +#230382 = DIRECTION('',(0.,0.,1.)); +#230383 = ORIENTED_EDGE('',*,*,#230384,.F.); +#230384 = EDGE_CURVE('',#230345,#230377,#230385,.T.); +#230385 = CIRCLE('',#230386,9.999758414127E-02); +#230386 = AXIS2_PLACEMENT_3D('',#230387,#230388,#230389); +#230387 = CARTESIAN_POINT('',(131.92426207125,-86.575736,1.51)); +#230388 = DIRECTION('',(0.,0.,-1.)); +#230389 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#230390 = CYLINDRICAL_SURFACE('',#230391,9.999758414127E-02); +#230391 = AXIS2_PLACEMENT_3D('',#230392,#230393,#230394); +#230392 = CARTESIAN_POINT('',(131.92426207125,-86.575736,1.51)); +#230393 = DIRECTION('',(0.,0.,-1.)); +#230394 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#230395 = ADVANCED_FACE('',(#230396),#230421,.T.); +#230396 = FACE_BOUND('',#230397,.T.); +#230397 = EDGE_LOOP('',(#230398,#230399,#230407,#230415)); +#230398 = ORIENTED_EDGE('',*,*,#230376,.T.); +#230399 = ORIENTED_EDGE('',*,*,#230400,.T.); +#230400 = EDGE_CURVE('',#230368,#230401,#230403,.T.); +#230401 = VERTEX_POINT('',#230402); +#230402 = CARTESIAN_POINT('',(131.957108,-86.401471,1.545)); +#230403 = LINE('',#230404,#230405); +#230404 = CARTESIAN_POINT('',(131.841118,-86.520179,1.545)); +#230405 = VECTOR('',#230406,1.); +#230406 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#230407 = ORIENTED_EDGE('',*,*,#230408,.F.); +#230408 = EDGE_CURVE('',#230409,#230401,#230411,.T.); +#230409 = VERTEX_POINT('',#230410); +#230410 = CARTESIAN_POINT('',(131.957108,-86.401471,1.51)); +#230411 = LINE('',#230412,#230413); +#230412 = CARTESIAN_POINT('',(131.957108,-86.401471,1.51)); +#230413 = VECTOR('',#230414,1.); +#230414 = DIRECTION('',(0.,0.,1.)); +#230415 = ORIENTED_EDGE('',*,*,#230416,.F.); +#230416 = EDGE_CURVE('',#230377,#230409,#230417,.T.); +#230417 = LINE('',#230418,#230419); +#230418 = CARTESIAN_POINT('',(131.841118,-86.520179,1.51)); +#230419 = VECTOR('',#230420,1.); +#230420 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#230421 = PLANE('',#230422); +#230422 = AXIS2_PLACEMENT_3D('',#230423,#230424,#230425); +#230423 = CARTESIAN_POINT('',(131.841118,-86.520179,1.51)); +#230424 = DIRECTION('',(-0.715247710302,0.698871027378,0.)); +#230425 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#230426 = ADVANCED_FACE('',(#230427),#230452,.T.); +#230427 = FACE_BOUND('',#230428,.T.); +#230428 = EDGE_LOOP('',(#230429,#230430,#230438,#230446)); +#230429 = ORIENTED_EDGE('',*,*,#230408,.T.); +#230430 = ORIENTED_EDGE('',*,*,#230431,.T.); +#230431 = EDGE_CURVE('',#230401,#230432,#230434,.T.); +#230432 = VERTEX_POINT('',#230433); +#230433 = CARTESIAN_POINT('',(131.959029,-86.357698,1.545)); +#230434 = LINE('',#230435,#230436); +#230435 = CARTESIAN_POINT('',(131.957108,-86.401471,1.545)); +#230436 = VECTOR('',#230437,1.); +#230437 = DIRECTION('',(4.384330078196E-02,0.99903842017,0.)); +#230438 = ORIENTED_EDGE('',*,*,#230439,.F.); +#230439 = EDGE_CURVE('',#230440,#230432,#230442,.T.); +#230440 = VERTEX_POINT('',#230441); +#230441 = CARTESIAN_POINT('',(131.959029,-86.357698,1.51)); +#230442 = LINE('',#230443,#230444); +#230443 = CARTESIAN_POINT('',(131.959029,-86.357698,1.51)); +#230444 = VECTOR('',#230445,1.); +#230445 = DIRECTION('',(0.,0.,1.)); +#230446 = ORIENTED_EDGE('',*,*,#230447,.F.); +#230447 = EDGE_CURVE('',#230409,#230440,#230448,.T.); +#230448 = LINE('',#230449,#230450); +#230449 = CARTESIAN_POINT('',(131.957108,-86.401471,1.51)); +#230450 = VECTOR('',#230451,1.); +#230451 = DIRECTION('',(4.384330078196E-02,0.99903842017,0.)); +#230452 = PLANE('',#230453); +#230453 = AXIS2_PLACEMENT_3D('',#230454,#230455,#230456); +#230454 = CARTESIAN_POINT('',(131.957108,-86.401471,1.51)); +#230455 = DIRECTION('',(-0.99903842017,4.384330078196E-02,0.)); +#230456 = DIRECTION('',(4.384330078196E-02,0.99903842017,0.)); +#230457 = ADVANCED_FACE('',(#230458),#230483,.T.); +#230458 = FACE_BOUND('',#230459,.T.); +#230459 = EDGE_LOOP('',(#230460,#230461,#230469,#230477)); +#230460 = ORIENTED_EDGE('',*,*,#230439,.T.); +#230461 = ORIENTED_EDGE('',*,*,#230462,.T.); +#230462 = EDGE_CURVE('',#230432,#230463,#230465,.T.); +#230463 = VERTEX_POINT('',#230464); +#230464 = CARTESIAN_POINT('',(131.973961,-86.32165,1.545)); +#230465 = LINE('',#230466,#230467); +#230466 = CARTESIAN_POINT('',(131.959029,-86.357698,1.545)); +#230467 = VECTOR('',#230468,1.); +#230468 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230469 = ORIENTED_EDGE('',*,*,#230470,.F.); +#230470 = EDGE_CURVE('',#230471,#230463,#230473,.T.); +#230471 = VERTEX_POINT('',#230472); +#230472 = CARTESIAN_POINT('',(131.973961,-86.32165,1.51)); +#230473 = LINE('',#230474,#230475); +#230474 = CARTESIAN_POINT('',(131.973961,-86.32165,1.51)); +#230475 = VECTOR('',#230476,1.); +#230476 = DIRECTION('',(0.,0.,1.)); +#230477 = ORIENTED_EDGE('',*,*,#230478,.F.); +#230478 = EDGE_CURVE('',#230440,#230471,#230479,.T.); +#230479 = LINE('',#230480,#230481); +#230480 = CARTESIAN_POINT('',(131.959029,-86.357698,1.51)); +#230481 = VECTOR('',#230482,1.); +#230482 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230483 = PLANE('',#230484); +#230484 = AXIS2_PLACEMENT_3D('',#230485,#230486,#230487); +#230485 = CARTESIAN_POINT('',(131.959029,-86.357698,1.51)); +#230486 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#230487 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230488 = ADVANCED_FACE('',(#230489),#230514,.T.); +#230489 = FACE_BOUND('',#230490,.T.); +#230490 = EDGE_LOOP('',(#230491,#230492,#230500,#230508)); +#230491 = ORIENTED_EDGE('',*,*,#230470,.T.); +#230492 = ORIENTED_EDGE('',*,*,#230493,.T.); +#230493 = EDGE_CURVE('',#230463,#230494,#230496,.T.); +#230494 = VERTEX_POINT('',#230495); +#230495 = CARTESIAN_POINT('',(134.118756,-84.176853,1.545)); +#230496 = LINE('',#230497,#230498); +#230497 = CARTESIAN_POINT('',(131.973961,-86.32165,1.545)); +#230498 = VECTOR('',#230499,1.); +#230499 = DIRECTION('',(0.707106451502,0.707107110871,0.)); +#230500 = ORIENTED_EDGE('',*,*,#230501,.F.); +#230501 = EDGE_CURVE('',#230502,#230494,#230504,.T.); +#230502 = VERTEX_POINT('',#230503); +#230503 = CARTESIAN_POINT('',(134.118756,-84.176853,1.51)); +#230504 = LINE('',#230505,#230506); +#230505 = CARTESIAN_POINT('',(134.118756,-84.176853,1.51)); +#230506 = VECTOR('',#230507,1.); +#230507 = DIRECTION('',(0.,0.,1.)); +#230508 = ORIENTED_EDGE('',*,*,#230509,.F.); +#230509 = EDGE_CURVE('',#230471,#230502,#230510,.T.); +#230510 = LINE('',#230511,#230512); +#230511 = CARTESIAN_POINT('',(131.973961,-86.32165,1.51)); +#230512 = VECTOR('',#230513,1.); +#230513 = DIRECTION('',(0.707106451502,0.707107110871,0.)); +#230514 = PLANE('',#230515); +#230515 = AXIS2_PLACEMENT_3D('',#230516,#230517,#230518); +#230516 = CARTESIAN_POINT('',(131.973961,-86.32165,1.51)); +#230517 = DIRECTION('',(-0.707107110871,0.707106451502,0.)); +#230518 = DIRECTION('',(0.707106451502,0.707107110871,0.)); +#230519 = ADVANCED_FACE('',(#230520),#230545,.T.); +#230520 = FACE_BOUND('',#230521,.T.); +#230521 = EDGE_LOOP('',(#230522,#230523,#230531,#230539)); +#230522 = ORIENTED_EDGE('',*,*,#230501,.T.); +#230523 = ORIENTED_EDGE('',*,*,#230524,.T.); +#230524 = EDGE_CURVE('',#230494,#230525,#230527,.T.); +#230525 = VERTEX_POINT('',#230526); +#230526 = CARTESIAN_POINT('',(134.154805,-84.161921,1.545)); +#230527 = LINE('',#230528,#230529); +#230528 = CARTESIAN_POINT('',(134.118756,-84.176853,1.545)); +#230529 = VECTOR('',#230530,1.); +#230530 = DIRECTION('',(0.923879393968,0.382683766837,0.)); +#230531 = ORIENTED_EDGE('',*,*,#230532,.F.); +#230532 = EDGE_CURVE('',#230533,#230525,#230535,.T.); +#230533 = VERTEX_POINT('',#230534); +#230534 = CARTESIAN_POINT('',(134.154805,-84.161921,1.51)); +#230535 = LINE('',#230536,#230537); +#230536 = CARTESIAN_POINT('',(134.154805,-84.161921,1.51)); +#230537 = VECTOR('',#230538,1.); +#230538 = DIRECTION('',(0.,0.,1.)); +#230539 = ORIENTED_EDGE('',*,*,#230540,.F.); +#230540 = EDGE_CURVE('',#230502,#230533,#230541,.T.); +#230541 = LINE('',#230542,#230543); +#230542 = CARTESIAN_POINT('',(134.118756,-84.176853,1.51)); +#230543 = VECTOR('',#230544,1.); +#230544 = DIRECTION('',(0.923879393968,0.382683766837,0.)); +#230545 = PLANE('',#230546); +#230546 = AXIS2_PLACEMENT_3D('',#230547,#230548,#230549); +#230547 = CARTESIAN_POINT('',(134.118756,-84.176853,1.51)); +#230548 = DIRECTION('',(-0.382683766837,0.923879393968,0.)); +#230549 = DIRECTION('',(0.923879393968,0.382683766837,0.)); +#230550 = ADVANCED_FACE('',(#230551),#230576,.T.); +#230551 = FACE_BOUND('',#230552,.T.); +#230552 = EDGE_LOOP('',(#230553,#230554,#230562,#230570)); +#230553 = ORIENTED_EDGE('',*,*,#230532,.T.); +#230554 = ORIENTED_EDGE('',*,*,#230555,.T.); +#230555 = EDGE_CURVE('',#230525,#230556,#230558,.T.); +#230556 = VERTEX_POINT('',#230557); +#230557 = CARTESIAN_POINT('',(134.594948,-84.16,1.545)); +#230558 = LINE('',#230559,#230560); +#230559 = CARTESIAN_POINT('',(134.154805,-84.161921,1.545)); +#230560 = VECTOR('',#230561,1.); +#230561 = DIRECTION('',(0.999990475747,4.364449062963E-03,0.)); +#230562 = ORIENTED_EDGE('',*,*,#230563,.F.); +#230563 = EDGE_CURVE('',#230564,#230556,#230566,.T.); +#230564 = VERTEX_POINT('',#230565); +#230565 = CARTESIAN_POINT('',(134.594948,-84.16,1.51)); +#230566 = LINE('',#230567,#230568); +#230567 = CARTESIAN_POINT('',(134.594948,-84.16,1.51)); +#230568 = VECTOR('',#230569,1.); +#230569 = DIRECTION('',(0.,0.,1.)); +#230570 = ORIENTED_EDGE('',*,*,#230571,.F.); +#230571 = EDGE_CURVE('',#230533,#230564,#230572,.T.); +#230572 = LINE('',#230573,#230574); +#230573 = CARTESIAN_POINT('',(134.154805,-84.161921,1.51)); +#230574 = VECTOR('',#230575,1.); +#230575 = DIRECTION('',(0.999990475747,4.364449062963E-03,0.)); +#230576 = PLANE('',#230577); +#230577 = AXIS2_PLACEMENT_3D('',#230578,#230579,#230580); +#230578 = CARTESIAN_POINT('',(134.154805,-84.161921,1.51)); +#230579 = DIRECTION('',(-4.364449062963E-03,0.999990475747,0.)); +#230580 = DIRECTION('',(0.999990475747,4.364449062963E-03,0.)); +#230581 = ADVANCED_FACE('',(#230582),#230607,.T.); +#230582 = FACE_BOUND('',#230583,.T.); +#230583 = EDGE_LOOP('',(#230584,#230585,#230593,#230601)); +#230584 = ORIENTED_EDGE('',*,*,#230563,.T.); +#230585 = ORIENTED_EDGE('',*,*,#230586,.T.); +#230586 = EDGE_CURVE('',#230556,#230587,#230589,.T.); +#230587 = VERTEX_POINT('',#230588); +#230588 = CARTESIAN_POINT('',(134.980812,-83.776853,1.545)); +#230589 = LINE('',#230590,#230591); +#230590 = CARTESIAN_POINT('',(134.594948,-84.16,1.545)); +#230591 = VECTOR('',#230592,1.); +#230592 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#230593 = ORIENTED_EDGE('',*,*,#230594,.F.); +#230594 = EDGE_CURVE('',#230595,#230587,#230597,.T.); +#230595 = VERTEX_POINT('',#230596); +#230596 = CARTESIAN_POINT('',(134.980812,-83.776853,1.51)); +#230597 = LINE('',#230598,#230599); +#230598 = CARTESIAN_POINT('',(134.980812,-83.776853,1.51)); +#230599 = VECTOR('',#230600,1.); +#230600 = DIRECTION('',(0.,0.,1.)); +#230601 = ORIENTED_EDGE('',*,*,#230602,.F.); +#230602 = EDGE_CURVE('',#230564,#230595,#230603,.T.); +#230603 = LINE('',#230604,#230605); +#230604 = CARTESIAN_POINT('',(134.594948,-84.16,1.51)); +#230605 = VECTOR('',#230606,1.); +#230606 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#230607 = PLANE('',#230608); +#230608 = AXIS2_PLACEMENT_3D('',#230609,#230610,#230611); +#230609 = CARTESIAN_POINT('',(134.594948,-84.16,1.51)); +#230610 = DIRECTION('',(-0.70460409784,0.709600637899,0.)); +#230611 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#230612 = ADVANCED_FACE('',(#230613),#230638,.T.); +#230613 = FACE_BOUND('',#230614,.T.); +#230614 = EDGE_LOOP('',(#230615,#230616,#230624,#230632)); +#230615 = ORIENTED_EDGE('',*,*,#230594,.T.); +#230616 = ORIENTED_EDGE('',*,*,#230617,.T.); +#230617 = EDGE_CURVE('',#230587,#230618,#230620,.T.); +#230618 = VERTEX_POINT('',#230619); +#230619 = CARTESIAN_POINT('',(135.01686,-83.761921,1.545)); +#230620 = LINE('',#230621,#230622); +#230621 = CARTESIAN_POINT('',(134.980812,-83.776853,1.545)); +#230622 = VECTOR('',#230623,1.); +#230623 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230624 = ORIENTED_EDGE('',*,*,#230625,.F.); +#230625 = EDGE_CURVE('',#230626,#230618,#230628,.T.); +#230626 = VERTEX_POINT('',#230627); +#230627 = CARTESIAN_POINT('',(135.01686,-83.761921,1.51)); +#230628 = LINE('',#230629,#230630); +#230629 = CARTESIAN_POINT('',(135.01686,-83.761921,1.51)); +#230630 = VECTOR('',#230631,1.); +#230631 = DIRECTION('',(0.,0.,1.)); +#230632 = ORIENTED_EDGE('',*,*,#230633,.F.); +#230633 = EDGE_CURVE('',#230595,#230626,#230634,.T.); +#230634 = LINE('',#230635,#230636); +#230635 = CARTESIAN_POINT('',(134.980812,-83.776853,1.51)); +#230636 = VECTOR('',#230637,1.); +#230637 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230638 = PLANE('',#230639); +#230639 = AXIS2_PLACEMENT_3D('',#230640,#230641,#230642); +#230640 = CARTESIAN_POINT('',(134.980812,-83.776853,1.51)); +#230641 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#230642 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230643 = ADVANCED_FACE('',(#230644),#230669,.T.); +#230644 = FACE_BOUND('',#230645,.T.); +#230645 = EDGE_LOOP('',(#230646,#230647,#230655,#230663)); +#230646 = ORIENTED_EDGE('',*,*,#230625,.T.); +#230647 = ORIENTED_EDGE('',*,*,#230648,.T.); +#230648 = EDGE_CURVE('',#230618,#230649,#230651,.T.); +#230649 = VERTEX_POINT('',#230650); +#230650 = CARTESIAN_POINT('',(135.699263,-83.76,1.545)); +#230651 = LINE('',#230652,#230653); +#230652 = CARTESIAN_POINT('',(135.01686,-83.761921,1.545)); +#230653 = VECTOR('',#230654,1.); +#230654 = DIRECTION('',(0.999996037764,2.815040948737E-03,0.)); +#230655 = ORIENTED_EDGE('',*,*,#230656,.F.); +#230656 = EDGE_CURVE('',#230657,#230649,#230659,.T.); +#230657 = VERTEX_POINT('',#230658); +#230658 = CARTESIAN_POINT('',(135.699263,-83.76,1.51)); +#230659 = LINE('',#230660,#230661); +#230660 = CARTESIAN_POINT('',(135.699263,-83.76,1.51)); +#230661 = VECTOR('',#230662,1.); +#230662 = DIRECTION('',(0.,0.,1.)); +#230663 = ORIENTED_EDGE('',*,*,#230664,.F.); +#230664 = EDGE_CURVE('',#230626,#230657,#230665,.T.); +#230665 = LINE('',#230666,#230667); +#230666 = CARTESIAN_POINT('',(135.01686,-83.761921,1.51)); +#230667 = VECTOR('',#230668,1.); +#230668 = DIRECTION('',(0.999996037764,2.815040948737E-03,0.)); +#230669 = PLANE('',#230670); +#230670 = AXIS2_PLACEMENT_3D('',#230671,#230672,#230673); +#230671 = CARTESIAN_POINT('',(135.01686,-83.761921,1.51)); +#230672 = DIRECTION('',(-2.815040948737E-03,0.999996037764,0.)); +#230673 = DIRECTION('',(0.999996037764,2.815040948737E-03,0.)); +#230674 = ADVANCED_FACE('',(#230675),#230700,.T.); +#230675 = FACE_BOUND('',#230676,.T.); +#230676 = EDGE_LOOP('',(#230677,#230678,#230686,#230694)); +#230677 = ORIENTED_EDGE('',*,*,#230656,.T.); +#230678 = ORIENTED_EDGE('',*,*,#230679,.T.); +#230679 = EDGE_CURVE('',#230649,#230680,#230682,.T.); +#230680 = VERTEX_POINT('',#230681); +#230681 = CARTESIAN_POINT('',(135.845128,-83.616853,1.545)); +#230682 = LINE('',#230683,#230684); +#230683 = CARTESIAN_POINT('',(135.699263,-83.76,1.545)); +#230684 = VECTOR('',#230685,1.); +#230685 = DIRECTION('',(0.71372517267,0.700425854675,0.)); +#230686 = ORIENTED_EDGE('',*,*,#230687,.F.); +#230687 = EDGE_CURVE('',#230688,#230680,#230690,.T.); +#230688 = VERTEX_POINT('',#230689); +#230689 = CARTESIAN_POINT('',(135.845128,-83.616853,1.51)); +#230690 = LINE('',#230691,#230692); +#230691 = CARTESIAN_POINT('',(135.845128,-83.616853,1.51)); +#230692 = VECTOR('',#230693,1.); +#230693 = DIRECTION('',(0.,0.,1.)); +#230694 = ORIENTED_EDGE('',*,*,#230695,.F.); +#230695 = EDGE_CURVE('',#230657,#230688,#230696,.T.); +#230696 = LINE('',#230697,#230698); +#230697 = CARTESIAN_POINT('',(135.699263,-83.76,1.51)); +#230698 = VECTOR('',#230699,1.); +#230699 = DIRECTION('',(0.71372517267,0.700425854675,0.)); +#230700 = PLANE('',#230701); +#230701 = AXIS2_PLACEMENT_3D('',#230702,#230703,#230704); +#230702 = CARTESIAN_POINT('',(135.699263,-83.76,1.51)); +#230703 = DIRECTION('',(-0.700425854675,0.71372517267,0.)); +#230704 = DIRECTION('',(0.71372517267,0.700425854675,0.)); +#230705 = ADVANCED_FACE('',(#230706),#230731,.T.); +#230706 = FACE_BOUND('',#230707,.T.); +#230707 = EDGE_LOOP('',(#230708,#230709,#230717,#230725)); +#230708 = ORIENTED_EDGE('',*,*,#230687,.T.); +#230709 = ORIENTED_EDGE('',*,*,#230710,.T.); +#230710 = EDGE_CURVE('',#230680,#230711,#230713,.T.); +#230711 = VERTEX_POINT('',#230712); +#230712 = CARTESIAN_POINT('',(135.881176,-83.601921,1.545)); +#230713 = LINE('',#230714,#230715); +#230714 = CARTESIAN_POINT('',(135.845128,-83.616853,1.545)); +#230715 = VECTOR('',#230716,1.); +#230716 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230717 = ORIENTED_EDGE('',*,*,#230718,.F.); +#230718 = EDGE_CURVE('',#230719,#230711,#230721,.T.); +#230719 = VERTEX_POINT('',#230720); +#230720 = CARTESIAN_POINT('',(135.881176,-83.601921,1.51)); +#230721 = LINE('',#230722,#230723); +#230722 = CARTESIAN_POINT('',(135.881176,-83.601921,1.51)); +#230723 = VECTOR('',#230724,1.); +#230724 = DIRECTION('',(0.,0.,1.)); +#230725 = ORIENTED_EDGE('',*,*,#230726,.F.); +#230726 = EDGE_CURVE('',#230688,#230719,#230727,.T.); +#230727 = LINE('',#230728,#230729); +#230728 = CARTESIAN_POINT('',(135.845128,-83.616853,1.51)); +#230729 = VECTOR('',#230730,1.); +#230730 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230731 = PLANE('',#230732); +#230732 = AXIS2_PLACEMENT_3D('',#230733,#230734,#230735); +#230733 = CARTESIAN_POINT('',(135.845128,-83.616853,1.51)); +#230734 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#230735 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#230736 = ADVANCED_FACE('',(#230737),#230762,.T.); +#230737 = FACE_BOUND('',#230738,.T.); +#230738 = EDGE_LOOP('',(#230739,#230740,#230748,#230756)); +#230739 = ORIENTED_EDGE('',*,*,#230718,.T.); +#230740 = ORIENTED_EDGE('',*,*,#230741,.T.); +#230741 = EDGE_CURVE('',#230711,#230742,#230744,.T.); +#230742 = VERTEX_POINT('',#230743); +#230743 = CARTESIAN_POINT('',(136.983578,-83.6,1.545)); +#230744 = LINE('',#230745,#230746); +#230745 = CARTESIAN_POINT('',(135.881176,-83.601921,1.545)); +#230746 = VECTOR('',#230747,1.); +#230747 = DIRECTION('',(0.999998481748,1.742555876576E-03,0.)); +#230748 = ORIENTED_EDGE('',*,*,#230749,.F.); +#230749 = EDGE_CURVE('',#230750,#230742,#230752,.T.); +#230750 = VERTEX_POINT('',#230751); +#230751 = CARTESIAN_POINT('',(136.983578,-83.6,1.51)); +#230752 = LINE('',#230753,#230754); +#230753 = CARTESIAN_POINT('',(136.983578,-83.6,1.51)); +#230754 = VECTOR('',#230755,1.); +#230755 = DIRECTION('',(0.,0.,1.)); +#230756 = ORIENTED_EDGE('',*,*,#230757,.F.); +#230757 = EDGE_CURVE('',#230719,#230750,#230758,.T.); +#230758 = LINE('',#230759,#230760); +#230759 = CARTESIAN_POINT('',(135.881176,-83.601921,1.51)); +#230760 = VECTOR('',#230761,1.); +#230761 = DIRECTION('',(0.999998481748,1.742555876576E-03,0.)); +#230762 = PLANE('',#230763); +#230763 = AXIS2_PLACEMENT_3D('',#230764,#230765,#230766); +#230764 = CARTESIAN_POINT('',(135.881176,-83.601921,1.51)); +#230765 = DIRECTION('',(-1.742555876576E-03,0.999998481748,0.)); +#230766 = DIRECTION('',(0.999998481748,1.742555876576E-03,0.)); +#230767 = ADVANCED_FACE('',(#230768),#230793,.T.); +#230768 = FACE_BOUND('',#230769,.T.); +#230769 = EDGE_LOOP('',(#230770,#230771,#230779,#230787)); +#230770 = ORIENTED_EDGE('',*,*,#230749,.T.); +#230771 = ORIENTED_EDGE('',*,*,#230772,.T.); +#230772 = EDGE_CURVE('',#230742,#230773,#230775,.T.); +#230773 = VERTEX_POINT('',#230774); +#230774 = CARTESIAN_POINT('',(137.265,-83.318578,1.545)); +#230775 = LINE('',#230776,#230777); +#230776 = CARTESIAN_POINT('',(136.983578,-83.6,1.545)); +#230777 = VECTOR('',#230778,1.); +#230778 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#230779 = ORIENTED_EDGE('',*,*,#230780,.F.); +#230780 = EDGE_CURVE('',#230781,#230773,#230783,.T.); +#230781 = VERTEX_POINT('',#230782); +#230782 = CARTESIAN_POINT('',(137.265,-83.318578,1.51)); +#230783 = LINE('',#230784,#230785); +#230784 = CARTESIAN_POINT('',(137.265,-83.318578,1.51)); +#230785 = VECTOR('',#230786,1.); +#230786 = DIRECTION('',(0.,0.,1.)); +#230787 = ORIENTED_EDGE('',*,*,#230788,.F.); +#230788 = EDGE_CURVE('',#230750,#230781,#230789,.T.); +#230789 = LINE('',#230790,#230791); +#230790 = CARTESIAN_POINT('',(136.983578,-83.6,1.51)); +#230791 = VECTOR('',#230792,1.); +#230792 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#230793 = PLANE('',#230794); +#230794 = AXIS2_PLACEMENT_3D('',#230795,#230796,#230797); +#230795 = CARTESIAN_POINT('',(136.983578,-83.6,1.51)); +#230796 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#230797 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#230798 = ADVANCED_FACE('',(#230799),#230824,.T.); +#230799 = FACE_BOUND('',#230800,.T.); +#230800 = EDGE_LOOP('',(#230801,#230802,#230810,#230818)); +#230801 = ORIENTED_EDGE('',*,*,#230780,.T.); +#230802 = ORIENTED_EDGE('',*,*,#230803,.T.); +#230803 = EDGE_CURVE('',#230773,#230804,#230806,.T.); +#230804 = VERTEX_POINT('',#230805); +#230805 = CARTESIAN_POINT('',(137.266921,-82.390491,1.545)); +#230806 = LINE('',#230807,#230808); +#230807 = CARTESIAN_POINT('',(137.265,-83.318578,1.545)); +#230808 = VECTOR('',#230809,1.); +#230809 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#230810 = ORIENTED_EDGE('',*,*,#230811,.F.); +#230811 = EDGE_CURVE('',#230812,#230804,#230814,.T.); +#230812 = VERTEX_POINT('',#230813); +#230813 = CARTESIAN_POINT('',(137.266921,-82.390491,1.51)); +#230814 = LINE('',#230815,#230816); +#230815 = CARTESIAN_POINT('',(137.266921,-82.390491,1.51)); +#230816 = VECTOR('',#230817,1.); +#230817 = DIRECTION('',(0.,0.,1.)); +#230818 = ORIENTED_EDGE('',*,*,#230819,.F.); +#230819 = EDGE_CURVE('',#230781,#230812,#230820,.T.); +#230820 = LINE('',#230821,#230822); +#230821 = CARTESIAN_POINT('',(137.265,-83.318578,1.51)); +#230822 = VECTOR('',#230823,1.); +#230823 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#230824 = PLANE('',#230825); +#230825 = AXIS2_PLACEMENT_3D('',#230826,#230827,#230828); +#230826 = CARTESIAN_POINT('',(137.265,-83.318578,1.51)); +#230827 = DIRECTION('',(-0.999997857869,2.069844621223E-03,0.)); +#230828 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#230829 = ADVANCED_FACE('',(#230830),#230855,.T.); +#230830 = FACE_BOUND('',#230831,.T.); +#230831 = EDGE_LOOP('',(#230832,#230833,#230841,#230849)); +#230832 = ORIENTED_EDGE('',*,*,#230811,.T.); +#230833 = ORIENTED_EDGE('',*,*,#230834,.T.); +#230834 = EDGE_CURVE('',#230804,#230835,#230837,.T.); +#230835 = VERTEX_POINT('',#230836); +#230836 = CARTESIAN_POINT('',(137.281853,-82.354443,1.545)); +#230837 = LINE('',#230838,#230839); +#230838 = CARTESIAN_POINT('',(137.266921,-82.390491,1.545)); +#230839 = VECTOR('',#230840,1.); +#230840 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230841 = ORIENTED_EDGE('',*,*,#230842,.F.); +#230842 = EDGE_CURVE('',#230843,#230835,#230845,.T.); +#230843 = VERTEX_POINT('',#230844); +#230844 = CARTESIAN_POINT('',(137.281853,-82.354443,1.51)); +#230845 = LINE('',#230846,#230847); +#230846 = CARTESIAN_POINT('',(137.281853,-82.354443,1.51)); +#230847 = VECTOR('',#230848,1.); +#230848 = DIRECTION('',(0.,0.,1.)); +#230849 = ORIENTED_EDGE('',*,*,#230850,.F.); +#230850 = EDGE_CURVE('',#230812,#230843,#230851,.T.); +#230851 = LINE('',#230852,#230853); +#230852 = CARTESIAN_POINT('',(137.266921,-82.390491,1.51)); +#230853 = VECTOR('',#230854,1.); +#230854 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230855 = PLANE('',#230856); +#230856 = AXIS2_PLACEMENT_3D('',#230857,#230858,#230859); +#230857 = CARTESIAN_POINT('',(137.266921,-82.390491,1.51)); +#230858 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#230859 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#230860 = ADVANCED_FACE('',(#230861),#230877,.T.); +#230861 = FACE_BOUND('',#230862,.T.); +#230862 = EDGE_LOOP('',(#230863,#230864,#230870,#230871)); +#230863 = ORIENTED_EDGE('',*,*,#230842,.T.); +#230864 = ORIENTED_EDGE('',*,*,#230865,.T.); +#230865 = EDGE_CURVE('',#230835,#229397,#230866,.T.); +#230866 = LINE('',#230867,#230868); +#230867 = CARTESIAN_POINT('',(137.281853,-82.354443,1.545)); +#230868 = VECTOR('',#230869,1.); +#230869 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#230870 = ORIENTED_EDGE('',*,*,#229394,.F.); +#230871 = ORIENTED_EDGE('',*,*,#230872,.F.); +#230872 = EDGE_CURVE('',#230843,#229395,#230873,.T.); +#230873 = LINE('',#230874,#230875); +#230874 = CARTESIAN_POINT('',(137.281853,-82.354443,1.51)); +#230875 = VECTOR('',#230876,1.); +#230876 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#230877 = PLANE('',#230878); +#230878 = AXIS2_PLACEMENT_3D('',#230879,#230880,#230881); +#230879 = CARTESIAN_POINT('',(137.281853,-82.354443,1.51)); +#230880 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#230881 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#230882 = ADVANCED_FACE('',(#230883),#230933,.F.); +#230883 = FACE_BOUND('',#230884,.T.); +#230884 = EDGE_LOOP('',(#230885,#230886,#230887,#230888,#230889,#230890, + #230891,#230892,#230893,#230894,#230895,#230896,#230897,#230898, + #230899,#230900,#230901,#230902,#230903,#230904,#230905,#230906, + #230907,#230908,#230909,#230910,#230911,#230912,#230913,#230914, + #230915,#230916,#230917,#230918,#230919,#230920,#230921,#230922, + #230923,#230924,#230925,#230926,#230927,#230928,#230929,#230930, + #230931,#230932)); +#230885 = ORIENTED_EDGE('',*,*,#229421,.T.); +#230886 = ORIENTED_EDGE('',*,*,#229453,.T.); +#230887 = ORIENTED_EDGE('',*,*,#229484,.T.); +#230888 = ORIENTED_EDGE('',*,*,#229515,.T.); +#230889 = ORIENTED_EDGE('',*,*,#229546,.T.); +#230890 = ORIENTED_EDGE('',*,*,#229577,.T.); +#230891 = ORIENTED_EDGE('',*,*,#229608,.T.); +#230892 = ORIENTED_EDGE('',*,*,#229639,.T.); +#230893 = ORIENTED_EDGE('',*,*,#229670,.T.); +#230894 = ORIENTED_EDGE('',*,*,#229701,.T.); +#230895 = ORIENTED_EDGE('',*,*,#229732,.T.); +#230896 = ORIENTED_EDGE('',*,*,#229763,.T.); +#230897 = ORIENTED_EDGE('',*,*,#229794,.T.); +#230898 = ORIENTED_EDGE('',*,*,#229825,.T.); +#230899 = ORIENTED_EDGE('',*,*,#229856,.T.); +#230900 = ORIENTED_EDGE('',*,*,#229887,.T.); +#230901 = ORIENTED_EDGE('',*,*,#229918,.T.); +#230902 = ORIENTED_EDGE('',*,*,#229949,.T.); +#230903 = ORIENTED_EDGE('',*,*,#229980,.T.); +#230904 = ORIENTED_EDGE('',*,*,#230011,.T.); +#230905 = ORIENTED_EDGE('',*,*,#230042,.T.); +#230906 = ORIENTED_EDGE('',*,*,#230073,.T.); +#230907 = ORIENTED_EDGE('',*,*,#230104,.T.); +#230908 = ORIENTED_EDGE('',*,*,#230135,.T.); +#230909 = ORIENTED_EDGE('',*,*,#230166,.T.); +#230910 = ORIENTED_EDGE('',*,*,#230197,.T.); +#230911 = ORIENTED_EDGE('',*,*,#230228,.T.); +#230912 = ORIENTED_EDGE('',*,*,#230259,.T.); +#230913 = ORIENTED_EDGE('',*,*,#230290,.T.); +#230914 = ORIENTED_EDGE('',*,*,#230321,.T.); +#230915 = ORIENTED_EDGE('',*,*,#230352,.T.); +#230916 = ORIENTED_EDGE('',*,*,#230384,.T.); +#230917 = ORIENTED_EDGE('',*,*,#230416,.T.); +#230918 = ORIENTED_EDGE('',*,*,#230447,.T.); +#230919 = ORIENTED_EDGE('',*,*,#230478,.T.); +#230920 = ORIENTED_EDGE('',*,*,#230509,.T.); +#230921 = ORIENTED_EDGE('',*,*,#230540,.T.); +#230922 = ORIENTED_EDGE('',*,*,#230571,.T.); +#230923 = ORIENTED_EDGE('',*,*,#230602,.T.); +#230924 = ORIENTED_EDGE('',*,*,#230633,.T.); +#230925 = ORIENTED_EDGE('',*,*,#230664,.T.); +#230926 = ORIENTED_EDGE('',*,*,#230695,.T.); +#230927 = ORIENTED_EDGE('',*,*,#230726,.T.); +#230928 = ORIENTED_EDGE('',*,*,#230757,.T.); +#230929 = ORIENTED_EDGE('',*,*,#230788,.T.); +#230930 = ORIENTED_EDGE('',*,*,#230819,.T.); +#230931 = ORIENTED_EDGE('',*,*,#230850,.T.); +#230932 = ORIENTED_EDGE('',*,*,#230872,.T.); +#230933 = PLANE('',#230934); +#230934 = AXIS2_PLACEMENT_3D('',#230935,#230936,#230937); +#230935 = CARTESIAN_POINT('',(0.,0.,1.51)); +#230936 = DIRECTION('',(0.,0.,1.)); +#230937 = DIRECTION('',(1.,0.,-0.)); +#230938 = ADVANCED_FACE('',(#230939),#230989,.T.); +#230939 = FACE_BOUND('',#230940,.F.); +#230940 = EDGE_LOOP('',(#230941,#230942,#230943,#230944,#230945,#230946, + #230947,#230948,#230949,#230950,#230951,#230952,#230953,#230954, + #230955,#230956,#230957,#230958,#230959,#230960,#230961,#230962, + #230963,#230964,#230965,#230966,#230967,#230968,#230969,#230970, + #230971,#230972,#230973,#230974,#230975,#230976,#230977,#230978, + #230979,#230980,#230981,#230982,#230983,#230984,#230985,#230986, + #230987,#230988)); +#230941 = ORIENTED_EDGE('',*,*,#229404,.T.); +#230942 = ORIENTED_EDGE('',*,*,#229437,.T.); +#230943 = ORIENTED_EDGE('',*,*,#229468,.T.); +#230944 = ORIENTED_EDGE('',*,*,#229499,.T.); +#230945 = ORIENTED_EDGE('',*,*,#229530,.T.); +#230946 = ORIENTED_EDGE('',*,*,#229561,.T.); +#230947 = ORIENTED_EDGE('',*,*,#229592,.T.); +#230948 = ORIENTED_EDGE('',*,*,#229623,.T.); +#230949 = ORIENTED_EDGE('',*,*,#229654,.T.); +#230950 = ORIENTED_EDGE('',*,*,#229685,.T.); +#230951 = ORIENTED_EDGE('',*,*,#229716,.T.); +#230952 = ORIENTED_EDGE('',*,*,#229747,.T.); +#230953 = ORIENTED_EDGE('',*,*,#229778,.T.); +#230954 = ORIENTED_EDGE('',*,*,#229809,.T.); +#230955 = ORIENTED_EDGE('',*,*,#229840,.T.); +#230956 = ORIENTED_EDGE('',*,*,#229871,.T.); +#230957 = ORIENTED_EDGE('',*,*,#229902,.T.); +#230958 = ORIENTED_EDGE('',*,*,#229933,.T.); +#230959 = ORIENTED_EDGE('',*,*,#229964,.T.); +#230960 = ORIENTED_EDGE('',*,*,#229995,.T.); +#230961 = ORIENTED_EDGE('',*,*,#230026,.T.); +#230962 = ORIENTED_EDGE('',*,*,#230057,.T.); +#230963 = ORIENTED_EDGE('',*,*,#230088,.T.); +#230964 = ORIENTED_EDGE('',*,*,#230119,.T.); +#230965 = ORIENTED_EDGE('',*,*,#230150,.T.); +#230966 = ORIENTED_EDGE('',*,*,#230181,.T.); +#230967 = ORIENTED_EDGE('',*,*,#230212,.T.); +#230968 = ORIENTED_EDGE('',*,*,#230243,.T.); +#230969 = ORIENTED_EDGE('',*,*,#230274,.T.); +#230970 = ORIENTED_EDGE('',*,*,#230305,.T.); +#230971 = ORIENTED_EDGE('',*,*,#230336,.T.); +#230972 = ORIENTED_EDGE('',*,*,#230367,.T.); +#230973 = ORIENTED_EDGE('',*,*,#230400,.T.); +#230974 = ORIENTED_EDGE('',*,*,#230431,.T.); +#230975 = ORIENTED_EDGE('',*,*,#230462,.T.); +#230976 = ORIENTED_EDGE('',*,*,#230493,.T.); +#230977 = ORIENTED_EDGE('',*,*,#230524,.T.); +#230978 = ORIENTED_EDGE('',*,*,#230555,.T.); +#230979 = ORIENTED_EDGE('',*,*,#230586,.T.); +#230980 = ORIENTED_EDGE('',*,*,#230617,.T.); +#230981 = ORIENTED_EDGE('',*,*,#230648,.T.); +#230982 = ORIENTED_EDGE('',*,*,#230679,.T.); +#230983 = ORIENTED_EDGE('',*,*,#230710,.T.); +#230984 = ORIENTED_EDGE('',*,*,#230741,.T.); +#230985 = ORIENTED_EDGE('',*,*,#230772,.T.); +#230986 = ORIENTED_EDGE('',*,*,#230803,.T.); +#230987 = ORIENTED_EDGE('',*,*,#230834,.T.); +#230988 = ORIENTED_EDGE('',*,*,#230865,.T.); +#230989 = PLANE('',#230990); +#230990 = AXIS2_PLACEMENT_3D('',#230991,#230992,#230993); +#230991 = CARTESIAN_POINT('',(0.,0.,1.545)); +#230992 = DIRECTION('',(0.,0.,1.)); +#230993 = DIRECTION('',(1.,0.,-0.)); +#230994 = MANIFOLD_SOLID_BREP('',#230995); +#230995 = CLOSED_SHELL('',(#230996,#231038,#231069,#231100,#231131, + #231162,#231195,#231226,#231257,#231288,#231319,#231350,#231381, + #231412,#231443,#231474,#231505,#231536,#231567,#231598,#231629, + #231660,#231691,#231722,#231753,#231784,#231815,#231846,#231877, + #231908,#231939,#231970,#232001,#232032,#232063,#232094,#232125, + #232156,#232187,#232218,#232249,#232280,#232311,#232342,#232373, + #232406,#232437,#232468,#232499,#232530,#232561,#232592,#232623, + #232654,#232685,#232716,#232747,#232778,#232809,#232840,#232871, + #232902,#232933,#232964,#232995,#233026,#233057,#233088,#233119, + #233150,#233181,#233212,#233243,#233274,#233305,#233336,#233367, + #233398,#233429,#233460,#233493,#233524,#233555,#233586,#233617, + #233648,#233679,#233701,#233796)); +#230996 = ADVANCED_FACE('',(#230997),#231033,.T.); +#230997 = FACE_BOUND('',#230998,.T.); +#230998 = EDGE_LOOP('',(#230999,#231009,#231018,#231026)); +#230999 = ORIENTED_EDGE('',*,*,#231000,.T.); +#231000 = EDGE_CURVE('',#231001,#231003,#231005,.T.); +#231001 = VERTEX_POINT('',#231002); +#231002 = CARTESIAN_POINT('',(136.039443,-82.326853,1.51)); +#231003 = VERTEX_POINT('',#231004); +#231004 = CARTESIAN_POINT('',(136.039443,-82.326853,1.545)); +#231005 = LINE('',#231006,#231007); +#231006 = CARTESIAN_POINT('',(136.039443,-82.326853,1.51)); +#231007 = VECTOR('',#231008,1.); +#231008 = DIRECTION('',(0.,0.,1.)); +#231009 = ORIENTED_EDGE('',*,*,#231010,.T.); +#231010 = EDGE_CURVE('',#231003,#231011,#231013,.T.); +#231011 = VERTEX_POINT('',#231012); +#231012 = CARTESIAN_POINT('',(136.193079,-82.390491,1.545)); +#231013 = CIRCLE('',#231014,0.100000590676); +#231014 = AXIS2_PLACEMENT_3D('',#231015,#231016,#231017); +#231015 = CARTESIAN_POINT('',(136.095,-82.41000068719,1.545)); +#231016 = DIRECTION('',(0.,0.,-1.)); +#231017 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#231018 = ORIENTED_EDGE('',*,*,#231019,.F.); +#231019 = EDGE_CURVE('',#231020,#231011,#231022,.T.); +#231020 = VERTEX_POINT('',#231021); +#231021 = CARTESIAN_POINT('',(136.193079,-82.390491,1.51)); +#231022 = LINE('',#231023,#231024); +#231023 = CARTESIAN_POINT('',(136.193079,-82.390491,1.51)); +#231024 = VECTOR('',#231025,1.); +#231025 = DIRECTION('',(0.,0.,1.)); +#231026 = ORIENTED_EDGE('',*,*,#231027,.F.); +#231027 = EDGE_CURVE('',#231001,#231020,#231028,.T.); +#231028 = CIRCLE('',#231029,0.100000590676); +#231029 = AXIS2_PLACEMENT_3D('',#231030,#231031,#231032); +#231030 = CARTESIAN_POINT('',(136.095,-82.41000068719,1.51)); +#231031 = DIRECTION('',(0.,0.,-1.)); +#231032 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#231033 = CYLINDRICAL_SURFACE('',#231034,0.100000590676); +#231034 = AXIS2_PLACEMENT_3D('',#231035,#231036,#231037); +#231035 = CARTESIAN_POINT('',(136.095,-82.41000068719,1.51)); +#231036 = DIRECTION('',(0.,0.,-1.)); +#231037 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#231038 = ADVANCED_FACE('',(#231039),#231064,.T.); +#231039 = FACE_BOUND('',#231040,.T.); +#231040 = EDGE_LOOP('',(#231041,#231042,#231050,#231058)); +#231041 = ORIENTED_EDGE('',*,*,#231019,.T.); +#231042 = ORIENTED_EDGE('',*,*,#231043,.T.); +#231043 = EDGE_CURVE('',#231011,#231044,#231046,.T.); +#231044 = VERTEX_POINT('',#231045); +#231045 = CARTESIAN_POINT('',(136.193079,-82.524509,1.545)); +#231046 = LINE('',#231047,#231048); +#231047 = CARTESIAN_POINT('',(136.193079,-82.390491,1.545)); +#231048 = VECTOR('',#231049,1.); +#231049 = DIRECTION('',(0.,-1.,0.)); +#231050 = ORIENTED_EDGE('',*,*,#231051,.F.); +#231051 = EDGE_CURVE('',#231052,#231044,#231054,.T.); +#231052 = VERTEX_POINT('',#231053); +#231053 = CARTESIAN_POINT('',(136.193079,-82.524509,1.51)); +#231054 = LINE('',#231055,#231056); +#231055 = CARTESIAN_POINT('',(136.193079,-82.524509,1.51)); +#231056 = VECTOR('',#231057,1.); +#231057 = DIRECTION('',(0.,0.,1.)); +#231058 = ORIENTED_EDGE('',*,*,#231059,.F.); +#231059 = EDGE_CURVE('',#231020,#231052,#231060,.T.); +#231060 = LINE('',#231061,#231062); +#231061 = CARTESIAN_POINT('',(136.193079,-82.390491,1.51)); +#231062 = VECTOR('',#231063,1.); +#231063 = DIRECTION('',(0.,-1.,0.)); +#231064 = PLANE('',#231065); +#231065 = AXIS2_PLACEMENT_3D('',#231066,#231067,#231068); +#231066 = CARTESIAN_POINT('',(136.193079,-82.390491,1.51)); +#231067 = DIRECTION('',(1.,0.,-0.)); +#231068 = DIRECTION('',(0.,-1.,0.)); +#231069 = ADVANCED_FACE('',(#231070),#231095,.T.); +#231070 = FACE_BOUND('',#231071,.T.); +#231071 = EDGE_LOOP('',(#231072,#231073,#231081,#231089)); +#231072 = ORIENTED_EDGE('',*,*,#231051,.T.); +#231073 = ORIENTED_EDGE('',*,*,#231074,.T.); +#231074 = EDGE_CURVE('',#231044,#231075,#231077,.T.); +#231075 = VERTEX_POINT('',#231076); +#231076 = CARTESIAN_POINT('',(136.178147,-82.560557,1.545)); +#231077 = LINE('',#231078,#231079); +#231078 = CARTESIAN_POINT('',(136.193079,-82.524509,1.545)); +#231079 = VECTOR('',#231080,1.); +#231080 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231081 = ORIENTED_EDGE('',*,*,#231082,.F.); +#231082 = EDGE_CURVE('',#231083,#231075,#231085,.T.); +#231083 = VERTEX_POINT('',#231084); +#231084 = CARTESIAN_POINT('',(136.178147,-82.560557,1.51)); +#231085 = LINE('',#231086,#231087); +#231086 = CARTESIAN_POINT('',(136.178147,-82.560557,1.51)); +#231087 = VECTOR('',#231088,1.); +#231088 = DIRECTION('',(0.,0.,1.)); +#231089 = ORIENTED_EDGE('',*,*,#231090,.F.); +#231090 = EDGE_CURVE('',#231052,#231083,#231091,.T.); +#231091 = LINE('',#231092,#231093); +#231092 = CARTESIAN_POINT('',(136.193079,-82.524509,1.51)); +#231093 = VECTOR('',#231094,1.); +#231094 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231095 = PLANE('',#231096); +#231096 = AXIS2_PLACEMENT_3D('',#231097,#231098,#231099); +#231097 = CARTESIAN_POINT('',(136.193079,-82.524509,1.51)); +#231098 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#231099 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231100 = ADVANCED_FACE('',(#231101),#231126,.T.); +#231101 = FACE_BOUND('',#231102,.T.); +#231102 = EDGE_LOOP('',(#231103,#231104,#231112,#231120)); +#231103 = ORIENTED_EDGE('',*,*,#231082,.T.); +#231104 = ORIENTED_EDGE('',*,*,#231105,.T.); +#231105 = EDGE_CURVE('',#231075,#231106,#231108,.T.); +#231106 = VERTEX_POINT('',#231107); +#231107 = CARTESIAN_POINT('',(135.675,-83.066422,1.545)); +#231108 = LINE('',#231109,#231110); +#231109 = CARTESIAN_POINT('',(136.178147,-82.560557,1.545)); +#231110 = VECTOR('',#231111,1.); +#231111 = DIRECTION('',(-0.705199472056,-0.709008959472,0.)); +#231112 = ORIENTED_EDGE('',*,*,#231113,.F.); +#231113 = EDGE_CURVE('',#231114,#231106,#231116,.T.); +#231114 = VERTEX_POINT('',#231115); +#231115 = CARTESIAN_POINT('',(135.675,-83.066422,1.51)); +#231116 = LINE('',#231117,#231118); +#231117 = CARTESIAN_POINT('',(135.675,-83.066422,1.51)); +#231118 = VECTOR('',#231119,1.); +#231119 = DIRECTION('',(0.,0.,1.)); +#231120 = ORIENTED_EDGE('',*,*,#231121,.F.); +#231121 = EDGE_CURVE('',#231083,#231114,#231122,.T.); +#231122 = LINE('',#231123,#231124); +#231123 = CARTESIAN_POINT('',(136.178147,-82.560557,1.51)); +#231124 = VECTOR('',#231125,1.); +#231125 = DIRECTION('',(-0.705199472056,-0.709008959472,0.)); +#231126 = PLANE('',#231127); +#231127 = AXIS2_PLACEMENT_3D('',#231128,#231129,#231130); +#231128 = CARTESIAN_POINT('',(136.178147,-82.560557,1.51)); +#231129 = DIRECTION('',(0.709008959472,-0.705199472056,0.)); +#231130 = DIRECTION('',(-0.705199472056,-0.709008959472,0.)); +#231131 = ADVANCED_FACE('',(#231132),#231157,.T.); +#231132 = FACE_BOUND('',#231133,.T.); +#231133 = EDGE_LOOP('',(#231134,#231135,#231143,#231151)); +#231134 = ORIENTED_EDGE('',*,*,#231113,.T.); +#231135 = ORIENTED_EDGE('',*,*,#231136,.T.); +#231136 = EDGE_CURVE('',#231106,#231137,#231139,.T.); +#231137 = VERTEX_POINT('',#231138); +#231138 = CARTESIAN_POINT('',(135.673079,-83.479509,1.545)); +#231139 = LINE('',#231140,#231141); +#231140 = CARTESIAN_POINT('',(135.675,-83.066422,1.545)); +#231141 = VECTOR('',#231142,1.); +#231142 = DIRECTION('',(-4.650301822111E-03,-0.999989187288,0.)); +#231143 = ORIENTED_EDGE('',*,*,#231144,.F.); +#231144 = EDGE_CURVE('',#231145,#231137,#231147,.T.); +#231145 = VERTEX_POINT('',#231146); +#231146 = CARTESIAN_POINT('',(135.673079,-83.479509,1.51)); +#231147 = LINE('',#231148,#231149); +#231148 = CARTESIAN_POINT('',(135.673079,-83.479509,1.51)); +#231149 = VECTOR('',#231150,1.); +#231150 = DIRECTION('',(0.,0.,1.)); +#231151 = ORIENTED_EDGE('',*,*,#231152,.F.); +#231152 = EDGE_CURVE('',#231114,#231145,#231153,.T.); +#231153 = LINE('',#231154,#231155); +#231154 = CARTESIAN_POINT('',(135.675,-83.066422,1.51)); +#231155 = VECTOR('',#231156,1.); +#231156 = DIRECTION('',(-4.650301822111E-03,-0.999989187288,0.)); +#231157 = PLANE('',#231158); +#231158 = AXIS2_PLACEMENT_3D('',#231159,#231160,#231161); +#231159 = CARTESIAN_POINT('',(135.675,-83.066422,1.51)); +#231160 = DIRECTION('',(0.999989187288,-4.650301822111E-03,0.)); +#231161 = DIRECTION('',(-4.650301822111E-03,-0.999989187288,0.)); +#231162 = ADVANCED_FACE('',(#231163),#231190,.T.); +#231163 = FACE_BOUND('',#231164,.T.); +#231164 = EDGE_LOOP('',(#231165,#231166,#231175,#231183)); +#231165 = ORIENTED_EDGE('',*,*,#231144,.T.); +#231166 = ORIENTED_EDGE('',*,*,#231167,.T.); +#231167 = EDGE_CURVE('',#231137,#231168,#231170,.T.); +#231168 = VERTEX_POINT('',#231169); +#231169 = CARTESIAN_POINT('',(135.594509,-83.558079,1.545)); +#231170 = CIRCLE('',#231171,0.100002891901); +#231171 = AXIS2_PLACEMENT_3D('',#231172,#231173,#231174); +#231172 = CARTESIAN_POINT('',(135.57499792896,-83.45999792896,1.545)); +#231173 = DIRECTION('',(0.,0.,-1.)); +#231174 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#231175 = ORIENTED_EDGE('',*,*,#231176,.F.); +#231176 = EDGE_CURVE('',#231177,#231168,#231179,.T.); +#231177 = VERTEX_POINT('',#231178); +#231178 = CARTESIAN_POINT('',(135.594509,-83.558079,1.51)); +#231179 = LINE('',#231180,#231181); +#231180 = CARTESIAN_POINT('',(135.594509,-83.558079,1.51)); +#231181 = VECTOR('',#231182,1.); +#231182 = DIRECTION('',(0.,0.,1.)); +#231183 = ORIENTED_EDGE('',*,*,#231184,.F.); +#231184 = EDGE_CURVE('',#231145,#231177,#231185,.T.); +#231185 = CIRCLE('',#231186,0.100002891901); +#231186 = AXIS2_PLACEMENT_3D('',#231187,#231188,#231189); +#231187 = CARTESIAN_POINT('',(135.57499792896,-83.45999792896,1.51)); +#231188 = DIRECTION('',(0.,0.,-1.)); +#231189 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#231190 = CYLINDRICAL_SURFACE('',#231191,0.100002891901); +#231191 = AXIS2_PLACEMENT_3D('',#231192,#231193,#231194); +#231192 = CARTESIAN_POINT('',(135.57499792896,-83.45999792896,1.51)); +#231193 = DIRECTION('',(0.,0.,-1.)); +#231194 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#231195 = ADVANCED_FACE('',(#231196),#231221,.T.); +#231196 = FACE_BOUND('',#231197,.T.); +#231197 = EDGE_LOOP('',(#231198,#231199,#231207,#231215)); +#231198 = ORIENTED_EDGE('',*,*,#231176,.T.); +#231199 = ORIENTED_EDGE('',*,*,#231200,.T.); +#231200 = EDGE_CURVE('',#231168,#231201,#231203,.T.); +#231201 = VERTEX_POINT('',#231202); +#231202 = CARTESIAN_POINT('',(134.805,-83.56,1.545)); +#231203 = LINE('',#231204,#231205); +#231204 = CARTESIAN_POINT('',(135.594509,-83.558079,1.545)); +#231205 = VECTOR('',#231206,1.); +#231206 = DIRECTION('',(-0.999997039885,-2.433150620974E-03,0.)); +#231207 = ORIENTED_EDGE('',*,*,#231208,.F.); +#231208 = EDGE_CURVE('',#231209,#231201,#231211,.T.); +#231209 = VERTEX_POINT('',#231210); +#231210 = CARTESIAN_POINT('',(134.805,-83.56,1.51)); +#231211 = LINE('',#231212,#231213); +#231212 = CARTESIAN_POINT('',(134.805,-83.56,1.51)); +#231213 = VECTOR('',#231214,1.); +#231214 = DIRECTION('',(0.,0.,1.)); +#231215 = ORIENTED_EDGE('',*,*,#231216,.F.); +#231216 = EDGE_CURVE('',#231177,#231209,#231217,.T.); +#231217 = LINE('',#231218,#231219); +#231218 = CARTESIAN_POINT('',(135.594509,-83.558079,1.51)); +#231219 = VECTOR('',#231220,1.); +#231220 = DIRECTION('',(-0.999997039885,-2.433150620974E-03,0.)); +#231221 = PLANE('',#231222); +#231222 = AXIS2_PLACEMENT_3D('',#231223,#231224,#231225); +#231223 = CARTESIAN_POINT('',(135.594509,-83.558079,1.51)); +#231224 = DIRECTION('',(2.433150620974E-03,-0.999997039885,0.)); +#231225 = DIRECTION('',(-0.999997039885,-2.433150620974E-03,0.)); +#231226 = ADVANCED_FACE('',(#231227),#231252,.T.); +#231227 = FACE_BOUND('',#231228,.T.); +#231228 = EDGE_LOOP('',(#231229,#231230,#231238,#231246)); +#231229 = ORIENTED_EDGE('',*,*,#231208,.T.); +#231230 = ORIENTED_EDGE('',*,*,#231231,.T.); +#231231 = EDGE_CURVE('',#231201,#231232,#231234,.T.); +#231232 = VERTEX_POINT('',#231233); +#231233 = CARTESIAN_POINT('',(134.803079,-83.645194,1.545)); +#231234 = LINE('',#231235,#231236); +#231235 = CARTESIAN_POINT('',(134.805,-83.56,1.545)); +#231236 = VECTOR('',#231237,1.); +#231237 = DIRECTION('',(-2.254280621765E-02,-0.999745878655,0.)); +#231238 = ORIENTED_EDGE('',*,*,#231239,.F.); +#231239 = EDGE_CURVE('',#231240,#231232,#231242,.T.); +#231240 = VERTEX_POINT('',#231241); +#231241 = CARTESIAN_POINT('',(134.803079,-83.645194,1.51)); +#231242 = LINE('',#231243,#231244); +#231243 = CARTESIAN_POINT('',(134.803079,-83.645194,1.51)); +#231244 = VECTOR('',#231245,1.); +#231245 = DIRECTION('',(0.,0.,1.)); +#231246 = ORIENTED_EDGE('',*,*,#231247,.F.); +#231247 = EDGE_CURVE('',#231209,#231240,#231248,.T.); +#231248 = LINE('',#231249,#231250); +#231249 = CARTESIAN_POINT('',(134.805,-83.56,1.51)); +#231250 = VECTOR('',#231251,1.); +#231251 = DIRECTION('',(-2.254280621765E-02,-0.999745878655,0.)); +#231252 = PLANE('',#231253); +#231253 = AXIS2_PLACEMENT_3D('',#231254,#231255,#231256); +#231254 = CARTESIAN_POINT('',(134.805,-83.56,1.51)); +#231255 = DIRECTION('',(0.999745878655,-2.254280621765E-02,0.)); +#231256 = DIRECTION('',(-2.254280621765E-02,-0.999745878655,0.)); +#231257 = ADVANCED_FACE('',(#231258),#231283,.T.); +#231258 = FACE_BOUND('',#231259,.T.); +#231259 = EDGE_LOOP('',(#231260,#231261,#231269,#231277)); +#231260 = ORIENTED_EDGE('',*,*,#231239,.T.); +#231261 = ORIENTED_EDGE('',*,*,#231262,.T.); +#231262 = EDGE_CURVE('',#231232,#231263,#231265,.T.); +#231263 = VERTEX_POINT('',#231264); +#231264 = CARTESIAN_POINT('',(134.788147,-83.681243,1.545)); +#231265 = LINE('',#231266,#231267); +#231266 = CARTESIAN_POINT('',(134.803079,-83.645194,1.545)); +#231267 = VECTOR('',#231268,1.); +#231268 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231269 = ORIENTED_EDGE('',*,*,#231270,.F.); +#231270 = EDGE_CURVE('',#231271,#231263,#231273,.T.); +#231271 = VERTEX_POINT('',#231272); +#231272 = CARTESIAN_POINT('',(134.788147,-83.681243,1.51)); +#231273 = LINE('',#231274,#231275); +#231274 = CARTESIAN_POINT('',(134.788147,-83.681243,1.51)); +#231275 = VECTOR('',#231276,1.); +#231276 = DIRECTION('',(0.,0.,1.)); +#231277 = ORIENTED_EDGE('',*,*,#231278,.F.); +#231278 = EDGE_CURVE('',#231240,#231271,#231279,.T.); +#231279 = LINE('',#231280,#231281); +#231280 = CARTESIAN_POINT('',(134.803079,-83.645194,1.51)); +#231281 = VECTOR('',#231282,1.); +#231282 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231283 = PLANE('',#231284); +#231284 = AXIS2_PLACEMENT_3D('',#231285,#231286,#231287); +#231285 = CARTESIAN_POINT('',(134.803079,-83.645194,1.51)); +#231286 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#231287 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231288 = ADVANCED_FACE('',(#231289),#231314,.T.); +#231289 = FACE_BOUND('',#231290,.T.); +#231290 = EDGE_LOOP('',(#231291,#231292,#231300,#231308)); +#231291 = ORIENTED_EDGE('',*,*,#231270,.T.); +#231292 = ORIENTED_EDGE('',*,*,#231293,.T.); +#231293 = EDGE_CURVE('',#231263,#231294,#231296,.T.); +#231294 = VERTEX_POINT('',#231295); +#231295 = CARTESIAN_POINT('',(134.526242,-83.943147,1.545)); +#231296 = LINE('',#231297,#231298); +#231297 = CARTESIAN_POINT('',(134.788147,-83.681243,1.545)); +#231298 = VECTOR('',#231299,1.); +#231299 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#231300 = ORIENTED_EDGE('',*,*,#231301,.F.); +#231301 = EDGE_CURVE('',#231302,#231294,#231304,.T.); +#231302 = VERTEX_POINT('',#231303); +#231303 = CARTESIAN_POINT('',(134.526242,-83.943147,1.51)); +#231304 = LINE('',#231305,#231306); +#231305 = CARTESIAN_POINT('',(134.526242,-83.943147,1.51)); +#231306 = VECTOR('',#231307,1.); +#231307 = DIRECTION('',(0.,0.,1.)); +#231308 = ORIENTED_EDGE('',*,*,#231309,.F.); +#231309 = EDGE_CURVE('',#231271,#231302,#231310,.T.); +#231310 = LINE('',#231311,#231312); +#231311 = CARTESIAN_POINT('',(134.788147,-83.681243,1.51)); +#231312 = VECTOR('',#231313,1.); +#231313 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#231314 = PLANE('',#231315); +#231315 = AXIS2_PLACEMENT_3D('',#231316,#231317,#231318); +#231316 = CARTESIAN_POINT('',(134.788147,-83.681243,1.51)); +#231317 = DIRECTION('',(0.707105431253,-0.707108131118,0.)); +#231318 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#231319 = ADVANCED_FACE('',(#231320),#231345,.T.); +#231320 = FACE_BOUND('',#231321,.T.); +#231321 = EDGE_LOOP('',(#231322,#231323,#231331,#231339)); +#231322 = ORIENTED_EDGE('',*,*,#231301,.T.); +#231323 = ORIENTED_EDGE('',*,*,#231324,.T.); +#231324 = EDGE_CURVE('',#231294,#231325,#231327,.T.); +#231325 = VERTEX_POINT('',#231326); +#231326 = CARTESIAN_POINT('',(134.490194,-83.958079,1.545)); +#231327 = LINE('',#231328,#231329); +#231328 = CARTESIAN_POINT('',(134.526242,-83.943147,1.545)); +#231329 = VECTOR('',#231330,1.); +#231330 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231331 = ORIENTED_EDGE('',*,*,#231332,.F.); +#231332 = EDGE_CURVE('',#231333,#231325,#231335,.T.); +#231333 = VERTEX_POINT('',#231334); +#231334 = CARTESIAN_POINT('',(134.490194,-83.958079,1.51)); +#231335 = LINE('',#231336,#231337); +#231336 = CARTESIAN_POINT('',(134.490194,-83.958079,1.51)); +#231337 = VECTOR('',#231338,1.); +#231338 = DIRECTION('',(0.,0.,1.)); +#231339 = ORIENTED_EDGE('',*,*,#231340,.F.); +#231340 = EDGE_CURVE('',#231302,#231333,#231341,.T.); +#231341 = LINE('',#231342,#231343); +#231342 = CARTESIAN_POINT('',(134.526242,-83.943147,1.51)); +#231343 = VECTOR('',#231344,1.); +#231344 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231345 = PLANE('',#231346); +#231346 = AXIS2_PLACEMENT_3D('',#231347,#231348,#231349); +#231347 = CARTESIAN_POINT('',(134.526242,-83.943147,1.51)); +#231348 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#231349 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231350 = ADVANCED_FACE('',(#231351),#231376,.T.); +#231351 = FACE_BOUND('',#231352,.T.); +#231352 = EDGE_LOOP('',(#231353,#231354,#231362,#231370)); +#231353 = ORIENTED_EDGE('',*,*,#231332,.T.); +#231354 = ORIENTED_EDGE('',*,*,#231355,.T.); +#231355 = EDGE_CURVE('',#231325,#231356,#231358,.T.); +#231356 = VERTEX_POINT('',#231357); +#231357 = CARTESIAN_POINT('',(134.05005,-83.96,1.545)); +#231358 = LINE('',#231359,#231360); +#231359 = CARTESIAN_POINT('',(134.490194,-83.958079,1.545)); +#231360 = VECTOR('',#231361,1.); +#231361 = DIRECTION('',(-0.99999047579,-4.364439147162E-03,0.)); +#231362 = ORIENTED_EDGE('',*,*,#231363,.F.); +#231363 = EDGE_CURVE('',#231364,#231356,#231366,.T.); +#231364 = VERTEX_POINT('',#231365); +#231365 = CARTESIAN_POINT('',(134.05005,-83.96,1.51)); +#231366 = LINE('',#231367,#231368); +#231367 = CARTESIAN_POINT('',(134.05005,-83.96,1.51)); +#231368 = VECTOR('',#231369,1.); +#231369 = DIRECTION('',(0.,0.,1.)); +#231370 = ORIENTED_EDGE('',*,*,#231371,.F.); +#231371 = EDGE_CURVE('',#231333,#231364,#231372,.T.); +#231372 = LINE('',#231373,#231374); +#231373 = CARTESIAN_POINT('',(134.490194,-83.958079,1.51)); +#231374 = VECTOR('',#231375,1.); +#231375 = DIRECTION('',(-0.99999047579,-4.364439147162E-03,0.)); +#231376 = PLANE('',#231377); +#231377 = AXIS2_PLACEMENT_3D('',#231378,#231379,#231380); +#231378 = CARTESIAN_POINT('',(134.490194,-83.958079,1.51)); +#231379 = DIRECTION('',(4.364439147162E-03,-0.99999047579,0.)); +#231380 = DIRECTION('',(-0.99999047579,-4.364439147162E-03,0.)); +#231381 = ADVANCED_FACE('',(#231382),#231407,.T.); +#231382 = FACE_BOUND('',#231383,.T.); +#231383 = EDGE_LOOP('',(#231384,#231385,#231393,#231401)); +#231384 = ORIENTED_EDGE('',*,*,#231363,.T.); +#231385 = ORIENTED_EDGE('',*,*,#231386,.T.); +#231386 = EDGE_CURVE('',#231356,#231387,#231389,.T.); +#231387 = VERTEX_POINT('',#231388); +#231388 = CARTESIAN_POINT('',(131.757108,-86.252943,1.545)); +#231389 = LINE('',#231390,#231391); +#231390 = CARTESIAN_POINT('',(134.05005,-83.96,1.545)); +#231391 = VECTOR('',#231392,1.); +#231392 = DIRECTION('',(-0.707106626995,-0.707106935379,0.)); +#231393 = ORIENTED_EDGE('',*,*,#231394,.F.); +#231394 = EDGE_CURVE('',#231395,#231387,#231397,.T.); +#231395 = VERTEX_POINT('',#231396); +#231396 = CARTESIAN_POINT('',(131.757108,-86.252943,1.51)); +#231397 = LINE('',#231398,#231399); +#231398 = CARTESIAN_POINT('',(131.757108,-86.252943,1.51)); +#231399 = VECTOR('',#231400,1.); +#231400 = DIRECTION('',(0.,0.,1.)); +#231401 = ORIENTED_EDGE('',*,*,#231402,.F.); +#231402 = EDGE_CURVE('',#231364,#231395,#231403,.T.); +#231403 = LINE('',#231404,#231405); +#231404 = CARTESIAN_POINT('',(134.05005,-83.96,1.51)); +#231405 = VECTOR('',#231406,1.); +#231406 = DIRECTION('',(-0.707106626995,-0.707106935379,0.)); +#231407 = PLANE('',#231408); +#231408 = AXIS2_PLACEMENT_3D('',#231409,#231410,#231411); +#231409 = CARTESIAN_POINT('',(134.05005,-83.96,1.51)); +#231410 = DIRECTION('',(0.707106935379,-0.707106626995,0.)); +#231411 = DIRECTION('',(-0.707106626995,-0.707106935379,0.)); +#231412 = ADVANCED_FACE('',(#231413),#231438,.T.); +#231413 = FACE_BOUND('',#231414,.T.); +#231414 = EDGE_LOOP('',(#231415,#231416,#231424,#231432)); +#231415 = ORIENTED_EDGE('',*,*,#231394,.T.); +#231416 = ORIENTED_EDGE('',*,*,#231417,.T.); +#231417 = EDGE_CURVE('',#231387,#231418,#231420,.T.); +#231418 = VERTEX_POINT('',#231419); +#231419 = CARTESIAN_POINT('',(131.755187,-86.296716,1.545)); +#231420 = LINE('',#231421,#231422); +#231421 = CARTESIAN_POINT('',(131.757108,-86.252943,1.545)); +#231422 = VECTOR('',#231423,1.); +#231423 = DIRECTION('',(-4.384330078196E-02,-0.99903842017,0.)); +#231424 = ORIENTED_EDGE('',*,*,#231425,.F.); +#231425 = EDGE_CURVE('',#231426,#231418,#231428,.T.); +#231426 = VERTEX_POINT('',#231427); +#231427 = CARTESIAN_POINT('',(131.755187,-86.296716,1.51)); +#231428 = LINE('',#231429,#231430); +#231429 = CARTESIAN_POINT('',(131.755187,-86.296716,1.51)); +#231430 = VECTOR('',#231431,1.); +#231431 = DIRECTION('',(0.,0.,1.)); +#231432 = ORIENTED_EDGE('',*,*,#231433,.F.); +#231433 = EDGE_CURVE('',#231395,#231426,#231434,.T.); +#231434 = LINE('',#231435,#231436); +#231435 = CARTESIAN_POINT('',(131.757108,-86.252943,1.51)); +#231436 = VECTOR('',#231437,1.); +#231437 = DIRECTION('',(-4.384330078196E-02,-0.99903842017,0.)); +#231438 = PLANE('',#231439); +#231439 = AXIS2_PLACEMENT_3D('',#231440,#231441,#231442); +#231440 = CARTESIAN_POINT('',(131.757108,-86.252943,1.51)); +#231441 = DIRECTION('',(0.99903842017,-4.384330078196E-02,0.)); +#231442 = DIRECTION('',(-4.384330078196E-02,-0.99903842017,0.)); +#231443 = ADVANCED_FACE('',(#231444),#231469,.T.); +#231444 = FACE_BOUND('',#231445,.T.); +#231445 = EDGE_LOOP('',(#231446,#231447,#231455,#231463)); +#231446 = ORIENTED_EDGE('',*,*,#231425,.T.); +#231447 = ORIENTED_EDGE('',*,*,#231448,.T.); +#231448 = EDGE_CURVE('',#231418,#231449,#231451,.T.); +#231449 = VERTEX_POINT('',#231450); +#231450 = CARTESIAN_POINT('',(131.740255,-86.332765,1.545)); +#231451 = LINE('',#231452,#231453); +#231452 = CARTESIAN_POINT('',(131.755187,-86.296716,1.545)); +#231453 = VECTOR('',#231454,1.); +#231454 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231455 = ORIENTED_EDGE('',*,*,#231456,.F.); +#231456 = EDGE_CURVE('',#231457,#231449,#231459,.T.); +#231457 = VERTEX_POINT('',#231458); +#231458 = CARTESIAN_POINT('',(131.740255,-86.332765,1.51)); +#231459 = LINE('',#231460,#231461); +#231460 = CARTESIAN_POINT('',(131.740255,-86.332765,1.51)); +#231461 = VECTOR('',#231462,1.); +#231462 = DIRECTION('',(0.,0.,1.)); +#231463 = ORIENTED_EDGE('',*,*,#231464,.F.); +#231464 = EDGE_CURVE('',#231426,#231457,#231465,.T.); +#231465 = LINE('',#231466,#231467); +#231466 = CARTESIAN_POINT('',(131.755187,-86.296716,1.51)); +#231467 = VECTOR('',#231468,1.); +#231468 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231469 = PLANE('',#231470); +#231470 = AXIS2_PLACEMENT_3D('',#231471,#231472,#231473); +#231471 = CARTESIAN_POINT('',(131.755187,-86.296716,1.51)); +#231472 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#231473 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231474 = ADVANCED_FACE('',(#231475),#231500,.T.); +#231475 = FACE_BOUND('',#231476,.T.); +#231476 = EDGE_LOOP('',(#231477,#231478,#231486,#231494)); +#231477 = ORIENTED_EDGE('',*,*,#231456,.T.); +#231478 = ORIENTED_EDGE('',*,*,#231479,.T.); +#231479 = EDGE_CURVE('',#231449,#231480,#231482,.T.); +#231480 = VERTEX_POINT('',#231481); +#231481 = CARTESIAN_POINT('',(131.624265,-86.451471,1.545)); +#231482 = LINE('',#231483,#231484); +#231483 = CARTESIAN_POINT('',(131.740255,-86.332765,1.545)); +#231484 = VECTOR('',#231485,1.); +#231485 = DIRECTION('',(-0.698877051058,-0.715241824493,0.)); +#231486 = ORIENTED_EDGE('',*,*,#231487,.F.); +#231487 = EDGE_CURVE('',#231488,#231480,#231490,.T.); +#231488 = VERTEX_POINT('',#231489); +#231489 = CARTESIAN_POINT('',(131.624265,-86.451471,1.51)); +#231490 = LINE('',#231491,#231492); +#231491 = CARTESIAN_POINT('',(131.624265,-86.451471,1.51)); +#231492 = VECTOR('',#231493,1.); +#231493 = DIRECTION('',(0.,0.,1.)); +#231494 = ORIENTED_EDGE('',*,*,#231495,.F.); +#231495 = EDGE_CURVE('',#231457,#231488,#231496,.T.); +#231496 = LINE('',#231497,#231498); +#231497 = CARTESIAN_POINT('',(131.740255,-86.332765,1.51)); +#231498 = VECTOR('',#231499,1.); +#231499 = DIRECTION('',(-0.698877051058,-0.715241824493,0.)); +#231500 = PLANE('',#231501); +#231501 = AXIS2_PLACEMENT_3D('',#231502,#231503,#231504); +#231502 = CARTESIAN_POINT('',(131.740255,-86.332765,1.51)); +#231503 = DIRECTION('',(0.715241824493,-0.698877051058,0.)); +#231504 = DIRECTION('',(-0.698877051058,-0.715241824493,0.)); +#231505 = ADVANCED_FACE('',(#231506),#231531,.T.); +#231506 = FACE_BOUND('',#231507,.T.); +#231507 = EDGE_LOOP('',(#231508,#231509,#231517,#231525)); +#231508 = ORIENTED_EDGE('',*,*,#231487,.T.); +#231509 = ORIENTED_EDGE('',*,*,#231510,.T.); +#231510 = EDGE_CURVE('',#231480,#231511,#231513,.T.); +#231511 = VERTEX_POINT('',#231512); +#231512 = CARTESIAN_POINT('',(131.622344,-86.495244,1.545)); +#231513 = LINE('',#231514,#231515); +#231514 = CARTESIAN_POINT('',(131.624265,-86.451471,1.545)); +#231515 = VECTOR('',#231516,1.); +#231516 = DIRECTION('',(-4.384330078261E-02,-0.99903842017,0.)); +#231517 = ORIENTED_EDGE('',*,*,#231518,.F.); +#231518 = EDGE_CURVE('',#231519,#231511,#231521,.T.); +#231519 = VERTEX_POINT('',#231520); +#231520 = CARTESIAN_POINT('',(131.622344,-86.495244,1.51)); +#231521 = LINE('',#231522,#231523); +#231522 = CARTESIAN_POINT('',(131.622344,-86.495244,1.51)); +#231523 = VECTOR('',#231524,1.); +#231524 = DIRECTION('',(0.,0.,1.)); +#231525 = ORIENTED_EDGE('',*,*,#231526,.F.); +#231526 = EDGE_CURVE('',#231488,#231519,#231527,.T.); +#231527 = LINE('',#231528,#231529); +#231528 = CARTESIAN_POINT('',(131.624265,-86.451471,1.51)); +#231529 = VECTOR('',#231530,1.); +#231530 = DIRECTION('',(-4.384330078261E-02,-0.99903842017,0.)); +#231531 = PLANE('',#231532); +#231532 = AXIS2_PLACEMENT_3D('',#231533,#231534,#231535); +#231533 = CARTESIAN_POINT('',(131.624265,-86.451471,1.51)); +#231534 = DIRECTION('',(0.99903842017,-4.384330078261E-02,0.)); +#231535 = DIRECTION('',(-4.384330078261E-02,-0.99903842017,0.)); +#231536 = ADVANCED_FACE('',(#231537),#231562,.T.); +#231537 = FACE_BOUND('',#231538,.T.); +#231538 = EDGE_LOOP('',(#231539,#231540,#231548,#231556)); +#231539 = ORIENTED_EDGE('',*,*,#231518,.T.); +#231540 = ORIENTED_EDGE('',*,*,#231541,.T.); +#231541 = EDGE_CURVE('',#231511,#231542,#231544,.T.); +#231542 = VERTEX_POINT('',#231543); +#231543 = CARTESIAN_POINT('',(131.607412,-86.531293,1.545)); +#231544 = LINE('',#231545,#231546); +#231545 = CARTESIAN_POINT('',(131.622344,-86.495244,1.545)); +#231546 = VECTOR('',#231547,1.); +#231547 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#231548 = ORIENTED_EDGE('',*,*,#231549,.F.); +#231549 = EDGE_CURVE('',#231550,#231542,#231552,.T.); +#231550 = VERTEX_POINT('',#231551); +#231551 = CARTESIAN_POINT('',(131.607412,-86.531293,1.51)); +#231552 = LINE('',#231553,#231554); +#231553 = CARTESIAN_POINT('',(131.607412,-86.531293,1.51)); +#231554 = VECTOR('',#231555,1.); +#231555 = DIRECTION('',(0.,0.,1.)); +#231556 = ORIENTED_EDGE('',*,*,#231557,.F.); +#231557 = EDGE_CURVE('',#231519,#231550,#231558,.T.); +#231558 = LINE('',#231559,#231560); +#231559 = CARTESIAN_POINT('',(131.622344,-86.495244,1.51)); +#231560 = VECTOR('',#231561,1.); +#231561 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#231562 = PLANE('',#231563); +#231563 = AXIS2_PLACEMENT_3D('',#231564,#231565,#231566); +#231564 = CARTESIAN_POINT('',(131.622344,-86.495244,1.51)); +#231565 = DIRECTION('',(0.923879393968,-0.382683766837,0.)); +#231566 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#231567 = ADVANCED_FACE('',(#231568),#231593,.T.); +#231568 = FACE_BOUND('',#231569,.T.); +#231569 = EDGE_LOOP('',(#231570,#231571,#231579,#231587)); +#231570 = ORIENTED_EDGE('',*,*,#231549,.T.); +#231571 = ORIENTED_EDGE('',*,*,#231572,.T.); +#231572 = EDGE_CURVE('',#231542,#231573,#231575,.T.); +#231573 = VERTEX_POINT('',#231574); +#231574 = CARTESIAN_POINT('',(131.305557,-86.833147,1.545)); +#231575 = LINE('',#231576,#231577); +#231576 = CARTESIAN_POINT('',(131.607412,-86.531293,1.545)); +#231577 = VECTOR('',#231578,1.); +#231578 = DIRECTION('',(-0.707107952457,-0.707105609915,0.)); +#231579 = ORIENTED_EDGE('',*,*,#231580,.F.); +#231580 = EDGE_CURVE('',#231581,#231573,#231583,.T.); +#231581 = VERTEX_POINT('',#231582); +#231582 = CARTESIAN_POINT('',(131.305557,-86.833147,1.51)); +#231583 = LINE('',#231584,#231585); +#231584 = CARTESIAN_POINT('',(131.305557,-86.833147,1.51)); +#231585 = VECTOR('',#231586,1.); +#231586 = DIRECTION('',(0.,0.,1.)); +#231587 = ORIENTED_EDGE('',*,*,#231588,.F.); +#231588 = EDGE_CURVE('',#231550,#231581,#231589,.T.); +#231589 = LINE('',#231590,#231591); +#231590 = CARTESIAN_POINT('',(131.607412,-86.531293,1.51)); +#231591 = VECTOR('',#231592,1.); +#231592 = DIRECTION('',(-0.707107952457,-0.707105609915,0.)); +#231593 = PLANE('',#231594); +#231594 = AXIS2_PLACEMENT_3D('',#231595,#231596,#231597); +#231595 = CARTESIAN_POINT('',(131.607412,-86.531293,1.51)); +#231596 = DIRECTION('',(0.707105609915,-0.707107952457,0.)); +#231597 = DIRECTION('',(-0.707107952457,-0.707105609915,0.)); +#231598 = ADVANCED_FACE('',(#231599),#231624,.T.); +#231599 = FACE_BOUND('',#231600,.T.); +#231600 = EDGE_LOOP('',(#231601,#231602,#231610,#231618)); +#231601 = ORIENTED_EDGE('',*,*,#231580,.T.); +#231602 = ORIENTED_EDGE('',*,*,#231603,.T.); +#231603 = EDGE_CURVE('',#231573,#231604,#231606,.T.); +#231604 = VERTEX_POINT('',#231605); +#231605 = CARTESIAN_POINT('',(131.269509,-86.848079,1.545)); +#231606 = LINE('',#231607,#231608); +#231607 = CARTESIAN_POINT('',(131.305557,-86.833147,1.545)); +#231608 = VECTOR('',#231609,1.); +#231609 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231610 = ORIENTED_EDGE('',*,*,#231611,.F.); +#231611 = EDGE_CURVE('',#231612,#231604,#231614,.T.); +#231612 = VERTEX_POINT('',#231613); +#231613 = CARTESIAN_POINT('',(131.269509,-86.848079,1.51)); +#231614 = LINE('',#231615,#231616); +#231615 = CARTESIAN_POINT('',(131.269509,-86.848079,1.51)); +#231616 = VECTOR('',#231617,1.); +#231617 = DIRECTION('',(0.,0.,1.)); +#231618 = ORIENTED_EDGE('',*,*,#231619,.F.); +#231619 = EDGE_CURVE('',#231581,#231612,#231620,.T.); +#231620 = LINE('',#231621,#231622); +#231621 = CARTESIAN_POINT('',(131.305557,-86.833147,1.51)); +#231622 = VECTOR('',#231623,1.); +#231623 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231624 = PLANE('',#231625); +#231625 = AXIS2_PLACEMENT_3D('',#231626,#231627,#231628); +#231626 = CARTESIAN_POINT('',(131.305557,-86.833147,1.51)); +#231627 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#231628 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#231629 = ADVANCED_FACE('',(#231630),#231655,.T.); +#231630 = FACE_BOUND('',#231631,.T.); +#231631 = EDGE_LOOP('',(#231632,#231633,#231641,#231649)); +#231632 = ORIENTED_EDGE('',*,*,#231611,.T.); +#231633 = ORIENTED_EDGE('',*,*,#231634,.T.); +#231634 = EDGE_CURVE('',#231604,#231635,#231637,.T.); +#231635 = VERTEX_POINT('',#231636); +#231636 = CARTESIAN_POINT('',(130.892893,-86.85,1.545)); +#231637 = LINE('',#231638,#231639); +#231638 = CARTESIAN_POINT('',(131.269509,-86.848079,1.545)); +#231639 = VECTOR('',#231640,1.); +#231640 = DIRECTION('',(-0.999986991754,-5.100619759001E-03,0.)); +#231641 = ORIENTED_EDGE('',*,*,#231642,.F.); +#231642 = EDGE_CURVE('',#231643,#231635,#231645,.T.); +#231643 = VERTEX_POINT('',#231644); +#231644 = CARTESIAN_POINT('',(130.892893,-86.85,1.51)); +#231645 = LINE('',#231646,#231647); +#231646 = CARTESIAN_POINT('',(130.892893,-86.85,1.51)); +#231647 = VECTOR('',#231648,1.); +#231648 = DIRECTION('',(0.,0.,1.)); +#231649 = ORIENTED_EDGE('',*,*,#231650,.F.); +#231650 = EDGE_CURVE('',#231612,#231643,#231651,.T.); +#231651 = LINE('',#231652,#231653); +#231652 = CARTESIAN_POINT('',(131.269509,-86.848079,1.51)); +#231653 = VECTOR('',#231654,1.); +#231654 = DIRECTION('',(-0.999986991754,-5.100619759001E-03,0.)); +#231655 = PLANE('',#231656); +#231656 = AXIS2_PLACEMENT_3D('',#231657,#231658,#231659); +#231657 = CARTESIAN_POINT('',(131.269509,-86.848079,1.51)); +#231658 = DIRECTION('',(5.100619759001E-03,-0.999986991754,0.)); +#231659 = DIRECTION('',(-0.999986991754,-5.100619759001E-03,0.)); +#231660 = ADVANCED_FACE('',(#231661),#231686,.T.); +#231661 = FACE_BOUND('',#231662,.T.); +#231662 = EDGE_LOOP('',(#231663,#231664,#231672,#231680)); +#231663 = ORIENTED_EDGE('',*,*,#231642,.T.); +#231664 = ORIENTED_EDGE('',*,*,#231665,.T.); +#231665 = EDGE_CURVE('',#231635,#231666,#231668,.T.); +#231666 = VERTEX_POINT('',#231667); +#231667 = CARTESIAN_POINT('',(130.6,-87.142893,1.545)); +#231668 = LINE('',#231669,#231670); +#231669 = CARTESIAN_POINT('',(130.892893,-86.85,1.545)); +#231670 = VECTOR('',#231671,1.); +#231671 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#231672 = ORIENTED_EDGE('',*,*,#231673,.F.); +#231673 = EDGE_CURVE('',#231674,#231666,#231676,.T.); +#231674 = VERTEX_POINT('',#231675); +#231675 = CARTESIAN_POINT('',(130.6,-87.142893,1.51)); +#231676 = LINE('',#231677,#231678); +#231677 = CARTESIAN_POINT('',(130.6,-87.142893,1.51)); +#231678 = VECTOR('',#231679,1.); +#231679 = DIRECTION('',(0.,0.,1.)); +#231680 = ORIENTED_EDGE('',*,*,#231681,.F.); +#231681 = EDGE_CURVE('',#231643,#231674,#231682,.T.); +#231682 = LINE('',#231683,#231684); +#231683 = CARTESIAN_POINT('',(130.892893,-86.85,1.51)); +#231684 = VECTOR('',#231685,1.); +#231685 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#231686 = PLANE('',#231687); +#231687 = AXIS2_PLACEMENT_3D('',#231688,#231689,#231690); +#231688 = CARTESIAN_POINT('',(130.892893,-86.85,1.51)); +#231689 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#231690 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#231691 = ADVANCED_FACE('',(#231692),#231717,.T.); +#231692 = FACE_BOUND('',#231693,.T.); +#231693 = EDGE_LOOP('',(#231694,#231695,#231703,#231711)); +#231694 = ORIENTED_EDGE('',*,*,#231673,.T.); +#231695 = ORIENTED_EDGE('',*,*,#231696,.T.); +#231696 = EDGE_CURVE('',#231666,#231697,#231699,.T.); +#231697 = VERTEX_POINT('',#231698); +#231698 = CARTESIAN_POINT('',(130.598079,-87.519509,1.545)); +#231699 = LINE('',#231700,#231701); +#231700 = CARTESIAN_POINT('',(130.6,-87.142893,1.545)); +#231701 = VECTOR('',#231702,1.); +#231702 = DIRECTION('',(-5.100619758964E-03,-0.999986991754,0.)); +#231703 = ORIENTED_EDGE('',*,*,#231704,.F.); +#231704 = EDGE_CURVE('',#231705,#231697,#231707,.T.); +#231705 = VERTEX_POINT('',#231706); +#231706 = CARTESIAN_POINT('',(130.598079,-87.519509,1.51)); +#231707 = LINE('',#231708,#231709); +#231708 = CARTESIAN_POINT('',(130.598079,-87.519509,1.51)); +#231709 = VECTOR('',#231710,1.); +#231710 = DIRECTION('',(0.,0.,1.)); +#231711 = ORIENTED_EDGE('',*,*,#231712,.F.); +#231712 = EDGE_CURVE('',#231674,#231705,#231713,.T.); +#231713 = LINE('',#231714,#231715); +#231714 = CARTESIAN_POINT('',(130.6,-87.142893,1.51)); +#231715 = VECTOR('',#231716,1.); +#231716 = DIRECTION('',(-5.100619758964E-03,-0.999986991754,0.)); +#231717 = PLANE('',#231718); +#231718 = AXIS2_PLACEMENT_3D('',#231719,#231720,#231721); +#231719 = CARTESIAN_POINT('',(130.6,-87.142893,1.51)); +#231720 = DIRECTION('',(0.999986991754,-5.100619758964E-03,0.)); +#231721 = DIRECTION('',(-5.100619758964E-03,-0.999986991754,0.)); +#231722 = ADVANCED_FACE('',(#231723),#231748,.T.); +#231723 = FACE_BOUND('',#231724,.T.); +#231724 = EDGE_LOOP('',(#231725,#231726,#231734,#231742)); +#231725 = ORIENTED_EDGE('',*,*,#231704,.T.); +#231726 = ORIENTED_EDGE('',*,*,#231727,.T.); +#231727 = EDGE_CURVE('',#231697,#231728,#231730,.T.); +#231728 = VERTEX_POINT('',#231729); +#231729 = CARTESIAN_POINT('',(130.583147,-87.555558,1.545)); +#231730 = LINE('',#231731,#231732); +#231731 = CARTESIAN_POINT('',(130.598079,-87.519509,1.545)); +#231732 = VECTOR('',#231733,1.); +#231733 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231734 = ORIENTED_EDGE('',*,*,#231735,.F.); +#231735 = EDGE_CURVE('',#231736,#231728,#231738,.T.); +#231736 = VERTEX_POINT('',#231737); +#231737 = CARTESIAN_POINT('',(130.583147,-87.555558,1.51)); +#231738 = LINE('',#231739,#231740); +#231739 = CARTESIAN_POINT('',(130.583147,-87.555558,1.51)); +#231740 = VECTOR('',#231741,1.); +#231741 = DIRECTION('',(0.,0.,1.)); +#231742 = ORIENTED_EDGE('',*,*,#231743,.F.); +#231743 = EDGE_CURVE('',#231705,#231736,#231744,.T.); +#231744 = LINE('',#231745,#231746); +#231745 = CARTESIAN_POINT('',(130.598079,-87.519509,1.51)); +#231746 = VECTOR('',#231747,1.); +#231747 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231748 = PLANE('',#231749); +#231749 = AXIS2_PLACEMENT_3D('',#231750,#231751,#231752); +#231750 = CARTESIAN_POINT('',(130.598079,-87.519509,1.51)); +#231751 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#231752 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#231753 = ADVANCED_FACE('',(#231754),#231779,.T.); +#231754 = FACE_BOUND('',#231755,.T.); +#231755 = EDGE_LOOP('',(#231756,#231757,#231765,#231773)); +#231756 = ORIENTED_EDGE('',*,*,#231735,.T.); +#231757 = ORIENTED_EDGE('',*,*,#231758,.T.); +#231758 = EDGE_CURVE('',#231728,#231759,#231761,.T.); +#231759 = VERTEX_POINT('',#231760); +#231760 = CARTESIAN_POINT('',(129.7,-88.441422,1.545)); +#231761 = LINE('',#231762,#231763); +#231762 = CARTESIAN_POINT('',(130.583147,-87.555558,1.545)); +#231763 = VECTOR('',#231764,1.); +#231764 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#231765 = ORIENTED_EDGE('',*,*,#231766,.F.); +#231766 = EDGE_CURVE('',#231767,#231759,#231769,.T.); +#231767 = VERTEX_POINT('',#231768); +#231768 = CARTESIAN_POINT('',(129.7,-88.441422,1.51)); +#231769 = LINE('',#231770,#231771); +#231770 = CARTESIAN_POINT('',(129.7,-88.441422,1.51)); +#231771 = VECTOR('',#231772,1.); +#231772 = DIRECTION('',(0.,0.,1.)); +#231773 = ORIENTED_EDGE('',*,*,#231774,.F.); +#231774 = EDGE_CURVE('',#231736,#231767,#231775,.T.); +#231775 = LINE('',#231776,#231777); +#231776 = CARTESIAN_POINT('',(130.583147,-87.555558,1.51)); +#231777 = VECTOR('',#231778,1.); +#231778 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#231779 = PLANE('',#231780); +#231780 = AXIS2_PLACEMENT_3D('',#231781,#231782,#231783); +#231781 = CARTESIAN_POINT('',(130.583147,-87.555558,1.51)); +#231782 = DIRECTION('',(0.708191981607,-0.706019912741,0.)); +#231783 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#231784 = ADVANCED_FACE('',(#231785),#231810,.T.); +#231785 = FACE_BOUND('',#231786,.T.); +#231786 = EDGE_LOOP('',(#231787,#231788,#231796,#231804)); +#231787 = ORIENTED_EDGE('',*,*,#231766,.T.); +#231788 = ORIENTED_EDGE('',*,*,#231789,.T.); +#231789 = EDGE_CURVE('',#231759,#231790,#231792,.T.); +#231790 = VERTEX_POINT('',#231791); +#231791 = CARTESIAN_POINT('',(129.698079,-100.719509,1.545)); +#231792 = LINE('',#231793,#231794); +#231793 = CARTESIAN_POINT('',(129.7,-88.441422,1.545)); +#231794 = VECTOR('',#231795,1.); +#231795 = DIRECTION('',(-1.564575960791E-04,-0.999999987761,0.)); +#231796 = ORIENTED_EDGE('',*,*,#231797,.F.); +#231797 = EDGE_CURVE('',#231798,#231790,#231800,.T.); +#231798 = VERTEX_POINT('',#231799); +#231799 = CARTESIAN_POINT('',(129.698079,-100.719509,1.51)); +#231800 = LINE('',#231801,#231802); +#231801 = CARTESIAN_POINT('',(129.698079,-100.719509,1.51)); +#231802 = VECTOR('',#231803,1.); +#231803 = DIRECTION('',(0.,0.,1.)); +#231804 = ORIENTED_EDGE('',*,*,#231805,.F.); +#231805 = EDGE_CURVE('',#231767,#231798,#231806,.T.); +#231806 = LINE('',#231807,#231808); +#231807 = CARTESIAN_POINT('',(129.7,-88.441422,1.51)); +#231808 = VECTOR('',#231809,1.); +#231809 = DIRECTION('',(-1.564575960791E-04,-0.999999987761,0.)); +#231810 = PLANE('',#231811); +#231811 = AXIS2_PLACEMENT_3D('',#231812,#231813,#231814); +#231812 = CARTESIAN_POINT('',(129.7,-88.441422,1.51)); +#231813 = DIRECTION('',(0.999999987761,-1.564575960791E-04,0.)); +#231814 = DIRECTION('',(-1.564575960791E-04,-0.999999987761,0.)); +#231815 = ADVANCED_FACE('',(#231816),#231841,.T.); +#231816 = FACE_BOUND('',#231817,.T.); +#231817 = EDGE_LOOP('',(#231818,#231819,#231827,#231835)); +#231818 = ORIENTED_EDGE('',*,*,#231797,.T.); +#231819 = ORIENTED_EDGE('',*,*,#231820,.T.); +#231820 = EDGE_CURVE('',#231790,#231821,#231823,.T.); +#231821 = VERTEX_POINT('',#231822); +#231822 = CARTESIAN_POINT('',(129.683147,-100.755557,1.545)); +#231823 = LINE('',#231824,#231825); +#231824 = CARTESIAN_POINT('',(129.698079,-100.719509,1.545)); +#231825 = VECTOR('',#231826,1.); +#231826 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231827 = ORIENTED_EDGE('',*,*,#231828,.F.); +#231828 = EDGE_CURVE('',#231829,#231821,#231831,.T.); +#231829 = VERTEX_POINT('',#231830); +#231830 = CARTESIAN_POINT('',(129.683147,-100.755557,1.51)); +#231831 = LINE('',#231832,#231833); +#231832 = CARTESIAN_POINT('',(129.683147,-100.755557,1.51)); +#231833 = VECTOR('',#231834,1.); +#231834 = DIRECTION('',(0.,0.,1.)); +#231835 = ORIENTED_EDGE('',*,*,#231836,.F.); +#231836 = EDGE_CURVE('',#231798,#231829,#231837,.T.); +#231837 = LINE('',#231838,#231839); +#231838 = CARTESIAN_POINT('',(129.698079,-100.719509,1.51)); +#231839 = VECTOR('',#231840,1.); +#231840 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231841 = PLANE('',#231842); +#231842 = AXIS2_PLACEMENT_3D('',#231843,#231844,#231845); +#231843 = CARTESIAN_POINT('',(129.698079,-100.719509,1.51)); +#231844 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#231845 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231846 = ADVANCED_FACE('',(#231847),#231872,.T.); +#231847 = FACE_BOUND('',#231848,.T.); +#231848 = EDGE_LOOP('',(#231849,#231850,#231858,#231866)); +#231849 = ORIENTED_EDGE('',*,*,#231828,.T.); +#231850 = ORIENTED_EDGE('',*,*,#231851,.T.); +#231851 = EDGE_CURVE('',#231821,#231852,#231854,.T.); +#231852 = VERTEX_POINT('',#231853); +#231853 = CARTESIAN_POINT('',(126.7,-103.741421,1.545)); +#231854 = LINE('',#231855,#231856); +#231855 = CARTESIAN_POINT('',(129.683147,-100.755557,1.545)); +#231856 = VECTOR('',#231857,1.); +#231857 = DIRECTION('',(-0.706784844072,-0.707428571794,0.)); +#231858 = ORIENTED_EDGE('',*,*,#231859,.F.); +#231859 = EDGE_CURVE('',#231860,#231852,#231862,.T.); +#231860 = VERTEX_POINT('',#231861); +#231861 = CARTESIAN_POINT('',(126.7,-103.741421,1.51)); +#231862 = LINE('',#231863,#231864); +#231863 = CARTESIAN_POINT('',(126.7,-103.741421,1.51)); +#231864 = VECTOR('',#231865,1.); +#231865 = DIRECTION('',(0.,0.,1.)); +#231866 = ORIENTED_EDGE('',*,*,#231867,.F.); +#231867 = EDGE_CURVE('',#231829,#231860,#231868,.T.); +#231868 = LINE('',#231869,#231870); +#231869 = CARTESIAN_POINT('',(129.683147,-100.755557,1.51)); +#231870 = VECTOR('',#231871,1.); +#231871 = DIRECTION('',(-0.706784844072,-0.707428571794,0.)); +#231872 = PLANE('',#231873); +#231873 = AXIS2_PLACEMENT_3D('',#231874,#231875,#231876); +#231874 = CARTESIAN_POINT('',(129.683147,-100.755557,1.51)); +#231875 = DIRECTION('',(0.707428571794,-0.706784844072,0.)); +#231876 = DIRECTION('',(-0.706784844072,-0.707428571794,0.)); +#231877 = ADVANCED_FACE('',(#231878),#231903,.T.); +#231878 = FACE_BOUND('',#231879,.T.); +#231879 = EDGE_LOOP('',(#231880,#231881,#231889,#231897)); +#231880 = ORIENTED_EDGE('',*,*,#231859,.T.); +#231881 = ORIENTED_EDGE('',*,*,#231882,.T.); +#231882 = EDGE_CURVE('',#231852,#231883,#231885,.T.); +#231883 = VERTEX_POINT('',#231884); +#231884 = CARTESIAN_POINT('',(126.698079,-114.719509,1.545)); +#231885 = LINE('',#231886,#231887); +#231886 = CARTESIAN_POINT('',(126.7,-103.741421,1.545)); +#231887 = VECTOR('',#231888,1.); +#231888 = DIRECTION('',(-1.749849309448E-04,-0.99999998469,0.)); +#231889 = ORIENTED_EDGE('',*,*,#231890,.F.); +#231890 = EDGE_CURVE('',#231891,#231883,#231893,.T.); +#231891 = VERTEX_POINT('',#231892); +#231892 = CARTESIAN_POINT('',(126.698079,-114.719509,1.51)); +#231893 = LINE('',#231894,#231895); +#231894 = CARTESIAN_POINT('',(126.698079,-114.719509,1.51)); +#231895 = VECTOR('',#231896,1.); +#231896 = DIRECTION('',(0.,0.,1.)); +#231897 = ORIENTED_EDGE('',*,*,#231898,.F.); +#231898 = EDGE_CURVE('',#231860,#231891,#231899,.T.); +#231899 = LINE('',#231900,#231901); +#231900 = CARTESIAN_POINT('',(126.7,-103.741421,1.51)); +#231901 = VECTOR('',#231902,1.); +#231902 = DIRECTION('',(-1.749849309448E-04,-0.99999998469,0.)); +#231903 = PLANE('',#231904); +#231904 = AXIS2_PLACEMENT_3D('',#231905,#231906,#231907); +#231905 = CARTESIAN_POINT('',(126.7,-103.741421,1.51)); +#231906 = DIRECTION('',(0.99999998469,-1.749849309448E-04,0.)); +#231907 = DIRECTION('',(-1.749849309448E-04,-0.99999998469,0.)); +#231908 = ADVANCED_FACE('',(#231909),#231934,.T.); +#231909 = FACE_BOUND('',#231910,.T.); +#231910 = EDGE_LOOP('',(#231911,#231912,#231920,#231928)); +#231911 = ORIENTED_EDGE('',*,*,#231890,.T.); +#231912 = ORIENTED_EDGE('',*,*,#231913,.T.); +#231913 = EDGE_CURVE('',#231883,#231914,#231916,.T.); +#231914 = VERTEX_POINT('',#231915); +#231915 = CARTESIAN_POINT('',(126.683147,-114.755557,1.545)); +#231916 = LINE('',#231917,#231918); +#231917 = CARTESIAN_POINT('',(126.698079,-114.719509,1.545)); +#231918 = VECTOR('',#231919,1.); +#231919 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231920 = ORIENTED_EDGE('',*,*,#231921,.F.); +#231921 = EDGE_CURVE('',#231922,#231914,#231924,.T.); +#231922 = VERTEX_POINT('',#231923); +#231923 = CARTESIAN_POINT('',(126.683147,-114.755557,1.51)); +#231924 = LINE('',#231925,#231926); +#231925 = CARTESIAN_POINT('',(126.683147,-114.755557,1.51)); +#231926 = VECTOR('',#231927,1.); +#231927 = DIRECTION('',(0.,0.,1.)); +#231928 = ORIENTED_EDGE('',*,*,#231929,.F.); +#231929 = EDGE_CURVE('',#231891,#231922,#231930,.T.); +#231930 = LINE('',#231931,#231932); +#231931 = CARTESIAN_POINT('',(126.698079,-114.719509,1.51)); +#231932 = VECTOR('',#231933,1.); +#231933 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231934 = PLANE('',#231935); +#231935 = AXIS2_PLACEMENT_3D('',#231936,#231937,#231938); +#231936 = CARTESIAN_POINT('',(126.698079,-114.719509,1.51)); +#231937 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#231938 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#231939 = ADVANCED_FACE('',(#231940),#231965,.T.); +#231940 = FACE_BOUND('',#231941,.T.); +#231941 = EDGE_LOOP('',(#231942,#231943,#231951,#231959)); +#231942 = ORIENTED_EDGE('',*,*,#231921,.T.); +#231943 = ORIENTED_EDGE('',*,*,#231944,.T.); +#231944 = EDGE_CURVE('',#231914,#231945,#231947,.T.); +#231945 = VERTEX_POINT('',#231946); +#231946 = CARTESIAN_POINT('',(122.2,-119.241422,1.545)); +#231947 = LINE('',#231948,#231949); +#231948 = CARTESIAN_POINT('',(126.683147,-114.755557,1.545)); +#231949 = VECTOR('',#231950,1.); +#231950 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#231951 = ORIENTED_EDGE('',*,*,#231952,.F.); +#231952 = EDGE_CURVE('',#231953,#231945,#231955,.T.); +#231953 = VERTEX_POINT('',#231954); +#231954 = CARTESIAN_POINT('',(122.2,-119.241422,1.51)); +#231955 = LINE('',#231956,#231957); +#231956 = CARTESIAN_POINT('',(122.2,-119.241422,1.51)); +#231957 = VECTOR('',#231958,1.); +#231958 = DIRECTION('',(0.,0.,1.)); +#231959 = ORIENTED_EDGE('',*,*,#231960,.F.); +#231960 = EDGE_CURVE('',#231922,#231953,#231961,.T.); +#231961 = LINE('',#231962,#231963); +#231962 = CARTESIAN_POINT('',(126.683147,-114.755557,1.51)); +#231963 = VECTOR('',#231964,1.); +#231964 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#231965 = PLANE('',#231966); +#231966 = AXIS2_PLACEMENT_3D('',#231967,#231968,#231969); +#231967 = CARTESIAN_POINT('',(126.683147,-114.755557,1.51)); +#231968 = DIRECTION('',(0.70732103276,-0.706892464676,0.)); +#231969 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#231970 = ADVANCED_FACE('',(#231971),#231996,.T.); +#231971 = FACE_BOUND('',#231972,.T.); +#231972 = EDGE_LOOP('',(#231973,#231974,#231982,#231990)); +#231973 = ORIENTED_EDGE('',*,*,#231952,.T.); +#231974 = ORIENTED_EDGE('',*,*,#231975,.T.); +#231975 = EDGE_CURVE('',#231945,#231976,#231978,.T.); +#231976 = VERTEX_POINT('',#231977); +#231977 = CARTESIAN_POINT('',(122.2,-134.158578,1.545)); +#231978 = LINE('',#231979,#231980); +#231979 = CARTESIAN_POINT('',(122.2,-119.241422,1.545)); +#231980 = VECTOR('',#231981,1.); +#231981 = DIRECTION('',(0.,-1.,0.)); +#231982 = ORIENTED_EDGE('',*,*,#231983,.F.); +#231983 = EDGE_CURVE('',#231984,#231976,#231986,.T.); +#231984 = VERTEX_POINT('',#231985); +#231985 = CARTESIAN_POINT('',(122.2,-134.158578,1.51)); +#231986 = LINE('',#231987,#231988); +#231987 = CARTESIAN_POINT('',(122.2,-134.158578,1.51)); +#231988 = VECTOR('',#231989,1.); +#231989 = DIRECTION('',(0.,0.,1.)); +#231990 = ORIENTED_EDGE('',*,*,#231991,.F.); +#231991 = EDGE_CURVE('',#231953,#231984,#231992,.T.); +#231992 = LINE('',#231993,#231994); +#231993 = CARTESIAN_POINT('',(122.2,-119.241422,1.51)); +#231994 = VECTOR('',#231995,1.); +#231995 = DIRECTION('',(0.,-1.,0.)); +#231996 = PLANE('',#231997); +#231997 = AXIS2_PLACEMENT_3D('',#231998,#231999,#232000); +#231998 = CARTESIAN_POINT('',(122.2,-119.241422,1.51)); +#231999 = DIRECTION('',(1.,0.,-0.)); +#232000 = DIRECTION('',(0.,-1.,0.)); +#232001 = ADVANCED_FACE('',(#232002),#232027,.T.); +#232002 = FACE_BOUND('',#232003,.T.); +#232003 = EDGE_LOOP('',(#232004,#232005,#232013,#232021)); +#232004 = ORIENTED_EDGE('',*,*,#231983,.T.); +#232005 = ORIENTED_EDGE('',*,*,#232006,.T.); +#232006 = EDGE_CURVE('',#231976,#232007,#232009,.T.); +#232007 = VERTEX_POINT('',#232008); +#232008 = CARTESIAN_POINT('',(124.041422,-136.,1.545)); +#232009 = LINE('',#232010,#232011); +#232010 = CARTESIAN_POINT('',(122.2,-134.158578,1.545)); +#232011 = VECTOR('',#232012,1.); +#232012 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232013 = ORIENTED_EDGE('',*,*,#232014,.F.); +#232014 = EDGE_CURVE('',#232015,#232007,#232017,.T.); +#232015 = VERTEX_POINT('',#232016); +#232016 = CARTESIAN_POINT('',(124.041422,-136.,1.51)); +#232017 = LINE('',#232018,#232019); +#232018 = CARTESIAN_POINT('',(124.041422,-136.,1.51)); +#232019 = VECTOR('',#232020,1.); +#232020 = DIRECTION('',(0.,0.,1.)); +#232021 = ORIENTED_EDGE('',*,*,#232022,.F.); +#232022 = EDGE_CURVE('',#231984,#232015,#232023,.T.); +#232023 = LINE('',#232024,#232025); +#232024 = CARTESIAN_POINT('',(122.2,-134.158578,1.51)); +#232025 = VECTOR('',#232026,1.); +#232026 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232027 = PLANE('',#232028); +#232028 = AXIS2_PLACEMENT_3D('',#232029,#232030,#232031); +#232029 = CARTESIAN_POINT('',(122.2,-134.158578,1.51)); +#232030 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#232031 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232032 = ADVANCED_FACE('',(#232033),#232058,.T.); +#232033 = FACE_BOUND('',#232034,.T.); +#232034 = EDGE_LOOP('',(#232035,#232036,#232044,#232052)); +#232035 = ORIENTED_EDGE('',*,*,#232014,.T.); +#232036 = ORIENTED_EDGE('',*,*,#232037,.T.); +#232037 = EDGE_CURVE('',#232007,#232038,#232040,.T.); +#232038 = VERTEX_POINT('',#232039); +#232039 = CARTESIAN_POINT('',(130.055643,-136.001921,1.545)); +#232040 = LINE('',#232041,#232042); +#232041 = CARTESIAN_POINT('',(124.041422,-136.,1.545)); +#232042 = VECTOR('',#232043,1.); +#232043 = DIRECTION('',(0.999999948989,-3.194095963579E-04,0.)); +#232044 = ORIENTED_EDGE('',*,*,#232045,.F.); +#232045 = EDGE_CURVE('',#232046,#232038,#232048,.T.); +#232046 = VERTEX_POINT('',#232047); +#232047 = CARTESIAN_POINT('',(130.055643,-136.001921,1.51)); +#232048 = LINE('',#232049,#232050); +#232049 = CARTESIAN_POINT('',(130.055643,-136.001921,1.51)); +#232050 = VECTOR('',#232051,1.); +#232051 = DIRECTION('',(0.,0.,1.)); +#232052 = ORIENTED_EDGE('',*,*,#232053,.F.); +#232053 = EDGE_CURVE('',#232015,#232046,#232054,.T.); +#232054 = LINE('',#232055,#232056); +#232055 = CARTESIAN_POINT('',(124.041422,-136.,1.51)); +#232056 = VECTOR('',#232057,1.); +#232057 = DIRECTION('',(0.999999948989,-3.194095963579E-04,0.)); +#232058 = PLANE('',#232059); +#232059 = AXIS2_PLACEMENT_3D('',#232060,#232061,#232062); +#232060 = CARTESIAN_POINT('',(124.041422,-136.,1.51)); +#232061 = DIRECTION('',(3.194095963579E-04,0.999999948989,-0.)); +#232062 = DIRECTION('',(0.999999948989,-3.194095963579E-04,0.)); +#232063 = ADVANCED_FACE('',(#232064),#232089,.T.); +#232064 = FACE_BOUND('',#232065,.T.); +#232065 = EDGE_LOOP('',(#232066,#232067,#232075,#232083)); +#232066 = ORIENTED_EDGE('',*,*,#232045,.T.); +#232067 = ORIENTED_EDGE('',*,*,#232068,.T.); +#232068 = EDGE_CURVE('',#232038,#232069,#232071,.T.); +#232069 = VERTEX_POINT('',#232070); +#232070 = CARTESIAN_POINT('',(130.091691,-136.016853,1.545)); +#232071 = LINE('',#232072,#232073); +#232072 = CARTESIAN_POINT('',(130.055643,-136.001921,1.545)); +#232073 = VECTOR('',#232074,1.); +#232074 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#232075 = ORIENTED_EDGE('',*,*,#232076,.F.); +#232076 = EDGE_CURVE('',#232077,#232069,#232079,.T.); +#232077 = VERTEX_POINT('',#232078); +#232078 = CARTESIAN_POINT('',(130.091691,-136.016853,1.51)); +#232079 = LINE('',#232080,#232081); +#232080 = CARTESIAN_POINT('',(130.091691,-136.016853,1.51)); +#232081 = VECTOR('',#232082,1.); +#232082 = DIRECTION('',(0.,0.,1.)); +#232083 = ORIENTED_EDGE('',*,*,#232084,.F.); +#232084 = EDGE_CURVE('',#232046,#232077,#232085,.T.); +#232085 = LINE('',#232086,#232087); +#232086 = CARTESIAN_POINT('',(130.055643,-136.001921,1.51)); +#232087 = VECTOR('',#232088,1.); +#232088 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#232089 = PLANE('',#232090); +#232090 = AXIS2_PLACEMENT_3D('',#232091,#232092,#232093); +#232091 = CARTESIAN_POINT('',(130.055643,-136.001921,1.51)); +#232092 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#232093 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#232094 = ADVANCED_FACE('',(#232095),#232120,.T.); +#232095 = FACE_BOUND('',#232096,.T.); +#232096 = EDGE_LOOP('',(#232097,#232098,#232106,#232114)); +#232097 = ORIENTED_EDGE('',*,*,#232076,.T.); +#232098 = ORIENTED_EDGE('',*,*,#232099,.T.); +#232099 = EDGE_CURVE('',#232069,#232100,#232102,.T.); +#232100 = VERTEX_POINT('',#232101); +#232101 = CARTESIAN_POINT('',(143.098647,-149.023809,1.545)); +#232102 = LINE('',#232103,#232104); +#232103 = CARTESIAN_POINT('',(130.091691,-136.016853,1.545)); +#232104 = VECTOR('',#232105,1.); +#232105 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232106 = ORIENTED_EDGE('',*,*,#232107,.F.); +#232107 = EDGE_CURVE('',#232108,#232100,#232110,.T.); +#232108 = VERTEX_POINT('',#232109); +#232109 = CARTESIAN_POINT('',(143.098647,-149.023809,1.51)); +#232110 = LINE('',#232111,#232112); +#232111 = CARTESIAN_POINT('',(143.098647,-149.023809,1.51)); +#232112 = VECTOR('',#232113,1.); +#232113 = DIRECTION('',(0.,0.,1.)); +#232114 = ORIENTED_EDGE('',*,*,#232115,.F.); +#232115 = EDGE_CURVE('',#232077,#232108,#232116,.T.); +#232116 = LINE('',#232117,#232118); +#232117 = CARTESIAN_POINT('',(130.091691,-136.016853,1.51)); +#232118 = VECTOR('',#232119,1.); +#232119 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232120 = PLANE('',#232121); +#232121 = AXIS2_PLACEMENT_3D('',#232122,#232123,#232124); +#232122 = CARTESIAN_POINT('',(130.091691,-136.016853,1.51)); +#232123 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#232124 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#232125 = ADVANCED_FACE('',(#232126),#232151,.T.); +#232126 = FACE_BOUND('',#232127,.T.); +#232127 = EDGE_LOOP('',(#232128,#232129,#232137,#232145)); +#232128 = ORIENTED_EDGE('',*,*,#232107,.T.); +#232129 = ORIENTED_EDGE('',*,*,#232130,.T.); +#232130 = EDGE_CURVE('',#232100,#232131,#232133,.T.); +#232131 = VERTEX_POINT('',#232132); +#232132 = CARTESIAN_POINT('',(143.113579,-149.059857,1.545)); +#232133 = LINE('',#232134,#232135); +#232134 = CARTESIAN_POINT('',(143.098647,-149.023809,1.545)); +#232135 = VECTOR('',#232136,1.); +#232136 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#232137 = ORIENTED_EDGE('',*,*,#232138,.F.); +#232138 = EDGE_CURVE('',#232139,#232131,#232141,.T.); +#232139 = VERTEX_POINT('',#232140); +#232140 = CARTESIAN_POINT('',(143.113579,-149.059857,1.51)); +#232141 = LINE('',#232142,#232143); +#232142 = CARTESIAN_POINT('',(143.113579,-149.059857,1.51)); +#232143 = VECTOR('',#232144,1.); +#232144 = DIRECTION('',(0.,0.,1.)); +#232145 = ORIENTED_EDGE('',*,*,#232146,.F.); +#232146 = EDGE_CURVE('',#232108,#232139,#232147,.T.); +#232147 = LINE('',#232148,#232149); +#232148 = CARTESIAN_POINT('',(143.098647,-149.023809,1.51)); +#232149 = VECTOR('',#232150,1.); +#232150 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#232151 = PLANE('',#232152); +#232152 = AXIS2_PLACEMENT_3D('',#232153,#232154,#232155); +#232153 = CARTESIAN_POINT('',(143.098647,-149.023809,1.51)); +#232154 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#232155 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#232156 = ADVANCED_FACE('',(#232157),#232182,.T.); +#232157 = FACE_BOUND('',#232158,.T.); +#232158 = EDGE_LOOP('',(#232159,#232160,#232168,#232176)); +#232159 = ORIENTED_EDGE('',*,*,#232138,.T.); +#232160 = ORIENTED_EDGE('',*,*,#232161,.T.); +#232161 = EDGE_CURVE('',#232131,#232162,#232164,.T.); +#232162 = VERTEX_POINT('',#232163); +#232163 = CARTESIAN_POINT('',(143.113579,-149.940143,1.545)); +#232164 = LINE('',#232165,#232166); +#232165 = CARTESIAN_POINT('',(143.113579,-149.059857,1.545)); +#232166 = VECTOR('',#232167,1.); +#232167 = DIRECTION('',(0.,-1.,0.)); +#232168 = ORIENTED_EDGE('',*,*,#232169,.F.); +#232169 = EDGE_CURVE('',#232170,#232162,#232172,.T.); +#232170 = VERTEX_POINT('',#232171); +#232171 = CARTESIAN_POINT('',(143.113579,-149.940143,1.51)); +#232172 = LINE('',#232173,#232174); +#232173 = CARTESIAN_POINT('',(143.113579,-149.940143,1.51)); +#232174 = VECTOR('',#232175,1.); +#232175 = DIRECTION('',(0.,0.,1.)); +#232176 = ORIENTED_EDGE('',*,*,#232177,.F.); +#232177 = EDGE_CURVE('',#232139,#232170,#232178,.T.); +#232178 = LINE('',#232179,#232180); +#232179 = CARTESIAN_POINT('',(143.113579,-149.059857,1.51)); +#232180 = VECTOR('',#232181,1.); +#232181 = DIRECTION('',(0.,-1.,0.)); +#232182 = PLANE('',#232183); +#232183 = AXIS2_PLACEMENT_3D('',#232184,#232185,#232186); +#232184 = CARTESIAN_POINT('',(143.113579,-149.059857,1.51)); +#232185 = DIRECTION('',(1.,0.,-0.)); +#232186 = DIRECTION('',(0.,-1.,0.)); +#232187 = ADVANCED_FACE('',(#232188),#232213,.T.); +#232188 = FACE_BOUND('',#232189,.T.); +#232189 = EDGE_LOOP('',(#232190,#232191,#232199,#232207)); +#232190 = ORIENTED_EDGE('',*,*,#232169,.T.); +#232191 = ORIENTED_EDGE('',*,*,#232192,.T.); +#232192 = EDGE_CURVE('',#232162,#232193,#232195,.T.); +#232193 = VERTEX_POINT('',#232194); +#232194 = CARTESIAN_POINT('',(143.098647,-149.976192,1.545)); +#232195 = LINE('',#232196,#232197); +#232196 = CARTESIAN_POINT('',(143.113579,-149.940143,1.545)); +#232197 = VECTOR('',#232198,1.); +#232198 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#232199 = ORIENTED_EDGE('',*,*,#232200,.F.); +#232200 = EDGE_CURVE('',#232201,#232193,#232203,.T.); +#232201 = VERTEX_POINT('',#232202); +#232202 = CARTESIAN_POINT('',(143.098647,-149.976192,1.51)); +#232203 = LINE('',#232204,#232205); +#232204 = CARTESIAN_POINT('',(143.098647,-149.976192,1.51)); +#232205 = VECTOR('',#232206,1.); +#232206 = DIRECTION('',(0.,0.,1.)); +#232207 = ORIENTED_EDGE('',*,*,#232208,.F.); +#232208 = EDGE_CURVE('',#232170,#232201,#232209,.T.); +#232209 = LINE('',#232210,#232211); +#232210 = CARTESIAN_POINT('',(143.113579,-149.940143,1.51)); +#232211 = VECTOR('',#232212,1.); +#232212 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#232213 = PLANE('',#232214); +#232214 = AXIS2_PLACEMENT_3D('',#232215,#232216,#232217); +#232215 = CARTESIAN_POINT('',(143.113579,-149.940143,1.51)); +#232216 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#232217 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#232218 = ADVANCED_FACE('',(#232219),#232244,.T.); +#232219 = FACE_BOUND('',#232220,.T.); +#232220 = EDGE_LOOP('',(#232221,#232222,#232230,#232238)); +#232221 = ORIENTED_EDGE('',*,*,#232200,.T.); +#232222 = ORIENTED_EDGE('',*,*,#232223,.T.); +#232223 = EDGE_CURVE('',#232193,#232224,#232226,.T.); +#232224 = VERTEX_POINT('',#232225); +#232225 = CARTESIAN_POINT('',(142.191691,-150.883147,1.545)); +#232226 = LINE('',#232227,#232228); +#232227 = CARTESIAN_POINT('',(143.098647,-149.976192,1.545)); +#232228 = VECTOR('',#232229,1.); +#232229 = DIRECTION('',(-0.707107171011,-0.707106391362,0.)); +#232230 = ORIENTED_EDGE('',*,*,#232231,.F.); +#232231 = EDGE_CURVE('',#232232,#232224,#232234,.T.); +#232232 = VERTEX_POINT('',#232233); +#232233 = CARTESIAN_POINT('',(142.191691,-150.883147,1.51)); +#232234 = LINE('',#232235,#232236); +#232235 = CARTESIAN_POINT('',(142.191691,-150.883147,1.51)); +#232236 = VECTOR('',#232237,1.); +#232237 = DIRECTION('',(0.,0.,1.)); +#232238 = ORIENTED_EDGE('',*,*,#232239,.F.); +#232239 = EDGE_CURVE('',#232201,#232232,#232240,.T.); +#232240 = LINE('',#232241,#232242); +#232241 = CARTESIAN_POINT('',(143.098647,-149.976192,1.51)); +#232242 = VECTOR('',#232243,1.); +#232243 = DIRECTION('',(-0.707107171011,-0.707106391362,0.)); +#232244 = PLANE('',#232245); +#232245 = AXIS2_PLACEMENT_3D('',#232246,#232247,#232248); +#232246 = CARTESIAN_POINT('',(143.098647,-149.976192,1.51)); +#232247 = DIRECTION('',(0.707106391362,-0.707107171011,0.)); +#232248 = DIRECTION('',(-0.707107171011,-0.707106391362,0.)); +#232249 = ADVANCED_FACE('',(#232250),#232275,.T.); +#232250 = FACE_BOUND('',#232251,.T.); +#232251 = EDGE_LOOP('',(#232252,#232253,#232261,#232269)); +#232252 = ORIENTED_EDGE('',*,*,#232231,.T.); +#232253 = ORIENTED_EDGE('',*,*,#232254,.T.); +#232254 = EDGE_CURVE('',#232224,#232255,#232257,.T.); +#232255 = VERTEX_POINT('',#232256); +#232256 = CARTESIAN_POINT('',(142.155643,-150.898079,1.545)); +#232257 = LINE('',#232258,#232259); +#232258 = CARTESIAN_POINT('',(142.191691,-150.883147,1.545)); +#232259 = VECTOR('',#232260,1.); +#232260 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#232261 = ORIENTED_EDGE('',*,*,#232262,.F.); +#232262 = EDGE_CURVE('',#232263,#232255,#232265,.T.); +#232263 = VERTEX_POINT('',#232264); +#232264 = CARTESIAN_POINT('',(142.155643,-150.898079,1.51)); +#232265 = LINE('',#232266,#232267); +#232266 = CARTESIAN_POINT('',(142.155643,-150.898079,1.51)); +#232267 = VECTOR('',#232268,1.); +#232268 = DIRECTION('',(0.,0.,1.)); +#232269 = ORIENTED_EDGE('',*,*,#232270,.F.); +#232270 = EDGE_CURVE('',#232232,#232263,#232271,.T.); +#232271 = LINE('',#232272,#232273); +#232272 = CARTESIAN_POINT('',(142.191691,-150.883147,1.51)); +#232273 = VECTOR('',#232274,1.); +#232274 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#232275 = PLANE('',#232276); +#232276 = AXIS2_PLACEMENT_3D('',#232277,#232278,#232279); +#232277 = CARTESIAN_POINT('',(142.191691,-150.883147,1.51)); +#232278 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#232279 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#232280 = ADVANCED_FACE('',(#232281),#232306,.T.); +#232281 = FACE_BOUND('',#232282,.T.); +#232282 = EDGE_LOOP('',(#232283,#232284,#232292,#232300)); +#232283 = ORIENTED_EDGE('',*,*,#232262,.T.); +#232284 = ORIENTED_EDGE('',*,*,#232285,.T.); +#232285 = EDGE_CURVE('',#232255,#232286,#232288,.T.); +#232286 = VERTEX_POINT('',#232287); +#232287 = CARTESIAN_POINT('',(125.280491,-150.898079,1.545)); +#232288 = LINE('',#232289,#232290); +#232289 = CARTESIAN_POINT('',(142.155643,-150.898079,1.545)); +#232290 = VECTOR('',#232291,1.); +#232291 = DIRECTION('',(-1.,0.,0.)); +#232292 = ORIENTED_EDGE('',*,*,#232293,.F.); +#232293 = EDGE_CURVE('',#232294,#232286,#232296,.T.); +#232294 = VERTEX_POINT('',#232295); +#232295 = CARTESIAN_POINT('',(125.280491,-150.898079,1.51)); +#232296 = LINE('',#232297,#232298); +#232297 = CARTESIAN_POINT('',(125.280491,-150.898079,1.51)); +#232298 = VECTOR('',#232299,1.); +#232299 = DIRECTION('',(0.,0.,1.)); +#232300 = ORIENTED_EDGE('',*,*,#232301,.F.); +#232301 = EDGE_CURVE('',#232263,#232294,#232302,.T.); +#232302 = LINE('',#232303,#232304); +#232303 = CARTESIAN_POINT('',(142.155643,-150.898079,1.51)); +#232304 = VECTOR('',#232305,1.); +#232305 = DIRECTION('',(-1.,0.,0.)); +#232306 = PLANE('',#232307); +#232307 = AXIS2_PLACEMENT_3D('',#232308,#232309,#232310); +#232308 = CARTESIAN_POINT('',(142.155643,-150.898079,1.51)); +#232309 = DIRECTION('',(0.,-1.,0.)); +#232310 = DIRECTION('',(-1.,0.,0.)); +#232311 = ADVANCED_FACE('',(#232312),#232337,.T.); +#232312 = FACE_BOUND('',#232313,.T.); +#232313 = EDGE_LOOP('',(#232314,#232315,#232323,#232331)); +#232314 = ORIENTED_EDGE('',*,*,#232293,.T.); +#232315 = ORIENTED_EDGE('',*,*,#232316,.T.); +#232316 = EDGE_CURVE('',#232286,#232317,#232319,.T.); +#232317 = VERTEX_POINT('',#232318); +#232318 = CARTESIAN_POINT('',(125.244443,-150.883148,1.545)); +#232319 = LINE('',#232320,#232321); +#232320 = CARTESIAN_POINT('',(125.280491,-150.898079,1.545)); +#232321 = VECTOR('',#232322,1.); +#232322 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#232323 = ORIENTED_EDGE('',*,*,#232324,.F.); +#232324 = EDGE_CURVE('',#232325,#232317,#232327,.T.); +#232325 = VERTEX_POINT('',#232326); +#232326 = CARTESIAN_POINT('',(125.244443,-150.883148,1.51)); +#232327 = LINE('',#232328,#232329); +#232328 = CARTESIAN_POINT('',(125.244443,-150.883148,1.51)); +#232329 = VECTOR('',#232330,1.); +#232330 = DIRECTION('',(0.,0.,1.)); +#232331 = ORIENTED_EDGE('',*,*,#232332,.F.); +#232332 = EDGE_CURVE('',#232294,#232325,#232333,.T.); +#232333 = LINE('',#232334,#232335); +#232334 = CARTESIAN_POINT('',(125.280491,-150.898079,1.51)); +#232335 = VECTOR('',#232336,1.); +#232336 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#232337 = PLANE('',#232338); +#232338 = AXIS2_PLACEMENT_3D('',#232339,#232340,#232341); +#232339 = CARTESIAN_POINT('',(125.280491,-150.898079,1.51)); +#232340 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#232341 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#232342 = ADVANCED_FACE('',(#232343),#232368,.T.); +#232343 = FACE_BOUND('',#232344,.T.); +#232344 = EDGE_LOOP('',(#232345,#232346,#232354,#232362)); +#232345 = ORIENTED_EDGE('',*,*,#232324,.T.); +#232346 = ORIENTED_EDGE('',*,*,#232347,.T.); +#232347 = EDGE_CURVE('',#232317,#232348,#232350,.T.); +#232348 = VERTEX_POINT('',#232349); +#232349 = CARTESIAN_POINT('',(124.236776,-149.87548,1.545)); +#232350 = LINE('',#232351,#232352); +#232351 = CARTESIAN_POINT('',(125.244443,-150.883148,1.545)); +#232352 = VECTOR('',#232353,1.); +#232353 = DIRECTION('',(-0.707106430323,0.70710713205,0.)); +#232354 = ORIENTED_EDGE('',*,*,#232355,.F.); +#232355 = EDGE_CURVE('',#232356,#232348,#232358,.T.); +#232356 = VERTEX_POINT('',#232357); +#232357 = CARTESIAN_POINT('',(124.236776,-149.87548,1.51)); +#232358 = LINE('',#232359,#232360); +#232359 = CARTESIAN_POINT('',(124.236776,-149.87548,1.51)); +#232360 = VECTOR('',#232361,1.); +#232361 = DIRECTION('',(0.,0.,1.)); +#232362 = ORIENTED_EDGE('',*,*,#232363,.F.); +#232363 = EDGE_CURVE('',#232325,#232356,#232364,.T.); +#232364 = LINE('',#232365,#232366); +#232365 = CARTESIAN_POINT('',(125.244443,-150.883148,1.51)); +#232366 = VECTOR('',#232367,1.); +#232367 = DIRECTION('',(-0.707106430323,0.70710713205,0.)); +#232368 = PLANE('',#232369); +#232369 = AXIS2_PLACEMENT_3D('',#232370,#232371,#232372); +#232370 = CARTESIAN_POINT('',(125.244443,-150.883148,1.51)); +#232371 = DIRECTION('',(-0.70710713205,-0.707106430323,0.)); +#232372 = DIRECTION('',(-0.707106430323,0.70710713205,0.)); +#232373 = ADVANCED_FACE('',(#232374),#232401,.F.); +#232374 = FACE_BOUND('',#232375,.T.); +#232375 = EDGE_LOOP('',(#232376,#232377,#232386,#232394)); +#232376 = ORIENTED_EDGE('',*,*,#232355,.T.); +#232377 = ORIENTED_EDGE('',*,*,#232378,.T.); +#232378 = EDGE_CURVE('',#232348,#232379,#232381,.T.); +#232379 = VERTEX_POINT('',#232380); +#232380 = CARTESIAN_POINT('',(124.375728,-149.736347,1.545)); +#232381 = CIRCLE('',#232382,0.303157658912); +#232382 = AXIS2_PLACEMENT_3D('',#232383,#232384,#232385); +#232383 = CARTESIAN_POINT('',(124.10334166515,-149.6032671339,1.545)); +#232384 = DIRECTION('',(0.,0.,1.)); +#232385 = DIRECTION('',(0.44014832191,-0.897925083022,0.)); +#232386 = ORIENTED_EDGE('',*,*,#232387,.F.); +#232387 = EDGE_CURVE('',#232388,#232379,#232390,.T.); +#232388 = VERTEX_POINT('',#232389); +#232389 = CARTESIAN_POINT('',(124.375728,-149.736347,1.51)); +#232390 = LINE('',#232391,#232392); +#232391 = CARTESIAN_POINT('',(124.375728,-149.736347,1.51)); +#232392 = VECTOR('',#232393,1.); +#232393 = DIRECTION('',(0.,0.,1.)); +#232394 = ORIENTED_EDGE('',*,*,#232395,.F.); +#232395 = EDGE_CURVE('',#232356,#232388,#232396,.T.); +#232396 = CIRCLE('',#232397,0.303157658912); +#232397 = AXIS2_PLACEMENT_3D('',#232398,#232399,#232400); +#232398 = CARTESIAN_POINT('',(124.10334166515,-149.6032671339,1.51)); +#232399 = DIRECTION('',(0.,0.,1.)); +#232400 = DIRECTION('',(0.44014832191,-0.897925083022,0.)); +#232401 = CYLINDRICAL_SURFACE('',#232402,0.303157658912); +#232402 = AXIS2_PLACEMENT_3D('',#232403,#232404,#232405); +#232403 = CARTESIAN_POINT('',(124.10334166515,-149.6032671339,1.51)); +#232404 = DIRECTION('',(-0.,-0.,-1.)); +#232405 = DIRECTION('',(0.44014832191,-0.897925083022,0.)); +#232406 = ADVANCED_FACE('',(#232407),#232432,.T.); +#232407 = FACE_BOUND('',#232408,.T.); +#232408 = EDGE_LOOP('',(#232409,#232410,#232418,#232426)); +#232409 = ORIENTED_EDGE('',*,*,#232387,.T.); +#232410 = ORIENTED_EDGE('',*,*,#232411,.T.); +#232411 = EDGE_CURVE('',#232379,#232412,#232414,.T.); +#232412 = VERTEX_POINT('',#232413); +#232413 = CARTESIAN_POINT('',(125.341421,-150.7,1.545)); +#232414 = LINE('',#232415,#232416); +#232415 = CARTESIAN_POINT('',(124.375728,-149.736347,1.545)); +#232416 = VECTOR('',#232417,1.); +#232417 = DIRECTION('',(0.707854047054,-0.706358724777,0.)); +#232418 = ORIENTED_EDGE('',*,*,#232419,.F.); +#232419 = EDGE_CURVE('',#232420,#232412,#232422,.T.); +#232420 = VERTEX_POINT('',#232421); +#232421 = CARTESIAN_POINT('',(125.341421,-150.7,1.51)); +#232422 = LINE('',#232423,#232424); +#232423 = CARTESIAN_POINT('',(125.341421,-150.7,1.51)); +#232424 = VECTOR('',#232425,1.); +#232425 = DIRECTION('',(0.,0.,1.)); +#232426 = ORIENTED_EDGE('',*,*,#232427,.F.); +#232427 = EDGE_CURVE('',#232388,#232420,#232428,.T.); +#232428 = LINE('',#232429,#232430); +#232429 = CARTESIAN_POINT('',(124.375728,-149.736347,1.51)); +#232430 = VECTOR('',#232431,1.); +#232431 = DIRECTION('',(0.707854047054,-0.706358724777,0.)); +#232432 = PLANE('',#232433); +#232433 = AXIS2_PLACEMENT_3D('',#232434,#232435,#232436); +#232434 = CARTESIAN_POINT('',(124.375728,-149.736347,1.51)); +#232435 = DIRECTION('',(0.706358724777,0.707854047054,-0.)); +#232436 = DIRECTION('',(0.707854047054,-0.706358724777,0.)); +#232437 = ADVANCED_FACE('',(#232438),#232463,.T.); +#232438 = FACE_BOUND('',#232439,.T.); +#232439 = EDGE_LOOP('',(#232440,#232441,#232449,#232457)); +#232440 = ORIENTED_EDGE('',*,*,#232419,.T.); +#232441 = ORIENTED_EDGE('',*,*,#232442,.T.); +#232442 = EDGE_CURVE('',#232412,#232443,#232445,.T.); +#232443 = VERTEX_POINT('',#232444); +#232444 = CARTESIAN_POINT('',(142.094712,-150.7,1.545)); +#232445 = LINE('',#232446,#232447); +#232446 = CARTESIAN_POINT('',(125.341421,-150.7,1.545)); +#232447 = VECTOR('',#232448,1.); +#232448 = DIRECTION('',(1.,0.,0.)); +#232449 = ORIENTED_EDGE('',*,*,#232450,.F.); +#232450 = EDGE_CURVE('',#232451,#232443,#232453,.T.); +#232451 = VERTEX_POINT('',#232452); +#232452 = CARTESIAN_POINT('',(142.094712,-150.7,1.51)); +#232453 = LINE('',#232454,#232455); +#232454 = CARTESIAN_POINT('',(142.094712,-150.7,1.51)); +#232455 = VECTOR('',#232456,1.); +#232456 = DIRECTION('',(0.,0.,1.)); +#232457 = ORIENTED_EDGE('',*,*,#232458,.F.); +#232458 = EDGE_CURVE('',#232420,#232451,#232459,.T.); +#232459 = LINE('',#232460,#232461); +#232460 = CARTESIAN_POINT('',(125.341421,-150.7,1.51)); +#232461 = VECTOR('',#232462,1.); +#232462 = DIRECTION('',(1.,0.,0.)); +#232463 = PLANE('',#232464); +#232464 = AXIS2_PLACEMENT_3D('',#232465,#232466,#232467); +#232465 = CARTESIAN_POINT('',(125.341421,-150.7,1.51)); +#232466 = DIRECTION('',(0.,1.,0.)); +#232467 = DIRECTION('',(1.,0.,0.)); +#232468 = ADVANCED_FACE('',(#232469),#232494,.T.); +#232469 = FACE_BOUND('',#232470,.T.); +#232470 = EDGE_LOOP('',(#232471,#232472,#232480,#232488)); +#232471 = ORIENTED_EDGE('',*,*,#232450,.T.); +#232472 = ORIENTED_EDGE('',*,*,#232473,.T.); +#232473 = EDGE_CURVE('',#232443,#232474,#232476,.T.); +#232474 = VERTEX_POINT('',#232475); +#232475 = CARTESIAN_POINT('',(142.9155,-149.879212,1.545)); +#232476 = LINE('',#232477,#232478); +#232477 = CARTESIAN_POINT('',(142.094712,-150.7,1.545)); +#232478 = VECTOR('',#232479,1.); +#232479 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#232480 = ORIENTED_EDGE('',*,*,#232481,.F.); +#232481 = EDGE_CURVE('',#232482,#232474,#232484,.T.); +#232482 = VERTEX_POINT('',#232483); +#232483 = CARTESIAN_POINT('',(142.9155,-149.879212,1.51)); +#232484 = LINE('',#232485,#232486); +#232485 = CARTESIAN_POINT('',(142.9155,-149.879212,1.51)); +#232486 = VECTOR('',#232487,1.); +#232487 = DIRECTION('',(0.,0.,1.)); +#232488 = ORIENTED_EDGE('',*,*,#232489,.F.); +#232489 = EDGE_CURVE('',#232451,#232482,#232490,.T.); +#232490 = LINE('',#232491,#232492); +#232491 = CARTESIAN_POINT('',(142.094712,-150.7,1.51)); +#232492 = VECTOR('',#232493,1.); +#232493 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#232494 = PLANE('',#232495); +#232495 = AXIS2_PLACEMENT_3D('',#232496,#232497,#232498); +#232496 = CARTESIAN_POINT('',(142.094712,-150.7,1.51)); +#232497 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232498 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#232499 = ADVANCED_FACE('',(#232500),#232525,.T.); +#232500 = FACE_BOUND('',#232501,.T.); +#232501 = EDGE_LOOP('',(#232502,#232503,#232511,#232519)); +#232502 = ORIENTED_EDGE('',*,*,#232481,.T.); +#232503 = ORIENTED_EDGE('',*,*,#232504,.T.); +#232504 = EDGE_CURVE('',#232474,#232505,#232507,.T.); +#232505 = VERTEX_POINT('',#232506); +#232506 = CARTESIAN_POINT('',(142.9155,-149.120787,1.545)); +#232507 = LINE('',#232508,#232509); +#232508 = CARTESIAN_POINT('',(142.9155,-149.879212,1.545)); +#232509 = VECTOR('',#232510,1.); +#232510 = DIRECTION('',(0.,1.,0.)); +#232511 = ORIENTED_EDGE('',*,*,#232512,.F.); +#232512 = EDGE_CURVE('',#232513,#232505,#232515,.T.); +#232513 = VERTEX_POINT('',#232514); +#232514 = CARTESIAN_POINT('',(142.9155,-149.120787,1.51)); +#232515 = LINE('',#232516,#232517); +#232516 = CARTESIAN_POINT('',(142.9155,-149.120787,1.51)); +#232517 = VECTOR('',#232518,1.); +#232518 = DIRECTION('',(0.,0.,1.)); +#232519 = ORIENTED_EDGE('',*,*,#232520,.F.); +#232520 = EDGE_CURVE('',#232482,#232513,#232521,.T.); +#232521 = LINE('',#232522,#232523); +#232522 = CARTESIAN_POINT('',(142.9155,-149.879212,1.51)); +#232523 = VECTOR('',#232524,1.); +#232524 = DIRECTION('',(0.,1.,0.)); +#232525 = PLANE('',#232526); +#232526 = AXIS2_PLACEMENT_3D('',#232527,#232528,#232529); +#232527 = CARTESIAN_POINT('',(142.9155,-149.879212,1.51)); +#232528 = DIRECTION('',(-1.,0.,0.)); +#232529 = DIRECTION('',(0.,1.,0.)); +#232530 = ADVANCED_FACE('',(#232531),#232556,.T.); +#232531 = FACE_BOUND('',#232532,.T.); +#232532 = EDGE_LOOP('',(#232533,#232534,#232542,#232550)); +#232533 = ORIENTED_EDGE('',*,*,#232512,.T.); +#232534 = ORIENTED_EDGE('',*,*,#232535,.T.); +#232535 = EDGE_CURVE('',#232505,#232536,#232538,.T.); +#232536 = VERTEX_POINT('',#232537); +#232537 = CARTESIAN_POINT('',(129.994712,-136.2,1.545)); +#232538 = LINE('',#232539,#232540); +#232539 = CARTESIAN_POINT('',(142.9155,-149.120787,1.545)); +#232540 = VECTOR('',#232541,1.); +#232541 = DIRECTION('',(-0.70710680855,0.707106753823,0.)); +#232542 = ORIENTED_EDGE('',*,*,#232543,.F.); +#232543 = EDGE_CURVE('',#232544,#232536,#232546,.T.); +#232544 = VERTEX_POINT('',#232545); +#232545 = CARTESIAN_POINT('',(129.994712,-136.2,1.51)); +#232546 = LINE('',#232547,#232548); +#232547 = CARTESIAN_POINT('',(129.994712,-136.2,1.51)); +#232548 = VECTOR('',#232549,1.); +#232549 = DIRECTION('',(0.,0.,1.)); +#232550 = ORIENTED_EDGE('',*,*,#232551,.F.); +#232551 = EDGE_CURVE('',#232513,#232544,#232552,.T.); +#232552 = LINE('',#232553,#232554); +#232553 = CARTESIAN_POINT('',(142.9155,-149.120787,1.51)); +#232554 = VECTOR('',#232555,1.); +#232555 = DIRECTION('',(-0.70710680855,0.707106753823,0.)); +#232556 = PLANE('',#232557); +#232557 = AXIS2_PLACEMENT_3D('',#232558,#232559,#232560); +#232558 = CARTESIAN_POINT('',(142.9155,-149.120787,1.51)); +#232559 = DIRECTION('',(-0.707106753823,-0.70710680855,0.)); +#232560 = DIRECTION('',(-0.70710680855,0.707106753823,0.)); +#232561 = ADVANCED_FACE('',(#232562),#232587,.T.); +#232562 = FACE_BOUND('',#232563,.T.); +#232563 = EDGE_LOOP('',(#232564,#232565,#232573,#232581)); +#232564 = ORIENTED_EDGE('',*,*,#232543,.T.); +#232565 = ORIENTED_EDGE('',*,*,#232566,.T.); +#232566 = EDGE_CURVE('',#232536,#232567,#232569,.T.); +#232567 = VERTEX_POINT('',#232568); +#232568 = CARTESIAN_POINT('',(123.980491,-136.198079,1.545)); +#232569 = LINE('',#232570,#232571); +#232570 = CARTESIAN_POINT('',(129.994712,-136.2,1.545)); +#232571 = VECTOR('',#232572,1.); +#232572 = DIRECTION('',(-0.999999948989,3.194095963532E-04,0.)); +#232573 = ORIENTED_EDGE('',*,*,#232574,.F.); +#232574 = EDGE_CURVE('',#232575,#232567,#232577,.T.); +#232575 = VERTEX_POINT('',#232576); +#232576 = CARTESIAN_POINT('',(123.980491,-136.198079,1.51)); +#232577 = LINE('',#232578,#232579); +#232578 = CARTESIAN_POINT('',(123.980491,-136.198079,1.51)); +#232579 = VECTOR('',#232580,1.); +#232580 = DIRECTION('',(0.,0.,1.)); +#232581 = ORIENTED_EDGE('',*,*,#232582,.F.); +#232582 = EDGE_CURVE('',#232544,#232575,#232583,.T.); +#232583 = LINE('',#232584,#232585); +#232584 = CARTESIAN_POINT('',(129.994712,-136.2,1.51)); +#232585 = VECTOR('',#232586,1.); +#232586 = DIRECTION('',(-0.999999948989,3.194095963532E-04,0.)); +#232587 = PLANE('',#232588); +#232588 = AXIS2_PLACEMENT_3D('',#232589,#232590,#232591); +#232589 = CARTESIAN_POINT('',(129.994712,-136.2,1.51)); +#232590 = DIRECTION('',(-3.194095963532E-04,-0.999999948989,0.)); +#232591 = DIRECTION('',(-0.999999948989,3.194095963532E-04,0.)); +#232592 = ADVANCED_FACE('',(#232593),#232618,.T.); +#232593 = FACE_BOUND('',#232594,.T.); +#232594 = EDGE_LOOP('',(#232595,#232596,#232604,#232612)); +#232595 = ORIENTED_EDGE('',*,*,#232574,.T.); +#232596 = ORIENTED_EDGE('',*,*,#232597,.T.); +#232597 = EDGE_CURVE('',#232567,#232598,#232600,.T.); +#232598 = VERTEX_POINT('',#232599); +#232599 = CARTESIAN_POINT('',(123.944443,-136.183147,1.545)); +#232600 = LINE('',#232601,#232602); +#232601 = CARTESIAN_POINT('',(123.980491,-136.198079,1.545)); +#232602 = VECTOR('',#232603,1.); +#232603 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232604 = ORIENTED_EDGE('',*,*,#232605,.F.); +#232605 = EDGE_CURVE('',#232606,#232598,#232608,.T.); +#232606 = VERTEX_POINT('',#232607); +#232607 = CARTESIAN_POINT('',(123.944443,-136.183147,1.51)); +#232608 = LINE('',#232609,#232610); +#232609 = CARTESIAN_POINT('',(123.944443,-136.183147,1.51)); +#232610 = VECTOR('',#232611,1.); +#232611 = DIRECTION('',(0.,0.,1.)); +#232612 = ORIENTED_EDGE('',*,*,#232613,.F.); +#232613 = EDGE_CURVE('',#232575,#232606,#232614,.T.); +#232614 = LINE('',#232615,#232616); +#232615 = CARTESIAN_POINT('',(123.980491,-136.198079,1.51)); +#232616 = VECTOR('',#232617,1.); +#232617 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232618 = PLANE('',#232619); +#232619 = AXIS2_PLACEMENT_3D('',#232620,#232621,#232622); +#232620 = CARTESIAN_POINT('',(123.980491,-136.198079,1.51)); +#232621 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#232622 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232623 = ADVANCED_FACE('',(#232624),#232649,.T.); +#232624 = FACE_BOUND('',#232625,.T.); +#232625 = EDGE_LOOP('',(#232626,#232627,#232635,#232643)); +#232626 = ORIENTED_EDGE('',*,*,#232605,.T.); +#232627 = ORIENTED_EDGE('',*,*,#232628,.T.); +#232628 = EDGE_CURVE('',#232598,#232629,#232631,.T.); +#232629 = VERTEX_POINT('',#232630); +#232630 = CARTESIAN_POINT('',(122.016853,-134.255557,1.545)); +#232631 = LINE('',#232632,#232633); +#232632 = CARTESIAN_POINT('',(123.944443,-136.183147,1.545)); +#232633 = VECTOR('',#232634,1.); +#232634 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232635 = ORIENTED_EDGE('',*,*,#232636,.F.); +#232636 = EDGE_CURVE('',#232637,#232629,#232639,.T.); +#232637 = VERTEX_POINT('',#232638); +#232638 = CARTESIAN_POINT('',(122.016853,-134.255557,1.51)); +#232639 = LINE('',#232640,#232641); +#232640 = CARTESIAN_POINT('',(122.016853,-134.255557,1.51)); +#232641 = VECTOR('',#232642,1.); +#232642 = DIRECTION('',(0.,0.,1.)); +#232643 = ORIENTED_EDGE('',*,*,#232644,.F.); +#232644 = EDGE_CURVE('',#232606,#232637,#232645,.T.); +#232645 = LINE('',#232646,#232647); +#232646 = CARTESIAN_POINT('',(123.944443,-136.183147,1.51)); +#232647 = VECTOR('',#232648,1.); +#232648 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232649 = PLANE('',#232650); +#232650 = AXIS2_PLACEMENT_3D('',#232651,#232652,#232653); +#232651 = CARTESIAN_POINT('',(123.944443,-136.183147,1.51)); +#232652 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#232653 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#232654 = ADVANCED_FACE('',(#232655),#232680,.T.); +#232655 = FACE_BOUND('',#232656,.T.); +#232656 = EDGE_LOOP('',(#232657,#232658,#232666,#232674)); +#232657 = ORIENTED_EDGE('',*,*,#232636,.T.); +#232658 = ORIENTED_EDGE('',*,*,#232659,.T.); +#232659 = EDGE_CURVE('',#232629,#232660,#232662,.T.); +#232660 = VERTEX_POINT('',#232661); +#232661 = CARTESIAN_POINT('',(122.001921,-134.219509,1.545)); +#232662 = LINE('',#232663,#232664); +#232663 = CARTESIAN_POINT('',(122.016853,-134.255557,1.545)); +#232664 = VECTOR('',#232665,1.); +#232665 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#232666 = ORIENTED_EDGE('',*,*,#232667,.F.); +#232667 = EDGE_CURVE('',#232668,#232660,#232670,.T.); +#232668 = VERTEX_POINT('',#232669); +#232669 = CARTESIAN_POINT('',(122.001921,-134.219509,1.51)); +#232670 = LINE('',#232671,#232672); +#232671 = CARTESIAN_POINT('',(122.001921,-134.219509,1.51)); +#232672 = VECTOR('',#232673,1.); +#232673 = DIRECTION('',(0.,0.,1.)); +#232674 = ORIENTED_EDGE('',*,*,#232675,.F.); +#232675 = EDGE_CURVE('',#232637,#232668,#232676,.T.); +#232676 = LINE('',#232677,#232678); +#232677 = CARTESIAN_POINT('',(122.016853,-134.255557,1.51)); +#232678 = VECTOR('',#232679,1.); +#232679 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#232680 = PLANE('',#232681); +#232681 = AXIS2_PLACEMENT_3D('',#232682,#232683,#232684); +#232682 = CARTESIAN_POINT('',(122.016853,-134.255557,1.51)); +#232683 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#232684 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#232685 = ADVANCED_FACE('',(#232686),#232711,.T.); +#232686 = FACE_BOUND('',#232687,.T.); +#232687 = EDGE_LOOP('',(#232688,#232689,#232697,#232705)); +#232688 = ORIENTED_EDGE('',*,*,#232667,.T.); +#232689 = ORIENTED_EDGE('',*,*,#232690,.T.); +#232690 = EDGE_CURVE('',#232660,#232691,#232693,.T.); +#232691 = VERTEX_POINT('',#232692); +#232692 = CARTESIAN_POINT('',(122.001921,-119.180491,1.545)); +#232693 = LINE('',#232694,#232695); +#232694 = CARTESIAN_POINT('',(122.001921,-134.219509,1.545)); +#232695 = VECTOR('',#232696,1.); +#232696 = DIRECTION('',(0.,1.,0.)); +#232697 = ORIENTED_EDGE('',*,*,#232698,.F.); +#232698 = EDGE_CURVE('',#232699,#232691,#232701,.T.); +#232699 = VERTEX_POINT('',#232700); +#232700 = CARTESIAN_POINT('',(122.001921,-119.180491,1.51)); +#232701 = LINE('',#232702,#232703); +#232702 = CARTESIAN_POINT('',(122.001921,-119.180491,1.51)); +#232703 = VECTOR('',#232704,1.); +#232704 = DIRECTION('',(0.,0.,1.)); +#232705 = ORIENTED_EDGE('',*,*,#232706,.F.); +#232706 = EDGE_CURVE('',#232668,#232699,#232707,.T.); +#232707 = LINE('',#232708,#232709); +#232708 = CARTESIAN_POINT('',(122.001921,-134.219509,1.51)); +#232709 = VECTOR('',#232710,1.); +#232710 = DIRECTION('',(0.,1.,0.)); +#232711 = PLANE('',#232712); +#232712 = AXIS2_PLACEMENT_3D('',#232713,#232714,#232715); +#232713 = CARTESIAN_POINT('',(122.001921,-134.219509,1.51)); +#232714 = DIRECTION('',(-1.,0.,0.)); +#232715 = DIRECTION('',(0.,1.,0.)); +#232716 = ADVANCED_FACE('',(#232717),#232742,.T.); +#232717 = FACE_BOUND('',#232718,.T.); +#232718 = EDGE_LOOP('',(#232719,#232720,#232728,#232736)); +#232719 = ORIENTED_EDGE('',*,*,#232698,.T.); +#232720 = ORIENTED_EDGE('',*,*,#232721,.T.); +#232721 = EDGE_CURVE('',#232691,#232722,#232724,.T.); +#232722 = VERTEX_POINT('',#232723); +#232723 = CARTESIAN_POINT('',(122.016853,-119.144443,1.545)); +#232724 = LINE('',#232725,#232726); +#232725 = CARTESIAN_POINT('',(122.001921,-119.180491,1.545)); +#232726 = VECTOR('',#232727,1.); +#232727 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232728 = ORIENTED_EDGE('',*,*,#232729,.F.); +#232729 = EDGE_CURVE('',#232730,#232722,#232732,.T.); +#232730 = VERTEX_POINT('',#232731); +#232731 = CARTESIAN_POINT('',(122.016853,-119.144443,1.51)); +#232732 = LINE('',#232733,#232734); +#232733 = CARTESIAN_POINT('',(122.016853,-119.144443,1.51)); +#232734 = VECTOR('',#232735,1.); +#232735 = DIRECTION('',(0.,0.,1.)); +#232736 = ORIENTED_EDGE('',*,*,#232737,.F.); +#232737 = EDGE_CURVE('',#232699,#232730,#232738,.T.); +#232738 = LINE('',#232739,#232740); +#232739 = CARTESIAN_POINT('',(122.001921,-119.180491,1.51)); +#232740 = VECTOR('',#232741,1.); +#232741 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232742 = PLANE('',#232743); +#232743 = AXIS2_PLACEMENT_3D('',#232744,#232745,#232746); +#232744 = CARTESIAN_POINT('',(122.001921,-119.180491,1.51)); +#232745 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232746 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232747 = ADVANCED_FACE('',(#232748),#232773,.T.); +#232748 = FACE_BOUND('',#232749,.T.); +#232749 = EDGE_LOOP('',(#232750,#232751,#232759,#232767)); +#232750 = ORIENTED_EDGE('',*,*,#232729,.T.); +#232751 = ORIENTED_EDGE('',*,*,#232752,.T.); +#232752 = EDGE_CURVE('',#232722,#232753,#232755,.T.); +#232753 = VERTEX_POINT('',#232754); +#232754 = CARTESIAN_POINT('',(126.5,-114.658578,1.545)); +#232755 = LINE('',#232756,#232757); +#232756 = CARTESIAN_POINT('',(122.016853,-119.144443,1.545)); +#232757 = VECTOR('',#232758,1.); +#232758 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#232759 = ORIENTED_EDGE('',*,*,#232760,.F.); +#232760 = EDGE_CURVE('',#232761,#232753,#232763,.T.); +#232761 = VERTEX_POINT('',#232762); +#232762 = CARTESIAN_POINT('',(126.5,-114.658578,1.51)); +#232763 = LINE('',#232764,#232765); +#232764 = CARTESIAN_POINT('',(126.5,-114.658578,1.51)); +#232765 = VECTOR('',#232766,1.); +#232766 = DIRECTION('',(0.,0.,1.)); +#232767 = ORIENTED_EDGE('',*,*,#232768,.F.); +#232768 = EDGE_CURVE('',#232730,#232761,#232769,.T.); +#232769 = LINE('',#232770,#232771); +#232770 = CARTESIAN_POINT('',(122.016853,-119.144443,1.51)); +#232771 = VECTOR('',#232772,1.); +#232772 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#232773 = PLANE('',#232774); +#232774 = AXIS2_PLACEMENT_3D('',#232775,#232776,#232777); +#232775 = CARTESIAN_POINT('',(122.016853,-119.144443,1.51)); +#232776 = DIRECTION('',(-0.70732103276,0.706892464676,0.)); +#232777 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#232778 = ADVANCED_FACE('',(#232779),#232804,.T.); +#232779 = FACE_BOUND('',#232780,.T.); +#232780 = EDGE_LOOP('',(#232781,#232782,#232790,#232798)); +#232781 = ORIENTED_EDGE('',*,*,#232760,.T.); +#232782 = ORIENTED_EDGE('',*,*,#232783,.T.); +#232783 = EDGE_CURVE('',#232753,#232784,#232786,.T.); +#232784 = VERTEX_POINT('',#232785); +#232785 = CARTESIAN_POINT('',(126.501921,-103.680491,1.545)); +#232786 = LINE('',#232787,#232788); +#232787 = CARTESIAN_POINT('',(126.5,-114.658578,1.545)); +#232788 = VECTOR('',#232789,1.); +#232789 = DIRECTION('',(1.749849468842E-04,0.99999998469,0.)); +#232790 = ORIENTED_EDGE('',*,*,#232791,.F.); +#232791 = EDGE_CURVE('',#232792,#232784,#232794,.T.); +#232792 = VERTEX_POINT('',#232793); +#232793 = CARTESIAN_POINT('',(126.501921,-103.680491,1.51)); +#232794 = LINE('',#232795,#232796); +#232795 = CARTESIAN_POINT('',(126.501921,-103.680491,1.51)); +#232796 = VECTOR('',#232797,1.); +#232797 = DIRECTION('',(0.,0.,1.)); +#232798 = ORIENTED_EDGE('',*,*,#232799,.F.); +#232799 = EDGE_CURVE('',#232761,#232792,#232800,.T.); +#232800 = LINE('',#232801,#232802); +#232801 = CARTESIAN_POINT('',(126.5,-114.658578,1.51)); +#232802 = VECTOR('',#232803,1.); +#232803 = DIRECTION('',(1.749849468842E-04,0.99999998469,0.)); +#232804 = PLANE('',#232805); +#232805 = AXIS2_PLACEMENT_3D('',#232806,#232807,#232808); +#232806 = CARTESIAN_POINT('',(126.5,-114.658578,1.51)); +#232807 = DIRECTION('',(-0.99999998469,1.749849468842E-04,0.)); +#232808 = DIRECTION('',(1.749849468842E-04,0.99999998469,0.)); +#232809 = ADVANCED_FACE('',(#232810),#232835,.T.); +#232810 = FACE_BOUND('',#232811,.T.); +#232811 = EDGE_LOOP('',(#232812,#232813,#232821,#232829)); +#232812 = ORIENTED_EDGE('',*,*,#232791,.T.); +#232813 = ORIENTED_EDGE('',*,*,#232814,.T.); +#232814 = EDGE_CURVE('',#232784,#232815,#232817,.T.); +#232815 = VERTEX_POINT('',#232816); +#232816 = CARTESIAN_POINT('',(126.516853,-103.644443,1.545)); +#232817 = LINE('',#232818,#232819); +#232818 = CARTESIAN_POINT('',(126.501921,-103.680491,1.545)); +#232819 = VECTOR('',#232820,1.); +#232820 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232821 = ORIENTED_EDGE('',*,*,#232822,.F.); +#232822 = EDGE_CURVE('',#232823,#232815,#232825,.T.); +#232823 = VERTEX_POINT('',#232824); +#232824 = CARTESIAN_POINT('',(126.516853,-103.644443,1.51)); +#232825 = LINE('',#232826,#232827); +#232826 = CARTESIAN_POINT('',(126.516853,-103.644443,1.51)); +#232827 = VECTOR('',#232828,1.); +#232828 = DIRECTION('',(0.,0.,1.)); +#232829 = ORIENTED_EDGE('',*,*,#232830,.F.); +#232830 = EDGE_CURVE('',#232792,#232823,#232831,.T.); +#232831 = LINE('',#232832,#232833); +#232832 = CARTESIAN_POINT('',(126.501921,-103.680491,1.51)); +#232833 = VECTOR('',#232834,1.); +#232834 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232835 = PLANE('',#232836); +#232836 = AXIS2_PLACEMENT_3D('',#232837,#232838,#232839); +#232837 = CARTESIAN_POINT('',(126.501921,-103.680491,1.51)); +#232838 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232839 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232840 = ADVANCED_FACE('',(#232841),#232866,.T.); +#232841 = FACE_BOUND('',#232842,.T.); +#232842 = EDGE_LOOP('',(#232843,#232844,#232852,#232860)); +#232843 = ORIENTED_EDGE('',*,*,#232822,.T.); +#232844 = ORIENTED_EDGE('',*,*,#232845,.T.); +#232845 = EDGE_CURVE('',#232815,#232846,#232848,.T.); +#232846 = VERTEX_POINT('',#232847); +#232847 = CARTESIAN_POINT('',(129.5,-100.658578,1.545)); +#232848 = LINE('',#232849,#232850); +#232849 = CARTESIAN_POINT('',(126.516853,-103.644443,1.545)); +#232850 = VECTOR('',#232851,1.); +#232851 = DIRECTION('',(0.706784725609,0.707428690149,0.)); +#232852 = ORIENTED_EDGE('',*,*,#232853,.F.); +#232853 = EDGE_CURVE('',#232854,#232846,#232856,.T.); +#232854 = VERTEX_POINT('',#232855); +#232855 = CARTESIAN_POINT('',(129.5,-100.658578,1.51)); +#232856 = LINE('',#232857,#232858); +#232857 = CARTESIAN_POINT('',(129.5,-100.658578,1.51)); +#232858 = VECTOR('',#232859,1.); +#232859 = DIRECTION('',(0.,0.,1.)); +#232860 = ORIENTED_EDGE('',*,*,#232861,.F.); +#232861 = EDGE_CURVE('',#232823,#232854,#232862,.T.); +#232862 = LINE('',#232863,#232864); +#232863 = CARTESIAN_POINT('',(126.516853,-103.644443,1.51)); +#232864 = VECTOR('',#232865,1.); +#232865 = DIRECTION('',(0.706784725609,0.707428690149,0.)); +#232866 = PLANE('',#232867); +#232867 = AXIS2_PLACEMENT_3D('',#232868,#232869,#232870); +#232868 = CARTESIAN_POINT('',(126.516853,-103.644443,1.51)); +#232869 = DIRECTION('',(-0.707428690149,0.706784725609,0.)); +#232870 = DIRECTION('',(0.706784725609,0.707428690149,0.)); +#232871 = ADVANCED_FACE('',(#232872),#232897,.T.); +#232872 = FACE_BOUND('',#232873,.T.); +#232873 = EDGE_LOOP('',(#232874,#232875,#232883,#232891)); +#232874 = ORIENTED_EDGE('',*,*,#232853,.T.); +#232875 = ORIENTED_EDGE('',*,*,#232876,.T.); +#232876 = EDGE_CURVE('',#232846,#232877,#232879,.T.); +#232877 = VERTEX_POINT('',#232878); +#232878 = CARTESIAN_POINT('',(129.501921,-88.380491,1.545)); +#232879 = LINE('',#232880,#232881); +#232880 = CARTESIAN_POINT('',(129.5,-100.658578,1.545)); +#232881 = VECTOR('',#232882,1.); +#232882 = DIRECTION('',(1.564575960814E-04,0.999999987761,0.)); +#232883 = ORIENTED_EDGE('',*,*,#232884,.F.); +#232884 = EDGE_CURVE('',#232885,#232877,#232887,.T.); +#232885 = VERTEX_POINT('',#232886); +#232886 = CARTESIAN_POINT('',(129.501921,-88.380491,1.51)); +#232887 = LINE('',#232888,#232889); +#232888 = CARTESIAN_POINT('',(129.501921,-88.380491,1.51)); +#232889 = VECTOR('',#232890,1.); +#232890 = DIRECTION('',(0.,0.,1.)); +#232891 = ORIENTED_EDGE('',*,*,#232892,.F.); +#232892 = EDGE_CURVE('',#232854,#232885,#232893,.T.); +#232893 = LINE('',#232894,#232895); +#232894 = CARTESIAN_POINT('',(129.5,-100.658578,1.51)); +#232895 = VECTOR('',#232896,1.); +#232896 = DIRECTION('',(1.564575960814E-04,0.999999987761,0.)); +#232897 = PLANE('',#232898); +#232898 = AXIS2_PLACEMENT_3D('',#232899,#232900,#232901); +#232899 = CARTESIAN_POINT('',(129.5,-100.658578,1.51)); +#232900 = DIRECTION('',(-0.999999987761,1.564575960814E-04,0.)); +#232901 = DIRECTION('',(1.564575960814E-04,0.999999987761,0.)); +#232902 = ADVANCED_FACE('',(#232903),#232928,.T.); +#232903 = FACE_BOUND('',#232904,.T.); +#232904 = EDGE_LOOP('',(#232905,#232906,#232914,#232922)); +#232905 = ORIENTED_EDGE('',*,*,#232884,.T.); +#232906 = ORIENTED_EDGE('',*,*,#232907,.T.); +#232907 = EDGE_CURVE('',#232877,#232908,#232910,.T.); +#232908 = VERTEX_POINT('',#232909); +#232909 = CARTESIAN_POINT('',(129.516853,-88.344443,1.545)); +#232910 = LINE('',#232911,#232912); +#232911 = CARTESIAN_POINT('',(129.501921,-88.380491,1.545)); +#232912 = VECTOR('',#232913,1.); +#232913 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232914 = ORIENTED_EDGE('',*,*,#232915,.F.); +#232915 = EDGE_CURVE('',#232916,#232908,#232918,.T.); +#232916 = VERTEX_POINT('',#232917); +#232917 = CARTESIAN_POINT('',(129.516853,-88.344443,1.51)); +#232918 = LINE('',#232919,#232920); +#232919 = CARTESIAN_POINT('',(129.516853,-88.344443,1.51)); +#232920 = VECTOR('',#232921,1.); +#232921 = DIRECTION('',(0.,0.,1.)); +#232922 = ORIENTED_EDGE('',*,*,#232923,.F.); +#232923 = EDGE_CURVE('',#232885,#232916,#232924,.T.); +#232924 = LINE('',#232925,#232926); +#232925 = CARTESIAN_POINT('',(129.501921,-88.380491,1.51)); +#232926 = VECTOR('',#232927,1.); +#232927 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232928 = PLANE('',#232929); +#232929 = AXIS2_PLACEMENT_3D('',#232930,#232931,#232932); +#232930 = CARTESIAN_POINT('',(129.501921,-88.380491,1.51)); +#232931 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#232932 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#232933 = ADVANCED_FACE('',(#232934),#232959,.T.); +#232934 = FACE_BOUND('',#232935,.T.); +#232935 = EDGE_LOOP('',(#232936,#232937,#232945,#232953)); +#232936 = ORIENTED_EDGE('',*,*,#232915,.T.); +#232937 = ORIENTED_EDGE('',*,*,#232938,.T.); +#232938 = EDGE_CURVE('',#232908,#232939,#232941,.T.); +#232939 = VERTEX_POINT('',#232940); +#232940 = CARTESIAN_POINT('',(130.4,-87.458578,1.545)); +#232941 = LINE('',#232942,#232943); +#232942 = CARTESIAN_POINT('',(129.516853,-88.344443,1.545)); +#232943 = VECTOR('',#232944,1.); +#232944 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#232945 = ORIENTED_EDGE('',*,*,#232946,.F.); +#232946 = EDGE_CURVE('',#232947,#232939,#232949,.T.); +#232947 = VERTEX_POINT('',#232948); +#232948 = CARTESIAN_POINT('',(130.4,-87.458578,1.51)); +#232949 = LINE('',#232950,#232951); +#232950 = CARTESIAN_POINT('',(130.4,-87.458578,1.51)); +#232951 = VECTOR('',#232952,1.); +#232952 = DIRECTION('',(0.,0.,1.)); +#232953 = ORIENTED_EDGE('',*,*,#232954,.F.); +#232954 = EDGE_CURVE('',#232916,#232947,#232955,.T.); +#232955 = LINE('',#232956,#232957); +#232956 = CARTESIAN_POINT('',(129.516853,-88.344443,1.51)); +#232957 = VECTOR('',#232958,1.); +#232958 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#232959 = PLANE('',#232960); +#232960 = AXIS2_PLACEMENT_3D('',#232961,#232962,#232963); +#232961 = CARTESIAN_POINT('',(129.516853,-88.344443,1.51)); +#232962 = DIRECTION('',(-0.708192380097,0.706019513025,0.)); +#232963 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#232964 = ADVANCED_FACE('',(#232965),#232990,.T.); +#232965 = FACE_BOUND('',#232966,.T.); +#232966 = EDGE_LOOP('',(#232967,#232968,#232976,#232984)); +#232967 = ORIENTED_EDGE('',*,*,#232946,.T.); +#232968 = ORIENTED_EDGE('',*,*,#232969,.T.); +#232969 = EDGE_CURVE('',#232939,#232970,#232972,.T.); +#232970 = VERTEX_POINT('',#232971); +#232971 = CARTESIAN_POINT('',(130.401921,-87.081962,1.545)); +#232972 = LINE('',#232973,#232974); +#232973 = CARTESIAN_POINT('',(130.4,-87.458578,1.545)); +#232974 = VECTOR('',#232975,1.); +#232975 = DIRECTION('',(5.100619758964E-03,0.999986991754,0.)); +#232976 = ORIENTED_EDGE('',*,*,#232977,.F.); +#232977 = EDGE_CURVE('',#232978,#232970,#232980,.T.); +#232978 = VERTEX_POINT('',#232979); +#232979 = CARTESIAN_POINT('',(130.401921,-87.081962,1.51)); +#232980 = LINE('',#232981,#232982); +#232981 = CARTESIAN_POINT('',(130.401921,-87.081962,1.51)); +#232982 = VECTOR('',#232983,1.); +#232983 = DIRECTION('',(0.,0.,1.)); +#232984 = ORIENTED_EDGE('',*,*,#232985,.F.); +#232985 = EDGE_CURVE('',#232947,#232978,#232986,.T.); +#232986 = LINE('',#232987,#232988); +#232987 = CARTESIAN_POINT('',(130.4,-87.458578,1.51)); +#232988 = VECTOR('',#232989,1.); +#232989 = DIRECTION('',(5.100619758964E-03,0.999986991754,0.)); +#232990 = PLANE('',#232991); +#232991 = AXIS2_PLACEMENT_3D('',#232992,#232993,#232994); +#232992 = CARTESIAN_POINT('',(130.4,-87.458578,1.51)); +#232993 = DIRECTION('',(-0.999986991754,5.100619758964E-03,0.)); +#232994 = DIRECTION('',(5.100619758964E-03,0.999986991754,0.)); +#232995 = ADVANCED_FACE('',(#232996),#233021,.T.); +#232996 = FACE_BOUND('',#232997,.T.); +#232997 = EDGE_LOOP('',(#232998,#232999,#233007,#233015)); +#232998 = ORIENTED_EDGE('',*,*,#232977,.T.); +#232999 = ORIENTED_EDGE('',*,*,#233000,.T.); +#233000 = EDGE_CURVE('',#232970,#233001,#233003,.T.); +#233001 = VERTEX_POINT('',#233002); +#233002 = CARTESIAN_POINT('',(130.416853,-87.045914,1.545)); +#233003 = LINE('',#233004,#233005); +#233004 = CARTESIAN_POINT('',(130.401921,-87.081962,1.545)); +#233005 = VECTOR('',#233006,1.); +#233006 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233007 = ORIENTED_EDGE('',*,*,#233008,.F.); +#233008 = EDGE_CURVE('',#233009,#233001,#233011,.T.); +#233009 = VERTEX_POINT('',#233010); +#233010 = CARTESIAN_POINT('',(130.416853,-87.045914,1.51)); +#233011 = LINE('',#233012,#233013); +#233012 = CARTESIAN_POINT('',(130.416853,-87.045914,1.51)); +#233013 = VECTOR('',#233014,1.); +#233014 = DIRECTION('',(0.,0.,1.)); +#233015 = ORIENTED_EDGE('',*,*,#233016,.F.); +#233016 = EDGE_CURVE('',#232978,#233009,#233017,.T.); +#233017 = LINE('',#233018,#233019); +#233018 = CARTESIAN_POINT('',(130.401921,-87.081962,1.51)); +#233019 = VECTOR('',#233020,1.); +#233020 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233021 = PLANE('',#233022); +#233022 = AXIS2_PLACEMENT_3D('',#233023,#233024,#233025); +#233023 = CARTESIAN_POINT('',(130.401921,-87.081962,1.51)); +#233024 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#233025 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233026 = ADVANCED_FACE('',(#233027),#233052,.T.); +#233027 = FACE_BOUND('',#233028,.T.); +#233028 = EDGE_LOOP('',(#233029,#233030,#233038,#233046)); +#233029 = ORIENTED_EDGE('',*,*,#233008,.T.); +#233030 = ORIENTED_EDGE('',*,*,#233031,.T.); +#233031 = EDGE_CURVE('',#233001,#233032,#233034,.T.); +#233032 = VERTEX_POINT('',#233033); +#233033 = CARTESIAN_POINT('',(130.795914,-86.666853,1.545)); +#233034 = LINE('',#233035,#233036); +#233035 = CARTESIAN_POINT('',(130.416853,-87.045914,1.545)); +#233036 = VECTOR('',#233037,1.); +#233037 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233038 = ORIENTED_EDGE('',*,*,#233039,.F.); +#233039 = EDGE_CURVE('',#233040,#233032,#233042,.T.); +#233040 = VERTEX_POINT('',#233041); +#233041 = CARTESIAN_POINT('',(130.795914,-86.666853,1.51)); +#233042 = LINE('',#233043,#233044); +#233043 = CARTESIAN_POINT('',(130.795914,-86.666853,1.51)); +#233044 = VECTOR('',#233045,1.); +#233045 = DIRECTION('',(0.,0.,1.)); +#233046 = ORIENTED_EDGE('',*,*,#233047,.F.); +#233047 = EDGE_CURVE('',#233009,#233040,#233048,.T.); +#233048 = LINE('',#233049,#233050); +#233049 = CARTESIAN_POINT('',(130.416853,-87.045914,1.51)); +#233050 = VECTOR('',#233051,1.); +#233051 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233052 = PLANE('',#233053); +#233053 = AXIS2_PLACEMENT_3D('',#233054,#233055,#233056); +#233054 = CARTESIAN_POINT('',(130.416853,-87.045914,1.51)); +#233055 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233056 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233057 = ADVANCED_FACE('',(#233058),#233083,.T.); +#233058 = FACE_BOUND('',#233059,.T.); +#233059 = EDGE_LOOP('',(#233060,#233061,#233069,#233077)); +#233060 = ORIENTED_EDGE('',*,*,#233039,.T.); +#233061 = ORIENTED_EDGE('',*,*,#233062,.T.); +#233062 = EDGE_CURVE('',#233032,#233063,#233065,.T.); +#233063 = VERTEX_POINT('',#233064); +#233064 = CARTESIAN_POINT('',(130.831962,-86.651921,1.545)); +#233065 = LINE('',#233066,#233067); +#233066 = CARTESIAN_POINT('',(130.795914,-86.666853,1.545)); +#233067 = VECTOR('',#233068,1.); +#233068 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233069 = ORIENTED_EDGE('',*,*,#233070,.F.); +#233070 = EDGE_CURVE('',#233071,#233063,#233073,.T.); +#233071 = VERTEX_POINT('',#233072); +#233072 = CARTESIAN_POINT('',(130.831962,-86.651921,1.51)); +#233073 = LINE('',#233074,#233075); +#233074 = CARTESIAN_POINT('',(130.831962,-86.651921,1.51)); +#233075 = VECTOR('',#233076,1.); +#233076 = DIRECTION('',(0.,0.,1.)); +#233077 = ORIENTED_EDGE('',*,*,#233078,.F.); +#233078 = EDGE_CURVE('',#233040,#233071,#233079,.T.); +#233079 = LINE('',#233080,#233081); +#233080 = CARTESIAN_POINT('',(130.795914,-86.666853,1.51)); +#233081 = VECTOR('',#233082,1.); +#233082 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233083 = PLANE('',#233084); +#233084 = AXIS2_PLACEMENT_3D('',#233085,#233086,#233087); +#233085 = CARTESIAN_POINT('',(130.795914,-86.666853,1.51)); +#233086 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#233087 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233088 = ADVANCED_FACE('',(#233089),#233114,.T.); +#233089 = FACE_BOUND('',#233090,.T.); +#233090 = EDGE_LOOP('',(#233091,#233092,#233100,#233108)); +#233091 = ORIENTED_EDGE('',*,*,#233070,.T.); +#233092 = ORIENTED_EDGE('',*,*,#233093,.T.); +#233093 = EDGE_CURVE('',#233063,#233094,#233096,.T.); +#233094 = VERTEX_POINT('',#233095); +#233095 = CARTESIAN_POINT('',(131.208578,-86.65,1.545)); +#233096 = LINE('',#233097,#233098); +#233097 = CARTESIAN_POINT('',(130.831962,-86.651921,1.545)); +#233098 = VECTOR('',#233099,1.); +#233099 = DIRECTION('',(0.999986991754,5.100619759002E-03,0.)); +#233100 = ORIENTED_EDGE('',*,*,#233101,.F.); +#233101 = EDGE_CURVE('',#233102,#233094,#233104,.T.); +#233102 = VERTEX_POINT('',#233103); +#233103 = CARTESIAN_POINT('',(131.208578,-86.65,1.51)); +#233104 = LINE('',#233105,#233106); +#233105 = CARTESIAN_POINT('',(131.208578,-86.65,1.51)); +#233106 = VECTOR('',#233107,1.); +#233107 = DIRECTION('',(0.,0.,1.)); +#233108 = ORIENTED_EDGE('',*,*,#233109,.F.); +#233109 = EDGE_CURVE('',#233071,#233102,#233110,.T.); +#233110 = LINE('',#233111,#233112); +#233111 = CARTESIAN_POINT('',(130.831962,-86.651921,1.51)); +#233112 = VECTOR('',#233113,1.); +#233113 = DIRECTION('',(0.999986991754,5.100619759002E-03,0.)); +#233114 = PLANE('',#233115); +#233115 = AXIS2_PLACEMENT_3D('',#233116,#233117,#233118); +#233116 = CARTESIAN_POINT('',(130.831962,-86.651921,1.51)); +#233117 = DIRECTION('',(-5.100619759002E-03,0.999986991754,0.)); +#233118 = DIRECTION('',(0.999986991754,5.100619759002E-03,0.)); +#233119 = ADVANCED_FACE('',(#233120),#233145,.T.); +#233120 = FACE_BOUND('',#233121,.T.); +#233121 = EDGE_LOOP('',(#233122,#233123,#233131,#233139)); +#233122 = ORIENTED_EDGE('',*,*,#233101,.T.); +#233123 = ORIENTED_EDGE('',*,*,#233124,.T.); +#233124 = EDGE_CURVE('',#233094,#233125,#233127,.T.); +#233125 = VERTEX_POINT('',#233126); +#233126 = CARTESIAN_POINT('',(131.424265,-86.434313,1.545)); +#233127 = LINE('',#233128,#233129); +#233128 = CARTESIAN_POINT('',(131.208578,-86.65,1.545)); +#233129 = VECTOR('',#233130,1.); +#233130 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233131 = ORIENTED_EDGE('',*,*,#233132,.F.); +#233132 = EDGE_CURVE('',#233133,#233125,#233135,.T.); +#233133 = VERTEX_POINT('',#233134); +#233134 = CARTESIAN_POINT('',(131.424265,-86.434313,1.51)); +#233135 = LINE('',#233136,#233137); +#233136 = CARTESIAN_POINT('',(131.424265,-86.434313,1.51)); +#233137 = VECTOR('',#233138,1.); +#233138 = DIRECTION('',(0.,0.,1.)); +#233139 = ORIENTED_EDGE('',*,*,#233140,.F.); +#233140 = EDGE_CURVE('',#233102,#233133,#233141,.T.); +#233141 = LINE('',#233142,#233143); +#233142 = CARTESIAN_POINT('',(131.208578,-86.65,1.51)); +#233143 = VECTOR('',#233144,1.); +#233144 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233145 = PLANE('',#233146); +#233146 = AXIS2_PLACEMENT_3D('',#233147,#233148,#233149); +#233147 = CARTESIAN_POINT('',(131.208578,-86.65,1.51)); +#233148 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233149 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233150 = ADVANCED_FACE('',(#233151),#233176,.T.); +#233151 = FACE_BOUND('',#233152,.T.); +#233152 = EDGE_LOOP('',(#233153,#233154,#233162,#233170)); +#233153 = ORIENTED_EDGE('',*,*,#233132,.T.); +#233154 = ORIENTED_EDGE('',*,*,#233155,.T.); +#233155 = EDGE_CURVE('',#233125,#233156,#233158,.T.); +#233156 = VERTEX_POINT('',#233157); +#233157 = CARTESIAN_POINT('',(131.426186,-86.390541,1.545)); +#233158 = LINE('',#233159,#233160); +#233159 = CARTESIAN_POINT('',(131.424265,-86.434313,1.545)); +#233160 = VECTOR('',#233161,1.); +#233161 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233162 = ORIENTED_EDGE('',*,*,#233163,.F.); +#233163 = EDGE_CURVE('',#233164,#233156,#233166,.T.); +#233164 = VERTEX_POINT('',#233165); +#233165 = CARTESIAN_POINT('',(131.426186,-86.390541,1.51)); +#233166 = LINE('',#233167,#233168); +#233167 = CARTESIAN_POINT('',(131.426186,-86.390541,1.51)); +#233168 = VECTOR('',#233169,1.); +#233169 = DIRECTION('',(0.,0.,1.)); +#233170 = ORIENTED_EDGE('',*,*,#233171,.F.); +#233171 = EDGE_CURVE('',#233133,#233164,#233172,.T.); +#233172 = LINE('',#233173,#233174); +#233173 = CARTESIAN_POINT('',(131.424265,-86.434313,1.51)); +#233174 = VECTOR('',#233175,1.); +#233175 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233176 = PLANE('',#233177); +#233177 = AXIS2_PLACEMENT_3D('',#233178,#233179,#233180); +#233178 = CARTESIAN_POINT('',(131.424265,-86.434313,1.51)); +#233179 = DIRECTION('',(-0.999038376297,4.384430048609E-02,0.)); +#233180 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233181 = ADVANCED_FACE('',(#233182),#233207,.T.); +#233182 = FACE_BOUND('',#233183,.T.); +#233183 = EDGE_LOOP('',(#233184,#233185,#233193,#233201)); +#233184 = ORIENTED_EDGE('',*,*,#233163,.T.); +#233185 = ORIENTED_EDGE('',*,*,#233186,.T.); +#233186 = EDGE_CURVE('',#233156,#233187,#233189,.T.); +#233187 = VERTEX_POINT('',#233188); +#233188 = CARTESIAN_POINT('',(131.441118,-86.354493,1.545)); +#233189 = LINE('',#233190,#233191); +#233190 = CARTESIAN_POINT('',(131.426186,-86.390541,1.545)); +#233191 = VECTOR('',#233192,1.); +#233192 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233193 = ORIENTED_EDGE('',*,*,#233194,.F.); +#233194 = EDGE_CURVE('',#233195,#233187,#233197,.T.); +#233195 = VERTEX_POINT('',#233196); +#233196 = CARTESIAN_POINT('',(131.441118,-86.354493,1.51)); +#233197 = LINE('',#233198,#233199); +#233198 = CARTESIAN_POINT('',(131.441118,-86.354493,1.51)); +#233199 = VECTOR('',#233200,1.); +#233200 = DIRECTION('',(0.,0.,1.)); +#233201 = ORIENTED_EDGE('',*,*,#233202,.F.); +#233202 = EDGE_CURVE('',#233164,#233195,#233203,.T.); +#233203 = LINE('',#233204,#233205); +#233204 = CARTESIAN_POINT('',(131.426186,-86.390541,1.51)); +#233205 = VECTOR('',#233206,1.); +#233206 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233207 = PLANE('',#233208); +#233208 = AXIS2_PLACEMENT_3D('',#233209,#233210,#233211); +#233209 = CARTESIAN_POINT('',(131.426186,-86.390541,1.51)); +#233210 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#233211 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233212 = ADVANCED_FACE('',(#233213),#233238,.T.); +#233213 = FACE_BOUND('',#233214,.T.); +#233214 = EDGE_LOOP('',(#233215,#233216,#233224,#233232)); +#233215 = ORIENTED_EDGE('',*,*,#233194,.T.); +#233216 = ORIENTED_EDGE('',*,*,#233217,.T.); +#233217 = EDGE_CURVE('',#233187,#233218,#233220,.T.); +#233218 = VERTEX_POINT('',#233219); +#233219 = CARTESIAN_POINT('',(131.557108,-86.235785,1.545)); +#233220 = LINE('',#233221,#233222); +#233221 = CARTESIAN_POINT('',(131.441118,-86.354493,1.545)); +#233222 = VECTOR('',#233223,1.); +#233223 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#233224 = ORIENTED_EDGE('',*,*,#233225,.F.); +#233225 = EDGE_CURVE('',#233226,#233218,#233228,.T.); +#233226 = VERTEX_POINT('',#233227); +#233227 = CARTESIAN_POINT('',(131.557108,-86.235785,1.51)); +#233228 = LINE('',#233229,#233230); +#233229 = CARTESIAN_POINT('',(131.557108,-86.235785,1.51)); +#233230 = VECTOR('',#233231,1.); +#233231 = DIRECTION('',(0.,0.,1.)); +#233232 = ORIENTED_EDGE('',*,*,#233233,.F.); +#233233 = EDGE_CURVE('',#233195,#233226,#233234,.T.); +#233234 = LINE('',#233235,#233236); +#233235 = CARTESIAN_POINT('',(131.441118,-86.354493,1.51)); +#233236 = VECTOR('',#233237,1.); +#233237 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#233238 = PLANE('',#233239); +#233239 = AXIS2_PLACEMENT_3D('',#233240,#233241,#233242); +#233240 = CARTESIAN_POINT('',(131.441118,-86.354493,1.51)); +#233241 = DIRECTION('',(-0.715247710302,0.698871027378,0.)); +#233242 = DIRECTION('',(0.698871027378,0.715247710302,0.)); +#233243 = ADVANCED_FACE('',(#233244),#233269,.T.); +#233244 = FACE_BOUND('',#233245,.T.); +#233245 = EDGE_LOOP('',(#233246,#233247,#233255,#233263)); +#233246 = ORIENTED_EDGE('',*,*,#233225,.T.); +#233247 = ORIENTED_EDGE('',*,*,#233248,.T.); +#233248 = EDGE_CURVE('',#233218,#233249,#233251,.T.); +#233249 = VERTEX_POINT('',#233250); +#233250 = CARTESIAN_POINT('',(131.559029,-86.192013,1.545)); +#233251 = LINE('',#233252,#233253); +#233252 = CARTESIAN_POINT('',(131.557108,-86.235785,1.545)); +#233253 = VECTOR('',#233254,1.); +#233254 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233255 = ORIENTED_EDGE('',*,*,#233256,.F.); +#233256 = EDGE_CURVE('',#233257,#233249,#233259,.T.); +#233257 = VERTEX_POINT('',#233258); +#233258 = CARTESIAN_POINT('',(131.559029,-86.192013,1.51)); +#233259 = LINE('',#233260,#233261); +#233260 = CARTESIAN_POINT('',(131.559029,-86.192013,1.51)); +#233261 = VECTOR('',#233262,1.); +#233262 = DIRECTION('',(0.,0.,1.)); +#233263 = ORIENTED_EDGE('',*,*,#233264,.F.); +#233264 = EDGE_CURVE('',#233226,#233257,#233265,.T.); +#233265 = LINE('',#233266,#233267); +#233266 = CARTESIAN_POINT('',(131.557108,-86.235785,1.51)); +#233267 = VECTOR('',#233268,1.); +#233268 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233269 = PLANE('',#233270); +#233270 = AXIS2_PLACEMENT_3D('',#233271,#233272,#233273); +#233271 = CARTESIAN_POINT('',(131.557108,-86.235785,1.51)); +#233272 = DIRECTION('',(-0.999038376297,4.384430048609E-02,0.)); +#233273 = DIRECTION('',(4.384430048609E-02,0.999038376297,0.)); +#233274 = ADVANCED_FACE('',(#233275),#233300,.T.); +#233275 = FACE_BOUND('',#233276,.T.); +#233276 = EDGE_LOOP('',(#233277,#233278,#233286,#233294)); +#233277 = ORIENTED_EDGE('',*,*,#233256,.T.); +#233278 = ORIENTED_EDGE('',*,*,#233279,.T.); +#233279 = EDGE_CURVE('',#233249,#233280,#233282,.T.); +#233280 = VERTEX_POINT('',#233281); +#233281 = CARTESIAN_POINT('',(131.573961,-86.155965,1.545)); +#233282 = LINE('',#233283,#233284); +#233283 = CARTESIAN_POINT('',(131.559029,-86.192013,1.545)); +#233284 = VECTOR('',#233285,1.); +#233285 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233286 = ORIENTED_EDGE('',*,*,#233287,.F.); +#233287 = EDGE_CURVE('',#233288,#233280,#233290,.T.); +#233288 = VERTEX_POINT('',#233289); +#233289 = CARTESIAN_POINT('',(131.573961,-86.155965,1.51)); +#233290 = LINE('',#233291,#233292); +#233291 = CARTESIAN_POINT('',(131.573961,-86.155965,1.51)); +#233292 = VECTOR('',#233293,1.); +#233293 = DIRECTION('',(0.,0.,1.)); +#233294 = ORIENTED_EDGE('',*,*,#233295,.F.); +#233295 = EDGE_CURVE('',#233257,#233288,#233296,.T.); +#233296 = LINE('',#233297,#233298); +#233297 = CARTESIAN_POINT('',(131.559029,-86.192013,1.51)); +#233298 = VECTOR('',#233299,1.); +#233299 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233300 = PLANE('',#233301); +#233301 = AXIS2_PLACEMENT_3D('',#233302,#233303,#233304); +#233302 = CARTESIAN_POINT('',(131.559029,-86.192013,1.51)); +#233303 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#233304 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233305 = ADVANCED_FACE('',(#233306),#233331,.T.); +#233306 = FACE_BOUND('',#233307,.T.); +#233307 = EDGE_LOOP('',(#233308,#233309,#233317,#233325)); +#233308 = ORIENTED_EDGE('',*,*,#233287,.T.); +#233309 = ORIENTED_EDGE('',*,*,#233310,.T.); +#233310 = EDGE_CURVE('',#233280,#233311,#233313,.T.); +#233311 = VERTEX_POINT('',#233312); +#233312 = CARTESIAN_POINT('',(133.953071,-83.776853,1.545)); +#233313 = LINE('',#233314,#233315); +#233314 = CARTESIAN_POINT('',(131.573961,-86.155965,1.545)); +#233315 = VECTOR('',#233316,1.); +#233316 = DIRECTION('',(0.707106483972,0.707107078401,0.)); +#233317 = ORIENTED_EDGE('',*,*,#233318,.F.); +#233318 = EDGE_CURVE('',#233319,#233311,#233321,.T.); +#233319 = VERTEX_POINT('',#233320); +#233320 = CARTESIAN_POINT('',(133.953071,-83.776853,1.51)); +#233321 = LINE('',#233322,#233323); +#233322 = CARTESIAN_POINT('',(133.953071,-83.776853,1.51)); +#233323 = VECTOR('',#233324,1.); +#233324 = DIRECTION('',(0.,0.,1.)); +#233325 = ORIENTED_EDGE('',*,*,#233326,.F.); +#233326 = EDGE_CURVE('',#233288,#233319,#233327,.T.); +#233327 = LINE('',#233328,#233329); +#233328 = CARTESIAN_POINT('',(131.573961,-86.155965,1.51)); +#233329 = VECTOR('',#233330,1.); +#233330 = DIRECTION('',(0.707106483972,0.707107078401,0.)); +#233331 = PLANE('',#233332); +#233332 = AXIS2_PLACEMENT_3D('',#233333,#233334,#233335); +#233333 = CARTESIAN_POINT('',(131.573961,-86.155965,1.51)); +#233334 = DIRECTION('',(-0.707107078401,0.707106483972,0.)); +#233335 = DIRECTION('',(0.707106483972,0.707107078401,0.)); +#233336 = ADVANCED_FACE('',(#233337),#233362,.T.); +#233337 = FACE_BOUND('',#233338,.T.); +#233338 = EDGE_LOOP('',(#233339,#233340,#233348,#233356)); +#233339 = ORIENTED_EDGE('',*,*,#233318,.T.); +#233340 = ORIENTED_EDGE('',*,*,#233341,.T.); +#233341 = EDGE_CURVE('',#233311,#233342,#233344,.T.); +#233342 = VERTEX_POINT('',#233343); +#233343 = CARTESIAN_POINT('',(133.989119,-83.761921,1.545)); +#233344 = LINE('',#233345,#233346); +#233345 = CARTESIAN_POINT('',(133.953071,-83.776853,1.545)); +#233346 = VECTOR('',#233347,1.); +#233347 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233348 = ORIENTED_EDGE('',*,*,#233349,.F.); +#233349 = EDGE_CURVE('',#233350,#233342,#233352,.T.); +#233350 = VERTEX_POINT('',#233351); +#233351 = CARTESIAN_POINT('',(133.989119,-83.761921,1.51)); +#233352 = LINE('',#233353,#233354); +#233353 = CARTESIAN_POINT('',(133.989119,-83.761921,1.51)); +#233354 = VECTOR('',#233355,1.); +#233355 = DIRECTION('',(0.,0.,1.)); +#233356 = ORIENTED_EDGE('',*,*,#233357,.F.); +#233357 = EDGE_CURVE('',#233319,#233350,#233358,.T.); +#233358 = LINE('',#233359,#233360); +#233359 = CARTESIAN_POINT('',(133.953071,-83.776853,1.51)); +#233360 = VECTOR('',#233361,1.); +#233361 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233362 = PLANE('',#233363); +#233363 = AXIS2_PLACEMENT_3D('',#233364,#233365,#233366); +#233364 = CARTESIAN_POINT('',(133.953071,-83.776853,1.51)); +#233365 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#233366 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#233367 = ADVANCED_FACE('',(#233368),#233393,.T.); +#233368 = FACE_BOUND('',#233369,.T.); +#233369 = EDGE_LOOP('',(#233370,#233371,#233379,#233387)); +#233370 = ORIENTED_EDGE('',*,*,#233349,.T.); +#233371 = ORIENTED_EDGE('',*,*,#233372,.T.); +#233372 = EDGE_CURVE('',#233342,#233373,#233375,.T.); +#233373 = VERTEX_POINT('',#233374); +#233374 = CARTESIAN_POINT('',(134.429263,-83.76,1.545)); +#233375 = LINE('',#233376,#233377); +#233376 = CARTESIAN_POINT('',(133.989119,-83.761921,1.545)); +#233377 = VECTOR('',#233378,1.); +#233378 = DIRECTION('',(0.99999047579,4.364439147162E-03,0.)); +#233379 = ORIENTED_EDGE('',*,*,#233380,.F.); +#233380 = EDGE_CURVE('',#233381,#233373,#233383,.T.); +#233381 = VERTEX_POINT('',#233382); +#233382 = CARTESIAN_POINT('',(134.429263,-83.76,1.51)); +#233383 = LINE('',#233384,#233385); +#233384 = CARTESIAN_POINT('',(134.429263,-83.76,1.51)); +#233385 = VECTOR('',#233386,1.); +#233386 = DIRECTION('',(0.,0.,1.)); +#233387 = ORIENTED_EDGE('',*,*,#233388,.F.); +#233388 = EDGE_CURVE('',#233350,#233381,#233389,.T.); +#233389 = LINE('',#233390,#233391); +#233390 = CARTESIAN_POINT('',(133.989119,-83.761921,1.51)); +#233391 = VECTOR('',#233392,1.); +#233392 = DIRECTION('',(0.99999047579,4.364439147162E-03,0.)); +#233393 = PLANE('',#233394); +#233394 = AXIS2_PLACEMENT_3D('',#233395,#233396,#233397); +#233395 = CARTESIAN_POINT('',(133.989119,-83.761921,1.51)); +#233396 = DIRECTION('',(-4.364439147162E-03,0.99999047579,0.)); +#233397 = DIRECTION('',(0.99999047579,4.364439147162E-03,0.)); +#233398 = ADVANCED_FACE('',(#233399),#233424,.T.); +#233399 = FACE_BOUND('',#233400,.T.); +#233400 = EDGE_LOOP('',(#233401,#233402,#233410,#233418)); +#233401 = ORIENTED_EDGE('',*,*,#233380,.T.); +#233402 = ORIENTED_EDGE('',*,*,#233403,.T.); +#233403 = EDGE_CURVE('',#233373,#233404,#233406,.T.); +#233404 = VERTEX_POINT('',#233405); +#233405 = CARTESIAN_POINT('',(134.605,-83.584263,1.545)); +#233406 = LINE('',#233407,#233408); +#233407 = CARTESIAN_POINT('',(134.429263,-83.76,1.545)); +#233408 = VECTOR('',#233409,1.); +#233409 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233410 = ORIENTED_EDGE('',*,*,#233411,.F.); +#233411 = EDGE_CURVE('',#233412,#233404,#233414,.T.); +#233412 = VERTEX_POINT('',#233413); +#233413 = CARTESIAN_POINT('',(134.605,-83.584263,1.51)); +#233414 = LINE('',#233415,#233416); +#233415 = CARTESIAN_POINT('',(134.605,-83.584263,1.51)); +#233416 = VECTOR('',#233417,1.); +#233417 = DIRECTION('',(0.,0.,1.)); +#233418 = ORIENTED_EDGE('',*,*,#233419,.F.); +#233419 = EDGE_CURVE('',#233381,#233412,#233420,.T.); +#233420 = LINE('',#233421,#233422); +#233421 = CARTESIAN_POINT('',(134.429263,-83.76,1.51)); +#233422 = VECTOR('',#233423,1.); +#233423 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233424 = PLANE('',#233425); +#233425 = AXIS2_PLACEMENT_3D('',#233426,#233427,#233428); +#233426 = CARTESIAN_POINT('',(134.429263,-83.76,1.51)); +#233427 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233428 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233429 = ADVANCED_FACE('',(#233430),#233455,.T.); +#233430 = FACE_BOUND('',#233431,.T.); +#233431 = EDGE_LOOP('',(#233432,#233433,#233441,#233449)); +#233432 = ORIENTED_EDGE('',*,*,#233411,.T.); +#233433 = ORIENTED_EDGE('',*,*,#233434,.T.); +#233434 = EDGE_CURVE('',#233404,#233435,#233437,.T.); +#233435 = VERTEX_POINT('',#233436); +#233436 = CARTESIAN_POINT('',(134.606921,-83.440491,1.545)); +#233437 = LINE('',#233438,#233439); +#233438 = CARTESIAN_POINT('',(134.605,-83.584263,1.545)); +#233439 = VECTOR('',#233440,1.); +#233440 = DIRECTION('',(1.336024084604E-02,0.999910747999,0.)); +#233441 = ORIENTED_EDGE('',*,*,#233442,.F.); +#233442 = EDGE_CURVE('',#233443,#233435,#233445,.T.); +#233443 = VERTEX_POINT('',#233444); +#233444 = CARTESIAN_POINT('',(134.606921,-83.440491,1.51)); +#233445 = LINE('',#233446,#233447); +#233446 = CARTESIAN_POINT('',(134.606921,-83.440491,1.51)); +#233447 = VECTOR('',#233448,1.); +#233448 = DIRECTION('',(0.,0.,1.)); +#233449 = ORIENTED_EDGE('',*,*,#233450,.F.); +#233450 = EDGE_CURVE('',#233412,#233443,#233451,.T.); +#233451 = LINE('',#233452,#233453); +#233452 = CARTESIAN_POINT('',(134.605,-83.584263,1.51)); +#233453 = VECTOR('',#233454,1.); +#233454 = DIRECTION('',(1.336024084604E-02,0.999910747999,0.)); +#233455 = PLANE('',#233456); +#233456 = AXIS2_PLACEMENT_3D('',#233457,#233458,#233459); +#233457 = CARTESIAN_POINT('',(134.605,-83.584263,1.51)); +#233458 = DIRECTION('',(-0.999910747999,1.336024084604E-02,0.)); +#233459 = DIRECTION('',(1.336024084604E-02,0.999910747999,0.)); +#233460 = ADVANCED_FACE('',(#233461),#233488,.T.); +#233461 = FACE_BOUND('',#233462,.T.); +#233462 = EDGE_LOOP('',(#233463,#233464,#233473,#233481)); +#233463 = ORIENTED_EDGE('',*,*,#233442,.T.); +#233464 = ORIENTED_EDGE('',*,*,#233465,.T.); +#233465 = EDGE_CURVE('',#233435,#233466,#233468,.T.); +#233466 = VERTEX_POINT('',#233467); +#233467 = CARTESIAN_POINT('',(134.685491,-83.361921,1.545)); +#233468 = CIRCLE('',#233469,0.100002891901); +#233469 = AXIS2_PLACEMENT_3D('',#233470,#233471,#233472); +#233470 = CARTESIAN_POINT('',(134.70500207103,-83.46000207103,1.545)); +#233471 = DIRECTION('',(0.,0.,-1.)); +#233472 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#233473 = ORIENTED_EDGE('',*,*,#233474,.F.); +#233474 = EDGE_CURVE('',#233475,#233466,#233477,.T.); +#233475 = VERTEX_POINT('',#233476); +#233476 = CARTESIAN_POINT('',(134.685491,-83.361921,1.51)); +#233477 = LINE('',#233478,#233479); +#233478 = CARTESIAN_POINT('',(134.685491,-83.361921,1.51)); +#233479 = VECTOR('',#233480,1.); +#233480 = DIRECTION('',(0.,0.,1.)); +#233481 = ORIENTED_EDGE('',*,*,#233482,.F.); +#233482 = EDGE_CURVE('',#233443,#233475,#233483,.T.); +#233483 = CIRCLE('',#233484,0.100002891901); +#233484 = AXIS2_PLACEMENT_3D('',#233485,#233486,#233487); +#233485 = CARTESIAN_POINT('',(134.70500207103,-83.46000207103,1.51)); +#233486 = DIRECTION('',(0.,0.,-1.)); +#233487 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#233488 = CYLINDRICAL_SURFACE('',#233489,0.100002891901); +#233489 = AXIS2_PLACEMENT_3D('',#233490,#233491,#233492); +#233490 = CARTESIAN_POINT('',(134.70500207103,-83.46000207103,1.51)); +#233491 = DIRECTION('',(0.,0.,-1.)); +#233492 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#233493 = ADVANCED_FACE('',(#233494),#233519,.T.); +#233494 = FACE_BOUND('',#233495,.T.); +#233495 = EDGE_LOOP('',(#233496,#233497,#233505,#233513)); +#233496 = ORIENTED_EDGE('',*,*,#233474,.T.); +#233497 = ORIENTED_EDGE('',*,*,#233498,.T.); +#233498 = EDGE_CURVE('',#233466,#233499,#233501,.T.); +#233499 = VERTEX_POINT('',#233500); +#233500 = CARTESIAN_POINT('',(135.475,-83.36,1.545)); +#233501 = LINE('',#233502,#233503); +#233502 = CARTESIAN_POINT('',(134.685491,-83.361921,1.545)); +#233503 = VECTOR('',#233504,1.); +#233504 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#233505 = ORIENTED_EDGE('',*,*,#233506,.F.); +#233506 = EDGE_CURVE('',#233507,#233499,#233509,.T.); +#233507 = VERTEX_POINT('',#233508); +#233508 = CARTESIAN_POINT('',(135.475,-83.36,1.51)); +#233509 = LINE('',#233510,#233511); +#233510 = CARTESIAN_POINT('',(135.475,-83.36,1.51)); +#233511 = VECTOR('',#233512,1.); +#233512 = DIRECTION('',(0.,0.,1.)); +#233513 = ORIENTED_EDGE('',*,*,#233514,.F.); +#233514 = EDGE_CURVE('',#233475,#233507,#233515,.T.); +#233515 = LINE('',#233516,#233517); +#233516 = CARTESIAN_POINT('',(134.685491,-83.361921,1.51)); +#233517 = VECTOR('',#233518,1.); +#233518 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#233519 = PLANE('',#233520); +#233520 = AXIS2_PLACEMENT_3D('',#233521,#233522,#233523); +#233521 = CARTESIAN_POINT('',(134.685491,-83.361921,1.51)); +#233522 = DIRECTION('',(-2.433150620974E-03,0.999997039885,0.)); +#233523 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#233524 = ADVANCED_FACE('',(#233525),#233550,.T.); +#233525 = FACE_BOUND('',#233526,.T.); +#233526 = EDGE_LOOP('',(#233527,#233528,#233536,#233544)); +#233527 = ORIENTED_EDGE('',*,*,#233506,.T.); +#233528 = ORIENTED_EDGE('',*,*,#233529,.T.); +#233529 = EDGE_CURVE('',#233499,#233530,#233532,.T.); +#233530 = VERTEX_POINT('',#233531); +#233531 = CARTESIAN_POINT('',(135.476921,-83.005491,1.545)); +#233532 = LINE('',#233533,#233534); +#233533 = CARTESIAN_POINT('',(135.475,-83.36,1.545)); +#233534 = VECTOR('',#233535,1.); +#233535 = DIRECTION('',(5.418682734386E-03,0.999985318831,0.)); +#233536 = ORIENTED_EDGE('',*,*,#233537,.F.); +#233537 = EDGE_CURVE('',#233538,#233530,#233540,.T.); +#233538 = VERTEX_POINT('',#233539); +#233539 = CARTESIAN_POINT('',(135.476921,-83.005491,1.51)); +#233540 = LINE('',#233541,#233542); +#233541 = CARTESIAN_POINT('',(135.476921,-83.005491,1.51)); +#233542 = VECTOR('',#233543,1.); +#233543 = DIRECTION('',(0.,0.,1.)); +#233544 = ORIENTED_EDGE('',*,*,#233545,.F.); +#233545 = EDGE_CURVE('',#233507,#233538,#233546,.T.); +#233546 = LINE('',#233547,#233548); +#233547 = CARTESIAN_POINT('',(135.475,-83.36,1.51)); +#233548 = VECTOR('',#233549,1.); +#233549 = DIRECTION('',(5.418682734386E-03,0.999985318831,0.)); +#233550 = PLANE('',#233551); +#233551 = AXIS2_PLACEMENT_3D('',#233552,#233553,#233554); +#233552 = CARTESIAN_POINT('',(135.475,-83.36,1.51)); +#233553 = DIRECTION('',(-0.999985318831,5.418682734386E-03,0.)); +#233554 = DIRECTION('',(5.418682734386E-03,0.999985318831,0.)); +#233555 = ADVANCED_FACE('',(#233556),#233581,.T.); +#233556 = FACE_BOUND('',#233557,.T.); +#233557 = EDGE_LOOP('',(#233558,#233559,#233567,#233575)); +#233558 = ORIENTED_EDGE('',*,*,#233537,.T.); +#233559 = ORIENTED_EDGE('',*,*,#233560,.T.); +#233560 = EDGE_CURVE('',#233530,#233561,#233563,.T.); +#233561 = VERTEX_POINT('',#233562); +#233562 = CARTESIAN_POINT('',(135.491853,-82.969443,1.545)); +#233563 = LINE('',#233564,#233565); +#233564 = CARTESIAN_POINT('',(135.476921,-83.005491,1.545)); +#233565 = VECTOR('',#233566,1.); +#233566 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233567 = ORIENTED_EDGE('',*,*,#233568,.F.); +#233568 = EDGE_CURVE('',#233569,#233561,#233571,.T.); +#233569 = VERTEX_POINT('',#233570); +#233570 = CARTESIAN_POINT('',(135.491853,-82.969443,1.51)); +#233571 = LINE('',#233572,#233573); +#233572 = CARTESIAN_POINT('',(135.491853,-82.969443,1.51)); +#233573 = VECTOR('',#233574,1.); +#233574 = DIRECTION('',(0.,0.,1.)); +#233575 = ORIENTED_EDGE('',*,*,#233576,.F.); +#233576 = EDGE_CURVE('',#233538,#233569,#233577,.T.); +#233577 = LINE('',#233578,#233579); +#233578 = CARTESIAN_POINT('',(135.476921,-83.005491,1.51)); +#233579 = VECTOR('',#233580,1.); +#233580 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233581 = PLANE('',#233582); +#233582 = AXIS2_PLACEMENT_3D('',#233583,#233584,#233585); +#233583 = CARTESIAN_POINT('',(135.476921,-83.005491,1.51)); +#233584 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#233585 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233586 = ADVANCED_FACE('',(#233587),#233612,.T.); +#233587 = FACE_BOUND('',#233588,.T.); +#233588 = EDGE_LOOP('',(#233589,#233590,#233598,#233606)); +#233589 = ORIENTED_EDGE('',*,*,#233568,.T.); +#233590 = ORIENTED_EDGE('',*,*,#233591,.T.); +#233591 = EDGE_CURVE('',#233561,#233592,#233594,.T.); +#233592 = VERTEX_POINT('',#233593); +#233593 = CARTESIAN_POINT('',(135.995,-82.463578,1.545)); +#233594 = LINE('',#233595,#233596); +#233595 = CARTESIAN_POINT('',(135.491853,-82.969443,1.545)); +#233596 = VECTOR('',#233597,1.); +#233597 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#233598 = ORIENTED_EDGE('',*,*,#233599,.F.); +#233599 = EDGE_CURVE('',#233600,#233592,#233602,.T.); +#233600 = VERTEX_POINT('',#233601); +#233601 = CARTESIAN_POINT('',(135.995,-82.463578,1.51)); +#233602 = LINE('',#233603,#233604); +#233603 = CARTESIAN_POINT('',(135.995,-82.463578,1.51)); +#233604 = VECTOR('',#233605,1.); +#233605 = DIRECTION('',(0.,0.,1.)); +#233606 = ORIENTED_EDGE('',*,*,#233607,.F.); +#233607 = EDGE_CURVE('',#233569,#233600,#233608,.T.); +#233608 = LINE('',#233609,#233610); +#233609 = CARTESIAN_POINT('',(135.491853,-82.969443,1.51)); +#233610 = VECTOR('',#233611,1.); +#233611 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#233612 = PLANE('',#233613); +#233613 = AXIS2_PLACEMENT_3D('',#233614,#233615,#233616); +#233614 = CARTESIAN_POINT('',(135.491853,-82.969443,1.51)); +#233615 = DIRECTION('',(-0.709008959472,0.705199472056,0.)); +#233616 = DIRECTION('',(0.705199472056,0.709008959472,0.)); +#233617 = ADVANCED_FACE('',(#233618),#233643,.T.); +#233618 = FACE_BOUND('',#233619,.T.); +#233619 = EDGE_LOOP('',(#233620,#233621,#233629,#233637)); +#233620 = ORIENTED_EDGE('',*,*,#233599,.T.); +#233621 = ORIENTED_EDGE('',*,*,#233622,.T.); +#233622 = EDGE_CURVE('',#233592,#233623,#233625,.T.); +#233623 = VERTEX_POINT('',#233624); +#233624 = CARTESIAN_POINT('',(135.996921,-82.390491,1.545)); +#233625 = LINE('',#233626,#233627); +#233626 = CARTESIAN_POINT('',(135.995,-82.463578,1.545)); +#233627 = VECTOR('',#233628,1.); +#233628 = DIRECTION('',(2.627466986434E-02,0.999654761267,0.)); +#233629 = ORIENTED_EDGE('',*,*,#233630,.F.); +#233630 = EDGE_CURVE('',#233631,#233623,#233633,.T.); +#233631 = VERTEX_POINT('',#233632); +#233632 = CARTESIAN_POINT('',(135.996921,-82.390491,1.51)); +#233633 = LINE('',#233634,#233635); +#233634 = CARTESIAN_POINT('',(135.996921,-82.390491,1.51)); +#233635 = VECTOR('',#233636,1.); +#233636 = DIRECTION('',(0.,0.,1.)); +#233637 = ORIENTED_EDGE('',*,*,#233638,.F.); +#233638 = EDGE_CURVE('',#233600,#233631,#233639,.T.); +#233639 = LINE('',#233640,#233641); +#233640 = CARTESIAN_POINT('',(135.995,-82.463578,1.51)); +#233641 = VECTOR('',#233642,1.); +#233642 = DIRECTION('',(2.627466986434E-02,0.999654761267,0.)); +#233643 = PLANE('',#233644); +#233644 = AXIS2_PLACEMENT_3D('',#233645,#233646,#233647); +#233645 = CARTESIAN_POINT('',(135.995,-82.463578,1.51)); +#233646 = DIRECTION('',(-0.999654761267,2.627466986434E-02,0.)); +#233647 = DIRECTION('',(2.627466986434E-02,0.999654761267,0.)); +#233648 = ADVANCED_FACE('',(#233649),#233674,.T.); +#233649 = FACE_BOUND('',#233650,.T.); +#233650 = EDGE_LOOP('',(#233651,#233652,#233660,#233668)); +#233651 = ORIENTED_EDGE('',*,*,#233630,.T.); +#233652 = ORIENTED_EDGE('',*,*,#233653,.T.); +#233653 = EDGE_CURVE('',#233623,#233654,#233656,.T.); +#233654 = VERTEX_POINT('',#233655); +#233655 = CARTESIAN_POINT('',(136.011853,-82.354443,1.545)); +#233656 = LINE('',#233657,#233658); +#233657 = CARTESIAN_POINT('',(135.996921,-82.390491,1.545)); +#233658 = VECTOR('',#233659,1.); +#233659 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233660 = ORIENTED_EDGE('',*,*,#233661,.F.); +#233661 = EDGE_CURVE('',#233662,#233654,#233664,.T.); +#233662 = VERTEX_POINT('',#233663); +#233663 = CARTESIAN_POINT('',(136.011853,-82.354443,1.51)); +#233664 = LINE('',#233665,#233666); +#233665 = CARTESIAN_POINT('',(136.011853,-82.354443,1.51)); +#233666 = VECTOR('',#233667,1.); +#233667 = DIRECTION('',(0.,0.,1.)); +#233668 = ORIENTED_EDGE('',*,*,#233669,.F.); +#233669 = EDGE_CURVE('',#233631,#233662,#233670,.T.); +#233670 = LINE('',#233671,#233672); +#233671 = CARTESIAN_POINT('',(135.996921,-82.390491,1.51)); +#233672 = VECTOR('',#233673,1.); +#233673 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233674 = PLANE('',#233675); +#233675 = AXIS2_PLACEMENT_3D('',#233676,#233677,#233678); +#233676 = CARTESIAN_POINT('',(135.996921,-82.390491,1.51)); +#233677 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#233678 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#233679 = ADVANCED_FACE('',(#233680),#233696,.T.); +#233680 = FACE_BOUND('',#233681,.T.); +#233681 = EDGE_LOOP('',(#233682,#233683,#233689,#233690)); +#233682 = ORIENTED_EDGE('',*,*,#233661,.T.); +#233683 = ORIENTED_EDGE('',*,*,#233684,.T.); +#233684 = EDGE_CURVE('',#233654,#231003,#233685,.T.); +#233685 = LINE('',#233686,#233687); +#233686 = CARTESIAN_POINT('',(136.011853,-82.354443,1.545)); +#233687 = VECTOR('',#233688,1.); +#233688 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233689 = ORIENTED_EDGE('',*,*,#231000,.F.); +#233690 = ORIENTED_EDGE('',*,*,#233691,.F.); +#233691 = EDGE_CURVE('',#233662,#231001,#233692,.T.); +#233692 = LINE('',#233693,#233694); +#233693 = CARTESIAN_POINT('',(136.011853,-82.354443,1.51)); +#233694 = VECTOR('',#233695,1.); +#233695 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233696 = PLANE('',#233697); +#233697 = AXIS2_PLACEMENT_3D('',#233698,#233699,#233700); +#233698 = CARTESIAN_POINT('',(136.011853,-82.354443,1.51)); +#233699 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#233700 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#233701 = ADVANCED_FACE('',(#233702),#233791,.F.); +#233702 = FACE_BOUND('',#233703,.T.); +#233703 = EDGE_LOOP('',(#233704,#233705,#233706,#233707,#233708,#233709, + #233710,#233711,#233712,#233713,#233714,#233715,#233716,#233717, + #233718,#233719,#233720,#233721,#233722,#233723,#233724,#233725, + #233726,#233727,#233728,#233729,#233730,#233731,#233732,#233733, + #233734,#233735,#233736,#233737,#233738,#233739,#233740,#233741, + #233742,#233743,#233744,#233745,#233746,#233747,#233748,#233749, + #233750,#233751,#233752,#233753,#233754,#233755,#233756,#233757, + #233758,#233759,#233760,#233761,#233762,#233763,#233764,#233765, + #233766,#233767,#233768,#233769,#233770,#233771,#233772,#233773, + #233774,#233775,#233776,#233777,#233778,#233779,#233780,#233781, + #233782,#233783,#233784,#233785,#233786,#233787,#233788,#233789, + #233790)); +#233704 = ORIENTED_EDGE('',*,*,#231027,.T.); +#233705 = ORIENTED_EDGE('',*,*,#231059,.T.); +#233706 = ORIENTED_EDGE('',*,*,#231090,.T.); +#233707 = ORIENTED_EDGE('',*,*,#231121,.T.); +#233708 = ORIENTED_EDGE('',*,*,#231152,.T.); +#233709 = ORIENTED_EDGE('',*,*,#231184,.T.); +#233710 = ORIENTED_EDGE('',*,*,#231216,.T.); +#233711 = ORIENTED_EDGE('',*,*,#231247,.T.); +#233712 = ORIENTED_EDGE('',*,*,#231278,.T.); +#233713 = ORIENTED_EDGE('',*,*,#231309,.T.); +#233714 = ORIENTED_EDGE('',*,*,#231340,.T.); +#233715 = ORIENTED_EDGE('',*,*,#231371,.T.); +#233716 = ORIENTED_EDGE('',*,*,#231402,.T.); +#233717 = ORIENTED_EDGE('',*,*,#231433,.T.); +#233718 = ORIENTED_EDGE('',*,*,#231464,.T.); +#233719 = ORIENTED_EDGE('',*,*,#231495,.T.); +#233720 = ORIENTED_EDGE('',*,*,#231526,.T.); +#233721 = ORIENTED_EDGE('',*,*,#231557,.T.); +#233722 = ORIENTED_EDGE('',*,*,#231588,.T.); +#233723 = ORIENTED_EDGE('',*,*,#231619,.T.); +#233724 = ORIENTED_EDGE('',*,*,#231650,.T.); +#233725 = ORIENTED_EDGE('',*,*,#231681,.T.); +#233726 = ORIENTED_EDGE('',*,*,#231712,.T.); +#233727 = ORIENTED_EDGE('',*,*,#231743,.T.); +#233728 = ORIENTED_EDGE('',*,*,#231774,.T.); +#233729 = ORIENTED_EDGE('',*,*,#231805,.T.); +#233730 = ORIENTED_EDGE('',*,*,#231836,.T.); +#233731 = ORIENTED_EDGE('',*,*,#231867,.T.); +#233732 = ORIENTED_EDGE('',*,*,#231898,.T.); +#233733 = ORIENTED_EDGE('',*,*,#231929,.T.); +#233734 = ORIENTED_EDGE('',*,*,#231960,.T.); +#233735 = ORIENTED_EDGE('',*,*,#231991,.T.); +#233736 = ORIENTED_EDGE('',*,*,#232022,.T.); +#233737 = ORIENTED_EDGE('',*,*,#232053,.T.); +#233738 = ORIENTED_EDGE('',*,*,#232084,.T.); +#233739 = ORIENTED_EDGE('',*,*,#232115,.T.); +#233740 = ORIENTED_EDGE('',*,*,#232146,.T.); +#233741 = ORIENTED_EDGE('',*,*,#232177,.T.); +#233742 = ORIENTED_EDGE('',*,*,#232208,.T.); +#233743 = ORIENTED_EDGE('',*,*,#232239,.T.); +#233744 = ORIENTED_EDGE('',*,*,#232270,.T.); +#233745 = ORIENTED_EDGE('',*,*,#232301,.T.); +#233746 = ORIENTED_EDGE('',*,*,#232332,.T.); +#233747 = ORIENTED_EDGE('',*,*,#232363,.T.); +#233748 = ORIENTED_EDGE('',*,*,#232395,.T.); +#233749 = ORIENTED_EDGE('',*,*,#232427,.T.); +#233750 = ORIENTED_EDGE('',*,*,#232458,.T.); +#233751 = ORIENTED_EDGE('',*,*,#232489,.T.); +#233752 = ORIENTED_EDGE('',*,*,#232520,.T.); +#233753 = ORIENTED_EDGE('',*,*,#232551,.T.); +#233754 = ORIENTED_EDGE('',*,*,#232582,.T.); +#233755 = ORIENTED_EDGE('',*,*,#232613,.T.); +#233756 = ORIENTED_EDGE('',*,*,#232644,.T.); +#233757 = ORIENTED_EDGE('',*,*,#232675,.T.); +#233758 = ORIENTED_EDGE('',*,*,#232706,.T.); +#233759 = ORIENTED_EDGE('',*,*,#232737,.T.); +#233760 = ORIENTED_EDGE('',*,*,#232768,.T.); +#233761 = ORIENTED_EDGE('',*,*,#232799,.T.); +#233762 = ORIENTED_EDGE('',*,*,#232830,.T.); +#233763 = ORIENTED_EDGE('',*,*,#232861,.T.); +#233764 = ORIENTED_EDGE('',*,*,#232892,.T.); +#233765 = ORIENTED_EDGE('',*,*,#232923,.T.); +#233766 = ORIENTED_EDGE('',*,*,#232954,.T.); +#233767 = ORIENTED_EDGE('',*,*,#232985,.T.); +#233768 = ORIENTED_EDGE('',*,*,#233016,.T.); +#233769 = ORIENTED_EDGE('',*,*,#233047,.T.); +#233770 = ORIENTED_EDGE('',*,*,#233078,.T.); +#233771 = ORIENTED_EDGE('',*,*,#233109,.T.); +#233772 = ORIENTED_EDGE('',*,*,#233140,.T.); +#233773 = ORIENTED_EDGE('',*,*,#233171,.T.); +#233774 = ORIENTED_EDGE('',*,*,#233202,.T.); +#233775 = ORIENTED_EDGE('',*,*,#233233,.T.); +#233776 = ORIENTED_EDGE('',*,*,#233264,.T.); +#233777 = ORIENTED_EDGE('',*,*,#233295,.T.); +#233778 = ORIENTED_EDGE('',*,*,#233326,.T.); +#233779 = ORIENTED_EDGE('',*,*,#233357,.T.); +#233780 = ORIENTED_EDGE('',*,*,#233388,.T.); +#233781 = ORIENTED_EDGE('',*,*,#233419,.T.); +#233782 = ORIENTED_EDGE('',*,*,#233450,.T.); +#233783 = ORIENTED_EDGE('',*,*,#233482,.T.); +#233784 = ORIENTED_EDGE('',*,*,#233514,.T.); +#233785 = ORIENTED_EDGE('',*,*,#233545,.T.); +#233786 = ORIENTED_EDGE('',*,*,#233576,.T.); +#233787 = ORIENTED_EDGE('',*,*,#233607,.T.); +#233788 = ORIENTED_EDGE('',*,*,#233638,.T.); +#233789 = ORIENTED_EDGE('',*,*,#233669,.T.); +#233790 = ORIENTED_EDGE('',*,*,#233691,.T.); +#233791 = PLANE('',#233792); +#233792 = AXIS2_PLACEMENT_3D('',#233793,#233794,#233795); +#233793 = CARTESIAN_POINT('',(0.,0.,1.51)); +#233794 = DIRECTION('',(0.,0.,1.)); +#233795 = DIRECTION('',(1.,0.,-0.)); +#233796 = ADVANCED_FACE('',(#233797),#233886,.T.); +#233797 = FACE_BOUND('',#233798,.F.); +#233798 = EDGE_LOOP('',(#233799,#233800,#233801,#233802,#233803,#233804, + #233805,#233806,#233807,#233808,#233809,#233810,#233811,#233812, + #233813,#233814,#233815,#233816,#233817,#233818,#233819,#233820, + #233821,#233822,#233823,#233824,#233825,#233826,#233827,#233828, + #233829,#233830,#233831,#233832,#233833,#233834,#233835,#233836, + #233837,#233838,#233839,#233840,#233841,#233842,#233843,#233844, + #233845,#233846,#233847,#233848,#233849,#233850,#233851,#233852, + #233853,#233854,#233855,#233856,#233857,#233858,#233859,#233860, + #233861,#233862,#233863,#233864,#233865,#233866,#233867,#233868, + #233869,#233870,#233871,#233872,#233873,#233874,#233875,#233876, + #233877,#233878,#233879,#233880,#233881,#233882,#233883,#233884, + #233885)); +#233799 = ORIENTED_EDGE('',*,*,#231010,.T.); +#233800 = ORIENTED_EDGE('',*,*,#231043,.T.); +#233801 = ORIENTED_EDGE('',*,*,#231074,.T.); +#233802 = ORIENTED_EDGE('',*,*,#231105,.T.); +#233803 = ORIENTED_EDGE('',*,*,#231136,.T.); +#233804 = ORIENTED_EDGE('',*,*,#231167,.T.); +#233805 = ORIENTED_EDGE('',*,*,#231200,.T.); +#233806 = ORIENTED_EDGE('',*,*,#231231,.T.); +#233807 = ORIENTED_EDGE('',*,*,#231262,.T.); +#233808 = ORIENTED_EDGE('',*,*,#231293,.T.); +#233809 = ORIENTED_EDGE('',*,*,#231324,.T.); +#233810 = ORIENTED_EDGE('',*,*,#231355,.T.); +#233811 = ORIENTED_EDGE('',*,*,#231386,.T.); +#233812 = ORIENTED_EDGE('',*,*,#231417,.T.); +#233813 = ORIENTED_EDGE('',*,*,#231448,.T.); +#233814 = ORIENTED_EDGE('',*,*,#231479,.T.); +#233815 = ORIENTED_EDGE('',*,*,#231510,.T.); +#233816 = ORIENTED_EDGE('',*,*,#231541,.T.); +#233817 = ORIENTED_EDGE('',*,*,#231572,.T.); +#233818 = ORIENTED_EDGE('',*,*,#231603,.T.); +#233819 = ORIENTED_EDGE('',*,*,#231634,.T.); +#233820 = ORIENTED_EDGE('',*,*,#231665,.T.); +#233821 = ORIENTED_EDGE('',*,*,#231696,.T.); +#233822 = ORIENTED_EDGE('',*,*,#231727,.T.); +#233823 = ORIENTED_EDGE('',*,*,#231758,.T.); +#233824 = ORIENTED_EDGE('',*,*,#231789,.T.); +#233825 = ORIENTED_EDGE('',*,*,#231820,.T.); +#233826 = ORIENTED_EDGE('',*,*,#231851,.T.); +#233827 = ORIENTED_EDGE('',*,*,#231882,.T.); +#233828 = ORIENTED_EDGE('',*,*,#231913,.T.); +#233829 = ORIENTED_EDGE('',*,*,#231944,.T.); +#233830 = ORIENTED_EDGE('',*,*,#231975,.T.); +#233831 = ORIENTED_EDGE('',*,*,#232006,.T.); +#233832 = ORIENTED_EDGE('',*,*,#232037,.T.); +#233833 = ORIENTED_EDGE('',*,*,#232068,.T.); +#233834 = ORIENTED_EDGE('',*,*,#232099,.T.); +#233835 = ORIENTED_EDGE('',*,*,#232130,.T.); +#233836 = ORIENTED_EDGE('',*,*,#232161,.T.); +#233837 = ORIENTED_EDGE('',*,*,#232192,.T.); +#233838 = ORIENTED_EDGE('',*,*,#232223,.T.); +#233839 = ORIENTED_EDGE('',*,*,#232254,.T.); +#233840 = ORIENTED_EDGE('',*,*,#232285,.T.); +#233841 = ORIENTED_EDGE('',*,*,#232316,.T.); +#233842 = ORIENTED_EDGE('',*,*,#232347,.T.); +#233843 = ORIENTED_EDGE('',*,*,#232378,.T.); +#233844 = ORIENTED_EDGE('',*,*,#232411,.T.); +#233845 = ORIENTED_EDGE('',*,*,#232442,.T.); +#233846 = ORIENTED_EDGE('',*,*,#232473,.T.); +#233847 = ORIENTED_EDGE('',*,*,#232504,.T.); +#233848 = ORIENTED_EDGE('',*,*,#232535,.T.); +#233849 = ORIENTED_EDGE('',*,*,#232566,.T.); +#233850 = ORIENTED_EDGE('',*,*,#232597,.T.); +#233851 = ORIENTED_EDGE('',*,*,#232628,.T.); +#233852 = ORIENTED_EDGE('',*,*,#232659,.T.); +#233853 = ORIENTED_EDGE('',*,*,#232690,.T.); +#233854 = ORIENTED_EDGE('',*,*,#232721,.T.); +#233855 = ORIENTED_EDGE('',*,*,#232752,.T.); +#233856 = ORIENTED_EDGE('',*,*,#232783,.T.); +#233857 = ORIENTED_EDGE('',*,*,#232814,.T.); +#233858 = ORIENTED_EDGE('',*,*,#232845,.T.); +#233859 = ORIENTED_EDGE('',*,*,#232876,.T.); +#233860 = ORIENTED_EDGE('',*,*,#232907,.T.); +#233861 = ORIENTED_EDGE('',*,*,#232938,.T.); +#233862 = ORIENTED_EDGE('',*,*,#232969,.T.); +#233863 = ORIENTED_EDGE('',*,*,#233000,.T.); +#233864 = ORIENTED_EDGE('',*,*,#233031,.T.); +#233865 = ORIENTED_EDGE('',*,*,#233062,.T.); +#233866 = ORIENTED_EDGE('',*,*,#233093,.T.); +#233867 = ORIENTED_EDGE('',*,*,#233124,.T.); +#233868 = ORIENTED_EDGE('',*,*,#233155,.T.); +#233869 = ORIENTED_EDGE('',*,*,#233186,.T.); +#233870 = ORIENTED_EDGE('',*,*,#233217,.T.); +#233871 = ORIENTED_EDGE('',*,*,#233248,.T.); +#233872 = ORIENTED_EDGE('',*,*,#233279,.T.); +#233873 = ORIENTED_EDGE('',*,*,#233310,.T.); +#233874 = ORIENTED_EDGE('',*,*,#233341,.T.); +#233875 = ORIENTED_EDGE('',*,*,#233372,.T.); +#233876 = ORIENTED_EDGE('',*,*,#233403,.T.); +#233877 = ORIENTED_EDGE('',*,*,#233434,.T.); +#233878 = ORIENTED_EDGE('',*,*,#233465,.T.); +#233879 = ORIENTED_EDGE('',*,*,#233498,.T.); +#233880 = ORIENTED_EDGE('',*,*,#233529,.T.); +#233881 = ORIENTED_EDGE('',*,*,#233560,.T.); +#233882 = ORIENTED_EDGE('',*,*,#233591,.T.); +#233883 = ORIENTED_EDGE('',*,*,#233622,.T.); +#233884 = ORIENTED_EDGE('',*,*,#233653,.T.); +#233885 = ORIENTED_EDGE('',*,*,#233684,.T.); +#233886 = PLANE('',#233887); +#233887 = AXIS2_PLACEMENT_3D('',#233888,#233889,#233890); +#233888 = CARTESIAN_POINT('',(0.,0.,1.545)); +#233889 = DIRECTION('',(0.,0.,1.)); +#233890 = DIRECTION('',(1.,0.,-0.)); +#233891 = MANIFOLD_SOLID_BREP('',#233892); +#233892 = CLOSED_SHELL('',(#233893,#233935,#233966,#233999,#234030, + #234061,#234094,#234125,#234156,#234187,#234218,#234249,#234280, + #234311,#234342,#234373,#234404,#234435,#234466,#234497,#234528, + #234559,#234590,#234621,#234652,#234683,#234714,#234745,#234776, + #234809,#234840,#234871,#234902,#234933,#234964,#234995,#235026, + #235057,#235088,#235119,#235150,#235181,#235212,#235243,#235274, + #235305,#235336,#235367,#235398,#235429,#235460,#235491,#235522, + #235553,#235584,#235606,#235669)); +#233893 = ADVANCED_FACE('',(#233894),#233930,.T.); +#233894 = FACE_BOUND('',#233895,.T.); +#233895 = EDGE_LOOP('',(#233896,#233906,#233915,#233923)); +#233896 = ORIENTED_EDGE('',*,*,#233897,.T.); +#233897 = EDGE_CURVE('',#233898,#233900,#233902,.T.); +#233898 = VERTEX_POINT('',#233899); +#233899 = CARTESIAN_POINT('',(134.206921,-82.390491,1.51)); +#233900 = VERTEX_POINT('',#233901); +#233901 = CARTESIAN_POINT('',(134.206921,-82.390491,1.545)); +#233902 = LINE('',#233903,#233904); +#233903 = CARTESIAN_POINT('',(134.206921,-82.390491,1.51)); +#233904 = VECTOR('',#233905,1.); +#233905 = DIRECTION('',(0.,0.,1.)); +#233906 = ORIENTED_EDGE('',*,*,#233907,.T.); +#233907 = EDGE_CURVE('',#233900,#233908,#233910,.T.); +#233908 = VERTEX_POINT('',#233909); +#233909 = CARTESIAN_POINT('',(134.285491,-82.311921,1.545)); +#233910 = CIRCLE('',#233911,0.100002891901); +#233911 = AXIS2_PLACEMENT_3D('',#233912,#233913,#233914); +#233912 = CARTESIAN_POINT('',(134.30500207103,-82.41000207103,1.545)); +#233913 = DIRECTION('',(0.,0.,-1.)); +#233914 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#233915 = ORIENTED_EDGE('',*,*,#233916,.F.); +#233916 = EDGE_CURVE('',#233917,#233908,#233919,.T.); +#233917 = VERTEX_POINT('',#233918); +#233918 = CARTESIAN_POINT('',(134.285491,-82.311921,1.51)); +#233919 = LINE('',#233920,#233921); +#233920 = CARTESIAN_POINT('',(134.285491,-82.311921,1.51)); +#233921 = VECTOR('',#233922,1.); +#233922 = DIRECTION('',(0.,0.,1.)); +#233923 = ORIENTED_EDGE('',*,*,#233924,.F.); +#233924 = EDGE_CURVE('',#233898,#233917,#233925,.T.); +#233925 = CIRCLE('',#233926,0.100002891901); +#233926 = AXIS2_PLACEMENT_3D('',#233927,#233928,#233929); +#233927 = CARTESIAN_POINT('',(134.30500207103,-82.41000207103,1.51)); +#233928 = DIRECTION('',(0.,0.,-1.)); +#233929 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#233930 = CYLINDRICAL_SURFACE('',#233931,0.100002891901); +#233931 = AXIS2_PLACEMENT_3D('',#233932,#233933,#233934); +#233932 = CARTESIAN_POINT('',(134.30500207103,-82.41000207103,1.51)); +#233933 = DIRECTION('',(0.,0.,-1.)); +#233934 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#233935 = ADVANCED_FACE('',(#233936),#233961,.T.); +#233936 = FACE_BOUND('',#233937,.T.); +#233937 = EDGE_LOOP('',(#233938,#233939,#233947,#233955)); +#233938 = ORIENTED_EDGE('',*,*,#233916,.T.); +#233939 = ORIENTED_EDGE('',*,*,#233940,.T.); +#233940 = EDGE_CURVE('',#233908,#233941,#233943,.T.); +#233941 = VERTEX_POINT('',#233942); +#233942 = CARTESIAN_POINT('',(134.844509,-82.311921,1.545)); +#233943 = LINE('',#233944,#233945); +#233944 = CARTESIAN_POINT('',(134.285491,-82.311921,1.545)); +#233945 = VECTOR('',#233946,1.); +#233946 = DIRECTION('',(1.,0.,0.)); +#233947 = ORIENTED_EDGE('',*,*,#233948,.F.); +#233948 = EDGE_CURVE('',#233949,#233941,#233951,.T.); +#233949 = VERTEX_POINT('',#233950); +#233950 = CARTESIAN_POINT('',(134.844509,-82.311921,1.51)); +#233951 = LINE('',#233952,#233953); +#233952 = CARTESIAN_POINT('',(134.844509,-82.311921,1.51)); +#233953 = VECTOR('',#233954,1.); +#233954 = DIRECTION('',(0.,0.,1.)); +#233955 = ORIENTED_EDGE('',*,*,#233956,.F.); +#233956 = EDGE_CURVE('',#233917,#233949,#233957,.T.); +#233957 = LINE('',#233958,#233959); +#233958 = CARTESIAN_POINT('',(134.285491,-82.311921,1.51)); +#233959 = VECTOR('',#233960,1.); +#233960 = DIRECTION('',(1.,0.,0.)); +#233961 = PLANE('',#233962); +#233962 = AXIS2_PLACEMENT_3D('',#233963,#233964,#233965); +#233963 = CARTESIAN_POINT('',(134.285491,-82.311921,1.51)); +#233964 = DIRECTION('',(0.,1.,0.)); +#233965 = DIRECTION('',(1.,0.,0.)); +#233966 = ADVANCED_FACE('',(#233967),#233994,.T.); +#233967 = FACE_BOUND('',#233968,.T.); +#233968 = EDGE_LOOP('',(#233969,#233970,#233979,#233987)); +#233969 = ORIENTED_EDGE('',*,*,#233948,.T.); +#233970 = ORIENTED_EDGE('',*,*,#233971,.T.); +#233971 = EDGE_CURVE('',#233941,#233972,#233974,.T.); +#233972 = VERTEX_POINT('',#233973); +#233973 = CARTESIAN_POINT('',(134.844509,-82.508079,1.545)); +#233974 = CIRCLE('',#233975,0.100000456609); +#233975 = AXIS2_PLACEMENT_3D('',#233976,#233977,#233978); +#233976 = CARTESIAN_POINT('',(134.825,-82.41,1.545)); +#233977 = DIRECTION('',(0.,0.,-1.)); +#233978 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#233979 = ORIENTED_EDGE('',*,*,#233980,.F.); +#233980 = EDGE_CURVE('',#233981,#233972,#233983,.T.); +#233981 = VERTEX_POINT('',#233982); +#233982 = CARTESIAN_POINT('',(134.844509,-82.508079,1.51)); +#233983 = LINE('',#233984,#233985); +#233984 = CARTESIAN_POINT('',(134.844509,-82.508079,1.51)); +#233985 = VECTOR('',#233986,1.); +#233986 = DIRECTION('',(0.,0.,1.)); +#233987 = ORIENTED_EDGE('',*,*,#233988,.F.); +#233988 = EDGE_CURVE('',#233949,#233981,#233989,.T.); +#233989 = CIRCLE('',#233990,0.100000456609); +#233990 = AXIS2_PLACEMENT_3D('',#233991,#233992,#233993); +#233991 = CARTESIAN_POINT('',(134.825,-82.41,1.51)); +#233992 = DIRECTION('',(0.,0.,-1.)); +#233993 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#233994 = CYLINDRICAL_SURFACE('',#233995,0.100000456609); +#233995 = AXIS2_PLACEMENT_3D('',#233996,#233997,#233998); +#233996 = CARTESIAN_POINT('',(134.825,-82.41,1.51)); +#233997 = DIRECTION('',(0.,0.,-1.)); +#233998 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#233999 = ADVANCED_FACE('',(#234000),#234025,.T.); +#234000 = FACE_BOUND('',#234001,.T.); +#234001 = EDGE_LOOP('',(#234002,#234003,#234011,#234019)); +#234002 = ORIENTED_EDGE('',*,*,#233980,.T.); +#234003 = ORIENTED_EDGE('',*,*,#234004,.T.); +#234004 = EDGE_CURVE('',#233972,#234005,#234007,.T.); +#234005 = VERTEX_POINT('',#234006); +#234006 = CARTESIAN_POINT('',(134.405,-82.51,1.545)); +#234007 = LINE('',#234008,#234009); +#234008 = CARTESIAN_POINT('',(134.844509,-82.508079,1.545)); +#234009 = VECTOR('',#234010,1.); +#234010 = DIRECTION('',(-0.99999044825,-4.37074474265E-03,0.)); +#234011 = ORIENTED_EDGE('',*,*,#234012,.F.); +#234012 = EDGE_CURVE('',#234013,#234005,#234015,.T.); +#234013 = VERTEX_POINT('',#234014); +#234014 = CARTESIAN_POINT('',(134.405,-82.51,1.51)); +#234015 = LINE('',#234016,#234017); +#234016 = CARTESIAN_POINT('',(134.405,-82.51,1.51)); +#234017 = VECTOR('',#234018,1.); +#234018 = DIRECTION('',(0.,0.,1.)); +#234019 = ORIENTED_EDGE('',*,*,#234020,.F.); +#234020 = EDGE_CURVE('',#233981,#234013,#234021,.T.); +#234021 = LINE('',#234022,#234023); +#234022 = CARTESIAN_POINT('',(134.844509,-82.508079,1.51)); +#234023 = VECTOR('',#234024,1.); +#234024 = DIRECTION('',(-0.99999044825,-4.37074474265E-03,0.)); +#234025 = PLANE('',#234026); +#234026 = AXIS2_PLACEMENT_3D('',#234027,#234028,#234029); +#234027 = CARTESIAN_POINT('',(134.844509,-82.508079,1.51)); +#234028 = DIRECTION('',(4.37074474265E-03,-0.99999044825,0.)); +#234029 = DIRECTION('',(-0.99999044825,-4.37074474265E-03,0.)); +#234030 = ADVANCED_FACE('',(#234031),#234056,.T.); +#234031 = FACE_BOUND('',#234032,.T.); +#234032 = EDGE_LOOP('',(#234033,#234034,#234042,#234050)); +#234033 = ORIENTED_EDGE('',*,*,#234012,.T.); +#234034 = ORIENTED_EDGE('',*,*,#234035,.T.); +#234035 = EDGE_CURVE('',#234005,#234036,#234038,.T.); +#234036 = VERTEX_POINT('',#234037); +#234037 = CARTESIAN_POINT('',(134.403079,-83.479509,1.545)); +#234038 = LINE('',#234039,#234040); +#234039 = CARTESIAN_POINT('',(134.405,-82.51,1.545)); +#234040 = VECTOR('',#234041,1.); +#234041 = DIRECTION('',(-1.981411445476E-03,-0.999998037002,0.)); +#234042 = ORIENTED_EDGE('',*,*,#234043,.F.); +#234043 = EDGE_CURVE('',#234044,#234036,#234046,.T.); +#234044 = VERTEX_POINT('',#234045); +#234045 = CARTESIAN_POINT('',(134.403079,-83.479509,1.51)); +#234046 = LINE('',#234047,#234048); +#234047 = CARTESIAN_POINT('',(134.403079,-83.479509,1.51)); +#234048 = VECTOR('',#234049,1.); +#234049 = DIRECTION('',(0.,0.,1.)); +#234050 = ORIENTED_EDGE('',*,*,#234051,.F.); +#234051 = EDGE_CURVE('',#234013,#234044,#234052,.T.); +#234052 = LINE('',#234053,#234054); +#234053 = CARTESIAN_POINT('',(134.405,-82.51,1.51)); +#234054 = VECTOR('',#234055,1.); +#234055 = DIRECTION('',(-1.981411445476E-03,-0.999998037002,0.)); +#234056 = PLANE('',#234057); +#234057 = AXIS2_PLACEMENT_3D('',#234058,#234059,#234060); +#234058 = CARTESIAN_POINT('',(134.405,-82.51,1.51)); +#234059 = DIRECTION('',(0.999998037002,-1.981411445476E-03,0.)); +#234060 = DIRECTION('',(-1.981411445476E-03,-0.999998037002,0.)); +#234061 = ADVANCED_FACE('',(#234062),#234089,.T.); +#234062 = FACE_BOUND('',#234063,.T.); +#234063 = EDGE_LOOP('',(#234064,#234065,#234074,#234082)); +#234064 = ORIENTED_EDGE('',*,*,#234043,.T.); +#234065 = ORIENTED_EDGE('',*,*,#234066,.T.); +#234066 = EDGE_CURVE('',#234036,#234067,#234069,.T.); +#234067 = VERTEX_POINT('',#234068); +#234068 = CARTESIAN_POINT('',(134.324509,-83.558079,1.545)); +#234069 = CIRCLE('',#234070,0.100002891901); +#234070 = AXIS2_PLACEMENT_3D('',#234071,#234072,#234073); +#234071 = CARTESIAN_POINT('',(134.30499792896,-83.45999792896,1.545)); +#234072 = DIRECTION('',(0.,0.,-1.)); +#234073 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#234074 = ORIENTED_EDGE('',*,*,#234075,.F.); +#234075 = EDGE_CURVE('',#234076,#234067,#234078,.T.); +#234076 = VERTEX_POINT('',#234077); +#234077 = CARTESIAN_POINT('',(134.324509,-83.558079,1.51)); +#234078 = LINE('',#234079,#234080); +#234079 = CARTESIAN_POINT('',(134.324509,-83.558079,1.51)); +#234080 = VECTOR('',#234081,1.); +#234081 = DIRECTION('',(0.,0.,1.)); +#234082 = ORIENTED_EDGE('',*,*,#234083,.F.); +#234083 = EDGE_CURVE('',#234044,#234076,#234084,.T.); +#234084 = CIRCLE('',#234085,0.100002891901); +#234085 = AXIS2_PLACEMENT_3D('',#234086,#234087,#234088); +#234086 = CARTESIAN_POINT('',(134.30499792896,-83.45999792896,1.51)); +#234087 = DIRECTION('',(0.,0.,-1.)); +#234088 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#234089 = CYLINDRICAL_SURFACE('',#234090,0.100002891901); +#234090 = AXIS2_PLACEMENT_3D('',#234091,#234092,#234093); +#234091 = CARTESIAN_POINT('',(134.30499792896,-83.45999792896,1.51)); +#234092 = DIRECTION('',(0.,0.,-1.)); +#234093 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#234094 = ADVANCED_FACE('',(#234095),#234120,.T.); +#234095 = FACE_BOUND('',#234096,.T.); +#234096 = EDGE_LOOP('',(#234097,#234098,#234106,#234114)); +#234097 = ORIENTED_EDGE('',*,*,#234075,.T.); +#234098 = ORIENTED_EDGE('',*,*,#234099,.T.); +#234099 = EDGE_CURVE('',#234067,#234100,#234102,.T.); +#234100 = VERTEX_POINT('',#234101); +#234101 = CARTESIAN_POINT('',(133.881422,-83.56,1.545)); +#234102 = LINE('',#234103,#234104); +#234103 = CARTESIAN_POINT('',(134.324509,-83.558079,1.545)); +#234104 = VECTOR('',#234105,1.); +#234105 = DIRECTION('',(-0.999990601888,-4.335450930006E-03,0.)); +#234106 = ORIENTED_EDGE('',*,*,#234107,.F.); +#234107 = EDGE_CURVE('',#234108,#234100,#234110,.T.); +#234108 = VERTEX_POINT('',#234109); +#234109 = CARTESIAN_POINT('',(133.881422,-83.56,1.51)); +#234110 = LINE('',#234111,#234112); +#234111 = CARTESIAN_POINT('',(133.881422,-83.56,1.51)); +#234112 = VECTOR('',#234113,1.); +#234113 = DIRECTION('',(0.,0.,1.)); +#234114 = ORIENTED_EDGE('',*,*,#234115,.F.); +#234115 = EDGE_CURVE('',#234076,#234108,#234116,.T.); +#234116 = LINE('',#234117,#234118); +#234117 = CARTESIAN_POINT('',(134.324509,-83.558079,1.51)); +#234118 = VECTOR('',#234119,1.); +#234119 = DIRECTION('',(-0.999990601888,-4.335450930006E-03,0.)); +#234120 = PLANE('',#234121); +#234121 = AXIS2_PLACEMENT_3D('',#234122,#234123,#234124); +#234122 = CARTESIAN_POINT('',(134.324509,-83.558079,1.51)); +#234123 = DIRECTION('',(4.335450930006E-03,-0.999990601888,0.)); +#234124 = DIRECTION('',(-0.999990601888,-4.335450930006E-03,0.)); +#234125 = ADVANCED_FACE('',(#234126),#234151,.T.); +#234126 = FACE_BOUND('',#234127,.T.); +#234127 = EDGE_LOOP('',(#234128,#234129,#234137,#234145)); +#234128 = ORIENTED_EDGE('',*,*,#234107,.T.); +#234129 = ORIENTED_EDGE('',*,*,#234130,.T.); +#234130 = EDGE_CURVE('',#234100,#234131,#234133,.T.); +#234131 = VERTEX_POINT('',#234132); +#234132 = CARTESIAN_POINT('',(131.005557,-86.433147,1.545)); +#234133 = LINE('',#234134,#234135); +#234134 = CARTESIAN_POINT('',(133.881422,-83.56,1.545)); +#234135 = VECTOR('',#234136,1.); +#234136 = DIRECTION('',(-0.707441005867,-0.706772398455,0.)); +#234137 = ORIENTED_EDGE('',*,*,#234138,.F.); +#234138 = EDGE_CURVE('',#234139,#234131,#234141,.T.); +#234139 = VERTEX_POINT('',#234140); +#234140 = CARTESIAN_POINT('',(131.005557,-86.433147,1.51)); +#234141 = LINE('',#234142,#234143); +#234142 = CARTESIAN_POINT('',(131.005557,-86.433147,1.51)); +#234143 = VECTOR('',#234144,1.); +#234144 = DIRECTION('',(0.,0.,1.)); +#234145 = ORIENTED_EDGE('',*,*,#234146,.F.); +#234146 = EDGE_CURVE('',#234108,#234139,#234147,.T.); +#234147 = LINE('',#234148,#234149); +#234148 = CARTESIAN_POINT('',(133.881422,-83.56,1.51)); +#234149 = VECTOR('',#234150,1.); +#234150 = DIRECTION('',(-0.707441005867,-0.706772398455,0.)); +#234151 = PLANE('',#234152); +#234152 = AXIS2_PLACEMENT_3D('',#234153,#234154,#234155); +#234153 = CARTESIAN_POINT('',(133.881422,-83.56,1.51)); +#234154 = DIRECTION('',(0.706772398455,-0.707441005867,0.)); +#234155 = DIRECTION('',(-0.707441005867,-0.706772398455,0.)); +#234156 = ADVANCED_FACE('',(#234157),#234182,.T.); +#234157 = FACE_BOUND('',#234158,.T.); +#234158 = EDGE_LOOP('',(#234159,#234160,#234168,#234176)); +#234159 = ORIENTED_EDGE('',*,*,#234138,.T.); +#234160 = ORIENTED_EDGE('',*,*,#234161,.T.); +#234161 = EDGE_CURVE('',#234131,#234162,#234164,.T.); +#234162 = VERTEX_POINT('',#234163); +#234163 = CARTESIAN_POINT('',(130.969509,-86.448079,1.545)); +#234164 = LINE('',#234165,#234166); +#234165 = CARTESIAN_POINT('',(131.005557,-86.433147,1.545)); +#234166 = VECTOR('',#234167,1.); +#234167 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#234168 = ORIENTED_EDGE('',*,*,#234169,.F.); +#234169 = EDGE_CURVE('',#234170,#234162,#234172,.T.); +#234170 = VERTEX_POINT('',#234171); +#234171 = CARTESIAN_POINT('',(130.969509,-86.448079,1.51)); +#234172 = LINE('',#234173,#234174); +#234173 = CARTESIAN_POINT('',(130.969509,-86.448079,1.51)); +#234174 = VECTOR('',#234175,1.); +#234175 = DIRECTION('',(0.,0.,1.)); +#234176 = ORIENTED_EDGE('',*,*,#234177,.F.); +#234177 = EDGE_CURVE('',#234139,#234170,#234178,.T.); +#234178 = LINE('',#234179,#234180); +#234179 = CARTESIAN_POINT('',(131.005557,-86.433147,1.51)); +#234180 = VECTOR('',#234181,1.); +#234181 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#234182 = PLANE('',#234183); +#234183 = AXIS2_PLACEMENT_3D('',#234184,#234185,#234186); +#234184 = CARTESIAN_POINT('',(131.005557,-86.433147,1.51)); +#234185 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#234186 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#234187 = ADVANCED_FACE('',(#234188),#234213,.T.); +#234188 = FACE_BOUND('',#234189,.T.); +#234189 = EDGE_LOOP('',(#234190,#234191,#234199,#234207)); +#234190 = ORIENTED_EDGE('',*,*,#234169,.T.); +#234191 = ORIENTED_EDGE('',*,*,#234192,.T.); +#234192 = EDGE_CURVE('',#234162,#234193,#234195,.T.); +#234193 = VERTEX_POINT('',#234194); +#234194 = CARTESIAN_POINT('',(130.727208,-86.45,1.545)); +#234195 = LINE('',#234196,#234197); +#234196 = CARTESIAN_POINT('',(130.969509,-86.448079,1.545)); +#234197 = VECTOR('',#234198,1.); +#234198 = DIRECTION('',(-0.999968573657,-7.927906323089E-03,0.)); +#234199 = ORIENTED_EDGE('',*,*,#234200,.F.); +#234200 = EDGE_CURVE('',#234201,#234193,#234203,.T.); +#234201 = VERTEX_POINT('',#234202); +#234202 = CARTESIAN_POINT('',(130.727208,-86.45,1.51)); +#234203 = LINE('',#234204,#234205); +#234204 = CARTESIAN_POINT('',(130.727208,-86.45,1.51)); +#234205 = VECTOR('',#234206,1.); +#234206 = DIRECTION('',(0.,0.,1.)); +#234207 = ORIENTED_EDGE('',*,*,#234208,.F.); +#234208 = EDGE_CURVE('',#234170,#234201,#234209,.T.); +#234209 = LINE('',#234210,#234211); +#234210 = CARTESIAN_POINT('',(130.969509,-86.448079,1.51)); +#234211 = VECTOR('',#234212,1.); +#234212 = DIRECTION('',(-0.999968573657,-7.927906323089E-03,0.)); +#234213 = PLANE('',#234214); +#234214 = AXIS2_PLACEMENT_3D('',#234215,#234216,#234217); +#234215 = CARTESIAN_POINT('',(130.969509,-86.448079,1.51)); +#234216 = DIRECTION('',(7.927906323089E-03,-0.999968573657,0.)); +#234217 = DIRECTION('',(-0.999968573657,-7.927906323089E-03,0.)); +#234218 = ADVANCED_FACE('',(#234219),#234244,.T.); +#234219 = FACE_BOUND('',#234220,.T.); +#234220 = EDGE_LOOP('',(#234221,#234222,#234230,#234238)); +#234221 = ORIENTED_EDGE('',*,*,#234200,.T.); +#234222 = ORIENTED_EDGE('',*,*,#234223,.T.); +#234223 = EDGE_CURVE('',#234193,#234224,#234226,.T.); +#234224 = VERTEX_POINT('',#234225); +#234225 = CARTESIAN_POINT('',(130.2,-86.977207,1.545)); +#234226 = LINE('',#234227,#234228); +#234227 = CARTESIAN_POINT('',(130.727208,-86.45,1.545)); +#234228 = VECTOR('',#234229,1.); +#234229 = DIRECTION('',(-0.707107451801,-0.707106110571,0.)); +#234230 = ORIENTED_EDGE('',*,*,#234231,.F.); +#234231 = EDGE_CURVE('',#234232,#234224,#234234,.T.); +#234232 = VERTEX_POINT('',#234233); +#234233 = CARTESIAN_POINT('',(130.2,-86.977207,1.51)); +#234234 = LINE('',#234235,#234236); +#234235 = CARTESIAN_POINT('',(130.2,-86.977207,1.51)); +#234236 = VECTOR('',#234237,1.); +#234237 = DIRECTION('',(0.,0.,1.)); +#234238 = ORIENTED_EDGE('',*,*,#234239,.F.); +#234239 = EDGE_CURVE('',#234201,#234232,#234240,.T.); +#234240 = LINE('',#234241,#234242); +#234241 = CARTESIAN_POINT('',(130.727208,-86.45,1.51)); +#234242 = VECTOR('',#234243,1.); +#234243 = DIRECTION('',(-0.707107451801,-0.707106110571,0.)); +#234244 = PLANE('',#234245); +#234245 = AXIS2_PLACEMENT_3D('',#234246,#234247,#234248); +#234246 = CARTESIAN_POINT('',(130.727208,-86.45,1.51)); +#234247 = DIRECTION('',(0.707106110571,-0.707107451801,0.)); +#234248 = DIRECTION('',(-0.707107451801,-0.707106110571,0.)); +#234249 = ADVANCED_FACE('',(#234250),#234275,.T.); +#234250 = FACE_BOUND('',#234251,.T.); +#234251 = EDGE_LOOP('',(#234252,#234253,#234261,#234269)); +#234252 = ORIENTED_EDGE('',*,*,#234231,.T.); +#234253 = ORIENTED_EDGE('',*,*,#234254,.T.); +#234254 = EDGE_CURVE('',#234224,#234255,#234257,.T.); +#234255 = VERTEX_POINT('',#234256); +#234256 = CARTESIAN_POINT('',(130.198079,-87.219509,1.545)); +#234257 = LINE('',#234258,#234259); +#234258 = CARTESIAN_POINT('',(130.2,-86.977207,1.545)); +#234259 = VECTOR('',#234260,1.); +#234260 = DIRECTION('',(-7.927873605974E-03,-0.999968573916,0.)); +#234261 = ORIENTED_EDGE('',*,*,#234262,.F.); +#234262 = EDGE_CURVE('',#234263,#234255,#234265,.T.); +#234263 = VERTEX_POINT('',#234264); +#234264 = CARTESIAN_POINT('',(130.198079,-87.219509,1.51)); +#234265 = LINE('',#234266,#234267); +#234266 = CARTESIAN_POINT('',(130.198079,-87.219509,1.51)); +#234267 = VECTOR('',#234268,1.); +#234268 = DIRECTION('',(0.,0.,1.)); +#234269 = ORIENTED_EDGE('',*,*,#234270,.F.); +#234270 = EDGE_CURVE('',#234232,#234263,#234271,.T.); +#234271 = LINE('',#234272,#234273); +#234272 = CARTESIAN_POINT('',(130.2,-86.977207,1.51)); +#234273 = VECTOR('',#234274,1.); +#234274 = DIRECTION('',(-7.927873605974E-03,-0.999968573916,0.)); +#234275 = PLANE('',#234276); +#234276 = AXIS2_PLACEMENT_3D('',#234277,#234278,#234279); +#234277 = CARTESIAN_POINT('',(130.2,-86.977207,1.51)); +#234278 = DIRECTION('',(0.999968573916,-7.927873605974E-03,0.)); +#234279 = DIRECTION('',(-7.927873605974E-03,-0.999968573916,0.)); +#234280 = ADVANCED_FACE('',(#234281),#234306,.T.); +#234281 = FACE_BOUND('',#234282,.T.); +#234282 = EDGE_LOOP('',(#234283,#234284,#234292,#234300)); +#234283 = ORIENTED_EDGE('',*,*,#234262,.T.); +#234284 = ORIENTED_EDGE('',*,*,#234285,.T.); +#234285 = EDGE_CURVE('',#234255,#234286,#234288,.T.); +#234286 = VERTEX_POINT('',#234287); +#234287 = CARTESIAN_POINT('',(130.183147,-87.255558,1.545)); +#234288 = LINE('',#234289,#234290); +#234289 = CARTESIAN_POINT('',(130.198079,-87.219509,1.545)); +#234290 = VECTOR('',#234291,1.); +#234291 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#234292 = ORIENTED_EDGE('',*,*,#234293,.F.); +#234293 = EDGE_CURVE('',#234294,#234286,#234296,.T.); +#234294 = VERTEX_POINT('',#234295); +#234295 = CARTESIAN_POINT('',(130.183147,-87.255558,1.51)); +#234296 = LINE('',#234297,#234298); +#234297 = CARTESIAN_POINT('',(130.183147,-87.255558,1.51)); +#234298 = VECTOR('',#234299,1.); +#234299 = DIRECTION('',(0.,0.,1.)); +#234300 = ORIENTED_EDGE('',*,*,#234301,.F.); +#234301 = EDGE_CURVE('',#234263,#234294,#234302,.T.); +#234302 = LINE('',#234303,#234304); +#234303 = CARTESIAN_POINT('',(130.198079,-87.219509,1.51)); +#234304 = VECTOR('',#234305,1.); +#234305 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#234306 = PLANE('',#234307); +#234307 = AXIS2_PLACEMENT_3D('',#234308,#234309,#234310); +#234308 = CARTESIAN_POINT('',(130.198079,-87.219509,1.51)); +#234309 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#234310 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#234311 = ADVANCED_FACE('',(#234312),#234337,.T.); +#234312 = FACE_BOUND('',#234313,.T.); +#234313 = EDGE_LOOP('',(#234314,#234315,#234323,#234331)); +#234314 = ORIENTED_EDGE('',*,*,#234293,.T.); +#234315 = ORIENTED_EDGE('',*,*,#234316,.T.); +#234316 = EDGE_CURVE('',#234286,#234317,#234319,.T.); +#234317 = VERTEX_POINT('',#234318); +#234318 = CARTESIAN_POINT('',(129.3,-88.141422,1.545)); +#234319 = LINE('',#234320,#234321); +#234320 = CARTESIAN_POINT('',(130.183147,-87.255558,1.545)); +#234321 = VECTOR('',#234322,1.); +#234322 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#234323 = ORIENTED_EDGE('',*,*,#234324,.F.); +#234324 = EDGE_CURVE('',#234325,#234317,#234327,.T.); +#234325 = VERTEX_POINT('',#234326); +#234326 = CARTESIAN_POINT('',(129.3,-88.141422,1.51)); +#234327 = LINE('',#234328,#234329); +#234328 = CARTESIAN_POINT('',(129.3,-88.141422,1.51)); +#234329 = VECTOR('',#234330,1.); +#234330 = DIRECTION('',(0.,0.,1.)); +#234331 = ORIENTED_EDGE('',*,*,#234332,.F.); +#234332 = EDGE_CURVE('',#234294,#234325,#234333,.T.); +#234333 = LINE('',#234334,#234335); +#234334 = CARTESIAN_POINT('',(130.183147,-87.255558,1.51)); +#234335 = VECTOR('',#234336,1.); +#234336 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#234337 = PLANE('',#234338); +#234338 = AXIS2_PLACEMENT_3D('',#234339,#234340,#234341); +#234339 = CARTESIAN_POINT('',(130.183147,-87.255558,1.51)); +#234340 = DIRECTION('',(0.708191981607,-0.706019912741,0.)); +#234341 = DIRECTION('',(-0.706019912741,-0.708191981607,0.)); +#234342 = ADVANCED_FACE('',(#234343),#234368,.T.); +#234343 = FACE_BOUND('',#234344,.T.); +#234344 = EDGE_LOOP('',(#234345,#234346,#234354,#234362)); +#234345 = ORIENTED_EDGE('',*,*,#234324,.T.); +#234346 = ORIENTED_EDGE('',*,*,#234347,.T.); +#234347 = EDGE_CURVE('',#234317,#234348,#234350,.T.); +#234348 = VERTEX_POINT('',#234349); +#234349 = CARTESIAN_POINT('',(129.298079,-100.019509,1.545)); +#234350 = LINE('',#234351,#234352); +#234351 = CARTESIAN_POINT('',(129.3,-88.141422,1.545)); +#234352 = VECTOR('',#234353,1.); +#234353 = DIRECTION('',(-1.617263768895E-04,-0.999999986922,0.)); +#234354 = ORIENTED_EDGE('',*,*,#234355,.F.); +#234355 = EDGE_CURVE('',#234356,#234348,#234358,.T.); +#234356 = VERTEX_POINT('',#234357); +#234357 = CARTESIAN_POINT('',(129.298079,-100.019509,1.51)); +#234358 = LINE('',#234359,#234360); +#234359 = CARTESIAN_POINT('',(129.298079,-100.019509,1.51)); +#234360 = VECTOR('',#234361,1.); +#234361 = DIRECTION('',(0.,0.,1.)); +#234362 = ORIENTED_EDGE('',*,*,#234363,.F.); +#234363 = EDGE_CURVE('',#234325,#234356,#234364,.T.); +#234364 = LINE('',#234365,#234366); +#234365 = CARTESIAN_POINT('',(129.3,-88.141422,1.51)); +#234366 = VECTOR('',#234367,1.); +#234367 = DIRECTION('',(-1.617263768895E-04,-0.999999986922,0.)); +#234368 = PLANE('',#234369); +#234369 = AXIS2_PLACEMENT_3D('',#234370,#234371,#234372); +#234370 = CARTESIAN_POINT('',(129.3,-88.141422,1.51)); +#234371 = DIRECTION('',(0.999999986922,-1.617263768895E-04,0.)); +#234372 = DIRECTION('',(-1.617263768895E-04,-0.999999986922,0.)); +#234373 = ADVANCED_FACE('',(#234374),#234399,.T.); +#234374 = FACE_BOUND('',#234375,.T.); +#234375 = EDGE_LOOP('',(#234376,#234377,#234385,#234393)); +#234376 = ORIENTED_EDGE('',*,*,#234355,.T.); +#234377 = ORIENTED_EDGE('',*,*,#234378,.T.); +#234378 = EDGE_CURVE('',#234348,#234379,#234381,.T.); +#234379 = VERTEX_POINT('',#234380); +#234380 = CARTESIAN_POINT('',(129.283147,-100.055557,1.545)); +#234381 = LINE('',#234382,#234383); +#234382 = CARTESIAN_POINT('',(129.298079,-100.019509,1.545)); +#234383 = VECTOR('',#234384,1.); +#234384 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234385 = ORIENTED_EDGE('',*,*,#234386,.F.); +#234386 = EDGE_CURVE('',#234387,#234379,#234389,.T.); +#234387 = VERTEX_POINT('',#234388); +#234388 = CARTESIAN_POINT('',(129.283147,-100.055557,1.51)); +#234389 = LINE('',#234390,#234391); +#234390 = CARTESIAN_POINT('',(129.283147,-100.055557,1.51)); +#234391 = VECTOR('',#234392,1.); +#234392 = DIRECTION('',(0.,0.,1.)); +#234393 = ORIENTED_EDGE('',*,*,#234394,.F.); +#234394 = EDGE_CURVE('',#234356,#234387,#234395,.T.); +#234395 = LINE('',#234396,#234397); +#234396 = CARTESIAN_POINT('',(129.298079,-100.019509,1.51)); +#234397 = VECTOR('',#234398,1.); +#234398 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234399 = PLANE('',#234400); +#234400 = AXIS2_PLACEMENT_3D('',#234401,#234402,#234403); +#234401 = CARTESIAN_POINT('',(129.298079,-100.019509,1.51)); +#234402 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#234403 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234404 = ADVANCED_FACE('',(#234405),#234430,.T.); +#234405 = FACE_BOUND('',#234406,.T.); +#234406 = EDGE_LOOP('',(#234407,#234408,#234416,#234424)); +#234407 = ORIENTED_EDGE('',*,*,#234386,.T.); +#234408 = ORIENTED_EDGE('',*,*,#234409,.T.); +#234409 = EDGE_CURVE('',#234379,#234410,#234412,.T.); +#234410 = VERTEX_POINT('',#234411); +#234411 = CARTESIAN_POINT('',(126.2,-103.141422,1.545)); +#234412 = LINE('',#234413,#234414); +#234413 = CARTESIAN_POINT('',(129.283147,-100.055557,1.545)); +#234414 = VECTOR('',#234415,1.); +#234415 = DIRECTION('',(-0.706795168981,-0.707418256129,0.)); +#234416 = ORIENTED_EDGE('',*,*,#234417,.F.); +#234417 = EDGE_CURVE('',#234418,#234410,#234420,.T.); +#234418 = VERTEX_POINT('',#234419); +#234419 = CARTESIAN_POINT('',(126.2,-103.141422,1.51)); +#234420 = LINE('',#234421,#234422); +#234421 = CARTESIAN_POINT('',(126.2,-103.141422,1.51)); +#234422 = VECTOR('',#234423,1.); +#234423 = DIRECTION('',(0.,0.,1.)); +#234424 = ORIENTED_EDGE('',*,*,#234425,.F.); +#234425 = EDGE_CURVE('',#234387,#234418,#234426,.T.); +#234426 = LINE('',#234427,#234428); +#234427 = CARTESIAN_POINT('',(129.283147,-100.055557,1.51)); +#234428 = VECTOR('',#234429,1.); +#234429 = DIRECTION('',(-0.706795168981,-0.707418256129,0.)); +#234430 = PLANE('',#234431); +#234431 = AXIS2_PLACEMENT_3D('',#234432,#234433,#234434); +#234432 = CARTESIAN_POINT('',(129.283147,-100.055557,1.51)); +#234433 = DIRECTION('',(0.707418256129,-0.706795168981,0.)); +#234434 = DIRECTION('',(-0.706795168981,-0.707418256129,0.)); +#234435 = ADVANCED_FACE('',(#234436),#234461,.T.); +#234436 = FACE_BOUND('',#234437,.T.); +#234437 = EDGE_LOOP('',(#234438,#234439,#234447,#234455)); +#234438 = ORIENTED_EDGE('',*,*,#234417,.T.); +#234439 = ORIENTED_EDGE('',*,*,#234440,.T.); +#234440 = EDGE_CURVE('',#234410,#234441,#234443,.T.); +#234441 = VERTEX_POINT('',#234442); +#234442 = CARTESIAN_POINT('',(126.198079,-114.319509,1.545)); +#234443 = LINE('',#234444,#234445); +#234444 = CARTESIAN_POINT('',(126.2,-103.141422,1.545)); +#234445 = VECTOR('',#234446,1.); +#234446 = DIRECTION('',(-1.71854090206E-04,-0.999999985233,0.)); +#234447 = ORIENTED_EDGE('',*,*,#234448,.F.); +#234448 = EDGE_CURVE('',#234449,#234441,#234451,.T.); +#234449 = VERTEX_POINT('',#234450); +#234450 = CARTESIAN_POINT('',(126.198079,-114.319509,1.51)); +#234451 = LINE('',#234452,#234453); +#234452 = CARTESIAN_POINT('',(126.198079,-114.319509,1.51)); +#234453 = VECTOR('',#234454,1.); +#234454 = DIRECTION('',(0.,0.,1.)); +#234455 = ORIENTED_EDGE('',*,*,#234456,.F.); +#234456 = EDGE_CURVE('',#234418,#234449,#234457,.T.); +#234457 = LINE('',#234458,#234459); +#234458 = CARTESIAN_POINT('',(126.2,-103.141422,1.51)); +#234459 = VECTOR('',#234460,1.); +#234460 = DIRECTION('',(-1.71854090206E-04,-0.999999985233,0.)); +#234461 = PLANE('',#234462); +#234462 = AXIS2_PLACEMENT_3D('',#234463,#234464,#234465); +#234463 = CARTESIAN_POINT('',(126.2,-103.141422,1.51)); +#234464 = DIRECTION('',(0.999999985233,-1.71854090206E-04,0.)); +#234465 = DIRECTION('',(-1.71854090206E-04,-0.999999985233,0.)); +#234466 = ADVANCED_FACE('',(#234467),#234492,.T.); +#234467 = FACE_BOUND('',#234468,.T.); +#234468 = EDGE_LOOP('',(#234469,#234470,#234478,#234486)); +#234469 = ORIENTED_EDGE('',*,*,#234448,.T.); +#234470 = ORIENTED_EDGE('',*,*,#234471,.T.); +#234471 = EDGE_CURVE('',#234441,#234472,#234474,.T.); +#234472 = VERTEX_POINT('',#234473); +#234473 = CARTESIAN_POINT('',(126.183147,-114.355557,1.545)); +#234474 = LINE('',#234475,#234476); +#234475 = CARTESIAN_POINT('',(126.198079,-114.319509,1.545)); +#234476 = VECTOR('',#234477,1.); +#234477 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234478 = ORIENTED_EDGE('',*,*,#234479,.F.); +#234479 = EDGE_CURVE('',#234480,#234472,#234482,.T.); +#234480 = VERTEX_POINT('',#234481); +#234481 = CARTESIAN_POINT('',(126.183147,-114.355557,1.51)); +#234482 = LINE('',#234483,#234484); +#234483 = CARTESIAN_POINT('',(126.183147,-114.355557,1.51)); +#234484 = VECTOR('',#234485,1.); +#234485 = DIRECTION('',(0.,0.,1.)); +#234486 = ORIENTED_EDGE('',*,*,#234487,.F.); +#234487 = EDGE_CURVE('',#234449,#234480,#234488,.T.); +#234488 = LINE('',#234489,#234490); +#234489 = CARTESIAN_POINT('',(126.198079,-114.319509,1.51)); +#234490 = VECTOR('',#234491,1.); +#234491 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234492 = PLANE('',#234493); +#234493 = AXIS2_PLACEMENT_3D('',#234494,#234495,#234496); +#234494 = CARTESIAN_POINT('',(126.198079,-114.319509,1.51)); +#234495 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#234496 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234497 = ADVANCED_FACE('',(#234498),#234523,.T.); +#234498 = FACE_BOUND('',#234499,.T.); +#234499 = EDGE_LOOP('',(#234500,#234501,#234509,#234517)); +#234500 = ORIENTED_EDGE('',*,*,#234479,.T.); +#234501 = ORIENTED_EDGE('',*,*,#234502,.T.); +#234502 = EDGE_CURVE('',#234472,#234503,#234505,.T.); +#234503 = VERTEX_POINT('',#234504); +#234504 = CARTESIAN_POINT('',(121.7,-118.841422,1.545)); +#234505 = LINE('',#234506,#234507); +#234506 = CARTESIAN_POINT('',(126.183147,-114.355557,1.545)); +#234507 = VECTOR('',#234508,1.); +#234508 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#234509 = ORIENTED_EDGE('',*,*,#234510,.F.); +#234510 = EDGE_CURVE('',#234511,#234503,#234513,.T.); +#234511 = VERTEX_POINT('',#234512); +#234512 = CARTESIAN_POINT('',(121.7,-118.841422,1.51)); +#234513 = LINE('',#234514,#234515); +#234514 = CARTESIAN_POINT('',(121.7,-118.841422,1.51)); +#234515 = VECTOR('',#234516,1.); +#234516 = DIRECTION('',(0.,0.,1.)); +#234517 = ORIENTED_EDGE('',*,*,#234518,.F.); +#234518 = EDGE_CURVE('',#234480,#234511,#234519,.T.); +#234519 = LINE('',#234520,#234521); +#234520 = CARTESIAN_POINT('',(126.183147,-114.355557,1.51)); +#234521 = VECTOR('',#234522,1.); +#234522 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#234523 = PLANE('',#234524); +#234524 = AXIS2_PLACEMENT_3D('',#234525,#234526,#234527); +#234525 = CARTESIAN_POINT('',(126.183147,-114.355557,1.51)); +#234526 = DIRECTION('',(0.70732103276,-0.706892464676,0.)); +#234527 = DIRECTION('',(-0.706892464676,-0.70732103276,0.)); +#234528 = ADVANCED_FACE('',(#234529),#234554,.T.); +#234529 = FACE_BOUND('',#234530,.T.); +#234530 = EDGE_LOOP('',(#234531,#234532,#234540,#234548)); +#234531 = ORIENTED_EDGE('',*,*,#234510,.T.); +#234532 = ORIENTED_EDGE('',*,*,#234533,.T.); +#234533 = EDGE_CURVE('',#234503,#234534,#234536,.T.); +#234534 = VERTEX_POINT('',#234535); +#234535 = CARTESIAN_POINT('',(121.7,-134.258578,1.545)); +#234536 = LINE('',#234537,#234538); +#234537 = CARTESIAN_POINT('',(121.7,-118.841422,1.545)); +#234538 = VECTOR('',#234539,1.); +#234539 = DIRECTION('',(0.,-1.,0.)); +#234540 = ORIENTED_EDGE('',*,*,#234541,.F.); +#234541 = EDGE_CURVE('',#234542,#234534,#234544,.T.); +#234542 = VERTEX_POINT('',#234543); +#234543 = CARTESIAN_POINT('',(121.7,-134.258578,1.51)); +#234544 = LINE('',#234545,#234546); +#234545 = CARTESIAN_POINT('',(121.7,-134.258578,1.51)); +#234546 = VECTOR('',#234547,1.); +#234547 = DIRECTION('',(0.,0.,1.)); +#234548 = ORIENTED_EDGE('',*,*,#234549,.F.); +#234549 = EDGE_CURVE('',#234511,#234542,#234550,.T.); +#234550 = LINE('',#234551,#234552); +#234551 = CARTESIAN_POINT('',(121.7,-118.841422,1.51)); +#234552 = VECTOR('',#234553,1.); +#234553 = DIRECTION('',(0.,-1.,0.)); +#234554 = PLANE('',#234555); +#234555 = AXIS2_PLACEMENT_3D('',#234556,#234557,#234558); +#234556 = CARTESIAN_POINT('',(121.7,-118.841422,1.51)); +#234557 = DIRECTION('',(1.,0.,-0.)); +#234558 = DIRECTION('',(0.,-1.,0.)); +#234559 = ADVANCED_FACE('',(#234560),#234585,.T.); +#234560 = FACE_BOUND('',#234561,.T.); +#234561 = EDGE_LOOP('',(#234562,#234563,#234571,#234579)); +#234562 = ORIENTED_EDGE('',*,*,#234541,.T.); +#234563 = ORIENTED_EDGE('',*,*,#234564,.T.); +#234564 = EDGE_CURVE('',#234534,#234565,#234567,.T.); +#234565 = VERTEX_POINT('',#234566); +#234566 = CARTESIAN_POINT('',(123.841422,-136.4,1.545)); +#234567 = LINE('',#234568,#234569); +#234568 = CARTESIAN_POINT('',(121.7,-134.258578,1.545)); +#234569 = VECTOR('',#234570,1.); +#234570 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234571 = ORIENTED_EDGE('',*,*,#234572,.F.); +#234572 = EDGE_CURVE('',#234573,#234565,#234575,.T.); +#234573 = VERTEX_POINT('',#234574); +#234574 = CARTESIAN_POINT('',(123.841422,-136.4,1.51)); +#234575 = LINE('',#234576,#234577); +#234576 = CARTESIAN_POINT('',(123.841422,-136.4,1.51)); +#234577 = VECTOR('',#234578,1.); +#234578 = DIRECTION('',(0.,0.,1.)); +#234579 = ORIENTED_EDGE('',*,*,#234580,.F.); +#234580 = EDGE_CURVE('',#234542,#234573,#234581,.T.); +#234581 = LINE('',#234582,#234583); +#234582 = CARTESIAN_POINT('',(121.7,-134.258578,1.51)); +#234583 = VECTOR('',#234584,1.); +#234584 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234585 = PLANE('',#234586); +#234586 = AXIS2_PLACEMENT_3D('',#234587,#234588,#234589); +#234587 = CARTESIAN_POINT('',(121.7,-134.258578,1.51)); +#234588 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#234589 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234590 = ADVANCED_FACE('',(#234591),#234616,.T.); +#234591 = FACE_BOUND('',#234592,.T.); +#234592 = EDGE_LOOP('',(#234593,#234594,#234602,#234610)); +#234593 = ORIENTED_EDGE('',*,*,#234572,.T.); +#234594 = ORIENTED_EDGE('',*,*,#234595,.T.); +#234595 = EDGE_CURVE('',#234565,#234596,#234598,.T.); +#234596 = VERTEX_POINT('',#234597); +#234597 = CARTESIAN_POINT('',(129.889957,-136.401921,1.545)); +#234598 = LINE('',#234599,#234600); +#234599 = CARTESIAN_POINT('',(123.841422,-136.4,1.545)); +#234600 = VECTOR('',#234601,1.); +#234601 = DIRECTION('',(0.999999949566,-3.175975509934E-04,0.)); +#234602 = ORIENTED_EDGE('',*,*,#234603,.F.); +#234603 = EDGE_CURVE('',#234604,#234596,#234606,.T.); +#234604 = VERTEX_POINT('',#234605); +#234605 = CARTESIAN_POINT('',(129.889957,-136.401921,1.51)); +#234606 = LINE('',#234607,#234608); +#234607 = CARTESIAN_POINT('',(129.889957,-136.401921,1.51)); +#234608 = VECTOR('',#234609,1.); +#234609 = DIRECTION('',(0.,0.,1.)); +#234610 = ORIENTED_EDGE('',*,*,#234611,.F.); +#234611 = EDGE_CURVE('',#234573,#234604,#234612,.T.); +#234612 = LINE('',#234613,#234614); +#234613 = CARTESIAN_POINT('',(123.841422,-136.4,1.51)); +#234614 = VECTOR('',#234615,1.); +#234615 = DIRECTION('',(0.999999949566,-3.175975509934E-04,0.)); +#234616 = PLANE('',#234617); +#234617 = AXIS2_PLACEMENT_3D('',#234618,#234619,#234620); +#234618 = CARTESIAN_POINT('',(123.841422,-136.4,1.51)); +#234619 = DIRECTION('',(3.175975509934E-04,0.999999949566,-0.)); +#234620 = DIRECTION('',(0.999999949566,-3.175975509934E-04,0.)); +#234621 = ADVANCED_FACE('',(#234622),#234647,.T.); +#234622 = FACE_BOUND('',#234623,.T.); +#234623 = EDGE_LOOP('',(#234624,#234625,#234633,#234641)); +#234624 = ORIENTED_EDGE('',*,*,#234603,.T.); +#234625 = ORIENTED_EDGE('',*,*,#234626,.T.); +#234626 = EDGE_CURVE('',#234596,#234627,#234629,.T.); +#234627 = VERTEX_POINT('',#234628); +#234628 = CARTESIAN_POINT('',(129.926005,-136.416853,1.545)); +#234629 = LINE('',#234630,#234631); +#234630 = CARTESIAN_POINT('',(129.889957,-136.401921,1.545)); +#234631 = VECTOR('',#234632,1.); +#234632 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#234633 = ORIENTED_EDGE('',*,*,#234634,.F.); +#234634 = EDGE_CURVE('',#234635,#234627,#234637,.T.); +#234635 = VERTEX_POINT('',#234636); +#234636 = CARTESIAN_POINT('',(129.926005,-136.416853,1.51)); +#234637 = LINE('',#234638,#234639); +#234638 = CARTESIAN_POINT('',(129.926005,-136.416853,1.51)); +#234639 = VECTOR('',#234640,1.); +#234640 = DIRECTION('',(0.,0.,1.)); +#234641 = ORIENTED_EDGE('',*,*,#234642,.F.); +#234642 = EDGE_CURVE('',#234604,#234635,#234643,.T.); +#234643 = LINE('',#234644,#234645); +#234644 = CARTESIAN_POINT('',(129.889957,-136.401921,1.51)); +#234645 = VECTOR('',#234646,1.); +#234646 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#234647 = PLANE('',#234648); +#234648 = AXIS2_PLACEMENT_3D('',#234649,#234650,#234651); +#234649 = CARTESIAN_POINT('',(129.889957,-136.401921,1.51)); +#234650 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#234651 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#234652 = ADVANCED_FACE('',(#234653),#234678,.T.); +#234653 = FACE_BOUND('',#234654,.T.); +#234654 = EDGE_LOOP('',(#234655,#234656,#234664,#234672)); +#234655 = ORIENTED_EDGE('',*,*,#234634,.T.); +#234656 = ORIENTED_EDGE('',*,*,#234657,.T.); +#234657 = EDGE_CURVE('',#234627,#234658,#234660,.T.); +#234658 = VERTEX_POINT('',#234659); +#234659 = CARTESIAN_POINT('',(135.383147,-141.873995,1.545)); +#234660 = LINE('',#234661,#234662); +#234661 = CARTESIAN_POINT('',(129.926005,-136.416853,1.545)); +#234662 = VECTOR('',#234663,1.); +#234663 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234664 = ORIENTED_EDGE('',*,*,#234665,.F.); +#234665 = EDGE_CURVE('',#234666,#234658,#234668,.T.); +#234666 = VERTEX_POINT('',#234667); +#234667 = CARTESIAN_POINT('',(135.383147,-141.873995,1.51)); +#234668 = LINE('',#234669,#234670); +#234669 = CARTESIAN_POINT('',(135.383147,-141.873995,1.51)); +#234670 = VECTOR('',#234671,1.); +#234671 = DIRECTION('',(0.,0.,1.)); +#234672 = ORIENTED_EDGE('',*,*,#234673,.F.); +#234673 = EDGE_CURVE('',#234635,#234666,#234674,.T.); +#234674 = LINE('',#234675,#234676); +#234675 = CARTESIAN_POINT('',(129.926005,-136.416853,1.51)); +#234676 = VECTOR('',#234677,1.); +#234677 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234678 = PLANE('',#234679); +#234679 = AXIS2_PLACEMENT_3D('',#234680,#234681,#234682); +#234680 = CARTESIAN_POINT('',(129.926005,-136.416853,1.51)); +#234681 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#234682 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#234683 = ADVANCED_FACE('',(#234684),#234709,.T.); +#234684 = FACE_BOUND('',#234685,.T.); +#234685 = EDGE_LOOP('',(#234686,#234687,#234695,#234703)); +#234686 = ORIENTED_EDGE('',*,*,#234665,.T.); +#234687 = ORIENTED_EDGE('',*,*,#234688,.T.); +#234688 = EDGE_CURVE('',#234658,#234689,#234691,.T.); +#234689 = VERTEX_POINT('',#234690); +#234690 = CARTESIAN_POINT('',(135.398079,-141.910043,1.545)); +#234691 = LINE('',#234692,#234693); +#234692 = CARTESIAN_POINT('',(135.383147,-141.873995,1.545)); +#234693 = VECTOR('',#234694,1.); +#234694 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#234695 = ORIENTED_EDGE('',*,*,#234696,.F.); +#234696 = EDGE_CURVE('',#234697,#234689,#234699,.T.); +#234697 = VERTEX_POINT('',#234698); +#234698 = CARTESIAN_POINT('',(135.398079,-141.910043,1.51)); +#234699 = LINE('',#234700,#234701); +#234700 = CARTESIAN_POINT('',(135.398079,-141.910043,1.51)); +#234701 = VECTOR('',#234702,1.); +#234702 = DIRECTION('',(0.,0.,1.)); +#234703 = ORIENTED_EDGE('',*,*,#234704,.F.); +#234704 = EDGE_CURVE('',#234666,#234697,#234705,.T.); +#234705 = LINE('',#234706,#234707); +#234706 = CARTESIAN_POINT('',(135.383147,-141.873995,1.51)); +#234707 = VECTOR('',#234708,1.); +#234708 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#234709 = PLANE('',#234710); +#234710 = AXIS2_PLACEMENT_3D('',#234711,#234712,#234713); +#234711 = CARTESIAN_POINT('',(135.383147,-141.873995,1.51)); +#234712 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#234713 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#234714 = ADVANCED_FACE('',(#234715),#234740,.T.); +#234715 = FACE_BOUND('',#234716,.T.); +#234716 = EDGE_LOOP('',(#234717,#234718,#234726,#234734)); +#234717 = ORIENTED_EDGE('',*,*,#234696,.T.); +#234718 = ORIENTED_EDGE('',*,*,#234719,.T.); +#234719 = EDGE_CURVE('',#234689,#234720,#234722,.T.); +#234720 = VERTEX_POINT('',#234721); +#234721 = CARTESIAN_POINT('',(135.4,-146.758578,1.545)); +#234722 = LINE('',#234723,#234724); +#234723 = CARTESIAN_POINT('',(135.398079,-141.910043,1.545)); +#234724 = VECTOR('',#234725,1.); +#234725 = DIRECTION('',(3.962021206889E-04,-0.999999921512,0.)); +#234726 = ORIENTED_EDGE('',*,*,#234727,.F.); +#234727 = EDGE_CURVE('',#234728,#234720,#234730,.T.); +#234728 = VERTEX_POINT('',#234729); +#234729 = CARTESIAN_POINT('',(135.4,-146.758578,1.51)); +#234730 = LINE('',#234731,#234732); +#234731 = CARTESIAN_POINT('',(135.4,-146.758578,1.51)); +#234732 = VECTOR('',#234733,1.); +#234733 = DIRECTION('',(0.,0.,1.)); +#234734 = ORIENTED_EDGE('',*,*,#234735,.F.); +#234735 = EDGE_CURVE('',#234697,#234728,#234736,.T.); +#234736 = LINE('',#234737,#234738); +#234737 = CARTESIAN_POINT('',(135.398079,-141.910043,1.51)); +#234738 = VECTOR('',#234739,1.); +#234739 = DIRECTION('',(3.962021206889E-04,-0.999999921512,0.)); +#234740 = PLANE('',#234741); +#234741 = AXIS2_PLACEMENT_3D('',#234742,#234743,#234744); +#234742 = CARTESIAN_POINT('',(135.398079,-141.910043,1.51)); +#234743 = DIRECTION('',(0.999999921512,3.962021206889E-04,-0.)); +#234744 = DIRECTION('',(3.962021206889E-04,-0.999999921512,0.)); +#234745 = ADVANCED_FACE('',(#234746),#234771,.T.); +#234746 = FACE_BOUND('',#234747,.T.); +#234747 = EDGE_LOOP('',(#234748,#234749,#234757,#234765)); +#234748 = ORIENTED_EDGE('',*,*,#234727,.T.); +#234749 = ORIENTED_EDGE('',*,*,#234750,.T.); +#234750 = EDGE_CURVE('',#234720,#234751,#234753,.T.); +#234751 = VERTEX_POINT('',#234752); +#234752 = CARTESIAN_POINT('',(137.763428,-149.124399,1.545)); +#234753 = LINE('',#234754,#234755); +#234754 = CARTESIAN_POINT('',(135.4,-146.758578,1.545)); +#234755 = VECTOR('',#234756,1.); +#234756 = DIRECTION('',(0.706748894678,-0.707464486651,0.)); +#234757 = ORIENTED_EDGE('',*,*,#234758,.F.); +#234758 = EDGE_CURVE('',#234759,#234751,#234761,.T.); +#234759 = VERTEX_POINT('',#234760); +#234760 = CARTESIAN_POINT('',(137.763428,-149.124399,1.51)); +#234761 = LINE('',#234762,#234763); +#234762 = CARTESIAN_POINT('',(137.763428,-149.124399,1.51)); +#234763 = VECTOR('',#234764,1.); +#234764 = DIRECTION('',(0.,0.,1.)); +#234765 = ORIENTED_EDGE('',*,*,#234766,.F.); +#234766 = EDGE_CURVE('',#234728,#234759,#234767,.T.); +#234767 = LINE('',#234768,#234769); +#234768 = CARTESIAN_POINT('',(135.4,-146.758578,1.51)); +#234769 = VECTOR('',#234770,1.); +#234770 = DIRECTION('',(0.706748894678,-0.707464486651,0.)); +#234771 = PLANE('',#234772); +#234772 = AXIS2_PLACEMENT_3D('',#234773,#234774,#234775); +#234773 = CARTESIAN_POINT('',(135.4,-146.758578,1.51)); +#234774 = DIRECTION('',(0.707464486651,0.706748894678,-0.)); +#234775 = DIRECTION('',(0.706748894678,-0.707464486651,0.)); +#234776 = ADVANCED_FACE('',(#234777),#234804,.F.); +#234777 = FACE_BOUND('',#234778,.T.); +#234778 = EDGE_LOOP('',(#234779,#234780,#234789,#234797)); +#234779 = ORIENTED_EDGE('',*,*,#234758,.T.); +#234780 = ORIENTED_EDGE('',*,*,#234781,.T.); +#234781 = EDGE_CURVE('',#234751,#234782,#234784,.T.); +#234782 = VERTEX_POINT('',#234783); +#234783 = CARTESIAN_POINT('',(137.624517,-149.263222,1.545)); +#234784 = CIRCLE('',#234785,0.303353482125); +#234785 = AXIS2_PLACEMENT_3D('',#234786,#234787,#234788); +#234786 = CARTESIAN_POINT('',(137.89686299667,-149.3968296091,1.545)); +#234787 = DIRECTION('',(0.,0.,1.)); +#234788 = DIRECTION('',(-0.439866375496,0.898063233691,0.)); +#234789 = ORIENTED_EDGE('',*,*,#234790,.F.); +#234790 = EDGE_CURVE('',#234791,#234782,#234793,.T.); +#234791 = VERTEX_POINT('',#234792); +#234792 = CARTESIAN_POINT('',(137.624517,-149.263222,1.51)); +#234793 = LINE('',#234794,#234795); +#234794 = CARTESIAN_POINT('',(137.624517,-149.263222,1.51)); +#234795 = VECTOR('',#234796,1.); +#234796 = DIRECTION('',(0.,0.,1.)); +#234797 = ORIENTED_EDGE('',*,*,#234798,.F.); +#234798 = EDGE_CURVE('',#234759,#234791,#234799,.T.); +#234799 = CIRCLE('',#234800,0.303353482125); +#234800 = AXIS2_PLACEMENT_3D('',#234801,#234802,#234803); +#234801 = CARTESIAN_POINT('',(137.89686299667,-149.3968296091,1.51)); +#234802 = DIRECTION('',(0.,0.,1.)); +#234803 = DIRECTION('',(-0.439866375496,0.898063233691,0.)); +#234804 = CYLINDRICAL_SURFACE('',#234805,0.303353482125); +#234805 = AXIS2_PLACEMENT_3D('',#234806,#234807,#234808); +#234806 = CARTESIAN_POINT('',(137.89686299667,-149.3968296091,1.51)); +#234807 = DIRECTION('',(-0.,-0.,-1.)); +#234808 = DIRECTION('',(-0.439866375496,0.898063233691,0.)); +#234809 = ADVANCED_FACE('',(#234810),#234835,.T.); +#234810 = FACE_BOUND('',#234811,.T.); +#234811 = EDGE_LOOP('',(#234812,#234813,#234821,#234829)); +#234812 = ORIENTED_EDGE('',*,*,#234790,.T.); +#234813 = ORIENTED_EDGE('',*,*,#234814,.T.); +#234814 = EDGE_CURVE('',#234782,#234815,#234817,.T.); +#234815 = VERTEX_POINT('',#234816); +#234816 = CARTESIAN_POINT('',(135.216853,-146.855557,1.545)); +#234817 = LINE('',#234818,#234819); +#234818 = CARTESIAN_POINT('',(137.624517,-149.263222,1.545)); +#234819 = VECTOR('',#234820,1.); +#234820 = DIRECTION('',(-0.707106634342,0.707106928031,0.)); +#234821 = ORIENTED_EDGE('',*,*,#234822,.F.); +#234822 = EDGE_CURVE('',#234823,#234815,#234825,.T.); +#234823 = VERTEX_POINT('',#234824); +#234824 = CARTESIAN_POINT('',(135.216853,-146.855557,1.51)); +#234825 = LINE('',#234826,#234827); +#234826 = CARTESIAN_POINT('',(135.216853,-146.855557,1.51)); +#234827 = VECTOR('',#234828,1.); +#234828 = DIRECTION('',(0.,0.,1.)); +#234829 = ORIENTED_EDGE('',*,*,#234830,.F.); +#234830 = EDGE_CURVE('',#234791,#234823,#234831,.T.); +#234831 = LINE('',#234832,#234833); +#234832 = CARTESIAN_POINT('',(137.624517,-149.263222,1.51)); +#234833 = VECTOR('',#234834,1.); +#234834 = DIRECTION('',(-0.707106634342,0.707106928031,0.)); +#234835 = PLANE('',#234836); +#234836 = AXIS2_PLACEMENT_3D('',#234837,#234838,#234839); +#234837 = CARTESIAN_POINT('',(137.624517,-149.263222,1.51)); +#234838 = DIRECTION('',(-0.707106928031,-0.707106634342,0.)); +#234839 = DIRECTION('',(-0.707106634342,0.707106928031,0.)); +#234840 = ADVANCED_FACE('',(#234841),#234866,.T.); +#234841 = FACE_BOUND('',#234842,.T.); +#234842 = EDGE_LOOP('',(#234843,#234844,#234852,#234860)); +#234843 = ORIENTED_EDGE('',*,*,#234822,.T.); +#234844 = ORIENTED_EDGE('',*,*,#234845,.T.); +#234845 = EDGE_CURVE('',#234815,#234846,#234848,.T.); +#234846 = VERTEX_POINT('',#234847); +#234847 = CARTESIAN_POINT('',(135.201921,-146.819509,1.545)); +#234848 = LINE('',#234849,#234850); +#234849 = CARTESIAN_POINT('',(135.216853,-146.855557,1.545)); +#234850 = VECTOR('',#234851,1.); +#234851 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#234852 = ORIENTED_EDGE('',*,*,#234853,.F.); +#234853 = EDGE_CURVE('',#234854,#234846,#234856,.T.); +#234854 = VERTEX_POINT('',#234855); +#234855 = CARTESIAN_POINT('',(135.201921,-146.819509,1.51)); +#234856 = LINE('',#234857,#234858); +#234857 = CARTESIAN_POINT('',(135.201921,-146.819509,1.51)); +#234858 = VECTOR('',#234859,1.); +#234859 = DIRECTION('',(0.,0.,1.)); +#234860 = ORIENTED_EDGE('',*,*,#234861,.F.); +#234861 = EDGE_CURVE('',#234823,#234854,#234862,.T.); +#234862 = LINE('',#234863,#234864); +#234863 = CARTESIAN_POINT('',(135.216853,-146.855557,1.51)); +#234864 = VECTOR('',#234865,1.); +#234865 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#234866 = PLANE('',#234867); +#234867 = AXIS2_PLACEMENT_3D('',#234868,#234869,#234870); +#234868 = CARTESIAN_POINT('',(135.216853,-146.855557,1.51)); +#234869 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#234870 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#234871 = ADVANCED_FACE('',(#234872),#234897,.T.); +#234872 = FACE_BOUND('',#234873,.T.); +#234873 = EDGE_LOOP('',(#234874,#234875,#234883,#234891)); +#234874 = ORIENTED_EDGE('',*,*,#234853,.T.); +#234875 = ORIENTED_EDGE('',*,*,#234876,.T.); +#234876 = EDGE_CURVE('',#234846,#234877,#234879,.T.); +#234877 = VERTEX_POINT('',#234878); +#234878 = CARTESIAN_POINT('',(135.2,-141.970974,1.545)); +#234879 = LINE('',#234880,#234881); +#234880 = CARTESIAN_POINT('',(135.201921,-146.819509,1.545)); +#234881 = VECTOR('',#234882,1.); +#234882 = DIRECTION('',(-3.962021206889E-04,0.999999921512,0.)); +#234883 = ORIENTED_EDGE('',*,*,#234884,.F.); +#234884 = EDGE_CURVE('',#234885,#234877,#234887,.T.); +#234885 = VERTEX_POINT('',#234886); +#234886 = CARTESIAN_POINT('',(135.2,-141.970974,1.51)); +#234887 = LINE('',#234888,#234889); +#234888 = CARTESIAN_POINT('',(135.2,-141.970974,1.51)); +#234889 = VECTOR('',#234890,1.); +#234890 = DIRECTION('',(0.,0.,1.)); +#234891 = ORIENTED_EDGE('',*,*,#234892,.F.); +#234892 = EDGE_CURVE('',#234854,#234885,#234893,.T.); +#234893 = LINE('',#234894,#234895); +#234894 = CARTESIAN_POINT('',(135.201921,-146.819509,1.51)); +#234895 = VECTOR('',#234896,1.); +#234896 = DIRECTION('',(-3.962021206889E-04,0.999999921512,0.)); +#234897 = PLANE('',#234898); +#234898 = AXIS2_PLACEMENT_3D('',#234899,#234900,#234901); +#234899 = CARTESIAN_POINT('',(135.201921,-146.819509,1.51)); +#234900 = DIRECTION('',(-0.999999921512,-3.962021206889E-04,0.)); +#234901 = DIRECTION('',(-3.962021206889E-04,0.999999921512,0.)); +#234902 = ADVANCED_FACE('',(#234903),#234928,.T.); +#234903 = FACE_BOUND('',#234904,.T.); +#234904 = EDGE_LOOP('',(#234905,#234906,#234914,#234922)); +#234905 = ORIENTED_EDGE('',*,*,#234884,.T.); +#234906 = ORIENTED_EDGE('',*,*,#234907,.T.); +#234907 = EDGE_CURVE('',#234877,#234908,#234910,.T.); +#234908 = VERTEX_POINT('',#234909); +#234909 = CARTESIAN_POINT('',(129.829026,-136.6,1.545)); +#234910 = LINE('',#234911,#234912); +#234911 = CARTESIAN_POINT('',(135.2,-141.970974,1.545)); +#234912 = VECTOR('',#234913,1.); +#234913 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#234914 = ORIENTED_EDGE('',*,*,#234915,.F.); +#234915 = EDGE_CURVE('',#234916,#234908,#234918,.T.); +#234916 = VERTEX_POINT('',#234917); +#234917 = CARTESIAN_POINT('',(129.829026,-136.6,1.51)); +#234918 = LINE('',#234919,#234920); +#234919 = CARTESIAN_POINT('',(129.829026,-136.6,1.51)); +#234920 = VECTOR('',#234921,1.); +#234921 = DIRECTION('',(0.,0.,1.)); +#234922 = ORIENTED_EDGE('',*,*,#234923,.F.); +#234923 = EDGE_CURVE('',#234885,#234916,#234924,.T.); +#234924 = LINE('',#234925,#234926); +#234925 = CARTESIAN_POINT('',(135.2,-141.970974,1.51)); +#234926 = VECTOR('',#234927,1.); +#234927 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#234928 = PLANE('',#234929); +#234929 = AXIS2_PLACEMENT_3D('',#234930,#234931,#234932); +#234930 = CARTESIAN_POINT('',(135.2,-141.970974,1.51)); +#234931 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#234932 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#234933 = ADVANCED_FACE('',(#234934),#234959,.T.); +#234934 = FACE_BOUND('',#234935,.T.); +#234935 = EDGE_LOOP('',(#234936,#234937,#234945,#234953)); +#234936 = ORIENTED_EDGE('',*,*,#234915,.T.); +#234937 = ORIENTED_EDGE('',*,*,#234938,.T.); +#234938 = EDGE_CURVE('',#234908,#234939,#234941,.T.); +#234939 = VERTEX_POINT('',#234940); +#234940 = CARTESIAN_POINT('',(123.780491,-136.598079,1.545)); +#234941 = LINE('',#234942,#234943); +#234942 = CARTESIAN_POINT('',(129.829026,-136.6,1.545)); +#234943 = VECTOR('',#234944,1.); +#234944 = DIRECTION('',(-0.999999949566,3.175975509934E-04,0.)); +#234945 = ORIENTED_EDGE('',*,*,#234946,.F.); +#234946 = EDGE_CURVE('',#234947,#234939,#234949,.T.); +#234947 = VERTEX_POINT('',#234948); +#234948 = CARTESIAN_POINT('',(123.780491,-136.598079,1.51)); +#234949 = LINE('',#234950,#234951); +#234950 = CARTESIAN_POINT('',(123.780491,-136.598079,1.51)); +#234951 = VECTOR('',#234952,1.); +#234952 = DIRECTION('',(0.,0.,1.)); +#234953 = ORIENTED_EDGE('',*,*,#234954,.F.); +#234954 = EDGE_CURVE('',#234916,#234947,#234955,.T.); +#234955 = LINE('',#234956,#234957); +#234956 = CARTESIAN_POINT('',(129.829026,-136.6,1.51)); +#234957 = VECTOR('',#234958,1.); +#234958 = DIRECTION('',(-0.999999949566,3.175975509934E-04,0.)); +#234959 = PLANE('',#234960); +#234960 = AXIS2_PLACEMENT_3D('',#234961,#234962,#234963); +#234961 = CARTESIAN_POINT('',(129.829026,-136.6,1.51)); +#234962 = DIRECTION('',(-3.175975509934E-04,-0.999999949566,0.)); +#234963 = DIRECTION('',(-0.999999949566,3.175975509934E-04,0.)); +#234964 = ADVANCED_FACE('',(#234965),#234990,.T.); +#234965 = FACE_BOUND('',#234966,.T.); +#234966 = EDGE_LOOP('',(#234967,#234968,#234976,#234984)); +#234967 = ORIENTED_EDGE('',*,*,#234946,.T.); +#234968 = ORIENTED_EDGE('',*,*,#234969,.T.); +#234969 = EDGE_CURVE('',#234939,#234970,#234972,.T.); +#234970 = VERTEX_POINT('',#234971); +#234971 = CARTESIAN_POINT('',(123.744443,-136.583147,1.545)); +#234972 = LINE('',#234973,#234974); +#234973 = CARTESIAN_POINT('',(123.780491,-136.598079,1.545)); +#234974 = VECTOR('',#234975,1.); +#234975 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#234976 = ORIENTED_EDGE('',*,*,#234977,.F.); +#234977 = EDGE_CURVE('',#234978,#234970,#234980,.T.); +#234978 = VERTEX_POINT('',#234979); +#234979 = CARTESIAN_POINT('',(123.744443,-136.583147,1.51)); +#234980 = LINE('',#234981,#234982); +#234981 = CARTESIAN_POINT('',(123.744443,-136.583147,1.51)); +#234982 = VECTOR('',#234983,1.); +#234983 = DIRECTION('',(0.,0.,1.)); +#234984 = ORIENTED_EDGE('',*,*,#234985,.F.); +#234985 = EDGE_CURVE('',#234947,#234978,#234986,.T.); +#234986 = LINE('',#234987,#234988); +#234987 = CARTESIAN_POINT('',(123.780491,-136.598079,1.51)); +#234988 = VECTOR('',#234989,1.); +#234989 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#234990 = PLANE('',#234991); +#234991 = AXIS2_PLACEMENT_3D('',#234992,#234993,#234994); +#234992 = CARTESIAN_POINT('',(123.780491,-136.598079,1.51)); +#234993 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#234994 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#234995 = ADVANCED_FACE('',(#234996),#235021,.T.); +#234996 = FACE_BOUND('',#234997,.T.); +#234997 = EDGE_LOOP('',(#234998,#234999,#235007,#235015)); +#234998 = ORIENTED_EDGE('',*,*,#234977,.T.); +#234999 = ORIENTED_EDGE('',*,*,#235000,.T.); +#235000 = EDGE_CURVE('',#234970,#235001,#235003,.T.); +#235001 = VERTEX_POINT('',#235002); +#235002 = CARTESIAN_POINT('',(121.516853,-134.355557,1.545)); +#235003 = LINE('',#235004,#235005); +#235004 = CARTESIAN_POINT('',(123.744443,-136.583147,1.545)); +#235005 = VECTOR('',#235006,1.); +#235006 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235007 = ORIENTED_EDGE('',*,*,#235008,.F.); +#235008 = EDGE_CURVE('',#235009,#235001,#235011,.T.); +#235009 = VERTEX_POINT('',#235010); +#235010 = CARTESIAN_POINT('',(121.516853,-134.355557,1.51)); +#235011 = LINE('',#235012,#235013); +#235012 = CARTESIAN_POINT('',(121.516853,-134.355557,1.51)); +#235013 = VECTOR('',#235014,1.); +#235014 = DIRECTION('',(0.,0.,1.)); +#235015 = ORIENTED_EDGE('',*,*,#235016,.F.); +#235016 = EDGE_CURVE('',#234978,#235009,#235017,.T.); +#235017 = LINE('',#235018,#235019); +#235018 = CARTESIAN_POINT('',(123.744443,-136.583147,1.51)); +#235019 = VECTOR('',#235020,1.); +#235020 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235021 = PLANE('',#235022); +#235022 = AXIS2_PLACEMENT_3D('',#235023,#235024,#235025); +#235023 = CARTESIAN_POINT('',(123.744443,-136.583147,1.51)); +#235024 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#235025 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#235026 = ADVANCED_FACE('',(#235027),#235052,.T.); +#235027 = FACE_BOUND('',#235028,.T.); +#235028 = EDGE_LOOP('',(#235029,#235030,#235038,#235046)); +#235029 = ORIENTED_EDGE('',*,*,#235008,.T.); +#235030 = ORIENTED_EDGE('',*,*,#235031,.T.); +#235031 = EDGE_CURVE('',#235001,#235032,#235034,.T.); +#235032 = VERTEX_POINT('',#235033); +#235033 = CARTESIAN_POINT('',(121.501921,-134.319509,1.545)); +#235034 = LINE('',#235035,#235036); +#235035 = CARTESIAN_POINT('',(121.516853,-134.355557,1.545)); +#235036 = VECTOR('',#235037,1.); +#235037 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#235038 = ORIENTED_EDGE('',*,*,#235039,.F.); +#235039 = EDGE_CURVE('',#235040,#235032,#235042,.T.); +#235040 = VERTEX_POINT('',#235041); +#235041 = CARTESIAN_POINT('',(121.501921,-134.319509,1.51)); +#235042 = LINE('',#235043,#235044); +#235043 = CARTESIAN_POINT('',(121.501921,-134.319509,1.51)); +#235044 = VECTOR('',#235045,1.); +#235045 = DIRECTION('',(0.,0.,1.)); +#235046 = ORIENTED_EDGE('',*,*,#235047,.F.); +#235047 = EDGE_CURVE('',#235009,#235040,#235048,.T.); +#235048 = LINE('',#235049,#235050); +#235049 = CARTESIAN_POINT('',(121.516853,-134.355557,1.51)); +#235050 = VECTOR('',#235051,1.); +#235051 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#235052 = PLANE('',#235053); +#235053 = AXIS2_PLACEMENT_3D('',#235054,#235055,#235056); +#235054 = CARTESIAN_POINT('',(121.516853,-134.355557,1.51)); +#235055 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#235056 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#235057 = ADVANCED_FACE('',(#235058),#235083,.T.); +#235058 = FACE_BOUND('',#235059,.T.); +#235059 = EDGE_LOOP('',(#235060,#235061,#235069,#235077)); +#235060 = ORIENTED_EDGE('',*,*,#235039,.T.); +#235061 = ORIENTED_EDGE('',*,*,#235062,.T.); +#235062 = EDGE_CURVE('',#235032,#235063,#235065,.T.); +#235063 = VERTEX_POINT('',#235064); +#235064 = CARTESIAN_POINT('',(121.501921,-118.780491,1.545)); +#235065 = LINE('',#235066,#235067); +#235066 = CARTESIAN_POINT('',(121.501921,-134.319509,1.545)); +#235067 = VECTOR('',#235068,1.); +#235068 = DIRECTION('',(0.,1.,0.)); +#235069 = ORIENTED_EDGE('',*,*,#235070,.F.); +#235070 = EDGE_CURVE('',#235071,#235063,#235073,.T.); +#235071 = VERTEX_POINT('',#235072); +#235072 = CARTESIAN_POINT('',(121.501921,-118.780491,1.51)); +#235073 = LINE('',#235074,#235075); +#235074 = CARTESIAN_POINT('',(121.501921,-118.780491,1.51)); +#235075 = VECTOR('',#235076,1.); +#235076 = DIRECTION('',(0.,0.,1.)); +#235077 = ORIENTED_EDGE('',*,*,#235078,.F.); +#235078 = EDGE_CURVE('',#235040,#235071,#235079,.T.); +#235079 = LINE('',#235080,#235081); +#235080 = CARTESIAN_POINT('',(121.501921,-134.319509,1.51)); +#235081 = VECTOR('',#235082,1.); +#235082 = DIRECTION('',(0.,1.,0.)); +#235083 = PLANE('',#235084); +#235084 = AXIS2_PLACEMENT_3D('',#235085,#235086,#235087); +#235085 = CARTESIAN_POINT('',(121.501921,-134.319509,1.51)); +#235086 = DIRECTION('',(-1.,0.,0.)); +#235087 = DIRECTION('',(0.,1.,0.)); +#235088 = ADVANCED_FACE('',(#235089),#235114,.T.); +#235089 = FACE_BOUND('',#235090,.T.); +#235090 = EDGE_LOOP('',(#235091,#235092,#235100,#235108)); +#235091 = ORIENTED_EDGE('',*,*,#235070,.T.); +#235092 = ORIENTED_EDGE('',*,*,#235093,.T.); +#235093 = EDGE_CURVE('',#235063,#235094,#235096,.T.); +#235094 = VERTEX_POINT('',#235095); +#235095 = CARTESIAN_POINT('',(121.516853,-118.744443,1.545)); +#235096 = LINE('',#235097,#235098); +#235097 = CARTESIAN_POINT('',(121.501921,-118.780491,1.545)); +#235098 = VECTOR('',#235099,1.); +#235099 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235100 = ORIENTED_EDGE('',*,*,#235101,.F.); +#235101 = EDGE_CURVE('',#235102,#235094,#235104,.T.); +#235102 = VERTEX_POINT('',#235103); +#235103 = CARTESIAN_POINT('',(121.516853,-118.744443,1.51)); +#235104 = LINE('',#235105,#235106); +#235105 = CARTESIAN_POINT('',(121.516853,-118.744443,1.51)); +#235106 = VECTOR('',#235107,1.); +#235107 = DIRECTION('',(0.,0.,1.)); +#235108 = ORIENTED_EDGE('',*,*,#235109,.F.); +#235109 = EDGE_CURVE('',#235071,#235102,#235110,.T.); +#235110 = LINE('',#235111,#235112); +#235111 = CARTESIAN_POINT('',(121.501921,-118.780491,1.51)); +#235112 = VECTOR('',#235113,1.); +#235113 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235114 = PLANE('',#235115); +#235115 = AXIS2_PLACEMENT_3D('',#235116,#235117,#235118); +#235116 = CARTESIAN_POINT('',(121.501921,-118.780491,1.51)); +#235117 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#235118 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235119 = ADVANCED_FACE('',(#235120),#235145,.T.); +#235120 = FACE_BOUND('',#235121,.T.); +#235121 = EDGE_LOOP('',(#235122,#235123,#235131,#235139)); +#235122 = ORIENTED_EDGE('',*,*,#235101,.T.); +#235123 = ORIENTED_EDGE('',*,*,#235124,.T.); +#235124 = EDGE_CURVE('',#235094,#235125,#235127,.T.); +#235125 = VERTEX_POINT('',#235126); +#235126 = CARTESIAN_POINT('',(126.,-114.258578,1.545)); +#235127 = LINE('',#235128,#235129); +#235128 = CARTESIAN_POINT('',(121.516853,-118.744443,1.545)); +#235129 = VECTOR('',#235130,1.); +#235130 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#235131 = ORIENTED_EDGE('',*,*,#235132,.F.); +#235132 = EDGE_CURVE('',#235133,#235125,#235135,.T.); +#235133 = VERTEX_POINT('',#235134); +#235134 = CARTESIAN_POINT('',(126.,-114.258578,1.51)); +#235135 = LINE('',#235136,#235137); +#235136 = CARTESIAN_POINT('',(126.,-114.258578,1.51)); +#235137 = VECTOR('',#235138,1.); +#235138 = DIRECTION('',(0.,0.,1.)); +#235139 = ORIENTED_EDGE('',*,*,#235140,.F.); +#235140 = EDGE_CURVE('',#235102,#235133,#235141,.T.); +#235141 = LINE('',#235142,#235143); +#235142 = CARTESIAN_POINT('',(121.516853,-118.744443,1.51)); +#235143 = VECTOR('',#235144,1.); +#235144 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#235145 = PLANE('',#235146); +#235146 = AXIS2_PLACEMENT_3D('',#235147,#235148,#235149); +#235147 = CARTESIAN_POINT('',(121.516853,-118.744443,1.51)); +#235148 = DIRECTION('',(-0.70732103276,0.706892464676,0.)); +#235149 = DIRECTION('',(0.706892464676,0.70732103276,0.)); +#235150 = ADVANCED_FACE('',(#235151),#235176,.T.); +#235151 = FACE_BOUND('',#235152,.T.); +#235152 = EDGE_LOOP('',(#235153,#235154,#235162,#235170)); +#235153 = ORIENTED_EDGE('',*,*,#235132,.T.); +#235154 = ORIENTED_EDGE('',*,*,#235155,.T.); +#235155 = EDGE_CURVE('',#235125,#235156,#235158,.T.); +#235156 = VERTEX_POINT('',#235157); +#235157 = CARTESIAN_POINT('',(126.001921,-103.080491,1.545)); +#235158 = LINE('',#235159,#235160); +#235159 = CARTESIAN_POINT('',(126.,-114.258578,1.545)); +#235160 = VECTOR('',#235161,1.); +#235161 = DIRECTION('',(1.71854090206E-04,0.999999985233,0.)); +#235162 = ORIENTED_EDGE('',*,*,#235163,.F.); +#235163 = EDGE_CURVE('',#235164,#235156,#235166,.T.); +#235164 = VERTEX_POINT('',#235165); +#235165 = CARTESIAN_POINT('',(126.001921,-103.080491,1.51)); +#235166 = LINE('',#235167,#235168); +#235167 = CARTESIAN_POINT('',(126.001921,-103.080491,1.51)); +#235168 = VECTOR('',#235169,1.); +#235169 = DIRECTION('',(0.,0.,1.)); +#235170 = ORIENTED_EDGE('',*,*,#235171,.F.); +#235171 = EDGE_CURVE('',#235133,#235164,#235172,.T.); +#235172 = LINE('',#235173,#235174); +#235173 = CARTESIAN_POINT('',(126.,-114.258578,1.51)); +#235174 = VECTOR('',#235175,1.); +#235175 = DIRECTION('',(1.71854090206E-04,0.999999985233,0.)); +#235176 = PLANE('',#235177); +#235177 = AXIS2_PLACEMENT_3D('',#235178,#235179,#235180); +#235178 = CARTESIAN_POINT('',(126.,-114.258578,1.51)); +#235179 = DIRECTION('',(-0.999999985233,1.71854090206E-04,0.)); +#235180 = DIRECTION('',(1.71854090206E-04,0.999999985233,0.)); +#235181 = ADVANCED_FACE('',(#235182),#235207,.T.); +#235182 = FACE_BOUND('',#235183,.T.); +#235183 = EDGE_LOOP('',(#235184,#235185,#235193,#235201)); +#235184 = ORIENTED_EDGE('',*,*,#235163,.T.); +#235185 = ORIENTED_EDGE('',*,*,#235186,.T.); +#235186 = EDGE_CURVE('',#235156,#235187,#235189,.T.); +#235187 = VERTEX_POINT('',#235188); +#235188 = CARTESIAN_POINT('',(126.016853,-103.044443,1.545)); +#235189 = LINE('',#235190,#235191); +#235190 = CARTESIAN_POINT('',(126.001921,-103.080491,1.545)); +#235191 = VECTOR('',#235192,1.); +#235192 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235193 = ORIENTED_EDGE('',*,*,#235194,.F.); +#235194 = EDGE_CURVE('',#235195,#235187,#235197,.T.); +#235195 = VERTEX_POINT('',#235196); +#235196 = CARTESIAN_POINT('',(126.016853,-103.044443,1.51)); +#235197 = LINE('',#235198,#235199); +#235198 = CARTESIAN_POINT('',(126.016853,-103.044443,1.51)); +#235199 = VECTOR('',#235200,1.); +#235200 = DIRECTION('',(0.,0.,1.)); +#235201 = ORIENTED_EDGE('',*,*,#235202,.F.); +#235202 = EDGE_CURVE('',#235164,#235195,#235203,.T.); +#235203 = LINE('',#235204,#235205); +#235204 = CARTESIAN_POINT('',(126.001921,-103.080491,1.51)); +#235205 = VECTOR('',#235206,1.); +#235206 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235207 = PLANE('',#235208); +#235208 = AXIS2_PLACEMENT_3D('',#235209,#235210,#235211); +#235209 = CARTESIAN_POINT('',(126.001921,-103.080491,1.51)); +#235210 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#235211 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235212 = ADVANCED_FACE('',(#235213),#235238,.T.); +#235213 = FACE_BOUND('',#235214,.T.); +#235214 = EDGE_LOOP('',(#235215,#235216,#235224,#235232)); +#235215 = ORIENTED_EDGE('',*,*,#235194,.T.); +#235216 = ORIENTED_EDGE('',*,*,#235217,.T.); +#235217 = EDGE_CURVE('',#235187,#235218,#235220,.T.); +#235218 = VERTEX_POINT('',#235219); +#235219 = CARTESIAN_POINT('',(129.1,-99.958578,1.545)); +#235220 = LINE('',#235221,#235222); +#235221 = CARTESIAN_POINT('',(126.016853,-103.044443,1.545)); +#235222 = VECTOR('',#235223,1.); +#235223 = DIRECTION('',(0.706795168981,0.707418256129,0.)); +#235224 = ORIENTED_EDGE('',*,*,#235225,.F.); +#235225 = EDGE_CURVE('',#235226,#235218,#235228,.T.); +#235226 = VERTEX_POINT('',#235227); +#235227 = CARTESIAN_POINT('',(129.1,-99.958578,1.51)); +#235228 = LINE('',#235229,#235230); +#235229 = CARTESIAN_POINT('',(129.1,-99.958578,1.51)); +#235230 = VECTOR('',#235231,1.); +#235231 = DIRECTION('',(0.,0.,1.)); +#235232 = ORIENTED_EDGE('',*,*,#235233,.F.); +#235233 = EDGE_CURVE('',#235195,#235226,#235234,.T.); +#235234 = LINE('',#235235,#235236); +#235235 = CARTESIAN_POINT('',(126.016853,-103.044443,1.51)); +#235236 = VECTOR('',#235237,1.); +#235237 = DIRECTION('',(0.706795168981,0.707418256129,0.)); +#235238 = PLANE('',#235239); +#235239 = AXIS2_PLACEMENT_3D('',#235240,#235241,#235242); +#235240 = CARTESIAN_POINT('',(126.016853,-103.044443,1.51)); +#235241 = DIRECTION('',(-0.707418256129,0.706795168981,0.)); +#235242 = DIRECTION('',(0.706795168981,0.707418256129,0.)); +#235243 = ADVANCED_FACE('',(#235244),#235269,.T.); +#235244 = FACE_BOUND('',#235245,.T.); +#235245 = EDGE_LOOP('',(#235246,#235247,#235255,#235263)); +#235246 = ORIENTED_EDGE('',*,*,#235225,.T.); +#235247 = ORIENTED_EDGE('',*,*,#235248,.T.); +#235248 = EDGE_CURVE('',#235218,#235249,#235251,.T.); +#235249 = VERTEX_POINT('',#235250); +#235250 = CARTESIAN_POINT('',(129.101921,-88.080491,1.545)); +#235251 = LINE('',#235252,#235253); +#235252 = CARTESIAN_POINT('',(129.1,-99.958578,1.545)); +#235253 = VECTOR('',#235254,1.); +#235254 = DIRECTION('',(1.617263768895E-04,0.999999986922,0.)); +#235255 = ORIENTED_EDGE('',*,*,#235256,.F.); +#235256 = EDGE_CURVE('',#235257,#235249,#235259,.T.); +#235257 = VERTEX_POINT('',#235258); +#235258 = CARTESIAN_POINT('',(129.101921,-88.080491,1.51)); +#235259 = LINE('',#235260,#235261); +#235260 = CARTESIAN_POINT('',(129.101921,-88.080491,1.51)); +#235261 = VECTOR('',#235262,1.); +#235262 = DIRECTION('',(0.,0.,1.)); +#235263 = ORIENTED_EDGE('',*,*,#235264,.F.); +#235264 = EDGE_CURVE('',#235226,#235257,#235265,.T.); +#235265 = LINE('',#235266,#235267); +#235266 = CARTESIAN_POINT('',(129.1,-99.958578,1.51)); +#235267 = VECTOR('',#235268,1.); +#235268 = DIRECTION('',(1.617263768895E-04,0.999999986922,0.)); +#235269 = PLANE('',#235270); +#235270 = AXIS2_PLACEMENT_3D('',#235271,#235272,#235273); +#235271 = CARTESIAN_POINT('',(129.1,-99.958578,1.51)); +#235272 = DIRECTION('',(-0.999999986922,1.617263768895E-04,0.)); +#235273 = DIRECTION('',(1.617263768895E-04,0.999999986922,0.)); +#235274 = ADVANCED_FACE('',(#235275),#235300,.T.); +#235275 = FACE_BOUND('',#235276,.T.); +#235276 = EDGE_LOOP('',(#235277,#235278,#235286,#235294)); +#235277 = ORIENTED_EDGE('',*,*,#235256,.T.); +#235278 = ORIENTED_EDGE('',*,*,#235279,.T.); +#235279 = EDGE_CURVE('',#235249,#235280,#235282,.T.); +#235280 = VERTEX_POINT('',#235281); +#235281 = CARTESIAN_POINT('',(129.116853,-88.044443,1.545)); +#235282 = LINE('',#235283,#235284); +#235283 = CARTESIAN_POINT('',(129.101921,-88.080491,1.545)); +#235284 = VECTOR('',#235285,1.); +#235285 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235286 = ORIENTED_EDGE('',*,*,#235287,.F.); +#235287 = EDGE_CURVE('',#235288,#235280,#235290,.T.); +#235288 = VERTEX_POINT('',#235289); +#235289 = CARTESIAN_POINT('',(129.116853,-88.044443,1.51)); +#235290 = LINE('',#235291,#235292); +#235291 = CARTESIAN_POINT('',(129.116853,-88.044443,1.51)); +#235292 = VECTOR('',#235293,1.); +#235293 = DIRECTION('',(0.,0.,1.)); +#235294 = ORIENTED_EDGE('',*,*,#235295,.F.); +#235295 = EDGE_CURVE('',#235257,#235288,#235296,.T.); +#235296 = LINE('',#235297,#235298); +#235297 = CARTESIAN_POINT('',(129.101921,-88.080491,1.51)); +#235298 = VECTOR('',#235299,1.); +#235299 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235300 = PLANE('',#235301); +#235301 = AXIS2_PLACEMENT_3D('',#235302,#235303,#235304); +#235302 = CARTESIAN_POINT('',(129.101921,-88.080491,1.51)); +#235303 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#235304 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235305 = ADVANCED_FACE('',(#235306),#235331,.T.); +#235306 = FACE_BOUND('',#235307,.T.); +#235307 = EDGE_LOOP('',(#235308,#235309,#235317,#235325)); +#235308 = ORIENTED_EDGE('',*,*,#235287,.T.); +#235309 = ORIENTED_EDGE('',*,*,#235310,.T.); +#235310 = EDGE_CURVE('',#235280,#235311,#235313,.T.); +#235311 = VERTEX_POINT('',#235312); +#235312 = CARTESIAN_POINT('',(130.,-87.158578,1.545)); +#235313 = LINE('',#235314,#235315); +#235314 = CARTESIAN_POINT('',(129.116853,-88.044443,1.545)); +#235315 = VECTOR('',#235316,1.); +#235316 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#235317 = ORIENTED_EDGE('',*,*,#235318,.F.); +#235318 = EDGE_CURVE('',#235319,#235311,#235321,.T.); +#235319 = VERTEX_POINT('',#235320); +#235320 = CARTESIAN_POINT('',(130.,-87.158578,1.51)); +#235321 = LINE('',#235322,#235323); +#235322 = CARTESIAN_POINT('',(130.,-87.158578,1.51)); +#235323 = VECTOR('',#235324,1.); +#235324 = DIRECTION('',(0.,0.,1.)); +#235325 = ORIENTED_EDGE('',*,*,#235326,.F.); +#235326 = EDGE_CURVE('',#235288,#235319,#235327,.T.); +#235327 = LINE('',#235328,#235329); +#235328 = CARTESIAN_POINT('',(129.116853,-88.044443,1.51)); +#235329 = VECTOR('',#235330,1.); +#235330 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#235331 = PLANE('',#235332); +#235332 = AXIS2_PLACEMENT_3D('',#235333,#235334,#235335); +#235333 = CARTESIAN_POINT('',(129.116853,-88.044443,1.51)); +#235334 = DIRECTION('',(-0.708192380097,0.706019513025,0.)); +#235335 = DIRECTION('',(0.706019513025,0.708192380097,0.)); +#235336 = ADVANCED_FACE('',(#235337),#235362,.T.); +#235337 = FACE_BOUND('',#235338,.T.); +#235338 = EDGE_LOOP('',(#235339,#235340,#235348,#235356)); +#235339 = ORIENTED_EDGE('',*,*,#235318,.T.); +#235340 = ORIENTED_EDGE('',*,*,#235341,.T.); +#235341 = EDGE_CURVE('',#235311,#235342,#235344,.T.); +#235342 = VERTEX_POINT('',#235343); +#235343 = CARTESIAN_POINT('',(130.001921,-86.916276,1.545)); +#235344 = LINE('',#235345,#235346); +#235345 = CARTESIAN_POINT('',(130.,-87.158578,1.545)); +#235346 = VECTOR('',#235347,1.); +#235347 = DIRECTION('',(7.927873606091E-03,0.999968573916,0.)); +#235348 = ORIENTED_EDGE('',*,*,#235349,.F.); +#235349 = EDGE_CURVE('',#235350,#235342,#235352,.T.); +#235350 = VERTEX_POINT('',#235351); +#235351 = CARTESIAN_POINT('',(130.001921,-86.916276,1.51)); +#235352 = LINE('',#235353,#235354); +#235353 = CARTESIAN_POINT('',(130.001921,-86.916276,1.51)); +#235354 = VECTOR('',#235355,1.); +#235355 = DIRECTION('',(0.,0.,1.)); +#235356 = ORIENTED_EDGE('',*,*,#235357,.F.); +#235357 = EDGE_CURVE('',#235319,#235350,#235358,.T.); +#235358 = LINE('',#235359,#235360); +#235359 = CARTESIAN_POINT('',(130.,-87.158578,1.51)); +#235360 = VECTOR('',#235361,1.); +#235361 = DIRECTION('',(7.927873606091E-03,0.999968573916,0.)); +#235362 = PLANE('',#235363); +#235363 = AXIS2_PLACEMENT_3D('',#235364,#235365,#235366); +#235364 = CARTESIAN_POINT('',(130.,-87.158578,1.51)); +#235365 = DIRECTION('',(-0.999968573916,7.927873606091E-03,0.)); +#235366 = DIRECTION('',(7.927873606091E-03,0.999968573916,0.)); +#235367 = ADVANCED_FACE('',(#235368),#235393,.T.); +#235368 = FACE_BOUND('',#235369,.T.); +#235369 = EDGE_LOOP('',(#235370,#235371,#235379,#235387)); +#235370 = ORIENTED_EDGE('',*,*,#235349,.T.); +#235371 = ORIENTED_EDGE('',*,*,#235372,.T.); +#235372 = EDGE_CURVE('',#235342,#235373,#235375,.T.); +#235373 = VERTEX_POINT('',#235374); +#235374 = CARTESIAN_POINT('',(130.016853,-86.880228,1.545)); +#235375 = LINE('',#235376,#235377); +#235376 = CARTESIAN_POINT('',(130.001921,-86.916276,1.545)); +#235377 = VECTOR('',#235378,1.); +#235378 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235379 = ORIENTED_EDGE('',*,*,#235380,.F.); +#235380 = EDGE_CURVE('',#235381,#235373,#235383,.T.); +#235381 = VERTEX_POINT('',#235382); +#235382 = CARTESIAN_POINT('',(130.016853,-86.880228,1.51)); +#235383 = LINE('',#235384,#235385); +#235384 = CARTESIAN_POINT('',(130.016853,-86.880228,1.51)); +#235385 = VECTOR('',#235386,1.); +#235386 = DIRECTION('',(0.,0.,1.)); +#235387 = ORIENTED_EDGE('',*,*,#235388,.F.); +#235388 = EDGE_CURVE('',#235350,#235381,#235389,.T.); +#235389 = LINE('',#235390,#235391); +#235390 = CARTESIAN_POINT('',(130.001921,-86.916276,1.51)); +#235391 = VECTOR('',#235392,1.); +#235392 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235393 = PLANE('',#235394); +#235394 = AXIS2_PLACEMENT_3D('',#235395,#235396,#235397); +#235395 = CARTESIAN_POINT('',(130.001921,-86.916276,1.51)); +#235396 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#235397 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#235398 = ADVANCED_FACE('',(#235399),#235424,.T.); +#235399 = FACE_BOUND('',#235400,.T.); +#235400 = EDGE_LOOP('',(#235401,#235402,#235410,#235418)); +#235401 = ORIENTED_EDGE('',*,*,#235380,.T.); +#235402 = ORIENTED_EDGE('',*,*,#235403,.T.); +#235403 = EDGE_CURVE('',#235373,#235404,#235406,.T.); +#235404 = VERTEX_POINT('',#235405); +#235405 = CARTESIAN_POINT('',(130.630229,-86.266853,1.545)); +#235406 = LINE('',#235407,#235408); +#235407 = CARTESIAN_POINT('',(130.016853,-86.880228,1.545)); +#235408 = VECTOR('',#235409,1.); +#235409 = DIRECTION('',(0.707107357592,0.70710620478,0.)); +#235410 = ORIENTED_EDGE('',*,*,#235411,.F.); +#235411 = EDGE_CURVE('',#235412,#235404,#235414,.T.); +#235412 = VERTEX_POINT('',#235413); +#235413 = CARTESIAN_POINT('',(130.630229,-86.266853,1.51)); +#235414 = LINE('',#235415,#235416); +#235415 = CARTESIAN_POINT('',(130.630229,-86.266853,1.51)); +#235416 = VECTOR('',#235417,1.); +#235417 = DIRECTION('',(0.,0.,1.)); +#235418 = ORIENTED_EDGE('',*,*,#235419,.F.); +#235419 = EDGE_CURVE('',#235381,#235412,#235420,.T.); +#235420 = LINE('',#235421,#235422); +#235421 = CARTESIAN_POINT('',(130.016853,-86.880228,1.51)); +#235422 = VECTOR('',#235423,1.); +#235423 = DIRECTION('',(0.707107357592,0.70710620478,0.)); +#235424 = PLANE('',#235425); +#235425 = AXIS2_PLACEMENT_3D('',#235426,#235427,#235428); +#235426 = CARTESIAN_POINT('',(130.016853,-86.880228,1.51)); +#235427 = DIRECTION('',(-0.70710620478,0.707107357592,0.)); +#235428 = DIRECTION('',(0.707107357592,0.70710620478,0.)); +#235429 = ADVANCED_FACE('',(#235430),#235455,.T.); +#235430 = FACE_BOUND('',#235431,.T.); +#235431 = EDGE_LOOP('',(#235432,#235433,#235441,#235449)); +#235432 = ORIENTED_EDGE('',*,*,#235411,.T.); +#235433 = ORIENTED_EDGE('',*,*,#235434,.T.); +#235434 = EDGE_CURVE('',#235404,#235435,#235437,.T.); +#235435 = VERTEX_POINT('',#235436); +#235436 = CARTESIAN_POINT('',(130.666277,-86.251921,1.545)); +#235437 = LINE('',#235438,#235439); +#235438 = CARTESIAN_POINT('',(130.630229,-86.266853,1.545)); +#235439 = VECTOR('',#235440,1.); +#235440 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#235441 = ORIENTED_EDGE('',*,*,#235442,.F.); +#235442 = EDGE_CURVE('',#235443,#235435,#235445,.T.); +#235443 = VERTEX_POINT('',#235444); +#235444 = CARTESIAN_POINT('',(130.666277,-86.251921,1.51)); +#235445 = LINE('',#235446,#235447); +#235446 = CARTESIAN_POINT('',(130.666277,-86.251921,1.51)); +#235447 = VECTOR('',#235448,1.); +#235448 = DIRECTION('',(0.,0.,1.)); +#235449 = ORIENTED_EDGE('',*,*,#235450,.F.); +#235450 = EDGE_CURVE('',#235412,#235443,#235451,.T.); +#235451 = LINE('',#235452,#235453); +#235452 = CARTESIAN_POINT('',(130.630229,-86.266853,1.51)); +#235453 = VECTOR('',#235454,1.); +#235454 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#235455 = PLANE('',#235456); +#235456 = AXIS2_PLACEMENT_3D('',#235457,#235458,#235459); +#235457 = CARTESIAN_POINT('',(130.630229,-86.266853,1.51)); +#235458 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#235459 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#235460 = ADVANCED_FACE('',(#235461),#235486,.T.); +#235461 = FACE_BOUND('',#235462,.T.); +#235462 = EDGE_LOOP('',(#235463,#235464,#235472,#235480)); +#235463 = ORIENTED_EDGE('',*,*,#235442,.T.); +#235464 = ORIENTED_EDGE('',*,*,#235465,.T.); +#235465 = EDGE_CURVE('',#235435,#235466,#235468,.T.); +#235466 = VERTEX_POINT('',#235467); +#235467 = CARTESIAN_POINT('',(130.908578,-86.25,1.545)); +#235468 = LINE('',#235469,#235470); +#235469 = CARTESIAN_POINT('',(130.666277,-86.251921,1.545)); +#235470 = VECTOR('',#235471,1.); +#235471 = DIRECTION('',(0.999968573657,7.927906323089E-03,0.)); +#235472 = ORIENTED_EDGE('',*,*,#235473,.F.); +#235473 = EDGE_CURVE('',#235474,#235466,#235476,.T.); +#235474 = VERTEX_POINT('',#235475); +#235475 = CARTESIAN_POINT('',(130.908578,-86.25,1.51)); +#235476 = LINE('',#235477,#235478); +#235477 = CARTESIAN_POINT('',(130.908578,-86.25,1.51)); +#235478 = VECTOR('',#235479,1.); +#235479 = DIRECTION('',(0.,0.,1.)); +#235480 = ORIENTED_EDGE('',*,*,#235481,.F.); +#235481 = EDGE_CURVE('',#235443,#235474,#235482,.T.); +#235482 = LINE('',#235483,#235484); +#235483 = CARTESIAN_POINT('',(130.666277,-86.251921,1.51)); +#235484 = VECTOR('',#235485,1.); +#235485 = DIRECTION('',(0.999968573657,7.927906323089E-03,0.)); +#235486 = PLANE('',#235487); +#235487 = AXIS2_PLACEMENT_3D('',#235488,#235489,#235490); +#235488 = CARTESIAN_POINT('',(130.666277,-86.251921,1.51)); +#235489 = DIRECTION('',(-7.927906323089E-03,0.999968573657,0.)); +#235490 = DIRECTION('',(0.999968573657,7.927906323089E-03,0.)); +#235491 = ADVANCED_FACE('',(#235492),#235517,.T.); +#235492 = FACE_BOUND('',#235493,.T.); +#235493 = EDGE_LOOP('',(#235494,#235495,#235503,#235511)); +#235494 = ORIENTED_EDGE('',*,*,#235473,.T.); +#235495 = ORIENTED_EDGE('',*,*,#235496,.T.); +#235496 = EDGE_CURVE('',#235466,#235497,#235499,.T.); +#235497 = VERTEX_POINT('',#235498); +#235498 = CARTESIAN_POINT('',(133.784442,-83.376853,1.545)); +#235499 = LINE('',#235500,#235501); +#235500 = CARTESIAN_POINT('',(130.908578,-86.25,1.545)); +#235501 = VECTOR('',#235502,1.); +#235502 = DIRECTION('',(0.707440882987,0.706772521451,0.)); +#235503 = ORIENTED_EDGE('',*,*,#235504,.F.); +#235504 = EDGE_CURVE('',#235505,#235497,#235507,.T.); +#235505 = VERTEX_POINT('',#235506); +#235506 = CARTESIAN_POINT('',(133.784442,-83.376853,1.51)); +#235507 = LINE('',#235508,#235509); +#235508 = CARTESIAN_POINT('',(133.784442,-83.376853,1.51)); +#235509 = VECTOR('',#235510,1.); +#235510 = DIRECTION('',(0.,0.,1.)); +#235511 = ORIENTED_EDGE('',*,*,#235512,.F.); +#235512 = EDGE_CURVE('',#235474,#235505,#235513,.T.); +#235513 = LINE('',#235514,#235515); +#235514 = CARTESIAN_POINT('',(130.908578,-86.25,1.51)); +#235515 = VECTOR('',#235516,1.); +#235516 = DIRECTION('',(0.707440882987,0.706772521451,0.)); +#235517 = PLANE('',#235518); +#235518 = AXIS2_PLACEMENT_3D('',#235519,#235520,#235521); +#235519 = CARTESIAN_POINT('',(130.908578,-86.25,1.51)); +#235520 = DIRECTION('',(-0.706772521451,0.707440882987,0.)); +#235521 = DIRECTION('',(0.707440882987,0.706772521451,0.)); +#235522 = ADVANCED_FACE('',(#235523),#235548,.T.); +#235523 = FACE_BOUND('',#235524,.T.); +#235524 = EDGE_LOOP('',(#235525,#235526,#235534,#235542)); +#235525 = ORIENTED_EDGE('',*,*,#235504,.T.); +#235526 = ORIENTED_EDGE('',*,*,#235527,.T.); +#235527 = EDGE_CURVE('',#235497,#235528,#235530,.T.); +#235528 = VERTEX_POINT('',#235529); +#235529 = CARTESIAN_POINT('',(133.820491,-83.361921,1.545)); +#235530 = LINE('',#235531,#235532); +#235531 = CARTESIAN_POINT('',(133.784442,-83.376853,1.545)); +#235532 = VECTOR('',#235533,1.); +#235533 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#235534 = ORIENTED_EDGE('',*,*,#235535,.F.); +#235535 = EDGE_CURVE('',#235536,#235528,#235538,.T.); +#235536 = VERTEX_POINT('',#235537); +#235537 = CARTESIAN_POINT('',(133.820491,-83.361921,1.51)); +#235538 = LINE('',#235539,#235540); +#235539 = CARTESIAN_POINT('',(133.820491,-83.361921,1.51)); +#235540 = VECTOR('',#235541,1.); +#235541 = DIRECTION('',(0.,0.,1.)); +#235542 = ORIENTED_EDGE('',*,*,#235543,.F.); +#235543 = EDGE_CURVE('',#235505,#235536,#235544,.T.); +#235544 = LINE('',#235545,#235546); +#235545 = CARTESIAN_POINT('',(133.784442,-83.376853,1.51)); +#235546 = VECTOR('',#235547,1.); +#235547 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#235548 = PLANE('',#235549); +#235549 = AXIS2_PLACEMENT_3D('',#235550,#235551,#235552); +#235550 = CARTESIAN_POINT('',(133.784442,-83.376853,1.51)); +#235551 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#235552 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#235553 = ADVANCED_FACE('',(#235554),#235579,.T.); +#235554 = FACE_BOUND('',#235555,.T.); +#235555 = EDGE_LOOP('',(#235556,#235557,#235565,#235573)); +#235556 = ORIENTED_EDGE('',*,*,#235535,.T.); +#235557 = ORIENTED_EDGE('',*,*,#235558,.T.); +#235558 = EDGE_CURVE('',#235528,#235559,#235561,.T.); +#235559 = VERTEX_POINT('',#235560); +#235560 = CARTESIAN_POINT('',(134.205,-83.36,1.545)); +#235561 = LINE('',#235562,#235563); +#235562 = CARTESIAN_POINT('',(133.820491,-83.361921,1.545)); +#235563 = VECTOR('',#235564,1.); +#235564 = DIRECTION('',(0.999987520316,4.995919540305E-03,0.)); +#235565 = ORIENTED_EDGE('',*,*,#235566,.F.); +#235566 = EDGE_CURVE('',#235567,#235559,#235569,.T.); +#235567 = VERTEX_POINT('',#235568); +#235568 = CARTESIAN_POINT('',(134.205,-83.36,1.51)); +#235569 = LINE('',#235570,#235571); +#235570 = CARTESIAN_POINT('',(134.205,-83.36,1.51)); +#235571 = VECTOR('',#235572,1.); +#235572 = DIRECTION('',(0.,0.,1.)); +#235573 = ORIENTED_EDGE('',*,*,#235574,.F.); +#235574 = EDGE_CURVE('',#235536,#235567,#235575,.T.); +#235575 = LINE('',#235576,#235577); +#235576 = CARTESIAN_POINT('',(133.820491,-83.361921,1.51)); +#235577 = VECTOR('',#235578,1.); +#235578 = DIRECTION('',(0.999987520316,4.995919540305E-03,0.)); +#235579 = PLANE('',#235580); +#235580 = AXIS2_PLACEMENT_3D('',#235581,#235582,#235583); +#235581 = CARTESIAN_POINT('',(133.820491,-83.361921,1.51)); +#235582 = DIRECTION('',(-4.995919540305E-03,0.999987520316,0.)); +#235583 = DIRECTION('',(0.999987520316,4.995919540305E-03,0.)); +#235584 = ADVANCED_FACE('',(#235585),#235601,.T.); +#235585 = FACE_BOUND('',#235586,.T.); +#235586 = EDGE_LOOP('',(#235587,#235588,#235594,#235595)); +#235587 = ORIENTED_EDGE('',*,*,#235566,.T.); +#235588 = ORIENTED_EDGE('',*,*,#235589,.T.); +#235589 = EDGE_CURVE('',#235559,#233900,#235590,.T.); +#235590 = LINE('',#235591,#235592); +#235591 = CARTESIAN_POINT('',(134.205,-83.36,1.545)); +#235592 = VECTOR('',#235593,1.); +#235593 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#235594 = ORIENTED_EDGE('',*,*,#233897,.F.); +#235595 = ORIENTED_EDGE('',*,*,#235596,.F.); +#235596 = EDGE_CURVE('',#235567,#233898,#235597,.T.); +#235597 = LINE('',#235598,#235599); +#235598 = CARTESIAN_POINT('',(134.205,-83.36,1.51)); +#235599 = VECTOR('',#235600,1.); +#235600 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#235601 = PLANE('',#235602); +#235602 = AXIS2_PLACEMENT_3D('',#235603,#235604,#235605); +#235603 = CARTESIAN_POINT('',(134.205,-83.36,1.51)); +#235604 = DIRECTION('',(-0.999998037002,1.981411445446E-03,0.)); +#235605 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#235606 = ADVANCED_FACE('',(#235607),#235664,.F.); +#235607 = FACE_BOUND('',#235608,.T.); +#235608 = EDGE_LOOP('',(#235609,#235610,#235611,#235612,#235613,#235614, + #235615,#235616,#235617,#235618,#235619,#235620,#235621,#235622, + #235623,#235624,#235625,#235626,#235627,#235628,#235629,#235630, + #235631,#235632,#235633,#235634,#235635,#235636,#235637,#235638, + #235639,#235640,#235641,#235642,#235643,#235644,#235645,#235646, + #235647,#235648,#235649,#235650,#235651,#235652,#235653,#235654, + #235655,#235656,#235657,#235658,#235659,#235660,#235661,#235662, + #235663)); +#235609 = ORIENTED_EDGE('',*,*,#233924,.T.); +#235610 = ORIENTED_EDGE('',*,*,#233956,.T.); +#235611 = ORIENTED_EDGE('',*,*,#233988,.T.); +#235612 = ORIENTED_EDGE('',*,*,#234020,.T.); +#235613 = ORIENTED_EDGE('',*,*,#234051,.T.); +#235614 = ORIENTED_EDGE('',*,*,#234083,.T.); +#235615 = ORIENTED_EDGE('',*,*,#234115,.T.); +#235616 = ORIENTED_EDGE('',*,*,#234146,.T.); +#235617 = ORIENTED_EDGE('',*,*,#234177,.T.); +#235618 = ORIENTED_EDGE('',*,*,#234208,.T.); +#235619 = ORIENTED_EDGE('',*,*,#234239,.T.); +#235620 = ORIENTED_EDGE('',*,*,#234270,.T.); +#235621 = ORIENTED_EDGE('',*,*,#234301,.T.); +#235622 = ORIENTED_EDGE('',*,*,#234332,.T.); +#235623 = ORIENTED_EDGE('',*,*,#234363,.T.); +#235624 = ORIENTED_EDGE('',*,*,#234394,.T.); +#235625 = ORIENTED_EDGE('',*,*,#234425,.T.); +#235626 = ORIENTED_EDGE('',*,*,#234456,.T.); +#235627 = ORIENTED_EDGE('',*,*,#234487,.T.); +#235628 = ORIENTED_EDGE('',*,*,#234518,.T.); +#235629 = ORIENTED_EDGE('',*,*,#234549,.T.); +#235630 = ORIENTED_EDGE('',*,*,#234580,.T.); +#235631 = ORIENTED_EDGE('',*,*,#234611,.T.); +#235632 = ORIENTED_EDGE('',*,*,#234642,.T.); +#235633 = ORIENTED_EDGE('',*,*,#234673,.T.); +#235634 = ORIENTED_EDGE('',*,*,#234704,.T.); +#235635 = ORIENTED_EDGE('',*,*,#234735,.T.); +#235636 = ORIENTED_EDGE('',*,*,#234766,.T.); +#235637 = ORIENTED_EDGE('',*,*,#234798,.T.); +#235638 = ORIENTED_EDGE('',*,*,#234830,.T.); +#235639 = ORIENTED_EDGE('',*,*,#234861,.T.); +#235640 = ORIENTED_EDGE('',*,*,#234892,.T.); +#235641 = ORIENTED_EDGE('',*,*,#234923,.T.); +#235642 = ORIENTED_EDGE('',*,*,#234954,.T.); +#235643 = ORIENTED_EDGE('',*,*,#234985,.T.); +#235644 = ORIENTED_EDGE('',*,*,#235016,.T.); +#235645 = ORIENTED_EDGE('',*,*,#235047,.T.); +#235646 = ORIENTED_EDGE('',*,*,#235078,.T.); +#235647 = ORIENTED_EDGE('',*,*,#235109,.T.); +#235648 = ORIENTED_EDGE('',*,*,#235140,.T.); +#235649 = ORIENTED_EDGE('',*,*,#235171,.T.); +#235650 = ORIENTED_EDGE('',*,*,#235202,.T.); +#235651 = ORIENTED_EDGE('',*,*,#235233,.T.); +#235652 = ORIENTED_EDGE('',*,*,#235264,.T.); +#235653 = ORIENTED_EDGE('',*,*,#235295,.T.); +#235654 = ORIENTED_EDGE('',*,*,#235326,.T.); +#235655 = ORIENTED_EDGE('',*,*,#235357,.T.); +#235656 = ORIENTED_EDGE('',*,*,#235388,.T.); +#235657 = ORIENTED_EDGE('',*,*,#235419,.T.); +#235658 = ORIENTED_EDGE('',*,*,#235450,.T.); +#235659 = ORIENTED_EDGE('',*,*,#235481,.T.); +#235660 = ORIENTED_EDGE('',*,*,#235512,.T.); +#235661 = ORIENTED_EDGE('',*,*,#235543,.T.); +#235662 = ORIENTED_EDGE('',*,*,#235574,.T.); +#235663 = ORIENTED_EDGE('',*,*,#235596,.T.); +#235664 = PLANE('',#235665); +#235665 = AXIS2_PLACEMENT_3D('',#235666,#235667,#235668); +#235666 = CARTESIAN_POINT('',(0.,0.,1.51)); +#235667 = DIRECTION('',(0.,0.,1.)); +#235668 = DIRECTION('',(1.,0.,-0.)); +#235669 = ADVANCED_FACE('',(#235670),#235727,.T.); +#235670 = FACE_BOUND('',#235671,.F.); +#235671 = EDGE_LOOP('',(#235672,#235673,#235674,#235675,#235676,#235677, + #235678,#235679,#235680,#235681,#235682,#235683,#235684,#235685, + #235686,#235687,#235688,#235689,#235690,#235691,#235692,#235693, + #235694,#235695,#235696,#235697,#235698,#235699,#235700,#235701, + #235702,#235703,#235704,#235705,#235706,#235707,#235708,#235709, + #235710,#235711,#235712,#235713,#235714,#235715,#235716,#235717, + #235718,#235719,#235720,#235721,#235722,#235723,#235724,#235725, + #235726)); +#235672 = ORIENTED_EDGE('',*,*,#233907,.T.); +#235673 = ORIENTED_EDGE('',*,*,#233940,.T.); +#235674 = ORIENTED_EDGE('',*,*,#233971,.T.); +#235675 = ORIENTED_EDGE('',*,*,#234004,.T.); +#235676 = ORIENTED_EDGE('',*,*,#234035,.T.); +#235677 = ORIENTED_EDGE('',*,*,#234066,.T.); +#235678 = ORIENTED_EDGE('',*,*,#234099,.T.); +#235679 = ORIENTED_EDGE('',*,*,#234130,.T.); +#235680 = ORIENTED_EDGE('',*,*,#234161,.T.); +#235681 = ORIENTED_EDGE('',*,*,#234192,.T.); +#235682 = ORIENTED_EDGE('',*,*,#234223,.T.); +#235683 = ORIENTED_EDGE('',*,*,#234254,.T.); +#235684 = ORIENTED_EDGE('',*,*,#234285,.T.); +#235685 = ORIENTED_EDGE('',*,*,#234316,.T.); +#235686 = ORIENTED_EDGE('',*,*,#234347,.T.); +#235687 = ORIENTED_EDGE('',*,*,#234378,.T.); +#235688 = ORIENTED_EDGE('',*,*,#234409,.T.); +#235689 = ORIENTED_EDGE('',*,*,#234440,.T.); +#235690 = ORIENTED_EDGE('',*,*,#234471,.T.); +#235691 = ORIENTED_EDGE('',*,*,#234502,.T.); +#235692 = ORIENTED_EDGE('',*,*,#234533,.T.); +#235693 = ORIENTED_EDGE('',*,*,#234564,.T.); +#235694 = ORIENTED_EDGE('',*,*,#234595,.T.); +#235695 = ORIENTED_EDGE('',*,*,#234626,.T.); +#235696 = ORIENTED_EDGE('',*,*,#234657,.T.); +#235697 = ORIENTED_EDGE('',*,*,#234688,.T.); +#235698 = ORIENTED_EDGE('',*,*,#234719,.T.); +#235699 = ORIENTED_EDGE('',*,*,#234750,.T.); +#235700 = ORIENTED_EDGE('',*,*,#234781,.T.); +#235701 = ORIENTED_EDGE('',*,*,#234814,.T.); +#235702 = ORIENTED_EDGE('',*,*,#234845,.T.); +#235703 = ORIENTED_EDGE('',*,*,#234876,.T.); +#235704 = ORIENTED_EDGE('',*,*,#234907,.T.); +#235705 = ORIENTED_EDGE('',*,*,#234938,.T.); +#235706 = ORIENTED_EDGE('',*,*,#234969,.T.); +#235707 = ORIENTED_EDGE('',*,*,#235000,.T.); +#235708 = ORIENTED_EDGE('',*,*,#235031,.T.); +#235709 = ORIENTED_EDGE('',*,*,#235062,.T.); +#235710 = ORIENTED_EDGE('',*,*,#235093,.T.); +#235711 = ORIENTED_EDGE('',*,*,#235124,.T.); +#235712 = ORIENTED_EDGE('',*,*,#235155,.T.); +#235713 = ORIENTED_EDGE('',*,*,#235186,.T.); +#235714 = ORIENTED_EDGE('',*,*,#235217,.T.); +#235715 = ORIENTED_EDGE('',*,*,#235248,.T.); +#235716 = ORIENTED_EDGE('',*,*,#235279,.T.); +#235717 = ORIENTED_EDGE('',*,*,#235310,.T.); +#235718 = ORIENTED_EDGE('',*,*,#235341,.T.); +#235719 = ORIENTED_EDGE('',*,*,#235372,.T.); +#235720 = ORIENTED_EDGE('',*,*,#235403,.T.); +#235721 = ORIENTED_EDGE('',*,*,#235434,.T.); +#235722 = ORIENTED_EDGE('',*,*,#235465,.T.); +#235723 = ORIENTED_EDGE('',*,*,#235496,.T.); +#235724 = ORIENTED_EDGE('',*,*,#235527,.T.); +#235725 = ORIENTED_EDGE('',*,*,#235558,.T.); +#235726 = ORIENTED_EDGE('',*,*,#235589,.T.); +#235727 = PLANE('',#235728); +#235728 = AXIS2_PLACEMENT_3D('',#235729,#235730,#235731); +#235729 = CARTESIAN_POINT('',(0.,0.,1.545)); +#235730 = DIRECTION('',(0.,0.,1.)); +#235731 = DIRECTION('',(1.,0.,-0.)); +#235732 = MANIFOLD_SOLID_BREP('',#235733); +#235733 = CLOSED_SHELL('',(#235734,#235774,#235805,#235836,#235867, + #235898,#235929,#235960,#235991,#236022,#236053,#236084,#236115, + #236146,#236179,#236210,#236241,#236272,#236303,#236334,#236365, + #236396,#236427,#236458,#236489,#236520,#236551,#236582,#236615, + #236637,#236670,#236703,#236746)); +#235734 = ADVANCED_FACE('',(#235735),#235769,.T.); +#235735 = FACE_BOUND('',#235736,.T.); +#235736 = EDGE_LOOP('',(#235737,#235747,#235755,#235763)); +#235737 = ORIENTED_EDGE('',*,*,#235738,.T.); +#235738 = EDGE_CURVE('',#235739,#235741,#235743,.T.); +#235739 = VERTEX_POINT('',#235740); +#235740 = CARTESIAN_POINT('',(127.971921,-103.9695,1.51)); +#235741 = VERTEX_POINT('',#235742); +#235742 = CARTESIAN_POINT('',(127.971921,-103.9695,1.545)); +#235743 = LINE('',#235744,#235745); +#235744 = CARTESIAN_POINT('',(127.971921,-103.9695,1.51)); +#235745 = VECTOR('',#235746,1.); +#235746 = DIRECTION('',(0.,0.,1.)); +#235747 = ORIENTED_EDGE('',*,*,#235748,.T.); +#235748 = EDGE_CURVE('',#235741,#235749,#235751,.T.); +#235749 = VERTEX_POINT('',#235750); +#235750 = CARTESIAN_POINT('',(127.5,-104.441421,1.545)); +#235751 = LINE('',#235752,#235753); +#235752 = CARTESIAN_POINT('',(127.971921,-103.9695,1.545)); +#235753 = VECTOR('',#235754,1.); +#235754 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#235755 = ORIENTED_EDGE('',*,*,#235756,.F.); +#235756 = EDGE_CURVE('',#235757,#235749,#235759,.T.); +#235757 = VERTEX_POINT('',#235758); +#235758 = CARTESIAN_POINT('',(127.5,-104.441421,1.51)); +#235759 = LINE('',#235760,#235761); +#235760 = CARTESIAN_POINT('',(127.5,-104.441421,1.51)); +#235761 = VECTOR('',#235762,1.); +#235762 = DIRECTION('',(0.,0.,1.)); +#235763 = ORIENTED_EDGE('',*,*,#235764,.F.); +#235764 = EDGE_CURVE('',#235739,#235757,#235765,.T.); +#235765 = LINE('',#235766,#235767); +#235766 = CARTESIAN_POINT('',(127.971921,-103.9695,1.51)); +#235767 = VECTOR('',#235768,1.); +#235768 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#235769 = PLANE('',#235770); +#235770 = AXIS2_PLACEMENT_3D('',#235771,#235772,#235773); +#235771 = CARTESIAN_POINT('',(127.971921,-103.9695,1.51)); +#235772 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#235773 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#235774 = ADVANCED_FACE('',(#235775),#235800,.T.); +#235775 = FACE_BOUND('',#235776,.T.); +#235776 = EDGE_LOOP('',(#235777,#235778,#235786,#235794)); +#235777 = ORIENTED_EDGE('',*,*,#235756,.T.); +#235778 = ORIENTED_EDGE('',*,*,#235779,.T.); +#235779 = EDGE_CURVE('',#235749,#235780,#235782,.T.); +#235780 = VERTEX_POINT('',#235781); +#235781 = CARTESIAN_POINT('',(127.5,-114.010049,1.545)); +#235782 = LINE('',#235783,#235784); +#235783 = CARTESIAN_POINT('',(127.5,-104.441421,1.545)); +#235784 = VECTOR('',#235785,1.); +#235785 = DIRECTION('',(0.,-1.,0.)); +#235786 = ORIENTED_EDGE('',*,*,#235787,.F.); +#235787 = EDGE_CURVE('',#235788,#235780,#235790,.T.); +#235788 = VERTEX_POINT('',#235789); +#235789 = CARTESIAN_POINT('',(127.5,-114.010049,1.51)); +#235790 = LINE('',#235791,#235792); +#235791 = CARTESIAN_POINT('',(127.5,-114.010049,1.51)); +#235792 = VECTOR('',#235793,1.); +#235793 = DIRECTION('',(0.,0.,1.)); +#235794 = ORIENTED_EDGE('',*,*,#235795,.F.); +#235795 = EDGE_CURVE('',#235757,#235788,#235796,.T.); +#235796 = LINE('',#235797,#235798); +#235797 = CARTESIAN_POINT('',(127.5,-104.441421,1.51)); +#235798 = VECTOR('',#235799,1.); +#235799 = DIRECTION('',(0.,-1.,0.)); +#235800 = PLANE('',#235801); +#235801 = AXIS2_PLACEMENT_3D('',#235802,#235803,#235804); +#235802 = CARTESIAN_POINT('',(127.5,-104.441421,1.51)); +#235803 = DIRECTION('',(1.,0.,-0.)); +#235804 = DIRECTION('',(0.,-1.,0.)); +#235805 = ADVANCED_FACE('',(#235806),#235831,.T.); +#235806 = FACE_BOUND('',#235807,.T.); +#235807 = EDGE_LOOP('',(#235808,#235809,#235817,#235825)); +#235808 = ORIENTED_EDGE('',*,*,#235787,.T.); +#235809 = ORIENTED_EDGE('',*,*,#235810,.T.); +#235810 = EDGE_CURVE('',#235780,#235811,#235813,.T.); +#235811 = VERTEX_POINT('',#235812); +#235812 = CARTESIAN_POINT('',(129.683147,-116.195914,1.545)); +#235813 = LINE('',#235814,#235815); +#235814 = CARTESIAN_POINT('',(127.5,-114.010049,1.545)); +#235815 = VECTOR('',#235816,1.); +#235816 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#235817 = ORIENTED_EDGE('',*,*,#235818,.F.); +#235818 = EDGE_CURVE('',#235819,#235811,#235821,.T.); +#235819 = VERTEX_POINT('',#235820); +#235820 = CARTESIAN_POINT('',(129.683147,-116.195914,1.51)); +#235821 = LINE('',#235822,#235823); +#235822 = CARTESIAN_POINT('',(129.683147,-116.195914,1.51)); +#235823 = VECTOR('',#235824,1.); +#235824 = DIRECTION('',(0.,0.,1.)); +#235825 = ORIENTED_EDGE('',*,*,#235826,.F.); +#235826 = EDGE_CURVE('',#235788,#235819,#235827,.T.); +#235827 = LINE('',#235828,#235829); +#235828 = CARTESIAN_POINT('',(127.5,-114.010049,1.51)); +#235829 = VECTOR('',#235830,1.); +#235830 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#235831 = PLANE('',#235832); +#235832 = AXIS2_PLACEMENT_3D('',#235833,#235834,#235835); +#235833 = CARTESIAN_POINT('',(127.5,-114.010049,1.51)); +#235834 = DIRECTION('',(0.707546541489,0.70666674722,-0.)); +#235835 = DIRECTION('',(0.70666674722,-0.707546541489,0.)); +#235836 = ADVANCED_FACE('',(#235837),#235862,.T.); +#235837 = FACE_BOUND('',#235838,.T.); +#235838 = EDGE_LOOP('',(#235839,#235840,#235848,#235856)); +#235839 = ORIENTED_EDGE('',*,*,#235818,.T.); +#235840 = ORIENTED_EDGE('',*,*,#235841,.T.); +#235841 = EDGE_CURVE('',#235811,#235842,#235844,.T.); +#235842 = VERTEX_POINT('',#235843); +#235843 = CARTESIAN_POINT('',(129.698079,-116.231962,1.545)); +#235844 = LINE('',#235845,#235846); +#235845 = CARTESIAN_POINT('',(129.683147,-116.195914,1.545)); +#235846 = VECTOR('',#235847,1.); +#235847 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#235848 = ORIENTED_EDGE('',*,*,#235849,.F.); +#235849 = EDGE_CURVE('',#235850,#235842,#235852,.T.); +#235850 = VERTEX_POINT('',#235851); +#235851 = CARTESIAN_POINT('',(129.698079,-116.231962,1.51)); +#235852 = LINE('',#235853,#235854); +#235853 = CARTESIAN_POINT('',(129.698079,-116.231962,1.51)); +#235854 = VECTOR('',#235855,1.); +#235855 = DIRECTION('',(0.,0.,1.)); +#235856 = ORIENTED_EDGE('',*,*,#235857,.F.); +#235857 = EDGE_CURVE('',#235819,#235850,#235858,.T.); +#235858 = LINE('',#235859,#235860); +#235859 = CARTESIAN_POINT('',(129.683147,-116.195914,1.51)); +#235860 = VECTOR('',#235861,1.); +#235861 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#235862 = PLANE('',#235863); +#235863 = AXIS2_PLACEMENT_3D('',#235864,#235865,#235866); +#235864 = CARTESIAN_POINT('',(129.683147,-116.195914,1.51)); +#235865 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#235866 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#235867 = ADVANCED_FACE('',(#235868),#235893,.T.); +#235868 = FACE_BOUND('',#235869,.T.); +#235869 = EDGE_LOOP('',(#235870,#235871,#235879,#235887)); +#235870 = ORIENTED_EDGE('',*,*,#235849,.T.); +#235871 = ORIENTED_EDGE('',*,*,#235872,.T.); +#235872 = EDGE_CURVE('',#235842,#235873,#235875,.T.); +#235873 = VERTEX_POINT('',#235874); +#235874 = CARTESIAN_POINT('',(129.698079,-117.319509,1.545)); +#235875 = LINE('',#235876,#235877); +#235876 = CARTESIAN_POINT('',(129.698079,-116.231962,1.545)); +#235877 = VECTOR('',#235878,1.); +#235878 = DIRECTION('',(0.,-1.,0.)); +#235879 = ORIENTED_EDGE('',*,*,#235880,.F.); +#235880 = EDGE_CURVE('',#235881,#235873,#235883,.T.); +#235881 = VERTEX_POINT('',#235882); +#235882 = CARTESIAN_POINT('',(129.698079,-117.319509,1.51)); +#235883 = LINE('',#235884,#235885); +#235884 = CARTESIAN_POINT('',(129.698079,-117.319509,1.51)); +#235885 = VECTOR('',#235886,1.); +#235886 = DIRECTION('',(0.,0.,1.)); +#235887 = ORIENTED_EDGE('',*,*,#235888,.F.); +#235888 = EDGE_CURVE('',#235850,#235881,#235889,.T.); +#235889 = LINE('',#235890,#235891); +#235890 = CARTESIAN_POINT('',(129.698079,-116.231962,1.51)); +#235891 = VECTOR('',#235892,1.); +#235892 = DIRECTION('',(0.,-1.,0.)); +#235893 = PLANE('',#235894); +#235894 = AXIS2_PLACEMENT_3D('',#235895,#235896,#235897); +#235895 = CARTESIAN_POINT('',(129.698079,-116.231962,1.51)); +#235896 = DIRECTION('',(1.,0.,-0.)); +#235897 = DIRECTION('',(0.,-1.,0.)); +#235898 = ADVANCED_FACE('',(#235899),#235924,.T.); +#235899 = FACE_BOUND('',#235900,.T.); +#235900 = EDGE_LOOP('',(#235901,#235902,#235910,#235918)); +#235901 = ORIENTED_EDGE('',*,*,#235880,.T.); +#235902 = ORIENTED_EDGE('',*,*,#235903,.T.); +#235903 = EDGE_CURVE('',#235873,#235904,#235906,.T.); +#235904 = VERTEX_POINT('',#235905); +#235905 = CARTESIAN_POINT('',(129.683147,-117.355558,1.545)); +#235906 = LINE('',#235907,#235908); +#235907 = CARTESIAN_POINT('',(129.698079,-117.319509,1.545)); +#235908 = VECTOR('',#235909,1.); +#235909 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#235910 = ORIENTED_EDGE('',*,*,#235911,.F.); +#235911 = EDGE_CURVE('',#235912,#235904,#235914,.T.); +#235912 = VERTEX_POINT('',#235913); +#235913 = CARTESIAN_POINT('',(129.683147,-117.355558,1.51)); +#235914 = LINE('',#235915,#235916); +#235915 = CARTESIAN_POINT('',(129.683147,-117.355558,1.51)); +#235916 = VECTOR('',#235917,1.); +#235917 = DIRECTION('',(0.,0.,1.)); +#235918 = ORIENTED_EDGE('',*,*,#235919,.F.); +#235919 = EDGE_CURVE('',#235881,#235912,#235920,.T.); +#235920 = LINE('',#235921,#235922); +#235921 = CARTESIAN_POINT('',(129.698079,-117.319509,1.51)); +#235922 = VECTOR('',#235923,1.); +#235923 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#235924 = PLANE('',#235925); +#235925 = AXIS2_PLACEMENT_3D('',#235926,#235927,#235928); +#235926 = CARTESIAN_POINT('',(129.698079,-117.319509,1.51)); +#235927 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#235928 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#235929 = ADVANCED_FACE('',(#235930),#235955,.T.); +#235930 = FACE_BOUND('',#235931,.T.); +#235931 = EDGE_LOOP('',(#235932,#235933,#235941,#235949)); +#235932 = ORIENTED_EDGE('',*,*,#235911,.T.); +#235933 = ORIENTED_EDGE('',*,*,#235934,.T.); +#235934 = EDGE_CURVE('',#235904,#235935,#235937,.T.); +#235935 = VERTEX_POINT('',#235936); +#235936 = CARTESIAN_POINT('',(128.155557,-118.883147,1.545)); +#235937 = LINE('',#235938,#235939); +#235938 = CARTESIAN_POINT('',(129.683147,-117.355558,1.545)); +#235939 = VECTOR('',#235940,1.); +#235940 = DIRECTION('',(-0.707107012632,-0.707106549741,0.)); +#235941 = ORIENTED_EDGE('',*,*,#235942,.F.); +#235942 = EDGE_CURVE('',#235943,#235935,#235945,.T.); +#235943 = VERTEX_POINT('',#235944); +#235944 = CARTESIAN_POINT('',(128.155557,-118.883147,1.51)); +#235945 = LINE('',#235946,#235947); +#235946 = CARTESIAN_POINT('',(128.155557,-118.883147,1.51)); +#235947 = VECTOR('',#235948,1.); +#235948 = DIRECTION('',(0.,0.,1.)); +#235949 = ORIENTED_EDGE('',*,*,#235950,.F.); +#235950 = EDGE_CURVE('',#235912,#235943,#235951,.T.); +#235951 = LINE('',#235952,#235953); +#235952 = CARTESIAN_POINT('',(129.683147,-117.355558,1.51)); +#235953 = VECTOR('',#235954,1.); +#235954 = DIRECTION('',(-0.707107012632,-0.707106549741,0.)); +#235955 = PLANE('',#235956); +#235956 = AXIS2_PLACEMENT_3D('',#235957,#235958,#235959); +#235957 = CARTESIAN_POINT('',(129.683147,-117.355558,1.51)); +#235958 = DIRECTION('',(0.707106549741,-0.707107012632,0.)); +#235959 = DIRECTION('',(-0.707107012632,-0.707106549741,0.)); +#235960 = ADVANCED_FACE('',(#235961),#235986,.T.); +#235961 = FACE_BOUND('',#235962,.T.); +#235962 = EDGE_LOOP('',(#235963,#235964,#235972,#235980)); +#235963 = ORIENTED_EDGE('',*,*,#235942,.T.); +#235964 = ORIENTED_EDGE('',*,*,#235965,.T.); +#235965 = EDGE_CURVE('',#235935,#235966,#235968,.T.); +#235966 = VERTEX_POINT('',#235967); +#235967 = CARTESIAN_POINT('',(128.119509,-118.898079,1.545)); +#235968 = LINE('',#235969,#235970); +#235969 = CARTESIAN_POINT('',(128.155557,-118.883147,1.545)); +#235970 = VECTOR('',#235971,1.); +#235971 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#235972 = ORIENTED_EDGE('',*,*,#235973,.F.); +#235973 = EDGE_CURVE('',#235974,#235966,#235976,.T.); +#235974 = VERTEX_POINT('',#235975); +#235975 = CARTESIAN_POINT('',(128.119509,-118.898079,1.51)); +#235976 = LINE('',#235977,#235978); +#235977 = CARTESIAN_POINT('',(128.119509,-118.898079,1.51)); +#235978 = VECTOR('',#235979,1.); +#235979 = DIRECTION('',(0.,0.,1.)); +#235980 = ORIENTED_EDGE('',*,*,#235981,.F.); +#235981 = EDGE_CURVE('',#235943,#235974,#235982,.T.); +#235982 = LINE('',#235983,#235984); +#235983 = CARTESIAN_POINT('',(128.155557,-118.883147,1.51)); +#235984 = VECTOR('',#235985,1.); +#235985 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#235986 = PLANE('',#235987); +#235987 = AXIS2_PLACEMENT_3D('',#235988,#235989,#235990); +#235988 = CARTESIAN_POINT('',(128.155557,-118.883147,1.51)); +#235989 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#235990 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#235991 = ADVANCED_FACE('',(#235992),#236017,.T.); +#235992 = FACE_BOUND('',#235993,.T.); +#235993 = EDGE_LOOP('',(#235994,#235995,#236003,#236011)); +#235994 = ORIENTED_EDGE('',*,*,#235973,.T.); +#235995 = ORIENTED_EDGE('',*,*,#235996,.T.); +#235996 = EDGE_CURVE('',#235966,#235997,#235999,.T.); +#235997 = VERTEX_POINT('',#235998); +#235998 = CARTESIAN_POINT('',(127.941422,-118.9,1.545)); +#235999 = LINE('',#236000,#236001); +#236000 = CARTESIAN_POINT('',(128.119509,-118.898079,1.545)); +#236001 = VECTOR('',#236002,1.); +#236002 = DIRECTION('',(-0.999941826874,-1.078623509541E-02,0.)); +#236003 = ORIENTED_EDGE('',*,*,#236004,.F.); +#236004 = EDGE_CURVE('',#236005,#235997,#236007,.T.); +#236005 = VERTEX_POINT('',#236006); +#236006 = CARTESIAN_POINT('',(127.941422,-118.9,1.51)); +#236007 = LINE('',#236008,#236009); +#236008 = CARTESIAN_POINT('',(127.941422,-118.9,1.51)); +#236009 = VECTOR('',#236010,1.); +#236010 = DIRECTION('',(0.,0.,1.)); +#236011 = ORIENTED_EDGE('',*,*,#236012,.F.); +#236012 = EDGE_CURVE('',#235974,#236005,#236013,.T.); +#236013 = LINE('',#236014,#236015); +#236014 = CARTESIAN_POINT('',(128.119509,-118.898079,1.51)); +#236015 = VECTOR('',#236016,1.); +#236016 = DIRECTION('',(-0.999941826874,-1.078623509541E-02,0.)); +#236017 = PLANE('',#236018); +#236018 = AXIS2_PLACEMENT_3D('',#236019,#236020,#236021); +#236019 = CARTESIAN_POINT('',(128.119509,-118.898079,1.51)); +#236020 = DIRECTION('',(1.078623509541E-02,-0.999941826874,0.)); +#236021 = DIRECTION('',(-0.999941826874,-1.078623509541E-02,0.)); +#236022 = ADVANCED_FACE('',(#236023),#236048,.T.); +#236023 = FACE_BOUND('',#236024,.T.); +#236024 = EDGE_LOOP('',(#236025,#236026,#236034,#236042)); +#236025 = ORIENTED_EDGE('',*,*,#236004,.T.); +#236026 = ORIENTED_EDGE('',*,*,#236027,.T.); +#236027 = EDGE_CURVE('',#235997,#236028,#236030,.T.); +#236028 = VERTEX_POINT('',#236029); +#236029 = CARTESIAN_POINT('',(127.031292,-119.807412,1.545)); +#236030 = LINE('',#236031,#236032); +#236031 = CARTESIAN_POINT('',(127.941422,-118.9,1.545)); +#236032 = VECTOR('',#236033,1.); +#236033 = DIRECTION('',(-0.70816341539,-0.706048565683,0.)); +#236034 = ORIENTED_EDGE('',*,*,#236035,.F.); +#236035 = EDGE_CURVE('',#236036,#236028,#236038,.T.); +#236036 = VERTEX_POINT('',#236037); +#236037 = CARTESIAN_POINT('',(127.031292,-119.807412,1.51)); +#236038 = LINE('',#236039,#236040); +#236039 = CARTESIAN_POINT('',(127.031292,-119.807412,1.51)); +#236040 = VECTOR('',#236041,1.); +#236041 = DIRECTION('',(0.,0.,1.)); +#236042 = ORIENTED_EDGE('',*,*,#236043,.F.); +#236043 = EDGE_CURVE('',#236005,#236036,#236044,.T.); +#236044 = LINE('',#236045,#236046); +#236045 = CARTESIAN_POINT('',(127.941422,-118.9,1.51)); +#236046 = VECTOR('',#236047,1.); +#236047 = DIRECTION('',(-0.70816341539,-0.706048565683,0.)); +#236048 = PLANE('',#236049); +#236049 = AXIS2_PLACEMENT_3D('',#236050,#236051,#236052); +#236050 = CARTESIAN_POINT('',(127.941422,-118.9,1.51)); +#236051 = DIRECTION('',(0.706048565683,-0.70816341539,0.)); +#236052 = DIRECTION('',(-0.70816341539,-0.706048565683,0.)); +#236053 = ADVANCED_FACE('',(#236054),#236079,.T.); +#236054 = FACE_BOUND('',#236055,.T.); +#236055 = EDGE_LOOP('',(#236056,#236057,#236065,#236073)); +#236056 = ORIENTED_EDGE('',*,*,#236035,.T.); +#236057 = ORIENTED_EDGE('',*,*,#236058,.T.); +#236058 = EDGE_CURVE('',#236028,#236059,#236061,.T.); +#236059 = VERTEX_POINT('',#236060); +#236060 = CARTESIAN_POINT('',(126.995244,-119.822344,1.545)); +#236061 = LINE('',#236062,#236063); +#236062 = CARTESIAN_POINT('',(127.031292,-119.807412,1.545)); +#236063 = VECTOR('',#236064,1.); +#236064 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#236065 = ORIENTED_EDGE('',*,*,#236066,.F.); +#236066 = EDGE_CURVE('',#236067,#236059,#236069,.T.); +#236067 = VERTEX_POINT('',#236068); +#236068 = CARTESIAN_POINT('',(126.995244,-119.822344,1.51)); +#236069 = LINE('',#236070,#236071); +#236070 = CARTESIAN_POINT('',(126.995244,-119.822344,1.51)); +#236071 = VECTOR('',#236072,1.); +#236072 = DIRECTION('',(0.,0.,1.)); +#236073 = ORIENTED_EDGE('',*,*,#236074,.F.); +#236074 = EDGE_CURVE('',#236036,#236067,#236075,.T.); +#236075 = LINE('',#236076,#236077); +#236076 = CARTESIAN_POINT('',(127.031292,-119.807412,1.51)); +#236077 = VECTOR('',#236078,1.); +#236078 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#236079 = PLANE('',#236080); +#236080 = AXIS2_PLACEMENT_3D('',#236081,#236082,#236083); +#236081 = CARTESIAN_POINT('',(127.031292,-119.807412,1.51)); +#236082 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#236083 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#236084 = ADVANCED_FACE('',(#236085),#236110,.T.); +#236085 = FACE_BOUND('',#236086,.T.); +#236086 = EDGE_LOOP('',(#236087,#236088,#236096,#236104)); +#236087 = ORIENTED_EDGE('',*,*,#236066,.T.); +#236088 = ORIENTED_EDGE('',*,*,#236089,.T.); +#236089 = EDGE_CURVE('',#236059,#236090,#236092,.T.); +#236090 = VERTEX_POINT('',#236091); +#236091 = CARTESIAN_POINT('',(126.905396,-119.824265,1.545)); +#236092 = LINE('',#236093,#236094); +#236093 = CARTESIAN_POINT('',(126.995244,-119.822344,1.545)); +#236094 = VECTOR('',#236095,1.); +#236095 = DIRECTION('',(-0.999771514292,-2.13756686732E-02,0.)); +#236096 = ORIENTED_EDGE('',*,*,#236097,.F.); +#236097 = EDGE_CURVE('',#236098,#236090,#236100,.T.); +#236098 = VERTEX_POINT('',#236099); +#236099 = CARTESIAN_POINT('',(126.905396,-119.824265,1.51)); +#236100 = LINE('',#236101,#236102); +#236101 = CARTESIAN_POINT('',(126.905396,-119.824265,1.51)); +#236102 = VECTOR('',#236103,1.); +#236103 = DIRECTION('',(0.,0.,1.)); +#236104 = ORIENTED_EDGE('',*,*,#236105,.F.); +#236105 = EDGE_CURVE('',#236067,#236098,#236106,.T.); +#236106 = LINE('',#236107,#236108); +#236107 = CARTESIAN_POINT('',(126.995244,-119.822344,1.51)); +#236108 = VECTOR('',#236109,1.); +#236109 = DIRECTION('',(-0.999771514292,-2.13756686732E-02,0.)); +#236110 = PLANE('',#236111); +#236111 = AXIS2_PLACEMENT_3D('',#236112,#236113,#236114); +#236112 = CARTESIAN_POINT('',(126.995244,-119.822344,1.51)); +#236113 = DIRECTION('',(2.13756686732E-02,-0.999771514292,0.)); +#236114 = DIRECTION('',(-0.999771514292,-2.13756686732E-02,0.)); +#236115 = ADVANCED_FACE('',(#236116),#236141,.T.); +#236116 = FACE_BOUND('',#236117,.T.); +#236117 = EDGE_LOOP('',(#236118,#236119,#236127,#236135)); +#236118 = ORIENTED_EDGE('',*,*,#236097,.T.); +#236119 = ORIENTED_EDGE('',*,*,#236120,.T.); +#236120 = EDGE_CURVE('',#236090,#236121,#236123,.T.); +#236121 = VERTEX_POINT('',#236122); +#236122 = CARTESIAN_POINT('',(126.901429,-119.83907,1.545)); +#236123 = LINE('',#236124,#236125); +#236124 = CARTESIAN_POINT('',(126.905396,-119.824265,1.545)); +#236125 = VECTOR('',#236126,1.); +#236126 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#236127 = ORIENTED_EDGE('',*,*,#236128,.F.); +#236128 = EDGE_CURVE('',#236129,#236121,#236131,.T.); +#236129 = VERTEX_POINT('',#236130); +#236130 = CARTESIAN_POINT('',(126.901429,-119.83907,1.51)); +#236131 = LINE('',#236132,#236133); +#236132 = CARTESIAN_POINT('',(126.901429,-119.83907,1.51)); +#236133 = VECTOR('',#236134,1.); +#236134 = DIRECTION('',(0.,0.,1.)); +#236135 = ORIENTED_EDGE('',*,*,#236136,.F.); +#236136 = EDGE_CURVE('',#236098,#236129,#236137,.T.); +#236137 = LINE('',#236138,#236139); +#236138 = CARTESIAN_POINT('',(126.905396,-119.824265,1.51)); +#236139 = VECTOR('',#236140,1.); +#236140 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#236141 = PLANE('',#236142); +#236142 = AXIS2_PLACEMENT_3D('',#236143,#236144,#236145); +#236143 = CARTESIAN_POINT('',(126.905396,-119.824265,1.51)); +#236144 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#236145 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#236146 = ADVANCED_FACE('',(#236147),#236174,.T.); +#236147 = FACE_BOUND('',#236148,.T.); +#236148 = EDGE_LOOP('',(#236149,#236150,#236159,#236167)); +#236149 = ORIENTED_EDGE('',*,*,#236128,.T.); +#236150 = ORIENTED_EDGE('',*,*,#236151,.T.); +#236151 = EDGE_CURVE('',#236121,#236152,#236154,.T.); +#236152 = VERTEX_POINT('',#236153); +#236153 = CARTESIAN_POINT('',(126.901429,-119.60946,1.545)); +#236154 = CIRCLE('',#236155,0.299999850918); +#236155 = AXIS2_PLACEMENT_3D('',#236156,#236157,#236158); +#236156 = CARTESIAN_POINT('',(126.6242652893,-119.724265,1.545)); +#236157 = DIRECTION('',(0.,0.,-1.)); +#236158 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#236159 = ORIENTED_EDGE('',*,*,#236160,.F.); +#236160 = EDGE_CURVE('',#236161,#236152,#236163,.T.); +#236161 = VERTEX_POINT('',#236162); +#236162 = CARTESIAN_POINT('',(126.901429,-119.60946,1.51)); +#236163 = LINE('',#236164,#236165); +#236164 = CARTESIAN_POINT('',(126.901429,-119.60946,1.51)); +#236165 = VECTOR('',#236166,1.); +#236166 = DIRECTION('',(0.,0.,1.)); +#236167 = ORIENTED_EDGE('',*,*,#236168,.F.); +#236168 = EDGE_CURVE('',#236129,#236161,#236169,.T.); +#236169 = CIRCLE('',#236170,0.299999850918); +#236170 = AXIS2_PLACEMENT_3D('',#236171,#236172,#236173); +#236171 = CARTESIAN_POINT('',(126.6242652893,-119.724265,1.51)); +#236172 = DIRECTION('',(0.,0.,-1.)); +#236173 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#236174 = CYLINDRICAL_SURFACE('',#236175,0.299999850918); +#236175 = AXIS2_PLACEMENT_3D('',#236176,#236177,#236178); +#236176 = CARTESIAN_POINT('',(126.6242652893,-119.724265,1.51)); +#236177 = DIRECTION('',(0.,0.,-1.)); +#236178 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#236179 = ADVANCED_FACE('',(#236180),#236205,.T.); +#236180 = FACE_BOUND('',#236181,.T.); +#236181 = EDGE_LOOP('',(#236182,#236183,#236191,#236199)); +#236182 = ORIENTED_EDGE('',*,*,#236160,.T.); +#236183 = ORIENTED_EDGE('',*,*,#236184,.T.); +#236184 = EDGE_CURVE('',#236152,#236185,#236187,.T.); +#236185 = VERTEX_POINT('',#236186); +#236186 = CARTESIAN_POINT('',(126.905396,-119.624265,1.545)); +#236187 = LINE('',#236188,#236189); +#236188 = CARTESIAN_POINT('',(126.901429,-119.60946,1.545)); +#236189 = VECTOR('',#236190,1.); +#236190 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#236191 = ORIENTED_EDGE('',*,*,#236192,.F.); +#236192 = EDGE_CURVE('',#236193,#236185,#236195,.T.); +#236193 = VERTEX_POINT('',#236194); +#236194 = CARTESIAN_POINT('',(126.905396,-119.624265,1.51)); +#236195 = LINE('',#236196,#236197); +#236196 = CARTESIAN_POINT('',(126.905396,-119.624265,1.51)); +#236197 = VECTOR('',#236198,1.); +#236198 = DIRECTION('',(0.,0.,1.)); +#236199 = ORIENTED_EDGE('',*,*,#236200,.F.); +#236200 = EDGE_CURVE('',#236161,#236193,#236201,.T.); +#236201 = LINE('',#236202,#236203); +#236202 = CARTESIAN_POINT('',(126.901429,-119.60946,1.51)); +#236203 = VECTOR('',#236204,1.); +#236204 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#236205 = PLANE('',#236206); +#236206 = AXIS2_PLACEMENT_3D('',#236207,#236208,#236209); +#236207 = CARTESIAN_POINT('',(126.901429,-119.60946,1.51)); +#236208 = DIRECTION('',(0.965925627198,0.258819788119,-0.)); +#236209 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#236210 = ADVANCED_FACE('',(#236211),#236236,.T.); +#236211 = FACE_BOUND('',#236212,.T.); +#236212 = EDGE_LOOP('',(#236213,#236214,#236222,#236230)); +#236213 = ORIENTED_EDGE('',*,*,#236192,.T.); +#236214 = ORIENTED_EDGE('',*,*,#236215,.T.); +#236215 = EDGE_CURVE('',#236185,#236216,#236218,.T.); +#236216 = VERTEX_POINT('',#236217); +#236217 = CARTESIAN_POINT('',(126.934313,-119.624265,1.545)); +#236218 = LINE('',#236219,#236220); +#236219 = CARTESIAN_POINT('',(126.905396,-119.624265,1.545)); +#236220 = VECTOR('',#236221,1.); +#236221 = DIRECTION('',(1.,0.,0.)); +#236222 = ORIENTED_EDGE('',*,*,#236223,.F.); +#236223 = EDGE_CURVE('',#236224,#236216,#236226,.T.); +#236224 = VERTEX_POINT('',#236225); +#236225 = CARTESIAN_POINT('',(126.934313,-119.624265,1.51)); +#236226 = LINE('',#236227,#236228); +#236227 = CARTESIAN_POINT('',(126.934313,-119.624265,1.51)); +#236228 = VECTOR('',#236229,1.); +#236229 = DIRECTION('',(0.,0.,1.)); +#236230 = ORIENTED_EDGE('',*,*,#236231,.F.); +#236231 = EDGE_CURVE('',#236193,#236224,#236232,.T.); +#236232 = LINE('',#236233,#236234); +#236233 = CARTESIAN_POINT('',(126.905396,-119.624265,1.51)); +#236234 = VECTOR('',#236235,1.); +#236235 = DIRECTION('',(1.,0.,0.)); +#236236 = PLANE('',#236237); +#236237 = AXIS2_PLACEMENT_3D('',#236238,#236239,#236240); +#236238 = CARTESIAN_POINT('',(126.905396,-119.624265,1.51)); +#236239 = DIRECTION('',(0.,1.,0.)); +#236240 = DIRECTION('',(1.,0.,0.)); +#236241 = ADVANCED_FACE('',(#236242),#236267,.T.); +#236242 = FACE_BOUND('',#236243,.T.); +#236243 = EDGE_LOOP('',(#236244,#236245,#236253,#236261)); +#236244 = ORIENTED_EDGE('',*,*,#236223,.T.); +#236245 = ORIENTED_EDGE('',*,*,#236246,.T.); +#236246 = EDGE_CURVE('',#236216,#236247,#236249,.T.); +#236247 = VERTEX_POINT('',#236248); +#236248 = CARTESIAN_POINT('',(127.844443,-118.716853,1.545)); +#236249 = LINE('',#236250,#236251); +#236250 = CARTESIAN_POINT('',(126.934313,-119.624265,1.545)); +#236251 = VECTOR('',#236252,1.); +#236252 = DIRECTION('',(0.70816341539,0.706048565683,0.)); +#236253 = ORIENTED_EDGE('',*,*,#236254,.F.); +#236254 = EDGE_CURVE('',#236255,#236247,#236257,.T.); +#236255 = VERTEX_POINT('',#236256); +#236256 = CARTESIAN_POINT('',(127.844443,-118.716853,1.51)); +#236257 = LINE('',#236258,#236259); +#236258 = CARTESIAN_POINT('',(127.844443,-118.716853,1.51)); +#236259 = VECTOR('',#236260,1.); +#236260 = DIRECTION('',(0.,0.,1.)); +#236261 = ORIENTED_EDGE('',*,*,#236262,.F.); +#236262 = EDGE_CURVE('',#236224,#236255,#236263,.T.); +#236263 = LINE('',#236264,#236265); +#236264 = CARTESIAN_POINT('',(126.934313,-119.624265,1.51)); +#236265 = VECTOR('',#236266,1.); +#236266 = DIRECTION('',(0.70816341539,0.706048565683,0.)); +#236267 = PLANE('',#236268); +#236268 = AXIS2_PLACEMENT_3D('',#236269,#236270,#236271); +#236269 = CARTESIAN_POINT('',(126.934313,-119.624265,1.51)); +#236270 = DIRECTION('',(-0.706048565683,0.70816341539,0.)); +#236271 = DIRECTION('',(0.70816341539,0.706048565683,0.)); +#236272 = ADVANCED_FACE('',(#236273),#236298,.T.); +#236273 = FACE_BOUND('',#236274,.T.); +#236274 = EDGE_LOOP('',(#236275,#236276,#236284,#236292)); +#236275 = ORIENTED_EDGE('',*,*,#236254,.T.); +#236276 = ORIENTED_EDGE('',*,*,#236277,.T.); +#236277 = EDGE_CURVE('',#236247,#236278,#236280,.T.); +#236278 = VERTEX_POINT('',#236279); +#236279 = CARTESIAN_POINT('',(127.880491,-118.701921,1.545)); +#236280 = LINE('',#236281,#236282); +#236281 = CARTESIAN_POINT('',(127.844443,-118.716853,1.545)); +#236282 = VECTOR('',#236283,1.); +#236283 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236284 = ORIENTED_EDGE('',*,*,#236285,.F.); +#236285 = EDGE_CURVE('',#236286,#236278,#236288,.T.); +#236286 = VERTEX_POINT('',#236287); +#236287 = CARTESIAN_POINT('',(127.880491,-118.701921,1.51)); +#236288 = LINE('',#236289,#236290); +#236289 = CARTESIAN_POINT('',(127.880491,-118.701921,1.51)); +#236290 = VECTOR('',#236291,1.); +#236291 = DIRECTION('',(0.,0.,1.)); +#236292 = ORIENTED_EDGE('',*,*,#236293,.F.); +#236293 = EDGE_CURVE('',#236255,#236286,#236294,.T.); +#236294 = LINE('',#236295,#236296); +#236295 = CARTESIAN_POINT('',(127.844443,-118.716853,1.51)); +#236296 = VECTOR('',#236297,1.); +#236297 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236298 = PLANE('',#236299); +#236299 = AXIS2_PLACEMENT_3D('',#236300,#236301,#236302); +#236300 = CARTESIAN_POINT('',(127.844443,-118.716853,1.51)); +#236301 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#236302 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236303 = ADVANCED_FACE('',(#236304),#236329,.T.); +#236304 = FACE_BOUND('',#236305,.T.); +#236305 = EDGE_LOOP('',(#236306,#236307,#236315,#236323)); +#236306 = ORIENTED_EDGE('',*,*,#236285,.T.); +#236307 = ORIENTED_EDGE('',*,*,#236308,.T.); +#236308 = EDGE_CURVE('',#236278,#236309,#236311,.T.); +#236309 = VERTEX_POINT('',#236310); +#236310 = CARTESIAN_POINT('',(128.058578,-118.7,1.545)); +#236311 = LINE('',#236312,#236313); +#236312 = CARTESIAN_POINT('',(127.880491,-118.701921,1.545)); +#236313 = VECTOR('',#236314,1.); +#236314 = DIRECTION('',(0.999941826874,1.078623509532E-02,0.)); +#236315 = ORIENTED_EDGE('',*,*,#236316,.F.); +#236316 = EDGE_CURVE('',#236317,#236309,#236319,.T.); +#236317 = VERTEX_POINT('',#236318); +#236318 = CARTESIAN_POINT('',(128.058578,-118.7,1.51)); +#236319 = LINE('',#236320,#236321); +#236320 = CARTESIAN_POINT('',(128.058578,-118.7,1.51)); +#236321 = VECTOR('',#236322,1.); +#236322 = DIRECTION('',(0.,0.,1.)); +#236323 = ORIENTED_EDGE('',*,*,#236324,.F.); +#236324 = EDGE_CURVE('',#236286,#236317,#236325,.T.); +#236325 = LINE('',#236326,#236327); +#236326 = CARTESIAN_POINT('',(127.880491,-118.701921,1.51)); +#236327 = VECTOR('',#236328,1.); +#236328 = DIRECTION('',(0.999941826874,1.078623509532E-02,0.)); +#236329 = PLANE('',#236330); +#236330 = AXIS2_PLACEMENT_3D('',#236331,#236332,#236333); +#236331 = CARTESIAN_POINT('',(127.880491,-118.701921,1.51)); +#236332 = DIRECTION('',(-1.078623509532E-02,0.999941826874,0.)); +#236333 = DIRECTION('',(0.999941826874,1.078623509532E-02,0.)); +#236334 = ADVANCED_FACE('',(#236335),#236360,.T.); +#236335 = FACE_BOUND('',#236336,.T.); +#236336 = EDGE_LOOP('',(#236337,#236338,#236346,#236354)); +#236337 = ORIENTED_EDGE('',*,*,#236316,.T.); +#236338 = ORIENTED_EDGE('',*,*,#236339,.T.); +#236339 = EDGE_CURVE('',#236309,#236340,#236342,.T.); +#236340 = VERTEX_POINT('',#236341); +#236341 = CARTESIAN_POINT('',(129.5,-117.258578,1.545)); +#236342 = LINE('',#236343,#236344); +#236343 = CARTESIAN_POINT('',(128.058578,-118.7,1.545)); +#236344 = VECTOR('',#236345,1.); +#236345 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236346 = ORIENTED_EDGE('',*,*,#236347,.F.); +#236347 = EDGE_CURVE('',#236348,#236340,#236350,.T.); +#236348 = VERTEX_POINT('',#236349); +#236349 = CARTESIAN_POINT('',(129.5,-117.258578,1.51)); +#236350 = LINE('',#236351,#236352); +#236351 = CARTESIAN_POINT('',(129.5,-117.258578,1.51)); +#236352 = VECTOR('',#236353,1.); +#236353 = DIRECTION('',(0.,0.,1.)); +#236354 = ORIENTED_EDGE('',*,*,#236355,.F.); +#236355 = EDGE_CURVE('',#236317,#236348,#236356,.T.); +#236356 = LINE('',#236357,#236358); +#236357 = CARTESIAN_POINT('',(128.058578,-118.7,1.51)); +#236358 = VECTOR('',#236359,1.); +#236359 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236360 = PLANE('',#236361); +#236361 = AXIS2_PLACEMENT_3D('',#236362,#236363,#236364); +#236362 = CARTESIAN_POINT('',(128.058578,-118.7,1.51)); +#236363 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#236364 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#236365 = ADVANCED_FACE('',(#236366),#236391,.T.); +#236366 = FACE_BOUND('',#236367,.T.); +#236367 = EDGE_LOOP('',(#236368,#236369,#236377,#236385)); +#236368 = ORIENTED_EDGE('',*,*,#236347,.T.); +#236369 = ORIENTED_EDGE('',*,*,#236370,.T.); +#236370 = EDGE_CURVE('',#236340,#236371,#236373,.T.); +#236371 = VERTEX_POINT('',#236372); +#236372 = CARTESIAN_POINT('',(129.5,-116.292893,1.545)); +#236373 = LINE('',#236374,#236375); +#236374 = CARTESIAN_POINT('',(129.5,-117.258578,1.545)); +#236375 = VECTOR('',#236376,1.); +#236376 = DIRECTION('',(0.,1.,0.)); +#236377 = ORIENTED_EDGE('',*,*,#236378,.F.); +#236378 = EDGE_CURVE('',#236379,#236371,#236381,.T.); +#236379 = VERTEX_POINT('',#236380); +#236380 = CARTESIAN_POINT('',(129.5,-116.292893,1.51)); +#236381 = LINE('',#236382,#236383); +#236382 = CARTESIAN_POINT('',(129.5,-116.292893,1.51)); +#236383 = VECTOR('',#236384,1.); +#236384 = DIRECTION('',(0.,0.,1.)); +#236385 = ORIENTED_EDGE('',*,*,#236386,.F.); +#236386 = EDGE_CURVE('',#236348,#236379,#236387,.T.); +#236387 = LINE('',#236388,#236389); +#236388 = CARTESIAN_POINT('',(129.5,-117.258578,1.51)); +#236389 = VECTOR('',#236390,1.); +#236390 = DIRECTION('',(0.,1.,0.)); +#236391 = PLANE('',#236392); +#236392 = AXIS2_PLACEMENT_3D('',#236393,#236394,#236395); +#236393 = CARTESIAN_POINT('',(129.5,-117.258578,1.51)); +#236394 = DIRECTION('',(-1.,0.,0.)); +#236395 = DIRECTION('',(0.,1.,0.)); +#236396 = ADVANCED_FACE('',(#236397),#236422,.T.); +#236397 = FACE_BOUND('',#236398,.T.); +#236398 = EDGE_LOOP('',(#236399,#236400,#236408,#236416)); +#236399 = ORIENTED_EDGE('',*,*,#236378,.T.); +#236400 = ORIENTED_EDGE('',*,*,#236401,.T.); +#236401 = EDGE_CURVE('',#236371,#236402,#236404,.T.); +#236402 = VERTEX_POINT('',#236403); +#236403 = CARTESIAN_POINT('',(127.316853,-114.107028,1.545)); +#236404 = LINE('',#236405,#236406); +#236405 = CARTESIAN_POINT('',(129.5,-116.292893,1.545)); +#236406 = VECTOR('',#236407,1.); +#236407 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#236408 = ORIENTED_EDGE('',*,*,#236409,.F.); +#236409 = EDGE_CURVE('',#236410,#236402,#236412,.T.); +#236410 = VERTEX_POINT('',#236411); +#236411 = CARTESIAN_POINT('',(127.316853,-114.107028,1.51)); +#236412 = LINE('',#236413,#236414); +#236413 = CARTESIAN_POINT('',(127.316853,-114.107028,1.51)); +#236414 = VECTOR('',#236415,1.); +#236415 = DIRECTION('',(0.,0.,1.)); +#236416 = ORIENTED_EDGE('',*,*,#236417,.F.); +#236417 = EDGE_CURVE('',#236379,#236410,#236418,.T.); +#236418 = LINE('',#236419,#236420); +#236419 = CARTESIAN_POINT('',(129.5,-116.292893,1.51)); +#236420 = VECTOR('',#236421,1.); +#236421 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#236422 = PLANE('',#236423); +#236423 = AXIS2_PLACEMENT_3D('',#236424,#236425,#236426); +#236424 = CARTESIAN_POINT('',(129.5,-116.292893,1.51)); +#236425 = DIRECTION('',(-0.707546541489,-0.70666674722,0.)); +#236426 = DIRECTION('',(-0.70666674722,0.707546541489,0.)); +#236427 = ADVANCED_FACE('',(#236428),#236453,.T.); +#236428 = FACE_BOUND('',#236429,.T.); +#236429 = EDGE_LOOP('',(#236430,#236431,#236439,#236447)); +#236430 = ORIENTED_EDGE('',*,*,#236409,.T.); +#236431 = ORIENTED_EDGE('',*,*,#236432,.T.); +#236432 = EDGE_CURVE('',#236402,#236433,#236435,.T.); +#236433 = VERTEX_POINT('',#236434); +#236434 = CARTESIAN_POINT('',(127.301921,-114.07098,1.545)); +#236435 = LINE('',#236436,#236437); +#236436 = CARTESIAN_POINT('',(127.316853,-114.107028,1.545)); +#236437 = VECTOR('',#236438,1.); +#236438 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#236439 = ORIENTED_EDGE('',*,*,#236440,.F.); +#236440 = EDGE_CURVE('',#236441,#236433,#236443,.T.); +#236441 = VERTEX_POINT('',#236442); +#236442 = CARTESIAN_POINT('',(127.301921,-114.07098,1.51)); +#236443 = LINE('',#236444,#236445); +#236444 = CARTESIAN_POINT('',(127.301921,-114.07098,1.51)); +#236445 = VECTOR('',#236446,1.); +#236446 = DIRECTION('',(0.,0.,1.)); +#236447 = ORIENTED_EDGE('',*,*,#236448,.F.); +#236448 = EDGE_CURVE('',#236410,#236441,#236449,.T.); +#236449 = LINE('',#236450,#236451); +#236450 = CARTESIAN_POINT('',(127.316853,-114.107028,1.51)); +#236451 = VECTOR('',#236452,1.); +#236452 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#236453 = PLANE('',#236454); +#236454 = AXIS2_PLACEMENT_3D('',#236455,#236456,#236457); +#236455 = CARTESIAN_POINT('',(127.316853,-114.107028,1.51)); +#236456 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#236457 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#236458 = ADVANCED_FACE('',(#236459),#236484,.T.); +#236459 = FACE_BOUND('',#236460,.T.); +#236460 = EDGE_LOOP('',(#236461,#236462,#236470,#236478)); +#236461 = ORIENTED_EDGE('',*,*,#236440,.T.); +#236462 = ORIENTED_EDGE('',*,*,#236463,.T.); +#236463 = EDGE_CURVE('',#236433,#236464,#236466,.T.); +#236464 = VERTEX_POINT('',#236465); +#236465 = CARTESIAN_POINT('',(127.301921,-104.380491,1.545)); +#236466 = LINE('',#236467,#236468); +#236467 = CARTESIAN_POINT('',(127.301921,-114.07098,1.545)); +#236468 = VECTOR('',#236469,1.); +#236469 = DIRECTION('',(0.,1.,0.)); +#236470 = ORIENTED_EDGE('',*,*,#236471,.F.); +#236471 = EDGE_CURVE('',#236472,#236464,#236474,.T.); +#236472 = VERTEX_POINT('',#236473); +#236473 = CARTESIAN_POINT('',(127.301921,-104.380491,1.51)); +#236474 = LINE('',#236475,#236476); +#236475 = CARTESIAN_POINT('',(127.301921,-104.380491,1.51)); +#236476 = VECTOR('',#236477,1.); +#236477 = DIRECTION('',(0.,0.,1.)); +#236478 = ORIENTED_EDGE('',*,*,#236479,.F.); +#236479 = EDGE_CURVE('',#236441,#236472,#236480,.T.); +#236480 = LINE('',#236481,#236482); +#236481 = CARTESIAN_POINT('',(127.301921,-114.07098,1.51)); +#236482 = VECTOR('',#236483,1.); +#236483 = DIRECTION('',(0.,1.,0.)); +#236484 = PLANE('',#236485); +#236485 = AXIS2_PLACEMENT_3D('',#236486,#236487,#236488); +#236486 = CARTESIAN_POINT('',(127.301921,-114.07098,1.51)); +#236487 = DIRECTION('',(-1.,0.,0.)); +#236488 = DIRECTION('',(0.,1.,0.)); +#236489 = ADVANCED_FACE('',(#236490),#236515,.T.); +#236490 = FACE_BOUND('',#236491,.T.); +#236491 = EDGE_LOOP('',(#236492,#236493,#236501,#236509)); +#236492 = ORIENTED_EDGE('',*,*,#236471,.T.); +#236493 = ORIENTED_EDGE('',*,*,#236494,.T.); +#236494 = EDGE_CURVE('',#236464,#236495,#236497,.T.); +#236495 = VERTEX_POINT('',#236496); +#236496 = CARTESIAN_POINT('',(127.316853,-104.344443,1.545)); +#236497 = LINE('',#236498,#236499); +#236498 = CARTESIAN_POINT('',(127.301921,-104.380491,1.545)); +#236499 = VECTOR('',#236500,1.); +#236500 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#236501 = ORIENTED_EDGE('',*,*,#236502,.F.); +#236502 = EDGE_CURVE('',#236503,#236495,#236505,.T.); +#236503 = VERTEX_POINT('',#236504); +#236504 = CARTESIAN_POINT('',(127.316853,-104.344443,1.51)); +#236505 = LINE('',#236506,#236507); +#236506 = CARTESIAN_POINT('',(127.316853,-104.344443,1.51)); +#236507 = VECTOR('',#236508,1.); +#236508 = DIRECTION('',(0.,0.,1.)); +#236509 = ORIENTED_EDGE('',*,*,#236510,.F.); +#236510 = EDGE_CURVE('',#236472,#236503,#236511,.T.); +#236511 = LINE('',#236512,#236513); +#236512 = CARTESIAN_POINT('',(127.301921,-104.380491,1.51)); +#236513 = VECTOR('',#236514,1.); +#236514 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#236515 = PLANE('',#236516); +#236516 = AXIS2_PLACEMENT_3D('',#236517,#236518,#236519); +#236517 = CARTESIAN_POINT('',(127.301921,-104.380491,1.51)); +#236518 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#236519 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#236520 = ADVANCED_FACE('',(#236521),#236546,.T.); +#236521 = FACE_BOUND('',#236522,.T.); +#236522 = EDGE_LOOP('',(#236523,#236524,#236532,#236540)); +#236523 = ORIENTED_EDGE('',*,*,#236502,.T.); +#236524 = ORIENTED_EDGE('',*,*,#236525,.T.); +#236525 = EDGE_CURVE('',#236495,#236526,#236528,.T.); +#236526 = VERTEX_POINT('',#236527); +#236527 = CARTESIAN_POINT('',(127.830499,-103.828078,1.545)); +#236528 = LINE('',#236529,#236530); +#236529 = CARTESIAN_POINT('',(127.316853,-104.344443,1.545)); +#236530 = VECTOR('',#236531,1.); +#236531 = DIRECTION('',(0.705237719327,0.708970915651,0.)); +#236532 = ORIENTED_EDGE('',*,*,#236533,.F.); +#236533 = EDGE_CURVE('',#236534,#236526,#236536,.T.); +#236534 = VERTEX_POINT('',#236535); +#236535 = CARTESIAN_POINT('',(127.830499,-103.828078,1.51)); +#236536 = LINE('',#236537,#236538); +#236537 = CARTESIAN_POINT('',(127.830499,-103.828078,1.51)); +#236538 = VECTOR('',#236539,1.); +#236539 = DIRECTION('',(0.,0.,1.)); +#236540 = ORIENTED_EDGE('',*,*,#236541,.F.); +#236541 = EDGE_CURVE('',#236503,#236534,#236542,.T.); +#236542 = LINE('',#236543,#236544); +#236543 = CARTESIAN_POINT('',(127.316853,-104.344443,1.51)); +#236544 = VECTOR('',#236545,1.); +#236545 = DIRECTION('',(0.705237719327,0.708970915651,0.)); +#236546 = PLANE('',#236547); +#236547 = AXIS2_PLACEMENT_3D('',#236548,#236549,#236550); +#236548 = CARTESIAN_POINT('',(127.316853,-104.344443,1.51)); +#236549 = DIRECTION('',(-0.708970915651,0.705237719327,0.)); +#236550 = DIRECTION('',(0.705237719327,0.708970915651,0.)); +#236551 = ADVANCED_FACE('',(#236552),#236577,.T.); +#236552 = FACE_BOUND('',#236553,.T.); +#236553 = EDGE_LOOP('',(#236554,#236555,#236563,#236571)); +#236554 = ORIENTED_EDGE('',*,*,#236533,.T.); +#236555 = ORIENTED_EDGE('',*,*,#236556,.T.); +#236556 = EDGE_CURVE('',#236526,#236557,#236559,.T.); +#236557 = VERTEX_POINT('',#236558); +#236558 = CARTESIAN_POINT('',(127.822836,-103.814805,1.545)); +#236559 = LINE('',#236560,#236561); +#236560 = CARTESIAN_POINT('',(127.830499,-103.828078,1.545)); +#236561 = VECTOR('',#236562,1.); +#236562 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#236563 = ORIENTED_EDGE('',*,*,#236564,.F.); +#236564 = EDGE_CURVE('',#236565,#236557,#236567,.T.); +#236565 = VERTEX_POINT('',#236566); +#236566 = CARTESIAN_POINT('',(127.822836,-103.814805,1.51)); +#236567 = LINE('',#236568,#236569); +#236568 = CARTESIAN_POINT('',(127.822836,-103.814805,1.51)); +#236569 = VECTOR('',#236570,1.); +#236570 = DIRECTION('',(0.,0.,1.)); +#236571 = ORIENTED_EDGE('',*,*,#236572,.F.); +#236572 = EDGE_CURVE('',#236534,#236565,#236573,.T.); +#236573 = LINE('',#236574,#236575); +#236574 = CARTESIAN_POINT('',(127.830499,-103.828078,1.51)); +#236575 = VECTOR('',#236576,1.); +#236576 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#236577 = PLANE('',#236578); +#236578 = AXIS2_PLACEMENT_3D('',#236579,#236580,#236581); +#236579 = CARTESIAN_POINT('',(127.830499,-103.828078,1.51)); +#236580 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#236581 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#236582 = ADVANCED_FACE('',(#236583),#236610,.T.); +#236583 = FACE_BOUND('',#236584,.T.); +#236584 = EDGE_LOOP('',(#236585,#236586,#236595,#236603)); +#236585 = ORIENTED_EDGE('',*,*,#236564,.T.); +#236586 = ORIENTED_EDGE('',*,*,#236587,.T.); +#236587 = EDGE_CURVE('',#236557,#236588,#236590,.T.); +#236588 = VERTEX_POINT('',#236589); +#236589 = CARTESIAN_POINT('',(127.985195,-103.977164,1.545)); +#236590 = CIRCLE('',#236591,0.300000118202); +#236591 = AXIS2_PLACEMENT_3D('',#236592,#236593,#236594); +#236592 = CARTESIAN_POINT('',(128.1,-103.7,1.545)); +#236593 = DIRECTION('',(0.,0.,-1.)); +#236594 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#236595 = ORIENTED_EDGE('',*,*,#236596,.F.); +#236596 = EDGE_CURVE('',#236597,#236588,#236599,.T.); +#236597 = VERTEX_POINT('',#236598); +#236598 = CARTESIAN_POINT('',(127.985195,-103.977164,1.51)); +#236599 = LINE('',#236600,#236601); +#236600 = CARTESIAN_POINT('',(127.985195,-103.977164,1.51)); +#236601 = VECTOR('',#236602,1.); +#236602 = DIRECTION('',(0.,0.,1.)); +#236603 = ORIENTED_EDGE('',*,*,#236604,.F.); +#236604 = EDGE_CURVE('',#236565,#236597,#236605,.T.); +#236605 = CIRCLE('',#236606,0.300000118202); +#236606 = AXIS2_PLACEMENT_3D('',#236607,#236608,#236609); +#236607 = CARTESIAN_POINT('',(128.1,-103.7,1.51)); +#236608 = DIRECTION('',(0.,0.,-1.)); +#236609 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#236610 = CYLINDRICAL_SURFACE('',#236611,0.300000118202); +#236611 = AXIS2_PLACEMENT_3D('',#236612,#236613,#236614); +#236612 = CARTESIAN_POINT('',(128.1,-103.7,1.51)); +#236613 = DIRECTION('',(0.,0.,-1.)); +#236614 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#236615 = ADVANCED_FACE('',(#236616),#236632,.T.); +#236616 = FACE_BOUND('',#236617,.T.); +#236617 = EDGE_LOOP('',(#236618,#236619,#236625,#236626)); +#236618 = ORIENTED_EDGE('',*,*,#236596,.T.); +#236619 = ORIENTED_EDGE('',*,*,#236620,.T.); +#236620 = EDGE_CURVE('',#236588,#235741,#236621,.T.); +#236621 = LINE('',#236622,#236623); +#236622 = CARTESIAN_POINT('',(127.985195,-103.977164,1.545)); +#236623 = VECTOR('',#236624,1.); +#236624 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#236625 = ORIENTED_EDGE('',*,*,#235738,.F.); +#236626 = ORIENTED_EDGE('',*,*,#236627,.F.); +#236627 = EDGE_CURVE('',#236597,#235739,#236628,.T.); +#236628 = LINE('',#236629,#236630); +#236629 = CARTESIAN_POINT('',(127.985195,-103.977164,1.51)); +#236630 = VECTOR('',#236631,1.); +#236631 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#236632 = PLANE('',#236633); +#236633 = AXIS2_PLACEMENT_3D('',#236634,#236635,#236636); +#236634 = CARTESIAN_POINT('',(127.985195,-103.977164,1.51)); +#236635 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#236636 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#236637 = ADVANCED_FACE('',(#236638),#236665,.F.); +#236638 = FACE_BOUND('',#236639,.T.); +#236639 = EDGE_LOOP('',(#236640,#236650,#236657,#236658)); +#236640 = ORIENTED_EDGE('',*,*,#236641,.T.); +#236641 = EDGE_CURVE('',#236642,#236644,#236646,.T.); +#236642 = VERTEX_POINT('',#236643); +#236643 = CARTESIAN_POINT('',(126.76152,-119.724265,1.51)); +#236644 = VERTEX_POINT('',#236645); +#236645 = CARTESIAN_POINT('',(126.76152,-119.724265,1.545)); +#236646 = LINE('',#236647,#236648); +#236647 = CARTESIAN_POINT('',(126.76152,-119.724265,1.51)); +#236648 = VECTOR('',#236649,1.); +#236649 = DIRECTION('',(0.,0.,1.)); +#236650 = ORIENTED_EDGE('',*,*,#236651,.T.); +#236651 = EDGE_CURVE('',#236644,#236644,#236652,.T.); +#236652 = CIRCLE('',#236653,0.137255); +#236653 = AXIS2_PLACEMENT_3D('',#236654,#236655,#236656); +#236654 = CARTESIAN_POINT('',(126.624265,-119.724265,1.545)); +#236655 = DIRECTION('',(0.,0.,1.)); +#236656 = DIRECTION('',(1.,0.,-0.)); +#236657 = ORIENTED_EDGE('',*,*,#236641,.F.); +#236658 = ORIENTED_EDGE('',*,*,#236659,.F.); +#236659 = EDGE_CURVE('',#236642,#236642,#236660,.T.); +#236660 = CIRCLE('',#236661,0.137255); +#236661 = AXIS2_PLACEMENT_3D('',#236662,#236663,#236664); +#236662 = CARTESIAN_POINT('',(126.624265,-119.724265,1.51)); +#236663 = DIRECTION('',(0.,0.,1.)); +#236664 = DIRECTION('',(1.,0.,-0.)); +#236665 = CYLINDRICAL_SURFACE('',#236666,0.137255); +#236666 = AXIS2_PLACEMENT_3D('',#236667,#236668,#236669); +#236667 = CARTESIAN_POINT('',(126.624265,-119.724265,1.51)); +#236668 = DIRECTION('',(-0.,-0.,-1.)); +#236669 = DIRECTION('',(1.,0.,-0.)); +#236670 = ADVANCED_FACE('',(#236671),#236698,.F.); +#236671 = FACE_BOUND('',#236672,.T.); +#236672 = EDGE_LOOP('',(#236673,#236683,#236690,#236691)); +#236673 = ORIENTED_EDGE('',*,*,#236674,.T.); +#236674 = EDGE_CURVE('',#236675,#236677,#236679,.T.); +#236675 = VERTEX_POINT('',#236676); +#236676 = CARTESIAN_POINT('',(128.237255,-103.7,1.51)); +#236677 = VERTEX_POINT('',#236678); +#236678 = CARTESIAN_POINT('',(128.237255,-103.7,1.545)); +#236679 = LINE('',#236680,#236681); +#236680 = CARTESIAN_POINT('',(128.237255,-103.7,1.51)); +#236681 = VECTOR('',#236682,1.); +#236682 = DIRECTION('',(0.,0.,1.)); +#236683 = ORIENTED_EDGE('',*,*,#236684,.T.); +#236684 = EDGE_CURVE('',#236677,#236677,#236685,.T.); +#236685 = CIRCLE('',#236686,0.137255); +#236686 = AXIS2_PLACEMENT_3D('',#236687,#236688,#236689); +#236687 = CARTESIAN_POINT('',(128.1,-103.7,1.545)); +#236688 = DIRECTION('',(0.,0.,1.)); +#236689 = DIRECTION('',(1.,0.,-0.)); +#236690 = ORIENTED_EDGE('',*,*,#236674,.F.); +#236691 = ORIENTED_EDGE('',*,*,#236692,.F.); +#236692 = EDGE_CURVE('',#236675,#236675,#236693,.T.); +#236693 = CIRCLE('',#236694,0.137255); +#236694 = AXIS2_PLACEMENT_3D('',#236695,#236696,#236697); +#236695 = CARTESIAN_POINT('',(128.1,-103.7,1.51)); +#236696 = DIRECTION('',(0.,0.,1.)); +#236697 = DIRECTION('',(1.,0.,-0.)); +#236698 = CYLINDRICAL_SURFACE('',#236699,0.137255); +#236699 = AXIS2_PLACEMENT_3D('',#236700,#236701,#236702); +#236700 = CARTESIAN_POINT('',(128.1,-103.7,1.51)); +#236701 = DIRECTION('',(-0.,-0.,-1.)); +#236702 = DIRECTION('',(1.,0.,-0.)); +#236703 = ADVANCED_FACE('',(#236704,#236735,#236738),#236741,.F.); +#236704 = FACE_BOUND('',#236705,.T.); +#236705 = EDGE_LOOP('',(#236706,#236707,#236708,#236709,#236710,#236711, + #236712,#236713,#236714,#236715,#236716,#236717,#236718,#236719, + #236720,#236721,#236722,#236723,#236724,#236725,#236726,#236727, + #236728,#236729,#236730,#236731,#236732,#236733,#236734)); +#236706 = ORIENTED_EDGE('',*,*,#235764,.T.); +#236707 = ORIENTED_EDGE('',*,*,#235795,.T.); +#236708 = ORIENTED_EDGE('',*,*,#235826,.T.); +#236709 = ORIENTED_EDGE('',*,*,#235857,.T.); +#236710 = ORIENTED_EDGE('',*,*,#235888,.T.); +#236711 = ORIENTED_EDGE('',*,*,#235919,.T.); +#236712 = ORIENTED_EDGE('',*,*,#235950,.T.); +#236713 = ORIENTED_EDGE('',*,*,#235981,.T.); +#236714 = ORIENTED_EDGE('',*,*,#236012,.T.); +#236715 = ORIENTED_EDGE('',*,*,#236043,.T.); +#236716 = ORIENTED_EDGE('',*,*,#236074,.T.); +#236717 = ORIENTED_EDGE('',*,*,#236105,.T.); +#236718 = ORIENTED_EDGE('',*,*,#236136,.T.); +#236719 = ORIENTED_EDGE('',*,*,#236168,.T.); +#236720 = ORIENTED_EDGE('',*,*,#236200,.T.); +#236721 = ORIENTED_EDGE('',*,*,#236231,.T.); +#236722 = ORIENTED_EDGE('',*,*,#236262,.T.); +#236723 = ORIENTED_EDGE('',*,*,#236293,.T.); +#236724 = ORIENTED_EDGE('',*,*,#236324,.T.); +#236725 = ORIENTED_EDGE('',*,*,#236355,.T.); +#236726 = ORIENTED_EDGE('',*,*,#236386,.T.); +#236727 = ORIENTED_EDGE('',*,*,#236417,.T.); +#236728 = ORIENTED_EDGE('',*,*,#236448,.T.); +#236729 = ORIENTED_EDGE('',*,*,#236479,.T.); +#236730 = ORIENTED_EDGE('',*,*,#236510,.T.); +#236731 = ORIENTED_EDGE('',*,*,#236541,.T.); +#236732 = ORIENTED_EDGE('',*,*,#236572,.T.); +#236733 = ORIENTED_EDGE('',*,*,#236604,.T.); +#236734 = ORIENTED_EDGE('',*,*,#236627,.T.); +#236735 = FACE_BOUND('',#236736,.T.); +#236736 = EDGE_LOOP('',(#236737)); +#236737 = ORIENTED_EDGE('',*,*,#236659,.T.); +#236738 = FACE_BOUND('',#236739,.T.); +#236739 = EDGE_LOOP('',(#236740)); +#236740 = ORIENTED_EDGE('',*,*,#236692,.T.); +#236741 = PLANE('',#236742); +#236742 = AXIS2_PLACEMENT_3D('',#236743,#236744,#236745); +#236743 = CARTESIAN_POINT('',(0.,0.,1.51)); +#236744 = DIRECTION('',(0.,0.,1.)); +#236745 = DIRECTION('',(1.,0.,-0.)); +#236746 = ADVANCED_FACE('',(#236747,#236778,#236781),#236784,.T.); +#236747 = FACE_BOUND('',#236748,.F.); +#236748 = EDGE_LOOP('',(#236749,#236750,#236751,#236752,#236753,#236754, + #236755,#236756,#236757,#236758,#236759,#236760,#236761,#236762, + #236763,#236764,#236765,#236766,#236767,#236768,#236769,#236770, + #236771,#236772,#236773,#236774,#236775,#236776,#236777)); +#236749 = ORIENTED_EDGE('',*,*,#235748,.T.); +#236750 = ORIENTED_EDGE('',*,*,#235779,.T.); +#236751 = ORIENTED_EDGE('',*,*,#235810,.T.); +#236752 = ORIENTED_EDGE('',*,*,#235841,.T.); +#236753 = ORIENTED_EDGE('',*,*,#235872,.T.); +#236754 = ORIENTED_EDGE('',*,*,#235903,.T.); +#236755 = ORIENTED_EDGE('',*,*,#235934,.T.); +#236756 = ORIENTED_EDGE('',*,*,#235965,.T.); +#236757 = ORIENTED_EDGE('',*,*,#235996,.T.); +#236758 = ORIENTED_EDGE('',*,*,#236027,.T.); +#236759 = ORIENTED_EDGE('',*,*,#236058,.T.); +#236760 = ORIENTED_EDGE('',*,*,#236089,.T.); +#236761 = ORIENTED_EDGE('',*,*,#236120,.T.); +#236762 = ORIENTED_EDGE('',*,*,#236151,.T.); +#236763 = ORIENTED_EDGE('',*,*,#236184,.T.); +#236764 = ORIENTED_EDGE('',*,*,#236215,.T.); +#236765 = ORIENTED_EDGE('',*,*,#236246,.T.); +#236766 = ORIENTED_EDGE('',*,*,#236277,.T.); +#236767 = ORIENTED_EDGE('',*,*,#236308,.T.); +#236768 = ORIENTED_EDGE('',*,*,#236339,.T.); +#236769 = ORIENTED_EDGE('',*,*,#236370,.T.); +#236770 = ORIENTED_EDGE('',*,*,#236401,.T.); +#236771 = ORIENTED_EDGE('',*,*,#236432,.T.); +#236772 = ORIENTED_EDGE('',*,*,#236463,.T.); +#236773 = ORIENTED_EDGE('',*,*,#236494,.T.); +#236774 = ORIENTED_EDGE('',*,*,#236525,.T.); +#236775 = ORIENTED_EDGE('',*,*,#236556,.T.); +#236776 = ORIENTED_EDGE('',*,*,#236587,.T.); +#236777 = ORIENTED_EDGE('',*,*,#236620,.T.); +#236778 = FACE_BOUND('',#236779,.F.); +#236779 = EDGE_LOOP('',(#236780)); +#236780 = ORIENTED_EDGE('',*,*,#236651,.T.); +#236781 = FACE_BOUND('',#236782,.F.); +#236782 = EDGE_LOOP('',(#236783)); +#236783 = ORIENTED_EDGE('',*,*,#236684,.T.); +#236784 = PLANE('',#236785); +#236785 = AXIS2_PLACEMENT_3D('',#236786,#236787,#236788); +#236786 = CARTESIAN_POINT('',(0.,0.,1.545)); +#236787 = DIRECTION('',(0.,0.,1.)); +#236788 = DIRECTION('',(1.,0.,-0.)); +#236789 = MANIFOLD_SOLID_BREP('',#236790); +#236790 = CLOSED_SHELL('',(#236791,#236831,#236862,#236895,#236926, + #236957,#236988,#237019,#237052,#237083,#237114,#237145,#237167, + #237200,#237223)); +#236791 = ADVANCED_FACE('',(#236792),#236826,.T.); +#236792 = FACE_BOUND('',#236793,.T.); +#236793 = EDGE_LOOP('',(#236794,#236804,#236812,#236820)); +#236794 = ORIENTED_EDGE('',*,*,#236795,.T.); +#236795 = EDGE_CURVE('',#236796,#236798,#236800,.T.); +#236796 = VERTEX_POINT('',#236797); +#236797 = CARTESIAN_POINT('',(134.524443,-65.836853,1.51)); +#236798 = VERTEX_POINT('',#236799); +#236799 = CARTESIAN_POINT('',(134.524443,-65.836853,1.545)); +#236800 = LINE('',#236801,#236802); +#236801 = CARTESIAN_POINT('',(134.524443,-65.836853,1.51)); +#236802 = VECTOR('',#236803,1.); +#236803 = DIRECTION('',(0.,0.,1.)); +#236804 = ORIENTED_EDGE('',*,*,#236805,.T.); +#236805 = EDGE_CURVE('',#236798,#236806,#236808,.T.); +#236806 = VERTEX_POINT('',#236807); +#236807 = CARTESIAN_POINT('',(134.560491,-65.821921,1.545)); +#236808 = LINE('',#236809,#236810); +#236809 = CARTESIAN_POINT('',(134.524443,-65.836853,1.545)); +#236810 = VECTOR('',#236811,1.); +#236811 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236812 = ORIENTED_EDGE('',*,*,#236813,.F.); +#236813 = EDGE_CURVE('',#236814,#236806,#236816,.T.); +#236814 = VERTEX_POINT('',#236815); +#236815 = CARTESIAN_POINT('',(134.560491,-65.821921,1.51)); +#236816 = LINE('',#236817,#236818); +#236817 = CARTESIAN_POINT('',(134.560491,-65.821921,1.51)); +#236818 = VECTOR('',#236819,1.); +#236819 = DIRECTION('',(0.,0.,1.)); +#236820 = ORIENTED_EDGE('',*,*,#236821,.F.); +#236821 = EDGE_CURVE('',#236796,#236814,#236822,.T.); +#236822 = LINE('',#236823,#236824); +#236823 = CARTESIAN_POINT('',(134.524443,-65.836853,1.51)); +#236824 = VECTOR('',#236825,1.); +#236825 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236826 = PLANE('',#236827); +#236827 = AXIS2_PLACEMENT_3D('',#236828,#236829,#236830); +#236828 = CARTESIAN_POINT('',(134.524443,-65.836853,1.51)); +#236829 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#236830 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#236831 = ADVANCED_FACE('',(#236832),#236857,.T.); +#236832 = FACE_BOUND('',#236833,.T.); +#236833 = EDGE_LOOP('',(#236834,#236835,#236843,#236851)); +#236834 = ORIENTED_EDGE('',*,*,#236813,.T.); +#236835 = ORIENTED_EDGE('',*,*,#236836,.T.); +#236836 = EDGE_CURVE('',#236806,#236837,#236839,.T.); +#236837 = VERTEX_POINT('',#236838); +#236838 = CARTESIAN_POINT('',(146.769509,-65.821921,1.545)); +#236839 = LINE('',#236840,#236841); +#236840 = CARTESIAN_POINT('',(134.560491,-65.821921,1.545)); +#236841 = VECTOR('',#236842,1.); +#236842 = DIRECTION('',(1.,0.,0.)); +#236843 = ORIENTED_EDGE('',*,*,#236844,.F.); +#236844 = EDGE_CURVE('',#236845,#236837,#236847,.T.); +#236845 = VERTEX_POINT('',#236846); +#236846 = CARTESIAN_POINT('',(146.769509,-65.821921,1.51)); +#236847 = LINE('',#236848,#236849); +#236848 = CARTESIAN_POINT('',(146.769509,-65.821921,1.51)); +#236849 = VECTOR('',#236850,1.); +#236850 = DIRECTION('',(0.,0.,1.)); +#236851 = ORIENTED_EDGE('',*,*,#236852,.F.); +#236852 = EDGE_CURVE('',#236814,#236845,#236853,.T.); +#236853 = LINE('',#236854,#236855); +#236854 = CARTESIAN_POINT('',(134.560491,-65.821921,1.51)); +#236855 = VECTOR('',#236856,1.); +#236856 = DIRECTION('',(1.,0.,0.)); +#236857 = PLANE('',#236858); +#236858 = AXIS2_PLACEMENT_3D('',#236859,#236860,#236861); +#236859 = CARTESIAN_POINT('',(134.560491,-65.821921,1.51)); +#236860 = DIRECTION('',(0.,1.,0.)); +#236861 = DIRECTION('',(1.,0.,0.)); +#236862 = ADVANCED_FACE('',(#236863),#236890,.T.); +#236863 = FACE_BOUND('',#236864,.T.); +#236864 = EDGE_LOOP('',(#236865,#236866,#236875,#236883)); +#236865 = ORIENTED_EDGE('',*,*,#236844,.T.); +#236866 = ORIENTED_EDGE('',*,*,#236867,.T.); +#236867 = EDGE_CURVE('',#236837,#236868,#236870,.T.); +#236868 = VERTEX_POINT('',#236869); +#236869 = CARTESIAN_POINT('',(146.769509,-66.018079,1.545)); +#236870 = CIRCLE('',#236871,0.100000456609); +#236871 = AXIS2_PLACEMENT_3D('',#236872,#236873,#236874); +#236872 = CARTESIAN_POINT('',(146.75,-65.92,1.545)); +#236873 = DIRECTION('',(0.,0.,-1.)); +#236874 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#236875 = ORIENTED_EDGE('',*,*,#236876,.F.); +#236876 = EDGE_CURVE('',#236877,#236868,#236879,.T.); +#236877 = VERTEX_POINT('',#236878); +#236878 = CARTESIAN_POINT('',(146.769509,-66.018079,1.51)); +#236879 = LINE('',#236880,#236881); +#236880 = CARTESIAN_POINT('',(146.769509,-66.018079,1.51)); +#236881 = VECTOR('',#236882,1.); +#236882 = DIRECTION('',(0.,0.,1.)); +#236883 = ORIENTED_EDGE('',*,*,#236884,.F.); +#236884 = EDGE_CURVE('',#236845,#236877,#236885,.T.); +#236885 = CIRCLE('',#236886,0.100000456609); +#236886 = AXIS2_PLACEMENT_3D('',#236887,#236888,#236889); +#236887 = CARTESIAN_POINT('',(146.75,-65.92,1.51)); +#236888 = DIRECTION('',(0.,0.,-1.)); +#236889 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#236890 = CYLINDRICAL_SURFACE('',#236891,0.100000456609); +#236891 = AXIS2_PLACEMENT_3D('',#236892,#236893,#236894); +#236892 = CARTESIAN_POINT('',(146.75,-65.92,1.51)); +#236893 = DIRECTION('',(0.,0.,-1.)); +#236894 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#236895 = ADVANCED_FACE('',(#236896),#236921,.T.); +#236896 = FACE_BOUND('',#236897,.T.); +#236897 = EDGE_LOOP('',(#236898,#236899,#236907,#236915)); +#236898 = ORIENTED_EDGE('',*,*,#236876,.T.); +#236899 = ORIENTED_EDGE('',*,*,#236900,.T.); +#236900 = EDGE_CURVE('',#236868,#236901,#236903,.T.); +#236901 = VERTEX_POINT('',#236902); +#236902 = CARTESIAN_POINT('',(134.621421,-66.02,1.545)); +#236903 = LINE('',#236904,#236905); +#236904 = CARTESIAN_POINT('',(146.769509,-66.018079,1.545)); +#236905 = VECTOR('',#236906,1.); +#236906 = DIRECTION('',(-0.999999987497,-1.581318785292E-04,0.)); +#236907 = ORIENTED_EDGE('',*,*,#236908,.F.); +#236908 = EDGE_CURVE('',#236909,#236901,#236911,.T.); +#236909 = VERTEX_POINT('',#236910); +#236910 = CARTESIAN_POINT('',(134.621421,-66.02,1.51)); +#236911 = LINE('',#236912,#236913); +#236912 = CARTESIAN_POINT('',(134.621421,-66.02,1.51)); +#236913 = VECTOR('',#236914,1.); +#236914 = DIRECTION('',(0.,0.,1.)); +#236915 = ORIENTED_EDGE('',*,*,#236916,.F.); +#236916 = EDGE_CURVE('',#236877,#236909,#236917,.T.); +#236917 = LINE('',#236918,#236919); +#236918 = CARTESIAN_POINT('',(146.769509,-66.018079,1.51)); +#236919 = VECTOR('',#236920,1.); +#236920 = DIRECTION('',(-0.999999987497,-1.581318785292E-04,0.)); +#236921 = PLANE('',#236922); +#236922 = AXIS2_PLACEMENT_3D('',#236923,#236924,#236925); +#236923 = CARTESIAN_POINT('',(146.769509,-66.018079,1.51)); +#236924 = DIRECTION('',(1.581318785292E-04,-0.999999987497,0.)); +#236925 = DIRECTION('',(-0.999999987497,-1.581318785292E-04,0.)); +#236926 = ADVANCED_FACE('',(#236927),#236952,.T.); +#236927 = FACE_BOUND('',#236928,.T.); +#236928 = EDGE_LOOP('',(#236929,#236930,#236938,#236946)); +#236929 = ORIENTED_EDGE('',*,*,#236908,.T.); +#236930 = ORIENTED_EDGE('',*,*,#236931,.T.); +#236931 = EDGE_CURVE('',#236901,#236932,#236934,.T.); +#236932 = VERTEX_POINT('',#236933); +#236933 = CARTESIAN_POINT('',(133.45,-67.191421,1.545)); +#236934 = LINE('',#236935,#236936); +#236935 = CARTESIAN_POINT('',(134.621421,-66.02,1.545)); +#236936 = VECTOR('',#236937,1.); +#236937 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#236938 = ORIENTED_EDGE('',*,*,#236939,.F.); +#236939 = EDGE_CURVE('',#236940,#236932,#236942,.T.); +#236940 = VERTEX_POINT('',#236941); +#236941 = CARTESIAN_POINT('',(133.45,-67.191421,1.51)); +#236942 = LINE('',#236943,#236944); +#236943 = CARTESIAN_POINT('',(133.45,-67.191421,1.51)); +#236944 = VECTOR('',#236945,1.); +#236945 = DIRECTION('',(0.,0.,1.)); +#236946 = ORIENTED_EDGE('',*,*,#236947,.F.); +#236947 = EDGE_CURVE('',#236909,#236940,#236948,.T.); +#236948 = LINE('',#236949,#236950); +#236949 = CARTESIAN_POINT('',(134.621421,-66.02,1.51)); +#236950 = VECTOR('',#236951,1.); +#236951 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#236952 = PLANE('',#236953); +#236953 = AXIS2_PLACEMENT_3D('',#236954,#236955,#236956); +#236954 = CARTESIAN_POINT('',(134.621421,-66.02,1.51)); +#236955 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#236956 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#236957 = ADVANCED_FACE('',(#236958),#236983,.T.); +#236958 = FACE_BOUND('',#236959,.T.); +#236959 = EDGE_LOOP('',(#236960,#236961,#236969,#236977)); +#236960 = ORIENTED_EDGE('',*,*,#236939,.T.); +#236961 = ORIENTED_EDGE('',*,*,#236962,.T.); +#236962 = EDGE_CURVE('',#236932,#236963,#236965,.T.); +#236963 = VERTEX_POINT('',#236964); +#236964 = CARTESIAN_POINT('',(133.45,-69.718869,1.545)); +#236965 = LINE('',#236966,#236967); +#236966 = CARTESIAN_POINT('',(133.45,-67.191421,1.545)); +#236967 = VECTOR('',#236968,1.); +#236968 = DIRECTION('',(0.,-1.,0.)); +#236969 = ORIENTED_EDGE('',*,*,#236970,.F.); +#236970 = EDGE_CURVE('',#236971,#236963,#236973,.T.); +#236971 = VERTEX_POINT('',#236972); +#236972 = CARTESIAN_POINT('',(133.45,-69.718869,1.51)); +#236973 = LINE('',#236974,#236975); +#236974 = CARTESIAN_POINT('',(133.45,-69.718869,1.51)); +#236975 = VECTOR('',#236976,1.); +#236976 = DIRECTION('',(0.,0.,1.)); +#236977 = ORIENTED_EDGE('',*,*,#236978,.F.); +#236978 = EDGE_CURVE('',#236940,#236971,#236979,.T.); +#236979 = LINE('',#236980,#236981); +#236980 = CARTESIAN_POINT('',(133.45,-67.191421,1.51)); +#236981 = VECTOR('',#236982,1.); +#236982 = DIRECTION('',(0.,-1.,0.)); +#236983 = PLANE('',#236984); +#236984 = AXIS2_PLACEMENT_3D('',#236985,#236986,#236987); +#236985 = CARTESIAN_POINT('',(133.45,-67.191421,1.51)); +#236986 = DIRECTION('',(1.,0.,-0.)); +#236987 = DIRECTION('',(0.,-1.,0.)); +#236988 = ADVANCED_FACE('',(#236989),#237014,.T.); +#236989 = FACE_BOUND('',#236990,.T.); +#236990 = EDGE_LOOP('',(#236991,#236992,#237000,#237008)); +#236991 = ORIENTED_EDGE('',*,*,#236970,.T.); +#236992 = ORIENTED_EDGE('',*,*,#236993,.T.); +#236993 = EDGE_CURVE('',#236963,#236994,#236996,.T.); +#236994 = VERTEX_POINT('',#236995); +#236995 = CARTESIAN_POINT('',(133.464805,-69.722836,1.545)); +#236996 = LINE('',#236997,#236998); +#236997 = CARTESIAN_POINT('',(133.45,-69.718869,1.545)); +#236998 = VECTOR('',#236999,1.); +#236999 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#237000 = ORIENTED_EDGE('',*,*,#237001,.F.); +#237001 = EDGE_CURVE('',#237002,#236994,#237004,.T.); +#237002 = VERTEX_POINT('',#237003); +#237003 = CARTESIAN_POINT('',(133.464805,-69.722836,1.51)); +#237004 = LINE('',#237005,#237006); +#237005 = CARTESIAN_POINT('',(133.464805,-69.722836,1.51)); +#237006 = VECTOR('',#237007,1.); +#237007 = DIRECTION('',(0.,0.,1.)); +#237008 = ORIENTED_EDGE('',*,*,#237009,.F.); +#237009 = EDGE_CURVE('',#236971,#237002,#237010,.T.); +#237010 = LINE('',#237011,#237012); +#237011 = CARTESIAN_POINT('',(133.45,-69.718869,1.51)); +#237012 = VECTOR('',#237013,1.); +#237013 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#237014 = PLANE('',#237015); +#237015 = AXIS2_PLACEMENT_3D('',#237016,#237017,#237018); +#237016 = CARTESIAN_POINT('',(133.45,-69.718869,1.51)); +#237017 = DIRECTION('',(0.258819788118,0.965925627198,-0.)); +#237018 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#237019 = ADVANCED_FACE('',(#237020),#237047,.T.); +#237020 = FACE_BOUND('',#237021,.T.); +#237021 = EDGE_LOOP('',(#237022,#237023,#237032,#237040)); +#237022 = ORIENTED_EDGE('',*,*,#237001,.T.); +#237023 = ORIENTED_EDGE('',*,*,#237024,.T.); +#237024 = EDGE_CURVE('',#236994,#237025,#237027,.T.); +#237025 = VERTEX_POINT('',#237026); +#237026 = CARTESIAN_POINT('',(133.235195,-69.722836,1.545)); +#237027 = CIRCLE('',#237028,0.299999850918); +#237028 = AXIS2_PLACEMENT_3D('',#237029,#237030,#237031); +#237029 = CARTESIAN_POINT('',(133.35,-69.99999971069,1.545)); +#237030 = DIRECTION('',(0.,0.,-1.)); +#237031 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#237032 = ORIENTED_EDGE('',*,*,#237033,.F.); +#237033 = EDGE_CURVE('',#237034,#237025,#237036,.T.); +#237034 = VERTEX_POINT('',#237035); +#237035 = CARTESIAN_POINT('',(133.235195,-69.722836,1.51)); +#237036 = LINE('',#237037,#237038); +#237037 = CARTESIAN_POINT('',(133.235195,-69.722836,1.51)); +#237038 = VECTOR('',#237039,1.); +#237039 = DIRECTION('',(0.,0.,1.)); +#237040 = ORIENTED_EDGE('',*,*,#237041,.F.); +#237041 = EDGE_CURVE('',#237002,#237034,#237042,.T.); +#237042 = CIRCLE('',#237043,0.299999850918); +#237043 = AXIS2_PLACEMENT_3D('',#237044,#237045,#237046); +#237044 = CARTESIAN_POINT('',(133.35,-69.99999971069,1.51)); +#237045 = DIRECTION('',(0.,0.,-1.)); +#237046 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#237047 = CYLINDRICAL_SURFACE('',#237048,0.299999850918); +#237048 = AXIS2_PLACEMENT_3D('',#237049,#237050,#237051); +#237049 = CARTESIAN_POINT('',(133.35,-69.99999971069,1.51)); +#237050 = DIRECTION('',(0.,0.,-1.)); +#237051 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#237052 = ADVANCED_FACE('',(#237053),#237078,.T.); +#237053 = FACE_BOUND('',#237054,.T.); +#237054 = EDGE_LOOP('',(#237055,#237056,#237064,#237072)); +#237055 = ORIENTED_EDGE('',*,*,#237033,.T.); +#237056 = ORIENTED_EDGE('',*,*,#237057,.T.); +#237057 = EDGE_CURVE('',#237025,#237058,#237060,.T.); +#237058 = VERTEX_POINT('',#237059); +#237059 = CARTESIAN_POINT('',(133.25,-69.718869,1.545)); +#237060 = LINE('',#237061,#237062); +#237061 = CARTESIAN_POINT('',(133.235195,-69.722836,1.545)); +#237062 = VECTOR('',#237063,1.); +#237063 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#237064 = ORIENTED_EDGE('',*,*,#237065,.F.); +#237065 = EDGE_CURVE('',#237066,#237058,#237068,.T.); +#237066 = VERTEX_POINT('',#237067); +#237067 = CARTESIAN_POINT('',(133.25,-69.718869,1.51)); +#237068 = LINE('',#237069,#237070); +#237069 = CARTESIAN_POINT('',(133.25,-69.718869,1.51)); +#237070 = VECTOR('',#237071,1.); +#237071 = DIRECTION('',(0.,0.,1.)); +#237072 = ORIENTED_EDGE('',*,*,#237073,.F.); +#237073 = EDGE_CURVE('',#237034,#237066,#237074,.T.); +#237074 = LINE('',#237075,#237076); +#237075 = CARTESIAN_POINT('',(133.235195,-69.722836,1.51)); +#237076 = VECTOR('',#237077,1.); +#237077 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#237078 = PLANE('',#237079); +#237079 = AXIS2_PLACEMENT_3D('',#237080,#237081,#237082); +#237080 = CARTESIAN_POINT('',(133.235195,-69.722836,1.51)); +#237081 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#237082 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#237083 = ADVANCED_FACE('',(#237084),#237109,.T.); +#237084 = FACE_BOUND('',#237085,.T.); +#237085 = EDGE_LOOP('',(#237086,#237087,#237095,#237103)); +#237086 = ORIENTED_EDGE('',*,*,#237065,.T.); +#237087 = ORIENTED_EDGE('',*,*,#237088,.T.); +#237088 = EDGE_CURVE('',#237058,#237089,#237091,.T.); +#237089 = VERTEX_POINT('',#237090); +#237090 = CARTESIAN_POINT('',(133.251921,-67.130491,1.545)); +#237091 = LINE('',#237092,#237093); +#237092 = CARTESIAN_POINT('',(133.25,-69.718869,1.545)); +#237093 = VECTOR('',#237094,1.); +#237094 = DIRECTION('',(7.421634208606E-04,0.999999724597,0.)); +#237095 = ORIENTED_EDGE('',*,*,#237096,.F.); +#237096 = EDGE_CURVE('',#237097,#237089,#237099,.T.); +#237097 = VERTEX_POINT('',#237098); +#237098 = CARTESIAN_POINT('',(133.251921,-67.130491,1.51)); +#237099 = LINE('',#237100,#237101); +#237100 = CARTESIAN_POINT('',(133.251921,-67.130491,1.51)); +#237101 = VECTOR('',#237102,1.); +#237102 = DIRECTION('',(0.,0.,1.)); +#237103 = ORIENTED_EDGE('',*,*,#237104,.F.); +#237104 = EDGE_CURVE('',#237066,#237097,#237105,.T.); +#237105 = LINE('',#237106,#237107); +#237106 = CARTESIAN_POINT('',(133.25,-69.718869,1.51)); +#237107 = VECTOR('',#237108,1.); +#237108 = DIRECTION('',(7.421634208606E-04,0.999999724597,0.)); +#237109 = PLANE('',#237110); +#237110 = AXIS2_PLACEMENT_3D('',#237111,#237112,#237113); +#237111 = CARTESIAN_POINT('',(133.25,-69.718869,1.51)); +#237112 = DIRECTION('',(-0.999999724597,7.421634208606E-04,0.)); +#237113 = DIRECTION('',(7.421634208606E-04,0.999999724597,0.)); +#237114 = ADVANCED_FACE('',(#237115),#237140,.T.); +#237115 = FACE_BOUND('',#237116,.T.); +#237116 = EDGE_LOOP('',(#237117,#237118,#237126,#237134)); +#237117 = ORIENTED_EDGE('',*,*,#237096,.T.); +#237118 = ORIENTED_EDGE('',*,*,#237119,.T.); +#237119 = EDGE_CURVE('',#237089,#237120,#237122,.T.); +#237120 = VERTEX_POINT('',#237121); +#237121 = CARTESIAN_POINT('',(133.266853,-67.094443,1.545)); +#237122 = LINE('',#237123,#237124); +#237123 = CARTESIAN_POINT('',(133.251921,-67.130491,1.545)); +#237124 = VECTOR('',#237125,1.); +#237125 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#237126 = ORIENTED_EDGE('',*,*,#237127,.F.); +#237127 = EDGE_CURVE('',#237128,#237120,#237130,.T.); +#237128 = VERTEX_POINT('',#237129); +#237129 = CARTESIAN_POINT('',(133.266853,-67.094443,1.51)); +#237130 = LINE('',#237131,#237132); +#237131 = CARTESIAN_POINT('',(133.266853,-67.094443,1.51)); +#237132 = VECTOR('',#237133,1.); +#237133 = DIRECTION('',(0.,0.,1.)); +#237134 = ORIENTED_EDGE('',*,*,#237135,.F.); +#237135 = EDGE_CURVE('',#237097,#237128,#237136,.T.); +#237136 = LINE('',#237137,#237138); +#237137 = CARTESIAN_POINT('',(133.251921,-67.130491,1.51)); +#237138 = VECTOR('',#237139,1.); +#237139 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#237140 = PLANE('',#237141); +#237141 = AXIS2_PLACEMENT_3D('',#237142,#237143,#237144); +#237142 = CARTESIAN_POINT('',(133.251921,-67.130491,1.51)); +#237143 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#237144 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#237145 = ADVANCED_FACE('',(#237146),#237162,.T.); +#237146 = FACE_BOUND('',#237147,.T.); +#237147 = EDGE_LOOP('',(#237148,#237149,#237155,#237156)); +#237148 = ORIENTED_EDGE('',*,*,#237127,.T.); +#237149 = ORIENTED_EDGE('',*,*,#237150,.T.); +#237150 = EDGE_CURVE('',#237120,#236798,#237151,.T.); +#237151 = LINE('',#237152,#237153); +#237152 = CARTESIAN_POINT('',(133.266853,-67.094443,1.545)); +#237153 = VECTOR('',#237154,1.); +#237154 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#237155 = ORIENTED_EDGE('',*,*,#236795,.F.); +#237156 = ORIENTED_EDGE('',*,*,#237157,.F.); +#237157 = EDGE_CURVE('',#237128,#236796,#237158,.T.); +#237158 = LINE('',#237159,#237160); +#237159 = CARTESIAN_POINT('',(133.266853,-67.094443,1.51)); +#237160 = VECTOR('',#237161,1.); +#237161 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#237162 = PLANE('',#237163); +#237163 = AXIS2_PLACEMENT_3D('',#237164,#237165,#237166); +#237164 = CARTESIAN_POINT('',(133.266853,-67.094443,1.51)); +#237165 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#237166 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#237167 = ADVANCED_FACE('',(#237168),#237195,.F.); +#237168 = FACE_BOUND('',#237169,.T.); +#237169 = EDGE_LOOP('',(#237170,#237180,#237187,#237188)); +#237170 = ORIENTED_EDGE('',*,*,#237171,.T.); +#237171 = EDGE_CURVE('',#237172,#237174,#237176,.T.); +#237172 = VERTEX_POINT('',#237173); +#237173 = CARTESIAN_POINT('',(133.487255,-70.,1.51)); +#237174 = VERTEX_POINT('',#237175); +#237175 = CARTESIAN_POINT('',(133.487255,-70.,1.545)); +#237176 = LINE('',#237177,#237178); +#237177 = CARTESIAN_POINT('',(133.487255,-70.,1.51)); +#237178 = VECTOR('',#237179,1.); +#237179 = DIRECTION('',(0.,0.,1.)); +#237180 = ORIENTED_EDGE('',*,*,#237181,.T.); +#237181 = EDGE_CURVE('',#237174,#237174,#237182,.T.); +#237182 = CIRCLE('',#237183,0.137255); +#237183 = AXIS2_PLACEMENT_3D('',#237184,#237185,#237186); +#237184 = CARTESIAN_POINT('',(133.35,-70.,1.545)); +#237185 = DIRECTION('',(0.,0.,1.)); +#237186 = DIRECTION('',(1.,0.,-0.)); +#237187 = ORIENTED_EDGE('',*,*,#237171,.F.); +#237188 = ORIENTED_EDGE('',*,*,#237189,.F.); +#237189 = EDGE_CURVE('',#237172,#237172,#237190,.T.); +#237190 = CIRCLE('',#237191,0.137255); +#237191 = AXIS2_PLACEMENT_3D('',#237192,#237193,#237194); +#237192 = CARTESIAN_POINT('',(133.35,-70.,1.51)); +#237193 = DIRECTION('',(0.,0.,1.)); +#237194 = DIRECTION('',(1.,0.,-0.)); +#237195 = CYLINDRICAL_SURFACE('',#237196,0.137255); +#237196 = AXIS2_PLACEMENT_3D('',#237197,#237198,#237199); +#237197 = CARTESIAN_POINT('',(133.35,-70.,1.51)); +#237198 = DIRECTION('',(-0.,-0.,-1.)); +#237199 = DIRECTION('',(1.,0.,-0.)); +#237200 = ADVANCED_FACE('',(#237201,#237215),#237218,.F.); +#237201 = FACE_BOUND('',#237202,.T.); +#237202 = EDGE_LOOP('',(#237203,#237204,#237205,#237206,#237207,#237208, + #237209,#237210,#237211,#237212,#237213,#237214)); +#237203 = ORIENTED_EDGE('',*,*,#236821,.T.); +#237204 = ORIENTED_EDGE('',*,*,#236852,.T.); +#237205 = ORIENTED_EDGE('',*,*,#236884,.T.); +#237206 = ORIENTED_EDGE('',*,*,#236916,.T.); +#237207 = ORIENTED_EDGE('',*,*,#236947,.T.); +#237208 = ORIENTED_EDGE('',*,*,#236978,.T.); +#237209 = ORIENTED_EDGE('',*,*,#237009,.T.); +#237210 = ORIENTED_EDGE('',*,*,#237041,.T.); +#237211 = ORIENTED_EDGE('',*,*,#237073,.T.); +#237212 = ORIENTED_EDGE('',*,*,#237104,.T.); +#237213 = ORIENTED_EDGE('',*,*,#237135,.T.); +#237214 = ORIENTED_EDGE('',*,*,#237157,.T.); +#237215 = FACE_BOUND('',#237216,.T.); +#237216 = EDGE_LOOP('',(#237217)); +#237217 = ORIENTED_EDGE('',*,*,#237189,.T.); +#237218 = PLANE('',#237219); +#237219 = AXIS2_PLACEMENT_3D('',#237220,#237221,#237222); +#237220 = CARTESIAN_POINT('',(0.,0.,1.51)); +#237221 = DIRECTION('',(0.,0.,1.)); +#237222 = DIRECTION('',(1.,0.,-0.)); +#237223 = ADVANCED_FACE('',(#237224,#237238),#237241,.T.); +#237224 = FACE_BOUND('',#237225,.F.); +#237225 = EDGE_LOOP('',(#237226,#237227,#237228,#237229,#237230,#237231, + #237232,#237233,#237234,#237235,#237236,#237237)); +#237226 = ORIENTED_EDGE('',*,*,#236805,.T.); +#237227 = ORIENTED_EDGE('',*,*,#236836,.T.); +#237228 = ORIENTED_EDGE('',*,*,#236867,.T.); +#237229 = ORIENTED_EDGE('',*,*,#236900,.T.); +#237230 = ORIENTED_EDGE('',*,*,#236931,.T.); +#237231 = ORIENTED_EDGE('',*,*,#236962,.T.); +#237232 = ORIENTED_EDGE('',*,*,#236993,.T.); +#237233 = ORIENTED_EDGE('',*,*,#237024,.T.); +#237234 = ORIENTED_EDGE('',*,*,#237057,.T.); +#237235 = ORIENTED_EDGE('',*,*,#237088,.T.); +#237236 = ORIENTED_EDGE('',*,*,#237119,.T.); +#237237 = ORIENTED_EDGE('',*,*,#237150,.T.); +#237238 = FACE_BOUND('',#237239,.F.); +#237239 = EDGE_LOOP('',(#237240)); +#237240 = ORIENTED_EDGE('',*,*,#237181,.T.); +#237241 = PLANE('',#237242); +#237242 = AXIS2_PLACEMENT_3D('',#237243,#237244,#237245); +#237243 = CARTESIAN_POINT('',(0.,0.,1.545)); +#237244 = DIRECTION('',(0.,0.,1.)); +#237245 = DIRECTION('',(1.,0.,-0.)); +#237246 = MANIFOLD_SOLID_BREP('',#237247); +#237247 = CLOSED_SHELL('',(#237248,#237288,#237319,#237352,#237383, + #237414,#237445,#237476,#237507,#237538,#237569,#237600,#237631, + #237662,#237693,#237724,#237755,#237786,#237819,#237850,#237881, + #237912,#237943,#237974,#238005,#238036,#238067,#238098,#238129, + #238160,#238182,#238215,#238256)); +#237248 = ADVANCED_FACE('',(#237249),#237283,.F.); +#237249 = FACE_BOUND('',#237250,.F.); +#237250 = EDGE_LOOP('',(#237251,#237261,#237269,#237277)); +#237251 = ORIENTED_EDGE('',*,*,#237252,.T.); +#237252 = EDGE_CURVE('',#237253,#237255,#237257,.T.); +#237253 = VERTEX_POINT('',#237254); +#237254 = CARTESIAN_POINT('',(131.217829,-118.516853,0.)); +#237255 = VERTEX_POINT('',#237256); +#237256 = CARTESIAN_POINT('',(131.217829,-118.516853,-3.5E-02)); +#237257 = LINE('',#237258,#237259); +#237258 = CARTESIAN_POINT('',(131.217829,-118.516853,0.)); +#237259 = VECTOR('',#237260,1.); +#237260 = DIRECTION('',(0.,0.,-1.)); +#237261 = ORIENTED_EDGE('',*,*,#237262,.T.); +#237262 = EDGE_CURVE('',#237255,#237263,#237265,.T.); +#237263 = VERTEX_POINT('',#237264); +#237264 = CARTESIAN_POINT('',(131.253877,-118.501921,-3.5E-02)); +#237265 = LINE('',#237266,#237267); +#237266 = CARTESIAN_POINT('',(131.217829,-118.516853,-3.5E-02)); +#237267 = VECTOR('',#237268,1.); +#237268 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#237269 = ORIENTED_EDGE('',*,*,#237270,.F.); +#237270 = EDGE_CURVE('',#237271,#237263,#237273,.T.); +#237271 = VERTEX_POINT('',#237272); +#237272 = CARTESIAN_POINT('',(131.253877,-118.501921,0.)); +#237273 = LINE('',#237274,#237275); +#237274 = CARTESIAN_POINT('',(131.253877,-118.501921,0.)); +#237275 = VECTOR('',#237276,1.); +#237276 = DIRECTION('',(0.,0.,-1.)); +#237277 = ORIENTED_EDGE('',*,*,#237278,.F.); +#237278 = EDGE_CURVE('',#237253,#237271,#237279,.T.); +#237279 = LINE('',#237280,#237281); +#237280 = CARTESIAN_POINT('',(131.217829,-118.516853,0.)); +#237281 = VECTOR('',#237282,1.); +#237282 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#237283 = PLANE('',#237284); +#237284 = AXIS2_PLACEMENT_3D('',#237285,#237286,#237287); +#237285 = CARTESIAN_POINT('',(131.217829,-118.516853,0.)); +#237286 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#237287 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#237288 = ADVANCED_FACE('',(#237289),#237314,.F.); +#237289 = FACE_BOUND('',#237290,.F.); +#237290 = EDGE_LOOP('',(#237291,#237292,#237300,#237308)); +#237291 = ORIENTED_EDGE('',*,*,#237270,.T.); +#237292 = ORIENTED_EDGE('',*,*,#237293,.T.); +#237293 = EDGE_CURVE('',#237263,#237294,#237296,.T.); +#237294 = VERTEX_POINT('',#237295); +#237295 = CARTESIAN_POINT('',(131.969509,-118.501921,-3.5E-02)); +#237296 = LINE('',#237297,#237298); +#237297 = CARTESIAN_POINT('',(131.253877,-118.501921,-3.5E-02)); +#237298 = VECTOR('',#237299,1.); +#237299 = DIRECTION('',(1.,0.,0.)); +#237300 = ORIENTED_EDGE('',*,*,#237301,.F.); +#237301 = EDGE_CURVE('',#237302,#237294,#237304,.T.); +#237302 = VERTEX_POINT('',#237303); +#237303 = CARTESIAN_POINT('',(131.969509,-118.501921,0.)); +#237304 = LINE('',#237305,#237306); +#237305 = CARTESIAN_POINT('',(131.969509,-118.501921,0.)); +#237306 = VECTOR('',#237307,1.); +#237307 = DIRECTION('',(0.,0.,-1.)); +#237308 = ORIENTED_EDGE('',*,*,#237309,.F.); +#237309 = EDGE_CURVE('',#237271,#237302,#237310,.T.); +#237310 = LINE('',#237311,#237312); +#237311 = CARTESIAN_POINT('',(131.253877,-118.501921,0.)); +#237312 = VECTOR('',#237313,1.); +#237313 = DIRECTION('',(1.,0.,0.)); +#237314 = PLANE('',#237315); +#237315 = AXIS2_PLACEMENT_3D('',#237316,#237317,#237318); +#237316 = CARTESIAN_POINT('',(131.253877,-118.501921,0.)); +#237317 = DIRECTION('',(0.,-1.,0.)); +#237318 = DIRECTION('',(1.,0.,0.)); +#237319 = ADVANCED_FACE('',(#237320),#237347,.T.); +#237320 = FACE_BOUND('',#237321,.F.); +#237321 = EDGE_LOOP('',(#237322,#237323,#237332,#237340)); +#237322 = ORIENTED_EDGE('',*,*,#237301,.T.); +#237323 = ORIENTED_EDGE('',*,*,#237324,.T.); +#237324 = EDGE_CURVE('',#237294,#237325,#237327,.T.); +#237325 = VERTEX_POINT('',#237326); +#237326 = CARTESIAN_POINT('',(131.969509,-118.698079,-3.5E-02)); +#237327 = CIRCLE('',#237328,0.100000456609); +#237328 = AXIS2_PLACEMENT_3D('',#237329,#237330,#237331); +#237329 = CARTESIAN_POINT('',(131.95,-118.6,-3.5E-02)); +#237330 = DIRECTION('',(0.,0.,-1.)); +#237331 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#237332 = ORIENTED_EDGE('',*,*,#237333,.F.); +#237333 = EDGE_CURVE('',#237334,#237325,#237336,.T.); +#237334 = VERTEX_POINT('',#237335); +#237335 = CARTESIAN_POINT('',(131.969509,-118.698079,0.)); +#237336 = LINE('',#237337,#237338); +#237337 = CARTESIAN_POINT('',(131.969509,-118.698079,0.)); +#237338 = VECTOR('',#237339,1.); +#237339 = DIRECTION('',(0.,0.,-1.)); +#237340 = ORIENTED_EDGE('',*,*,#237341,.F.); +#237341 = EDGE_CURVE('',#237302,#237334,#237342,.T.); +#237342 = CIRCLE('',#237343,0.100000456609); +#237343 = AXIS2_PLACEMENT_3D('',#237344,#237345,#237346); +#237344 = CARTESIAN_POINT('',(131.95,-118.6,0.)); +#237345 = DIRECTION('',(0.,0.,-1.)); +#237346 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#237347 = CYLINDRICAL_SURFACE('',#237348,0.100000456609); +#237348 = AXIS2_PLACEMENT_3D('',#237349,#237350,#237351); +#237349 = CARTESIAN_POINT('',(131.95,-118.6,0.)); +#237350 = DIRECTION('',(-0.,-0.,1.)); +#237351 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#237352 = ADVANCED_FACE('',(#237353),#237378,.F.); +#237353 = FACE_BOUND('',#237354,.F.); +#237354 = EDGE_LOOP('',(#237355,#237356,#237364,#237372)); +#237355 = ORIENTED_EDGE('',*,*,#237333,.T.); +#237356 = ORIENTED_EDGE('',*,*,#237357,.T.); +#237357 = EDGE_CURVE('',#237325,#237358,#237360,.T.); +#237358 = VERTEX_POINT('',#237359); +#237359 = CARTESIAN_POINT('',(131.314808,-118.7,-3.5E-02)); +#237360 = LINE('',#237361,#237362); +#237361 = CARTESIAN_POINT('',(131.969509,-118.698079,-3.5E-02)); +#237362 = VECTOR('',#237363,1.); +#237363 = DIRECTION('',(-0.999995695369,-2.934151209178E-03,0.)); +#237364 = ORIENTED_EDGE('',*,*,#237365,.F.); +#237365 = EDGE_CURVE('',#237366,#237358,#237368,.T.); +#237366 = VERTEX_POINT('',#237367); +#237367 = CARTESIAN_POINT('',(131.314808,-118.7,0.)); +#237368 = LINE('',#237369,#237370); +#237369 = CARTESIAN_POINT('',(131.314808,-118.7,0.)); +#237370 = VECTOR('',#237371,1.); +#237371 = DIRECTION('',(0.,0.,-1.)); +#237372 = ORIENTED_EDGE('',*,*,#237373,.F.); +#237373 = EDGE_CURVE('',#237334,#237366,#237374,.T.); +#237374 = LINE('',#237375,#237376); +#237375 = CARTESIAN_POINT('',(131.969509,-118.698079,0.)); +#237376 = VECTOR('',#237377,1.); +#237377 = DIRECTION('',(-0.999995695369,-2.934151209178E-03,0.)); +#237378 = PLANE('',#237379); +#237379 = AXIS2_PLACEMENT_3D('',#237380,#237381,#237382); +#237380 = CARTESIAN_POINT('',(131.969509,-118.698079,0.)); +#237381 = DIRECTION('',(-2.934151209178E-03,0.999995695369,0.)); +#237382 = DIRECTION('',(-0.999995695369,-2.934151209178E-03,0.)); +#237383 = ADVANCED_FACE('',(#237384),#237409,.F.); +#237384 = FACE_BOUND('',#237385,.F.); +#237385 = EDGE_LOOP('',(#237386,#237387,#237395,#237403)); +#237386 = ORIENTED_EDGE('',*,*,#237365,.T.); +#237387 = ORIENTED_EDGE('',*,*,#237388,.T.); +#237388 = EDGE_CURVE('',#237358,#237389,#237391,.T.); +#237389 = VERTEX_POINT('',#237390); +#237390 = CARTESIAN_POINT('',(130.7,-119.314807,-3.5E-02)); +#237391 = LINE('',#237392,#237393); +#237392 = CARTESIAN_POINT('',(131.314808,-118.7,-3.5E-02)); +#237393 = VECTOR('',#237394,1.); +#237394 = DIRECTION('',(-0.70710735625,-0.707106206123,0.)); +#237395 = ORIENTED_EDGE('',*,*,#237396,.F.); +#237396 = EDGE_CURVE('',#237397,#237389,#237399,.T.); +#237397 = VERTEX_POINT('',#237398); +#237398 = CARTESIAN_POINT('',(130.7,-119.314807,0.)); +#237399 = LINE('',#237400,#237401); +#237400 = CARTESIAN_POINT('',(130.7,-119.314807,0.)); +#237401 = VECTOR('',#237402,1.); +#237402 = DIRECTION('',(0.,0.,-1.)); +#237403 = ORIENTED_EDGE('',*,*,#237404,.F.); +#237404 = EDGE_CURVE('',#237366,#237397,#237405,.T.); +#237405 = LINE('',#237406,#237407); +#237406 = CARTESIAN_POINT('',(131.314808,-118.7,0.)); +#237407 = VECTOR('',#237408,1.); +#237408 = DIRECTION('',(-0.70710735625,-0.707106206123,0.)); +#237409 = PLANE('',#237410); +#237410 = AXIS2_PLACEMENT_3D('',#237411,#237412,#237413); +#237411 = CARTESIAN_POINT('',(131.314808,-118.7,0.)); +#237412 = DIRECTION('',(-0.707106206123,0.70710735625,0.)); +#237413 = DIRECTION('',(-0.70710735625,-0.707106206123,0.)); +#237414 = ADVANCED_FACE('',(#237415),#237440,.F.); +#237415 = FACE_BOUND('',#237416,.F.); +#237416 = EDGE_LOOP('',(#237417,#237418,#237426,#237434)); +#237417 = ORIENTED_EDGE('',*,*,#237396,.T.); +#237418 = ORIENTED_EDGE('',*,*,#237419,.T.); +#237419 = EDGE_CURVE('',#237389,#237420,#237422,.T.); +#237420 = VERTEX_POINT('',#237421); +#237421 = CARTESIAN_POINT('',(130.698079,-119.439509,-3.5E-02)); +#237422 = LINE('',#237423,#237424); +#237423 = CARTESIAN_POINT('',(130.7,-119.314807,-3.5E-02)); +#237424 = VECTOR('',#237425,1.); +#237425 = DIRECTION('',(-1.540289737584E-02,-0.999881368339,0.)); +#237426 = ORIENTED_EDGE('',*,*,#237427,.F.); +#237427 = EDGE_CURVE('',#237428,#237420,#237430,.T.); +#237428 = VERTEX_POINT('',#237429); +#237429 = CARTESIAN_POINT('',(130.698079,-119.439509,0.)); +#237430 = LINE('',#237431,#237432); +#237431 = CARTESIAN_POINT('',(130.698079,-119.439509,0.)); +#237432 = VECTOR('',#237433,1.); +#237433 = DIRECTION('',(0.,0.,-1.)); +#237434 = ORIENTED_EDGE('',*,*,#237435,.F.); +#237435 = EDGE_CURVE('',#237397,#237428,#237436,.T.); +#237436 = LINE('',#237437,#237438); +#237437 = CARTESIAN_POINT('',(130.7,-119.314807,0.)); +#237438 = VECTOR('',#237439,1.); +#237439 = DIRECTION('',(-1.540289737584E-02,-0.999881368339,0.)); +#237440 = PLANE('',#237441); +#237441 = AXIS2_PLACEMENT_3D('',#237442,#237443,#237444); +#237442 = CARTESIAN_POINT('',(130.7,-119.314807,0.)); +#237443 = DIRECTION('',(-0.999881368339,1.540289737584E-02,0.)); +#237444 = DIRECTION('',(-1.540289737584E-02,-0.999881368339,0.)); +#237445 = ADVANCED_FACE('',(#237446),#237471,.F.); +#237446 = FACE_BOUND('',#237447,.F.); +#237447 = EDGE_LOOP('',(#237448,#237449,#237457,#237465)); +#237448 = ORIENTED_EDGE('',*,*,#237427,.T.); +#237449 = ORIENTED_EDGE('',*,*,#237450,.T.); +#237450 = EDGE_CURVE('',#237420,#237451,#237453,.T.); +#237451 = VERTEX_POINT('',#237452); +#237452 = CARTESIAN_POINT('',(130.683147,-119.475557,-3.5E-02)); +#237453 = LINE('',#237454,#237455); +#237454 = CARTESIAN_POINT('',(130.698079,-119.439509,-3.5E-02)); +#237455 = VECTOR('',#237456,1.); +#237456 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#237457 = ORIENTED_EDGE('',*,*,#237458,.F.); +#237458 = EDGE_CURVE('',#237459,#237451,#237461,.T.); +#237459 = VERTEX_POINT('',#237460); +#237460 = CARTESIAN_POINT('',(130.683147,-119.475557,0.)); +#237461 = LINE('',#237462,#237463); +#237462 = CARTESIAN_POINT('',(130.683147,-119.475557,0.)); +#237463 = VECTOR('',#237464,1.); +#237464 = DIRECTION('',(0.,0.,-1.)); +#237465 = ORIENTED_EDGE('',*,*,#237466,.F.); +#237466 = EDGE_CURVE('',#237428,#237459,#237467,.T.); +#237467 = LINE('',#237468,#237469); +#237468 = CARTESIAN_POINT('',(130.698079,-119.439509,0.)); +#237469 = VECTOR('',#237470,1.); +#237470 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#237471 = PLANE('',#237472); +#237472 = AXIS2_PLACEMENT_3D('',#237473,#237474,#237475); +#237473 = CARTESIAN_POINT('',(130.698079,-119.439509,0.)); +#237474 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#237475 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#237476 = ADVANCED_FACE('',(#237477),#237502,.F.); +#237477 = FACE_BOUND('',#237478,.F.); +#237478 = EDGE_LOOP('',(#237479,#237480,#237488,#237496)); +#237479 = ORIENTED_EDGE('',*,*,#237458,.T.); +#237480 = ORIENTED_EDGE('',*,*,#237481,.T.); +#237481 = EDGE_CURVE('',#237451,#237482,#237484,.T.); +#237482 = VERTEX_POINT('',#237483); +#237483 = CARTESIAN_POINT('',(130.075557,-120.083147,-3.5E-02)); +#237484 = LINE('',#237485,#237486); +#237485 = CARTESIAN_POINT('',(130.683147,-119.475557,-3.5E-02)); +#237486 = VECTOR('',#237487,1.); +#237487 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#237488 = ORIENTED_EDGE('',*,*,#237489,.F.); +#237489 = EDGE_CURVE('',#237490,#237482,#237492,.T.); +#237490 = VERTEX_POINT('',#237491); +#237491 = CARTESIAN_POINT('',(130.075557,-120.083147,0.)); +#237492 = LINE('',#237493,#237494); +#237493 = CARTESIAN_POINT('',(130.075557,-120.083147,0.)); +#237494 = VECTOR('',#237495,1.); +#237495 = DIRECTION('',(0.,0.,-1.)); +#237496 = ORIENTED_EDGE('',*,*,#237497,.F.); +#237497 = EDGE_CURVE('',#237459,#237490,#237498,.T.); +#237498 = LINE('',#237499,#237500); +#237499 = CARTESIAN_POINT('',(130.683147,-119.475557,0.)); +#237500 = VECTOR('',#237501,1.); +#237501 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#237502 = PLANE('',#237503); +#237503 = AXIS2_PLACEMENT_3D('',#237504,#237505,#237506); +#237504 = CARTESIAN_POINT('',(130.683147,-119.475557,0.)); +#237505 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#237506 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#237507 = ADVANCED_FACE('',(#237508),#237533,.F.); +#237508 = FACE_BOUND('',#237509,.F.); +#237509 = EDGE_LOOP('',(#237510,#237511,#237519,#237527)); +#237510 = ORIENTED_EDGE('',*,*,#237489,.T.); +#237511 = ORIENTED_EDGE('',*,*,#237512,.T.); +#237512 = EDGE_CURVE('',#237482,#237513,#237515,.T.); +#237513 = VERTEX_POINT('',#237514); +#237514 = CARTESIAN_POINT('',(130.039509,-120.098079,-3.5E-02)); +#237515 = LINE('',#237516,#237517); +#237516 = CARTESIAN_POINT('',(130.075557,-120.083147,-3.5E-02)); +#237517 = VECTOR('',#237518,1.); +#237518 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237519 = ORIENTED_EDGE('',*,*,#237520,.F.); +#237520 = EDGE_CURVE('',#237521,#237513,#237523,.T.); +#237521 = VERTEX_POINT('',#237522); +#237522 = CARTESIAN_POINT('',(130.039509,-120.098079,0.)); +#237523 = LINE('',#237524,#237525); +#237524 = CARTESIAN_POINT('',(130.039509,-120.098079,0.)); +#237525 = VECTOR('',#237526,1.); +#237526 = DIRECTION('',(0.,0.,-1.)); +#237527 = ORIENTED_EDGE('',*,*,#237528,.F.); +#237528 = EDGE_CURVE('',#237490,#237521,#237529,.T.); +#237529 = LINE('',#237530,#237531); +#237530 = CARTESIAN_POINT('',(130.075557,-120.083147,0.)); +#237531 = VECTOR('',#237532,1.); +#237532 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237533 = PLANE('',#237534); +#237534 = AXIS2_PLACEMENT_3D('',#237535,#237536,#237537); +#237535 = CARTESIAN_POINT('',(130.075557,-120.083147,0.)); +#237536 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#237537 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237538 = ADVANCED_FACE('',(#237539),#237564,.F.); +#237539 = FACE_BOUND('',#237540,.F.); +#237540 = EDGE_LOOP('',(#237541,#237542,#237550,#237558)); +#237541 = ORIENTED_EDGE('',*,*,#237520,.T.); +#237542 = ORIENTED_EDGE('',*,*,#237543,.T.); +#237543 = EDGE_CURVE('',#237513,#237544,#237546,.T.); +#237544 = VERTEX_POINT('',#237545); +#237545 = CARTESIAN_POINT('',(128.900491,-120.098079,-3.5E-02)); +#237546 = LINE('',#237547,#237548); +#237547 = CARTESIAN_POINT('',(130.039509,-120.098079,-3.5E-02)); +#237548 = VECTOR('',#237549,1.); +#237549 = DIRECTION('',(-1.,0.,0.)); +#237550 = ORIENTED_EDGE('',*,*,#237551,.F.); +#237551 = EDGE_CURVE('',#237552,#237544,#237554,.T.); +#237552 = VERTEX_POINT('',#237553); +#237553 = CARTESIAN_POINT('',(128.900491,-120.098079,0.)); +#237554 = LINE('',#237555,#237556); +#237555 = CARTESIAN_POINT('',(128.900491,-120.098079,0.)); +#237556 = VECTOR('',#237557,1.); +#237557 = DIRECTION('',(0.,0.,-1.)); +#237558 = ORIENTED_EDGE('',*,*,#237559,.F.); +#237559 = EDGE_CURVE('',#237521,#237552,#237560,.T.); +#237560 = LINE('',#237561,#237562); +#237561 = CARTESIAN_POINT('',(130.039509,-120.098079,0.)); +#237562 = VECTOR('',#237563,1.); +#237563 = DIRECTION('',(-1.,0.,0.)); +#237564 = PLANE('',#237565); +#237565 = AXIS2_PLACEMENT_3D('',#237566,#237567,#237568); +#237566 = CARTESIAN_POINT('',(130.039509,-120.098079,0.)); +#237567 = DIRECTION('',(0.,1.,0.)); +#237568 = DIRECTION('',(-1.,0.,0.)); +#237569 = ADVANCED_FACE('',(#237570),#237595,.F.); +#237570 = FACE_BOUND('',#237571,.F.); +#237571 = EDGE_LOOP('',(#237572,#237573,#237581,#237589)); +#237572 = ORIENTED_EDGE('',*,*,#237551,.T.); +#237573 = ORIENTED_EDGE('',*,*,#237574,.T.); +#237574 = EDGE_CURVE('',#237544,#237575,#237577,.T.); +#237575 = VERTEX_POINT('',#237576); +#237576 = CARTESIAN_POINT('',(128.864443,-120.083148,-3.5E-02)); +#237577 = LINE('',#237578,#237579); +#237578 = CARTESIAN_POINT('',(128.900491,-120.098079,-3.5E-02)); +#237579 = VECTOR('',#237580,1.); +#237580 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#237581 = ORIENTED_EDGE('',*,*,#237582,.F.); +#237582 = EDGE_CURVE('',#237583,#237575,#237585,.T.); +#237583 = VERTEX_POINT('',#237584); +#237584 = CARTESIAN_POINT('',(128.864443,-120.083148,0.)); +#237585 = LINE('',#237586,#237587); +#237586 = CARTESIAN_POINT('',(128.864443,-120.083148,0.)); +#237587 = VECTOR('',#237588,1.); +#237588 = DIRECTION('',(0.,0.,-1.)); +#237589 = ORIENTED_EDGE('',*,*,#237590,.F.); +#237590 = EDGE_CURVE('',#237552,#237583,#237591,.T.); +#237591 = LINE('',#237592,#237593); +#237592 = CARTESIAN_POINT('',(128.900491,-120.098079,0.)); +#237593 = VECTOR('',#237594,1.); +#237594 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#237595 = PLANE('',#237596); +#237596 = AXIS2_PLACEMENT_3D('',#237597,#237598,#237599); +#237597 = CARTESIAN_POINT('',(128.900491,-120.098079,0.)); +#237598 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#237599 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#237600 = ADVANCED_FACE('',(#237601),#237626,.F.); +#237601 = FACE_BOUND('',#237602,.F.); +#237602 = EDGE_LOOP('',(#237603,#237604,#237612,#237620)); +#237603 = ORIENTED_EDGE('',*,*,#237582,.T.); +#237604 = ORIENTED_EDGE('',*,*,#237605,.T.); +#237605 = EDGE_CURVE('',#237575,#237606,#237608,.T.); +#237606 = VERTEX_POINT('',#237607); +#237607 = CARTESIAN_POINT('',(128.103578,-119.325,-3.5E-02)); +#237608 = LINE('',#237609,#237610); +#237609 = CARTESIAN_POINT('',(128.864443,-120.083148,-3.5E-02)); +#237610 = VECTOR('',#237611,1.); +#237611 = DIRECTION('',(-0.708370422682,0.705840877443,0.)); +#237612 = ORIENTED_EDGE('',*,*,#237613,.F.); +#237613 = EDGE_CURVE('',#237614,#237606,#237616,.T.); +#237614 = VERTEX_POINT('',#237615); +#237615 = CARTESIAN_POINT('',(128.103578,-119.325,0.)); +#237616 = LINE('',#237617,#237618); +#237617 = CARTESIAN_POINT('',(128.103578,-119.325,0.)); +#237618 = VECTOR('',#237619,1.); +#237619 = DIRECTION('',(0.,0.,-1.)); +#237620 = ORIENTED_EDGE('',*,*,#237621,.F.); +#237621 = EDGE_CURVE('',#237583,#237614,#237622,.T.); +#237622 = LINE('',#237623,#237624); +#237623 = CARTESIAN_POINT('',(128.864443,-120.083148,0.)); +#237624 = VECTOR('',#237625,1.); +#237625 = DIRECTION('',(-0.708370422682,0.705840877443,0.)); +#237626 = PLANE('',#237627); +#237627 = AXIS2_PLACEMENT_3D('',#237628,#237629,#237630); +#237628 = CARTESIAN_POINT('',(128.864443,-120.083148,0.)); +#237629 = DIRECTION('',(0.705840877443,0.708370422682,0.)); +#237630 = DIRECTION('',(-0.708370422682,0.705840877443,0.)); +#237631 = ADVANCED_FACE('',(#237632),#237657,.F.); +#237632 = FACE_BOUND('',#237633,.F.); +#237633 = EDGE_LOOP('',(#237634,#237635,#237643,#237651)); +#237634 = ORIENTED_EDGE('',*,*,#237613,.T.); +#237635 = ORIENTED_EDGE('',*,*,#237636,.T.); +#237636 = EDGE_CURVE('',#237606,#237637,#237639,.T.); +#237637 = VERTEX_POINT('',#237638); +#237638 = CARTESIAN_POINT('',(127.616421,-119.325,-3.5E-02)); +#237639 = LINE('',#237640,#237641); +#237640 = CARTESIAN_POINT('',(128.103578,-119.325,-3.5E-02)); +#237641 = VECTOR('',#237642,1.); +#237642 = DIRECTION('',(-1.,0.,0.)); +#237643 = ORIENTED_EDGE('',*,*,#237644,.F.); +#237644 = EDGE_CURVE('',#237645,#237637,#237647,.T.); +#237645 = VERTEX_POINT('',#237646); +#237646 = CARTESIAN_POINT('',(127.616421,-119.325,0.)); +#237647 = LINE('',#237648,#237649); +#237648 = CARTESIAN_POINT('',(127.616421,-119.325,0.)); +#237649 = VECTOR('',#237650,1.); +#237650 = DIRECTION('',(0.,0.,-1.)); +#237651 = ORIENTED_EDGE('',*,*,#237652,.F.); +#237652 = EDGE_CURVE('',#237614,#237645,#237653,.T.); +#237653 = LINE('',#237654,#237655); +#237654 = CARTESIAN_POINT('',(128.103578,-119.325,0.)); +#237655 = VECTOR('',#237656,1.); +#237656 = DIRECTION('',(-1.,0.,0.)); +#237657 = PLANE('',#237658); +#237658 = AXIS2_PLACEMENT_3D('',#237659,#237660,#237661); +#237659 = CARTESIAN_POINT('',(128.103578,-119.325,0.)); +#237660 = DIRECTION('',(0.,1.,0.)); +#237661 = DIRECTION('',(-1.,0.,0.)); +#237662 = ADVANCED_FACE('',(#237663),#237688,.F.); +#237663 = FACE_BOUND('',#237664,.F.); +#237664 = EDGE_LOOP('',(#237665,#237666,#237674,#237682)); +#237665 = ORIENTED_EDGE('',*,*,#237644,.T.); +#237666 = ORIENTED_EDGE('',*,*,#237667,.T.); +#237667 = EDGE_CURVE('',#237637,#237668,#237670,.T.); +#237668 = VERTEX_POINT('',#237669); +#237669 = CARTESIAN_POINT('',(127.131292,-119.807412,-3.5E-02)); +#237670 = LINE('',#237671,#237672); +#237671 = CARTESIAN_POINT('',(127.616421,-119.325,-3.5E-02)); +#237672 = VECTOR('',#237673,1.); +#237673 = DIRECTION('',(-0.709089647074,-0.705118339296,0.)); +#237674 = ORIENTED_EDGE('',*,*,#237675,.F.); +#237675 = EDGE_CURVE('',#237676,#237668,#237678,.T.); +#237676 = VERTEX_POINT('',#237677); +#237677 = CARTESIAN_POINT('',(127.131292,-119.807412,0.)); +#237678 = LINE('',#237679,#237680); +#237679 = CARTESIAN_POINT('',(127.131292,-119.807412,0.)); +#237680 = VECTOR('',#237681,1.); +#237681 = DIRECTION('',(0.,0.,-1.)); +#237682 = ORIENTED_EDGE('',*,*,#237683,.F.); +#237683 = EDGE_CURVE('',#237645,#237676,#237684,.T.); +#237684 = LINE('',#237685,#237686); +#237685 = CARTESIAN_POINT('',(127.616421,-119.325,0.)); +#237686 = VECTOR('',#237687,1.); +#237687 = DIRECTION('',(-0.709089647074,-0.705118339296,0.)); +#237688 = PLANE('',#237689); +#237689 = AXIS2_PLACEMENT_3D('',#237690,#237691,#237692); +#237690 = CARTESIAN_POINT('',(127.616421,-119.325,0.)); +#237691 = DIRECTION('',(-0.705118339296,0.709089647074,0.)); +#237692 = DIRECTION('',(-0.709089647074,-0.705118339296,0.)); +#237693 = ADVANCED_FACE('',(#237694),#237719,.F.); +#237694 = FACE_BOUND('',#237695,.F.); +#237695 = EDGE_LOOP('',(#237696,#237697,#237705,#237713)); +#237696 = ORIENTED_EDGE('',*,*,#237675,.T.); +#237697 = ORIENTED_EDGE('',*,*,#237698,.T.); +#237698 = EDGE_CURVE('',#237668,#237699,#237701,.T.); +#237699 = VERTEX_POINT('',#237700); +#237700 = CARTESIAN_POINT('',(127.095244,-119.822344,-3.5E-02)); +#237701 = LINE('',#237702,#237703); +#237702 = CARTESIAN_POINT('',(127.131292,-119.807412,-3.5E-02)); +#237703 = VECTOR('',#237704,1.); +#237704 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237705 = ORIENTED_EDGE('',*,*,#237706,.F.); +#237706 = EDGE_CURVE('',#237707,#237699,#237709,.T.); +#237707 = VERTEX_POINT('',#237708); +#237708 = CARTESIAN_POINT('',(127.095244,-119.822344,0.)); +#237709 = LINE('',#237710,#237711); +#237710 = CARTESIAN_POINT('',(127.095244,-119.822344,0.)); +#237711 = VECTOR('',#237712,1.); +#237712 = DIRECTION('',(0.,0.,-1.)); +#237713 = ORIENTED_EDGE('',*,*,#237714,.F.); +#237714 = EDGE_CURVE('',#237676,#237707,#237715,.T.); +#237715 = LINE('',#237716,#237717); +#237716 = CARTESIAN_POINT('',(127.131292,-119.807412,0.)); +#237717 = VECTOR('',#237718,1.); +#237718 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237719 = PLANE('',#237720); +#237720 = AXIS2_PLACEMENT_3D('',#237721,#237722,#237723); +#237721 = CARTESIAN_POINT('',(127.131292,-119.807412,0.)); +#237722 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#237723 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#237724 = ADVANCED_FACE('',(#237725),#237750,.F.); +#237725 = FACE_BOUND('',#237726,.F.); +#237726 = EDGE_LOOP('',(#237727,#237728,#237736,#237744)); +#237727 = ORIENTED_EDGE('',*,*,#237706,.T.); +#237728 = ORIENTED_EDGE('',*,*,#237729,.T.); +#237729 = EDGE_CURVE('',#237699,#237730,#237732,.T.); +#237730 = VERTEX_POINT('',#237731); +#237731 = CARTESIAN_POINT('',(126.905396,-119.824265,-3.5E-02)); +#237732 = LINE('',#237733,#237734); +#237733 = CARTESIAN_POINT('',(127.095244,-119.822344,-3.5E-02)); +#237734 = VECTOR('',#237735,1.); +#237735 = DIRECTION('',(-0.999948810683,-1.011810324743E-02,0.)); +#237736 = ORIENTED_EDGE('',*,*,#237737,.F.); +#237737 = EDGE_CURVE('',#237738,#237730,#237740,.T.); +#237738 = VERTEX_POINT('',#237739); +#237739 = CARTESIAN_POINT('',(126.905396,-119.824265,0.)); +#237740 = LINE('',#237741,#237742); +#237741 = CARTESIAN_POINT('',(126.905396,-119.824265,0.)); +#237742 = VECTOR('',#237743,1.); +#237743 = DIRECTION('',(0.,0.,-1.)); +#237744 = ORIENTED_EDGE('',*,*,#237745,.F.); +#237745 = EDGE_CURVE('',#237707,#237738,#237746,.T.); +#237746 = LINE('',#237747,#237748); +#237747 = CARTESIAN_POINT('',(127.095244,-119.822344,0.)); +#237748 = VECTOR('',#237749,1.); +#237749 = DIRECTION('',(-0.999948810683,-1.011810324743E-02,0.)); +#237750 = PLANE('',#237751); +#237751 = AXIS2_PLACEMENT_3D('',#237752,#237753,#237754); +#237752 = CARTESIAN_POINT('',(127.095244,-119.822344,0.)); +#237753 = DIRECTION('',(-1.011810324743E-02,0.999948810683,0.)); +#237754 = DIRECTION('',(-0.999948810683,-1.011810324743E-02,0.)); +#237755 = ADVANCED_FACE('',(#237756),#237781,.F.); +#237756 = FACE_BOUND('',#237757,.F.); +#237757 = EDGE_LOOP('',(#237758,#237759,#237767,#237775)); +#237758 = ORIENTED_EDGE('',*,*,#237737,.T.); +#237759 = ORIENTED_EDGE('',*,*,#237760,.T.); +#237760 = EDGE_CURVE('',#237730,#237761,#237763,.T.); +#237761 = VERTEX_POINT('',#237762); +#237762 = CARTESIAN_POINT('',(126.901429,-119.83907,-3.5E-02)); +#237763 = LINE('',#237764,#237765); +#237764 = CARTESIAN_POINT('',(126.905396,-119.824265,-3.5E-02)); +#237765 = VECTOR('',#237766,1.); +#237766 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#237767 = ORIENTED_EDGE('',*,*,#237768,.F.); +#237768 = EDGE_CURVE('',#237769,#237761,#237771,.T.); +#237769 = VERTEX_POINT('',#237770); +#237770 = CARTESIAN_POINT('',(126.901429,-119.83907,0.)); +#237771 = LINE('',#237772,#237773); +#237772 = CARTESIAN_POINT('',(126.901429,-119.83907,0.)); +#237773 = VECTOR('',#237774,1.); +#237774 = DIRECTION('',(0.,0.,-1.)); +#237775 = ORIENTED_EDGE('',*,*,#237776,.F.); +#237776 = EDGE_CURVE('',#237738,#237769,#237777,.T.); +#237777 = LINE('',#237778,#237779); +#237778 = CARTESIAN_POINT('',(126.905396,-119.824265,0.)); +#237779 = VECTOR('',#237780,1.); +#237780 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#237781 = PLANE('',#237782); +#237782 = AXIS2_PLACEMENT_3D('',#237783,#237784,#237785); +#237783 = CARTESIAN_POINT('',(126.905396,-119.824265,0.)); +#237784 = DIRECTION('',(-0.965925627198,0.258819788119,0.)); +#237785 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#237786 = ADVANCED_FACE('',(#237787),#237814,.T.); +#237787 = FACE_BOUND('',#237788,.F.); +#237788 = EDGE_LOOP('',(#237789,#237790,#237799,#237807)); +#237789 = ORIENTED_EDGE('',*,*,#237768,.T.); +#237790 = ORIENTED_EDGE('',*,*,#237791,.T.); +#237791 = EDGE_CURVE('',#237761,#237792,#237794,.T.); +#237792 = VERTEX_POINT('',#237793); +#237793 = CARTESIAN_POINT('',(126.901429,-119.60946,-3.5E-02)); +#237794 = CIRCLE('',#237795,0.299999850918); +#237795 = AXIS2_PLACEMENT_3D('',#237796,#237797,#237798); +#237796 = CARTESIAN_POINT('',(126.6242652893,-119.724265,-3.5E-02)); +#237797 = DIRECTION('',(0.,0.,-1.)); +#237798 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#237799 = ORIENTED_EDGE('',*,*,#237800,.F.); +#237800 = EDGE_CURVE('',#237801,#237792,#237803,.T.); +#237801 = VERTEX_POINT('',#237802); +#237802 = CARTESIAN_POINT('',(126.901429,-119.60946,0.)); +#237803 = LINE('',#237804,#237805); +#237804 = CARTESIAN_POINT('',(126.901429,-119.60946,0.)); +#237805 = VECTOR('',#237806,1.); +#237806 = DIRECTION('',(0.,0.,-1.)); +#237807 = ORIENTED_EDGE('',*,*,#237808,.F.); +#237808 = EDGE_CURVE('',#237769,#237801,#237809,.T.); +#237809 = CIRCLE('',#237810,0.299999850918); +#237810 = AXIS2_PLACEMENT_3D('',#237811,#237812,#237813); +#237811 = CARTESIAN_POINT('',(126.6242652893,-119.724265,0.)); +#237812 = DIRECTION('',(0.,0.,-1.)); +#237813 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#237814 = CYLINDRICAL_SURFACE('',#237815,0.299999850918); +#237815 = AXIS2_PLACEMENT_3D('',#237816,#237817,#237818); +#237816 = CARTESIAN_POINT('',(126.6242652893,-119.724265,0.)); +#237817 = DIRECTION('',(-0.,-0.,1.)); +#237818 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#237819 = ADVANCED_FACE('',(#237820),#237845,.F.); +#237820 = FACE_BOUND('',#237821,.F.); +#237821 = EDGE_LOOP('',(#237822,#237823,#237831,#237839)); +#237822 = ORIENTED_EDGE('',*,*,#237800,.T.); +#237823 = ORIENTED_EDGE('',*,*,#237824,.T.); +#237824 = EDGE_CURVE('',#237792,#237825,#237827,.T.); +#237825 = VERTEX_POINT('',#237826); +#237826 = CARTESIAN_POINT('',(126.905396,-119.624265,-3.5E-02)); +#237827 = LINE('',#237828,#237829); +#237828 = CARTESIAN_POINT('',(126.901429,-119.60946,-3.5E-02)); +#237829 = VECTOR('',#237830,1.); +#237830 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#237831 = ORIENTED_EDGE('',*,*,#237832,.F.); +#237832 = EDGE_CURVE('',#237833,#237825,#237835,.T.); +#237833 = VERTEX_POINT('',#237834); +#237834 = CARTESIAN_POINT('',(126.905396,-119.624265,0.)); +#237835 = LINE('',#237836,#237837); +#237836 = CARTESIAN_POINT('',(126.905396,-119.624265,0.)); +#237837 = VECTOR('',#237838,1.); +#237838 = DIRECTION('',(0.,0.,-1.)); +#237839 = ORIENTED_EDGE('',*,*,#237840,.F.); +#237840 = EDGE_CURVE('',#237801,#237833,#237841,.T.); +#237841 = LINE('',#237842,#237843); +#237842 = CARTESIAN_POINT('',(126.901429,-119.60946,0.)); +#237843 = VECTOR('',#237844,1.); +#237844 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#237845 = PLANE('',#237846); +#237846 = AXIS2_PLACEMENT_3D('',#237847,#237848,#237849); +#237847 = CARTESIAN_POINT('',(126.901429,-119.60946,0.)); +#237848 = DIRECTION('',(-0.965925627198,-0.258819788119,-0.)); +#237849 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#237850 = ADVANCED_FACE('',(#237851),#237876,.F.); +#237851 = FACE_BOUND('',#237852,.F.); +#237852 = EDGE_LOOP('',(#237853,#237854,#237862,#237870)); +#237853 = ORIENTED_EDGE('',*,*,#237832,.T.); +#237854 = ORIENTED_EDGE('',*,*,#237855,.T.); +#237855 = EDGE_CURVE('',#237825,#237856,#237858,.T.); +#237856 = VERTEX_POINT('',#237857); +#237857 = CARTESIAN_POINT('',(127.034313,-119.624265,-3.5E-02)); +#237858 = LINE('',#237859,#237860); +#237859 = CARTESIAN_POINT('',(126.905396,-119.624265,-3.5E-02)); +#237860 = VECTOR('',#237861,1.); +#237861 = DIRECTION('',(1.,0.,0.)); +#237862 = ORIENTED_EDGE('',*,*,#237863,.F.); +#237863 = EDGE_CURVE('',#237864,#237856,#237866,.T.); +#237864 = VERTEX_POINT('',#237865); +#237865 = CARTESIAN_POINT('',(127.034313,-119.624265,0.)); +#237866 = LINE('',#237867,#237868); +#237867 = CARTESIAN_POINT('',(127.034313,-119.624265,0.)); +#237868 = VECTOR('',#237869,1.); +#237869 = DIRECTION('',(0.,0.,-1.)); +#237870 = ORIENTED_EDGE('',*,*,#237871,.F.); +#237871 = EDGE_CURVE('',#237833,#237864,#237872,.T.); +#237872 = LINE('',#237873,#237874); +#237873 = CARTESIAN_POINT('',(126.905396,-119.624265,0.)); +#237874 = VECTOR('',#237875,1.); +#237875 = DIRECTION('',(1.,0.,0.)); +#237876 = PLANE('',#237877); +#237877 = AXIS2_PLACEMENT_3D('',#237878,#237879,#237880); +#237878 = CARTESIAN_POINT('',(126.905396,-119.624265,0.)); +#237879 = DIRECTION('',(0.,-1.,0.)); +#237880 = DIRECTION('',(1.,0.,0.)); +#237881 = ADVANCED_FACE('',(#237882),#237907,.F.); +#237882 = FACE_BOUND('',#237883,.F.); +#237883 = EDGE_LOOP('',(#237884,#237885,#237893,#237901)); +#237884 = ORIENTED_EDGE('',*,*,#237863,.T.); +#237885 = ORIENTED_EDGE('',*,*,#237886,.T.); +#237886 = EDGE_CURVE('',#237856,#237887,#237889,.T.); +#237887 = VERTEX_POINT('',#237888); +#237888 = CARTESIAN_POINT('',(127.519442,-119.141853,-3.5E-02)); +#237889 = LINE('',#237890,#237891); +#237890 = CARTESIAN_POINT('',(127.034313,-119.624265,-3.5E-02)); +#237891 = VECTOR('',#237892,1.); +#237892 = DIRECTION('',(0.709089647074,0.705118339296,0.)); +#237893 = ORIENTED_EDGE('',*,*,#237894,.F.); +#237894 = EDGE_CURVE('',#237895,#237887,#237897,.T.); +#237895 = VERTEX_POINT('',#237896); +#237896 = CARTESIAN_POINT('',(127.519442,-119.141853,0.)); +#237897 = LINE('',#237898,#237899); +#237898 = CARTESIAN_POINT('',(127.519442,-119.141853,0.)); +#237899 = VECTOR('',#237900,1.); +#237900 = DIRECTION('',(0.,0.,-1.)); +#237901 = ORIENTED_EDGE('',*,*,#237902,.F.); +#237902 = EDGE_CURVE('',#237864,#237895,#237903,.T.); +#237903 = LINE('',#237904,#237905); +#237904 = CARTESIAN_POINT('',(127.034313,-119.624265,0.)); +#237905 = VECTOR('',#237906,1.); +#237906 = DIRECTION('',(0.709089647074,0.705118339296,0.)); +#237907 = PLANE('',#237908); +#237908 = AXIS2_PLACEMENT_3D('',#237909,#237910,#237911); +#237909 = CARTESIAN_POINT('',(127.034313,-119.624265,0.)); +#237910 = DIRECTION('',(0.705118339296,-0.709089647074,0.)); +#237911 = DIRECTION('',(0.709089647074,0.705118339296,0.)); +#237912 = ADVANCED_FACE('',(#237913),#237938,.F.); +#237913 = FACE_BOUND('',#237914,.F.); +#237914 = EDGE_LOOP('',(#237915,#237916,#237924,#237932)); +#237915 = ORIENTED_EDGE('',*,*,#237894,.T.); +#237916 = ORIENTED_EDGE('',*,*,#237917,.T.); +#237917 = EDGE_CURVE('',#237887,#237918,#237920,.T.); +#237918 = VERTEX_POINT('',#237919); +#237919 = CARTESIAN_POINT('',(127.555491,-119.126921,-3.5E-02)); +#237920 = LINE('',#237921,#237922); +#237921 = CARTESIAN_POINT('',(127.519442,-119.141853,-3.5E-02)); +#237922 = VECTOR('',#237923,1.); +#237923 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#237924 = ORIENTED_EDGE('',*,*,#237925,.F.); +#237925 = EDGE_CURVE('',#237926,#237918,#237928,.T.); +#237926 = VERTEX_POINT('',#237927); +#237927 = CARTESIAN_POINT('',(127.555491,-119.126921,0.)); +#237928 = LINE('',#237929,#237930); +#237929 = CARTESIAN_POINT('',(127.555491,-119.126921,0.)); +#237930 = VECTOR('',#237931,1.); +#237931 = DIRECTION('',(0.,0.,-1.)); +#237932 = ORIENTED_EDGE('',*,*,#237933,.F.); +#237933 = EDGE_CURVE('',#237895,#237926,#237934,.T.); +#237934 = LINE('',#237935,#237936); +#237935 = CARTESIAN_POINT('',(127.519442,-119.141853,0.)); +#237936 = VECTOR('',#237937,1.); +#237937 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#237938 = PLANE('',#237939); +#237939 = AXIS2_PLACEMENT_3D('',#237940,#237941,#237942); +#237940 = CARTESIAN_POINT('',(127.519442,-119.141853,0.)); +#237941 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#237942 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#237943 = ADVANCED_FACE('',(#237944),#237969,.F.); +#237944 = FACE_BOUND('',#237945,.F.); +#237945 = EDGE_LOOP('',(#237946,#237947,#237955,#237963)); +#237946 = ORIENTED_EDGE('',*,*,#237925,.T.); +#237947 = ORIENTED_EDGE('',*,*,#237948,.T.); +#237948 = EDGE_CURVE('',#237918,#237949,#237951,.T.); +#237949 = VERTEX_POINT('',#237950); +#237950 = CARTESIAN_POINT('',(128.164509,-119.126921,-3.5E-02)); +#237951 = LINE('',#237952,#237953); +#237952 = CARTESIAN_POINT('',(127.555491,-119.126921,-3.5E-02)); +#237953 = VECTOR('',#237954,1.); +#237954 = DIRECTION('',(1.,0.,0.)); +#237955 = ORIENTED_EDGE('',*,*,#237956,.F.); +#237956 = EDGE_CURVE('',#237957,#237949,#237959,.T.); +#237957 = VERTEX_POINT('',#237958); +#237958 = CARTESIAN_POINT('',(128.164509,-119.126921,0.)); +#237959 = LINE('',#237960,#237961); +#237960 = CARTESIAN_POINT('',(128.164509,-119.126921,0.)); +#237961 = VECTOR('',#237962,1.); +#237962 = DIRECTION('',(0.,0.,-1.)); +#237963 = ORIENTED_EDGE('',*,*,#237964,.F.); +#237964 = EDGE_CURVE('',#237926,#237957,#237965,.T.); +#237965 = LINE('',#237966,#237967); +#237966 = CARTESIAN_POINT('',(127.555491,-119.126921,0.)); +#237967 = VECTOR('',#237968,1.); +#237968 = DIRECTION('',(1.,0.,0.)); +#237969 = PLANE('',#237970); +#237970 = AXIS2_PLACEMENT_3D('',#237971,#237972,#237973); +#237971 = CARTESIAN_POINT('',(127.555491,-119.126921,0.)); +#237972 = DIRECTION('',(0.,-1.,0.)); +#237973 = DIRECTION('',(1.,0.,0.)); +#237974 = ADVANCED_FACE('',(#237975),#238000,.F.); +#237975 = FACE_BOUND('',#237976,.F.); +#237976 = EDGE_LOOP('',(#237977,#237978,#237986,#237994)); +#237977 = ORIENTED_EDGE('',*,*,#237956,.T.); +#237978 = ORIENTED_EDGE('',*,*,#237979,.T.); +#237979 = EDGE_CURVE('',#237949,#237980,#237982,.T.); +#237980 = VERTEX_POINT('',#237981); +#237981 = CARTESIAN_POINT('',(128.200557,-119.141853,-3.5E-02)); +#237982 = LINE('',#237983,#237984); +#237983 = CARTESIAN_POINT('',(128.164509,-119.126921,-3.5E-02)); +#237984 = VECTOR('',#237985,1.); +#237985 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#237986 = ORIENTED_EDGE('',*,*,#237987,.F.); +#237987 = EDGE_CURVE('',#237988,#237980,#237990,.T.); +#237988 = VERTEX_POINT('',#237989); +#237989 = CARTESIAN_POINT('',(128.200557,-119.141853,0.)); +#237990 = LINE('',#237991,#237992); +#237991 = CARTESIAN_POINT('',(128.200557,-119.141853,0.)); +#237992 = VECTOR('',#237993,1.); +#237993 = DIRECTION('',(0.,0.,-1.)); +#237994 = ORIENTED_EDGE('',*,*,#237995,.F.); +#237995 = EDGE_CURVE('',#237957,#237988,#237996,.T.); +#237996 = LINE('',#237997,#237998); +#237997 = CARTESIAN_POINT('',(128.164509,-119.126921,0.)); +#237998 = VECTOR('',#237999,1.); +#237999 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#238000 = PLANE('',#238001); +#238001 = AXIS2_PLACEMENT_3D('',#238002,#238003,#238004); +#238002 = CARTESIAN_POINT('',(128.164509,-119.126921,0.)); +#238003 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#238004 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#238005 = ADVANCED_FACE('',(#238006),#238031,.F.); +#238006 = FACE_BOUND('',#238007,.F.); +#238007 = EDGE_LOOP('',(#238008,#238009,#238017,#238025)); +#238008 = ORIENTED_EDGE('',*,*,#237987,.T.); +#238009 = ORIENTED_EDGE('',*,*,#238010,.T.); +#238010 = EDGE_CURVE('',#237980,#238011,#238013,.T.); +#238011 = VERTEX_POINT('',#238012); +#238012 = CARTESIAN_POINT('',(128.961421,-119.9,-3.5E-02)); +#238013 = LINE('',#238014,#238015); +#238014 = CARTESIAN_POINT('',(128.200557,-119.141853,-3.5E-02)); +#238015 = VECTOR('',#238016,1.); +#238016 = DIRECTION('',(0.708370424344,-0.705840875775,0.)); +#238017 = ORIENTED_EDGE('',*,*,#238018,.F.); +#238018 = EDGE_CURVE('',#238019,#238011,#238021,.T.); +#238019 = VERTEX_POINT('',#238020); +#238020 = CARTESIAN_POINT('',(128.961421,-119.9,0.)); +#238021 = LINE('',#238022,#238023); +#238022 = CARTESIAN_POINT('',(128.961421,-119.9,0.)); +#238023 = VECTOR('',#238024,1.); +#238024 = DIRECTION('',(0.,0.,-1.)); +#238025 = ORIENTED_EDGE('',*,*,#238026,.F.); +#238026 = EDGE_CURVE('',#237988,#238019,#238027,.T.); +#238027 = LINE('',#238028,#238029); +#238028 = CARTESIAN_POINT('',(128.200557,-119.141853,0.)); +#238029 = VECTOR('',#238030,1.); +#238030 = DIRECTION('',(0.708370424344,-0.705840875775,0.)); +#238031 = PLANE('',#238032); +#238032 = AXIS2_PLACEMENT_3D('',#238033,#238034,#238035); +#238033 = CARTESIAN_POINT('',(128.200557,-119.141853,0.)); +#238034 = DIRECTION('',(-0.705840875775,-0.708370424344,-0.)); +#238035 = DIRECTION('',(0.708370424344,-0.705840875775,0.)); +#238036 = ADVANCED_FACE('',(#238037),#238062,.F.); +#238037 = FACE_BOUND('',#238038,.F.); +#238038 = EDGE_LOOP('',(#238039,#238040,#238048,#238056)); +#238039 = ORIENTED_EDGE('',*,*,#238018,.T.); +#238040 = ORIENTED_EDGE('',*,*,#238041,.T.); +#238041 = EDGE_CURVE('',#238011,#238042,#238044,.T.); +#238042 = VERTEX_POINT('',#238043); +#238043 = CARTESIAN_POINT('',(129.978578,-119.9,-3.5E-02)); +#238044 = LINE('',#238045,#238046); +#238045 = CARTESIAN_POINT('',(128.961421,-119.9,-3.5E-02)); +#238046 = VECTOR('',#238047,1.); +#238047 = DIRECTION('',(1.,0.,0.)); +#238048 = ORIENTED_EDGE('',*,*,#238049,.F.); +#238049 = EDGE_CURVE('',#238050,#238042,#238052,.T.); +#238050 = VERTEX_POINT('',#238051); +#238051 = CARTESIAN_POINT('',(129.978578,-119.9,0.)); +#238052 = LINE('',#238053,#238054); +#238053 = CARTESIAN_POINT('',(129.978578,-119.9,0.)); +#238054 = VECTOR('',#238055,1.); +#238055 = DIRECTION('',(0.,0.,-1.)); +#238056 = ORIENTED_EDGE('',*,*,#238057,.F.); +#238057 = EDGE_CURVE('',#238019,#238050,#238058,.T.); +#238058 = LINE('',#238059,#238060); +#238059 = CARTESIAN_POINT('',(128.961421,-119.9,0.)); +#238060 = VECTOR('',#238061,1.); +#238061 = DIRECTION('',(1.,0.,0.)); +#238062 = PLANE('',#238063); +#238063 = AXIS2_PLACEMENT_3D('',#238064,#238065,#238066); +#238064 = CARTESIAN_POINT('',(128.961421,-119.9,0.)); +#238065 = DIRECTION('',(0.,-1.,0.)); +#238066 = DIRECTION('',(1.,0.,0.)); +#238067 = ADVANCED_FACE('',(#238068),#238093,.F.); +#238068 = FACE_BOUND('',#238069,.F.); +#238069 = EDGE_LOOP('',(#238070,#238071,#238079,#238087)); +#238070 = ORIENTED_EDGE('',*,*,#238049,.T.); +#238071 = ORIENTED_EDGE('',*,*,#238072,.T.); +#238072 = EDGE_CURVE('',#238042,#238073,#238075,.T.); +#238073 = VERTEX_POINT('',#238074); +#238074 = CARTESIAN_POINT('',(130.5,-119.378578,-3.5E-02)); +#238075 = LINE('',#238076,#238077); +#238076 = CARTESIAN_POINT('',(129.978578,-119.9,-3.5E-02)); +#238077 = VECTOR('',#238078,1.); +#238078 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#238079 = ORIENTED_EDGE('',*,*,#238080,.F.); +#238080 = EDGE_CURVE('',#238081,#238073,#238083,.T.); +#238081 = VERTEX_POINT('',#238082); +#238082 = CARTESIAN_POINT('',(130.5,-119.378578,0.)); +#238083 = LINE('',#238084,#238085); +#238084 = CARTESIAN_POINT('',(130.5,-119.378578,0.)); +#238085 = VECTOR('',#238086,1.); +#238086 = DIRECTION('',(0.,0.,-1.)); +#238087 = ORIENTED_EDGE('',*,*,#238088,.F.); +#238088 = EDGE_CURVE('',#238050,#238081,#238089,.T.); +#238089 = LINE('',#238090,#238091); +#238090 = CARTESIAN_POINT('',(129.978578,-119.9,0.)); +#238091 = VECTOR('',#238092,1.); +#238092 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#238093 = PLANE('',#238094); +#238094 = AXIS2_PLACEMENT_3D('',#238095,#238096,#238097); +#238095 = CARTESIAN_POINT('',(129.978578,-119.9,0.)); +#238096 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#238097 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#238098 = ADVANCED_FACE('',(#238099),#238124,.F.); +#238099 = FACE_BOUND('',#238100,.F.); +#238100 = EDGE_LOOP('',(#238101,#238102,#238110,#238118)); +#238101 = ORIENTED_EDGE('',*,*,#238080,.T.); +#238102 = ORIENTED_EDGE('',*,*,#238103,.T.); +#238103 = EDGE_CURVE('',#238073,#238104,#238106,.T.); +#238104 = VERTEX_POINT('',#238105); +#238105 = CARTESIAN_POINT('',(130.501921,-119.253876,-3.5E-02)); +#238106 = LINE('',#238107,#238108); +#238107 = CARTESIAN_POINT('',(130.5,-119.378578,-3.5E-02)); +#238108 = VECTOR('',#238109,1.); +#238109 = DIRECTION('',(1.540289737607E-02,0.999881368339,0.)); +#238110 = ORIENTED_EDGE('',*,*,#238111,.F.); +#238111 = EDGE_CURVE('',#238112,#238104,#238114,.T.); +#238112 = VERTEX_POINT('',#238113); +#238113 = CARTESIAN_POINT('',(130.501921,-119.253876,0.)); +#238114 = LINE('',#238115,#238116); +#238115 = CARTESIAN_POINT('',(130.501921,-119.253876,0.)); +#238116 = VECTOR('',#238117,1.); +#238117 = DIRECTION('',(0.,0.,-1.)); +#238118 = ORIENTED_EDGE('',*,*,#238119,.F.); +#238119 = EDGE_CURVE('',#238081,#238112,#238120,.T.); +#238120 = LINE('',#238121,#238122); +#238121 = CARTESIAN_POINT('',(130.5,-119.378578,0.)); +#238122 = VECTOR('',#238123,1.); +#238123 = DIRECTION('',(1.540289737607E-02,0.999881368339,0.)); +#238124 = PLANE('',#238125); +#238125 = AXIS2_PLACEMENT_3D('',#238126,#238127,#238128); +#238126 = CARTESIAN_POINT('',(130.5,-119.378578,0.)); +#238127 = DIRECTION('',(0.999881368339,-1.540289737607E-02,0.)); +#238128 = DIRECTION('',(1.540289737607E-02,0.999881368339,0.)); +#238129 = ADVANCED_FACE('',(#238130),#238155,.F.); +#238130 = FACE_BOUND('',#238131,.F.); +#238131 = EDGE_LOOP('',(#238132,#238133,#238141,#238149)); +#238132 = ORIENTED_EDGE('',*,*,#238111,.T.); +#238133 = ORIENTED_EDGE('',*,*,#238134,.T.); +#238134 = EDGE_CURVE('',#238104,#238135,#238137,.T.); +#238135 = VERTEX_POINT('',#238136); +#238136 = CARTESIAN_POINT('',(130.516853,-119.217828,-3.5E-02)); +#238137 = LINE('',#238138,#238139); +#238138 = CARTESIAN_POINT('',(130.501921,-119.253876,-3.5E-02)); +#238139 = VECTOR('',#238140,1.); +#238140 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#238141 = ORIENTED_EDGE('',*,*,#238142,.F.); +#238142 = EDGE_CURVE('',#238143,#238135,#238145,.T.); +#238143 = VERTEX_POINT('',#238144); +#238144 = CARTESIAN_POINT('',(130.516853,-119.217828,0.)); +#238145 = LINE('',#238146,#238147); +#238146 = CARTESIAN_POINT('',(130.516853,-119.217828,0.)); +#238147 = VECTOR('',#238148,1.); +#238148 = DIRECTION('',(0.,0.,-1.)); +#238149 = ORIENTED_EDGE('',*,*,#238150,.F.); +#238150 = EDGE_CURVE('',#238112,#238143,#238151,.T.); +#238151 = LINE('',#238152,#238153); +#238152 = CARTESIAN_POINT('',(130.501921,-119.253876,0.)); +#238153 = VECTOR('',#238154,1.); +#238154 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#238155 = PLANE('',#238156); +#238156 = AXIS2_PLACEMENT_3D('',#238157,#238158,#238159); +#238157 = CARTESIAN_POINT('',(130.501921,-119.253876,0.)); +#238158 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#238159 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#238160 = ADVANCED_FACE('',(#238161),#238177,.F.); +#238161 = FACE_BOUND('',#238162,.F.); +#238162 = EDGE_LOOP('',(#238163,#238164,#238170,#238171)); +#238163 = ORIENTED_EDGE('',*,*,#238142,.T.); +#238164 = ORIENTED_EDGE('',*,*,#238165,.T.); +#238165 = EDGE_CURVE('',#238135,#237255,#238166,.T.); +#238166 = LINE('',#238167,#238168); +#238167 = CARTESIAN_POINT('',(130.516853,-119.217828,-3.5E-02)); +#238168 = VECTOR('',#238169,1.); +#238169 = DIRECTION('',(0.70710728556,0.707106276813,0.)); +#238170 = ORIENTED_EDGE('',*,*,#237252,.F.); +#238171 = ORIENTED_EDGE('',*,*,#238172,.F.); +#238172 = EDGE_CURVE('',#238143,#237253,#238173,.T.); +#238173 = LINE('',#238174,#238175); +#238174 = CARTESIAN_POINT('',(130.516853,-119.217828,0.)); +#238175 = VECTOR('',#238176,1.); +#238176 = DIRECTION('',(0.70710728556,0.707106276813,0.)); +#238177 = PLANE('',#238178); +#238178 = AXIS2_PLACEMENT_3D('',#238179,#238180,#238181); +#238179 = CARTESIAN_POINT('',(130.516853,-119.217828,0.)); +#238180 = DIRECTION('',(0.707106276813,-0.70710728556,0.)); +#238181 = DIRECTION('',(0.70710728556,0.707106276813,0.)); +#238182 = ADVANCED_FACE('',(#238183),#238210,.F.); +#238183 = FACE_BOUND('',#238184,.F.); +#238184 = EDGE_LOOP('',(#238185,#238195,#238202,#238203)); +#238185 = ORIENTED_EDGE('',*,*,#238186,.T.); +#238186 = EDGE_CURVE('',#238187,#238189,#238191,.T.); +#238187 = VERTEX_POINT('',#238188); +#238188 = CARTESIAN_POINT('',(126.76152,-119.724265,0.)); +#238189 = VERTEX_POINT('',#238190); +#238190 = CARTESIAN_POINT('',(126.76152,-119.724265,-3.5E-02)); +#238191 = LINE('',#238192,#238193); +#238192 = CARTESIAN_POINT('',(126.76152,-119.724265,0.)); +#238193 = VECTOR('',#238194,1.); +#238194 = DIRECTION('',(0.,0.,-1.)); +#238195 = ORIENTED_EDGE('',*,*,#238196,.T.); +#238196 = EDGE_CURVE('',#238189,#238189,#238197,.T.); +#238197 = CIRCLE('',#238198,0.137255); +#238198 = AXIS2_PLACEMENT_3D('',#238199,#238200,#238201); +#238199 = CARTESIAN_POINT('',(126.624265,-119.724265,-3.5E-02)); +#238200 = DIRECTION('',(0.,0.,1.)); +#238201 = DIRECTION('',(1.,0.,-0.)); +#238202 = ORIENTED_EDGE('',*,*,#238186,.F.); +#238203 = ORIENTED_EDGE('',*,*,#238204,.F.); +#238204 = EDGE_CURVE('',#238187,#238187,#238205,.T.); +#238205 = CIRCLE('',#238206,0.137255); +#238206 = AXIS2_PLACEMENT_3D('',#238207,#238208,#238209); +#238207 = CARTESIAN_POINT('',(126.624265,-119.724265,0.)); +#238208 = DIRECTION('',(0.,0.,1.)); +#238209 = DIRECTION('',(1.,0.,-0.)); +#238210 = CYLINDRICAL_SURFACE('',#238211,0.137255); +#238211 = AXIS2_PLACEMENT_3D('',#238212,#238213,#238214); +#238212 = CARTESIAN_POINT('',(126.624265,-119.724265,0.)); +#238213 = DIRECTION('',(0.,0.,1.)); +#238214 = DIRECTION('',(1.,0.,-0.)); +#238215 = ADVANCED_FACE('',(#238216,#238248),#238251,.F.); +#238216 = FACE_BOUND('',#238217,.F.); +#238217 = EDGE_LOOP('',(#238218,#238219,#238220,#238221,#238222,#238223, + #238224,#238225,#238226,#238227,#238228,#238229,#238230,#238231, + #238232,#238233,#238234,#238235,#238236,#238237,#238238,#238239, + #238240,#238241,#238242,#238243,#238244,#238245,#238246,#238247)); +#238218 = ORIENTED_EDGE('',*,*,#237278,.T.); +#238219 = ORIENTED_EDGE('',*,*,#237309,.T.); +#238220 = ORIENTED_EDGE('',*,*,#237341,.T.); +#238221 = ORIENTED_EDGE('',*,*,#237373,.T.); +#238222 = ORIENTED_EDGE('',*,*,#237404,.T.); +#238223 = ORIENTED_EDGE('',*,*,#237435,.T.); +#238224 = ORIENTED_EDGE('',*,*,#237466,.T.); +#238225 = ORIENTED_EDGE('',*,*,#237497,.T.); +#238226 = ORIENTED_EDGE('',*,*,#237528,.T.); +#238227 = ORIENTED_EDGE('',*,*,#237559,.T.); +#238228 = ORIENTED_EDGE('',*,*,#237590,.T.); +#238229 = ORIENTED_EDGE('',*,*,#237621,.T.); +#238230 = ORIENTED_EDGE('',*,*,#237652,.T.); +#238231 = ORIENTED_EDGE('',*,*,#237683,.T.); +#238232 = ORIENTED_EDGE('',*,*,#237714,.T.); +#238233 = ORIENTED_EDGE('',*,*,#237745,.T.); +#238234 = ORIENTED_EDGE('',*,*,#237776,.T.); +#238235 = ORIENTED_EDGE('',*,*,#237808,.T.); +#238236 = ORIENTED_EDGE('',*,*,#237840,.T.); +#238237 = ORIENTED_EDGE('',*,*,#237871,.T.); +#238238 = ORIENTED_EDGE('',*,*,#237902,.T.); +#238239 = ORIENTED_EDGE('',*,*,#237933,.T.); +#238240 = ORIENTED_EDGE('',*,*,#237964,.T.); +#238241 = ORIENTED_EDGE('',*,*,#237995,.T.); +#238242 = ORIENTED_EDGE('',*,*,#238026,.T.); +#238243 = ORIENTED_EDGE('',*,*,#238057,.T.); +#238244 = ORIENTED_EDGE('',*,*,#238088,.T.); +#238245 = ORIENTED_EDGE('',*,*,#238119,.T.); +#238246 = ORIENTED_EDGE('',*,*,#238150,.T.); +#238247 = ORIENTED_EDGE('',*,*,#238172,.T.); +#238248 = FACE_BOUND('',#238249,.F.); +#238249 = EDGE_LOOP('',(#238250)); +#238250 = ORIENTED_EDGE('',*,*,#238204,.T.); +#238251 = PLANE('',#238252); +#238252 = AXIS2_PLACEMENT_3D('',#238253,#238254,#238255); +#238253 = CARTESIAN_POINT('',(0.,0.,0.)); +#238254 = DIRECTION('',(-0.,-0.,-1.)); +#238255 = DIRECTION('',(-1.,0.,0.)); +#238256 = ADVANCED_FACE('',(#238257,#238289),#238292,.T.); +#238257 = FACE_BOUND('',#238258,.T.); +#238258 = EDGE_LOOP('',(#238259,#238260,#238261,#238262,#238263,#238264, + #238265,#238266,#238267,#238268,#238269,#238270,#238271,#238272, + #238273,#238274,#238275,#238276,#238277,#238278,#238279,#238280, + #238281,#238282,#238283,#238284,#238285,#238286,#238287,#238288)); +#238259 = ORIENTED_EDGE('',*,*,#237262,.T.); +#238260 = ORIENTED_EDGE('',*,*,#237293,.T.); +#238261 = ORIENTED_EDGE('',*,*,#237324,.T.); +#238262 = ORIENTED_EDGE('',*,*,#237357,.T.); +#238263 = ORIENTED_EDGE('',*,*,#237388,.T.); +#238264 = ORIENTED_EDGE('',*,*,#237419,.T.); +#238265 = ORIENTED_EDGE('',*,*,#237450,.T.); +#238266 = ORIENTED_EDGE('',*,*,#237481,.T.); +#238267 = ORIENTED_EDGE('',*,*,#237512,.T.); +#238268 = ORIENTED_EDGE('',*,*,#237543,.T.); +#238269 = ORIENTED_EDGE('',*,*,#237574,.T.); +#238270 = ORIENTED_EDGE('',*,*,#237605,.T.); +#238271 = ORIENTED_EDGE('',*,*,#237636,.T.); +#238272 = ORIENTED_EDGE('',*,*,#237667,.T.); +#238273 = ORIENTED_EDGE('',*,*,#237698,.T.); +#238274 = ORIENTED_EDGE('',*,*,#237729,.T.); +#238275 = ORIENTED_EDGE('',*,*,#237760,.T.); +#238276 = ORIENTED_EDGE('',*,*,#237791,.T.); +#238277 = ORIENTED_EDGE('',*,*,#237824,.T.); +#238278 = ORIENTED_EDGE('',*,*,#237855,.T.); +#238279 = ORIENTED_EDGE('',*,*,#237886,.T.); +#238280 = ORIENTED_EDGE('',*,*,#237917,.T.); +#238281 = ORIENTED_EDGE('',*,*,#237948,.T.); +#238282 = ORIENTED_EDGE('',*,*,#237979,.T.); +#238283 = ORIENTED_EDGE('',*,*,#238010,.T.); +#238284 = ORIENTED_EDGE('',*,*,#238041,.T.); +#238285 = ORIENTED_EDGE('',*,*,#238072,.T.); +#238286 = ORIENTED_EDGE('',*,*,#238103,.T.); +#238287 = ORIENTED_EDGE('',*,*,#238134,.T.); +#238288 = ORIENTED_EDGE('',*,*,#238165,.T.); +#238289 = FACE_BOUND('',#238290,.T.); +#238290 = EDGE_LOOP('',(#238291)); +#238291 = ORIENTED_EDGE('',*,*,#238196,.T.); +#238292 = PLANE('',#238293); +#238293 = AXIS2_PLACEMENT_3D('',#238294,#238295,#238296); +#238294 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#238295 = DIRECTION('',(-0.,-0.,-1.)); +#238296 = DIRECTION('',(-1.,0.,0.)); +#238297 = MANIFOLD_SOLID_BREP('',#238298); +#238298 = CLOSED_SHELL('',(#238299,#238339,#238370,#238401,#238432, + #238463,#238494,#238525,#238556,#238587,#238618,#238649,#238680, + #238711,#238742,#238773,#238806,#238837,#238870,#238901,#238932, + #238963,#238994,#239025,#239056,#239087,#239118,#239149,#239180, + #239211,#239242,#239273,#239304,#239335,#239368,#239390,#239423, + #239456,#239505)); +#238299 = ADVANCED_FACE('',(#238300),#238334,.F.); +#238300 = FACE_BOUND('',#238301,.F.); +#238301 = EDGE_LOOP('',(#238302,#238312,#238320,#238328)); +#238302 = ORIENTED_EDGE('',*,*,#238303,.T.); +#238303 = EDGE_CURVE('',#238304,#238306,#238308,.T.); +#238304 = VERTEX_POINT('',#238305); +#238305 = CARTESIAN_POINT('',(133.45,-70.28113,0.)); +#238306 = VERTEX_POINT('',#238307); +#238307 = CARTESIAN_POINT('',(133.45,-70.28113,-3.5E-02)); +#238308 = LINE('',#238309,#238310); +#238309 = CARTESIAN_POINT('',(133.45,-70.28113,0.)); +#238310 = VECTOR('',#238311,1.); +#238311 = DIRECTION('',(0.,0.,-1.)); +#238312 = ORIENTED_EDGE('',*,*,#238313,.T.); +#238313 = EDGE_CURVE('',#238306,#238314,#238316,.T.); +#238314 = VERTEX_POINT('',#238315); +#238315 = CARTESIAN_POINT('',(133.448079,-71.769509,-3.5E-02)); +#238316 = LINE('',#238317,#238318); +#238317 = CARTESIAN_POINT('',(133.45,-70.28113,-3.5E-02)); +#238318 = VECTOR('',#238319,1.); +#238319 = DIRECTION('',(-1.290664810485E-03,-0.999999167092,0.)); +#238320 = ORIENTED_EDGE('',*,*,#238321,.F.); +#238321 = EDGE_CURVE('',#238322,#238314,#238324,.T.); +#238322 = VERTEX_POINT('',#238323); +#238323 = CARTESIAN_POINT('',(133.448079,-71.769509,0.)); +#238324 = LINE('',#238325,#238326); +#238325 = CARTESIAN_POINT('',(133.448079,-71.769509,0.)); +#238326 = VECTOR('',#238327,1.); +#238327 = DIRECTION('',(0.,0.,-1.)); +#238328 = ORIENTED_EDGE('',*,*,#238329,.F.); +#238329 = EDGE_CURVE('',#238304,#238322,#238330,.T.); +#238330 = LINE('',#238331,#238332); +#238331 = CARTESIAN_POINT('',(133.45,-70.28113,0.)); +#238332 = VECTOR('',#238333,1.); +#238333 = DIRECTION('',(-1.290664810485E-03,-0.999999167092,0.)); +#238334 = PLANE('',#238335); +#238335 = AXIS2_PLACEMENT_3D('',#238336,#238337,#238338); +#238336 = CARTESIAN_POINT('',(133.45,-70.28113,0.)); +#238337 = DIRECTION('',(-0.999999167092,1.290664810485E-03,0.)); +#238338 = DIRECTION('',(-1.290664810485E-03,-0.999999167092,0.)); +#238339 = ADVANCED_FACE('',(#238340),#238365,.F.); +#238340 = FACE_BOUND('',#238341,.F.); +#238341 = EDGE_LOOP('',(#238342,#238343,#238351,#238359)); +#238342 = ORIENTED_EDGE('',*,*,#238321,.T.); +#238343 = ORIENTED_EDGE('',*,*,#238344,.T.); +#238344 = EDGE_CURVE('',#238314,#238345,#238347,.T.); +#238345 = VERTEX_POINT('',#238346); +#238346 = CARTESIAN_POINT('',(133.433147,-71.805557,-3.5E-02)); +#238347 = LINE('',#238348,#238349); +#238348 = CARTESIAN_POINT('',(133.448079,-71.769509,-3.5E-02)); +#238349 = VECTOR('',#238350,1.); +#238350 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238351 = ORIENTED_EDGE('',*,*,#238352,.F.); +#238352 = EDGE_CURVE('',#238353,#238345,#238355,.T.); +#238353 = VERTEX_POINT('',#238354); +#238354 = CARTESIAN_POINT('',(133.433147,-71.805557,0.)); +#238355 = LINE('',#238356,#238357); +#238356 = CARTESIAN_POINT('',(133.433147,-71.805557,0.)); +#238357 = VECTOR('',#238358,1.); +#238358 = DIRECTION('',(0.,0.,-1.)); +#238359 = ORIENTED_EDGE('',*,*,#238360,.F.); +#238360 = EDGE_CURVE('',#238322,#238353,#238361,.T.); +#238361 = LINE('',#238362,#238363); +#238362 = CARTESIAN_POINT('',(133.448079,-71.769509,0.)); +#238363 = VECTOR('',#238364,1.); +#238364 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238365 = PLANE('',#238366); +#238366 = AXIS2_PLACEMENT_3D('',#238367,#238368,#238369); +#238367 = CARTESIAN_POINT('',(133.448079,-71.769509,0.)); +#238368 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#238369 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238370 = ADVANCED_FACE('',(#238371),#238396,.F.); +#238371 = FACE_BOUND('',#238372,.F.); +#238372 = EDGE_LOOP('',(#238373,#238374,#238382,#238390)); +#238373 = ORIENTED_EDGE('',*,*,#238352,.T.); +#238374 = ORIENTED_EDGE('',*,*,#238375,.T.); +#238375 = EDGE_CURVE('',#238345,#238376,#238378,.T.); +#238376 = VERTEX_POINT('',#238377); +#238377 = CARTESIAN_POINT('',(132.85,-72.391422,-3.5E-02)); +#238378 = LINE('',#238379,#238380); +#238379 = CARTESIAN_POINT('',(133.433147,-71.805557,-3.5E-02)); +#238380 = VECTOR('',#238381,1.); +#238381 = DIRECTION('',(-0.705460822639,-0.708748917263,0.)); +#238382 = ORIENTED_EDGE('',*,*,#238383,.F.); +#238383 = EDGE_CURVE('',#238384,#238376,#238386,.T.); +#238384 = VERTEX_POINT('',#238385); +#238385 = CARTESIAN_POINT('',(132.85,-72.391422,0.)); +#238386 = LINE('',#238387,#238388); +#238387 = CARTESIAN_POINT('',(132.85,-72.391422,0.)); +#238388 = VECTOR('',#238389,1.); +#238389 = DIRECTION('',(0.,0.,-1.)); +#238390 = ORIENTED_EDGE('',*,*,#238391,.F.); +#238391 = EDGE_CURVE('',#238353,#238384,#238392,.T.); +#238392 = LINE('',#238393,#238394); +#238393 = CARTESIAN_POINT('',(133.433147,-71.805557,0.)); +#238394 = VECTOR('',#238395,1.); +#238395 = DIRECTION('',(-0.705460822639,-0.708748917263,0.)); +#238396 = PLANE('',#238397); +#238397 = AXIS2_PLACEMENT_3D('',#238398,#238399,#238400); +#238398 = CARTESIAN_POINT('',(133.433147,-71.805557,0.)); +#238399 = DIRECTION('',(-0.708748917263,0.705460822639,0.)); +#238400 = DIRECTION('',(-0.705460822639,-0.708748917263,0.)); +#238401 = ADVANCED_FACE('',(#238402),#238427,.F.); +#238402 = FACE_BOUND('',#238403,.F.); +#238403 = EDGE_LOOP('',(#238404,#238405,#238413,#238421)); +#238404 = ORIENTED_EDGE('',*,*,#238383,.T.); +#238405 = ORIENTED_EDGE('',*,*,#238406,.T.); +#238406 = EDGE_CURVE('',#238376,#238407,#238409,.T.); +#238407 = VERTEX_POINT('',#238408); +#238408 = CARTESIAN_POINT('',(132.85,-92.960049,-3.5E-02)); +#238409 = LINE('',#238410,#238411); +#238410 = CARTESIAN_POINT('',(132.85,-72.391422,-3.5E-02)); +#238411 = VECTOR('',#238412,1.); +#238412 = DIRECTION('',(0.,-1.,0.)); +#238413 = ORIENTED_EDGE('',*,*,#238414,.F.); +#238414 = EDGE_CURVE('',#238415,#238407,#238417,.T.); +#238415 = VERTEX_POINT('',#238416); +#238416 = CARTESIAN_POINT('',(132.85,-92.960049,0.)); +#238417 = LINE('',#238418,#238419); +#238418 = CARTESIAN_POINT('',(132.85,-92.960049,0.)); +#238419 = VECTOR('',#238420,1.); +#238420 = DIRECTION('',(0.,0.,-1.)); +#238421 = ORIENTED_EDGE('',*,*,#238422,.F.); +#238422 = EDGE_CURVE('',#238384,#238415,#238423,.T.); +#238423 = LINE('',#238424,#238425); +#238424 = CARTESIAN_POINT('',(132.85,-72.391422,0.)); +#238425 = VECTOR('',#238426,1.); +#238426 = DIRECTION('',(0.,-1.,0.)); +#238427 = PLANE('',#238428); +#238428 = AXIS2_PLACEMENT_3D('',#238429,#238430,#238431); +#238429 = CARTESIAN_POINT('',(132.85,-72.391422,0.)); +#238430 = DIRECTION('',(-1.,-0.,-0.)); +#238431 = DIRECTION('',(0.,-1.,0.)); +#238432 = ADVANCED_FACE('',(#238433),#238458,.F.); +#238433 = FACE_BOUND('',#238434,.F.); +#238434 = EDGE_LOOP('',(#238435,#238436,#238444,#238452)); +#238435 = ORIENTED_EDGE('',*,*,#238414,.T.); +#238436 = ORIENTED_EDGE('',*,*,#238437,.T.); +#238437 = EDGE_CURVE('',#238407,#238438,#238440,.T.); +#238438 = VERTEX_POINT('',#238439); +#238439 = CARTESIAN_POINT('',(133.983148,-94.095914,-3.5E-02)); +#238440 = LINE('',#238441,#238442); +#238441 = CARTESIAN_POINT('',(132.85,-92.960049,-3.5E-02)); +#238442 = VECTOR('',#238443,1.); +#238443 = DIRECTION('',(0.706259559064,-0.707952989421,0.)); +#238444 = ORIENTED_EDGE('',*,*,#238445,.F.); +#238445 = EDGE_CURVE('',#238446,#238438,#238448,.T.); +#238446 = VERTEX_POINT('',#238447); +#238447 = CARTESIAN_POINT('',(133.983148,-94.095914,0.)); +#238448 = LINE('',#238449,#238450); +#238449 = CARTESIAN_POINT('',(133.983148,-94.095914,0.)); +#238450 = VECTOR('',#238451,1.); +#238451 = DIRECTION('',(0.,0.,-1.)); +#238452 = ORIENTED_EDGE('',*,*,#238453,.F.); +#238453 = EDGE_CURVE('',#238415,#238446,#238454,.T.); +#238454 = LINE('',#238455,#238456); +#238455 = CARTESIAN_POINT('',(132.85,-92.960049,0.)); +#238456 = VECTOR('',#238457,1.); +#238457 = DIRECTION('',(0.706259559064,-0.707952989421,0.)); +#238458 = PLANE('',#238459); +#238459 = AXIS2_PLACEMENT_3D('',#238460,#238461,#238462); +#238460 = CARTESIAN_POINT('',(132.85,-92.960049,0.)); +#238461 = DIRECTION('',(-0.707952989421,-0.706259559064,-0.)); +#238462 = DIRECTION('',(0.706259559064,-0.707952989421,0.)); +#238463 = ADVANCED_FACE('',(#238464),#238489,.F.); +#238464 = FACE_BOUND('',#238465,.F.); +#238465 = EDGE_LOOP('',(#238466,#238467,#238475,#238483)); +#238466 = ORIENTED_EDGE('',*,*,#238445,.T.); +#238467 = ORIENTED_EDGE('',*,*,#238468,.T.); +#238468 = EDGE_CURVE('',#238438,#238469,#238471,.T.); +#238469 = VERTEX_POINT('',#238470); +#238470 = CARTESIAN_POINT('',(133.998079,-94.131962,-3.5E-02)); +#238471 = LINE('',#238472,#238473); +#238472 = CARTESIAN_POINT('',(133.983148,-94.095914,-3.5E-02)); +#238473 = VECTOR('',#238474,1.); +#238474 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#238475 = ORIENTED_EDGE('',*,*,#238476,.F.); +#238476 = EDGE_CURVE('',#238477,#238469,#238479,.T.); +#238477 = VERTEX_POINT('',#238478); +#238478 = CARTESIAN_POINT('',(133.998079,-94.131962,0.)); +#238479 = LINE('',#238480,#238481); +#238480 = CARTESIAN_POINT('',(133.998079,-94.131962,0.)); +#238481 = VECTOR('',#238482,1.); +#238482 = DIRECTION('',(0.,0.,-1.)); +#238483 = ORIENTED_EDGE('',*,*,#238484,.F.); +#238484 = EDGE_CURVE('',#238446,#238477,#238485,.T.); +#238485 = LINE('',#238486,#238487); +#238486 = CARTESIAN_POINT('',(133.983148,-94.095914,0.)); +#238487 = VECTOR('',#238488,1.); +#238488 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#238489 = PLANE('',#238490); +#238490 = AXIS2_PLACEMENT_3D('',#238491,#238492,#238493); +#238491 = CARTESIAN_POINT('',(133.983148,-94.095914,0.)); +#238492 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#238493 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#238494 = ADVANCED_FACE('',(#238495),#238520,.F.); +#238495 = FACE_BOUND('',#238496,.F.); +#238496 = EDGE_LOOP('',(#238497,#238498,#238506,#238514)); +#238497 = ORIENTED_EDGE('',*,*,#238476,.T.); +#238498 = ORIENTED_EDGE('',*,*,#238499,.T.); +#238499 = EDGE_CURVE('',#238469,#238500,#238502,.T.); +#238500 = VERTEX_POINT('',#238501); +#238501 = CARTESIAN_POINT('',(133.998079,-94.819509,-3.5E-02)); +#238502 = LINE('',#238503,#238504); +#238503 = CARTESIAN_POINT('',(133.998079,-94.131962,-3.5E-02)); +#238504 = VECTOR('',#238505,1.); +#238505 = DIRECTION('',(0.,-1.,0.)); +#238506 = ORIENTED_EDGE('',*,*,#238507,.F.); +#238507 = EDGE_CURVE('',#238508,#238500,#238510,.T.); +#238508 = VERTEX_POINT('',#238509); +#238509 = CARTESIAN_POINT('',(133.998079,-94.819509,0.)); +#238510 = LINE('',#238511,#238512); +#238511 = CARTESIAN_POINT('',(133.998079,-94.819509,0.)); +#238512 = VECTOR('',#238513,1.); +#238513 = DIRECTION('',(0.,0.,-1.)); +#238514 = ORIENTED_EDGE('',*,*,#238515,.F.); +#238515 = EDGE_CURVE('',#238477,#238508,#238516,.T.); +#238516 = LINE('',#238517,#238518); +#238517 = CARTESIAN_POINT('',(133.998079,-94.131962,0.)); +#238518 = VECTOR('',#238519,1.); +#238519 = DIRECTION('',(0.,-1.,0.)); +#238520 = PLANE('',#238521); +#238521 = AXIS2_PLACEMENT_3D('',#238522,#238523,#238524); +#238522 = CARTESIAN_POINT('',(133.998079,-94.131962,0.)); +#238523 = DIRECTION('',(-1.,-0.,-0.)); +#238524 = DIRECTION('',(0.,-1.,0.)); +#238525 = ADVANCED_FACE('',(#238526),#238551,.F.); +#238526 = FACE_BOUND('',#238527,.F.); +#238527 = EDGE_LOOP('',(#238528,#238529,#238537,#238545)); +#238528 = ORIENTED_EDGE('',*,*,#238507,.T.); +#238529 = ORIENTED_EDGE('',*,*,#238530,.T.); +#238530 = EDGE_CURVE('',#238500,#238531,#238533,.T.); +#238531 = VERTEX_POINT('',#238532); +#238532 = CARTESIAN_POINT('',(133.983147,-94.855557,-3.5E-02)); +#238533 = LINE('',#238534,#238535); +#238534 = CARTESIAN_POINT('',(133.998079,-94.819509,-3.5E-02)); +#238535 = VECTOR('',#238536,1.); +#238536 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238537 = ORIENTED_EDGE('',*,*,#238538,.F.); +#238538 = EDGE_CURVE('',#238539,#238531,#238541,.T.); +#238539 = VERTEX_POINT('',#238540); +#238540 = CARTESIAN_POINT('',(133.983147,-94.855557,0.)); +#238541 = LINE('',#238542,#238543); +#238542 = CARTESIAN_POINT('',(133.983147,-94.855557,0.)); +#238543 = VECTOR('',#238544,1.); +#238544 = DIRECTION('',(0.,0.,-1.)); +#238545 = ORIENTED_EDGE('',*,*,#238546,.F.); +#238546 = EDGE_CURVE('',#238508,#238539,#238547,.T.); +#238547 = LINE('',#238548,#238549); +#238548 = CARTESIAN_POINT('',(133.998079,-94.819509,0.)); +#238549 = VECTOR('',#238550,1.); +#238550 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238551 = PLANE('',#238552); +#238552 = AXIS2_PLACEMENT_3D('',#238553,#238554,#238555); +#238553 = CARTESIAN_POINT('',(133.998079,-94.819509,0.)); +#238554 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#238555 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#238556 = ADVANCED_FACE('',(#238557),#238582,.F.); +#238557 = FACE_BOUND('',#238558,.F.); +#238558 = EDGE_LOOP('',(#238559,#238560,#238568,#238576)); +#238559 = ORIENTED_EDGE('',*,*,#238538,.T.); +#238560 = ORIENTED_EDGE('',*,*,#238561,.T.); +#238561 = EDGE_CURVE('',#238531,#238562,#238564,.T.); +#238562 = VERTEX_POINT('',#238563); +#238563 = CARTESIAN_POINT('',(129.15,-99.691422,-3.5E-02)); +#238564 = LINE('',#238565,#238566); +#238565 = CARTESIAN_POINT('',(133.983147,-94.855557,-3.5E-02)); +#238566 = VECTOR('',#238567,1.); +#238567 = DIRECTION('',(-0.706907982562,-0.707305523936,0.)); +#238568 = ORIENTED_EDGE('',*,*,#238569,.F.); +#238569 = EDGE_CURVE('',#238570,#238562,#238572,.T.); +#238570 = VERTEX_POINT('',#238571); +#238571 = CARTESIAN_POINT('',(129.15,-99.691422,0.)); +#238572 = LINE('',#238573,#238574); +#238573 = CARTESIAN_POINT('',(129.15,-99.691422,0.)); +#238574 = VECTOR('',#238575,1.); +#238575 = DIRECTION('',(0.,0.,-1.)); +#238576 = ORIENTED_EDGE('',*,*,#238577,.F.); +#238577 = EDGE_CURVE('',#238539,#238570,#238578,.T.); +#238578 = LINE('',#238579,#238580); +#238579 = CARTESIAN_POINT('',(133.983147,-94.855557,0.)); +#238580 = VECTOR('',#238581,1.); +#238581 = DIRECTION('',(-0.706907982562,-0.707305523936,0.)); +#238582 = PLANE('',#238583); +#238583 = AXIS2_PLACEMENT_3D('',#238584,#238585,#238586); +#238584 = CARTESIAN_POINT('',(133.983147,-94.855557,0.)); +#238585 = DIRECTION('',(-0.707305523936,0.706907982562,0.)); +#238586 = DIRECTION('',(-0.706907982562,-0.707305523936,0.)); +#238587 = ADVANCED_FACE('',(#238588),#238613,.F.); +#238588 = FACE_BOUND('',#238589,.F.); +#238589 = EDGE_LOOP('',(#238590,#238591,#238599,#238607)); +#238590 = ORIENTED_EDGE('',*,*,#238569,.T.); +#238591 = ORIENTED_EDGE('',*,*,#238592,.T.); +#238592 = EDGE_CURVE('',#238562,#238593,#238595,.T.); +#238593 = VERTEX_POINT('',#238594); +#238594 = CARTESIAN_POINT('',(129.15,-102.160049,-3.5E-02)); +#238595 = LINE('',#238596,#238597); +#238596 = CARTESIAN_POINT('',(129.15,-99.691422,-3.5E-02)); +#238597 = VECTOR('',#238598,1.); +#238598 = DIRECTION('',(0.,-1.,0.)); +#238599 = ORIENTED_EDGE('',*,*,#238600,.F.); +#238600 = EDGE_CURVE('',#238601,#238593,#238603,.T.); +#238601 = VERTEX_POINT('',#238602); +#238602 = CARTESIAN_POINT('',(129.15,-102.160049,0.)); +#238603 = LINE('',#238604,#238605); +#238604 = CARTESIAN_POINT('',(129.15,-102.160049,0.)); +#238605 = VECTOR('',#238606,1.); +#238606 = DIRECTION('',(0.,0.,-1.)); +#238607 = ORIENTED_EDGE('',*,*,#238608,.F.); +#238608 = EDGE_CURVE('',#238570,#238601,#238609,.T.); +#238609 = LINE('',#238610,#238611); +#238610 = CARTESIAN_POINT('',(129.15,-99.691422,0.)); +#238611 = VECTOR('',#238612,1.); +#238612 = DIRECTION('',(0.,-1.,0.)); +#238613 = PLANE('',#238614); +#238614 = AXIS2_PLACEMENT_3D('',#238615,#238616,#238617); +#238615 = CARTESIAN_POINT('',(129.15,-99.691422,0.)); +#238616 = DIRECTION('',(-1.,-0.,-0.)); +#238617 = DIRECTION('',(0.,-1.,0.)); +#238618 = ADVANCED_FACE('',(#238619),#238644,.F.); +#238619 = FACE_BOUND('',#238620,.F.); +#238620 = EDGE_LOOP('',(#238621,#238622,#238630,#238638)); +#238621 = ORIENTED_EDGE('',*,*,#238600,.T.); +#238622 = ORIENTED_EDGE('',*,*,#238623,.T.); +#238623 = EDGE_CURVE('',#238593,#238624,#238626,.T.); +#238624 = VERTEX_POINT('',#238625); +#238625 = CARTESIAN_POINT('',(129.257412,-102.270179,-3.5E-02)); +#238626 = LINE('',#238627,#238628); +#238627 = CARTESIAN_POINT('',(129.15,-102.160049,-3.5E-02)); +#238628 = VECTOR('',#238629,1.); +#238629 = DIRECTION('',(0.698217595748,-0.715885597696,0.)); +#238630 = ORIENTED_EDGE('',*,*,#238631,.F.); +#238631 = EDGE_CURVE('',#238632,#238624,#238634,.T.); +#238632 = VERTEX_POINT('',#238633); +#238633 = CARTESIAN_POINT('',(129.257412,-102.270179,0.)); +#238634 = LINE('',#238635,#238636); +#238635 = CARTESIAN_POINT('',(129.257412,-102.270179,0.)); +#238636 = VECTOR('',#238637,1.); +#238637 = DIRECTION('',(0.,0.,-1.)); +#238638 = ORIENTED_EDGE('',*,*,#238639,.F.); +#238639 = EDGE_CURVE('',#238601,#238632,#238640,.T.); +#238640 = LINE('',#238641,#238642); +#238641 = CARTESIAN_POINT('',(129.15,-102.160049,0.)); +#238642 = VECTOR('',#238643,1.); +#238643 = DIRECTION('',(0.698217595748,-0.715885597696,0.)); +#238644 = PLANE('',#238645); +#238645 = AXIS2_PLACEMENT_3D('',#238646,#238647,#238648); +#238646 = CARTESIAN_POINT('',(129.15,-102.160049,0.)); +#238647 = DIRECTION('',(-0.715885597696,-0.698217595748,-0.)); +#238648 = DIRECTION('',(0.698217595748,-0.715885597696,0.)); +#238649 = ADVANCED_FACE('',(#238650),#238675,.F.); +#238650 = FACE_BOUND('',#238651,.F.); +#238651 = EDGE_LOOP('',(#238652,#238653,#238661,#238669)); +#238652 = ORIENTED_EDGE('',*,*,#238631,.T.); +#238653 = ORIENTED_EDGE('',*,*,#238654,.T.); +#238654 = EDGE_CURVE('',#238624,#238655,#238657,.T.); +#238655 = VERTEX_POINT('',#238656); +#238656 = CARTESIAN_POINT('',(129.272344,-102.306227,-3.5E-02)); +#238657 = LINE('',#238658,#238659); +#238658 = CARTESIAN_POINT('',(129.257412,-102.270179,-3.5E-02)); +#238659 = VECTOR('',#238660,1.); +#238660 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#238661 = ORIENTED_EDGE('',*,*,#238662,.F.); +#238662 = EDGE_CURVE('',#238663,#238655,#238665,.T.); +#238663 = VERTEX_POINT('',#238664); +#238664 = CARTESIAN_POINT('',(129.272344,-102.306227,0.)); +#238665 = LINE('',#238666,#238667); +#238666 = CARTESIAN_POINT('',(129.272344,-102.306227,0.)); +#238667 = VECTOR('',#238668,1.); +#238668 = DIRECTION('',(0.,0.,-1.)); +#238669 = ORIENTED_EDGE('',*,*,#238670,.F.); +#238670 = EDGE_CURVE('',#238632,#238663,#238671,.T.); +#238671 = LINE('',#238672,#238673); +#238672 = CARTESIAN_POINT('',(129.257412,-102.270179,0.)); +#238673 = VECTOR('',#238674,1.); +#238674 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#238675 = PLANE('',#238676); +#238676 = AXIS2_PLACEMENT_3D('',#238677,#238678,#238679); +#238677 = CARTESIAN_POINT('',(129.257412,-102.270179,0.)); +#238678 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#238679 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#238680 = ADVANCED_FACE('',(#238681),#238706,.F.); +#238681 = FACE_BOUND('',#238682,.F.); +#238682 = EDGE_LOOP('',(#238683,#238684,#238692,#238700)); +#238683 = ORIENTED_EDGE('',*,*,#238662,.T.); +#238684 = ORIENTED_EDGE('',*,*,#238685,.T.); +#238685 = EDGE_CURVE('',#238655,#238686,#238688,.T.); +#238686 = VERTEX_POINT('',#238687); +#238687 = CARTESIAN_POINT('',(129.272344,-102.842303,-3.5E-02)); +#238688 = LINE('',#238689,#238690); +#238689 = CARTESIAN_POINT('',(129.272344,-102.306227,-3.5E-02)); +#238690 = VECTOR('',#238691,1.); +#238691 = DIRECTION('',(0.,-1.,0.)); +#238692 = ORIENTED_EDGE('',*,*,#238693,.F.); +#238693 = EDGE_CURVE('',#238694,#238686,#238696,.T.); +#238694 = VERTEX_POINT('',#238695); +#238695 = CARTESIAN_POINT('',(129.272344,-102.842303,0.)); +#238696 = LINE('',#238697,#238698); +#238697 = CARTESIAN_POINT('',(129.272344,-102.842303,0.)); +#238698 = VECTOR('',#238699,1.); +#238699 = DIRECTION('',(0.,0.,-1.)); +#238700 = ORIENTED_EDGE('',*,*,#238701,.F.); +#238701 = EDGE_CURVE('',#238663,#238694,#238702,.T.); +#238702 = LINE('',#238703,#238704); +#238703 = CARTESIAN_POINT('',(129.272344,-102.306227,0.)); +#238704 = VECTOR('',#238705,1.); +#238705 = DIRECTION('',(0.,-1.,0.)); +#238706 = PLANE('',#238707); +#238707 = AXIS2_PLACEMENT_3D('',#238708,#238709,#238710); +#238708 = CARTESIAN_POINT('',(129.272344,-102.306227,0.)); +#238709 = DIRECTION('',(-1.,-0.,-0.)); +#238710 = DIRECTION('',(0.,-1.,0.)); +#238711 = ADVANCED_FACE('',(#238712),#238737,.F.); +#238712 = FACE_BOUND('',#238713,.F.); +#238713 = EDGE_LOOP('',(#238714,#238715,#238723,#238731)); +#238714 = ORIENTED_EDGE('',*,*,#238693,.T.); +#238715 = ORIENTED_EDGE('',*,*,#238716,.T.); +#238716 = EDGE_CURVE('',#238686,#238717,#238719,.T.); +#238717 = VERTEX_POINT('',#238718); +#238718 = CARTESIAN_POINT('',(129.257413,-102.878351,-3.5E-02)); +#238719 = LINE('',#238720,#238721); +#238720 = CARTESIAN_POINT('',(129.272344,-102.842303,-3.5E-02)); +#238721 = VECTOR('',#238722,1.); +#238722 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#238723 = ORIENTED_EDGE('',*,*,#238724,.F.); +#238724 = EDGE_CURVE('',#238725,#238717,#238727,.T.); +#238725 = VERTEX_POINT('',#238726); +#238726 = CARTESIAN_POINT('',(129.257413,-102.878351,0.)); +#238727 = LINE('',#238728,#238729); +#238728 = CARTESIAN_POINT('',(129.257413,-102.878351,0.)); +#238729 = VECTOR('',#238730,1.); +#238730 = DIRECTION('',(0.,0.,-1.)); +#238731 = ORIENTED_EDGE('',*,*,#238732,.F.); +#238732 = EDGE_CURVE('',#238694,#238725,#238733,.T.); +#238733 = LINE('',#238734,#238735); +#238734 = CARTESIAN_POINT('',(129.272344,-102.842303,0.)); +#238735 = VECTOR('',#238736,1.); +#238736 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#238737 = PLANE('',#238738); +#238738 = AXIS2_PLACEMENT_3D('',#238739,#238740,#238741); +#238739 = CARTESIAN_POINT('',(129.272344,-102.842303,0.)); +#238740 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#238741 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#238742 = ADVANCED_FACE('',(#238743),#238768,.F.); +#238743 = FACE_BOUND('',#238744,.F.); +#238744 = EDGE_LOOP('',(#238745,#238746,#238754,#238762)); +#238745 = ORIENTED_EDGE('',*,*,#238724,.T.); +#238746 = ORIENTED_EDGE('',*,*,#238747,.T.); +#238747 = EDGE_CURVE('',#238717,#238748,#238750,.T.); +#238748 = VERTEX_POINT('',#238749); +#238749 = CARTESIAN_POINT('',(128.396741,-103.741739,-3.5E-02)); +#238750 = LINE('',#238751,#238752); +#238751 = CARTESIAN_POINT('',(129.257413,-102.878351,-3.5E-02)); +#238752 = VECTOR('',#238753,1.); +#238753 = DIRECTION('',(-0.705991963625,-0.708219843902,0.)); +#238754 = ORIENTED_EDGE('',*,*,#238755,.F.); +#238755 = EDGE_CURVE('',#238756,#238748,#238758,.T.); +#238756 = VERTEX_POINT('',#238757); +#238757 = CARTESIAN_POINT('',(128.396741,-103.741739,0.)); +#238758 = LINE('',#238759,#238760); +#238759 = CARTESIAN_POINT('',(128.396741,-103.741739,0.)); +#238760 = VECTOR('',#238761,1.); +#238761 = DIRECTION('',(0.,0.,-1.)); +#238762 = ORIENTED_EDGE('',*,*,#238763,.F.); +#238763 = EDGE_CURVE('',#238725,#238756,#238764,.T.); +#238764 = LINE('',#238765,#238766); +#238765 = CARTESIAN_POINT('',(129.257413,-102.878351,0.)); +#238766 = VECTOR('',#238767,1.); +#238767 = DIRECTION('',(-0.705991963625,-0.708219843902,0.)); +#238768 = PLANE('',#238769); +#238769 = AXIS2_PLACEMENT_3D('',#238770,#238771,#238772); +#238770 = CARTESIAN_POINT('',(129.257413,-102.878351,0.)); +#238771 = DIRECTION('',(-0.708219843902,0.705991963625,0.)); +#238772 = DIRECTION('',(-0.705991963625,-0.708219843902,0.)); +#238773 = ADVANCED_FACE('',(#238774),#238801,.T.); +#238774 = FACE_BOUND('',#238775,.F.); +#238775 = EDGE_LOOP('',(#238776,#238777,#238786,#238794)); +#238776 = ORIENTED_EDGE('',*,*,#238755,.T.); +#238777 = ORIENTED_EDGE('',*,*,#238778,.T.); +#238778 = EDGE_CURVE('',#238748,#238779,#238781,.T.); +#238779 = VERTEX_POINT('',#238780); +#238780 = CARTESIAN_POINT('',(128.282628,-103.938006,-3.5E-02)); +#238781 = CIRCLE('',#238782,0.296617750895); +#238782 = AXIS2_PLACEMENT_3D('',#238783,#238784,#238785); +#238783 = CARTESIAN_POINT('',(128.102779497,-103.702131868,-3.5E-02)); +#238784 = DIRECTION('',(0.,0.,-1.)); +#238785 = DIRECTION('',(0.991044878849,-0.1335292032,0.)); +#238786 = ORIENTED_EDGE('',*,*,#238787,.F.); +#238787 = EDGE_CURVE('',#238788,#238779,#238790,.T.); +#238788 = VERTEX_POINT('',#238789); +#238789 = CARTESIAN_POINT('',(128.282628,-103.938006,0.)); +#238790 = LINE('',#238791,#238792); +#238791 = CARTESIAN_POINT('',(128.282628,-103.938006,0.)); +#238792 = VECTOR('',#238793,1.); +#238793 = DIRECTION('',(0.,0.,-1.)); +#238794 = ORIENTED_EDGE('',*,*,#238795,.F.); +#238795 = EDGE_CURVE('',#238756,#238788,#238796,.T.); +#238796 = CIRCLE('',#238797,0.296617750895); +#238797 = AXIS2_PLACEMENT_3D('',#238798,#238799,#238800); +#238798 = CARTESIAN_POINT('',(128.102779497,-103.702131868,0.)); +#238799 = DIRECTION('',(0.,0.,-1.)); +#238800 = DIRECTION('',(0.991044878849,-0.1335292032,0.)); +#238801 = CYLINDRICAL_SURFACE('',#238802,0.296617750895); +#238802 = AXIS2_PLACEMENT_3D('',#238803,#238804,#238805); +#238803 = CARTESIAN_POINT('',(128.102779497,-103.702131868,0.)); +#238804 = DIRECTION('',(-0.,-0.,1.)); +#238805 = DIRECTION('',(0.991044878849,-0.1335292032,0.)); +#238806 = ADVANCED_FACE('',(#238807),#238832,.F.); +#238807 = FACE_BOUND('',#238808,.F.); +#238808 = EDGE_LOOP('',(#238809,#238810,#238818,#238826)); +#238809 = ORIENTED_EDGE('',*,*,#238787,.T.); +#238810 = ORIENTED_EDGE('',*,*,#238811,.T.); +#238811 = EDGE_CURVE('',#238779,#238812,#238814,.T.); +#238812 = VERTEX_POINT('',#238813); +#238813 = CARTESIAN_POINT('',(128.214805,-103.977164,-3.5E-02)); +#238814 = LINE('',#238815,#238816); +#238815 = CARTESIAN_POINT('',(128.282628,-103.938006,-3.5E-02)); +#238816 = VECTOR('',#238817,1.); +#238817 = DIRECTION('',(-0.866023343127,-0.500003569146,0.)); +#238818 = ORIENTED_EDGE('',*,*,#238819,.F.); +#238819 = EDGE_CURVE('',#238820,#238812,#238822,.T.); +#238820 = VERTEX_POINT('',#238821); +#238821 = CARTESIAN_POINT('',(128.214805,-103.977164,0.)); +#238822 = LINE('',#238823,#238824); +#238823 = CARTESIAN_POINT('',(128.214805,-103.977164,0.)); +#238824 = VECTOR('',#238825,1.); +#238825 = DIRECTION('',(0.,0.,-1.)); +#238826 = ORIENTED_EDGE('',*,*,#238827,.F.); +#238827 = EDGE_CURVE('',#238788,#238820,#238828,.T.); +#238828 = LINE('',#238829,#238830); +#238829 = CARTESIAN_POINT('',(128.282628,-103.938006,0.)); +#238830 = VECTOR('',#238831,1.); +#238831 = DIRECTION('',(-0.866023343127,-0.500003569146,0.)); +#238832 = PLANE('',#238833); +#238833 = AXIS2_PLACEMENT_3D('',#238834,#238835,#238836); +#238834 = CARTESIAN_POINT('',(128.282628,-103.938006,0.)); +#238835 = DIRECTION('',(-0.500003569146,0.866023343127,0.)); +#238836 = DIRECTION('',(-0.866023343127,-0.500003569146,0.)); +#238837 = ADVANCED_FACE('',(#238838),#238865,.T.); +#238838 = FACE_BOUND('',#238839,.F.); +#238839 = EDGE_LOOP('',(#238840,#238841,#238850,#238858)); +#238840 = ORIENTED_EDGE('',*,*,#238819,.T.); +#238841 = ORIENTED_EDGE('',*,*,#238842,.T.); +#238842 = EDGE_CURVE('',#238812,#238843,#238845,.T.); +#238843 = VERTEX_POINT('',#238844); +#238844 = CARTESIAN_POINT('',(128.3381,-103.517536,-3.5E-02)); +#238845 = CIRCLE('',#238846,0.299991180488); +#238846 = AXIS2_PLACEMENT_3D('',#238847,#238848,#238849); +#238847 = CARTESIAN_POINT('',(128.09998970878,-103.7000139372,-3.5E-02) + ); +#238848 = DIRECTION('',(0.,0.,-1.)); +#238849 = DIRECTION('',(0.382728888987,-0.923860702452,0.)); +#238850 = ORIENTED_EDGE('',*,*,#238851,.F.); +#238851 = EDGE_CURVE('',#238852,#238843,#238854,.T.); +#238852 = VERTEX_POINT('',#238853); +#238853 = CARTESIAN_POINT('',(128.3381,-103.517536,0.)); +#238854 = LINE('',#238855,#238856); +#238855 = CARTESIAN_POINT('',(128.3381,-103.517536,0.)); +#238856 = VECTOR('',#238857,1.); +#238857 = DIRECTION('',(0.,0.,-1.)); +#238858 = ORIENTED_EDGE('',*,*,#238859,.F.); +#238859 = EDGE_CURVE('',#238820,#238852,#238860,.T.); +#238860 = CIRCLE('',#238861,0.299991180488); +#238861 = AXIS2_PLACEMENT_3D('',#238862,#238863,#238864); +#238862 = CARTESIAN_POINT('',(128.09998970878,-103.7000139372,0.)); +#238863 = DIRECTION('',(0.,0.,-1.)); +#238864 = DIRECTION('',(0.382728888987,-0.923860702452,0.)); +#238865 = CYLINDRICAL_SURFACE('',#238866,0.299991180488); +#238866 = AXIS2_PLACEMENT_3D('',#238867,#238868,#238869); +#238867 = CARTESIAN_POINT('',(128.09998970878,-103.7000139372,0.)); +#238868 = DIRECTION('',(-0.,-0.,1.)); +#238869 = DIRECTION('',(0.382728888987,-0.923860702452,0.)); +#238870 = ADVANCED_FACE('',(#238871),#238896,.F.); +#238871 = FACE_BOUND('',#238872,.F.); +#238872 = EDGE_LOOP('',(#238873,#238874,#238882,#238890)); +#238873 = ORIENTED_EDGE('',*,*,#238851,.T.); +#238874 = ORIENTED_EDGE('',*,*,#238875,.T.); +#238875 = EDGE_CURVE('',#238843,#238876,#238878,.T.); +#238876 = VERTEX_POINT('',#238877); +#238877 = CARTESIAN_POINT('',(129.074265,-102.781372,-3.5E-02)); +#238878 = LINE('',#238879,#238880); +#238879 = CARTESIAN_POINT('',(128.3381,-103.517536,-3.5E-02)); +#238880 = VECTOR('',#238881,1.); +#238881 = DIRECTION('',(0.70710726145,0.707106300922,0.)); +#238882 = ORIENTED_EDGE('',*,*,#238883,.F.); +#238883 = EDGE_CURVE('',#238884,#238876,#238886,.T.); +#238884 = VERTEX_POINT('',#238885); +#238885 = CARTESIAN_POINT('',(129.074265,-102.781372,0.)); +#238886 = LINE('',#238887,#238888); +#238887 = CARTESIAN_POINT('',(129.074265,-102.781372,0.)); +#238888 = VECTOR('',#238889,1.); +#238889 = DIRECTION('',(0.,0.,-1.)); +#238890 = ORIENTED_EDGE('',*,*,#238891,.F.); +#238891 = EDGE_CURVE('',#238852,#238884,#238892,.T.); +#238892 = LINE('',#238893,#238894); +#238893 = CARTESIAN_POINT('',(128.3381,-103.517536,0.)); +#238894 = VECTOR('',#238895,1.); +#238895 = DIRECTION('',(0.70710726145,0.707106300922,0.)); +#238896 = PLANE('',#238897); +#238897 = AXIS2_PLACEMENT_3D('',#238898,#238899,#238900); +#238898 = CARTESIAN_POINT('',(128.3381,-103.517536,0.)); +#238899 = DIRECTION('',(0.707106300922,-0.70710726145,0.)); +#238900 = DIRECTION('',(0.70710726145,0.707106300922,0.)); +#238901 = ADVANCED_FACE('',(#238902),#238927,.F.); +#238902 = FACE_BOUND('',#238903,.F.); +#238903 = EDGE_LOOP('',(#238904,#238905,#238913,#238921)); +#238904 = ORIENTED_EDGE('',*,*,#238883,.T.); +#238905 = ORIENTED_EDGE('',*,*,#238906,.T.); +#238906 = EDGE_CURVE('',#238876,#238907,#238909,.T.); +#238907 = VERTEX_POINT('',#238908); +#238908 = CARTESIAN_POINT('',(129.074265,-102.367158,-3.5E-02)); +#238909 = LINE('',#238910,#238911); +#238910 = CARTESIAN_POINT('',(129.074265,-102.781372,-3.5E-02)); +#238911 = VECTOR('',#238912,1.); +#238912 = DIRECTION('',(0.,1.,0.)); +#238913 = ORIENTED_EDGE('',*,*,#238914,.F.); +#238914 = EDGE_CURVE('',#238915,#238907,#238917,.T.); +#238915 = VERTEX_POINT('',#238916); +#238916 = CARTESIAN_POINT('',(129.074265,-102.367158,0.)); +#238917 = LINE('',#238918,#238919); +#238918 = CARTESIAN_POINT('',(129.074265,-102.367158,0.)); +#238919 = VECTOR('',#238920,1.); +#238920 = DIRECTION('',(0.,0.,-1.)); +#238921 = ORIENTED_EDGE('',*,*,#238922,.F.); +#238922 = EDGE_CURVE('',#238884,#238915,#238923,.T.); +#238923 = LINE('',#238924,#238925); +#238924 = CARTESIAN_POINT('',(129.074265,-102.781372,0.)); +#238925 = VECTOR('',#238926,1.); +#238926 = DIRECTION('',(0.,1.,0.)); +#238927 = PLANE('',#238928); +#238928 = AXIS2_PLACEMENT_3D('',#238929,#238930,#238931); +#238929 = CARTESIAN_POINT('',(129.074265,-102.781372,0.)); +#238930 = DIRECTION('',(1.,-0.,0.)); +#238931 = DIRECTION('',(0.,1.,0.)); +#238932 = ADVANCED_FACE('',(#238933),#238958,.F.); +#238933 = FACE_BOUND('',#238934,.F.); +#238934 = EDGE_LOOP('',(#238935,#238936,#238944,#238952)); +#238935 = ORIENTED_EDGE('',*,*,#238914,.T.); +#238936 = ORIENTED_EDGE('',*,*,#238937,.T.); +#238937 = EDGE_CURVE('',#238907,#238938,#238940,.T.); +#238938 = VERTEX_POINT('',#238939); +#238939 = CARTESIAN_POINT('',(128.966853,-102.257028,-3.5E-02)); +#238940 = LINE('',#238941,#238942); +#238941 = CARTESIAN_POINT('',(129.074265,-102.367158,-3.5E-02)); +#238942 = VECTOR('',#238943,1.); +#238943 = DIRECTION('',(-0.698217595748,0.715885597696,0.)); +#238944 = ORIENTED_EDGE('',*,*,#238945,.F.); +#238945 = EDGE_CURVE('',#238946,#238938,#238948,.T.); +#238946 = VERTEX_POINT('',#238947); +#238947 = CARTESIAN_POINT('',(128.966853,-102.257028,0.)); +#238948 = LINE('',#238949,#238950); +#238949 = CARTESIAN_POINT('',(128.966853,-102.257028,0.)); +#238950 = VECTOR('',#238951,1.); +#238951 = DIRECTION('',(0.,0.,-1.)); +#238952 = ORIENTED_EDGE('',*,*,#238953,.F.); +#238953 = EDGE_CURVE('',#238915,#238946,#238954,.T.); +#238954 = LINE('',#238955,#238956); +#238955 = CARTESIAN_POINT('',(129.074265,-102.367158,0.)); +#238956 = VECTOR('',#238957,1.); +#238957 = DIRECTION('',(-0.698217595748,0.715885597696,0.)); +#238958 = PLANE('',#238959); +#238959 = AXIS2_PLACEMENT_3D('',#238960,#238961,#238962); +#238960 = CARTESIAN_POINT('',(129.074265,-102.367158,0.)); +#238961 = DIRECTION('',(0.715885597696,0.698217595748,0.)); +#238962 = DIRECTION('',(-0.698217595748,0.715885597696,0.)); +#238963 = ADVANCED_FACE('',(#238964),#238989,.F.); +#238964 = FACE_BOUND('',#238965,.F.); +#238965 = EDGE_LOOP('',(#238966,#238967,#238975,#238983)); +#238966 = ORIENTED_EDGE('',*,*,#238945,.T.); +#238967 = ORIENTED_EDGE('',*,*,#238968,.T.); +#238968 = EDGE_CURVE('',#238938,#238969,#238971,.T.); +#238969 = VERTEX_POINT('',#238970); +#238970 = CARTESIAN_POINT('',(128.951921,-102.22098,-3.5E-02)); +#238971 = LINE('',#238972,#238973); +#238972 = CARTESIAN_POINT('',(128.966853,-102.257028,-3.5E-02)); +#238973 = VECTOR('',#238974,1.); +#238974 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#238975 = ORIENTED_EDGE('',*,*,#238976,.F.); +#238976 = EDGE_CURVE('',#238977,#238969,#238979,.T.); +#238977 = VERTEX_POINT('',#238978); +#238978 = CARTESIAN_POINT('',(128.951921,-102.22098,0.)); +#238979 = LINE('',#238980,#238981); +#238980 = CARTESIAN_POINT('',(128.951921,-102.22098,0.)); +#238981 = VECTOR('',#238982,1.); +#238982 = DIRECTION('',(0.,0.,-1.)); +#238983 = ORIENTED_EDGE('',*,*,#238984,.F.); +#238984 = EDGE_CURVE('',#238946,#238977,#238985,.T.); +#238985 = LINE('',#238986,#238987); +#238986 = CARTESIAN_POINT('',(128.966853,-102.257028,0.)); +#238987 = VECTOR('',#238988,1.); +#238988 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#238989 = PLANE('',#238990); +#238990 = AXIS2_PLACEMENT_3D('',#238991,#238992,#238993); +#238991 = CARTESIAN_POINT('',(128.966853,-102.257028,0.)); +#238992 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#238993 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#238994 = ADVANCED_FACE('',(#238995),#239020,.F.); +#238995 = FACE_BOUND('',#238996,.F.); +#238996 = EDGE_LOOP('',(#238997,#238998,#239006,#239014)); +#238997 = ORIENTED_EDGE('',*,*,#238976,.T.); +#238998 = ORIENTED_EDGE('',*,*,#238999,.T.); +#238999 = EDGE_CURVE('',#238969,#239000,#239002,.T.); +#239000 = VERTEX_POINT('',#239001); +#239001 = CARTESIAN_POINT('',(128.951921,-99.630491,-3.5E-02)); +#239002 = LINE('',#239003,#239004); +#239003 = CARTESIAN_POINT('',(128.951921,-102.22098,-3.5E-02)); +#239004 = VECTOR('',#239005,1.); +#239005 = DIRECTION('',(0.,1.,0.)); +#239006 = ORIENTED_EDGE('',*,*,#239007,.F.); +#239007 = EDGE_CURVE('',#239008,#239000,#239010,.T.); +#239008 = VERTEX_POINT('',#239009); +#239009 = CARTESIAN_POINT('',(128.951921,-99.630491,0.)); +#239010 = LINE('',#239011,#239012); +#239011 = CARTESIAN_POINT('',(128.951921,-99.630491,0.)); +#239012 = VECTOR('',#239013,1.); +#239013 = DIRECTION('',(0.,0.,-1.)); +#239014 = ORIENTED_EDGE('',*,*,#239015,.F.); +#239015 = EDGE_CURVE('',#238977,#239008,#239016,.T.); +#239016 = LINE('',#239017,#239018); +#239017 = CARTESIAN_POINT('',(128.951921,-102.22098,0.)); +#239018 = VECTOR('',#239019,1.); +#239019 = DIRECTION('',(0.,1.,0.)); +#239020 = PLANE('',#239021); +#239021 = AXIS2_PLACEMENT_3D('',#239022,#239023,#239024); +#239022 = CARTESIAN_POINT('',(128.951921,-102.22098,0.)); +#239023 = DIRECTION('',(1.,-0.,0.)); +#239024 = DIRECTION('',(0.,1.,0.)); +#239025 = ADVANCED_FACE('',(#239026),#239051,.F.); +#239026 = FACE_BOUND('',#239027,.F.); +#239027 = EDGE_LOOP('',(#239028,#239029,#239037,#239045)); +#239028 = ORIENTED_EDGE('',*,*,#239007,.T.); +#239029 = ORIENTED_EDGE('',*,*,#239030,.T.); +#239030 = EDGE_CURVE('',#239000,#239031,#239033,.T.); +#239031 = VERTEX_POINT('',#239032); +#239032 = CARTESIAN_POINT('',(128.966853,-99.594443,-3.5E-02)); +#239033 = LINE('',#239034,#239035); +#239034 = CARTESIAN_POINT('',(128.951921,-99.630491,-3.5E-02)); +#239035 = VECTOR('',#239036,1.); +#239036 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239037 = ORIENTED_EDGE('',*,*,#239038,.F.); +#239038 = EDGE_CURVE('',#239039,#239031,#239041,.T.); +#239039 = VERTEX_POINT('',#239040); +#239040 = CARTESIAN_POINT('',(128.966853,-99.594443,0.)); +#239041 = LINE('',#239042,#239043); +#239042 = CARTESIAN_POINT('',(128.966853,-99.594443,0.)); +#239043 = VECTOR('',#239044,1.); +#239044 = DIRECTION('',(0.,0.,-1.)); +#239045 = ORIENTED_EDGE('',*,*,#239046,.F.); +#239046 = EDGE_CURVE('',#239008,#239039,#239047,.T.); +#239047 = LINE('',#239048,#239049); +#239048 = CARTESIAN_POINT('',(128.951921,-99.630491,0.)); +#239049 = VECTOR('',#239050,1.); +#239050 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239051 = PLANE('',#239052); +#239052 = AXIS2_PLACEMENT_3D('',#239053,#239054,#239055); +#239053 = CARTESIAN_POINT('',(128.951921,-99.630491,0.)); +#239054 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#239055 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239056 = ADVANCED_FACE('',(#239057),#239082,.F.); +#239057 = FACE_BOUND('',#239058,.F.); +#239058 = EDGE_LOOP('',(#239059,#239060,#239068,#239076)); +#239059 = ORIENTED_EDGE('',*,*,#239038,.T.); +#239060 = ORIENTED_EDGE('',*,*,#239061,.T.); +#239061 = EDGE_CURVE('',#239031,#239062,#239064,.T.); +#239062 = VERTEX_POINT('',#239063); +#239063 = CARTESIAN_POINT('',(133.8,-94.758578,-3.5E-02)); +#239064 = LINE('',#239065,#239066); +#239065 = CARTESIAN_POINT('',(128.966853,-99.594443,-3.5E-02)); +#239066 = VECTOR('',#239067,1.); +#239067 = DIRECTION('',(0.706907982562,0.707305523936,0.)); +#239068 = ORIENTED_EDGE('',*,*,#239069,.F.); +#239069 = EDGE_CURVE('',#239070,#239062,#239072,.T.); +#239070 = VERTEX_POINT('',#239071); +#239071 = CARTESIAN_POINT('',(133.8,-94.758578,0.)); +#239072 = LINE('',#239073,#239074); +#239073 = CARTESIAN_POINT('',(133.8,-94.758578,0.)); +#239074 = VECTOR('',#239075,1.); +#239075 = DIRECTION('',(0.,0.,-1.)); +#239076 = ORIENTED_EDGE('',*,*,#239077,.F.); +#239077 = EDGE_CURVE('',#239039,#239070,#239078,.T.); +#239078 = LINE('',#239079,#239080); +#239079 = CARTESIAN_POINT('',(128.966853,-99.594443,0.)); +#239080 = VECTOR('',#239081,1.); +#239081 = DIRECTION('',(0.706907982562,0.707305523936,0.)); +#239082 = PLANE('',#239083); +#239083 = AXIS2_PLACEMENT_3D('',#239084,#239085,#239086); +#239084 = CARTESIAN_POINT('',(128.966853,-99.594443,0.)); +#239085 = DIRECTION('',(0.707305523936,-0.706907982562,0.)); +#239086 = DIRECTION('',(0.706907982562,0.707305523936,0.)); +#239087 = ADVANCED_FACE('',(#239088),#239113,.F.); +#239088 = FACE_BOUND('',#239089,.F.); +#239089 = EDGE_LOOP('',(#239090,#239091,#239099,#239107)); +#239090 = ORIENTED_EDGE('',*,*,#239069,.T.); +#239091 = ORIENTED_EDGE('',*,*,#239092,.T.); +#239092 = EDGE_CURVE('',#239062,#239093,#239095,.T.); +#239093 = VERTEX_POINT('',#239094); +#239094 = CARTESIAN_POINT('',(133.8,-94.192892,-3.5E-02)); +#239095 = LINE('',#239096,#239097); +#239096 = CARTESIAN_POINT('',(133.8,-94.758578,-3.5E-02)); +#239097 = VECTOR('',#239098,1.); +#239098 = DIRECTION('',(0.,1.,0.)); +#239099 = ORIENTED_EDGE('',*,*,#239100,.F.); +#239100 = EDGE_CURVE('',#239101,#239093,#239103,.T.); +#239101 = VERTEX_POINT('',#239102); +#239102 = CARTESIAN_POINT('',(133.8,-94.192892,0.)); +#239103 = LINE('',#239104,#239105); +#239104 = CARTESIAN_POINT('',(133.8,-94.192892,0.)); +#239105 = VECTOR('',#239106,1.); +#239106 = DIRECTION('',(0.,0.,-1.)); +#239107 = ORIENTED_EDGE('',*,*,#239108,.F.); +#239108 = EDGE_CURVE('',#239070,#239101,#239109,.T.); +#239109 = LINE('',#239110,#239111); +#239110 = CARTESIAN_POINT('',(133.8,-94.758578,0.)); +#239111 = VECTOR('',#239112,1.); +#239112 = DIRECTION('',(0.,1.,0.)); +#239113 = PLANE('',#239114); +#239114 = AXIS2_PLACEMENT_3D('',#239115,#239116,#239117); +#239115 = CARTESIAN_POINT('',(133.8,-94.758578,0.)); +#239116 = DIRECTION('',(1.,-0.,0.)); +#239117 = DIRECTION('',(0.,1.,0.)); +#239118 = ADVANCED_FACE('',(#239119),#239144,.F.); +#239119 = FACE_BOUND('',#239120,.F.); +#239120 = EDGE_LOOP('',(#239121,#239122,#239130,#239138)); +#239121 = ORIENTED_EDGE('',*,*,#239100,.T.); +#239122 = ORIENTED_EDGE('',*,*,#239123,.T.); +#239123 = EDGE_CURVE('',#239093,#239124,#239126,.T.); +#239124 = VERTEX_POINT('',#239125); +#239125 = CARTESIAN_POINT('',(132.666853,-93.057028,-3.5E-02)); +#239126 = LINE('',#239127,#239128); +#239127 = CARTESIAN_POINT('',(133.8,-94.192892,-3.5E-02)); +#239128 = VECTOR('',#239129,1.); +#239129 = DIRECTION('',(-0.706259558317,0.707952990167,0.)); +#239130 = ORIENTED_EDGE('',*,*,#239131,.F.); +#239131 = EDGE_CURVE('',#239132,#239124,#239134,.T.); +#239132 = VERTEX_POINT('',#239133); +#239133 = CARTESIAN_POINT('',(132.666853,-93.057028,0.)); +#239134 = LINE('',#239135,#239136); +#239135 = CARTESIAN_POINT('',(132.666853,-93.057028,0.)); +#239136 = VECTOR('',#239137,1.); +#239137 = DIRECTION('',(0.,0.,-1.)); +#239138 = ORIENTED_EDGE('',*,*,#239139,.F.); +#239139 = EDGE_CURVE('',#239101,#239132,#239140,.T.); +#239140 = LINE('',#239141,#239142); +#239141 = CARTESIAN_POINT('',(133.8,-94.192892,0.)); +#239142 = VECTOR('',#239143,1.); +#239143 = DIRECTION('',(-0.706259558317,0.707952990167,0.)); +#239144 = PLANE('',#239145); +#239145 = AXIS2_PLACEMENT_3D('',#239146,#239147,#239148); +#239146 = CARTESIAN_POINT('',(133.8,-94.192892,0.)); +#239147 = DIRECTION('',(0.707952990167,0.706259558317,0.)); +#239148 = DIRECTION('',(-0.706259558317,0.707952990167,0.)); +#239149 = ADVANCED_FACE('',(#239150),#239175,.F.); +#239150 = FACE_BOUND('',#239151,.F.); +#239151 = EDGE_LOOP('',(#239152,#239153,#239161,#239169)); +#239152 = ORIENTED_EDGE('',*,*,#239131,.T.); +#239153 = ORIENTED_EDGE('',*,*,#239154,.T.); +#239154 = EDGE_CURVE('',#239124,#239155,#239157,.T.); +#239155 = VERTEX_POINT('',#239156); +#239156 = CARTESIAN_POINT('',(132.651921,-93.02098,-3.5E-02)); +#239157 = LINE('',#239158,#239159); +#239158 = CARTESIAN_POINT('',(132.666853,-93.057028,-3.5E-02)); +#239159 = VECTOR('',#239160,1.); +#239160 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#239161 = ORIENTED_EDGE('',*,*,#239162,.F.); +#239162 = EDGE_CURVE('',#239163,#239155,#239165,.T.); +#239163 = VERTEX_POINT('',#239164); +#239164 = CARTESIAN_POINT('',(132.651921,-93.02098,0.)); +#239165 = LINE('',#239166,#239167); +#239166 = CARTESIAN_POINT('',(132.651921,-93.02098,0.)); +#239167 = VECTOR('',#239168,1.); +#239168 = DIRECTION('',(0.,0.,-1.)); +#239169 = ORIENTED_EDGE('',*,*,#239170,.F.); +#239170 = EDGE_CURVE('',#239132,#239163,#239171,.T.); +#239171 = LINE('',#239172,#239173); +#239172 = CARTESIAN_POINT('',(132.666853,-93.057028,0.)); +#239173 = VECTOR('',#239174,1.); +#239174 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#239175 = PLANE('',#239176); +#239176 = AXIS2_PLACEMENT_3D('',#239177,#239178,#239179); +#239177 = CARTESIAN_POINT('',(132.666853,-93.057028,0.)); +#239178 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#239179 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#239180 = ADVANCED_FACE('',(#239181),#239206,.F.); +#239181 = FACE_BOUND('',#239182,.F.); +#239182 = EDGE_LOOP('',(#239183,#239184,#239192,#239200)); +#239183 = ORIENTED_EDGE('',*,*,#239162,.T.); +#239184 = ORIENTED_EDGE('',*,*,#239185,.T.); +#239185 = EDGE_CURVE('',#239155,#239186,#239188,.T.); +#239186 = VERTEX_POINT('',#239187); +#239187 = CARTESIAN_POINT('',(132.651921,-72.330491,-3.5E-02)); +#239188 = LINE('',#239189,#239190); +#239189 = CARTESIAN_POINT('',(132.651921,-93.02098,-3.5E-02)); +#239190 = VECTOR('',#239191,1.); +#239191 = DIRECTION('',(0.,1.,0.)); +#239192 = ORIENTED_EDGE('',*,*,#239193,.F.); +#239193 = EDGE_CURVE('',#239194,#239186,#239196,.T.); +#239194 = VERTEX_POINT('',#239195); +#239195 = CARTESIAN_POINT('',(132.651921,-72.330491,0.)); +#239196 = LINE('',#239197,#239198); +#239197 = CARTESIAN_POINT('',(132.651921,-72.330491,0.)); +#239198 = VECTOR('',#239199,1.); +#239199 = DIRECTION('',(0.,0.,-1.)); +#239200 = ORIENTED_EDGE('',*,*,#239201,.F.); +#239201 = EDGE_CURVE('',#239163,#239194,#239202,.T.); +#239202 = LINE('',#239203,#239204); +#239203 = CARTESIAN_POINT('',(132.651921,-93.02098,0.)); +#239204 = VECTOR('',#239205,1.); +#239205 = DIRECTION('',(0.,1.,0.)); +#239206 = PLANE('',#239207); +#239207 = AXIS2_PLACEMENT_3D('',#239208,#239209,#239210); +#239208 = CARTESIAN_POINT('',(132.651921,-93.02098,0.)); +#239209 = DIRECTION('',(1.,-0.,0.)); +#239210 = DIRECTION('',(0.,1.,0.)); +#239211 = ADVANCED_FACE('',(#239212),#239237,.F.); +#239212 = FACE_BOUND('',#239213,.F.); +#239213 = EDGE_LOOP('',(#239214,#239215,#239223,#239231)); +#239214 = ORIENTED_EDGE('',*,*,#239193,.T.); +#239215 = ORIENTED_EDGE('',*,*,#239216,.T.); +#239216 = EDGE_CURVE('',#239186,#239217,#239219,.T.); +#239217 = VERTEX_POINT('',#239218); +#239218 = CARTESIAN_POINT('',(132.666853,-72.294443,-3.5E-02)); +#239219 = LINE('',#239220,#239221); +#239220 = CARTESIAN_POINT('',(132.651921,-72.330491,-3.5E-02)); +#239221 = VECTOR('',#239222,1.); +#239222 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239223 = ORIENTED_EDGE('',*,*,#239224,.F.); +#239224 = EDGE_CURVE('',#239225,#239217,#239227,.T.); +#239225 = VERTEX_POINT('',#239226); +#239226 = CARTESIAN_POINT('',(132.666853,-72.294443,0.)); +#239227 = LINE('',#239228,#239229); +#239228 = CARTESIAN_POINT('',(132.666853,-72.294443,0.)); +#239229 = VECTOR('',#239230,1.); +#239230 = DIRECTION('',(0.,0.,-1.)); +#239231 = ORIENTED_EDGE('',*,*,#239232,.F.); +#239232 = EDGE_CURVE('',#239194,#239225,#239233,.T.); +#239233 = LINE('',#239234,#239235); +#239234 = CARTESIAN_POINT('',(132.651921,-72.330491,0.)); +#239235 = VECTOR('',#239236,1.); +#239236 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239237 = PLANE('',#239238); +#239238 = AXIS2_PLACEMENT_3D('',#239239,#239240,#239241); +#239239 = CARTESIAN_POINT('',(132.651921,-72.330491,0.)); +#239240 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#239241 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#239242 = ADVANCED_FACE('',(#239243),#239268,.F.); +#239243 = FACE_BOUND('',#239244,.F.); +#239244 = EDGE_LOOP('',(#239245,#239246,#239254,#239262)); +#239245 = ORIENTED_EDGE('',*,*,#239224,.T.); +#239246 = ORIENTED_EDGE('',*,*,#239247,.T.); +#239247 = EDGE_CURVE('',#239217,#239248,#239250,.T.); +#239248 = VERTEX_POINT('',#239249); +#239249 = CARTESIAN_POINT('',(133.25,-71.708578,-3.5E-02)); +#239250 = LINE('',#239251,#239252); +#239251 = CARTESIAN_POINT('',(132.666853,-72.294443,-3.5E-02)); +#239252 = VECTOR('',#239253,1.); +#239253 = DIRECTION('',(0.705460822639,0.708748917263,0.)); +#239254 = ORIENTED_EDGE('',*,*,#239255,.F.); +#239255 = EDGE_CURVE('',#239256,#239248,#239258,.T.); +#239256 = VERTEX_POINT('',#239257); +#239257 = CARTESIAN_POINT('',(133.25,-71.708578,0.)); +#239258 = LINE('',#239259,#239260); +#239259 = CARTESIAN_POINT('',(133.25,-71.708578,0.)); +#239260 = VECTOR('',#239261,1.); +#239261 = DIRECTION('',(0.,0.,-1.)); +#239262 = ORIENTED_EDGE('',*,*,#239263,.F.); +#239263 = EDGE_CURVE('',#239225,#239256,#239264,.T.); +#239264 = LINE('',#239265,#239266); +#239265 = CARTESIAN_POINT('',(132.666853,-72.294443,0.)); +#239266 = VECTOR('',#239267,1.); +#239267 = DIRECTION('',(0.705460822639,0.708748917263,0.)); +#239268 = PLANE('',#239269); +#239269 = AXIS2_PLACEMENT_3D('',#239270,#239271,#239272); +#239270 = CARTESIAN_POINT('',(132.666853,-72.294443,0.)); +#239271 = DIRECTION('',(0.708748917263,-0.705460822639,0.)); +#239272 = DIRECTION('',(0.705460822639,0.708748917263,0.)); +#239273 = ADVANCED_FACE('',(#239274),#239299,.F.); +#239274 = FACE_BOUND('',#239275,.F.); +#239275 = EDGE_LOOP('',(#239276,#239277,#239285,#239293)); +#239276 = ORIENTED_EDGE('',*,*,#239255,.T.); +#239277 = ORIENTED_EDGE('',*,*,#239278,.T.); +#239278 = EDGE_CURVE('',#239248,#239279,#239281,.T.); +#239279 = VERTEX_POINT('',#239280); +#239280 = CARTESIAN_POINT('',(133.25,-70.28113,-3.5E-02)); +#239281 = LINE('',#239282,#239283); +#239282 = CARTESIAN_POINT('',(133.25,-71.708578,-3.5E-02)); +#239283 = VECTOR('',#239284,1.); +#239284 = DIRECTION('',(0.,1.,0.)); +#239285 = ORIENTED_EDGE('',*,*,#239286,.F.); +#239286 = EDGE_CURVE('',#239287,#239279,#239289,.T.); +#239287 = VERTEX_POINT('',#239288); +#239288 = CARTESIAN_POINT('',(133.25,-70.28113,0.)); +#239289 = LINE('',#239290,#239291); +#239290 = CARTESIAN_POINT('',(133.25,-70.28113,0.)); +#239291 = VECTOR('',#239292,1.); +#239292 = DIRECTION('',(0.,0.,-1.)); +#239293 = ORIENTED_EDGE('',*,*,#239294,.F.); +#239294 = EDGE_CURVE('',#239256,#239287,#239295,.T.); +#239295 = LINE('',#239296,#239297); +#239296 = CARTESIAN_POINT('',(133.25,-71.708578,0.)); +#239297 = VECTOR('',#239298,1.); +#239298 = DIRECTION('',(0.,1.,0.)); +#239299 = PLANE('',#239300); +#239300 = AXIS2_PLACEMENT_3D('',#239301,#239302,#239303); +#239301 = CARTESIAN_POINT('',(133.25,-71.708578,0.)); +#239302 = DIRECTION('',(1.,-0.,0.)); +#239303 = DIRECTION('',(0.,1.,0.)); +#239304 = ADVANCED_FACE('',(#239305),#239330,.F.); +#239305 = FACE_BOUND('',#239306,.F.); +#239306 = EDGE_LOOP('',(#239307,#239308,#239316,#239324)); +#239307 = ORIENTED_EDGE('',*,*,#239286,.T.); +#239308 = ORIENTED_EDGE('',*,*,#239309,.T.); +#239309 = EDGE_CURVE('',#239279,#239310,#239312,.T.); +#239310 = VERTEX_POINT('',#239311); +#239311 = CARTESIAN_POINT('',(133.235195,-70.277164,-3.5E-02)); +#239312 = LINE('',#239313,#239314); +#239313 = CARTESIAN_POINT('',(133.25,-70.28113,-3.5E-02)); +#239314 = VECTOR('',#239315,1.); +#239315 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#239316 = ORIENTED_EDGE('',*,*,#239317,.F.); +#239317 = EDGE_CURVE('',#239318,#239310,#239320,.T.); +#239318 = VERTEX_POINT('',#239319); +#239319 = CARTESIAN_POINT('',(133.235195,-70.277164,0.)); +#239320 = LINE('',#239321,#239322); +#239321 = CARTESIAN_POINT('',(133.235195,-70.277164,0.)); +#239322 = VECTOR('',#239323,1.); +#239323 = DIRECTION('',(0.,0.,-1.)); +#239324 = ORIENTED_EDGE('',*,*,#239325,.F.); +#239325 = EDGE_CURVE('',#239287,#239318,#239326,.T.); +#239326 = LINE('',#239327,#239328); +#239327 = CARTESIAN_POINT('',(133.25,-70.28113,0.)); +#239328 = VECTOR('',#239329,1.); +#239329 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#239330 = PLANE('',#239331); +#239331 = AXIS2_PLACEMENT_3D('',#239332,#239333,#239334); +#239332 = CARTESIAN_POINT('',(133.25,-70.28113,0.)); +#239333 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#239334 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#239335 = ADVANCED_FACE('',(#239336),#239363,.T.); +#239336 = FACE_BOUND('',#239337,.F.); +#239337 = EDGE_LOOP('',(#239338,#239339,#239348,#239356)); +#239338 = ORIENTED_EDGE('',*,*,#239317,.T.); +#239339 = ORIENTED_EDGE('',*,*,#239340,.T.); +#239340 = EDGE_CURVE('',#239310,#239341,#239343,.T.); +#239341 = VERTEX_POINT('',#239342); +#239342 = CARTESIAN_POINT('',(133.464805,-70.277164,-3.5E-02)); +#239343 = CIRCLE('',#239344,0.299999472923); +#239344 = AXIS2_PLACEMENT_3D('',#239345,#239346,#239347); +#239345 = CARTESIAN_POINT('',(133.35,-70.00000069844,-3.5E-02)); +#239346 = DIRECTION('',(0.,0.,-1.)); +#239347 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#239348 = ORIENTED_EDGE('',*,*,#239349,.F.); +#239349 = EDGE_CURVE('',#239350,#239341,#239352,.T.); +#239350 = VERTEX_POINT('',#239351); +#239351 = CARTESIAN_POINT('',(133.464805,-70.277164,0.)); +#239352 = LINE('',#239353,#239354); +#239353 = CARTESIAN_POINT('',(133.464805,-70.277164,0.)); +#239354 = VECTOR('',#239355,1.); +#239355 = DIRECTION('',(0.,0.,-1.)); +#239356 = ORIENTED_EDGE('',*,*,#239357,.F.); +#239357 = EDGE_CURVE('',#239318,#239350,#239358,.T.); +#239358 = CIRCLE('',#239359,0.299999472923); +#239359 = AXIS2_PLACEMENT_3D('',#239360,#239361,#239362); +#239360 = CARTESIAN_POINT('',(133.35,-70.00000069844,0.)); +#239361 = DIRECTION('',(0.,0.,-1.)); +#239362 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#239363 = CYLINDRICAL_SURFACE('',#239364,0.299999472923); +#239364 = AXIS2_PLACEMENT_3D('',#239365,#239366,#239367); +#239365 = CARTESIAN_POINT('',(133.35,-70.00000069844,0.)); +#239366 = DIRECTION('',(-0.,-0.,1.)); +#239367 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#239368 = ADVANCED_FACE('',(#239369),#239385,.F.); +#239369 = FACE_BOUND('',#239370,.F.); +#239370 = EDGE_LOOP('',(#239371,#239372,#239378,#239379)); +#239371 = ORIENTED_EDGE('',*,*,#239349,.T.); +#239372 = ORIENTED_EDGE('',*,*,#239373,.T.); +#239373 = EDGE_CURVE('',#239341,#238306,#239374,.T.); +#239374 = LINE('',#239375,#239376); +#239375 = CARTESIAN_POINT('',(133.464805,-70.277164,-3.5E-02)); +#239376 = VECTOR('',#239377,1.); +#239377 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#239378 = ORIENTED_EDGE('',*,*,#238303,.F.); +#239379 = ORIENTED_EDGE('',*,*,#239380,.F.); +#239380 = EDGE_CURVE('',#239350,#238304,#239381,.T.); +#239381 = LINE('',#239382,#239383); +#239382 = CARTESIAN_POINT('',(133.464805,-70.277164,0.)); +#239383 = VECTOR('',#239384,1.); +#239384 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#239385 = PLANE('',#239386); +#239386 = AXIS2_PLACEMENT_3D('',#239387,#239388,#239389); +#239387 = CARTESIAN_POINT('',(133.464805,-70.277164,0.)); +#239388 = DIRECTION('',(-0.258758913864,0.9659419364,0.)); +#239389 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#239390 = ADVANCED_FACE('',(#239391),#239418,.F.); +#239391 = FACE_BOUND('',#239392,.F.); +#239392 = EDGE_LOOP('',(#239393,#239403,#239410,#239411)); +#239393 = ORIENTED_EDGE('',*,*,#239394,.T.); +#239394 = EDGE_CURVE('',#239395,#239397,#239399,.T.); +#239395 = VERTEX_POINT('',#239396); +#239396 = CARTESIAN_POINT('',(128.237255,-103.7,0.)); +#239397 = VERTEX_POINT('',#239398); +#239398 = CARTESIAN_POINT('',(128.237255,-103.7,-3.5E-02)); +#239399 = LINE('',#239400,#239401); +#239400 = CARTESIAN_POINT('',(128.237255,-103.7,0.)); +#239401 = VECTOR('',#239402,1.); +#239402 = DIRECTION('',(0.,0.,-1.)); +#239403 = ORIENTED_EDGE('',*,*,#239404,.T.); +#239404 = EDGE_CURVE('',#239397,#239397,#239405,.T.); +#239405 = CIRCLE('',#239406,0.137255); +#239406 = AXIS2_PLACEMENT_3D('',#239407,#239408,#239409); +#239407 = CARTESIAN_POINT('',(128.1,-103.7,-3.5E-02)); +#239408 = DIRECTION('',(0.,0.,1.)); +#239409 = DIRECTION('',(1.,0.,-0.)); +#239410 = ORIENTED_EDGE('',*,*,#239394,.F.); +#239411 = ORIENTED_EDGE('',*,*,#239412,.F.); +#239412 = EDGE_CURVE('',#239395,#239395,#239413,.T.); +#239413 = CIRCLE('',#239414,0.137255); +#239414 = AXIS2_PLACEMENT_3D('',#239415,#239416,#239417); +#239415 = CARTESIAN_POINT('',(128.1,-103.7,0.)); +#239416 = DIRECTION('',(0.,0.,1.)); +#239417 = DIRECTION('',(1.,0.,-0.)); +#239418 = CYLINDRICAL_SURFACE('',#239419,0.137255); +#239419 = AXIS2_PLACEMENT_3D('',#239420,#239421,#239422); +#239420 = CARTESIAN_POINT('',(128.1,-103.7,0.)); +#239421 = DIRECTION('',(0.,0.,1.)); +#239422 = DIRECTION('',(1.,0.,-0.)); +#239423 = ADVANCED_FACE('',(#239424),#239451,.F.); +#239424 = FACE_BOUND('',#239425,.F.); +#239425 = EDGE_LOOP('',(#239426,#239436,#239443,#239444)); +#239426 = ORIENTED_EDGE('',*,*,#239427,.T.); +#239427 = EDGE_CURVE('',#239428,#239430,#239432,.T.); +#239428 = VERTEX_POINT('',#239429); +#239429 = CARTESIAN_POINT('',(133.487255,-70.,0.)); +#239430 = VERTEX_POINT('',#239431); +#239431 = CARTESIAN_POINT('',(133.487255,-70.,-3.5E-02)); +#239432 = LINE('',#239433,#239434); +#239433 = CARTESIAN_POINT('',(133.487255,-70.,0.)); +#239434 = VECTOR('',#239435,1.); +#239435 = DIRECTION('',(0.,0.,-1.)); +#239436 = ORIENTED_EDGE('',*,*,#239437,.T.); +#239437 = EDGE_CURVE('',#239430,#239430,#239438,.T.); +#239438 = CIRCLE('',#239439,0.137255); +#239439 = AXIS2_PLACEMENT_3D('',#239440,#239441,#239442); +#239440 = CARTESIAN_POINT('',(133.35,-70.,-3.5E-02)); +#239441 = DIRECTION('',(0.,0.,1.)); +#239442 = DIRECTION('',(1.,0.,-0.)); +#239443 = ORIENTED_EDGE('',*,*,#239427,.F.); +#239444 = ORIENTED_EDGE('',*,*,#239445,.F.); +#239445 = EDGE_CURVE('',#239428,#239428,#239446,.T.); +#239446 = CIRCLE('',#239447,0.137255); +#239447 = AXIS2_PLACEMENT_3D('',#239448,#239449,#239450); +#239448 = CARTESIAN_POINT('',(133.35,-70.,0.)); +#239449 = DIRECTION('',(0.,0.,1.)); +#239450 = DIRECTION('',(1.,0.,-0.)); +#239451 = CYLINDRICAL_SURFACE('',#239452,0.137255); +#239452 = AXIS2_PLACEMENT_3D('',#239453,#239454,#239455); +#239453 = CARTESIAN_POINT('',(133.35,-70.,0.)); +#239454 = DIRECTION('',(0.,0.,1.)); +#239455 = DIRECTION('',(1.,0.,-0.)); +#239456 = ADVANCED_FACE('',(#239457,#239494,#239497),#239500,.F.); +#239457 = FACE_BOUND('',#239458,.F.); +#239458 = EDGE_LOOP('',(#239459,#239460,#239461,#239462,#239463,#239464, + #239465,#239466,#239467,#239468,#239469,#239470,#239471,#239472, + #239473,#239474,#239475,#239476,#239477,#239478,#239479,#239480, + #239481,#239482,#239483,#239484,#239485,#239486,#239487,#239488, + #239489,#239490,#239491,#239492,#239493)); +#239459 = ORIENTED_EDGE('',*,*,#238329,.T.); +#239460 = ORIENTED_EDGE('',*,*,#238360,.T.); +#239461 = ORIENTED_EDGE('',*,*,#238391,.T.); +#239462 = ORIENTED_EDGE('',*,*,#238422,.T.); +#239463 = ORIENTED_EDGE('',*,*,#238453,.T.); +#239464 = ORIENTED_EDGE('',*,*,#238484,.T.); +#239465 = ORIENTED_EDGE('',*,*,#238515,.T.); +#239466 = ORIENTED_EDGE('',*,*,#238546,.T.); +#239467 = ORIENTED_EDGE('',*,*,#238577,.T.); +#239468 = ORIENTED_EDGE('',*,*,#238608,.T.); +#239469 = ORIENTED_EDGE('',*,*,#238639,.T.); +#239470 = ORIENTED_EDGE('',*,*,#238670,.T.); +#239471 = ORIENTED_EDGE('',*,*,#238701,.T.); +#239472 = ORIENTED_EDGE('',*,*,#238732,.T.); +#239473 = ORIENTED_EDGE('',*,*,#238763,.T.); +#239474 = ORIENTED_EDGE('',*,*,#238795,.T.); +#239475 = ORIENTED_EDGE('',*,*,#238827,.T.); +#239476 = ORIENTED_EDGE('',*,*,#238859,.T.); +#239477 = ORIENTED_EDGE('',*,*,#238891,.T.); +#239478 = ORIENTED_EDGE('',*,*,#238922,.T.); +#239479 = ORIENTED_EDGE('',*,*,#238953,.T.); +#239480 = ORIENTED_EDGE('',*,*,#238984,.T.); +#239481 = ORIENTED_EDGE('',*,*,#239015,.T.); +#239482 = ORIENTED_EDGE('',*,*,#239046,.T.); +#239483 = ORIENTED_EDGE('',*,*,#239077,.T.); +#239484 = ORIENTED_EDGE('',*,*,#239108,.T.); +#239485 = ORIENTED_EDGE('',*,*,#239139,.T.); +#239486 = ORIENTED_EDGE('',*,*,#239170,.T.); +#239487 = ORIENTED_EDGE('',*,*,#239201,.T.); +#239488 = ORIENTED_EDGE('',*,*,#239232,.T.); +#239489 = ORIENTED_EDGE('',*,*,#239263,.T.); +#239490 = ORIENTED_EDGE('',*,*,#239294,.T.); +#239491 = ORIENTED_EDGE('',*,*,#239325,.T.); +#239492 = ORIENTED_EDGE('',*,*,#239357,.T.); +#239493 = ORIENTED_EDGE('',*,*,#239380,.T.); +#239494 = FACE_BOUND('',#239495,.F.); +#239495 = EDGE_LOOP('',(#239496)); +#239496 = ORIENTED_EDGE('',*,*,#239412,.T.); +#239497 = FACE_BOUND('',#239498,.F.); +#239498 = EDGE_LOOP('',(#239499)); +#239499 = ORIENTED_EDGE('',*,*,#239445,.T.); +#239500 = PLANE('',#239501); +#239501 = AXIS2_PLACEMENT_3D('',#239502,#239503,#239504); +#239502 = CARTESIAN_POINT('',(0.,0.,0.)); +#239503 = DIRECTION('',(-0.,-0.,-1.)); +#239504 = DIRECTION('',(-1.,0.,0.)); +#239505 = ADVANCED_FACE('',(#239506,#239543,#239546),#239549,.T.); +#239506 = FACE_BOUND('',#239507,.T.); +#239507 = EDGE_LOOP('',(#239508,#239509,#239510,#239511,#239512,#239513, + #239514,#239515,#239516,#239517,#239518,#239519,#239520,#239521, + #239522,#239523,#239524,#239525,#239526,#239527,#239528,#239529, + #239530,#239531,#239532,#239533,#239534,#239535,#239536,#239537, + #239538,#239539,#239540,#239541,#239542)); +#239508 = ORIENTED_EDGE('',*,*,#238313,.T.); +#239509 = ORIENTED_EDGE('',*,*,#238344,.T.); +#239510 = ORIENTED_EDGE('',*,*,#238375,.T.); +#239511 = ORIENTED_EDGE('',*,*,#238406,.T.); +#239512 = ORIENTED_EDGE('',*,*,#238437,.T.); +#239513 = ORIENTED_EDGE('',*,*,#238468,.T.); +#239514 = ORIENTED_EDGE('',*,*,#238499,.T.); +#239515 = ORIENTED_EDGE('',*,*,#238530,.T.); +#239516 = ORIENTED_EDGE('',*,*,#238561,.T.); +#239517 = ORIENTED_EDGE('',*,*,#238592,.T.); +#239518 = ORIENTED_EDGE('',*,*,#238623,.T.); +#239519 = ORIENTED_EDGE('',*,*,#238654,.T.); +#239520 = ORIENTED_EDGE('',*,*,#238685,.T.); +#239521 = ORIENTED_EDGE('',*,*,#238716,.T.); +#239522 = ORIENTED_EDGE('',*,*,#238747,.T.); +#239523 = ORIENTED_EDGE('',*,*,#238778,.T.); +#239524 = ORIENTED_EDGE('',*,*,#238811,.T.); +#239525 = ORIENTED_EDGE('',*,*,#238842,.T.); +#239526 = ORIENTED_EDGE('',*,*,#238875,.T.); +#239527 = ORIENTED_EDGE('',*,*,#238906,.T.); +#239528 = ORIENTED_EDGE('',*,*,#238937,.T.); +#239529 = ORIENTED_EDGE('',*,*,#238968,.T.); +#239530 = ORIENTED_EDGE('',*,*,#238999,.T.); +#239531 = ORIENTED_EDGE('',*,*,#239030,.T.); +#239532 = ORIENTED_EDGE('',*,*,#239061,.T.); +#239533 = ORIENTED_EDGE('',*,*,#239092,.T.); +#239534 = ORIENTED_EDGE('',*,*,#239123,.T.); +#239535 = ORIENTED_EDGE('',*,*,#239154,.T.); +#239536 = ORIENTED_EDGE('',*,*,#239185,.T.); +#239537 = ORIENTED_EDGE('',*,*,#239216,.T.); +#239538 = ORIENTED_EDGE('',*,*,#239247,.T.); +#239539 = ORIENTED_EDGE('',*,*,#239278,.T.); +#239540 = ORIENTED_EDGE('',*,*,#239309,.T.); +#239541 = ORIENTED_EDGE('',*,*,#239340,.T.); +#239542 = ORIENTED_EDGE('',*,*,#239373,.T.); +#239543 = FACE_BOUND('',#239544,.T.); +#239544 = EDGE_LOOP('',(#239545)); +#239545 = ORIENTED_EDGE('',*,*,#239404,.T.); +#239546 = FACE_BOUND('',#239547,.T.); +#239547 = EDGE_LOOP('',(#239548)); +#239548 = ORIENTED_EDGE('',*,*,#239437,.T.); +#239549 = PLANE('',#239550); +#239550 = AXIS2_PLACEMENT_3D('',#239551,#239552,#239553); +#239551 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#239552 = DIRECTION('',(-0.,-0.,-1.)); +#239553 = DIRECTION('',(-1.,0.,0.)); +#239554 = MANIFOLD_SOLID_BREP('',#239555); +#239555 = CLOSED_SHELL('',(#239556,#239596,#239627,#239658,#239689, + #239720,#239751,#239784,#239815,#239846,#239877,#239908,#239939, + #239972,#239994,#240027,#240060,#240088)); +#239556 = ADVANCED_FACE('',(#239557),#239591,.T.); +#239557 = FACE_BOUND('',#239558,.T.); +#239558 = EDGE_LOOP('',(#239559,#239569,#239577,#239585)); +#239559 = ORIENTED_EDGE('',*,*,#239560,.T.); +#239560 = EDGE_CURVE('',#239561,#239563,#239565,.T.); +#239561 = VERTEX_POINT('',#239562); +#239562 = CARTESIAN_POINT('',(136.5695,-89.528078,1.51)); +#239563 = VERTEX_POINT('',#239564); +#239564 = CARTESIAN_POINT('',(136.5695,-89.528078,1.545)); +#239565 = LINE('',#239566,#239567); +#239566 = CARTESIAN_POINT('',(136.5695,-89.528078,1.51)); +#239567 = VECTOR('',#239568,1.); +#239568 = DIRECTION('',(0.,0.,1.)); +#239569 = ORIENTED_EDGE('',*,*,#239570,.T.); +#239570 = EDGE_CURVE('',#239563,#239571,#239573,.T.); +#239571 = VERTEX_POINT('',#239572); +#239572 = CARTESIAN_POINT('',(138.083147,-91.044443,1.545)); +#239573 = LINE('',#239574,#239575); +#239574 = CARTESIAN_POINT('',(136.5695,-89.528078,1.545)); +#239575 = VECTOR('',#239576,1.); +#239576 = DIRECTION('',(0.706472203679,-0.707740789717,0.)); +#239577 = ORIENTED_EDGE('',*,*,#239578,.F.); +#239578 = EDGE_CURVE('',#239579,#239571,#239581,.T.); +#239579 = VERTEX_POINT('',#239580); +#239580 = CARTESIAN_POINT('',(138.083147,-91.044443,1.51)); +#239581 = LINE('',#239582,#239583); +#239582 = CARTESIAN_POINT('',(138.083147,-91.044443,1.51)); +#239583 = VECTOR('',#239584,1.); +#239584 = DIRECTION('',(0.,0.,1.)); +#239585 = ORIENTED_EDGE('',*,*,#239586,.F.); +#239586 = EDGE_CURVE('',#239561,#239579,#239587,.T.); +#239587 = LINE('',#239588,#239589); +#239588 = CARTESIAN_POINT('',(136.5695,-89.528078,1.51)); +#239589 = VECTOR('',#239590,1.); +#239590 = DIRECTION('',(0.706472203679,-0.707740789717,0.)); +#239591 = PLANE('',#239592); +#239592 = AXIS2_PLACEMENT_3D('',#239593,#239594,#239595); +#239593 = CARTESIAN_POINT('',(136.5695,-89.528078,1.51)); +#239594 = DIRECTION('',(0.707740789717,0.706472203679,-0.)); +#239595 = DIRECTION('',(0.706472203679,-0.707740789717,0.)); +#239596 = ADVANCED_FACE('',(#239597),#239622,.T.); +#239597 = FACE_BOUND('',#239598,.T.); +#239598 = EDGE_LOOP('',(#239599,#239600,#239608,#239616)); +#239599 = ORIENTED_EDGE('',*,*,#239578,.T.); +#239600 = ORIENTED_EDGE('',*,*,#239601,.T.); +#239601 = EDGE_CURVE('',#239571,#239602,#239604,.T.); +#239602 = VERTEX_POINT('',#239603); +#239603 = CARTESIAN_POINT('',(138.098079,-91.080491,1.545)); +#239604 = LINE('',#239605,#239606); +#239605 = CARTESIAN_POINT('',(138.083147,-91.044443,1.545)); +#239606 = VECTOR('',#239607,1.); +#239607 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#239608 = ORIENTED_EDGE('',*,*,#239609,.F.); +#239609 = EDGE_CURVE('',#239610,#239602,#239612,.T.); +#239610 = VERTEX_POINT('',#239611); +#239611 = CARTESIAN_POINT('',(138.098079,-91.080491,1.51)); +#239612 = LINE('',#239613,#239614); +#239613 = CARTESIAN_POINT('',(138.098079,-91.080491,1.51)); +#239614 = VECTOR('',#239615,1.); +#239615 = DIRECTION('',(0.,0.,1.)); +#239616 = ORIENTED_EDGE('',*,*,#239617,.F.); +#239617 = EDGE_CURVE('',#239579,#239610,#239618,.T.); +#239618 = LINE('',#239619,#239620); +#239619 = CARTESIAN_POINT('',(138.083147,-91.044443,1.51)); +#239620 = VECTOR('',#239621,1.); +#239621 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#239622 = PLANE('',#239623); +#239623 = AXIS2_PLACEMENT_3D('',#239624,#239625,#239626); +#239624 = CARTESIAN_POINT('',(138.083147,-91.044443,1.51)); +#239625 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#239626 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#239627 = ADVANCED_FACE('',(#239628),#239653,.T.); +#239628 = FACE_BOUND('',#239629,.T.); +#239629 = EDGE_LOOP('',(#239630,#239631,#239639,#239647)); +#239630 = ORIENTED_EDGE('',*,*,#239609,.T.); +#239631 = ORIENTED_EDGE('',*,*,#239632,.T.); +#239632 = EDGE_CURVE('',#239602,#239633,#239635,.T.); +#239633 = VERTEX_POINT('',#239634); +#239634 = CARTESIAN_POINT('',(138.098079,-121.115523,1.545)); +#239635 = LINE('',#239636,#239637); +#239636 = CARTESIAN_POINT('',(138.098079,-91.080491,1.545)); +#239637 = VECTOR('',#239638,1.); +#239638 = DIRECTION('',(0.,-1.,0.)); +#239639 = ORIENTED_EDGE('',*,*,#239640,.F.); +#239640 = EDGE_CURVE('',#239641,#239633,#239643,.T.); +#239641 = VERTEX_POINT('',#239642); +#239642 = CARTESIAN_POINT('',(138.098079,-121.115523,1.51)); +#239643 = LINE('',#239644,#239645); +#239644 = CARTESIAN_POINT('',(138.098079,-121.115523,1.51)); +#239645 = VECTOR('',#239646,1.); +#239646 = DIRECTION('',(0.,0.,1.)); +#239647 = ORIENTED_EDGE('',*,*,#239648,.F.); +#239648 = EDGE_CURVE('',#239610,#239641,#239649,.T.); +#239649 = LINE('',#239650,#239651); +#239650 = CARTESIAN_POINT('',(138.098079,-91.080491,1.51)); +#239651 = VECTOR('',#239652,1.); +#239652 = DIRECTION('',(0.,-1.,0.)); +#239653 = PLANE('',#239654); +#239654 = AXIS2_PLACEMENT_3D('',#239655,#239656,#239657); +#239655 = CARTESIAN_POINT('',(138.098079,-91.080491,1.51)); +#239656 = DIRECTION('',(1.,0.,-0.)); +#239657 = DIRECTION('',(0.,-1.,0.)); +#239658 = ADVANCED_FACE('',(#239659),#239684,.T.); +#239659 = FACE_BOUND('',#239660,.T.); +#239660 = EDGE_LOOP('',(#239661,#239662,#239670,#239678)); +#239661 = ORIENTED_EDGE('',*,*,#239640,.T.); +#239662 = ORIENTED_EDGE('',*,*,#239663,.T.); +#239663 = EDGE_CURVE('',#239633,#239664,#239666,.T.); +#239664 = VERTEX_POINT('',#239665); +#239665 = CARTESIAN_POINT('',(138.083147,-121.151571,1.545)); +#239666 = LINE('',#239667,#239668); +#239667 = CARTESIAN_POINT('',(138.098079,-121.115523,1.545)); +#239668 = VECTOR('',#239669,1.); +#239669 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#239670 = ORIENTED_EDGE('',*,*,#239671,.F.); +#239671 = EDGE_CURVE('',#239672,#239664,#239674,.T.); +#239672 = VERTEX_POINT('',#239673); +#239673 = CARTESIAN_POINT('',(138.083147,-121.151571,1.51)); +#239674 = LINE('',#239675,#239676); +#239675 = CARTESIAN_POINT('',(138.083147,-121.151571,1.51)); +#239676 = VECTOR('',#239677,1.); +#239677 = DIRECTION('',(0.,0.,1.)); +#239678 = ORIENTED_EDGE('',*,*,#239679,.F.); +#239679 = EDGE_CURVE('',#239641,#239672,#239680,.T.); +#239680 = LINE('',#239681,#239682); +#239681 = CARTESIAN_POINT('',(138.098079,-121.115523,1.51)); +#239682 = VECTOR('',#239683,1.); +#239683 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#239684 = PLANE('',#239685); +#239685 = AXIS2_PLACEMENT_3D('',#239686,#239687,#239688); +#239686 = CARTESIAN_POINT('',(138.098079,-121.115523,1.51)); +#239687 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#239688 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#239689 = ADVANCED_FACE('',(#239690),#239715,.T.); +#239690 = FACE_BOUND('',#239691,.T.); +#239691 = EDGE_LOOP('',(#239692,#239693,#239701,#239709)); +#239692 = ORIENTED_EDGE('',*,*,#239671,.T.); +#239693 = ORIENTED_EDGE('',*,*,#239694,.T.); +#239694 = EDGE_CURVE('',#239664,#239695,#239697,.T.); +#239695 = VERTEX_POINT('',#239696); +#239696 = CARTESIAN_POINT('',(137.269499,-121.967936,1.545)); +#239697 = LINE('',#239698,#239699); +#239698 = CARTESIAN_POINT('',(138.083147,-121.151571,1.545)); +#239699 = VECTOR('',#239700,1.); +#239700 = DIRECTION('',(-0.705927154004,-0.708284443737,0.)); +#239701 = ORIENTED_EDGE('',*,*,#239702,.F.); +#239702 = EDGE_CURVE('',#239703,#239695,#239705,.T.); +#239703 = VERTEX_POINT('',#239704); +#239704 = CARTESIAN_POINT('',(137.269499,-121.967936,1.51)); +#239705 = LINE('',#239706,#239707); +#239706 = CARTESIAN_POINT('',(137.269499,-121.967936,1.51)); +#239707 = VECTOR('',#239708,1.); +#239708 = DIRECTION('',(0.,0.,1.)); +#239709 = ORIENTED_EDGE('',*,*,#239710,.F.); +#239710 = EDGE_CURVE('',#239672,#239703,#239711,.T.); +#239711 = LINE('',#239712,#239713); +#239712 = CARTESIAN_POINT('',(138.083147,-121.151571,1.51)); +#239713 = VECTOR('',#239714,1.); +#239714 = DIRECTION('',(-0.705927154004,-0.708284443737,0.)); +#239715 = PLANE('',#239716); +#239716 = AXIS2_PLACEMENT_3D('',#239717,#239718,#239719); +#239717 = CARTESIAN_POINT('',(138.083147,-121.151571,1.51)); +#239718 = DIRECTION('',(0.708284443737,-0.705927154004,0.)); +#239719 = DIRECTION('',(-0.705927154004,-0.708284443737,0.)); +#239720 = ADVANCED_FACE('',(#239721),#239746,.T.); +#239721 = FACE_BOUND('',#239722,.T.); +#239722 = EDGE_LOOP('',(#239723,#239724,#239732,#239740)); +#239723 = ORIENTED_EDGE('',*,*,#239702,.T.); +#239724 = ORIENTED_EDGE('',*,*,#239725,.T.); +#239725 = EDGE_CURVE('',#239695,#239726,#239728,.T.); +#239726 = VERTEX_POINT('',#239727); +#239727 = CARTESIAN_POINT('',(137.277163,-121.98121,1.545)); +#239728 = LINE('',#239729,#239730); +#239729 = CARTESIAN_POINT('',(137.269499,-121.967936,1.545)); +#239730 = VECTOR('',#239731,1.); +#239731 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#239732 = ORIENTED_EDGE('',*,*,#239733,.F.); +#239733 = EDGE_CURVE('',#239734,#239726,#239736,.T.); +#239734 = VERTEX_POINT('',#239735); +#239735 = CARTESIAN_POINT('',(137.277163,-121.98121,1.51)); +#239736 = LINE('',#239737,#239738); +#239737 = CARTESIAN_POINT('',(137.277163,-121.98121,1.51)); +#239738 = VECTOR('',#239739,1.); +#239739 = DIRECTION('',(0.,0.,1.)); +#239740 = ORIENTED_EDGE('',*,*,#239741,.F.); +#239741 = EDGE_CURVE('',#239703,#239734,#239742,.T.); +#239742 = LINE('',#239743,#239744); +#239743 = CARTESIAN_POINT('',(137.269499,-121.967936,1.51)); +#239744 = VECTOR('',#239745,1.); +#239745 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#239746 = PLANE('',#239747); +#239747 = AXIS2_PLACEMENT_3D('',#239748,#239749,#239750); +#239748 = CARTESIAN_POINT('',(137.269499,-121.967936,1.51)); +#239749 = DIRECTION('',(0.866018269693,0.500012356405,-0.)); +#239750 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#239751 = ADVANCED_FACE('',(#239752),#239779,.T.); +#239752 = FACE_BOUND('',#239753,.T.); +#239753 = EDGE_LOOP('',(#239754,#239755,#239764,#239772)); +#239754 = ORIENTED_EDGE('',*,*,#239733,.T.); +#239755 = ORIENTED_EDGE('',*,*,#239756,.T.); +#239756 = EDGE_CURVE('',#239726,#239757,#239759,.T.); +#239757 = VERTEX_POINT('',#239758); +#239758 = CARTESIAN_POINT('',(137.114804,-121.818851,1.545)); +#239759 = CIRCLE('',#239760,0.299999934501); +#239760 = AXIS2_PLACEMENT_3D('',#239761,#239762,#239763); +#239761 = CARTESIAN_POINT('',(136.99999914059,-122.0960148594,1.545)); +#239762 = DIRECTION('',(0.,0.,-1.)); +#239763 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#239764 = ORIENTED_EDGE('',*,*,#239765,.F.); +#239765 = EDGE_CURVE('',#239766,#239757,#239768,.T.); +#239766 = VERTEX_POINT('',#239767); +#239767 = CARTESIAN_POINT('',(137.114804,-121.818851,1.51)); +#239768 = LINE('',#239769,#239770); +#239769 = CARTESIAN_POINT('',(137.114804,-121.818851,1.51)); +#239770 = VECTOR('',#239771,1.); +#239771 = DIRECTION('',(0.,0.,1.)); +#239772 = ORIENTED_EDGE('',*,*,#239773,.F.); +#239773 = EDGE_CURVE('',#239734,#239766,#239774,.T.); +#239774 = CIRCLE('',#239775,0.299999934501); +#239775 = AXIS2_PLACEMENT_3D('',#239776,#239777,#239778); +#239776 = CARTESIAN_POINT('',(136.99999914059,-122.0960148594,1.51)); +#239777 = DIRECTION('',(0.,0.,-1.)); +#239778 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#239779 = CYLINDRICAL_SURFACE('',#239780,0.299999934501); +#239780 = AXIS2_PLACEMENT_3D('',#239781,#239782,#239783); +#239781 = CARTESIAN_POINT('',(136.99999914059,-122.0960148594,1.51)); +#239782 = DIRECTION('',(0.,0.,-1.)); +#239783 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#239784 = ADVANCED_FACE('',(#239785),#239810,.T.); +#239785 = FACE_BOUND('',#239786,.T.); +#239786 = EDGE_LOOP('',(#239787,#239788,#239796,#239804)); +#239787 = ORIENTED_EDGE('',*,*,#239765,.T.); +#239788 = ORIENTED_EDGE('',*,*,#239789,.T.); +#239789 = EDGE_CURVE('',#239757,#239790,#239792,.T.); +#239790 = VERTEX_POINT('',#239791); +#239791 = CARTESIAN_POINT('',(137.128077,-121.826514,1.545)); +#239792 = LINE('',#239793,#239794); +#239793 = CARTESIAN_POINT('',(137.114804,-121.818851,1.545)); +#239794 = VECTOR('',#239795,1.); +#239795 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#239796 = ORIENTED_EDGE('',*,*,#239797,.F.); +#239797 = EDGE_CURVE('',#239798,#239790,#239800,.T.); +#239798 = VERTEX_POINT('',#239799); +#239799 = CARTESIAN_POINT('',(137.128077,-121.826514,1.51)); +#239800 = LINE('',#239801,#239802); +#239801 = CARTESIAN_POINT('',(137.128077,-121.826514,1.51)); +#239802 = VECTOR('',#239803,1.); +#239803 = DIRECTION('',(0.,0.,1.)); +#239804 = ORIENTED_EDGE('',*,*,#239805,.F.); +#239805 = EDGE_CURVE('',#239766,#239798,#239806,.T.); +#239806 = LINE('',#239807,#239808); +#239807 = CARTESIAN_POINT('',(137.114804,-121.818851,1.51)); +#239808 = VECTOR('',#239809,1.); +#239809 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#239810 = PLANE('',#239811); +#239811 = AXIS2_PLACEMENT_3D('',#239812,#239813,#239814); +#239812 = CARTESIAN_POINT('',(137.114804,-121.818851,1.51)); +#239813 = DIRECTION('',(0.499991674903,0.866030210228,-0.)); +#239814 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#239815 = ADVANCED_FACE('',(#239816),#239841,.T.); +#239816 = FACE_BOUND('',#239817,.T.); +#239817 = EDGE_LOOP('',(#239818,#239819,#239827,#239835)); +#239818 = ORIENTED_EDGE('',*,*,#239797,.T.); +#239819 = ORIENTED_EDGE('',*,*,#239820,.T.); +#239820 = EDGE_CURVE('',#239790,#239821,#239823,.T.); +#239821 = VERTEX_POINT('',#239822); +#239822 = CARTESIAN_POINT('',(137.9,-121.054592,1.545)); +#239823 = LINE('',#239824,#239825); +#239824 = CARTESIAN_POINT('',(137.128077,-121.826514,1.545)); +#239825 = VECTOR('',#239826,1.); +#239826 = DIRECTION('',(0.707107239203,0.70710632317,0.)); +#239827 = ORIENTED_EDGE('',*,*,#239828,.F.); +#239828 = EDGE_CURVE('',#239829,#239821,#239831,.T.); +#239829 = VERTEX_POINT('',#239830); +#239830 = CARTESIAN_POINT('',(137.9,-121.054592,1.51)); +#239831 = LINE('',#239832,#239833); +#239832 = CARTESIAN_POINT('',(137.9,-121.054592,1.51)); +#239833 = VECTOR('',#239834,1.); +#239834 = DIRECTION('',(0.,0.,1.)); +#239835 = ORIENTED_EDGE('',*,*,#239836,.F.); +#239836 = EDGE_CURVE('',#239798,#239829,#239837,.T.); +#239837 = LINE('',#239838,#239839); +#239838 = CARTESIAN_POINT('',(137.128077,-121.826514,1.51)); +#239839 = VECTOR('',#239840,1.); +#239840 = DIRECTION('',(0.707107239203,0.70710632317,0.)); +#239841 = PLANE('',#239842); +#239842 = AXIS2_PLACEMENT_3D('',#239843,#239844,#239845); +#239843 = CARTESIAN_POINT('',(137.128077,-121.826514,1.51)); +#239844 = DIRECTION('',(-0.70710632317,0.707107239203,0.)); +#239845 = DIRECTION('',(0.707107239203,0.70710632317,0.)); +#239846 = ADVANCED_FACE('',(#239847),#239872,.T.); +#239847 = FACE_BOUND('',#239848,.T.); +#239848 = EDGE_LOOP('',(#239849,#239850,#239858,#239866)); +#239849 = ORIENTED_EDGE('',*,*,#239828,.T.); +#239850 = ORIENTED_EDGE('',*,*,#239851,.T.); +#239851 = EDGE_CURVE('',#239821,#239852,#239854,.T.); +#239852 = VERTEX_POINT('',#239853); +#239853 = CARTESIAN_POINT('',(137.9,-91.141422,1.545)); +#239854 = LINE('',#239855,#239856); +#239855 = CARTESIAN_POINT('',(137.9,-121.054592,1.545)); +#239856 = VECTOR('',#239857,1.); +#239857 = DIRECTION('',(0.,1.,0.)); +#239858 = ORIENTED_EDGE('',*,*,#239859,.F.); +#239859 = EDGE_CURVE('',#239860,#239852,#239862,.T.); +#239860 = VERTEX_POINT('',#239861); +#239861 = CARTESIAN_POINT('',(137.9,-91.141422,1.51)); +#239862 = LINE('',#239863,#239864); +#239863 = CARTESIAN_POINT('',(137.9,-91.141422,1.51)); +#239864 = VECTOR('',#239865,1.); +#239865 = DIRECTION('',(0.,0.,1.)); +#239866 = ORIENTED_EDGE('',*,*,#239867,.F.); +#239867 = EDGE_CURVE('',#239829,#239860,#239868,.T.); +#239868 = LINE('',#239869,#239870); +#239869 = CARTESIAN_POINT('',(137.9,-121.054592,1.51)); +#239870 = VECTOR('',#239871,1.); +#239871 = DIRECTION('',(0.,1.,0.)); +#239872 = PLANE('',#239873); +#239873 = AXIS2_PLACEMENT_3D('',#239874,#239875,#239876); +#239874 = CARTESIAN_POINT('',(137.9,-121.054592,1.51)); +#239875 = DIRECTION('',(-1.,0.,0.)); +#239876 = DIRECTION('',(0.,1.,0.)); +#239877 = ADVANCED_FACE('',(#239878),#239903,.T.); +#239878 = FACE_BOUND('',#239879,.T.); +#239879 = EDGE_LOOP('',(#239880,#239881,#239889,#239897)); +#239880 = ORIENTED_EDGE('',*,*,#239859,.T.); +#239881 = ORIENTED_EDGE('',*,*,#239882,.T.); +#239882 = EDGE_CURVE('',#239852,#239883,#239885,.T.); +#239883 = VERTEX_POINT('',#239884); +#239884 = CARTESIAN_POINT('',(136.428078,-89.6695,1.545)); +#239885 = LINE('',#239886,#239887); +#239886 = CARTESIAN_POINT('',(137.9,-91.141422,1.545)); +#239887 = VECTOR('',#239888,1.); +#239888 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239889 = ORIENTED_EDGE('',*,*,#239890,.F.); +#239890 = EDGE_CURVE('',#239891,#239883,#239893,.T.); +#239891 = VERTEX_POINT('',#239892); +#239892 = CARTESIAN_POINT('',(136.428078,-89.6695,1.51)); +#239893 = LINE('',#239894,#239895); +#239894 = CARTESIAN_POINT('',(136.428078,-89.6695,1.51)); +#239895 = VECTOR('',#239896,1.); +#239896 = DIRECTION('',(0.,0.,1.)); +#239897 = ORIENTED_EDGE('',*,*,#239898,.F.); +#239898 = EDGE_CURVE('',#239860,#239891,#239899,.T.); +#239899 = LINE('',#239900,#239901); +#239900 = CARTESIAN_POINT('',(137.9,-91.141422,1.51)); +#239901 = VECTOR('',#239902,1.); +#239902 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239903 = PLANE('',#239904); +#239904 = AXIS2_PLACEMENT_3D('',#239905,#239906,#239907); +#239905 = CARTESIAN_POINT('',(137.9,-91.141422,1.51)); +#239906 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#239907 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#239908 = ADVANCED_FACE('',(#239909),#239934,.T.); +#239909 = FACE_BOUND('',#239910,.T.); +#239910 = EDGE_LOOP('',(#239911,#239912,#239920,#239928)); +#239911 = ORIENTED_EDGE('',*,*,#239890,.T.); +#239912 = ORIENTED_EDGE('',*,*,#239913,.T.); +#239913 = EDGE_CURVE('',#239883,#239914,#239916,.T.); +#239914 = VERTEX_POINT('',#239915); +#239915 = CARTESIAN_POINT('',(136.414805,-89.677164,1.545)); +#239916 = LINE('',#239917,#239918); +#239917 = CARTESIAN_POINT('',(136.428078,-89.6695,1.545)); +#239918 = VECTOR('',#239919,1.); +#239919 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#239920 = ORIENTED_EDGE('',*,*,#239921,.F.); +#239921 = EDGE_CURVE('',#239922,#239914,#239924,.T.); +#239922 = VERTEX_POINT('',#239923); +#239923 = CARTESIAN_POINT('',(136.414805,-89.677164,1.51)); +#239924 = LINE('',#239925,#239926); +#239925 = CARTESIAN_POINT('',(136.414805,-89.677164,1.51)); +#239926 = VECTOR('',#239927,1.); +#239927 = DIRECTION('',(0.,0.,1.)); +#239928 = ORIENTED_EDGE('',*,*,#239929,.F.); +#239929 = EDGE_CURVE('',#239891,#239922,#239930,.T.); +#239930 = LINE('',#239931,#239932); +#239931 = CARTESIAN_POINT('',(136.428078,-89.6695,1.51)); +#239932 = VECTOR('',#239933,1.); +#239933 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#239934 = PLANE('',#239935); +#239935 = AXIS2_PLACEMENT_3D('',#239936,#239937,#239938); +#239936 = CARTESIAN_POINT('',(136.428078,-89.6695,1.51)); +#239937 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#239938 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#239939 = ADVANCED_FACE('',(#239940),#239967,.T.); +#239940 = FACE_BOUND('',#239941,.T.); +#239941 = EDGE_LOOP('',(#239942,#239943,#239952,#239960)); +#239942 = ORIENTED_EDGE('',*,*,#239921,.T.); +#239943 = ORIENTED_EDGE('',*,*,#239944,.T.); +#239944 = EDGE_CURVE('',#239914,#239945,#239947,.T.); +#239945 = VERTEX_POINT('',#239946); +#239946 = CARTESIAN_POINT('',(136.577164,-89.514805,1.545)); +#239947 = CIRCLE('',#239948,0.300000118202); +#239948 = AXIS2_PLACEMENT_3D('',#239949,#239950,#239951); +#239949 = CARTESIAN_POINT('',(136.3,-89.4,1.545)); +#239950 = DIRECTION('',(0.,0.,-1.)); +#239951 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#239952 = ORIENTED_EDGE('',*,*,#239953,.F.); +#239953 = EDGE_CURVE('',#239954,#239945,#239956,.T.); +#239954 = VERTEX_POINT('',#239955); +#239955 = CARTESIAN_POINT('',(136.577164,-89.514805,1.51)); +#239956 = LINE('',#239957,#239958); +#239957 = CARTESIAN_POINT('',(136.577164,-89.514805,1.51)); +#239958 = VECTOR('',#239959,1.); +#239959 = DIRECTION('',(0.,0.,1.)); +#239960 = ORIENTED_EDGE('',*,*,#239961,.F.); +#239961 = EDGE_CURVE('',#239922,#239954,#239962,.T.); +#239962 = CIRCLE('',#239963,0.300000118202); +#239963 = AXIS2_PLACEMENT_3D('',#239964,#239965,#239966); +#239964 = CARTESIAN_POINT('',(136.3,-89.4,1.51)); +#239965 = DIRECTION('',(0.,0.,-1.)); +#239966 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#239967 = CYLINDRICAL_SURFACE('',#239968,0.300000118202); +#239968 = AXIS2_PLACEMENT_3D('',#239969,#239970,#239971); +#239969 = CARTESIAN_POINT('',(136.3,-89.4,1.51)); +#239970 = DIRECTION('',(0.,0.,-1.)); +#239971 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#239972 = ADVANCED_FACE('',(#239973),#239989,.T.); +#239973 = FACE_BOUND('',#239974,.T.); +#239974 = EDGE_LOOP('',(#239975,#239976,#239982,#239983)); +#239975 = ORIENTED_EDGE('',*,*,#239953,.T.); +#239976 = ORIENTED_EDGE('',*,*,#239977,.T.); +#239977 = EDGE_CURVE('',#239945,#239563,#239978,.T.); +#239978 = LINE('',#239979,#239980); +#239979 = CARTESIAN_POINT('',(136.577164,-89.514805,1.545)); +#239980 = VECTOR('',#239981,1.); +#239981 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#239982 = ORIENTED_EDGE('',*,*,#239560,.F.); +#239983 = ORIENTED_EDGE('',*,*,#239984,.F.); +#239984 = EDGE_CURVE('',#239954,#239561,#239985,.T.); +#239985 = LINE('',#239986,#239987); +#239986 = CARTESIAN_POINT('',(136.577164,-89.514805,1.51)); +#239987 = VECTOR('',#239988,1.); +#239988 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#239989 = PLANE('',#239990); +#239990 = AXIS2_PLACEMENT_3D('',#239991,#239992,#239993); +#239991 = CARTESIAN_POINT('',(136.577164,-89.514805,1.51)); +#239992 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#239993 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#239994 = ADVANCED_FACE('',(#239995),#240022,.F.); +#239995 = FACE_BOUND('',#239996,.T.); +#239996 = EDGE_LOOP('',(#239997,#240007,#240014,#240015)); +#239997 = ORIENTED_EDGE('',*,*,#239998,.T.); +#239998 = EDGE_CURVE('',#239999,#240001,#240003,.T.); +#239999 = VERTEX_POINT('',#240000); +#240000 = CARTESIAN_POINT('',(137.137254,-122.096015,1.51)); +#240001 = VERTEX_POINT('',#240002); +#240002 = CARTESIAN_POINT('',(137.137254,-122.096015,1.545)); +#240003 = LINE('',#240004,#240005); +#240004 = CARTESIAN_POINT('',(137.137254,-122.096015,1.51)); +#240005 = VECTOR('',#240006,1.); +#240006 = DIRECTION('',(0.,0.,1.)); +#240007 = ORIENTED_EDGE('',*,*,#240008,.T.); +#240008 = EDGE_CURVE('',#240001,#240001,#240009,.T.); +#240009 = CIRCLE('',#240010,0.137255); +#240010 = AXIS2_PLACEMENT_3D('',#240011,#240012,#240013); +#240011 = CARTESIAN_POINT('',(136.999999,-122.096015,1.545)); +#240012 = DIRECTION('',(0.,0.,1.)); +#240013 = DIRECTION('',(1.,0.,-0.)); +#240014 = ORIENTED_EDGE('',*,*,#239998,.F.); +#240015 = ORIENTED_EDGE('',*,*,#240016,.F.); +#240016 = EDGE_CURVE('',#239999,#239999,#240017,.T.); +#240017 = CIRCLE('',#240018,0.137255); +#240018 = AXIS2_PLACEMENT_3D('',#240019,#240020,#240021); +#240019 = CARTESIAN_POINT('',(136.999999,-122.096015,1.51)); +#240020 = DIRECTION('',(0.,0.,1.)); +#240021 = DIRECTION('',(1.,0.,-0.)); +#240022 = CYLINDRICAL_SURFACE('',#240023,0.137255); +#240023 = AXIS2_PLACEMENT_3D('',#240024,#240025,#240026); +#240024 = CARTESIAN_POINT('',(136.999999,-122.096015,1.51)); +#240025 = DIRECTION('',(-0.,-0.,-1.)); +#240026 = DIRECTION('',(1.,0.,-0.)); +#240027 = ADVANCED_FACE('',(#240028),#240055,.F.); +#240028 = FACE_BOUND('',#240029,.T.); +#240029 = EDGE_LOOP('',(#240030,#240040,#240047,#240048)); +#240030 = ORIENTED_EDGE('',*,*,#240031,.T.); +#240031 = EDGE_CURVE('',#240032,#240034,#240036,.T.); +#240032 = VERTEX_POINT('',#240033); +#240033 = CARTESIAN_POINT('',(136.437255,-89.4,1.51)); +#240034 = VERTEX_POINT('',#240035); +#240035 = CARTESIAN_POINT('',(136.437255,-89.4,1.545)); +#240036 = LINE('',#240037,#240038); +#240037 = CARTESIAN_POINT('',(136.437255,-89.4,1.51)); +#240038 = VECTOR('',#240039,1.); +#240039 = DIRECTION('',(0.,0.,1.)); +#240040 = ORIENTED_EDGE('',*,*,#240041,.T.); +#240041 = EDGE_CURVE('',#240034,#240034,#240042,.T.); +#240042 = CIRCLE('',#240043,0.137255); +#240043 = AXIS2_PLACEMENT_3D('',#240044,#240045,#240046); +#240044 = CARTESIAN_POINT('',(136.3,-89.4,1.545)); +#240045 = DIRECTION('',(0.,0.,1.)); +#240046 = DIRECTION('',(1.,0.,-0.)); +#240047 = ORIENTED_EDGE('',*,*,#240031,.F.); +#240048 = ORIENTED_EDGE('',*,*,#240049,.F.); +#240049 = EDGE_CURVE('',#240032,#240032,#240050,.T.); +#240050 = CIRCLE('',#240051,0.137255); +#240051 = AXIS2_PLACEMENT_3D('',#240052,#240053,#240054); +#240052 = CARTESIAN_POINT('',(136.3,-89.4,1.51)); +#240053 = DIRECTION('',(0.,0.,1.)); +#240054 = DIRECTION('',(1.,0.,-0.)); +#240055 = CYLINDRICAL_SURFACE('',#240056,0.137255); +#240056 = AXIS2_PLACEMENT_3D('',#240057,#240058,#240059); +#240057 = CARTESIAN_POINT('',(136.3,-89.4,1.51)); +#240058 = DIRECTION('',(-0.,-0.,-1.)); +#240059 = DIRECTION('',(1.,0.,-0.)); +#240060 = ADVANCED_FACE('',(#240061,#240077,#240080),#240083,.F.); +#240061 = FACE_BOUND('',#240062,.T.); +#240062 = EDGE_LOOP('',(#240063,#240064,#240065,#240066,#240067,#240068, + #240069,#240070,#240071,#240072,#240073,#240074,#240075,#240076)); +#240063 = ORIENTED_EDGE('',*,*,#239586,.T.); +#240064 = ORIENTED_EDGE('',*,*,#239617,.T.); +#240065 = ORIENTED_EDGE('',*,*,#239648,.T.); +#240066 = ORIENTED_EDGE('',*,*,#239679,.T.); +#240067 = ORIENTED_EDGE('',*,*,#239710,.T.); +#240068 = ORIENTED_EDGE('',*,*,#239741,.T.); +#240069 = ORIENTED_EDGE('',*,*,#239773,.T.); +#240070 = ORIENTED_EDGE('',*,*,#239805,.T.); +#240071 = ORIENTED_EDGE('',*,*,#239836,.T.); +#240072 = ORIENTED_EDGE('',*,*,#239867,.T.); +#240073 = ORIENTED_EDGE('',*,*,#239898,.T.); +#240074 = ORIENTED_EDGE('',*,*,#239929,.T.); +#240075 = ORIENTED_EDGE('',*,*,#239961,.T.); +#240076 = ORIENTED_EDGE('',*,*,#239984,.T.); +#240077 = FACE_BOUND('',#240078,.T.); +#240078 = EDGE_LOOP('',(#240079)); +#240079 = ORIENTED_EDGE('',*,*,#240016,.T.); +#240080 = FACE_BOUND('',#240081,.T.); +#240081 = EDGE_LOOP('',(#240082)); +#240082 = ORIENTED_EDGE('',*,*,#240049,.T.); +#240083 = PLANE('',#240084); +#240084 = AXIS2_PLACEMENT_3D('',#240085,#240086,#240087); +#240085 = CARTESIAN_POINT('',(0.,0.,1.51)); +#240086 = DIRECTION('',(0.,0.,1.)); +#240087 = DIRECTION('',(1.,0.,-0.)); +#240088 = ADVANCED_FACE('',(#240089,#240105,#240108),#240111,.T.); +#240089 = FACE_BOUND('',#240090,.F.); +#240090 = EDGE_LOOP('',(#240091,#240092,#240093,#240094,#240095,#240096, + #240097,#240098,#240099,#240100,#240101,#240102,#240103,#240104)); +#240091 = ORIENTED_EDGE('',*,*,#239570,.T.); +#240092 = ORIENTED_EDGE('',*,*,#239601,.T.); +#240093 = ORIENTED_EDGE('',*,*,#239632,.T.); +#240094 = ORIENTED_EDGE('',*,*,#239663,.T.); +#240095 = ORIENTED_EDGE('',*,*,#239694,.T.); +#240096 = ORIENTED_EDGE('',*,*,#239725,.T.); +#240097 = ORIENTED_EDGE('',*,*,#239756,.T.); +#240098 = ORIENTED_EDGE('',*,*,#239789,.T.); +#240099 = ORIENTED_EDGE('',*,*,#239820,.T.); +#240100 = ORIENTED_EDGE('',*,*,#239851,.T.); +#240101 = ORIENTED_EDGE('',*,*,#239882,.T.); +#240102 = ORIENTED_EDGE('',*,*,#239913,.T.); +#240103 = ORIENTED_EDGE('',*,*,#239944,.T.); +#240104 = ORIENTED_EDGE('',*,*,#239977,.T.); +#240105 = FACE_BOUND('',#240106,.F.); +#240106 = EDGE_LOOP('',(#240107)); +#240107 = ORIENTED_EDGE('',*,*,#240008,.T.); +#240108 = FACE_BOUND('',#240109,.F.); +#240109 = EDGE_LOOP('',(#240110)); +#240110 = ORIENTED_EDGE('',*,*,#240041,.T.); +#240111 = PLANE('',#240112); +#240112 = AXIS2_PLACEMENT_3D('',#240113,#240114,#240115); +#240113 = CARTESIAN_POINT('',(0.,0.,1.545)); +#240114 = DIRECTION('',(0.,0.,1.)); +#240115 = DIRECTION('',(1.,0.,-0.)); +#240116 = MANIFOLD_SOLID_BREP('',#240117); +#240117 = CLOSED_SHELL('',(#240118,#240158,#240189,#240222,#240253, + #240284,#240315,#240346,#240377,#240408,#240439,#240470,#240501, + #240532,#240563,#240596,#240627,#240658,#240689,#240720,#240751, + #240782,#240813,#240844,#240875,#240906,#240937,#240959,#240992, + #241030)); +#240118 = ADVANCED_FACE('',(#240119),#240153,.T.); +#240119 = FACE_BOUND('',#240120,.T.); +#240120 = EDGE_LOOP('',(#240121,#240131,#240139,#240147)); +#240121 = ORIENTED_EDGE('',*,*,#240122,.T.); +#240122 = EDGE_CURVE('',#240123,#240125,#240127,.T.); +#240123 = VERTEX_POINT('',#240124); +#240124 = CARTESIAN_POINT('',(142.774443,-72.186853,1.51)); +#240125 = VERTEX_POINT('',#240126); +#240126 = CARTESIAN_POINT('',(142.774443,-72.186853,1.545)); +#240127 = LINE('',#240128,#240129); +#240128 = CARTESIAN_POINT('',(142.774443,-72.186853,1.51)); +#240129 = VECTOR('',#240130,1.); +#240130 = DIRECTION('',(0.,0.,1.)); +#240131 = ORIENTED_EDGE('',*,*,#240132,.T.); +#240132 = EDGE_CURVE('',#240125,#240133,#240135,.T.); +#240133 = VERTEX_POINT('',#240134); +#240134 = CARTESIAN_POINT('',(142.810491,-72.171921,1.545)); +#240135 = LINE('',#240136,#240137); +#240136 = CARTESIAN_POINT('',(142.774443,-72.186853,1.545)); +#240137 = VECTOR('',#240138,1.); +#240138 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#240139 = ORIENTED_EDGE('',*,*,#240140,.F.); +#240140 = EDGE_CURVE('',#240141,#240133,#240143,.T.); +#240141 = VERTEX_POINT('',#240142); +#240142 = CARTESIAN_POINT('',(142.810491,-72.171921,1.51)); +#240143 = LINE('',#240144,#240145); +#240144 = CARTESIAN_POINT('',(142.810491,-72.171921,1.51)); +#240145 = VECTOR('',#240146,1.); +#240146 = DIRECTION('',(0.,0.,1.)); +#240147 = ORIENTED_EDGE('',*,*,#240148,.F.); +#240148 = EDGE_CURVE('',#240123,#240141,#240149,.T.); +#240149 = LINE('',#240150,#240151); +#240150 = CARTESIAN_POINT('',(142.774443,-72.186853,1.51)); +#240151 = VECTOR('',#240152,1.); +#240152 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#240153 = PLANE('',#240154); +#240154 = AXIS2_PLACEMENT_3D('',#240155,#240156,#240157); +#240155 = CARTESIAN_POINT('',(142.774443,-72.186853,1.51)); +#240156 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240157 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#240158 = ADVANCED_FACE('',(#240159),#240184,.T.); +#240159 = FACE_BOUND('',#240160,.T.); +#240160 = EDGE_LOOP('',(#240161,#240162,#240170,#240178)); +#240161 = ORIENTED_EDGE('',*,*,#240140,.T.); +#240162 = ORIENTED_EDGE('',*,*,#240163,.T.); +#240163 = EDGE_CURVE('',#240133,#240164,#240166,.T.); +#240164 = VERTEX_POINT('',#240165); +#240165 = CARTESIAN_POINT('',(146.769509,-72.171921,1.545)); +#240166 = LINE('',#240167,#240168); +#240167 = CARTESIAN_POINT('',(142.810491,-72.171921,1.545)); +#240168 = VECTOR('',#240169,1.); +#240169 = DIRECTION('',(1.,0.,0.)); +#240170 = ORIENTED_EDGE('',*,*,#240171,.F.); +#240171 = EDGE_CURVE('',#240172,#240164,#240174,.T.); +#240172 = VERTEX_POINT('',#240173); +#240173 = CARTESIAN_POINT('',(146.769509,-72.171921,1.51)); +#240174 = LINE('',#240175,#240176); +#240175 = CARTESIAN_POINT('',(146.769509,-72.171921,1.51)); +#240176 = VECTOR('',#240177,1.); +#240177 = DIRECTION('',(0.,0.,1.)); +#240178 = ORIENTED_EDGE('',*,*,#240179,.F.); +#240179 = EDGE_CURVE('',#240141,#240172,#240180,.T.); +#240180 = LINE('',#240181,#240182); +#240181 = CARTESIAN_POINT('',(142.810491,-72.171921,1.51)); +#240182 = VECTOR('',#240183,1.); +#240183 = DIRECTION('',(1.,0.,0.)); +#240184 = PLANE('',#240185); +#240185 = AXIS2_PLACEMENT_3D('',#240186,#240187,#240188); +#240186 = CARTESIAN_POINT('',(142.810491,-72.171921,1.51)); +#240187 = DIRECTION('',(0.,1.,0.)); +#240188 = DIRECTION('',(1.,0.,0.)); +#240189 = ADVANCED_FACE('',(#240190),#240217,.T.); +#240190 = FACE_BOUND('',#240191,.T.); +#240191 = EDGE_LOOP('',(#240192,#240193,#240202,#240210)); +#240192 = ORIENTED_EDGE('',*,*,#240171,.T.); +#240193 = ORIENTED_EDGE('',*,*,#240194,.T.); +#240194 = EDGE_CURVE('',#240164,#240195,#240197,.T.); +#240195 = VERTEX_POINT('',#240196); +#240196 = CARTESIAN_POINT('',(146.769509,-72.368079,1.545)); +#240197 = CIRCLE('',#240198,0.100000456609); +#240198 = AXIS2_PLACEMENT_3D('',#240199,#240200,#240201); +#240199 = CARTESIAN_POINT('',(146.75,-72.27,1.545)); +#240200 = DIRECTION('',(0.,0.,-1.)); +#240201 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#240202 = ORIENTED_EDGE('',*,*,#240203,.F.); +#240203 = EDGE_CURVE('',#240204,#240195,#240206,.T.); +#240204 = VERTEX_POINT('',#240205); +#240205 = CARTESIAN_POINT('',(146.769509,-72.368079,1.51)); +#240206 = LINE('',#240207,#240208); +#240207 = CARTESIAN_POINT('',(146.769509,-72.368079,1.51)); +#240208 = VECTOR('',#240209,1.); +#240209 = DIRECTION('',(0.,0.,1.)); +#240210 = ORIENTED_EDGE('',*,*,#240211,.F.); +#240211 = EDGE_CURVE('',#240172,#240204,#240212,.T.); +#240212 = CIRCLE('',#240213,0.100000456609); +#240213 = AXIS2_PLACEMENT_3D('',#240214,#240215,#240216); +#240214 = CARTESIAN_POINT('',(146.75,-72.27,1.51)); +#240215 = DIRECTION('',(0.,0.,-1.)); +#240216 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#240217 = CYLINDRICAL_SURFACE('',#240218,0.100000456609); +#240218 = AXIS2_PLACEMENT_3D('',#240219,#240220,#240221); +#240219 = CARTESIAN_POINT('',(146.75,-72.27,1.51)); +#240220 = DIRECTION('',(0.,0.,-1.)); +#240221 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#240222 = ADVANCED_FACE('',(#240223),#240248,.T.); +#240223 = FACE_BOUND('',#240224,.T.); +#240224 = EDGE_LOOP('',(#240225,#240226,#240234,#240242)); +#240225 = ORIENTED_EDGE('',*,*,#240203,.T.); +#240226 = ORIENTED_EDGE('',*,*,#240227,.T.); +#240227 = EDGE_CURVE('',#240195,#240228,#240230,.T.); +#240228 = VERTEX_POINT('',#240229); +#240229 = CARTESIAN_POINT('',(142.871422,-72.37,1.545)); +#240230 = LINE('',#240231,#240232); +#240231 = CARTESIAN_POINT('',(146.769509,-72.368079,1.545)); +#240232 = VECTOR('',#240233,1.); +#240233 = DIRECTION('',(-0.999999878571,-4.928057703036E-04,0.)); +#240234 = ORIENTED_EDGE('',*,*,#240235,.F.); +#240235 = EDGE_CURVE('',#240236,#240228,#240238,.T.); +#240236 = VERTEX_POINT('',#240237); +#240237 = CARTESIAN_POINT('',(142.871422,-72.37,1.51)); +#240238 = LINE('',#240239,#240240); +#240239 = CARTESIAN_POINT('',(142.871422,-72.37,1.51)); +#240240 = VECTOR('',#240241,1.); +#240241 = DIRECTION('',(0.,0.,1.)); +#240242 = ORIENTED_EDGE('',*,*,#240243,.F.); +#240243 = EDGE_CURVE('',#240204,#240236,#240244,.T.); +#240244 = LINE('',#240245,#240246); +#240245 = CARTESIAN_POINT('',(146.769509,-72.368079,1.51)); +#240246 = VECTOR('',#240247,1.); +#240247 = DIRECTION('',(-0.999999878571,-4.928057703036E-04,0.)); +#240248 = PLANE('',#240249); +#240249 = AXIS2_PLACEMENT_3D('',#240250,#240251,#240252); +#240250 = CARTESIAN_POINT('',(146.769509,-72.368079,1.51)); +#240251 = DIRECTION('',(4.928057703036E-04,-0.999999878571,0.)); +#240252 = DIRECTION('',(-0.999999878571,-4.928057703036E-04,0.)); +#240253 = ADVANCED_FACE('',(#240254),#240279,.T.); +#240254 = FACE_BOUND('',#240255,.T.); +#240255 = EDGE_LOOP('',(#240256,#240257,#240265,#240273)); +#240256 = ORIENTED_EDGE('',*,*,#240235,.T.); +#240257 = ORIENTED_EDGE('',*,*,#240258,.T.); +#240258 = EDGE_CURVE('',#240228,#240259,#240261,.T.); +#240259 = VERTEX_POINT('',#240260); +#240260 = CARTESIAN_POINT('',(140.305557,-74.933147,1.545)); +#240261 = LINE('',#240262,#240263); +#240262 = CARTESIAN_POINT('',(142.871422,-72.37,1.545)); +#240263 = VECTOR('',#240264,1.); +#240264 = DIRECTION('',(-0.707481396556,-0.706731967246,0.)); +#240265 = ORIENTED_EDGE('',*,*,#240266,.F.); +#240266 = EDGE_CURVE('',#240267,#240259,#240269,.T.); +#240267 = VERTEX_POINT('',#240268); +#240268 = CARTESIAN_POINT('',(140.305557,-74.933147,1.51)); +#240269 = LINE('',#240270,#240271); +#240270 = CARTESIAN_POINT('',(140.305557,-74.933147,1.51)); +#240271 = VECTOR('',#240272,1.); +#240272 = DIRECTION('',(0.,0.,1.)); +#240273 = ORIENTED_EDGE('',*,*,#240274,.F.); +#240274 = EDGE_CURVE('',#240236,#240267,#240275,.T.); +#240275 = LINE('',#240276,#240277); +#240276 = CARTESIAN_POINT('',(142.871422,-72.37,1.51)); +#240277 = VECTOR('',#240278,1.); +#240278 = DIRECTION('',(-0.707481396556,-0.706731967246,0.)); +#240279 = PLANE('',#240280); +#240280 = AXIS2_PLACEMENT_3D('',#240281,#240282,#240283); +#240281 = CARTESIAN_POINT('',(142.871422,-72.37,1.51)); +#240282 = DIRECTION('',(0.706731967246,-0.707481396556,0.)); +#240283 = DIRECTION('',(-0.707481396556,-0.706731967246,0.)); +#240284 = ADVANCED_FACE('',(#240285),#240310,.T.); +#240285 = FACE_BOUND('',#240286,.T.); +#240286 = EDGE_LOOP('',(#240287,#240288,#240296,#240304)); +#240287 = ORIENTED_EDGE('',*,*,#240266,.T.); +#240288 = ORIENTED_EDGE('',*,*,#240289,.T.); +#240289 = EDGE_CURVE('',#240259,#240290,#240292,.T.); +#240290 = VERTEX_POINT('',#240291); +#240291 = CARTESIAN_POINT('',(140.269509,-74.948079,1.545)); +#240292 = LINE('',#240293,#240294); +#240293 = CARTESIAN_POINT('',(140.305557,-74.933147,1.545)); +#240294 = VECTOR('',#240295,1.); +#240295 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#240296 = ORIENTED_EDGE('',*,*,#240297,.F.); +#240297 = EDGE_CURVE('',#240298,#240290,#240300,.T.); +#240298 = VERTEX_POINT('',#240299); +#240299 = CARTESIAN_POINT('',(140.269509,-74.948079,1.51)); +#240300 = LINE('',#240301,#240302); +#240301 = CARTESIAN_POINT('',(140.269509,-74.948079,1.51)); +#240302 = VECTOR('',#240303,1.); +#240303 = DIRECTION('',(0.,0.,1.)); +#240304 = ORIENTED_EDGE('',*,*,#240305,.F.); +#240305 = EDGE_CURVE('',#240267,#240298,#240306,.T.); +#240306 = LINE('',#240307,#240308); +#240307 = CARTESIAN_POINT('',(140.305557,-74.933147,1.51)); +#240308 = VECTOR('',#240309,1.); +#240309 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#240310 = PLANE('',#240311); +#240311 = AXIS2_PLACEMENT_3D('',#240312,#240313,#240314); +#240312 = CARTESIAN_POINT('',(140.305557,-74.933147,1.51)); +#240313 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#240314 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#240315 = ADVANCED_FACE('',(#240316),#240341,.T.); +#240316 = FACE_BOUND('',#240317,.T.); +#240317 = EDGE_LOOP('',(#240318,#240319,#240327,#240335)); +#240318 = ORIENTED_EDGE('',*,*,#240297,.T.); +#240319 = ORIENTED_EDGE('',*,*,#240320,.T.); +#240320 = EDGE_CURVE('',#240290,#240321,#240323,.T.); +#240321 = VERTEX_POINT('',#240322); +#240322 = CARTESIAN_POINT('',(136.341421,-74.95,1.545)); +#240323 = LINE('',#240324,#240325); +#240324 = CARTESIAN_POINT('',(140.269509,-74.948079,1.545)); +#240325 = VECTOR('',#240326,1.); +#240326 = DIRECTION('',(-0.999999880419,-4.890419385413E-04,0.)); +#240327 = ORIENTED_EDGE('',*,*,#240328,.F.); +#240328 = EDGE_CURVE('',#240329,#240321,#240331,.T.); +#240329 = VERTEX_POINT('',#240330); +#240330 = CARTESIAN_POINT('',(136.341421,-74.95,1.51)); +#240331 = LINE('',#240332,#240333); +#240332 = CARTESIAN_POINT('',(136.341421,-74.95,1.51)); +#240333 = VECTOR('',#240334,1.); +#240334 = DIRECTION('',(0.,0.,1.)); +#240335 = ORIENTED_EDGE('',*,*,#240336,.F.); +#240336 = EDGE_CURVE('',#240298,#240329,#240337,.T.); +#240337 = LINE('',#240338,#240339); +#240338 = CARTESIAN_POINT('',(140.269509,-74.948079,1.51)); +#240339 = VECTOR('',#240340,1.); +#240340 = DIRECTION('',(-0.999999880419,-4.890419385413E-04,0.)); +#240341 = PLANE('',#240342); +#240342 = AXIS2_PLACEMENT_3D('',#240343,#240344,#240345); +#240343 = CARTESIAN_POINT('',(140.269509,-74.948079,1.51)); +#240344 = DIRECTION('',(4.890419385413E-04,-0.999999880419,0.)); +#240345 = DIRECTION('',(-0.999999880419,-4.890419385413E-04,0.)); +#240346 = ADVANCED_FACE('',(#240347),#240372,.T.); +#240347 = FACE_BOUND('',#240348,.T.); +#240348 = EDGE_LOOP('',(#240349,#240350,#240358,#240366)); +#240349 = ORIENTED_EDGE('',*,*,#240328,.T.); +#240350 = ORIENTED_EDGE('',*,*,#240351,.T.); +#240351 = EDGE_CURVE('',#240321,#240352,#240354,.T.); +#240352 = VERTEX_POINT('',#240353); +#240353 = CARTESIAN_POINT('',(135.1,-76.191421,1.545)); +#240354 = LINE('',#240355,#240356); +#240355 = CARTESIAN_POINT('',(136.341421,-74.95,1.545)); +#240356 = VECTOR('',#240357,1.); +#240357 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#240358 = ORIENTED_EDGE('',*,*,#240359,.F.); +#240359 = EDGE_CURVE('',#240360,#240352,#240362,.T.); +#240360 = VERTEX_POINT('',#240361); +#240361 = CARTESIAN_POINT('',(135.1,-76.191421,1.51)); +#240362 = LINE('',#240363,#240364); +#240363 = CARTESIAN_POINT('',(135.1,-76.191421,1.51)); +#240364 = VECTOR('',#240365,1.); +#240365 = DIRECTION('',(0.,0.,1.)); +#240366 = ORIENTED_EDGE('',*,*,#240367,.F.); +#240367 = EDGE_CURVE('',#240329,#240360,#240368,.T.); +#240368 = LINE('',#240369,#240370); +#240369 = CARTESIAN_POINT('',(136.341421,-74.95,1.51)); +#240370 = VECTOR('',#240371,1.); +#240371 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#240372 = PLANE('',#240373); +#240373 = AXIS2_PLACEMENT_3D('',#240374,#240375,#240376); +#240374 = CARTESIAN_POINT('',(136.341421,-74.95,1.51)); +#240375 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#240376 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#240377 = ADVANCED_FACE('',(#240378),#240403,.T.); +#240378 = FACE_BOUND('',#240379,.T.); +#240379 = EDGE_LOOP('',(#240380,#240381,#240389,#240397)); +#240380 = ORIENTED_EDGE('',*,*,#240359,.T.); +#240381 = ORIENTED_EDGE('',*,*,#240382,.T.); +#240382 = EDGE_CURVE('',#240352,#240383,#240385,.T.); +#240383 = VERTEX_POINT('',#240384); +#240384 = CARTESIAN_POINT('',(135.1,-78.339138,1.545)); +#240385 = LINE('',#240386,#240387); +#240386 = CARTESIAN_POINT('',(135.1,-76.191421,1.545)); +#240387 = VECTOR('',#240388,1.); +#240388 = DIRECTION('',(0.,-1.,0.)); +#240389 = ORIENTED_EDGE('',*,*,#240390,.F.); +#240390 = EDGE_CURVE('',#240391,#240383,#240393,.T.); +#240391 = VERTEX_POINT('',#240392); +#240392 = CARTESIAN_POINT('',(135.1,-78.339138,1.51)); +#240393 = LINE('',#240394,#240395); +#240394 = CARTESIAN_POINT('',(135.1,-78.339138,1.51)); +#240395 = VECTOR('',#240396,1.); +#240396 = DIRECTION('',(0.,0.,1.)); +#240397 = ORIENTED_EDGE('',*,*,#240398,.F.); +#240398 = EDGE_CURVE('',#240360,#240391,#240399,.T.); +#240399 = LINE('',#240400,#240401); +#240400 = CARTESIAN_POINT('',(135.1,-76.191421,1.51)); +#240401 = VECTOR('',#240402,1.); +#240402 = DIRECTION('',(0.,-1.,0.)); +#240403 = PLANE('',#240404); +#240404 = AXIS2_PLACEMENT_3D('',#240405,#240406,#240407); +#240405 = CARTESIAN_POINT('',(135.1,-76.191421,1.51)); +#240406 = DIRECTION('',(1.,0.,-0.)); +#240407 = DIRECTION('',(0.,-1.,0.)); +#240408 = ADVANCED_FACE('',(#240409),#240434,.T.); +#240409 = FACE_BOUND('',#240410,.T.); +#240410 = EDGE_LOOP('',(#240411,#240412,#240420,#240428)); +#240411 = ORIENTED_EDGE('',*,*,#240390,.T.); +#240412 = ORIENTED_EDGE('',*,*,#240413,.T.); +#240413 = EDGE_CURVE('',#240383,#240414,#240416,.T.); +#240414 = VERTEX_POINT('',#240415); +#240415 = CARTESIAN_POINT('',(135.683147,-78.925003,1.545)); +#240416 = LINE('',#240417,#240418); +#240417 = CARTESIAN_POINT('',(135.1,-78.339138,1.545)); +#240418 = VECTOR('',#240419,1.); +#240419 = DIRECTION('',(0.705460822639,-0.708748917263,0.)); +#240420 = ORIENTED_EDGE('',*,*,#240421,.F.); +#240421 = EDGE_CURVE('',#240422,#240414,#240424,.T.); +#240422 = VERTEX_POINT('',#240423); +#240423 = CARTESIAN_POINT('',(135.683147,-78.925003,1.51)); +#240424 = LINE('',#240425,#240426); +#240425 = CARTESIAN_POINT('',(135.683147,-78.925003,1.51)); +#240426 = VECTOR('',#240427,1.); +#240427 = DIRECTION('',(0.,0.,1.)); +#240428 = ORIENTED_EDGE('',*,*,#240429,.F.); +#240429 = EDGE_CURVE('',#240391,#240422,#240430,.T.); +#240430 = LINE('',#240431,#240432); +#240431 = CARTESIAN_POINT('',(135.1,-78.339138,1.51)); +#240432 = VECTOR('',#240433,1.); +#240433 = DIRECTION('',(0.705460822639,-0.708748917263,0.)); +#240434 = PLANE('',#240435); +#240435 = AXIS2_PLACEMENT_3D('',#240436,#240437,#240438); +#240436 = CARTESIAN_POINT('',(135.1,-78.339138,1.51)); +#240437 = DIRECTION('',(0.708748917263,0.705460822639,-0.)); +#240438 = DIRECTION('',(0.705460822639,-0.708748917263,0.)); +#240439 = ADVANCED_FACE('',(#240440),#240465,.T.); +#240440 = FACE_BOUND('',#240441,.T.); +#240441 = EDGE_LOOP('',(#240442,#240443,#240451,#240459)); +#240442 = ORIENTED_EDGE('',*,*,#240421,.T.); +#240443 = ORIENTED_EDGE('',*,*,#240444,.T.); +#240444 = EDGE_CURVE('',#240414,#240445,#240447,.T.); +#240445 = VERTEX_POINT('',#240446); +#240446 = CARTESIAN_POINT('',(135.698079,-78.961051,1.545)); +#240447 = LINE('',#240448,#240449); +#240448 = CARTESIAN_POINT('',(135.683147,-78.925003,1.545)); +#240449 = VECTOR('',#240450,1.); +#240450 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#240451 = ORIENTED_EDGE('',*,*,#240452,.F.); +#240452 = EDGE_CURVE('',#240453,#240445,#240455,.T.); +#240453 = VERTEX_POINT('',#240454); +#240454 = CARTESIAN_POINT('',(135.698079,-78.961051,1.51)); +#240455 = LINE('',#240456,#240457); +#240456 = CARTESIAN_POINT('',(135.698079,-78.961051,1.51)); +#240457 = VECTOR('',#240458,1.); +#240458 = DIRECTION('',(0.,0.,1.)); +#240459 = ORIENTED_EDGE('',*,*,#240460,.F.); +#240460 = EDGE_CURVE('',#240422,#240453,#240461,.T.); +#240461 = LINE('',#240462,#240463); +#240462 = CARTESIAN_POINT('',(135.683147,-78.925003,1.51)); +#240463 = VECTOR('',#240464,1.); +#240464 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#240465 = PLANE('',#240466); +#240466 = AXIS2_PLACEMENT_3D('',#240467,#240468,#240469); +#240467 = CARTESIAN_POINT('',(135.683147,-78.925003,1.51)); +#240468 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#240469 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#240470 = ADVANCED_FACE('',(#240471),#240496,.T.); +#240471 = FACE_BOUND('',#240472,.T.); +#240472 = EDGE_LOOP('',(#240473,#240474,#240482,#240490)); +#240473 = ORIENTED_EDGE('',*,*,#240452,.T.); +#240474 = ORIENTED_EDGE('',*,*,#240475,.T.); +#240475 = EDGE_CURVE('',#240445,#240476,#240478,.T.); +#240476 = VERTEX_POINT('',#240477); +#240477 = CARTESIAN_POINT('',(135.7,-79.258578,1.545)); +#240478 = LINE('',#240479,#240480); +#240479 = CARTESIAN_POINT('',(135.698079,-78.961051,1.545)); +#240480 = VECTOR('',#240481,1.); +#240481 = DIRECTION('',(6.456422310406E-03,-0.999979157088,0.)); +#240482 = ORIENTED_EDGE('',*,*,#240483,.F.); +#240483 = EDGE_CURVE('',#240484,#240476,#240486,.T.); +#240484 = VERTEX_POINT('',#240485); +#240485 = CARTESIAN_POINT('',(135.7,-79.258578,1.51)); +#240486 = LINE('',#240487,#240488); +#240487 = CARTESIAN_POINT('',(135.7,-79.258578,1.51)); +#240488 = VECTOR('',#240489,1.); +#240489 = DIRECTION('',(0.,0.,1.)); +#240490 = ORIENTED_EDGE('',*,*,#240491,.F.); +#240491 = EDGE_CURVE('',#240453,#240484,#240492,.T.); +#240492 = LINE('',#240493,#240494); +#240493 = CARTESIAN_POINT('',(135.698079,-78.961051,1.51)); +#240494 = VECTOR('',#240495,1.); +#240495 = DIRECTION('',(6.456422310406E-03,-0.999979157088,0.)); +#240496 = PLANE('',#240497); +#240497 = AXIS2_PLACEMENT_3D('',#240498,#240499,#240500); +#240498 = CARTESIAN_POINT('',(135.698079,-78.961051,1.51)); +#240499 = DIRECTION('',(0.999979157088,6.456422310406E-03,-0.)); +#240500 = DIRECTION('',(6.456422310406E-03,-0.999979157088,0.)); +#240501 = ADVANCED_FACE('',(#240502),#240527,.T.); +#240502 = FACE_BOUND('',#240503,.T.); +#240503 = EDGE_LOOP('',(#240504,#240505,#240513,#240521)); +#240504 = ORIENTED_EDGE('',*,*,#240483,.T.); +#240505 = ORIENTED_EDGE('',*,*,#240506,.T.); +#240506 = EDGE_CURVE('',#240476,#240507,#240509,.T.); +#240507 = VERTEX_POINT('',#240508); +#240508 = CARTESIAN_POINT('',(136.271921,-79.830499,1.545)); +#240509 = LINE('',#240510,#240511); +#240510 = CARTESIAN_POINT('',(135.7,-79.258578,1.545)); +#240511 = VECTOR('',#240512,1.); +#240512 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#240513 = ORIENTED_EDGE('',*,*,#240514,.F.); +#240514 = EDGE_CURVE('',#240515,#240507,#240517,.T.); +#240515 = VERTEX_POINT('',#240516); +#240516 = CARTESIAN_POINT('',(136.271921,-79.830499,1.51)); +#240517 = LINE('',#240518,#240519); +#240518 = CARTESIAN_POINT('',(136.271921,-79.830499,1.51)); +#240519 = VECTOR('',#240520,1.); +#240520 = DIRECTION('',(0.,0.,1.)); +#240521 = ORIENTED_EDGE('',*,*,#240522,.F.); +#240522 = EDGE_CURVE('',#240484,#240515,#240523,.T.); +#240523 = LINE('',#240524,#240525); +#240524 = CARTESIAN_POINT('',(135.7,-79.258578,1.51)); +#240525 = VECTOR('',#240526,1.); +#240526 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#240527 = PLANE('',#240528); +#240528 = AXIS2_PLACEMENT_3D('',#240529,#240530,#240531); +#240529 = CARTESIAN_POINT('',(135.7,-79.258578,1.51)); +#240530 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#240531 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#240532 = ADVANCED_FACE('',(#240533),#240558,.T.); +#240533 = FACE_BOUND('',#240534,.T.); +#240534 = EDGE_LOOP('',(#240535,#240536,#240544,#240552)); +#240535 = ORIENTED_EDGE('',*,*,#240514,.T.); +#240536 = ORIENTED_EDGE('',*,*,#240537,.T.); +#240537 = EDGE_CURVE('',#240507,#240538,#240540,.T.); +#240538 = VERTEX_POINT('',#240539); +#240539 = CARTESIAN_POINT('',(136.285195,-79.822836,1.545)); +#240540 = LINE('',#240541,#240542); +#240541 = CARTESIAN_POINT('',(136.271921,-79.830499,1.545)); +#240542 = VECTOR('',#240543,1.); +#240543 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#240544 = ORIENTED_EDGE('',*,*,#240545,.F.); +#240545 = EDGE_CURVE('',#240546,#240538,#240548,.T.); +#240546 = VERTEX_POINT('',#240547); +#240547 = CARTESIAN_POINT('',(136.285195,-79.822836,1.51)); +#240548 = LINE('',#240549,#240550); +#240549 = CARTESIAN_POINT('',(136.285195,-79.822836,1.51)); +#240550 = VECTOR('',#240551,1.); +#240551 = DIRECTION('',(0.,0.,1.)); +#240552 = ORIENTED_EDGE('',*,*,#240553,.F.); +#240553 = EDGE_CURVE('',#240515,#240546,#240554,.T.); +#240554 = LINE('',#240555,#240556); +#240555 = CARTESIAN_POINT('',(136.271921,-79.830499,1.51)); +#240556 = VECTOR('',#240557,1.); +#240557 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#240558 = PLANE('',#240559); +#240559 = AXIS2_PLACEMENT_3D('',#240560,#240561,#240562); +#240560 = CARTESIAN_POINT('',(136.271921,-79.830499,1.51)); +#240561 = DIRECTION('',(-0.499963423546,0.86604652018,0.)); +#240562 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#240563 = ADVANCED_FACE('',(#240564),#240591,.T.); +#240564 = FACE_BOUND('',#240565,.T.); +#240565 = EDGE_LOOP('',(#240566,#240567,#240576,#240584)); +#240566 = ORIENTED_EDGE('',*,*,#240545,.T.); +#240567 = ORIENTED_EDGE('',*,*,#240568,.T.); +#240568 = EDGE_CURVE('',#240538,#240569,#240571,.T.); +#240569 = VERTEX_POINT('',#240570); +#240570 = CARTESIAN_POINT('',(136.122836,-79.985195,1.545)); +#240571 = CIRCLE('',#240572,0.299999934501); +#240572 = AXIS2_PLACEMENT_3D('',#240573,#240574,#240575); +#240573 = CARTESIAN_POINT('',(136.3999998594,-80.0999998594,1.545)); +#240574 = DIRECTION('',(-0.,0.,-1.)); +#240575 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#240576 = ORIENTED_EDGE('',*,*,#240577,.F.); +#240577 = EDGE_CURVE('',#240578,#240569,#240580,.T.); +#240578 = VERTEX_POINT('',#240579); +#240579 = CARTESIAN_POINT('',(136.122836,-79.985195,1.51)); +#240580 = LINE('',#240581,#240582); +#240581 = CARTESIAN_POINT('',(136.122836,-79.985195,1.51)); +#240582 = VECTOR('',#240583,1.); +#240583 = DIRECTION('',(0.,0.,1.)); +#240584 = ORIENTED_EDGE('',*,*,#240585,.F.); +#240585 = EDGE_CURVE('',#240546,#240578,#240586,.T.); +#240586 = CIRCLE('',#240587,0.299999934501); +#240587 = AXIS2_PLACEMENT_3D('',#240588,#240589,#240590); +#240588 = CARTESIAN_POINT('',(136.3999998594,-80.0999998594,1.51)); +#240589 = DIRECTION('',(-0.,0.,-1.)); +#240590 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#240591 = CYLINDRICAL_SURFACE('',#240592,0.299999934501); +#240592 = AXIS2_PLACEMENT_3D('',#240593,#240594,#240595); +#240593 = CARTESIAN_POINT('',(136.3999998594,-80.0999998594,1.51)); +#240594 = DIRECTION('',(-0.,0.,-1.)); +#240595 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#240596 = ADVANCED_FACE('',(#240597),#240622,.T.); +#240597 = FACE_BOUND('',#240598,.T.); +#240598 = EDGE_LOOP('',(#240599,#240600,#240608,#240616)); +#240599 = ORIENTED_EDGE('',*,*,#240577,.T.); +#240600 = ORIENTED_EDGE('',*,*,#240601,.T.); +#240601 = EDGE_CURVE('',#240569,#240602,#240604,.T.); +#240602 = VERTEX_POINT('',#240603); +#240603 = CARTESIAN_POINT('',(136.130499,-79.971921,1.545)); +#240604 = LINE('',#240605,#240606); +#240605 = CARTESIAN_POINT('',(136.122836,-79.985195,1.545)); +#240606 = VECTOR('',#240607,1.); +#240607 = DIRECTION('',(0.499963423544,0.866046520181,0.)); +#240608 = ORIENTED_EDGE('',*,*,#240609,.F.); +#240609 = EDGE_CURVE('',#240610,#240602,#240612,.T.); +#240610 = VERTEX_POINT('',#240611); +#240611 = CARTESIAN_POINT('',(136.130499,-79.971921,1.51)); +#240612 = LINE('',#240613,#240614); +#240613 = CARTESIAN_POINT('',(136.130499,-79.971921,1.51)); +#240614 = VECTOR('',#240615,1.); +#240615 = DIRECTION('',(0.,0.,1.)); +#240616 = ORIENTED_EDGE('',*,*,#240617,.F.); +#240617 = EDGE_CURVE('',#240578,#240610,#240618,.T.); +#240618 = LINE('',#240619,#240620); +#240619 = CARTESIAN_POINT('',(136.122836,-79.985195,1.51)); +#240620 = VECTOR('',#240621,1.); +#240621 = DIRECTION('',(0.499963423544,0.866046520181,0.)); +#240622 = PLANE('',#240623); +#240623 = AXIS2_PLACEMENT_3D('',#240624,#240625,#240626); +#240624 = CARTESIAN_POINT('',(136.122836,-79.985195,1.51)); +#240625 = DIRECTION('',(-0.866046520181,0.499963423544,0.)); +#240626 = DIRECTION('',(0.499963423544,0.866046520181,0.)); +#240627 = ADVANCED_FACE('',(#240628),#240653,.T.); +#240628 = FACE_BOUND('',#240629,.T.); +#240629 = EDGE_LOOP('',(#240630,#240631,#240639,#240647)); +#240630 = ORIENTED_EDGE('',*,*,#240609,.T.); +#240631 = ORIENTED_EDGE('',*,*,#240632,.T.); +#240632 = EDGE_CURVE('',#240602,#240633,#240635,.T.); +#240633 = VERTEX_POINT('',#240634); +#240634 = CARTESIAN_POINT('',(135.516853,-79.355557,1.545)); +#240635 = LINE('',#240636,#240637); +#240636 = CARTESIAN_POINT('',(136.130499,-79.971921,1.545)); +#240637 = VECTOR('',#240638,1.); +#240638 = DIRECTION('',(-0.705542537809,0.708667571815,0.)); +#240639 = ORIENTED_EDGE('',*,*,#240640,.F.); +#240640 = EDGE_CURVE('',#240641,#240633,#240643,.T.); +#240641 = VERTEX_POINT('',#240642); +#240642 = CARTESIAN_POINT('',(135.516853,-79.355557,1.51)); +#240643 = LINE('',#240644,#240645); +#240644 = CARTESIAN_POINT('',(135.516853,-79.355557,1.51)); +#240645 = VECTOR('',#240646,1.); +#240646 = DIRECTION('',(0.,0.,1.)); +#240647 = ORIENTED_EDGE('',*,*,#240648,.F.); +#240648 = EDGE_CURVE('',#240610,#240641,#240649,.T.); +#240649 = LINE('',#240650,#240651); +#240650 = CARTESIAN_POINT('',(136.130499,-79.971921,1.51)); +#240651 = VECTOR('',#240652,1.); +#240652 = DIRECTION('',(-0.705542537809,0.708667571815,0.)); +#240653 = PLANE('',#240654); +#240654 = AXIS2_PLACEMENT_3D('',#240655,#240656,#240657); +#240655 = CARTESIAN_POINT('',(136.130499,-79.971921,1.51)); +#240656 = DIRECTION('',(-0.708667571815,-0.705542537809,0.)); +#240657 = DIRECTION('',(-0.705542537809,0.708667571815,0.)); +#240658 = ADVANCED_FACE('',(#240659),#240684,.T.); +#240659 = FACE_BOUND('',#240660,.T.); +#240660 = EDGE_LOOP('',(#240661,#240662,#240670,#240678)); +#240661 = ORIENTED_EDGE('',*,*,#240640,.T.); +#240662 = ORIENTED_EDGE('',*,*,#240663,.T.); +#240663 = EDGE_CURVE('',#240633,#240664,#240666,.T.); +#240664 = VERTEX_POINT('',#240665); +#240665 = CARTESIAN_POINT('',(135.501921,-79.319509,1.545)); +#240666 = LINE('',#240667,#240668); +#240667 = CARTESIAN_POINT('',(135.516853,-79.355557,1.545)); +#240668 = VECTOR('',#240669,1.); +#240669 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240670 = ORIENTED_EDGE('',*,*,#240671,.F.); +#240671 = EDGE_CURVE('',#240672,#240664,#240674,.T.); +#240672 = VERTEX_POINT('',#240673); +#240673 = CARTESIAN_POINT('',(135.501921,-79.319509,1.51)); +#240674 = LINE('',#240675,#240676); +#240675 = CARTESIAN_POINT('',(135.501921,-79.319509,1.51)); +#240676 = VECTOR('',#240677,1.); +#240677 = DIRECTION('',(0.,0.,1.)); +#240678 = ORIENTED_EDGE('',*,*,#240679,.F.); +#240679 = EDGE_CURVE('',#240641,#240672,#240680,.T.); +#240680 = LINE('',#240681,#240682); +#240681 = CARTESIAN_POINT('',(135.516853,-79.355557,1.51)); +#240682 = VECTOR('',#240683,1.); +#240683 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240684 = PLANE('',#240685); +#240685 = AXIS2_PLACEMENT_3D('',#240686,#240687,#240688); +#240686 = CARTESIAN_POINT('',(135.516853,-79.355557,1.51)); +#240687 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#240688 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240689 = ADVANCED_FACE('',(#240690),#240715,.T.); +#240690 = FACE_BOUND('',#240691,.T.); +#240691 = EDGE_LOOP('',(#240692,#240693,#240701,#240709)); +#240692 = ORIENTED_EDGE('',*,*,#240671,.T.); +#240693 = ORIENTED_EDGE('',*,*,#240694,.T.); +#240694 = EDGE_CURVE('',#240664,#240695,#240697,.T.); +#240695 = VERTEX_POINT('',#240696); +#240696 = CARTESIAN_POINT('',(135.5,-79.021982,1.545)); +#240697 = LINE('',#240698,#240699); +#240698 = CARTESIAN_POINT('',(135.501921,-79.319509,1.545)); +#240699 = VECTOR('',#240700,1.); +#240700 = DIRECTION('',(-6.456422310502E-03,0.999979157088,0.)); +#240701 = ORIENTED_EDGE('',*,*,#240702,.F.); +#240702 = EDGE_CURVE('',#240703,#240695,#240705,.T.); +#240703 = VERTEX_POINT('',#240704); +#240704 = CARTESIAN_POINT('',(135.5,-79.021982,1.51)); +#240705 = LINE('',#240706,#240707); +#240706 = CARTESIAN_POINT('',(135.5,-79.021982,1.51)); +#240707 = VECTOR('',#240708,1.); +#240708 = DIRECTION('',(0.,0.,1.)); +#240709 = ORIENTED_EDGE('',*,*,#240710,.F.); +#240710 = EDGE_CURVE('',#240672,#240703,#240711,.T.); +#240711 = LINE('',#240712,#240713); +#240712 = CARTESIAN_POINT('',(135.501921,-79.319509,1.51)); +#240713 = VECTOR('',#240714,1.); +#240714 = DIRECTION('',(-6.456422310502E-03,0.999979157088,0.)); +#240715 = PLANE('',#240716); +#240716 = AXIS2_PLACEMENT_3D('',#240717,#240718,#240719); +#240717 = CARTESIAN_POINT('',(135.501921,-79.319509,1.51)); +#240718 = DIRECTION('',(-0.999979157088,-6.456422310502E-03,0.)); +#240719 = DIRECTION('',(-6.456422310502E-03,0.999979157088,0.)); +#240720 = ADVANCED_FACE('',(#240721),#240746,.T.); +#240721 = FACE_BOUND('',#240722,.T.); +#240722 = EDGE_LOOP('',(#240723,#240724,#240732,#240740)); +#240723 = ORIENTED_EDGE('',*,*,#240702,.T.); +#240724 = ORIENTED_EDGE('',*,*,#240725,.T.); +#240725 = EDGE_CURVE('',#240695,#240726,#240728,.T.); +#240726 = VERTEX_POINT('',#240727); +#240727 = CARTESIAN_POINT('',(134.916853,-78.436117,1.545)); +#240728 = LINE('',#240729,#240730); +#240729 = CARTESIAN_POINT('',(135.5,-79.021982,1.545)); +#240730 = VECTOR('',#240731,1.); +#240731 = DIRECTION('',(-0.705460822639,0.708748917263,0.)); +#240732 = ORIENTED_EDGE('',*,*,#240733,.F.); +#240733 = EDGE_CURVE('',#240734,#240726,#240736,.T.); +#240734 = VERTEX_POINT('',#240735); +#240735 = CARTESIAN_POINT('',(134.916853,-78.436117,1.51)); +#240736 = LINE('',#240737,#240738); +#240737 = CARTESIAN_POINT('',(134.916853,-78.436117,1.51)); +#240738 = VECTOR('',#240739,1.); +#240739 = DIRECTION('',(0.,0.,1.)); +#240740 = ORIENTED_EDGE('',*,*,#240741,.F.); +#240741 = EDGE_CURVE('',#240703,#240734,#240742,.T.); +#240742 = LINE('',#240743,#240744); +#240743 = CARTESIAN_POINT('',(135.5,-79.021982,1.51)); +#240744 = VECTOR('',#240745,1.); +#240745 = DIRECTION('',(-0.705460822639,0.708748917263,0.)); +#240746 = PLANE('',#240747); +#240747 = AXIS2_PLACEMENT_3D('',#240748,#240749,#240750); +#240748 = CARTESIAN_POINT('',(135.5,-79.021982,1.51)); +#240749 = DIRECTION('',(-0.708748917263,-0.705460822639,0.)); +#240750 = DIRECTION('',(-0.705460822639,0.708748917263,0.)); +#240751 = ADVANCED_FACE('',(#240752),#240777,.T.); +#240752 = FACE_BOUND('',#240753,.T.); +#240753 = EDGE_LOOP('',(#240754,#240755,#240763,#240771)); +#240754 = ORIENTED_EDGE('',*,*,#240733,.T.); +#240755 = ORIENTED_EDGE('',*,*,#240756,.T.); +#240756 = EDGE_CURVE('',#240726,#240757,#240759,.T.); +#240757 = VERTEX_POINT('',#240758); +#240758 = CARTESIAN_POINT('',(134.901921,-78.400069,1.545)); +#240759 = LINE('',#240760,#240761); +#240760 = CARTESIAN_POINT('',(134.916853,-78.436117,1.545)); +#240761 = VECTOR('',#240762,1.); +#240762 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240763 = ORIENTED_EDGE('',*,*,#240764,.F.); +#240764 = EDGE_CURVE('',#240765,#240757,#240767,.T.); +#240765 = VERTEX_POINT('',#240766); +#240766 = CARTESIAN_POINT('',(134.901921,-78.400069,1.51)); +#240767 = LINE('',#240768,#240769); +#240768 = CARTESIAN_POINT('',(134.901921,-78.400069,1.51)); +#240769 = VECTOR('',#240770,1.); +#240770 = DIRECTION('',(0.,0.,1.)); +#240771 = ORIENTED_EDGE('',*,*,#240772,.F.); +#240772 = EDGE_CURVE('',#240734,#240765,#240773,.T.); +#240773 = LINE('',#240774,#240775); +#240774 = CARTESIAN_POINT('',(134.916853,-78.436117,1.51)); +#240775 = VECTOR('',#240776,1.); +#240776 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240777 = PLANE('',#240778); +#240778 = AXIS2_PLACEMENT_3D('',#240779,#240780,#240781); +#240779 = CARTESIAN_POINT('',(134.916853,-78.436117,1.51)); +#240780 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#240781 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#240782 = ADVANCED_FACE('',(#240783),#240808,.T.); +#240783 = FACE_BOUND('',#240784,.T.); +#240784 = EDGE_LOOP('',(#240785,#240786,#240794,#240802)); +#240785 = ORIENTED_EDGE('',*,*,#240764,.T.); +#240786 = ORIENTED_EDGE('',*,*,#240787,.T.); +#240787 = EDGE_CURVE('',#240757,#240788,#240790,.T.); +#240788 = VERTEX_POINT('',#240789); +#240789 = CARTESIAN_POINT('',(134.901921,-76.130491,1.545)); +#240790 = LINE('',#240791,#240792); +#240791 = CARTESIAN_POINT('',(134.901921,-78.400069,1.545)); +#240792 = VECTOR('',#240793,1.); +#240793 = DIRECTION('',(0.,1.,0.)); +#240794 = ORIENTED_EDGE('',*,*,#240795,.F.); +#240795 = EDGE_CURVE('',#240796,#240788,#240798,.T.); +#240796 = VERTEX_POINT('',#240797); +#240797 = CARTESIAN_POINT('',(134.901921,-76.130491,1.51)); +#240798 = LINE('',#240799,#240800); +#240799 = CARTESIAN_POINT('',(134.901921,-76.130491,1.51)); +#240800 = VECTOR('',#240801,1.); +#240801 = DIRECTION('',(0.,0.,1.)); +#240802 = ORIENTED_EDGE('',*,*,#240803,.F.); +#240803 = EDGE_CURVE('',#240765,#240796,#240804,.T.); +#240804 = LINE('',#240805,#240806); +#240805 = CARTESIAN_POINT('',(134.901921,-78.400069,1.51)); +#240806 = VECTOR('',#240807,1.); +#240807 = DIRECTION('',(0.,1.,0.)); +#240808 = PLANE('',#240809); +#240809 = AXIS2_PLACEMENT_3D('',#240810,#240811,#240812); +#240810 = CARTESIAN_POINT('',(134.901921,-78.400069,1.51)); +#240811 = DIRECTION('',(-1.,0.,0.)); +#240812 = DIRECTION('',(0.,1.,0.)); +#240813 = ADVANCED_FACE('',(#240814),#240839,.T.); +#240814 = FACE_BOUND('',#240815,.T.); +#240815 = EDGE_LOOP('',(#240816,#240817,#240825,#240833)); +#240816 = ORIENTED_EDGE('',*,*,#240795,.T.); +#240817 = ORIENTED_EDGE('',*,*,#240818,.T.); +#240818 = EDGE_CURVE('',#240788,#240819,#240821,.T.); +#240819 = VERTEX_POINT('',#240820); +#240820 = CARTESIAN_POINT('',(134.916853,-76.094443,1.545)); +#240821 = LINE('',#240822,#240823); +#240822 = CARTESIAN_POINT('',(134.901921,-76.130491,1.545)); +#240823 = VECTOR('',#240824,1.); +#240824 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#240825 = ORIENTED_EDGE('',*,*,#240826,.F.); +#240826 = EDGE_CURVE('',#240827,#240819,#240829,.T.); +#240827 = VERTEX_POINT('',#240828); +#240828 = CARTESIAN_POINT('',(134.916853,-76.094443,1.51)); +#240829 = LINE('',#240830,#240831); +#240830 = CARTESIAN_POINT('',(134.916853,-76.094443,1.51)); +#240831 = VECTOR('',#240832,1.); +#240832 = DIRECTION('',(0.,0.,1.)); +#240833 = ORIENTED_EDGE('',*,*,#240834,.F.); +#240834 = EDGE_CURVE('',#240796,#240827,#240835,.T.); +#240835 = LINE('',#240836,#240837); +#240836 = CARTESIAN_POINT('',(134.901921,-76.130491,1.51)); +#240837 = VECTOR('',#240838,1.); +#240838 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#240839 = PLANE('',#240840); +#240840 = AXIS2_PLACEMENT_3D('',#240841,#240842,#240843); +#240841 = CARTESIAN_POINT('',(134.901921,-76.130491,1.51)); +#240842 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#240843 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#240844 = ADVANCED_FACE('',(#240845),#240870,.T.); +#240845 = FACE_BOUND('',#240846,.T.); +#240846 = EDGE_LOOP('',(#240847,#240848,#240856,#240864)); +#240847 = ORIENTED_EDGE('',*,*,#240826,.T.); +#240848 = ORIENTED_EDGE('',*,*,#240849,.T.); +#240849 = EDGE_CURVE('',#240819,#240850,#240852,.T.); +#240850 = VERTEX_POINT('',#240851); +#240851 = CARTESIAN_POINT('',(136.244443,-74.766852,1.545)); +#240852 = LINE('',#240853,#240854); +#240853 = CARTESIAN_POINT('',(134.916853,-76.094443,1.545)); +#240854 = VECTOR('',#240855,1.); +#240855 = DIRECTION('',(0.707106514874,0.707107047499,0.)); +#240856 = ORIENTED_EDGE('',*,*,#240857,.F.); +#240857 = EDGE_CURVE('',#240858,#240850,#240860,.T.); +#240858 = VERTEX_POINT('',#240859); +#240859 = CARTESIAN_POINT('',(136.244443,-74.766852,1.51)); +#240860 = LINE('',#240861,#240862); +#240861 = CARTESIAN_POINT('',(136.244443,-74.766852,1.51)); +#240862 = VECTOR('',#240863,1.); +#240863 = DIRECTION('',(0.,0.,1.)); +#240864 = ORIENTED_EDGE('',*,*,#240865,.F.); +#240865 = EDGE_CURVE('',#240827,#240858,#240866,.T.); +#240866 = LINE('',#240867,#240868); +#240867 = CARTESIAN_POINT('',(134.916853,-76.094443,1.51)); +#240868 = VECTOR('',#240869,1.); +#240869 = DIRECTION('',(0.707106514874,0.707107047499,0.)); +#240870 = PLANE('',#240871); +#240871 = AXIS2_PLACEMENT_3D('',#240872,#240873,#240874); +#240872 = CARTESIAN_POINT('',(134.916853,-76.094443,1.51)); +#240873 = DIRECTION('',(-0.707107047499,0.707106514874,0.)); +#240874 = DIRECTION('',(0.707106514874,0.707107047499,0.)); +#240875 = ADVANCED_FACE('',(#240876),#240901,.T.); +#240876 = FACE_BOUND('',#240877,.T.); +#240877 = EDGE_LOOP('',(#240878,#240879,#240887,#240895)); +#240878 = ORIENTED_EDGE('',*,*,#240857,.T.); +#240879 = ORIENTED_EDGE('',*,*,#240880,.T.); +#240880 = EDGE_CURVE('',#240850,#240881,#240883,.T.); +#240881 = VERTEX_POINT('',#240882); +#240882 = CARTESIAN_POINT('',(136.280491,-74.751921,1.545)); +#240883 = LINE('',#240884,#240885); +#240884 = CARTESIAN_POINT('',(136.244443,-74.766852,1.545)); +#240885 = VECTOR('',#240886,1.); +#240886 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#240887 = ORIENTED_EDGE('',*,*,#240888,.F.); +#240888 = EDGE_CURVE('',#240889,#240881,#240891,.T.); +#240889 = VERTEX_POINT('',#240890); +#240890 = CARTESIAN_POINT('',(136.280491,-74.751921,1.51)); +#240891 = LINE('',#240892,#240893); +#240892 = CARTESIAN_POINT('',(136.280491,-74.751921,1.51)); +#240893 = VECTOR('',#240894,1.); +#240894 = DIRECTION('',(0.,0.,1.)); +#240895 = ORIENTED_EDGE('',*,*,#240896,.F.); +#240896 = EDGE_CURVE('',#240858,#240889,#240897,.T.); +#240897 = LINE('',#240898,#240899); +#240898 = CARTESIAN_POINT('',(136.244443,-74.766852,1.51)); +#240899 = VECTOR('',#240900,1.); +#240900 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#240901 = PLANE('',#240902); +#240902 = AXIS2_PLACEMENT_3D('',#240903,#240904,#240905); +#240903 = CARTESIAN_POINT('',(136.244443,-74.766852,1.51)); +#240904 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#240905 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#240906 = ADVANCED_FACE('',(#240907),#240932,.T.); +#240907 = FACE_BOUND('',#240908,.T.); +#240908 = EDGE_LOOP('',(#240909,#240910,#240918,#240926)); +#240909 = ORIENTED_EDGE('',*,*,#240888,.T.); +#240910 = ORIENTED_EDGE('',*,*,#240911,.T.); +#240911 = EDGE_CURVE('',#240881,#240912,#240914,.T.); +#240912 = VERTEX_POINT('',#240913); +#240913 = CARTESIAN_POINT('',(140.208578,-74.75,1.545)); +#240914 = LINE('',#240915,#240916); +#240915 = CARTESIAN_POINT('',(136.280491,-74.751921,1.545)); +#240916 = VECTOR('',#240917,1.); +#240917 = DIRECTION('',(0.999999880419,4.8904206304E-04,0.)); +#240918 = ORIENTED_EDGE('',*,*,#240919,.F.); +#240919 = EDGE_CURVE('',#240920,#240912,#240922,.T.); +#240920 = VERTEX_POINT('',#240921); +#240921 = CARTESIAN_POINT('',(140.208578,-74.75,1.51)); +#240922 = LINE('',#240923,#240924); +#240923 = CARTESIAN_POINT('',(140.208578,-74.75,1.51)); +#240924 = VECTOR('',#240925,1.); +#240925 = DIRECTION('',(0.,0.,1.)); +#240926 = ORIENTED_EDGE('',*,*,#240927,.F.); +#240927 = EDGE_CURVE('',#240889,#240920,#240928,.T.); +#240928 = LINE('',#240929,#240930); +#240929 = CARTESIAN_POINT('',(136.280491,-74.751921,1.51)); +#240930 = VECTOR('',#240931,1.); +#240931 = DIRECTION('',(0.999999880419,4.8904206304E-04,0.)); +#240932 = PLANE('',#240933); +#240933 = AXIS2_PLACEMENT_3D('',#240934,#240935,#240936); +#240934 = CARTESIAN_POINT('',(136.280491,-74.751921,1.51)); +#240935 = DIRECTION('',(-4.8904206304E-04,0.999999880419,0.)); +#240936 = DIRECTION('',(0.999999880419,4.8904206304E-04,0.)); +#240937 = ADVANCED_FACE('',(#240938),#240954,.T.); +#240938 = FACE_BOUND('',#240939,.T.); +#240939 = EDGE_LOOP('',(#240940,#240941,#240947,#240948)); +#240940 = ORIENTED_EDGE('',*,*,#240919,.T.); +#240941 = ORIENTED_EDGE('',*,*,#240942,.T.); +#240942 = EDGE_CURVE('',#240912,#240125,#240943,.T.); +#240943 = LINE('',#240944,#240945); +#240944 = CARTESIAN_POINT('',(140.208578,-74.75,1.545)); +#240945 = VECTOR('',#240946,1.); +#240946 = DIRECTION('',(0.707481396556,0.706731967246,0.)); +#240947 = ORIENTED_EDGE('',*,*,#240122,.F.); +#240948 = ORIENTED_EDGE('',*,*,#240949,.F.); +#240949 = EDGE_CURVE('',#240920,#240123,#240950,.T.); +#240950 = LINE('',#240951,#240952); +#240951 = CARTESIAN_POINT('',(140.208578,-74.75,1.51)); +#240952 = VECTOR('',#240953,1.); +#240953 = DIRECTION('',(0.707481396556,0.706731967246,0.)); +#240954 = PLANE('',#240955); +#240955 = AXIS2_PLACEMENT_3D('',#240956,#240957,#240958); +#240956 = CARTESIAN_POINT('',(140.208578,-74.75,1.51)); +#240957 = DIRECTION('',(-0.706731967246,0.707481396556,0.)); +#240958 = DIRECTION('',(0.707481396556,0.706731967246,0.)); +#240959 = ADVANCED_FACE('',(#240960),#240987,.F.); +#240960 = FACE_BOUND('',#240961,.T.); +#240961 = EDGE_LOOP('',(#240962,#240972,#240979,#240980)); +#240962 = ORIENTED_EDGE('',*,*,#240963,.T.); +#240963 = EDGE_CURVE('',#240964,#240966,#240968,.T.); +#240964 = VERTEX_POINT('',#240965); +#240965 = CARTESIAN_POINT('',(136.537255,-80.1,1.51)); +#240966 = VERTEX_POINT('',#240967); +#240967 = CARTESIAN_POINT('',(136.537255,-80.1,1.545)); +#240968 = LINE('',#240969,#240970); +#240969 = CARTESIAN_POINT('',(136.537255,-80.1,1.51)); +#240970 = VECTOR('',#240971,1.); +#240971 = DIRECTION('',(0.,0.,1.)); +#240972 = ORIENTED_EDGE('',*,*,#240973,.T.); +#240973 = EDGE_CURVE('',#240966,#240966,#240974,.T.); +#240974 = CIRCLE('',#240975,0.137255); +#240975 = AXIS2_PLACEMENT_3D('',#240976,#240977,#240978); +#240976 = CARTESIAN_POINT('',(136.4,-80.1,1.545)); +#240977 = DIRECTION('',(0.,0.,1.)); +#240978 = DIRECTION('',(1.,0.,-0.)); +#240979 = ORIENTED_EDGE('',*,*,#240963,.F.); +#240980 = ORIENTED_EDGE('',*,*,#240981,.F.); +#240981 = EDGE_CURVE('',#240964,#240964,#240982,.T.); +#240982 = CIRCLE('',#240983,0.137255); +#240983 = AXIS2_PLACEMENT_3D('',#240984,#240985,#240986); +#240984 = CARTESIAN_POINT('',(136.4,-80.1,1.51)); +#240985 = DIRECTION('',(0.,0.,1.)); +#240986 = DIRECTION('',(1.,0.,-0.)); +#240987 = CYLINDRICAL_SURFACE('',#240988,0.137255); +#240988 = AXIS2_PLACEMENT_3D('',#240989,#240990,#240991); +#240989 = CARTESIAN_POINT('',(136.4,-80.1,1.51)); +#240990 = DIRECTION('',(-0.,-0.,-1.)); +#240991 = DIRECTION('',(1.,0.,-0.)); +#240992 = ADVANCED_FACE('',(#240993,#241022),#241025,.F.); +#240993 = FACE_BOUND('',#240994,.T.); +#240994 = EDGE_LOOP('',(#240995,#240996,#240997,#240998,#240999,#241000, + #241001,#241002,#241003,#241004,#241005,#241006,#241007,#241008, + #241009,#241010,#241011,#241012,#241013,#241014,#241015,#241016, + #241017,#241018,#241019,#241020,#241021)); +#240995 = ORIENTED_EDGE('',*,*,#240148,.T.); +#240996 = ORIENTED_EDGE('',*,*,#240179,.T.); +#240997 = ORIENTED_EDGE('',*,*,#240211,.T.); +#240998 = ORIENTED_EDGE('',*,*,#240243,.T.); +#240999 = ORIENTED_EDGE('',*,*,#240274,.T.); +#241000 = ORIENTED_EDGE('',*,*,#240305,.T.); +#241001 = ORIENTED_EDGE('',*,*,#240336,.T.); +#241002 = ORIENTED_EDGE('',*,*,#240367,.T.); +#241003 = ORIENTED_EDGE('',*,*,#240398,.T.); +#241004 = ORIENTED_EDGE('',*,*,#240429,.T.); +#241005 = ORIENTED_EDGE('',*,*,#240460,.T.); +#241006 = ORIENTED_EDGE('',*,*,#240491,.T.); +#241007 = ORIENTED_EDGE('',*,*,#240522,.T.); +#241008 = ORIENTED_EDGE('',*,*,#240553,.T.); +#241009 = ORIENTED_EDGE('',*,*,#240585,.T.); +#241010 = ORIENTED_EDGE('',*,*,#240617,.T.); +#241011 = ORIENTED_EDGE('',*,*,#240648,.T.); +#241012 = ORIENTED_EDGE('',*,*,#240679,.T.); +#241013 = ORIENTED_EDGE('',*,*,#240710,.T.); +#241014 = ORIENTED_EDGE('',*,*,#240741,.T.); +#241015 = ORIENTED_EDGE('',*,*,#240772,.T.); +#241016 = ORIENTED_EDGE('',*,*,#240803,.T.); +#241017 = ORIENTED_EDGE('',*,*,#240834,.T.); +#241018 = ORIENTED_EDGE('',*,*,#240865,.T.); +#241019 = ORIENTED_EDGE('',*,*,#240896,.T.); +#241020 = ORIENTED_EDGE('',*,*,#240927,.T.); +#241021 = ORIENTED_EDGE('',*,*,#240949,.T.); +#241022 = FACE_BOUND('',#241023,.T.); +#241023 = EDGE_LOOP('',(#241024)); +#241024 = ORIENTED_EDGE('',*,*,#240981,.T.); +#241025 = PLANE('',#241026); +#241026 = AXIS2_PLACEMENT_3D('',#241027,#241028,#241029); +#241027 = CARTESIAN_POINT('',(0.,0.,1.51)); +#241028 = DIRECTION('',(0.,0.,1.)); +#241029 = DIRECTION('',(1.,0.,-0.)); +#241030 = ADVANCED_FACE('',(#241031,#241060),#241063,.T.); +#241031 = FACE_BOUND('',#241032,.F.); +#241032 = EDGE_LOOP('',(#241033,#241034,#241035,#241036,#241037,#241038, + #241039,#241040,#241041,#241042,#241043,#241044,#241045,#241046, + #241047,#241048,#241049,#241050,#241051,#241052,#241053,#241054, + #241055,#241056,#241057,#241058,#241059)); +#241033 = ORIENTED_EDGE('',*,*,#240132,.T.); +#241034 = ORIENTED_EDGE('',*,*,#240163,.T.); +#241035 = ORIENTED_EDGE('',*,*,#240194,.T.); +#241036 = ORIENTED_EDGE('',*,*,#240227,.T.); +#241037 = ORIENTED_EDGE('',*,*,#240258,.T.); +#241038 = ORIENTED_EDGE('',*,*,#240289,.T.); +#241039 = ORIENTED_EDGE('',*,*,#240320,.T.); +#241040 = ORIENTED_EDGE('',*,*,#240351,.T.); +#241041 = ORIENTED_EDGE('',*,*,#240382,.T.); +#241042 = ORIENTED_EDGE('',*,*,#240413,.T.); +#241043 = ORIENTED_EDGE('',*,*,#240444,.T.); +#241044 = ORIENTED_EDGE('',*,*,#240475,.T.); +#241045 = ORIENTED_EDGE('',*,*,#240506,.T.); +#241046 = ORIENTED_EDGE('',*,*,#240537,.T.); +#241047 = ORIENTED_EDGE('',*,*,#240568,.T.); +#241048 = ORIENTED_EDGE('',*,*,#240601,.T.); +#241049 = ORIENTED_EDGE('',*,*,#240632,.T.); +#241050 = ORIENTED_EDGE('',*,*,#240663,.T.); +#241051 = ORIENTED_EDGE('',*,*,#240694,.T.); +#241052 = ORIENTED_EDGE('',*,*,#240725,.T.); +#241053 = ORIENTED_EDGE('',*,*,#240756,.T.); +#241054 = ORIENTED_EDGE('',*,*,#240787,.T.); +#241055 = ORIENTED_EDGE('',*,*,#240818,.T.); +#241056 = ORIENTED_EDGE('',*,*,#240849,.T.); +#241057 = ORIENTED_EDGE('',*,*,#240880,.T.); +#241058 = ORIENTED_EDGE('',*,*,#240911,.T.); +#241059 = ORIENTED_EDGE('',*,*,#240942,.T.); +#241060 = FACE_BOUND('',#241061,.F.); +#241061 = EDGE_LOOP('',(#241062)); +#241062 = ORIENTED_EDGE('',*,*,#240973,.T.); +#241063 = PLANE('',#241064); +#241064 = AXIS2_PLACEMENT_3D('',#241065,#241066,#241067); +#241065 = CARTESIAN_POINT('',(0.,0.,1.545)); +#241066 = DIRECTION('',(0.,0.,1.)); +#241067 = DIRECTION('',(1.,0.,-0.)); +#241068 = MANIFOLD_SOLID_BREP('',#241069); +#241069 = CLOSED_SHELL('',(#241070,#241112,#241143,#241174,#241205, + #241236,#241267,#241298,#241329,#241360,#241393,#241424,#241455, + #241488,#241519,#241550,#241581,#241612,#241634,#241667,#241696)); +#241070 = ADVANCED_FACE('',(#241071),#241107,.T.); +#241071 = FACE_BOUND('',#241072,.F.); +#241072 = EDGE_LOOP('',(#241073,#241083,#241092,#241100)); +#241073 = ORIENTED_EDGE('',*,*,#241074,.T.); +#241074 = EDGE_CURVE('',#241075,#241077,#241079,.T.); +#241075 = VERTEX_POINT('',#241076); +#241076 = CARTESIAN_POINT('',(134.030491,-119.098079,0.)); +#241077 = VERTEX_POINT('',#241078); +#241078 = CARTESIAN_POINT('',(134.030491,-119.098079,-3.5E-02)); +#241079 = LINE('',#241080,#241081); +#241080 = CARTESIAN_POINT('',(134.030491,-119.098079,0.)); +#241081 = VECTOR('',#241082,1.); +#241082 = DIRECTION('',(0.,0.,-1.)); +#241083 = ORIENTED_EDGE('',*,*,#241084,.T.); +#241084 = EDGE_CURVE('',#241077,#241085,#241087,.T.); +#241085 = VERTEX_POINT('',#241086); +#241086 = CARTESIAN_POINT('',(134.030491,-118.901921,-3.5E-02)); +#241087 = CIRCLE('',#241088,0.100000456609); +#241088 = AXIS2_PLACEMENT_3D('',#241089,#241090,#241091); +#241089 = CARTESIAN_POINT('',(134.05,-119.,-3.5E-02)); +#241090 = DIRECTION('',(0.,0.,-1.)); +#241091 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#241092 = ORIENTED_EDGE('',*,*,#241093,.F.); +#241093 = EDGE_CURVE('',#241094,#241085,#241096,.T.); +#241094 = VERTEX_POINT('',#241095); +#241095 = CARTESIAN_POINT('',(134.030491,-118.901921,0.)); +#241096 = LINE('',#241097,#241098); +#241097 = CARTESIAN_POINT('',(134.030491,-118.901921,0.)); +#241098 = VECTOR('',#241099,1.); +#241099 = DIRECTION('',(0.,0.,-1.)); +#241100 = ORIENTED_EDGE('',*,*,#241101,.F.); +#241101 = EDGE_CURVE('',#241075,#241094,#241102,.T.); +#241102 = CIRCLE('',#241103,0.100000456609); +#241103 = AXIS2_PLACEMENT_3D('',#241104,#241105,#241106); +#241104 = CARTESIAN_POINT('',(134.05,-119.,0.)); +#241105 = DIRECTION('',(0.,0.,-1.)); +#241106 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#241107 = CYLINDRICAL_SURFACE('',#241108,0.100000456609); +#241108 = AXIS2_PLACEMENT_3D('',#241109,#241110,#241111); +#241109 = CARTESIAN_POINT('',(134.05,-119.,0.)); +#241110 = DIRECTION('',(-0.,-0.,1.)); +#241111 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#241112 = ADVANCED_FACE('',(#241113),#241138,.F.); +#241113 = FACE_BOUND('',#241114,.F.); +#241114 = EDGE_LOOP('',(#241115,#241116,#241124,#241132)); +#241115 = ORIENTED_EDGE('',*,*,#241093,.T.); +#241116 = ORIENTED_EDGE('',*,*,#241117,.T.); +#241117 = EDGE_CURVE('',#241085,#241118,#241120,.T.); +#241118 = VERTEX_POINT('',#241119); +#241119 = CARTESIAN_POINT('',(134.835195,-118.901921,-3.5E-02)); +#241120 = LINE('',#241121,#241122); +#241121 = CARTESIAN_POINT('',(134.030491,-118.901921,-3.5E-02)); +#241122 = VECTOR('',#241123,1.); +#241123 = DIRECTION('',(1.,0.,0.)); +#241124 = ORIENTED_EDGE('',*,*,#241125,.F.); +#241125 = EDGE_CURVE('',#241126,#241118,#241128,.T.); +#241126 = VERTEX_POINT('',#241127); +#241127 = CARTESIAN_POINT('',(134.835195,-118.901921,0.)); +#241128 = LINE('',#241129,#241130); +#241129 = CARTESIAN_POINT('',(134.835195,-118.901921,0.)); +#241130 = VECTOR('',#241131,1.); +#241131 = DIRECTION('',(0.,0.,-1.)); +#241132 = ORIENTED_EDGE('',*,*,#241133,.F.); +#241133 = EDGE_CURVE('',#241094,#241126,#241134,.T.); +#241134 = LINE('',#241135,#241136); +#241135 = CARTESIAN_POINT('',(134.030491,-118.901921,0.)); +#241136 = VECTOR('',#241137,1.); +#241137 = DIRECTION('',(1.,0.,0.)); +#241138 = PLANE('',#241139); +#241139 = AXIS2_PLACEMENT_3D('',#241140,#241141,#241142); +#241140 = CARTESIAN_POINT('',(134.030491,-118.901921,0.)); +#241141 = DIRECTION('',(0.,-1.,0.)); +#241142 = DIRECTION('',(1.,0.,0.)); +#241143 = ADVANCED_FACE('',(#241144),#241169,.F.); +#241144 = FACE_BOUND('',#241145,.F.); +#241145 = EDGE_LOOP('',(#241146,#241147,#241155,#241163)); +#241146 = ORIENTED_EDGE('',*,*,#241125,.T.); +#241147 = ORIENTED_EDGE('',*,*,#241148,.T.); +#241148 = EDGE_CURVE('',#241118,#241149,#241151,.T.); +#241149 = VERTEX_POINT('',#241150); +#241150 = CARTESIAN_POINT('',(134.871243,-118.916853,-3.5E-02)); +#241151 = LINE('',#241152,#241153); +#241152 = CARTESIAN_POINT('',(134.835195,-118.901921,-3.5E-02)); +#241153 = VECTOR('',#241154,1.); +#241154 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#241155 = ORIENTED_EDGE('',*,*,#241156,.F.); +#241156 = EDGE_CURVE('',#241157,#241149,#241159,.T.); +#241157 = VERTEX_POINT('',#241158); +#241158 = CARTESIAN_POINT('',(134.871243,-118.916853,0.)); +#241159 = LINE('',#241160,#241161); +#241160 = CARTESIAN_POINT('',(134.871243,-118.916853,0.)); +#241161 = VECTOR('',#241162,1.); +#241162 = DIRECTION('',(0.,0.,-1.)); +#241163 = ORIENTED_EDGE('',*,*,#241164,.F.); +#241164 = EDGE_CURVE('',#241126,#241157,#241165,.T.); +#241165 = LINE('',#241166,#241167); +#241166 = CARTESIAN_POINT('',(134.835195,-118.901921,0.)); +#241167 = VECTOR('',#241168,1.); +#241168 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#241169 = PLANE('',#241170); +#241170 = AXIS2_PLACEMENT_3D('',#241171,#241172,#241173); +#241171 = CARTESIAN_POINT('',(134.835195,-118.901921,0.)); +#241172 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#241173 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#241174 = ADVANCED_FACE('',(#241175),#241200,.F.); +#241175 = FACE_BOUND('',#241176,.F.); +#241176 = EDGE_LOOP('',(#241177,#241178,#241186,#241194)); +#241177 = ORIENTED_EDGE('',*,*,#241156,.T.); +#241178 = ORIENTED_EDGE('',*,*,#241179,.T.); +#241179 = EDGE_CURVE('',#241149,#241180,#241182,.T.); +#241180 = VERTEX_POINT('',#241181); +#241181 = CARTESIAN_POINT('',(135.783147,-119.828757,-3.5E-02)); +#241182 = LINE('',#241183,#241184); +#241183 = CARTESIAN_POINT('',(134.871243,-118.916853,-3.5E-02)); +#241184 = VECTOR('',#241185,1.); +#241185 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241186 = ORIENTED_EDGE('',*,*,#241187,.F.); +#241187 = EDGE_CURVE('',#241188,#241180,#241190,.T.); +#241188 = VERTEX_POINT('',#241189); +#241189 = CARTESIAN_POINT('',(135.783147,-119.828757,0.)); +#241190 = LINE('',#241191,#241192); +#241191 = CARTESIAN_POINT('',(135.783147,-119.828757,0.)); +#241192 = VECTOR('',#241193,1.); +#241193 = DIRECTION('',(0.,0.,-1.)); +#241194 = ORIENTED_EDGE('',*,*,#241195,.F.); +#241195 = EDGE_CURVE('',#241157,#241188,#241196,.T.); +#241196 = LINE('',#241197,#241198); +#241197 = CARTESIAN_POINT('',(134.871243,-118.916853,0.)); +#241198 = VECTOR('',#241199,1.); +#241199 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241200 = PLANE('',#241201); +#241201 = AXIS2_PLACEMENT_3D('',#241202,#241203,#241204); +#241202 = CARTESIAN_POINT('',(134.871243,-118.916853,0.)); +#241203 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#241204 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241205 = ADVANCED_FACE('',(#241206),#241231,.F.); +#241206 = FACE_BOUND('',#241207,.F.); +#241207 = EDGE_LOOP('',(#241208,#241209,#241217,#241225)); +#241208 = ORIENTED_EDGE('',*,*,#241187,.T.); +#241209 = ORIENTED_EDGE('',*,*,#241210,.T.); +#241210 = EDGE_CURVE('',#241180,#241211,#241213,.T.); +#241211 = VERTEX_POINT('',#241212); +#241212 = CARTESIAN_POINT('',(135.798079,-119.864805,-3.5E-02)); +#241213 = LINE('',#241214,#241215); +#241214 = CARTESIAN_POINT('',(135.783147,-119.828757,-3.5E-02)); +#241215 = VECTOR('',#241216,1.); +#241216 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241217 = ORIENTED_EDGE('',*,*,#241218,.F.); +#241218 = EDGE_CURVE('',#241219,#241211,#241221,.T.); +#241219 = VERTEX_POINT('',#241220); +#241220 = CARTESIAN_POINT('',(135.798079,-119.864805,0.)); +#241221 = LINE('',#241222,#241223); +#241222 = CARTESIAN_POINT('',(135.798079,-119.864805,0.)); +#241223 = VECTOR('',#241224,1.); +#241224 = DIRECTION('',(0.,0.,-1.)); +#241225 = ORIENTED_EDGE('',*,*,#241226,.F.); +#241226 = EDGE_CURVE('',#241188,#241219,#241227,.T.); +#241227 = LINE('',#241228,#241229); +#241228 = CARTESIAN_POINT('',(135.783147,-119.828757,0.)); +#241229 = VECTOR('',#241230,1.); +#241230 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241231 = PLANE('',#241232); +#241232 = AXIS2_PLACEMENT_3D('',#241233,#241234,#241235); +#241233 = CARTESIAN_POINT('',(135.783147,-119.828757,0.)); +#241234 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#241235 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241236 = ADVANCED_FACE('',(#241237),#241262,.F.); +#241237 = FACE_BOUND('',#241238,.F.); +#241238 = EDGE_LOOP('',(#241239,#241240,#241248,#241256)); +#241239 = ORIENTED_EDGE('',*,*,#241218,.T.); +#241240 = ORIENTED_EDGE('',*,*,#241241,.T.); +#241241 = EDGE_CURVE('',#241211,#241242,#241244,.T.); +#241242 = VERTEX_POINT('',#241243); +#241243 = CARTESIAN_POINT('',(135.8,-121.368578,-3.5E-02)); +#241244 = LINE('',#241245,#241246); +#241245 = CARTESIAN_POINT('',(135.798079,-119.864805,-3.5E-02)); +#241246 = VECTOR('',#241247,1.); +#241247 = DIRECTION('',(1.277452403112E-03,-0.999999184057,0.)); +#241248 = ORIENTED_EDGE('',*,*,#241249,.F.); +#241249 = EDGE_CURVE('',#241250,#241242,#241252,.T.); +#241250 = VERTEX_POINT('',#241251); +#241251 = CARTESIAN_POINT('',(135.8,-121.368578,0.)); +#241252 = LINE('',#241253,#241254); +#241253 = CARTESIAN_POINT('',(135.8,-121.368578,0.)); +#241254 = VECTOR('',#241255,1.); +#241255 = DIRECTION('',(0.,0.,-1.)); +#241256 = ORIENTED_EDGE('',*,*,#241257,.F.); +#241257 = EDGE_CURVE('',#241219,#241250,#241258,.T.); +#241258 = LINE('',#241259,#241260); +#241259 = CARTESIAN_POINT('',(135.798079,-119.864805,0.)); +#241260 = VECTOR('',#241261,1.); +#241261 = DIRECTION('',(1.277452403112E-03,-0.999999184057,0.)); +#241262 = PLANE('',#241263); +#241263 = AXIS2_PLACEMENT_3D('',#241264,#241265,#241266); +#241264 = CARTESIAN_POINT('',(135.798079,-119.864805,0.)); +#241265 = DIRECTION('',(-0.999999184057,-1.277452403112E-03,-0.)); +#241266 = DIRECTION('',(1.277452403112E-03,-0.999999184057,0.)); +#241267 = ADVANCED_FACE('',(#241268),#241293,.F.); +#241268 = FACE_BOUND('',#241269,.F.); +#241269 = EDGE_LOOP('',(#241270,#241271,#241279,#241287)); +#241270 = ORIENTED_EDGE('',*,*,#241249,.T.); +#241271 = ORIENTED_EDGE('',*,*,#241272,.T.); +#241272 = EDGE_CURVE('',#241242,#241273,#241275,.T.); +#241273 = VERTEX_POINT('',#241274); +#241274 = CARTESIAN_POINT('',(136.99,-122.558578,-3.5E-02)); +#241275 = LINE('',#241276,#241277); +#241276 = CARTESIAN_POINT('',(135.8,-121.368578,-3.5E-02)); +#241277 = VECTOR('',#241278,1.); +#241278 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241279 = ORIENTED_EDGE('',*,*,#241280,.F.); +#241280 = EDGE_CURVE('',#241281,#241273,#241283,.T.); +#241281 = VERTEX_POINT('',#241282); +#241282 = CARTESIAN_POINT('',(136.99,-122.558578,0.)); +#241283 = LINE('',#241284,#241285); +#241284 = CARTESIAN_POINT('',(136.99,-122.558578,0.)); +#241285 = VECTOR('',#241286,1.); +#241286 = DIRECTION('',(0.,0.,-1.)); +#241287 = ORIENTED_EDGE('',*,*,#241288,.F.); +#241288 = EDGE_CURVE('',#241250,#241281,#241289,.T.); +#241289 = LINE('',#241290,#241291); +#241290 = CARTESIAN_POINT('',(135.8,-121.368578,0.)); +#241291 = VECTOR('',#241292,1.); +#241292 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241293 = PLANE('',#241294); +#241294 = AXIS2_PLACEMENT_3D('',#241295,#241296,#241297); +#241295 = CARTESIAN_POINT('',(135.8,-121.368578,0.)); +#241296 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#241297 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#241298 = ADVANCED_FACE('',(#241299),#241324,.F.); +#241299 = FACE_BOUND('',#241300,.F.); +#241300 = EDGE_LOOP('',(#241301,#241302,#241310,#241318)); +#241301 = ORIENTED_EDGE('',*,*,#241280,.T.); +#241302 = ORIENTED_EDGE('',*,*,#241303,.T.); +#241303 = EDGE_CURVE('',#241273,#241304,#241306,.T.); +#241304 = VERTEX_POINT('',#241305); +#241305 = CARTESIAN_POINT('',(136.99,-122.393448,-3.5E-02)); +#241306 = LINE('',#241307,#241308); +#241307 = CARTESIAN_POINT('',(136.99,-122.558578,-3.5E-02)); +#241308 = VECTOR('',#241309,1.); +#241309 = DIRECTION('',(0.,1.,0.)); +#241310 = ORIENTED_EDGE('',*,*,#241311,.F.); +#241311 = EDGE_CURVE('',#241312,#241304,#241314,.T.); +#241312 = VERTEX_POINT('',#241313); +#241313 = CARTESIAN_POINT('',(136.99,-122.393448,0.)); +#241314 = LINE('',#241315,#241316); +#241315 = CARTESIAN_POINT('',(136.99,-122.393448,0.)); +#241316 = VECTOR('',#241317,1.); +#241317 = DIRECTION('',(0.,0.,-1.)); +#241318 = ORIENTED_EDGE('',*,*,#241319,.F.); +#241319 = EDGE_CURVE('',#241281,#241312,#241320,.T.); +#241320 = LINE('',#241321,#241322); +#241321 = CARTESIAN_POINT('',(136.99,-122.558578,0.)); +#241322 = VECTOR('',#241323,1.); +#241323 = DIRECTION('',(0.,1.,0.)); +#241324 = PLANE('',#241325); +#241325 = AXIS2_PLACEMENT_3D('',#241326,#241327,#241328); +#241326 = CARTESIAN_POINT('',(136.99,-122.558578,0.)); +#241327 = DIRECTION('',(1.,-0.,0.)); +#241328 = DIRECTION('',(0.,1.,0.)); +#241329 = ADVANCED_FACE('',(#241330),#241355,.F.); +#241330 = FACE_BOUND('',#241331,.F.); +#241331 = EDGE_LOOP('',(#241332,#241333,#241341,#241349)); +#241332 = ORIENTED_EDGE('',*,*,#241311,.T.); +#241333 = ORIENTED_EDGE('',*,*,#241334,.T.); +#241334 = EDGE_CURVE('',#241304,#241335,#241337,.T.); +#241335 = VERTEX_POINT('',#241336); +#241336 = CARTESIAN_POINT('',(136.960841,-122.393448,-3.5E-02)); +#241337 = LINE('',#241338,#241339); +#241338 = CARTESIAN_POINT('',(136.99,-122.393448,-3.5E-02)); +#241339 = VECTOR('',#241340,1.); +#241340 = DIRECTION('',(-1.,0.,0.)); +#241341 = ORIENTED_EDGE('',*,*,#241342,.F.); +#241342 = EDGE_CURVE('',#241343,#241335,#241345,.T.); +#241343 = VERTEX_POINT('',#241344); +#241344 = CARTESIAN_POINT('',(136.960841,-122.393448,0.)); +#241345 = LINE('',#241346,#241347); +#241346 = CARTESIAN_POINT('',(136.960841,-122.393448,0.)); +#241347 = VECTOR('',#241348,1.); +#241348 = DIRECTION('',(0.,0.,-1.)); +#241349 = ORIENTED_EDGE('',*,*,#241350,.F.); +#241350 = EDGE_CURVE('',#241312,#241343,#241351,.T.); +#241351 = LINE('',#241352,#241353); +#241352 = CARTESIAN_POINT('',(136.99,-122.393448,0.)); +#241353 = VECTOR('',#241354,1.); +#241354 = DIRECTION('',(-1.,0.,0.)); +#241355 = PLANE('',#241356); +#241356 = AXIS2_PLACEMENT_3D('',#241357,#241358,#241359); +#241357 = CARTESIAN_POINT('',(136.99,-122.393448,0.)); +#241358 = DIRECTION('',(0.,1.,0.)); +#241359 = DIRECTION('',(-1.,0.,0.)); +#241360 = ADVANCED_FACE('',(#241361),#241388,.T.); +#241361 = FACE_BOUND('',#241362,.F.); +#241362 = EDGE_LOOP('',(#241363,#241364,#241373,#241381)); +#241363 = ORIENTED_EDGE('',*,*,#241342,.T.); +#241364 = ORIENTED_EDGE('',*,*,#241365,.T.); +#241365 = EDGE_CURVE('',#241335,#241366,#241368,.T.); +#241366 = VERTEX_POINT('',#241367); +#241367 = CARTESIAN_POINT('',(137.238005,-122.278643,-3.5E-02)); +#241368 = CIRCLE('',#241369,0.299999867683); +#241369 = AXIS2_PLACEMENT_3D('',#241370,#241371,#241372); +#241370 = CARTESIAN_POINT('',(136.99999906421,-122.0960147022,-3.5E-02) + ); +#241371 = DIRECTION('',(0.,0.,-1.)); +#241372 = DIRECTION('',(-0.130526938299,-0.99144476315,-0.)); +#241373 = ORIENTED_EDGE('',*,*,#241374,.F.); +#241374 = EDGE_CURVE('',#241375,#241366,#241377,.T.); +#241375 = VERTEX_POINT('',#241376); +#241376 = CARTESIAN_POINT('',(137.238005,-122.278643,0.)); +#241377 = LINE('',#241378,#241379); +#241378 = CARTESIAN_POINT('',(137.238005,-122.278643,0.)); +#241379 = VECTOR('',#241380,1.); +#241380 = DIRECTION('',(0.,0.,-1.)); +#241381 = ORIENTED_EDGE('',*,*,#241382,.F.); +#241382 = EDGE_CURVE('',#241343,#241375,#241383,.T.); +#241383 = CIRCLE('',#241384,0.299999867683); +#241384 = AXIS2_PLACEMENT_3D('',#241385,#241386,#241387); +#241385 = CARTESIAN_POINT('',(136.99999906421,-122.0960147022,0.)); +#241386 = DIRECTION('',(0.,0.,-1.)); +#241387 = DIRECTION('',(-0.130526938299,-0.99144476315,-0.)); +#241388 = CYLINDRICAL_SURFACE('',#241389,0.299999867683); +#241389 = AXIS2_PLACEMENT_3D('',#241390,#241391,#241392); +#241390 = CARTESIAN_POINT('',(136.99999906421,-122.0960147022,0.)); +#241391 = DIRECTION('',(-0.,-0.,1.)); +#241392 = DIRECTION('',(-0.130526938299,-0.99144476315,-0.)); +#241393 = ADVANCED_FACE('',(#241394),#241419,.F.); +#241394 = FACE_BOUND('',#241395,.F.); +#241395 = EDGE_LOOP('',(#241396,#241397,#241405,#241413)); +#241396 = ORIENTED_EDGE('',*,*,#241374,.T.); +#241397 = ORIENTED_EDGE('',*,*,#241398,.T.); +#241398 = EDGE_CURVE('',#241366,#241399,#241401,.T.); +#241399 = VERTEX_POINT('',#241400); +#241400 = CARTESIAN_POINT('',(137.19,-122.326648,-3.5E-02)); +#241401 = LINE('',#241402,#241403); +#241402 = CARTESIAN_POINT('',(137.238005,-122.278643,-3.5E-02)); +#241403 = VECTOR('',#241404,1.); +#241404 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241405 = ORIENTED_EDGE('',*,*,#241406,.F.); +#241406 = EDGE_CURVE('',#241407,#241399,#241409,.T.); +#241407 = VERTEX_POINT('',#241408); +#241408 = CARTESIAN_POINT('',(137.19,-122.326648,0.)); +#241409 = LINE('',#241410,#241411); +#241410 = CARTESIAN_POINT('',(137.19,-122.326648,0.)); +#241411 = VECTOR('',#241412,1.); +#241412 = DIRECTION('',(0.,0.,-1.)); +#241413 = ORIENTED_EDGE('',*,*,#241414,.F.); +#241414 = EDGE_CURVE('',#241375,#241407,#241415,.T.); +#241415 = LINE('',#241416,#241417); +#241416 = CARTESIAN_POINT('',(137.238005,-122.278643,0.)); +#241417 = VECTOR('',#241418,1.); +#241418 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241419 = PLANE('',#241420); +#241420 = AXIS2_PLACEMENT_3D('',#241421,#241422,#241423); +#241421 = CARTESIAN_POINT('',(137.238005,-122.278643,0.)); +#241422 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#241423 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241424 = ADVANCED_FACE('',(#241425),#241450,.F.); +#241425 = FACE_BOUND('',#241426,.F.); +#241426 = EDGE_LOOP('',(#241427,#241428,#241436,#241444)); +#241427 = ORIENTED_EDGE('',*,*,#241406,.T.); +#241428 = ORIENTED_EDGE('',*,*,#241429,.T.); +#241429 = EDGE_CURVE('',#241399,#241430,#241432,.T.); +#241430 = VERTEX_POINT('',#241431); +#241431 = CARTESIAN_POINT('',(137.188079,-122.819509,-3.5E-02)); +#241432 = LINE('',#241433,#241434); +#241433 = CARTESIAN_POINT('',(137.19,-122.326648,-3.5E-02)); +#241434 = VECTOR('',#241435,1.); +#241435 = DIRECTION('',(-3.897621050493E-03,-0.999992404246,0.)); +#241436 = ORIENTED_EDGE('',*,*,#241437,.F.); +#241437 = EDGE_CURVE('',#241438,#241430,#241440,.T.); +#241438 = VERTEX_POINT('',#241439); +#241439 = CARTESIAN_POINT('',(137.188079,-122.819509,0.)); +#241440 = LINE('',#241441,#241442); +#241441 = CARTESIAN_POINT('',(137.188079,-122.819509,0.)); +#241442 = VECTOR('',#241443,1.); +#241443 = DIRECTION('',(0.,0.,-1.)); +#241444 = ORIENTED_EDGE('',*,*,#241445,.F.); +#241445 = EDGE_CURVE('',#241407,#241438,#241446,.T.); +#241446 = LINE('',#241447,#241448); +#241447 = CARTESIAN_POINT('',(137.19,-122.326648,0.)); +#241448 = VECTOR('',#241449,1.); +#241449 = DIRECTION('',(-3.897621050493E-03,-0.999992404246,0.)); +#241450 = PLANE('',#241451); +#241451 = AXIS2_PLACEMENT_3D('',#241452,#241453,#241454); +#241452 = CARTESIAN_POINT('',(137.19,-122.326648,0.)); +#241453 = DIRECTION('',(-0.999992404246,3.897621050493E-03,0.)); +#241454 = DIRECTION('',(-3.897621050493E-03,-0.999992404246,0.)); +#241455 = ADVANCED_FACE('',(#241456),#241483,.T.); +#241456 = FACE_BOUND('',#241457,.F.); +#241457 = EDGE_LOOP('',(#241458,#241459,#241468,#241476)); +#241458 = ORIENTED_EDGE('',*,*,#241437,.T.); +#241459 = ORIENTED_EDGE('',*,*,#241460,.T.); +#241460 = EDGE_CURVE('',#241430,#241461,#241463,.T.); +#241461 = VERTEX_POINT('',#241462); +#241462 = CARTESIAN_POINT('',(137.034443,-122.883147,-3.5E-02)); +#241463 = CIRCLE('',#241464,0.100000590676); +#241464 = AXIS2_PLACEMENT_3D('',#241465,#241466,#241467); +#241465 = CARTESIAN_POINT('',(137.09,-122.7999993128,-3.5E-02)); +#241466 = DIRECTION('',(-0.,0.,-1.)); +#241467 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#241468 = ORIENTED_EDGE('',*,*,#241469,.F.); +#241469 = EDGE_CURVE('',#241470,#241461,#241472,.T.); +#241470 = VERTEX_POINT('',#241471); +#241471 = CARTESIAN_POINT('',(137.034443,-122.883147,0.)); +#241472 = LINE('',#241473,#241474); +#241473 = CARTESIAN_POINT('',(137.034443,-122.883147,0.)); +#241474 = VECTOR('',#241475,1.); +#241475 = DIRECTION('',(0.,0.,-1.)); +#241476 = ORIENTED_EDGE('',*,*,#241477,.F.); +#241477 = EDGE_CURVE('',#241438,#241470,#241478,.T.); +#241478 = CIRCLE('',#241479,0.100000590676); +#241479 = AXIS2_PLACEMENT_3D('',#241480,#241481,#241482); +#241480 = CARTESIAN_POINT('',(137.09,-122.7999993128,0.)); +#241481 = DIRECTION('',(-0.,0.,-1.)); +#241482 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#241483 = CYLINDRICAL_SURFACE('',#241484,0.100000590676); +#241484 = AXIS2_PLACEMENT_3D('',#241485,#241486,#241487); +#241485 = CARTESIAN_POINT('',(137.09,-122.7999993128,0.)); +#241486 = DIRECTION('',(0.,-0.,1.)); +#241487 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#241488 = ADVANCED_FACE('',(#241489),#241514,.F.); +#241489 = FACE_BOUND('',#241490,.F.); +#241490 = EDGE_LOOP('',(#241491,#241492,#241500,#241508)); +#241491 = ORIENTED_EDGE('',*,*,#241469,.T.); +#241492 = ORIENTED_EDGE('',*,*,#241493,.T.); +#241493 = EDGE_CURVE('',#241461,#241494,#241496,.T.); +#241494 = VERTEX_POINT('',#241495); +#241495 = CARTESIAN_POINT('',(135.616853,-121.465557,-3.5E-02)); +#241496 = LINE('',#241497,#241498); +#241497 = CARTESIAN_POINT('',(137.034443,-122.883147,-3.5E-02)); +#241498 = VECTOR('',#241499,1.); +#241499 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241500 = ORIENTED_EDGE('',*,*,#241501,.F.); +#241501 = EDGE_CURVE('',#241502,#241494,#241504,.T.); +#241502 = VERTEX_POINT('',#241503); +#241503 = CARTESIAN_POINT('',(135.616853,-121.465557,0.)); +#241504 = LINE('',#241505,#241506); +#241505 = CARTESIAN_POINT('',(135.616853,-121.465557,0.)); +#241506 = VECTOR('',#241507,1.); +#241507 = DIRECTION('',(0.,0.,-1.)); +#241508 = ORIENTED_EDGE('',*,*,#241509,.F.); +#241509 = EDGE_CURVE('',#241470,#241502,#241510,.T.); +#241510 = LINE('',#241511,#241512); +#241511 = CARTESIAN_POINT('',(137.034443,-122.883147,0.)); +#241512 = VECTOR('',#241513,1.); +#241513 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241514 = PLANE('',#241515); +#241515 = AXIS2_PLACEMENT_3D('',#241516,#241517,#241518); +#241516 = CARTESIAN_POINT('',(137.034443,-122.883147,0.)); +#241517 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#241518 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241519 = ADVANCED_FACE('',(#241520),#241545,.F.); +#241520 = FACE_BOUND('',#241521,.F.); +#241521 = EDGE_LOOP('',(#241522,#241523,#241531,#241539)); +#241522 = ORIENTED_EDGE('',*,*,#241501,.T.); +#241523 = ORIENTED_EDGE('',*,*,#241524,.T.); +#241524 = EDGE_CURVE('',#241494,#241525,#241527,.T.); +#241525 = VERTEX_POINT('',#241526); +#241526 = CARTESIAN_POINT('',(135.601921,-121.429509,-3.5E-02)); +#241527 = LINE('',#241528,#241529); +#241528 = CARTESIAN_POINT('',(135.616853,-121.465557,-3.5E-02)); +#241529 = VECTOR('',#241530,1.); +#241530 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#241531 = ORIENTED_EDGE('',*,*,#241532,.F.); +#241532 = EDGE_CURVE('',#241533,#241525,#241535,.T.); +#241533 = VERTEX_POINT('',#241534); +#241534 = CARTESIAN_POINT('',(135.601921,-121.429509,0.)); +#241535 = LINE('',#241536,#241537); +#241536 = CARTESIAN_POINT('',(135.601921,-121.429509,0.)); +#241537 = VECTOR('',#241538,1.); +#241538 = DIRECTION('',(0.,0.,-1.)); +#241539 = ORIENTED_EDGE('',*,*,#241540,.F.); +#241540 = EDGE_CURVE('',#241502,#241533,#241541,.T.); +#241541 = LINE('',#241542,#241543); +#241542 = CARTESIAN_POINT('',(135.616853,-121.465557,0.)); +#241543 = VECTOR('',#241544,1.); +#241544 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#241545 = PLANE('',#241546); +#241546 = AXIS2_PLACEMENT_3D('',#241547,#241548,#241549); +#241547 = CARTESIAN_POINT('',(135.616853,-121.465557,0.)); +#241548 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#241549 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#241550 = ADVANCED_FACE('',(#241551),#241576,.F.); +#241551 = FACE_BOUND('',#241552,.F.); +#241552 = EDGE_LOOP('',(#241553,#241554,#241562,#241570)); +#241553 = ORIENTED_EDGE('',*,*,#241532,.T.); +#241554 = ORIENTED_EDGE('',*,*,#241555,.T.); +#241555 = EDGE_CURVE('',#241525,#241556,#241558,.T.); +#241556 = VERTEX_POINT('',#241557); +#241557 = CARTESIAN_POINT('',(135.6,-119.925736,-3.5E-02)); +#241558 = LINE('',#241559,#241560); +#241559 = CARTESIAN_POINT('',(135.601921,-121.429509,-3.5E-02)); +#241560 = VECTOR('',#241561,1.); +#241561 = DIRECTION('',(-1.277452403112E-03,0.999999184057,0.)); +#241562 = ORIENTED_EDGE('',*,*,#241563,.F.); +#241563 = EDGE_CURVE('',#241564,#241556,#241566,.T.); +#241564 = VERTEX_POINT('',#241565); +#241565 = CARTESIAN_POINT('',(135.6,-119.925736,0.)); +#241566 = LINE('',#241567,#241568); +#241567 = CARTESIAN_POINT('',(135.6,-119.925736,0.)); +#241568 = VECTOR('',#241569,1.); +#241569 = DIRECTION('',(0.,0.,-1.)); +#241570 = ORIENTED_EDGE('',*,*,#241571,.F.); +#241571 = EDGE_CURVE('',#241533,#241564,#241572,.T.); +#241572 = LINE('',#241573,#241574); +#241573 = CARTESIAN_POINT('',(135.601921,-121.429509,0.)); +#241574 = VECTOR('',#241575,1.); +#241575 = DIRECTION('',(-1.277452403112E-03,0.999999184057,0.)); +#241576 = PLANE('',#241577); +#241577 = AXIS2_PLACEMENT_3D('',#241578,#241579,#241580); +#241578 = CARTESIAN_POINT('',(135.601921,-121.429509,0.)); +#241579 = DIRECTION('',(0.999999184057,1.277452403112E-03,0.)); +#241580 = DIRECTION('',(-1.277452403112E-03,0.999999184057,0.)); +#241581 = ADVANCED_FACE('',(#241582),#241607,.F.); +#241582 = FACE_BOUND('',#241583,.F.); +#241583 = EDGE_LOOP('',(#241584,#241585,#241593,#241601)); +#241584 = ORIENTED_EDGE('',*,*,#241563,.T.); +#241585 = ORIENTED_EDGE('',*,*,#241586,.T.); +#241586 = EDGE_CURVE('',#241556,#241587,#241589,.T.); +#241587 = VERTEX_POINT('',#241588); +#241588 = CARTESIAN_POINT('',(134.774264,-119.1,-3.5E-02)); +#241589 = LINE('',#241590,#241591); +#241590 = CARTESIAN_POINT('',(135.6,-119.925736,-3.5E-02)); +#241591 = VECTOR('',#241592,1.); +#241592 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241593 = ORIENTED_EDGE('',*,*,#241594,.F.); +#241594 = EDGE_CURVE('',#241595,#241587,#241597,.T.); +#241595 = VERTEX_POINT('',#241596); +#241596 = CARTESIAN_POINT('',(134.774264,-119.1,0.)); +#241597 = LINE('',#241598,#241599); +#241598 = CARTESIAN_POINT('',(134.774264,-119.1,0.)); +#241599 = VECTOR('',#241600,1.); +#241600 = DIRECTION('',(0.,0.,-1.)); +#241601 = ORIENTED_EDGE('',*,*,#241602,.F.); +#241602 = EDGE_CURVE('',#241564,#241595,#241603,.T.); +#241603 = LINE('',#241604,#241605); +#241604 = CARTESIAN_POINT('',(135.6,-119.925736,0.)); +#241605 = VECTOR('',#241606,1.); +#241606 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241607 = PLANE('',#241608); +#241608 = AXIS2_PLACEMENT_3D('',#241609,#241610,#241611); +#241609 = CARTESIAN_POINT('',(135.6,-119.925736,0.)); +#241610 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#241611 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241612 = ADVANCED_FACE('',(#241613),#241629,.F.); +#241613 = FACE_BOUND('',#241614,.F.); +#241614 = EDGE_LOOP('',(#241615,#241616,#241622,#241623)); +#241615 = ORIENTED_EDGE('',*,*,#241594,.T.); +#241616 = ORIENTED_EDGE('',*,*,#241617,.T.); +#241617 = EDGE_CURVE('',#241587,#241077,#241618,.T.); +#241618 = LINE('',#241619,#241620); +#241619 = CARTESIAN_POINT('',(134.774264,-119.1,-3.5E-02)); +#241620 = VECTOR('',#241621,1.); +#241621 = DIRECTION('',(-0.999996664647,2.58276865762E-03,0.)); +#241622 = ORIENTED_EDGE('',*,*,#241074,.F.); +#241623 = ORIENTED_EDGE('',*,*,#241624,.F.); +#241624 = EDGE_CURVE('',#241595,#241075,#241625,.T.); +#241625 = LINE('',#241626,#241627); +#241626 = CARTESIAN_POINT('',(134.774264,-119.1,0.)); +#241627 = VECTOR('',#241628,1.); +#241628 = DIRECTION('',(-0.999996664647,2.58276865762E-03,0.)); +#241629 = PLANE('',#241630); +#241630 = AXIS2_PLACEMENT_3D('',#241631,#241632,#241633); +#241631 = CARTESIAN_POINT('',(134.774264,-119.1,0.)); +#241632 = DIRECTION('',(2.58276865762E-03,0.999996664647,0.)); +#241633 = DIRECTION('',(-0.999996664647,2.58276865762E-03,0.)); +#241634 = ADVANCED_FACE('',(#241635),#241662,.F.); +#241635 = FACE_BOUND('',#241636,.F.); +#241636 = EDGE_LOOP('',(#241637,#241647,#241654,#241655)); +#241637 = ORIENTED_EDGE('',*,*,#241638,.T.); +#241638 = EDGE_CURVE('',#241639,#241641,#241643,.T.); +#241639 = VERTEX_POINT('',#241640); +#241640 = CARTESIAN_POINT('',(137.137254,-122.096015,0.)); +#241641 = VERTEX_POINT('',#241642); +#241642 = CARTESIAN_POINT('',(137.137254,-122.096015,-3.5E-02)); +#241643 = LINE('',#241644,#241645); +#241644 = CARTESIAN_POINT('',(137.137254,-122.096015,0.)); +#241645 = VECTOR('',#241646,1.); +#241646 = DIRECTION('',(0.,0.,-1.)); +#241647 = ORIENTED_EDGE('',*,*,#241648,.T.); +#241648 = EDGE_CURVE('',#241641,#241641,#241649,.T.); +#241649 = CIRCLE('',#241650,0.137255); +#241650 = AXIS2_PLACEMENT_3D('',#241651,#241652,#241653); +#241651 = CARTESIAN_POINT('',(136.999999,-122.096015,-3.5E-02)); +#241652 = DIRECTION('',(0.,0.,1.)); +#241653 = DIRECTION('',(1.,0.,-0.)); +#241654 = ORIENTED_EDGE('',*,*,#241638,.F.); +#241655 = ORIENTED_EDGE('',*,*,#241656,.F.); +#241656 = EDGE_CURVE('',#241639,#241639,#241657,.T.); +#241657 = CIRCLE('',#241658,0.137255); +#241658 = AXIS2_PLACEMENT_3D('',#241659,#241660,#241661); +#241659 = CARTESIAN_POINT('',(136.999999,-122.096015,0.)); +#241660 = DIRECTION('',(0.,0.,1.)); +#241661 = DIRECTION('',(1.,0.,-0.)); +#241662 = CYLINDRICAL_SURFACE('',#241663,0.137255); +#241663 = AXIS2_PLACEMENT_3D('',#241664,#241665,#241666); +#241664 = CARTESIAN_POINT('',(136.999999,-122.096015,0.)); +#241665 = DIRECTION('',(0.,0.,1.)); +#241666 = DIRECTION('',(1.,0.,-0.)); +#241667 = ADVANCED_FACE('',(#241668,#241688),#241691,.F.); +#241668 = FACE_BOUND('',#241669,.F.); +#241669 = EDGE_LOOP('',(#241670,#241671,#241672,#241673,#241674,#241675, + #241676,#241677,#241678,#241679,#241680,#241681,#241682,#241683, + #241684,#241685,#241686,#241687)); +#241670 = ORIENTED_EDGE('',*,*,#241101,.T.); +#241671 = ORIENTED_EDGE('',*,*,#241133,.T.); +#241672 = ORIENTED_EDGE('',*,*,#241164,.T.); +#241673 = ORIENTED_EDGE('',*,*,#241195,.T.); +#241674 = ORIENTED_EDGE('',*,*,#241226,.T.); +#241675 = ORIENTED_EDGE('',*,*,#241257,.T.); +#241676 = ORIENTED_EDGE('',*,*,#241288,.T.); +#241677 = ORIENTED_EDGE('',*,*,#241319,.T.); +#241678 = ORIENTED_EDGE('',*,*,#241350,.T.); +#241679 = ORIENTED_EDGE('',*,*,#241382,.T.); +#241680 = ORIENTED_EDGE('',*,*,#241414,.T.); +#241681 = ORIENTED_EDGE('',*,*,#241445,.T.); +#241682 = ORIENTED_EDGE('',*,*,#241477,.T.); +#241683 = ORIENTED_EDGE('',*,*,#241509,.T.); +#241684 = ORIENTED_EDGE('',*,*,#241540,.T.); +#241685 = ORIENTED_EDGE('',*,*,#241571,.T.); +#241686 = ORIENTED_EDGE('',*,*,#241602,.T.); +#241687 = ORIENTED_EDGE('',*,*,#241624,.T.); +#241688 = FACE_BOUND('',#241689,.F.); +#241689 = EDGE_LOOP('',(#241690)); +#241690 = ORIENTED_EDGE('',*,*,#241656,.T.); +#241691 = PLANE('',#241692); +#241692 = AXIS2_PLACEMENT_3D('',#241693,#241694,#241695); +#241693 = CARTESIAN_POINT('',(0.,0.,0.)); +#241694 = DIRECTION('',(-0.,-0.,-1.)); +#241695 = DIRECTION('',(-1.,0.,0.)); +#241696 = ADVANCED_FACE('',(#241697,#241717),#241720,.T.); +#241697 = FACE_BOUND('',#241698,.T.); +#241698 = EDGE_LOOP('',(#241699,#241700,#241701,#241702,#241703,#241704, + #241705,#241706,#241707,#241708,#241709,#241710,#241711,#241712, + #241713,#241714,#241715,#241716)); +#241699 = ORIENTED_EDGE('',*,*,#241084,.T.); +#241700 = ORIENTED_EDGE('',*,*,#241117,.T.); +#241701 = ORIENTED_EDGE('',*,*,#241148,.T.); +#241702 = ORIENTED_EDGE('',*,*,#241179,.T.); +#241703 = ORIENTED_EDGE('',*,*,#241210,.T.); +#241704 = ORIENTED_EDGE('',*,*,#241241,.T.); +#241705 = ORIENTED_EDGE('',*,*,#241272,.T.); +#241706 = ORIENTED_EDGE('',*,*,#241303,.T.); +#241707 = ORIENTED_EDGE('',*,*,#241334,.T.); +#241708 = ORIENTED_EDGE('',*,*,#241365,.T.); +#241709 = ORIENTED_EDGE('',*,*,#241398,.T.); +#241710 = ORIENTED_EDGE('',*,*,#241429,.T.); +#241711 = ORIENTED_EDGE('',*,*,#241460,.T.); +#241712 = ORIENTED_EDGE('',*,*,#241493,.T.); +#241713 = ORIENTED_EDGE('',*,*,#241524,.T.); +#241714 = ORIENTED_EDGE('',*,*,#241555,.T.); +#241715 = ORIENTED_EDGE('',*,*,#241586,.T.); +#241716 = ORIENTED_EDGE('',*,*,#241617,.T.); +#241717 = FACE_BOUND('',#241718,.T.); +#241718 = EDGE_LOOP('',(#241719)); +#241719 = ORIENTED_EDGE('',*,*,#241648,.T.); +#241720 = PLANE('',#241721); +#241721 = AXIS2_PLACEMENT_3D('',#241722,#241723,#241724); +#241722 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#241723 = DIRECTION('',(-0.,-0.,-1.)); +#241724 = DIRECTION('',(-1.,0.,0.)); +#241725 = MANIFOLD_SOLID_BREP('',#241726); +#241726 = CLOSED_SHELL('',(#241727,#241767,#241798,#241829,#241860, + #241891,#241922,#241953,#241984,#242015,#242046,#242077,#242108, + #242139,#242172,#242203,#242236,#242267,#242298,#242329,#242360, + #242391,#242422,#242453,#242484,#242515,#242546,#242577,#242608, + #242639,#242670,#242701,#242732,#242763,#242796,#242818,#242851, + #242884,#242933)); +#241727 = ADVANCED_FACE('',(#241728),#241762,.F.); +#241728 = FACE_BOUND('',#241729,.F.); +#241729 = EDGE_LOOP('',(#241730,#241740,#241748,#241756)); +#241730 = ORIENTED_EDGE('',*,*,#241731,.T.); +#241731 = EDGE_CURVE('',#241732,#241734,#241736,.T.); +#241732 = VERTEX_POINT('',#241733); +#241733 = CARTESIAN_POINT('',(136.680473,-80.202454,0.)); +#241734 = VERTEX_POINT('',#241735); +#241735 = CARTESIAN_POINT('',(136.680473,-80.202454,-3.5E-02)); +#241736 = LINE('',#241737,#241738); +#241737 = CARTESIAN_POINT('',(136.680473,-80.202454,0.)); +#241738 = VECTOR('',#241739,1.); +#241739 = DIRECTION('',(0.,0.,-1.)); +#241740 = ORIENTED_EDGE('',*,*,#241741,.T.); +#241741 = EDGE_CURVE('',#241734,#241742,#241744,.T.); +#241742 = VERTEX_POINT('',#241743); +#241743 = CARTESIAN_POINT('',(136.924198,-80.448897,-3.5E-02)); +#241744 = LINE('',#241745,#241746); +#241745 = CARTESIAN_POINT('',(136.680473,-80.202454,-3.5E-02)); +#241746 = VECTOR('',#241747,1.); +#241747 = DIRECTION('',(0.70317503715,-0.711016784,0.)); +#241748 = ORIENTED_EDGE('',*,*,#241749,.F.); +#241749 = EDGE_CURVE('',#241750,#241742,#241752,.T.); +#241750 = VERTEX_POINT('',#241751); +#241751 = CARTESIAN_POINT('',(136.924198,-80.448897,0.)); +#241752 = LINE('',#241753,#241754); +#241753 = CARTESIAN_POINT('',(136.924198,-80.448897,0.)); +#241754 = VECTOR('',#241755,1.); +#241755 = DIRECTION('',(0.,0.,-1.)); +#241756 = ORIENTED_EDGE('',*,*,#241757,.F.); +#241757 = EDGE_CURVE('',#241732,#241750,#241758,.T.); +#241758 = LINE('',#241759,#241760); +#241759 = CARTESIAN_POINT('',(136.680473,-80.202454,0.)); +#241760 = VECTOR('',#241761,1.); +#241761 = DIRECTION('',(0.70317503715,-0.711016784,0.)); +#241762 = PLANE('',#241763); +#241763 = AXIS2_PLACEMENT_3D('',#241764,#241765,#241766); +#241764 = CARTESIAN_POINT('',(136.680473,-80.202454,0.)); +#241765 = DIRECTION('',(-0.711016784,-0.70317503715,-0.)); +#241766 = DIRECTION('',(0.70317503715,-0.711016784,0.)); +#241767 = ADVANCED_FACE('',(#241768),#241793,.F.); +#241768 = FACE_BOUND('',#241769,.F.); +#241769 = EDGE_LOOP('',(#241770,#241771,#241779,#241787)); +#241770 = ORIENTED_EDGE('',*,*,#241749,.T.); +#241771 = ORIENTED_EDGE('',*,*,#241772,.T.); +#241772 = EDGE_CURVE('',#241742,#241773,#241775,.T.); +#241773 = VERTEX_POINT('',#241774); +#241774 = CARTESIAN_POINT('',(136.93913,-80.484945,-3.5E-02)); +#241775 = LINE('',#241776,#241777); +#241776 = CARTESIAN_POINT('',(136.924198,-80.448897,-3.5E-02)); +#241777 = VECTOR('',#241778,1.); +#241778 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241779 = ORIENTED_EDGE('',*,*,#241780,.F.); +#241780 = EDGE_CURVE('',#241781,#241773,#241783,.T.); +#241781 = VERTEX_POINT('',#241782); +#241782 = CARTESIAN_POINT('',(136.93913,-80.484945,0.)); +#241783 = LINE('',#241784,#241785); +#241784 = CARTESIAN_POINT('',(136.93913,-80.484945,0.)); +#241785 = VECTOR('',#241786,1.); +#241786 = DIRECTION('',(0.,0.,-1.)); +#241787 = ORIENTED_EDGE('',*,*,#241788,.F.); +#241788 = EDGE_CURVE('',#241750,#241781,#241789,.T.); +#241789 = LINE('',#241790,#241791); +#241790 = CARTESIAN_POINT('',(136.924198,-80.448897,0.)); +#241791 = VECTOR('',#241792,1.); +#241792 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241793 = PLANE('',#241794); +#241794 = AXIS2_PLACEMENT_3D('',#241795,#241796,#241797); +#241795 = CARTESIAN_POINT('',(136.924198,-80.448897,0.)); +#241796 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#241797 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#241798 = ADVANCED_FACE('',(#241799),#241824,.F.); +#241799 = FACE_BOUND('',#241800,.F.); +#241800 = EDGE_LOOP('',(#241801,#241802,#241810,#241818)); +#241801 = ORIENTED_EDGE('',*,*,#241780,.T.); +#241802 = ORIENTED_EDGE('',*,*,#241803,.T.); +#241803 = EDGE_CURVE('',#241773,#241804,#241806,.T.); +#241804 = VERTEX_POINT('',#241805); +#241805 = CARTESIAN_POINT('',(136.93913,-81.021021,-3.5E-02)); +#241806 = LINE('',#241807,#241808); +#241807 = CARTESIAN_POINT('',(136.93913,-80.484945,-3.5E-02)); +#241808 = VECTOR('',#241809,1.); +#241809 = DIRECTION('',(0.,-1.,0.)); +#241810 = ORIENTED_EDGE('',*,*,#241811,.F.); +#241811 = EDGE_CURVE('',#241812,#241804,#241814,.T.); +#241812 = VERTEX_POINT('',#241813); +#241813 = CARTESIAN_POINT('',(136.93913,-81.021021,0.)); +#241814 = LINE('',#241815,#241816); +#241815 = CARTESIAN_POINT('',(136.93913,-81.021021,0.)); +#241816 = VECTOR('',#241817,1.); +#241817 = DIRECTION('',(0.,0.,-1.)); +#241818 = ORIENTED_EDGE('',*,*,#241819,.F.); +#241819 = EDGE_CURVE('',#241781,#241812,#241820,.T.); +#241820 = LINE('',#241821,#241822); +#241821 = CARTESIAN_POINT('',(136.93913,-80.484945,0.)); +#241822 = VECTOR('',#241823,1.); +#241823 = DIRECTION('',(0.,-1.,0.)); +#241824 = PLANE('',#241825); +#241825 = AXIS2_PLACEMENT_3D('',#241826,#241827,#241828); +#241826 = CARTESIAN_POINT('',(136.93913,-80.484945,0.)); +#241827 = DIRECTION('',(-1.,-0.,-0.)); +#241828 = DIRECTION('',(0.,-1.,0.)); +#241829 = ADVANCED_FACE('',(#241830),#241855,.F.); +#241830 = FACE_BOUND('',#241831,.F.); +#241831 = EDGE_LOOP('',(#241832,#241833,#241841,#241849)); +#241832 = ORIENTED_EDGE('',*,*,#241811,.T.); +#241833 = ORIENTED_EDGE('',*,*,#241834,.T.); +#241834 = EDGE_CURVE('',#241804,#241835,#241837,.T.); +#241835 = VERTEX_POINT('',#241836); +#241836 = CARTESIAN_POINT('',(136.924198,-81.057069,-3.5E-02)); +#241837 = LINE('',#241838,#241839); +#241838 = CARTESIAN_POINT('',(136.93913,-81.021021,-3.5E-02)); +#241839 = VECTOR('',#241840,1.); +#241840 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#241841 = ORIENTED_EDGE('',*,*,#241842,.F.); +#241842 = EDGE_CURVE('',#241843,#241835,#241845,.T.); +#241843 = VERTEX_POINT('',#241844); +#241844 = CARTESIAN_POINT('',(136.924198,-81.057069,0.)); +#241845 = LINE('',#241846,#241847); +#241846 = CARTESIAN_POINT('',(136.924198,-81.057069,0.)); +#241847 = VECTOR('',#241848,1.); +#241848 = DIRECTION('',(0.,0.,-1.)); +#241849 = ORIENTED_EDGE('',*,*,#241850,.F.); +#241850 = EDGE_CURVE('',#241812,#241843,#241851,.T.); +#241851 = LINE('',#241852,#241853); +#241852 = CARTESIAN_POINT('',(136.93913,-81.021021,0.)); +#241853 = VECTOR('',#241854,1.); +#241854 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#241855 = PLANE('',#241856); +#241856 = AXIS2_PLACEMENT_3D('',#241857,#241858,#241859); +#241857 = CARTESIAN_POINT('',(136.93913,-81.021021,0.)); +#241858 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#241859 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#241860 = ADVANCED_FACE('',(#241861),#241886,.F.); +#241861 = FACE_BOUND('',#241862,.F.); +#241862 = EDGE_LOOP('',(#241863,#241864,#241872,#241880)); +#241863 = ORIENTED_EDGE('',*,*,#241842,.T.); +#241864 = ORIENTED_EDGE('',*,*,#241865,.T.); +#241865 = EDGE_CURVE('',#241835,#241866,#241868,.T.); +#241866 = VERTEX_POINT('',#241867); +#241867 = CARTESIAN_POINT('',(136.545137,-81.43613,-3.5E-02)); +#241868 = LINE('',#241869,#241870); +#241869 = CARTESIAN_POINT('',(136.924198,-81.057069,-3.5E-02)); +#241870 = VECTOR('',#241871,1.); +#241871 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#241872 = ORIENTED_EDGE('',*,*,#241873,.F.); +#241873 = EDGE_CURVE('',#241874,#241866,#241876,.T.); +#241874 = VERTEX_POINT('',#241875); +#241875 = CARTESIAN_POINT('',(136.545137,-81.43613,0.)); +#241876 = LINE('',#241877,#241878); +#241877 = CARTESIAN_POINT('',(136.545137,-81.43613,0.)); +#241878 = VECTOR('',#241879,1.); +#241879 = DIRECTION('',(0.,0.,-1.)); +#241880 = ORIENTED_EDGE('',*,*,#241881,.F.); +#241881 = EDGE_CURVE('',#241843,#241874,#241882,.T.); +#241882 = LINE('',#241883,#241884); +#241883 = CARTESIAN_POINT('',(136.924198,-81.057069,0.)); +#241884 = VECTOR('',#241885,1.); +#241885 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#241886 = PLANE('',#241887); +#241887 = AXIS2_PLACEMENT_3D('',#241888,#241889,#241890); +#241888 = CARTESIAN_POINT('',(136.924198,-81.057069,0.)); +#241889 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#241890 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#241891 = ADVANCED_FACE('',(#241892),#241917,.F.); +#241892 = FACE_BOUND('',#241893,.F.); +#241893 = EDGE_LOOP('',(#241894,#241895,#241903,#241911)); +#241894 = ORIENTED_EDGE('',*,*,#241873,.T.); +#241895 = ORIENTED_EDGE('',*,*,#241896,.T.); +#241896 = EDGE_CURVE('',#241866,#241897,#241899,.T.); +#241897 = VERTEX_POINT('',#241898); +#241898 = CARTESIAN_POINT('',(136.509089,-81.451062,-3.5E-02)); +#241899 = LINE('',#241900,#241901); +#241900 = CARTESIAN_POINT('',(136.545137,-81.43613,-3.5E-02)); +#241901 = VECTOR('',#241902,1.); +#241902 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#241903 = ORIENTED_EDGE('',*,*,#241904,.F.); +#241904 = EDGE_CURVE('',#241905,#241897,#241907,.T.); +#241905 = VERTEX_POINT('',#241906); +#241906 = CARTESIAN_POINT('',(136.509089,-81.451062,0.)); +#241907 = LINE('',#241908,#241909); +#241908 = CARTESIAN_POINT('',(136.509089,-81.451062,0.)); +#241909 = VECTOR('',#241910,1.); +#241910 = DIRECTION('',(0.,0.,-1.)); +#241911 = ORIENTED_EDGE('',*,*,#241912,.F.); +#241912 = EDGE_CURVE('',#241874,#241905,#241913,.T.); +#241913 = LINE('',#241914,#241915); +#241914 = CARTESIAN_POINT('',(136.545137,-81.43613,0.)); +#241915 = VECTOR('',#241916,1.); +#241916 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#241917 = PLANE('',#241918); +#241918 = AXIS2_PLACEMENT_3D('',#241919,#241920,#241921); +#241919 = CARTESIAN_POINT('',(136.545137,-81.43613,0.)); +#241920 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#241921 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#241922 = ADVANCED_FACE('',(#241923),#241948,.F.); +#241923 = FACE_BOUND('',#241924,.F.); +#241924 = EDGE_LOOP('',(#241925,#241926,#241934,#241942)); +#241925 = ORIENTED_EDGE('',*,*,#241904,.T.); +#241926 = ORIENTED_EDGE('',*,*,#241927,.T.); +#241927 = EDGE_CURVE('',#241897,#241928,#241930,.T.); +#241928 = VERTEX_POINT('',#241929); +#241929 = CARTESIAN_POINT('',(136.248158,-81.452983,-3.5E-02)); +#241930 = LINE('',#241931,#241932); +#241931 = CARTESIAN_POINT('',(136.509089,-81.451062,-3.5E-02)); +#241932 = VECTOR('',#241933,1.); +#241933 = DIRECTION('',(-0.999972900847,-7.361900052261E-03,0.)); +#241934 = ORIENTED_EDGE('',*,*,#241935,.F.); +#241935 = EDGE_CURVE('',#241936,#241928,#241938,.T.); +#241936 = VERTEX_POINT('',#241937); +#241937 = CARTESIAN_POINT('',(136.248158,-81.452983,0.)); +#241938 = LINE('',#241939,#241940); +#241939 = CARTESIAN_POINT('',(136.248158,-81.452983,0.)); +#241940 = VECTOR('',#241941,1.); +#241941 = DIRECTION('',(0.,0.,-1.)); +#241942 = ORIENTED_EDGE('',*,*,#241943,.F.); +#241943 = EDGE_CURVE('',#241905,#241936,#241944,.T.); +#241944 = LINE('',#241945,#241946); +#241945 = CARTESIAN_POINT('',(136.509089,-81.451062,0.)); +#241946 = VECTOR('',#241947,1.); +#241947 = DIRECTION('',(-0.999972900847,-7.361900052261E-03,0.)); +#241948 = PLANE('',#241949); +#241949 = AXIS2_PLACEMENT_3D('',#241950,#241951,#241952); +#241950 = CARTESIAN_POINT('',(136.509089,-81.451062,0.)); +#241951 = DIRECTION('',(-7.361900052261E-03,0.999972900847,0.)); +#241952 = DIRECTION('',(-0.999972900847,-7.361900052261E-03,0.)); +#241953 = ADVANCED_FACE('',(#241954),#241979,.F.); +#241954 = FACE_BOUND('',#241955,.F.); +#241955 = EDGE_LOOP('',(#241956,#241957,#241965,#241973)); +#241956 = ORIENTED_EDGE('',*,*,#241935,.T.); +#241957 = ORIENTED_EDGE('',*,*,#241958,.T.); +#241958 = EDGE_CURVE('',#241928,#241959,#241961,.T.); +#241959 = VERTEX_POINT('',#241960); +#241960 = CARTESIAN_POINT('',(136.15,-81.551141,-3.5E-02)); +#241961 = LINE('',#241962,#241963); +#241962 = CARTESIAN_POINT('',(136.248158,-81.452983,-3.5E-02)); +#241963 = VECTOR('',#241964,1.); +#241964 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241965 = ORIENTED_EDGE('',*,*,#241966,.F.); +#241966 = EDGE_CURVE('',#241967,#241959,#241969,.T.); +#241967 = VERTEX_POINT('',#241968); +#241968 = CARTESIAN_POINT('',(136.15,-81.551141,0.)); +#241969 = LINE('',#241970,#241971); +#241970 = CARTESIAN_POINT('',(136.15,-81.551141,0.)); +#241971 = VECTOR('',#241972,1.); +#241972 = DIRECTION('',(0.,0.,-1.)); +#241973 = ORIENTED_EDGE('',*,*,#241974,.F.); +#241974 = EDGE_CURVE('',#241936,#241967,#241975,.T.); +#241975 = LINE('',#241976,#241977); +#241976 = CARTESIAN_POINT('',(136.248158,-81.452983,0.)); +#241977 = VECTOR('',#241978,1.); +#241978 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241979 = PLANE('',#241980); +#241980 = AXIS2_PLACEMENT_3D('',#241981,#241982,#241983); +#241981 = CARTESIAN_POINT('',(136.248158,-81.452983,0.)); +#241982 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#241983 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#241984 = ADVANCED_FACE('',(#241985),#242010,.F.); +#241985 = FACE_BOUND('',#241986,.F.); +#241986 = EDGE_LOOP('',(#241987,#241988,#241996,#242004)); +#241987 = ORIENTED_EDGE('',*,*,#241966,.T.); +#241988 = ORIENTED_EDGE('',*,*,#241989,.T.); +#241989 = EDGE_CURVE('',#241959,#241990,#241992,.T.); +#241990 = VERTEX_POINT('',#241991); +#241991 = CARTESIAN_POINT('',(136.148079,-83.615676,-3.5E-02)); +#241992 = LINE('',#241993,#241994); +#241993 = CARTESIAN_POINT('',(136.15,-81.551141,-3.5E-02)); +#241994 = VECTOR('',#241995,1.); +#241995 = DIRECTION('',(-9.30475467078E-04,-0.999999567108,0.)); +#241996 = ORIENTED_EDGE('',*,*,#241997,.F.); +#241997 = EDGE_CURVE('',#241998,#241990,#242000,.T.); +#241998 = VERTEX_POINT('',#241999); +#241999 = CARTESIAN_POINT('',(136.148079,-83.615676,0.)); +#242000 = LINE('',#242001,#242002); +#242001 = CARTESIAN_POINT('',(136.148079,-83.615676,0.)); +#242002 = VECTOR('',#242003,1.); +#242003 = DIRECTION('',(0.,0.,-1.)); +#242004 = ORIENTED_EDGE('',*,*,#242005,.F.); +#242005 = EDGE_CURVE('',#241967,#241998,#242006,.T.); +#242006 = LINE('',#242007,#242008); +#242007 = CARTESIAN_POINT('',(136.15,-81.551141,0.)); +#242008 = VECTOR('',#242009,1.); +#242009 = DIRECTION('',(-9.30475467078E-04,-0.999999567108,0.)); +#242010 = PLANE('',#242011); +#242011 = AXIS2_PLACEMENT_3D('',#242012,#242013,#242014); +#242012 = CARTESIAN_POINT('',(136.15,-81.551141,0.)); +#242013 = DIRECTION('',(-0.999999567108,9.30475467078E-04,0.)); +#242014 = DIRECTION('',(-9.30475467078E-04,-0.999999567108,0.)); +#242015 = ADVANCED_FACE('',(#242016),#242041,.F.); +#242016 = FACE_BOUND('',#242017,.F.); +#242017 = EDGE_LOOP('',(#242018,#242019,#242027,#242035)); +#242018 = ORIENTED_EDGE('',*,*,#241997,.T.); +#242019 = ORIENTED_EDGE('',*,*,#242020,.T.); +#242020 = EDGE_CURVE('',#241990,#242021,#242023,.T.); +#242021 = VERTEX_POINT('',#242022); +#242022 = CARTESIAN_POINT('',(136.133147,-83.651725,-3.5E-02)); +#242023 = LINE('',#242024,#242025); +#242024 = CARTESIAN_POINT('',(136.148079,-83.615676,-3.5E-02)); +#242025 = VECTOR('',#242026,1.); +#242026 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#242027 = ORIENTED_EDGE('',*,*,#242028,.F.); +#242028 = EDGE_CURVE('',#242029,#242021,#242031,.T.); +#242029 = VERTEX_POINT('',#242030); +#242030 = CARTESIAN_POINT('',(136.133147,-83.651725,0.)); +#242031 = LINE('',#242032,#242033); +#242032 = CARTESIAN_POINT('',(136.133147,-83.651725,0.)); +#242033 = VECTOR('',#242034,1.); +#242034 = DIRECTION('',(0.,0.,-1.)); +#242035 = ORIENTED_EDGE('',*,*,#242036,.F.); +#242036 = EDGE_CURVE('',#241998,#242029,#242037,.T.); +#242037 = LINE('',#242038,#242039); +#242038 = CARTESIAN_POINT('',(136.148079,-83.615676,0.)); +#242039 = VECTOR('',#242040,1.); +#242040 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#242041 = PLANE('',#242042); +#242042 = AXIS2_PLACEMENT_3D('',#242043,#242044,#242045); +#242043 = CARTESIAN_POINT('',(136.148079,-83.615676,0.)); +#242044 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#242045 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#242046 = ADVANCED_FACE('',(#242047),#242072,.F.); +#242047 = FACE_BOUND('',#242048,.F.); +#242048 = EDGE_LOOP('',(#242049,#242050,#242058,#242066)); +#242049 = ORIENTED_EDGE('',*,*,#242028,.T.); +#242050 = ORIENTED_EDGE('',*,*,#242051,.T.); +#242051 = EDGE_CURVE('',#242021,#242052,#242054,.T.); +#242052 = VERTEX_POINT('',#242053); +#242053 = CARTESIAN_POINT('',(133.775,-86.012589,-3.5E-02)); +#242054 = LINE('',#242055,#242056); +#242055 = CARTESIAN_POINT('',(136.133147,-83.651725,-3.5E-02)); +#242056 = VECTOR('',#242057,1.); +#242057 = DIRECTION('',(-0.706699542916,-0.707513785055,0.)); +#242058 = ORIENTED_EDGE('',*,*,#242059,.F.); +#242059 = EDGE_CURVE('',#242060,#242052,#242062,.T.); +#242060 = VERTEX_POINT('',#242061); +#242061 = CARTESIAN_POINT('',(133.775,-86.012589,0.)); +#242062 = LINE('',#242063,#242064); +#242063 = CARTESIAN_POINT('',(133.775,-86.012589,0.)); +#242064 = VECTOR('',#242065,1.); +#242065 = DIRECTION('',(0.,0.,-1.)); +#242066 = ORIENTED_EDGE('',*,*,#242067,.F.); +#242067 = EDGE_CURVE('',#242029,#242060,#242068,.T.); +#242068 = LINE('',#242069,#242070); +#242069 = CARTESIAN_POINT('',(136.133147,-83.651725,0.)); +#242070 = VECTOR('',#242071,1.); +#242071 = DIRECTION('',(-0.706699542916,-0.707513785055,0.)); +#242072 = PLANE('',#242073); +#242073 = AXIS2_PLACEMENT_3D('',#242074,#242075,#242076); +#242074 = CARTESIAN_POINT('',(136.133147,-83.651725,0.)); +#242075 = DIRECTION('',(-0.707513785055,0.706699542916,0.)); +#242076 = DIRECTION('',(-0.706699542916,-0.707513785055,0.)); +#242077 = ADVANCED_FACE('',(#242078),#242103,.F.); +#242078 = FACE_BOUND('',#242079,.F.); +#242079 = EDGE_LOOP('',(#242080,#242081,#242089,#242097)); +#242080 = ORIENTED_EDGE('',*,*,#242059,.T.); +#242081 = ORIENTED_EDGE('',*,*,#242082,.T.); +#242082 = EDGE_CURVE('',#242052,#242083,#242085,.T.); +#242083 = VERTEX_POINT('',#242084); +#242084 = CARTESIAN_POINT('',(133.775,-87.027411,-3.5E-02)); +#242085 = LINE('',#242086,#242087); +#242086 = CARTESIAN_POINT('',(133.775,-86.012589,-3.5E-02)); +#242087 = VECTOR('',#242088,1.); +#242088 = DIRECTION('',(0.,-1.,0.)); +#242089 = ORIENTED_EDGE('',*,*,#242090,.F.); +#242090 = EDGE_CURVE('',#242091,#242083,#242093,.T.); +#242091 = VERTEX_POINT('',#242092); +#242092 = CARTESIAN_POINT('',(133.775,-87.027411,0.)); +#242093 = LINE('',#242094,#242095); +#242094 = CARTESIAN_POINT('',(133.775,-87.027411,0.)); +#242095 = VECTOR('',#242096,1.); +#242096 = DIRECTION('',(0.,0.,-1.)); +#242097 = ORIENTED_EDGE('',*,*,#242098,.F.); +#242098 = EDGE_CURVE('',#242060,#242091,#242099,.T.); +#242099 = LINE('',#242100,#242101); +#242100 = CARTESIAN_POINT('',(133.775,-86.012589,0.)); +#242101 = VECTOR('',#242102,1.); +#242102 = DIRECTION('',(0.,-1.,0.)); +#242103 = PLANE('',#242104); +#242104 = AXIS2_PLACEMENT_3D('',#242105,#242106,#242107); +#242105 = CARTESIAN_POINT('',(133.775,-86.012589,0.)); +#242106 = DIRECTION('',(-1.,-0.,-0.)); +#242107 = DIRECTION('',(0.,-1.,0.)); +#242108 = ADVANCED_FACE('',(#242109),#242134,.F.); +#242109 = FACE_BOUND('',#242110,.F.); +#242110 = EDGE_LOOP('',(#242111,#242112,#242120,#242128)); +#242111 = ORIENTED_EDGE('',*,*,#242090,.T.); +#242112 = ORIENTED_EDGE('',*,*,#242113,.T.); +#242113 = EDGE_CURVE('',#242083,#242114,#242116,.T.); +#242114 = VERTEX_POINT('',#242115); +#242115 = CARTESIAN_POINT('',(136.026477,-89.278888,-3.5E-02)); +#242116 = LINE('',#242117,#242118); +#242117 = CARTESIAN_POINT('',(133.775,-87.027411,-3.5E-02)); +#242118 = VECTOR('',#242119,1.); +#242119 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242120 = ORIENTED_EDGE('',*,*,#242121,.F.); +#242121 = EDGE_CURVE('',#242122,#242114,#242124,.T.); +#242122 = VERTEX_POINT('',#242123); +#242123 = CARTESIAN_POINT('',(136.026477,-89.278888,0.)); +#242124 = LINE('',#242125,#242126); +#242125 = CARTESIAN_POINT('',(136.026477,-89.278888,0.)); +#242126 = VECTOR('',#242127,1.); +#242127 = DIRECTION('',(0.,0.,-1.)); +#242128 = ORIENTED_EDGE('',*,*,#242129,.F.); +#242129 = EDGE_CURVE('',#242091,#242122,#242130,.T.); +#242130 = LINE('',#242131,#242132); +#242131 = CARTESIAN_POINT('',(133.775,-87.027411,0.)); +#242132 = VECTOR('',#242133,1.); +#242133 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242134 = PLANE('',#242135); +#242135 = AXIS2_PLACEMENT_3D('',#242136,#242137,#242138); +#242136 = CARTESIAN_POINT('',(133.775,-87.027411,0.)); +#242137 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#242138 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242139 = ADVANCED_FACE('',(#242140),#242167,.T.); +#242140 = FACE_BOUND('',#242141,.F.); +#242141 = EDGE_LOOP('',(#242142,#242143,#242152,#242160)); +#242142 = ORIENTED_EDGE('',*,*,#242121,.T.); +#242143 = ORIENTED_EDGE('',*,*,#242144,.T.); +#242144 = EDGE_CURVE('',#242114,#242145,#242147,.T.); +#242145 = VERTEX_POINT('',#242146); +#242146 = CARTESIAN_POINT('',(136.185195,-89.122836,-3.5E-02)); +#242147 = CIRCLE('',#242148,0.290828126269); +#242148 = AXIS2_PLACEMENT_3D('',#242149,#242150,#242151); +#242149 = CARTESIAN_POINT('',(136.29421360096,-89.3924578531,-3.5E-02)); +#242150 = DIRECTION('',(0.,0.,-1.)); +#242151 = DIRECTION('',(-0.920600783685,0.390505053846,0.)); +#242152 = ORIENTED_EDGE('',*,*,#242153,.F.); +#242153 = EDGE_CURVE('',#242154,#242145,#242156,.T.); +#242154 = VERTEX_POINT('',#242155); +#242155 = CARTESIAN_POINT('',(136.185195,-89.122836,0.)); +#242156 = LINE('',#242157,#242158); +#242157 = CARTESIAN_POINT('',(136.185195,-89.122836,0.)); +#242158 = VECTOR('',#242159,1.); +#242159 = DIRECTION('',(0.,0.,-1.)); +#242160 = ORIENTED_EDGE('',*,*,#242161,.F.); +#242161 = EDGE_CURVE('',#242122,#242154,#242162,.T.); +#242162 = CIRCLE('',#242163,0.290828126269); +#242163 = AXIS2_PLACEMENT_3D('',#242164,#242165,#242166); +#242164 = CARTESIAN_POINT('',(136.29421360096,-89.3924578531,0.)); +#242165 = DIRECTION('',(0.,0.,-1.)); +#242166 = DIRECTION('',(-0.920600783685,0.390505053846,0.)); +#242167 = CYLINDRICAL_SURFACE('',#242168,0.290828126269); +#242168 = AXIS2_PLACEMENT_3D('',#242169,#242170,#242171); +#242169 = CARTESIAN_POINT('',(136.29421360096,-89.3924578531,0.)); +#242170 = DIRECTION('',(-0.,-0.,1.)); +#242171 = DIRECTION('',(-0.920600783685,0.390505053846,0.)); +#242172 = ADVANCED_FACE('',(#242173),#242198,.F.); +#242173 = FACE_BOUND('',#242174,.F.); +#242174 = EDGE_LOOP('',(#242175,#242176,#242184,#242192)); +#242175 = ORIENTED_EDGE('',*,*,#242153,.T.); +#242176 = ORIENTED_EDGE('',*,*,#242177,.T.); +#242177 = EDGE_CURVE('',#242145,#242178,#242180,.T.); +#242178 = VERTEX_POINT('',#242179); +#242179 = CARTESIAN_POINT('',(136.260842,-89.102567,-3.5E-02)); +#242180 = LINE('',#242181,#242182); +#242181 = CARTESIAN_POINT('',(136.185195,-89.122836,-3.5E-02)); +#242182 = VECTOR('',#242183,1.); +#242183 = DIRECTION('',(0.965927590159,0.258812462159,0.)); +#242184 = ORIENTED_EDGE('',*,*,#242185,.F.); +#242185 = EDGE_CURVE('',#242186,#242178,#242188,.T.); +#242186 = VERTEX_POINT('',#242187); +#242187 = CARTESIAN_POINT('',(136.260842,-89.102567,0.)); +#242188 = LINE('',#242189,#242190); +#242189 = CARTESIAN_POINT('',(136.260842,-89.102567,0.)); +#242190 = VECTOR('',#242191,1.); +#242191 = DIRECTION('',(0.,0.,-1.)); +#242192 = ORIENTED_EDGE('',*,*,#242193,.F.); +#242193 = EDGE_CURVE('',#242154,#242186,#242194,.T.); +#242194 = LINE('',#242195,#242196); +#242195 = CARTESIAN_POINT('',(136.185195,-89.122836,0.)); +#242196 = VECTOR('',#242197,1.); +#242197 = DIRECTION('',(0.965927590159,0.258812462159,0.)); +#242198 = PLANE('',#242199); +#242199 = AXIS2_PLACEMENT_3D('',#242200,#242201,#242202); +#242200 = CARTESIAN_POINT('',(136.185195,-89.122836,0.)); +#242201 = DIRECTION('',(0.258812462159,-0.965927590159,0.)); +#242202 = DIRECTION('',(0.965927590159,0.258812462159,0.)); +#242203 = ADVANCED_FACE('',(#242204),#242231,.T.); +#242204 = FACE_BOUND('',#242205,.F.); +#242205 = EDGE_LOOP('',(#242206,#242207,#242216,#242224)); +#242206 = ORIENTED_EDGE('',*,*,#242185,.T.); +#242207 = ORIENTED_EDGE('',*,*,#242208,.T.); +#242208 = EDGE_CURVE('',#242178,#242209,#242211,.T.); +#242209 = VERTEX_POINT('',#242210); +#242210 = CARTESIAN_POINT('',(136.022836,-89.514805,-3.5E-02)); +#242211 = CIRCLE('',#242212,0.299999963886); +#242212 = AXIS2_PLACEMENT_3D('',#242213,#242214,#242215); +#242213 = CARTESIAN_POINT('',(136.3,-89.40000040324,-3.5E-02)); +#242214 = DIRECTION('',(-0.,0.,-1.)); +#242215 = DIRECTION('',(-0.13052668238,0.991444796843,0.)); +#242216 = ORIENTED_EDGE('',*,*,#242217,.F.); +#242217 = EDGE_CURVE('',#242218,#242209,#242220,.T.); +#242218 = VERTEX_POINT('',#242219); +#242219 = CARTESIAN_POINT('',(136.022836,-89.514805,0.)); +#242220 = LINE('',#242221,#242222); +#242221 = CARTESIAN_POINT('',(136.022836,-89.514805,0.)); +#242222 = VECTOR('',#242223,1.); +#242223 = DIRECTION('',(0.,0.,-1.)); +#242224 = ORIENTED_EDGE('',*,*,#242225,.F.); +#242225 = EDGE_CURVE('',#242186,#242218,#242226,.T.); +#242226 = CIRCLE('',#242227,0.299999963886); +#242227 = AXIS2_PLACEMENT_3D('',#242228,#242229,#242230); +#242228 = CARTESIAN_POINT('',(136.3,-89.40000040324,0.)); +#242229 = DIRECTION('',(-0.,0.,-1.)); +#242230 = DIRECTION('',(-0.13052668238,0.991444796843,0.)); +#242231 = CYLINDRICAL_SURFACE('',#242232,0.299999963886); +#242232 = AXIS2_PLACEMENT_3D('',#242233,#242234,#242235); +#242233 = CARTESIAN_POINT('',(136.3,-89.40000040324,0.)); +#242234 = DIRECTION('',(0.,-0.,1.)); +#242235 = DIRECTION('',(-0.13052668238,0.991444796843,0.)); +#242236 = ADVANCED_FACE('',(#242237),#242262,.F.); +#242237 = FACE_BOUND('',#242238,.F.); +#242238 = EDGE_LOOP('',(#242239,#242240,#242248,#242256)); +#242239 = ORIENTED_EDGE('',*,*,#242217,.T.); +#242240 = ORIENTED_EDGE('',*,*,#242241,.T.); +#242241 = EDGE_CURVE('',#242209,#242242,#242244,.T.); +#242242 = VERTEX_POINT('',#242243); +#242243 = CARTESIAN_POINT('',(136.018869,-89.5,-3.5E-02)); +#242244 = LINE('',#242245,#242246); +#242245 = CARTESIAN_POINT('',(136.022836,-89.514805,-3.5E-02)); +#242246 = VECTOR('',#242247,1.); +#242247 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#242248 = ORIENTED_EDGE('',*,*,#242249,.F.); +#242249 = EDGE_CURVE('',#242250,#242242,#242252,.T.); +#242250 = VERTEX_POINT('',#242251); +#242251 = CARTESIAN_POINT('',(136.018869,-89.5,0.)); +#242252 = LINE('',#242253,#242254); +#242253 = CARTESIAN_POINT('',(136.018869,-89.5,0.)); +#242254 = VECTOR('',#242255,1.); +#242255 = DIRECTION('',(0.,0.,-1.)); +#242256 = ORIENTED_EDGE('',*,*,#242257,.F.); +#242257 = EDGE_CURVE('',#242218,#242250,#242258,.T.); +#242258 = LINE('',#242259,#242260); +#242259 = CARTESIAN_POINT('',(136.022836,-89.514805,0.)); +#242260 = VECTOR('',#242261,1.); +#242261 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#242262 = PLANE('',#242263); +#242263 = AXIS2_PLACEMENT_3D('',#242264,#242265,#242266); +#242264 = CARTESIAN_POINT('',(136.022836,-89.514805,0.)); +#242265 = DIRECTION('',(0.965925627198,0.25881978812,0.)); +#242266 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#242267 = ADVANCED_FACE('',(#242268),#242293,.F.); +#242268 = FACE_BOUND('',#242269,.F.); +#242269 = EDGE_LOOP('',(#242270,#242271,#242279,#242287)); +#242270 = ORIENTED_EDGE('',*,*,#242249,.T.); +#242271 = ORIENTED_EDGE('',*,*,#242272,.T.); +#242272 = EDGE_CURVE('',#242242,#242273,#242275,.T.); +#242273 = VERTEX_POINT('',#242274); +#242274 = CARTESIAN_POINT('',(135.986658,-89.498079,-3.5E-02)); +#242275 = LINE('',#242276,#242277); +#242276 = CARTESIAN_POINT('',(136.018869,-89.5,-3.5E-02)); +#242277 = VECTOR('',#242278,1.); +#242278 = DIRECTION('',(-0.998226383527,5.953223689895E-02,0.)); +#242279 = ORIENTED_EDGE('',*,*,#242280,.F.); +#242280 = EDGE_CURVE('',#242281,#242273,#242283,.T.); +#242281 = VERTEX_POINT('',#242282); +#242282 = CARTESIAN_POINT('',(135.986658,-89.498079,0.)); +#242283 = LINE('',#242284,#242285); +#242284 = CARTESIAN_POINT('',(135.986658,-89.498079,0.)); +#242285 = VECTOR('',#242286,1.); +#242286 = DIRECTION('',(0.,0.,-1.)); +#242287 = ORIENTED_EDGE('',*,*,#242288,.F.); +#242288 = EDGE_CURVE('',#242250,#242281,#242289,.T.); +#242289 = LINE('',#242290,#242291); +#242290 = CARTESIAN_POINT('',(136.018869,-89.5,0.)); +#242291 = VECTOR('',#242292,1.); +#242292 = DIRECTION('',(-0.998226383527,5.953223689895E-02,0.)); +#242293 = PLANE('',#242294); +#242294 = AXIS2_PLACEMENT_3D('',#242295,#242296,#242297); +#242295 = CARTESIAN_POINT('',(136.018869,-89.5,0.)); +#242296 = DIRECTION('',(5.953223689895E-02,0.998226383527,0.)); +#242297 = DIRECTION('',(-0.998226383527,5.953223689895E-02,0.)); +#242298 = ADVANCED_FACE('',(#242299),#242324,.F.); +#242299 = FACE_BOUND('',#242300,.F.); +#242300 = EDGE_LOOP('',(#242301,#242302,#242310,#242318)); +#242301 = ORIENTED_EDGE('',*,*,#242280,.T.); +#242302 = ORIENTED_EDGE('',*,*,#242303,.T.); +#242303 = EDGE_CURVE('',#242273,#242304,#242306,.T.); +#242304 = VERTEX_POINT('',#242305); +#242305 = CARTESIAN_POINT('',(135.95061,-89.483147,-3.5E-02)); +#242306 = LINE('',#242307,#242308); +#242307 = CARTESIAN_POINT('',(135.986658,-89.498079,-3.5E-02)); +#242308 = VECTOR('',#242309,1.); +#242309 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#242310 = ORIENTED_EDGE('',*,*,#242311,.F.); +#242311 = EDGE_CURVE('',#242312,#242304,#242314,.T.); +#242312 = VERTEX_POINT('',#242313); +#242313 = CARTESIAN_POINT('',(135.95061,-89.483147,0.)); +#242314 = LINE('',#242315,#242316); +#242315 = CARTESIAN_POINT('',(135.95061,-89.483147,0.)); +#242316 = VECTOR('',#242317,1.); +#242317 = DIRECTION('',(0.,0.,-1.)); +#242318 = ORIENTED_EDGE('',*,*,#242319,.F.); +#242319 = EDGE_CURVE('',#242281,#242312,#242320,.T.); +#242320 = LINE('',#242321,#242322); +#242321 = CARTESIAN_POINT('',(135.986658,-89.498079,0.)); +#242322 = VECTOR('',#242323,1.); +#242323 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#242324 = PLANE('',#242325); +#242325 = AXIS2_PLACEMENT_3D('',#242326,#242327,#242328); +#242326 = CARTESIAN_POINT('',(135.986658,-89.498079,0.)); +#242327 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242328 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#242329 = ADVANCED_FACE('',(#242330),#242355,.F.); +#242330 = FACE_BOUND('',#242331,.F.); +#242331 = EDGE_LOOP('',(#242332,#242333,#242341,#242349)); +#242332 = ORIENTED_EDGE('',*,*,#242311,.T.); +#242333 = ORIENTED_EDGE('',*,*,#242334,.T.); +#242334 = EDGE_CURVE('',#242304,#242335,#242337,.T.); +#242335 = VERTEX_POINT('',#242336); +#242336 = CARTESIAN_POINT('',(133.591853,-87.12439,-3.5E-02)); +#242337 = LINE('',#242338,#242339); +#242338 = CARTESIAN_POINT('',(135.95061,-89.483147,-3.5E-02)); +#242339 = VECTOR('',#242340,1.); +#242340 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242341 = ORIENTED_EDGE('',*,*,#242342,.F.); +#242342 = EDGE_CURVE('',#242343,#242335,#242345,.T.); +#242343 = VERTEX_POINT('',#242344); +#242344 = CARTESIAN_POINT('',(133.591853,-87.12439,0.)); +#242345 = LINE('',#242346,#242347); +#242346 = CARTESIAN_POINT('',(133.591853,-87.12439,0.)); +#242347 = VECTOR('',#242348,1.); +#242348 = DIRECTION('',(0.,0.,-1.)); +#242349 = ORIENTED_EDGE('',*,*,#242350,.F.); +#242350 = EDGE_CURVE('',#242312,#242343,#242351,.T.); +#242351 = LINE('',#242352,#242353); +#242352 = CARTESIAN_POINT('',(135.95061,-89.483147,0.)); +#242353 = VECTOR('',#242354,1.); +#242354 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242355 = PLANE('',#242356); +#242356 = AXIS2_PLACEMENT_3D('',#242357,#242358,#242359); +#242357 = CARTESIAN_POINT('',(135.95061,-89.483147,0.)); +#242358 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242359 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242360 = ADVANCED_FACE('',(#242361),#242386,.F.); +#242361 = FACE_BOUND('',#242362,.F.); +#242362 = EDGE_LOOP('',(#242363,#242364,#242372,#242380)); +#242363 = ORIENTED_EDGE('',*,*,#242342,.T.); +#242364 = ORIENTED_EDGE('',*,*,#242365,.T.); +#242365 = EDGE_CURVE('',#242335,#242366,#242368,.T.); +#242366 = VERTEX_POINT('',#242367); +#242367 = CARTESIAN_POINT('',(133.576921,-87.088342,-3.5E-02)); +#242368 = LINE('',#242369,#242370); +#242369 = CARTESIAN_POINT('',(133.591853,-87.12439,-3.5E-02)); +#242370 = VECTOR('',#242371,1.); +#242371 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#242372 = ORIENTED_EDGE('',*,*,#242373,.F.); +#242373 = EDGE_CURVE('',#242374,#242366,#242376,.T.); +#242374 = VERTEX_POINT('',#242375); +#242375 = CARTESIAN_POINT('',(133.576921,-87.088342,0.)); +#242376 = LINE('',#242377,#242378); +#242377 = CARTESIAN_POINT('',(133.576921,-87.088342,0.)); +#242378 = VECTOR('',#242379,1.); +#242379 = DIRECTION('',(0.,0.,-1.)); +#242380 = ORIENTED_EDGE('',*,*,#242381,.F.); +#242381 = EDGE_CURVE('',#242343,#242374,#242382,.T.); +#242382 = LINE('',#242383,#242384); +#242383 = CARTESIAN_POINT('',(133.591853,-87.12439,0.)); +#242384 = VECTOR('',#242385,1.); +#242385 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#242386 = PLANE('',#242387); +#242387 = AXIS2_PLACEMENT_3D('',#242388,#242389,#242390); +#242388 = CARTESIAN_POINT('',(133.591853,-87.12439,0.)); +#242389 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#242390 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#242391 = ADVANCED_FACE('',(#242392),#242417,.F.); +#242392 = FACE_BOUND('',#242393,.F.); +#242393 = EDGE_LOOP('',(#242394,#242395,#242403,#242411)); +#242394 = ORIENTED_EDGE('',*,*,#242373,.T.); +#242395 = ORIENTED_EDGE('',*,*,#242396,.T.); +#242396 = EDGE_CURVE('',#242366,#242397,#242399,.T.); +#242397 = VERTEX_POINT('',#242398); +#242398 = CARTESIAN_POINT('',(133.576921,-85.951658,-3.5E-02)); +#242399 = LINE('',#242400,#242401); +#242400 = CARTESIAN_POINT('',(133.576921,-87.088342,-3.5E-02)); +#242401 = VECTOR('',#242402,1.); +#242402 = DIRECTION('',(0.,1.,0.)); +#242403 = ORIENTED_EDGE('',*,*,#242404,.F.); +#242404 = EDGE_CURVE('',#242405,#242397,#242407,.T.); +#242405 = VERTEX_POINT('',#242406); +#242406 = CARTESIAN_POINT('',(133.576921,-85.951658,0.)); +#242407 = LINE('',#242408,#242409); +#242408 = CARTESIAN_POINT('',(133.576921,-85.951658,0.)); +#242409 = VECTOR('',#242410,1.); +#242410 = DIRECTION('',(0.,0.,-1.)); +#242411 = ORIENTED_EDGE('',*,*,#242412,.F.); +#242412 = EDGE_CURVE('',#242374,#242405,#242413,.T.); +#242413 = LINE('',#242414,#242415); +#242414 = CARTESIAN_POINT('',(133.576921,-87.088342,0.)); +#242415 = VECTOR('',#242416,1.); +#242416 = DIRECTION('',(0.,1.,0.)); +#242417 = PLANE('',#242418); +#242418 = AXIS2_PLACEMENT_3D('',#242419,#242420,#242421); +#242419 = CARTESIAN_POINT('',(133.576921,-87.088342,0.)); +#242420 = DIRECTION('',(1.,-0.,0.)); +#242421 = DIRECTION('',(0.,1.,0.)); +#242422 = ADVANCED_FACE('',(#242423),#242448,.F.); +#242423 = FACE_BOUND('',#242424,.F.); +#242424 = EDGE_LOOP('',(#242425,#242426,#242434,#242442)); +#242425 = ORIENTED_EDGE('',*,*,#242404,.T.); +#242426 = ORIENTED_EDGE('',*,*,#242427,.T.); +#242427 = EDGE_CURVE('',#242397,#242428,#242430,.T.); +#242428 = VERTEX_POINT('',#242429); +#242429 = CARTESIAN_POINT('',(133.591853,-85.91561,-3.5E-02)); +#242430 = LINE('',#242431,#242432); +#242431 = CARTESIAN_POINT('',(133.576921,-85.951658,-3.5E-02)); +#242432 = VECTOR('',#242433,1.); +#242433 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242434 = ORIENTED_EDGE('',*,*,#242435,.F.); +#242435 = EDGE_CURVE('',#242436,#242428,#242438,.T.); +#242436 = VERTEX_POINT('',#242437); +#242437 = CARTESIAN_POINT('',(133.591853,-85.91561,0.)); +#242438 = LINE('',#242439,#242440); +#242439 = CARTESIAN_POINT('',(133.591853,-85.91561,0.)); +#242440 = VECTOR('',#242441,1.); +#242441 = DIRECTION('',(0.,0.,-1.)); +#242442 = ORIENTED_EDGE('',*,*,#242443,.F.); +#242443 = EDGE_CURVE('',#242405,#242436,#242444,.T.); +#242444 = LINE('',#242445,#242446); +#242445 = CARTESIAN_POINT('',(133.576921,-85.951658,0.)); +#242446 = VECTOR('',#242447,1.); +#242447 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242448 = PLANE('',#242449); +#242449 = AXIS2_PLACEMENT_3D('',#242450,#242451,#242452); +#242450 = CARTESIAN_POINT('',(133.576921,-85.951658,0.)); +#242451 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#242452 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242453 = ADVANCED_FACE('',(#242454),#242479,.F.); +#242454 = FACE_BOUND('',#242455,.F.); +#242455 = EDGE_LOOP('',(#242456,#242457,#242465,#242473)); +#242456 = ORIENTED_EDGE('',*,*,#242435,.T.); +#242457 = ORIENTED_EDGE('',*,*,#242458,.T.); +#242458 = EDGE_CURVE('',#242428,#242459,#242461,.T.); +#242459 = VERTEX_POINT('',#242460); +#242460 = CARTESIAN_POINT('',(135.95,-83.554745,-3.5E-02)); +#242461 = LINE('',#242462,#242463); +#242462 = CARTESIAN_POINT('',(133.591853,-85.91561,-3.5E-02)); +#242463 = VECTOR('',#242464,1.); +#242464 = DIRECTION('',(0.706699393074,0.707513934725,0.)); +#242465 = ORIENTED_EDGE('',*,*,#242466,.F.); +#242466 = EDGE_CURVE('',#242467,#242459,#242469,.T.); +#242467 = VERTEX_POINT('',#242468); +#242468 = CARTESIAN_POINT('',(135.95,-83.554745,0.)); +#242469 = LINE('',#242470,#242471); +#242470 = CARTESIAN_POINT('',(135.95,-83.554745,0.)); +#242471 = VECTOR('',#242472,1.); +#242472 = DIRECTION('',(0.,0.,-1.)); +#242473 = ORIENTED_EDGE('',*,*,#242474,.F.); +#242474 = EDGE_CURVE('',#242436,#242467,#242475,.T.); +#242475 = LINE('',#242476,#242477); +#242476 = CARTESIAN_POINT('',(133.591853,-85.91561,0.)); +#242477 = VECTOR('',#242478,1.); +#242478 = DIRECTION('',(0.706699393074,0.707513934725,0.)); +#242479 = PLANE('',#242480); +#242480 = AXIS2_PLACEMENT_3D('',#242481,#242482,#242483); +#242481 = CARTESIAN_POINT('',(133.591853,-85.91561,0.)); +#242482 = DIRECTION('',(0.707513934725,-0.706699393074,0.)); +#242483 = DIRECTION('',(0.706699393074,0.707513934725,0.)); +#242484 = ADVANCED_FACE('',(#242485),#242510,.F.); +#242485 = FACE_BOUND('',#242486,.F.); +#242486 = EDGE_LOOP('',(#242487,#242488,#242496,#242504)); +#242487 = ORIENTED_EDGE('',*,*,#242466,.T.); +#242488 = ORIENTED_EDGE('',*,*,#242489,.T.); +#242489 = EDGE_CURVE('',#242459,#242490,#242492,.T.); +#242490 = VERTEX_POINT('',#242491); +#242491 = CARTESIAN_POINT('',(135.951921,-81.490211,-3.5E-02)); +#242492 = LINE('',#242493,#242494); +#242493 = CARTESIAN_POINT('',(135.95,-83.554745,-3.5E-02)); +#242494 = VECTOR('',#242495,1.); +#242495 = DIRECTION('',(9.304759177727E-04,0.999999567107,0.)); +#242496 = ORIENTED_EDGE('',*,*,#242497,.F.); +#242497 = EDGE_CURVE('',#242498,#242490,#242500,.T.); +#242498 = VERTEX_POINT('',#242499); +#242499 = CARTESIAN_POINT('',(135.951921,-81.490211,0.)); +#242500 = LINE('',#242501,#242502); +#242501 = CARTESIAN_POINT('',(135.951921,-81.490211,0.)); +#242502 = VECTOR('',#242503,1.); +#242503 = DIRECTION('',(0.,0.,-1.)); +#242504 = ORIENTED_EDGE('',*,*,#242505,.F.); +#242505 = EDGE_CURVE('',#242467,#242498,#242506,.T.); +#242506 = LINE('',#242507,#242508); +#242507 = CARTESIAN_POINT('',(135.95,-83.554745,0.)); +#242508 = VECTOR('',#242509,1.); +#242509 = DIRECTION('',(9.304759177727E-04,0.999999567107,0.)); +#242510 = PLANE('',#242511); +#242511 = AXIS2_PLACEMENT_3D('',#242512,#242513,#242514); +#242512 = CARTESIAN_POINT('',(135.95,-83.554745,0.)); +#242513 = DIRECTION('',(0.999999567107,-9.304759177727E-04,0.)); +#242514 = DIRECTION('',(9.304759177727E-04,0.999999567107,0.)); +#242515 = ADVANCED_FACE('',(#242516),#242541,.F.); +#242516 = FACE_BOUND('',#242517,.F.); +#242517 = EDGE_LOOP('',(#242518,#242519,#242527,#242535)); +#242518 = ORIENTED_EDGE('',*,*,#242497,.T.); +#242519 = ORIENTED_EDGE('',*,*,#242520,.T.); +#242520 = EDGE_CURVE('',#242490,#242521,#242523,.T.); +#242521 = VERTEX_POINT('',#242522); +#242522 = CARTESIAN_POINT('',(135.966853,-81.454163,-3.5E-02)); +#242523 = LINE('',#242524,#242525); +#242524 = CARTESIAN_POINT('',(135.951921,-81.490211,-3.5E-02)); +#242525 = VECTOR('',#242526,1.); +#242526 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242527 = ORIENTED_EDGE('',*,*,#242528,.F.); +#242528 = EDGE_CURVE('',#242529,#242521,#242531,.T.); +#242529 = VERTEX_POINT('',#242530); +#242530 = CARTESIAN_POINT('',(135.966853,-81.454163,0.)); +#242531 = LINE('',#242532,#242533); +#242532 = CARTESIAN_POINT('',(135.966853,-81.454163,0.)); +#242533 = VECTOR('',#242534,1.); +#242534 = DIRECTION('',(0.,0.,-1.)); +#242535 = ORIENTED_EDGE('',*,*,#242536,.F.); +#242536 = EDGE_CURVE('',#242498,#242529,#242537,.T.); +#242537 = LINE('',#242538,#242539); +#242538 = CARTESIAN_POINT('',(135.951921,-81.490211,0.)); +#242539 = VECTOR('',#242540,1.); +#242540 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242541 = PLANE('',#242542); +#242542 = AXIS2_PLACEMENT_3D('',#242543,#242544,#242545); +#242543 = CARTESIAN_POINT('',(135.951921,-81.490211,0.)); +#242544 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#242545 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#242546 = ADVANCED_FACE('',(#242547),#242572,.F.); +#242547 = FACE_BOUND('',#242548,.F.); +#242548 = EDGE_LOOP('',(#242549,#242550,#242558,#242566)); +#242549 = ORIENTED_EDGE('',*,*,#242528,.T.); +#242550 = ORIENTED_EDGE('',*,*,#242551,.T.); +#242551 = EDGE_CURVE('',#242521,#242552,#242554,.T.); +#242552 = VERTEX_POINT('',#242553); +#242553 = CARTESIAN_POINT('',(136.15118,-81.269835,-3.5E-02)); +#242554 = LINE('',#242555,#242556); +#242555 = CARTESIAN_POINT('',(135.966853,-81.454163,-3.5E-02)); +#242556 = VECTOR('',#242557,1.); +#242557 = DIRECTION('',(0.707104863112,0.707108699256,0.)); +#242558 = ORIENTED_EDGE('',*,*,#242559,.F.); +#242559 = EDGE_CURVE('',#242560,#242552,#242562,.T.); +#242560 = VERTEX_POINT('',#242561); +#242561 = CARTESIAN_POINT('',(136.15118,-81.269835,0.)); +#242562 = LINE('',#242563,#242564); +#242563 = CARTESIAN_POINT('',(136.15118,-81.269835,0.)); +#242564 = VECTOR('',#242565,1.); +#242565 = DIRECTION('',(0.,0.,-1.)); +#242566 = ORIENTED_EDGE('',*,*,#242567,.F.); +#242567 = EDGE_CURVE('',#242529,#242560,#242568,.T.); +#242568 = LINE('',#242569,#242570); +#242569 = CARTESIAN_POINT('',(135.966853,-81.454163,0.)); +#242570 = VECTOR('',#242571,1.); +#242571 = DIRECTION('',(0.707104863112,0.707108699256,0.)); +#242572 = PLANE('',#242573); +#242573 = AXIS2_PLACEMENT_3D('',#242574,#242575,#242576); +#242574 = CARTESIAN_POINT('',(135.966853,-81.454163,0.)); +#242575 = DIRECTION('',(0.707108699256,-0.707104863112,0.)); +#242576 = DIRECTION('',(0.707104863112,0.707108699256,0.)); +#242577 = ADVANCED_FACE('',(#242578),#242603,.F.); +#242578 = FACE_BOUND('',#242579,.F.); +#242579 = EDGE_LOOP('',(#242580,#242581,#242589,#242597)); +#242580 = ORIENTED_EDGE('',*,*,#242559,.T.); +#242581 = ORIENTED_EDGE('',*,*,#242582,.T.); +#242582 = EDGE_CURVE('',#242552,#242583,#242585,.T.); +#242583 = VERTEX_POINT('',#242584); +#242584 = CARTESIAN_POINT('',(136.187228,-81.254904,-3.5E-02)); +#242585 = LINE('',#242586,#242587); +#242586 = CARTESIAN_POINT('',(136.15118,-81.269835,-3.5E-02)); +#242587 = VECTOR('',#242588,1.); +#242588 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#242589 = ORIENTED_EDGE('',*,*,#242590,.F.); +#242590 = EDGE_CURVE('',#242591,#242583,#242593,.T.); +#242591 = VERTEX_POINT('',#242592); +#242592 = CARTESIAN_POINT('',(136.187228,-81.254904,0.)); +#242593 = LINE('',#242594,#242595); +#242594 = CARTESIAN_POINT('',(136.187228,-81.254904,0.)); +#242595 = VECTOR('',#242596,1.); +#242596 = DIRECTION('',(0.,0.,-1.)); +#242597 = ORIENTED_EDGE('',*,*,#242598,.F.); +#242598 = EDGE_CURVE('',#242560,#242591,#242599,.T.); +#242599 = LINE('',#242600,#242601); +#242600 = CARTESIAN_POINT('',(136.15118,-81.269835,0.)); +#242601 = VECTOR('',#242602,1.); +#242602 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#242603 = PLANE('',#242604); +#242604 = AXIS2_PLACEMENT_3D('',#242605,#242606,#242607); +#242605 = CARTESIAN_POINT('',(136.15118,-81.269835,0.)); +#242606 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#242607 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#242608 = ADVANCED_FACE('',(#242609),#242634,.F.); +#242609 = FACE_BOUND('',#242610,.F.); +#242610 = EDGE_LOOP('',(#242611,#242612,#242620,#242628)); +#242611 = ORIENTED_EDGE('',*,*,#242590,.T.); +#242612 = ORIENTED_EDGE('',*,*,#242613,.T.); +#242613 = EDGE_CURVE('',#242583,#242614,#242616,.T.); +#242614 = VERTEX_POINT('',#242615); +#242615 = CARTESIAN_POINT('',(136.448158,-81.252983,-3.5E-02)); +#242616 = LINE('',#242617,#242618); +#242617 = CARTESIAN_POINT('',(136.187228,-81.254904,-3.5E-02)); +#242618 = VECTOR('',#242619,1.); +#242619 = DIRECTION('',(0.999972900639,7.361928264758E-03,0.)); +#242620 = ORIENTED_EDGE('',*,*,#242621,.F.); +#242621 = EDGE_CURVE('',#242622,#242614,#242624,.T.); +#242622 = VERTEX_POINT('',#242623); +#242623 = CARTESIAN_POINT('',(136.448158,-81.252983,0.)); +#242624 = LINE('',#242625,#242626); +#242625 = CARTESIAN_POINT('',(136.448158,-81.252983,0.)); +#242626 = VECTOR('',#242627,1.); +#242627 = DIRECTION('',(0.,0.,-1.)); +#242628 = ORIENTED_EDGE('',*,*,#242629,.F.); +#242629 = EDGE_CURVE('',#242591,#242622,#242630,.T.); +#242630 = LINE('',#242631,#242632); +#242631 = CARTESIAN_POINT('',(136.187228,-81.254904,0.)); +#242632 = VECTOR('',#242633,1.); +#242633 = DIRECTION('',(0.999972900639,7.361928264758E-03,0.)); +#242634 = PLANE('',#242635); +#242635 = AXIS2_PLACEMENT_3D('',#242636,#242637,#242638); +#242636 = CARTESIAN_POINT('',(136.187228,-81.254904,0.)); +#242637 = DIRECTION('',(7.361928264758E-03,-0.999972900639,0.)); +#242638 = DIRECTION('',(0.999972900639,7.361928264758E-03,0.)); +#242639 = ADVANCED_FACE('',(#242640),#242665,.F.); +#242640 = FACE_BOUND('',#242641,.F.); +#242641 = EDGE_LOOP('',(#242642,#242643,#242651,#242659)); +#242642 = ORIENTED_EDGE('',*,*,#242621,.T.); +#242643 = ORIENTED_EDGE('',*,*,#242644,.T.); +#242644 = EDGE_CURVE('',#242614,#242645,#242647,.T.); +#242645 = VERTEX_POINT('',#242646); +#242646 = CARTESIAN_POINT('',(136.741051,-80.96009,-3.5E-02)); +#242647 = LINE('',#242648,#242649); +#242648 = CARTESIAN_POINT('',(136.448158,-81.252983,-3.5E-02)); +#242649 = VECTOR('',#242650,1.); +#242650 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242651 = ORIENTED_EDGE('',*,*,#242652,.F.); +#242652 = EDGE_CURVE('',#242653,#242645,#242655,.T.); +#242653 = VERTEX_POINT('',#242654); +#242654 = CARTESIAN_POINT('',(136.741051,-80.96009,0.)); +#242655 = LINE('',#242656,#242657); +#242656 = CARTESIAN_POINT('',(136.741051,-80.96009,0.)); +#242657 = VECTOR('',#242658,1.); +#242658 = DIRECTION('',(0.,0.,-1.)); +#242659 = ORIENTED_EDGE('',*,*,#242660,.F.); +#242660 = EDGE_CURVE('',#242622,#242653,#242661,.T.); +#242661 = LINE('',#242662,#242663); +#242662 = CARTESIAN_POINT('',(136.448158,-81.252983,0.)); +#242663 = VECTOR('',#242664,1.); +#242664 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242665 = PLANE('',#242666); +#242666 = AXIS2_PLACEMENT_3D('',#242667,#242668,#242669); +#242667 = CARTESIAN_POINT('',(136.448158,-81.252983,0.)); +#242668 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#242669 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242670 = ADVANCED_FACE('',(#242671),#242696,.F.); +#242671 = FACE_BOUND('',#242672,.F.); +#242672 = EDGE_LOOP('',(#242673,#242674,#242682,#242690)); +#242673 = ORIENTED_EDGE('',*,*,#242652,.T.); +#242674 = ORIENTED_EDGE('',*,*,#242675,.T.); +#242675 = EDGE_CURVE('',#242645,#242676,#242678,.T.); +#242676 = VERTEX_POINT('',#242677); +#242677 = CARTESIAN_POINT('',(136.741051,-80.545876,-3.5E-02)); +#242678 = LINE('',#242679,#242680); +#242679 = CARTESIAN_POINT('',(136.741051,-80.96009,-3.5E-02)); +#242680 = VECTOR('',#242681,1.); +#242681 = DIRECTION('',(0.,1.,0.)); +#242682 = ORIENTED_EDGE('',*,*,#242683,.F.); +#242683 = EDGE_CURVE('',#242684,#242676,#242686,.T.); +#242684 = VERTEX_POINT('',#242685); +#242685 = CARTESIAN_POINT('',(136.741051,-80.545876,0.)); +#242686 = LINE('',#242687,#242688); +#242687 = CARTESIAN_POINT('',(136.741051,-80.545876,0.)); +#242688 = VECTOR('',#242689,1.); +#242689 = DIRECTION('',(0.,0.,-1.)); +#242690 = ORIENTED_EDGE('',*,*,#242691,.F.); +#242691 = EDGE_CURVE('',#242653,#242684,#242692,.T.); +#242692 = LINE('',#242693,#242694); +#242693 = CARTESIAN_POINT('',(136.741051,-80.96009,0.)); +#242694 = VECTOR('',#242695,1.); +#242695 = DIRECTION('',(0.,1.,0.)); +#242696 = PLANE('',#242697); +#242697 = AXIS2_PLACEMENT_3D('',#242698,#242699,#242700); +#242698 = CARTESIAN_POINT('',(136.741051,-80.96009,0.)); +#242699 = DIRECTION('',(1.,-0.,0.)); +#242700 = DIRECTION('',(0.,1.,0.)); +#242701 = ADVANCED_FACE('',(#242702),#242727,.F.); +#242702 = FACE_BOUND('',#242703,.F.); +#242703 = EDGE_LOOP('',(#242704,#242705,#242713,#242721)); +#242704 = ORIENTED_EDGE('',*,*,#242683,.T.); +#242705 = ORIENTED_EDGE('',*,*,#242706,.T.); +#242706 = EDGE_CURVE('',#242676,#242707,#242709,.T.); +#242707 = VERTEX_POINT('',#242708); +#242708 = CARTESIAN_POINT('',(136.551279,-80.356104,-3.5E-02)); +#242709 = LINE('',#242710,#242711); +#242710 = CARTESIAN_POINT('',(136.741051,-80.545876,-3.5E-02)); +#242711 = VECTOR('',#242712,1.); +#242712 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242713 = ORIENTED_EDGE('',*,*,#242714,.F.); +#242714 = EDGE_CURVE('',#242715,#242707,#242717,.T.); +#242715 = VERTEX_POINT('',#242716); +#242716 = CARTESIAN_POINT('',(136.551279,-80.356104,0.)); +#242717 = LINE('',#242718,#242719); +#242718 = CARTESIAN_POINT('',(136.551279,-80.356104,0.)); +#242719 = VECTOR('',#242720,1.); +#242720 = DIRECTION('',(0.,0.,-1.)); +#242721 = ORIENTED_EDGE('',*,*,#242722,.F.); +#242722 = EDGE_CURVE('',#242684,#242715,#242723,.T.); +#242723 = LINE('',#242724,#242725); +#242724 = CARTESIAN_POINT('',(136.741051,-80.545876,0.)); +#242725 = VECTOR('',#242726,1.); +#242726 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242727 = PLANE('',#242728); +#242728 = AXIS2_PLACEMENT_3D('',#242729,#242730,#242731); +#242729 = CARTESIAN_POINT('',(136.741051,-80.545876,0.)); +#242730 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#242731 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#242732 = ADVANCED_FACE('',(#242733),#242758,.F.); +#242733 = FACE_BOUND('',#242734,.F.); +#242734 = EDGE_LOOP('',(#242735,#242736,#242744,#242752)); +#242735 = ORIENTED_EDGE('',*,*,#242714,.T.); +#242736 = ORIENTED_EDGE('',*,*,#242737,.T.); +#242737 = EDGE_CURVE('',#242707,#242738,#242740,.T.); +#242738 = VERTEX_POINT('',#242739); +#242739 = CARTESIAN_POINT('',(136.514805,-80.377164,-3.5E-02)); +#242740 = LINE('',#242741,#242742); +#242741 = CARTESIAN_POINT('',(136.551279,-80.356104,-3.5E-02)); +#242742 = VECTOR('',#242743,1.); +#242743 = DIRECTION('',(-0.86600765519,-0.500030740207,0.)); +#242744 = ORIENTED_EDGE('',*,*,#242745,.F.); +#242745 = EDGE_CURVE('',#242746,#242738,#242748,.T.); +#242746 = VERTEX_POINT('',#242747); +#242747 = CARTESIAN_POINT('',(136.514805,-80.377164,0.)); +#242748 = LINE('',#242749,#242750); +#242749 = CARTESIAN_POINT('',(136.514805,-80.377164,0.)); +#242750 = VECTOR('',#242751,1.); +#242751 = DIRECTION('',(0.,0.,-1.)); +#242752 = ORIENTED_EDGE('',*,*,#242753,.F.); +#242753 = EDGE_CURVE('',#242715,#242746,#242754,.T.); +#242754 = LINE('',#242755,#242756); +#242755 = CARTESIAN_POINT('',(136.551279,-80.356104,0.)); +#242756 = VECTOR('',#242757,1.); +#242757 = DIRECTION('',(-0.86600765519,-0.500030740207,0.)); +#242758 = PLANE('',#242759); +#242759 = AXIS2_PLACEMENT_3D('',#242760,#242761,#242762); +#242760 = CARTESIAN_POINT('',(136.551279,-80.356104,0.)); +#242761 = DIRECTION('',(-0.500030740207,0.86600765519,0.)); +#242762 = DIRECTION('',(-0.86600765519,-0.500030740207,0.)); +#242763 = ADVANCED_FACE('',(#242764),#242791,.T.); +#242764 = FACE_BOUND('',#242765,.F.); +#242765 = EDGE_LOOP('',(#242766,#242767,#242776,#242784)); +#242766 = ORIENTED_EDGE('',*,*,#242745,.T.); +#242767 = ORIENTED_EDGE('',*,*,#242768,.T.); +#242768 = EDGE_CURVE('',#242738,#242769,#242771,.T.); +#242769 = VERTEX_POINT('',#242770); +#242770 = CARTESIAN_POINT('',(136.697433,-80.139158,-3.5E-02)); +#242771 = CIRCLE('',#242772,0.299999712563); +#242772 = AXIS2_PLACEMENT_3D('',#242773,#242774,#242775); +#242773 = CARTESIAN_POINT('',(136.39999978046,-80.10000052999,-3.5E-02) + ); +#242774 = DIRECTION('',(0.,0.,-1.)); +#242775 = DIRECTION('',(0.382684431761,-0.923879118547,0.)); +#242776 = ORIENTED_EDGE('',*,*,#242777,.F.); +#242777 = EDGE_CURVE('',#242778,#242769,#242780,.T.); +#242778 = VERTEX_POINT('',#242779); +#242779 = CARTESIAN_POINT('',(136.697433,-80.139158,0.)); +#242780 = LINE('',#242781,#242782); +#242781 = CARTESIAN_POINT('',(136.697433,-80.139158,0.)); +#242782 = VECTOR('',#242783,1.); +#242783 = DIRECTION('',(0.,0.,-1.)); +#242784 = ORIENTED_EDGE('',*,*,#242785,.F.); +#242785 = EDGE_CURVE('',#242746,#242778,#242786,.T.); +#242786 = CIRCLE('',#242787,0.299999712563); +#242787 = AXIS2_PLACEMENT_3D('',#242788,#242789,#242790); +#242788 = CARTESIAN_POINT('',(136.39999978046,-80.10000052999,0.)); +#242789 = DIRECTION('',(0.,0.,-1.)); +#242790 = DIRECTION('',(0.382684431761,-0.923879118547,0.)); +#242791 = CYLINDRICAL_SURFACE('',#242792,0.299999712563); +#242792 = AXIS2_PLACEMENT_3D('',#242793,#242794,#242795); +#242793 = CARTESIAN_POINT('',(136.39999978046,-80.10000052999,0.)); +#242794 = DIRECTION('',(-0.,-0.,1.)); +#242795 = DIRECTION('',(0.382684431761,-0.923879118547,0.)); +#242796 = ADVANCED_FACE('',(#242797),#242813,.F.); +#242797 = FACE_BOUND('',#242798,.F.); +#242798 = EDGE_LOOP('',(#242799,#242800,#242806,#242807)); +#242799 = ORIENTED_EDGE('',*,*,#242777,.T.); +#242800 = ORIENTED_EDGE('',*,*,#242801,.T.); +#242801 = EDGE_CURVE('',#242769,#241734,#242802,.T.); +#242802 = LINE('',#242803,#242804); +#242803 = CARTESIAN_POINT('',(136.697433,-80.139158,-3.5E-02)); +#242804 = VECTOR('',#242805,1.); +#242805 = DIRECTION('',(-0.258817449225,-0.965926253902,0.)); +#242806 = ORIENTED_EDGE('',*,*,#241731,.F.); +#242807 = ORIENTED_EDGE('',*,*,#242808,.F.); +#242808 = EDGE_CURVE('',#242778,#241732,#242809,.T.); +#242809 = LINE('',#242810,#242811); +#242810 = CARTESIAN_POINT('',(136.697433,-80.139158,0.)); +#242811 = VECTOR('',#242812,1.); +#242812 = DIRECTION('',(-0.258817449225,-0.965926253902,0.)); +#242813 = PLANE('',#242814); +#242814 = AXIS2_PLACEMENT_3D('',#242815,#242816,#242817); +#242815 = CARTESIAN_POINT('',(136.697433,-80.139158,0.)); +#242816 = DIRECTION('',(-0.965926253902,0.258817449225,0.)); +#242817 = DIRECTION('',(-0.258817449225,-0.965926253902,0.)); +#242818 = ADVANCED_FACE('',(#242819),#242846,.F.); +#242819 = FACE_BOUND('',#242820,.F.); +#242820 = EDGE_LOOP('',(#242821,#242831,#242838,#242839)); +#242821 = ORIENTED_EDGE('',*,*,#242822,.T.); +#242822 = EDGE_CURVE('',#242823,#242825,#242827,.T.); +#242823 = VERTEX_POINT('',#242824); +#242824 = CARTESIAN_POINT('',(136.437255,-89.4,0.)); +#242825 = VERTEX_POINT('',#242826); +#242826 = CARTESIAN_POINT('',(136.437255,-89.4,-3.5E-02)); +#242827 = LINE('',#242828,#242829); +#242828 = CARTESIAN_POINT('',(136.437255,-89.4,0.)); +#242829 = VECTOR('',#242830,1.); +#242830 = DIRECTION('',(0.,0.,-1.)); +#242831 = ORIENTED_EDGE('',*,*,#242832,.T.); +#242832 = EDGE_CURVE('',#242825,#242825,#242833,.T.); +#242833 = CIRCLE('',#242834,0.137255); +#242834 = AXIS2_PLACEMENT_3D('',#242835,#242836,#242837); +#242835 = CARTESIAN_POINT('',(136.3,-89.4,-3.5E-02)); +#242836 = DIRECTION('',(0.,0.,1.)); +#242837 = DIRECTION('',(1.,0.,-0.)); +#242838 = ORIENTED_EDGE('',*,*,#242822,.F.); +#242839 = ORIENTED_EDGE('',*,*,#242840,.F.); +#242840 = EDGE_CURVE('',#242823,#242823,#242841,.T.); +#242841 = CIRCLE('',#242842,0.137255); +#242842 = AXIS2_PLACEMENT_3D('',#242843,#242844,#242845); +#242843 = CARTESIAN_POINT('',(136.3,-89.4,0.)); +#242844 = DIRECTION('',(0.,0.,1.)); +#242845 = DIRECTION('',(1.,0.,-0.)); +#242846 = CYLINDRICAL_SURFACE('',#242847,0.137255); +#242847 = AXIS2_PLACEMENT_3D('',#242848,#242849,#242850); +#242848 = CARTESIAN_POINT('',(136.3,-89.4,0.)); +#242849 = DIRECTION('',(0.,0.,1.)); +#242850 = DIRECTION('',(1.,0.,-0.)); +#242851 = ADVANCED_FACE('',(#242852),#242879,.F.); +#242852 = FACE_BOUND('',#242853,.F.); +#242853 = EDGE_LOOP('',(#242854,#242864,#242871,#242872)); +#242854 = ORIENTED_EDGE('',*,*,#242855,.T.); +#242855 = EDGE_CURVE('',#242856,#242858,#242860,.T.); +#242856 = VERTEX_POINT('',#242857); +#242857 = CARTESIAN_POINT('',(136.537255,-80.1,0.)); +#242858 = VERTEX_POINT('',#242859); +#242859 = CARTESIAN_POINT('',(136.537255,-80.1,-3.5E-02)); +#242860 = LINE('',#242861,#242862); +#242861 = CARTESIAN_POINT('',(136.537255,-80.1,0.)); +#242862 = VECTOR('',#242863,1.); +#242863 = DIRECTION('',(0.,0.,-1.)); +#242864 = ORIENTED_EDGE('',*,*,#242865,.T.); +#242865 = EDGE_CURVE('',#242858,#242858,#242866,.T.); +#242866 = CIRCLE('',#242867,0.137255); +#242867 = AXIS2_PLACEMENT_3D('',#242868,#242869,#242870); +#242868 = CARTESIAN_POINT('',(136.4,-80.1,-3.5E-02)); +#242869 = DIRECTION('',(0.,0.,1.)); +#242870 = DIRECTION('',(1.,0.,-0.)); +#242871 = ORIENTED_EDGE('',*,*,#242855,.F.); +#242872 = ORIENTED_EDGE('',*,*,#242873,.F.); +#242873 = EDGE_CURVE('',#242856,#242856,#242874,.T.); +#242874 = CIRCLE('',#242875,0.137255); +#242875 = AXIS2_PLACEMENT_3D('',#242876,#242877,#242878); +#242876 = CARTESIAN_POINT('',(136.4,-80.1,0.)); +#242877 = DIRECTION('',(0.,0.,1.)); +#242878 = DIRECTION('',(1.,0.,-0.)); +#242879 = CYLINDRICAL_SURFACE('',#242880,0.137255); +#242880 = AXIS2_PLACEMENT_3D('',#242881,#242882,#242883); +#242881 = CARTESIAN_POINT('',(136.4,-80.1,0.)); +#242882 = DIRECTION('',(0.,0.,1.)); +#242883 = DIRECTION('',(1.,0.,-0.)); +#242884 = ADVANCED_FACE('',(#242885,#242922,#242925),#242928,.F.); +#242885 = FACE_BOUND('',#242886,.F.); +#242886 = EDGE_LOOP('',(#242887,#242888,#242889,#242890,#242891,#242892, + #242893,#242894,#242895,#242896,#242897,#242898,#242899,#242900, + #242901,#242902,#242903,#242904,#242905,#242906,#242907,#242908, + #242909,#242910,#242911,#242912,#242913,#242914,#242915,#242916, + #242917,#242918,#242919,#242920,#242921)); +#242887 = ORIENTED_EDGE('',*,*,#241757,.T.); +#242888 = ORIENTED_EDGE('',*,*,#241788,.T.); +#242889 = ORIENTED_EDGE('',*,*,#241819,.T.); +#242890 = ORIENTED_EDGE('',*,*,#241850,.T.); +#242891 = ORIENTED_EDGE('',*,*,#241881,.T.); +#242892 = ORIENTED_EDGE('',*,*,#241912,.T.); +#242893 = ORIENTED_EDGE('',*,*,#241943,.T.); +#242894 = ORIENTED_EDGE('',*,*,#241974,.T.); +#242895 = ORIENTED_EDGE('',*,*,#242005,.T.); +#242896 = ORIENTED_EDGE('',*,*,#242036,.T.); +#242897 = ORIENTED_EDGE('',*,*,#242067,.T.); +#242898 = ORIENTED_EDGE('',*,*,#242098,.T.); +#242899 = ORIENTED_EDGE('',*,*,#242129,.T.); +#242900 = ORIENTED_EDGE('',*,*,#242161,.T.); +#242901 = ORIENTED_EDGE('',*,*,#242193,.T.); +#242902 = ORIENTED_EDGE('',*,*,#242225,.T.); +#242903 = ORIENTED_EDGE('',*,*,#242257,.T.); +#242904 = ORIENTED_EDGE('',*,*,#242288,.T.); +#242905 = ORIENTED_EDGE('',*,*,#242319,.T.); +#242906 = ORIENTED_EDGE('',*,*,#242350,.T.); +#242907 = ORIENTED_EDGE('',*,*,#242381,.T.); +#242908 = ORIENTED_EDGE('',*,*,#242412,.T.); +#242909 = ORIENTED_EDGE('',*,*,#242443,.T.); +#242910 = ORIENTED_EDGE('',*,*,#242474,.T.); +#242911 = ORIENTED_EDGE('',*,*,#242505,.T.); +#242912 = ORIENTED_EDGE('',*,*,#242536,.T.); +#242913 = ORIENTED_EDGE('',*,*,#242567,.T.); +#242914 = ORIENTED_EDGE('',*,*,#242598,.T.); +#242915 = ORIENTED_EDGE('',*,*,#242629,.T.); +#242916 = ORIENTED_EDGE('',*,*,#242660,.T.); +#242917 = ORIENTED_EDGE('',*,*,#242691,.T.); +#242918 = ORIENTED_EDGE('',*,*,#242722,.T.); +#242919 = ORIENTED_EDGE('',*,*,#242753,.T.); +#242920 = ORIENTED_EDGE('',*,*,#242785,.T.); +#242921 = ORIENTED_EDGE('',*,*,#242808,.T.); +#242922 = FACE_BOUND('',#242923,.F.); +#242923 = EDGE_LOOP('',(#242924)); +#242924 = ORIENTED_EDGE('',*,*,#242840,.T.); +#242925 = FACE_BOUND('',#242926,.F.); +#242926 = EDGE_LOOP('',(#242927)); +#242927 = ORIENTED_EDGE('',*,*,#242873,.T.); +#242928 = PLANE('',#242929); +#242929 = AXIS2_PLACEMENT_3D('',#242930,#242931,#242932); +#242930 = CARTESIAN_POINT('',(0.,0.,0.)); +#242931 = DIRECTION('',(-0.,-0.,-1.)); +#242932 = DIRECTION('',(-1.,0.,0.)); +#242933 = ADVANCED_FACE('',(#242934,#242971,#242974),#242977,.T.); +#242934 = FACE_BOUND('',#242935,.T.); +#242935 = EDGE_LOOP('',(#242936,#242937,#242938,#242939,#242940,#242941, + #242942,#242943,#242944,#242945,#242946,#242947,#242948,#242949, + #242950,#242951,#242952,#242953,#242954,#242955,#242956,#242957, + #242958,#242959,#242960,#242961,#242962,#242963,#242964,#242965, + #242966,#242967,#242968,#242969,#242970)); +#242936 = ORIENTED_EDGE('',*,*,#241741,.T.); +#242937 = ORIENTED_EDGE('',*,*,#241772,.T.); +#242938 = ORIENTED_EDGE('',*,*,#241803,.T.); +#242939 = ORIENTED_EDGE('',*,*,#241834,.T.); +#242940 = ORIENTED_EDGE('',*,*,#241865,.T.); +#242941 = ORIENTED_EDGE('',*,*,#241896,.T.); +#242942 = ORIENTED_EDGE('',*,*,#241927,.T.); +#242943 = ORIENTED_EDGE('',*,*,#241958,.T.); +#242944 = ORIENTED_EDGE('',*,*,#241989,.T.); +#242945 = ORIENTED_EDGE('',*,*,#242020,.T.); +#242946 = ORIENTED_EDGE('',*,*,#242051,.T.); +#242947 = ORIENTED_EDGE('',*,*,#242082,.T.); +#242948 = ORIENTED_EDGE('',*,*,#242113,.T.); +#242949 = ORIENTED_EDGE('',*,*,#242144,.T.); +#242950 = ORIENTED_EDGE('',*,*,#242177,.T.); +#242951 = ORIENTED_EDGE('',*,*,#242208,.T.); +#242952 = ORIENTED_EDGE('',*,*,#242241,.T.); +#242953 = ORIENTED_EDGE('',*,*,#242272,.T.); +#242954 = ORIENTED_EDGE('',*,*,#242303,.T.); +#242955 = ORIENTED_EDGE('',*,*,#242334,.T.); +#242956 = ORIENTED_EDGE('',*,*,#242365,.T.); +#242957 = ORIENTED_EDGE('',*,*,#242396,.T.); +#242958 = ORIENTED_EDGE('',*,*,#242427,.T.); +#242959 = ORIENTED_EDGE('',*,*,#242458,.T.); +#242960 = ORIENTED_EDGE('',*,*,#242489,.T.); +#242961 = ORIENTED_EDGE('',*,*,#242520,.T.); +#242962 = ORIENTED_EDGE('',*,*,#242551,.T.); +#242963 = ORIENTED_EDGE('',*,*,#242582,.T.); +#242964 = ORIENTED_EDGE('',*,*,#242613,.T.); +#242965 = ORIENTED_EDGE('',*,*,#242644,.T.); +#242966 = ORIENTED_EDGE('',*,*,#242675,.T.); +#242967 = ORIENTED_EDGE('',*,*,#242706,.T.); +#242968 = ORIENTED_EDGE('',*,*,#242737,.T.); +#242969 = ORIENTED_EDGE('',*,*,#242768,.T.); +#242970 = ORIENTED_EDGE('',*,*,#242801,.T.); +#242971 = FACE_BOUND('',#242972,.T.); +#242972 = EDGE_LOOP('',(#242973)); +#242973 = ORIENTED_EDGE('',*,*,#242832,.T.); +#242974 = FACE_BOUND('',#242975,.T.); +#242975 = EDGE_LOOP('',(#242976)); +#242976 = ORIENTED_EDGE('',*,*,#242865,.T.); +#242977 = PLANE('',#242978); +#242978 = AXIS2_PLACEMENT_3D('',#242979,#242980,#242981); +#242979 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#242980 = DIRECTION('',(-0.,-0.,-1.)); +#242981 = DIRECTION('',(-1.,0.,0.)); +#242982 = MANIFOLD_SOLID_BREP('',#242983); +#242983 = CLOSED_SHELL('',(#242984,#243026,#243057,#243088,#243119, + #243150,#243181,#243212,#243243,#243274,#243305,#243336,#243367, + #243398,#243429,#243460,#243491,#243522,#243555,#243586,#243617, + #243648,#243679,#243710,#243741,#243772,#243803,#243834,#243865, + #243896,#243927,#243958,#243989,#244011,#244044,#244088)); +#242984 = ADVANCED_FACE('',(#242985),#243021,.T.); +#242985 = FACE_BOUND('',#242986,.T.); +#242986 = EDGE_LOOP('',(#242987,#242997,#243006,#243014)); +#242987 = ORIENTED_EDGE('',*,*,#242988,.T.); +#242988 = EDGE_CURVE('',#242989,#242991,#242993,.T.); +#242989 = VERTEX_POINT('',#242990); +#242990 = CARTESIAN_POINT('',(129.230491,-69.828079,1.51)); +#242991 = VERTEX_POINT('',#242992); +#242992 = CARTESIAN_POINT('',(129.230491,-69.828079,1.545)); +#242993 = LINE('',#242994,#242995); +#242994 = CARTESIAN_POINT('',(129.230491,-69.828079,1.51)); +#242995 = VECTOR('',#242996,1.); +#242996 = DIRECTION('',(0.,0.,1.)); +#242997 = ORIENTED_EDGE('',*,*,#242998,.T.); +#242998 = EDGE_CURVE('',#242991,#242999,#243001,.T.); +#242999 = VERTEX_POINT('',#243000); +#243000 = CARTESIAN_POINT('',(129.230491,-69.631921,1.545)); +#243001 = CIRCLE('',#243002,0.100000456609); +#243002 = AXIS2_PLACEMENT_3D('',#243003,#243004,#243005); +#243003 = CARTESIAN_POINT('',(129.25,-69.73,1.545)); +#243004 = DIRECTION('',(0.,0.,-1.)); +#243005 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#243006 = ORIENTED_EDGE('',*,*,#243007,.F.); +#243007 = EDGE_CURVE('',#243008,#242999,#243010,.T.); +#243008 = VERTEX_POINT('',#243009); +#243009 = CARTESIAN_POINT('',(129.230491,-69.631921,1.51)); +#243010 = LINE('',#243011,#243012); +#243011 = CARTESIAN_POINT('',(129.230491,-69.631921,1.51)); +#243012 = VECTOR('',#243013,1.); +#243013 = DIRECTION('',(0.,0.,1.)); +#243014 = ORIENTED_EDGE('',*,*,#243015,.F.); +#243015 = EDGE_CURVE('',#242989,#243008,#243016,.T.); +#243016 = CIRCLE('',#243017,0.100000456609); +#243017 = AXIS2_PLACEMENT_3D('',#243018,#243019,#243020); +#243018 = CARTESIAN_POINT('',(129.25,-69.73,1.51)); +#243019 = DIRECTION('',(0.,0.,-1.)); +#243020 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#243021 = CYLINDRICAL_SURFACE('',#243022,0.100000456609); +#243022 = AXIS2_PLACEMENT_3D('',#243023,#243024,#243025); +#243023 = CARTESIAN_POINT('',(129.25,-69.73,1.51)); +#243024 = DIRECTION('',(0.,0.,-1.)); +#243025 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#243026 = ADVANCED_FACE('',(#243027),#243052,.T.); +#243027 = FACE_BOUND('',#243028,.T.); +#243028 = EDGE_LOOP('',(#243029,#243030,#243038,#243046)); +#243029 = ORIENTED_EDGE('',*,*,#243007,.T.); +#243030 = ORIENTED_EDGE('',*,*,#243031,.T.); +#243031 = EDGE_CURVE('',#242999,#243032,#243034,.T.); +#243032 = VERTEX_POINT('',#243033); +#243033 = CARTESIAN_POINT('',(130.249509,-69.631921,1.545)); +#243034 = LINE('',#243035,#243036); +#243035 = CARTESIAN_POINT('',(129.230491,-69.631921,1.545)); +#243036 = VECTOR('',#243037,1.); +#243037 = DIRECTION('',(1.,0.,0.)); +#243038 = ORIENTED_EDGE('',*,*,#243039,.F.); +#243039 = EDGE_CURVE('',#243040,#243032,#243042,.T.); +#243040 = VERTEX_POINT('',#243041); +#243041 = CARTESIAN_POINT('',(130.249509,-69.631921,1.51)); +#243042 = LINE('',#243043,#243044); +#243043 = CARTESIAN_POINT('',(130.249509,-69.631921,1.51)); +#243044 = VECTOR('',#243045,1.); +#243045 = DIRECTION('',(0.,0.,1.)); +#243046 = ORIENTED_EDGE('',*,*,#243047,.F.); +#243047 = EDGE_CURVE('',#243008,#243040,#243048,.T.); +#243048 = LINE('',#243049,#243050); +#243049 = CARTESIAN_POINT('',(129.230491,-69.631921,1.51)); +#243050 = VECTOR('',#243051,1.); +#243051 = DIRECTION('',(1.,0.,0.)); +#243052 = PLANE('',#243053); +#243053 = AXIS2_PLACEMENT_3D('',#243054,#243055,#243056); +#243054 = CARTESIAN_POINT('',(129.230491,-69.631921,1.51)); +#243055 = DIRECTION('',(0.,1.,0.)); +#243056 = DIRECTION('',(1.,0.,0.)); +#243057 = ADVANCED_FACE('',(#243058),#243083,.T.); +#243058 = FACE_BOUND('',#243059,.T.); +#243059 = EDGE_LOOP('',(#243060,#243061,#243069,#243077)); +#243060 = ORIENTED_EDGE('',*,*,#243039,.T.); +#243061 = ORIENTED_EDGE('',*,*,#243062,.T.); +#243062 = EDGE_CURVE('',#243032,#243063,#243065,.T.); +#243063 = VERTEX_POINT('',#243064); +#243064 = CARTESIAN_POINT('',(130.285557,-69.646853,1.545)); +#243065 = LINE('',#243066,#243067); +#243066 = CARTESIAN_POINT('',(130.249509,-69.631921,1.545)); +#243067 = VECTOR('',#243068,1.); +#243068 = DIRECTION('',(0.923875640631,-0.382692828059,0.)); +#243069 = ORIENTED_EDGE('',*,*,#243070,.F.); +#243070 = EDGE_CURVE('',#243071,#243063,#243073,.T.); +#243071 = VERTEX_POINT('',#243072); +#243072 = CARTESIAN_POINT('',(130.285557,-69.646853,1.51)); +#243073 = LINE('',#243074,#243075); +#243074 = CARTESIAN_POINT('',(130.285557,-69.646853,1.51)); +#243075 = VECTOR('',#243076,1.); +#243076 = DIRECTION('',(0.,0.,1.)); +#243077 = ORIENTED_EDGE('',*,*,#243078,.F.); +#243078 = EDGE_CURVE('',#243040,#243071,#243079,.T.); +#243079 = LINE('',#243080,#243081); +#243080 = CARTESIAN_POINT('',(130.249509,-69.631921,1.51)); +#243081 = VECTOR('',#243082,1.); +#243082 = DIRECTION('',(0.923875640631,-0.382692828059,0.)); +#243083 = PLANE('',#243084); +#243084 = AXIS2_PLACEMENT_3D('',#243085,#243086,#243087); +#243085 = CARTESIAN_POINT('',(130.249509,-69.631921,1.51)); +#243086 = DIRECTION('',(0.382692828059,0.923875640631,-0.)); +#243087 = DIRECTION('',(0.923875640631,-0.382692828059,0.)); +#243088 = ADVANCED_FACE('',(#243089),#243114,.T.); +#243089 = FACE_BOUND('',#243090,.T.); +#243090 = EDGE_LOOP('',(#243091,#243092,#243100,#243108)); +#243091 = ORIENTED_EDGE('',*,*,#243070,.T.); +#243092 = ORIENTED_EDGE('',*,*,#243093,.T.); +#243093 = EDGE_CURVE('',#243063,#243094,#243096,.T.); +#243094 = VERTEX_POINT('',#243095); +#243095 = CARTESIAN_POINT('',(134.433147,-73.794443,1.545)); +#243096 = LINE('',#243097,#243098); +#243097 = CARTESIAN_POINT('',(130.285557,-69.646853,1.545)); +#243098 = VECTOR('',#243099,1.); +#243099 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#243100 = ORIENTED_EDGE('',*,*,#243101,.F.); +#243101 = EDGE_CURVE('',#243102,#243094,#243104,.T.); +#243102 = VERTEX_POINT('',#243103); +#243103 = CARTESIAN_POINT('',(134.433147,-73.794443,1.51)); +#243104 = LINE('',#243105,#243106); +#243105 = CARTESIAN_POINT('',(134.433147,-73.794443,1.51)); +#243106 = VECTOR('',#243107,1.); +#243107 = DIRECTION('',(0.,0.,1.)); +#243108 = ORIENTED_EDGE('',*,*,#243109,.F.); +#243109 = EDGE_CURVE('',#243071,#243102,#243110,.T.); +#243110 = LINE('',#243111,#243112); +#243111 = CARTESIAN_POINT('',(130.285557,-69.646853,1.51)); +#243112 = VECTOR('',#243113,1.); +#243113 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#243114 = PLANE('',#243115); +#243115 = AXIS2_PLACEMENT_3D('',#243116,#243117,#243118); +#243116 = CARTESIAN_POINT('',(130.285557,-69.646853,1.51)); +#243117 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#243118 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#243119 = ADVANCED_FACE('',(#243120),#243145,.T.); +#243120 = FACE_BOUND('',#243121,.T.); +#243121 = EDGE_LOOP('',(#243122,#243123,#243131,#243139)); +#243122 = ORIENTED_EDGE('',*,*,#243101,.T.); +#243123 = ORIENTED_EDGE('',*,*,#243124,.T.); +#243124 = EDGE_CURVE('',#243094,#243125,#243127,.T.); +#243125 = VERTEX_POINT('',#243126); +#243126 = CARTESIAN_POINT('',(134.448079,-73.830491,1.545)); +#243127 = LINE('',#243128,#243129); +#243128 = CARTESIAN_POINT('',(134.433147,-73.794443,1.545)); +#243129 = VECTOR('',#243130,1.); +#243130 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243131 = ORIENTED_EDGE('',*,*,#243132,.F.); +#243132 = EDGE_CURVE('',#243133,#243125,#243135,.T.); +#243133 = VERTEX_POINT('',#243134); +#243134 = CARTESIAN_POINT('',(134.448079,-73.830491,1.51)); +#243135 = LINE('',#243136,#243137); +#243136 = CARTESIAN_POINT('',(134.448079,-73.830491,1.51)); +#243137 = VECTOR('',#243138,1.); +#243138 = DIRECTION('',(0.,0.,1.)); +#243139 = ORIENTED_EDGE('',*,*,#243140,.F.); +#243140 = EDGE_CURVE('',#243102,#243133,#243141,.T.); +#243141 = LINE('',#243142,#243143); +#243142 = CARTESIAN_POINT('',(134.433147,-73.794443,1.51)); +#243143 = VECTOR('',#243144,1.); +#243144 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243145 = PLANE('',#243146); +#243146 = AXIS2_PLACEMENT_3D('',#243147,#243148,#243149); +#243147 = CARTESIAN_POINT('',(134.433147,-73.794443,1.51)); +#243148 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#243149 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243150 = ADVANCED_FACE('',(#243151),#243176,.T.); +#243151 = FACE_BOUND('',#243152,.T.); +#243152 = EDGE_LOOP('',(#243153,#243154,#243162,#243170)); +#243153 = ORIENTED_EDGE('',*,*,#243132,.T.); +#243154 = ORIENTED_EDGE('',*,*,#243155,.T.); +#243155 = EDGE_CURVE('',#243125,#243156,#243158,.T.); +#243156 = VERTEX_POINT('',#243157); +#243157 = CARTESIAN_POINT('',(134.45,-77.808576,1.545)); +#243158 = LINE('',#243159,#243160); +#243159 = CARTESIAN_POINT('',(134.448079,-73.830491,1.545)); +#243160 = VECTOR('',#243161,1.); +#243161 = DIRECTION('',(4.828956083152E-04,-0.999999883406,0.)); +#243162 = ORIENTED_EDGE('',*,*,#243163,.F.); +#243163 = EDGE_CURVE('',#243164,#243156,#243166,.T.); +#243164 = VERTEX_POINT('',#243165); +#243165 = CARTESIAN_POINT('',(134.45,-77.808576,1.51)); +#243166 = LINE('',#243167,#243168); +#243167 = CARTESIAN_POINT('',(134.45,-77.808576,1.51)); +#243168 = VECTOR('',#243169,1.); +#243169 = DIRECTION('',(0.,0.,1.)); +#243170 = ORIENTED_EDGE('',*,*,#243171,.F.); +#243171 = EDGE_CURVE('',#243133,#243164,#243172,.T.); +#243172 = LINE('',#243173,#243174); +#243173 = CARTESIAN_POINT('',(134.448079,-73.830491,1.51)); +#243174 = VECTOR('',#243175,1.); +#243175 = DIRECTION('',(4.828956083152E-04,-0.999999883406,0.)); +#243176 = PLANE('',#243177); +#243177 = AXIS2_PLACEMENT_3D('',#243178,#243179,#243180); +#243178 = CARTESIAN_POINT('',(134.448079,-73.830491,1.51)); +#243179 = DIRECTION('',(0.999999883406,4.828956083152E-04,-0.)); +#243180 = DIRECTION('',(4.828956083152E-04,-0.999999883406,0.)); +#243181 = ADVANCED_FACE('',(#243182),#243207,.T.); +#243182 = FACE_BOUND('',#243183,.T.); +#243183 = EDGE_LOOP('',(#243184,#243185,#243193,#243201)); +#243184 = ORIENTED_EDGE('',*,*,#243163,.T.); +#243185 = ORIENTED_EDGE('',*,*,#243186,.T.); +#243186 = EDGE_CURVE('',#243156,#243187,#243189,.T.); +#243187 = VERTEX_POINT('',#243188); +#243188 = CARTESIAN_POINT('',(134.483817,-77.845456,1.545)); +#243189 = LINE('',#243190,#243191); +#243190 = CARTESIAN_POINT('',(134.45,-77.808576,1.545)); +#243191 = VECTOR('',#243192,1.); +#243192 = DIRECTION('',(0.675836839028,-0.737051264847,0.)); +#243193 = ORIENTED_EDGE('',*,*,#243194,.F.); +#243194 = EDGE_CURVE('',#243195,#243187,#243197,.T.); +#243195 = VERTEX_POINT('',#243196); +#243196 = CARTESIAN_POINT('',(134.483817,-77.845456,1.51)); +#243197 = LINE('',#243198,#243199); +#243198 = CARTESIAN_POINT('',(134.483817,-77.845456,1.51)); +#243199 = VECTOR('',#243200,1.); +#243200 = DIRECTION('',(0.,0.,1.)); +#243201 = ORIENTED_EDGE('',*,*,#243202,.F.); +#243202 = EDGE_CURVE('',#243164,#243195,#243203,.T.); +#243203 = LINE('',#243204,#243205); +#243204 = CARTESIAN_POINT('',(134.45,-77.808576,1.51)); +#243205 = VECTOR('',#243206,1.); +#243206 = DIRECTION('',(0.675836839028,-0.737051264847,0.)); +#243207 = PLANE('',#243208); +#243208 = AXIS2_PLACEMENT_3D('',#243209,#243210,#243211); +#243209 = CARTESIAN_POINT('',(134.45,-77.808576,1.51)); +#243210 = DIRECTION('',(0.737051264847,0.675836839028,-0.)); +#243211 = DIRECTION('',(0.675836839028,-0.737051264847,0.)); +#243212 = ADVANCED_FACE('',(#243213),#243238,.T.); +#243213 = FACE_BOUND('',#243214,.T.); +#243214 = EDGE_LOOP('',(#243215,#243216,#243224,#243232)); +#243215 = ORIENTED_EDGE('',*,*,#243194,.T.); +#243216 = ORIENTED_EDGE('',*,*,#243217,.T.); +#243217 = EDGE_CURVE('',#243187,#243218,#243220,.T.); +#243218 = VERTEX_POINT('',#243219); +#243219 = CARTESIAN_POINT('',(134.498296,-77.8827,1.545)); +#243220 = LINE('',#243221,#243222); +#243221 = CARTESIAN_POINT('',(134.483817,-77.845456,1.545)); +#243222 = VECTOR('',#243223,1.); +#243223 = DIRECTION('',(0.362342400245,-0.932045055233,0.)); +#243224 = ORIENTED_EDGE('',*,*,#243225,.F.); +#243225 = EDGE_CURVE('',#243226,#243218,#243228,.T.); +#243226 = VERTEX_POINT('',#243227); +#243227 = CARTESIAN_POINT('',(134.498296,-77.8827,1.51)); +#243228 = LINE('',#243229,#243230); +#243229 = CARTESIAN_POINT('',(134.498296,-77.8827,1.51)); +#243230 = VECTOR('',#243231,1.); +#243231 = DIRECTION('',(0.,0.,1.)); +#243232 = ORIENTED_EDGE('',*,*,#243233,.F.); +#243233 = EDGE_CURVE('',#243195,#243226,#243234,.T.); +#243234 = LINE('',#243235,#243236); +#243235 = CARTESIAN_POINT('',(134.483817,-77.845456,1.51)); +#243236 = VECTOR('',#243237,1.); +#243237 = DIRECTION('',(0.362342400245,-0.932045055233,0.)); +#243238 = PLANE('',#243239); +#243239 = AXIS2_PLACEMENT_3D('',#243240,#243241,#243242); +#243240 = CARTESIAN_POINT('',(134.483817,-77.845456,1.51)); +#243241 = DIRECTION('',(0.932045055233,0.362342400245,-0.)); +#243242 = DIRECTION('',(0.362342400245,-0.932045055233,0.)); +#243243 = ADVANCED_FACE('',(#243244),#243269,.T.); +#243244 = FACE_BOUND('',#243245,.T.); +#243245 = EDGE_LOOP('',(#243246,#243247,#243255,#243263)); +#243246 = ORIENTED_EDGE('',*,*,#243225,.T.); +#243247 = ORIENTED_EDGE('',*,*,#243248,.T.); +#243248 = EDGE_CURVE('',#243218,#243249,#243251,.T.); +#243249 = VERTEX_POINT('',#243250); +#243250 = CARTESIAN_POINT('',(134.5,-78.304824,1.545)); +#243251 = LINE('',#243252,#243253); +#243252 = CARTESIAN_POINT('',(134.498296,-77.8827,1.545)); +#243253 = VECTOR('',#243254,1.); +#243254 = DIRECTION('',(4.036695654993E-03,-0.999991852511,0.)); +#243255 = ORIENTED_EDGE('',*,*,#243256,.F.); +#243256 = EDGE_CURVE('',#243257,#243249,#243259,.T.); +#243257 = VERTEX_POINT('',#243258); +#243258 = CARTESIAN_POINT('',(134.5,-78.304824,1.51)); +#243259 = LINE('',#243260,#243261); +#243260 = CARTESIAN_POINT('',(134.5,-78.304824,1.51)); +#243261 = VECTOR('',#243262,1.); +#243262 = DIRECTION('',(0.,0.,1.)); +#243263 = ORIENTED_EDGE('',*,*,#243264,.F.); +#243264 = EDGE_CURVE('',#243226,#243257,#243265,.T.); +#243265 = LINE('',#243266,#243267); +#243266 = CARTESIAN_POINT('',(134.498296,-77.8827,1.51)); +#243267 = VECTOR('',#243268,1.); +#243268 = DIRECTION('',(4.036695654993E-03,-0.999991852511,0.)); +#243269 = PLANE('',#243270); +#243270 = AXIS2_PLACEMENT_3D('',#243271,#243272,#243273); +#243271 = CARTESIAN_POINT('',(134.498296,-77.8827,1.51)); +#243272 = DIRECTION('',(0.999991852511,4.036695654993E-03,-0.)); +#243273 = DIRECTION('',(4.036695654993E-03,-0.999991852511,0.)); +#243274 = ADVANCED_FACE('',(#243275),#243300,.T.); +#243275 = FACE_BOUND('',#243276,.T.); +#243276 = EDGE_LOOP('',(#243277,#243278,#243286,#243294)); +#243277 = ORIENTED_EDGE('',*,*,#243256,.T.); +#243278 = ORIENTED_EDGE('',*,*,#243279,.T.); +#243279 = EDGE_CURVE('',#243249,#243280,#243282,.T.); +#243280 = VERTEX_POINT('',#243281); +#243281 = CARTESIAN_POINT('',(135.283147,-79.090689,1.545)); +#243282 = LINE('',#243283,#243284); +#243283 = CARTESIAN_POINT('',(134.5,-78.304824,1.545)); +#243284 = VECTOR('',#243285,1.); +#243285 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#243286 = ORIENTED_EDGE('',*,*,#243287,.F.); +#243287 = EDGE_CURVE('',#243288,#243280,#243290,.T.); +#243288 = VERTEX_POINT('',#243289); +#243289 = CARTESIAN_POINT('',(135.283147,-79.090689,1.51)); +#243290 = LINE('',#243291,#243292); +#243291 = CARTESIAN_POINT('',(135.283147,-79.090689,1.51)); +#243292 = VECTOR('',#243293,1.); +#243293 = DIRECTION('',(0.,0.,1.)); +#243294 = ORIENTED_EDGE('',*,*,#243295,.F.); +#243295 = EDGE_CURVE('',#243257,#243288,#243296,.T.); +#243296 = LINE('',#243297,#243298); +#243297 = CARTESIAN_POINT('',(134.5,-78.304824,1.51)); +#243298 = VECTOR('',#243299,1.); +#243299 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#243300 = PLANE('',#243301); +#243301 = AXIS2_PLACEMENT_3D('',#243302,#243303,#243304); +#243302 = CARTESIAN_POINT('',(134.5,-78.304824,1.51)); +#243303 = DIRECTION('',(0.708330639693,0.705880800753,-0.)); +#243304 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#243305 = ADVANCED_FACE('',(#243306),#243331,.T.); +#243306 = FACE_BOUND('',#243307,.T.); +#243307 = EDGE_LOOP('',(#243308,#243309,#243317,#243325)); +#243308 = ORIENTED_EDGE('',*,*,#243287,.T.); +#243309 = ORIENTED_EDGE('',*,*,#243310,.T.); +#243310 = EDGE_CURVE('',#243280,#243311,#243313,.T.); +#243311 = VERTEX_POINT('',#243312); +#243312 = CARTESIAN_POINT('',(135.298079,-79.126737,1.545)); +#243313 = LINE('',#243314,#243315); +#243314 = CARTESIAN_POINT('',(135.283147,-79.090689,1.545)); +#243315 = VECTOR('',#243316,1.); +#243316 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243317 = ORIENTED_EDGE('',*,*,#243318,.F.); +#243318 = EDGE_CURVE('',#243319,#243311,#243321,.T.); +#243319 = VERTEX_POINT('',#243320); +#243320 = CARTESIAN_POINT('',(135.298079,-79.126737,1.51)); +#243321 = LINE('',#243322,#243323); +#243322 = CARTESIAN_POINT('',(135.298079,-79.126737,1.51)); +#243323 = VECTOR('',#243324,1.); +#243324 = DIRECTION('',(0.,0.,1.)); +#243325 = ORIENTED_EDGE('',*,*,#243326,.F.); +#243326 = EDGE_CURVE('',#243288,#243319,#243327,.T.); +#243327 = LINE('',#243328,#243329); +#243328 = CARTESIAN_POINT('',(135.283147,-79.090689,1.51)); +#243329 = VECTOR('',#243330,1.); +#243330 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243331 = PLANE('',#243332); +#243332 = AXIS2_PLACEMENT_3D('',#243333,#243334,#243335); +#243333 = CARTESIAN_POINT('',(135.283147,-79.090689,1.51)); +#243334 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#243335 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#243336 = ADVANCED_FACE('',(#243337),#243362,.T.); +#243337 = FACE_BOUND('',#243338,.T.); +#243338 = EDGE_LOOP('',(#243339,#243340,#243348,#243356)); +#243339 = ORIENTED_EDGE('',*,*,#243318,.T.); +#243340 = ORIENTED_EDGE('',*,*,#243341,.T.); +#243341 = EDGE_CURVE('',#243311,#243342,#243344,.T.); +#243342 = VERTEX_POINT('',#243343); +#243343 = CARTESIAN_POINT('',(135.3,-79.958578,1.545)); +#243344 = LINE('',#243345,#243346); +#243345 = CARTESIAN_POINT('',(135.298079,-79.126737,1.545)); +#243346 = VECTOR('',#243347,1.); +#243347 = DIRECTION('',(2.309329400275E-03,-0.999997333495,0.)); +#243348 = ORIENTED_EDGE('',*,*,#243349,.F.); +#243349 = EDGE_CURVE('',#243350,#243342,#243352,.T.); +#243350 = VERTEX_POINT('',#243351); +#243351 = CARTESIAN_POINT('',(135.3,-79.958578,1.51)); +#243352 = LINE('',#243353,#243354); +#243353 = CARTESIAN_POINT('',(135.3,-79.958578,1.51)); +#243354 = VECTOR('',#243355,1.); +#243355 = DIRECTION('',(0.,0.,1.)); +#243356 = ORIENTED_EDGE('',*,*,#243357,.F.); +#243357 = EDGE_CURVE('',#243319,#243350,#243358,.T.); +#243358 = LINE('',#243359,#243360); +#243359 = CARTESIAN_POINT('',(135.298079,-79.126737,1.51)); +#243360 = VECTOR('',#243361,1.); +#243361 = DIRECTION('',(2.309329400275E-03,-0.999997333495,0.)); +#243362 = PLANE('',#243363); +#243363 = AXIS2_PLACEMENT_3D('',#243364,#243365,#243366); +#243364 = CARTESIAN_POINT('',(135.298079,-79.126737,1.51)); +#243365 = DIRECTION('',(0.999997333495,2.309329400275E-03,-0.)); +#243366 = DIRECTION('',(2.309329400275E-03,-0.999997333495,0.)); +#243367 = ADVANCED_FACE('',(#243368),#243393,.T.); +#243368 = FACE_BOUND('',#243369,.T.); +#243369 = EDGE_LOOP('',(#243370,#243371,#243379,#243387)); +#243370 = ORIENTED_EDGE('',*,*,#243349,.T.); +#243371 = ORIENTED_EDGE('',*,*,#243372,.T.); +#243372 = EDGE_CURVE('',#243342,#243373,#243375,.T.); +#243373 = VERTEX_POINT('',#243374); +#243374 = CARTESIAN_POINT('',(135.941421,-80.6,1.545)); +#243375 = LINE('',#243376,#243377); +#243376 = CARTESIAN_POINT('',(135.3,-79.958578,1.545)); +#243377 = VECTOR('',#243378,1.); +#243378 = DIRECTION('',(0.707106229983,-0.707107332389,0.)); +#243379 = ORIENTED_EDGE('',*,*,#243380,.F.); +#243380 = EDGE_CURVE('',#243381,#243373,#243383,.T.); +#243381 = VERTEX_POINT('',#243382); +#243382 = CARTESIAN_POINT('',(135.941421,-80.6,1.51)); +#243383 = LINE('',#243384,#243385); +#243384 = CARTESIAN_POINT('',(135.941421,-80.6,1.51)); +#243385 = VECTOR('',#243386,1.); +#243386 = DIRECTION('',(0.,0.,1.)); +#243387 = ORIENTED_EDGE('',*,*,#243388,.F.); +#243388 = EDGE_CURVE('',#243350,#243381,#243389,.T.); +#243389 = LINE('',#243390,#243391); +#243390 = CARTESIAN_POINT('',(135.3,-79.958578,1.51)); +#243391 = VECTOR('',#243392,1.); +#243392 = DIRECTION('',(0.707106229983,-0.707107332389,0.)); +#243393 = PLANE('',#243394); +#243394 = AXIS2_PLACEMENT_3D('',#243395,#243396,#243397); +#243395 = CARTESIAN_POINT('',(135.3,-79.958578,1.51)); +#243396 = DIRECTION('',(0.707107332389,0.707106229983,-0.)); +#243397 = DIRECTION('',(0.707106229983,-0.707107332389,0.)); +#243398 = ADVANCED_FACE('',(#243399),#243424,.T.); +#243399 = FACE_BOUND('',#243400,.T.); +#243400 = EDGE_LOOP('',(#243401,#243402,#243410,#243418)); +#243401 = ORIENTED_EDGE('',*,*,#243380,.T.); +#243402 = ORIENTED_EDGE('',*,*,#243403,.T.); +#243403 = EDGE_CURVE('',#243373,#243404,#243406,.T.); +#243404 = VERTEX_POINT('',#243405); +#243405 = CARTESIAN_POINT('',(137.219509,-80.601921,1.545)); +#243406 = LINE('',#243407,#243408); +#243407 = CARTESIAN_POINT('',(135.941421,-80.6,1.545)); +#243408 = VECTOR('',#243409,1.); +#243409 = DIRECTION('',(0.999998870458,-1.503024697955E-03,0.)); +#243410 = ORIENTED_EDGE('',*,*,#243411,.F.); +#243411 = EDGE_CURVE('',#243412,#243404,#243414,.T.); +#243412 = VERTEX_POINT('',#243413); +#243413 = CARTESIAN_POINT('',(137.219509,-80.601921,1.51)); +#243414 = LINE('',#243415,#243416); +#243415 = CARTESIAN_POINT('',(137.219509,-80.601921,1.51)); +#243416 = VECTOR('',#243417,1.); +#243417 = DIRECTION('',(0.,0.,1.)); +#243418 = ORIENTED_EDGE('',*,*,#243419,.F.); +#243419 = EDGE_CURVE('',#243381,#243412,#243420,.T.); +#243420 = LINE('',#243421,#243422); +#243421 = CARTESIAN_POINT('',(135.941421,-80.6,1.51)); +#243422 = VECTOR('',#243423,1.); +#243423 = DIRECTION('',(0.999998870458,-1.503024697955E-03,0.)); +#243424 = PLANE('',#243425); +#243425 = AXIS2_PLACEMENT_3D('',#243426,#243427,#243428); +#243426 = CARTESIAN_POINT('',(135.941421,-80.6,1.51)); +#243427 = DIRECTION('',(1.503024697955E-03,0.999998870458,-0.)); +#243428 = DIRECTION('',(0.999998870458,-1.503024697955E-03,0.)); +#243429 = ADVANCED_FACE('',(#243430),#243455,.T.); +#243430 = FACE_BOUND('',#243431,.T.); +#243431 = EDGE_LOOP('',(#243432,#243433,#243441,#243449)); +#243432 = ORIENTED_EDGE('',*,*,#243411,.T.); +#243433 = ORIENTED_EDGE('',*,*,#243434,.T.); +#243434 = EDGE_CURVE('',#243404,#243435,#243437,.T.); +#243435 = VERTEX_POINT('',#243436); +#243436 = CARTESIAN_POINT('',(137.255557,-80.616853,1.545)); +#243437 = LINE('',#243438,#243439); +#243438 = CARTESIAN_POINT('',(137.219509,-80.601921,1.545)); +#243439 = VECTOR('',#243440,1.); +#243440 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#243441 = ORIENTED_EDGE('',*,*,#243442,.F.); +#243442 = EDGE_CURVE('',#243443,#243435,#243445,.T.); +#243443 = VERTEX_POINT('',#243444); +#243444 = CARTESIAN_POINT('',(137.255557,-80.616853,1.51)); +#243445 = LINE('',#243446,#243447); +#243446 = CARTESIAN_POINT('',(137.255557,-80.616853,1.51)); +#243447 = VECTOR('',#243448,1.); +#243448 = DIRECTION('',(0.,0.,1.)); +#243449 = ORIENTED_EDGE('',*,*,#243450,.F.); +#243450 = EDGE_CURVE('',#243412,#243443,#243451,.T.); +#243451 = LINE('',#243452,#243453); +#243452 = CARTESIAN_POINT('',(137.219509,-80.601921,1.51)); +#243453 = VECTOR('',#243454,1.); +#243454 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#243455 = PLANE('',#243456); +#243456 = AXIS2_PLACEMENT_3D('',#243457,#243458,#243459); +#243457 = CARTESIAN_POINT('',(137.219509,-80.601921,1.51)); +#243458 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#243459 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#243460 = ADVANCED_FACE('',(#243461),#243486,.T.); +#243461 = FACE_BOUND('',#243462,.T.); +#243462 = EDGE_LOOP('',(#243463,#243464,#243472,#243480)); +#243463 = ORIENTED_EDGE('',*,*,#243442,.T.); +#243464 = ORIENTED_EDGE('',*,*,#243465,.T.); +#243465 = EDGE_CURVE('',#243435,#243466,#243468,.T.); +#243466 = VERTEX_POINT('',#243467); +#243467 = CARTESIAN_POINT('',(137.371921,-80.730499,1.545)); +#243468 = LINE('',#243469,#243470); +#243469 = CARTESIAN_POINT('',(137.255557,-80.616853,1.545)); +#243470 = VECTOR('',#243471,1.); +#243471 = DIRECTION('',(0.715412627555,-0.698702205761,0.)); +#243472 = ORIENTED_EDGE('',*,*,#243473,.F.); +#243473 = EDGE_CURVE('',#243474,#243466,#243476,.T.); +#243474 = VERTEX_POINT('',#243475); +#243475 = CARTESIAN_POINT('',(137.371921,-80.730499,1.51)); +#243476 = LINE('',#243477,#243478); +#243477 = CARTESIAN_POINT('',(137.371921,-80.730499,1.51)); +#243478 = VECTOR('',#243479,1.); +#243479 = DIRECTION('',(0.,0.,1.)); +#243480 = ORIENTED_EDGE('',*,*,#243481,.F.); +#243481 = EDGE_CURVE('',#243443,#243474,#243482,.T.); +#243482 = LINE('',#243483,#243484); +#243483 = CARTESIAN_POINT('',(137.255557,-80.616853,1.51)); +#243484 = VECTOR('',#243485,1.); +#243485 = DIRECTION('',(0.715412627555,-0.698702205761,0.)); +#243486 = PLANE('',#243487); +#243487 = AXIS2_PLACEMENT_3D('',#243488,#243489,#243490); +#243488 = CARTESIAN_POINT('',(137.255557,-80.616853,1.51)); +#243489 = DIRECTION('',(0.698702205761,0.715412627555,-0.)); +#243490 = DIRECTION('',(0.715412627555,-0.698702205761,0.)); +#243491 = ADVANCED_FACE('',(#243492),#243517,.T.); +#243492 = FACE_BOUND('',#243493,.T.); +#243493 = EDGE_LOOP('',(#243494,#243495,#243503,#243511)); +#243494 = ORIENTED_EDGE('',*,*,#243473,.T.); +#243495 = ORIENTED_EDGE('',*,*,#243496,.T.); +#243496 = EDGE_CURVE('',#243466,#243497,#243499,.T.); +#243497 = VERTEX_POINT('',#243498); +#243498 = CARTESIAN_POINT('',(137.385195,-80.722836,1.545)); +#243499 = LINE('',#243500,#243501); +#243500 = CARTESIAN_POINT('',(137.371921,-80.730499,1.545)); +#243501 = VECTOR('',#243502,1.); +#243502 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#243503 = ORIENTED_EDGE('',*,*,#243504,.F.); +#243504 = EDGE_CURVE('',#243505,#243497,#243507,.T.); +#243505 = VERTEX_POINT('',#243506); +#243506 = CARTESIAN_POINT('',(137.385195,-80.722836,1.51)); +#243507 = LINE('',#243508,#243509); +#243508 = CARTESIAN_POINT('',(137.385195,-80.722836,1.51)); +#243509 = VECTOR('',#243510,1.); +#243510 = DIRECTION('',(0.,0.,1.)); +#243511 = ORIENTED_EDGE('',*,*,#243512,.F.); +#243512 = EDGE_CURVE('',#243474,#243505,#243513,.T.); +#243513 = LINE('',#243514,#243515); +#243514 = CARTESIAN_POINT('',(137.371921,-80.730499,1.51)); +#243515 = VECTOR('',#243516,1.); +#243516 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#243517 = PLANE('',#243518); +#243518 = AXIS2_PLACEMENT_3D('',#243519,#243520,#243521); +#243519 = CARTESIAN_POINT('',(137.371921,-80.730499,1.51)); +#243520 = DIRECTION('',(-0.499963423545,0.866046520181,0.)); +#243521 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#243522 = ADVANCED_FACE('',(#243523),#243550,.T.); +#243523 = FACE_BOUND('',#243524,.T.); +#243524 = EDGE_LOOP('',(#243525,#243526,#243535,#243543)); +#243525 = ORIENTED_EDGE('',*,*,#243504,.T.); +#243526 = ORIENTED_EDGE('',*,*,#243527,.T.); +#243527 = EDGE_CURVE('',#243497,#243528,#243530,.T.); +#243528 = VERTEX_POINT('',#243529); +#243529 = CARTESIAN_POINT('',(137.222836,-80.885195,1.545)); +#243530 = CIRCLE('',#243531,0.299999934501); +#243531 = AXIS2_PLACEMENT_3D('',#243532,#243533,#243534); +#243532 = CARTESIAN_POINT('',(137.4999998594,-80.9999998594,1.545)); +#243533 = DIRECTION('',(-0.,0.,-1.)); +#243534 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#243535 = ORIENTED_EDGE('',*,*,#243536,.F.); +#243536 = EDGE_CURVE('',#243537,#243528,#243539,.T.); +#243537 = VERTEX_POINT('',#243538); +#243538 = CARTESIAN_POINT('',(137.222836,-80.885195,1.51)); +#243539 = LINE('',#243540,#243541); +#243540 = CARTESIAN_POINT('',(137.222836,-80.885195,1.51)); +#243541 = VECTOR('',#243542,1.); +#243542 = DIRECTION('',(0.,0.,1.)); +#243543 = ORIENTED_EDGE('',*,*,#243544,.F.); +#243544 = EDGE_CURVE('',#243505,#243537,#243545,.T.); +#243545 = CIRCLE('',#243546,0.299999934501); +#243546 = AXIS2_PLACEMENT_3D('',#243547,#243548,#243549); +#243547 = CARTESIAN_POINT('',(137.4999998594,-80.9999998594,1.51)); +#243548 = DIRECTION('',(-0.,0.,-1.)); +#243549 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#243550 = CYLINDRICAL_SURFACE('',#243551,0.299999934501); +#243551 = AXIS2_PLACEMENT_3D('',#243552,#243553,#243554); +#243552 = CARTESIAN_POINT('',(137.4999998594,-80.9999998594,1.51)); +#243553 = DIRECTION('',(-0.,0.,-1.)); +#243554 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#243555 = ADVANCED_FACE('',(#243556),#243581,.T.); +#243556 = FACE_BOUND('',#243557,.T.); +#243557 = EDGE_LOOP('',(#243558,#243559,#243567,#243575)); +#243558 = ORIENTED_EDGE('',*,*,#243536,.T.); +#243559 = ORIENTED_EDGE('',*,*,#243560,.T.); +#243560 = EDGE_CURVE('',#243528,#243561,#243563,.T.); +#243561 = VERTEX_POINT('',#243562); +#243562 = CARTESIAN_POINT('',(137.230499,-80.871921,1.545)); +#243563 = LINE('',#243564,#243565); +#243564 = CARTESIAN_POINT('',(137.222836,-80.885195,1.545)); +#243565 = VECTOR('',#243566,1.); +#243566 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#243567 = ORIENTED_EDGE('',*,*,#243568,.F.); +#243568 = EDGE_CURVE('',#243569,#243561,#243571,.T.); +#243569 = VERTEX_POINT('',#243570); +#243570 = CARTESIAN_POINT('',(137.230499,-80.871921,1.51)); +#243571 = LINE('',#243572,#243573); +#243572 = CARTESIAN_POINT('',(137.230499,-80.871921,1.51)); +#243573 = VECTOR('',#243574,1.); +#243574 = DIRECTION('',(0.,0.,1.)); +#243575 = ORIENTED_EDGE('',*,*,#243576,.F.); +#243576 = EDGE_CURVE('',#243537,#243569,#243577,.T.); +#243577 = LINE('',#243578,#243579); +#243578 = CARTESIAN_POINT('',(137.222836,-80.885195,1.51)); +#243579 = VECTOR('',#243580,1.); +#243580 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#243581 = PLANE('',#243582); +#243582 = AXIS2_PLACEMENT_3D('',#243583,#243584,#243585); +#243583 = CARTESIAN_POINT('',(137.222836,-80.885195,1.51)); +#243584 = DIRECTION('',(-0.86604652018,0.499963423546,0.)); +#243585 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#243586 = ADVANCED_FACE('',(#243587),#243612,.T.); +#243587 = FACE_BOUND('',#243588,.T.); +#243588 = EDGE_LOOP('',(#243589,#243590,#243598,#243606)); +#243589 = ORIENTED_EDGE('',*,*,#243568,.T.); +#243590 = ORIENTED_EDGE('',*,*,#243591,.T.); +#243591 = EDGE_CURVE('',#243561,#243592,#243594,.T.); +#243592 = VERTEX_POINT('',#243593); +#243593 = CARTESIAN_POINT('',(137.158578,-80.8,1.545)); +#243594 = LINE('',#243595,#243596); +#243595 = CARTESIAN_POINT('',(137.230499,-80.871921,1.545)); +#243596 = VECTOR('',#243597,1.); +#243597 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243598 = ORIENTED_EDGE('',*,*,#243599,.F.); +#243599 = EDGE_CURVE('',#243600,#243592,#243602,.T.); +#243600 = VERTEX_POINT('',#243601); +#243601 = CARTESIAN_POINT('',(137.158578,-80.8,1.51)); +#243602 = LINE('',#243603,#243604); +#243603 = CARTESIAN_POINT('',(137.158578,-80.8,1.51)); +#243604 = VECTOR('',#243605,1.); +#243605 = DIRECTION('',(0.,0.,1.)); +#243606 = ORIENTED_EDGE('',*,*,#243607,.F.); +#243607 = EDGE_CURVE('',#243569,#243600,#243608,.T.); +#243608 = LINE('',#243609,#243610); +#243609 = CARTESIAN_POINT('',(137.230499,-80.871921,1.51)); +#243610 = VECTOR('',#243611,1.); +#243611 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243612 = PLANE('',#243613); +#243613 = AXIS2_PLACEMENT_3D('',#243614,#243615,#243616); +#243614 = CARTESIAN_POINT('',(137.230499,-80.871921,1.51)); +#243615 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#243616 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243617 = ADVANCED_FACE('',(#243618),#243643,.T.); +#243618 = FACE_BOUND('',#243619,.T.); +#243619 = EDGE_LOOP('',(#243620,#243621,#243629,#243637)); +#243620 = ORIENTED_EDGE('',*,*,#243599,.T.); +#243621 = ORIENTED_EDGE('',*,*,#243622,.T.); +#243622 = EDGE_CURVE('',#243592,#243623,#243625,.T.); +#243623 = VERTEX_POINT('',#243624); +#243624 = CARTESIAN_POINT('',(135.880491,-80.798079,1.545)); +#243625 = LINE('',#243626,#243627); +#243626 = CARTESIAN_POINT('',(137.158578,-80.8,1.545)); +#243627 = VECTOR('',#243628,1.); +#243628 = DIRECTION('',(-0.999998870456,1.503025873936E-03,0.)); +#243629 = ORIENTED_EDGE('',*,*,#243630,.F.); +#243630 = EDGE_CURVE('',#243631,#243623,#243633,.T.); +#243631 = VERTEX_POINT('',#243632); +#243632 = CARTESIAN_POINT('',(135.880491,-80.798079,1.51)); +#243633 = LINE('',#243634,#243635); +#243634 = CARTESIAN_POINT('',(135.880491,-80.798079,1.51)); +#243635 = VECTOR('',#243636,1.); +#243636 = DIRECTION('',(0.,0.,1.)); +#243637 = ORIENTED_EDGE('',*,*,#243638,.F.); +#243638 = EDGE_CURVE('',#243600,#243631,#243639,.T.); +#243639 = LINE('',#243640,#243641); +#243640 = CARTESIAN_POINT('',(137.158578,-80.8,1.51)); +#243641 = VECTOR('',#243642,1.); +#243642 = DIRECTION('',(-0.999998870456,1.503025873936E-03,0.)); +#243643 = PLANE('',#243644); +#243644 = AXIS2_PLACEMENT_3D('',#243645,#243646,#243647); +#243645 = CARTESIAN_POINT('',(137.158578,-80.8,1.51)); +#243646 = DIRECTION('',(-1.503025873936E-03,-0.999998870456,0.)); +#243647 = DIRECTION('',(-0.999998870456,1.503025873936E-03,0.)); +#243648 = ADVANCED_FACE('',(#243649),#243674,.T.); +#243649 = FACE_BOUND('',#243650,.T.); +#243650 = EDGE_LOOP('',(#243651,#243652,#243660,#243668)); +#243651 = ORIENTED_EDGE('',*,*,#243630,.T.); +#243652 = ORIENTED_EDGE('',*,*,#243653,.T.); +#243653 = EDGE_CURVE('',#243623,#243654,#243656,.T.); +#243654 = VERTEX_POINT('',#243655); +#243655 = CARTESIAN_POINT('',(135.844442,-80.783147,1.545)); +#243656 = LINE('',#243657,#243658); +#243657 = CARTESIAN_POINT('',(135.880491,-80.798079,1.545)); +#243658 = VECTOR('',#243659,1.); +#243659 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#243660 = ORIENTED_EDGE('',*,*,#243661,.F.); +#243661 = EDGE_CURVE('',#243662,#243654,#243664,.T.); +#243662 = VERTEX_POINT('',#243663); +#243663 = CARTESIAN_POINT('',(135.844442,-80.783147,1.51)); +#243664 = LINE('',#243665,#243666); +#243665 = CARTESIAN_POINT('',(135.844442,-80.783147,1.51)); +#243666 = VECTOR('',#243667,1.); +#243667 = DIRECTION('',(0.,0.,1.)); +#243668 = ORIENTED_EDGE('',*,*,#243669,.F.); +#243669 = EDGE_CURVE('',#243631,#243662,#243670,.T.); +#243670 = LINE('',#243671,#243672); +#243671 = CARTESIAN_POINT('',(135.880491,-80.798079,1.51)); +#243672 = VECTOR('',#243673,1.); +#243673 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#243674 = PLANE('',#243675); +#243675 = AXIS2_PLACEMENT_3D('',#243676,#243677,#243678); +#243676 = CARTESIAN_POINT('',(135.880491,-80.798079,1.51)); +#243677 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#243678 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#243679 = ADVANCED_FACE('',(#243680),#243705,.T.); +#243680 = FACE_BOUND('',#243681,.T.); +#243681 = EDGE_LOOP('',(#243682,#243683,#243691,#243699)); +#243682 = ORIENTED_EDGE('',*,*,#243661,.T.); +#243683 = ORIENTED_EDGE('',*,*,#243684,.T.); +#243684 = EDGE_CURVE('',#243654,#243685,#243687,.T.); +#243685 = VERTEX_POINT('',#243686); +#243686 = CARTESIAN_POINT('',(135.116853,-80.055557,1.545)); +#243687 = LINE('',#243688,#243689); +#243688 = CARTESIAN_POINT('',(135.844442,-80.783147,1.545)); +#243689 = VECTOR('',#243690,1.); +#243690 = DIRECTION('',(-0.707106295262,0.707107267111,0.)); +#243691 = ORIENTED_EDGE('',*,*,#243692,.F.); +#243692 = EDGE_CURVE('',#243693,#243685,#243695,.T.); +#243693 = VERTEX_POINT('',#243694); +#243694 = CARTESIAN_POINT('',(135.116853,-80.055557,1.51)); +#243695 = LINE('',#243696,#243697); +#243696 = CARTESIAN_POINT('',(135.116853,-80.055557,1.51)); +#243697 = VECTOR('',#243698,1.); +#243698 = DIRECTION('',(0.,0.,1.)); +#243699 = ORIENTED_EDGE('',*,*,#243700,.F.); +#243700 = EDGE_CURVE('',#243662,#243693,#243701,.T.); +#243701 = LINE('',#243702,#243703); +#243702 = CARTESIAN_POINT('',(135.844442,-80.783147,1.51)); +#243703 = VECTOR('',#243704,1.); +#243704 = DIRECTION('',(-0.707106295262,0.707107267111,0.)); +#243705 = PLANE('',#243706); +#243706 = AXIS2_PLACEMENT_3D('',#243707,#243708,#243709); +#243707 = CARTESIAN_POINT('',(135.844442,-80.783147,1.51)); +#243708 = DIRECTION('',(-0.707107267111,-0.707106295262,0.)); +#243709 = DIRECTION('',(-0.707106295262,0.707107267111,0.)); +#243710 = ADVANCED_FACE('',(#243711),#243736,.T.); +#243711 = FACE_BOUND('',#243712,.T.); +#243712 = EDGE_LOOP('',(#243713,#243714,#243722,#243730)); +#243713 = ORIENTED_EDGE('',*,*,#243692,.T.); +#243714 = ORIENTED_EDGE('',*,*,#243715,.T.); +#243715 = EDGE_CURVE('',#243685,#243716,#243718,.T.); +#243716 = VERTEX_POINT('',#243717); +#243717 = CARTESIAN_POINT('',(135.101921,-80.019509,1.545)); +#243718 = LINE('',#243719,#243720); +#243719 = CARTESIAN_POINT('',(135.116853,-80.055557,1.545)); +#243720 = VECTOR('',#243721,1.); +#243721 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243722 = ORIENTED_EDGE('',*,*,#243723,.F.); +#243723 = EDGE_CURVE('',#243724,#243716,#243726,.T.); +#243724 = VERTEX_POINT('',#243725); +#243725 = CARTESIAN_POINT('',(135.101921,-80.019509,1.51)); +#243726 = LINE('',#243727,#243728); +#243727 = CARTESIAN_POINT('',(135.101921,-80.019509,1.51)); +#243728 = VECTOR('',#243729,1.); +#243729 = DIRECTION('',(0.,0.,1.)); +#243730 = ORIENTED_EDGE('',*,*,#243731,.F.); +#243731 = EDGE_CURVE('',#243693,#243724,#243732,.T.); +#243732 = LINE('',#243733,#243734); +#243733 = CARTESIAN_POINT('',(135.116853,-80.055557,1.51)); +#243734 = VECTOR('',#243735,1.); +#243735 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243736 = PLANE('',#243737); +#243737 = AXIS2_PLACEMENT_3D('',#243738,#243739,#243740); +#243738 = CARTESIAN_POINT('',(135.116853,-80.055557,1.51)); +#243739 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#243740 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243741 = ADVANCED_FACE('',(#243742),#243767,.T.); +#243742 = FACE_BOUND('',#243743,.T.); +#243743 = EDGE_LOOP('',(#243744,#243745,#243753,#243761)); +#243744 = ORIENTED_EDGE('',*,*,#243723,.T.); +#243745 = ORIENTED_EDGE('',*,*,#243746,.T.); +#243746 = EDGE_CURVE('',#243716,#243747,#243749,.T.); +#243747 = VERTEX_POINT('',#243748); +#243748 = CARTESIAN_POINT('',(135.1,-79.187668,1.545)); +#243749 = LINE('',#243750,#243751); +#243750 = CARTESIAN_POINT('',(135.101921,-80.019509,1.545)); +#243751 = VECTOR('',#243752,1.); +#243752 = DIRECTION('',(-2.309329400275E-03,0.999997333495,0.)); +#243753 = ORIENTED_EDGE('',*,*,#243754,.F.); +#243754 = EDGE_CURVE('',#243755,#243747,#243757,.T.); +#243755 = VERTEX_POINT('',#243756); +#243756 = CARTESIAN_POINT('',(135.1,-79.187668,1.51)); +#243757 = LINE('',#243758,#243759); +#243758 = CARTESIAN_POINT('',(135.1,-79.187668,1.51)); +#243759 = VECTOR('',#243760,1.); +#243760 = DIRECTION('',(0.,0.,1.)); +#243761 = ORIENTED_EDGE('',*,*,#243762,.F.); +#243762 = EDGE_CURVE('',#243724,#243755,#243763,.T.); +#243763 = LINE('',#243764,#243765); +#243764 = CARTESIAN_POINT('',(135.101921,-80.019509,1.51)); +#243765 = VECTOR('',#243766,1.); +#243766 = DIRECTION('',(-2.309329400275E-03,0.999997333495,0.)); +#243767 = PLANE('',#243768); +#243768 = AXIS2_PLACEMENT_3D('',#243769,#243770,#243771); +#243769 = CARTESIAN_POINT('',(135.101921,-80.019509,1.51)); +#243770 = DIRECTION('',(-0.999997333495,-2.309329400275E-03,0.)); +#243771 = DIRECTION('',(-2.309329400275E-03,0.999997333495,0.)); +#243772 = ADVANCED_FACE('',(#243773),#243798,.T.); +#243773 = FACE_BOUND('',#243774,.T.); +#243774 = EDGE_LOOP('',(#243775,#243776,#243784,#243792)); +#243775 = ORIENTED_EDGE('',*,*,#243754,.T.); +#243776 = ORIENTED_EDGE('',*,*,#243777,.T.); +#243777 = EDGE_CURVE('',#243747,#243778,#243780,.T.); +#243778 = VERTEX_POINT('',#243779); +#243779 = CARTESIAN_POINT('',(134.316853,-78.401803,1.545)); +#243780 = LINE('',#243781,#243782); +#243781 = CARTESIAN_POINT('',(135.1,-79.187668,1.545)); +#243782 = VECTOR('',#243783,1.); +#243783 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#243784 = ORIENTED_EDGE('',*,*,#243785,.F.); +#243785 = EDGE_CURVE('',#243786,#243778,#243788,.T.); +#243786 = VERTEX_POINT('',#243787); +#243787 = CARTESIAN_POINT('',(134.316853,-78.401803,1.51)); +#243788 = LINE('',#243789,#243790); +#243789 = CARTESIAN_POINT('',(134.316853,-78.401803,1.51)); +#243790 = VECTOR('',#243791,1.); +#243791 = DIRECTION('',(0.,0.,1.)); +#243792 = ORIENTED_EDGE('',*,*,#243793,.F.); +#243793 = EDGE_CURVE('',#243755,#243786,#243794,.T.); +#243794 = LINE('',#243795,#243796); +#243795 = CARTESIAN_POINT('',(135.1,-79.187668,1.51)); +#243796 = VECTOR('',#243797,1.); +#243797 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#243798 = PLANE('',#243799); +#243799 = AXIS2_PLACEMENT_3D('',#243800,#243801,#243802); +#243800 = CARTESIAN_POINT('',(135.1,-79.187668,1.51)); +#243801 = DIRECTION('',(-0.708330639693,-0.705880800753,0.)); +#243802 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#243803 = ADVANCED_FACE('',(#243804),#243829,.T.); +#243804 = FACE_BOUND('',#243805,.T.); +#243805 = EDGE_LOOP('',(#243806,#243807,#243815,#243823)); +#243806 = ORIENTED_EDGE('',*,*,#243785,.T.); +#243807 = ORIENTED_EDGE('',*,*,#243808,.T.); +#243808 = EDGE_CURVE('',#243778,#243809,#243811,.T.); +#243809 = VERTEX_POINT('',#243810); +#243810 = CARTESIAN_POINT('',(134.301921,-78.365755,1.545)); +#243811 = LINE('',#243812,#243813); +#243812 = CARTESIAN_POINT('',(134.316853,-78.401803,1.545)); +#243813 = VECTOR('',#243814,1.); +#243814 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243815 = ORIENTED_EDGE('',*,*,#243816,.F.); +#243816 = EDGE_CURVE('',#243817,#243809,#243819,.T.); +#243817 = VERTEX_POINT('',#243818); +#243818 = CARTESIAN_POINT('',(134.301921,-78.365755,1.51)); +#243819 = LINE('',#243820,#243821); +#243820 = CARTESIAN_POINT('',(134.301921,-78.365755,1.51)); +#243821 = VECTOR('',#243822,1.); +#243822 = DIRECTION('',(0.,0.,1.)); +#243823 = ORIENTED_EDGE('',*,*,#243824,.F.); +#243824 = EDGE_CURVE('',#243786,#243817,#243825,.T.); +#243825 = LINE('',#243826,#243827); +#243826 = CARTESIAN_POINT('',(134.316853,-78.401803,1.51)); +#243827 = VECTOR('',#243828,1.); +#243828 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243829 = PLANE('',#243830); +#243830 = AXIS2_PLACEMENT_3D('',#243831,#243832,#243833); +#243831 = CARTESIAN_POINT('',(134.316853,-78.401803,1.51)); +#243832 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#243833 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#243834 = ADVANCED_FACE('',(#243835),#243860,.T.); +#243835 = FACE_BOUND('',#243836,.T.); +#243836 = EDGE_LOOP('',(#243837,#243838,#243846,#243854)); +#243837 = ORIENTED_EDGE('',*,*,#243816,.T.); +#243838 = ORIENTED_EDGE('',*,*,#243839,.T.); +#243839 = EDGE_CURVE('',#243809,#243840,#243842,.T.); +#243840 = VERTEX_POINT('',#243841); +#243841 = CARTESIAN_POINT('',(134.3,-77.941418,1.545)); +#243842 = LINE('',#243843,#243844); +#243843 = CARTESIAN_POINT('',(134.301921,-78.365755,1.545)); +#243844 = VECTOR('',#243845,1.); +#243845 = DIRECTION('',(-4.52701582826E-03,0.999989753011,0.)); +#243846 = ORIENTED_EDGE('',*,*,#243847,.F.); +#243847 = EDGE_CURVE('',#243848,#243840,#243850,.T.); +#243848 = VERTEX_POINT('',#243849); +#243849 = CARTESIAN_POINT('',(134.3,-77.941418,1.51)); +#243850 = LINE('',#243851,#243852); +#243851 = CARTESIAN_POINT('',(134.3,-77.941418,1.51)); +#243852 = VECTOR('',#243853,1.); +#243853 = DIRECTION('',(0.,0.,1.)); +#243854 = ORIENTED_EDGE('',*,*,#243855,.F.); +#243855 = EDGE_CURVE('',#243817,#243848,#243856,.T.); +#243856 = LINE('',#243857,#243858); +#243857 = CARTESIAN_POINT('',(134.301921,-78.365755,1.51)); +#243858 = VECTOR('',#243859,1.); +#243859 = DIRECTION('',(-4.52701582826E-03,0.999989753011,0.)); +#243860 = PLANE('',#243861); +#243861 = AXIS2_PLACEMENT_3D('',#243862,#243863,#243864); +#243862 = CARTESIAN_POINT('',(134.301921,-78.365755,1.51)); +#243863 = DIRECTION('',(-0.999989753011,-4.52701582826E-03,0.)); +#243864 = DIRECTION('',(-4.52701582826E-03,0.999989753011,0.)); +#243865 = ADVANCED_FACE('',(#243866),#243891,.T.); +#243866 = FACE_BOUND('',#243867,.T.); +#243867 = EDGE_LOOP('',(#243868,#243869,#243877,#243885)); +#243868 = ORIENTED_EDGE('',*,*,#243847,.T.); +#243869 = ORIENTED_EDGE('',*,*,#243870,.T.); +#243870 = EDGE_CURVE('',#243840,#243871,#243873,.T.); +#243871 = VERTEX_POINT('',#243872); +#243872 = CARTESIAN_POINT('',(134.266853,-77.905556,1.545)); +#243873 = LINE('',#243874,#243875); +#243874 = CARTESIAN_POINT('',(134.3,-77.941418,1.545)); +#243875 = VECTOR('',#243876,1.); +#243876 = DIRECTION('',(-0.678762188069,0.734358149712,0.)); +#243877 = ORIENTED_EDGE('',*,*,#243878,.F.); +#243878 = EDGE_CURVE('',#243879,#243871,#243881,.T.); +#243879 = VERTEX_POINT('',#243880); +#243880 = CARTESIAN_POINT('',(134.266853,-77.905556,1.51)); +#243881 = LINE('',#243882,#243883); +#243882 = CARTESIAN_POINT('',(134.266853,-77.905556,1.51)); +#243883 = VECTOR('',#243884,1.); +#243884 = DIRECTION('',(0.,0.,1.)); +#243885 = ORIENTED_EDGE('',*,*,#243886,.F.); +#243886 = EDGE_CURVE('',#243848,#243879,#243887,.T.); +#243887 = LINE('',#243888,#243889); +#243888 = CARTESIAN_POINT('',(134.3,-77.941418,1.51)); +#243889 = VECTOR('',#243890,1.); +#243890 = DIRECTION('',(-0.678762188069,0.734358149712,0.)); +#243891 = PLANE('',#243892); +#243892 = AXIS2_PLACEMENT_3D('',#243893,#243894,#243895); +#243893 = CARTESIAN_POINT('',(134.3,-77.941418,1.51)); +#243894 = DIRECTION('',(-0.734358149712,-0.678762188069,0.)); +#243895 = DIRECTION('',(-0.678762188069,0.734358149712,0.)); +#243896 = ADVANCED_FACE('',(#243897),#243922,.T.); +#243897 = FACE_BOUND('',#243898,.T.); +#243898 = EDGE_LOOP('',(#243899,#243900,#243908,#243916)); +#243899 = ORIENTED_EDGE('',*,*,#243878,.T.); +#243900 = ORIENTED_EDGE('',*,*,#243901,.T.); +#243901 = EDGE_CURVE('',#243871,#243902,#243904,.T.); +#243902 = VERTEX_POINT('',#243903); +#243903 = CARTESIAN_POINT('',(134.251921,-77.869507,1.545)); +#243904 = LINE('',#243905,#243906); +#243905 = CARTESIAN_POINT('',(134.266853,-77.905556,1.545)); +#243906 = VECTOR('',#243907,1.); +#243907 = DIRECTION('',(-0.382683766837,0.923879393968,0.)); +#243908 = ORIENTED_EDGE('',*,*,#243909,.F.); +#243909 = EDGE_CURVE('',#243910,#243902,#243912,.T.); +#243910 = VERTEX_POINT('',#243911); +#243911 = CARTESIAN_POINT('',(134.251921,-77.869507,1.51)); +#243912 = LINE('',#243913,#243914); +#243913 = CARTESIAN_POINT('',(134.251921,-77.869507,1.51)); +#243914 = VECTOR('',#243915,1.); +#243915 = DIRECTION('',(0.,0.,1.)); +#243916 = ORIENTED_EDGE('',*,*,#243917,.F.); +#243917 = EDGE_CURVE('',#243879,#243910,#243918,.T.); +#243918 = LINE('',#243919,#243920); +#243919 = CARTESIAN_POINT('',(134.266853,-77.905556,1.51)); +#243920 = VECTOR('',#243921,1.); +#243921 = DIRECTION('',(-0.382683766837,0.923879393968,0.)); +#243922 = PLANE('',#243923); +#243923 = AXIS2_PLACEMENT_3D('',#243924,#243925,#243926); +#243924 = CARTESIAN_POINT('',(134.266853,-77.905556,1.51)); +#243925 = DIRECTION('',(-0.923879393968,-0.382683766837,0.)); +#243926 = DIRECTION('',(-0.382683766837,0.923879393968,0.)); +#243927 = ADVANCED_FACE('',(#243928),#243953,.T.); +#243928 = FACE_BOUND('',#243929,.T.); +#243929 = EDGE_LOOP('',(#243930,#243931,#243939,#243947)); +#243930 = ORIENTED_EDGE('',*,*,#243909,.T.); +#243931 = ORIENTED_EDGE('',*,*,#243932,.T.); +#243932 = EDGE_CURVE('',#243902,#243933,#243935,.T.); +#243933 = VERTEX_POINT('',#243934); +#243934 = CARTESIAN_POINT('',(134.25,-73.891422,1.545)); +#243935 = LINE('',#243936,#243937); +#243936 = CARTESIAN_POINT('',(134.251921,-77.869507,1.545)); +#243937 = VECTOR('',#243938,1.); +#243938 = DIRECTION('',(-4.828956083223E-04,0.999999883406,0.)); +#243939 = ORIENTED_EDGE('',*,*,#243940,.F.); +#243940 = EDGE_CURVE('',#243941,#243933,#243943,.T.); +#243941 = VERTEX_POINT('',#243942); +#243942 = CARTESIAN_POINT('',(134.25,-73.891422,1.51)); +#243943 = LINE('',#243944,#243945); +#243944 = CARTESIAN_POINT('',(134.25,-73.891422,1.51)); +#243945 = VECTOR('',#243946,1.); +#243946 = DIRECTION('',(0.,0.,1.)); +#243947 = ORIENTED_EDGE('',*,*,#243948,.F.); +#243948 = EDGE_CURVE('',#243910,#243941,#243949,.T.); +#243949 = LINE('',#243950,#243951); +#243950 = CARTESIAN_POINT('',(134.251921,-77.869507,1.51)); +#243951 = VECTOR('',#243952,1.); +#243952 = DIRECTION('',(-4.828956083223E-04,0.999999883406,0.)); +#243953 = PLANE('',#243954); +#243954 = AXIS2_PLACEMENT_3D('',#243955,#243956,#243957); +#243955 = CARTESIAN_POINT('',(134.251921,-77.869507,1.51)); +#243956 = DIRECTION('',(-0.999999883406,-4.828956083223E-04,0.)); +#243957 = DIRECTION('',(-4.828956083223E-04,0.999999883406,0.)); +#243958 = ADVANCED_FACE('',(#243959),#243984,.T.); +#243959 = FACE_BOUND('',#243960,.T.); +#243960 = EDGE_LOOP('',(#243961,#243962,#243970,#243978)); +#243961 = ORIENTED_EDGE('',*,*,#243940,.T.); +#243962 = ORIENTED_EDGE('',*,*,#243963,.T.); +#243963 = EDGE_CURVE('',#243933,#243964,#243966,.T.); +#243964 = VERTEX_POINT('',#243965); +#243965 = CARTESIAN_POINT('',(130.188578,-69.83,1.545)); +#243966 = LINE('',#243967,#243968); +#243967 = CARTESIAN_POINT('',(134.25,-73.891422,1.545)); +#243968 = VECTOR('',#243969,1.); +#243969 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243970 = ORIENTED_EDGE('',*,*,#243971,.F.); +#243971 = EDGE_CURVE('',#243972,#243964,#243974,.T.); +#243972 = VERTEX_POINT('',#243973); +#243973 = CARTESIAN_POINT('',(130.188578,-69.83,1.51)); +#243974 = LINE('',#243975,#243976); +#243975 = CARTESIAN_POINT('',(130.188578,-69.83,1.51)); +#243976 = VECTOR('',#243977,1.); +#243977 = DIRECTION('',(0.,0.,1.)); +#243978 = ORIENTED_EDGE('',*,*,#243979,.F.); +#243979 = EDGE_CURVE('',#243941,#243972,#243980,.T.); +#243980 = LINE('',#243981,#243982); +#243981 = CARTESIAN_POINT('',(134.25,-73.891422,1.51)); +#243982 = VECTOR('',#243983,1.); +#243983 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243984 = PLANE('',#243985); +#243985 = AXIS2_PLACEMENT_3D('',#243986,#243987,#243988); +#243986 = CARTESIAN_POINT('',(134.25,-73.891422,1.51)); +#243987 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#243988 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#243989 = ADVANCED_FACE('',(#243990),#244006,.T.); +#243990 = FACE_BOUND('',#243991,.T.); +#243991 = EDGE_LOOP('',(#243992,#243993,#243999,#244000)); +#243992 = ORIENTED_EDGE('',*,*,#243971,.T.); +#243993 = ORIENTED_EDGE('',*,*,#243994,.T.); +#243994 = EDGE_CURVE('',#243964,#242991,#243995,.T.); +#243995 = LINE('',#243996,#243997); +#243996 = CARTESIAN_POINT('',(130.188578,-69.83,1.545)); +#243997 = VECTOR('',#243998,1.); +#243998 = DIRECTION('',(-0.999997989919,2.005033090555E-03,0.)); +#243999 = ORIENTED_EDGE('',*,*,#242988,.F.); +#244000 = ORIENTED_EDGE('',*,*,#244001,.F.); +#244001 = EDGE_CURVE('',#243972,#242989,#244002,.T.); +#244002 = LINE('',#244003,#244004); +#244003 = CARTESIAN_POINT('',(130.188578,-69.83,1.51)); +#244004 = VECTOR('',#244005,1.); +#244005 = DIRECTION('',(-0.999997989919,2.005033090555E-03,0.)); +#244006 = PLANE('',#244007); +#244007 = AXIS2_PLACEMENT_3D('',#244008,#244009,#244010); +#244008 = CARTESIAN_POINT('',(130.188578,-69.83,1.51)); +#244009 = DIRECTION('',(-2.005033090555E-03,-0.999997989919,0.)); +#244010 = DIRECTION('',(-0.999997989919,2.005033090555E-03,0.)); +#244011 = ADVANCED_FACE('',(#244012),#244039,.F.); +#244012 = FACE_BOUND('',#244013,.T.); +#244013 = EDGE_LOOP('',(#244014,#244024,#244031,#244032)); +#244014 = ORIENTED_EDGE('',*,*,#244015,.T.); +#244015 = EDGE_CURVE('',#244016,#244018,#244020,.T.); +#244016 = VERTEX_POINT('',#244017); +#244017 = CARTESIAN_POINT('',(137.637255,-81.,1.51)); +#244018 = VERTEX_POINT('',#244019); +#244019 = CARTESIAN_POINT('',(137.637255,-81.,1.545)); +#244020 = LINE('',#244021,#244022); +#244021 = CARTESIAN_POINT('',(137.637255,-81.,1.51)); +#244022 = VECTOR('',#244023,1.); +#244023 = DIRECTION('',(0.,0.,1.)); +#244024 = ORIENTED_EDGE('',*,*,#244025,.T.); +#244025 = EDGE_CURVE('',#244018,#244018,#244026,.T.); +#244026 = CIRCLE('',#244027,0.137255); +#244027 = AXIS2_PLACEMENT_3D('',#244028,#244029,#244030); +#244028 = CARTESIAN_POINT('',(137.5,-81.,1.545)); +#244029 = DIRECTION('',(0.,0.,1.)); +#244030 = DIRECTION('',(1.,0.,-0.)); +#244031 = ORIENTED_EDGE('',*,*,#244015,.F.); +#244032 = ORIENTED_EDGE('',*,*,#244033,.F.); +#244033 = EDGE_CURVE('',#244016,#244016,#244034,.T.); +#244034 = CIRCLE('',#244035,0.137255); +#244035 = AXIS2_PLACEMENT_3D('',#244036,#244037,#244038); +#244036 = CARTESIAN_POINT('',(137.5,-81.,1.51)); +#244037 = DIRECTION('',(0.,0.,1.)); +#244038 = DIRECTION('',(1.,0.,-0.)); +#244039 = CYLINDRICAL_SURFACE('',#244040,0.137255); +#244040 = AXIS2_PLACEMENT_3D('',#244041,#244042,#244043); +#244041 = CARTESIAN_POINT('',(137.5,-81.,1.51)); +#244042 = DIRECTION('',(-0.,-0.,-1.)); +#244043 = DIRECTION('',(1.,0.,-0.)); +#244044 = ADVANCED_FACE('',(#244045,#244080),#244083,.F.); +#244045 = FACE_BOUND('',#244046,.T.); +#244046 = EDGE_LOOP('',(#244047,#244048,#244049,#244050,#244051,#244052, + #244053,#244054,#244055,#244056,#244057,#244058,#244059,#244060, + #244061,#244062,#244063,#244064,#244065,#244066,#244067,#244068, + #244069,#244070,#244071,#244072,#244073,#244074,#244075,#244076, + #244077,#244078,#244079)); +#244047 = ORIENTED_EDGE('',*,*,#243015,.T.); +#244048 = ORIENTED_EDGE('',*,*,#243047,.T.); +#244049 = ORIENTED_EDGE('',*,*,#243078,.T.); +#244050 = ORIENTED_EDGE('',*,*,#243109,.T.); +#244051 = ORIENTED_EDGE('',*,*,#243140,.T.); +#244052 = ORIENTED_EDGE('',*,*,#243171,.T.); +#244053 = ORIENTED_EDGE('',*,*,#243202,.T.); +#244054 = ORIENTED_EDGE('',*,*,#243233,.T.); +#244055 = ORIENTED_EDGE('',*,*,#243264,.T.); +#244056 = ORIENTED_EDGE('',*,*,#243295,.T.); +#244057 = ORIENTED_EDGE('',*,*,#243326,.T.); +#244058 = ORIENTED_EDGE('',*,*,#243357,.T.); +#244059 = ORIENTED_EDGE('',*,*,#243388,.T.); +#244060 = ORIENTED_EDGE('',*,*,#243419,.T.); +#244061 = ORIENTED_EDGE('',*,*,#243450,.T.); +#244062 = ORIENTED_EDGE('',*,*,#243481,.T.); +#244063 = ORIENTED_EDGE('',*,*,#243512,.T.); +#244064 = ORIENTED_EDGE('',*,*,#243544,.T.); +#244065 = ORIENTED_EDGE('',*,*,#243576,.T.); +#244066 = ORIENTED_EDGE('',*,*,#243607,.T.); +#244067 = ORIENTED_EDGE('',*,*,#243638,.T.); +#244068 = ORIENTED_EDGE('',*,*,#243669,.T.); +#244069 = ORIENTED_EDGE('',*,*,#243700,.T.); +#244070 = ORIENTED_EDGE('',*,*,#243731,.T.); +#244071 = ORIENTED_EDGE('',*,*,#243762,.T.); +#244072 = ORIENTED_EDGE('',*,*,#243793,.T.); +#244073 = ORIENTED_EDGE('',*,*,#243824,.T.); +#244074 = ORIENTED_EDGE('',*,*,#243855,.T.); +#244075 = ORIENTED_EDGE('',*,*,#243886,.T.); +#244076 = ORIENTED_EDGE('',*,*,#243917,.T.); +#244077 = ORIENTED_EDGE('',*,*,#243948,.T.); +#244078 = ORIENTED_EDGE('',*,*,#243979,.T.); +#244079 = ORIENTED_EDGE('',*,*,#244001,.T.); +#244080 = FACE_BOUND('',#244081,.T.); +#244081 = EDGE_LOOP('',(#244082)); +#244082 = ORIENTED_EDGE('',*,*,#244033,.T.); +#244083 = PLANE('',#244084); +#244084 = AXIS2_PLACEMENT_3D('',#244085,#244086,#244087); +#244085 = CARTESIAN_POINT('',(0.,0.,1.51)); +#244086 = DIRECTION('',(0.,0.,1.)); +#244087 = DIRECTION('',(1.,0.,-0.)); +#244088 = ADVANCED_FACE('',(#244089,#244124),#244127,.T.); +#244089 = FACE_BOUND('',#244090,.F.); +#244090 = EDGE_LOOP('',(#244091,#244092,#244093,#244094,#244095,#244096, + #244097,#244098,#244099,#244100,#244101,#244102,#244103,#244104, + #244105,#244106,#244107,#244108,#244109,#244110,#244111,#244112, + #244113,#244114,#244115,#244116,#244117,#244118,#244119,#244120, + #244121,#244122,#244123)); +#244091 = ORIENTED_EDGE('',*,*,#242998,.T.); +#244092 = ORIENTED_EDGE('',*,*,#243031,.T.); +#244093 = ORIENTED_EDGE('',*,*,#243062,.T.); +#244094 = ORIENTED_EDGE('',*,*,#243093,.T.); +#244095 = ORIENTED_EDGE('',*,*,#243124,.T.); +#244096 = ORIENTED_EDGE('',*,*,#243155,.T.); +#244097 = ORIENTED_EDGE('',*,*,#243186,.T.); +#244098 = ORIENTED_EDGE('',*,*,#243217,.T.); +#244099 = ORIENTED_EDGE('',*,*,#243248,.T.); +#244100 = ORIENTED_EDGE('',*,*,#243279,.T.); +#244101 = ORIENTED_EDGE('',*,*,#243310,.T.); +#244102 = ORIENTED_EDGE('',*,*,#243341,.T.); +#244103 = ORIENTED_EDGE('',*,*,#243372,.T.); +#244104 = ORIENTED_EDGE('',*,*,#243403,.T.); +#244105 = ORIENTED_EDGE('',*,*,#243434,.T.); +#244106 = ORIENTED_EDGE('',*,*,#243465,.T.); +#244107 = ORIENTED_EDGE('',*,*,#243496,.T.); +#244108 = ORIENTED_EDGE('',*,*,#243527,.T.); +#244109 = ORIENTED_EDGE('',*,*,#243560,.T.); +#244110 = ORIENTED_EDGE('',*,*,#243591,.T.); +#244111 = ORIENTED_EDGE('',*,*,#243622,.T.); +#244112 = ORIENTED_EDGE('',*,*,#243653,.T.); +#244113 = ORIENTED_EDGE('',*,*,#243684,.T.); +#244114 = ORIENTED_EDGE('',*,*,#243715,.T.); +#244115 = ORIENTED_EDGE('',*,*,#243746,.T.); +#244116 = ORIENTED_EDGE('',*,*,#243777,.T.); +#244117 = ORIENTED_EDGE('',*,*,#243808,.T.); +#244118 = ORIENTED_EDGE('',*,*,#243839,.T.); +#244119 = ORIENTED_EDGE('',*,*,#243870,.T.); +#244120 = ORIENTED_EDGE('',*,*,#243901,.T.); +#244121 = ORIENTED_EDGE('',*,*,#243932,.T.); +#244122 = ORIENTED_EDGE('',*,*,#243963,.T.); +#244123 = ORIENTED_EDGE('',*,*,#243994,.T.); +#244124 = FACE_BOUND('',#244125,.F.); +#244125 = EDGE_LOOP('',(#244126)); +#244126 = ORIENTED_EDGE('',*,*,#244025,.T.); +#244127 = PLANE('',#244128); +#244128 = AXIS2_PLACEMENT_3D('',#244129,#244130,#244131); +#244129 = CARTESIAN_POINT('',(0.,0.,1.545)); +#244130 = DIRECTION('',(0.,0.,1.)); +#244131 = DIRECTION('',(1.,0.,-0.)); +#244132 = MANIFOLD_SOLID_BREP('',#244133); +#244133 = CLOSED_SHELL('',(#244134,#244174,#244205,#244236,#244267, + #244298,#244329,#244360,#244393,#244415,#244448,#244468)); +#244134 = ADVANCED_FACE('',(#244135),#244169,.F.); +#244135 = FACE_BOUND('',#244136,.F.); +#244136 = EDGE_LOOP('',(#244137,#244147,#244155,#244163)); +#244137 = ORIENTED_EDGE('',*,*,#244138,.T.); +#244138 = EDGE_CURVE('',#244139,#244141,#244143,.T.); +#244139 = VERTEX_POINT('',#244140); +#244140 = CARTESIAN_POINT('',(137.6,-81.28113,0.)); +#244141 = VERTEX_POINT('',#244142); +#244142 = CARTESIAN_POINT('',(137.6,-81.28113,-3.5E-02)); +#244143 = LINE('',#244144,#244145); +#244144 = CARTESIAN_POINT('',(137.6,-81.28113,0.)); +#244145 = VECTOR('',#244146,1.); +#244146 = DIRECTION('',(0.,0.,-1.)); +#244147 = ORIENTED_EDGE('',*,*,#244148,.T.); +#244148 = EDGE_CURVE('',#244141,#244149,#244151,.T.); +#244149 = VERTEX_POINT('',#244150); +#244150 = CARTESIAN_POINT('',(137.598268,-86.020401,-3.5E-02)); +#244151 = LINE('',#244152,#244153); +#244152 = CARTESIAN_POINT('',(137.6,-81.28113,-3.5E-02)); +#244153 = VECTOR('',#244154,1.); +#244154 = DIRECTION('',(-3.654570258468E-04,-0.999999933221,0.)); +#244155 = ORIENTED_EDGE('',*,*,#244156,.F.); +#244156 = EDGE_CURVE('',#244157,#244149,#244159,.T.); +#244157 = VERTEX_POINT('',#244158); +#244158 = CARTESIAN_POINT('',(137.598268,-86.020401,0.)); +#244159 = LINE('',#244160,#244161); +#244160 = CARTESIAN_POINT('',(137.598268,-86.020401,0.)); +#244161 = VECTOR('',#244162,1.); +#244162 = DIRECTION('',(0.,0.,-1.)); +#244163 = ORIENTED_EDGE('',*,*,#244164,.F.); +#244164 = EDGE_CURVE('',#244139,#244157,#244165,.T.); +#244165 = LINE('',#244166,#244167); +#244166 = CARTESIAN_POINT('',(137.6,-81.28113,0.)); +#244167 = VECTOR('',#244168,1.); +#244168 = DIRECTION('',(-3.654570258468E-04,-0.999999933221,0.)); +#244169 = PLANE('',#244170); +#244170 = AXIS2_PLACEMENT_3D('',#244171,#244172,#244173); +#244171 = CARTESIAN_POINT('',(137.6,-81.28113,0.)); +#244172 = DIRECTION('',(-0.999999933221,3.654570258468E-04,0.)); +#244173 = DIRECTION('',(-3.654570258468E-04,-0.999999933221,0.)); +#244174 = ADVANCED_FACE('',(#244175),#244200,.F.); +#244175 = FACE_BOUND('',#244176,.F.); +#244176 = EDGE_LOOP('',(#244177,#244178,#244186,#244194)); +#244177 = ORIENTED_EDGE('',*,*,#244156,.T.); +#244178 = ORIENTED_EDGE('',*,*,#244179,.T.); +#244179 = EDGE_CURVE('',#244149,#244180,#244182,.T.); +#244180 = VERTEX_POINT('',#244181); +#244181 = CARTESIAN_POINT('',(137.566479,-86.011883,-3.5E-02)); +#244182 = LINE('',#244183,#244184); +#244183 = CARTESIAN_POINT('',(137.598268,-86.020401,-3.5E-02)); +#244184 = VECTOR('',#244185,1.); +#244185 = DIRECTION('',(-0.965924587144,0.258823669612,0.)); +#244186 = ORIENTED_EDGE('',*,*,#244187,.F.); +#244187 = EDGE_CURVE('',#244188,#244180,#244190,.T.); +#244188 = VERTEX_POINT('',#244189); +#244189 = CARTESIAN_POINT('',(137.566479,-86.011883,0.)); +#244190 = LINE('',#244191,#244192); +#244191 = CARTESIAN_POINT('',(137.566479,-86.011883,0.)); +#244192 = VECTOR('',#244193,1.); +#244193 = DIRECTION('',(0.,0.,-1.)); +#244194 = ORIENTED_EDGE('',*,*,#244195,.F.); +#244195 = EDGE_CURVE('',#244157,#244188,#244196,.T.); +#244196 = LINE('',#244197,#244198); +#244197 = CARTESIAN_POINT('',(137.598268,-86.020401,0.)); +#244198 = VECTOR('',#244199,1.); +#244199 = DIRECTION('',(-0.965924587144,0.258823669612,0.)); +#244200 = PLANE('',#244201); +#244201 = AXIS2_PLACEMENT_3D('',#244202,#244203,#244204); +#244202 = CARTESIAN_POINT('',(137.598268,-86.020401,0.)); +#244203 = DIRECTION('',(0.258823669612,0.965924587144,0.)); +#244204 = DIRECTION('',(-0.965924587144,0.258823669612,0.)); +#244205 = ADVANCED_FACE('',(#244206),#244231,.F.); +#244206 = FACE_BOUND('',#244207,.F.); +#244207 = EDGE_LOOP('',(#244208,#244209,#244217,#244225)); +#244208 = ORIENTED_EDGE('',*,*,#244187,.T.); +#244209 = ORIENTED_EDGE('',*,*,#244210,.T.); +#244210 = EDGE_CURVE('',#244180,#244211,#244213,.T.); +#244211 = VERTEX_POINT('',#244212); +#244212 = CARTESIAN_POINT('',(137.5,-86.007526,-3.5E-02)); +#244213 = LINE('',#244214,#244215); +#244214 = CARTESIAN_POINT('',(137.566479,-86.011883,-3.5E-02)); +#244215 = VECTOR('',#244216,1.); +#244216 = DIRECTION('',(-0.997859181715,6.539918552822E-02,0.)); +#244217 = ORIENTED_EDGE('',*,*,#244218,.F.); +#244218 = EDGE_CURVE('',#244219,#244211,#244221,.T.); +#244219 = VERTEX_POINT('',#244220); +#244220 = CARTESIAN_POINT('',(137.5,-86.007526,0.)); +#244221 = LINE('',#244222,#244223); +#244222 = CARTESIAN_POINT('',(137.5,-86.007526,0.)); +#244223 = VECTOR('',#244224,1.); +#244224 = DIRECTION('',(0.,0.,-1.)); +#244225 = ORIENTED_EDGE('',*,*,#244226,.F.); +#244226 = EDGE_CURVE('',#244188,#244219,#244227,.T.); +#244227 = LINE('',#244228,#244229); +#244228 = CARTESIAN_POINT('',(137.566479,-86.011883,0.)); +#244229 = VECTOR('',#244230,1.); +#244230 = DIRECTION('',(-0.997859181715,6.539918552822E-02,0.)); +#244231 = PLANE('',#244232); +#244232 = AXIS2_PLACEMENT_3D('',#244233,#244234,#244235); +#244233 = CARTESIAN_POINT('',(137.566479,-86.011883,0.)); +#244234 = DIRECTION('',(6.539918552822E-02,0.997859181715,0.)); +#244235 = DIRECTION('',(-0.997859181715,6.539918552822E-02,0.)); +#244236 = ADVANCED_FACE('',(#244237),#244262,.F.); +#244237 = FACE_BOUND('',#244238,.F.); +#244238 = EDGE_LOOP('',(#244239,#244240,#244248,#244256)); +#244239 = ORIENTED_EDGE('',*,*,#244218,.T.); +#244240 = ORIENTED_EDGE('',*,*,#244241,.T.); +#244241 = EDGE_CURVE('',#244211,#244242,#244244,.T.); +#244242 = VERTEX_POINT('',#244243); +#244243 = CARTESIAN_POINT('',(137.43352,-86.011883,-3.5E-02)); +#244244 = LINE('',#244245,#244246); +#244245 = CARTESIAN_POINT('',(137.5,-86.007526,-3.5E-02)); +#244246 = VECTOR('',#244247,1.); +#244247 = DIRECTION('',(-0.997859245912,-6.539820599336E-02,0.)); +#244248 = ORIENTED_EDGE('',*,*,#244249,.F.); +#244249 = EDGE_CURVE('',#244250,#244242,#244252,.T.); +#244250 = VERTEX_POINT('',#244251); +#244251 = CARTESIAN_POINT('',(137.43352,-86.011883,0.)); +#244252 = LINE('',#244253,#244254); +#244253 = CARTESIAN_POINT('',(137.43352,-86.011883,0.)); +#244254 = VECTOR('',#244255,1.); +#244255 = DIRECTION('',(0.,0.,-1.)); +#244256 = ORIENTED_EDGE('',*,*,#244257,.F.); +#244257 = EDGE_CURVE('',#244219,#244250,#244258,.T.); +#244258 = LINE('',#244259,#244260); +#244259 = CARTESIAN_POINT('',(137.5,-86.007526,0.)); +#244260 = VECTOR('',#244261,1.); +#244261 = DIRECTION('',(-0.997859245912,-6.539820599336E-02,0.)); +#244262 = PLANE('',#244263); +#244263 = AXIS2_PLACEMENT_3D('',#244264,#244265,#244266); +#244264 = CARTESIAN_POINT('',(137.5,-86.007526,0.)); +#244265 = DIRECTION('',(-6.539820599336E-02,0.997859245912,0.)); +#244266 = DIRECTION('',(-0.997859245912,-6.539820599336E-02,0.)); +#244267 = ADVANCED_FACE('',(#244268),#244293,.F.); +#244268 = FACE_BOUND('',#244269,.F.); +#244269 = EDGE_LOOP('',(#244270,#244271,#244279,#244287)); +#244270 = ORIENTED_EDGE('',*,*,#244249,.T.); +#244271 = ORIENTED_EDGE('',*,*,#244272,.T.); +#244272 = EDGE_CURVE('',#244242,#244273,#244275,.T.); +#244273 = VERTEX_POINT('',#244274); +#244274 = CARTESIAN_POINT('',(137.401731,-86.0204,-3.5E-02)); +#244275 = LINE('',#244276,#244277); +#244276 = CARTESIAN_POINT('',(137.43352,-86.011883,-3.5E-02)); +#244277 = VECTOR('',#244278,1.); +#244278 = DIRECTION('',(-0.965932183288,-0.258795319295,0.)); +#244279 = ORIENTED_EDGE('',*,*,#244280,.F.); +#244280 = EDGE_CURVE('',#244281,#244273,#244283,.T.); +#244281 = VERTEX_POINT('',#244282); +#244282 = CARTESIAN_POINT('',(137.401731,-86.0204,0.)); +#244283 = LINE('',#244284,#244285); +#244284 = CARTESIAN_POINT('',(137.401731,-86.0204,0.)); +#244285 = VECTOR('',#244286,1.); +#244286 = DIRECTION('',(0.,0.,-1.)); +#244287 = ORIENTED_EDGE('',*,*,#244288,.F.); +#244288 = EDGE_CURVE('',#244250,#244281,#244289,.T.); +#244289 = LINE('',#244290,#244291); +#244290 = CARTESIAN_POINT('',(137.43352,-86.011883,0.)); +#244291 = VECTOR('',#244292,1.); +#244292 = DIRECTION('',(-0.965932183288,-0.258795319295,0.)); +#244293 = PLANE('',#244294); +#244294 = AXIS2_PLACEMENT_3D('',#244295,#244296,#244297); +#244295 = CARTESIAN_POINT('',(137.43352,-86.011883,0.)); +#244296 = DIRECTION('',(-0.258795319295,0.965932183288,0.)); +#244297 = DIRECTION('',(-0.965932183288,-0.258795319295,0.)); +#244298 = ADVANCED_FACE('',(#244299),#244324,.F.); +#244299 = FACE_BOUND('',#244300,.F.); +#244300 = EDGE_LOOP('',(#244301,#244302,#244310,#244318)); +#244301 = ORIENTED_EDGE('',*,*,#244280,.T.); +#244302 = ORIENTED_EDGE('',*,*,#244303,.T.); +#244303 = EDGE_CURVE('',#244273,#244304,#244306,.T.); +#244304 = VERTEX_POINT('',#244305); +#244305 = CARTESIAN_POINT('',(137.4,-81.28113,-3.5E-02)); +#244306 = LINE('',#244307,#244308); +#244307 = CARTESIAN_POINT('',(137.401731,-86.0204,-3.5E-02)); +#244308 = VECTOR('',#244309,1.); +#244309 = DIRECTION('',(-3.652461000417E-04,0.999999933298,0.)); +#244310 = ORIENTED_EDGE('',*,*,#244311,.F.); +#244311 = EDGE_CURVE('',#244312,#244304,#244314,.T.); +#244312 = VERTEX_POINT('',#244313); +#244313 = CARTESIAN_POINT('',(137.4,-81.28113,0.)); +#244314 = LINE('',#244315,#244316); +#244315 = CARTESIAN_POINT('',(137.4,-81.28113,0.)); +#244316 = VECTOR('',#244317,1.); +#244317 = DIRECTION('',(0.,0.,-1.)); +#244318 = ORIENTED_EDGE('',*,*,#244319,.F.); +#244319 = EDGE_CURVE('',#244281,#244312,#244320,.T.); +#244320 = LINE('',#244321,#244322); +#244321 = CARTESIAN_POINT('',(137.401731,-86.0204,0.)); +#244322 = VECTOR('',#244323,1.); +#244323 = DIRECTION('',(-3.652461000417E-04,0.999999933298,0.)); +#244324 = PLANE('',#244325); +#244325 = AXIS2_PLACEMENT_3D('',#244326,#244327,#244328); +#244326 = CARTESIAN_POINT('',(137.401731,-86.0204,0.)); +#244327 = DIRECTION('',(0.999999933298,3.652461000417E-04,0.)); +#244328 = DIRECTION('',(-3.652461000417E-04,0.999999933298,0.)); +#244329 = ADVANCED_FACE('',(#244330),#244355,.F.); +#244330 = FACE_BOUND('',#244331,.F.); +#244331 = EDGE_LOOP('',(#244332,#244333,#244341,#244349)); +#244332 = ORIENTED_EDGE('',*,*,#244311,.T.); +#244333 = ORIENTED_EDGE('',*,*,#244334,.T.); +#244334 = EDGE_CURVE('',#244304,#244335,#244337,.T.); +#244335 = VERTEX_POINT('',#244336); +#244336 = CARTESIAN_POINT('',(137.385195,-81.277164,-3.5E-02)); +#244337 = LINE('',#244338,#244339); +#244338 = CARTESIAN_POINT('',(137.4,-81.28113,-3.5E-02)); +#244339 = VECTOR('',#244340,1.); +#244340 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#244341 = ORIENTED_EDGE('',*,*,#244342,.F.); +#244342 = EDGE_CURVE('',#244343,#244335,#244345,.T.); +#244343 = VERTEX_POINT('',#244344); +#244344 = CARTESIAN_POINT('',(137.385195,-81.277164,0.)); +#244345 = LINE('',#244346,#244347); +#244346 = CARTESIAN_POINT('',(137.385195,-81.277164,0.)); +#244347 = VECTOR('',#244348,1.); +#244348 = DIRECTION('',(0.,0.,-1.)); +#244349 = ORIENTED_EDGE('',*,*,#244350,.F.); +#244350 = EDGE_CURVE('',#244312,#244343,#244351,.T.); +#244351 = LINE('',#244352,#244353); +#244352 = CARTESIAN_POINT('',(137.4,-81.28113,0.)); +#244353 = VECTOR('',#244354,1.); +#244354 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#244355 = PLANE('',#244356); +#244356 = AXIS2_PLACEMENT_3D('',#244357,#244358,#244359); +#244357 = CARTESIAN_POINT('',(137.4,-81.28113,0.)); +#244358 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#244359 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#244360 = ADVANCED_FACE('',(#244361),#244388,.T.); +#244361 = FACE_BOUND('',#244362,.F.); +#244362 = EDGE_LOOP('',(#244363,#244364,#244373,#244381)); +#244363 = ORIENTED_EDGE('',*,*,#244342,.T.); +#244364 = ORIENTED_EDGE('',*,*,#244365,.T.); +#244365 = EDGE_CURVE('',#244335,#244366,#244368,.T.); +#244366 = VERTEX_POINT('',#244367); +#244367 = CARTESIAN_POINT('',(137.614805,-81.277164,-3.5E-02)); +#244368 = CIRCLE('',#244369,0.299999472923); +#244369 = AXIS2_PLACEMENT_3D('',#244370,#244371,#244372); +#244370 = CARTESIAN_POINT('',(137.5,-81.00000069844,-3.5E-02)); +#244371 = DIRECTION('',(0.,0.,-1.)); +#244372 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#244373 = ORIENTED_EDGE('',*,*,#244374,.F.); +#244374 = EDGE_CURVE('',#244375,#244366,#244377,.T.); +#244375 = VERTEX_POINT('',#244376); +#244376 = CARTESIAN_POINT('',(137.614805,-81.277164,0.)); +#244377 = LINE('',#244378,#244379); +#244378 = CARTESIAN_POINT('',(137.614805,-81.277164,0.)); +#244379 = VECTOR('',#244380,1.); +#244380 = DIRECTION('',(0.,0.,-1.)); +#244381 = ORIENTED_EDGE('',*,*,#244382,.F.); +#244382 = EDGE_CURVE('',#244343,#244375,#244383,.T.); +#244383 = CIRCLE('',#244384,0.299999472923); +#244384 = AXIS2_PLACEMENT_3D('',#244385,#244386,#244387); +#244385 = CARTESIAN_POINT('',(137.5,-81.00000069844,0.)); +#244386 = DIRECTION('',(0.,0.,-1.)); +#244387 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#244388 = CYLINDRICAL_SURFACE('',#244389,0.299999472923); +#244389 = AXIS2_PLACEMENT_3D('',#244390,#244391,#244392); +#244390 = CARTESIAN_POINT('',(137.5,-81.00000069844,0.)); +#244391 = DIRECTION('',(-0.,-0.,1.)); +#244392 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#244393 = ADVANCED_FACE('',(#244394),#244410,.F.); +#244394 = FACE_BOUND('',#244395,.F.); +#244395 = EDGE_LOOP('',(#244396,#244397,#244403,#244404)); +#244396 = ORIENTED_EDGE('',*,*,#244374,.T.); +#244397 = ORIENTED_EDGE('',*,*,#244398,.T.); +#244398 = EDGE_CURVE('',#244366,#244141,#244399,.T.); +#244399 = LINE('',#244400,#244401); +#244400 = CARTESIAN_POINT('',(137.614805,-81.277164,-3.5E-02)); +#244401 = VECTOR('',#244402,1.); +#244402 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#244403 = ORIENTED_EDGE('',*,*,#244138,.F.); +#244404 = ORIENTED_EDGE('',*,*,#244405,.F.); +#244405 = EDGE_CURVE('',#244375,#244139,#244406,.T.); +#244406 = LINE('',#244407,#244408); +#244407 = CARTESIAN_POINT('',(137.614805,-81.277164,0.)); +#244408 = VECTOR('',#244409,1.); +#244409 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#244410 = PLANE('',#244411); +#244411 = AXIS2_PLACEMENT_3D('',#244412,#244413,#244414); +#244412 = CARTESIAN_POINT('',(137.614805,-81.277164,0.)); +#244413 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#244414 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#244415 = ADVANCED_FACE('',(#244416),#244443,.F.); +#244416 = FACE_BOUND('',#244417,.F.); +#244417 = EDGE_LOOP('',(#244418,#244428,#244435,#244436)); +#244418 = ORIENTED_EDGE('',*,*,#244419,.T.); +#244419 = EDGE_CURVE('',#244420,#244422,#244424,.T.); +#244420 = VERTEX_POINT('',#244421); +#244421 = CARTESIAN_POINT('',(137.637255,-81.,0.)); +#244422 = VERTEX_POINT('',#244423); +#244423 = CARTESIAN_POINT('',(137.637255,-81.,-3.5E-02)); +#244424 = LINE('',#244425,#244426); +#244425 = CARTESIAN_POINT('',(137.637255,-81.,0.)); +#244426 = VECTOR('',#244427,1.); +#244427 = DIRECTION('',(0.,0.,-1.)); +#244428 = ORIENTED_EDGE('',*,*,#244429,.T.); +#244429 = EDGE_CURVE('',#244422,#244422,#244430,.T.); +#244430 = CIRCLE('',#244431,0.137255); +#244431 = AXIS2_PLACEMENT_3D('',#244432,#244433,#244434); +#244432 = CARTESIAN_POINT('',(137.5,-81.,-3.5E-02)); +#244433 = DIRECTION('',(0.,0.,1.)); +#244434 = DIRECTION('',(1.,0.,-0.)); +#244435 = ORIENTED_EDGE('',*,*,#244419,.F.); +#244436 = ORIENTED_EDGE('',*,*,#244437,.F.); +#244437 = EDGE_CURVE('',#244420,#244420,#244438,.T.); +#244438 = CIRCLE('',#244439,0.137255); +#244439 = AXIS2_PLACEMENT_3D('',#244440,#244441,#244442); +#244440 = CARTESIAN_POINT('',(137.5,-81.,0.)); +#244441 = DIRECTION('',(0.,0.,1.)); +#244442 = DIRECTION('',(1.,0.,-0.)); +#244443 = CYLINDRICAL_SURFACE('',#244444,0.137255); +#244444 = AXIS2_PLACEMENT_3D('',#244445,#244446,#244447); +#244445 = CARTESIAN_POINT('',(137.5,-81.,0.)); +#244446 = DIRECTION('',(0.,0.,1.)); +#244447 = DIRECTION('',(1.,0.,-0.)); +#244448 = ADVANCED_FACE('',(#244449,#244460),#244463,.F.); +#244449 = FACE_BOUND('',#244450,.F.); +#244450 = EDGE_LOOP('',(#244451,#244452,#244453,#244454,#244455,#244456, + #244457,#244458,#244459)); +#244451 = ORIENTED_EDGE('',*,*,#244164,.T.); +#244452 = ORIENTED_EDGE('',*,*,#244195,.T.); +#244453 = ORIENTED_EDGE('',*,*,#244226,.T.); +#244454 = ORIENTED_EDGE('',*,*,#244257,.T.); +#244455 = ORIENTED_EDGE('',*,*,#244288,.T.); +#244456 = ORIENTED_EDGE('',*,*,#244319,.T.); +#244457 = ORIENTED_EDGE('',*,*,#244350,.T.); +#244458 = ORIENTED_EDGE('',*,*,#244382,.T.); +#244459 = ORIENTED_EDGE('',*,*,#244405,.T.); +#244460 = FACE_BOUND('',#244461,.F.); +#244461 = EDGE_LOOP('',(#244462)); +#244462 = ORIENTED_EDGE('',*,*,#244437,.T.); +#244463 = PLANE('',#244464); +#244464 = AXIS2_PLACEMENT_3D('',#244465,#244466,#244467); +#244465 = CARTESIAN_POINT('',(0.,0.,0.)); +#244466 = DIRECTION('',(-0.,-0.,-1.)); +#244467 = DIRECTION('',(-1.,0.,0.)); +#244468 = ADVANCED_FACE('',(#244469,#244480),#244483,.T.); +#244469 = FACE_BOUND('',#244470,.T.); +#244470 = EDGE_LOOP('',(#244471,#244472,#244473,#244474,#244475,#244476, + #244477,#244478,#244479)); +#244471 = ORIENTED_EDGE('',*,*,#244148,.T.); +#244472 = ORIENTED_EDGE('',*,*,#244179,.T.); +#244473 = ORIENTED_EDGE('',*,*,#244210,.T.); +#244474 = ORIENTED_EDGE('',*,*,#244241,.T.); +#244475 = ORIENTED_EDGE('',*,*,#244272,.T.); +#244476 = ORIENTED_EDGE('',*,*,#244303,.T.); +#244477 = ORIENTED_EDGE('',*,*,#244334,.T.); +#244478 = ORIENTED_EDGE('',*,*,#244365,.T.); +#244479 = ORIENTED_EDGE('',*,*,#244398,.T.); +#244480 = FACE_BOUND('',#244481,.T.); +#244481 = EDGE_LOOP('',(#244482)); +#244482 = ORIENTED_EDGE('',*,*,#244429,.T.); +#244483 = PLANE('',#244484); +#244484 = AXIS2_PLACEMENT_3D('',#244485,#244486,#244487); +#244485 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#244486 = DIRECTION('',(-0.,-0.,-1.)); +#244487 = DIRECTION('',(-1.,0.,0.)); +#244488 = MANIFOLD_SOLID_BREP('',#244489); +#244489 = CLOSED_SHELL('',(#244490,#244532,#244563,#244594,#244625, + #244656,#244687,#244718,#244749,#244780,#244811,#244842,#244873, + #244904,#244937,#244968,#244999,#245030,#245061,#245092,#245123, + #245154,#245185,#245216,#245238,#245271,#245306)); +#244490 = ADVANCED_FACE('',(#244491),#244527,.T.); +#244491 = FACE_BOUND('',#244492,.T.); +#244492 = EDGE_LOOP('',(#244493,#244503,#244512,#244520)); +#244493 = ORIENTED_EDGE('',*,*,#244494,.T.); +#244494 = EDGE_CURVE('',#244495,#244497,#244499,.T.); +#244495 = VERTEX_POINT('',#244496); +#244496 = CARTESIAN_POINT('',(129.230491,-71.098079,1.51)); +#244497 = VERTEX_POINT('',#244498); +#244498 = CARTESIAN_POINT('',(129.230491,-71.098079,1.545)); +#244499 = LINE('',#244500,#244501); +#244500 = CARTESIAN_POINT('',(129.230491,-71.098079,1.51)); +#244501 = VECTOR('',#244502,1.); +#244502 = DIRECTION('',(0.,0.,1.)); +#244503 = ORIENTED_EDGE('',*,*,#244504,.T.); +#244504 = EDGE_CURVE('',#244497,#244505,#244507,.T.); +#244505 = VERTEX_POINT('',#244506); +#244506 = CARTESIAN_POINT('',(129.230491,-70.901921,1.545)); +#244507 = CIRCLE('',#244508,0.100000456609); +#244508 = AXIS2_PLACEMENT_3D('',#244509,#244510,#244511); +#244509 = CARTESIAN_POINT('',(129.25,-71.,1.545)); +#244510 = DIRECTION('',(0.,0.,-1.)); +#244511 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#244512 = ORIENTED_EDGE('',*,*,#244513,.F.); +#244513 = EDGE_CURVE('',#244514,#244505,#244516,.T.); +#244514 = VERTEX_POINT('',#244515); +#244515 = CARTESIAN_POINT('',(129.230491,-70.901921,1.51)); +#244516 = LINE('',#244517,#244518); +#244517 = CARTESIAN_POINT('',(129.230491,-70.901921,1.51)); +#244518 = VECTOR('',#244519,1.); +#244519 = DIRECTION('',(0.,0.,1.)); +#244520 = ORIENTED_EDGE('',*,*,#244521,.F.); +#244521 = EDGE_CURVE('',#244495,#244514,#244522,.T.); +#244522 = CIRCLE('',#244523,0.100000456609); +#244523 = AXIS2_PLACEMENT_3D('',#244524,#244525,#244526); +#244524 = CARTESIAN_POINT('',(129.25,-71.,1.51)); +#244525 = DIRECTION('',(0.,0.,-1.)); +#244526 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#244527 = CYLINDRICAL_SURFACE('',#244528,0.100000456609); +#244528 = AXIS2_PLACEMENT_3D('',#244529,#244530,#244531); +#244529 = CARTESIAN_POINT('',(129.25,-71.,1.51)); +#244530 = DIRECTION('',(0.,0.,-1.)); +#244531 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#244532 = ADVANCED_FACE('',(#244533),#244558,.T.); +#244533 = FACE_BOUND('',#244534,.T.); +#244534 = EDGE_LOOP('',(#244535,#244536,#244544,#244552)); +#244535 = ORIENTED_EDGE('',*,*,#244513,.T.); +#244536 = ORIENTED_EDGE('',*,*,#244537,.T.); +#244537 = EDGE_CURVE('',#244505,#244538,#244540,.T.); +#244538 = VERTEX_POINT('',#244539); +#244539 = CARTESIAN_POINT('',(130.219509,-70.901921,1.545)); +#244540 = LINE('',#244541,#244542); +#244541 = CARTESIAN_POINT('',(129.230491,-70.901921,1.545)); +#244542 = VECTOR('',#244543,1.); +#244543 = DIRECTION('',(1.,0.,0.)); +#244544 = ORIENTED_EDGE('',*,*,#244545,.F.); +#244545 = EDGE_CURVE('',#244546,#244538,#244548,.T.); +#244546 = VERTEX_POINT('',#244547); +#244547 = CARTESIAN_POINT('',(130.219509,-70.901921,1.51)); +#244548 = LINE('',#244549,#244550); +#244549 = CARTESIAN_POINT('',(130.219509,-70.901921,1.51)); +#244550 = VECTOR('',#244551,1.); +#244551 = DIRECTION('',(0.,0.,1.)); +#244552 = ORIENTED_EDGE('',*,*,#244553,.F.); +#244553 = EDGE_CURVE('',#244514,#244546,#244554,.T.); +#244554 = LINE('',#244555,#244556); +#244555 = CARTESIAN_POINT('',(129.230491,-70.901921,1.51)); +#244556 = VECTOR('',#244557,1.); +#244557 = DIRECTION('',(1.,0.,0.)); +#244558 = PLANE('',#244559); +#244559 = AXIS2_PLACEMENT_3D('',#244560,#244561,#244562); +#244560 = CARTESIAN_POINT('',(129.230491,-70.901921,1.51)); +#244561 = DIRECTION('',(0.,1.,0.)); +#244562 = DIRECTION('',(1.,0.,0.)); +#244563 = ADVANCED_FACE('',(#244564),#244589,.T.); +#244564 = FACE_BOUND('',#244565,.T.); +#244565 = EDGE_LOOP('',(#244566,#244567,#244575,#244583)); +#244566 = ORIENTED_EDGE('',*,*,#244545,.T.); +#244567 = ORIENTED_EDGE('',*,*,#244568,.T.); +#244568 = EDGE_CURVE('',#244538,#244569,#244571,.T.); +#244569 = VERTEX_POINT('',#244570); +#244570 = CARTESIAN_POINT('',(130.255557,-70.916853,1.545)); +#244571 = LINE('',#244572,#244573); +#244572 = CARTESIAN_POINT('',(130.219509,-70.901921,1.545)); +#244573 = VECTOR('',#244574,1.); +#244574 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#244575 = ORIENTED_EDGE('',*,*,#244576,.F.); +#244576 = EDGE_CURVE('',#244577,#244569,#244579,.T.); +#244577 = VERTEX_POINT('',#244578); +#244578 = CARTESIAN_POINT('',(130.255557,-70.916853,1.51)); +#244579 = LINE('',#244580,#244581); +#244580 = CARTESIAN_POINT('',(130.255557,-70.916853,1.51)); +#244581 = VECTOR('',#244582,1.); +#244582 = DIRECTION('',(0.,0.,1.)); +#244583 = ORIENTED_EDGE('',*,*,#244584,.F.); +#244584 = EDGE_CURVE('',#244546,#244577,#244585,.T.); +#244585 = LINE('',#244586,#244587); +#244586 = CARTESIAN_POINT('',(130.219509,-70.901921,1.51)); +#244587 = VECTOR('',#244588,1.); +#244588 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#244589 = PLANE('',#244590); +#244590 = AXIS2_PLACEMENT_3D('',#244591,#244592,#244593); +#244591 = CARTESIAN_POINT('',(130.219509,-70.901921,1.51)); +#244592 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#244593 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#244594 = ADVANCED_FACE('',(#244595),#244620,.T.); +#244595 = FACE_BOUND('',#244596,.T.); +#244596 = EDGE_LOOP('',(#244597,#244598,#244606,#244614)); +#244597 = ORIENTED_EDGE('',*,*,#244576,.T.); +#244598 = ORIENTED_EDGE('',*,*,#244599,.T.); +#244599 = EDGE_CURVE('',#244569,#244600,#244602,.T.); +#244600 = VERTEX_POINT('',#244601); +#244601 = CARTESIAN_POINT('',(134.033147,-74.694443,1.545)); +#244602 = LINE('',#244603,#244604); +#244603 = CARTESIAN_POINT('',(130.255557,-70.916853,1.545)); +#244604 = VECTOR('',#244605,1.); +#244605 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#244606 = ORIENTED_EDGE('',*,*,#244607,.F.); +#244607 = EDGE_CURVE('',#244608,#244600,#244610,.T.); +#244608 = VERTEX_POINT('',#244609); +#244609 = CARTESIAN_POINT('',(134.033147,-74.694443,1.51)); +#244610 = LINE('',#244611,#244612); +#244611 = CARTESIAN_POINT('',(134.033147,-74.694443,1.51)); +#244612 = VECTOR('',#244613,1.); +#244613 = DIRECTION('',(0.,0.,1.)); +#244614 = ORIENTED_EDGE('',*,*,#244615,.F.); +#244615 = EDGE_CURVE('',#244577,#244608,#244616,.T.); +#244616 = LINE('',#244617,#244618); +#244617 = CARTESIAN_POINT('',(130.255557,-70.916853,1.51)); +#244618 = VECTOR('',#244619,1.); +#244619 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#244620 = PLANE('',#244621); +#244621 = AXIS2_PLACEMENT_3D('',#244622,#244623,#244624); +#244622 = CARTESIAN_POINT('',(130.255557,-70.916853,1.51)); +#244623 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#244624 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#244625 = ADVANCED_FACE('',(#244626),#244651,.T.); +#244626 = FACE_BOUND('',#244627,.T.); +#244627 = EDGE_LOOP('',(#244628,#244629,#244637,#244645)); +#244628 = ORIENTED_EDGE('',*,*,#244607,.T.); +#244629 = ORIENTED_EDGE('',*,*,#244630,.T.); +#244630 = EDGE_CURVE('',#244600,#244631,#244633,.T.); +#244631 = VERTEX_POINT('',#244632); +#244632 = CARTESIAN_POINT('',(134.048079,-74.730491,1.545)); +#244633 = LINE('',#244634,#244635); +#244634 = CARTESIAN_POINT('',(134.033147,-74.694443,1.545)); +#244635 = VECTOR('',#244636,1.); +#244636 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244637 = ORIENTED_EDGE('',*,*,#244638,.F.); +#244638 = EDGE_CURVE('',#244639,#244631,#244641,.T.); +#244639 = VERTEX_POINT('',#244640); +#244640 = CARTESIAN_POINT('',(134.048079,-74.730491,1.51)); +#244641 = LINE('',#244642,#244643); +#244642 = CARTESIAN_POINT('',(134.048079,-74.730491,1.51)); +#244643 = VECTOR('',#244644,1.); +#244644 = DIRECTION('',(0.,0.,1.)); +#244645 = ORIENTED_EDGE('',*,*,#244646,.F.); +#244646 = EDGE_CURVE('',#244608,#244639,#244647,.T.); +#244647 = LINE('',#244648,#244649); +#244648 = CARTESIAN_POINT('',(134.033147,-74.694443,1.51)); +#244649 = VECTOR('',#244650,1.); +#244650 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244651 = PLANE('',#244652); +#244652 = AXIS2_PLACEMENT_3D('',#244653,#244654,#244655); +#244653 = CARTESIAN_POINT('',(134.033147,-74.694443,1.51)); +#244654 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#244655 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244656 = ADVANCED_FACE('',(#244657),#244682,.T.); +#244657 = FACE_BOUND('',#244658,.T.); +#244658 = EDGE_LOOP('',(#244659,#244660,#244668,#244676)); +#244659 = ORIENTED_EDGE('',*,*,#244638,.T.); +#244660 = ORIENTED_EDGE('',*,*,#244661,.T.); +#244661 = EDGE_CURVE('',#244631,#244662,#244664,.T.); +#244662 = VERTEX_POINT('',#244663); +#244663 = CARTESIAN_POINT('',(134.05,-77.974264,1.545)); +#244664 = LINE('',#244665,#244666); +#244665 = CARTESIAN_POINT('',(134.048079,-74.730491,1.545)); +#244666 = VECTOR('',#244667,1.); +#244667 = DIRECTION('',(5.92211496658E-04,-0.999999824643,0.)); +#244668 = ORIENTED_EDGE('',*,*,#244669,.F.); +#244669 = EDGE_CURVE('',#244670,#244662,#244672,.T.); +#244670 = VERTEX_POINT('',#244671); +#244671 = CARTESIAN_POINT('',(134.05,-77.974264,1.51)); +#244672 = LINE('',#244673,#244674); +#244673 = CARTESIAN_POINT('',(134.05,-77.974264,1.51)); +#244674 = VECTOR('',#244675,1.); +#244675 = DIRECTION('',(0.,0.,1.)); +#244676 = ORIENTED_EDGE('',*,*,#244677,.F.); +#244677 = EDGE_CURVE('',#244639,#244670,#244678,.T.); +#244678 = LINE('',#244679,#244680); +#244679 = CARTESIAN_POINT('',(134.048079,-74.730491,1.51)); +#244680 = VECTOR('',#244681,1.); +#244681 = DIRECTION('',(5.92211496658E-04,-0.999999824643,0.)); +#244682 = PLANE('',#244683); +#244683 = AXIS2_PLACEMENT_3D('',#244684,#244685,#244686); +#244684 = CARTESIAN_POINT('',(134.048079,-74.730491,1.51)); +#244685 = DIRECTION('',(0.999999824643,5.92211496658E-04,-0.)); +#244686 = DIRECTION('',(5.92211496658E-04,-0.999999824643,0.)); +#244687 = ADVANCED_FACE('',(#244688),#244713,.T.); +#244688 = FACE_BOUND('',#244689,.T.); +#244689 = EDGE_LOOP('',(#244690,#244691,#244699,#244707)); +#244690 = ORIENTED_EDGE('',*,*,#244669,.T.); +#244691 = ORIENTED_EDGE('',*,*,#244692,.T.); +#244692 = EDGE_CURVE('',#244662,#244693,#244695,.T.); +#244693 = VERTEX_POINT('',#244694); +#244694 = CARTESIAN_POINT('',(134.083147,-78.010127,1.545)); +#244695 = LINE('',#244696,#244697); +#244696 = CARTESIAN_POINT('',(134.05,-77.974264,1.545)); +#244697 = VECTOR('',#244698,1.); +#244698 = DIRECTION('',(0.678751981136,-0.734367583778,0.)); +#244699 = ORIENTED_EDGE('',*,*,#244700,.F.); +#244700 = EDGE_CURVE('',#244701,#244693,#244703,.T.); +#244701 = VERTEX_POINT('',#244702); +#244702 = CARTESIAN_POINT('',(134.083147,-78.010127,1.51)); +#244703 = LINE('',#244704,#244705); +#244704 = CARTESIAN_POINT('',(134.083147,-78.010127,1.51)); +#244705 = VECTOR('',#244706,1.); +#244706 = DIRECTION('',(0.,0.,1.)); +#244707 = ORIENTED_EDGE('',*,*,#244708,.F.); +#244708 = EDGE_CURVE('',#244670,#244701,#244709,.T.); +#244709 = LINE('',#244710,#244711); +#244710 = CARTESIAN_POINT('',(134.05,-77.974264,1.51)); +#244711 = VECTOR('',#244712,1.); +#244712 = DIRECTION('',(0.678751981136,-0.734367583778,0.)); +#244713 = PLANE('',#244714); +#244714 = AXIS2_PLACEMENT_3D('',#244715,#244716,#244717); +#244715 = CARTESIAN_POINT('',(134.05,-77.974264,1.51)); +#244716 = DIRECTION('',(0.734367583778,0.678751981136,-0.)); +#244717 = DIRECTION('',(0.678751981136,-0.734367583778,0.)); +#244718 = ADVANCED_FACE('',(#244719),#244744,.T.); +#244719 = FACE_BOUND('',#244720,.T.); +#244720 = EDGE_LOOP('',(#244721,#244722,#244730,#244738)); +#244721 = ORIENTED_EDGE('',*,*,#244700,.T.); +#244722 = ORIENTED_EDGE('',*,*,#244723,.T.); +#244723 = EDGE_CURVE('',#244693,#244724,#244726,.T.); +#244724 = VERTEX_POINT('',#244725); +#244725 = CARTESIAN_POINT('',(134.098079,-78.046176,1.545)); +#244726 = LINE('',#244727,#244728); +#244727 = CARTESIAN_POINT('',(134.083147,-78.010127,1.545)); +#244728 = VECTOR('',#244729,1.); +#244729 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#244730 = ORIENTED_EDGE('',*,*,#244731,.F.); +#244731 = EDGE_CURVE('',#244732,#244724,#244734,.T.); +#244732 = VERTEX_POINT('',#244733); +#244733 = CARTESIAN_POINT('',(134.098079,-78.046176,1.51)); +#244734 = LINE('',#244735,#244736); +#244735 = CARTESIAN_POINT('',(134.098079,-78.046176,1.51)); +#244736 = VECTOR('',#244737,1.); +#244737 = DIRECTION('',(0.,0.,1.)); +#244738 = ORIENTED_EDGE('',*,*,#244739,.F.); +#244739 = EDGE_CURVE('',#244701,#244732,#244740,.T.); +#244740 = LINE('',#244741,#244742); +#244741 = CARTESIAN_POINT('',(134.083147,-78.010127,1.51)); +#244742 = VECTOR('',#244743,1.); +#244743 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#244744 = PLANE('',#244745); +#244745 = AXIS2_PLACEMENT_3D('',#244746,#244747,#244748); +#244746 = CARTESIAN_POINT('',(134.083147,-78.010127,1.51)); +#244747 = DIRECTION('',(0.923879393968,0.382683766838,-0.)); +#244748 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#244749 = ADVANCED_FACE('',(#244750),#244775,.T.); +#244750 = FACE_BOUND('',#244751,.T.); +#244751 = EDGE_LOOP('',(#244752,#244753,#244761,#244769)); +#244752 = ORIENTED_EDGE('',*,*,#244731,.T.); +#244753 = ORIENTED_EDGE('',*,*,#244754,.T.); +#244754 = EDGE_CURVE('',#244724,#244755,#244757,.T.); +#244755 = VERTEX_POINT('',#244756); +#244756 = CARTESIAN_POINT('',(134.1,-78.47051,1.545)); +#244757 = LINE('',#244758,#244759); +#244758 = CARTESIAN_POINT('',(134.098079,-78.046176,1.545)); +#244759 = VECTOR('',#244760,1.); +#244760 = DIRECTION('',(4.527047833165E-03,-0.999989752866,0.)); +#244761 = ORIENTED_EDGE('',*,*,#244762,.F.); +#244762 = EDGE_CURVE('',#244763,#244755,#244765,.T.); +#244763 = VERTEX_POINT('',#244764); +#244764 = CARTESIAN_POINT('',(134.1,-78.47051,1.51)); +#244765 = LINE('',#244766,#244767); +#244766 = CARTESIAN_POINT('',(134.1,-78.47051,1.51)); +#244767 = VECTOR('',#244768,1.); +#244768 = DIRECTION('',(0.,0.,1.)); +#244769 = ORIENTED_EDGE('',*,*,#244770,.F.); +#244770 = EDGE_CURVE('',#244732,#244763,#244771,.T.); +#244771 = LINE('',#244772,#244773); +#244772 = CARTESIAN_POINT('',(134.098079,-78.046176,1.51)); +#244773 = VECTOR('',#244774,1.); +#244774 = DIRECTION('',(4.527047833165E-03,-0.999989752866,0.)); +#244775 = PLANE('',#244776); +#244776 = AXIS2_PLACEMENT_3D('',#244777,#244778,#244779); +#244777 = CARTESIAN_POINT('',(134.098079,-78.046176,1.51)); +#244778 = DIRECTION('',(0.999989752866,4.527047833165E-03,-0.)); +#244779 = DIRECTION('',(4.527047833165E-03,-0.999989752866,0.)); +#244780 = ADVANCED_FACE('',(#244781),#244806,.T.); +#244781 = FACE_BOUND('',#244782,.T.); +#244782 = EDGE_LOOP('',(#244783,#244784,#244792,#244800)); +#244783 = ORIENTED_EDGE('',*,*,#244762,.T.); +#244784 = ORIENTED_EDGE('',*,*,#244785,.T.); +#244785 = EDGE_CURVE('',#244755,#244786,#244788,.T.); +#244786 = VERTEX_POINT('',#244787); +#244787 = CARTESIAN_POINT('',(134.883147,-79.256375,1.545)); +#244788 = LINE('',#244789,#244790); +#244789 = CARTESIAN_POINT('',(134.1,-78.47051,1.545)); +#244790 = VECTOR('',#244791,1.); +#244791 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#244792 = ORIENTED_EDGE('',*,*,#244793,.F.); +#244793 = EDGE_CURVE('',#244794,#244786,#244796,.T.); +#244794 = VERTEX_POINT('',#244795); +#244795 = CARTESIAN_POINT('',(134.883147,-79.256375,1.51)); +#244796 = LINE('',#244797,#244798); +#244797 = CARTESIAN_POINT('',(134.883147,-79.256375,1.51)); +#244798 = VECTOR('',#244799,1.); +#244799 = DIRECTION('',(0.,0.,1.)); +#244800 = ORIENTED_EDGE('',*,*,#244801,.F.); +#244801 = EDGE_CURVE('',#244763,#244794,#244802,.T.); +#244802 = LINE('',#244803,#244804); +#244803 = CARTESIAN_POINT('',(134.1,-78.47051,1.51)); +#244804 = VECTOR('',#244805,1.); +#244805 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#244806 = PLANE('',#244807); +#244807 = AXIS2_PLACEMENT_3D('',#244808,#244809,#244810); +#244808 = CARTESIAN_POINT('',(134.1,-78.47051,1.51)); +#244809 = DIRECTION('',(0.708330639693,0.705880800753,-0.)); +#244810 = DIRECTION('',(0.705880800753,-0.708330639693,0.)); +#244811 = ADVANCED_FACE('',(#244812),#244837,.T.); +#244812 = FACE_BOUND('',#244813,.T.); +#244813 = EDGE_LOOP('',(#244814,#244815,#244823,#244831)); +#244814 = ORIENTED_EDGE('',*,*,#244793,.T.); +#244815 = ORIENTED_EDGE('',*,*,#244816,.T.); +#244816 = EDGE_CURVE('',#244786,#244817,#244819,.T.); +#244817 = VERTEX_POINT('',#244818); +#244818 = CARTESIAN_POINT('',(134.898079,-79.292423,1.545)); +#244819 = LINE('',#244820,#244821); +#244820 = CARTESIAN_POINT('',(134.883147,-79.256375,1.545)); +#244821 = VECTOR('',#244822,1.); +#244822 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244823 = ORIENTED_EDGE('',*,*,#244824,.F.); +#244824 = EDGE_CURVE('',#244825,#244817,#244827,.T.); +#244825 = VERTEX_POINT('',#244826); +#244826 = CARTESIAN_POINT('',(134.898079,-79.292423,1.51)); +#244827 = LINE('',#244828,#244829); +#244828 = CARTESIAN_POINT('',(134.898079,-79.292423,1.51)); +#244829 = VECTOR('',#244830,1.); +#244830 = DIRECTION('',(0.,0.,1.)); +#244831 = ORIENTED_EDGE('',*,*,#244832,.F.); +#244832 = EDGE_CURVE('',#244794,#244825,#244833,.T.); +#244833 = LINE('',#244834,#244835); +#244834 = CARTESIAN_POINT('',(134.883147,-79.256375,1.51)); +#244835 = VECTOR('',#244836,1.); +#244836 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244837 = PLANE('',#244838); +#244838 = AXIS2_PLACEMENT_3D('',#244839,#244840,#244841); +#244839 = CARTESIAN_POINT('',(134.883147,-79.256375,1.51)); +#244840 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#244841 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#244842 = ADVANCED_FACE('',(#244843),#244868,.T.); +#244843 = FACE_BOUND('',#244844,.T.); +#244844 = EDGE_LOOP('',(#244845,#244846,#244854,#244862)); +#244845 = ORIENTED_EDGE('',*,*,#244824,.T.); +#244846 = ORIENTED_EDGE('',*,*,#244847,.T.); +#244847 = EDGE_CURVE('',#244817,#244848,#244850,.T.); +#244848 = VERTEX_POINT('',#244849); +#244849 = CARTESIAN_POINT('',(134.9,-80.471852,1.545)); +#244850 = LINE('',#244851,#244852); +#244851 = CARTESIAN_POINT('',(134.898079,-79.292423,1.545)); +#244852 = VECTOR('',#244853,1.); +#244853 = DIRECTION('',(1.628752092718E-03,-0.999998673582,0.)); +#244854 = ORIENTED_EDGE('',*,*,#244855,.F.); +#244855 = EDGE_CURVE('',#244856,#244848,#244858,.T.); +#244856 = VERTEX_POINT('',#244857); +#244857 = CARTESIAN_POINT('',(134.9,-80.471852,1.51)); +#244858 = LINE('',#244859,#244860); +#244859 = CARTESIAN_POINT('',(134.9,-80.471852,1.51)); +#244860 = VECTOR('',#244861,1.); +#244861 = DIRECTION('',(0.,0.,1.)); +#244862 = ORIENTED_EDGE('',*,*,#244863,.F.); +#244863 = EDGE_CURVE('',#244825,#244856,#244864,.T.); +#244864 = LINE('',#244865,#244866); +#244865 = CARTESIAN_POINT('',(134.898079,-79.292423,1.51)); +#244866 = VECTOR('',#244867,1.); +#244867 = DIRECTION('',(1.628752092718E-03,-0.999998673582,0.)); +#244868 = PLANE('',#244869); +#244869 = AXIS2_PLACEMENT_3D('',#244870,#244871,#244872); +#244870 = CARTESIAN_POINT('',(134.898079,-79.292423,1.51)); +#244871 = DIRECTION('',(0.999998673582,1.628752092718E-03,-0.)); +#244872 = DIRECTION('',(1.628752092718E-03,-0.999998673582,0.)); +#244873 = ADVANCED_FACE('',(#244874),#244899,.T.); +#244874 = FACE_BOUND('',#244875,.T.); +#244875 = EDGE_LOOP('',(#244876,#244877,#244885,#244893)); +#244876 = ORIENTED_EDGE('',*,*,#244855,.T.); +#244877 = ORIENTED_EDGE('',*,*,#244878,.T.); +#244878 = EDGE_CURVE('',#244848,#244879,#244881,.T.); +#244879 = VERTEX_POINT('',#244880); +#244880 = CARTESIAN_POINT('',(134.914805,-80.475819,1.545)); +#244881 = LINE('',#244882,#244883); +#244882 = CARTESIAN_POINT('',(134.9,-80.471852,1.545)); +#244883 = VECTOR('',#244884,1.); +#244884 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#244885 = ORIENTED_EDGE('',*,*,#244886,.F.); +#244886 = EDGE_CURVE('',#244887,#244879,#244889,.T.); +#244887 = VERTEX_POINT('',#244888); +#244888 = CARTESIAN_POINT('',(134.914805,-80.475819,1.51)); +#244889 = LINE('',#244890,#244891); +#244890 = CARTESIAN_POINT('',(134.914805,-80.475819,1.51)); +#244891 = VECTOR('',#244892,1.); +#244892 = DIRECTION('',(0.,0.,1.)); +#244893 = ORIENTED_EDGE('',*,*,#244894,.F.); +#244894 = EDGE_CURVE('',#244856,#244887,#244895,.T.); +#244895 = LINE('',#244896,#244897); +#244896 = CARTESIAN_POINT('',(134.9,-80.471852,1.51)); +#244897 = VECTOR('',#244898,1.); +#244898 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#244899 = PLANE('',#244900); +#244900 = AXIS2_PLACEMENT_3D('',#244901,#244902,#244903); +#244901 = CARTESIAN_POINT('',(134.9,-80.471852,1.51)); +#244902 = DIRECTION('',(0.258819788119,0.965925627198,-0.)); +#244903 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#244904 = ADVANCED_FACE('',(#244905),#244932,.T.); +#244905 = FACE_BOUND('',#244906,.T.); +#244906 = EDGE_LOOP('',(#244907,#244908,#244917,#244925)); +#244907 = ORIENTED_EDGE('',*,*,#244886,.T.); +#244908 = ORIENTED_EDGE('',*,*,#244909,.T.); +#244909 = EDGE_CURVE('',#244879,#244910,#244912,.T.); +#244910 = VERTEX_POINT('',#244911); +#244911 = CARTESIAN_POINT('',(134.685195,-80.475819,1.545)); +#244912 = CIRCLE('',#244913,0.299999850918); +#244913 = AXIS2_PLACEMENT_3D('',#244914,#244915,#244916); +#244914 = CARTESIAN_POINT('',(134.8,-80.75298271069,1.545)); +#244915 = DIRECTION('',(0.,0.,-1.)); +#244916 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#244917 = ORIENTED_EDGE('',*,*,#244918,.F.); +#244918 = EDGE_CURVE('',#244919,#244910,#244921,.T.); +#244919 = VERTEX_POINT('',#244920); +#244920 = CARTESIAN_POINT('',(134.685195,-80.475819,1.51)); +#244921 = LINE('',#244922,#244923); +#244922 = CARTESIAN_POINT('',(134.685195,-80.475819,1.51)); +#244923 = VECTOR('',#244924,1.); +#244924 = DIRECTION('',(0.,0.,1.)); +#244925 = ORIENTED_EDGE('',*,*,#244926,.F.); +#244926 = EDGE_CURVE('',#244887,#244919,#244927,.T.); +#244927 = CIRCLE('',#244928,0.299999850918); +#244928 = AXIS2_PLACEMENT_3D('',#244929,#244930,#244931); +#244929 = CARTESIAN_POINT('',(134.8,-80.75298271069,1.51)); +#244930 = DIRECTION('',(0.,0.,-1.)); +#244931 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#244932 = CYLINDRICAL_SURFACE('',#244933,0.299999850918); +#244933 = AXIS2_PLACEMENT_3D('',#244934,#244935,#244936); +#244934 = CARTESIAN_POINT('',(134.8,-80.75298271069,1.51)); +#244935 = DIRECTION('',(0.,0.,-1.)); +#244936 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#244937 = ADVANCED_FACE('',(#244938),#244963,.T.); +#244938 = FACE_BOUND('',#244939,.T.); +#244939 = EDGE_LOOP('',(#244940,#244941,#244949,#244957)); +#244940 = ORIENTED_EDGE('',*,*,#244918,.T.); +#244941 = ORIENTED_EDGE('',*,*,#244942,.T.); +#244942 = EDGE_CURVE('',#244910,#244943,#244945,.T.); +#244943 = VERTEX_POINT('',#244944); +#244944 = CARTESIAN_POINT('',(134.7,-80.471852,1.545)); +#244945 = LINE('',#244946,#244947); +#244946 = CARTESIAN_POINT('',(134.685195,-80.475819,1.545)); +#244947 = VECTOR('',#244948,1.); +#244948 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#244949 = ORIENTED_EDGE('',*,*,#244950,.F.); +#244950 = EDGE_CURVE('',#244951,#244943,#244953,.T.); +#244951 = VERTEX_POINT('',#244952); +#244952 = CARTESIAN_POINT('',(134.7,-80.471852,1.51)); +#244953 = LINE('',#244954,#244955); +#244954 = CARTESIAN_POINT('',(134.7,-80.471852,1.51)); +#244955 = VECTOR('',#244956,1.); +#244956 = DIRECTION('',(0.,0.,1.)); +#244957 = ORIENTED_EDGE('',*,*,#244958,.F.); +#244958 = EDGE_CURVE('',#244919,#244951,#244959,.T.); +#244959 = LINE('',#244960,#244961); +#244960 = CARTESIAN_POINT('',(134.685195,-80.475819,1.51)); +#244961 = VECTOR('',#244962,1.); +#244962 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#244963 = PLANE('',#244964); +#244964 = AXIS2_PLACEMENT_3D('',#244965,#244966,#244967); +#244965 = CARTESIAN_POINT('',(134.685195,-80.475819,1.51)); +#244966 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#244967 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#244968 = ADVANCED_FACE('',(#244969),#244994,.T.); +#244969 = FACE_BOUND('',#244970,.T.); +#244970 = EDGE_LOOP('',(#244971,#244972,#244980,#244988)); +#244971 = ORIENTED_EDGE('',*,*,#244950,.T.); +#244972 = ORIENTED_EDGE('',*,*,#244973,.T.); +#244973 = EDGE_CURVE('',#244943,#244974,#244976,.T.); +#244974 = VERTEX_POINT('',#244975); +#244975 = CARTESIAN_POINT('',(134.7,-79.353354,1.545)); +#244976 = LINE('',#244977,#244978); +#244977 = CARTESIAN_POINT('',(134.7,-80.471852,1.545)); +#244978 = VECTOR('',#244979,1.); +#244979 = DIRECTION('',(0.,1.,0.)); +#244980 = ORIENTED_EDGE('',*,*,#244981,.F.); +#244981 = EDGE_CURVE('',#244982,#244974,#244984,.T.); +#244982 = VERTEX_POINT('',#244983); +#244983 = CARTESIAN_POINT('',(134.7,-79.353354,1.51)); +#244984 = LINE('',#244985,#244986); +#244985 = CARTESIAN_POINT('',(134.7,-79.353354,1.51)); +#244986 = VECTOR('',#244987,1.); +#244987 = DIRECTION('',(0.,0.,1.)); +#244988 = ORIENTED_EDGE('',*,*,#244989,.F.); +#244989 = EDGE_CURVE('',#244951,#244982,#244990,.T.); +#244990 = LINE('',#244991,#244992); +#244991 = CARTESIAN_POINT('',(134.7,-80.471852,1.51)); +#244992 = VECTOR('',#244993,1.); +#244993 = DIRECTION('',(0.,1.,0.)); +#244994 = PLANE('',#244995); +#244995 = AXIS2_PLACEMENT_3D('',#244996,#244997,#244998); +#244996 = CARTESIAN_POINT('',(134.7,-80.471852,1.51)); +#244997 = DIRECTION('',(-1.,0.,0.)); +#244998 = DIRECTION('',(0.,1.,0.)); +#244999 = ADVANCED_FACE('',(#245000),#245025,.T.); +#245000 = FACE_BOUND('',#245001,.T.); +#245001 = EDGE_LOOP('',(#245002,#245003,#245011,#245019)); +#245002 = ORIENTED_EDGE('',*,*,#244981,.T.); +#245003 = ORIENTED_EDGE('',*,*,#245004,.T.); +#245004 = EDGE_CURVE('',#244974,#245005,#245007,.T.); +#245005 = VERTEX_POINT('',#245006); +#245006 = CARTESIAN_POINT('',(133.916853,-78.567489,1.545)); +#245007 = LINE('',#245008,#245009); +#245008 = CARTESIAN_POINT('',(134.7,-79.353354,1.545)); +#245009 = VECTOR('',#245010,1.); +#245010 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#245011 = ORIENTED_EDGE('',*,*,#245012,.F.); +#245012 = EDGE_CURVE('',#245013,#245005,#245015,.T.); +#245013 = VERTEX_POINT('',#245014); +#245014 = CARTESIAN_POINT('',(133.916853,-78.567489,1.51)); +#245015 = LINE('',#245016,#245017); +#245016 = CARTESIAN_POINT('',(133.916853,-78.567489,1.51)); +#245017 = VECTOR('',#245018,1.); +#245018 = DIRECTION('',(0.,0.,1.)); +#245019 = ORIENTED_EDGE('',*,*,#245020,.F.); +#245020 = EDGE_CURVE('',#244982,#245013,#245021,.T.); +#245021 = LINE('',#245022,#245023); +#245022 = CARTESIAN_POINT('',(134.7,-79.353354,1.51)); +#245023 = VECTOR('',#245024,1.); +#245024 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#245025 = PLANE('',#245026); +#245026 = AXIS2_PLACEMENT_3D('',#245027,#245028,#245029); +#245027 = CARTESIAN_POINT('',(134.7,-79.353354,1.51)); +#245028 = DIRECTION('',(-0.708330639693,-0.705880800753,0.)); +#245029 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#245030 = ADVANCED_FACE('',(#245031),#245056,.T.); +#245031 = FACE_BOUND('',#245032,.T.); +#245032 = EDGE_LOOP('',(#245033,#245034,#245042,#245050)); +#245033 = ORIENTED_EDGE('',*,*,#245012,.T.); +#245034 = ORIENTED_EDGE('',*,*,#245035,.T.); +#245035 = EDGE_CURVE('',#245005,#245036,#245038,.T.); +#245036 = VERTEX_POINT('',#245037); +#245037 = CARTESIAN_POINT('',(133.901921,-78.531441,1.545)); +#245038 = LINE('',#245039,#245040); +#245039 = CARTESIAN_POINT('',(133.916853,-78.567489,1.545)); +#245040 = VECTOR('',#245041,1.); +#245041 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#245042 = ORIENTED_EDGE('',*,*,#245043,.F.); +#245043 = EDGE_CURVE('',#245044,#245036,#245046,.T.); +#245044 = VERTEX_POINT('',#245045); +#245045 = CARTESIAN_POINT('',(133.901921,-78.531441,1.51)); +#245046 = LINE('',#245047,#245048); +#245047 = CARTESIAN_POINT('',(133.901921,-78.531441,1.51)); +#245048 = VECTOR('',#245049,1.); +#245049 = DIRECTION('',(0.,0.,1.)); +#245050 = ORIENTED_EDGE('',*,*,#245051,.F.); +#245051 = EDGE_CURVE('',#245013,#245044,#245052,.T.); +#245052 = LINE('',#245053,#245054); +#245053 = CARTESIAN_POINT('',(133.916853,-78.567489,1.51)); +#245054 = VECTOR('',#245055,1.); +#245055 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#245056 = PLANE('',#245057); +#245057 = AXIS2_PLACEMENT_3D('',#245058,#245059,#245060); +#245058 = CARTESIAN_POINT('',(133.916853,-78.567489,1.51)); +#245059 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#245060 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#245061 = ADVANCED_FACE('',(#245062),#245087,.T.); +#245062 = FACE_BOUND('',#245063,.T.); +#245063 = EDGE_LOOP('',(#245064,#245065,#245073,#245081)); +#245064 = ORIENTED_EDGE('',*,*,#245043,.T.); +#245065 = ORIENTED_EDGE('',*,*,#245066,.T.); +#245066 = EDGE_CURVE('',#245036,#245067,#245069,.T.); +#245067 = VERTEX_POINT('',#245068); +#245068 = CARTESIAN_POINT('',(133.9,-78.107106,1.545)); +#245069 = LINE('',#245070,#245071); +#245070 = CARTESIAN_POINT('',(133.901921,-78.531441,1.545)); +#245071 = VECTOR('',#245072,1.); +#245072 = DIRECTION('',(-4.527037164813E-03,0.999989752915,0.)); +#245073 = ORIENTED_EDGE('',*,*,#245074,.F.); +#245074 = EDGE_CURVE('',#245075,#245067,#245077,.T.); +#245075 = VERTEX_POINT('',#245076); +#245076 = CARTESIAN_POINT('',(133.9,-78.107106,1.51)); +#245077 = LINE('',#245078,#245079); +#245078 = CARTESIAN_POINT('',(133.9,-78.107106,1.51)); +#245079 = VECTOR('',#245080,1.); +#245080 = DIRECTION('',(0.,0.,1.)); +#245081 = ORIENTED_EDGE('',*,*,#245082,.F.); +#245082 = EDGE_CURVE('',#245044,#245075,#245083,.T.); +#245083 = LINE('',#245084,#245085); +#245084 = CARTESIAN_POINT('',(133.901921,-78.531441,1.51)); +#245085 = VECTOR('',#245086,1.); +#245086 = DIRECTION('',(-4.527037164813E-03,0.999989752915,0.)); +#245087 = PLANE('',#245088); +#245088 = AXIS2_PLACEMENT_3D('',#245089,#245090,#245091); +#245089 = CARTESIAN_POINT('',(133.901921,-78.531441,1.51)); +#245090 = DIRECTION('',(-0.999989752915,-4.527037164813E-03,0.)); +#245091 = DIRECTION('',(-4.527037164813E-03,0.999989752915,0.)); +#245092 = ADVANCED_FACE('',(#245093),#245118,.T.); +#245093 = FACE_BOUND('',#245094,.T.); +#245094 = EDGE_LOOP('',(#245095,#245096,#245104,#245112)); +#245095 = ORIENTED_EDGE('',*,*,#245074,.T.); +#245096 = ORIENTED_EDGE('',*,*,#245097,.T.); +#245097 = EDGE_CURVE('',#245067,#245098,#245100,.T.); +#245098 = VERTEX_POINT('',#245099); +#245099 = CARTESIAN_POINT('',(133.866853,-78.071244,1.545)); +#245100 = LINE('',#245101,#245102); +#245101 = CARTESIAN_POINT('',(133.9,-78.107106,1.545)); +#245102 = VECTOR('',#245103,1.); +#245103 = DIRECTION('',(-0.678762188068,0.734358149712,0.)); +#245104 = ORIENTED_EDGE('',*,*,#245105,.F.); +#245105 = EDGE_CURVE('',#245106,#245098,#245108,.T.); +#245106 = VERTEX_POINT('',#245107); +#245107 = CARTESIAN_POINT('',(133.866853,-78.071244,1.51)); +#245108 = LINE('',#245109,#245110); +#245109 = CARTESIAN_POINT('',(133.866853,-78.071244,1.51)); +#245110 = VECTOR('',#245111,1.); +#245111 = DIRECTION('',(0.,0.,1.)); +#245112 = ORIENTED_EDGE('',*,*,#245113,.F.); +#245113 = EDGE_CURVE('',#245075,#245106,#245114,.T.); +#245114 = LINE('',#245115,#245116); +#245115 = CARTESIAN_POINT('',(133.9,-78.107106,1.51)); +#245116 = VECTOR('',#245117,1.); +#245117 = DIRECTION('',(-0.678762188068,0.734358149712,0.)); +#245118 = PLANE('',#245119); +#245119 = AXIS2_PLACEMENT_3D('',#245120,#245121,#245122); +#245120 = CARTESIAN_POINT('',(133.9,-78.107106,1.51)); +#245121 = DIRECTION('',(-0.734358149712,-0.678762188068,0.)); +#245122 = DIRECTION('',(-0.678762188068,0.734358149712,0.)); +#245123 = ADVANCED_FACE('',(#245124),#245149,.T.); +#245124 = FACE_BOUND('',#245125,.T.); +#245125 = EDGE_LOOP('',(#245126,#245127,#245135,#245143)); +#245126 = ORIENTED_EDGE('',*,*,#245105,.T.); +#245127 = ORIENTED_EDGE('',*,*,#245128,.T.); +#245128 = EDGE_CURVE('',#245098,#245129,#245131,.T.); +#245129 = VERTEX_POINT('',#245130); +#245130 = CARTESIAN_POINT('',(133.851921,-78.035195,1.545)); +#245131 = LINE('',#245132,#245133); +#245132 = CARTESIAN_POINT('',(133.866853,-78.071244,1.545)); +#245133 = VECTOR('',#245134,1.); +#245134 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#245135 = ORIENTED_EDGE('',*,*,#245136,.F.); +#245136 = EDGE_CURVE('',#245137,#245129,#245139,.T.); +#245137 = VERTEX_POINT('',#245138); +#245138 = CARTESIAN_POINT('',(133.851921,-78.035195,1.51)); +#245139 = LINE('',#245140,#245141); +#245140 = CARTESIAN_POINT('',(133.851921,-78.035195,1.51)); +#245141 = VECTOR('',#245142,1.); +#245142 = DIRECTION('',(0.,0.,1.)); +#245143 = ORIENTED_EDGE('',*,*,#245144,.F.); +#245144 = EDGE_CURVE('',#245106,#245137,#245145,.T.); +#245145 = LINE('',#245146,#245147); +#245146 = CARTESIAN_POINT('',(133.866853,-78.071244,1.51)); +#245147 = VECTOR('',#245148,1.); +#245148 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#245149 = PLANE('',#245150); +#245150 = AXIS2_PLACEMENT_3D('',#245151,#245152,#245153); +#245151 = CARTESIAN_POINT('',(133.866853,-78.071244,1.51)); +#245152 = DIRECTION('',(-0.923879393968,-0.382683766838,0.)); +#245153 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#245154 = ADVANCED_FACE('',(#245155),#245180,.T.); +#245155 = FACE_BOUND('',#245156,.T.); +#245156 = EDGE_LOOP('',(#245157,#245158,#245166,#245174)); +#245157 = ORIENTED_EDGE('',*,*,#245136,.T.); +#245158 = ORIENTED_EDGE('',*,*,#245159,.T.); +#245159 = EDGE_CURVE('',#245129,#245160,#245162,.T.); +#245160 = VERTEX_POINT('',#245161); +#245161 = CARTESIAN_POINT('',(133.85,-74.791422,1.545)); +#245162 = LINE('',#245163,#245164); +#245163 = CARTESIAN_POINT('',(133.851921,-78.035195,1.545)); +#245164 = VECTOR('',#245165,1.); +#245165 = DIRECTION('',(-5.92211496658E-04,0.999999824643,0.)); +#245166 = ORIENTED_EDGE('',*,*,#245167,.F.); +#245167 = EDGE_CURVE('',#245168,#245160,#245170,.T.); +#245168 = VERTEX_POINT('',#245169); +#245169 = CARTESIAN_POINT('',(133.85,-74.791422,1.51)); +#245170 = LINE('',#245171,#245172); +#245171 = CARTESIAN_POINT('',(133.85,-74.791422,1.51)); +#245172 = VECTOR('',#245173,1.); +#245173 = DIRECTION('',(0.,0.,1.)); +#245174 = ORIENTED_EDGE('',*,*,#245175,.F.); +#245175 = EDGE_CURVE('',#245137,#245168,#245176,.T.); +#245176 = LINE('',#245177,#245178); +#245177 = CARTESIAN_POINT('',(133.851921,-78.035195,1.51)); +#245178 = VECTOR('',#245179,1.); +#245179 = DIRECTION('',(-5.92211496658E-04,0.999999824643,0.)); +#245180 = PLANE('',#245181); +#245181 = AXIS2_PLACEMENT_3D('',#245182,#245183,#245184); +#245182 = CARTESIAN_POINT('',(133.851921,-78.035195,1.51)); +#245183 = DIRECTION('',(-0.999999824643,-5.92211496658E-04,0.)); +#245184 = DIRECTION('',(-5.92211496658E-04,0.999999824643,0.)); +#245185 = ADVANCED_FACE('',(#245186),#245211,.T.); +#245186 = FACE_BOUND('',#245187,.T.); +#245187 = EDGE_LOOP('',(#245188,#245189,#245197,#245205)); +#245188 = ORIENTED_EDGE('',*,*,#245167,.T.); +#245189 = ORIENTED_EDGE('',*,*,#245190,.T.); +#245190 = EDGE_CURVE('',#245160,#245191,#245193,.T.); +#245191 = VERTEX_POINT('',#245192); +#245192 = CARTESIAN_POINT('',(130.158578,-71.1,1.545)); +#245193 = LINE('',#245194,#245195); +#245194 = CARTESIAN_POINT('',(133.85,-74.791422,1.545)); +#245195 = VECTOR('',#245196,1.); +#245196 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#245197 = ORIENTED_EDGE('',*,*,#245198,.F.); +#245198 = EDGE_CURVE('',#245199,#245191,#245201,.T.); +#245199 = VERTEX_POINT('',#245200); +#245200 = CARTESIAN_POINT('',(130.158578,-71.1,1.51)); +#245201 = LINE('',#245202,#245203); +#245202 = CARTESIAN_POINT('',(130.158578,-71.1,1.51)); +#245203 = VECTOR('',#245204,1.); +#245204 = DIRECTION('',(0.,0.,1.)); +#245205 = ORIENTED_EDGE('',*,*,#245206,.F.); +#245206 = EDGE_CURVE('',#245168,#245199,#245207,.T.); +#245207 = LINE('',#245208,#245209); +#245208 = CARTESIAN_POINT('',(133.85,-74.791422,1.51)); +#245209 = VECTOR('',#245210,1.); +#245210 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#245211 = PLANE('',#245212); +#245212 = AXIS2_PLACEMENT_3D('',#245213,#245214,#245215); +#245213 = CARTESIAN_POINT('',(133.85,-74.791422,1.51)); +#245214 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#245215 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#245216 = ADVANCED_FACE('',(#245217),#245233,.T.); +#245217 = FACE_BOUND('',#245218,.T.); +#245218 = EDGE_LOOP('',(#245219,#245220,#245226,#245227)); +#245219 = ORIENTED_EDGE('',*,*,#245198,.T.); +#245220 = ORIENTED_EDGE('',*,*,#245221,.T.); +#245221 = EDGE_CURVE('',#245191,#244497,#245222,.T.); +#245222 = LINE('',#245223,#245224); +#245223 = CARTESIAN_POINT('',(130.158578,-71.1,1.545)); +#245224 = VECTOR('',#245225,1.); +#245225 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#245226 = ORIENTED_EDGE('',*,*,#244494,.F.); +#245227 = ORIENTED_EDGE('',*,*,#245228,.F.); +#245228 = EDGE_CURVE('',#245199,#244495,#245229,.T.); +#245229 = LINE('',#245230,#245231); +#245230 = CARTESIAN_POINT('',(130.158578,-71.1,1.51)); +#245231 = VECTOR('',#245232,1.); +#245232 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#245233 = PLANE('',#245234); +#245234 = AXIS2_PLACEMENT_3D('',#245235,#245236,#245237); +#245235 = CARTESIAN_POINT('',(130.158578,-71.1,1.51)); +#245236 = DIRECTION('',(-2.069844621208E-03,-0.999997857869,0.)); +#245237 = DIRECTION('',(-0.999997857869,2.069844621208E-03,0.)); +#245238 = ADVANCED_FACE('',(#245239),#245266,.F.); +#245239 = FACE_BOUND('',#245240,.T.); +#245240 = EDGE_LOOP('',(#245241,#245251,#245258,#245259)); +#245241 = ORIENTED_EDGE('',*,*,#245242,.T.); +#245242 = EDGE_CURVE('',#245243,#245245,#245247,.T.); +#245243 = VERTEX_POINT('',#245244); +#245244 = CARTESIAN_POINT('',(134.937255,-80.752983,1.51)); +#245245 = VERTEX_POINT('',#245246); +#245246 = CARTESIAN_POINT('',(134.937255,-80.752983,1.545)); +#245247 = LINE('',#245248,#245249); +#245248 = CARTESIAN_POINT('',(134.937255,-80.752983,1.51)); +#245249 = VECTOR('',#245250,1.); +#245250 = DIRECTION('',(0.,0.,1.)); +#245251 = ORIENTED_EDGE('',*,*,#245252,.T.); +#245252 = EDGE_CURVE('',#245245,#245245,#245253,.T.); +#245253 = CIRCLE('',#245254,0.137255); +#245254 = AXIS2_PLACEMENT_3D('',#245255,#245256,#245257); +#245255 = CARTESIAN_POINT('',(134.8,-80.752983,1.545)); +#245256 = DIRECTION('',(0.,0.,1.)); +#245257 = DIRECTION('',(1.,0.,-0.)); +#245258 = ORIENTED_EDGE('',*,*,#245242,.F.); +#245259 = ORIENTED_EDGE('',*,*,#245260,.F.); +#245260 = EDGE_CURVE('',#245243,#245243,#245261,.T.); +#245261 = CIRCLE('',#245262,0.137255); +#245262 = AXIS2_PLACEMENT_3D('',#245263,#245264,#245265); +#245263 = CARTESIAN_POINT('',(134.8,-80.752983,1.51)); +#245264 = DIRECTION('',(0.,0.,1.)); +#245265 = DIRECTION('',(1.,0.,-0.)); +#245266 = CYLINDRICAL_SURFACE('',#245267,0.137255); +#245267 = AXIS2_PLACEMENT_3D('',#245268,#245269,#245270); +#245268 = CARTESIAN_POINT('',(134.8,-80.752983,1.51)); +#245269 = DIRECTION('',(-0.,-0.,-1.)); +#245270 = DIRECTION('',(1.,0.,-0.)); +#245271 = ADVANCED_FACE('',(#245272,#245298),#245301,.F.); +#245272 = FACE_BOUND('',#245273,.T.); +#245273 = EDGE_LOOP('',(#245274,#245275,#245276,#245277,#245278,#245279, + #245280,#245281,#245282,#245283,#245284,#245285,#245286,#245287, + #245288,#245289,#245290,#245291,#245292,#245293,#245294,#245295, + #245296,#245297)); +#245274 = ORIENTED_EDGE('',*,*,#244521,.T.); +#245275 = ORIENTED_EDGE('',*,*,#244553,.T.); +#245276 = ORIENTED_EDGE('',*,*,#244584,.T.); +#245277 = ORIENTED_EDGE('',*,*,#244615,.T.); +#245278 = ORIENTED_EDGE('',*,*,#244646,.T.); +#245279 = ORIENTED_EDGE('',*,*,#244677,.T.); +#245280 = ORIENTED_EDGE('',*,*,#244708,.T.); +#245281 = ORIENTED_EDGE('',*,*,#244739,.T.); +#245282 = ORIENTED_EDGE('',*,*,#244770,.T.); +#245283 = ORIENTED_EDGE('',*,*,#244801,.T.); +#245284 = ORIENTED_EDGE('',*,*,#244832,.T.); +#245285 = ORIENTED_EDGE('',*,*,#244863,.T.); +#245286 = ORIENTED_EDGE('',*,*,#244894,.T.); +#245287 = ORIENTED_EDGE('',*,*,#244926,.T.); +#245288 = ORIENTED_EDGE('',*,*,#244958,.T.); +#245289 = ORIENTED_EDGE('',*,*,#244989,.T.); +#245290 = ORIENTED_EDGE('',*,*,#245020,.T.); +#245291 = ORIENTED_EDGE('',*,*,#245051,.T.); +#245292 = ORIENTED_EDGE('',*,*,#245082,.T.); +#245293 = ORIENTED_EDGE('',*,*,#245113,.T.); +#245294 = ORIENTED_EDGE('',*,*,#245144,.T.); +#245295 = ORIENTED_EDGE('',*,*,#245175,.T.); +#245296 = ORIENTED_EDGE('',*,*,#245206,.T.); +#245297 = ORIENTED_EDGE('',*,*,#245228,.T.); +#245298 = FACE_BOUND('',#245299,.T.); +#245299 = EDGE_LOOP('',(#245300)); +#245300 = ORIENTED_EDGE('',*,*,#245260,.T.); +#245301 = PLANE('',#245302); +#245302 = AXIS2_PLACEMENT_3D('',#245303,#245304,#245305); +#245303 = CARTESIAN_POINT('',(0.,0.,1.51)); +#245304 = DIRECTION('',(0.,0.,1.)); +#245305 = DIRECTION('',(1.,0.,-0.)); +#245306 = ADVANCED_FACE('',(#245307,#245333),#245336,.T.); +#245307 = FACE_BOUND('',#245308,.F.); +#245308 = EDGE_LOOP('',(#245309,#245310,#245311,#245312,#245313,#245314, + #245315,#245316,#245317,#245318,#245319,#245320,#245321,#245322, + #245323,#245324,#245325,#245326,#245327,#245328,#245329,#245330, + #245331,#245332)); +#245309 = ORIENTED_EDGE('',*,*,#244504,.T.); +#245310 = ORIENTED_EDGE('',*,*,#244537,.T.); +#245311 = ORIENTED_EDGE('',*,*,#244568,.T.); +#245312 = ORIENTED_EDGE('',*,*,#244599,.T.); +#245313 = ORIENTED_EDGE('',*,*,#244630,.T.); +#245314 = ORIENTED_EDGE('',*,*,#244661,.T.); +#245315 = ORIENTED_EDGE('',*,*,#244692,.T.); +#245316 = ORIENTED_EDGE('',*,*,#244723,.T.); +#245317 = ORIENTED_EDGE('',*,*,#244754,.T.); +#245318 = ORIENTED_EDGE('',*,*,#244785,.T.); +#245319 = ORIENTED_EDGE('',*,*,#244816,.T.); +#245320 = ORIENTED_EDGE('',*,*,#244847,.T.); +#245321 = ORIENTED_EDGE('',*,*,#244878,.T.); +#245322 = ORIENTED_EDGE('',*,*,#244909,.T.); +#245323 = ORIENTED_EDGE('',*,*,#244942,.T.); +#245324 = ORIENTED_EDGE('',*,*,#244973,.T.); +#245325 = ORIENTED_EDGE('',*,*,#245004,.T.); +#245326 = ORIENTED_EDGE('',*,*,#245035,.T.); +#245327 = ORIENTED_EDGE('',*,*,#245066,.T.); +#245328 = ORIENTED_EDGE('',*,*,#245097,.T.); +#245329 = ORIENTED_EDGE('',*,*,#245128,.T.); +#245330 = ORIENTED_EDGE('',*,*,#245159,.T.); +#245331 = ORIENTED_EDGE('',*,*,#245190,.T.); +#245332 = ORIENTED_EDGE('',*,*,#245221,.T.); +#245333 = FACE_BOUND('',#245334,.F.); +#245334 = EDGE_LOOP('',(#245335)); +#245335 = ORIENTED_EDGE('',*,*,#245252,.T.); +#245336 = PLANE('',#245337); +#245337 = AXIS2_PLACEMENT_3D('',#245338,#245339,#245340); +#245338 = CARTESIAN_POINT('',(0.,0.,1.545)); +#245339 = DIRECTION('',(0.,0.,1.)); +#245340 = DIRECTION('',(1.,0.,-0.)); +#245341 = MANIFOLD_SOLID_BREP('',#245342); +#245342 = CLOSED_SHELL('',(#245343,#245383,#245414,#245445,#245476, + #245507,#245538,#245569,#245600,#245631,#245662,#245693,#245724, + #245755,#245786,#245817,#245850,#245881,#245912,#245943,#245974, + #246005,#246036,#246067,#246098,#246129,#246160,#246191,#246222, + #246255,#246286,#246317,#246348,#246379,#246410,#246443,#246465, + #246498,#246545)); +#245343 = ADVANCED_FACE('',(#245344),#245378,.F.); +#245344 = FACE_BOUND('',#245345,.F.); +#245345 = EDGE_LOOP('',(#245346,#245356,#245364,#245372)); +#245346 = ORIENTED_EDGE('',*,*,#245347,.T.); +#245347 = EDGE_CURVE('',#245348,#245350,#245352,.T.); +#245348 = VERTEX_POINT('',#245349); +#245349 = CARTESIAN_POINT('',(134.9,-81.034113,0.)); +#245350 = VERTEX_POINT('',#245351); +#245351 = CARTESIAN_POINT('',(134.9,-81.034113,-3.5E-02)); +#245352 = LINE('',#245353,#245354); +#245353 = CARTESIAN_POINT('',(134.9,-81.034113,0.)); +#245354 = VECTOR('',#245355,1.); +#245355 = DIRECTION('',(0.,0.,-1.)); +#245356 = ORIENTED_EDGE('',*,*,#245357,.T.); +#245357 = EDGE_CURVE('',#245350,#245358,#245360,.T.); +#245358 = VERTEX_POINT('',#245359); +#245359 = CARTESIAN_POINT('',(134.898079,-82.213543,-3.5E-02)); +#245360 = LINE('',#245361,#245362); +#245361 = CARTESIAN_POINT('',(134.9,-81.034113,-3.5E-02)); +#245362 = VECTOR('',#245363,1.); +#245363 = DIRECTION('',(-1.628750711756E-03,-0.999998673585,0.)); +#245364 = ORIENTED_EDGE('',*,*,#245365,.F.); +#245365 = EDGE_CURVE('',#245366,#245358,#245368,.T.); +#245366 = VERTEX_POINT('',#245367); +#245367 = CARTESIAN_POINT('',(134.898079,-82.213543,0.)); +#245368 = LINE('',#245369,#245370); +#245369 = CARTESIAN_POINT('',(134.898079,-82.213543,0.)); +#245370 = VECTOR('',#245371,1.); +#245371 = DIRECTION('',(0.,0.,-1.)); +#245372 = ORIENTED_EDGE('',*,*,#245373,.F.); +#245373 = EDGE_CURVE('',#245348,#245366,#245374,.T.); +#245374 = LINE('',#245375,#245376); +#245375 = CARTESIAN_POINT('',(134.9,-81.034113,0.)); +#245376 = VECTOR('',#245377,1.); +#245377 = DIRECTION('',(-1.628750711756E-03,-0.999998673585,0.)); +#245378 = PLANE('',#245379); +#245379 = AXIS2_PLACEMENT_3D('',#245380,#245381,#245382); +#245380 = CARTESIAN_POINT('',(134.9,-81.034113,0.)); +#245381 = DIRECTION('',(-0.999998673585,1.628750711756E-03,0.)); +#245382 = DIRECTION('',(-1.628750711756E-03,-0.999998673585,0.)); +#245383 = ADVANCED_FACE('',(#245384),#245409,.F.); +#245384 = FACE_BOUND('',#245385,.F.); +#245385 = EDGE_LOOP('',(#245386,#245387,#245395,#245403)); +#245386 = ORIENTED_EDGE('',*,*,#245365,.T.); +#245387 = ORIENTED_EDGE('',*,*,#245388,.T.); +#245388 = EDGE_CURVE('',#245358,#245389,#245391,.T.); +#245389 = VERTEX_POINT('',#245390); +#245390 = CARTESIAN_POINT('',(134.883147,-82.249592,-3.5E-02)); +#245391 = LINE('',#245392,#245393); +#245392 = CARTESIAN_POINT('',(134.898079,-82.213543,-3.5E-02)); +#245393 = VECTOR('',#245394,1.); +#245394 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#245395 = ORIENTED_EDGE('',*,*,#245396,.F.); +#245396 = EDGE_CURVE('',#245397,#245389,#245399,.T.); +#245397 = VERTEX_POINT('',#245398); +#245398 = CARTESIAN_POINT('',(134.883147,-82.249592,0.)); +#245399 = LINE('',#245400,#245401); +#245400 = CARTESIAN_POINT('',(134.883147,-82.249592,0.)); +#245401 = VECTOR('',#245402,1.); +#245402 = DIRECTION('',(0.,0.,-1.)); +#245403 = ORIENTED_EDGE('',*,*,#245404,.F.); +#245404 = EDGE_CURVE('',#245366,#245397,#245405,.T.); +#245405 = LINE('',#245406,#245407); +#245406 = CARTESIAN_POINT('',(134.898079,-82.213543,0.)); +#245407 = VECTOR('',#245408,1.); +#245408 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#245409 = PLANE('',#245410); +#245410 = AXIS2_PLACEMENT_3D('',#245411,#245412,#245413); +#245411 = CARTESIAN_POINT('',(134.898079,-82.213543,0.)); +#245412 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#245413 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#245414 = ADVANCED_FACE('',(#245415),#245440,.F.); +#245415 = FACE_BOUND('',#245416,.F.); +#245416 = EDGE_LOOP('',(#245417,#245418,#245426,#245434)); +#245417 = ORIENTED_EDGE('',*,*,#245396,.T.); +#245418 = ORIENTED_EDGE('',*,*,#245419,.T.); +#245419 = EDGE_CURVE('',#245389,#245420,#245422,.T.); +#245420 = VERTEX_POINT('',#245421); +#245421 = CARTESIAN_POINT('',(133.25,-83.885455,-3.5E-02)); +#245422 = LINE('',#245423,#245424); +#245423 = CARTESIAN_POINT('',(134.883147,-82.249592,-3.5E-02)); +#245424 = VECTOR('',#245425,1.); +#245425 = DIRECTION('',(-0.706519049989,-0.707694024281,0.)); +#245426 = ORIENTED_EDGE('',*,*,#245427,.F.); +#245427 = EDGE_CURVE('',#245428,#245420,#245430,.T.); +#245428 = VERTEX_POINT('',#245429); +#245429 = CARTESIAN_POINT('',(133.25,-83.885455,0.)); +#245430 = LINE('',#245431,#245432); +#245431 = CARTESIAN_POINT('',(133.25,-83.885455,0.)); +#245432 = VECTOR('',#245433,1.); +#245433 = DIRECTION('',(0.,0.,-1.)); +#245434 = ORIENTED_EDGE('',*,*,#245435,.F.); +#245435 = EDGE_CURVE('',#245397,#245428,#245436,.T.); +#245436 = LINE('',#245437,#245438); +#245437 = CARTESIAN_POINT('',(134.883147,-82.249592,0.)); +#245438 = VECTOR('',#245439,1.); +#245439 = DIRECTION('',(-0.706519049989,-0.707694024281,0.)); +#245440 = PLANE('',#245441); +#245441 = AXIS2_PLACEMENT_3D('',#245442,#245443,#245444); +#245442 = CARTESIAN_POINT('',(134.883147,-82.249592,0.)); +#245443 = DIRECTION('',(-0.707694024281,0.706519049989,0.)); +#245444 = DIRECTION('',(-0.706519049989,-0.707694024281,0.)); +#245445 = ADVANCED_FACE('',(#245446),#245471,.F.); +#245446 = FACE_BOUND('',#245447,.F.); +#245447 = EDGE_LOOP('',(#245448,#245449,#245457,#245465)); +#245448 = ORIENTED_EDGE('',*,*,#245427,.T.); +#245449 = ORIENTED_EDGE('',*,*,#245450,.T.); +#245450 = EDGE_CURVE('',#245420,#245451,#245453,.T.); +#245451 = VERTEX_POINT('',#245452); +#245452 = CARTESIAN_POINT('',(133.25,-92.55,-3.5E-02)); +#245453 = LINE('',#245454,#245455); +#245454 = CARTESIAN_POINT('',(133.25,-83.885455,-3.5E-02)); +#245455 = VECTOR('',#245456,1.); +#245456 = DIRECTION('',(0.,-1.,0.)); +#245457 = ORIENTED_EDGE('',*,*,#245458,.F.); +#245458 = EDGE_CURVE('',#245459,#245451,#245461,.T.); +#245459 = VERTEX_POINT('',#245460); +#245460 = CARTESIAN_POINT('',(133.25,-92.55,0.)); +#245461 = LINE('',#245462,#245463); +#245462 = CARTESIAN_POINT('',(133.25,-92.55,0.)); +#245463 = VECTOR('',#245464,1.); +#245464 = DIRECTION('',(0.,0.,-1.)); +#245465 = ORIENTED_EDGE('',*,*,#245466,.F.); +#245466 = EDGE_CURVE('',#245428,#245459,#245467,.T.); +#245467 = LINE('',#245468,#245469); +#245468 = CARTESIAN_POINT('',(133.25,-83.885455,0.)); +#245469 = VECTOR('',#245470,1.); +#245470 = DIRECTION('',(0.,-1.,0.)); +#245471 = PLANE('',#245472); +#245472 = AXIS2_PLACEMENT_3D('',#245473,#245474,#245475); +#245473 = CARTESIAN_POINT('',(133.25,-83.885455,0.)); +#245474 = DIRECTION('',(-1.,-0.,-0.)); +#245475 = DIRECTION('',(0.,-1.,0.)); +#245476 = ADVANCED_FACE('',(#245477),#245502,.F.); +#245477 = FACE_BOUND('',#245478,.F.); +#245478 = EDGE_LOOP('',(#245479,#245480,#245488,#245496)); +#245479 = ORIENTED_EDGE('',*,*,#245458,.T.); +#245480 = ORIENTED_EDGE('',*,*,#245481,.T.); +#245481 = EDGE_CURVE('',#245451,#245482,#245484,.T.); +#245482 = VERTEX_POINT('',#245483); +#245483 = CARTESIAN_POINT('',(134.018038,-92.551921,-3.5E-02)); +#245484 = LINE('',#245485,#245486); +#245485 = CARTESIAN_POINT('',(133.25,-92.55,-3.5E-02)); +#245486 = VECTOR('',#245487,1.); +#245487 = DIRECTION('',(0.999996872068,-2.501170503593E-03,0.)); +#245488 = ORIENTED_EDGE('',*,*,#245489,.F.); +#245489 = EDGE_CURVE('',#245490,#245482,#245492,.T.); +#245490 = VERTEX_POINT('',#245491); +#245491 = CARTESIAN_POINT('',(134.018038,-92.551921,0.)); +#245492 = LINE('',#245493,#245494); +#245493 = CARTESIAN_POINT('',(134.018038,-92.551921,0.)); +#245494 = VECTOR('',#245495,1.); +#245495 = DIRECTION('',(0.,0.,-1.)); +#245496 = ORIENTED_EDGE('',*,*,#245497,.F.); +#245497 = EDGE_CURVE('',#245459,#245490,#245498,.T.); +#245498 = LINE('',#245499,#245500); +#245499 = CARTESIAN_POINT('',(133.25,-92.55,0.)); +#245500 = VECTOR('',#245501,1.); +#245501 = DIRECTION('',(0.999996872068,-2.501170503593E-03,0.)); +#245502 = PLANE('',#245503); +#245503 = AXIS2_PLACEMENT_3D('',#245504,#245505,#245506); +#245504 = CARTESIAN_POINT('',(133.25,-92.55,0.)); +#245505 = DIRECTION('',(-2.501170503593E-03,-0.999996872068,-0.)); +#245506 = DIRECTION('',(0.999996872068,-2.501170503593E-03,0.)); +#245507 = ADVANCED_FACE('',(#245508),#245533,.F.); +#245508 = FACE_BOUND('',#245509,.F.); +#245509 = EDGE_LOOP('',(#245510,#245511,#245519,#245527)); +#245510 = ORIENTED_EDGE('',*,*,#245489,.T.); +#245511 = ORIENTED_EDGE('',*,*,#245512,.T.); +#245512 = EDGE_CURVE('',#245482,#245513,#245515,.T.); +#245513 = VERTEX_POINT('',#245514); +#245514 = CARTESIAN_POINT('',(134.054086,-92.566853,-3.5E-02)); +#245515 = LINE('',#245516,#245517); +#245516 = CARTESIAN_POINT('',(134.018038,-92.551921,-3.5E-02)); +#245517 = VECTOR('',#245518,1.); +#245518 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#245519 = ORIENTED_EDGE('',*,*,#245520,.F.); +#245520 = EDGE_CURVE('',#245521,#245513,#245523,.T.); +#245521 = VERTEX_POINT('',#245522); +#245522 = CARTESIAN_POINT('',(134.054086,-92.566853,0.)); +#245523 = LINE('',#245524,#245525); +#245524 = CARTESIAN_POINT('',(134.054086,-92.566853,0.)); +#245525 = VECTOR('',#245526,1.); +#245526 = DIRECTION('',(0.,0.,-1.)); +#245527 = ORIENTED_EDGE('',*,*,#245528,.F.); +#245528 = EDGE_CURVE('',#245490,#245521,#245529,.T.); +#245529 = LINE('',#245530,#245531); +#245530 = CARTESIAN_POINT('',(134.018038,-92.551921,0.)); +#245531 = VECTOR('',#245532,1.); +#245532 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#245533 = PLANE('',#245534); +#245534 = AXIS2_PLACEMENT_3D('',#245535,#245536,#245537); +#245535 = CARTESIAN_POINT('',(134.018038,-92.551921,0.)); +#245536 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#245537 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#245538 = ADVANCED_FACE('',(#245539),#245564,.F.); +#245539 = FACE_BOUND('',#245540,.F.); +#245540 = EDGE_LOOP('',(#245541,#245542,#245550,#245558)); +#245541 = ORIENTED_EDGE('',*,*,#245520,.T.); +#245542 = ORIENTED_EDGE('',*,*,#245543,.T.); +#245543 = EDGE_CURVE('',#245513,#245544,#245546,.T.); +#245544 = VERTEX_POINT('',#245545); +#245545 = CARTESIAN_POINT('',(134.433147,-92.945914,-3.5E-02)); +#245546 = LINE('',#245547,#245548); +#245547 = CARTESIAN_POINT('',(134.054086,-92.566853,-3.5E-02)); +#245548 = VECTOR('',#245549,1.); +#245549 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245550 = ORIENTED_EDGE('',*,*,#245551,.F.); +#245551 = EDGE_CURVE('',#245552,#245544,#245554,.T.); +#245552 = VERTEX_POINT('',#245553); +#245553 = CARTESIAN_POINT('',(134.433147,-92.945914,0.)); +#245554 = LINE('',#245555,#245556); +#245555 = CARTESIAN_POINT('',(134.433147,-92.945914,0.)); +#245556 = VECTOR('',#245557,1.); +#245557 = DIRECTION('',(0.,0.,-1.)); +#245558 = ORIENTED_EDGE('',*,*,#245559,.F.); +#245559 = EDGE_CURVE('',#245521,#245552,#245560,.T.); +#245560 = LINE('',#245561,#245562); +#245561 = CARTESIAN_POINT('',(134.054086,-92.566853,0.)); +#245562 = VECTOR('',#245563,1.); +#245563 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245564 = PLANE('',#245565); +#245565 = AXIS2_PLACEMENT_3D('',#245566,#245567,#245568); +#245566 = CARTESIAN_POINT('',(134.054086,-92.566853,0.)); +#245567 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#245568 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245569 = ADVANCED_FACE('',(#245570),#245595,.F.); +#245570 = FACE_BOUND('',#245571,.F.); +#245571 = EDGE_LOOP('',(#245572,#245573,#245581,#245589)); +#245572 = ORIENTED_EDGE('',*,*,#245551,.T.); +#245573 = ORIENTED_EDGE('',*,*,#245574,.T.); +#245574 = EDGE_CURVE('',#245544,#245575,#245577,.T.); +#245575 = VERTEX_POINT('',#245576); +#245576 = CARTESIAN_POINT('',(134.448079,-92.981962,-3.5E-02)); +#245577 = LINE('',#245578,#245579); +#245578 = CARTESIAN_POINT('',(134.433147,-92.945914,-3.5E-02)); +#245579 = VECTOR('',#245580,1.); +#245580 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#245581 = ORIENTED_EDGE('',*,*,#245582,.F.); +#245582 = EDGE_CURVE('',#245583,#245575,#245585,.T.); +#245583 = VERTEX_POINT('',#245584); +#245584 = CARTESIAN_POINT('',(134.448079,-92.981962,0.)); +#245585 = LINE('',#245586,#245587); +#245586 = CARTESIAN_POINT('',(134.448079,-92.981962,0.)); +#245587 = VECTOR('',#245588,1.); +#245588 = DIRECTION('',(0.,0.,-1.)); +#245589 = ORIENTED_EDGE('',*,*,#245590,.F.); +#245590 = EDGE_CURVE('',#245552,#245583,#245591,.T.); +#245591 = LINE('',#245592,#245593); +#245592 = CARTESIAN_POINT('',(134.433147,-92.945914,0.)); +#245593 = VECTOR('',#245594,1.); +#245594 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#245595 = PLANE('',#245596); +#245596 = AXIS2_PLACEMENT_3D('',#245597,#245598,#245599); +#245597 = CARTESIAN_POINT('',(134.433147,-92.945914,0.)); +#245598 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#245599 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#245600 = ADVANCED_FACE('',(#245601),#245626,.F.); +#245601 = FACE_BOUND('',#245602,.F.); +#245602 = EDGE_LOOP('',(#245603,#245604,#245612,#245620)); +#245603 = ORIENTED_EDGE('',*,*,#245582,.T.); +#245604 = ORIENTED_EDGE('',*,*,#245605,.T.); +#245605 = EDGE_CURVE('',#245575,#245606,#245608,.T.); +#245606 = VERTEX_POINT('',#245607); +#245607 = CARTESIAN_POINT('',(134.45,-93.242893,-3.5E-02)); +#245608 = LINE('',#245609,#245610); +#245609 = CARTESIAN_POINT('',(134.448079,-92.981962,-3.5E-02)); +#245610 = VECTOR('',#245611,1.); +#245611 = DIRECTION('',(7.361900052152E-03,-0.999972900847,0.)); +#245612 = ORIENTED_EDGE('',*,*,#245613,.F.); +#245613 = EDGE_CURVE('',#245614,#245606,#245616,.T.); +#245614 = VERTEX_POINT('',#245615); +#245615 = CARTESIAN_POINT('',(134.45,-93.242893,0.)); +#245616 = LINE('',#245617,#245618); +#245617 = CARTESIAN_POINT('',(134.45,-93.242893,0.)); +#245618 = VECTOR('',#245619,1.); +#245619 = DIRECTION('',(0.,0.,-1.)); +#245620 = ORIENTED_EDGE('',*,*,#245621,.F.); +#245621 = EDGE_CURVE('',#245583,#245614,#245622,.T.); +#245622 = LINE('',#245623,#245624); +#245623 = CARTESIAN_POINT('',(134.448079,-92.981962,0.)); +#245624 = VECTOR('',#245625,1.); +#245625 = DIRECTION('',(7.361900052152E-03,-0.999972900847,0.)); +#245626 = PLANE('',#245627); +#245627 = AXIS2_PLACEMENT_3D('',#245628,#245629,#245630); +#245628 = CARTESIAN_POINT('',(134.448079,-92.981962,0.)); +#245629 = DIRECTION('',(-0.999972900847,-7.361900052152E-03,-0.)); +#245630 = DIRECTION('',(7.361900052152E-03,-0.999972900847,0.)); +#245631 = ADVANCED_FACE('',(#245632),#245657,.F.); +#245632 = FACE_BOUND('',#245633,.F.); +#245633 = EDGE_LOOP('',(#245634,#245635,#245643,#245651)); +#245634 = ORIENTED_EDGE('',*,*,#245613,.T.); +#245635 = ORIENTED_EDGE('',*,*,#245636,.T.); +#245636 = EDGE_CURVE('',#245606,#245637,#245639,.T.); +#245637 = VERTEX_POINT('',#245638); +#245638 = CARTESIAN_POINT('',(134.483148,-93.278758,-3.5E-02)); +#245639 = LINE('',#245640,#245641); +#245640 = CARTESIAN_POINT('',(134.45,-93.242893,-3.5E-02)); +#245641 = VECTOR('',#245642,1.); +#245642 = DIRECTION('',(0.678742610977,-0.734376244199,0.)); +#245643 = ORIENTED_EDGE('',*,*,#245644,.F.); +#245644 = EDGE_CURVE('',#245645,#245637,#245647,.T.); +#245645 = VERTEX_POINT('',#245646); +#245646 = CARTESIAN_POINT('',(134.483148,-93.278758,0.)); +#245647 = LINE('',#245648,#245649); +#245648 = CARTESIAN_POINT('',(134.483148,-93.278758,0.)); +#245649 = VECTOR('',#245650,1.); +#245650 = DIRECTION('',(0.,0.,-1.)); +#245651 = ORIENTED_EDGE('',*,*,#245652,.F.); +#245652 = EDGE_CURVE('',#245614,#245645,#245653,.T.); +#245653 = LINE('',#245654,#245655); +#245654 = CARTESIAN_POINT('',(134.45,-93.242893,0.)); +#245655 = VECTOR('',#245656,1.); +#245656 = DIRECTION('',(0.678742610977,-0.734376244199,0.)); +#245657 = PLANE('',#245658); +#245658 = AXIS2_PLACEMENT_3D('',#245659,#245660,#245661); +#245659 = CARTESIAN_POINT('',(134.45,-93.242893,0.)); +#245660 = DIRECTION('',(-0.734376244199,-0.678742610977,-0.)); +#245661 = DIRECTION('',(0.678742610977,-0.734376244199,0.)); +#245662 = ADVANCED_FACE('',(#245663),#245688,.F.); +#245663 = FACE_BOUND('',#245664,.F.); +#245664 = EDGE_LOOP('',(#245665,#245666,#245674,#245682)); +#245665 = ORIENTED_EDGE('',*,*,#245644,.T.); +#245666 = ORIENTED_EDGE('',*,*,#245667,.T.); +#245667 = EDGE_CURVE('',#245637,#245668,#245670,.T.); +#245668 = VERTEX_POINT('',#245669); +#245669 = CARTESIAN_POINT('',(134.498079,-93.314806,-3.5E-02)); +#245670 = LINE('',#245671,#245672); +#245671 = CARTESIAN_POINT('',(134.483148,-93.278758,-3.5E-02)); +#245672 = VECTOR('',#245673,1.); +#245673 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#245674 = ORIENTED_EDGE('',*,*,#245675,.F.); +#245675 = EDGE_CURVE('',#245676,#245668,#245678,.T.); +#245676 = VERTEX_POINT('',#245677); +#245677 = CARTESIAN_POINT('',(134.498079,-93.314806,0.)); +#245678 = LINE('',#245679,#245680); +#245679 = CARTESIAN_POINT('',(134.498079,-93.314806,0.)); +#245680 = VECTOR('',#245681,1.); +#245681 = DIRECTION('',(0.,0.,-1.)); +#245682 = ORIENTED_EDGE('',*,*,#245683,.F.); +#245683 = EDGE_CURVE('',#245645,#245676,#245684,.T.); +#245684 = LINE('',#245685,#245686); +#245685 = CARTESIAN_POINT('',(134.483148,-93.278758,0.)); +#245686 = VECTOR('',#245687,1.); +#245687 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#245688 = PLANE('',#245689); +#245689 = AXIS2_PLACEMENT_3D('',#245690,#245691,#245692); +#245690 = CARTESIAN_POINT('',(134.483148,-93.278758,0.)); +#245691 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#245692 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#245693 = ADVANCED_FACE('',(#245694),#245719,.F.); +#245694 = FACE_BOUND('',#245695,.F.); +#245695 = EDGE_LOOP('',(#245696,#245697,#245705,#245713)); +#245696 = ORIENTED_EDGE('',*,*,#245675,.T.); +#245697 = ORIENTED_EDGE('',*,*,#245698,.T.); +#245698 = EDGE_CURVE('',#245668,#245699,#245701,.T.); +#245699 = VERTEX_POINT('',#245700); +#245700 = CARTESIAN_POINT('',(134.5,-93.858578,-3.5E-02)); +#245701 = LINE('',#245702,#245703); +#245702 = CARTESIAN_POINT('',(134.498079,-93.314806,-3.5E-02)); +#245703 = VECTOR('',#245704,1.); +#245704 = DIRECTION('',(3.532708585407E-03,-0.999993759966,0.)); +#245705 = ORIENTED_EDGE('',*,*,#245706,.F.); +#245706 = EDGE_CURVE('',#245707,#245699,#245709,.T.); +#245707 = VERTEX_POINT('',#245708); +#245708 = CARTESIAN_POINT('',(134.5,-93.858578,0.)); +#245709 = LINE('',#245710,#245711); +#245710 = CARTESIAN_POINT('',(134.5,-93.858578,0.)); +#245711 = VECTOR('',#245712,1.); +#245712 = DIRECTION('',(0.,0.,-1.)); +#245713 = ORIENTED_EDGE('',*,*,#245714,.F.); +#245714 = EDGE_CURVE('',#245676,#245707,#245715,.T.); +#245715 = LINE('',#245716,#245717); +#245716 = CARTESIAN_POINT('',(134.498079,-93.314806,0.)); +#245717 = VECTOR('',#245718,1.); +#245718 = DIRECTION('',(3.532708585407E-03,-0.999993759966,0.)); +#245719 = PLANE('',#245720); +#245720 = AXIS2_PLACEMENT_3D('',#245721,#245722,#245723); +#245721 = CARTESIAN_POINT('',(134.498079,-93.314806,0.)); +#245722 = DIRECTION('',(-0.999993759966,-3.532708585407E-03,-0.)); +#245723 = DIRECTION('',(3.532708585407E-03,-0.999993759966,0.)); +#245724 = ADVANCED_FACE('',(#245725),#245750,.F.); +#245725 = FACE_BOUND('',#245726,.F.); +#245726 = EDGE_LOOP('',(#245727,#245728,#245736,#245744)); +#245727 = ORIENTED_EDGE('',*,*,#245706,.T.); +#245728 = ORIENTED_EDGE('',*,*,#245729,.T.); +#245729 = EDGE_CURVE('',#245699,#245730,#245732,.T.); +#245730 = VERTEX_POINT('',#245731); +#245731 = CARTESIAN_POINT('',(137.541422,-96.9,-3.5E-02)); +#245732 = LINE('',#245733,#245734); +#245733 = CARTESIAN_POINT('',(134.5,-93.858578,-3.5E-02)); +#245734 = VECTOR('',#245735,1.); +#245735 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245736 = ORIENTED_EDGE('',*,*,#245737,.F.); +#245737 = EDGE_CURVE('',#245738,#245730,#245740,.T.); +#245738 = VERTEX_POINT('',#245739); +#245739 = CARTESIAN_POINT('',(137.541422,-96.9,0.)); +#245740 = LINE('',#245741,#245742); +#245741 = CARTESIAN_POINT('',(137.541422,-96.9,0.)); +#245742 = VECTOR('',#245743,1.); +#245743 = DIRECTION('',(0.,0.,-1.)); +#245744 = ORIENTED_EDGE('',*,*,#245745,.F.); +#245745 = EDGE_CURVE('',#245707,#245738,#245746,.T.); +#245746 = LINE('',#245747,#245748); +#245747 = CARTESIAN_POINT('',(134.5,-93.858578,0.)); +#245748 = VECTOR('',#245749,1.); +#245749 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245750 = PLANE('',#245751); +#245751 = AXIS2_PLACEMENT_3D('',#245752,#245753,#245754); +#245752 = CARTESIAN_POINT('',(134.5,-93.858578,0.)); +#245753 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#245754 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#245755 = ADVANCED_FACE('',(#245756),#245781,.F.); +#245756 = FACE_BOUND('',#245757,.F.); +#245757 = EDGE_LOOP('',(#245758,#245759,#245767,#245775)); +#245758 = ORIENTED_EDGE('',*,*,#245737,.T.); +#245759 = ORIENTED_EDGE('',*,*,#245760,.T.); +#245760 = EDGE_CURVE('',#245730,#245761,#245763,.T.); +#245761 = VERTEX_POINT('',#245762); +#245762 = CARTESIAN_POINT('',(144.438578,-96.9,-3.5E-02)); +#245763 = LINE('',#245764,#245765); +#245764 = CARTESIAN_POINT('',(137.541422,-96.9,-3.5E-02)); +#245765 = VECTOR('',#245766,1.); +#245766 = DIRECTION('',(1.,0.,0.)); +#245767 = ORIENTED_EDGE('',*,*,#245768,.F.); +#245768 = EDGE_CURVE('',#245769,#245761,#245771,.T.); +#245769 = VERTEX_POINT('',#245770); +#245770 = CARTESIAN_POINT('',(144.438578,-96.9,0.)); +#245771 = LINE('',#245772,#245773); +#245772 = CARTESIAN_POINT('',(144.438578,-96.9,0.)); +#245773 = VECTOR('',#245774,1.); +#245774 = DIRECTION('',(0.,0.,-1.)); +#245775 = ORIENTED_EDGE('',*,*,#245776,.F.); +#245776 = EDGE_CURVE('',#245738,#245769,#245777,.T.); +#245777 = LINE('',#245778,#245779); +#245778 = CARTESIAN_POINT('',(137.541422,-96.9,0.)); +#245779 = VECTOR('',#245780,1.); +#245780 = DIRECTION('',(1.,0.,0.)); +#245781 = PLANE('',#245782); +#245782 = AXIS2_PLACEMENT_3D('',#245783,#245784,#245785); +#245783 = CARTESIAN_POINT('',(137.541422,-96.9,0.)); +#245784 = DIRECTION('',(0.,-1.,0.)); +#245785 = DIRECTION('',(1.,0.,0.)); +#245786 = ADVANCED_FACE('',(#245787),#245812,.F.); +#245787 = FACE_BOUND('',#245788,.F.); +#245788 = EDGE_LOOP('',(#245789,#245790,#245798,#245806)); +#245789 = ORIENTED_EDGE('',*,*,#245768,.T.); +#245790 = ORIENTED_EDGE('',*,*,#245791,.T.); +#245791 = EDGE_CURVE('',#245761,#245792,#245794,.T.); +#245792 = VERTEX_POINT('',#245793); +#245793 = CARTESIAN_POINT('',(145.807131,-95.533589,-3.5E-02)); +#245794 = LINE('',#245795,#245796); +#245795 = CARTESIAN_POINT('',(144.438578,-96.9,-3.5E-02)); +#245796 = VECTOR('',#245797,1.); +#245797 = DIRECTION('',(0.707660364028,0.706552764614,0.)); +#245798 = ORIENTED_EDGE('',*,*,#245799,.F.); +#245799 = EDGE_CURVE('',#245800,#245792,#245802,.T.); +#245800 = VERTEX_POINT('',#245801); +#245801 = CARTESIAN_POINT('',(145.807131,-95.533589,0.)); +#245802 = LINE('',#245803,#245804); +#245803 = CARTESIAN_POINT('',(145.807131,-95.533589,0.)); +#245804 = VECTOR('',#245805,1.); +#245805 = DIRECTION('',(0.,0.,-1.)); +#245806 = ORIENTED_EDGE('',*,*,#245807,.F.); +#245807 = EDGE_CURVE('',#245769,#245800,#245808,.T.); +#245808 = LINE('',#245809,#245810); +#245809 = CARTESIAN_POINT('',(144.438578,-96.9,0.)); +#245810 = VECTOR('',#245811,1.); +#245811 = DIRECTION('',(0.707660364028,0.706552764614,0.)); +#245812 = PLANE('',#245813); +#245813 = AXIS2_PLACEMENT_3D('',#245814,#245815,#245816); +#245814 = CARTESIAN_POINT('',(144.438578,-96.9,0.)); +#245815 = DIRECTION('',(0.706552764614,-0.707660364028,0.)); +#245816 = DIRECTION('',(0.707660364028,0.706552764614,0.)); +#245817 = ADVANCED_FACE('',(#245818),#245845,.F.); +#245818 = FACE_BOUND('',#245819,.F.); +#245819 = EDGE_LOOP('',(#245820,#245821,#245830,#245838)); +#245820 = ORIENTED_EDGE('',*,*,#245799,.T.); +#245821 = ORIENTED_EDGE('',*,*,#245822,.T.); +#245822 = EDGE_CURVE('',#245792,#245823,#245825,.T.); +#245823 = VERTEX_POINT('',#245824); +#245824 = CARTESIAN_POINT('',(145.946046,-95.672657,-3.5E-02)); +#245825 = CIRCLE('',#245826,0.319757137893); +#245826 = AXIS2_PLACEMENT_3D('',#245827,#245828,#245829); +#245827 = CARTESIAN_POINT('',(146.09186416329,-95.38808417894,-3.5E-02) + ); +#245828 = DIRECTION('',(0.,0.,1.)); +#245829 = DIRECTION('',(-0.890466949932,-0.455047921739,0.)); +#245830 = ORIENTED_EDGE('',*,*,#245831,.F.); +#245831 = EDGE_CURVE('',#245832,#245823,#245834,.T.); +#245832 = VERTEX_POINT('',#245833); +#245833 = CARTESIAN_POINT('',(145.946046,-95.672657,0.)); +#245834 = LINE('',#245835,#245836); +#245835 = CARTESIAN_POINT('',(145.946046,-95.672657,0.)); +#245836 = VECTOR('',#245837,1.); +#245837 = DIRECTION('',(0.,0.,-1.)); +#245838 = ORIENTED_EDGE('',*,*,#245839,.F.); +#245839 = EDGE_CURVE('',#245800,#245832,#245840,.T.); +#245840 = CIRCLE('',#245841,0.319757137893); +#245841 = AXIS2_PLACEMENT_3D('',#245842,#245843,#245844); +#245842 = CARTESIAN_POINT('',(146.09186416329,-95.38808417894,0.)); +#245843 = DIRECTION('',(0.,0.,1.)); +#245844 = DIRECTION('',(-0.890466949932,-0.455047921739,0.)); +#245845 = CYLINDRICAL_SURFACE('',#245846,0.319757137893); +#245846 = AXIS2_PLACEMENT_3D('',#245847,#245848,#245849); +#245847 = CARTESIAN_POINT('',(146.09186416329,-95.38808417894,0.)); +#245848 = DIRECTION('',(0.,0.,1.)); +#245849 = DIRECTION('',(-0.890466949932,-0.455047921739,0.)); +#245850 = ADVANCED_FACE('',(#245851),#245876,.F.); +#245851 = FACE_BOUND('',#245852,.F.); +#245852 = EDGE_LOOP('',(#245853,#245854,#245862,#245870)); +#245853 = ORIENTED_EDGE('',*,*,#245831,.T.); +#245854 = ORIENTED_EDGE('',*,*,#245855,.T.); +#245855 = EDGE_CURVE('',#245823,#245856,#245858,.T.); +#245856 = VERTEX_POINT('',#245857); +#245857 = CARTESIAN_POINT('',(144.535557,-97.083147,-3.5E-02)); +#245858 = LINE('',#245859,#245860); +#245859 = CARTESIAN_POINT('',(145.946046,-95.672657,-3.5E-02)); +#245860 = VECTOR('',#245861,1.); +#245861 = DIRECTION('',(-0.707106530526,-0.707107031847,0.)); +#245862 = ORIENTED_EDGE('',*,*,#245863,.F.); +#245863 = EDGE_CURVE('',#245864,#245856,#245866,.T.); +#245864 = VERTEX_POINT('',#245865); +#245865 = CARTESIAN_POINT('',(144.535557,-97.083147,0.)); +#245866 = LINE('',#245867,#245868); +#245867 = CARTESIAN_POINT('',(144.535557,-97.083147,0.)); +#245868 = VECTOR('',#245869,1.); +#245869 = DIRECTION('',(0.,0.,-1.)); +#245870 = ORIENTED_EDGE('',*,*,#245871,.F.); +#245871 = EDGE_CURVE('',#245832,#245864,#245872,.T.); +#245872 = LINE('',#245873,#245874); +#245873 = CARTESIAN_POINT('',(145.946046,-95.672657,0.)); +#245874 = VECTOR('',#245875,1.); +#245875 = DIRECTION('',(-0.707106530526,-0.707107031847,0.)); +#245876 = PLANE('',#245877); +#245877 = AXIS2_PLACEMENT_3D('',#245878,#245879,#245880); +#245878 = CARTESIAN_POINT('',(145.946046,-95.672657,0.)); +#245879 = DIRECTION('',(-0.707107031847,0.707106530526,0.)); +#245880 = DIRECTION('',(-0.707106530526,-0.707107031847,0.)); +#245881 = ADVANCED_FACE('',(#245882),#245907,.F.); +#245882 = FACE_BOUND('',#245883,.F.); +#245883 = EDGE_LOOP('',(#245884,#245885,#245893,#245901)); +#245884 = ORIENTED_EDGE('',*,*,#245863,.T.); +#245885 = ORIENTED_EDGE('',*,*,#245886,.T.); +#245886 = EDGE_CURVE('',#245856,#245887,#245889,.T.); +#245887 = VERTEX_POINT('',#245888); +#245888 = CARTESIAN_POINT('',(144.499509,-97.098079,-3.5E-02)); +#245889 = LINE('',#245890,#245891); +#245890 = CARTESIAN_POINT('',(144.535557,-97.083147,-3.5E-02)); +#245891 = VECTOR('',#245892,1.); +#245892 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#245893 = ORIENTED_EDGE('',*,*,#245894,.F.); +#245894 = EDGE_CURVE('',#245895,#245887,#245897,.T.); +#245895 = VERTEX_POINT('',#245896); +#245896 = CARTESIAN_POINT('',(144.499509,-97.098079,0.)); +#245897 = LINE('',#245898,#245899); +#245898 = CARTESIAN_POINT('',(144.499509,-97.098079,0.)); +#245899 = VECTOR('',#245900,1.); +#245900 = DIRECTION('',(0.,0.,-1.)); +#245901 = ORIENTED_EDGE('',*,*,#245902,.F.); +#245902 = EDGE_CURVE('',#245864,#245895,#245903,.T.); +#245903 = LINE('',#245904,#245905); +#245904 = CARTESIAN_POINT('',(144.535557,-97.083147,0.)); +#245905 = VECTOR('',#245906,1.); +#245906 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#245907 = PLANE('',#245908); +#245908 = AXIS2_PLACEMENT_3D('',#245909,#245910,#245911); +#245909 = CARTESIAN_POINT('',(144.535557,-97.083147,0.)); +#245910 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#245911 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#245912 = ADVANCED_FACE('',(#245913),#245938,.F.); +#245913 = FACE_BOUND('',#245914,.F.); +#245914 = EDGE_LOOP('',(#245915,#245916,#245924,#245932)); +#245915 = ORIENTED_EDGE('',*,*,#245894,.T.); +#245916 = ORIENTED_EDGE('',*,*,#245917,.T.); +#245917 = EDGE_CURVE('',#245887,#245918,#245920,.T.); +#245918 = VERTEX_POINT('',#245919); +#245919 = CARTESIAN_POINT('',(137.480491,-97.098079,-3.5E-02)); +#245920 = LINE('',#245921,#245922); +#245921 = CARTESIAN_POINT('',(144.499509,-97.098079,-3.5E-02)); +#245922 = VECTOR('',#245923,1.); +#245923 = DIRECTION('',(-1.,0.,0.)); +#245924 = ORIENTED_EDGE('',*,*,#245925,.F.); +#245925 = EDGE_CURVE('',#245926,#245918,#245928,.T.); +#245926 = VERTEX_POINT('',#245927); +#245927 = CARTESIAN_POINT('',(137.480491,-97.098079,0.)); +#245928 = LINE('',#245929,#245930); +#245929 = CARTESIAN_POINT('',(137.480491,-97.098079,0.)); +#245930 = VECTOR('',#245931,1.); +#245931 = DIRECTION('',(0.,0.,-1.)); +#245932 = ORIENTED_EDGE('',*,*,#245933,.F.); +#245933 = EDGE_CURVE('',#245895,#245926,#245934,.T.); +#245934 = LINE('',#245935,#245936); +#245935 = CARTESIAN_POINT('',(144.499509,-97.098079,0.)); +#245936 = VECTOR('',#245937,1.); +#245937 = DIRECTION('',(-1.,0.,0.)); +#245938 = PLANE('',#245939); +#245939 = AXIS2_PLACEMENT_3D('',#245940,#245941,#245942); +#245940 = CARTESIAN_POINT('',(144.499509,-97.098079,0.)); +#245941 = DIRECTION('',(0.,1.,0.)); +#245942 = DIRECTION('',(-1.,0.,0.)); +#245943 = ADVANCED_FACE('',(#245944),#245969,.F.); +#245944 = FACE_BOUND('',#245945,.F.); +#245945 = EDGE_LOOP('',(#245946,#245947,#245955,#245963)); +#245946 = ORIENTED_EDGE('',*,*,#245925,.T.); +#245947 = ORIENTED_EDGE('',*,*,#245948,.T.); +#245948 = EDGE_CURVE('',#245918,#245949,#245951,.T.); +#245949 = VERTEX_POINT('',#245950); +#245950 = CARTESIAN_POINT('',(137.444443,-97.083147,-3.5E-02)); +#245951 = LINE('',#245952,#245953); +#245952 = CARTESIAN_POINT('',(137.480491,-97.098079,-3.5E-02)); +#245953 = VECTOR('',#245954,1.); +#245954 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#245955 = ORIENTED_EDGE('',*,*,#245956,.F.); +#245956 = EDGE_CURVE('',#245957,#245949,#245959,.T.); +#245957 = VERTEX_POINT('',#245958); +#245958 = CARTESIAN_POINT('',(137.444443,-97.083147,0.)); +#245959 = LINE('',#245960,#245961); +#245960 = CARTESIAN_POINT('',(137.444443,-97.083147,0.)); +#245961 = VECTOR('',#245962,1.); +#245962 = DIRECTION('',(0.,0.,-1.)); +#245963 = ORIENTED_EDGE('',*,*,#245964,.F.); +#245964 = EDGE_CURVE('',#245926,#245957,#245965,.T.); +#245965 = LINE('',#245966,#245967); +#245966 = CARTESIAN_POINT('',(137.480491,-97.098079,0.)); +#245967 = VECTOR('',#245968,1.); +#245968 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#245969 = PLANE('',#245970); +#245970 = AXIS2_PLACEMENT_3D('',#245971,#245972,#245973); +#245971 = CARTESIAN_POINT('',(137.480491,-97.098079,0.)); +#245972 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#245973 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#245974 = ADVANCED_FACE('',(#245975),#246000,.F.); +#245975 = FACE_BOUND('',#245976,.F.); +#245976 = EDGE_LOOP('',(#245977,#245978,#245986,#245994)); +#245977 = ORIENTED_EDGE('',*,*,#245956,.T.); +#245978 = ORIENTED_EDGE('',*,*,#245979,.T.); +#245979 = EDGE_CURVE('',#245949,#245980,#245982,.T.); +#245980 = VERTEX_POINT('',#245981); +#245981 = CARTESIAN_POINT('',(134.316853,-93.955557,-3.5E-02)); +#245982 = LINE('',#245983,#245984); +#245983 = CARTESIAN_POINT('',(137.444443,-97.083147,-3.5E-02)); +#245984 = VECTOR('',#245985,1.); +#245985 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#245986 = ORIENTED_EDGE('',*,*,#245987,.F.); +#245987 = EDGE_CURVE('',#245988,#245980,#245990,.T.); +#245988 = VERTEX_POINT('',#245989); +#245989 = CARTESIAN_POINT('',(134.316853,-93.955557,0.)); +#245990 = LINE('',#245991,#245992); +#245991 = CARTESIAN_POINT('',(134.316853,-93.955557,0.)); +#245992 = VECTOR('',#245993,1.); +#245993 = DIRECTION('',(0.,0.,-1.)); +#245994 = ORIENTED_EDGE('',*,*,#245995,.F.); +#245995 = EDGE_CURVE('',#245957,#245988,#245996,.T.); +#245996 = LINE('',#245997,#245998); +#245997 = CARTESIAN_POINT('',(137.444443,-97.083147,0.)); +#245998 = VECTOR('',#245999,1.); +#245999 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246000 = PLANE('',#246001); +#246001 = AXIS2_PLACEMENT_3D('',#246002,#246003,#246004); +#246002 = CARTESIAN_POINT('',(137.444443,-97.083147,0.)); +#246003 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246004 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246005 = ADVANCED_FACE('',(#246006),#246031,.F.); +#246006 = FACE_BOUND('',#246007,.F.); +#246007 = EDGE_LOOP('',(#246008,#246009,#246017,#246025)); +#246008 = ORIENTED_EDGE('',*,*,#245987,.T.); +#246009 = ORIENTED_EDGE('',*,*,#246010,.T.); +#246010 = EDGE_CURVE('',#245980,#246011,#246013,.T.); +#246011 = VERTEX_POINT('',#246012); +#246012 = CARTESIAN_POINT('',(134.301921,-93.919509,-3.5E-02)); +#246013 = LINE('',#246014,#246015); +#246014 = CARTESIAN_POINT('',(134.316853,-93.955557,-3.5E-02)); +#246015 = VECTOR('',#246016,1.); +#246016 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#246017 = ORIENTED_EDGE('',*,*,#246018,.F.); +#246018 = EDGE_CURVE('',#246019,#246011,#246021,.T.); +#246019 = VERTEX_POINT('',#246020); +#246020 = CARTESIAN_POINT('',(134.301921,-93.919509,0.)); +#246021 = LINE('',#246022,#246023); +#246022 = CARTESIAN_POINT('',(134.301921,-93.919509,0.)); +#246023 = VECTOR('',#246024,1.); +#246024 = DIRECTION('',(0.,0.,-1.)); +#246025 = ORIENTED_EDGE('',*,*,#246026,.F.); +#246026 = EDGE_CURVE('',#245988,#246019,#246027,.T.); +#246027 = LINE('',#246028,#246029); +#246028 = CARTESIAN_POINT('',(134.316853,-93.955557,0.)); +#246029 = VECTOR('',#246030,1.); +#246030 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#246031 = PLANE('',#246032); +#246032 = AXIS2_PLACEMENT_3D('',#246033,#246034,#246035); +#246033 = CARTESIAN_POINT('',(134.316853,-93.955557,0.)); +#246034 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#246035 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#246036 = ADVANCED_FACE('',(#246037),#246062,.F.); +#246037 = FACE_BOUND('',#246038,.F.); +#246038 = EDGE_LOOP('',(#246039,#246040,#246048,#246056)); +#246039 = ORIENTED_EDGE('',*,*,#246018,.T.); +#246040 = ORIENTED_EDGE('',*,*,#246041,.T.); +#246041 = EDGE_CURVE('',#246011,#246042,#246044,.T.); +#246042 = VERTEX_POINT('',#246043); +#246043 = CARTESIAN_POINT('',(134.3,-93.375735,-3.5E-02)); +#246044 = LINE('',#246045,#246046); +#246045 = CARTESIAN_POINT('',(134.301921,-93.919509,-3.5E-02)); +#246046 = VECTOR('',#246047,1.); +#246047 = DIRECTION('',(-3.53269559222E-03,0.999993760011,0.)); +#246048 = ORIENTED_EDGE('',*,*,#246049,.F.); +#246049 = EDGE_CURVE('',#246050,#246042,#246052,.T.); +#246050 = VERTEX_POINT('',#246051); +#246051 = CARTESIAN_POINT('',(134.3,-93.375735,0.)); +#246052 = LINE('',#246053,#246054); +#246053 = CARTESIAN_POINT('',(134.3,-93.375735,0.)); +#246054 = VECTOR('',#246055,1.); +#246055 = DIRECTION('',(0.,0.,-1.)); +#246056 = ORIENTED_EDGE('',*,*,#246057,.F.); +#246057 = EDGE_CURVE('',#246019,#246050,#246058,.T.); +#246058 = LINE('',#246059,#246060); +#246059 = CARTESIAN_POINT('',(134.301921,-93.919509,0.)); +#246060 = VECTOR('',#246061,1.); +#246061 = DIRECTION('',(-3.53269559222E-03,0.999993760011,0.)); +#246062 = PLANE('',#246063); +#246063 = AXIS2_PLACEMENT_3D('',#246064,#246065,#246066); +#246064 = CARTESIAN_POINT('',(134.301921,-93.919509,0.)); +#246065 = DIRECTION('',(0.999993760011,3.53269559222E-03,0.)); +#246066 = DIRECTION('',(-3.53269559222E-03,0.999993760011,0.)); +#246067 = ADVANCED_FACE('',(#246068),#246093,.F.); +#246068 = FACE_BOUND('',#246069,.F.); +#246069 = EDGE_LOOP('',(#246070,#246071,#246079,#246087)); +#246070 = ORIENTED_EDGE('',*,*,#246049,.T.); +#246071 = ORIENTED_EDGE('',*,*,#246072,.T.); +#246072 = EDGE_CURVE('',#246042,#246073,#246075,.T.); +#246073 = VERTEX_POINT('',#246074); +#246074 = CARTESIAN_POINT('',(134.266852,-93.339871,-3.5E-02)); +#246075 = LINE('',#246076,#246077); +#246076 = CARTESIAN_POINT('',(134.3,-93.375735,-3.5E-02)); +#246077 = VECTOR('',#246078,1.); +#246078 = DIRECTION('',(-0.67875281744,0.734366810808,0.)); +#246079 = ORIENTED_EDGE('',*,*,#246080,.F.); +#246080 = EDGE_CURVE('',#246081,#246073,#246083,.T.); +#246081 = VERTEX_POINT('',#246082); +#246082 = CARTESIAN_POINT('',(134.266852,-93.339871,0.)); +#246083 = LINE('',#246084,#246085); +#246084 = CARTESIAN_POINT('',(134.266852,-93.339871,0.)); +#246085 = VECTOR('',#246086,1.); +#246086 = DIRECTION('',(0.,0.,-1.)); +#246087 = ORIENTED_EDGE('',*,*,#246088,.F.); +#246088 = EDGE_CURVE('',#246050,#246081,#246089,.T.); +#246089 = LINE('',#246090,#246091); +#246090 = CARTESIAN_POINT('',(134.3,-93.375735,0.)); +#246091 = VECTOR('',#246092,1.); +#246092 = DIRECTION('',(-0.67875281744,0.734366810808,0.)); +#246093 = PLANE('',#246094); +#246094 = AXIS2_PLACEMENT_3D('',#246095,#246096,#246097); +#246095 = CARTESIAN_POINT('',(134.3,-93.375735,0.)); +#246096 = DIRECTION('',(0.734366810808,0.67875281744,0.)); +#246097 = DIRECTION('',(-0.67875281744,0.734366810808,0.)); +#246098 = ADVANCED_FACE('',(#246099),#246124,.F.); +#246099 = FACE_BOUND('',#246100,.F.); +#246100 = EDGE_LOOP('',(#246101,#246102,#246110,#246118)); +#246101 = ORIENTED_EDGE('',*,*,#246080,.T.); +#246102 = ORIENTED_EDGE('',*,*,#246103,.T.); +#246103 = EDGE_CURVE('',#246073,#246104,#246106,.T.); +#246104 = VERTEX_POINT('',#246105); +#246105 = CARTESIAN_POINT('',(134.251921,-93.303822,-3.5E-02)); +#246106 = LINE('',#246107,#246108); +#246107 = CARTESIAN_POINT('',(134.266852,-93.339871,-3.5E-02)); +#246108 = VECTOR('',#246109,1.); +#246109 = DIRECTION('',(-0.382661891286,0.923888454824,0.)); +#246110 = ORIENTED_EDGE('',*,*,#246111,.F.); +#246111 = EDGE_CURVE('',#246112,#246104,#246114,.T.); +#246112 = VERTEX_POINT('',#246113); +#246113 = CARTESIAN_POINT('',(134.251921,-93.303822,0.)); +#246114 = LINE('',#246115,#246116); +#246115 = CARTESIAN_POINT('',(134.251921,-93.303822,0.)); +#246116 = VECTOR('',#246117,1.); +#246117 = DIRECTION('',(0.,0.,-1.)); +#246118 = ORIENTED_EDGE('',*,*,#246119,.F.); +#246119 = EDGE_CURVE('',#246081,#246112,#246120,.T.); +#246120 = LINE('',#246121,#246122); +#246121 = CARTESIAN_POINT('',(134.266852,-93.339871,0.)); +#246122 = VECTOR('',#246123,1.); +#246123 = DIRECTION('',(-0.382661891286,0.923888454824,0.)); +#246124 = PLANE('',#246125); +#246125 = AXIS2_PLACEMENT_3D('',#246126,#246127,#246128); +#246126 = CARTESIAN_POINT('',(134.266852,-93.339871,0.)); +#246127 = DIRECTION('',(0.923888454824,0.382661891286,0.)); +#246128 = DIRECTION('',(-0.382661891286,0.923888454824,0.)); +#246129 = ADVANCED_FACE('',(#246130),#246155,.F.); +#246130 = FACE_BOUND('',#246131,.F.); +#246131 = EDGE_LOOP('',(#246132,#246133,#246141,#246149)); +#246132 = ORIENTED_EDGE('',*,*,#246111,.T.); +#246133 = ORIENTED_EDGE('',*,*,#246134,.T.); +#246134 = EDGE_CURVE('',#246104,#246135,#246137,.T.); +#246135 = VERTEX_POINT('',#246136); +#246136 = CARTESIAN_POINT('',(134.25,-93.042893,-3.5E-02)); +#246137 = LINE('',#246138,#246139); +#246138 = CARTESIAN_POINT('',(134.251921,-93.303822,-3.5E-02)); +#246139 = VECTOR('',#246140,1.); +#246140 = DIRECTION('',(-7.36195647758E-03,0.999972900431,0.)); +#246141 = ORIENTED_EDGE('',*,*,#246142,.F.); +#246142 = EDGE_CURVE('',#246143,#246135,#246145,.T.); +#246143 = VERTEX_POINT('',#246144); +#246144 = CARTESIAN_POINT('',(134.25,-93.042893,0.)); +#246145 = LINE('',#246146,#246147); +#246146 = CARTESIAN_POINT('',(134.25,-93.042893,0.)); +#246147 = VECTOR('',#246148,1.); +#246148 = DIRECTION('',(0.,0.,-1.)); +#246149 = ORIENTED_EDGE('',*,*,#246150,.F.); +#246150 = EDGE_CURVE('',#246112,#246143,#246151,.T.); +#246151 = LINE('',#246152,#246153); +#246152 = CARTESIAN_POINT('',(134.251921,-93.303822,0.)); +#246153 = VECTOR('',#246154,1.); +#246154 = DIRECTION('',(-7.36195647758E-03,0.999972900431,0.)); +#246155 = PLANE('',#246156); +#246156 = AXIS2_PLACEMENT_3D('',#246157,#246158,#246159); +#246157 = CARTESIAN_POINT('',(134.251921,-93.303822,0.)); +#246158 = DIRECTION('',(0.999972900431,7.36195647758E-03,0.)); +#246159 = DIRECTION('',(-7.36195647758E-03,0.999972900431,0.)); +#246160 = ADVANCED_FACE('',(#246161),#246186,.F.); +#246161 = FACE_BOUND('',#246162,.F.); +#246162 = EDGE_LOOP('',(#246163,#246164,#246172,#246180)); +#246163 = ORIENTED_EDGE('',*,*,#246142,.T.); +#246164 = ORIENTED_EDGE('',*,*,#246165,.T.); +#246165 = EDGE_CURVE('',#246135,#246166,#246168,.T.); +#246166 = VERTEX_POINT('',#246167); +#246167 = CARTESIAN_POINT('',(133.957107,-92.75,-3.5E-02)); +#246168 = LINE('',#246169,#246170); +#246169 = CARTESIAN_POINT('',(134.25,-93.042893,-3.5E-02)); +#246170 = VECTOR('',#246171,1.); +#246171 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246172 = ORIENTED_EDGE('',*,*,#246173,.F.); +#246173 = EDGE_CURVE('',#246174,#246166,#246176,.T.); +#246174 = VERTEX_POINT('',#246175); +#246175 = CARTESIAN_POINT('',(133.957107,-92.75,0.)); +#246176 = LINE('',#246177,#246178); +#246177 = CARTESIAN_POINT('',(133.957107,-92.75,0.)); +#246178 = VECTOR('',#246179,1.); +#246179 = DIRECTION('',(0.,0.,-1.)); +#246180 = ORIENTED_EDGE('',*,*,#246181,.F.); +#246181 = EDGE_CURVE('',#246143,#246174,#246182,.T.); +#246182 = LINE('',#246183,#246184); +#246183 = CARTESIAN_POINT('',(134.25,-93.042893,0.)); +#246184 = VECTOR('',#246185,1.); +#246185 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246186 = PLANE('',#246187); +#246187 = AXIS2_PLACEMENT_3D('',#246188,#246189,#246190); +#246188 = CARTESIAN_POINT('',(134.25,-93.042893,0.)); +#246189 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246190 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246191 = ADVANCED_FACE('',(#246192),#246217,.F.); +#246192 = FACE_BOUND('',#246193,.F.); +#246193 = EDGE_LOOP('',(#246194,#246195,#246203,#246211)); +#246194 = ORIENTED_EDGE('',*,*,#246173,.T.); +#246195 = ORIENTED_EDGE('',*,*,#246196,.T.); +#246196 = EDGE_CURVE('',#246166,#246197,#246199,.T.); +#246197 = VERTEX_POINT('',#246198); +#246198 = CARTESIAN_POINT('',(133.130491,-92.748079,-3.5E-02)); +#246199 = LINE('',#246200,#246201); +#246200 = CARTESIAN_POINT('',(133.957107,-92.75,-3.5E-02)); +#246201 = VECTOR('',#246202,1.); +#246202 = DIRECTION('',(-0.999997299679,2.3239264818E-03,0.)); +#246203 = ORIENTED_EDGE('',*,*,#246204,.F.); +#246204 = EDGE_CURVE('',#246205,#246197,#246207,.T.); +#246205 = VERTEX_POINT('',#246206); +#246206 = CARTESIAN_POINT('',(133.130491,-92.748079,0.)); +#246207 = LINE('',#246208,#246209); +#246208 = CARTESIAN_POINT('',(133.130491,-92.748079,0.)); +#246209 = VECTOR('',#246210,1.); +#246210 = DIRECTION('',(0.,0.,-1.)); +#246211 = ORIENTED_EDGE('',*,*,#246212,.F.); +#246212 = EDGE_CURVE('',#246174,#246205,#246213,.T.); +#246213 = LINE('',#246214,#246215); +#246214 = CARTESIAN_POINT('',(133.957107,-92.75,0.)); +#246215 = VECTOR('',#246216,1.); +#246216 = DIRECTION('',(-0.999997299679,2.3239264818E-03,0.)); +#246217 = PLANE('',#246218); +#246218 = AXIS2_PLACEMENT_3D('',#246219,#246220,#246221); +#246219 = CARTESIAN_POINT('',(133.957107,-92.75,0.)); +#246220 = DIRECTION('',(2.3239264818E-03,0.999997299679,0.)); +#246221 = DIRECTION('',(-0.999997299679,2.3239264818E-03,0.)); +#246222 = ADVANCED_FACE('',(#246223),#246250,.T.); +#246223 = FACE_BOUND('',#246224,.F.); +#246224 = EDGE_LOOP('',(#246225,#246226,#246235,#246243)); +#246225 = ORIENTED_EDGE('',*,*,#246204,.T.); +#246226 = ORIENTED_EDGE('',*,*,#246227,.T.); +#246227 = EDGE_CURVE('',#246197,#246228,#246230,.T.); +#246228 = VERTEX_POINT('',#246229); +#246229 = CARTESIAN_POINT('',(133.051921,-92.669509,-3.5E-02)); +#246230 = CIRCLE('',#246231,0.100002891901); +#246231 = AXIS2_PLACEMENT_3D('',#246232,#246233,#246234); +#246232 = CARTESIAN_POINT('',(133.15000207103,-92.64999792896,-3.5E-02) + ); +#246233 = DIRECTION('',(0.,0.,-1.)); +#246234 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#246235 = ORIENTED_EDGE('',*,*,#246236,.F.); +#246236 = EDGE_CURVE('',#246237,#246228,#246239,.T.); +#246237 = VERTEX_POINT('',#246238); +#246238 = CARTESIAN_POINT('',(133.051921,-92.669509,0.)); +#246239 = LINE('',#246240,#246241); +#246240 = CARTESIAN_POINT('',(133.051921,-92.669509,0.)); +#246241 = VECTOR('',#246242,1.); +#246242 = DIRECTION('',(0.,0.,-1.)); +#246243 = ORIENTED_EDGE('',*,*,#246244,.F.); +#246244 = EDGE_CURVE('',#246205,#246237,#246245,.T.); +#246245 = CIRCLE('',#246246,0.100002891901); +#246246 = AXIS2_PLACEMENT_3D('',#246247,#246248,#246249); +#246247 = CARTESIAN_POINT('',(133.15000207103,-92.64999792896,0.)); +#246248 = DIRECTION('',(0.,0.,-1.)); +#246249 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#246250 = CYLINDRICAL_SURFACE('',#246251,0.100002891901); +#246251 = AXIS2_PLACEMENT_3D('',#246252,#246253,#246254); +#246252 = CARTESIAN_POINT('',(133.15000207103,-92.64999792896,0.)); +#246253 = DIRECTION('',(-0.,-0.,1.)); +#246254 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#246255 = ADVANCED_FACE('',(#246256),#246281,.F.); +#246256 = FACE_BOUND('',#246257,.F.); +#246257 = EDGE_LOOP('',(#246258,#246259,#246267,#246275)); +#246258 = ORIENTED_EDGE('',*,*,#246236,.T.); +#246259 = ORIENTED_EDGE('',*,*,#246260,.T.); +#246260 = EDGE_CURVE('',#246228,#246261,#246263,.T.); +#246261 = VERTEX_POINT('',#246262); +#246262 = CARTESIAN_POINT('',(133.051921,-83.824525,-3.5E-02)); +#246263 = LINE('',#246264,#246265); +#246264 = CARTESIAN_POINT('',(133.051921,-92.669509,-3.5E-02)); +#246265 = VECTOR('',#246266,1.); +#246266 = DIRECTION('',(0.,1.,0.)); +#246267 = ORIENTED_EDGE('',*,*,#246268,.F.); +#246268 = EDGE_CURVE('',#246269,#246261,#246271,.T.); +#246269 = VERTEX_POINT('',#246270); +#246270 = CARTESIAN_POINT('',(133.051921,-83.824525,0.)); +#246271 = LINE('',#246272,#246273); +#246272 = CARTESIAN_POINT('',(133.051921,-83.824525,0.)); +#246273 = VECTOR('',#246274,1.); +#246274 = DIRECTION('',(0.,0.,-1.)); +#246275 = ORIENTED_EDGE('',*,*,#246276,.F.); +#246276 = EDGE_CURVE('',#246237,#246269,#246277,.T.); +#246277 = LINE('',#246278,#246279); +#246278 = CARTESIAN_POINT('',(133.051921,-92.669509,0.)); +#246279 = VECTOR('',#246280,1.); +#246280 = DIRECTION('',(0.,1.,0.)); +#246281 = PLANE('',#246282); +#246282 = AXIS2_PLACEMENT_3D('',#246283,#246284,#246285); +#246283 = CARTESIAN_POINT('',(133.051921,-92.669509,0.)); +#246284 = DIRECTION('',(1.,-0.,0.)); +#246285 = DIRECTION('',(0.,1.,0.)); +#246286 = ADVANCED_FACE('',(#246287),#246312,.F.); +#246287 = FACE_BOUND('',#246288,.F.); +#246288 = EDGE_LOOP('',(#246289,#246290,#246298,#246306)); +#246289 = ORIENTED_EDGE('',*,*,#246268,.T.); +#246290 = ORIENTED_EDGE('',*,*,#246291,.T.); +#246291 = EDGE_CURVE('',#246261,#246292,#246294,.T.); +#246292 = VERTEX_POINT('',#246293); +#246293 = CARTESIAN_POINT('',(133.066853,-83.788477,-3.5E-02)); +#246294 = LINE('',#246295,#246296); +#246295 = CARTESIAN_POINT('',(133.051921,-83.824525,-3.5E-02)); +#246296 = VECTOR('',#246297,1.); +#246297 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#246298 = ORIENTED_EDGE('',*,*,#246299,.F.); +#246299 = EDGE_CURVE('',#246300,#246292,#246302,.T.); +#246300 = VERTEX_POINT('',#246301); +#246301 = CARTESIAN_POINT('',(133.066853,-83.788477,0.)); +#246302 = LINE('',#246303,#246304); +#246303 = CARTESIAN_POINT('',(133.066853,-83.788477,0.)); +#246304 = VECTOR('',#246305,1.); +#246305 = DIRECTION('',(0.,0.,-1.)); +#246306 = ORIENTED_EDGE('',*,*,#246307,.F.); +#246307 = EDGE_CURVE('',#246269,#246300,#246308,.T.); +#246308 = LINE('',#246309,#246310); +#246309 = CARTESIAN_POINT('',(133.051921,-83.824525,0.)); +#246310 = VECTOR('',#246311,1.); +#246311 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#246312 = PLANE('',#246313); +#246313 = AXIS2_PLACEMENT_3D('',#246314,#246315,#246316); +#246314 = CARTESIAN_POINT('',(133.051921,-83.824525,0.)); +#246315 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#246316 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#246317 = ADVANCED_FACE('',(#246318),#246343,.F.); +#246318 = FACE_BOUND('',#246319,.F.); +#246319 = EDGE_LOOP('',(#246320,#246321,#246329,#246337)); +#246320 = ORIENTED_EDGE('',*,*,#246299,.T.); +#246321 = ORIENTED_EDGE('',*,*,#246322,.T.); +#246322 = EDGE_CURVE('',#246292,#246323,#246325,.T.); +#246323 = VERTEX_POINT('',#246324); +#246324 = CARTESIAN_POINT('',(134.7,-82.152612,-3.5E-02)); +#246325 = LINE('',#246326,#246327); +#246326 = CARTESIAN_POINT('',(133.066853,-83.788477,-3.5E-02)); +#246327 = VECTOR('',#246328,1.); +#246328 = DIRECTION('',(0.706518617378,0.707694456174,0.)); +#246329 = ORIENTED_EDGE('',*,*,#246330,.F.); +#246330 = EDGE_CURVE('',#246331,#246323,#246333,.T.); +#246331 = VERTEX_POINT('',#246332); +#246332 = CARTESIAN_POINT('',(134.7,-82.152612,0.)); +#246333 = LINE('',#246334,#246335); +#246334 = CARTESIAN_POINT('',(134.7,-82.152612,0.)); +#246335 = VECTOR('',#246336,1.); +#246336 = DIRECTION('',(0.,0.,-1.)); +#246337 = ORIENTED_EDGE('',*,*,#246338,.F.); +#246338 = EDGE_CURVE('',#246300,#246331,#246339,.T.); +#246339 = LINE('',#246340,#246341); +#246340 = CARTESIAN_POINT('',(133.066853,-83.788477,0.)); +#246341 = VECTOR('',#246342,1.); +#246342 = DIRECTION('',(0.706518617378,0.707694456174,0.)); +#246343 = PLANE('',#246344); +#246344 = AXIS2_PLACEMENT_3D('',#246345,#246346,#246347); +#246345 = CARTESIAN_POINT('',(133.066853,-83.788477,0.)); +#246346 = DIRECTION('',(0.707694456174,-0.706518617378,0.)); +#246347 = DIRECTION('',(0.706518617378,0.707694456174,0.)); +#246348 = ADVANCED_FACE('',(#246349),#246374,.F.); +#246349 = FACE_BOUND('',#246350,.F.); +#246350 = EDGE_LOOP('',(#246351,#246352,#246360,#246368)); +#246351 = ORIENTED_EDGE('',*,*,#246330,.T.); +#246352 = ORIENTED_EDGE('',*,*,#246353,.T.); +#246353 = EDGE_CURVE('',#246323,#246354,#246356,.T.); +#246354 = VERTEX_POINT('',#246355); +#246355 = CARTESIAN_POINT('',(134.7,-81.034113,-3.5E-02)); +#246356 = LINE('',#246357,#246358); +#246357 = CARTESIAN_POINT('',(134.7,-82.152612,-3.5E-02)); +#246358 = VECTOR('',#246359,1.); +#246359 = DIRECTION('',(0.,1.,0.)); +#246360 = ORIENTED_EDGE('',*,*,#246361,.F.); +#246361 = EDGE_CURVE('',#246362,#246354,#246364,.T.); +#246362 = VERTEX_POINT('',#246363); +#246363 = CARTESIAN_POINT('',(134.7,-81.034113,0.)); +#246364 = LINE('',#246365,#246366); +#246365 = CARTESIAN_POINT('',(134.7,-81.034113,0.)); +#246366 = VECTOR('',#246367,1.); +#246367 = DIRECTION('',(0.,0.,-1.)); +#246368 = ORIENTED_EDGE('',*,*,#246369,.F.); +#246369 = EDGE_CURVE('',#246331,#246362,#246370,.T.); +#246370 = LINE('',#246371,#246372); +#246371 = CARTESIAN_POINT('',(134.7,-82.152612,0.)); +#246372 = VECTOR('',#246373,1.); +#246373 = DIRECTION('',(0.,1.,0.)); +#246374 = PLANE('',#246375); +#246375 = AXIS2_PLACEMENT_3D('',#246376,#246377,#246378); +#246376 = CARTESIAN_POINT('',(134.7,-82.152612,0.)); +#246377 = DIRECTION('',(1.,-0.,0.)); +#246378 = DIRECTION('',(0.,1.,0.)); +#246379 = ADVANCED_FACE('',(#246380),#246405,.F.); +#246380 = FACE_BOUND('',#246381,.F.); +#246381 = EDGE_LOOP('',(#246382,#246383,#246391,#246399)); +#246382 = ORIENTED_EDGE('',*,*,#246361,.T.); +#246383 = ORIENTED_EDGE('',*,*,#246384,.T.); +#246384 = EDGE_CURVE('',#246354,#246385,#246387,.T.); +#246385 = VERTEX_POINT('',#246386); +#246386 = CARTESIAN_POINT('',(134.685195,-81.030147,-3.5E-02)); +#246387 = LINE('',#246388,#246389); +#246388 = CARTESIAN_POINT('',(134.7,-81.034113,-3.5E-02)); +#246389 = VECTOR('',#246390,1.); +#246390 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#246391 = ORIENTED_EDGE('',*,*,#246392,.F.); +#246392 = EDGE_CURVE('',#246393,#246385,#246395,.T.); +#246393 = VERTEX_POINT('',#246394); +#246394 = CARTESIAN_POINT('',(134.685195,-81.030147,0.)); +#246395 = LINE('',#246396,#246397); +#246396 = CARTESIAN_POINT('',(134.685195,-81.030147,0.)); +#246397 = VECTOR('',#246398,1.); +#246398 = DIRECTION('',(0.,0.,-1.)); +#246399 = ORIENTED_EDGE('',*,*,#246400,.F.); +#246400 = EDGE_CURVE('',#246362,#246393,#246401,.T.); +#246401 = LINE('',#246402,#246403); +#246402 = CARTESIAN_POINT('',(134.7,-81.034113,0.)); +#246403 = VECTOR('',#246404,1.); +#246404 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#246405 = PLANE('',#246406); +#246406 = AXIS2_PLACEMENT_3D('',#246407,#246408,#246409); +#246407 = CARTESIAN_POINT('',(134.7,-81.034113,0.)); +#246408 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#246409 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#246410 = ADVANCED_FACE('',(#246411),#246438,.T.); +#246411 = FACE_BOUND('',#246412,.F.); +#246412 = EDGE_LOOP('',(#246413,#246414,#246423,#246431)); +#246413 = ORIENTED_EDGE('',*,*,#246392,.T.); +#246414 = ORIENTED_EDGE('',*,*,#246415,.T.); +#246415 = EDGE_CURVE('',#246385,#246416,#246418,.T.); +#246416 = VERTEX_POINT('',#246417); +#246417 = CARTESIAN_POINT('',(134.914805,-81.030147,-3.5E-02)); +#246418 = CIRCLE('',#246419,0.299999472923); +#246419 = AXIS2_PLACEMENT_3D('',#246420,#246421,#246422); +#246420 = CARTESIAN_POINT('',(134.8,-80.75298369844,-3.5E-02)); +#246421 = DIRECTION('',(0.,0.,-1.)); +#246422 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#246423 = ORIENTED_EDGE('',*,*,#246424,.F.); +#246424 = EDGE_CURVE('',#246425,#246416,#246427,.T.); +#246425 = VERTEX_POINT('',#246426); +#246426 = CARTESIAN_POINT('',(134.914805,-81.030147,0.)); +#246427 = LINE('',#246428,#246429); +#246428 = CARTESIAN_POINT('',(134.914805,-81.030147,0.)); +#246429 = VECTOR('',#246430,1.); +#246430 = DIRECTION('',(0.,0.,-1.)); +#246431 = ORIENTED_EDGE('',*,*,#246432,.F.); +#246432 = EDGE_CURVE('',#246393,#246425,#246433,.T.); +#246433 = CIRCLE('',#246434,0.299999472923); +#246434 = AXIS2_PLACEMENT_3D('',#246435,#246436,#246437); +#246435 = CARTESIAN_POINT('',(134.8,-80.75298369844,0.)); +#246436 = DIRECTION('',(0.,0.,-1.)); +#246437 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#246438 = CYLINDRICAL_SURFACE('',#246439,0.299999472923); +#246439 = AXIS2_PLACEMENT_3D('',#246440,#246441,#246442); +#246440 = CARTESIAN_POINT('',(134.8,-80.75298369844,0.)); +#246441 = DIRECTION('',(-0.,-0.,1.)); +#246442 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#246443 = ADVANCED_FACE('',(#246444),#246460,.F.); +#246444 = FACE_BOUND('',#246445,.F.); +#246445 = EDGE_LOOP('',(#246446,#246447,#246453,#246454)); +#246446 = ORIENTED_EDGE('',*,*,#246424,.T.); +#246447 = ORIENTED_EDGE('',*,*,#246448,.T.); +#246448 = EDGE_CURVE('',#246416,#245350,#246449,.T.); +#246449 = LINE('',#246450,#246451); +#246450 = CARTESIAN_POINT('',(134.914805,-81.030147,-3.5E-02)); +#246451 = VECTOR('',#246452,1.); +#246452 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#246453 = ORIENTED_EDGE('',*,*,#245347,.F.); +#246454 = ORIENTED_EDGE('',*,*,#246455,.F.); +#246455 = EDGE_CURVE('',#246425,#245348,#246456,.T.); +#246456 = LINE('',#246457,#246458); +#246457 = CARTESIAN_POINT('',(134.914805,-81.030147,0.)); +#246458 = VECTOR('',#246459,1.); +#246459 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#246460 = PLANE('',#246461); +#246461 = AXIS2_PLACEMENT_3D('',#246462,#246463,#246464); +#246462 = CARTESIAN_POINT('',(134.914805,-81.030147,0.)); +#246463 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#246464 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#246465 = ADVANCED_FACE('',(#246466),#246493,.F.); +#246466 = FACE_BOUND('',#246467,.F.); +#246467 = EDGE_LOOP('',(#246468,#246478,#246485,#246486)); +#246468 = ORIENTED_EDGE('',*,*,#246469,.T.); +#246469 = EDGE_CURVE('',#246470,#246472,#246474,.T.); +#246470 = VERTEX_POINT('',#246471); +#246471 = CARTESIAN_POINT('',(134.937255,-80.752983,0.)); +#246472 = VERTEX_POINT('',#246473); +#246473 = CARTESIAN_POINT('',(134.937255,-80.752983,-3.5E-02)); +#246474 = LINE('',#246475,#246476); +#246475 = CARTESIAN_POINT('',(134.937255,-80.752983,0.)); +#246476 = VECTOR('',#246477,1.); +#246477 = DIRECTION('',(0.,0.,-1.)); +#246478 = ORIENTED_EDGE('',*,*,#246479,.T.); +#246479 = EDGE_CURVE('',#246472,#246472,#246480,.T.); +#246480 = CIRCLE('',#246481,0.137255); +#246481 = AXIS2_PLACEMENT_3D('',#246482,#246483,#246484); +#246482 = CARTESIAN_POINT('',(134.8,-80.752983,-3.5E-02)); +#246483 = DIRECTION('',(0.,0.,1.)); +#246484 = DIRECTION('',(1.,0.,-0.)); +#246485 = ORIENTED_EDGE('',*,*,#246469,.F.); +#246486 = ORIENTED_EDGE('',*,*,#246487,.F.); +#246487 = EDGE_CURVE('',#246470,#246470,#246488,.T.); +#246488 = CIRCLE('',#246489,0.137255); +#246489 = AXIS2_PLACEMENT_3D('',#246490,#246491,#246492); +#246490 = CARTESIAN_POINT('',(134.8,-80.752983,0.)); +#246491 = DIRECTION('',(0.,0.,1.)); +#246492 = DIRECTION('',(1.,0.,-0.)); +#246493 = CYLINDRICAL_SURFACE('',#246494,0.137255); +#246494 = AXIS2_PLACEMENT_3D('',#246495,#246496,#246497); +#246495 = CARTESIAN_POINT('',(134.8,-80.752983,0.)); +#246496 = DIRECTION('',(0.,0.,1.)); +#246497 = DIRECTION('',(1.,0.,-0.)); +#246498 = ADVANCED_FACE('',(#246499,#246537),#246540,.F.); +#246499 = FACE_BOUND('',#246500,.F.); +#246500 = EDGE_LOOP('',(#246501,#246502,#246503,#246504,#246505,#246506, + #246507,#246508,#246509,#246510,#246511,#246512,#246513,#246514, + #246515,#246516,#246517,#246518,#246519,#246520,#246521,#246522, + #246523,#246524,#246525,#246526,#246527,#246528,#246529,#246530, + #246531,#246532,#246533,#246534,#246535,#246536)); +#246501 = ORIENTED_EDGE('',*,*,#245373,.T.); +#246502 = ORIENTED_EDGE('',*,*,#245404,.T.); +#246503 = ORIENTED_EDGE('',*,*,#245435,.T.); +#246504 = ORIENTED_EDGE('',*,*,#245466,.T.); +#246505 = ORIENTED_EDGE('',*,*,#245497,.T.); +#246506 = ORIENTED_EDGE('',*,*,#245528,.T.); +#246507 = ORIENTED_EDGE('',*,*,#245559,.T.); +#246508 = ORIENTED_EDGE('',*,*,#245590,.T.); +#246509 = ORIENTED_EDGE('',*,*,#245621,.T.); +#246510 = ORIENTED_EDGE('',*,*,#245652,.T.); +#246511 = ORIENTED_EDGE('',*,*,#245683,.T.); +#246512 = ORIENTED_EDGE('',*,*,#245714,.T.); +#246513 = ORIENTED_EDGE('',*,*,#245745,.T.); +#246514 = ORIENTED_EDGE('',*,*,#245776,.T.); +#246515 = ORIENTED_EDGE('',*,*,#245807,.T.); +#246516 = ORIENTED_EDGE('',*,*,#245839,.T.); +#246517 = ORIENTED_EDGE('',*,*,#245871,.T.); +#246518 = ORIENTED_EDGE('',*,*,#245902,.T.); +#246519 = ORIENTED_EDGE('',*,*,#245933,.T.); +#246520 = ORIENTED_EDGE('',*,*,#245964,.T.); +#246521 = ORIENTED_EDGE('',*,*,#245995,.T.); +#246522 = ORIENTED_EDGE('',*,*,#246026,.T.); +#246523 = ORIENTED_EDGE('',*,*,#246057,.T.); +#246524 = ORIENTED_EDGE('',*,*,#246088,.T.); +#246525 = ORIENTED_EDGE('',*,*,#246119,.T.); +#246526 = ORIENTED_EDGE('',*,*,#246150,.T.); +#246527 = ORIENTED_EDGE('',*,*,#246181,.T.); +#246528 = ORIENTED_EDGE('',*,*,#246212,.T.); +#246529 = ORIENTED_EDGE('',*,*,#246244,.T.); +#246530 = ORIENTED_EDGE('',*,*,#246276,.T.); +#246531 = ORIENTED_EDGE('',*,*,#246307,.T.); +#246532 = ORIENTED_EDGE('',*,*,#246338,.T.); +#246533 = ORIENTED_EDGE('',*,*,#246369,.T.); +#246534 = ORIENTED_EDGE('',*,*,#246400,.T.); +#246535 = ORIENTED_EDGE('',*,*,#246432,.T.); +#246536 = ORIENTED_EDGE('',*,*,#246455,.T.); +#246537 = FACE_BOUND('',#246538,.F.); +#246538 = EDGE_LOOP('',(#246539)); +#246539 = ORIENTED_EDGE('',*,*,#246487,.T.); +#246540 = PLANE('',#246541); +#246541 = AXIS2_PLACEMENT_3D('',#246542,#246543,#246544); +#246542 = CARTESIAN_POINT('',(0.,0.,0.)); +#246543 = DIRECTION('',(-0.,-0.,-1.)); +#246544 = DIRECTION('',(-1.,0.,0.)); +#246545 = ADVANCED_FACE('',(#246546,#246584),#246587,.T.); +#246546 = FACE_BOUND('',#246547,.T.); +#246547 = EDGE_LOOP('',(#246548,#246549,#246550,#246551,#246552,#246553, + #246554,#246555,#246556,#246557,#246558,#246559,#246560,#246561, + #246562,#246563,#246564,#246565,#246566,#246567,#246568,#246569, + #246570,#246571,#246572,#246573,#246574,#246575,#246576,#246577, + #246578,#246579,#246580,#246581,#246582,#246583)); +#246548 = ORIENTED_EDGE('',*,*,#245357,.T.); +#246549 = ORIENTED_EDGE('',*,*,#245388,.T.); +#246550 = ORIENTED_EDGE('',*,*,#245419,.T.); +#246551 = ORIENTED_EDGE('',*,*,#245450,.T.); +#246552 = ORIENTED_EDGE('',*,*,#245481,.T.); +#246553 = ORIENTED_EDGE('',*,*,#245512,.T.); +#246554 = ORIENTED_EDGE('',*,*,#245543,.T.); +#246555 = ORIENTED_EDGE('',*,*,#245574,.T.); +#246556 = ORIENTED_EDGE('',*,*,#245605,.T.); +#246557 = ORIENTED_EDGE('',*,*,#245636,.T.); +#246558 = ORIENTED_EDGE('',*,*,#245667,.T.); +#246559 = ORIENTED_EDGE('',*,*,#245698,.T.); +#246560 = ORIENTED_EDGE('',*,*,#245729,.T.); +#246561 = ORIENTED_EDGE('',*,*,#245760,.T.); +#246562 = ORIENTED_EDGE('',*,*,#245791,.T.); +#246563 = ORIENTED_EDGE('',*,*,#245822,.T.); +#246564 = ORIENTED_EDGE('',*,*,#245855,.T.); +#246565 = ORIENTED_EDGE('',*,*,#245886,.T.); +#246566 = ORIENTED_EDGE('',*,*,#245917,.T.); +#246567 = ORIENTED_EDGE('',*,*,#245948,.T.); +#246568 = ORIENTED_EDGE('',*,*,#245979,.T.); +#246569 = ORIENTED_EDGE('',*,*,#246010,.T.); +#246570 = ORIENTED_EDGE('',*,*,#246041,.T.); +#246571 = ORIENTED_EDGE('',*,*,#246072,.T.); +#246572 = ORIENTED_EDGE('',*,*,#246103,.T.); +#246573 = ORIENTED_EDGE('',*,*,#246134,.T.); +#246574 = ORIENTED_EDGE('',*,*,#246165,.T.); +#246575 = ORIENTED_EDGE('',*,*,#246196,.T.); +#246576 = ORIENTED_EDGE('',*,*,#246227,.T.); +#246577 = ORIENTED_EDGE('',*,*,#246260,.T.); +#246578 = ORIENTED_EDGE('',*,*,#246291,.T.); +#246579 = ORIENTED_EDGE('',*,*,#246322,.T.); +#246580 = ORIENTED_EDGE('',*,*,#246353,.T.); +#246581 = ORIENTED_EDGE('',*,*,#246384,.T.); +#246582 = ORIENTED_EDGE('',*,*,#246415,.T.); +#246583 = ORIENTED_EDGE('',*,*,#246448,.T.); +#246584 = FACE_BOUND('',#246585,.T.); +#246585 = EDGE_LOOP('',(#246586)); +#246586 = ORIENTED_EDGE('',*,*,#246479,.T.); +#246587 = PLANE('',#246588); +#246588 = AXIS2_PLACEMENT_3D('',#246589,#246590,#246591); +#246589 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#246590 = DIRECTION('',(-0.,-0.,-1.)); +#246591 = DIRECTION('',(-1.,0.,0.)); +#246592 = MANIFOLD_SOLID_BREP('',#246593); +#246593 = CLOSED_SHELL('',(#246594,#246636,#246667,#246698,#246729, + #246760,#246791,#246822,#246855,#246886,#246917,#246948,#246979, + #247010,#247041,#247072,#247103,#247134,#247165,#247196,#247227, + #247258,#247289,#247320,#247353,#247384,#247415,#247446,#247477, + #247508,#247539,#247572,#247603,#247634,#247665,#247696,#247727, + #247749,#247794)); +#246594 = ADVANCED_FACE('',(#246595),#246631,.T.); +#246595 = FACE_BOUND('',#246596,.T.); +#246596 = EDGE_LOOP('',(#246597,#246607,#246616,#246624)); +#246597 = ORIENTED_EDGE('',*,*,#246598,.T.); +#246598 = EDGE_CURVE('',#246599,#246601,#246603,.T.); +#246599 = VERTEX_POINT('',#246600); +#246600 = CARTESIAN_POINT('',(136.694443,-152.971853,1.51)); +#246601 = VERTEX_POINT('',#246602); +#246602 = CARTESIAN_POINT('',(136.694443,-152.971853,1.545)); +#246603 = LINE('',#246604,#246605); +#246604 = CARTESIAN_POINT('',(136.694443,-152.971853,1.51)); +#246605 = VECTOR('',#246606,1.); +#246606 = DIRECTION('',(0.,0.,1.)); +#246607 = ORIENTED_EDGE('',*,*,#246608,.T.); +#246608 = EDGE_CURVE('',#246601,#246609,#246611,.T.); +#246609 = VERTEX_POINT('',#246610); +#246610 = CARTESIAN_POINT('',(136.848079,-153.035491,1.545)); +#246611 = CIRCLE('',#246612,0.100000590676); +#246612 = AXIS2_PLACEMENT_3D('',#246613,#246614,#246615); +#246613 = CARTESIAN_POINT('',(136.75,-153.0550006871,1.545)); +#246614 = DIRECTION('',(0.,0.,-1.)); +#246615 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#246616 = ORIENTED_EDGE('',*,*,#246617,.F.); +#246617 = EDGE_CURVE('',#246618,#246609,#246620,.T.); +#246618 = VERTEX_POINT('',#246619); +#246619 = CARTESIAN_POINT('',(136.848079,-153.035491,1.51)); +#246620 = LINE('',#246621,#246622); +#246621 = CARTESIAN_POINT('',(136.848079,-153.035491,1.51)); +#246622 = VECTOR('',#246623,1.); +#246623 = DIRECTION('',(0.,0.,1.)); +#246624 = ORIENTED_EDGE('',*,*,#246625,.F.); +#246625 = EDGE_CURVE('',#246599,#246618,#246626,.T.); +#246626 = CIRCLE('',#246627,0.100000590676); +#246627 = AXIS2_PLACEMENT_3D('',#246628,#246629,#246630); +#246628 = CARTESIAN_POINT('',(136.75,-153.0550006871,1.51)); +#246629 = DIRECTION('',(0.,0.,-1.)); +#246630 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#246631 = CYLINDRICAL_SURFACE('',#246632,0.100000590676); +#246632 = AXIS2_PLACEMENT_3D('',#246633,#246634,#246635); +#246633 = CARTESIAN_POINT('',(136.75,-153.0550006871,1.51)); +#246634 = DIRECTION('',(0.,0.,-1.)); +#246635 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#246636 = ADVANCED_FACE('',(#246637),#246662,.T.); +#246637 = FACE_BOUND('',#246638,.T.); +#246638 = EDGE_LOOP('',(#246639,#246640,#246648,#246656)); +#246639 = ORIENTED_EDGE('',*,*,#246617,.T.); +#246640 = ORIENTED_EDGE('',*,*,#246641,.T.); +#246641 = EDGE_CURVE('',#246609,#246642,#246644,.T.); +#246642 = VERTEX_POINT('',#246643); +#246643 = CARTESIAN_POINT('',(136.848079,-153.831919,1.545)); +#246644 = LINE('',#246645,#246646); +#246645 = CARTESIAN_POINT('',(136.848079,-153.035491,1.545)); +#246646 = VECTOR('',#246647,1.); +#246647 = DIRECTION('',(0.,-1.,0.)); +#246648 = ORIENTED_EDGE('',*,*,#246649,.F.); +#246649 = EDGE_CURVE('',#246650,#246642,#246652,.T.); +#246650 = VERTEX_POINT('',#246651); +#246651 = CARTESIAN_POINT('',(136.848079,-153.831919,1.51)); +#246652 = LINE('',#246653,#246654); +#246653 = CARTESIAN_POINT('',(136.848079,-153.831919,1.51)); +#246654 = VECTOR('',#246655,1.); +#246655 = DIRECTION('',(0.,0.,1.)); +#246656 = ORIENTED_EDGE('',*,*,#246657,.F.); +#246657 = EDGE_CURVE('',#246618,#246650,#246658,.T.); +#246658 = LINE('',#246659,#246660); +#246659 = CARTESIAN_POINT('',(136.848079,-153.035491,1.51)); +#246660 = VECTOR('',#246661,1.); +#246661 = DIRECTION('',(0.,-1.,0.)); +#246662 = PLANE('',#246663); +#246663 = AXIS2_PLACEMENT_3D('',#246664,#246665,#246666); +#246664 = CARTESIAN_POINT('',(136.848079,-153.035491,1.51)); +#246665 = DIRECTION('',(1.,0.,-0.)); +#246666 = DIRECTION('',(0.,-1.,0.)); +#246667 = ADVANCED_FACE('',(#246668),#246693,.T.); +#246668 = FACE_BOUND('',#246669,.T.); +#246669 = EDGE_LOOP('',(#246670,#246671,#246679,#246687)); +#246670 = ORIENTED_EDGE('',*,*,#246649,.T.); +#246671 = ORIENTED_EDGE('',*,*,#246672,.T.); +#246672 = EDGE_CURVE('',#246642,#246673,#246675,.T.); +#246673 = VERTEX_POINT('',#246674); +#246674 = CARTESIAN_POINT('',(136.833148,-153.867967,1.545)); +#246675 = LINE('',#246676,#246677); +#246676 = CARTESIAN_POINT('',(136.848079,-153.831919,1.545)); +#246677 = VECTOR('',#246678,1.); +#246678 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246679 = ORIENTED_EDGE('',*,*,#246680,.F.); +#246680 = EDGE_CURVE('',#246681,#246673,#246683,.T.); +#246681 = VERTEX_POINT('',#246682); +#246682 = CARTESIAN_POINT('',(136.833148,-153.867967,1.51)); +#246683 = LINE('',#246684,#246685); +#246684 = CARTESIAN_POINT('',(136.833148,-153.867967,1.51)); +#246685 = VECTOR('',#246686,1.); +#246686 = DIRECTION('',(0.,0.,1.)); +#246687 = ORIENTED_EDGE('',*,*,#246688,.F.); +#246688 = EDGE_CURVE('',#246650,#246681,#246689,.T.); +#246689 = LINE('',#246690,#246691); +#246690 = CARTESIAN_POINT('',(136.848079,-153.831919,1.51)); +#246691 = VECTOR('',#246692,1.); +#246692 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246693 = PLANE('',#246694); +#246694 = AXIS2_PLACEMENT_3D('',#246695,#246696,#246697); +#246695 = CARTESIAN_POINT('',(136.848079,-153.831919,1.51)); +#246696 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#246697 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246698 = ADVANCED_FACE('',(#246699),#246724,.T.); +#246699 = FACE_BOUND('',#246700,.T.); +#246700 = EDGE_LOOP('',(#246701,#246702,#246710,#246718)); +#246701 = ORIENTED_EDGE('',*,*,#246680,.T.); +#246702 = ORIENTED_EDGE('',*,*,#246703,.T.); +#246703 = EDGE_CURVE('',#246673,#246704,#246706,.T.); +#246704 = VERTEX_POINT('',#246705); +#246705 = CARTESIAN_POINT('',(135.303832,-155.4,1.545)); +#246706 = LINE('',#246707,#246708); +#246707 = CARTESIAN_POINT('',(136.833148,-153.867967,1.545)); +#246708 = VECTOR('',#246709,1.); +#246709 = DIRECTION('',(-0.706478933489,-0.707734071906,0.)); +#246710 = ORIENTED_EDGE('',*,*,#246711,.F.); +#246711 = EDGE_CURVE('',#246712,#246704,#246714,.T.); +#246712 = VERTEX_POINT('',#246713); +#246713 = CARTESIAN_POINT('',(135.303832,-155.4,1.51)); +#246714 = LINE('',#246715,#246716); +#246715 = CARTESIAN_POINT('',(135.303832,-155.4,1.51)); +#246716 = VECTOR('',#246717,1.); +#246717 = DIRECTION('',(0.,0.,1.)); +#246718 = ORIENTED_EDGE('',*,*,#246719,.F.); +#246719 = EDGE_CURVE('',#246681,#246712,#246720,.T.); +#246720 = LINE('',#246721,#246722); +#246721 = CARTESIAN_POINT('',(136.833148,-153.867967,1.51)); +#246722 = VECTOR('',#246723,1.); +#246723 = DIRECTION('',(-0.706478933489,-0.707734071906,0.)); +#246724 = PLANE('',#246725); +#246725 = AXIS2_PLACEMENT_3D('',#246726,#246727,#246728); +#246726 = CARTESIAN_POINT('',(136.833148,-153.867967,1.51)); +#246727 = DIRECTION('',(0.707734071906,-0.706478933489,0.)); +#246728 = DIRECTION('',(-0.706478933489,-0.707734071906,0.)); +#246729 = ADVANCED_FACE('',(#246730),#246755,.T.); +#246730 = FACE_BOUND('',#246731,.T.); +#246731 = EDGE_LOOP('',(#246732,#246733,#246741,#246749)); +#246732 = ORIENTED_EDGE('',*,*,#246711,.T.); +#246733 = ORIENTED_EDGE('',*,*,#246734,.T.); +#246734 = EDGE_CURVE('',#246704,#246735,#246737,.T.); +#246735 = VERTEX_POINT('',#246736); +#246736 = CARTESIAN_POINT('',(136.020988,-155.4,1.545)); +#246737 = LINE('',#246738,#246739); +#246738 = CARTESIAN_POINT('',(135.303832,-155.4,1.545)); +#246739 = VECTOR('',#246740,1.); +#246740 = DIRECTION('',(1.,0.,0.)); +#246741 = ORIENTED_EDGE('',*,*,#246742,.F.); +#246742 = EDGE_CURVE('',#246743,#246735,#246745,.T.); +#246743 = VERTEX_POINT('',#246744); +#246744 = CARTESIAN_POINT('',(136.020988,-155.4,1.51)); +#246745 = LINE('',#246746,#246747); +#246746 = CARTESIAN_POINT('',(136.020988,-155.4,1.51)); +#246747 = VECTOR('',#246748,1.); +#246748 = DIRECTION('',(0.,0.,1.)); +#246749 = ORIENTED_EDGE('',*,*,#246750,.F.); +#246750 = EDGE_CURVE('',#246712,#246743,#246751,.T.); +#246751 = LINE('',#246752,#246753); +#246752 = CARTESIAN_POINT('',(135.303832,-155.4,1.51)); +#246753 = VECTOR('',#246754,1.); +#246754 = DIRECTION('',(1.,0.,0.)); +#246755 = PLANE('',#246756); +#246756 = AXIS2_PLACEMENT_3D('',#246757,#246758,#246759); +#246757 = CARTESIAN_POINT('',(135.303832,-155.4,1.51)); +#246758 = DIRECTION('',(0.,1.,0.)); +#246759 = DIRECTION('',(1.,0.,0.)); +#246760 = ADVANCED_FACE('',(#246761),#246786,.T.); +#246761 = FACE_BOUND('',#246762,.T.); +#246762 = EDGE_LOOP('',(#246763,#246764,#246772,#246780)); +#246763 = ORIENTED_EDGE('',*,*,#246742,.T.); +#246764 = ORIENTED_EDGE('',*,*,#246765,.T.); +#246765 = EDGE_CURVE('',#246735,#246766,#246768,.T.); +#246766 = VERTEX_POINT('',#246767); +#246767 = CARTESIAN_POINT('',(137.65,-153.770988,1.545)); +#246768 = LINE('',#246769,#246770); +#246769 = CARTESIAN_POINT('',(136.020988,-155.4,1.545)); +#246770 = VECTOR('',#246771,1.); +#246771 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246772 = ORIENTED_EDGE('',*,*,#246773,.F.); +#246773 = EDGE_CURVE('',#246774,#246766,#246776,.T.); +#246774 = VERTEX_POINT('',#246775); +#246775 = CARTESIAN_POINT('',(137.65,-153.770988,1.51)); +#246776 = LINE('',#246777,#246778); +#246777 = CARTESIAN_POINT('',(137.65,-153.770988,1.51)); +#246778 = VECTOR('',#246779,1.); +#246779 = DIRECTION('',(0.,0.,1.)); +#246780 = ORIENTED_EDGE('',*,*,#246781,.F.); +#246781 = EDGE_CURVE('',#246743,#246774,#246782,.T.); +#246782 = LINE('',#246783,#246784); +#246783 = CARTESIAN_POINT('',(136.020988,-155.4,1.51)); +#246784 = VECTOR('',#246785,1.); +#246785 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246786 = PLANE('',#246787); +#246787 = AXIS2_PLACEMENT_3D('',#246788,#246789,#246790); +#246788 = CARTESIAN_POINT('',(136.020988,-155.4,1.51)); +#246789 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#246790 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#246791 = ADVANCED_FACE('',(#246792),#246817,.T.); +#246792 = FACE_BOUND('',#246793,.T.); +#246793 = EDGE_LOOP('',(#246794,#246795,#246803,#246811)); +#246794 = ORIENTED_EDGE('',*,*,#246773,.T.); +#246795 = ORIENTED_EDGE('',*,*,#246796,.T.); +#246796 = EDGE_CURVE('',#246766,#246797,#246799,.T.); +#246797 = VERTEX_POINT('',#246798); +#246798 = CARTESIAN_POINT('',(137.651921,-153.035491,1.545)); +#246799 = LINE('',#246800,#246801); +#246800 = CARTESIAN_POINT('',(137.65,-153.770988,1.545)); +#246801 = VECTOR('',#246802,1.); +#246802 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#246803 = ORIENTED_EDGE('',*,*,#246804,.F.); +#246804 = EDGE_CURVE('',#246805,#246797,#246807,.T.); +#246805 = VERTEX_POINT('',#246806); +#246806 = CARTESIAN_POINT('',(137.651921,-153.035491,1.51)); +#246807 = LINE('',#246808,#246809); +#246808 = CARTESIAN_POINT('',(137.651921,-153.035491,1.51)); +#246809 = VECTOR('',#246810,1.); +#246810 = DIRECTION('',(0.,0.,1.)); +#246811 = ORIENTED_EDGE('',*,*,#246812,.F.); +#246812 = EDGE_CURVE('',#246774,#246805,#246813,.T.); +#246813 = LINE('',#246814,#246815); +#246814 = CARTESIAN_POINT('',(137.65,-153.770988,1.51)); +#246815 = VECTOR('',#246816,1.); +#246816 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#246817 = PLANE('',#246818); +#246818 = AXIS2_PLACEMENT_3D('',#246819,#246820,#246821); +#246819 = CARTESIAN_POINT('',(137.65,-153.770988,1.51)); +#246820 = DIRECTION('',(-0.999996589165,2.611830432711E-03,0.)); +#246821 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#246822 = ADVANCED_FACE('',(#246823),#246850,.T.); +#246823 = FACE_BOUND('',#246824,.T.); +#246824 = EDGE_LOOP('',(#246825,#246826,#246835,#246843)); +#246825 = ORIENTED_EDGE('',*,*,#246804,.T.); +#246826 = ORIENTED_EDGE('',*,*,#246827,.T.); +#246827 = EDGE_CURVE('',#246797,#246828,#246830,.T.); +#246828 = VERTEX_POINT('',#246829); +#246829 = CARTESIAN_POINT('',(137.848079,-153.035491,1.545)); +#246830 = CIRCLE('',#246831,0.100000456609); +#246831 = AXIS2_PLACEMENT_3D('',#246832,#246833,#246834); +#246832 = CARTESIAN_POINT('',(137.75,-153.055,1.545)); +#246833 = DIRECTION('',(0.,0.,-1.)); +#246834 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#246835 = ORIENTED_EDGE('',*,*,#246836,.F.); +#246836 = EDGE_CURVE('',#246837,#246828,#246839,.T.); +#246837 = VERTEX_POINT('',#246838); +#246838 = CARTESIAN_POINT('',(137.848079,-153.035491,1.51)); +#246839 = LINE('',#246840,#246841); +#246840 = CARTESIAN_POINT('',(137.848079,-153.035491,1.51)); +#246841 = VECTOR('',#246842,1.); +#246842 = DIRECTION('',(0.,0.,1.)); +#246843 = ORIENTED_EDGE('',*,*,#246844,.F.); +#246844 = EDGE_CURVE('',#246805,#246837,#246845,.T.); +#246845 = CIRCLE('',#246846,0.100000456609); +#246846 = AXIS2_PLACEMENT_3D('',#246847,#246848,#246849); +#246847 = CARTESIAN_POINT('',(137.75,-153.055,1.51)); +#246848 = DIRECTION('',(0.,0.,-1.)); +#246849 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#246850 = CYLINDRICAL_SURFACE('',#246851,0.100000456609); +#246851 = AXIS2_PLACEMENT_3D('',#246852,#246853,#246854); +#246852 = CARTESIAN_POINT('',(137.75,-153.055,1.51)); +#246853 = DIRECTION('',(0.,0.,-1.)); +#246854 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#246855 = ADVANCED_FACE('',(#246856),#246881,.T.); +#246856 = FACE_BOUND('',#246857,.T.); +#246857 = EDGE_LOOP('',(#246858,#246859,#246867,#246875)); +#246858 = ORIENTED_EDGE('',*,*,#246836,.T.); +#246859 = ORIENTED_EDGE('',*,*,#246860,.T.); +#246860 = EDGE_CURVE('',#246828,#246861,#246863,.T.); +#246861 = VERTEX_POINT('',#246862); +#246862 = CARTESIAN_POINT('',(137.848079,-153.831919,1.545)); +#246863 = LINE('',#246864,#246865); +#246864 = CARTESIAN_POINT('',(137.848079,-153.035491,1.545)); +#246865 = VECTOR('',#246866,1.); +#246866 = DIRECTION('',(0.,-1.,0.)); +#246867 = ORIENTED_EDGE('',*,*,#246868,.F.); +#246868 = EDGE_CURVE('',#246869,#246861,#246871,.T.); +#246869 = VERTEX_POINT('',#246870); +#246870 = CARTESIAN_POINT('',(137.848079,-153.831919,1.51)); +#246871 = LINE('',#246872,#246873); +#246872 = CARTESIAN_POINT('',(137.848079,-153.831919,1.51)); +#246873 = VECTOR('',#246874,1.); +#246874 = DIRECTION('',(0.,0.,1.)); +#246875 = ORIENTED_EDGE('',*,*,#246876,.F.); +#246876 = EDGE_CURVE('',#246837,#246869,#246877,.T.); +#246877 = LINE('',#246878,#246879); +#246878 = CARTESIAN_POINT('',(137.848079,-153.035491,1.51)); +#246879 = VECTOR('',#246880,1.); +#246880 = DIRECTION('',(0.,-1.,0.)); +#246881 = PLANE('',#246882); +#246882 = AXIS2_PLACEMENT_3D('',#246883,#246884,#246885); +#246883 = CARTESIAN_POINT('',(137.848079,-153.035491,1.51)); +#246884 = DIRECTION('',(1.,0.,-0.)); +#246885 = DIRECTION('',(0.,-1.,0.)); +#246886 = ADVANCED_FACE('',(#246887),#246912,.T.); +#246887 = FACE_BOUND('',#246888,.T.); +#246888 = EDGE_LOOP('',(#246889,#246890,#246898,#246906)); +#246889 = ORIENTED_EDGE('',*,*,#246868,.T.); +#246890 = ORIENTED_EDGE('',*,*,#246891,.T.); +#246891 = EDGE_CURVE('',#246861,#246892,#246894,.T.); +#246892 = VERTEX_POINT('',#246893); +#246893 = CARTESIAN_POINT('',(137.833148,-153.867967,1.545)); +#246894 = LINE('',#246895,#246896); +#246895 = CARTESIAN_POINT('',(137.848079,-153.831919,1.545)); +#246896 = VECTOR('',#246897,1.); +#246897 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246898 = ORIENTED_EDGE('',*,*,#246899,.F.); +#246899 = EDGE_CURVE('',#246900,#246892,#246902,.T.); +#246900 = VERTEX_POINT('',#246901); +#246901 = CARTESIAN_POINT('',(137.833148,-153.867967,1.51)); +#246902 = LINE('',#246903,#246904); +#246903 = CARTESIAN_POINT('',(137.833148,-153.867967,1.51)); +#246904 = VECTOR('',#246905,1.); +#246905 = DIRECTION('',(0.,0.,1.)); +#246906 = ORIENTED_EDGE('',*,*,#246907,.F.); +#246907 = EDGE_CURVE('',#246869,#246900,#246908,.T.); +#246908 = LINE('',#246909,#246910); +#246909 = CARTESIAN_POINT('',(137.848079,-153.831919,1.51)); +#246910 = VECTOR('',#246911,1.); +#246911 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246912 = PLANE('',#246913); +#246913 = AXIS2_PLACEMENT_3D('',#246914,#246915,#246916); +#246914 = CARTESIAN_POINT('',(137.848079,-153.831919,1.51)); +#246915 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#246916 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#246917 = ADVANCED_FACE('',(#246918),#246943,.T.); +#246918 = FACE_BOUND('',#246919,.T.); +#246919 = EDGE_LOOP('',(#246920,#246921,#246929,#246937)); +#246920 = ORIENTED_EDGE('',*,*,#246899,.T.); +#246921 = ORIENTED_EDGE('',*,*,#246922,.T.); +#246922 = EDGE_CURVE('',#246892,#246923,#246925,.T.); +#246923 = VERTEX_POINT('',#246924); +#246924 = CARTESIAN_POINT('',(136.117967,-155.583147,1.545)); +#246925 = LINE('',#246926,#246927); +#246926 = CARTESIAN_POINT('',(137.833148,-153.867967,1.545)); +#246927 = VECTOR('',#246928,1.); +#246928 = DIRECTION('',(-0.707106987318,-0.707106575055,0.)); +#246929 = ORIENTED_EDGE('',*,*,#246930,.F.); +#246930 = EDGE_CURVE('',#246931,#246923,#246933,.T.); +#246931 = VERTEX_POINT('',#246932); +#246932 = CARTESIAN_POINT('',(136.117967,-155.583147,1.51)); +#246933 = LINE('',#246934,#246935); +#246934 = CARTESIAN_POINT('',(136.117967,-155.583147,1.51)); +#246935 = VECTOR('',#246936,1.); +#246936 = DIRECTION('',(0.,0.,1.)); +#246937 = ORIENTED_EDGE('',*,*,#246938,.F.); +#246938 = EDGE_CURVE('',#246900,#246931,#246939,.T.); +#246939 = LINE('',#246940,#246941); +#246940 = CARTESIAN_POINT('',(137.833148,-153.867967,1.51)); +#246941 = VECTOR('',#246942,1.); +#246942 = DIRECTION('',(-0.707106987318,-0.707106575055,0.)); +#246943 = PLANE('',#246944); +#246944 = AXIS2_PLACEMENT_3D('',#246945,#246946,#246947); +#246945 = CARTESIAN_POINT('',(137.833148,-153.867967,1.51)); +#246946 = DIRECTION('',(0.707106575055,-0.707106987318,0.)); +#246947 = DIRECTION('',(-0.707106987318,-0.707106575055,0.)); +#246948 = ADVANCED_FACE('',(#246949),#246974,.T.); +#246949 = FACE_BOUND('',#246950,.T.); +#246950 = EDGE_LOOP('',(#246951,#246952,#246960,#246968)); +#246951 = ORIENTED_EDGE('',*,*,#246930,.T.); +#246952 = ORIENTED_EDGE('',*,*,#246953,.T.); +#246953 = EDGE_CURVE('',#246923,#246954,#246956,.T.); +#246954 = VERTEX_POINT('',#246955); +#246955 = CARTESIAN_POINT('',(136.081919,-155.598079,1.545)); +#246956 = LINE('',#246957,#246958); +#246957 = CARTESIAN_POINT('',(136.117967,-155.583147,1.545)); +#246958 = VECTOR('',#246959,1.); +#246959 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#246960 = ORIENTED_EDGE('',*,*,#246961,.F.); +#246961 = EDGE_CURVE('',#246962,#246954,#246964,.T.); +#246962 = VERTEX_POINT('',#246963); +#246963 = CARTESIAN_POINT('',(136.081919,-155.598079,1.51)); +#246964 = LINE('',#246965,#246966); +#246965 = CARTESIAN_POINT('',(136.081919,-155.598079,1.51)); +#246966 = VECTOR('',#246967,1.); +#246967 = DIRECTION('',(0.,0.,1.)); +#246968 = ORIENTED_EDGE('',*,*,#246969,.F.); +#246969 = EDGE_CURVE('',#246931,#246962,#246970,.T.); +#246970 = LINE('',#246971,#246972); +#246971 = CARTESIAN_POINT('',(136.117967,-155.583147,1.51)); +#246972 = VECTOR('',#246973,1.); +#246973 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#246974 = PLANE('',#246975); +#246975 = AXIS2_PLACEMENT_3D('',#246976,#246977,#246978); +#246976 = CARTESIAN_POINT('',(136.117967,-155.583147,1.51)); +#246977 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#246978 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#246979 = ADVANCED_FACE('',(#246980),#247005,.T.); +#246980 = FACE_BOUND('',#246981,.T.); +#246981 = EDGE_LOOP('',(#246982,#246983,#246991,#246999)); +#246982 = ORIENTED_EDGE('',*,*,#246961,.T.); +#246983 = ORIENTED_EDGE('',*,*,#246984,.T.); +#246984 = EDGE_CURVE('',#246954,#246985,#246987,.T.); +#246985 = VERTEX_POINT('',#246986); +#246986 = CARTESIAN_POINT('',(133.980491,-155.598079,1.545)); +#246987 = LINE('',#246988,#246989); +#246988 = CARTESIAN_POINT('',(136.081919,-155.598079,1.545)); +#246989 = VECTOR('',#246990,1.); +#246990 = DIRECTION('',(-1.,0.,0.)); +#246991 = ORIENTED_EDGE('',*,*,#246992,.F.); +#246992 = EDGE_CURVE('',#246993,#246985,#246995,.T.); +#246993 = VERTEX_POINT('',#246994); +#246994 = CARTESIAN_POINT('',(133.980491,-155.598079,1.51)); +#246995 = LINE('',#246996,#246997); +#246996 = CARTESIAN_POINT('',(133.980491,-155.598079,1.51)); +#246997 = VECTOR('',#246998,1.); +#246998 = DIRECTION('',(0.,0.,1.)); +#246999 = ORIENTED_EDGE('',*,*,#247000,.F.); +#247000 = EDGE_CURVE('',#246962,#246993,#247001,.T.); +#247001 = LINE('',#247002,#247003); +#247002 = CARTESIAN_POINT('',(136.081919,-155.598079,1.51)); +#247003 = VECTOR('',#247004,1.); +#247004 = DIRECTION('',(-1.,0.,0.)); +#247005 = PLANE('',#247006); +#247006 = AXIS2_PLACEMENT_3D('',#247007,#247008,#247009); +#247007 = CARTESIAN_POINT('',(136.081919,-155.598079,1.51)); +#247008 = DIRECTION('',(0.,-1.,0.)); +#247009 = DIRECTION('',(-1.,0.,0.)); +#247010 = ADVANCED_FACE('',(#247011),#247036,.T.); +#247011 = FACE_BOUND('',#247012,.T.); +#247012 = EDGE_LOOP('',(#247013,#247014,#247022,#247030)); +#247013 = ORIENTED_EDGE('',*,*,#246992,.T.); +#247014 = ORIENTED_EDGE('',*,*,#247015,.T.); +#247015 = EDGE_CURVE('',#246985,#247016,#247018,.T.); +#247016 = VERTEX_POINT('',#247017); +#247017 = CARTESIAN_POINT('',(133.944442,-155.583147,1.545)); +#247018 = LINE('',#247019,#247020); +#247019 = CARTESIAN_POINT('',(133.980491,-155.598079,1.545)); +#247020 = VECTOR('',#247021,1.); +#247021 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247022 = ORIENTED_EDGE('',*,*,#247023,.F.); +#247023 = EDGE_CURVE('',#247024,#247016,#247026,.T.); +#247024 = VERTEX_POINT('',#247025); +#247025 = CARTESIAN_POINT('',(133.944442,-155.583147,1.51)); +#247026 = LINE('',#247027,#247028); +#247027 = CARTESIAN_POINT('',(133.944442,-155.583147,1.51)); +#247028 = VECTOR('',#247029,1.); +#247029 = DIRECTION('',(0.,0.,1.)); +#247030 = ORIENTED_EDGE('',*,*,#247031,.F.); +#247031 = EDGE_CURVE('',#246993,#247024,#247032,.T.); +#247032 = LINE('',#247033,#247034); +#247033 = CARTESIAN_POINT('',(133.980491,-155.598079,1.51)); +#247034 = VECTOR('',#247035,1.); +#247035 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247036 = PLANE('',#247037); +#247037 = AXIS2_PLACEMENT_3D('',#247038,#247039,#247040); +#247038 = CARTESIAN_POINT('',(133.980491,-155.598079,1.51)); +#247039 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#247040 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247041 = ADVANCED_FACE('',(#247042),#247067,.T.); +#247042 = FACE_BOUND('',#247043,.T.); +#247043 = EDGE_LOOP('',(#247044,#247045,#247053,#247061)); +#247044 = ORIENTED_EDGE('',*,*,#247023,.T.); +#247045 = ORIENTED_EDGE('',*,*,#247046,.T.); +#247046 = EDGE_CURVE('',#247016,#247047,#247049,.T.); +#247047 = VERTEX_POINT('',#247048); +#247048 = CARTESIAN_POINT('',(133.665685,-155.307107,1.545)); +#247049 = LINE('',#247050,#247051); +#247050 = CARTESIAN_POINT('',(133.944442,-155.583147,1.545)); +#247051 = VECTOR('',#247052,1.); +#247052 = DIRECTION('',(-0.710561165069,0.703635438772,0.)); +#247053 = ORIENTED_EDGE('',*,*,#247054,.F.); +#247054 = EDGE_CURVE('',#247055,#247047,#247057,.T.); +#247055 = VERTEX_POINT('',#247056); +#247056 = CARTESIAN_POINT('',(133.665685,-155.307107,1.51)); +#247057 = LINE('',#247058,#247059); +#247058 = CARTESIAN_POINT('',(133.665685,-155.307107,1.51)); +#247059 = VECTOR('',#247060,1.); +#247060 = DIRECTION('',(0.,0.,1.)); +#247061 = ORIENTED_EDGE('',*,*,#247062,.F.); +#247062 = EDGE_CURVE('',#247024,#247055,#247063,.T.); +#247063 = LINE('',#247064,#247065); +#247064 = CARTESIAN_POINT('',(133.944442,-155.583147,1.51)); +#247065 = VECTOR('',#247066,1.); +#247066 = DIRECTION('',(-0.710561165069,0.703635438772,0.)); +#247067 = PLANE('',#247068); +#247068 = AXIS2_PLACEMENT_3D('',#247069,#247070,#247071); +#247069 = CARTESIAN_POINT('',(133.944442,-155.583147,1.51)); +#247070 = DIRECTION('',(-0.703635438772,-0.710561165069,0.)); +#247071 = DIRECTION('',(-0.710561165069,0.703635438772,0.)); +#247072 = ADVANCED_FACE('',(#247073),#247098,.T.); +#247073 = FACE_BOUND('',#247074,.T.); +#247074 = EDGE_LOOP('',(#247075,#247076,#247084,#247092)); +#247075 = ORIENTED_EDGE('',*,*,#247054,.T.); +#247076 = ORIENTED_EDGE('',*,*,#247077,.T.); +#247077 = EDGE_CURVE('',#247047,#247078,#247080,.T.); +#247078 = VERTEX_POINT('',#247079); +#247079 = CARTESIAN_POINT('',(133.566928,-155.403147,1.545)); +#247080 = LINE('',#247081,#247082); +#247081 = CARTESIAN_POINT('',(133.665685,-155.307107,1.545)); +#247082 = VECTOR('',#247083,1.); +#247083 = DIRECTION('',(-0.716899672536,-0.697176347503,0.)); +#247084 = ORIENTED_EDGE('',*,*,#247085,.F.); +#247085 = EDGE_CURVE('',#247086,#247078,#247088,.T.); +#247086 = VERTEX_POINT('',#247087); +#247087 = CARTESIAN_POINT('',(133.566928,-155.403147,1.51)); +#247088 = LINE('',#247089,#247090); +#247089 = CARTESIAN_POINT('',(133.566928,-155.403147,1.51)); +#247090 = VECTOR('',#247091,1.); +#247091 = DIRECTION('',(0.,0.,1.)); +#247092 = ORIENTED_EDGE('',*,*,#247093,.F.); +#247093 = EDGE_CURVE('',#247055,#247086,#247094,.T.); +#247094 = LINE('',#247095,#247096); +#247095 = CARTESIAN_POINT('',(133.665685,-155.307107,1.51)); +#247096 = VECTOR('',#247097,1.); +#247097 = DIRECTION('',(-0.716899672536,-0.697176347503,0.)); +#247098 = PLANE('',#247099); +#247099 = AXIS2_PLACEMENT_3D('',#247100,#247101,#247102); +#247100 = CARTESIAN_POINT('',(133.665685,-155.307107,1.51)); +#247101 = DIRECTION('',(0.697176347503,-0.716899672536,0.)); +#247102 = DIRECTION('',(-0.716899672536,-0.697176347503,0.)); +#247103 = ADVANCED_FACE('',(#247104),#247129,.T.); +#247104 = FACE_BOUND('',#247105,.T.); +#247105 = EDGE_LOOP('',(#247106,#247107,#247115,#247123)); +#247106 = ORIENTED_EDGE('',*,*,#247085,.T.); +#247107 = ORIENTED_EDGE('',*,*,#247108,.T.); +#247108 = EDGE_CURVE('',#247078,#247109,#247111,.T.); +#247109 = VERTEX_POINT('',#247110); +#247110 = CARTESIAN_POINT('',(133.53088,-155.418079,1.545)); +#247111 = LINE('',#247112,#247113); +#247112 = CARTESIAN_POINT('',(133.566928,-155.403147,1.545)); +#247113 = VECTOR('',#247114,1.); +#247114 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#247115 = ORIENTED_EDGE('',*,*,#247116,.F.); +#247116 = EDGE_CURVE('',#247117,#247109,#247119,.T.); +#247117 = VERTEX_POINT('',#247118); +#247118 = CARTESIAN_POINT('',(133.53088,-155.418079,1.51)); +#247119 = LINE('',#247120,#247121); +#247120 = CARTESIAN_POINT('',(133.53088,-155.418079,1.51)); +#247121 = VECTOR('',#247122,1.); +#247122 = DIRECTION('',(0.,0.,1.)); +#247123 = ORIENTED_EDGE('',*,*,#247124,.F.); +#247124 = EDGE_CURVE('',#247086,#247117,#247125,.T.); +#247125 = LINE('',#247126,#247127); +#247126 = CARTESIAN_POINT('',(133.566928,-155.403147,1.51)); +#247127 = VECTOR('',#247128,1.); +#247128 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#247129 = PLANE('',#247130); +#247130 = AXIS2_PLACEMENT_3D('',#247131,#247132,#247133); +#247131 = CARTESIAN_POINT('',(133.566928,-155.403147,1.51)); +#247132 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#247133 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#247134 = ADVANCED_FACE('',(#247135),#247160,.T.); +#247135 = FACE_BOUND('',#247136,.T.); +#247136 = EDGE_LOOP('',(#247137,#247138,#247146,#247154)); +#247137 = ORIENTED_EDGE('',*,*,#247116,.T.); +#247138 = ORIENTED_EDGE('',*,*,#247139,.T.); +#247139 = EDGE_CURVE('',#247109,#247140,#247142,.T.); +#247140 = VERTEX_POINT('',#247141); +#247141 = CARTESIAN_POINT('',(132.82912,-155.418079,1.545)); +#247142 = LINE('',#247143,#247144); +#247143 = CARTESIAN_POINT('',(133.53088,-155.418079,1.545)); +#247144 = VECTOR('',#247145,1.); +#247145 = DIRECTION('',(-1.,0.,0.)); +#247146 = ORIENTED_EDGE('',*,*,#247147,.F.); +#247147 = EDGE_CURVE('',#247148,#247140,#247150,.T.); +#247148 = VERTEX_POINT('',#247149); +#247149 = CARTESIAN_POINT('',(132.82912,-155.418079,1.51)); +#247150 = LINE('',#247151,#247152); +#247151 = CARTESIAN_POINT('',(132.82912,-155.418079,1.51)); +#247152 = VECTOR('',#247153,1.); +#247153 = DIRECTION('',(0.,0.,1.)); +#247154 = ORIENTED_EDGE('',*,*,#247155,.F.); +#247155 = EDGE_CURVE('',#247117,#247148,#247156,.T.); +#247156 = LINE('',#247157,#247158); +#247157 = CARTESIAN_POINT('',(133.53088,-155.418079,1.51)); +#247158 = VECTOR('',#247159,1.); +#247159 = DIRECTION('',(-1.,0.,0.)); +#247160 = PLANE('',#247161); +#247161 = AXIS2_PLACEMENT_3D('',#247162,#247163,#247164); +#247162 = CARTESIAN_POINT('',(133.53088,-155.418079,1.51)); +#247163 = DIRECTION('',(0.,-1.,0.)); +#247164 = DIRECTION('',(-1.,0.,0.)); +#247165 = ADVANCED_FACE('',(#247166),#247191,.T.); +#247166 = FACE_BOUND('',#247167,.T.); +#247167 = EDGE_LOOP('',(#247168,#247169,#247177,#247185)); +#247168 = ORIENTED_EDGE('',*,*,#247147,.T.); +#247169 = ORIENTED_EDGE('',*,*,#247170,.T.); +#247170 = EDGE_CURVE('',#247140,#247171,#247173,.T.); +#247171 = VERTEX_POINT('',#247172); +#247172 = CARTESIAN_POINT('',(132.793071,-155.403147,1.545)); +#247173 = LINE('',#247174,#247175); +#247174 = CARTESIAN_POINT('',(132.82912,-155.418079,1.545)); +#247175 = VECTOR('',#247176,1.); +#247176 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247177 = ORIENTED_EDGE('',*,*,#247178,.F.); +#247178 = EDGE_CURVE('',#247179,#247171,#247181,.T.); +#247179 = VERTEX_POINT('',#247180); +#247180 = CARTESIAN_POINT('',(132.793071,-155.403147,1.51)); +#247181 = LINE('',#247182,#247183); +#247182 = CARTESIAN_POINT('',(132.793071,-155.403147,1.51)); +#247183 = VECTOR('',#247184,1.); +#247184 = DIRECTION('',(0.,0.,1.)); +#247185 = ORIENTED_EDGE('',*,*,#247186,.F.); +#247186 = EDGE_CURVE('',#247148,#247179,#247187,.T.); +#247187 = LINE('',#247188,#247189); +#247188 = CARTESIAN_POINT('',(132.82912,-155.418079,1.51)); +#247189 = VECTOR('',#247190,1.); +#247190 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247191 = PLANE('',#247192); +#247192 = AXIS2_PLACEMENT_3D('',#247193,#247194,#247195); +#247193 = CARTESIAN_POINT('',(132.82912,-155.418079,1.51)); +#247194 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#247195 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#247196 = ADVANCED_FACE('',(#247197),#247222,.T.); +#247197 = FACE_BOUND('',#247198,.T.); +#247198 = EDGE_LOOP('',(#247199,#247200,#247208,#247216)); +#247199 = ORIENTED_EDGE('',*,*,#247178,.T.); +#247200 = ORIENTED_EDGE('',*,*,#247201,.T.); +#247201 = EDGE_CURVE('',#247171,#247202,#247204,.T.); +#247202 = VERTEX_POINT('',#247203); +#247203 = CARTESIAN_POINT('',(132.487207,-155.1,1.545)); +#247204 = LINE('',#247205,#247206); +#247205 = CARTESIAN_POINT('',(132.793071,-155.403147,1.545)); +#247206 = VECTOR('',#247207,1.); +#247207 = DIRECTION('',(-0.710254350761,0.703945137937,0.)); +#247208 = ORIENTED_EDGE('',*,*,#247209,.F.); +#247209 = EDGE_CURVE('',#247210,#247202,#247212,.T.); +#247210 = VERTEX_POINT('',#247211); +#247211 = CARTESIAN_POINT('',(132.487207,-155.1,1.51)); +#247212 = LINE('',#247213,#247214); +#247213 = CARTESIAN_POINT('',(132.487207,-155.1,1.51)); +#247214 = VECTOR('',#247215,1.); +#247215 = DIRECTION('',(0.,0.,1.)); +#247216 = ORIENTED_EDGE('',*,*,#247217,.F.); +#247217 = EDGE_CURVE('',#247179,#247210,#247218,.T.); +#247218 = LINE('',#247219,#247220); +#247219 = CARTESIAN_POINT('',(132.793071,-155.403147,1.51)); +#247220 = VECTOR('',#247221,1.); +#247221 = DIRECTION('',(-0.710254350761,0.703945137937,0.)); +#247222 = PLANE('',#247223); +#247223 = AXIS2_PLACEMENT_3D('',#247224,#247225,#247226); +#247224 = CARTESIAN_POINT('',(132.793071,-155.403147,1.51)); +#247225 = DIRECTION('',(-0.703945137937,-0.710254350761,0.)); +#247226 = DIRECTION('',(-0.710254350761,0.703945137937,0.)); +#247227 = ADVANCED_FACE('',(#247228),#247253,.T.); +#247228 = FACE_BOUND('',#247229,.T.); +#247229 = EDGE_LOOP('',(#247230,#247231,#247239,#247247)); +#247230 = ORIENTED_EDGE('',*,*,#247209,.T.); +#247231 = ORIENTED_EDGE('',*,*,#247232,.T.); +#247232 = EDGE_CURVE('',#247202,#247233,#247235,.T.); +#247233 = VERTEX_POINT('',#247234); +#247234 = CARTESIAN_POINT('',(128.460491,-155.098079,1.545)); +#247235 = LINE('',#247236,#247237); +#247236 = CARTESIAN_POINT('',(132.487207,-155.1,1.545)); +#247237 = VECTOR('',#247238,1.); +#247238 = DIRECTION('',(-0.999999886205,4.770636373118E-04,0.)); +#247239 = ORIENTED_EDGE('',*,*,#247240,.F.); +#247240 = EDGE_CURVE('',#247241,#247233,#247243,.T.); +#247241 = VERTEX_POINT('',#247242); +#247242 = CARTESIAN_POINT('',(128.460491,-155.098079,1.51)); +#247243 = LINE('',#247244,#247245); +#247244 = CARTESIAN_POINT('',(128.460491,-155.098079,1.51)); +#247245 = VECTOR('',#247246,1.); +#247246 = DIRECTION('',(0.,0.,1.)); +#247247 = ORIENTED_EDGE('',*,*,#247248,.F.); +#247248 = EDGE_CURVE('',#247210,#247241,#247249,.T.); +#247249 = LINE('',#247250,#247251); +#247250 = CARTESIAN_POINT('',(132.487207,-155.1,1.51)); +#247251 = VECTOR('',#247252,1.); +#247252 = DIRECTION('',(-0.999999886205,4.770636373118E-04,0.)); +#247253 = PLANE('',#247254); +#247254 = AXIS2_PLACEMENT_3D('',#247255,#247256,#247257); +#247255 = CARTESIAN_POINT('',(132.487207,-155.1,1.51)); +#247256 = DIRECTION('',(-4.770636373118E-04,-0.999999886205,0.)); +#247257 = DIRECTION('',(-0.999999886205,4.770636373118E-04,0.)); +#247258 = ADVANCED_FACE('',(#247259),#247284,.T.); +#247259 = FACE_BOUND('',#247260,.T.); +#247260 = EDGE_LOOP('',(#247261,#247262,#247270,#247278)); +#247261 = ORIENTED_EDGE('',*,*,#247240,.T.); +#247262 = ORIENTED_EDGE('',*,*,#247263,.T.); +#247263 = EDGE_CURVE('',#247233,#247264,#247266,.T.); +#247264 = VERTEX_POINT('',#247265); +#247265 = CARTESIAN_POINT('',(128.424443,-155.083147,1.545)); +#247266 = LINE('',#247267,#247268); +#247267 = CARTESIAN_POINT('',(128.460491,-155.098079,1.545)); +#247268 = VECTOR('',#247269,1.); +#247269 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#247270 = ORIENTED_EDGE('',*,*,#247271,.F.); +#247271 = EDGE_CURVE('',#247272,#247264,#247274,.T.); +#247272 = VERTEX_POINT('',#247273); +#247273 = CARTESIAN_POINT('',(128.424443,-155.083147,1.51)); +#247274 = LINE('',#247275,#247276); +#247275 = CARTESIAN_POINT('',(128.424443,-155.083147,1.51)); +#247276 = VECTOR('',#247277,1.); +#247277 = DIRECTION('',(0.,0.,1.)); +#247278 = ORIENTED_EDGE('',*,*,#247279,.F.); +#247279 = EDGE_CURVE('',#247241,#247272,#247280,.T.); +#247280 = LINE('',#247281,#247282); +#247281 = CARTESIAN_POINT('',(128.460491,-155.098079,1.51)); +#247282 = VECTOR('',#247283,1.); +#247283 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#247284 = PLANE('',#247285); +#247285 = AXIS2_PLACEMENT_3D('',#247286,#247287,#247288); +#247286 = CARTESIAN_POINT('',(128.460491,-155.098079,1.51)); +#247287 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#247288 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#247289 = ADVANCED_FACE('',(#247290),#247315,.T.); +#247290 = FACE_BOUND('',#247291,.T.); +#247291 = EDGE_LOOP('',(#247292,#247293,#247301,#247309)); +#247292 = ORIENTED_EDGE('',*,*,#247271,.T.); +#247293 = ORIENTED_EDGE('',*,*,#247294,.T.); +#247294 = EDGE_CURVE('',#247264,#247295,#247297,.T.); +#247295 = VERTEX_POINT('',#247296); +#247296 = CARTESIAN_POINT('',(127.666853,-154.325557,1.545)); +#247297 = LINE('',#247298,#247299); +#247298 = CARTESIAN_POINT('',(128.424443,-155.083147,1.545)); +#247299 = VECTOR('',#247300,1.); +#247300 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#247301 = ORIENTED_EDGE('',*,*,#247302,.F.); +#247302 = EDGE_CURVE('',#247303,#247295,#247305,.T.); +#247303 = VERTEX_POINT('',#247304); +#247304 = CARTESIAN_POINT('',(127.666853,-154.325557,1.51)); +#247305 = LINE('',#247306,#247307); +#247306 = CARTESIAN_POINT('',(127.666853,-154.325557,1.51)); +#247307 = VECTOR('',#247308,1.); +#247308 = DIRECTION('',(0.,0.,1.)); +#247309 = ORIENTED_EDGE('',*,*,#247310,.F.); +#247310 = EDGE_CURVE('',#247272,#247303,#247311,.T.); +#247311 = LINE('',#247312,#247313); +#247312 = CARTESIAN_POINT('',(128.424443,-155.083147,1.51)); +#247313 = VECTOR('',#247314,1.); +#247314 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#247315 = PLANE('',#247316); +#247316 = AXIS2_PLACEMENT_3D('',#247317,#247318,#247319); +#247317 = CARTESIAN_POINT('',(128.424443,-155.083147,1.51)); +#247318 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#247319 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#247320 = ADVANCED_FACE('',(#247321),#247348,.T.); +#247321 = FACE_BOUND('',#247322,.T.); +#247322 = EDGE_LOOP('',(#247323,#247324,#247333,#247341)); +#247323 = ORIENTED_EDGE('',*,*,#247302,.T.); +#247324 = ORIENTED_EDGE('',*,*,#247325,.T.); +#247325 = EDGE_CURVE('',#247295,#247326,#247328,.T.); +#247326 = VERTEX_POINT('',#247327); +#247327 = CARTESIAN_POINT('',(127.805557,-154.186853,1.545)); +#247328 = CIRCLE('',#247329,0.10000001929); +#247329 = AXIS2_PLACEMENT_3D('',#247330,#247331,#247332); +#247330 = CARTESIAN_POINT('',(127.75,-154.27,1.545)); +#247331 = DIRECTION('',(0.,0.,-1.)); +#247332 = DIRECTION('',(-0.831469839609,-0.555569892831,-0.)); +#247333 = ORIENTED_EDGE('',*,*,#247334,.F.); +#247334 = EDGE_CURVE('',#247335,#247326,#247337,.T.); +#247335 = VERTEX_POINT('',#247336); +#247336 = CARTESIAN_POINT('',(127.805557,-154.186853,1.51)); +#247337 = LINE('',#247338,#247339); +#247338 = CARTESIAN_POINT('',(127.805557,-154.186853,1.51)); +#247339 = VECTOR('',#247340,1.); +#247340 = DIRECTION('',(0.,0.,1.)); +#247341 = ORIENTED_EDGE('',*,*,#247342,.F.); +#247342 = EDGE_CURVE('',#247303,#247335,#247343,.T.); +#247343 = CIRCLE('',#247344,0.10000001929); +#247344 = AXIS2_PLACEMENT_3D('',#247345,#247346,#247347); +#247345 = CARTESIAN_POINT('',(127.75,-154.27,1.51)); +#247346 = DIRECTION('',(0.,0.,-1.)); +#247347 = DIRECTION('',(-0.831469839609,-0.555569892831,-0.)); +#247348 = CYLINDRICAL_SURFACE('',#247349,0.10000001929); +#247349 = AXIS2_PLACEMENT_3D('',#247350,#247351,#247352); +#247350 = CARTESIAN_POINT('',(127.75,-154.27,1.51)); +#247351 = DIRECTION('',(0.,0.,-1.)); +#247352 = DIRECTION('',(-0.831469839609,-0.555569892831,-0.)); +#247353 = ADVANCED_FACE('',(#247354),#247379,.T.); +#247354 = FACE_BOUND('',#247355,.T.); +#247355 = EDGE_LOOP('',(#247356,#247357,#247365,#247373)); +#247356 = ORIENTED_EDGE('',*,*,#247334,.T.); +#247357 = ORIENTED_EDGE('',*,*,#247358,.T.); +#247358 = EDGE_CURVE('',#247326,#247359,#247361,.T.); +#247359 = VERTEX_POINT('',#247360); +#247360 = CARTESIAN_POINT('',(128.521422,-154.9,1.545)); +#247361 = LINE('',#247362,#247363); +#247362 = CARTESIAN_POINT('',(127.805557,-154.186853,1.545)); +#247363 = VECTOR('',#247364,1.); +#247364 = DIRECTION('',(0.70845042631,-0.705760578002,0.)); +#247365 = ORIENTED_EDGE('',*,*,#247366,.F.); +#247366 = EDGE_CURVE('',#247367,#247359,#247369,.T.); +#247367 = VERTEX_POINT('',#247368); +#247368 = CARTESIAN_POINT('',(128.521422,-154.9,1.51)); +#247369 = LINE('',#247370,#247371); +#247370 = CARTESIAN_POINT('',(128.521422,-154.9,1.51)); +#247371 = VECTOR('',#247372,1.); +#247372 = DIRECTION('',(0.,0.,1.)); +#247373 = ORIENTED_EDGE('',*,*,#247374,.F.); +#247374 = EDGE_CURVE('',#247335,#247367,#247375,.T.); +#247375 = LINE('',#247376,#247377); +#247376 = CARTESIAN_POINT('',(127.805557,-154.186853,1.51)); +#247377 = VECTOR('',#247378,1.); +#247378 = DIRECTION('',(0.70845042631,-0.705760578002,0.)); +#247379 = PLANE('',#247380); +#247380 = AXIS2_PLACEMENT_3D('',#247381,#247382,#247383); +#247381 = CARTESIAN_POINT('',(127.805557,-154.186853,1.51)); +#247382 = DIRECTION('',(0.705760578002,0.70845042631,-0.)); +#247383 = DIRECTION('',(0.70845042631,-0.705760578002,0.)); +#247384 = ADVANCED_FACE('',(#247385),#247410,.T.); +#247385 = FACE_BOUND('',#247386,.T.); +#247386 = EDGE_LOOP('',(#247387,#247388,#247396,#247404)); +#247387 = ORIENTED_EDGE('',*,*,#247366,.T.); +#247388 = ORIENTED_EDGE('',*,*,#247389,.T.); +#247389 = EDGE_CURVE('',#247359,#247390,#247392,.T.); +#247390 = VERTEX_POINT('',#247391); +#247391 = CARTESIAN_POINT('',(132.548138,-154.901921,1.545)); +#247392 = LINE('',#247393,#247394); +#247393 = CARTESIAN_POINT('',(128.521422,-154.9,1.545)); +#247394 = VECTOR('',#247395,1.); +#247395 = DIRECTION('',(0.999999886205,-4.770636373118E-04,0.)); +#247396 = ORIENTED_EDGE('',*,*,#247397,.F.); +#247397 = EDGE_CURVE('',#247398,#247390,#247400,.T.); +#247398 = VERTEX_POINT('',#247399); +#247399 = CARTESIAN_POINT('',(132.548138,-154.901921,1.51)); +#247400 = LINE('',#247401,#247402); +#247401 = CARTESIAN_POINT('',(132.548138,-154.901921,1.51)); +#247402 = VECTOR('',#247403,1.); +#247403 = DIRECTION('',(0.,0.,1.)); +#247404 = ORIENTED_EDGE('',*,*,#247405,.F.); +#247405 = EDGE_CURVE('',#247367,#247398,#247406,.T.); +#247406 = LINE('',#247407,#247408); +#247407 = CARTESIAN_POINT('',(128.521422,-154.9,1.51)); +#247408 = VECTOR('',#247409,1.); +#247409 = DIRECTION('',(0.999999886205,-4.770636373118E-04,0.)); +#247410 = PLANE('',#247411); +#247411 = AXIS2_PLACEMENT_3D('',#247412,#247413,#247414); +#247412 = CARTESIAN_POINT('',(128.521422,-154.9,1.51)); +#247413 = DIRECTION('',(4.770636373118E-04,0.999999886205,-0.)); +#247414 = DIRECTION('',(0.999999886205,-4.770636373118E-04,0.)); +#247415 = ADVANCED_FACE('',(#247416),#247441,.T.); +#247416 = FACE_BOUND('',#247417,.T.); +#247417 = EDGE_LOOP('',(#247418,#247419,#247427,#247435)); +#247418 = ORIENTED_EDGE('',*,*,#247397,.T.); +#247419 = ORIENTED_EDGE('',*,*,#247420,.T.); +#247420 = EDGE_CURVE('',#247390,#247421,#247423,.T.); +#247421 = VERTEX_POINT('',#247422); +#247422 = CARTESIAN_POINT('',(132.584186,-154.916853,1.545)); +#247423 = LINE('',#247424,#247425); +#247424 = CARTESIAN_POINT('',(132.548138,-154.901921,1.545)); +#247425 = VECTOR('',#247426,1.); +#247426 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#247427 = ORIENTED_EDGE('',*,*,#247428,.F.); +#247428 = EDGE_CURVE('',#247429,#247421,#247431,.T.); +#247429 = VERTEX_POINT('',#247430); +#247430 = CARTESIAN_POINT('',(132.584186,-154.916853,1.51)); +#247431 = LINE('',#247432,#247433); +#247432 = CARTESIAN_POINT('',(132.584186,-154.916853,1.51)); +#247433 = VECTOR('',#247434,1.); +#247434 = DIRECTION('',(0.,0.,1.)); +#247435 = ORIENTED_EDGE('',*,*,#247436,.F.); +#247436 = EDGE_CURVE('',#247398,#247429,#247437,.T.); +#247437 = LINE('',#247438,#247439); +#247438 = CARTESIAN_POINT('',(132.548138,-154.901921,1.51)); +#247439 = VECTOR('',#247440,1.); +#247440 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#247441 = PLANE('',#247442); +#247442 = AXIS2_PLACEMENT_3D('',#247443,#247444,#247445); +#247443 = CARTESIAN_POINT('',(132.548138,-154.901921,1.51)); +#247444 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#247445 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#247446 = ADVANCED_FACE('',(#247447),#247472,.T.); +#247447 = FACE_BOUND('',#247448,.T.); +#247448 = EDGE_LOOP('',(#247449,#247450,#247458,#247466)); +#247449 = ORIENTED_EDGE('',*,*,#247428,.T.); +#247450 = ORIENTED_EDGE('',*,*,#247451,.T.); +#247451 = EDGE_CURVE('',#247421,#247452,#247454,.T.); +#247452 = VERTEX_POINT('',#247453); +#247453 = CARTESIAN_POINT('',(132.89005,-155.22,1.545)); +#247454 = LINE('',#247455,#247456); +#247455 = CARTESIAN_POINT('',(132.584186,-154.916853,1.545)); +#247456 = VECTOR('',#247457,1.); +#247457 = DIRECTION('',(0.710254350761,-0.703945137937,0.)); +#247458 = ORIENTED_EDGE('',*,*,#247459,.F.); +#247459 = EDGE_CURVE('',#247460,#247452,#247462,.T.); +#247460 = VERTEX_POINT('',#247461); +#247461 = CARTESIAN_POINT('',(132.89005,-155.22,1.51)); +#247462 = LINE('',#247463,#247464); +#247463 = CARTESIAN_POINT('',(132.89005,-155.22,1.51)); +#247464 = VECTOR('',#247465,1.); +#247465 = DIRECTION('',(0.,0.,1.)); +#247466 = ORIENTED_EDGE('',*,*,#247467,.F.); +#247467 = EDGE_CURVE('',#247429,#247460,#247468,.T.); +#247468 = LINE('',#247469,#247470); +#247469 = CARTESIAN_POINT('',(132.584186,-154.916853,1.51)); +#247470 = VECTOR('',#247471,1.); +#247471 = DIRECTION('',(0.710254350761,-0.703945137937,0.)); +#247472 = PLANE('',#247473); +#247473 = AXIS2_PLACEMENT_3D('',#247474,#247475,#247476); +#247474 = CARTESIAN_POINT('',(132.584186,-154.916853,1.51)); +#247475 = DIRECTION('',(0.703945137937,0.710254350761,-0.)); +#247476 = DIRECTION('',(0.710254350761,-0.703945137937,0.)); +#247477 = ADVANCED_FACE('',(#247478),#247503,.T.); +#247478 = FACE_BOUND('',#247479,.T.); +#247479 = EDGE_LOOP('',(#247480,#247481,#247489,#247497)); +#247480 = ORIENTED_EDGE('',*,*,#247459,.T.); +#247481 = ORIENTED_EDGE('',*,*,#247482,.T.); +#247482 = EDGE_CURVE('',#247452,#247483,#247485,.T.); +#247483 = VERTEX_POINT('',#247484); +#247484 = CARTESIAN_POINT('',(133.46995,-155.22,1.545)); +#247485 = LINE('',#247486,#247487); +#247486 = CARTESIAN_POINT('',(132.89005,-155.22,1.545)); +#247487 = VECTOR('',#247488,1.); +#247488 = DIRECTION('',(1.,0.,0.)); +#247489 = ORIENTED_EDGE('',*,*,#247490,.F.); +#247490 = EDGE_CURVE('',#247491,#247483,#247493,.T.); +#247491 = VERTEX_POINT('',#247492); +#247492 = CARTESIAN_POINT('',(133.46995,-155.22,1.51)); +#247493 = LINE('',#247494,#247495); +#247494 = CARTESIAN_POINT('',(133.46995,-155.22,1.51)); +#247495 = VECTOR('',#247496,1.); +#247496 = DIRECTION('',(0.,0.,1.)); +#247497 = ORIENTED_EDGE('',*,*,#247498,.F.); +#247498 = EDGE_CURVE('',#247460,#247491,#247499,.T.); +#247499 = LINE('',#247500,#247501); +#247500 = CARTESIAN_POINT('',(132.89005,-155.22,1.51)); +#247501 = VECTOR('',#247502,1.); +#247502 = DIRECTION('',(1.,0.,0.)); +#247503 = PLANE('',#247504); +#247504 = AXIS2_PLACEMENT_3D('',#247505,#247506,#247507); +#247505 = CARTESIAN_POINT('',(132.89005,-155.22,1.51)); +#247506 = DIRECTION('',(0.,1.,0.)); +#247507 = DIRECTION('',(1.,0.,0.)); +#247508 = ADVANCED_FACE('',(#247509),#247534,.T.); +#247509 = FACE_BOUND('',#247510,.T.); +#247510 = EDGE_LOOP('',(#247511,#247512,#247520,#247528)); +#247511 = ORIENTED_EDGE('',*,*,#247490,.T.); +#247512 = ORIENTED_EDGE('',*,*,#247513,.T.); +#247513 = EDGE_CURVE('',#247483,#247514,#247516,.T.); +#247514 = VERTEX_POINT('',#247515); +#247515 = CARTESIAN_POINT('',(133.610129,-155.082538,1.545)); +#247516 = LINE('',#247517,#247518); +#247517 = CARTESIAN_POINT('',(133.46995,-155.22,1.545)); +#247518 = VECTOR('',#247519,1.); +#247519 = DIRECTION('',(0.71399235399,0.700153496345,0.)); +#247520 = ORIENTED_EDGE('',*,*,#247521,.F.); +#247521 = EDGE_CURVE('',#247522,#247514,#247524,.T.); +#247522 = VERTEX_POINT('',#247523); +#247523 = CARTESIAN_POINT('',(133.610129,-155.082538,1.51)); +#247524 = LINE('',#247525,#247526); +#247525 = CARTESIAN_POINT('',(133.610129,-155.082538,1.51)); +#247526 = VECTOR('',#247527,1.); +#247527 = DIRECTION('',(0.,0.,1.)); +#247528 = ORIENTED_EDGE('',*,*,#247529,.F.); +#247529 = EDGE_CURVE('',#247491,#247522,#247530,.T.); +#247530 = LINE('',#247531,#247532); +#247531 = CARTESIAN_POINT('',(133.46995,-155.22,1.51)); +#247532 = VECTOR('',#247533,1.); +#247533 = DIRECTION('',(0.71399235399,0.700153496345,0.)); +#247534 = PLANE('',#247535); +#247535 = AXIS2_PLACEMENT_3D('',#247536,#247537,#247538); +#247536 = CARTESIAN_POINT('',(133.46995,-155.22,1.51)); +#247537 = DIRECTION('',(-0.700153496345,0.71399235399,0.)); +#247538 = DIRECTION('',(0.71399235399,0.700153496345,0.)); +#247539 = ADVANCED_FACE('',(#247540),#247567,.T.); +#247540 = FACE_BOUND('',#247541,.T.); +#247541 = EDGE_LOOP('',(#247542,#247543,#247552,#247560)); +#247542 = ORIENTED_EDGE('',*,*,#247521,.T.); +#247543 = ORIENTED_EDGE('',*,*,#247544,.T.); +#247544 = EDGE_CURVE('',#247514,#247545,#247547,.T.); +#247545 = VERTEX_POINT('',#247546); +#247546 = CARTESIAN_POINT('',(133.721248,-155.082543,1.545)); +#247547 = CIRCLE('',#247548,9.999986436488E-02); +#247548 = AXIS2_PLACEMENT_3D('',#247549,#247550,#247551); +#247549 = CARTESIAN_POINT('',(133.66568475873,-155.165685643,1.545)); +#247550 = DIRECTION('',(0.,0.,-1.)); +#247551 = DIRECTION('',(-0.555558340874,0.831477558257,0.)); +#247552 = ORIENTED_EDGE('',*,*,#247553,.F.); +#247553 = EDGE_CURVE('',#247554,#247545,#247556,.T.); +#247554 = VERTEX_POINT('',#247555); +#247555 = CARTESIAN_POINT('',(133.721248,-155.082543,1.51)); +#247556 = LINE('',#247557,#247558); +#247557 = CARTESIAN_POINT('',(133.721248,-155.082543,1.51)); +#247558 = VECTOR('',#247559,1.); +#247559 = DIRECTION('',(0.,0.,1.)); +#247560 = ORIENTED_EDGE('',*,*,#247561,.F.); +#247561 = EDGE_CURVE('',#247522,#247554,#247562,.T.); +#247562 = CIRCLE('',#247563,9.999986436488E-02); +#247563 = AXIS2_PLACEMENT_3D('',#247564,#247565,#247566); +#247564 = CARTESIAN_POINT('',(133.66568475873,-155.165685643,1.51)); +#247565 = DIRECTION('',(0.,0.,-1.)); +#247566 = DIRECTION('',(-0.555558340874,0.831477558257,0.)); +#247567 = CYLINDRICAL_SURFACE('',#247568,9.999986436488E-02); +#247568 = AXIS2_PLACEMENT_3D('',#247569,#247570,#247571); +#247569 = CARTESIAN_POINT('',(133.66568475873,-155.165685643,1.51)); +#247570 = DIRECTION('',(0.,0.,-1.)); +#247571 = DIRECTION('',(-0.555558340874,0.831477558257,0.)); +#247572 = ADVANCED_FACE('',(#247573),#247598,.T.); +#247573 = FACE_BOUND('',#247574,.T.); +#247574 = EDGE_LOOP('',(#247575,#247576,#247584,#247592)); +#247575 = ORIENTED_EDGE('',*,*,#247553,.T.); +#247576 = ORIENTED_EDGE('',*,*,#247577,.T.); +#247577 = EDGE_CURVE('',#247545,#247578,#247580,.T.); +#247578 = VERTEX_POINT('',#247579); +#247579 = CARTESIAN_POINT('',(134.041421,-155.4,1.545)); +#247580 = LINE('',#247581,#247582); +#247581 = CARTESIAN_POINT('',(133.721248,-155.082543,1.545)); +#247582 = VECTOR('',#247583,1.); +#247583 = DIRECTION('',(0.710112277226,-0.704088455901,0.)); +#247584 = ORIENTED_EDGE('',*,*,#247585,.F.); +#247585 = EDGE_CURVE('',#247586,#247578,#247588,.T.); +#247586 = VERTEX_POINT('',#247587); +#247587 = CARTESIAN_POINT('',(134.041421,-155.4,1.51)); +#247588 = LINE('',#247589,#247590); +#247589 = CARTESIAN_POINT('',(134.041421,-155.4,1.51)); +#247590 = VECTOR('',#247591,1.); +#247591 = DIRECTION('',(0.,0.,1.)); +#247592 = ORIENTED_EDGE('',*,*,#247593,.F.); +#247593 = EDGE_CURVE('',#247554,#247586,#247594,.T.); +#247594 = LINE('',#247595,#247596); +#247595 = CARTESIAN_POINT('',(133.721248,-155.082543,1.51)); +#247596 = VECTOR('',#247597,1.); +#247597 = DIRECTION('',(0.710112277226,-0.704088455901,0.)); +#247598 = PLANE('',#247599); +#247599 = AXIS2_PLACEMENT_3D('',#247600,#247601,#247602); +#247600 = CARTESIAN_POINT('',(133.721248,-155.082543,1.51)); +#247601 = DIRECTION('',(0.704088455901,0.710112277226,-0.)); +#247602 = DIRECTION('',(0.710112277226,-0.704088455901,0.)); +#247603 = ADVANCED_FACE('',(#247604),#247629,.T.); +#247604 = FACE_BOUND('',#247605,.T.); +#247605 = EDGE_LOOP('',(#247606,#247607,#247615,#247623)); +#247606 = ORIENTED_EDGE('',*,*,#247585,.T.); +#247607 = ORIENTED_EDGE('',*,*,#247608,.T.); +#247608 = EDGE_CURVE('',#247578,#247609,#247611,.T.); +#247609 = VERTEX_POINT('',#247610); +#247610 = CARTESIAN_POINT('',(135.020988,-155.4,1.545)); +#247611 = LINE('',#247612,#247613); +#247612 = CARTESIAN_POINT('',(134.041421,-155.4,1.545)); +#247613 = VECTOR('',#247614,1.); +#247614 = DIRECTION('',(1.,0.,0.)); +#247615 = ORIENTED_EDGE('',*,*,#247616,.F.); +#247616 = EDGE_CURVE('',#247617,#247609,#247619,.T.); +#247617 = VERTEX_POINT('',#247618); +#247618 = CARTESIAN_POINT('',(135.020988,-155.4,1.51)); +#247619 = LINE('',#247620,#247621); +#247620 = CARTESIAN_POINT('',(135.020988,-155.4,1.51)); +#247621 = VECTOR('',#247622,1.); +#247622 = DIRECTION('',(0.,0.,1.)); +#247623 = ORIENTED_EDGE('',*,*,#247624,.F.); +#247624 = EDGE_CURVE('',#247586,#247617,#247625,.T.); +#247625 = LINE('',#247626,#247627); +#247626 = CARTESIAN_POINT('',(134.041421,-155.4,1.51)); +#247627 = VECTOR('',#247628,1.); +#247628 = DIRECTION('',(1.,0.,0.)); +#247629 = PLANE('',#247630); +#247630 = AXIS2_PLACEMENT_3D('',#247631,#247632,#247633); +#247631 = CARTESIAN_POINT('',(134.041421,-155.4,1.51)); +#247632 = DIRECTION('',(0.,1.,0.)); +#247633 = DIRECTION('',(1.,0.,0.)); +#247634 = ADVANCED_FACE('',(#247635),#247660,.T.); +#247635 = FACE_BOUND('',#247636,.T.); +#247636 = EDGE_LOOP('',(#247637,#247638,#247646,#247654)); +#247637 = ORIENTED_EDGE('',*,*,#247616,.T.); +#247638 = ORIENTED_EDGE('',*,*,#247639,.T.); +#247639 = EDGE_CURVE('',#247609,#247640,#247642,.T.); +#247640 = VERTEX_POINT('',#247641); +#247641 = CARTESIAN_POINT('',(136.65,-153.770988,1.545)); +#247642 = LINE('',#247643,#247644); +#247643 = CARTESIAN_POINT('',(135.020988,-155.4,1.545)); +#247644 = VECTOR('',#247645,1.); +#247645 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247646 = ORIENTED_EDGE('',*,*,#247647,.F.); +#247647 = EDGE_CURVE('',#247648,#247640,#247650,.T.); +#247648 = VERTEX_POINT('',#247649); +#247649 = CARTESIAN_POINT('',(136.65,-153.770988,1.51)); +#247650 = LINE('',#247651,#247652); +#247651 = CARTESIAN_POINT('',(136.65,-153.770988,1.51)); +#247652 = VECTOR('',#247653,1.); +#247653 = DIRECTION('',(0.,0.,1.)); +#247654 = ORIENTED_EDGE('',*,*,#247655,.F.); +#247655 = EDGE_CURVE('',#247617,#247648,#247656,.T.); +#247656 = LINE('',#247657,#247658); +#247657 = CARTESIAN_POINT('',(135.020988,-155.4,1.51)); +#247658 = VECTOR('',#247659,1.); +#247659 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247660 = PLANE('',#247661); +#247661 = AXIS2_PLACEMENT_3D('',#247662,#247663,#247664); +#247662 = CARTESIAN_POINT('',(135.020988,-155.4,1.51)); +#247663 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#247664 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247665 = ADVANCED_FACE('',(#247666),#247691,.T.); +#247666 = FACE_BOUND('',#247667,.T.); +#247667 = EDGE_LOOP('',(#247668,#247669,#247677,#247685)); +#247668 = ORIENTED_EDGE('',*,*,#247647,.T.); +#247669 = ORIENTED_EDGE('',*,*,#247670,.T.); +#247670 = EDGE_CURVE('',#247640,#247671,#247673,.T.); +#247671 = VERTEX_POINT('',#247672); +#247672 = CARTESIAN_POINT('',(136.651921,-153.035491,1.545)); +#247673 = LINE('',#247674,#247675); +#247674 = CARTESIAN_POINT('',(136.65,-153.770988,1.545)); +#247675 = VECTOR('',#247676,1.); +#247676 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#247677 = ORIENTED_EDGE('',*,*,#247678,.F.); +#247678 = EDGE_CURVE('',#247679,#247671,#247681,.T.); +#247679 = VERTEX_POINT('',#247680); +#247680 = CARTESIAN_POINT('',(136.651921,-153.035491,1.51)); +#247681 = LINE('',#247682,#247683); +#247682 = CARTESIAN_POINT('',(136.651921,-153.035491,1.51)); +#247683 = VECTOR('',#247684,1.); +#247684 = DIRECTION('',(0.,0.,1.)); +#247685 = ORIENTED_EDGE('',*,*,#247686,.F.); +#247686 = EDGE_CURVE('',#247648,#247679,#247687,.T.); +#247687 = LINE('',#247688,#247689); +#247688 = CARTESIAN_POINT('',(136.65,-153.770988,1.51)); +#247689 = VECTOR('',#247690,1.); +#247690 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#247691 = PLANE('',#247692); +#247692 = AXIS2_PLACEMENT_3D('',#247693,#247694,#247695); +#247693 = CARTESIAN_POINT('',(136.65,-153.770988,1.51)); +#247694 = DIRECTION('',(-0.999996589165,2.611830432711E-03,0.)); +#247695 = DIRECTION('',(2.611830432711E-03,0.999996589165,0.)); +#247696 = ADVANCED_FACE('',(#247697),#247722,.T.); +#247697 = FACE_BOUND('',#247698,.T.); +#247698 = EDGE_LOOP('',(#247699,#247700,#247708,#247716)); +#247699 = ORIENTED_EDGE('',*,*,#247678,.T.); +#247700 = ORIENTED_EDGE('',*,*,#247701,.T.); +#247701 = EDGE_CURVE('',#247671,#247702,#247704,.T.); +#247702 = VERTEX_POINT('',#247703); +#247703 = CARTESIAN_POINT('',(136.666853,-152.999443,1.545)); +#247704 = LINE('',#247705,#247706); +#247705 = CARTESIAN_POINT('',(136.651921,-153.035491,1.545)); +#247706 = VECTOR('',#247707,1.); +#247707 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#247708 = ORIENTED_EDGE('',*,*,#247709,.F.); +#247709 = EDGE_CURVE('',#247710,#247702,#247712,.T.); +#247710 = VERTEX_POINT('',#247711); +#247711 = CARTESIAN_POINT('',(136.666853,-152.999443,1.51)); +#247712 = LINE('',#247713,#247714); +#247713 = CARTESIAN_POINT('',(136.666853,-152.999443,1.51)); +#247714 = VECTOR('',#247715,1.); +#247715 = DIRECTION('',(0.,0.,1.)); +#247716 = ORIENTED_EDGE('',*,*,#247717,.F.); +#247717 = EDGE_CURVE('',#247679,#247710,#247718,.T.); +#247718 = LINE('',#247719,#247720); +#247719 = CARTESIAN_POINT('',(136.651921,-153.035491,1.51)); +#247720 = VECTOR('',#247721,1.); +#247721 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#247722 = PLANE('',#247723); +#247723 = AXIS2_PLACEMENT_3D('',#247724,#247725,#247726); +#247724 = CARTESIAN_POINT('',(136.651921,-153.035491,1.51)); +#247725 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#247726 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#247727 = ADVANCED_FACE('',(#247728),#247744,.T.); +#247728 = FACE_BOUND('',#247729,.T.); +#247729 = EDGE_LOOP('',(#247730,#247731,#247737,#247738)); +#247730 = ORIENTED_EDGE('',*,*,#247709,.T.); +#247731 = ORIENTED_EDGE('',*,*,#247732,.T.); +#247732 = EDGE_CURVE('',#247702,#246601,#247733,.T.); +#247733 = LINE('',#247734,#247735); +#247734 = CARTESIAN_POINT('',(136.666853,-152.999443,1.545)); +#247735 = VECTOR('',#247736,1.); +#247736 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247737 = ORIENTED_EDGE('',*,*,#246598,.F.); +#247738 = ORIENTED_EDGE('',*,*,#247739,.F.); +#247739 = EDGE_CURVE('',#247710,#246599,#247740,.T.); +#247740 = LINE('',#247741,#247742); +#247741 = CARTESIAN_POINT('',(136.666853,-152.999443,1.51)); +#247742 = VECTOR('',#247743,1.); +#247743 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247744 = PLANE('',#247745); +#247745 = AXIS2_PLACEMENT_3D('',#247746,#247747,#247748); +#247746 = CARTESIAN_POINT('',(136.666853,-152.999443,1.51)); +#247747 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#247748 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#247749 = ADVANCED_FACE('',(#247750),#247789,.F.); +#247750 = FACE_BOUND('',#247751,.T.); +#247751 = EDGE_LOOP('',(#247752,#247753,#247754,#247755,#247756,#247757, + #247758,#247759,#247760,#247761,#247762,#247763,#247764,#247765, + #247766,#247767,#247768,#247769,#247770,#247771,#247772,#247773, + #247774,#247775,#247776,#247777,#247778,#247779,#247780,#247781, + #247782,#247783,#247784,#247785,#247786,#247787,#247788)); +#247752 = ORIENTED_EDGE('',*,*,#246625,.T.); +#247753 = ORIENTED_EDGE('',*,*,#246657,.T.); +#247754 = ORIENTED_EDGE('',*,*,#246688,.T.); +#247755 = ORIENTED_EDGE('',*,*,#246719,.T.); +#247756 = ORIENTED_EDGE('',*,*,#246750,.T.); +#247757 = ORIENTED_EDGE('',*,*,#246781,.T.); +#247758 = ORIENTED_EDGE('',*,*,#246812,.T.); +#247759 = ORIENTED_EDGE('',*,*,#246844,.T.); +#247760 = ORIENTED_EDGE('',*,*,#246876,.T.); +#247761 = ORIENTED_EDGE('',*,*,#246907,.T.); +#247762 = ORIENTED_EDGE('',*,*,#246938,.T.); +#247763 = ORIENTED_EDGE('',*,*,#246969,.T.); +#247764 = ORIENTED_EDGE('',*,*,#247000,.T.); +#247765 = ORIENTED_EDGE('',*,*,#247031,.T.); +#247766 = ORIENTED_EDGE('',*,*,#247062,.T.); +#247767 = ORIENTED_EDGE('',*,*,#247093,.T.); +#247768 = ORIENTED_EDGE('',*,*,#247124,.T.); +#247769 = ORIENTED_EDGE('',*,*,#247155,.T.); +#247770 = ORIENTED_EDGE('',*,*,#247186,.T.); +#247771 = ORIENTED_EDGE('',*,*,#247217,.T.); +#247772 = ORIENTED_EDGE('',*,*,#247248,.T.); +#247773 = ORIENTED_EDGE('',*,*,#247279,.T.); +#247774 = ORIENTED_EDGE('',*,*,#247310,.T.); +#247775 = ORIENTED_EDGE('',*,*,#247342,.T.); +#247776 = ORIENTED_EDGE('',*,*,#247374,.T.); +#247777 = ORIENTED_EDGE('',*,*,#247405,.T.); +#247778 = ORIENTED_EDGE('',*,*,#247436,.T.); +#247779 = ORIENTED_EDGE('',*,*,#247467,.T.); +#247780 = ORIENTED_EDGE('',*,*,#247498,.T.); +#247781 = ORIENTED_EDGE('',*,*,#247529,.T.); +#247782 = ORIENTED_EDGE('',*,*,#247561,.T.); +#247783 = ORIENTED_EDGE('',*,*,#247593,.T.); +#247784 = ORIENTED_EDGE('',*,*,#247624,.T.); +#247785 = ORIENTED_EDGE('',*,*,#247655,.T.); +#247786 = ORIENTED_EDGE('',*,*,#247686,.T.); +#247787 = ORIENTED_EDGE('',*,*,#247717,.T.); +#247788 = ORIENTED_EDGE('',*,*,#247739,.T.); +#247789 = PLANE('',#247790); +#247790 = AXIS2_PLACEMENT_3D('',#247791,#247792,#247793); +#247791 = CARTESIAN_POINT('',(0.,0.,1.51)); +#247792 = DIRECTION('',(0.,0.,1.)); +#247793 = DIRECTION('',(1.,0.,-0.)); +#247794 = ADVANCED_FACE('',(#247795),#247834,.T.); +#247795 = FACE_BOUND('',#247796,.F.); +#247796 = EDGE_LOOP('',(#247797,#247798,#247799,#247800,#247801,#247802, + #247803,#247804,#247805,#247806,#247807,#247808,#247809,#247810, + #247811,#247812,#247813,#247814,#247815,#247816,#247817,#247818, + #247819,#247820,#247821,#247822,#247823,#247824,#247825,#247826, + #247827,#247828,#247829,#247830,#247831,#247832,#247833)); +#247797 = ORIENTED_EDGE('',*,*,#246608,.T.); +#247798 = ORIENTED_EDGE('',*,*,#246641,.T.); +#247799 = ORIENTED_EDGE('',*,*,#246672,.T.); +#247800 = ORIENTED_EDGE('',*,*,#246703,.T.); +#247801 = ORIENTED_EDGE('',*,*,#246734,.T.); +#247802 = ORIENTED_EDGE('',*,*,#246765,.T.); +#247803 = ORIENTED_EDGE('',*,*,#246796,.T.); +#247804 = ORIENTED_EDGE('',*,*,#246827,.T.); +#247805 = ORIENTED_EDGE('',*,*,#246860,.T.); +#247806 = ORIENTED_EDGE('',*,*,#246891,.T.); +#247807 = ORIENTED_EDGE('',*,*,#246922,.T.); +#247808 = ORIENTED_EDGE('',*,*,#246953,.T.); +#247809 = ORIENTED_EDGE('',*,*,#246984,.T.); +#247810 = ORIENTED_EDGE('',*,*,#247015,.T.); +#247811 = ORIENTED_EDGE('',*,*,#247046,.T.); +#247812 = ORIENTED_EDGE('',*,*,#247077,.T.); +#247813 = ORIENTED_EDGE('',*,*,#247108,.T.); +#247814 = ORIENTED_EDGE('',*,*,#247139,.T.); +#247815 = ORIENTED_EDGE('',*,*,#247170,.T.); +#247816 = ORIENTED_EDGE('',*,*,#247201,.T.); +#247817 = ORIENTED_EDGE('',*,*,#247232,.T.); +#247818 = ORIENTED_EDGE('',*,*,#247263,.T.); +#247819 = ORIENTED_EDGE('',*,*,#247294,.T.); +#247820 = ORIENTED_EDGE('',*,*,#247325,.T.); +#247821 = ORIENTED_EDGE('',*,*,#247358,.T.); +#247822 = ORIENTED_EDGE('',*,*,#247389,.T.); +#247823 = ORIENTED_EDGE('',*,*,#247420,.T.); +#247824 = ORIENTED_EDGE('',*,*,#247451,.T.); +#247825 = ORIENTED_EDGE('',*,*,#247482,.T.); +#247826 = ORIENTED_EDGE('',*,*,#247513,.T.); +#247827 = ORIENTED_EDGE('',*,*,#247544,.T.); +#247828 = ORIENTED_EDGE('',*,*,#247577,.T.); +#247829 = ORIENTED_EDGE('',*,*,#247608,.T.); +#247830 = ORIENTED_EDGE('',*,*,#247639,.T.); +#247831 = ORIENTED_EDGE('',*,*,#247670,.T.); +#247832 = ORIENTED_EDGE('',*,*,#247701,.T.); +#247833 = ORIENTED_EDGE('',*,*,#247732,.T.); +#247834 = PLANE('',#247835); +#247835 = AXIS2_PLACEMENT_3D('',#247836,#247837,#247838); +#247836 = CARTESIAN_POINT('',(0.,0.,1.545)); +#247837 = DIRECTION('',(0.,0.,1.)); +#247838 = DIRECTION('',(1.,0.,-0.)); +#247839 = MANIFOLD_SOLID_BREP('',#247840); +#247840 = CLOSED_SHELL('',(#247841,#247881,#247912,#247945,#247976, + #248007,#248038,#248069,#248100,#248131,#248162,#248193,#248224, + #248257,#248288,#248319,#248350,#248381,#248414,#248445,#248476, + #248507,#248538,#248569,#248600,#248633,#248664,#248695,#248726, + #248757,#248788,#248819,#248852,#248883,#248914,#248945,#248976, + #249007,#249038,#249069,#249100,#249131,#249162,#249193,#249224, + #249255,#249286,#249317,#249348,#249370,#249427)); +#247841 = ADVANCED_FACE('',(#247842),#247876,.T.); +#247842 = FACE_BOUND('',#247843,.T.); +#247843 = EDGE_LOOP('',(#247844,#247854,#247862,#247870)); +#247844 = ORIENTED_EDGE('',*,*,#247845,.T.); +#247845 = EDGE_CURVE('',#247846,#247848,#247850,.T.); +#247846 = VERTEX_POINT('',#247847); +#247847 = CARTESIAN_POINT('',(128.554442,-79.806853,1.51)); +#247848 = VERTEX_POINT('',#247849); +#247849 = CARTESIAN_POINT('',(128.554442,-79.806853,1.545)); +#247850 = LINE('',#247851,#247852); +#247851 = CARTESIAN_POINT('',(128.554442,-79.806853,1.51)); +#247852 = VECTOR('',#247853,1.); +#247853 = DIRECTION('',(0.,0.,1.)); +#247854 = ORIENTED_EDGE('',*,*,#247855,.T.); +#247855 = EDGE_CURVE('',#247848,#247856,#247858,.T.); +#247856 = VERTEX_POINT('',#247857); +#247857 = CARTESIAN_POINT('',(128.590491,-79.791921,1.545)); +#247858 = LINE('',#247859,#247860); +#247859 = CARTESIAN_POINT('',(128.554442,-79.806853,1.545)); +#247860 = VECTOR('',#247861,1.); +#247861 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#247862 = ORIENTED_EDGE('',*,*,#247863,.F.); +#247863 = EDGE_CURVE('',#247864,#247856,#247866,.T.); +#247864 = VERTEX_POINT('',#247865); +#247865 = CARTESIAN_POINT('',(128.590491,-79.791921,1.51)); +#247866 = LINE('',#247867,#247868); +#247867 = CARTESIAN_POINT('',(128.590491,-79.791921,1.51)); +#247868 = VECTOR('',#247869,1.); +#247869 = DIRECTION('',(0.,0.,1.)); +#247870 = ORIENTED_EDGE('',*,*,#247871,.F.); +#247871 = EDGE_CURVE('',#247846,#247864,#247872,.T.); +#247872 = LINE('',#247873,#247874); +#247873 = CARTESIAN_POINT('',(128.554442,-79.806853,1.51)); +#247874 = VECTOR('',#247875,1.); +#247875 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#247876 = PLANE('',#247877); +#247877 = AXIS2_PLACEMENT_3D('',#247878,#247879,#247880); +#247878 = CARTESIAN_POINT('',(128.554442,-79.806853,1.51)); +#247879 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#247880 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#247881 = ADVANCED_FACE('',(#247882),#247907,.T.); +#247882 = FACE_BOUND('',#247883,.T.); +#247883 = EDGE_LOOP('',(#247884,#247885,#247893,#247901)); +#247884 = ORIENTED_EDGE('',*,*,#247863,.T.); +#247885 = ORIENTED_EDGE('',*,*,#247886,.T.); +#247886 = EDGE_CURVE('',#247856,#247887,#247889,.T.); +#247887 = VERTEX_POINT('',#247888); +#247888 = CARTESIAN_POINT('',(129.269509,-79.791921,1.545)); +#247889 = LINE('',#247890,#247891); +#247890 = CARTESIAN_POINT('',(128.590491,-79.791921,1.545)); +#247891 = VECTOR('',#247892,1.); +#247892 = DIRECTION('',(1.,0.,0.)); +#247893 = ORIENTED_EDGE('',*,*,#247894,.F.); +#247894 = EDGE_CURVE('',#247895,#247887,#247897,.T.); +#247895 = VERTEX_POINT('',#247896); +#247896 = CARTESIAN_POINT('',(129.269509,-79.791921,1.51)); +#247897 = LINE('',#247898,#247899); +#247898 = CARTESIAN_POINT('',(129.269509,-79.791921,1.51)); +#247899 = VECTOR('',#247900,1.); +#247900 = DIRECTION('',(0.,0.,1.)); +#247901 = ORIENTED_EDGE('',*,*,#247902,.F.); +#247902 = EDGE_CURVE('',#247864,#247895,#247903,.T.); +#247903 = LINE('',#247904,#247905); +#247904 = CARTESIAN_POINT('',(128.590491,-79.791921,1.51)); +#247905 = VECTOR('',#247906,1.); +#247906 = DIRECTION('',(1.,0.,0.)); +#247907 = PLANE('',#247908); +#247908 = AXIS2_PLACEMENT_3D('',#247909,#247910,#247911); +#247909 = CARTESIAN_POINT('',(128.590491,-79.791921,1.51)); +#247910 = DIRECTION('',(0.,1.,0.)); +#247911 = DIRECTION('',(1.,0.,0.)); +#247912 = ADVANCED_FACE('',(#247913),#247940,.T.); +#247913 = FACE_BOUND('',#247914,.T.); +#247914 = EDGE_LOOP('',(#247915,#247916,#247925,#247933)); +#247915 = ORIENTED_EDGE('',*,*,#247894,.T.); +#247916 = ORIENTED_EDGE('',*,*,#247917,.T.); +#247917 = EDGE_CURVE('',#247887,#247918,#247920,.T.); +#247918 = VERTEX_POINT('',#247919); +#247919 = CARTESIAN_POINT('',(129.269509,-79.988079,1.545)); +#247920 = CIRCLE('',#247921,0.100000456609); +#247921 = AXIS2_PLACEMENT_3D('',#247922,#247923,#247924); +#247922 = CARTESIAN_POINT('',(129.25,-79.89,1.545)); +#247923 = DIRECTION('',(0.,0.,-1.)); +#247924 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#247925 = ORIENTED_EDGE('',*,*,#247926,.F.); +#247926 = EDGE_CURVE('',#247927,#247918,#247929,.T.); +#247927 = VERTEX_POINT('',#247928); +#247928 = CARTESIAN_POINT('',(129.269509,-79.988079,1.51)); +#247929 = LINE('',#247930,#247931); +#247930 = CARTESIAN_POINT('',(129.269509,-79.988079,1.51)); +#247931 = VECTOR('',#247932,1.); +#247932 = DIRECTION('',(0.,0.,1.)); +#247933 = ORIENTED_EDGE('',*,*,#247934,.F.); +#247934 = EDGE_CURVE('',#247895,#247927,#247935,.T.); +#247935 = CIRCLE('',#247936,0.100000456609); +#247936 = AXIS2_PLACEMENT_3D('',#247937,#247938,#247939); +#247937 = CARTESIAN_POINT('',(129.25,-79.89,1.51)); +#247938 = DIRECTION('',(0.,0.,-1.)); +#247939 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#247940 = CYLINDRICAL_SURFACE('',#247941,0.100000456609); +#247941 = AXIS2_PLACEMENT_3D('',#247942,#247943,#247944); +#247942 = CARTESIAN_POINT('',(129.25,-79.89,1.51)); +#247943 = DIRECTION('',(0.,0.,-1.)); +#247944 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#247945 = ADVANCED_FACE('',(#247946),#247971,.T.); +#247946 = FACE_BOUND('',#247947,.T.); +#247947 = EDGE_LOOP('',(#247948,#247949,#247957,#247965)); +#247948 = ORIENTED_EDGE('',*,*,#247926,.T.); +#247949 = ORIENTED_EDGE('',*,*,#247950,.T.); +#247950 = EDGE_CURVE('',#247918,#247951,#247953,.T.); +#247951 = VERTEX_POINT('',#247952); +#247952 = CARTESIAN_POINT('',(128.651421,-79.99,1.545)); +#247953 = LINE('',#247954,#247955); +#247954 = CARTESIAN_POINT('',(129.269509,-79.988079,1.545)); +#247955 = VECTOR('',#247956,1.); +#247956 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#247957 = ORIENTED_EDGE('',*,*,#247958,.F.); +#247958 = EDGE_CURVE('',#247959,#247951,#247961,.T.); +#247959 = VERTEX_POINT('',#247960); +#247960 = CARTESIAN_POINT('',(128.651421,-79.99,1.51)); +#247961 = LINE('',#247962,#247963); +#247962 = CARTESIAN_POINT('',(128.651421,-79.99,1.51)); +#247963 = VECTOR('',#247964,1.); +#247964 = DIRECTION('',(0.,0.,1.)); +#247965 = ORIENTED_EDGE('',*,*,#247966,.F.); +#247966 = EDGE_CURVE('',#247927,#247959,#247967,.T.); +#247967 = LINE('',#247968,#247969); +#247968 = CARTESIAN_POINT('',(129.269509,-79.988079,1.51)); +#247969 = VECTOR('',#247970,1.); +#247970 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#247971 = PLANE('',#247972); +#247972 = AXIS2_PLACEMENT_3D('',#247973,#247974,#247975); +#247973 = CARTESIAN_POINT('',(129.269509,-79.988079,1.51)); +#247974 = DIRECTION('',(3.107956669802E-03,-0.999995170291,0.)); +#247975 = DIRECTION('',(-0.999995170291,-3.107956669802E-03,0.)); +#247976 = ADVANCED_FACE('',(#247977),#248002,.T.); +#247977 = FACE_BOUND('',#247978,.T.); +#247978 = EDGE_LOOP('',(#247979,#247980,#247988,#247996)); +#247979 = ORIENTED_EDGE('',*,*,#247958,.T.); +#247980 = ORIENTED_EDGE('',*,*,#247981,.T.); +#247981 = EDGE_CURVE('',#247951,#247982,#247984,.T.); +#247982 = VERTEX_POINT('',#247983); +#247983 = CARTESIAN_POINT('',(127.5,-81.141421,1.545)); +#247984 = LINE('',#247985,#247986); +#247985 = CARTESIAN_POINT('',(128.651421,-79.99,1.545)); +#247986 = VECTOR('',#247987,1.); +#247987 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#247988 = ORIENTED_EDGE('',*,*,#247989,.F.); +#247989 = EDGE_CURVE('',#247990,#247982,#247992,.T.); +#247990 = VERTEX_POINT('',#247991); +#247991 = CARTESIAN_POINT('',(127.5,-81.141421,1.51)); +#247992 = LINE('',#247993,#247994); +#247993 = CARTESIAN_POINT('',(127.5,-81.141421,1.51)); +#247994 = VECTOR('',#247995,1.); +#247995 = DIRECTION('',(0.,0.,1.)); +#247996 = ORIENTED_EDGE('',*,*,#247997,.F.); +#247997 = EDGE_CURVE('',#247959,#247990,#247998,.T.); +#247998 = LINE('',#247999,#248000); +#247999 = CARTESIAN_POINT('',(128.651421,-79.99,1.51)); +#248000 = VECTOR('',#248001,1.); +#248001 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248002 = PLANE('',#248003); +#248003 = AXIS2_PLACEMENT_3D('',#248004,#248005,#248006); +#248004 = CARTESIAN_POINT('',(128.651421,-79.99,1.51)); +#248005 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248006 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248007 = ADVANCED_FACE('',(#248008),#248033,.T.); +#248008 = FACE_BOUND('',#248009,.T.); +#248009 = EDGE_LOOP('',(#248010,#248011,#248019,#248027)); +#248010 = ORIENTED_EDGE('',*,*,#247989,.T.); +#248011 = ORIENTED_EDGE('',*,*,#248012,.T.); +#248012 = EDGE_CURVE('',#247982,#248013,#248015,.T.); +#248013 = VERTEX_POINT('',#248014); +#248014 = CARTESIAN_POINT('',(127.498079,-99.317225,1.545)); +#248015 = LINE('',#248016,#248017); +#248016 = CARTESIAN_POINT('',(127.5,-81.141421,1.545)); +#248017 = VECTOR('',#248018,1.); +#248018 = DIRECTION('',(-1.056899595345E-04,-0.999999994415,0.)); +#248019 = ORIENTED_EDGE('',*,*,#248020,.F.); +#248020 = EDGE_CURVE('',#248021,#248013,#248023,.T.); +#248021 = VERTEX_POINT('',#248022); +#248022 = CARTESIAN_POINT('',(127.498079,-99.317225,1.51)); +#248023 = LINE('',#248024,#248025); +#248024 = CARTESIAN_POINT('',(127.498079,-99.317225,1.51)); +#248025 = VECTOR('',#248026,1.); +#248026 = DIRECTION('',(0.,0.,1.)); +#248027 = ORIENTED_EDGE('',*,*,#248028,.F.); +#248028 = EDGE_CURVE('',#247990,#248021,#248029,.T.); +#248029 = LINE('',#248030,#248031); +#248030 = CARTESIAN_POINT('',(127.5,-81.141421,1.51)); +#248031 = VECTOR('',#248032,1.); +#248032 = DIRECTION('',(-1.056899595345E-04,-0.999999994415,0.)); +#248033 = PLANE('',#248034); +#248034 = AXIS2_PLACEMENT_3D('',#248035,#248036,#248037); +#248035 = CARTESIAN_POINT('',(127.5,-81.141421,1.51)); +#248036 = DIRECTION('',(0.999999994415,-1.056899595345E-04,0.)); +#248037 = DIRECTION('',(-1.056899595345E-04,-0.999999994415,0.)); +#248038 = ADVANCED_FACE('',(#248039),#248064,.T.); +#248039 = FACE_BOUND('',#248040,.T.); +#248040 = EDGE_LOOP('',(#248041,#248042,#248050,#248058)); +#248041 = ORIENTED_EDGE('',*,*,#248020,.T.); +#248042 = ORIENTED_EDGE('',*,*,#248043,.T.); +#248043 = EDGE_CURVE('',#248013,#248044,#248046,.T.); +#248044 = VERTEX_POINT('',#248045); +#248045 = CARTESIAN_POINT('',(127.483148,-99.353273,1.545)); +#248046 = LINE('',#248047,#248048); +#248047 = CARTESIAN_POINT('',(127.498079,-99.317225,1.545)); +#248048 = VECTOR('',#248049,1.); +#248049 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#248050 = ORIENTED_EDGE('',*,*,#248051,.F.); +#248051 = EDGE_CURVE('',#248052,#248044,#248054,.T.); +#248052 = VERTEX_POINT('',#248053); +#248053 = CARTESIAN_POINT('',(127.483148,-99.353273,1.51)); +#248054 = LINE('',#248055,#248056); +#248055 = CARTESIAN_POINT('',(127.483148,-99.353273,1.51)); +#248056 = VECTOR('',#248057,1.); +#248057 = DIRECTION('',(0.,0.,1.)); +#248058 = ORIENTED_EDGE('',*,*,#248059,.F.); +#248059 = EDGE_CURVE('',#248021,#248052,#248060,.T.); +#248060 = LINE('',#248061,#248062); +#248061 = CARTESIAN_POINT('',(127.498079,-99.317225,1.51)); +#248062 = VECTOR('',#248063,1.); +#248063 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#248064 = PLANE('',#248065); +#248065 = AXIS2_PLACEMENT_3D('',#248066,#248067,#248068); +#248066 = CARTESIAN_POINT('',(127.498079,-99.317225,1.51)); +#248067 = DIRECTION('',(0.923884701879,-0.382670952168,0.)); +#248068 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#248069 = ADVANCED_FACE('',(#248070),#248095,.T.); +#248070 = FACE_BOUND('',#248071,.T.); +#248071 = EDGE_LOOP('',(#248072,#248073,#248081,#248089)); +#248072 = ORIENTED_EDGE('',*,*,#248051,.T.); +#248073 = ORIENTED_EDGE('',*,*,#248074,.T.); +#248074 = EDGE_CURVE('',#248044,#248075,#248077,.T.); +#248075 = VERTEX_POINT('',#248076); +#248076 = CARTESIAN_POINT('',(123.511358,-103.327779,1.545)); +#248077 = LINE('',#248078,#248079); +#248078 = CARTESIAN_POINT('',(127.483148,-99.353273,1.545)); +#248079 = VECTOR('',#248080,1.); +#248080 = DIRECTION('',(-0.706865054712,-0.707348425054,0.)); +#248081 = ORIENTED_EDGE('',*,*,#248082,.F.); +#248082 = EDGE_CURVE('',#248083,#248075,#248085,.T.); +#248083 = VERTEX_POINT('',#248084); +#248084 = CARTESIAN_POINT('',(123.511358,-103.327779,1.51)); +#248085 = LINE('',#248086,#248087); +#248086 = CARTESIAN_POINT('',(123.511358,-103.327779,1.51)); +#248087 = VECTOR('',#248088,1.); +#248088 = DIRECTION('',(0.,0.,1.)); +#248089 = ORIENTED_EDGE('',*,*,#248090,.F.); +#248090 = EDGE_CURVE('',#248052,#248083,#248091,.T.); +#248091 = LINE('',#248092,#248093); +#248092 = CARTESIAN_POINT('',(127.483148,-99.353273,1.51)); +#248093 = VECTOR('',#248094,1.); +#248094 = DIRECTION('',(-0.706865054712,-0.707348425054,0.)); +#248095 = PLANE('',#248096); +#248096 = AXIS2_PLACEMENT_3D('',#248097,#248098,#248099); +#248097 = CARTESIAN_POINT('',(127.483148,-99.353273,1.51)); +#248098 = DIRECTION('',(0.707348425054,-0.706865054712,0.)); +#248099 = DIRECTION('',(-0.706865054712,-0.707348425054,0.)); +#248100 = ADVANCED_FACE('',(#248101),#248126,.T.); +#248101 = FACE_BOUND('',#248102,.T.); +#248102 = EDGE_LOOP('',(#248103,#248104,#248112,#248120)); +#248103 = ORIENTED_EDGE('',*,*,#248082,.T.); +#248104 = ORIENTED_EDGE('',*,*,#248105,.T.); +#248105 = EDGE_CURVE('',#248075,#248106,#248108,.T.); +#248106 = VERTEX_POINT('',#248107); +#248107 = CARTESIAN_POINT('',(123.509437,-107.45668,1.545)); +#248108 = LINE('',#248109,#248110); +#248109 = CARTESIAN_POINT('',(123.511358,-103.327779,1.545)); +#248110 = VECTOR('',#248111,1.); +#248111 = DIRECTION('',(-4.652569272264E-04,-0.999999891768,0.)); +#248112 = ORIENTED_EDGE('',*,*,#248113,.F.); +#248113 = EDGE_CURVE('',#248114,#248106,#248116,.T.); +#248114 = VERTEX_POINT('',#248115); +#248115 = CARTESIAN_POINT('',(123.509437,-107.45668,1.51)); +#248116 = LINE('',#248117,#248118); +#248117 = CARTESIAN_POINT('',(123.509437,-107.45668,1.51)); +#248118 = VECTOR('',#248119,1.); +#248119 = DIRECTION('',(0.,0.,1.)); +#248120 = ORIENTED_EDGE('',*,*,#248121,.F.); +#248121 = EDGE_CURVE('',#248083,#248114,#248122,.T.); +#248122 = LINE('',#248123,#248124); +#248123 = CARTESIAN_POINT('',(123.511358,-103.327779,1.51)); +#248124 = VECTOR('',#248125,1.); +#248125 = DIRECTION('',(-4.652569272264E-04,-0.999999891768,0.)); +#248126 = PLANE('',#248127); +#248127 = AXIS2_PLACEMENT_3D('',#248128,#248129,#248130); +#248128 = CARTESIAN_POINT('',(123.511358,-103.327779,1.51)); +#248129 = DIRECTION('',(0.999999891768,-4.652569272264E-04,0.)); +#248130 = DIRECTION('',(-4.652569272264E-04,-0.999999891768,0.)); +#248131 = ADVANCED_FACE('',(#248132),#248157,.T.); +#248132 = FACE_BOUND('',#248133,.T.); +#248133 = EDGE_LOOP('',(#248134,#248135,#248143,#248151)); +#248134 = ORIENTED_EDGE('',*,*,#248113,.T.); +#248135 = ORIENTED_EDGE('',*,*,#248136,.T.); +#248136 = EDGE_CURVE('',#248106,#248137,#248139,.T.); +#248137 = VERTEX_POINT('',#248138); +#248138 = CARTESIAN_POINT('',(123.494505,-107.492729,1.545)); +#248139 = LINE('',#248140,#248141); +#248140 = CARTESIAN_POINT('',(123.509437,-107.45668,1.545)); +#248141 = VECTOR('',#248142,1.); +#248142 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#248143 = ORIENTED_EDGE('',*,*,#248144,.F.); +#248144 = EDGE_CURVE('',#248145,#248137,#248147,.T.); +#248145 = VERTEX_POINT('',#248146); +#248146 = CARTESIAN_POINT('',(123.494505,-107.492729,1.51)); +#248147 = LINE('',#248148,#248149); +#248148 = CARTESIAN_POINT('',(123.494505,-107.492729,1.51)); +#248149 = VECTOR('',#248150,1.); +#248150 = DIRECTION('',(0.,0.,1.)); +#248151 = ORIENTED_EDGE('',*,*,#248152,.F.); +#248152 = EDGE_CURVE('',#248114,#248145,#248153,.T.); +#248153 = LINE('',#248154,#248155); +#248154 = CARTESIAN_POINT('',(123.509437,-107.45668,1.51)); +#248155 = VECTOR('',#248156,1.); +#248156 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#248157 = PLANE('',#248158); +#248158 = AXIS2_PLACEMENT_3D('',#248159,#248160,#248161); +#248159 = CARTESIAN_POINT('',(123.509437,-107.45668,1.51)); +#248160 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#248161 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#248162 = ADVANCED_FACE('',(#248163),#248188,.T.); +#248163 = FACE_BOUND('',#248164,.T.); +#248164 = EDGE_LOOP('',(#248165,#248166,#248174,#248182)); +#248165 = ORIENTED_EDGE('',*,*,#248144,.T.); +#248166 = ORIENTED_EDGE('',*,*,#248167,.T.); +#248167 = EDGE_CURVE('',#248137,#248168,#248170,.T.); +#248168 = VERTEX_POINT('',#248169); +#248169 = CARTESIAN_POINT('',(121.6,-109.38995,1.545)); +#248170 = LINE('',#248171,#248172); +#248171 = CARTESIAN_POINT('',(123.494505,-107.492729,1.545)); +#248172 = VECTOR('',#248173,1.); +#248173 = DIRECTION('',(-0.706600101814,-0.707613097756,0.)); +#248174 = ORIENTED_EDGE('',*,*,#248175,.F.); +#248175 = EDGE_CURVE('',#248176,#248168,#248178,.T.); +#248176 = VERTEX_POINT('',#248177); +#248177 = CARTESIAN_POINT('',(121.6,-109.38995,1.51)); +#248178 = LINE('',#248179,#248180); +#248179 = CARTESIAN_POINT('',(121.6,-109.38995,1.51)); +#248180 = VECTOR('',#248181,1.); +#248181 = DIRECTION('',(0.,0.,1.)); +#248182 = ORIENTED_EDGE('',*,*,#248183,.F.); +#248183 = EDGE_CURVE('',#248145,#248176,#248184,.T.); +#248184 = LINE('',#248185,#248186); +#248185 = CARTESIAN_POINT('',(123.494505,-107.492729,1.51)); +#248186 = VECTOR('',#248187,1.); +#248187 = DIRECTION('',(-0.706600101814,-0.707613097756,0.)); +#248188 = PLANE('',#248189); +#248189 = AXIS2_PLACEMENT_3D('',#248190,#248191,#248192); +#248190 = CARTESIAN_POINT('',(123.494505,-107.492729,1.51)); +#248191 = DIRECTION('',(0.707613097756,-0.706600101814,0.)); +#248192 = DIRECTION('',(-0.706600101814,-0.707613097756,0.)); +#248193 = ADVANCED_FACE('',(#248194),#248219,.T.); +#248194 = FACE_BOUND('',#248195,.T.); +#248195 = EDGE_LOOP('',(#248196,#248197,#248205,#248213)); +#248196 = ORIENTED_EDGE('',*,*,#248175,.T.); +#248197 = ORIENTED_EDGE('',*,*,#248198,.T.); +#248198 = EDGE_CURVE('',#248168,#248199,#248201,.T.); +#248199 = VERTEX_POINT('',#248200); +#248200 = CARTESIAN_POINT('',(121.598079,-111.419509,1.545)); +#248201 = LINE('',#248202,#248203); +#248202 = CARTESIAN_POINT('',(121.6,-109.38995,1.545)); +#248203 = VECTOR('',#248204,1.); +#248204 = DIRECTION('',(-9.465106160997E-04,-0.999999552059,0.)); +#248205 = ORIENTED_EDGE('',*,*,#248206,.F.); +#248206 = EDGE_CURVE('',#248207,#248199,#248209,.T.); +#248207 = VERTEX_POINT('',#248208); +#248208 = CARTESIAN_POINT('',(121.598079,-111.419509,1.51)); +#248209 = LINE('',#248210,#248211); +#248210 = CARTESIAN_POINT('',(121.598079,-111.419509,1.51)); +#248211 = VECTOR('',#248212,1.); +#248212 = DIRECTION('',(0.,0.,1.)); +#248213 = ORIENTED_EDGE('',*,*,#248214,.F.); +#248214 = EDGE_CURVE('',#248176,#248207,#248215,.T.); +#248215 = LINE('',#248216,#248217); +#248216 = CARTESIAN_POINT('',(121.6,-109.38995,1.51)); +#248217 = VECTOR('',#248218,1.); +#248218 = DIRECTION('',(-9.465106160997E-04,-0.999999552059,0.)); +#248219 = PLANE('',#248220); +#248220 = AXIS2_PLACEMENT_3D('',#248221,#248222,#248223); +#248221 = CARTESIAN_POINT('',(121.6,-109.38995,1.51)); +#248222 = DIRECTION('',(0.999999552059,-9.465106160997E-04,0.)); +#248223 = DIRECTION('',(-9.465106160997E-04,-0.999999552059,0.)); +#248224 = ADVANCED_FACE('',(#248225),#248252,.T.); +#248225 = FACE_BOUND('',#248226,.T.); +#248226 = EDGE_LOOP('',(#248227,#248228,#248237,#248245)); +#248227 = ORIENTED_EDGE('',*,*,#248206,.T.); +#248228 = ORIENTED_EDGE('',*,*,#248229,.T.); +#248229 = EDGE_CURVE('',#248199,#248230,#248232,.T.); +#248230 = VERTEX_POINT('',#248231); +#248231 = CARTESIAN_POINT('',(121.519509,-111.498079,1.545)); +#248232 = CIRCLE('',#248233,0.100002891901); +#248233 = AXIS2_PLACEMENT_3D('',#248234,#248235,#248236); +#248234 = CARTESIAN_POINT('',(121.49999792896,-111.3999979289,1.545)); +#248235 = DIRECTION('',(0.,0.,-1.)); +#248236 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#248237 = ORIENTED_EDGE('',*,*,#248238,.F.); +#248238 = EDGE_CURVE('',#248239,#248230,#248241,.T.); +#248239 = VERTEX_POINT('',#248240); +#248240 = CARTESIAN_POINT('',(121.519509,-111.498079,1.51)); +#248241 = LINE('',#248242,#248243); +#248242 = CARTESIAN_POINT('',(121.519509,-111.498079,1.51)); +#248243 = VECTOR('',#248244,1.); +#248244 = DIRECTION('',(0.,0.,1.)); +#248245 = ORIENTED_EDGE('',*,*,#248246,.F.); +#248246 = EDGE_CURVE('',#248207,#248239,#248247,.T.); +#248247 = CIRCLE('',#248248,0.100002891901); +#248248 = AXIS2_PLACEMENT_3D('',#248249,#248250,#248251); +#248249 = CARTESIAN_POINT('',(121.49999792896,-111.3999979289,1.51)); +#248250 = DIRECTION('',(0.,0.,-1.)); +#248251 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#248252 = CYLINDRICAL_SURFACE('',#248253,0.100002891901); +#248253 = AXIS2_PLACEMENT_3D('',#248254,#248255,#248256); +#248254 = CARTESIAN_POINT('',(121.49999792896,-111.3999979289,1.51)); +#248255 = DIRECTION('',(0.,0.,-1.)); +#248256 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#248257 = ADVANCED_FACE('',(#248258),#248283,.T.); +#248258 = FACE_BOUND('',#248259,.T.); +#248259 = EDGE_LOOP('',(#248260,#248261,#248269,#248277)); +#248260 = ORIENTED_EDGE('',*,*,#248238,.T.); +#248261 = ORIENTED_EDGE('',*,*,#248262,.T.); +#248262 = EDGE_CURVE('',#248230,#248263,#248265,.T.); +#248263 = VERTEX_POINT('',#248264); +#248264 = CARTESIAN_POINT('',(121.292893,-111.5,1.545)); +#248265 = LINE('',#248266,#248267); +#248266 = CARTESIAN_POINT('',(121.519509,-111.498079,1.545)); +#248267 = VECTOR('',#248268,1.); +#248268 = DIRECTION('',(-0.999964073063,-8.476590286433E-03,0.)); +#248269 = ORIENTED_EDGE('',*,*,#248270,.F.); +#248270 = EDGE_CURVE('',#248271,#248263,#248273,.T.); +#248271 = VERTEX_POINT('',#248272); +#248272 = CARTESIAN_POINT('',(121.292893,-111.5,1.51)); +#248273 = LINE('',#248274,#248275); +#248274 = CARTESIAN_POINT('',(121.292893,-111.5,1.51)); +#248275 = VECTOR('',#248276,1.); +#248276 = DIRECTION('',(0.,0.,1.)); +#248277 = ORIENTED_EDGE('',*,*,#248278,.F.); +#248278 = EDGE_CURVE('',#248239,#248271,#248279,.T.); +#248279 = LINE('',#248280,#248281); +#248280 = CARTESIAN_POINT('',(121.519509,-111.498079,1.51)); +#248281 = VECTOR('',#248282,1.); +#248282 = DIRECTION('',(-0.999964073063,-8.476590286433E-03,0.)); +#248283 = PLANE('',#248284); +#248284 = AXIS2_PLACEMENT_3D('',#248285,#248286,#248287); +#248285 = CARTESIAN_POINT('',(121.519509,-111.498079,1.51)); +#248286 = DIRECTION('',(8.476590286433E-03,-0.999964073063,0.)); +#248287 = DIRECTION('',(-0.999964073063,-8.476590286433E-03,0.)); +#248288 = ADVANCED_FACE('',(#248289),#248314,.T.); +#248289 = FACE_BOUND('',#248290,.T.); +#248290 = EDGE_LOOP('',(#248291,#248292,#248300,#248308)); +#248291 = ORIENTED_EDGE('',*,*,#248270,.T.); +#248292 = ORIENTED_EDGE('',*,*,#248293,.T.); +#248293 = EDGE_CURVE('',#248263,#248294,#248296,.T.); +#248294 = VERTEX_POINT('',#248295); +#248295 = CARTESIAN_POINT('',(121.,-111.792893,1.545)); +#248296 = LINE('',#248297,#248298); +#248297 = CARTESIAN_POINT('',(121.292893,-111.5,1.545)); +#248298 = VECTOR('',#248299,1.); +#248299 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248300 = ORIENTED_EDGE('',*,*,#248301,.F.); +#248301 = EDGE_CURVE('',#248302,#248294,#248304,.T.); +#248302 = VERTEX_POINT('',#248303); +#248303 = CARTESIAN_POINT('',(121.,-111.792893,1.51)); +#248304 = LINE('',#248305,#248306); +#248305 = CARTESIAN_POINT('',(121.,-111.792893,1.51)); +#248306 = VECTOR('',#248307,1.); +#248307 = DIRECTION('',(0.,0.,1.)); +#248308 = ORIENTED_EDGE('',*,*,#248309,.F.); +#248309 = EDGE_CURVE('',#248271,#248302,#248310,.T.); +#248310 = LINE('',#248311,#248312); +#248311 = CARTESIAN_POINT('',(121.292893,-111.5,1.51)); +#248312 = VECTOR('',#248313,1.); +#248313 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248314 = PLANE('',#248315); +#248315 = AXIS2_PLACEMENT_3D('',#248316,#248317,#248318); +#248316 = CARTESIAN_POINT('',(121.292893,-111.5,1.51)); +#248317 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248318 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248319 = ADVANCED_FACE('',(#248320),#248345,.T.); +#248320 = FACE_BOUND('',#248321,.T.); +#248321 = EDGE_LOOP('',(#248322,#248323,#248331,#248339)); +#248322 = ORIENTED_EDGE('',*,*,#248301,.T.); +#248323 = ORIENTED_EDGE('',*,*,#248324,.T.); +#248324 = EDGE_CURVE('',#248294,#248325,#248327,.T.); +#248325 = VERTEX_POINT('',#248326); +#248326 = CARTESIAN_POINT('',(121.,-112.207107,1.545)); +#248327 = LINE('',#248328,#248329); +#248328 = CARTESIAN_POINT('',(121.,-111.792893,1.545)); +#248329 = VECTOR('',#248330,1.); +#248330 = DIRECTION('',(0.,-1.,0.)); +#248331 = ORIENTED_EDGE('',*,*,#248332,.F.); +#248332 = EDGE_CURVE('',#248333,#248325,#248335,.T.); +#248333 = VERTEX_POINT('',#248334); +#248334 = CARTESIAN_POINT('',(121.,-112.207107,1.51)); +#248335 = LINE('',#248336,#248337); +#248336 = CARTESIAN_POINT('',(121.,-112.207107,1.51)); +#248337 = VECTOR('',#248338,1.); +#248338 = DIRECTION('',(0.,0.,1.)); +#248339 = ORIENTED_EDGE('',*,*,#248340,.F.); +#248340 = EDGE_CURVE('',#248302,#248333,#248341,.T.); +#248341 = LINE('',#248342,#248343); +#248342 = CARTESIAN_POINT('',(121.,-111.792893,1.51)); +#248343 = VECTOR('',#248344,1.); +#248344 = DIRECTION('',(0.,-1.,0.)); +#248345 = PLANE('',#248346); +#248346 = AXIS2_PLACEMENT_3D('',#248347,#248348,#248349); +#248347 = CARTESIAN_POINT('',(121.,-111.792893,1.51)); +#248348 = DIRECTION('',(1.,0.,-0.)); +#248349 = DIRECTION('',(0.,-1.,0.)); +#248350 = ADVANCED_FACE('',(#248351),#248376,.T.); +#248351 = FACE_BOUND('',#248352,.T.); +#248352 = EDGE_LOOP('',(#248353,#248354,#248362,#248370)); +#248353 = ORIENTED_EDGE('',*,*,#248332,.T.); +#248354 = ORIENTED_EDGE('',*,*,#248355,.T.); +#248355 = EDGE_CURVE('',#248325,#248356,#248358,.T.); +#248356 = VERTEX_POINT('',#248357); +#248357 = CARTESIAN_POINT('',(121.334618,-112.544443,1.545)); +#248358 = LINE('',#248359,#248360); +#248359 = CARTESIAN_POINT('',(121.,-112.207107,1.545)); +#248360 = VECTOR('',#248361,1.); +#248361 = DIRECTION('',(0.704240829857,-0.709961163418,0.)); +#248362 = ORIENTED_EDGE('',*,*,#248363,.F.); +#248363 = EDGE_CURVE('',#248364,#248356,#248366,.T.); +#248364 = VERTEX_POINT('',#248365); +#248365 = CARTESIAN_POINT('',(121.334618,-112.544443,1.51)); +#248366 = LINE('',#248367,#248368); +#248367 = CARTESIAN_POINT('',(121.334618,-112.544443,1.51)); +#248368 = VECTOR('',#248369,1.); +#248369 = DIRECTION('',(0.,0.,1.)); +#248370 = ORIENTED_EDGE('',*,*,#248371,.F.); +#248371 = EDGE_CURVE('',#248333,#248364,#248372,.T.); +#248372 = LINE('',#248373,#248374); +#248373 = CARTESIAN_POINT('',(121.,-112.207107,1.51)); +#248374 = VECTOR('',#248375,1.); +#248375 = DIRECTION('',(0.704240829857,-0.709961163418,0.)); +#248376 = PLANE('',#248377); +#248377 = AXIS2_PLACEMENT_3D('',#248378,#248379,#248380); +#248378 = CARTESIAN_POINT('',(121.,-112.207107,1.51)); +#248379 = DIRECTION('',(0.709961163418,0.704240829857,-0.)); +#248380 = DIRECTION('',(0.704240829857,-0.709961163418,0.)); +#248381 = ADVANCED_FACE('',(#248382),#248409,.T.); +#248382 = FACE_BOUND('',#248383,.T.); +#248383 = EDGE_LOOP('',(#248384,#248385,#248394,#248402)); +#248384 = ORIENTED_EDGE('',*,*,#248363,.T.); +#248385 = ORIENTED_EDGE('',*,*,#248386,.T.); +#248386 = EDGE_CURVE('',#248356,#248387,#248389,.T.); +#248387 = VERTEX_POINT('',#248388); +#248388 = CARTESIAN_POINT('',(121.27098,-112.698079,1.545)); +#248389 = CIRCLE('',#248390,9.999988522646E-02); +#248390 = AXIS2_PLACEMENT_3D('',#248391,#248392,#248393); +#248391 = CARTESIAN_POINT('',(121.25147148592,-112.6000004859,1.545)); +#248392 = DIRECTION('',(0.,0.,-1.)); +#248393 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#248394 = ORIENTED_EDGE('',*,*,#248395,.F.); +#248395 = EDGE_CURVE('',#248396,#248387,#248398,.T.); +#248396 = VERTEX_POINT('',#248397); +#248397 = CARTESIAN_POINT('',(121.27098,-112.698079,1.51)); +#248398 = LINE('',#248399,#248400); +#248399 = CARTESIAN_POINT('',(121.27098,-112.698079,1.51)); +#248400 = VECTOR('',#248401,1.); +#248401 = DIRECTION('',(0.,0.,1.)); +#248402 = ORIENTED_EDGE('',*,*,#248403,.F.); +#248403 = EDGE_CURVE('',#248364,#248396,#248404,.T.); +#248404 = CIRCLE('',#248405,9.999988522646E-02); +#248405 = AXIS2_PLACEMENT_3D('',#248406,#248407,#248408); +#248406 = CARTESIAN_POINT('',(121.25147148592,-112.6000004859,1.51)); +#248407 = DIRECTION('',(0.,0.,-1.)); +#248408 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#248409 = CYLINDRICAL_SURFACE('',#248410,9.999988522646E-02); +#248410 = AXIS2_PLACEMENT_3D('',#248411,#248412,#248413); +#248411 = CARTESIAN_POINT('',(121.25147148592,-112.6000004859,1.51)); +#248412 = DIRECTION('',(0.,0.,-1.)); +#248413 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#248414 = ADVANCED_FACE('',(#248415),#248440,.T.); +#248415 = FACE_BOUND('',#248416,.T.); +#248416 = EDGE_LOOP('',(#248417,#248418,#248426,#248434)); +#248417 = ORIENTED_EDGE('',*,*,#248395,.T.); +#248418 = ORIENTED_EDGE('',*,*,#248419,.T.); +#248419 = EDGE_CURVE('',#248387,#248420,#248422,.T.); +#248420 = VERTEX_POINT('',#248421); +#248421 = CARTESIAN_POINT('',(120.9,-112.7,1.545)); +#248422 = LINE('',#248423,#248424); +#248423 = CARTESIAN_POINT('',(121.27098,-112.698079,1.545)); +#248424 = VECTOR('',#248425,1.); +#248425 = DIRECTION('',(-0.999986593513,-5.178107299945E-03,0.)); +#248426 = ORIENTED_EDGE('',*,*,#248427,.F.); +#248427 = EDGE_CURVE('',#248428,#248420,#248430,.T.); +#248428 = VERTEX_POINT('',#248429); +#248429 = CARTESIAN_POINT('',(120.9,-112.7,1.51)); +#248430 = LINE('',#248431,#248432); +#248431 = CARTESIAN_POINT('',(120.9,-112.7,1.51)); +#248432 = VECTOR('',#248433,1.); +#248433 = DIRECTION('',(0.,0.,1.)); +#248434 = ORIENTED_EDGE('',*,*,#248435,.F.); +#248435 = EDGE_CURVE('',#248396,#248428,#248436,.T.); +#248436 = LINE('',#248437,#248438); +#248437 = CARTESIAN_POINT('',(121.27098,-112.698079,1.51)); +#248438 = VECTOR('',#248439,1.); +#248439 = DIRECTION('',(-0.999986593513,-5.178107299945E-03,0.)); +#248440 = PLANE('',#248441); +#248441 = AXIS2_PLACEMENT_3D('',#248442,#248443,#248444); +#248442 = CARTESIAN_POINT('',(121.27098,-112.698079,1.51)); +#248443 = DIRECTION('',(5.178107299945E-03,-0.999986593513,0.)); +#248444 = DIRECTION('',(-0.999986593513,-5.178107299945E-03,0.)); +#248445 = ADVANCED_FACE('',(#248446),#248471,.T.); +#248446 = FACE_BOUND('',#248447,.T.); +#248447 = EDGE_LOOP('',(#248448,#248449,#248457,#248465)); +#248448 = ORIENTED_EDGE('',*,*,#248427,.T.); +#248449 = ORIENTED_EDGE('',*,*,#248450,.T.); +#248450 = EDGE_CURVE('',#248420,#248451,#248453,.T.); +#248451 = VERTEX_POINT('',#248452); +#248452 = CARTESIAN_POINT('',(120.9,-149.758578,1.545)); +#248453 = LINE('',#248454,#248455); +#248454 = CARTESIAN_POINT('',(120.9,-112.7,1.545)); +#248455 = VECTOR('',#248456,1.); +#248456 = DIRECTION('',(0.,-1.,0.)); +#248457 = ORIENTED_EDGE('',*,*,#248458,.F.); +#248458 = EDGE_CURVE('',#248459,#248451,#248461,.T.); +#248459 = VERTEX_POINT('',#248460); +#248460 = CARTESIAN_POINT('',(120.9,-149.758578,1.51)); +#248461 = LINE('',#248462,#248463); +#248462 = CARTESIAN_POINT('',(120.9,-149.758578,1.51)); +#248463 = VECTOR('',#248464,1.); +#248464 = DIRECTION('',(0.,0.,1.)); +#248465 = ORIENTED_EDGE('',*,*,#248466,.F.); +#248466 = EDGE_CURVE('',#248428,#248459,#248467,.T.); +#248467 = LINE('',#248468,#248469); +#248468 = CARTESIAN_POINT('',(120.9,-112.7,1.51)); +#248469 = VECTOR('',#248470,1.); +#248470 = DIRECTION('',(0.,-1.,0.)); +#248471 = PLANE('',#248472); +#248472 = AXIS2_PLACEMENT_3D('',#248473,#248474,#248475); +#248473 = CARTESIAN_POINT('',(120.9,-112.7,1.51)); +#248474 = DIRECTION('',(1.,0.,-0.)); +#248475 = DIRECTION('',(0.,-1.,0.)); +#248476 = ADVANCED_FACE('',(#248477),#248502,.T.); +#248477 = FACE_BOUND('',#248478,.T.); +#248478 = EDGE_LOOP('',(#248479,#248480,#248488,#248496)); +#248479 = ORIENTED_EDGE('',*,*,#248458,.T.); +#248480 = ORIENTED_EDGE('',*,*,#248481,.T.); +#248481 = EDGE_CURVE('',#248451,#248482,#248484,.T.); +#248482 = VERTEX_POINT('',#248483); +#248483 = CARTESIAN_POINT('',(123.041422,-151.9,1.545)); +#248484 = LINE('',#248485,#248486); +#248485 = CARTESIAN_POINT('',(120.9,-149.758578,1.545)); +#248486 = VECTOR('',#248487,1.); +#248487 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248488 = ORIENTED_EDGE('',*,*,#248489,.F.); +#248489 = EDGE_CURVE('',#248490,#248482,#248492,.T.); +#248490 = VERTEX_POINT('',#248491); +#248491 = CARTESIAN_POINT('',(123.041422,-151.9,1.51)); +#248492 = LINE('',#248493,#248494); +#248493 = CARTESIAN_POINT('',(123.041422,-151.9,1.51)); +#248494 = VECTOR('',#248495,1.); +#248495 = DIRECTION('',(0.,0.,1.)); +#248496 = ORIENTED_EDGE('',*,*,#248497,.F.); +#248497 = EDGE_CURVE('',#248459,#248490,#248498,.T.); +#248498 = LINE('',#248499,#248500); +#248499 = CARTESIAN_POINT('',(120.9,-149.758578,1.51)); +#248500 = VECTOR('',#248501,1.); +#248501 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248502 = PLANE('',#248503); +#248503 = AXIS2_PLACEMENT_3D('',#248504,#248505,#248506); +#248504 = CARTESIAN_POINT('',(120.9,-149.758578,1.51)); +#248505 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#248506 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248507 = ADVANCED_FACE('',(#248508),#248533,.T.); +#248508 = FACE_BOUND('',#248509,.T.); +#248509 = EDGE_LOOP('',(#248510,#248511,#248519,#248527)); +#248510 = ORIENTED_EDGE('',*,*,#248489,.T.); +#248511 = ORIENTED_EDGE('',*,*,#248512,.T.); +#248512 = EDGE_CURVE('',#248482,#248513,#248515,.T.); +#248513 = VERTEX_POINT('',#248514); +#248514 = CARTESIAN_POINT('',(126.519509,-151.901921,1.545)); +#248515 = LINE('',#248516,#248517); +#248516 = CARTESIAN_POINT('',(123.041422,-151.9,1.545)); +#248517 = VECTOR('',#248518,1.); +#248518 = DIRECTION('',(0.999999847474,-5.523150246038E-04,0.)); +#248519 = ORIENTED_EDGE('',*,*,#248520,.F.); +#248520 = EDGE_CURVE('',#248521,#248513,#248523,.T.); +#248521 = VERTEX_POINT('',#248522); +#248522 = CARTESIAN_POINT('',(126.519509,-151.901921,1.51)); +#248523 = LINE('',#248524,#248525); +#248524 = CARTESIAN_POINT('',(126.519509,-151.901921,1.51)); +#248525 = VECTOR('',#248526,1.); +#248526 = DIRECTION('',(0.,0.,1.)); +#248527 = ORIENTED_EDGE('',*,*,#248528,.F.); +#248528 = EDGE_CURVE('',#248490,#248521,#248529,.T.); +#248529 = LINE('',#248530,#248531); +#248530 = CARTESIAN_POINT('',(123.041422,-151.9,1.51)); +#248531 = VECTOR('',#248532,1.); +#248532 = DIRECTION('',(0.999999847474,-5.523150246038E-04,0.)); +#248533 = PLANE('',#248534); +#248534 = AXIS2_PLACEMENT_3D('',#248535,#248536,#248537); +#248535 = CARTESIAN_POINT('',(123.041422,-151.9,1.51)); +#248536 = DIRECTION('',(5.523150246038E-04,0.999999847474,-0.)); +#248537 = DIRECTION('',(0.999999847474,-5.523150246038E-04,0.)); +#248538 = ADVANCED_FACE('',(#248539),#248564,.T.); +#248539 = FACE_BOUND('',#248540,.T.); +#248540 = EDGE_LOOP('',(#248541,#248542,#248550,#248558)); +#248541 = ORIENTED_EDGE('',*,*,#248520,.T.); +#248542 = ORIENTED_EDGE('',*,*,#248543,.T.); +#248543 = EDGE_CURVE('',#248513,#248544,#248546,.T.); +#248544 = VERTEX_POINT('',#248545); +#248545 = CARTESIAN_POINT('',(126.555557,-151.916853,1.545)); +#248546 = LINE('',#248547,#248548); +#248547 = CARTESIAN_POINT('',(126.519509,-151.901921,1.545)); +#248548 = VECTOR('',#248549,1.); +#248549 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#248550 = ORIENTED_EDGE('',*,*,#248551,.F.); +#248551 = EDGE_CURVE('',#248552,#248544,#248554,.T.); +#248552 = VERTEX_POINT('',#248553); +#248553 = CARTESIAN_POINT('',(126.555557,-151.916853,1.51)); +#248554 = LINE('',#248555,#248556); +#248555 = CARTESIAN_POINT('',(126.555557,-151.916853,1.51)); +#248556 = VECTOR('',#248557,1.); +#248557 = DIRECTION('',(0.,0.,1.)); +#248558 = ORIENTED_EDGE('',*,*,#248559,.F.); +#248559 = EDGE_CURVE('',#248521,#248552,#248560,.T.); +#248560 = LINE('',#248561,#248562); +#248561 = CARTESIAN_POINT('',(126.519509,-151.901921,1.51)); +#248562 = VECTOR('',#248563,1.); +#248563 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#248564 = PLANE('',#248565); +#248565 = AXIS2_PLACEMENT_3D('',#248566,#248567,#248568); +#248566 = CARTESIAN_POINT('',(126.519509,-151.901921,1.51)); +#248567 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#248568 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#248569 = ADVANCED_FACE('',(#248570),#248595,.T.); +#248570 = FACE_BOUND('',#248571,.T.); +#248571 = EDGE_LOOP('',(#248572,#248573,#248581,#248589)); +#248572 = ORIENTED_EDGE('',*,*,#248551,.T.); +#248573 = ORIENTED_EDGE('',*,*,#248574,.T.); +#248574 = EDGE_CURVE('',#248544,#248575,#248577,.T.); +#248575 = VERTEX_POINT('',#248576); +#248576 = CARTESIAN_POINT('',(127.833147,-153.194443,1.545)); +#248577 = LINE('',#248578,#248579); +#248578 = CARTESIAN_POINT('',(126.555557,-151.916853,1.545)); +#248579 = VECTOR('',#248580,1.); +#248580 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248581 = ORIENTED_EDGE('',*,*,#248582,.F.); +#248582 = EDGE_CURVE('',#248583,#248575,#248585,.T.); +#248583 = VERTEX_POINT('',#248584); +#248584 = CARTESIAN_POINT('',(127.833147,-153.194443,1.51)); +#248585 = LINE('',#248586,#248587); +#248586 = CARTESIAN_POINT('',(127.833147,-153.194443,1.51)); +#248587 = VECTOR('',#248588,1.); +#248588 = DIRECTION('',(0.,0.,1.)); +#248589 = ORIENTED_EDGE('',*,*,#248590,.F.); +#248590 = EDGE_CURVE('',#248552,#248583,#248591,.T.); +#248591 = LINE('',#248592,#248593); +#248592 = CARTESIAN_POINT('',(126.555557,-151.916853,1.51)); +#248593 = VECTOR('',#248594,1.); +#248594 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248595 = PLANE('',#248596); +#248596 = AXIS2_PLACEMENT_3D('',#248597,#248598,#248599); +#248597 = CARTESIAN_POINT('',(126.555557,-151.916853,1.51)); +#248598 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#248599 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#248600 = ADVANCED_FACE('',(#248601),#248628,.T.); +#248601 = FACE_BOUND('',#248602,.T.); +#248602 = EDGE_LOOP('',(#248603,#248604,#248613,#248621)); +#248603 = ORIENTED_EDGE('',*,*,#248582,.T.); +#248604 = ORIENTED_EDGE('',*,*,#248605,.T.); +#248605 = EDGE_CURVE('',#248575,#248606,#248608,.T.); +#248606 = VERTEX_POINT('',#248607); +#248607 = CARTESIAN_POINT('',(127.694443,-153.333147,1.545)); +#248608 = CIRCLE('',#248609,0.10000001929); +#248609 = AXIS2_PLACEMENT_3D('',#248610,#248611,#248612); +#248610 = CARTESIAN_POINT('',(127.75,-153.25,1.545)); +#248611 = DIRECTION('',(0.,0.,-1.)); +#248612 = DIRECTION('',(0.83146983961,0.555569892831,0.)); +#248613 = ORIENTED_EDGE('',*,*,#248614,.F.); +#248614 = EDGE_CURVE('',#248615,#248606,#248617,.T.); +#248615 = VERTEX_POINT('',#248616); +#248616 = CARTESIAN_POINT('',(127.694443,-153.333147,1.51)); +#248617 = LINE('',#248618,#248619); +#248618 = CARTESIAN_POINT('',(127.694443,-153.333147,1.51)); +#248619 = VECTOR('',#248620,1.); +#248620 = DIRECTION('',(0.,0.,1.)); +#248621 = ORIENTED_EDGE('',*,*,#248622,.F.); +#248622 = EDGE_CURVE('',#248583,#248615,#248623,.T.); +#248623 = CIRCLE('',#248624,0.10000001929); +#248624 = AXIS2_PLACEMENT_3D('',#248625,#248626,#248627); +#248625 = CARTESIAN_POINT('',(127.75,-153.25,1.51)); +#248626 = DIRECTION('',(0.,0.,-1.)); +#248627 = DIRECTION('',(0.83146983961,0.555569892831,0.)); +#248628 = CYLINDRICAL_SURFACE('',#248629,0.10000001929); +#248629 = AXIS2_PLACEMENT_3D('',#248630,#248631,#248632); +#248630 = CARTESIAN_POINT('',(127.75,-153.25,1.51)); +#248631 = DIRECTION('',(0.,0.,-1.)); +#248632 = DIRECTION('',(0.83146983961,0.555569892831,0.)); +#248633 = ADVANCED_FACE('',(#248634),#248659,.T.); +#248634 = FACE_BOUND('',#248635,.T.); +#248635 = EDGE_LOOP('',(#248636,#248637,#248645,#248653)); +#248636 = ORIENTED_EDGE('',*,*,#248614,.T.); +#248637 = ORIENTED_EDGE('',*,*,#248638,.T.); +#248638 = EDGE_CURVE('',#248606,#248639,#248641,.T.); +#248639 = VERTEX_POINT('',#248640); +#248640 = CARTESIAN_POINT('',(126.458578,-152.1,1.545)); +#248641 = LINE('',#248642,#248643); +#248642 = CARTESIAN_POINT('',(127.694443,-153.333147,1.545)); +#248643 = VECTOR('',#248644,1.); +#248644 = DIRECTION('',(-0.707884767361,0.706327938098,0.)); +#248645 = ORIENTED_EDGE('',*,*,#248646,.F.); +#248646 = EDGE_CURVE('',#248647,#248639,#248649,.T.); +#248647 = VERTEX_POINT('',#248648); +#248648 = CARTESIAN_POINT('',(126.458578,-152.1,1.51)); +#248649 = LINE('',#248650,#248651); +#248650 = CARTESIAN_POINT('',(126.458578,-152.1,1.51)); +#248651 = VECTOR('',#248652,1.); +#248652 = DIRECTION('',(0.,0.,1.)); +#248653 = ORIENTED_EDGE('',*,*,#248654,.F.); +#248654 = EDGE_CURVE('',#248615,#248647,#248655,.T.); +#248655 = LINE('',#248656,#248657); +#248656 = CARTESIAN_POINT('',(127.694443,-153.333147,1.51)); +#248657 = VECTOR('',#248658,1.); +#248658 = DIRECTION('',(-0.707884767361,0.706327938098,0.)); +#248659 = PLANE('',#248660); +#248660 = AXIS2_PLACEMENT_3D('',#248661,#248662,#248663); +#248661 = CARTESIAN_POINT('',(127.694443,-153.333147,1.51)); +#248662 = DIRECTION('',(-0.706327938098,-0.707884767361,0.)); +#248663 = DIRECTION('',(-0.707884767361,0.706327938098,0.)); +#248664 = ADVANCED_FACE('',(#248665),#248690,.T.); +#248665 = FACE_BOUND('',#248666,.T.); +#248666 = EDGE_LOOP('',(#248667,#248668,#248676,#248684)); +#248667 = ORIENTED_EDGE('',*,*,#248646,.T.); +#248668 = ORIENTED_EDGE('',*,*,#248669,.T.); +#248669 = EDGE_CURVE('',#248639,#248670,#248672,.T.); +#248670 = VERTEX_POINT('',#248671); +#248671 = CARTESIAN_POINT('',(122.980491,-152.098079,1.545)); +#248672 = LINE('',#248673,#248674); +#248673 = CARTESIAN_POINT('',(126.458578,-152.1,1.545)); +#248674 = VECTOR('',#248675,1.); +#248675 = DIRECTION('',(-0.999999847474,5.523150246038E-04,0.)); +#248676 = ORIENTED_EDGE('',*,*,#248677,.F.); +#248677 = EDGE_CURVE('',#248678,#248670,#248680,.T.); +#248678 = VERTEX_POINT('',#248679); +#248679 = CARTESIAN_POINT('',(122.980491,-152.098079,1.51)); +#248680 = LINE('',#248681,#248682); +#248681 = CARTESIAN_POINT('',(122.980491,-152.098079,1.51)); +#248682 = VECTOR('',#248683,1.); +#248683 = DIRECTION('',(0.,0.,1.)); +#248684 = ORIENTED_EDGE('',*,*,#248685,.F.); +#248685 = EDGE_CURVE('',#248647,#248678,#248686,.T.); +#248686 = LINE('',#248687,#248688); +#248687 = CARTESIAN_POINT('',(126.458578,-152.1,1.51)); +#248688 = VECTOR('',#248689,1.); +#248689 = DIRECTION('',(-0.999999847474,5.523150246038E-04,0.)); +#248690 = PLANE('',#248691); +#248691 = AXIS2_PLACEMENT_3D('',#248692,#248693,#248694); +#248692 = CARTESIAN_POINT('',(126.458578,-152.1,1.51)); +#248693 = DIRECTION('',(-5.523150246038E-04,-0.999999847474,0.)); +#248694 = DIRECTION('',(-0.999999847474,5.523150246038E-04,0.)); +#248695 = ADVANCED_FACE('',(#248696),#248721,.T.); +#248696 = FACE_BOUND('',#248697,.T.); +#248697 = EDGE_LOOP('',(#248698,#248699,#248707,#248715)); +#248698 = ORIENTED_EDGE('',*,*,#248677,.T.); +#248699 = ORIENTED_EDGE('',*,*,#248700,.T.); +#248700 = EDGE_CURVE('',#248670,#248701,#248703,.T.); +#248701 = VERTEX_POINT('',#248702); +#248702 = CARTESIAN_POINT('',(122.944443,-152.083147,1.545)); +#248703 = LINE('',#248704,#248705); +#248704 = CARTESIAN_POINT('',(122.980491,-152.098079,1.545)); +#248705 = VECTOR('',#248706,1.); +#248706 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#248707 = ORIENTED_EDGE('',*,*,#248708,.F.); +#248708 = EDGE_CURVE('',#248709,#248701,#248711,.T.); +#248709 = VERTEX_POINT('',#248710); +#248710 = CARTESIAN_POINT('',(122.944443,-152.083147,1.51)); +#248711 = LINE('',#248712,#248713); +#248712 = CARTESIAN_POINT('',(122.944443,-152.083147,1.51)); +#248713 = VECTOR('',#248714,1.); +#248714 = DIRECTION('',(0.,0.,1.)); +#248715 = ORIENTED_EDGE('',*,*,#248716,.F.); +#248716 = EDGE_CURVE('',#248678,#248709,#248717,.T.); +#248717 = LINE('',#248718,#248719); +#248718 = CARTESIAN_POINT('',(122.980491,-152.098079,1.51)); +#248719 = VECTOR('',#248720,1.); +#248720 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#248721 = PLANE('',#248722); +#248722 = AXIS2_PLACEMENT_3D('',#248723,#248724,#248725); +#248723 = CARTESIAN_POINT('',(122.980491,-152.098079,1.51)); +#248724 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#248725 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#248726 = ADVANCED_FACE('',(#248727),#248752,.T.); +#248727 = FACE_BOUND('',#248728,.T.); +#248728 = EDGE_LOOP('',(#248729,#248730,#248738,#248746)); +#248729 = ORIENTED_EDGE('',*,*,#248708,.T.); +#248730 = ORIENTED_EDGE('',*,*,#248731,.T.); +#248731 = EDGE_CURVE('',#248701,#248732,#248734,.T.); +#248732 = VERTEX_POINT('',#248733); +#248733 = CARTESIAN_POINT('',(120.716853,-149.855557,1.545)); +#248734 = LINE('',#248735,#248736); +#248735 = CARTESIAN_POINT('',(122.944443,-152.083147,1.545)); +#248736 = VECTOR('',#248737,1.); +#248737 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#248738 = ORIENTED_EDGE('',*,*,#248739,.F.); +#248739 = EDGE_CURVE('',#248740,#248732,#248742,.T.); +#248740 = VERTEX_POINT('',#248741); +#248741 = CARTESIAN_POINT('',(120.716853,-149.855557,1.51)); +#248742 = LINE('',#248743,#248744); +#248743 = CARTESIAN_POINT('',(120.716853,-149.855557,1.51)); +#248744 = VECTOR('',#248745,1.); +#248745 = DIRECTION('',(0.,0.,1.)); +#248746 = ORIENTED_EDGE('',*,*,#248747,.F.); +#248747 = EDGE_CURVE('',#248709,#248740,#248748,.T.); +#248748 = LINE('',#248749,#248750); +#248749 = CARTESIAN_POINT('',(122.944443,-152.083147,1.51)); +#248750 = VECTOR('',#248751,1.); +#248751 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#248752 = PLANE('',#248753); +#248753 = AXIS2_PLACEMENT_3D('',#248754,#248755,#248756); +#248754 = CARTESIAN_POINT('',(122.944443,-152.083147,1.51)); +#248755 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#248756 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#248757 = ADVANCED_FACE('',(#248758),#248783,.T.); +#248758 = FACE_BOUND('',#248759,.T.); +#248759 = EDGE_LOOP('',(#248760,#248761,#248769,#248777)); +#248760 = ORIENTED_EDGE('',*,*,#248739,.T.); +#248761 = ORIENTED_EDGE('',*,*,#248762,.T.); +#248762 = EDGE_CURVE('',#248732,#248763,#248765,.T.); +#248763 = VERTEX_POINT('',#248764); +#248764 = CARTESIAN_POINT('',(120.701921,-149.819509,1.545)); +#248765 = LINE('',#248766,#248767); +#248766 = CARTESIAN_POINT('',(120.716853,-149.855557,1.545)); +#248767 = VECTOR('',#248768,1.); +#248768 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248769 = ORIENTED_EDGE('',*,*,#248770,.F.); +#248770 = EDGE_CURVE('',#248771,#248763,#248773,.T.); +#248771 = VERTEX_POINT('',#248772); +#248772 = CARTESIAN_POINT('',(120.701921,-149.819509,1.51)); +#248773 = LINE('',#248774,#248775); +#248774 = CARTESIAN_POINT('',(120.701921,-149.819509,1.51)); +#248775 = VECTOR('',#248776,1.); +#248776 = DIRECTION('',(0.,0.,1.)); +#248777 = ORIENTED_EDGE('',*,*,#248778,.F.); +#248778 = EDGE_CURVE('',#248740,#248771,#248779,.T.); +#248779 = LINE('',#248780,#248781); +#248780 = CARTESIAN_POINT('',(120.716853,-149.855557,1.51)); +#248781 = VECTOR('',#248782,1.); +#248782 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248783 = PLANE('',#248784); +#248784 = AXIS2_PLACEMENT_3D('',#248785,#248786,#248787); +#248785 = CARTESIAN_POINT('',(120.716853,-149.855557,1.51)); +#248786 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#248787 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248788 = ADVANCED_FACE('',(#248789),#248814,.T.); +#248789 = FACE_BOUND('',#248790,.T.); +#248790 = EDGE_LOOP('',(#248791,#248792,#248800,#248808)); +#248791 = ORIENTED_EDGE('',*,*,#248770,.T.); +#248792 = ORIENTED_EDGE('',*,*,#248793,.T.); +#248793 = EDGE_CURVE('',#248763,#248794,#248796,.T.); +#248794 = VERTEX_POINT('',#248795); +#248795 = CARTESIAN_POINT('',(120.701921,-112.580491,1.545)); +#248796 = LINE('',#248797,#248798); +#248797 = CARTESIAN_POINT('',(120.701921,-149.819509,1.545)); +#248798 = VECTOR('',#248799,1.); +#248799 = DIRECTION('',(0.,1.,0.)); +#248800 = ORIENTED_EDGE('',*,*,#248801,.F.); +#248801 = EDGE_CURVE('',#248802,#248794,#248804,.T.); +#248802 = VERTEX_POINT('',#248803); +#248803 = CARTESIAN_POINT('',(120.701921,-112.580491,1.51)); +#248804 = LINE('',#248805,#248806); +#248805 = CARTESIAN_POINT('',(120.701921,-112.580491,1.51)); +#248806 = VECTOR('',#248807,1.); +#248807 = DIRECTION('',(0.,0.,1.)); +#248808 = ORIENTED_EDGE('',*,*,#248809,.F.); +#248809 = EDGE_CURVE('',#248771,#248802,#248810,.T.); +#248810 = LINE('',#248811,#248812); +#248811 = CARTESIAN_POINT('',(120.701921,-149.819509,1.51)); +#248812 = VECTOR('',#248813,1.); +#248813 = DIRECTION('',(0.,1.,0.)); +#248814 = PLANE('',#248815); +#248815 = AXIS2_PLACEMENT_3D('',#248816,#248817,#248818); +#248816 = CARTESIAN_POINT('',(120.701921,-149.819509,1.51)); +#248817 = DIRECTION('',(-1.,0.,0.)); +#248818 = DIRECTION('',(0.,1.,0.)); +#248819 = ADVANCED_FACE('',(#248820),#248847,.T.); +#248820 = FACE_BOUND('',#248821,.T.); +#248821 = EDGE_LOOP('',(#248822,#248823,#248832,#248840)); +#248822 = ORIENTED_EDGE('',*,*,#248801,.T.); +#248823 = ORIENTED_EDGE('',*,*,#248824,.T.); +#248824 = EDGE_CURVE('',#248794,#248825,#248827,.T.); +#248825 = VERTEX_POINT('',#248826); +#248826 = CARTESIAN_POINT('',(120.780491,-112.501921,1.545)); +#248827 = CIRCLE('',#248828,0.100002891901); +#248828 = AXIS2_PLACEMENT_3D('',#248829,#248830,#248831); +#248829 = CARTESIAN_POINT('',(120.80000207103,-112.600002071,1.545)); +#248830 = DIRECTION('',(0.,0.,-1.)); +#248831 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#248832 = ORIENTED_EDGE('',*,*,#248833,.F.); +#248833 = EDGE_CURVE('',#248834,#248825,#248836,.T.); +#248834 = VERTEX_POINT('',#248835); +#248835 = CARTESIAN_POINT('',(120.780491,-112.501921,1.51)); +#248836 = LINE('',#248837,#248838); +#248837 = CARTESIAN_POINT('',(120.780491,-112.501921,1.51)); +#248838 = VECTOR('',#248839,1.); +#248839 = DIRECTION('',(0.,0.,1.)); +#248840 = ORIENTED_EDGE('',*,*,#248841,.F.); +#248841 = EDGE_CURVE('',#248802,#248834,#248842,.T.); +#248842 = CIRCLE('',#248843,0.100002891901); +#248843 = AXIS2_PLACEMENT_3D('',#248844,#248845,#248846); +#248844 = CARTESIAN_POINT('',(120.80000207103,-112.600002071,1.51)); +#248845 = DIRECTION('',(0.,0.,-1.)); +#248846 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#248847 = CYLINDRICAL_SURFACE('',#248848,0.100002891901); +#248848 = AXIS2_PLACEMENT_3D('',#248849,#248850,#248851); +#248849 = CARTESIAN_POINT('',(120.80000207103,-112.600002071,1.51)); +#248850 = DIRECTION('',(0.,0.,-1.)); +#248851 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#248852 = ADVANCED_FACE('',(#248853),#248878,.T.); +#248853 = FACE_BOUND('',#248854,.T.); +#248854 = EDGE_LOOP('',(#248855,#248856,#248864,#248872)); +#248855 = ORIENTED_EDGE('',*,*,#248833,.T.); +#248856 = ORIENTED_EDGE('',*,*,#248857,.T.); +#248857 = EDGE_CURVE('',#248825,#248858,#248860,.T.); +#248858 = VERTEX_POINT('',#248859); +#248859 = CARTESIAN_POINT('',(121.010049,-112.5,1.545)); +#248860 = LINE('',#248861,#248862); +#248861 = CARTESIAN_POINT('',(120.780491,-112.501921,1.545)); +#248862 = VECTOR('',#248863,1.); +#248863 = DIRECTION('',(0.999964987989,8.367962527649E-03,0.)); +#248864 = ORIENTED_EDGE('',*,*,#248865,.F.); +#248865 = EDGE_CURVE('',#248866,#248858,#248868,.T.); +#248866 = VERTEX_POINT('',#248867); +#248867 = CARTESIAN_POINT('',(121.010049,-112.5,1.51)); +#248868 = LINE('',#248869,#248870); +#248869 = CARTESIAN_POINT('',(121.010049,-112.5,1.51)); +#248870 = VECTOR('',#248871,1.); +#248871 = DIRECTION('',(0.,0.,1.)); +#248872 = ORIENTED_EDGE('',*,*,#248873,.F.); +#248873 = EDGE_CURVE('',#248834,#248866,#248874,.T.); +#248874 = LINE('',#248875,#248876); +#248875 = CARTESIAN_POINT('',(120.780491,-112.501921,1.51)); +#248876 = VECTOR('',#248877,1.); +#248877 = DIRECTION('',(0.999964987989,8.367962527649E-03,0.)); +#248878 = PLANE('',#248879); +#248879 = AXIS2_PLACEMENT_3D('',#248880,#248881,#248882); +#248880 = CARTESIAN_POINT('',(120.780491,-112.501921,1.51)); +#248881 = DIRECTION('',(-8.367962527649E-03,0.999964987989,0.)); +#248882 = DIRECTION('',(0.999964987989,8.367962527649E-03,0.)); +#248883 = ADVANCED_FACE('',(#248884),#248909,.T.); +#248884 = FACE_BOUND('',#248885,.T.); +#248885 = EDGE_LOOP('',(#248886,#248887,#248895,#248903)); +#248886 = ORIENTED_EDGE('',*,*,#248865,.T.); +#248887 = ORIENTED_EDGE('',*,*,#248888,.T.); +#248888 = EDGE_CURVE('',#248858,#248889,#248891,.T.); +#248889 = VERTEX_POINT('',#248890); +#248890 = CARTESIAN_POINT('',(120.816853,-112.304086,1.545)); +#248891 = LINE('',#248892,#248893); +#248892 = CARTESIAN_POINT('',(121.010049,-112.5,1.545)); +#248893 = VECTOR('',#248894,1.); +#248894 = DIRECTION('',(-0.702150389532,0.712028672513,0.)); +#248895 = ORIENTED_EDGE('',*,*,#248896,.F.); +#248896 = EDGE_CURVE('',#248897,#248889,#248899,.T.); +#248897 = VERTEX_POINT('',#248898); +#248898 = CARTESIAN_POINT('',(120.816853,-112.304086,1.51)); +#248899 = LINE('',#248900,#248901); +#248900 = CARTESIAN_POINT('',(120.816853,-112.304086,1.51)); +#248901 = VECTOR('',#248902,1.); +#248902 = DIRECTION('',(0.,0.,1.)); +#248903 = ORIENTED_EDGE('',*,*,#248904,.F.); +#248904 = EDGE_CURVE('',#248866,#248897,#248905,.T.); +#248905 = LINE('',#248906,#248907); +#248906 = CARTESIAN_POINT('',(121.010049,-112.5,1.51)); +#248907 = VECTOR('',#248908,1.); +#248908 = DIRECTION('',(-0.702150389532,0.712028672513,0.)); +#248909 = PLANE('',#248910); +#248910 = AXIS2_PLACEMENT_3D('',#248911,#248912,#248913); +#248911 = CARTESIAN_POINT('',(121.010049,-112.5,1.51)); +#248912 = DIRECTION('',(-0.712028672513,-0.702150389532,0.)); +#248913 = DIRECTION('',(-0.702150389532,0.712028672513,0.)); +#248914 = ADVANCED_FACE('',(#248915),#248940,.T.); +#248915 = FACE_BOUND('',#248916,.T.); +#248916 = EDGE_LOOP('',(#248917,#248918,#248926,#248934)); +#248917 = ORIENTED_EDGE('',*,*,#248896,.T.); +#248918 = ORIENTED_EDGE('',*,*,#248919,.T.); +#248919 = EDGE_CURVE('',#248889,#248920,#248922,.T.); +#248920 = VERTEX_POINT('',#248921); +#248921 = CARTESIAN_POINT('',(120.801921,-112.268038,1.545)); +#248922 = LINE('',#248923,#248924); +#248923 = CARTESIAN_POINT('',(120.816853,-112.304086,1.545)); +#248924 = VECTOR('',#248925,1.); +#248925 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248926 = ORIENTED_EDGE('',*,*,#248927,.F.); +#248927 = EDGE_CURVE('',#248928,#248920,#248930,.T.); +#248928 = VERTEX_POINT('',#248929); +#248929 = CARTESIAN_POINT('',(120.801921,-112.268038,1.51)); +#248930 = LINE('',#248931,#248932); +#248931 = CARTESIAN_POINT('',(120.801921,-112.268038,1.51)); +#248932 = VECTOR('',#248933,1.); +#248933 = DIRECTION('',(0.,0.,1.)); +#248934 = ORIENTED_EDGE('',*,*,#248935,.F.); +#248935 = EDGE_CURVE('',#248897,#248928,#248936,.T.); +#248936 = LINE('',#248937,#248938); +#248937 = CARTESIAN_POINT('',(120.816853,-112.304086,1.51)); +#248938 = VECTOR('',#248939,1.); +#248939 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248940 = PLANE('',#248941); +#248941 = AXIS2_PLACEMENT_3D('',#248942,#248943,#248944); +#248942 = CARTESIAN_POINT('',(120.816853,-112.304086,1.51)); +#248943 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#248944 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#248945 = ADVANCED_FACE('',(#248946),#248971,.T.); +#248946 = FACE_BOUND('',#248947,.T.); +#248947 = EDGE_LOOP('',(#248948,#248949,#248957,#248965)); +#248948 = ORIENTED_EDGE('',*,*,#248927,.T.); +#248949 = ORIENTED_EDGE('',*,*,#248950,.T.); +#248950 = EDGE_CURVE('',#248920,#248951,#248953,.T.); +#248951 = VERTEX_POINT('',#248952); +#248952 = CARTESIAN_POINT('',(120.801921,-111.731962,1.545)); +#248953 = LINE('',#248954,#248955); +#248954 = CARTESIAN_POINT('',(120.801921,-112.268038,1.545)); +#248955 = VECTOR('',#248956,1.); +#248956 = DIRECTION('',(0.,1.,0.)); +#248957 = ORIENTED_EDGE('',*,*,#248958,.F.); +#248958 = EDGE_CURVE('',#248959,#248951,#248961,.T.); +#248959 = VERTEX_POINT('',#248960); +#248960 = CARTESIAN_POINT('',(120.801921,-111.731962,1.51)); +#248961 = LINE('',#248962,#248963); +#248962 = CARTESIAN_POINT('',(120.801921,-111.731962,1.51)); +#248963 = VECTOR('',#248964,1.); +#248964 = DIRECTION('',(0.,0.,1.)); +#248965 = ORIENTED_EDGE('',*,*,#248966,.F.); +#248966 = EDGE_CURVE('',#248928,#248959,#248967,.T.); +#248967 = LINE('',#248968,#248969); +#248968 = CARTESIAN_POINT('',(120.801921,-112.268038,1.51)); +#248969 = VECTOR('',#248970,1.); +#248970 = DIRECTION('',(0.,1.,0.)); +#248971 = PLANE('',#248972); +#248972 = AXIS2_PLACEMENT_3D('',#248973,#248974,#248975); +#248973 = CARTESIAN_POINT('',(120.801921,-112.268038,1.51)); +#248974 = DIRECTION('',(-1.,0.,0.)); +#248975 = DIRECTION('',(0.,1.,0.)); +#248976 = ADVANCED_FACE('',(#248977),#249002,.T.); +#248977 = FACE_BOUND('',#248978,.T.); +#248978 = EDGE_LOOP('',(#248979,#248980,#248988,#248996)); +#248979 = ORIENTED_EDGE('',*,*,#248958,.T.); +#248980 = ORIENTED_EDGE('',*,*,#248981,.T.); +#248981 = EDGE_CURVE('',#248951,#248982,#248984,.T.); +#248982 = VERTEX_POINT('',#248983); +#248983 = CARTESIAN_POINT('',(120.816853,-111.695914,1.545)); +#248984 = LINE('',#248985,#248986); +#248985 = CARTESIAN_POINT('',(120.801921,-111.731962,1.545)); +#248986 = VECTOR('',#248987,1.); +#248987 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#248988 = ORIENTED_EDGE('',*,*,#248989,.F.); +#248989 = EDGE_CURVE('',#248990,#248982,#248992,.T.); +#248990 = VERTEX_POINT('',#248991); +#248991 = CARTESIAN_POINT('',(120.816853,-111.695914,1.51)); +#248992 = LINE('',#248993,#248994); +#248993 = CARTESIAN_POINT('',(120.816853,-111.695914,1.51)); +#248994 = VECTOR('',#248995,1.); +#248995 = DIRECTION('',(0.,0.,1.)); +#248996 = ORIENTED_EDGE('',*,*,#248997,.F.); +#248997 = EDGE_CURVE('',#248959,#248990,#248998,.T.); +#248998 = LINE('',#248999,#249000); +#248999 = CARTESIAN_POINT('',(120.801921,-111.731962,1.51)); +#249000 = VECTOR('',#249001,1.); +#249001 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249002 = PLANE('',#249003); +#249003 = AXIS2_PLACEMENT_3D('',#249004,#249005,#249006); +#249004 = CARTESIAN_POINT('',(120.801921,-111.731962,1.51)); +#249005 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#249006 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249007 = ADVANCED_FACE('',(#249008),#249033,.T.); +#249008 = FACE_BOUND('',#249009,.T.); +#249009 = EDGE_LOOP('',(#249010,#249011,#249019,#249027)); +#249010 = ORIENTED_EDGE('',*,*,#248989,.T.); +#249011 = ORIENTED_EDGE('',*,*,#249012,.T.); +#249012 = EDGE_CURVE('',#248982,#249013,#249015,.T.); +#249013 = VERTEX_POINT('',#249014); +#249014 = CARTESIAN_POINT('',(121.195914,-111.316853,1.545)); +#249015 = LINE('',#249016,#249017); +#249016 = CARTESIAN_POINT('',(120.816853,-111.695914,1.545)); +#249017 = VECTOR('',#249018,1.); +#249018 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#249019 = ORIENTED_EDGE('',*,*,#249020,.F.); +#249020 = EDGE_CURVE('',#249021,#249013,#249023,.T.); +#249021 = VERTEX_POINT('',#249022); +#249022 = CARTESIAN_POINT('',(121.195914,-111.316853,1.51)); +#249023 = LINE('',#249024,#249025); +#249024 = CARTESIAN_POINT('',(121.195914,-111.316853,1.51)); +#249025 = VECTOR('',#249026,1.); +#249026 = DIRECTION('',(0.,0.,1.)); +#249027 = ORIENTED_EDGE('',*,*,#249028,.F.); +#249028 = EDGE_CURVE('',#248990,#249021,#249029,.T.); +#249029 = LINE('',#249030,#249031); +#249030 = CARTESIAN_POINT('',(120.816853,-111.695914,1.51)); +#249031 = VECTOR('',#249032,1.); +#249032 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#249033 = PLANE('',#249034); +#249034 = AXIS2_PLACEMENT_3D('',#249035,#249036,#249037); +#249035 = CARTESIAN_POINT('',(120.816853,-111.695914,1.51)); +#249036 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#249037 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#249038 = ADVANCED_FACE('',(#249039),#249064,.T.); +#249039 = FACE_BOUND('',#249040,.T.); +#249040 = EDGE_LOOP('',(#249041,#249042,#249050,#249058)); +#249041 = ORIENTED_EDGE('',*,*,#249020,.T.); +#249042 = ORIENTED_EDGE('',*,*,#249043,.T.); +#249043 = EDGE_CURVE('',#249013,#249044,#249046,.T.); +#249044 = VERTEX_POINT('',#249045); +#249045 = CARTESIAN_POINT('',(121.231962,-111.301921,1.545)); +#249046 = LINE('',#249047,#249048); +#249047 = CARTESIAN_POINT('',(121.195914,-111.316853,1.545)); +#249048 = VECTOR('',#249049,1.); +#249049 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249050 = ORIENTED_EDGE('',*,*,#249051,.F.); +#249051 = EDGE_CURVE('',#249052,#249044,#249054,.T.); +#249052 = VERTEX_POINT('',#249053); +#249053 = CARTESIAN_POINT('',(121.231962,-111.301921,1.51)); +#249054 = LINE('',#249055,#249056); +#249055 = CARTESIAN_POINT('',(121.231962,-111.301921,1.51)); +#249056 = VECTOR('',#249057,1.); +#249057 = DIRECTION('',(0.,0.,1.)); +#249058 = ORIENTED_EDGE('',*,*,#249059,.F.); +#249059 = EDGE_CURVE('',#249021,#249052,#249060,.T.); +#249060 = LINE('',#249061,#249062); +#249061 = CARTESIAN_POINT('',(121.195914,-111.316853,1.51)); +#249062 = VECTOR('',#249063,1.); +#249063 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249064 = PLANE('',#249065); +#249065 = AXIS2_PLACEMENT_3D('',#249066,#249067,#249068); +#249066 = CARTESIAN_POINT('',(121.195914,-111.316853,1.51)); +#249067 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#249068 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249069 = ADVANCED_FACE('',(#249070),#249095,.T.); +#249070 = FACE_BOUND('',#249071,.T.); +#249071 = EDGE_LOOP('',(#249072,#249073,#249081,#249089)); +#249072 = ORIENTED_EDGE('',*,*,#249051,.T.); +#249073 = ORIENTED_EDGE('',*,*,#249074,.T.); +#249074 = EDGE_CURVE('',#249044,#249075,#249077,.T.); +#249075 = VERTEX_POINT('',#249076); +#249076 = CARTESIAN_POINT('',(121.4,-111.3,1.545)); +#249077 = LINE('',#249078,#249079); +#249078 = CARTESIAN_POINT('',(121.231962,-111.301921,1.545)); +#249079 = VECTOR('',#249080,1.); +#249080 = DIRECTION('',(0.999934661801,1.143119107175E-02,0.)); +#249081 = ORIENTED_EDGE('',*,*,#249082,.F.); +#249082 = EDGE_CURVE('',#249083,#249075,#249085,.T.); +#249083 = VERTEX_POINT('',#249084); +#249084 = CARTESIAN_POINT('',(121.4,-111.3,1.51)); +#249085 = LINE('',#249086,#249087); +#249086 = CARTESIAN_POINT('',(121.4,-111.3,1.51)); +#249087 = VECTOR('',#249088,1.); +#249088 = DIRECTION('',(0.,0.,1.)); +#249089 = ORIENTED_EDGE('',*,*,#249090,.F.); +#249090 = EDGE_CURVE('',#249052,#249083,#249091,.T.); +#249091 = LINE('',#249092,#249093); +#249092 = CARTESIAN_POINT('',(121.231962,-111.301921,1.51)); +#249093 = VECTOR('',#249094,1.); +#249094 = DIRECTION('',(0.999934661801,1.143119107175E-02,0.)); +#249095 = PLANE('',#249096); +#249096 = AXIS2_PLACEMENT_3D('',#249097,#249098,#249099); +#249097 = CARTESIAN_POINT('',(121.231962,-111.301921,1.51)); +#249098 = DIRECTION('',(-1.143119107175E-02,0.999934661801,0.)); +#249099 = DIRECTION('',(0.999934661801,1.143119107175E-02,0.)); +#249100 = ADVANCED_FACE('',(#249101),#249126,.T.); +#249101 = FACE_BOUND('',#249102,.T.); +#249102 = EDGE_LOOP('',(#249103,#249104,#249112,#249120)); +#249103 = ORIENTED_EDGE('',*,*,#249082,.T.); +#249104 = ORIENTED_EDGE('',*,*,#249105,.T.); +#249105 = EDGE_CURVE('',#249075,#249106,#249108,.T.); +#249106 = VERTEX_POINT('',#249107); +#249107 = CARTESIAN_POINT('',(121.401921,-109.32902,1.545)); +#249108 = LINE('',#249109,#249110); +#249109 = CARTESIAN_POINT('',(121.4,-111.3,1.545)); +#249110 = VECTOR('',#249111,1.); +#249111 = DIRECTION('',(9.746415933147E-04,0.999999525037,0.)); +#249112 = ORIENTED_EDGE('',*,*,#249113,.F.); +#249113 = EDGE_CURVE('',#249114,#249106,#249116,.T.); +#249114 = VERTEX_POINT('',#249115); +#249115 = CARTESIAN_POINT('',(121.401921,-109.32902,1.51)); +#249116 = LINE('',#249117,#249118); +#249117 = CARTESIAN_POINT('',(121.401921,-109.32902,1.51)); +#249118 = VECTOR('',#249119,1.); +#249119 = DIRECTION('',(0.,0.,1.)); +#249120 = ORIENTED_EDGE('',*,*,#249121,.F.); +#249121 = EDGE_CURVE('',#249083,#249114,#249122,.T.); +#249122 = LINE('',#249123,#249124); +#249123 = CARTESIAN_POINT('',(121.4,-111.3,1.51)); +#249124 = VECTOR('',#249125,1.); +#249125 = DIRECTION('',(9.746415933147E-04,0.999999525037,0.)); +#249126 = PLANE('',#249127); +#249127 = AXIS2_PLACEMENT_3D('',#249128,#249129,#249130); +#249128 = CARTESIAN_POINT('',(121.4,-111.3,1.51)); +#249129 = DIRECTION('',(-0.999999525037,9.746415933147E-04,0.)); +#249130 = DIRECTION('',(9.746415933147E-04,0.999999525037,0.)); +#249131 = ADVANCED_FACE('',(#249132),#249157,.T.); +#249132 = FACE_BOUND('',#249133,.T.); +#249133 = EDGE_LOOP('',(#249134,#249135,#249143,#249151)); +#249134 = ORIENTED_EDGE('',*,*,#249113,.T.); +#249135 = ORIENTED_EDGE('',*,*,#249136,.T.); +#249136 = EDGE_CURVE('',#249106,#249137,#249139,.T.); +#249137 = VERTEX_POINT('',#249138); +#249138 = CARTESIAN_POINT('',(121.416853,-109.292972,1.545)); +#249139 = LINE('',#249140,#249141); +#249140 = CARTESIAN_POINT('',(121.401921,-109.32902,1.545)); +#249141 = VECTOR('',#249142,1.); +#249142 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249143 = ORIENTED_EDGE('',*,*,#249144,.F.); +#249144 = EDGE_CURVE('',#249145,#249137,#249147,.T.); +#249145 = VERTEX_POINT('',#249146); +#249146 = CARTESIAN_POINT('',(121.416853,-109.292972,1.51)); +#249147 = LINE('',#249148,#249149); +#249148 = CARTESIAN_POINT('',(121.416853,-109.292972,1.51)); +#249149 = VECTOR('',#249150,1.); +#249150 = DIRECTION('',(0.,0.,1.)); +#249151 = ORIENTED_EDGE('',*,*,#249152,.F.); +#249152 = EDGE_CURVE('',#249114,#249145,#249153,.T.); +#249153 = LINE('',#249154,#249155); +#249154 = CARTESIAN_POINT('',(121.401921,-109.32902,1.51)); +#249155 = VECTOR('',#249156,1.); +#249156 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249157 = PLANE('',#249158); +#249158 = AXIS2_PLACEMENT_3D('',#249159,#249160,#249161); +#249159 = CARTESIAN_POINT('',(121.401921,-109.32902,1.51)); +#249160 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#249161 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249162 = ADVANCED_FACE('',(#249163),#249188,.T.); +#249163 = FACE_BOUND('',#249164,.T.); +#249164 = EDGE_LOOP('',(#249165,#249166,#249174,#249182)); +#249165 = ORIENTED_EDGE('',*,*,#249144,.T.); +#249166 = ORIENTED_EDGE('',*,*,#249167,.T.); +#249167 = EDGE_CURVE('',#249137,#249168,#249170,.T.); +#249168 = VERTEX_POINT('',#249169); +#249169 = CARTESIAN_POINT('',(123.311358,-107.395749,1.545)); +#249170 = LINE('',#249171,#249172); +#249171 = CARTESIAN_POINT('',(121.416853,-109.292972,1.545)); +#249172 = VECTOR('',#249173,1.); +#249173 = DIRECTION('',(0.706599728841,0.707613470195,0.)); +#249174 = ORIENTED_EDGE('',*,*,#249175,.F.); +#249175 = EDGE_CURVE('',#249176,#249168,#249178,.T.); +#249176 = VERTEX_POINT('',#249177); +#249177 = CARTESIAN_POINT('',(123.311358,-107.395749,1.51)); +#249178 = LINE('',#249179,#249180); +#249179 = CARTESIAN_POINT('',(123.311358,-107.395749,1.51)); +#249180 = VECTOR('',#249181,1.); +#249181 = DIRECTION('',(0.,0.,1.)); +#249182 = ORIENTED_EDGE('',*,*,#249183,.F.); +#249183 = EDGE_CURVE('',#249145,#249176,#249184,.T.); +#249184 = LINE('',#249185,#249186); +#249185 = CARTESIAN_POINT('',(121.416853,-109.292972,1.51)); +#249186 = VECTOR('',#249187,1.); +#249187 = DIRECTION('',(0.706599728841,0.707613470195,0.)); +#249188 = PLANE('',#249189); +#249189 = AXIS2_PLACEMENT_3D('',#249190,#249191,#249192); +#249190 = CARTESIAN_POINT('',(121.416853,-109.292972,1.51)); +#249191 = DIRECTION('',(-0.707613470195,0.706599728841,0.)); +#249192 = DIRECTION('',(0.706599728841,0.707613470195,0.)); +#249193 = ADVANCED_FACE('',(#249194),#249219,.T.); +#249194 = FACE_BOUND('',#249195,.T.); +#249195 = EDGE_LOOP('',(#249196,#249197,#249205,#249213)); +#249196 = ORIENTED_EDGE('',*,*,#249175,.T.); +#249197 = ORIENTED_EDGE('',*,*,#249198,.T.); +#249198 = EDGE_CURVE('',#249168,#249199,#249201,.T.); +#249199 = VERTEX_POINT('',#249200); +#249200 = CARTESIAN_POINT('',(123.313279,-103.266849,1.545)); +#249201 = LINE('',#249202,#249203); +#249202 = CARTESIAN_POINT('',(123.311358,-107.395749,1.545)); +#249203 = VECTOR('',#249204,1.); +#249204 = DIRECTION('',(4.652570399094E-04,0.999999891768,0.)); +#249205 = ORIENTED_EDGE('',*,*,#249206,.F.); +#249206 = EDGE_CURVE('',#249207,#249199,#249209,.T.); +#249207 = VERTEX_POINT('',#249208); +#249208 = CARTESIAN_POINT('',(123.313279,-103.266849,1.51)); +#249209 = LINE('',#249210,#249211); +#249210 = CARTESIAN_POINT('',(123.313279,-103.266849,1.51)); +#249211 = VECTOR('',#249212,1.); +#249212 = DIRECTION('',(0.,0.,1.)); +#249213 = ORIENTED_EDGE('',*,*,#249214,.F.); +#249214 = EDGE_CURVE('',#249176,#249207,#249215,.T.); +#249215 = LINE('',#249216,#249217); +#249216 = CARTESIAN_POINT('',(123.311358,-107.395749,1.51)); +#249217 = VECTOR('',#249218,1.); +#249218 = DIRECTION('',(4.652570399094E-04,0.999999891768,0.)); +#249219 = PLANE('',#249220); +#249220 = AXIS2_PLACEMENT_3D('',#249221,#249222,#249223); +#249221 = CARTESIAN_POINT('',(123.311358,-107.395749,1.51)); +#249222 = DIRECTION('',(-0.999999891768,4.652570399094E-04,0.)); +#249223 = DIRECTION('',(4.652570399094E-04,0.999999891768,0.)); +#249224 = ADVANCED_FACE('',(#249225),#249250,.T.); +#249225 = FACE_BOUND('',#249226,.T.); +#249226 = EDGE_LOOP('',(#249227,#249228,#249236,#249244)); +#249227 = ORIENTED_EDGE('',*,*,#249206,.T.); +#249228 = ORIENTED_EDGE('',*,*,#249229,.T.); +#249229 = EDGE_CURVE('',#249199,#249230,#249232,.T.); +#249230 = VERTEX_POINT('',#249231); +#249231 = CARTESIAN_POINT('',(123.328211,-103.230801,1.545)); +#249232 = LINE('',#249233,#249234); +#249233 = CARTESIAN_POINT('',(123.313279,-103.266849,1.545)); +#249234 = VECTOR('',#249235,1.); +#249235 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249236 = ORIENTED_EDGE('',*,*,#249237,.F.); +#249237 = EDGE_CURVE('',#249238,#249230,#249240,.T.); +#249238 = VERTEX_POINT('',#249239); +#249239 = CARTESIAN_POINT('',(123.328211,-103.230801,1.51)); +#249240 = LINE('',#249241,#249242); +#249241 = CARTESIAN_POINT('',(123.328211,-103.230801,1.51)); +#249242 = VECTOR('',#249243,1.); +#249243 = DIRECTION('',(0.,0.,1.)); +#249244 = ORIENTED_EDGE('',*,*,#249245,.F.); +#249245 = EDGE_CURVE('',#249207,#249238,#249246,.T.); +#249246 = LINE('',#249247,#249248); +#249247 = CARTESIAN_POINT('',(123.313279,-103.266849,1.51)); +#249248 = VECTOR('',#249249,1.); +#249249 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249250 = PLANE('',#249251); +#249251 = AXIS2_PLACEMENT_3D('',#249252,#249253,#249254); +#249252 = CARTESIAN_POINT('',(123.313279,-103.266849,1.51)); +#249253 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#249254 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249255 = ADVANCED_FACE('',(#249256),#249281,.T.); +#249256 = FACE_BOUND('',#249257,.T.); +#249257 = EDGE_LOOP('',(#249258,#249259,#249267,#249275)); +#249258 = ORIENTED_EDGE('',*,*,#249237,.T.); +#249259 = ORIENTED_EDGE('',*,*,#249260,.T.); +#249260 = EDGE_CURVE('',#249230,#249261,#249263,.T.); +#249261 = VERTEX_POINT('',#249262); +#249262 = CARTESIAN_POINT('',(127.3,-99.256294,1.545)); +#249263 = LINE('',#249264,#249265); +#249264 = CARTESIAN_POINT('',(123.328211,-103.230801,1.545)); +#249265 = VECTOR('',#249266,1.); +#249266 = DIRECTION('',(0.70686487668,0.707348602964,0.)); +#249267 = ORIENTED_EDGE('',*,*,#249268,.F.); +#249268 = EDGE_CURVE('',#249269,#249261,#249271,.T.); +#249269 = VERTEX_POINT('',#249270); +#249270 = CARTESIAN_POINT('',(127.3,-99.256294,1.51)); +#249271 = LINE('',#249272,#249273); +#249272 = CARTESIAN_POINT('',(127.3,-99.256294,1.51)); +#249273 = VECTOR('',#249274,1.); +#249274 = DIRECTION('',(0.,0.,1.)); +#249275 = ORIENTED_EDGE('',*,*,#249276,.F.); +#249276 = EDGE_CURVE('',#249238,#249269,#249277,.T.); +#249277 = LINE('',#249278,#249279); +#249278 = CARTESIAN_POINT('',(123.328211,-103.230801,1.51)); +#249279 = VECTOR('',#249280,1.); +#249280 = DIRECTION('',(0.70686487668,0.707348602964,0.)); +#249281 = PLANE('',#249282); +#249282 = AXIS2_PLACEMENT_3D('',#249283,#249284,#249285); +#249283 = CARTESIAN_POINT('',(123.328211,-103.230801,1.51)); +#249284 = DIRECTION('',(-0.707348602964,0.70686487668,0.)); +#249285 = DIRECTION('',(0.70686487668,0.707348602964,0.)); +#249286 = ADVANCED_FACE('',(#249287),#249312,.T.); +#249287 = FACE_BOUND('',#249288,.T.); +#249288 = EDGE_LOOP('',(#249289,#249290,#249298,#249306)); +#249289 = ORIENTED_EDGE('',*,*,#249268,.T.); +#249290 = ORIENTED_EDGE('',*,*,#249291,.T.); +#249291 = EDGE_CURVE('',#249261,#249292,#249294,.T.); +#249292 = VERTEX_POINT('',#249293); +#249293 = CARTESIAN_POINT('',(127.301921,-81.080491,1.545)); +#249294 = LINE('',#249295,#249296); +#249295 = CARTESIAN_POINT('',(127.3,-99.256294,1.545)); +#249296 = VECTOR('',#249297,1.); +#249297 = DIRECTION('',(1.056899653494E-04,0.999999994415,0.)); +#249298 = ORIENTED_EDGE('',*,*,#249299,.F.); +#249299 = EDGE_CURVE('',#249300,#249292,#249302,.T.); +#249300 = VERTEX_POINT('',#249301); +#249301 = CARTESIAN_POINT('',(127.301921,-81.080491,1.51)); +#249302 = LINE('',#249303,#249304); +#249303 = CARTESIAN_POINT('',(127.301921,-81.080491,1.51)); +#249304 = VECTOR('',#249305,1.); +#249305 = DIRECTION('',(0.,0.,1.)); +#249306 = ORIENTED_EDGE('',*,*,#249307,.F.); +#249307 = EDGE_CURVE('',#249269,#249300,#249308,.T.); +#249308 = LINE('',#249309,#249310); +#249309 = CARTESIAN_POINT('',(127.3,-99.256294,1.51)); +#249310 = VECTOR('',#249311,1.); +#249311 = DIRECTION('',(1.056899653494E-04,0.999999994415,0.)); +#249312 = PLANE('',#249313); +#249313 = AXIS2_PLACEMENT_3D('',#249314,#249315,#249316); +#249314 = CARTESIAN_POINT('',(127.3,-99.256294,1.51)); +#249315 = DIRECTION('',(-0.999999994415,1.056899653494E-04,0.)); +#249316 = DIRECTION('',(1.056899653494E-04,0.999999994415,0.)); +#249317 = ADVANCED_FACE('',(#249318),#249343,.T.); +#249318 = FACE_BOUND('',#249319,.T.); +#249319 = EDGE_LOOP('',(#249320,#249321,#249329,#249337)); +#249320 = ORIENTED_EDGE('',*,*,#249299,.T.); +#249321 = ORIENTED_EDGE('',*,*,#249322,.T.); +#249322 = EDGE_CURVE('',#249292,#249323,#249325,.T.); +#249323 = VERTEX_POINT('',#249324); +#249324 = CARTESIAN_POINT('',(127.316853,-81.044443,1.545)); +#249325 = LINE('',#249326,#249327); +#249326 = CARTESIAN_POINT('',(127.301921,-81.080491,1.545)); +#249327 = VECTOR('',#249328,1.); +#249328 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249329 = ORIENTED_EDGE('',*,*,#249330,.F.); +#249330 = EDGE_CURVE('',#249331,#249323,#249333,.T.); +#249331 = VERTEX_POINT('',#249332); +#249332 = CARTESIAN_POINT('',(127.316853,-81.044443,1.51)); +#249333 = LINE('',#249334,#249335); +#249334 = CARTESIAN_POINT('',(127.316853,-81.044443,1.51)); +#249335 = VECTOR('',#249336,1.); +#249336 = DIRECTION('',(0.,0.,1.)); +#249337 = ORIENTED_EDGE('',*,*,#249338,.F.); +#249338 = EDGE_CURVE('',#249300,#249331,#249339,.T.); +#249339 = LINE('',#249340,#249341); +#249340 = CARTESIAN_POINT('',(127.301921,-81.080491,1.51)); +#249341 = VECTOR('',#249342,1.); +#249342 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249343 = PLANE('',#249344); +#249344 = AXIS2_PLACEMENT_3D('',#249345,#249346,#249347); +#249345 = CARTESIAN_POINT('',(127.301921,-81.080491,1.51)); +#249346 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#249347 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#249348 = ADVANCED_FACE('',(#249349),#249365,.T.); +#249349 = FACE_BOUND('',#249350,.T.); +#249350 = EDGE_LOOP('',(#249351,#249352,#249358,#249359)); +#249351 = ORIENTED_EDGE('',*,*,#249330,.T.); +#249352 = ORIENTED_EDGE('',*,*,#249353,.T.); +#249353 = EDGE_CURVE('',#249323,#247848,#249354,.T.); +#249354 = LINE('',#249355,#249356); +#249355 = CARTESIAN_POINT('',(127.316853,-81.044443,1.545)); +#249356 = VECTOR('',#249357,1.); +#249357 = DIRECTION('',(0.707106495507,0.707107066866,0.)); +#249358 = ORIENTED_EDGE('',*,*,#247845,.F.); +#249359 = ORIENTED_EDGE('',*,*,#249360,.F.); +#249360 = EDGE_CURVE('',#249331,#247846,#249361,.T.); +#249361 = LINE('',#249362,#249363); +#249362 = CARTESIAN_POINT('',(127.316853,-81.044443,1.51)); +#249363 = VECTOR('',#249364,1.); +#249364 = DIRECTION('',(0.707106495507,0.707107066866,0.)); +#249365 = PLANE('',#249366); +#249366 = AXIS2_PLACEMENT_3D('',#249367,#249368,#249369); +#249367 = CARTESIAN_POINT('',(127.316853,-81.044443,1.51)); +#249368 = DIRECTION('',(-0.707107066866,0.707106495507,0.)); +#249369 = DIRECTION('',(0.707106495507,0.707107066866,0.)); +#249370 = ADVANCED_FACE('',(#249371),#249422,.F.); +#249371 = FACE_BOUND('',#249372,.T.); +#249372 = EDGE_LOOP('',(#249373,#249374,#249375,#249376,#249377,#249378, + #249379,#249380,#249381,#249382,#249383,#249384,#249385,#249386, + #249387,#249388,#249389,#249390,#249391,#249392,#249393,#249394, + #249395,#249396,#249397,#249398,#249399,#249400,#249401,#249402, + #249403,#249404,#249405,#249406,#249407,#249408,#249409,#249410, + #249411,#249412,#249413,#249414,#249415,#249416,#249417,#249418, + #249419,#249420,#249421)); +#249373 = ORIENTED_EDGE('',*,*,#247871,.T.); +#249374 = ORIENTED_EDGE('',*,*,#247902,.T.); +#249375 = ORIENTED_EDGE('',*,*,#247934,.T.); +#249376 = ORIENTED_EDGE('',*,*,#247966,.T.); +#249377 = ORIENTED_EDGE('',*,*,#247997,.T.); +#249378 = ORIENTED_EDGE('',*,*,#248028,.T.); +#249379 = ORIENTED_EDGE('',*,*,#248059,.T.); +#249380 = ORIENTED_EDGE('',*,*,#248090,.T.); +#249381 = ORIENTED_EDGE('',*,*,#248121,.T.); +#249382 = ORIENTED_EDGE('',*,*,#248152,.T.); +#249383 = ORIENTED_EDGE('',*,*,#248183,.T.); +#249384 = ORIENTED_EDGE('',*,*,#248214,.T.); +#249385 = ORIENTED_EDGE('',*,*,#248246,.T.); +#249386 = ORIENTED_EDGE('',*,*,#248278,.T.); +#249387 = ORIENTED_EDGE('',*,*,#248309,.T.); +#249388 = ORIENTED_EDGE('',*,*,#248340,.T.); +#249389 = ORIENTED_EDGE('',*,*,#248371,.T.); +#249390 = ORIENTED_EDGE('',*,*,#248403,.T.); +#249391 = ORIENTED_EDGE('',*,*,#248435,.T.); +#249392 = ORIENTED_EDGE('',*,*,#248466,.T.); +#249393 = ORIENTED_EDGE('',*,*,#248497,.T.); +#249394 = ORIENTED_EDGE('',*,*,#248528,.T.); +#249395 = ORIENTED_EDGE('',*,*,#248559,.T.); +#249396 = ORIENTED_EDGE('',*,*,#248590,.T.); +#249397 = ORIENTED_EDGE('',*,*,#248622,.T.); +#249398 = ORIENTED_EDGE('',*,*,#248654,.T.); +#249399 = ORIENTED_EDGE('',*,*,#248685,.T.); +#249400 = ORIENTED_EDGE('',*,*,#248716,.T.); +#249401 = ORIENTED_EDGE('',*,*,#248747,.T.); +#249402 = ORIENTED_EDGE('',*,*,#248778,.T.); +#249403 = ORIENTED_EDGE('',*,*,#248809,.T.); +#249404 = ORIENTED_EDGE('',*,*,#248841,.T.); +#249405 = ORIENTED_EDGE('',*,*,#248873,.T.); +#249406 = ORIENTED_EDGE('',*,*,#248904,.T.); +#249407 = ORIENTED_EDGE('',*,*,#248935,.T.); +#249408 = ORIENTED_EDGE('',*,*,#248966,.T.); +#249409 = ORIENTED_EDGE('',*,*,#248997,.T.); +#249410 = ORIENTED_EDGE('',*,*,#249028,.T.); +#249411 = ORIENTED_EDGE('',*,*,#249059,.T.); +#249412 = ORIENTED_EDGE('',*,*,#249090,.T.); +#249413 = ORIENTED_EDGE('',*,*,#249121,.T.); +#249414 = ORIENTED_EDGE('',*,*,#249152,.T.); +#249415 = ORIENTED_EDGE('',*,*,#249183,.T.); +#249416 = ORIENTED_EDGE('',*,*,#249214,.T.); +#249417 = ORIENTED_EDGE('',*,*,#249245,.T.); +#249418 = ORIENTED_EDGE('',*,*,#249276,.T.); +#249419 = ORIENTED_EDGE('',*,*,#249307,.T.); +#249420 = ORIENTED_EDGE('',*,*,#249338,.T.); +#249421 = ORIENTED_EDGE('',*,*,#249360,.T.); +#249422 = PLANE('',#249423); +#249423 = AXIS2_PLACEMENT_3D('',#249424,#249425,#249426); +#249424 = CARTESIAN_POINT('',(0.,0.,1.51)); +#249425 = DIRECTION('',(0.,0.,1.)); +#249426 = DIRECTION('',(1.,0.,-0.)); +#249427 = ADVANCED_FACE('',(#249428),#249479,.T.); +#249428 = FACE_BOUND('',#249429,.F.); +#249429 = EDGE_LOOP('',(#249430,#249431,#249432,#249433,#249434,#249435, + #249436,#249437,#249438,#249439,#249440,#249441,#249442,#249443, + #249444,#249445,#249446,#249447,#249448,#249449,#249450,#249451, + #249452,#249453,#249454,#249455,#249456,#249457,#249458,#249459, + #249460,#249461,#249462,#249463,#249464,#249465,#249466,#249467, + #249468,#249469,#249470,#249471,#249472,#249473,#249474,#249475, + #249476,#249477,#249478)); +#249430 = ORIENTED_EDGE('',*,*,#247855,.T.); +#249431 = ORIENTED_EDGE('',*,*,#247886,.T.); +#249432 = ORIENTED_EDGE('',*,*,#247917,.T.); +#249433 = ORIENTED_EDGE('',*,*,#247950,.T.); +#249434 = ORIENTED_EDGE('',*,*,#247981,.T.); +#249435 = ORIENTED_EDGE('',*,*,#248012,.T.); +#249436 = ORIENTED_EDGE('',*,*,#248043,.T.); +#249437 = ORIENTED_EDGE('',*,*,#248074,.T.); +#249438 = ORIENTED_EDGE('',*,*,#248105,.T.); +#249439 = ORIENTED_EDGE('',*,*,#248136,.T.); +#249440 = ORIENTED_EDGE('',*,*,#248167,.T.); +#249441 = ORIENTED_EDGE('',*,*,#248198,.T.); +#249442 = ORIENTED_EDGE('',*,*,#248229,.T.); +#249443 = ORIENTED_EDGE('',*,*,#248262,.T.); +#249444 = ORIENTED_EDGE('',*,*,#248293,.T.); +#249445 = ORIENTED_EDGE('',*,*,#248324,.T.); +#249446 = ORIENTED_EDGE('',*,*,#248355,.T.); +#249447 = ORIENTED_EDGE('',*,*,#248386,.T.); +#249448 = ORIENTED_EDGE('',*,*,#248419,.T.); +#249449 = ORIENTED_EDGE('',*,*,#248450,.T.); +#249450 = ORIENTED_EDGE('',*,*,#248481,.T.); +#249451 = ORIENTED_EDGE('',*,*,#248512,.T.); +#249452 = ORIENTED_EDGE('',*,*,#248543,.T.); +#249453 = ORIENTED_EDGE('',*,*,#248574,.T.); +#249454 = ORIENTED_EDGE('',*,*,#248605,.T.); +#249455 = ORIENTED_EDGE('',*,*,#248638,.T.); +#249456 = ORIENTED_EDGE('',*,*,#248669,.T.); +#249457 = ORIENTED_EDGE('',*,*,#248700,.T.); +#249458 = ORIENTED_EDGE('',*,*,#248731,.T.); +#249459 = ORIENTED_EDGE('',*,*,#248762,.T.); +#249460 = ORIENTED_EDGE('',*,*,#248793,.T.); +#249461 = ORIENTED_EDGE('',*,*,#248824,.T.); +#249462 = ORIENTED_EDGE('',*,*,#248857,.T.); +#249463 = ORIENTED_EDGE('',*,*,#248888,.T.); +#249464 = ORIENTED_EDGE('',*,*,#248919,.T.); +#249465 = ORIENTED_EDGE('',*,*,#248950,.T.); +#249466 = ORIENTED_EDGE('',*,*,#248981,.T.); +#249467 = ORIENTED_EDGE('',*,*,#249012,.T.); +#249468 = ORIENTED_EDGE('',*,*,#249043,.T.); +#249469 = ORIENTED_EDGE('',*,*,#249074,.T.); +#249470 = ORIENTED_EDGE('',*,*,#249105,.T.); +#249471 = ORIENTED_EDGE('',*,*,#249136,.T.); +#249472 = ORIENTED_EDGE('',*,*,#249167,.T.); +#249473 = ORIENTED_EDGE('',*,*,#249198,.T.); +#249474 = ORIENTED_EDGE('',*,*,#249229,.T.); +#249475 = ORIENTED_EDGE('',*,*,#249260,.T.); +#249476 = ORIENTED_EDGE('',*,*,#249291,.T.); +#249477 = ORIENTED_EDGE('',*,*,#249322,.T.); +#249478 = ORIENTED_EDGE('',*,*,#249353,.T.); +#249479 = PLANE('',#249480); +#249480 = AXIS2_PLACEMENT_3D('',#249481,#249482,#249483); +#249481 = CARTESIAN_POINT('',(0.,0.,1.545)); +#249482 = DIRECTION('',(0.,0.,1.)); +#249483 = DIRECTION('',(1.,0.,-0.)); +#249484 = MANIFOLD_SOLID_BREP('',#249485); +#249485 = CLOSED_SHELL('',(#249486,#249526,#249557,#249588,#249619, + #249650,#249681,#249712,#249745,#249776,#249807,#249838,#249869, + #249902,#249933,#249964,#249995,#250026,#250057,#250088,#250121, + #250152,#250183,#250214,#250236,#250268)); +#249486 = ADVANCED_FACE('',(#249487),#249521,.T.); +#249487 = FACE_BOUND('',#249488,.T.); +#249488 = EDGE_LOOP('',(#249489,#249499,#249507,#249515)); +#249489 = ORIENTED_EDGE('',*,*,#249490,.T.); +#249490 = EDGE_CURVE('',#249491,#249493,#249495,.T.); +#249491 = VERTEX_POINT('',#249492); +#249492 = CARTESIAN_POINT('',(131.005519,-151.416853,1.51)); +#249493 = VERTEX_POINT('',#249494); +#249494 = CARTESIAN_POINT('',(131.005519,-151.416853,1.545)); +#249495 = LINE('',#249496,#249497); +#249496 = CARTESIAN_POINT('',(131.005519,-151.416853,1.51)); +#249497 = VECTOR('',#249498,1.); +#249498 = DIRECTION('',(0.,0.,1.)); +#249499 = ORIENTED_EDGE('',*,*,#249500,.T.); +#249500 = EDGE_CURVE('',#249493,#249501,#249503,.T.); +#249501 = VERTEX_POINT('',#249502); +#249502 = CARTESIAN_POINT('',(131.041567,-151.401921,1.545)); +#249503 = LINE('',#249504,#249505); +#249504 = CARTESIAN_POINT('',(131.005519,-151.416853,1.545)); +#249505 = VECTOR('',#249506,1.); +#249506 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249507 = ORIENTED_EDGE('',*,*,#249508,.F.); +#249508 = EDGE_CURVE('',#249509,#249501,#249511,.T.); +#249509 = VERTEX_POINT('',#249510); +#249510 = CARTESIAN_POINT('',(131.041567,-151.401921,1.51)); +#249511 = LINE('',#249512,#249513); +#249512 = CARTESIAN_POINT('',(131.041567,-151.401921,1.51)); +#249513 = VECTOR('',#249514,1.); +#249514 = DIRECTION('',(0.,0.,1.)); +#249515 = ORIENTED_EDGE('',*,*,#249516,.F.); +#249516 = EDGE_CURVE('',#249491,#249509,#249517,.T.); +#249517 = LINE('',#249518,#249519); +#249518 = CARTESIAN_POINT('',(131.005519,-151.416853,1.51)); +#249519 = VECTOR('',#249520,1.); +#249520 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249521 = PLANE('',#249522); +#249522 = AXIS2_PLACEMENT_3D('',#249523,#249524,#249525); +#249523 = CARTESIAN_POINT('',(131.005519,-151.416853,1.51)); +#249524 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#249525 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#249526 = ADVANCED_FACE('',(#249527),#249552,.T.); +#249527 = FACE_BOUND('',#249528,.T.); +#249528 = EDGE_LOOP('',(#249529,#249530,#249538,#249546)); +#249529 = ORIENTED_EDGE('',*,*,#249508,.T.); +#249530 = ORIENTED_EDGE('',*,*,#249531,.T.); +#249531 = EDGE_CURVE('',#249501,#249532,#249534,.T.); +#249532 = VERTEX_POINT('',#249533); +#249533 = CARTESIAN_POINT('',(137.25,-151.4,1.545)); +#249534 = LINE('',#249535,#249536); +#249535 = CARTESIAN_POINT('',(131.041567,-151.401921,1.545)); +#249536 = VECTOR('',#249537,1.); +#249537 = DIRECTION('',(0.99999995213,3.094178366786E-04,0.)); +#249538 = ORIENTED_EDGE('',*,*,#249539,.F.); +#249539 = EDGE_CURVE('',#249540,#249532,#249542,.T.); +#249540 = VERTEX_POINT('',#249541); +#249541 = CARTESIAN_POINT('',(137.25,-151.4,1.51)); +#249542 = LINE('',#249543,#249544); +#249543 = CARTESIAN_POINT('',(137.25,-151.4,1.51)); +#249544 = VECTOR('',#249545,1.); +#249545 = DIRECTION('',(0.,0.,1.)); +#249546 = ORIENTED_EDGE('',*,*,#249547,.F.); +#249547 = EDGE_CURVE('',#249509,#249540,#249548,.T.); +#249548 = LINE('',#249549,#249550); +#249549 = CARTESIAN_POINT('',(131.041567,-151.401921,1.51)); +#249550 = VECTOR('',#249551,1.); +#249551 = DIRECTION('',(0.99999995213,3.094178366786E-04,0.)); +#249552 = PLANE('',#249553); +#249553 = AXIS2_PLACEMENT_3D('',#249554,#249555,#249556); +#249554 = CARTESIAN_POINT('',(131.041567,-151.401921,1.51)); +#249555 = DIRECTION('',(-3.094178366786E-04,0.99999995213,0.)); +#249556 = DIRECTION('',(0.99999995213,3.094178366786E-04,0.)); +#249557 = ADVANCED_FACE('',(#249558),#249583,.T.); +#249558 = FACE_BOUND('',#249559,.T.); +#249559 = EDGE_LOOP('',(#249560,#249561,#249569,#249577)); +#249560 = ORIENTED_EDGE('',*,*,#249539,.T.); +#249561 = ORIENTED_EDGE('',*,*,#249562,.T.); +#249562 = EDGE_CURVE('',#249532,#249563,#249565,.T.); +#249563 = VERTEX_POINT('',#249564); +#249564 = CARTESIAN_POINT('',(137.769509,-151.401921,1.545)); +#249565 = LINE('',#249566,#249567); +#249566 = CARTESIAN_POINT('',(137.25,-151.4,1.545)); +#249567 = VECTOR('',#249568,1.); +#249568 = DIRECTION('',(0.999993163495,-3.697696992845E-03,0.)); +#249569 = ORIENTED_EDGE('',*,*,#249570,.F.); +#249570 = EDGE_CURVE('',#249571,#249563,#249573,.T.); +#249571 = VERTEX_POINT('',#249572); +#249572 = CARTESIAN_POINT('',(137.769509,-151.401921,1.51)); +#249573 = LINE('',#249574,#249575); +#249574 = CARTESIAN_POINT('',(137.769509,-151.401921,1.51)); +#249575 = VECTOR('',#249576,1.); +#249576 = DIRECTION('',(0.,0.,1.)); +#249577 = ORIENTED_EDGE('',*,*,#249578,.F.); +#249578 = EDGE_CURVE('',#249540,#249571,#249579,.T.); +#249579 = LINE('',#249580,#249581); +#249580 = CARTESIAN_POINT('',(137.25,-151.4,1.51)); +#249581 = VECTOR('',#249582,1.); +#249582 = DIRECTION('',(0.999993163495,-3.697696992845E-03,0.)); +#249583 = PLANE('',#249584); +#249584 = AXIS2_PLACEMENT_3D('',#249585,#249586,#249587); +#249585 = CARTESIAN_POINT('',(137.25,-151.4,1.51)); +#249586 = DIRECTION('',(3.697696992845E-03,0.999993163495,-0.)); +#249587 = DIRECTION('',(0.999993163495,-3.697696992845E-03,0.)); +#249588 = ADVANCED_FACE('',(#249589),#249614,.T.); +#249589 = FACE_BOUND('',#249590,.T.); +#249590 = EDGE_LOOP('',(#249591,#249592,#249600,#249608)); +#249591 = ORIENTED_EDGE('',*,*,#249570,.T.); +#249592 = ORIENTED_EDGE('',*,*,#249593,.T.); +#249593 = EDGE_CURVE('',#249563,#249594,#249596,.T.); +#249594 = VERTEX_POINT('',#249595); +#249595 = CARTESIAN_POINT('',(137.805557,-151.416853,1.545)); +#249596 = LINE('',#249597,#249598); +#249597 = CARTESIAN_POINT('',(137.769509,-151.401921,1.545)); +#249598 = VECTOR('',#249599,1.); +#249599 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#249600 = ORIENTED_EDGE('',*,*,#249601,.F.); +#249601 = EDGE_CURVE('',#249602,#249594,#249604,.T.); +#249602 = VERTEX_POINT('',#249603); +#249603 = CARTESIAN_POINT('',(137.805557,-151.416853,1.51)); +#249604 = LINE('',#249605,#249606); +#249605 = CARTESIAN_POINT('',(137.805557,-151.416853,1.51)); +#249606 = VECTOR('',#249607,1.); +#249607 = DIRECTION('',(0.,0.,1.)); +#249608 = ORIENTED_EDGE('',*,*,#249609,.F.); +#249609 = EDGE_CURVE('',#249571,#249602,#249610,.T.); +#249610 = LINE('',#249611,#249612); +#249611 = CARTESIAN_POINT('',(137.769509,-151.401921,1.51)); +#249612 = VECTOR('',#249613,1.); +#249613 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#249614 = PLANE('',#249615); +#249615 = AXIS2_PLACEMENT_3D('',#249616,#249617,#249618); +#249616 = CARTESIAN_POINT('',(137.769509,-151.401921,1.51)); +#249617 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#249618 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#249619 = ADVANCED_FACE('',(#249620),#249645,.T.); +#249620 = FACE_BOUND('',#249621,.T.); +#249621 = EDGE_LOOP('',(#249622,#249623,#249631,#249639)); +#249622 = ORIENTED_EDGE('',*,*,#249601,.T.); +#249623 = ORIENTED_EDGE('',*,*,#249624,.T.); +#249624 = EDGE_CURVE('',#249594,#249625,#249627,.T.); +#249625 = VERTEX_POINT('',#249626); +#249626 = CARTESIAN_POINT('',(138.333147,-151.944443,1.545)); +#249627 = LINE('',#249628,#249629); +#249628 = CARTESIAN_POINT('',(137.805557,-151.416853,1.545)); +#249629 = VECTOR('',#249630,1.); +#249630 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249631 = ORIENTED_EDGE('',*,*,#249632,.F.); +#249632 = EDGE_CURVE('',#249633,#249625,#249635,.T.); +#249633 = VERTEX_POINT('',#249634); +#249634 = CARTESIAN_POINT('',(138.333147,-151.944443,1.51)); +#249635 = LINE('',#249636,#249637); +#249636 = CARTESIAN_POINT('',(138.333147,-151.944443,1.51)); +#249637 = VECTOR('',#249638,1.); +#249638 = DIRECTION('',(0.,0.,1.)); +#249639 = ORIENTED_EDGE('',*,*,#249640,.F.); +#249640 = EDGE_CURVE('',#249602,#249633,#249641,.T.); +#249641 = LINE('',#249642,#249643); +#249642 = CARTESIAN_POINT('',(137.805557,-151.416853,1.51)); +#249643 = VECTOR('',#249644,1.); +#249644 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249645 = PLANE('',#249646); +#249646 = AXIS2_PLACEMENT_3D('',#249647,#249648,#249649); +#249647 = CARTESIAN_POINT('',(137.805557,-151.416853,1.51)); +#249648 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#249649 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249650 = ADVANCED_FACE('',(#249651),#249676,.T.); +#249651 = FACE_BOUND('',#249652,.T.); +#249652 = EDGE_LOOP('',(#249653,#249654,#249662,#249670)); +#249653 = ORIENTED_EDGE('',*,*,#249632,.T.); +#249654 = ORIENTED_EDGE('',*,*,#249655,.T.); +#249655 = EDGE_CURVE('',#249625,#249656,#249658,.T.); +#249656 = VERTEX_POINT('',#249657); +#249657 = CARTESIAN_POINT('',(138.348079,-151.980491,1.545)); +#249658 = LINE('',#249659,#249660); +#249659 = CARTESIAN_POINT('',(138.333147,-151.944443,1.545)); +#249660 = VECTOR('',#249661,1.); +#249661 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#249662 = ORIENTED_EDGE('',*,*,#249663,.F.); +#249663 = EDGE_CURVE('',#249664,#249656,#249666,.T.); +#249664 = VERTEX_POINT('',#249665); +#249665 = CARTESIAN_POINT('',(138.348079,-151.980491,1.51)); +#249666 = LINE('',#249667,#249668); +#249667 = CARTESIAN_POINT('',(138.348079,-151.980491,1.51)); +#249668 = VECTOR('',#249669,1.); +#249669 = DIRECTION('',(0.,0.,1.)); +#249670 = ORIENTED_EDGE('',*,*,#249671,.F.); +#249671 = EDGE_CURVE('',#249633,#249664,#249672,.T.); +#249672 = LINE('',#249673,#249674); +#249673 = CARTESIAN_POINT('',(138.333147,-151.944443,1.51)); +#249674 = VECTOR('',#249675,1.); +#249675 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#249676 = PLANE('',#249677); +#249677 = AXIS2_PLACEMENT_3D('',#249678,#249679,#249680); +#249678 = CARTESIAN_POINT('',(138.333147,-151.944443,1.51)); +#249679 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#249680 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#249681 = ADVANCED_FACE('',(#249682),#249707,.T.); +#249682 = FACE_BOUND('',#249683,.T.); +#249683 = EDGE_LOOP('',(#249684,#249685,#249693,#249701)); +#249684 = ORIENTED_EDGE('',*,*,#249663,.T.); +#249685 = ORIENTED_EDGE('',*,*,#249686,.T.); +#249686 = EDGE_CURVE('',#249656,#249687,#249689,.T.); +#249687 = VERTEX_POINT('',#249688); +#249688 = CARTESIAN_POINT('',(138.348079,-153.074509,1.545)); +#249689 = LINE('',#249690,#249691); +#249690 = CARTESIAN_POINT('',(138.348079,-151.980491,1.545)); +#249691 = VECTOR('',#249692,1.); +#249692 = DIRECTION('',(0.,-1.,0.)); +#249693 = ORIENTED_EDGE('',*,*,#249694,.F.); +#249694 = EDGE_CURVE('',#249695,#249687,#249697,.T.); +#249695 = VERTEX_POINT('',#249696); +#249696 = CARTESIAN_POINT('',(138.348079,-153.074509,1.51)); +#249697 = LINE('',#249698,#249699); +#249698 = CARTESIAN_POINT('',(138.348079,-153.074509,1.51)); +#249699 = VECTOR('',#249700,1.); +#249700 = DIRECTION('',(0.,0.,1.)); +#249701 = ORIENTED_EDGE('',*,*,#249702,.F.); +#249702 = EDGE_CURVE('',#249664,#249695,#249703,.T.); +#249703 = LINE('',#249704,#249705); +#249704 = CARTESIAN_POINT('',(138.348079,-151.980491,1.51)); +#249705 = VECTOR('',#249706,1.); +#249706 = DIRECTION('',(0.,-1.,0.)); +#249707 = PLANE('',#249708); +#249708 = AXIS2_PLACEMENT_3D('',#249709,#249710,#249711); +#249709 = CARTESIAN_POINT('',(138.348079,-151.980491,1.51)); +#249710 = DIRECTION('',(1.,0.,-0.)); +#249711 = DIRECTION('',(0.,-1.,0.)); +#249712 = ADVANCED_FACE('',(#249713),#249740,.T.); +#249713 = FACE_BOUND('',#249714,.T.); +#249714 = EDGE_LOOP('',(#249715,#249716,#249725,#249733)); +#249715 = ORIENTED_EDGE('',*,*,#249694,.T.); +#249716 = ORIENTED_EDGE('',*,*,#249717,.T.); +#249717 = EDGE_CURVE('',#249687,#249718,#249720,.T.); +#249718 = VERTEX_POINT('',#249719); +#249719 = CARTESIAN_POINT('',(138.151921,-153.074509,1.545)); +#249720 = CIRCLE('',#249721,0.100000456609); +#249721 = AXIS2_PLACEMENT_3D('',#249722,#249723,#249724); +#249722 = CARTESIAN_POINT('',(138.25,-153.055,1.545)); +#249723 = DIRECTION('',(-0.,0.,-1.)); +#249724 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249725 = ORIENTED_EDGE('',*,*,#249726,.F.); +#249726 = EDGE_CURVE('',#249727,#249718,#249729,.T.); +#249727 = VERTEX_POINT('',#249728); +#249728 = CARTESIAN_POINT('',(138.151921,-153.074509,1.51)); +#249729 = LINE('',#249730,#249731); +#249730 = CARTESIAN_POINT('',(138.151921,-153.074509,1.51)); +#249731 = VECTOR('',#249732,1.); +#249732 = DIRECTION('',(0.,0.,1.)); +#249733 = ORIENTED_EDGE('',*,*,#249734,.F.); +#249734 = EDGE_CURVE('',#249695,#249727,#249735,.T.); +#249735 = CIRCLE('',#249736,0.100000456609); +#249736 = AXIS2_PLACEMENT_3D('',#249737,#249738,#249739); +#249737 = CARTESIAN_POINT('',(138.25,-153.055,1.51)); +#249738 = DIRECTION('',(-0.,0.,-1.)); +#249739 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249740 = CYLINDRICAL_SURFACE('',#249741,0.100000456609); +#249741 = AXIS2_PLACEMENT_3D('',#249742,#249743,#249744); +#249742 = CARTESIAN_POINT('',(138.25,-153.055,1.51)); +#249743 = DIRECTION('',(-0.,0.,-1.)); +#249744 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249745 = ADVANCED_FACE('',(#249746),#249771,.T.); +#249746 = FACE_BOUND('',#249747,.T.); +#249747 = EDGE_LOOP('',(#249748,#249749,#249757,#249765)); +#249748 = ORIENTED_EDGE('',*,*,#249726,.T.); +#249749 = ORIENTED_EDGE('',*,*,#249750,.T.); +#249750 = EDGE_CURVE('',#249718,#249751,#249753,.T.); +#249751 = VERTEX_POINT('',#249752); +#249752 = CARTESIAN_POINT('',(138.15,-152.041422,1.545)); +#249753 = LINE('',#249754,#249755); +#249754 = CARTESIAN_POINT('',(138.151921,-153.074509,1.545)); +#249755 = VECTOR('',#249756,1.); +#249756 = DIRECTION('',(-1.859472318322E-03,0.99999827118,0.)); +#249757 = ORIENTED_EDGE('',*,*,#249758,.F.); +#249758 = EDGE_CURVE('',#249759,#249751,#249761,.T.); +#249759 = VERTEX_POINT('',#249760); +#249760 = CARTESIAN_POINT('',(138.15,-152.041422,1.51)); +#249761 = LINE('',#249762,#249763); +#249762 = CARTESIAN_POINT('',(138.15,-152.041422,1.51)); +#249763 = VECTOR('',#249764,1.); +#249764 = DIRECTION('',(0.,0.,1.)); +#249765 = ORIENTED_EDGE('',*,*,#249766,.F.); +#249766 = EDGE_CURVE('',#249727,#249759,#249767,.T.); +#249767 = LINE('',#249768,#249769); +#249768 = CARTESIAN_POINT('',(138.151921,-153.074509,1.51)); +#249769 = VECTOR('',#249770,1.); +#249770 = DIRECTION('',(-1.859472318322E-03,0.99999827118,0.)); +#249771 = PLANE('',#249772); +#249772 = AXIS2_PLACEMENT_3D('',#249773,#249774,#249775); +#249773 = CARTESIAN_POINT('',(138.151921,-153.074509,1.51)); +#249774 = DIRECTION('',(-0.99999827118,-1.859472318322E-03,0.)); +#249775 = DIRECTION('',(-1.859472318322E-03,0.99999827118,0.)); +#249776 = ADVANCED_FACE('',(#249777),#249802,.T.); +#249777 = FACE_BOUND('',#249778,.T.); +#249778 = EDGE_LOOP('',(#249779,#249780,#249788,#249796)); +#249779 = ORIENTED_EDGE('',*,*,#249758,.T.); +#249780 = ORIENTED_EDGE('',*,*,#249781,.T.); +#249781 = EDGE_CURVE('',#249751,#249782,#249784,.T.); +#249782 = VERTEX_POINT('',#249783); +#249783 = CARTESIAN_POINT('',(137.708578,-151.6,1.545)); +#249784 = LINE('',#249785,#249786); +#249785 = CARTESIAN_POINT('',(138.15,-152.041422,1.545)); +#249786 = VECTOR('',#249787,1.); +#249787 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#249788 = ORIENTED_EDGE('',*,*,#249789,.F.); +#249789 = EDGE_CURVE('',#249790,#249782,#249792,.T.); +#249790 = VERTEX_POINT('',#249791); +#249791 = CARTESIAN_POINT('',(137.708578,-151.6,1.51)); +#249792 = LINE('',#249793,#249794); +#249793 = CARTESIAN_POINT('',(137.708578,-151.6,1.51)); +#249794 = VECTOR('',#249795,1.); +#249795 = DIRECTION('',(0.,0.,1.)); +#249796 = ORIENTED_EDGE('',*,*,#249797,.F.); +#249797 = EDGE_CURVE('',#249759,#249790,#249798,.T.); +#249798 = LINE('',#249799,#249800); +#249799 = CARTESIAN_POINT('',(138.15,-152.041422,1.51)); +#249800 = VECTOR('',#249801,1.); +#249801 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#249802 = PLANE('',#249803); +#249803 = AXIS2_PLACEMENT_3D('',#249804,#249805,#249806); +#249804 = CARTESIAN_POINT('',(138.15,-152.041422,1.51)); +#249805 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#249806 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#249807 = ADVANCED_FACE('',(#249808),#249833,.T.); +#249808 = FACE_BOUND('',#249809,.T.); +#249809 = EDGE_LOOP('',(#249810,#249811,#249819,#249827)); +#249810 = ORIENTED_EDGE('',*,*,#249789,.T.); +#249811 = ORIENTED_EDGE('',*,*,#249812,.T.); +#249812 = EDGE_CURVE('',#249782,#249813,#249815,.T.); +#249813 = VERTEX_POINT('',#249814); +#249814 = CARTESIAN_POINT('',(137.35,-151.6,1.545)); +#249815 = LINE('',#249816,#249817); +#249816 = CARTESIAN_POINT('',(137.708578,-151.6,1.545)); +#249817 = VECTOR('',#249818,1.); +#249818 = DIRECTION('',(-1.,0.,0.)); +#249819 = ORIENTED_EDGE('',*,*,#249820,.F.); +#249820 = EDGE_CURVE('',#249821,#249813,#249823,.T.); +#249821 = VERTEX_POINT('',#249822); +#249822 = CARTESIAN_POINT('',(137.35,-151.6,1.51)); +#249823 = LINE('',#249824,#249825); +#249824 = CARTESIAN_POINT('',(137.35,-151.6,1.51)); +#249825 = VECTOR('',#249826,1.); +#249826 = DIRECTION('',(0.,0.,1.)); +#249827 = ORIENTED_EDGE('',*,*,#249828,.F.); +#249828 = EDGE_CURVE('',#249790,#249821,#249829,.T.); +#249829 = LINE('',#249830,#249831); +#249830 = CARTESIAN_POINT('',(137.708578,-151.6,1.51)); +#249831 = VECTOR('',#249832,1.); +#249832 = DIRECTION('',(-1.,0.,0.)); +#249833 = PLANE('',#249834); +#249834 = AXIS2_PLACEMENT_3D('',#249835,#249836,#249837); +#249835 = CARTESIAN_POINT('',(137.708578,-151.6,1.51)); +#249836 = DIRECTION('',(0.,-1.,0.)); +#249837 = DIRECTION('',(-1.,0.,0.)); +#249838 = ADVANCED_FACE('',(#249839),#249864,.T.); +#249839 = FACE_BOUND('',#249840,.T.); +#249840 = EDGE_LOOP('',(#249841,#249842,#249850,#249858)); +#249841 = ORIENTED_EDGE('',*,*,#249820,.T.); +#249842 = ORIENTED_EDGE('',*,*,#249843,.T.); +#249843 = EDGE_CURVE('',#249813,#249844,#249846,.T.); +#249844 = VERTEX_POINT('',#249845); +#249845 = CARTESIAN_POINT('',(137.348079,-153.074509,1.545)); +#249846 = LINE('',#249847,#249848); +#249847 = CARTESIAN_POINT('',(137.35,-151.6,1.545)); +#249848 = VECTOR('',#249849,1.); +#249849 = DIRECTION('',(-1.30280545573E-03,-0.999999151349,0.)); +#249850 = ORIENTED_EDGE('',*,*,#249851,.F.); +#249851 = EDGE_CURVE('',#249852,#249844,#249854,.T.); +#249852 = VERTEX_POINT('',#249853); +#249853 = CARTESIAN_POINT('',(137.348079,-153.074509,1.51)); +#249854 = LINE('',#249855,#249856); +#249855 = CARTESIAN_POINT('',(137.348079,-153.074509,1.51)); +#249856 = VECTOR('',#249857,1.); +#249857 = DIRECTION('',(0.,0.,1.)); +#249858 = ORIENTED_EDGE('',*,*,#249859,.F.); +#249859 = EDGE_CURVE('',#249821,#249852,#249860,.T.); +#249860 = LINE('',#249861,#249862); +#249861 = CARTESIAN_POINT('',(137.35,-151.6,1.51)); +#249862 = VECTOR('',#249863,1.); +#249863 = DIRECTION('',(-1.30280545573E-03,-0.999999151349,0.)); +#249864 = PLANE('',#249865); +#249865 = AXIS2_PLACEMENT_3D('',#249866,#249867,#249868); +#249866 = CARTESIAN_POINT('',(137.35,-151.6,1.51)); +#249867 = DIRECTION('',(0.999999151349,-1.30280545573E-03,0.)); +#249868 = DIRECTION('',(-1.30280545573E-03,-0.999999151349,0.)); +#249869 = ADVANCED_FACE('',(#249870),#249897,.T.); +#249870 = FACE_BOUND('',#249871,.T.); +#249871 = EDGE_LOOP('',(#249872,#249873,#249882,#249890)); +#249872 = ORIENTED_EDGE('',*,*,#249851,.T.); +#249873 = ORIENTED_EDGE('',*,*,#249874,.T.); +#249874 = EDGE_CURVE('',#249844,#249875,#249877,.T.); +#249875 = VERTEX_POINT('',#249876); +#249876 = CARTESIAN_POINT('',(137.151921,-153.074509,1.545)); +#249877 = CIRCLE('',#249878,0.100000456609); +#249878 = AXIS2_PLACEMENT_3D('',#249879,#249880,#249881); +#249879 = CARTESIAN_POINT('',(137.25,-153.055,1.545)); +#249880 = DIRECTION('',(-0.,0.,-1.)); +#249881 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249882 = ORIENTED_EDGE('',*,*,#249883,.F.); +#249883 = EDGE_CURVE('',#249884,#249875,#249886,.T.); +#249884 = VERTEX_POINT('',#249885); +#249885 = CARTESIAN_POINT('',(137.151921,-153.074509,1.51)); +#249886 = LINE('',#249887,#249888); +#249887 = CARTESIAN_POINT('',(137.151921,-153.074509,1.51)); +#249888 = VECTOR('',#249889,1.); +#249889 = DIRECTION('',(0.,0.,1.)); +#249890 = ORIENTED_EDGE('',*,*,#249891,.F.); +#249891 = EDGE_CURVE('',#249852,#249884,#249892,.T.); +#249892 = CIRCLE('',#249893,0.100000456609); +#249893 = AXIS2_PLACEMENT_3D('',#249894,#249895,#249896); +#249894 = CARTESIAN_POINT('',(137.25,-153.055,1.51)); +#249895 = DIRECTION('',(-0.,0.,-1.)); +#249896 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249897 = CYLINDRICAL_SURFACE('',#249898,0.100000456609); +#249898 = AXIS2_PLACEMENT_3D('',#249899,#249900,#249901); +#249899 = CARTESIAN_POINT('',(137.25,-153.055,1.51)); +#249900 = DIRECTION('',(-0.,0.,-1.)); +#249901 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#249902 = ADVANCED_FACE('',(#249903),#249928,.T.); +#249903 = FACE_BOUND('',#249904,.T.); +#249904 = EDGE_LOOP('',(#249905,#249906,#249914,#249922)); +#249905 = ORIENTED_EDGE('',*,*,#249883,.T.); +#249906 = ORIENTED_EDGE('',*,*,#249907,.T.); +#249907 = EDGE_CURVE('',#249875,#249908,#249910,.T.); +#249908 = VERTEX_POINT('',#249909); +#249909 = CARTESIAN_POINT('',(137.15,-151.6,1.545)); +#249910 = LINE('',#249911,#249912); +#249911 = CARTESIAN_POINT('',(137.151921,-153.074509,1.545)); +#249912 = VECTOR('',#249913,1.); +#249913 = DIRECTION('',(-1.30280545573E-03,0.999999151349,0.)); +#249914 = ORIENTED_EDGE('',*,*,#249915,.F.); +#249915 = EDGE_CURVE('',#249916,#249908,#249918,.T.); +#249916 = VERTEX_POINT('',#249917); +#249917 = CARTESIAN_POINT('',(137.15,-151.6,1.51)); +#249918 = LINE('',#249919,#249920); +#249919 = CARTESIAN_POINT('',(137.15,-151.6,1.51)); +#249920 = VECTOR('',#249921,1.); +#249921 = DIRECTION('',(0.,0.,1.)); +#249922 = ORIENTED_EDGE('',*,*,#249923,.F.); +#249923 = EDGE_CURVE('',#249884,#249916,#249924,.T.); +#249924 = LINE('',#249925,#249926); +#249925 = CARTESIAN_POINT('',(137.151921,-153.074509,1.51)); +#249926 = VECTOR('',#249927,1.); +#249927 = DIRECTION('',(-1.30280545573E-03,0.999999151349,0.)); +#249928 = PLANE('',#249929); +#249929 = AXIS2_PLACEMENT_3D('',#249930,#249931,#249932); +#249930 = CARTESIAN_POINT('',(137.151921,-153.074509,1.51)); +#249931 = DIRECTION('',(-0.999999151349,-1.30280545573E-03,0.)); +#249932 = DIRECTION('',(-1.30280545573E-03,0.999999151349,0.)); +#249933 = ADVANCED_FACE('',(#249934),#249959,.T.); +#249934 = FACE_BOUND('',#249935,.T.); +#249935 = EDGE_LOOP('',(#249936,#249937,#249945,#249953)); +#249936 = ORIENTED_EDGE('',*,*,#249915,.T.); +#249937 = ORIENTED_EDGE('',*,*,#249938,.T.); +#249938 = EDGE_CURVE('',#249908,#249939,#249941,.T.); +#249939 = VERTEX_POINT('',#249940); +#249940 = CARTESIAN_POINT('',(131.102498,-151.6,1.545)); +#249941 = LINE('',#249942,#249943); +#249942 = CARTESIAN_POINT('',(137.15,-151.6,1.545)); +#249943 = VECTOR('',#249944,1.); +#249944 = DIRECTION('',(-1.,0.,0.)); +#249945 = ORIENTED_EDGE('',*,*,#249946,.F.); +#249946 = EDGE_CURVE('',#249947,#249939,#249949,.T.); +#249947 = VERTEX_POINT('',#249948); +#249948 = CARTESIAN_POINT('',(131.102498,-151.6,1.51)); +#249949 = LINE('',#249950,#249951); +#249950 = CARTESIAN_POINT('',(131.102498,-151.6,1.51)); +#249951 = VECTOR('',#249952,1.); +#249952 = DIRECTION('',(0.,0.,1.)); +#249953 = ORIENTED_EDGE('',*,*,#249954,.F.); +#249954 = EDGE_CURVE('',#249916,#249947,#249955,.T.); +#249955 = LINE('',#249956,#249957); +#249956 = CARTESIAN_POINT('',(137.15,-151.6,1.51)); +#249957 = VECTOR('',#249958,1.); +#249958 = DIRECTION('',(-1.,0.,0.)); +#249959 = PLANE('',#249960); +#249960 = AXIS2_PLACEMENT_3D('',#249961,#249962,#249963); +#249961 = CARTESIAN_POINT('',(137.15,-151.6,1.51)); +#249962 = DIRECTION('',(0.,-1.,0.)); +#249963 = DIRECTION('',(-1.,0.,0.)); +#249964 = ADVANCED_FACE('',(#249965),#249990,.T.); +#249965 = FACE_BOUND('',#249966,.T.); +#249966 = EDGE_LOOP('',(#249967,#249968,#249976,#249984)); +#249967 = ORIENTED_EDGE('',*,*,#249946,.T.); +#249968 = ORIENTED_EDGE('',*,*,#249969,.T.); +#249969 = EDGE_CURVE('',#249939,#249970,#249972,.T.); +#249970 = VERTEX_POINT('',#249971); +#249971 = CARTESIAN_POINT('',(129.73,-152.972498,1.545)); +#249972 = LINE('',#249973,#249974); +#249973 = CARTESIAN_POINT('',(131.102498,-151.6,1.545)); +#249974 = VECTOR('',#249975,1.); +#249975 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#249976 = ORIENTED_EDGE('',*,*,#249977,.F.); +#249977 = EDGE_CURVE('',#249978,#249970,#249980,.T.); +#249978 = VERTEX_POINT('',#249979); +#249979 = CARTESIAN_POINT('',(129.73,-152.972498,1.51)); +#249980 = LINE('',#249981,#249982); +#249981 = CARTESIAN_POINT('',(129.73,-152.972498,1.51)); +#249982 = VECTOR('',#249983,1.); +#249983 = DIRECTION('',(0.,0.,1.)); +#249984 = ORIENTED_EDGE('',*,*,#249985,.F.); +#249985 = EDGE_CURVE('',#249947,#249978,#249986,.T.); +#249986 = LINE('',#249987,#249988); +#249987 = CARTESIAN_POINT('',(131.102498,-151.6,1.51)); +#249988 = VECTOR('',#249989,1.); +#249989 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#249990 = PLANE('',#249991); +#249991 = AXIS2_PLACEMENT_3D('',#249992,#249993,#249994); +#249992 = CARTESIAN_POINT('',(131.102498,-151.6,1.51)); +#249993 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#249994 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#249995 = ADVANCED_FACE('',(#249996),#250021,.T.); +#249996 = FACE_BOUND('',#249997,.T.); +#249997 = EDGE_LOOP('',(#249998,#249999,#250007,#250015)); +#249998 = ORIENTED_EDGE('',*,*,#249977,.T.); +#249999 = ORIENTED_EDGE('',*,*,#250000,.T.); +#250000 = EDGE_CURVE('',#249970,#250001,#250003,.T.); +#250001 = VERTEX_POINT('',#250002); +#250002 = CARTESIAN_POINT('',(129.728079,-153.659509,1.545)); +#250003 = LINE('',#250004,#250005); +#250004 = CARTESIAN_POINT('',(129.73,-152.972498,1.545)); +#250005 = VECTOR('',#250006,1.); +#250006 = DIRECTION('',(-2.796159727121E-03,-0.999996090738,0.)); +#250007 = ORIENTED_EDGE('',*,*,#250008,.F.); +#250008 = EDGE_CURVE('',#250009,#250001,#250011,.T.); +#250009 = VERTEX_POINT('',#250010); +#250010 = CARTESIAN_POINT('',(129.728079,-153.659509,1.51)); +#250011 = LINE('',#250012,#250013); +#250012 = CARTESIAN_POINT('',(129.728079,-153.659509,1.51)); +#250013 = VECTOR('',#250014,1.); +#250014 = DIRECTION('',(0.,0.,1.)); +#250015 = ORIENTED_EDGE('',*,*,#250016,.F.); +#250016 = EDGE_CURVE('',#249978,#250009,#250017,.T.); +#250017 = LINE('',#250018,#250019); +#250018 = CARTESIAN_POINT('',(129.73,-152.972498,1.51)); +#250019 = VECTOR('',#250020,1.); +#250020 = DIRECTION('',(-2.796159727121E-03,-0.999996090738,0.)); +#250021 = PLANE('',#250022); +#250022 = AXIS2_PLACEMENT_3D('',#250023,#250024,#250025); +#250023 = CARTESIAN_POINT('',(129.73,-152.972498,1.51)); +#250024 = DIRECTION('',(0.999996090738,-2.796159727121E-03,0.)); +#250025 = DIRECTION('',(-2.796159727121E-03,-0.999996090738,0.)); +#250026 = ADVANCED_FACE('',(#250027),#250052,.T.); +#250027 = FACE_BOUND('',#250028,.T.); +#250028 = EDGE_LOOP('',(#250029,#250030,#250038,#250046)); +#250029 = ORIENTED_EDGE('',*,*,#250008,.T.); +#250030 = ORIENTED_EDGE('',*,*,#250031,.T.); +#250031 = EDGE_CURVE('',#250001,#250032,#250034,.T.); +#250032 = VERTEX_POINT('',#250033); +#250033 = CARTESIAN_POINT('',(129.713148,-153.695557,1.545)); +#250034 = LINE('',#250035,#250036); +#250035 = CARTESIAN_POINT('',(129.728079,-153.659509,1.545)); +#250036 = VECTOR('',#250037,1.); +#250037 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#250038 = ORIENTED_EDGE('',*,*,#250039,.F.); +#250039 = EDGE_CURVE('',#250040,#250032,#250042,.T.); +#250040 = VERTEX_POINT('',#250041); +#250041 = CARTESIAN_POINT('',(129.713148,-153.695557,1.51)); +#250042 = LINE('',#250043,#250044); +#250043 = CARTESIAN_POINT('',(129.713148,-153.695557,1.51)); +#250044 = VECTOR('',#250045,1.); +#250045 = DIRECTION('',(0.,0.,1.)); +#250046 = ORIENTED_EDGE('',*,*,#250047,.F.); +#250047 = EDGE_CURVE('',#250009,#250040,#250048,.T.); +#250048 = LINE('',#250049,#250050); +#250049 = CARTESIAN_POINT('',(129.728079,-153.659509,1.51)); +#250050 = VECTOR('',#250051,1.); +#250051 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#250052 = PLANE('',#250053); +#250053 = AXIS2_PLACEMENT_3D('',#250054,#250055,#250056); +#250054 = CARTESIAN_POINT('',(129.728079,-153.659509,1.51)); +#250055 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#250056 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#250057 = ADVANCED_FACE('',(#250058),#250083,.T.); +#250058 = FACE_BOUND('',#250059,.T.); +#250059 = EDGE_LOOP('',(#250060,#250061,#250069,#250077)); +#250060 = ORIENTED_EDGE('',*,*,#250039,.T.); +#250061 = ORIENTED_EDGE('',*,*,#250062,.T.); +#250062 = EDGE_CURVE('',#250032,#250063,#250065,.T.); +#250063 = VERTEX_POINT('',#250064); +#250064 = CARTESIAN_POINT('',(129.055557,-154.353147,1.545)); +#250065 = LINE('',#250066,#250067); +#250066 = CARTESIAN_POINT('',(129.713148,-153.695557,1.545)); +#250067 = VECTOR('',#250068,1.); +#250068 = DIRECTION('',(-0.707107318836,-0.707106243537,0.)); +#250069 = ORIENTED_EDGE('',*,*,#250070,.F.); +#250070 = EDGE_CURVE('',#250071,#250063,#250073,.T.); +#250071 = VERTEX_POINT('',#250072); +#250072 = CARTESIAN_POINT('',(129.055557,-154.353147,1.51)); +#250073 = LINE('',#250074,#250075); +#250074 = CARTESIAN_POINT('',(129.055557,-154.353147,1.51)); +#250075 = VECTOR('',#250076,1.); +#250076 = DIRECTION('',(0.,0.,1.)); +#250077 = ORIENTED_EDGE('',*,*,#250078,.F.); +#250078 = EDGE_CURVE('',#250040,#250071,#250079,.T.); +#250079 = LINE('',#250080,#250081); +#250080 = CARTESIAN_POINT('',(129.713148,-153.695557,1.51)); +#250081 = VECTOR('',#250082,1.); +#250082 = DIRECTION('',(-0.707107318836,-0.707106243537,0.)); +#250083 = PLANE('',#250084); +#250084 = AXIS2_PLACEMENT_3D('',#250085,#250086,#250087); +#250085 = CARTESIAN_POINT('',(129.713148,-153.695557,1.51)); +#250086 = DIRECTION('',(0.707106243537,-0.707107318836,0.)); +#250087 = DIRECTION('',(-0.707107318836,-0.707106243537,0.)); +#250088 = ADVANCED_FACE('',(#250089),#250116,.T.); +#250089 = FACE_BOUND('',#250090,.T.); +#250090 = EDGE_LOOP('',(#250091,#250092,#250101,#250109)); +#250091 = ORIENTED_EDGE('',*,*,#250070,.T.); +#250092 = ORIENTED_EDGE('',*,*,#250093,.T.); +#250093 = EDGE_CURVE('',#250063,#250094,#250096,.T.); +#250094 = VERTEX_POINT('',#250095); +#250095 = CARTESIAN_POINT('',(128.916853,-154.214443,1.545)); +#250096 = CIRCLE('',#250097,0.10000001929); +#250097 = AXIS2_PLACEMENT_3D('',#250098,#250099,#250100); +#250098 = CARTESIAN_POINT('',(129.,-154.27,1.545)); +#250099 = DIRECTION('',(0.,0.,-1.)); +#250100 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#250101 = ORIENTED_EDGE('',*,*,#250102,.F.); +#250102 = EDGE_CURVE('',#250103,#250094,#250105,.T.); +#250103 = VERTEX_POINT('',#250104); +#250104 = CARTESIAN_POINT('',(128.916853,-154.214443,1.51)); +#250105 = LINE('',#250106,#250107); +#250106 = CARTESIAN_POINT('',(128.916853,-154.214443,1.51)); +#250107 = VECTOR('',#250108,1.); +#250108 = DIRECTION('',(0.,0.,1.)); +#250109 = ORIENTED_EDGE('',*,*,#250110,.F.); +#250110 = EDGE_CURVE('',#250071,#250103,#250111,.T.); +#250111 = CIRCLE('',#250112,0.10000001929); +#250112 = AXIS2_PLACEMENT_3D('',#250113,#250114,#250115); +#250113 = CARTESIAN_POINT('',(129.,-154.27,1.51)); +#250114 = DIRECTION('',(0.,0.,-1.)); +#250115 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#250116 = CYLINDRICAL_SURFACE('',#250117,0.10000001929); +#250117 = AXIS2_PLACEMENT_3D('',#250118,#250119,#250120); +#250118 = CARTESIAN_POINT('',(129.,-154.27,1.51)); +#250119 = DIRECTION('',(0.,0.,-1.)); +#250120 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#250121 = ADVANCED_FACE('',(#250122),#250147,.T.); +#250122 = FACE_BOUND('',#250123,.T.); +#250123 = EDGE_LOOP('',(#250124,#250125,#250133,#250141)); +#250124 = ORIENTED_EDGE('',*,*,#250102,.T.); +#250125 = ORIENTED_EDGE('',*,*,#250126,.T.); +#250126 = EDGE_CURVE('',#250094,#250127,#250129,.T.); +#250127 = VERTEX_POINT('',#250128); +#250128 = CARTESIAN_POINT('',(129.53,-153.598578,1.545)); +#250129 = LINE('',#250130,#250131); +#250130 = CARTESIAN_POINT('',(128.916853,-154.214443,1.545)); +#250131 = VECTOR('',#250132,1.); +#250132 = DIRECTION('',(0.705541266193,0.708668837821,0.)); +#250133 = ORIENTED_EDGE('',*,*,#250134,.F.); +#250134 = EDGE_CURVE('',#250135,#250127,#250137,.T.); +#250135 = VERTEX_POINT('',#250136); +#250136 = CARTESIAN_POINT('',(129.53,-153.598578,1.51)); +#250137 = LINE('',#250138,#250139); +#250138 = CARTESIAN_POINT('',(129.53,-153.598578,1.51)); +#250139 = VECTOR('',#250140,1.); +#250140 = DIRECTION('',(0.,0.,1.)); +#250141 = ORIENTED_EDGE('',*,*,#250142,.F.); +#250142 = EDGE_CURVE('',#250103,#250135,#250143,.T.); +#250143 = LINE('',#250144,#250145); +#250144 = CARTESIAN_POINT('',(128.916853,-154.214443,1.51)); +#250145 = VECTOR('',#250146,1.); +#250146 = DIRECTION('',(0.705541266193,0.708668837821,0.)); +#250147 = PLANE('',#250148); +#250148 = AXIS2_PLACEMENT_3D('',#250149,#250150,#250151); +#250149 = CARTESIAN_POINT('',(128.916853,-154.214443,1.51)); +#250150 = DIRECTION('',(-0.708668837821,0.705541266193,0.)); +#250151 = DIRECTION('',(0.705541266193,0.708668837821,0.)); +#250152 = ADVANCED_FACE('',(#250153),#250178,.T.); +#250153 = FACE_BOUND('',#250154,.T.); +#250154 = EDGE_LOOP('',(#250155,#250156,#250164,#250172)); +#250155 = ORIENTED_EDGE('',*,*,#250134,.T.); +#250156 = ORIENTED_EDGE('',*,*,#250157,.T.); +#250157 = EDGE_CURVE('',#250127,#250158,#250160,.T.); +#250158 = VERTEX_POINT('',#250159); +#250159 = CARTESIAN_POINT('',(129.531921,-152.911567,1.545)); +#250160 = LINE('',#250161,#250162); +#250161 = CARTESIAN_POINT('',(129.53,-153.598578,1.545)); +#250162 = VECTOR('',#250163,1.); +#250163 = DIRECTION('',(2.796159727162E-03,0.999996090738,0.)); +#250164 = ORIENTED_EDGE('',*,*,#250165,.F.); +#250165 = EDGE_CURVE('',#250166,#250158,#250168,.T.); +#250166 = VERTEX_POINT('',#250167); +#250167 = CARTESIAN_POINT('',(129.531921,-152.911567,1.51)); +#250168 = LINE('',#250169,#250170); +#250169 = CARTESIAN_POINT('',(129.531921,-152.911567,1.51)); +#250170 = VECTOR('',#250171,1.); +#250171 = DIRECTION('',(0.,0.,1.)); +#250172 = ORIENTED_EDGE('',*,*,#250173,.F.); +#250173 = EDGE_CURVE('',#250135,#250166,#250174,.T.); +#250174 = LINE('',#250175,#250176); +#250175 = CARTESIAN_POINT('',(129.53,-153.598578,1.51)); +#250176 = VECTOR('',#250177,1.); +#250177 = DIRECTION('',(2.796159727162E-03,0.999996090738,0.)); +#250178 = PLANE('',#250179); +#250179 = AXIS2_PLACEMENT_3D('',#250180,#250181,#250182); +#250180 = CARTESIAN_POINT('',(129.53,-153.598578,1.51)); +#250181 = DIRECTION('',(-0.999996090738,2.796159727162E-03,0.)); +#250182 = DIRECTION('',(2.796159727162E-03,0.999996090738,0.)); +#250183 = ADVANCED_FACE('',(#250184),#250209,.T.); +#250184 = FACE_BOUND('',#250185,.T.); +#250185 = EDGE_LOOP('',(#250186,#250187,#250195,#250203)); +#250186 = ORIENTED_EDGE('',*,*,#250165,.T.); +#250187 = ORIENTED_EDGE('',*,*,#250188,.T.); +#250188 = EDGE_CURVE('',#250158,#250189,#250191,.T.); +#250189 = VERTEX_POINT('',#250190); +#250190 = CARTESIAN_POINT('',(129.546853,-152.875519,1.545)); +#250191 = LINE('',#250192,#250193); +#250192 = CARTESIAN_POINT('',(129.531921,-152.911567,1.545)); +#250193 = VECTOR('',#250194,1.); +#250194 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#250195 = ORIENTED_EDGE('',*,*,#250196,.F.); +#250196 = EDGE_CURVE('',#250197,#250189,#250199,.T.); +#250197 = VERTEX_POINT('',#250198); +#250198 = CARTESIAN_POINT('',(129.546853,-152.875519,1.51)); +#250199 = LINE('',#250200,#250201); +#250200 = CARTESIAN_POINT('',(129.546853,-152.875519,1.51)); +#250201 = VECTOR('',#250202,1.); +#250202 = DIRECTION('',(0.,0.,1.)); +#250203 = ORIENTED_EDGE('',*,*,#250204,.F.); +#250204 = EDGE_CURVE('',#250166,#250197,#250205,.T.); +#250205 = LINE('',#250206,#250207); +#250206 = CARTESIAN_POINT('',(129.531921,-152.911567,1.51)); +#250207 = VECTOR('',#250208,1.); +#250208 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#250209 = PLANE('',#250210); +#250210 = AXIS2_PLACEMENT_3D('',#250211,#250212,#250213); +#250211 = CARTESIAN_POINT('',(129.531921,-152.911567,1.51)); +#250212 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#250213 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#250214 = ADVANCED_FACE('',(#250215),#250231,.T.); +#250215 = FACE_BOUND('',#250216,.T.); +#250216 = EDGE_LOOP('',(#250217,#250218,#250224,#250225)); +#250217 = ORIENTED_EDGE('',*,*,#250196,.T.); +#250218 = ORIENTED_EDGE('',*,*,#250219,.T.); +#250219 = EDGE_CURVE('',#250189,#249493,#250220,.T.); +#250220 = LINE('',#250221,#250222); +#250221 = CARTESIAN_POINT('',(129.546853,-152.875519,1.545)); +#250222 = VECTOR('',#250223,1.); +#250223 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#250224 = ORIENTED_EDGE('',*,*,#249490,.F.); +#250225 = ORIENTED_EDGE('',*,*,#250226,.F.); +#250226 = EDGE_CURVE('',#250197,#249491,#250227,.T.); +#250227 = LINE('',#250228,#250229); +#250228 = CARTESIAN_POINT('',(129.546853,-152.875519,1.51)); +#250229 = VECTOR('',#250230,1.); +#250230 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#250231 = PLANE('',#250232); +#250232 = AXIS2_PLACEMENT_3D('',#250233,#250234,#250235); +#250233 = CARTESIAN_POINT('',(129.546853,-152.875519,1.51)); +#250234 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#250235 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#250236 = ADVANCED_FACE('',(#250237),#250263,.F.); +#250237 = FACE_BOUND('',#250238,.T.); +#250238 = EDGE_LOOP('',(#250239,#250240,#250241,#250242,#250243,#250244, + #250245,#250246,#250247,#250248,#250249,#250250,#250251,#250252, + #250253,#250254,#250255,#250256,#250257,#250258,#250259,#250260, + #250261,#250262)); +#250239 = ORIENTED_EDGE('',*,*,#249516,.T.); +#250240 = ORIENTED_EDGE('',*,*,#249547,.T.); +#250241 = ORIENTED_EDGE('',*,*,#249578,.T.); +#250242 = ORIENTED_EDGE('',*,*,#249609,.T.); +#250243 = ORIENTED_EDGE('',*,*,#249640,.T.); +#250244 = ORIENTED_EDGE('',*,*,#249671,.T.); +#250245 = ORIENTED_EDGE('',*,*,#249702,.T.); +#250246 = ORIENTED_EDGE('',*,*,#249734,.T.); +#250247 = ORIENTED_EDGE('',*,*,#249766,.T.); +#250248 = ORIENTED_EDGE('',*,*,#249797,.T.); +#250249 = ORIENTED_EDGE('',*,*,#249828,.T.); +#250250 = ORIENTED_EDGE('',*,*,#249859,.T.); +#250251 = ORIENTED_EDGE('',*,*,#249891,.T.); +#250252 = ORIENTED_EDGE('',*,*,#249923,.T.); +#250253 = ORIENTED_EDGE('',*,*,#249954,.T.); +#250254 = ORIENTED_EDGE('',*,*,#249985,.T.); +#250255 = ORIENTED_EDGE('',*,*,#250016,.T.); +#250256 = ORIENTED_EDGE('',*,*,#250047,.T.); +#250257 = ORIENTED_EDGE('',*,*,#250078,.T.); +#250258 = ORIENTED_EDGE('',*,*,#250110,.T.); +#250259 = ORIENTED_EDGE('',*,*,#250142,.T.); +#250260 = ORIENTED_EDGE('',*,*,#250173,.T.); +#250261 = ORIENTED_EDGE('',*,*,#250204,.T.); +#250262 = ORIENTED_EDGE('',*,*,#250226,.T.); +#250263 = PLANE('',#250264); +#250264 = AXIS2_PLACEMENT_3D('',#250265,#250266,#250267); +#250265 = CARTESIAN_POINT('',(0.,0.,1.51)); +#250266 = DIRECTION('',(0.,0.,1.)); +#250267 = DIRECTION('',(1.,0.,-0.)); +#250268 = ADVANCED_FACE('',(#250269),#250295,.T.); +#250269 = FACE_BOUND('',#250270,.F.); +#250270 = EDGE_LOOP('',(#250271,#250272,#250273,#250274,#250275,#250276, + #250277,#250278,#250279,#250280,#250281,#250282,#250283,#250284, + #250285,#250286,#250287,#250288,#250289,#250290,#250291,#250292, + #250293,#250294)); +#250271 = ORIENTED_EDGE('',*,*,#249500,.T.); +#250272 = ORIENTED_EDGE('',*,*,#249531,.T.); +#250273 = ORIENTED_EDGE('',*,*,#249562,.T.); +#250274 = ORIENTED_EDGE('',*,*,#249593,.T.); +#250275 = ORIENTED_EDGE('',*,*,#249624,.T.); +#250276 = ORIENTED_EDGE('',*,*,#249655,.T.); +#250277 = ORIENTED_EDGE('',*,*,#249686,.T.); +#250278 = ORIENTED_EDGE('',*,*,#249717,.T.); +#250279 = ORIENTED_EDGE('',*,*,#249750,.T.); +#250280 = ORIENTED_EDGE('',*,*,#249781,.T.); +#250281 = ORIENTED_EDGE('',*,*,#249812,.T.); +#250282 = ORIENTED_EDGE('',*,*,#249843,.T.); +#250283 = ORIENTED_EDGE('',*,*,#249874,.T.); +#250284 = ORIENTED_EDGE('',*,*,#249907,.T.); +#250285 = ORIENTED_EDGE('',*,*,#249938,.T.); +#250286 = ORIENTED_EDGE('',*,*,#249969,.T.); +#250287 = ORIENTED_EDGE('',*,*,#250000,.T.); +#250288 = ORIENTED_EDGE('',*,*,#250031,.T.); +#250289 = ORIENTED_EDGE('',*,*,#250062,.T.); +#250290 = ORIENTED_EDGE('',*,*,#250093,.T.); +#250291 = ORIENTED_EDGE('',*,*,#250126,.T.); +#250292 = ORIENTED_EDGE('',*,*,#250157,.T.); +#250293 = ORIENTED_EDGE('',*,*,#250188,.T.); +#250294 = ORIENTED_EDGE('',*,*,#250219,.T.); +#250295 = PLANE('',#250296); +#250296 = AXIS2_PLACEMENT_3D('',#250297,#250298,#250299); +#250297 = CARTESIAN_POINT('',(0.,0.,1.545)); +#250298 = DIRECTION('',(0.,0.,1.)); +#250299 = DIRECTION('',(1.,0.,-0.)); +#250300 = MANIFOLD_SOLID_BREP('',#250301); +#250301 = CLOSED_SHELL('',(#250302,#250344,#250375,#250406,#250437, + #250468,#250499,#250530,#250561,#250592,#250623,#250654,#250685, + #250716,#250747,#250778,#250809,#250840,#250871,#250902,#250935, + #250966,#250997,#251028,#251059,#251090,#251121,#251152,#251183, + #251214,#251245,#251276,#251307,#251338,#251369,#251400,#251431, + #251462,#251493,#251524,#251546,#251594)); +#250302 = ADVANCED_FACE('',(#250303),#250339,.T.); +#250303 = FACE_BOUND('',#250304,.T.); +#250304 = EDGE_LOOP('',(#250305,#250315,#250324,#250332)); +#250305 = ORIENTED_EDGE('',*,*,#250306,.T.); +#250306 = EDGE_CURVE('',#250307,#250309,#250311,.T.); +#250307 = VERTEX_POINT('',#250308); +#250308 = CARTESIAN_POINT('',(129.194443,-81.076853,1.51)); +#250309 = VERTEX_POINT('',#250310); +#250310 = CARTESIAN_POINT('',(129.194443,-81.076853,1.545)); +#250311 = LINE('',#250312,#250313); +#250312 = CARTESIAN_POINT('',(129.194443,-81.076853,1.51)); +#250313 = VECTOR('',#250314,1.); +#250314 = DIRECTION('',(0.,0.,1.)); +#250315 = ORIENTED_EDGE('',*,*,#250316,.T.); +#250316 = EDGE_CURVE('',#250309,#250317,#250319,.T.); +#250317 = VERTEX_POINT('',#250318); +#250318 = CARTESIAN_POINT('',(129.333147,-81.215557,1.545)); +#250319 = CIRCLE('',#250320,0.10000001929); +#250320 = AXIS2_PLACEMENT_3D('',#250321,#250322,#250323); +#250321 = CARTESIAN_POINT('',(129.25,-81.16,1.545)); +#250322 = DIRECTION('',(0.,0.,-1.)); +#250323 = DIRECTION('',(-0.55556989283,0.83146983961,0.)); +#250324 = ORIENTED_EDGE('',*,*,#250325,.F.); +#250325 = EDGE_CURVE('',#250326,#250317,#250328,.T.); +#250326 = VERTEX_POINT('',#250327); +#250327 = CARTESIAN_POINT('',(129.333147,-81.215557,1.51)); +#250328 = LINE('',#250329,#250330); +#250329 = CARTESIAN_POINT('',(129.333147,-81.215557,1.51)); +#250330 = VECTOR('',#250331,1.); +#250331 = DIRECTION('',(0.,0.,1.)); +#250332 = ORIENTED_EDGE('',*,*,#250333,.F.); +#250333 = EDGE_CURVE('',#250307,#250326,#250334,.T.); +#250334 = CIRCLE('',#250335,0.10000001929); +#250335 = AXIS2_PLACEMENT_3D('',#250336,#250337,#250338); +#250336 = CARTESIAN_POINT('',(129.25,-81.16,1.51)); +#250337 = DIRECTION('',(0.,0.,-1.)); +#250338 = DIRECTION('',(-0.55556989283,0.83146983961,0.)); +#250339 = CYLINDRICAL_SURFACE('',#250340,0.10000001929); +#250340 = AXIS2_PLACEMENT_3D('',#250341,#250342,#250343); +#250341 = CARTESIAN_POINT('',(129.25,-81.16,1.51)); +#250342 = DIRECTION('',(0.,0.,-1.)); +#250343 = DIRECTION('',(-0.55556989283,0.83146983961,0.)); +#250344 = ADVANCED_FACE('',(#250345),#250370,.T.); +#250345 = FACE_BOUND('',#250346,.T.); +#250346 = EDGE_LOOP('',(#250347,#250348,#250356,#250364)); +#250347 = ORIENTED_EDGE('',*,*,#250325,.T.); +#250348 = ORIENTED_EDGE('',*,*,#250349,.T.); +#250349 = EDGE_CURVE('',#250317,#250350,#250352,.T.); +#250350 = VERTEX_POINT('',#250351); +#250351 = CARTESIAN_POINT('',(127.95,-82.601422,1.545)); +#250352 = LINE('',#250353,#250354); +#250353 = CARTESIAN_POINT('',(129.333147,-81.215557,1.545)); +#250354 = VECTOR('',#250355,1.); +#250355 = DIRECTION('',(-0.706412360736,-0.707800520344,0.)); +#250356 = ORIENTED_EDGE('',*,*,#250357,.F.); +#250357 = EDGE_CURVE('',#250358,#250350,#250360,.T.); +#250358 = VERTEX_POINT('',#250359); +#250359 = CARTESIAN_POINT('',(127.95,-82.601422,1.51)); +#250360 = LINE('',#250361,#250362); +#250361 = CARTESIAN_POINT('',(127.95,-82.601422,1.51)); +#250362 = VECTOR('',#250363,1.); +#250363 = DIRECTION('',(0.,0.,1.)); +#250364 = ORIENTED_EDGE('',*,*,#250365,.F.); +#250365 = EDGE_CURVE('',#250326,#250358,#250366,.T.); +#250366 = LINE('',#250367,#250368); +#250367 = CARTESIAN_POINT('',(129.333147,-81.215557,1.51)); +#250368 = VECTOR('',#250369,1.); +#250369 = DIRECTION('',(-0.706412360736,-0.707800520344,0.)); +#250370 = PLANE('',#250371); +#250371 = AXIS2_PLACEMENT_3D('',#250372,#250373,#250374); +#250372 = CARTESIAN_POINT('',(129.333147,-81.215557,1.51)); +#250373 = DIRECTION('',(0.707800520344,-0.706412360736,0.)); +#250374 = DIRECTION('',(-0.706412360736,-0.707800520344,0.)); +#250375 = ADVANCED_FACE('',(#250376),#250401,.T.); +#250376 = FACE_BOUND('',#250377,.T.); +#250377 = EDGE_LOOP('',(#250378,#250379,#250387,#250395)); +#250378 = ORIENTED_EDGE('',*,*,#250357,.T.); +#250379 = ORIENTED_EDGE('',*,*,#250380,.T.); +#250380 = EDGE_CURVE('',#250350,#250381,#250383,.T.); +#250381 = VERTEX_POINT('',#250382); +#250382 = CARTESIAN_POINT('',(127.948079,-99.980867,1.545)); +#250383 = LINE('',#250384,#250385); +#250384 = CARTESIAN_POINT('',(127.95,-82.601422,1.545)); +#250385 = VECTOR('',#250386,1.); +#250386 = DIRECTION('',(-1.105328730728E-04,-0.999999993891,0.)); +#250387 = ORIENTED_EDGE('',*,*,#250388,.F.); +#250388 = EDGE_CURVE('',#250389,#250381,#250391,.T.); +#250389 = VERTEX_POINT('',#250390); +#250390 = CARTESIAN_POINT('',(127.948079,-99.980867,1.51)); +#250391 = LINE('',#250392,#250393); +#250392 = CARTESIAN_POINT('',(127.948079,-99.980867,1.51)); +#250393 = VECTOR('',#250394,1.); +#250394 = DIRECTION('',(0.,0.,1.)); +#250395 = ORIENTED_EDGE('',*,*,#250396,.F.); +#250396 = EDGE_CURVE('',#250358,#250389,#250397,.T.); +#250397 = LINE('',#250398,#250399); +#250398 = CARTESIAN_POINT('',(127.95,-82.601422,1.51)); +#250399 = VECTOR('',#250400,1.); +#250400 = DIRECTION('',(-1.105328730728E-04,-0.999999993891,0.)); +#250401 = PLANE('',#250402); +#250402 = AXIS2_PLACEMENT_3D('',#250403,#250404,#250405); +#250403 = CARTESIAN_POINT('',(127.95,-82.601422,1.51)); +#250404 = DIRECTION('',(0.999999993891,-1.105328730728E-04,0.)); +#250405 = DIRECTION('',(-1.105328730728E-04,-0.999999993891,0.)); +#250406 = ADVANCED_FACE('',(#250407),#250432,.T.); +#250407 = FACE_BOUND('',#250408,.T.); +#250408 = EDGE_LOOP('',(#250409,#250410,#250418,#250426)); +#250409 = ORIENTED_EDGE('',*,*,#250388,.T.); +#250410 = ORIENTED_EDGE('',*,*,#250411,.T.); +#250411 = EDGE_CURVE('',#250381,#250412,#250414,.T.); +#250412 = VERTEX_POINT('',#250413); +#250413 = CARTESIAN_POINT('',(127.933147,-100.016916,1.545)); +#250414 = LINE('',#250415,#250416); +#250415 = CARTESIAN_POINT('',(127.948079,-99.980867,1.545)); +#250416 = VECTOR('',#250417,1.); +#250417 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250418 = ORIENTED_EDGE('',*,*,#250419,.F.); +#250419 = EDGE_CURVE('',#250420,#250412,#250422,.T.); +#250420 = VERTEX_POINT('',#250421); +#250421 = CARTESIAN_POINT('',(127.933147,-100.016916,1.51)); +#250422 = LINE('',#250423,#250424); +#250423 = CARTESIAN_POINT('',(127.933147,-100.016916,1.51)); +#250424 = VECTOR('',#250425,1.); +#250425 = DIRECTION('',(0.,0.,1.)); +#250426 = ORIENTED_EDGE('',*,*,#250427,.F.); +#250427 = EDGE_CURVE('',#250389,#250420,#250428,.T.); +#250428 = LINE('',#250429,#250430); +#250429 = CARTESIAN_POINT('',(127.948079,-99.980867,1.51)); +#250430 = VECTOR('',#250431,1.); +#250431 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250432 = PLANE('',#250433); +#250433 = AXIS2_PLACEMENT_3D('',#250434,#250435,#250436); +#250434 = CARTESIAN_POINT('',(127.948079,-99.980867,1.51)); +#250435 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#250436 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250437 = ADVANCED_FACE('',(#250438),#250463,.T.); +#250438 = FACE_BOUND('',#250439,.T.); +#250439 = EDGE_LOOP('',(#250440,#250441,#250449,#250457)); +#250440 = ORIENTED_EDGE('',*,*,#250419,.T.); +#250441 = ORIENTED_EDGE('',*,*,#250442,.T.); +#250442 = EDGE_CURVE('',#250412,#250443,#250445,.T.); +#250443 = VERTEX_POINT('',#250444); +#250444 = CARTESIAN_POINT('',(123.911358,-104.041421,1.545)); +#250445 = LINE('',#250446,#250447); +#250446 = CARTESIAN_POINT('',(127.933147,-100.016916,1.545)); +#250447 = VECTOR('',#250448,1.); +#250448 = DIRECTION('',(-0.706868059355,-0.707345422452,0.)); +#250449 = ORIENTED_EDGE('',*,*,#250450,.F.); +#250450 = EDGE_CURVE('',#250451,#250443,#250453,.T.); +#250451 = VERTEX_POINT('',#250452); +#250452 = CARTESIAN_POINT('',(123.911358,-104.041421,1.51)); +#250453 = LINE('',#250454,#250455); +#250454 = CARTESIAN_POINT('',(123.911358,-104.041421,1.51)); +#250455 = VECTOR('',#250456,1.); +#250456 = DIRECTION('',(0.,0.,1.)); +#250457 = ORIENTED_EDGE('',*,*,#250458,.F.); +#250458 = EDGE_CURVE('',#250420,#250451,#250459,.T.); +#250459 = LINE('',#250460,#250461); +#250460 = CARTESIAN_POINT('',(127.933147,-100.016916,1.51)); +#250461 = VECTOR('',#250462,1.); +#250462 = DIRECTION('',(-0.706868059355,-0.707345422452,0.)); +#250463 = PLANE('',#250464); +#250464 = AXIS2_PLACEMENT_3D('',#250465,#250466,#250467); +#250465 = CARTESIAN_POINT('',(127.933147,-100.016916,1.51)); +#250466 = DIRECTION('',(0.707345422452,-0.706868059355,0.)); +#250467 = DIRECTION('',(-0.706868059355,-0.707345422452,0.)); +#250468 = ADVANCED_FACE('',(#250469),#250494,.T.); +#250469 = FACE_BOUND('',#250470,.T.); +#250470 = EDGE_LOOP('',(#250471,#250472,#250480,#250488)); +#250471 = ORIENTED_EDGE('',*,*,#250450,.T.); +#250472 = ORIENTED_EDGE('',*,*,#250473,.T.); +#250473 = EDGE_CURVE('',#250443,#250474,#250476,.T.); +#250474 = VERTEX_POINT('',#250475); +#250475 = CARTESIAN_POINT('',(123.909437,-110.55668,1.545)); +#250476 = LINE('',#250477,#250478); +#250477 = CARTESIAN_POINT('',(123.911358,-104.041421,1.545)); +#250478 = VECTOR('',#250479,1.); +#250479 = DIRECTION('',(-2.948462856979E-04,-0.999999956533,0.)); +#250480 = ORIENTED_EDGE('',*,*,#250481,.F.); +#250481 = EDGE_CURVE('',#250482,#250474,#250484,.T.); +#250482 = VERTEX_POINT('',#250483); +#250483 = CARTESIAN_POINT('',(123.909437,-110.55668,1.51)); +#250484 = LINE('',#250485,#250486); +#250485 = CARTESIAN_POINT('',(123.909437,-110.55668,1.51)); +#250486 = VECTOR('',#250487,1.); +#250487 = DIRECTION('',(0.,0.,1.)); +#250488 = ORIENTED_EDGE('',*,*,#250489,.F.); +#250489 = EDGE_CURVE('',#250451,#250482,#250490,.T.); +#250490 = LINE('',#250491,#250492); +#250491 = CARTESIAN_POINT('',(123.911358,-104.041421,1.51)); +#250492 = VECTOR('',#250493,1.); +#250493 = DIRECTION('',(-2.948462856979E-04,-0.999999956533,0.)); +#250494 = PLANE('',#250495); +#250495 = AXIS2_PLACEMENT_3D('',#250496,#250497,#250498); +#250496 = CARTESIAN_POINT('',(123.911358,-104.041421,1.51)); +#250497 = DIRECTION('',(0.999999956533,-2.948462856979E-04,0.)); +#250498 = DIRECTION('',(-2.948462856979E-04,-0.999999956533,0.)); +#250499 = ADVANCED_FACE('',(#250500),#250525,.T.); +#250500 = FACE_BOUND('',#250501,.T.); +#250501 = EDGE_LOOP('',(#250502,#250503,#250511,#250519)); +#250502 = ORIENTED_EDGE('',*,*,#250481,.T.); +#250503 = ORIENTED_EDGE('',*,*,#250504,.T.); +#250504 = EDGE_CURVE('',#250474,#250505,#250507,.T.); +#250505 = VERTEX_POINT('',#250506); +#250506 = CARTESIAN_POINT('',(123.894505,-110.592729,1.545)); +#250507 = LINE('',#250508,#250509); +#250508 = CARTESIAN_POINT('',(123.909437,-110.55668,1.545)); +#250509 = VECTOR('',#250510,1.); +#250510 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250511 = ORIENTED_EDGE('',*,*,#250512,.F.); +#250512 = EDGE_CURVE('',#250513,#250505,#250515,.T.); +#250513 = VERTEX_POINT('',#250514); +#250514 = CARTESIAN_POINT('',(123.894505,-110.592729,1.51)); +#250515 = LINE('',#250516,#250517); +#250516 = CARTESIAN_POINT('',(123.894505,-110.592729,1.51)); +#250517 = VECTOR('',#250518,1.); +#250518 = DIRECTION('',(0.,0.,1.)); +#250519 = ORIENTED_EDGE('',*,*,#250520,.F.); +#250520 = EDGE_CURVE('',#250482,#250513,#250521,.T.); +#250521 = LINE('',#250522,#250523); +#250522 = CARTESIAN_POINT('',(123.909437,-110.55668,1.51)); +#250523 = VECTOR('',#250524,1.); +#250524 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250525 = PLANE('',#250526); +#250526 = AXIS2_PLACEMENT_3D('',#250527,#250528,#250529); +#250527 = CARTESIAN_POINT('',(123.909437,-110.55668,1.51)); +#250528 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#250529 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#250530 = ADVANCED_FACE('',(#250531),#250556,.T.); +#250531 = FACE_BOUND('',#250532,.T.); +#250532 = EDGE_LOOP('',(#250533,#250534,#250542,#250550)); +#250533 = ORIENTED_EDGE('',*,*,#250512,.T.); +#250534 = ORIENTED_EDGE('',*,*,#250535,.T.); +#250535 = EDGE_CURVE('',#250505,#250536,#250538,.T.); +#250536 = VERTEX_POINT('',#250537); +#250537 = CARTESIAN_POINT('',(121.751471,-112.738479,1.545)); +#250538 = LINE('',#250539,#250540); +#250539 = CARTESIAN_POINT('',(123.894505,-110.592729,1.545)); +#250540 = VECTOR('',#250541,1.); +#250541 = DIRECTION('',(-0.70665884309,-0.707554435702,0.)); +#250542 = ORIENTED_EDGE('',*,*,#250543,.F.); +#250543 = EDGE_CURVE('',#250544,#250536,#250546,.T.); +#250544 = VERTEX_POINT('',#250545); +#250545 = CARTESIAN_POINT('',(121.751471,-112.738479,1.51)); +#250546 = LINE('',#250547,#250548); +#250547 = CARTESIAN_POINT('',(121.751471,-112.738479,1.51)); +#250548 = VECTOR('',#250549,1.); +#250549 = DIRECTION('',(0.,0.,1.)); +#250550 = ORIENTED_EDGE('',*,*,#250551,.F.); +#250551 = EDGE_CURVE('',#250513,#250544,#250552,.T.); +#250552 = LINE('',#250553,#250554); +#250553 = CARTESIAN_POINT('',(123.894505,-110.592729,1.51)); +#250554 = VECTOR('',#250555,1.); +#250555 = DIRECTION('',(-0.70665884309,-0.707554435702,0.)); +#250556 = PLANE('',#250557); +#250557 = AXIS2_PLACEMENT_3D('',#250558,#250559,#250560); +#250558 = CARTESIAN_POINT('',(123.894505,-110.592729,1.51)); +#250559 = DIRECTION('',(0.707554435702,-0.70665884309,0.)); +#250560 = DIRECTION('',(-0.70665884309,-0.707554435702,0.)); +#250561 = ADVANCED_FACE('',(#250562),#250587,.T.); +#250562 = FACE_BOUND('',#250563,.T.); +#250563 = EDGE_LOOP('',(#250564,#250565,#250573,#250581)); +#250564 = ORIENTED_EDGE('',*,*,#250543,.T.); +#250565 = ORIENTED_EDGE('',*,*,#250566,.T.); +#250566 = EDGE_CURVE('',#250536,#250567,#250569,.T.); +#250567 = VERTEX_POINT('',#250568); +#250568 = CARTESIAN_POINT('',(121.74955,-112.785195,1.545)); +#250569 = LINE('',#250570,#250571); +#250570 = CARTESIAN_POINT('',(121.751471,-112.738479,1.545)); +#250571 = VECTOR('',#250572,1.); +#250572 = DIRECTION('',(-4.10860931322E-02,-0.999155609978,0.)); +#250573 = ORIENTED_EDGE('',*,*,#250574,.F.); +#250574 = EDGE_CURVE('',#250575,#250567,#250577,.T.); +#250575 = VERTEX_POINT('',#250576); +#250576 = CARTESIAN_POINT('',(121.74955,-112.785195,1.51)); +#250577 = LINE('',#250578,#250579); +#250578 = CARTESIAN_POINT('',(121.74955,-112.785195,1.51)); +#250579 = VECTOR('',#250580,1.); +#250580 = DIRECTION('',(0.,0.,1.)); +#250581 = ORIENTED_EDGE('',*,*,#250582,.F.); +#250582 = EDGE_CURVE('',#250544,#250575,#250583,.T.); +#250583 = LINE('',#250584,#250585); +#250584 = CARTESIAN_POINT('',(121.751471,-112.738479,1.51)); +#250585 = VECTOR('',#250586,1.); +#250586 = DIRECTION('',(-4.10860931322E-02,-0.999155609978,0.)); +#250587 = PLANE('',#250588); +#250588 = AXIS2_PLACEMENT_3D('',#250589,#250590,#250591); +#250589 = CARTESIAN_POINT('',(121.751471,-112.738479,1.51)); +#250590 = DIRECTION('',(0.999155609978,-4.10860931322E-02,0.)); +#250591 = DIRECTION('',(-4.10860931322E-02,-0.999155609978,0.)); +#250592 = ADVANCED_FACE('',(#250593),#250618,.T.); +#250593 = FACE_BOUND('',#250594,.T.); +#250594 = EDGE_LOOP('',(#250595,#250596,#250604,#250612)); +#250595 = ORIENTED_EDGE('',*,*,#250574,.T.); +#250596 = ORIENTED_EDGE('',*,*,#250597,.T.); +#250597 = EDGE_CURVE('',#250567,#250598,#250600,.T.); +#250598 = VERTEX_POINT('',#250599); +#250599 = CARTESIAN_POINT('',(121.734618,-112.821243,1.545)); +#250600 = LINE('',#250601,#250602); +#250601 = CARTESIAN_POINT('',(121.74955,-112.785195,1.545)); +#250602 = VECTOR('',#250603,1.); +#250603 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#250604 = ORIENTED_EDGE('',*,*,#250605,.F.); +#250605 = EDGE_CURVE('',#250606,#250598,#250608,.T.); +#250606 = VERTEX_POINT('',#250607); +#250607 = CARTESIAN_POINT('',(121.734618,-112.821243,1.51)); +#250608 = LINE('',#250609,#250610); +#250609 = CARTESIAN_POINT('',(121.734618,-112.821243,1.51)); +#250610 = VECTOR('',#250611,1.); +#250611 = DIRECTION('',(0.,0.,1.)); +#250612 = ORIENTED_EDGE('',*,*,#250613,.F.); +#250613 = EDGE_CURVE('',#250575,#250606,#250614,.T.); +#250614 = LINE('',#250615,#250616); +#250615 = CARTESIAN_POINT('',(121.74955,-112.785195,1.51)); +#250616 = VECTOR('',#250617,1.); +#250617 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#250618 = PLANE('',#250619); +#250619 = AXIS2_PLACEMENT_3D('',#250620,#250621,#250622); +#250620 = CARTESIAN_POINT('',(121.74955,-112.785195,1.51)); +#250621 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#250622 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#250623 = ADVANCED_FACE('',(#250624),#250649,.T.); +#250624 = FACE_BOUND('',#250625,.T.); +#250625 = EDGE_LOOP('',(#250626,#250627,#250635,#250643)); +#250626 = ORIENTED_EDGE('',*,*,#250605,.T.); +#250627 = ORIENTED_EDGE('',*,*,#250628,.T.); +#250628 = EDGE_CURVE('',#250598,#250629,#250631,.T.); +#250629 = VERTEX_POINT('',#250630); +#250630 = CARTESIAN_POINT('',(121.472713,-113.083147,1.545)); +#250631 = LINE('',#250632,#250633); +#250632 = CARTESIAN_POINT('',(121.734618,-112.821243,1.545)); +#250633 = VECTOR('',#250634,1.); +#250634 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#250635 = ORIENTED_EDGE('',*,*,#250636,.F.); +#250636 = EDGE_CURVE('',#250637,#250629,#250639,.T.); +#250637 = VERTEX_POINT('',#250638); +#250638 = CARTESIAN_POINT('',(121.472713,-113.083147,1.51)); +#250639 = LINE('',#250640,#250641); +#250640 = CARTESIAN_POINT('',(121.472713,-113.083147,1.51)); +#250641 = VECTOR('',#250642,1.); +#250642 = DIRECTION('',(0.,0.,1.)); +#250643 = ORIENTED_EDGE('',*,*,#250644,.F.); +#250644 = EDGE_CURVE('',#250606,#250637,#250645,.T.); +#250645 = LINE('',#250646,#250647); +#250646 = CARTESIAN_POINT('',(121.734618,-112.821243,1.51)); +#250647 = VECTOR('',#250648,1.); +#250648 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#250649 = PLANE('',#250650); +#250650 = AXIS2_PLACEMENT_3D('',#250651,#250652,#250653); +#250651 = CARTESIAN_POINT('',(121.734618,-112.821243,1.51)); +#250652 = DIRECTION('',(0.707105431253,-0.707108131118,0.)); +#250653 = DIRECTION('',(-0.707108131118,-0.707105431253,0.)); +#250654 = ADVANCED_FACE('',(#250655),#250680,.T.); +#250655 = FACE_BOUND('',#250656,.T.); +#250656 = EDGE_LOOP('',(#250657,#250658,#250666,#250674)); +#250657 = ORIENTED_EDGE('',*,*,#250636,.T.); +#250658 = ORIENTED_EDGE('',*,*,#250659,.T.); +#250659 = EDGE_CURVE('',#250629,#250660,#250662,.T.); +#250660 = VERTEX_POINT('',#250661); +#250661 = CARTESIAN_POINT('',(121.436665,-113.098079,1.545)); +#250662 = LINE('',#250663,#250664); +#250663 = CARTESIAN_POINT('',(121.472713,-113.083147,1.545)); +#250664 = VECTOR('',#250665,1.); +#250665 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#250666 = ORIENTED_EDGE('',*,*,#250667,.F.); +#250667 = EDGE_CURVE('',#250668,#250660,#250670,.T.); +#250668 = VERTEX_POINT('',#250669); +#250669 = CARTESIAN_POINT('',(121.436665,-113.098079,1.51)); +#250670 = LINE('',#250671,#250672); +#250671 = CARTESIAN_POINT('',(121.436665,-113.098079,1.51)); +#250672 = VECTOR('',#250673,1.); +#250673 = DIRECTION('',(0.,0.,1.)); +#250674 = ORIENTED_EDGE('',*,*,#250675,.F.); +#250675 = EDGE_CURVE('',#250637,#250668,#250676,.T.); +#250676 = LINE('',#250677,#250678); +#250677 = CARTESIAN_POINT('',(121.472713,-113.083147,1.51)); +#250678 = VECTOR('',#250679,1.); +#250679 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#250680 = PLANE('',#250681); +#250681 = AXIS2_PLACEMENT_3D('',#250682,#250683,#250684); +#250682 = CARTESIAN_POINT('',(121.472713,-113.083147,1.51)); +#250683 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#250684 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#250685 = ADVANCED_FACE('',(#250686),#250711,.T.); +#250686 = FACE_BOUND('',#250687,.T.); +#250687 = EDGE_LOOP('',(#250688,#250689,#250697,#250705)); +#250688 = ORIENTED_EDGE('',*,*,#250667,.T.); +#250689 = ORIENTED_EDGE('',*,*,#250690,.T.); +#250690 = EDGE_CURVE('',#250660,#250691,#250693,.T.); +#250691 = VERTEX_POINT('',#250692); +#250692 = CARTESIAN_POINT('',(121.38995,-113.1,1.545)); +#250693 = LINE('',#250694,#250695); +#250694 = CARTESIAN_POINT('',(121.436665,-113.098079,1.545)); +#250695 = VECTOR('',#250696,1.); +#250696 = DIRECTION('',(-0.999155573873,-4.108697115286E-02,0.)); +#250697 = ORIENTED_EDGE('',*,*,#250698,.F.); +#250698 = EDGE_CURVE('',#250699,#250691,#250701,.T.); +#250699 = VERTEX_POINT('',#250700); +#250700 = CARTESIAN_POINT('',(121.38995,-113.1,1.51)); +#250701 = LINE('',#250702,#250703); +#250702 = CARTESIAN_POINT('',(121.38995,-113.1,1.51)); +#250703 = VECTOR('',#250704,1.); +#250704 = DIRECTION('',(0.,0.,1.)); +#250705 = ORIENTED_EDGE('',*,*,#250706,.F.); +#250706 = EDGE_CURVE('',#250668,#250699,#250707,.T.); +#250707 = LINE('',#250708,#250709); +#250708 = CARTESIAN_POINT('',(121.436665,-113.098079,1.51)); +#250709 = VECTOR('',#250710,1.); +#250710 = DIRECTION('',(-0.999155573873,-4.108697115286E-02,0.)); +#250711 = PLANE('',#250712); +#250712 = AXIS2_PLACEMENT_3D('',#250713,#250714,#250715); +#250713 = CARTESIAN_POINT('',(121.436665,-113.098079,1.51)); +#250714 = DIRECTION('',(4.108697115286E-02,-0.999155573873,0.)); +#250715 = DIRECTION('',(-0.999155573873,-4.108697115286E-02,0.)); +#250716 = ADVANCED_FACE('',(#250717),#250742,.T.); +#250717 = FACE_BOUND('',#250718,.T.); +#250718 = EDGE_LOOP('',(#250719,#250720,#250728,#250736)); +#250719 = ORIENTED_EDGE('',*,*,#250698,.T.); +#250720 = ORIENTED_EDGE('',*,*,#250721,.T.); +#250721 = EDGE_CURVE('',#250691,#250722,#250724,.T.); +#250722 = VERTEX_POINT('',#250723); +#250723 = CARTESIAN_POINT('',(121.3,-113.18995,1.545)); +#250724 = LINE('',#250725,#250726); +#250725 = CARTESIAN_POINT('',(121.38995,-113.1,1.545)); +#250726 = VECTOR('',#250727,1.); +#250727 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#250728 = ORIENTED_EDGE('',*,*,#250729,.F.); +#250729 = EDGE_CURVE('',#250730,#250722,#250732,.T.); +#250730 = VERTEX_POINT('',#250731); +#250731 = CARTESIAN_POINT('',(121.3,-113.18995,1.51)); +#250732 = LINE('',#250733,#250734); +#250733 = CARTESIAN_POINT('',(121.3,-113.18995,1.51)); +#250734 = VECTOR('',#250735,1.); +#250735 = DIRECTION('',(0.,0.,1.)); +#250736 = ORIENTED_EDGE('',*,*,#250737,.F.); +#250737 = EDGE_CURVE('',#250699,#250730,#250738,.T.); +#250738 = LINE('',#250739,#250740); +#250739 = CARTESIAN_POINT('',(121.38995,-113.1,1.51)); +#250740 = VECTOR('',#250741,1.); +#250741 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#250742 = PLANE('',#250743); +#250743 = AXIS2_PLACEMENT_3D('',#250744,#250745,#250746); +#250744 = CARTESIAN_POINT('',(121.38995,-113.1,1.51)); +#250745 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250746 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#250747 = ADVANCED_FACE('',(#250748),#250773,.T.); +#250748 = FACE_BOUND('',#250749,.T.); +#250749 = EDGE_LOOP('',(#250750,#250751,#250759,#250767)); +#250750 = ORIENTED_EDGE('',*,*,#250729,.T.); +#250751 = ORIENTED_EDGE('',*,*,#250752,.T.); +#250752 = EDGE_CURVE('',#250722,#250753,#250755,.T.); +#250753 = VERTEX_POINT('',#250754); +#250754 = CARTESIAN_POINT('',(121.3,-149.592892,1.545)); +#250755 = LINE('',#250756,#250757); +#250756 = CARTESIAN_POINT('',(121.3,-113.18995,1.545)); +#250757 = VECTOR('',#250758,1.); +#250758 = DIRECTION('',(0.,-1.,0.)); +#250759 = ORIENTED_EDGE('',*,*,#250760,.F.); +#250760 = EDGE_CURVE('',#250761,#250753,#250763,.T.); +#250761 = VERTEX_POINT('',#250762); +#250762 = CARTESIAN_POINT('',(121.3,-149.592892,1.51)); +#250763 = LINE('',#250764,#250765); +#250764 = CARTESIAN_POINT('',(121.3,-149.592892,1.51)); +#250765 = VECTOR('',#250766,1.); +#250766 = DIRECTION('',(0.,0.,1.)); +#250767 = ORIENTED_EDGE('',*,*,#250768,.F.); +#250768 = EDGE_CURVE('',#250730,#250761,#250769,.T.); +#250769 = LINE('',#250770,#250771); +#250770 = CARTESIAN_POINT('',(121.3,-113.18995,1.51)); +#250771 = VECTOR('',#250772,1.); +#250772 = DIRECTION('',(0.,-1.,0.)); +#250773 = PLANE('',#250774); +#250774 = AXIS2_PLACEMENT_3D('',#250775,#250776,#250777); +#250775 = CARTESIAN_POINT('',(121.3,-113.18995,1.51)); +#250776 = DIRECTION('',(1.,0.,-0.)); +#250777 = DIRECTION('',(0.,-1.,0.)); +#250778 = ADVANCED_FACE('',(#250779),#250804,.T.); +#250779 = FACE_BOUND('',#250780,.T.); +#250780 = EDGE_LOOP('',(#250781,#250782,#250790,#250798)); +#250781 = ORIENTED_EDGE('',*,*,#250760,.T.); +#250782 = ORIENTED_EDGE('',*,*,#250783,.T.); +#250783 = EDGE_CURVE('',#250753,#250784,#250786,.T.); +#250784 = VERTEX_POINT('',#250785); +#250785 = CARTESIAN_POINT('',(123.007108,-151.3,1.545)); +#250786 = LINE('',#250787,#250788); +#250787 = CARTESIAN_POINT('',(121.3,-149.592892,1.545)); +#250788 = VECTOR('',#250789,1.); +#250789 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250790 = ORIENTED_EDGE('',*,*,#250791,.F.); +#250791 = EDGE_CURVE('',#250792,#250784,#250794,.T.); +#250792 = VERTEX_POINT('',#250793); +#250793 = CARTESIAN_POINT('',(123.007108,-151.3,1.51)); +#250794 = LINE('',#250795,#250796); +#250795 = CARTESIAN_POINT('',(123.007108,-151.3,1.51)); +#250796 = VECTOR('',#250797,1.); +#250797 = DIRECTION('',(0.,0.,1.)); +#250798 = ORIENTED_EDGE('',*,*,#250799,.F.); +#250799 = EDGE_CURVE('',#250761,#250792,#250800,.T.); +#250800 = LINE('',#250801,#250802); +#250801 = CARTESIAN_POINT('',(121.3,-149.592892,1.51)); +#250802 = VECTOR('',#250803,1.); +#250803 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250804 = PLANE('',#250805); +#250805 = AXIS2_PLACEMENT_3D('',#250806,#250807,#250808); +#250806 = CARTESIAN_POINT('',(121.3,-149.592892,1.51)); +#250807 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#250808 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250809 = ADVANCED_FACE('',(#250810),#250835,.T.); +#250810 = FACE_BOUND('',#250811,.T.); +#250811 = EDGE_LOOP('',(#250812,#250813,#250821,#250829)); +#250812 = ORIENTED_EDGE('',*,*,#250791,.T.); +#250813 = ORIENTED_EDGE('',*,*,#250814,.T.); +#250814 = EDGE_CURVE('',#250784,#250815,#250817,.T.); +#250815 = VERTEX_POINT('',#250816); +#250816 = CARTESIAN_POINT('',(127.169509,-151.301921,1.545)); +#250817 = LINE('',#250818,#250819); +#250818 = CARTESIAN_POINT('',(123.007108,-151.3,1.545)); +#250819 = VECTOR('',#250820,1.); +#250820 = DIRECTION('',(0.999999893503,-4.615124288604E-04,0.)); +#250821 = ORIENTED_EDGE('',*,*,#250822,.F.); +#250822 = EDGE_CURVE('',#250823,#250815,#250825,.T.); +#250823 = VERTEX_POINT('',#250824); +#250824 = CARTESIAN_POINT('',(127.169509,-151.301921,1.51)); +#250825 = LINE('',#250826,#250827); +#250826 = CARTESIAN_POINT('',(127.169509,-151.301921,1.51)); +#250827 = VECTOR('',#250828,1.); +#250828 = DIRECTION('',(0.,0.,1.)); +#250829 = ORIENTED_EDGE('',*,*,#250830,.F.); +#250830 = EDGE_CURVE('',#250792,#250823,#250831,.T.); +#250831 = LINE('',#250832,#250833); +#250832 = CARTESIAN_POINT('',(123.007108,-151.3,1.51)); +#250833 = VECTOR('',#250834,1.); +#250834 = DIRECTION('',(0.999999893503,-4.615124288604E-04,0.)); +#250835 = PLANE('',#250836); +#250836 = AXIS2_PLACEMENT_3D('',#250837,#250838,#250839); +#250837 = CARTESIAN_POINT('',(123.007108,-151.3,1.51)); +#250838 = DIRECTION('',(4.615124288604E-04,0.999999893503,-0.)); +#250839 = DIRECTION('',(0.999999893503,-4.615124288604E-04,0.)); +#250840 = ADVANCED_FACE('',(#250841),#250866,.T.); +#250841 = FACE_BOUND('',#250842,.T.); +#250842 = EDGE_LOOP('',(#250843,#250844,#250852,#250860)); +#250843 = ORIENTED_EDGE('',*,*,#250822,.T.); +#250844 = ORIENTED_EDGE('',*,*,#250845,.T.); +#250845 = EDGE_CURVE('',#250815,#250846,#250848,.T.); +#250846 = VERTEX_POINT('',#250847); +#250847 = CARTESIAN_POINT('',(127.205557,-151.316853,1.545)); +#250848 = LINE('',#250849,#250850); +#250849 = CARTESIAN_POINT('',(127.169509,-151.301921,1.545)); +#250850 = VECTOR('',#250851,1.); +#250851 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#250852 = ORIENTED_EDGE('',*,*,#250853,.F.); +#250853 = EDGE_CURVE('',#250854,#250846,#250856,.T.); +#250854 = VERTEX_POINT('',#250855); +#250855 = CARTESIAN_POINT('',(127.205557,-151.316853,1.51)); +#250856 = LINE('',#250857,#250858); +#250857 = CARTESIAN_POINT('',(127.205557,-151.316853,1.51)); +#250858 = VECTOR('',#250859,1.); +#250859 = DIRECTION('',(0.,0.,1.)); +#250860 = ORIENTED_EDGE('',*,*,#250861,.F.); +#250861 = EDGE_CURVE('',#250823,#250854,#250862,.T.); +#250862 = LINE('',#250863,#250864); +#250863 = CARTESIAN_POINT('',(127.169509,-151.301921,1.51)); +#250864 = VECTOR('',#250865,1.); +#250865 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#250866 = PLANE('',#250867); +#250867 = AXIS2_PLACEMENT_3D('',#250868,#250869,#250870); +#250868 = CARTESIAN_POINT('',(127.169509,-151.301921,1.51)); +#250869 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#250870 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#250871 = ADVANCED_FACE('',(#250872),#250897,.T.); +#250872 = FACE_BOUND('',#250873,.T.); +#250873 = EDGE_LOOP('',(#250874,#250875,#250883,#250891)); +#250874 = ORIENTED_EDGE('',*,*,#250853,.T.); +#250875 = ORIENTED_EDGE('',*,*,#250876,.T.); +#250876 = EDGE_CURVE('',#250846,#250877,#250879,.T.); +#250877 = VERTEX_POINT('',#250878); +#250878 = CARTESIAN_POINT('',(129.083147,-153.194443,1.545)); +#250879 = LINE('',#250880,#250881); +#250880 = CARTESIAN_POINT('',(127.205557,-151.316853,1.545)); +#250881 = VECTOR('',#250882,1.); +#250882 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250883 = ORIENTED_EDGE('',*,*,#250884,.F.); +#250884 = EDGE_CURVE('',#250885,#250877,#250887,.T.); +#250885 = VERTEX_POINT('',#250886); +#250886 = CARTESIAN_POINT('',(129.083147,-153.194443,1.51)); +#250887 = LINE('',#250888,#250889); +#250888 = CARTESIAN_POINT('',(129.083147,-153.194443,1.51)); +#250889 = VECTOR('',#250890,1.); +#250890 = DIRECTION('',(0.,0.,1.)); +#250891 = ORIENTED_EDGE('',*,*,#250892,.F.); +#250892 = EDGE_CURVE('',#250854,#250885,#250893,.T.); +#250893 = LINE('',#250894,#250895); +#250894 = CARTESIAN_POINT('',(127.205557,-151.316853,1.51)); +#250895 = VECTOR('',#250896,1.); +#250896 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250897 = PLANE('',#250898); +#250898 = AXIS2_PLACEMENT_3D('',#250899,#250900,#250901); +#250899 = CARTESIAN_POINT('',(127.205557,-151.316853,1.51)); +#250900 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#250901 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#250902 = ADVANCED_FACE('',(#250903),#250930,.T.); +#250903 = FACE_BOUND('',#250904,.T.); +#250904 = EDGE_LOOP('',(#250905,#250906,#250915,#250923)); +#250905 = ORIENTED_EDGE('',*,*,#250884,.T.); +#250906 = ORIENTED_EDGE('',*,*,#250907,.T.); +#250907 = EDGE_CURVE('',#250877,#250908,#250910,.T.); +#250908 = VERTEX_POINT('',#250909); +#250909 = CARTESIAN_POINT('',(128.944443,-153.333147,1.545)); +#250910 = CIRCLE('',#250911,0.10000001929); +#250911 = AXIS2_PLACEMENT_3D('',#250912,#250913,#250914); +#250912 = CARTESIAN_POINT('',(129.,-153.25,1.545)); +#250913 = DIRECTION('',(0.,0.,-1.)); +#250914 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#250915 = ORIENTED_EDGE('',*,*,#250916,.F.); +#250916 = EDGE_CURVE('',#250917,#250908,#250919,.T.); +#250917 = VERTEX_POINT('',#250918); +#250918 = CARTESIAN_POINT('',(128.944443,-153.333147,1.51)); +#250919 = LINE('',#250920,#250921); +#250920 = CARTESIAN_POINT('',(128.944443,-153.333147,1.51)); +#250921 = VECTOR('',#250922,1.); +#250922 = DIRECTION('',(0.,0.,1.)); +#250923 = ORIENTED_EDGE('',*,*,#250924,.F.); +#250924 = EDGE_CURVE('',#250885,#250917,#250925,.T.); +#250925 = CIRCLE('',#250926,0.10000001929); +#250926 = AXIS2_PLACEMENT_3D('',#250927,#250928,#250929); +#250927 = CARTESIAN_POINT('',(129.,-153.25,1.51)); +#250928 = DIRECTION('',(0.,0.,-1.)); +#250929 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#250930 = CYLINDRICAL_SURFACE('',#250931,0.10000001929); +#250931 = AXIS2_PLACEMENT_3D('',#250932,#250933,#250934); +#250932 = CARTESIAN_POINT('',(129.,-153.25,1.51)); +#250933 = DIRECTION('',(0.,0.,-1.)); +#250934 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#250935 = ADVANCED_FACE('',(#250936),#250961,.T.); +#250936 = FACE_BOUND('',#250937,.T.); +#250937 = EDGE_LOOP('',(#250938,#250939,#250947,#250955)); +#250938 = ORIENTED_EDGE('',*,*,#250916,.T.); +#250939 = ORIENTED_EDGE('',*,*,#250940,.T.); +#250940 = EDGE_CURVE('',#250908,#250941,#250943,.T.); +#250941 = VERTEX_POINT('',#250942); +#250942 = CARTESIAN_POINT('',(127.108578,-151.5,1.545)); +#250943 = LINE('',#250944,#250945); +#250944 = CARTESIAN_POINT('',(128.944443,-153.333147,1.545)); +#250945 = VECTOR('',#250946,1.); +#250946 = DIRECTION('',(-0.707630410934,0.706582763391,0.)); +#250947 = ORIENTED_EDGE('',*,*,#250948,.F.); +#250948 = EDGE_CURVE('',#250949,#250941,#250951,.T.); +#250949 = VERTEX_POINT('',#250950); +#250950 = CARTESIAN_POINT('',(127.108578,-151.5,1.51)); +#250951 = LINE('',#250952,#250953); +#250952 = CARTESIAN_POINT('',(127.108578,-151.5,1.51)); +#250953 = VECTOR('',#250954,1.); +#250954 = DIRECTION('',(0.,0.,1.)); +#250955 = ORIENTED_EDGE('',*,*,#250956,.F.); +#250956 = EDGE_CURVE('',#250917,#250949,#250957,.T.); +#250957 = LINE('',#250958,#250959); +#250958 = CARTESIAN_POINT('',(128.944443,-153.333147,1.51)); +#250959 = VECTOR('',#250960,1.); +#250960 = DIRECTION('',(-0.707630410934,0.706582763391,0.)); +#250961 = PLANE('',#250962); +#250962 = AXIS2_PLACEMENT_3D('',#250963,#250964,#250965); +#250963 = CARTESIAN_POINT('',(128.944443,-153.333147,1.51)); +#250964 = DIRECTION('',(-0.706582763391,-0.707630410934,0.)); +#250965 = DIRECTION('',(-0.707630410934,0.706582763391,0.)); +#250966 = ADVANCED_FACE('',(#250967),#250992,.T.); +#250967 = FACE_BOUND('',#250968,.T.); +#250968 = EDGE_LOOP('',(#250969,#250970,#250978,#250986)); +#250969 = ORIENTED_EDGE('',*,*,#250948,.T.); +#250970 = ORIENTED_EDGE('',*,*,#250971,.T.); +#250971 = EDGE_CURVE('',#250941,#250972,#250974,.T.); +#250972 = VERTEX_POINT('',#250973); +#250973 = CARTESIAN_POINT('',(122.946177,-151.498079,1.545)); +#250974 = LINE('',#250975,#250976); +#250975 = CARTESIAN_POINT('',(127.108578,-151.5,1.545)); +#250976 = VECTOR('',#250977,1.); +#250977 = DIRECTION('',(-0.999999893503,4.615124288673E-04,0.)); +#250978 = ORIENTED_EDGE('',*,*,#250979,.F.); +#250979 = EDGE_CURVE('',#250980,#250972,#250982,.T.); +#250980 = VERTEX_POINT('',#250981); +#250981 = CARTESIAN_POINT('',(122.946177,-151.498079,1.51)); +#250982 = LINE('',#250983,#250984); +#250983 = CARTESIAN_POINT('',(122.946177,-151.498079,1.51)); +#250984 = VECTOR('',#250985,1.); +#250985 = DIRECTION('',(0.,0.,1.)); +#250986 = ORIENTED_EDGE('',*,*,#250987,.F.); +#250987 = EDGE_CURVE('',#250949,#250980,#250988,.T.); +#250988 = LINE('',#250989,#250990); +#250989 = CARTESIAN_POINT('',(127.108578,-151.5,1.51)); +#250990 = VECTOR('',#250991,1.); +#250991 = DIRECTION('',(-0.999999893503,4.615124288673E-04,0.)); +#250992 = PLANE('',#250993); +#250993 = AXIS2_PLACEMENT_3D('',#250994,#250995,#250996); +#250994 = CARTESIAN_POINT('',(127.108578,-151.5,1.51)); +#250995 = DIRECTION('',(-4.615124288673E-04,-0.999999893503,0.)); +#250996 = DIRECTION('',(-0.999999893503,4.615124288673E-04,0.)); +#250997 = ADVANCED_FACE('',(#250998),#251023,.T.); +#250998 = FACE_BOUND('',#250999,.T.); +#250999 = EDGE_LOOP('',(#251000,#251001,#251009,#251017)); +#251000 = ORIENTED_EDGE('',*,*,#250979,.T.); +#251001 = ORIENTED_EDGE('',*,*,#251002,.T.); +#251002 = EDGE_CURVE('',#250972,#251003,#251005,.T.); +#251003 = VERTEX_POINT('',#251004); +#251004 = CARTESIAN_POINT('',(122.910129,-151.483147,1.545)); +#251005 = LINE('',#251006,#251007); +#251006 = CARTESIAN_POINT('',(122.946177,-151.498079,1.545)); +#251007 = VECTOR('',#251008,1.); +#251008 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251009 = ORIENTED_EDGE('',*,*,#251010,.F.); +#251010 = EDGE_CURVE('',#251011,#251003,#251013,.T.); +#251011 = VERTEX_POINT('',#251012); +#251012 = CARTESIAN_POINT('',(122.910129,-151.483147,1.51)); +#251013 = LINE('',#251014,#251015); +#251014 = CARTESIAN_POINT('',(122.910129,-151.483147,1.51)); +#251015 = VECTOR('',#251016,1.); +#251016 = DIRECTION('',(0.,0.,1.)); +#251017 = ORIENTED_EDGE('',*,*,#251018,.F.); +#251018 = EDGE_CURVE('',#250980,#251011,#251019,.T.); +#251019 = LINE('',#251020,#251021); +#251020 = CARTESIAN_POINT('',(122.946177,-151.498079,1.51)); +#251021 = VECTOR('',#251022,1.); +#251022 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251023 = PLANE('',#251024); +#251024 = AXIS2_PLACEMENT_3D('',#251025,#251026,#251027); +#251025 = CARTESIAN_POINT('',(122.946177,-151.498079,1.51)); +#251026 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#251027 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251028 = ADVANCED_FACE('',(#251029),#251054,.T.); +#251029 = FACE_BOUND('',#251030,.T.); +#251030 = EDGE_LOOP('',(#251031,#251032,#251040,#251048)); +#251031 = ORIENTED_EDGE('',*,*,#251010,.T.); +#251032 = ORIENTED_EDGE('',*,*,#251033,.T.); +#251033 = EDGE_CURVE('',#251003,#251034,#251036,.T.); +#251034 = VERTEX_POINT('',#251035); +#251035 = CARTESIAN_POINT('',(121.116853,-149.689871,1.545)); +#251036 = LINE('',#251037,#251038); +#251037 = CARTESIAN_POINT('',(122.910129,-151.483147,1.545)); +#251038 = VECTOR('',#251039,1.); +#251039 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#251040 = ORIENTED_EDGE('',*,*,#251041,.F.); +#251041 = EDGE_CURVE('',#251042,#251034,#251044,.T.); +#251042 = VERTEX_POINT('',#251043); +#251043 = CARTESIAN_POINT('',(121.116853,-149.689871,1.51)); +#251044 = LINE('',#251045,#251046); +#251045 = CARTESIAN_POINT('',(121.116853,-149.689871,1.51)); +#251046 = VECTOR('',#251047,1.); +#251047 = DIRECTION('',(0.,0.,1.)); +#251048 = ORIENTED_EDGE('',*,*,#251049,.F.); +#251049 = EDGE_CURVE('',#251011,#251042,#251050,.T.); +#251050 = LINE('',#251051,#251052); +#251051 = CARTESIAN_POINT('',(122.910129,-151.483147,1.51)); +#251052 = VECTOR('',#251053,1.); +#251053 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#251054 = PLANE('',#251055); +#251055 = AXIS2_PLACEMENT_3D('',#251056,#251057,#251058); +#251056 = CARTESIAN_POINT('',(122.910129,-151.483147,1.51)); +#251057 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#251058 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#251059 = ADVANCED_FACE('',(#251060),#251085,.T.); +#251060 = FACE_BOUND('',#251061,.T.); +#251061 = EDGE_LOOP('',(#251062,#251063,#251071,#251079)); +#251062 = ORIENTED_EDGE('',*,*,#251041,.T.); +#251063 = ORIENTED_EDGE('',*,*,#251064,.T.); +#251064 = EDGE_CURVE('',#251034,#251065,#251067,.T.); +#251065 = VERTEX_POINT('',#251066); +#251066 = CARTESIAN_POINT('',(121.101921,-149.653823,1.545)); +#251067 = LINE('',#251068,#251069); +#251068 = CARTESIAN_POINT('',(121.116853,-149.689871,1.545)); +#251069 = VECTOR('',#251070,1.); +#251070 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#251071 = ORIENTED_EDGE('',*,*,#251072,.F.); +#251072 = EDGE_CURVE('',#251073,#251065,#251075,.T.); +#251073 = VERTEX_POINT('',#251074); +#251074 = CARTESIAN_POINT('',(121.101921,-149.653823,1.51)); +#251075 = LINE('',#251076,#251077); +#251076 = CARTESIAN_POINT('',(121.101921,-149.653823,1.51)); +#251077 = VECTOR('',#251078,1.); +#251078 = DIRECTION('',(0.,0.,1.)); +#251079 = ORIENTED_EDGE('',*,*,#251080,.F.); +#251080 = EDGE_CURVE('',#251042,#251073,#251081,.T.); +#251081 = LINE('',#251082,#251083); +#251082 = CARTESIAN_POINT('',(121.116853,-149.689871,1.51)); +#251083 = VECTOR('',#251084,1.); +#251084 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#251085 = PLANE('',#251086); +#251086 = AXIS2_PLACEMENT_3D('',#251087,#251088,#251089); +#251087 = CARTESIAN_POINT('',(121.116853,-149.689871,1.51)); +#251088 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#251089 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#251090 = ADVANCED_FACE('',(#251091),#251116,.T.); +#251091 = FACE_BOUND('',#251092,.T.); +#251092 = EDGE_LOOP('',(#251093,#251094,#251102,#251110)); +#251093 = ORIENTED_EDGE('',*,*,#251072,.T.); +#251094 = ORIENTED_EDGE('',*,*,#251095,.T.); +#251095 = EDGE_CURVE('',#251065,#251096,#251098,.T.); +#251096 = VERTEX_POINT('',#251097); +#251097 = CARTESIAN_POINT('',(121.101921,-113.12902,1.545)); +#251098 = LINE('',#251099,#251100); +#251099 = CARTESIAN_POINT('',(121.101921,-149.653823,1.545)); +#251100 = VECTOR('',#251101,1.); +#251101 = DIRECTION('',(0.,1.,0.)); +#251102 = ORIENTED_EDGE('',*,*,#251103,.F.); +#251103 = EDGE_CURVE('',#251104,#251096,#251106,.T.); +#251104 = VERTEX_POINT('',#251105); +#251105 = CARTESIAN_POINT('',(121.101921,-113.12902,1.51)); +#251106 = LINE('',#251107,#251108); +#251107 = CARTESIAN_POINT('',(121.101921,-113.12902,1.51)); +#251108 = VECTOR('',#251109,1.); +#251109 = DIRECTION('',(0.,0.,1.)); +#251110 = ORIENTED_EDGE('',*,*,#251111,.F.); +#251111 = EDGE_CURVE('',#251073,#251104,#251112,.T.); +#251112 = LINE('',#251113,#251114); +#251113 = CARTESIAN_POINT('',(121.101921,-149.653823,1.51)); +#251114 = VECTOR('',#251115,1.); +#251115 = DIRECTION('',(0.,1.,0.)); +#251116 = PLANE('',#251117); +#251117 = AXIS2_PLACEMENT_3D('',#251118,#251119,#251120); +#251118 = CARTESIAN_POINT('',(121.101921,-149.653823,1.51)); +#251119 = DIRECTION('',(-1.,0.,0.)); +#251120 = DIRECTION('',(0.,1.,0.)); +#251121 = ADVANCED_FACE('',(#251122),#251147,.T.); +#251122 = FACE_BOUND('',#251123,.T.); +#251123 = EDGE_LOOP('',(#251124,#251125,#251133,#251141)); +#251124 = ORIENTED_EDGE('',*,*,#251103,.T.); +#251125 = ORIENTED_EDGE('',*,*,#251126,.T.); +#251126 = EDGE_CURVE('',#251096,#251127,#251129,.T.); +#251127 = VERTEX_POINT('',#251128); +#251128 = CARTESIAN_POINT('',(121.116853,-113.092972,1.545)); +#251129 = LINE('',#251130,#251131); +#251130 = CARTESIAN_POINT('',(121.101921,-113.12902,1.545)); +#251131 = VECTOR('',#251132,1.); +#251132 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251133 = ORIENTED_EDGE('',*,*,#251134,.F.); +#251134 = EDGE_CURVE('',#251135,#251127,#251137,.T.); +#251135 = VERTEX_POINT('',#251136); +#251136 = CARTESIAN_POINT('',(121.116853,-113.092972,1.51)); +#251137 = LINE('',#251138,#251139); +#251138 = CARTESIAN_POINT('',(121.116853,-113.092972,1.51)); +#251139 = VECTOR('',#251140,1.); +#251140 = DIRECTION('',(0.,0.,1.)); +#251141 = ORIENTED_EDGE('',*,*,#251142,.F.); +#251142 = EDGE_CURVE('',#251104,#251135,#251143,.T.); +#251143 = LINE('',#251144,#251145); +#251144 = CARTESIAN_POINT('',(121.101921,-113.12902,1.51)); +#251145 = VECTOR('',#251146,1.); +#251146 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251147 = PLANE('',#251148); +#251148 = AXIS2_PLACEMENT_3D('',#251149,#251150,#251151); +#251149 = CARTESIAN_POINT('',(121.101921,-113.12902,1.51)); +#251150 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251151 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251152 = ADVANCED_FACE('',(#251153),#251178,.T.); +#251153 = FACE_BOUND('',#251154,.T.); +#251154 = EDGE_LOOP('',(#251155,#251156,#251164,#251172)); +#251155 = ORIENTED_EDGE('',*,*,#251134,.T.); +#251156 = ORIENTED_EDGE('',*,*,#251157,.T.); +#251157 = EDGE_CURVE('',#251127,#251158,#251160,.T.); +#251158 = VERTEX_POINT('',#251159); +#251159 = CARTESIAN_POINT('',(121.292972,-112.916853,1.545)); +#251160 = LINE('',#251161,#251162); +#251161 = CARTESIAN_POINT('',(121.116853,-113.092972,1.545)); +#251162 = VECTOR('',#251163,1.); +#251163 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251164 = ORIENTED_EDGE('',*,*,#251165,.F.); +#251165 = EDGE_CURVE('',#251166,#251158,#251168,.T.); +#251166 = VERTEX_POINT('',#251167); +#251167 = CARTESIAN_POINT('',(121.292972,-112.916853,1.51)); +#251168 = LINE('',#251169,#251170); +#251169 = CARTESIAN_POINT('',(121.292972,-112.916853,1.51)); +#251170 = VECTOR('',#251171,1.); +#251171 = DIRECTION('',(0.,0.,1.)); +#251172 = ORIENTED_EDGE('',*,*,#251173,.F.); +#251173 = EDGE_CURVE('',#251135,#251166,#251174,.T.); +#251174 = LINE('',#251175,#251176); +#251175 = CARTESIAN_POINT('',(121.116853,-113.092972,1.51)); +#251176 = VECTOR('',#251177,1.); +#251177 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251178 = PLANE('',#251179); +#251179 = AXIS2_PLACEMENT_3D('',#251180,#251181,#251182); +#251180 = CARTESIAN_POINT('',(121.116853,-113.092972,1.51)); +#251181 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#251182 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251183 = ADVANCED_FACE('',(#251184),#251209,.T.); +#251184 = FACE_BOUND('',#251185,.T.); +#251185 = EDGE_LOOP('',(#251186,#251187,#251195,#251203)); +#251186 = ORIENTED_EDGE('',*,*,#251165,.T.); +#251187 = ORIENTED_EDGE('',*,*,#251188,.T.); +#251188 = EDGE_CURVE('',#251158,#251189,#251191,.T.); +#251189 = VERTEX_POINT('',#251190); +#251190 = CARTESIAN_POINT('',(121.32902,-112.901921,1.545)); +#251191 = LINE('',#251192,#251193); +#251192 = CARTESIAN_POINT('',(121.292972,-112.916853,1.545)); +#251193 = VECTOR('',#251194,1.); +#251194 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#251195 = ORIENTED_EDGE('',*,*,#251196,.F.); +#251196 = EDGE_CURVE('',#251197,#251189,#251199,.T.); +#251197 = VERTEX_POINT('',#251198); +#251198 = CARTESIAN_POINT('',(121.32902,-112.901921,1.51)); +#251199 = LINE('',#251200,#251201); +#251200 = CARTESIAN_POINT('',(121.32902,-112.901921,1.51)); +#251201 = VECTOR('',#251202,1.); +#251202 = DIRECTION('',(0.,0.,1.)); +#251203 = ORIENTED_EDGE('',*,*,#251204,.F.); +#251204 = EDGE_CURVE('',#251166,#251197,#251205,.T.); +#251205 = LINE('',#251206,#251207); +#251206 = CARTESIAN_POINT('',(121.292972,-112.916853,1.51)); +#251207 = VECTOR('',#251208,1.); +#251208 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#251209 = PLANE('',#251210); +#251210 = AXIS2_PLACEMENT_3D('',#251211,#251212,#251213); +#251211 = CARTESIAN_POINT('',(121.292972,-112.916853,1.51)); +#251212 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#251213 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#251214 = ADVANCED_FACE('',(#251215),#251240,.T.); +#251215 = FACE_BOUND('',#251216,.T.); +#251216 = EDGE_LOOP('',(#251217,#251218,#251226,#251234)); +#251217 = ORIENTED_EDGE('',*,*,#251196,.T.); +#251218 = ORIENTED_EDGE('',*,*,#251219,.T.); +#251219 = EDGE_CURVE('',#251189,#251220,#251222,.T.); +#251220 = VERTEX_POINT('',#251221); +#251221 = CARTESIAN_POINT('',(121.375734,-112.9,1.545)); +#251222 = LINE('',#251223,#251224); +#251223 = CARTESIAN_POINT('',(121.32902,-112.901921,1.545)); +#251224 = VECTOR('',#251225,1.); +#251225 = DIRECTION('',(0.999155537765,4.108784921102E-02,0.)); +#251226 = ORIENTED_EDGE('',*,*,#251227,.F.); +#251227 = EDGE_CURVE('',#251228,#251220,#251230,.T.); +#251228 = VERTEX_POINT('',#251229); +#251229 = CARTESIAN_POINT('',(121.375734,-112.9,1.51)); +#251230 = LINE('',#251231,#251232); +#251231 = CARTESIAN_POINT('',(121.375734,-112.9,1.51)); +#251232 = VECTOR('',#251233,1.); +#251233 = DIRECTION('',(0.,0.,1.)); +#251234 = ORIENTED_EDGE('',*,*,#251235,.F.); +#251235 = EDGE_CURVE('',#251197,#251228,#251236,.T.); +#251236 = LINE('',#251237,#251238); +#251237 = CARTESIAN_POINT('',(121.32902,-112.901921,1.51)); +#251238 = VECTOR('',#251239,1.); +#251239 = DIRECTION('',(0.999155537765,4.108784921102E-02,0.)); +#251240 = PLANE('',#251241); +#251241 = AXIS2_PLACEMENT_3D('',#251242,#251243,#251244); +#251242 = CARTESIAN_POINT('',(121.32902,-112.901921,1.51)); +#251243 = DIRECTION('',(-4.108784921102E-02,0.999155537765,0.)); +#251244 = DIRECTION('',(0.999155537765,4.108784921102E-02,0.)); +#251245 = ADVANCED_FACE('',(#251246),#251271,.T.); +#251246 = FACE_BOUND('',#251247,.T.); +#251247 = EDGE_LOOP('',(#251248,#251249,#251257,#251265)); +#251248 = ORIENTED_EDGE('',*,*,#251227,.T.); +#251249 = ORIENTED_EDGE('',*,*,#251250,.T.); +#251250 = EDGE_CURVE('',#251220,#251251,#251253,.T.); +#251251 = VERTEX_POINT('',#251252); +#251252 = CARTESIAN_POINT('',(121.551471,-112.724264,1.545)); +#251253 = LINE('',#251254,#251255); +#251254 = CARTESIAN_POINT('',(121.375734,-112.9,1.545)); +#251255 = VECTOR('',#251256,1.); +#251256 = DIRECTION('',(0.707108793022,0.707104769346,0.)); +#251257 = ORIENTED_EDGE('',*,*,#251258,.F.); +#251258 = EDGE_CURVE('',#251259,#251251,#251261,.T.); +#251259 = VERTEX_POINT('',#251260); +#251260 = CARTESIAN_POINT('',(121.551471,-112.724264,1.51)); +#251261 = LINE('',#251262,#251263); +#251262 = CARTESIAN_POINT('',(121.551471,-112.724264,1.51)); +#251263 = VECTOR('',#251264,1.); +#251264 = DIRECTION('',(0.,0.,1.)); +#251265 = ORIENTED_EDGE('',*,*,#251266,.F.); +#251266 = EDGE_CURVE('',#251228,#251259,#251267,.T.); +#251267 = LINE('',#251268,#251269); +#251268 = CARTESIAN_POINT('',(121.375734,-112.9,1.51)); +#251269 = VECTOR('',#251270,1.); +#251270 = DIRECTION('',(0.707108793022,0.707104769346,0.)); +#251271 = PLANE('',#251272); +#251272 = AXIS2_PLACEMENT_3D('',#251273,#251274,#251275); +#251273 = CARTESIAN_POINT('',(121.375734,-112.9,1.51)); +#251274 = DIRECTION('',(-0.707104769346,0.707108793022,0.)); +#251275 = DIRECTION('',(0.707108793022,0.707104769346,0.)); +#251276 = ADVANCED_FACE('',(#251277),#251302,.T.); +#251277 = FACE_BOUND('',#251278,.T.); +#251278 = EDGE_LOOP('',(#251279,#251280,#251288,#251296)); +#251279 = ORIENTED_EDGE('',*,*,#251258,.T.); +#251280 = ORIENTED_EDGE('',*,*,#251281,.T.); +#251281 = EDGE_CURVE('',#251251,#251282,#251284,.T.); +#251282 = VERTEX_POINT('',#251283); +#251283 = CARTESIAN_POINT('',(121.553392,-112.677549,1.545)); +#251284 = LINE('',#251285,#251286); +#251285 = CARTESIAN_POINT('',(121.551471,-112.724264,1.545)); +#251286 = VECTOR('',#251287,1.); +#251287 = DIRECTION('',(4.108697115286E-02,0.999155573873,0.)); +#251288 = ORIENTED_EDGE('',*,*,#251289,.F.); +#251289 = EDGE_CURVE('',#251290,#251282,#251292,.T.); +#251290 = VERTEX_POINT('',#251291); +#251291 = CARTESIAN_POINT('',(121.553392,-112.677549,1.51)); +#251292 = LINE('',#251293,#251294); +#251293 = CARTESIAN_POINT('',(121.553392,-112.677549,1.51)); +#251294 = VECTOR('',#251295,1.); +#251295 = DIRECTION('',(0.,0.,1.)); +#251296 = ORIENTED_EDGE('',*,*,#251297,.F.); +#251297 = EDGE_CURVE('',#251259,#251290,#251298,.T.); +#251298 = LINE('',#251299,#251300); +#251299 = CARTESIAN_POINT('',(121.551471,-112.724264,1.51)); +#251300 = VECTOR('',#251301,1.); +#251301 = DIRECTION('',(4.108697115286E-02,0.999155573873,0.)); +#251302 = PLANE('',#251303); +#251303 = AXIS2_PLACEMENT_3D('',#251304,#251305,#251306); +#251304 = CARTESIAN_POINT('',(121.551471,-112.724264,1.51)); +#251305 = DIRECTION('',(-0.999155573873,4.108697115286E-02,0.)); +#251306 = DIRECTION('',(4.108697115286E-02,0.999155573873,0.)); +#251307 = ADVANCED_FACE('',(#251308),#251333,.T.); +#251308 = FACE_BOUND('',#251309,.T.); +#251309 = EDGE_LOOP('',(#251310,#251311,#251319,#251327)); +#251310 = ORIENTED_EDGE('',*,*,#251289,.T.); +#251311 = ORIENTED_EDGE('',*,*,#251312,.T.); +#251312 = EDGE_CURVE('',#251282,#251313,#251315,.T.); +#251313 = VERTEX_POINT('',#251314); +#251314 = CARTESIAN_POINT('',(121.568324,-112.641501,1.545)); +#251315 = LINE('',#251316,#251317); +#251316 = CARTESIAN_POINT('',(121.553392,-112.677549,1.545)); +#251317 = VECTOR('',#251318,1.); +#251318 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251319 = ORIENTED_EDGE('',*,*,#251320,.F.); +#251320 = EDGE_CURVE('',#251321,#251313,#251323,.T.); +#251321 = VERTEX_POINT('',#251322); +#251322 = CARTESIAN_POINT('',(121.568324,-112.641501,1.51)); +#251323 = LINE('',#251324,#251325); +#251324 = CARTESIAN_POINT('',(121.568324,-112.641501,1.51)); +#251325 = VECTOR('',#251326,1.); +#251326 = DIRECTION('',(0.,0.,1.)); +#251327 = ORIENTED_EDGE('',*,*,#251328,.F.); +#251328 = EDGE_CURVE('',#251290,#251321,#251329,.T.); +#251329 = LINE('',#251330,#251331); +#251330 = CARTESIAN_POINT('',(121.553392,-112.677549,1.51)); +#251331 = VECTOR('',#251332,1.); +#251332 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251333 = PLANE('',#251334); +#251334 = AXIS2_PLACEMENT_3D('',#251335,#251336,#251337); +#251335 = CARTESIAN_POINT('',(121.553392,-112.677549,1.51)); +#251336 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251337 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251338 = ADVANCED_FACE('',(#251339),#251364,.T.); +#251339 = FACE_BOUND('',#251340,.T.); +#251340 = EDGE_LOOP('',(#251341,#251342,#251350,#251358)); +#251341 = ORIENTED_EDGE('',*,*,#251320,.T.); +#251342 = ORIENTED_EDGE('',*,*,#251343,.T.); +#251343 = EDGE_CURVE('',#251313,#251344,#251346,.T.); +#251344 = VERTEX_POINT('',#251345); +#251345 = CARTESIAN_POINT('',(123.711358,-110.495749,1.545)); +#251346 = LINE('',#251347,#251348); +#251347 = CARTESIAN_POINT('',(121.568324,-112.641501,1.545)); +#251348 = VECTOR('',#251349,1.); +#251349 = DIRECTION('',(0.706658513344,0.707554765031,0.)); +#251350 = ORIENTED_EDGE('',*,*,#251351,.F.); +#251351 = EDGE_CURVE('',#251352,#251344,#251354,.T.); +#251352 = VERTEX_POINT('',#251353); +#251353 = CARTESIAN_POINT('',(123.711358,-110.495749,1.51)); +#251354 = LINE('',#251355,#251356); +#251355 = CARTESIAN_POINT('',(123.711358,-110.495749,1.51)); +#251356 = VECTOR('',#251357,1.); +#251357 = DIRECTION('',(0.,0.,1.)); +#251358 = ORIENTED_EDGE('',*,*,#251359,.F.); +#251359 = EDGE_CURVE('',#251321,#251352,#251360,.T.); +#251360 = LINE('',#251361,#251362); +#251361 = CARTESIAN_POINT('',(121.568324,-112.641501,1.51)); +#251362 = VECTOR('',#251363,1.); +#251363 = DIRECTION('',(0.706658513344,0.707554765031,0.)); +#251364 = PLANE('',#251365); +#251365 = AXIS2_PLACEMENT_3D('',#251366,#251367,#251368); +#251366 = CARTESIAN_POINT('',(121.568324,-112.641501,1.51)); +#251367 = DIRECTION('',(-0.707554765031,0.706658513344,0.)); +#251368 = DIRECTION('',(0.706658513344,0.707554765031,0.)); +#251369 = ADVANCED_FACE('',(#251370),#251395,.T.); +#251370 = FACE_BOUND('',#251371,.T.); +#251371 = EDGE_LOOP('',(#251372,#251373,#251381,#251389)); +#251372 = ORIENTED_EDGE('',*,*,#251351,.T.); +#251373 = ORIENTED_EDGE('',*,*,#251374,.T.); +#251374 = EDGE_CURVE('',#251344,#251375,#251377,.T.); +#251375 = VERTEX_POINT('',#251376); +#251376 = CARTESIAN_POINT('',(123.713279,-103.980491,1.545)); +#251377 = LINE('',#251378,#251379); +#251378 = CARTESIAN_POINT('',(123.711358,-110.495749,1.545)); +#251379 = VECTOR('',#251380,1.); +#251380 = DIRECTION('',(2.948463309504E-04,0.999999956533,0.)); +#251381 = ORIENTED_EDGE('',*,*,#251382,.F.); +#251382 = EDGE_CURVE('',#251383,#251375,#251385,.T.); +#251383 = VERTEX_POINT('',#251384); +#251384 = CARTESIAN_POINT('',(123.713279,-103.980491,1.51)); +#251385 = LINE('',#251386,#251387); +#251386 = CARTESIAN_POINT('',(123.713279,-103.980491,1.51)); +#251387 = VECTOR('',#251388,1.); +#251388 = DIRECTION('',(0.,0.,1.)); +#251389 = ORIENTED_EDGE('',*,*,#251390,.F.); +#251390 = EDGE_CURVE('',#251352,#251383,#251391,.T.); +#251391 = LINE('',#251392,#251393); +#251392 = CARTESIAN_POINT('',(123.711358,-110.495749,1.51)); +#251393 = VECTOR('',#251394,1.); +#251394 = DIRECTION('',(2.948463309504E-04,0.999999956533,0.)); +#251395 = PLANE('',#251396); +#251396 = AXIS2_PLACEMENT_3D('',#251397,#251398,#251399); +#251397 = CARTESIAN_POINT('',(123.711358,-110.495749,1.51)); +#251398 = DIRECTION('',(-0.999999956533,2.948463309504E-04,0.)); +#251399 = DIRECTION('',(2.948463309504E-04,0.999999956533,0.)); +#251400 = ADVANCED_FACE('',(#251401),#251426,.T.); +#251401 = FACE_BOUND('',#251402,.T.); +#251402 = EDGE_LOOP('',(#251403,#251404,#251412,#251420)); +#251403 = ORIENTED_EDGE('',*,*,#251382,.T.); +#251404 = ORIENTED_EDGE('',*,*,#251405,.T.); +#251405 = EDGE_CURVE('',#251375,#251406,#251408,.T.); +#251406 = VERTEX_POINT('',#251407); +#251407 = CARTESIAN_POINT('',(123.728211,-103.944443,1.545)); +#251408 = LINE('',#251409,#251410); +#251409 = CARTESIAN_POINT('',(123.713279,-103.980491,1.545)); +#251410 = VECTOR('',#251411,1.); +#251411 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251412 = ORIENTED_EDGE('',*,*,#251413,.F.); +#251413 = EDGE_CURVE('',#251414,#251406,#251416,.T.); +#251414 = VERTEX_POINT('',#251415); +#251415 = CARTESIAN_POINT('',(123.728211,-103.944443,1.51)); +#251416 = LINE('',#251417,#251418); +#251417 = CARTESIAN_POINT('',(123.728211,-103.944443,1.51)); +#251418 = VECTOR('',#251419,1.); +#251419 = DIRECTION('',(0.,0.,1.)); +#251420 = ORIENTED_EDGE('',*,*,#251421,.F.); +#251421 = EDGE_CURVE('',#251383,#251414,#251422,.T.); +#251422 = LINE('',#251423,#251424); +#251423 = CARTESIAN_POINT('',(123.713279,-103.980491,1.51)); +#251424 = VECTOR('',#251425,1.); +#251425 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251426 = PLANE('',#251427); +#251427 = AXIS2_PLACEMENT_3D('',#251428,#251429,#251430); +#251428 = CARTESIAN_POINT('',(123.713279,-103.980491,1.51)); +#251429 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251430 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251431 = ADVANCED_FACE('',(#251432),#251457,.T.); +#251432 = FACE_BOUND('',#251433,.T.); +#251433 = EDGE_LOOP('',(#251434,#251435,#251443,#251451)); +#251434 = ORIENTED_EDGE('',*,*,#251413,.T.); +#251435 = ORIENTED_EDGE('',*,*,#251436,.T.); +#251436 = EDGE_CURVE('',#251406,#251437,#251439,.T.); +#251437 = VERTEX_POINT('',#251438); +#251438 = CARTESIAN_POINT('',(127.75,-99.919936,1.545)); +#251439 = LINE('',#251440,#251441); +#251440 = CARTESIAN_POINT('',(123.728211,-103.944443,1.545)); +#251441 = VECTOR('',#251442,1.); +#251442 = DIRECTION('',(0.706867883596,0.707345598092,0.)); +#251443 = ORIENTED_EDGE('',*,*,#251444,.F.); +#251444 = EDGE_CURVE('',#251445,#251437,#251447,.T.); +#251445 = VERTEX_POINT('',#251446); +#251446 = CARTESIAN_POINT('',(127.75,-99.919936,1.51)); +#251447 = LINE('',#251448,#251449); +#251448 = CARTESIAN_POINT('',(127.75,-99.919936,1.51)); +#251449 = VECTOR('',#251450,1.); +#251450 = DIRECTION('',(0.,0.,1.)); +#251451 = ORIENTED_EDGE('',*,*,#251452,.F.); +#251452 = EDGE_CURVE('',#251414,#251445,#251453,.T.); +#251453 = LINE('',#251454,#251455); +#251454 = CARTESIAN_POINT('',(123.728211,-103.944443,1.51)); +#251455 = VECTOR('',#251456,1.); +#251456 = DIRECTION('',(0.706867883596,0.707345598092,0.)); +#251457 = PLANE('',#251458); +#251458 = AXIS2_PLACEMENT_3D('',#251459,#251460,#251461); +#251459 = CARTESIAN_POINT('',(123.728211,-103.944443,1.51)); +#251460 = DIRECTION('',(-0.707345598092,0.706867883596,0.)); +#251461 = DIRECTION('',(0.706867883596,0.707345598092,0.)); +#251462 = ADVANCED_FACE('',(#251463),#251488,.T.); +#251463 = FACE_BOUND('',#251464,.T.); +#251464 = EDGE_LOOP('',(#251465,#251466,#251474,#251482)); +#251465 = ORIENTED_EDGE('',*,*,#251444,.T.); +#251466 = ORIENTED_EDGE('',*,*,#251467,.T.); +#251467 = EDGE_CURVE('',#251437,#251468,#251470,.T.); +#251468 = VERTEX_POINT('',#251469); +#251469 = CARTESIAN_POINT('',(127.751921,-82.540491,1.545)); +#251470 = LINE('',#251471,#251472); +#251471 = CARTESIAN_POINT('',(127.75,-99.919936,1.545)); +#251472 = VECTOR('',#251473,1.); +#251473 = DIRECTION('',(1.105328730728E-04,0.999999993891,0.)); +#251474 = ORIENTED_EDGE('',*,*,#251475,.F.); +#251475 = EDGE_CURVE('',#251476,#251468,#251478,.T.); +#251476 = VERTEX_POINT('',#251477); +#251477 = CARTESIAN_POINT('',(127.751921,-82.540491,1.51)); +#251478 = LINE('',#251479,#251480); +#251479 = CARTESIAN_POINT('',(127.751921,-82.540491,1.51)); +#251480 = VECTOR('',#251481,1.); +#251481 = DIRECTION('',(0.,0.,1.)); +#251482 = ORIENTED_EDGE('',*,*,#251483,.F.); +#251483 = EDGE_CURVE('',#251445,#251476,#251484,.T.); +#251484 = LINE('',#251485,#251486); +#251485 = CARTESIAN_POINT('',(127.75,-99.919936,1.51)); +#251486 = VECTOR('',#251487,1.); +#251487 = DIRECTION('',(1.105328730728E-04,0.999999993891,0.)); +#251488 = PLANE('',#251489); +#251489 = AXIS2_PLACEMENT_3D('',#251490,#251491,#251492); +#251490 = CARTESIAN_POINT('',(127.75,-99.919936,1.51)); +#251491 = DIRECTION('',(-0.999999993891,1.105328730728E-04,0.)); +#251492 = DIRECTION('',(1.105328730728E-04,0.999999993891,0.)); +#251493 = ADVANCED_FACE('',(#251494),#251519,.T.); +#251494 = FACE_BOUND('',#251495,.T.); +#251495 = EDGE_LOOP('',(#251496,#251497,#251505,#251513)); +#251496 = ORIENTED_EDGE('',*,*,#251475,.T.); +#251497 = ORIENTED_EDGE('',*,*,#251498,.T.); +#251498 = EDGE_CURVE('',#251468,#251499,#251501,.T.); +#251499 = VERTEX_POINT('',#251500); +#251500 = CARTESIAN_POINT('',(127.766853,-82.504443,1.545)); +#251501 = LINE('',#251502,#251503); +#251502 = CARTESIAN_POINT('',(127.751921,-82.540491,1.545)); +#251503 = VECTOR('',#251504,1.); +#251504 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251505 = ORIENTED_EDGE('',*,*,#251506,.F.); +#251506 = EDGE_CURVE('',#251507,#251499,#251509,.T.); +#251507 = VERTEX_POINT('',#251508); +#251508 = CARTESIAN_POINT('',(127.766853,-82.504443,1.51)); +#251509 = LINE('',#251510,#251511); +#251510 = CARTESIAN_POINT('',(127.766853,-82.504443,1.51)); +#251511 = VECTOR('',#251512,1.); +#251512 = DIRECTION('',(0.,0.,1.)); +#251513 = ORIENTED_EDGE('',*,*,#251514,.F.); +#251514 = EDGE_CURVE('',#251476,#251507,#251515,.T.); +#251515 = LINE('',#251516,#251517); +#251516 = CARTESIAN_POINT('',(127.751921,-82.540491,1.51)); +#251517 = VECTOR('',#251518,1.); +#251518 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251519 = PLANE('',#251520); +#251520 = AXIS2_PLACEMENT_3D('',#251521,#251522,#251523); +#251521 = CARTESIAN_POINT('',(127.751921,-82.540491,1.51)); +#251522 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251523 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251524 = ADVANCED_FACE('',(#251525),#251541,.T.); +#251525 = FACE_BOUND('',#251526,.T.); +#251526 = EDGE_LOOP('',(#251527,#251528,#251534,#251535)); +#251527 = ORIENTED_EDGE('',*,*,#251506,.T.); +#251528 = ORIENTED_EDGE('',*,*,#251529,.T.); +#251529 = EDGE_CURVE('',#251499,#250309,#251530,.T.); +#251530 = LINE('',#251531,#251532); +#251531 = CARTESIAN_POINT('',(127.766853,-82.504443,1.545)); +#251532 = VECTOR('',#251533,1.); +#251533 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251534 = ORIENTED_EDGE('',*,*,#250306,.F.); +#251535 = ORIENTED_EDGE('',*,*,#251536,.F.); +#251536 = EDGE_CURVE('',#251507,#250307,#251537,.T.); +#251537 = LINE('',#251538,#251539); +#251538 = CARTESIAN_POINT('',(127.766853,-82.504443,1.51)); +#251539 = VECTOR('',#251540,1.); +#251540 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251541 = PLANE('',#251542); +#251542 = AXIS2_PLACEMENT_3D('',#251543,#251544,#251545); +#251543 = CARTESIAN_POINT('',(127.766853,-82.504443,1.51)); +#251544 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#251545 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#251546 = ADVANCED_FACE('',(#251547),#251589,.F.); +#251547 = FACE_BOUND('',#251548,.T.); +#251548 = EDGE_LOOP('',(#251549,#251550,#251551,#251552,#251553,#251554, + #251555,#251556,#251557,#251558,#251559,#251560,#251561,#251562, + #251563,#251564,#251565,#251566,#251567,#251568,#251569,#251570, + #251571,#251572,#251573,#251574,#251575,#251576,#251577,#251578, + #251579,#251580,#251581,#251582,#251583,#251584,#251585,#251586, + #251587,#251588)); +#251549 = ORIENTED_EDGE('',*,*,#250333,.T.); +#251550 = ORIENTED_EDGE('',*,*,#250365,.T.); +#251551 = ORIENTED_EDGE('',*,*,#250396,.T.); +#251552 = ORIENTED_EDGE('',*,*,#250427,.T.); +#251553 = ORIENTED_EDGE('',*,*,#250458,.T.); +#251554 = ORIENTED_EDGE('',*,*,#250489,.T.); +#251555 = ORIENTED_EDGE('',*,*,#250520,.T.); +#251556 = ORIENTED_EDGE('',*,*,#250551,.T.); +#251557 = ORIENTED_EDGE('',*,*,#250582,.T.); +#251558 = ORIENTED_EDGE('',*,*,#250613,.T.); +#251559 = ORIENTED_EDGE('',*,*,#250644,.T.); +#251560 = ORIENTED_EDGE('',*,*,#250675,.T.); +#251561 = ORIENTED_EDGE('',*,*,#250706,.T.); +#251562 = ORIENTED_EDGE('',*,*,#250737,.T.); +#251563 = ORIENTED_EDGE('',*,*,#250768,.T.); +#251564 = ORIENTED_EDGE('',*,*,#250799,.T.); +#251565 = ORIENTED_EDGE('',*,*,#250830,.T.); +#251566 = ORIENTED_EDGE('',*,*,#250861,.T.); +#251567 = ORIENTED_EDGE('',*,*,#250892,.T.); +#251568 = ORIENTED_EDGE('',*,*,#250924,.T.); +#251569 = ORIENTED_EDGE('',*,*,#250956,.T.); +#251570 = ORIENTED_EDGE('',*,*,#250987,.T.); +#251571 = ORIENTED_EDGE('',*,*,#251018,.T.); +#251572 = ORIENTED_EDGE('',*,*,#251049,.T.); +#251573 = ORIENTED_EDGE('',*,*,#251080,.T.); +#251574 = ORIENTED_EDGE('',*,*,#251111,.T.); +#251575 = ORIENTED_EDGE('',*,*,#251142,.T.); +#251576 = ORIENTED_EDGE('',*,*,#251173,.T.); +#251577 = ORIENTED_EDGE('',*,*,#251204,.T.); +#251578 = ORIENTED_EDGE('',*,*,#251235,.T.); +#251579 = ORIENTED_EDGE('',*,*,#251266,.T.); +#251580 = ORIENTED_EDGE('',*,*,#251297,.T.); +#251581 = ORIENTED_EDGE('',*,*,#251328,.T.); +#251582 = ORIENTED_EDGE('',*,*,#251359,.T.); +#251583 = ORIENTED_EDGE('',*,*,#251390,.T.); +#251584 = ORIENTED_EDGE('',*,*,#251421,.T.); +#251585 = ORIENTED_EDGE('',*,*,#251452,.T.); +#251586 = ORIENTED_EDGE('',*,*,#251483,.T.); +#251587 = ORIENTED_EDGE('',*,*,#251514,.T.); +#251588 = ORIENTED_EDGE('',*,*,#251536,.T.); +#251589 = PLANE('',#251590); +#251590 = AXIS2_PLACEMENT_3D('',#251591,#251592,#251593); +#251591 = CARTESIAN_POINT('',(0.,0.,1.51)); +#251592 = DIRECTION('',(0.,0.,1.)); +#251593 = DIRECTION('',(1.,0.,-0.)); +#251594 = ADVANCED_FACE('',(#251595),#251637,.T.); +#251595 = FACE_BOUND('',#251596,.F.); +#251596 = EDGE_LOOP('',(#251597,#251598,#251599,#251600,#251601,#251602, + #251603,#251604,#251605,#251606,#251607,#251608,#251609,#251610, + #251611,#251612,#251613,#251614,#251615,#251616,#251617,#251618, + #251619,#251620,#251621,#251622,#251623,#251624,#251625,#251626, + #251627,#251628,#251629,#251630,#251631,#251632,#251633,#251634, + #251635,#251636)); +#251597 = ORIENTED_EDGE('',*,*,#250316,.T.); +#251598 = ORIENTED_EDGE('',*,*,#250349,.T.); +#251599 = ORIENTED_EDGE('',*,*,#250380,.T.); +#251600 = ORIENTED_EDGE('',*,*,#250411,.T.); +#251601 = ORIENTED_EDGE('',*,*,#250442,.T.); +#251602 = ORIENTED_EDGE('',*,*,#250473,.T.); +#251603 = ORIENTED_EDGE('',*,*,#250504,.T.); +#251604 = ORIENTED_EDGE('',*,*,#250535,.T.); +#251605 = ORIENTED_EDGE('',*,*,#250566,.T.); +#251606 = ORIENTED_EDGE('',*,*,#250597,.T.); +#251607 = ORIENTED_EDGE('',*,*,#250628,.T.); +#251608 = ORIENTED_EDGE('',*,*,#250659,.T.); +#251609 = ORIENTED_EDGE('',*,*,#250690,.T.); +#251610 = ORIENTED_EDGE('',*,*,#250721,.T.); +#251611 = ORIENTED_EDGE('',*,*,#250752,.T.); +#251612 = ORIENTED_EDGE('',*,*,#250783,.T.); +#251613 = ORIENTED_EDGE('',*,*,#250814,.T.); +#251614 = ORIENTED_EDGE('',*,*,#250845,.T.); +#251615 = ORIENTED_EDGE('',*,*,#250876,.T.); +#251616 = ORIENTED_EDGE('',*,*,#250907,.T.); +#251617 = ORIENTED_EDGE('',*,*,#250940,.T.); +#251618 = ORIENTED_EDGE('',*,*,#250971,.T.); +#251619 = ORIENTED_EDGE('',*,*,#251002,.T.); +#251620 = ORIENTED_EDGE('',*,*,#251033,.T.); +#251621 = ORIENTED_EDGE('',*,*,#251064,.T.); +#251622 = ORIENTED_EDGE('',*,*,#251095,.T.); +#251623 = ORIENTED_EDGE('',*,*,#251126,.T.); +#251624 = ORIENTED_EDGE('',*,*,#251157,.T.); +#251625 = ORIENTED_EDGE('',*,*,#251188,.T.); +#251626 = ORIENTED_EDGE('',*,*,#251219,.T.); +#251627 = ORIENTED_EDGE('',*,*,#251250,.T.); +#251628 = ORIENTED_EDGE('',*,*,#251281,.T.); +#251629 = ORIENTED_EDGE('',*,*,#251312,.T.); +#251630 = ORIENTED_EDGE('',*,*,#251343,.T.); +#251631 = ORIENTED_EDGE('',*,*,#251374,.T.); +#251632 = ORIENTED_EDGE('',*,*,#251405,.T.); +#251633 = ORIENTED_EDGE('',*,*,#251436,.T.); +#251634 = ORIENTED_EDGE('',*,*,#251467,.T.); +#251635 = ORIENTED_EDGE('',*,*,#251498,.T.); +#251636 = ORIENTED_EDGE('',*,*,#251529,.T.); +#251637 = PLANE('',#251638); +#251638 = AXIS2_PLACEMENT_3D('',#251639,#251640,#251641); +#251639 = CARTESIAN_POINT('',(0.,0.,1.545)); +#251640 = DIRECTION('',(0.,0.,1.)); +#251641 = DIRECTION('',(1.,0.,-0.)); +#251642 = MANIFOLD_SOLID_BREP('',#251643); +#251643 = CLOSED_SHELL('',(#251644,#251684,#251715,#251746,#251777, + #251808,#251841,#251872,#251903,#251934,#251965,#251996,#252029, + #252051,#252084,#252108)); +#251644 = ADVANCED_FACE('',(#251645),#251679,.T.); +#251645 = FACE_BOUND('',#251646,.T.); +#251646 = EDGE_LOOP('',(#251647,#251657,#251665,#251673)); +#251647 = ORIENTED_EDGE('',*,*,#251648,.T.); +#251648 = EDGE_CURVE('',#251649,#251651,#251653,.T.); +#251649 = VERTEX_POINT('',#251650); +#251650 = CARTESIAN_POINT('',(127.027876,-84.129071,1.51)); +#251651 = VERTEX_POINT('',#251652); +#251652 = CARTESIAN_POINT('',(127.027876,-84.129071,1.545)); +#251653 = LINE('',#251654,#251655); +#251654 = CARTESIAN_POINT('',(127.027876,-84.129071,1.51)); +#251655 = VECTOR('',#251656,1.); +#251656 = DIRECTION('',(0.,0.,1.)); +#251657 = ORIENTED_EDGE('',*,*,#251658,.T.); +#251658 = EDGE_CURVE('',#251651,#251659,#251661,.T.); +#251659 = VERTEX_POINT('',#251660); +#251660 = CARTESIAN_POINT('',(127.048079,-84.171542,1.545)); +#251661 = LINE('',#251662,#251663); +#251662 = CARTESIAN_POINT('',(127.027876,-84.129071,1.545)); +#251663 = VECTOR('',#251664,1.); +#251664 = DIRECTION('',(0.429564616013,-0.903036123679,0.)); +#251665 = ORIENTED_EDGE('',*,*,#251666,.F.); +#251666 = EDGE_CURVE('',#251667,#251659,#251669,.T.); +#251667 = VERTEX_POINT('',#251668); +#251668 = CARTESIAN_POINT('',(127.048079,-84.171542,1.51)); +#251669 = LINE('',#251670,#251671); +#251670 = CARTESIAN_POINT('',(127.048079,-84.171542,1.51)); +#251671 = VECTOR('',#251672,1.); +#251672 = DIRECTION('',(0.,0.,1.)); +#251673 = ORIENTED_EDGE('',*,*,#251674,.F.); +#251674 = EDGE_CURVE('',#251649,#251667,#251675,.T.); +#251675 = LINE('',#251676,#251677); +#251676 = CARTESIAN_POINT('',(127.027876,-84.129071,1.51)); +#251677 = VECTOR('',#251678,1.); +#251678 = DIRECTION('',(0.429564616013,-0.903036123679,0.)); +#251679 = PLANE('',#251680); +#251680 = AXIS2_PLACEMENT_3D('',#251681,#251682,#251683); +#251681 = CARTESIAN_POINT('',(127.027876,-84.129071,1.51)); +#251682 = DIRECTION('',(0.903036123679,0.429564616013,-0.)); +#251683 = DIRECTION('',(0.429564616013,-0.903036123679,0.)); +#251684 = ADVANCED_FACE('',(#251685),#251710,.T.); +#251685 = FACE_BOUND('',#251686,.T.); +#251686 = EDGE_LOOP('',(#251687,#251688,#251696,#251704)); +#251687 = ORIENTED_EDGE('',*,*,#251666,.T.); +#251688 = ORIENTED_EDGE('',*,*,#251689,.T.); +#251689 = EDGE_CURVE('',#251659,#251690,#251692,.T.); +#251690 = VERTEX_POINT('',#251691); +#251691 = CARTESIAN_POINT('',(127.048079,-87.469509,1.545)); +#251692 = LINE('',#251693,#251694); +#251693 = CARTESIAN_POINT('',(127.048079,-84.171542,1.545)); +#251694 = VECTOR('',#251695,1.); +#251695 = DIRECTION('',(0.,-1.,0.)); +#251696 = ORIENTED_EDGE('',*,*,#251697,.F.); +#251697 = EDGE_CURVE('',#251698,#251690,#251700,.T.); +#251698 = VERTEX_POINT('',#251699); +#251699 = CARTESIAN_POINT('',(127.048079,-87.469509,1.51)); +#251700 = LINE('',#251701,#251702); +#251701 = CARTESIAN_POINT('',(127.048079,-87.469509,1.51)); +#251702 = VECTOR('',#251703,1.); +#251703 = DIRECTION('',(0.,0.,1.)); +#251704 = ORIENTED_EDGE('',*,*,#251705,.F.); +#251705 = EDGE_CURVE('',#251667,#251698,#251706,.T.); +#251706 = LINE('',#251707,#251708); +#251707 = CARTESIAN_POINT('',(127.048079,-84.171542,1.51)); +#251708 = VECTOR('',#251709,1.); +#251709 = DIRECTION('',(0.,-1.,0.)); +#251710 = PLANE('',#251711); +#251711 = AXIS2_PLACEMENT_3D('',#251712,#251713,#251714); +#251712 = CARTESIAN_POINT('',(127.048079,-84.171542,1.51)); +#251713 = DIRECTION('',(1.,0.,-0.)); +#251714 = DIRECTION('',(0.,-1.,0.)); +#251715 = ADVANCED_FACE('',(#251716),#251741,.T.); +#251716 = FACE_BOUND('',#251717,.T.); +#251717 = EDGE_LOOP('',(#251718,#251719,#251727,#251735)); +#251718 = ORIENTED_EDGE('',*,*,#251697,.T.); +#251719 = ORIENTED_EDGE('',*,*,#251720,.T.); +#251720 = EDGE_CURVE('',#251690,#251721,#251723,.T.); +#251721 = VERTEX_POINT('',#251722); +#251722 = CARTESIAN_POINT('',(127.033147,-87.505557,1.545)); +#251723 = LINE('',#251724,#251725); +#251724 = CARTESIAN_POINT('',(127.048079,-87.469509,1.545)); +#251725 = VECTOR('',#251726,1.); +#251726 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#251727 = ORIENTED_EDGE('',*,*,#251728,.F.); +#251728 = EDGE_CURVE('',#251729,#251721,#251731,.T.); +#251729 = VERTEX_POINT('',#251730); +#251730 = CARTESIAN_POINT('',(127.033147,-87.505557,1.51)); +#251731 = LINE('',#251732,#251733); +#251732 = CARTESIAN_POINT('',(127.033147,-87.505557,1.51)); +#251733 = VECTOR('',#251734,1.); +#251734 = DIRECTION('',(0.,0.,1.)); +#251735 = ORIENTED_EDGE('',*,*,#251736,.F.); +#251736 = EDGE_CURVE('',#251698,#251729,#251737,.T.); +#251737 = LINE('',#251738,#251739); +#251738 = CARTESIAN_POINT('',(127.048079,-87.469509,1.51)); +#251739 = VECTOR('',#251740,1.); +#251740 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#251741 = PLANE('',#251742); +#251742 = AXIS2_PLACEMENT_3D('',#251743,#251744,#251745); +#251743 = CARTESIAN_POINT('',(127.048079,-87.469509,1.51)); +#251744 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#251745 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#251746 = ADVANCED_FACE('',(#251747),#251772,.T.); +#251747 = FACE_BOUND('',#251748,.T.); +#251748 = EDGE_LOOP('',(#251749,#251750,#251758,#251766)); +#251749 = ORIENTED_EDGE('',*,*,#251728,.T.); +#251750 = ORIENTED_EDGE('',*,*,#251751,.T.); +#251751 = EDGE_CURVE('',#251721,#251752,#251754,.T.); +#251752 = VERTEX_POINT('',#251753); +#251753 = CARTESIAN_POINT('',(126.6,-87.941422,1.545)); +#251754 = LINE('',#251755,#251756); +#251755 = CARTESIAN_POINT('',(127.033147,-87.505557,1.545)); +#251756 = VECTOR('',#251757,1.); +#251757 = DIRECTION('',(-0.704891722721,-0.709314922471,0.)); +#251758 = ORIENTED_EDGE('',*,*,#251759,.F.); +#251759 = EDGE_CURVE('',#251760,#251752,#251762,.T.); +#251760 = VERTEX_POINT('',#251761); +#251761 = CARTESIAN_POINT('',(126.6,-87.941422,1.51)); +#251762 = LINE('',#251763,#251764); +#251763 = CARTESIAN_POINT('',(126.6,-87.941422,1.51)); +#251764 = VECTOR('',#251765,1.); +#251765 = DIRECTION('',(0.,0.,1.)); +#251766 = ORIENTED_EDGE('',*,*,#251767,.F.); +#251767 = EDGE_CURVE('',#251729,#251760,#251768,.T.); +#251768 = LINE('',#251769,#251770); +#251769 = CARTESIAN_POINT('',(127.033147,-87.505557,1.51)); +#251770 = VECTOR('',#251771,1.); +#251771 = DIRECTION('',(-0.704891722721,-0.709314922471,0.)); +#251772 = PLANE('',#251773); +#251773 = AXIS2_PLACEMENT_3D('',#251774,#251775,#251776); +#251774 = CARTESIAN_POINT('',(127.033147,-87.505557,1.51)); +#251775 = DIRECTION('',(0.709314922471,-0.704891722721,0.)); +#251776 = DIRECTION('',(-0.704891722721,-0.709314922471,0.)); +#251777 = ADVANCED_FACE('',(#251778),#251803,.T.); +#251778 = FACE_BOUND('',#251779,.T.); +#251779 = EDGE_LOOP('',(#251780,#251781,#251789,#251797)); +#251780 = ORIENTED_EDGE('',*,*,#251759,.T.); +#251781 = ORIENTED_EDGE('',*,*,#251782,.T.); +#251782 = EDGE_CURVE('',#251752,#251783,#251785,.T.); +#251783 = VERTEX_POINT('',#251784); +#251784 = CARTESIAN_POINT('',(126.598079,-89.119509,1.545)); +#251785 = LINE('',#251786,#251787); +#251786 = CARTESIAN_POINT('',(126.6,-87.941422,1.545)); +#251787 = VECTOR('',#251788,1.); +#251788 = DIRECTION('',(-1.630607456104E-03,-0.999998670559,0.)); +#251789 = ORIENTED_EDGE('',*,*,#251790,.F.); +#251790 = EDGE_CURVE('',#251791,#251783,#251793,.T.); +#251791 = VERTEX_POINT('',#251792); +#251792 = CARTESIAN_POINT('',(126.598079,-89.119509,1.51)); +#251793 = LINE('',#251794,#251795); +#251794 = CARTESIAN_POINT('',(126.598079,-89.119509,1.51)); +#251795 = VECTOR('',#251796,1.); +#251796 = DIRECTION('',(0.,0.,1.)); +#251797 = ORIENTED_EDGE('',*,*,#251798,.F.); +#251798 = EDGE_CURVE('',#251760,#251791,#251799,.T.); +#251799 = LINE('',#251800,#251801); +#251800 = CARTESIAN_POINT('',(126.6,-87.941422,1.51)); +#251801 = VECTOR('',#251802,1.); +#251802 = DIRECTION('',(-1.630607456104E-03,-0.999998670559,0.)); +#251803 = PLANE('',#251804); +#251804 = AXIS2_PLACEMENT_3D('',#251805,#251806,#251807); +#251805 = CARTESIAN_POINT('',(126.6,-87.941422,1.51)); +#251806 = DIRECTION('',(0.999998670559,-1.630607456104E-03,0.)); +#251807 = DIRECTION('',(-1.630607456104E-03,-0.999998670559,0.)); +#251808 = ADVANCED_FACE('',(#251809),#251836,.T.); +#251809 = FACE_BOUND('',#251810,.T.); +#251810 = EDGE_LOOP('',(#251811,#251812,#251821,#251829)); +#251811 = ORIENTED_EDGE('',*,*,#251790,.T.); +#251812 = ORIENTED_EDGE('',*,*,#251813,.T.); +#251813 = EDGE_CURVE('',#251783,#251814,#251816,.T.); +#251814 = VERTEX_POINT('',#251815); +#251815 = CARTESIAN_POINT('',(126.401921,-89.119509,1.545)); +#251816 = CIRCLE('',#251817,0.100000456609); +#251817 = AXIS2_PLACEMENT_3D('',#251818,#251819,#251820); +#251818 = CARTESIAN_POINT('',(126.5,-89.1,1.545)); +#251819 = DIRECTION('',(-0.,0.,-1.)); +#251820 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#251821 = ORIENTED_EDGE('',*,*,#251822,.F.); +#251822 = EDGE_CURVE('',#251823,#251814,#251825,.T.); +#251823 = VERTEX_POINT('',#251824); +#251824 = CARTESIAN_POINT('',(126.401921,-89.119509,1.51)); +#251825 = LINE('',#251826,#251827); +#251826 = CARTESIAN_POINT('',(126.401921,-89.119509,1.51)); +#251827 = VECTOR('',#251828,1.); +#251828 = DIRECTION('',(0.,0.,1.)); +#251829 = ORIENTED_EDGE('',*,*,#251830,.F.); +#251830 = EDGE_CURVE('',#251791,#251823,#251831,.T.); +#251831 = CIRCLE('',#251832,0.100000456609); +#251832 = AXIS2_PLACEMENT_3D('',#251833,#251834,#251835); +#251833 = CARTESIAN_POINT('',(126.5,-89.1,1.51)); +#251834 = DIRECTION('',(-0.,0.,-1.)); +#251835 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#251836 = CYLINDRICAL_SURFACE('',#251837,0.100000456609); +#251837 = AXIS2_PLACEMENT_3D('',#251838,#251839,#251840); +#251838 = CARTESIAN_POINT('',(126.5,-89.1,1.51)); +#251839 = DIRECTION('',(-0.,0.,-1.)); +#251840 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#251841 = ADVANCED_FACE('',(#251842),#251867,.T.); +#251842 = FACE_BOUND('',#251843,.T.); +#251843 = EDGE_LOOP('',(#251844,#251845,#251853,#251861)); +#251844 = ORIENTED_EDGE('',*,*,#251822,.T.); +#251845 = ORIENTED_EDGE('',*,*,#251846,.T.); +#251846 = EDGE_CURVE('',#251814,#251847,#251849,.T.); +#251847 = VERTEX_POINT('',#251848); +#251848 = CARTESIAN_POINT('',(126.401921,-87.880491,1.545)); +#251849 = LINE('',#251850,#251851); +#251850 = CARTESIAN_POINT('',(126.401921,-89.119509,1.545)); +#251851 = VECTOR('',#251852,1.); +#251852 = DIRECTION('',(0.,1.,0.)); +#251853 = ORIENTED_EDGE('',*,*,#251854,.F.); +#251854 = EDGE_CURVE('',#251855,#251847,#251857,.T.); +#251855 = VERTEX_POINT('',#251856); +#251856 = CARTESIAN_POINT('',(126.401921,-87.880491,1.51)); +#251857 = LINE('',#251858,#251859); +#251858 = CARTESIAN_POINT('',(126.401921,-87.880491,1.51)); +#251859 = VECTOR('',#251860,1.); +#251860 = DIRECTION('',(0.,0.,1.)); +#251861 = ORIENTED_EDGE('',*,*,#251862,.F.); +#251862 = EDGE_CURVE('',#251823,#251855,#251863,.T.); +#251863 = LINE('',#251864,#251865); +#251864 = CARTESIAN_POINT('',(126.401921,-89.119509,1.51)); +#251865 = VECTOR('',#251866,1.); +#251866 = DIRECTION('',(0.,1.,0.)); +#251867 = PLANE('',#251868); +#251868 = AXIS2_PLACEMENT_3D('',#251869,#251870,#251871); +#251869 = CARTESIAN_POINT('',(126.401921,-89.119509,1.51)); +#251870 = DIRECTION('',(-1.,0.,0.)); +#251871 = DIRECTION('',(0.,1.,0.)); +#251872 = ADVANCED_FACE('',(#251873),#251898,.T.); +#251873 = FACE_BOUND('',#251874,.T.); +#251874 = EDGE_LOOP('',(#251875,#251876,#251884,#251892)); +#251875 = ORIENTED_EDGE('',*,*,#251854,.T.); +#251876 = ORIENTED_EDGE('',*,*,#251877,.T.); +#251877 = EDGE_CURVE('',#251847,#251878,#251880,.T.); +#251878 = VERTEX_POINT('',#251879); +#251879 = CARTESIAN_POINT('',(126.416853,-87.844443,1.545)); +#251880 = LINE('',#251881,#251882); +#251881 = CARTESIAN_POINT('',(126.401921,-87.880491,1.545)); +#251882 = VECTOR('',#251883,1.); +#251883 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251884 = ORIENTED_EDGE('',*,*,#251885,.F.); +#251885 = EDGE_CURVE('',#251886,#251878,#251888,.T.); +#251886 = VERTEX_POINT('',#251887); +#251887 = CARTESIAN_POINT('',(126.416853,-87.844443,1.51)); +#251888 = LINE('',#251889,#251890); +#251889 = CARTESIAN_POINT('',(126.416853,-87.844443,1.51)); +#251890 = VECTOR('',#251891,1.); +#251891 = DIRECTION('',(0.,0.,1.)); +#251892 = ORIENTED_EDGE('',*,*,#251893,.F.); +#251893 = EDGE_CURVE('',#251855,#251886,#251894,.T.); +#251894 = LINE('',#251895,#251896); +#251895 = CARTESIAN_POINT('',(126.401921,-87.880491,1.51)); +#251896 = VECTOR('',#251897,1.); +#251897 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251898 = PLANE('',#251899); +#251899 = AXIS2_PLACEMENT_3D('',#251900,#251901,#251902); +#251900 = CARTESIAN_POINT('',(126.401921,-87.880491,1.51)); +#251901 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#251902 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#251903 = ADVANCED_FACE('',(#251904),#251929,.T.); +#251904 = FACE_BOUND('',#251905,.T.); +#251905 = EDGE_LOOP('',(#251906,#251907,#251915,#251923)); +#251906 = ORIENTED_EDGE('',*,*,#251885,.T.); +#251907 = ORIENTED_EDGE('',*,*,#251908,.T.); +#251908 = EDGE_CURVE('',#251878,#251909,#251911,.T.); +#251909 = VERTEX_POINT('',#251910); +#251910 = CARTESIAN_POINT('',(126.85,-87.408578,1.545)); +#251911 = LINE('',#251912,#251913); +#251912 = CARTESIAN_POINT('',(126.416853,-87.844443,1.545)); +#251913 = VECTOR('',#251914,1.); +#251914 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#251915 = ORIENTED_EDGE('',*,*,#251916,.F.); +#251916 = EDGE_CURVE('',#251917,#251909,#251919,.T.); +#251917 = VERTEX_POINT('',#251918); +#251918 = CARTESIAN_POINT('',(126.85,-87.408578,1.51)); +#251919 = LINE('',#251920,#251921); +#251920 = CARTESIAN_POINT('',(126.85,-87.408578,1.51)); +#251921 = VECTOR('',#251922,1.); +#251922 = DIRECTION('',(0.,0.,1.)); +#251923 = ORIENTED_EDGE('',*,*,#251924,.F.); +#251924 = EDGE_CURVE('',#251886,#251917,#251925,.T.); +#251925 = LINE('',#251926,#251927); +#251926 = CARTESIAN_POINT('',(126.416853,-87.844443,1.51)); +#251927 = VECTOR('',#251928,1.); +#251928 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#251929 = PLANE('',#251930); +#251930 = AXIS2_PLACEMENT_3D('',#251931,#251932,#251933); +#251931 = CARTESIAN_POINT('',(126.416853,-87.844443,1.51)); +#251932 = DIRECTION('',(-0.709314922471,0.704891722721,0.)); +#251933 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#251934 = ADVANCED_FACE('',(#251935),#251960,.T.); +#251935 = FACE_BOUND('',#251936,.T.); +#251936 = EDGE_LOOP('',(#251937,#251938,#251946,#251954)); +#251937 = ORIENTED_EDGE('',*,*,#251916,.T.); +#251938 = ORIENTED_EDGE('',*,*,#251939,.T.); +#251939 = EDGE_CURVE('',#251909,#251940,#251942,.T.); +#251940 = VERTEX_POINT('',#251941); +#251941 = CARTESIAN_POINT('',(126.85,-84.283528,1.545)); +#251942 = LINE('',#251943,#251944); +#251943 = CARTESIAN_POINT('',(126.85,-87.408578,1.545)); +#251944 = VECTOR('',#251945,1.); +#251945 = DIRECTION('',(0.,1.,0.)); +#251946 = ORIENTED_EDGE('',*,*,#251947,.F.); +#251947 = EDGE_CURVE('',#251948,#251940,#251950,.T.); +#251948 = VERTEX_POINT('',#251949); +#251949 = CARTESIAN_POINT('',(126.85,-84.283528,1.51)); +#251950 = LINE('',#251951,#251952); +#251951 = CARTESIAN_POINT('',(126.85,-84.283528,1.51)); +#251952 = VECTOR('',#251953,1.); +#251953 = DIRECTION('',(0.,0.,1.)); +#251954 = ORIENTED_EDGE('',*,*,#251955,.F.); +#251955 = EDGE_CURVE('',#251917,#251948,#251956,.T.); +#251956 = LINE('',#251957,#251958); +#251957 = CARTESIAN_POINT('',(126.85,-87.408578,1.51)); +#251958 = VECTOR('',#251959,1.); +#251959 = DIRECTION('',(0.,1.,0.)); +#251960 = PLANE('',#251961); +#251961 = AXIS2_PLACEMENT_3D('',#251962,#251963,#251964); +#251962 = CARTESIAN_POINT('',(126.85,-87.408578,1.51)); +#251963 = DIRECTION('',(-1.,0.,0.)); +#251964 = DIRECTION('',(0.,1.,0.)); +#251965 = ADVANCED_FACE('',(#251966),#251991,.T.); +#251966 = FACE_BOUND('',#251967,.T.); +#251967 = EDGE_LOOP('',(#251968,#251969,#251977,#251985)); +#251968 = ORIENTED_EDGE('',*,*,#251947,.T.); +#251969 = ORIENTED_EDGE('',*,*,#251970,.T.); +#251970 = EDGE_CURVE('',#251940,#251971,#251973,.T.); +#251971 = VERTEX_POINT('',#251972); +#251972 = CARTESIAN_POINT('',(126.798107,-84.297433,1.545)); +#251973 = LINE('',#251974,#251975); +#251974 = CARTESIAN_POINT('',(126.85,-84.283528,1.545)); +#251975 = VECTOR('',#251976,1.); +#251976 = DIRECTION('',(-0.965924371807,-0.258824473242,0.)); +#251977 = ORIENTED_EDGE('',*,*,#251978,.F.); +#251978 = EDGE_CURVE('',#251979,#251971,#251981,.T.); +#251979 = VERTEX_POINT('',#251980); +#251980 = CARTESIAN_POINT('',(126.798107,-84.297433,1.51)); +#251981 = LINE('',#251982,#251983); +#251982 = CARTESIAN_POINT('',(126.798107,-84.297433,1.51)); +#251983 = VECTOR('',#251984,1.); +#251984 = DIRECTION('',(0.,0.,1.)); +#251985 = ORIENTED_EDGE('',*,*,#251986,.F.); +#251986 = EDGE_CURVE('',#251948,#251979,#251987,.T.); +#251987 = LINE('',#251988,#251989); +#251988 = CARTESIAN_POINT('',(126.85,-84.283528,1.51)); +#251989 = VECTOR('',#251990,1.); +#251990 = DIRECTION('',(-0.965924371807,-0.258824473242,0.)); +#251991 = PLANE('',#251992); +#251992 = AXIS2_PLACEMENT_3D('',#251993,#251994,#251995); +#251993 = CARTESIAN_POINT('',(126.85,-84.283528,1.51)); +#251994 = DIRECTION('',(0.258824473242,-0.965924371807,0.)); +#251995 = DIRECTION('',(-0.965924371807,-0.258824473242,0.)); +#251996 = ADVANCED_FACE('',(#251997),#252024,.T.); +#251997 = FACE_BOUND('',#251998,.T.); +#251998 = EDGE_LOOP('',(#251999,#252000,#252009,#252017)); +#251999 = ORIENTED_EDGE('',*,*,#251978,.T.); +#252000 = ORIENTED_EDGE('',*,*,#252001,.T.); +#252001 = EDGE_CURVE('',#251971,#252002,#252004,.T.); +#252002 = VERTEX_POINT('',#252003); +#252003 = CARTESIAN_POINT('',(127.036113,-84.114805,1.545)); +#252004 = CIRCLE('',#252005,0.300000466534); +#252005 = AXIS2_PLACEMENT_3D('',#252006,#252007,#252008); +#252006 = CARTESIAN_POINT('',(126.758949,-83.99999908976,1.545)); +#252007 = DIRECTION('',(0.,0.,-1.)); +#252008 = DIRECTION('',(0.130526463683,-0.991444825635,0.)); +#252009 = ORIENTED_EDGE('',*,*,#252010,.F.); +#252010 = EDGE_CURVE('',#252011,#252002,#252013,.T.); +#252011 = VERTEX_POINT('',#252012); +#252012 = CARTESIAN_POINT('',(127.036113,-84.114805,1.51)); +#252013 = LINE('',#252014,#252015); +#252014 = CARTESIAN_POINT('',(127.036113,-84.114805,1.51)); +#252015 = VECTOR('',#252016,1.); +#252016 = DIRECTION('',(0.,0.,1.)); +#252017 = ORIENTED_EDGE('',*,*,#252018,.F.); +#252018 = EDGE_CURVE('',#251979,#252011,#252019,.T.); +#252019 = CIRCLE('',#252020,0.300000466534); +#252020 = AXIS2_PLACEMENT_3D('',#252021,#252022,#252023); +#252021 = CARTESIAN_POINT('',(126.758949,-83.99999908976,1.51)); +#252022 = DIRECTION('',(0.,0.,-1.)); +#252023 = DIRECTION('',(0.130526463683,-0.991444825635,0.)); +#252024 = CYLINDRICAL_SURFACE('',#252025,0.300000466534); +#252025 = AXIS2_PLACEMENT_3D('',#252026,#252027,#252028); +#252026 = CARTESIAN_POINT('',(126.758949,-83.99999908976,1.51)); +#252027 = DIRECTION('',(0.,0.,-1.)); +#252028 = DIRECTION('',(0.130526463683,-0.991444825635,0.)); +#252029 = ADVANCED_FACE('',(#252030),#252046,.T.); +#252030 = FACE_BOUND('',#252031,.T.); +#252031 = EDGE_LOOP('',(#252032,#252033,#252039,#252040)); +#252032 = ORIENTED_EDGE('',*,*,#252010,.T.); +#252033 = ORIENTED_EDGE('',*,*,#252034,.T.); +#252034 = EDGE_CURVE('',#252002,#251651,#252035,.T.); +#252035 = LINE('',#252036,#252037); +#252036 = CARTESIAN_POINT('',(127.036113,-84.114805,1.545)); +#252037 = VECTOR('',#252038,1.); +#252038 = DIRECTION('',(-0.500023722852,-0.866011706957,0.)); +#252039 = ORIENTED_EDGE('',*,*,#251648,.F.); +#252040 = ORIENTED_EDGE('',*,*,#252041,.F.); +#252041 = EDGE_CURVE('',#252011,#251649,#252042,.T.); +#252042 = LINE('',#252043,#252044); +#252043 = CARTESIAN_POINT('',(127.036113,-84.114805,1.51)); +#252044 = VECTOR('',#252045,1.); +#252045 = DIRECTION('',(-0.500023722852,-0.866011706957,0.)); +#252046 = PLANE('',#252047); +#252047 = AXIS2_PLACEMENT_3D('',#252048,#252049,#252050); +#252048 = CARTESIAN_POINT('',(127.036113,-84.114805,1.51)); +#252049 = DIRECTION('',(0.866011706957,-0.500023722852,0.)); +#252050 = DIRECTION('',(-0.500023722852,-0.866011706957,0.)); +#252051 = ADVANCED_FACE('',(#252052),#252079,.F.); +#252052 = FACE_BOUND('',#252053,.T.); +#252053 = EDGE_LOOP('',(#252054,#252064,#252071,#252072)); +#252054 = ORIENTED_EDGE('',*,*,#252055,.T.); +#252055 = EDGE_CURVE('',#252056,#252058,#252060,.T.); +#252056 = VERTEX_POINT('',#252057); +#252057 = CARTESIAN_POINT('',(126.896204,-84.,1.51)); +#252058 = VERTEX_POINT('',#252059); +#252059 = CARTESIAN_POINT('',(126.896204,-84.,1.545)); +#252060 = LINE('',#252061,#252062); +#252061 = CARTESIAN_POINT('',(126.896204,-84.,1.51)); +#252062 = VECTOR('',#252063,1.); +#252063 = DIRECTION('',(0.,0.,1.)); +#252064 = ORIENTED_EDGE('',*,*,#252065,.T.); +#252065 = EDGE_CURVE('',#252058,#252058,#252066,.T.); +#252066 = CIRCLE('',#252067,0.137255); +#252067 = AXIS2_PLACEMENT_3D('',#252068,#252069,#252070); +#252068 = CARTESIAN_POINT('',(126.758949,-84.,1.545)); +#252069 = DIRECTION('',(0.,0.,1.)); +#252070 = DIRECTION('',(1.,0.,-0.)); +#252071 = ORIENTED_EDGE('',*,*,#252055,.F.); +#252072 = ORIENTED_EDGE('',*,*,#252073,.F.); +#252073 = EDGE_CURVE('',#252056,#252056,#252074,.T.); +#252074 = CIRCLE('',#252075,0.137255); +#252075 = AXIS2_PLACEMENT_3D('',#252076,#252077,#252078); +#252076 = CARTESIAN_POINT('',(126.758949,-84.,1.51)); +#252077 = DIRECTION('',(0.,0.,1.)); +#252078 = DIRECTION('',(1.,0.,-0.)); +#252079 = CYLINDRICAL_SURFACE('',#252080,0.137255); +#252080 = AXIS2_PLACEMENT_3D('',#252081,#252082,#252083); +#252081 = CARTESIAN_POINT('',(126.758949,-84.,1.51)); +#252082 = DIRECTION('',(-0.,-0.,-1.)); +#252083 = DIRECTION('',(1.,0.,-0.)); +#252084 = ADVANCED_FACE('',(#252085,#252100),#252103,.F.); +#252085 = FACE_BOUND('',#252086,.T.); +#252086 = EDGE_LOOP('',(#252087,#252088,#252089,#252090,#252091,#252092, + #252093,#252094,#252095,#252096,#252097,#252098,#252099)); +#252087 = ORIENTED_EDGE('',*,*,#251674,.T.); +#252088 = ORIENTED_EDGE('',*,*,#251705,.T.); +#252089 = ORIENTED_EDGE('',*,*,#251736,.T.); +#252090 = ORIENTED_EDGE('',*,*,#251767,.T.); +#252091 = ORIENTED_EDGE('',*,*,#251798,.T.); +#252092 = ORIENTED_EDGE('',*,*,#251830,.T.); +#252093 = ORIENTED_EDGE('',*,*,#251862,.T.); +#252094 = ORIENTED_EDGE('',*,*,#251893,.T.); +#252095 = ORIENTED_EDGE('',*,*,#251924,.T.); +#252096 = ORIENTED_EDGE('',*,*,#251955,.T.); +#252097 = ORIENTED_EDGE('',*,*,#251986,.T.); +#252098 = ORIENTED_EDGE('',*,*,#252018,.T.); +#252099 = ORIENTED_EDGE('',*,*,#252041,.T.); +#252100 = FACE_BOUND('',#252101,.T.); +#252101 = EDGE_LOOP('',(#252102)); +#252102 = ORIENTED_EDGE('',*,*,#252073,.T.); +#252103 = PLANE('',#252104); +#252104 = AXIS2_PLACEMENT_3D('',#252105,#252106,#252107); +#252105 = CARTESIAN_POINT('',(0.,0.,1.51)); +#252106 = DIRECTION('',(0.,0.,1.)); +#252107 = DIRECTION('',(1.,0.,-0.)); +#252108 = ADVANCED_FACE('',(#252109,#252124),#252127,.T.); +#252109 = FACE_BOUND('',#252110,.F.); +#252110 = EDGE_LOOP('',(#252111,#252112,#252113,#252114,#252115,#252116, + #252117,#252118,#252119,#252120,#252121,#252122,#252123)); +#252111 = ORIENTED_EDGE('',*,*,#251658,.T.); +#252112 = ORIENTED_EDGE('',*,*,#251689,.T.); +#252113 = ORIENTED_EDGE('',*,*,#251720,.T.); +#252114 = ORIENTED_EDGE('',*,*,#251751,.T.); +#252115 = ORIENTED_EDGE('',*,*,#251782,.T.); +#252116 = ORIENTED_EDGE('',*,*,#251813,.T.); +#252117 = ORIENTED_EDGE('',*,*,#251846,.T.); +#252118 = ORIENTED_EDGE('',*,*,#251877,.T.); +#252119 = ORIENTED_EDGE('',*,*,#251908,.T.); +#252120 = ORIENTED_EDGE('',*,*,#251939,.T.); +#252121 = ORIENTED_EDGE('',*,*,#251970,.T.); +#252122 = ORIENTED_EDGE('',*,*,#252001,.T.); +#252123 = ORIENTED_EDGE('',*,*,#252034,.T.); +#252124 = FACE_BOUND('',#252125,.F.); +#252125 = EDGE_LOOP('',(#252126)); +#252126 = ORIENTED_EDGE('',*,*,#252065,.T.); +#252127 = PLANE('',#252128); +#252128 = AXIS2_PLACEMENT_3D('',#252129,#252130,#252131); +#252129 = CARTESIAN_POINT('',(0.,0.,1.545)); +#252130 = DIRECTION('',(0.,0.,1.)); +#252131 = DIRECTION('',(1.,0.,-0.)); +#252132 = MANIFOLD_SOLID_BREP('',#252133); +#252133 = CLOSED_SHELL('',(#252134,#252174,#252205,#252238,#252269, + #252300,#252331,#252364,#252395,#252417,#252450,#252470)); +#252134 = ADVANCED_FACE('',(#252135),#252169,.T.); +#252135 = FACE_BOUND('',#252136,.T.); +#252136 = EDGE_LOOP('',(#252137,#252147,#252155,#252163)); +#252137 = ORIENTED_EDGE('',*,*,#252138,.T.); +#252138 = EDGE_CURVE('',#252139,#252141,#252143,.T.); +#252139 = VERTEX_POINT('',#252140); +#252140 = CARTESIAN_POINT('',(126.874443,-72.186853,1.51)); +#252141 = VERTEX_POINT('',#252142); +#252142 = CARTESIAN_POINT('',(126.874443,-72.186853,1.545)); +#252143 = LINE('',#252144,#252145); +#252144 = CARTESIAN_POINT('',(126.874443,-72.186853,1.51)); +#252145 = VECTOR('',#252146,1.); +#252146 = DIRECTION('',(0.,0.,1.)); +#252147 = ORIENTED_EDGE('',*,*,#252148,.T.); +#252148 = EDGE_CURVE('',#252141,#252149,#252151,.T.); +#252149 = VERTEX_POINT('',#252150); +#252150 = CARTESIAN_POINT('',(126.910491,-72.171921,1.545)); +#252151 = LINE('',#252152,#252153); +#252152 = CARTESIAN_POINT('',(126.874443,-72.186853,1.545)); +#252153 = VECTOR('',#252154,1.); +#252154 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#252155 = ORIENTED_EDGE('',*,*,#252156,.F.); +#252156 = EDGE_CURVE('',#252157,#252149,#252159,.T.); +#252157 = VERTEX_POINT('',#252158); +#252158 = CARTESIAN_POINT('',(126.910491,-72.171921,1.51)); +#252159 = LINE('',#252160,#252161); +#252160 = CARTESIAN_POINT('',(126.910491,-72.171921,1.51)); +#252161 = VECTOR('',#252162,1.); +#252162 = DIRECTION('',(0.,0.,1.)); +#252163 = ORIENTED_EDGE('',*,*,#252164,.F.); +#252164 = EDGE_CURVE('',#252139,#252157,#252165,.T.); +#252165 = LINE('',#252166,#252167); +#252166 = CARTESIAN_POINT('',(126.874443,-72.186853,1.51)); +#252167 = VECTOR('',#252168,1.); +#252168 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#252169 = PLANE('',#252170); +#252170 = AXIS2_PLACEMENT_3D('',#252171,#252172,#252173); +#252171 = CARTESIAN_POINT('',(126.874443,-72.186853,1.51)); +#252172 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#252173 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#252174 = ADVANCED_FACE('',(#252175),#252200,.T.); +#252175 = FACE_BOUND('',#252176,.T.); +#252176 = EDGE_LOOP('',(#252177,#252178,#252186,#252194)); +#252177 = ORIENTED_EDGE('',*,*,#252156,.T.); +#252178 = ORIENTED_EDGE('',*,*,#252179,.T.); +#252179 = EDGE_CURVE('',#252149,#252180,#252182,.T.); +#252180 = VERTEX_POINT('',#252181); +#252181 = CARTESIAN_POINT('',(129.269509,-72.171921,1.545)); +#252182 = LINE('',#252183,#252184); +#252183 = CARTESIAN_POINT('',(126.910491,-72.171921,1.545)); +#252184 = VECTOR('',#252185,1.); +#252185 = DIRECTION('',(1.,0.,0.)); +#252186 = ORIENTED_EDGE('',*,*,#252187,.F.); +#252187 = EDGE_CURVE('',#252188,#252180,#252190,.T.); +#252188 = VERTEX_POINT('',#252189); +#252189 = CARTESIAN_POINT('',(129.269509,-72.171921,1.51)); +#252190 = LINE('',#252191,#252192); +#252191 = CARTESIAN_POINT('',(129.269509,-72.171921,1.51)); +#252192 = VECTOR('',#252193,1.); +#252193 = DIRECTION('',(0.,0.,1.)); +#252194 = ORIENTED_EDGE('',*,*,#252195,.F.); +#252195 = EDGE_CURVE('',#252157,#252188,#252196,.T.); +#252196 = LINE('',#252197,#252198); +#252197 = CARTESIAN_POINT('',(126.910491,-72.171921,1.51)); +#252198 = VECTOR('',#252199,1.); +#252199 = DIRECTION('',(1.,0.,0.)); +#252200 = PLANE('',#252201); +#252201 = AXIS2_PLACEMENT_3D('',#252202,#252203,#252204); +#252202 = CARTESIAN_POINT('',(126.910491,-72.171921,1.51)); +#252203 = DIRECTION('',(0.,1.,0.)); +#252204 = DIRECTION('',(1.,0.,0.)); +#252205 = ADVANCED_FACE('',(#252206),#252233,.T.); +#252206 = FACE_BOUND('',#252207,.T.); +#252207 = EDGE_LOOP('',(#252208,#252209,#252218,#252226)); +#252208 = ORIENTED_EDGE('',*,*,#252187,.T.); +#252209 = ORIENTED_EDGE('',*,*,#252210,.T.); +#252210 = EDGE_CURVE('',#252180,#252211,#252213,.T.); +#252211 = VERTEX_POINT('',#252212); +#252212 = CARTESIAN_POINT('',(129.269509,-72.368079,1.545)); +#252213 = CIRCLE('',#252214,0.100000456609); +#252214 = AXIS2_PLACEMENT_3D('',#252215,#252216,#252217); +#252215 = CARTESIAN_POINT('',(129.25,-72.27,1.545)); +#252216 = DIRECTION('',(0.,0.,-1.)); +#252217 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#252218 = ORIENTED_EDGE('',*,*,#252219,.F.); +#252219 = EDGE_CURVE('',#252220,#252211,#252222,.T.); +#252220 = VERTEX_POINT('',#252221); +#252221 = CARTESIAN_POINT('',(129.269509,-72.368079,1.51)); +#252222 = LINE('',#252223,#252224); +#252223 = CARTESIAN_POINT('',(129.269509,-72.368079,1.51)); +#252224 = VECTOR('',#252225,1.); +#252225 = DIRECTION('',(0.,0.,1.)); +#252226 = ORIENTED_EDGE('',*,*,#252227,.F.); +#252227 = EDGE_CURVE('',#252188,#252220,#252228,.T.); +#252228 = CIRCLE('',#252229,0.100000456609); +#252229 = AXIS2_PLACEMENT_3D('',#252230,#252231,#252232); +#252230 = CARTESIAN_POINT('',(129.25,-72.27,1.51)); +#252231 = DIRECTION('',(0.,0.,-1.)); +#252232 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#252233 = CYLINDRICAL_SURFACE('',#252234,0.100000456609); +#252234 = AXIS2_PLACEMENT_3D('',#252235,#252236,#252237); +#252235 = CARTESIAN_POINT('',(129.25,-72.27,1.51)); +#252236 = DIRECTION('',(0.,0.,-1.)); +#252237 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#252238 = ADVANCED_FACE('',(#252239),#252264,.T.); +#252239 = FACE_BOUND('',#252240,.T.); +#252240 = EDGE_LOOP('',(#252241,#252242,#252250,#252258)); +#252241 = ORIENTED_EDGE('',*,*,#252219,.T.); +#252242 = ORIENTED_EDGE('',*,*,#252243,.T.); +#252243 = EDGE_CURVE('',#252211,#252244,#252246,.T.); +#252244 = VERTEX_POINT('',#252245); +#252245 = CARTESIAN_POINT('',(126.971421,-72.37,1.545)); +#252246 = LINE('',#252247,#252248); +#252247 = CARTESIAN_POINT('',(129.269509,-72.368079,1.545)); +#252248 = VECTOR('',#252249,1.); +#252249 = DIRECTION('',(-0.999999650626,-8.359119967824E-04,0.)); +#252250 = ORIENTED_EDGE('',*,*,#252251,.F.); +#252251 = EDGE_CURVE('',#252252,#252244,#252254,.T.); +#252252 = VERTEX_POINT('',#252253); +#252253 = CARTESIAN_POINT('',(126.971421,-72.37,1.51)); +#252254 = LINE('',#252255,#252256); +#252255 = CARTESIAN_POINT('',(126.971421,-72.37,1.51)); +#252256 = VECTOR('',#252257,1.); +#252257 = DIRECTION('',(0.,0.,1.)); +#252258 = ORIENTED_EDGE('',*,*,#252259,.F.); +#252259 = EDGE_CURVE('',#252220,#252252,#252260,.T.); +#252260 = LINE('',#252261,#252262); +#252261 = CARTESIAN_POINT('',(129.269509,-72.368079,1.51)); +#252262 = VECTOR('',#252263,1.); +#252263 = DIRECTION('',(-0.999999650626,-8.359119967824E-04,0.)); +#252264 = PLANE('',#252265); +#252265 = AXIS2_PLACEMENT_3D('',#252266,#252267,#252268); +#252266 = CARTESIAN_POINT('',(129.269509,-72.368079,1.51)); +#252267 = DIRECTION('',(8.359119967824E-04,-0.999999650626,0.)); +#252268 = DIRECTION('',(-0.999999650626,-8.359119967824E-04,0.)); +#252269 = ADVANCED_FACE('',(#252270),#252295,.T.); +#252270 = FACE_BOUND('',#252271,.T.); +#252271 = EDGE_LOOP('',(#252272,#252273,#252281,#252289)); +#252272 = ORIENTED_EDGE('',*,*,#252251,.T.); +#252273 = ORIENTED_EDGE('',*,*,#252274,.T.); +#252274 = EDGE_CURVE('',#252244,#252275,#252277,.T.); +#252275 = VERTEX_POINT('',#252276); +#252276 = CARTESIAN_POINT('',(125.9695,-73.371921,1.545)); +#252277 = LINE('',#252278,#252279); +#252278 = CARTESIAN_POINT('',(126.971421,-72.37,1.545)); +#252279 = VECTOR('',#252280,1.); +#252280 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#252281 = ORIENTED_EDGE('',*,*,#252282,.F.); +#252282 = EDGE_CURVE('',#252283,#252275,#252285,.T.); +#252283 = VERTEX_POINT('',#252284); +#252284 = CARTESIAN_POINT('',(125.9695,-73.371921,1.51)); +#252285 = LINE('',#252286,#252287); +#252286 = CARTESIAN_POINT('',(125.9695,-73.371921,1.51)); +#252287 = VECTOR('',#252288,1.); +#252288 = DIRECTION('',(0.,0.,1.)); +#252289 = ORIENTED_EDGE('',*,*,#252290,.F.); +#252290 = EDGE_CURVE('',#252252,#252283,#252291,.T.); +#252291 = LINE('',#252292,#252293); +#252292 = CARTESIAN_POINT('',(126.971421,-72.37,1.51)); +#252293 = VECTOR('',#252294,1.); +#252294 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#252295 = PLANE('',#252296); +#252296 = AXIS2_PLACEMENT_3D('',#252297,#252298,#252299); +#252297 = CARTESIAN_POINT('',(126.971421,-72.37,1.51)); +#252298 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#252299 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#252300 = ADVANCED_FACE('',(#252301),#252326,.T.); +#252301 = FACE_BOUND('',#252302,.T.); +#252302 = EDGE_LOOP('',(#252303,#252304,#252312,#252320)); +#252303 = ORIENTED_EDGE('',*,*,#252282,.T.); +#252304 = ORIENTED_EDGE('',*,*,#252305,.T.); +#252305 = EDGE_CURVE('',#252275,#252306,#252308,.T.); +#252306 = VERTEX_POINT('',#252307); +#252307 = CARTESIAN_POINT('',(125.977164,-73.385195,1.545)); +#252308 = LINE('',#252309,#252310); +#252309 = CARTESIAN_POINT('',(125.9695,-73.371921,1.545)); +#252310 = VECTOR('',#252311,1.); +#252311 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#252312 = ORIENTED_EDGE('',*,*,#252313,.F.); +#252313 = EDGE_CURVE('',#252314,#252306,#252316,.T.); +#252314 = VERTEX_POINT('',#252315); +#252315 = CARTESIAN_POINT('',(125.977164,-73.385195,1.51)); +#252316 = LINE('',#252317,#252318); +#252317 = CARTESIAN_POINT('',(125.977164,-73.385195,1.51)); +#252318 = VECTOR('',#252319,1.); +#252319 = DIRECTION('',(0.,0.,1.)); +#252320 = ORIENTED_EDGE('',*,*,#252321,.F.); +#252321 = EDGE_CURVE('',#252283,#252314,#252322,.T.); +#252322 = LINE('',#252323,#252324); +#252323 = CARTESIAN_POINT('',(125.9695,-73.371921,1.51)); +#252324 = VECTOR('',#252325,1.); +#252325 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#252326 = PLANE('',#252327); +#252327 = AXIS2_PLACEMENT_3D('',#252328,#252329,#252330); +#252328 = CARTESIAN_POINT('',(125.9695,-73.371921,1.51)); +#252329 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#252330 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#252331 = ADVANCED_FACE('',(#252332),#252359,.T.); +#252332 = FACE_BOUND('',#252333,.T.); +#252333 = EDGE_LOOP('',(#252334,#252335,#252344,#252352)); +#252334 = ORIENTED_EDGE('',*,*,#252313,.T.); +#252335 = ORIENTED_EDGE('',*,*,#252336,.T.); +#252336 = EDGE_CURVE('',#252306,#252337,#252339,.T.); +#252337 = VERTEX_POINT('',#252338); +#252338 = CARTESIAN_POINT('',(125.814805,-73.222836,1.545)); +#252339 = CIRCLE('',#252340,0.299999934501); +#252340 = AXIS2_PLACEMENT_3D('',#252341,#252342,#252343); +#252341 = CARTESIAN_POINT('',(125.70000014059,-73.4999998594,1.545)); +#252342 = DIRECTION('',(0.,0.,-1.)); +#252343 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#252344 = ORIENTED_EDGE('',*,*,#252345,.F.); +#252345 = EDGE_CURVE('',#252346,#252337,#252348,.T.); +#252346 = VERTEX_POINT('',#252347); +#252347 = CARTESIAN_POINT('',(125.814805,-73.222836,1.51)); +#252348 = LINE('',#252349,#252350); +#252349 = CARTESIAN_POINT('',(125.814805,-73.222836,1.51)); +#252350 = VECTOR('',#252351,1.); +#252351 = DIRECTION('',(0.,0.,1.)); +#252352 = ORIENTED_EDGE('',*,*,#252353,.F.); +#252353 = EDGE_CURVE('',#252314,#252346,#252354,.T.); +#252354 = CIRCLE('',#252355,0.299999934501); +#252355 = AXIS2_PLACEMENT_3D('',#252356,#252357,#252358); +#252356 = CARTESIAN_POINT('',(125.70000014059,-73.4999998594,1.51)); +#252357 = DIRECTION('',(0.,0.,-1.)); +#252358 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#252359 = CYLINDRICAL_SURFACE('',#252360,0.299999934501); +#252360 = AXIS2_PLACEMENT_3D('',#252361,#252362,#252363); +#252361 = CARTESIAN_POINT('',(125.70000014059,-73.4999998594,1.51)); +#252362 = DIRECTION('',(0.,0.,-1.)); +#252363 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#252364 = ADVANCED_FACE('',(#252365),#252390,.T.); +#252365 = FACE_BOUND('',#252366,.T.); +#252366 = EDGE_LOOP('',(#252367,#252368,#252376,#252384)); +#252367 = ORIENTED_EDGE('',*,*,#252345,.T.); +#252368 = ORIENTED_EDGE('',*,*,#252369,.T.); +#252369 = EDGE_CURVE('',#252337,#252370,#252372,.T.); +#252370 = VERTEX_POINT('',#252371); +#252371 = CARTESIAN_POINT('',(125.828078,-73.230499,1.545)); +#252372 = LINE('',#252373,#252374); +#252373 = CARTESIAN_POINT('',(125.814805,-73.222836,1.545)); +#252374 = VECTOR('',#252375,1.); +#252375 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#252376 = ORIENTED_EDGE('',*,*,#252377,.F.); +#252377 = EDGE_CURVE('',#252378,#252370,#252380,.T.); +#252378 = VERTEX_POINT('',#252379); +#252379 = CARTESIAN_POINT('',(125.828078,-73.230499,1.51)); +#252380 = LINE('',#252381,#252382); +#252381 = CARTESIAN_POINT('',(125.828078,-73.230499,1.51)); +#252382 = VECTOR('',#252383,1.); +#252383 = DIRECTION('',(0.,0.,1.)); +#252384 = ORIENTED_EDGE('',*,*,#252385,.F.); +#252385 = EDGE_CURVE('',#252346,#252378,#252386,.T.); +#252386 = LINE('',#252387,#252388); +#252387 = CARTESIAN_POINT('',(125.814805,-73.222836,1.51)); +#252388 = VECTOR('',#252389,1.); +#252389 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#252390 = PLANE('',#252391); +#252391 = AXIS2_PLACEMENT_3D('',#252392,#252393,#252394); +#252392 = CARTESIAN_POINT('',(125.814805,-73.222836,1.51)); +#252393 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#252394 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#252395 = ADVANCED_FACE('',(#252396),#252412,.T.); +#252396 = FACE_BOUND('',#252397,.T.); +#252397 = EDGE_LOOP('',(#252398,#252399,#252405,#252406)); +#252398 = ORIENTED_EDGE('',*,*,#252377,.T.); +#252399 = ORIENTED_EDGE('',*,*,#252400,.T.); +#252400 = EDGE_CURVE('',#252370,#252141,#252401,.T.); +#252401 = LINE('',#252402,#252403); +#252402 = CARTESIAN_POINT('',(125.828078,-73.230499,1.545)); +#252403 = VECTOR('',#252404,1.); +#252404 = DIRECTION('',(0.708026092661,0.706186272956,0.)); +#252405 = ORIENTED_EDGE('',*,*,#252138,.F.); +#252406 = ORIENTED_EDGE('',*,*,#252407,.F.); +#252407 = EDGE_CURVE('',#252378,#252139,#252408,.T.); +#252408 = LINE('',#252409,#252410); +#252409 = CARTESIAN_POINT('',(125.828078,-73.230499,1.51)); +#252410 = VECTOR('',#252411,1.); +#252411 = DIRECTION('',(0.708026092661,0.706186272956,0.)); +#252412 = PLANE('',#252413); +#252413 = AXIS2_PLACEMENT_3D('',#252414,#252415,#252416); +#252414 = CARTESIAN_POINT('',(125.828078,-73.230499,1.51)); +#252415 = DIRECTION('',(-0.706186272956,0.708026092661,0.)); +#252416 = DIRECTION('',(0.708026092661,0.706186272956,0.)); +#252417 = ADVANCED_FACE('',(#252418),#252445,.F.); +#252418 = FACE_BOUND('',#252419,.T.); +#252419 = EDGE_LOOP('',(#252420,#252430,#252437,#252438)); +#252420 = ORIENTED_EDGE('',*,*,#252421,.T.); +#252421 = EDGE_CURVE('',#252422,#252424,#252426,.T.); +#252422 = VERTEX_POINT('',#252423); +#252423 = CARTESIAN_POINT('',(125.837255,-73.5,1.51)); +#252424 = VERTEX_POINT('',#252425); +#252425 = CARTESIAN_POINT('',(125.837255,-73.5,1.545)); +#252426 = LINE('',#252427,#252428); +#252427 = CARTESIAN_POINT('',(125.837255,-73.5,1.51)); +#252428 = VECTOR('',#252429,1.); +#252429 = DIRECTION('',(0.,0.,1.)); +#252430 = ORIENTED_EDGE('',*,*,#252431,.T.); +#252431 = EDGE_CURVE('',#252424,#252424,#252432,.T.); +#252432 = CIRCLE('',#252433,0.137255); +#252433 = AXIS2_PLACEMENT_3D('',#252434,#252435,#252436); +#252434 = CARTESIAN_POINT('',(125.7,-73.5,1.545)); +#252435 = DIRECTION('',(0.,0.,1.)); +#252436 = DIRECTION('',(1.,0.,-0.)); +#252437 = ORIENTED_EDGE('',*,*,#252421,.F.); +#252438 = ORIENTED_EDGE('',*,*,#252439,.F.); +#252439 = EDGE_CURVE('',#252422,#252422,#252440,.T.); +#252440 = CIRCLE('',#252441,0.137255); +#252441 = AXIS2_PLACEMENT_3D('',#252442,#252443,#252444); +#252442 = CARTESIAN_POINT('',(125.7,-73.5,1.51)); +#252443 = DIRECTION('',(0.,0.,1.)); +#252444 = DIRECTION('',(1.,0.,-0.)); +#252445 = CYLINDRICAL_SURFACE('',#252446,0.137255); +#252446 = AXIS2_PLACEMENT_3D('',#252447,#252448,#252449); +#252447 = CARTESIAN_POINT('',(125.7,-73.5,1.51)); +#252448 = DIRECTION('',(-0.,-0.,-1.)); +#252449 = DIRECTION('',(1.,0.,-0.)); +#252450 = ADVANCED_FACE('',(#252451,#252462),#252465,.F.); +#252451 = FACE_BOUND('',#252452,.T.); +#252452 = EDGE_LOOP('',(#252453,#252454,#252455,#252456,#252457,#252458, + #252459,#252460,#252461)); +#252453 = ORIENTED_EDGE('',*,*,#252164,.T.); +#252454 = ORIENTED_EDGE('',*,*,#252195,.T.); +#252455 = ORIENTED_EDGE('',*,*,#252227,.T.); +#252456 = ORIENTED_EDGE('',*,*,#252259,.T.); +#252457 = ORIENTED_EDGE('',*,*,#252290,.T.); +#252458 = ORIENTED_EDGE('',*,*,#252321,.T.); +#252459 = ORIENTED_EDGE('',*,*,#252353,.T.); +#252460 = ORIENTED_EDGE('',*,*,#252385,.T.); +#252461 = ORIENTED_EDGE('',*,*,#252407,.T.); +#252462 = FACE_BOUND('',#252463,.T.); +#252463 = EDGE_LOOP('',(#252464)); +#252464 = ORIENTED_EDGE('',*,*,#252439,.T.); +#252465 = PLANE('',#252466); +#252466 = AXIS2_PLACEMENT_3D('',#252467,#252468,#252469); +#252467 = CARTESIAN_POINT('',(0.,0.,1.51)); +#252468 = DIRECTION('',(0.,0.,1.)); +#252469 = DIRECTION('',(1.,0.,-0.)); +#252470 = ADVANCED_FACE('',(#252471,#252482),#252485,.T.); +#252471 = FACE_BOUND('',#252472,.F.); +#252472 = EDGE_LOOP('',(#252473,#252474,#252475,#252476,#252477,#252478, + #252479,#252480,#252481)); +#252473 = ORIENTED_EDGE('',*,*,#252148,.T.); +#252474 = ORIENTED_EDGE('',*,*,#252179,.T.); +#252475 = ORIENTED_EDGE('',*,*,#252210,.T.); +#252476 = ORIENTED_EDGE('',*,*,#252243,.T.); +#252477 = ORIENTED_EDGE('',*,*,#252274,.T.); +#252478 = ORIENTED_EDGE('',*,*,#252305,.T.); +#252479 = ORIENTED_EDGE('',*,*,#252336,.T.); +#252480 = ORIENTED_EDGE('',*,*,#252369,.T.); +#252481 = ORIENTED_EDGE('',*,*,#252400,.T.); +#252482 = FACE_BOUND('',#252483,.F.); +#252483 = EDGE_LOOP('',(#252484)); +#252484 = ORIENTED_EDGE('',*,*,#252431,.T.); +#252485 = PLANE('',#252486); +#252486 = AXIS2_PLACEMENT_3D('',#252487,#252488,#252489); +#252487 = CARTESIAN_POINT('',(0.,0.,1.545)); +#252488 = DIRECTION('',(0.,0.,1.)); +#252489 = DIRECTION('',(1.,0.,-0.)); +#252490 = MANIFOLD_SOLID_BREP('',#252491); +#252491 = CLOSED_SHELL('',(#252492,#252532,#252563,#252594,#252627, + #252658,#252689,#252720,#252751,#252782,#252815,#252837,#252870, + #252903,#252928)); +#252492 = ADVANCED_FACE('',(#252493),#252527,.F.); +#252493 = FACE_BOUND('',#252494,.F.); +#252494 = EDGE_LOOP('',(#252495,#252505,#252513,#252521)); +#252495 = ORIENTED_EDGE('',*,*,#252496,.T.); +#252496 = EDGE_CURVE('',#252497,#252499,#252501,.T.); +#252497 = VERTEX_POINT('',#252498); +#252498 = CARTESIAN_POINT('',(125.8,-73.78113,0.)); +#252499 = VERTEX_POINT('',#252500); +#252500 = CARTESIAN_POINT('',(125.8,-73.78113,-3.5E-02)); +#252501 = LINE('',#252502,#252503); +#252502 = CARTESIAN_POINT('',(125.8,-73.78113,0.)); +#252503 = VECTOR('',#252504,1.); +#252504 = DIRECTION('',(0.,0.,-1.)); +#252505 = ORIENTED_EDGE('',*,*,#252506,.T.); +#252506 = EDGE_CURVE('',#252499,#252507,#252509,.T.); +#252507 = VERTEX_POINT('',#252508); +#252508 = CARTESIAN_POINT('',(125.8,-82.899629,-3.5E-02)); +#252509 = LINE('',#252510,#252511); +#252510 = CARTESIAN_POINT('',(125.8,-73.78113,-3.5E-02)); +#252511 = VECTOR('',#252512,1.); +#252512 = DIRECTION('',(0.,-1.,0.)); +#252513 = ORIENTED_EDGE('',*,*,#252514,.F.); +#252514 = EDGE_CURVE('',#252515,#252507,#252517,.T.); +#252515 = VERTEX_POINT('',#252516); +#252516 = CARTESIAN_POINT('',(125.8,-82.899629,0.)); +#252517 = LINE('',#252518,#252519); +#252518 = CARTESIAN_POINT('',(125.8,-82.899629,0.)); +#252519 = VECTOR('',#252520,1.); +#252520 = DIRECTION('',(0.,0.,-1.)); +#252521 = ORIENTED_EDGE('',*,*,#252522,.F.); +#252522 = EDGE_CURVE('',#252497,#252515,#252523,.T.); +#252523 = LINE('',#252524,#252525); +#252524 = CARTESIAN_POINT('',(125.8,-73.78113,0.)); +#252525 = VECTOR('',#252526,1.); +#252526 = DIRECTION('',(0.,-1.,0.)); +#252527 = PLANE('',#252528); +#252528 = AXIS2_PLACEMENT_3D('',#252529,#252530,#252531); +#252529 = CARTESIAN_POINT('',(125.8,-73.78113,0.)); +#252530 = DIRECTION('',(-1.,-0.,-0.)); +#252531 = DIRECTION('',(0.,-1.,0.)); +#252532 = ADVANCED_FACE('',(#252533),#252558,.F.); +#252533 = FACE_BOUND('',#252534,.F.); +#252534 = EDGE_LOOP('',(#252535,#252536,#252544,#252552)); +#252535 = ORIENTED_EDGE('',*,*,#252514,.T.); +#252536 = ORIENTED_EDGE('',*,*,#252537,.T.); +#252537 = EDGE_CURVE('',#252507,#252538,#252540,.T.); +#252538 = VERTEX_POINT('',#252539); +#252539 = CARTESIAN_POINT('',(126.63087,-83.730499,-3.5E-02)); +#252540 = LINE('',#252541,#252542); +#252541 = CARTESIAN_POINT('',(125.8,-82.899629,-3.5E-02)); +#252542 = VECTOR('',#252543,1.); +#252543 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#252544 = ORIENTED_EDGE('',*,*,#252545,.F.); +#252545 = EDGE_CURVE('',#252546,#252538,#252548,.T.); +#252546 = VERTEX_POINT('',#252547); +#252547 = CARTESIAN_POINT('',(126.63087,-83.730499,0.)); +#252548 = LINE('',#252549,#252550); +#252549 = CARTESIAN_POINT('',(126.63087,-83.730499,0.)); +#252550 = VECTOR('',#252551,1.); +#252551 = DIRECTION('',(0.,0.,-1.)); +#252552 = ORIENTED_EDGE('',*,*,#252553,.F.); +#252553 = EDGE_CURVE('',#252515,#252546,#252554,.T.); +#252554 = LINE('',#252555,#252556); +#252555 = CARTESIAN_POINT('',(125.8,-82.899629,0.)); +#252556 = VECTOR('',#252557,1.); +#252557 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#252558 = PLANE('',#252559); +#252559 = AXIS2_PLACEMENT_3D('',#252560,#252561,#252562); +#252560 = CARTESIAN_POINT('',(125.8,-82.899629,0.)); +#252561 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#252562 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#252563 = ADVANCED_FACE('',(#252564),#252589,.F.); +#252564 = FACE_BOUND('',#252565,.F.); +#252565 = EDGE_LOOP('',(#252566,#252567,#252575,#252583)); +#252566 = ORIENTED_EDGE('',*,*,#252545,.T.); +#252567 = ORIENTED_EDGE('',*,*,#252568,.T.); +#252568 = EDGE_CURVE('',#252538,#252569,#252571,.T.); +#252569 = VERTEX_POINT('',#252570); +#252570 = CARTESIAN_POINT('',(126.644144,-83.722836,-3.5E-02)); +#252571 = LINE('',#252572,#252573); +#252572 = CARTESIAN_POINT('',(126.63087,-83.730499,-3.5E-02)); +#252573 = VECTOR('',#252574,1.); +#252574 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#252575 = ORIENTED_EDGE('',*,*,#252576,.F.); +#252576 = EDGE_CURVE('',#252577,#252569,#252579,.T.); +#252577 = VERTEX_POINT('',#252578); +#252578 = CARTESIAN_POINT('',(126.644144,-83.722836,0.)); +#252579 = LINE('',#252580,#252581); +#252580 = CARTESIAN_POINT('',(126.644144,-83.722836,0.)); +#252581 = VECTOR('',#252582,1.); +#252582 = DIRECTION('',(0.,0.,-1.)); +#252583 = ORIENTED_EDGE('',*,*,#252584,.F.); +#252584 = EDGE_CURVE('',#252546,#252577,#252585,.T.); +#252585 = LINE('',#252586,#252587); +#252586 = CARTESIAN_POINT('',(126.63087,-83.730499,0.)); +#252587 = VECTOR('',#252588,1.); +#252588 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#252589 = PLANE('',#252590); +#252590 = AXIS2_PLACEMENT_3D('',#252591,#252592,#252593); +#252591 = CARTESIAN_POINT('',(126.63087,-83.730499,0.)); +#252592 = DIRECTION('',(0.499963423545,-0.866046520181,0.)); +#252593 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#252594 = ADVANCED_FACE('',(#252595),#252622,.T.); +#252595 = FACE_BOUND('',#252596,.F.); +#252596 = EDGE_LOOP('',(#252597,#252598,#252607,#252615)); +#252597 = ORIENTED_EDGE('',*,*,#252576,.T.); +#252598 = ORIENTED_EDGE('',*,*,#252599,.T.); +#252599 = EDGE_CURVE('',#252569,#252600,#252602,.T.); +#252600 = VERTEX_POINT('',#252601); +#252601 = CARTESIAN_POINT('',(126.481785,-83.885195,-3.5E-02)); +#252602 = CIRCLE('',#252603,0.299999934501); +#252603 = AXIS2_PLACEMENT_3D('',#252604,#252605,#252606); +#252604 = CARTESIAN_POINT('',(126.7589488594,-83.9999998594,-3.5E-02)); +#252605 = DIRECTION('',(-0.,0.,-1.)); +#252606 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#252607 = ORIENTED_EDGE('',*,*,#252608,.F.); +#252608 = EDGE_CURVE('',#252609,#252600,#252611,.T.); +#252609 = VERTEX_POINT('',#252610); +#252610 = CARTESIAN_POINT('',(126.481785,-83.885195,0.)); +#252611 = LINE('',#252612,#252613); +#252612 = CARTESIAN_POINT('',(126.481785,-83.885195,0.)); +#252613 = VECTOR('',#252614,1.); +#252614 = DIRECTION('',(0.,0.,-1.)); +#252615 = ORIENTED_EDGE('',*,*,#252616,.F.); +#252616 = EDGE_CURVE('',#252577,#252609,#252617,.T.); +#252617 = CIRCLE('',#252618,0.299999934501); +#252618 = AXIS2_PLACEMENT_3D('',#252619,#252620,#252621); +#252619 = CARTESIAN_POINT('',(126.7589488594,-83.9999998594,0.)); +#252620 = DIRECTION('',(-0.,0.,-1.)); +#252621 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#252622 = CYLINDRICAL_SURFACE('',#252623,0.299999934501); +#252623 = AXIS2_PLACEMENT_3D('',#252624,#252625,#252626); +#252624 = CARTESIAN_POINT('',(126.7589488594,-83.9999998594,0.)); +#252625 = DIRECTION('',(0.,-0.,1.)); +#252626 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#252627 = ADVANCED_FACE('',(#252628),#252653,.F.); +#252628 = FACE_BOUND('',#252629,.F.); +#252629 = EDGE_LOOP('',(#252630,#252631,#252639,#252647)); +#252630 = ORIENTED_EDGE('',*,*,#252608,.T.); +#252631 = ORIENTED_EDGE('',*,*,#252632,.T.); +#252632 = EDGE_CURVE('',#252600,#252633,#252635,.T.); +#252633 = VERTEX_POINT('',#252634); +#252634 = CARTESIAN_POINT('',(126.489448,-83.871921,-3.5E-02)); +#252635 = LINE('',#252636,#252637); +#252636 = CARTESIAN_POINT('',(126.481785,-83.885195,-3.5E-02)); +#252637 = VECTOR('',#252638,1.); +#252638 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#252639 = ORIENTED_EDGE('',*,*,#252640,.F.); +#252640 = EDGE_CURVE('',#252641,#252633,#252643,.T.); +#252641 = VERTEX_POINT('',#252642); +#252642 = CARTESIAN_POINT('',(126.489448,-83.871921,0.)); +#252643 = LINE('',#252644,#252645); +#252644 = CARTESIAN_POINT('',(126.489448,-83.871921,0.)); +#252645 = VECTOR('',#252646,1.); +#252646 = DIRECTION('',(0.,0.,-1.)); +#252647 = ORIENTED_EDGE('',*,*,#252648,.F.); +#252648 = EDGE_CURVE('',#252609,#252641,#252649,.T.); +#252649 = LINE('',#252650,#252651); +#252650 = CARTESIAN_POINT('',(126.481785,-83.885195,0.)); +#252651 = VECTOR('',#252652,1.); +#252652 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#252653 = PLANE('',#252654); +#252654 = AXIS2_PLACEMENT_3D('',#252655,#252656,#252657); +#252655 = CARTESIAN_POINT('',(126.481785,-83.885195,0.)); +#252656 = DIRECTION('',(0.866046520181,-0.499963423545,0.)); +#252657 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#252658 = ADVANCED_FACE('',(#252659),#252684,.F.); +#252659 = FACE_BOUND('',#252660,.F.); +#252660 = EDGE_LOOP('',(#252661,#252662,#252670,#252678)); +#252661 = ORIENTED_EDGE('',*,*,#252640,.T.); +#252662 = ORIENTED_EDGE('',*,*,#252663,.T.); +#252663 = EDGE_CURVE('',#252633,#252664,#252666,.T.); +#252664 = VERTEX_POINT('',#252665); +#252665 = CARTESIAN_POINT('',(125.616853,-82.996608,-3.5E-02)); +#252666 = LINE('',#252667,#252668); +#252667 = CARTESIAN_POINT('',(126.489448,-83.871921,-3.5E-02)); +#252668 = VECTOR('',#252669,1.); +#252669 = DIRECTION('',(-0.706006375332,0.708205477239,0.)); +#252670 = ORIENTED_EDGE('',*,*,#252671,.F.); +#252671 = EDGE_CURVE('',#252672,#252664,#252674,.T.); +#252672 = VERTEX_POINT('',#252673); +#252673 = CARTESIAN_POINT('',(125.616853,-82.996608,0.)); +#252674 = LINE('',#252675,#252676); +#252675 = CARTESIAN_POINT('',(125.616853,-82.996608,0.)); +#252676 = VECTOR('',#252677,1.); +#252677 = DIRECTION('',(0.,0.,-1.)); +#252678 = ORIENTED_EDGE('',*,*,#252679,.F.); +#252679 = EDGE_CURVE('',#252641,#252672,#252680,.T.); +#252680 = LINE('',#252681,#252682); +#252681 = CARTESIAN_POINT('',(126.489448,-83.871921,0.)); +#252682 = VECTOR('',#252683,1.); +#252683 = DIRECTION('',(-0.706006375332,0.708205477239,0.)); +#252684 = PLANE('',#252685); +#252685 = AXIS2_PLACEMENT_3D('',#252686,#252687,#252688); +#252686 = CARTESIAN_POINT('',(126.489448,-83.871921,0.)); +#252687 = DIRECTION('',(0.708205477239,0.706006375332,0.)); +#252688 = DIRECTION('',(-0.706006375332,0.708205477239,0.)); +#252689 = ADVANCED_FACE('',(#252690),#252715,.F.); +#252690 = FACE_BOUND('',#252691,.F.); +#252691 = EDGE_LOOP('',(#252692,#252693,#252701,#252709)); +#252692 = ORIENTED_EDGE('',*,*,#252671,.T.); +#252693 = ORIENTED_EDGE('',*,*,#252694,.T.); +#252694 = EDGE_CURVE('',#252664,#252695,#252697,.T.); +#252695 = VERTEX_POINT('',#252696); +#252696 = CARTESIAN_POINT('',(125.601921,-82.96056,-3.5E-02)); +#252697 = LINE('',#252698,#252699); +#252698 = CARTESIAN_POINT('',(125.616853,-82.996608,-3.5E-02)); +#252699 = VECTOR('',#252700,1.); +#252700 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#252701 = ORIENTED_EDGE('',*,*,#252702,.F.); +#252702 = EDGE_CURVE('',#252703,#252695,#252705,.T.); +#252703 = VERTEX_POINT('',#252704); +#252704 = CARTESIAN_POINT('',(125.601921,-82.96056,0.)); +#252705 = LINE('',#252706,#252707); +#252706 = CARTESIAN_POINT('',(125.601921,-82.96056,0.)); +#252707 = VECTOR('',#252708,1.); +#252708 = DIRECTION('',(0.,0.,-1.)); +#252709 = ORIENTED_EDGE('',*,*,#252710,.F.); +#252710 = EDGE_CURVE('',#252672,#252703,#252711,.T.); +#252711 = LINE('',#252712,#252713); +#252712 = CARTESIAN_POINT('',(125.616853,-82.996608,0.)); +#252713 = VECTOR('',#252714,1.); +#252714 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#252715 = PLANE('',#252716); +#252716 = AXIS2_PLACEMENT_3D('',#252717,#252718,#252719); +#252717 = CARTESIAN_POINT('',(125.616853,-82.996608,0.)); +#252718 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#252719 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#252720 = ADVANCED_FACE('',(#252721),#252746,.F.); +#252721 = FACE_BOUND('',#252722,.F.); +#252722 = EDGE_LOOP('',(#252723,#252724,#252732,#252740)); +#252723 = ORIENTED_EDGE('',*,*,#252702,.T.); +#252724 = ORIENTED_EDGE('',*,*,#252725,.T.); +#252725 = EDGE_CURVE('',#252695,#252726,#252728,.T.); +#252726 = VERTEX_POINT('',#252727); +#252727 = CARTESIAN_POINT('',(125.6,-73.78113,-3.5E-02)); +#252728 = LINE('',#252729,#252730); +#252729 = CARTESIAN_POINT('',(125.601921,-82.96056,-3.5E-02)); +#252730 = VECTOR('',#252731,1.); +#252731 = DIRECTION('',(-2.092722487066E-04,0.999999978103,0.)); +#252732 = ORIENTED_EDGE('',*,*,#252733,.F.); +#252733 = EDGE_CURVE('',#252734,#252726,#252736,.T.); +#252734 = VERTEX_POINT('',#252735); +#252735 = CARTESIAN_POINT('',(125.6,-73.78113,0.)); +#252736 = LINE('',#252737,#252738); +#252737 = CARTESIAN_POINT('',(125.6,-73.78113,0.)); +#252738 = VECTOR('',#252739,1.); +#252739 = DIRECTION('',(0.,0.,-1.)); +#252740 = ORIENTED_EDGE('',*,*,#252741,.F.); +#252741 = EDGE_CURVE('',#252703,#252734,#252742,.T.); +#252742 = LINE('',#252743,#252744); +#252743 = CARTESIAN_POINT('',(125.601921,-82.96056,0.)); +#252744 = VECTOR('',#252745,1.); +#252745 = DIRECTION('',(-2.092722487066E-04,0.999999978103,0.)); +#252746 = PLANE('',#252747); +#252747 = AXIS2_PLACEMENT_3D('',#252748,#252749,#252750); +#252748 = CARTESIAN_POINT('',(125.601921,-82.96056,0.)); +#252749 = DIRECTION('',(0.999999978103,2.092722487066E-04,0.)); +#252750 = DIRECTION('',(-2.092722487066E-04,0.999999978103,0.)); +#252751 = ADVANCED_FACE('',(#252752),#252777,.F.); +#252752 = FACE_BOUND('',#252753,.F.); +#252753 = EDGE_LOOP('',(#252754,#252755,#252763,#252771)); +#252754 = ORIENTED_EDGE('',*,*,#252733,.T.); +#252755 = ORIENTED_EDGE('',*,*,#252756,.T.); +#252756 = EDGE_CURVE('',#252726,#252757,#252759,.T.); +#252757 = VERTEX_POINT('',#252758); +#252758 = CARTESIAN_POINT('',(125.585195,-73.777164,-3.5E-02)); +#252759 = LINE('',#252760,#252761); +#252760 = CARTESIAN_POINT('',(125.6,-73.78113,-3.5E-02)); +#252761 = VECTOR('',#252762,1.); +#252762 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#252763 = ORIENTED_EDGE('',*,*,#252764,.F.); +#252764 = EDGE_CURVE('',#252765,#252757,#252767,.T.); +#252765 = VERTEX_POINT('',#252766); +#252766 = CARTESIAN_POINT('',(125.585195,-73.777164,0.)); +#252767 = LINE('',#252768,#252769); +#252768 = CARTESIAN_POINT('',(125.585195,-73.777164,0.)); +#252769 = VECTOR('',#252770,1.); +#252770 = DIRECTION('',(0.,0.,-1.)); +#252771 = ORIENTED_EDGE('',*,*,#252772,.F.); +#252772 = EDGE_CURVE('',#252734,#252765,#252773,.T.); +#252773 = LINE('',#252774,#252775); +#252774 = CARTESIAN_POINT('',(125.6,-73.78113,0.)); +#252775 = VECTOR('',#252776,1.); +#252776 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#252777 = PLANE('',#252778); +#252778 = AXIS2_PLACEMENT_3D('',#252779,#252780,#252781); +#252779 = CARTESIAN_POINT('',(125.6,-73.78113,0.)); +#252780 = DIRECTION('',(0.258758913865,0.9659419364,0.)); +#252781 = DIRECTION('',(-0.9659419364,0.258758913865,0.)); +#252782 = ADVANCED_FACE('',(#252783),#252810,.T.); +#252783 = FACE_BOUND('',#252784,.F.); +#252784 = EDGE_LOOP('',(#252785,#252786,#252795,#252803)); +#252785 = ORIENTED_EDGE('',*,*,#252764,.T.); +#252786 = ORIENTED_EDGE('',*,*,#252787,.T.); +#252787 = EDGE_CURVE('',#252757,#252788,#252790,.T.); +#252788 = VERTEX_POINT('',#252789); +#252789 = CARTESIAN_POINT('',(125.814805,-73.777164,-3.5E-02)); +#252790 = CIRCLE('',#252791,0.299999472923); +#252791 = AXIS2_PLACEMENT_3D('',#252792,#252793,#252794); +#252792 = CARTESIAN_POINT('',(125.7,-73.50000069844,-3.5E-02)); +#252793 = DIRECTION('',(0.,0.,-1.)); +#252794 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#252795 = ORIENTED_EDGE('',*,*,#252796,.F.); +#252796 = EDGE_CURVE('',#252797,#252788,#252799,.T.); +#252797 = VERTEX_POINT('',#252798); +#252798 = CARTESIAN_POINT('',(125.814805,-73.777164,0.)); +#252799 = LINE('',#252800,#252801); +#252800 = CARTESIAN_POINT('',(125.814805,-73.777164,0.)); +#252801 = VECTOR('',#252802,1.); +#252802 = DIRECTION('',(0.,0.,-1.)); +#252803 = ORIENTED_EDGE('',*,*,#252804,.F.); +#252804 = EDGE_CURVE('',#252765,#252797,#252805,.T.); +#252805 = CIRCLE('',#252806,0.299999472923); +#252806 = AXIS2_PLACEMENT_3D('',#252807,#252808,#252809); +#252807 = CARTESIAN_POINT('',(125.7,-73.50000069844,0.)); +#252808 = DIRECTION('',(0.,0.,-1.)); +#252809 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#252810 = CYLINDRICAL_SURFACE('',#252811,0.299999472923); +#252811 = AXIS2_PLACEMENT_3D('',#252812,#252813,#252814); +#252812 = CARTESIAN_POINT('',(125.7,-73.50000069844,0.)); +#252813 = DIRECTION('',(-0.,-0.,1.)); +#252814 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#252815 = ADVANCED_FACE('',(#252816),#252832,.F.); +#252816 = FACE_BOUND('',#252817,.F.); +#252817 = EDGE_LOOP('',(#252818,#252819,#252825,#252826)); +#252818 = ORIENTED_EDGE('',*,*,#252796,.T.); +#252819 = ORIENTED_EDGE('',*,*,#252820,.T.); +#252820 = EDGE_CURVE('',#252788,#252499,#252821,.T.); +#252821 = LINE('',#252822,#252823); +#252822 = CARTESIAN_POINT('',(125.814805,-73.777164,-3.5E-02)); +#252823 = VECTOR('',#252824,1.); +#252824 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#252825 = ORIENTED_EDGE('',*,*,#252496,.F.); +#252826 = ORIENTED_EDGE('',*,*,#252827,.F.); +#252827 = EDGE_CURVE('',#252797,#252497,#252828,.T.); +#252828 = LINE('',#252829,#252830); +#252829 = CARTESIAN_POINT('',(125.814805,-73.777164,0.)); +#252830 = VECTOR('',#252831,1.); +#252831 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#252832 = PLANE('',#252833); +#252833 = AXIS2_PLACEMENT_3D('',#252834,#252835,#252836); +#252834 = CARTESIAN_POINT('',(125.814805,-73.777164,0.)); +#252835 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#252836 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#252837 = ADVANCED_FACE('',(#252838),#252865,.F.); +#252838 = FACE_BOUND('',#252839,.F.); +#252839 = EDGE_LOOP('',(#252840,#252850,#252857,#252858)); +#252840 = ORIENTED_EDGE('',*,*,#252841,.T.); +#252841 = EDGE_CURVE('',#252842,#252844,#252846,.T.); +#252842 = VERTEX_POINT('',#252843); +#252843 = CARTESIAN_POINT('',(126.896204,-84.,0.)); +#252844 = VERTEX_POINT('',#252845); +#252845 = CARTESIAN_POINT('',(126.896204,-84.,-3.5E-02)); +#252846 = LINE('',#252847,#252848); +#252847 = CARTESIAN_POINT('',(126.896204,-84.,0.)); +#252848 = VECTOR('',#252849,1.); +#252849 = DIRECTION('',(0.,0.,-1.)); +#252850 = ORIENTED_EDGE('',*,*,#252851,.T.); +#252851 = EDGE_CURVE('',#252844,#252844,#252852,.T.); +#252852 = CIRCLE('',#252853,0.137255); +#252853 = AXIS2_PLACEMENT_3D('',#252854,#252855,#252856); +#252854 = CARTESIAN_POINT('',(126.758949,-84.,-3.5E-02)); +#252855 = DIRECTION('',(0.,0.,1.)); +#252856 = DIRECTION('',(1.,0.,-0.)); +#252857 = ORIENTED_EDGE('',*,*,#252841,.F.); +#252858 = ORIENTED_EDGE('',*,*,#252859,.F.); +#252859 = EDGE_CURVE('',#252842,#252842,#252860,.T.); +#252860 = CIRCLE('',#252861,0.137255); +#252861 = AXIS2_PLACEMENT_3D('',#252862,#252863,#252864); +#252862 = CARTESIAN_POINT('',(126.758949,-84.,0.)); +#252863 = DIRECTION('',(0.,0.,1.)); +#252864 = DIRECTION('',(1.,0.,-0.)); +#252865 = CYLINDRICAL_SURFACE('',#252866,0.137255); +#252866 = AXIS2_PLACEMENT_3D('',#252867,#252868,#252869); +#252867 = CARTESIAN_POINT('',(126.758949,-84.,0.)); +#252868 = DIRECTION('',(0.,0.,1.)); +#252869 = DIRECTION('',(1.,0.,-0.)); +#252870 = ADVANCED_FACE('',(#252871),#252898,.F.); +#252871 = FACE_BOUND('',#252872,.F.); +#252872 = EDGE_LOOP('',(#252873,#252883,#252890,#252891)); +#252873 = ORIENTED_EDGE('',*,*,#252874,.T.); +#252874 = EDGE_CURVE('',#252875,#252877,#252879,.T.); +#252875 = VERTEX_POINT('',#252876); +#252876 = CARTESIAN_POINT('',(125.837255,-73.5,0.)); +#252877 = VERTEX_POINT('',#252878); +#252878 = CARTESIAN_POINT('',(125.837255,-73.5,-3.5E-02)); +#252879 = LINE('',#252880,#252881); +#252880 = CARTESIAN_POINT('',(125.837255,-73.5,0.)); +#252881 = VECTOR('',#252882,1.); +#252882 = DIRECTION('',(0.,0.,-1.)); +#252883 = ORIENTED_EDGE('',*,*,#252884,.T.); +#252884 = EDGE_CURVE('',#252877,#252877,#252885,.T.); +#252885 = CIRCLE('',#252886,0.137255); +#252886 = AXIS2_PLACEMENT_3D('',#252887,#252888,#252889); +#252887 = CARTESIAN_POINT('',(125.7,-73.5,-3.5E-02)); +#252888 = DIRECTION('',(0.,0.,1.)); +#252889 = DIRECTION('',(1.,0.,-0.)); +#252890 = ORIENTED_EDGE('',*,*,#252874,.F.); +#252891 = ORIENTED_EDGE('',*,*,#252892,.F.); +#252892 = EDGE_CURVE('',#252875,#252875,#252893,.T.); +#252893 = CIRCLE('',#252894,0.137255); +#252894 = AXIS2_PLACEMENT_3D('',#252895,#252896,#252897); +#252895 = CARTESIAN_POINT('',(125.7,-73.5,0.)); +#252896 = DIRECTION('',(0.,0.,1.)); +#252897 = DIRECTION('',(1.,0.,-0.)); +#252898 = CYLINDRICAL_SURFACE('',#252899,0.137255); +#252899 = AXIS2_PLACEMENT_3D('',#252900,#252901,#252902); +#252900 = CARTESIAN_POINT('',(125.7,-73.5,0.)); +#252901 = DIRECTION('',(0.,0.,1.)); +#252902 = DIRECTION('',(1.,0.,-0.)); +#252903 = ADVANCED_FACE('',(#252904,#252917,#252920),#252923,.F.); +#252904 = FACE_BOUND('',#252905,.F.); +#252905 = EDGE_LOOP('',(#252906,#252907,#252908,#252909,#252910,#252911, + #252912,#252913,#252914,#252915,#252916)); +#252906 = ORIENTED_EDGE('',*,*,#252522,.T.); +#252907 = ORIENTED_EDGE('',*,*,#252553,.T.); +#252908 = ORIENTED_EDGE('',*,*,#252584,.T.); +#252909 = ORIENTED_EDGE('',*,*,#252616,.T.); +#252910 = ORIENTED_EDGE('',*,*,#252648,.T.); +#252911 = ORIENTED_EDGE('',*,*,#252679,.T.); +#252912 = ORIENTED_EDGE('',*,*,#252710,.T.); +#252913 = ORIENTED_EDGE('',*,*,#252741,.T.); +#252914 = ORIENTED_EDGE('',*,*,#252772,.T.); +#252915 = ORIENTED_EDGE('',*,*,#252804,.T.); +#252916 = ORIENTED_EDGE('',*,*,#252827,.T.); +#252917 = FACE_BOUND('',#252918,.F.); +#252918 = EDGE_LOOP('',(#252919)); +#252919 = ORIENTED_EDGE('',*,*,#252859,.T.); +#252920 = FACE_BOUND('',#252921,.F.); +#252921 = EDGE_LOOP('',(#252922)); +#252922 = ORIENTED_EDGE('',*,*,#252892,.T.); +#252923 = PLANE('',#252924); +#252924 = AXIS2_PLACEMENT_3D('',#252925,#252926,#252927); +#252925 = CARTESIAN_POINT('',(0.,0.,0.)); +#252926 = DIRECTION('',(-0.,-0.,-1.)); +#252927 = DIRECTION('',(-1.,0.,0.)); +#252928 = ADVANCED_FACE('',(#252929,#252942,#252945),#252948,.T.); +#252929 = FACE_BOUND('',#252930,.T.); +#252930 = EDGE_LOOP('',(#252931,#252932,#252933,#252934,#252935,#252936, + #252937,#252938,#252939,#252940,#252941)); +#252931 = ORIENTED_EDGE('',*,*,#252506,.T.); +#252932 = ORIENTED_EDGE('',*,*,#252537,.T.); +#252933 = ORIENTED_EDGE('',*,*,#252568,.T.); +#252934 = ORIENTED_EDGE('',*,*,#252599,.T.); +#252935 = ORIENTED_EDGE('',*,*,#252632,.T.); +#252936 = ORIENTED_EDGE('',*,*,#252663,.T.); +#252937 = ORIENTED_EDGE('',*,*,#252694,.T.); +#252938 = ORIENTED_EDGE('',*,*,#252725,.T.); +#252939 = ORIENTED_EDGE('',*,*,#252756,.T.); +#252940 = ORIENTED_EDGE('',*,*,#252787,.T.); +#252941 = ORIENTED_EDGE('',*,*,#252820,.T.); +#252942 = FACE_BOUND('',#252943,.T.); +#252943 = EDGE_LOOP('',(#252944)); +#252944 = ORIENTED_EDGE('',*,*,#252851,.T.); +#252945 = FACE_BOUND('',#252946,.T.); +#252946 = EDGE_LOOP('',(#252947)); +#252947 = ORIENTED_EDGE('',*,*,#252884,.T.); +#252948 = PLANE('',#252949); +#252949 = AXIS2_PLACEMENT_3D('',#252950,#252951,#252952); +#252950 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#252951 = DIRECTION('',(-0.,-0.,-1.)); +#252952 = DIRECTION('',(-1.,0.,0.)); +#252953 = MANIFOLD_SOLID_BREP('',#252954); +#252954 = CLOSED_SHELL('',(#252955,#252995,#253026,#253057,#253088, + #253119,#253150,#253181,#253214,#253236,#253269,#253289)); +#252955 = ADVANCED_FACE('',(#252956),#252990,.T.); +#252956 = FACE_BOUND('',#252957,.T.); +#252957 = EDGE_LOOP('',(#252958,#252968,#252976,#252984)); +#252958 = ORIENTED_EDGE('',*,*,#252959,.T.); +#252959 = EDGE_CURVE('',#252960,#252962,#252964,.T.); +#252960 = VERTEX_POINT('',#252961); +#252961 = CARTESIAN_POINT('',(128.1,-140.48113,1.51)); +#252962 = VERTEX_POINT('',#252963); +#252963 = CARTESIAN_POINT('',(128.1,-140.48113,1.545)); +#252964 = LINE('',#252965,#252966); +#252965 = CARTESIAN_POINT('',(128.1,-140.48113,1.51)); +#252966 = VECTOR('',#252967,1.); +#252967 = DIRECTION('',(0.,0.,1.)); +#252968 = ORIENTED_EDGE('',*,*,#252969,.T.); +#252969 = EDGE_CURVE('',#252962,#252970,#252972,.T.); +#252970 = VERTEX_POINT('',#252971); +#252971 = CARTESIAN_POINT('',(128.098175,-149.067093,1.545)); +#252972 = LINE('',#252973,#252974); +#252973 = CARTESIAN_POINT('',(128.1,-140.48113,1.545)); +#252974 = VECTOR('',#252975,1.); +#252975 = DIRECTION('',(-2.125562337934E-04,-0.99999997741,0.)); +#252976 = ORIENTED_EDGE('',*,*,#252977,.F.); +#252977 = EDGE_CURVE('',#252978,#252970,#252980,.T.); +#252978 = VERTEX_POINT('',#252979); +#252979 = CARTESIAN_POINT('',(128.098175,-149.067093,1.51)); +#252980 = LINE('',#252981,#252982); +#252981 = CARTESIAN_POINT('',(128.098175,-149.067093,1.51)); +#252982 = VECTOR('',#252983,1.); +#252983 = DIRECTION('',(0.,0.,1.)); +#252984 = ORIENTED_EDGE('',*,*,#252985,.F.); +#252985 = EDGE_CURVE('',#252960,#252978,#252986,.T.); +#252986 = LINE('',#252987,#252988); +#252987 = CARTESIAN_POINT('',(128.1,-140.48113,1.51)); +#252988 = VECTOR('',#252989,1.); +#252989 = DIRECTION('',(-2.125562337934E-04,-0.99999997741,0.)); +#252990 = PLANE('',#252991); +#252991 = AXIS2_PLACEMENT_3D('',#252992,#252993,#252994); +#252992 = CARTESIAN_POINT('',(128.1,-140.48113,1.51)); +#252993 = DIRECTION('',(0.99999997741,-2.125562337934E-04,0.)); +#252994 = DIRECTION('',(-2.125562337934E-04,-0.99999997741,0.)); +#252995 = ADVANCED_FACE('',(#252996),#253021,.T.); +#252996 = FACE_BOUND('',#252997,.T.); +#252997 = EDGE_LOOP('',(#252998,#252999,#253007,#253015)); +#252998 = ORIENTED_EDGE('',*,*,#252977,.T.); +#252999 = ORIENTED_EDGE('',*,*,#253000,.T.); +#253000 = EDGE_CURVE('',#252970,#253001,#253003,.T.); +#253001 = VERTEX_POINT('',#253002); +#253002 = CARTESIAN_POINT('',(128.057995,-149.056327,1.545)); +#253003 = LINE('',#253004,#253005); +#253004 = CARTESIAN_POINT('',(128.098175,-149.067093,1.545)); +#253005 = VECTOR('',#253006,1.); +#253006 = DIRECTION('',(-0.965927019575,0.258814591656,0.)); +#253007 = ORIENTED_EDGE('',*,*,#253008,.F.); +#253008 = EDGE_CURVE('',#253009,#253001,#253011,.T.); +#253009 = VERTEX_POINT('',#253010); +#253010 = CARTESIAN_POINT('',(128.057995,-149.056327,1.51)); +#253011 = LINE('',#253012,#253013); +#253012 = CARTESIAN_POINT('',(128.057995,-149.056327,1.51)); +#253013 = VECTOR('',#253014,1.); +#253014 = DIRECTION('',(0.,0.,1.)); +#253015 = ORIENTED_EDGE('',*,*,#253016,.F.); +#253016 = EDGE_CURVE('',#252978,#253009,#253017,.T.); +#253017 = LINE('',#253018,#253019); +#253018 = CARTESIAN_POINT('',(128.098175,-149.067093,1.51)); +#253019 = VECTOR('',#253020,1.); +#253020 = DIRECTION('',(-0.965927019575,0.258814591656,0.)); +#253021 = PLANE('',#253022); +#253022 = AXIS2_PLACEMENT_3D('',#253023,#253024,#253025); +#253023 = CARTESIAN_POINT('',(128.098175,-149.067093,1.51)); +#253024 = DIRECTION('',(-0.258814591656,-0.965927019575,0.)); +#253025 = DIRECTION('',(-0.965927019575,0.258814591656,0.)); +#253026 = ADVANCED_FACE('',(#253027),#253052,.T.); +#253027 = FACE_BOUND('',#253028,.T.); +#253028 = EDGE_LOOP('',(#253029,#253030,#253038,#253046)); +#253029 = ORIENTED_EDGE('',*,*,#253008,.T.); +#253030 = ORIENTED_EDGE('',*,*,#253031,.T.); +#253031 = EDGE_CURVE('',#253001,#253032,#253034,.T.); +#253032 = VERTEX_POINT('',#253033); +#253033 = CARTESIAN_POINT('',(128.,-149.052526,1.545)); +#253034 = LINE('',#253035,#253036); +#253035 = CARTESIAN_POINT('',(128.057995,-149.056327,1.545)); +#253036 = VECTOR('',#253037,1.); +#253037 = DIRECTION('',(-0.997859140097,6.539982052794E-02,0.)); +#253038 = ORIENTED_EDGE('',*,*,#253039,.F.); +#253039 = EDGE_CURVE('',#253040,#253032,#253042,.T.); +#253040 = VERTEX_POINT('',#253041); +#253041 = CARTESIAN_POINT('',(128.,-149.052526,1.51)); +#253042 = LINE('',#253043,#253044); +#253043 = CARTESIAN_POINT('',(128.,-149.052526,1.51)); +#253044 = VECTOR('',#253045,1.); +#253045 = DIRECTION('',(0.,0.,1.)); +#253046 = ORIENTED_EDGE('',*,*,#253047,.F.); +#253047 = EDGE_CURVE('',#253009,#253040,#253048,.T.); +#253048 = LINE('',#253049,#253050); +#253049 = CARTESIAN_POINT('',(128.057995,-149.056327,1.51)); +#253050 = VECTOR('',#253051,1.); +#253051 = DIRECTION('',(-0.997859140097,6.539982052794E-02,0.)); +#253052 = PLANE('',#253053); +#253053 = AXIS2_PLACEMENT_3D('',#253054,#253055,#253056); +#253054 = CARTESIAN_POINT('',(128.057995,-149.056327,1.51)); +#253055 = DIRECTION('',(-6.539982052794E-02,-0.997859140097,0.)); +#253056 = DIRECTION('',(-0.997859140097,6.539982052794E-02,0.)); +#253057 = ADVANCED_FACE('',(#253058),#253083,.T.); +#253058 = FACE_BOUND('',#253059,.T.); +#253059 = EDGE_LOOP('',(#253060,#253061,#253069,#253077)); +#253060 = ORIENTED_EDGE('',*,*,#253039,.T.); +#253061 = ORIENTED_EDGE('',*,*,#253062,.T.); +#253062 = EDGE_CURVE('',#253032,#253063,#253065,.T.); +#253063 = VERTEX_POINT('',#253064); +#253064 = CARTESIAN_POINT('',(127.942004,-149.056327,1.545)); +#253065 = LINE('',#253066,#253067); +#253066 = CARTESIAN_POINT('',(128.,-149.052526,1.545)); +#253067 = VECTOR('',#253068,1.); +#253068 = DIRECTION('',(-0.997859213687,-6.53986976901E-02,0.)); +#253069 = ORIENTED_EDGE('',*,*,#253070,.F.); +#253070 = EDGE_CURVE('',#253071,#253063,#253073,.T.); +#253071 = VERTEX_POINT('',#253072); +#253072 = CARTESIAN_POINT('',(127.942004,-149.056327,1.51)); +#253073 = LINE('',#253074,#253075); +#253074 = CARTESIAN_POINT('',(127.942004,-149.056327,1.51)); +#253075 = VECTOR('',#253076,1.); +#253076 = DIRECTION('',(0.,0.,1.)); +#253077 = ORIENTED_EDGE('',*,*,#253078,.F.); +#253078 = EDGE_CURVE('',#253040,#253071,#253079,.T.); +#253079 = LINE('',#253080,#253081); +#253080 = CARTESIAN_POINT('',(128.,-149.052526,1.51)); +#253081 = VECTOR('',#253082,1.); +#253082 = DIRECTION('',(-0.997859213687,-6.53986976901E-02,0.)); +#253083 = PLANE('',#253084); +#253084 = AXIS2_PLACEMENT_3D('',#253085,#253086,#253087); +#253085 = CARTESIAN_POINT('',(128.,-149.052526,1.51)); +#253086 = DIRECTION('',(6.53986976901E-02,-0.997859213687,0.)); +#253087 = DIRECTION('',(-0.997859213687,-6.53986976901E-02,0.)); +#253088 = ADVANCED_FACE('',(#253089),#253114,.T.); +#253089 = FACE_BOUND('',#253090,.T.); +#253090 = EDGE_LOOP('',(#253091,#253092,#253100,#253108)); +#253091 = ORIENTED_EDGE('',*,*,#253070,.T.); +#253092 = ORIENTED_EDGE('',*,*,#253093,.T.); +#253093 = EDGE_CURVE('',#253063,#253094,#253096,.T.); +#253094 = VERTEX_POINT('',#253095); +#253095 = CARTESIAN_POINT('',(127.901824,-149.067093,1.545)); +#253096 = LINE('',#253097,#253098); +#253097 = CARTESIAN_POINT('',(127.942004,-149.056327,1.545)); +#253098 = VECTOR('',#253099,1.); +#253099 = DIRECTION('',(-0.965927019575,-0.258814591656,0.)); +#253100 = ORIENTED_EDGE('',*,*,#253101,.F.); +#253101 = EDGE_CURVE('',#253102,#253094,#253104,.T.); +#253102 = VERTEX_POINT('',#253103); +#253103 = CARTESIAN_POINT('',(127.901824,-149.067093,1.51)); +#253104 = LINE('',#253105,#253106); +#253105 = CARTESIAN_POINT('',(127.901824,-149.067093,1.51)); +#253106 = VECTOR('',#253107,1.); +#253107 = DIRECTION('',(0.,0.,1.)); +#253108 = ORIENTED_EDGE('',*,*,#253109,.F.); +#253109 = EDGE_CURVE('',#253071,#253102,#253110,.T.); +#253110 = LINE('',#253111,#253112); +#253111 = CARTESIAN_POINT('',(127.942004,-149.056327,1.51)); +#253112 = VECTOR('',#253113,1.); +#253113 = DIRECTION('',(-0.965927019575,-0.258814591656,0.)); +#253114 = PLANE('',#253115); +#253115 = AXIS2_PLACEMENT_3D('',#253116,#253117,#253118); +#253116 = CARTESIAN_POINT('',(127.942004,-149.056327,1.51)); +#253117 = DIRECTION('',(0.258814591656,-0.965927019575,0.)); +#253118 = DIRECTION('',(-0.965927019575,-0.258814591656,0.)); +#253119 = ADVANCED_FACE('',(#253120),#253145,.T.); +#253120 = FACE_BOUND('',#253121,.T.); +#253121 = EDGE_LOOP('',(#253122,#253123,#253131,#253139)); +#253122 = ORIENTED_EDGE('',*,*,#253101,.T.); +#253123 = ORIENTED_EDGE('',*,*,#253124,.T.); +#253124 = EDGE_CURVE('',#253094,#253125,#253127,.T.); +#253125 = VERTEX_POINT('',#253126); +#253126 = CARTESIAN_POINT('',(127.9,-140.48113,1.545)); +#253127 = LINE('',#253128,#253129); +#253128 = CARTESIAN_POINT('',(127.901824,-149.067093,1.545)); +#253129 = VECTOR('',#253130,1.); +#253130 = DIRECTION('',(-2.124397646298E-04,0.999999977435,0.)); +#253131 = ORIENTED_EDGE('',*,*,#253132,.F.); +#253132 = EDGE_CURVE('',#253133,#253125,#253135,.T.); +#253133 = VERTEX_POINT('',#253134); +#253134 = CARTESIAN_POINT('',(127.9,-140.48113,1.51)); +#253135 = LINE('',#253136,#253137); +#253136 = CARTESIAN_POINT('',(127.9,-140.48113,1.51)); +#253137 = VECTOR('',#253138,1.); +#253138 = DIRECTION('',(0.,0.,1.)); +#253139 = ORIENTED_EDGE('',*,*,#253140,.F.); +#253140 = EDGE_CURVE('',#253102,#253133,#253141,.T.); +#253141 = LINE('',#253142,#253143); +#253142 = CARTESIAN_POINT('',(127.901824,-149.067093,1.51)); +#253143 = VECTOR('',#253144,1.); +#253144 = DIRECTION('',(-2.124397646298E-04,0.999999977435,0.)); +#253145 = PLANE('',#253146); +#253146 = AXIS2_PLACEMENT_3D('',#253147,#253148,#253149); +#253147 = CARTESIAN_POINT('',(127.901824,-149.067093,1.51)); +#253148 = DIRECTION('',(-0.999999977435,-2.124397646298E-04,0.)); +#253149 = DIRECTION('',(-2.124397646298E-04,0.999999977435,0.)); +#253150 = ADVANCED_FACE('',(#253151),#253176,.T.); +#253151 = FACE_BOUND('',#253152,.T.); +#253152 = EDGE_LOOP('',(#253153,#253154,#253162,#253170)); +#253153 = ORIENTED_EDGE('',*,*,#253132,.T.); +#253154 = ORIENTED_EDGE('',*,*,#253155,.T.); +#253155 = EDGE_CURVE('',#253125,#253156,#253158,.T.); +#253156 = VERTEX_POINT('',#253157); +#253157 = CARTESIAN_POINT('',(127.885195,-140.477164,1.545)); +#253158 = LINE('',#253159,#253160); +#253159 = CARTESIAN_POINT('',(127.9,-140.48113,1.545)); +#253160 = VECTOR('',#253161,1.); +#253161 = DIRECTION('',(-0.965941936399,0.258758913865,0.)); +#253162 = ORIENTED_EDGE('',*,*,#253163,.F.); +#253163 = EDGE_CURVE('',#253164,#253156,#253166,.T.); +#253164 = VERTEX_POINT('',#253165); +#253165 = CARTESIAN_POINT('',(127.885195,-140.477164,1.51)); +#253166 = LINE('',#253167,#253168); +#253167 = CARTESIAN_POINT('',(127.885195,-140.477164,1.51)); +#253168 = VECTOR('',#253169,1.); +#253169 = DIRECTION('',(0.,0.,1.)); +#253170 = ORIENTED_EDGE('',*,*,#253171,.F.); +#253171 = EDGE_CURVE('',#253133,#253164,#253172,.T.); +#253172 = LINE('',#253173,#253174); +#253173 = CARTESIAN_POINT('',(127.9,-140.48113,1.51)); +#253174 = VECTOR('',#253175,1.); +#253175 = DIRECTION('',(-0.965941936399,0.258758913865,0.)); +#253176 = PLANE('',#253177); +#253177 = AXIS2_PLACEMENT_3D('',#253178,#253179,#253180); +#253178 = CARTESIAN_POINT('',(127.9,-140.48113,1.51)); +#253179 = DIRECTION('',(-0.258758913865,-0.965941936399,0.)); +#253180 = DIRECTION('',(-0.965941936399,0.258758913865,0.)); +#253181 = ADVANCED_FACE('',(#253182),#253209,.T.); +#253182 = FACE_BOUND('',#253183,.T.); +#253183 = EDGE_LOOP('',(#253184,#253185,#253194,#253202)); +#253184 = ORIENTED_EDGE('',*,*,#253163,.T.); +#253185 = ORIENTED_EDGE('',*,*,#253186,.T.); +#253186 = EDGE_CURVE('',#253156,#253187,#253189,.T.); +#253187 = VERTEX_POINT('',#253188); +#253188 = CARTESIAN_POINT('',(128.114805,-140.477164,1.545)); +#253189 = CIRCLE('',#253190,0.299999472923); +#253190 = AXIS2_PLACEMENT_3D('',#253191,#253192,#253193); +#253191 = CARTESIAN_POINT('',(128.,-140.2000006984,1.545)); +#253192 = DIRECTION('',(0.,0.,-1.)); +#253193 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#253194 = ORIENTED_EDGE('',*,*,#253195,.F.); +#253195 = EDGE_CURVE('',#253196,#253187,#253198,.T.); +#253196 = VERTEX_POINT('',#253197); +#253197 = CARTESIAN_POINT('',(128.114805,-140.477164,1.51)); +#253198 = LINE('',#253199,#253200); +#253199 = CARTESIAN_POINT('',(128.114805,-140.477164,1.51)); +#253200 = VECTOR('',#253201,1.); +#253201 = DIRECTION('',(0.,0.,1.)); +#253202 = ORIENTED_EDGE('',*,*,#253203,.F.); +#253203 = EDGE_CURVE('',#253164,#253196,#253204,.T.); +#253204 = CIRCLE('',#253205,0.299999472923); +#253205 = AXIS2_PLACEMENT_3D('',#253206,#253207,#253208); +#253206 = CARTESIAN_POINT('',(128.,-140.2000006984,1.51)); +#253207 = DIRECTION('',(0.,0.,-1.)); +#253208 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#253209 = CYLINDRICAL_SURFACE('',#253210,0.299999472923); +#253210 = AXIS2_PLACEMENT_3D('',#253211,#253212,#253213); +#253211 = CARTESIAN_POINT('',(128.,-140.2000006984,1.51)); +#253212 = DIRECTION('',(0.,0.,-1.)); +#253213 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#253214 = ADVANCED_FACE('',(#253215),#253231,.T.); +#253215 = FACE_BOUND('',#253216,.T.); +#253216 = EDGE_LOOP('',(#253217,#253218,#253224,#253225)); +#253217 = ORIENTED_EDGE('',*,*,#253195,.T.); +#253218 = ORIENTED_EDGE('',*,*,#253219,.T.); +#253219 = EDGE_CURVE('',#253187,#252962,#253220,.T.); +#253220 = LINE('',#253221,#253222); +#253221 = CARTESIAN_POINT('',(128.114805,-140.477164,1.545)); +#253222 = VECTOR('',#253223,1.); +#253223 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#253224 = ORIENTED_EDGE('',*,*,#252959,.F.); +#253225 = ORIENTED_EDGE('',*,*,#253226,.F.); +#253226 = EDGE_CURVE('',#253196,#252960,#253227,.T.); +#253227 = LINE('',#253228,#253229); +#253228 = CARTESIAN_POINT('',(128.114805,-140.477164,1.51)); +#253229 = VECTOR('',#253230,1.); +#253230 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#253231 = PLANE('',#253232); +#253232 = AXIS2_PLACEMENT_3D('',#253233,#253234,#253235); +#253233 = CARTESIAN_POINT('',(128.114805,-140.477164,1.51)); +#253234 = DIRECTION('',(0.258758913866,-0.965941936399,0.)); +#253235 = DIRECTION('',(-0.965941936399,-0.258758913866,0.)); +#253236 = ADVANCED_FACE('',(#253237),#253264,.F.); +#253237 = FACE_BOUND('',#253238,.T.); +#253238 = EDGE_LOOP('',(#253239,#253249,#253256,#253257)); +#253239 = ORIENTED_EDGE('',*,*,#253240,.T.); +#253240 = EDGE_CURVE('',#253241,#253243,#253245,.T.); +#253241 = VERTEX_POINT('',#253242); +#253242 = CARTESIAN_POINT('',(128.137255,-140.2,1.51)); +#253243 = VERTEX_POINT('',#253244); +#253244 = CARTESIAN_POINT('',(128.137255,-140.2,1.545)); +#253245 = LINE('',#253246,#253247); +#253246 = CARTESIAN_POINT('',(128.137255,-140.2,1.51)); +#253247 = VECTOR('',#253248,1.); +#253248 = DIRECTION('',(0.,0.,1.)); +#253249 = ORIENTED_EDGE('',*,*,#253250,.T.); +#253250 = EDGE_CURVE('',#253243,#253243,#253251,.T.); +#253251 = CIRCLE('',#253252,0.137255); +#253252 = AXIS2_PLACEMENT_3D('',#253253,#253254,#253255); +#253253 = CARTESIAN_POINT('',(128.,-140.2,1.545)); +#253254 = DIRECTION('',(0.,0.,1.)); +#253255 = DIRECTION('',(1.,0.,-0.)); +#253256 = ORIENTED_EDGE('',*,*,#253240,.F.); +#253257 = ORIENTED_EDGE('',*,*,#253258,.F.); +#253258 = EDGE_CURVE('',#253241,#253241,#253259,.T.); +#253259 = CIRCLE('',#253260,0.137255); +#253260 = AXIS2_PLACEMENT_3D('',#253261,#253262,#253263); +#253261 = CARTESIAN_POINT('',(128.,-140.2,1.51)); +#253262 = DIRECTION('',(0.,0.,1.)); +#253263 = DIRECTION('',(1.,0.,-0.)); +#253264 = CYLINDRICAL_SURFACE('',#253265,0.137255); +#253265 = AXIS2_PLACEMENT_3D('',#253266,#253267,#253268); +#253266 = CARTESIAN_POINT('',(128.,-140.2,1.51)); +#253267 = DIRECTION('',(-0.,-0.,-1.)); +#253268 = DIRECTION('',(1.,0.,-0.)); +#253269 = ADVANCED_FACE('',(#253270,#253281),#253284,.F.); +#253270 = FACE_BOUND('',#253271,.T.); +#253271 = EDGE_LOOP('',(#253272,#253273,#253274,#253275,#253276,#253277, + #253278,#253279,#253280)); +#253272 = ORIENTED_EDGE('',*,*,#252985,.T.); +#253273 = ORIENTED_EDGE('',*,*,#253016,.T.); +#253274 = ORIENTED_EDGE('',*,*,#253047,.T.); +#253275 = ORIENTED_EDGE('',*,*,#253078,.T.); +#253276 = ORIENTED_EDGE('',*,*,#253109,.T.); +#253277 = ORIENTED_EDGE('',*,*,#253140,.T.); +#253278 = ORIENTED_EDGE('',*,*,#253171,.T.); +#253279 = ORIENTED_EDGE('',*,*,#253203,.T.); +#253280 = ORIENTED_EDGE('',*,*,#253226,.T.); +#253281 = FACE_BOUND('',#253282,.T.); +#253282 = EDGE_LOOP('',(#253283)); +#253283 = ORIENTED_EDGE('',*,*,#253258,.T.); +#253284 = PLANE('',#253285); +#253285 = AXIS2_PLACEMENT_3D('',#253286,#253287,#253288); +#253286 = CARTESIAN_POINT('',(0.,0.,1.51)); +#253287 = DIRECTION('',(0.,0.,1.)); +#253288 = DIRECTION('',(1.,0.,-0.)); +#253289 = ADVANCED_FACE('',(#253290,#253301),#253304,.T.); +#253290 = FACE_BOUND('',#253291,.F.); +#253291 = EDGE_LOOP('',(#253292,#253293,#253294,#253295,#253296,#253297, + #253298,#253299,#253300)); +#253292 = ORIENTED_EDGE('',*,*,#252969,.T.); +#253293 = ORIENTED_EDGE('',*,*,#253000,.T.); +#253294 = ORIENTED_EDGE('',*,*,#253031,.T.); +#253295 = ORIENTED_EDGE('',*,*,#253062,.T.); +#253296 = ORIENTED_EDGE('',*,*,#253093,.T.); +#253297 = ORIENTED_EDGE('',*,*,#253124,.T.); +#253298 = ORIENTED_EDGE('',*,*,#253155,.T.); +#253299 = ORIENTED_EDGE('',*,*,#253186,.T.); +#253300 = ORIENTED_EDGE('',*,*,#253219,.T.); +#253301 = FACE_BOUND('',#253302,.F.); +#253302 = EDGE_LOOP('',(#253303)); +#253303 = ORIENTED_EDGE('',*,*,#253250,.T.); +#253304 = PLANE('',#253305); +#253305 = AXIS2_PLACEMENT_3D('',#253306,#253307,#253308); +#253306 = CARTESIAN_POINT('',(0.,0.,1.545)); +#253307 = DIRECTION('',(0.,0.,1.)); +#253308 = DIRECTION('',(1.,0.,-0.)); +#253309 = MANIFOLD_SOLID_BREP('',#253310); +#253310 = CLOSED_SHELL('',(#253311,#253353,#253384,#253417,#253448, + #253479,#253510,#253541,#253572,#253603,#253634,#253665,#253696, + #253727,#253758,#253789,#253820,#253851,#253882,#253913,#253944, + #253975,#254006,#254039,#254070,#254101,#254132,#254163,#254194, + #254227,#254258,#254289,#254320,#254351,#254382,#254413,#254444, + #254475,#254506,#254537,#254568,#254599,#254630,#254661,#254692, + #254723,#254754,#254785,#254816,#254847,#254878,#254909,#254940, + #254971,#255002,#255033,#255064,#255097,#255128,#255159,#255190, + #255212,#255245,#255317)); +#253311 = ADVANCED_FACE('',(#253312),#253348,.T.); +#253312 = FACE_BOUND('',#253313,.T.); +#253313 = EDGE_LOOP('',(#253314,#253324,#253333,#253341)); +#253314 = ORIENTED_EDGE('',*,*,#253315,.T.); +#253315 = EDGE_CURVE('',#253316,#253318,#253320,.T.); +#253316 = VERTEX_POINT('',#253317); +#253317 = CARTESIAN_POINT('',(139.849443,-82.326853,1.51)); +#253318 = VERTEX_POINT('',#253319); +#253319 = CARTESIAN_POINT('',(139.849443,-82.326853,1.545)); +#253320 = LINE('',#253321,#253322); +#253321 = CARTESIAN_POINT('',(139.849443,-82.326853,1.51)); +#253322 = VECTOR('',#253323,1.); +#253323 = DIRECTION('',(0.,0.,1.)); +#253324 = ORIENTED_EDGE('',*,*,#253325,.T.); +#253325 = EDGE_CURVE('',#253318,#253326,#253328,.T.); +#253326 = VERTEX_POINT('',#253327); +#253327 = CARTESIAN_POINT('',(140.003079,-82.390491,1.545)); +#253328 = CIRCLE('',#253329,0.100000590676); +#253329 = AXIS2_PLACEMENT_3D('',#253330,#253331,#253332); +#253330 = CARTESIAN_POINT('',(139.905,-82.41000068719,1.545)); +#253331 = DIRECTION('',(0.,0.,-1.)); +#253332 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#253333 = ORIENTED_EDGE('',*,*,#253334,.F.); +#253334 = EDGE_CURVE('',#253335,#253326,#253337,.T.); +#253335 = VERTEX_POINT('',#253336); +#253336 = CARTESIAN_POINT('',(140.003079,-82.390491,1.51)); +#253337 = LINE('',#253338,#253339); +#253338 = CARTESIAN_POINT('',(140.003079,-82.390491,1.51)); +#253339 = VECTOR('',#253340,1.); +#253340 = DIRECTION('',(0.,0.,1.)); +#253341 = ORIENTED_EDGE('',*,*,#253342,.F.); +#253342 = EDGE_CURVE('',#253316,#253335,#253343,.T.); +#253343 = CIRCLE('',#253344,0.100000590676); +#253344 = AXIS2_PLACEMENT_3D('',#253345,#253346,#253347); +#253345 = CARTESIAN_POINT('',(139.905,-82.41000068719,1.51)); +#253346 = DIRECTION('',(0.,0.,-1.)); +#253347 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#253348 = CYLINDRICAL_SURFACE('',#253349,0.100000590676); +#253349 = AXIS2_PLACEMENT_3D('',#253350,#253351,#253352); +#253350 = CARTESIAN_POINT('',(139.905,-82.41000068719,1.51)); +#253351 = DIRECTION('',(0.,0.,-1.)); +#253352 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#253353 = ADVANCED_FACE('',(#253354),#253379,.T.); +#253354 = FACE_BOUND('',#253355,.T.); +#253355 = EDGE_LOOP('',(#253356,#253357,#253365,#253373)); +#253356 = ORIENTED_EDGE('',*,*,#253334,.T.); +#253357 = ORIENTED_EDGE('',*,*,#253358,.T.); +#253358 = EDGE_CURVE('',#253326,#253359,#253361,.T.); +#253359 = VERTEX_POINT('',#253360); +#253360 = CARTESIAN_POINT('',(140.003079,-83.479509,1.545)); +#253361 = LINE('',#253362,#253363); +#253362 = CARTESIAN_POINT('',(140.003079,-82.390491,1.545)); +#253363 = VECTOR('',#253364,1.); +#253364 = DIRECTION('',(0.,-1.,0.)); +#253365 = ORIENTED_EDGE('',*,*,#253366,.F.); +#253366 = EDGE_CURVE('',#253367,#253359,#253369,.T.); +#253367 = VERTEX_POINT('',#253368); +#253368 = CARTESIAN_POINT('',(140.003079,-83.479509,1.51)); +#253369 = LINE('',#253370,#253371); +#253370 = CARTESIAN_POINT('',(140.003079,-83.479509,1.51)); +#253371 = VECTOR('',#253372,1.); +#253372 = DIRECTION('',(0.,0.,1.)); +#253373 = ORIENTED_EDGE('',*,*,#253374,.F.); +#253374 = EDGE_CURVE('',#253335,#253367,#253375,.T.); +#253375 = LINE('',#253376,#253377); +#253376 = CARTESIAN_POINT('',(140.003079,-82.390491,1.51)); +#253377 = VECTOR('',#253378,1.); +#253378 = DIRECTION('',(0.,-1.,0.)); +#253379 = PLANE('',#253380); +#253380 = AXIS2_PLACEMENT_3D('',#253381,#253382,#253383); +#253381 = CARTESIAN_POINT('',(140.003079,-82.390491,1.51)); +#253382 = DIRECTION('',(1.,0.,-0.)); +#253383 = DIRECTION('',(0.,-1.,0.)); +#253384 = ADVANCED_FACE('',(#253385),#253412,.T.); +#253385 = FACE_BOUND('',#253386,.T.); +#253386 = EDGE_LOOP('',(#253387,#253388,#253397,#253405)); +#253387 = ORIENTED_EDGE('',*,*,#253366,.T.); +#253388 = ORIENTED_EDGE('',*,*,#253389,.T.); +#253389 = EDGE_CURVE('',#253359,#253390,#253392,.T.); +#253390 = VERTEX_POINT('',#253391); +#253391 = CARTESIAN_POINT('',(139.924509,-83.558079,1.545)); +#253392 = CIRCLE('',#253393,0.100002891901); +#253393 = AXIS2_PLACEMENT_3D('',#253394,#253395,#253396); +#253394 = CARTESIAN_POINT('',(139.90499792896,-83.45999792896,1.545)); +#253395 = DIRECTION('',(0.,0.,-1.)); +#253396 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#253397 = ORIENTED_EDGE('',*,*,#253398,.F.); +#253398 = EDGE_CURVE('',#253399,#253390,#253401,.T.); +#253399 = VERTEX_POINT('',#253400); +#253400 = CARTESIAN_POINT('',(139.924509,-83.558079,1.51)); +#253401 = LINE('',#253402,#253403); +#253402 = CARTESIAN_POINT('',(139.924509,-83.558079,1.51)); +#253403 = VECTOR('',#253404,1.); +#253404 = DIRECTION('',(0.,0.,1.)); +#253405 = ORIENTED_EDGE('',*,*,#253406,.F.); +#253406 = EDGE_CURVE('',#253367,#253399,#253407,.T.); +#253407 = CIRCLE('',#253408,0.100002891901); +#253408 = AXIS2_PLACEMENT_3D('',#253409,#253410,#253411); +#253409 = CARTESIAN_POINT('',(139.90499792896,-83.45999792896,1.51)); +#253410 = DIRECTION('',(0.,0.,-1.)); +#253411 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#253412 = CYLINDRICAL_SURFACE('',#253413,0.100002891901); +#253413 = AXIS2_PLACEMENT_3D('',#253414,#253415,#253416); +#253414 = CARTESIAN_POINT('',(139.90499792896,-83.45999792896,1.51)); +#253415 = DIRECTION('',(0.,0.,-1.)); +#253416 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#253417 = ADVANCED_FACE('',(#253418),#253443,.T.); +#253418 = FACE_BOUND('',#253419,.T.); +#253419 = EDGE_LOOP('',(#253420,#253421,#253429,#253437)); +#253420 = ORIENTED_EDGE('',*,*,#253398,.T.); +#253421 = ORIENTED_EDGE('',*,*,#253422,.T.); +#253422 = EDGE_CURVE('',#253390,#253423,#253425,.T.); +#253423 = VERTEX_POINT('',#253424); +#253424 = CARTESIAN_POINT('',(139.126946,-83.56,1.545)); +#253425 = LINE('',#253426,#253427); +#253426 = CARTESIAN_POINT('',(139.924509,-83.558079,1.545)); +#253427 = VECTOR('',#253428,1.); +#253428 = DIRECTION('',(-0.999997099367,-2.408580172198E-03,0.)); +#253429 = ORIENTED_EDGE('',*,*,#253430,.F.); +#253430 = EDGE_CURVE('',#253431,#253423,#253433,.T.); +#253431 = VERTEX_POINT('',#253432); +#253432 = CARTESIAN_POINT('',(139.126946,-83.56,1.51)); +#253433 = LINE('',#253434,#253435); +#253434 = CARTESIAN_POINT('',(139.126946,-83.56,1.51)); +#253435 = VECTOR('',#253436,1.); +#253436 = DIRECTION('',(0.,0.,1.)); +#253437 = ORIENTED_EDGE('',*,*,#253438,.F.); +#253438 = EDGE_CURVE('',#253399,#253431,#253439,.T.); +#253439 = LINE('',#253440,#253441); +#253440 = CARTESIAN_POINT('',(139.924509,-83.558079,1.51)); +#253441 = VECTOR('',#253442,1.); +#253442 = DIRECTION('',(-0.999997099367,-2.408580172198E-03,0.)); +#253443 = PLANE('',#253444); +#253444 = AXIS2_PLACEMENT_3D('',#253445,#253446,#253447); +#253445 = CARTESIAN_POINT('',(139.924509,-83.558079,1.51)); +#253446 = DIRECTION('',(2.408580172198E-03,-0.999997099367,0.)); +#253447 = DIRECTION('',(-0.999997099367,-2.408580172198E-03,0.)); +#253448 = ADVANCED_FACE('',(#253449),#253474,.T.); +#253449 = FACE_BOUND('',#253450,.T.); +#253450 = EDGE_LOOP('',(#253451,#253452,#253460,#253468)); +#253451 = ORIENTED_EDGE('',*,*,#253430,.T.); +#253452 = ORIENTED_EDGE('',*,*,#253453,.T.); +#253453 = EDGE_CURVE('',#253423,#253454,#253456,.T.); +#253454 = VERTEX_POINT('',#253455); +#253455 = CARTESIAN_POINT('',(139.118147,-83.581243,1.545)); +#253456 = LINE('',#253457,#253458); +#253457 = CARTESIAN_POINT('',(139.126946,-83.56,1.545)); +#253458 = VECTOR('',#253459,1.); +#253459 = DIRECTION('',(-0.382678283336,-0.923881665292,0.)); +#253460 = ORIENTED_EDGE('',*,*,#253461,.F.); +#253461 = EDGE_CURVE('',#253462,#253454,#253464,.T.); +#253462 = VERTEX_POINT('',#253463); +#253463 = CARTESIAN_POINT('',(139.118147,-83.581243,1.51)); +#253464 = LINE('',#253465,#253466); +#253465 = CARTESIAN_POINT('',(139.118147,-83.581243,1.51)); +#253466 = VECTOR('',#253467,1.); +#253467 = DIRECTION('',(0.,0.,1.)); +#253468 = ORIENTED_EDGE('',*,*,#253469,.F.); +#253469 = EDGE_CURVE('',#253431,#253462,#253470,.T.); +#253470 = LINE('',#253471,#253472); +#253471 = CARTESIAN_POINT('',(139.126946,-83.56,1.51)); +#253472 = VECTOR('',#253473,1.); +#253473 = DIRECTION('',(-0.382678283336,-0.923881665292,0.)); +#253474 = PLANE('',#253475); +#253475 = AXIS2_PLACEMENT_3D('',#253476,#253477,#253478); +#253476 = CARTESIAN_POINT('',(139.126946,-83.56,1.51)); +#253477 = DIRECTION('',(0.923881665292,-0.382678283336,0.)); +#253478 = DIRECTION('',(-0.382678283336,-0.923881665292,0.)); +#253479 = ADVANCED_FACE('',(#253480),#253505,.T.); +#253480 = FACE_BOUND('',#253481,.T.); +#253481 = EDGE_LOOP('',(#253482,#253483,#253491,#253499)); +#253482 = ORIENTED_EDGE('',*,*,#253461,.T.); +#253483 = ORIENTED_EDGE('',*,*,#253484,.T.); +#253484 = EDGE_CURVE('',#253454,#253485,#253487,.T.); +#253485 = VERTEX_POINT('',#253486); +#253486 = CARTESIAN_POINT('',(138.116242,-84.583147,1.545)); +#253487 = LINE('',#253488,#253489); +#253488 = CARTESIAN_POINT('',(139.118147,-83.581243,1.545)); +#253489 = VECTOR('',#253490,1.); +#253490 = DIRECTION('',(-0.707107134068,-0.707106428305,0.)); +#253491 = ORIENTED_EDGE('',*,*,#253492,.F.); +#253492 = EDGE_CURVE('',#253493,#253485,#253495,.T.); +#253493 = VERTEX_POINT('',#253494); +#253494 = CARTESIAN_POINT('',(138.116242,-84.583147,1.51)); +#253495 = LINE('',#253496,#253497); +#253496 = CARTESIAN_POINT('',(138.116242,-84.583147,1.51)); +#253497 = VECTOR('',#253498,1.); +#253498 = DIRECTION('',(0.,0.,1.)); +#253499 = ORIENTED_EDGE('',*,*,#253500,.F.); +#253500 = EDGE_CURVE('',#253462,#253493,#253501,.T.); +#253501 = LINE('',#253502,#253503); +#253502 = CARTESIAN_POINT('',(139.118147,-83.581243,1.51)); +#253503 = VECTOR('',#253504,1.); +#253504 = DIRECTION('',(-0.707107134068,-0.707106428305,0.)); +#253505 = PLANE('',#253506); +#253506 = AXIS2_PLACEMENT_3D('',#253507,#253508,#253509); +#253507 = CARTESIAN_POINT('',(139.118147,-83.581243,1.51)); +#253508 = DIRECTION('',(0.707106428305,-0.707107134068,0.)); +#253509 = DIRECTION('',(-0.707107134068,-0.707106428305,0.)); +#253510 = ADVANCED_FACE('',(#253511),#253536,.T.); +#253511 = FACE_BOUND('',#253512,.T.); +#253512 = EDGE_LOOP('',(#253513,#253514,#253522,#253530)); +#253513 = ORIENTED_EDGE('',*,*,#253492,.T.); +#253514 = ORIENTED_EDGE('',*,*,#253515,.T.); +#253515 = EDGE_CURVE('',#253485,#253516,#253518,.T.); +#253516 = VERTEX_POINT('',#253517); +#253517 = CARTESIAN_POINT('',(138.080194,-84.598079,1.545)); +#253518 = LINE('',#253519,#253520); +#253519 = CARTESIAN_POINT('',(138.116242,-84.583147,1.545)); +#253520 = VECTOR('',#253521,1.); +#253521 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253522 = ORIENTED_EDGE('',*,*,#253523,.F.); +#253523 = EDGE_CURVE('',#253524,#253516,#253526,.T.); +#253524 = VERTEX_POINT('',#253525); +#253525 = CARTESIAN_POINT('',(138.080194,-84.598079,1.51)); +#253526 = LINE('',#253527,#253528); +#253527 = CARTESIAN_POINT('',(138.080194,-84.598079,1.51)); +#253528 = VECTOR('',#253529,1.); +#253529 = DIRECTION('',(0.,0.,1.)); +#253530 = ORIENTED_EDGE('',*,*,#253531,.F.); +#253531 = EDGE_CURVE('',#253493,#253524,#253532,.T.); +#253532 = LINE('',#253533,#253534); +#253533 = CARTESIAN_POINT('',(138.116242,-84.583147,1.51)); +#253534 = VECTOR('',#253535,1.); +#253535 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253536 = PLANE('',#253537); +#253537 = AXIS2_PLACEMENT_3D('',#253538,#253539,#253540); +#253538 = CARTESIAN_POINT('',(138.116242,-84.583147,1.51)); +#253539 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#253540 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253541 = ADVANCED_FACE('',(#253542),#253567,.T.); +#253542 = FACE_BOUND('',#253543,.T.); +#253543 = EDGE_LOOP('',(#253544,#253545,#253553,#253561)); +#253544 = ORIENTED_EDGE('',*,*,#253523,.T.); +#253545 = ORIENTED_EDGE('',*,*,#253546,.T.); +#253546 = EDGE_CURVE('',#253516,#253547,#253549,.T.); +#253547 = VERTEX_POINT('',#253548); +#253548 = CARTESIAN_POINT('',(136.273477,-84.6,1.545)); +#253549 = LINE('',#253550,#253551); +#253550 = CARTESIAN_POINT('',(138.080194,-84.598079,1.545)); +#253551 = VECTOR('',#253552,1.); +#253552 = DIRECTION('',(-0.999999434745,-1.063253909794E-03,0.)); +#253553 = ORIENTED_EDGE('',*,*,#253554,.F.); +#253554 = EDGE_CURVE('',#253555,#253547,#253557,.T.); +#253555 = VERTEX_POINT('',#253556); +#253556 = CARTESIAN_POINT('',(136.273477,-84.6,1.51)); +#253557 = LINE('',#253558,#253559); +#253558 = CARTESIAN_POINT('',(136.273477,-84.6,1.51)); +#253559 = VECTOR('',#253560,1.); +#253560 = DIRECTION('',(0.,0.,1.)); +#253561 = ORIENTED_EDGE('',*,*,#253562,.F.); +#253562 = EDGE_CURVE('',#253524,#253555,#253563,.T.); +#253563 = LINE('',#253564,#253565); +#253564 = CARTESIAN_POINT('',(138.080194,-84.598079,1.51)); +#253565 = VECTOR('',#253566,1.); +#253566 = DIRECTION('',(-0.999999434745,-1.063253909794E-03,0.)); +#253567 = PLANE('',#253568); +#253568 = AXIS2_PLACEMENT_3D('',#253569,#253570,#253571); +#253569 = CARTESIAN_POINT('',(138.080194,-84.598079,1.51)); +#253570 = DIRECTION('',(1.063253909794E-03,-0.999999434745,0.)); +#253571 = DIRECTION('',(-0.999999434745,-1.063253909794E-03,0.)); +#253572 = ADVANCED_FACE('',(#253573),#253598,.T.); +#253573 = FACE_BOUND('',#253574,.T.); +#253574 = EDGE_LOOP('',(#253575,#253576,#253584,#253592)); +#253575 = ORIENTED_EDGE('',*,*,#253554,.T.); +#253576 = ORIENTED_EDGE('',*,*,#253577,.T.); +#253577 = EDGE_CURVE('',#253547,#253578,#253580,.T.); +#253578 = VERTEX_POINT('',#253579); +#253579 = CARTESIAN_POINT('',(136.127612,-84.743148,1.545)); +#253580 = LINE('',#253581,#253582); +#253581 = CARTESIAN_POINT('',(136.273477,-84.6,1.545)); +#253582 = VECTOR('',#253583,1.); +#253583 = DIRECTION('',(-0.71372272658,-0.700428347201,0.)); +#253584 = ORIENTED_EDGE('',*,*,#253585,.F.); +#253585 = EDGE_CURVE('',#253586,#253578,#253588,.T.); +#253586 = VERTEX_POINT('',#253587); +#253587 = CARTESIAN_POINT('',(136.127612,-84.743148,1.51)); +#253588 = LINE('',#253589,#253590); +#253589 = CARTESIAN_POINT('',(136.127612,-84.743148,1.51)); +#253590 = VECTOR('',#253591,1.); +#253591 = DIRECTION('',(0.,0.,1.)); +#253592 = ORIENTED_EDGE('',*,*,#253593,.F.); +#253593 = EDGE_CURVE('',#253555,#253586,#253594,.T.); +#253594 = LINE('',#253595,#253596); +#253595 = CARTESIAN_POINT('',(136.273477,-84.6,1.51)); +#253596 = VECTOR('',#253597,1.); +#253597 = DIRECTION('',(-0.71372272658,-0.700428347201,0.)); +#253598 = PLANE('',#253599); +#253599 = AXIS2_PLACEMENT_3D('',#253600,#253601,#253602); +#253600 = CARTESIAN_POINT('',(136.273477,-84.6,1.51)); +#253601 = DIRECTION('',(0.700428347201,-0.71372272658,0.)); +#253602 = DIRECTION('',(-0.71372272658,-0.700428347201,0.)); +#253603 = ADVANCED_FACE('',(#253604),#253629,.T.); +#253604 = FACE_BOUND('',#253605,.T.); +#253605 = EDGE_LOOP('',(#253606,#253607,#253615,#253623)); +#253606 = ORIENTED_EDGE('',*,*,#253585,.T.); +#253607 = ORIENTED_EDGE('',*,*,#253608,.T.); +#253608 = EDGE_CURVE('',#253578,#253609,#253611,.T.); +#253609 = VERTEX_POINT('',#253610); +#253610 = CARTESIAN_POINT('',(136.091564,-84.75808,1.545)); +#253611 = LINE('',#253612,#253613); +#253612 = CARTESIAN_POINT('',(136.127612,-84.743148,1.545)); +#253613 = VECTOR('',#253614,1.); +#253614 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253615 = ORIENTED_EDGE('',*,*,#253616,.F.); +#253616 = EDGE_CURVE('',#253617,#253609,#253619,.T.); +#253617 = VERTEX_POINT('',#253618); +#253618 = CARTESIAN_POINT('',(136.091564,-84.75808,1.51)); +#253619 = LINE('',#253620,#253621); +#253620 = CARTESIAN_POINT('',(136.091564,-84.75808,1.51)); +#253621 = VECTOR('',#253622,1.); +#253622 = DIRECTION('',(0.,0.,1.)); +#253623 = ORIENTED_EDGE('',*,*,#253624,.F.); +#253624 = EDGE_CURVE('',#253586,#253617,#253625,.T.); +#253625 = LINE('',#253626,#253627); +#253626 = CARTESIAN_POINT('',(136.127612,-84.743148,1.51)); +#253627 = VECTOR('',#253628,1.); +#253628 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253629 = PLANE('',#253630); +#253630 = AXIS2_PLACEMENT_3D('',#253631,#253632,#253633); +#253631 = CARTESIAN_POINT('',(136.127612,-84.743148,1.51)); +#253632 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#253633 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253634 = ADVANCED_FACE('',(#253635),#253660,.T.); +#253635 = FACE_BOUND('',#253636,.T.); +#253636 = EDGE_LOOP('',(#253637,#253638,#253646,#253654)); +#253637 = ORIENTED_EDGE('',*,*,#253616,.T.); +#253638 = ORIENTED_EDGE('',*,*,#253639,.T.); +#253639 = EDGE_CURVE('',#253609,#253640,#253642,.T.); +#253640 = VERTEX_POINT('',#253641); +#253641 = CARTESIAN_POINT('',(135.409161,-84.76,1.545)); +#253642 = LINE('',#253643,#253644); +#253643 = CARTESIAN_POINT('',(136.091564,-84.75808,1.545)); +#253644 = VECTOR('',#253645,1.); +#253645 = DIRECTION('',(-0.999996041888,-2.813575556415E-03,0.)); +#253646 = ORIENTED_EDGE('',*,*,#253647,.F.); +#253647 = EDGE_CURVE('',#253648,#253640,#253650,.T.); +#253648 = VERTEX_POINT('',#253649); +#253649 = CARTESIAN_POINT('',(135.409161,-84.76,1.51)); +#253650 = LINE('',#253651,#253652); +#253651 = CARTESIAN_POINT('',(135.409161,-84.76,1.51)); +#253652 = VECTOR('',#253653,1.); +#253653 = DIRECTION('',(0.,0.,1.)); +#253654 = ORIENTED_EDGE('',*,*,#253655,.F.); +#253655 = EDGE_CURVE('',#253617,#253648,#253656,.T.); +#253656 = LINE('',#253657,#253658); +#253657 = CARTESIAN_POINT('',(136.091564,-84.75808,1.51)); +#253658 = VECTOR('',#253659,1.); +#253659 = DIRECTION('',(-0.999996041888,-2.813575556415E-03,0.)); +#253660 = PLANE('',#253661); +#253661 = AXIS2_PLACEMENT_3D('',#253662,#253663,#253664); +#253662 = CARTESIAN_POINT('',(136.091564,-84.75808,1.51)); +#253663 = DIRECTION('',(2.813575556415E-03,-0.999996041888,0.)); +#253664 = DIRECTION('',(-0.999996041888,-2.813575556415E-03,0.)); +#253665 = ADVANCED_FACE('',(#253666),#253691,.T.); +#253666 = FACE_BOUND('',#253667,.T.); +#253667 = EDGE_LOOP('',(#253668,#253669,#253677,#253685)); +#253668 = ORIENTED_EDGE('',*,*,#253647,.T.); +#253669 = ORIENTED_EDGE('',*,*,#253670,.T.); +#253670 = EDGE_CURVE('',#253640,#253671,#253673,.T.); +#253671 = VERTEX_POINT('',#253672); +#253672 = CARTESIAN_POINT('',(135.023297,-85.143147,1.545)); +#253673 = LINE('',#253674,#253675); +#253674 = CARTESIAN_POINT('',(135.409161,-84.76,1.545)); +#253675 = VECTOR('',#253676,1.); +#253676 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#253677 = ORIENTED_EDGE('',*,*,#253678,.F.); +#253678 = EDGE_CURVE('',#253679,#253671,#253681,.T.); +#253679 = VERTEX_POINT('',#253680); +#253680 = CARTESIAN_POINT('',(135.023297,-85.143147,1.51)); +#253681 = LINE('',#253682,#253683); +#253682 = CARTESIAN_POINT('',(135.023297,-85.143147,1.51)); +#253683 = VECTOR('',#253684,1.); +#253684 = DIRECTION('',(0.,0.,1.)); +#253685 = ORIENTED_EDGE('',*,*,#253686,.F.); +#253686 = EDGE_CURVE('',#253648,#253679,#253687,.T.); +#253687 = LINE('',#253688,#253689); +#253688 = CARTESIAN_POINT('',(135.409161,-84.76,1.51)); +#253689 = VECTOR('',#253690,1.); +#253690 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#253691 = PLANE('',#253692); +#253692 = AXIS2_PLACEMENT_3D('',#253693,#253694,#253695); +#253693 = CARTESIAN_POINT('',(135.409161,-84.76,1.51)); +#253694 = DIRECTION('',(0.70460409784,-0.709600637899,0.)); +#253695 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#253696 = ADVANCED_FACE('',(#253697),#253722,.T.); +#253697 = FACE_BOUND('',#253698,.T.); +#253698 = EDGE_LOOP('',(#253699,#253700,#253708,#253716)); +#253699 = ORIENTED_EDGE('',*,*,#253678,.T.); +#253700 = ORIENTED_EDGE('',*,*,#253701,.T.); +#253701 = EDGE_CURVE('',#253671,#253702,#253704,.T.); +#253702 = VERTEX_POINT('',#253703); +#253703 = CARTESIAN_POINT('',(134.987249,-85.158079,1.545)); +#253704 = LINE('',#253705,#253706); +#253705 = CARTESIAN_POINT('',(135.023297,-85.143147,1.545)); +#253706 = VECTOR('',#253707,1.); +#253707 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253708 = ORIENTED_EDGE('',*,*,#253709,.F.); +#253709 = EDGE_CURVE('',#253710,#253702,#253712,.T.); +#253710 = VERTEX_POINT('',#253711); +#253711 = CARTESIAN_POINT('',(134.987249,-85.158079,1.51)); +#253712 = LINE('',#253713,#253714); +#253713 = CARTESIAN_POINT('',(134.987249,-85.158079,1.51)); +#253714 = VECTOR('',#253715,1.); +#253715 = DIRECTION('',(0.,0.,1.)); +#253716 = ORIENTED_EDGE('',*,*,#253717,.F.); +#253717 = EDGE_CURVE('',#253679,#253710,#253718,.T.); +#253718 = LINE('',#253719,#253720); +#253719 = CARTESIAN_POINT('',(135.023297,-85.143147,1.51)); +#253720 = VECTOR('',#253721,1.); +#253721 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253722 = PLANE('',#253723); +#253723 = AXIS2_PLACEMENT_3D('',#253724,#253725,#253726); +#253724 = CARTESIAN_POINT('',(135.023297,-85.143147,1.51)); +#253725 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#253726 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#253727 = ADVANCED_FACE('',(#253728),#253753,.T.); +#253728 = FACE_BOUND('',#253729,.T.); +#253729 = EDGE_LOOP('',(#253730,#253731,#253739,#253747)); +#253730 = ORIENTED_EDGE('',*,*,#253709,.T.); +#253731 = ORIENTED_EDGE('',*,*,#253732,.T.); +#253732 = EDGE_CURVE('',#253702,#253733,#253735,.T.); +#253733 = VERTEX_POINT('',#253734); +#253734 = CARTESIAN_POINT('',(134.581421,-85.16,1.545)); +#253735 = LINE('',#253736,#253737); +#253736 = CARTESIAN_POINT('',(134.987249,-85.158079,1.545)); +#253737 = VECTOR('',#253738,1.); +#253738 = DIRECTION('',(-0.999988797024,-4.733479402797E-03,0.)); +#253739 = ORIENTED_EDGE('',*,*,#253740,.F.); +#253740 = EDGE_CURVE('',#253741,#253733,#253743,.T.); +#253741 = VERTEX_POINT('',#253742); +#253742 = CARTESIAN_POINT('',(134.581421,-85.16,1.51)); +#253743 = LINE('',#253744,#253745); +#253744 = CARTESIAN_POINT('',(134.581421,-85.16,1.51)); +#253745 = VECTOR('',#253746,1.); +#253746 = DIRECTION('',(0.,0.,1.)); +#253747 = ORIENTED_EDGE('',*,*,#253748,.F.); +#253748 = EDGE_CURVE('',#253710,#253741,#253749,.T.); +#253749 = LINE('',#253750,#253751); +#253750 = CARTESIAN_POINT('',(134.987249,-85.158079,1.51)); +#253751 = VECTOR('',#253752,1.); +#253752 = DIRECTION('',(-0.999988797024,-4.733479402797E-03,0.)); +#253753 = PLANE('',#253754); +#253754 = AXIS2_PLACEMENT_3D('',#253755,#253756,#253757); +#253755 = CARTESIAN_POINT('',(134.987249,-85.158079,1.51)); +#253756 = DIRECTION('',(4.733479402797E-03,-0.999988797024,0.)); +#253757 = DIRECTION('',(-0.999988797024,-4.733479402797E-03,0.)); +#253758 = ADVANCED_FACE('',(#253759),#253784,.T.); +#253759 = FACE_BOUND('',#253760,.T.); +#253760 = EDGE_LOOP('',(#253761,#253762,#253770,#253778)); +#253761 = ORIENTED_EDGE('',*,*,#253740,.T.); +#253762 = ORIENTED_EDGE('',*,*,#253763,.T.); +#253763 = EDGE_CURVE('',#253733,#253764,#253766,.T.); +#253764 = VERTEX_POINT('',#253765); +#253765 = CARTESIAN_POINT('',(133.705,-86.036421,1.545)); +#253766 = LINE('',#253767,#253768); +#253767 = CARTESIAN_POINT('',(134.581421,-85.16,1.545)); +#253768 = VECTOR('',#253769,1.); +#253769 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#253770 = ORIENTED_EDGE('',*,*,#253771,.F.); +#253771 = EDGE_CURVE('',#253772,#253764,#253774,.T.); +#253772 = VERTEX_POINT('',#253773); +#253773 = CARTESIAN_POINT('',(133.705,-86.036421,1.51)); +#253774 = LINE('',#253775,#253776); +#253775 = CARTESIAN_POINT('',(133.705,-86.036421,1.51)); +#253776 = VECTOR('',#253777,1.); +#253777 = DIRECTION('',(0.,0.,1.)); +#253778 = ORIENTED_EDGE('',*,*,#253779,.F.); +#253779 = EDGE_CURVE('',#253741,#253772,#253780,.T.); +#253780 = LINE('',#253781,#253782); +#253781 = CARTESIAN_POINT('',(134.581421,-85.16,1.51)); +#253782 = VECTOR('',#253783,1.); +#253783 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#253784 = PLANE('',#253785); +#253785 = AXIS2_PLACEMENT_3D('',#253786,#253787,#253788); +#253786 = CARTESIAN_POINT('',(134.581421,-85.16,1.51)); +#253787 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#253788 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#253789 = ADVANCED_FACE('',(#253790),#253815,.T.); +#253790 = FACE_BOUND('',#253791,.T.); +#253791 = EDGE_LOOP('',(#253792,#253793,#253801,#253809)); +#253792 = ORIENTED_EDGE('',*,*,#253771,.T.); +#253793 = ORIENTED_EDGE('',*,*,#253794,.T.); +#253794 = EDGE_CURVE('',#253764,#253795,#253797,.T.); +#253795 = VERTEX_POINT('',#253796); +#253796 = CARTESIAN_POINT('',(133.703079,-86.114509,1.545)); +#253797 = LINE('',#253798,#253799); +#253798 = CARTESIAN_POINT('',(133.705,-86.036421,1.545)); +#253799 = VECTOR('',#253800,1.); +#253800 = DIRECTION('',(-2.45930102734E-02,-0.999697546184,0.)); +#253801 = ORIENTED_EDGE('',*,*,#253802,.F.); +#253802 = EDGE_CURVE('',#253803,#253795,#253805,.T.); +#253803 = VERTEX_POINT('',#253804); +#253804 = CARTESIAN_POINT('',(133.703079,-86.114509,1.51)); +#253805 = LINE('',#253806,#253807); +#253806 = CARTESIAN_POINT('',(133.703079,-86.114509,1.51)); +#253807 = VECTOR('',#253808,1.); +#253808 = DIRECTION('',(0.,0.,1.)); +#253809 = ORIENTED_EDGE('',*,*,#253810,.F.); +#253810 = EDGE_CURVE('',#253772,#253803,#253811,.T.); +#253811 = LINE('',#253812,#253813); +#253812 = CARTESIAN_POINT('',(133.705,-86.036421,1.51)); +#253813 = VECTOR('',#253814,1.); +#253814 = DIRECTION('',(-2.45930102734E-02,-0.999697546184,0.)); +#253815 = PLANE('',#253816); +#253816 = AXIS2_PLACEMENT_3D('',#253817,#253818,#253819); +#253817 = CARTESIAN_POINT('',(133.705,-86.036421,1.51)); +#253818 = DIRECTION('',(0.999697546184,-2.45930102734E-02,0.)); +#253819 = DIRECTION('',(-2.45930102734E-02,-0.999697546184,0.)); +#253820 = ADVANCED_FACE('',(#253821),#253846,.T.); +#253821 = FACE_BOUND('',#253822,.T.); +#253822 = EDGE_LOOP('',(#253823,#253824,#253832,#253840)); +#253823 = ORIENTED_EDGE('',*,*,#253802,.T.); +#253824 = ORIENTED_EDGE('',*,*,#253825,.T.); +#253825 = EDGE_CURVE('',#253795,#253826,#253828,.T.); +#253826 = VERTEX_POINT('',#253827); +#253827 = CARTESIAN_POINT('',(133.688147,-86.150557,1.545)); +#253828 = LINE('',#253829,#253830); +#253829 = CARTESIAN_POINT('',(133.703079,-86.114509,1.545)); +#253830 = VECTOR('',#253831,1.); +#253831 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#253832 = ORIENTED_EDGE('',*,*,#253833,.F.); +#253833 = EDGE_CURVE('',#253834,#253826,#253836,.T.); +#253834 = VERTEX_POINT('',#253835); +#253835 = CARTESIAN_POINT('',(133.688147,-86.150557,1.51)); +#253836 = LINE('',#253837,#253838); +#253837 = CARTESIAN_POINT('',(133.688147,-86.150557,1.51)); +#253838 = VECTOR('',#253839,1.); +#253839 = DIRECTION('',(0.,0.,1.)); +#253840 = ORIENTED_EDGE('',*,*,#253841,.F.); +#253841 = EDGE_CURVE('',#253803,#253834,#253842,.T.); +#253842 = LINE('',#253843,#253844); +#253843 = CARTESIAN_POINT('',(133.703079,-86.114509,1.51)); +#253844 = VECTOR('',#253845,1.); +#253845 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#253846 = PLANE('',#253847); +#253847 = AXIS2_PLACEMENT_3D('',#253848,#253849,#253850); +#253848 = CARTESIAN_POINT('',(133.703079,-86.114509,1.51)); +#253849 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#253850 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#253851 = ADVANCED_FACE('',(#253852),#253877,.T.); +#253852 = FACE_BOUND('',#253853,.T.); +#253853 = EDGE_LOOP('',(#253854,#253855,#253863,#253871)); +#253854 = ORIENTED_EDGE('',*,*,#253833,.T.); +#253855 = ORIENTED_EDGE('',*,*,#253856,.T.); +#253856 = EDGE_CURVE('',#253826,#253857,#253859,.T.); +#253857 = VERTEX_POINT('',#253858); +#253858 = CARTESIAN_POINT('',(133.4,-86.441422,1.545)); +#253859 = LINE('',#253860,#253861); +#253860 = CARTESIAN_POINT('',(133.688147,-86.150557,1.545)); +#253861 = VECTOR('',#253862,1.); +#253862 = DIRECTION('',(-0.703779724209,-0.710418256939,0.)); +#253863 = ORIENTED_EDGE('',*,*,#253864,.F.); +#253864 = EDGE_CURVE('',#253865,#253857,#253867,.T.); +#253865 = VERTEX_POINT('',#253866); +#253866 = CARTESIAN_POINT('',(133.4,-86.441422,1.51)); +#253867 = LINE('',#253868,#253869); +#253868 = CARTESIAN_POINT('',(133.4,-86.441422,1.51)); +#253869 = VECTOR('',#253870,1.); +#253870 = DIRECTION('',(0.,0.,1.)); +#253871 = ORIENTED_EDGE('',*,*,#253872,.F.); +#253872 = EDGE_CURVE('',#253834,#253865,#253873,.T.); +#253873 = LINE('',#253874,#253875); +#253874 = CARTESIAN_POINT('',(133.688147,-86.150557,1.51)); +#253875 = VECTOR('',#253876,1.); +#253876 = DIRECTION('',(-0.703779724209,-0.710418256939,0.)); +#253877 = PLANE('',#253878); +#253878 = AXIS2_PLACEMENT_3D('',#253879,#253880,#253881); +#253879 = CARTESIAN_POINT('',(133.688147,-86.150557,1.51)); +#253880 = DIRECTION('',(0.710418256939,-0.703779724209,0.)); +#253881 = DIRECTION('',(-0.703779724209,-0.710418256939,0.)); +#253882 = ADVANCED_FACE('',(#253883),#253908,.T.); +#253883 = FACE_BOUND('',#253884,.T.); +#253884 = EDGE_LOOP('',(#253885,#253886,#253894,#253902)); +#253885 = ORIENTED_EDGE('',*,*,#253864,.T.); +#253886 = ORIENTED_EDGE('',*,*,#253887,.T.); +#253887 = EDGE_CURVE('',#253857,#253888,#253890,.T.); +#253888 = VERTEX_POINT('',#253889); +#253889 = CARTESIAN_POINT('',(133.4,-86.778677,1.545)); +#253890 = LINE('',#253891,#253892); +#253891 = CARTESIAN_POINT('',(133.4,-86.441422,1.545)); +#253892 = VECTOR('',#253893,1.); +#253893 = DIRECTION('',(0.,-1.,0.)); +#253894 = ORIENTED_EDGE('',*,*,#253895,.F.); +#253895 = EDGE_CURVE('',#253896,#253888,#253898,.T.); +#253896 = VERTEX_POINT('',#253897); +#253897 = CARTESIAN_POINT('',(133.4,-86.778677,1.51)); +#253898 = LINE('',#253899,#253900); +#253899 = CARTESIAN_POINT('',(133.4,-86.778677,1.51)); +#253900 = VECTOR('',#253901,1.); +#253901 = DIRECTION('',(0.,0.,1.)); +#253902 = ORIENTED_EDGE('',*,*,#253903,.F.); +#253903 = EDGE_CURVE('',#253865,#253896,#253904,.T.); +#253904 = LINE('',#253905,#253906); +#253905 = CARTESIAN_POINT('',(133.4,-86.441422,1.51)); +#253906 = VECTOR('',#253907,1.); +#253907 = DIRECTION('',(0.,-1.,0.)); +#253908 = PLANE('',#253909); +#253909 = AXIS2_PLACEMENT_3D('',#253910,#253911,#253912); +#253910 = CARTESIAN_POINT('',(133.4,-86.441422,1.51)); +#253911 = DIRECTION('',(1.,0.,-0.)); +#253912 = DIRECTION('',(0.,-1.,0.)); +#253913 = ADVANCED_FACE('',(#253914),#253939,.T.); +#253914 = FACE_BOUND('',#253915,.T.); +#253915 = EDGE_LOOP('',(#253916,#253917,#253925,#253933)); +#253916 = ORIENTED_EDGE('',*,*,#253895,.T.); +#253917 = ORIENTED_EDGE('',*,*,#253918,.T.); +#253918 = EDGE_CURVE('',#253888,#253919,#253921,.T.); +#253919 = VERTEX_POINT('',#253920); +#253920 = CARTESIAN_POINT('',(135.121321,-88.5,1.545)); +#253921 = LINE('',#253922,#253923); +#253922 = CARTESIAN_POINT('',(133.4,-86.778677,1.545)); +#253923 = VECTOR('',#253924,1.); +#253924 = DIRECTION('',(0.707106370394,-0.707107191979,0.)); +#253925 = ORIENTED_EDGE('',*,*,#253926,.F.); +#253926 = EDGE_CURVE('',#253927,#253919,#253929,.T.); +#253927 = VERTEX_POINT('',#253928); +#253928 = CARTESIAN_POINT('',(135.121321,-88.5,1.51)); +#253929 = LINE('',#253930,#253931); +#253930 = CARTESIAN_POINT('',(135.121321,-88.5,1.51)); +#253931 = VECTOR('',#253932,1.); +#253932 = DIRECTION('',(0.,0.,1.)); +#253933 = ORIENTED_EDGE('',*,*,#253934,.F.); +#253934 = EDGE_CURVE('',#253896,#253927,#253935,.T.); +#253935 = LINE('',#253936,#253937); +#253936 = CARTESIAN_POINT('',(133.4,-86.778677,1.51)); +#253937 = VECTOR('',#253938,1.); +#253938 = DIRECTION('',(0.707106370394,-0.707107191979,0.)); +#253939 = PLANE('',#253940); +#253940 = AXIS2_PLACEMENT_3D('',#253941,#253942,#253943); +#253941 = CARTESIAN_POINT('',(133.4,-86.778677,1.51)); +#253942 = DIRECTION('',(0.707107191979,0.707106370394,-0.)); +#253943 = DIRECTION('',(0.707106370394,-0.707107191979,0.)); +#253944 = ADVANCED_FACE('',(#253945),#253970,.T.); +#253945 = FACE_BOUND('',#253946,.T.); +#253946 = EDGE_LOOP('',(#253947,#253948,#253956,#253964)); +#253947 = ORIENTED_EDGE('',*,*,#253926,.T.); +#253948 = ORIENTED_EDGE('',*,*,#253949,.T.); +#253949 = EDGE_CURVE('',#253919,#253950,#253952,.T.); +#253950 = VERTEX_POINT('',#253951); +#253951 = CARTESIAN_POINT('',(135.707107,-88.5,1.545)); +#253952 = LINE('',#253953,#253954); +#253953 = CARTESIAN_POINT('',(135.121321,-88.5,1.545)); +#253954 = VECTOR('',#253955,1.); +#253955 = DIRECTION('',(1.,0.,0.)); +#253956 = ORIENTED_EDGE('',*,*,#253957,.F.); +#253957 = EDGE_CURVE('',#253958,#253950,#253960,.T.); +#253958 = VERTEX_POINT('',#253959); +#253959 = CARTESIAN_POINT('',(135.707107,-88.5,1.51)); +#253960 = LINE('',#253961,#253962); +#253961 = CARTESIAN_POINT('',(135.707107,-88.5,1.51)); +#253962 = VECTOR('',#253963,1.); +#253963 = DIRECTION('',(0.,0.,1.)); +#253964 = ORIENTED_EDGE('',*,*,#253965,.F.); +#253965 = EDGE_CURVE('',#253927,#253958,#253966,.T.); +#253966 = LINE('',#253967,#253968); +#253967 = CARTESIAN_POINT('',(135.121321,-88.5,1.51)); +#253968 = VECTOR('',#253969,1.); +#253969 = DIRECTION('',(1.,0.,0.)); +#253970 = PLANE('',#253971); +#253971 = AXIS2_PLACEMENT_3D('',#253972,#253973,#253974); +#253972 = CARTESIAN_POINT('',(135.121321,-88.5,1.51)); +#253973 = DIRECTION('',(0.,1.,0.)); +#253974 = DIRECTION('',(1.,0.,0.)); +#253975 = ADVANCED_FACE('',(#253976),#254001,.T.); +#253976 = FACE_BOUND('',#253977,.T.); +#253977 = EDGE_LOOP('',(#253978,#253979,#253987,#253995)); +#253978 = ORIENTED_EDGE('',*,*,#253957,.T.); +#253979 = ORIENTED_EDGE('',*,*,#253980,.T.); +#253980 = EDGE_CURVE('',#253950,#253981,#253983,.T.); +#253981 = VERTEX_POINT('',#253982); +#253982 = CARTESIAN_POINT('',(136.018708,-88.191117,1.545)); +#253983 = LINE('',#253984,#253985); +#253984 = CARTESIAN_POINT('',(135.707107,-88.5,1.545)); +#253985 = VECTOR('',#253986,1.); +#253986 = DIRECTION('',(0.710197414342,0.704002580011,0.)); +#253987 = ORIENTED_EDGE('',*,*,#253988,.F.); +#253988 = EDGE_CURVE('',#253989,#253981,#253991,.T.); +#253989 = VERTEX_POINT('',#253990); +#253990 = CARTESIAN_POINT('',(136.018708,-88.191117,1.51)); +#253991 = LINE('',#253992,#253993); +#253992 = CARTESIAN_POINT('',(136.018708,-88.191117,1.51)); +#253993 = VECTOR('',#253994,1.); +#253994 = DIRECTION('',(0.,0.,1.)); +#253995 = ORIENTED_EDGE('',*,*,#253996,.F.); +#253996 = EDGE_CURVE('',#253958,#253989,#253997,.T.); +#253997 = LINE('',#253998,#253999); +#253998 = CARTESIAN_POINT('',(135.707107,-88.5,1.51)); +#253999 = VECTOR('',#254000,1.); +#254000 = DIRECTION('',(0.710197414342,0.704002580011,0.)); +#254001 = PLANE('',#254002); +#254002 = AXIS2_PLACEMENT_3D('',#254003,#254004,#254005); +#254003 = CARTESIAN_POINT('',(135.707107,-88.5,1.51)); +#254004 = DIRECTION('',(-0.704002580011,0.710197414342,0.)); +#254005 = DIRECTION('',(0.710197414342,0.704002580011,0.)); +#254006 = ADVANCED_FACE('',(#254007),#254034,.T.); +#254007 = FACE_BOUND('',#254008,.T.); +#254008 = EDGE_LOOP('',(#254009,#254010,#254019,#254027)); +#254009 = ORIENTED_EDGE('',*,*,#253988,.T.); +#254010 = ORIENTED_EDGE('',*,*,#254011,.T.); +#254011 = EDGE_CURVE('',#253981,#254012,#254014,.T.); +#254012 = VERTEX_POINT('',#254013); +#254013 = CARTESIAN_POINT('',(136.129827,-88.191122,1.545)); +#254014 = CIRCLE('',#254015,9.999986436475E-02); +#254015 = AXIS2_PLACEMENT_3D('',#254016,#254017,#254018); +#254016 = CARTESIAN_POINT('',(136.07426375873,-88.27426464304,1.545)); +#254017 = DIRECTION('',(0.,0.,-1.)); +#254018 = DIRECTION('',(-0.555558340875,0.831477558257,0.)); +#254019 = ORIENTED_EDGE('',*,*,#254020,.F.); +#254020 = EDGE_CURVE('',#254021,#254012,#254023,.T.); +#254021 = VERTEX_POINT('',#254022); +#254022 = CARTESIAN_POINT('',(136.129827,-88.191122,1.51)); +#254023 = LINE('',#254024,#254025); +#254024 = CARTESIAN_POINT('',(136.129827,-88.191122,1.51)); +#254025 = VECTOR('',#254026,1.); +#254026 = DIRECTION('',(0.,0.,1.)); +#254027 = ORIENTED_EDGE('',*,*,#254028,.F.); +#254028 = EDGE_CURVE('',#253989,#254021,#254029,.T.); +#254029 = CIRCLE('',#254030,9.999986436475E-02); +#254030 = AXIS2_PLACEMENT_3D('',#254031,#254032,#254033); +#254031 = CARTESIAN_POINT('',(136.07426375873,-88.27426464304,1.51)); +#254032 = DIRECTION('',(0.,0.,-1.)); +#254033 = DIRECTION('',(-0.555558340875,0.831477558257,0.)); +#254034 = CYLINDRICAL_SURFACE('',#254035,9.999986436475E-02); +#254035 = AXIS2_PLACEMENT_3D('',#254036,#254037,#254038); +#254036 = CARTESIAN_POINT('',(136.07426375873,-88.27426464304,1.51)); +#254037 = DIRECTION('',(0.,0.,-1.)); +#254038 = DIRECTION('',(-0.555558340875,0.831477558257,0.)); +#254039 = ADVANCED_FACE('',(#254040),#254065,.T.); +#254040 = FACE_BOUND('',#254041,.T.); +#254041 = EDGE_LOOP('',(#254042,#254043,#254051,#254059)); +#254042 = ORIENTED_EDGE('',*,*,#254020,.T.); +#254043 = ORIENTED_EDGE('',*,*,#254044,.T.); +#254044 = EDGE_CURVE('',#254012,#254045,#254047,.T.); +#254045 = VERTEX_POINT('',#254046); +#254046 = CARTESIAN_POINT('',(138.483147,-90.544443,1.545)); +#254047 = LINE('',#254048,#254049); +#254048 = CARTESIAN_POINT('',(136.129827,-88.191122,1.545)); +#254049 = VECTOR('',#254050,1.); +#254050 = DIRECTION('',(0.707106630951,-0.707106931423,0.)); +#254051 = ORIENTED_EDGE('',*,*,#254052,.F.); +#254052 = EDGE_CURVE('',#254053,#254045,#254055,.T.); +#254053 = VERTEX_POINT('',#254054); +#254054 = CARTESIAN_POINT('',(138.483147,-90.544443,1.51)); +#254055 = LINE('',#254056,#254057); +#254056 = CARTESIAN_POINT('',(138.483147,-90.544443,1.51)); +#254057 = VECTOR('',#254058,1.); +#254058 = DIRECTION('',(0.,0.,1.)); +#254059 = ORIENTED_EDGE('',*,*,#254060,.F.); +#254060 = EDGE_CURVE('',#254021,#254053,#254061,.T.); +#254061 = LINE('',#254062,#254063); +#254062 = CARTESIAN_POINT('',(136.129827,-88.191122,1.51)); +#254063 = VECTOR('',#254064,1.); +#254064 = DIRECTION('',(0.707106630951,-0.707106931423,0.)); +#254065 = PLANE('',#254066); +#254066 = AXIS2_PLACEMENT_3D('',#254067,#254068,#254069); +#254067 = CARTESIAN_POINT('',(136.129827,-88.191122,1.51)); +#254068 = DIRECTION('',(0.707106931423,0.707106630951,-0.)); +#254069 = DIRECTION('',(0.707106630951,-0.707106931423,0.)); +#254070 = ADVANCED_FACE('',(#254071),#254096,.T.); +#254071 = FACE_BOUND('',#254072,.T.); +#254072 = EDGE_LOOP('',(#254073,#254074,#254082,#254090)); +#254073 = ORIENTED_EDGE('',*,*,#254052,.T.); +#254074 = ORIENTED_EDGE('',*,*,#254075,.T.); +#254075 = EDGE_CURVE('',#254045,#254076,#254078,.T.); +#254076 = VERTEX_POINT('',#254077); +#254077 = CARTESIAN_POINT('',(138.498079,-90.580491,1.545)); +#254078 = LINE('',#254079,#254080); +#254079 = CARTESIAN_POINT('',(138.483147,-90.544443,1.545)); +#254080 = VECTOR('',#254081,1.); +#254081 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#254082 = ORIENTED_EDGE('',*,*,#254083,.F.); +#254083 = EDGE_CURVE('',#254084,#254076,#254086,.T.); +#254084 = VERTEX_POINT('',#254085); +#254085 = CARTESIAN_POINT('',(138.498079,-90.580491,1.51)); +#254086 = LINE('',#254087,#254088); +#254087 = CARTESIAN_POINT('',(138.498079,-90.580491,1.51)); +#254088 = VECTOR('',#254089,1.); +#254089 = DIRECTION('',(0.,0.,1.)); +#254090 = ORIENTED_EDGE('',*,*,#254091,.F.); +#254091 = EDGE_CURVE('',#254053,#254084,#254092,.T.); +#254092 = LINE('',#254093,#254094); +#254093 = CARTESIAN_POINT('',(138.483147,-90.544443,1.51)); +#254094 = VECTOR('',#254095,1.); +#254095 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#254096 = PLANE('',#254097); +#254097 = AXIS2_PLACEMENT_3D('',#254098,#254099,#254100); +#254098 = CARTESIAN_POINT('',(138.483147,-90.544443,1.51)); +#254099 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#254100 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#254101 = ADVANCED_FACE('',(#254102),#254127,.T.); +#254102 = FACE_BOUND('',#254103,.T.); +#254103 = EDGE_LOOP('',(#254104,#254105,#254113,#254121)); +#254104 = ORIENTED_EDGE('',*,*,#254083,.T.); +#254105 = ORIENTED_EDGE('',*,*,#254106,.T.); +#254106 = EDGE_CURVE('',#254076,#254107,#254109,.T.); +#254107 = VERTEX_POINT('',#254108); +#254108 = CARTESIAN_POINT('',(138.5,-122.422444,1.545)); +#254109 = LINE('',#254110,#254111); +#254110 = CARTESIAN_POINT('',(138.498079,-90.580491,1.545)); +#254111 = VECTOR('',#254112,1.); +#254112 = DIRECTION('',(6.03292139937E-05,-0.99999999818,0.)); +#254113 = ORIENTED_EDGE('',*,*,#254114,.F.); +#254114 = EDGE_CURVE('',#254115,#254107,#254117,.T.); +#254115 = VERTEX_POINT('',#254116); +#254116 = CARTESIAN_POINT('',(138.5,-122.422444,1.51)); +#254117 = LINE('',#254118,#254119); +#254118 = CARTESIAN_POINT('',(138.5,-122.422444,1.51)); +#254119 = VECTOR('',#254120,1.); +#254120 = DIRECTION('',(0.,0.,1.)); +#254121 = ORIENTED_EDGE('',*,*,#254122,.F.); +#254122 = EDGE_CURVE('',#254084,#254115,#254123,.T.); +#254123 = LINE('',#254124,#254125); +#254124 = CARTESIAN_POINT('',(138.498079,-90.580491,1.51)); +#254125 = VECTOR('',#254126,1.); +#254126 = DIRECTION('',(6.03292139937E-05,-0.99999999818,0.)); +#254127 = PLANE('',#254128); +#254128 = AXIS2_PLACEMENT_3D('',#254129,#254130,#254131); +#254129 = CARTESIAN_POINT('',(138.498079,-90.580491,1.51)); +#254130 = DIRECTION('',(0.99999999818,6.03292139937E-05,-0.)); +#254131 = DIRECTION('',(6.03292139937E-05,-0.99999999818,0.)); +#254132 = ADVANCED_FACE('',(#254133),#254158,.T.); +#254133 = FACE_BOUND('',#254134,.T.); +#254134 = EDGE_LOOP('',(#254135,#254136,#254144,#254152)); +#254135 = ORIENTED_EDGE('',*,*,#254114,.T.); +#254136 = ORIENTED_EDGE('',*,*,#254137,.T.); +#254137 = EDGE_CURVE('',#254107,#254138,#254140,.T.); +#254138 = VERTEX_POINT('',#254139); +#254139 = CARTESIAN_POINT('',(139.539987,-123.462432,1.545)); +#254140 = LINE('',#254141,#254142); +#254141 = CARTESIAN_POINT('',(138.5,-122.422444,1.545)); +#254142 = VECTOR('',#254143,1.); +#254143 = DIRECTION('',(0.707106441227,-0.707107121146,0.)); +#254144 = ORIENTED_EDGE('',*,*,#254145,.F.); +#254145 = EDGE_CURVE('',#254146,#254138,#254148,.T.); +#254146 = VERTEX_POINT('',#254147); +#254147 = CARTESIAN_POINT('',(139.539987,-123.462432,1.51)); +#254148 = LINE('',#254149,#254150); +#254149 = CARTESIAN_POINT('',(139.539987,-123.462432,1.51)); +#254150 = VECTOR('',#254151,1.); +#254151 = DIRECTION('',(0.,0.,1.)); +#254152 = ORIENTED_EDGE('',*,*,#254153,.F.); +#254153 = EDGE_CURVE('',#254115,#254146,#254154,.T.); +#254154 = LINE('',#254155,#254156); +#254155 = CARTESIAN_POINT('',(138.5,-122.422444,1.51)); +#254156 = VECTOR('',#254157,1.); +#254157 = DIRECTION('',(0.707106441227,-0.707107121146,0.)); +#254158 = PLANE('',#254159); +#254159 = AXIS2_PLACEMENT_3D('',#254160,#254161,#254162); +#254160 = CARTESIAN_POINT('',(138.5,-122.422444,1.51)); +#254161 = DIRECTION('',(0.707107121146,0.707106441227,-0.)); +#254162 = DIRECTION('',(0.707106441227,-0.707107121146,0.)); +#254163 = ADVANCED_FACE('',(#254164),#254189,.T.); +#254164 = FACE_BOUND('',#254165,.T.); +#254165 = EDGE_LOOP('',(#254166,#254167,#254175,#254183)); +#254166 = ORIENTED_EDGE('',*,*,#254145,.T.); +#254167 = ORIENTED_EDGE('',*,*,#254168,.T.); +#254168 = EDGE_CURVE('',#254138,#254169,#254171,.T.); +#254169 = VERTEX_POINT('',#254170); +#254170 = CARTESIAN_POINT('',(139.553262,-123.454769,1.545)); +#254171 = LINE('',#254172,#254173); +#254172 = CARTESIAN_POINT('',(139.539987,-123.462432,1.545)); +#254173 = VECTOR('',#254174,1.); +#254174 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#254175 = ORIENTED_EDGE('',*,*,#254176,.F.); +#254176 = EDGE_CURVE('',#254177,#254169,#254179,.T.); +#254177 = VERTEX_POINT('',#254178); +#254178 = CARTESIAN_POINT('',(139.553262,-123.454769,1.51)); +#254179 = LINE('',#254180,#254181); +#254180 = CARTESIAN_POINT('',(139.553262,-123.454769,1.51)); +#254181 = VECTOR('',#254182,1.); +#254182 = DIRECTION('',(0.,0.,1.)); +#254183 = ORIENTED_EDGE('',*,*,#254184,.F.); +#254184 = EDGE_CURVE('',#254146,#254177,#254185,.T.); +#254185 = LINE('',#254186,#254187); +#254186 = CARTESIAN_POINT('',(139.539987,-123.462432,1.51)); +#254187 = VECTOR('',#254188,1.); +#254188 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#254189 = PLANE('',#254190); +#254190 = AXIS2_PLACEMENT_3D('',#254191,#254192,#254193); +#254191 = CARTESIAN_POINT('',(139.539987,-123.462432,1.51)); +#254192 = DIRECTION('',(-0.49993517485,0.866062827368,0.)); +#254193 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#254194 = ADVANCED_FACE('',(#254195),#254222,.T.); +#254195 = FACE_BOUND('',#254196,.T.); +#254196 = EDGE_LOOP('',(#254197,#254198,#254207,#254215)); +#254197 = ORIENTED_EDGE('',*,*,#254176,.T.); +#254198 = ORIENTED_EDGE('',*,*,#254199,.T.); +#254199 = EDGE_CURVE('',#254169,#254200,#254202,.T.); +#254200 = VERTEX_POINT('',#254201); +#254201 = CARTESIAN_POINT('',(139.390903,-123.617128,1.545)); +#254202 = CIRCLE('',#254203,0.299999934501); +#254203 = AXIS2_PLACEMENT_3D('',#254204,#254205,#254206); +#254204 = CARTESIAN_POINT('',(139.6680668594,-123.7319328594,1.545)); +#254205 = DIRECTION('',(-0.,0.,-1.)); +#254206 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#254207 = ORIENTED_EDGE('',*,*,#254208,.F.); +#254208 = EDGE_CURVE('',#254209,#254200,#254211,.T.); +#254209 = VERTEX_POINT('',#254210); +#254210 = CARTESIAN_POINT('',(139.390903,-123.617128,1.51)); +#254211 = LINE('',#254212,#254213); +#254212 = CARTESIAN_POINT('',(139.390903,-123.617128,1.51)); +#254213 = VECTOR('',#254214,1.); +#254214 = DIRECTION('',(0.,0.,1.)); +#254215 = ORIENTED_EDGE('',*,*,#254216,.F.); +#254216 = EDGE_CURVE('',#254177,#254209,#254217,.T.); +#254217 = CIRCLE('',#254218,0.299999934501); +#254218 = AXIS2_PLACEMENT_3D('',#254219,#254220,#254221); +#254219 = CARTESIAN_POINT('',(139.6680668594,-123.7319328594,1.51)); +#254220 = DIRECTION('',(-0.,0.,-1.)); +#254221 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#254222 = CYLINDRICAL_SURFACE('',#254223,0.299999934501); +#254223 = AXIS2_PLACEMENT_3D('',#254224,#254225,#254226); +#254224 = CARTESIAN_POINT('',(139.6680668594,-123.7319328594,1.51)); +#254225 = DIRECTION('',(-0.,0.,-1.)); +#254226 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#254227 = ADVANCED_FACE('',(#254228),#254253,.T.); +#254228 = FACE_BOUND('',#254229,.T.); +#254229 = EDGE_LOOP('',(#254230,#254231,#254239,#254247)); +#254230 = ORIENTED_EDGE('',*,*,#254208,.T.); +#254231 = ORIENTED_EDGE('',*,*,#254232,.T.); +#254232 = EDGE_CURVE('',#254200,#254233,#254235,.T.); +#254233 = VERTEX_POINT('',#254234); +#254234 = CARTESIAN_POINT('',(139.398566,-123.603853,1.545)); +#254235 = LINE('',#254236,#254237); +#254236 = CARTESIAN_POINT('',(139.390903,-123.617128,1.545)); +#254237 = VECTOR('',#254238,1.); +#254238 = DIRECTION('',(0.499935174848,0.866062827368,0.)); +#254239 = ORIENTED_EDGE('',*,*,#254240,.F.); +#254240 = EDGE_CURVE('',#254241,#254233,#254243,.T.); +#254241 = VERTEX_POINT('',#254242); +#254242 = CARTESIAN_POINT('',(139.398566,-123.603853,1.51)); +#254243 = LINE('',#254244,#254245); +#254244 = CARTESIAN_POINT('',(139.398566,-123.603853,1.51)); +#254245 = VECTOR('',#254246,1.); +#254246 = DIRECTION('',(0.,0.,1.)); +#254247 = ORIENTED_EDGE('',*,*,#254248,.F.); +#254248 = EDGE_CURVE('',#254209,#254241,#254249,.T.); +#254249 = LINE('',#254250,#254251); +#254250 = CARTESIAN_POINT('',(139.390903,-123.617128,1.51)); +#254251 = VECTOR('',#254252,1.); +#254252 = DIRECTION('',(0.499935174848,0.866062827368,0.)); +#254253 = PLANE('',#254254); +#254254 = AXIS2_PLACEMENT_3D('',#254255,#254256,#254257); +#254255 = CARTESIAN_POINT('',(139.390903,-123.617128,1.51)); +#254256 = DIRECTION('',(-0.866062827368,0.499935174848,0.)); +#254257 = DIRECTION('',(0.499935174848,0.866062827368,0.)); +#254258 = ADVANCED_FACE('',(#254259),#254284,.T.); +#254259 = FACE_BOUND('',#254260,.T.); +#254260 = EDGE_LOOP('',(#254261,#254262,#254270,#254278)); +#254261 = ORIENTED_EDGE('',*,*,#254240,.T.); +#254262 = ORIENTED_EDGE('',*,*,#254263,.T.); +#254263 = EDGE_CURVE('',#254233,#254264,#254266,.T.); +#254264 = VERTEX_POINT('',#254265); +#254265 = CARTESIAN_POINT('',(138.316853,-122.519423,1.545)); +#254266 = LINE('',#254267,#254268); +#254267 = CARTESIAN_POINT('',(139.398566,-123.603853,1.545)); +#254268 = VECTOR('',#254269,1.); +#254269 = DIRECTION('',(-0.706219299381,0.707993150519,0.)); +#254270 = ORIENTED_EDGE('',*,*,#254271,.F.); +#254271 = EDGE_CURVE('',#254272,#254264,#254274,.T.); +#254272 = VERTEX_POINT('',#254273); +#254273 = CARTESIAN_POINT('',(138.316853,-122.519423,1.51)); +#254274 = LINE('',#254275,#254276); +#254275 = CARTESIAN_POINT('',(138.316853,-122.519423,1.51)); +#254276 = VECTOR('',#254277,1.); +#254277 = DIRECTION('',(0.,0.,1.)); +#254278 = ORIENTED_EDGE('',*,*,#254279,.F.); +#254279 = EDGE_CURVE('',#254241,#254272,#254280,.T.); +#254280 = LINE('',#254281,#254282); +#254281 = CARTESIAN_POINT('',(139.398566,-123.603853,1.51)); +#254282 = VECTOR('',#254283,1.); +#254283 = DIRECTION('',(-0.706219299381,0.707993150519,0.)); +#254284 = PLANE('',#254285); +#254285 = AXIS2_PLACEMENT_3D('',#254286,#254287,#254288); +#254286 = CARTESIAN_POINT('',(139.398566,-123.603853,1.51)); +#254287 = DIRECTION('',(-0.707993150519,-0.706219299381,0.)); +#254288 = DIRECTION('',(-0.706219299381,0.707993150519,0.)); +#254289 = ADVANCED_FACE('',(#254290),#254315,.T.); +#254290 = FACE_BOUND('',#254291,.T.); +#254291 = EDGE_LOOP('',(#254292,#254293,#254301,#254309)); +#254292 = ORIENTED_EDGE('',*,*,#254271,.T.); +#254293 = ORIENTED_EDGE('',*,*,#254294,.T.); +#254294 = EDGE_CURVE('',#254264,#254295,#254297,.T.); +#254295 = VERTEX_POINT('',#254296); +#254296 = CARTESIAN_POINT('',(138.301921,-122.483375,1.545)); +#254297 = LINE('',#254298,#254299); +#254298 = CARTESIAN_POINT('',(138.316853,-122.519423,1.545)); +#254299 = VECTOR('',#254300,1.); +#254300 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254301 = ORIENTED_EDGE('',*,*,#254302,.F.); +#254302 = EDGE_CURVE('',#254303,#254295,#254305,.T.); +#254303 = VERTEX_POINT('',#254304); +#254304 = CARTESIAN_POINT('',(138.301921,-122.483375,1.51)); +#254305 = LINE('',#254306,#254307); +#254306 = CARTESIAN_POINT('',(138.301921,-122.483375,1.51)); +#254307 = VECTOR('',#254308,1.); +#254308 = DIRECTION('',(0.,0.,1.)); +#254309 = ORIENTED_EDGE('',*,*,#254310,.F.); +#254310 = EDGE_CURVE('',#254272,#254303,#254311,.T.); +#254311 = LINE('',#254312,#254313); +#254312 = CARTESIAN_POINT('',(138.316853,-122.519423,1.51)); +#254313 = VECTOR('',#254314,1.); +#254314 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254315 = PLANE('',#254316); +#254316 = AXIS2_PLACEMENT_3D('',#254317,#254318,#254319); +#254317 = CARTESIAN_POINT('',(138.316853,-122.519423,1.51)); +#254318 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#254319 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254320 = ADVANCED_FACE('',(#254321),#254346,.T.); +#254321 = FACE_BOUND('',#254322,.T.); +#254322 = EDGE_LOOP('',(#254323,#254324,#254332,#254340)); +#254323 = ORIENTED_EDGE('',*,*,#254302,.T.); +#254324 = ORIENTED_EDGE('',*,*,#254325,.T.); +#254325 = EDGE_CURVE('',#254295,#254326,#254328,.T.); +#254326 = VERTEX_POINT('',#254327); +#254327 = CARTESIAN_POINT('',(138.3,-90.641422,1.545)); +#254328 = LINE('',#254329,#254330); +#254329 = CARTESIAN_POINT('',(138.301921,-122.483375,1.545)); +#254330 = VECTOR('',#254331,1.); +#254331 = DIRECTION('',(-6.03292139928E-05,0.99999999818,0.)); +#254332 = ORIENTED_EDGE('',*,*,#254333,.F.); +#254333 = EDGE_CURVE('',#254334,#254326,#254336,.T.); +#254334 = VERTEX_POINT('',#254335); +#254335 = CARTESIAN_POINT('',(138.3,-90.641422,1.51)); +#254336 = LINE('',#254337,#254338); +#254337 = CARTESIAN_POINT('',(138.3,-90.641422,1.51)); +#254338 = VECTOR('',#254339,1.); +#254339 = DIRECTION('',(0.,0.,1.)); +#254340 = ORIENTED_EDGE('',*,*,#254341,.F.); +#254341 = EDGE_CURVE('',#254303,#254334,#254342,.T.); +#254342 = LINE('',#254343,#254344); +#254343 = CARTESIAN_POINT('',(138.301921,-122.483375,1.51)); +#254344 = VECTOR('',#254345,1.); +#254345 = DIRECTION('',(-6.03292139928E-05,0.99999999818,0.)); +#254346 = PLANE('',#254347); +#254347 = AXIS2_PLACEMENT_3D('',#254348,#254349,#254350); +#254348 = CARTESIAN_POINT('',(138.301921,-122.483375,1.51)); +#254349 = DIRECTION('',(-0.99999999818,-6.03292139928E-05,0.)); +#254350 = DIRECTION('',(-6.03292139928E-05,0.99999999818,0.)); +#254351 = ADVANCED_FACE('',(#254352),#254377,.T.); +#254352 = FACE_BOUND('',#254353,.T.); +#254353 = EDGE_LOOP('',(#254354,#254355,#254363,#254371)); +#254354 = ORIENTED_EDGE('',*,*,#254333,.T.); +#254355 = ORIENTED_EDGE('',*,*,#254356,.T.); +#254356 = EDGE_CURVE('',#254326,#254357,#254359,.T.); +#254357 = VERTEX_POINT('',#254358); +#254358 = CARTESIAN_POINT('',(136.074264,-88.415686,1.545)); +#254359 = LINE('',#254360,#254361); +#254360 = CARTESIAN_POINT('',(138.3,-90.641422,1.545)); +#254361 = VECTOR('',#254362,1.); +#254362 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#254363 = ORIENTED_EDGE('',*,*,#254364,.F.); +#254364 = EDGE_CURVE('',#254365,#254357,#254367,.T.); +#254365 = VERTEX_POINT('',#254366); +#254366 = CARTESIAN_POINT('',(136.074264,-88.415686,1.51)); +#254367 = LINE('',#254368,#254369); +#254368 = CARTESIAN_POINT('',(136.074264,-88.415686,1.51)); +#254369 = VECTOR('',#254370,1.); +#254370 = DIRECTION('',(0.,0.,1.)); +#254371 = ORIENTED_EDGE('',*,*,#254372,.F.); +#254372 = EDGE_CURVE('',#254334,#254365,#254373,.T.); +#254373 = LINE('',#254374,#254375); +#254374 = CARTESIAN_POINT('',(138.3,-90.641422,1.51)); +#254375 = VECTOR('',#254376,1.); +#254376 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#254377 = PLANE('',#254378); +#254378 = AXIS2_PLACEMENT_3D('',#254379,#254380,#254381); +#254379 = CARTESIAN_POINT('',(138.3,-90.641422,1.51)); +#254380 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#254381 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#254382 = ADVANCED_FACE('',(#254383),#254408,.T.); +#254383 = FACE_BOUND('',#254384,.T.); +#254384 = EDGE_LOOP('',(#254385,#254386,#254394,#254402)); +#254385 = ORIENTED_EDGE('',*,*,#254364,.T.); +#254386 = ORIENTED_EDGE('',*,*,#254387,.T.); +#254387 = EDGE_CURVE('',#254357,#254388,#254390,.T.); +#254388 = VERTEX_POINT('',#254389); +#254389 = CARTESIAN_POINT('',(135.804086,-88.683147,1.545)); +#254390 = LINE('',#254391,#254392); +#254391 = CARTESIAN_POINT('',(136.074264,-88.415686,1.545)); +#254392 = VECTOR('',#254393,1.); +#254393 = DIRECTION('',(-0.710671124912,-0.703524379262,0.)); +#254394 = ORIENTED_EDGE('',*,*,#254395,.F.); +#254395 = EDGE_CURVE('',#254396,#254388,#254398,.T.); +#254396 = VERTEX_POINT('',#254397); +#254397 = CARTESIAN_POINT('',(135.804086,-88.683147,1.51)); +#254398 = LINE('',#254399,#254400); +#254399 = CARTESIAN_POINT('',(135.804086,-88.683147,1.51)); +#254400 = VECTOR('',#254401,1.); +#254401 = DIRECTION('',(0.,0.,1.)); +#254402 = ORIENTED_EDGE('',*,*,#254403,.F.); +#254403 = EDGE_CURVE('',#254365,#254396,#254404,.T.); +#254404 = LINE('',#254405,#254406); +#254405 = CARTESIAN_POINT('',(136.074264,-88.415686,1.51)); +#254406 = VECTOR('',#254407,1.); +#254407 = DIRECTION('',(-0.710671124912,-0.703524379262,0.)); +#254408 = PLANE('',#254409); +#254409 = AXIS2_PLACEMENT_3D('',#254410,#254411,#254412); +#254410 = CARTESIAN_POINT('',(136.074264,-88.415686,1.51)); +#254411 = DIRECTION('',(0.703524379262,-0.710671124912,0.)); +#254412 = DIRECTION('',(-0.710671124912,-0.703524379262,0.)); +#254413 = ADVANCED_FACE('',(#254414),#254439,.T.); +#254414 = FACE_BOUND('',#254415,.T.); +#254415 = EDGE_LOOP('',(#254416,#254417,#254425,#254433)); +#254416 = ORIENTED_EDGE('',*,*,#254395,.T.); +#254417 = ORIENTED_EDGE('',*,*,#254418,.T.); +#254418 = EDGE_CURVE('',#254388,#254419,#254421,.T.); +#254419 = VERTEX_POINT('',#254420); +#254420 = CARTESIAN_POINT('',(135.768038,-88.698079,1.545)); +#254421 = LINE('',#254422,#254423); +#254422 = CARTESIAN_POINT('',(135.804086,-88.683147,1.545)); +#254423 = VECTOR('',#254424,1.); +#254424 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#254425 = ORIENTED_EDGE('',*,*,#254426,.F.); +#254426 = EDGE_CURVE('',#254427,#254419,#254429,.T.); +#254427 = VERTEX_POINT('',#254428); +#254428 = CARTESIAN_POINT('',(135.768038,-88.698079,1.51)); +#254429 = LINE('',#254430,#254431); +#254430 = CARTESIAN_POINT('',(135.768038,-88.698079,1.51)); +#254431 = VECTOR('',#254432,1.); +#254432 = DIRECTION('',(0.,0.,1.)); +#254433 = ORIENTED_EDGE('',*,*,#254434,.F.); +#254434 = EDGE_CURVE('',#254396,#254427,#254435,.T.); +#254435 = LINE('',#254436,#254437); +#254436 = CARTESIAN_POINT('',(135.804086,-88.683147,1.51)); +#254437 = VECTOR('',#254438,1.); +#254438 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#254439 = PLANE('',#254440); +#254440 = AXIS2_PLACEMENT_3D('',#254441,#254442,#254443); +#254441 = CARTESIAN_POINT('',(135.804086,-88.683147,1.51)); +#254442 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#254443 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#254444 = ADVANCED_FACE('',(#254445),#254470,.T.); +#254445 = FACE_BOUND('',#254446,.T.); +#254446 = EDGE_LOOP('',(#254447,#254448,#254456,#254464)); +#254447 = ORIENTED_EDGE('',*,*,#254426,.T.); +#254448 = ORIENTED_EDGE('',*,*,#254449,.T.); +#254449 = EDGE_CURVE('',#254419,#254450,#254452,.T.); +#254450 = VERTEX_POINT('',#254451); +#254451 = CARTESIAN_POINT('',(135.060391,-88.698079,1.545)); +#254452 = LINE('',#254453,#254454); +#254453 = CARTESIAN_POINT('',(135.768038,-88.698079,1.545)); +#254454 = VECTOR('',#254455,1.); +#254455 = DIRECTION('',(-1.,0.,0.)); +#254456 = ORIENTED_EDGE('',*,*,#254457,.F.); +#254457 = EDGE_CURVE('',#254458,#254450,#254460,.T.); +#254458 = VERTEX_POINT('',#254459); +#254459 = CARTESIAN_POINT('',(135.060391,-88.698079,1.51)); +#254460 = LINE('',#254461,#254462); +#254461 = CARTESIAN_POINT('',(135.060391,-88.698079,1.51)); +#254462 = VECTOR('',#254463,1.); +#254463 = DIRECTION('',(0.,0.,1.)); +#254464 = ORIENTED_EDGE('',*,*,#254465,.F.); +#254465 = EDGE_CURVE('',#254427,#254458,#254466,.T.); +#254466 = LINE('',#254467,#254468); +#254467 = CARTESIAN_POINT('',(135.768038,-88.698079,1.51)); +#254468 = VECTOR('',#254469,1.); +#254469 = DIRECTION('',(-1.,0.,0.)); +#254470 = PLANE('',#254471); +#254471 = AXIS2_PLACEMENT_3D('',#254472,#254473,#254474); +#254472 = CARTESIAN_POINT('',(135.768038,-88.698079,1.51)); +#254473 = DIRECTION('',(0.,-1.,0.)); +#254474 = DIRECTION('',(-1.,0.,0.)); +#254475 = ADVANCED_FACE('',(#254476),#254501,.T.); +#254476 = FACE_BOUND('',#254477,.T.); +#254477 = EDGE_LOOP('',(#254478,#254479,#254487,#254495)); +#254478 = ORIENTED_EDGE('',*,*,#254457,.T.); +#254479 = ORIENTED_EDGE('',*,*,#254480,.T.); +#254480 = EDGE_CURVE('',#254450,#254481,#254483,.T.); +#254481 = VERTEX_POINT('',#254482); +#254482 = CARTESIAN_POINT('',(135.024342,-88.683147,1.545)); +#254483 = LINE('',#254484,#254485); +#254484 = CARTESIAN_POINT('',(135.060391,-88.698079,1.545)); +#254485 = VECTOR('',#254486,1.); +#254486 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#254487 = ORIENTED_EDGE('',*,*,#254488,.F.); +#254488 = EDGE_CURVE('',#254489,#254481,#254491,.T.); +#254489 = VERTEX_POINT('',#254490); +#254490 = CARTESIAN_POINT('',(135.024342,-88.683147,1.51)); +#254491 = LINE('',#254492,#254493); +#254492 = CARTESIAN_POINT('',(135.024342,-88.683147,1.51)); +#254493 = VECTOR('',#254494,1.); +#254494 = DIRECTION('',(0.,0.,1.)); +#254495 = ORIENTED_EDGE('',*,*,#254496,.F.); +#254496 = EDGE_CURVE('',#254458,#254489,#254497,.T.); +#254497 = LINE('',#254498,#254499); +#254498 = CARTESIAN_POINT('',(135.060391,-88.698079,1.51)); +#254499 = VECTOR('',#254500,1.); +#254500 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#254501 = PLANE('',#254502); +#254502 = AXIS2_PLACEMENT_3D('',#254503,#254504,#254505); +#254503 = CARTESIAN_POINT('',(135.060391,-88.698079,1.51)); +#254504 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#254505 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#254506 = ADVANCED_FACE('',(#254507),#254532,.T.); +#254507 = FACE_BOUND('',#254508,.T.); +#254508 = EDGE_LOOP('',(#254509,#254510,#254518,#254526)); +#254509 = ORIENTED_EDGE('',*,*,#254488,.T.); +#254510 = ORIENTED_EDGE('',*,*,#254511,.T.); +#254511 = EDGE_CURVE('',#254481,#254512,#254514,.T.); +#254512 = VERTEX_POINT('',#254513); +#254513 = CARTESIAN_POINT('',(133.216853,-86.875656,1.545)); +#254514 = LINE('',#254515,#254516); +#254515 = CARTESIAN_POINT('',(135.024342,-88.683147,1.545)); +#254516 = VECTOR('',#254517,1.); +#254517 = DIRECTION('',(-0.707106389977,0.707107172396,0.)); +#254518 = ORIENTED_EDGE('',*,*,#254519,.F.); +#254519 = EDGE_CURVE('',#254520,#254512,#254522,.T.); +#254520 = VERTEX_POINT('',#254521); +#254521 = CARTESIAN_POINT('',(133.216853,-86.875656,1.51)); +#254522 = LINE('',#254523,#254524); +#254523 = CARTESIAN_POINT('',(133.216853,-86.875656,1.51)); +#254524 = VECTOR('',#254525,1.); +#254525 = DIRECTION('',(0.,0.,1.)); +#254526 = ORIENTED_EDGE('',*,*,#254527,.F.); +#254527 = EDGE_CURVE('',#254489,#254520,#254528,.T.); +#254528 = LINE('',#254529,#254530); +#254529 = CARTESIAN_POINT('',(135.024342,-88.683147,1.51)); +#254530 = VECTOR('',#254531,1.); +#254531 = DIRECTION('',(-0.707106389977,0.707107172396,0.)); +#254532 = PLANE('',#254533); +#254533 = AXIS2_PLACEMENT_3D('',#254534,#254535,#254536); +#254534 = CARTESIAN_POINT('',(135.024342,-88.683147,1.51)); +#254535 = DIRECTION('',(-0.707107172396,-0.707106389977,0.)); +#254536 = DIRECTION('',(-0.707106389977,0.707107172396,0.)); +#254537 = ADVANCED_FACE('',(#254538),#254563,.T.); +#254538 = FACE_BOUND('',#254539,.T.); +#254539 = EDGE_LOOP('',(#254540,#254541,#254549,#254557)); +#254540 = ORIENTED_EDGE('',*,*,#254519,.T.); +#254541 = ORIENTED_EDGE('',*,*,#254542,.T.); +#254542 = EDGE_CURVE('',#254512,#254543,#254545,.T.); +#254543 = VERTEX_POINT('',#254544); +#254544 = CARTESIAN_POINT('',(133.201921,-86.839608,1.545)); +#254545 = LINE('',#254546,#254547); +#254546 = CARTESIAN_POINT('',(133.216853,-86.875656,1.545)); +#254547 = VECTOR('',#254548,1.); +#254548 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254549 = ORIENTED_EDGE('',*,*,#254550,.F.); +#254550 = EDGE_CURVE('',#254551,#254543,#254553,.T.); +#254551 = VERTEX_POINT('',#254552); +#254552 = CARTESIAN_POINT('',(133.201921,-86.839608,1.51)); +#254553 = LINE('',#254554,#254555); +#254554 = CARTESIAN_POINT('',(133.201921,-86.839608,1.51)); +#254555 = VECTOR('',#254556,1.); +#254556 = DIRECTION('',(0.,0.,1.)); +#254557 = ORIENTED_EDGE('',*,*,#254558,.F.); +#254558 = EDGE_CURVE('',#254520,#254551,#254559,.T.); +#254559 = LINE('',#254560,#254561); +#254560 = CARTESIAN_POINT('',(133.216853,-86.875656,1.51)); +#254561 = VECTOR('',#254562,1.); +#254562 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254563 = PLANE('',#254564); +#254564 = AXIS2_PLACEMENT_3D('',#254565,#254566,#254567); +#254565 = CARTESIAN_POINT('',(133.216853,-86.875656,1.51)); +#254566 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#254567 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254568 = ADVANCED_FACE('',(#254569),#254594,.T.); +#254569 = FACE_BOUND('',#254570,.T.); +#254570 = EDGE_LOOP('',(#254571,#254572,#254580,#254588)); +#254571 = ORIENTED_EDGE('',*,*,#254550,.T.); +#254572 = ORIENTED_EDGE('',*,*,#254573,.T.); +#254573 = EDGE_CURVE('',#254543,#254574,#254576,.T.); +#254574 = VERTEX_POINT('',#254575); +#254575 = CARTESIAN_POINT('',(133.201921,-86.380491,1.545)); +#254576 = LINE('',#254577,#254578); +#254577 = CARTESIAN_POINT('',(133.201921,-86.839608,1.545)); +#254578 = VECTOR('',#254579,1.); +#254579 = DIRECTION('',(0.,1.,0.)); +#254580 = ORIENTED_EDGE('',*,*,#254581,.F.); +#254581 = EDGE_CURVE('',#254582,#254574,#254584,.T.); +#254582 = VERTEX_POINT('',#254583); +#254583 = CARTESIAN_POINT('',(133.201921,-86.380491,1.51)); +#254584 = LINE('',#254585,#254586); +#254585 = CARTESIAN_POINT('',(133.201921,-86.380491,1.51)); +#254586 = VECTOR('',#254587,1.); +#254587 = DIRECTION('',(0.,0.,1.)); +#254588 = ORIENTED_EDGE('',*,*,#254589,.F.); +#254589 = EDGE_CURVE('',#254551,#254582,#254590,.T.); +#254590 = LINE('',#254591,#254592); +#254591 = CARTESIAN_POINT('',(133.201921,-86.839608,1.51)); +#254592 = VECTOR('',#254593,1.); +#254593 = DIRECTION('',(0.,1.,0.)); +#254594 = PLANE('',#254595); +#254595 = AXIS2_PLACEMENT_3D('',#254596,#254597,#254598); +#254596 = CARTESIAN_POINT('',(133.201921,-86.839608,1.51)); +#254597 = DIRECTION('',(-1.,0.,0.)); +#254598 = DIRECTION('',(0.,1.,0.)); +#254599 = ADVANCED_FACE('',(#254600),#254625,.T.); +#254600 = FACE_BOUND('',#254601,.T.); +#254601 = EDGE_LOOP('',(#254602,#254603,#254611,#254619)); +#254602 = ORIENTED_EDGE('',*,*,#254581,.T.); +#254603 = ORIENTED_EDGE('',*,*,#254604,.T.); +#254604 = EDGE_CURVE('',#254574,#254605,#254607,.T.); +#254605 = VERTEX_POINT('',#254606); +#254606 = CARTESIAN_POINT('',(133.216853,-86.344443,1.545)); +#254607 = LINE('',#254608,#254609); +#254608 = CARTESIAN_POINT('',(133.201921,-86.380491,1.545)); +#254609 = VECTOR('',#254610,1.); +#254610 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254611 = ORIENTED_EDGE('',*,*,#254612,.F.); +#254612 = EDGE_CURVE('',#254613,#254605,#254615,.T.); +#254613 = VERTEX_POINT('',#254614); +#254614 = CARTESIAN_POINT('',(133.216853,-86.344443,1.51)); +#254615 = LINE('',#254616,#254617); +#254616 = CARTESIAN_POINT('',(133.216853,-86.344443,1.51)); +#254617 = VECTOR('',#254618,1.); +#254618 = DIRECTION('',(0.,0.,1.)); +#254619 = ORIENTED_EDGE('',*,*,#254620,.F.); +#254620 = EDGE_CURVE('',#254582,#254613,#254621,.T.); +#254621 = LINE('',#254622,#254623); +#254622 = CARTESIAN_POINT('',(133.201921,-86.380491,1.51)); +#254623 = VECTOR('',#254624,1.); +#254624 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254625 = PLANE('',#254626); +#254626 = AXIS2_PLACEMENT_3D('',#254627,#254628,#254629); +#254627 = CARTESIAN_POINT('',(133.201921,-86.380491,1.51)); +#254628 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#254629 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254630 = ADVANCED_FACE('',(#254631),#254656,.T.); +#254631 = FACE_BOUND('',#254632,.T.); +#254632 = EDGE_LOOP('',(#254633,#254634,#254642,#254650)); +#254633 = ORIENTED_EDGE('',*,*,#254612,.T.); +#254634 = ORIENTED_EDGE('',*,*,#254635,.T.); +#254635 = EDGE_CURVE('',#254605,#254636,#254638,.T.); +#254636 = VERTEX_POINT('',#254637); +#254637 = CARTESIAN_POINT('',(133.505,-86.053578,1.545)); +#254638 = LINE('',#254639,#254640); +#254639 = CARTESIAN_POINT('',(133.216853,-86.344443,1.545)); +#254640 = VECTOR('',#254641,1.); +#254641 = DIRECTION('',(0.703779724209,0.710418256939,0.)); +#254642 = ORIENTED_EDGE('',*,*,#254643,.F.); +#254643 = EDGE_CURVE('',#254644,#254636,#254646,.T.); +#254644 = VERTEX_POINT('',#254645); +#254645 = CARTESIAN_POINT('',(133.505,-86.053578,1.51)); +#254646 = LINE('',#254647,#254648); +#254647 = CARTESIAN_POINT('',(133.505,-86.053578,1.51)); +#254648 = VECTOR('',#254649,1.); +#254649 = DIRECTION('',(0.,0.,1.)); +#254650 = ORIENTED_EDGE('',*,*,#254651,.F.); +#254651 = EDGE_CURVE('',#254613,#254644,#254652,.T.); +#254652 = LINE('',#254653,#254654); +#254653 = CARTESIAN_POINT('',(133.216853,-86.344443,1.51)); +#254654 = VECTOR('',#254655,1.); +#254655 = DIRECTION('',(0.703779724209,0.710418256939,0.)); +#254656 = PLANE('',#254657); +#254657 = AXIS2_PLACEMENT_3D('',#254658,#254659,#254660); +#254658 = CARTESIAN_POINT('',(133.216853,-86.344443,1.51)); +#254659 = DIRECTION('',(-0.710418256939,0.703779724209,0.)); +#254660 = DIRECTION('',(0.703779724209,0.710418256939,0.)); +#254661 = ADVANCED_FACE('',(#254662),#254687,.T.); +#254662 = FACE_BOUND('',#254663,.T.); +#254663 = EDGE_LOOP('',(#254664,#254665,#254673,#254681)); +#254664 = ORIENTED_EDGE('',*,*,#254643,.T.); +#254665 = ORIENTED_EDGE('',*,*,#254666,.T.); +#254666 = EDGE_CURVE('',#254636,#254667,#254669,.T.); +#254667 = VERTEX_POINT('',#254668); +#254668 = CARTESIAN_POINT('',(133.506921,-85.975491,1.545)); +#254669 = LINE('',#254670,#254671); +#254670 = CARTESIAN_POINT('',(133.505,-86.053578,1.545)); +#254671 = VECTOR('',#254672,1.); +#254672 = DIRECTION('',(2.459332502663E-02,0.999697538441,0.)); +#254673 = ORIENTED_EDGE('',*,*,#254674,.F.); +#254674 = EDGE_CURVE('',#254675,#254667,#254677,.T.); +#254675 = VERTEX_POINT('',#254676); +#254676 = CARTESIAN_POINT('',(133.506921,-85.975491,1.51)); +#254677 = LINE('',#254678,#254679); +#254678 = CARTESIAN_POINT('',(133.506921,-85.975491,1.51)); +#254679 = VECTOR('',#254680,1.); +#254680 = DIRECTION('',(0.,0.,1.)); +#254681 = ORIENTED_EDGE('',*,*,#254682,.F.); +#254682 = EDGE_CURVE('',#254644,#254675,#254683,.T.); +#254683 = LINE('',#254684,#254685); +#254684 = CARTESIAN_POINT('',(133.505,-86.053578,1.51)); +#254685 = VECTOR('',#254686,1.); +#254686 = DIRECTION('',(2.459332502663E-02,0.999697538441,0.)); +#254687 = PLANE('',#254688); +#254688 = AXIS2_PLACEMENT_3D('',#254689,#254690,#254691); +#254689 = CARTESIAN_POINT('',(133.505,-86.053578,1.51)); +#254690 = DIRECTION('',(-0.999697538441,2.459332502663E-02,0.)); +#254691 = DIRECTION('',(2.459332502663E-02,0.999697538441,0.)); +#254692 = ADVANCED_FACE('',(#254693),#254718,.T.); +#254693 = FACE_BOUND('',#254694,.T.); +#254694 = EDGE_LOOP('',(#254695,#254696,#254704,#254712)); +#254695 = ORIENTED_EDGE('',*,*,#254674,.T.); +#254696 = ORIENTED_EDGE('',*,*,#254697,.T.); +#254697 = EDGE_CURVE('',#254667,#254698,#254700,.T.); +#254698 = VERTEX_POINT('',#254699); +#254699 = CARTESIAN_POINT('',(133.521853,-85.939443,1.545)); +#254700 = LINE('',#254701,#254702); +#254701 = CARTESIAN_POINT('',(133.506921,-85.975491,1.545)); +#254702 = VECTOR('',#254703,1.); +#254703 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254704 = ORIENTED_EDGE('',*,*,#254705,.F.); +#254705 = EDGE_CURVE('',#254706,#254698,#254708,.T.); +#254706 = VERTEX_POINT('',#254707); +#254707 = CARTESIAN_POINT('',(133.521853,-85.939443,1.51)); +#254708 = LINE('',#254709,#254710); +#254709 = CARTESIAN_POINT('',(133.521853,-85.939443,1.51)); +#254710 = VECTOR('',#254711,1.); +#254711 = DIRECTION('',(0.,0.,1.)); +#254712 = ORIENTED_EDGE('',*,*,#254713,.F.); +#254713 = EDGE_CURVE('',#254675,#254706,#254714,.T.); +#254714 = LINE('',#254715,#254716); +#254715 = CARTESIAN_POINT('',(133.506921,-85.975491,1.51)); +#254716 = VECTOR('',#254717,1.); +#254717 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254718 = PLANE('',#254719); +#254719 = AXIS2_PLACEMENT_3D('',#254720,#254721,#254722); +#254720 = CARTESIAN_POINT('',(133.506921,-85.975491,1.51)); +#254721 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#254722 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#254723 = ADVANCED_FACE('',(#254724),#254749,.T.); +#254724 = FACE_BOUND('',#254725,.T.); +#254725 = EDGE_LOOP('',(#254726,#254727,#254735,#254743)); +#254726 = ORIENTED_EDGE('',*,*,#254705,.T.); +#254727 = ORIENTED_EDGE('',*,*,#254728,.T.); +#254728 = EDGE_CURVE('',#254698,#254729,#254731,.T.); +#254729 = VERTEX_POINT('',#254730); +#254730 = CARTESIAN_POINT('',(134.484443,-84.976853,1.545)); +#254731 = LINE('',#254732,#254733); +#254732 = CARTESIAN_POINT('',(133.521853,-85.939443,1.545)); +#254733 = VECTOR('',#254734,1.); +#254734 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254735 = ORIENTED_EDGE('',*,*,#254736,.F.); +#254736 = EDGE_CURVE('',#254737,#254729,#254739,.T.); +#254737 = VERTEX_POINT('',#254738); +#254738 = CARTESIAN_POINT('',(134.484443,-84.976853,1.51)); +#254739 = LINE('',#254740,#254741); +#254740 = CARTESIAN_POINT('',(134.484443,-84.976853,1.51)); +#254741 = VECTOR('',#254742,1.); +#254742 = DIRECTION('',(0.,0.,1.)); +#254743 = ORIENTED_EDGE('',*,*,#254744,.F.); +#254744 = EDGE_CURVE('',#254706,#254737,#254745,.T.); +#254745 = LINE('',#254746,#254747); +#254746 = CARTESIAN_POINT('',(133.521853,-85.939443,1.51)); +#254747 = VECTOR('',#254748,1.); +#254748 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254749 = PLANE('',#254750); +#254750 = AXIS2_PLACEMENT_3D('',#254751,#254752,#254753); +#254751 = CARTESIAN_POINT('',(133.521853,-85.939443,1.51)); +#254752 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#254753 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#254754 = ADVANCED_FACE('',(#254755),#254780,.T.); +#254755 = FACE_BOUND('',#254756,.T.); +#254756 = EDGE_LOOP('',(#254757,#254758,#254766,#254774)); +#254757 = ORIENTED_EDGE('',*,*,#254736,.T.); +#254758 = ORIENTED_EDGE('',*,*,#254759,.T.); +#254759 = EDGE_CURVE('',#254729,#254760,#254762,.T.); +#254760 = VERTEX_POINT('',#254761); +#254761 = CARTESIAN_POINT('',(134.520491,-84.961921,1.545)); +#254762 = LINE('',#254763,#254764); +#254763 = CARTESIAN_POINT('',(134.484443,-84.976853,1.545)); +#254764 = VECTOR('',#254765,1.); +#254765 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254766 = ORIENTED_EDGE('',*,*,#254767,.F.); +#254767 = EDGE_CURVE('',#254768,#254760,#254770,.T.); +#254768 = VERTEX_POINT('',#254769); +#254769 = CARTESIAN_POINT('',(134.520491,-84.961921,1.51)); +#254770 = LINE('',#254771,#254772); +#254771 = CARTESIAN_POINT('',(134.520491,-84.961921,1.51)); +#254772 = VECTOR('',#254773,1.); +#254773 = DIRECTION('',(0.,0.,1.)); +#254774 = ORIENTED_EDGE('',*,*,#254775,.F.); +#254775 = EDGE_CURVE('',#254737,#254768,#254776,.T.); +#254776 = LINE('',#254777,#254778); +#254777 = CARTESIAN_POINT('',(134.484443,-84.976853,1.51)); +#254778 = VECTOR('',#254779,1.); +#254779 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254780 = PLANE('',#254781); +#254781 = AXIS2_PLACEMENT_3D('',#254782,#254783,#254784); +#254782 = CARTESIAN_POINT('',(134.484443,-84.976853,1.51)); +#254783 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254784 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254785 = ADVANCED_FACE('',(#254786),#254811,.T.); +#254786 = FACE_BOUND('',#254787,.T.); +#254787 = EDGE_LOOP('',(#254788,#254789,#254797,#254805)); +#254788 = ORIENTED_EDGE('',*,*,#254767,.T.); +#254789 = ORIENTED_EDGE('',*,*,#254790,.T.); +#254790 = EDGE_CURVE('',#254760,#254791,#254793,.T.); +#254791 = VERTEX_POINT('',#254792); +#254792 = CARTESIAN_POINT('',(134.926318,-84.96,1.545)); +#254793 = LINE('',#254794,#254795); +#254794 = CARTESIAN_POINT('',(134.520491,-84.961921,1.545)); +#254795 = VECTOR('',#254796,1.); +#254796 = DIRECTION('',(0.999988796968,4.733491066357E-03,0.)); +#254797 = ORIENTED_EDGE('',*,*,#254798,.F.); +#254798 = EDGE_CURVE('',#254799,#254791,#254801,.T.); +#254799 = VERTEX_POINT('',#254800); +#254800 = CARTESIAN_POINT('',(134.926318,-84.96,1.51)); +#254801 = LINE('',#254802,#254803); +#254802 = CARTESIAN_POINT('',(134.926318,-84.96,1.51)); +#254803 = VECTOR('',#254804,1.); +#254804 = DIRECTION('',(0.,0.,1.)); +#254805 = ORIENTED_EDGE('',*,*,#254806,.F.); +#254806 = EDGE_CURVE('',#254768,#254799,#254807,.T.); +#254807 = LINE('',#254808,#254809); +#254808 = CARTESIAN_POINT('',(134.520491,-84.961921,1.51)); +#254809 = VECTOR('',#254810,1.); +#254810 = DIRECTION('',(0.999988796968,4.733491066357E-03,0.)); +#254811 = PLANE('',#254812); +#254812 = AXIS2_PLACEMENT_3D('',#254813,#254814,#254815); +#254813 = CARTESIAN_POINT('',(134.520491,-84.961921,1.51)); +#254814 = DIRECTION('',(-4.733491066357E-03,0.999988796968,0.)); +#254815 = DIRECTION('',(0.999988796968,4.733491066357E-03,0.)); +#254816 = ADVANCED_FACE('',(#254817),#254842,.T.); +#254817 = FACE_BOUND('',#254818,.T.); +#254818 = EDGE_LOOP('',(#254819,#254820,#254828,#254836)); +#254819 = ORIENTED_EDGE('',*,*,#254798,.T.); +#254820 = ORIENTED_EDGE('',*,*,#254821,.T.); +#254821 = EDGE_CURVE('',#254791,#254822,#254824,.T.); +#254822 = VERTEX_POINT('',#254823); +#254823 = CARTESIAN_POINT('',(135.312184,-84.576853,1.545)); +#254824 = LINE('',#254825,#254826); +#254825 = CARTESIAN_POINT('',(134.926318,-84.96,1.545)); +#254826 = VECTOR('',#254827,1.); +#254827 = DIRECTION('',(0.709602463889,0.704602258897,0.)); +#254828 = ORIENTED_EDGE('',*,*,#254829,.F.); +#254829 = EDGE_CURVE('',#254830,#254822,#254832,.T.); +#254830 = VERTEX_POINT('',#254831); +#254831 = CARTESIAN_POINT('',(135.312184,-84.576853,1.51)); +#254832 = LINE('',#254833,#254834); +#254833 = CARTESIAN_POINT('',(135.312184,-84.576853,1.51)); +#254834 = VECTOR('',#254835,1.); +#254835 = DIRECTION('',(0.,0.,1.)); +#254836 = ORIENTED_EDGE('',*,*,#254837,.F.); +#254837 = EDGE_CURVE('',#254799,#254830,#254838,.T.); +#254838 = LINE('',#254839,#254840); +#254839 = CARTESIAN_POINT('',(134.926318,-84.96,1.51)); +#254840 = VECTOR('',#254841,1.); +#254841 = DIRECTION('',(0.709602463889,0.704602258897,0.)); +#254842 = PLANE('',#254843); +#254843 = AXIS2_PLACEMENT_3D('',#254844,#254845,#254846); +#254844 = CARTESIAN_POINT('',(134.926318,-84.96,1.51)); +#254845 = DIRECTION('',(-0.704602258897,0.709602463889,0.)); +#254846 = DIRECTION('',(0.709602463889,0.704602258897,0.)); +#254847 = ADVANCED_FACE('',(#254848),#254873,.T.); +#254848 = FACE_BOUND('',#254849,.T.); +#254849 = EDGE_LOOP('',(#254850,#254851,#254859,#254867)); +#254850 = ORIENTED_EDGE('',*,*,#254829,.T.); +#254851 = ORIENTED_EDGE('',*,*,#254852,.T.); +#254852 = EDGE_CURVE('',#254822,#254853,#254855,.T.); +#254853 = VERTEX_POINT('',#254854); +#254854 = CARTESIAN_POINT('',(135.348232,-84.561921,1.545)); +#254855 = LINE('',#254856,#254857); +#254856 = CARTESIAN_POINT('',(135.312184,-84.576853,1.545)); +#254857 = VECTOR('',#254858,1.); +#254858 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254859 = ORIENTED_EDGE('',*,*,#254860,.F.); +#254860 = EDGE_CURVE('',#254861,#254853,#254863,.T.); +#254861 = VERTEX_POINT('',#254862); +#254862 = CARTESIAN_POINT('',(135.348232,-84.561921,1.51)); +#254863 = LINE('',#254864,#254865); +#254864 = CARTESIAN_POINT('',(135.348232,-84.561921,1.51)); +#254865 = VECTOR('',#254866,1.); +#254866 = DIRECTION('',(0.,0.,1.)); +#254867 = ORIENTED_EDGE('',*,*,#254868,.F.); +#254868 = EDGE_CURVE('',#254830,#254861,#254869,.T.); +#254869 = LINE('',#254870,#254871); +#254870 = CARTESIAN_POINT('',(135.312184,-84.576853,1.51)); +#254871 = VECTOR('',#254872,1.); +#254872 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254873 = PLANE('',#254874); +#254874 = AXIS2_PLACEMENT_3D('',#254875,#254876,#254877); +#254875 = CARTESIAN_POINT('',(135.312184,-84.576853,1.51)); +#254876 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#254877 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#254878 = ADVANCED_FACE('',(#254879),#254904,.T.); +#254879 = FACE_BOUND('',#254880,.T.); +#254880 = EDGE_LOOP('',(#254881,#254882,#254890,#254898)); +#254881 = ORIENTED_EDGE('',*,*,#254860,.T.); +#254882 = ORIENTED_EDGE('',*,*,#254883,.T.); +#254883 = EDGE_CURVE('',#254853,#254884,#254886,.T.); +#254884 = VERTEX_POINT('',#254885); +#254885 = CARTESIAN_POINT('',(136.030633,-84.56,1.545)); +#254886 = LINE('',#254887,#254888); +#254887 = CARTESIAN_POINT('',(135.348232,-84.561921,1.545)); +#254888 = VECTOR('',#254889,1.); +#254889 = DIRECTION('',(0.999996037741,2.815049199073E-03,0.)); +#254890 = ORIENTED_EDGE('',*,*,#254891,.F.); +#254891 = EDGE_CURVE('',#254892,#254884,#254894,.T.); +#254892 = VERTEX_POINT('',#254893); +#254893 = CARTESIAN_POINT('',(136.030633,-84.56,1.51)); +#254894 = LINE('',#254895,#254896); +#254895 = CARTESIAN_POINT('',(136.030633,-84.56,1.51)); +#254896 = VECTOR('',#254897,1.); +#254897 = DIRECTION('',(0.,0.,1.)); +#254898 = ORIENTED_EDGE('',*,*,#254899,.F.); +#254899 = EDGE_CURVE('',#254861,#254892,#254900,.T.); +#254900 = LINE('',#254901,#254902); +#254901 = CARTESIAN_POINT('',(135.348232,-84.561921,1.51)); +#254902 = VECTOR('',#254903,1.); +#254903 = DIRECTION('',(0.999996037741,2.815049199073E-03,0.)); +#254904 = PLANE('',#254905); +#254905 = AXIS2_PLACEMENT_3D('',#254906,#254907,#254908); +#254906 = CARTESIAN_POINT('',(135.348232,-84.561921,1.51)); +#254907 = DIRECTION('',(-2.815049199073E-03,0.999996037741,0.)); +#254908 = DIRECTION('',(0.999996037741,2.815049199073E-03,0.)); +#254909 = ADVANCED_FACE('',(#254910),#254935,.T.); +#254910 = FACE_BOUND('',#254911,.T.); +#254911 = EDGE_LOOP('',(#254912,#254913,#254921,#254929)); +#254912 = ORIENTED_EDGE('',*,*,#254891,.T.); +#254913 = ORIENTED_EDGE('',*,*,#254914,.T.); +#254914 = EDGE_CURVE('',#254884,#254915,#254917,.T.); +#254915 = VERTEX_POINT('',#254916); +#254916 = CARTESIAN_POINT('',(136.176499,-84.416852,1.545)); +#254917 = LINE('',#254918,#254919); +#254918 = CARTESIAN_POINT('',(136.030633,-84.56,1.545)); +#254919 = VECTOR('',#254920,1.); +#254920 = DIRECTION('',(0.713725127091,0.70042590112,0.)); +#254921 = ORIENTED_EDGE('',*,*,#254922,.F.); +#254922 = EDGE_CURVE('',#254923,#254915,#254925,.T.); +#254923 = VERTEX_POINT('',#254924); +#254924 = CARTESIAN_POINT('',(136.176499,-84.416852,1.51)); +#254925 = LINE('',#254926,#254927); +#254926 = CARTESIAN_POINT('',(136.176499,-84.416852,1.51)); +#254927 = VECTOR('',#254928,1.); +#254928 = DIRECTION('',(0.,0.,1.)); +#254929 = ORIENTED_EDGE('',*,*,#254930,.F.); +#254930 = EDGE_CURVE('',#254892,#254923,#254931,.T.); +#254931 = LINE('',#254932,#254933); +#254932 = CARTESIAN_POINT('',(136.030633,-84.56,1.51)); +#254933 = VECTOR('',#254934,1.); +#254934 = DIRECTION('',(0.713725127091,0.70042590112,0.)); +#254935 = PLANE('',#254936); +#254936 = AXIS2_PLACEMENT_3D('',#254937,#254938,#254939); +#254937 = CARTESIAN_POINT('',(136.030633,-84.56,1.51)); +#254938 = DIRECTION('',(-0.70042590112,0.713725127091,0.)); +#254939 = DIRECTION('',(0.713725127091,0.70042590112,0.)); +#254940 = ADVANCED_FACE('',(#254941),#254966,.T.); +#254941 = FACE_BOUND('',#254942,.T.); +#254942 = EDGE_LOOP('',(#254943,#254944,#254952,#254960)); +#254943 = ORIENTED_EDGE('',*,*,#254922,.T.); +#254944 = ORIENTED_EDGE('',*,*,#254945,.T.); +#254945 = EDGE_CURVE('',#254915,#254946,#254948,.T.); +#254946 = VERTEX_POINT('',#254947); +#254947 = CARTESIAN_POINT('',(136.212547,-84.401921,1.545)); +#254948 = LINE('',#254949,#254950); +#254949 = CARTESIAN_POINT('',(136.176499,-84.416852,1.545)); +#254950 = VECTOR('',#254951,1.); +#254951 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#254952 = ORIENTED_EDGE('',*,*,#254953,.F.); +#254953 = EDGE_CURVE('',#254954,#254946,#254956,.T.); +#254954 = VERTEX_POINT('',#254955); +#254955 = CARTESIAN_POINT('',(136.212547,-84.401921,1.51)); +#254956 = LINE('',#254957,#254958); +#254957 = CARTESIAN_POINT('',(136.212547,-84.401921,1.51)); +#254958 = VECTOR('',#254959,1.); +#254959 = DIRECTION('',(0.,0.,1.)); +#254960 = ORIENTED_EDGE('',*,*,#254961,.F.); +#254961 = EDGE_CURVE('',#254923,#254954,#254962,.T.); +#254962 = LINE('',#254963,#254964); +#254963 = CARTESIAN_POINT('',(136.176499,-84.416852,1.51)); +#254964 = VECTOR('',#254965,1.); +#254965 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#254966 = PLANE('',#254967); +#254967 = AXIS2_PLACEMENT_3D('',#254968,#254969,#254970); +#254968 = CARTESIAN_POINT('',(136.176499,-84.416852,1.51)); +#254969 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#254970 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#254971 = ADVANCED_FACE('',(#254972),#254997,.T.); +#254972 = FACE_BOUND('',#254973,.T.); +#254973 = EDGE_LOOP('',(#254974,#254975,#254983,#254991)); +#254974 = ORIENTED_EDGE('',*,*,#254953,.T.); +#254975 = ORIENTED_EDGE('',*,*,#254976,.T.); +#254976 = EDGE_CURVE('',#254946,#254977,#254979,.T.); +#254977 = VERTEX_POINT('',#254978); +#254978 = CARTESIAN_POINT('',(138.019263,-84.4,1.545)); +#254979 = LINE('',#254980,#254981); +#254980 = CARTESIAN_POINT('',(136.212547,-84.401921,1.545)); +#254981 = VECTOR('',#254982,1.); +#254982 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#254983 = ORIENTED_EDGE('',*,*,#254984,.F.); +#254984 = EDGE_CURVE('',#254985,#254977,#254987,.T.); +#254985 = VERTEX_POINT('',#254986); +#254986 = CARTESIAN_POINT('',(138.019263,-84.4,1.51)); +#254987 = LINE('',#254988,#254989); +#254988 = CARTESIAN_POINT('',(138.019263,-84.4,1.51)); +#254989 = VECTOR('',#254990,1.); +#254990 = DIRECTION('',(0.,0.,1.)); +#254991 = ORIENTED_EDGE('',*,*,#254992,.F.); +#254992 = EDGE_CURVE('',#254954,#254985,#254993,.T.); +#254993 = LINE('',#254994,#254995); +#254994 = CARTESIAN_POINT('',(136.212547,-84.401921,1.51)); +#254995 = VECTOR('',#254996,1.); +#254996 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#254997 = PLANE('',#254998); +#254998 = AXIS2_PLACEMENT_3D('',#254999,#255000,#255001); +#254999 = CARTESIAN_POINT('',(136.212547,-84.401921,1.51)); +#255000 = DIRECTION('',(-1.063254498294E-03,0.999999434745,0.)); +#255001 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#255002 = ADVANCED_FACE('',(#255003),#255028,.T.); +#255003 = FACE_BOUND('',#255004,.T.); +#255004 = EDGE_LOOP('',(#255005,#255006,#255014,#255022)); +#255005 = ORIENTED_EDGE('',*,*,#254984,.T.); +#255006 = ORIENTED_EDGE('',*,*,#255007,.T.); +#255007 = EDGE_CURVE('',#254977,#255008,#255010,.T.); +#255008 = VERTEX_POINT('',#255009); +#255009 = CARTESIAN_POINT('',(138.935,-83.484264,1.545)); +#255010 = LINE('',#255011,#255012); +#255011 = CARTESIAN_POINT('',(138.019263,-84.4,1.545)); +#255012 = VECTOR('',#255013,1.); +#255013 = DIRECTION('',(0.707107167273,0.7071063951,0.)); +#255014 = ORIENTED_EDGE('',*,*,#255015,.F.); +#255015 = EDGE_CURVE('',#255016,#255008,#255018,.T.); +#255016 = VERTEX_POINT('',#255017); +#255017 = CARTESIAN_POINT('',(138.935,-83.484264,1.51)); +#255018 = LINE('',#255019,#255020); +#255019 = CARTESIAN_POINT('',(138.935,-83.484264,1.51)); +#255020 = VECTOR('',#255021,1.); +#255021 = DIRECTION('',(0.,0.,1.)); +#255022 = ORIENTED_EDGE('',*,*,#255023,.F.); +#255023 = EDGE_CURVE('',#254985,#255016,#255024,.T.); +#255024 = LINE('',#255025,#255026); +#255025 = CARTESIAN_POINT('',(138.019263,-84.4,1.51)); +#255026 = VECTOR('',#255027,1.); +#255027 = DIRECTION('',(0.707107167273,0.7071063951,0.)); +#255028 = PLANE('',#255029); +#255029 = AXIS2_PLACEMENT_3D('',#255030,#255031,#255032); +#255030 = CARTESIAN_POINT('',(138.019263,-84.4,1.51)); +#255031 = DIRECTION('',(-0.7071063951,0.707107167273,0.)); +#255032 = DIRECTION('',(0.707107167273,0.7071063951,0.)); +#255033 = ADVANCED_FACE('',(#255034),#255059,.T.); +#255034 = FACE_BOUND('',#255035,.T.); +#255035 = EDGE_LOOP('',(#255036,#255037,#255045,#255053)); +#255036 = ORIENTED_EDGE('',*,*,#255015,.T.); +#255037 = ORIENTED_EDGE('',*,*,#255038,.T.); +#255038 = EDGE_CURVE('',#255008,#255039,#255041,.T.); +#255039 = VERTEX_POINT('',#255040); +#255040 = CARTESIAN_POINT('',(138.936921,-83.440491,1.545)); +#255041 = LINE('',#255042,#255043); +#255042 = CARTESIAN_POINT('',(138.935,-83.484264,1.545)); +#255043 = VECTOR('',#255044,1.); +#255044 = DIRECTION('',(4.384330078261E-02,0.99903842017,0.)); +#255045 = ORIENTED_EDGE('',*,*,#255046,.F.); +#255046 = EDGE_CURVE('',#255047,#255039,#255049,.T.); +#255047 = VERTEX_POINT('',#255048); +#255048 = CARTESIAN_POINT('',(138.936921,-83.440491,1.51)); +#255049 = LINE('',#255050,#255051); +#255050 = CARTESIAN_POINT('',(138.936921,-83.440491,1.51)); +#255051 = VECTOR('',#255052,1.); +#255052 = DIRECTION('',(0.,0.,1.)); +#255053 = ORIENTED_EDGE('',*,*,#255054,.F.); +#255054 = EDGE_CURVE('',#255016,#255047,#255055,.T.); +#255055 = LINE('',#255056,#255057); +#255056 = CARTESIAN_POINT('',(138.935,-83.484264,1.51)); +#255057 = VECTOR('',#255058,1.); +#255058 = DIRECTION('',(4.384330078261E-02,0.99903842017,0.)); +#255059 = PLANE('',#255060); +#255060 = AXIS2_PLACEMENT_3D('',#255061,#255062,#255063); +#255061 = CARTESIAN_POINT('',(138.935,-83.484264,1.51)); +#255062 = DIRECTION('',(-0.99903842017,4.384330078261E-02,0.)); +#255063 = DIRECTION('',(4.384330078261E-02,0.99903842017,0.)); +#255064 = ADVANCED_FACE('',(#255065),#255092,.T.); +#255065 = FACE_BOUND('',#255066,.T.); +#255066 = EDGE_LOOP('',(#255067,#255068,#255077,#255085)); +#255067 = ORIENTED_EDGE('',*,*,#255046,.T.); +#255068 = ORIENTED_EDGE('',*,*,#255069,.T.); +#255069 = EDGE_CURVE('',#255039,#255070,#255072,.T.); +#255070 = VERTEX_POINT('',#255071); +#255071 = CARTESIAN_POINT('',(139.015491,-83.361921,1.545)); +#255072 = CIRCLE('',#255073,0.100002891901); +#255073 = AXIS2_PLACEMENT_3D('',#255074,#255075,#255076); +#255074 = CARTESIAN_POINT('',(139.03500207103,-83.46000207103,1.545)); +#255075 = DIRECTION('',(0.,0.,-1.)); +#255076 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#255077 = ORIENTED_EDGE('',*,*,#255078,.F.); +#255078 = EDGE_CURVE('',#255079,#255070,#255081,.T.); +#255079 = VERTEX_POINT('',#255080); +#255080 = CARTESIAN_POINT('',(139.015491,-83.361921,1.51)); +#255081 = LINE('',#255082,#255083); +#255082 = CARTESIAN_POINT('',(139.015491,-83.361921,1.51)); +#255083 = VECTOR('',#255084,1.); +#255084 = DIRECTION('',(0.,0.,1.)); +#255085 = ORIENTED_EDGE('',*,*,#255086,.F.); +#255086 = EDGE_CURVE('',#255047,#255079,#255087,.T.); +#255087 = CIRCLE('',#255088,0.100002891901); +#255088 = AXIS2_PLACEMENT_3D('',#255089,#255090,#255091); +#255089 = CARTESIAN_POINT('',(139.03500207103,-83.46000207103,1.51)); +#255090 = DIRECTION('',(0.,0.,-1.)); +#255091 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#255092 = CYLINDRICAL_SURFACE('',#255093,0.100002891901); +#255093 = AXIS2_PLACEMENT_3D('',#255094,#255095,#255096); +#255094 = CARTESIAN_POINT('',(139.03500207103,-83.46000207103,1.51)); +#255095 = DIRECTION('',(0.,0.,-1.)); +#255096 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#255097 = ADVANCED_FACE('',(#255098),#255123,.T.); +#255098 = FACE_BOUND('',#255099,.T.); +#255099 = EDGE_LOOP('',(#255100,#255101,#255109,#255117)); +#255100 = ORIENTED_EDGE('',*,*,#255078,.T.); +#255101 = ORIENTED_EDGE('',*,*,#255102,.T.); +#255102 = EDGE_CURVE('',#255070,#255103,#255105,.T.); +#255103 = VERTEX_POINT('',#255104); +#255104 = CARTESIAN_POINT('',(139.805,-83.36,1.545)); +#255105 = LINE('',#255106,#255107); +#255106 = CARTESIAN_POINT('',(139.015491,-83.361921,1.545)); +#255107 = VECTOR('',#255108,1.); +#255108 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#255109 = ORIENTED_EDGE('',*,*,#255110,.F.); +#255110 = EDGE_CURVE('',#255111,#255103,#255113,.T.); +#255111 = VERTEX_POINT('',#255112); +#255112 = CARTESIAN_POINT('',(139.805,-83.36,1.51)); +#255113 = LINE('',#255114,#255115); +#255114 = CARTESIAN_POINT('',(139.805,-83.36,1.51)); +#255115 = VECTOR('',#255116,1.); +#255116 = DIRECTION('',(0.,0.,1.)); +#255117 = ORIENTED_EDGE('',*,*,#255118,.F.); +#255118 = EDGE_CURVE('',#255079,#255111,#255119,.T.); +#255119 = LINE('',#255120,#255121); +#255120 = CARTESIAN_POINT('',(139.015491,-83.361921,1.51)); +#255121 = VECTOR('',#255122,1.); +#255122 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#255123 = PLANE('',#255124); +#255124 = AXIS2_PLACEMENT_3D('',#255125,#255126,#255127); +#255125 = CARTESIAN_POINT('',(139.015491,-83.361921,1.51)); +#255126 = DIRECTION('',(-2.433150620974E-03,0.999997039885,0.)); +#255127 = DIRECTION('',(0.999997039885,2.433150620974E-03,0.)); +#255128 = ADVANCED_FACE('',(#255129),#255154,.T.); +#255129 = FACE_BOUND('',#255130,.T.); +#255130 = EDGE_LOOP('',(#255131,#255132,#255140,#255148)); +#255131 = ORIENTED_EDGE('',*,*,#255110,.T.); +#255132 = ORIENTED_EDGE('',*,*,#255133,.T.); +#255133 = EDGE_CURVE('',#255103,#255134,#255136,.T.); +#255134 = VERTEX_POINT('',#255135); +#255135 = CARTESIAN_POINT('',(139.806921,-82.390491,1.545)); +#255136 = LINE('',#255137,#255138); +#255137 = CARTESIAN_POINT('',(139.805,-83.36,1.545)); +#255138 = VECTOR('',#255139,1.); +#255139 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#255140 = ORIENTED_EDGE('',*,*,#255141,.F.); +#255141 = EDGE_CURVE('',#255142,#255134,#255144,.T.); +#255142 = VERTEX_POINT('',#255143); +#255143 = CARTESIAN_POINT('',(139.806921,-82.390491,1.51)); +#255144 = LINE('',#255145,#255146); +#255145 = CARTESIAN_POINT('',(139.806921,-82.390491,1.51)); +#255146 = VECTOR('',#255147,1.); +#255147 = DIRECTION('',(0.,0.,1.)); +#255148 = ORIENTED_EDGE('',*,*,#255149,.F.); +#255149 = EDGE_CURVE('',#255111,#255142,#255150,.T.); +#255150 = LINE('',#255151,#255152); +#255151 = CARTESIAN_POINT('',(139.805,-83.36,1.51)); +#255152 = VECTOR('',#255153,1.); +#255153 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#255154 = PLANE('',#255155); +#255155 = AXIS2_PLACEMENT_3D('',#255156,#255157,#255158); +#255156 = CARTESIAN_POINT('',(139.805,-83.36,1.51)); +#255157 = DIRECTION('',(-0.999998037002,1.981411445446E-03,0.)); +#255158 = DIRECTION('',(1.981411445446E-03,0.999998037002,0.)); +#255159 = ADVANCED_FACE('',(#255160),#255185,.T.); +#255160 = FACE_BOUND('',#255161,.T.); +#255161 = EDGE_LOOP('',(#255162,#255163,#255171,#255179)); +#255162 = ORIENTED_EDGE('',*,*,#255141,.T.); +#255163 = ORIENTED_EDGE('',*,*,#255164,.T.); +#255164 = EDGE_CURVE('',#255134,#255165,#255167,.T.); +#255165 = VERTEX_POINT('',#255166); +#255166 = CARTESIAN_POINT('',(139.821853,-82.354443,1.545)); +#255167 = LINE('',#255168,#255169); +#255168 = CARTESIAN_POINT('',(139.806921,-82.390491,1.545)); +#255169 = VECTOR('',#255170,1.); +#255170 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255171 = ORIENTED_EDGE('',*,*,#255172,.F.); +#255172 = EDGE_CURVE('',#255173,#255165,#255175,.T.); +#255173 = VERTEX_POINT('',#255174); +#255174 = CARTESIAN_POINT('',(139.821853,-82.354443,1.51)); +#255175 = LINE('',#255176,#255177); +#255176 = CARTESIAN_POINT('',(139.821853,-82.354443,1.51)); +#255177 = VECTOR('',#255178,1.); +#255178 = DIRECTION('',(0.,0.,1.)); +#255179 = ORIENTED_EDGE('',*,*,#255180,.F.); +#255180 = EDGE_CURVE('',#255142,#255173,#255181,.T.); +#255181 = LINE('',#255182,#255183); +#255182 = CARTESIAN_POINT('',(139.806921,-82.390491,1.51)); +#255183 = VECTOR('',#255184,1.); +#255184 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255185 = PLANE('',#255186); +#255186 = AXIS2_PLACEMENT_3D('',#255187,#255188,#255189); +#255187 = CARTESIAN_POINT('',(139.806921,-82.390491,1.51)); +#255188 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#255189 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255190 = ADVANCED_FACE('',(#255191),#255207,.T.); +#255191 = FACE_BOUND('',#255192,.T.); +#255192 = EDGE_LOOP('',(#255193,#255194,#255200,#255201)); +#255193 = ORIENTED_EDGE('',*,*,#255172,.T.); +#255194 = ORIENTED_EDGE('',*,*,#255195,.T.); +#255195 = EDGE_CURVE('',#255165,#253318,#255196,.T.); +#255196 = LINE('',#255197,#255198); +#255197 = CARTESIAN_POINT('',(139.821853,-82.354443,1.545)); +#255198 = VECTOR('',#255199,1.); +#255199 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255200 = ORIENTED_EDGE('',*,*,#253315,.F.); +#255201 = ORIENTED_EDGE('',*,*,#255202,.F.); +#255202 = EDGE_CURVE('',#255173,#253316,#255203,.T.); +#255203 = LINE('',#255204,#255205); +#255204 = CARTESIAN_POINT('',(139.821853,-82.354443,1.51)); +#255205 = VECTOR('',#255206,1.); +#255206 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255207 = PLANE('',#255208); +#255208 = AXIS2_PLACEMENT_3D('',#255209,#255210,#255211); +#255209 = CARTESIAN_POINT('',(139.821853,-82.354443,1.51)); +#255210 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#255211 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255212 = ADVANCED_FACE('',(#255213),#255240,.F.); +#255213 = FACE_BOUND('',#255214,.T.); +#255214 = EDGE_LOOP('',(#255215,#255225,#255232,#255233)); +#255215 = ORIENTED_EDGE('',*,*,#255216,.T.); +#255216 = EDGE_CURVE('',#255217,#255219,#255221,.T.); +#255217 = VERTEX_POINT('',#255218); +#255218 = CARTESIAN_POINT('',(139.805322,-123.731933,1.51)); +#255219 = VERTEX_POINT('',#255220); +#255220 = CARTESIAN_POINT('',(139.805322,-123.731933,1.545)); +#255221 = LINE('',#255222,#255223); +#255222 = CARTESIAN_POINT('',(139.805322,-123.731933,1.51)); +#255223 = VECTOR('',#255224,1.); +#255224 = DIRECTION('',(0.,0.,1.)); +#255225 = ORIENTED_EDGE('',*,*,#255226,.T.); +#255226 = EDGE_CURVE('',#255219,#255219,#255227,.T.); +#255227 = CIRCLE('',#255228,0.137255); +#255228 = AXIS2_PLACEMENT_3D('',#255229,#255230,#255231); +#255229 = CARTESIAN_POINT('',(139.668067,-123.731933,1.545)); +#255230 = DIRECTION('',(0.,0.,1.)); +#255231 = DIRECTION('',(1.,0.,-0.)); +#255232 = ORIENTED_EDGE('',*,*,#255216,.F.); +#255233 = ORIENTED_EDGE('',*,*,#255234,.F.); +#255234 = EDGE_CURVE('',#255217,#255217,#255235,.T.); +#255235 = CIRCLE('',#255236,0.137255); +#255236 = AXIS2_PLACEMENT_3D('',#255237,#255238,#255239); +#255237 = CARTESIAN_POINT('',(139.668067,-123.731933,1.51)); +#255238 = DIRECTION('',(0.,0.,1.)); +#255239 = DIRECTION('',(1.,0.,-0.)); +#255240 = CYLINDRICAL_SURFACE('',#255241,0.137255); +#255241 = AXIS2_PLACEMENT_3D('',#255242,#255243,#255244); +#255242 = CARTESIAN_POINT('',(139.668067,-123.731933,1.51)); +#255243 = DIRECTION('',(-0.,-0.,-1.)); +#255244 = DIRECTION('',(1.,0.,-0.)); +#255245 = ADVANCED_FACE('',(#255246,#255309),#255312,.F.); +#255246 = FACE_BOUND('',#255247,.T.); +#255247 = EDGE_LOOP('',(#255248,#255249,#255250,#255251,#255252,#255253, + #255254,#255255,#255256,#255257,#255258,#255259,#255260,#255261, + #255262,#255263,#255264,#255265,#255266,#255267,#255268,#255269, + #255270,#255271,#255272,#255273,#255274,#255275,#255276,#255277, + #255278,#255279,#255280,#255281,#255282,#255283,#255284,#255285, + #255286,#255287,#255288,#255289,#255290,#255291,#255292,#255293, + #255294,#255295,#255296,#255297,#255298,#255299,#255300,#255301, + #255302,#255303,#255304,#255305,#255306,#255307,#255308)); +#255248 = ORIENTED_EDGE('',*,*,#253342,.T.); +#255249 = ORIENTED_EDGE('',*,*,#253374,.T.); +#255250 = ORIENTED_EDGE('',*,*,#253406,.T.); +#255251 = ORIENTED_EDGE('',*,*,#253438,.T.); +#255252 = ORIENTED_EDGE('',*,*,#253469,.T.); +#255253 = ORIENTED_EDGE('',*,*,#253500,.T.); +#255254 = ORIENTED_EDGE('',*,*,#253531,.T.); +#255255 = ORIENTED_EDGE('',*,*,#253562,.T.); +#255256 = ORIENTED_EDGE('',*,*,#253593,.T.); +#255257 = ORIENTED_EDGE('',*,*,#253624,.T.); +#255258 = ORIENTED_EDGE('',*,*,#253655,.T.); +#255259 = ORIENTED_EDGE('',*,*,#253686,.T.); +#255260 = ORIENTED_EDGE('',*,*,#253717,.T.); +#255261 = ORIENTED_EDGE('',*,*,#253748,.T.); +#255262 = ORIENTED_EDGE('',*,*,#253779,.T.); +#255263 = ORIENTED_EDGE('',*,*,#253810,.T.); +#255264 = ORIENTED_EDGE('',*,*,#253841,.T.); +#255265 = ORIENTED_EDGE('',*,*,#253872,.T.); +#255266 = ORIENTED_EDGE('',*,*,#253903,.T.); +#255267 = ORIENTED_EDGE('',*,*,#253934,.T.); +#255268 = ORIENTED_EDGE('',*,*,#253965,.T.); +#255269 = ORIENTED_EDGE('',*,*,#253996,.T.); +#255270 = ORIENTED_EDGE('',*,*,#254028,.T.); +#255271 = ORIENTED_EDGE('',*,*,#254060,.T.); +#255272 = ORIENTED_EDGE('',*,*,#254091,.T.); +#255273 = ORIENTED_EDGE('',*,*,#254122,.T.); +#255274 = ORIENTED_EDGE('',*,*,#254153,.T.); +#255275 = ORIENTED_EDGE('',*,*,#254184,.T.); +#255276 = ORIENTED_EDGE('',*,*,#254216,.T.); +#255277 = ORIENTED_EDGE('',*,*,#254248,.T.); +#255278 = ORIENTED_EDGE('',*,*,#254279,.T.); +#255279 = ORIENTED_EDGE('',*,*,#254310,.T.); +#255280 = ORIENTED_EDGE('',*,*,#254341,.T.); +#255281 = ORIENTED_EDGE('',*,*,#254372,.T.); +#255282 = ORIENTED_EDGE('',*,*,#254403,.T.); +#255283 = ORIENTED_EDGE('',*,*,#254434,.T.); +#255284 = ORIENTED_EDGE('',*,*,#254465,.T.); +#255285 = ORIENTED_EDGE('',*,*,#254496,.T.); +#255286 = ORIENTED_EDGE('',*,*,#254527,.T.); +#255287 = ORIENTED_EDGE('',*,*,#254558,.T.); +#255288 = ORIENTED_EDGE('',*,*,#254589,.T.); +#255289 = ORIENTED_EDGE('',*,*,#254620,.T.); +#255290 = ORIENTED_EDGE('',*,*,#254651,.T.); +#255291 = ORIENTED_EDGE('',*,*,#254682,.T.); +#255292 = ORIENTED_EDGE('',*,*,#254713,.T.); +#255293 = ORIENTED_EDGE('',*,*,#254744,.T.); +#255294 = ORIENTED_EDGE('',*,*,#254775,.T.); +#255295 = ORIENTED_EDGE('',*,*,#254806,.T.); +#255296 = ORIENTED_EDGE('',*,*,#254837,.T.); +#255297 = ORIENTED_EDGE('',*,*,#254868,.T.); +#255298 = ORIENTED_EDGE('',*,*,#254899,.T.); +#255299 = ORIENTED_EDGE('',*,*,#254930,.T.); +#255300 = ORIENTED_EDGE('',*,*,#254961,.T.); +#255301 = ORIENTED_EDGE('',*,*,#254992,.T.); +#255302 = ORIENTED_EDGE('',*,*,#255023,.T.); +#255303 = ORIENTED_EDGE('',*,*,#255054,.T.); +#255304 = ORIENTED_EDGE('',*,*,#255086,.T.); +#255305 = ORIENTED_EDGE('',*,*,#255118,.T.); +#255306 = ORIENTED_EDGE('',*,*,#255149,.T.); +#255307 = ORIENTED_EDGE('',*,*,#255180,.T.); +#255308 = ORIENTED_EDGE('',*,*,#255202,.T.); +#255309 = FACE_BOUND('',#255310,.T.); +#255310 = EDGE_LOOP('',(#255311)); +#255311 = ORIENTED_EDGE('',*,*,#255234,.T.); +#255312 = PLANE('',#255313); +#255313 = AXIS2_PLACEMENT_3D('',#255314,#255315,#255316); +#255314 = CARTESIAN_POINT('',(0.,0.,1.51)); +#255315 = DIRECTION('',(0.,0.,1.)); +#255316 = DIRECTION('',(1.,0.,-0.)); +#255317 = ADVANCED_FACE('',(#255318,#255381),#255384,.T.); +#255318 = FACE_BOUND('',#255319,.F.); +#255319 = EDGE_LOOP('',(#255320,#255321,#255322,#255323,#255324,#255325, + #255326,#255327,#255328,#255329,#255330,#255331,#255332,#255333, + #255334,#255335,#255336,#255337,#255338,#255339,#255340,#255341, + #255342,#255343,#255344,#255345,#255346,#255347,#255348,#255349, + #255350,#255351,#255352,#255353,#255354,#255355,#255356,#255357, + #255358,#255359,#255360,#255361,#255362,#255363,#255364,#255365, + #255366,#255367,#255368,#255369,#255370,#255371,#255372,#255373, + #255374,#255375,#255376,#255377,#255378,#255379,#255380)); +#255320 = ORIENTED_EDGE('',*,*,#253325,.T.); +#255321 = ORIENTED_EDGE('',*,*,#253358,.T.); +#255322 = ORIENTED_EDGE('',*,*,#253389,.T.); +#255323 = ORIENTED_EDGE('',*,*,#253422,.T.); +#255324 = ORIENTED_EDGE('',*,*,#253453,.T.); +#255325 = ORIENTED_EDGE('',*,*,#253484,.T.); +#255326 = ORIENTED_EDGE('',*,*,#253515,.T.); +#255327 = ORIENTED_EDGE('',*,*,#253546,.T.); +#255328 = ORIENTED_EDGE('',*,*,#253577,.T.); +#255329 = ORIENTED_EDGE('',*,*,#253608,.T.); +#255330 = ORIENTED_EDGE('',*,*,#253639,.T.); +#255331 = ORIENTED_EDGE('',*,*,#253670,.T.); +#255332 = ORIENTED_EDGE('',*,*,#253701,.T.); +#255333 = ORIENTED_EDGE('',*,*,#253732,.T.); +#255334 = ORIENTED_EDGE('',*,*,#253763,.T.); +#255335 = ORIENTED_EDGE('',*,*,#253794,.T.); +#255336 = ORIENTED_EDGE('',*,*,#253825,.T.); +#255337 = ORIENTED_EDGE('',*,*,#253856,.T.); +#255338 = ORIENTED_EDGE('',*,*,#253887,.T.); +#255339 = ORIENTED_EDGE('',*,*,#253918,.T.); +#255340 = ORIENTED_EDGE('',*,*,#253949,.T.); +#255341 = ORIENTED_EDGE('',*,*,#253980,.T.); +#255342 = ORIENTED_EDGE('',*,*,#254011,.T.); +#255343 = ORIENTED_EDGE('',*,*,#254044,.T.); +#255344 = ORIENTED_EDGE('',*,*,#254075,.T.); +#255345 = ORIENTED_EDGE('',*,*,#254106,.T.); +#255346 = ORIENTED_EDGE('',*,*,#254137,.T.); +#255347 = ORIENTED_EDGE('',*,*,#254168,.T.); +#255348 = ORIENTED_EDGE('',*,*,#254199,.T.); +#255349 = ORIENTED_EDGE('',*,*,#254232,.T.); +#255350 = ORIENTED_EDGE('',*,*,#254263,.T.); +#255351 = ORIENTED_EDGE('',*,*,#254294,.T.); +#255352 = ORIENTED_EDGE('',*,*,#254325,.T.); +#255353 = ORIENTED_EDGE('',*,*,#254356,.T.); +#255354 = ORIENTED_EDGE('',*,*,#254387,.T.); +#255355 = ORIENTED_EDGE('',*,*,#254418,.T.); +#255356 = ORIENTED_EDGE('',*,*,#254449,.T.); +#255357 = ORIENTED_EDGE('',*,*,#254480,.T.); +#255358 = ORIENTED_EDGE('',*,*,#254511,.T.); +#255359 = ORIENTED_EDGE('',*,*,#254542,.T.); +#255360 = ORIENTED_EDGE('',*,*,#254573,.T.); +#255361 = ORIENTED_EDGE('',*,*,#254604,.T.); +#255362 = ORIENTED_EDGE('',*,*,#254635,.T.); +#255363 = ORIENTED_EDGE('',*,*,#254666,.T.); +#255364 = ORIENTED_EDGE('',*,*,#254697,.T.); +#255365 = ORIENTED_EDGE('',*,*,#254728,.T.); +#255366 = ORIENTED_EDGE('',*,*,#254759,.T.); +#255367 = ORIENTED_EDGE('',*,*,#254790,.T.); +#255368 = ORIENTED_EDGE('',*,*,#254821,.T.); +#255369 = ORIENTED_EDGE('',*,*,#254852,.T.); +#255370 = ORIENTED_EDGE('',*,*,#254883,.T.); +#255371 = ORIENTED_EDGE('',*,*,#254914,.T.); +#255372 = ORIENTED_EDGE('',*,*,#254945,.T.); +#255373 = ORIENTED_EDGE('',*,*,#254976,.T.); +#255374 = ORIENTED_EDGE('',*,*,#255007,.T.); +#255375 = ORIENTED_EDGE('',*,*,#255038,.T.); +#255376 = ORIENTED_EDGE('',*,*,#255069,.T.); +#255377 = ORIENTED_EDGE('',*,*,#255102,.T.); +#255378 = ORIENTED_EDGE('',*,*,#255133,.T.); +#255379 = ORIENTED_EDGE('',*,*,#255164,.T.); +#255380 = ORIENTED_EDGE('',*,*,#255195,.T.); +#255381 = FACE_BOUND('',#255382,.F.); +#255382 = EDGE_LOOP('',(#255383)); +#255383 = ORIENTED_EDGE('',*,*,#255226,.T.); +#255384 = PLANE('',#255385); +#255385 = AXIS2_PLACEMENT_3D('',#255386,#255387,#255388); +#255386 = CARTESIAN_POINT('',(0.,0.,1.545)); +#255387 = DIRECTION('',(0.,0.,1.)); +#255388 = DIRECTION('',(1.,0.,-0.)); +#255389 = MANIFOLD_SOLID_BREP('',#255390); +#255390 = CLOSED_SHELL('',(#255391,#255431,#255462,#255493,#255524, + #255555,#255586,#255617,#255648,#255679,#255712,#255743,#255774, + #255805,#255836,#255867,#255898,#255929,#255960,#255991,#256022, + #256053,#256086,#256108,#256141,#256174,#256211)); +#255391 = ADVANCED_FACE('',(#255392),#255426,.F.); +#255392 = FACE_BOUND('',#255393,.F.); +#255393 = EDGE_LOOP('',(#255394,#255404,#255412,#255420)); +#255394 = ORIENTED_EDGE('',*,*,#255395,.T.); +#255395 = EDGE_CURVE('',#255396,#255398,#255400,.T.); +#255396 = VERTEX_POINT('',#255397); +#255397 = CARTESIAN_POINT('',(139.539988,-124.001433,0.)); +#255398 = VERTEX_POINT('',#255399); +#255399 = CARTESIAN_POINT('',(139.539988,-124.001433,-3.5E-02)); +#255400 = LINE('',#255401,#255402); +#255401 = CARTESIAN_POINT('',(139.539988,-124.001433,0.)); +#255402 = VECTOR('',#255403,1.); +#255403 = DIRECTION('',(0.,0.,-1.)); +#255404 = ORIENTED_EDGE('',*,*,#255405,.T.); +#255405 = EDGE_CURVE('',#255398,#255406,#255408,.T.); +#255406 = VERTEX_POINT('',#255407); +#255407 = CARTESIAN_POINT('',(138.835557,-124.703147,-3.5E-02)); +#255408 = LINE('',#255409,#255410); +#255409 = CARTESIAN_POINT('',(139.539988,-124.001433,-3.5E-02)); +#255410 = VECTOR('',#255411,1.); +#255411 = DIRECTION('',(-0.708471753811,-0.705739168568,0.)); +#255412 = ORIENTED_EDGE('',*,*,#255413,.F.); +#255413 = EDGE_CURVE('',#255414,#255406,#255416,.T.); +#255414 = VERTEX_POINT('',#255415); +#255415 = CARTESIAN_POINT('',(138.835557,-124.703147,0.)); +#255416 = LINE('',#255417,#255418); +#255417 = CARTESIAN_POINT('',(138.835557,-124.703147,0.)); +#255418 = VECTOR('',#255419,1.); +#255419 = DIRECTION('',(0.,0.,-1.)); +#255420 = ORIENTED_EDGE('',*,*,#255421,.F.); +#255421 = EDGE_CURVE('',#255396,#255414,#255422,.T.); +#255422 = LINE('',#255423,#255424); +#255423 = CARTESIAN_POINT('',(139.539988,-124.001433,0.)); +#255424 = VECTOR('',#255425,1.); +#255425 = DIRECTION('',(-0.708471753811,-0.705739168568,0.)); +#255426 = PLANE('',#255427); +#255427 = AXIS2_PLACEMENT_3D('',#255428,#255429,#255430); +#255428 = CARTESIAN_POINT('',(139.539988,-124.001433,0.)); +#255429 = DIRECTION('',(-0.705739168568,0.708471753811,0.)); +#255430 = DIRECTION('',(-0.708471753811,-0.705739168568,0.)); +#255431 = ADVANCED_FACE('',(#255432),#255457,.F.); +#255432 = FACE_BOUND('',#255433,.F.); +#255433 = EDGE_LOOP('',(#255434,#255435,#255443,#255451)); +#255434 = ORIENTED_EDGE('',*,*,#255413,.T.); +#255435 = ORIENTED_EDGE('',*,*,#255436,.T.); +#255436 = EDGE_CURVE('',#255406,#255437,#255439,.T.); +#255437 = VERTEX_POINT('',#255438); +#255438 = CARTESIAN_POINT('',(138.799509,-124.718079,-3.5E-02)); +#255439 = LINE('',#255440,#255441); +#255440 = CARTESIAN_POINT('',(138.835557,-124.703147,-3.5E-02)); +#255441 = VECTOR('',#255442,1.); +#255442 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#255443 = ORIENTED_EDGE('',*,*,#255444,.F.); +#255444 = EDGE_CURVE('',#255445,#255437,#255447,.T.); +#255445 = VERTEX_POINT('',#255446); +#255446 = CARTESIAN_POINT('',(138.799509,-124.718079,0.)); +#255447 = LINE('',#255448,#255449); +#255448 = CARTESIAN_POINT('',(138.799509,-124.718079,0.)); +#255449 = VECTOR('',#255450,1.); +#255450 = DIRECTION('',(0.,0.,-1.)); +#255451 = ORIENTED_EDGE('',*,*,#255452,.F.); +#255452 = EDGE_CURVE('',#255414,#255445,#255453,.T.); +#255453 = LINE('',#255454,#255455); +#255454 = CARTESIAN_POINT('',(138.835557,-124.703147,0.)); +#255455 = VECTOR('',#255456,1.); +#255456 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#255457 = PLANE('',#255458); +#255458 = AXIS2_PLACEMENT_3D('',#255459,#255460,#255461); +#255459 = CARTESIAN_POINT('',(138.835557,-124.703147,0.)); +#255460 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#255461 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#255462 = ADVANCED_FACE('',(#255463),#255488,.F.); +#255463 = FACE_BOUND('',#255464,.F.); +#255464 = EDGE_LOOP('',(#255465,#255466,#255474,#255482)); +#255465 = ORIENTED_EDGE('',*,*,#255444,.T.); +#255466 = ORIENTED_EDGE('',*,*,#255467,.T.); +#255467 = EDGE_CURVE('',#255437,#255468,#255470,.T.); +#255468 = VERTEX_POINT('',#255469); +#255469 = CARTESIAN_POINT('',(125.485288,-124.72,-3.5E-02)); +#255470 = LINE('',#255471,#255472); +#255471 = CARTESIAN_POINT('',(138.799509,-124.718079,-3.5E-02)); +#255472 = VECTOR('',#255473,1.); +#255473 = DIRECTION('',(-0.999999989591,-1.442818156617E-04,0.)); +#255474 = ORIENTED_EDGE('',*,*,#255475,.F.); +#255475 = EDGE_CURVE('',#255476,#255468,#255478,.T.); +#255476 = VERTEX_POINT('',#255477); +#255477 = CARTESIAN_POINT('',(125.485288,-124.72,0.)); +#255478 = LINE('',#255479,#255480); +#255479 = CARTESIAN_POINT('',(125.485288,-124.72,0.)); +#255480 = VECTOR('',#255481,1.); +#255481 = DIRECTION('',(0.,0.,-1.)); +#255482 = ORIENTED_EDGE('',*,*,#255483,.F.); +#255483 = EDGE_CURVE('',#255445,#255476,#255484,.T.); +#255484 = LINE('',#255485,#255486); +#255485 = CARTESIAN_POINT('',(138.799509,-124.718079,0.)); +#255486 = VECTOR('',#255487,1.); +#255487 = DIRECTION('',(-0.999999989591,-1.442818156617E-04,0.)); +#255488 = PLANE('',#255489); +#255489 = AXIS2_PLACEMENT_3D('',#255490,#255491,#255492); +#255490 = CARTESIAN_POINT('',(138.799509,-124.718079,0.)); +#255491 = DIRECTION('',(-1.442818156617E-04,0.999999989591,0.)); +#255492 = DIRECTION('',(-0.999999989591,-1.442818156617E-04,0.)); +#255493 = ADVANCED_FACE('',(#255494),#255519,.F.); +#255494 = FACE_BOUND('',#255495,.F.); +#255495 = EDGE_LOOP('',(#255496,#255497,#255505,#255513)); +#255496 = ORIENTED_EDGE('',*,*,#255475,.T.); +#255497 = ORIENTED_EDGE('',*,*,#255498,.T.); +#255498 = EDGE_CURVE('',#255468,#255499,#255501,.T.); +#255499 = VERTEX_POINT('',#255500); +#255500 = CARTESIAN_POINT('',(123.0845,-127.120788,-3.5E-02)); +#255501 = LINE('',#255502,#255503); +#255502 = CARTESIAN_POINT('',(125.485288,-124.72,-3.5E-02)); +#255503 = VECTOR('',#255504,1.); +#255504 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#255505 = ORIENTED_EDGE('',*,*,#255506,.F.); +#255506 = EDGE_CURVE('',#255507,#255499,#255509,.T.); +#255507 = VERTEX_POINT('',#255508); +#255508 = CARTESIAN_POINT('',(123.0845,-127.120788,0.)); +#255509 = LINE('',#255510,#255511); +#255510 = CARTESIAN_POINT('',(123.0845,-127.120788,0.)); +#255511 = VECTOR('',#255512,1.); +#255512 = DIRECTION('',(0.,0.,-1.)); +#255513 = ORIENTED_EDGE('',*,*,#255514,.F.); +#255514 = EDGE_CURVE('',#255476,#255507,#255515,.T.); +#255515 = LINE('',#255516,#255517); +#255516 = CARTESIAN_POINT('',(125.485288,-124.72,0.)); +#255517 = VECTOR('',#255518,1.); +#255518 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#255519 = PLANE('',#255520); +#255520 = AXIS2_PLACEMENT_3D('',#255521,#255522,#255523); +#255521 = CARTESIAN_POINT('',(125.485288,-124.72,0.)); +#255522 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#255523 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#255524 = ADVANCED_FACE('',(#255525),#255550,.F.); +#255525 = FACE_BOUND('',#255526,.F.); +#255526 = EDGE_LOOP('',(#255527,#255528,#255536,#255544)); +#255527 = ORIENTED_EDGE('',*,*,#255506,.T.); +#255528 = ORIENTED_EDGE('',*,*,#255529,.T.); +#255529 = EDGE_CURVE('',#255499,#255530,#255532,.T.); +#255530 = VERTEX_POINT('',#255531); +#255531 = CARTESIAN_POINT('',(123.0845,-130.743078,-3.5E-02)); +#255532 = LINE('',#255533,#255534); +#255533 = CARTESIAN_POINT('',(123.0845,-127.120788,-3.5E-02)); +#255534 = VECTOR('',#255535,1.); +#255535 = DIRECTION('',(0.,-1.,0.)); +#255536 = ORIENTED_EDGE('',*,*,#255537,.F.); +#255537 = EDGE_CURVE('',#255538,#255530,#255540,.T.); +#255538 = VERTEX_POINT('',#255539); +#255539 = CARTESIAN_POINT('',(123.0845,-130.743078,0.)); +#255540 = LINE('',#255541,#255542); +#255541 = CARTESIAN_POINT('',(123.0845,-130.743078,0.)); +#255542 = VECTOR('',#255543,1.); +#255543 = DIRECTION('',(0.,0.,-1.)); +#255544 = ORIENTED_EDGE('',*,*,#255545,.F.); +#255545 = EDGE_CURVE('',#255507,#255538,#255546,.T.); +#255546 = LINE('',#255547,#255548); +#255547 = CARTESIAN_POINT('',(123.0845,-127.120788,0.)); +#255548 = VECTOR('',#255549,1.); +#255549 = DIRECTION('',(0.,-1.,0.)); +#255550 = PLANE('',#255551); +#255551 = AXIS2_PLACEMENT_3D('',#255552,#255553,#255554); +#255552 = CARTESIAN_POINT('',(123.0845,-127.120788,0.)); +#255553 = DIRECTION('',(-1.,-0.,-0.)); +#255554 = DIRECTION('',(0.,-1.,0.)); +#255555 = ADVANCED_FACE('',(#255556),#255581,.F.); +#255556 = FACE_BOUND('',#255557,.F.); +#255557 = EDGE_LOOP('',(#255558,#255559,#255567,#255575)); +#255558 = ORIENTED_EDGE('',*,*,#255537,.T.); +#255559 = ORIENTED_EDGE('',*,*,#255560,.T.); +#255560 = EDGE_CURVE('',#255530,#255561,#255563,.T.); +#255561 = VERTEX_POINT('',#255562); +#255562 = CARTESIAN_POINT('',(128.083147,-135.744443,-3.5E-02)); +#255563 = LINE('',#255564,#255565); +#255564 = CARTESIAN_POINT('',(123.0845,-130.743078,-3.5E-02)); +#255565 = VECTOR('',#255566,1.); +#255566 = DIRECTION('',(0.706914563682,-0.707298946453,0.)); +#255567 = ORIENTED_EDGE('',*,*,#255568,.F.); +#255568 = EDGE_CURVE('',#255569,#255561,#255571,.T.); +#255569 = VERTEX_POINT('',#255570); +#255570 = CARTESIAN_POINT('',(128.083147,-135.744443,0.)); +#255571 = LINE('',#255572,#255573); +#255572 = CARTESIAN_POINT('',(128.083147,-135.744443,0.)); +#255573 = VECTOR('',#255574,1.); +#255574 = DIRECTION('',(0.,0.,-1.)); +#255575 = ORIENTED_EDGE('',*,*,#255576,.F.); +#255576 = EDGE_CURVE('',#255538,#255569,#255577,.T.); +#255577 = LINE('',#255578,#255579); +#255578 = CARTESIAN_POINT('',(123.0845,-130.743078,0.)); +#255579 = VECTOR('',#255580,1.); +#255580 = DIRECTION('',(0.706914563682,-0.707298946453,0.)); +#255581 = PLANE('',#255582); +#255582 = AXIS2_PLACEMENT_3D('',#255583,#255584,#255585); +#255583 = CARTESIAN_POINT('',(123.0845,-130.743078,0.)); +#255584 = DIRECTION('',(-0.707298946453,-0.706914563682,-0.)); +#255585 = DIRECTION('',(0.706914563682,-0.707298946453,0.)); +#255586 = ADVANCED_FACE('',(#255587),#255612,.F.); +#255587 = FACE_BOUND('',#255588,.F.); +#255588 = EDGE_LOOP('',(#255589,#255590,#255598,#255606)); +#255589 = ORIENTED_EDGE('',*,*,#255568,.T.); +#255590 = ORIENTED_EDGE('',*,*,#255591,.T.); +#255591 = EDGE_CURVE('',#255561,#255592,#255594,.T.); +#255592 = VERTEX_POINT('',#255593); +#255593 = CARTESIAN_POINT('',(128.098079,-135.780491,-3.5E-02)); +#255594 = LINE('',#255595,#255596); +#255595 = CARTESIAN_POINT('',(128.083147,-135.744443,-3.5E-02)); +#255596 = VECTOR('',#255597,1.); +#255597 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#255598 = ORIENTED_EDGE('',*,*,#255599,.F.); +#255599 = EDGE_CURVE('',#255600,#255592,#255602,.T.); +#255600 = VERTEX_POINT('',#255601); +#255601 = CARTESIAN_POINT('',(128.098079,-135.780491,0.)); +#255602 = LINE('',#255603,#255604); +#255603 = CARTESIAN_POINT('',(128.098079,-135.780491,0.)); +#255604 = VECTOR('',#255605,1.); +#255605 = DIRECTION('',(0.,0.,-1.)); +#255606 = ORIENTED_EDGE('',*,*,#255607,.F.); +#255607 = EDGE_CURVE('',#255569,#255600,#255608,.T.); +#255608 = LINE('',#255609,#255610); +#255609 = CARTESIAN_POINT('',(128.083147,-135.744443,0.)); +#255610 = VECTOR('',#255611,1.); +#255611 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#255612 = PLANE('',#255613); +#255613 = AXIS2_PLACEMENT_3D('',#255614,#255615,#255616); +#255614 = CARTESIAN_POINT('',(128.083147,-135.744443,0.)); +#255615 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#255616 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#255617 = ADVANCED_FACE('',(#255618),#255643,.F.); +#255618 = FACE_BOUND('',#255619,.F.); +#255619 = EDGE_LOOP('',(#255620,#255621,#255629,#255637)); +#255620 = ORIENTED_EDGE('',*,*,#255599,.T.); +#255621 = ORIENTED_EDGE('',*,*,#255622,.T.); +#255622 = EDGE_CURVE('',#255592,#255623,#255625,.T.); +#255623 = VERTEX_POINT('',#255624); +#255624 = CARTESIAN_POINT('',(128.1,-139.918869,-3.5E-02)); +#255625 = LINE('',#255626,#255627); +#255626 = CARTESIAN_POINT('',(128.098079,-135.780491,-3.5E-02)); +#255627 = VECTOR('',#255628,1.); +#255628 = DIRECTION('',(4.641914762303E-04,-0.999999892263,0.)); +#255629 = ORIENTED_EDGE('',*,*,#255630,.F.); +#255630 = EDGE_CURVE('',#255631,#255623,#255633,.T.); +#255631 = VERTEX_POINT('',#255632); +#255632 = CARTESIAN_POINT('',(128.1,-139.918869,0.)); +#255633 = LINE('',#255634,#255635); +#255634 = CARTESIAN_POINT('',(128.1,-139.918869,0.)); +#255635 = VECTOR('',#255636,1.); +#255636 = DIRECTION('',(0.,0.,-1.)); +#255637 = ORIENTED_EDGE('',*,*,#255638,.F.); +#255638 = EDGE_CURVE('',#255600,#255631,#255639,.T.); +#255639 = LINE('',#255640,#255641); +#255640 = CARTESIAN_POINT('',(128.098079,-135.780491,0.)); +#255641 = VECTOR('',#255642,1.); +#255642 = DIRECTION('',(4.641914762303E-04,-0.999999892263,0.)); +#255643 = PLANE('',#255644); +#255644 = AXIS2_PLACEMENT_3D('',#255645,#255646,#255647); +#255645 = CARTESIAN_POINT('',(128.098079,-135.780491,0.)); +#255646 = DIRECTION('',(-0.999999892263,-4.641914762303E-04,-0.)); +#255647 = DIRECTION('',(4.641914762303E-04,-0.999999892263,0.)); +#255648 = ADVANCED_FACE('',(#255649),#255674,.F.); +#255649 = FACE_BOUND('',#255650,.F.); +#255650 = EDGE_LOOP('',(#255651,#255652,#255660,#255668)); +#255651 = ORIENTED_EDGE('',*,*,#255630,.T.); +#255652 = ORIENTED_EDGE('',*,*,#255653,.T.); +#255653 = EDGE_CURVE('',#255623,#255654,#255656,.T.); +#255654 = VERTEX_POINT('',#255655); +#255655 = CARTESIAN_POINT('',(128.114805,-139.922836,-3.5E-02)); +#255656 = LINE('',#255657,#255658); +#255657 = CARTESIAN_POINT('',(128.1,-139.918869,-3.5E-02)); +#255658 = VECTOR('',#255659,1.); +#255659 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#255660 = ORIENTED_EDGE('',*,*,#255661,.F.); +#255661 = EDGE_CURVE('',#255662,#255654,#255664,.T.); +#255662 = VERTEX_POINT('',#255663); +#255663 = CARTESIAN_POINT('',(128.114805,-139.922836,0.)); +#255664 = LINE('',#255665,#255666); +#255665 = CARTESIAN_POINT('',(128.114805,-139.922836,0.)); +#255666 = VECTOR('',#255667,1.); +#255667 = DIRECTION('',(0.,0.,-1.)); +#255668 = ORIENTED_EDGE('',*,*,#255669,.F.); +#255669 = EDGE_CURVE('',#255631,#255662,#255670,.T.); +#255670 = LINE('',#255671,#255672); +#255671 = CARTESIAN_POINT('',(128.1,-139.918869,0.)); +#255672 = VECTOR('',#255673,1.); +#255673 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#255674 = PLANE('',#255675); +#255675 = AXIS2_PLACEMENT_3D('',#255676,#255677,#255678); +#255676 = CARTESIAN_POINT('',(128.1,-139.918869,0.)); +#255677 = DIRECTION('',(-0.258819788118,-0.965925627198,-0.)); +#255678 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#255679 = ADVANCED_FACE('',(#255680),#255707,.T.); +#255680 = FACE_BOUND('',#255681,.F.); +#255681 = EDGE_LOOP('',(#255682,#255683,#255692,#255700)); +#255682 = ORIENTED_EDGE('',*,*,#255661,.T.); +#255683 = ORIENTED_EDGE('',*,*,#255684,.T.); +#255684 = EDGE_CURVE('',#255654,#255685,#255687,.T.); +#255685 = VERTEX_POINT('',#255686); +#255686 = CARTESIAN_POINT('',(127.885195,-139.922836,-3.5E-02)); +#255687 = CIRCLE('',#255688,0.299999850918); +#255688 = AXIS2_PLACEMENT_3D('',#255689,#255690,#255691); +#255689 = CARTESIAN_POINT('',(128.,-140.1999997106,-3.5E-02)); +#255690 = DIRECTION('',(0.,0.,-1.)); +#255691 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#255692 = ORIENTED_EDGE('',*,*,#255693,.F.); +#255693 = EDGE_CURVE('',#255694,#255685,#255696,.T.); +#255694 = VERTEX_POINT('',#255695); +#255695 = CARTESIAN_POINT('',(127.885195,-139.922836,0.)); +#255696 = LINE('',#255697,#255698); +#255697 = CARTESIAN_POINT('',(127.885195,-139.922836,0.)); +#255698 = VECTOR('',#255699,1.); +#255699 = DIRECTION('',(0.,0.,-1.)); +#255700 = ORIENTED_EDGE('',*,*,#255701,.F.); +#255701 = EDGE_CURVE('',#255662,#255694,#255702,.T.); +#255702 = CIRCLE('',#255703,0.299999850918); +#255703 = AXIS2_PLACEMENT_3D('',#255704,#255705,#255706); +#255704 = CARTESIAN_POINT('',(128.,-140.1999997106,0.)); +#255705 = DIRECTION('',(0.,0.,-1.)); +#255706 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#255707 = CYLINDRICAL_SURFACE('',#255708,0.299999850918); +#255708 = AXIS2_PLACEMENT_3D('',#255709,#255710,#255711); +#255709 = CARTESIAN_POINT('',(128.,-140.1999997106,0.)); +#255710 = DIRECTION('',(-0.,-0.,1.)); +#255711 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#255712 = ADVANCED_FACE('',(#255713),#255738,.F.); +#255713 = FACE_BOUND('',#255714,.F.); +#255714 = EDGE_LOOP('',(#255715,#255716,#255724,#255732)); +#255715 = ORIENTED_EDGE('',*,*,#255693,.T.); +#255716 = ORIENTED_EDGE('',*,*,#255717,.T.); +#255717 = EDGE_CURVE('',#255685,#255718,#255720,.T.); +#255718 = VERTEX_POINT('',#255719); +#255719 = CARTESIAN_POINT('',(127.9,-139.918869,-3.5E-02)); +#255720 = LINE('',#255721,#255722); +#255721 = CARTESIAN_POINT('',(127.885195,-139.922836,-3.5E-02)); +#255722 = VECTOR('',#255723,1.); +#255723 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#255724 = ORIENTED_EDGE('',*,*,#255725,.F.); +#255725 = EDGE_CURVE('',#255726,#255718,#255728,.T.); +#255726 = VERTEX_POINT('',#255727); +#255727 = CARTESIAN_POINT('',(127.9,-139.918869,0.)); +#255728 = LINE('',#255729,#255730); +#255729 = CARTESIAN_POINT('',(127.9,-139.918869,0.)); +#255730 = VECTOR('',#255731,1.); +#255731 = DIRECTION('',(0.,0.,-1.)); +#255732 = ORIENTED_EDGE('',*,*,#255733,.F.); +#255733 = EDGE_CURVE('',#255694,#255726,#255734,.T.); +#255734 = LINE('',#255735,#255736); +#255735 = CARTESIAN_POINT('',(127.885195,-139.922836,0.)); +#255736 = VECTOR('',#255737,1.); +#255737 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#255738 = PLANE('',#255739); +#255739 = AXIS2_PLACEMENT_3D('',#255740,#255741,#255742); +#255740 = CARTESIAN_POINT('',(127.885195,-139.922836,0.)); +#255741 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#255742 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#255743 = ADVANCED_FACE('',(#255744),#255769,.F.); +#255744 = FACE_BOUND('',#255745,.F.); +#255745 = EDGE_LOOP('',(#255746,#255747,#255755,#255763)); +#255746 = ORIENTED_EDGE('',*,*,#255725,.T.); +#255747 = ORIENTED_EDGE('',*,*,#255748,.T.); +#255748 = EDGE_CURVE('',#255718,#255749,#255751,.T.); +#255749 = VERTEX_POINT('',#255750); +#255750 = CARTESIAN_POINT('',(127.9,-135.841422,-3.5E-02)); +#255751 = LINE('',#255752,#255753); +#255752 = CARTESIAN_POINT('',(127.9,-139.918869,-3.5E-02)); +#255753 = VECTOR('',#255754,1.); +#255754 = DIRECTION('',(0.,1.,0.)); +#255755 = ORIENTED_EDGE('',*,*,#255756,.F.); +#255756 = EDGE_CURVE('',#255757,#255749,#255759,.T.); +#255757 = VERTEX_POINT('',#255758); +#255758 = CARTESIAN_POINT('',(127.9,-135.841422,0.)); +#255759 = LINE('',#255760,#255761); +#255760 = CARTESIAN_POINT('',(127.9,-135.841422,0.)); +#255761 = VECTOR('',#255762,1.); +#255762 = DIRECTION('',(0.,0.,-1.)); +#255763 = ORIENTED_EDGE('',*,*,#255764,.F.); +#255764 = EDGE_CURVE('',#255726,#255757,#255765,.T.); +#255765 = LINE('',#255766,#255767); +#255766 = CARTESIAN_POINT('',(127.9,-139.918869,0.)); +#255767 = VECTOR('',#255768,1.); +#255768 = DIRECTION('',(0.,1.,0.)); +#255769 = PLANE('',#255770); +#255770 = AXIS2_PLACEMENT_3D('',#255771,#255772,#255773); +#255771 = CARTESIAN_POINT('',(127.9,-139.918869,0.)); +#255772 = DIRECTION('',(1.,-0.,0.)); +#255773 = DIRECTION('',(0.,1.,0.)); +#255774 = ADVANCED_FACE('',(#255775),#255800,.F.); +#255775 = FACE_BOUND('',#255776,.F.); +#255776 = EDGE_LOOP('',(#255777,#255778,#255786,#255794)); +#255777 = ORIENTED_EDGE('',*,*,#255756,.T.); +#255778 = ORIENTED_EDGE('',*,*,#255779,.T.); +#255779 = EDGE_CURVE('',#255749,#255780,#255782,.T.); +#255780 = VERTEX_POINT('',#255781); +#255781 = CARTESIAN_POINT('',(122.901353,-130.840057,-3.5E-02)); +#255782 = LINE('',#255783,#255784); +#255783 = CARTESIAN_POINT('',(127.9,-135.841422,-3.5E-02)); +#255784 = VECTOR('',#255785,1.); +#255785 = DIRECTION('',(-0.706914563682,0.707298946453,0.)); +#255786 = ORIENTED_EDGE('',*,*,#255787,.F.); +#255787 = EDGE_CURVE('',#255788,#255780,#255790,.T.); +#255788 = VERTEX_POINT('',#255789); +#255789 = CARTESIAN_POINT('',(122.901353,-130.840057,0.)); +#255790 = LINE('',#255791,#255792); +#255791 = CARTESIAN_POINT('',(122.901353,-130.840057,0.)); +#255792 = VECTOR('',#255793,1.); +#255793 = DIRECTION('',(0.,0.,-1.)); +#255794 = ORIENTED_EDGE('',*,*,#255795,.F.); +#255795 = EDGE_CURVE('',#255757,#255788,#255796,.T.); +#255796 = LINE('',#255797,#255798); +#255797 = CARTESIAN_POINT('',(127.9,-135.841422,0.)); +#255798 = VECTOR('',#255799,1.); +#255799 = DIRECTION('',(-0.706914563682,0.707298946453,0.)); +#255800 = PLANE('',#255801); +#255801 = AXIS2_PLACEMENT_3D('',#255802,#255803,#255804); +#255802 = CARTESIAN_POINT('',(127.9,-135.841422,0.)); +#255803 = DIRECTION('',(0.707298946453,0.706914563682,0.)); +#255804 = DIRECTION('',(-0.706914563682,0.707298946453,0.)); +#255805 = ADVANCED_FACE('',(#255806),#255831,.F.); +#255806 = FACE_BOUND('',#255807,.F.); +#255807 = EDGE_LOOP('',(#255808,#255809,#255817,#255825)); +#255808 = ORIENTED_EDGE('',*,*,#255787,.T.); +#255809 = ORIENTED_EDGE('',*,*,#255810,.T.); +#255810 = EDGE_CURVE('',#255780,#255811,#255813,.T.); +#255811 = VERTEX_POINT('',#255812); +#255812 = CARTESIAN_POINT('',(122.886421,-130.804009,-3.5E-02)); +#255813 = LINE('',#255814,#255815); +#255814 = CARTESIAN_POINT('',(122.901353,-130.840057,-3.5E-02)); +#255815 = VECTOR('',#255816,1.); +#255816 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#255817 = ORIENTED_EDGE('',*,*,#255818,.F.); +#255818 = EDGE_CURVE('',#255819,#255811,#255821,.T.); +#255819 = VERTEX_POINT('',#255820); +#255820 = CARTESIAN_POINT('',(122.886421,-130.804009,0.)); +#255821 = LINE('',#255822,#255823); +#255822 = CARTESIAN_POINT('',(122.886421,-130.804009,0.)); +#255823 = VECTOR('',#255824,1.); +#255824 = DIRECTION('',(0.,0.,-1.)); +#255825 = ORIENTED_EDGE('',*,*,#255826,.F.); +#255826 = EDGE_CURVE('',#255788,#255819,#255827,.T.); +#255827 = LINE('',#255828,#255829); +#255828 = CARTESIAN_POINT('',(122.901353,-130.840057,0.)); +#255829 = VECTOR('',#255830,1.); +#255830 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#255831 = PLANE('',#255832); +#255832 = AXIS2_PLACEMENT_3D('',#255833,#255834,#255835); +#255833 = CARTESIAN_POINT('',(122.901353,-130.840057,0.)); +#255834 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#255835 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#255836 = ADVANCED_FACE('',(#255837),#255862,.F.); +#255837 = FACE_BOUND('',#255838,.F.); +#255838 = EDGE_LOOP('',(#255839,#255840,#255848,#255856)); +#255839 = ORIENTED_EDGE('',*,*,#255818,.T.); +#255840 = ORIENTED_EDGE('',*,*,#255841,.T.); +#255841 = EDGE_CURVE('',#255811,#255842,#255844,.T.); +#255842 = VERTEX_POINT('',#255843); +#255843 = CARTESIAN_POINT('',(122.886421,-127.059857,-3.5E-02)); +#255844 = LINE('',#255845,#255846); +#255845 = CARTESIAN_POINT('',(122.886421,-130.804009,-3.5E-02)); +#255846 = VECTOR('',#255847,1.); +#255847 = DIRECTION('',(0.,1.,0.)); +#255848 = ORIENTED_EDGE('',*,*,#255849,.F.); +#255849 = EDGE_CURVE('',#255850,#255842,#255852,.T.); +#255850 = VERTEX_POINT('',#255851); +#255851 = CARTESIAN_POINT('',(122.886421,-127.059857,0.)); +#255852 = LINE('',#255853,#255854); +#255853 = CARTESIAN_POINT('',(122.886421,-127.059857,0.)); +#255854 = VECTOR('',#255855,1.); +#255855 = DIRECTION('',(0.,0.,-1.)); +#255856 = ORIENTED_EDGE('',*,*,#255857,.F.); +#255857 = EDGE_CURVE('',#255819,#255850,#255858,.T.); +#255858 = LINE('',#255859,#255860); +#255859 = CARTESIAN_POINT('',(122.886421,-130.804009,0.)); +#255860 = VECTOR('',#255861,1.); +#255861 = DIRECTION('',(0.,1.,0.)); +#255862 = PLANE('',#255863); +#255863 = AXIS2_PLACEMENT_3D('',#255864,#255865,#255866); +#255864 = CARTESIAN_POINT('',(122.886421,-130.804009,0.)); +#255865 = DIRECTION('',(1.,-0.,0.)); +#255866 = DIRECTION('',(0.,1.,0.)); +#255867 = ADVANCED_FACE('',(#255868),#255893,.F.); +#255868 = FACE_BOUND('',#255869,.F.); +#255869 = EDGE_LOOP('',(#255870,#255871,#255879,#255887)); +#255870 = ORIENTED_EDGE('',*,*,#255849,.T.); +#255871 = ORIENTED_EDGE('',*,*,#255872,.T.); +#255872 = EDGE_CURVE('',#255842,#255873,#255875,.T.); +#255873 = VERTEX_POINT('',#255874); +#255874 = CARTESIAN_POINT('',(122.901353,-127.023809,-3.5E-02)); +#255875 = LINE('',#255876,#255877); +#255876 = CARTESIAN_POINT('',(122.886421,-127.059857,-3.5E-02)); +#255877 = VECTOR('',#255878,1.); +#255878 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255879 = ORIENTED_EDGE('',*,*,#255880,.F.); +#255880 = EDGE_CURVE('',#255881,#255873,#255883,.T.); +#255881 = VERTEX_POINT('',#255882); +#255882 = CARTESIAN_POINT('',(122.901353,-127.023809,0.)); +#255883 = LINE('',#255884,#255885); +#255884 = CARTESIAN_POINT('',(122.901353,-127.023809,0.)); +#255885 = VECTOR('',#255886,1.); +#255886 = DIRECTION('',(0.,0.,-1.)); +#255887 = ORIENTED_EDGE('',*,*,#255888,.F.); +#255888 = EDGE_CURVE('',#255850,#255881,#255889,.T.); +#255889 = LINE('',#255890,#255891); +#255890 = CARTESIAN_POINT('',(122.886421,-127.059857,0.)); +#255891 = VECTOR('',#255892,1.); +#255892 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255893 = PLANE('',#255894); +#255894 = AXIS2_PLACEMENT_3D('',#255895,#255896,#255897); +#255895 = CARTESIAN_POINT('',(122.886421,-127.059857,0.)); +#255896 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#255897 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#255898 = ADVANCED_FACE('',(#255899),#255924,.F.); +#255899 = FACE_BOUND('',#255900,.F.); +#255900 = EDGE_LOOP('',(#255901,#255902,#255910,#255918)); +#255901 = ORIENTED_EDGE('',*,*,#255880,.T.); +#255902 = ORIENTED_EDGE('',*,*,#255903,.T.); +#255903 = EDGE_CURVE('',#255873,#255904,#255906,.T.); +#255904 = VERTEX_POINT('',#255905); +#255905 = CARTESIAN_POINT('',(125.388309,-124.536853,-3.5E-02)); +#255906 = LINE('',#255907,#255908); +#255907 = CARTESIAN_POINT('',(122.901353,-127.023809,-3.5E-02)); +#255908 = VECTOR('',#255909,1.); +#255909 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255910 = ORIENTED_EDGE('',*,*,#255911,.F.); +#255911 = EDGE_CURVE('',#255912,#255904,#255914,.T.); +#255912 = VERTEX_POINT('',#255913); +#255913 = CARTESIAN_POINT('',(125.388309,-124.536853,0.)); +#255914 = LINE('',#255915,#255916); +#255915 = CARTESIAN_POINT('',(125.388309,-124.536853,0.)); +#255916 = VECTOR('',#255917,1.); +#255917 = DIRECTION('',(0.,0.,-1.)); +#255918 = ORIENTED_EDGE('',*,*,#255919,.F.); +#255919 = EDGE_CURVE('',#255881,#255912,#255920,.T.); +#255920 = LINE('',#255921,#255922); +#255921 = CARTESIAN_POINT('',(122.901353,-127.023809,0.)); +#255922 = VECTOR('',#255923,1.); +#255923 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255924 = PLANE('',#255925); +#255925 = AXIS2_PLACEMENT_3D('',#255926,#255927,#255928); +#255926 = CARTESIAN_POINT('',(122.901353,-127.023809,0.)); +#255927 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#255928 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#255929 = ADVANCED_FACE('',(#255930),#255955,.F.); +#255930 = FACE_BOUND('',#255931,.F.); +#255931 = EDGE_LOOP('',(#255932,#255933,#255941,#255949)); +#255932 = ORIENTED_EDGE('',*,*,#255911,.T.); +#255933 = ORIENTED_EDGE('',*,*,#255934,.T.); +#255934 = EDGE_CURVE('',#255904,#255935,#255937,.T.); +#255935 = VERTEX_POINT('',#255936); +#255936 = CARTESIAN_POINT('',(125.424357,-124.521921,-3.5E-02)); +#255937 = LINE('',#255938,#255939); +#255938 = CARTESIAN_POINT('',(125.388309,-124.536853,-3.5E-02)); +#255939 = VECTOR('',#255940,1.); +#255940 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#255941 = ORIENTED_EDGE('',*,*,#255942,.F.); +#255942 = EDGE_CURVE('',#255943,#255935,#255945,.T.); +#255943 = VERTEX_POINT('',#255944); +#255944 = CARTESIAN_POINT('',(125.424357,-124.521921,0.)); +#255945 = LINE('',#255946,#255947); +#255946 = CARTESIAN_POINT('',(125.424357,-124.521921,0.)); +#255947 = VECTOR('',#255948,1.); +#255948 = DIRECTION('',(0.,0.,-1.)); +#255949 = ORIENTED_EDGE('',*,*,#255950,.F.); +#255950 = EDGE_CURVE('',#255912,#255943,#255951,.T.); +#255951 = LINE('',#255952,#255953); +#255952 = CARTESIAN_POINT('',(125.388309,-124.536853,0.)); +#255953 = VECTOR('',#255954,1.); +#255954 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#255955 = PLANE('',#255956); +#255956 = AXIS2_PLACEMENT_3D('',#255957,#255958,#255959); +#255957 = CARTESIAN_POINT('',(125.388309,-124.536853,0.)); +#255958 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#255959 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#255960 = ADVANCED_FACE('',(#255961),#255986,.F.); +#255961 = FACE_BOUND('',#255962,.F.); +#255962 = EDGE_LOOP('',(#255963,#255964,#255972,#255980)); +#255963 = ORIENTED_EDGE('',*,*,#255942,.T.); +#255964 = ORIENTED_EDGE('',*,*,#255965,.T.); +#255965 = EDGE_CURVE('',#255935,#255966,#255968,.T.); +#255966 = VERTEX_POINT('',#255967); +#255967 = CARTESIAN_POINT('',(138.738578,-124.52,-3.5E-02)); +#255968 = LINE('',#255969,#255970); +#255969 = CARTESIAN_POINT('',(125.424357,-124.521921,-3.5E-02)); +#255970 = VECTOR('',#255971,1.); +#255971 = DIRECTION('',(0.999999989591,1.442818156627E-04,0.)); +#255972 = ORIENTED_EDGE('',*,*,#255973,.F.); +#255973 = EDGE_CURVE('',#255974,#255966,#255976,.T.); +#255974 = VERTEX_POINT('',#255975); +#255975 = CARTESIAN_POINT('',(138.738578,-124.52,0.)); +#255976 = LINE('',#255977,#255978); +#255977 = CARTESIAN_POINT('',(138.738578,-124.52,0.)); +#255978 = VECTOR('',#255979,1.); +#255979 = DIRECTION('',(0.,0.,-1.)); +#255980 = ORIENTED_EDGE('',*,*,#255981,.F.); +#255981 = EDGE_CURVE('',#255943,#255974,#255982,.T.); +#255982 = LINE('',#255983,#255984); +#255983 = CARTESIAN_POINT('',(125.424357,-124.521921,0.)); +#255984 = VECTOR('',#255985,1.); +#255985 = DIRECTION('',(0.999999989591,1.442818156627E-04,0.)); +#255986 = PLANE('',#255987); +#255987 = AXIS2_PLACEMENT_3D('',#255988,#255989,#255990); +#255988 = CARTESIAN_POINT('',(125.424357,-124.521921,0.)); +#255989 = DIRECTION('',(1.442818156627E-04,-0.999999989591,0.)); +#255990 = DIRECTION('',(0.999999989591,1.442818156627E-04,0.)); +#255991 = ADVANCED_FACE('',(#255992),#256017,.F.); +#255992 = FACE_BOUND('',#255993,.F.); +#255993 = EDGE_LOOP('',(#255994,#255995,#256003,#256011)); +#255994 = ORIENTED_EDGE('',*,*,#255973,.T.); +#255995 = ORIENTED_EDGE('',*,*,#255996,.T.); +#255996 = EDGE_CURVE('',#255966,#255997,#255999,.T.); +#255997 = VERTEX_POINT('',#255998); +#255998 = CARTESIAN_POINT('',(139.398566,-123.860011,-3.5E-02)); +#255999 = LINE('',#256000,#256001); +#256000 = CARTESIAN_POINT('',(138.738578,-124.52,-3.5E-02)); +#256001 = VECTOR('',#256002,1.); +#256002 = DIRECTION('',(0.70710624549,0.707107316883,0.)); +#256003 = ORIENTED_EDGE('',*,*,#256004,.F.); +#256004 = EDGE_CURVE('',#256005,#255997,#256007,.T.); +#256005 = VERTEX_POINT('',#256006); +#256006 = CARTESIAN_POINT('',(139.398566,-123.860011,0.)); +#256007 = LINE('',#256008,#256009); +#256008 = CARTESIAN_POINT('',(139.398566,-123.860011,0.)); +#256009 = VECTOR('',#256010,1.); +#256010 = DIRECTION('',(0.,0.,-1.)); +#256011 = ORIENTED_EDGE('',*,*,#256012,.F.); +#256012 = EDGE_CURVE('',#255974,#256005,#256013,.T.); +#256013 = LINE('',#256014,#256015); +#256014 = CARTESIAN_POINT('',(138.738578,-124.52,0.)); +#256015 = VECTOR('',#256016,1.); +#256016 = DIRECTION('',(0.70710624549,0.707107316883,0.)); +#256017 = PLANE('',#256018); +#256018 = AXIS2_PLACEMENT_3D('',#256019,#256020,#256021); +#256019 = CARTESIAN_POINT('',(138.738578,-124.52,0.)); +#256020 = DIRECTION('',(0.707107316883,-0.70710624549,0.)); +#256021 = DIRECTION('',(0.70710624549,0.707107316883,0.)); +#256022 = ADVANCED_FACE('',(#256023),#256048,.F.); +#256023 = FACE_BOUND('',#256024,.F.); +#256024 = EDGE_LOOP('',(#256025,#256026,#256034,#256042)); +#256025 = ORIENTED_EDGE('',*,*,#256004,.T.); +#256026 = ORIENTED_EDGE('',*,*,#256027,.T.); +#256027 = EDGE_CURVE('',#255997,#256028,#256030,.T.); +#256028 = VERTEX_POINT('',#256029); +#256029 = CARTESIAN_POINT('',(139.390903,-123.846738,-3.5E-02)); +#256030 = LINE('',#256031,#256032); +#256031 = CARTESIAN_POINT('',(139.398566,-123.860011,-3.5E-02)); +#256032 = VECTOR('',#256033,1.); +#256033 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#256034 = ORIENTED_EDGE('',*,*,#256035,.F.); +#256035 = EDGE_CURVE('',#256036,#256028,#256038,.T.); +#256036 = VERTEX_POINT('',#256037); +#256037 = CARTESIAN_POINT('',(139.390903,-123.846738,0.)); +#256038 = LINE('',#256039,#256040); +#256039 = CARTESIAN_POINT('',(139.390903,-123.846738,0.)); +#256040 = VECTOR('',#256041,1.); +#256041 = DIRECTION('',(0.,0.,-1.)); +#256042 = ORIENTED_EDGE('',*,*,#256043,.F.); +#256043 = EDGE_CURVE('',#256005,#256036,#256044,.T.); +#256044 = LINE('',#256045,#256046); +#256045 = CARTESIAN_POINT('',(139.398566,-123.860011,0.)); +#256046 = VECTOR('',#256047,1.); +#256047 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#256048 = PLANE('',#256049); +#256049 = AXIS2_PLACEMENT_3D('',#256050,#256051,#256052); +#256050 = CARTESIAN_POINT('',(139.398566,-123.860011,0.)); +#256051 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#256052 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#256053 = ADVANCED_FACE('',(#256054),#256081,.T.); +#256054 = FACE_BOUND('',#256055,.F.); +#256055 = EDGE_LOOP('',(#256056,#256057,#256066,#256074)); +#256056 = ORIENTED_EDGE('',*,*,#256035,.T.); +#256057 = ORIENTED_EDGE('',*,*,#256058,.T.); +#256058 = EDGE_CURVE('',#256028,#256059,#256061,.T.); +#256059 = VERTEX_POINT('',#256060); +#256060 = CARTESIAN_POINT('',(139.553262,-124.009097,-3.5E-02)); +#256061 = CIRCLE('',#256062,0.300000118202); +#256062 = AXIS2_PLACEMENT_3D('',#256063,#256064,#256065); +#256063 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.5E-02)); +#256064 = DIRECTION('',(0.,0.,-1.)); +#256065 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#256066 = ORIENTED_EDGE('',*,*,#256067,.F.); +#256067 = EDGE_CURVE('',#256068,#256059,#256070,.T.); +#256068 = VERTEX_POINT('',#256069); +#256069 = CARTESIAN_POINT('',(139.553262,-124.009097,0.)); +#256070 = LINE('',#256071,#256072); +#256071 = CARTESIAN_POINT('',(139.553262,-124.009097,0.)); +#256072 = VECTOR('',#256073,1.); +#256073 = DIRECTION('',(0.,0.,-1.)); +#256074 = ORIENTED_EDGE('',*,*,#256075,.F.); +#256075 = EDGE_CURVE('',#256036,#256068,#256076,.T.); +#256076 = CIRCLE('',#256077,0.300000118202); +#256077 = AXIS2_PLACEMENT_3D('',#256078,#256079,#256080); +#256078 = CARTESIAN_POINT('',(139.668067,-123.731933,0.)); +#256079 = DIRECTION('',(0.,0.,-1.)); +#256080 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#256081 = CYLINDRICAL_SURFACE('',#256082,0.300000118202); +#256082 = AXIS2_PLACEMENT_3D('',#256083,#256084,#256085); +#256083 = CARTESIAN_POINT('',(139.668067,-123.731933,0.)); +#256084 = DIRECTION('',(-0.,-0.,1.)); +#256085 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#256086 = ADVANCED_FACE('',(#256087),#256103,.F.); +#256087 = FACE_BOUND('',#256088,.F.); +#256088 = EDGE_LOOP('',(#256089,#256090,#256096,#256097)); +#256089 = ORIENTED_EDGE('',*,*,#256067,.T.); +#256090 = ORIENTED_EDGE('',*,*,#256091,.T.); +#256091 = EDGE_CURVE('',#256059,#255398,#256092,.T.); +#256092 = LINE('',#256093,#256094); +#256093 = CARTESIAN_POINT('',(139.553262,-124.009097,-3.5E-02)); +#256094 = VECTOR('',#256095,1.); +#256095 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#256096 = ORIENTED_EDGE('',*,*,#255395,.F.); +#256097 = ORIENTED_EDGE('',*,*,#256098,.F.); +#256098 = EDGE_CURVE('',#256068,#255396,#256099,.T.); +#256099 = LINE('',#256100,#256101); +#256100 = CARTESIAN_POINT('',(139.553262,-124.009097,0.)); +#256101 = VECTOR('',#256102,1.); +#256102 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#256103 = PLANE('',#256104); +#256104 = AXIS2_PLACEMENT_3D('',#256105,#256106,#256107); +#256105 = CARTESIAN_POINT('',(139.553262,-124.009097,0.)); +#256106 = DIRECTION('',(0.500012356405,0.866018269693,0.)); +#256107 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#256108 = ADVANCED_FACE('',(#256109),#256136,.F.); +#256109 = FACE_BOUND('',#256110,.F.); +#256110 = EDGE_LOOP('',(#256111,#256121,#256128,#256129)); +#256111 = ORIENTED_EDGE('',*,*,#256112,.T.); +#256112 = EDGE_CURVE('',#256113,#256115,#256117,.T.); +#256113 = VERTEX_POINT('',#256114); +#256114 = CARTESIAN_POINT('',(128.137255,-140.2,0.)); +#256115 = VERTEX_POINT('',#256116); +#256116 = CARTESIAN_POINT('',(128.137255,-140.2,-3.5E-02)); +#256117 = LINE('',#256118,#256119); +#256118 = CARTESIAN_POINT('',(128.137255,-140.2,0.)); +#256119 = VECTOR('',#256120,1.); +#256120 = DIRECTION('',(0.,0.,-1.)); +#256121 = ORIENTED_EDGE('',*,*,#256122,.T.); +#256122 = EDGE_CURVE('',#256115,#256115,#256123,.T.); +#256123 = CIRCLE('',#256124,0.137255); +#256124 = AXIS2_PLACEMENT_3D('',#256125,#256126,#256127); +#256125 = CARTESIAN_POINT('',(128.,-140.2,-3.5E-02)); +#256126 = DIRECTION('',(0.,0.,1.)); +#256127 = DIRECTION('',(1.,0.,-0.)); +#256128 = ORIENTED_EDGE('',*,*,#256112,.F.); +#256129 = ORIENTED_EDGE('',*,*,#256130,.F.); +#256130 = EDGE_CURVE('',#256113,#256113,#256131,.T.); +#256131 = CIRCLE('',#256132,0.137255); +#256132 = AXIS2_PLACEMENT_3D('',#256133,#256134,#256135); +#256133 = CARTESIAN_POINT('',(128.,-140.2,0.)); +#256134 = DIRECTION('',(0.,0.,1.)); +#256135 = DIRECTION('',(1.,0.,-0.)); +#256136 = CYLINDRICAL_SURFACE('',#256137,0.137255); +#256137 = AXIS2_PLACEMENT_3D('',#256138,#256139,#256140); +#256138 = CARTESIAN_POINT('',(128.,-140.2,0.)); +#256139 = DIRECTION('',(0.,0.,1.)); +#256140 = DIRECTION('',(1.,0.,-0.)); +#256141 = ADVANCED_FACE('',(#256142),#256169,.F.); +#256142 = FACE_BOUND('',#256143,.F.); +#256143 = EDGE_LOOP('',(#256144,#256154,#256161,#256162)); +#256144 = ORIENTED_EDGE('',*,*,#256145,.T.); +#256145 = EDGE_CURVE('',#256146,#256148,#256150,.T.); +#256146 = VERTEX_POINT('',#256147); +#256147 = CARTESIAN_POINT('',(139.805322,-123.731933,0.)); +#256148 = VERTEX_POINT('',#256149); +#256149 = CARTESIAN_POINT('',(139.805322,-123.731933,-3.5E-02)); +#256150 = LINE('',#256151,#256152); +#256151 = CARTESIAN_POINT('',(139.805322,-123.731933,0.)); +#256152 = VECTOR('',#256153,1.); +#256153 = DIRECTION('',(0.,0.,-1.)); +#256154 = ORIENTED_EDGE('',*,*,#256155,.T.); +#256155 = EDGE_CURVE('',#256148,#256148,#256156,.T.); +#256156 = CIRCLE('',#256157,0.137255); +#256157 = AXIS2_PLACEMENT_3D('',#256158,#256159,#256160); +#256158 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.5E-02)); +#256159 = DIRECTION('',(0.,0.,1.)); +#256160 = DIRECTION('',(1.,0.,-0.)); +#256161 = ORIENTED_EDGE('',*,*,#256145,.F.); +#256162 = ORIENTED_EDGE('',*,*,#256163,.F.); +#256163 = EDGE_CURVE('',#256146,#256146,#256164,.T.); +#256164 = CIRCLE('',#256165,0.137255); +#256165 = AXIS2_PLACEMENT_3D('',#256166,#256167,#256168); +#256166 = CARTESIAN_POINT('',(139.668067,-123.731933,0.)); +#256167 = DIRECTION('',(0.,0.,1.)); +#256168 = DIRECTION('',(1.,0.,-0.)); +#256169 = CYLINDRICAL_SURFACE('',#256170,0.137255); +#256170 = AXIS2_PLACEMENT_3D('',#256171,#256172,#256173); +#256171 = CARTESIAN_POINT('',(139.668067,-123.731933,0.)); +#256172 = DIRECTION('',(0.,0.,1.)); +#256173 = DIRECTION('',(1.,0.,-0.)); +#256174 = ADVANCED_FACE('',(#256175,#256200,#256203),#256206,.F.); +#256175 = FACE_BOUND('',#256176,.F.); +#256176 = EDGE_LOOP('',(#256177,#256178,#256179,#256180,#256181,#256182, + #256183,#256184,#256185,#256186,#256187,#256188,#256189,#256190, + #256191,#256192,#256193,#256194,#256195,#256196,#256197,#256198, + #256199)); +#256177 = ORIENTED_EDGE('',*,*,#255421,.T.); +#256178 = ORIENTED_EDGE('',*,*,#255452,.T.); +#256179 = ORIENTED_EDGE('',*,*,#255483,.T.); +#256180 = ORIENTED_EDGE('',*,*,#255514,.T.); +#256181 = ORIENTED_EDGE('',*,*,#255545,.T.); +#256182 = ORIENTED_EDGE('',*,*,#255576,.T.); +#256183 = ORIENTED_EDGE('',*,*,#255607,.T.); +#256184 = ORIENTED_EDGE('',*,*,#255638,.T.); +#256185 = ORIENTED_EDGE('',*,*,#255669,.T.); +#256186 = ORIENTED_EDGE('',*,*,#255701,.T.); +#256187 = ORIENTED_EDGE('',*,*,#255733,.T.); +#256188 = ORIENTED_EDGE('',*,*,#255764,.T.); +#256189 = ORIENTED_EDGE('',*,*,#255795,.T.); +#256190 = ORIENTED_EDGE('',*,*,#255826,.T.); +#256191 = ORIENTED_EDGE('',*,*,#255857,.T.); +#256192 = ORIENTED_EDGE('',*,*,#255888,.T.); +#256193 = ORIENTED_EDGE('',*,*,#255919,.T.); +#256194 = ORIENTED_EDGE('',*,*,#255950,.T.); +#256195 = ORIENTED_EDGE('',*,*,#255981,.T.); +#256196 = ORIENTED_EDGE('',*,*,#256012,.T.); +#256197 = ORIENTED_EDGE('',*,*,#256043,.T.); +#256198 = ORIENTED_EDGE('',*,*,#256075,.T.); +#256199 = ORIENTED_EDGE('',*,*,#256098,.T.); +#256200 = FACE_BOUND('',#256201,.F.); +#256201 = EDGE_LOOP('',(#256202)); +#256202 = ORIENTED_EDGE('',*,*,#256130,.T.); +#256203 = FACE_BOUND('',#256204,.F.); +#256204 = EDGE_LOOP('',(#256205)); +#256205 = ORIENTED_EDGE('',*,*,#256163,.T.); +#256206 = PLANE('',#256207); +#256207 = AXIS2_PLACEMENT_3D('',#256208,#256209,#256210); +#256208 = CARTESIAN_POINT('',(0.,0.,0.)); +#256209 = DIRECTION('',(-0.,-0.,-1.)); +#256210 = DIRECTION('',(-1.,0.,0.)); +#256211 = ADVANCED_FACE('',(#256212,#256237,#256240),#256243,.T.); +#256212 = FACE_BOUND('',#256213,.T.); +#256213 = EDGE_LOOP('',(#256214,#256215,#256216,#256217,#256218,#256219, + #256220,#256221,#256222,#256223,#256224,#256225,#256226,#256227, + #256228,#256229,#256230,#256231,#256232,#256233,#256234,#256235, + #256236)); +#256214 = ORIENTED_EDGE('',*,*,#255405,.T.); +#256215 = ORIENTED_EDGE('',*,*,#255436,.T.); +#256216 = ORIENTED_EDGE('',*,*,#255467,.T.); +#256217 = ORIENTED_EDGE('',*,*,#255498,.T.); +#256218 = ORIENTED_EDGE('',*,*,#255529,.T.); +#256219 = ORIENTED_EDGE('',*,*,#255560,.T.); +#256220 = ORIENTED_EDGE('',*,*,#255591,.T.); +#256221 = ORIENTED_EDGE('',*,*,#255622,.T.); +#256222 = ORIENTED_EDGE('',*,*,#255653,.T.); +#256223 = ORIENTED_EDGE('',*,*,#255684,.T.); +#256224 = ORIENTED_EDGE('',*,*,#255717,.T.); +#256225 = ORIENTED_EDGE('',*,*,#255748,.T.); +#256226 = ORIENTED_EDGE('',*,*,#255779,.T.); +#256227 = ORIENTED_EDGE('',*,*,#255810,.T.); +#256228 = ORIENTED_EDGE('',*,*,#255841,.T.); +#256229 = ORIENTED_EDGE('',*,*,#255872,.T.); +#256230 = ORIENTED_EDGE('',*,*,#255903,.T.); +#256231 = ORIENTED_EDGE('',*,*,#255934,.T.); +#256232 = ORIENTED_EDGE('',*,*,#255965,.T.); +#256233 = ORIENTED_EDGE('',*,*,#255996,.T.); +#256234 = ORIENTED_EDGE('',*,*,#256027,.T.); +#256235 = ORIENTED_EDGE('',*,*,#256058,.T.); +#256236 = ORIENTED_EDGE('',*,*,#256091,.T.); +#256237 = FACE_BOUND('',#256238,.T.); +#256238 = EDGE_LOOP('',(#256239)); +#256239 = ORIENTED_EDGE('',*,*,#256122,.T.); +#256240 = FACE_BOUND('',#256241,.T.); +#256241 = EDGE_LOOP('',(#256242)); +#256242 = ORIENTED_EDGE('',*,*,#256155,.T.); +#256243 = PLANE('',#256244); +#256244 = AXIS2_PLACEMENT_3D('',#256245,#256246,#256247); +#256245 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#256246 = DIRECTION('',(-0.,-0.,-1.)); +#256247 = DIRECTION('',(-1.,0.,0.)); +#256248 = MANIFOLD_SOLID_BREP('',#256249); +#256249 = CLOSED_SHELL('',(#256250,#256290,#256321,#256354,#256385, + #256416,#256447,#256478,#256511,#256533,#256566,#256586)); +#256250 = ADVANCED_FACE('',(#256251),#256285,.T.); +#256251 = FACE_BOUND('',#256252,.T.); +#256252 = EDGE_LOOP('',(#256253,#256263,#256271,#256279)); +#256253 = ORIENTED_EDGE('',*,*,#256254,.T.); +#256254 = EDGE_CURVE('',#256255,#256257,#256259,.T.); +#256255 = VERTEX_POINT('',#256256); +#256256 = CARTESIAN_POINT('',(134.8,-145.78113,1.51)); +#256257 = VERTEX_POINT('',#256258); +#256258 = CARTESIAN_POINT('',(134.8,-145.78113,1.545)); +#256259 = LINE('',#256260,#256261); +#256260 = CARTESIAN_POINT('',(134.8,-145.78113,1.51)); +#256261 = VECTOR('',#256262,1.); +#256262 = DIRECTION('',(0.,0.,1.)); +#256263 = ORIENTED_EDGE('',*,*,#256264,.T.); +#256264 = EDGE_CURVE('',#256257,#256265,#256267,.T.); +#256265 = VERTEX_POINT('',#256266); +#256266 = CARTESIAN_POINT('',(134.8,-148.158578,1.545)); +#256267 = LINE('',#256268,#256269); +#256268 = CARTESIAN_POINT('',(134.8,-145.78113,1.545)); +#256269 = VECTOR('',#256270,1.); +#256270 = DIRECTION('',(0.,-1.,0.)); +#256271 = ORIENTED_EDGE('',*,*,#256272,.F.); +#256272 = EDGE_CURVE('',#256273,#256265,#256275,.T.); +#256273 = VERTEX_POINT('',#256274); +#256274 = CARTESIAN_POINT('',(134.8,-148.158578,1.51)); +#256275 = LINE('',#256276,#256277); +#256276 = CARTESIAN_POINT('',(134.8,-148.158578,1.51)); +#256277 = VECTOR('',#256278,1.); +#256278 = DIRECTION('',(0.,0.,1.)); +#256279 = ORIENTED_EDGE('',*,*,#256280,.F.); +#256280 = EDGE_CURVE('',#256255,#256273,#256281,.T.); +#256281 = LINE('',#256282,#256283); +#256282 = CARTESIAN_POINT('',(134.8,-145.78113,1.51)); +#256283 = VECTOR('',#256284,1.); +#256284 = DIRECTION('',(0.,-1.,0.)); +#256285 = PLANE('',#256286); +#256286 = AXIS2_PLACEMENT_3D('',#256287,#256288,#256289); +#256287 = CARTESIAN_POINT('',(134.8,-145.78113,1.51)); +#256288 = DIRECTION('',(1.,0.,-0.)); +#256289 = DIRECTION('',(0.,-1.,0.)); +#256290 = ADVANCED_FACE('',(#256291),#256316,.T.); +#256291 = FACE_BOUND('',#256292,.T.); +#256292 = EDGE_LOOP('',(#256293,#256294,#256302,#256310)); +#256293 = ORIENTED_EDGE('',*,*,#256272,.T.); +#256294 = ORIENTED_EDGE('',*,*,#256295,.T.); +#256295 = EDGE_CURVE('',#256265,#256296,#256298,.T.); +#256296 = VERTEX_POINT('',#256297); +#256297 = CARTESIAN_POINT('',(135.763651,-149.12427,1.545)); +#256298 = LINE('',#256299,#256300); +#256299 = CARTESIAN_POINT('',(134.8,-148.158578,1.545)); +#256300 = VECTOR('',#256301,1.); +#256301 = DIRECTION('',(0.706358356725,-0.707854414329,0.)); +#256302 = ORIENTED_EDGE('',*,*,#256303,.F.); +#256303 = EDGE_CURVE('',#256304,#256296,#256306,.T.); +#256304 = VERTEX_POINT('',#256305); +#256305 = CARTESIAN_POINT('',(135.763651,-149.12427,1.51)); +#256306 = LINE('',#256307,#256308); +#256307 = CARTESIAN_POINT('',(135.763651,-149.12427,1.51)); +#256308 = VECTOR('',#256309,1.); +#256309 = DIRECTION('',(0.,0.,1.)); +#256310 = ORIENTED_EDGE('',*,*,#256311,.F.); +#256311 = EDGE_CURVE('',#256273,#256304,#256312,.T.); +#256312 = LINE('',#256313,#256314); +#256313 = CARTESIAN_POINT('',(134.8,-148.158578,1.51)); +#256314 = VECTOR('',#256315,1.); +#256315 = DIRECTION('',(0.706358356725,-0.707854414329,0.)); +#256316 = PLANE('',#256317); +#256317 = AXIS2_PLACEMENT_3D('',#256318,#256319,#256320); +#256318 = CARTESIAN_POINT('',(134.8,-148.158578,1.51)); +#256319 = DIRECTION('',(0.707854414329,0.706358356725,-0.)); +#256320 = DIRECTION('',(0.706358356725,-0.707854414329,0.)); +#256321 = ADVANCED_FACE('',(#256322),#256349,.F.); +#256322 = FACE_BOUND('',#256323,.T.); +#256323 = EDGE_LOOP('',(#256324,#256325,#256334,#256342)); +#256324 = ORIENTED_EDGE('',*,*,#256303,.T.); +#256325 = ORIENTED_EDGE('',*,*,#256326,.T.); +#256326 = EDGE_CURVE('',#256296,#256327,#256329,.T.); +#256327 = VERTEX_POINT('',#256328); +#256328 = CARTESIAN_POINT('',(135.624517,-149.263222,1.545)); +#256329 = CIRCLE('',#256330,0.303742612892); +#256330 = AXIS2_PLACEMENT_3D('',#256331,#256332,#256333); +#256331 = CARTESIAN_POINT('',(135.89716647442,-149.3970944728,1.545)); +#256332 = DIRECTION('',(0.,0.,1.)); +#256333 = DIRECTION('',(-0.439567807607,0.898209409055,0.)); +#256334 = ORIENTED_EDGE('',*,*,#256335,.F.); +#256335 = EDGE_CURVE('',#256336,#256327,#256338,.T.); +#256336 = VERTEX_POINT('',#256337); +#256337 = CARTESIAN_POINT('',(135.624517,-149.263222,1.51)); +#256338 = LINE('',#256339,#256340); +#256339 = CARTESIAN_POINT('',(135.624517,-149.263222,1.51)); +#256340 = VECTOR('',#256341,1.); +#256341 = DIRECTION('',(0.,0.,1.)); +#256342 = ORIENTED_EDGE('',*,*,#256343,.F.); +#256343 = EDGE_CURVE('',#256304,#256336,#256344,.T.); +#256344 = CIRCLE('',#256345,0.303742612892); +#256345 = AXIS2_PLACEMENT_3D('',#256346,#256347,#256348); +#256346 = CARTESIAN_POINT('',(135.89716647442,-149.3970944728,1.51)); +#256347 = DIRECTION('',(0.,0.,1.)); +#256348 = DIRECTION('',(-0.439567807607,0.898209409055,0.)); +#256349 = CYLINDRICAL_SURFACE('',#256350,0.303742612892); +#256350 = AXIS2_PLACEMENT_3D('',#256351,#256352,#256353); +#256351 = CARTESIAN_POINT('',(135.89716647442,-149.3970944728,1.51)); +#256352 = DIRECTION('',(-0.,-0.,-1.)); +#256353 = DIRECTION('',(-0.439567807607,0.898209409055,0.)); +#256354 = ADVANCED_FACE('',(#256355),#256380,.T.); +#256355 = FACE_BOUND('',#256356,.T.); +#256356 = EDGE_LOOP('',(#256357,#256358,#256366,#256374)); +#256357 = ORIENTED_EDGE('',*,*,#256335,.T.); +#256358 = ORIENTED_EDGE('',*,*,#256359,.T.); +#256359 = EDGE_CURVE('',#256327,#256360,#256362,.T.); +#256360 = VERTEX_POINT('',#256361); +#256361 = CARTESIAN_POINT('',(134.616853,-148.255557,1.545)); +#256362 = LINE('',#256363,#256364); +#256363 = CARTESIAN_POINT('',(135.624517,-149.263222,1.545)); +#256364 = VECTOR('',#256365,1.); +#256365 = DIRECTION('',(-0.707106430322,0.707107132051,0.)); +#256366 = ORIENTED_EDGE('',*,*,#256367,.F.); +#256367 = EDGE_CURVE('',#256368,#256360,#256370,.T.); +#256368 = VERTEX_POINT('',#256369); +#256369 = CARTESIAN_POINT('',(134.616853,-148.255557,1.51)); +#256370 = LINE('',#256371,#256372); +#256371 = CARTESIAN_POINT('',(134.616853,-148.255557,1.51)); +#256372 = VECTOR('',#256373,1.); +#256373 = DIRECTION('',(0.,0.,1.)); +#256374 = ORIENTED_EDGE('',*,*,#256375,.F.); +#256375 = EDGE_CURVE('',#256336,#256368,#256376,.T.); +#256376 = LINE('',#256377,#256378); +#256377 = CARTESIAN_POINT('',(135.624517,-149.263222,1.51)); +#256378 = VECTOR('',#256379,1.); +#256379 = DIRECTION('',(-0.707106430322,0.707107132051,0.)); +#256380 = PLANE('',#256381); +#256381 = AXIS2_PLACEMENT_3D('',#256382,#256383,#256384); +#256382 = CARTESIAN_POINT('',(135.624517,-149.263222,1.51)); +#256383 = DIRECTION('',(-0.707107132051,-0.707106430322,0.)); +#256384 = DIRECTION('',(-0.707106430322,0.707107132051,0.)); +#256385 = ADVANCED_FACE('',(#256386),#256411,.T.); +#256386 = FACE_BOUND('',#256387,.T.); +#256387 = EDGE_LOOP('',(#256388,#256389,#256397,#256405)); +#256388 = ORIENTED_EDGE('',*,*,#256367,.T.); +#256389 = ORIENTED_EDGE('',*,*,#256390,.T.); +#256390 = EDGE_CURVE('',#256360,#256391,#256393,.T.); +#256391 = VERTEX_POINT('',#256392); +#256392 = CARTESIAN_POINT('',(134.601921,-148.219509,1.545)); +#256393 = LINE('',#256394,#256395); +#256394 = CARTESIAN_POINT('',(134.616853,-148.255557,1.545)); +#256395 = VECTOR('',#256396,1.); +#256396 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#256397 = ORIENTED_EDGE('',*,*,#256398,.F.); +#256398 = EDGE_CURVE('',#256399,#256391,#256401,.T.); +#256399 = VERTEX_POINT('',#256400); +#256400 = CARTESIAN_POINT('',(134.601921,-148.219509,1.51)); +#256401 = LINE('',#256402,#256403); +#256402 = CARTESIAN_POINT('',(134.601921,-148.219509,1.51)); +#256403 = VECTOR('',#256404,1.); +#256404 = DIRECTION('',(0.,0.,1.)); +#256405 = ORIENTED_EDGE('',*,*,#256406,.F.); +#256406 = EDGE_CURVE('',#256368,#256399,#256407,.T.); +#256407 = LINE('',#256408,#256409); +#256408 = CARTESIAN_POINT('',(134.616853,-148.255557,1.51)); +#256409 = VECTOR('',#256410,1.); +#256410 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#256411 = PLANE('',#256412); +#256412 = AXIS2_PLACEMENT_3D('',#256413,#256414,#256415); +#256413 = CARTESIAN_POINT('',(134.616853,-148.255557,1.51)); +#256414 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#256415 = DIRECTION('',(-0.382692828059,0.923875640631,0.)); +#256416 = ADVANCED_FACE('',(#256417),#256442,.T.); +#256417 = FACE_BOUND('',#256418,.T.); +#256418 = EDGE_LOOP('',(#256419,#256420,#256428,#256436)); +#256419 = ORIENTED_EDGE('',*,*,#256398,.T.); +#256420 = ORIENTED_EDGE('',*,*,#256421,.T.); +#256421 = EDGE_CURVE('',#256391,#256422,#256424,.T.); +#256422 = VERTEX_POINT('',#256423); +#256423 = CARTESIAN_POINT('',(134.6,-145.78113,1.545)); +#256424 = LINE('',#256425,#256426); +#256425 = CARTESIAN_POINT('',(134.601921,-148.219509,1.545)); +#256426 = VECTOR('',#256427,1.); +#256427 = DIRECTION('',(-7.878182201653E-04,0.999999689671,0.)); +#256428 = ORIENTED_EDGE('',*,*,#256429,.F.); +#256429 = EDGE_CURVE('',#256430,#256422,#256432,.T.); +#256430 = VERTEX_POINT('',#256431); +#256431 = CARTESIAN_POINT('',(134.6,-145.78113,1.51)); +#256432 = LINE('',#256433,#256434); +#256433 = CARTESIAN_POINT('',(134.6,-145.78113,1.51)); +#256434 = VECTOR('',#256435,1.); +#256435 = DIRECTION('',(0.,0.,1.)); +#256436 = ORIENTED_EDGE('',*,*,#256437,.F.); +#256437 = EDGE_CURVE('',#256399,#256430,#256438,.T.); +#256438 = LINE('',#256439,#256440); +#256439 = CARTESIAN_POINT('',(134.601921,-148.219509,1.51)); +#256440 = VECTOR('',#256441,1.); +#256441 = DIRECTION('',(-7.878182201653E-04,0.999999689671,0.)); +#256442 = PLANE('',#256443); +#256443 = AXIS2_PLACEMENT_3D('',#256444,#256445,#256446); +#256444 = CARTESIAN_POINT('',(134.601921,-148.219509,1.51)); +#256445 = DIRECTION('',(-0.999999689671,-7.878182201653E-04,0.)); +#256446 = DIRECTION('',(-7.878182201653E-04,0.999999689671,0.)); +#256447 = ADVANCED_FACE('',(#256448),#256473,.T.); +#256448 = FACE_BOUND('',#256449,.T.); +#256449 = EDGE_LOOP('',(#256450,#256451,#256459,#256467)); +#256450 = ORIENTED_EDGE('',*,*,#256429,.T.); +#256451 = ORIENTED_EDGE('',*,*,#256452,.T.); +#256452 = EDGE_CURVE('',#256422,#256453,#256455,.T.); +#256453 = VERTEX_POINT('',#256454); +#256454 = CARTESIAN_POINT('',(134.585195,-145.777164,1.545)); +#256455 = LINE('',#256456,#256457); +#256456 = CARTESIAN_POINT('',(134.6,-145.78113,1.545)); +#256457 = VECTOR('',#256458,1.); +#256458 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#256459 = ORIENTED_EDGE('',*,*,#256460,.F.); +#256460 = EDGE_CURVE('',#256461,#256453,#256463,.T.); +#256461 = VERTEX_POINT('',#256462); +#256462 = CARTESIAN_POINT('',(134.585195,-145.777164,1.51)); +#256463 = LINE('',#256464,#256465); +#256464 = CARTESIAN_POINT('',(134.585195,-145.777164,1.51)); +#256465 = VECTOR('',#256466,1.); +#256466 = DIRECTION('',(0.,0.,1.)); +#256467 = ORIENTED_EDGE('',*,*,#256468,.F.); +#256468 = EDGE_CURVE('',#256430,#256461,#256469,.T.); +#256469 = LINE('',#256470,#256471); +#256470 = CARTESIAN_POINT('',(134.6,-145.78113,1.51)); +#256471 = VECTOR('',#256472,1.); +#256472 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#256473 = PLANE('',#256474); +#256474 = AXIS2_PLACEMENT_3D('',#256475,#256476,#256477); +#256475 = CARTESIAN_POINT('',(134.6,-145.78113,1.51)); +#256476 = DIRECTION('',(-0.258758913864,-0.9659419364,0.)); +#256477 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#256478 = ADVANCED_FACE('',(#256479),#256506,.T.); +#256479 = FACE_BOUND('',#256480,.T.); +#256480 = EDGE_LOOP('',(#256481,#256482,#256491,#256499)); +#256481 = ORIENTED_EDGE('',*,*,#256460,.T.); +#256482 = ORIENTED_EDGE('',*,*,#256483,.T.); +#256483 = EDGE_CURVE('',#256453,#256484,#256486,.T.); +#256484 = VERTEX_POINT('',#256485); +#256485 = CARTESIAN_POINT('',(134.814805,-145.777164,1.545)); +#256486 = CIRCLE('',#256487,0.299999472923); +#256487 = AXIS2_PLACEMENT_3D('',#256488,#256489,#256490); +#256488 = CARTESIAN_POINT('',(134.7,-145.5000006984,1.545)); +#256489 = DIRECTION('',(0.,0.,-1.)); +#256490 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#256491 = ORIENTED_EDGE('',*,*,#256492,.F.); +#256492 = EDGE_CURVE('',#256493,#256484,#256495,.T.); +#256493 = VERTEX_POINT('',#256494); +#256494 = CARTESIAN_POINT('',(134.814805,-145.777164,1.51)); +#256495 = LINE('',#256496,#256497); +#256496 = CARTESIAN_POINT('',(134.814805,-145.777164,1.51)); +#256497 = VECTOR('',#256498,1.); +#256498 = DIRECTION('',(0.,0.,1.)); +#256499 = ORIENTED_EDGE('',*,*,#256500,.F.); +#256500 = EDGE_CURVE('',#256461,#256493,#256501,.T.); +#256501 = CIRCLE('',#256502,0.299999472923); +#256502 = AXIS2_PLACEMENT_3D('',#256503,#256504,#256505); +#256503 = CARTESIAN_POINT('',(134.7,-145.5000006984,1.51)); +#256504 = DIRECTION('',(0.,0.,-1.)); +#256505 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#256506 = CYLINDRICAL_SURFACE('',#256507,0.299999472923); +#256507 = AXIS2_PLACEMENT_3D('',#256508,#256509,#256510); +#256508 = CARTESIAN_POINT('',(134.7,-145.5000006984,1.51)); +#256509 = DIRECTION('',(0.,0.,-1.)); +#256510 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#256511 = ADVANCED_FACE('',(#256512),#256528,.T.); +#256512 = FACE_BOUND('',#256513,.T.); +#256513 = EDGE_LOOP('',(#256514,#256515,#256521,#256522)); +#256514 = ORIENTED_EDGE('',*,*,#256492,.T.); +#256515 = ORIENTED_EDGE('',*,*,#256516,.T.); +#256516 = EDGE_CURVE('',#256484,#256257,#256517,.T.); +#256517 = LINE('',#256518,#256519); +#256518 = CARTESIAN_POINT('',(134.814805,-145.777164,1.545)); +#256519 = VECTOR('',#256520,1.); +#256520 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#256521 = ORIENTED_EDGE('',*,*,#256254,.F.); +#256522 = ORIENTED_EDGE('',*,*,#256523,.F.); +#256523 = EDGE_CURVE('',#256493,#256255,#256524,.T.); +#256524 = LINE('',#256525,#256526); +#256525 = CARTESIAN_POINT('',(134.814805,-145.777164,1.51)); +#256526 = VECTOR('',#256527,1.); +#256527 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#256528 = PLANE('',#256529); +#256529 = AXIS2_PLACEMENT_3D('',#256530,#256531,#256532); +#256530 = CARTESIAN_POINT('',(134.814805,-145.777164,1.51)); +#256531 = DIRECTION('',(0.258758913864,-0.9659419364,0.)); +#256532 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#256533 = ADVANCED_FACE('',(#256534),#256561,.F.); +#256534 = FACE_BOUND('',#256535,.T.); +#256535 = EDGE_LOOP('',(#256536,#256546,#256553,#256554)); +#256536 = ORIENTED_EDGE('',*,*,#256537,.T.); +#256537 = EDGE_CURVE('',#256538,#256540,#256542,.T.); +#256538 = VERTEX_POINT('',#256539); +#256539 = CARTESIAN_POINT('',(134.837255,-145.5,1.51)); +#256540 = VERTEX_POINT('',#256541); +#256541 = CARTESIAN_POINT('',(134.837255,-145.5,1.545)); +#256542 = LINE('',#256543,#256544); +#256543 = CARTESIAN_POINT('',(134.837255,-145.5,1.51)); +#256544 = VECTOR('',#256545,1.); +#256545 = DIRECTION('',(0.,0.,1.)); +#256546 = ORIENTED_EDGE('',*,*,#256547,.T.); +#256547 = EDGE_CURVE('',#256540,#256540,#256548,.T.); +#256548 = CIRCLE('',#256549,0.137255); +#256549 = AXIS2_PLACEMENT_3D('',#256550,#256551,#256552); +#256550 = CARTESIAN_POINT('',(134.7,-145.5,1.545)); +#256551 = DIRECTION('',(0.,0.,1.)); +#256552 = DIRECTION('',(1.,0.,-0.)); +#256553 = ORIENTED_EDGE('',*,*,#256537,.F.); +#256554 = ORIENTED_EDGE('',*,*,#256555,.F.); +#256555 = EDGE_CURVE('',#256538,#256538,#256556,.T.); +#256556 = CIRCLE('',#256557,0.137255); +#256557 = AXIS2_PLACEMENT_3D('',#256558,#256559,#256560); +#256558 = CARTESIAN_POINT('',(134.7,-145.5,1.51)); +#256559 = DIRECTION('',(0.,0.,1.)); +#256560 = DIRECTION('',(1.,0.,-0.)); +#256561 = CYLINDRICAL_SURFACE('',#256562,0.137255); +#256562 = AXIS2_PLACEMENT_3D('',#256563,#256564,#256565); +#256563 = CARTESIAN_POINT('',(134.7,-145.5,1.51)); +#256564 = DIRECTION('',(-0.,-0.,-1.)); +#256565 = DIRECTION('',(1.,0.,-0.)); +#256566 = ADVANCED_FACE('',(#256567,#256578),#256581,.F.); +#256567 = FACE_BOUND('',#256568,.T.); +#256568 = EDGE_LOOP('',(#256569,#256570,#256571,#256572,#256573,#256574, + #256575,#256576,#256577)); +#256569 = ORIENTED_EDGE('',*,*,#256280,.T.); +#256570 = ORIENTED_EDGE('',*,*,#256311,.T.); +#256571 = ORIENTED_EDGE('',*,*,#256343,.T.); +#256572 = ORIENTED_EDGE('',*,*,#256375,.T.); +#256573 = ORIENTED_EDGE('',*,*,#256406,.T.); +#256574 = ORIENTED_EDGE('',*,*,#256437,.T.); +#256575 = ORIENTED_EDGE('',*,*,#256468,.T.); +#256576 = ORIENTED_EDGE('',*,*,#256500,.T.); +#256577 = ORIENTED_EDGE('',*,*,#256523,.T.); +#256578 = FACE_BOUND('',#256579,.T.); +#256579 = EDGE_LOOP('',(#256580)); +#256580 = ORIENTED_EDGE('',*,*,#256555,.T.); +#256581 = PLANE('',#256582); +#256582 = AXIS2_PLACEMENT_3D('',#256583,#256584,#256585); +#256583 = CARTESIAN_POINT('',(0.,0.,1.51)); +#256584 = DIRECTION('',(0.,0.,1.)); +#256585 = DIRECTION('',(1.,0.,-0.)); +#256586 = ADVANCED_FACE('',(#256587,#256598),#256601,.T.); +#256587 = FACE_BOUND('',#256588,.F.); +#256588 = EDGE_LOOP('',(#256589,#256590,#256591,#256592,#256593,#256594, + #256595,#256596,#256597)); +#256589 = ORIENTED_EDGE('',*,*,#256264,.T.); +#256590 = ORIENTED_EDGE('',*,*,#256295,.T.); +#256591 = ORIENTED_EDGE('',*,*,#256326,.T.); +#256592 = ORIENTED_EDGE('',*,*,#256359,.T.); +#256593 = ORIENTED_EDGE('',*,*,#256390,.T.); +#256594 = ORIENTED_EDGE('',*,*,#256421,.T.); +#256595 = ORIENTED_EDGE('',*,*,#256452,.T.); +#256596 = ORIENTED_EDGE('',*,*,#256483,.T.); +#256597 = ORIENTED_EDGE('',*,*,#256516,.T.); +#256598 = FACE_BOUND('',#256599,.F.); +#256599 = EDGE_LOOP('',(#256600)); +#256600 = ORIENTED_EDGE('',*,*,#256547,.T.); +#256601 = PLANE('',#256602); +#256602 = AXIS2_PLACEMENT_3D('',#256603,#256604,#256605); +#256603 = CARTESIAN_POINT('',(0.,0.,1.545)); +#256604 = DIRECTION('',(0.,0.,1.)); +#256605 = DIRECTION('',(1.,0.,-0.)); +#256606 = MANIFOLD_SOLID_BREP('',#256607); +#256607 = CLOSED_SHELL('',(#256608,#256650,#256681,#256712,#256743, + #256774,#256805,#256836,#256867,#256898,#256929,#256960,#256991, + #257022,#257053,#257084,#257115,#257146,#257177,#257208,#257239, + #257272,#257303,#257334,#257365,#257396,#257427,#257458,#257489, + #257522,#257553,#257584,#257615,#257646,#257677,#257708,#257739, + #257770,#257801,#257832,#257863,#257894,#257916,#257949,#258002)); +#256608 = ADVANCED_FACE('',(#256609),#256645,.T.); +#256609 = FACE_BOUND('',#256610,.T.); +#256610 = EDGE_LOOP('',(#256611,#256621,#256630,#256638)); +#256611 = ORIENTED_EDGE('',*,*,#256612,.T.); +#256612 = EDGE_CURVE('',#256613,#256615,#256617,.T.); +#256613 = VERTEX_POINT('',#256614); +#256614 = CARTESIAN_POINT('',(138.579443,-82.326853,1.51)); +#256615 = VERTEX_POINT('',#256616); +#256616 = CARTESIAN_POINT('',(138.579443,-82.326853,1.545)); +#256617 = LINE('',#256618,#256619); +#256618 = CARTESIAN_POINT('',(138.579443,-82.326853,1.51)); +#256619 = VECTOR('',#256620,1.); +#256620 = DIRECTION('',(0.,0.,1.)); +#256621 = ORIENTED_EDGE('',*,*,#256622,.T.); +#256622 = EDGE_CURVE('',#256615,#256623,#256625,.T.); +#256623 = VERTEX_POINT('',#256624); +#256624 = CARTESIAN_POINT('',(138.733079,-82.390491,1.545)); +#256625 = CIRCLE('',#256626,0.100000590676); +#256626 = AXIS2_PLACEMENT_3D('',#256627,#256628,#256629); +#256627 = CARTESIAN_POINT('',(138.635,-82.41000068719,1.545)); +#256628 = DIRECTION('',(0.,0.,-1.)); +#256629 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#256630 = ORIENTED_EDGE('',*,*,#256631,.F.); +#256631 = EDGE_CURVE('',#256632,#256623,#256634,.T.); +#256632 = VERTEX_POINT('',#256633); +#256633 = CARTESIAN_POINT('',(138.733079,-82.390491,1.51)); +#256634 = LINE('',#256635,#256636); +#256635 = CARTESIAN_POINT('',(138.733079,-82.390491,1.51)); +#256636 = VECTOR('',#256637,1.); +#256637 = DIRECTION('',(0.,0.,1.)); +#256638 = ORIENTED_EDGE('',*,*,#256639,.F.); +#256639 = EDGE_CURVE('',#256613,#256632,#256640,.T.); +#256640 = CIRCLE('',#256641,0.100000590676); +#256641 = AXIS2_PLACEMENT_3D('',#256642,#256643,#256644); +#256642 = CARTESIAN_POINT('',(138.635,-82.41000068719,1.51)); +#256643 = DIRECTION('',(0.,0.,-1.)); +#256644 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#256645 = CYLINDRICAL_SURFACE('',#256646,0.100000590676); +#256646 = AXIS2_PLACEMENT_3D('',#256647,#256648,#256649); +#256647 = CARTESIAN_POINT('',(138.635,-82.41000068719,1.51)); +#256648 = DIRECTION('',(0.,0.,-1.)); +#256649 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#256650 = ADVANCED_FACE('',(#256651),#256676,.T.); +#256651 = FACE_BOUND('',#256652,.T.); +#256652 = EDGE_LOOP('',(#256653,#256654,#256662,#256670)); +#256653 = ORIENTED_EDGE('',*,*,#256631,.T.); +#256654 = ORIENTED_EDGE('',*,*,#256655,.T.); +#256655 = EDGE_CURVE('',#256623,#256656,#256658,.T.); +#256656 = VERTEX_POINT('',#256657); +#256657 = CARTESIAN_POINT('',(138.733079,-83.379509,1.545)); +#256658 = LINE('',#256659,#256660); +#256659 = CARTESIAN_POINT('',(138.733079,-82.390491,1.545)); +#256660 = VECTOR('',#256661,1.); +#256661 = DIRECTION('',(0.,-1.,0.)); +#256662 = ORIENTED_EDGE('',*,*,#256663,.F.); +#256663 = EDGE_CURVE('',#256664,#256656,#256666,.T.); +#256664 = VERTEX_POINT('',#256665); +#256665 = CARTESIAN_POINT('',(138.733079,-83.379509,1.51)); +#256666 = LINE('',#256667,#256668); +#256667 = CARTESIAN_POINT('',(138.733079,-83.379509,1.51)); +#256668 = VECTOR('',#256669,1.); +#256669 = DIRECTION('',(0.,0.,1.)); +#256670 = ORIENTED_EDGE('',*,*,#256671,.F.); +#256671 = EDGE_CURVE('',#256632,#256664,#256672,.T.); +#256672 = LINE('',#256673,#256674); +#256673 = CARTESIAN_POINT('',(138.733079,-82.390491,1.51)); +#256674 = VECTOR('',#256675,1.); +#256675 = DIRECTION('',(0.,-1.,0.)); +#256676 = PLANE('',#256677); +#256677 = AXIS2_PLACEMENT_3D('',#256678,#256679,#256680); +#256678 = CARTESIAN_POINT('',(138.733079,-82.390491,1.51)); +#256679 = DIRECTION('',(1.,0.,-0.)); +#256680 = DIRECTION('',(0.,-1.,0.)); +#256681 = ADVANCED_FACE('',(#256682),#256707,.T.); +#256682 = FACE_BOUND('',#256683,.T.); +#256683 = EDGE_LOOP('',(#256684,#256685,#256693,#256701)); +#256684 = ORIENTED_EDGE('',*,*,#256663,.T.); +#256685 = ORIENTED_EDGE('',*,*,#256686,.T.); +#256686 = EDGE_CURVE('',#256656,#256687,#256689,.T.); +#256687 = VERTEX_POINT('',#256688); +#256688 = CARTESIAN_POINT('',(138.718147,-83.415557,1.545)); +#256689 = LINE('',#256690,#256691); +#256690 = CARTESIAN_POINT('',(138.733079,-83.379509,1.545)); +#256691 = VECTOR('',#256692,1.); +#256692 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#256693 = ORIENTED_EDGE('',*,*,#256694,.F.); +#256694 = EDGE_CURVE('',#256695,#256687,#256697,.T.); +#256695 = VERTEX_POINT('',#256696); +#256696 = CARTESIAN_POINT('',(138.718147,-83.415557,1.51)); +#256697 = LINE('',#256698,#256699); +#256698 = CARTESIAN_POINT('',(138.718147,-83.415557,1.51)); +#256699 = VECTOR('',#256700,1.); +#256700 = DIRECTION('',(0.,0.,1.)); +#256701 = ORIENTED_EDGE('',*,*,#256702,.F.); +#256702 = EDGE_CURVE('',#256664,#256695,#256703,.T.); +#256703 = LINE('',#256704,#256705); +#256704 = CARTESIAN_POINT('',(138.733079,-83.379509,1.51)); +#256705 = VECTOR('',#256706,1.); +#256706 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#256707 = PLANE('',#256708); +#256708 = AXIS2_PLACEMENT_3D('',#256709,#256710,#256711); +#256709 = CARTESIAN_POINT('',(138.733079,-83.379509,1.51)); +#256710 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#256711 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#256712 = ADVANCED_FACE('',(#256713),#256738,.T.); +#256713 = FACE_BOUND('',#256714,.T.); +#256714 = EDGE_LOOP('',(#256715,#256716,#256724,#256732)); +#256715 = ORIENTED_EDGE('',*,*,#256694,.T.); +#256716 = ORIENTED_EDGE('',*,*,#256717,.T.); +#256717 = EDGE_CURVE('',#256687,#256718,#256720,.T.); +#256718 = VERTEX_POINT('',#256719); +#256719 = CARTESIAN_POINT('',(137.950557,-84.183147,1.545)); +#256720 = LINE('',#256721,#256722); +#256721 = CARTESIAN_POINT('',(138.718147,-83.415557,1.545)); +#256722 = VECTOR('',#256723,1.); +#256723 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#256724 = ORIENTED_EDGE('',*,*,#256725,.F.); +#256725 = EDGE_CURVE('',#256726,#256718,#256728,.T.); +#256726 = VERTEX_POINT('',#256727); +#256727 = CARTESIAN_POINT('',(137.950557,-84.183147,1.51)); +#256728 = LINE('',#256729,#256730); +#256729 = CARTESIAN_POINT('',(137.950557,-84.183147,1.51)); +#256730 = VECTOR('',#256731,1.); +#256731 = DIRECTION('',(0.,0.,1.)); +#256732 = ORIENTED_EDGE('',*,*,#256733,.F.); +#256733 = EDGE_CURVE('',#256695,#256726,#256734,.T.); +#256734 = LINE('',#256735,#256736); +#256735 = CARTESIAN_POINT('',(138.718147,-83.415557,1.51)); +#256736 = VECTOR('',#256737,1.); +#256737 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#256738 = PLANE('',#256739); +#256739 = AXIS2_PLACEMENT_3D('',#256740,#256741,#256742); +#256740 = CARTESIAN_POINT('',(138.718147,-83.415557,1.51)); +#256741 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#256742 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#256743 = ADVANCED_FACE('',(#256744),#256769,.T.); +#256744 = FACE_BOUND('',#256745,.T.); +#256745 = EDGE_LOOP('',(#256746,#256747,#256755,#256763)); +#256746 = ORIENTED_EDGE('',*,*,#256725,.T.); +#256747 = ORIENTED_EDGE('',*,*,#256748,.T.); +#256748 = EDGE_CURVE('',#256718,#256749,#256751,.T.); +#256749 = VERTEX_POINT('',#256750); +#256750 = CARTESIAN_POINT('',(137.914509,-84.198079,1.545)); +#256751 = LINE('',#256752,#256753); +#256752 = CARTESIAN_POINT('',(137.950557,-84.183147,1.545)); +#256753 = VECTOR('',#256754,1.); +#256754 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256755 = ORIENTED_EDGE('',*,*,#256756,.F.); +#256756 = EDGE_CURVE('',#256757,#256749,#256759,.T.); +#256757 = VERTEX_POINT('',#256758); +#256758 = CARTESIAN_POINT('',(137.914509,-84.198079,1.51)); +#256759 = LINE('',#256760,#256761); +#256760 = CARTESIAN_POINT('',(137.914509,-84.198079,1.51)); +#256761 = VECTOR('',#256762,1.); +#256762 = DIRECTION('',(0.,0.,1.)); +#256763 = ORIENTED_EDGE('',*,*,#256764,.F.); +#256764 = EDGE_CURVE('',#256726,#256757,#256765,.T.); +#256765 = LINE('',#256766,#256767); +#256766 = CARTESIAN_POINT('',(137.950557,-84.183147,1.51)); +#256767 = VECTOR('',#256768,1.); +#256768 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256769 = PLANE('',#256770); +#256770 = AXIS2_PLACEMENT_3D('',#256771,#256772,#256773); +#256771 = CARTESIAN_POINT('',(137.950557,-84.183147,1.51)); +#256772 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#256773 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256774 = ADVANCED_FACE('',(#256775),#256800,.T.); +#256775 = FACE_BOUND('',#256776,.T.); +#256776 = EDGE_LOOP('',(#256777,#256778,#256786,#256794)); +#256777 = ORIENTED_EDGE('',*,*,#256756,.T.); +#256778 = ORIENTED_EDGE('',*,*,#256779,.T.); +#256779 = EDGE_CURVE('',#256749,#256780,#256782,.T.); +#256780 = VERTEX_POINT('',#256781); +#256781 = CARTESIAN_POINT('',(136.107793,-84.2,1.545)); +#256782 = LINE('',#256783,#256784); +#256783 = CARTESIAN_POINT('',(137.914509,-84.198079,1.545)); +#256784 = VECTOR('',#256785,1.); +#256785 = DIRECTION('',(-0.999999434745,-1.063254498294E-03,0.)); +#256786 = ORIENTED_EDGE('',*,*,#256787,.F.); +#256787 = EDGE_CURVE('',#256788,#256780,#256790,.T.); +#256788 = VERTEX_POINT('',#256789); +#256789 = CARTESIAN_POINT('',(136.107793,-84.2,1.51)); +#256790 = LINE('',#256791,#256792); +#256791 = CARTESIAN_POINT('',(136.107793,-84.2,1.51)); +#256792 = VECTOR('',#256793,1.); +#256793 = DIRECTION('',(0.,0.,1.)); +#256794 = ORIENTED_EDGE('',*,*,#256795,.F.); +#256795 = EDGE_CURVE('',#256757,#256788,#256796,.T.); +#256796 = LINE('',#256797,#256798); +#256797 = CARTESIAN_POINT('',(137.914509,-84.198079,1.51)); +#256798 = VECTOR('',#256799,1.); +#256799 = DIRECTION('',(-0.999999434745,-1.063254498294E-03,0.)); +#256800 = PLANE('',#256801); +#256801 = AXIS2_PLACEMENT_3D('',#256802,#256803,#256804); +#256802 = CARTESIAN_POINT('',(137.914509,-84.198079,1.51)); +#256803 = DIRECTION('',(1.063254498294E-03,-0.999999434745,0.)); +#256804 = DIRECTION('',(-0.999999434745,-1.063254498294E-03,0.)); +#256805 = ADVANCED_FACE('',(#256806),#256831,.T.); +#256806 = FACE_BOUND('',#256807,.T.); +#256807 = EDGE_LOOP('',(#256808,#256809,#256817,#256825)); +#256808 = ORIENTED_EDGE('',*,*,#256787,.T.); +#256809 = ORIENTED_EDGE('',*,*,#256810,.T.); +#256810 = EDGE_CURVE('',#256780,#256811,#256813,.T.); +#256811 = VERTEX_POINT('',#256812); +#256812 = CARTESIAN_POINT('',(135.961927,-84.343147,1.545)); +#256813 = LINE('',#256814,#256815); +#256814 = CARTESIAN_POINT('',(136.107793,-84.2,1.545)); +#256815 = VECTOR('',#256816,1.); +#256816 = DIRECTION('',(-0.713727573171,-0.700423408586,0.)); +#256817 = ORIENTED_EDGE('',*,*,#256818,.F.); +#256818 = EDGE_CURVE('',#256819,#256811,#256821,.T.); +#256819 = VERTEX_POINT('',#256820); +#256820 = CARTESIAN_POINT('',(135.961927,-84.343147,1.51)); +#256821 = LINE('',#256822,#256823); +#256822 = CARTESIAN_POINT('',(135.961927,-84.343147,1.51)); +#256823 = VECTOR('',#256824,1.); +#256824 = DIRECTION('',(0.,0.,1.)); +#256825 = ORIENTED_EDGE('',*,*,#256826,.F.); +#256826 = EDGE_CURVE('',#256788,#256819,#256827,.T.); +#256827 = LINE('',#256828,#256829); +#256828 = CARTESIAN_POINT('',(136.107793,-84.2,1.51)); +#256829 = VECTOR('',#256830,1.); +#256830 = DIRECTION('',(-0.713727573171,-0.700423408586,0.)); +#256831 = PLANE('',#256832); +#256832 = AXIS2_PLACEMENT_3D('',#256833,#256834,#256835); +#256833 = CARTESIAN_POINT('',(136.107793,-84.2,1.51)); +#256834 = DIRECTION('',(0.700423408586,-0.713727573171,0.)); +#256835 = DIRECTION('',(-0.713727573171,-0.700423408586,0.)); +#256836 = ADVANCED_FACE('',(#256837),#256862,.T.); +#256837 = FACE_BOUND('',#256838,.T.); +#256838 = EDGE_LOOP('',(#256839,#256840,#256848,#256856)); +#256839 = ORIENTED_EDGE('',*,*,#256818,.T.); +#256840 = ORIENTED_EDGE('',*,*,#256841,.T.); +#256841 = EDGE_CURVE('',#256811,#256842,#256844,.T.); +#256842 = VERTEX_POINT('',#256843); +#256843 = CARTESIAN_POINT('',(135.925879,-84.358079,1.545)); +#256844 = LINE('',#256845,#256846); +#256845 = CARTESIAN_POINT('',(135.961927,-84.343147,1.545)); +#256846 = VECTOR('',#256847,1.); +#256847 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256848 = ORIENTED_EDGE('',*,*,#256849,.F.); +#256849 = EDGE_CURVE('',#256850,#256842,#256852,.T.); +#256850 = VERTEX_POINT('',#256851); +#256851 = CARTESIAN_POINT('',(135.925879,-84.358079,1.51)); +#256852 = LINE('',#256853,#256854); +#256853 = CARTESIAN_POINT('',(135.925879,-84.358079,1.51)); +#256854 = VECTOR('',#256855,1.); +#256855 = DIRECTION('',(0.,0.,1.)); +#256856 = ORIENTED_EDGE('',*,*,#256857,.F.); +#256857 = EDGE_CURVE('',#256819,#256850,#256858,.T.); +#256858 = LINE('',#256859,#256860); +#256859 = CARTESIAN_POINT('',(135.961927,-84.343147,1.51)); +#256860 = VECTOR('',#256861,1.); +#256861 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256862 = PLANE('',#256863); +#256863 = AXIS2_PLACEMENT_3D('',#256864,#256865,#256866); +#256864 = CARTESIAN_POINT('',(135.961927,-84.343147,1.51)); +#256865 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#256866 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256867 = ADVANCED_FACE('',(#256868),#256893,.T.); +#256868 = FACE_BOUND('',#256869,.T.); +#256869 = EDGE_LOOP('',(#256870,#256871,#256879,#256887)); +#256870 = ORIENTED_EDGE('',*,*,#256849,.T.); +#256871 = ORIENTED_EDGE('',*,*,#256872,.T.); +#256872 = EDGE_CURVE('',#256842,#256873,#256875,.T.); +#256873 = VERTEX_POINT('',#256874); +#256874 = CARTESIAN_POINT('',(135.243476,-84.36,1.545)); +#256875 = LINE('',#256876,#256877); +#256876 = CARTESIAN_POINT('',(135.925879,-84.358079,1.545)); +#256877 = VECTOR('',#256878,1.); +#256878 = DIRECTION('',(-0.999996037764,-2.815040948737E-03,0.)); +#256879 = ORIENTED_EDGE('',*,*,#256880,.F.); +#256880 = EDGE_CURVE('',#256881,#256873,#256883,.T.); +#256881 = VERTEX_POINT('',#256882); +#256882 = CARTESIAN_POINT('',(135.243476,-84.36,1.51)); +#256883 = LINE('',#256884,#256885); +#256884 = CARTESIAN_POINT('',(135.243476,-84.36,1.51)); +#256885 = VECTOR('',#256886,1.); +#256886 = DIRECTION('',(0.,0.,1.)); +#256887 = ORIENTED_EDGE('',*,*,#256888,.F.); +#256888 = EDGE_CURVE('',#256850,#256881,#256889,.T.); +#256889 = LINE('',#256890,#256891); +#256890 = CARTESIAN_POINT('',(135.925879,-84.358079,1.51)); +#256891 = VECTOR('',#256892,1.); +#256892 = DIRECTION('',(-0.999996037764,-2.815040948737E-03,0.)); +#256893 = PLANE('',#256894); +#256894 = AXIS2_PLACEMENT_3D('',#256895,#256896,#256897); +#256895 = CARTESIAN_POINT('',(135.925879,-84.358079,1.51)); +#256896 = DIRECTION('',(2.815040948737E-03,-0.999996037764,0.)); +#256897 = DIRECTION('',(-0.999996037764,-2.815040948737E-03,0.)); +#256898 = ADVANCED_FACE('',(#256899),#256924,.T.); +#256899 = FACE_BOUND('',#256900,.T.); +#256900 = EDGE_LOOP('',(#256901,#256902,#256910,#256918)); +#256901 = ORIENTED_EDGE('',*,*,#256880,.T.); +#256902 = ORIENTED_EDGE('',*,*,#256903,.T.); +#256903 = EDGE_CURVE('',#256873,#256904,#256906,.T.); +#256904 = VERTEX_POINT('',#256905); +#256905 = CARTESIAN_POINT('',(134.857612,-84.743147,1.545)); +#256906 = LINE('',#256907,#256908); +#256907 = CARTESIAN_POINT('',(135.243476,-84.36,1.545)); +#256908 = VECTOR('',#256909,1.); +#256909 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#256910 = ORIENTED_EDGE('',*,*,#256911,.F.); +#256911 = EDGE_CURVE('',#256912,#256904,#256914,.T.); +#256912 = VERTEX_POINT('',#256913); +#256913 = CARTESIAN_POINT('',(134.857612,-84.743147,1.51)); +#256914 = LINE('',#256915,#256916); +#256915 = CARTESIAN_POINT('',(134.857612,-84.743147,1.51)); +#256916 = VECTOR('',#256917,1.); +#256917 = DIRECTION('',(0.,0.,1.)); +#256918 = ORIENTED_EDGE('',*,*,#256919,.F.); +#256919 = EDGE_CURVE('',#256881,#256912,#256920,.T.); +#256920 = LINE('',#256921,#256922); +#256921 = CARTESIAN_POINT('',(135.243476,-84.36,1.51)); +#256922 = VECTOR('',#256923,1.); +#256923 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#256924 = PLANE('',#256925); +#256925 = AXIS2_PLACEMENT_3D('',#256926,#256927,#256928); +#256926 = CARTESIAN_POINT('',(135.243476,-84.36,1.51)); +#256927 = DIRECTION('',(0.70460409784,-0.709600637899,0.)); +#256928 = DIRECTION('',(-0.709600637899,-0.70460409784,0.)); +#256929 = ADVANCED_FACE('',(#256930),#256955,.T.); +#256930 = FACE_BOUND('',#256931,.T.); +#256931 = EDGE_LOOP('',(#256932,#256933,#256941,#256949)); +#256932 = ORIENTED_EDGE('',*,*,#256911,.T.); +#256933 = ORIENTED_EDGE('',*,*,#256934,.T.); +#256934 = EDGE_CURVE('',#256904,#256935,#256937,.T.); +#256935 = VERTEX_POINT('',#256936); +#256936 = CARTESIAN_POINT('',(134.821564,-84.758079,1.545)); +#256937 = LINE('',#256938,#256939); +#256938 = CARTESIAN_POINT('',(134.857612,-84.743147,1.545)); +#256939 = VECTOR('',#256940,1.); +#256940 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256941 = ORIENTED_EDGE('',*,*,#256942,.F.); +#256942 = EDGE_CURVE('',#256943,#256935,#256945,.T.); +#256943 = VERTEX_POINT('',#256944); +#256944 = CARTESIAN_POINT('',(134.821564,-84.758079,1.51)); +#256945 = LINE('',#256946,#256947); +#256946 = CARTESIAN_POINT('',(134.821564,-84.758079,1.51)); +#256947 = VECTOR('',#256948,1.); +#256948 = DIRECTION('',(0.,0.,1.)); +#256949 = ORIENTED_EDGE('',*,*,#256950,.F.); +#256950 = EDGE_CURVE('',#256912,#256943,#256951,.T.); +#256951 = LINE('',#256952,#256953); +#256952 = CARTESIAN_POINT('',(134.857612,-84.743147,1.51)); +#256953 = VECTOR('',#256954,1.); +#256954 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256955 = PLANE('',#256956); +#256956 = AXIS2_PLACEMENT_3D('',#256957,#256958,#256959); +#256957 = CARTESIAN_POINT('',(134.857612,-84.743147,1.51)); +#256958 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#256959 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#256960 = ADVANCED_FACE('',(#256961),#256986,.T.); +#256961 = FACE_BOUND('',#256962,.T.); +#256962 = EDGE_LOOP('',(#256963,#256964,#256972,#256980)); +#256963 = ORIENTED_EDGE('',*,*,#256942,.T.); +#256964 = ORIENTED_EDGE('',*,*,#256965,.T.); +#256965 = EDGE_CURVE('',#256935,#256966,#256968,.T.); +#256966 = VERTEX_POINT('',#256967); +#256967 = CARTESIAN_POINT('',(134.381422,-84.76,1.545)); +#256968 = LINE('',#256969,#256970); +#256969 = CARTESIAN_POINT('',(134.821564,-84.758079,1.545)); +#256970 = VECTOR('',#256971,1.); +#256971 = DIRECTION('',(-0.999990475704,-4.364458978776E-03,0.)); +#256972 = ORIENTED_EDGE('',*,*,#256973,.F.); +#256973 = EDGE_CURVE('',#256974,#256966,#256976,.T.); +#256974 = VERTEX_POINT('',#256975); +#256975 = CARTESIAN_POINT('',(134.381422,-84.76,1.51)); +#256976 = LINE('',#256977,#256978); +#256977 = CARTESIAN_POINT('',(134.381422,-84.76,1.51)); +#256978 = VECTOR('',#256979,1.); +#256979 = DIRECTION('',(0.,0.,1.)); +#256980 = ORIENTED_EDGE('',*,*,#256981,.F.); +#256981 = EDGE_CURVE('',#256943,#256974,#256982,.T.); +#256982 = LINE('',#256983,#256984); +#256983 = CARTESIAN_POINT('',(134.821564,-84.758079,1.51)); +#256984 = VECTOR('',#256985,1.); +#256985 = DIRECTION('',(-0.999990475704,-4.364458978776E-03,0.)); +#256986 = PLANE('',#256987); +#256987 = AXIS2_PLACEMENT_3D('',#256988,#256989,#256990); +#256988 = CARTESIAN_POINT('',(134.821564,-84.758079,1.51)); +#256989 = DIRECTION('',(4.364458978776E-03,-0.999990475704,0.)); +#256990 = DIRECTION('',(-0.999990475704,-4.364458978776E-03,0.)); +#256991 = ADVANCED_FACE('',(#256992),#257017,.T.); +#256992 = FACE_BOUND('',#256993,.T.); +#256993 = EDGE_LOOP('',(#256994,#256995,#257003,#257011)); +#256994 = ORIENTED_EDGE('',*,*,#256973,.T.); +#256995 = ORIENTED_EDGE('',*,*,#256996,.T.); +#256996 = EDGE_CURVE('',#256966,#256997,#256999,.T.); +#256997 = VERTEX_POINT('',#256998); +#256998 = CARTESIAN_POINT('',(132.598529,-86.542892,1.545)); +#256999 = LINE('',#257000,#257001); +#257000 = CARTESIAN_POINT('',(134.381422,-84.76,1.545)); +#257001 = VECTOR('',#257002,1.); +#257002 = DIRECTION('',(-0.70710697949,-0.707106582883,0.)); +#257003 = ORIENTED_EDGE('',*,*,#257004,.F.); +#257004 = EDGE_CURVE('',#257005,#256997,#257007,.T.); +#257005 = VERTEX_POINT('',#257006); +#257006 = CARTESIAN_POINT('',(132.598529,-86.542892,1.51)); +#257007 = LINE('',#257008,#257009); +#257008 = CARTESIAN_POINT('',(132.598529,-86.542892,1.51)); +#257009 = VECTOR('',#257010,1.); +#257010 = DIRECTION('',(0.,0.,1.)); +#257011 = ORIENTED_EDGE('',*,*,#257012,.F.); +#257012 = EDGE_CURVE('',#256974,#257005,#257013,.T.); +#257013 = LINE('',#257014,#257015); +#257014 = CARTESIAN_POINT('',(134.381422,-84.76,1.51)); +#257015 = VECTOR('',#257016,1.); +#257016 = DIRECTION('',(-0.70710697949,-0.707106582883,0.)); +#257017 = PLANE('',#257018); +#257018 = AXIS2_PLACEMENT_3D('',#257019,#257020,#257021); +#257019 = CARTESIAN_POINT('',(134.381422,-84.76,1.51)); +#257020 = DIRECTION('',(0.707106582883,-0.70710697949,0.)); +#257021 = DIRECTION('',(-0.70710697949,-0.707106582883,0.)); +#257022 = ADVANCED_FACE('',(#257023),#257048,.T.); +#257023 = FACE_BOUND('',#257024,.T.); +#257024 = EDGE_LOOP('',(#257025,#257026,#257034,#257042)); +#257025 = ORIENTED_EDGE('',*,*,#257004,.T.); +#257026 = ORIENTED_EDGE('',*,*,#257027,.T.); +#257027 = EDGE_CURVE('',#256997,#257028,#257030,.T.); +#257028 = VERTEX_POINT('',#257029); +#257029 = CARTESIAN_POINT('',(137.530064,-91.477146,1.545)); +#257030 = LINE('',#257031,#257032); +#257031 = CARTESIAN_POINT('',(132.598529,-86.542892,1.545)); +#257032 = VECTOR('',#257033,1.); +#257033 = DIRECTION('',(0.706911876532,-0.707301632133,0.)); +#257034 = ORIENTED_EDGE('',*,*,#257035,.F.); +#257035 = EDGE_CURVE('',#257036,#257028,#257038,.T.); +#257036 = VERTEX_POINT('',#257037); +#257037 = CARTESIAN_POINT('',(137.530064,-91.477146,1.51)); +#257038 = LINE('',#257039,#257040); +#257039 = CARTESIAN_POINT('',(137.530064,-91.477146,1.51)); +#257040 = VECTOR('',#257041,1.); +#257041 = DIRECTION('',(0.,0.,1.)); +#257042 = ORIENTED_EDGE('',*,*,#257043,.F.); +#257043 = EDGE_CURVE('',#257005,#257036,#257044,.T.); +#257044 = LINE('',#257045,#257046); +#257045 = CARTESIAN_POINT('',(132.598529,-86.542892,1.51)); +#257046 = VECTOR('',#257047,1.); +#257047 = DIRECTION('',(0.706911876532,-0.707301632133,0.)); +#257048 = PLANE('',#257049); +#257049 = AXIS2_PLACEMENT_3D('',#257050,#257051,#257052); +#257050 = CARTESIAN_POINT('',(132.598529,-86.542892,1.51)); +#257051 = DIRECTION('',(0.707301632133,0.706911876532,-0.)); +#257052 = DIRECTION('',(0.706911876532,-0.707301632133,0.)); +#257053 = ADVANCED_FACE('',(#257054),#257079,.T.); +#257054 = FACE_BOUND('',#257055,.T.); +#257055 = EDGE_LOOP('',(#257056,#257057,#257065,#257073)); +#257056 = ORIENTED_EDGE('',*,*,#257035,.T.); +#257057 = ORIENTED_EDGE('',*,*,#257058,.T.); +#257058 = EDGE_CURVE('',#257028,#257059,#257061,.T.); +#257059 = VERTEX_POINT('',#257060); +#257060 = CARTESIAN_POINT('',(137.544996,-91.513194,1.545)); +#257061 = LINE('',#257062,#257063); +#257062 = CARTESIAN_POINT('',(137.530064,-91.477146,1.545)); +#257063 = VECTOR('',#257064,1.); +#257064 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#257065 = ORIENTED_EDGE('',*,*,#257066,.F.); +#257066 = EDGE_CURVE('',#257067,#257059,#257069,.T.); +#257067 = VERTEX_POINT('',#257068); +#257068 = CARTESIAN_POINT('',(137.544996,-91.513194,1.51)); +#257069 = LINE('',#257070,#257071); +#257070 = CARTESIAN_POINT('',(137.544996,-91.513194,1.51)); +#257071 = VECTOR('',#257072,1.); +#257072 = DIRECTION('',(0.,0.,1.)); +#257073 = ORIENTED_EDGE('',*,*,#257074,.F.); +#257074 = EDGE_CURVE('',#257036,#257067,#257075,.T.); +#257075 = LINE('',#257076,#257077); +#257076 = CARTESIAN_POINT('',(137.530064,-91.477146,1.51)); +#257077 = VECTOR('',#257078,1.); +#257078 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#257079 = PLANE('',#257080); +#257080 = AXIS2_PLACEMENT_3D('',#257081,#257082,#257083); +#257081 = CARTESIAN_POINT('',(137.530064,-91.477146,1.51)); +#257082 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#257083 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#257084 = ADVANCED_FACE('',(#257085),#257110,.T.); +#257085 = FACE_BOUND('',#257086,.T.); +#257086 = EDGE_LOOP('',(#257087,#257088,#257096,#257104)); +#257087 = ORIENTED_EDGE('',*,*,#257066,.T.); +#257088 = ORIENTED_EDGE('',*,*,#257089,.T.); +#257089 = EDGE_CURVE('',#257059,#257090,#257092,.T.); +#257090 = VERTEX_POINT('',#257091); +#257091 = CARTESIAN_POINT('',(137.544996,-117.672592,1.545)); +#257092 = LINE('',#257093,#257094); +#257093 = CARTESIAN_POINT('',(137.544996,-91.513194,1.545)); +#257094 = VECTOR('',#257095,1.); +#257095 = DIRECTION('',(0.,-1.,0.)); +#257096 = ORIENTED_EDGE('',*,*,#257097,.F.); +#257097 = EDGE_CURVE('',#257098,#257090,#257100,.T.); +#257098 = VERTEX_POINT('',#257099); +#257099 = CARTESIAN_POINT('',(137.544996,-117.672592,1.51)); +#257100 = LINE('',#257101,#257102); +#257101 = CARTESIAN_POINT('',(137.544996,-117.672592,1.51)); +#257102 = VECTOR('',#257103,1.); +#257103 = DIRECTION('',(0.,0.,1.)); +#257104 = ORIENTED_EDGE('',*,*,#257105,.F.); +#257105 = EDGE_CURVE('',#257067,#257098,#257106,.T.); +#257106 = LINE('',#257107,#257108); +#257107 = CARTESIAN_POINT('',(137.544996,-91.513194,1.51)); +#257108 = VECTOR('',#257109,1.); +#257109 = DIRECTION('',(0.,-1.,0.)); +#257110 = PLANE('',#257111); +#257111 = AXIS2_PLACEMENT_3D('',#257112,#257113,#257114); +#257112 = CARTESIAN_POINT('',(137.544996,-91.513194,1.51)); +#257113 = DIRECTION('',(1.,0.,-0.)); +#257114 = DIRECTION('',(0.,-1.,0.)); +#257115 = ADVANCED_FACE('',(#257116),#257141,.T.); +#257116 = FACE_BOUND('',#257117,.T.); +#257117 = EDGE_LOOP('',(#257118,#257119,#257127,#257135)); +#257118 = ORIENTED_EDGE('',*,*,#257097,.T.); +#257119 = ORIENTED_EDGE('',*,*,#257120,.T.); +#257120 = EDGE_CURVE('',#257090,#257121,#257123,.T.); +#257121 = VERTEX_POINT('',#257122); +#257122 = CARTESIAN_POINT('',(137.530064,-117.708641,1.545)); +#257123 = LINE('',#257124,#257125); +#257124 = CARTESIAN_POINT('',(137.544996,-117.672592,1.545)); +#257125 = VECTOR('',#257126,1.); +#257126 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#257127 = ORIENTED_EDGE('',*,*,#257128,.F.); +#257128 = EDGE_CURVE('',#257129,#257121,#257131,.T.); +#257129 = VERTEX_POINT('',#257130); +#257130 = CARTESIAN_POINT('',(137.530064,-117.708641,1.51)); +#257131 = LINE('',#257132,#257133); +#257132 = CARTESIAN_POINT('',(137.530064,-117.708641,1.51)); +#257133 = VECTOR('',#257134,1.); +#257134 = DIRECTION('',(0.,0.,1.)); +#257135 = ORIENTED_EDGE('',*,*,#257136,.F.); +#257136 = EDGE_CURVE('',#257098,#257129,#257137,.T.); +#257137 = LINE('',#257138,#257139); +#257138 = CARTESIAN_POINT('',(137.544996,-117.672592,1.51)); +#257139 = VECTOR('',#257140,1.); +#257140 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#257141 = PLANE('',#257142); +#257142 = AXIS2_PLACEMENT_3D('',#257143,#257144,#257145); +#257143 = CARTESIAN_POINT('',(137.544996,-117.672592,1.51)); +#257144 = DIRECTION('',(0.923879393968,-0.382683766837,0.)); +#257145 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#257146 = ADVANCED_FACE('',(#257147),#257172,.T.); +#257147 = FACE_BOUND('',#257148,.T.); +#257148 = EDGE_LOOP('',(#257149,#257150,#257158,#257166)); +#257149 = ORIENTED_EDGE('',*,*,#257128,.T.); +#257150 = ORIENTED_EDGE('',*,*,#257151,.T.); +#257151 = EDGE_CURVE('',#257121,#257152,#257154,.T.); +#257152 = VERTEX_POINT('',#257153); +#257153 = CARTESIAN_POINT('',(136.5,-118.741422,1.545)); +#257154 = LINE('',#257155,#257156); +#257155 = CARTESIAN_POINT('',(137.530064,-117.708641,1.545)); +#257156 = VECTOR('',#257157,1.); +#257157 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#257158 = ORIENTED_EDGE('',*,*,#257159,.F.); +#257159 = EDGE_CURVE('',#257160,#257152,#257162,.T.); +#257160 = VERTEX_POINT('',#257161); +#257161 = CARTESIAN_POINT('',(136.5,-118.741422,1.51)); +#257162 = LINE('',#257163,#257164); +#257163 = CARTESIAN_POINT('',(136.5,-118.741422,1.51)); +#257164 = VECTOR('',#257165,1.); +#257165 = DIRECTION('',(0.,0.,1.)); +#257166 = ORIENTED_EDGE('',*,*,#257167,.F.); +#257167 = EDGE_CURVE('',#257129,#257160,#257168,.T.); +#257168 = LINE('',#257169,#257170); +#257169 = CARTESIAN_POINT('',(137.530064,-117.708641,1.51)); +#257170 = VECTOR('',#257171,1.); +#257171 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#257172 = PLANE('',#257173); +#257173 = AXIS2_PLACEMENT_3D('',#257174,#257175,#257176); +#257174 = CARTESIAN_POINT('',(137.530064,-117.708641,1.51)); +#257175 = DIRECTION('',(0.708037506585,-0.70617482911,0.)); +#257176 = DIRECTION('',(-0.70617482911,-0.708037506585,0.)); +#257177 = ADVANCED_FACE('',(#257178),#257203,.T.); +#257178 = FACE_BOUND('',#257179,.T.); +#257179 = EDGE_LOOP('',(#257180,#257181,#257189,#257197)); +#257180 = ORIENTED_EDGE('',*,*,#257159,.T.); +#257181 = ORIENTED_EDGE('',*,*,#257182,.T.); +#257182 = EDGE_CURVE('',#257152,#257183,#257185,.T.); +#257183 = VERTEX_POINT('',#257184); +#257184 = CARTESIAN_POINT('',(136.5,-125.518869,1.545)); +#257185 = LINE('',#257186,#257187); +#257186 = CARTESIAN_POINT('',(136.5,-118.741422,1.545)); +#257187 = VECTOR('',#257188,1.); +#257188 = DIRECTION('',(0.,-1.,0.)); +#257189 = ORIENTED_EDGE('',*,*,#257190,.F.); +#257190 = EDGE_CURVE('',#257191,#257183,#257193,.T.); +#257191 = VERTEX_POINT('',#257192); +#257192 = CARTESIAN_POINT('',(136.5,-125.518869,1.51)); +#257193 = LINE('',#257194,#257195); +#257194 = CARTESIAN_POINT('',(136.5,-125.518869,1.51)); +#257195 = VECTOR('',#257196,1.); +#257196 = DIRECTION('',(0.,0.,1.)); +#257197 = ORIENTED_EDGE('',*,*,#257198,.F.); +#257198 = EDGE_CURVE('',#257160,#257191,#257199,.T.); +#257199 = LINE('',#257200,#257201); +#257200 = CARTESIAN_POINT('',(136.5,-118.741422,1.51)); +#257201 = VECTOR('',#257202,1.); +#257202 = DIRECTION('',(0.,-1.,0.)); +#257203 = PLANE('',#257204); +#257204 = AXIS2_PLACEMENT_3D('',#257205,#257206,#257207); +#257205 = CARTESIAN_POINT('',(136.5,-118.741422,1.51)); +#257206 = DIRECTION('',(1.,0.,-0.)); +#257207 = DIRECTION('',(0.,-1.,0.)); +#257208 = ADVANCED_FACE('',(#257209),#257234,.T.); +#257209 = FACE_BOUND('',#257210,.T.); +#257210 = EDGE_LOOP('',(#257211,#257212,#257220,#257228)); +#257211 = ORIENTED_EDGE('',*,*,#257190,.T.); +#257212 = ORIENTED_EDGE('',*,*,#257213,.T.); +#257213 = EDGE_CURVE('',#257183,#257214,#257216,.T.); +#257214 = VERTEX_POINT('',#257215); +#257215 = CARTESIAN_POINT('',(136.560842,-125.502567,1.545)); +#257216 = LINE('',#257217,#257218); +#257217 = CARTESIAN_POINT('',(136.5,-125.518869,1.545)); +#257218 = VECTOR('',#257219,1.); +#257219 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#257220 = ORIENTED_EDGE('',*,*,#257221,.F.); +#257221 = EDGE_CURVE('',#257222,#257214,#257224,.T.); +#257222 = VERTEX_POINT('',#257223); +#257223 = CARTESIAN_POINT('',(136.560842,-125.502567,1.51)); +#257224 = LINE('',#257225,#257226); +#257225 = CARTESIAN_POINT('',(136.560842,-125.502567,1.51)); +#257226 = VECTOR('',#257227,1.); +#257227 = DIRECTION('',(0.,0.,1.)); +#257228 = ORIENTED_EDGE('',*,*,#257229,.F.); +#257229 = EDGE_CURVE('',#257191,#257222,#257230,.T.); +#257230 = LINE('',#257231,#257232); +#257231 = CARTESIAN_POINT('',(136.5,-125.518869,1.51)); +#257232 = VECTOR('',#257233,1.); +#257233 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#257234 = PLANE('',#257235); +#257235 = AXIS2_PLACEMENT_3D('',#257236,#257237,#257238); +#257236 = CARTESIAN_POINT('',(136.5,-125.518869,1.51)); +#257237 = DIRECTION('',(-0.258810679488,0.96592806781,0.)); +#257238 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#257239 = ADVANCED_FACE('',(#257240),#257267,.T.); +#257240 = FACE_BOUND('',#257241,.T.); +#257241 = EDGE_LOOP('',(#257242,#257243,#257252,#257260)); +#257242 = ORIENTED_EDGE('',*,*,#257221,.T.); +#257243 = ORIENTED_EDGE('',*,*,#257244,.T.); +#257244 = EDGE_CURVE('',#257214,#257245,#257247,.T.); +#257245 = VERTEX_POINT('',#257246); +#257246 = CARTESIAN_POINT('',(136.329289,-125.670711,1.545)); +#257247 = CIRCLE('',#257248,0.29999980913); +#257248 = AXIS2_PLACEMENT_3D('',#257249,#257250,#257251); +#257249 = CARTESIAN_POINT('',(136.59999946889,-125.800000317,1.545)); +#257250 = DIRECTION('',(-0.,0.,-1.)); +#257251 = DIRECTION('',(-0.13052497935,0.99144502105,0.)); +#257252 = ORIENTED_EDGE('',*,*,#257253,.F.); +#257253 = EDGE_CURVE('',#257254,#257245,#257256,.T.); +#257254 = VERTEX_POINT('',#257255); +#257255 = CARTESIAN_POINT('',(136.329289,-125.670711,1.51)); +#257256 = LINE('',#257257,#257258); +#257257 = CARTESIAN_POINT('',(136.329289,-125.670711,1.51)); +#257258 = VECTOR('',#257259,1.); +#257259 = DIRECTION('',(0.,0.,1.)); +#257260 = ORIENTED_EDGE('',*,*,#257261,.F.); +#257261 = EDGE_CURVE('',#257222,#257254,#257262,.T.); +#257262 = CIRCLE('',#257263,0.29999980913); +#257263 = AXIS2_PLACEMENT_3D('',#257264,#257265,#257266); +#257264 = CARTESIAN_POINT('',(136.59999946889,-125.800000317,1.51)); +#257265 = DIRECTION('',(-0.,0.,-1.)); +#257266 = DIRECTION('',(-0.13052497935,0.99144502105,0.)); +#257267 = CYLINDRICAL_SURFACE('',#257268,0.29999980913); +#257268 = AXIS2_PLACEMENT_3D('',#257269,#257270,#257271); +#257269 = CARTESIAN_POINT('',(136.59999946889,-125.800000317,1.51)); +#257270 = DIRECTION('',(-0.,0.,-1.)); +#257271 = DIRECTION('',(-0.13052497935,0.99144502105,0.)); +#257272 = ADVANCED_FACE('',(#257273),#257298,.T.); +#257273 = FACE_BOUND('',#257274,.T.); +#257274 = EDGE_LOOP('',(#257275,#257276,#257284,#257292)); +#257275 = ORIENTED_EDGE('',*,*,#257253,.T.); +#257276 = ORIENTED_EDGE('',*,*,#257277,.T.); +#257277 = EDGE_CURVE('',#257245,#257278,#257280,.T.); +#257278 = VERTEX_POINT('',#257279); +#257279 = CARTESIAN_POINT('',(136.316853,-125.655557,1.545)); +#257280 = LINE('',#257281,#257282); +#257281 = CARTESIAN_POINT('',(136.329289,-125.670711,1.545)); +#257282 = VECTOR('',#257283,1.); +#257283 = DIRECTION('',(-0.634376019381,0.773024621881,0.)); +#257284 = ORIENTED_EDGE('',*,*,#257285,.F.); +#257285 = EDGE_CURVE('',#257286,#257278,#257288,.T.); +#257286 = VERTEX_POINT('',#257287); +#257287 = CARTESIAN_POINT('',(136.316853,-125.655557,1.51)); +#257288 = LINE('',#257289,#257290); +#257289 = CARTESIAN_POINT('',(136.316853,-125.655557,1.51)); +#257290 = VECTOR('',#257291,1.); +#257291 = DIRECTION('',(0.,0.,1.)); +#257292 = ORIENTED_EDGE('',*,*,#257293,.F.); +#257293 = EDGE_CURVE('',#257254,#257286,#257294,.T.); +#257294 = LINE('',#257295,#257296); +#257295 = CARTESIAN_POINT('',(136.329289,-125.670711,1.51)); +#257296 = VECTOR('',#257297,1.); +#257297 = DIRECTION('',(-0.634376019381,0.773024621881,0.)); +#257298 = PLANE('',#257299); +#257299 = AXIS2_PLACEMENT_3D('',#257300,#257301,#257302); +#257300 = CARTESIAN_POINT('',(136.329289,-125.670711,1.51)); +#257301 = DIRECTION('',(-0.773024621881,-0.634376019381,0.)); +#257302 = DIRECTION('',(-0.634376019381,0.773024621881,0.)); +#257303 = ADVANCED_FACE('',(#257304),#257329,.T.); +#257304 = FACE_BOUND('',#257305,.T.); +#257305 = EDGE_LOOP('',(#257306,#257307,#257315,#257323)); +#257306 = ORIENTED_EDGE('',*,*,#257285,.T.); +#257307 = ORIENTED_EDGE('',*,*,#257308,.T.); +#257308 = EDGE_CURVE('',#257278,#257309,#257311,.T.); +#257309 = VERTEX_POINT('',#257310); +#257310 = CARTESIAN_POINT('',(136.301921,-125.619509,1.545)); +#257311 = LINE('',#257312,#257313); +#257312 = CARTESIAN_POINT('',(136.316853,-125.655557,1.545)); +#257313 = VECTOR('',#257314,1.); +#257314 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#257315 = ORIENTED_EDGE('',*,*,#257316,.F.); +#257316 = EDGE_CURVE('',#257317,#257309,#257319,.T.); +#257317 = VERTEX_POINT('',#257318); +#257318 = CARTESIAN_POINT('',(136.301921,-125.619509,1.51)); +#257319 = LINE('',#257320,#257321); +#257320 = CARTESIAN_POINT('',(136.301921,-125.619509,1.51)); +#257321 = VECTOR('',#257322,1.); +#257322 = DIRECTION('',(0.,0.,1.)); +#257323 = ORIENTED_EDGE('',*,*,#257324,.F.); +#257324 = EDGE_CURVE('',#257286,#257317,#257325,.T.); +#257325 = LINE('',#257326,#257327); +#257326 = CARTESIAN_POINT('',(136.316853,-125.655557,1.51)); +#257327 = VECTOR('',#257328,1.); +#257328 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#257329 = PLANE('',#257330); +#257330 = AXIS2_PLACEMENT_3D('',#257331,#257332,#257333); +#257331 = CARTESIAN_POINT('',(136.316853,-125.655557,1.51)); +#257332 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#257333 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#257334 = ADVANCED_FACE('',(#257335),#257360,.T.); +#257335 = FACE_BOUND('',#257336,.T.); +#257336 = EDGE_LOOP('',(#257337,#257338,#257346,#257354)); +#257337 = ORIENTED_EDGE('',*,*,#257316,.T.); +#257338 = ORIENTED_EDGE('',*,*,#257339,.T.); +#257339 = EDGE_CURVE('',#257309,#257340,#257342,.T.); +#257340 = VERTEX_POINT('',#257341); +#257341 = CARTESIAN_POINT('',(136.301921,-118.680491,1.545)); +#257342 = LINE('',#257343,#257344); +#257343 = CARTESIAN_POINT('',(136.301921,-125.619509,1.545)); +#257344 = VECTOR('',#257345,1.); +#257345 = DIRECTION('',(0.,1.,0.)); +#257346 = ORIENTED_EDGE('',*,*,#257347,.F.); +#257347 = EDGE_CURVE('',#257348,#257340,#257350,.T.); +#257348 = VERTEX_POINT('',#257349); +#257349 = CARTESIAN_POINT('',(136.301921,-118.680491,1.51)); +#257350 = LINE('',#257351,#257352); +#257351 = CARTESIAN_POINT('',(136.301921,-118.680491,1.51)); +#257352 = VECTOR('',#257353,1.); +#257353 = DIRECTION('',(0.,0.,1.)); +#257354 = ORIENTED_EDGE('',*,*,#257355,.F.); +#257355 = EDGE_CURVE('',#257317,#257348,#257356,.T.); +#257356 = LINE('',#257357,#257358); +#257357 = CARTESIAN_POINT('',(136.301921,-125.619509,1.51)); +#257358 = VECTOR('',#257359,1.); +#257359 = DIRECTION('',(0.,1.,0.)); +#257360 = PLANE('',#257361); +#257361 = AXIS2_PLACEMENT_3D('',#257362,#257363,#257364); +#257362 = CARTESIAN_POINT('',(136.301921,-125.619509,1.51)); +#257363 = DIRECTION('',(-1.,0.,0.)); +#257364 = DIRECTION('',(0.,1.,0.)); +#257365 = ADVANCED_FACE('',(#257366),#257391,.T.); +#257366 = FACE_BOUND('',#257367,.T.); +#257367 = EDGE_LOOP('',(#257368,#257369,#257377,#257385)); +#257368 = ORIENTED_EDGE('',*,*,#257347,.T.); +#257369 = ORIENTED_EDGE('',*,*,#257370,.T.); +#257370 = EDGE_CURVE('',#257340,#257371,#257373,.T.); +#257371 = VERTEX_POINT('',#257372); +#257372 = CARTESIAN_POINT('',(136.316853,-118.644443,1.545)); +#257373 = LINE('',#257374,#257375); +#257374 = CARTESIAN_POINT('',(136.301921,-118.680491,1.545)); +#257375 = VECTOR('',#257376,1.); +#257376 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257377 = ORIENTED_EDGE('',*,*,#257378,.F.); +#257378 = EDGE_CURVE('',#257379,#257371,#257381,.T.); +#257379 = VERTEX_POINT('',#257380); +#257380 = CARTESIAN_POINT('',(136.316853,-118.644443,1.51)); +#257381 = LINE('',#257382,#257383); +#257382 = CARTESIAN_POINT('',(136.316853,-118.644443,1.51)); +#257383 = VECTOR('',#257384,1.); +#257384 = DIRECTION('',(0.,0.,1.)); +#257385 = ORIENTED_EDGE('',*,*,#257386,.F.); +#257386 = EDGE_CURVE('',#257348,#257379,#257387,.T.); +#257387 = LINE('',#257388,#257389); +#257388 = CARTESIAN_POINT('',(136.301921,-118.680491,1.51)); +#257389 = VECTOR('',#257390,1.); +#257390 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257391 = PLANE('',#257392); +#257392 = AXIS2_PLACEMENT_3D('',#257393,#257394,#257395); +#257393 = CARTESIAN_POINT('',(136.301921,-118.680491,1.51)); +#257394 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#257395 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257396 = ADVANCED_FACE('',(#257397),#257422,.T.); +#257397 = FACE_BOUND('',#257398,.T.); +#257398 = EDGE_LOOP('',(#257399,#257400,#257408,#257416)); +#257399 = ORIENTED_EDGE('',*,*,#257378,.T.); +#257400 = ORIENTED_EDGE('',*,*,#257401,.T.); +#257401 = EDGE_CURVE('',#257371,#257402,#257404,.T.); +#257402 = VERTEX_POINT('',#257403); +#257403 = CARTESIAN_POINT('',(137.346917,-117.611661,1.545)); +#257404 = LINE('',#257405,#257406); +#257405 = CARTESIAN_POINT('',(136.316853,-118.644443,1.545)); +#257406 = VECTOR('',#257407,1.); +#257407 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#257408 = ORIENTED_EDGE('',*,*,#257409,.F.); +#257409 = EDGE_CURVE('',#257410,#257402,#257412,.T.); +#257410 = VERTEX_POINT('',#257411); +#257411 = CARTESIAN_POINT('',(137.346917,-117.611661,1.51)); +#257412 = LINE('',#257413,#257414); +#257413 = CARTESIAN_POINT('',(137.346917,-117.611661,1.51)); +#257414 = VECTOR('',#257415,1.); +#257415 = DIRECTION('',(0.,0.,1.)); +#257416 = ORIENTED_EDGE('',*,*,#257417,.F.); +#257417 = EDGE_CURVE('',#257379,#257410,#257418,.T.); +#257418 = LINE('',#257419,#257420); +#257419 = CARTESIAN_POINT('',(136.316853,-118.644443,1.51)); +#257420 = VECTOR('',#257421,1.); +#257421 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#257422 = PLANE('',#257423); +#257423 = AXIS2_PLACEMENT_3D('',#257424,#257425,#257426); +#257424 = CARTESIAN_POINT('',(136.316853,-118.644443,1.51)); +#257425 = DIRECTION('',(-0.708037848464,0.706174486329,0.)); +#257426 = DIRECTION('',(0.706174486329,0.708037848464,0.)); +#257427 = ADVANCED_FACE('',(#257428),#257453,.T.); +#257428 = FACE_BOUND('',#257429,.T.); +#257429 = EDGE_LOOP('',(#257430,#257431,#257439,#257447)); +#257430 = ORIENTED_EDGE('',*,*,#257409,.T.); +#257431 = ORIENTED_EDGE('',*,*,#257432,.T.); +#257432 = EDGE_CURVE('',#257402,#257433,#257435,.T.); +#257433 = VERTEX_POINT('',#257434); +#257434 = CARTESIAN_POINT('',(137.346917,-91.574124,1.545)); +#257435 = LINE('',#257436,#257437); +#257436 = CARTESIAN_POINT('',(137.346917,-117.611661,1.545)); +#257437 = VECTOR('',#257438,1.); +#257438 = DIRECTION('',(0.,1.,0.)); +#257439 = ORIENTED_EDGE('',*,*,#257440,.F.); +#257440 = EDGE_CURVE('',#257441,#257433,#257443,.T.); +#257441 = VERTEX_POINT('',#257442); +#257442 = CARTESIAN_POINT('',(137.346917,-91.574124,1.51)); +#257443 = LINE('',#257444,#257445); +#257444 = CARTESIAN_POINT('',(137.346917,-91.574124,1.51)); +#257445 = VECTOR('',#257446,1.); +#257446 = DIRECTION('',(0.,0.,1.)); +#257447 = ORIENTED_EDGE('',*,*,#257448,.F.); +#257448 = EDGE_CURVE('',#257410,#257441,#257449,.T.); +#257449 = LINE('',#257450,#257451); +#257450 = CARTESIAN_POINT('',(137.346917,-117.611661,1.51)); +#257451 = VECTOR('',#257452,1.); +#257452 = DIRECTION('',(0.,1.,0.)); +#257453 = PLANE('',#257454); +#257454 = AXIS2_PLACEMENT_3D('',#257455,#257456,#257457); +#257455 = CARTESIAN_POINT('',(137.346917,-117.611661,1.51)); +#257456 = DIRECTION('',(-1.,0.,0.)); +#257457 = DIRECTION('',(0.,1.,0.)); +#257458 = ADVANCED_FACE('',(#257459),#257484,.T.); +#257459 = FACE_BOUND('',#257460,.T.); +#257460 = EDGE_LOOP('',(#257461,#257462,#257470,#257478)); +#257461 = ORIENTED_EDGE('',*,*,#257440,.T.); +#257462 = ORIENTED_EDGE('',*,*,#257463,.T.); +#257463 = EDGE_CURVE('',#257433,#257464,#257466,.T.); +#257464 = VERTEX_POINT('',#257465); +#257465 = CARTESIAN_POINT('',(132.373961,-86.59845,1.545)); +#257466 = LINE('',#257467,#257468); +#257467 = CARTESIAN_POINT('',(137.346917,-91.574124,1.545)); +#257468 = VECTOR('',#257469,1.); +#257469 = DIRECTION('',(-0.706913570795,0.707299938799,0.)); +#257470 = ORIENTED_EDGE('',*,*,#257471,.F.); +#257471 = EDGE_CURVE('',#257472,#257464,#257474,.T.); +#257472 = VERTEX_POINT('',#257473); +#257473 = CARTESIAN_POINT('',(132.373961,-86.59845,1.51)); +#257474 = LINE('',#257475,#257476); +#257475 = CARTESIAN_POINT('',(132.373961,-86.59845,1.51)); +#257476 = VECTOR('',#257477,1.); +#257477 = DIRECTION('',(0.,0.,1.)); +#257478 = ORIENTED_EDGE('',*,*,#257479,.F.); +#257479 = EDGE_CURVE('',#257441,#257472,#257480,.T.); +#257480 = LINE('',#257481,#257482); +#257481 = CARTESIAN_POINT('',(137.346917,-91.574124,1.51)); +#257482 = VECTOR('',#257483,1.); +#257483 = DIRECTION('',(-0.706913570795,0.707299938799,0.)); +#257484 = PLANE('',#257485); +#257485 = AXIS2_PLACEMENT_3D('',#257486,#257487,#257488); +#257486 = CARTESIAN_POINT('',(137.346917,-91.574124,1.51)); +#257487 = DIRECTION('',(-0.707299938799,-0.706913570795,0.)); +#257488 = DIRECTION('',(-0.706913570795,0.707299938799,0.)); +#257489 = ADVANCED_FACE('',(#257490),#257517,.T.); +#257490 = FACE_BOUND('',#257491,.T.); +#257491 = EDGE_LOOP('',(#257492,#257493,#257502,#257510)); +#257492 = ORIENTED_EDGE('',*,*,#257471,.T.); +#257493 = ORIENTED_EDGE('',*,*,#257494,.T.); +#257494 = EDGE_CURVE('',#257464,#257495,#257497,.T.); +#257495 = VERTEX_POINT('',#257496); +#257496 = CARTESIAN_POINT('',(132.373961,-86.487336,1.545)); +#257497 = CIRCLE('',#257498,9.999758414113E-02); +#257498 = AXIS2_PLACEMENT_3D('',#257499,#257500,#257501); +#257499 = CARTESIAN_POINT('',(132.45710507125,-86.542893,1.545)); +#257500 = DIRECTION('',(0.,0.,-1.)); +#257501 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#257502 = ORIENTED_EDGE('',*,*,#257503,.F.); +#257503 = EDGE_CURVE('',#257504,#257495,#257506,.T.); +#257504 = VERTEX_POINT('',#257505); +#257505 = CARTESIAN_POINT('',(132.373961,-86.487336,1.51)); +#257506 = LINE('',#257507,#257508); +#257507 = CARTESIAN_POINT('',(132.373961,-86.487336,1.51)); +#257508 = VECTOR('',#257509,1.); +#257509 = DIRECTION('',(0.,0.,1.)); +#257510 = ORIENTED_EDGE('',*,*,#257511,.F.); +#257511 = EDGE_CURVE('',#257472,#257504,#257512,.T.); +#257512 = CIRCLE('',#257513,9.999758414113E-02); +#257513 = AXIS2_PLACEMENT_3D('',#257514,#257515,#257516); +#257514 = CARTESIAN_POINT('',(132.45710507125,-86.542893,1.51)); +#257515 = DIRECTION('',(0.,0.,-1.)); +#257516 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#257517 = CYLINDRICAL_SURFACE('',#257518,9.999758414113E-02); +#257518 = AXIS2_PLACEMENT_3D('',#257519,#257520,#257521); +#257519 = CARTESIAN_POINT('',(132.45710507125,-86.542893,1.51)); +#257520 = DIRECTION('',(0.,0.,-1.)); +#257521 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#257522 = ADVANCED_FACE('',(#257523),#257548,.T.); +#257523 = FACE_BOUND('',#257524,.T.); +#257524 = EDGE_LOOP('',(#257525,#257526,#257534,#257542)); +#257525 = ORIENTED_EDGE('',*,*,#257503,.T.); +#257526 = ORIENTED_EDGE('',*,*,#257527,.T.); +#257527 = EDGE_CURVE('',#257495,#257528,#257530,.T.); +#257528 = VERTEX_POINT('',#257529); +#257529 = CARTESIAN_POINT('',(134.284443,-84.576853,1.545)); +#257530 = LINE('',#257531,#257532); +#257531 = CARTESIAN_POINT('',(132.373961,-86.487336,1.545)); +#257532 = VECTOR('',#257533,1.); +#257533 = DIRECTION('',(0.707106596127,0.707106966246,0.)); +#257534 = ORIENTED_EDGE('',*,*,#257535,.F.); +#257535 = EDGE_CURVE('',#257536,#257528,#257538,.T.); +#257536 = VERTEX_POINT('',#257537); +#257537 = CARTESIAN_POINT('',(134.284443,-84.576853,1.51)); +#257538 = LINE('',#257539,#257540); +#257539 = CARTESIAN_POINT('',(134.284443,-84.576853,1.51)); +#257540 = VECTOR('',#257541,1.); +#257541 = DIRECTION('',(0.,0.,1.)); +#257542 = ORIENTED_EDGE('',*,*,#257543,.F.); +#257543 = EDGE_CURVE('',#257504,#257536,#257544,.T.); +#257544 = LINE('',#257545,#257546); +#257545 = CARTESIAN_POINT('',(132.373961,-86.487336,1.51)); +#257546 = VECTOR('',#257547,1.); +#257547 = DIRECTION('',(0.707106596127,0.707106966246,0.)); +#257548 = PLANE('',#257549); +#257549 = AXIS2_PLACEMENT_3D('',#257550,#257551,#257552); +#257550 = CARTESIAN_POINT('',(132.373961,-86.487336,1.51)); +#257551 = DIRECTION('',(-0.707106966246,0.707106596127,0.)); +#257552 = DIRECTION('',(0.707106596127,0.707106966246,0.)); +#257553 = ADVANCED_FACE('',(#257554),#257579,.T.); +#257554 = FACE_BOUND('',#257555,.T.); +#257555 = EDGE_LOOP('',(#257556,#257557,#257565,#257573)); +#257556 = ORIENTED_EDGE('',*,*,#257535,.T.); +#257557 = ORIENTED_EDGE('',*,*,#257558,.T.); +#257558 = EDGE_CURVE('',#257528,#257559,#257561,.T.); +#257559 = VERTEX_POINT('',#257560); +#257560 = CARTESIAN_POINT('',(134.320491,-84.561921,1.545)); +#257561 = LINE('',#257562,#257563); +#257562 = CARTESIAN_POINT('',(134.284443,-84.576853,1.545)); +#257563 = VECTOR('',#257564,1.); +#257564 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#257565 = ORIENTED_EDGE('',*,*,#257566,.F.); +#257566 = EDGE_CURVE('',#257567,#257559,#257569,.T.); +#257567 = VERTEX_POINT('',#257568); +#257568 = CARTESIAN_POINT('',(134.320491,-84.561921,1.51)); +#257569 = LINE('',#257570,#257571); +#257570 = CARTESIAN_POINT('',(134.320491,-84.561921,1.51)); +#257571 = VECTOR('',#257572,1.); +#257572 = DIRECTION('',(0.,0.,1.)); +#257573 = ORIENTED_EDGE('',*,*,#257574,.F.); +#257574 = EDGE_CURVE('',#257536,#257567,#257575,.T.); +#257575 = LINE('',#257576,#257577); +#257576 = CARTESIAN_POINT('',(134.284443,-84.576853,1.51)); +#257577 = VECTOR('',#257578,1.); +#257578 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#257579 = PLANE('',#257580); +#257580 = AXIS2_PLACEMENT_3D('',#257581,#257582,#257583); +#257581 = CARTESIAN_POINT('',(134.284443,-84.576853,1.51)); +#257582 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#257583 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#257584 = ADVANCED_FACE('',(#257585),#257610,.T.); +#257585 = FACE_BOUND('',#257586,.T.); +#257586 = EDGE_LOOP('',(#257587,#257588,#257596,#257604)); +#257587 = ORIENTED_EDGE('',*,*,#257566,.T.); +#257588 = ORIENTED_EDGE('',*,*,#257589,.T.); +#257589 = EDGE_CURVE('',#257559,#257590,#257592,.T.); +#257590 = VERTEX_POINT('',#257591); +#257591 = CARTESIAN_POINT('',(134.760633,-84.56,1.545)); +#257592 = LINE('',#257593,#257594); +#257593 = CARTESIAN_POINT('',(134.320491,-84.561921,1.545)); +#257594 = VECTOR('',#257595,1.); +#257595 = DIRECTION('',(0.999990475704,4.364458978744E-03,0.)); +#257596 = ORIENTED_EDGE('',*,*,#257597,.F.); +#257597 = EDGE_CURVE('',#257598,#257590,#257600,.T.); +#257598 = VERTEX_POINT('',#257599); +#257599 = CARTESIAN_POINT('',(134.760633,-84.56,1.51)); +#257600 = LINE('',#257601,#257602); +#257601 = CARTESIAN_POINT('',(134.760633,-84.56,1.51)); +#257602 = VECTOR('',#257603,1.); +#257603 = DIRECTION('',(0.,0.,1.)); +#257604 = ORIENTED_EDGE('',*,*,#257605,.F.); +#257605 = EDGE_CURVE('',#257567,#257598,#257606,.T.); +#257606 = LINE('',#257607,#257608); +#257607 = CARTESIAN_POINT('',(134.320491,-84.561921,1.51)); +#257608 = VECTOR('',#257609,1.); +#257609 = DIRECTION('',(0.999990475704,4.364458978744E-03,0.)); +#257610 = PLANE('',#257611); +#257611 = AXIS2_PLACEMENT_3D('',#257612,#257613,#257614); +#257612 = CARTESIAN_POINT('',(134.320491,-84.561921,1.51)); +#257613 = DIRECTION('',(-4.364458978744E-03,0.999990475704,0.)); +#257614 = DIRECTION('',(0.999990475704,4.364458978744E-03,0.)); +#257615 = ADVANCED_FACE('',(#257616),#257641,.T.); +#257616 = FACE_BOUND('',#257617,.T.); +#257617 = EDGE_LOOP('',(#257618,#257619,#257627,#257635)); +#257618 = ORIENTED_EDGE('',*,*,#257597,.T.); +#257619 = ORIENTED_EDGE('',*,*,#257620,.T.); +#257620 = EDGE_CURVE('',#257590,#257621,#257623,.T.); +#257621 = VERTEX_POINT('',#257622); +#257622 = CARTESIAN_POINT('',(135.146497,-84.176853,1.545)); +#257623 = LINE('',#257624,#257625); +#257624 = CARTESIAN_POINT('',(134.760633,-84.56,1.545)); +#257625 = VECTOR('',#257626,1.); +#257626 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#257627 = ORIENTED_EDGE('',*,*,#257628,.F.); +#257628 = EDGE_CURVE('',#257629,#257621,#257631,.T.); +#257629 = VERTEX_POINT('',#257630); +#257630 = CARTESIAN_POINT('',(135.146497,-84.176853,1.51)); +#257631 = LINE('',#257632,#257633); +#257632 = CARTESIAN_POINT('',(135.146497,-84.176853,1.51)); +#257633 = VECTOR('',#257634,1.); +#257634 = DIRECTION('',(0.,0.,1.)); +#257635 = ORIENTED_EDGE('',*,*,#257636,.F.); +#257636 = EDGE_CURVE('',#257598,#257629,#257637,.T.); +#257637 = LINE('',#257638,#257639); +#257638 = CARTESIAN_POINT('',(134.760633,-84.56,1.51)); +#257639 = VECTOR('',#257640,1.); +#257640 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#257641 = PLANE('',#257642); +#257642 = AXIS2_PLACEMENT_3D('',#257643,#257644,#257645); +#257643 = CARTESIAN_POINT('',(134.760633,-84.56,1.51)); +#257644 = DIRECTION('',(-0.70460409784,0.709600637899,0.)); +#257645 = DIRECTION('',(0.709600637899,0.70460409784,0.)); +#257646 = ADVANCED_FACE('',(#257647),#257672,.T.); +#257647 = FACE_BOUND('',#257648,.T.); +#257648 = EDGE_LOOP('',(#257649,#257650,#257658,#257666)); +#257649 = ORIENTED_EDGE('',*,*,#257628,.T.); +#257650 = ORIENTED_EDGE('',*,*,#257651,.T.); +#257651 = EDGE_CURVE('',#257621,#257652,#257654,.T.); +#257652 = VERTEX_POINT('',#257653); +#257653 = CARTESIAN_POINT('',(135.182546,-84.161921,1.545)); +#257654 = LINE('',#257655,#257656); +#257655 = CARTESIAN_POINT('',(135.146497,-84.176853,1.545)); +#257656 = VECTOR('',#257657,1.); +#257657 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#257658 = ORIENTED_EDGE('',*,*,#257659,.F.); +#257659 = EDGE_CURVE('',#257660,#257652,#257662,.T.); +#257660 = VERTEX_POINT('',#257661); +#257661 = CARTESIAN_POINT('',(135.182546,-84.161921,1.51)); +#257662 = LINE('',#257663,#257664); +#257663 = CARTESIAN_POINT('',(135.182546,-84.161921,1.51)); +#257664 = VECTOR('',#257665,1.); +#257665 = DIRECTION('',(0.,0.,1.)); +#257666 = ORIENTED_EDGE('',*,*,#257667,.F.); +#257667 = EDGE_CURVE('',#257629,#257660,#257668,.T.); +#257668 = LINE('',#257669,#257670); +#257669 = CARTESIAN_POINT('',(135.146497,-84.176853,1.51)); +#257670 = VECTOR('',#257671,1.); +#257671 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#257672 = PLANE('',#257673); +#257673 = AXIS2_PLACEMENT_3D('',#257674,#257675,#257676); +#257674 = CARTESIAN_POINT('',(135.146497,-84.176853,1.51)); +#257675 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#257676 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#257677 = ADVANCED_FACE('',(#257678),#257703,.T.); +#257678 = FACE_BOUND('',#257679,.T.); +#257679 = EDGE_LOOP('',(#257680,#257681,#257689,#257697)); +#257680 = ORIENTED_EDGE('',*,*,#257659,.T.); +#257681 = ORIENTED_EDGE('',*,*,#257682,.T.); +#257682 = EDGE_CURVE('',#257652,#257683,#257685,.T.); +#257683 = VERTEX_POINT('',#257684); +#257684 = CARTESIAN_POINT('',(135.864949,-84.16,1.545)); +#257685 = LINE('',#257686,#257687); +#257686 = CARTESIAN_POINT('',(135.182546,-84.161921,1.545)); +#257687 = VECTOR('',#257688,1.); +#257688 = DIRECTION('',(0.999996037764,2.815040948758E-03,0.)); +#257689 = ORIENTED_EDGE('',*,*,#257690,.F.); +#257690 = EDGE_CURVE('',#257691,#257683,#257693,.T.); +#257691 = VERTEX_POINT('',#257692); +#257692 = CARTESIAN_POINT('',(135.864949,-84.16,1.51)); +#257693 = LINE('',#257694,#257695); +#257694 = CARTESIAN_POINT('',(135.864949,-84.16,1.51)); +#257695 = VECTOR('',#257696,1.); +#257696 = DIRECTION('',(0.,0.,1.)); +#257697 = ORIENTED_EDGE('',*,*,#257698,.F.); +#257698 = EDGE_CURVE('',#257660,#257691,#257699,.T.); +#257699 = LINE('',#257700,#257701); +#257700 = CARTESIAN_POINT('',(135.182546,-84.161921,1.51)); +#257701 = VECTOR('',#257702,1.); +#257702 = DIRECTION('',(0.999996037764,2.815040948758E-03,0.)); +#257703 = PLANE('',#257704); +#257704 = AXIS2_PLACEMENT_3D('',#257705,#257706,#257707); +#257705 = CARTESIAN_POINT('',(135.182546,-84.161921,1.51)); +#257706 = DIRECTION('',(-2.815040948758E-03,0.999996037764,0.)); +#257707 = DIRECTION('',(0.999996037764,2.815040948758E-03,0.)); +#257708 = ADVANCED_FACE('',(#257709),#257734,.T.); +#257709 = FACE_BOUND('',#257710,.T.); +#257710 = EDGE_LOOP('',(#257711,#257712,#257720,#257728)); +#257711 = ORIENTED_EDGE('',*,*,#257690,.T.); +#257712 = ORIENTED_EDGE('',*,*,#257713,.T.); +#257713 = EDGE_CURVE('',#257683,#257714,#257716,.T.); +#257714 = VERTEX_POINT('',#257715); +#257715 = CARTESIAN_POINT('',(136.010814,-84.016852,1.545)); +#257716 = LINE('',#257717,#257718); +#257717 = CARTESIAN_POINT('',(135.864949,-84.16,1.545)); +#257718 = VECTOR('',#257719,1.); +#257719 = DIRECTION('',(0.71372272658,0.700428347201,0.)); +#257720 = ORIENTED_EDGE('',*,*,#257721,.F.); +#257721 = EDGE_CURVE('',#257722,#257714,#257724,.T.); +#257722 = VERTEX_POINT('',#257723); +#257723 = CARTESIAN_POINT('',(136.010814,-84.016852,1.51)); +#257724 = LINE('',#257725,#257726); +#257725 = CARTESIAN_POINT('',(136.010814,-84.016852,1.51)); +#257726 = VECTOR('',#257727,1.); +#257727 = DIRECTION('',(0.,0.,1.)); +#257728 = ORIENTED_EDGE('',*,*,#257729,.F.); +#257729 = EDGE_CURVE('',#257691,#257722,#257730,.T.); +#257730 = LINE('',#257731,#257732); +#257731 = CARTESIAN_POINT('',(135.864949,-84.16,1.51)); +#257732 = VECTOR('',#257733,1.); +#257733 = DIRECTION('',(0.71372272658,0.700428347201,0.)); +#257734 = PLANE('',#257735); +#257735 = AXIS2_PLACEMENT_3D('',#257736,#257737,#257738); +#257736 = CARTESIAN_POINT('',(135.864949,-84.16,1.51)); +#257737 = DIRECTION('',(-0.700428347201,0.71372272658,0.)); +#257738 = DIRECTION('',(0.71372272658,0.700428347201,0.)); +#257739 = ADVANCED_FACE('',(#257740),#257765,.T.); +#257740 = FACE_BOUND('',#257741,.T.); +#257741 = EDGE_LOOP('',(#257742,#257743,#257751,#257759)); +#257742 = ORIENTED_EDGE('',*,*,#257721,.T.); +#257743 = ORIENTED_EDGE('',*,*,#257744,.T.); +#257744 = EDGE_CURVE('',#257714,#257745,#257747,.T.); +#257745 = VERTEX_POINT('',#257746); +#257746 = CARTESIAN_POINT('',(136.046862,-84.001921,1.545)); +#257747 = LINE('',#257748,#257749); +#257748 = CARTESIAN_POINT('',(136.010814,-84.016852,1.545)); +#257749 = VECTOR('',#257750,1.); +#257750 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#257751 = ORIENTED_EDGE('',*,*,#257752,.F.); +#257752 = EDGE_CURVE('',#257753,#257745,#257755,.T.); +#257753 = VERTEX_POINT('',#257754); +#257754 = CARTESIAN_POINT('',(136.046862,-84.001921,1.51)); +#257755 = LINE('',#257756,#257757); +#257756 = CARTESIAN_POINT('',(136.046862,-84.001921,1.51)); +#257757 = VECTOR('',#257758,1.); +#257758 = DIRECTION('',(0.,0.,1.)); +#257759 = ORIENTED_EDGE('',*,*,#257760,.F.); +#257760 = EDGE_CURVE('',#257722,#257753,#257761,.T.); +#257761 = LINE('',#257762,#257763); +#257762 = CARTESIAN_POINT('',(136.010814,-84.016852,1.51)); +#257763 = VECTOR('',#257764,1.); +#257764 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#257765 = PLANE('',#257766); +#257766 = AXIS2_PLACEMENT_3D('',#257767,#257768,#257769); +#257767 = CARTESIAN_POINT('',(136.010814,-84.016852,1.51)); +#257768 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#257769 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#257770 = ADVANCED_FACE('',(#257771),#257796,.T.); +#257771 = FACE_BOUND('',#257772,.T.); +#257772 = EDGE_LOOP('',(#257773,#257774,#257782,#257790)); +#257773 = ORIENTED_EDGE('',*,*,#257752,.T.); +#257774 = ORIENTED_EDGE('',*,*,#257775,.T.); +#257775 = EDGE_CURVE('',#257745,#257776,#257778,.T.); +#257776 = VERTEX_POINT('',#257777); +#257777 = CARTESIAN_POINT('',(137.853578,-84.,1.545)); +#257778 = LINE('',#257779,#257780); +#257779 = CARTESIAN_POINT('',(136.046862,-84.001921,1.545)); +#257780 = VECTOR('',#257781,1.); +#257781 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#257782 = ORIENTED_EDGE('',*,*,#257783,.F.); +#257783 = EDGE_CURVE('',#257784,#257776,#257786,.T.); +#257784 = VERTEX_POINT('',#257785); +#257785 = CARTESIAN_POINT('',(137.853578,-84.,1.51)); +#257786 = LINE('',#257787,#257788); +#257787 = CARTESIAN_POINT('',(137.853578,-84.,1.51)); +#257788 = VECTOR('',#257789,1.); +#257789 = DIRECTION('',(0.,0.,1.)); +#257790 = ORIENTED_EDGE('',*,*,#257791,.F.); +#257791 = EDGE_CURVE('',#257753,#257784,#257792,.T.); +#257792 = LINE('',#257793,#257794); +#257793 = CARTESIAN_POINT('',(136.046862,-84.001921,1.51)); +#257794 = VECTOR('',#257795,1.); +#257795 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#257796 = PLANE('',#257797); +#257797 = AXIS2_PLACEMENT_3D('',#257798,#257799,#257800); +#257798 = CARTESIAN_POINT('',(136.046862,-84.001921,1.51)); +#257799 = DIRECTION('',(-1.063254498294E-03,0.999999434745,0.)); +#257800 = DIRECTION('',(0.999999434745,1.063254498294E-03,0.)); +#257801 = ADVANCED_FACE('',(#257802),#257827,.T.); +#257802 = FACE_BOUND('',#257803,.T.); +#257803 = EDGE_LOOP('',(#257804,#257805,#257813,#257821)); +#257804 = ORIENTED_EDGE('',*,*,#257783,.T.); +#257805 = ORIENTED_EDGE('',*,*,#257806,.T.); +#257806 = EDGE_CURVE('',#257776,#257807,#257809,.T.); +#257807 = VERTEX_POINT('',#257808); +#257808 = CARTESIAN_POINT('',(138.535,-83.318578,1.545)); +#257809 = LINE('',#257810,#257811); +#257810 = CARTESIAN_POINT('',(137.853578,-84.,1.545)); +#257811 = VECTOR('',#257812,1.); +#257812 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257813 = ORIENTED_EDGE('',*,*,#257814,.F.); +#257814 = EDGE_CURVE('',#257815,#257807,#257817,.T.); +#257815 = VERTEX_POINT('',#257816); +#257816 = CARTESIAN_POINT('',(138.535,-83.318578,1.51)); +#257817 = LINE('',#257818,#257819); +#257818 = CARTESIAN_POINT('',(138.535,-83.318578,1.51)); +#257819 = VECTOR('',#257820,1.); +#257820 = DIRECTION('',(0.,0.,1.)); +#257821 = ORIENTED_EDGE('',*,*,#257822,.F.); +#257822 = EDGE_CURVE('',#257784,#257815,#257823,.T.); +#257823 = LINE('',#257824,#257825); +#257824 = CARTESIAN_POINT('',(137.853578,-84.,1.51)); +#257825 = VECTOR('',#257826,1.); +#257826 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257827 = PLANE('',#257828); +#257828 = AXIS2_PLACEMENT_3D('',#257829,#257830,#257831); +#257829 = CARTESIAN_POINT('',(137.853578,-84.,1.51)); +#257830 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257831 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257832 = ADVANCED_FACE('',(#257833),#257858,.T.); +#257833 = FACE_BOUND('',#257834,.T.); +#257834 = EDGE_LOOP('',(#257835,#257836,#257844,#257852)); +#257835 = ORIENTED_EDGE('',*,*,#257814,.T.); +#257836 = ORIENTED_EDGE('',*,*,#257837,.T.); +#257837 = EDGE_CURVE('',#257807,#257838,#257840,.T.); +#257838 = VERTEX_POINT('',#257839); +#257839 = CARTESIAN_POINT('',(138.536921,-82.390491,1.545)); +#257840 = LINE('',#257841,#257842); +#257841 = CARTESIAN_POINT('',(138.535,-83.318578,1.545)); +#257842 = VECTOR('',#257843,1.); +#257843 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#257844 = ORIENTED_EDGE('',*,*,#257845,.F.); +#257845 = EDGE_CURVE('',#257846,#257838,#257848,.T.); +#257846 = VERTEX_POINT('',#257847); +#257847 = CARTESIAN_POINT('',(138.536921,-82.390491,1.51)); +#257848 = LINE('',#257849,#257850); +#257849 = CARTESIAN_POINT('',(138.536921,-82.390491,1.51)); +#257850 = VECTOR('',#257851,1.); +#257851 = DIRECTION('',(0.,0.,1.)); +#257852 = ORIENTED_EDGE('',*,*,#257853,.F.); +#257853 = EDGE_CURVE('',#257815,#257846,#257854,.T.); +#257854 = LINE('',#257855,#257856); +#257855 = CARTESIAN_POINT('',(138.535,-83.318578,1.51)); +#257856 = VECTOR('',#257857,1.); +#257857 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#257858 = PLANE('',#257859); +#257859 = AXIS2_PLACEMENT_3D('',#257860,#257861,#257862); +#257860 = CARTESIAN_POINT('',(138.535,-83.318578,1.51)); +#257861 = DIRECTION('',(-0.999997857869,2.069844621223E-03,0.)); +#257862 = DIRECTION('',(2.069844621223E-03,0.999997857869,0.)); +#257863 = ADVANCED_FACE('',(#257864),#257889,.T.); +#257864 = FACE_BOUND('',#257865,.T.); +#257865 = EDGE_LOOP('',(#257866,#257867,#257875,#257883)); +#257866 = ORIENTED_EDGE('',*,*,#257845,.T.); +#257867 = ORIENTED_EDGE('',*,*,#257868,.T.); +#257868 = EDGE_CURVE('',#257838,#257869,#257871,.T.); +#257869 = VERTEX_POINT('',#257870); +#257870 = CARTESIAN_POINT('',(138.551853,-82.354443,1.545)); +#257871 = LINE('',#257872,#257873); +#257872 = CARTESIAN_POINT('',(138.536921,-82.390491,1.545)); +#257873 = VECTOR('',#257874,1.); +#257874 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257875 = ORIENTED_EDGE('',*,*,#257876,.F.); +#257876 = EDGE_CURVE('',#257877,#257869,#257879,.T.); +#257877 = VERTEX_POINT('',#257878); +#257878 = CARTESIAN_POINT('',(138.551853,-82.354443,1.51)); +#257879 = LINE('',#257880,#257881); +#257880 = CARTESIAN_POINT('',(138.551853,-82.354443,1.51)); +#257881 = VECTOR('',#257882,1.); +#257882 = DIRECTION('',(0.,0.,1.)); +#257883 = ORIENTED_EDGE('',*,*,#257884,.F.); +#257884 = EDGE_CURVE('',#257846,#257877,#257885,.T.); +#257885 = LINE('',#257886,#257887); +#257886 = CARTESIAN_POINT('',(138.536921,-82.390491,1.51)); +#257887 = VECTOR('',#257888,1.); +#257888 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257889 = PLANE('',#257890); +#257890 = AXIS2_PLACEMENT_3D('',#257891,#257892,#257893); +#257891 = CARTESIAN_POINT('',(138.536921,-82.390491,1.51)); +#257892 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#257893 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#257894 = ADVANCED_FACE('',(#257895),#257911,.T.); +#257895 = FACE_BOUND('',#257896,.T.); +#257896 = EDGE_LOOP('',(#257897,#257898,#257904,#257905)); +#257897 = ORIENTED_EDGE('',*,*,#257876,.T.); +#257898 = ORIENTED_EDGE('',*,*,#257899,.T.); +#257899 = EDGE_CURVE('',#257869,#256615,#257900,.T.); +#257900 = LINE('',#257901,#257902); +#257901 = CARTESIAN_POINT('',(138.551853,-82.354443,1.545)); +#257902 = VECTOR('',#257903,1.); +#257903 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257904 = ORIENTED_EDGE('',*,*,#256612,.F.); +#257905 = ORIENTED_EDGE('',*,*,#257906,.F.); +#257906 = EDGE_CURVE('',#257877,#256613,#257907,.T.); +#257907 = LINE('',#257908,#257909); +#257908 = CARTESIAN_POINT('',(138.551853,-82.354443,1.51)); +#257909 = VECTOR('',#257910,1.); +#257910 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257911 = PLANE('',#257912); +#257912 = AXIS2_PLACEMENT_3D('',#257913,#257914,#257915); +#257913 = CARTESIAN_POINT('',(138.551853,-82.354443,1.51)); +#257914 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#257915 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#257916 = ADVANCED_FACE('',(#257917),#257944,.F.); +#257917 = FACE_BOUND('',#257918,.T.); +#257918 = EDGE_LOOP('',(#257919,#257929,#257936,#257937)); +#257919 = ORIENTED_EDGE('',*,*,#257920,.T.); +#257920 = EDGE_CURVE('',#257921,#257923,#257925,.T.); +#257921 = VERTEX_POINT('',#257922); +#257922 = CARTESIAN_POINT('',(136.737255,-125.8,1.51)); +#257923 = VERTEX_POINT('',#257924); +#257924 = CARTESIAN_POINT('',(136.737255,-125.8,1.545)); +#257925 = LINE('',#257926,#257927); +#257926 = CARTESIAN_POINT('',(136.737255,-125.8,1.51)); +#257927 = VECTOR('',#257928,1.); +#257928 = DIRECTION('',(0.,0.,1.)); +#257929 = ORIENTED_EDGE('',*,*,#257930,.T.); +#257930 = EDGE_CURVE('',#257923,#257923,#257931,.T.); +#257931 = CIRCLE('',#257932,0.137255); +#257932 = AXIS2_PLACEMENT_3D('',#257933,#257934,#257935); +#257933 = CARTESIAN_POINT('',(136.6,-125.8,1.545)); +#257934 = DIRECTION('',(0.,0.,1.)); +#257935 = DIRECTION('',(1.,0.,-0.)); +#257936 = ORIENTED_EDGE('',*,*,#257920,.F.); +#257937 = ORIENTED_EDGE('',*,*,#257938,.F.); +#257938 = EDGE_CURVE('',#257921,#257921,#257939,.T.); +#257939 = CIRCLE('',#257940,0.137255); +#257940 = AXIS2_PLACEMENT_3D('',#257941,#257942,#257943); +#257941 = CARTESIAN_POINT('',(136.6,-125.8,1.51)); +#257942 = DIRECTION('',(0.,0.,1.)); +#257943 = DIRECTION('',(1.,0.,-0.)); +#257944 = CYLINDRICAL_SURFACE('',#257945,0.137255); +#257945 = AXIS2_PLACEMENT_3D('',#257946,#257947,#257948); +#257946 = CARTESIAN_POINT('',(136.6,-125.8,1.51)); +#257947 = DIRECTION('',(-0.,-0.,-1.)); +#257948 = DIRECTION('',(1.,0.,-0.)); +#257949 = ADVANCED_FACE('',(#257950,#257994),#257997,.F.); +#257950 = FACE_BOUND('',#257951,.T.); +#257951 = EDGE_LOOP('',(#257952,#257953,#257954,#257955,#257956,#257957, + #257958,#257959,#257960,#257961,#257962,#257963,#257964,#257965, + #257966,#257967,#257968,#257969,#257970,#257971,#257972,#257973, + #257974,#257975,#257976,#257977,#257978,#257979,#257980,#257981, + #257982,#257983,#257984,#257985,#257986,#257987,#257988,#257989, + #257990,#257991,#257992,#257993)); +#257952 = ORIENTED_EDGE('',*,*,#256639,.T.); +#257953 = ORIENTED_EDGE('',*,*,#256671,.T.); +#257954 = ORIENTED_EDGE('',*,*,#256702,.T.); +#257955 = ORIENTED_EDGE('',*,*,#256733,.T.); +#257956 = ORIENTED_EDGE('',*,*,#256764,.T.); +#257957 = ORIENTED_EDGE('',*,*,#256795,.T.); +#257958 = ORIENTED_EDGE('',*,*,#256826,.T.); +#257959 = ORIENTED_EDGE('',*,*,#256857,.T.); +#257960 = ORIENTED_EDGE('',*,*,#256888,.T.); +#257961 = ORIENTED_EDGE('',*,*,#256919,.T.); +#257962 = ORIENTED_EDGE('',*,*,#256950,.T.); +#257963 = ORIENTED_EDGE('',*,*,#256981,.T.); +#257964 = ORIENTED_EDGE('',*,*,#257012,.T.); +#257965 = ORIENTED_EDGE('',*,*,#257043,.T.); +#257966 = ORIENTED_EDGE('',*,*,#257074,.T.); +#257967 = ORIENTED_EDGE('',*,*,#257105,.T.); +#257968 = ORIENTED_EDGE('',*,*,#257136,.T.); +#257969 = ORIENTED_EDGE('',*,*,#257167,.T.); +#257970 = ORIENTED_EDGE('',*,*,#257198,.T.); +#257971 = ORIENTED_EDGE('',*,*,#257229,.T.); +#257972 = ORIENTED_EDGE('',*,*,#257261,.T.); +#257973 = ORIENTED_EDGE('',*,*,#257293,.T.); +#257974 = ORIENTED_EDGE('',*,*,#257324,.T.); +#257975 = ORIENTED_EDGE('',*,*,#257355,.T.); +#257976 = ORIENTED_EDGE('',*,*,#257386,.T.); +#257977 = ORIENTED_EDGE('',*,*,#257417,.T.); +#257978 = ORIENTED_EDGE('',*,*,#257448,.T.); +#257979 = ORIENTED_EDGE('',*,*,#257479,.T.); +#257980 = ORIENTED_EDGE('',*,*,#257511,.T.); +#257981 = ORIENTED_EDGE('',*,*,#257543,.T.); +#257982 = ORIENTED_EDGE('',*,*,#257574,.T.); +#257983 = ORIENTED_EDGE('',*,*,#257605,.T.); +#257984 = ORIENTED_EDGE('',*,*,#257636,.T.); +#257985 = ORIENTED_EDGE('',*,*,#257667,.T.); +#257986 = ORIENTED_EDGE('',*,*,#257698,.T.); +#257987 = ORIENTED_EDGE('',*,*,#257729,.T.); +#257988 = ORIENTED_EDGE('',*,*,#257760,.T.); +#257989 = ORIENTED_EDGE('',*,*,#257791,.T.); +#257990 = ORIENTED_EDGE('',*,*,#257822,.T.); +#257991 = ORIENTED_EDGE('',*,*,#257853,.T.); +#257992 = ORIENTED_EDGE('',*,*,#257884,.T.); +#257993 = ORIENTED_EDGE('',*,*,#257906,.T.); +#257994 = FACE_BOUND('',#257995,.T.); +#257995 = EDGE_LOOP('',(#257996)); +#257996 = ORIENTED_EDGE('',*,*,#257938,.T.); +#257997 = PLANE('',#257998); +#257998 = AXIS2_PLACEMENT_3D('',#257999,#258000,#258001); +#257999 = CARTESIAN_POINT('',(0.,0.,1.51)); +#258000 = DIRECTION('',(0.,0.,1.)); +#258001 = DIRECTION('',(1.,0.,-0.)); +#258002 = ADVANCED_FACE('',(#258003,#258047),#258050,.T.); +#258003 = FACE_BOUND('',#258004,.F.); +#258004 = EDGE_LOOP('',(#258005,#258006,#258007,#258008,#258009,#258010, + #258011,#258012,#258013,#258014,#258015,#258016,#258017,#258018, + #258019,#258020,#258021,#258022,#258023,#258024,#258025,#258026, + #258027,#258028,#258029,#258030,#258031,#258032,#258033,#258034, + #258035,#258036,#258037,#258038,#258039,#258040,#258041,#258042, + #258043,#258044,#258045,#258046)); +#258005 = ORIENTED_EDGE('',*,*,#256622,.T.); +#258006 = ORIENTED_EDGE('',*,*,#256655,.T.); +#258007 = ORIENTED_EDGE('',*,*,#256686,.T.); +#258008 = ORIENTED_EDGE('',*,*,#256717,.T.); +#258009 = ORIENTED_EDGE('',*,*,#256748,.T.); +#258010 = ORIENTED_EDGE('',*,*,#256779,.T.); +#258011 = ORIENTED_EDGE('',*,*,#256810,.T.); +#258012 = ORIENTED_EDGE('',*,*,#256841,.T.); +#258013 = ORIENTED_EDGE('',*,*,#256872,.T.); +#258014 = ORIENTED_EDGE('',*,*,#256903,.T.); +#258015 = ORIENTED_EDGE('',*,*,#256934,.T.); +#258016 = ORIENTED_EDGE('',*,*,#256965,.T.); +#258017 = ORIENTED_EDGE('',*,*,#256996,.T.); +#258018 = ORIENTED_EDGE('',*,*,#257027,.T.); +#258019 = ORIENTED_EDGE('',*,*,#257058,.T.); +#258020 = ORIENTED_EDGE('',*,*,#257089,.T.); +#258021 = ORIENTED_EDGE('',*,*,#257120,.T.); +#258022 = ORIENTED_EDGE('',*,*,#257151,.T.); +#258023 = ORIENTED_EDGE('',*,*,#257182,.T.); +#258024 = ORIENTED_EDGE('',*,*,#257213,.T.); +#258025 = ORIENTED_EDGE('',*,*,#257244,.T.); +#258026 = ORIENTED_EDGE('',*,*,#257277,.T.); +#258027 = ORIENTED_EDGE('',*,*,#257308,.T.); +#258028 = ORIENTED_EDGE('',*,*,#257339,.T.); +#258029 = ORIENTED_EDGE('',*,*,#257370,.T.); +#258030 = ORIENTED_EDGE('',*,*,#257401,.T.); +#258031 = ORIENTED_EDGE('',*,*,#257432,.T.); +#258032 = ORIENTED_EDGE('',*,*,#257463,.T.); +#258033 = ORIENTED_EDGE('',*,*,#257494,.T.); +#258034 = ORIENTED_EDGE('',*,*,#257527,.T.); +#258035 = ORIENTED_EDGE('',*,*,#257558,.T.); +#258036 = ORIENTED_EDGE('',*,*,#257589,.T.); +#258037 = ORIENTED_EDGE('',*,*,#257620,.T.); +#258038 = ORIENTED_EDGE('',*,*,#257651,.T.); +#258039 = ORIENTED_EDGE('',*,*,#257682,.T.); +#258040 = ORIENTED_EDGE('',*,*,#257713,.T.); +#258041 = ORIENTED_EDGE('',*,*,#257744,.T.); +#258042 = ORIENTED_EDGE('',*,*,#257775,.T.); +#258043 = ORIENTED_EDGE('',*,*,#257806,.T.); +#258044 = ORIENTED_EDGE('',*,*,#257837,.T.); +#258045 = ORIENTED_EDGE('',*,*,#257868,.T.); +#258046 = ORIENTED_EDGE('',*,*,#257899,.T.); +#258047 = FACE_BOUND('',#258048,.F.); +#258048 = EDGE_LOOP('',(#258049)); +#258049 = ORIENTED_EDGE('',*,*,#257930,.T.); +#258050 = PLANE('',#258051); +#258051 = AXIS2_PLACEMENT_3D('',#258052,#258053,#258054); +#258052 = CARTESIAN_POINT('',(0.,0.,1.545)); +#258053 = DIRECTION('',(0.,0.,1.)); +#258054 = DIRECTION('',(1.,0.,-0.)); +#258055 = MANIFOLD_SOLID_BREP('',#258056); +#258056 = CLOSED_SHELL('',(#258057,#258097,#258128,#258159,#258190, + #258221,#258252,#258283,#258314,#258345,#258378,#258409,#258440, + #258471,#258502,#258533,#258566,#258588,#258621,#258654,#258685)); +#258057 = ADVANCED_FACE('',(#258058),#258092,.F.); +#258058 = FACE_BOUND('',#258059,.F.); +#258059 = EDGE_LOOP('',(#258060,#258070,#258078,#258086)); +#258060 = ORIENTED_EDGE('',*,*,#258061,.T.); +#258061 = EDGE_CURVE('',#258062,#258064,#258066,.T.); +#258062 = VERTEX_POINT('',#258063); +#258063 = CARTESIAN_POINT('',(136.881131,-125.7,0.)); +#258064 = VERTEX_POINT('',#258065); +#258065 = CARTESIAN_POINT('',(136.881131,-125.7,-3.5E-02)); +#258066 = LINE('',#258067,#258068); +#258067 = CARTESIAN_POINT('',(136.881131,-125.7,0.)); +#258068 = VECTOR('',#258069,1.); +#258069 = DIRECTION('',(0.,0.,-1.)); +#258070 = ORIENTED_EDGE('',*,*,#258071,.T.); +#258071 = EDGE_CURVE('',#258064,#258072,#258074,.T.); +#258072 = VERTEX_POINT('',#258073); +#258073 = CARTESIAN_POINT('',(141.755643,-125.701921,-3.5E-02)); +#258074 = LINE('',#258075,#258076); +#258075 = CARTESIAN_POINT('',(136.881131,-125.7,-3.5E-02)); +#258076 = VECTOR('',#258077,1.); +#258077 = DIRECTION('',(0.999999922346,-3.940907009405E-04,0.)); +#258078 = ORIENTED_EDGE('',*,*,#258079,.F.); +#258079 = EDGE_CURVE('',#258080,#258072,#258082,.T.); +#258080 = VERTEX_POINT('',#258081); +#258081 = CARTESIAN_POINT('',(141.755643,-125.701921,0.)); +#258082 = LINE('',#258083,#258084); +#258083 = CARTESIAN_POINT('',(141.755643,-125.701921,0.)); +#258084 = VECTOR('',#258085,1.); +#258085 = DIRECTION('',(0.,0.,-1.)); +#258086 = ORIENTED_EDGE('',*,*,#258087,.F.); +#258087 = EDGE_CURVE('',#258062,#258080,#258088,.T.); +#258088 = LINE('',#258089,#258090); +#258089 = CARTESIAN_POINT('',(136.881131,-125.7,0.)); +#258090 = VECTOR('',#258091,1.); +#258091 = DIRECTION('',(0.999999922346,-3.940907009405E-04,0.)); +#258092 = PLANE('',#258093); +#258093 = AXIS2_PLACEMENT_3D('',#258094,#258095,#258096); +#258094 = CARTESIAN_POINT('',(136.881131,-125.7,0.)); +#258095 = DIRECTION('',(-3.940907009405E-04,-0.999999922346,-0.)); +#258096 = DIRECTION('',(0.999999922346,-3.940907009405E-04,0.)); +#258097 = ADVANCED_FACE('',(#258098),#258123,.F.); +#258098 = FACE_BOUND('',#258099,.F.); +#258099 = EDGE_LOOP('',(#258100,#258101,#258109,#258117)); +#258100 = ORIENTED_EDGE('',*,*,#258079,.T.); +#258101 = ORIENTED_EDGE('',*,*,#258102,.T.); +#258102 = EDGE_CURVE('',#258072,#258103,#258105,.T.); +#258103 = VERTEX_POINT('',#258104); +#258104 = CARTESIAN_POINT('',(141.791691,-125.716853,-3.5E-02)); +#258105 = LINE('',#258106,#258107); +#258106 = CARTESIAN_POINT('',(141.755643,-125.701921,-3.5E-02)); +#258107 = VECTOR('',#258108,1.); +#258108 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#258109 = ORIENTED_EDGE('',*,*,#258110,.F.); +#258110 = EDGE_CURVE('',#258111,#258103,#258113,.T.); +#258111 = VERTEX_POINT('',#258112); +#258112 = CARTESIAN_POINT('',(141.791691,-125.716853,0.)); +#258113 = LINE('',#258114,#258115); +#258114 = CARTESIAN_POINT('',(141.791691,-125.716853,0.)); +#258115 = VECTOR('',#258116,1.); +#258116 = DIRECTION('',(0.,0.,-1.)); +#258117 = ORIENTED_EDGE('',*,*,#258118,.F.); +#258118 = EDGE_CURVE('',#258080,#258111,#258119,.T.); +#258119 = LINE('',#258120,#258121); +#258120 = CARTESIAN_POINT('',(141.755643,-125.701921,0.)); +#258121 = VECTOR('',#258122,1.); +#258122 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#258123 = PLANE('',#258124); +#258124 = AXIS2_PLACEMENT_3D('',#258125,#258126,#258127); +#258125 = CARTESIAN_POINT('',(141.755643,-125.701921,0.)); +#258126 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#258127 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#258128 = ADVANCED_FACE('',(#258129),#258154,.F.); +#258129 = FACE_BOUND('',#258130,.F.); +#258130 = EDGE_LOOP('',(#258131,#258132,#258140,#258148)); +#258131 = ORIENTED_EDGE('',*,*,#258110,.T.); +#258132 = ORIENTED_EDGE('',*,*,#258133,.T.); +#258133 = EDGE_CURVE('',#258103,#258134,#258136,.T.); +#258134 = VERTEX_POINT('',#258135); +#258135 = CARTESIAN_POINT('',(143.098647,-127.023809,-3.5E-02)); +#258136 = LINE('',#258137,#258138); +#258137 = CARTESIAN_POINT('',(141.791691,-125.716853,-3.5E-02)); +#258138 = VECTOR('',#258139,1.); +#258139 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#258140 = ORIENTED_EDGE('',*,*,#258141,.F.); +#258141 = EDGE_CURVE('',#258142,#258134,#258144,.T.); +#258142 = VERTEX_POINT('',#258143); +#258143 = CARTESIAN_POINT('',(143.098647,-127.023809,0.)); +#258144 = LINE('',#258145,#258146); +#258145 = CARTESIAN_POINT('',(143.098647,-127.023809,0.)); +#258146 = VECTOR('',#258147,1.); +#258147 = DIRECTION('',(0.,0.,-1.)); +#258148 = ORIENTED_EDGE('',*,*,#258149,.F.); +#258149 = EDGE_CURVE('',#258111,#258142,#258150,.T.); +#258150 = LINE('',#258151,#258152); +#258151 = CARTESIAN_POINT('',(141.791691,-125.716853,0.)); +#258152 = VECTOR('',#258153,1.); +#258153 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#258154 = PLANE('',#258155); +#258155 = AXIS2_PLACEMENT_3D('',#258156,#258157,#258158); +#258156 = CARTESIAN_POINT('',(141.791691,-125.716853,0.)); +#258157 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#258158 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#258159 = ADVANCED_FACE('',(#258160),#258185,.F.); +#258160 = FACE_BOUND('',#258161,.F.); +#258161 = EDGE_LOOP('',(#258162,#258163,#258171,#258179)); +#258162 = ORIENTED_EDGE('',*,*,#258141,.T.); +#258163 = ORIENTED_EDGE('',*,*,#258164,.T.); +#258164 = EDGE_CURVE('',#258134,#258165,#258167,.T.); +#258165 = VERTEX_POINT('',#258166); +#258166 = CARTESIAN_POINT('',(143.113579,-127.059857,-3.5E-02)); +#258167 = LINE('',#258168,#258169); +#258168 = CARTESIAN_POINT('',(143.098647,-127.023809,-3.5E-02)); +#258169 = VECTOR('',#258170,1.); +#258170 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#258171 = ORIENTED_EDGE('',*,*,#258172,.F.); +#258172 = EDGE_CURVE('',#258173,#258165,#258175,.T.); +#258173 = VERTEX_POINT('',#258174); +#258174 = CARTESIAN_POINT('',(143.113579,-127.059857,0.)); +#258175 = LINE('',#258176,#258177); +#258176 = CARTESIAN_POINT('',(143.113579,-127.059857,0.)); +#258177 = VECTOR('',#258178,1.); +#258178 = DIRECTION('',(0.,0.,-1.)); +#258179 = ORIENTED_EDGE('',*,*,#258180,.F.); +#258180 = EDGE_CURVE('',#258142,#258173,#258181,.T.); +#258181 = LINE('',#258182,#258183); +#258182 = CARTESIAN_POINT('',(143.098647,-127.023809,0.)); +#258183 = VECTOR('',#258184,1.); +#258184 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#258185 = PLANE('',#258186); +#258186 = AXIS2_PLACEMENT_3D('',#258187,#258188,#258189); +#258187 = CARTESIAN_POINT('',(143.098647,-127.023809,0.)); +#258188 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#258189 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#258190 = ADVANCED_FACE('',(#258191),#258216,.F.); +#258191 = FACE_BOUND('',#258192,.F.); +#258192 = EDGE_LOOP('',(#258193,#258194,#258202,#258210)); +#258193 = ORIENTED_EDGE('',*,*,#258172,.T.); +#258194 = ORIENTED_EDGE('',*,*,#258195,.T.); +#258195 = EDGE_CURVE('',#258165,#258196,#258198,.T.); +#258196 = VERTEX_POINT('',#258197); +#258197 = CARTESIAN_POINT('',(143.113579,-137.004009,-3.5E-02)); +#258198 = LINE('',#258199,#258200); +#258199 = CARTESIAN_POINT('',(143.113579,-127.059857,-3.5E-02)); +#258200 = VECTOR('',#258201,1.); +#258201 = DIRECTION('',(0.,-1.,0.)); +#258202 = ORIENTED_EDGE('',*,*,#258203,.F.); +#258203 = EDGE_CURVE('',#258204,#258196,#258206,.T.); +#258204 = VERTEX_POINT('',#258205); +#258205 = CARTESIAN_POINT('',(143.113579,-137.004009,0.)); +#258206 = LINE('',#258207,#258208); +#258207 = CARTESIAN_POINT('',(143.113579,-137.004009,0.)); +#258208 = VECTOR('',#258209,1.); +#258209 = DIRECTION('',(0.,0.,-1.)); +#258210 = ORIENTED_EDGE('',*,*,#258211,.F.); +#258211 = EDGE_CURVE('',#258173,#258204,#258212,.T.); +#258212 = LINE('',#258213,#258214); +#258213 = CARTESIAN_POINT('',(143.113579,-127.059857,0.)); +#258214 = VECTOR('',#258215,1.); +#258215 = DIRECTION('',(0.,-1.,0.)); +#258216 = PLANE('',#258217); +#258217 = AXIS2_PLACEMENT_3D('',#258218,#258219,#258220); +#258218 = CARTESIAN_POINT('',(143.113579,-127.059857,0.)); +#258219 = DIRECTION('',(-1.,-0.,-0.)); +#258220 = DIRECTION('',(0.,-1.,0.)); +#258221 = ADVANCED_FACE('',(#258222),#258247,.F.); +#258222 = FACE_BOUND('',#258223,.F.); +#258223 = EDGE_LOOP('',(#258224,#258225,#258233,#258241)); +#258224 = ORIENTED_EDGE('',*,*,#258203,.T.); +#258225 = ORIENTED_EDGE('',*,*,#258226,.T.); +#258226 = EDGE_CURVE('',#258196,#258227,#258229,.T.); +#258227 = VERTEX_POINT('',#258228); +#258228 = CARTESIAN_POINT('',(143.098647,-137.040057,-3.5E-02)); +#258229 = LINE('',#258230,#258231); +#258230 = CARTESIAN_POINT('',(143.113579,-137.004009,-3.5E-02)); +#258231 = VECTOR('',#258232,1.); +#258232 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#258233 = ORIENTED_EDGE('',*,*,#258234,.F.); +#258234 = EDGE_CURVE('',#258235,#258227,#258237,.T.); +#258235 = VERTEX_POINT('',#258236); +#258236 = CARTESIAN_POINT('',(143.098647,-137.040057,0.)); +#258237 = LINE('',#258238,#258239); +#258238 = CARTESIAN_POINT('',(143.098647,-137.040057,0.)); +#258239 = VECTOR('',#258240,1.); +#258240 = DIRECTION('',(0.,0.,-1.)); +#258241 = ORIENTED_EDGE('',*,*,#258242,.F.); +#258242 = EDGE_CURVE('',#258204,#258235,#258243,.T.); +#258243 = LINE('',#258244,#258245); +#258244 = CARTESIAN_POINT('',(143.113579,-137.004009,0.)); +#258245 = VECTOR('',#258246,1.); +#258246 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#258247 = PLANE('',#258248); +#258248 = AXIS2_PLACEMENT_3D('',#258249,#258250,#258251); +#258249 = CARTESIAN_POINT('',(143.113579,-137.004009,0.)); +#258250 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#258251 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#258252 = ADVANCED_FACE('',(#258253),#258278,.F.); +#258253 = FACE_BOUND('',#258254,.F.); +#258254 = EDGE_LOOP('',(#258255,#258256,#258264,#258272)); +#258255 = ORIENTED_EDGE('',*,*,#258234,.T.); +#258256 = ORIENTED_EDGE('',*,*,#258257,.T.); +#258257 = EDGE_CURVE('',#258227,#258258,#258260,.T.); +#258258 = VERTEX_POINT('',#258259); +#258259 = CARTESIAN_POINT('',(134.882628,-145.261994,-3.5E-02)); +#258260 = LINE('',#258261,#258262); +#258261 = CARTESIAN_POINT('',(143.098647,-137.040057,-3.5E-02)); +#258262 = VECTOR('',#258263,1.); +#258263 = DIRECTION('',(-0.706852162489,-0.707361308232,0.)); +#258264 = ORIENTED_EDGE('',*,*,#258265,.F.); +#258265 = EDGE_CURVE('',#258266,#258258,#258268,.T.); +#258266 = VERTEX_POINT('',#258267); +#258267 = CARTESIAN_POINT('',(134.882628,-145.261994,0.)); +#258268 = LINE('',#258269,#258270); +#258269 = CARTESIAN_POINT('',(134.882628,-145.261994,0.)); +#258270 = VECTOR('',#258271,1.); +#258271 = DIRECTION('',(0.,0.,-1.)); +#258272 = ORIENTED_EDGE('',*,*,#258273,.F.); +#258273 = EDGE_CURVE('',#258235,#258266,#258274,.T.); +#258274 = LINE('',#258275,#258276); +#258275 = CARTESIAN_POINT('',(143.098647,-137.040057,0.)); +#258276 = VECTOR('',#258277,1.); +#258277 = DIRECTION('',(-0.706852162489,-0.707361308232,0.)); +#258278 = PLANE('',#258279); +#258279 = AXIS2_PLACEMENT_3D('',#258280,#258281,#258282); +#258280 = CARTESIAN_POINT('',(143.098647,-137.040057,0.)); +#258281 = DIRECTION('',(-0.707361308232,0.706852162489,0.)); +#258282 = DIRECTION('',(-0.706852162489,-0.707361308232,0.)); +#258283 = ADVANCED_FACE('',(#258284),#258309,.F.); +#258284 = FACE_BOUND('',#258285,.F.); +#258285 = EDGE_LOOP('',(#258286,#258287,#258295,#258303)); +#258286 = ORIENTED_EDGE('',*,*,#258265,.T.); +#258287 = ORIENTED_EDGE('',*,*,#258288,.T.); +#258288 = EDGE_CURVE('',#258258,#258289,#258291,.T.); +#258289 = VERTEX_POINT('',#258290); +#258290 = CARTESIAN_POINT('',(134.938006,-145.317372,-3.5E-02)); +#258291 = LINE('',#258292,#258293); +#258292 = CARTESIAN_POINT('',(134.882628,-145.261994,-3.5E-02)); +#258293 = VECTOR('',#258294,1.); +#258294 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#258295 = ORIENTED_EDGE('',*,*,#258296,.F.); +#258296 = EDGE_CURVE('',#258297,#258289,#258299,.T.); +#258297 = VERTEX_POINT('',#258298); +#258298 = CARTESIAN_POINT('',(134.938006,-145.317372,0.)); +#258299 = LINE('',#258300,#258301); +#258300 = CARTESIAN_POINT('',(134.938006,-145.317372,0.)); +#258301 = VECTOR('',#258302,1.); +#258302 = DIRECTION('',(0.,0.,-1.)); +#258303 = ORIENTED_EDGE('',*,*,#258304,.F.); +#258304 = EDGE_CURVE('',#258266,#258297,#258305,.T.); +#258305 = LINE('',#258306,#258307); +#258306 = CARTESIAN_POINT('',(134.882628,-145.261994,0.)); +#258307 = VECTOR('',#258308,1.); +#258308 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#258309 = PLANE('',#258310); +#258310 = AXIS2_PLACEMENT_3D('',#258311,#258312,#258313); +#258311 = CARTESIAN_POINT('',(134.882628,-145.261994,0.)); +#258312 = DIRECTION('',(-0.707106781187,-0.707106781186,-0.)); +#258313 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#258314 = ADVANCED_FACE('',(#258315),#258340,.F.); +#258315 = FACE_BOUND('',#258316,.F.); +#258316 = EDGE_LOOP('',(#258317,#258318,#258326,#258334)); +#258317 = ORIENTED_EDGE('',*,*,#258296,.T.); +#258318 = ORIENTED_EDGE('',*,*,#258319,.T.); +#258319 = EDGE_CURVE('',#258289,#258320,#258322,.T.); +#258320 = VERTEX_POINT('',#258321); +#258321 = CARTESIAN_POINT('',(134.977164,-145.385195,-3.5E-02)); +#258322 = LINE('',#258323,#258324); +#258323 = CARTESIAN_POINT('',(134.938006,-145.317372,-3.5E-02)); +#258324 = VECTOR('',#258325,1.); +#258325 = DIRECTION('',(0.500003569146,-0.866023343127,0.)); +#258326 = ORIENTED_EDGE('',*,*,#258327,.F.); +#258327 = EDGE_CURVE('',#258328,#258320,#258330,.T.); +#258328 = VERTEX_POINT('',#258329); +#258329 = CARTESIAN_POINT('',(134.977164,-145.385195,0.)); +#258330 = LINE('',#258331,#258332); +#258331 = CARTESIAN_POINT('',(134.977164,-145.385195,0.)); +#258332 = VECTOR('',#258333,1.); +#258333 = DIRECTION('',(0.,0.,-1.)); +#258334 = ORIENTED_EDGE('',*,*,#258335,.F.); +#258335 = EDGE_CURVE('',#258297,#258328,#258336,.T.); +#258336 = LINE('',#258337,#258338); +#258337 = CARTESIAN_POINT('',(134.938006,-145.317372,0.)); +#258338 = VECTOR('',#258339,1.); +#258339 = DIRECTION('',(0.500003569146,-0.866023343127,0.)); +#258340 = PLANE('',#258341); +#258341 = AXIS2_PLACEMENT_3D('',#258342,#258343,#258344); +#258342 = CARTESIAN_POINT('',(134.938006,-145.317372,0.)); +#258343 = DIRECTION('',(-0.866023343127,-0.500003569146,-0.)); +#258344 = DIRECTION('',(0.500003569146,-0.866023343127,0.)); +#258345 = ADVANCED_FACE('',(#258346),#258373,.T.); +#258346 = FACE_BOUND('',#258347,.F.); +#258347 = EDGE_LOOP('',(#258348,#258349,#258358,#258366)); +#258348 = ORIENTED_EDGE('',*,*,#258327,.T.); +#258349 = ORIENTED_EDGE('',*,*,#258350,.T.); +#258350 = EDGE_CURVE('',#258320,#258351,#258353,.T.); +#258351 = VERTEX_POINT('',#258352); +#258352 = CARTESIAN_POINT('',(134.654242,-145.204335,-3.5E-02)); +#258353 = CIRCLE('',#258354,0.29973840631); +#258354 = AXIS2_PLACEMENT_3D('',#258355,#258356,#258357); +#258355 = CARTESIAN_POINT('',(134.70048481697,-145.5004848169,-3.5E-02) + ); +#258356 = DIRECTION('',(0.,0.,-1.)); +#258357 = DIRECTION('',(0.923068840026,0.384634783363,0.)); +#258358 = ORIENTED_EDGE('',*,*,#258359,.F.); +#258359 = EDGE_CURVE('',#258360,#258351,#258362,.T.); +#258360 = VERTEX_POINT('',#258361); +#258361 = CARTESIAN_POINT('',(134.654242,-145.204335,0.)); +#258362 = LINE('',#258363,#258364); +#258363 = CARTESIAN_POINT('',(134.654242,-145.204335,0.)); +#258364 = VECTOR('',#258365,1.); +#258365 = DIRECTION('',(0.,0.,-1.)); +#258366 = ORIENTED_EDGE('',*,*,#258367,.F.); +#258367 = EDGE_CURVE('',#258328,#258360,#258368,.T.); +#258368 = CIRCLE('',#258369,0.29973840631); +#258369 = AXIS2_PLACEMENT_3D('',#258370,#258371,#258372); +#258370 = CARTESIAN_POINT('',(134.70048481697,-145.5004848169,0.)); +#258371 = DIRECTION('',(0.,0.,-1.)); +#258372 = DIRECTION('',(0.923068840026,0.384634783363,0.)); +#258373 = CYLINDRICAL_SURFACE('',#258374,0.29973840631); +#258374 = AXIS2_PLACEMENT_3D('',#258375,#258376,#258377); +#258375 = CARTESIAN_POINT('',(134.70048481697,-145.5004848169,0.)); +#258376 = DIRECTION('',(-0.,-0.,1.)); +#258377 = DIRECTION('',(0.923068840026,0.384634783363,0.)); +#258378 = ADVANCED_FACE('',(#258379),#258404,.F.); +#258379 = FACE_BOUND('',#258380,.F.); +#258380 = EDGE_LOOP('',(#258381,#258382,#258390,#258398)); +#258381 = ORIENTED_EDGE('',*,*,#258359,.T.); +#258382 = ORIENTED_EDGE('',*,*,#258383,.T.); +#258383 = EDGE_CURVE('',#258351,#258384,#258386,.T.); +#258384 = VERTEX_POINT('',#258385); +#258385 = CARTESIAN_POINT('',(142.9155,-136.943078,-3.5E-02)); +#258386 = LINE('',#258387,#258388); +#258387 = CARTESIAN_POINT('',(134.654242,-145.204335,-3.5E-02)); +#258388 = VECTOR('',#258389,1.); +#258389 = DIRECTION('',(0.707106823983,0.70710673839,0.)); +#258390 = ORIENTED_EDGE('',*,*,#258391,.F.); +#258391 = EDGE_CURVE('',#258392,#258384,#258394,.T.); +#258392 = VERTEX_POINT('',#258393); +#258393 = CARTESIAN_POINT('',(142.9155,-136.943078,0.)); +#258394 = LINE('',#258395,#258396); +#258395 = CARTESIAN_POINT('',(142.9155,-136.943078,0.)); +#258396 = VECTOR('',#258397,1.); +#258397 = DIRECTION('',(0.,0.,-1.)); +#258398 = ORIENTED_EDGE('',*,*,#258399,.F.); +#258399 = EDGE_CURVE('',#258360,#258392,#258400,.T.); +#258400 = LINE('',#258401,#258402); +#258401 = CARTESIAN_POINT('',(134.654242,-145.204335,0.)); +#258402 = VECTOR('',#258403,1.); +#258403 = DIRECTION('',(0.707106823983,0.70710673839,0.)); +#258404 = PLANE('',#258405); +#258405 = AXIS2_PLACEMENT_3D('',#258406,#258407,#258408); +#258406 = CARTESIAN_POINT('',(134.654242,-145.204335,0.)); +#258407 = DIRECTION('',(0.70710673839,-0.707106823983,0.)); +#258408 = DIRECTION('',(0.707106823983,0.70710673839,0.)); +#258409 = ADVANCED_FACE('',(#258410),#258435,.F.); +#258410 = FACE_BOUND('',#258411,.F.); +#258411 = EDGE_LOOP('',(#258412,#258413,#258421,#258429)); +#258412 = ORIENTED_EDGE('',*,*,#258391,.T.); +#258413 = ORIENTED_EDGE('',*,*,#258414,.T.); +#258414 = EDGE_CURVE('',#258384,#258415,#258417,.T.); +#258415 = VERTEX_POINT('',#258416); +#258416 = CARTESIAN_POINT('',(142.9155,-127.120788,-3.5E-02)); +#258417 = LINE('',#258418,#258419); +#258418 = CARTESIAN_POINT('',(142.9155,-136.943078,-3.5E-02)); +#258419 = VECTOR('',#258420,1.); +#258420 = DIRECTION('',(0.,1.,0.)); +#258421 = ORIENTED_EDGE('',*,*,#258422,.F.); +#258422 = EDGE_CURVE('',#258423,#258415,#258425,.T.); +#258423 = VERTEX_POINT('',#258424); +#258424 = CARTESIAN_POINT('',(142.9155,-127.120788,0.)); +#258425 = LINE('',#258426,#258427); +#258426 = CARTESIAN_POINT('',(142.9155,-127.120788,0.)); +#258427 = VECTOR('',#258428,1.); +#258428 = DIRECTION('',(0.,0.,-1.)); +#258429 = ORIENTED_EDGE('',*,*,#258430,.F.); +#258430 = EDGE_CURVE('',#258392,#258423,#258431,.T.); +#258431 = LINE('',#258432,#258433); +#258432 = CARTESIAN_POINT('',(142.9155,-136.943078,0.)); +#258433 = VECTOR('',#258434,1.); +#258434 = DIRECTION('',(0.,1.,0.)); +#258435 = PLANE('',#258436); +#258436 = AXIS2_PLACEMENT_3D('',#258437,#258438,#258439); +#258437 = CARTESIAN_POINT('',(142.9155,-136.943078,0.)); +#258438 = DIRECTION('',(1.,-0.,0.)); +#258439 = DIRECTION('',(0.,1.,0.)); +#258440 = ADVANCED_FACE('',(#258441),#258466,.F.); +#258441 = FACE_BOUND('',#258442,.F.); +#258442 = EDGE_LOOP('',(#258443,#258444,#258452,#258460)); +#258443 = ORIENTED_EDGE('',*,*,#258422,.T.); +#258444 = ORIENTED_EDGE('',*,*,#258445,.T.); +#258445 = EDGE_CURVE('',#258415,#258446,#258448,.T.); +#258446 = VERTEX_POINT('',#258447); +#258447 = CARTESIAN_POINT('',(141.694712,-125.9,-3.5E-02)); +#258448 = LINE('',#258449,#258450); +#258449 = CARTESIAN_POINT('',(142.9155,-127.120788,-3.5E-02)); +#258450 = VECTOR('',#258451,1.); +#258451 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258452 = ORIENTED_EDGE('',*,*,#258453,.F.); +#258453 = EDGE_CURVE('',#258454,#258446,#258456,.T.); +#258454 = VERTEX_POINT('',#258455); +#258455 = CARTESIAN_POINT('',(141.694712,-125.9,0.)); +#258456 = LINE('',#258457,#258458); +#258457 = CARTESIAN_POINT('',(141.694712,-125.9,0.)); +#258458 = VECTOR('',#258459,1.); +#258459 = DIRECTION('',(0.,0.,-1.)); +#258460 = ORIENTED_EDGE('',*,*,#258461,.F.); +#258461 = EDGE_CURVE('',#258423,#258454,#258462,.T.); +#258462 = LINE('',#258463,#258464); +#258463 = CARTESIAN_POINT('',(142.9155,-127.120788,0.)); +#258464 = VECTOR('',#258465,1.); +#258465 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258466 = PLANE('',#258467); +#258467 = AXIS2_PLACEMENT_3D('',#258468,#258469,#258470); +#258468 = CARTESIAN_POINT('',(142.9155,-127.120788,0.)); +#258469 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#258470 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258471 = ADVANCED_FACE('',(#258472),#258497,.F.); +#258472 = FACE_BOUND('',#258473,.F.); +#258473 = EDGE_LOOP('',(#258474,#258475,#258483,#258491)); +#258474 = ORIENTED_EDGE('',*,*,#258453,.T.); +#258475 = ORIENTED_EDGE('',*,*,#258476,.T.); +#258476 = EDGE_CURVE('',#258446,#258477,#258479,.T.); +#258477 = VERTEX_POINT('',#258478); +#258478 = CARTESIAN_POINT('',(136.881131,-125.9,-3.5E-02)); +#258479 = LINE('',#258480,#258481); +#258480 = CARTESIAN_POINT('',(141.694712,-125.9,-3.5E-02)); +#258481 = VECTOR('',#258482,1.); +#258482 = DIRECTION('',(-1.,0.,0.)); +#258483 = ORIENTED_EDGE('',*,*,#258484,.F.); +#258484 = EDGE_CURVE('',#258485,#258477,#258487,.T.); +#258485 = VERTEX_POINT('',#258486); +#258486 = CARTESIAN_POINT('',(136.881131,-125.9,0.)); +#258487 = LINE('',#258488,#258489); +#258488 = CARTESIAN_POINT('',(136.881131,-125.9,0.)); +#258489 = VECTOR('',#258490,1.); +#258490 = DIRECTION('',(0.,0.,-1.)); +#258491 = ORIENTED_EDGE('',*,*,#258492,.F.); +#258492 = EDGE_CURVE('',#258454,#258485,#258493,.T.); +#258493 = LINE('',#258494,#258495); +#258494 = CARTESIAN_POINT('',(141.694712,-125.9,0.)); +#258495 = VECTOR('',#258496,1.); +#258496 = DIRECTION('',(-1.,0.,0.)); +#258497 = PLANE('',#258498); +#258498 = AXIS2_PLACEMENT_3D('',#258499,#258500,#258501); +#258499 = CARTESIAN_POINT('',(141.694712,-125.9,0.)); +#258500 = DIRECTION('',(0.,1.,0.)); +#258501 = DIRECTION('',(-1.,0.,0.)); +#258502 = ADVANCED_FACE('',(#258503),#258528,.F.); +#258503 = FACE_BOUND('',#258504,.F.); +#258504 = EDGE_LOOP('',(#258505,#258506,#258514,#258522)); +#258505 = ORIENTED_EDGE('',*,*,#258484,.T.); +#258506 = ORIENTED_EDGE('',*,*,#258507,.T.); +#258507 = EDGE_CURVE('',#258477,#258508,#258510,.T.); +#258508 = VERTEX_POINT('',#258509); +#258509 = CARTESIAN_POINT('',(136.877164,-125.914805,-3.5E-02)); +#258510 = LINE('',#258511,#258512); +#258511 = CARTESIAN_POINT('',(136.881131,-125.9,-3.5E-02)); +#258512 = VECTOR('',#258513,1.); +#258513 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#258514 = ORIENTED_EDGE('',*,*,#258515,.F.); +#258515 = EDGE_CURVE('',#258516,#258508,#258518,.T.); +#258516 = VERTEX_POINT('',#258517); +#258517 = CARTESIAN_POINT('',(136.877164,-125.914805,0.)); +#258518 = LINE('',#258519,#258520); +#258519 = CARTESIAN_POINT('',(136.877164,-125.914805,0.)); +#258520 = VECTOR('',#258521,1.); +#258521 = DIRECTION('',(0.,0.,-1.)); +#258522 = ORIENTED_EDGE('',*,*,#258523,.F.); +#258523 = EDGE_CURVE('',#258485,#258516,#258524,.T.); +#258524 = LINE('',#258525,#258526); +#258525 = CARTESIAN_POINT('',(136.881131,-125.9,0.)); +#258526 = VECTOR('',#258527,1.); +#258527 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#258528 = PLANE('',#258529); +#258529 = AXIS2_PLACEMENT_3D('',#258530,#258531,#258532); +#258530 = CARTESIAN_POINT('',(136.881131,-125.9,0.)); +#258531 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#258532 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#258533 = ADVANCED_FACE('',(#258534),#258561,.T.); +#258534 = FACE_BOUND('',#258535,.F.); +#258535 = EDGE_LOOP('',(#258536,#258537,#258546,#258554)); +#258536 = ORIENTED_EDGE('',*,*,#258515,.T.); +#258537 = ORIENTED_EDGE('',*,*,#258538,.T.); +#258538 = EDGE_CURVE('',#258508,#258539,#258541,.T.); +#258539 = VERTEX_POINT('',#258540); +#258540 = CARTESIAN_POINT('',(136.877164,-125.685195,-3.5E-02)); +#258541 = CIRCLE('',#258542,0.299999888633); +#258542 = AXIS2_PLACEMENT_3D('',#258543,#258544,#258545); +#258543 = CARTESIAN_POINT('',(136.60000024848,-125.8,-3.5E-02)); +#258544 = DIRECTION('',(-0.,0.,-1.)); +#258545 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#258546 = ORIENTED_EDGE('',*,*,#258547,.F.); +#258547 = EDGE_CURVE('',#258548,#258539,#258550,.T.); +#258548 = VERTEX_POINT('',#258549); +#258549 = CARTESIAN_POINT('',(136.877164,-125.685195,0.)); +#258550 = LINE('',#258551,#258552); +#258551 = CARTESIAN_POINT('',(136.877164,-125.685195,0.)); +#258552 = VECTOR('',#258553,1.); +#258553 = DIRECTION('',(0.,0.,-1.)); +#258554 = ORIENTED_EDGE('',*,*,#258555,.F.); +#258555 = EDGE_CURVE('',#258516,#258548,#258556,.T.); +#258556 = CIRCLE('',#258557,0.299999888633); +#258557 = AXIS2_PLACEMENT_3D('',#258558,#258559,#258560); +#258558 = CARTESIAN_POINT('',(136.60000024848,-125.8,0.)); +#258559 = DIRECTION('',(-0.,0.,-1.)); +#258560 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#258561 = CYLINDRICAL_SURFACE('',#258562,0.299999888633); +#258562 = AXIS2_PLACEMENT_3D('',#258563,#258564,#258565); +#258563 = CARTESIAN_POINT('',(136.60000024848,-125.8,0.)); +#258564 = DIRECTION('',(0.,-0.,1.)); +#258565 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#258566 = ADVANCED_FACE('',(#258567),#258583,.F.); +#258567 = FACE_BOUND('',#258568,.F.); +#258568 = EDGE_LOOP('',(#258569,#258570,#258576,#258577)); +#258569 = ORIENTED_EDGE('',*,*,#258547,.T.); +#258570 = ORIENTED_EDGE('',*,*,#258571,.T.); +#258571 = EDGE_CURVE('',#258539,#258064,#258572,.T.); +#258572 = LINE('',#258573,#258574); +#258573 = CARTESIAN_POINT('',(136.877164,-125.685195,-3.5E-02)); +#258574 = VECTOR('',#258575,1.); +#258575 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#258576 = ORIENTED_EDGE('',*,*,#258061,.F.); +#258577 = ORIENTED_EDGE('',*,*,#258578,.F.); +#258578 = EDGE_CURVE('',#258548,#258062,#258579,.T.); +#258579 = LINE('',#258580,#258581); +#258580 = CARTESIAN_POINT('',(136.877164,-125.685195,0.)); +#258581 = VECTOR('',#258582,1.); +#258582 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#258583 = PLANE('',#258584); +#258584 = AXIS2_PLACEMENT_3D('',#258585,#258586,#258587); +#258585 = CARTESIAN_POINT('',(136.877164,-125.685195,0.)); +#258586 = DIRECTION('',(-0.965925627198,-0.258819788119,-0.)); +#258587 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#258588 = ADVANCED_FACE('',(#258589),#258616,.F.); +#258589 = FACE_BOUND('',#258590,.F.); +#258590 = EDGE_LOOP('',(#258591,#258601,#258608,#258609)); +#258591 = ORIENTED_EDGE('',*,*,#258592,.T.); +#258592 = EDGE_CURVE('',#258593,#258595,#258597,.T.); +#258593 = VERTEX_POINT('',#258594); +#258594 = CARTESIAN_POINT('',(134.837255,-145.5,0.)); +#258595 = VERTEX_POINT('',#258596); +#258596 = CARTESIAN_POINT('',(134.837255,-145.5,-3.5E-02)); +#258597 = LINE('',#258598,#258599); +#258598 = CARTESIAN_POINT('',(134.837255,-145.5,0.)); +#258599 = VECTOR('',#258600,1.); +#258600 = DIRECTION('',(0.,0.,-1.)); +#258601 = ORIENTED_EDGE('',*,*,#258602,.T.); +#258602 = EDGE_CURVE('',#258595,#258595,#258603,.T.); +#258603 = CIRCLE('',#258604,0.137255); +#258604 = AXIS2_PLACEMENT_3D('',#258605,#258606,#258607); +#258605 = CARTESIAN_POINT('',(134.7,-145.5,-3.5E-02)); +#258606 = DIRECTION('',(0.,0.,1.)); +#258607 = DIRECTION('',(1.,0.,-0.)); +#258608 = ORIENTED_EDGE('',*,*,#258592,.F.); +#258609 = ORIENTED_EDGE('',*,*,#258610,.F.); +#258610 = EDGE_CURVE('',#258593,#258593,#258611,.T.); +#258611 = CIRCLE('',#258612,0.137255); +#258612 = AXIS2_PLACEMENT_3D('',#258613,#258614,#258615); +#258613 = CARTESIAN_POINT('',(134.7,-145.5,0.)); +#258614 = DIRECTION('',(0.,0.,1.)); +#258615 = DIRECTION('',(1.,0.,-0.)); +#258616 = CYLINDRICAL_SURFACE('',#258617,0.137255); +#258617 = AXIS2_PLACEMENT_3D('',#258618,#258619,#258620); +#258618 = CARTESIAN_POINT('',(134.7,-145.5,0.)); +#258619 = DIRECTION('',(0.,0.,1.)); +#258620 = DIRECTION('',(1.,0.,-0.)); +#258621 = ADVANCED_FACE('',(#258622),#258649,.F.); +#258622 = FACE_BOUND('',#258623,.F.); +#258623 = EDGE_LOOP('',(#258624,#258634,#258641,#258642)); +#258624 = ORIENTED_EDGE('',*,*,#258625,.T.); +#258625 = EDGE_CURVE('',#258626,#258628,#258630,.T.); +#258626 = VERTEX_POINT('',#258627); +#258627 = CARTESIAN_POINT('',(136.737255,-125.8,0.)); +#258628 = VERTEX_POINT('',#258629); +#258629 = CARTESIAN_POINT('',(136.737255,-125.8,-3.5E-02)); +#258630 = LINE('',#258631,#258632); +#258631 = CARTESIAN_POINT('',(136.737255,-125.8,0.)); +#258632 = VECTOR('',#258633,1.); +#258633 = DIRECTION('',(0.,0.,-1.)); +#258634 = ORIENTED_EDGE('',*,*,#258635,.T.); +#258635 = EDGE_CURVE('',#258628,#258628,#258636,.T.); +#258636 = CIRCLE('',#258637,0.137255); +#258637 = AXIS2_PLACEMENT_3D('',#258638,#258639,#258640); +#258638 = CARTESIAN_POINT('',(136.6,-125.8,-3.5E-02)); +#258639 = DIRECTION('',(0.,0.,1.)); +#258640 = DIRECTION('',(1.,0.,-0.)); +#258641 = ORIENTED_EDGE('',*,*,#258625,.F.); +#258642 = ORIENTED_EDGE('',*,*,#258643,.F.); +#258643 = EDGE_CURVE('',#258626,#258626,#258644,.T.); +#258644 = CIRCLE('',#258645,0.137255); +#258645 = AXIS2_PLACEMENT_3D('',#258646,#258647,#258648); +#258646 = CARTESIAN_POINT('',(136.6,-125.8,0.)); +#258647 = DIRECTION('',(0.,0.,1.)); +#258648 = DIRECTION('',(1.,0.,-0.)); +#258649 = CYLINDRICAL_SURFACE('',#258650,0.137255); +#258650 = AXIS2_PLACEMENT_3D('',#258651,#258652,#258653); +#258651 = CARTESIAN_POINT('',(136.6,-125.8,0.)); +#258652 = DIRECTION('',(0.,0.,1.)); +#258653 = DIRECTION('',(1.,0.,-0.)); +#258654 = ADVANCED_FACE('',(#258655,#258674,#258677),#258680,.F.); +#258655 = FACE_BOUND('',#258656,.F.); +#258656 = EDGE_LOOP('',(#258657,#258658,#258659,#258660,#258661,#258662, + #258663,#258664,#258665,#258666,#258667,#258668,#258669,#258670, + #258671,#258672,#258673)); +#258657 = ORIENTED_EDGE('',*,*,#258087,.T.); +#258658 = ORIENTED_EDGE('',*,*,#258118,.T.); +#258659 = ORIENTED_EDGE('',*,*,#258149,.T.); +#258660 = ORIENTED_EDGE('',*,*,#258180,.T.); +#258661 = ORIENTED_EDGE('',*,*,#258211,.T.); +#258662 = ORIENTED_EDGE('',*,*,#258242,.T.); +#258663 = ORIENTED_EDGE('',*,*,#258273,.T.); +#258664 = ORIENTED_EDGE('',*,*,#258304,.T.); +#258665 = ORIENTED_EDGE('',*,*,#258335,.T.); +#258666 = ORIENTED_EDGE('',*,*,#258367,.T.); +#258667 = ORIENTED_EDGE('',*,*,#258399,.T.); +#258668 = ORIENTED_EDGE('',*,*,#258430,.T.); +#258669 = ORIENTED_EDGE('',*,*,#258461,.T.); +#258670 = ORIENTED_EDGE('',*,*,#258492,.T.); +#258671 = ORIENTED_EDGE('',*,*,#258523,.T.); +#258672 = ORIENTED_EDGE('',*,*,#258555,.T.); +#258673 = ORIENTED_EDGE('',*,*,#258578,.T.); +#258674 = FACE_BOUND('',#258675,.F.); +#258675 = EDGE_LOOP('',(#258676)); +#258676 = ORIENTED_EDGE('',*,*,#258610,.T.); +#258677 = FACE_BOUND('',#258678,.F.); +#258678 = EDGE_LOOP('',(#258679)); +#258679 = ORIENTED_EDGE('',*,*,#258643,.T.); +#258680 = PLANE('',#258681); +#258681 = AXIS2_PLACEMENT_3D('',#258682,#258683,#258684); +#258682 = CARTESIAN_POINT('',(0.,0.,0.)); +#258683 = DIRECTION('',(-0.,-0.,-1.)); +#258684 = DIRECTION('',(-1.,0.,0.)); +#258685 = ADVANCED_FACE('',(#258686,#258705,#258708),#258711,.T.); +#258686 = FACE_BOUND('',#258687,.T.); +#258687 = EDGE_LOOP('',(#258688,#258689,#258690,#258691,#258692,#258693, + #258694,#258695,#258696,#258697,#258698,#258699,#258700,#258701, + #258702,#258703,#258704)); +#258688 = ORIENTED_EDGE('',*,*,#258071,.T.); +#258689 = ORIENTED_EDGE('',*,*,#258102,.T.); +#258690 = ORIENTED_EDGE('',*,*,#258133,.T.); +#258691 = ORIENTED_EDGE('',*,*,#258164,.T.); +#258692 = ORIENTED_EDGE('',*,*,#258195,.T.); +#258693 = ORIENTED_EDGE('',*,*,#258226,.T.); +#258694 = ORIENTED_EDGE('',*,*,#258257,.T.); +#258695 = ORIENTED_EDGE('',*,*,#258288,.T.); +#258696 = ORIENTED_EDGE('',*,*,#258319,.T.); +#258697 = ORIENTED_EDGE('',*,*,#258350,.T.); +#258698 = ORIENTED_EDGE('',*,*,#258383,.T.); +#258699 = ORIENTED_EDGE('',*,*,#258414,.T.); +#258700 = ORIENTED_EDGE('',*,*,#258445,.T.); +#258701 = ORIENTED_EDGE('',*,*,#258476,.T.); +#258702 = ORIENTED_EDGE('',*,*,#258507,.T.); +#258703 = ORIENTED_EDGE('',*,*,#258538,.T.); +#258704 = ORIENTED_EDGE('',*,*,#258571,.T.); +#258705 = FACE_BOUND('',#258706,.T.); +#258706 = EDGE_LOOP('',(#258707)); +#258707 = ORIENTED_EDGE('',*,*,#258602,.T.); +#258708 = FACE_BOUND('',#258709,.T.); +#258709 = EDGE_LOOP('',(#258710)); +#258710 = ORIENTED_EDGE('',*,*,#258635,.T.); +#258711 = PLANE('',#258712); +#258712 = AXIS2_PLACEMENT_3D('',#258713,#258714,#258715); +#258713 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#258714 = DIRECTION('',(-0.,-0.,-1.)); +#258715 = DIRECTION('',(-1.,0.,0.)); +#258716 = MANIFOLD_SOLID_BREP('',#258717); +#258717 = CLOSED_SHELL('',(#258718,#258758,#258789,#258820,#258851, + #258882,#258913,#258944,#258977,#259008,#259041,#259072,#259103, + #259134,#259165,#259198,#259220,#259244)); +#258718 = ADVANCED_FACE('',(#258719),#258753,.F.); +#258719 = FACE_BOUND('',#258720,.F.); +#258720 = EDGE_LOOP('',(#258721,#258731,#258739,#258747)); +#258721 = ORIENTED_EDGE('',*,*,#258722,.T.); +#258722 = EDGE_CURVE('',#258723,#258725,#258727,.T.); +#258723 = VERTEX_POINT('',#258724); +#258724 = CARTESIAN_POINT('',(134.624721,-109.716665,0.)); +#258725 = VERTEX_POINT('',#258726); +#258726 = CARTESIAN_POINT('',(134.624721,-109.716665,-3.5E-02)); +#258727 = LINE('',#258728,#258729); +#258728 = CARTESIAN_POINT('',(134.624721,-109.716665,0.)); +#258729 = VECTOR('',#258730,1.); +#258730 = DIRECTION('',(0.,0.,-1.)); +#258731 = ORIENTED_EDGE('',*,*,#258732,.T.); +#258732 = EDGE_CURVE('',#258725,#258733,#258735,.T.); +#258733 = VERTEX_POINT('',#258734); +#258734 = CARTESIAN_POINT('',(134.647118,-109.770736,-3.5E-02)); +#258735 = LINE('',#258736,#258737); +#258736 = CARTESIAN_POINT('',(134.624721,-109.716665,-3.5E-02)); +#258737 = VECTOR('',#258738,1.); +#258738 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#258739 = ORIENTED_EDGE('',*,*,#258740,.F.); +#258740 = EDGE_CURVE('',#258741,#258733,#258743,.T.); +#258741 = VERTEX_POINT('',#258742); +#258742 = CARTESIAN_POINT('',(134.647118,-109.770736,0.)); +#258743 = LINE('',#258744,#258745); +#258744 = CARTESIAN_POINT('',(134.647118,-109.770736,0.)); +#258745 = VECTOR('',#258746,1.); +#258746 = DIRECTION('',(0.,0.,-1.)); +#258747 = ORIENTED_EDGE('',*,*,#258748,.F.); +#258748 = EDGE_CURVE('',#258723,#258741,#258749,.T.); +#258749 = LINE('',#258750,#258751); +#258750 = CARTESIAN_POINT('',(134.624721,-109.716665,0.)); +#258751 = VECTOR('',#258752,1.); +#258752 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#258753 = PLANE('',#258754); +#258754 = AXIS2_PLACEMENT_3D('',#258755,#258756,#258757); +#258755 = CARTESIAN_POINT('',(134.624721,-109.716665,0.)); +#258756 = DIRECTION('',(-0.923879179303,-0.382684285085,-0.)); +#258757 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#258758 = ADVANCED_FACE('',(#258759),#258784,.F.); +#258759 = FACE_BOUND('',#258760,.F.); +#258760 = EDGE_LOOP('',(#258761,#258762,#258770,#258778)); +#258761 = ORIENTED_EDGE('',*,*,#258740,.T.); +#258762 = ORIENTED_EDGE('',*,*,#258763,.T.); +#258763 = EDGE_CURVE('',#258733,#258764,#258766,.T.); +#258764 = VERTEX_POINT('',#258765); +#258765 = CARTESIAN_POINT('',(134.647118,-112.029263,-3.5E-02)); +#258766 = LINE('',#258767,#258768); +#258767 = CARTESIAN_POINT('',(134.647118,-109.770736,-3.5E-02)); +#258768 = VECTOR('',#258769,1.); +#258769 = DIRECTION('',(0.,-1.,0.)); +#258770 = ORIENTED_EDGE('',*,*,#258771,.F.); +#258771 = EDGE_CURVE('',#258772,#258764,#258774,.T.); +#258772 = VERTEX_POINT('',#258773); +#258773 = CARTESIAN_POINT('',(134.647118,-112.029263,0.)); +#258774 = LINE('',#258775,#258776); +#258775 = CARTESIAN_POINT('',(134.647118,-112.029263,0.)); +#258776 = VECTOR('',#258777,1.); +#258777 = DIRECTION('',(0.,0.,-1.)); +#258778 = ORIENTED_EDGE('',*,*,#258779,.F.); +#258779 = EDGE_CURVE('',#258741,#258772,#258780,.T.); +#258780 = LINE('',#258781,#258782); +#258781 = CARTESIAN_POINT('',(134.647118,-109.770736,0.)); +#258782 = VECTOR('',#258783,1.); +#258783 = DIRECTION('',(0.,-1.,0.)); +#258784 = PLANE('',#258785); +#258785 = AXIS2_PLACEMENT_3D('',#258786,#258787,#258788); +#258786 = CARTESIAN_POINT('',(134.647118,-109.770736,0.)); +#258787 = DIRECTION('',(-1.,-0.,-0.)); +#258788 = DIRECTION('',(0.,-1.,0.)); +#258789 = ADVANCED_FACE('',(#258790),#258815,.F.); +#258790 = FACE_BOUND('',#258791,.F.); +#258791 = EDGE_LOOP('',(#258792,#258793,#258801,#258809)); +#258792 = ORIENTED_EDGE('',*,*,#258771,.T.); +#258793 = ORIENTED_EDGE('',*,*,#258794,.T.); +#258794 = EDGE_CURVE('',#258764,#258795,#258797,.T.); +#258795 = VERTEX_POINT('',#258796); +#258796 = CARTESIAN_POINT('',(134.624721,-112.083335,-3.5E-02)); +#258797 = LINE('',#258798,#258799); +#258798 = CARTESIAN_POINT('',(134.647118,-112.029263,-3.5E-02)); +#258799 = VECTOR('',#258800,1.); +#258800 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#258801 = ORIENTED_EDGE('',*,*,#258802,.F.); +#258802 = EDGE_CURVE('',#258803,#258795,#258805,.T.); +#258803 = VERTEX_POINT('',#258804); +#258804 = CARTESIAN_POINT('',(134.624721,-112.083335,0.)); +#258805 = LINE('',#258806,#258807); +#258806 = CARTESIAN_POINT('',(134.624721,-112.083335,0.)); +#258807 = VECTOR('',#258808,1.); +#258808 = DIRECTION('',(0.,0.,-1.)); +#258809 = ORIENTED_EDGE('',*,*,#258810,.F.); +#258810 = EDGE_CURVE('',#258772,#258803,#258811,.T.); +#258811 = LINE('',#258812,#258813); +#258812 = CARTESIAN_POINT('',(134.647118,-112.029263,0.)); +#258813 = VECTOR('',#258814,1.); +#258814 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#258815 = PLANE('',#258816); +#258816 = AXIS2_PLACEMENT_3D('',#258817,#258818,#258819); +#258817 = CARTESIAN_POINT('',(134.647118,-112.029263,0.)); +#258818 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#258819 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#258820 = ADVANCED_FACE('',(#258821),#258846,.F.); +#258821 = FACE_BOUND('',#258822,.F.); +#258822 = EDGE_LOOP('',(#258823,#258824,#258832,#258840)); +#258823 = ORIENTED_EDGE('',*,*,#258802,.T.); +#258824 = ORIENTED_EDGE('',*,*,#258825,.T.); +#258825 = EDGE_CURVE('',#258795,#258826,#258828,.T.); +#258826 = VERTEX_POINT('',#258827); +#258827 = CARTESIAN_POINT('',(132.823335,-113.884721,-3.5E-02)); +#258828 = LINE('',#258829,#258830); +#258829 = CARTESIAN_POINT('',(134.624721,-112.083335,-3.5E-02)); +#258830 = VECTOR('',#258831,1.); +#258831 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#258832 = ORIENTED_EDGE('',*,*,#258833,.F.); +#258833 = EDGE_CURVE('',#258834,#258826,#258836,.T.); +#258834 = VERTEX_POINT('',#258835); +#258835 = CARTESIAN_POINT('',(132.823335,-113.884721,0.)); +#258836 = LINE('',#258837,#258838); +#258837 = CARTESIAN_POINT('',(132.823335,-113.884721,0.)); +#258838 = VECTOR('',#258839,1.); +#258839 = DIRECTION('',(0.,0.,-1.)); +#258840 = ORIENTED_EDGE('',*,*,#258841,.F.); +#258841 = EDGE_CURVE('',#258803,#258834,#258842,.T.); +#258842 = LINE('',#258843,#258844); +#258843 = CARTESIAN_POINT('',(134.624721,-112.083335,0.)); +#258844 = VECTOR('',#258845,1.); +#258845 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#258846 = PLANE('',#258847); +#258847 = AXIS2_PLACEMENT_3D('',#258848,#258849,#258850); +#258848 = CARTESIAN_POINT('',(134.624721,-112.083335,0.)); +#258849 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#258850 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#258851 = ADVANCED_FACE('',(#258852),#258877,.F.); +#258852 = FACE_BOUND('',#258853,.F.); +#258853 = EDGE_LOOP('',(#258854,#258855,#258863,#258871)); +#258854 = ORIENTED_EDGE('',*,*,#258833,.T.); +#258855 = ORIENTED_EDGE('',*,*,#258856,.T.); +#258856 = EDGE_CURVE('',#258826,#258857,#258859,.T.); +#258857 = VERTEX_POINT('',#258858); +#258858 = CARTESIAN_POINT('',(132.769264,-113.907118,-3.5E-02)); +#258859 = LINE('',#258860,#258861); +#258860 = CARTESIAN_POINT('',(132.823335,-113.884721,-3.5E-02)); +#258861 = VECTOR('',#258862,1.); +#258862 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#258863 = ORIENTED_EDGE('',*,*,#258864,.F.); +#258864 = EDGE_CURVE('',#258865,#258857,#258867,.T.); +#258865 = VERTEX_POINT('',#258866); +#258866 = CARTESIAN_POINT('',(132.769264,-113.907118,0.)); +#258867 = LINE('',#258868,#258869); +#258868 = CARTESIAN_POINT('',(132.769264,-113.907118,0.)); +#258869 = VECTOR('',#258870,1.); +#258870 = DIRECTION('',(0.,0.,-1.)); +#258871 = ORIENTED_EDGE('',*,*,#258872,.F.); +#258872 = EDGE_CURVE('',#258834,#258865,#258873,.T.); +#258873 = LINE('',#258874,#258875); +#258874 = CARTESIAN_POINT('',(132.823335,-113.884721,0.)); +#258875 = VECTOR('',#258876,1.); +#258876 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#258877 = PLANE('',#258878); +#258878 = AXIS2_PLACEMENT_3D('',#258879,#258880,#258881); +#258879 = CARTESIAN_POINT('',(132.823335,-113.884721,0.)); +#258880 = DIRECTION('',(-0.382684285085,0.923879179303,0.)); +#258881 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#258882 = ADVANCED_FACE('',(#258883),#258908,.F.); +#258883 = FACE_BOUND('',#258884,.F.); +#258884 = EDGE_LOOP('',(#258885,#258886,#258894,#258902)); +#258885 = ORIENTED_EDGE('',*,*,#258864,.T.); +#258886 = ORIENTED_EDGE('',*,*,#258887,.T.); +#258887 = EDGE_CURVE('',#258857,#258888,#258890,.T.); +#258888 = VERTEX_POINT('',#258889); +#258889 = CARTESIAN_POINT('',(122.675,-113.91,-3.5E-02)); +#258890 = LINE('',#258891,#258892); +#258891 = CARTESIAN_POINT('',(132.769264,-113.907118,-3.5E-02)); +#258892 = VECTOR('',#258893,1.); +#258893 = DIRECTION('',(-0.999999959242,-2.85508669333E-04,0.)); +#258894 = ORIENTED_EDGE('',*,*,#258895,.F.); +#258895 = EDGE_CURVE('',#258896,#258888,#258898,.T.); +#258896 = VERTEX_POINT('',#258897); +#258897 = CARTESIAN_POINT('',(122.675,-113.91,0.)); +#258898 = LINE('',#258899,#258900); +#258899 = CARTESIAN_POINT('',(122.675,-113.91,0.)); +#258900 = VECTOR('',#258901,1.); +#258901 = DIRECTION('',(0.,0.,-1.)); +#258902 = ORIENTED_EDGE('',*,*,#258903,.F.); +#258903 = EDGE_CURVE('',#258865,#258896,#258904,.T.); +#258904 = LINE('',#258905,#258906); +#258905 = CARTESIAN_POINT('',(132.769264,-113.907118,0.)); +#258906 = VECTOR('',#258907,1.); +#258907 = DIRECTION('',(-0.999999959242,-2.85508669333E-04,0.)); +#258908 = PLANE('',#258909); +#258909 = AXIS2_PLACEMENT_3D('',#258910,#258911,#258912); +#258910 = CARTESIAN_POINT('',(132.769264,-113.907118,0.)); +#258911 = DIRECTION('',(-2.85508669333E-04,0.999999959242,0.)); +#258912 = DIRECTION('',(-0.999999959242,-2.85508669333E-04,0.)); +#258913 = ADVANCED_FACE('',(#258914),#258939,.F.); +#258914 = FACE_BOUND('',#258915,.F.); +#258915 = EDGE_LOOP('',(#258916,#258917,#258925,#258933)); +#258916 = ORIENTED_EDGE('',*,*,#258895,.T.); +#258917 = ORIENTED_EDGE('',*,*,#258918,.T.); +#258918 = EDGE_CURVE('',#258888,#258919,#258921,.T.); +#258919 = VERTEX_POINT('',#258920); +#258920 = CARTESIAN_POINT('',(122.672118,-114.769264,-3.5E-02)); +#258921 = LINE('',#258922,#258923); +#258922 = CARTESIAN_POINT('',(122.675,-113.91,-3.5E-02)); +#258923 = VECTOR('',#258924,1.); +#258924 = DIRECTION('',(-3.354014353622E-03,-0.999994375278,0.)); +#258925 = ORIENTED_EDGE('',*,*,#258926,.F.); +#258926 = EDGE_CURVE('',#258927,#258919,#258929,.T.); +#258927 = VERTEX_POINT('',#258928); +#258928 = CARTESIAN_POINT('',(122.672118,-114.769264,0.)); +#258929 = LINE('',#258930,#258931); +#258930 = CARTESIAN_POINT('',(122.672118,-114.769264,0.)); +#258931 = VECTOR('',#258932,1.); +#258932 = DIRECTION('',(0.,0.,-1.)); +#258933 = ORIENTED_EDGE('',*,*,#258934,.F.); +#258934 = EDGE_CURVE('',#258896,#258927,#258935,.T.); +#258935 = LINE('',#258936,#258937); +#258936 = CARTESIAN_POINT('',(122.675,-113.91,0.)); +#258937 = VECTOR('',#258938,1.); +#258938 = DIRECTION('',(-3.354014353622E-03,-0.999994375278,0.)); +#258939 = PLANE('',#258940); +#258940 = AXIS2_PLACEMENT_3D('',#258941,#258942,#258943); +#258941 = CARTESIAN_POINT('',(122.675,-113.91,0.)); +#258942 = DIRECTION('',(-0.999994375278,3.354014353622E-03,0.)); +#258943 = DIRECTION('',(-3.354014353622E-03,-0.999994375278,0.)); +#258944 = ADVANCED_FACE('',(#258945),#258972,.T.); +#258945 = FACE_BOUND('',#258946,.F.); +#258946 = EDGE_LOOP('',(#258947,#258948,#258957,#258965)); +#258947 = ORIENTED_EDGE('',*,*,#258926,.T.); +#258948 = ORIENTED_EDGE('',*,*,#258949,.T.); +#258949 = EDGE_CURVE('',#258919,#258950,#258952,.T.); +#258950 = VERTEX_POINT('',#258951); +#258951 = CARTESIAN_POINT('',(122.377882,-114.769264,-3.5E-02)); +#258952 = CIRCLE('',#258953,0.150000292066); +#258953 = AXIS2_PLACEMENT_3D('',#258954,#258955,#258956); +#258954 = CARTESIAN_POINT('',(122.525,-114.74,-3.5E-02)); +#258955 = DIRECTION('',(-0.,0.,-1.)); +#258956 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#258957 = ORIENTED_EDGE('',*,*,#258958,.F.); +#258958 = EDGE_CURVE('',#258959,#258950,#258961,.T.); +#258959 = VERTEX_POINT('',#258960); +#258960 = CARTESIAN_POINT('',(122.377882,-114.769264,0.)); +#258961 = LINE('',#258962,#258963); +#258962 = CARTESIAN_POINT('',(122.377882,-114.769264,0.)); +#258963 = VECTOR('',#258964,1.); +#258964 = DIRECTION('',(0.,0.,-1.)); +#258965 = ORIENTED_EDGE('',*,*,#258966,.F.); +#258966 = EDGE_CURVE('',#258927,#258959,#258967,.T.); +#258967 = CIRCLE('',#258968,0.150000292066); +#258968 = AXIS2_PLACEMENT_3D('',#258969,#258970,#258971); +#258969 = CARTESIAN_POINT('',(122.525,-114.74,0.)); +#258970 = DIRECTION('',(-0.,0.,-1.)); +#258971 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#258972 = CYLINDRICAL_SURFACE('',#258973,0.150000292066); +#258973 = AXIS2_PLACEMENT_3D('',#258974,#258975,#258976); +#258974 = CARTESIAN_POINT('',(122.525,-114.74,0.)); +#258975 = DIRECTION('',(0.,-0.,1.)); +#258976 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#258977 = ADVANCED_FACE('',(#258978),#259003,.F.); +#258978 = FACE_BOUND('',#258979,.F.); +#258979 = EDGE_LOOP('',(#258980,#258981,#258989,#258997)); +#258980 = ORIENTED_EDGE('',*,*,#258958,.T.); +#258981 = ORIENTED_EDGE('',*,*,#258982,.T.); +#258982 = EDGE_CURVE('',#258950,#258983,#258985,.T.); +#258983 = VERTEX_POINT('',#258984); +#258984 = CARTESIAN_POINT('',(122.377882,-113.730736,-3.5E-02)); +#258985 = LINE('',#258986,#258987); +#258986 = CARTESIAN_POINT('',(122.377882,-114.769264,-3.5E-02)); +#258987 = VECTOR('',#258988,1.); +#258988 = DIRECTION('',(0.,1.,0.)); +#258989 = ORIENTED_EDGE('',*,*,#258990,.F.); +#258990 = EDGE_CURVE('',#258991,#258983,#258993,.T.); +#258991 = VERTEX_POINT('',#258992); +#258992 = CARTESIAN_POINT('',(122.377882,-113.730736,0.)); +#258993 = LINE('',#258994,#258995); +#258994 = CARTESIAN_POINT('',(122.377882,-113.730736,0.)); +#258995 = VECTOR('',#258996,1.); +#258996 = DIRECTION('',(0.,0.,-1.)); +#258997 = ORIENTED_EDGE('',*,*,#258998,.F.); +#258998 = EDGE_CURVE('',#258959,#258991,#258999,.T.); +#258999 = LINE('',#259000,#259001); +#259000 = CARTESIAN_POINT('',(122.377882,-114.769264,0.)); +#259001 = VECTOR('',#259002,1.); +#259002 = DIRECTION('',(0.,1.,0.)); +#259003 = PLANE('',#259004); +#259004 = AXIS2_PLACEMENT_3D('',#259005,#259006,#259007); +#259005 = CARTESIAN_POINT('',(122.377882,-114.769264,0.)); +#259006 = DIRECTION('',(1.,-0.,0.)); +#259007 = DIRECTION('',(0.,1.,0.)); +#259008 = ADVANCED_FACE('',(#259009),#259036,.T.); +#259009 = FACE_BOUND('',#259010,.F.); +#259010 = EDGE_LOOP('',(#259011,#259012,#259021,#259029)); +#259011 = ORIENTED_EDGE('',*,*,#258990,.T.); +#259012 = ORIENTED_EDGE('',*,*,#259013,.T.); +#259013 = EDGE_CURVE('',#258983,#259014,#259016,.T.); +#259014 = VERTEX_POINT('',#259015); +#259015 = CARTESIAN_POINT('',(122.495736,-113.612882,-3.5E-02)); +#259016 = CIRCLE('',#259017,0.150002525551); +#259017 = AXIS2_PLACEMENT_3D('',#259018,#259019,#259020); +#259018 = CARTESIAN_POINT('',(122.52500189941,-113.7600018994,-3.5E-02) + ); +#259019 = DIRECTION('',(0.,0.,-1.)); +#259020 = DIRECTION('',(-0.980782815972,0.19510271114,0.)); +#259021 = ORIENTED_EDGE('',*,*,#259022,.F.); +#259022 = EDGE_CURVE('',#259023,#259014,#259025,.T.); +#259023 = VERTEX_POINT('',#259024); +#259024 = CARTESIAN_POINT('',(122.495736,-113.612882,0.)); +#259025 = LINE('',#259026,#259027); +#259026 = CARTESIAN_POINT('',(122.495736,-113.612882,0.)); +#259027 = VECTOR('',#259028,1.); +#259028 = DIRECTION('',(0.,0.,-1.)); +#259029 = ORIENTED_EDGE('',*,*,#259030,.F.); +#259030 = EDGE_CURVE('',#258991,#259023,#259031,.T.); +#259031 = CIRCLE('',#259032,0.150002525551); +#259032 = AXIS2_PLACEMENT_3D('',#259033,#259034,#259035); +#259033 = CARTESIAN_POINT('',(122.52500189941,-113.7600018994,0.)); +#259034 = DIRECTION('',(0.,0.,-1.)); +#259035 = DIRECTION('',(-0.980782815972,0.19510271114,0.)); +#259036 = CYLINDRICAL_SURFACE('',#259037,0.150002525551); +#259037 = AXIS2_PLACEMENT_3D('',#259038,#259039,#259040); +#259038 = CARTESIAN_POINT('',(122.52500189941,-113.7600018994,0.)); +#259039 = DIRECTION('',(-0.,-0.,1.)); +#259040 = DIRECTION('',(-0.980782815972,0.19510271114,0.)); +#259041 = ADVANCED_FACE('',(#259042),#259067,.F.); +#259042 = FACE_BOUND('',#259043,.F.); +#259043 = EDGE_LOOP('',(#259044,#259045,#259053,#259061)); +#259044 = ORIENTED_EDGE('',*,*,#259022,.T.); +#259045 = ORIENTED_EDGE('',*,*,#259046,.T.); +#259046 = EDGE_CURVE('',#259014,#259047,#259049,.T.); +#259047 = VERTEX_POINT('',#259048); +#259048 = CARTESIAN_POINT('',(132.677868,-113.61,-3.5E-02)); +#259049 = LINE('',#259050,#259051); +#259050 = CARTESIAN_POINT('',(122.495736,-113.612882,-3.5E-02)); +#259051 = VECTOR('',#259052,1.); +#259052 = DIRECTION('',(0.999999959943,2.83044836244E-04,0.)); +#259053 = ORIENTED_EDGE('',*,*,#259054,.F.); +#259054 = EDGE_CURVE('',#259055,#259047,#259057,.T.); +#259055 = VERTEX_POINT('',#259056); +#259056 = CARTESIAN_POINT('',(132.677868,-113.61,0.)); +#259057 = LINE('',#259058,#259059); +#259058 = CARTESIAN_POINT('',(132.677868,-113.61,0.)); +#259059 = VECTOR('',#259060,1.); +#259060 = DIRECTION('',(0.,0.,-1.)); +#259061 = ORIENTED_EDGE('',*,*,#259062,.F.); +#259062 = EDGE_CURVE('',#259023,#259055,#259063,.T.); +#259063 = LINE('',#259064,#259065); +#259064 = CARTESIAN_POINT('',(122.495736,-113.612882,0.)); +#259065 = VECTOR('',#259066,1.); +#259066 = DIRECTION('',(0.999999959943,2.83044836244E-04,0.)); +#259067 = PLANE('',#259068); +#259068 = AXIS2_PLACEMENT_3D('',#259069,#259070,#259071); +#259069 = CARTESIAN_POINT('',(122.495736,-113.612882,0.)); +#259070 = DIRECTION('',(2.83044836244E-04,-0.999999959943,0.)); +#259071 = DIRECTION('',(0.999999959943,2.83044836244E-04,0.)); +#259072 = ADVANCED_FACE('',(#259073),#259098,.F.); +#259073 = FACE_BOUND('',#259074,.F.); +#259074 = EDGE_LOOP('',(#259075,#259076,#259084,#259092)); +#259075 = ORIENTED_EDGE('',*,*,#259054,.T.); +#259076 = ORIENTED_EDGE('',*,*,#259077,.T.); +#259077 = EDGE_CURVE('',#259047,#259078,#259080,.T.); +#259078 = VERTEX_POINT('',#259079); +#259079 = CARTESIAN_POINT('',(134.35,-111.937868,-3.5E-02)); +#259080 = LINE('',#259081,#259082); +#259081 = CARTESIAN_POINT('',(132.677868,-113.61,-3.5E-02)); +#259082 = VECTOR('',#259083,1.); +#259083 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#259084 = ORIENTED_EDGE('',*,*,#259085,.F.); +#259085 = EDGE_CURVE('',#259086,#259078,#259088,.T.); +#259086 = VERTEX_POINT('',#259087); +#259087 = CARTESIAN_POINT('',(134.35,-111.937868,0.)); +#259088 = LINE('',#259089,#259090); +#259089 = CARTESIAN_POINT('',(134.35,-111.937868,0.)); +#259090 = VECTOR('',#259091,1.); +#259091 = DIRECTION('',(0.,0.,-1.)); +#259092 = ORIENTED_EDGE('',*,*,#259093,.F.); +#259093 = EDGE_CURVE('',#259055,#259086,#259094,.T.); +#259094 = LINE('',#259095,#259096); +#259095 = CARTESIAN_POINT('',(132.677868,-113.61,0.)); +#259096 = VECTOR('',#259097,1.); +#259097 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#259098 = PLANE('',#259099); +#259099 = AXIS2_PLACEMENT_3D('',#259100,#259101,#259102); +#259100 = CARTESIAN_POINT('',(132.677868,-113.61,0.)); +#259101 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259102 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#259103 = ADVANCED_FACE('',(#259104),#259129,.F.); +#259104 = FACE_BOUND('',#259105,.F.); +#259105 = EDGE_LOOP('',(#259106,#259107,#259115,#259123)); +#259106 = ORIENTED_EDGE('',*,*,#259085,.T.); +#259107 = ORIENTED_EDGE('',*,*,#259108,.T.); +#259108 = EDGE_CURVE('',#259078,#259109,#259111,.T.); +#259109 = VERTEX_POINT('',#259110); +#259110 = CARTESIAN_POINT('',(134.35,-109.862132,-3.5E-02)); +#259111 = LINE('',#259112,#259113); +#259112 = CARTESIAN_POINT('',(134.35,-111.937868,-3.5E-02)); +#259113 = VECTOR('',#259114,1.); +#259114 = DIRECTION('',(0.,1.,0.)); +#259115 = ORIENTED_EDGE('',*,*,#259116,.F.); +#259116 = EDGE_CURVE('',#259117,#259109,#259119,.T.); +#259117 = VERTEX_POINT('',#259118); +#259118 = CARTESIAN_POINT('',(134.35,-109.862132,0.)); +#259119 = LINE('',#259120,#259121); +#259120 = CARTESIAN_POINT('',(134.35,-109.862132,0.)); +#259121 = VECTOR('',#259122,1.); +#259122 = DIRECTION('',(0.,0.,-1.)); +#259123 = ORIENTED_EDGE('',*,*,#259124,.F.); +#259124 = EDGE_CURVE('',#259086,#259117,#259125,.T.); +#259125 = LINE('',#259126,#259127); +#259126 = CARTESIAN_POINT('',(134.35,-111.937868,0.)); +#259127 = VECTOR('',#259128,1.); +#259128 = DIRECTION('',(0.,1.,0.)); +#259129 = PLANE('',#259130); +#259130 = AXIS2_PLACEMENT_3D('',#259131,#259132,#259133); +#259131 = CARTESIAN_POINT('',(134.35,-111.937868,0.)); +#259132 = DIRECTION('',(1.,-0.,0.)); +#259133 = DIRECTION('',(0.,1.,0.)); +#259134 = ADVANCED_FACE('',(#259135),#259160,.F.); +#259135 = FACE_BOUND('',#259136,.F.); +#259136 = EDGE_LOOP('',(#259137,#259138,#259146,#259154)); +#259137 = ORIENTED_EDGE('',*,*,#259116,.T.); +#259138 = ORIENTED_EDGE('',*,*,#259139,.T.); +#259139 = EDGE_CURVE('',#259109,#259140,#259142,.T.); +#259140 = VERTEX_POINT('',#259141); +#259141 = CARTESIAN_POINT('',(132.300279,-107.808335,-3.5E-02)); +#259142 = LINE('',#259143,#259144); +#259143 = CARTESIAN_POINT('',(134.35,-109.862132,-3.5E-02)); +#259144 = VECTOR('',#259145,1.); +#259145 = DIRECTION('',(-0.70640406775,0.707808796969,0.)); +#259146 = ORIENTED_EDGE('',*,*,#259147,.F.); +#259147 = EDGE_CURVE('',#259148,#259140,#259150,.T.); +#259148 = VERTEX_POINT('',#259149); +#259149 = CARTESIAN_POINT('',(132.300279,-107.808335,0.)); +#259150 = LINE('',#259151,#259152); +#259151 = CARTESIAN_POINT('',(132.300279,-107.808335,0.)); +#259152 = VECTOR('',#259153,1.); +#259153 = DIRECTION('',(0.,0.,-1.)); +#259154 = ORIENTED_EDGE('',*,*,#259155,.F.); +#259155 = EDGE_CURVE('',#259117,#259148,#259156,.T.); +#259156 = LINE('',#259157,#259158); +#259157 = CARTESIAN_POINT('',(134.35,-109.862132,0.)); +#259158 = VECTOR('',#259159,1.); +#259159 = DIRECTION('',(-0.70640406775,0.707808796969,0.)); +#259160 = PLANE('',#259161); +#259161 = AXIS2_PLACEMENT_3D('',#259162,#259163,#259164); +#259162 = CARTESIAN_POINT('',(134.35,-109.862132,0.)); +#259163 = DIRECTION('',(0.707808796969,0.70640406775,0.)); +#259164 = DIRECTION('',(-0.70640406775,0.707808796969,0.)); +#259165 = ADVANCED_FACE('',(#259166),#259193,.T.); +#259166 = FACE_BOUND('',#259167,.F.); +#259167 = EDGE_LOOP('',(#259168,#259169,#259178,#259186)); +#259168 = ORIENTED_EDGE('',*,*,#259147,.T.); +#259169 = ORIENTED_EDGE('',*,*,#259170,.T.); +#259170 = EDGE_CURVE('',#259140,#259171,#259173,.T.); +#259171 = VERTEX_POINT('',#259172); +#259172 = CARTESIAN_POINT('',(132.508335,-107.600279,-3.5E-02)); +#259173 = CIRCLE('',#259174,0.150000188319); +#259174 = AXIS2_PLACEMENT_3D('',#259175,#259176,#259177); +#259175 = CARTESIAN_POINT('',(132.42500007768,-107.7250000776,-3.5E-02) + ); +#259176 = DIRECTION('',(0.,0.,-1.)); +#259177 = DIRECTION('',(-0.831472807323,-0.555565451305,-0.)); +#259178 = ORIENTED_EDGE('',*,*,#259179,.F.); +#259179 = EDGE_CURVE('',#259180,#259171,#259182,.T.); +#259180 = VERTEX_POINT('',#259181); +#259181 = CARTESIAN_POINT('',(132.508335,-107.600279,0.)); +#259182 = LINE('',#259183,#259184); +#259183 = CARTESIAN_POINT('',(132.508335,-107.600279,0.)); +#259184 = VECTOR('',#259185,1.); +#259185 = DIRECTION('',(0.,0.,-1.)); +#259186 = ORIENTED_EDGE('',*,*,#259187,.F.); +#259187 = EDGE_CURVE('',#259148,#259180,#259188,.T.); +#259188 = CIRCLE('',#259189,0.150000188319); +#259189 = AXIS2_PLACEMENT_3D('',#259190,#259191,#259192); +#259190 = CARTESIAN_POINT('',(132.42500007768,-107.7250000776,0.)); +#259191 = DIRECTION('',(0.,0.,-1.)); +#259192 = DIRECTION('',(-0.831472807323,-0.555565451305,-0.)); +#259193 = CYLINDRICAL_SURFACE('',#259194,0.150000188319); +#259194 = AXIS2_PLACEMENT_3D('',#259195,#259196,#259197); +#259195 = CARTESIAN_POINT('',(132.42500007768,-107.7250000776,0.)); +#259196 = DIRECTION('',(-0.,-0.,1.)); +#259197 = DIRECTION('',(-0.831472807323,-0.555565451305,-0.)); +#259198 = ADVANCED_FACE('',(#259199),#259215,.F.); +#259199 = FACE_BOUND('',#259200,.F.); +#259200 = EDGE_LOOP('',(#259201,#259202,#259208,#259209)); +#259201 = ORIENTED_EDGE('',*,*,#259179,.T.); +#259202 = ORIENTED_EDGE('',*,*,#259203,.T.); +#259203 = EDGE_CURVE('',#259171,#258725,#259204,.T.); +#259204 = LINE('',#259205,#259206); +#259205 = CARTESIAN_POINT('',(132.508335,-107.600279,-3.5E-02)); +#259206 = VECTOR('',#259207,1.); +#259207 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259208 = ORIENTED_EDGE('',*,*,#258722,.F.); +#259209 = ORIENTED_EDGE('',*,*,#259210,.F.); +#259210 = EDGE_CURVE('',#259180,#258723,#259211,.T.); +#259211 = LINE('',#259212,#259213); +#259212 = CARTESIAN_POINT('',(132.508335,-107.600279,0.)); +#259213 = VECTOR('',#259214,1.); +#259214 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259215 = PLANE('',#259216); +#259216 = AXIS2_PLACEMENT_3D('',#259217,#259218,#259219); +#259217 = CARTESIAN_POINT('',(132.508335,-107.600279,0.)); +#259218 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#259219 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259220 = ADVANCED_FACE('',(#259221),#259239,.F.); +#259221 = FACE_BOUND('',#259222,.F.); +#259222 = EDGE_LOOP('',(#259223,#259224,#259225,#259226,#259227,#259228, + #259229,#259230,#259231,#259232,#259233,#259234,#259235,#259236, + #259237,#259238)); +#259223 = ORIENTED_EDGE('',*,*,#258748,.T.); +#259224 = ORIENTED_EDGE('',*,*,#258779,.T.); +#259225 = ORIENTED_EDGE('',*,*,#258810,.T.); +#259226 = ORIENTED_EDGE('',*,*,#258841,.T.); +#259227 = ORIENTED_EDGE('',*,*,#258872,.T.); +#259228 = ORIENTED_EDGE('',*,*,#258903,.T.); +#259229 = ORIENTED_EDGE('',*,*,#258934,.T.); +#259230 = ORIENTED_EDGE('',*,*,#258966,.T.); +#259231 = ORIENTED_EDGE('',*,*,#258998,.T.); +#259232 = ORIENTED_EDGE('',*,*,#259030,.T.); +#259233 = ORIENTED_EDGE('',*,*,#259062,.T.); +#259234 = ORIENTED_EDGE('',*,*,#259093,.T.); +#259235 = ORIENTED_EDGE('',*,*,#259124,.T.); +#259236 = ORIENTED_EDGE('',*,*,#259155,.T.); +#259237 = ORIENTED_EDGE('',*,*,#259187,.T.); +#259238 = ORIENTED_EDGE('',*,*,#259210,.T.); +#259239 = PLANE('',#259240); +#259240 = AXIS2_PLACEMENT_3D('',#259241,#259242,#259243); +#259241 = CARTESIAN_POINT('',(0.,0.,0.)); +#259242 = DIRECTION('',(-0.,-0.,-1.)); +#259243 = DIRECTION('',(-1.,0.,0.)); +#259244 = ADVANCED_FACE('',(#259245),#259263,.T.); +#259245 = FACE_BOUND('',#259246,.T.); +#259246 = EDGE_LOOP('',(#259247,#259248,#259249,#259250,#259251,#259252, + #259253,#259254,#259255,#259256,#259257,#259258,#259259,#259260, + #259261,#259262)); +#259247 = ORIENTED_EDGE('',*,*,#258732,.T.); +#259248 = ORIENTED_EDGE('',*,*,#258763,.T.); +#259249 = ORIENTED_EDGE('',*,*,#258794,.T.); +#259250 = ORIENTED_EDGE('',*,*,#258825,.T.); +#259251 = ORIENTED_EDGE('',*,*,#258856,.T.); +#259252 = ORIENTED_EDGE('',*,*,#258887,.T.); +#259253 = ORIENTED_EDGE('',*,*,#258918,.T.); +#259254 = ORIENTED_EDGE('',*,*,#258949,.T.); +#259255 = ORIENTED_EDGE('',*,*,#258982,.T.); +#259256 = ORIENTED_EDGE('',*,*,#259013,.T.); +#259257 = ORIENTED_EDGE('',*,*,#259046,.T.); +#259258 = ORIENTED_EDGE('',*,*,#259077,.T.); +#259259 = ORIENTED_EDGE('',*,*,#259108,.T.); +#259260 = ORIENTED_EDGE('',*,*,#259139,.T.); +#259261 = ORIENTED_EDGE('',*,*,#259170,.T.); +#259262 = ORIENTED_EDGE('',*,*,#259203,.T.); +#259263 = PLANE('',#259264); +#259264 = AXIS2_PLACEMENT_3D('',#259265,#259266,#259267); +#259265 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#259266 = DIRECTION('',(-0.,-0.,-1.)); +#259267 = DIRECTION('',(-1.,0.,0.)); +#259268 = MANIFOLD_SOLID_BREP('',#259269); +#259269 = CLOSED_SHELL('',(#259270,#259312,#259343,#259376,#259398, + #259410)); +#259270 = ADVANCED_FACE('',(#259271),#259307,.T.); +#259271 = FACE_BOUND('',#259272,.F.); +#259272 = EDGE_LOOP('',(#259273,#259283,#259292,#259300)); +#259273 = ORIENTED_EDGE('',*,*,#259274,.T.); +#259274 = EDGE_CURVE('',#259275,#259277,#259279,.T.); +#259275 = VERTEX_POINT('',#259276); +#259276 = CARTESIAN_POINT('',(128.05,-110.4,0.)); +#259277 = VERTEX_POINT('',#259278); +#259278 = CARTESIAN_POINT('',(128.05,-110.4,-3.5E-02)); +#259279 = LINE('',#259280,#259281); +#259280 = CARTESIAN_POINT('',(128.05,-110.4,0.)); +#259281 = VECTOR('',#259282,1.); +#259282 = DIRECTION('',(0.,0.,-1.)); +#259283 = ORIENTED_EDGE('',*,*,#259284,.T.); +#259284 = EDGE_CURVE('',#259277,#259285,#259287,.T.); +#259285 = VERTEX_POINT('',#259286); +#259286 = CARTESIAN_POINT('',(128.05,-109.6,-3.5E-02)); +#259287 = CIRCLE('',#259288,0.4); +#259288 = AXIS2_PLACEMENT_3D('',#259289,#259290,#259291); +#259289 = CARTESIAN_POINT('',(128.05000000733,-110.,-3.5E-02)); +#259290 = DIRECTION('',(0.,0.,-1.)); +#259291 = DIRECTION('',(-1.833186047406E-08,-1.,-0.)); +#259292 = ORIENTED_EDGE('',*,*,#259293,.F.); +#259293 = EDGE_CURVE('',#259294,#259285,#259296,.T.); +#259294 = VERTEX_POINT('',#259295); +#259295 = CARTESIAN_POINT('',(128.05,-109.6,0.)); +#259296 = LINE('',#259297,#259298); +#259297 = CARTESIAN_POINT('',(128.05,-109.6,0.)); +#259298 = VECTOR('',#259299,1.); +#259299 = DIRECTION('',(0.,0.,-1.)); +#259300 = ORIENTED_EDGE('',*,*,#259301,.F.); +#259301 = EDGE_CURVE('',#259275,#259294,#259302,.T.); +#259302 = CIRCLE('',#259303,0.4); +#259303 = AXIS2_PLACEMENT_3D('',#259304,#259305,#259306); +#259304 = CARTESIAN_POINT('',(128.05000000733,-110.,0.)); +#259305 = DIRECTION('',(0.,0.,-1.)); +#259306 = DIRECTION('',(-1.833186047406E-08,-1.,-0.)); +#259307 = CYLINDRICAL_SURFACE('',#259308,0.4); +#259308 = AXIS2_PLACEMENT_3D('',#259309,#259310,#259311); +#259309 = CARTESIAN_POINT('',(128.05000000733,-110.,0.)); +#259310 = DIRECTION('',(-0.,-0.,1.)); +#259311 = DIRECTION('',(-1.833186047406E-08,-1.,-0.)); +#259312 = ADVANCED_FACE('',(#259313),#259338,.F.); +#259313 = FACE_BOUND('',#259314,.F.); +#259314 = EDGE_LOOP('',(#259315,#259316,#259324,#259332)); +#259315 = ORIENTED_EDGE('',*,*,#259293,.T.); +#259316 = ORIENTED_EDGE('',*,*,#259317,.T.); +#259317 = EDGE_CURVE('',#259285,#259318,#259320,.T.); +#259318 = VERTEX_POINT('',#259319); +#259319 = CARTESIAN_POINT('',(130.525,-109.6,-3.5E-02)); +#259320 = LINE('',#259321,#259322); +#259321 = CARTESIAN_POINT('',(128.05,-109.6,-3.5E-02)); +#259322 = VECTOR('',#259323,1.); +#259323 = DIRECTION('',(1.,0.,0.)); +#259324 = ORIENTED_EDGE('',*,*,#259325,.F.); +#259325 = EDGE_CURVE('',#259326,#259318,#259328,.T.); +#259326 = VERTEX_POINT('',#259327); +#259327 = CARTESIAN_POINT('',(130.525,-109.6,0.)); +#259328 = LINE('',#259329,#259330); +#259329 = CARTESIAN_POINT('',(130.525,-109.6,0.)); +#259330 = VECTOR('',#259331,1.); +#259331 = DIRECTION('',(0.,0.,-1.)); +#259332 = ORIENTED_EDGE('',*,*,#259333,.F.); +#259333 = EDGE_CURVE('',#259294,#259326,#259334,.T.); +#259334 = LINE('',#259335,#259336); +#259335 = CARTESIAN_POINT('',(128.05,-109.6,0.)); +#259336 = VECTOR('',#259337,1.); +#259337 = DIRECTION('',(1.,0.,0.)); +#259338 = PLANE('',#259339); +#259339 = AXIS2_PLACEMENT_3D('',#259340,#259341,#259342); +#259340 = CARTESIAN_POINT('',(128.05,-109.6,0.)); +#259341 = DIRECTION('',(0.,-1.,0.)); +#259342 = DIRECTION('',(1.,0.,0.)); +#259343 = ADVANCED_FACE('',(#259344),#259371,.T.); +#259344 = FACE_BOUND('',#259345,.F.); +#259345 = EDGE_LOOP('',(#259346,#259347,#259356,#259364)); +#259346 = ORIENTED_EDGE('',*,*,#259325,.T.); +#259347 = ORIENTED_EDGE('',*,*,#259348,.T.); +#259348 = EDGE_CURVE('',#259318,#259349,#259351,.T.); +#259349 = VERTEX_POINT('',#259350); +#259350 = CARTESIAN_POINT('',(130.525,-110.4,-3.5E-02)); +#259351 = CIRCLE('',#259352,0.4); +#259352 = AXIS2_PLACEMENT_3D('',#259353,#259354,#259355); +#259353 = CARTESIAN_POINT('',(130.52499999266,-110.,-3.5E-02)); +#259354 = DIRECTION('',(0.,0.,-1.)); +#259355 = DIRECTION('',(1.833178941979E-08,1.,0.)); +#259356 = ORIENTED_EDGE('',*,*,#259357,.F.); +#259357 = EDGE_CURVE('',#259358,#259349,#259360,.T.); +#259358 = VERTEX_POINT('',#259359); +#259359 = CARTESIAN_POINT('',(130.525,-110.4,0.)); +#259360 = LINE('',#259361,#259362); +#259361 = CARTESIAN_POINT('',(130.525,-110.4,0.)); +#259362 = VECTOR('',#259363,1.); +#259363 = DIRECTION('',(0.,0.,-1.)); +#259364 = ORIENTED_EDGE('',*,*,#259365,.F.); +#259365 = EDGE_CURVE('',#259326,#259358,#259366,.T.); +#259366 = CIRCLE('',#259367,0.4); +#259367 = AXIS2_PLACEMENT_3D('',#259368,#259369,#259370); +#259368 = CARTESIAN_POINT('',(130.52499999266,-110.,0.)); +#259369 = DIRECTION('',(0.,0.,-1.)); +#259370 = DIRECTION('',(1.833178941979E-08,1.,0.)); +#259371 = CYLINDRICAL_SURFACE('',#259372,0.4); +#259372 = AXIS2_PLACEMENT_3D('',#259373,#259374,#259375); +#259373 = CARTESIAN_POINT('',(130.52499999266,-110.,0.)); +#259374 = DIRECTION('',(-0.,-0.,1.)); +#259375 = DIRECTION('',(1.833178941979E-08,1.,0.)); +#259376 = ADVANCED_FACE('',(#259377),#259393,.F.); +#259377 = FACE_BOUND('',#259378,.F.); +#259378 = EDGE_LOOP('',(#259379,#259380,#259386,#259387)); +#259379 = ORIENTED_EDGE('',*,*,#259357,.T.); +#259380 = ORIENTED_EDGE('',*,*,#259381,.T.); +#259381 = EDGE_CURVE('',#259349,#259277,#259382,.T.); +#259382 = LINE('',#259383,#259384); +#259383 = CARTESIAN_POINT('',(130.525,-110.4,-3.5E-02)); +#259384 = VECTOR('',#259385,1.); +#259385 = DIRECTION('',(-1.,0.,0.)); +#259386 = ORIENTED_EDGE('',*,*,#259274,.F.); +#259387 = ORIENTED_EDGE('',*,*,#259388,.F.); +#259388 = EDGE_CURVE('',#259358,#259275,#259389,.T.); +#259389 = LINE('',#259390,#259391); +#259390 = CARTESIAN_POINT('',(130.525,-110.4,0.)); +#259391 = VECTOR('',#259392,1.); +#259392 = DIRECTION('',(-1.,0.,0.)); +#259393 = PLANE('',#259394); +#259394 = AXIS2_PLACEMENT_3D('',#259395,#259396,#259397); +#259395 = CARTESIAN_POINT('',(130.525,-110.4,0.)); +#259396 = DIRECTION('',(0.,1.,0.)); +#259397 = DIRECTION('',(-1.,0.,0.)); +#259398 = ADVANCED_FACE('',(#259399),#259405,.F.); +#259399 = FACE_BOUND('',#259400,.F.); +#259400 = EDGE_LOOP('',(#259401,#259402,#259403,#259404)); +#259401 = ORIENTED_EDGE('',*,*,#259301,.T.); +#259402 = ORIENTED_EDGE('',*,*,#259333,.T.); +#259403 = ORIENTED_EDGE('',*,*,#259365,.T.); +#259404 = ORIENTED_EDGE('',*,*,#259388,.T.); +#259405 = PLANE('',#259406); +#259406 = AXIS2_PLACEMENT_3D('',#259407,#259408,#259409); +#259407 = CARTESIAN_POINT('',(0.,0.,0.)); +#259408 = DIRECTION('',(-0.,-0.,-1.)); +#259409 = DIRECTION('',(-1.,0.,0.)); +#259410 = ADVANCED_FACE('',(#259411),#259417,.T.); +#259411 = FACE_BOUND('',#259412,.T.); +#259412 = EDGE_LOOP('',(#259413,#259414,#259415,#259416)); +#259413 = ORIENTED_EDGE('',*,*,#259284,.T.); +#259414 = ORIENTED_EDGE('',*,*,#259317,.T.); +#259415 = ORIENTED_EDGE('',*,*,#259348,.T.); +#259416 = ORIENTED_EDGE('',*,*,#259381,.T.); +#259417 = PLANE('',#259418); +#259418 = AXIS2_PLACEMENT_3D('',#259419,#259420,#259421); +#259419 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#259420 = DIRECTION('',(-0.,-0.,-1.)); +#259421 = DIRECTION('',(-1.,0.,0.)); +#259422 = MANIFOLD_SOLID_BREP('',#259423); +#259423 = CLOSED_SHELL('',(#259424,#259466,#259497,#259530,#259561, + #259592,#259625,#259647,#259680,#259713,#259734)); +#259424 = ADVANCED_FACE('',(#259425),#259461,.T.); +#259425 = FACE_BOUND('',#259426,.T.); +#259426 = EDGE_LOOP('',(#259427,#259437,#259446,#259454)); +#259427 = ORIENTED_EDGE('',*,*,#259428,.T.); +#259428 = EDGE_CURVE('',#259429,#259431,#259433,.T.); +#259429 = VERTEX_POINT('',#259430); +#259430 = CARTESIAN_POINT('',(146.694454,-114.694454,1.51)); +#259431 = VERTEX_POINT('',#259432); +#259432 = CARTESIAN_POINT('',(146.694454,-114.694454,1.545)); +#259433 = LINE('',#259434,#259435); +#259434 = CARTESIAN_POINT('',(146.694454,-114.694454,1.51)); +#259435 = VECTOR('',#259436,1.); +#259436 = DIRECTION('',(0.,0.,1.)); +#259437 = ORIENTED_EDGE('',*,*,#259438,.T.); +#259438 = EDGE_CURVE('',#259431,#259439,#259441,.T.); +#259439 = VERTEX_POINT('',#259440); +#259440 = CARTESIAN_POINT('',(146.5,-114.775,1.545)); +#259441 = CIRCLE('',#259442,0.274993677362); +#259442 = AXIS2_PLACEMENT_3D('',#259443,#259444,#259445); +#259443 = CARTESIAN_POINT('',(146.50000188928,-114.5000063226,1.545)); +#259444 = DIRECTION('',(0.,0.,-1.)); +#259445 = DIRECTION('',(0.707114841973,-0.707098720309,0.)); +#259446 = ORIENTED_EDGE('',*,*,#259447,.F.); +#259447 = EDGE_CURVE('',#259448,#259439,#259450,.T.); +#259448 = VERTEX_POINT('',#259449); +#259449 = CARTESIAN_POINT('',(146.5,-114.775,1.51)); +#259450 = LINE('',#259451,#259452); +#259451 = CARTESIAN_POINT('',(146.5,-114.775,1.51)); +#259452 = VECTOR('',#259453,1.); +#259453 = DIRECTION('',(0.,0.,1.)); +#259454 = ORIENTED_EDGE('',*,*,#259455,.F.); +#259455 = EDGE_CURVE('',#259429,#259448,#259456,.T.); +#259456 = CIRCLE('',#259457,0.274993677362); +#259457 = AXIS2_PLACEMENT_3D('',#259458,#259459,#259460); +#259458 = CARTESIAN_POINT('',(146.50000188928,-114.5000063226,1.51)); +#259459 = DIRECTION('',(0.,0.,-1.)); +#259460 = DIRECTION('',(0.707114841973,-0.707098720309,0.)); +#259461 = CYLINDRICAL_SURFACE('',#259462,0.274993677362); +#259462 = AXIS2_PLACEMENT_3D('',#259463,#259464,#259465); +#259463 = CARTESIAN_POINT('',(146.50000188928,-114.5000063226,1.51)); +#259464 = DIRECTION('',(0.,0.,-1.)); +#259465 = DIRECTION('',(0.707114841973,-0.707098720309,0.)); +#259466 = ADVANCED_FACE('',(#259467),#259492,.T.); +#259467 = FACE_BOUND('',#259468,.T.); +#259468 = EDGE_LOOP('',(#259469,#259470,#259478,#259486)); +#259469 = ORIENTED_EDGE('',*,*,#259447,.T.); +#259470 = ORIENTED_EDGE('',*,*,#259471,.T.); +#259471 = EDGE_CURVE('',#259439,#259472,#259474,.T.); +#259472 = VERTEX_POINT('',#259473); +#259473 = CARTESIAN_POINT('',(143.114805,-114.777164,1.545)); +#259474 = LINE('',#259475,#259476); +#259475 = CARTESIAN_POINT('',(146.5,-114.775,1.545)); +#259476 = VECTOR('',#259477,1.); +#259477 = DIRECTION('',(-0.999999795677,-6.392540334718E-04,0.)); +#259478 = ORIENTED_EDGE('',*,*,#259479,.F.); +#259479 = EDGE_CURVE('',#259480,#259472,#259482,.T.); +#259480 = VERTEX_POINT('',#259481); +#259481 = CARTESIAN_POINT('',(143.114805,-114.777164,1.51)); +#259482 = LINE('',#259483,#259484); +#259483 = CARTESIAN_POINT('',(143.114805,-114.777164,1.51)); +#259484 = VECTOR('',#259485,1.); +#259485 = DIRECTION('',(0.,0.,1.)); +#259486 = ORIENTED_EDGE('',*,*,#259487,.F.); +#259487 = EDGE_CURVE('',#259448,#259480,#259488,.T.); +#259488 = LINE('',#259489,#259490); +#259489 = CARTESIAN_POINT('',(146.5,-114.775,1.51)); +#259490 = VECTOR('',#259491,1.); +#259491 = DIRECTION('',(-0.999999795677,-6.392540334718E-04,0.)); +#259492 = PLANE('',#259493); +#259493 = AXIS2_PLACEMENT_3D('',#259494,#259495,#259496); +#259494 = CARTESIAN_POINT('',(146.5,-114.775,1.51)); +#259495 = DIRECTION('',(6.392540334718E-04,-0.999999795677,0.)); +#259496 = DIRECTION('',(-0.999999795677,-6.392540334718E-04,0.)); +#259497 = ADVANCED_FACE('',(#259498),#259525,.T.); +#259498 = FACE_BOUND('',#259499,.T.); +#259499 = EDGE_LOOP('',(#259500,#259501,#259510,#259518)); +#259500 = ORIENTED_EDGE('',*,*,#259479,.T.); +#259501 = ORIENTED_EDGE('',*,*,#259502,.T.); +#259502 = EDGE_CURVE('',#259472,#259503,#259505,.T.); +#259503 = VERTEX_POINT('',#259504); +#259504 = CARTESIAN_POINT('',(143.118553,-114.225,1.545)); +#259505 = CIRCLE('',#259506,0.299797021173); +#259506 = AXIS2_PLACEMENT_3D('',#259507,#259508,#259509); +#259507 = CARTESIAN_POINT('',(142.99983362245,-114.5002888724,1.545)); +#259508 = DIRECTION('',(0.,0.,-1.)); +#259509 = DIRECTION('',(0.383497397977,-0.923541956678,0.)); +#259510 = ORIENTED_EDGE('',*,*,#259511,.F.); +#259511 = EDGE_CURVE('',#259512,#259503,#259514,.T.); +#259512 = VERTEX_POINT('',#259513); +#259513 = CARTESIAN_POINT('',(143.118553,-114.225,1.51)); +#259514 = LINE('',#259515,#259516); +#259515 = CARTESIAN_POINT('',(143.118553,-114.225,1.51)); +#259516 = VECTOR('',#259517,1.); +#259517 = DIRECTION('',(0.,0.,1.)); +#259518 = ORIENTED_EDGE('',*,*,#259519,.F.); +#259519 = EDGE_CURVE('',#259480,#259512,#259520,.T.); +#259520 = CIRCLE('',#259521,0.299797021173); +#259521 = AXIS2_PLACEMENT_3D('',#259522,#259523,#259524); +#259522 = CARTESIAN_POINT('',(142.99983362245,-114.5002888724,1.51)); +#259523 = DIRECTION('',(0.,0.,-1.)); +#259524 = DIRECTION('',(0.383497397977,-0.923541956678,0.)); +#259525 = CYLINDRICAL_SURFACE('',#259526,0.299797021173); +#259526 = AXIS2_PLACEMENT_3D('',#259527,#259528,#259529); +#259527 = CARTESIAN_POINT('',(142.99983362245,-114.5002888724,1.51)); +#259528 = DIRECTION('',(0.,0.,-1.)); +#259529 = DIRECTION('',(0.383497397977,-0.923541956678,0.)); +#259530 = ADVANCED_FACE('',(#259531),#259556,.T.); +#259531 = FACE_BOUND('',#259532,.T.); +#259532 = EDGE_LOOP('',(#259533,#259534,#259542,#259550)); +#259533 = ORIENTED_EDGE('',*,*,#259511,.T.); +#259534 = ORIENTED_EDGE('',*,*,#259535,.T.); +#259535 = EDGE_CURVE('',#259503,#259536,#259538,.T.); +#259536 = VERTEX_POINT('',#259537); +#259537 = CARTESIAN_POINT('',(146.386092,-114.225,1.545)); +#259538 = LINE('',#259539,#259540); +#259539 = CARTESIAN_POINT('',(143.118553,-114.225,1.545)); +#259540 = VECTOR('',#259541,1.); +#259541 = DIRECTION('',(1.,0.,0.)); +#259542 = ORIENTED_EDGE('',*,*,#259543,.F.); +#259543 = EDGE_CURVE('',#259544,#259536,#259546,.T.); +#259544 = VERTEX_POINT('',#259545); +#259545 = CARTESIAN_POINT('',(146.386092,-114.225,1.51)); +#259546 = LINE('',#259547,#259548); +#259547 = CARTESIAN_POINT('',(146.386092,-114.225,1.51)); +#259548 = VECTOR('',#259549,1.); +#259549 = DIRECTION('',(0.,0.,1.)); +#259550 = ORIENTED_EDGE('',*,*,#259551,.F.); +#259551 = EDGE_CURVE('',#259512,#259544,#259552,.T.); +#259552 = LINE('',#259553,#259554); +#259553 = CARTESIAN_POINT('',(143.118553,-114.225,1.51)); +#259554 = VECTOR('',#259555,1.); +#259555 = DIRECTION('',(1.,0.,0.)); +#259556 = PLANE('',#259557); +#259557 = AXIS2_PLACEMENT_3D('',#259558,#259559,#259560); +#259558 = CARTESIAN_POINT('',(143.118553,-114.225,1.51)); +#259559 = DIRECTION('',(0.,1.,0.)); +#259560 = DIRECTION('',(1.,0.,0.)); +#259561 = ADVANCED_FACE('',(#259562),#259587,.T.); +#259562 = FACE_BOUND('',#259563,.T.); +#259563 = EDGE_LOOP('',(#259564,#259565,#259573,#259581)); +#259564 = ORIENTED_EDGE('',*,*,#259543,.T.); +#259565 = ORIENTED_EDGE('',*,*,#259566,.T.); +#259566 = EDGE_CURVE('',#259536,#259567,#259569,.T.); +#259567 = VERTEX_POINT('',#259568); +#259568 = CARTESIAN_POINT('',(148.722836,-111.885195,1.545)); +#259569 = LINE('',#259570,#259571); +#259570 = CARTESIAN_POINT('',(146.386092,-114.225,1.545)); +#259571 = VECTOR('',#259572,1.); +#259572 = DIRECTION('',(0.706643798385,0.707569461045,0.)); +#259573 = ORIENTED_EDGE('',*,*,#259574,.F.); +#259574 = EDGE_CURVE('',#259575,#259567,#259577,.T.); +#259575 = VERTEX_POINT('',#259576); +#259576 = CARTESIAN_POINT('',(148.722836,-111.885195,1.51)); +#259577 = LINE('',#259578,#259579); +#259578 = CARTESIAN_POINT('',(148.722836,-111.885195,1.51)); +#259579 = VECTOR('',#259580,1.); +#259580 = DIRECTION('',(0.,0.,1.)); +#259581 = ORIENTED_EDGE('',*,*,#259582,.F.); +#259582 = EDGE_CURVE('',#259544,#259575,#259583,.T.); +#259583 = LINE('',#259584,#259585); +#259584 = CARTESIAN_POINT('',(146.386092,-114.225,1.51)); +#259585 = VECTOR('',#259586,1.); +#259586 = DIRECTION('',(0.706643798385,0.707569461045,0.)); +#259587 = PLANE('',#259588); +#259588 = AXIS2_PLACEMENT_3D('',#259589,#259590,#259591); +#259589 = CARTESIAN_POINT('',(146.386092,-114.225,1.51)); +#259590 = DIRECTION('',(-0.707569461045,0.706643798385,0.)); +#259591 = DIRECTION('',(0.706643798385,0.707569461045,0.)); +#259592 = ADVANCED_FACE('',(#259593),#259620,.T.); +#259593 = FACE_BOUND('',#259594,.T.); +#259594 = EDGE_LOOP('',(#259595,#259596,#259605,#259613)); +#259595 = ORIENTED_EDGE('',*,*,#259574,.T.); +#259596 = ORIENTED_EDGE('',*,*,#259597,.T.); +#259597 = EDGE_CURVE('',#259567,#259598,#259600,.T.); +#259598 = VERTEX_POINT('',#259599); +#259599 = CARTESIAN_POINT('',(149.110623,-112.278284,1.545)); +#259600 = CIRCLE('',#259601,0.299700971144); +#259601 = AXIS2_PLACEMENT_3D('',#259602,#259603,#259604); +#259602 = CARTESIAN_POINT('',(148.99973813083,-111.9998504928,1.545)); +#259603 = DIRECTION('',(0.,0.,-1.)); +#259604 = DIRECTION('',(-0.923928039928,0.382566304102,0.)); +#259605 = ORIENTED_EDGE('',*,*,#259606,.F.); +#259606 = EDGE_CURVE('',#259607,#259598,#259609,.T.); +#259607 = VERTEX_POINT('',#259608); +#259608 = CARTESIAN_POINT('',(149.110623,-112.278284,1.51)); +#259609 = LINE('',#259610,#259611); +#259610 = CARTESIAN_POINT('',(149.110623,-112.278284,1.51)); +#259611 = VECTOR('',#259612,1.); +#259612 = DIRECTION('',(0.,0.,1.)); +#259613 = ORIENTED_EDGE('',*,*,#259614,.F.); +#259614 = EDGE_CURVE('',#259575,#259607,#259615,.T.); +#259615 = CIRCLE('',#259616,0.299700971144); +#259616 = AXIS2_PLACEMENT_3D('',#259617,#259618,#259619); +#259617 = CARTESIAN_POINT('',(148.99973813083,-111.9998504928,1.51)); +#259618 = DIRECTION('',(0.,0.,-1.)); +#259619 = DIRECTION('',(-0.923928039928,0.382566304102,0.)); +#259620 = CYLINDRICAL_SURFACE('',#259621,0.299700971144); +#259621 = AXIS2_PLACEMENT_3D('',#259622,#259623,#259624); +#259622 = CARTESIAN_POINT('',(148.99973813083,-111.9998504928,1.51)); +#259623 = DIRECTION('',(0.,0.,-1.)); +#259624 = DIRECTION('',(-0.923928039928,0.382566304102,0.)); +#259625 = ADVANCED_FACE('',(#259626),#259642,.T.); +#259626 = FACE_BOUND('',#259627,.T.); +#259627 = EDGE_LOOP('',(#259628,#259629,#259635,#259636)); +#259628 = ORIENTED_EDGE('',*,*,#259606,.T.); +#259629 = ORIENTED_EDGE('',*,*,#259630,.T.); +#259630 = EDGE_CURVE('',#259598,#259431,#259631,.T.); +#259631 = LINE('',#259632,#259633); +#259632 = CARTESIAN_POINT('',(149.110623,-112.278284,1.545)); +#259633 = VECTOR('',#259634,1.); +#259634 = DIRECTION('',(-0.707106634858,-0.707106927515,0.)); +#259635 = ORIENTED_EDGE('',*,*,#259428,.F.); +#259636 = ORIENTED_EDGE('',*,*,#259637,.F.); +#259637 = EDGE_CURVE('',#259607,#259429,#259638,.T.); +#259638 = LINE('',#259639,#259640); +#259639 = CARTESIAN_POINT('',(149.110623,-112.278284,1.51)); +#259640 = VECTOR('',#259641,1.); +#259641 = DIRECTION('',(-0.707106634858,-0.707106927515,0.)); +#259642 = PLANE('',#259643); +#259643 = AXIS2_PLACEMENT_3D('',#259644,#259645,#259646); +#259644 = CARTESIAN_POINT('',(149.110623,-112.278284,1.51)); +#259645 = DIRECTION('',(0.707106927515,-0.707106634858,0.)); +#259646 = DIRECTION('',(-0.707106634858,-0.707106927515,0.)); +#259647 = ADVANCED_FACE('',(#259648),#259675,.F.); +#259648 = FACE_BOUND('',#259649,.T.); +#259649 = EDGE_LOOP('',(#259650,#259660,#259667,#259668)); +#259650 = ORIENTED_EDGE('',*,*,#259651,.T.); +#259651 = EDGE_CURVE('',#259652,#259654,#259656,.T.); +#259652 = VERTEX_POINT('',#259653); +#259653 = CARTESIAN_POINT('',(143.137255,-114.5,1.51)); +#259654 = VERTEX_POINT('',#259655); +#259655 = CARTESIAN_POINT('',(143.137255,-114.5,1.545)); +#259656 = LINE('',#259657,#259658); +#259657 = CARTESIAN_POINT('',(143.137255,-114.5,1.51)); +#259658 = VECTOR('',#259659,1.); +#259659 = DIRECTION('',(0.,0.,1.)); +#259660 = ORIENTED_EDGE('',*,*,#259661,.T.); +#259661 = EDGE_CURVE('',#259654,#259654,#259662,.T.); +#259662 = CIRCLE('',#259663,0.137255); +#259663 = AXIS2_PLACEMENT_3D('',#259664,#259665,#259666); +#259664 = CARTESIAN_POINT('',(143.,-114.5,1.545)); +#259665 = DIRECTION('',(0.,0.,1.)); +#259666 = DIRECTION('',(1.,0.,-0.)); +#259667 = ORIENTED_EDGE('',*,*,#259651,.F.); +#259668 = ORIENTED_EDGE('',*,*,#259669,.F.); +#259669 = EDGE_CURVE('',#259652,#259652,#259670,.T.); +#259670 = CIRCLE('',#259671,0.137255); +#259671 = AXIS2_PLACEMENT_3D('',#259672,#259673,#259674); +#259672 = CARTESIAN_POINT('',(143.,-114.5,1.51)); +#259673 = DIRECTION('',(0.,0.,1.)); +#259674 = DIRECTION('',(1.,0.,-0.)); +#259675 = CYLINDRICAL_SURFACE('',#259676,0.137255); +#259676 = AXIS2_PLACEMENT_3D('',#259677,#259678,#259679); +#259677 = CARTESIAN_POINT('',(143.,-114.5,1.51)); +#259678 = DIRECTION('',(-0.,-0.,-1.)); +#259679 = DIRECTION('',(1.,0.,-0.)); +#259680 = ADVANCED_FACE('',(#259681),#259708,.F.); +#259681 = FACE_BOUND('',#259682,.T.); +#259682 = EDGE_LOOP('',(#259683,#259693,#259700,#259701)); +#259683 = ORIENTED_EDGE('',*,*,#259684,.T.); +#259684 = EDGE_CURVE('',#259685,#259687,#259689,.T.); +#259685 = VERTEX_POINT('',#259686); +#259686 = CARTESIAN_POINT('',(149.137255,-112.,1.51)); +#259687 = VERTEX_POINT('',#259688); +#259688 = CARTESIAN_POINT('',(149.137255,-112.,1.545)); +#259689 = LINE('',#259690,#259691); +#259690 = CARTESIAN_POINT('',(149.137255,-112.,1.51)); +#259691 = VECTOR('',#259692,1.); +#259692 = DIRECTION('',(0.,0.,1.)); +#259693 = ORIENTED_EDGE('',*,*,#259694,.T.); +#259694 = EDGE_CURVE('',#259687,#259687,#259695,.T.); +#259695 = CIRCLE('',#259696,0.137255); +#259696 = AXIS2_PLACEMENT_3D('',#259697,#259698,#259699); +#259697 = CARTESIAN_POINT('',(149.,-112.,1.545)); +#259698 = DIRECTION('',(0.,0.,1.)); +#259699 = DIRECTION('',(1.,0.,-0.)); +#259700 = ORIENTED_EDGE('',*,*,#259684,.F.); +#259701 = ORIENTED_EDGE('',*,*,#259702,.F.); +#259702 = EDGE_CURVE('',#259685,#259685,#259703,.T.); +#259703 = CIRCLE('',#259704,0.137255); +#259704 = AXIS2_PLACEMENT_3D('',#259705,#259706,#259707); +#259705 = CARTESIAN_POINT('',(149.,-112.,1.51)); +#259706 = DIRECTION('',(0.,0.,1.)); +#259707 = DIRECTION('',(1.,0.,-0.)); +#259708 = CYLINDRICAL_SURFACE('',#259709,0.137255); +#259709 = AXIS2_PLACEMENT_3D('',#259710,#259711,#259712); +#259710 = CARTESIAN_POINT('',(149.,-112.,1.51)); +#259711 = DIRECTION('',(-0.,-0.,-1.)); +#259712 = DIRECTION('',(1.,0.,-0.)); +#259713 = ADVANCED_FACE('',(#259714,#259723,#259726),#259729,.F.); +#259714 = FACE_BOUND('',#259715,.T.); +#259715 = EDGE_LOOP('',(#259716,#259717,#259718,#259719,#259720,#259721, + #259722)); +#259716 = ORIENTED_EDGE('',*,*,#259455,.T.); +#259717 = ORIENTED_EDGE('',*,*,#259487,.T.); +#259718 = ORIENTED_EDGE('',*,*,#259519,.T.); +#259719 = ORIENTED_EDGE('',*,*,#259551,.T.); +#259720 = ORIENTED_EDGE('',*,*,#259582,.T.); +#259721 = ORIENTED_EDGE('',*,*,#259614,.T.); +#259722 = ORIENTED_EDGE('',*,*,#259637,.T.); +#259723 = FACE_BOUND('',#259724,.T.); +#259724 = EDGE_LOOP('',(#259725)); +#259725 = ORIENTED_EDGE('',*,*,#259669,.T.); +#259726 = FACE_BOUND('',#259727,.T.); +#259727 = EDGE_LOOP('',(#259728)); +#259728 = ORIENTED_EDGE('',*,*,#259702,.T.); +#259729 = PLANE('',#259730); +#259730 = AXIS2_PLACEMENT_3D('',#259731,#259732,#259733); +#259731 = CARTESIAN_POINT('',(0.,0.,1.51)); +#259732 = DIRECTION('',(0.,0.,1.)); +#259733 = DIRECTION('',(1.,0.,-0.)); +#259734 = ADVANCED_FACE('',(#259735,#259744,#259747),#259750,.T.); +#259735 = FACE_BOUND('',#259736,.F.); +#259736 = EDGE_LOOP('',(#259737,#259738,#259739,#259740,#259741,#259742, + #259743)); +#259737 = ORIENTED_EDGE('',*,*,#259438,.T.); +#259738 = ORIENTED_EDGE('',*,*,#259471,.T.); +#259739 = ORIENTED_EDGE('',*,*,#259502,.T.); +#259740 = ORIENTED_EDGE('',*,*,#259535,.T.); +#259741 = ORIENTED_EDGE('',*,*,#259566,.T.); +#259742 = ORIENTED_EDGE('',*,*,#259597,.T.); +#259743 = ORIENTED_EDGE('',*,*,#259630,.T.); +#259744 = FACE_BOUND('',#259745,.F.); +#259745 = EDGE_LOOP('',(#259746)); +#259746 = ORIENTED_EDGE('',*,*,#259661,.T.); +#259747 = FACE_BOUND('',#259748,.F.); +#259748 = EDGE_LOOP('',(#259749)); +#259749 = ORIENTED_EDGE('',*,*,#259694,.T.); +#259750 = PLANE('',#259751); +#259751 = AXIS2_PLACEMENT_3D('',#259752,#259753,#259754); +#259752 = CARTESIAN_POINT('',(0.,0.,1.545)); +#259753 = DIRECTION('',(0.,0.,1.)); +#259754 = DIRECTION('',(1.,0.,-0.)); +#259755 = MANIFOLD_SOLID_BREP('',#259756); +#259756 = CLOSED_SHELL('',(#259757,#259799,#259830,#259861,#259892, + #259925,#259956,#259989,#260020,#260053,#260084,#260117,#260139, + #260172,#260205,#260231)); +#259757 = ADVANCED_FACE('',(#259758),#259794,.T.); +#259758 = FACE_BOUND('',#259759,.T.); +#259759 = EDGE_LOOP('',(#259760,#259770,#259779,#259787)); +#259760 = ORIENTED_EDGE('',*,*,#259761,.T.); +#259761 = EDGE_CURVE('',#259762,#259764,#259766,.T.); +#259762 = VERTEX_POINT('',#259763); +#259763 = CARTESIAN_POINT('',(133.735195,-110.722836,1.51)); +#259764 = VERTEX_POINT('',#259765); +#259765 = CARTESIAN_POINT('',(133.735195,-110.722836,1.545)); +#259766 = LINE('',#259767,#259768); +#259767 = CARTESIAN_POINT('',(133.735195,-110.722836,1.51)); +#259768 = VECTOR('',#259769,1.); +#259769 = DIRECTION('',(0.,0.,1.)); +#259770 = ORIENTED_EDGE('',*,*,#259771,.T.); +#259771 = EDGE_CURVE('',#259764,#259772,#259774,.T.); +#259772 = VERTEX_POINT('',#259773); +#259773 = CARTESIAN_POINT('',(133.727778,-111.275,1.545)); +#259774 = CIRCLE('',#259775,0.300356018985); +#259775 = AXIS2_PLACEMENT_3D('',#259776,#259777,#259778); +#259776 = CARTESIAN_POINT('',(133.84970744845,-111.0005060151,1.545)); +#259777 = DIRECTION('',(0.,0.,-1.)); +#259778 = DIRECTION('',(-0.381255713924,0.924469621242,-0.)); +#259779 = ORIENTED_EDGE('',*,*,#259780,.F.); +#259780 = EDGE_CURVE('',#259781,#259772,#259783,.T.); +#259781 = VERTEX_POINT('',#259782); +#259782 = CARTESIAN_POINT('',(133.727778,-111.275,1.51)); +#259783 = LINE('',#259784,#259785); +#259784 = CARTESIAN_POINT('',(133.727778,-111.275,1.51)); +#259785 = VECTOR('',#259786,1.); +#259786 = DIRECTION('',(0.,0.,1.)); +#259787 = ORIENTED_EDGE('',*,*,#259788,.F.); +#259788 = EDGE_CURVE('',#259762,#259781,#259789,.T.); +#259789 = CIRCLE('',#259790,0.300356018985); +#259790 = AXIS2_PLACEMENT_3D('',#259791,#259792,#259793); +#259791 = CARTESIAN_POINT('',(133.84970744845,-111.0005060151,1.51)); +#259792 = DIRECTION('',(0.,0.,-1.)); +#259793 = DIRECTION('',(-0.381255713924,0.924469621242,-0.)); +#259794 = CYLINDRICAL_SURFACE('',#259795,0.300356018985); +#259795 = AXIS2_PLACEMENT_3D('',#259796,#259797,#259798); +#259796 = CARTESIAN_POINT('',(133.84970744845,-111.0005060151,1.51)); +#259797 = DIRECTION('',(0.,0.,-1.)); +#259798 = DIRECTION('',(-0.381255713924,0.924469621242,-0.)); +#259799 = ADVANCED_FACE('',(#259800),#259825,.T.); +#259800 = FACE_BOUND('',#259801,.T.); +#259801 = EDGE_LOOP('',(#259802,#259803,#259811,#259819)); +#259802 = ORIENTED_EDGE('',*,*,#259780,.T.); +#259803 = ORIENTED_EDGE('',*,*,#259804,.T.); +#259804 = EDGE_CURVE('',#259772,#259805,#259807,.T.); +#259805 = VERTEX_POINT('',#259806); +#259806 = CARTESIAN_POINT('',(133.3,-111.702778,1.545)); +#259807 = LINE('',#259808,#259809); +#259808 = CARTESIAN_POINT('',(133.727778,-111.275,1.545)); +#259809 = VECTOR('',#259810,1.); +#259810 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#259811 = ORIENTED_EDGE('',*,*,#259812,.F.); +#259812 = EDGE_CURVE('',#259813,#259805,#259815,.T.); +#259813 = VERTEX_POINT('',#259814); +#259814 = CARTESIAN_POINT('',(133.3,-111.702778,1.51)); +#259815 = LINE('',#259816,#259817); +#259816 = CARTESIAN_POINT('',(133.3,-111.702778,1.51)); +#259817 = VECTOR('',#259818,1.); +#259818 = DIRECTION('',(0.,0.,1.)); +#259819 = ORIENTED_EDGE('',*,*,#259820,.F.); +#259820 = EDGE_CURVE('',#259781,#259813,#259821,.T.); +#259821 = LINE('',#259822,#259823); +#259822 = CARTESIAN_POINT('',(133.727778,-111.275,1.51)); +#259823 = VECTOR('',#259824,1.); +#259824 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#259825 = PLANE('',#259826); +#259826 = AXIS2_PLACEMENT_3D('',#259827,#259828,#259829); +#259827 = CARTESIAN_POINT('',(133.727778,-111.275,1.51)); +#259828 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#259829 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#259830 = ADVANCED_FACE('',(#259831),#259856,.T.); +#259831 = FACE_BOUND('',#259832,.T.); +#259832 = EDGE_LOOP('',(#259833,#259834,#259842,#259850)); +#259833 = ORIENTED_EDGE('',*,*,#259812,.T.); +#259834 = ORIENTED_EDGE('',*,*,#259835,.T.); +#259835 = EDGE_CURVE('',#259805,#259836,#259838,.T.); +#259836 = VERTEX_POINT('',#259837); +#259837 = CARTESIAN_POINT('',(133.3,-113.297221,1.545)); +#259838 = LINE('',#259839,#259840); +#259839 = CARTESIAN_POINT('',(133.3,-111.702778,1.545)); +#259840 = VECTOR('',#259841,1.); +#259841 = DIRECTION('',(0.,-1.,0.)); +#259842 = ORIENTED_EDGE('',*,*,#259843,.F.); +#259843 = EDGE_CURVE('',#259844,#259836,#259846,.T.); +#259844 = VERTEX_POINT('',#259845); +#259845 = CARTESIAN_POINT('',(133.3,-113.297221,1.51)); +#259846 = LINE('',#259847,#259848); +#259847 = CARTESIAN_POINT('',(133.3,-113.297221,1.51)); +#259848 = VECTOR('',#259849,1.); +#259849 = DIRECTION('',(0.,0.,1.)); +#259850 = ORIENTED_EDGE('',*,*,#259851,.F.); +#259851 = EDGE_CURVE('',#259813,#259844,#259852,.T.); +#259852 = LINE('',#259853,#259854); +#259853 = CARTESIAN_POINT('',(133.3,-111.702778,1.51)); +#259854 = VECTOR('',#259855,1.); +#259855 = DIRECTION('',(0.,-1.,0.)); +#259856 = PLANE('',#259857); +#259857 = AXIS2_PLACEMENT_3D('',#259858,#259859,#259860); +#259858 = CARTESIAN_POINT('',(133.3,-111.702778,1.51)); +#259859 = DIRECTION('',(1.,0.,-0.)); +#259860 = DIRECTION('',(0.,-1.,0.)); +#259861 = ADVANCED_FACE('',(#259862),#259887,.T.); +#259862 = FACE_BOUND('',#259863,.T.); +#259863 = EDGE_LOOP('',(#259864,#259865,#259873,#259881)); +#259864 = ORIENTED_EDGE('',*,*,#259843,.T.); +#259865 = ORIENTED_EDGE('',*,*,#259866,.T.); +#259866 = EDGE_CURVE('',#259836,#259867,#259869,.T.); +#259867 = VERTEX_POINT('',#259868); +#259868 = CARTESIAN_POINT('',(133.703675,-113.697836,1.545)); +#259869 = LINE('',#259870,#259871); +#259870 = CARTESIAN_POINT('',(133.3,-113.297221,1.545)); +#259871 = VECTOR('',#259872,1.); +#259872 = DIRECTION('',(0.709791901034,-0.704411426104,0.)); +#259873 = ORIENTED_EDGE('',*,*,#259874,.F.); +#259874 = EDGE_CURVE('',#259875,#259867,#259877,.T.); +#259875 = VERTEX_POINT('',#259876); +#259876 = CARTESIAN_POINT('',(133.703675,-113.697836,1.51)); +#259877 = LINE('',#259878,#259879); +#259878 = CARTESIAN_POINT('',(133.703675,-113.697836,1.51)); +#259879 = VECTOR('',#259880,1.); +#259880 = DIRECTION('',(0.,0.,1.)); +#259881 = ORIENTED_EDGE('',*,*,#259882,.F.); +#259882 = EDGE_CURVE('',#259844,#259875,#259883,.T.); +#259883 = LINE('',#259884,#259885); +#259884 = CARTESIAN_POINT('',(133.3,-113.297221,1.51)); +#259885 = VECTOR('',#259886,1.); +#259886 = DIRECTION('',(0.709791901034,-0.704411426104,0.)); +#259887 = PLANE('',#259888); +#259888 = AXIS2_PLACEMENT_3D('',#259889,#259890,#259891); +#259889 = CARTESIAN_POINT('',(133.3,-113.297221,1.51)); +#259890 = DIRECTION('',(0.704411426104,0.709791901034,-0.)); +#259891 = DIRECTION('',(0.709791901034,-0.704411426104,0.)); +#259892 = ADVANCED_FACE('',(#259893),#259920,.T.); +#259893 = FACE_BOUND('',#259894,.T.); +#259894 = EDGE_LOOP('',(#259895,#259896,#259905,#259913)); +#259895 = ORIENTED_EDGE('',*,*,#259874,.T.); +#259896 = ORIENTED_EDGE('',*,*,#259897,.T.); +#259897 = EDGE_CURVE('',#259867,#259898,#259900,.T.); +#259898 = VERTEX_POINT('',#259899); +#259899 = CARTESIAN_POINT('',(133.310585,-114.085624,1.545)); +#259900 = CIRCLE('',#259901,0.299797321735); +#259901 = AXIS2_PLACEMENT_3D('',#259902,#259903,#259904); +#259902 = CARTESIAN_POINT('',(133.58919159875,-113.9749135793,1.545)); +#259903 = DIRECTION('',(0.,-0.,-1.)); +#259904 = DIRECTION('',(0.381869326181,0.924216326258,-0.)); +#259905 = ORIENTED_EDGE('',*,*,#259906,.F.); +#259906 = EDGE_CURVE('',#259907,#259898,#259909,.T.); +#259907 = VERTEX_POINT('',#259908); +#259908 = CARTESIAN_POINT('',(133.310585,-114.085624,1.51)); +#259909 = LINE('',#259910,#259911); +#259910 = CARTESIAN_POINT('',(133.310585,-114.085624,1.51)); +#259911 = VECTOR('',#259912,1.); +#259912 = DIRECTION('',(0.,0.,1.)); +#259913 = ORIENTED_EDGE('',*,*,#259914,.F.); +#259914 = EDGE_CURVE('',#259875,#259907,#259915,.T.); +#259915 = CIRCLE('',#259916,0.299797321735); +#259916 = AXIS2_PLACEMENT_3D('',#259917,#259918,#259919); +#259917 = CARTESIAN_POINT('',(133.58919159875,-113.9749135793,1.51)); +#259918 = DIRECTION('',(0.,-0.,-1.)); +#259919 = DIRECTION('',(0.381869326181,0.924216326258,-0.)); +#259920 = CYLINDRICAL_SURFACE('',#259921,0.299797321735); +#259921 = AXIS2_PLACEMENT_3D('',#259922,#259923,#259924); +#259922 = CARTESIAN_POINT('',(133.58919159875,-113.9749135793,1.51)); +#259923 = DIRECTION('',(0.,-0.,-1.)); +#259924 = DIRECTION('',(0.381869326181,0.924216326258,-0.)); +#259925 = ADVANCED_FACE('',(#259926),#259951,.T.); +#259926 = FACE_BOUND('',#259927,.T.); +#259927 = EDGE_LOOP('',(#259928,#259929,#259937,#259945)); +#259928 = ORIENTED_EDGE('',*,*,#259906,.T.); +#259929 = ORIENTED_EDGE('',*,*,#259930,.T.); +#259930 = EDGE_CURVE('',#259898,#259931,#259933,.T.); +#259931 = VERTEX_POINT('',#259932); +#259932 = CARTESIAN_POINT('',(132.830546,-113.605584,1.545)); +#259933 = LINE('',#259934,#259935); +#259934 = CARTESIAN_POINT('',(133.310585,-114.085624,1.545)); +#259935 = VECTOR('',#259936,1.); +#259936 = DIRECTION('',(-0.707106044677,0.707107517695,0.)); +#259937 = ORIENTED_EDGE('',*,*,#259938,.F.); +#259938 = EDGE_CURVE('',#259939,#259931,#259941,.T.); +#259939 = VERTEX_POINT('',#259940); +#259940 = CARTESIAN_POINT('',(132.830546,-113.605584,1.51)); +#259941 = LINE('',#259942,#259943); +#259942 = CARTESIAN_POINT('',(132.830546,-113.605584,1.51)); +#259943 = VECTOR('',#259944,1.); +#259944 = DIRECTION('',(0.,0.,1.)); +#259945 = ORIENTED_EDGE('',*,*,#259946,.F.); +#259946 = EDGE_CURVE('',#259907,#259939,#259947,.T.); +#259947 = LINE('',#259948,#259949); +#259948 = CARTESIAN_POINT('',(133.310585,-114.085624,1.51)); +#259949 = VECTOR('',#259950,1.); +#259950 = DIRECTION('',(-0.707106044677,0.707107517695,0.)); +#259951 = PLANE('',#259952); +#259952 = AXIS2_PLACEMENT_3D('',#259953,#259954,#259955); +#259953 = CARTESIAN_POINT('',(133.310585,-114.085624,1.51)); +#259954 = DIRECTION('',(-0.707107517695,-0.707106044677,0.)); +#259955 = DIRECTION('',(-0.707106044677,0.707107517695,0.)); +#259956 = ADVANCED_FACE('',(#259957),#259984,.T.); +#259957 = FACE_BOUND('',#259958,.T.); +#259958 = EDGE_LOOP('',(#259959,#259960,#259969,#259977)); +#259959 = ORIENTED_EDGE('',*,*,#259938,.T.); +#259960 = ORIENTED_EDGE('',*,*,#259961,.T.); +#259961 = EDGE_CURVE('',#259931,#259962,#259964,.T.); +#259962 = VERTEX_POINT('',#259963); +#259963 = CARTESIAN_POINT('',(132.75,-113.41113,1.545)); +#259964 = CIRCLE('',#259965,0.274993677362); +#259965 = AXIS2_PLACEMENT_3D('',#259966,#259967,#259968); +#259966 = CARTESIAN_POINT('',(133.02499367735,-113.4111318892,1.545)); +#259967 = DIRECTION('',(0.,0.,-1.)); +#259968 = DIRECTION('',(-0.707098720309,-0.707114841973,-0.)); +#259969 = ORIENTED_EDGE('',*,*,#259970,.F.); +#259970 = EDGE_CURVE('',#259971,#259962,#259973,.T.); +#259971 = VERTEX_POINT('',#259972); +#259972 = CARTESIAN_POINT('',(132.75,-113.41113,1.51)); +#259973 = LINE('',#259974,#259975); +#259974 = CARTESIAN_POINT('',(132.75,-113.41113,1.51)); +#259975 = VECTOR('',#259976,1.); +#259976 = DIRECTION('',(0.,0.,1.)); +#259977 = ORIENTED_EDGE('',*,*,#259978,.F.); +#259978 = EDGE_CURVE('',#259939,#259971,#259979,.T.); +#259979 = CIRCLE('',#259980,0.274993677362); +#259980 = AXIS2_PLACEMENT_3D('',#259981,#259982,#259983); +#259981 = CARTESIAN_POINT('',(133.02499367735,-113.4111318892,1.51)); +#259982 = DIRECTION('',(0.,0.,-1.)); +#259983 = DIRECTION('',(-0.707098720309,-0.707114841973,-0.)); +#259984 = CYLINDRICAL_SURFACE('',#259985,0.274993677362); +#259985 = AXIS2_PLACEMENT_3D('',#259986,#259987,#259988); +#259986 = CARTESIAN_POINT('',(133.02499367735,-113.4111318892,1.51)); +#259987 = DIRECTION('',(0.,0.,-1.)); +#259988 = DIRECTION('',(-0.707098720309,-0.707114841973,-0.)); +#259989 = ADVANCED_FACE('',(#259990),#260015,.T.); +#259990 = FACE_BOUND('',#259991,.T.); +#259991 = EDGE_LOOP('',(#259992,#259993,#260001,#260009)); +#259992 = ORIENTED_EDGE('',*,*,#259970,.T.); +#259993 = ORIENTED_EDGE('',*,*,#259994,.T.); +#259994 = EDGE_CURVE('',#259962,#259995,#259997,.T.); +#259995 = VERTEX_POINT('',#259996); +#259996 = CARTESIAN_POINT('',(132.75,-111.58887,1.545)); +#259997 = LINE('',#259998,#259999); +#259998 = CARTESIAN_POINT('',(132.75,-113.41113,1.545)); +#259999 = VECTOR('',#260000,1.); +#260000 = DIRECTION('',(0.,1.,0.)); +#260001 = ORIENTED_EDGE('',*,*,#260002,.F.); +#260002 = EDGE_CURVE('',#260003,#259995,#260005,.T.); +#260003 = VERTEX_POINT('',#260004); +#260004 = CARTESIAN_POINT('',(132.75,-111.58887,1.51)); +#260005 = LINE('',#260006,#260007); +#260006 = CARTESIAN_POINT('',(132.75,-111.58887,1.51)); +#260007 = VECTOR('',#260008,1.); +#260008 = DIRECTION('',(0.,0.,1.)); +#260009 = ORIENTED_EDGE('',*,*,#260010,.F.); +#260010 = EDGE_CURVE('',#259971,#260003,#260011,.T.); +#260011 = LINE('',#260012,#260013); +#260012 = CARTESIAN_POINT('',(132.75,-113.41113,1.51)); +#260013 = VECTOR('',#260014,1.); +#260014 = DIRECTION('',(0.,1.,0.)); +#260015 = PLANE('',#260016); +#260016 = AXIS2_PLACEMENT_3D('',#260017,#260018,#260019); +#260017 = CARTESIAN_POINT('',(132.75,-113.41113,1.51)); +#260018 = DIRECTION('',(-1.,0.,0.)); +#260019 = DIRECTION('',(0.,1.,0.)); +#260020 = ADVANCED_FACE('',(#260021),#260048,.T.); +#260021 = FACE_BOUND('',#260022,.T.); +#260022 = EDGE_LOOP('',(#260023,#260024,#260033,#260041)); +#260023 = ORIENTED_EDGE('',*,*,#260002,.T.); +#260024 = ORIENTED_EDGE('',*,*,#260025,.T.); +#260025 = EDGE_CURVE('',#259995,#260026,#260028,.T.); +#260026 = VERTEX_POINT('',#260027); +#260027 = CARTESIAN_POINT('',(132.830546,-111.394416,1.545)); +#260028 = CIRCLE('',#260029,0.27499641508); +#260029 = AXIS2_PLACEMENT_3D('',#260030,#260031,#260032); +#260030 = CARTESIAN_POINT('',(133.02499641507,-111.5888692447,1.545)); +#260031 = DIRECTION('',(0.,0.,-1.)); +#260032 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#260033 = ORIENTED_EDGE('',*,*,#260034,.F.); +#260034 = EDGE_CURVE('',#260035,#260026,#260037,.T.); +#260035 = VERTEX_POINT('',#260036); +#260036 = CARTESIAN_POINT('',(132.830546,-111.394416,1.51)); +#260037 = LINE('',#260038,#260039); +#260038 = CARTESIAN_POINT('',(132.830546,-111.394416,1.51)); +#260039 = VECTOR('',#260040,1.); +#260040 = DIRECTION('',(0.,0.,1.)); +#260041 = ORIENTED_EDGE('',*,*,#260042,.F.); +#260042 = EDGE_CURVE('',#260003,#260035,#260043,.T.); +#260043 = CIRCLE('',#260044,0.27499641508); +#260044 = AXIS2_PLACEMENT_3D('',#260045,#260046,#260047); +#260045 = CARTESIAN_POINT('',(133.02499641507,-111.5888692447,1.51)); +#260046 = DIRECTION('',(0.,0.,-1.)); +#260047 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#260048 = CYLINDRICAL_SURFACE('',#260049,0.27499641508); +#260049 = AXIS2_PLACEMENT_3D('',#260050,#260051,#260052); +#260050 = CARTESIAN_POINT('',(133.02499641507,-111.5888692447,1.51)); +#260051 = DIRECTION('',(0.,0.,-1.)); +#260052 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#260053 = ADVANCED_FACE('',(#260054),#260079,.T.); +#260054 = FACE_BOUND('',#260055,.T.); +#260055 = EDGE_LOOP('',(#260056,#260057,#260065,#260073)); +#260056 = ORIENTED_EDGE('',*,*,#260034,.T.); +#260057 = ORIENTED_EDGE('',*,*,#260058,.T.); +#260058 = EDGE_CURVE('',#260026,#260059,#260061,.T.); +#260059 = VERTEX_POINT('',#260060); +#260060 = CARTESIAN_POINT('',(133.419416,-110.805546,1.545)); +#260061 = LINE('',#260062,#260063); +#260062 = CARTESIAN_POINT('',(132.830546,-111.394416,1.545)); +#260063 = VECTOR('',#260064,1.); +#260064 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260065 = ORIENTED_EDGE('',*,*,#260066,.F.); +#260066 = EDGE_CURVE('',#260067,#260059,#260069,.T.); +#260067 = VERTEX_POINT('',#260068); +#260068 = CARTESIAN_POINT('',(133.419416,-110.805546,1.51)); +#260069 = LINE('',#260070,#260071); +#260070 = CARTESIAN_POINT('',(133.419416,-110.805546,1.51)); +#260071 = VECTOR('',#260072,1.); +#260072 = DIRECTION('',(0.,0.,1.)); +#260073 = ORIENTED_EDGE('',*,*,#260074,.F.); +#260074 = EDGE_CURVE('',#260035,#260067,#260075,.T.); +#260075 = LINE('',#260076,#260077); +#260076 = CARTESIAN_POINT('',(132.830546,-111.394416,1.51)); +#260077 = VECTOR('',#260078,1.); +#260078 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260079 = PLANE('',#260080); +#260080 = AXIS2_PLACEMENT_3D('',#260081,#260082,#260083); +#260081 = CARTESIAN_POINT('',(132.830546,-111.394416,1.51)); +#260082 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#260083 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260084 = ADVANCED_FACE('',(#260085),#260112,.T.); +#260085 = FACE_BOUND('',#260086,.T.); +#260086 = EDGE_LOOP('',(#260087,#260088,#260097,#260105)); +#260087 = ORIENTED_EDGE('',*,*,#260066,.T.); +#260088 = ORIENTED_EDGE('',*,*,#260089,.T.); +#260089 = EDGE_CURVE('',#260059,#260090,#260092,.T.); +#260090 = VERTEX_POINT('',#260091); +#260091 = CARTESIAN_POINT('',(133.61387,-110.725,1.545)); +#260092 = CIRCLE('',#260093,0.274993677362); +#260093 = AXIS2_PLACEMENT_3D('',#260094,#260095,#260096); +#260094 = CARTESIAN_POINT('',(133.61386811071,-110.9999936773,1.545)); +#260095 = DIRECTION('',(0.,0.,-1.)); +#260096 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#260097 = ORIENTED_EDGE('',*,*,#260098,.F.); +#260098 = EDGE_CURVE('',#260099,#260090,#260101,.T.); +#260099 = VERTEX_POINT('',#260100); +#260100 = CARTESIAN_POINT('',(133.61387,-110.725,1.51)); +#260101 = LINE('',#260102,#260103); +#260102 = CARTESIAN_POINT('',(133.61387,-110.725,1.51)); +#260103 = VECTOR('',#260104,1.); +#260104 = DIRECTION('',(0.,0.,1.)); +#260105 = ORIENTED_EDGE('',*,*,#260106,.F.); +#260106 = EDGE_CURVE('',#260067,#260099,#260107,.T.); +#260107 = CIRCLE('',#260108,0.274993677362); +#260108 = AXIS2_PLACEMENT_3D('',#260109,#260110,#260111); +#260109 = CARTESIAN_POINT('',(133.61386811071,-110.9999936773,1.51)); +#260110 = DIRECTION('',(0.,0.,-1.)); +#260111 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#260112 = CYLINDRICAL_SURFACE('',#260113,0.274993677362); +#260113 = AXIS2_PLACEMENT_3D('',#260114,#260115,#260116); +#260114 = CARTESIAN_POINT('',(133.61386811071,-110.9999936773,1.51)); +#260115 = DIRECTION('',(0.,0.,-1.)); +#260116 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#260117 = ADVANCED_FACE('',(#260118),#260134,.T.); +#260118 = FACE_BOUND('',#260119,.T.); +#260119 = EDGE_LOOP('',(#260120,#260121,#260127,#260128)); +#260120 = ORIENTED_EDGE('',*,*,#260098,.T.); +#260121 = ORIENTED_EDGE('',*,*,#260122,.T.); +#260122 = EDGE_CURVE('',#260090,#259764,#260123,.T.); +#260123 = LINE('',#260124,#260125); +#260124 = CARTESIAN_POINT('',(133.61387,-110.725,1.545)); +#260125 = VECTOR('',#260126,1.); +#260126 = DIRECTION('',(0.999840969542,1.783355333264E-02,0.)); +#260127 = ORIENTED_EDGE('',*,*,#259761,.F.); +#260128 = ORIENTED_EDGE('',*,*,#260129,.F.); +#260129 = EDGE_CURVE('',#260099,#259762,#260130,.T.); +#260130 = LINE('',#260131,#260132); +#260131 = CARTESIAN_POINT('',(133.61387,-110.725,1.51)); +#260132 = VECTOR('',#260133,1.); +#260133 = DIRECTION('',(0.999840969542,1.783355333264E-02,0.)); +#260134 = PLANE('',#260135); +#260135 = AXIS2_PLACEMENT_3D('',#260136,#260137,#260138); +#260136 = CARTESIAN_POINT('',(133.61387,-110.725,1.51)); +#260137 = DIRECTION('',(-1.783355333264E-02,0.999840969542,0.)); +#260138 = DIRECTION('',(0.999840969542,1.783355333264E-02,0.)); +#260139 = ADVANCED_FACE('',(#260140),#260167,.F.); +#260140 = FACE_BOUND('',#260141,.T.); +#260141 = EDGE_LOOP('',(#260142,#260152,#260159,#260160)); +#260142 = ORIENTED_EDGE('',*,*,#260143,.T.); +#260143 = EDGE_CURVE('',#260144,#260146,#260148,.T.); +#260144 = VERTEX_POINT('',#260145); +#260145 = CARTESIAN_POINT('',(133.726125,-113.975,1.51)); +#260146 = VERTEX_POINT('',#260147); +#260147 = CARTESIAN_POINT('',(133.726125,-113.975,1.545)); +#260148 = LINE('',#260149,#260150); +#260149 = CARTESIAN_POINT('',(133.726125,-113.975,1.51)); +#260150 = VECTOR('',#260151,1.); +#260151 = DIRECTION('',(0.,0.,1.)); +#260152 = ORIENTED_EDGE('',*,*,#260153,.T.); +#260153 = EDGE_CURVE('',#260146,#260146,#260154,.T.); +#260154 = CIRCLE('',#260155,0.137255); +#260155 = AXIS2_PLACEMENT_3D('',#260156,#260157,#260158); +#260156 = CARTESIAN_POINT('',(133.58887,-113.975,1.545)); +#260157 = DIRECTION('',(0.,0.,1.)); +#260158 = DIRECTION('',(1.,0.,-0.)); +#260159 = ORIENTED_EDGE('',*,*,#260143,.F.); +#260160 = ORIENTED_EDGE('',*,*,#260161,.F.); +#260161 = EDGE_CURVE('',#260144,#260144,#260162,.T.); +#260162 = CIRCLE('',#260163,0.137255); +#260163 = AXIS2_PLACEMENT_3D('',#260164,#260165,#260166); +#260164 = CARTESIAN_POINT('',(133.58887,-113.975,1.51)); +#260165 = DIRECTION('',(0.,0.,1.)); +#260166 = DIRECTION('',(1.,0.,-0.)); +#260167 = CYLINDRICAL_SURFACE('',#260168,0.137255); +#260168 = AXIS2_PLACEMENT_3D('',#260169,#260170,#260171); +#260169 = CARTESIAN_POINT('',(133.58887,-113.975,1.51)); +#260170 = DIRECTION('',(-0.,-0.,-1.)); +#260171 = DIRECTION('',(1.,0.,-0.)); +#260172 = ADVANCED_FACE('',(#260173),#260200,.F.); +#260173 = FACE_BOUND('',#260174,.T.); +#260174 = EDGE_LOOP('',(#260175,#260185,#260192,#260193)); +#260175 = ORIENTED_EDGE('',*,*,#260176,.T.); +#260176 = EDGE_CURVE('',#260177,#260179,#260181,.T.); +#260177 = VERTEX_POINT('',#260178); +#260178 = CARTESIAN_POINT('',(133.987255,-111.,1.51)); +#260179 = VERTEX_POINT('',#260180); +#260180 = CARTESIAN_POINT('',(133.987255,-111.,1.545)); +#260181 = LINE('',#260182,#260183); +#260182 = CARTESIAN_POINT('',(133.987255,-111.,1.51)); +#260183 = VECTOR('',#260184,1.); +#260184 = DIRECTION('',(0.,0.,1.)); +#260185 = ORIENTED_EDGE('',*,*,#260186,.T.); +#260186 = EDGE_CURVE('',#260179,#260179,#260187,.T.); +#260187 = CIRCLE('',#260188,0.137255); +#260188 = AXIS2_PLACEMENT_3D('',#260189,#260190,#260191); +#260189 = CARTESIAN_POINT('',(133.85,-111.,1.545)); +#260190 = DIRECTION('',(0.,0.,1.)); +#260191 = DIRECTION('',(1.,0.,-0.)); +#260192 = ORIENTED_EDGE('',*,*,#260176,.F.); +#260193 = ORIENTED_EDGE('',*,*,#260194,.F.); +#260194 = EDGE_CURVE('',#260177,#260177,#260195,.T.); +#260195 = CIRCLE('',#260196,0.137255); +#260196 = AXIS2_PLACEMENT_3D('',#260197,#260198,#260199); +#260197 = CARTESIAN_POINT('',(133.85,-111.,1.51)); +#260198 = DIRECTION('',(0.,0.,1.)); +#260199 = DIRECTION('',(1.,0.,-0.)); +#260200 = CYLINDRICAL_SURFACE('',#260201,0.137255); +#260201 = AXIS2_PLACEMENT_3D('',#260202,#260203,#260204); +#260202 = CARTESIAN_POINT('',(133.85,-111.,1.51)); +#260203 = DIRECTION('',(-0.,-0.,-1.)); +#260204 = DIRECTION('',(1.,0.,-0.)); +#260205 = ADVANCED_FACE('',(#260206,#260220,#260223),#260226,.F.); +#260206 = FACE_BOUND('',#260207,.T.); +#260207 = EDGE_LOOP('',(#260208,#260209,#260210,#260211,#260212,#260213, + #260214,#260215,#260216,#260217,#260218,#260219)); +#260208 = ORIENTED_EDGE('',*,*,#259788,.T.); +#260209 = ORIENTED_EDGE('',*,*,#259820,.T.); +#260210 = ORIENTED_EDGE('',*,*,#259851,.T.); +#260211 = ORIENTED_EDGE('',*,*,#259882,.T.); +#260212 = ORIENTED_EDGE('',*,*,#259914,.T.); +#260213 = ORIENTED_EDGE('',*,*,#259946,.T.); +#260214 = ORIENTED_EDGE('',*,*,#259978,.T.); +#260215 = ORIENTED_EDGE('',*,*,#260010,.T.); +#260216 = ORIENTED_EDGE('',*,*,#260042,.T.); +#260217 = ORIENTED_EDGE('',*,*,#260074,.T.); +#260218 = ORIENTED_EDGE('',*,*,#260106,.T.); +#260219 = ORIENTED_EDGE('',*,*,#260129,.T.); +#260220 = FACE_BOUND('',#260221,.T.); +#260221 = EDGE_LOOP('',(#260222)); +#260222 = ORIENTED_EDGE('',*,*,#260161,.T.); +#260223 = FACE_BOUND('',#260224,.T.); +#260224 = EDGE_LOOP('',(#260225)); +#260225 = ORIENTED_EDGE('',*,*,#260194,.T.); +#260226 = PLANE('',#260227); +#260227 = AXIS2_PLACEMENT_3D('',#260228,#260229,#260230); +#260228 = CARTESIAN_POINT('',(0.,0.,1.51)); +#260229 = DIRECTION('',(0.,0.,1.)); +#260230 = DIRECTION('',(1.,0.,-0.)); +#260231 = ADVANCED_FACE('',(#260232,#260246,#260249),#260252,.T.); +#260232 = FACE_BOUND('',#260233,.F.); +#260233 = EDGE_LOOP('',(#260234,#260235,#260236,#260237,#260238,#260239, + #260240,#260241,#260242,#260243,#260244,#260245)); +#260234 = ORIENTED_EDGE('',*,*,#259771,.T.); +#260235 = ORIENTED_EDGE('',*,*,#259804,.T.); +#260236 = ORIENTED_EDGE('',*,*,#259835,.T.); +#260237 = ORIENTED_EDGE('',*,*,#259866,.T.); +#260238 = ORIENTED_EDGE('',*,*,#259897,.T.); +#260239 = ORIENTED_EDGE('',*,*,#259930,.T.); +#260240 = ORIENTED_EDGE('',*,*,#259961,.T.); +#260241 = ORIENTED_EDGE('',*,*,#259994,.T.); +#260242 = ORIENTED_EDGE('',*,*,#260025,.T.); +#260243 = ORIENTED_EDGE('',*,*,#260058,.T.); +#260244 = ORIENTED_EDGE('',*,*,#260089,.T.); +#260245 = ORIENTED_EDGE('',*,*,#260122,.T.); +#260246 = FACE_BOUND('',#260247,.F.); +#260247 = EDGE_LOOP('',(#260248)); +#260248 = ORIENTED_EDGE('',*,*,#260153,.T.); +#260249 = FACE_BOUND('',#260250,.F.); +#260250 = EDGE_LOOP('',(#260251)); +#260251 = ORIENTED_EDGE('',*,*,#260186,.T.); +#260252 = PLANE('',#260253); +#260253 = AXIS2_PLACEMENT_3D('',#260254,#260255,#260256); +#260254 = CARTESIAN_POINT('',(0.,0.,1.545)); +#260255 = DIRECTION('',(0.,0.,1.)); +#260256 = DIRECTION('',(1.,0.,-0.)); +#260257 = MANIFOLD_SOLID_BREP('',#260258); +#260258 = CLOSED_SHELL('',(#260259,#260301,#260332,#260363,#260396, + #260427,#260460,#260491,#260522,#260553,#260584,#260617,#260648, + #260679,#260712,#260734,#260767,#260793)); +#260259 = ADVANCED_FACE('',(#260260),#260296,.T.); +#260260 = FACE_BOUND('',#260261,.F.); +#260261 = EDGE_LOOP('',(#260262,#260272,#260281,#260289)); +#260262 = ORIENTED_EDGE('',*,*,#260263,.T.); +#260263 = EDGE_CURVE('',#260264,#260266,#260268,.T.); +#260264 = VERTEX_POINT('',#260265); +#260265 = CARTESIAN_POINT('',(150.694454,-113.305545,0.)); +#260266 = VERTEX_POINT('',#260267); +#260267 = CARTESIAN_POINT('',(150.694454,-113.305545,-3.5E-02)); +#260268 = LINE('',#260269,#260270); +#260269 = CARTESIAN_POINT('',(150.694454,-113.305545,0.)); +#260270 = VECTOR('',#260271,1.); +#260271 = DIRECTION('',(0.,0.,-1.)); +#260272 = ORIENTED_EDGE('',*,*,#260273,.T.); +#260273 = EDGE_CURVE('',#260266,#260274,#260276,.T.); +#260274 = VERTEX_POINT('',#260275); +#260275 = CARTESIAN_POINT('',(150.775,-113.5,-3.5E-02)); +#260276 = CIRCLE('',#260277,0.275002697077); +#260277 = AXIS2_PLACEMENT_3D('',#260278,#260279,#260280); +#260278 = CARTESIAN_POINT('',(150.49999730292,-113.5000008468,-3.5E-02) + ); +#260279 = DIRECTION('',(0.,0.,-1.)); +#260280 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#260281 = ORIENTED_EDGE('',*,*,#260282,.F.); +#260282 = EDGE_CURVE('',#260283,#260274,#260285,.T.); +#260283 = VERTEX_POINT('',#260284); +#260284 = CARTESIAN_POINT('',(150.775,-113.5,0.)); +#260285 = LINE('',#260286,#260287); +#260286 = CARTESIAN_POINT('',(150.775,-113.5,0.)); +#260287 = VECTOR('',#260288,1.); +#260288 = DIRECTION('',(0.,0.,-1.)); +#260289 = ORIENTED_EDGE('',*,*,#260290,.F.); +#260290 = EDGE_CURVE('',#260264,#260283,#260291,.T.); +#260291 = CIRCLE('',#260292,0.275002697077); +#260292 = AXIS2_PLACEMENT_3D('',#260293,#260294,#260295); +#260293 = CARTESIAN_POINT('',(150.49999730292,-113.5000008468,0.)); +#260294 = DIRECTION('',(0.,0.,-1.)); +#260295 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#260296 = CYLINDRICAL_SURFACE('',#260297,0.275002697077); +#260297 = AXIS2_PLACEMENT_3D('',#260298,#260299,#260300); +#260298 = CARTESIAN_POINT('',(150.49999730292,-113.5000008468,0.)); +#260299 = DIRECTION('',(-0.,-0.,1.)); +#260300 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#260301 = ADVANCED_FACE('',(#260302),#260327,.F.); +#260302 = FACE_BOUND('',#260303,.F.); +#260303 = EDGE_LOOP('',(#260304,#260305,#260313,#260321)); +#260304 = ORIENTED_EDGE('',*,*,#260282,.T.); +#260305 = ORIENTED_EDGE('',*,*,#260306,.T.); +#260306 = EDGE_CURVE('',#260274,#260307,#260309,.T.); +#260307 = VERTEX_POINT('',#260308); +#260308 = CARTESIAN_POINT('',(150.775,-115.783578,-3.5E-02)); +#260309 = LINE('',#260310,#260311); +#260310 = CARTESIAN_POINT('',(150.775,-113.5,-3.5E-02)); +#260311 = VECTOR('',#260312,1.); +#260312 = DIRECTION('',(0.,-1.,0.)); +#260313 = ORIENTED_EDGE('',*,*,#260314,.F.); +#260314 = EDGE_CURVE('',#260315,#260307,#260317,.T.); +#260315 = VERTEX_POINT('',#260316); +#260316 = CARTESIAN_POINT('',(150.775,-115.783578,0.)); +#260317 = LINE('',#260318,#260319); +#260318 = CARTESIAN_POINT('',(150.775,-115.783578,0.)); +#260319 = VECTOR('',#260320,1.); +#260320 = DIRECTION('',(0.,0.,-1.)); +#260321 = ORIENTED_EDGE('',*,*,#260322,.F.); +#260322 = EDGE_CURVE('',#260283,#260315,#260323,.T.); +#260323 = LINE('',#260324,#260325); +#260324 = CARTESIAN_POINT('',(150.775,-113.5,0.)); +#260325 = VECTOR('',#260326,1.); +#260326 = DIRECTION('',(0.,-1.,0.)); +#260327 = PLANE('',#260328); +#260328 = AXIS2_PLACEMENT_3D('',#260329,#260330,#260331); +#260329 = CARTESIAN_POINT('',(150.775,-113.5,0.)); +#260330 = DIRECTION('',(-1.,-0.,-0.)); +#260331 = DIRECTION('',(0.,-1.,0.)); +#260332 = ADVANCED_FACE('',(#260333),#260358,.F.); +#260333 = FACE_BOUND('',#260334,.F.); +#260334 = EDGE_LOOP('',(#260335,#260336,#260344,#260352)); +#260335 = ORIENTED_EDGE('',*,*,#260314,.T.); +#260336 = ORIENTED_EDGE('',*,*,#260337,.T.); +#260337 = EDGE_CURVE('',#260307,#260338,#260340,.T.); +#260338 = VERTEX_POINT('',#260339); +#260339 = CARTESIAN_POINT('',(151.700155,-114.858423,-3.5E-02)); +#260340 = LINE('',#260341,#260342); +#260341 = CARTESIAN_POINT('',(150.775,-115.783578,-3.5E-02)); +#260342 = VECTOR('',#260343,1.); +#260343 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260344 = ORIENTED_EDGE('',*,*,#260345,.F.); +#260345 = EDGE_CURVE('',#260346,#260338,#260348,.T.); +#260346 = VERTEX_POINT('',#260347); +#260347 = CARTESIAN_POINT('',(151.700155,-114.858423,0.)); +#260348 = LINE('',#260349,#260350); +#260349 = CARTESIAN_POINT('',(151.700155,-114.858423,0.)); +#260350 = VECTOR('',#260351,1.); +#260351 = DIRECTION('',(0.,0.,-1.)); +#260352 = ORIENTED_EDGE('',*,*,#260353,.F.); +#260353 = EDGE_CURVE('',#260315,#260346,#260354,.T.); +#260354 = LINE('',#260355,#260356); +#260355 = CARTESIAN_POINT('',(150.775,-115.783578,0.)); +#260356 = VECTOR('',#260357,1.); +#260357 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260358 = PLANE('',#260359); +#260359 = AXIS2_PLACEMENT_3D('',#260360,#260361,#260362); +#260360 = CARTESIAN_POINT('',(150.775,-115.783578,0.)); +#260361 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#260362 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#260363 = ADVANCED_FACE('',(#260364),#260391,.T.); +#260364 = FACE_BOUND('',#260365,.F.); +#260365 = EDGE_LOOP('',(#260366,#260367,#260376,#260384)); +#260366 = ORIENTED_EDGE('',*,*,#260345,.T.); +#260367 = ORIENTED_EDGE('',*,*,#260368,.T.); +#260368 = EDGE_CURVE('',#260338,#260369,#260371,.T.); +#260369 = VERTEX_POINT('',#260370); +#260370 = CARTESIAN_POINT('',(151.744443,-114.776853,-3.5E-02)); +#260371 = CIRCLE('',#260372,9.844707132367E-02); +#260372 = AXIS2_PLACEMENT_3D('',#260373,#260374,#260375); +#260373 = CARTESIAN_POINT('',(151.79859997659,-114.8590652116,-3.5E-02) + ); +#260374 = DIRECTION('',(0.,0.,-1.)); +#260375 = DIRECTION('',(-0.999978722268,6.523420204094E-03,0.)); +#260376 = ORIENTED_EDGE('',*,*,#260377,.F.); +#260377 = EDGE_CURVE('',#260378,#260369,#260380,.T.); +#260378 = VERTEX_POINT('',#260379); +#260379 = CARTESIAN_POINT('',(151.744443,-114.776853,0.)); +#260380 = LINE('',#260381,#260382); +#260381 = CARTESIAN_POINT('',(151.744443,-114.776853,0.)); +#260382 = VECTOR('',#260383,1.); +#260383 = DIRECTION('',(0.,0.,-1.)); +#260384 = ORIENTED_EDGE('',*,*,#260385,.F.); +#260385 = EDGE_CURVE('',#260346,#260378,#260386,.T.); +#260386 = CIRCLE('',#260387,9.844707132367E-02); +#260387 = AXIS2_PLACEMENT_3D('',#260388,#260389,#260390); +#260388 = CARTESIAN_POINT('',(151.79859997659,-114.8590652116,0.)); +#260389 = DIRECTION('',(0.,0.,-1.)); +#260390 = DIRECTION('',(-0.999978722268,6.523420204094E-03,0.)); +#260391 = CYLINDRICAL_SURFACE('',#260392,9.844707132367E-02); +#260392 = AXIS2_PLACEMENT_3D('',#260393,#260394,#260395); +#260393 = CARTESIAN_POINT('',(151.79859997659,-114.8590652116,0.)); +#260394 = DIRECTION('',(-0.,-0.,1.)); +#260395 = DIRECTION('',(-0.999978722268,6.523420204094E-03,0.)); +#260396 = ADVANCED_FACE('',(#260397),#260422,.F.); +#260397 = FACE_BOUND('',#260398,.F.); +#260398 = EDGE_LOOP('',(#260399,#260400,#260408,#260416)); +#260399 = ORIENTED_EDGE('',*,*,#260377,.T.); +#260400 = ORIENTED_EDGE('',*,*,#260401,.T.); +#260401 = EDGE_CURVE('',#260369,#260402,#260404,.T.); +#260402 = VERTEX_POINT('',#260403); +#260403 = CARTESIAN_POINT('',(151.780491,-114.761921,-3.5E-02)); +#260404 = LINE('',#260405,#260406); +#260405 = CARTESIAN_POINT('',(151.744443,-114.776853,-3.5E-02)); +#260406 = VECTOR('',#260407,1.); +#260407 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#260408 = ORIENTED_EDGE('',*,*,#260409,.F.); +#260409 = EDGE_CURVE('',#260410,#260402,#260412,.T.); +#260410 = VERTEX_POINT('',#260411); +#260411 = CARTESIAN_POINT('',(151.780491,-114.761921,0.)); +#260412 = LINE('',#260413,#260414); +#260413 = CARTESIAN_POINT('',(151.780491,-114.761921,0.)); +#260414 = VECTOR('',#260415,1.); +#260415 = DIRECTION('',(0.,0.,-1.)); +#260416 = ORIENTED_EDGE('',*,*,#260417,.F.); +#260417 = EDGE_CURVE('',#260378,#260410,#260418,.T.); +#260418 = LINE('',#260419,#260420); +#260419 = CARTESIAN_POINT('',(151.744443,-114.776853,0.)); +#260420 = VECTOR('',#260421,1.); +#260421 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#260422 = PLANE('',#260423); +#260423 = AXIS2_PLACEMENT_3D('',#260424,#260425,#260426); +#260424 = CARTESIAN_POINT('',(151.744443,-114.776853,0.)); +#260425 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#260426 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#260427 = ADVANCED_FACE('',(#260428),#260455,.T.); +#260428 = FACE_BOUND('',#260429,.F.); +#260429 = EDGE_LOOP('',(#260430,#260431,#260440,#260448)); +#260430 = ORIENTED_EDGE('',*,*,#260409,.T.); +#260431 = ORIENTED_EDGE('',*,*,#260432,.T.); +#260432 = EDGE_CURVE('',#260402,#260433,#260435,.T.); +#260433 = VERTEX_POINT('',#260434); +#260434 = CARTESIAN_POINT('',(151.898079,-114.840491,-3.5E-02)); +#260435 = CIRCLE('',#260436,0.100001512409); +#260436 = AXIS2_PLACEMENT_3D('',#260437,#260438,#260439); +#260437 = CARTESIAN_POINT('',(151.79999917046,-114.8600012414,-3.5E-02) + ); +#260438 = DIRECTION('',(0.,0.,-1.)); +#260439 = DIRECTION('',(-0.195078754269,0.9807875813,0.)); +#260440 = ORIENTED_EDGE('',*,*,#260441,.F.); +#260441 = EDGE_CURVE('',#260442,#260433,#260444,.T.); +#260442 = VERTEX_POINT('',#260443); +#260443 = CARTESIAN_POINT('',(151.898079,-114.840491,0.)); +#260444 = LINE('',#260445,#260446); +#260445 = CARTESIAN_POINT('',(151.898079,-114.840491,0.)); +#260446 = VECTOR('',#260447,1.); +#260447 = DIRECTION('',(0.,0.,-1.)); +#260448 = ORIENTED_EDGE('',*,*,#260449,.F.); +#260449 = EDGE_CURVE('',#260410,#260442,#260450,.T.); +#260450 = CIRCLE('',#260451,0.100001512409); +#260451 = AXIS2_PLACEMENT_3D('',#260452,#260453,#260454); +#260452 = CARTESIAN_POINT('',(151.79999917046,-114.8600012414,0.)); +#260453 = DIRECTION('',(0.,0.,-1.)); +#260454 = DIRECTION('',(-0.195078754269,0.9807875813,0.)); +#260455 = CYLINDRICAL_SURFACE('',#260456,0.100001512409); +#260456 = AXIS2_PLACEMENT_3D('',#260457,#260458,#260459); +#260457 = CARTESIAN_POINT('',(151.79999917046,-114.8600012414,0.)); +#260458 = DIRECTION('',(-0.,-0.,1.)); +#260459 = DIRECTION('',(-0.195078754269,0.9807875813,0.)); +#260460 = ADVANCED_FACE('',(#260461),#260486,.F.); +#260461 = FACE_BOUND('',#260462,.F.); +#260462 = EDGE_LOOP('',(#260463,#260464,#260472,#260480)); +#260463 = ORIENTED_EDGE('',*,*,#260441,.T.); +#260464 = ORIENTED_EDGE('',*,*,#260465,.T.); +#260465 = EDGE_CURVE('',#260433,#260466,#260468,.T.); +#260466 = VERTEX_POINT('',#260467); +#260467 = CARTESIAN_POINT('',(151.898079,-114.919509,-3.5E-02)); +#260468 = LINE('',#260469,#260470); +#260469 = CARTESIAN_POINT('',(151.898079,-114.840491,-3.5E-02)); +#260470 = VECTOR('',#260471,1.); +#260471 = DIRECTION('',(0.,-1.,0.)); +#260472 = ORIENTED_EDGE('',*,*,#260473,.F.); +#260473 = EDGE_CURVE('',#260474,#260466,#260476,.T.); +#260474 = VERTEX_POINT('',#260475); +#260475 = CARTESIAN_POINT('',(151.898079,-114.919509,0.)); +#260476 = LINE('',#260477,#260478); +#260477 = CARTESIAN_POINT('',(151.898079,-114.919509,0.)); +#260478 = VECTOR('',#260479,1.); +#260479 = DIRECTION('',(0.,0.,-1.)); +#260480 = ORIENTED_EDGE('',*,*,#260481,.F.); +#260481 = EDGE_CURVE('',#260442,#260474,#260482,.T.); +#260482 = LINE('',#260483,#260484); +#260483 = CARTESIAN_POINT('',(151.898079,-114.840491,0.)); +#260484 = VECTOR('',#260485,1.); +#260485 = DIRECTION('',(0.,-1.,0.)); +#260486 = PLANE('',#260487); +#260487 = AXIS2_PLACEMENT_3D('',#260488,#260489,#260490); +#260488 = CARTESIAN_POINT('',(151.898079,-114.840491,0.)); +#260489 = DIRECTION('',(-1.,-0.,-0.)); +#260490 = DIRECTION('',(0.,-1.,0.)); +#260491 = ADVANCED_FACE('',(#260492),#260517,.F.); +#260492 = FACE_BOUND('',#260493,.F.); +#260493 = EDGE_LOOP('',(#260494,#260495,#260503,#260511)); +#260494 = ORIENTED_EDGE('',*,*,#260473,.T.); +#260495 = ORIENTED_EDGE('',*,*,#260496,.T.); +#260496 = EDGE_CURVE('',#260466,#260497,#260499,.T.); +#260497 = VERTEX_POINT('',#260498); +#260498 = CARTESIAN_POINT('',(151.883148,-114.955557,-3.5E-02)); +#260499 = LINE('',#260500,#260501); +#260500 = CARTESIAN_POINT('',(151.898079,-114.919509,-3.5E-02)); +#260501 = VECTOR('',#260502,1.); +#260502 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#260503 = ORIENTED_EDGE('',*,*,#260504,.F.); +#260504 = EDGE_CURVE('',#260505,#260497,#260507,.T.); +#260505 = VERTEX_POINT('',#260506); +#260506 = CARTESIAN_POINT('',(151.883148,-114.955557,0.)); +#260507 = LINE('',#260508,#260509); +#260508 = CARTESIAN_POINT('',(151.883148,-114.955557,0.)); +#260509 = VECTOR('',#260510,1.); +#260510 = DIRECTION('',(0.,0.,-1.)); +#260511 = ORIENTED_EDGE('',*,*,#260512,.F.); +#260512 = EDGE_CURVE('',#260474,#260505,#260513,.T.); +#260513 = LINE('',#260514,#260515); +#260514 = CARTESIAN_POINT('',(151.898079,-114.919509,0.)); +#260515 = VECTOR('',#260516,1.); +#260516 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#260517 = PLANE('',#260518); +#260518 = AXIS2_PLACEMENT_3D('',#260519,#260520,#260521); +#260519 = CARTESIAN_POINT('',(151.898079,-114.919509,0.)); +#260520 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#260521 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#260522 = ADVANCED_FACE('',(#260523),#260548,.F.); +#260523 = FACE_BOUND('',#260524,.F.); +#260524 = EDGE_LOOP('',(#260525,#260526,#260534,#260542)); +#260525 = ORIENTED_EDGE('',*,*,#260504,.T.); +#260526 = ORIENTED_EDGE('',*,*,#260527,.T.); +#260527 = EDGE_CURVE('',#260497,#260528,#260530,.T.); +#260528 = VERTEX_POINT('',#260529); +#260529 = CARTESIAN_POINT('',(150.775,-116.066421,-3.5E-02)); +#260530 = LINE('',#260531,#260532); +#260531 = CARTESIAN_POINT('',(151.883148,-114.955557,-3.5E-02)); +#260532 = VECTOR('',#260533,1.); +#260533 = DIRECTION('',(-0.706240776003,-0.707971727056,0.)); +#260534 = ORIENTED_EDGE('',*,*,#260535,.F.); +#260535 = EDGE_CURVE('',#260536,#260528,#260538,.T.); +#260536 = VERTEX_POINT('',#260537); +#260537 = CARTESIAN_POINT('',(150.775,-116.066421,0.)); +#260538 = LINE('',#260539,#260540); +#260539 = CARTESIAN_POINT('',(150.775,-116.066421,0.)); +#260540 = VECTOR('',#260541,1.); +#260541 = DIRECTION('',(0.,0.,-1.)); +#260542 = ORIENTED_EDGE('',*,*,#260543,.F.); +#260543 = EDGE_CURVE('',#260505,#260536,#260544,.T.); +#260544 = LINE('',#260545,#260546); +#260545 = CARTESIAN_POINT('',(151.883148,-114.955557,0.)); +#260546 = VECTOR('',#260547,1.); +#260547 = DIRECTION('',(-0.706240776003,-0.707971727056,0.)); +#260548 = PLANE('',#260549); +#260549 = AXIS2_PLACEMENT_3D('',#260550,#260551,#260552); +#260550 = CARTESIAN_POINT('',(151.883148,-114.955557,0.)); +#260551 = DIRECTION('',(-0.707971727056,0.706240776003,0.)); +#260552 = DIRECTION('',(-0.706240776003,-0.707971727056,0.)); +#260553 = ADVANCED_FACE('',(#260554),#260579,.F.); +#260554 = FACE_BOUND('',#260555,.F.); +#260555 = EDGE_LOOP('',(#260556,#260557,#260565,#260573)); +#260556 = ORIENTED_EDGE('',*,*,#260535,.T.); +#260557 = ORIENTED_EDGE('',*,*,#260558,.T.); +#260558 = EDGE_CURVE('',#260528,#260559,#260561,.T.); +#260559 = VERTEX_POINT('',#260560); +#260560 = CARTESIAN_POINT('',(150.775,-117.,-3.5E-02)); +#260561 = LINE('',#260562,#260563); +#260562 = CARTESIAN_POINT('',(150.775,-116.066421,-3.5E-02)); +#260563 = VECTOR('',#260564,1.); +#260564 = DIRECTION('',(0.,-1.,0.)); +#260565 = ORIENTED_EDGE('',*,*,#260566,.F.); +#260566 = EDGE_CURVE('',#260567,#260559,#260569,.T.); +#260567 = VERTEX_POINT('',#260568); +#260568 = CARTESIAN_POINT('',(150.775,-117.,0.)); +#260569 = LINE('',#260570,#260571); +#260570 = CARTESIAN_POINT('',(150.775,-117.,0.)); +#260571 = VECTOR('',#260572,1.); +#260572 = DIRECTION('',(0.,0.,-1.)); +#260573 = ORIENTED_EDGE('',*,*,#260574,.F.); +#260574 = EDGE_CURVE('',#260536,#260567,#260575,.T.); +#260575 = LINE('',#260576,#260577); +#260576 = CARTESIAN_POINT('',(150.775,-116.066421,0.)); +#260577 = VECTOR('',#260578,1.); +#260578 = DIRECTION('',(0.,-1.,0.)); +#260579 = PLANE('',#260580); +#260580 = AXIS2_PLACEMENT_3D('',#260581,#260582,#260583); +#260581 = CARTESIAN_POINT('',(150.775,-116.066421,0.)); +#260582 = DIRECTION('',(-1.,-0.,-0.)); +#260583 = DIRECTION('',(0.,-1.,0.)); +#260584 = ADVANCED_FACE('',(#260585),#260612,.T.); +#260585 = FACE_BOUND('',#260586,.F.); +#260586 = EDGE_LOOP('',(#260587,#260588,#260597,#260605)); +#260587 = ORIENTED_EDGE('',*,*,#260566,.T.); +#260588 = ORIENTED_EDGE('',*,*,#260589,.T.); +#260589 = EDGE_CURVE('',#260559,#260590,#260592,.T.); +#260590 = VERTEX_POINT('',#260591); +#260591 = CARTESIAN_POINT('',(150.225,-117.,-3.5E-02)); +#260592 = CIRCLE('',#260593,0.275); +#260593 = AXIS2_PLACEMENT_3D('',#260594,#260595,#260596); +#260594 = CARTESIAN_POINT('',(150.5,-117.00000008,-3.5E-02)); +#260595 = DIRECTION('',(0.,0.,-1.)); +#260596 = DIRECTION('',(1.,2.909187783602E-07,0.)); +#260597 = ORIENTED_EDGE('',*,*,#260598,.F.); +#260598 = EDGE_CURVE('',#260599,#260590,#260601,.T.); +#260599 = VERTEX_POINT('',#260600); +#260600 = CARTESIAN_POINT('',(150.225,-117.,0.)); +#260601 = LINE('',#260602,#260603); +#260602 = CARTESIAN_POINT('',(150.225,-117.,0.)); +#260603 = VECTOR('',#260604,1.); +#260604 = DIRECTION('',(0.,0.,-1.)); +#260605 = ORIENTED_EDGE('',*,*,#260606,.F.); +#260606 = EDGE_CURVE('',#260567,#260599,#260607,.T.); +#260607 = CIRCLE('',#260608,0.275); +#260608 = AXIS2_PLACEMENT_3D('',#260609,#260610,#260611); +#260609 = CARTESIAN_POINT('',(150.5,-117.00000008,0.)); +#260610 = DIRECTION('',(0.,0.,-1.)); +#260611 = DIRECTION('',(1.,2.909187783602E-07,0.)); +#260612 = CYLINDRICAL_SURFACE('',#260613,0.275); +#260613 = AXIS2_PLACEMENT_3D('',#260614,#260615,#260616); +#260614 = CARTESIAN_POINT('',(150.5,-117.00000008,0.)); +#260615 = DIRECTION('',(-0.,-0.,1.)); +#260616 = DIRECTION('',(1.,2.909187783602E-07,0.)); +#260617 = ADVANCED_FACE('',(#260618),#260643,.F.); +#260618 = FACE_BOUND('',#260619,.F.); +#260619 = EDGE_LOOP('',(#260620,#260621,#260629,#260637)); +#260620 = ORIENTED_EDGE('',*,*,#260598,.T.); +#260621 = ORIENTED_EDGE('',*,*,#260622,.T.); +#260622 = EDGE_CURVE('',#260590,#260623,#260625,.T.); +#260623 = VERTEX_POINT('',#260624); +#260624 = CARTESIAN_POINT('',(150.225,-113.613908,-3.5E-02)); +#260625 = LINE('',#260626,#260627); +#260626 = CARTESIAN_POINT('',(150.225,-117.,-3.5E-02)); +#260627 = VECTOR('',#260628,1.); +#260628 = DIRECTION('',(0.,1.,0.)); +#260629 = ORIENTED_EDGE('',*,*,#260630,.F.); +#260630 = EDGE_CURVE('',#260631,#260623,#260633,.T.); +#260631 = VERTEX_POINT('',#260632); +#260632 = CARTESIAN_POINT('',(150.225,-113.613908,0.)); +#260633 = LINE('',#260634,#260635); +#260634 = CARTESIAN_POINT('',(150.225,-113.613908,0.)); +#260635 = VECTOR('',#260636,1.); +#260636 = DIRECTION('',(0.,0.,-1.)); +#260637 = ORIENTED_EDGE('',*,*,#260638,.F.); +#260638 = EDGE_CURVE('',#260599,#260631,#260639,.T.); +#260639 = LINE('',#260640,#260641); +#260640 = CARTESIAN_POINT('',(150.225,-117.,0.)); +#260641 = VECTOR('',#260642,1.); +#260642 = DIRECTION('',(0.,1.,0.)); +#260643 = PLANE('',#260644); +#260644 = AXIS2_PLACEMENT_3D('',#260645,#260646,#260647); +#260645 = CARTESIAN_POINT('',(150.225,-117.,0.)); +#260646 = DIRECTION('',(1.,-0.,0.)); +#260647 = DIRECTION('',(0.,1.,0.)); +#260648 = ADVANCED_FACE('',(#260649),#260674,.F.); +#260649 = FACE_BOUND('',#260650,.F.); +#260650 = EDGE_LOOP('',(#260651,#260652,#260660,#260668)); +#260651 = ORIENTED_EDGE('',*,*,#260630,.T.); +#260652 = ORIENTED_EDGE('',*,*,#260653,.T.); +#260653 = EDGE_CURVE('',#260623,#260654,#260656,.T.); +#260654 = VERTEX_POINT('',#260655); +#260655 = CARTESIAN_POINT('',(148.885195,-112.277164,-3.5E-02)); +#260656 = LINE('',#260657,#260658); +#260657 = CARTESIAN_POINT('',(150.225,-113.613908,-3.5E-02)); +#260658 = VECTOR('',#260659,1.); +#260659 = DIRECTION('',(-0.707914991598,0.706297645947,0.)); +#260660 = ORIENTED_EDGE('',*,*,#260661,.F.); +#260661 = EDGE_CURVE('',#260662,#260654,#260664,.T.); +#260662 = VERTEX_POINT('',#260663); +#260663 = CARTESIAN_POINT('',(148.885195,-112.277164,0.)); +#260664 = LINE('',#260665,#260666); +#260665 = CARTESIAN_POINT('',(148.885195,-112.277164,0.)); +#260666 = VECTOR('',#260667,1.); +#260667 = DIRECTION('',(0.,0.,-1.)); +#260668 = ORIENTED_EDGE('',*,*,#260669,.F.); +#260669 = EDGE_CURVE('',#260631,#260662,#260670,.T.); +#260670 = LINE('',#260671,#260672); +#260671 = CARTESIAN_POINT('',(150.225,-113.613908,0.)); +#260672 = VECTOR('',#260673,1.); +#260673 = DIRECTION('',(-0.707914991598,0.706297645947,0.)); +#260674 = PLANE('',#260675); +#260675 = AXIS2_PLACEMENT_3D('',#260676,#260677,#260678); +#260676 = CARTESIAN_POINT('',(150.225,-113.613908,0.)); +#260677 = DIRECTION('',(0.706297645947,0.707914991598,0.)); +#260678 = DIRECTION('',(-0.707914991598,0.706297645947,0.)); +#260679 = ADVANCED_FACE('',(#260680),#260707,.T.); +#260680 = FACE_BOUND('',#260681,.F.); +#260681 = EDGE_LOOP('',(#260682,#260683,#260692,#260700)); +#260682 = ORIENTED_EDGE('',*,*,#260661,.T.); +#260683 = ORIENTED_EDGE('',*,*,#260684,.T.); +#260684 = EDGE_CURVE('',#260654,#260685,#260687,.T.); +#260685 = VERTEX_POINT('',#260686); +#260686 = CARTESIAN_POINT('',(149.278284,-111.889376,-3.5E-02)); +#260687 = CIRCLE('',#260688,0.299746720158); +#260688 = AXIS2_PLACEMENT_3D('',#260689,#260690,#260691); +#260689 = CARTESIAN_POINT('',(148.99976842403,-112.0001783925,-3.5E-02) + ); +#260690 = DIRECTION('',(0.,0.,-1.)); +#260691 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#260692 = ORIENTED_EDGE('',*,*,#260693,.F.); +#260693 = EDGE_CURVE('',#260694,#260685,#260696,.T.); +#260694 = VERTEX_POINT('',#260695); +#260695 = CARTESIAN_POINT('',(149.278284,-111.889376,0.)); +#260696 = LINE('',#260697,#260698); +#260697 = CARTESIAN_POINT('',(149.278284,-111.889376,0.)); +#260698 = VECTOR('',#260699,1.); +#260699 = DIRECTION('',(0.,0.,-1.)); +#260700 = ORIENTED_EDGE('',*,*,#260701,.F.); +#260701 = EDGE_CURVE('',#260662,#260694,#260702,.T.); +#260702 = CIRCLE('',#260703,0.299746720158); +#260703 = AXIS2_PLACEMENT_3D('',#260704,#260705,#260706); +#260704 = CARTESIAN_POINT('',(148.99976842403,-112.0001783925,0.)); +#260705 = DIRECTION('',(0.,0.,-1.)); +#260706 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#260707 = CYLINDRICAL_SURFACE('',#260708,0.299746720158); +#260708 = AXIS2_PLACEMENT_3D('',#260709,#260710,#260711); +#260709 = CARTESIAN_POINT('',(148.99976842403,-112.0001783925,0.)); +#260710 = DIRECTION('',(-0.,-0.,1.)); +#260711 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#260712 = ADVANCED_FACE('',(#260713),#260729,.F.); +#260713 = FACE_BOUND('',#260714,.F.); +#260714 = EDGE_LOOP('',(#260715,#260716,#260722,#260723)); +#260715 = ORIENTED_EDGE('',*,*,#260693,.T.); +#260716 = ORIENTED_EDGE('',*,*,#260717,.T.); +#260717 = EDGE_CURVE('',#260685,#260266,#260718,.T.); +#260718 = LINE('',#260719,#260720); +#260719 = CARTESIAN_POINT('',(149.278284,-111.889376,-3.5E-02)); +#260720 = VECTOR('',#260721,1.); +#260721 = DIRECTION('',(0.707107030841,-0.707106531532,0.)); +#260722 = ORIENTED_EDGE('',*,*,#260263,.F.); +#260723 = ORIENTED_EDGE('',*,*,#260724,.F.); +#260724 = EDGE_CURVE('',#260694,#260264,#260725,.T.); +#260725 = LINE('',#260726,#260727); +#260726 = CARTESIAN_POINT('',(149.278284,-111.889376,0.)); +#260727 = VECTOR('',#260728,1.); +#260728 = DIRECTION('',(0.707107030841,-0.707106531532,0.)); +#260729 = PLANE('',#260730); +#260730 = AXIS2_PLACEMENT_3D('',#260731,#260732,#260733); +#260731 = CARTESIAN_POINT('',(149.278284,-111.889376,0.)); +#260732 = DIRECTION('',(-0.707106531532,-0.707107030841,-0.)); +#260733 = DIRECTION('',(0.707107030841,-0.707106531532,0.)); +#260734 = ADVANCED_FACE('',(#260735),#260762,.F.); +#260735 = FACE_BOUND('',#260736,.F.); +#260736 = EDGE_LOOP('',(#260737,#260747,#260754,#260755)); +#260737 = ORIENTED_EDGE('',*,*,#260738,.T.); +#260738 = EDGE_CURVE('',#260739,#260741,#260743,.T.); +#260739 = VERTEX_POINT('',#260740); +#260740 = CARTESIAN_POINT('',(149.137255,-112.,0.)); +#260741 = VERTEX_POINT('',#260742); +#260742 = CARTESIAN_POINT('',(149.137255,-112.,-3.5E-02)); +#260743 = LINE('',#260744,#260745); +#260744 = CARTESIAN_POINT('',(149.137255,-112.,0.)); +#260745 = VECTOR('',#260746,1.); +#260746 = DIRECTION('',(0.,0.,-1.)); +#260747 = ORIENTED_EDGE('',*,*,#260748,.T.); +#260748 = EDGE_CURVE('',#260741,#260741,#260749,.T.); +#260749 = CIRCLE('',#260750,0.137255); +#260750 = AXIS2_PLACEMENT_3D('',#260751,#260752,#260753); +#260751 = CARTESIAN_POINT('',(149.,-112.,-3.5E-02)); +#260752 = DIRECTION('',(0.,0.,1.)); +#260753 = DIRECTION('',(1.,0.,-0.)); +#260754 = ORIENTED_EDGE('',*,*,#260738,.F.); +#260755 = ORIENTED_EDGE('',*,*,#260756,.F.); +#260756 = EDGE_CURVE('',#260739,#260739,#260757,.T.); +#260757 = CIRCLE('',#260758,0.137255); +#260758 = AXIS2_PLACEMENT_3D('',#260759,#260760,#260761); +#260759 = CARTESIAN_POINT('',(149.,-112.,0.)); +#260760 = DIRECTION('',(0.,0.,1.)); +#260761 = DIRECTION('',(1.,0.,-0.)); +#260762 = CYLINDRICAL_SURFACE('',#260763,0.137255); +#260763 = AXIS2_PLACEMENT_3D('',#260764,#260765,#260766); +#260764 = CARTESIAN_POINT('',(149.,-112.,0.)); +#260765 = DIRECTION('',(0.,0.,1.)); +#260766 = DIRECTION('',(1.,0.,-0.)); +#260767 = ADVANCED_FACE('',(#260768,#260785),#260788,.F.); +#260768 = FACE_BOUND('',#260769,.F.); +#260769 = EDGE_LOOP('',(#260770,#260771,#260772,#260773,#260774,#260775, + #260776,#260777,#260778,#260779,#260780,#260781,#260782,#260783, + #260784)); +#260770 = ORIENTED_EDGE('',*,*,#260290,.T.); +#260771 = ORIENTED_EDGE('',*,*,#260322,.T.); +#260772 = ORIENTED_EDGE('',*,*,#260353,.T.); +#260773 = ORIENTED_EDGE('',*,*,#260385,.T.); +#260774 = ORIENTED_EDGE('',*,*,#260417,.T.); +#260775 = ORIENTED_EDGE('',*,*,#260449,.T.); +#260776 = ORIENTED_EDGE('',*,*,#260481,.T.); +#260777 = ORIENTED_EDGE('',*,*,#260512,.T.); +#260778 = ORIENTED_EDGE('',*,*,#260543,.T.); +#260779 = ORIENTED_EDGE('',*,*,#260574,.T.); +#260780 = ORIENTED_EDGE('',*,*,#260606,.T.); +#260781 = ORIENTED_EDGE('',*,*,#260638,.T.); +#260782 = ORIENTED_EDGE('',*,*,#260669,.T.); +#260783 = ORIENTED_EDGE('',*,*,#260701,.T.); +#260784 = ORIENTED_EDGE('',*,*,#260724,.T.); +#260785 = FACE_BOUND('',#260786,.F.); +#260786 = EDGE_LOOP('',(#260787)); +#260787 = ORIENTED_EDGE('',*,*,#260756,.T.); +#260788 = PLANE('',#260789); +#260789 = AXIS2_PLACEMENT_3D('',#260790,#260791,#260792); +#260790 = CARTESIAN_POINT('',(0.,0.,0.)); +#260791 = DIRECTION('',(-0.,-0.,-1.)); +#260792 = DIRECTION('',(-1.,0.,0.)); +#260793 = ADVANCED_FACE('',(#260794,#260811),#260814,.T.); +#260794 = FACE_BOUND('',#260795,.T.); +#260795 = EDGE_LOOP('',(#260796,#260797,#260798,#260799,#260800,#260801, + #260802,#260803,#260804,#260805,#260806,#260807,#260808,#260809, + #260810)); +#260796 = ORIENTED_EDGE('',*,*,#260273,.T.); +#260797 = ORIENTED_EDGE('',*,*,#260306,.T.); +#260798 = ORIENTED_EDGE('',*,*,#260337,.T.); +#260799 = ORIENTED_EDGE('',*,*,#260368,.T.); +#260800 = ORIENTED_EDGE('',*,*,#260401,.T.); +#260801 = ORIENTED_EDGE('',*,*,#260432,.T.); +#260802 = ORIENTED_EDGE('',*,*,#260465,.T.); +#260803 = ORIENTED_EDGE('',*,*,#260496,.T.); +#260804 = ORIENTED_EDGE('',*,*,#260527,.T.); +#260805 = ORIENTED_EDGE('',*,*,#260558,.T.); +#260806 = ORIENTED_EDGE('',*,*,#260589,.T.); +#260807 = ORIENTED_EDGE('',*,*,#260622,.T.); +#260808 = ORIENTED_EDGE('',*,*,#260653,.T.); +#260809 = ORIENTED_EDGE('',*,*,#260684,.T.); +#260810 = ORIENTED_EDGE('',*,*,#260717,.T.); +#260811 = FACE_BOUND('',#260812,.T.); +#260812 = EDGE_LOOP('',(#260813)); +#260813 = ORIENTED_EDGE('',*,*,#260748,.T.); +#260814 = PLANE('',#260815); +#260815 = AXIS2_PLACEMENT_3D('',#260816,#260817,#260818); +#260816 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#260817 = DIRECTION('',(-0.,-0.,-1.)); +#260818 = DIRECTION('',(-1.,0.,0.)); +#260819 = MANIFOLD_SOLID_BREP('',#260820); +#260820 = CLOSED_SHELL('',(#260821,#260861,#260894,#260925,#260958, + #260989,#261022,#261044,#261077,#261110,#261131)); +#260821 = ADVANCED_FACE('',(#260822),#260856,.F.); +#260822 = FACE_BOUND('',#260823,.F.); +#260823 = EDGE_LOOP('',(#260824,#260834,#260842,#260850)); +#260824 = ORIENTED_EDGE('',*,*,#260825,.T.); +#260825 = EDGE_CURVE('',#260826,#260828,#260830,.T.); +#260826 = VERTEX_POINT('',#260827); +#260827 = CARTESIAN_POINT('',(134.227778,-114.225,0.)); +#260828 = VERTEX_POINT('',#260829); +#260829 = CARTESIAN_POINT('',(134.227778,-114.225,-3.5E-02)); +#260830 = LINE('',#260831,#260832); +#260831 = CARTESIAN_POINT('',(134.227778,-114.225,0.)); +#260832 = VECTOR('',#260833,1.); +#260833 = DIRECTION('',(0.,0.,-1.)); +#260834 = ORIENTED_EDGE('',*,*,#260835,.T.); +#260835 = EDGE_CURVE('',#260828,#260836,#260838,.T.); +#260836 = VERTEX_POINT('',#260837); +#260837 = CARTESIAN_POINT('',(142.885195,-114.222836,-3.5E-02)); +#260838 = LINE('',#260839,#260840); +#260839 = CARTESIAN_POINT('',(134.227778,-114.225,-3.5E-02)); +#260840 = VECTOR('',#260841,1.); +#260841 = DIRECTION('',(0.99999996876,2.499590735193E-04,0.)); +#260842 = ORIENTED_EDGE('',*,*,#260843,.F.); +#260843 = EDGE_CURVE('',#260844,#260836,#260846,.T.); +#260844 = VERTEX_POINT('',#260845); +#260845 = CARTESIAN_POINT('',(142.885195,-114.222836,0.)); +#260846 = LINE('',#260847,#260848); +#260847 = CARTESIAN_POINT('',(142.885195,-114.222836,0.)); +#260848 = VECTOR('',#260849,1.); +#260849 = DIRECTION('',(0.,0.,-1.)); +#260850 = ORIENTED_EDGE('',*,*,#260851,.F.); +#260851 = EDGE_CURVE('',#260826,#260844,#260852,.T.); +#260852 = LINE('',#260853,#260854); +#260853 = CARTESIAN_POINT('',(134.227778,-114.225,0.)); +#260854 = VECTOR('',#260855,1.); +#260855 = DIRECTION('',(0.99999996876,2.499590735193E-04,0.)); +#260856 = PLANE('',#260857); +#260857 = AXIS2_PLACEMENT_3D('',#260858,#260859,#260860); +#260858 = CARTESIAN_POINT('',(134.227778,-114.225,0.)); +#260859 = DIRECTION('',(2.499590735193E-04,-0.99999996876,0.)); +#260860 = DIRECTION('',(0.99999996876,2.499590735193E-04,0.)); +#260861 = ADVANCED_FACE('',(#260862),#260889,.T.); +#260862 = FACE_BOUND('',#260863,.F.); +#260863 = EDGE_LOOP('',(#260864,#260865,#260874,#260882)); +#260864 = ORIENTED_EDGE('',*,*,#260843,.T.); +#260865 = ORIENTED_EDGE('',*,*,#260866,.T.); +#260866 = EDGE_CURVE('',#260836,#260867,#260869,.T.); +#260867 = VERTEX_POINT('',#260868); +#260868 = CARTESIAN_POINT('',(142.881447,-114.775,-3.5E-02)); +#260869 = CIRCLE('',#260870,0.299797021173); +#260870 = AXIS2_PLACEMENT_3D('',#260871,#260872,#260873); +#260871 = CARTESIAN_POINT('',(143.00016637754,-114.4997111275,-3.5E-02) + ); +#260872 = DIRECTION('',(0.,0.,-1.)); +#260873 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#260874 = ORIENTED_EDGE('',*,*,#260875,.F.); +#260875 = EDGE_CURVE('',#260876,#260867,#260878,.T.); +#260876 = VERTEX_POINT('',#260877); +#260877 = CARTESIAN_POINT('',(142.881447,-114.775,0.)); +#260878 = LINE('',#260879,#260880); +#260879 = CARTESIAN_POINT('',(142.881447,-114.775,0.)); +#260880 = VECTOR('',#260881,1.); +#260881 = DIRECTION('',(0.,0.,-1.)); +#260882 = ORIENTED_EDGE('',*,*,#260883,.F.); +#260883 = EDGE_CURVE('',#260844,#260876,#260884,.T.); +#260884 = CIRCLE('',#260885,0.299797021173); +#260885 = AXIS2_PLACEMENT_3D('',#260886,#260887,#260888); +#260886 = CARTESIAN_POINT('',(143.00016637754,-114.4997111275,0.)); +#260887 = DIRECTION('',(0.,0.,-1.)); +#260888 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#260889 = CYLINDRICAL_SURFACE('',#260890,0.299797021173); +#260890 = AXIS2_PLACEMENT_3D('',#260891,#260892,#260893); +#260891 = CARTESIAN_POINT('',(143.00016637754,-114.4997111275,0.)); +#260892 = DIRECTION('',(-0.,-0.,1.)); +#260893 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#260894 = ADVANCED_FACE('',(#260895),#260920,.F.); +#260895 = FACE_BOUND('',#260896,.F.); +#260896 = EDGE_LOOP('',(#260897,#260898,#260906,#260914)); +#260897 = ORIENTED_EDGE('',*,*,#260875,.T.); +#260898 = ORIENTED_EDGE('',*,*,#260899,.T.); +#260899 = EDGE_CURVE('',#260867,#260900,#260902,.T.); +#260900 = VERTEX_POINT('',#260901); +#260901 = CARTESIAN_POINT('',(134.11387,-114.775,-3.5E-02)); +#260902 = LINE('',#260903,#260904); +#260903 = CARTESIAN_POINT('',(142.881447,-114.775,-3.5E-02)); +#260904 = VECTOR('',#260905,1.); +#260905 = DIRECTION('',(-1.,0.,0.)); +#260906 = ORIENTED_EDGE('',*,*,#260907,.F.); +#260907 = EDGE_CURVE('',#260908,#260900,#260910,.T.); +#260908 = VERTEX_POINT('',#260909); +#260909 = CARTESIAN_POINT('',(134.11387,-114.775,0.)); +#260910 = LINE('',#260911,#260912); +#260911 = CARTESIAN_POINT('',(134.11387,-114.775,0.)); +#260912 = VECTOR('',#260913,1.); +#260913 = DIRECTION('',(0.,0.,-1.)); +#260914 = ORIENTED_EDGE('',*,*,#260915,.F.); +#260915 = EDGE_CURVE('',#260876,#260908,#260916,.T.); +#260916 = LINE('',#260917,#260918); +#260917 = CARTESIAN_POINT('',(142.881447,-114.775,0.)); +#260918 = VECTOR('',#260919,1.); +#260919 = DIRECTION('',(-1.,0.,0.)); +#260920 = PLANE('',#260921); +#260921 = AXIS2_PLACEMENT_3D('',#260922,#260923,#260924); +#260922 = CARTESIAN_POINT('',(142.881447,-114.775,0.)); +#260923 = DIRECTION('',(0.,1.,0.)); +#260924 = DIRECTION('',(-1.,0.,0.)); +#260925 = ADVANCED_FACE('',(#260926),#260953,.T.); +#260926 = FACE_BOUND('',#260927,.F.); +#260927 = EDGE_LOOP('',(#260928,#260929,#260938,#260946)); +#260928 = ORIENTED_EDGE('',*,*,#260907,.T.); +#260929 = ORIENTED_EDGE('',*,*,#260930,.T.); +#260930 = EDGE_CURVE('',#260900,#260931,#260933,.T.); +#260931 = VERTEX_POINT('',#260932); +#260932 = CARTESIAN_POINT('',(133.919416,-114.694454,-3.5E-02)); +#260933 = CIRCLE('',#260934,0.27499641508); +#260934 = AXIS2_PLACEMENT_3D('',#260935,#260936,#260937); +#260935 = CARTESIAN_POINT('',(134.11386924472,-114.5000035849,-3.5E-02) + ); +#260936 = DIRECTION('',(0.,0.,-1.)); +#260937 = DIRECTION('',(2.746505166687E-06,-0.999999999996,0.)); +#260938 = ORIENTED_EDGE('',*,*,#260939,.F.); +#260939 = EDGE_CURVE('',#260940,#260931,#260942,.T.); +#260940 = VERTEX_POINT('',#260941); +#260941 = CARTESIAN_POINT('',(133.919416,-114.694454,0.)); +#260942 = LINE('',#260943,#260944); +#260943 = CARTESIAN_POINT('',(133.919416,-114.694454,0.)); +#260944 = VECTOR('',#260945,1.); +#260945 = DIRECTION('',(0.,0.,-1.)); +#260946 = ORIENTED_EDGE('',*,*,#260947,.F.); +#260947 = EDGE_CURVE('',#260908,#260940,#260948,.T.); +#260948 = CIRCLE('',#260949,0.27499641508); +#260949 = AXIS2_PLACEMENT_3D('',#260950,#260951,#260952); +#260950 = CARTESIAN_POINT('',(134.11386924472,-114.5000035849,0.)); +#260951 = DIRECTION('',(0.,0.,-1.)); +#260952 = DIRECTION('',(2.746505166687E-06,-0.999999999996,0.)); +#260953 = CYLINDRICAL_SURFACE('',#260954,0.27499641508); +#260954 = AXIS2_PLACEMENT_3D('',#260955,#260956,#260957); +#260955 = CARTESIAN_POINT('',(134.11386924472,-114.5000035849,0.)); +#260956 = DIRECTION('',(-0.,-0.,1.)); +#260957 = DIRECTION('',(2.746505166687E-06,-0.999999999996,0.)); +#260958 = ADVANCED_FACE('',(#260959),#260984,.F.); +#260959 = FACE_BOUND('',#260960,.F.); +#260960 = EDGE_LOOP('',(#260961,#260962,#260970,#260978)); +#260961 = ORIENTED_EDGE('',*,*,#260939,.T.); +#260962 = ORIENTED_EDGE('',*,*,#260963,.T.); +#260963 = EDGE_CURVE('',#260931,#260964,#260966,.T.); +#260964 = VERTEX_POINT('',#260965); +#260965 = CARTESIAN_POINT('',(133.474065,-114.252164,-3.5E-02)); +#260966 = LINE('',#260967,#260968); +#260967 = CARTESIAN_POINT('',(133.919416,-114.694454,-3.5E-02)); +#260968 = VECTOR('',#260969,1.); +#260969 = DIRECTION('',(-0.709540996143,0.704664157449,0.)); +#260970 = ORIENTED_EDGE('',*,*,#260971,.F.); +#260971 = EDGE_CURVE('',#260972,#260964,#260974,.T.); +#260972 = VERTEX_POINT('',#260973); +#260973 = CARTESIAN_POINT('',(133.474065,-114.252164,0.)); +#260974 = LINE('',#260975,#260976); +#260975 = CARTESIAN_POINT('',(133.474065,-114.252164,0.)); +#260976 = VECTOR('',#260977,1.); +#260977 = DIRECTION('',(0.,0.,-1.)); +#260978 = ORIENTED_EDGE('',*,*,#260979,.F.); +#260979 = EDGE_CURVE('',#260940,#260972,#260980,.T.); +#260980 = LINE('',#260981,#260982); +#260981 = CARTESIAN_POINT('',(133.919416,-114.694454,0.)); +#260982 = VECTOR('',#260983,1.); +#260983 = DIRECTION('',(-0.709540996143,0.704664157449,0.)); +#260984 = PLANE('',#260985); +#260985 = AXIS2_PLACEMENT_3D('',#260986,#260987,#260988); +#260986 = CARTESIAN_POINT('',(133.919416,-114.694454,0.)); +#260987 = DIRECTION('',(0.704664157449,0.709540996143,0.)); +#260988 = DIRECTION('',(-0.709540996143,0.704664157449,0.)); +#260989 = ADVANCED_FACE('',(#260990),#261017,.T.); +#260990 = FACE_BOUND('',#260991,.F.); +#260991 = EDGE_LOOP('',(#260992,#260993,#261002,#261010)); +#260992 = ORIENTED_EDGE('',*,*,#260971,.T.); +#260993 = ORIENTED_EDGE('',*,*,#260994,.T.); +#260994 = EDGE_CURVE('',#260964,#260995,#260997,.T.); +#260995 = VERTEX_POINT('',#260996); +#260996 = CARTESIAN_POINT('',(133.867154,-113.864376,-3.5E-02)); +#260997 = CIRCLE('',#260998,0.299746720158); +#260998 = AXIS2_PLACEMENT_3D('',#260999,#261000,#261001); +#260999 = CARTESIAN_POINT('',(133.58863842403,-113.9751783925,-3.5E-02) + ); +#261000 = DIRECTION('',(0.,0.,-1.)); +#261001 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#261002 = ORIENTED_EDGE('',*,*,#261003,.F.); +#261003 = EDGE_CURVE('',#261004,#260995,#261006,.T.); +#261004 = VERTEX_POINT('',#261005); +#261005 = CARTESIAN_POINT('',(133.867154,-113.864376,0.)); +#261006 = LINE('',#261007,#261008); +#261007 = CARTESIAN_POINT('',(133.867154,-113.864376,0.)); +#261008 = VECTOR('',#261009,1.); +#261009 = DIRECTION('',(0.,0.,-1.)); +#261010 = ORIENTED_EDGE('',*,*,#261011,.F.); +#261011 = EDGE_CURVE('',#260972,#261004,#261012,.T.); +#261012 = CIRCLE('',#261013,0.299746720158); +#261013 = AXIS2_PLACEMENT_3D('',#261014,#261015,#261016); +#261014 = CARTESIAN_POINT('',(133.58863842403,-113.9751783925,0.)); +#261015 = DIRECTION('',(0.,0.,-1.)); +#261016 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#261017 = CYLINDRICAL_SURFACE('',#261018,0.299746720158); +#261018 = AXIS2_PLACEMENT_3D('',#261019,#261020,#261021); +#261019 = CARTESIAN_POINT('',(133.58863842403,-113.9751783925,0.)); +#261020 = DIRECTION('',(-0.,-0.,1.)); +#261021 = DIRECTION('',(-0.382234120763,-0.924065515494,-0.)); +#261022 = ADVANCED_FACE('',(#261023),#261039,.F.); +#261023 = FACE_BOUND('',#261024,.F.); +#261024 = EDGE_LOOP('',(#261025,#261026,#261032,#261033)); +#261025 = ORIENTED_EDGE('',*,*,#261003,.T.); +#261026 = ORIENTED_EDGE('',*,*,#261027,.T.); +#261027 = EDGE_CURVE('',#260995,#260828,#261028,.T.); +#261028 = LINE('',#261029,#261030); +#261029 = CARTESIAN_POINT('',(133.867154,-113.864376,-3.5E-02)); +#261030 = VECTOR('',#261031,1.); +#261031 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#261032 = ORIENTED_EDGE('',*,*,#260825,.F.); +#261033 = ORIENTED_EDGE('',*,*,#261034,.F.); +#261034 = EDGE_CURVE('',#261004,#260826,#261035,.T.); +#261035 = LINE('',#261036,#261037); +#261036 = CARTESIAN_POINT('',(133.867154,-113.864376,0.)); +#261037 = VECTOR('',#261038,1.); +#261038 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#261039 = PLANE('',#261040); +#261040 = AXIS2_PLACEMENT_3D('',#261041,#261042,#261043); +#261041 = CARTESIAN_POINT('',(133.867154,-113.864376,0.)); +#261042 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#261043 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#261044 = ADVANCED_FACE('',(#261045),#261072,.F.); +#261045 = FACE_BOUND('',#261046,.F.); +#261046 = EDGE_LOOP('',(#261047,#261057,#261064,#261065)); +#261047 = ORIENTED_EDGE('',*,*,#261048,.T.); +#261048 = EDGE_CURVE('',#261049,#261051,#261053,.T.); +#261049 = VERTEX_POINT('',#261050); +#261050 = CARTESIAN_POINT('',(143.137255,-114.5,0.)); +#261051 = VERTEX_POINT('',#261052); +#261052 = CARTESIAN_POINT('',(143.137255,-114.5,-3.5E-02)); +#261053 = LINE('',#261054,#261055); +#261054 = CARTESIAN_POINT('',(143.137255,-114.5,0.)); +#261055 = VECTOR('',#261056,1.); +#261056 = DIRECTION('',(0.,0.,-1.)); +#261057 = ORIENTED_EDGE('',*,*,#261058,.T.); +#261058 = EDGE_CURVE('',#261051,#261051,#261059,.T.); +#261059 = CIRCLE('',#261060,0.137255); +#261060 = AXIS2_PLACEMENT_3D('',#261061,#261062,#261063); +#261061 = CARTESIAN_POINT('',(143.,-114.5,-3.5E-02)); +#261062 = DIRECTION('',(0.,0.,1.)); +#261063 = DIRECTION('',(1.,0.,-0.)); +#261064 = ORIENTED_EDGE('',*,*,#261048,.F.); +#261065 = ORIENTED_EDGE('',*,*,#261066,.F.); +#261066 = EDGE_CURVE('',#261049,#261049,#261067,.T.); +#261067 = CIRCLE('',#261068,0.137255); +#261068 = AXIS2_PLACEMENT_3D('',#261069,#261070,#261071); +#261069 = CARTESIAN_POINT('',(143.,-114.5,0.)); +#261070 = DIRECTION('',(0.,0.,1.)); +#261071 = DIRECTION('',(1.,0.,-0.)); +#261072 = CYLINDRICAL_SURFACE('',#261073,0.137255); +#261073 = AXIS2_PLACEMENT_3D('',#261074,#261075,#261076); +#261074 = CARTESIAN_POINT('',(143.,-114.5,0.)); +#261075 = DIRECTION('',(0.,0.,1.)); +#261076 = DIRECTION('',(1.,0.,-0.)); +#261077 = ADVANCED_FACE('',(#261078),#261105,.F.); +#261078 = FACE_BOUND('',#261079,.F.); +#261079 = EDGE_LOOP('',(#261080,#261090,#261097,#261098)); +#261080 = ORIENTED_EDGE('',*,*,#261081,.T.); +#261081 = EDGE_CURVE('',#261082,#261084,#261086,.T.); +#261082 = VERTEX_POINT('',#261083); +#261083 = CARTESIAN_POINT('',(133.726125,-113.975,0.)); +#261084 = VERTEX_POINT('',#261085); +#261085 = CARTESIAN_POINT('',(133.726125,-113.975,-3.5E-02)); +#261086 = LINE('',#261087,#261088); +#261087 = CARTESIAN_POINT('',(133.726125,-113.975,0.)); +#261088 = VECTOR('',#261089,1.); +#261089 = DIRECTION('',(0.,0.,-1.)); +#261090 = ORIENTED_EDGE('',*,*,#261091,.T.); +#261091 = EDGE_CURVE('',#261084,#261084,#261092,.T.); +#261092 = CIRCLE('',#261093,0.137255); +#261093 = AXIS2_PLACEMENT_3D('',#261094,#261095,#261096); +#261094 = CARTESIAN_POINT('',(133.58887,-113.975,-3.5E-02)); +#261095 = DIRECTION('',(0.,0.,1.)); +#261096 = DIRECTION('',(1.,0.,-0.)); +#261097 = ORIENTED_EDGE('',*,*,#261081,.F.); +#261098 = ORIENTED_EDGE('',*,*,#261099,.F.); +#261099 = EDGE_CURVE('',#261082,#261082,#261100,.T.); +#261100 = CIRCLE('',#261101,0.137255); +#261101 = AXIS2_PLACEMENT_3D('',#261102,#261103,#261104); +#261102 = CARTESIAN_POINT('',(133.58887,-113.975,0.)); +#261103 = DIRECTION('',(0.,0.,1.)); +#261104 = DIRECTION('',(1.,0.,-0.)); +#261105 = CYLINDRICAL_SURFACE('',#261106,0.137255); +#261106 = AXIS2_PLACEMENT_3D('',#261107,#261108,#261109); +#261107 = CARTESIAN_POINT('',(133.58887,-113.975,0.)); +#261108 = DIRECTION('',(0.,0.,1.)); +#261109 = DIRECTION('',(1.,0.,-0.)); +#261110 = ADVANCED_FACE('',(#261111,#261120,#261123),#261126,.F.); +#261111 = FACE_BOUND('',#261112,.F.); +#261112 = EDGE_LOOP('',(#261113,#261114,#261115,#261116,#261117,#261118, + #261119)); +#261113 = ORIENTED_EDGE('',*,*,#260851,.T.); +#261114 = ORIENTED_EDGE('',*,*,#260883,.T.); +#261115 = ORIENTED_EDGE('',*,*,#260915,.T.); +#261116 = ORIENTED_EDGE('',*,*,#260947,.T.); +#261117 = ORIENTED_EDGE('',*,*,#260979,.T.); +#261118 = ORIENTED_EDGE('',*,*,#261011,.T.); +#261119 = ORIENTED_EDGE('',*,*,#261034,.T.); +#261120 = FACE_BOUND('',#261121,.F.); +#261121 = EDGE_LOOP('',(#261122)); +#261122 = ORIENTED_EDGE('',*,*,#261066,.T.); +#261123 = FACE_BOUND('',#261124,.F.); +#261124 = EDGE_LOOP('',(#261125)); +#261125 = ORIENTED_EDGE('',*,*,#261099,.T.); +#261126 = PLANE('',#261127); +#261127 = AXIS2_PLACEMENT_3D('',#261128,#261129,#261130); +#261128 = CARTESIAN_POINT('',(0.,0.,0.)); +#261129 = DIRECTION('',(-0.,-0.,-1.)); +#261130 = DIRECTION('',(-1.,0.,0.)); +#261131 = ADVANCED_FACE('',(#261132,#261141,#261144),#261147,.T.); +#261132 = FACE_BOUND('',#261133,.T.); +#261133 = EDGE_LOOP('',(#261134,#261135,#261136,#261137,#261138,#261139, + #261140)); +#261134 = ORIENTED_EDGE('',*,*,#260835,.T.); +#261135 = ORIENTED_EDGE('',*,*,#260866,.T.); +#261136 = ORIENTED_EDGE('',*,*,#260899,.T.); +#261137 = ORIENTED_EDGE('',*,*,#260930,.T.); +#261138 = ORIENTED_EDGE('',*,*,#260963,.T.); +#261139 = ORIENTED_EDGE('',*,*,#260994,.T.); +#261140 = ORIENTED_EDGE('',*,*,#261027,.T.); +#261141 = FACE_BOUND('',#261142,.T.); +#261142 = EDGE_LOOP('',(#261143)); +#261143 = ORIENTED_EDGE('',*,*,#261058,.T.); +#261144 = FACE_BOUND('',#261145,.T.); +#261145 = EDGE_LOOP('',(#261146)); +#261146 = ORIENTED_EDGE('',*,*,#261091,.T.); +#261147 = PLANE('',#261148); +#261148 = AXIS2_PLACEMENT_3D('',#261149,#261150,#261151); +#261149 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#261150 = DIRECTION('',(-0.,-0.,-1.)); +#261151 = DIRECTION('',(-1.,0.,0.)); +#261152 = MANIFOLD_SOLID_BREP('',#261153); +#261153 = CLOSED_SHELL('',(#261154,#261194,#261227,#261258,#261291, + #261322,#261355,#261377,#261410,#261428)); +#261154 = ADVANCED_FACE('',(#261155),#261189,.F.); +#261155 = FACE_BOUND('',#261156,.F.); +#261156 = EDGE_LOOP('',(#261157,#261167,#261175,#261183)); +#261157 = ORIENTED_EDGE('',*,*,#261158,.T.); +#261158 = EDGE_CURVE('',#261159,#261161,#261163,.T.); +#261159 = VERTEX_POINT('',#261160); +#261160 = CARTESIAN_POINT('',(133.538909,-110.725,0.)); +#261161 = VERTEX_POINT('',#261162); +#261162 = CARTESIAN_POINT('',(133.538909,-110.725,-3.5E-02)); +#261163 = LINE('',#261164,#261165); +#261164 = CARTESIAN_POINT('',(133.538909,-110.725,0.)); +#261165 = VECTOR('',#261166,1.); +#261166 = DIRECTION('',(0.,0.,-1.)); +#261167 = ORIENTED_EDGE('',*,*,#261168,.T.); +#261168 = EDGE_CURVE('',#261161,#261169,#261171,.T.); +#261169 = VERTEX_POINT('',#261170); +#261170 = CARTESIAN_POINT('',(133.735195,-110.722836,-3.5E-02)); +#261171 = LINE('',#261172,#261173); +#261172 = CARTESIAN_POINT('',(133.538909,-110.725,-3.5E-02)); +#261173 = VECTOR('',#261174,1.); +#261174 = DIRECTION('',(0.999939233212,1.102405928423E-02,0.)); +#261175 = ORIENTED_EDGE('',*,*,#261176,.F.); +#261176 = EDGE_CURVE('',#261177,#261169,#261179,.T.); +#261177 = VERTEX_POINT('',#261178); +#261178 = CARTESIAN_POINT('',(133.735195,-110.722836,0.)); +#261179 = LINE('',#261180,#261181); +#261180 = CARTESIAN_POINT('',(133.735195,-110.722836,0.)); +#261181 = VECTOR('',#261182,1.); +#261182 = DIRECTION('',(0.,0.,-1.)); +#261183 = ORIENTED_EDGE('',*,*,#261184,.F.); +#261184 = EDGE_CURVE('',#261159,#261177,#261185,.T.); +#261185 = LINE('',#261186,#261187); +#261186 = CARTESIAN_POINT('',(133.538909,-110.725,0.)); +#261187 = VECTOR('',#261188,1.); +#261188 = DIRECTION('',(0.999939233212,1.102405928423E-02,0.)); +#261189 = PLANE('',#261190); +#261190 = AXIS2_PLACEMENT_3D('',#261191,#261192,#261193); +#261191 = CARTESIAN_POINT('',(133.538909,-110.725,0.)); +#261192 = DIRECTION('',(1.102405928423E-02,-0.999939233212,0.)); +#261193 = DIRECTION('',(0.999939233212,1.102405928423E-02,0.)); +#261194 = ADVANCED_FACE('',(#261195),#261222,.T.); +#261195 = FACE_BOUND('',#261196,.F.); +#261196 = EDGE_LOOP('',(#261197,#261198,#261207,#261215)); +#261197 = ORIENTED_EDGE('',*,*,#261176,.T.); +#261198 = ORIENTED_EDGE('',*,*,#261199,.T.); +#261199 = EDGE_CURVE('',#261169,#261200,#261202,.T.); +#261200 = VERTEX_POINT('',#261201); +#261201 = CARTESIAN_POINT('',(133.731447,-111.275,-3.5E-02)); +#261202 = CIRCLE('',#261203,0.299797021173); +#261203 = AXIS2_PLACEMENT_3D('',#261204,#261205,#261206); +#261204 = CARTESIAN_POINT('',(133.85016637754,-110.9997111275,-3.5E-02) + ); +#261205 = DIRECTION('',(0.,0.,-1.)); +#261206 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#261207 = ORIENTED_EDGE('',*,*,#261208,.F.); +#261208 = EDGE_CURVE('',#261209,#261200,#261211,.T.); +#261209 = VERTEX_POINT('',#261210); +#261210 = CARTESIAN_POINT('',(133.731447,-111.275,0.)); +#261211 = LINE('',#261212,#261213); +#261212 = CARTESIAN_POINT('',(133.731447,-111.275,0.)); +#261213 = VECTOR('',#261214,1.); +#261214 = DIRECTION('',(0.,0.,-1.)); +#261215 = ORIENTED_EDGE('',*,*,#261216,.F.); +#261216 = EDGE_CURVE('',#261177,#261209,#261217,.T.); +#261217 = CIRCLE('',#261218,0.299797021173); +#261218 = AXIS2_PLACEMENT_3D('',#261219,#261220,#261221); +#261219 = CARTESIAN_POINT('',(133.85016637754,-110.9997111275,0.)); +#261220 = DIRECTION('',(0.,0.,-1.)); +#261221 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#261222 = CYLINDRICAL_SURFACE('',#261223,0.299797021173); +#261223 = AXIS2_PLACEMENT_3D('',#261224,#261225,#261226); +#261224 = CARTESIAN_POINT('',(133.85016637754,-110.9997111275,0.)); +#261225 = DIRECTION('',(-0.,-0.,1.)); +#261226 = DIRECTION('',(-0.383497397977,0.923541956678,-0.)); +#261227 = ADVANCED_FACE('',(#261228),#261253,.F.); +#261228 = FACE_BOUND('',#261229,.F.); +#261229 = EDGE_LOOP('',(#261230,#261231,#261239,#261247)); +#261230 = ORIENTED_EDGE('',*,*,#261208,.T.); +#261231 = ORIENTED_EDGE('',*,*,#261232,.T.); +#261232 = EDGE_CURVE('',#261200,#261233,#261235,.T.); +#261233 = VERTEX_POINT('',#261234); +#261234 = CARTESIAN_POINT('',(133.425,-111.275,-3.5E-02)); +#261235 = LINE('',#261236,#261237); +#261236 = CARTESIAN_POINT('',(133.731447,-111.275,-3.5E-02)); +#261237 = VECTOR('',#261238,1.); +#261238 = DIRECTION('',(-1.,0.,0.)); +#261239 = ORIENTED_EDGE('',*,*,#261240,.F.); +#261240 = EDGE_CURVE('',#261241,#261233,#261243,.T.); +#261241 = VERTEX_POINT('',#261242); +#261242 = CARTESIAN_POINT('',(133.425,-111.275,0.)); +#261243 = LINE('',#261244,#261245); +#261244 = CARTESIAN_POINT('',(133.425,-111.275,0.)); +#261245 = VECTOR('',#261246,1.); +#261246 = DIRECTION('',(0.,0.,-1.)); +#261247 = ORIENTED_EDGE('',*,*,#261248,.F.); +#261248 = EDGE_CURVE('',#261209,#261241,#261249,.T.); +#261249 = LINE('',#261250,#261251); +#261250 = CARTESIAN_POINT('',(133.731447,-111.275,0.)); +#261251 = VECTOR('',#261252,1.); +#261252 = DIRECTION('',(-1.,0.,0.)); +#261253 = PLANE('',#261254); +#261254 = AXIS2_PLACEMENT_3D('',#261255,#261256,#261257); +#261255 = CARTESIAN_POINT('',(133.731447,-111.275,0.)); +#261256 = DIRECTION('',(0.,1.,0.)); +#261257 = DIRECTION('',(-1.,0.,0.)); +#261258 = ADVANCED_FACE('',(#261259),#261286,.T.); +#261259 = FACE_BOUND('',#261260,.F.); +#261260 = EDGE_LOOP('',(#261261,#261262,#261271,#261279)); +#261261 = ORIENTED_EDGE('',*,*,#261240,.T.); +#261262 = ORIENTED_EDGE('',*,*,#261263,.T.); +#261263 = EDGE_CURVE('',#261233,#261264,#261266,.T.); +#261264 = VERTEX_POINT('',#261265); +#261265 = CARTESIAN_POINT('',(133.230546,-111.194455,-3.5E-02)); +#261266 = CIRCLE('',#261267,0.274999582384); +#261267 = AXIS2_PLACEMENT_3D('',#261268,#261269,#261270); +#261268 = CARTESIAN_POINT('',(133.42499955666,-111.0000004176,-3.5E-02) + ); +#261269 = DIRECTION('',(0.,0.,-1.)); +#261270 = DIRECTION('',(1.612113536016E-06,-0.999999999999,0.)); +#261271 = ORIENTED_EDGE('',*,*,#261272,.F.); +#261272 = EDGE_CURVE('',#261273,#261264,#261275,.T.); +#261273 = VERTEX_POINT('',#261274); +#261274 = CARTESIAN_POINT('',(133.230546,-111.194455,0.)); +#261275 = LINE('',#261276,#261277); +#261276 = CARTESIAN_POINT('',(133.230546,-111.194455,0.)); +#261277 = VECTOR('',#261278,1.); +#261278 = DIRECTION('',(0.,0.,-1.)); +#261279 = ORIENTED_EDGE('',*,*,#261280,.F.); +#261280 = EDGE_CURVE('',#261241,#261273,#261281,.T.); +#261281 = CIRCLE('',#261282,0.274999582384); +#261282 = AXIS2_PLACEMENT_3D('',#261283,#261284,#261285); +#261283 = CARTESIAN_POINT('',(133.42499955666,-111.0000004176,0.)); +#261284 = DIRECTION('',(0.,0.,-1.)); +#261285 = DIRECTION('',(1.612113536016E-06,-0.999999999999,0.)); +#261286 = CYLINDRICAL_SURFACE('',#261287,0.274999582384); +#261287 = AXIS2_PLACEMENT_3D('',#261288,#261289,#261290); +#261288 = CARTESIAN_POINT('',(133.42499955666,-111.0000004176,0.)); +#261289 = DIRECTION('',(-0.,-0.,1.)); +#261290 = DIRECTION('',(1.612113536016E-06,-0.999999999999,0.)); +#261291 = ADVANCED_FACE('',(#261292),#261317,.F.); +#261292 = FACE_BOUND('',#261293,.F.); +#261293 = EDGE_LOOP('',(#261294,#261295,#261303,#261311)); +#261294 = ORIENTED_EDGE('',*,*,#261272,.T.); +#261295 = ORIENTED_EDGE('',*,*,#261296,.T.); +#261296 = EDGE_CURVE('',#261264,#261297,#261299,.T.); +#261297 = VERTEX_POINT('',#261298); +#261298 = CARTESIAN_POINT('',(132.230546,-110.194454,-3.5E-02)); +#261299 = LINE('',#261300,#261301); +#261300 = CARTESIAN_POINT('',(133.230546,-111.194455,-3.5E-02)); +#261301 = VECTOR('',#261302,1.); +#261302 = DIRECTION('',(-0.707106427633,0.70710713474,0.)); +#261303 = ORIENTED_EDGE('',*,*,#261304,.F.); +#261304 = EDGE_CURVE('',#261305,#261297,#261307,.T.); +#261305 = VERTEX_POINT('',#261306); +#261306 = CARTESIAN_POINT('',(132.230546,-110.194454,0.)); +#261307 = LINE('',#261308,#261309); +#261308 = CARTESIAN_POINT('',(132.230546,-110.194454,0.)); +#261309 = VECTOR('',#261310,1.); +#261310 = DIRECTION('',(0.,0.,-1.)); +#261311 = ORIENTED_EDGE('',*,*,#261312,.F.); +#261312 = EDGE_CURVE('',#261273,#261305,#261313,.T.); +#261313 = LINE('',#261314,#261315); +#261314 = CARTESIAN_POINT('',(133.230546,-111.194455,0.)); +#261315 = VECTOR('',#261316,1.); +#261316 = DIRECTION('',(-0.707106427633,0.70710713474,0.)); +#261317 = PLANE('',#261318); +#261318 = AXIS2_PLACEMENT_3D('',#261319,#261320,#261321); +#261319 = CARTESIAN_POINT('',(133.230546,-111.194455,0.)); +#261320 = DIRECTION('',(0.70710713474,0.707106427633,0.)); +#261321 = DIRECTION('',(-0.707106427633,0.70710713474,0.)); +#261322 = ADVANCED_FACE('',(#261323),#261350,.T.); +#261323 = FACE_BOUND('',#261324,.F.); +#261324 = EDGE_LOOP('',(#261325,#261326,#261335,#261343)); +#261325 = ORIENTED_EDGE('',*,*,#261304,.T.); +#261326 = ORIENTED_EDGE('',*,*,#261327,.T.); +#261327 = EDGE_CURVE('',#261297,#261328,#261330,.T.); +#261328 = VERTEX_POINT('',#261329); +#261329 = CARTESIAN_POINT('',(132.619454,-109.805546,-3.5E-02)); +#261330 = CIRCLE('',#261331,0.27499948406); +#261331 = AXIS2_PLACEMENT_3D('',#261332,#261333,#261334); +#261332 = CARTESIAN_POINT('',(132.42499924346,-109.9999992434,-3.5E-02) + ); +#261333 = DIRECTION('',(0.,0.,-1.)); +#261334 = DIRECTION('',(-0.707104030131,-0.707109532231,-0.)); +#261335 = ORIENTED_EDGE('',*,*,#261336,.F.); +#261336 = EDGE_CURVE('',#261337,#261328,#261339,.T.); +#261337 = VERTEX_POINT('',#261338); +#261338 = CARTESIAN_POINT('',(132.619454,-109.805546,0.)); +#261339 = LINE('',#261340,#261341); +#261340 = CARTESIAN_POINT('',(132.619454,-109.805546,0.)); +#261341 = VECTOR('',#261342,1.); +#261342 = DIRECTION('',(0.,0.,-1.)); +#261343 = ORIENTED_EDGE('',*,*,#261344,.F.); +#261344 = EDGE_CURVE('',#261305,#261337,#261345,.T.); +#261345 = CIRCLE('',#261346,0.27499948406); +#261346 = AXIS2_PLACEMENT_3D('',#261347,#261348,#261349); +#261347 = CARTESIAN_POINT('',(132.42499924346,-109.9999992434,0.)); +#261348 = DIRECTION('',(0.,0.,-1.)); +#261349 = DIRECTION('',(-0.707104030131,-0.707109532231,-0.)); +#261350 = CYLINDRICAL_SURFACE('',#261351,0.27499948406); +#261351 = AXIS2_PLACEMENT_3D('',#261352,#261353,#261354); +#261352 = CARTESIAN_POINT('',(132.42499924346,-109.9999992434,0.)); +#261353 = DIRECTION('',(-0.,-0.,1.)); +#261354 = DIRECTION('',(-0.707104030131,-0.707109532231,-0.)); +#261355 = ADVANCED_FACE('',(#261356),#261372,.F.); +#261356 = FACE_BOUND('',#261357,.F.); +#261357 = EDGE_LOOP('',(#261358,#261359,#261365,#261366)); +#261358 = ORIENTED_EDGE('',*,*,#261336,.T.); +#261359 = ORIENTED_EDGE('',*,*,#261360,.T.); +#261360 = EDGE_CURVE('',#261328,#261161,#261361,.T.); +#261361 = LINE('',#261362,#261363); +#261362 = CARTESIAN_POINT('',(132.619454,-109.805546,-3.5E-02)); +#261363 = VECTOR('',#261364,1.); +#261364 = DIRECTION('',(0.707107165712,-0.707106396661,0.)); +#261365 = ORIENTED_EDGE('',*,*,#261158,.F.); +#261366 = ORIENTED_EDGE('',*,*,#261367,.F.); +#261367 = EDGE_CURVE('',#261337,#261159,#261368,.T.); +#261368 = LINE('',#261369,#261370); +#261369 = CARTESIAN_POINT('',(132.619454,-109.805546,0.)); +#261370 = VECTOR('',#261371,1.); +#261371 = DIRECTION('',(0.707107165712,-0.707106396661,0.)); +#261372 = PLANE('',#261373); +#261373 = AXIS2_PLACEMENT_3D('',#261374,#261375,#261376); +#261374 = CARTESIAN_POINT('',(132.619454,-109.805546,0.)); +#261375 = DIRECTION('',(-0.707106396661,-0.707107165712,-0.)); +#261376 = DIRECTION('',(0.707107165712,-0.707106396661,0.)); +#261377 = ADVANCED_FACE('',(#261378),#261405,.F.); +#261378 = FACE_BOUND('',#261379,.F.); +#261379 = EDGE_LOOP('',(#261380,#261390,#261397,#261398)); +#261380 = ORIENTED_EDGE('',*,*,#261381,.T.); +#261381 = EDGE_CURVE('',#261382,#261384,#261386,.T.); +#261382 = VERTEX_POINT('',#261383); +#261383 = CARTESIAN_POINT('',(133.987255,-111.,0.)); +#261384 = VERTEX_POINT('',#261385); +#261385 = CARTESIAN_POINT('',(133.987255,-111.,-3.5E-02)); +#261386 = LINE('',#261387,#261388); +#261387 = CARTESIAN_POINT('',(133.987255,-111.,0.)); +#261388 = VECTOR('',#261389,1.); +#261389 = DIRECTION('',(0.,0.,-1.)); +#261390 = ORIENTED_EDGE('',*,*,#261391,.T.); +#261391 = EDGE_CURVE('',#261384,#261384,#261392,.T.); +#261392 = CIRCLE('',#261393,0.137255); +#261393 = AXIS2_PLACEMENT_3D('',#261394,#261395,#261396); +#261394 = CARTESIAN_POINT('',(133.85,-111.,-3.5E-02)); +#261395 = DIRECTION('',(0.,0.,1.)); +#261396 = DIRECTION('',(1.,0.,-0.)); +#261397 = ORIENTED_EDGE('',*,*,#261381,.F.); +#261398 = ORIENTED_EDGE('',*,*,#261399,.F.); +#261399 = EDGE_CURVE('',#261382,#261382,#261400,.T.); +#261400 = CIRCLE('',#261401,0.137255); +#261401 = AXIS2_PLACEMENT_3D('',#261402,#261403,#261404); +#261402 = CARTESIAN_POINT('',(133.85,-111.,0.)); +#261403 = DIRECTION('',(0.,0.,1.)); +#261404 = DIRECTION('',(1.,0.,-0.)); +#261405 = CYLINDRICAL_SURFACE('',#261406,0.137255); +#261406 = AXIS2_PLACEMENT_3D('',#261407,#261408,#261409); +#261407 = CARTESIAN_POINT('',(133.85,-111.,0.)); +#261408 = DIRECTION('',(0.,0.,1.)); +#261409 = DIRECTION('',(1.,0.,-0.)); +#261410 = ADVANCED_FACE('',(#261411,#261420),#261423,.F.); +#261411 = FACE_BOUND('',#261412,.F.); +#261412 = EDGE_LOOP('',(#261413,#261414,#261415,#261416,#261417,#261418, + #261419)); +#261413 = ORIENTED_EDGE('',*,*,#261184,.T.); +#261414 = ORIENTED_EDGE('',*,*,#261216,.T.); +#261415 = ORIENTED_EDGE('',*,*,#261248,.T.); +#261416 = ORIENTED_EDGE('',*,*,#261280,.T.); +#261417 = ORIENTED_EDGE('',*,*,#261312,.T.); +#261418 = ORIENTED_EDGE('',*,*,#261344,.T.); +#261419 = ORIENTED_EDGE('',*,*,#261367,.T.); +#261420 = FACE_BOUND('',#261421,.F.); +#261421 = EDGE_LOOP('',(#261422)); +#261422 = ORIENTED_EDGE('',*,*,#261399,.T.); +#261423 = PLANE('',#261424); +#261424 = AXIS2_PLACEMENT_3D('',#261425,#261426,#261427); +#261425 = CARTESIAN_POINT('',(0.,0.,0.)); +#261426 = DIRECTION('',(-0.,-0.,-1.)); +#261427 = DIRECTION('',(-1.,0.,0.)); +#261428 = ADVANCED_FACE('',(#261429,#261438),#261441,.T.); +#261429 = FACE_BOUND('',#261430,.T.); +#261430 = EDGE_LOOP('',(#261431,#261432,#261433,#261434,#261435,#261436, + #261437)); +#261431 = ORIENTED_EDGE('',*,*,#261168,.T.); +#261432 = ORIENTED_EDGE('',*,*,#261199,.T.); +#261433 = ORIENTED_EDGE('',*,*,#261232,.T.); +#261434 = ORIENTED_EDGE('',*,*,#261263,.T.); +#261435 = ORIENTED_EDGE('',*,*,#261296,.T.); +#261436 = ORIENTED_EDGE('',*,*,#261327,.T.); +#261437 = ORIENTED_EDGE('',*,*,#261360,.T.); +#261438 = FACE_BOUND('',#261439,.T.); +#261439 = EDGE_LOOP('',(#261440)); +#261440 = ORIENTED_EDGE('',*,*,#261391,.T.); +#261441 = PLANE('',#261442); +#261442 = AXIS2_PLACEMENT_3D('',#261443,#261444,#261445); +#261443 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#261444 = DIRECTION('',(-0.,-0.,-1.)); +#261445 = DIRECTION('',(-1.,0.,0.)); +#261446 = MANIFOLD_SOLID_BREP('',#261447); +#261447 = CLOSED_SHELL('',(#261448,#261488,#261519,#261552,#261583, + #261614,#261645,#261676,#261707,#261738,#261769,#261800,#261831, + #261862,#261893,#261924,#261955,#261986,#262017,#262048,#262081, + #262112,#262143,#262174,#262205,#262236,#262267,#262298,#262329, + #262360,#262391,#262422,#262453,#262484,#262506,#262548)); +#261448 = ADVANCED_FACE('',(#261449),#261483,.F.); +#261449 = FACE_BOUND('',#261450,.F.); +#261450 = EDGE_LOOP('',(#261451,#261461,#261469,#261477)); +#261451 = ORIENTED_EDGE('',*,*,#261452,.T.); +#261452 = EDGE_CURVE('',#261453,#261455,#261457,.T.); +#261453 = VERTEX_POINT('',#261454); +#261454 = CARTESIAN_POINT('',(131.383513,-118.916853,0.)); +#261455 = VERTEX_POINT('',#261456); +#261456 = CARTESIAN_POINT('',(131.383513,-118.916853,-3.5E-02)); +#261457 = LINE('',#261458,#261459); +#261458 = CARTESIAN_POINT('',(131.383513,-118.916853,0.)); +#261459 = VECTOR('',#261460,1.); +#261460 = DIRECTION('',(0.,0.,-1.)); +#261461 = ORIENTED_EDGE('',*,*,#261462,.T.); +#261462 = EDGE_CURVE('',#261455,#261463,#261465,.T.); +#261463 = VERTEX_POINT('',#261464); +#261464 = CARTESIAN_POINT('',(131.419562,-118.901921,-3.5E-02)); +#261465 = LINE('',#261466,#261467); +#261466 = CARTESIAN_POINT('',(131.383513,-118.916853,-3.5E-02)); +#261467 = VECTOR('',#261468,1.); +#261468 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#261469 = ORIENTED_EDGE('',*,*,#261470,.F.); +#261470 = EDGE_CURVE('',#261471,#261463,#261473,.T.); +#261471 = VERTEX_POINT('',#261472); +#261472 = CARTESIAN_POINT('',(131.419562,-118.901921,0.)); +#261473 = LINE('',#261474,#261475); +#261474 = CARTESIAN_POINT('',(131.419562,-118.901921,0.)); +#261475 = VECTOR('',#261476,1.); +#261476 = DIRECTION('',(0.,0.,-1.)); +#261477 = ORIENTED_EDGE('',*,*,#261478,.F.); +#261478 = EDGE_CURVE('',#261453,#261471,#261479,.T.); +#261479 = LINE('',#261480,#261481); +#261480 = CARTESIAN_POINT('',(131.383513,-118.916853,0.)); +#261481 = VECTOR('',#261482,1.); +#261482 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#261483 = PLANE('',#261484); +#261484 = AXIS2_PLACEMENT_3D('',#261485,#261486,#261487); +#261485 = CARTESIAN_POINT('',(131.383513,-118.916853,0.)); +#261486 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#261487 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#261488 = ADVANCED_FACE('',(#261489),#261514,.F.); +#261489 = FACE_BOUND('',#261490,.F.); +#261490 = EDGE_LOOP('',(#261491,#261492,#261500,#261508)); +#261491 = ORIENTED_EDGE('',*,*,#261470,.T.); +#261492 = ORIENTED_EDGE('',*,*,#261493,.T.); +#261493 = EDGE_CURVE('',#261463,#261494,#261496,.T.); +#261494 = VERTEX_POINT('',#261495); +#261495 = CARTESIAN_POINT('',(131.969509,-118.901921,-3.5E-02)); +#261496 = LINE('',#261497,#261498); +#261497 = CARTESIAN_POINT('',(131.419562,-118.901921,-3.5E-02)); +#261498 = VECTOR('',#261499,1.); +#261499 = DIRECTION('',(1.,0.,0.)); +#261500 = ORIENTED_EDGE('',*,*,#261501,.F.); +#261501 = EDGE_CURVE('',#261502,#261494,#261504,.T.); +#261502 = VERTEX_POINT('',#261503); +#261503 = CARTESIAN_POINT('',(131.969509,-118.901921,0.)); +#261504 = LINE('',#261505,#261506); +#261505 = CARTESIAN_POINT('',(131.969509,-118.901921,0.)); +#261506 = VECTOR('',#261507,1.); +#261507 = DIRECTION('',(0.,0.,-1.)); +#261508 = ORIENTED_EDGE('',*,*,#261509,.F.); +#261509 = EDGE_CURVE('',#261471,#261502,#261510,.T.); +#261510 = LINE('',#261511,#261512); +#261511 = CARTESIAN_POINT('',(131.419562,-118.901921,0.)); +#261512 = VECTOR('',#261513,1.); +#261513 = DIRECTION('',(1.,0.,0.)); +#261514 = PLANE('',#261515); +#261515 = AXIS2_PLACEMENT_3D('',#261516,#261517,#261518); +#261516 = CARTESIAN_POINT('',(131.419562,-118.901921,0.)); +#261517 = DIRECTION('',(0.,-1.,0.)); +#261518 = DIRECTION('',(1.,0.,0.)); +#261519 = ADVANCED_FACE('',(#261520),#261547,.T.); +#261520 = FACE_BOUND('',#261521,.F.); +#261521 = EDGE_LOOP('',(#261522,#261523,#261532,#261540)); +#261522 = ORIENTED_EDGE('',*,*,#261501,.T.); +#261523 = ORIENTED_EDGE('',*,*,#261524,.T.); +#261524 = EDGE_CURVE('',#261494,#261525,#261527,.T.); +#261525 = VERTEX_POINT('',#261526); +#261526 = CARTESIAN_POINT('',(131.969509,-119.098079,-3.5E-02)); +#261527 = CIRCLE('',#261528,0.100000456609); +#261528 = AXIS2_PLACEMENT_3D('',#261529,#261530,#261531); +#261529 = CARTESIAN_POINT('',(131.95,-119.,-3.5E-02)); +#261530 = DIRECTION('',(0.,0.,-1.)); +#261531 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#261532 = ORIENTED_EDGE('',*,*,#261533,.F.); +#261533 = EDGE_CURVE('',#261534,#261525,#261536,.T.); +#261534 = VERTEX_POINT('',#261535); +#261535 = CARTESIAN_POINT('',(131.969509,-119.098079,0.)); +#261536 = LINE('',#261537,#261538); +#261537 = CARTESIAN_POINT('',(131.969509,-119.098079,0.)); +#261538 = VECTOR('',#261539,1.); +#261539 = DIRECTION('',(0.,0.,-1.)); +#261540 = ORIENTED_EDGE('',*,*,#261541,.F.); +#261541 = EDGE_CURVE('',#261502,#261534,#261542,.T.); +#261542 = CIRCLE('',#261543,0.100000456609); +#261543 = AXIS2_PLACEMENT_3D('',#261544,#261545,#261546); +#261544 = CARTESIAN_POINT('',(131.95,-119.,0.)); +#261545 = DIRECTION('',(0.,0.,-1.)); +#261546 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#261547 = CYLINDRICAL_SURFACE('',#261548,0.100000456609); +#261548 = AXIS2_PLACEMENT_3D('',#261549,#261550,#261551); +#261549 = CARTESIAN_POINT('',(131.95,-119.,0.)); +#261550 = DIRECTION('',(-0.,-0.,1.)); +#261551 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#261552 = ADVANCED_FACE('',(#261553),#261578,.F.); +#261553 = FACE_BOUND('',#261554,.F.); +#261554 = EDGE_LOOP('',(#261555,#261556,#261564,#261572)); +#261555 = ORIENTED_EDGE('',*,*,#261533,.T.); +#261556 = ORIENTED_EDGE('',*,*,#261557,.T.); +#261557 = EDGE_CURVE('',#261525,#261558,#261560,.T.); +#261558 = VERTEX_POINT('',#261559); +#261559 = CARTESIAN_POINT('',(131.480492,-119.1,-3.5E-02)); +#261560 = LINE('',#261561,#261562); +#261561 = CARTESIAN_POINT('',(131.969509,-119.098079,-3.5E-02)); +#261562 = VECTOR('',#261563,1.); +#261563 = DIRECTION('',(-0.999992284363,-3.928258482337E-03,0.)); +#261564 = ORIENTED_EDGE('',*,*,#261565,.F.); +#261565 = EDGE_CURVE('',#261566,#261558,#261568,.T.); +#261566 = VERTEX_POINT('',#261567); +#261567 = CARTESIAN_POINT('',(131.480492,-119.1,0.)); +#261568 = LINE('',#261569,#261570); +#261569 = CARTESIAN_POINT('',(131.480492,-119.1,0.)); +#261570 = VECTOR('',#261571,1.); +#261571 = DIRECTION('',(0.,0.,-1.)); +#261572 = ORIENTED_EDGE('',*,*,#261573,.F.); +#261573 = EDGE_CURVE('',#261534,#261566,#261574,.T.); +#261574 = LINE('',#261575,#261576); +#261575 = CARTESIAN_POINT('',(131.969509,-119.098079,0.)); +#261576 = VECTOR('',#261577,1.); +#261577 = DIRECTION('',(-0.999992284363,-3.928258482337E-03,0.)); +#261578 = PLANE('',#261579); +#261579 = AXIS2_PLACEMENT_3D('',#261580,#261581,#261582); +#261580 = CARTESIAN_POINT('',(131.969509,-119.098079,0.)); +#261581 = DIRECTION('',(-3.928258482337E-03,0.999992284363,0.)); +#261582 = DIRECTION('',(-0.999992284363,-3.928258482337E-03,0.)); +#261583 = ADVANCED_FACE('',(#261584),#261609,.F.); +#261584 = FACE_BOUND('',#261585,.F.); +#261585 = EDGE_LOOP('',(#261586,#261587,#261595,#261603)); +#261586 = ORIENTED_EDGE('',*,*,#261565,.T.); +#261587 = ORIENTED_EDGE('',*,*,#261588,.T.); +#261588 = EDGE_CURVE('',#261558,#261589,#261591,.T.); +#261589 = VERTEX_POINT('',#261590); +#261590 = CARTESIAN_POINT('',(131.1,-119.480492,-3.5E-02)); +#261591 = LINE('',#261592,#261593); +#261592 = CARTESIAN_POINT('',(131.480492,-119.1,-3.5E-02)); +#261593 = VECTOR('',#261594,1.); +#261594 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#261595 = ORIENTED_EDGE('',*,*,#261596,.F.); +#261596 = EDGE_CURVE('',#261597,#261589,#261599,.T.); +#261597 = VERTEX_POINT('',#261598); +#261598 = CARTESIAN_POINT('',(131.1,-119.480492,0.)); +#261599 = LINE('',#261600,#261601); +#261600 = CARTESIAN_POINT('',(131.1,-119.480492,0.)); +#261601 = VECTOR('',#261602,1.); +#261602 = DIRECTION('',(0.,0.,-1.)); +#261603 = ORIENTED_EDGE('',*,*,#261604,.F.); +#261604 = EDGE_CURVE('',#261566,#261597,#261605,.T.); +#261605 = LINE('',#261606,#261607); +#261606 = CARTESIAN_POINT('',(131.480492,-119.1,0.)); +#261607 = VECTOR('',#261608,1.); +#261608 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#261609 = PLANE('',#261610); +#261610 = AXIS2_PLACEMENT_3D('',#261611,#261612,#261613); +#261611 = CARTESIAN_POINT('',(131.480492,-119.1,0.)); +#261612 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#261613 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#261614 = ADVANCED_FACE('',(#261615),#261640,.F.); +#261615 = FACE_BOUND('',#261616,.F.); +#261616 = EDGE_LOOP('',(#261617,#261618,#261626,#261634)); +#261617 = ORIENTED_EDGE('',*,*,#261596,.T.); +#261618 = ORIENTED_EDGE('',*,*,#261619,.T.); +#261619 = EDGE_CURVE('',#261589,#261620,#261622,.T.); +#261620 = VERTEX_POINT('',#261621); +#261621 = CARTESIAN_POINT('',(131.098079,-120.349067,-3.5E-02)); +#261622 = LINE('',#261623,#261624); +#261623 = CARTESIAN_POINT('',(131.1,-119.480492,-3.5E-02)); +#261624 = VECTOR('',#261625,1.); +#261625 = DIRECTION('',(-2.211663128382E-03,-0.99999755427,0.)); +#261626 = ORIENTED_EDGE('',*,*,#261627,.F.); +#261627 = EDGE_CURVE('',#261628,#261620,#261630,.T.); +#261628 = VERTEX_POINT('',#261629); +#261629 = CARTESIAN_POINT('',(131.098079,-120.349067,0.)); +#261630 = LINE('',#261631,#261632); +#261631 = CARTESIAN_POINT('',(131.098079,-120.349067,0.)); +#261632 = VECTOR('',#261633,1.); +#261633 = DIRECTION('',(0.,0.,-1.)); +#261634 = ORIENTED_EDGE('',*,*,#261635,.F.); +#261635 = EDGE_CURVE('',#261597,#261628,#261636,.T.); +#261636 = LINE('',#261637,#261638); +#261637 = CARTESIAN_POINT('',(131.1,-119.480492,0.)); +#261638 = VECTOR('',#261639,1.); +#261639 = DIRECTION('',(-2.211663128382E-03,-0.99999755427,0.)); +#261640 = PLANE('',#261641); +#261641 = AXIS2_PLACEMENT_3D('',#261642,#261643,#261644); +#261642 = CARTESIAN_POINT('',(131.1,-119.480492,0.)); +#261643 = DIRECTION('',(-0.99999755427,2.211663128382E-03,0.)); +#261644 = DIRECTION('',(-2.211663128382E-03,-0.99999755427,0.)); +#261645 = ADVANCED_FACE('',(#261646),#261671,.F.); +#261646 = FACE_BOUND('',#261647,.F.); +#261647 = EDGE_LOOP('',(#261648,#261649,#261657,#261665)); +#261648 = ORIENTED_EDGE('',*,*,#261627,.T.); +#261649 = ORIENTED_EDGE('',*,*,#261650,.T.); +#261650 = EDGE_CURVE('',#261620,#261651,#261653,.T.); +#261651 = VERTEX_POINT('',#261652); +#261652 = CARTESIAN_POINT('',(131.083147,-120.385116,-3.5E-02)); +#261653 = LINE('',#261654,#261655); +#261654 = CARTESIAN_POINT('',(131.098079,-120.349067,-3.5E-02)); +#261655 = VECTOR('',#261656,1.); +#261656 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261657 = ORIENTED_EDGE('',*,*,#261658,.F.); +#261658 = EDGE_CURVE('',#261659,#261651,#261661,.T.); +#261659 = VERTEX_POINT('',#261660); +#261660 = CARTESIAN_POINT('',(131.083147,-120.385116,0.)); +#261661 = LINE('',#261662,#261663); +#261662 = CARTESIAN_POINT('',(131.083147,-120.385116,0.)); +#261663 = VECTOR('',#261664,1.); +#261664 = DIRECTION('',(0.,0.,-1.)); +#261665 = ORIENTED_EDGE('',*,*,#261666,.F.); +#261666 = EDGE_CURVE('',#261628,#261659,#261667,.T.); +#261667 = LINE('',#261668,#261669); +#261668 = CARTESIAN_POINT('',(131.098079,-120.349067,0.)); +#261669 = VECTOR('',#261670,1.); +#261670 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261671 = PLANE('',#261672); +#261672 = AXIS2_PLACEMENT_3D('',#261673,#261674,#261675); +#261673 = CARTESIAN_POINT('',(131.098079,-120.349067,0.)); +#261674 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#261675 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261676 = ADVANCED_FACE('',(#261677),#261702,.F.); +#261677 = FACE_BOUND('',#261678,.F.); +#261678 = EDGE_LOOP('',(#261679,#261680,#261688,#261696)); +#261679 = ORIENTED_EDGE('',*,*,#261658,.T.); +#261680 = ORIENTED_EDGE('',*,*,#261681,.T.); +#261681 = EDGE_CURVE('',#261651,#261682,#261684,.T.); +#261682 = VERTEX_POINT('',#261683); +#261683 = CARTESIAN_POINT('',(130.699743,-120.771236,-3.5E-02)); +#261684 = LINE('',#261685,#261686); +#261685 = CARTESIAN_POINT('',(131.083147,-120.385116,-3.5E-02)); +#261686 = VECTOR('',#261687,1.); +#261687 = DIRECTION('',(-0.704606691278,-0.709598062713,0.)); +#261688 = ORIENTED_EDGE('',*,*,#261689,.F.); +#261689 = EDGE_CURVE('',#261690,#261682,#261692,.T.); +#261690 = VERTEX_POINT('',#261691); +#261691 = CARTESIAN_POINT('',(130.699743,-120.771236,0.)); +#261692 = LINE('',#261693,#261694); +#261693 = CARTESIAN_POINT('',(130.699743,-120.771236,0.)); +#261694 = VECTOR('',#261695,1.); +#261695 = DIRECTION('',(0.,0.,-1.)); +#261696 = ORIENTED_EDGE('',*,*,#261697,.F.); +#261697 = EDGE_CURVE('',#261659,#261690,#261698,.T.); +#261698 = LINE('',#261699,#261700); +#261699 = CARTESIAN_POINT('',(131.083147,-120.385116,0.)); +#261700 = VECTOR('',#261701,1.); +#261701 = DIRECTION('',(-0.704606691278,-0.709598062713,0.)); +#261702 = PLANE('',#261703); +#261703 = AXIS2_PLACEMENT_3D('',#261704,#261705,#261706); +#261704 = CARTESIAN_POINT('',(131.083147,-120.385116,0.)); +#261705 = DIRECTION('',(-0.709598062713,0.704606691278,0.)); +#261706 = DIRECTION('',(-0.704606691278,-0.709598062713,0.)); +#261707 = ADVANCED_FACE('',(#261708),#261733,.F.); +#261708 = FACE_BOUND('',#261709,.F.); +#261709 = EDGE_LOOP('',(#261710,#261711,#261719,#261727)); +#261710 = ORIENTED_EDGE('',*,*,#261689,.T.); +#261711 = ORIENTED_EDGE('',*,*,#261712,.T.); +#261712 = EDGE_CURVE('',#261682,#261713,#261715,.T.); +#261713 = VERTEX_POINT('',#261714); +#261714 = CARTESIAN_POINT('',(130.698079,-120.788137,-3.5E-02)); +#261715 = LINE('',#261716,#261717); +#261716 = CARTESIAN_POINT('',(130.699743,-120.771236,-3.5E-02)); +#261717 = VECTOR('',#261718,1.); +#261718 = DIRECTION('',(-9.798196257114E-02,-0.995188190751,0.)); +#261719 = ORIENTED_EDGE('',*,*,#261720,.F.); +#261720 = EDGE_CURVE('',#261721,#261713,#261723,.T.); +#261721 = VERTEX_POINT('',#261722); +#261722 = CARTESIAN_POINT('',(130.698079,-120.788137,0.)); +#261723 = LINE('',#261724,#261725); +#261724 = CARTESIAN_POINT('',(130.698079,-120.788137,0.)); +#261725 = VECTOR('',#261726,1.); +#261726 = DIRECTION('',(0.,0.,-1.)); +#261727 = ORIENTED_EDGE('',*,*,#261728,.F.); +#261728 = EDGE_CURVE('',#261690,#261721,#261729,.T.); +#261729 = LINE('',#261730,#261731); +#261730 = CARTESIAN_POINT('',(130.699743,-120.771236,0.)); +#261731 = VECTOR('',#261732,1.); +#261732 = DIRECTION('',(-9.798196257114E-02,-0.995188190751,0.)); +#261733 = PLANE('',#261734); +#261734 = AXIS2_PLACEMENT_3D('',#261735,#261736,#261737); +#261735 = CARTESIAN_POINT('',(130.699743,-120.771236,0.)); +#261736 = DIRECTION('',(-0.995188190751,9.798196257114E-02,0.)); +#261737 = DIRECTION('',(-9.798196257114E-02,-0.995188190751,0.)); +#261738 = ADVANCED_FACE('',(#261739),#261764,.F.); +#261739 = FACE_BOUND('',#261740,.F.); +#261740 = EDGE_LOOP('',(#261741,#261742,#261750,#261758)); +#261741 = ORIENTED_EDGE('',*,*,#261720,.T.); +#261742 = ORIENTED_EDGE('',*,*,#261743,.T.); +#261743 = EDGE_CURVE('',#261713,#261744,#261746,.T.); +#261744 = VERTEX_POINT('',#261745); +#261745 = CARTESIAN_POINT('',(130.683147,-120.824186,-3.5E-02)); +#261746 = LINE('',#261747,#261748); +#261747 = CARTESIAN_POINT('',(130.698079,-120.788137,-3.5E-02)); +#261748 = VECTOR('',#261749,1.); +#261749 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261750 = ORIENTED_EDGE('',*,*,#261751,.F.); +#261751 = EDGE_CURVE('',#261752,#261744,#261754,.T.); +#261752 = VERTEX_POINT('',#261753); +#261753 = CARTESIAN_POINT('',(130.683147,-120.824186,0.)); +#261754 = LINE('',#261755,#261756); +#261755 = CARTESIAN_POINT('',(130.683147,-120.824186,0.)); +#261756 = VECTOR('',#261757,1.); +#261757 = DIRECTION('',(0.,0.,-1.)); +#261758 = ORIENTED_EDGE('',*,*,#261759,.F.); +#261759 = EDGE_CURVE('',#261721,#261752,#261760,.T.); +#261760 = LINE('',#261761,#261762); +#261761 = CARTESIAN_POINT('',(130.698079,-120.788137,0.)); +#261762 = VECTOR('',#261763,1.); +#261763 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261764 = PLANE('',#261765); +#261765 = AXIS2_PLACEMENT_3D('',#261766,#261767,#261768); +#261766 = CARTESIAN_POINT('',(130.698079,-120.788137,0.)); +#261767 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#261768 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#261769 = ADVANCED_FACE('',(#261770),#261795,.F.); +#261770 = FACE_BOUND('',#261771,.F.); +#261771 = EDGE_LOOP('',(#261772,#261773,#261781,#261789)); +#261772 = ORIENTED_EDGE('',*,*,#261751,.T.); +#261773 = ORIENTED_EDGE('',*,*,#261774,.T.); +#261774 = EDGE_CURVE('',#261744,#261775,#261777,.T.); +#261775 = VERTEX_POINT('',#261776); +#261776 = CARTESIAN_POINT('',(130.424185,-121.083147,-3.5E-02)); +#261777 = LINE('',#261778,#261779); +#261778 = CARTESIAN_POINT('',(130.683147,-120.824186,-3.5E-02)); +#261779 = VECTOR('',#261780,1.); +#261780 = DIRECTION('',(-0.707108146459,-0.707105415911,0.)); +#261781 = ORIENTED_EDGE('',*,*,#261782,.F.); +#261782 = EDGE_CURVE('',#261783,#261775,#261785,.T.); +#261783 = VERTEX_POINT('',#261784); +#261784 = CARTESIAN_POINT('',(130.424185,-121.083147,0.)); +#261785 = LINE('',#261786,#261787); +#261786 = CARTESIAN_POINT('',(130.424185,-121.083147,0.)); +#261787 = VECTOR('',#261788,1.); +#261788 = DIRECTION('',(0.,0.,-1.)); +#261789 = ORIENTED_EDGE('',*,*,#261790,.F.); +#261790 = EDGE_CURVE('',#261752,#261783,#261791,.T.); +#261791 = LINE('',#261792,#261793); +#261792 = CARTESIAN_POINT('',(130.683147,-120.824186,0.)); +#261793 = VECTOR('',#261794,1.); +#261794 = DIRECTION('',(-0.707108146459,-0.707105415911,0.)); +#261795 = PLANE('',#261796); +#261796 = AXIS2_PLACEMENT_3D('',#261797,#261798,#261799); +#261797 = CARTESIAN_POINT('',(130.683147,-120.824186,0.)); +#261798 = DIRECTION('',(-0.707105415911,0.707108146459,0.)); +#261799 = DIRECTION('',(-0.707108146459,-0.707105415911,0.)); +#261800 = ADVANCED_FACE('',(#261801),#261826,.F.); +#261801 = FACE_BOUND('',#261802,.F.); +#261802 = EDGE_LOOP('',(#261803,#261804,#261812,#261820)); +#261803 = ORIENTED_EDGE('',*,*,#261782,.T.); +#261804 = ORIENTED_EDGE('',*,*,#261805,.T.); +#261805 = EDGE_CURVE('',#261775,#261806,#261808,.T.); +#261806 = VERTEX_POINT('',#261807); +#261807 = CARTESIAN_POINT('',(130.388137,-121.098079,-3.5E-02)); +#261808 = LINE('',#261809,#261810); +#261809 = CARTESIAN_POINT('',(130.424185,-121.083147,-3.5E-02)); +#261810 = VECTOR('',#261811,1.); +#261811 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#261812 = ORIENTED_EDGE('',*,*,#261813,.F.); +#261813 = EDGE_CURVE('',#261814,#261806,#261816,.T.); +#261814 = VERTEX_POINT('',#261815); +#261815 = CARTESIAN_POINT('',(130.388137,-121.098079,0.)); +#261816 = LINE('',#261817,#261818); +#261817 = CARTESIAN_POINT('',(130.388137,-121.098079,0.)); +#261818 = VECTOR('',#261819,1.); +#261819 = DIRECTION('',(0.,0.,-1.)); +#261820 = ORIENTED_EDGE('',*,*,#261821,.F.); +#261821 = EDGE_CURVE('',#261783,#261814,#261822,.T.); +#261822 = LINE('',#261823,#261824); +#261823 = CARTESIAN_POINT('',(130.424185,-121.083147,0.)); +#261824 = VECTOR('',#261825,1.); +#261825 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#261826 = PLANE('',#261827); +#261827 = AXIS2_PLACEMENT_3D('',#261828,#261829,#261830); +#261828 = CARTESIAN_POINT('',(130.424185,-121.083147,0.)); +#261829 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#261830 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#261831 = ADVANCED_FACE('',(#261832),#261857,.F.); +#261832 = FACE_BOUND('',#261833,.F.); +#261833 = EDGE_LOOP('',(#261834,#261835,#261843,#261851)); +#261834 = ORIENTED_EDGE('',*,*,#261813,.T.); +#261835 = ORIENTED_EDGE('',*,*,#261836,.T.); +#261836 = EDGE_CURVE('',#261806,#261837,#261839,.T.); +#261837 = VERTEX_POINT('',#261838); +#261838 = CARTESIAN_POINT('',(129.32902,-121.098079,-3.5E-02)); +#261839 = LINE('',#261840,#261841); +#261840 = CARTESIAN_POINT('',(130.388137,-121.098079,-3.5E-02)); +#261841 = VECTOR('',#261842,1.); +#261842 = DIRECTION('',(-1.,0.,0.)); +#261843 = ORIENTED_EDGE('',*,*,#261844,.F.); +#261844 = EDGE_CURVE('',#261845,#261837,#261847,.T.); +#261845 = VERTEX_POINT('',#261846); +#261846 = CARTESIAN_POINT('',(129.32902,-121.098079,0.)); +#261847 = LINE('',#261848,#261849); +#261848 = CARTESIAN_POINT('',(129.32902,-121.098079,0.)); +#261849 = VECTOR('',#261850,1.); +#261850 = DIRECTION('',(0.,0.,-1.)); +#261851 = ORIENTED_EDGE('',*,*,#261852,.F.); +#261852 = EDGE_CURVE('',#261814,#261845,#261853,.T.); +#261853 = LINE('',#261854,#261855); +#261854 = CARTESIAN_POINT('',(130.388137,-121.098079,0.)); +#261855 = VECTOR('',#261856,1.); +#261856 = DIRECTION('',(-1.,0.,0.)); +#261857 = PLANE('',#261858); +#261858 = AXIS2_PLACEMENT_3D('',#261859,#261860,#261861); +#261859 = CARTESIAN_POINT('',(130.388137,-121.098079,0.)); +#261860 = DIRECTION('',(0.,1.,0.)); +#261861 = DIRECTION('',(-1.,0.,0.)); +#261862 = ADVANCED_FACE('',(#261863),#261888,.F.); +#261863 = FACE_BOUND('',#261864,.F.); +#261864 = EDGE_LOOP('',(#261865,#261866,#261874,#261882)); +#261865 = ORIENTED_EDGE('',*,*,#261844,.T.); +#261866 = ORIENTED_EDGE('',*,*,#261867,.T.); +#261867 = EDGE_CURVE('',#261837,#261868,#261870,.T.); +#261868 = VERTEX_POINT('',#261869); +#261869 = CARTESIAN_POINT('',(129.292972,-121.083147,-3.5E-02)); +#261870 = LINE('',#261871,#261872); +#261871 = CARTESIAN_POINT('',(129.32902,-121.098079,-3.5E-02)); +#261872 = VECTOR('',#261873,1.); +#261873 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#261874 = ORIENTED_EDGE('',*,*,#261875,.F.); +#261875 = EDGE_CURVE('',#261876,#261868,#261878,.T.); +#261876 = VERTEX_POINT('',#261877); +#261877 = CARTESIAN_POINT('',(129.292972,-121.083147,0.)); +#261878 = LINE('',#261879,#261880); +#261879 = CARTESIAN_POINT('',(129.292972,-121.083147,0.)); +#261880 = VECTOR('',#261881,1.); +#261881 = DIRECTION('',(0.,0.,-1.)); +#261882 = ORIENTED_EDGE('',*,*,#261883,.F.); +#261883 = EDGE_CURVE('',#261845,#261876,#261884,.T.); +#261884 = LINE('',#261885,#261886); +#261885 = CARTESIAN_POINT('',(129.32902,-121.098079,0.)); +#261886 = VECTOR('',#261887,1.); +#261887 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#261888 = PLANE('',#261889); +#261889 = AXIS2_PLACEMENT_3D('',#261890,#261891,#261892); +#261890 = CARTESIAN_POINT('',(129.32902,-121.098079,0.)); +#261891 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#261892 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#261893 = ADVANCED_FACE('',(#261894),#261919,.F.); +#261894 = FACE_BOUND('',#261895,.F.); +#261895 = EDGE_LOOP('',(#261896,#261897,#261905,#261913)); +#261896 = ORIENTED_EDGE('',*,*,#261875,.T.); +#261897 = ORIENTED_EDGE('',*,*,#261898,.T.); +#261898 = EDGE_CURVE('',#261868,#261899,#261901,.T.); +#261899 = VERTEX_POINT('',#261900); +#261900 = CARTESIAN_POINT('',(128.957107,-120.75,-3.5E-02)); +#261901 = LINE('',#261902,#261903); +#261902 = CARTESIAN_POINT('',(129.292972,-121.083147,-3.5E-02)); +#261903 = VECTOR('',#261904,1.); +#261904 = DIRECTION('',(-0.709973689892,0.70422820141,0.)); +#261905 = ORIENTED_EDGE('',*,*,#261906,.F.); +#261906 = EDGE_CURVE('',#261907,#261899,#261909,.T.); +#261907 = VERTEX_POINT('',#261908); +#261908 = CARTESIAN_POINT('',(128.957107,-120.75,0.)); +#261909 = LINE('',#261910,#261911); +#261910 = CARTESIAN_POINT('',(128.957107,-120.75,0.)); +#261911 = VECTOR('',#261912,1.); +#261912 = DIRECTION('',(0.,0.,-1.)); +#261913 = ORIENTED_EDGE('',*,*,#261914,.F.); +#261914 = EDGE_CURVE('',#261876,#261907,#261915,.T.); +#261915 = LINE('',#261916,#261917); +#261916 = CARTESIAN_POINT('',(129.292972,-121.083147,0.)); +#261917 = VECTOR('',#261918,1.); +#261918 = DIRECTION('',(-0.709973689892,0.70422820141,0.)); +#261919 = PLANE('',#261920); +#261920 = AXIS2_PLACEMENT_3D('',#261921,#261922,#261923); +#261921 = CARTESIAN_POINT('',(129.292972,-121.083147,0.)); +#261922 = DIRECTION('',(0.70422820141,0.709973689892,0.)); +#261923 = DIRECTION('',(-0.709973689892,0.70422820141,0.)); +#261924 = ADVANCED_FACE('',(#261925),#261950,.F.); +#261925 = FACE_BOUND('',#261926,.F.); +#261926 = EDGE_LOOP('',(#261927,#261928,#261936,#261944)); +#261927 = ORIENTED_EDGE('',*,*,#261906,.T.); +#261928 = ORIENTED_EDGE('',*,*,#261929,.T.); +#261929 = EDGE_CURVE('',#261899,#261930,#261932,.T.); +#261930 = VERTEX_POINT('',#261931); +#261931 = CARTESIAN_POINT('',(128.542892,-120.75,-3.5E-02)); +#261932 = LINE('',#261933,#261934); +#261933 = CARTESIAN_POINT('',(128.957107,-120.75,-3.5E-02)); +#261934 = VECTOR('',#261935,1.); +#261935 = DIRECTION('',(-1.,0.,0.)); +#261936 = ORIENTED_EDGE('',*,*,#261937,.F.); +#261937 = EDGE_CURVE('',#261938,#261930,#261940,.T.); +#261938 = VERTEX_POINT('',#261939); +#261939 = CARTESIAN_POINT('',(128.542892,-120.75,0.)); +#261940 = LINE('',#261941,#261942); +#261941 = CARTESIAN_POINT('',(128.542892,-120.75,0.)); +#261942 = VECTOR('',#261943,1.); +#261943 = DIRECTION('',(0.,0.,-1.)); +#261944 = ORIENTED_EDGE('',*,*,#261945,.F.); +#261945 = EDGE_CURVE('',#261907,#261938,#261946,.T.); +#261946 = LINE('',#261947,#261948); +#261947 = CARTESIAN_POINT('',(128.957107,-120.75,0.)); +#261948 = VECTOR('',#261949,1.); +#261949 = DIRECTION('',(-1.,0.,0.)); +#261950 = PLANE('',#261951); +#261951 = AXIS2_PLACEMENT_3D('',#261952,#261953,#261954); +#261952 = CARTESIAN_POINT('',(128.957107,-120.75,0.)); +#261953 = DIRECTION('',(0.,1.,0.)); +#261954 = DIRECTION('',(-1.,0.,0.)); +#261955 = ADVANCED_FACE('',(#261956),#261981,.F.); +#261956 = FACE_BOUND('',#261957,.F.); +#261957 = EDGE_LOOP('',(#261958,#261959,#261967,#261975)); +#261958 = ORIENTED_EDGE('',*,*,#261937,.T.); +#261959 = ORIENTED_EDGE('',*,*,#261960,.T.); +#261960 = EDGE_CURVE('',#261930,#261961,#261963,.T.); +#261961 = VERTEX_POINT('',#261962); +#261962 = CARTESIAN_POINT('',(128.207028,-121.083147,-3.5E-02)); +#261963 = LINE('',#261964,#261965); +#261964 = CARTESIAN_POINT('',(128.542892,-120.75,-3.5E-02)); +#261965 = VECTOR('',#261966,1.); +#261966 = DIRECTION('',(-0.709972641545,-0.704229258309,0.)); +#261967 = ORIENTED_EDGE('',*,*,#261968,.F.); +#261968 = EDGE_CURVE('',#261969,#261961,#261971,.T.); +#261969 = VERTEX_POINT('',#261970); +#261970 = CARTESIAN_POINT('',(128.207028,-121.083147,0.)); +#261971 = LINE('',#261972,#261973); +#261972 = CARTESIAN_POINT('',(128.207028,-121.083147,0.)); +#261973 = VECTOR('',#261974,1.); +#261974 = DIRECTION('',(0.,0.,-1.)); +#261975 = ORIENTED_EDGE('',*,*,#261976,.F.); +#261976 = EDGE_CURVE('',#261938,#261969,#261977,.T.); +#261977 = LINE('',#261978,#261979); +#261978 = CARTESIAN_POINT('',(128.542892,-120.75,0.)); +#261979 = VECTOR('',#261980,1.); +#261980 = DIRECTION('',(-0.709972641545,-0.704229258309,0.)); +#261981 = PLANE('',#261982); +#261982 = AXIS2_PLACEMENT_3D('',#261983,#261984,#261985); +#261983 = CARTESIAN_POINT('',(128.542892,-120.75,0.)); +#261984 = DIRECTION('',(-0.704229258309,0.709972641545,0.)); +#261985 = DIRECTION('',(-0.709972641545,-0.704229258309,0.)); +#261986 = ADVANCED_FACE('',(#261987),#262012,.F.); +#261987 = FACE_BOUND('',#261988,.F.); +#261988 = EDGE_LOOP('',(#261989,#261990,#261998,#262006)); +#261989 = ORIENTED_EDGE('',*,*,#261968,.T.); +#261990 = ORIENTED_EDGE('',*,*,#261991,.T.); +#261991 = EDGE_CURVE('',#261961,#261992,#261994,.T.); +#261992 = VERTEX_POINT('',#261993); +#261993 = CARTESIAN_POINT('',(128.17098,-121.098079,-3.5E-02)); +#261994 = LINE('',#261995,#261996); +#261995 = CARTESIAN_POINT('',(128.207028,-121.083147,-3.5E-02)); +#261996 = VECTOR('',#261997,1.); +#261997 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#261998 = ORIENTED_EDGE('',*,*,#261999,.F.); +#261999 = EDGE_CURVE('',#262000,#261992,#262002,.T.); +#262000 = VERTEX_POINT('',#262001); +#262001 = CARTESIAN_POINT('',(128.17098,-121.098079,0.)); +#262002 = LINE('',#262003,#262004); +#262003 = CARTESIAN_POINT('',(128.17098,-121.098079,0.)); +#262004 = VECTOR('',#262005,1.); +#262005 = DIRECTION('',(0.,0.,-1.)); +#262006 = ORIENTED_EDGE('',*,*,#262007,.F.); +#262007 = EDGE_CURVE('',#261969,#262000,#262008,.T.); +#262008 = LINE('',#262009,#262010); +#262009 = CARTESIAN_POINT('',(128.207028,-121.083147,0.)); +#262010 = VECTOR('',#262011,1.); +#262011 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#262012 = PLANE('',#262013); +#262013 = AXIS2_PLACEMENT_3D('',#262014,#262015,#262016); +#262014 = CARTESIAN_POINT('',(128.207028,-121.083147,0.)); +#262015 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#262016 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#262017 = ADVANCED_FACE('',(#262018),#262043,.F.); +#262018 = FACE_BOUND('',#262019,.F.); +#262019 = EDGE_LOOP('',(#262020,#262021,#262029,#262037)); +#262020 = ORIENTED_EDGE('',*,*,#261999,.T.); +#262021 = ORIENTED_EDGE('',*,*,#262022,.T.); +#262022 = EDGE_CURVE('',#261992,#262023,#262025,.T.); +#262023 = VERTEX_POINT('',#262024); +#262024 = CARTESIAN_POINT('',(126.020491,-121.098079,-3.5E-02)); +#262025 = LINE('',#262026,#262027); +#262026 = CARTESIAN_POINT('',(128.17098,-121.098079,-3.5E-02)); +#262027 = VECTOR('',#262028,1.); +#262028 = DIRECTION('',(-1.,0.,0.)); +#262029 = ORIENTED_EDGE('',*,*,#262030,.F.); +#262030 = EDGE_CURVE('',#262031,#262023,#262033,.T.); +#262031 = VERTEX_POINT('',#262032); +#262032 = CARTESIAN_POINT('',(126.020491,-121.098079,0.)); +#262033 = LINE('',#262034,#262035); +#262034 = CARTESIAN_POINT('',(126.020491,-121.098079,0.)); +#262035 = VECTOR('',#262036,1.); +#262036 = DIRECTION('',(0.,0.,-1.)); +#262037 = ORIENTED_EDGE('',*,*,#262038,.F.); +#262038 = EDGE_CURVE('',#262000,#262031,#262039,.T.); +#262039 = LINE('',#262040,#262041); +#262040 = CARTESIAN_POINT('',(128.17098,-121.098079,0.)); +#262041 = VECTOR('',#262042,1.); +#262042 = DIRECTION('',(-1.,0.,0.)); +#262043 = PLANE('',#262044); +#262044 = AXIS2_PLACEMENT_3D('',#262045,#262046,#262047); +#262045 = CARTESIAN_POINT('',(128.17098,-121.098079,0.)); +#262046 = DIRECTION('',(0.,1.,0.)); +#262047 = DIRECTION('',(-1.,0.,0.)); +#262048 = ADVANCED_FACE('',(#262049),#262076,.T.); +#262049 = FACE_BOUND('',#262050,.F.); +#262050 = EDGE_LOOP('',(#262051,#262052,#262061,#262069)); +#262051 = ORIENTED_EDGE('',*,*,#262030,.T.); +#262052 = ORIENTED_EDGE('',*,*,#262053,.T.); +#262053 = EDGE_CURVE('',#262023,#262054,#262056,.T.); +#262054 = VERTEX_POINT('',#262055); +#262055 = CARTESIAN_POINT('',(126.020491,-120.901921,-3.5E-02)); +#262056 = CIRCLE('',#262057,0.100000456609); +#262057 = AXIS2_PLACEMENT_3D('',#262058,#262059,#262060); +#262058 = CARTESIAN_POINT('',(126.04,-121.,-3.5E-02)); +#262059 = DIRECTION('',(0.,0.,-1.)); +#262060 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#262061 = ORIENTED_EDGE('',*,*,#262062,.F.); +#262062 = EDGE_CURVE('',#262063,#262054,#262065,.T.); +#262063 = VERTEX_POINT('',#262064); +#262064 = CARTESIAN_POINT('',(126.020491,-120.901921,0.)); +#262065 = LINE('',#262066,#262067); +#262066 = CARTESIAN_POINT('',(126.020491,-120.901921,0.)); +#262067 = VECTOR('',#262068,1.); +#262068 = DIRECTION('',(0.,0.,-1.)); +#262069 = ORIENTED_EDGE('',*,*,#262070,.F.); +#262070 = EDGE_CURVE('',#262031,#262063,#262071,.T.); +#262071 = CIRCLE('',#262072,0.100000456609); +#262072 = AXIS2_PLACEMENT_3D('',#262073,#262074,#262075); +#262073 = CARTESIAN_POINT('',(126.04,-121.,0.)); +#262074 = DIRECTION('',(0.,0.,-1.)); +#262075 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#262076 = CYLINDRICAL_SURFACE('',#262077,0.100000456609); +#262077 = AXIS2_PLACEMENT_3D('',#262078,#262079,#262080); +#262078 = CARTESIAN_POINT('',(126.04,-121.,0.)); +#262079 = DIRECTION('',(-0.,-0.,1.)); +#262080 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#262081 = ADVANCED_FACE('',(#262082),#262107,.F.); +#262082 = FACE_BOUND('',#262083,.F.); +#262083 = EDGE_LOOP('',(#262084,#262085,#262093,#262101)); +#262084 = ORIENTED_EDGE('',*,*,#262062,.T.); +#262085 = ORIENTED_EDGE('',*,*,#262086,.T.); +#262086 = EDGE_CURVE('',#262054,#262087,#262089,.T.); +#262087 = VERTEX_POINT('',#262088); +#262088 = CARTESIAN_POINT('',(128.110049,-120.9,-3.5E-02)); +#262089 = LINE('',#262090,#262091); +#262090 = CARTESIAN_POINT('',(126.020491,-120.901921,-3.5E-02)); +#262091 = VECTOR('',#262092,1.); +#262092 = DIRECTION('',(0.999999577414,9.19332791053E-04,0.)); +#262093 = ORIENTED_EDGE('',*,*,#262094,.F.); +#262094 = EDGE_CURVE('',#262095,#262087,#262097,.T.); +#262095 = VERTEX_POINT('',#262096); +#262096 = CARTESIAN_POINT('',(128.110049,-120.9,0.)); +#262097 = LINE('',#262098,#262099); +#262098 = CARTESIAN_POINT('',(128.110049,-120.9,0.)); +#262099 = VECTOR('',#262100,1.); +#262100 = DIRECTION('',(0.,0.,-1.)); +#262101 = ORIENTED_EDGE('',*,*,#262102,.F.); +#262102 = EDGE_CURVE('',#262063,#262095,#262103,.T.); +#262103 = LINE('',#262104,#262105); +#262104 = CARTESIAN_POINT('',(126.020491,-120.901921,0.)); +#262105 = VECTOR('',#262106,1.); +#262106 = DIRECTION('',(0.999999577414,9.19332791053E-04,0.)); +#262107 = PLANE('',#262108); +#262108 = AXIS2_PLACEMENT_3D('',#262109,#262110,#262111); +#262109 = CARTESIAN_POINT('',(126.020491,-120.901921,0.)); +#262110 = DIRECTION('',(9.19332791053E-04,-0.999999577414,0.)); +#262111 = DIRECTION('',(0.999999577414,9.19332791053E-04,0.)); +#262112 = ADVANCED_FACE('',(#262113),#262138,.F.); +#262113 = FACE_BOUND('',#262114,.F.); +#262114 = EDGE_LOOP('',(#262115,#262116,#262124,#262132)); +#262115 = ORIENTED_EDGE('',*,*,#262094,.T.); +#262116 = ORIENTED_EDGE('',*,*,#262117,.T.); +#262117 = EDGE_CURVE('',#262087,#262118,#262120,.T.); +#262118 = VERTEX_POINT('',#262119); +#262119 = CARTESIAN_POINT('',(128.445914,-120.566853,-3.5E-02)); +#262120 = LINE('',#262121,#262122); +#262121 = CARTESIAN_POINT('',(128.110049,-120.9,-3.5E-02)); +#262122 = VECTOR('',#262123,1.); +#262123 = DIRECTION('',(0.709973689892,0.70422820141,0.)); +#262124 = ORIENTED_EDGE('',*,*,#262125,.F.); +#262125 = EDGE_CURVE('',#262126,#262118,#262128,.T.); +#262126 = VERTEX_POINT('',#262127); +#262127 = CARTESIAN_POINT('',(128.445914,-120.566853,0.)); +#262128 = LINE('',#262129,#262130); +#262129 = CARTESIAN_POINT('',(128.445914,-120.566853,0.)); +#262130 = VECTOR('',#262131,1.); +#262131 = DIRECTION('',(0.,0.,-1.)); +#262132 = ORIENTED_EDGE('',*,*,#262133,.F.); +#262133 = EDGE_CURVE('',#262095,#262126,#262134,.T.); +#262134 = LINE('',#262135,#262136); +#262135 = CARTESIAN_POINT('',(128.110049,-120.9,0.)); +#262136 = VECTOR('',#262137,1.); +#262137 = DIRECTION('',(0.709973689892,0.70422820141,0.)); +#262138 = PLANE('',#262139); +#262139 = AXIS2_PLACEMENT_3D('',#262140,#262141,#262142); +#262140 = CARTESIAN_POINT('',(128.110049,-120.9,0.)); +#262141 = DIRECTION('',(0.70422820141,-0.709973689892,0.)); +#262142 = DIRECTION('',(0.709973689892,0.70422820141,0.)); +#262143 = ADVANCED_FACE('',(#262144),#262169,.F.); +#262144 = FACE_BOUND('',#262145,.F.); +#262145 = EDGE_LOOP('',(#262146,#262147,#262155,#262163)); +#262146 = ORIENTED_EDGE('',*,*,#262125,.T.); +#262147 = ORIENTED_EDGE('',*,*,#262148,.T.); +#262148 = EDGE_CURVE('',#262118,#262149,#262151,.T.); +#262149 = VERTEX_POINT('',#262150); +#262150 = CARTESIAN_POINT('',(128.481962,-120.551921,-3.5E-02)); +#262151 = LINE('',#262152,#262153); +#262152 = CARTESIAN_POINT('',(128.445914,-120.566853,-3.5E-02)); +#262153 = VECTOR('',#262154,1.); +#262154 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262155 = ORIENTED_EDGE('',*,*,#262156,.F.); +#262156 = EDGE_CURVE('',#262157,#262149,#262159,.T.); +#262157 = VERTEX_POINT('',#262158); +#262158 = CARTESIAN_POINT('',(128.481962,-120.551921,0.)); +#262159 = LINE('',#262160,#262161); +#262160 = CARTESIAN_POINT('',(128.481962,-120.551921,0.)); +#262161 = VECTOR('',#262162,1.); +#262162 = DIRECTION('',(0.,0.,-1.)); +#262163 = ORIENTED_EDGE('',*,*,#262164,.F.); +#262164 = EDGE_CURVE('',#262126,#262157,#262165,.T.); +#262165 = LINE('',#262166,#262167); +#262166 = CARTESIAN_POINT('',(128.445914,-120.566853,0.)); +#262167 = VECTOR('',#262168,1.); +#262168 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262169 = PLANE('',#262170); +#262170 = AXIS2_PLACEMENT_3D('',#262171,#262172,#262173); +#262171 = CARTESIAN_POINT('',(128.445914,-120.566853,0.)); +#262172 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#262173 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262174 = ADVANCED_FACE('',(#262175),#262200,.F.); +#262175 = FACE_BOUND('',#262176,.F.); +#262176 = EDGE_LOOP('',(#262177,#262178,#262186,#262194)); +#262177 = ORIENTED_EDGE('',*,*,#262156,.T.); +#262178 = ORIENTED_EDGE('',*,*,#262179,.T.); +#262179 = EDGE_CURVE('',#262149,#262180,#262182,.T.); +#262180 = VERTEX_POINT('',#262181); +#262181 = CARTESIAN_POINT('',(129.018038,-120.551921,-3.5E-02)); +#262182 = LINE('',#262183,#262184); +#262183 = CARTESIAN_POINT('',(128.481962,-120.551921,-3.5E-02)); +#262184 = VECTOR('',#262185,1.); +#262185 = DIRECTION('',(1.,0.,0.)); +#262186 = ORIENTED_EDGE('',*,*,#262187,.F.); +#262187 = EDGE_CURVE('',#262188,#262180,#262190,.T.); +#262188 = VERTEX_POINT('',#262189); +#262189 = CARTESIAN_POINT('',(129.018038,-120.551921,0.)); +#262190 = LINE('',#262191,#262192); +#262191 = CARTESIAN_POINT('',(129.018038,-120.551921,0.)); +#262192 = VECTOR('',#262193,1.); +#262193 = DIRECTION('',(0.,0.,-1.)); +#262194 = ORIENTED_EDGE('',*,*,#262195,.F.); +#262195 = EDGE_CURVE('',#262157,#262188,#262196,.T.); +#262196 = LINE('',#262197,#262198); +#262197 = CARTESIAN_POINT('',(128.481962,-120.551921,0.)); +#262198 = VECTOR('',#262199,1.); +#262199 = DIRECTION('',(1.,0.,0.)); +#262200 = PLANE('',#262201); +#262201 = AXIS2_PLACEMENT_3D('',#262202,#262203,#262204); +#262202 = CARTESIAN_POINT('',(128.481962,-120.551921,0.)); +#262203 = DIRECTION('',(0.,-1.,0.)); +#262204 = DIRECTION('',(1.,0.,0.)); +#262205 = ADVANCED_FACE('',(#262206),#262231,.F.); +#262206 = FACE_BOUND('',#262207,.F.); +#262207 = EDGE_LOOP('',(#262208,#262209,#262217,#262225)); +#262208 = ORIENTED_EDGE('',*,*,#262187,.T.); +#262209 = ORIENTED_EDGE('',*,*,#262210,.T.); +#262210 = EDGE_CURVE('',#262180,#262211,#262213,.T.); +#262211 = VERTEX_POINT('',#262212); +#262212 = CARTESIAN_POINT('',(129.054086,-120.566853,-3.5E-02)); +#262213 = LINE('',#262214,#262215); +#262214 = CARTESIAN_POINT('',(129.018038,-120.551921,-3.5E-02)); +#262215 = VECTOR('',#262216,1.); +#262216 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#262217 = ORIENTED_EDGE('',*,*,#262218,.F.); +#262218 = EDGE_CURVE('',#262219,#262211,#262221,.T.); +#262219 = VERTEX_POINT('',#262220); +#262220 = CARTESIAN_POINT('',(129.054086,-120.566853,0.)); +#262221 = LINE('',#262222,#262223); +#262222 = CARTESIAN_POINT('',(129.054086,-120.566853,0.)); +#262223 = VECTOR('',#262224,1.); +#262224 = DIRECTION('',(0.,0.,-1.)); +#262225 = ORIENTED_EDGE('',*,*,#262226,.F.); +#262226 = EDGE_CURVE('',#262188,#262219,#262227,.T.); +#262227 = LINE('',#262228,#262229); +#262228 = CARTESIAN_POINT('',(129.018038,-120.551921,0.)); +#262229 = VECTOR('',#262230,1.); +#262230 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#262231 = PLANE('',#262232); +#262232 = AXIS2_PLACEMENT_3D('',#262233,#262234,#262235); +#262233 = CARTESIAN_POINT('',(129.018038,-120.551921,0.)); +#262234 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#262235 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#262236 = ADVANCED_FACE('',(#262237),#262262,.F.); +#262237 = FACE_BOUND('',#262238,.F.); +#262238 = EDGE_LOOP('',(#262239,#262240,#262248,#262256)); +#262239 = ORIENTED_EDGE('',*,*,#262218,.T.); +#262240 = ORIENTED_EDGE('',*,*,#262241,.T.); +#262241 = EDGE_CURVE('',#262211,#262242,#262244,.T.); +#262242 = VERTEX_POINT('',#262243); +#262243 = CARTESIAN_POINT('',(129.38995,-120.9,-3.5E-02)); +#262244 = LINE('',#262245,#262246); +#262245 = CARTESIAN_POINT('',(129.054086,-120.566853,-3.5E-02)); +#262246 = VECTOR('',#262247,1.); +#262247 = DIRECTION('',(0.709972641545,-0.704229258309,0.)); +#262248 = ORIENTED_EDGE('',*,*,#262249,.F.); +#262249 = EDGE_CURVE('',#262250,#262242,#262252,.T.); +#262250 = VERTEX_POINT('',#262251); +#262251 = CARTESIAN_POINT('',(129.38995,-120.9,0.)); +#262252 = LINE('',#262253,#262254); +#262253 = CARTESIAN_POINT('',(129.38995,-120.9,0.)); +#262254 = VECTOR('',#262255,1.); +#262255 = DIRECTION('',(0.,0.,-1.)); +#262256 = ORIENTED_EDGE('',*,*,#262257,.F.); +#262257 = EDGE_CURVE('',#262219,#262250,#262258,.T.); +#262258 = LINE('',#262259,#262260); +#262259 = CARTESIAN_POINT('',(129.054086,-120.566853,0.)); +#262260 = VECTOR('',#262261,1.); +#262261 = DIRECTION('',(0.709972641545,-0.704229258309,0.)); +#262262 = PLANE('',#262263); +#262263 = AXIS2_PLACEMENT_3D('',#262264,#262265,#262266); +#262264 = CARTESIAN_POINT('',(129.054086,-120.566853,0.)); +#262265 = DIRECTION('',(-0.704229258309,-0.709972641545,-0.)); +#262266 = DIRECTION('',(0.709972641545,-0.704229258309,0.)); +#262267 = ADVANCED_FACE('',(#262268),#262293,.F.); +#262268 = FACE_BOUND('',#262269,.F.); +#262269 = EDGE_LOOP('',(#262270,#262271,#262279,#262287)); +#262270 = ORIENTED_EDGE('',*,*,#262249,.T.); +#262271 = ORIENTED_EDGE('',*,*,#262272,.T.); +#262272 = EDGE_CURVE('',#262242,#262273,#262275,.T.); +#262273 = VERTEX_POINT('',#262274); +#262274 = CARTESIAN_POINT('',(130.327206,-120.9,-3.5E-02)); +#262275 = LINE('',#262276,#262277); +#262276 = CARTESIAN_POINT('',(129.38995,-120.9,-3.5E-02)); +#262277 = VECTOR('',#262278,1.); +#262278 = DIRECTION('',(1.,0.,0.)); +#262279 = ORIENTED_EDGE('',*,*,#262280,.F.); +#262280 = EDGE_CURVE('',#262281,#262273,#262283,.T.); +#262281 = VERTEX_POINT('',#262282); +#262282 = CARTESIAN_POINT('',(130.327206,-120.9,0.)); +#262283 = LINE('',#262284,#262285); +#262284 = CARTESIAN_POINT('',(130.327206,-120.9,0.)); +#262285 = VECTOR('',#262286,1.); +#262286 = DIRECTION('',(0.,0.,-1.)); +#262287 = ORIENTED_EDGE('',*,*,#262288,.F.); +#262288 = EDGE_CURVE('',#262250,#262281,#262289,.T.); +#262289 = LINE('',#262290,#262291); +#262290 = CARTESIAN_POINT('',(129.38995,-120.9,0.)); +#262291 = VECTOR('',#262292,1.); +#262292 = DIRECTION('',(1.,0.,0.)); +#262293 = PLANE('',#262294); +#262294 = AXIS2_PLACEMENT_3D('',#262295,#262296,#262297); +#262295 = CARTESIAN_POINT('',(129.38995,-120.9,0.)); +#262296 = DIRECTION('',(0.,-1.,0.)); +#262297 = DIRECTION('',(1.,0.,0.)); +#262298 = ADVANCED_FACE('',(#262299),#262324,.F.); +#262299 = FACE_BOUND('',#262300,.F.); +#262300 = EDGE_LOOP('',(#262301,#262302,#262310,#262318)); +#262301 = ORIENTED_EDGE('',*,*,#262280,.T.); +#262302 = ORIENTED_EDGE('',*,*,#262303,.T.); +#262303 = EDGE_CURVE('',#262273,#262304,#262306,.T.); +#262304 = VERTEX_POINT('',#262305); +#262305 = CARTESIAN_POINT('',(130.500256,-120.72695,-3.5E-02)); +#262306 = LINE('',#262307,#262308); +#262307 = CARTESIAN_POINT('',(130.327206,-120.9,-3.5E-02)); +#262308 = VECTOR('',#262309,1.); +#262309 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262310 = ORIENTED_EDGE('',*,*,#262311,.F.); +#262311 = EDGE_CURVE('',#262312,#262304,#262314,.T.); +#262312 = VERTEX_POINT('',#262313); +#262313 = CARTESIAN_POINT('',(130.500256,-120.72695,0.)); +#262314 = LINE('',#262315,#262316); +#262315 = CARTESIAN_POINT('',(130.500256,-120.72695,0.)); +#262316 = VECTOR('',#262317,1.); +#262317 = DIRECTION('',(0.,0.,-1.)); +#262318 = ORIENTED_EDGE('',*,*,#262319,.F.); +#262319 = EDGE_CURVE('',#262281,#262312,#262320,.T.); +#262320 = LINE('',#262321,#262322); +#262321 = CARTESIAN_POINT('',(130.327206,-120.9,0.)); +#262322 = VECTOR('',#262323,1.); +#262323 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262324 = PLANE('',#262325); +#262325 = AXIS2_PLACEMENT_3D('',#262326,#262327,#262328); +#262326 = CARTESIAN_POINT('',(130.327206,-120.9,0.)); +#262327 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#262328 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262329 = ADVANCED_FACE('',(#262330),#262355,.F.); +#262330 = FACE_BOUND('',#262331,.F.); +#262331 = EDGE_LOOP('',(#262332,#262333,#262341,#262349)); +#262332 = ORIENTED_EDGE('',*,*,#262311,.T.); +#262333 = ORIENTED_EDGE('',*,*,#262334,.T.); +#262334 = EDGE_CURVE('',#262304,#262335,#262337,.T.); +#262335 = VERTEX_POINT('',#262336); +#262336 = CARTESIAN_POINT('',(130.501921,-120.710049,-3.5E-02)); +#262337 = LINE('',#262338,#262339); +#262338 = CARTESIAN_POINT('',(130.500256,-120.72695,-3.5E-02)); +#262339 = VECTOR('',#262340,1.); +#262340 = DIRECTION('',(9.804028014923E-02,0.995182447327,0.)); +#262341 = ORIENTED_EDGE('',*,*,#262342,.F.); +#262342 = EDGE_CURVE('',#262343,#262335,#262345,.T.); +#262343 = VERTEX_POINT('',#262344); +#262344 = CARTESIAN_POINT('',(130.501921,-120.710049,0.)); +#262345 = LINE('',#262346,#262347); +#262346 = CARTESIAN_POINT('',(130.501921,-120.710049,0.)); +#262347 = VECTOR('',#262348,1.); +#262348 = DIRECTION('',(0.,0.,-1.)); +#262349 = ORIENTED_EDGE('',*,*,#262350,.F.); +#262350 = EDGE_CURVE('',#262312,#262343,#262351,.T.); +#262351 = LINE('',#262352,#262353); +#262352 = CARTESIAN_POINT('',(130.500256,-120.72695,0.)); +#262353 = VECTOR('',#262354,1.); +#262354 = DIRECTION('',(9.804028014923E-02,0.995182447327,0.)); +#262355 = PLANE('',#262356); +#262356 = AXIS2_PLACEMENT_3D('',#262357,#262358,#262359); +#262357 = CARTESIAN_POINT('',(130.500256,-120.72695,0.)); +#262358 = DIRECTION('',(0.995182447327,-9.804028014923E-02,0.)); +#262359 = DIRECTION('',(9.804028014923E-02,0.995182447327,0.)); +#262360 = ADVANCED_FACE('',(#262361),#262386,.F.); +#262361 = FACE_BOUND('',#262362,.F.); +#262362 = EDGE_LOOP('',(#262363,#262364,#262372,#262380)); +#262363 = ORIENTED_EDGE('',*,*,#262342,.T.); +#262364 = ORIENTED_EDGE('',*,*,#262365,.T.); +#262365 = EDGE_CURVE('',#262335,#262366,#262368,.T.); +#262366 = VERTEX_POINT('',#262367); +#262367 = CARTESIAN_POINT('',(130.516853,-120.674001,-3.5E-02)); +#262368 = LINE('',#262369,#262370); +#262369 = CARTESIAN_POINT('',(130.501921,-120.710049,-3.5E-02)); +#262370 = VECTOR('',#262371,1.); +#262371 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262372 = ORIENTED_EDGE('',*,*,#262373,.F.); +#262373 = EDGE_CURVE('',#262374,#262366,#262376,.T.); +#262374 = VERTEX_POINT('',#262375); +#262375 = CARTESIAN_POINT('',(130.516853,-120.674001,0.)); +#262376 = LINE('',#262377,#262378); +#262377 = CARTESIAN_POINT('',(130.516853,-120.674001,0.)); +#262378 = VECTOR('',#262379,1.); +#262379 = DIRECTION('',(0.,0.,-1.)); +#262380 = ORIENTED_EDGE('',*,*,#262381,.F.); +#262381 = EDGE_CURVE('',#262343,#262374,#262382,.T.); +#262382 = LINE('',#262383,#262384); +#262383 = CARTESIAN_POINT('',(130.501921,-120.710049,0.)); +#262384 = VECTOR('',#262385,1.); +#262385 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262386 = PLANE('',#262387); +#262387 = AXIS2_PLACEMENT_3D('',#262388,#262389,#262390); +#262388 = CARTESIAN_POINT('',(130.501921,-120.710049,0.)); +#262389 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#262390 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262391 = ADVANCED_FACE('',(#262392),#262417,.F.); +#262392 = FACE_BOUND('',#262393,.F.); +#262393 = EDGE_LOOP('',(#262394,#262395,#262403,#262411)); +#262394 = ORIENTED_EDGE('',*,*,#262373,.T.); +#262395 = ORIENTED_EDGE('',*,*,#262396,.T.); +#262396 = EDGE_CURVE('',#262366,#262397,#262399,.T.); +#262397 = VERTEX_POINT('',#262398); +#262398 = CARTESIAN_POINT('',(130.9,-120.288136,-3.5E-02)); +#262399 = LINE('',#262400,#262401); +#262400 = CARTESIAN_POINT('',(130.516853,-120.674001,-3.5E-02)); +#262401 = VECTOR('',#262402,1.); +#262402 = DIRECTION('',(0.704603178368,0.709601550896,0.)); +#262403 = ORIENTED_EDGE('',*,*,#262404,.F.); +#262404 = EDGE_CURVE('',#262405,#262397,#262407,.T.); +#262405 = VERTEX_POINT('',#262406); +#262406 = CARTESIAN_POINT('',(130.9,-120.288136,0.)); +#262407 = LINE('',#262408,#262409); +#262408 = CARTESIAN_POINT('',(130.9,-120.288136,0.)); +#262409 = VECTOR('',#262410,1.); +#262410 = DIRECTION('',(0.,0.,-1.)); +#262411 = ORIENTED_EDGE('',*,*,#262412,.F.); +#262412 = EDGE_CURVE('',#262374,#262405,#262413,.T.); +#262413 = LINE('',#262414,#262415); +#262414 = CARTESIAN_POINT('',(130.516853,-120.674001,0.)); +#262415 = VECTOR('',#262416,1.); +#262416 = DIRECTION('',(0.704603178368,0.709601550896,0.)); +#262417 = PLANE('',#262418); +#262418 = AXIS2_PLACEMENT_3D('',#262419,#262420,#262421); +#262419 = CARTESIAN_POINT('',(130.516853,-120.674001,0.)); +#262420 = DIRECTION('',(0.709601550896,-0.704603178368,0.)); +#262421 = DIRECTION('',(0.704603178368,0.709601550896,0.)); +#262422 = ADVANCED_FACE('',(#262423),#262448,.F.); +#262423 = FACE_BOUND('',#262424,.F.); +#262424 = EDGE_LOOP('',(#262425,#262426,#262434,#262442)); +#262425 = ORIENTED_EDGE('',*,*,#262404,.T.); +#262426 = ORIENTED_EDGE('',*,*,#262427,.T.); +#262427 = EDGE_CURVE('',#262397,#262428,#262430,.T.); +#262428 = VERTEX_POINT('',#262429); +#262429 = CARTESIAN_POINT('',(130.901921,-119.419561,-3.5E-02)); +#262430 = LINE('',#262431,#262432); +#262431 = CARTESIAN_POINT('',(130.9,-120.288136,-3.5E-02)); +#262432 = VECTOR('',#262433,1.); +#262433 = DIRECTION('',(2.211663128382E-03,0.99999755427,0.)); +#262434 = ORIENTED_EDGE('',*,*,#262435,.F.); +#262435 = EDGE_CURVE('',#262436,#262428,#262438,.T.); +#262436 = VERTEX_POINT('',#262437); +#262437 = CARTESIAN_POINT('',(130.901921,-119.419561,0.)); +#262438 = LINE('',#262439,#262440); +#262439 = CARTESIAN_POINT('',(130.901921,-119.419561,0.)); +#262440 = VECTOR('',#262441,1.); +#262441 = DIRECTION('',(0.,0.,-1.)); +#262442 = ORIENTED_EDGE('',*,*,#262443,.F.); +#262443 = EDGE_CURVE('',#262405,#262436,#262444,.T.); +#262444 = LINE('',#262445,#262446); +#262445 = CARTESIAN_POINT('',(130.9,-120.288136,0.)); +#262446 = VECTOR('',#262447,1.); +#262447 = DIRECTION('',(2.211663128382E-03,0.99999755427,0.)); +#262448 = PLANE('',#262449); +#262449 = AXIS2_PLACEMENT_3D('',#262450,#262451,#262452); +#262450 = CARTESIAN_POINT('',(130.9,-120.288136,0.)); +#262451 = DIRECTION('',(0.99999755427,-2.211663128382E-03,0.)); +#262452 = DIRECTION('',(2.211663128382E-03,0.99999755427,0.)); +#262453 = ADVANCED_FACE('',(#262454),#262479,.F.); +#262454 = FACE_BOUND('',#262455,.F.); +#262455 = EDGE_LOOP('',(#262456,#262457,#262465,#262473)); +#262456 = ORIENTED_EDGE('',*,*,#262435,.T.); +#262457 = ORIENTED_EDGE('',*,*,#262458,.T.); +#262458 = EDGE_CURVE('',#262428,#262459,#262461,.T.); +#262459 = VERTEX_POINT('',#262460); +#262460 = CARTESIAN_POINT('',(130.916853,-119.383513,-3.5E-02)); +#262461 = LINE('',#262462,#262463); +#262462 = CARTESIAN_POINT('',(130.901921,-119.419561,-3.5E-02)); +#262463 = VECTOR('',#262464,1.); +#262464 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262465 = ORIENTED_EDGE('',*,*,#262466,.F.); +#262466 = EDGE_CURVE('',#262467,#262459,#262469,.T.); +#262467 = VERTEX_POINT('',#262468); +#262468 = CARTESIAN_POINT('',(130.916853,-119.383513,0.)); +#262469 = LINE('',#262470,#262471); +#262470 = CARTESIAN_POINT('',(130.916853,-119.383513,0.)); +#262471 = VECTOR('',#262472,1.); +#262472 = DIRECTION('',(0.,0.,-1.)); +#262473 = ORIENTED_EDGE('',*,*,#262474,.F.); +#262474 = EDGE_CURVE('',#262436,#262467,#262475,.T.); +#262475 = LINE('',#262476,#262477); +#262476 = CARTESIAN_POINT('',(130.901921,-119.419561,0.)); +#262477 = VECTOR('',#262478,1.); +#262478 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262479 = PLANE('',#262480); +#262480 = AXIS2_PLACEMENT_3D('',#262481,#262482,#262483); +#262481 = CARTESIAN_POINT('',(130.901921,-119.419561,0.)); +#262482 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#262483 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#262484 = ADVANCED_FACE('',(#262485),#262501,.F.); +#262485 = FACE_BOUND('',#262486,.F.); +#262486 = EDGE_LOOP('',(#262487,#262488,#262494,#262495)); +#262487 = ORIENTED_EDGE('',*,*,#262466,.T.); +#262488 = ORIENTED_EDGE('',*,*,#262489,.T.); +#262489 = EDGE_CURVE('',#262459,#261455,#262490,.T.); +#262490 = LINE('',#262491,#262492); +#262491 = CARTESIAN_POINT('',(130.916853,-119.383513,-3.5E-02)); +#262492 = VECTOR('',#262493,1.); +#262493 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262494 = ORIENTED_EDGE('',*,*,#261452,.F.); +#262495 = ORIENTED_EDGE('',*,*,#262496,.F.); +#262496 = EDGE_CURVE('',#262467,#261453,#262497,.T.); +#262497 = LINE('',#262498,#262499); +#262498 = CARTESIAN_POINT('',(130.916853,-119.383513,0.)); +#262499 = VECTOR('',#262500,1.); +#262500 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262501 = PLANE('',#262502); +#262502 = AXIS2_PLACEMENT_3D('',#262503,#262504,#262505); +#262503 = CARTESIAN_POINT('',(130.916853,-119.383513,0.)); +#262504 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#262505 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262506 = ADVANCED_FACE('',(#262507),#262543,.F.); +#262507 = FACE_BOUND('',#262508,.F.); +#262508 = EDGE_LOOP('',(#262509,#262510,#262511,#262512,#262513,#262514, + #262515,#262516,#262517,#262518,#262519,#262520,#262521,#262522, + #262523,#262524,#262525,#262526,#262527,#262528,#262529,#262530, + #262531,#262532,#262533,#262534,#262535,#262536,#262537,#262538, + #262539,#262540,#262541,#262542)); +#262509 = ORIENTED_EDGE('',*,*,#261478,.T.); +#262510 = ORIENTED_EDGE('',*,*,#261509,.T.); +#262511 = ORIENTED_EDGE('',*,*,#261541,.T.); +#262512 = ORIENTED_EDGE('',*,*,#261573,.T.); +#262513 = ORIENTED_EDGE('',*,*,#261604,.T.); +#262514 = ORIENTED_EDGE('',*,*,#261635,.T.); +#262515 = ORIENTED_EDGE('',*,*,#261666,.T.); +#262516 = ORIENTED_EDGE('',*,*,#261697,.T.); +#262517 = ORIENTED_EDGE('',*,*,#261728,.T.); +#262518 = ORIENTED_EDGE('',*,*,#261759,.T.); +#262519 = ORIENTED_EDGE('',*,*,#261790,.T.); +#262520 = ORIENTED_EDGE('',*,*,#261821,.T.); +#262521 = ORIENTED_EDGE('',*,*,#261852,.T.); +#262522 = ORIENTED_EDGE('',*,*,#261883,.T.); +#262523 = ORIENTED_EDGE('',*,*,#261914,.T.); +#262524 = ORIENTED_EDGE('',*,*,#261945,.T.); +#262525 = ORIENTED_EDGE('',*,*,#261976,.T.); +#262526 = ORIENTED_EDGE('',*,*,#262007,.T.); +#262527 = ORIENTED_EDGE('',*,*,#262038,.T.); +#262528 = ORIENTED_EDGE('',*,*,#262070,.T.); +#262529 = ORIENTED_EDGE('',*,*,#262102,.T.); +#262530 = ORIENTED_EDGE('',*,*,#262133,.T.); +#262531 = ORIENTED_EDGE('',*,*,#262164,.T.); +#262532 = ORIENTED_EDGE('',*,*,#262195,.T.); +#262533 = ORIENTED_EDGE('',*,*,#262226,.T.); +#262534 = ORIENTED_EDGE('',*,*,#262257,.T.); +#262535 = ORIENTED_EDGE('',*,*,#262288,.T.); +#262536 = ORIENTED_EDGE('',*,*,#262319,.T.); +#262537 = ORIENTED_EDGE('',*,*,#262350,.T.); +#262538 = ORIENTED_EDGE('',*,*,#262381,.T.); +#262539 = ORIENTED_EDGE('',*,*,#262412,.T.); +#262540 = ORIENTED_EDGE('',*,*,#262443,.T.); +#262541 = ORIENTED_EDGE('',*,*,#262474,.T.); +#262542 = ORIENTED_EDGE('',*,*,#262496,.T.); +#262543 = PLANE('',#262544); +#262544 = AXIS2_PLACEMENT_3D('',#262545,#262546,#262547); +#262545 = CARTESIAN_POINT('',(0.,0.,0.)); +#262546 = DIRECTION('',(-0.,-0.,-1.)); +#262547 = DIRECTION('',(-1.,0.,0.)); +#262548 = ADVANCED_FACE('',(#262549),#262585,.T.); +#262549 = FACE_BOUND('',#262550,.T.); +#262550 = EDGE_LOOP('',(#262551,#262552,#262553,#262554,#262555,#262556, + #262557,#262558,#262559,#262560,#262561,#262562,#262563,#262564, + #262565,#262566,#262567,#262568,#262569,#262570,#262571,#262572, + #262573,#262574,#262575,#262576,#262577,#262578,#262579,#262580, + #262581,#262582,#262583,#262584)); +#262551 = ORIENTED_EDGE('',*,*,#261462,.T.); +#262552 = ORIENTED_EDGE('',*,*,#261493,.T.); +#262553 = ORIENTED_EDGE('',*,*,#261524,.T.); +#262554 = ORIENTED_EDGE('',*,*,#261557,.T.); +#262555 = ORIENTED_EDGE('',*,*,#261588,.T.); +#262556 = ORIENTED_EDGE('',*,*,#261619,.T.); +#262557 = ORIENTED_EDGE('',*,*,#261650,.T.); +#262558 = ORIENTED_EDGE('',*,*,#261681,.T.); +#262559 = ORIENTED_EDGE('',*,*,#261712,.T.); +#262560 = ORIENTED_EDGE('',*,*,#261743,.T.); +#262561 = ORIENTED_EDGE('',*,*,#261774,.T.); +#262562 = ORIENTED_EDGE('',*,*,#261805,.T.); +#262563 = ORIENTED_EDGE('',*,*,#261836,.T.); +#262564 = ORIENTED_EDGE('',*,*,#261867,.T.); +#262565 = ORIENTED_EDGE('',*,*,#261898,.T.); +#262566 = ORIENTED_EDGE('',*,*,#261929,.T.); +#262567 = ORIENTED_EDGE('',*,*,#261960,.T.); +#262568 = ORIENTED_EDGE('',*,*,#261991,.T.); +#262569 = ORIENTED_EDGE('',*,*,#262022,.T.); +#262570 = ORIENTED_EDGE('',*,*,#262053,.T.); +#262571 = ORIENTED_EDGE('',*,*,#262086,.T.); +#262572 = ORIENTED_EDGE('',*,*,#262117,.T.); +#262573 = ORIENTED_EDGE('',*,*,#262148,.T.); +#262574 = ORIENTED_EDGE('',*,*,#262179,.T.); +#262575 = ORIENTED_EDGE('',*,*,#262210,.T.); +#262576 = ORIENTED_EDGE('',*,*,#262241,.T.); +#262577 = ORIENTED_EDGE('',*,*,#262272,.T.); +#262578 = ORIENTED_EDGE('',*,*,#262303,.T.); +#262579 = ORIENTED_EDGE('',*,*,#262334,.T.); +#262580 = ORIENTED_EDGE('',*,*,#262365,.T.); +#262581 = ORIENTED_EDGE('',*,*,#262396,.T.); +#262582 = ORIENTED_EDGE('',*,*,#262427,.T.); +#262583 = ORIENTED_EDGE('',*,*,#262458,.T.); +#262584 = ORIENTED_EDGE('',*,*,#262489,.T.); +#262585 = PLANE('',#262586); +#262586 = AXIS2_PLACEMENT_3D('',#262587,#262588,#262589); +#262587 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#262588 = DIRECTION('',(-0.,-0.,-1.)); +#262589 = DIRECTION('',(-1.,0.,0.)); +#262590 = MANIFOLD_SOLID_BREP('',#262591); +#262591 = CLOSED_SHELL('',(#262592,#262634,#262665,#262696,#262727, + #262758,#262789,#262820,#262853,#262884,#262915,#262946,#262977, + #263008,#263039,#263061,#263084)); +#262592 = ADVANCED_FACE('',(#262593),#262629,.T.); +#262593 = FACE_BOUND('',#262594,.F.); +#262594 = EDGE_LOOP('',(#262595,#262605,#262614,#262622)); +#262595 = ORIENTED_EDGE('',*,*,#262596,.T.); +#262596 = EDGE_CURVE('',#262597,#262599,#262601,.T.); +#262597 = VERTEX_POINT('',#262598); +#262598 = CARTESIAN_POINT('',(131.894443,-119.716853,0.)); +#262599 = VERTEX_POINT('',#262600); +#262600 = CARTESIAN_POINT('',(131.894443,-119.716853,-3.5E-02)); +#262601 = LINE('',#262602,#262603); +#262602 = CARTESIAN_POINT('',(131.894443,-119.716853,0.)); +#262603 = VECTOR('',#262604,1.); +#262604 = DIRECTION('',(0.,0.,-1.)); +#262605 = ORIENTED_EDGE('',*,*,#262606,.T.); +#262606 = EDGE_CURVE('',#262599,#262607,#262609,.T.); +#262607 = VERTEX_POINT('',#262608); +#262608 = CARTESIAN_POINT('',(132.048079,-119.780491,-3.5E-02)); +#262609 = CIRCLE('',#262610,0.100000590676); +#262610 = AXIS2_PLACEMENT_3D('',#262611,#262612,#262613); +#262611 = CARTESIAN_POINT('',(131.95,-119.8000006871,-3.5E-02)); +#262612 = DIRECTION('',(0.,0.,-1.)); +#262613 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#262614 = ORIENTED_EDGE('',*,*,#262615,.F.); +#262615 = EDGE_CURVE('',#262616,#262607,#262618,.T.); +#262616 = VERTEX_POINT('',#262617); +#262617 = CARTESIAN_POINT('',(132.048079,-119.780491,0.)); +#262618 = LINE('',#262619,#262620); +#262619 = CARTESIAN_POINT('',(132.048079,-119.780491,0.)); +#262620 = VECTOR('',#262621,1.); +#262621 = DIRECTION('',(0.,0.,-1.)); +#262622 = ORIENTED_EDGE('',*,*,#262623,.F.); +#262623 = EDGE_CURVE('',#262597,#262616,#262624,.T.); +#262624 = CIRCLE('',#262625,0.100000590676); +#262625 = AXIS2_PLACEMENT_3D('',#262626,#262627,#262628); +#262626 = CARTESIAN_POINT('',(131.95,-119.8000006871,0.)); +#262627 = DIRECTION('',(0.,0.,-1.)); +#262628 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#262629 = CYLINDRICAL_SURFACE('',#262630,0.100000590676); +#262630 = AXIS2_PLACEMENT_3D('',#262631,#262632,#262633); +#262631 = CARTESIAN_POINT('',(131.95,-119.8000006871,0.)); +#262632 = DIRECTION('',(-0.,-0.,1.)); +#262633 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#262634 = ADVANCED_FACE('',(#262635),#262660,.F.); +#262635 = FACE_BOUND('',#262636,.F.); +#262636 = EDGE_LOOP('',(#262637,#262638,#262646,#262654)); +#262637 = ORIENTED_EDGE('',*,*,#262615,.T.); +#262638 = ORIENTED_EDGE('',*,*,#262639,.T.); +#262639 = EDGE_CURVE('',#262607,#262640,#262642,.T.); +#262640 = VERTEX_POINT('',#262641); +#262641 = CARTESIAN_POINT('',(132.048079,-120.569509,-3.5E-02)); +#262642 = LINE('',#262643,#262644); +#262643 = CARTESIAN_POINT('',(132.048079,-119.780491,-3.5E-02)); +#262644 = VECTOR('',#262645,1.); +#262645 = DIRECTION('',(0.,-1.,0.)); +#262646 = ORIENTED_EDGE('',*,*,#262647,.F.); +#262647 = EDGE_CURVE('',#262648,#262640,#262650,.T.); +#262648 = VERTEX_POINT('',#262649); +#262649 = CARTESIAN_POINT('',(132.048079,-120.569509,0.)); +#262650 = LINE('',#262651,#262652); +#262651 = CARTESIAN_POINT('',(132.048079,-120.569509,0.)); +#262652 = VECTOR('',#262653,1.); +#262653 = DIRECTION('',(0.,0.,-1.)); +#262654 = ORIENTED_EDGE('',*,*,#262655,.F.); +#262655 = EDGE_CURVE('',#262616,#262648,#262656,.T.); +#262656 = LINE('',#262657,#262658); +#262657 = CARTESIAN_POINT('',(132.048079,-119.780491,0.)); +#262658 = VECTOR('',#262659,1.); +#262659 = DIRECTION('',(0.,-1.,0.)); +#262660 = PLANE('',#262661); +#262661 = AXIS2_PLACEMENT_3D('',#262662,#262663,#262664); +#262662 = CARTESIAN_POINT('',(132.048079,-119.780491,0.)); +#262663 = DIRECTION('',(-1.,-0.,-0.)); +#262664 = DIRECTION('',(0.,-1.,0.)); +#262665 = ADVANCED_FACE('',(#262666),#262691,.F.); +#262666 = FACE_BOUND('',#262667,.F.); +#262667 = EDGE_LOOP('',(#262668,#262669,#262677,#262685)); +#262668 = ORIENTED_EDGE('',*,*,#262647,.T.); +#262669 = ORIENTED_EDGE('',*,*,#262670,.T.); +#262670 = EDGE_CURVE('',#262640,#262671,#262673,.T.); +#262671 = VERTEX_POINT('',#262672); +#262672 = CARTESIAN_POINT('',(132.033147,-120.605557,-3.5E-02)); +#262673 = LINE('',#262674,#262675); +#262674 = CARTESIAN_POINT('',(132.048079,-120.569509,-3.5E-02)); +#262675 = VECTOR('',#262676,1.); +#262676 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#262677 = ORIENTED_EDGE('',*,*,#262678,.F.); +#262678 = EDGE_CURVE('',#262679,#262671,#262681,.T.); +#262679 = VERTEX_POINT('',#262680); +#262680 = CARTESIAN_POINT('',(132.033147,-120.605557,0.)); +#262681 = LINE('',#262682,#262683); +#262682 = CARTESIAN_POINT('',(132.033147,-120.605557,0.)); +#262683 = VECTOR('',#262684,1.); +#262684 = DIRECTION('',(0.,0.,-1.)); +#262685 = ORIENTED_EDGE('',*,*,#262686,.F.); +#262686 = EDGE_CURVE('',#262648,#262679,#262687,.T.); +#262687 = LINE('',#262688,#262689); +#262688 = CARTESIAN_POINT('',(132.048079,-120.569509,0.)); +#262689 = VECTOR('',#262690,1.); +#262690 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#262691 = PLANE('',#262692); +#262692 = AXIS2_PLACEMENT_3D('',#262693,#262694,#262695); +#262693 = CARTESIAN_POINT('',(132.048079,-120.569509,0.)); +#262694 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#262695 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#262696 = ADVANCED_FACE('',(#262697),#262722,.F.); +#262697 = FACE_BOUND('',#262698,.F.); +#262698 = EDGE_LOOP('',(#262699,#262700,#262708,#262716)); +#262699 = ORIENTED_EDGE('',*,*,#262678,.T.); +#262700 = ORIENTED_EDGE('',*,*,#262701,.T.); +#262701 = EDGE_CURVE('',#262671,#262702,#262704,.T.); +#262702 = VERTEX_POINT('',#262703); +#262703 = CARTESIAN_POINT('',(129.055557,-123.583147,-3.5E-02)); +#262704 = LINE('',#262705,#262706); +#262705 = CARTESIAN_POINT('',(132.033147,-120.605557,-3.5E-02)); +#262706 = VECTOR('',#262707,1.); +#262707 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#262708 = ORIENTED_EDGE('',*,*,#262709,.F.); +#262709 = EDGE_CURVE('',#262710,#262702,#262712,.T.); +#262710 = VERTEX_POINT('',#262711); +#262711 = CARTESIAN_POINT('',(129.055557,-123.583147,0.)); +#262712 = LINE('',#262713,#262714); +#262713 = CARTESIAN_POINT('',(129.055557,-123.583147,0.)); +#262714 = VECTOR('',#262715,1.); +#262715 = DIRECTION('',(0.,0.,-1.)); +#262716 = ORIENTED_EDGE('',*,*,#262717,.F.); +#262717 = EDGE_CURVE('',#262679,#262710,#262718,.T.); +#262718 = LINE('',#262719,#262720); +#262719 = CARTESIAN_POINT('',(132.033147,-120.605557,0.)); +#262720 = VECTOR('',#262721,1.); +#262721 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#262722 = PLANE('',#262723); +#262723 = AXIS2_PLACEMENT_3D('',#262724,#262725,#262726); +#262724 = CARTESIAN_POINT('',(132.033147,-120.605557,0.)); +#262725 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#262726 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#262727 = ADVANCED_FACE('',(#262728),#262753,.F.); +#262728 = FACE_BOUND('',#262729,.F.); +#262729 = EDGE_LOOP('',(#262730,#262731,#262739,#262747)); +#262730 = ORIENTED_EDGE('',*,*,#262709,.T.); +#262731 = ORIENTED_EDGE('',*,*,#262732,.T.); +#262732 = EDGE_CURVE('',#262702,#262733,#262735,.T.); +#262733 = VERTEX_POINT('',#262734); +#262734 = CARTESIAN_POINT('',(129.019509,-123.598079,-3.5E-02)); +#262735 = LINE('',#262736,#262737); +#262736 = CARTESIAN_POINT('',(129.055557,-123.583147,-3.5E-02)); +#262737 = VECTOR('',#262738,1.); +#262738 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#262739 = ORIENTED_EDGE('',*,*,#262740,.F.); +#262740 = EDGE_CURVE('',#262741,#262733,#262743,.T.); +#262741 = VERTEX_POINT('',#262742); +#262742 = CARTESIAN_POINT('',(129.019509,-123.598079,0.)); +#262743 = LINE('',#262744,#262745); +#262744 = CARTESIAN_POINT('',(129.019509,-123.598079,0.)); +#262745 = VECTOR('',#262746,1.); +#262746 = DIRECTION('',(0.,0.,-1.)); +#262747 = ORIENTED_EDGE('',*,*,#262748,.F.); +#262748 = EDGE_CURVE('',#262710,#262741,#262749,.T.); +#262749 = LINE('',#262750,#262751); +#262750 = CARTESIAN_POINT('',(129.055557,-123.583147,0.)); +#262751 = VECTOR('',#262752,1.); +#262752 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#262753 = PLANE('',#262754); +#262754 = AXIS2_PLACEMENT_3D('',#262755,#262756,#262757); +#262755 = CARTESIAN_POINT('',(129.055557,-123.583147,0.)); +#262756 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#262757 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#262758 = ADVANCED_FACE('',(#262759),#262784,.F.); +#262759 = FACE_BOUND('',#262760,.F.); +#262760 = EDGE_LOOP('',(#262761,#262762,#262770,#262778)); +#262761 = ORIENTED_EDGE('',*,*,#262740,.T.); +#262762 = ORIENTED_EDGE('',*,*,#262763,.T.); +#262763 = EDGE_CURVE('',#262733,#262764,#262766,.T.); +#262764 = VERTEX_POINT('',#262765); +#262765 = CARTESIAN_POINT('',(126.561422,-123.6,-3.5E-02)); +#262766 = LINE('',#262767,#262768); +#262767 = CARTESIAN_POINT('',(129.019509,-123.598079,-3.5E-02)); +#262768 = VECTOR('',#262769,1.); +#262769 = DIRECTION('',(-0.999999694627,-7.815017993159E-04,0.)); +#262770 = ORIENTED_EDGE('',*,*,#262771,.F.); +#262771 = EDGE_CURVE('',#262772,#262764,#262774,.T.); +#262772 = VERTEX_POINT('',#262773); +#262773 = CARTESIAN_POINT('',(126.561422,-123.6,0.)); +#262774 = LINE('',#262775,#262776); +#262775 = CARTESIAN_POINT('',(126.561422,-123.6,0.)); +#262776 = VECTOR('',#262777,1.); +#262777 = DIRECTION('',(0.,0.,-1.)); +#262778 = ORIENTED_EDGE('',*,*,#262779,.F.); +#262779 = EDGE_CURVE('',#262741,#262772,#262780,.T.); +#262780 = LINE('',#262781,#262782); +#262781 = CARTESIAN_POINT('',(129.019509,-123.598079,0.)); +#262782 = VECTOR('',#262783,1.); +#262783 = DIRECTION('',(-0.999999694627,-7.815017993159E-04,0.)); +#262784 = PLANE('',#262785); +#262785 = AXIS2_PLACEMENT_3D('',#262786,#262787,#262788); +#262786 = CARTESIAN_POINT('',(129.019509,-123.598079,0.)); +#262787 = DIRECTION('',(-7.815017993159E-04,0.999999694627,0.)); +#262788 = DIRECTION('',(-0.999999694627,-7.815017993159E-04,0.)); +#262789 = ADVANCED_FACE('',(#262790),#262815,.F.); +#262790 = FACE_BOUND('',#262791,.F.); +#262791 = EDGE_LOOP('',(#262792,#262793,#262801,#262809)); +#262792 = ORIENTED_EDGE('',*,*,#262771,.T.); +#262793 = ORIENTED_EDGE('',*,*,#262794,.T.); +#262794 = EDGE_CURVE('',#262764,#262795,#262797,.T.); +#262795 = VERTEX_POINT('',#262796); +#262796 = CARTESIAN_POINT('',(126.075557,-124.083147,-3.5E-02)); +#262797 = LINE('',#262798,#262799); +#262798 = CARTESIAN_POINT('',(126.561422,-123.6,-3.5E-02)); +#262799 = VECTOR('',#262800,1.); +#262800 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#262801 = ORIENTED_EDGE('',*,*,#262802,.F.); +#262802 = EDGE_CURVE('',#262803,#262795,#262805,.T.); +#262803 = VERTEX_POINT('',#262804); +#262804 = CARTESIAN_POINT('',(126.075557,-124.083147,0.)); +#262805 = LINE('',#262806,#262807); +#262806 = CARTESIAN_POINT('',(126.075557,-124.083147,0.)); +#262807 = VECTOR('',#262808,1.); +#262808 = DIRECTION('',(0.,0.,-1.)); +#262809 = ORIENTED_EDGE('',*,*,#262810,.F.); +#262810 = EDGE_CURVE('',#262772,#262803,#262811,.T.); +#262811 = LINE('',#262812,#262813); +#262812 = CARTESIAN_POINT('',(126.561422,-123.6,0.)); +#262813 = VECTOR('',#262814,1.); +#262814 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#262815 = PLANE('',#262816); +#262816 = AXIS2_PLACEMENT_3D('',#262817,#262818,#262819); +#262817 = CARTESIAN_POINT('',(126.561422,-123.6,0.)); +#262818 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#262819 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#262820 = ADVANCED_FACE('',(#262821),#262848,.T.); +#262821 = FACE_BOUND('',#262822,.F.); +#262822 = EDGE_LOOP('',(#262823,#262824,#262833,#262841)); +#262823 = ORIENTED_EDGE('',*,*,#262802,.T.); +#262824 = ORIENTED_EDGE('',*,*,#262825,.T.); +#262825 = EDGE_CURVE('',#262795,#262826,#262828,.T.); +#262826 = VERTEX_POINT('',#262827); +#262827 = CARTESIAN_POINT('',(125.936853,-123.944443,-3.5E-02)); +#262828 = CIRCLE('',#262829,0.10000001929); +#262829 = AXIS2_PLACEMENT_3D('',#262830,#262831,#262832); +#262830 = CARTESIAN_POINT('',(126.02,-124.,-3.5E-02)); +#262831 = DIRECTION('',(0.,0.,-1.)); +#262832 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#262833 = ORIENTED_EDGE('',*,*,#262834,.F.); +#262834 = EDGE_CURVE('',#262835,#262826,#262837,.T.); +#262835 = VERTEX_POINT('',#262836); +#262836 = CARTESIAN_POINT('',(125.936853,-123.944443,0.)); +#262837 = LINE('',#262838,#262839); +#262838 = CARTESIAN_POINT('',(125.936853,-123.944443,0.)); +#262839 = VECTOR('',#262840,1.); +#262840 = DIRECTION('',(0.,0.,-1.)); +#262841 = ORIENTED_EDGE('',*,*,#262842,.F.); +#262842 = EDGE_CURVE('',#262803,#262835,#262843,.T.); +#262843 = CIRCLE('',#262844,0.10000001929); +#262844 = AXIS2_PLACEMENT_3D('',#262845,#262846,#262847); +#262845 = CARTESIAN_POINT('',(126.02,-124.,0.)); +#262846 = DIRECTION('',(0.,0.,-1.)); +#262847 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#262848 = CYLINDRICAL_SURFACE('',#262849,0.10000001929); +#262849 = AXIS2_PLACEMENT_3D('',#262850,#262851,#262852); +#262850 = CARTESIAN_POINT('',(126.02,-124.,0.)); +#262851 = DIRECTION('',(-0.,-0.,1.)); +#262852 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#262853 = ADVANCED_FACE('',(#262854),#262879,.F.); +#262854 = FACE_BOUND('',#262855,.F.); +#262855 = EDGE_LOOP('',(#262856,#262857,#262865,#262873)); +#262856 = ORIENTED_EDGE('',*,*,#262834,.T.); +#262857 = ORIENTED_EDGE('',*,*,#262858,.T.); +#262858 = EDGE_CURVE('',#262826,#262859,#262861,.T.); +#262859 = VERTEX_POINT('',#262860); +#262860 = CARTESIAN_POINT('',(126.464443,-123.416853,-3.5E-02)); +#262861 = LINE('',#262862,#262863); +#262862 = CARTESIAN_POINT('',(125.936853,-123.944443,-3.5E-02)); +#262863 = VECTOR('',#262864,1.); +#262864 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262865 = ORIENTED_EDGE('',*,*,#262866,.F.); +#262866 = EDGE_CURVE('',#262867,#262859,#262869,.T.); +#262867 = VERTEX_POINT('',#262868); +#262868 = CARTESIAN_POINT('',(126.464443,-123.416853,0.)); +#262869 = LINE('',#262870,#262871); +#262870 = CARTESIAN_POINT('',(126.464443,-123.416853,0.)); +#262871 = VECTOR('',#262872,1.); +#262872 = DIRECTION('',(0.,0.,-1.)); +#262873 = ORIENTED_EDGE('',*,*,#262874,.F.); +#262874 = EDGE_CURVE('',#262835,#262867,#262875,.T.); +#262875 = LINE('',#262876,#262877); +#262876 = CARTESIAN_POINT('',(125.936853,-123.944443,0.)); +#262877 = VECTOR('',#262878,1.); +#262878 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262879 = PLANE('',#262880); +#262880 = AXIS2_PLACEMENT_3D('',#262881,#262882,#262883); +#262881 = CARTESIAN_POINT('',(125.936853,-123.944443,0.)); +#262882 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#262883 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262884 = ADVANCED_FACE('',(#262885),#262910,.F.); +#262885 = FACE_BOUND('',#262886,.F.); +#262886 = EDGE_LOOP('',(#262887,#262888,#262896,#262904)); +#262887 = ORIENTED_EDGE('',*,*,#262866,.T.); +#262888 = ORIENTED_EDGE('',*,*,#262889,.T.); +#262889 = EDGE_CURVE('',#262859,#262890,#262892,.T.); +#262890 = VERTEX_POINT('',#262891); +#262891 = CARTESIAN_POINT('',(126.500491,-123.401921,-3.5E-02)); +#262892 = LINE('',#262893,#262894); +#262893 = CARTESIAN_POINT('',(126.464443,-123.416853,-3.5E-02)); +#262894 = VECTOR('',#262895,1.); +#262895 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262896 = ORIENTED_EDGE('',*,*,#262897,.F.); +#262897 = EDGE_CURVE('',#262898,#262890,#262900,.T.); +#262898 = VERTEX_POINT('',#262899); +#262899 = CARTESIAN_POINT('',(126.500491,-123.401921,0.)); +#262900 = LINE('',#262901,#262902); +#262901 = CARTESIAN_POINT('',(126.500491,-123.401921,0.)); +#262902 = VECTOR('',#262903,1.); +#262903 = DIRECTION('',(0.,0.,-1.)); +#262904 = ORIENTED_EDGE('',*,*,#262905,.F.); +#262905 = EDGE_CURVE('',#262867,#262898,#262906,.T.); +#262906 = LINE('',#262907,#262908); +#262907 = CARTESIAN_POINT('',(126.464443,-123.416853,0.)); +#262908 = VECTOR('',#262909,1.); +#262909 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262910 = PLANE('',#262911); +#262911 = AXIS2_PLACEMENT_3D('',#262912,#262913,#262914); +#262912 = CARTESIAN_POINT('',(126.464443,-123.416853,0.)); +#262913 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#262914 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#262915 = ADVANCED_FACE('',(#262916),#262941,.F.); +#262916 = FACE_BOUND('',#262917,.F.); +#262917 = EDGE_LOOP('',(#262918,#262919,#262927,#262935)); +#262918 = ORIENTED_EDGE('',*,*,#262897,.T.); +#262919 = ORIENTED_EDGE('',*,*,#262920,.T.); +#262920 = EDGE_CURVE('',#262890,#262921,#262923,.T.); +#262921 = VERTEX_POINT('',#262922); +#262922 = CARTESIAN_POINT('',(128.958578,-123.4,-3.5E-02)); +#262923 = LINE('',#262924,#262925); +#262924 = CARTESIAN_POINT('',(126.500491,-123.401921,-3.5E-02)); +#262925 = VECTOR('',#262926,1.); +#262926 = DIRECTION('',(0.999999694627,7.815017993159E-04,0.)); +#262927 = ORIENTED_EDGE('',*,*,#262928,.F.); +#262928 = EDGE_CURVE('',#262929,#262921,#262931,.T.); +#262929 = VERTEX_POINT('',#262930); +#262930 = CARTESIAN_POINT('',(128.958578,-123.4,0.)); +#262931 = LINE('',#262932,#262933); +#262932 = CARTESIAN_POINT('',(128.958578,-123.4,0.)); +#262933 = VECTOR('',#262934,1.); +#262934 = DIRECTION('',(0.,0.,-1.)); +#262935 = ORIENTED_EDGE('',*,*,#262936,.F.); +#262936 = EDGE_CURVE('',#262898,#262929,#262937,.T.); +#262937 = LINE('',#262938,#262939); +#262938 = CARTESIAN_POINT('',(126.500491,-123.401921,0.)); +#262939 = VECTOR('',#262940,1.); +#262940 = DIRECTION('',(0.999999694627,7.815017993159E-04,0.)); +#262941 = PLANE('',#262942); +#262942 = AXIS2_PLACEMENT_3D('',#262943,#262944,#262945); +#262943 = CARTESIAN_POINT('',(126.500491,-123.401921,0.)); +#262944 = DIRECTION('',(7.815017993159E-04,-0.999999694627,0.)); +#262945 = DIRECTION('',(0.999999694627,7.815017993159E-04,0.)); +#262946 = ADVANCED_FACE('',(#262947),#262972,.F.); +#262947 = FACE_BOUND('',#262948,.F.); +#262948 = EDGE_LOOP('',(#262949,#262950,#262958,#262966)); +#262949 = ORIENTED_EDGE('',*,*,#262928,.T.); +#262950 = ORIENTED_EDGE('',*,*,#262951,.T.); +#262951 = EDGE_CURVE('',#262921,#262952,#262954,.T.); +#262952 = VERTEX_POINT('',#262953); +#262953 = CARTESIAN_POINT('',(131.85,-120.508578,-3.5E-02)); +#262954 = LINE('',#262955,#262956); +#262955 = CARTESIAN_POINT('',(128.958578,-123.4,-3.5E-02)); +#262956 = VECTOR('',#262957,1.); +#262957 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262958 = ORIENTED_EDGE('',*,*,#262959,.F.); +#262959 = EDGE_CURVE('',#262960,#262952,#262962,.T.); +#262960 = VERTEX_POINT('',#262961); +#262961 = CARTESIAN_POINT('',(131.85,-120.508578,0.)); +#262962 = LINE('',#262963,#262964); +#262963 = CARTESIAN_POINT('',(131.85,-120.508578,0.)); +#262964 = VECTOR('',#262965,1.); +#262965 = DIRECTION('',(0.,0.,-1.)); +#262966 = ORIENTED_EDGE('',*,*,#262967,.F.); +#262967 = EDGE_CURVE('',#262929,#262960,#262968,.T.); +#262968 = LINE('',#262969,#262970); +#262969 = CARTESIAN_POINT('',(128.958578,-123.4,0.)); +#262970 = VECTOR('',#262971,1.); +#262971 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262972 = PLANE('',#262973); +#262973 = AXIS2_PLACEMENT_3D('',#262974,#262975,#262976); +#262974 = CARTESIAN_POINT('',(128.958578,-123.4,0.)); +#262975 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#262976 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#262977 = ADVANCED_FACE('',(#262978),#263003,.F.); +#262978 = FACE_BOUND('',#262979,.F.); +#262979 = EDGE_LOOP('',(#262980,#262981,#262989,#262997)); +#262980 = ORIENTED_EDGE('',*,*,#262959,.T.); +#262981 = ORIENTED_EDGE('',*,*,#262982,.T.); +#262982 = EDGE_CURVE('',#262952,#262983,#262985,.T.); +#262983 = VERTEX_POINT('',#262984); +#262984 = CARTESIAN_POINT('',(131.851921,-119.780491,-3.5E-02)); +#262985 = LINE('',#262986,#262987); +#262986 = CARTESIAN_POINT('',(131.85,-120.508578,-3.5E-02)); +#262987 = VECTOR('',#262988,1.); +#262988 = DIRECTION('',(2.638411774623E-03,0.999996519386,0.)); +#262989 = ORIENTED_EDGE('',*,*,#262990,.F.); +#262990 = EDGE_CURVE('',#262991,#262983,#262993,.T.); +#262991 = VERTEX_POINT('',#262992); +#262992 = CARTESIAN_POINT('',(131.851921,-119.780491,0.)); +#262993 = LINE('',#262994,#262995); +#262994 = CARTESIAN_POINT('',(131.851921,-119.780491,0.)); +#262995 = VECTOR('',#262996,1.); +#262996 = DIRECTION('',(0.,0.,-1.)); +#262997 = ORIENTED_EDGE('',*,*,#262998,.F.); +#262998 = EDGE_CURVE('',#262960,#262991,#262999,.T.); +#262999 = LINE('',#263000,#263001); +#263000 = CARTESIAN_POINT('',(131.85,-120.508578,0.)); +#263001 = VECTOR('',#263002,1.); +#263002 = DIRECTION('',(2.638411774623E-03,0.999996519386,0.)); +#263003 = PLANE('',#263004); +#263004 = AXIS2_PLACEMENT_3D('',#263005,#263006,#263007); +#263005 = CARTESIAN_POINT('',(131.85,-120.508578,0.)); +#263006 = DIRECTION('',(0.999996519386,-2.638411774623E-03,0.)); +#263007 = DIRECTION('',(2.638411774623E-03,0.999996519386,0.)); +#263008 = ADVANCED_FACE('',(#263009),#263034,.F.); +#263009 = FACE_BOUND('',#263010,.F.); +#263010 = EDGE_LOOP('',(#263011,#263012,#263020,#263028)); +#263011 = ORIENTED_EDGE('',*,*,#262990,.T.); +#263012 = ORIENTED_EDGE('',*,*,#263013,.T.); +#263013 = EDGE_CURVE('',#262983,#263014,#263016,.T.); +#263014 = VERTEX_POINT('',#263015); +#263015 = CARTESIAN_POINT('',(131.866853,-119.744443,-3.5E-02)); +#263016 = LINE('',#263017,#263018); +#263017 = CARTESIAN_POINT('',(131.851921,-119.780491,-3.5E-02)); +#263018 = VECTOR('',#263019,1.); +#263019 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#263020 = ORIENTED_EDGE('',*,*,#263021,.F.); +#263021 = EDGE_CURVE('',#263022,#263014,#263024,.T.); +#263022 = VERTEX_POINT('',#263023); +#263023 = CARTESIAN_POINT('',(131.866853,-119.744443,0.)); +#263024 = LINE('',#263025,#263026); +#263025 = CARTESIAN_POINT('',(131.866853,-119.744443,0.)); +#263026 = VECTOR('',#263027,1.); +#263027 = DIRECTION('',(0.,0.,-1.)); +#263028 = ORIENTED_EDGE('',*,*,#263029,.F.); +#263029 = EDGE_CURVE('',#262991,#263022,#263030,.T.); +#263030 = LINE('',#263031,#263032); +#263031 = CARTESIAN_POINT('',(131.851921,-119.780491,0.)); +#263032 = VECTOR('',#263033,1.); +#263033 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#263034 = PLANE('',#263035); +#263035 = AXIS2_PLACEMENT_3D('',#263036,#263037,#263038); +#263036 = CARTESIAN_POINT('',(131.851921,-119.780491,0.)); +#263037 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#263038 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#263039 = ADVANCED_FACE('',(#263040),#263056,.F.); +#263040 = FACE_BOUND('',#263041,.F.); +#263041 = EDGE_LOOP('',(#263042,#263043,#263049,#263050)); +#263042 = ORIENTED_EDGE('',*,*,#263021,.T.); +#263043 = ORIENTED_EDGE('',*,*,#263044,.T.); +#263044 = EDGE_CURVE('',#263014,#262599,#263045,.T.); +#263045 = LINE('',#263046,#263047); +#263046 = CARTESIAN_POINT('',(131.866853,-119.744443,-3.5E-02)); +#263047 = VECTOR('',#263048,1.); +#263048 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263049 = ORIENTED_EDGE('',*,*,#262596,.F.); +#263050 = ORIENTED_EDGE('',*,*,#263051,.F.); +#263051 = EDGE_CURVE('',#263022,#262597,#263052,.T.); +#263052 = LINE('',#263053,#263054); +#263053 = CARTESIAN_POINT('',(131.866853,-119.744443,0.)); +#263054 = VECTOR('',#263055,1.); +#263055 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263056 = PLANE('',#263057); +#263057 = AXIS2_PLACEMENT_3D('',#263058,#263059,#263060); +#263058 = CARTESIAN_POINT('',(131.866853,-119.744443,0.)); +#263059 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#263060 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263061 = ADVANCED_FACE('',(#263062),#263079,.F.); +#263062 = FACE_BOUND('',#263063,.F.); +#263063 = EDGE_LOOP('',(#263064,#263065,#263066,#263067,#263068,#263069, + #263070,#263071,#263072,#263073,#263074,#263075,#263076,#263077, + #263078)); +#263064 = ORIENTED_EDGE('',*,*,#262623,.T.); +#263065 = ORIENTED_EDGE('',*,*,#262655,.T.); +#263066 = ORIENTED_EDGE('',*,*,#262686,.T.); +#263067 = ORIENTED_EDGE('',*,*,#262717,.T.); +#263068 = ORIENTED_EDGE('',*,*,#262748,.T.); +#263069 = ORIENTED_EDGE('',*,*,#262779,.T.); +#263070 = ORIENTED_EDGE('',*,*,#262810,.T.); +#263071 = ORIENTED_EDGE('',*,*,#262842,.T.); +#263072 = ORIENTED_EDGE('',*,*,#262874,.T.); +#263073 = ORIENTED_EDGE('',*,*,#262905,.T.); +#263074 = ORIENTED_EDGE('',*,*,#262936,.T.); +#263075 = ORIENTED_EDGE('',*,*,#262967,.T.); +#263076 = ORIENTED_EDGE('',*,*,#262998,.T.); +#263077 = ORIENTED_EDGE('',*,*,#263029,.T.); +#263078 = ORIENTED_EDGE('',*,*,#263051,.T.); +#263079 = PLANE('',#263080); +#263080 = AXIS2_PLACEMENT_3D('',#263081,#263082,#263083); +#263081 = CARTESIAN_POINT('',(0.,0.,0.)); +#263082 = DIRECTION('',(-0.,-0.,-1.)); +#263083 = DIRECTION('',(-1.,0.,0.)); +#263084 = ADVANCED_FACE('',(#263085),#263102,.T.); +#263085 = FACE_BOUND('',#263086,.T.); +#263086 = EDGE_LOOP('',(#263087,#263088,#263089,#263090,#263091,#263092, + #263093,#263094,#263095,#263096,#263097,#263098,#263099,#263100, + #263101)); +#263087 = ORIENTED_EDGE('',*,*,#262606,.T.); +#263088 = ORIENTED_EDGE('',*,*,#262639,.T.); +#263089 = ORIENTED_EDGE('',*,*,#262670,.T.); +#263090 = ORIENTED_EDGE('',*,*,#262701,.T.); +#263091 = ORIENTED_EDGE('',*,*,#262732,.T.); +#263092 = ORIENTED_EDGE('',*,*,#262763,.T.); +#263093 = ORIENTED_EDGE('',*,*,#262794,.T.); +#263094 = ORIENTED_EDGE('',*,*,#262825,.T.); +#263095 = ORIENTED_EDGE('',*,*,#262858,.T.); +#263096 = ORIENTED_EDGE('',*,*,#262889,.T.); +#263097 = ORIENTED_EDGE('',*,*,#262920,.T.); +#263098 = ORIENTED_EDGE('',*,*,#262951,.T.); +#263099 = ORIENTED_EDGE('',*,*,#262982,.T.); +#263100 = ORIENTED_EDGE('',*,*,#263013,.T.); +#263101 = ORIENTED_EDGE('',*,*,#263044,.T.); +#263102 = PLANE('',#263103); +#263103 = AXIS2_PLACEMENT_3D('',#263104,#263105,#263106); +#263104 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#263105 = DIRECTION('',(-0.,-0.,-1.)); +#263106 = DIRECTION('',(-1.,0.,0.)); +#263107 = MANIFOLD_SOLID_BREP('',#263108); +#263108 = CLOSED_SHELL('',(#263109,#263149,#263180,#263213,#263244, + #263275,#263306,#263337,#263368,#263399,#263430,#263461,#263492, + #263523,#263554,#263585,#263616,#263647,#263678,#263709,#263740, + #263773,#263804,#263835,#263866,#263897,#263928,#263959,#263990, + #264021,#264052,#264083,#264114,#264145,#264176,#264207,#264238, + #264260,#264305)); +#263109 = ADVANCED_FACE('',(#263110),#263144,.F.); +#263110 = FACE_BOUND('',#263111,.F.); +#263111 = EDGE_LOOP('',(#263112,#263122,#263130,#263138)); +#263112 = ORIENTED_EDGE('',*,*,#263113,.T.); +#263113 = EDGE_CURVE('',#263114,#263116,#263118,.T.); +#263114 = VERTEX_POINT('',#263115); +#263115 = CARTESIAN_POINT('',(131.549199,-119.316853,0.)); +#263116 = VERTEX_POINT('',#263117); +#263117 = CARTESIAN_POINT('',(131.549199,-119.316853,-3.5E-02)); +#263118 = LINE('',#263119,#263120); +#263119 = CARTESIAN_POINT('',(131.549199,-119.316853,0.)); +#263120 = VECTOR('',#263121,1.); +#263121 = DIRECTION('',(0.,0.,-1.)); +#263122 = ORIENTED_EDGE('',*,*,#263123,.T.); +#263123 = EDGE_CURVE('',#263116,#263124,#263126,.T.); +#263124 = VERTEX_POINT('',#263125); +#263125 = CARTESIAN_POINT('',(131.585247,-119.301921,-3.5E-02)); +#263126 = LINE('',#263127,#263128); +#263127 = CARTESIAN_POINT('',(131.549199,-119.316853,-3.5E-02)); +#263128 = VECTOR('',#263129,1.); +#263129 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263130 = ORIENTED_EDGE('',*,*,#263131,.F.); +#263131 = EDGE_CURVE('',#263132,#263124,#263134,.T.); +#263132 = VERTEX_POINT('',#263133); +#263133 = CARTESIAN_POINT('',(131.585247,-119.301921,0.)); +#263134 = LINE('',#263135,#263136); +#263135 = CARTESIAN_POINT('',(131.585247,-119.301921,0.)); +#263136 = VECTOR('',#263137,1.); +#263137 = DIRECTION('',(0.,0.,-1.)); +#263138 = ORIENTED_EDGE('',*,*,#263139,.F.); +#263139 = EDGE_CURVE('',#263114,#263132,#263140,.T.); +#263140 = LINE('',#263141,#263142); +#263141 = CARTESIAN_POINT('',(131.549199,-119.316853,0.)); +#263142 = VECTOR('',#263143,1.); +#263143 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263144 = PLANE('',#263145); +#263145 = AXIS2_PLACEMENT_3D('',#263146,#263147,#263148); +#263146 = CARTESIAN_POINT('',(131.549199,-119.316853,0.)); +#263147 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263148 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263149 = ADVANCED_FACE('',(#263150),#263175,.F.); +#263150 = FACE_BOUND('',#263151,.F.); +#263151 = EDGE_LOOP('',(#263152,#263153,#263161,#263169)); +#263152 = ORIENTED_EDGE('',*,*,#263131,.T.); +#263153 = ORIENTED_EDGE('',*,*,#263154,.T.); +#263154 = EDGE_CURVE('',#263124,#263155,#263157,.T.); +#263155 = VERTEX_POINT('',#263156); +#263156 = CARTESIAN_POINT('',(131.969509,-119.301921,-3.5E-02)); +#263157 = LINE('',#263158,#263159); +#263158 = CARTESIAN_POINT('',(131.585247,-119.301921,-3.5E-02)); +#263159 = VECTOR('',#263160,1.); +#263160 = DIRECTION('',(1.,0.,0.)); +#263161 = ORIENTED_EDGE('',*,*,#263162,.F.); +#263162 = EDGE_CURVE('',#263163,#263155,#263165,.T.); +#263163 = VERTEX_POINT('',#263164); +#263164 = CARTESIAN_POINT('',(131.969509,-119.301921,0.)); +#263165 = LINE('',#263166,#263167); +#263166 = CARTESIAN_POINT('',(131.969509,-119.301921,0.)); +#263167 = VECTOR('',#263168,1.); +#263168 = DIRECTION('',(0.,0.,-1.)); +#263169 = ORIENTED_EDGE('',*,*,#263170,.F.); +#263170 = EDGE_CURVE('',#263132,#263163,#263171,.T.); +#263171 = LINE('',#263172,#263173); +#263172 = CARTESIAN_POINT('',(131.585247,-119.301921,0.)); +#263173 = VECTOR('',#263174,1.); +#263174 = DIRECTION('',(1.,0.,0.)); +#263175 = PLANE('',#263176); +#263176 = AXIS2_PLACEMENT_3D('',#263177,#263178,#263179); +#263177 = CARTESIAN_POINT('',(131.585247,-119.301921,0.)); +#263178 = DIRECTION('',(0.,-1.,0.)); +#263179 = DIRECTION('',(1.,0.,0.)); +#263180 = ADVANCED_FACE('',(#263181),#263208,.T.); +#263181 = FACE_BOUND('',#263182,.F.); +#263182 = EDGE_LOOP('',(#263183,#263184,#263193,#263201)); +#263183 = ORIENTED_EDGE('',*,*,#263162,.T.); +#263184 = ORIENTED_EDGE('',*,*,#263185,.T.); +#263185 = EDGE_CURVE('',#263155,#263186,#263188,.T.); +#263186 = VERTEX_POINT('',#263187); +#263187 = CARTESIAN_POINT('',(131.969509,-119.498079,-3.5E-02)); +#263188 = CIRCLE('',#263189,0.100000456609); +#263189 = AXIS2_PLACEMENT_3D('',#263190,#263191,#263192); +#263190 = CARTESIAN_POINT('',(131.95,-119.4,-3.5E-02)); +#263191 = DIRECTION('',(0.,0.,-1.)); +#263192 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#263193 = ORIENTED_EDGE('',*,*,#263194,.F.); +#263194 = EDGE_CURVE('',#263195,#263186,#263197,.T.); +#263195 = VERTEX_POINT('',#263196); +#263196 = CARTESIAN_POINT('',(131.969509,-119.498079,0.)); +#263197 = LINE('',#263198,#263199); +#263198 = CARTESIAN_POINT('',(131.969509,-119.498079,0.)); +#263199 = VECTOR('',#263200,1.); +#263200 = DIRECTION('',(0.,0.,-1.)); +#263201 = ORIENTED_EDGE('',*,*,#263202,.F.); +#263202 = EDGE_CURVE('',#263163,#263195,#263203,.T.); +#263203 = CIRCLE('',#263204,0.100000456609); +#263204 = AXIS2_PLACEMENT_3D('',#263205,#263206,#263207); +#263205 = CARTESIAN_POINT('',(131.95,-119.4,0.)); +#263206 = DIRECTION('',(0.,0.,-1.)); +#263207 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#263208 = CYLINDRICAL_SURFACE('',#263209,0.100000456609); +#263209 = AXIS2_PLACEMENT_3D('',#263210,#263211,#263212); +#263210 = CARTESIAN_POINT('',(131.95,-119.4,0.)); +#263211 = DIRECTION('',(-0.,-0.,1.)); +#263212 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#263213 = ADVANCED_FACE('',(#263214),#263239,.F.); +#263214 = FACE_BOUND('',#263215,.F.); +#263215 = EDGE_LOOP('',(#263216,#263217,#263225,#263233)); +#263216 = ORIENTED_EDGE('',*,*,#263194,.T.); +#263217 = ORIENTED_EDGE('',*,*,#263218,.T.); +#263218 = EDGE_CURVE('',#263186,#263219,#263221,.T.); +#263219 = VERTEX_POINT('',#263220); +#263220 = CARTESIAN_POINT('',(131.646177,-119.5,-3.5E-02)); +#263221 = LINE('',#263222,#263223); +#263222 = CARTESIAN_POINT('',(131.969509,-119.498079,-3.5E-02)); +#263223 = VECTOR('',#263224,1.); +#263224 = DIRECTION('',(-0.999982351172,-5.941156757136E-03,0.)); +#263225 = ORIENTED_EDGE('',*,*,#263226,.F.); +#263226 = EDGE_CURVE('',#263227,#263219,#263229,.T.); +#263227 = VERTEX_POINT('',#263228); +#263228 = CARTESIAN_POINT('',(131.646177,-119.5,0.)); +#263229 = LINE('',#263230,#263231); +#263230 = CARTESIAN_POINT('',(131.646177,-119.5,0.)); +#263231 = VECTOR('',#263232,1.); +#263232 = DIRECTION('',(0.,0.,-1.)); +#263233 = ORIENTED_EDGE('',*,*,#263234,.F.); +#263234 = EDGE_CURVE('',#263195,#263227,#263235,.T.); +#263235 = LINE('',#263236,#263237); +#263236 = CARTESIAN_POINT('',(131.969509,-119.498079,0.)); +#263237 = VECTOR('',#263238,1.); +#263238 = DIRECTION('',(-0.999982351172,-5.941156757136E-03,0.)); +#263239 = PLANE('',#263240); +#263240 = AXIS2_PLACEMENT_3D('',#263241,#263242,#263243); +#263241 = CARTESIAN_POINT('',(131.969509,-119.498079,0.)); +#263242 = DIRECTION('',(-5.941156757136E-03,0.999982351172,0.)); +#263243 = DIRECTION('',(-0.999982351172,-5.941156757136E-03,0.)); +#263244 = ADVANCED_FACE('',(#263245),#263270,.F.); +#263245 = FACE_BOUND('',#263246,.F.); +#263246 = EDGE_LOOP('',(#263247,#263248,#263256,#263264)); +#263247 = ORIENTED_EDGE('',*,*,#263226,.T.); +#263248 = ORIENTED_EDGE('',*,*,#263249,.T.); +#263249 = EDGE_CURVE('',#263219,#263250,#263252,.T.); +#263250 = VERTEX_POINT('',#263251); +#263251 = CARTESIAN_POINT('',(131.5,-119.646177,-3.5E-02)); +#263252 = LINE('',#263253,#263254); +#263253 = CARTESIAN_POINT('',(131.646177,-119.5,-3.5E-02)); +#263254 = VECTOR('',#263255,1.); +#263255 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263256 = ORIENTED_EDGE('',*,*,#263257,.F.); +#263257 = EDGE_CURVE('',#263258,#263250,#263260,.T.); +#263258 = VERTEX_POINT('',#263259); +#263259 = CARTESIAN_POINT('',(131.5,-119.646177,0.)); +#263260 = LINE('',#263261,#263262); +#263261 = CARTESIAN_POINT('',(131.5,-119.646177,0.)); +#263262 = VECTOR('',#263263,1.); +#263263 = DIRECTION('',(0.,0.,-1.)); +#263264 = ORIENTED_EDGE('',*,*,#263265,.F.); +#263265 = EDGE_CURVE('',#263227,#263258,#263266,.T.); +#263266 = LINE('',#263267,#263268); +#263267 = CARTESIAN_POINT('',(131.646177,-119.5,0.)); +#263268 = VECTOR('',#263269,1.); +#263269 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263270 = PLANE('',#263271); +#263271 = AXIS2_PLACEMENT_3D('',#263272,#263273,#263274); +#263272 = CARTESIAN_POINT('',(131.646177,-119.5,0.)); +#263273 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#263274 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263275 = ADVANCED_FACE('',(#263276),#263301,.F.); +#263276 = FACE_BOUND('',#263277,.F.); +#263277 = EDGE_LOOP('',(#263278,#263279,#263287,#263295)); +#263278 = ORIENTED_EDGE('',*,*,#263257,.T.); +#263279 = ORIENTED_EDGE('',*,*,#263280,.T.); +#263280 = EDGE_CURVE('',#263250,#263281,#263283,.T.); +#263281 = VERTEX_POINT('',#263282); +#263282 = CARTESIAN_POINT('',(131.5,-119.953822,-3.5E-02)); +#263283 = LINE('',#263284,#263285); +#263284 = CARTESIAN_POINT('',(131.5,-119.646177,-3.5E-02)); +#263285 = VECTOR('',#263286,1.); +#263286 = DIRECTION('',(0.,-1.,0.)); +#263287 = ORIENTED_EDGE('',*,*,#263288,.F.); +#263288 = EDGE_CURVE('',#263289,#263281,#263291,.T.); +#263289 = VERTEX_POINT('',#263290); +#263290 = CARTESIAN_POINT('',(131.5,-119.953822,0.)); +#263291 = LINE('',#263292,#263293); +#263292 = CARTESIAN_POINT('',(131.5,-119.953822,0.)); +#263293 = VECTOR('',#263294,1.); +#263294 = DIRECTION('',(0.,0.,-1.)); +#263295 = ORIENTED_EDGE('',*,*,#263296,.F.); +#263296 = EDGE_CURVE('',#263258,#263289,#263297,.T.); +#263297 = LINE('',#263298,#263299); +#263298 = CARTESIAN_POINT('',(131.5,-119.646177,0.)); +#263299 = VECTOR('',#263300,1.); +#263300 = DIRECTION('',(0.,-1.,0.)); +#263301 = PLANE('',#263302); +#263302 = AXIS2_PLACEMENT_3D('',#263303,#263304,#263305); +#263303 = CARTESIAN_POINT('',(131.5,-119.646177,0.)); +#263304 = DIRECTION('',(-1.,-0.,-0.)); +#263305 = DIRECTION('',(0.,-1.,0.)); +#263306 = ADVANCED_FACE('',(#263307),#263332,.F.); +#263307 = FACE_BOUND('',#263308,.F.); +#263308 = EDGE_LOOP('',(#263309,#263310,#263318,#263326)); +#263309 = ORIENTED_EDGE('',*,*,#263288,.T.); +#263310 = ORIENTED_EDGE('',*,*,#263311,.T.); +#263311 = EDGE_CURVE('',#263281,#263312,#263314,.T.); +#263312 = VERTEX_POINT('',#263313); +#263313 = CARTESIAN_POINT('',(131.583147,-120.039687,-3.5E-02)); +#263314 = LINE('',#263315,#263316); +#263315 = CARTESIAN_POINT('',(131.5,-119.953822,-3.5E-02)); +#263316 = VECTOR('',#263317,1.); +#263317 = DIRECTION('',(0.695645354796,-0.718385370363,0.)); +#263318 = ORIENTED_EDGE('',*,*,#263319,.F.); +#263319 = EDGE_CURVE('',#263320,#263312,#263322,.T.); +#263320 = VERTEX_POINT('',#263321); +#263321 = CARTESIAN_POINT('',(131.583147,-120.039687,0.)); +#263322 = LINE('',#263323,#263324); +#263323 = CARTESIAN_POINT('',(131.583147,-120.039687,0.)); +#263324 = VECTOR('',#263325,1.); +#263325 = DIRECTION('',(0.,0.,-1.)); +#263326 = ORIENTED_EDGE('',*,*,#263327,.F.); +#263327 = EDGE_CURVE('',#263289,#263320,#263328,.T.); +#263328 = LINE('',#263329,#263330); +#263329 = CARTESIAN_POINT('',(131.5,-119.953822,0.)); +#263330 = VECTOR('',#263331,1.); +#263331 = DIRECTION('',(0.695645354796,-0.718385370363,0.)); +#263332 = PLANE('',#263333); +#263333 = AXIS2_PLACEMENT_3D('',#263334,#263335,#263336); +#263334 = CARTESIAN_POINT('',(131.5,-119.953822,0.)); +#263335 = DIRECTION('',(-0.718385370363,-0.695645354796,-0.)); +#263336 = DIRECTION('',(0.695645354796,-0.718385370363,0.)); +#263337 = ADVANCED_FACE('',(#263338),#263363,.F.); +#263338 = FACE_BOUND('',#263339,.F.); +#263339 = EDGE_LOOP('',(#263340,#263341,#263349,#263357)); +#263340 = ORIENTED_EDGE('',*,*,#263319,.T.); +#263341 = ORIENTED_EDGE('',*,*,#263342,.T.); +#263342 = EDGE_CURVE('',#263312,#263343,#263345,.T.); +#263343 = VERTEX_POINT('',#263344); +#263344 = CARTESIAN_POINT('',(131.598079,-120.075735,-3.5E-02)); +#263345 = LINE('',#263346,#263347); +#263346 = CARTESIAN_POINT('',(131.583147,-120.039687,-3.5E-02)); +#263347 = VECTOR('',#263348,1.); +#263348 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263349 = ORIENTED_EDGE('',*,*,#263350,.F.); +#263350 = EDGE_CURVE('',#263351,#263343,#263353,.T.); +#263351 = VERTEX_POINT('',#263352); +#263352 = CARTESIAN_POINT('',(131.598079,-120.075735,0.)); +#263353 = LINE('',#263354,#263355); +#263354 = CARTESIAN_POINT('',(131.598079,-120.075735,0.)); +#263355 = VECTOR('',#263356,1.); +#263356 = DIRECTION('',(0.,0.,-1.)); +#263357 = ORIENTED_EDGE('',*,*,#263358,.F.); +#263358 = EDGE_CURVE('',#263320,#263351,#263359,.T.); +#263359 = LINE('',#263360,#263361); +#263360 = CARTESIAN_POINT('',(131.583147,-120.039687,0.)); +#263361 = VECTOR('',#263362,1.); +#263362 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263363 = PLANE('',#263364); +#263364 = AXIS2_PLACEMENT_3D('',#263365,#263366,#263367); +#263365 = CARTESIAN_POINT('',(131.583147,-120.039687,0.)); +#263366 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#263367 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263368 = ADVANCED_FACE('',(#263369),#263394,.F.); +#263369 = FACE_BOUND('',#263370,.F.); +#263370 = EDGE_LOOP('',(#263371,#263372,#263380,#263388)); +#263371 = ORIENTED_EDGE('',*,*,#263350,.T.); +#263372 = ORIENTED_EDGE('',*,*,#263373,.T.); +#263373 = EDGE_CURVE('',#263343,#263374,#263376,.T.); +#263374 = VERTEX_POINT('',#263375); +#263375 = CARTESIAN_POINT('',(131.598079,-120.414753,-3.5E-02)); +#263376 = LINE('',#263377,#263378); +#263377 = CARTESIAN_POINT('',(131.598079,-120.075735,-3.5E-02)); +#263378 = VECTOR('',#263379,1.); +#263379 = DIRECTION('',(0.,-1.,0.)); +#263380 = ORIENTED_EDGE('',*,*,#263381,.F.); +#263381 = EDGE_CURVE('',#263382,#263374,#263384,.T.); +#263382 = VERTEX_POINT('',#263383); +#263383 = CARTESIAN_POINT('',(131.598079,-120.414753,0.)); +#263384 = LINE('',#263385,#263386); +#263385 = CARTESIAN_POINT('',(131.598079,-120.414753,0.)); +#263386 = VECTOR('',#263387,1.); +#263387 = DIRECTION('',(0.,0.,-1.)); +#263388 = ORIENTED_EDGE('',*,*,#263389,.F.); +#263389 = EDGE_CURVE('',#263351,#263382,#263390,.T.); +#263390 = LINE('',#263391,#263392); +#263391 = CARTESIAN_POINT('',(131.598079,-120.075735,0.)); +#263392 = VECTOR('',#263393,1.); +#263393 = DIRECTION('',(0.,-1.,0.)); +#263394 = PLANE('',#263395); +#263395 = AXIS2_PLACEMENT_3D('',#263396,#263397,#263398); +#263396 = CARTESIAN_POINT('',(131.598079,-120.075735,0.)); +#263397 = DIRECTION('',(-1.,-0.,-0.)); +#263398 = DIRECTION('',(0.,-1.,0.)); +#263399 = ADVANCED_FACE('',(#263400),#263425,.F.); +#263400 = FACE_BOUND('',#263401,.F.); +#263401 = EDGE_LOOP('',(#263402,#263403,#263411,#263419)); +#263402 = ORIENTED_EDGE('',*,*,#263381,.T.); +#263403 = ORIENTED_EDGE('',*,*,#263404,.T.); +#263404 = EDGE_CURVE('',#263374,#263405,#263407,.T.); +#263405 = VERTEX_POINT('',#263406); +#263406 = CARTESIAN_POINT('',(131.583147,-120.450801,-3.5E-02)); +#263407 = LINE('',#263408,#263409); +#263408 = CARTESIAN_POINT('',(131.598079,-120.414753,-3.5E-02)); +#263409 = VECTOR('',#263410,1.); +#263410 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263411 = ORIENTED_EDGE('',*,*,#263412,.F.); +#263412 = EDGE_CURVE('',#263413,#263405,#263415,.T.); +#263413 = VERTEX_POINT('',#263414); +#263414 = CARTESIAN_POINT('',(131.583147,-120.450801,0.)); +#263415 = LINE('',#263416,#263417); +#263416 = CARTESIAN_POINT('',(131.583147,-120.450801,0.)); +#263417 = VECTOR('',#263418,1.); +#263418 = DIRECTION('',(0.,0.,-1.)); +#263419 = ORIENTED_EDGE('',*,*,#263420,.F.); +#263420 = EDGE_CURVE('',#263382,#263413,#263421,.T.); +#263421 = LINE('',#263422,#263423); +#263422 = CARTESIAN_POINT('',(131.598079,-120.414753,0.)); +#263423 = VECTOR('',#263424,1.); +#263424 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263425 = PLANE('',#263426); +#263426 = AXIS2_PLACEMENT_3D('',#263427,#263428,#263429); +#263427 = CARTESIAN_POINT('',(131.598079,-120.414753,0.)); +#263428 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#263429 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263430 = ADVANCED_FACE('',(#263431),#263456,.F.); +#263431 = FACE_BOUND('',#263432,.F.); +#263432 = EDGE_LOOP('',(#263433,#263434,#263442,#263450)); +#263433 = ORIENTED_EDGE('',*,*,#263412,.T.); +#263434 = ORIENTED_EDGE('',*,*,#263435,.T.); +#263435 = EDGE_CURVE('',#263405,#263436,#263438,.T.); +#263436 = VERTEX_POINT('',#263437); +#263437 = CARTESIAN_POINT('',(131.099743,-120.936922,-3.5E-02)); +#263438 = LINE('',#263439,#263440); +#263439 = CARTESIAN_POINT('',(131.583147,-120.450801,-3.5E-02)); +#263440 = VECTOR('',#263441,1.); +#263441 = DIRECTION('',(-0.705122414032,-0.709085595137,0.)); +#263442 = ORIENTED_EDGE('',*,*,#263443,.F.); +#263443 = EDGE_CURVE('',#263444,#263436,#263446,.T.); +#263444 = VERTEX_POINT('',#263445); +#263445 = CARTESIAN_POINT('',(131.099743,-120.936922,0.)); +#263446 = LINE('',#263447,#263448); +#263447 = CARTESIAN_POINT('',(131.099743,-120.936922,0.)); +#263448 = VECTOR('',#263449,1.); +#263449 = DIRECTION('',(0.,0.,-1.)); +#263450 = ORIENTED_EDGE('',*,*,#263451,.F.); +#263451 = EDGE_CURVE('',#263413,#263444,#263452,.T.); +#263452 = LINE('',#263453,#263454); +#263453 = CARTESIAN_POINT('',(131.583147,-120.450801,0.)); +#263454 = VECTOR('',#263455,1.); +#263455 = DIRECTION('',(-0.705122414032,-0.709085595137,0.)); +#263456 = PLANE('',#263457); +#263457 = AXIS2_PLACEMENT_3D('',#263458,#263459,#263460); +#263458 = CARTESIAN_POINT('',(131.583147,-120.450801,0.)); +#263459 = DIRECTION('',(-0.709085595137,0.705122414032,0.)); +#263460 = DIRECTION('',(-0.705122414032,-0.709085595137,0.)); +#263461 = ADVANCED_FACE('',(#263462),#263487,.F.); +#263462 = FACE_BOUND('',#263463,.F.); +#263463 = EDGE_LOOP('',(#263464,#263465,#263473,#263481)); +#263464 = ORIENTED_EDGE('',*,*,#263443,.T.); +#263465 = ORIENTED_EDGE('',*,*,#263466,.T.); +#263466 = EDGE_CURVE('',#263436,#263467,#263469,.T.); +#263467 = VERTEX_POINT('',#263468); +#263468 = CARTESIAN_POINT('',(131.098079,-120.953823,-3.5E-02)); +#263469 = LINE('',#263470,#263471); +#263470 = CARTESIAN_POINT('',(131.099743,-120.936922,-3.5E-02)); +#263471 = VECTOR('',#263472,1.); +#263472 = DIRECTION('',(-9.798196256948E-02,-0.995188190751,0.)); +#263473 = ORIENTED_EDGE('',*,*,#263474,.F.); +#263474 = EDGE_CURVE('',#263475,#263467,#263477,.T.); +#263475 = VERTEX_POINT('',#263476); +#263476 = CARTESIAN_POINT('',(131.098079,-120.953823,0.)); +#263477 = LINE('',#263478,#263479); +#263478 = CARTESIAN_POINT('',(131.098079,-120.953823,0.)); +#263479 = VECTOR('',#263480,1.); +#263480 = DIRECTION('',(0.,0.,-1.)); +#263481 = ORIENTED_EDGE('',*,*,#263482,.F.); +#263482 = EDGE_CURVE('',#263444,#263475,#263483,.T.); +#263483 = LINE('',#263484,#263485); +#263484 = CARTESIAN_POINT('',(131.099743,-120.936922,0.)); +#263485 = VECTOR('',#263486,1.); +#263486 = DIRECTION('',(-9.798196256948E-02,-0.995188190751,0.)); +#263487 = PLANE('',#263488); +#263488 = AXIS2_PLACEMENT_3D('',#263489,#263490,#263491); +#263489 = CARTESIAN_POINT('',(131.099743,-120.936922,0.)); +#263490 = DIRECTION('',(-0.995188190751,9.798196256948E-02,0.)); +#263491 = DIRECTION('',(-9.798196256948E-02,-0.995188190751,0.)); +#263492 = ADVANCED_FACE('',(#263493),#263518,.F.); +#263493 = FACE_BOUND('',#263494,.F.); +#263494 = EDGE_LOOP('',(#263495,#263496,#263504,#263512)); +#263495 = ORIENTED_EDGE('',*,*,#263474,.T.); +#263496 = ORIENTED_EDGE('',*,*,#263497,.T.); +#263497 = EDGE_CURVE('',#263467,#263498,#263500,.T.); +#263498 = VERTEX_POINT('',#263499); +#263499 = CARTESIAN_POINT('',(131.083147,-120.989871,-3.5E-02)); +#263500 = LINE('',#263501,#263502); +#263501 = CARTESIAN_POINT('',(131.098079,-120.953823,-3.5E-02)); +#263502 = VECTOR('',#263503,1.); +#263503 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263504 = ORIENTED_EDGE('',*,*,#263505,.F.); +#263505 = EDGE_CURVE('',#263506,#263498,#263508,.T.); +#263506 = VERTEX_POINT('',#263507); +#263507 = CARTESIAN_POINT('',(131.083147,-120.989871,0.)); +#263508 = LINE('',#263509,#263510); +#263509 = CARTESIAN_POINT('',(131.083147,-120.989871,0.)); +#263510 = VECTOR('',#263511,1.); +#263511 = DIRECTION('',(0.,0.,-1.)); +#263512 = ORIENTED_EDGE('',*,*,#263513,.F.); +#263513 = EDGE_CURVE('',#263475,#263506,#263514,.T.); +#263514 = LINE('',#263515,#263516); +#263515 = CARTESIAN_POINT('',(131.098079,-120.953823,0.)); +#263516 = VECTOR('',#263517,1.); +#263517 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263518 = PLANE('',#263519); +#263519 = AXIS2_PLACEMENT_3D('',#263520,#263521,#263522); +#263520 = CARTESIAN_POINT('',(131.098079,-120.953823,0.)); +#263521 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#263522 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#263523 = ADVANCED_FACE('',(#263524),#263549,.F.); +#263524 = FACE_BOUND('',#263525,.F.); +#263525 = EDGE_LOOP('',(#263526,#263527,#263535,#263543)); +#263526 = ORIENTED_EDGE('',*,*,#263505,.T.); +#263527 = ORIENTED_EDGE('',*,*,#263528,.T.); +#263528 = EDGE_CURVE('',#263498,#263529,#263531,.T.); +#263529 = VERTEX_POINT('',#263530); +#263530 = CARTESIAN_POINT('',(130.489871,-121.583147,-3.5E-02)); +#263531 = LINE('',#263532,#263533); +#263532 = CARTESIAN_POINT('',(131.083147,-120.989871,-3.5E-02)); +#263533 = VECTOR('',#263534,1.); +#263534 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263535 = ORIENTED_EDGE('',*,*,#263536,.F.); +#263536 = EDGE_CURVE('',#263537,#263529,#263539,.T.); +#263537 = VERTEX_POINT('',#263538); +#263538 = CARTESIAN_POINT('',(130.489871,-121.583147,0.)); +#263539 = LINE('',#263540,#263541); +#263540 = CARTESIAN_POINT('',(130.489871,-121.583147,0.)); +#263541 = VECTOR('',#263542,1.); +#263542 = DIRECTION('',(0.,0.,-1.)); +#263543 = ORIENTED_EDGE('',*,*,#263544,.F.); +#263544 = EDGE_CURVE('',#263506,#263537,#263545,.T.); +#263545 = LINE('',#263546,#263547); +#263546 = CARTESIAN_POINT('',(131.083147,-120.989871,0.)); +#263547 = VECTOR('',#263548,1.); +#263548 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263549 = PLANE('',#263550); +#263550 = AXIS2_PLACEMENT_3D('',#263551,#263552,#263553); +#263551 = CARTESIAN_POINT('',(131.083147,-120.989871,0.)); +#263552 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#263553 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#263554 = ADVANCED_FACE('',(#263555),#263580,.F.); +#263555 = FACE_BOUND('',#263556,.F.); +#263556 = EDGE_LOOP('',(#263557,#263558,#263566,#263574)); +#263557 = ORIENTED_EDGE('',*,*,#263536,.T.); +#263558 = ORIENTED_EDGE('',*,*,#263559,.T.); +#263559 = EDGE_CURVE('',#263529,#263560,#263562,.T.); +#263560 = VERTEX_POINT('',#263561); +#263561 = CARTESIAN_POINT('',(130.453823,-121.598079,-3.5E-02)); +#263562 = LINE('',#263563,#263564); +#263563 = CARTESIAN_POINT('',(130.489871,-121.583147,-3.5E-02)); +#263564 = VECTOR('',#263565,1.); +#263565 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263566 = ORIENTED_EDGE('',*,*,#263567,.F.); +#263567 = EDGE_CURVE('',#263568,#263560,#263570,.T.); +#263568 = VERTEX_POINT('',#263569); +#263569 = CARTESIAN_POINT('',(130.453823,-121.598079,0.)); +#263570 = LINE('',#263571,#263572); +#263571 = CARTESIAN_POINT('',(130.453823,-121.598079,0.)); +#263572 = VECTOR('',#263573,1.); +#263573 = DIRECTION('',(0.,0.,-1.)); +#263574 = ORIENTED_EDGE('',*,*,#263575,.F.); +#263575 = EDGE_CURVE('',#263537,#263568,#263576,.T.); +#263576 = LINE('',#263577,#263578); +#263577 = CARTESIAN_POINT('',(130.489871,-121.583147,0.)); +#263578 = VECTOR('',#263579,1.); +#263579 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263580 = PLANE('',#263581); +#263581 = AXIS2_PLACEMENT_3D('',#263582,#263583,#263584); +#263582 = CARTESIAN_POINT('',(130.489871,-121.583147,0.)); +#263583 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#263584 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263585 = ADVANCED_FACE('',(#263586),#263611,.F.); +#263586 = FACE_BOUND('',#263587,.F.); +#263587 = EDGE_LOOP('',(#263588,#263589,#263597,#263605)); +#263588 = ORIENTED_EDGE('',*,*,#263567,.T.); +#263589 = ORIENTED_EDGE('',*,*,#263590,.T.); +#263590 = EDGE_CURVE('',#263560,#263591,#263593,.T.); +#263591 = VERTEX_POINT('',#263592); +#263592 = CARTESIAN_POINT('',(130.041422,-121.6,-3.5E-02)); +#263593 = LINE('',#263594,#263595); +#263594 = CARTESIAN_POINT('',(130.453823,-121.598079,-3.5E-02)); +#263595 = VECTOR('',#263596,1.); +#263596 = DIRECTION('',(-0.999989151286,-4.658037103734E-03,0.)); +#263597 = ORIENTED_EDGE('',*,*,#263598,.F.); +#263598 = EDGE_CURVE('',#263599,#263591,#263601,.T.); +#263599 = VERTEX_POINT('',#263600); +#263600 = CARTESIAN_POINT('',(130.041422,-121.6,0.)); +#263601 = LINE('',#263602,#263603); +#263602 = CARTESIAN_POINT('',(130.041422,-121.6,0.)); +#263603 = VECTOR('',#263604,1.); +#263604 = DIRECTION('',(0.,0.,-1.)); +#263605 = ORIENTED_EDGE('',*,*,#263606,.F.); +#263606 = EDGE_CURVE('',#263568,#263599,#263607,.T.); +#263607 = LINE('',#263608,#263609); +#263608 = CARTESIAN_POINT('',(130.453823,-121.598079,0.)); +#263609 = VECTOR('',#263610,1.); +#263610 = DIRECTION('',(-0.999989151286,-4.658037103734E-03,0.)); +#263611 = PLANE('',#263612); +#263612 = AXIS2_PLACEMENT_3D('',#263613,#263614,#263615); +#263613 = CARTESIAN_POINT('',(130.453823,-121.598079,0.)); +#263614 = DIRECTION('',(-4.658037103734E-03,0.999989151286,0.)); +#263615 = DIRECTION('',(-0.999989151286,-4.658037103734E-03,0.)); +#263616 = ADVANCED_FACE('',(#263617),#263642,.F.); +#263617 = FACE_BOUND('',#263618,.F.); +#263618 = EDGE_LOOP('',(#263619,#263620,#263628,#263636)); +#263619 = ORIENTED_EDGE('',*,*,#263598,.T.); +#263620 = ORIENTED_EDGE('',*,*,#263621,.T.); +#263621 = EDGE_CURVE('',#263591,#263622,#263624,.T.); +#263622 = VERTEX_POINT('',#263623); +#263623 = CARTESIAN_POINT('',(129.555557,-122.083147,-3.5E-02)); +#263624 = LINE('',#263625,#263626); +#263625 = CARTESIAN_POINT('',(130.041422,-121.6,-3.5E-02)); +#263626 = VECTOR('',#263627,1.); +#263627 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263628 = ORIENTED_EDGE('',*,*,#263629,.F.); +#263629 = EDGE_CURVE('',#263630,#263622,#263632,.T.); +#263630 = VERTEX_POINT('',#263631); +#263631 = CARTESIAN_POINT('',(129.555557,-122.083147,0.)); +#263632 = LINE('',#263633,#263634); +#263633 = CARTESIAN_POINT('',(129.555557,-122.083147,0.)); +#263634 = VECTOR('',#263635,1.); +#263635 = DIRECTION('',(0.,0.,-1.)); +#263636 = ORIENTED_EDGE('',*,*,#263637,.F.); +#263637 = EDGE_CURVE('',#263599,#263630,#263638,.T.); +#263638 = LINE('',#263639,#263640); +#263639 = CARTESIAN_POINT('',(130.041422,-121.6,0.)); +#263640 = VECTOR('',#263641,1.); +#263641 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263642 = PLANE('',#263643); +#263643 = AXIS2_PLACEMENT_3D('',#263644,#263645,#263646); +#263644 = CARTESIAN_POINT('',(130.041422,-121.6,0.)); +#263645 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#263646 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263647 = ADVANCED_FACE('',(#263648),#263673,.F.); +#263648 = FACE_BOUND('',#263649,.F.); +#263649 = EDGE_LOOP('',(#263650,#263651,#263659,#263667)); +#263650 = ORIENTED_EDGE('',*,*,#263629,.T.); +#263651 = ORIENTED_EDGE('',*,*,#263652,.T.); +#263652 = EDGE_CURVE('',#263622,#263653,#263655,.T.); +#263653 = VERTEX_POINT('',#263654); +#263654 = CARTESIAN_POINT('',(129.519509,-122.098079,-3.5E-02)); +#263655 = LINE('',#263656,#263657); +#263656 = CARTESIAN_POINT('',(129.555557,-122.083147,-3.5E-02)); +#263657 = VECTOR('',#263658,1.); +#263658 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263659 = ORIENTED_EDGE('',*,*,#263660,.F.); +#263660 = EDGE_CURVE('',#263661,#263653,#263663,.T.); +#263661 = VERTEX_POINT('',#263662); +#263662 = CARTESIAN_POINT('',(129.519509,-122.098079,0.)); +#263663 = LINE('',#263664,#263665); +#263664 = CARTESIAN_POINT('',(129.519509,-122.098079,0.)); +#263665 = VECTOR('',#263666,1.); +#263666 = DIRECTION('',(0.,0.,-1.)); +#263667 = ORIENTED_EDGE('',*,*,#263668,.F.); +#263668 = EDGE_CURVE('',#263630,#263661,#263669,.T.); +#263669 = LINE('',#263670,#263671); +#263670 = CARTESIAN_POINT('',(129.555557,-122.083147,0.)); +#263671 = VECTOR('',#263672,1.); +#263672 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263673 = PLANE('',#263674); +#263674 = AXIS2_PLACEMENT_3D('',#263675,#263676,#263677); +#263675 = CARTESIAN_POINT('',(129.555557,-122.083147,0.)); +#263676 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#263677 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#263678 = ADVANCED_FACE('',(#263679),#263704,.F.); +#263679 = FACE_BOUND('',#263680,.F.); +#263680 = EDGE_LOOP('',(#263681,#263682,#263690,#263698)); +#263681 = ORIENTED_EDGE('',*,*,#263660,.T.); +#263682 = ORIENTED_EDGE('',*,*,#263683,.T.); +#263683 = EDGE_CURVE('',#263653,#263684,#263686,.T.); +#263684 = VERTEX_POINT('',#263685); +#263685 = CARTESIAN_POINT('',(126.561422,-122.1,-3.5E-02)); +#263686 = LINE('',#263687,#263688); +#263687 = CARTESIAN_POINT('',(129.519509,-122.098079,-3.5E-02)); +#263688 = VECTOR('',#263689,1.); +#263689 = DIRECTION('',(-0.999999789136,-6.494060502365E-04,0.)); +#263690 = ORIENTED_EDGE('',*,*,#263691,.F.); +#263691 = EDGE_CURVE('',#263692,#263684,#263694,.T.); +#263692 = VERTEX_POINT('',#263693); +#263693 = CARTESIAN_POINT('',(126.561422,-122.1,0.)); +#263694 = LINE('',#263695,#263696); +#263695 = CARTESIAN_POINT('',(126.561422,-122.1,0.)); +#263696 = VECTOR('',#263697,1.); +#263697 = DIRECTION('',(0.,0.,-1.)); +#263698 = ORIENTED_EDGE('',*,*,#263699,.F.); +#263699 = EDGE_CURVE('',#263661,#263692,#263700,.T.); +#263700 = LINE('',#263701,#263702); +#263701 = CARTESIAN_POINT('',(129.519509,-122.098079,0.)); +#263702 = VECTOR('',#263703,1.); +#263703 = DIRECTION('',(-0.999999789136,-6.494060502365E-04,0.)); +#263704 = PLANE('',#263705); +#263705 = AXIS2_PLACEMENT_3D('',#263706,#263707,#263708); +#263706 = CARTESIAN_POINT('',(129.519509,-122.098079,0.)); +#263707 = DIRECTION('',(-6.494060502365E-04,0.999999789136,0.)); +#263708 = DIRECTION('',(-0.999999789136,-6.494060502365E-04,0.)); +#263709 = ADVANCED_FACE('',(#263710),#263735,.F.); +#263710 = FACE_BOUND('',#263711,.F.); +#263711 = EDGE_LOOP('',(#263712,#263713,#263721,#263729)); +#263712 = ORIENTED_EDGE('',*,*,#263691,.T.); +#263713 = ORIENTED_EDGE('',*,*,#263714,.T.); +#263714 = EDGE_CURVE('',#263684,#263715,#263717,.T.); +#263715 = VERTEX_POINT('',#263716); +#263716 = CARTESIAN_POINT('',(126.075557,-122.583147,-3.5E-02)); +#263717 = LINE('',#263718,#263719); +#263718 = CARTESIAN_POINT('',(126.561422,-122.1,-3.5E-02)); +#263719 = VECTOR('',#263720,1.); +#263720 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263721 = ORIENTED_EDGE('',*,*,#263722,.F.); +#263722 = EDGE_CURVE('',#263723,#263715,#263725,.T.); +#263723 = VERTEX_POINT('',#263724); +#263724 = CARTESIAN_POINT('',(126.075557,-122.583147,0.)); +#263725 = LINE('',#263726,#263727); +#263726 = CARTESIAN_POINT('',(126.075557,-122.583147,0.)); +#263727 = VECTOR('',#263728,1.); +#263728 = DIRECTION('',(0.,0.,-1.)); +#263729 = ORIENTED_EDGE('',*,*,#263730,.F.); +#263730 = EDGE_CURVE('',#263692,#263723,#263731,.T.); +#263731 = LINE('',#263732,#263733); +#263732 = CARTESIAN_POINT('',(126.561422,-122.1,0.)); +#263733 = VECTOR('',#263734,1.); +#263734 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263735 = PLANE('',#263736); +#263736 = AXIS2_PLACEMENT_3D('',#263737,#263738,#263739); +#263737 = CARTESIAN_POINT('',(126.561422,-122.1,0.)); +#263738 = DIRECTION('',(-0.705120630278,0.709087368916,0.)); +#263739 = DIRECTION('',(-0.709087368916,-0.705120630278,0.)); +#263740 = ADVANCED_FACE('',(#263741),#263768,.T.); +#263741 = FACE_BOUND('',#263742,.F.); +#263742 = EDGE_LOOP('',(#263743,#263744,#263753,#263761)); +#263743 = ORIENTED_EDGE('',*,*,#263722,.T.); +#263744 = ORIENTED_EDGE('',*,*,#263745,.T.); +#263745 = EDGE_CURVE('',#263715,#263746,#263748,.T.); +#263746 = VERTEX_POINT('',#263747); +#263747 = CARTESIAN_POINT('',(125.936853,-122.444443,-3.5E-02)); +#263748 = CIRCLE('',#263749,0.10000001929); +#263749 = AXIS2_PLACEMENT_3D('',#263750,#263751,#263752); +#263750 = CARTESIAN_POINT('',(126.02,-122.5,-3.5E-02)); +#263751 = DIRECTION('',(0.,0.,-1.)); +#263752 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#263753 = ORIENTED_EDGE('',*,*,#263754,.F.); +#263754 = EDGE_CURVE('',#263755,#263746,#263757,.T.); +#263755 = VERTEX_POINT('',#263756); +#263756 = CARTESIAN_POINT('',(125.936853,-122.444443,0.)); +#263757 = LINE('',#263758,#263759); +#263758 = CARTESIAN_POINT('',(125.936853,-122.444443,0.)); +#263759 = VECTOR('',#263760,1.); +#263760 = DIRECTION('',(0.,0.,-1.)); +#263761 = ORIENTED_EDGE('',*,*,#263762,.F.); +#263762 = EDGE_CURVE('',#263723,#263755,#263763,.T.); +#263763 = CIRCLE('',#263764,0.10000001929); +#263764 = AXIS2_PLACEMENT_3D('',#263765,#263766,#263767); +#263765 = CARTESIAN_POINT('',(126.02,-122.5,0.)); +#263766 = DIRECTION('',(0.,0.,-1.)); +#263767 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#263768 = CYLINDRICAL_SURFACE('',#263769,0.10000001929); +#263769 = AXIS2_PLACEMENT_3D('',#263770,#263771,#263772); +#263770 = CARTESIAN_POINT('',(126.02,-122.5,0.)); +#263771 = DIRECTION('',(-0.,-0.,1.)); +#263772 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#263773 = ADVANCED_FACE('',(#263774),#263799,.F.); +#263774 = FACE_BOUND('',#263775,.F.); +#263775 = EDGE_LOOP('',(#263776,#263777,#263785,#263793)); +#263776 = ORIENTED_EDGE('',*,*,#263754,.T.); +#263777 = ORIENTED_EDGE('',*,*,#263778,.T.); +#263778 = EDGE_CURVE('',#263746,#263779,#263781,.T.); +#263779 = VERTEX_POINT('',#263780); +#263780 = CARTESIAN_POINT('',(126.464443,-121.916853,-3.5E-02)); +#263781 = LINE('',#263782,#263783); +#263782 = CARTESIAN_POINT('',(125.936853,-122.444443,-3.5E-02)); +#263783 = VECTOR('',#263784,1.); +#263784 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263785 = ORIENTED_EDGE('',*,*,#263786,.F.); +#263786 = EDGE_CURVE('',#263787,#263779,#263789,.T.); +#263787 = VERTEX_POINT('',#263788); +#263788 = CARTESIAN_POINT('',(126.464443,-121.916853,0.)); +#263789 = LINE('',#263790,#263791); +#263790 = CARTESIAN_POINT('',(126.464443,-121.916853,0.)); +#263791 = VECTOR('',#263792,1.); +#263792 = DIRECTION('',(0.,0.,-1.)); +#263793 = ORIENTED_EDGE('',*,*,#263794,.F.); +#263794 = EDGE_CURVE('',#263755,#263787,#263795,.T.); +#263795 = LINE('',#263796,#263797); +#263796 = CARTESIAN_POINT('',(125.936853,-122.444443,0.)); +#263797 = VECTOR('',#263798,1.); +#263798 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263799 = PLANE('',#263800); +#263800 = AXIS2_PLACEMENT_3D('',#263801,#263802,#263803); +#263801 = CARTESIAN_POINT('',(125.936853,-122.444443,0.)); +#263802 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#263803 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#263804 = ADVANCED_FACE('',(#263805),#263830,.F.); +#263805 = FACE_BOUND('',#263806,.F.); +#263806 = EDGE_LOOP('',(#263807,#263808,#263816,#263824)); +#263807 = ORIENTED_EDGE('',*,*,#263786,.T.); +#263808 = ORIENTED_EDGE('',*,*,#263809,.T.); +#263809 = EDGE_CURVE('',#263779,#263810,#263812,.T.); +#263810 = VERTEX_POINT('',#263811); +#263811 = CARTESIAN_POINT('',(126.500491,-121.901921,-3.5E-02)); +#263812 = LINE('',#263813,#263814); +#263813 = CARTESIAN_POINT('',(126.464443,-121.916853,-3.5E-02)); +#263814 = VECTOR('',#263815,1.); +#263815 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263816 = ORIENTED_EDGE('',*,*,#263817,.F.); +#263817 = EDGE_CURVE('',#263818,#263810,#263820,.T.); +#263818 = VERTEX_POINT('',#263819); +#263819 = CARTESIAN_POINT('',(126.500491,-121.901921,0.)); +#263820 = LINE('',#263821,#263822); +#263821 = CARTESIAN_POINT('',(126.500491,-121.901921,0.)); +#263822 = VECTOR('',#263823,1.); +#263823 = DIRECTION('',(0.,0.,-1.)); +#263824 = ORIENTED_EDGE('',*,*,#263825,.F.); +#263825 = EDGE_CURVE('',#263787,#263818,#263826,.T.); +#263826 = LINE('',#263827,#263828); +#263827 = CARTESIAN_POINT('',(126.464443,-121.916853,0.)); +#263828 = VECTOR('',#263829,1.); +#263829 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263830 = PLANE('',#263831); +#263831 = AXIS2_PLACEMENT_3D('',#263832,#263833,#263834); +#263832 = CARTESIAN_POINT('',(126.464443,-121.916853,0.)); +#263833 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263834 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263835 = ADVANCED_FACE('',(#263836),#263861,.F.); +#263836 = FACE_BOUND('',#263837,.F.); +#263837 = EDGE_LOOP('',(#263838,#263839,#263847,#263855)); +#263838 = ORIENTED_EDGE('',*,*,#263817,.T.); +#263839 = ORIENTED_EDGE('',*,*,#263840,.T.); +#263840 = EDGE_CURVE('',#263810,#263841,#263843,.T.); +#263841 = VERTEX_POINT('',#263842); +#263842 = CARTESIAN_POINT('',(129.458578,-121.9,-3.5E-02)); +#263843 = LINE('',#263844,#263845); +#263844 = CARTESIAN_POINT('',(126.500491,-121.901921,-3.5E-02)); +#263845 = VECTOR('',#263846,1.); +#263846 = DIRECTION('',(0.999999789136,6.494060502365E-04,0.)); +#263847 = ORIENTED_EDGE('',*,*,#263848,.F.); +#263848 = EDGE_CURVE('',#263849,#263841,#263851,.T.); +#263849 = VERTEX_POINT('',#263850); +#263850 = CARTESIAN_POINT('',(129.458578,-121.9,0.)); +#263851 = LINE('',#263852,#263853); +#263852 = CARTESIAN_POINT('',(129.458578,-121.9,0.)); +#263853 = VECTOR('',#263854,1.); +#263854 = DIRECTION('',(0.,0.,-1.)); +#263855 = ORIENTED_EDGE('',*,*,#263856,.F.); +#263856 = EDGE_CURVE('',#263818,#263849,#263857,.T.); +#263857 = LINE('',#263858,#263859); +#263858 = CARTESIAN_POINT('',(126.500491,-121.901921,0.)); +#263859 = VECTOR('',#263860,1.); +#263860 = DIRECTION('',(0.999999789136,6.494060502365E-04,0.)); +#263861 = PLANE('',#263862); +#263862 = AXIS2_PLACEMENT_3D('',#263863,#263864,#263865); +#263863 = CARTESIAN_POINT('',(126.500491,-121.901921,0.)); +#263864 = DIRECTION('',(6.494060502365E-04,-0.999999789136,0.)); +#263865 = DIRECTION('',(0.999999789136,6.494060502365E-04,0.)); +#263866 = ADVANCED_FACE('',(#263867),#263892,.F.); +#263867 = FACE_BOUND('',#263868,.F.); +#263868 = EDGE_LOOP('',(#263869,#263870,#263878,#263886)); +#263869 = ORIENTED_EDGE('',*,*,#263848,.T.); +#263870 = ORIENTED_EDGE('',*,*,#263871,.T.); +#263871 = EDGE_CURVE('',#263841,#263872,#263874,.T.); +#263872 = VERTEX_POINT('',#263873); +#263873 = CARTESIAN_POINT('',(129.944443,-121.416853,-3.5E-02)); +#263874 = LINE('',#263875,#263876); +#263875 = CARTESIAN_POINT('',(129.458578,-121.9,-3.5E-02)); +#263876 = VECTOR('',#263877,1.); +#263877 = DIRECTION('',(0.709087368916,0.705120630278,0.)); +#263878 = ORIENTED_EDGE('',*,*,#263879,.F.); +#263879 = EDGE_CURVE('',#263880,#263872,#263882,.T.); +#263880 = VERTEX_POINT('',#263881); +#263881 = CARTESIAN_POINT('',(129.944443,-121.416853,0.)); +#263882 = LINE('',#263883,#263884); +#263883 = CARTESIAN_POINT('',(129.944443,-121.416853,0.)); +#263884 = VECTOR('',#263885,1.); +#263885 = DIRECTION('',(0.,0.,-1.)); +#263886 = ORIENTED_EDGE('',*,*,#263887,.F.); +#263887 = EDGE_CURVE('',#263849,#263880,#263888,.T.); +#263888 = LINE('',#263889,#263890); +#263889 = CARTESIAN_POINT('',(129.458578,-121.9,0.)); +#263890 = VECTOR('',#263891,1.); +#263891 = DIRECTION('',(0.709087368916,0.705120630278,0.)); +#263892 = PLANE('',#263893); +#263893 = AXIS2_PLACEMENT_3D('',#263894,#263895,#263896); +#263894 = CARTESIAN_POINT('',(129.458578,-121.9,0.)); +#263895 = DIRECTION('',(0.705120630278,-0.709087368916,0.)); +#263896 = DIRECTION('',(0.709087368916,0.705120630278,0.)); +#263897 = ADVANCED_FACE('',(#263898),#263923,.F.); +#263898 = FACE_BOUND('',#263899,.F.); +#263899 = EDGE_LOOP('',(#263900,#263901,#263909,#263917)); +#263900 = ORIENTED_EDGE('',*,*,#263879,.T.); +#263901 = ORIENTED_EDGE('',*,*,#263902,.T.); +#263902 = EDGE_CURVE('',#263872,#263903,#263905,.T.); +#263903 = VERTEX_POINT('',#263904); +#263904 = CARTESIAN_POINT('',(129.980491,-121.401921,-3.5E-02)); +#263905 = LINE('',#263906,#263907); +#263906 = CARTESIAN_POINT('',(129.944443,-121.416853,-3.5E-02)); +#263907 = VECTOR('',#263908,1.); +#263908 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263909 = ORIENTED_EDGE('',*,*,#263910,.F.); +#263910 = EDGE_CURVE('',#263911,#263903,#263913,.T.); +#263911 = VERTEX_POINT('',#263912); +#263912 = CARTESIAN_POINT('',(129.980491,-121.401921,0.)); +#263913 = LINE('',#263914,#263915); +#263914 = CARTESIAN_POINT('',(129.980491,-121.401921,0.)); +#263915 = VECTOR('',#263916,1.); +#263916 = DIRECTION('',(0.,0.,-1.)); +#263917 = ORIENTED_EDGE('',*,*,#263918,.F.); +#263918 = EDGE_CURVE('',#263880,#263911,#263919,.T.); +#263919 = LINE('',#263920,#263921); +#263920 = CARTESIAN_POINT('',(129.944443,-121.416853,0.)); +#263921 = VECTOR('',#263922,1.); +#263922 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263923 = PLANE('',#263924); +#263924 = AXIS2_PLACEMENT_3D('',#263925,#263926,#263927); +#263925 = CARTESIAN_POINT('',(129.944443,-121.416853,0.)); +#263926 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#263927 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#263928 = ADVANCED_FACE('',(#263929),#263954,.F.); +#263929 = FACE_BOUND('',#263930,.F.); +#263930 = EDGE_LOOP('',(#263931,#263932,#263940,#263948)); +#263931 = ORIENTED_EDGE('',*,*,#263910,.T.); +#263932 = ORIENTED_EDGE('',*,*,#263933,.T.); +#263933 = EDGE_CURVE('',#263903,#263934,#263936,.T.); +#263934 = VERTEX_POINT('',#263935); +#263935 = CARTESIAN_POINT('',(130.392892,-121.4,-3.5E-02)); +#263936 = LINE('',#263937,#263938); +#263937 = CARTESIAN_POINT('',(129.980491,-121.401921,-3.5E-02)); +#263938 = VECTOR('',#263939,1.); +#263939 = DIRECTION('',(0.999989151286,4.658037103734E-03,0.)); +#263940 = ORIENTED_EDGE('',*,*,#263941,.F.); +#263941 = EDGE_CURVE('',#263942,#263934,#263944,.T.); +#263942 = VERTEX_POINT('',#263943); +#263943 = CARTESIAN_POINT('',(130.392892,-121.4,0.)); +#263944 = LINE('',#263945,#263946); +#263945 = CARTESIAN_POINT('',(130.392892,-121.4,0.)); +#263946 = VECTOR('',#263947,1.); +#263947 = DIRECTION('',(0.,0.,-1.)); +#263948 = ORIENTED_EDGE('',*,*,#263949,.F.); +#263949 = EDGE_CURVE('',#263911,#263942,#263950,.T.); +#263950 = LINE('',#263951,#263952); +#263951 = CARTESIAN_POINT('',(129.980491,-121.401921,0.)); +#263952 = VECTOR('',#263953,1.); +#263953 = DIRECTION('',(0.999989151286,4.658037103734E-03,0.)); +#263954 = PLANE('',#263955); +#263955 = AXIS2_PLACEMENT_3D('',#263956,#263957,#263958); +#263956 = CARTESIAN_POINT('',(129.980491,-121.401921,0.)); +#263957 = DIRECTION('',(4.658037103734E-03,-0.999989151286,0.)); +#263958 = DIRECTION('',(0.999989151286,4.658037103734E-03,0.)); +#263959 = ADVANCED_FACE('',(#263960),#263985,.F.); +#263960 = FACE_BOUND('',#263961,.F.); +#263961 = EDGE_LOOP('',(#263962,#263963,#263971,#263979)); +#263962 = ORIENTED_EDGE('',*,*,#263941,.T.); +#263963 = ORIENTED_EDGE('',*,*,#263964,.T.); +#263964 = EDGE_CURVE('',#263934,#263965,#263967,.T.); +#263965 = VERTEX_POINT('',#263966); +#263966 = CARTESIAN_POINT('',(130.900256,-120.892635,-3.5E-02)); +#263967 = LINE('',#263968,#263969); +#263968 = CARTESIAN_POINT('',(130.392892,-121.4,-3.5E-02)); +#263969 = VECTOR('',#263970,1.); +#263970 = DIRECTION('',(0.707106084343,0.707107478029,0.)); +#263971 = ORIENTED_EDGE('',*,*,#263972,.F.); +#263972 = EDGE_CURVE('',#263973,#263965,#263975,.T.); +#263973 = VERTEX_POINT('',#263974); +#263974 = CARTESIAN_POINT('',(130.900256,-120.892635,0.)); +#263975 = LINE('',#263976,#263977); +#263976 = CARTESIAN_POINT('',(130.900256,-120.892635,0.)); +#263977 = VECTOR('',#263978,1.); +#263978 = DIRECTION('',(0.,0.,-1.)); +#263979 = ORIENTED_EDGE('',*,*,#263980,.F.); +#263980 = EDGE_CURVE('',#263942,#263973,#263981,.T.); +#263981 = LINE('',#263982,#263983); +#263982 = CARTESIAN_POINT('',(130.392892,-121.4,0.)); +#263983 = VECTOR('',#263984,1.); +#263984 = DIRECTION('',(0.707106084343,0.707107478029,0.)); +#263985 = PLANE('',#263986); +#263986 = AXIS2_PLACEMENT_3D('',#263987,#263988,#263989); +#263987 = CARTESIAN_POINT('',(130.392892,-121.4,0.)); +#263988 = DIRECTION('',(0.707107478029,-0.707106084343,0.)); +#263989 = DIRECTION('',(0.707106084343,0.707107478029,0.)); +#263990 = ADVANCED_FACE('',(#263991),#264016,.F.); +#263991 = FACE_BOUND('',#263992,.F.); +#263992 = EDGE_LOOP('',(#263993,#263994,#264002,#264010)); +#263993 = ORIENTED_EDGE('',*,*,#263972,.T.); +#263994 = ORIENTED_EDGE('',*,*,#263995,.T.); +#263995 = EDGE_CURVE('',#263965,#263996,#263998,.T.); +#263996 = VERTEX_POINT('',#263997); +#263997 = CARTESIAN_POINT('',(130.901921,-120.875735,-3.5E-02)); +#263998 = LINE('',#263999,#264000); +#263999 = CARTESIAN_POINT('',(130.900256,-120.892635,-3.5E-02)); +#264000 = VECTOR('',#264001,1.); +#264001 = DIRECTION('',(9.804602558221E-02,0.9951818813,0.)); +#264002 = ORIENTED_EDGE('',*,*,#264003,.F.); +#264003 = EDGE_CURVE('',#264004,#263996,#264006,.T.); +#264004 = VERTEX_POINT('',#264005); +#264005 = CARTESIAN_POINT('',(130.901921,-120.875735,0.)); +#264006 = LINE('',#264007,#264008); +#264007 = CARTESIAN_POINT('',(130.901921,-120.875735,0.)); +#264008 = VECTOR('',#264009,1.); +#264009 = DIRECTION('',(0.,0.,-1.)); +#264010 = ORIENTED_EDGE('',*,*,#264011,.F.); +#264011 = EDGE_CURVE('',#263973,#264004,#264012,.T.); +#264012 = LINE('',#264013,#264014); +#264013 = CARTESIAN_POINT('',(130.900256,-120.892635,0.)); +#264014 = VECTOR('',#264015,1.); +#264015 = DIRECTION('',(9.804602558221E-02,0.9951818813,0.)); +#264016 = PLANE('',#264017); +#264017 = AXIS2_PLACEMENT_3D('',#264018,#264019,#264020); +#264018 = CARTESIAN_POINT('',(130.900256,-120.892635,0.)); +#264019 = DIRECTION('',(0.9951818813,-9.804602558221E-02,0.)); +#264020 = DIRECTION('',(9.804602558221E-02,0.9951818813,0.)); +#264021 = ADVANCED_FACE('',(#264022),#264047,.F.); +#264022 = FACE_BOUND('',#264023,.F.); +#264023 = EDGE_LOOP('',(#264024,#264025,#264033,#264041)); +#264024 = ORIENTED_EDGE('',*,*,#264003,.T.); +#264025 = ORIENTED_EDGE('',*,*,#264026,.T.); +#264026 = EDGE_CURVE('',#263996,#264027,#264029,.T.); +#264027 = VERTEX_POINT('',#264028); +#264028 = CARTESIAN_POINT('',(130.916853,-120.839687,-3.5E-02)); +#264029 = LINE('',#264030,#264031); +#264030 = CARTESIAN_POINT('',(130.901921,-120.875735,-3.5E-02)); +#264031 = VECTOR('',#264032,1.); +#264032 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264033 = ORIENTED_EDGE('',*,*,#264034,.F.); +#264034 = EDGE_CURVE('',#264035,#264027,#264037,.T.); +#264035 = VERTEX_POINT('',#264036); +#264036 = CARTESIAN_POINT('',(130.916853,-120.839687,0.)); +#264037 = LINE('',#264038,#264039); +#264038 = CARTESIAN_POINT('',(130.916853,-120.839687,0.)); +#264039 = VECTOR('',#264040,1.); +#264040 = DIRECTION('',(0.,0.,-1.)); +#264041 = ORIENTED_EDGE('',*,*,#264042,.F.); +#264042 = EDGE_CURVE('',#264004,#264035,#264043,.T.); +#264043 = LINE('',#264044,#264045); +#264044 = CARTESIAN_POINT('',(130.901921,-120.875735,0.)); +#264045 = VECTOR('',#264046,1.); +#264046 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264047 = PLANE('',#264048); +#264048 = AXIS2_PLACEMENT_3D('',#264049,#264050,#264051); +#264049 = CARTESIAN_POINT('',(130.901921,-120.875735,0.)); +#264050 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#264051 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264052 = ADVANCED_FACE('',(#264053),#264078,.F.); +#264053 = FACE_BOUND('',#264054,.F.); +#264054 = EDGE_LOOP('',(#264055,#264056,#264064,#264072)); +#264055 = ORIENTED_EDGE('',*,*,#264034,.T.); +#264056 = ORIENTED_EDGE('',*,*,#264057,.T.); +#264057 = EDGE_CURVE('',#264027,#264058,#264060,.T.); +#264058 = VERTEX_POINT('',#264059); +#264059 = CARTESIAN_POINT('',(131.4,-120.353822,-3.5E-02)); +#264060 = LINE('',#264061,#264062); +#264061 = CARTESIAN_POINT('',(130.916853,-120.839687,-3.5E-02)); +#264062 = VECTOR('',#264063,1.); +#264063 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#264064 = ORIENTED_EDGE('',*,*,#264065,.F.); +#264065 = EDGE_CURVE('',#264066,#264058,#264068,.T.); +#264066 = VERTEX_POINT('',#264067); +#264067 = CARTESIAN_POINT('',(131.4,-120.353822,0.)); +#264068 = LINE('',#264069,#264070); +#264069 = CARTESIAN_POINT('',(131.4,-120.353822,0.)); +#264070 = VECTOR('',#264071,1.); +#264071 = DIRECTION('',(0.,0.,-1.)); +#264072 = ORIENTED_EDGE('',*,*,#264073,.F.); +#264073 = EDGE_CURVE('',#264035,#264066,#264074,.T.); +#264074 = LINE('',#264075,#264076); +#264075 = CARTESIAN_POINT('',(130.916853,-120.839687,0.)); +#264076 = VECTOR('',#264077,1.); +#264077 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#264078 = PLANE('',#264079); +#264079 = AXIS2_PLACEMENT_3D('',#264080,#264081,#264082); +#264080 = CARTESIAN_POINT('',(130.916853,-120.839687,0.)); +#264081 = DIRECTION('',(0.709087368916,-0.705120630278,0.)); +#264082 = DIRECTION('',(0.705120630278,0.709087368916,0.)); +#264083 = ADVANCED_FACE('',(#264084),#264109,.F.); +#264084 = FACE_BOUND('',#264085,.F.); +#264085 = EDGE_LOOP('',(#264086,#264087,#264095,#264103)); +#264086 = ORIENTED_EDGE('',*,*,#264065,.T.); +#264087 = ORIENTED_EDGE('',*,*,#264088,.T.); +#264088 = EDGE_CURVE('',#264058,#264089,#264091,.T.); +#264089 = VERTEX_POINT('',#264090); +#264090 = CARTESIAN_POINT('',(131.4,-120.136665,-3.5E-02)); +#264091 = LINE('',#264092,#264093); +#264092 = CARTESIAN_POINT('',(131.4,-120.353822,-3.5E-02)); +#264093 = VECTOR('',#264094,1.); +#264094 = DIRECTION('',(0.,1.,0.)); +#264095 = ORIENTED_EDGE('',*,*,#264096,.F.); +#264096 = EDGE_CURVE('',#264097,#264089,#264099,.T.); +#264097 = VERTEX_POINT('',#264098); +#264098 = CARTESIAN_POINT('',(131.4,-120.136665,0.)); +#264099 = LINE('',#264100,#264101); +#264100 = CARTESIAN_POINT('',(131.4,-120.136665,0.)); +#264101 = VECTOR('',#264102,1.); +#264102 = DIRECTION('',(0.,0.,-1.)); +#264103 = ORIENTED_EDGE('',*,*,#264104,.F.); +#264104 = EDGE_CURVE('',#264066,#264097,#264105,.T.); +#264105 = LINE('',#264106,#264107); +#264106 = CARTESIAN_POINT('',(131.4,-120.353822,0.)); +#264107 = VECTOR('',#264108,1.); +#264108 = DIRECTION('',(0.,1.,0.)); +#264109 = PLANE('',#264110); +#264110 = AXIS2_PLACEMENT_3D('',#264111,#264112,#264113); +#264111 = CARTESIAN_POINT('',(131.4,-120.353822,0.)); +#264112 = DIRECTION('',(1.,-0.,0.)); +#264113 = DIRECTION('',(0.,1.,0.)); +#264114 = ADVANCED_FACE('',(#264115),#264140,.F.); +#264115 = FACE_BOUND('',#264116,.F.); +#264116 = EDGE_LOOP('',(#264117,#264118,#264126,#264134)); +#264117 = ORIENTED_EDGE('',*,*,#264096,.T.); +#264118 = ORIENTED_EDGE('',*,*,#264119,.T.); +#264119 = EDGE_CURVE('',#264089,#264120,#264122,.T.); +#264120 = VERTEX_POINT('',#264121); +#264121 = CARTESIAN_POINT('',(131.316853,-120.050801,-3.5E-02)); +#264122 = LINE('',#264123,#264124); +#264123 = CARTESIAN_POINT('',(131.4,-120.136665,-3.5E-02)); +#264124 = VECTOR('',#264125,1.); +#264125 = DIRECTION('',(-0.695649535872,0.718381321612,0.)); +#264126 = ORIENTED_EDGE('',*,*,#264127,.F.); +#264127 = EDGE_CURVE('',#264128,#264120,#264130,.T.); +#264128 = VERTEX_POINT('',#264129); +#264129 = CARTESIAN_POINT('',(131.316853,-120.050801,0.)); +#264130 = LINE('',#264131,#264132); +#264131 = CARTESIAN_POINT('',(131.316853,-120.050801,0.)); +#264132 = VECTOR('',#264133,1.); +#264133 = DIRECTION('',(0.,0.,-1.)); +#264134 = ORIENTED_EDGE('',*,*,#264135,.F.); +#264135 = EDGE_CURVE('',#264097,#264128,#264136,.T.); +#264136 = LINE('',#264137,#264138); +#264137 = CARTESIAN_POINT('',(131.4,-120.136665,0.)); +#264138 = VECTOR('',#264139,1.); +#264139 = DIRECTION('',(-0.695649535872,0.718381321612,0.)); +#264140 = PLANE('',#264141); +#264141 = AXIS2_PLACEMENT_3D('',#264142,#264143,#264144); +#264142 = CARTESIAN_POINT('',(131.4,-120.136665,0.)); +#264143 = DIRECTION('',(0.718381321612,0.695649535872,0.)); +#264144 = DIRECTION('',(-0.695649535872,0.718381321612,0.)); +#264145 = ADVANCED_FACE('',(#264146),#264171,.F.); +#264146 = FACE_BOUND('',#264147,.F.); +#264147 = EDGE_LOOP('',(#264148,#264149,#264157,#264165)); +#264148 = ORIENTED_EDGE('',*,*,#264127,.T.); +#264149 = ORIENTED_EDGE('',*,*,#264150,.T.); +#264150 = EDGE_CURVE('',#264120,#264151,#264153,.T.); +#264151 = VERTEX_POINT('',#264152); +#264152 = CARTESIAN_POINT('',(131.301921,-120.014753,-3.5E-02)); +#264153 = LINE('',#264154,#264155); +#264154 = CARTESIAN_POINT('',(131.316853,-120.050801,-3.5E-02)); +#264155 = VECTOR('',#264156,1.); +#264156 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#264157 = ORIENTED_EDGE('',*,*,#264158,.F.); +#264158 = EDGE_CURVE('',#264159,#264151,#264161,.T.); +#264159 = VERTEX_POINT('',#264160); +#264160 = CARTESIAN_POINT('',(131.301921,-120.014753,0.)); +#264161 = LINE('',#264162,#264163); +#264162 = CARTESIAN_POINT('',(131.301921,-120.014753,0.)); +#264163 = VECTOR('',#264164,1.); +#264164 = DIRECTION('',(0.,0.,-1.)); +#264165 = ORIENTED_EDGE('',*,*,#264166,.F.); +#264166 = EDGE_CURVE('',#264128,#264159,#264167,.T.); +#264167 = LINE('',#264168,#264169); +#264168 = CARTESIAN_POINT('',(131.316853,-120.050801,0.)); +#264169 = VECTOR('',#264170,1.); +#264170 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#264171 = PLANE('',#264172); +#264172 = AXIS2_PLACEMENT_3D('',#264173,#264174,#264175); +#264173 = CARTESIAN_POINT('',(131.316853,-120.050801,0.)); +#264174 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#264175 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#264176 = ADVANCED_FACE('',(#264177),#264202,.F.); +#264177 = FACE_BOUND('',#264178,.F.); +#264178 = EDGE_LOOP('',(#264179,#264180,#264188,#264196)); +#264179 = ORIENTED_EDGE('',*,*,#264158,.T.); +#264180 = ORIENTED_EDGE('',*,*,#264181,.T.); +#264181 = EDGE_CURVE('',#264151,#264182,#264184,.T.); +#264182 = VERTEX_POINT('',#264183); +#264183 = CARTESIAN_POINT('',(131.301921,-119.585247,-3.5E-02)); +#264184 = LINE('',#264185,#264186); +#264185 = CARTESIAN_POINT('',(131.301921,-120.014753,-3.5E-02)); +#264186 = VECTOR('',#264187,1.); +#264187 = DIRECTION('',(0.,1.,0.)); +#264188 = ORIENTED_EDGE('',*,*,#264189,.F.); +#264189 = EDGE_CURVE('',#264190,#264182,#264192,.T.); +#264190 = VERTEX_POINT('',#264191); +#264191 = CARTESIAN_POINT('',(131.301921,-119.585247,0.)); +#264192 = LINE('',#264193,#264194); +#264193 = CARTESIAN_POINT('',(131.301921,-119.585247,0.)); +#264194 = VECTOR('',#264195,1.); +#264195 = DIRECTION('',(0.,0.,-1.)); +#264196 = ORIENTED_EDGE('',*,*,#264197,.F.); +#264197 = EDGE_CURVE('',#264159,#264190,#264198,.T.); +#264198 = LINE('',#264199,#264200); +#264199 = CARTESIAN_POINT('',(131.301921,-120.014753,0.)); +#264200 = VECTOR('',#264201,1.); +#264201 = DIRECTION('',(0.,1.,0.)); +#264202 = PLANE('',#264203); +#264203 = AXIS2_PLACEMENT_3D('',#264204,#264205,#264206); +#264204 = CARTESIAN_POINT('',(131.301921,-120.014753,0.)); +#264205 = DIRECTION('',(1.,-0.,0.)); +#264206 = DIRECTION('',(0.,1.,0.)); +#264207 = ADVANCED_FACE('',(#264208),#264233,.F.); +#264208 = FACE_BOUND('',#264209,.F.); +#264209 = EDGE_LOOP('',(#264210,#264211,#264219,#264227)); +#264210 = ORIENTED_EDGE('',*,*,#264189,.T.); +#264211 = ORIENTED_EDGE('',*,*,#264212,.T.); +#264212 = EDGE_CURVE('',#264182,#264213,#264215,.T.); +#264213 = VERTEX_POINT('',#264214); +#264214 = CARTESIAN_POINT('',(131.316853,-119.549199,-3.5E-02)); +#264215 = LINE('',#264216,#264217); +#264216 = CARTESIAN_POINT('',(131.301921,-119.585247,-3.5E-02)); +#264217 = VECTOR('',#264218,1.); +#264218 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264219 = ORIENTED_EDGE('',*,*,#264220,.F.); +#264220 = EDGE_CURVE('',#264221,#264213,#264223,.T.); +#264221 = VERTEX_POINT('',#264222); +#264222 = CARTESIAN_POINT('',(131.316853,-119.549199,0.)); +#264223 = LINE('',#264224,#264225); +#264224 = CARTESIAN_POINT('',(131.316853,-119.549199,0.)); +#264225 = VECTOR('',#264226,1.); +#264226 = DIRECTION('',(0.,0.,-1.)); +#264227 = ORIENTED_EDGE('',*,*,#264228,.F.); +#264228 = EDGE_CURVE('',#264190,#264221,#264229,.T.); +#264229 = LINE('',#264230,#264231); +#264230 = CARTESIAN_POINT('',(131.301921,-119.585247,0.)); +#264231 = VECTOR('',#264232,1.); +#264232 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264233 = PLANE('',#264234); +#264234 = AXIS2_PLACEMENT_3D('',#264235,#264236,#264237); +#264235 = CARTESIAN_POINT('',(131.301921,-119.585247,0.)); +#264236 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#264237 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#264238 = ADVANCED_FACE('',(#264239),#264255,.F.); +#264239 = FACE_BOUND('',#264240,.F.); +#264240 = EDGE_LOOP('',(#264241,#264242,#264248,#264249)); +#264241 = ORIENTED_EDGE('',*,*,#264220,.T.); +#264242 = ORIENTED_EDGE('',*,*,#264243,.T.); +#264243 = EDGE_CURVE('',#264213,#263116,#264244,.T.); +#264244 = LINE('',#264245,#264246); +#264245 = CARTESIAN_POINT('',(131.316853,-119.549199,-3.5E-02)); +#264246 = VECTOR('',#264247,1.); +#264247 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#264248 = ORIENTED_EDGE('',*,*,#263113,.F.); +#264249 = ORIENTED_EDGE('',*,*,#264250,.F.); +#264250 = EDGE_CURVE('',#264221,#263114,#264251,.T.); +#264251 = LINE('',#264252,#264253); +#264252 = CARTESIAN_POINT('',(131.316853,-119.549199,0.)); +#264253 = VECTOR('',#264254,1.); +#264254 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#264255 = PLANE('',#264256); +#264256 = AXIS2_PLACEMENT_3D('',#264257,#264258,#264259); +#264257 = CARTESIAN_POINT('',(131.316853,-119.549199,0.)); +#264258 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#264259 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#264260 = ADVANCED_FACE('',(#264261),#264300,.F.); +#264261 = FACE_BOUND('',#264262,.F.); +#264262 = EDGE_LOOP('',(#264263,#264264,#264265,#264266,#264267,#264268, + #264269,#264270,#264271,#264272,#264273,#264274,#264275,#264276, + #264277,#264278,#264279,#264280,#264281,#264282,#264283,#264284, + #264285,#264286,#264287,#264288,#264289,#264290,#264291,#264292, + #264293,#264294,#264295,#264296,#264297,#264298,#264299)); +#264263 = ORIENTED_EDGE('',*,*,#263139,.T.); +#264264 = ORIENTED_EDGE('',*,*,#263170,.T.); +#264265 = ORIENTED_EDGE('',*,*,#263202,.T.); +#264266 = ORIENTED_EDGE('',*,*,#263234,.T.); +#264267 = ORIENTED_EDGE('',*,*,#263265,.T.); +#264268 = ORIENTED_EDGE('',*,*,#263296,.T.); +#264269 = ORIENTED_EDGE('',*,*,#263327,.T.); +#264270 = ORIENTED_EDGE('',*,*,#263358,.T.); +#264271 = ORIENTED_EDGE('',*,*,#263389,.T.); +#264272 = ORIENTED_EDGE('',*,*,#263420,.T.); +#264273 = ORIENTED_EDGE('',*,*,#263451,.T.); +#264274 = ORIENTED_EDGE('',*,*,#263482,.T.); +#264275 = ORIENTED_EDGE('',*,*,#263513,.T.); +#264276 = ORIENTED_EDGE('',*,*,#263544,.T.); +#264277 = ORIENTED_EDGE('',*,*,#263575,.T.); +#264278 = ORIENTED_EDGE('',*,*,#263606,.T.); +#264279 = ORIENTED_EDGE('',*,*,#263637,.T.); +#264280 = ORIENTED_EDGE('',*,*,#263668,.T.); +#264281 = ORIENTED_EDGE('',*,*,#263699,.T.); +#264282 = ORIENTED_EDGE('',*,*,#263730,.T.); +#264283 = ORIENTED_EDGE('',*,*,#263762,.T.); +#264284 = ORIENTED_EDGE('',*,*,#263794,.T.); +#264285 = ORIENTED_EDGE('',*,*,#263825,.T.); +#264286 = ORIENTED_EDGE('',*,*,#263856,.T.); +#264287 = ORIENTED_EDGE('',*,*,#263887,.T.); +#264288 = ORIENTED_EDGE('',*,*,#263918,.T.); +#264289 = ORIENTED_EDGE('',*,*,#263949,.T.); +#264290 = ORIENTED_EDGE('',*,*,#263980,.T.); +#264291 = ORIENTED_EDGE('',*,*,#264011,.T.); +#264292 = ORIENTED_EDGE('',*,*,#264042,.T.); +#264293 = ORIENTED_EDGE('',*,*,#264073,.T.); +#264294 = ORIENTED_EDGE('',*,*,#264104,.T.); +#264295 = ORIENTED_EDGE('',*,*,#264135,.T.); +#264296 = ORIENTED_EDGE('',*,*,#264166,.T.); +#264297 = ORIENTED_EDGE('',*,*,#264197,.T.); +#264298 = ORIENTED_EDGE('',*,*,#264228,.T.); +#264299 = ORIENTED_EDGE('',*,*,#264250,.T.); +#264300 = PLANE('',#264301); +#264301 = AXIS2_PLACEMENT_3D('',#264302,#264303,#264304); +#264302 = CARTESIAN_POINT('',(0.,0.,0.)); +#264303 = DIRECTION('',(-0.,-0.,-1.)); +#264304 = DIRECTION('',(-1.,0.,0.)); +#264305 = ADVANCED_FACE('',(#264306),#264345,.T.); +#264306 = FACE_BOUND('',#264307,.T.); +#264307 = EDGE_LOOP('',(#264308,#264309,#264310,#264311,#264312,#264313, + #264314,#264315,#264316,#264317,#264318,#264319,#264320,#264321, + #264322,#264323,#264324,#264325,#264326,#264327,#264328,#264329, + #264330,#264331,#264332,#264333,#264334,#264335,#264336,#264337, + #264338,#264339,#264340,#264341,#264342,#264343,#264344)); +#264308 = ORIENTED_EDGE('',*,*,#263123,.T.); +#264309 = ORIENTED_EDGE('',*,*,#263154,.T.); +#264310 = ORIENTED_EDGE('',*,*,#263185,.T.); +#264311 = ORIENTED_EDGE('',*,*,#263218,.T.); +#264312 = ORIENTED_EDGE('',*,*,#263249,.T.); +#264313 = ORIENTED_EDGE('',*,*,#263280,.T.); +#264314 = ORIENTED_EDGE('',*,*,#263311,.T.); +#264315 = ORIENTED_EDGE('',*,*,#263342,.T.); +#264316 = ORIENTED_EDGE('',*,*,#263373,.T.); +#264317 = ORIENTED_EDGE('',*,*,#263404,.T.); +#264318 = ORIENTED_EDGE('',*,*,#263435,.T.); +#264319 = ORIENTED_EDGE('',*,*,#263466,.T.); +#264320 = ORIENTED_EDGE('',*,*,#263497,.T.); +#264321 = ORIENTED_EDGE('',*,*,#263528,.T.); +#264322 = ORIENTED_EDGE('',*,*,#263559,.T.); +#264323 = ORIENTED_EDGE('',*,*,#263590,.T.); +#264324 = ORIENTED_EDGE('',*,*,#263621,.T.); +#264325 = ORIENTED_EDGE('',*,*,#263652,.T.); +#264326 = ORIENTED_EDGE('',*,*,#263683,.T.); +#264327 = ORIENTED_EDGE('',*,*,#263714,.T.); +#264328 = ORIENTED_EDGE('',*,*,#263745,.T.); +#264329 = ORIENTED_EDGE('',*,*,#263778,.T.); +#264330 = ORIENTED_EDGE('',*,*,#263809,.T.); +#264331 = ORIENTED_EDGE('',*,*,#263840,.T.); +#264332 = ORIENTED_EDGE('',*,*,#263871,.T.); +#264333 = ORIENTED_EDGE('',*,*,#263902,.T.); +#264334 = ORIENTED_EDGE('',*,*,#263933,.T.); +#264335 = ORIENTED_EDGE('',*,*,#263964,.T.); +#264336 = ORIENTED_EDGE('',*,*,#263995,.T.); +#264337 = ORIENTED_EDGE('',*,*,#264026,.T.); +#264338 = ORIENTED_EDGE('',*,*,#264057,.T.); +#264339 = ORIENTED_EDGE('',*,*,#264088,.T.); +#264340 = ORIENTED_EDGE('',*,*,#264119,.T.); +#264341 = ORIENTED_EDGE('',*,*,#264150,.T.); +#264342 = ORIENTED_EDGE('',*,*,#264181,.T.); +#264343 = ORIENTED_EDGE('',*,*,#264212,.T.); +#264344 = ORIENTED_EDGE('',*,*,#264243,.T.); +#264345 = PLANE('',#264346); +#264346 = AXIS2_PLACEMENT_3D('',#264347,#264348,#264349); +#264347 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#264348 = DIRECTION('',(-0.,-0.,-1.)); +#264349 = DIRECTION('',(-1.,0.,0.)); +#264350 = MANIFOLD_SOLID_BREP('',#264351); +#264351 = CLOSED_SHELL('',(#264352,#264392,#264423,#264454,#264485, + #264518,#264549,#264580,#264611,#264644,#264666,#264684)); +#264352 = ADVANCED_FACE('',(#264353),#264387,.F.); +#264353 = FACE_BOUND('',#264354,.F.); +#264354 = EDGE_LOOP('',(#264355,#264365,#264373,#264381)); +#264355 = ORIENTED_EDGE('',*,*,#264356,.T.); +#264356 = EDGE_CURVE('',#264357,#264359,#264361,.T.); +#264357 = VERTEX_POINT('',#264358); +#264358 = CARTESIAN_POINT('',(146.733147,-127.594443,0.)); +#264359 = VERTEX_POINT('',#264360); +#264360 = CARTESIAN_POINT('',(146.733147,-127.594443,-3.5E-02)); +#264361 = LINE('',#264362,#264363); +#264362 = CARTESIAN_POINT('',(146.733147,-127.594443,0.)); +#264363 = VECTOR('',#264364,1.); +#264364 = DIRECTION('',(0.,0.,-1.)); +#264365 = ORIENTED_EDGE('',*,*,#264366,.T.); +#264366 = EDGE_CURVE('',#264359,#264367,#264369,.T.); +#264367 = VERTEX_POINT('',#264368); +#264368 = CARTESIAN_POINT('',(146.748079,-127.630491,-3.5E-02)); +#264369 = LINE('',#264370,#264371); +#264370 = CARTESIAN_POINT('',(146.733147,-127.594443,-3.5E-02)); +#264371 = VECTOR('',#264372,1.); +#264372 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264373 = ORIENTED_EDGE('',*,*,#264374,.F.); +#264374 = EDGE_CURVE('',#264375,#264367,#264377,.T.); +#264375 = VERTEX_POINT('',#264376); +#264376 = CARTESIAN_POINT('',(146.748079,-127.630491,0.)); +#264377 = LINE('',#264378,#264379); +#264378 = CARTESIAN_POINT('',(146.748079,-127.630491,0.)); +#264379 = VECTOR('',#264380,1.); +#264380 = DIRECTION('',(0.,0.,-1.)); +#264381 = ORIENTED_EDGE('',*,*,#264382,.F.); +#264382 = EDGE_CURVE('',#264357,#264375,#264383,.T.); +#264383 = LINE('',#264384,#264385); +#264384 = CARTESIAN_POINT('',(146.733147,-127.594443,0.)); +#264385 = VECTOR('',#264386,1.); +#264386 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264387 = PLANE('',#264388); +#264388 = AXIS2_PLACEMENT_3D('',#264389,#264390,#264391); +#264389 = CARTESIAN_POINT('',(146.733147,-127.594443,0.)); +#264390 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#264391 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264392 = ADVANCED_FACE('',(#264393),#264418,.F.); +#264393 = FACE_BOUND('',#264394,.F.); +#264394 = EDGE_LOOP('',(#264395,#264396,#264404,#264412)); +#264395 = ORIENTED_EDGE('',*,*,#264374,.T.); +#264396 = ORIENTED_EDGE('',*,*,#264397,.T.); +#264397 = EDGE_CURVE('',#264367,#264398,#264400,.T.); +#264398 = VERTEX_POINT('',#264399); +#264399 = CARTESIAN_POINT('',(146.748079,-130.494509,-3.5E-02)); +#264400 = LINE('',#264401,#264402); +#264401 = CARTESIAN_POINT('',(146.748079,-127.630491,-3.5E-02)); +#264402 = VECTOR('',#264403,1.); +#264403 = DIRECTION('',(0.,-1.,0.)); +#264404 = ORIENTED_EDGE('',*,*,#264405,.F.); +#264405 = EDGE_CURVE('',#264406,#264398,#264408,.T.); +#264406 = VERTEX_POINT('',#264407); +#264407 = CARTESIAN_POINT('',(146.748079,-130.494509,0.)); +#264408 = LINE('',#264409,#264410); +#264409 = CARTESIAN_POINT('',(146.748079,-130.494509,0.)); +#264410 = VECTOR('',#264411,1.); +#264411 = DIRECTION('',(0.,0.,-1.)); +#264412 = ORIENTED_EDGE('',*,*,#264413,.F.); +#264413 = EDGE_CURVE('',#264375,#264406,#264414,.T.); +#264414 = LINE('',#264415,#264416); +#264415 = CARTESIAN_POINT('',(146.748079,-127.630491,0.)); +#264416 = VECTOR('',#264417,1.); +#264417 = DIRECTION('',(0.,-1.,0.)); +#264418 = PLANE('',#264419); +#264419 = AXIS2_PLACEMENT_3D('',#264420,#264421,#264422); +#264420 = CARTESIAN_POINT('',(146.748079,-127.630491,0.)); +#264421 = DIRECTION('',(-1.,-0.,-0.)); +#264422 = DIRECTION('',(0.,-1.,0.)); +#264423 = ADVANCED_FACE('',(#264424),#264449,.F.); +#264424 = FACE_BOUND('',#264425,.F.); +#264425 = EDGE_LOOP('',(#264426,#264427,#264435,#264443)); +#264426 = ORIENTED_EDGE('',*,*,#264405,.T.); +#264427 = ORIENTED_EDGE('',*,*,#264428,.T.); +#264428 = EDGE_CURVE('',#264398,#264429,#264431,.T.); +#264429 = VERTEX_POINT('',#264430); +#264430 = CARTESIAN_POINT('',(146.733147,-130.530557,-3.5E-02)); +#264431 = LINE('',#264432,#264433); +#264432 = CARTESIAN_POINT('',(146.748079,-130.494509,-3.5E-02)); +#264433 = VECTOR('',#264434,1.); +#264434 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#264435 = ORIENTED_EDGE('',*,*,#264436,.F.); +#264436 = EDGE_CURVE('',#264437,#264429,#264439,.T.); +#264437 = VERTEX_POINT('',#264438); +#264438 = CARTESIAN_POINT('',(146.733147,-130.530557,0.)); +#264439 = LINE('',#264440,#264441); +#264440 = CARTESIAN_POINT('',(146.733147,-130.530557,0.)); +#264441 = VECTOR('',#264442,1.); +#264442 = DIRECTION('',(0.,0.,-1.)); +#264443 = ORIENTED_EDGE('',*,*,#264444,.F.); +#264444 = EDGE_CURVE('',#264406,#264437,#264445,.T.); +#264445 = LINE('',#264446,#264447); +#264446 = CARTESIAN_POINT('',(146.748079,-130.494509,0.)); +#264447 = VECTOR('',#264448,1.); +#264448 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#264449 = PLANE('',#264450); +#264450 = AXIS2_PLACEMENT_3D('',#264451,#264452,#264453); +#264451 = CARTESIAN_POINT('',(146.748079,-130.494509,0.)); +#264452 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#264453 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#264454 = ADVANCED_FACE('',(#264455),#264480,.F.); +#264455 = FACE_BOUND('',#264456,.F.); +#264456 = EDGE_LOOP('',(#264457,#264458,#264466,#264474)); +#264457 = ORIENTED_EDGE('',*,*,#264436,.T.); +#264458 = ORIENTED_EDGE('',*,*,#264459,.T.); +#264459 = EDGE_CURVE('',#264429,#264460,#264462,.T.); +#264460 = VERTEX_POINT('',#264461); +#264461 = CARTESIAN_POINT('',(146.505557,-130.758147,-3.5E-02)); +#264462 = LINE('',#264463,#264464); +#264463 = CARTESIAN_POINT('',(146.733147,-130.530557,-3.5E-02)); +#264464 = VECTOR('',#264465,1.); +#264465 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#264466 = ORIENTED_EDGE('',*,*,#264467,.F.); +#264467 = EDGE_CURVE('',#264468,#264460,#264470,.T.); +#264468 = VERTEX_POINT('',#264469); +#264469 = CARTESIAN_POINT('',(146.505557,-130.758147,0.)); +#264470 = LINE('',#264471,#264472); +#264471 = CARTESIAN_POINT('',(146.505557,-130.758147,0.)); +#264472 = VECTOR('',#264473,1.); +#264473 = DIRECTION('',(0.,0.,-1.)); +#264474 = ORIENTED_EDGE('',*,*,#264475,.F.); +#264475 = EDGE_CURVE('',#264437,#264468,#264476,.T.); +#264476 = LINE('',#264477,#264478); +#264477 = CARTESIAN_POINT('',(146.733147,-130.530557,0.)); +#264478 = VECTOR('',#264479,1.); +#264479 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#264480 = PLANE('',#264481); +#264481 = AXIS2_PLACEMENT_3D('',#264482,#264483,#264484); +#264482 = CARTESIAN_POINT('',(146.733147,-130.530557,0.)); +#264483 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#264484 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#264485 = ADVANCED_FACE('',(#264486),#264513,.T.); +#264486 = FACE_BOUND('',#264487,.F.); +#264487 = EDGE_LOOP('',(#264488,#264489,#264498,#264506)); +#264488 = ORIENTED_EDGE('',*,*,#264467,.T.); +#264489 = ORIENTED_EDGE('',*,*,#264490,.T.); +#264490 = EDGE_CURVE('',#264460,#264491,#264493,.T.); +#264491 = VERTEX_POINT('',#264492); +#264492 = CARTESIAN_POINT('',(146.366853,-130.619443,-3.5E-02)); +#264493 = CIRCLE('',#264494,0.10000001929); +#264494 = AXIS2_PLACEMENT_3D('',#264495,#264496,#264497); +#264495 = CARTESIAN_POINT('',(146.45,-130.675,-3.5E-02)); +#264496 = DIRECTION('',(0.,0.,-1.)); +#264497 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#264498 = ORIENTED_EDGE('',*,*,#264499,.F.); +#264499 = EDGE_CURVE('',#264500,#264491,#264502,.T.); +#264500 = VERTEX_POINT('',#264501); +#264501 = CARTESIAN_POINT('',(146.366853,-130.619443,0.)); +#264502 = LINE('',#264503,#264504); +#264503 = CARTESIAN_POINT('',(146.366853,-130.619443,0.)); +#264504 = VECTOR('',#264505,1.); +#264505 = DIRECTION('',(0.,0.,-1.)); +#264506 = ORIENTED_EDGE('',*,*,#264507,.F.); +#264507 = EDGE_CURVE('',#264468,#264500,#264508,.T.); +#264508 = CIRCLE('',#264509,0.10000001929); +#264509 = AXIS2_PLACEMENT_3D('',#264510,#264511,#264512); +#264510 = CARTESIAN_POINT('',(146.45,-130.675,0.)); +#264511 = DIRECTION('',(0.,0.,-1.)); +#264512 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#264513 = CYLINDRICAL_SURFACE('',#264514,0.10000001929); +#264514 = AXIS2_PLACEMENT_3D('',#264515,#264516,#264517); +#264515 = CARTESIAN_POINT('',(146.45,-130.675,0.)); +#264516 = DIRECTION('',(-0.,-0.,1.)); +#264517 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#264518 = ADVANCED_FACE('',(#264519),#264544,.F.); +#264519 = FACE_BOUND('',#264520,.F.); +#264520 = EDGE_LOOP('',(#264521,#264522,#264530,#264538)); +#264521 = ORIENTED_EDGE('',*,*,#264499,.T.); +#264522 = ORIENTED_EDGE('',*,*,#264523,.T.); +#264523 = EDGE_CURVE('',#264491,#264524,#264526,.T.); +#264524 = VERTEX_POINT('',#264525); +#264525 = CARTESIAN_POINT('',(146.55,-130.433578,-3.5E-02)); +#264526 = LINE('',#264527,#264528); +#264527 = CARTESIAN_POINT('',(146.366853,-130.619443,-3.5E-02)); +#264528 = VECTOR('',#264529,1.); +#264529 = DIRECTION('',(0.701879466471,0.712295735314,0.)); +#264530 = ORIENTED_EDGE('',*,*,#264531,.F.); +#264531 = EDGE_CURVE('',#264532,#264524,#264534,.T.); +#264532 = VERTEX_POINT('',#264533); +#264533 = CARTESIAN_POINT('',(146.55,-130.433578,0.)); +#264534 = LINE('',#264535,#264536); +#264535 = CARTESIAN_POINT('',(146.55,-130.433578,0.)); +#264536 = VECTOR('',#264537,1.); +#264537 = DIRECTION('',(0.,0.,-1.)); +#264538 = ORIENTED_EDGE('',*,*,#264539,.F.); +#264539 = EDGE_CURVE('',#264500,#264532,#264540,.T.); +#264540 = LINE('',#264541,#264542); +#264541 = CARTESIAN_POINT('',(146.366853,-130.619443,0.)); +#264542 = VECTOR('',#264543,1.); +#264543 = DIRECTION('',(0.701879466471,0.712295735314,0.)); +#264544 = PLANE('',#264545); +#264545 = AXIS2_PLACEMENT_3D('',#264546,#264547,#264548); +#264546 = CARTESIAN_POINT('',(146.366853,-130.619443,0.)); +#264547 = DIRECTION('',(0.712295735314,-0.701879466471,0.)); +#264548 = DIRECTION('',(0.701879466471,0.712295735314,0.)); +#264549 = ADVANCED_FACE('',(#264550),#264575,.F.); +#264550 = FACE_BOUND('',#264551,.F.); +#264551 = EDGE_LOOP('',(#264552,#264553,#264561,#264569)); +#264552 = ORIENTED_EDGE('',*,*,#264531,.T.); +#264553 = ORIENTED_EDGE('',*,*,#264554,.T.); +#264554 = EDGE_CURVE('',#264524,#264555,#264557,.T.); +#264555 = VERTEX_POINT('',#264556); +#264556 = CARTESIAN_POINT('',(146.55,-127.691422,-3.5E-02)); +#264557 = LINE('',#264558,#264559); +#264558 = CARTESIAN_POINT('',(146.55,-130.433578,-3.5E-02)); +#264559 = VECTOR('',#264560,1.); +#264560 = DIRECTION('',(0.,1.,0.)); +#264561 = ORIENTED_EDGE('',*,*,#264562,.F.); +#264562 = EDGE_CURVE('',#264563,#264555,#264565,.T.); +#264563 = VERTEX_POINT('',#264564); +#264564 = CARTESIAN_POINT('',(146.55,-127.691422,0.)); +#264565 = LINE('',#264566,#264567); +#264566 = CARTESIAN_POINT('',(146.55,-127.691422,0.)); +#264567 = VECTOR('',#264568,1.); +#264568 = DIRECTION('',(0.,0.,-1.)); +#264569 = ORIENTED_EDGE('',*,*,#264570,.F.); +#264570 = EDGE_CURVE('',#264532,#264563,#264571,.T.); +#264571 = LINE('',#264572,#264573); +#264572 = CARTESIAN_POINT('',(146.55,-130.433578,0.)); +#264573 = VECTOR('',#264574,1.); +#264574 = DIRECTION('',(0.,1.,0.)); +#264575 = PLANE('',#264576); +#264576 = AXIS2_PLACEMENT_3D('',#264577,#264578,#264579); +#264577 = CARTESIAN_POINT('',(146.55,-130.433578,0.)); +#264578 = DIRECTION('',(1.,-0.,0.)); +#264579 = DIRECTION('',(0.,1.,0.)); +#264580 = ADVANCED_FACE('',(#264581),#264606,.F.); +#264581 = FACE_BOUND('',#264582,.F.); +#264582 = EDGE_LOOP('',(#264583,#264584,#264592,#264600)); +#264583 = ORIENTED_EDGE('',*,*,#264562,.T.); +#264584 = ORIENTED_EDGE('',*,*,#264585,.T.); +#264585 = EDGE_CURVE('',#264555,#264586,#264588,.T.); +#264586 = VERTEX_POINT('',#264587); +#264587 = CARTESIAN_POINT('',(145.766853,-126.905557,-3.5E-02)); +#264588 = LINE('',#264589,#264590); +#264589 = CARTESIAN_POINT('',(146.55,-127.691422,-3.5E-02)); +#264590 = VECTOR('',#264591,1.); +#264591 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#264592 = ORIENTED_EDGE('',*,*,#264593,.F.); +#264593 = EDGE_CURVE('',#264594,#264586,#264596,.T.); +#264594 = VERTEX_POINT('',#264595); +#264595 = CARTESIAN_POINT('',(145.766853,-126.905557,0.)); +#264596 = LINE('',#264597,#264598); +#264597 = CARTESIAN_POINT('',(145.766853,-126.905557,0.)); +#264598 = VECTOR('',#264599,1.); +#264599 = DIRECTION('',(0.,0.,-1.)); +#264600 = ORIENTED_EDGE('',*,*,#264601,.F.); +#264601 = EDGE_CURVE('',#264563,#264594,#264602,.T.); +#264602 = LINE('',#264603,#264604); +#264603 = CARTESIAN_POINT('',(146.55,-127.691422,0.)); +#264604 = VECTOR('',#264605,1.); +#264605 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#264606 = PLANE('',#264607); +#264607 = AXIS2_PLACEMENT_3D('',#264608,#264609,#264610); +#264608 = CARTESIAN_POINT('',(146.55,-127.691422,0.)); +#264609 = DIRECTION('',(0.708330639693,0.705880800753,0.)); +#264610 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#264611 = ADVANCED_FACE('',(#264612),#264639,.T.); +#264612 = FACE_BOUND('',#264613,.F.); +#264613 = EDGE_LOOP('',(#264614,#264615,#264624,#264632)); +#264614 = ORIENTED_EDGE('',*,*,#264593,.T.); +#264615 = ORIENTED_EDGE('',*,*,#264616,.T.); +#264616 = EDGE_CURVE('',#264586,#264617,#264619,.T.); +#264617 = VERTEX_POINT('',#264618); +#264618 = CARTESIAN_POINT('',(145.905557,-126.766853,-3.5E-02)); +#264619 = CIRCLE('',#264620,9.999988522644E-02); +#264620 = AXIS2_PLACEMENT_3D('',#264621,#264622,#264623); +#264621 = CARTESIAN_POINT('',(145.84999951407,-126.849999514,-3.5E-02)); +#264622 = DIRECTION('',(0.,0.,-1.)); +#264623 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#264624 = ORIENTED_EDGE('',*,*,#264625,.F.); +#264625 = EDGE_CURVE('',#264626,#264617,#264628,.T.); +#264626 = VERTEX_POINT('',#264627); +#264627 = CARTESIAN_POINT('',(145.905557,-126.766853,0.)); +#264628 = LINE('',#264629,#264630); +#264629 = CARTESIAN_POINT('',(145.905557,-126.766853,0.)); +#264630 = VECTOR('',#264631,1.); +#264631 = DIRECTION('',(0.,0.,-1.)); +#264632 = ORIENTED_EDGE('',*,*,#264633,.F.); +#264633 = EDGE_CURVE('',#264594,#264626,#264634,.T.); +#264634 = CIRCLE('',#264635,9.999988522644E-02); +#264635 = AXIS2_PLACEMENT_3D('',#264636,#264637,#264638); +#264636 = CARTESIAN_POINT('',(145.84999951407,-126.849999514,0.)); +#264637 = DIRECTION('',(0.,0.,-1.)); +#264638 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#264639 = CYLINDRICAL_SURFACE('',#264640,9.999988522644E-02); +#264640 = AXIS2_PLACEMENT_3D('',#264641,#264642,#264643); +#264641 = CARTESIAN_POINT('',(145.84999951407,-126.849999514,0.)); +#264642 = DIRECTION('',(-0.,-0.,1.)); +#264643 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#264644 = ADVANCED_FACE('',(#264645),#264661,.F.); +#264645 = FACE_BOUND('',#264646,.F.); +#264646 = EDGE_LOOP('',(#264647,#264648,#264654,#264655)); +#264647 = ORIENTED_EDGE('',*,*,#264625,.T.); +#264648 = ORIENTED_EDGE('',*,*,#264649,.T.); +#264649 = EDGE_CURVE('',#264617,#264359,#264650,.T.); +#264650 = LINE('',#264651,#264652); +#264651 = CARTESIAN_POINT('',(145.905557,-126.766853,-3.5E-02)); +#264652 = VECTOR('',#264653,1.); +#264653 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#264654 = ORIENTED_EDGE('',*,*,#264356,.F.); +#264655 = ORIENTED_EDGE('',*,*,#264656,.F.); +#264656 = EDGE_CURVE('',#264626,#264357,#264657,.T.); +#264657 = LINE('',#264658,#264659); +#264658 = CARTESIAN_POINT('',(145.905557,-126.766853,0.)); +#264659 = VECTOR('',#264660,1.); +#264660 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#264661 = PLANE('',#264662); +#264662 = AXIS2_PLACEMENT_3D('',#264663,#264664,#264665); +#264663 = CARTESIAN_POINT('',(145.905557,-126.766853,0.)); +#264664 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#264665 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#264666 = ADVANCED_FACE('',(#264667),#264679,.F.); +#264667 = FACE_BOUND('',#264668,.F.); +#264668 = EDGE_LOOP('',(#264669,#264670,#264671,#264672,#264673,#264674, + #264675,#264676,#264677,#264678)); +#264669 = ORIENTED_EDGE('',*,*,#264382,.T.); +#264670 = ORIENTED_EDGE('',*,*,#264413,.T.); +#264671 = ORIENTED_EDGE('',*,*,#264444,.T.); +#264672 = ORIENTED_EDGE('',*,*,#264475,.T.); +#264673 = ORIENTED_EDGE('',*,*,#264507,.T.); +#264674 = ORIENTED_EDGE('',*,*,#264539,.T.); +#264675 = ORIENTED_EDGE('',*,*,#264570,.T.); +#264676 = ORIENTED_EDGE('',*,*,#264601,.T.); +#264677 = ORIENTED_EDGE('',*,*,#264633,.T.); +#264678 = ORIENTED_EDGE('',*,*,#264656,.T.); +#264679 = PLANE('',#264680); +#264680 = AXIS2_PLACEMENT_3D('',#264681,#264682,#264683); +#264681 = CARTESIAN_POINT('',(0.,0.,0.)); +#264682 = DIRECTION('',(-0.,-0.,-1.)); +#264683 = DIRECTION('',(-1.,0.,0.)); +#264684 = ADVANCED_FACE('',(#264685),#264697,.T.); +#264685 = FACE_BOUND('',#264686,.T.); +#264686 = EDGE_LOOP('',(#264687,#264688,#264689,#264690,#264691,#264692, + #264693,#264694,#264695,#264696)); +#264687 = ORIENTED_EDGE('',*,*,#264366,.T.); +#264688 = ORIENTED_EDGE('',*,*,#264397,.T.); +#264689 = ORIENTED_EDGE('',*,*,#264428,.T.); +#264690 = ORIENTED_EDGE('',*,*,#264459,.T.); +#264691 = ORIENTED_EDGE('',*,*,#264490,.T.); +#264692 = ORIENTED_EDGE('',*,*,#264523,.T.); +#264693 = ORIENTED_EDGE('',*,*,#264554,.T.); +#264694 = ORIENTED_EDGE('',*,*,#264585,.T.); +#264695 = ORIENTED_EDGE('',*,*,#264616,.T.); +#264696 = ORIENTED_EDGE('',*,*,#264649,.T.); +#264697 = PLANE('',#264698); +#264698 = AXIS2_PLACEMENT_3D('',#264699,#264700,#264701); +#264699 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#264700 = DIRECTION('',(-0.,-0.,-1.)); +#264701 = DIRECTION('',(-1.,0.,0.)); +#264702 = MANIFOLD_SOLID_BREP('',#264703); +#264703 = CLOSED_SHELL('',(#264704,#264744,#264775,#264806,#264839, + #264870,#264903,#264934,#264965,#264998,#265029,#265060,#265093, + #265115,#265136)); +#264704 = ADVANCED_FACE('',(#264705),#264739,.F.); +#264705 = FACE_BOUND('',#264706,.F.); +#264706 = EDGE_LOOP('',(#264707,#264717,#264725,#264733)); +#264707 = ORIENTED_EDGE('',*,*,#264708,.T.); +#264708 = EDGE_CURVE('',#264709,#264711,#264713,.T.); +#264709 = VERTEX_POINT('',#264710); +#264710 = CARTESIAN_POINT('',(149.408147,-127.444443,0.)); +#264711 = VERTEX_POINT('',#264712); +#264712 = CARTESIAN_POINT('',(149.408147,-127.444443,-3.5E-02)); +#264713 = LINE('',#264714,#264715); +#264714 = CARTESIAN_POINT('',(149.408147,-127.444443,0.)); +#264715 = VECTOR('',#264716,1.); +#264716 = DIRECTION('',(0.,0.,-1.)); +#264717 = ORIENTED_EDGE('',*,*,#264718,.T.); +#264718 = EDGE_CURVE('',#264711,#264719,#264721,.T.); +#264719 = VERTEX_POINT('',#264720); +#264720 = CARTESIAN_POINT('',(149.423079,-127.480491,-3.5E-02)); +#264721 = LINE('',#264722,#264723); +#264722 = CARTESIAN_POINT('',(149.408147,-127.444443,-3.5E-02)); +#264723 = VECTOR('',#264724,1.); +#264724 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264725 = ORIENTED_EDGE('',*,*,#264726,.F.); +#264726 = EDGE_CURVE('',#264727,#264719,#264729,.T.); +#264727 = VERTEX_POINT('',#264728); +#264728 = CARTESIAN_POINT('',(149.423079,-127.480491,0.)); +#264729 = LINE('',#264730,#264731); +#264730 = CARTESIAN_POINT('',(149.423079,-127.480491,0.)); +#264731 = VECTOR('',#264732,1.); +#264732 = DIRECTION('',(0.,0.,-1.)); +#264733 = ORIENTED_EDGE('',*,*,#264734,.F.); +#264734 = EDGE_CURVE('',#264709,#264727,#264735,.T.); +#264735 = LINE('',#264736,#264737); +#264736 = CARTESIAN_POINT('',(149.408147,-127.444443,0.)); +#264737 = VECTOR('',#264738,1.); +#264738 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264739 = PLANE('',#264740); +#264740 = AXIS2_PLACEMENT_3D('',#264741,#264742,#264743); +#264741 = CARTESIAN_POINT('',(149.408147,-127.444443,0.)); +#264742 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#264743 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#264744 = ADVANCED_FACE('',(#264745),#264770,.F.); +#264745 = FACE_BOUND('',#264746,.F.); +#264746 = EDGE_LOOP('',(#264747,#264748,#264756,#264764)); +#264747 = ORIENTED_EDGE('',*,*,#264726,.T.); +#264748 = ORIENTED_EDGE('',*,*,#264749,.T.); +#264749 = EDGE_CURVE('',#264719,#264750,#264752,.T.); +#264750 = VERTEX_POINT('',#264751); +#264751 = CARTESIAN_POINT('',(149.425,-128.35,-3.5E-02)); +#264752 = LINE('',#264753,#264754); +#264753 = CARTESIAN_POINT('',(149.423079,-127.480491,-3.5E-02)); +#264754 = VECTOR('',#264755,1.); +#264755 = DIRECTION('',(2.209287439061E-03,-0.999997559522,0.)); +#264756 = ORIENTED_EDGE('',*,*,#264757,.F.); +#264757 = EDGE_CURVE('',#264758,#264750,#264760,.T.); +#264758 = VERTEX_POINT('',#264759); +#264759 = CARTESIAN_POINT('',(149.425,-128.35,0.)); +#264760 = LINE('',#264761,#264762); +#264761 = CARTESIAN_POINT('',(149.425,-128.35,0.)); +#264762 = VECTOR('',#264763,1.); +#264763 = DIRECTION('',(0.,0.,-1.)); +#264764 = ORIENTED_EDGE('',*,*,#264765,.F.); +#264765 = EDGE_CURVE('',#264727,#264758,#264766,.T.); +#264766 = LINE('',#264767,#264768); +#264767 = CARTESIAN_POINT('',(149.423079,-127.480491,0.)); +#264768 = VECTOR('',#264769,1.); +#264769 = DIRECTION('',(2.209287439061E-03,-0.999997559522,0.)); +#264770 = PLANE('',#264771); +#264771 = AXIS2_PLACEMENT_3D('',#264772,#264773,#264774); +#264772 = CARTESIAN_POINT('',(149.423079,-127.480491,0.)); +#264773 = DIRECTION('',(-0.999997559522,-2.209287439061E-03,-0.)); +#264774 = DIRECTION('',(2.209287439061E-03,-0.999997559522,0.)); +#264775 = ADVANCED_FACE('',(#264776),#264801,.F.); +#264776 = FACE_BOUND('',#264777,.F.); +#264777 = EDGE_LOOP('',(#264778,#264779,#264787,#264795)); +#264778 = ORIENTED_EDGE('',*,*,#264757,.T.); +#264779 = ORIENTED_EDGE('',*,*,#264780,.T.); +#264780 = EDGE_CURVE('',#264750,#264781,#264783,.T.); +#264781 = VERTEX_POINT('',#264782); +#264782 = CARTESIAN_POINT('',(150.269509,-128.351921,-3.5E-02)); +#264783 = LINE('',#264784,#264785); +#264784 = CARTESIAN_POINT('',(149.425,-128.35,-3.5E-02)); +#264785 = VECTOR('',#264786,1.); +#264786 = DIRECTION('',(0.999997412892,-2.274688641775E-03,0.)); +#264787 = ORIENTED_EDGE('',*,*,#264788,.F.); +#264788 = EDGE_CURVE('',#264789,#264781,#264791,.T.); +#264789 = VERTEX_POINT('',#264790); +#264790 = CARTESIAN_POINT('',(150.269509,-128.351921,0.)); +#264791 = LINE('',#264792,#264793); +#264792 = CARTESIAN_POINT('',(150.269509,-128.351921,0.)); +#264793 = VECTOR('',#264794,1.); +#264794 = DIRECTION('',(0.,0.,-1.)); +#264795 = ORIENTED_EDGE('',*,*,#264796,.F.); +#264796 = EDGE_CURVE('',#264758,#264789,#264797,.T.); +#264797 = LINE('',#264798,#264799); +#264798 = CARTESIAN_POINT('',(149.425,-128.35,0.)); +#264799 = VECTOR('',#264800,1.); +#264800 = DIRECTION('',(0.999997412892,-2.274688641775E-03,0.)); +#264801 = PLANE('',#264802); +#264802 = AXIS2_PLACEMENT_3D('',#264803,#264804,#264805); +#264803 = CARTESIAN_POINT('',(149.425,-128.35,0.)); +#264804 = DIRECTION('',(-2.274688641775E-03,-0.999997412892,-0.)); +#264805 = DIRECTION('',(0.999997412892,-2.274688641775E-03,0.)); +#264806 = ADVANCED_FACE('',(#264807),#264834,.T.); +#264807 = FACE_BOUND('',#264808,.F.); +#264808 = EDGE_LOOP('',(#264809,#264810,#264819,#264827)); +#264809 = ORIENTED_EDGE('',*,*,#264788,.T.); +#264810 = ORIENTED_EDGE('',*,*,#264811,.T.); +#264811 = EDGE_CURVE('',#264781,#264812,#264814,.T.); +#264812 = VERTEX_POINT('',#264813); +#264813 = CARTESIAN_POINT('',(150.348079,-128.430491,-3.5E-02)); +#264814 = CIRCLE('',#264815,0.100002891901); +#264815 = AXIS2_PLACEMENT_3D('',#264816,#264817,#264818); +#264816 = CARTESIAN_POINT('',(150.24999792896,-128.450002071,-3.5E-02)); +#264817 = DIRECTION('',(0.,0.,-1.)); +#264818 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#264819 = ORIENTED_EDGE('',*,*,#264820,.F.); +#264820 = EDGE_CURVE('',#264821,#264812,#264823,.T.); +#264821 = VERTEX_POINT('',#264822); +#264822 = CARTESIAN_POINT('',(150.348079,-128.430491,0.)); +#264823 = LINE('',#264824,#264825); +#264824 = CARTESIAN_POINT('',(150.348079,-128.430491,0.)); +#264825 = VECTOR('',#264826,1.); +#264826 = DIRECTION('',(0.,0.,-1.)); +#264827 = ORIENTED_EDGE('',*,*,#264828,.F.); +#264828 = EDGE_CURVE('',#264789,#264821,#264829,.T.); +#264829 = CIRCLE('',#264830,0.100002891901); +#264830 = AXIS2_PLACEMENT_3D('',#264831,#264832,#264833); +#264831 = CARTESIAN_POINT('',(150.24999792896,-128.450002071,0.)); +#264832 = DIRECTION('',(0.,0.,-1.)); +#264833 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#264834 = CYLINDRICAL_SURFACE('',#264835,0.100002891901); +#264835 = AXIS2_PLACEMENT_3D('',#264836,#264837,#264838); +#264836 = CARTESIAN_POINT('',(150.24999792896,-128.450002071,0.)); +#264837 = DIRECTION('',(-0.,-0.,1.)); +#264838 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#264839 = ADVANCED_FACE('',(#264840),#264865,.F.); +#264840 = FACE_BOUND('',#264841,.F.); +#264841 = EDGE_LOOP('',(#264842,#264843,#264851,#264859)); +#264842 = ORIENTED_EDGE('',*,*,#264820,.T.); +#264843 = ORIENTED_EDGE('',*,*,#264844,.T.); +#264844 = EDGE_CURVE('',#264812,#264845,#264847,.T.); +#264845 = VERTEX_POINT('',#264846); +#264846 = CARTESIAN_POINT('',(150.348079,-130.659509,-3.5E-02)); +#264847 = LINE('',#264848,#264849); +#264848 = CARTESIAN_POINT('',(150.348079,-128.430491,-3.5E-02)); +#264849 = VECTOR('',#264850,1.); +#264850 = DIRECTION('',(0.,-1.,0.)); +#264851 = ORIENTED_EDGE('',*,*,#264852,.F.); +#264852 = EDGE_CURVE('',#264853,#264845,#264855,.T.); +#264853 = VERTEX_POINT('',#264854); +#264854 = CARTESIAN_POINT('',(150.348079,-130.659509,0.)); +#264855 = LINE('',#264856,#264857); +#264856 = CARTESIAN_POINT('',(150.348079,-130.659509,0.)); +#264857 = VECTOR('',#264858,1.); +#264858 = DIRECTION('',(0.,0.,-1.)); +#264859 = ORIENTED_EDGE('',*,*,#264860,.F.); +#264860 = EDGE_CURVE('',#264821,#264853,#264861,.T.); +#264861 = LINE('',#264862,#264863); +#264862 = CARTESIAN_POINT('',(150.348079,-128.430491,0.)); +#264863 = VECTOR('',#264864,1.); +#264864 = DIRECTION('',(0.,-1.,0.)); +#264865 = PLANE('',#264866); +#264866 = AXIS2_PLACEMENT_3D('',#264867,#264868,#264869); +#264867 = CARTESIAN_POINT('',(150.348079,-128.430491,0.)); +#264868 = DIRECTION('',(-1.,-0.,-0.)); +#264869 = DIRECTION('',(0.,-1.,0.)); +#264870 = ADVANCED_FACE('',(#264871),#264898,.T.); +#264871 = FACE_BOUND('',#264872,.F.); +#264872 = EDGE_LOOP('',(#264873,#264874,#264883,#264891)); +#264873 = ORIENTED_EDGE('',*,*,#264852,.T.); +#264874 = ORIENTED_EDGE('',*,*,#264875,.T.); +#264875 = EDGE_CURVE('',#264845,#264876,#264878,.T.); +#264876 = VERTEX_POINT('',#264877); +#264877 = CARTESIAN_POINT('',(150.151921,-130.659509,-3.5E-02)); +#264878 = CIRCLE('',#264879,0.100000456609); +#264879 = AXIS2_PLACEMENT_3D('',#264880,#264881,#264882); +#264880 = CARTESIAN_POINT('',(150.25,-130.64,-3.5E-02)); +#264881 = DIRECTION('',(-0.,0.,-1.)); +#264882 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#264883 = ORIENTED_EDGE('',*,*,#264884,.F.); +#264884 = EDGE_CURVE('',#264885,#264876,#264887,.T.); +#264885 = VERTEX_POINT('',#264886); +#264886 = CARTESIAN_POINT('',(150.151921,-130.659509,0.)); +#264887 = LINE('',#264888,#264889); +#264888 = CARTESIAN_POINT('',(150.151921,-130.659509,0.)); +#264889 = VECTOR('',#264890,1.); +#264890 = DIRECTION('',(0.,0.,-1.)); +#264891 = ORIENTED_EDGE('',*,*,#264892,.F.); +#264892 = EDGE_CURVE('',#264853,#264885,#264893,.T.); +#264893 = CIRCLE('',#264894,0.100000456609); +#264894 = AXIS2_PLACEMENT_3D('',#264895,#264896,#264897); +#264895 = CARTESIAN_POINT('',(150.25,-130.64,0.)); +#264896 = DIRECTION('',(-0.,0.,-1.)); +#264897 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#264898 = CYLINDRICAL_SURFACE('',#264899,0.100000456609); +#264899 = AXIS2_PLACEMENT_3D('',#264900,#264901,#264902); +#264900 = CARTESIAN_POINT('',(150.25,-130.64,0.)); +#264901 = DIRECTION('',(0.,-0.,1.)); +#264902 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#264903 = ADVANCED_FACE('',(#264904),#264929,.F.); +#264904 = FACE_BOUND('',#264905,.F.); +#264905 = EDGE_LOOP('',(#264906,#264907,#264915,#264923)); +#264906 = ORIENTED_EDGE('',*,*,#264884,.T.); +#264907 = ORIENTED_EDGE('',*,*,#264908,.T.); +#264908 = EDGE_CURVE('',#264876,#264909,#264911,.T.); +#264909 = VERTEX_POINT('',#264910); +#264910 = CARTESIAN_POINT('',(150.15,-128.55,-3.5E-02)); +#264911 = LINE('',#264912,#264913); +#264912 = CARTESIAN_POINT('',(150.151921,-130.659509,-3.5E-02)); +#264913 = VECTOR('',#264914,1.); +#264914 = DIRECTION('',(-9.106380695582E-04,0.999999585369,0.)); +#264915 = ORIENTED_EDGE('',*,*,#264916,.F.); +#264916 = EDGE_CURVE('',#264917,#264909,#264919,.T.); +#264917 = VERTEX_POINT('',#264918); +#264918 = CARTESIAN_POINT('',(150.15,-128.55,0.)); +#264919 = LINE('',#264920,#264921); +#264920 = CARTESIAN_POINT('',(150.15,-128.55,0.)); +#264921 = VECTOR('',#264922,1.); +#264922 = DIRECTION('',(0.,0.,-1.)); +#264923 = ORIENTED_EDGE('',*,*,#264924,.F.); +#264924 = EDGE_CURVE('',#264885,#264917,#264925,.T.); +#264925 = LINE('',#264926,#264927); +#264926 = CARTESIAN_POINT('',(150.151921,-130.659509,0.)); +#264927 = VECTOR('',#264928,1.); +#264928 = DIRECTION('',(-9.106380695582E-04,0.999999585369,0.)); +#264929 = PLANE('',#264930); +#264930 = AXIS2_PLACEMENT_3D('',#264931,#264932,#264933); +#264931 = CARTESIAN_POINT('',(150.151921,-130.659509,0.)); +#264932 = DIRECTION('',(0.999999585369,9.106380695582E-04,0.)); +#264933 = DIRECTION('',(-9.106380695582E-04,0.999999585369,0.)); +#264934 = ADVANCED_FACE('',(#264935),#264960,.F.); +#264935 = FACE_BOUND('',#264936,.F.); +#264936 = EDGE_LOOP('',(#264937,#264938,#264946,#264954)); +#264937 = ORIENTED_EDGE('',*,*,#264916,.T.); +#264938 = ORIENTED_EDGE('',*,*,#264939,.T.); +#264939 = EDGE_CURVE('',#264909,#264940,#264942,.T.); +#264940 = VERTEX_POINT('',#264941); +#264941 = CARTESIAN_POINT('',(149.305491,-128.548079,-3.5E-02)); +#264942 = LINE('',#264943,#264944); +#264943 = CARTESIAN_POINT('',(150.15,-128.55,-3.5E-02)); +#264944 = VECTOR('',#264945,1.); +#264945 = DIRECTION('',(-0.999997412892,2.274688641775E-03,0.)); +#264946 = ORIENTED_EDGE('',*,*,#264947,.F.); +#264947 = EDGE_CURVE('',#264948,#264940,#264950,.T.); +#264948 = VERTEX_POINT('',#264949); +#264949 = CARTESIAN_POINT('',(149.305491,-128.548079,0.)); +#264950 = LINE('',#264951,#264952); +#264951 = CARTESIAN_POINT('',(149.305491,-128.548079,0.)); +#264952 = VECTOR('',#264953,1.); +#264953 = DIRECTION('',(0.,0.,-1.)); +#264954 = ORIENTED_EDGE('',*,*,#264955,.F.); +#264955 = EDGE_CURVE('',#264917,#264948,#264956,.T.); +#264956 = LINE('',#264957,#264958); +#264957 = CARTESIAN_POINT('',(150.15,-128.55,0.)); +#264958 = VECTOR('',#264959,1.); +#264959 = DIRECTION('',(-0.999997412892,2.274688641775E-03,0.)); +#264960 = PLANE('',#264961); +#264961 = AXIS2_PLACEMENT_3D('',#264962,#264963,#264964); +#264962 = CARTESIAN_POINT('',(150.15,-128.55,0.)); +#264963 = DIRECTION('',(2.274688641775E-03,0.999997412892,0.)); +#264964 = DIRECTION('',(-0.999997412892,2.274688641775E-03,0.)); +#264965 = ADVANCED_FACE('',(#264966),#264993,.T.); +#264966 = FACE_BOUND('',#264967,.F.); +#264967 = EDGE_LOOP('',(#264968,#264969,#264978,#264986)); +#264968 = ORIENTED_EDGE('',*,*,#264947,.T.); +#264969 = ORIENTED_EDGE('',*,*,#264970,.T.); +#264970 = EDGE_CURVE('',#264940,#264971,#264973,.T.); +#264971 = VERTEX_POINT('',#264972); +#264972 = CARTESIAN_POINT('',(149.226921,-128.469509,-3.5E-02)); +#264973 = CIRCLE('',#264974,0.100002891901); +#264974 = AXIS2_PLACEMENT_3D('',#264975,#264976,#264977); +#264975 = CARTESIAN_POINT('',(149.32500207103,-128.4499979289,-3.5E-02) + ); +#264976 = DIRECTION('',(0.,0.,-1.)); +#264977 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#264978 = ORIENTED_EDGE('',*,*,#264979,.F.); +#264979 = EDGE_CURVE('',#264980,#264971,#264982,.T.); +#264980 = VERTEX_POINT('',#264981); +#264981 = CARTESIAN_POINT('',(149.226921,-128.469509,0.)); +#264982 = LINE('',#264983,#264984); +#264983 = CARTESIAN_POINT('',(149.226921,-128.469509,0.)); +#264984 = VECTOR('',#264985,1.); +#264985 = DIRECTION('',(0.,0.,-1.)); +#264986 = ORIENTED_EDGE('',*,*,#264987,.F.); +#264987 = EDGE_CURVE('',#264948,#264980,#264988,.T.); +#264988 = CIRCLE('',#264989,0.100002891901); +#264989 = AXIS2_PLACEMENT_3D('',#264990,#264991,#264992); +#264990 = CARTESIAN_POINT('',(149.32500207103,-128.4499979289,0.)); +#264991 = DIRECTION('',(0.,0.,-1.)); +#264992 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#264993 = CYLINDRICAL_SURFACE('',#264994,0.100002891901); +#264994 = AXIS2_PLACEMENT_3D('',#264995,#264996,#264997); +#264995 = CARTESIAN_POINT('',(149.32500207103,-128.4499979289,0.)); +#264996 = DIRECTION('',(-0.,-0.,1.)); +#264997 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#264998 = ADVANCED_FACE('',(#264999),#265024,.F.); +#264999 = FACE_BOUND('',#265000,.F.); +#265000 = EDGE_LOOP('',(#265001,#265002,#265010,#265018)); +#265001 = ORIENTED_EDGE('',*,*,#264979,.T.); +#265002 = ORIENTED_EDGE('',*,*,#265003,.T.); +#265003 = EDGE_CURVE('',#264971,#265004,#265006,.T.); +#265004 = VERTEX_POINT('',#265005); +#265005 = CARTESIAN_POINT('',(149.225,-127.541421,-3.5E-02)); +#265006 = LINE('',#265007,#265008); +#265007 = CARTESIAN_POINT('',(149.226921,-128.469509,-3.5E-02)); +#265008 = VECTOR('',#265009,1.); +#265009 = DIRECTION('',(-2.069842391008E-03,0.999997857874,0.)); +#265010 = ORIENTED_EDGE('',*,*,#265011,.F.); +#265011 = EDGE_CURVE('',#265012,#265004,#265014,.T.); +#265012 = VERTEX_POINT('',#265013); +#265013 = CARTESIAN_POINT('',(149.225,-127.541421,0.)); +#265014 = LINE('',#265015,#265016); +#265015 = CARTESIAN_POINT('',(149.225,-127.541421,0.)); +#265016 = VECTOR('',#265017,1.); +#265017 = DIRECTION('',(0.,0.,-1.)); +#265018 = ORIENTED_EDGE('',*,*,#265019,.F.); +#265019 = EDGE_CURVE('',#264980,#265012,#265020,.T.); +#265020 = LINE('',#265021,#265022); +#265021 = CARTESIAN_POINT('',(149.226921,-128.469509,0.)); +#265022 = VECTOR('',#265023,1.); +#265023 = DIRECTION('',(-2.069842391008E-03,0.999997857874,0.)); +#265024 = PLANE('',#265025); +#265025 = AXIS2_PLACEMENT_3D('',#265026,#265027,#265028); +#265026 = CARTESIAN_POINT('',(149.226921,-128.469509,0.)); +#265027 = DIRECTION('',(0.999997857874,2.069842391008E-03,0.)); +#265028 = DIRECTION('',(-2.069842391008E-03,0.999997857874,0.)); +#265029 = ADVANCED_FACE('',(#265030),#265055,.F.); +#265030 = FACE_BOUND('',#265031,.F.); +#265031 = EDGE_LOOP('',(#265032,#265033,#265041,#265049)); +#265032 = ORIENTED_EDGE('',*,*,#265011,.T.); +#265033 = ORIENTED_EDGE('',*,*,#265034,.T.); +#265034 = EDGE_CURVE('',#265004,#265035,#265037,.T.); +#265035 = VERTEX_POINT('',#265036); +#265036 = CARTESIAN_POINT('',(147.641853,-125.955557,-3.5E-02)); +#265037 = LINE('',#265038,#265039); +#265038 = CARTESIAN_POINT('',(149.225,-127.541421,-3.5E-02)); +#265039 = VECTOR('',#265040,1.); +#265040 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#265041 = ORIENTED_EDGE('',*,*,#265042,.F.); +#265042 = EDGE_CURVE('',#265043,#265035,#265045,.T.); +#265043 = VERTEX_POINT('',#265044); +#265044 = CARTESIAN_POINT('',(147.641853,-125.955557,0.)); +#265045 = LINE('',#265046,#265047); +#265046 = CARTESIAN_POINT('',(147.641853,-125.955557,0.)); +#265047 = VECTOR('',#265048,1.); +#265048 = DIRECTION('',(0.,0.,-1.)); +#265049 = ORIENTED_EDGE('',*,*,#265050,.F.); +#265050 = EDGE_CURVE('',#265012,#265043,#265051,.T.); +#265051 = LINE('',#265052,#265053); +#265052 = CARTESIAN_POINT('',(149.225,-127.541421,0.)); +#265053 = VECTOR('',#265054,1.); +#265054 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#265055 = PLANE('',#265056); +#265056 = AXIS2_PLACEMENT_3D('',#265057,#265058,#265059); +#265057 = CARTESIAN_POINT('',(149.225,-127.541421,0.)); +#265058 = DIRECTION('',(0.707712769878,0.706500272718,0.)); +#265059 = DIRECTION('',(-0.706500272718,0.707712769878,0.)); +#265060 = ADVANCED_FACE('',(#265061),#265088,.T.); +#265061 = FACE_BOUND('',#265062,.F.); +#265062 = EDGE_LOOP('',(#265063,#265064,#265073,#265081)); +#265063 = ORIENTED_EDGE('',*,*,#265042,.T.); +#265064 = ORIENTED_EDGE('',*,*,#265065,.T.); +#265065 = EDGE_CURVE('',#265035,#265066,#265068,.T.); +#265066 = VERTEX_POINT('',#265067); +#265067 = CARTESIAN_POINT('',(147.780557,-125.816853,-3.5E-02)); +#265068 = CIRCLE('',#265069,9.999988522644E-02); +#265069 = AXIS2_PLACEMENT_3D('',#265070,#265071,#265072); +#265070 = CARTESIAN_POINT('',(147.72499951407,-125.899999514,-3.5E-02)); +#265071 = DIRECTION('',(0.,0.,-1.)); +#265072 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#265073 = ORIENTED_EDGE('',*,*,#265074,.F.); +#265074 = EDGE_CURVE('',#265075,#265066,#265077,.T.); +#265075 = VERTEX_POINT('',#265076); +#265076 = CARTESIAN_POINT('',(147.780557,-125.816853,0.)); +#265077 = LINE('',#265078,#265079); +#265078 = CARTESIAN_POINT('',(147.780557,-125.816853,0.)); +#265079 = VECTOR('',#265080,1.); +#265080 = DIRECTION('',(0.,0.,-1.)); +#265081 = ORIENTED_EDGE('',*,*,#265082,.F.); +#265082 = EDGE_CURVE('',#265043,#265075,#265083,.T.); +#265083 = CIRCLE('',#265084,9.999988522644E-02); +#265084 = AXIS2_PLACEMENT_3D('',#265085,#265086,#265087); +#265085 = CARTESIAN_POINT('',(147.72499951407,-125.899999514,0.)); +#265086 = DIRECTION('',(0.,0.,-1.)); +#265087 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#265088 = CYLINDRICAL_SURFACE('',#265089,9.999988522644E-02); +#265089 = AXIS2_PLACEMENT_3D('',#265090,#265091,#265092); +#265090 = CARTESIAN_POINT('',(147.72499951407,-125.899999514,0.)); +#265091 = DIRECTION('',(-0.,-0.,1.)); +#265092 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#265093 = ADVANCED_FACE('',(#265094),#265110,.F.); +#265094 = FACE_BOUND('',#265095,.F.); +#265095 = EDGE_LOOP('',(#265096,#265097,#265103,#265104)); +#265096 = ORIENTED_EDGE('',*,*,#265074,.T.); +#265097 = ORIENTED_EDGE('',*,*,#265098,.T.); +#265098 = EDGE_CURVE('',#265066,#264711,#265099,.T.); +#265099 = LINE('',#265100,#265101); +#265100 = CARTESIAN_POINT('',(147.780557,-125.816853,-3.5E-02)); +#265101 = VECTOR('',#265102,1.); +#265102 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#265103 = ORIENTED_EDGE('',*,*,#264708,.F.); +#265104 = ORIENTED_EDGE('',*,*,#265105,.F.); +#265105 = EDGE_CURVE('',#265075,#264709,#265106,.T.); +#265106 = LINE('',#265107,#265108); +#265107 = CARTESIAN_POINT('',(147.780557,-125.816853,0.)); +#265108 = VECTOR('',#265109,1.); +#265109 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#265110 = PLANE('',#265111); +#265111 = AXIS2_PLACEMENT_3D('',#265112,#265113,#265114); +#265112 = CARTESIAN_POINT('',(147.780557,-125.816853,0.)); +#265113 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#265114 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#265115 = ADVANCED_FACE('',(#265116),#265131,.F.); +#265116 = FACE_BOUND('',#265117,.F.); +#265117 = EDGE_LOOP('',(#265118,#265119,#265120,#265121,#265122,#265123, + #265124,#265125,#265126,#265127,#265128,#265129,#265130)); +#265118 = ORIENTED_EDGE('',*,*,#264734,.T.); +#265119 = ORIENTED_EDGE('',*,*,#264765,.T.); +#265120 = ORIENTED_EDGE('',*,*,#264796,.T.); +#265121 = ORIENTED_EDGE('',*,*,#264828,.T.); +#265122 = ORIENTED_EDGE('',*,*,#264860,.T.); +#265123 = ORIENTED_EDGE('',*,*,#264892,.T.); +#265124 = ORIENTED_EDGE('',*,*,#264924,.T.); +#265125 = ORIENTED_EDGE('',*,*,#264955,.T.); +#265126 = ORIENTED_EDGE('',*,*,#264987,.T.); +#265127 = ORIENTED_EDGE('',*,*,#265019,.T.); +#265128 = ORIENTED_EDGE('',*,*,#265050,.T.); +#265129 = ORIENTED_EDGE('',*,*,#265082,.T.); +#265130 = ORIENTED_EDGE('',*,*,#265105,.T.); +#265131 = PLANE('',#265132); +#265132 = AXIS2_PLACEMENT_3D('',#265133,#265134,#265135); +#265133 = CARTESIAN_POINT('',(0.,0.,0.)); +#265134 = DIRECTION('',(-0.,-0.,-1.)); +#265135 = DIRECTION('',(-1.,0.,0.)); +#265136 = ADVANCED_FACE('',(#265137),#265152,.T.); +#265137 = FACE_BOUND('',#265138,.T.); +#265138 = EDGE_LOOP('',(#265139,#265140,#265141,#265142,#265143,#265144, + #265145,#265146,#265147,#265148,#265149,#265150,#265151)); +#265139 = ORIENTED_EDGE('',*,*,#264718,.T.); +#265140 = ORIENTED_EDGE('',*,*,#264749,.T.); +#265141 = ORIENTED_EDGE('',*,*,#264780,.T.); +#265142 = ORIENTED_EDGE('',*,*,#264811,.T.); +#265143 = ORIENTED_EDGE('',*,*,#264844,.T.); +#265144 = ORIENTED_EDGE('',*,*,#264875,.T.); +#265145 = ORIENTED_EDGE('',*,*,#264908,.T.); +#265146 = ORIENTED_EDGE('',*,*,#264939,.T.); +#265147 = ORIENTED_EDGE('',*,*,#264970,.T.); +#265148 = ORIENTED_EDGE('',*,*,#265003,.T.); +#265149 = ORIENTED_EDGE('',*,*,#265034,.T.); +#265150 = ORIENTED_EDGE('',*,*,#265065,.T.); +#265151 = ORIENTED_EDGE('',*,*,#265098,.T.); +#265152 = PLANE('',#265153); +#265153 = AXIS2_PLACEMENT_3D('',#265154,#265155,#265156); +#265154 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#265155 = DIRECTION('',(-0.,-0.,-1.)); +#265156 = DIRECTION('',(-1.,0.,0.)); +#265157 = MANIFOLD_SOLID_BREP('',#265158); +#265158 = CLOSED_SHELL('',(#265159,#265201,#265232,#265263,#265294, + #265325,#265358,#265389,#265420,#265451,#265482,#265513,#265535, + #265555)); +#265159 = ADVANCED_FACE('',(#265160),#265196,.T.); +#265160 = FACE_BOUND('',#265161,.F.); +#265161 = EDGE_LOOP('',(#265162,#265172,#265181,#265189)); +#265162 = ORIENTED_EDGE('',*,*,#265163,.T.); +#265163 = EDGE_CURVE('',#265164,#265166,#265168,.T.); +#265164 = VERTEX_POINT('',#265165); +#265165 = CARTESIAN_POINT('',(147.444443,-114.416853,0.)); +#265166 = VERTEX_POINT('',#265167); +#265167 = CARTESIAN_POINT('',(147.444443,-114.416853,-3.5E-02)); +#265168 = LINE('',#265169,#265170); +#265169 = CARTESIAN_POINT('',(147.444443,-114.416853,0.)); +#265170 = VECTOR('',#265171,1.); +#265171 = DIRECTION('',(0.,0.,-1.)); +#265172 = ORIENTED_EDGE('',*,*,#265173,.T.); +#265173 = EDGE_CURVE('',#265166,#265174,#265176,.T.); +#265174 = VERTEX_POINT('',#265175); +#265175 = CARTESIAN_POINT('',(147.598079,-114.480491,-3.5E-02)); +#265176 = CIRCLE('',#265177,0.100000590676); +#265177 = AXIS2_PLACEMENT_3D('',#265178,#265179,#265180); +#265178 = CARTESIAN_POINT('',(147.5,-114.5000006872,-3.5E-02)); +#265179 = DIRECTION('',(0.,0.,-1.)); +#265180 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#265181 = ORIENTED_EDGE('',*,*,#265182,.F.); +#265182 = EDGE_CURVE('',#265183,#265174,#265185,.T.); +#265183 = VERTEX_POINT('',#265184); +#265184 = CARTESIAN_POINT('',(147.598079,-114.480491,0.)); +#265185 = LINE('',#265186,#265187); +#265186 = CARTESIAN_POINT('',(147.598079,-114.480491,0.)); +#265187 = VECTOR('',#265188,1.); +#265188 = DIRECTION('',(0.,0.,-1.)); +#265189 = ORIENTED_EDGE('',*,*,#265190,.F.); +#265190 = EDGE_CURVE('',#265164,#265183,#265191,.T.); +#265191 = CIRCLE('',#265192,0.100000590676); +#265192 = AXIS2_PLACEMENT_3D('',#265193,#265194,#265195); +#265193 = CARTESIAN_POINT('',(147.5,-114.5000006872,0.)); +#265194 = DIRECTION('',(0.,0.,-1.)); +#265195 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#265196 = CYLINDRICAL_SURFACE('',#265197,0.100000590676); +#265197 = AXIS2_PLACEMENT_3D('',#265198,#265199,#265200); +#265198 = CARTESIAN_POINT('',(147.5,-114.5000006872,0.)); +#265199 = DIRECTION('',(-0.,-0.,1.)); +#265200 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#265201 = ADVANCED_FACE('',(#265202),#265227,.F.); +#265202 = FACE_BOUND('',#265203,.F.); +#265203 = EDGE_LOOP('',(#265204,#265205,#265213,#265221)); +#265204 = ORIENTED_EDGE('',*,*,#265182,.T.); +#265205 = ORIENTED_EDGE('',*,*,#265206,.T.); +#265206 = EDGE_CURVE('',#265174,#265207,#265209,.T.); +#265207 = VERTEX_POINT('',#265208); +#265208 = CARTESIAN_POINT('',(147.6,-116.783578,-3.5E-02)); +#265209 = LINE('',#265210,#265211); +#265210 = CARTESIAN_POINT('',(147.598079,-114.480491,-3.5E-02)); +#265211 = VECTOR('',#265212,1.); +#265212 = DIRECTION('',(8.340975967228E-04,-0.999999652141,0.)); +#265213 = ORIENTED_EDGE('',*,*,#265214,.F.); +#265214 = EDGE_CURVE('',#265215,#265207,#265217,.T.); +#265215 = VERTEX_POINT('',#265216); +#265216 = CARTESIAN_POINT('',(147.6,-116.783578,0.)); +#265217 = LINE('',#265218,#265219); +#265218 = CARTESIAN_POINT('',(147.6,-116.783578,0.)); +#265219 = VECTOR('',#265220,1.); +#265220 = DIRECTION('',(0.,0.,-1.)); +#265221 = ORIENTED_EDGE('',*,*,#265222,.F.); +#265222 = EDGE_CURVE('',#265183,#265215,#265223,.T.); +#265223 = LINE('',#265224,#265225); +#265224 = CARTESIAN_POINT('',(147.598079,-114.480491,0.)); +#265225 = VECTOR('',#265226,1.); +#265226 = DIRECTION('',(8.340975967228E-04,-0.999999652141,0.)); +#265227 = PLANE('',#265228); +#265228 = AXIS2_PLACEMENT_3D('',#265229,#265230,#265231); +#265229 = CARTESIAN_POINT('',(147.598079,-114.480491,0.)); +#265230 = DIRECTION('',(-0.999999652141,-8.340975967228E-04,-0.)); +#265231 = DIRECTION('',(8.340975967228E-04,-0.999999652141,0.)); +#265232 = ADVANCED_FACE('',(#265233),#265258,.F.); +#265233 = FACE_BOUND('',#265234,.F.); +#265234 = EDGE_LOOP('',(#265235,#265236,#265244,#265252)); +#265235 = ORIENTED_EDGE('',*,*,#265214,.T.); +#265236 = ORIENTED_EDGE('',*,*,#265237,.T.); +#265237 = EDGE_CURVE('',#265207,#265238,#265240,.T.); +#265238 = VERTEX_POINT('',#265239); +#265239 = CARTESIAN_POINT('',(150.458147,-119.644443,-3.5E-02)); +#265240 = LINE('',#265241,#265242); +#265241 = CARTESIAN_POINT('',(147.6,-116.783578,-3.5E-02)); +#265242 = VECTOR('',#265243,1.); +#265243 = DIRECTION('',(0.70677064398,-0.707442758679,0.)); +#265244 = ORIENTED_EDGE('',*,*,#265245,.F.); +#265245 = EDGE_CURVE('',#265246,#265238,#265248,.T.); +#265246 = VERTEX_POINT('',#265247); +#265247 = CARTESIAN_POINT('',(150.458147,-119.644443,0.)); +#265248 = LINE('',#265249,#265250); +#265249 = CARTESIAN_POINT('',(150.458147,-119.644443,0.)); +#265250 = VECTOR('',#265251,1.); +#265251 = DIRECTION('',(0.,0.,-1.)); +#265252 = ORIENTED_EDGE('',*,*,#265253,.F.); +#265253 = EDGE_CURVE('',#265215,#265246,#265254,.T.); +#265254 = LINE('',#265255,#265256); +#265255 = CARTESIAN_POINT('',(147.6,-116.783578,0.)); +#265256 = VECTOR('',#265257,1.); +#265257 = DIRECTION('',(0.70677064398,-0.707442758679,0.)); +#265258 = PLANE('',#265259); +#265259 = AXIS2_PLACEMENT_3D('',#265260,#265261,#265262); +#265260 = CARTESIAN_POINT('',(147.6,-116.783578,0.)); +#265261 = DIRECTION('',(-0.707442758679,-0.70677064398,-0.)); +#265262 = DIRECTION('',(0.70677064398,-0.707442758679,0.)); +#265263 = ADVANCED_FACE('',(#265264),#265289,.F.); +#265264 = FACE_BOUND('',#265265,.F.); +#265265 = EDGE_LOOP('',(#265266,#265267,#265275,#265283)); +#265266 = ORIENTED_EDGE('',*,*,#265245,.T.); +#265267 = ORIENTED_EDGE('',*,*,#265268,.T.); +#265268 = EDGE_CURVE('',#265238,#265269,#265271,.T.); +#265269 = VERTEX_POINT('',#265270); +#265270 = CARTESIAN_POINT('',(150.473079,-119.680491,-3.5E-02)); +#265271 = LINE('',#265272,#265273); +#265272 = CARTESIAN_POINT('',(150.458147,-119.644443,-3.5E-02)); +#265273 = VECTOR('',#265274,1.); +#265274 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#265275 = ORIENTED_EDGE('',*,*,#265276,.F.); +#265276 = EDGE_CURVE('',#265277,#265269,#265279,.T.); +#265277 = VERTEX_POINT('',#265278); +#265278 = CARTESIAN_POINT('',(150.473079,-119.680491,0.)); +#265279 = LINE('',#265280,#265281); +#265280 = CARTESIAN_POINT('',(150.473079,-119.680491,0.)); +#265281 = VECTOR('',#265282,1.); +#265282 = DIRECTION('',(0.,0.,-1.)); +#265283 = ORIENTED_EDGE('',*,*,#265284,.F.); +#265284 = EDGE_CURVE('',#265246,#265277,#265285,.T.); +#265285 = LINE('',#265286,#265287); +#265286 = CARTESIAN_POINT('',(150.458147,-119.644443,0.)); +#265287 = VECTOR('',#265288,1.); +#265288 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#265289 = PLANE('',#265290); +#265290 = AXIS2_PLACEMENT_3D('',#265291,#265292,#265293); +#265291 = CARTESIAN_POINT('',(150.458147,-119.644443,0.)); +#265292 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#265293 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#265294 = ADVANCED_FACE('',(#265295),#265320,.F.); +#265295 = FACE_BOUND('',#265296,.F.); +#265296 = EDGE_LOOP('',(#265297,#265298,#265306,#265314)); +#265297 = ORIENTED_EDGE('',*,*,#265276,.T.); +#265298 = ORIENTED_EDGE('',*,*,#265299,.T.); +#265299 = EDGE_CURVE('',#265269,#265300,#265302,.T.); +#265300 = VERTEX_POINT('',#265301); +#265301 = CARTESIAN_POINT('',(150.473079,-120.969509,-3.5E-02)); +#265302 = LINE('',#265303,#265304); +#265303 = CARTESIAN_POINT('',(150.473079,-119.680491,-3.5E-02)); +#265304 = VECTOR('',#265305,1.); +#265305 = DIRECTION('',(0.,-1.,0.)); +#265306 = ORIENTED_EDGE('',*,*,#265307,.F.); +#265307 = EDGE_CURVE('',#265308,#265300,#265310,.T.); +#265308 = VERTEX_POINT('',#265309); +#265309 = CARTESIAN_POINT('',(150.473079,-120.969509,0.)); +#265310 = LINE('',#265311,#265312); +#265311 = CARTESIAN_POINT('',(150.473079,-120.969509,0.)); +#265312 = VECTOR('',#265313,1.); +#265313 = DIRECTION('',(0.,0.,-1.)); +#265314 = ORIENTED_EDGE('',*,*,#265315,.F.); +#265315 = EDGE_CURVE('',#265277,#265308,#265316,.T.); +#265316 = LINE('',#265317,#265318); +#265317 = CARTESIAN_POINT('',(150.473079,-119.680491,0.)); +#265318 = VECTOR('',#265319,1.); +#265319 = DIRECTION('',(0.,-1.,0.)); +#265320 = PLANE('',#265321); +#265321 = AXIS2_PLACEMENT_3D('',#265322,#265323,#265324); +#265322 = CARTESIAN_POINT('',(150.473079,-119.680491,0.)); +#265323 = DIRECTION('',(-1.,-0.,-0.)); +#265324 = DIRECTION('',(0.,-1.,0.)); +#265325 = ADVANCED_FACE('',(#265326),#265353,.T.); +#265326 = FACE_BOUND('',#265327,.F.); +#265327 = EDGE_LOOP('',(#265328,#265329,#265338,#265346)); +#265328 = ORIENTED_EDGE('',*,*,#265307,.T.); +#265329 = ORIENTED_EDGE('',*,*,#265330,.T.); +#265330 = EDGE_CURVE('',#265300,#265331,#265333,.T.); +#265331 = VERTEX_POINT('',#265332); +#265332 = CARTESIAN_POINT('',(150.276921,-120.969509,-3.5E-02)); +#265333 = CIRCLE('',#265334,0.100000456609); +#265334 = AXIS2_PLACEMENT_3D('',#265335,#265336,#265337); +#265335 = CARTESIAN_POINT('',(150.375,-120.95,-3.5E-02)); +#265336 = DIRECTION('',(-0.,0.,-1.)); +#265337 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#265338 = ORIENTED_EDGE('',*,*,#265339,.F.); +#265339 = EDGE_CURVE('',#265340,#265331,#265342,.T.); +#265340 = VERTEX_POINT('',#265341); +#265341 = CARTESIAN_POINT('',(150.276921,-120.969509,0.)); +#265342 = LINE('',#265343,#265344); +#265343 = CARTESIAN_POINT('',(150.276921,-120.969509,0.)); +#265344 = VECTOR('',#265345,1.); +#265345 = DIRECTION('',(0.,0.,-1.)); +#265346 = ORIENTED_EDGE('',*,*,#265347,.F.); +#265347 = EDGE_CURVE('',#265308,#265340,#265348,.T.); +#265348 = CIRCLE('',#265349,0.100000456609); +#265349 = AXIS2_PLACEMENT_3D('',#265350,#265351,#265352); +#265350 = CARTESIAN_POINT('',(150.375,-120.95,0.)); +#265351 = DIRECTION('',(-0.,0.,-1.)); +#265352 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#265353 = CYLINDRICAL_SURFACE('',#265354,0.100000456609); +#265354 = AXIS2_PLACEMENT_3D('',#265355,#265356,#265357); +#265355 = CARTESIAN_POINT('',(150.375,-120.95,0.)); +#265356 = DIRECTION('',(0.,-0.,1.)); +#265357 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#265358 = ADVANCED_FACE('',(#265359),#265384,.F.); +#265359 = FACE_BOUND('',#265360,.F.); +#265360 = EDGE_LOOP('',(#265361,#265362,#265370,#265378)); +#265361 = ORIENTED_EDGE('',*,*,#265339,.T.); +#265362 = ORIENTED_EDGE('',*,*,#265363,.T.); +#265363 = EDGE_CURVE('',#265331,#265364,#265366,.T.); +#265364 = VERTEX_POINT('',#265365); +#265365 = CARTESIAN_POINT('',(150.275,-119.741421,-3.5E-02)); +#265366 = LINE('',#265367,#265368); +#265367 = CARTESIAN_POINT('',(150.276921,-120.969509,-3.5E-02)); +#265368 = VECTOR('',#265369,1.); +#265369 = DIRECTION('',(-1.564218239938E-03,0.99999877661,0.)); +#265370 = ORIENTED_EDGE('',*,*,#265371,.F.); +#265371 = EDGE_CURVE('',#265372,#265364,#265374,.T.); +#265372 = VERTEX_POINT('',#265373); +#265373 = CARTESIAN_POINT('',(150.275,-119.741421,0.)); +#265374 = LINE('',#265375,#265376); +#265375 = CARTESIAN_POINT('',(150.275,-119.741421,0.)); +#265376 = VECTOR('',#265377,1.); +#265377 = DIRECTION('',(0.,0.,-1.)); +#265378 = ORIENTED_EDGE('',*,*,#265379,.F.); +#265379 = EDGE_CURVE('',#265340,#265372,#265380,.T.); +#265380 = LINE('',#265381,#265382); +#265381 = CARTESIAN_POINT('',(150.276921,-120.969509,0.)); +#265382 = VECTOR('',#265383,1.); +#265383 = DIRECTION('',(-1.564218239938E-03,0.99999877661,0.)); +#265384 = PLANE('',#265385); +#265385 = AXIS2_PLACEMENT_3D('',#265386,#265387,#265388); +#265386 = CARTESIAN_POINT('',(150.276921,-120.969509,0.)); +#265387 = DIRECTION('',(0.99999877661,1.564218239938E-03,0.)); +#265388 = DIRECTION('',(-1.564218239938E-03,0.99999877661,0.)); +#265389 = ADVANCED_FACE('',(#265390),#265415,.F.); +#265390 = FACE_BOUND('',#265391,.F.); +#265391 = EDGE_LOOP('',(#265392,#265393,#265401,#265409)); +#265392 = ORIENTED_EDGE('',*,*,#265371,.T.); +#265393 = ORIENTED_EDGE('',*,*,#265394,.T.); +#265394 = EDGE_CURVE('',#265364,#265395,#265397,.T.); +#265395 = VERTEX_POINT('',#265396); +#265396 = CARTESIAN_POINT('',(147.416853,-116.880557,-3.5E-02)); +#265397 = LINE('',#265398,#265399); +#265398 = CARTESIAN_POINT('',(150.275,-119.741421,-3.5E-02)); +#265399 = VECTOR('',#265400,1.); +#265400 = DIRECTION('',(-0.706770767622,0.707442635155,0.)); +#265401 = ORIENTED_EDGE('',*,*,#265402,.F.); +#265402 = EDGE_CURVE('',#265403,#265395,#265405,.T.); +#265403 = VERTEX_POINT('',#265404); +#265404 = CARTESIAN_POINT('',(147.416853,-116.880557,0.)); +#265405 = LINE('',#265406,#265407); +#265406 = CARTESIAN_POINT('',(147.416853,-116.880557,0.)); +#265407 = VECTOR('',#265408,1.); +#265408 = DIRECTION('',(0.,0.,-1.)); +#265409 = ORIENTED_EDGE('',*,*,#265410,.F.); +#265410 = EDGE_CURVE('',#265372,#265403,#265411,.T.); +#265411 = LINE('',#265412,#265413); +#265412 = CARTESIAN_POINT('',(150.275,-119.741421,0.)); +#265413 = VECTOR('',#265414,1.); +#265414 = DIRECTION('',(-0.706770767622,0.707442635155,0.)); +#265415 = PLANE('',#265416); +#265416 = AXIS2_PLACEMENT_3D('',#265417,#265418,#265419); +#265417 = CARTESIAN_POINT('',(150.275,-119.741421,0.)); +#265418 = DIRECTION('',(0.707442635155,0.706770767622,0.)); +#265419 = DIRECTION('',(-0.706770767622,0.707442635155,0.)); +#265420 = ADVANCED_FACE('',(#265421),#265446,.F.); +#265421 = FACE_BOUND('',#265422,.F.); +#265422 = EDGE_LOOP('',(#265423,#265424,#265432,#265440)); +#265423 = ORIENTED_EDGE('',*,*,#265402,.T.); +#265424 = ORIENTED_EDGE('',*,*,#265425,.T.); +#265425 = EDGE_CURVE('',#265395,#265426,#265428,.T.); +#265426 = VERTEX_POINT('',#265427); +#265427 = CARTESIAN_POINT('',(147.401921,-116.844509,-3.5E-02)); +#265428 = LINE('',#265429,#265430); +#265429 = CARTESIAN_POINT('',(147.416853,-116.880557,-3.5E-02)); +#265430 = VECTOR('',#265431,1.); +#265431 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#265432 = ORIENTED_EDGE('',*,*,#265433,.F.); +#265433 = EDGE_CURVE('',#265434,#265426,#265436,.T.); +#265434 = VERTEX_POINT('',#265435); +#265435 = CARTESIAN_POINT('',(147.401921,-116.844509,0.)); +#265436 = LINE('',#265437,#265438); +#265437 = CARTESIAN_POINT('',(147.401921,-116.844509,0.)); +#265438 = VECTOR('',#265439,1.); +#265439 = DIRECTION('',(0.,0.,-1.)); +#265440 = ORIENTED_EDGE('',*,*,#265441,.F.); +#265441 = EDGE_CURVE('',#265403,#265434,#265442,.T.); +#265442 = LINE('',#265443,#265444); +#265443 = CARTESIAN_POINT('',(147.416853,-116.880557,0.)); +#265444 = VECTOR('',#265445,1.); +#265445 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#265446 = PLANE('',#265447); +#265447 = AXIS2_PLACEMENT_3D('',#265448,#265449,#265450); +#265448 = CARTESIAN_POINT('',(147.416853,-116.880557,0.)); +#265449 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#265450 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#265451 = ADVANCED_FACE('',(#265452),#265477,.F.); +#265452 = FACE_BOUND('',#265453,.F.); +#265453 = EDGE_LOOP('',(#265454,#265455,#265463,#265471)); +#265454 = ORIENTED_EDGE('',*,*,#265433,.T.); +#265455 = ORIENTED_EDGE('',*,*,#265456,.T.); +#265456 = EDGE_CURVE('',#265426,#265457,#265459,.T.); +#265457 = VERTEX_POINT('',#265458); +#265458 = CARTESIAN_POINT('',(147.401921,-114.480491,-3.5E-02)); +#265459 = LINE('',#265460,#265461); +#265460 = CARTESIAN_POINT('',(147.401921,-116.844509,-3.5E-02)); +#265461 = VECTOR('',#265462,1.); +#265462 = DIRECTION('',(0.,1.,0.)); +#265463 = ORIENTED_EDGE('',*,*,#265464,.F.); +#265464 = EDGE_CURVE('',#265465,#265457,#265467,.T.); +#265465 = VERTEX_POINT('',#265466); +#265466 = CARTESIAN_POINT('',(147.401921,-114.480491,0.)); +#265467 = LINE('',#265468,#265469); +#265468 = CARTESIAN_POINT('',(147.401921,-114.480491,0.)); +#265469 = VECTOR('',#265470,1.); +#265470 = DIRECTION('',(0.,0.,-1.)); +#265471 = ORIENTED_EDGE('',*,*,#265472,.F.); +#265472 = EDGE_CURVE('',#265434,#265465,#265473,.T.); +#265473 = LINE('',#265474,#265475); +#265474 = CARTESIAN_POINT('',(147.401921,-116.844509,0.)); +#265475 = VECTOR('',#265476,1.); +#265476 = DIRECTION('',(0.,1.,0.)); +#265477 = PLANE('',#265478); +#265478 = AXIS2_PLACEMENT_3D('',#265479,#265480,#265481); +#265479 = CARTESIAN_POINT('',(147.401921,-116.844509,0.)); +#265480 = DIRECTION('',(1.,-0.,0.)); +#265481 = DIRECTION('',(0.,1.,0.)); +#265482 = ADVANCED_FACE('',(#265483),#265508,.F.); +#265483 = FACE_BOUND('',#265484,.F.); +#265484 = EDGE_LOOP('',(#265485,#265486,#265494,#265502)); +#265485 = ORIENTED_EDGE('',*,*,#265464,.T.); +#265486 = ORIENTED_EDGE('',*,*,#265487,.T.); +#265487 = EDGE_CURVE('',#265457,#265488,#265490,.T.); +#265488 = VERTEX_POINT('',#265489); +#265489 = CARTESIAN_POINT('',(147.416853,-114.444443,-3.5E-02)); +#265490 = LINE('',#265491,#265492); +#265491 = CARTESIAN_POINT('',(147.401921,-114.480491,-3.5E-02)); +#265492 = VECTOR('',#265493,1.); +#265493 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#265494 = ORIENTED_EDGE('',*,*,#265495,.F.); +#265495 = EDGE_CURVE('',#265496,#265488,#265498,.T.); +#265496 = VERTEX_POINT('',#265497); +#265497 = CARTESIAN_POINT('',(147.416853,-114.444443,0.)); +#265498 = LINE('',#265499,#265500); +#265499 = CARTESIAN_POINT('',(147.416853,-114.444443,0.)); +#265500 = VECTOR('',#265501,1.); +#265501 = DIRECTION('',(0.,0.,-1.)); +#265502 = ORIENTED_EDGE('',*,*,#265503,.F.); +#265503 = EDGE_CURVE('',#265465,#265496,#265504,.T.); +#265504 = LINE('',#265505,#265506); +#265505 = CARTESIAN_POINT('',(147.401921,-114.480491,0.)); +#265506 = VECTOR('',#265507,1.); +#265507 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#265508 = PLANE('',#265509); +#265509 = AXIS2_PLACEMENT_3D('',#265510,#265511,#265512); +#265510 = CARTESIAN_POINT('',(147.401921,-114.480491,0.)); +#265511 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#265512 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#265513 = ADVANCED_FACE('',(#265514),#265530,.F.); +#265514 = FACE_BOUND('',#265515,.F.); +#265515 = EDGE_LOOP('',(#265516,#265517,#265523,#265524)); +#265516 = ORIENTED_EDGE('',*,*,#265495,.T.); +#265517 = ORIENTED_EDGE('',*,*,#265518,.T.); +#265518 = EDGE_CURVE('',#265488,#265166,#265519,.T.); +#265519 = LINE('',#265520,#265521); +#265520 = CARTESIAN_POINT('',(147.416853,-114.444443,-3.5E-02)); +#265521 = VECTOR('',#265522,1.); +#265522 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#265523 = ORIENTED_EDGE('',*,*,#265163,.F.); +#265524 = ORIENTED_EDGE('',*,*,#265525,.F.); +#265525 = EDGE_CURVE('',#265496,#265164,#265526,.T.); +#265526 = LINE('',#265527,#265528); +#265527 = CARTESIAN_POINT('',(147.416853,-114.444443,0.)); +#265528 = VECTOR('',#265529,1.); +#265529 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#265530 = PLANE('',#265531); +#265531 = AXIS2_PLACEMENT_3D('',#265532,#265533,#265534); +#265532 = CARTESIAN_POINT('',(147.416853,-114.444443,0.)); +#265533 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#265534 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#265535 = ADVANCED_FACE('',(#265536),#265550,.F.); +#265536 = FACE_BOUND('',#265537,.F.); +#265537 = EDGE_LOOP('',(#265538,#265539,#265540,#265541,#265542,#265543, + #265544,#265545,#265546,#265547,#265548,#265549)); +#265538 = ORIENTED_EDGE('',*,*,#265190,.T.); +#265539 = ORIENTED_EDGE('',*,*,#265222,.T.); +#265540 = ORIENTED_EDGE('',*,*,#265253,.T.); +#265541 = ORIENTED_EDGE('',*,*,#265284,.T.); +#265542 = ORIENTED_EDGE('',*,*,#265315,.T.); +#265543 = ORIENTED_EDGE('',*,*,#265347,.T.); +#265544 = ORIENTED_EDGE('',*,*,#265379,.T.); +#265545 = ORIENTED_EDGE('',*,*,#265410,.T.); +#265546 = ORIENTED_EDGE('',*,*,#265441,.T.); +#265547 = ORIENTED_EDGE('',*,*,#265472,.T.); +#265548 = ORIENTED_EDGE('',*,*,#265503,.T.); +#265549 = ORIENTED_EDGE('',*,*,#265525,.T.); +#265550 = PLANE('',#265551); +#265551 = AXIS2_PLACEMENT_3D('',#265552,#265553,#265554); +#265552 = CARTESIAN_POINT('',(0.,0.,0.)); +#265553 = DIRECTION('',(-0.,-0.,-1.)); +#265554 = DIRECTION('',(-1.,0.,0.)); +#265555 = ADVANCED_FACE('',(#265556),#265570,.T.); +#265556 = FACE_BOUND('',#265557,.T.); +#265557 = EDGE_LOOP('',(#265558,#265559,#265560,#265561,#265562,#265563, + #265564,#265565,#265566,#265567,#265568,#265569)); +#265558 = ORIENTED_EDGE('',*,*,#265173,.T.); +#265559 = ORIENTED_EDGE('',*,*,#265206,.T.); +#265560 = ORIENTED_EDGE('',*,*,#265237,.T.); +#265561 = ORIENTED_EDGE('',*,*,#265268,.T.); +#265562 = ORIENTED_EDGE('',*,*,#265299,.T.); +#265563 = ORIENTED_EDGE('',*,*,#265330,.T.); +#265564 = ORIENTED_EDGE('',*,*,#265363,.T.); +#265565 = ORIENTED_EDGE('',*,*,#265394,.T.); +#265566 = ORIENTED_EDGE('',*,*,#265425,.T.); +#265567 = ORIENTED_EDGE('',*,*,#265456,.T.); +#265568 = ORIENTED_EDGE('',*,*,#265487,.T.); +#265569 = ORIENTED_EDGE('',*,*,#265518,.T.); +#265570 = PLANE('',#265571); +#265571 = AXIS2_PLACEMENT_3D('',#265572,#265573,#265574); +#265572 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#265573 = DIRECTION('',(-0.,-0.,-1.)); +#265574 = DIRECTION('',(-1.,0.,0.)); +#265575 = MANIFOLD_SOLID_BREP('',#265576); +#265576 = CLOSED_SHELL('',(#265577,#265619,#265650,#265681,#265712, + #265743,#265774,#265805,#265836,#265867,#265900,#265931,#265962, + #265993,#266024,#266057,#266088,#266119,#266150,#266181,#266214, + #266245,#266276,#266307,#266338,#266369,#266402,#266433,#266464, + #266495,#266526,#266548,#266587)); +#265577 = ADVANCED_FACE('',(#265578),#265614,.T.); +#265578 = FACE_BOUND('',#265579,.F.); +#265579 = EDGE_LOOP('',(#265580,#265590,#265599,#265607)); +#265580 = ORIENTED_EDGE('',*,*,#265581,.T.); +#265581 = EDGE_CURVE('',#265582,#265584,#265586,.T.); +#265582 = VERTEX_POINT('',#265583); +#265583 = CARTESIAN_POINT('',(146.394443,-120.676853,0.)); +#265584 = VERTEX_POINT('',#265585); +#265585 = CARTESIAN_POINT('',(146.394443,-120.676853,-3.5E-02)); +#265586 = LINE('',#265587,#265588); +#265587 = CARTESIAN_POINT('',(146.394443,-120.676853,0.)); +#265588 = VECTOR('',#265589,1.); +#265589 = DIRECTION('',(0.,0.,-1.)); +#265590 = ORIENTED_EDGE('',*,*,#265591,.T.); +#265591 = EDGE_CURVE('',#265584,#265592,#265594,.T.); +#265592 = VERTEX_POINT('',#265593); +#265593 = CARTESIAN_POINT('',(146.548079,-120.740491,-3.5E-02)); +#265594 = CIRCLE('',#265595,0.100000590676); +#265595 = AXIS2_PLACEMENT_3D('',#265596,#265597,#265598); +#265596 = CARTESIAN_POINT('',(146.45,-120.7600006871,-3.5E-02)); +#265597 = DIRECTION('',(0.,0.,-1.)); +#265598 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#265599 = ORIENTED_EDGE('',*,*,#265600,.F.); +#265600 = EDGE_CURVE('',#265601,#265592,#265603,.T.); +#265601 = VERTEX_POINT('',#265602); +#265602 = CARTESIAN_POINT('',(146.548079,-120.740491,0.)); +#265603 = LINE('',#265604,#265605); +#265604 = CARTESIAN_POINT('',(146.548079,-120.740491,0.)); +#265605 = VECTOR('',#265606,1.); +#265606 = DIRECTION('',(0.,0.,-1.)); +#265607 = ORIENTED_EDGE('',*,*,#265608,.F.); +#265608 = EDGE_CURVE('',#265582,#265601,#265609,.T.); +#265609 = CIRCLE('',#265610,0.100000590676); +#265610 = AXIS2_PLACEMENT_3D('',#265611,#265612,#265613); +#265611 = CARTESIAN_POINT('',(146.45,-120.7600006871,0.)); +#265612 = DIRECTION('',(0.,0.,-1.)); +#265613 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#265614 = CYLINDRICAL_SURFACE('',#265615,0.100000590676); +#265615 = AXIS2_PLACEMENT_3D('',#265616,#265617,#265618); +#265616 = CARTESIAN_POINT('',(146.45,-120.7600006871,0.)); +#265617 = DIRECTION('',(-0.,-0.,1.)); +#265618 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#265619 = ADVANCED_FACE('',(#265620),#265645,.F.); +#265620 = FACE_BOUND('',#265621,.F.); +#265621 = EDGE_LOOP('',(#265622,#265623,#265631,#265639)); +#265622 = ORIENTED_EDGE('',*,*,#265600,.T.); +#265623 = ORIENTED_EDGE('',*,*,#265624,.T.); +#265624 = EDGE_CURVE('',#265592,#265625,#265627,.T.); +#265625 = VERTEX_POINT('',#265626); +#265626 = CARTESIAN_POINT('',(146.548079,-121.369509,-3.5E-02)); +#265627 = LINE('',#265628,#265629); +#265628 = CARTESIAN_POINT('',(146.548079,-120.740491,-3.5E-02)); +#265629 = VECTOR('',#265630,1.); +#265630 = DIRECTION('',(0.,-1.,0.)); +#265631 = ORIENTED_EDGE('',*,*,#265632,.F.); +#265632 = EDGE_CURVE('',#265633,#265625,#265635,.T.); +#265633 = VERTEX_POINT('',#265634); +#265634 = CARTESIAN_POINT('',(146.548079,-121.369509,0.)); +#265635 = LINE('',#265636,#265637); +#265636 = CARTESIAN_POINT('',(146.548079,-121.369509,0.)); +#265637 = VECTOR('',#265638,1.); +#265638 = DIRECTION('',(0.,0.,-1.)); +#265639 = ORIENTED_EDGE('',*,*,#265640,.F.); +#265640 = EDGE_CURVE('',#265601,#265633,#265641,.T.); +#265641 = LINE('',#265642,#265643); +#265642 = CARTESIAN_POINT('',(146.548079,-120.740491,0.)); +#265643 = VECTOR('',#265644,1.); +#265644 = DIRECTION('',(0.,-1.,0.)); +#265645 = PLANE('',#265646); +#265646 = AXIS2_PLACEMENT_3D('',#265647,#265648,#265649); +#265647 = CARTESIAN_POINT('',(146.548079,-120.740491,0.)); +#265648 = DIRECTION('',(-1.,-0.,-0.)); +#265649 = DIRECTION('',(0.,-1.,0.)); +#265650 = ADVANCED_FACE('',(#265651),#265676,.F.); +#265651 = FACE_BOUND('',#265652,.F.); +#265652 = EDGE_LOOP('',(#265653,#265654,#265662,#265670)); +#265653 = ORIENTED_EDGE('',*,*,#265632,.T.); +#265654 = ORIENTED_EDGE('',*,*,#265655,.T.); +#265655 = EDGE_CURVE('',#265625,#265656,#265658,.T.); +#265656 = VERTEX_POINT('',#265657); +#265657 = CARTESIAN_POINT('',(146.533147,-121.405557,-3.5E-02)); +#265658 = LINE('',#265659,#265660); +#265659 = CARTESIAN_POINT('',(146.548079,-121.369509,-3.5E-02)); +#265660 = VECTOR('',#265661,1.); +#265661 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#265662 = ORIENTED_EDGE('',*,*,#265663,.F.); +#265663 = EDGE_CURVE('',#265664,#265656,#265666,.T.); +#265664 = VERTEX_POINT('',#265665); +#265665 = CARTESIAN_POINT('',(146.533147,-121.405557,0.)); +#265666 = LINE('',#265667,#265668); +#265667 = CARTESIAN_POINT('',(146.533147,-121.405557,0.)); +#265668 = VECTOR('',#265669,1.); +#265669 = DIRECTION('',(0.,0.,-1.)); +#265670 = ORIENTED_EDGE('',*,*,#265671,.F.); +#265671 = EDGE_CURVE('',#265633,#265664,#265672,.T.); +#265672 = LINE('',#265673,#265674); +#265673 = CARTESIAN_POINT('',(146.548079,-121.369509,0.)); +#265674 = VECTOR('',#265675,1.); +#265675 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#265676 = PLANE('',#265677); +#265677 = AXIS2_PLACEMENT_3D('',#265678,#265679,#265680); +#265678 = CARTESIAN_POINT('',(146.548079,-121.369509,0.)); +#265679 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#265680 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#265681 = ADVANCED_FACE('',(#265682),#265707,.F.); +#265682 = FACE_BOUND('',#265683,.F.); +#265683 = EDGE_LOOP('',(#265684,#265685,#265693,#265701)); +#265684 = ORIENTED_EDGE('',*,*,#265663,.T.); +#265685 = ORIENTED_EDGE('',*,*,#265686,.T.); +#265686 = EDGE_CURVE('',#265656,#265687,#265689,.T.); +#265687 = VERTEX_POINT('',#265688); +#265688 = CARTESIAN_POINT('',(146.291421,-121.65,-3.5E-02)); +#265689 = LINE('',#265690,#265691); +#265690 = CARTESIAN_POINT('',(146.533147,-121.405557,-3.5E-02)); +#265691 = VECTOR('',#265692,1.); +#265692 = DIRECTION('',(-0.703144069816,-0.711047408463,0.)); +#265693 = ORIENTED_EDGE('',*,*,#265694,.F.); +#265694 = EDGE_CURVE('',#265695,#265687,#265697,.T.); +#265695 = VERTEX_POINT('',#265696); +#265696 = CARTESIAN_POINT('',(146.291421,-121.65,0.)); +#265697 = LINE('',#265698,#265699); +#265698 = CARTESIAN_POINT('',(146.291421,-121.65,0.)); +#265699 = VECTOR('',#265700,1.); +#265700 = DIRECTION('',(0.,0.,-1.)); +#265701 = ORIENTED_EDGE('',*,*,#265702,.F.); +#265702 = EDGE_CURVE('',#265664,#265695,#265703,.T.); +#265703 = LINE('',#265704,#265705); +#265704 = CARTESIAN_POINT('',(146.533147,-121.405557,0.)); +#265705 = VECTOR('',#265706,1.); +#265706 = DIRECTION('',(-0.703144069816,-0.711047408463,0.)); +#265707 = PLANE('',#265708); +#265708 = AXIS2_PLACEMENT_3D('',#265709,#265710,#265711); +#265709 = CARTESIAN_POINT('',(146.533147,-121.405557,0.)); +#265710 = DIRECTION('',(-0.711047408463,0.703144069816,0.)); +#265711 = DIRECTION('',(-0.703144069816,-0.711047408463,0.)); +#265712 = ADVANCED_FACE('',(#265713),#265738,.F.); +#265713 = FACE_BOUND('',#265714,.F.); +#265714 = EDGE_LOOP('',(#265715,#265716,#265724,#265732)); +#265715 = ORIENTED_EDGE('',*,*,#265694,.T.); +#265716 = ORIENTED_EDGE('',*,*,#265717,.T.); +#265717 = EDGE_CURVE('',#265687,#265718,#265720,.T.); +#265718 = VERTEX_POINT('',#265719); +#265719 = CARTESIAN_POINT('',(147.083148,-122.444443,-3.5E-02)); +#265720 = LINE('',#265721,#265722); +#265721 = CARTESIAN_POINT('',(146.291421,-121.65,-3.5E-02)); +#265722 = VECTOR('',#265723,1.); +#265723 = DIRECTION('',(0.705894966919,-0.70831652224,0.)); +#265724 = ORIENTED_EDGE('',*,*,#265725,.F.); +#265725 = EDGE_CURVE('',#265726,#265718,#265728,.T.); +#265726 = VERTEX_POINT('',#265727); +#265727 = CARTESIAN_POINT('',(147.083148,-122.444443,0.)); +#265728 = LINE('',#265729,#265730); +#265729 = CARTESIAN_POINT('',(147.083148,-122.444443,0.)); +#265730 = VECTOR('',#265731,1.); +#265731 = DIRECTION('',(0.,0.,-1.)); +#265732 = ORIENTED_EDGE('',*,*,#265733,.F.); +#265733 = EDGE_CURVE('',#265695,#265726,#265734,.T.); +#265734 = LINE('',#265735,#265736); +#265735 = CARTESIAN_POINT('',(146.291421,-121.65,0.)); +#265736 = VECTOR('',#265737,1.); +#265737 = DIRECTION('',(0.705894966919,-0.70831652224,0.)); +#265738 = PLANE('',#265739); +#265739 = AXIS2_PLACEMENT_3D('',#265740,#265741,#265742); +#265740 = CARTESIAN_POINT('',(146.291421,-121.65,0.)); +#265741 = DIRECTION('',(-0.70831652224,-0.705894966919,-0.)); +#265742 = DIRECTION('',(0.705894966919,-0.70831652224,0.)); +#265743 = ADVANCED_FACE('',(#265744),#265769,.F.); +#265744 = FACE_BOUND('',#265745,.F.); +#265745 = EDGE_LOOP('',(#265746,#265747,#265755,#265763)); +#265746 = ORIENTED_EDGE('',*,*,#265725,.T.); +#265747 = ORIENTED_EDGE('',*,*,#265748,.T.); +#265748 = EDGE_CURVE('',#265718,#265749,#265751,.T.); +#265749 = VERTEX_POINT('',#265750); +#265750 = CARTESIAN_POINT('',(147.098079,-122.480491,-3.5E-02)); +#265751 = LINE('',#265752,#265753); +#265752 = CARTESIAN_POINT('',(147.083148,-122.444443,-3.5E-02)); +#265753 = VECTOR('',#265754,1.); +#265754 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#265755 = ORIENTED_EDGE('',*,*,#265756,.F.); +#265756 = EDGE_CURVE('',#265757,#265749,#265759,.T.); +#265757 = VERTEX_POINT('',#265758); +#265758 = CARTESIAN_POINT('',(147.098079,-122.480491,0.)); +#265759 = LINE('',#265760,#265761); +#265760 = CARTESIAN_POINT('',(147.098079,-122.480491,0.)); +#265761 = VECTOR('',#265762,1.); +#265762 = DIRECTION('',(0.,0.,-1.)); +#265763 = ORIENTED_EDGE('',*,*,#265764,.F.); +#265764 = EDGE_CURVE('',#265726,#265757,#265765,.T.); +#265765 = LINE('',#265766,#265767); +#265766 = CARTESIAN_POINT('',(147.083148,-122.444443,0.)); +#265767 = VECTOR('',#265768,1.); +#265768 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#265769 = PLANE('',#265770); +#265770 = AXIS2_PLACEMENT_3D('',#265771,#265772,#265773); +#265771 = CARTESIAN_POINT('',(147.083148,-122.444443,0.)); +#265772 = DIRECTION('',(-0.923884701879,-0.382670952169,-0.)); +#265773 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#265774 = ADVANCED_FACE('',(#265775),#265800,.F.); +#265775 = FACE_BOUND('',#265776,.F.); +#265776 = EDGE_LOOP('',(#265777,#265778,#265786,#265794)); +#265777 = ORIENTED_EDGE('',*,*,#265756,.T.); +#265778 = ORIENTED_EDGE('',*,*,#265779,.T.); +#265779 = EDGE_CURVE('',#265749,#265780,#265782,.T.); +#265780 = VERTEX_POINT('',#265781); +#265781 = CARTESIAN_POINT('',(147.1,-122.85,-3.5E-02)); +#265782 = LINE('',#265783,#265784); +#265783 = CARTESIAN_POINT('',(147.098079,-122.480491,-3.5E-02)); +#265784 = VECTOR('',#265785,1.); +#265785 = DIRECTION('',(5.198720574235E-03,-0.999986486561,0.)); +#265786 = ORIENTED_EDGE('',*,*,#265787,.F.); +#265787 = EDGE_CURVE('',#265788,#265780,#265790,.T.); +#265788 = VERTEX_POINT('',#265789); +#265789 = CARTESIAN_POINT('',(147.1,-122.85,0.)); +#265790 = LINE('',#265791,#265792); +#265791 = CARTESIAN_POINT('',(147.1,-122.85,0.)); +#265792 = VECTOR('',#265793,1.); +#265793 = DIRECTION('',(0.,0.,-1.)); +#265794 = ORIENTED_EDGE('',*,*,#265795,.F.); +#265795 = EDGE_CURVE('',#265757,#265788,#265796,.T.); +#265796 = LINE('',#265797,#265798); +#265797 = CARTESIAN_POINT('',(147.098079,-122.480491,0.)); +#265798 = VECTOR('',#265799,1.); +#265799 = DIRECTION('',(5.198720574235E-03,-0.999986486561,0.)); +#265800 = PLANE('',#265801); +#265801 = AXIS2_PLACEMENT_3D('',#265802,#265803,#265804); +#265802 = CARTESIAN_POINT('',(147.098079,-122.480491,0.)); +#265803 = DIRECTION('',(-0.999986486561,-5.198720574235E-03,-0.)); +#265804 = DIRECTION('',(5.198720574235E-03,-0.999986486561,0.)); +#265805 = ADVANCED_FACE('',(#265806),#265831,.F.); +#265806 = FACE_BOUND('',#265807,.F.); +#265807 = EDGE_LOOP('',(#265808,#265809,#265817,#265825)); +#265808 = ORIENTED_EDGE('',*,*,#265787,.T.); +#265809 = ORIENTED_EDGE('',*,*,#265810,.T.); +#265810 = EDGE_CURVE('',#265780,#265811,#265813,.T.); +#265811 = VERTEX_POINT('',#265812); +#265812 = CARTESIAN_POINT('',(147.408578,-122.85,-3.5E-02)); +#265813 = LINE('',#265814,#265815); +#265814 = CARTESIAN_POINT('',(147.1,-122.85,-3.5E-02)); +#265815 = VECTOR('',#265816,1.); +#265816 = DIRECTION('',(1.,0.,0.)); +#265817 = ORIENTED_EDGE('',*,*,#265818,.F.); +#265818 = EDGE_CURVE('',#265819,#265811,#265821,.T.); +#265819 = VERTEX_POINT('',#265820); +#265820 = CARTESIAN_POINT('',(147.408578,-122.85,0.)); +#265821 = LINE('',#265822,#265823); +#265822 = CARTESIAN_POINT('',(147.408578,-122.85,0.)); +#265823 = VECTOR('',#265824,1.); +#265824 = DIRECTION('',(0.,0.,-1.)); +#265825 = ORIENTED_EDGE('',*,*,#265826,.F.); +#265826 = EDGE_CURVE('',#265788,#265819,#265827,.T.); +#265827 = LINE('',#265828,#265829); +#265828 = CARTESIAN_POINT('',(147.1,-122.85,0.)); +#265829 = VECTOR('',#265830,1.); +#265830 = DIRECTION('',(1.,0.,0.)); +#265831 = PLANE('',#265832); +#265832 = AXIS2_PLACEMENT_3D('',#265833,#265834,#265835); +#265833 = CARTESIAN_POINT('',(147.1,-122.85,0.)); +#265834 = DIRECTION('',(0.,-1.,0.)); +#265835 = DIRECTION('',(1.,0.,0.)); +#265836 = ADVANCED_FACE('',(#265837),#265862,.F.); +#265837 = FACE_BOUND('',#265838,.F.); +#265838 = EDGE_LOOP('',(#265839,#265840,#265848,#265856)); +#265839 = ORIENTED_EDGE('',*,*,#265818,.T.); +#265840 = ORIENTED_EDGE('',*,*,#265841,.T.); +#265841 = EDGE_CURVE('',#265811,#265842,#265844,.T.); +#265842 = VERTEX_POINT('',#265843); +#265843 = CARTESIAN_POINT('',(148.444442,-121.816853,-3.5E-02)); +#265844 = LINE('',#265845,#265846); +#265845 = CARTESIAN_POINT('',(147.408578,-122.85,-3.5E-02)); +#265846 = VECTOR('',#265847,1.); +#265847 = DIRECTION('',(0.708034734694,0.706177608301,0.)); +#265848 = ORIENTED_EDGE('',*,*,#265849,.F.); +#265849 = EDGE_CURVE('',#265850,#265842,#265852,.T.); +#265850 = VERTEX_POINT('',#265851); +#265851 = CARTESIAN_POINT('',(148.444442,-121.816853,0.)); +#265852 = LINE('',#265853,#265854); +#265853 = CARTESIAN_POINT('',(148.444442,-121.816853,0.)); +#265854 = VECTOR('',#265855,1.); +#265855 = DIRECTION('',(0.,0.,-1.)); +#265856 = ORIENTED_EDGE('',*,*,#265857,.F.); +#265857 = EDGE_CURVE('',#265819,#265850,#265858,.T.); +#265858 = LINE('',#265859,#265860); +#265859 = CARTESIAN_POINT('',(147.408578,-122.85,0.)); +#265860 = VECTOR('',#265861,1.); +#265861 = DIRECTION('',(0.708034734694,0.706177608301,0.)); +#265862 = PLANE('',#265863); +#265863 = AXIS2_PLACEMENT_3D('',#265864,#265865,#265866); +#265864 = CARTESIAN_POINT('',(147.408578,-122.85,0.)); +#265865 = DIRECTION('',(0.706177608301,-0.708034734694,0.)); +#265866 = DIRECTION('',(0.708034734694,0.706177608301,0.)); +#265867 = ADVANCED_FACE('',(#265868),#265895,.T.); +#265868 = FACE_BOUND('',#265869,.F.); +#265869 = EDGE_LOOP('',(#265870,#265871,#265880,#265888)); +#265870 = ORIENTED_EDGE('',*,*,#265849,.T.); +#265871 = ORIENTED_EDGE('',*,*,#265872,.T.); +#265872 = EDGE_CURVE('',#265842,#265873,#265875,.T.); +#265873 = VERTEX_POINT('',#265874); +#265874 = CARTESIAN_POINT('',(148.583147,-121.955558,-3.5E-02)); +#265875 = CIRCLE('',#265876,0.10000071281); +#265876 = AXIS2_PLACEMENT_3D('',#265877,#265878,#265879); +#265877 = CARTESIAN_POINT('',(148.4999995,-121.9000005,-3.5E-02)); +#265878 = DIRECTION('',(0.,0.,-1.)); +#265879 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#265880 = ORIENTED_EDGE('',*,*,#265881,.F.); +#265881 = EDGE_CURVE('',#265882,#265873,#265884,.T.); +#265882 = VERTEX_POINT('',#265883); +#265883 = CARTESIAN_POINT('',(148.583147,-121.955558,0.)); +#265884 = LINE('',#265885,#265886); +#265885 = CARTESIAN_POINT('',(148.583147,-121.955558,0.)); +#265886 = VECTOR('',#265887,1.); +#265887 = DIRECTION('',(0.,0.,-1.)); +#265888 = ORIENTED_EDGE('',*,*,#265889,.F.); +#265889 = EDGE_CURVE('',#265850,#265882,#265890,.T.); +#265890 = CIRCLE('',#265891,0.10000071281); +#265891 = AXIS2_PLACEMENT_3D('',#265892,#265893,#265894); +#265892 = CARTESIAN_POINT('',(148.4999995,-121.9000005,0.)); +#265893 = DIRECTION('',(0.,0.,-1.)); +#265894 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#265895 = CYLINDRICAL_SURFACE('',#265896,0.10000071281); +#265896 = AXIS2_PLACEMENT_3D('',#265897,#265898,#265899); +#265897 = CARTESIAN_POINT('',(148.4999995,-121.9000005,0.)); +#265898 = DIRECTION('',(-0.,-0.,1.)); +#265899 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#265900 = ADVANCED_FACE('',(#265901),#265926,.F.); +#265901 = FACE_BOUND('',#265902,.F.); +#265902 = EDGE_LOOP('',(#265903,#265904,#265912,#265920)); +#265903 = ORIENTED_EDGE('',*,*,#265881,.T.); +#265904 = ORIENTED_EDGE('',*,*,#265905,.T.); +#265905 = EDGE_CURVE('',#265873,#265906,#265908,.T.); +#265906 = VERTEX_POINT('',#265907); +#265907 = CARTESIAN_POINT('',(147.691422,-122.85,-3.5E-02)); +#265908 = LINE('',#265909,#265910); +#265909 = CARTESIAN_POINT('',(148.583147,-121.955558,-3.5E-02)); +#265910 = VECTOR('',#265911,1.); +#265911 = DIRECTION('',(-0.70603035994,-0.708181566297,0.)); +#265912 = ORIENTED_EDGE('',*,*,#265913,.F.); +#265913 = EDGE_CURVE('',#265914,#265906,#265916,.T.); +#265914 = VERTEX_POINT('',#265915); +#265915 = CARTESIAN_POINT('',(147.691422,-122.85,0.)); +#265916 = LINE('',#265917,#265918); +#265917 = CARTESIAN_POINT('',(147.691422,-122.85,0.)); +#265918 = VECTOR('',#265919,1.); +#265919 = DIRECTION('',(0.,0.,-1.)); +#265920 = ORIENTED_EDGE('',*,*,#265921,.F.); +#265921 = EDGE_CURVE('',#265882,#265914,#265922,.T.); +#265922 = LINE('',#265923,#265924); +#265923 = CARTESIAN_POINT('',(148.583147,-121.955558,0.)); +#265924 = VECTOR('',#265925,1.); +#265925 = DIRECTION('',(-0.70603035994,-0.708181566297,0.)); +#265926 = PLANE('',#265927); +#265927 = AXIS2_PLACEMENT_3D('',#265928,#265929,#265930); +#265928 = CARTESIAN_POINT('',(148.583147,-121.955558,0.)); +#265929 = DIRECTION('',(-0.708181566297,0.70603035994,0.)); +#265930 = DIRECTION('',(-0.70603035994,-0.708181566297,0.)); +#265931 = ADVANCED_FACE('',(#265932),#265957,.F.); +#265932 = FACE_BOUND('',#265933,.F.); +#265933 = EDGE_LOOP('',(#265934,#265935,#265943,#265951)); +#265934 = ORIENTED_EDGE('',*,*,#265913,.T.); +#265935 = ORIENTED_EDGE('',*,*,#265936,.T.); +#265936 = EDGE_CURVE('',#265906,#265937,#265939,.T.); +#265937 = VERTEX_POINT('',#265938); +#265938 = CARTESIAN_POINT('',(148.069509,-122.851921,-3.5E-02)); +#265939 = LINE('',#265940,#265941); +#265940 = CARTESIAN_POINT('',(147.691422,-122.85,-3.5E-02)); +#265941 = VECTOR('',#265942,1.); +#265942 = DIRECTION('',(0.999987092776,-5.080775602529E-03,0.)); +#265943 = ORIENTED_EDGE('',*,*,#265944,.F.); +#265944 = EDGE_CURVE('',#265945,#265937,#265947,.T.); +#265945 = VERTEX_POINT('',#265946); +#265946 = CARTESIAN_POINT('',(148.069509,-122.851921,0.)); +#265947 = LINE('',#265948,#265949); +#265948 = CARTESIAN_POINT('',(148.069509,-122.851921,0.)); +#265949 = VECTOR('',#265950,1.); +#265950 = DIRECTION('',(0.,0.,-1.)); +#265951 = ORIENTED_EDGE('',*,*,#265952,.F.); +#265952 = EDGE_CURVE('',#265914,#265945,#265953,.T.); +#265953 = LINE('',#265954,#265955); +#265954 = CARTESIAN_POINT('',(147.691422,-122.85,0.)); +#265955 = VECTOR('',#265956,1.); +#265956 = DIRECTION('',(0.999987092776,-5.080775602529E-03,0.)); +#265957 = PLANE('',#265958); +#265958 = AXIS2_PLACEMENT_3D('',#265959,#265960,#265961); +#265959 = CARTESIAN_POINT('',(147.691422,-122.85,0.)); +#265960 = DIRECTION('',(-5.080775602529E-03,-0.999987092776,-0.)); +#265961 = DIRECTION('',(0.999987092776,-5.080775602529E-03,0.)); +#265962 = ADVANCED_FACE('',(#265963),#265988,.F.); +#265963 = FACE_BOUND('',#265964,.F.); +#265964 = EDGE_LOOP('',(#265965,#265966,#265974,#265982)); +#265965 = ORIENTED_EDGE('',*,*,#265944,.T.); +#265966 = ORIENTED_EDGE('',*,*,#265967,.T.); +#265967 = EDGE_CURVE('',#265937,#265968,#265970,.T.); +#265968 = VERTEX_POINT('',#265969); +#265969 = CARTESIAN_POINT('',(148.105557,-122.866853,-3.5E-02)); +#265970 = LINE('',#265971,#265972); +#265971 = CARTESIAN_POINT('',(148.069509,-122.851921,-3.5E-02)); +#265972 = VECTOR('',#265973,1.); +#265973 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#265974 = ORIENTED_EDGE('',*,*,#265975,.F.); +#265975 = EDGE_CURVE('',#265976,#265968,#265978,.T.); +#265976 = VERTEX_POINT('',#265977); +#265977 = CARTESIAN_POINT('',(148.105557,-122.866853,0.)); +#265978 = LINE('',#265979,#265980); +#265979 = CARTESIAN_POINT('',(148.105557,-122.866853,0.)); +#265980 = VECTOR('',#265981,1.); +#265981 = DIRECTION('',(0.,0.,-1.)); +#265982 = ORIENTED_EDGE('',*,*,#265983,.F.); +#265983 = EDGE_CURVE('',#265945,#265976,#265984,.T.); +#265984 = LINE('',#265985,#265986); +#265985 = CARTESIAN_POINT('',(148.069509,-122.851921,0.)); +#265986 = VECTOR('',#265987,1.); +#265987 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#265988 = PLANE('',#265989); +#265989 = AXIS2_PLACEMENT_3D('',#265990,#265991,#265992); +#265990 = CARTESIAN_POINT('',(148.069509,-122.851921,0.)); +#265991 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#265992 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#265993 = ADVANCED_FACE('',(#265994),#266019,.F.); +#265994 = FACE_BOUND('',#265995,.F.); +#265995 = EDGE_LOOP('',(#265996,#265997,#266005,#266013)); +#265996 = ORIENTED_EDGE('',*,*,#265975,.T.); +#265997 = ORIENTED_EDGE('',*,*,#265998,.T.); +#265998 = EDGE_CURVE('',#265968,#265999,#266001,.T.); +#265999 = VERTEX_POINT('',#266000); +#266000 = CARTESIAN_POINT('',(150.333147,-125.094443,-3.5E-02)); +#266001 = LINE('',#266002,#266003); +#266002 = CARTESIAN_POINT('',(148.105557,-122.866853,-3.5E-02)); +#266003 = VECTOR('',#266004,1.); +#266004 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#266005 = ORIENTED_EDGE('',*,*,#266006,.F.); +#266006 = EDGE_CURVE('',#266007,#265999,#266009,.T.); +#266007 = VERTEX_POINT('',#266008); +#266008 = CARTESIAN_POINT('',(150.333147,-125.094443,0.)); +#266009 = LINE('',#266010,#266011); +#266010 = CARTESIAN_POINT('',(150.333147,-125.094443,0.)); +#266011 = VECTOR('',#266012,1.); +#266012 = DIRECTION('',(0.,0.,-1.)); +#266013 = ORIENTED_EDGE('',*,*,#266014,.F.); +#266014 = EDGE_CURVE('',#265976,#266007,#266015,.T.); +#266015 = LINE('',#266016,#266017); +#266016 = CARTESIAN_POINT('',(148.105557,-122.866853,0.)); +#266017 = VECTOR('',#266018,1.); +#266018 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#266019 = PLANE('',#266020); +#266020 = AXIS2_PLACEMENT_3D('',#266021,#266022,#266023); +#266021 = CARTESIAN_POINT('',(148.105557,-122.866853,0.)); +#266022 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#266023 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#266024 = ADVANCED_FACE('',(#266025),#266052,.T.); +#266025 = FACE_BOUND('',#266026,.F.); +#266026 = EDGE_LOOP('',(#266027,#266028,#266037,#266045)); +#266027 = ORIENTED_EDGE('',*,*,#266006,.T.); +#266028 = ORIENTED_EDGE('',*,*,#266029,.T.); +#266029 = EDGE_CURVE('',#265999,#266030,#266032,.T.); +#266030 = VERTEX_POINT('',#266031); +#266031 = CARTESIAN_POINT('',(150.194443,-125.233147,-3.5E-02)); +#266032 = CIRCLE('',#266033,0.10000001929); +#266033 = AXIS2_PLACEMENT_3D('',#266034,#266035,#266036); +#266034 = CARTESIAN_POINT('',(150.25,-125.15,-3.5E-02)); +#266035 = DIRECTION('',(0.,0.,-1.)); +#266036 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#266037 = ORIENTED_EDGE('',*,*,#266038,.F.); +#266038 = EDGE_CURVE('',#266039,#266030,#266041,.T.); +#266039 = VERTEX_POINT('',#266040); +#266040 = CARTESIAN_POINT('',(150.194443,-125.233147,0.)); +#266041 = LINE('',#266042,#266043); +#266042 = CARTESIAN_POINT('',(150.194443,-125.233147,0.)); +#266043 = VECTOR('',#266044,1.); +#266044 = DIRECTION('',(0.,0.,-1.)); +#266045 = ORIENTED_EDGE('',*,*,#266046,.F.); +#266046 = EDGE_CURVE('',#266007,#266039,#266047,.T.); +#266047 = CIRCLE('',#266048,0.10000001929); +#266048 = AXIS2_PLACEMENT_3D('',#266049,#266050,#266051); +#266049 = CARTESIAN_POINT('',(150.25,-125.15,0.)); +#266050 = DIRECTION('',(0.,0.,-1.)); +#266051 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#266052 = CYLINDRICAL_SURFACE('',#266053,0.10000001929); +#266053 = AXIS2_PLACEMENT_3D('',#266054,#266055,#266056); +#266054 = CARTESIAN_POINT('',(150.25,-125.15,0.)); +#266055 = DIRECTION('',(-0.,-0.,1.)); +#266056 = DIRECTION('',(0.831469839609,0.555569892831,0.)); +#266057 = ADVANCED_FACE('',(#266058),#266083,.F.); +#266058 = FACE_BOUND('',#266059,.F.); +#266059 = EDGE_LOOP('',(#266060,#266061,#266069,#266077)); +#266060 = ORIENTED_EDGE('',*,*,#266038,.T.); +#266061 = ORIENTED_EDGE('',*,*,#266062,.T.); +#266062 = EDGE_CURVE('',#266030,#266063,#266065,.T.); +#266063 = VERTEX_POINT('',#266064); +#266064 = CARTESIAN_POINT('',(148.008578,-123.05,-3.5E-02)); +#266065 = LINE('',#266066,#266067); +#266066 = CARTESIAN_POINT('',(150.194443,-125.233147,-3.5E-02)); +#266067 = VECTOR('',#266068,1.); +#266068 = DIRECTION('',(-0.707546541489,0.70666674722,0.)); +#266069 = ORIENTED_EDGE('',*,*,#266070,.F.); +#266070 = EDGE_CURVE('',#266071,#266063,#266073,.T.); +#266071 = VERTEX_POINT('',#266072); +#266072 = CARTESIAN_POINT('',(148.008578,-123.05,0.)); +#266073 = LINE('',#266074,#266075); +#266074 = CARTESIAN_POINT('',(148.008578,-123.05,0.)); +#266075 = VECTOR('',#266076,1.); +#266076 = DIRECTION('',(0.,0.,-1.)); +#266077 = ORIENTED_EDGE('',*,*,#266078,.F.); +#266078 = EDGE_CURVE('',#266039,#266071,#266079,.T.); +#266079 = LINE('',#266080,#266081); +#266080 = CARTESIAN_POINT('',(150.194443,-125.233147,0.)); +#266081 = VECTOR('',#266082,1.); +#266082 = DIRECTION('',(-0.707546541489,0.70666674722,0.)); +#266083 = PLANE('',#266084); +#266084 = AXIS2_PLACEMENT_3D('',#266085,#266086,#266087); +#266085 = CARTESIAN_POINT('',(150.194443,-125.233147,0.)); +#266086 = DIRECTION('',(0.70666674722,0.707546541489,0.)); +#266087 = DIRECTION('',(-0.707546541489,0.70666674722,0.)); +#266088 = ADVANCED_FACE('',(#266089),#266114,.F.); +#266089 = FACE_BOUND('',#266090,.F.); +#266090 = EDGE_LOOP('',(#266091,#266092,#266100,#266108)); +#266091 = ORIENTED_EDGE('',*,*,#266070,.T.); +#266092 = ORIENTED_EDGE('',*,*,#266093,.T.); +#266093 = EDGE_CURVE('',#266063,#266094,#266096,.T.); +#266094 = VERTEX_POINT('',#266095); +#266095 = CARTESIAN_POINT('',(146.440491,-123.048079,-3.5E-02)); +#266096 = LINE('',#266097,#266098); +#266097 = CARTESIAN_POINT('',(148.008578,-123.05,-3.5E-02)); +#266098 = VECTOR('',#266099,1.); +#266099 = DIRECTION('',(-0.999999249615,1.225058659696E-03,0.)); +#266100 = ORIENTED_EDGE('',*,*,#266101,.F.); +#266101 = EDGE_CURVE('',#266102,#266094,#266104,.T.); +#266102 = VERTEX_POINT('',#266103); +#266103 = CARTESIAN_POINT('',(146.440491,-123.048079,0.)); +#266104 = LINE('',#266105,#266106); +#266105 = CARTESIAN_POINT('',(146.440491,-123.048079,0.)); +#266106 = VECTOR('',#266107,1.); +#266107 = DIRECTION('',(0.,0.,-1.)); +#266108 = ORIENTED_EDGE('',*,*,#266109,.F.); +#266109 = EDGE_CURVE('',#266071,#266102,#266110,.T.); +#266110 = LINE('',#266111,#266112); +#266111 = CARTESIAN_POINT('',(148.008578,-123.05,0.)); +#266112 = VECTOR('',#266113,1.); +#266113 = DIRECTION('',(-0.999999249615,1.225058659696E-03,0.)); +#266114 = PLANE('',#266115); +#266115 = AXIS2_PLACEMENT_3D('',#266116,#266117,#266118); +#266116 = CARTESIAN_POINT('',(148.008578,-123.05,0.)); +#266117 = DIRECTION('',(1.225058659696E-03,0.999999249615,0.)); +#266118 = DIRECTION('',(-0.999999249615,1.225058659696E-03,0.)); +#266119 = ADVANCED_FACE('',(#266120),#266145,.F.); +#266120 = FACE_BOUND('',#266121,.F.); +#266121 = EDGE_LOOP('',(#266122,#266123,#266131,#266139)); +#266122 = ORIENTED_EDGE('',*,*,#266101,.T.); +#266123 = ORIENTED_EDGE('',*,*,#266124,.T.); +#266124 = EDGE_CURVE('',#266094,#266125,#266127,.T.); +#266125 = VERTEX_POINT('',#266126); +#266126 = CARTESIAN_POINT('',(146.404442,-123.033147,-3.5E-02)); +#266127 = LINE('',#266128,#266129); +#266128 = CARTESIAN_POINT('',(146.440491,-123.048079,-3.5E-02)); +#266129 = VECTOR('',#266130,1.); +#266130 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#266131 = ORIENTED_EDGE('',*,*,#266132,.F.); +#266132 = EDGE_CURVE('',#266133,#266125,#266135,.T.); +#266133 = VERTEX_POINT('',#266134); +#266134 = CARTESIAN_POINT('',(146.404442,-123.033147,0.)); +#266135 = LINE('',#266136,#266137); +#266136 = CARTESIAN_POINT('',(146.404442,-123.033147,0.)); +#266137 = VECTOR('',#266138,1.); +#266138 = DIRECTION('',(0.,0.,-1.)); +#266139 = ORIENTED_EDGE('',*,*,#266140,.F.); +#266140 = EDGE_CURVE('',#266102,#266133,#266141,.T.); +#266141 = LINE('',#266142,#266143); +#266142 = CARTESIAN_POINT('',(146.440491,-123.048079,0.)); +#266143 = VECTOR('',#266144,1.); +#266144 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#266145 = PLANE('',#266146); +#266146 = AXIS2_PLACEMENT_3D('',#266147,#266148,#266149); +#266147 = CARTESIAN_POINT('',(146.440491,-123.048079,0.)); +#266148 = DIRECTION('',(0.382683766838,0.923879393968,0.)); +#266149 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#266150 = ADVANCED_FACE('',(#266151),#266176,.F.); +#266151 = FACE_BOUND('',#266152,.F.); +#266152 = EDGE_LOOP('',(#266153,#266154,#266162,#266170)); +#266153 = ORIENTED_EDGE('',*,*,#266132,.T.); +#266154 = ORIENTED_EDGE('',*,*,#266155,.T.); +#266155 = EDGE_CURVE('',#266125,#266156,#266158,.T.); +#266156 = VERTEX_POINT('',#266157); +#266157 = CARTESIAN_POINT('',(145.916853,-122.545557,-3.5E-02)); +#266158 = LINE('',#266159,#266160); +#266159 = CARTESIAN_POINT('',(146.404442,-123.033147,-3.5E-02)); +#266160 = VECTOR('',#266161,1.); +#266161 = DIRECTION('',(-0.707106056082,0.707107506291,0.)); +#266162 = ORIENTED_EDGE('',*,*,#266163,.F.); +#266163 = EDGE_CURVE('',#266164,#266156,#266166,.T.); +#266164 = VERTEX_POINT('',#266165); +#266165 = CARTESIAN_POINT('',(145.916853,-122.545557,0.)); +#266166 = LINE('',#266167,#266168); +#266167 = CARTESIAN_POINT('',(145.916853,-122.545557,0.)); +#266168 = VECTOR('',#266169,1.); +#266169 = DIRECTION('',(0.,0.,-1.)); +#266170 = ORIENTED_EDGE('',*,*,#266171,.F.); +#266171 = EDGE_CURVE('',#266133,#266164,#266172,.T.); +#266172 = LINE('',#266173,#266174); +#266173 = CARTESIAN_POINT('',(146.404442,-123.033147,0.)); +#266174 = VECTOR('',#266175,1.); +#266175 = DIRECTION('',(-0.707106056082,0.707107506291,0.)); +#266176 = PLANE('',#266177); +#266177 = AXIS2_PLACEMENT_3D('',#266178,#266179,#266180); +#266178 = CARTESIAN_POINT('',(146.404442,-123.033147,0.)); +#266179 = DIRECTION('',(0.707107506291,0.707106056082,0.)); +#266180 = DIRECTION('',(-0.707106056082,0.707107506291,0.)); +#266181 = ADVANCED_FACE('',(#266182),#266209,.T.); +#266182 = FACE_BOUND('',#266183,.F.); +#266183 = EDGE_LOOP('',(#266184,#266185,#266194,#266202)); +#266184 = ORIENTED_EDGE('',*,*,#266163,.T.); +#266185 = ORIENTED_EDGE('',*,*,#266186,.T.); +#266186 = EDGE_CURVE('',#266156,#266187,#266189,.T.); +#266187 = VERTEX_POINT('',#266188); +#266188 = CARTESIAN_POINT('',(146.055557,-122.406853,-3.5E-02)); +#266189 = CIRCLE('',#266190,0.10000001929); +#266190 = AXIS2_PLACEMENT_3D('',#266191,#266192,#266193); +#266191 = CARTESIAN_POINT('',(146.,-122.49,-3.5E-02)); +#266192 = DIRECTION('',(0.,0.,-1.)); +#266193 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#266194 = ORIENTED_EDGE('',*,*,#266195,.F.); +#266195 = EDGE_CURVE('',#266196,#266187,#266198,.T.); +#266196 = VERTEX_POINT('',#266197); +#266197 = CARTESIAN_POINT('',(146.055557,-122.406853,0.)); +#266198 = LINE('',#266199,#266200); +#266199 = CARTESIAN_POINT('',(146.055557,-122.406853,0.)); +#266200 = VECTOR('',#266201,1.); +#266201 = DIRECTION('',(0.,0.,-1.)); +#266202 = ORIENTED_EDGE('',*,*,#266203,.F.); +#266203 = EDGE_CURVE('',#266164,#266196,#266204,.T.); +#266204 = CIRCLE('',#266205,0.10000001929); +#266205 = AXIS2_PLACEMENT_3D('',#266206,#266207,#266208); +#266206 = CARTESIAN_POINT('',(146.,-122.49,0.)); +#266207 = DIRECTION('',(0.,0.,-1.)); +#266208 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#266209 = CYLINDRICAL_SURFACE('',#266210,0.10000001929); +#266210 = AXIS2_PLACEMENT_3D('',#266211,#266212,#266213); +#266211 = CARTESIAN_POINT('',(146.,-122.49,0.)); +#266212 = DIRECTION('',(-0.,-0.,1.)); +#266213 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#266214 = ADVANCED_FACE('',(#266215),#266240,.F.); +#266215 = FACE_BOUND('',#266216,.F.); +#266216 = EDGE_LOOP('',(#266217,#266218,#266226,#266234)); +#266217 = ORIENTED_EDGE('',*,*,#266195,.T.); +#266218 = ORIENTED_EDGE('',*,*,#266219,.T.); +#266219 = EDGE_CURVE('',#266187,#266220,#266222,.T.); +#266220 = VERTEX_POINT('',#266221); +#266221 = CARTESIAN_POINT('',(146.501422,-122.85,-3.5E-02)); +#266222 = LINE('',#266223,#266224); +#266223 = CARTESIAN_POINT('',(146.055557,-122.406853,-3.5E-02)); +#266224 = VECTOR('',#266225,1.); +#266225 = DIRECTION('',(0.709265322699,-0.70494163022,0.)); +#266226 = ORIENTED_EDGE('',*,*,#266227,.F.); +#266227 = EDGE_CURVE('',#266228,#266220,#266230,.T.); +#266228 = VERTEX_POINT('',#266229); +#266229 = CARTESIAN_POINT('',(146.501422,-122.85,0.)); +#266230 = LINE('',#266231,#266232); +#266231 = CARTESIAN_POINT('',(146.501422,-122.85,0.)); +#266232 = VECTOR('',#266233,1.); +#266233 = DIRECTION('',(0.,0.,-1.)); +#266234 = ORIENTED_EDGE('',*,*,#266235,.F.); +#266235 = EDGE_CURVE('',#266196,#266228,#266236,.T.); +#266236 = LINE('',#266237,#266238); +#266237 = CARTESIAN_POINT('',(146.055557,-122.406853,0.)); +#266238 = VECTOR('',#266239,1.); +#266239 = DIRECTION('',(0.709265322699,-0.70494163022,0.)); +#266240 = PLANE('',#266241); +#266241 = AXIS2_PLACEMENT_3D('',#266242,#266243,#266244); +#266242 = CARTESIAN_POINT('',(146.055557,-122.406853,0.)); +#266243 = DIRECTION('',(-0.70494163022,-0.709265322699,-0.)); +#266244 = DIRECTION('',(0.709265322699,-0.70494163022,0.)); +#266245 = ADVANCED_FACE('',(#266246),#266271,.F.); +#266246 = FACE_BOUND('',#266247,.F.); +#266247 = EDGE_LOOP('',(#266248,#266249,#266257,#266265)); +#266248 = ORIENTED_EDGE('',*,*,#266227,.T.); +#266249 = ORIENTED_EDGE('',*,*,#266250,.T.); +#266250 = EDGE_CURVE('',#266220,#266251,#266253,.T.); +#266251 = VERTEX_POINT('',#266252); +#266252 = CARTESIAN_POINT('',(146.9,-122.85,-3.5E-02)); +#266253 = LINE('',#266254,#266255); +#266254 = CARTESIAN_POINT('',(146.501422,-122.85,-3.5E-02)); +#266255 = VECTOR('',#266256,1.); +#266256 = DIRECTION('',(1.,0.,0.)); +#266257 = ORIENTED_EDGE('',*,*,#266258,.F.); +#266258 = EDGE_CURVE('',#266259,#266251,#266261,.T.); +#266259 = VERTEX_POINT('',#266260); +#266260 = CARTESIAN_POINT('',(146.9,-122.85,0.)); +#266261 = LINE('',#266262,#266263); +#266262 = CARTESIAN_POINT('',(146.9,-122.85,0.)); +#266263 = VECTOR('',#266264,1.); +#266264 = DIRECTION('',(0.,0.,-1.)); +#266265 = ORIENTED_EDGE('',*,*,#266266,.F.); +#266266 = EDGE_CURVE('',#266228,#266259,#266267,.T.); +#266267 = LINE('',#266268,#266269); +#266268 = CARTESIAN_POINT('',(146.501422,-122.85,0.)); +#266269 = VECTOR('',#266270,1.); +#266270 = DIRECTION('',(1.,0.,0.)); +#266271 = PLANE('',#266272); +#266272 = AXIS2_PLACEMENT_3D('',#266273,#266274,#266275); +#266273 = CARTESIAN_POINT('',(146.501422,-122.85,0.)); +#266274 = DIRECTION('',(0.,-1.,0.)); +#266275 = DIRECTION('',(1.,0.,0.)); +#266276 = ADVANCED_FACE('',(#266277),#266302,.F.); +#266277 = FACE_BOUND('',#266278,.F.); +#266278 = EDGE_LOOP('',(#266279,#266280,#266288,#266296)); +#266279 = ORIENTED_EDGE('',*,*,#266258,.T.); +#266280 = ORIENTED_EDGE('',*,*,#266281,.T.); +#266281 = EDGE_CURVE('',#266251,#266282,#266284,.T.); +#266282 = VERTEX_POINT('',#266283); +#266283 = CARTESIAN_POINT('',(146.9,-122.541421,-3.5E-02)); +#266284 = LINE('',#266285,#266286); +#266285 = CARTESIAN_POINT('',(146.9,-122.85,-3.5E-02)); +#266286 = VECTOR('',#266287,1.); +#266287 = DIRECTION('',(0.,1.,0.)); +#266288 = ORIENTED_EDGE('',*,*,#266289,.F.); +#266289 = EDGE_CURVE('',#266290,#266282,#266292,.T.); +#266290 = VERTEX_POINT('',#266291); +#266291 = CARTESIAN_POINT('',(146.9,-122.541421,0.)); +#266292 = LINE('',#266293,#266294); +#266293 = CARTESIAN_POINT('',(146.9,-122.541421,0.)); +#266294 = VECTOR('',#266295,1.); +#266295 = DIRECTION('',(0.,0.,-1.)); +#266296 = ORIENTED_EDGE('',*,*,#266297,.F.); +#266297 = EDGE_CURVE('',#266259,#266290,#266298,.T.); +#266298 = LINE('',#266299,#266300); +#266299 = CARTESIAN_POINT('',(146.9,-122.85,0.)); +#266300 = VECTOR('',#266301,1.); +#266301 = DIRECTION('',(0.,1.,0.)); +#266302 = PLANE('',#266303); +#266303 = AXIS2_PLACEMENT_3D('',#266304,#266305,#266306); +#266304 = CARTESIAN_POINT('',(146.9,-122.85,0.)); +#266305 = DIRECTION('',(1.,-0.,0.)); +#266306 = DIRECTION('',(0.,1.,0.)); +#266307 = ADVANCED_FACE('',(#266308),#266333,.F.); +#266308 = FACE_BOUND('',#266309,.F.); +#266309 = EDGE_LOOP('',(#266310,#266311,#266319,#266327)); +#266310 = ORIENTED_EDGE('',*,*,#266289,.T.); +#266311 = ORIENTED_EDGE('',*,*,#266312,.T.); +#266312 = EDGE_CURVE('',#266282,#266313,#266315,.T.); +#266313 = VERTEX_POINT('',#266314); +#266314 = CARTESIAN_POINT('',(146.108578,-121.75,-3.5E-02)); +#266315 = LINE('',#266316,#266317); +#266316 = CARTESIAN_POINT('',(146.9,-122.541421,-3.5E-02)); +#266317 = VECTOR('',#266318,1.); +#266318 = DIRECTION('',(-0.707107227919,0.707106334454,0.)); +#266319 = ORIENTED_EDGE('',*,*,#266320,.F.); +#266320 = EDGE_CURVE('',#266321,#266313,#266323,.T.); +#266321 = VERTEX_POINT('',#266322); +#266322 = CARTESIAN_POINT('',(146.108578,-121.75,0.)); +#266323 = LINE('',#266324,#266325); +#266324 = CARTESIAN_POINT('',(146.108578,-121.75,0.)); +#266325 = VECTOR('',#266326,1.); +#266326 = DIRECTION('',(0.,0.,-1.)); +#266327 = ORIENTED_EDGE('',*,*,#266328,.F.); +#266328 = EDGE_CURVE('',#266290,#266321,#266329,.T.); +#266329 = LINE('',#266330,#266331); +#266330 = CARTESIAN_POINT('',(146.9,-122.541421,0.)); +#266331 = VECTOR('',#266332,1.); +#266332 = DIRECTION('',(-0.707107227919,0.707106334454,0.)); +#266333 = PLANE('',#266334); +#266334 = AXIS2_PLACEMENT_3D('',#266335,#266336,#266337); +#266335 = CARTESIAN_POINT('',(146.9,-122.541421,0.)); +#266336 = DIRECTION('',(0.707106334454,0.707107227919,0.)); +#266337 = DIRECTION('',(-0.707107227919,0.707106334454,0.)); +#266338 = ADVANCED_FACE('',(#266339),#266364,.F.); +#266339 = FACE_BOUND('',#266340,.F.); +#266340 = EDGE_LOOP('',(#266341,#266342,#266350,#266358)); +#266341 = ORIENTED_EDGE('',*,*,#266320,.T.); +#266342 = ORIENTED_EDGE('',*,*,#266343,.T.); +#266343 = EDGE_CURVE('',#266313,#266344,#266346,.T.); +#266344 = VERTEX_POINT('',#266345); +#266345 = CARTESIAN_POINT('',(143.980491,-121.748079,-3.5E-02)); +#266346 = LINE('',#266347,#266348); +#266347 = CARTESIAN_POINT('',(146.108578,-121.75,-3.5E-02)); +#266348 = VECTOR('',#266349,1.); +#266349 = DIRECTION('',(-0.999999592577,9.026882910971E-04,0.)); +#266350 = ORIENTED_EDGE('',*,*,#266351,.F.); +#266351 = EDGE_CURVE('',#266352,#266344,#266354,.T.); +#266352 = VERTEX_POINT('',#266353); +#266353 = CARTESIAN_POINT('',(143.980491,-121.748079,0.)); +#266354 = LINE('',#266355,#266356); +#266355 = CARTESIAN_POINT('',(143.980491,-121.748079,0.)); +#266356 = VECTOR('',#266357,1.); +#266357 = DIRECTION('',(0.,0.,-1.)); +#266358 = ORIENTED_EDGE('',*,*,#266359,.F.); +#266359 = EDGE_CURVE('',#266321,#266352,#266360,.T.); +#266360 = LINE('',#266361,#266362); +#266361 = CARTESIAN_POINT('',(146.108578,-121.75,0.)); +#266362 = VECTOR('',#266363,1.); +#266363 = DIRECTION('',(-0.999999592577,9.026882910971E-04,0.)); +#266364 = PLANE('',#266365); +#266365 = AXIS2_PLACEMENT_3D('',#266366,#266367,#266368); +#266366 = CARTESIAN_POINT('',(146.108578,-121.75,0.)); +#266367 = DIRECTION('',(9.026882910971E-04,0.999999592577,0.)); +#266368 = DIRECTION('',(-0.999999592577,9.026882910971E-04,0.)); +#266369 = ADVANCED_FACE('',(#266370),#266397,.T.); +#266370 = FACE_BOUND('',#266371,.F.); +#266371 = EDGE_LOOP('',(#266372,#266373,#266382,#266390)); +#266372 = ORIENTED_EDGE('',*,*,#266351,.T.); +#266373 = ORIENTED_EDGE('',*,*,#266374,.T.); +#266374 = EDGE_CURVE('',#266344,#266375,#266377,.T.); +#266375 = VERTEX_POINT('',#266376); +#266376 = CARTESIAN_POINT('',(143.980491,-121.551921,-3.5E-02)); +#266377 = CIRCLE('',#266378,0.100000456609); +#266378 = AXIS2_PLACEMENT_3D('',#266379,#266380,#266381); +#266379 = CARTESIAN_POINT('',(144.,-121.65,-3.5E-02)); +#266380 = DIRECTION('',(0.,0.,-1.)); +#266381 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#266382 = ORIENTED_EDGE('',*,*,#266383,.F.); +#266383 = EDGE_CURVE('',#266384,#266375,#266386,.T.); +#266384 = VERTEX_POINT('',#266385); +#266385 = CARTESIAN_POINT('',(143.980491,-121.551921,0.)); +#266386 = LINE('',#266387,#266388); +#266387 = CARTESIAN_POINT('',(143.980491,-121.551921,0.)); +#266388 = VECTOR('',#266389,1.); +#266389 = DIRECTION('',(0.,0.,-1.)); +#266390 = ORIENTED_EDGE('',*,*,#266391,.F.); +#266391 = EDGE_CURVE('',#266352,#266384,#266392,.T.); +#266392 = CIRCLE('',#266393,0.100000456609); +#266393 = AXIS2_PLACEMENT_3D('',#266394,#266395,#266396); +#266394 = CARTESIAN_POINT('',(144.,-121.65,0.)); +#266395 = DIRECTION('',(0.,0.,-1.)); +#266396 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#266397 = CYLINDRICAL_SURFACE('',#266398,0.100000456609); +#266398 = AXIS2_PLACEMENT_3D('',#266399,#266400,#266401); +#266399 = CARTESIAN_POINT('',(144.,-121.65,0.)); +#266400 = DIRECTION('',(-0.,-0.,1.)); +#266401 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#266402 = ADVANCED_FACE('',(#266403),#266428,.F.); +#266403 = FACE_BOUND('',#266404,.F.); +#266404 = EDGE_LOOP('',(#266405,#266406,#266414,#266422)); +#266405 = ORIENTED_EDGE('',*,*,#266383,.T.); +#266406 = ORIENTED_EDGE('',*,*,#266407,.T.); +#266407 = EDGE_CURVE('',#266375,#266408,#266410,.T.); +#266408 = VERTEX_POINT('',#266409); +#266409 = CARTESIAN_POINT('',(146.108578,-121.55,-3.5E-02)); +#266410 = LINE('',#266411,#266412); +#266411 = CARTESIAN_POINT('',(143.980491,-121.551921,-3.5E-02)); +#266412 = VECTOR('',#266413,1.); +#266413 = DIRECTION('',(0.999999592577,9.026882910971E-04,0.)); +#266414 = ORIENTED_EDGE('',*,*,#266415,.F.); +#266415 = EDGE_CURVE('',#266416,#266408,#266418,.T.); +#266416 = VERTEX_POINT('',#266417); +#266417 = CARTESIAN_POINT('',(146.108578,-121.55,0.)); +#266418 = LINE('',#266419,#266420); +#266419 = CARTESIAN_POINT('',(146.108578,-121.55,0.)); +#266420 = VECTOR('',#266421,1.); +#266421 = DIRECTION('',(0.,0.,-1.)); +#266422 = ORIENTED_EDGE('',*,*,#266423,.F.); +#266423 = EDGE_CURVE('',#266384,#266416,#266424,.T.); +#266424 = LINE('',#266425,#266426); +#266425 = CARTESIAN_POINT('',(143.980491,-121.551921,0.)); +#266426 = VECTOR('',#266427,1.); +#266427 = DIRECTION('',(0.999999592577,9.026882910971E-04,0.)); +#266428 = PLANE('',#266429); +#266429 = AXIS2_PLACEMENT_3D('',#266430,#266431,#266432); +#266430 = CARTESIAN_POINT('',(143.980491,-121.551921,0.)); +#266431 = DIRECTION('',(9.026882910971E-04,-0.999999592577,0.)); +#266432 = DIRECTION('',(0.999999592577,9.026882910971E-04,0.)); +#266433 = ADVANCED_FACE('',(#266434),#266459,.F.); +#266434 = FACE_BOUND('',#266435,.F.); +#266435 = EDGE_LOOP('',(#266436,#266437,#266445,#266453)); +#266436 = ORIENTED_EDGE('',*,*,#266415,.T.); +#266437 = ORIENTED_EDGE('',*,*,#266438,.T.); +#266438 = EDGE_CURVE('',#266408,#266439,#266441,.T.); +#266439 = VERTEX_POINT('',#266440); +#266440 = CARTESIAN_POINT('',(146.35,-121.308578,-3.5E-02)); +#266441 = LINE('',#266442,#266443); +#266442 = CARTESIAN_POINT('',(146.108578,-121.55,-3.5E-02)); +#266443 = VECTOR('',#266444,1.); +#266444 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266445 = ORIENTED_EDGE('',*,*,#266446,.F.); +#266446 = EDGE_CURVE('',#266447,#266439,#266449,.T.); +#266447 = VERTEX_POINT('',#266448); +#266448 = CARTESIAN_POINT('',(146.35,-121.308578,0.)); +#266449 = LINE('',#266450,#266451); +#266450 = CARTESIAN_POINT('',(146.35,-121.308578,0.)); +#266451 = VECTOR('',#266452,1.); +#266452 = DIRECTION('',(0.,0.,-1.)); +#266453 = ORIENTED_EDGE('',*,*,#266454,.F.); +#266454 = EDGE_CURVE('',#266416,#266447,#266455,.T.); +#266455 = LINE('',#266456,#266457); +#266456 = CARTESIAN_POINT('',(146.108578,-121.55,0.)); +#266457 = VECTOR('',#266458,1.); +#266458 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266459 = PLANE('',#266460); +#266460 = AXIS2_PLACEMENT_3D('',#266461,#266462,#266463); +#266461 = CARTESIAN_POINT('',(146.108578,-121.55,0.)); +#266462 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#266463 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266464 = ADVANCED_FACE('',(#266465),#266490,.F.); +#266465 = FACE_BOUND('',#266466,.F.); +#266466 = EDGE_LOOP('',(#266467,#266468,#266476,#266484)); +#266467 = ORIENTED_EDGE('',*,*,#266446,.T.); +#266468 = ORIENTED_EDGE('',*,*,#266469,.T.); +#266469 = EDGE_CURVE('',#266439,#266470,#266472,.T.); +#266470 = VERTEX_POINT('',#266471); +#266471 = CARTESIAN_POINT('',(146.351921,-120.740491,-3.5E-02)); +#266472 = LINE('',#266473,#266474); +#266473 = CARTESIAN_POINT('',(146.35,-121.308578,-3.5E-02)); +#266474 = VECTOR('',#266475,1.); +#266475 = DIRECTION('',(3.381504975591E-03,0.999994282696,0.)); +#266476 = ORIENTED_EDGE('',*,*,#266477,.F.); +#266477 = EDGE_CURVE('',#266478,#266470,#266480,.T.); +#266478 = VERTEX_POINT('',#266479); +#266479 = CARTESIAN_POINT('',(146.351921,-120.740491,0.)); +#266480 = LINE('',#266481,#266482); +#266481 = CARTESIAN_POINT('',(146.351921,-120.740491,0.)); +#266482 = VECTOR('',#266483,1.); +#266483 = DIRECTION('',(0.,0.,-1.)); +#266484 = ORIENTED_EDGE('',*,*,#266485,.F.); +#266485 = EDGE_CURVE('',#266447,#266478,#266486,.T.); +#266486 = LINE('',#266487,#266488); +#266487 = CARTESIAN_POINT('',(146.35,-121.308578,0.)); +#266488 = VECTOR('',#266489,1.); +#266489 = DIRECTION('',(3.381504975591E-03,0.999994282696,0.)); +#266490 = PLANE('',#266491); +#266491 = AXIS2_PLACEMENT_3D('',#266492,#266493,#266494); +#266492 = CARTESIAN_POINT('',(146.35,-121.308578,0.)); +#266493 = DIRECTION('',(0.999994282696,-3.381504975591E-03,0.)); +#266494 = DIRECTION('',(3.381504975591E-03,0.999994282696,0.)); +#266495 = ADVANCED_FACE('',(#266496),#266521,.F.); +#266496 = FACE_BOUND('',#266497,.F.); +#266497 = EDGE_LOOP('',(#266498,#266499,#266507,#266515)); +#266498 = ORIENTED_EDGE('',*,*,#266477,.T.); +#266499 = ORIENTED_EDGE('',*,*,#266500,.T.); +#266500 = EDGE_CURVE('',#266470,#266501,#266503,.T.); +#266501 = VERTEX_POINT('',#266502); +#266502 = CARTESIAN_POINT('',(146.366853,-120.704443,-3.5E-02)); +#266503 = LINE('',#266504,#266505); +#266504 = CARTESIAN_POINT('',(146.351921,-120.740491,-3.5E-02)); +#266505 = VECTOR('',#266506,1.); +#266506 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266507 = ORIENTED_EDGE('',*,*,#266508,.F.); +#266508 = EDGE_CURVE('',#266509,#266501,#266511,.T.); +#266509 = VERTEX_POINT('',#266510); +#266510 = CARTESIAN_POINT('',(146.366853,-120.704443,0.)); +#266511 = LINE('',#266512,#266513); +#266512 = CARTESIAN_POINT('',(146.366853,-120.704443,0.)); +#266513 = VECTOR('',#266514,1.); +#266514 = DIRECTION('',(0.,0.,-1.)); +#266515 = ORIENTED_EDGE('',*,*,#266516,.F.); +#266516 = EDGE_CURVE('',#266478,#266509,#266517,.T.); +#266517 = LINE('',#266518,#266519); +#266518 = CARTESIAN_POINT('',(146.351921,-120.740491,0.)); +#266519 = VECTOR('',#266520,1.); +#266520 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266521 = PLANE('',#266522); +#266522 = AXIS2_PLACEMENT_3D('',#266523,#266524,#266525); +#266523 = CARTESIAN_POINT('',(146.351921,-120.740491,0.)); +#266524 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#266525 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266526 = ADVANCED_FACE('',(#266527),#266543,.F.); +#266527 = FACE_BOUND('',#266528,.F.); +#266528 = EDGE_LOOP('',(#266529,#266530,#266536,#266537)); +#266529 = ORIENTED_EDGE('',*,*,#266508,.T.); +#266530 = ORIENTED_EDGE('',*,*,#266531,.T.); +#266531 = EDGE_CURVE('',#266501,#265584,#266532,.T.); +#266532 = LINE('',#266533,#266534); +#266533 = CARTESIAN_POINT('',(146.366853,-120.704443,-3.5E-02)); +#266534 = VECTOR('',#266535,1.); +#266535 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266536 = ORIENTED_EDGE('',*,*,#265581,.F.); +#266537 = ORIENTED_EDGE('',*,*,#266538,.F.); +#266538 = EDGE_CURVE('',#266509,#265582,#266539,.T.); +#266539 = LINE('',#266540,#266541); +#266540 = CARTESIAN_POINT('',(146.366853,-120.704443,0.)); +#266541 = VECTOR('',#266542,1.); +#266542 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266543 = PLANE('',#266544); +#266544 = AXIS2_PLACEMENT_3D('',#266545,#266546,#266547); +#266545 = CARTESIAN_POINT('',(146.366853,-120.704443,0.)); +#266546 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#266547 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266548 = ADVANCED_FACE('',(#266549),#266582,.F.); +#266549 = FACE_BOUND('',#266550,.F.); +#266550 = EDGE_LOOP('',(#266551,#266552,#266553,#266554,#266555,#266556, + #266557,#266558,#266559,#266560,#266561,#266562,#266563,#266564, + #266565,#266566,#266567,#266568,#266569,#266570,#266571,#266572, + #266573,#266574,#266575,#266576,#266577,#266578,#266579,#266580, + #266581)); +#266551 = ORIENTED_EDGE('',*,*,#265608,.T.); +#266552 = ORIENTED_EDGE('',*,*,#265640,.T.); +#266553 = ORIENTED_EDGE('',*,*,#265671,.T.); +#266554 = ORIENTED_EDGE('',*,*,#265702,.T.); +#266555 = ORIENTED_EDGE('',*,*,#265733,.T.); +#266556 = ORIENTED_EDGE('',*,*,#265764,.T.); +#266557 = ORIENTED_EDGE('',*,*,#265795,.T.); +#266558 = ORIENTED_EDGE('',*,*,#265826,.T.); +#266559 = ORIENTED_EDGE('',*,*,#265857,.T.); +#266560 = ORIENTED_EDGE('',*,*,#265889,.T.); +#266561 = ORIENTED_EDGE('',*,*,#265921,.T.); +#266562 = ORIENTED_EDGE('',*,*,#265952,.T.); +#266563 = ORIENTED_EDGE('',*,*,#265983,.T.); +#266564 = ORIENTED_EDGE('',*,*,#266014,.T.); +#266565 = ORIENTED_EDGE('',*,*,#266046,.T.); +#266566 = ORIENTED_EDGE('',*,*,#266078,.T.); +#266567 = ORIENTED_EDGE('',*,*,#266109,.T.); +#266568 = ORIENTED_EDGE('',*,*,#266140,.T.); +#266569 = ORIENTED_EDGE('',*,*,#266171,.T.); +#266570 = ORIENTED_EDGE('',*,*,#266203,.T.); +#266571 = ORIENTED_EDGE('',*,*,#266235,.T.); +#266572 = ORIENTED_EDGE('',*,*,#266266,.T.); +#266573 = ORIENTED_EDGE('',*,*,#266297,.T.); +#266574 = ORIENTED_EDGE('',*,*,#266328,.T.); +#266575 = ORIENTED_EDGE('',*,*,#266359,.T.); +#266576 = ORIENTED_EDGE('',*,*,#266391,.T.); +#266577 = ORIENTED_EDGE('',*,*,#266423,.T.); +#266578 = ORIENTED_EDGE('',*,*,#266454,.T.); +#266579 = ORIENTED_EDGE('',*,*,#266485,.T.); +#266580 = ORIENTED_EDGE('',*,*,#266516,.T.); +#266581 = ORIENTED_EDGE('',*,*,#266538,.T.); +#266582 = PLANE('',#266583); +#266583 = AXIS2_PLACEMENT_3D('',#266584,#266585,#266586); +#266584 = CARTESIAN_POINT('',(0.,0.,0.)); +#266585 = DIRECTION('',(-0.,-0.,-1.)); +#266586 = DIRECTION('',(-1.,0.,0.)); +#266587 = ADVANCED_FACE('',(#266588),#266621,.T.); +#266588 = FACE_BOUND('',#266589,.T.); +#266589 = EDGE_LOOP('',(#266590,#266591,#266592,#266593,#266594,#266595, + #266596,#266597,#266598,#266599,#266600,#266601,#266602,#266603, + #266604,#266605,#266606,#266607,#266608,#266609,#266610,#266611, + #266612,#266613,#266614,#266615,#266616,#266617,#266618,#266619, + #266620)); +#266590 = ORIENTED_EDGE('',*,*,#265591,.T.); +#266591 = ORIENTED_EDGE('',*,*,#265624,.T.); +#266592 = ORIENTED_EDGE('',*,*,#265655,.T.); +#266593 = ORIENTED_EDGE('',*,*,#265686,.T.); +#266594 = ORIENTED_EDGE('',*,*,#265717,.T.); +#266595 = ORIENTED_EDGE('',*,*,#265748,.T.); +#266596 = ORIENTED_EDGE('',*,*,#265779,.T.); +#266597 = ORIENTED_EDGE('',*,*,#265810,.T.); +#266598 = ORIENTED_EDGE('',*,*,#265841,.T.); +#266599 = ORIENTED_EDGE('',*,*,#265872,.T.); +#266600 = ORIENTED_EDGE('',*,*,#265905,.T.); +#266601 = ORIENTED_EDGE('',*,*,#265936,.T.); +#266602 = ORIENTED_EDGE('',*,*,#265967,.T.); +#266603 = ORIENTED_EDGE('',*,*,#265998,.T.); +#266604 = ORIENTED_EDGE('',*,*,#266029,.T.); +#266605 = ORIENTED_EDGE('',*,*,#266062,.T.); +#266606 = ORIENTED_EDGE('',*,*,#266093,.T.); +#266607 = ORIENTED_EDGE('',*,*,#266124,.T.); +#266608 = ORIENTED_EDGE('',*,*,#266155,.T.); +#266609 = ORIENTED_EDGE('',*,*,#266186,.T.); +#266610 = ORIENTED_EDGE('',*,*,#266219,.T.); +#266611 = ORIENTED_EDGE('',*,*,#266250,.T.); +#266612 = ORIENTED_EDGE('',*,*,#266281,.T.); +#266613 = ORIENTED_EDGE('',*,*,#266312,.T.); +#266614 = ORIENTED_EDGE('',*,*,#266343,.T.); +#266615 = ORIENTED_EDGE('',*,*,#266374,.T.); +#266616 = ORIENTED_EDGE('',*,*,#266407,.T.); +#266617 = ORIENTED_EDGE('',*,*,#266438,.T.); +#266618 = ORIENTED_EDGE('',*,*,#266469,.T.); +#266619 = ORIENTED_EDGE('',*,*,#266500,.T.); +#266620 = ORIENTED_EDGE('',*,*,#266531,.T.); +#266621 = PLANE('',#266622); +#266622 = AXIS2_PLACEMENT_3D('',#266623,#266624,#266625); +#266623 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#266624 = DIRECTION('',(-0.,-0.,-1.)); +#266625 = DIRECTION('',(-1.,0.,0.)); +#266626 = MANIFOLD_SOLID_BREP('',#266627); +#266627 = CLOSED_SHELL('',(#266628,#266670,#266701,#266732,#266763, + #266796,#266827,#266858,#266889,#266911,#266928)); +#266628 = ADVANCED_FACE('',(#266629),#266665,.T.); +#266629 = FACE_BOUND('',#266630,.T.); +#266630 = EDGE_LOOP('',(#266631,#266641,#266650,#266658)); +#266631 = ORIENTED_EDGE('',*,*,#266632,.T.); +#266632 = EDGE_CURVE('',#266633,#266635,#266637,.T.); +#266633 = VERTEX_POINT('',#266634); +#266634 = CARTESIAN_POINT('',(148.194443,-153.176853,1.51)); +#266635 = VERTEX_POINT('',#266636); +#266636 = CARTESIAN_POINT('',(148.194443,-153.176853,1.545)); +#266637 = LINE('',#266638,#266639); +#266638 = CARTESIAN_POINT('',(148.194443,-153.176853,1.51)); +#266639 = VECTOR('',#266640,1.); +#266640 = DIRECTION('',(0.,0.,1.)); +#266641 = ORIENTED_EDGE('',*,*,#266642,.T.); +#266642 = EDGE_CURVE('',#266635,#266643,#266645,.T.); +#266643 = VERTEX_POINT('',#266644); +#266644 = CARTESIAN_POINT('',(148.348079,-153.240491,1.545)); +#266645 = CIRCLE('',#266646,0.100000590676); +#266646 = AXIS2_PLACEMENT_3D('',#266647,#266648,#266649); +#266647 = CARTESIAN_POINT('',(148.25,-153.2600006871,1.545)); +#266648 = DIRECTION('',(0.,0.,-1.)); +#266649 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#266650 = ORIENTED_EDGE('',*,*,#266651,.F.); +#266651 = EDGE_CURVE('',#266652,#266643,#266654,.T.); +#266652 = VERTEX_POINT('',#266653); +#266653 = CARTESIAN_POINT('',(148.348079,-153.240491,1.51)); +#266654 = LINE('',#266655,#266656); +#266655 = CARTESIAN_POINT('',(148.348079,-153.240491,1.51)); +#266656 = VECTOR('',#266657,1.); +#266657 = DIRECTION('',(0.,0.,1.)); +#266658 = ORIENTED_EDGE('',*,*,#266659,.F.); +#266659 = EDGE_CURVE('',#266633,#266652,#266660,.T.); +#266660 = CIRCLE('',#266661,0.100000590676); +#266661 = AXIS2_PLACEMENT_3D('',#266662,#266663,#266664); +#266662 = CARTESIAN_POINT('',(148.25,-153.2600006871,1.51)); +#266663 = DIRECTION('',(0.,0.,-1.)); +#266664 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#266665 = CYLINDRICAL_SURFACE('',#266666,0.100000590676); +#266666 = AXIS2_PLACEMENT_3D('',#266667,#266668,#266669); +#266667 = CARTESIAN_POINT('',(148.25,-153.2600006871,1.51)); +#266668 = DIRECTION('',(0.,0.,-1.)); +#266669 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#266670 = ADVANCED_FACE('',(#266671),#266696,.T.); +#266671 = FACE_BOUND('',#266672,.T.); +#266672 = EDGE_LOOP('',(#266673,#266674,#266682,#266690)); +#266673 = ORIENTED_EDGE('',*,*,#266651,.T.); +#266674 = ORIENTED_EDGE('',*,*,#266675,.T.); +#266675 = EDGE_CURVE('',#266643,#266676,#266678,.T.); +#266676 = VERTEX_POINT('',#266677); +#266677 = CARTESIAN_POINT('',(148.348079,-155.019509,1.545)); +#266678 = LINE('',#266679,#266680); +#266679 = CARTESIAN_POINT('',(148.348079,-153.240491,1.545)); +#266680 = VECTOR('',#266681,1.); +#266681 = DIRECTION('',(0.,-1.,0.)); +#266682 = ORIENTED_EDGE('',*,*,#266683,.F.); +#266683 = EDGE_CURVE('',#266684,#266676,#266686,.T.); +#266684 = VERTEX_POINT('',#266685); +#266685 = CARTESIAN_POINT('',(148.348079,-155.019509,1.51)); +#266686 = LINE('',#266687,#266688); +#266687 = CARTESIAN_POINT('',(148.348079,-155.019509,1.51)); +#266688 = VECTOR('',#266689,1.); +#266689 = DIRECTION('',(0.,0.,1.)); +#266690 = ORIENTED_EDGE('',*,*,#266691,.F.); +#266691 = EDGE_CURVE('',#266652,#266684,#266692,.T.); +#266692 = LINE('',#266693,#266694); +#266693 = CARTESIAN_POINT('',(148.348079,-153.240491,1.51)); +#266694 = VECTOR('',#266695,1.); +#266695 = DIRECTION('',(0.,-1.,0.)); +#266696 = PLANE('',#266697); +#266697 = AXIS2_PLACEMENT_3D('',#266698,#266699,#266700); +#266698 = CARTESIAN_POINT('',(148.348079,-153.240491,1.51)); +#266699 = DIRECTION('',(1.,0.,-0.)); +#266700 = DIRECTION('',(0.,-1.,0.)); +#266701 = ADVANCED_FACE('',(#266702),#266727,.T.); +#266702 = FACE_BOUND('',#266703,.T.); +#266703 = EDGE_LOOP('',(#266704,#266705,#266713,#266721)); +#266704 = ORIENTED_EDGE('',*,*,#266683,.T.); +#266705 = ORIENTED_EDGE('',*,*,#266706,.T.); +#266706 = EDGE_CURVE('',#266676,#266707,#266709,.T.); +#266707 = VERTEX_POINT('',#266708); +#266708 = CARTESIAN_POINT('',(148.333147,-155.055558,1.545)); +#266709 = LINE('',#266710,#266711); +#266710 = CARTESIAN_POINT('',(148.348079,-155.019509,1.545)); +#266711 = VECTOR('',#266712,1.); +#266712 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#266713 = ORIENTED_EDGE('',*,*,#266714,.F.); +#266714 = EDGE_CURVE('',#266715,#266707,#266717,.T.); +#266715 = VERTEX_POINT('',#266716); +#266716 = CARTESIAN_POINT('',(148.333147,-155.055558,1.51)); +#266717 = LINE('',#266718,#266719); +#266718 = CARTESIAN_POINT('',(148.333147,-155.055558,1.51)); +#266719 = VECTOR('',#266720,1.); +#266720 = DIRECTION('',(0.,0.,1.)); +#266721 = ORIENTED_EDGE('',*,*,#266722,.F.); +#266722 = EDGE_CURVE('',#266684,#266715,#266723,.T.); +#266723 = LINE('',#266724,#266725); +#266724 = CARTESIAN_POINT('',(148.348079,-155.019509,1.51)); +#266725 = VECTOR('',#266726,1.); +#266726 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#266727 = PLANE('',#266728); +#266728 = AXIS2_PLACEMENT_3D('',#266729,#266730,#266731); +#266729 = CARTESIAN_POINT('',(148.348079,-155.019509,1.51)); +#266730 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#266731 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#266732 = ADVANCED_FACE('',(#266733),#266758,.T.); +#266733 = FACE_BOUND('',#266734,.T.); +#266734 = EDGE_LOOP('',(#266735,#266736,#266744,#266752)); +#266735 = ORIENTED_EDGE('',*,*,#266714,.T.); +#266736 = ORIENTED_EDGE('',*,*,#266737,.T.); +#266737 = EDGE_CURVE('',#266707,#266738,#266740,.T.); +#266738 = VERTEX_POINT('',#266739); +#266739 = CARTESIAN_POINT('',(147.555557,-155.833147,1.545)); +#266740 = LINE('',#266741,#266742); +#266741 = CARTESIAN_POINT('',(148.333147,-155.055558,1.545)); +#266742 = VECTOR('',#266743,1.); +#266743 = DIRECTION('',(-0.707107235865,-0.707106326508,0.)); +#266744 = ORIENTED_EDGE('',*,*,#266745,.F.); +#266745 = EDGE_CURVE('',#266746,#266738,#266748,.T.); +#266746 = VERTEX_POINT('',#266747); +#266747 = CARTESIAN_POINT('',(147.555557,-155.833147,1.51)); +#266748 = LINE('',#266749,#266750); +#266749 = CARTESIAN_POINT('',(147.555557,-155.833147,1.51)); +#266750 = VECTOR('',#266751,1.); +#266751 = DIRECTION('',(0.,0.,1.)); +#266752 = ORIENTED_EDGE('',*,*,#266753,.F.); +#266753 = EDGE_CURVE('',#266715,#266746,#266754,.T.); +#266754 = LINE('',#266755,#266756); +#266755 = CARTESIAN_POINT('',(148.333147,-155.055558,1.51)); +#266756 = VECTOR('',#266757,1.); +#266757 = DIRECTION('',(-0.707107235865,-0.707106326508,0.)); +#266758 = PLANE('',#266759); +#266759 = AXIS2_PLACEMENT_3D('',#266760,#266761,#266762); +#266760 = CARTESIAN_POINT('',(148.333147,-155.055558,1.51)); +#266761 = DIRECTION('',(0.707106326508,-0.707107235865,0.)); +#266762 = DIRECTION('',(-0.707107235865,-0.707106326508,0.)); +#266763 = ADVANCED_FACE('',(#266764),#266791,.T.); +#266764 = FACE_BOUND('',#266765,.T.); +#266765 = EDGE_LOOP('',(#266766,#266767,#266776,#266784)); +#266766 = ORIENTED_EDGE('',*,*,#266745,.T.); +#266767 = ORIENTED_EDGE('',*,*,#266768,.T.); +#266768 = EDGE_CURVE('',#266738,#266769,#266771,.T.); +#266769 = VERTEX_POINT('',#266770); +#266770 = CARTESIAN_POINT('',(147.416853,-155.694443,1.545)); +#266771 = CIRCLE('',#266772,0.10000001929); +#266772 = AXIS2_PLACEMENT_3D('',#266773,#266774,#266775); +#266773 = CARTESIAN_POINT('',(147.5,-155.75,1.545)); +#266774 = DIRECTION('',(0.,0.,-1.)); +#266775 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#266776 = ORIENTED_EDGE('',*,*,#266777,.F.); +#266777 = EDGE_CURVE('',#266778,#266769,#266780,.T.); +#266778 = VERTEX_POINT('',#266779); +#266779 = CARTESIAN_POINT('',(147.416853,-155.694443,1.51)); +#266780 = LINE('',#266781,#266782); +#266781 = CARTESIAN_POINT('',(147.416853,-155.694443,1.51)); +#266782 = VECTOR('',#266783,1.); +#266783 = DIRECTION('',(0.,0.,1.)); +#266784 = ORIENTED_EDGE('',*,*,#266785,.F.); +#266785 = EDGE_CURVE('',#266746,#266778,#266786,.T.); +#266786 = CIRCLE('',#266787,0.10000001929); +#266787 = AXIS2_PLACEMENT_3D('',#266788,#266789,#266790); +#266788 = CARTESIAN_POINT('',(147.5,-155.75,1.51)); +#266789 = DIRECTION('',(0.,0.,-1.)); +#266790 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#266791 = CYLINDRICAL_SURFACE('',#266792,0.10000001929); +#266792 = AXIS2_PLACEMENT_3D('',#266793,#266794,#266795); +#266793 = CARTESIAN_POINT('',(147.5,-155.75,1.51)); +#266794 = DIRECTION('',(0.,0.,-1.)); +#266795 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#266796 = ADVANCED_FACE('',(#266797),#266822,.T.); +#266797 = FACE_BOUND('',#266798,.T.); +#266798 = EDGE_LOOP('',(#266799,#266800,#266808,#266816)); +#266799 = ORIENTED_EDGE('',*,*,#266777,.T.); +#266800 = ORIENTED_EDGE('',*,*,#266801,.T.); +#266801 = EDGE_CURVE('',#266769,#266802,#266804,.T.); +#266802 = VERTEX_POINT('',#266803); +#266803 = CARTESIAN_POINT('',(148.15,-154.958578,1.545)); +#266804 = LINE('',#266805,#266806); +#266805 = CARTESIAN_POINT('',(147.416853,-155.694443,1.545)); +#266806 = VECTOR('',#266807,1.); +#266807 = DIRECTION('',(0.705797267769,0.708413873953,0.)); +#266808 = ORIENTED_EDGE('',*,*,#266809,.F.); +#266809 = EDGE_CURVE('',#266810,#266802,#266812,.T.); +#266810 = VERTEX_POINT('',#266811); +#266811 = CARTESIAN_POINT('',(148.15,-154.958578,1.51)); +#266812 = LINE('',#266813,#266814); +#266813 = CARTESIAN_POINT('',(148.15,-154.958578,1.51)); +#266814 = VECTOR('',#266815,1.); +#266815 = DIRECTION('',(0.,0.,1.)); +#266816 = ORIENTED_EDGE('',*,*,#266817,.F.); +#266817 = EDGE_CURVE('',#266778,#266810,#266818,.T.); +#266818 = LINE('',#266819,#266820); +#266819 = CARTESIAN_POINT('',(147.416853,-155.694443,1.51)); +#266820 = VECTOR('',#266821,1.); +#266821 = DIRECTION('',(0.705797267769,0.708413873953,0.)); +#266822 = PLANE('',#266823); +#266823 = AXIS2_PLACEMENT_3D('',#266824,#266825,#266826); +#266824 = CARTESIAN_POINT('',(147.416853,-155.694443,1.51)); +#266825 = DIRECTION('',(-0.708413873953,0.705797267769,0.)); +#266826 = DIRECTION('',(0.705797267769,0.708413873953,0.)); +#266827 = ADVANCED_FACE('',(#266828),#266853,.T.); +#266828 = FACE_BOUND('',#266829,.T.); +#266829 = EDGE_LOOP('',(#266830,#266831,#266839,#266847)); +#266830 = ORIENTED_EDGE('',*,*,#266809,.T.); +#266831 = ORIENTED_EDGE('',*,*,#266832,.T.); +#266832 = EDGE_CURVE('',#266802,#266833,#266835,.T.); +#266833 = VERTEX_POINT('',#266834); +#266834 = CARTESIAN_POINT('',(148.151921,-153.240491,1.545)); +#266835 = LINE('',#266836,#266837); +#266836 = CARTESIAN_POINT('',(148.15,-154.958578,1.545)); +#266837 = VECTOR('',#266838,1.); +#266838 = DIRECTION('',(1.118103331908E-03,0.999999374922,0.)); +#266839 = ORIENTED_EDGE('',*,*,#266840,.F.); +#266840 = EDGE_CURVE('',#266841,#266833,#266843,.T.); +#266841 = VERTEX_POINT('',#266842); +#266842 = CARTESIAN_POINT('',(148.151921,-153.240491,1.51)); +#266843 = LINE('',#266844,#266845); +#266844 = CARTESIAN_POINT('',(148.151921,-153.240491,1.51)); +#266845 = VECTOR('',#266846,1.); +#266846 = DIRECTION('',(0.,0.,1.)); +#266847 = ORIENTED_EDGE('',*,*,#266848,.F.); +#266848 = EDGE_CURVE('',#266810,#266841,#266849,.T.); +#266849 = LINE('',#266850,#266851); +#266850 = CARTESIAN_POINT('',(148.15,-154.958578,1.51)); +#266851 = VECTOR('',#266852,1.); +#266852 = DIRECTION('',(1.118103331908E-03,0.999999374922,0.)); +#266853 = PLANE('',#266854); +#266854 = AXIS2_PLACEMENT_3D('',#266855,#266856,#266857); +#266855 = CARTESIAN_POINT('',(148.15,-154.958578,1.51)); +#266856 = DIRECTION('',(-0.999999374922,1.118103331908E-03,0.)); +#266857 = DIRECTION('',(1.118103331908E-03,0.999999374922,0.)); +#266858 = ADVANCED_FACE('',(#266859),#266884,.T.); +#266859 = FACE_BOUND('',#266860,.T.); +#266860 = EDGE_LOOP('',(#266861,#266862,#266870,#266878)); +#266861 = ORIENTED_EDGE('',*,*,#266840,.T.); +#266862 = ORIENTED_EDGE('',*,*,#266863,.T.); +#266863 = EDGE_CURVE('',#266833,#266864,#266866,.T.); +#266864 = VERTEX_POINT('',#266865); +#266865 = CARTESIAN_POINT('',(148.166853,-153.204443,1.545)); +#266866 = LINE('',#266867,#266868); +#266867 = CARTESIAN_POINT('',(148.151921,-153.240491,1.545)); +#266868 = VECTOR('',#266869,1.); +#266869 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266870 = ORIENTED_EDGE('',*,*,#266871,.F.); +#266871 = EDGE_CURVE('',#266872,#266864,#266874,.T.); +#266872 = VERTEX_POINT('',#266873); +#266873 = CARTESIAN_POINT('',(148.166853,-153.204443,1.51)); +#266874 = LINE('',#266875,#266876); +#266875 = CARTESIAN_POINT('',(148.166853,-153.204443,1.51)); +#266876 = VECTOR('',#266877,1.); +#266877 = DIRECTION('',(0.,0.,1.)); +#266878 = ORIENTED_EDGE('',*,*,#266879,.F.); +#266879 = EDGE_CURVE('',#266841,#266872,#266880,.T.); +#266880 = LINE('',#266881,#266882); +#266881 = CARTESIAN_POINT('',(148.151921,-153.240491,1.51)); +#266882 = VECTOR('',#266883,1.); +#266883 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266884 = PLANE('',#266885); +#266885 = AXIS2_PLACEMENT_3D('',#266886,#266887,#266888); +#266886 = CARTESIAN_POINT('',(148.151921,-153.240491,1.51)); +#266887 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#266888 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#266889 = ADVANCED_FACE('',(#266890),#266906,.T.); +#266890 = FACE_BOUND('',#266891,.T.); +#266891 = EDGE_LOOP('',(#266892,#266893,#266899,#266900)); +#266892 = ORIENTED_EDGE('',*,*,#266871,.T.); +#266893 = ORIENTED_EDGE('',*,*,#266894,.T.); +#266894 = EDGE_CURVE('',#266864,#266635,#266895,.T.); +#266895 = LINE('',#266896,#266897); +#266896 = CARTESIAN_POINT('',(148.166853,-153.204443,1.545)); +#266897 = VECTOR('',#266898,1.); +#266898 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266899 = ORIENTED_EDGE('',*,*,#266632,.F.); +#266900 = ORIENTED_EDGE('',*,*,#266901,.F.); +#266901 = EDGE_CURVE('',#266872,#266633,#266902,.T.); +#266902 = LINE('',#266903,#266904); +#266903 = CARTESIAN_POINT('',(148.166853,-153.204443,1.51)); +#266904 = VECTOR('',#266905,1.); +#266905 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266906 = PLANE('',#266907); +#266907 = AXIS2_PLACEMENT_3D('',#266908,#266909,#266910); +#266908 = CARTESIAN_POINT('',(148.166853,-153.204443,1.51)); +#266909 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#266910 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#266911 = ADVANCED_FACE('',(#266912),#266923,.F.); +#266912 = FACE_BOUND('',#266913,.T.); +#266913 = EDGE_LOOP('',(#266914,#266915,#266916,#266917,#266918,#266919, + #266920,#266921,#266922)); +#266914 = ORIENTED_EDGE('',*,*,#266659,.T.); +#266915 = ORIENTED_EDGE('',*,*,#266691,.T.); +#266916 = ORIENTED_EDGE('',*,*,#266722,.T.); +#266917 = ORIENTED_EDGE('',*,*,#266753,.T.); +#266918 = ORIENTED_EDGE('',*,*,#266785,.T.); +#266919 = ORIENTED_EDGE('',*,*,#266817,.T.); +#266920 = ORIENTED_EDGE('',*,*,#266848,.T.); +#266921 = ORIENTED_EDGE('',*,*,#266879,.T.); +#266922 = ORIENTED_EDGE('',*,*,#266901,.T.); +#266923 = PLANE('',#266924); +#266924 = AXIS2_PLACEMENT_3D('',#266925,#266926,#266927); +#266925 = CARTESIAN_POINT('',(0.,0.,1.51)); +#266926 = DIRECTION('',(0.,0.,1.)); +#266927 = DIRECTION('',(1.,0.,-0.)); +#266928 = ADVANCED_FACE('',(#266929),#266940,.T.); +#266929 = FACE_BOUND('',#266930,.F.); +#266930 = EDGE_LOOP('',(#266931,#266932,#266933,#266934,#266935,#266936, + #266937,#266938,#266939)); +#266931 = ORIENTED_EDGE('',*,*,#266642,.T.); +#266932 = ORIENTED_EDGE('',*,*,#266675,.T.); +#266933 = ORIENTED_EDGE('',*,*,#266706,.T.); +#266934 = ORIENTED_EDGE('',*,*,#266737,.T.); +#266935 = ORIENTED_EDGE('',*,*,#266768,.T.); +#266936 = ORIENTED_EDGE('',*,*,#266801,.T.); +#266937 = ORIENTED_EDGE('',*,*,#266832,.T.); +#266938 = ORIENTED_EDGE('',*,*,#266863,.T.); +#266939 = ORIENTED_EDGE('',*,*,#266894,.T.); +#266940 = PLANE('',#266941); +#266941 = AXIS2_PLACEMENT_3D('',#266942,#266943,#266944); +#266942 = CARTESIAN_POINT('',(0.,0.,1.545)); +#266943 = DIRECTION('',(0.,0.,1.)); +#266944 = DIRECTION('',(1.,0.,-0.)); +#266945 = MANIFOLD_SOLID_BREP('',#266946); +#266946 = CLOSED_SHELL('',(#266947,#266987,#267018,#267049,#267080, + #267111,#267142,#267175,#267206,#267237,#267268,#267299,#267332, + #267354,#267375)); +#266947 = ADVANCED_FACE('',(#266948),#266982,.T.); +#266948 = FACE_BOUND('',#266949,.T.); +#266949 = EDGE_LOOP('',(#266950,#266960,#266968,#266976)); +#266950 = ORIENTED_EDGE('',*,*,#266951,.T.); +#266951 = EDGE_CURVE('',#266952,#266954,#266956,.T.); +#266952 = VERTEX_POINT('',#266953); +#266953 = CARTESIAN_POINT('',(131.414443,-151.946852,1.51)); +#266954 = VERTEX_POINT('',#266955); +#266955 = CARTESIAN_POINT('',(131.414443,-151.946852,1.545)); +#266956 = LINE('',#266957,#266958); +#266957 = CARTESIAN_POINT('',(131.414443,-151.946852,1.51)); +#266958 = VECTOR('',#266959,1.); +#266959 = DIRECTION('',(0.,0.,1.)); +#266960 = ORIENTED_EDGE('',*,*,#266961,.T.); +#266961 = EDGE_CURVE('',#266954,#266962,#266964,.T.); +#266962 = VERTEX_POINT('',#266963); +#266963 = CARTESIAN_POINT('',(131.450491,-151.931921,1.545)); +#266964 = LINE('',#266965,#266966); +#266965 = CARTESIAN_POINT('',(131.414443,-151.946852,1.545)); +#266966 = VECTOR('',#266967,1.); +#266967 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#266968 = ORIENTED_EDGE('',*,*,#266969,.F.); +#266969 = EDGE_CURVE('',#266970,#266962,#266972,.T.); +#266970 = VERTEX_POINT('',#266971); +#266971 = CARTESIAN_POINT('',(131.450491,-151.931921,1.51)); +#266972 = LINE('',#266973,#266974); +#266973 = CARTESIAN_POINT('',(131.450491,-151.931921,1.51)); +#266974 = VECTOR('',#266975,1.); +#266975 = DIRECTION('',(0.,0.,1.)); +#266976 = ORIENTED_EDGE('',*,*,#266977,.F.); +#266977 = EDGE_CURVE('',#266952,#266970,#266978,.T.); +#266978 = LINE('',#266979,#266980); +#266979 = CARTESIAN_POINT('',(131.414443,-151.946852,1.51)); +#266980 = VECTOR('',#266981,1.); +#266981 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#266982 = PLANE('',#266983); +#266983 = AXIS2_PLACEMENT_3D('',#266984,#266985,#266986); +#266984 = CARTESIAN_POINT('',(131.414443,-151.946852,1.51)); +#266985 = DIRECTION('',(-0.382670952169,0.923884701879,0.)); +#266986 = DIRECTION('',(0.923884701879,0.382670952169,0.)); +#266987 = ADVANCED_FACE('',(#266988),#267013,.T.); +#266988 = FACE_BOUND('',#266989,.T.); +#266989 = EDGE_LOOP('',(#266990,#266991,#266999,#267007)); +#266990 = ORIENTED_EDGE('',*,*,#266969,.T.); +#266991 = ORIENTED_EDGE('',*,*,#266992,.T.); +#266992 = EDGE_CURVE('',#266962,#266993,#266995,.T.); +#266993 = VERTEX_POINT('',#266994); +#266994 = CARTESIAN_POINT('',(136.001919,-151.931921,1.545)); +#266995 = LINE('',#266996,#266997); +#266996 = CARTESIAN_POINT('',(131.450491,-151.931921,1.545)); +#266997 = VECTOR('',#266998,1.); +#266998 = DIRECTION('',(1.,0.,0.)); +#266999 = ORIENTED_EDGE('',*,*,#267000,.F.); +#267000 = EDGE_CURVE('',#267001,#266993,#267003,.T.); +#267001 = VERTEX_POINT('',#267002); +#267002 = CARTESIAN_POINT('',(136.001919,-151.931921,1.51)); +#267003 = LINE('',#267004,#267005); +#267004 = CARTESIAN_POINT('',(136.001919,-151.931921,1.51)); +#267005 = VECTOR('',#267006,1.); +#267006 = DIRECTION('',(0.,0.,1.)); +#267007 = ORIENTED_EDGE('',*,*,#267008,.F.); +#267008 = EDGE_CURVE('',#266970,#267001,#267009,.T.); +#267009 = LINE('',#267010,#267011); +#267010 = CARTESIAN_POINT('',(131.450491,-151.931921,1.51)); +#267011 = VECTOR('',#267012,1.); +#267012 = DIRECTION('',(1.,0.,0.)); +#267013 = PLANE('',#267014); +#267014 = AXIS2_PLACEMENT_3D('',#267015,#267016,#267017); +#267015 = CARTESIAN_POINT('',(131.450491,-151.931921,1.51)); +#267016 = DIRECTION('',(0.,1.,0.)); +#267017 = DIRECTION('',(1.,0.,0.)); +#267018 = ADVANCED_FACE('',(#267019),#267044,.T.); +#267019 = FACE_BOUND('',#267020,.T.); +#267020 = EDGE_LOOP('',(#267021,#267022,#267030,#267038)); +#267021 = ORIENTED_EDGE('',*,*,#267000,.T.); +#267022 = ORIENTED_EDGE('',*,*,#267023,.T.); +#267023 = EDGE_CURVE('',#266993,#267024,#267026,.T.); +#267024 = VERTEX_POINT('',#267025); +#267025 = CARTESIAN_POINT('',(136.037967,-151.946853,1.545)); +#267026 = LINE('',#267027,#267028); +#267027 = CARTESIAN_POINT('',(136.001919,-151.931921,1.545)); +#267028 = VECTOR('',#267029,1.); +#267029 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267030 = ORIENTED_EDGE('',*,*,#267031,.F.); +#267031 = EDGE_CURVE('',#267032,#267024,#267034,.T.); +#267032 = VERTEX_POINT('',#267033); +#267033 = CARTESIAN_POINT('',(136.037967,-151.946853,1.51)); +#267034 = LINE('',#267035,#267036); +#267035 = CARTESIAN_POINT('',(136.037967,-151.946853,1.51)); +#267036 = VECTOR('',#267037,1.); +#267037 = DIRECTION('',(0.,0.,1.)); +#267038 = ORIENTED_EDGE('',*,*,#267039,.F.); +#267039 = EDGE_CURVE('',#267001,#267032,#267040,.T.); +#267040 = LINE('',#267041,#267042); +#267041 = CARTESIAN_POINT('',(136.001919,-151.931921,1.51)); +#267042 = VECTOR('',#267043,1.); +#267043 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267044 = PLANE('',#267045); +#267045 = AXIS2_PLACEMENT_3D('',#267046,#267047,#267048); +#267046 = CARTESIAN_POINT('',(136.001919,-151.931921,1.51)); +#267047 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#267048 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267049 = ADVANCED_FACE('',(#267050),#267075,.T.); +#267050 = FACE_BOUND('',#267051,.T.); +#267051 = EDGE_LOOP('',(#267052,#267053,#267061,#267069)); +#267052 = ORIENTED_EDGE('',*,*,#267031,.T.); +#267053 = ORIENTED_EDGE('',*,*,#267054,.T.); +#267054 = EDGE_CURVE('',#267024,#267055,#267057,.T.); +#267055 = VERTEX_POINT('',#267056); +#267056 = CARTESIAN_POINT('',(136.333147,-152.242033,1.545)); +#267057 = LINE('',#267058,#267059); +#267058 = CARTESIAN_POINT('',(136.037967,-151.946853,1.545)); +#267059 = VECTOR('',#267060,1.); +#267060 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267061 = ORIENTED_EDGE('',*,*,#267062,.F.); +#267062 = EDGE_CURVE('',#267063,#267055,#267065,.T.); +#267063 = VERTEX_POINT('',#267064); +#267064 = CARTESIAN_POINT('',(136.333147,-152.242033,1.51)); +#267065 = LINE('',#267066,#267067); +#267066 = CARTESIAN_POINT('',(136.333147,-152.242033,1.51)); +#267067 = VECTOR('',#267068,1.); +#267068 = DIRECTION('',(0.,0.,1.)); +#267069 = ORIENTED_EDGE('',*,*,#267070,.F.); +#267070 = EDGE_CURVE('',#267032,#267063,#267071,.T.); +#267071 = LINE('',#267072,#267073); +#267072 = CARTESIAN_POINT('',(136.037967,-151.946853,1.51)); +#267073 = VECTOR('',#267074,1.); +#267074 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267075 = PLANE('',#267076); +#267076 = AXIS2_PLACEMENT_3D('',#267077,#267078,#267079); +#267077 = CARTESIAN_POINT('',(136.037967,-151.946853,1.51)); +#267078 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#267079 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267080 = ADVANCED_FACE('',(#267081),#267106,.T.); +#267081 = FACE_BOUND('',#267082,.T.); +#267082 = EDGE_LOOP('',(#267083,#267084,#267092,#267100)); +#267083 = ORIENTED_EDGE('',*,*,#267062,.T.); +#267084 = ORIENTED_EDGE('',*,*,#267085,.T.); +#267085 = EDGE_CURVE('',#267055,#267086,#267088,.T.); +#267086 = VERTEX_POINT('',#267087); +#267087 = CARTESIAN_POINT('',(136.348079,-152.278081,1.545)); +#267088 = LINE('',#267089,#267090); +#267089 = CARTESIAN_POINT('',(136.333147,-152.242033,1.545)); +#267090 = VECTOR('',#267091,1.); +#267091 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#267092 = ORIENTED_EDGE('',*,*,#267093,.F.); +#267093 = EDGE_CURVE('',#267094,#267086,#267096,.T.); +#267094 = VERTEX_POINT('',#267095); +#267095 = CARTESIAN_POINT('',(136.348079,-152.278081,1.51)); +#267096 = LINE('',#267097,#267098); +#267097 = CARTESIAN_POINT('',(136.348079,-152.278081,1.51)); +#267098 = VECTOR('',#267099,1.); +#267099 = DIRECTION('',(0.,0.,1.)); +#267100 = ORIENTED_EDGE('',*,*,#267101,.F.); +#267101 = EDGE_CURVE('',#267063,#267094,#267102,.T.); +#267102 = LINE('',#267103,#267104); +#267103 = CARTESIAN_POINT('',(136.333147,-152.242033,1.51)); +#267104 = VECTOR('',#267105,1.); +#267105 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#267106 = PLANE('',#267107); +#267107 = AXIS2_PLACEMENT_3D('',#267108,#267109,#267110); +#267108 = CARTESIAN_POINT('',(136.333147,-152.242033,1.51)); +#267109 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#267110 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#267111 = ADVANCED_FACE('',(#267112),#267137,.T.); +#267112 = FACE_BOUND('',#267113,.T.); +#267113 = EDGE_LOOP('',(#267114,#267115,#267123,#267131)); +#267114 = ORIENTED_EDGE('',*,*,#267093,.T.); +#267115 = ORIENTED_EDGE('',*,*,#267116,.T.); +#267116 = EDGE_CURVE('',#267086,#267117,#267119,.T.); +#267117 = VERTEX_POINT('',#267118); +#267118 = CARTESIAN_POINT('',(136.348079,-153.074509,1.545)); +#267119 = LINE('',#267120,#267121); +#267120 = CARTESIAN_POINT('',(136.348079,-152.278081,1.545)); +#267121 = VECTOR('',#267122,1.); +#267122 = DIRECTION('',(0.,-1.,0.)); +#267123 = ORIENTED_EDGE('',*,*,#267124,.F.); +#267124 = EDGE_CURVE('',#267125,#267117,#267127,.T.); +#267125 = VERTEX_POINT('',#267126); +#267126 = CARTESIAN_POINT('',(136.348079,-153.074509,1.51)); +#267127 = LINE('',#267128,#267129); +#267128 = CARTESIAN_POINT('',(136.348079,-153.074509,1.51)); +#267129 = VECTOR('',#267130,1.); +#267130 = DIRECTION('',(0.,0.,1.)); +#267131 = ORIENTED_EDGE('',*,*,#267132,.F.); +#267132 = EDGE_CURVE('',#267094,#267125,#267133,.T.); +#267133 = LINE('',#267134,#267135); +#267134 = CARTESIAN_POINT('',(136.348079,-152.278081,1.51)); +#267135 = VECTOR('',#267136,1.); +#267136 = DIRECTION('',(0.,-1.,0.)); +#267137 = PLANE('',#267138); +#267138 = AXIS2_PLACEMENT_3D('',#267139,#267140,#267141); +#267139 = CARTESIAN_POINT('',(136.348079,-152.278081,1.51)); +#267140 = DIRECTION('',(1.,0.,-0.)); +#267141 = DIRECTION('',(0.,-1.,0.)); +#267142 = ADVANCED_FACE('',(#267143),#267170,.T.); +#267143 = FACE_BOUND('',#267144,.T.); +#267144 = EDGE_LOOP('',(#267145,#267146,#267155,#267163)); +#267145 = ORIENTED_EDGE('',*,*,#267124,.T.); +#267146 = ORIENTED_EDGE('',*,*,#267147,.T.); +#267147 = EDGE_CURVE('',#267117,#267148,#267150,.T.); +#267148 = VERTEX_POINT('',#267149); +#267149 = CARTESIAN_POINT('',(136.151921,-153.074509,1.545)); +#267150 = CIRCLE('',#267151,0.100000456609); +#267151 = AXIS2_PLACEMENT_3D('',#267152,#267153,#267154); +#267152 = CARTESIAN_POINT('',(136.25,-153.055,1.545)); +#267153 = DIRECTION('',(-0.,0.,-1.)); +#267154 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267155 = ORIENTED_EDGE('',*,*,#267156,.F.); +#267156 = EDGE_CURVE('',#267157,#267148,#267159,.T.); +#267157 = VERTEX_POINT('',#267158); +#267158 = CARTESIAN_POINT('',(136.151921,-153.074509,1.51)); +#267159 = LINE('',#267160,#267161); +#267160 = CARTESIAN_POINT('',(136.151921,-153.074509,1.51)); +#267161 = VECTOR('',#267162,1.); +#267162 = DIRECTION('',(0.,0.,1.)); +#267163 = ORIENTED_EDGE('',*,*,#267164,.F.); +#267164 = EDGE_CURVE('',#267125,#267157,#267165,.T.); +#267165 = CIRCLE('',#267166,0.100000456609); +#267166 = AXIS2_PLACEMENT_3D('',#267167,#267168,#267169); +#267167 = CARTESIAN_POINT('',(136.25,-153.055,1.51)); +#267168 = DIRECTION('',(-0.,0.,-1.)); +#267169 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267170 = CYLINDRICAL_SURFACE('',#267171,0.100000456609); +#267171 = AXIS2_PLACEMENT_3D('',#267172,#267173,#267174); +#267172 = CARTESIAN_POINT('',(136.25,-153.055,1.51)); +#267173 = DIRECTION('',(-0.,0.,-1.)); +#267174 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267175 = ADVANCED_FACE('',(#267176),#267201,.T.); +#267176 = FACE_BOUND('',#267177,.T.); +#267177 = EDGE_LOOP('',(#267178,#267179,#267187,#267195)); +#267178 = ORIENTED_EDGE('',*,*,#267156,.T.); +#267179 = ORIENTED_EDGE('',*,*,#267180,.T.); +#267180 = EDGE_CURVE('',#267148,#267181,#267183,.T.); +#267181 = VERTEX_POINT('',#267182); +#267182 = CARTESIAN_POINT('',(136.15,-152.339011,1.545)); +#267183 = LINE('',#267184,#267185); +#267184 = CARTESIAN_POINT('',(136.151921,-153.074509,1.545)); +#267185 = VECTOR('',#267186,1.); +#267186 = DIRECTION('',(-2.611826881631E-03,0.999996589174,0.)); +#267187 = ORIENTED_EDGE('',*,*,#267188,.F.); +#267188 = EDGE_CURVE('',#267189,#267181,#267191,.T.); +#267189 = VERTEX_POINT('',#267190); +#267190 = CARTESIAN_POINT('',(136.15,-152.339011,1.51)); +#267191 = LINE('',#267192,#267193); +#267192 = CARTESIAN_POINT('',(136.15,-152.339011,1.51)); +#267193 = VECTOR('',#267194,1.); +#267194 = DIRECTION('',(0.,0.,1.)); +#267195 = ORIENTED_EDGE('',*,*,#267196,.F.); +#267196 = EDGE_CURVE('',#267157,#267189,#267197,.T.); +#267197 = LINE('',#267198,#267199); +#267198 = CARTESIAN_POINT('',(136.151921,-153.074509,1.51)); +#267199 = VECTOR('',#267200,1.); +#267200 = DIRECTION('',(-2.611826881631E-03,0.999996589174,0.)); +#267201 = PLANE('',#267202); +#267202 = AXIS2_PLACEMENT_3D('',#267203,#267204,#267205); +#267203 = CARTESIAN_POINT('',(136.151921,-153.074509,1.51)); +#267204 = DIRECTION('',(-0.999996589174,-2.611826881631E-03,0.)); +#267205 = DIRECTION('',(-2.611826881631E-03,0.999996589174,0.)); +#267206 = ADVANCED_FACE('',(#267207),#267232,.T.); +#267207 = FACE_BOUND('',#267208,.T.); +#267208 = EDGE_LOOP('',(#267209,#267210,#267218,#267226)); +#267209 = ORIENTED_EDGE('',*,*,#267188,.T.); +#267210 = ORIENTED_EDGE('',*,*,#267211,.T.); +#267211 = EDGE_CURVE('',#267181,#267212,#267214,.T.); +#267212 = VERTEX_POINT('',#267213); +#267213 = CARTESIAN_POINT('',(135.940988,-152.13,1.545)); +#267214 = LINE('',#267215,#267216); +#267215 = CARTESIAN_POINT('',(136.15,-152.339011,1.545)); +#267216 = VECTOR('',#267217,1.); +#267217 = DIRECTION('',(-0.707108472734,0.707105089635,0.)); +#267218 = ORIENTED_EDGE('',*,*,#267219,.F.); +#267219 = EDGE_CURVE('',#267220,#267212,#267222,.T.); +#267220 = VERTEX_POINT('',#267221); +#267221 = CARTESIAN_POINT('',(135.940988,-152.13,1.51)); +#267222 = LINE('',#267223,#267224); +#267223 = CARTESIAN_POINT('',(135.940988,-152.13,1.51)); +#267224 = VECTOR('',#267225,1.); +#267225 = DIRECTION('',(0.,0.,1.)); +#267226 = ORIENTED_EDGE('',*,*,#267227,.F.); +#267227 = EDGE_CURVE('',#267189,#267220,#267228,.T.); +#267228 = LINE('',#267229,#267230); +#267229 = CARTESIAN_POINT('',(136.15,-152.339011,1.51)); +#267230 = VECTOR('',#267231,1.); +#267231 = DIRECTION('',(-0.707108472734,0.707105089635,0.)); +#267232 = PLANE('',#267233); +#267233 = AXIS2_PLACEMENT_3D('',#267234,#267235,#267236); +#267234 = CARTESIAN_POINT('',(136.15,-152.339011,1.51)); +#267235 = DIRECTION('',(-0.707105089635,-0.707108472734,0.)); +#267236 = DIRECTION('',(-0.707108472734,0.707105089635,0.)); +#267237 = ADVANCED_FACE('',(#267238),#267263,.T.); +#267238 = FACE_BOUND('',#267239,.T.); +#267239 = EDGE_LOOP('',(#267240,#267241,#267249,#267257)); +#267240 = ORIENTED_EDGE('',*,*,#267219,.T.); +#267241 = ORIENTED_EDGE('',*,*,#267242,.T.); +#267242 = EDGE_CURVE('',#267212,#267243,#267245,.T.); +#267243 = VERTEX_POINT('',#267244); +#267244 = CARTESIAN_POINT('',(131.511421,-152.13,1.545)); +#267245 = LINE('',#267246,#267247); +#267246 = CARTESIAN_POINT('',(135.940988,-152.13,1.545)); +#267247 = VECTOR('',#267248,1.); +#267248 = DIRECTION('',(-1.,0.,0.)); +#267249 = ORIENTED_EDGE('',*,*,#267250,.F.); +#267250 = EDGE_CURVE('',#267251,#267243,#267253,.T.); +#267251 = VERTEX_POINT('',#267252); +#267252 = CARTESIAN_POINT('',(131.511421,-152.13,1.51)); +#267253 = LINE('',#267254,#267255); +#267254 = CARTESIAN_POINT('',(131.511421,-152.13,1.51)); +#267255 = VECTOR('',#267256,1.); +#267256 = DIRECTION('',(0.,0.,1.)); +#267257 = ORIENTED_EDGE('',*,*,#267258,.F.); +#267258 = EDGE_CURVE('',#267220,#267251,#267259,.T.); +#267259 = LINE('',#267260,#267261); +#267260 = CARTESIAN_POINT('',(135.940988,-152.13,1.51)); +#267261 = VECTOR('',#267262,1.); +#267262 = DIRECTION('',(-1.,0.,0.)); +#267263 = PLANE('',#267264); +#267264 = AXIS2_PLACEMENT_3D('',#267265,#267266,#267267); +#267265 = CARTESIAN_POINT('',(135.940988,-152.13,1.51)); +#267266 = DIRECTION('',(0.,-1.,0.)); +#267267 = DIRECTION('',(-1.,0.,0.)); +#267268 = ADVANCED_FACE('',(#267269),#267294,.T.); +#267269 = FACE_BOUND('',#267270,.T.); +#267270 = EDGE_LOOP('',(#267271,#267272,#267280,#267288)); +#267271 = ORIENTED_EDGE('',*,*,#267250,.T.); +#267272 = ORIENTED_EDGE('',*,*,#267273,.T.); +#267273 = EDGE_CURVE('',#267243,#267274,#267276,.T.); +#267274 = VERTEX_POINT('',#267275); +#267275 = CARTESIAN_POINT('',(130.305557,-153.333147,1.545)); +#267276 = LINE('',#267277,#267278); +#267277 = CARTESIAN_POINT('',(131.511421,-152.13,1.545)); +#267278 = VECTOR('',#267279,1.); +#267279 = DIRECTION('',(-0.707903840431,-0.706308822473,0.)); +#267280 = ORIENTED_EDGE('',*,*,#267281,.F.); +#267281 = EDGE_CURVE('',#267282,#267274,#267284,.T.); +#267282 = VERTEX_POINT('',#267283); +#267283 = CARTESIAN_POINT('',(130.305557,-153.333147,1.51)); +#267284 = LINE('',#267285,#267286); +#267285 = CARTESIAN_POINT('',(130.305557,-153.333147,1.51)); +#267286 = VECTOR('',#267287,1.); +#267287 = DIRECTION('',(0.,0.,1.)); +#267288 = ORIENTED_EDGE('',*,*,#267289,.F.); +#267289 = EDGE_CURVE('',#267251,#267282,#267290,.T.); +#267290 = LINE('',#267291,#267292); +#267291 = CARTESIAN_POINT('',(131.511421,-152.13,1.51)); +#267292 = VECTOR('',#267293,1.); +#267293 = DIRECTION('',(-0.707903840431,-0.706308822473,0.)); +#267294 = PLANE('',#267295); +#267295 = AXIS2_PLACEMENT_3D('',#267296,#267297,#267298); +#267296 = CARTESIAN_POINT('',(131.511421,-152.13,1.51)); +#267297 = DIRECTION('',(0.706308822473,-0.707903840431,0.)); +#267298 = DIRECTION('',(-0.707903840431,-0.706308822473,0.)); +#267299 = ADVANCED_FACE('',(#267300),#267327,.T.); +#267300 = FACE_BOUND('',#267301,.T.); +#267301 = EDGE_LOOP('',(#267302,#267303,#267312,#267320)); +#267302 = ORIENTED_EDGE('',*,*,#267281,.T.); +#267303 = ORIENTED_EDGE('',*,*,#267304,.T.); +#267304 = EDGE_CURVE('',#267274,#267305,#267307,.T.); +#267305 = VERTEX_POINT('',#267306); +#267306 = CARTESIAN_POINT('',(130.166853,-153.194443,1.545)); +#267307 = CIRCLE('',#267308,0.10000001929); +#267308 = AXIS2_PLACEMENT_3D('',#267309,#267310,#267311); +#267309 = CARTESIAN_POINT('',(130.25,-153.25,1.545)); +#267310 = DIRECTION('',(0.,0.,-1.)); +#267311 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#267312 = ORIENTED_EDGE('',*,*,#267313,.F.); +#267313 = EDGE_CURVE('',#267314,#267305,#267316,.T.); +#267314 = VERTEX_POINT('',#267315); +#267315 = CARTESIAN_POINT('',(130.166853,-153.194443,1.51)); +#267316 = LINE('',#267317,#267318); +#267317 = CARTESIAN_POINT('',(130.166853,-153.194443,1.51)); +#267318 = VECTOR('',#267319,1.); +#267319 = DIRECTION('',(0.,0.,1.)); +#267320 = ORIENTED_EDGE('',*,*,#267321,.F.); +#267321 = EDGE_CURVE('',#267282,#267314,#267322,.T.); +#267322 = CIRCLE('',#267323,0.10000001929); +#267323 = AXIS2_PLACEMENT_3D('',#267324,#267325,#267326); +#267324 = CARTESIAN_POINT('',(130.25,-153.25,1.51)); +#267325 = DIRECTION('',(0.,0.,-1.)); +#267326 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#267327 = CYLINDRICAL_SURFACE('',#267328,0.10000001929); +#267328 = AXIS2_PLACEMENT_3D('',#267329,#267330,#267331); +#267329 = CARTESIAN_POINT('',(130.25,-153.25,1.51)); +#267330 = DIRECTION('',(0.,0.,-1.)); +#267331 = DIRECTION('',(0.555569892831,-0.831469839609,0.)); +#267332 = ADVANCED_FACE('',(#267333),#267349,.T.); +#267333 = FACE_BOUND('',#267334,.T.); +#267334 = EDGE_LOOP('',(#267335,#267336,#267342,#267343)); +#267335 = ORIENTED_EDGE('',*,*,#267313,.T.); +#267336 = ORIENTED_EDGE('',*,*,#267337,.T.); +#267337 = EDGE_CURVE('',#267305,#266954,#267338,.T.); +#267338 = LINE('',#267339,#267340); +#267339 = CARTESIAN_POINT('',(130.166853,-153.194443,1.545)); +#267340 = VECTOR('',#267341,1.); +#267341 = DIRECTION('',(0.707106497798,0.707107064575,0.)); +#267342 = ORIENTED_EDGE('',*,*,#266951,.F.); +#267343 = ORIENTED_EDGE('',*,*,#267344,.F.); +#267344 = EDGE_CURVE('',#267314,#266952,#267345,.T.); +#267345 = LINE('',#267346,#267347); +#267346 = CARTESIAN_POINT('',(130.166853,-153.194443,1.51)); +#267347 = VECTOR('',#267348,1.); +#267348 = DIRECTION('',(0.707106497798,0.707107064575,0.)); +#267349 = PLANE('',#267350); +#267350 = AXIS2_PLACEMENT_3D('',#267351,#267352,#267353); +#267351 = CARTESIAN_POINT('',(130.166853,-153.194443,1.51)); +#267352 = DIRECTION('',(-0.707107064575,0.707106497798,0.)); +#267353 = DIRECTION('',(0.707106497798,0.707107064575,0.)); +#267354 = ADVANCED_FACE('',(#267355),#267370,.F.); +#267355 = FACE_BOUND('',#267356,.T.); +#267356 = EDGE_LOOP('',(#267357,#267358,#267359,#267360,#267361,#267362, + #267363,#267364,#267365,#267366,#267367,#267368,#267369)); +#267357 = ORIENTED_EDGE('',*,*,#266977,.T.); +#267358 = ORIENTED_EDGE('',*,*,#267008,.T.); +#267359 = ORIENTED_EDGE('',*,*,#267039,.T.); +#267360 = ORIENTED_EDGE('',*,*,#267070,.T.); +#267361 = ORIENTED_EDGE('',*,*,#267101,.T.); +#267362 = ORIENTED_EDGE('',*,*,#267132,.T.); +#267363 = ORIENTED_EDGE('',*,*,#267164,.T.); +#267364 = ORIENTED_EDGE('',*,*,#267196,.T.); +#267365 = ORIENTED_EDGE('',*,*,#267227,.T.); +#267366 = ORIENTED_EDGE('',*,*,#267258,.T.); +#267367 = ORIENTED_EDGE('',*,*,#267289,.T.); +#267368 = ORIENTED_EDGE('',*,*,#267321,.T.); +#267369 = ORIENTED_EDGE('',*,*,#267344,.T.); +#267370 = PLANE('',#267371); +#267371 = AXIS2_PLACEMENT_3D('',#267372,#267373,#267374); +#267372 = CARTESIAN_POINT('',(0.,0.,1.51)); +#267373 = DIRECTION('',(0.,0.,1.)); +#267374 = DIRECTION('',(1.,0.,-0.)); +#267375 = ADVANCED_FACE('',(#267376),#267391,.T.); +#267376 = FACE_BOUND('',#267377,.F.); +#267377 = EDGE_LOOP('',(#267378,#267379,#267380,#267381,#267382,#267383, + #267384,#267385,#267386,#267387,#267388,#267389,#267390)); +#267378 = ORIENTED_EDGE('',*,*,#266961,.T.); +#267379 = ORIENTED_EDGE('',*,*,#266992,.T.); +#267380 = ORIENTED_EDGE('',*,*,#267023,.T.); +#267381 = ORIENTED_EDGE('',*,*,#267054,.T.); +#267382 = ORIENTED_EDGE('',*,*,#267085,.T.); +#267383 = ORIENTED_EDGE('',*,*,#267116,.T.); +#267384 = ORIENTED_EDGE('',*,*,#267147,.T.); +#267385 = ORIENTED_EDGE('',*,*,#267180,.T.); +#267386 = ORIENTED_EDGE('',*,*,#267211,.T.); +#267387 = ORIENTED_EDGE('',*,*,#267242,.T.); +#267388 = ORIENTED_EDGE('',*,*,#267273,.T.); +#267389 = ORIENTED_EDGE('',*,*,#267304,.T.); +#267390 = ORIENTED_EDGE('',*,*,#267337,.T.); +#267391 = PLANE('',#267392); +#267392 = AXIS2_PLACEMENT_3D('',#267393,#267394,#267395); +#267393 = CARTESIAN_POINT('',(0.,0.,1.545)); +#267394 = DIRECTION('',(0.,0.,1.)); +#267395 = DIRECTION('',(1.,0.,-0.)); +#267396 = MANIFOLD_SOLID_BREP('',#267397); +#267397 = CLOSED_SHELL('',(#267398,#267438,#267469,#267500,#267531, + #267562,#267593,#267626,#267657,#267688,#267719,#267750,#267781, + #267814,#267845,#267876,#267898,#267922)); +#267398 = ADVANCED_FACE('',(#267399),#267433,.T.); +#267399 = FACE_BOUND('',#267400,.T.); +#267400 = EDGE_LOOP('',(#267401,#267411,#267419,#267427)); +#267401 = ORIENTED_EDGE('',*,*,#267402,.T.); +#267402 = EDGE_CURVE('',#267403,#267405,#267407,.T.); +#267403 = VERTEX_POINT('',#267404); +#267404 = CARTESIAN_POINT('',(139.444442,-151.416853,1.51)); +#267405 = VERTEX_POINT('',#267406); +#267406 = CARTESIAN_POINT('',(139.444442,-151.416853,1.545)); +#267407 = LINE('',#267408,#267409); +#267408 = CARTESIAN_POINT('',(139.444442,-151.416853,1.51)); +#267409 = VECTOR('',#267410,1.); +#267410 = DIRECTION('',(0.,0.,1.)); +#267411 = ORIENTED_EDGE('',*,*,#267412,.T.); +#267412 = EDGE_CURVE('',#267405,#267413,#267415,.T.); +#267413 = VERTEX_POINT('',#267414); +#267414 = CARTESIAN_POINT('',(139.480491,-151.401921,1.545)); +#267415 = LINE('',#267416,#267417); +#267416 = CARTESIAN_POINT('',(139.444442,-151.416853,1.545)); +#267417 = VECTOR('',#267418,1.); +#267418 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#267419 = ORIENTED_EDGE('',*,*,#267420,.F.); +#267420 = EDGE_CURVE('',#267421,#267413,#267423,.T.); +#267421 = VERTEX_POINT('',#267422); +#267422 = CARTESIAN_POINT('',(139.480491,-151.401921,1.51)); +#267423 = LINE('',#267424,#267425); +#267424 = CARTESIAN_POINT('',(139.480491,-151.401921,1.51)); +#267425 = VECTOR('',#267426,1.); +#267426 = DIRECTION('',(0.,0.,1.)); +#267427 = ORIENTED_EDGE('',*,*,#267428,.F.); +#267428 = EDGE_CURVE('',#267403,#267421,#267429,.T.); +#267429 = LINE('',#267430,#267431); +#267430 = CARTESIAN_POINT('',(139.444442,-151.416853,1.51)); +#267431 = VECTOR('',#267432,1.); +#267432 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#267433 = PLANE('',#267434); +#267434 = AXIS2_PLACEMENT_3D('',#267435,#267436,#267437); +#267435 = CARTESIAN_POINT('',(139.444442,-151.416853,1.51)); +#267436 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#267437 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#267438 = ADVANCED_FACE('',(#267439),#267464,.T.); +#267439 = FACE_BOUND('',#267440,.T.); +#267440 = EDGE_LOOP('',(#267441,#267442,#267450,#267458)); +#267441 = ORIENTED_EDGE('',*,*,#267420,.T.); +#267442 = ORIENTED_EDGE('',*,*,#267443,.T.); +#267443 = EDGE_CURVE('',#267413,#267444,#267446,.T.); +#267444 = VERTEX_POINT('',#267445); +#267445 = CARTESIAN_POINT('',(142.769509,-151.401921,1.545)); +#267446 = LINE('',#267447,#267448); +#267447 = CARTESIAN_POINT('',(139.480491,-151.401921,1.545)); +#267448 = VECTOR('',#267449,1.); +#267449 = DIRECTION('',(1.,0.,0.)); +#267450 = ORIENTED_EDGE('',*,*,#267451,.F.); +#267451 = EDGE_CURVE('',#267452,#267444,#267454,.T.); +#267452 = VERTEX_POINT('',#267453); +#267453 = CARTESIAN_POINT('',(142.769509,-151.401921,1.51)); +#267454 = LINE('',#267455,#267456); +#267455 = CARTESIAN_POINT('',(142.769509,-151.401921,1.51)); +#267456 = VECTOR('',#267457,1.); +#267457 = DIRECTION('',(0.,0.,1.)); +#267458 = ORIENTED_EDGE('',*,*,#267459,.F.); +#267459 = EDGE_CURVE('',#267421,#267452,#267460,.T.); +#267460 = LINE('',#267461,#267462); +#267461 = CARTESIAN_POINT('',(139.480491,-151.401921,1.51)); +#267462 = VECTOR('',#267463,1.); +#267463 = DIRECTION('',(1.,0.,0.)); +#267464 = PLANE('',#267465); +#267465 = AXIS2_PLACEMENT_3D('',#267466,#267467,#267468); +#267466 = CARTESIAN_POINT('',(139.480491,-151.401921,1.51)); +#267467 = DIRECTION('',(0.,1.,0.)); +#267468 = DIRECTION('',(1.,0.,0.)); +#267469 = ADVANCED_FACE('',(#267470),#267495,.T.); +#267470 = FACE_BOUND('',#267471,.T.); +#267471 = EDGE_LOOP('',(#267472,#267473,#267481,#267489)); +#267472 = ORIENTED_EDGE('',*,*,#267451,.T.); +#267473 = ORIENTED_EDGE('',*,*,#267474,.T.); +#267474 = EDGE_CURVE('',#267444,#267475,#267477,.T.); +#267475 = VERTEX_POINT('',#267476); +#267476 = CARTESIAN_POINT('',(142.805557,-151.416853,1.545)); +#267477 = LINE('',#267478,#267479); +#267478 = CARTESIAN_POINT('',(142.769509,-151.401921,1.545)); +#267479 = VECTOR('',#267480,1.); +#267480 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267481 = ORIENTED_EDGE('',*,*,#267482,.F.); +#267482 = EDGE_CURVE('',#267483,#267475,#267485,.T.); +#267483 = VERTEX_POINT('',#267484); +#267484 = CARTESIAN_POINT('',(142.805557,-151.416853,1.51)); +#267485 = LINE('',#267486,#267487); +#267486 = CARTESIAN_POINT('',(142.805557,-151.416853,1.51)); +#267487 = VECTOR('',#267488,1.); +#267488 = DIRECTION('',(0.,0.,1.)); +#267489 = ORIENTED_EDGE('',*,*,#267490,.F.); +#267490 = EDGE_CURVE('',#267452,#267483,#267491,.T.); +#267491 = LINE('',#267492,#267493); +#267492 = CARTESIAN_POINT('',(142.769509,-151.401921,1.51)); +#267493 = VECTOR('',#267494,1.); +#267494 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267495 = PLANE('',#267496); +#267496 = AXIS2_PLACEMENT_3D('',#267497,#267498,#267499); +#267497 = CARTESIAN_POINT('',(142.769509,-151.401921,1.51)); +#267498 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#267499 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#267500 = ADVANCED_FACE('',(#267501),#267526,.T.); +#267501 = FACE_BOUND('',#267502,.T.); +#267502 = EDGE_LOOP('',(#267503,#267504,#267512,#267520)); +#267503 = ORIENTED_EDGE('',*,*,#267482,.T.); +#267504 = ORIENTED_EDGE('',*,*,#267505,.T.); +#267505 = EDGE_CURVE('',#267475,#267506,#267508,.T.); +#267506 = VERTEX_POINT('',#267507); +#267507 = CARTESIAN_POINT('',(143.823147,-152.434443,1.545)); +#267508 = LINE('',#267509,#267510); +#267509 = CARTESIAN_POINT('',(142.805557,-151.416853,1.545)); +#267510 = VECTOR('',#267511,1.); +#267511 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267512 = ORIENTED_EDGE('',*,*,#267513,.F.); +#267513 = EDGE_CURVE('',#267514,#267506,#267516,.T.); +#267514 = VERTEX_POINT('',#267515); +#267515 = CARTESIAN_POINT('',(143.823147,-152.434443,1.51)); +#267516 = LINE('',#267517,#267518); +#267517 = CARTESIAN_POINT('',(143.823147,-152.434443,1.51)); +#267518 = VECTOR('',#267519,1.); +#267519 = DIRECTION('',(0.,0.,1.)); +#267520 = ORIENTED_EDGE('',*,*,#267521,.F.); +#267521 = EDGE_CURVE('',#267483,#267514,#267522,.T.); +#267522 = LINE('',#267523,#267524); +#267523 = CARTESIAN_POINT('',(142.805557,-151.416853,1.51)); +#267524 = VECTOR('',#267525,1.); +#267525 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267526 = PLANE('',#267527); +#267527 = AXIS2_PLACEMENT_3D('',#267528,#267529,#267530); +#267528 = CARTESIAN_POINT('',(142.805557,-151.416853,1.51)); +#267529 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#267530 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267531 = ADVANCED_FACE('',(#267532),#267557,.T.); +#267532 = FACE_BOUND('',#267533,.T.); +#267533 = EDGE_LOOP('',(#267534,#267535,#267543,#267551)); +#267534 = ORIENTED_EDGE('',*,*,#267513,.T.); +#267535 = ORIENTED_EDGE('',*,*,#267536,.T.); +#267536 = EDGE_CURVE('',#267506,#267537,#267539,.T.); +#267537 = VERTEX_POINT('',#267538); +#267538 = CARTESIAN_POINT('',(143.838079,-152.470491,1.545)); +#267539 = LINE('',#267540,#267541); +#267540 = CARTESIAN_POINT('',(143.823147,-152.434443,1.545)); +#267541 = VECTOR('',#267542,1.); +#267542 = DIRECTION('',(0.382692828059,-0.923875640631,0.)); +#267543 = ORIENTED_EDGE('',*,*,#267544,.F.); +#267544 = EDGE_CURVE('',#267545,#267537,#267547,.T.); +#267545 = VERTEX_POINT('',#267546); +#267546 = CARTESIAN_POINT('',(143.838079,-152.470491,1.51)); +#267547 = LINE('',#267548,#267549); +#267548 = CARTESIAN_POINT('',(143.838079,-152.470491,1.51)); +#267549 = VECTOR('',#267550,1.); +#267550 = DIRECTION('',(0.,0.,1.)); +#267551 = ORIENTED_EDGE('',*,*,#267552,.F.); +#267552 = EDGE_CURVE('',#267514,#267545,#267553,.T.); +#267553 = LINE('',#267554,#267555); +#267554 = CARTESIAN_POINT('',(143.823147,-152.434443,1.51)); +#267555 = VECTOR('',#267556,1.); +#267556 = DIRECTION('',(0.382692828059,-0.923875640631,0.)); +#267557 = PLANE('',#267558); +#267558 = AXIS2_PLACEMENT_3D('',#267559,#267560,#267561); +#267559 = CARTESIAN_POINT('',(143.823147,-152.434443,1.51)); +#267560 = DIRECTION('',(0.923875640631,0.382692828059,-0.)); +#267561 = DIRECTION('',(0.382692828059,-0.923875640631,0.)); +#267562 = ADVANCED_FACE('',(#267563),#267588,.T.); +#267563 = FACE_BOUND('',#267564,.T.); +#267564 = EDGE_LOOP('',(#267565,#267566,#267574,#267582)); +#267565 = ORIENTED_EDGE('',*,*,#267544,.T.); +#267566 = ORIENTED_EDGE('',*,*,#267567,.T.); +#267567 = EDGE_CURVE('',#267537,#267568,#267570,.T.); +#267568 = VERTEX_POINT('',#267569); +#267569 = CARTESIAN_POINT('',(143.838079,-152.769509,1.545)); +#267570 = LINE('',#267571,#267572); +#267571 = CARTESIAN_POINT('',(143.838079,-152.470491,1.545)); +#267572 = VECTOR('',#267573,1.); +#267573 = DIRECTION('',(0.,-1.,0.)); +#267574 = ORIENTED_EDGE('',*,*,#267575,.F.); +#267575 = EDGE_CURVE('',#267576,#267568,#267578,.T.); +#267576 = VERTEX_POINT('',#267577); +#267577 = CARTESIAN_POINT('',(143.838079,-152.769509,1.51)); +#267578 = LINE('',#267579,#267580); +#267579 = CARTESIAN_POINT('',(143.838079,-152.769509,1.51)); +#267580 = VECTOR('',#267581,1.); +#267581 = DIRECTION('',(0.,0.,1.)); +#267582 = ORIENTED_EDGE('',*,*,#267583,.F.); +#267583 = EDGE_CURVE('',#267545,#267576,#267584,.T.); +#267584 = LINE('',#267585,#267586); +#267585 = CARTESIAN_POINT('',(143.838079,-152.470491,1.51)); +#267586 = VECTOR('',#267587,1.); +#267587 = DIRECTION('',(0.,-1.,0.)); +#267588 = PLANE('',#267589); +#267589 = AXIS2_PLACEMENT_3D('',#267590,#267591,#267592); +#267590 = CARTESIAN_POINT('',(143.838079,-152.470491,1.51)); +#267591 = DIRECTION('',(1.,0.,-0.)); +#267592 = DIRECTION('',(0.,-1.,0.)); +#267593 = ADVANCED_FACE('',(#267594),#267621,.T.); +#267594 = FACE_BOUND('',#267595,.T.); +#267595 = EDGE_LOOP('',(#267596,#267597,#267606,#267614)); +#267596 = ORIENTED_EDGE('',*,*,#267575,.T.); +#267597 = ORIENTED_EDGE('',*,*,#267598,.T.); +#267598 = EDGE_CURVE('',#267568,#267599,#267601,.T.); +#267599 = VERTEX_POINT('',#267600); +#267600 = CARTESIAN_POINT('',(143.641921,-152.769509,1.545)); +#267601 = CIRCLE('',#267602,0.100000456609); +#267602 = AXIS2_PLACEMENT_3D('',#267603,#267604,#267605); +#267603 = CARTESIAN_POINT('',(143.74,-152.75,1.545)); +#267604 = DIRECTION('',(-0.,0.,-1.)); +#267605 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#267606 = ORIENTED_EDGE('',*,*,#267607,.F.); +#267607 = EDGE_CURVE('',#267608,#267599,#267610,.T.); +#267608 = VERTEX_POINT('',#267609); +#267609 = CARTESIAN_POINT('',(143.641921,-152.769509,1.51)); +#267610 = LINE('',#267611,#267612); +#267611 = CARTESIAN_POINT('',(143.641921,-152.769509,1.51)); +#267612 = VECTOR('',#267613,1.); +#267613 = DIRECTION('',(0.,0.,1.)); +#267614 = ORIENTED_EDGE('',*,*,#267615,.F.); +#267615 = EDGE_CURVE('',#267576,#267608,#267616,.T.); +#267616 = CIRCLE('',#267617,0.100000456609); +#267617 = AXIS2_PLACEMENT_3D('',#267618,#267619,#267620); +#267618 = CARTESIAN_POINT('',(143.74,-152.75,1.51)); +#267619 = DIRECTION('',(-0.,0.,-1.)); +#267620 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#267621 = CYLINDRICAL_SURFACE('',#267622,0.100000456609); +#267622 = AXIS2_PLACEMENT_3D('',#267623,#267624,#267625); +#267623 = CARTESIAN_POINT('',(143.74,-152.75,1.51)); +#267624 = DIRECTION('',(-0.,0.,-1.)); +#267625 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#267626 = ADVANCED_FACE('',(#267627),#267652,.T.); +#267627 = FACE_BOUND('',#267628,.T.); +#267628 = EDGE_LOOP('',(#267629,#267630,#267638,#267646)); +#267629 = ORIENTED_EDGE('',*,*,#267607,.T.); +#267630 = ORIENTED_EDGE('',*,*,#267631,.T.); +#267631 = EDGE_CURVE('',#267599,#267632,#267634,.T.); +#267632 = VERTEX_POINT('',#267633); +#267633 = CARTESIAN_POINT('',(143.64,-152.531421,1.545)); +#267634 = LINE('',#267635,#267636); +#267635 = CARTESIAN_POINT('',(143.641921,-152.769509,1.545)); +#267636 = VECTOR('',#267637,1.); +#267637 = DIRECTION('',(-8.068182666476E-03,0.999967451685,0.)); +#267638 = ORIENTED_EDGE('',*,*,#267639,.F.); +#267639 = EDGE_CURVE('',#267640,#267632,#267642,.T.); +#267640 = VERTEX_POINT('',#267641); +#267641 = CARTESIAN_POINT('',(143.64,-152.531421,1.51)); +#267642 = LINE('',#267643,#267644); +#267643 = CARTESIAN_POINT('',(143.64,-152.531421,1.51)); +#267644 = VECTOR('',#267645,1.); +#267645 = DIRECTION('',(0.,0.,1.)); +#267646 = ORIENTED_EDGE('',*,*,#267647,.F.); +#267647 = EDGE_CURVE('',#267608,#267640,#267648,.T.); +#267648 = LINE('',#267649,#267650); +#267649 = CARTESIAN_POINT('',(143.641921,-152.769509,1.51)); +#267650 = VECTOR('',#267651,1.); +#267651 = DIRECTION('',(-8.068182666476E-03,0.999967451685,0.)); +#267652 = PLANE('',#267653); +#267653 = AXIS2_PLACEMENT_3D('',#267654,#267655,#267656); +#267654 = CARTESIAN_POINT('',(143.641921,-152.769509,1.51)); +#267655 = DIRECTION('',(-0.999967451685,-8.068182666476E-03,0.)); +#267656 = DIRECTION('',(-8.068182666476E-03,0.999967451685,0.)); +#267657 = ADVANCED_FACE('',(#267658),#267683,.T.); +#267658 = FACE_BOUND('',#267659,.T.); +#267659 = EDGE_LOOP('',(#267660,#267661,#267669,#267677)); +#267660 = ORIENTED_EDGE('',*,*,#267639,.T.); +#267661 = ORIENTED_EDGE('',*,*,#267662,.T.); +#267662 = EDGE_CURVE('',#267632,#267663,#267665,.T.); +#267663 = VERTEX_POINT('',#267664); +#267664 = CARTESIAN_POINT('',(142.708578,-151.6,1.545)); +#267665 = LINE('',#267666,#267667); +#267666 = CARTESIAN_POINT('',(143.64,-152.531421,1.545)); +#267667 = VECTOR('',#267668,1.); +#267668 = DIRECTION('',(-0.707107160771,0.707106401602,0.)); +#267669 = ORIENTED_EDGE('',*,*,#267670,.F.); +#267670 = EDGE_CURVE('',#267671,#267663,#267673,.T.); +#267671 = VERTEX_POINT('',#267672); +#267672 = CARTESIAN_POINT('',(142.708578,-151.6,1.51)); +#267673 = LINE('',#267674,#267675); +#267674 = CARTESIAN_POINT('',(142.708578,-151.6,1.51)); +#267675 = VECTOR('',#267676,1.); +#267676 = DIRECTION('',(0.,0.,1.)); +#267677 = ORIENTED_EDGE('',*,*,#267678,.F.); +#267678 = EDGE_CURVE('',#267640,#267671,#267679,.T.); +#267679 = LINE('',#267680,#267681); +#267680 = CARTESIAN_POINT('',(143.64,-152.531421,1.51)); +#267681 = VECTOR('',#267682,1.); +#267682 = DIRECTION('',(-0.707107160771,0.707106401602,0.)); +#267683 = PLANE('',#267684); +#267684 = AXIS2_PLACEMENT_3D('',#267685,#267686,#267687); +#267685 = CARTESIAN_POINT('',(143.64,-152.531421,1.51)); +#267686 = DIRECTION('',(-0.707106401602,-0.707107160771,0.)); +#267687 = DIRECTION('',(-0.707107160771,0.707106401602,0.)); +#267688 = ADVANCED_FACE('',(#267689),#267714,.T.); +#267689 = FACE_BOUND('',#267690,.T.); +#267690 = EDGE_LOOP('',(#267691,#267692,#267700,#267708)); +#267691 = ORIENTED_EDGE('',*,*,#267670,.T.); +#267692 = ORIENTED_EDGE('',*,*,#267693,.T.); +#267693 = EDGE_CURVE('',#267663,#267694,#267696,.T.); +#267694 = VERTEX_POINT('',#267695); +#267695 = CARTESIAN_POINT('',(139.541421,-151.6,1.545)); +#267696 = LINE('',#267697,#267698); +#267697 = CARTESIAN_POINT('',(142.708578,-151.6,1.545)); +#267698 = VECTOR('',#267699,1.); +#267699 = DIRECTION('',(-1.,0.,0.)); +#267700 = ORIENTED_EDGE('',*,*,#267701,.F.); +#267701 = EDGE_CURVE('',#267702,#267694,#267704,.T.); +#267702 = VERTEX_POINT('',#267703); +#267703 = CARTESIAN_POINT('',(139.541421,-151.6,1.51)); +#267704 = LINE('',#267705,#267706); +#267705 = CARTESIAN_POINT('',(139.541421,-151.6,1.51)); +#267706 = VECTOR('',#267707,1.); +#267707 = DIRECTION('',(0.,0.,1.)); +#267708 = ORIENTED_EDGE('',*,*,#267709,.F.); +#267709 = EDGE_CURVE('',#267671,#267702,#267710,.T.); +#267710 = LINE('',#267711,#267712); +#267711 = CARTESIAN_POINT('',(142.708578,-151.6,1.51)); +#267712 = VECTOR('',#267713,1.); +#267713 = DIRECTION('',(-1.,0.,0.)); +#267714 = PLANE('',#267715); +#267715 = AXIS2_PLACEMENT_3D('',#267716,#267717,#267718); +#267716 = CARTESIAN_POINT('',(142.708578,-151.6,1.51)); +#267717 = DIRECTION('',(0.,-1.,0.)); +#267718 = DIRECTION('',(-1.,0.,0.)); +#267719 = ADVANCED_FACE('',(#267720),#267745,.T.); +#267720 = FACE_BOUND('',#267721,.T.); +#267721 = EDGE_LOOP('',(#267722,#267723,#267731,#267739)); +#267722 = ORIENTED_EDGE('',*,*,#267701,.T.); +#267723 = ORIENTED_EDGE('',*,*,#267724,.T.); +#267724 = EDGE_CURVE('',#267694,#267725,#267727,.T.); +#267725 = VERTEX_POINT('',#267726); +#267726 = CARTESIAN_POINT('',(139.35,-151.791421,1.545)); +#267727 = LINE('',#267728,#267729); +#267728 = CARTESIAN_POINT('',(139.541421,-151.6,1.545)); +#267729 = VECTOR('',#267730,1.); +#267730 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#267731 = ORIENTED_EDGE('',*,*,#267732,.F.); +#267732 = EDGE_CURVE('',#267733,#267725,#267735,.T.); +#267733 = VERTEX_POINT('',#267734); +#267734 = CARTESIAN_POINT('',(139.35,-151.791421,1.51)); +#267735 = LINE('',#267736,#267737); +#267736 = CARTESIAN_POINT('',(139.35,-151.791421,1.51)); +#267737 = VECTOR('',#267738,1.); +#267738 = DIRECTION('',(0.,0.,1.)); +#267739 = ORIENTED_EDGE('',*,*,#267740,.F.); +#267740 = EDGE_CURVE('',#267702,#267733,#267741,.T.); +#267741 = LINE('',#267742,#267743); +#267742 = CARTESIAN_POINT('',(139.541421,-151.6,1.51)); +#267743 = VECTOR('',#267744,1.); +#267744 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#267745 = PLANE('',#267746); +#267746 = AXIS2_PLACEMENT_3D('',#267747,#267748,#267749); +#267747 = CARTESIAN_POINT('',(139.541421,-151.6,1.51)); +#267748 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#267749 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#267750 = ADVANCED_FACE('',(#267751),#267776,.T.); +#267751 = FACE_BOUND('',#267752,.T.); +#267752 = EDGE_LOOP('',(#267753,#267754,#267762,#267770)); +#267753 = ORIENTED_EDGE('',*,*,#267732,.T.); +#267754 = ORIENTED_EDGE('',*,*,#267755,.T.); +#267755 = EDGE_CURVE('',#267725,#267756,#267758,.T.); +#267756 = VERTEX_POINT('',#267757); +#267757 = CARTESIAN_POINT('',(139.348079,-153.074509,1.545)); +#267758 = LINE('',#267759,#267760); +#267759 = CARTESIAN_POINT('',(139.35,-151.791421,1.545)); +#267760 = VECTOR('',#267761,1.); +#267761 = DIRECTION('',(-1.497167651018E-03,-0.999998879244,0.)); +#267762 = ORIENTED_EDGE('',*,*,#267763,.F.); +#267763 = EDGE_CURVE('',#267764,#267756,#267766,.T.); +#267764 = VERTEX_POINT('',#267765); +#267765 = CARTESIAN_POINT('',(139.348079,-153.074509,1.51)); +#267766 = LINE('',#267767,#267768); +#267767 = CARTESIAN_POINT('',(139.348079,-153.074509,1.51)); +#267768 = VECTOR('',#267769,1.); +#267769 = DIRECTION('',(0.,0.,1.)); +#267770 = ORIENTED_EDGE('',*,*,#267771,.F.); +#267771 = EDGE_CURVE('',#267733,#267764,#267772,.T.); +#267772 = LINE('',#267773,#267774); +#267773 = CARTESIAN_POINT('',(139.35,-151.791421,1.51)); +#267774 = VECTOR('',#267775,1.); +#267775 = DIRECTION('',(-1.497167651018E-03,-0.999998879244,0.)); +#267776 = PLANE('',#267777); +#267777 = AXIS2_PLACEMENT_3D('',#267778,#267779,#267780); +#267778 = CARTESIAN_POINT('',(139.35,-151.791421,1.51)); +#267779 = DIRECTION('',(0.999998879244,-1.497167651018E-03,0.)); +#267780 = DIRECTION('',(-1.497167651018E-03,-0.999998879244,0.)); +#267781 = ADVANCED_FACE('',(#267782),#267809,.T.); +#267782 = FACE_BOUND('',#267783,.T.); +#267783 = EDGE_LOOP('',(#267784,#267785,#267794,#267802)); +#267784 = ORIENTED_EDGE('',*,*,#267763,.T.); +#267785 = ORIENTED_EDGE('',*,*,#267786,.T.); +#267786 = EDGE_CURVE('',#267756,#267787,#267789,.T.); +#267787 = VERTEX_POINT('',#267788); +#267788 = CARTESIAN_POINT('',(139.151921,-153.074509,1.545)); +#267789 = CIRCLE('',#267790,0.100000456609); +#267790 = AXIS2_PLACEMENT_3D('',#267791,#267792,#267793); +#267791 = CARTESIAN_POINT('',(139.25,-153.055,1.545)); +#267792 = DIRECTION('',(-0.,0.,-1.)); +#267793 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267794 = ORIENTED_EDGE('',*,*,#267795,.F.); +#267795 = EDGE_CURVE('',#267796,#267787,#267798,.T.); +#267796 = VERTEX_POINT('',#267797); +#267797 = CARTESIAN_POINT('',(139.151921,-153.074509,1.51)); +#267798 = LINE('',#267799,#267800); +#267799 = CARTESIAN_POINT('',(139.151921,-153.074509,1.51)); +#267800 = VECTOR('',#267801,1.); +#267801 = DIRECTION('',(0.,0.,1.)); +#267802 = ORIENTED_EDGE('',*,*,#267803,.F.); +#267803 = EDGE_CURVE('',#267764,#267796,#267804,.T.); +#267804 = CIRCLE('',#267805,0.100000456609); +#267805 = AXIS2_PLACEMENT_3D('',#267806,#267807,#267808); +#267806 = CARTESIAN_POINT('',(139.25,-153.055,1.51)); +#267807 = DIRECTION('',(-0.,0.,-1.)); +#267808 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267809 = CYLINDRICAL_SURFACE('',#267810,0.100000456609); +#267810 = AXIS2_PLACEMENT_3D('',#267811,#267812,#267813); +#267811 = CARTESIAN_POINT('',(139.25,-153.055,1.51)); +#267812 = DIRECTION('',(-0.,0.,-1.)); +#267813 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#267814 = ADVANCED_FACE('',(#267815),#267840,.T.); +#267815 = FACE_BOUND('',#267816,.T.); +#267816 = EDGE_LOOP('',(#267817,#267818,#267826,#267834)); +#267817 = ORIENTED_EDGE('',*,*,#267795,.T.); +#267818 = ORIENTED_EDGE('',*,*,#267819,.T.); +#267819 = EDGE_CURVE('',#267787,#267820,#267822,.T.); +#267820 = VERTEX_POINT('',#267821); +#267821 = CARTESIAN_POINT('',(139.151921,-151.730491,1.545)); +#267822 = LINE('',#267823,#267824); +#267823 = CARTESIAN_POINT('',(139.151921,-153.074509,1.545)); +#267824 = VECTOR('',#267825,1.); +#267825 = DIRECTION('',(0.,1.,0.)); +#267826 = ORIENTED_EDGE('',*,*,#267827,.F.); +#267827 = EDGE_CURVE('',#267828,#267820,#267830,.T.); +#267828 = VERTEX_POINT('',#267829); +#267829 = CARTESIAN_POINT('',(139.151921,-151.730491,1.51)); +#267830 = LINE('',#267831,#267832); +#267831 = CARTESIAN_POINT('',(139.151921,-151.730491,1.51)); +#267832 = VECTOR('',#267833,1.); +#267833 = DIRECTION('',(0.,0.,1.)); +#267834 = ORIENTED_EDGE('',*,*,#267835,.F.); +#267835 = EDGE_CURVE('',#267796,#267828,#267836,.T.); +#267836 = LINE('',#267837,#267838); +#267837 = CARTESIAN_POINT('',(139.151921,-153.074509,1.51)); +#267838 = VECTOR('',#267839,1.); +#267839 = DIRECTION('',(0.,1.,0.)); +#267840 = PLANE('',#267841); +#267841 = AXIS2_PLACEMENT_3D('',#267842,#267843,#267844); +#267842 = CARTESIAN_POINT('',(139.151921,-153.074509,1.51)); +#267843 = DIRECTION('',(-1.,0.,0.)); +#267844 = DIRECTION('',(0.,1.,0.)); +#267845 = ADVANCED_FACE('',(#267846),#267871,.T.); +#267846 = FACE_BOUND('',#267847,.T.); +#267847 = EDGE_LOOP('',(#267848,#267849,#267857,#267865)); +#267848 = ORIENTED_EDGE('',*,*,#267827,.T.); +#267849 = ORIENTED_EDGE('',*,*,#267850,.T.); +#267850 = EDGE_CURVE('',#267820,#267851,#267853,.T.); +#267851 = VERTEX_POINT('',#267852); +#267852 = CARTESIAN_POINT('',(139.166853,-151.694443,1.545)); +#267853 = LINE('',#267854,#267855); +#267854 = CARTESIAN_POINT('',(139.151921,-151.730491,1.545)); +#267855 = VECTOR('',#267856,1.); +#267856 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#267857 = ORIENTED_EDGE('',*,*,#267858,.F.); +#267858 = EDGE_CURVE('',#267859,#267851,#267861,.T.); +#267859 = VERTEX_POINT('',#267860); +#267860 = CARTESIAN_POINT('',(139.166853,-151.694443,1.51)); +#267861 = LINE('',#267862,#267863); +#267862 = CARTESIAN_POINT('',(139.166853,-151.694443,1.51)); +#267863 = VECTOR('',#267864,1.); +#267864 = DIRECTION('',(0.,0.,1.)); +#267865 = ORIENTED_EDGE('',*,*,#267866,.F.); +#267866 = EDGE_CURVE('',#267828,#267859,#267867,.T.); +#267867 = LINE('',#267868,#267869); +#267868 = CARTESIAN_POINT('',(139.151921,-151.730491,1.51)); +#267869 = VECTOR('',#267870,1.); +#267870 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#267871 = PLANE('',#267872); +#267872 = AXIS2_PLACEMENT_3D('',#267873,#267874,#267875); +#267873 = CARTESIAN_POINT('',(139.151921,-151.730491,1.51)); +#267874 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#267875 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#267876 = ADVANCED_FACE('',(#267877),#267893,.T.); +#267877 = FACE_BOUND('',#267878,.T.); +#267878 = EDGE_LOOP('',(#267879,#267880,#267886,#267887)); +#267879 = ORIENTED_EDGE('',*,*,#267858,.T.); +#267880 = ORIENTED_EDGE('',*,*,#267881,.T.); +#267881 = EDGE_CURVE('',#267851,#267405,#267882,.T.); +#267882 = LINE('',#267883,#267884); +#267883 = CARTESIAN_POINT('',(139.166853,-151.694443,1.545)); +#267884 = VECTOR('',#267885,1.); +#267885 = DIRECTION('',(0.70710550753,0.707108054841,0.)); +#267886 = ORIENTED_EDGE('',*,*,#267402,.F.); +#267887 = ORIENTED_EDGE('',*,*,#267888,.F.); +#267888 = EDGE_CURVE('',#267859,#267403,#267889,.T.); +#267889 = LINE('',#267890,#267891); +#267890 = CARTESIAN_POINT('',(139.166853,-151.694443,1.51)); +#267891 = VECTOR('',#267892,1.); +#267892 = DIRECTION('',(0.70710550753,0.707108054841,0.)); +#267893 = PLANE('',#267894); +#267894 = AXIS2_PLACEMENT_3D('',#267895,#267896,#267897); +#267895 = CARTESIAN_POINT('',(139.166853,-151.694443,1.51)); +#267896 = DIRECTION('',(-0.707108054841,0.70710550753,0.)); +#267897 = DIRECTION('',(0.70710550753,0.707108054841,0.)); +#267898 = ADVANCED_FACE('',(#267899),#267917,.F.); +#267899 = FACE_BOUND('',#267900,.T.); +#267900 = EDGE_LOOP('',(#267901,#267902,#267903,#267904,#267905,#267906, + #267907,#267908,#267909,#267910,#267911,#267912,#267913,#267914, + #267915,#267916)); +#267901 = ORIENTED_EDGE('',*,*,#267428,.T.); +#267902 = ORIENTED_EDGE('',*,*,#267459,.T.); +#267903 = ORIENTED_EDGE('',*,*,#267490,.T.); +#267904 = ORIENTED_EDGE('',*,*,#267521,.T.); +#267905 = ORIENTED_EDGE('',*,*,#267552,.T.); +#267906 = ORIENTED_EDGE('',*,*,#267583,.T.); +#267907 = ORIENTED_EDGE('',*,*,#267615,.T.); +#267908 = ORIENTED_EDGE('',*,*,#267647,.T.); +#267909 = ORIENTED_EDGE('',*,*,#267678,.T.); +#267910 = ORIENTED_EDGE('',*,*,#267709,.T.); +#267911 = ORIENTED_EDGE('',*,*,#267740,.T.); +#267912 = ORIENTED_EDGE('',*,*,#267771,.T.); +#267913 = ORIENTED_EDGE('',*,*,#267803,.T.); +#267914 = ORIENTED_EDGE('',*,*,#267835,.T.); +#267915 = ORIENTED_EDGE('',*,*,#267866,.T.); +#267916 = ORIENTED_EDGE('',*,*,#267888,.T.); +#267917 = PLANE('',#267918); +#267918 = AXIS2_PLACEMENT_3D('',#267919,#267920,#267921); +#267919 = CARTESIAN_POINT('',(0.,0.,1.51)); +#267920 = DIRECTION('',(0.,0.,1.)); +#267921 = DIRECTION('',(1.,0.,-0.)); +#267922 = ADVANCED_FACE('',(#267923),#267941,.T.); +#267923 = FACE_BOUND('',#267924,.F.); +#267924 = EDGE_LOOP('',(#267925,#267926,#267927,#267928,#267929,#267930, + #267931,#267932,#267933,#267934,#267935,#267936,#267937,#267938, + #267939,#267940)); +#267925 = ORIENTED_EDGE('',*,*,#267412,.T.); +#267926 = ORIENTED_EDGE('',*,*,#267443,.T.); +#267927 = ORIENTED_EDGE('',*,*,#267474,.T.); +#267928 = ORIENTED_EDGE('',*,*,#267505,.T.); +#267929 = ORIENTED_EDGE('',*,*,#267536,.T.); +#267930 = ORIENTED_EDGE('',*,*,#267567,.T.); +#267931 = ORIENTED_EDGE('',*,*,#267598,.T.); +#267932 = ORIENTED_EDGE('',*,*,#267631,.T.); +#267933 = ORIENTED_EDGE('',*,*,#267662,.T.); +#267934 = ORIENTED_EDGE('',*,*,#267693,.T.); +#267935 = ORIENTED_EDGE('',*,*,#267724,.T.); +#267936 = ORIENTED_EDGE('',*,*,#267755,.T.); +#267937 = ORIENTED_EDGE('',*,*,#267786,.T.); +#267938 = ORIENTED_EDGE('',*,*,#267819,.T.); +#267939 = ORIENTED_EDGE('',*,*,#267850,.T.); +#267940 = ORIENTED_EDGE('',*,*,#267881,.T.); +#267941 = PLANE('',#267942); +#267942 = AXIS2_PLACEMENT_3D('',#267943,#267944,#267945); +#267943 = CARTESIAN_POINT('',(0.,0.,1.545)); +#267944 = DIRECTION('',(0.,0.,1.)); +#267945 = DIRECTION('',(1.,0.,-0.)); +#267946 = MANIFOLD_SOLID_BREP('',#267947); +#267947 = CLOSED_SHELL('',(#267948,#267988,#268019,#268050,#268083, + #268114,#268136,#268150)); +#267948 = ADVANCED_FACE('',(#267949),#267983,.T.); +#267949 = FACE_BOUND('',#267950,.T.); +#267950 = EDGE_LOOP('',(#267951,#267961,#267969,#267977)); +#267951 = ORIENTED_EDGE('',*,*,#267952,.T.); +#267952 = EDGE_CURVE('',#267953,#267955,#267957,.T.); +#267953 = VERTEX_POINT('',#267954); +#267954 = CARTESIAN_POINT('',(134.171209,-127.913336,1.51)); +#267955 = VERTEX_POINT('',#267956); +#267956 = CARTESIAN_POINT('',(134.171209,-127.913336,1.545)); +#267957 = LINE('',#267958,#267959); +#267958 = CARTESIAN_POINT('',(134.171209,-127.913336,1.51)); +#267959 = VECTOR('',#267960,1.); +#267960 = DIRECTION('',(0.,0.,1.)); +#267961 = ORIENTED_EDGE('',*,*,#267962,.T.); +#267962 = EDGE_CURVE('',#267955,#267963,#267965,.T.); +#267963 = VERTEX_POINT('',#267964); +#267964 = CARTESIAN_POINT('',(134.272353,-127.854941,1.545)); +#267965 = LINE('',#267966,#267967); +#267966 = CARTESIAN_POINT('',(134.171209,-127.913336,1.545)); +#267967 = VECTOR('',#267968,1.); +#267968 = DIRECTION('',(0.866027315513,0.499996688774,0.)); +#267969 = ORIENTED_EDGE('',*,*,#267970,.F.); +#267970 = EDGE_CURVE('',#267971,#267963,#267973,.T.); +#267971 = VERTEX_POINT('',#267972); +#267972 = CARTESIAN_POINT('',(134.272353,-127.854941,1.51)); +#267973 = LINE('',#267974,#267975); +#267974 = CARTESIAN_POINT('',(134.272353,-127.854941,1.51)); +#267975 = VECTOR('',#267976,1.); +#267976 = DIRECTION('',(0.,0.,1.)); +#267977 = ORIENTED_EDGE('',*,*,#267978,.F.); +#267978 = EDGE_CURVE('',#267953,#267971,#267979,.T.); +#267979 = LINE('',#267980,#267981); +#267980 = CARTESIAN_POINT('',(134.171209,-127.913336,1.51)); +#267981 = VECTOR('',#267982,1.); +#267982 = DIRECTION('',(0.866027315513,0.499996688774,0.)); +#267983 = PLANE('',#267984); +#267984 = AXIS2_PLACEMENT_3D('',#267985,#267986,#267987); +#267985 = CARTESIAN_POINT('',(134.171209,-127.913336,1.51)); +#267986 = DIRECTION('',(-0.499996688774,0.866027315513,0.)); +#267987 = DIRECTION('',(0.866027315513,0.499996688774,0.)); +#267988 = ADVANCED_FACE('',(#267989),#268014,.T.); +#267989 = FACE_BOUND('',#267990,.T.); +#267990 = EDGE_LOOP('',(#267991,#267992,#268000,#268008)); +#267991 = ORIENTED_EDGE('',*,*,#267970,.T.); +#267992 = ORIENTED_EDGE('',*,*,#267993,.T.); +#267993 = EDGE_CURVE('',#267963,#267994,#267996,.T.); +#267994 = VERTEX_POINT('',#267995); +#267995 = CARTESIAN_POINT('',(134.338079,-127.789215,1.545)); +#267996 = LINE('',#267997,#267998); +#267997 = CARTESIAN_POINT('',(134.272353,-127.854941,1.545)); +#267998 = VECTOR('',#267999,1.); +#267999 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#268000 = ORIENTED_EDGE('',*,*,#268001,.F.); +#268001 = EDGE_CURVE('',#268002,#267994,#268004,.T.); +#268002 = VERTEX_POINT('',#268003); +#268003 = CARTESIAN_POINT('',(134.338079,-127.789215,1.51)); +#268004 = LINE('',#268005,#268006); +#268005 = CARTESIAN_POINT('',(134.338079,-127.789215,1.51)); +#268006 = VECTOR('',#268007,1.); +#268007 = DIRECTION('',(0.,0.,1.)); +#268008 = ORIENTED_EDGE('',*,*,#268009,.F.); +#268009 = EDGE_CURVE('',#267971,#268002,#268010,.T.); +#268010 = LINE('',#268011,#268012); +#268011 = CARTESIAN_POINT('',(134.272353,-127.854941,1.51)); +#268012 = VECTOR('',#268013,1.); +#268013 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#268014 = PLANE('',#268015); +#268015 = AXIS2_PLACEMENT_3D('',#268016,#268017,#268018); +#268016 = CARTESIAN_POINT('',(134.272353,-127.854941,1.51)); +#268017 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#268018 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#268019 = ADVANCED_FACE('',(#268020),#268045,.T.); +#268020 = FACE_BOUND('',#268021,.T.); +#268021 = EDGE_LOOP('',(#268022,#268023,#268031,#268039)); +#268022 = ORIENTED_EDGE('',*,*,#268001,.T.); +#268023 = ORIENTED_EDGE('',*,*,#268024,.T.); +#268024 = EDGE_CURVE('',#267994,#268025,#268027,.T.); +#268025 = VERTEX_POINT('',#268026); +#268026 = CARTESIAN_POINT('',(134.338079,-130.019509,1.545)); +#268027 = LINE('',#268028,#268029); +#268028 = CARTESIAN_POINT('',(134.338079,-127.789215,1.545)); +#268029 = VECTOR('',#268030,1.); +#268030 = DIRECTION('',(0.,-1.,0.)); +#268031 = ORIENTED_EDGE('',*,*,#268032,.F.); +#268032 = EDGE_CURVE('',#268033,#268025,#268035,.T.); +#268033 = VERTEX_POINT('',#268034); +#268034 = CARTESIAN_POINT('',(134.338079,-130.019509,1.51)); +#268035 = LINE('',#268036,#268037); +#268036 = CARTESIAN_POINT('',(134.338079,-130.019509,1.51)); +#268037 = VECTOR('',#268038,1.); +#268038 = DIRECTION('',(0.,0.,1.)); +#268039 = ORIENTED_EDGE('',*,*,#268040,.F.); +#268040 = EDGE_CURVE('',#268002,#268033,#268041,.T.); +#268041 = LINE('',#268042,#268043); +#268042 = CARTESIAN_POINT('',(134.338079,-127.789215,1.51)); +#268043 = VECTOR('',#268044,1.); +#268044 = DIRECTION('',(0.,-1.,0.)); +#268045 = PLANE('',#268046); +#268046 = AXIS2_PLACEMENT_3D('',#268047,#268048,#268049); +#268047 = CARTESIAN_POINT('',(134.338079,-127.789215,1.51)); +#268048 = DIRECTION('',(1.,0.,-0.)); +#268049 = DIRECTION('',(0.,-1.,0.)); +#268050 = ADVANCED_FACE('',(#268051),#268078,.T.); +#268051 = FACE_BOUND('',#268052,.T.); +#268052 = EDGE_LOOP('',(#268053,#268054,#268063,#268071)); +#268053 = ORIENTED_EDGE('',*,*,#268032,.T.); +#268054 = ORIENTED_EDGE('',*,*,#268055,.T.); +#268055 = EDGE_CURVE('',#268025,#268056,#268058,.T.); +#268056 = VERTEX_POINT('',#268057); +#268057 = CARTESIAN_POINT('',(134.141921,-130.019509,1.545)); +#268058 = CIRCLE('',#268059,0.100000456609); +#268059 = AXIS2_PLACEMENT_3D('',#268060,#268061,#268062); +#268060 = CARTESIAN_POINT('',(134.24,-130.,1.545)); +#268061 = DIRECTION('',(-0.,0.,-1.)); +#268062 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#268063 = ORIENTED_EDGE('',*,*,#268064,.F.); +#268064 = EDGE_CURVE('',#268065,#268056,#268067,.T.); +#268065 = VERTEX_POINT('',#268066); +#268066 = CARTESIAN_POINT('',(134.141921,-130.019509,1.51)); +#268067 = LINE('',#268068,#268069); +#268068 = CARTESIAN_POINT('',(134.141921,-130.019509,1.51)); +#268069 = VECTOR('',#268070,1.); +#268070 = DIRECTION('',(0.,0.,1.)); +#268071 = ORIENTED_EDGE('',*,*,#268072,.F.); +#268072 = EDGE_CURVE('',#268033,#268065,#268073,.T.); +#268073 = CIRCLE('',#268074,0.100000456609); +#268074 = AXIS2_PLACEMENT_3D('',#268075,#268076,#268077); +#268075 = CARTESIAN_POINT('',(134.24,-130.,1.51)); +#268076 = DIRECTION('',(-0.,0.,-1.)); +#268077 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#268078 = CYLINDRICAL_SURFACE('',#268079,0.100000456609); +#268079 = AXIS2_PLACEMENT_3D('',#268080,#268081,#268082); +#268080 = CARTESIAN_POINT('',(134.24,-130.,1.51)); +#268081 = DIRECTION('',(-0.,0.,-1.)); +#268082 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#268083 = ADVANCED_FACE('',(#268084),#268109,.T.); +#268084 = FACE_BOUND('',#268085,.T.); +#268085 = EDGE_LOOP('',(#268086,#268087,#268095,#268103)); +#268086 = ORIENTED_EDGE('',*,*,#268064,.T.); +#268087 = ORIENTED_EDGE('',*,*,#268088,.T.); +#268088 = EDGE_CURVE('',#268056,#268089,#268091,.T.); +#268089 = VERTEX_POINT('',#268090); +#268090 = CARTESIAN_POINT('',(134.14012,-127.921666,1.545)); +#268091 = LINE('',#268092,#268093); +#268092 = CARTESIAN_POINT('',(134.141921,-130.019509,1.545)); +#268093 = VECTOR('',#268094,1.); +#268094 = DIRECTION('',(-8.585005342682E-04,0.999999631488,0.)); +#268095 = ORIENTED_EDGE('',*,*,#268096,.F.); +#268096 = EDGE_CURVE('',#268097,#268089,#268099,.T.); +#268097 = VERTEX_POINT('',#268098); +#268098 = CARTESIAN_POINT('',(134.14012,-127.921666,1.51)); +#268099 = LINE('',#268100,#268101); +#268100 = CARTESIAN_POINT('',(134.14012,-127.921666,1.51)); +#268101 = VECTOR('',#268102,1.); +#268102 = DIRECTION('',(0.,0.,1.)); +#268103 = ORIENTED_EDGE('',*,*,#268104,.F.); +#268104 = EDGE_CURVE('',#268065,#268097,#268105,.T.); +#268105 = LINE('',#268106,#268107); +#268106 = CARTESIAN_POINT('',(134.141921,-130.019509,1.51)); +#268107 = VECTOR('',#268108,1.); +#268108 = DIRECTION('',(-8.585005342682E-04,0.999999631488,0.)); +#268109 = PLANE('',#268110); +#268110 = AXIS2_PLACEMENT_3D('',#268111,#268112,#268113); +#268111 = CARTESIAN_POINT('',(134.141921,-130.019509,1.51)); +#268112 = DIRECTION('',(-0.999999631488,-8.585005342682E-04,0.)); +#268113 = DIRECTION('',(-8.585005342682E-04,0.999999631488,0.)); +#268114 = ADVANCED_FACE('',(#268115),#268131,.T.); +#268115 = FACE_BOUND('',#268116,.T.); +#268116 = EDGE_LOOP('',(#268117,#268118,#268124,#268125)); +#268117 = ORIENTED_EDGE('',*,*,#268096,.T.); +#268118 = ORIENTED_EDGE('',*,*,#268119,.T.); +#268119 = EDGE_CURVE('',#268089,#267955,#268120,.T.); +#268120 = LINE('',#268121,#268122); +#268121 = CARTESIAN_POINT('',(134.14012,-127.921666,1.545)); +#268122 = VECTOR('',#268123,1.); +#268123 = DIRECTION('',(0.965927942446,0.25881114737,0.)); +#268124 = ORIENTED_EDGE('',*,*,#267952,.F.); +#268125 = ORIENTED_EDGE('',*,*,#268126,.F.); +#268126 = EDGE_CURVE('',#268097,#267953,#268127,.T.); +#268127 = LINE('',#268128,#268129); +#268128 = CARTESIAN_POINT('',(134.14012,-127.921666,1.51)); +#268129 = VECTOR('',#268130,1.); +#268130 = DIRECTION('',(0.965927942446,0.25881114737,0.)); +#268131 = PLANE('',#268132); +#268132 = AXIS2_PLACEMENT_3D('',#268133,#268134,#268135); +#268133 = CARTESIAN_POINT('',(134.14012,-127.921666,1.51)); +#268134 = DIRECTION('',(-0.25881114737,0.965927942446,0.)); +#268135 = DIRECTION('',(0.965927942446,0.25881114737,0.)); +#268136 = ADVANCED_FACE('',(#268137),#268145,.F.); +#268137 = FACE_BOUND('',#268138,.T.); +#268138 = EDGE_LOOP('',(#268139,#268140,#268141,#268142,#268143,#268144) + ); +#268139 = ORIENTED_EDGE('',*,*,#267978,.T.); +#268140 = ORIENTED_EDGE('',*,*,#268009,.T.); +#268141 = ORIENTED_EDGE('',*,*,#268040,.T.); +#268142 = ORIENTED_EDGE('',*,*,#268072,.T.); +#268143 = ORIENTED_EDGE('',*,*,#268104,.T.); +#268144 = ORIENTED_EDGE('',*,*,#268126,.T.); +#268145 = PLANE('',#268146); +#268146 = AXIS2_PLACEMENT_3D('',#268147,#268148,#268149); +#268147 = CARTESIAN_POINT('',(0.,0.,1.51)); +#268148 = DIRECTION('',(0.,0.,1.)); +#268149 = DIRECTION('',(1.,0.,-0.)); +#268150 = ADVANCED_FACE('',(#268151),#268159,.T.); +#268151 = FACE_BOUND('',#268152,.F.); +#268152 = EDGE_LOOP('',(#268153,#268154,#268155,#268156,#268157,#268158) + ); +#268153 = ORIENTED_EDGE('',*,*,#267962,.T.); +#268154 = ORIENTED_EDGE('',*,*,#267993,.T.); +#268155 = ORIENTED_EDGE('',*,*,#268024,.T.); +#268156 = ORIENTED_EDGE('',*,*,#268055,.T.); +#268157 = ORIENTED_EDGE('',*,*,#268088,.T.); +#268158 = ORIENTED_EDGE('',*,*,#268119,.T.); +#268159 = PLANE('',#268160); +#268160 = AXIS2_PLACEMENT_3D('',#268161,#268162,#268163); +#268161 = CARTESIAN_POINT('',(0.,0.,1.545)); +#268162 = DIRECTION('',(0.,0.,1.)); +#268163 = DIRECTION('',(1.,0.,-0.)); +#268164 = MANIFOLD_SOLID_BREP('',#268165); +#268165 = CLOSED_SHELL('',(#268166,#268208,#268239,#268272,#268303, + #268334,#268367,#268389,#268404)); +#268166 = ADVANCED_FACE('',(#268167),#268203,.T.); +#268167 = FACE_BOUND('',#268168,.T.); +#268168 = EDGE_LOOP('',(#268169,#268179,#268188,#268196)); +#268169 = ORIENTED_EDGE('',*,*,#268170,.T.); +#268170 = EDGE_CURVE('',#268171,#268173,#268175,.T.); +#268171 = VERTEX_POINT('',#268172); +#268172 = CARTESIAN_POINT('',(135.161921,-129.980491,1.51)); +#268173 = VERTEX_POINT('',#268174); +#268174 = CARTESIAN_POINT('',(135.161921,-129.980491,1.545)); +#268175 = LINE('',#268176,#268177); +#268176 = CARTESIAN_POINT('',(135.161921,-129.980491,1.51)); +#268177 = VECTOR('',#268178,1.); +#268178 = DIRECTION('',(0.,0.,1.)); +#268179 = ORIENTED_EDGE('',*,*,#268180,.T.); +#268180 = EDGE_CURVE('',#268173,#268181,#268183,.T.); +#268181 = VERTEX_POINT('',#268182); +#268182 = CARTESIAN_POINT('',(135.240491,-129.901921,1.545)); +#268183 = CIRCLE('',#268184,0.100002891901); +#268184 = AXIS2_PLACEMENT_3D('',#268185,#268186,#268187); +#268185 = CARTESIAN_POINT('',(135.26000207103,-130.000002071,1.545)); +#268186 = DIRECTION('',(0.,0.,-1.)); +#268187 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#268188 = ORIENTED_EDGE('',*,*,#268189,.F.); +#268189 = EDGE_CURVE('',#268190,#268181,#268192,.T.); +#268190 = VERTEX_POINT('',#268191); +#268191 = CARTESIAN_POINT('',(135.240491,-129.901921,1.51)); +#268192 = LINE('',#268193,#268194); +#268193 = CARTESIAN_POINT('',(135.240491,-129.901921,1.51)); +#268194 = VECTOR('',#268195,1.); +#268195 = DIRECTION('',(0.,0.,1.)); +#268196 = ORIENTED_EDGE('',*,*,#268197,.F.); +#268197 = EDGE_CURVE('',#268171,#268190,#268198,.T.); +#268198 = CIRCLE('',#268199,0.100002891901); +#268199 = AXIS2_PLACEMENT_3D('',#268200,#268201,#268202); +#268200 = CARTESIAN_POINT('',(135.26000207103,-130.000002071,1.51)); +#268201 = DIRECTION('',(0.,0.,-1.)); +#268202 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#268203 = CYLINDRICAL_SURFACE('',#268204,0.100002891901); +#268204 = AXIS2_PLACEMENT_3D('',#268205,#268206,#268207); +#268205 = CARTESIAN_POINT('',(135.26000207103,-130.000002071,1.51)); +#268206 = DIRECTION('',(0.,0.,-1.)); +#268207 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#268208 = ADVANCED_FACE('',(#268209),#268234,.T.); +#268209 = FACE_BOUND('',#268210,.T.); +#268210 = EDGE_LOOP('',(#268211,#268212,#268220,#268228)); +#268211 = ORIENTED_EDGE('',*,*,#268189,.T.); +#268212 = ORIENTED_EDGE('',*,*,#268213,.T.); +#268213 = EDGE_CURVE('',#268181,#268214,#268216,.T.); +#268214 = VERTEX_POINT('',#268215); +#268215 = CARTESIAN_POINT('',(136.759509,-129.901921,1.545)); +#268216 = LINE('',#268217,#268218); +#268217 = CARTESIAN_POINT('',(135.240491,-129.901921,1.545)); +#268218 = VECTOR('',#268219,1.); +#268219 = DIRECTION('',(1.,0.,0.)); +#268220 = ORIENTED_EDGE('',*,*,#268221,.F.); +#268221 = EDGE_CURVE('',#268222,#268214,#268224,.T.); +#268222 = VERTEX_POINT('',#268223); +#268223 = CARTESIAN_POINT('',(136.759509,-129.901921,1.51)); +#268224 = LINE('',#268225,#268226); +#268225 = CARTESIAN_POINT('',(136.759509,-129.901921,1.51)); +#268226 = VECTOR('',#268227,1.); +#268227 = DIRECTION('',(0.,0.,1.)); +#268228 = ORIENTED_EDGE('',*,*,#268229,.F.); +#268229 = EDGE_CURVE('',#268190,#268222,#268230,.T.); +#268230 = LINE('',#268231,#268232); +#268231 = CARTESIAN_POINT('',(135.240491,-129.901921,1.51)); +#268232 = VECTOR('',#268233,1.); +#268233 = DIRECTION('',(1.,0.,0.)); +#268234 = PLANE('',#268235); +#268235 = AXIS2_PLACEMENT_3D('',#268236,#268237,#268238); +#268236 = CARTESIAN_POINT('',(135.240491,-129.901921,1.51)); +#268237 = DIRECTION('',(0.,1.,0.)); +#268238 = DIRECTION('',(1.,0.,0.)); +#268239 = ADVANCED_FACE('',(#268240),#268267,.T.); +#268240 = FACE_BOUND('',#268241,.T.); +#268241 = EDGE_LOOP('',(#268242,#268243,#268252,#268260)); +#268242 = ORIENTED_EDGE('',*,*,#268221,.T.); +#268243 = ORIENTED_EDGE('',*,*,#268244,.T.); +#268244 = EDGE_CURVE('',#268214,#268245,#268247,.T.); +#268245 = VERTEX_POINT('',#268246); +#268246 = CARTESIAN_POINT('',(136.759509,-130.098079,1.545)); +#268247 = CIRCLE('',#268248,0.100000456609); +#268248 = AXIS2_PLACEMENT_3D('',#268249,#268250,#268251); +#268249 = CARTESIAN_POINT('',(136.74,-130.,1.545)); +#268250 = DIRECTION('',(0.,0.,-1.)); +#268251 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#268252 = ORIENTED_EDGE('',*,*,#268253,.F.); +#268253 = EDGE_CURVE('',#268254,#268245,#268256,.T.); +#268254 = VERTEX_POINT('',#268255); +#268255 = CARTESIAN_POINT('',(136.759509,-130.098079,1.51)); +#268256 = LINE('',#268257,#268258); +#268257 = CARTESIAN_POINT('',(136.759509,-130.098079,1.51)); +#268258 = VECTOR('',#268259,1.); +#268259 = DIRECTION('',(0.,0.,1.)); +#268260 = ORIENTED_EDGE('',*,*,#268261,.F.); +#268261 = EDGE_CURVE('',#268222,#268254,#268262,.T.); +#268262 = CIRCLE('',#268263,0.100000456609); +#268263 = AXIS2_PLACEMENT_3D('',#268264,#268265,#268266); +#268264 = CARTESIAN_POINT('',(136.74,-130.,1.51)); +#268265 = DIRECTION('',(0.,0.,-1.)); +#268266 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#268267 = CYLINDRICAL_SURFACE('',#268268,0.100000456609); +#268268 = AXIS2_PLACEMENT_3D('',#268269,#268270,#268271); +#268269 = CARTESIAN_POINT('',(136.74,-130.,1.51)); +#268270 = DIRECTION('',(0.,0.,-1.)); +#268271 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#268272 = ADVANCED_FACE('',(#268273),#268298,.T.); +#268273 = FACE_BOUND('',#268274,.T.); +#268274 = EDGE_LOOP('',(#268275,#268276,#268284,#268292)); +#268275 = ORIENTED_EDGE('',*,*,#268253,.T.); +#268276 = ORIENTED_EDGE('',*,*,#268277,.T.); +#268277 = EDGE_CURVE('',#268245,#268278,#268280,.T.); +#268278 = VERTEX_POINT('',#268279); +#268279 = CARTESIAN_POINT('',(135.36,-130.1,1.545)); +#268280 = LINE('',#268281,#268282); +#268281 = CARTESIAN_POINT('',(136.759509,-130.098079,1.545)); +#268282 = VECTOR('',#268283,1.); +#268283 = DIRECTION('',(-0.999999057953,-1.372622962988E-03,0.)); +#268284 = ORIENTED_EDGE('',*,*,#268285,.F.); +#268285 = EDGE_CURVE('',#268286,#268278,#268288,.T.); +#268286 = VERTEX_POINT('',#268287); +#268287 = CARTESIAN_POINT('',(135.36,-130.1,1.51)); +#268288 = LINE('',#268289,#268290); +#268289 = CARTESIAN_POINT('',(135.36,-130.1,1.51)); +#268290 = VECTOR('',#268291,1.); +#268291 = DIRECTION('',(0.,0.,1.)); +#268292 = ORIENTED_EDGE('',*,*,#268293,.F.); +#268293 = EDGE_CURVE('',#268254,#268286,#268294,.T.); +#268294 = LINE('',#268295,#268296); +#268295 = CARTESIAN_POINT('',(136.759509,-130.098079,1.51)); +#268296 = VECTOR('',#268297,1.); +#268297 = DIRECTION('',(-0.999999057953,-1.372622962988E-03,0.)); +#268298 = PLANE('',#268299); +#268299 = AXIS2_PLACEMENT_3D('',#268300,#268301,#268302); +#268300 = CARTESIAN_POINT('',(136.759509,-130.098079,1.51)); +#268301 = DIRECTION('',(1.372622962988E-03,-0.999999057953,0.)); +#268302 = DIRECTION('',(-0.999999057953,-1.372622962988E-03,0.)); +#268303 = ADVANCED_FACE('',(#268304),#268329,.T.); +#268304 = FACE_BOUND('',#268305,.T.); +#268305 = EDGE_LOOP('',(#268306,#268307,#268315,#268323)); +#268306 = ORIENTED_EDGE('',*,*,#268285,.T.); +#268307 = ORIENTED_EDGE('',*,*,#268308,.T.); +#268308 = EDGE_CURVE('',#268278,#268309,#268311,.T.); +#268309 = VERTEX_POINT('',#268310); +#268310 = CARTESIAN_POINT('',(135.358079,-131.009509,1.545)); +#268311 = LINE('',#268312,#268313); +#268312 = CARTESIAN_POINT('',(135.36,-130.1,1.545)); +#268313 = VECTOR('',#268314,1.); +#268314 = DIRECTION('',(-2.112123920874E-03,-0.999997769464,0.)); +#268315 = ORIENTED_EDGE('',*,*,#268316,.F.); +#268316 = EDGE_CURVE('',#268317,#268309,#268319,.T.); +#268317 = VERTEX_POINT('',#268318); +#268318 = CARTESIAN_POINT('',(135.358079,-131.009509,1.51)); +#268319 = LINE('',#268320,#268321); +#268320 = CARTESIAN_POINT('',(135.358079,-131.009509,1.51)); +#268321 = VECTOR('',#268322,1.); +#268322 = DIRECTION('',(0.,0.,1.)); +#268323 = ORIENTED_EDGE('',*,*,#268324,.F.); +#268324 = EDGE_CURVE('',#268286,#268317,#268325,.T.); +#268325 = LINE('',#268326,#268327); +#268326 = CARTESIAN_POINT('',(135.36,-130.1,1.51)); +#268327 = VECTOR('',#268328,1.); +#268328 = DIRECTION('',(-2.112123920874E-03,-0.999997769464,0.)); +#268329 = PLANE('',#268330); +#268330 = AXIS2_PLACEMENT_3D('',#268331,#268332,#268333); +#268331 = CARTESIAN_POINT('',(135.36,-130.1,1.51)); +#268332 = DIRECTION('',(0.999997769464,-2.112123920874E-03,0.)); +#268333 = DIRECTION('',(-2.112123920874E-03,-0.999997769464,0.)); +#268334 = ADVANCED_FACE('',(#268335),#268362,.T.); +#268335 = FACE_BOUND('',#268336,.T.); +#268336 = EDGE_LOOP('',(#268337,#268338,#268347,#268355)); +#268337 = ORIENTED_EDGE('',*,*,#268316,.T.); +#268338 = ORIENTED_EDGE('',*,*,#268339,.T.); +#268339 = EDGE_CURVE('',#268309,#268340,#268342,.T.); +#268340 = VERTEX_POINT('',#268341); +#268341 = CARTESIAN_POINT('',(135.161921,-131.009509,1.545)); +#268342 = CIRCLE('',#268343,0.100000456609); +#268343 = AXIS2_PLACEMENT_3D('',#268344,#268345,#268346); +#268344 = CARTESIAN_POINT('',(135.26,-130.99,1.545)); +#268345 = DIRECTION('',(-0.,0.,-1.)); +#268346 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#268347 = ORIENTED_EDGE('',*,*,#268348,.F.); +#268348 = EDGE_CURVE('',#268349,#268340,#268351,.T.); +#268349 = VERTEX_POINT('',#268350); +#268350 = CARTESIAN_POINT('',(135.161921,-131.009509,1.51)); +#268351 = LINE('',#268352,#268353); +#268352 = CARTESIAN_POINT('',(135.161921,-131.009509,1.51)); +#268353 = VECTOR('',#268354,1.); +#268354 = DIRECTION('',(0.,0.,1.)); +#268355 = ORIENTED_EDGE('',*,*,#268356,.F.); +#268356 = EDGE_CURVE('',#268317,#268349,#268357,.T.); +#268357 = CIRCLE('',#268358,0.100000456609); +#268358 = AXIS2_PLACEMENT_3D('',#268359,#268360,#268361); +#268359 = CARTESIAN_POINT('',(135.26,-130.99,1.51)); +#268360 = DIRECTION('',(-0.,0.,-1.)); +#268361 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#268362 = CYLINDRICAL_SURFACE('',#268363,0.100000456609); +#268363 = AXIS2_PLACEMENT_3D('',#268364,#268365,#268366); +#268364 = CARTESIAN_POINT('',(135.26,-130.99,1.51)); +#268365 = DIRECTION('',(-0.,0.,-1.)); +#268366 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#268367 = ADVANCED_FACE('',(#268368),#268384,.T.); +#268368 = FACE_BOUND('',#268369,.T.); +#268369 = EDGE_LOOP('',(#268370,#268371,#268377,#268378)); +#268370 = ORIENTED_EDGE('',*,*,#268348,.T.); +#268371 = ORIENTED_EDGE('',*,*,#268372,.T.); +#268372 = EDGE_CURVE('',#268340,#268173,#268373,.T.); +#268373 = LINE('',#268374,#268375); +#268374 = CARTESIAN_POINT('',(135.161921,-131.009509,1.545)); +#268375 = VECTOR('',#268376,1.); +#268376 = DIRECTION('',(0.,1.,0.)); +#268377 = ORIENTED_EDGE('',*,*,#268170,.F.); +#268378 = ORIENTED_EDGE('',*,*,#268379,.F.); +#268379 = EDGE_CURVE('',#268349,#268171,#268380,.T.); +#268380 = LINE('',#268381,#268382); +#268381 = CARTESIAN_POINT('',(135.161921,-131.009509,1.51)); +#268382 = VECTOR('',#268383,1.); +#268383 = DIRECTION('',(0.,1.,0.)); +#268384 = PLANE('',#268385); +#268385 = AXIS2_PLACEMENT_3D('',#268386,#268387,#268388); +#268386 = CARTESIAN_POINT('',(135.161921,-131.009509,1.51)); +#268387 = DIRECTION('',(-1.,0.,0.)); +#268388 = DIRECTION('',(0.,1.,0.)); +#268389 = ADVANCED_FACE('',(#268390),#268399,.F.); +#268390 = FACE_BOUND('',#268391,.T.); +#268391 = EDGE_LOOP('',(#268392,#268393,#268394,#268395,#268396,#268397, + #268398)); +#268392 = ORIENTED_EDGE('',*,*,#268197,.T.); +#268393 = ORIENTED_EDGE('',*,*,#268229,.T.); +#268394 = ORIENTED_EDGE('',*,*,#268261,.T.); +#268395 = ORIENTED_EDGE('',*,*,#268293,.T.); +#268396 = ORIENTED_EDGE('',*,*,#268324,.T.); +#268397 = ORIENTED_EDGE('',*,*,#268356,.T.); +#268398 = ORIENTED_EDGE('',*,*,#268379,.T.); +#268399 = PLANE('',#268400); +#268400 = AXIS2_PLACEMENT_3D('',#268401,#268402,#268403); +#268401 = CARTESIAN_POINT('',(0.,0.,1.51)); +#268402 = DIRECTION('',(0.,0.,1.)); +#268403 = DIRECTION('',(1.,0.,-0.)); +#268404 = ADVANCED_FACE('',(#268405),#268414,.T.); +#268405 = FACE_BOUND('',#268406,.F.); +#268406 = EDGE_LOOP('',(#268407,#268408,#268409,#268410,#268411,#268412, + #268413)); +#268407 = ORIENTED_EDGE('',*,*,#268180,.T.); +#268408 = ORIENTED_EDGE('',*,*,#268213,.T.); +#268409 = ORIENTED_EDGE('',*,*,#268244,.T.); +#268410 = ORIENTED_EDGE('',*,*,#268277,.T.); +#268411 = ORIENTED_EDGE('',*,*,#268308,.T.); +#268412 = ORIENTED_EDGE('',*,*,#268339,.T.); +#268413 = ORIENTED_EDGE('',*,*,#268372,.T.); +#268414 = PLANE('',#268415); +#268415 = AXIS2_PLACEMENT_3D('',#268416,#268417,#268418); +#268416 = CARTESIAN_POINT('',(0.,0.,1.545)); +#268417 = DIRECTION('',(0.,0.,1.)); +#268418 = DIRECTION('',(1.,0.,-0.)); +#268419 = MANIFOLD_SOLID_BREP('',#268420); +#268420 = CLOSED_SHELL('',(#268421,#268461,#268492,#268525,#268556, + #268587,#268620,#268651,#268682,#268715,#268737,#268770,#268791)); +#268421 = ADVANCED_FACE('',(#268422),#268456,.T.); +#268422 = FACE_BOUND('',#268423,.T.); +#268423 = EDGE_LOOP('',(#268424,#268434,#268442,#268450)); +#268424 = ORIENTED_EDGE('',*,*,#268425,.T.); +#268425 = EDGE_CURVE('',#268426,#268428,#268430,.T.); +#268426 = VERTEX_POINT('',#268427); +#268427 = CARTESIAN_POINT('',(136.8195,-146.178078,1.51)); +#268428 = VERTEX_POINT('',#268429); +#268429 = CARTESIAN_POINT('',(136.8195,-146.178078,1.545)); +#268430 = LINE('',#268431,#268432); +#268431 = CARTESIAN_POINT('',(136.8195,-146.178078,1.51)); +#268432 = VECTOR('',#268433,1.); +#268433 = DIRECTION('',(0.,0.,1.)); +#268434 = ORIENTED_EDGE('',*,*,#268435,.T.); +#268435 = EDGE_CURVE('',#268428,#268436,#268438,.T.); +#268436 = VERTEX_POINT('',#268437); +#268437 = CARTESIAN_POINT('',(139.5,-148.858578,1.545)); +#268438 = LINE('',#268439,#268440); +#268439 = CARTESIAN_POINT('',(136.8195,-146.178078,1.545)); +#268440 = VECTOR('',#268441,1.); +#268441 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#268442 = ORIENTED_EDGE('',*,*,#268443,.F.); +#268443 = EDGE_CURVE('',#268444,#268436,#268446,.T.); +#268444 = VERTEX_POINT('',#268445); +#268445 = CARTESIAN_POINT('',(139.5,-148.858578,1.51)); +#268446 = LINE('',#268447,#268448); +#268447 = CARTESIAN_POINT('',(139.5,-148.858578,1.51)); +#268448 = VECTOR('',#268449,1.); +#268449 = DIRECTION('',(0.,0.,1.)); +#268450 = ORIENTED_EDGE('',*,*,#268451,.F.); +#268451 = EDGE_CURVE('',#268426,#268444,#268452,.T.); +#268452 = LINE('',#268453,#268454); +#268453 = CARTESIAN_POINT('',(136.8195,-146.178078,1.51)); +#268454 = VECTOR('',#268455,1.); +#268455 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#268456 = PLANE('',#268457); +#268457 = AXIS2_PLACEMENT_3D('',#268458,#268459,#268460); +#268458 = CARTESIAN_POINT('',(136.8195,-146.178078,1.51)); +#268459 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#268460 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#268461 = ADVANCED_FACE('',(#268462),#268487,.T.); +#268462 = FACE_BOUND('',#268463,.T.); +#268463 = EDGE_LOOP('',(#268464,#268465,#268473,#268481)); +#268464 = ORIENTED_EDGE('',*,*,#268443,.T.); +#268465 = ORIENTED_EDGE('',*,*,#268466,.T.); +#268466 = EDGE_CURVE('',#268436,#268467,#268469,.T.); +#268467 = VERTEX_POINT('',#268468); +#268468 = CARTESIAN_POINT('',(139.501921,-147.780491,1.545)); +#268469 = LINE('',#268470,#268471); +#268470 = CARTESIAN_POINT('',(139.5,-148.858578,1.545)); +#268471 = VECTOR('',#268472,1.); +#268472 = DIRECTION('',(1.781857076846E-03,0.999998412491,0.)); +#268473 = ORIENTED_EDGE('',*,*,#268474,.F.); +#268474 = EDGE_CURVE('',#268475,#268467,#268477,.T.); +#268475 = VERTEX_POINT('',#268476); +#268476 = CARTESIAN_POINT('',(139.501921,-147.780491,1.51)); +#268477 = LINE('',#268478,#268479); +#268478 = CARTESIAN_POINT('',(139.501921,-147.780491,1.51)); +#268479 = VECTOR('',#268480,1.); +#268480 = DIRECTION('',(0.,0.,1.)); +#268481 = ORIENTED_EDGE('',*,*,#268482,.F.); +#268482 = EDGE_CURVE('',#268444,#268475,#268483,.T.); +#268483 = LINE('',#268484,#268485); +#268484 = CARTESIAN_POINT('',(139.5,-148.858578,1.51)); +#268485 = VECTOR('',#268486,1.); +#268486 = DIRECTION('',(1.781857076846E-03,0.999998412491,0.)); +#268487 = PLANE('',#268488); +#268488 = AXIS2_PLACEMENT_3D('',#268489,#268490,#268491); +#268489 = CARTESIAN_POINT('',(139.5,-148.858578,1.51)); +#268490 = DIRECTION('',(-0.999998412491,1.781857076846E-03,0.)); +#268491 = DIRECTION('',(1.781857076846E-03,0.999998412491,0.)); +#268492 = ADVANCED_FACE('',(#268493),#268520,.T.); +#268493 = FACE_BOUND('',#268494,.T.); +#268494 = EDGE_LOOP('',(#268495,#268496,#268505,#268513)); +#268495 = ORIENTED_EDGE('',*,*,#268474,.T.); +#268496 = ORIENTED_EDGE('',*,*,#268497,.T.); +#268497 = EDGE_CURVE('',#268467,#268498,#268500,.T.); +#268498 = VERTEX_POINT('',#268499); +#268499 = CARTESIAN_POINT('',(139.698079,-147.780491,1.545)); +#268500 = CIRCLE('',#268501,0.100000456609); +#268501 = AXIS2_PLACEMENT_3D('',#268502,#268503,#268504); +#268502 = CARTESIAN_POINT('',(139.6,-147.8,1.545)); +#268503 = DIRECTION('',(0.,0.,-1.)); +#268504 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#268505 = ORIENTED_EDGE('',*,*,#268506,.F.); +#268506 = EDGE_CURVE('',#268507,#268498,#268509,.T.); +#268507 = VERTEX_POINT('',#268508); +#268508 = CARTESIAN_POINT('',(139.698079,-147.780491,1.51)); +#268509 = LINE('',#268510,#268511); +#268510 = CARTESIAN_POINT('',(139.698079,-147.780491,1.51)); +#268511 = VECTOR('',#268512,1.); +#268512 = DIRECTION('',(0.,0.,1.)); +#268513 = ORIENTED_EDGE('',*,*,#268514,.F.); +#268514 = EDGE_CURVE('',#268475,#268507,#268515,.T.); +#268515 = CIRCLE('',#268516,0.100000456609); +#268516 = AXIS2_PLACEMENT_3D('',#268517,#268518,#268519); +#268517 = CARTESIAN_POINT('',(139.6,-147.8,1.51)); +#268518 = DIRECTION('',(0.,0.,-1.)); +#268519 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#268520 = CYLINDRICAL_SURFACE('',#268521,0.100000456609); +#268521 = AXIS2_PLACEMENT_3D('',#268522,#268523,#268524); +#268522 = CARTESIAN_POINT('',(139.6,-147.8,1.51)); +#268523 = DIRECTION('',(0.,0.,-1.)); +#268524 = DIRECTION('',(-0.980785521645,0.195089109206,0.)); +#268525 = ADVANCED_FACE('',(#268526),#268551,.T.); +#268526 = FACE_BOUND('',#268527,.T.); +#268527 = EDGE_LOOP('',(#268528,#268529,#268537,#268545)); +#268528 = ORIENTED_EDGE('',*,*,#268506,.T.); +#268529 = ORIENTED_EDGE('',*,*,#268530,.T.); +#268530 = EDGE_CURVE('',#268498,#268531,#268533,.T.); +#268531 = VERTEX_POINT('',#268532); +#268532 = CARTESIAN_POINT('',(139.7,-149.058578,1.545)); +#268533 = LINE('',#268534,#268535); +#268534 = CARTESIAN_POINT('',(139.698079,-147.780491,1.545)); +#268535 = VECTOR('',#268536,1.); +#268536 = DIRECTION('',(1.503025873925E-03,-0.999998870456,0.)); +#268537 = ORIENTED_EDGE('',*,*,#268538,.F.); +#268538 = EDGE_CURVE('',#268539,#268531,#268541,.T.); +#268539 = VERTEX_POINT('',#268540); +#268540 = CARTESIAN_POINT('',(139.7,-149.058578,1.51)); +#268541 = LINE('',#268542,#268543); +#268542 = CARTESIAN_POINT('',(139.7,-149.058578,1.51)); +#268543 = VECTOR('',#268544,1.); +#268544 = DIRECTION('',(0.,0.,1.)); +#268545 = ORIENTED_EDGE('',*,*,#268546,.F.); +#268546 = EDGE_CURVE('',#268507,#268539,#268547,.T.); +#268547 = LINE('',#268548,#268549); +#268548 = CARTESIAN_POINT('',(139.698079,-147.780491,1.51)); +#268549 = VECTOR('',#268550,1.); +#268550 = DIRECTION('',(1.503025873925E-03,-0.999998870456,0.)); +#268551 = PLANE('',#268552); +#268552 = AXIS2_PLACEMENT_3D('',#268553,#268554,#268555); +#268553 = CARTESIAN_POINT('',(139.698079,-147.780491,1.51)); +#268554 = DIRECTION('',(0.999998870456,1.503025873925E-03,-0.)); +#268555 = DIRECTION('',(1.503025873925E-03,-0.999998870456,0.)); +#268556 = ADVANCED_FACE('',(#268557),#268582,.T.); +#268557 = FACE_BOUND('',#268558,.T.); +#268558 = EDGE_LOOP('',(#268559,#268560,#268568,#268576)); +#268559 = ORIENTED_EDGE('',*,*,#268538,.T.); +#268560 = ORIENTED_EDGE('',*,*,#268561,.T.); +#268561 = EDGE_CURVE('',#268531,#268562,#268564,.T.); +#268562 = VERTEX_POINT('',#268563); +#268563 = CARTESIAN_POINT('',(139.764654,-149.123691,1.545)); +#268564 = LINE('',#268565,#268566); +#268565 = CARTESIAN_POINT('',(139.7,-149.058578,1.545)); +#268566 = VECTOR('',#268567,1.); +#268567 = DIRECTION('',(0.704601259887,-0.709603455858,0.)); +#268568 = ORIENTED_EDGE('',*,*,#268569,.F.); +#268569 = EDGE_CURVE('',#268570,#268562,#268572,.T.); +#268570 = VERTEX_POINT('',#268571); +#268571 = CARTESIAN_POINT('',(139.764654,-149.123691,1.51)); +#268572 = LINE('',#268573,#268574); +#268573 = CARTESIAN_POINT('',(139.764654,-149.123691,1.51)); +#268574 = VECTOR('',#268575,1.); +#268575 = DIRECTION('',(0.,0.,1.)); +#268576 = ORIENTED_EDGE('',*,*,#268577,.F.); +#268577 = EDGE_CURVE('',#268539,#268570,#268578,.T.); +#268578 = LINE('',#268579,#268580); +#268579 = CARTESIAN_POINT('',(139.7,-149.058578,1.51)); +#268580 = VECTOR('',#268581,1.); +#268581 = DIRECTION('',(0.704601259887,-0.709603455858,0.)); +#268582 = PLANE('',#268583); +#268583 = AXIS2_PLACEMENT_3D('',#268584,#268585,#268586); +#268584 = CARTESIAN_POINT('',(139.7,-149.058578,1.51)); +#268585 = DIRECTION('',(0.709603455858,0.704601259887,-0.)); +#268586 = DIRECTION('',(0.704601259887,-0.709603455858,0.)); +#268587 = ADVANCED_FACE('',(#268588),#268615,.F.); +#268588 = FACE_BOUND('',#268589,.T.); +#268589 = EDGE_LOOP('',(#268590,#268591,#268600,#268608)); +#268590 = ORIENTED_EDGE('',*,*,#268569,.T.); +#268591 = ORIENTED_EDGE('',*,*,#268592,.T.); +#268592 = EDGE_CURVE('',#268562,#268593,#268595,.T.); +#268593 = VERTEX_POINT('',#268594); +#268594 = CARTESIAN_POINT('',(139.624016,-149.26409,1.545)); +#268595 = CIRCLE('',#268596,0.305869385102); +#268596 = AXIS2_PLACEMENT_3D('',#268597,#268598,#268599); +#268597 = CARTESIAN_POINT('',(139.89871334644,-149.3986167579,1.545)); +#268598 = DIRECTION('',(0.,0.,1.)); +#268599 = DIRECTION('',(-0.43828952152,0.898833853015,0.)); +#268600 = ORIENTED_EDGE('',*,*,#268601,.F.); +#268601 = EDGE_CURVE('',#268602,#268593,#268604,.T.); +#268602 = VERTEX_POINT('',#268603); +#268603 = CARTESIAN_POINT('',(139.624016,-149.26409,1.51)); +#268604 = LINE('',#268605,#268606); +#268605 = CARTESIAN_POINT('',(139.624016,-149.26409,1.51)); +#268606 = VECTOR('',#268607,1.); +#268607 = DIRECTION('',(0.,0.,1.)); +#268608 = ORIENTED_EDGE('',*,*,#268609,.F.); +#268609 = EDGE_CURVE('',#268570,#268602,#268610,.T.); +#268610 = CIRCLE('',#268611,0.305869385102); +#268611 = AXIS2_PLACEMENT_3D('',#268612,#268613,#268614); +#268612 = CARTESIAN_POINT('',(139.89871334644,-149.3986167579,1.51)); +#268613 = DIRECTION('',(0.,0.,1.)); +#268614 = DIRECTION('',(-0.43828952152,0.898833853015,0.)); +#268615 = CYLINDRICAL_SURFACE('',#268616,0.305869385102); +#268616 = AXIS2_PLACEMENT_3D('',#268617,#268618,#268619); +#268617 = CARTESIAN_POINT('',(139.89871334644,-149.3986167579,1.51)); +#268618 = DIRECTION('',(-0.,-0.,-1.)); +#268619 = DIRECTION('',(-0.43828952152,0.898833853015,0.)); +#268620 = ADVANCED_FACE('',(#268621),#268646,.T.); +#268621 = FACE_BOUND('',#268622,.T.); +#268622 = EDGE_LOOP('',(#268623,#268624,#268632,#268640)); +#268623 = ORIENTED_EDGE('',*,*,#268601,.T.); +#268624 = ORIENTED_EDGE('',*,*,#268625,.T.); +#268625 = EDGE_CURVE('',#268593,#268626,#268628,.T.); +#268626 = VERTEX_POINT('',#268627); +#268627 = CARTESIAN_POINT('',(136.678078,-146.3195,1.545)); +#268628 = LINE('',#268629,#268630); +#268629 = CARTESIAN_POINT('',(139.624016,-149.26409,1.545)); +#268630 = VECTOR('',#268631,1.); +#268631 = DIRECTION('',(-0.707268578372,0.706944946971,0.)); +#268632 = ORIENTED_EDGE('',*,*,#268633,.F.); +#268633 = EDGE_CURVE('',#268634,#268626,#268636,.T.); +#268634 = VERTEX_POINT('',#268635); +#268635 = CARTESIAN_POINT('',(136.678078,-146.3195,1.51)); +#268636 = LINE('',#268637,#268638); +#268637 = CARTESIAN_POINT('',(136.678078,-146.3195,1.51)); +#268638 = VECTOR('',#268639,1.); +#268639 = DIRECTION('',(0.,0.,1.)); +#268640 = ORIENTED_EDGE('',*,*,#268641,.F.); +#268641 = EDGE_CURVE('',#268602,#268634,#268642,.T.); +#268642 = LINE('',#268643,#268644); +#268643 = CARTESIAN_POINT('',(139.624016,-149.26409,1.51)); +#268644 = VECTOR('',#268645,1.); +#268645 = DIRECTION('',(-0.707268578372,0.706944946971,0.)); +#268646 = PLANE('',#268647); +#268647 = AXIS2_PLACEMENT_3D('',#268648,#268649,#268650); +#268648 = CARTESIAN_POINT('',(139.624016,-149.26409,1.51)); +#268649 = DIRECTION('',(-0.706944946971,-0.707268578372,0.)); +#268650 = DIRECTION('',(-0.707268578372,0.706944946971,0.)); +#268651 = ADVANCED_FACE('',(#268652),#268677,.T.); +#268652 = FACE_BOUND('',#268653,.T.); +#268653 = EDGE_LOOP('',(#268654,#268655,#268663,#268671)); +#268654 = ORIENTED_EDGE('',*,*,#268633,.T.); +#268655 = ORIENTED_EDGE('',*,*,#268656,.T.); +#268656 = EDGE_CURVE('',#268626,#268657,#268659,.T.); +#268657 = VERTEX_POINT('',#268658); +#268658 = CARTESIAN_POINT('',(136.664805,-146.327164,1.545)); +#268659 = LINE('',#268660,#268661); +#268660 = CARTESIAN_POINT('',(136.678078,-146.3195,1.545)); +#268661 = VECTOR('',#268662,1.); +#268662 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#268663 = ORIENTED_EDGE('',*,*,#268664,.F.); +#268664 = EDGE_CURVE('',#268665,#268657,#268667,.T.); +#268665 = VERTEX_POINT('',#268666); +#268666 = CARTESIAN_POINT('',(136.664805,-146.327164,1.51)); +#268667 = LINE('',#268668,#268669); +#268668 = CARTESIAN_POINT('',(136.664805,-146.327164,1.51)); +#268669 = VECTOR('',#268670,1.); +#268670 = DIRECTION('',(0.,0.,1.)); +#268671 = ORIENTED_EDGE('',*,*,#268672,.F.); +#268672 = EDGE_CURVE('',#268634,#268665,#268673,.T.); +#268673 = LINE('',#268674,#268675); +#268674 = CARTESIAN_POINT('',(136.678078,-146.3195,1.51)); +#268675 = VECTOR('',#268676,1.); +#268676 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#268677 = PLANE('',#268678); +#268678 = AXIS2_PLACEMENT_3D('',#268679,#268680,#268681); +#268679 = CARTESIAN_POINT('',(136.678078,-146.3195,1.51)); +#268680 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#268681 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#268682 = ADVANCED_FACE('',(#268683),#268710,.T.); +#268683 = FACE_BOUND('',#268684,.T.); +#268684 = EDGE_LOOP('',(#268685,#268686,#268695,#268703)); +#268685 = ORIENTED_EDGE('',*,*,#268664,.T.); +#268686 = ORIENTED_EDGE('',*,*,#268687,.T.); +#268687 = EDGE_CURVE('',#268657,#268688,#268690,.T.); +#268688 = VERTEX_POINT('',#268689); +#268689 = CARTESIAN_POINT('',(136.827164,-146.164805,1.545)); +#268690 = CIRCLE('',#268691,0.300000118202); +#268691 = AXIS2_PLACEMENT_3D('',#268692,#268693,#268694); +#268692 = CARTESIAN_POINT('',(136.55,-146.05,1.545)); +#268693 = DIRECTION('',(0.,0.,-1.)); +#268694 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#268695 = ORIENTED_EDGE('',*,*,#268696,.F.); +#268696 = EDGE_CURVE('',#268697,#268688,#268699,.T.); +#268697 = VERTEX_POINT('',#268698); +#268698 = CARTESIAN_POINT('',(136.827164,-146.164805,1.51)); +#268699 = LINE('',#268700,#268701); +#268700 = CARTESIAN_POINT('',(136.827164,-146.164805,1.51)); +#268701 = VECTOR('',#268702,1.); +#268702 = DIRECTION('',(0.,0.,1.)); +#268703 = ORIENTED_EDGE('',*,*,#268704,.F.); +#268704 = EDGE_CURVE('',#268665,#268697,#268705,.T.); +#268705 = CIRCLE('',#268706,0.300000118202); +#268706 = AXIS2_PLACEMENT_3D('',#268707,#268708,#268709); +#268707 = CARTESIAN_POINT('',(136.55,-146.05,1.51)); +#268708 = DIRECTION('',(0.,0.,-1.)); +#268709 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#268710 = CYLINDRICAL_SURFACE('',#268711,0.300000118202); +#268711 = AXIS2_PLACEMENT_3D('',#268712,#268713,#268714); +#268712 = CARTESIAN_POINT('',(136.55,-146.05,1.51)); +#268713 = DIRECTION('',(0.,0.,-1.)); +#268714 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#268715 = ADVANCED_FACE('',(#268716),#268732,.T.); +#268716 = FACE_BOUND('',#268717,.T.); +#268717 = EDGE_LOOP('',(#268718,#268719,#268725,#268726)); +#268718 = ORIENTED_EDGE('',*,*,#268696,.T.); +#268719 = ORIENTED_EDGE('',*,*,#268720,.T.); +#268720 = EDGE_CURVE('',#268688,#268428,#268721,.T.); +#268721 = LINE('',#268722,#268723); +#268722 = CARTESIAN_POINT('',(136.827164,-146.164805,1.545)); +#268723 = VECTOR('',#268724,1.); +#268724 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#268725 = ORIENTED_EDGE('',*,*,#268425,.F.); +#268726 = ORIENTED_EDGE('',*,*,#268727,.F.); +#268727 = EDGE_CURVE('',#268697,#268426,#268728,.T.); +#268728 = LINE('',#268729,#268730); +#268729 = CARTESIAN_POINT('',(136.827164,-146.164805,1.51)); +#268730 = VECTOR('',#268731,1.); +#268731 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#268732 = PLANE('',#268733); +#268733 = AXIS2_PLACEMENT_3D('',#268734,#268735,#268736); +#268734 = CARTESIAN_POINT('',(136.827164,-146.164805,1.51)); +#268735 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#268736 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#268737 = ADVANCED_FACE('',(#268738),#268765,.F.); +#268738 = FACE_BOUND('',#268739,.T.); +#268739 = EDGE_LOOP('',(#268740,#268750,#268757,#268758)); +#268740 = ORIENTED_EDGE('',*,*,#268741,.T.); +#268741 = EDGE_CURVE('',#268742,#268744,#268746,.T.); +#268742 = VERTEX_POINT('',#268743); +#268743 = CARTESIAN_POINT('',(136.687255,-146.05,1.51)); +#268744 = VERTEX_POINT('',#268745); +#268745 = CARTESIAN_POINT('',(136.687255,-146.05,1.545)); +#268746 = LINE('',#268747,#268748); +#268747 = CARTESIAN_POINT('',(136.687255,-146.05,1.51)); +#268748 = VECTOR('',#268749,1.); +#268749 = DIRECTION('',(0.,0.,1.)); +#268750 = ORIENTED_EDGE('',*,*,#268751,.T.); +#268751 = EDGE_CURVE('',#268744,#268744,#268752,.T.); +#268752 = CIRCLE('',#268753,0.137255); +#268753 = AXIS2_PLACEMENT_3D('',#268754,#268755,#268756); +#268754 = CARTESIAN_POINT('',(136.55,-146.05,1.545)); +#268755 = DIRECTION('',(0.,0.,1.)); +#268756 = DIRECTION('',(1.,0.,-0.)); +#268757 = ORIENTED_EDGE('',*,*,#268741,.F.); +#268758 = ORIENTED_EDGE('',*,*,#268759,.F.); +#268759 = EDGE_CURVE('',#268742,#268742,#268760,.T.); +#268760 = CIRCLE('',#268761,0.137255); +#268761 = AXIS2_PLACEMENT_3D('',#268762,#268763,#268764); +#268762 = CARTESIAN_POINT('',(136.55,-146.05,1.51)); +#268763 = DIRECTION('',(0.,0.,1.)); +#268764 = DIRECTION('',(1.,0.,-0.)); +#268765 = CYLINDRICAL_SURFACE('',#268766,0.137255); +#268766 = AXIS2_PLACEMENT_3D('',#268767,#268768,#268769); +#268767 = CARTESIAN_POINT('',(136.55,-146.05,1.51)); +#268768 = DIRECTION('',(-0.,-0.,-1.)); +#268769 = DIRECTION('',(1.,0.,-0.)); +#268770 = ADVANCED_FACE('',(#268771,#268783),#268786,.F.); +#268771 = FACE_BOUND('',#268772,.T.); +#268772 = EDGE_LOOP('',(#268773,#268774,#268775,#268776,#268777,#268778, + #268779,#268780,#268781,#268782)); +#268773 = ORIENTED_EDGE('',*,*,#268451,.T.); +#268774 = ORIENTED_EDGE('',*,*,#268482,.T.); +#268775 = ORIENTED_EDGE('',*,*,#268514,.T.); +#268776 = ORIENTED_EDGE('',*,*,#268546,.T.); +#268777 = ORIENTED_EDGE('',*,*,#268577,.T.); +#268778 = ORIENTED_EDGE('',*,*,#268609,.T.); +#268779 = ORIENTED_EDGE('',*,*,#268641,.T.); +#268780 = ORIENTED_EDGE('',*,*,#268672,.T.); +#268781 = ORIENTED_EDGE('',*,*,#268704,.T.); +#268782 = ORIENTED_EDGE('',*,*,#268727,.T.); +#268783 = FACE_BOUND('',#268784,.T.); +#268784 = EDGE_LOOP('',(#268785)); +#268785 = ORIENTED_EDGE('',*,*,#268759,.T.); +#268786 = PLANE('',#268787); +#268787 = AXIS2_PLACEMENT_3D('',#268788,#268789,#268790); +#268788 = CARTESIAN_POINT('',(0.,0.,1.51)); +#268789 = DIRECTION('',(0.,0.,1.)); +#268790 = DIRECTION('',(1.,0.,-0.)); +#268791 = ADVANCED_FACE('',(#268792,#268804),#268807,.T.); +#268792 = FACE_BOUND('',#268793,.F.); +#268793 = EDGE_LOOP('',(#268794,#268795,#268796,#268797,#268798,#268799, + #268800,#268801,#268802,#268803)); +#268794 = ORIENTED_EDGE('',*,*,#268435,.T.); +#268795 = ORIENTED_EDGE('',*,*,#268466,.T.); +#268796 = ORIENTED_EDGE('',*,*,#268497,.T.); +#268797 = ORIENTED_EDGE('',*,*,#268530,.T.); +#268798 = ORIENTED_EDGE('',*,*,#268561,.T.); +#268799 = ORIENTED_EDGE('',*,*,#268592,.T.); +#268800 = ORIENTED_EDGE('',*,*,#268625,.T.); +#268801 = ORIENTED_EDGE('',*,*,#268656,.T.); +#268802 = ORIENTED_EDGE('',*,*,#268687,.T.); +#268803 = ORIENTED_EDGE('',*,*,#268720,.T.); +#268804 = FACE_BOUND('',#268805,.F.); +#268805 = EDGE_LOOP('',(#268806)); +#268806 = ORIENTED_EDGE('',*,*,#268751,.T.); +#268807 = PLANE('',#268808); +#268808 = AXIS2_PLACEMENT_3D('',#268809,#268810,#268811); +#268809 = CARTESIAN_POINT('',(0.,0.,1.545)); +#268810 = DIRECTION('',(0.,0.,1.)); +#268811 = DIRECTION('',(1.,0.,-0.)); +#268812 = MANIFOLD_SOLID_BREP('',#268813); +#268813 = CLOSED_SHELL('',(#268814,#268854,#268885,#268916,#268947, + #268978,#269009,#269040,#269071,#269102,#269133,#269166,#269197, + #269228,#269259,#269290,#269321,#269352,#269383,#269414,#269445, + #269478,#269500,#269533,#269566,#269602)); +#268814 = ADVANCED_FACE('',(#268815),#268849,.T.); +#268815 = FACE_BOUND('',#268816,.T.); +#268816 = EDGE_LOOP('',(#268817,#268827,#268835,#268843)); +#268817 = ORIENTED_EDGE('',*,*,#268818,.T.); +#268818 = EDGE_CURVE('',#268819,#268821,#268823,.T.); +#268819 = VERTEX_POINT('',#268820); +#268820 = CARTESIAN_POINT('',(128.843765,-102.702343,1.51)); +#268821 = VERTEX_POINT('',#268822); +#268822 = CARTESIAN_POINT('',(128.843765,-102.702343,1.545)); +#268823 = LINE('',#268824,#268825); +#268824 = CARTESIAN_POINT('',(128.843765,-102.702343,1.51)); +#268825 = VECTOR('',#268826,1.); +#268826 = DIRECTION('',(0.,0.,1.)); +#268827 = ORIENTED_EDGE('',*,*,#268828,.T.); +#268828 = EDGE_CURVE('',#268821,#268829,#268831,.T.); +#268829 = VERTEX_POINT('',#268830); +#268830 = CARTESIAN_POINT('',(131.983148,-105.844443,1.545)); +#268831 = LINE('',#268832,#268833); +#268832 = CARTESIAN_POINT('',(128.843765,-102.702343,1.545)); +#268833 = VECTOR('',#268834,1.); +#268834 = DIRECTION('',(0.706800862274,-0.707412567805,0.)); +#268835 = ORIENTED_EDGE('',*,*,#268836,.F.); +#268836 = EDGE_CURVE('',#268837,#268829,#268839,.T.); +#268837 = VERTEX_POINT('',#268838); +#268838 = CARTESIAN_POINT('',(131.983148,-105.844443,1.51)); +#268839 = LINE('',#268840,#268841); +#268840 = CARTESIAN_POINT('',(131.983148,-105.844443,1.51)); +#268841 = VECTOR('',#268842,1.); +#268842 = DIRECTION('',(0.,0.,1.)); +#268843 = ORIENTED_EDGE('',*,*,#268844,.F.); +#268844 = EDGE_CURVE('',#268819,#268837,#268845,.T.); +#268845 = LINE('',#268846,#268847); +#268846 = CARTESIAN_POINT('',(128.843765,-102.702343,1.51)); +#268847 = VECTOR('',#268848,1.); +#268848 = DIRECTION('',(0.706800862274,-0.707412567805,0.)); +#268849 = PLANE('',#268850); +#268850 = AXIS2_PLACEMENT_3D('',#268851,#268852,#268853); +#268851 = CARTESIAN_POINT('',(128.843765,-102.702343,1.51)); +#268852 = DIRECTION('',(0.707412567805,0.706800862274,-0.)); +#268853 = DIRECTION('',(0.706800862274,-0.707412567805,0.)); +#268854 = ADVANCED_FACE('',(#268855),#268880,.T.); +#268855 = FACE_BOUND('',#268856,.T.); +#268856 = EDGE_LOOP('',(#268857,#268858,#268866,#268874)); +#268857 = ORIENTED_EDGE('',*,*,#268836,.T.); +#268858 = ORIENTED_EDGE('',*,*,#268859,.T.); +#268859 = EDGE_CURVE('',#268829,#268860,#268862,.T.); +#268860 = VERTEX_POINT('',#268861); +#268861 = CARTESIAN_POINT('',(131.998079,-105.880491,1.545)); +#268862 = LINE('',#268863,#268864); +#268863 = CARTESIAN_POINT('',(131.983148,-105.844443,1.545)); +#268864 = VECTOR('',#268865,1.); +#268865 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#268866 = ORIENTED_EDGE('',*,*,#268867,.F.); +#268867 = EDGE_CURVE('',#268868,#268860,#268870,.T.); +#268868 = VERTEX_POINT('',#268869); +#268869 = CARTESIAN_POINT('',(131.998079,-105.880491,1.51)); +#268870 = LINE('',#268871,#268872); +#268871 = CARTESIAN_POINT('',(131.998079,-105.880491,1.51)); +#268872 = VECTOR('',#268873,1.); +#268873 = DIRECTION('',(0.,0.,1.)); +#268874 = ORIENTED_EDGE('',*,*,#268875,.F.); +#268875 = EDGE_CURVE('',#268837,#268868,#268876,.T.); +#268876 = LINE('',#268877,#268878); +#268877 = CARTESIAN_POINT('',(131.983148,-105.844443,1.51)); +#268878 = VECTOR('',#268879,1.); +#268879 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#268880 = PLANE('',#268881); +#268881 = AXIS2_PLACEMENT_3D('',#268882,#268883,#268884); +#268882 = CARTESIAN_POINT('',(131.983148,-105.844443,1.51)); +#268883 = DIRECTION('',(0.923884701879,0.382670952168,-0.)); +#268884 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#268885 = ADVANCED_FACE('',(#268886),#268911,.T.); +#268886 = FACE_BOUND('',#268887,.T.); +#268887 = EDGE_LOOP('',(#268888,#268889,#268897,#268905)); +#268888 = ORIENTED_EDGE('',*,*,#268867,.T.); +#268889 = ORIENTED_EDGE('',*,*,#268890,.T.); +#268890 = EDGE_CURVE('',#268860,#268891,#268893,.T.); +#268891 = VERTEX_POINT('',#268892); +#268892 = CARTESIAN_POINT('',(131.998079,-123.919509,1.545)); +#268893 = LINE('',#268894,#268895); +#268894 = CARTESIAN_POINT('',(131.998079,-105.880491,1.545)); +#268895 = VECTOR('',#268896,1.); +#268896 = DIRECTION('',(0.,-1.,0.)); +#268897 = ORIENTED_EDGE('',*,*,#268898,.F.); +#268898 = EDGE_CURVE('',#268899,#268891,#268901,.T.); +#268899 = VERTEX_POINT('',#268900); +#268900 = CARTESIAN_POINT('',(131.998079,-123.919509,1.51)); +#268901 = LINE('',#268902,#268903); +#268902 = CARTESIAN_POINT('',(131.998079,-123.919509,1.51)); +#268903 = VECTOR('',#268904,1.); +#268904 = DIRECTION('',(0.,0.,1.)); +#268905 = ORIENTED_EDGE('',*,*,#268906,.F.); +#268906 = EDGE_CURVE('',#268868,#268899,#268907,.T.); +#268907 = LINE('',#268908,#268909); +#268908 = CARTESIAN_POINT('',(131.998079,-105.880491,1.51)); +#268909 = VECTOR('',#268910,1.); +#268910 = DIRECTION('',(0.,-1.,0.)); +#268911 = PLANE('',#268912); +#268912 = AXIS2_PLACEMENT_3D('',#268913,#268914,#268915); +#268913 = CARTESIAN_POINT('',(131.998079,-105.880491,1.51)); +#268914 = DIRECTION('',(1.,0.,-0.)); +#268915 = DIRECTION('',(0.,-1.,0.)); +#268916 = ADVANCED_FACE('',(#268917),#268942,.T.); +#268917 = FACE_BOUND('',#268918,.T.); +#268918 = EDGE_LOOP('',(#268919,#268920,#268928,#268936)); +#268919 = ORIENTED_EDGE('',*,*,#268898,.T.); +#268920 = ORIENTED_EDGE('',*,*,#268921,.T.); +#268921 = EDGE_CURVE('',#268891,#268922,#268924,.T.); +#268922 = VERTEX_POINT('',#268923); +#268923 = CARTESIAN_POINT('',(131.983147,-123.955557,1.545)); +#268924 = LINE('',#268925,#268926); +#268925 = CARTESIAN_POINT('',(131.998079,-123.919509,1.545)); +#268926 = VECTOR('',#268927,1.); +#268927 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#268928 = ORIENTED_EDGE('',*,*,#268929,.F.); +#268929 = EDGE_CURVE('',#268930,#268922,#268932,.T.); +#268930 = VERTEX_POINT('',#268931); +#268931 = CARTESIAN_POINT('',(131.983147,-123.955557,1.51)); +#268932 = LINE('',#268933,#268934); +#268933 = CARTESIAN_POINT('',(131.983147,-123.955557,1.51)); +#268934 = VECTOR('',#268935,1.); +#268935 = DIRECTION('',(0.,0.,1.)); +#268936 = ORIENTED_EDGE('',*,*,#268937,.F.); +#268937 = EDGE_CURVE('',#268899,#268930,#268938,.T.); +#268938 = LINE('',#268939,#268940); +#268939 = CARTESIAN_POINT('',(131.998079,-123.919509,1.51)); +#268940 = VECTOR('',#268941,1.); +#268941 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#268942 = PLANE('',#268943); +#268943 = AXIS2_PLACEMENT_3D('',#268944,#268945,#268946); +#268944 = CARTESIAN_POINT('',(131.998079,-123.919509,1.51)); +#268945 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#268946 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#268947 = ADVANCED_FACE('',(#268948),#268973,.T.); +#268948 = FACE_BOUND('',#268949,.T.); +#268949 = EDGE_LOOP('',(#268950,#268951,#268959,#268967)); +#268950 = ORIENTED_EDGE('',*,*,#268929,.T.); +#268951 = ORIENTED_EDGE('',*,*,#268952,.T.); +#268952 = EDGE_CURVE('',#268922,#268953,#268955,.T.); +#268953 = VERTEX_POINT('',#268954); +#268954 = CARTESIAN_POINT('',(130.705557,-125.233147,1.545)); +#268955 = LINE('',#268956,#268957); +#268956 = CARTESIAN_POINT('',(131.983147,-123.955557,1.545)); +#268957 = VECTOR('',#268958,1.); +#268958 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#268959 = ORIENTED_EDGE('',*,*,#268960,.F.); +#268960 = EDGE_CURVE('',#268961,#268953,#268963,.T.); +#268961 = VERTEX_POINT('',#268962); +#268962 = CARTESIAN_POINT('',(130.705557,-125.233147,1.51)); +#268963 = LINE('',#268964,#268965); +#268964 = CARTESIAN_POINT('',(130.705557,-125.233147,1.51)); +#268965 = VECTOR('',#268966,1.); +#268966 = DIRECTION('',(0.,0.,1.)); +#268967 = ORIENTED_EDGE('',*,*,#268968,.F.); +#268968 = EDGE_CURVE('',#268930,#268961,#268969,.T.); +#268969 = LINE('',#268970,#268971); +#268970 = CARTESIAN_POINT('',(131.983147,-123.955557,1.51)); +#268971 = VECTOR('',#268972,1.); +#268972 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#268973 = PLANE('',#268974); +#268974 = AXIS2_PLACEMENT_3D('',#268975,#268976,#268977); +#268975 = CARTESIAN_POINT('',(131.983147,-123.955557,1.51)); +#268976 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#268977 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#268978 = ADVANCED_FACE('',(#268979),#269004,.T.); +#268979 = FACE_BOUND('',#268980,.T.); +#268980 = EDGE_LOOP('',(#268981,#268982,#268990,#268998)); +#268981 = ORIENTED_EDGE('',*,*,#268960,.T.); +#268982 = ORIENTED_EDGE('',*,*,#268983,.T.); +#268983 = EDGE_CURVE('',#268953,#268984,#268986,.T.); +#268984 = VERTEX_POINT('',#268985); +#268985 = CARTESIAN_POINT('',(130.669509,-125.248079,1.545)); +#268986 = LINE('',#268987,#268988); +#268987 = CARTESIAN_POINT('',(130.705557,-125.233147,1.545)); +#268988 = VECTOR('',#268989,1.); +#268989 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#268990 = ORIENTED_EDGE('',*,*,#268991,.F.); +#268991 = EDGE_CURVE('',#268992,#268984,#268994,.T.); +#268992 = VERTEX_POINT('',#268993); +#268993 = CARTESIAN_POINT('',(130.669509,-125.248079,1.51)); +#268994 = LINE('',#268995,#268996); +#268995 = CARTESIAN_POINT('',(130.669509,-125.248079,1.51)); +#268996 = VECTOR('',#268997,1.); +#268997 = DIRECTION('',(0.,0.,1.)); +#268998 = ORIENTED_EDGE('',*,*,#268999,.F.); +#268999 = EDGE_CURVE('',#268961,#268992,#269000,.T.); +#269000 = LINE('',#269001,#269002); +#269001 = CARTESIAN_POINT('',(130.705557,-125.233147,1.51)); +#269002 = VECTOR('',#269003,1.); +#269003 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#269004 = PLANE('',#269005); +#269005 = AXIS2_PLACEMENT_3D('',#269006,#269007,#269008); +#269006 = CARTESIAN_POINT('',(130.705557,-125.233147,1.51)); +#269007 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#269008 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#269009 = ADVANCED_FACE('',(#269010),#269035,.T.); +#269010 = FACE_BOUND('',#269011,.T.); +#269011 = EDGE_LOOP('',(#269012,#269013,#269021,#269029)); +#269012 = ORIENTED_EDGE('',*,*,#268991,.T.); +#269013 = ORIENTED_EDGE('',*,*,#269014,.T.); +#269014 = EDGE_CURVE('',#268984,#269015,#269017,.T.); +#269015 = VERTEX_POINT('',#269016); +#269016 = CARTESIAN_POINT('',(124.955287,-125.25,1.545)); +#269017 = LINE('',#269018,#269019); +#269018 = CARTESIAN_POINT('',(130.669509,-125.248079,1.545)); +#269019 = VECTOR('',#269020,1.); +#269020 = DIRECTION('',(-0.999999943492,-3.361787293955E-04,0.)); +#269021 = ORIENTED_EDGE('',*,*,#269022,.F.); +#269022 = EDGE_CURVE('',#269023,#269015,#269025,.T.); +#269023 = VERTEX_POINT('',#269024); +#269024 = CARTESIAN_POINT('',(124.955287,-125.25,1.51)); +#269025 = LINE('',#269026,#269027); +#269026 = CARTESIAN_POINT('',(124.955287,-125.25,1.51)); +#269027 = VECTOR('',#269028,1.); +#269028 = DIRECTION('',(0.,0.,1.)); +#269029 = ORIENTED_EDGE('',*,*,#269030,.F.); +#269030 = EDGE_CURVE('',#268992,#269023,#269031,.T.); +#269031 = LINE('',#269032,#269033); +#269032 = CARTESIAN_POINT('',(130.669509,-125.248079,1.51)); +#269033 = VECTOR('',#269034,1.); +#269034 = DIRECTION('',(-0.999999943492,-3.361787293955E-04,0.)); +#269035 = PLANE('',#269036); +#269036 = AXIS2_PLACEMENT_3D('',#269037,#269038,#269039); +#269037 = CARTESIAN_POINT('',(130.669509,-125.248079,1.51)); +#269038 = DIRECTION('',(3.361787293955E-04,-0.999999943492,0.)); +#269039 = DIRECTION('',(-0.999999943492,-3.361787293955E-04,0.)); +#269040 = ADVANCED_FACE('',(#269041),#269066,.T.); +#269041 = FACE_BOUND('',#269042,.T.); +#269042 = EDGE_LOOP('',(#269043,#269044,#269052,#269060)); +#269043 = ORIENTED_EDGE('',*,*,#269022,.T.); +#269044 = ORIENTED_EDGE('',*,*,#269045,.T.); +#269045 = EDGE_CURVE('',#269015,#269046,#269048,.T.); +#269046 = VERTEX_POINT('',#269047); +#269047 = CARTESIAN_POINT('',(123.0845,-127.120787,1.545)); +#269048 = LINE('',#269049,#269050); +#269049 = CARTESIAN_POINT('',(124.955287,-125.25,1.545)); +#269050 = VECTOR('',#269051,1.); +#269051 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#269052 = ORIENTED_EDGE('',*,*,#269053,.F.); +#269053 = EDGE_CURVE('',#269054,#269046,#269056,.T.); +#269054 = VERTEX_POINT('',#269055); +#269055 = CARTESIAN_POINT('',(123.0845,-127.120787,1.51)); +#269056 = LINE('',#269057,#269058); +#269057 = CARTESIAN_POINT('',(123.0845,-127.120787,1.51)); +#269058 = VECTOR('',#269059,1.); +#269059 = DIRECTION('',(0.,0.,1.)); +#269060 = ORIENTED_EDGE('',*,*,#269061,.F.); +#269061 = EDGE_CURVE('',#269023,#269054,#269062,.T.); +#269062 = LINE('',#269063,#269064); +#269063 = CARTESIAN_POINT('',(124.955287,-125.25,1.51)); +#269064 = VECTOR('',#269065,1.); +#269065 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#269066 = PLANE('',#269067); +#269067 = AXIS2_PLACEMENT_3D('',#269068,#269069,#269070); +#269068 = CARTESIAN_POINT('',(124.955287,-125.25,1.51)); +#269069 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#269070 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#269071 = ADVANCED_FACE('',(#269072),#269097,.T.); +#269072 = FACE_BOUND('',#269073,.T.); +#269073 = EDGE_LOOP('',(#269074,#269075,#269083,#269091)); +#269074 = ORIENTED_EDGE('',*,*,#269053,.T.); +#269075 = ORIENTED_EDGE('',*,*,#269076,.T.); +#269076 = EDGE_CURVE('',#269046,#269077,#269079,.T.); +#269077 = VERTEX_POINT('',#269078); +#269078 = CARTESIAN_POINT('',(123.0845,-132.203369,1.545)); +#269079 = LINE('',#269080,#269081); +#269080 = CARTESIAN_POINT('',(123.0845,-127.120787,1.545)); +#269081 = VECTOR('',#269082,1.); +#269082 = DIRECTION('',(0.,-1.,0.)); +#269083 = ORIENTED_EDGE('',*,*,#269084,.F.); +#269084 = EDGE_CURVE('',#269085,#269077,#269087,.T.); +#269085 = VERTEX_POINT('',#269086); +#269086 = CARTESIAN_POINT('',(123.0845,-132.203369,1.51)); +#269087 = LINE('',#269088,#269089); +#269088 = CARTESIAN_POINT('',(123.0845,-132.203369,1.51)); +#269089 = VECTOR('',#269090,1.); +#269090 = DIRECTION('',(0.,0.,1.)); +#269091 = ORIENTED_EDGE('',*,*,#269092,.F.); +#269092 = EDGE_CURVE('',#269054,#269085,#269093,.T.); +#269093 = LINE('',#269094,#269095); +#269094 = CARTESIAN_POINT('',(123.0845,-127.120787,1.51)); +#269095 = VECTOR('',#269096,1.); +#269096 = DIRECTION('',(0.,-1.,0.)); +#269097 = PLANE('',#269098); +#269098 = AXIS2_PLACEMENT_3D('',#269099,#269100,#269101); +#269099 = CARTESIAN_POINT('',(123.0845,-127.120787,1.51)); +#269100 = DIRECTION('',(1.,0.,-0.)); +#269101 = DIRECTION('',(0.,-1.,0.)); +#269102 = ADVANCED_FACE('',(#269103),#269128,.T.); +#269103 = FACE_BOUND('',#269104,.T.); +#269104 = EDGE_LOOP('',(#269105,#269106,#269114,#269122)); +#269105 = ORIENTED_EDGE('',*,*,#269084,.T.); +#269106 = ORIENTED_EDGE('',*,*,#269107,.T.); +#269107 = EDGE_CURVE('',#269077,#269108,#269110,.T.); +#269108 = VERTEX_POINT('',#269109); +#269109 = CARTESIAN_POINT('',(123.145342,-132.187067,1.545)); +#269110 = LINE('',#269111,#269112); +#269111 = CARTESIAN_POINT('',(123.0845,-132.203369,1.545)); +#269112 = VECTOR('',#269113,1.); +#269113 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#269114 = ORIENTED_EDGE('',*,*,#269115,.F.); +#269115 = EDGE_CURVE('',#269116,#269108,#269118,.T.); +#269116 = VERTEX_POINT('',#269117); +#269117 = CARTESIAN_POINT('',(123.145342,-132.187067,1.51)); +#269118 = LINE('',#269119,#269120); +#269119 = CARTESIAN_POINT('',(123.145342,-132.187067,1.51)); +#269120 = VECTOR('',#269121,1.); +#269121 = DIRECTION('',(0.,0.,1.)); +#269122 = ORIENTED_EDGE('',*,*,#269123,.F.); +#269123 = EDGE_CURVE('',#269085,#269116,#269124,.T.); +#269124 = LINE('',#269125,#269126); +#269125 = CARTESIAN_POINT('',(123.0845,-132.203369,1.51)); +#269126 = VECTOR('',#269127,1.); +#269127 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#269128 = PLANE('',#269129); +#269129 = AXIS2_PLACEMENT_3D('',#269130,#269131,#269132); +#269130 = CARTESIAN_POINT('',(123.0845,-132.203369,1.51)); +#269131 = DIRECTION('',(-0.258810679488,0.96592806781,0.)); +#269132 = DIRECTION('',(0.96592806781,0.258810679488,0.)); +#269133 = ADVANCED_FACE('',(#269134),#269161,.T.); +#269134 = FACE_BOUND('',#269135,.T.); +#269135 = EDGE_LOOP('',(#269136,#269137,#269146,#269154)); +#269136 = ORIENTED_EDGE('',*,*,#269115,.T.); +#269137 = ORIENTED_EDGE('',*,*,#269138,.T.); +#269138 = EDGE_CURVE('',#269108,#269139,#269141,.T.); +#269139 = VERTEX_POINT('',#269140); +#269140 = CARTESIAN_POINT('',(122.887067,-132.523658,1.545)); +#269141 = CIRCLE('',#269142,0.299999635862); +#269142 = AXIS2_PLACEMENT_3D('',#269143,#269144,#269145); +#269143 = CARTESIAN_POINT('',(123.18450008052,-132.4845000617,1.545)); +#269144 = DIRECTION('',(-0.,0.,-1.)); +#269145 = DIRECTION('',(-0.130527093529,0.991444742714,0.)); +#269146 = ORIENTED_EDGE('',*,*,#269147,.F.); +#269147 = EDGE_CURVE('',#269148,#269139,#269150,.T.); +#269148 = VERTEX_POINT('',#269149); +#269149 = CARTESIAN_POINT('',(122.887067,-132.523658,1.51)); +#269150 = LINE('',#269151,#269152); +#269151 = CARTESIAN_POINT('',(122.887067,-132.523658,1.51)); +#269152 = VECTOR('',#269153,1.); +#269153 = DIRECTION('',(0.,0.,1.)); +#269154 = ORIENTED_EDGE('',*,*,#269155,.F.); +#269155 = EDGE_CURVE('',#269116,#269148,#269156,.T.); +#269156 = CIRCLE('',#269157,0.299999635862); +#269157 = AXIS2_PLACEMENT_3D('',#269158,#269159,#269160); +#269158 = CARTESIAN_POINT('',(123.18450008052,-132.4845000617,1.51)); +#269159 = DIRECTION('',(-0.,0.,-1.)); +#269160 = DIRECTION('',(-0.130527093529,0.991444742714,0.)); +#269161 = CYLINDRICAL_SURFACE('',#269162,0.299999635862); +#269162 = AXIS2_PLACEMENT_3D('',#269163,#269164,#269165); +#269163 = CARTESIAN_POINT('',(123.18450008052,-132.4845000617,1.51)); +#269164 = DIRECTION('',(-0.,0.,-1.)); +#269165 = DIRECTION('',(-0.130527093529,0.991444742714,0.)); +#269166 = ADVANCED_FACE('',(#269167),#269192,.T.); +#269167 = FACE_BOUND('',#269168,.T.); +#269168 = EDGE_LOOP('',(#269169,#269170,#269178,#269186)); +#269169 = ORIENTED_EDGE('',*,*,#269147,.T.); +#269170 = ORIENTED_EDGE('',*,*,#269171,.T.); +#269171 = EDGE_CURVE('',#269139,#269172,#269174,.T.); +#269172 = VERTEX_POINT('',#269173); +#269173 = CARTESIAN_POINT('',(122.886421,-127.059857,1.545)); +#269174 = LINE('',#269175,#269176); +#269175 = CARTESIAN_POINT('',(122.887067,-132.523658,1.545)); +#269176 = VECTOR('',#269177,1.); +#269177 = DIRECTION('',(-1.182327093333E-04,0.999999993011,0.)); +#269178 = ORIENTED_EDGE('',*,*,#269179,.F.); +#269179 = EDGE_CURVE('',#269180,#269172,#269182,.T.); +#269180 = VERTEX_POINT('',#269181); +#269181 = CARTESIAN_POINT('',(122.886421,-127.059857,1.51)); +#269182 = LINE('',#269183,#269184); +#269183 = CARTESIAN_POINT('',(122.886421,-127.059857,1.51)); +#269184 = VECTOR('',#269185,1.); +#269185 = DIRECTION('',(0.,0.,1.)); +#269186 = ORIENTED_EDGE('',*,*,#269187,.F.); +#269187 = EDGE_CURVE('',#269148,#269180,#269188,.T.); +#269188 = LINE('',#269189,#269190); +#269189 = CARTESIAN_POINT('',(122.887067,-132.523658,1.51)); +#269190 = VECTOR('',#269191,1.); +#269191 = DIRECTION('',(-1.182327093333E-04,0.999999993011,0.)); +#269192 = PLANE('',#269193); +#269193 = AXIS2_PLACEMENT_3D('',#269194,#269195,#269196); +#269194 = CARTESIAN_POINT('',(122.887067,-132.523658,1.51)); +#269195 = DIRECTION('',(-0.999999993011,-1.182327093333E-04,0.)); +#269196 = DIRECTION('',(-1.182327093333E-04,0.999999993011,0.)); +#269197 = ADVANCED_FACE('',(#269198),#269223,.T.); +#269198 = FACE_BOUND('',#269199,.T.); +#269199 = EDGE_LOOP('',(#269200,#269201,#269209,#269217)); +#269200 = ORIENTED_EDGE('',*,*,#269179,.T.); +#269201 = ORIENTED_EDGE('',*,*,#269202,.T.); +#269202 = EDGE_CURVE('',#269172,#269203,#269205,.T.); +#269203 = VERTEX_POINT('',#269204); +#269204 = CARTESIAN_POINT('',(122.901353,-127.023809,1.545)); +#269205 = LINE('',#269206,#269207); +#269206 = CARTESIAN_POINT('',(122.886421,-127.059857,1.545)); +#269207 = VECTOR('',#269208,1.); +#269208 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#269209 = ORIENTED_EDGE('',*,*,#269210,.F.); +#269210 = EDGE_CURVE('',#269211,#269203,#269213,.T.); +#269211 = VERTEX_POINT('',#269212); +#269212 = CARTESIAN_POINT('',(122.901353,-127.023809,1.51)); +#269213 = LINE('',#269214,#269215); +#269214 = CARTESIAN_POINT('',(122.901353,-127.023809,1.51)); +#269215 = VECTOR('',#269216,1.); +#269216 = DIRECTION('',(0.,0.,1.)); +#269217 = ORIENTED_EDGE('',*,*,#269218,.F.); +#269218 = EDGE_CURVE('',#269180,#269211,#269219,.T.); +#269219 = LINE('',#269220,#269221); +#269220 = CARTESIAN_POINT('',(122.886421,-127.059857,1.51)); +#269221 = VECTOR('',#269222,1.); +#269222 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#269223 = PLANE('',#269224); +#269224 = AXIS2_PLACEMENT_3D('',#269225,#269226,#269227); +#269225 = CARTESIAN_POINT('',(122.886421,-127.059857,1.51)); +#269226 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#269227 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#269228 = ADVANCED_FACE('',(#269229),#269254,.T.); +#269229 = FACE_BOUND('',#269230,.T.); +#269230 = EDGE_LOOP('',(#269231,#269232,#269240,#269248)); +#269231 = ORIENTED_EDGE('',*,*,#269210,.T.); +#269232 = ORIENTED_EDGE('',*,*,#269233,.T.); +#269233 = EDGE_CURVE('',#269203,#269234,#269236,.T.); +#269234 = VERTEX_POINT('',#269235); +#269235 = CARTESIAN_POINT('',(124.858309,-125.066852,1.545)); +#269236 = LINE('',#269237,#269238); +#269237 = CARTESIAN_POINT('',(122.901353,-127.023809,1.545)); +#269238 = VECTOR('',#269239,1.); +#269239 = DIRECTION('',(0.707106600522,0.707106961851,0.)); +#269240 = ORIENTED_EDGE('',*,*,#269241,.F.); +#269241 = EDGE_CURVE('',#269242,#269234,#269244,.T.); +#269242 = VERTEX_POINT('',#269243); +#269243 = CARTESIAN_POINT('',(124.858309,-125.066852,1.51)); +#269244 = LINE('',#269245,#269246); +#269245 = CARTESIAN_POINT('',(124.858309,-125.066852,1.51)); +#269246 = VECTOR('',#269247,1.); +#269247 = DIRECTION('',(0.,0.,1.)); +#269248 = ORIENTED_EDGE('',*,*,#269249,.F.); +#269249 = EDGE_CURVE('',#269211,#269242,#269250,.T.); +#269250 = LINE('',#269251,#269252); +#269251 = CARTESIAN_POINT('',(122.901353,-127.023809,1.51)); +#269252 = VECTOR('',#269253,1.); +#269253 = DIRECTION('',(0.707106600522,0.707106961851,0.)); +#269254 = PLANE('',#269255); +#269255 = AXIS2_PLACEMENT_3D('',#269256,#269257,#269258); +#269256 = CARTESIAN_POINT('',(122.901353,-127.023809,1.51)); +#269257 = DIRECTION('',(-0.707106961851,0.707106600522,0.)); +#269258 = DIRECTION('',(0.707106600522,0.707106961851,0.)); +#269259 = ADVANCED_FACE('',(#269260),#269285,.T.); +#269260 = FACE_BOUND('',#269261,.T.); +#269261 = EDGE_LOOP('',(#269262,#269263,#269271,#269279)); +#269262 = ORIENTED_EDGE('',*,*,#269241,.T.); +#269263 = ORIENTED_EDGE('',*,*,#269264,.T.); +#269264 = EDGE_CURVE('',#269234,#269265,#269267,.T.); +#269265 = VERTEX_POINT('',#269266); +#269266 = CARTESIAN_POINT('',(124.894357,-125.051921,1.545)); +#269267 = LINE('',#269268,#269269); +#269268 = CARTESIAN_POINT('',(124.858309,-125.066852,1.545)); +#269269 = VECTOR('',#269270,1.); +#269270 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#269271 = ORIENTED_EDGE('',*,*,#269272,.F.); +#269272 = EDGE_CURVE('',#269273,#269265,#269275,.T.); +#269273 = VERTEX_POINT('',#269274); +#269274 = CARTESIAN_POINT('',(124.894357,-125.051921,1.51)); +#269275 = LINE('',#269276,#269277); +#269276 = CARTESIAN_POINT('',(124.894357,-125.051921,1.51)); +#269277 = VECTOR('',#269278,1.); +#269278 = DIRECTION('',(0.,0.,1.)); +#269279 = ORIENTED_EDGE('',*,*,#269280,.F.); +#269280 = EDGE_CURVE('',#269242,#269273,#269281,.T.); +#269281 = LINE('',#269282,#269283); +#269282 = CARTESIAN_POINT('',(124.858309,-125.066852,1.51)); +#269283 = VECTOR('',#269284,1.); +#269284 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#269285 = PLANE('',#269286); +#269286 = AXIS2_PLACEMENT_3D('',#269287,#269288,#269289); +#269287 = CARTESIAN_POINT('',(124.858309,-125.066852,1.51)); +#269288 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#269289 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#269290 = ADVANCED_FACE('',(#269291),#269316,.T.); +#269291 = FACE_BOUND('',#269292,.T.); +#269292 = EDGE_LOOP('',(#269293,#269294,#269302,#269310)); +#269293 = ORIENTED_EDGE('',*,*,#269272,.T.); +#269294 = ORIENTED_EDGE('',*,*,#269295,.T.); +#269295 = EDGE_CURVE('',#269265,#269296,#269298,.T.); +#269296 = VERTEX_POINT('',#269297); +#269297 = CARTESIAN_POINT('',(130.608578,-125.05,1.545)); +#269298 = LINE('',#269299,#269300); +#269299 = CARTESIAN_POINT('',(124.894357,-125.051921,1.545)); +#269300 = VECTOR('',#269301,1.); +#269301 = DIRECTION('',(0.999999943492,3.361787882274E-04,0.)); +#269302 = ORIENTED_EDGE('',*,*,#269303,.F.); +#269303 = EDGE_CURVE('',#269304,#269296,#269306,.T.); +#269304 = VERTEX_POINT('',#269305); +#269305 = CARTESIAN_POINT('',(130.608578,-125.05,1.51)); +#269306 = LINE('',#269307,#269308); +#269307 = CARTESIAN_POINT('',(130.608578,-125.05,1.51)); +#269308 = VECTOR('',#269309,1.); +#269309 = DIRECTION('',(0.,0.,1.)); +#269310 = ORIENTED_EDGE('',*,*,#269311,.F.); +#269311 = EDGE_CURVE('',#269273,#269304,#269312,.T.); +#269312 = LINE('',#269313,#269314); +#269313 = CARTESIAN_POINT('',(124.894357,-125.051921,1.51)); +#269314 = VECTOR('',#269315,1.); +#269315 = DIRECTION('',(0.999999943492,3.361787882274E-04,0.)); +#269316 = PLANE('',#269317); +#269317 = AXIS2_PLACEMENT_3D('',#269318,#269319,#269320); +#269318 = CARTESIAN_POINT('',(124.894357,-125.051921,1.51)); +#269319 = DIRECTION('',(-3.361787882274E-04,0.999999943492,0.)); +#269320 = DIRECTION('',(0.999999943492,3.361787882274E-04,0.)); +#269321 = ADVANCED_FACE('',(#269322),#269347,.T.); +#269322 = FACE_BOUND('',#269323,.T.); +#269323 = EDGE_LOOP('',(#269324,#269325,#269333,#269341)); +#269324 = ORIENTED_EDGE('',*,*,#269303,.T.); +#269325 = ORIENTED_EDGE('',*,*,#269326,.T.); +#269326 = EDGE_CURVE('',#269296,#269327,#269329,.T.); +#269327 = VERTEX_POINT('',#269328); +#269328 = CARTESIAN_POINT('',(131.8,-123.858578,1.545)); +#269329 = LINE('',#269330,#269331); +#269330 = CARTESIAN_POINT('',(130.608578,-125.05,1.545)); +#269331 = VECTOR('',#269332,1.); +#269332 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#269333 = ORIENTED_EDGE('',*,*,#269334,.F.); +#269334 = EDGE_CURVE('',#269335,#269327,#269337,.T.); +#269335 = VERTEX_POINT('',#269336); +#269336 = CARTESIAN_POINT('',(131.8,-123.858578,1.51)); +#269337 = LINE('',#269338,#269339); +#269338 = CARTESIAN_POINT('',(131.8,-123.858578,1.51)); +#269339 = VECTOR('',#269340,1.); +#269340 = DIRECTION('',(0.,0.,1.)); +#269341 = ORIENTED_EDGE('',*,*,#269342,.F.); +#269342 = EDGE_CURVE('',#269304,#269335,#269343,.T.); +#269343 = LINE('',#269344,#269345); +#269344 = CARTESIAN_POINT('',(130.608578,-125.05,1.51)); +#269345 = VECTOR('',#269346,1.); +#269346 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#269347 = PLANE('',#269348); +#269348 = AXIS2_PLACEMENT_3D('',#269349,#269350,#269351); +#269349 = CARTESIAN_POINT('',(130.608578,-125.05,1.51)); +#269350 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#269351 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#269352 = ADVANCED_FACE('',(#269353),#269378,.T.); +#269353 = FACE_BOUND('',#269354,.T.); +#269354 = EDGE_LOOP('',(#269355,#269356,#269364,#269372)); +#269355 = ORIENTED_EDGE('',*,*,#269334,.T.); +#269356 = ORIENTED_EDGE('',*,*,#269357,.T.); +#269357 = EDGE_CURVE('',#269327,#269358,#269360,.T.); +#269358 = VERTEX_POINT('',#269359); +#269359 = CARTESIAN_POINT('',(131.8,-105.941421,1.545)); +#269360 = LINE('',#269361,#269362); +#269361 = CARTESIAN_POINT('',(131.8,-123.858578,1.545)); +#269362 = VECTOR('',#269363,1.); +#269363 = DIRECTION('',(0.,1.,0.)); +#269364 = ORIENTED_EDGE('',*,*,#269365,.F.); +#269365 = EDGE_CURVE('',#269366,#269358,#269368,.T.); +#269366 = VERTEX_POINT('',#269367); +#269367 = CARTESIAN_POINT('',(131.8,-105.941421,1.51)); +#269368 = LINE('',#269369,#269370); +#269369 = CARTESIAN_POINT('',(131.8,-105.941421,1.51)); +#269370 = VECTOR('',#269371,1.); +#269371 = DIRECTION('',(0.,0.,1.)); +#269372 = ORIENTED_EDGE('',*,*,#269373,.F.); +#269373 = EDGE_CURVE('',#269335,#269366,#269374,.T.); +#269374 = LINE('',#269375,#269376); +#269375 = CARTESIAN_POINT('',(131.8,-123.858578,1.51)); +#269376 = VECTOR('',#269377,1.); +#269377 = DIRECTION('',(0.,1.,0.)); +#269378 = PLANE('',#269379); +#269379 = AXIS2_PLACEMENT_3D('',#269380,#269381,#269382); +#269380 = CARTESIAN_POINT('',(131.8,-123.858578,1.51)); +#269381 = DIRECTION('',(-1.,0.,0.)); +#269382 = DIRECTION('',(0.,1.,0.)); +#269383 = ADVANCED_FACE('',(#269384),#269409,.T.); +#269384 = FACE_BOUND('',#269385,.T.); +#269385 = EDGE_LOOP('',(#269386,#269387,#269395,#269403)); +#269386 = ORIENTED_EDGE('',*,*,#269365,.T.); +#269387 = ORIENTED_EDGE('',*,*,#269388,.T.); +#269388 = EDGE_CURVE('',#269358,#269389,#269391,.T.); +#269389 = VERTEX_POINT('',#269390); +#269390 = CARTESIAN_POINT('',(128.702343,-102.843765,1.545)); +#269391 = LINE('',#269392,#269393); +#269392 = CARTESIAN_POINT('',(131.8,-105.941421,1.545)); +#269393 = VECTOR('',#269394,1.); +#269394 = DIRECTION('',(-0.707106895322,0.707106667051,0.)); +#269395 = ORIENTED_EDGE('',*,*,#269396,.F.); +#269396 = EDGE_CURVE('',#269397,#269389,#269399,.T.); +#269397 = VERTEX_POINT('',#269398); +#269398 = CARTESIAN_POINT('',(128.702343,-102.843765,1.51)); +#269399 = LINE('',#269400,#269401); +#269400 = CARTESIAN_POINT('',(128.702343,-102.843765,1.51)); +#269401 = VECTOR('',#269402,1.); +#269402 = DIRECTION('',(0.,0.,1.)); +#269403 = ORIENTED_EDGE('',*,*,#269404,.F.); +#269404 = EDGE_CURVE('',#269366,#269397,#269405,.T.); +#269405 = LINE('',#269406,#269407); +#269406 = CARTESIAN_POINT('',(131.8,-105.941421,1.51)); +#269407 = VECTOR('',#269408,1.); +#269408 = DIRECTION('',(-0.707106895322,0.707106667051,0.)); +#269409 = PLANE('',#269410); +#269410 = AXIS2_PLACEMENT_3D('',#269411,#269412,#269413); +#269411 = CARTESIAN_POINT('',(131.8,-105.941421,1.51)); +#269412 = DIRECTION('',(-0.707106667051,-0.707106895322,0.)); +#269413 = DIRECTION('',(-0.707106895322,0.707106667051,0.)); +#269414 = ADVANCED_FACE('',(#269415),#269440,.T.); +#269415 = FACE_BOUND('',#269416,.T.); +#269416 = EDGE_LOOP('',(#269417,#269418,#269426,#269434)); +#269417 = ORIENTED_EDGE('',*,*,#269396,.T.); +#269418 = ORIENTED_EDGE('',*,*,#269419,.T.); +#269419 = EDGE_CURVE('',#269389,#269420,#269422,.T.); +#269420 = VERTEX_POINT('',#269421); +#269421 = CARTESIAN_POINT('',(128.68907,-102.851429,1.545)); +#269422 = LINE('',#269423,#269424); +#269423 = CARTESIAN_POINT('',(128.702343,-102.843765,1.545)); +#269424 = VECTOR('',#269425,1.); +#269425 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#269426 = ORIENTED_EDGE('',*,*,#269427,.F.); +#269427 = EDGE_CURVE('',#269428,#269420,#269430,.T.); +#269428 = VERTEX_POINT('',#269429); +#269429 = CARTESIAN_POINT('',(128.68907,-102.851429,1.51)); +#269430 = LINE('',#269431,#269432); +#269431 = CARTESIAN_POINT('',(128.68907,-102.851429,1.51)); +#269432 = VECTOR('',#269433,1.); +#269433 = DIRECTION('',(0.,0.,1.)); +#269434 = ORIENTED_EDGE('',*,*,#269435,.F.); +#269435 = EDGE_CURVE('',#269397,#269428,#269436,.T.); +#269436 = LINE('',#269437,#269438); +#269437 = CARTESIAN_POINT('',(128.702343,-102.843765,1.51)); +#269438 = VECTOR('',#269439,1.); +#269439 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#269440 = PLANE('',#269441); +#269441 = AXIS2_PLACEMENT_3D('',#269442,#269443,#269444); +#269442 = CARTESIAN_POINT('',(128.702343,-102.843765,1.51)); +#269443 = DIRECTION('',(0.500040608683,-0.866001957081,0.)); +#269444 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#269445 = ADVANCED_FACE('',(#269446),#269473,.T.); +#269446 = FACE_BOUND('',#269447,.T.); +#269447 = EDGE_LOOP('',(#269448,#269449,#269458,#269466)); +#269448 = ORIENTED_EDGE('',*,*,#269427,.T.); +#269449 = ORIENTED_EDGE('',*,*,#269450,.T.); +#269450 = EDGE_CURVE('',#269420,#269451,#269453,.T.); +#269451 = VERTEX_POINT('',#269452); +#269452 = CARTESIAN_POINT('',(128.851429,-102.68907,1.545)); +#269453 = CIRCLE('',#269454,0.300000118202); +#269454 = AXIS2_PLACEMENT_3D('',#269455,#269456,#269457); +#269455 = CARTESIAN_POINT('',(128.574265,-102.574265,1.545)); +#269456 = DIRECTION('',(0.,0.,-1.)); +#269457 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#269458 = ORIENTED_EDGE('',*,*,#269459,.F.); +#269459 = EDGE_CURVE('',#269460,#269451,#269462,.T.); +#269460 = VERTEX_POINT('',#269461); +#269461 = CARTESIAN_POINT('',(128.851429,-102.68907,1.51)); +#269462 = LINE('',#269463,#269464); +#269463 = CARTESIAN_POINT('',(128.851429,-102.68907,1.51)); +#269464 = VECTOR('',#269465,1.); +#269465 = DIRECTION('',(0.,0.,1.)); +#269466 = ORIENTED_EDGE('',*,*,#269467,.F.); +#269467 = EDGE_CURVE('',#269428,#269460,#269468,.T.); +#269468 = CIRCLE('',#269469,0.300000118202); +#269469 = AXIS2_PLACEMENT_3D('',#269470,#269471,#269472); +#269470 = CARTESIAN_POINT('',(128.574265,-102.574265,1.51)); +#269471 = DIRECTION('',(0.,0.,-1.)); +#269472 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#269473 = CYLINDRICAL_SURFACE('',#269474,0.300000118202); +#269474 = AXIS2_PLACEMENT_3D('',#269475,#269476,#269477); +#269475 = CARTESIAN_POINT('',(128.574265,-102.574265,1.51)); +#269476 = DIRECTION('',(0.,0.,-1.)); +#269477 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#269478 = ADVANCED_FACE('',(#269479),#269495,.T.); +#269479 = FACE_BOUND('',#269480,.T.); +#269480 = EDGE_LOOP('',(#269481,#269482,#269488,#269489)); +#269481 = ORIENTED_EDGE('',*,*,#269459,.T.); +#269482 = ORIENTED_EDGE('',*,*,#269483,.T.); +#269483 = EDGE_CURVE('',#269451,#268821,#269484,.T.); +#269484 = LINE('',#269485,#269486); +#269485 = CARTESIAN_POINT('',(128.851429,-102.68907,1.545)); +#269486 = VECTOR('',#269487,1.); +#269487 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#269488 = ORIENTED_EDGE('',*,*,#268818,.F.); +#269489 = ORIENTED_EDGE('',*,*,#269490,.F.); +#269490 = EDGE_CURVE('',#269460,#268819,#269491,.T.); +#269491 = LINE('',#269492,#269493); +#269492 = CARTESIAN_POINT('',(128.851429,-102.68907,1.51)); +#269493 = VECTOR('',#269494,1.); +#269494 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#269495 = PLANE('',#269496); +#269496 = AXIS2_PLACEMENT_3D('',#269497,#269498,#269499); +#269497 = CARTESIAN_POINT('',(128.851429,-102.68907,1.51)); +#269498 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#269499 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#269500 = ADVANCED_FACE('',(#269501),#269528,.F.); +#269501 = FACE_BOUND('',#269502,.T.); +#269502 = EDGE_LOOP('',(#269503,#269513,#269520,#269521)); +#269503 = ORIENTED_EDGE('',*,*,#269504,.T.); +#269504 = EDGE_CURVE('',#269505,#269507,#269509,.T.); +#269505 = VERTEX_POINT('',#269506); +#269506 = CARTESIAN_POINT('',(123.321755,-132.4845,1.51)); +#269507 = VERTEX_POINT('',#269508); +#269508 = CARTESIAN_POINT('',(123.321755,-132.4845,1.545)); +#269509 = LINE('',#269510,#269511); +#269510 = CARTESIAN_POINT('',(123.321755,-132.4845,1.51)); +#269511 = VECTOR('',#269512,1.); +#269512 = DIRECTION('',(0.,0.,1.)); +#269513 = ORIENTED_EDGE('',*,*,#269514,.T.); +#269514 = EDGE_CURVE('',#269507,#269507,#269515,.T.); +#269515 = CIRCLE('',#269516,0.137255); +#269516 = AXIS2_PLACEMENT_3D('',#269517,#269518,#269519); +#269517 = CARTESIAN_POINT('',(123.1845,-132.4845,1.545)); +#269518 = DIRECTION('',(0.,0.,1.)); +#269519 = DIRECTION('',(1.,0.,-0.)); +#269520 = ORIENTED_EDGE('',*,*,#269504,.F.); +#269521 = ORIENTED_EDGE('',*,*,#269522,.F.); +#269522 = EDGE_CURVE('',#269505,#269505,#269523,.T.); +#269523 = CIRCLE('',#269524,0.137255); +#269524 = AXIS2_PLACEMENT_3D('',#269525,#269526,#269527); +#269525 = CARTESIAN_POINT('',(123.1845,-132.4845,1.51)); +#269526 = DIRECTION('',(0.,0.,1.)); +#269527 = DIRECTION('',(1.,0.,-0.)); +#269528 = CYLINDRICAL_SURFACE('',#269529,0.137255); +#269529 = AXIS2_PLACEMENT_3D('',#269530,#269531,#269532); +#269530 = CARTESIAN_POINT('',(123.1845,-132.4845,1.51)); +#269531 = DIRECTION('',(-0.,-0.,-1.)); +#269532 = DIRECTION('',(1.,0.,-0.)); +#269533 = ADVANCED_FACE('',(#269534),#269561,.F.); +#269534 = FACE_BOUND('',#269535,.T.); +#269535 = EDGE_LOOP('',(#269536,#269546,#269553,#269554)); +#269536 = ORIENTED_EDGE('',*,*,#269537,.T.); +#269537 = EDGE_CURVE('',#269538,#269540,#269542,.T.); +#269538 = VERTEX_POINT('',#269539); +#269539 = CARTESIAN_POINT('',(128.71152,-102.574265,1.51)); +#269540 = VERTEX_POINT('',#269541); +#269541 = CARTESIAN_POINT('',(128.71152,-102.574265,1.545)); +#269542 = LINE('',#269543,#269544); +#269543 = CARTESIAN_POINT('',(128.71152,-102.574265,1.51)); +#269544 = VECTOR('',#269545,1.); +#269545 = DIRECTION('',(0.,0.,1.)); +#269546 = ORIENTED_EDGE('',*,*,#269547,.T.); +#269547 = EDGE_CURVE('',#269540,#269540,#269548,.T.); +#269548 = CIRCLE('',#269549,0.137255); +#269549 = AXIS2_PLACEMENT_3D('',#269550,#269551,#269552); +#269550 = CARTESIAN_POINT('',(128.574265,-102.574265,1.545)); +#269551 = DIRECTION('',(0.,0.,1.)); +#269552 = DIRECTION('',(1.,0.,-0.)); +#269553 = ORIENTED_EDGE('',*,*,#269537,.F.); +#269554 = ORIENTED_EDGE('',*,*,#269555,.F.); +#269555 = EDGE_CURVE('',#269538,#269538,#269556,.T.); +#269556 = CIRCLE('',#269557,0.137255); +#269557 = AXIS2_PLACEMENT_3D('',#269558,#269559,#269560); +#269558 = CARTESIAN_POINT('',(128.574265,-102.574265,1.51)); +#269559 = DIRECTION('',(0.,0.,1.)); +#269560 = DIRECTION('',(1.,0.,-0.)); +#269561 = CYLINDRICAL_SURFACE('',#269562,0.137255); +#269562 = AXIS2_PLACEMENT_3D('',#269563,#269564,#269565); +#269563 = CARTESIAN_POINT('',(128.574265,-102.574265,1.51)); +#269564 = DIRECTION('',(-0.,-0.,-1.)); +#269565 = DIRECTION('',(1.,0.,-0.)); +#269566 = ADVANCED_FACE('',(#269567,#269591,#269594),#269597,.F.); +#269567 = FACE_BOUND('',#269568,.T.); +#269568 = EDGE_LOOP('',(#269569,#269570,#269571,#269572,#269573,#269574, + #269575,#269576,#269577,#269578,#269579,#269580,#269581,#269582, + #269583,#269584,#269585,#269586,#269587,#269588,#269589,#269590)); +#269569 = ORIENTED_EDGE('',*,*,#268844,.T.); +#269570 = ORIENTED_EDGE('',*,*,#268875,.T.); +#269571 = ORIENTED_EDGE('',*,*,#268906,.T.); +#269572 = ORIENTED_EDGE('',*,*,#268937,.T.); +#269573 = ORIENTED_EDGE('',*,*,#268968,.T.); +#269574 = ORIENTED_EDGE('',*,*,#268999,.T.); +#269575 = ORIENTED_EDGE('',*,*,#269030,.T.); +#269576 = ORIENTED_EDGE('',*,*,#269061,.T.); +#269577 = ORIENTED_EDGE('',*,*,#269092,.T.); +#269578 = ORIENTED_EDGE('',*,*,#269123,.T.); +#269579 = ORIENTED_EDGE('',*,*,#269155,.T.); +#269580 = ORIENTED_EDGE('',*,*,#269187,.T.); +#269581 = ORIENTED_EDGE('',*,*,#269218,.T.); +#269582 = ORIENTED_EDGE('',*,*,#269249,.T.); +#269583 = ORIENTED_EDGE('',*,*,#269280,.T.); +#269584 = ORIENTED_EDGE('',*,*,#269311,.T.); +#269585 = ORIENTED_EDGE('',*,*,#269342,.T.); +#269586 = ORIENTED_EDGE('',*,*,#269373,.T.); +#269587 = ORIENTED_EDGE('',*,*,#269404,.T.); +#269588 = ORIENTED_EDGE('',*,*,#269435,.T.); +#269589 = ORIENTED_EDGE('',*,*,#269467,.T.); +#269590 = ORIENTED_EDGE('',*,*,#269490,.T.); +#269591 = FACE_BOUND('',#269592,.T.); +#269592 = EDGE_LOOP('',(#269593)); +#269593 = ORIENTED_EDGE('',*,*,#269522,.T.); +#269594 = FACE_BOUND('',#269595,.T.); +#269595 = EDGE_LOOP('',(#269596)); +#269596 = ORIENTED_EDGE('',*,*,#269555,.T.); +#269597 = PLANE('',#269598); +#269598 = AXIS2_PLACEMENT_3D('',#269599,#269600,#269601); +#269599 = CARTESIAN_POINT('',(0.,0.,1.51)); +#269600 = DIRECTION('',(0.,0.,1.)); +#269601 = DIRECTION('',(1.,0.,-0.)); +#269602 = ADVANCED_FACE('',(#269603,#269627,#269630),#269633,.T.); +#269603 = FACE_BOUND('',#269604,.F.); +#269604 = EDGE_LOOP('',(#269605,#269606,#269607,#269608,#269609,#269610, + #269611,#269612,#269613,#269614,#269615,#269616,#269617,#269618, + #269619,#269620,#269621,#269622,#269623,#269624,#269625,#269626)); +#269605 = ORIENTED_EDGE('',*,*,#268828,.T.); +#269606 = ORIENTED_EDGE('',*,*,#268859,.T.); +#269607 = ORIENTED_EDGE('',*,*,#268890,.T.); +#269608 = ORIENTED_EDGE('',*,*,#268921,.T.); +#269609 = ORIENTED_EDGE('',*,*,#268952,.T.); +#269610 = ORIENTED_EDGE('',*,*,#268983,.T.); +#269611 = ORIENTED_EDGE('',*,*,#269014,.T.); +#269612 = ORIENTED_EDGE('',*,*,#269045,.T.); +#269613 = ORIENTED_EDGE('',*,*,#269076,.T.); +#269614 = ORIENTED_EDGE('',*,*,#269107,.T.); +#269615 = ORIENTED_EDGE('',*,*,#269138,.T.); +#269616 = ORIENTED_EDGE('',*,*,#269171,.T.); +#269617 = ORIENTED_EDGE('',*,*,#269202,.T.); +#269618 = ORIENTED_EDGE('',*,*,#269233,.T.); +#269619 = ORIENTED_EDGE('',*,*,#269264,.T.); +#269620 = ORIENTED_EDGE('',*,*,#269295,.T.); +#269621 = ORIENTED_EDGE('',*,*,#269326,.T.); +#269622 = ORIENTED_EDGE('',*,*,#269357,.T.); +#269623 = ORIENTED_EDGE('',*,*,#269388,.T.); +#269624 = ORIENTED_EDGE('',*,*,#269419,.T.); +#269625 = ORIENTED_EDGE('',*,*,#269450,.T.); +#269626 = ORIENTED_EDGE('',*,*,#269483,.T.); +#269627 = FACE_BOUND('',#269628,.F.); +#269628 = EDGE_LOOP('',(#269629)); +#269629 = ORIENTED_EDGE('',*,*,#269514,.T.); +#269630 = FACE_BOUND('',#269631,.F.); +#269631 = EDGE_LOOP('',(#269632)); +#269632 = ORIENTED_EDGE('',*,*,#269547,.T.); +#269633 = PLANE('',#269634); +#269634 = AXIS2_PLACEMENT_3D('',#269635,#269636,#269637); +#269635 = CARTESIAN_POINT('',(0.,0.,1.545)); +#269636 = DIRECTION('',(0.,0.,1.)); +#269637 = DIRECTION('',(1.,0.,-0.)); +#269638 = MANIFOLD_SOLID_BREP('',#269639); +#269639 = CLOSED_SHELL('',(#269640,#269682,#269713,#269744,#269775, + #269806,#269837,#269870,#269901,#269932,#269963,#269994,#270016, + #270049,#270072)); +#269640 = ADVANCED_FACE('',(#269641),#269677,.T.); +#269641 = FACE_BOUND('',#269642,.T.); +#269642 = EDGE_LOOP('',(#269643,#269653,#269662,#269670)); +#269643 = ORIENTED_EDGE('',*,*,#269644,.T.); +#269644 = EDGE_CURVE('',#269645,#269647,#269649,.T.); +#269645 = VERTEX_POINT('',#269646); +#269646 = CARTESIAN_POINT('',(129.230491,-73.638079,1.51)); +#269647 = VERTEX_POINT('',#269648); +#269648 = CARTESIAN_POINT('',(129.230491,-73.638079,1.545)); +#269649 = LINE('',#269650,#269651); +#269650 = CARTESIAN_POINT('',(129.230491,-73.638079,1.51)); +#269651 = VECTOR('',#269652,1.); +#269652 = DIRECTION('',(0.,0.,1.)); +#269653 = ORIENTED_EDGE('',*,*,#269654,.T.); +#269654 = EDGE_CURVE('',#269647,#269655,#269657,.T.); +#269655 = VERTEX_POINT('',#269656); +#269656 = CARTESIAN_POINT('',(129.230491,-73.441921,1.545)); +#269657 = CIRCLE('',#269658,0.100000456609); +#269658 = AXIS2_PLACEMENT_3D('',#269659,#269660,#269661); +#269659 = CARTESIAN_POINT('',(129.25,-73.54,1.545)); +#269660 = DIRECTION('',(0.,0.,-1.)); +#269661 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#269662 = ORIENTED_EDGE('',*,*,#269663,.F.); +#269663 = EDGE_CURVE('',#269664,#269655,#269666,.T.); +#269664 = VERTEX_POINT('',#269665); +#269665 = CARTESIAN_POINT('',(129.230491,-73.441921,1.51)); +#269666 = LINE('',#269667,#269668); +#269667 = CARTESIAN_POINT('',(129.230491,-73.441921,1.51)); +#269668 = VECTOR('',#269669,1.); +#269669 = DIRECTION('',(0.,0.,1.)); +#269670 = ORIENTED_EDGE('',*,*,#269671,.F.); +#269671 = EDGE_CURVE('',#269645,#269664,#269672,.T.); +#269672 = CIRCLE('',#269673,0.100000456609); +#269673 = AXIS2_PLACEMENT_3D('',#269674,#269675,#269676); +#269674 = CARTESIAN_POINT('',(129.25,-73.54,1.51)); +#269675 = DIRECTION('',(0.,0.,-1.)); +#269676 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#269677 = CYLINDRICAL_SURFACE('',#269678,0.100000456609); +#269678 = AXIS2_PLACEMENT_3D('',#269679,#269680,#269681); +#269679 = CARTESIAN_POINT('',(129.25,-73.54,1.51)); +#269680 = DIRECTION('',(0.,0.,-1.)); +#269681 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#269682 = ADVANCED_FACE('',(#269683),#269708,.T.); +#269683 = FACE_BOUND('',#269684,.T.); +#269684 = EDGE_LOOP('',(#269685,#269686,#269694,#269702)); +#269685 = ORIENTED_EDGE('',*,*,#269663,.T.); +#269686 = ORIENTED_EDGE('',*,*,#269687,.T.); +#269687 = EDGE_CURVE('',#269655,#269688,#269690,.T.); +#269688 = VERTEX_POINT('',#269689); +#269689 = CARTESIAN_POINT('',(130.059509,-73.441921,1.545)); +#269690 = LINE('',#269691,#269692); +#269691 = CARTESIAN_POINT('',(129.230491,-73.441921,1.545)); +#269692 = VECTOR('',#269693,1.); +#269693 = DIRECTION('',(1.,0.,0.)); +#269694 = ORIENTED_EDGE('',*,*,#269695,.F.); +#269695 = EDGE_CURVE('',#269696,#269688,#269698,.T.); +#269696 = VERTEX_POINT('',#269697); +#269697 = CARTESIAN_POINT('',(130.059509,-73.441921,1.51)); +#269698 = LINE('',#269699,#269700); +#269699 = CARTESIAN_POINT('',(130.059509,-73.441921,1.51)); +#269700 = VECTOR('',#269701,1.); +#269701 = DIRECTION('',(0.,0.,1.)); +#269702 = ORIENTED_EDGE('',*,*,#269703,.F.); +#269703 = EDGE_CURVE('',#269664,#269696,#269704,.T.); +#269704 = LINE('',#269705,#269706); +#269705 = CARTESIAN_POINT('',(129.230491,-73.441921,1.51)); +#269706 = VECTOR('',#269707,1.); +#269707 = DIRECTION('',(1.,0.,0.)); +#269708 = PLANE('',#269709); +#269709 = AXIS2_PLACEMENT_3D('',#269710,#269711,#269712); +#269710 = CARTESIAN_POINT('',(129.230491,-73.441921,1.51)); +#269711 = DIRECTION('',(0.,1.,0.)); +#269712 = DIRECTION('',(1.,0.,0.)); +#269713 = ADVANCED_FACE('',(#269714),#269739,.T.); +#269714 = FACE_BOUND('',#269715,.T.); +#269715 = EDGE_LOOP('',(#269716,#269717,#269725,#269733)); +#269716 = ORIENTED_EDGE('',*,*,#269695,.T.); +#269717 = ORIENTED_EDGE('',*,*,#269718,.T.); +#269718 = EDGE_CURVE('',#269688,#269719,#269721,.T.); +#269719 = VERTEX_POINT('',#269720); +#269720 = CARTESIAN_POINT('',(130.095557,-73.456853,1.545)); +#269721 = LINE('',#269722,#269723); +#269722 = CARTESIAN_POINT('',(130.059509,-73.441921,1.545)); +#269723 = VECTOR('',#269724,1.); +#269724 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#269725 = ORIENTED_EDGE('',*,*,#269726,.F.); +#269726 = EDGE_CURVE('',#269727,#269719,#269729,.T.); +#269727 = VERTEX_POINT('',#269728); +#269728 = CARTESIAN_POINT('',(130.095557,-73.456853,1.51)); +#269729 = LINE('',#269730,#269731); +#269730 = CARTESIAN_POINT('',(130.095557,-73.456853,1.51)); +#269731 = VECTOR('',#269732,1.); +#269732 = DIRECTION('',(0.,0.,1.)); +#269733 = ORIENTED_EDGE('',*,*,#269734,.F.); +#269734 = EDGE_CURVE('',#269696,#269727,#269735,.T.); +#269735 = LINE('',#269736,#269737); +#269736 = CARTESIAN_POINT('',(130.059509,-73.441921,1.51)); +#269737 = VECTOR('',#269738,1.); +#269738 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#269739 = PLANE('',#269740); +#269740 = AXIS2_PLACEMENT_3D('',#269741,#269742,#269743); +#269741 = CARTESIAN_POINT('',(130.059509,-73.441921,1.51)); +#269742 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#269743 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#269744 = ADVANCED_FACE('',(#269745),#269770,.T.); +#269745 = FACE_BOUND('',#269746,.T.); +#269746 = EDGE_LOOP('',(#269747,#269748,#269756,#269764)); +#269747 = ORIENTED_EDGE('',*,*,#269726,.T.); +#269748 = ORIENTED_EDGE('',*,*,#269749,.T.); +#269749 = EDGE_CURVE('',#269719,#269750,#269752,.T.); +#269750 = VERTEX_POINT('',#269751); +#269751 = CARTESIAN_POINT('',(130.441422,-73.8,1.545)); +#269752 = LINE('',#269753,#269754); +#269753 = CARTESIAN_POINT('',(130.095557,-73.456853,1.545)); +#269754 = VECTOR('',#269755,1.); +#269755 = DIRECTION('',(0.709890637715,-0.704311921299,0.)); +#269756 = ORIENTED_EDGE('',*,*,#269757,.F.); +#269757 = EDGE_CURVE('',#269758,#269750,#269760,.T.); +#269758 = VERTEX_POINT('',#269759); +#269759 = CARTESIAN_POINT('',(130.441422,-73.8,1.51)); +#269760 = LINE('',#269761,#269762); +#269761 = CARTESIAN_POINT('',(130.441422,-73.8,1.51)); +#269762 = VECTOR('',#269763,1.); +#269763 = DIRECTION('',(0.,0.,1.)); +#269764 = ORIENTED_EDGE('',*,*,#269765,.F.); +#269765 = EDGE_CURVE('',#269727,#269758,#269766,.T.); +#269766 = LINE('',#269767,#269768); +#269767 = CARTESIAN_POINT('',(130.095557,-73.456853,1.51)); +#269768 = VECTOR('',#269769,1.); +#269769 = DIRECTION('',(0.709890637715,-0.704311921299,0.)); +#269770 = PLANE('',#269771); +#269771 = AXIS2_PLACEMENT_3D('',#269772,#269773,#269774); +#269772 = CARTESIAN_POINT('',(130.095557,-73.456853,1.51)); +#269773 = DIRECTION('',(0.704311921299,0.709890637715,-0.)); +#269774 = DIRECTION('',(0.709890637715,-0.704311921299,0.)); +#269775 = ADVANCED_FACE('',(#269776),#269801,.T.); +#269776 = FACE_BOUND('',#269777,.T.); +#269777 = EDGE_LOOP('',(#269778,#269779,#269787,#269795)); +#269778 = ORIENTED_EDGE('',*,*,#269757,.T.); +#269779 = ORIENTED_EDGE('',*,*,#269780,.T.); +#269780 = EDGE_CURVE('',#269750,#269781,#269783,.T.); +#269781 = VERTEX_POINT('',#269782); +#269782 = CARTESIAN_POINT('',(130.968869,-73.8,1.545)); +#269783 = LINE('',#269784,#269785); +#269784 = CARTESIAN_POINT('',(130.441422,-73.8,1.545)); +#269785 = VECTOR('',#269786,1.); +#269786 = DIRECTION('',(1.,0.,0.)); +#269787 = ORIENTED_EDGE('',*,*,#269788,.F.); +#269788 = EDGE_CURVE('',#269789,#269781,#269791,.T.); +#269789 = VERTEX_POINT('',#269790); +#269790 = CARTESIAN_POINT('',(130.968869,-73.8,1.51)); +#269791 = LINE('',#269792,#269793); +#269792 = CARTESIAN_POINT('',(130.968869,-73.8,1.51)); +#269793 = VECTOR('',#269794,1.); +#269794 = DIRECTION('',(0.,0.,1.)); +#269795 = ORIENTED_EDGE('',*,*,#269796,.F.); +#269796 = EDGE_CURVE('',#269758,#269789,#269797,.T.); +#269797 = LINE('',#269798,#269799); +#269798 = CARTESIAN_POINT('',(130.441422,-73.8,1.51)); +#269799 = VECTOR('',#269800,1.); +#269800 = DIRECTION('',(1.,0.,0.)); +#269801 = PLANE('',#269802); +#269802 = AXIS2_PLACEMENT_3D('',#269803,#269804,#269805); +#269803 = CARTESIAN_POINT('',(130.441422,-73.8,1.51)); +#269804 = DIRECTION('',(0.,1.,0.)); +#269805 = DIRECTION('',(1.,0.,0.)); +#269806 = ADVANCED_FACE('',(#269807),#269832,.T.); +#269807 = FACE_BOUND('',#269808,.T.); +#269808 = EDGE_LOOP('',(#269809,#269810,#269818,#269826)); +#269809 = ORIENTED_EDGE('',*,*,#269788,.T.); +#269810 = ORIENTED_EDGE('',*,*,#269811,.T.); +#269811 = EDGE_CURVE('',#269781,#269812,#269814,.T.); +#269812 = VERTEX_POINT('',#269813); +#269813 = CARTESIAN_POINT('',(130.972836,-73.785195,1.545)); +#269814 = LINE('',#269815,#269816); +#269815 = CARTESIAN_POINT('',(130.968869,-73.8,1.545)); +#269816 = VECTOR('',#269817,1.); +#269817 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#269818 = ORIENTED_EDGE('',*,*,#269819,.F.); +#269819 = EDGE_CURVE('',#269820,#269812,#269822,.T.); +#269820 = VERTEX_POINT('',#269821); +#269821 = CARTESIAN_POINT('',(130.972836,-73.785195,1.51)); +#269822 = LINE('',#269823,#269824); +#269823 = CARTESIAN_POINT('',(130.972836,-73.785195,1.51)); +#269824 = VECTOR('',#269825,1.); +#269825 = DIRECTION('',(0.,0.,1.)); +#269826 = ORIENTED_EDGE('',*,*,#269827,.F.); +#269827 = EDGE_CURVE('',#269789,#269820,#269828,.T.); +#269828 = LINE('',#269829,#269830); +#269829 = CARTESIAN_POINT('',(130.968869,-73.8,1.51)); +#269830 = VECTOR('',#269831,1.); +#269831 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#269832 = PLANE('',#269833); +#269833 = AXIS2_PLACEMENT_3D('',#269834,#269835,#269836); +#269834 = CARTESIAN_POINT('',(130.968869,-73.8,1.51)); +#269835 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#269836 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#269837 = ADVANCED_FACE('',(#269838),#269865,.T.); +#269838 = FACE_BOUND('',#269839,.T.); +#269839 = EDGE_LOOP('',(#269840,#269841,#269850,#269858)); +#269840 = ORIENTED_EDGE('',*,*,#269819,.T.); +#269841 = ORIENTED_EDGE('',*,*,#269842,.T.); +#269842 = EDGE_CURVE('',#269812,#269843,#269845,.T.); +#269843 = VERTEX_POINT('',#269844); +#269844 = CARTESIAN_POINT('',(130.972836,-74.014805,1.545)); +#269845 = CIRCLE('',#269846,0.299999850918); +#269846 = AXIS2_PLACEMENT_3D('',#269847,#269848,#269849); +#269847 = CARTESIAN_POINT('',(131.24999971069,-73.9,1.545)); +#269848 = DIRECTION('',(0.,0.,-1.)); +#269849 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#269850 = ORIENTED_EDGE('',*,*,#269851,.F.); +#269851 = EDGE_CURVE('',#269852,#269843,#269854,.T.); +#269852 = VERTEX_POINT('',#269853); +#269853 = CARTESIAN_POINT('',(130.972836,-74.014805,1.51)); +#269854 = LINE('',#269855,#269856); +#269855 = CARTESIAN_POINT('',(130.972836,-74.014805,1.51)); +#269856 = VECTOR('',#269857,1.); +#269857 = DIRECTION('',(0.,0.,1.)); +#269858 = ORIENTED_EDGE('',*,*,#269859,.F.); +#269859 = EDGE_CURVE('',#269820,#269852,#269860,.T.); +#269860 = CIRCLE('',#269861,0.299999850918); +#269861 = AXIS2_PLACEMENT_3D('',#269862,#269863,#269864); +#269862 = CARTESIAN_POINT('',(131.24999971069,-73.9,1.51)); +#269863 = DIRECTION('',(0.,0.,-1.)); +#269864 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#269865 = CYLINDRICAL_SURFACE('',#269866,0.299999850918); +#269866 = AXIS2_PLACEMENT_3D('',#269867,#269868,#269869); +#269867 = CARTESIAN_POINT('',(131.24999971069,-73.9,1.51)); +#269868 = DIRECTION('',(0.,0.,-1.)); +#269869 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#269870 = ADVANCED_FACE('',(#269871),#269896,.T.); +#269871 = FACE_BOUND('',#269872,.T.); +#269872 = EDGE_LOOP('',(#269873,#269874,#269882,#269890)); +#269873 = ORIENTED_EDGE('',*,*,#269851,.T.); +#269874 = ORIENTED_EDGE('',*,*,#269875,.T.); +#269875 = EDGE_CURVE('',#269843,#269876,#269878,.T.); +#269876 = VERTEX_POINT('',#269877); +#269877 = CARTESIAN_POINT('',(130.968869,-74.,1.545)); +#269878 = LINE('',#269879,#269880); +#269879 = CARTESIAN_POINT('',(130.972836,-74.014805,1.545)); +#269880 = VECTOR('',#269881,1.); +#269881 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#269882 = ORIENTED_EDGE('',*,*,#269883,.F.); +#269883 = EDGE_CURVE('',#269884,#269876,#269886,.T.); +#269884 = VERTEX_POINT('',#269885); +#269885 = CARTESIAN_POINT('',(130.968869,-74.,1.51)); +#269886 = LINE('',#269887,#269888); +#269887 = CARTESIAN_POINT('',(130.968869,-74.,1.51)); +#269888 = VECTOR('',#269889,1.); +#269889 = DIRECTION('',(0.,0.,1.)); +#269890 = ORIENTED_EDGE('',*,*,#269891,.F.); +#269891 = EDGE_CURVE('',#269852,#269884,#269892,.T.); +#269892 = LINE('',#269893,#269894); +#269893 = CARTESIAN_POINT('',(130.972836,-74.014805,1.51)); +#269894 = VECTOR('',#269895,1.); +#269895 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#269896 = PLANE('',#269897); +#269897 = AXIS2_PLACEMENT_3D('',#269898,#269899,#269900); +#269898 = CARTESIAN_POINT('',(130.972836,-74.014805,1.51)); +#269899 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#269900 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#269901 = ADVANCED_FACE('',(#269902),#269927,.T.); +#269902 = FACE_BOUND('',#269903,.T.); +#269903 = EDGE_LOOP('',(#269904,#269905,#269913,#269921)); +#269904 = ORIENTED_EDGE('',*,*,#269883,.T.); +#269905 = ORIENTED_EDGE('',*,*,#269906,.T.); +#269906 = EDGE_CURVE('',#269876,#269907,#269909,.T.); +#269907 = VERTEX_POINT('',#269908); +#269908 = CARTESIAN_POINT('',(130.380491,-73.998079,1.545)); +#269909 = LINE('',#269910,#269911); +#269910 = CARTESIAN_POINT('',(130.968869,-74.,1.545)); +#269911 = VECTOR('',#269912,1.); +#269912 = DIRECTION('',(-0.999994670231,3.264890532122E-03,0.)); +#269913 = ORIENTED_EDGE('',*,*,#269914,.F.); +#269914 = EDGE_CURVE('',#269915,#269907,#269917,.T.); +#269915 = VERTEX_POINT('',#269916); +#269916 = CARTESIAN_POINT('',(130.380491,-73.998079,1.51)); +#269917 = LINE('',#269918,#269919); +#269918 = CARTESIAN_POINT('',(130.380491,-73.998079,1.51)); +#269919 = VECTOR('',#269920,1.); +#269920 = DIRECTION('',(0.,0.,1.)); +#269921 = ORIENTED_EDGE('',*,*,#269922,.F.); +#269922 = EDGE_CURVE('',#269884,#269915,#269923,.T.); +#269923 = LINE('',#269924,#269925); +#269924 = CARTESIAN_POINT('',(130.968869,-74.,1.51)); +#269925 = VECTOR('',#269926,1.); +#269926 = DIRECTION('',(-0.999994670231,3.264890532122E-03,0.)); +#269927 = PLANE('',#269928); +#269928 = AXIS2_PLACEMENT_3D('',#269929,#269930,#269931); +#269929 = CARTESIAN_POINT('',(130.968869,-74.,1.51)); +#269930 = DIRECTION('',(-3.264890532122E-03,-0.999994670231,0.)); +#269931 = DIRECTION('',(-0.999994670231,3.264890532122E-03,0.)); +#269932 = ADVANCED_FACE('',(#269933),#269958,.T.); +#269933 = FACE_BOUND('',#269934,.T.); +#269934 = EDGE_LOOP('',(#269935,#269936,#269944,#269952)); +#269935 = ORIENTED_EDGE('',*,*,#269914,.T.); +#269936 = ORIENTED_EDGE('',*,*,#269937,.T.); +#269937 = EDGE_CURVE('',#269907,#269938,#269940,.T.); +#269938 = VERTEX_POINT('',#269939); +#269939 = CARTESIAN_POINT('',(130.344443,-73.983147,1.545)); +#269940 = LINE('',#269941,#269942); +#269941 = CARTESIAN_POINT('',(130.380491,-73.998079,1.545)); +#269942 = VECTOR('',#269943,1.); +#269943 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#269944 = ORIENTED_EDGE('',*,*,#269945,.F.); +#269945 = EDGE_CURVE('',#269946,#269938,#269948,.T.); +#269946 = VERTEX_POINT('',#269947); +#269947 = CARTESIAN_POINT('',(130.344443,-73.983147,1.51)); +#269948 = LINE('',#269949,#269950); +#269949 = CARTESIAN_POINT('',(130.344443,-73.983147,1.51)); +#269950 = VECTOR('',#269951,1.); +#269951 = DIRECTION('',(0.,0.,1.)); +#269952 = ORIENTED_EDGE('',*,*,#269953,.F.); +#269953 = EDGE_CURVE('',#269915,#269946,#269954,.T.); +#269954 = LINE('',#269955,#269956); +#269955 = CARTESIAN_POINT('',(130.380491,-73.998079,1.51)); +#269956 = VECTOR('',#269957,1.); +#269957 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#269958 = PLANE('',#269959); +#269959 = AXIS2_PLACEMENT_3D('',#269960,#269961,#269962); +#269960 = CARTESIAN_POINT('',(130.380491,-73.998079,1.51)); +#269961 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#269962 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#269963 = ADVANCED_FACE('',(#269964),#269989,.T.); +#269964 = FACE_BOUND('',#269965,.T.); +#269965 = EDGE_LOOP('',(#269966,#269967,#269975,#269983)); +#269966 = ORIENTED_EDGE('',*,*,#269945,.T.); +#269967 = ORIENTED_EDGE('',*,*,#269968,.T.); +#269968 = EDGE_CURVE('',#269938,#269969,#269971,.T.); +#269969 = VERTEX_POINT('',#269970); +#269970 = CARTESIAN_POINT('',(129.998578,-73.64,1.545)); +#269971 = LINE('',#269972,#269973); +#269972 = CARTESIAN_POINT('',(130.344443,-73.983147,1.545)); +#269973 = VECTOR('',#269974,1.); +#269974 = DIRECTION('',(-0.709890637715,0.704311921299,0.)); +#269975 = ORIENTED_EDGE('',*,*,#269976,.F.); +#269976 = EDGE_CURVE('',#269977,#269969,#269979,.T.); +#269977 = VERTEX_POINT('',#269978); +#269978 = CARTESIAN_POINT('',(129.998578,-73.64,1.51)); +#269979 = LINE('',#269980,#269981); +#269980 = CARTESIAN_POINT('',(129.998578,-73.64,1.51)); +#269981 = VECTOR('',#269982,1.); +#269982 = DIRECTION('',(0.,0.,1.)); +#269983 = ORIENTED_EDGE('',*,*,#269984,.F.); +#269984 = EDGE_CURVE('',#269946,#269977,#269985,.T.); +#269985 = LINE('',#269986,#269987); +#269986 = CARTESIAN_POINT('',(130.344443,-73.983147,1.51)); +#269987 = VECTOR('',#269988,1.); +#269988 = DIRECTION('',(-0.709890637715,0.704311921299,0.)); +#269989 = PLANE('',#269990); +#269990 = AXIS2_PLACEMENT_3D('',#269991,#269992,#269993); +#269991 = CARTESIAN_POINT('',(130.344443,-73.983147,1.51)); +#269992 = DIRECTION('',(-0.704311921299,-0.709890637715,0.)); +#269993 = DIRECTION('',(-0.709890637715,0.704311921299,0.)); +#269994 = ADVANCED_FACE('',(#269995),#270011,.T.); +#269995 = FACE_BOUND('',#269996,.T.); +#269996 = EDGE_LOOP('',(#269997,#269998,#270004,#270005)); +#269997 = ORIENTED_EDGE('',*,*,#269976,.T.); +#269998 = ORIENTED_EDGE('',*,*,#269999,.T.); +#269999 = EDGE_CURVE('',#269969,#269647,#270000,.T.); +#270000 = LINE('',#270001,#270002); +#270001 = CARTESIAN_POINT('',(129.998578,-73.64,1.545)); +#270002 = VECTOR('',#270003,1.); +#270003 = DIRECTION('',(-0.999996872467,2.501010942778E-03,0.)); +#270004 = ORIENTED_EDGE('',*,*,#269644,.F.); +#270005 = ORIENTED_EDGE('',*,*,#270006,.F.); +#270006 = EDGE_CURVE('',#269977,#269645,#270007,.T.); +#270007 = LINE('',#270008,#270009); +#270008 = CARTESIAN_POINT('',(129.998578,-73.64,1.51)); +#270009 = VECTOR('',#270010,1.); +#270010 = DIRECTION('',(-0.999996872467,2.501010942778E-03,0.)); +#270011 = PLANE('',#270012); +#270012 = AXIS2_PLACEMENT_3D('',#270013,#270014,#270015); +#270013 = CARTESIAN_POINT('',(129.998578,-73.64,1.51)); +#270014 = DIRECTION('',(-2.501010942778E-03,-0.999996872467,0.)); +#270015 = DIRECTION('',(-0.999996872467,2.501010942778E-03,0.)); +#270016 = ADVANCED_FACE('',(#270017),#270044,.F.); +#270017 = FACE_BOUND('',#270018,.T.); +#270018 = EDGE_LOOP('',(#270019,#270029,#270036,#270037)); +#270019 = ORIENTED_EDGE('',*,*,#270020,.T.); +#270020 = EDGE_CURVE('',#270021,#270023,#270025,.T.); +#270021 = VERTEX_POINT('',#270022); +#270022 = CARTESIAN_POINT('',(131.387255,-73.9,1.51)); +#270023 = VERTEX_POINT('',#270024); +#270024 = CARTESIAN_POINT('',(131.387255,-73.9,1.545)); +#270025 = LINE('',#270026,#270027); +#270026 = CARTESIAN_POINT('',(131.387255,-73.9,1.51)); +#270027 = VECTOR('',#270028,1.); +#270028 = DIRECTION('',(0.,0.,1.)); +#270029 = ORIENTED_EDGE('',*,*,#270030,.T.); +#270030 = EDGE_CURVE('',#270023,#270023,#270031,.T.); +#270031 = CIRCLE('',#270032,0.137255); +#270032 = AXIS2_PLACEMENT_3D('',#270033,#270034,#270035); +#270033 = CARTESIAN_POINT('',(131.25,-73.9,1.545)); +#270034 = DIRECTION('',(0.,0.,1.)); +#270035 = DIRECTION('',(1.,0.,-0.)); +#270036 = ORIENTED_EDGE('',*,*,#270020,.F.); +#270037 = ORIENTED_EDGE('',*,*,#270038,.F.); +#270038 = EDGE_CURVE('',#270021,#270021,#270039,.T.); +#270039 = CIRCLE('',#270040,0.137255); +#270040 = AXIS2_PLACEMENT_3D('',#270041,#270042,#270043); +#270041 = CARTESIAN_POINT('',(131.25,-73.9,1.51)); +#270042 = DIRECTION('',(0.,0.,1.)); +#270043 = DIRECTION('',(1.,0.,-0.)); +#270044 = CYLINDRICAL_SURFACE('',#270045,0.137255); +#270045 = AXIS2_PLACEMENT_3D('',#270046,#270047,#270048); +#270046 = CARTESIAN_POINT('',(131.25,-73.9,1.51)); +#270047 = DIRECTION('',(-0.,-0.,-1.)); +#270048 = DIRECTION('',(1.,0.,-0.)); +#270049 = ADVANCED_FACE('',(#270050,#270064),#270067,.F.); +#270050 = FACE_BOUND('',#270051,.T.); +#270051 = EDGE_LOOP('',(#270052,#270053,#270054,#270055,#270056,#270057, + #270058,#270059,#270060,#270061,#270062,#270063)); +#270052 = ORIENTED_EDGE('',*,*,#269671,.T.); +#270053 = ORIENTED_EDGE('',*,*,#269703,.T.); +#270054 = ORIENTED_EDGE('',*,*,#269734,.T.); +#270055 = ORIENTED_EDGE('',*,*,#269765,.T.); +#270056 = ORIENTED_EDGE('',*,*,#269796,.T.); +#270057 = ORIENTED_EDGE('',*,*,#269827,.T.); +#270058 = ORIENTED_EDGE('',*,*,#269859,.T.); +#270059 = ORIENTED_EDGE('',*,*,#269891,.T.); +#270060 = ORIENTED_EDGE('',*,*,#269922,.T.); +#270061 = ORIENTED_EDGE('',*,*,#269953,.T.); +#270062 = ORIENTED_EDGE('',*,*,#269984,.T.); +#270063 = ORIENTED_EDGE('',*,*,#270006,.T.); +#270064 = FACE_BOUND('',#270065,.T.); +#270065 = EDGE_LOOP('',(#270066)); +#270066 = ORIENTED_EDGE('',*,*,#270038,.T.); +#270067 = PLANE('',#270068); +#270068 = AXIS2_PLACEMENT_3D('',#270069,#270070,#270071); +#270069 = CARTESIAN_POINT('',(0.,0.,1.51)); +#270070 = DIRECTION('',(0.,0.,1.)); +#270071 = DIRECTION('',(1.,0.,-0.)); +#270072 = ADVANCED_FACE('',(#270073,#270087),#270090,.T.); +#270073 = FACE_BOUND('',#270074,.F.); +#270074 = EDGE_LOOP('',(#270075,#270076,#270077,#270078,#270079,#270080, + #270081,#270082,#270083,#270084,#270085,#270086)); +#270075 = ORIENTED_EDGE('',*,*,#269654,.T.); +#270076 = ORIENTED_EDGE('',*,*,#269687,.T.); +#270077 = ORIENTED_EDGE('',*,*,#269718,.T.); +#270078 = ORIENTED_EDGE('',*,*,#269749,.T.); +#270079 = ORIENTED_EDGE('',*,*,#269780,.T.); +#270080 = ORIENTED_EDGE('',*,*,#269811,.T.); +#270081 = ORIENTED_EDGE('',*,*,#269842,.T.); +#270082 = ORIENTED_EDGE('',*,*,#269875,.T.); +#270083 = ORIENTED_EDGE('',*,*,#269906,.T.); +#270084 = ORIENTED_EDGE('',*,*,#269937,.T.); +#270085 = ORIENTED_EDGE('',*,*,#269968,.T.); +#270086 = ORIENTED_EDGE('',*,*,#269999,.T.); +#270087 = FACE_BOUND('',#270088,.F.); +#270088 = EDGE_LOOP('',(#270089)); +#270089 = ORIENTED_EDGE('',*,*,#270030,.T.); +#270090 = PLANE('',#270091); +#270091 = AXIS2_PLACEMENT_3D('',#270092,#270093,#270094); +#270092 = CARTESIAN_POINT('',(0.,0.,1.545)); +#270093 = DIRECTION('',(0.,0.,1.)); +#270094 = DIRECTION('',(1.,0.,-0.)); +#270095 = MANIFOLD_SOLID_BREP('',#270096); +#270096 = CLOSED_SHELL('',(#270097,#270137,#270168,#270199,#270230, + #270261,#270294,#270325,#270356,#270389,#270420,#270451,#270484, + #270515,#270548,#270570,#270603,#270636,#270665)); +#270097 = ADVANCED_FACE('',(#270098),#270132,.F.); +#270098 = FACE_BOUND('',#270099,.F.); +#270099 = EDGE_LOOP('',(#270100,#270110,#270118,#270126)); +#270100 = ORIENTED_EDGE('',*,*,#270101,.T.); +#270101 = EDGE_CURVE('',#270102,#270104,#270106,.T.); +#270102 = VERTEX_POINT('',#270103); +#270103 = CARTESIAN_POINT('',(123.478371,-132.536949,0.)); +#270104 = VERTEX_POINT('',#270105); +#270105 = CARTESIAN_POINT('',(123.478371,-132.536949,-3.5E-02)); +#270106 = LINE('',#270107,#270108); +#270107 = CARTESIAN_POINT('',(123.478371,-132.536949,0.)); +#270108 = VECTOR('',#270109,1.); +#270109 = DIRECTION('',(0.,0.,-1.)); +#270110 = ORIENTED_EDGE('',*,*,#270111,.T.); +#270111 = EDGE_CURVE('',#270104,#270112,#270114,.T.); +#270112 = VERTEX_POINT('',#270113); +#270113 = CARTESIAN_POINT('',(127.483147,-136.544443,-3.5E-02)); +#270114 = LINE('',#270115,#270116); +#270115 = CARTESIAN_POINT('',(123.478371,-132.536949,-3.5E-02)); +#270116 = VECTOR('',#270117,1.); +#270117 = DIRECTION('',(0.706866868889,-0.707346612113,0.)); +#270118 = ORIENTED_EDGE('',*,*,#270119,.F.); +#270119 = EDGE_CURVE('',#270120,#270112,#270122,.T.); +#270120 = VERTEX_POINT('',#270121); +#270121 = CARTESIAN_POINT('',(127.483147,-136.544443,0.)); +#270122 = LINE('',#270123,#270124); +#270123 = CARTESIAN_POINT('',(127.483147,-136.544443,0.)); +#270124 = VECTOR('',#270125,1.); +#270125 = DIRECTION('',(0.,0.,-1.)); +#270126 = ORIENTED_EDGE('',*,*,#270127,.F.); +#270127 = EDGE_CURVE('',#270102,#270120,#270128,.T.); +#270128 = LINE('',#270129,#270130); +#270129 = CARTESIAN_POINT('',(123.478371,-132.536949,0.)); +#270130 = VECTOR('',#270131,1.); +#270131 = DIRECTION('',(0.706866868889,-0.707346612113,0.)); +#270132 = PLANE('',#270133); +#270133 = AXIS2_PLACEMENT_3D('',#270134,#270135,#270136); +#270134 = CARTESIAN_POINT('',(123.478371,-132.536949,0.)); +#270135 = DIRECTION('',(-0.707346612113,-0.706866868889,-0.)); +#270136 = DIRECTION('',(0.706866868889,-0.707346612113,0.)); +#270137 = ADVANCED_FACE('',(#270138),#270163,.F.); +#270138 = FACE_BOUND('',#270139,.F.); +#270139 = EDGE_LOOP('',(#270140,#270141,#270149,#270157)); +#270140 = ORIENTED_EDGE('',*,*,#270119,.T.); +#270141 = ORIENTED_EDGE('',*,*,#270142,.T.); +#270142 = EDGE_CURVE('',#270112,#270143,#270145,.T.); +#270143 = VERTEX_POINT('',#270144); +#270144 = CARTESIAN_POINT('',(127.498079,-136.580491,-3.5E-02)); +#270145 = LINE('',#270146,#270147); +#270146 = CARTESIAN_POINT('',(127.483147,-136.544443,-3.5E-02)); +#270147 = VECTOR('',#270148,1.); +#270148 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270149 = ORIENTED_EDGE('',*,*,#270150,.F.); +#270150 = EDGE_CURVE('',#270151,#270143,#270153,.T.); +#270151 = VERTEX_POINT('',#270152); +#270152 = CARTESIAN_POINT('',(127.498079,-136.580491,0.)); +#270153 = LINE('',#270154,#270155); +#270154 = CARTESIAN_POINT('',(127.498079,-136.580491,0.)); +#270155 = VECTOR('',#270156,1.); +#270156 = DIRECTION('',(0.,0.,-1.)); +#270157 = ORIENTED_EDGE('',*,*,#270158,.F.); +#270158 = EDGE_CURVE('',#270120,#270151,#270159,.T.); +#270159 = LINE('',#270160,#270161); +#270160 = CARTESIAN_POINT('',(127.483147,-136.544443,0.)); +#270161 = VECTOR('',#270162,1.); +#270162 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270163 = PLANE('',#270164); +#270164 = AXIS2_PLACEMENT_3D('',#270165,#270166,#270167); +#270165 = CARTESIAN_POINT('',(127.483147,-136.544443,0.)); +#270166 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#270167 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270168 = ADVANCED_FACE('',(#270169),#270194,.F.); +#270169 = FACE_BOUND('',#270170,.F.); +#270170 = EDGE_LOOP('',(#270171,#270172,#270180,#270188)); +#270171 = ORIENTED_EDGE('',*,*,#270150,.T.); +#270172 = ORIENTED_EDGE('',*,*,#270173,.T.); +#270173 = EDGE_CURVE('',#270143,#270174,#270176,.T.); +#270174 = VERTEX_POINT('',#270175); +#270175 = CARTESIAN_POINT('',(127.5,-146.,-3.5E-02)); +#270176 = LINE('',#270177,#270178); +#270177 = CARTESIAN_POINT('',(127.498079,-136.580491,-3.5E-02)); +#270178 = VECTOR('',#270179,1.); +#270179 = DIRECTION('',(2.039384388345E-04,-0.999999979205,0.)); +#270180 = ORIENTED_EDGE('',*,*,#270181,.F.); +#270181 = EDGE_CURVE('',#270182,#270174,#270184,.T.); +#270182 = VERTEX_POINT('',#270183); +#270183 = CARTESIAN_POINT('',(127.5,-146.,0.)); +#270184 = LINE('',#270185,#270186); +#270185 = CARTESIAN_POINT('',(127.5,-146.,0.)); +#270186 = VECTOR('',#270187,1.); +#270187 = DIRECTION('',(0.,0.,-1.)); +#270188 = ORIENTED_EDGE('',*,*,#270189,.F.); +#270189 = EDGE_CURVE('',#270151,#270182,#270190,.T.); +#270190 = LINE('',#270191,#270192); +#270191 = CARTESIAN_POINT('',(127.498079,-136.580491,0.)); +#270192 = VECTOR('',#270193,1.); +#270193 = DIRECTION('',(2.039384388345E-04,-0.999999979205,0.)); +#270194 = PLANE('',#270195); +#270195 = AXIS2_PLACEMENT_3D('',#270196,#270197,#270198); +#270196 = CARTESIAN_POINT('',(127.498079,-136.580491,0.)); +#270197 = DIRECTION('',(-0.999999979205,-2.039384388345E-04,-0.)); +#270198 = DIRECTION('',(2.039384388345E-04,-0.999999979205,0.)); +#270199 = ADVANCED_FACE('',(#270200),#270225,.F.); +#270200 = FACE_BOUND('',#270201,.F.); +#270201 = EDGE_LOOP('',(#270202,#270203,#270211,#270219)); +#270202 = ORIENTED_EDGE('',*,*,#270181,.T.); +#270203 = ORIENTED_EDGE('',*,*,#270204,.T.); +#270204 = EDGE_CURVE('',#270174,#270205,#270207,.T.); +#270205 = VERTEX_POINT('',#270206); +#270206 = CARTESIAN_POINT('',(136.255472,-146.,-3.5E-02)); +#270207 = LINE('',#270208,#270209); +#270208 = CARTESIAN_POINT('',(127.5,-146.,-3.5E-02)); +#270209 = VECTOR('',#270210,1.); +#270210 = DIRECTION('',(1.,0.,0.)); +#270211 = ORIENTED_EDGE('',*,*,#270212,.F.); +#270212 = EDGE_CURVE('',#270213,#270205,#270215,.T.); +#270213 = VERTEX_POINT('',#270214); +#270214 = CARTESIAN_POINT('',(136.255472,-146.,0.)); +#270215 = LINE('',#270216,#270217); +#270216 = CARTESIAN_POINT('',(136.255472,-146.,0.)); +#270217 = VECTOR('',#270218,1.); +#270218 = DIRECTION('',(0.,0.,-1.)); +#270219 = ORIENTED_EDGE('',*,*,#270220,.F.); +#270220 = EDGE_CURVE('',#270182,#270213,#270221,.T.); +#270221 = LINE('',#270222,#270223); +#270222 = CARTESIAN_POINT('',(127.5,-146.,0.)); +#270223 = VECTOR('',#270224,1.); +#270224 = DIRECTION('',(1.,0.,0.)); +#270225 = PLANE('',#270226); +#270226 = AXIS2_PLACEMENT_3D('',#270227,#270228,#270229); +#270227 = CARTESIAN_POINT('',(127.5,-146.,0.)); +#270228 = DIRECTION('',(0.,-1.,0.)); +#270229 = DIRECTION('',(1.,0.,0.)); +#270230 = ADVANCED_FACE('',(#270231),#270256,.F.); +#270231 = FACE_BOUND('',#270232,.F.); +#270232 = EDGE_LOOP('',(#270233,#270234,#270242,#270250)); +#270233 = ORIENTED_EDGE('',*,*,#270212,.T.); +#270234 = ORIENTED_EDGE('',*,*,#270235,.T.); +#270235 = EDGE_CURVE('',#270205,#270236,#270238,.T.); +#270236 = VERTEX_POINT('',#270237); +#270237 = CARTESIAN_POINT('',(136.272836,-145.935195,-3.5E-02)); +#270238 = LINE('',#270239,#270240); +#270239 = CARTESIAN_POINT('',(136.255472,-146.,-3.5E-02)); +#270240 = VECTOR('',#270241,1.); +#270241 = DIRECTION('',(0.258812823032,0.965927493466,0.)); +#270242 = ORIENTED_EDGE('',*,*,#270243,.F.); +#270243 = EDGE_CURVE('',#270244,#270236,#270246,.T.); +#270244 = VERTEX_POINT('',#270245); +#270245 = CARTESIAN_POINT('',(136.272836,-145.935195,0.)); +#270246 = LINE('',#270247,#270248); +#270247 = CARTESIAN_POINT('',(136.272836,-145.935195,0.)); +#270248 = VECTOR('',#270249,1.); +#270249 = DIRECTION('',(0.,0.,-1.)); +#270250 = ORIENTED_EDGE('',*,*,#270251,.F.); +#270251 = EDGE_CURVE('',#270213,#270244,#270252,.T.); +#270252 = LINE('',#270253,#270254); +#270253 = CARTESIAN_POINT('',(136.255472,-146.,0.)); +#270254 = VECTOR('',#270255,1.); +#270255 = DIRECTION('',(0.258812823032,0.965927493466,0.)); +#270256 = PLANE('',#270257); +#270257 = AXIS2_PLACEMENT_3D('',#270258,#270259,#270260); +#270258 = CARTESIAN_POINT('',(136.255472,-146.,0.)); +#270259 = DIRECTION('',(0.965927493466,-0.258812823032,0.)); +#270260 = DIRECTION('',(0.258812823032,0.965927493466,0.)); +#270261 = ADVANCED_FACE('',(#270262),#270289,.T.); +#270262 = FACE_BOUND('',#270263,.F.); +#270263 = EDGE_LOOP('',(#270264,#270265,#270274,#270282)); +#270264 = ORIENTED_EDGE('',*,*,#270243,.T.); +#270265 = ORIENTED_EDGE('',*,*,#270266,.T.); +#270266 = EDGE_CURVE('',#270236,#270267,#270269,.T.); +#270267 = VERTEX_POINT('',#270268); +#270268 = CARTESIAN_POINT('',(136.311994,-146.232628,-3.5E-02)); +#270269 = CIRCLE('',#270270,0.299999758992); +#270270 = AXIS2_PLACEMENT_3D('',#270271,#270272,#270273); +#270271 = CARTESIAN_POINT('',(136.54999975705,-146.0499996478,-3.5E-02) + ); +#270272 = DIRECTION('',(0.,0.,-1.)); +#270273 = DIRECTION('',(-0.923879932389,0.382682466974,-0.)); +#270274 = ORIENTED_EDGE('',*,*,#270275,.F.); +#270275 = EDGE_CURVE('',#270276,#270267,#270278,.T.); +#270276 = VERTEX_POINT('',#270277); +#270277 = CARTESIAN_POINT('',(136.311994,-146.232628,0.)); +#270278 = LINE('',#270279,#270280); +#270279 = CARTESIAN_POINT('',(136.311994,-146.232628,0.)); +#270280 = VECTOR('',#270281,1.); +#270281 = DIRECTION('',(0.,0.,-1.)); +#270282 = ORIENTED_EDGE('',*,*,#270283,.F.); +#270283 = EDGE_CURVE('',#270244,#270276,#270284,.T.); +#270284 = CIRCLE('',#270285,0.299999758992); +#270285 = AXIS2_PLACEMENT_3D('',#270286,#270287,#270288); +#270286 = CARTESIAN_POINT('',(136.54999975705,-146.0499996478,0.)); +#270287 = DIRECTION('',(0.,0.,-1.)); +#270288 = DIRECTION('',(-0.923879932389,0.382682466974,-0.)); +#270289 = CYLINDRICAL_SURFACE('',#270290,0.299999758992); +#270290 = AXIS2_PLACEMENT_3D('',#270291,#270292,#270293); +#270291 = CARTESIAN_POINT('',(136.54999975705,-146.0499996478,0.)); +#270292 = DIRECTION('',(-0.,-0.,1.)); +#270293 = DIRECTION('',(-0.923879932389,0.382682466974,-0.)); +#270294 = ADVANCED_FACE('',(#270295),#270320,.F.); +#270295 = FACE_BOUND('',#270296,.F.); +#270296 = EDGE_LOOP('',(#270297,#270298,#270306,#270314)); +#270297 = ORIENTED_EDGE('',*,*,#270275,.T.); +#270298 = ORIENTED_EDGE('',*,*,#270299,.T.); +#270299 = EDGE_CURVE('',#270267,#270300,#270302,.T.); +#270300 = VERTEX_POINT('',#270301); +#270301 = CARTESIAN_POINT('',(136.293156,-146.2,-3.5E-02)); +#270302 = LINE('',#270303,#270304); +#270303 = CARTESIAN_POINT('',(136.311994,-146.232628,-3.5E-02)); +#270304 = VECTOR('',#270305,1.); +#270305 = DIRECTION('',(-0.500004288242,0.866022927953,0.)); +#270306 = ORIENTED_EDGE('',*,*,#270307,.F.); +#270307 = EDGE_CURVE('',#270308,#270300,#270310,.T.); +#270308 = VERTEX_POINT('',#270309); +#270309 = CARTESIAN_POINT('',(136.293156,-146.2,0.)); +#270310 = LINE('',#270311,#270312); +#270311 = CARTESIAN_POINT('',(136.293156,-146.2,0.)); +#270312 = VECTOR('',#270313,1.); +#270313 = DIRECTION('',(0.,0.,-1.)); +#270314 = ORIENTED_EDGE('',*,*,#270315,.F.); +#270315 = EDGE_CURVE('',#270276,#270308,#270316,.T.); +#270316 = LINE('',#270317,#270318); +#270317 = CARTESIAN_POINT('',(136.311994,-146.232628,0.)); +#270318 = VECTOR('',#270319,1.); +#270319 = DIRECTION('',(-0.500004288242,0.866022927953,0.)); +#270320 = PLANE('',#270321); +#270321 = AXIS2_PLACEMENT_3D('',#270322,#270323,#270324); +#270322 = CARTESIAN_POINT('',(136.311994,-146.232628,0.)); +#270323 = DIRECTION('',(0.866022927953,0.500004288242,0.)); +#270324 = DIRECTION('',(-0.500004288242,0.866022927953,0.)); +#270325 = ADVANCED_FACE('',(#270326),#270351,.F.); +#270326 = FACE_BOUND('',#270327,.F.); +#270327 = EDGE_LOOP('',(#270328,#270329,#270337,#270345)); +#270328 = ORIENTED_EDGE('',*,*,#270307,.T.); +#270329 = ORIENTED_EDGE('',*,*,#270330,.T.); +#270330 = EDGE_CURVE('',#270300,#270331,#270333,.T.); +#270331 = VERTEX_POINT('',#270332); +#270332 = CARTESIAN_POINT('',(127.380491,-146.198079,-3.5E-02)); +#270333 = LINE('',#270334,#270335); +#270334 = CARTESIAN_POINT('',(136.293156,-146.2,-3.5E-02)); +#270335 = VECTOR('',#270336,1.); +#270336 = DIRECTION('',(-0.999999976772,2.155359766535E-04,0.)); +#270337 = ORIENTED_EDGE('',*,*,#270338,.F.); +#270338 = EDGE_CURVE('',#270339,#270331,#270341,.T.); +#270339 = VERTEX_POINT('',#270340); +#270340 = CARTESIAN_POINT('',(127.380491,-146.198079,0.)); +#270341 = LINE('',#270342,#270343); +#270342 = CARTESIAN_POINT('',(127.380491,-146.198079,0.)); +#270343 = VECTOR('',#270344,1.); +#270344 = DIRECTION('',(0.,0.,-1.)); +#270345 = ORIENTED_EDGE('',*,*,#270346,.F.); +#270346 = EDGE_CURVE('',#270308,#270339,#270347,.T.); +#270347 = LINE('',#270348,#270349); +#270348 = CARTESIAN_POINT('',(136.293156,-146.2,0.)); +#270349 = VECTOR('',#270350,1.); +#270350 = DIRECTION('',(-0.999999976772,2.155359766535E-04,0.)); +#270351 = PLANE('',#270352); +#270352 = AXIS2_PLACEMENT_3D('',#270353,#270354,#270355); +#270353 = CARTESIAN_POINT('',(136.293156,-146.2,0.)); +#270354 = DIRECTION('',(2.155359766535E-04,0.999999976772,0.)); +#270355 = DIRECTION('',(-0.999999976772,2.155359766535E-04,0.)); +#270356 = ADVANCED_FACE('',(#270357),#270384,.T.); +#270357 = FACE_BOUND('',#270358,.F.); +#270358 = EDGE_LOOP('',(#270359,#270360,#270369,#270377)); +#270359 = ORIENTED_EDGE('',*,*,#270338,.T.); +#270360 = ORIENTED_EDGE('',*,*,#270361,.T.); +#270361 = EDGE_CURVE('',#270331,#270362,#270364,.T.); +#270362 = VERTEX_POINT('',#270363); +#270363 = CARTESIAN_POINT('',(127.301921,-146.119509,-3.5E-02)); +#270364 = CIRCLE('',#270365,0.100002891901); +#270365 = AXIS2_PLACEMENT_3D('',#270366,#270367,#270368); +#270366 = CARTESIAN_POINT('',(127.40000207103,-146.0999979289,-3.5E-02) + ); +#270367 = DIRECTION('',(0.,0.,-1.)); +#270368 = DIRECTION('',(-0.195105068117,-0.980782347106,-0.)); +#270369 = ORIENTED_EDGE('',*,*,#270370,.F.); +#270370 = EDGE_CURVE('',#270371,#270362,#270373,.T.); +#270371 = VERTEX_POINT('',#270372); +#270372 = CARTESIAN_POINT('',(127.301921,-146.119509,0.)); +#270373 = LINE('',#270374,#270375); +#270374 = CARTESIAN_POINT('',(127.301921,-146.119509,0.)); +#270375 = VECTOR('',#270376,1.); +#270376 = DIRECTION('',(0.,0.,-1.)); +#270377 = ORIENTED_EDGE('',*,*,#270378,.F.); +#270378 = EDGE_CURVE('',#270339,#270371,#270379,.T.); +#270379 = CIRCLE('',#270380,0.100002891901); +#270380 = AXIS2_PLACEMENT_3D('',#270381,#270382,#270383); +#270381 = CARTESIAN_POINT('',(127.40000207103,-146.0999979289,0.)); +#270382 = DIRECTION('',(0.,0.,-1.)); +#270383 = DIRECTION('',(-0.195105068117,-0.980782347106,-0.)); +#270384 = CYLINDRICAL_SURFACE('',#270385,0.100002891901); +#270385 = AXIS2_PLACEMENT_3D('',#270386,#270387,#270388); +#270386 = CARTESIAN_POINT('',(127.40000207103,-146.0999979289,0.)); +#270387 = DIRECTION('',(-0.,-0.,1.)); +#270388 = DIRECTION('',(-0.195105068117,-0.980782347106,-0.)); +#270389 = ADVANCED_FACE('',(#270390),#270415,.F.); +#270390 = FACE_BOUND('',#270391,.F.); +#270391 = EDGE_LOOP('',(#270392,#270393,#270401,#270409)); +#270392 = ORIENTED_EDGE('',*,*,#270370,.T.); +#270393 = ORIENTED_EDGE('',*,*,#270394,.T.); +#270394 = EDGE_CURVE('',#270362,#270395,#270397,.T.); +#270395 = VERTEX_POINT('',#270396); +#270396 = CARTESIAN_POINT('',(127.3,-136.641422,-3.5E-02)); +#270397 = LINE('',#270398,#270399); +#270398 = CARTESIAN_POINT('',(127.301921,-146.119509,-3.5E-02)); +#270399 = VECTOR('',#270400,1.); +#270400 = DIRECTION('',(-2.026780256965E-04,0.999999979461,0.)); +#270401 = ORIENTED_EDGE('',*,*,#270402,.F.); +#270402 = EDGE_CURVE('',#270403,#270395,#270405,.T.); +#270403 = VERTEX_POINT('',#270404); +#270404 = CARTESIAN_POINT('',(127.3,-136.641422,0.)); +#270405 = LINE('',#270406,#270407); +#270406 = CARTESIAN_POINT('',(127.3,-136.641422,0.)); +#270407 = VECTOR('',#270408,1.); +#270408 = DIRECTION('',(0.,0.,-1.)); +#270409 = ORIENTED_EDGE('',*,*,#270410,.F.); +#270410 = EDGE_CURVE('',#270371,#270403,#270411,.T.); +#270411 = LINE('',#270412,#270413); +#270412 = CARTESIAN_POINT('',(127.301921,-146.119509,0.)); +#270413 = VECTOR('',#270414,1.); +#270414 = DIRECTION('',(-2.026780256965E-04,0.999999979461,0.)); +#270415 = PLANE('',#270416); +#270416 = AXIS2_PLACEMENT_3D('',#270417,#270418,#270419); +#270417 = CARTESIAN_POINT('',(127.301921,-146.119509,0.)); +#270418 = DIRECTION('',(0.999999979461,2.026780256965E-04,0.)); +#270419 = DIRECTION('',(-2.026780256965E-04,0.999999979461,0.)); +#270420 = ADVANCED_FACE('',(#270421),#270446,.F.); +#270421 = FACE_BOUND('',#270422,.F.); +#270422 = EDGE_LOOP('',(#270423,#270424,#270432,#270440)); +#270423 = ORIENTED_EDGE('',*,*,#270402,.T.); +#270424 = ORIENTED_EDGE('',*,*,#270425,.T.); +#270425 = EDGE_CURVE('',#270395,#270426,#270428,.T.); +#270426 = VERTEX_POINT('',#270427); +#270427 = CARTESIAN_POINT('',(123.374106,-132.715528,-3.5E-02)); +#270428 = LINE('',#270429,#270430); +#270429 = CARTESIAN_POINT('',(127.3,-136.641422,-3.5E-02)); +#270430 = VECTOR('',#270431,1.); +#270431 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#270432 = ORIENTED_EDGE('',*,*,#270433,.F.); +#270433 = EDGE_CURVE('',#270434,#270426,#270436,.T.); +#270434 = VERTEX_POINT('',#270435); +#270435 = CARTESIAN_POINT('',(123.374106,-132.715528,0.)); +#270436 = LINE('',#270437,#270438); +#270437 = CARTESIAN_POINT('',(123.374106,-132.715528,0.)); +#270438 = VECTOR('',#270439,1.); +#270439 = DIRECTION('',(0.,0.,-1.)); +#270440 = ORIENTED_EDGE('',*,*,#270441,.F.); +#270441 = EDGE_CURVE('',#270403,#270434,#270442,.T.); +#270442 = LINE('',#270443,#270444); +#270443 = CARTESIAN_POINT('',(127.3,-136.641422,0.)); +#270444 = VECTOR('',#270445,1.); +#270445 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#270446 = PLANE('',#270447); +#270447 = AXIS2_PLACEMENT_3D('',#270448,#270449,#270450); +#270448 = CARTESIAN_POINT('',(127.3,-136.641422,0.)); +#270449 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#270450 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#270451 = ADVANCED_FACE('',(#270452),#270479,.T.); +#270452 = FACE_BOUND('',#270453,.F.); +#270453 = EDGE_LOOP('',(#270454,#270455,#270464,#270472)); +#270454 = ORIENTED_EDGE('',*,*,#270433,.T.); +#270455 = ORIENTED_EDGE('',*,*,#270456,.T.); +#270456 = EDGE_CURVE('',#270426,#270457,#270459,.T.); +#270457 = VERTEX_POINT('',#270458); +#270458 = CARTESIAN_POINT('',(123.145342,-132.781933,-3.5E-02)); +#270459 = CIRCLE('',#270460,0.290937251618); +#270460 = AXIS2_PLACEMENT_3D('',#270461,#270462,#270463); +#270461 = CARTESIAN_POINT('',(123.18572703109,-132.4938123071,-3.5E-02) + ); +#270462 = DIRECTION('',(0.,0.,-1.)); +#270463 = DIRECTION('',(0.647490027013,-0.762073923526,0.)); +#270464 = ORIENTED_EDGE('',*,*,#270465,.F.); +#270465 = EDGE_CURVE('',#270466,#270457,#270468,.T.); +#270466 = VERTEX_POINT('',#270467); +#270467 = CARTESIAN_POINT('',(123.145342,-132.781933,0.)); +#270468 = LINE('',#270469,#270470); +#270469 = CARTESIAN_POINT('',(123.145342,-132.781933,0.)); +#270470 = VECTOR('',#270471,1.); +#270471 = DIRECTION('',(0.,0.,-1.)); +#270472 = ORIENTED_EDGE('',*,*,#270473,.F.); +#270473 = EDGE_CURVE('',#270434,#270466,#270474,.T.); +#270474 = CIRCLE('',#270475,0.290937251618); +#270475 = AXIS2_PLACEMENT_3D('',#270476,#270477,#270478); +#270476 = CARTESIAN_POINT('',(123.18572703109,-132.4938123071,0.)); +#270477 = DIRECTION('',(0.,0.,-1.)); +#270478 = DIRECTION('',(0.647490027013,-0.762073923526,0.)); +#270479 = CYLINDRICAL_SURFACE('',#270480,0.290937251618); +#270480 = AXIS2_PLACEMENT_3D('',#270481,#270482,#270483); +#270481 = CARTESIAN_POINT('',(123.18572703109,-132.4938123071,0.)); +#270482 = DIRECTION('',(-0.,-0.,1.)); +#270483 = DIRECTION('',(0.647490027013,-0.762073923526,0.)); +#270484 = ADVANCED_FACE('',(#270485),#270510,.F.); +#270485 = FACE_BOUND('',#270486,.F.); +#270486 = EDGE_LOOP('',(#270487,#270488,#270496,#270504)); +#270487 = ORIENTED_EDGE('',*,*,#270465,.T.); +#270488 = ORIENTED_EDGE('',*,*,#270489,.T.); +#270489 = EDGE_CURVE('',#270457,#270490,#270492,.T.); +#270490 = VERTEX_POINT('',#270491); +#270491 = CARTESIAN_POINT('',(123.069695,-132.761664,-3.5E-02)); +#270492 = LINE('',#270493,#270494); +#270493 = CARTESIAN_POINT('',(123.145342,-132.781933,-3.5E-02)); +#270494 = VECTOR('',#270495,1.); +#270495 = DIRECTION('',(-0.965927590159,0.258812462159,0.)); +#270496 = ORIENTED_EDGE('',*,*,#270497,.F.); +#270497 = EDGE_CURVE('',#270498,#270490,#270500,.T.); +#270498 = VERTEX_POINT('',#270499); +#270499 = CARTESIAN_POINT('',(123.069695,-132.761664,0.)); +#270500 = LINE('',#270501,#270502); +#270501 = CARTESIAN_POINT('',(123.069695,-132.761664,0.)); +#270502 = VECTOR('',#270503,1.); +#270503 = DIRECTION('',(0.,0.,-1.)); +#270504 = ORIENTED_EDGE('',*,*,#270505,.F.); +#270505 = EDGE_CURVE('',#270466,#270498,#270506,.T.); +#270506 = LINE('',#270507,#270508); +#270507 = CARTESIAN_POINT('',(123.145342,-132.781933,0.)); +#270508 = VECTOR('',#270509,1.); +#270509 = DIRECTION('',(-0.965927590159,0.258812462159,0.)); +#270510 = PLANE('',#270511); +#270511 = AXIS2_PLACEMENT_3D('',#270512,#270513,#270514); +#270512 = CARTESIAN_POINT('',(123.145342,-132.781933,0.)); +#270513 = DIRECTION('',(0.258812462159,0.965927590159,0.)); +#270514 = DIRECTION('',(-0.965927590159,0.258812462159,0.)); +#270515 = ADVANCED_FACE('',(#270516),#270543,.T.); +#270516 = FACE_BOUND('',#270517,.F.); +#270517 = EDGE_LOOP('',(#270518,#270519,#270528,#270536)); +#270518 = ORIENTED_EDGE('',*,*,#270497,.T.); +#270519 = ORIENTED_EDGE('',*,*,#270520,.T.); +#270520 = EDGE_CURVE('',#270490,#270521,#270523,.T.); +#270521 = VERTEX_POINT('',#270522); +#270522 = CARTESIAN_POINT('',(123.481933,-132.523658,-3.5E-02)); +#270523 = CIRCLE('',#270524,0.299999472923); +#270524 = AXIS2_PLACEMENT_3D('',#270525,#270526,#270527); +#270525 = CARTESIAN_POINT('',(123.1845,-132.4845006984,-3.5E-02)); +#270526 = DIRECTION('',(0.,0.,-1.)); +#270527 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#270528 = ORIENTED_EDGE('',*,*,#270529,.F.); +#270529 = EDGE_CURVE('',#270530,#270521,#270532,.T.); +#270530 = VERTEX_POINT('',#270531); +#270531 = CARTESIAN_POINT('',(123.481933,-132.523658,0.)); +#270532 = LINE('',#270533,#270534); +#270533 = CARTESIAN_POINT('',(123.481933,-132.523658,0.)); +#270534 = VECTOR('',#270535,1.); +#270535 = DIRECTION('',(0.,0.,-1.)); +#270536 = ORIENTED_EDGE('',*,*,#270537,.F.); +#270537 = EDGE_CURVE('',#270498,#270530,#270538,.T.); +#270538 = CIRCLE('',#270539,0.299999472923); +#270539 = AXIS2_PLACEMENT_3D('',#270540,#270541,#270542); +#270540 = CARTESIAN_POINT('',(123.1845,-132.4845006984,0.)); +#270541 = DIRECTION('',(0.,0.,-1.)); +#270542 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#270543 = CYLINDRICAL_SURFACE('',#270544,0.299999472923); +#270544 = AXIS2_PLACEMENT_3D('',#270545,#270546,#270547); +#270545 = CARTESIAN_POINT('',(123.1845,-132.4845006984,0.)); +#270546 = DIRECTION('',(-0.,-0.,1.)); +#270547 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#270548 = ADVANCED_FACE('',(#270549),#270565,.F.); +#270549 = FACE_BOUND('',#270550,.F.); +#270550 = EDGE_LOOP('',(#270551,#270552,#270558,#270559)); +#270551 = ORIENTED_EDGE('',*,*,#270529,.T.); +#270552 = ORIENTED_EDGE('',*,*,#270553,.T.); +#270553 = EDGE_CURVE('',#270521,#270104,#270554,.T.); +#270554 = LINE('',#270555,#270556); +#270555 = CARTESIAN_POINT('',(123.481933,-132.523658,-3.5E-02)); +#270556 = VECTOR('',#270557,1.); +#270557 = DIRECTION('',(-0.258865646733,-0.965913338215,0.)); +#270558 = ORIENTED_EDGE('',*,*,#270101,.F.); +#270559 = ORIENTED_EDGE('',*,*,#270560,.F.); +#270560 = EDGE_CURVE('',#270530,#270102,#270561,.T.); +#270561 = LINE('',#270562,#270563); +#270562 = CARTESIAN_POINT('',(123.481933,-132.523658,0.)); +#270563 = VECTOR('',#270564,1.); +#270564 = DIRECTION('',(-0.258865646733,-0.965913338215,0.)); +#270565 = PLANE('',#270566); +#270566 = AXIS2_PLACEMENT_3D('',#270567,#270568,#270569); +#270567 = CARTESIAN_POINT('',(123.481933,-132.523658,0.)); +#270568 = DIRECTION('',(-0.965913338215,0.258865646733,0.)); +#270569 = DIRECTION('',(-0.258865646733,-0.965913338215,0.)); +#270570 = ADVANCED_FACE('',(#270571),#270598,.F.); +#270571 = FACE_BOUND('',#270572,.F.); +#270572 = EDGE_LOOP('',(#270573,#270583,#270590,#270591)); +#270573 = ORIENTED_EDGE('',*,*,#270574,.T.); +#270574 = EDGE_CURVE('',#270575,#270577,#270579,.T.); +#270575 = VERTEX_POINT('',#270576); +#270576 = CARTESIAN_POINT('',(136.687255,-146.05,0.)); +#270577 = VERTEX_POINT('',#270578); +#270578 = CARTESIAN_POINT('',(136.687255,-146.05,-3.5E-02)); +#270579 = LINE('',#270580,#270581); +#270580 = CARTESIAN_POINT('',(136.687255,-146.05,0.)); +#270581 = VECTOR('',#270582,1.); +#270582 = DIRECTION('',(0.,0.,-1.)); +#270583 = ORIENTED_EDGE('',*,*,#270584,.T.); +#270584 = EDGE_CURVE('',#270577,#270577,#270585,.T.); +#270585 = CIRCLE('',#270586,0.137255); +#270586 = AXIS2_PLACEMENT_3D('',#270587,#270588,#270589); +#270587 = CARTESIAN_POINT('',(136.55,-146.05,-3.5E-02)); +#270588 = DIRECTION('',(0.,0.,1.)); +#270589 = DIRECTION('',(1.,0.,-0.)); +#270590 = ORIENTED_EDGE('',*,*,#270574,.F.); +#270591 = ORIENTED_EDGE('',*,*,#270592,.F.); +#270592 = EDGE_CURVE('',#270575,#270575,#270593,.T.); +#270593 = CIRCLE('',#270594,0.137255); +#270594 = AXIS2_PLACEMENT_3D('',#270595,#270596,#270597); +#270595 = CARTESIAN_POINT('',(136.55,-146.05,0.)); +#270596 = DIRECTION('',(0.,0.,1.)); +#270597 = DIRECTION('',(1.,0.,-0.)); +#270598 = CYLINDRICAL_SURFACE('',#270599,0.137255); +#270599 = AXIS2_PLACEMENT_3D('',#270600,#270601,#270602); +#270600 = CARTESIAN_POINT('',(136.55,-146.05,0.)); +#270601 = DIRECTION('',(0.,0.,1.)); +#270602 = DIRECTION('',(1.,0.,-0.)); +#270603 = ADVANCED_FACE('',(#270604),#270631,.F.); +#270604 = FACE_BOUND('',#270605,.F.); +#270605 = EDGE_LOOP('',(#270606,#270616,#270623,#270624)); +#270606 = ORIENTED_EDGE('',*,*,#270607,.T.); +#270607 = EDGE_CURVE('',#270608,#270610,#270612,.T.); +#270608 = VERTEX_POINT('',#270609); +#270609 = CARTESIAN_POINT('',(123.321755,-132.4845,0.)); +#270610 = VERTEX_POINT('',#270611); +#270611 = CARTESIAN_POINT('',(123.321755,-132.4845,-3.5E-02)); +#270612 = LINE('',#270613,#270614); +#270613 = CARTESIAN_POINT('',(123.321755,-132.4845,0.)); +#270614 = VECTOR('',#270615,1.); +#270615 = DIRECTION('',(0.,0.,-1.)); +#270616 = ORIENTED_EDGE('',*,*,#270617,.T.); +#270617 = EDGE_CURVE('',#270610,#270610,#270618,.T.); +#270618 = CIRCLE('',#270619,0.137255); +#270619 = AXIS2_PLACEMENT_3D('',#270620,#270621,#270622); +#270620 = CARTESIAN_POINT('',(123.1845,-132.4845,-3.5E-02)); +#270621 = DIRECTION('',(0.,0.,1.)); +#270622 = DIRECTION('',(1.,0.,-0.)); +#270623 = ORIENTED_EDGE('',*,*,#270607,.F.); +#270624 = ORIENTED_EDGE('',*,*,#270625,.F.); +#270625 = EDGE_CURVE('',#270608,#270608,#270626,.T.); +#270626 = CIRCLE('',#270627,0.137255); +#270627 = AXIS2_PLACEMENT_3D('',#270628,#270629,#270630); +#270628 = CARTESIAN_POINT('',(123.1845,-132.4845,0.)); +#270629 = DIRECTION('',(0.,0.,1.)); +#270630 = DIRECTION('',(1.,0.,-0.)); +#270631 = CYLINDRICAL_SURFACE('',#270632,0.137255); +#270632 = AXIS2_PLACEMENT_3D('',#270633,#270634,#270635); +#270633 = CARTESIAN_POINT('',(123.1845,-132.4845,0.)); +#270634 = DIRECTION('',(0.,0.,1.)); +#270635 = DIRECTION('',(1.,0.,-0.)); +#270636 = ADVANCED_FACE('',(#270637,#270654,#270657),#270660,.F.); +#270637 = FACE_BOUND('',#270638,.F.); +#270638 = EDGE_LOOP('',(#270639,#270640,#270641,#270642,#270643,#270644, + #270645,#270646,#270647,#270648,#270649,#270650,#270651,#270652, + #270653)); +#270639 = ORIENTED_EDGE('',*,*,#270127,.T.); +#270640 = ORIENTED_EDGE('',*,*,#270158,.T.); +#270641 = ORIENTED_EDGE('',*,*,#270189,.T.); +#270642 = ORIENTED_EDGE('',*,*,#270220,.T.); +#270643 = ORIENTED_EDGE('',*,*,#270251,.T.); +#270644 = ORIENTED_EDGE('',*,*,#270283,.T.); +#270645 = ORIENTED_EDGE('',*,*,#270315,.T.); +#270646 = ORIENTED_EDGE('',*,*,#270346,.T.); +#270647 = ORIENTED_EDGE('',*,*,#270378,.T.); +#270648 = ORIENTED_EDGE('',*,*,#270410,.T.); +#270649 = ORIENTED_EDGE('',*,*,#270441,.T.); +#270650 = ORIENTED_EDGE('',*,*,#270473,.T.); +#270651 = ORIENTED_EDGE('',*,*,#270505,.T.); +#270652 = ORIENTED_EDGE('',*,*,#270537,.T.); +#270653 = ORIENTED_EDGE('',*,*,#270560,.T.); +#270654 = FACE_BOUND('',#270655,.F.); +#270655 = EDGE_LOOP('',(#270656)); +#270656 = ORIENTED_EDGE('',*,*,#270592,.T.); +#270657 = FACE_BOUND('',#270658,.F.); +#270658 = EDGE_LOOP('',(#270659)); +#270659 = ORIENTED_EDGE('',*,*,#270625,.T.); +#270660 = PLANE('',#270661); +#270661 = AXIS2_PLACEMENT_3D('',#270662,#270663,#270664); +#270662 = CARTESIAN_POINT('',(0.,0.,0.)); +#270663 = DIRECTION('',(-0.,-0.,-1.)); +#270664 = DIRECTION('',(-1.,0.,0.)); +#270665 = ADVANCED_FACE('',(#270666,#270683,#270686),#270689,.T.); +#270666 = FACE_BOUND('',#270667,.T.); +#270667 = EDGE_LOOP('',(#270668,#270669,#270670,#270671,#270672,#270673, + #270674,#270675,#270676,#270677,#270678,#270679,#270680,#270681, + #270682)); +#270668 = ORIENTED_EDGE('',*,*,#270111,.T.); +#270669 = ORIENTED_EDGE('',*,*,#270142,.T.); +#270670 = ORIENTED_EDGE('',*,*,#270173,.T.); +#270671 = ORIENTED_EDGE('',*,*,#270204,.T.); +#270672 = ORIENTED_EDGE('',*,*,#270235,.T.); +#270673 = ORIENTED_EDGE('',*,*,#270266,.T.); +#270674 = ORIENTED_EDGE('',*,*,#270299,.T.); +#270675 = ORIENTED_EDGE('',*,*,#270330,.T.); +#270676 = ORIENTED_EDGE('',*,*,#270361,.T.); +#270677 = ORIENTED_EDGE('',*,*,#270394,.T.); +#270678 = ORIENTED_EDGE('',*,*,#270425,.T.); +#270679 = ORIENTED_EDGE('',*,*,#270456,.T.); +#270680 = ORIENTED_EDGE('',*,*,#270489,.T.); +#270681 = ORIENTED_EDGE('',*,*,#270520,.T.); +#270682 = ORIENTED_EDGE('',*,*,#270553,.T.); +#270683 = FACE_BOUND('',#270684,.T.); +#270684 = EDGE_LOOP('',(#270685)); +#270685 = ORIENTED_EDGE('',*,*,#270584,.T.); +#270686 = FACE_BOUND('',#270687,.T.); +#270687 = EDGE_LOOP('',(#270688)); +#270688 = ORIENTED_EDGE('',*,*,#270617,.T.); +#270689 = PLANE('',#270690); +#270690 = AXIS2_PLACEMENT_3D('',#270691,#270692,#270693); +#270691 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#270692 = DIRECTION('',(-0.,-0.,-1.)); +#270693 = DIRECTION('',(-1.,0.,0.)); +#270694 = MANIFOLD_SOLID_BREP('',#270695); +#270695 = CLOSED_SHELL('',(#270696,#270736,#270767,#270798,#270829, + #270860,#270891,#270922,#270953,#270984,#271015,#271046,#271077, + #271108,#271139,#271172,#271203,#271234,#271265,#271296,#271327, + #271358,#271389,#271420,#271451,#271482,#271513,#271544,#271575, + #271606,#271637,#271670,#271692,#271725,#271758,#271804)); +#270696 = ADVANCED_FACE('',(#270697),#270731,.F.); +#270697 = FACE_BOUND('',#270698,.F.); +#270698 = EDGE_LOOP('',(#270699,#270709,#270717,#270725)); +#270699 = ORIENTED_EDGE('',*,*,#270700,.T.); +#270700 = EDGE_CURVE('',#270701,#270703,#270705,.T.); +#270701 = VERTEX_POINT('',#270702); +#270702 = CARTESIAN_POINT('',(131.5195,-74.028078,0.)); +#270703 = VERTEX_POINT('',#270704); +#270704 = CARTESIAN_POINT('',(131.5195,-74.028078,-3.5E-02)); +#270705 = LINE('',#270706,#270707); +#270706 = CARTESIAN_POINT('',(131.5195,-74.028078,0.)); +#270707 = VECTOR('',#270708,1.); +#270708 = DIRECTION('',(0.,0.,-1.)); +#270709 = ORIENTED_EDGE('',*,*,#270710,.T.); +#270710 = EDGE_CURVE('',#270703,#270711,#270713,.T.); +#270711 = VERTEX_POINT('',#270712); +#270712 = CARTESIAN_POINT('',(131.633147,-74.144443,-3.5E-02)); +#270713 = LINE('',#270714,#270715); +#270714 = CARTESIAN_POINT('',(131.5195,-74.028078,-3.5E-02)); +#270715 = VECTOR('',#270716,1.); +#270716 = DIRECTION('',(0.698702279259,-0.715412555773,0.)); +#270717 = ORIENTED_EDGE('',*,*,#270718,.F.); +#270718 = EDGE_CURVE('',#270719,#270711,#270721,.T.); +#270719 = VERTEX_POINT('',#270720); +#270720 = CARTESIAN_POINT('',(131.633147,-74.144443,0.)); +#270721 = LINE('',#270722,#270723); +#270722 = CARTESIAN_POINT('',(131.633147,-74.144443,0.)); +#270723 = VECTOR('',#270724,1.); +#270724 = DIRECTION('',(0.,0.,-1.)); +#270725 = ORIENTED_EDGE('',*,*,#270726,.F.); +#270726 = EDGE_CURVE('',#270701,#270719,#270727,.T.); +#270727 = LINE('',#270728,#270729); +#270728 = CARTESIAN_POINT('',(131.5195,-74.028078,0.)); +#270729 = VECTOR('',#270730,1.); +#270730 = DIRECTION('',(0.698702279259,-0.715412555773,0.)); +#270731 = PLANE('',#270732); +#270732 = AXIS2_PLACEMENT_3D('',#270733,#270734,#270735); +#270733 = CARTESIAN_POINT('',(131.5195,-74.028078,0.)); +#270734 = DIRECTION('',(-0.715412555773,-0.698702279259,-0.)); +#270735 = DIRECTION('',(0.698702279259,-0.715412555773,0.)); +#270736 = ADVANCED_FACE('',(#270737),#270762,.F.); +#270737 = FACE_BOUND('',#270738,.F.); +#270738 = EDGE_LOOP('',(#270739,#270740,#270748,#270756)); +#270739 = ORIENTED_EDGE('',*,*,#270718,.T.); +#270740 = ORIENTED_EDGE('',*,*,#270741,.T.); +#270741 = EDGE_CURVE('',#270711,#270742,#270744,.T.); +#270742 = VERTEX_POINT('',#270743); +#270743 = CARTESIAN_POINT('',(131.648079,-74.180491,-3.5E-02)); +#270744 = LINE('',#270745,#270746); +#270745 = CARTESIAN_POINT('',(131.633147,-74.144443,-3.5E-02)); +#270746 = VECTOR('',#270747,1.); +#270747 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270748 = ORIENTED_EDGE('',*,*,#270749,.F.); +#270749 = EDGE_CURVE('',#270750,#270742,#270752,.T.); +#270750 = VERTEX_POINT('',#270751); +#270751 = CARTESIAN_POINT('',(131.648079,-74.180491,0.)); +#270752 = LINE('',#270753,#270754); +#270753 = CARTESIAN_POINT('',(131.648079,-74.180491,0.)); +#270754 = VECTOR('',#270755,1.); +#270755 = DIRECTION('',(0.,0.,-1.)); +#270756 = ORIENTED_EDGE('',*,*,#270757,.F.); +#270757 = EDGE_CURVE('',#270719,#270750,#270758,.T.); +#270758 = LINE('',#270759,#270760); +#270759 = CARTESIAN_POINT('',(131.633147,-74.144443,0.)); +#270760 = VECTOR('',#270761,1.); +#270761 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270762 = PLANE('',#270763); +#270763 = AXIS2_PLACEMENT_3D('',#270764,#270765,#270766); +#270764 = CARTESIAN_POINT('',(131.633147,-74.144443,0.)); +#270765 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#270766 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#270767 = ADVANCED_FACE('',(#270768),#270793,.F.); +#270768 = FACE_BOUND('',#270769,.F.); +#270769 = EDGE_LOOP('',(#270770,#270771,#270779,#270787)); +#270770 = ORIENTED_EDGE('',*,*,#270749,.T.); +#270771 = ORIENTED_EDGE('',*,*,#270772,.T.); +#270772 = EDGE_CURVE('',#270742,#270773,#270775,.T.); +#270773 = VERTEX_POINT('',#270774); +#270774 = CARTESIAN_POINT('',(131.648079,-78.169509,-3.5E-02)); +#270775 = LINE('',#270776,#270777); +#270776 = CARTESIAN_POINT('',(131.648079,-74.180491,-3.5E-02)); +#270777 = VECTOR('',#270778,1.); +#270778 = DIRECTION('',(0.,-1.,0.)); +#270779 = ORIENTED_EDGE('',*,*,#270780,.F.); +#270780 = EDGE_CURVE('',#270781,#270773,#270783,.T.); +#270781 = VERTEX_POINT('',#270782); +#270782 = CARTESIAN_POINT('',(131.648079,-78.169509,0.)); +#270783 = LINE('',#270784,#270785); +#270784 = CARTESIAN_POINT('',(131.648079,-78.169509,0.)); +#270785 = VECTOR('',#270786,1.); +#270786 = DIRECTION('',(0.,0.,-1.)); +#270787 = ORIENTED_EDGE('',*,*,#270788,.F.); +#270788 = EDGE_CURVE('',#270750,#270781,#270789,.T.); +#270789 = LINE('',#270790,#270791); +#270790 = CARTESIAN_POINT('',(131.648079,-74.180491,0.)); +#270791 = VECTOR('',#270792,1.); +#270792 = DIRECTION('',(0.,-1.,0.)); +#270793 = PLANE('',#270794); +#270794 = AXIS2_PLACEMENT_3D('',#270795,#270796,#270797); +#270795 = CARTESIAN_POINT('',(131.648079,-74.180491,0.)); +#270796 = DIRECTION('',(-1.,-0.,-0.)); +#270797 = DIRECTION('',(0.,-1.,0.)); +#270798 = ADVANCED_FACE('',(#270799),#270824,.F.); +#270799 = FACE_BOUND('',#270800,.F.); +#270800 = EDGE_LOOP('',(#270801,#270802,#270810,#270818)); +#270801 = ORIENTED_EDGE('',*,*,#270780,.T.); +#270802 = ORIENTED_EDGE('',*,*,#270803,.T.); +#270803 = EDGE_CURVE('',#270773,#270804,#270806,.T.); +#270804 = VERTEX_POINT('',#270805); +#270805 = CARTESIAN_POINT('',(131.633147,-78.205557,-3.5E-02)); +#270806 = LINE('',#270807,#270808); +#270807 = CARTESIAN_POINT('',(131.648079,-78.169509,-3.5E-02)); +#270808 = VECTOR('',#270809,1.); +#270809 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270810 = ORIENTED_EDGE('',*,*,#270811,.F.); +#270811 = EDGE_CURVE('',#270812,#270804,#270814,.T.); +#270812 = VERTEX_POINT('',#270813); +#270813 = CARTESIAN_POINT('',(131.633147,-78.205557,0.)); +#270814 = LINE('',#270815,#270816); +#270815 = CARTESIAN_POINT('',(131.633147,-78.205557,0.)); +#270816 = VECTOR('',#270817,1.); +#270817 = DIRECTION('',(0.,0.,-1.)); +#270818 = ORIENTED_EDGE('',*,*,#270819,.F.); +#270819 = EDGE_CURVE('',#270781,#270812,#270820,.T.); +#270820 = LINE('',#270821,#270822); +#270821 = CARTESIAN_POINT('',(131.648079,-78.169509,0.)); +#270822 = VECTOR('',#270823,1.); +#270823 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270824 = PLANE('',#270825); +#270825 = AXIS2_PLACEMENT_3D('',#270826,#270827,#270828); +#270826 = CARTESIAN_POINT('',(131.648079,-78.169509,0.)); +#270827 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#270828 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270829 = ADVANCED_FACE('',(#270830),#270855,.F.); +#270830 = FACE_BOUND('',#270831,.F.); +#270831 = EDGE_LOOP('',(#270832,#270833,#270841,#270849)); +#270832 = ORIENTED_EDGE('',*,*,#270811,.T.); +#270833 = ORIENTED_EDGE('',*,*,#270834,.T.); +#270834 = EDGE_CURVE('',#270804,#270835,#270837,.T.); +#270835 = VERTEX_POINT('',#270836); +#270836 = CARTESIAN_POINT('',(130.7,-79.141422,-3.5E-02)); +#270837 = LINE('',#270838,#270839); +#270838 = CARTESIAN_POINT('',(131.633147,-78.205557,-3.5E-02)); +#270839 = VECTOR('',#270840,1.); +#270840 = DIRECTION('',(-0.706077728583,-0.708134338384,0.)); +#270841 = ORIENTED_EDGE('',*,*,#270842,.F.); +#270842 = EDGE_CURVE('',#270843,#270835,#270845,.T.); +#270843 = VERTEX_POINT('',#270844); +#270844 = CARTESIAN_POINT('',(130.7,-79.141422,0.)); +#270845 = LINE('',#270846,#270847); +#270846 = CARTESIAN_POINT('',(130.7,-79.141422,0.)); +#270847 = VECTOR('',#270848,1.); +#270848 = DIRECTION('',(0.,0.,-1.)); +#270849 = ORIENTED_EDGE('',*,*,#270850,.F.); +#270850 = EDGE_CURVE('',#270812,#270843,#270851,.T.); +#270851 = LINE('',#270852,#270853); +#270852 = CARTESIAN_POINT('',(131.633147,-78.205557,0.)); +#270853 = VECTOR('',#270854,1.); +#270854 = DIRECTION('',(-0.706077728583,-0.708134338384,0.)); +#270855 = PLANE('',#270856); +#270856 = AXIS2_PLACEMENT_3D('',#270857,#270858,#270859); +#270857 = CARTESIAN_POINT('',(131.633147,-78.205557,0.)); +#270858 = DIRECTION('',(-0.708134338384,0.706077728583,0.)); +#270859 = DIRECTION('',(-0.706077728583,-0.708134338384,0.)); +#270860 = ADVANCED_FACE('',(#270861),#270886,.F.); +#270861 = FACE_BOUND('',#270862,.F.); +#270862 = EDGE_LOOP('',(#270863,#270864,#270872,#270880)); +#270863 = ORIENTED_EDGE('',*,*,#270842,.T.); +#270864 = ORIENTED_EDGE('',*,*,#270865,.T.); +#270865 = EDGE_CURVE('',#270835,#270866,#270868,.T.); +#270866 = VERTEX_POINT('',#270867); +#270867 = CARTESIAN_POINT('',(130.698079,-80.419509,-3.5E-02)); +#270868 = LINE('',#270869,#270870); +#270869 = CARTESIAN_POINT('',(130.7,-79.141422,-3.5E-02)); +#270870 = VECTOR('',#270871,1.); +#270871 = DIRECTION('',(-1.503025873925E-03,-0.999998870456,0.)); +#270872 = ORIENTED_EDGE('',*,*,#270873,.F.); +#270873 = EDGE_CURVE('',#270874,#270866,#270876,.T.); +#270874 = VERTEX_POINT('',#270875); +#270875 = CARTESIAN_POINT('',(130.698079,-80.419509,0.)); +#270876 = LINE('',#270877,#270878); +#270877 = CARTESIAN_POINT('',(130.698079,-80.419509,0.)); +#270878 = VECTOR('',#270879,1.); +#270879 = DIRECTION('',(0.,0.,-1.)); +#270880 = ORIENTED_EDGE('',*,*,#270881,.F.); +#270881 = EDGE_CURVE('',#270843,#270874,#270882,.T.); +#270882 = LINE('',#270883,#270884); +#270883 = CARTESIAN_POINT('',(130.7,-79.141422,0.)); +#270884 = VECTOR('',#270885,1.); +#270885 = DIRECTION('',(-1.503025873925E-03,-0.999998870456,0.)); +#270886 = PLANE('',#270887); +#270887 = AXIS2_PLACEMENT_3D('',#270888,#270889,#270890); +#270888 = CARTESIAN_POINT('',(130.7,-79.141422,0.)); +#270889 = DIRECTION('',(-0.999998870456,1.503025873925E-03,0.)); +#270890 = DIRECTION('',(-1.503025873925E-03,-0.999998870456,0.)); +#270891 = ADVANCED_FACE('',(#270892),#270917,.F.); +#270892 = FACE_BOUND('',#270893,.F.); +#270893 = EDGE_LOOP('',(#270894,#270895,#270903,#270911)); +#270894 = ORIENTED_EDGE('',*,*,#270873,.T.); +#270895 = ORIENTED_EDGE('',*,*,#270896,.T.); +#270896 = EDGE_CURVE('',#270866,#270897,#270899,.T.); +#270897 = VERTEX_POINT('',#270898); +#270898 = CARTESIAN_POINT('',(130.683147,-80.455557,-3.5E-02)); +#270899 = LINE('',#270900,#270901); +#270900 = CARTESIAN_POINT('',(130.698079,-80.419509,-3.5E-02)); +#270901 = VECTOR('',#270902,1.); +#270902 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270903 = ORIENTED_EDGE('',*,*,#270904,.F.); +#270904 = EDGE_CURVE('',#270905,#270897,#270907,.T.); +#270905 = VERTEX_POINT('',#270906); +#270906 = CARTESIAN_POINT('',(130.683147,-80.455557,0.)); +#270907 = LINE('',#270908,#270909); +#270908 = CARTESIAN_POINT('',(130.683147,-80.455557,0.)); +#270909 = VECTOR('',#270910,1.); +#270910 = DIRECTION('',(0.,0.,-1.)); +#270911 = ORIENTED_EDGE('',*,*,#270912,.F.); +#270912 = EDGE_CURVE('',#270874,#270905,#270913,.T.); +#270913 = LINE('',#270914,#270915); +#270914 = CARTESIAN_POINT('',(130.698079,-80.419509,0.)); +#270915 = VECTOR('',#270916,1.); +#270916 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270917 = PLANE('',#270918); +#270918 = AXIS2_PLACEMENT_3D('',#270919,#270920,#270921); +#270919 = CARTESIAN_POINT('',(130.698079,-80.419509,0.)); +#270920 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#270921 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#270922 = ADVANCED_FACE('',(#270923),#270948,.F.); +#270923 = FACE_BOUND('',#270924,.F.); +#270924 = EDGE_LOOP('',(#270925,#270926,#270934,#270942)); +#270925 = ORIENTED_EDGE('',*,*,#270904,.T.); +#270926 = ORIENTED_EDGE('',*,*,#270927,.T.); +#270927 = EDGE_CURVE('',#270897,#270928,#270930,.T.); +#270928 = VERTEX_POINT('',#270929); +#270929 = CARTESIAN_POINT('',(128.5,-82.641422,-3.5E-02)); +#270930 = LINE('',#270931,#270932); +#270931 = CARTESIAN_POINT('',(130.683147,-80.455557,-3.5E-02)); +#270932 = VECTOR('',#270933,1.); +#270933 = DIRECTION('',(-0.70666674722,-0.707546541489,0.)); +#270934 = ORIENTED_EDGE('',*,*,#270935,.F.); +#270935 = EDGE_CURVE('',#270936,#270928,#270938,.T.); +#270936 = VERTEX_POINT('',#270937); +#270937 = CARTESIAN_POINT('',(128.5,-82.641422,0.)); +#270938 = LINE('',#270939,#270940); +#270939 = CARTESIAN_POINT('',(128.5,-82.641422,0.)); +#270940 = VECTOR('',#270941,1.); +#270941 = DIRECTION('',(0.,0.,-1.)); +#270942 = ORIENTED_EDGE('',*,*,#270943,.F.); +#270943 = EDGE_CURVE('',#270905,#270936,#270944,.T.); +#270944 = LINE('',#270945,#270946); +#270945 = CARTESIAN_POINT('',(130.683147,-80.455557,0.)); +#270946 = VECTOR('',#270947,1.); +#270947 = DIRECTION('',(-0.70666674722,-0.707546541489,0.)); +#270948 = PLANE('',#270949); +#270949 = AXIS2_PLACEMENT_3D('',#270950,#270951,#270952); +#270950 = CARTESIAN_POINT('',(130.683147,-80.455557,0.)); +#270951 = DIRECTION('',(-0.707546541489,0.70666674722,0.)); +#270952 = DIRECTION('',(-0.70666674722,-0.707546541489,0.)); +#270953 = ADVANCED_FACE('',(#270954),#270979,.F.); +#270954 = FACE_BOUND('',#270955,.F.); +#270955 = EDGE_LOOP('',(#270956,#270957,#270965,#270973)); +#270956 = ORIENTED_EDGE('',*,*,#270935,.T.); +#270957 = ORIENTED_EDGE('',*,*,#270958,.T.); +#270958 = EDGE_CURVE('',#270928,#270959,#270961,.T.); +#270959 = VERTEX_POINT('',#270960); +#270960 = CARTESIAN_POINT('',(128.498079,-97.9506,-3.5E-02)); +#270961 = LINE('',#270962,#270963); +#270962 = CARTESIAN_POINT('',(128.5,-82.641422,-3.5E-02)); +#270963 = VECTOR('',#270964,1.); +#270964 = DIRECTION('',(-1.254802828007E-04,-0.999999992127,0.)); +#270965 = ORIENTED_EDGE('',*,*,#270966,.F.); +#270966 = EDGE_CURVE('',#270967,#270959,#270969,.T.); +#270967 = VERTEX_POINT('',#270968); +#270968 = CARTESIAN_POINT('',(128.498079,-97.9506,0.)); +#270969 = LINE('',#270970,#270971); +#270970 = CARTESIAN_POINT('',(128.498079,-97.9506,0.)); +#270971 = VECTOR('',#270972,1.); +#270972 = DIRECTION('',(0.,0.,-1.)); +#270973 = ORIENTED_EDGE('',*,*,#270974,.F.); +#270974 = EDGE_CURVE('',#270936,#270967,#270975,.T.); +#270975 = LINE('',#270976,#270977); +#270976 = CARTESIAN_POINT('',(128.5,-82.641422,0.)); +#270977 = VECTOR('',#270978,1.); +#270978 = DIRECTION('',(-1.254802828007E-04,-0.999999992127,0.)); +#270979 = PLANE('',#270980); +#270980 = AXIS2_PLACEMENT_3D('',#270981,#270982,#270983); +#270981 = CARTESIAN_POINT('',(128.5,-82.641422,0.)); +#270982 = DIRECTION('',(-0.999999992127,1.254802828007E-04,0.)); +#270983 = DIRECTION('',(-1.254802828007E-04,-0.999999992127,0.)); +#270984 = ADVANCED_FACE('',(#270985),#271010,.F.); +#270985 = FACE_BOUND('',#270986,.F.); +#270986 = EDGE_LOOP('',(#270987,#270988,#270996,#271004)); +#270987 = ORIENTED_EDGE('',*,*,#270966,.T.); +#270988 = ORIENTED_EDGE('',*,*,#270989,.T.); +#270989 = EDGE_CURVE('',#270959,#270990,#270992,.T.); +#270990 = VERTEX_POINT('',#270991); +#270991 = CARTESIAN_POINT('',(128.483147,-97.986649,-3.5E-02)); +#270992 = LINE('',#270993,#270994); +#270993 = CARTESIAN_POINT('',(128.498079,-97.9506,-3.5E-02)); +#270994 = VECTOR('',#270995,1.); +#270995 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#270996 = ORIENTED_EDGE('',*,*,#270997,.F.); +#270997 = EDGE_CURVE('',#270998,#270990,#271000,.T.); +#270998 = VERTEX_POINT('',#270999); +#270999 = CARTESIAN_POINT('',(128.483147,-97.986649,0.)); +#271000 = LINE('',#271001,#271002); +#271001 = CARTESIAN_POINT('',(128.483147,-97.986649,0.)); +#271002 = VECTOR('',#271003,1.); +#271003 = DIRECTION('',(0.,0.,-1.)); +#271004 = ORIENTED_EDGE('',*,*,#271005,.F.); +#271005 = EDGE_CURVE('',#270967,#270998,#271006,.T.); +#271006 = LINE('',#271007,#271008); +#271007 = CARTESIAN_POINT('',(128.498079,-97.9506,0.)); +#271008 = VECTOR('',#271009,1.); +#271009 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#271010 = PLANE('',#271011); +#271011 = AXIS2_PLACEMENT_3D('',#271012,#271013,#271014); +#271012 = CARTESIAN_POINT('',(128.498079,-97.9506,0.)); +#271013 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#271014 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#271015 = ADVANCED_FACE('',(#271016),#271041,.F.); +#271016 = FACE_BOUND('',#271017,.F.); +#271017 = EDGE_LOOP('',(#271018,#271019,#271027,#271035)); +#271018 = ORIENTED_EDGE('',*,*,#270997,.T.); +#271019 = ORIENTED_EDGE('',*,*,#271020,.T.); +#271020 = EDGE_CURVE('',#270990,#271021,#271023,.T.); +#271021 = VERTEX_POINT('',#271022); +#271022 = CARTESIAN_POINT('',(126.4,-100.072512,-3.5E-02)); +#271023 = LINE('',#271024,#271025); +#271024 = CARTESIAN_POINT('',(128.483147,-97.986649,-3.5E-02)); +#271025 = VECTOR('',#271026,1.); +#271026 = DIRECTION('',(-0.706645969822,-0.707567292443,0.)); +#271027 = ORIENTED_EDGE('',*,*,#271028,.F.); +#271028 = EDGE_CURVE('',#271029,#271021,#271031,.T.); +#271029 = VERTEX_POINT('',#271030); +#271030 = CARTESIAN_POINT('',(126.4,-100.072512,0.)); +#271031 = LINE('',#271032,#271033); +#271032 = CARTESIAN_POINT('',(126.4,-100.072512,0.)); +#271033 = VECTOR('',#271034,1.); +#271034 = DIRECTION('',(0.,0.,-1.)); +#271035 = ORIENTED_EDGE('',*,*,#271036,.F.); +#271036 = EDGE_CURVE('',#270998,#271029,#271037,.T.); +#271037 = LINE('',#271038,#271039); +#271038 = CARTESIAN_POINT('',(128.483147,-97.986649,0.)); +#271039 = VECTOR('',#271040,1.); +#271040 = DIRECTION('',(-0.706645969822,-0.707567292443,0.)); +#271041 = PLANE('',#271042); +#271042 = AXIS2_PLACEMENT_3D('',#271043,#271044,#271045); +#271043 = CARTESIAN_POINT('',(128.483147,-97.986649,0.)); +#271044 = DIRECTION('',(-0.707567292443,0.706645969822,0.)); +#271045 = DIRECTION('',(-0.706645969822,-0.707567292443,0.)); +#271046 = ADVANCED_FACE('',(#271047),#271072,.F.); +#271047 = FACE_BOUND('',#271048,.F.); +#271048 = EDGE_LOOP('',(#271049,#271050,#271058,#271066)); +#271049 = ORIENTED_EDGE('',*,*,#271028,.T.); +#271050 = ORIENTED_EDGE('',*,*,#271051,.T.); +#271051 = EDGE_CURVE('',#271021,#271052,#271054,.T.); +#271052 = VERTEX_POINT('',#271053); +#271053 = CARTESIAN_POINT('',(126.4,-100.258578,-3.5E-02)); +#271054 = LINE('',#271055,#271056); +#271055 = CARTESIAN_POINT('',(126.4,-100.072512,-3.5E-02)); +#271056 = VECTOR('',#271057,1.); +#271057 = DIRECTION('',(0.,-1.,0.)); +#271058 = ORIENTED_EDGE('',*,*,#271059,.F.); +#271059 = EDGE_CURVE('',#271060,#271052,#271062,.T.); +#271060 = VERTEX_POINT('',#271061); +#271061 = CARTESIAN_POINT('',(126.4,-100.258578,0.)); +#271062 = LINE('',#271063,#271064); +#271063 = CARTESIAN_POINT('',(126.4,-100.258578,0.)); +#271064 = VECTOR('',#271065,1.); +#271065 = DIRECTION('',(0.,0.,-1.)); +#271066 = ORIENTED_EDGE('',*,*,#271067,.F.); +#271067 = EDGE_CURVE('',#271029,#271060,#271068,.T.); +#271068 = LINE('',#271069,#271070); +#271069 = CARTESIAN_POINT('',(126.4,-100.072512,0.)); +#271070 = VECTOR('',#271071,1.); +#271071 = DIRECTION('',(0.,-1.,0.)); +#271072 = PLANE('',#271073); +#271073 = AXIS2_PLACEMENT_3D('',#271074,#271075,#271076); +#271074 = CARTESIAN_POINT('',(126.4,-100.072512,0.)); +#271075 = DIRECTION('',(-1.,-0.,-0.)); +#271076 = DIRECTION('',(0.,-1.,0.)); +#271077 = ADVANCED_FACE('',(#271078),#271103,.F.); +#271078 = FACE_BOUND('',#271079,.F.); +#271079 = EDGE_LOOP('',(#271080,#271081,#271089,#271097)); +#271080 = ORIENTED_EDGE('',*,*,#271059,.T.); +#271081 = ORIENTED_EDGE('',*,*,#271082,.T.); +#271082 = EDGE_CURVE('',#271052,#271083,#271085,.T.); +#271083 = VERTEX_POINT('',#271084); +#271084 = CARTESIAN_POINT('',(128.446185,-102.304764,-3.5E-02)); +#271085 = LINE('',#271086,#271087); +#271086 = CARTESIAN_POINT('',(126.4,-100.258578,-3.5E-02)); +#271087 = VECTOR('',#271088,1.); +#271088 = DIRECTION('',(0.7071066084,-0.707106953973,0.)); +#271089 = ORIENTED_EDGE('',*,*,#271090,.F.); +#271090 = EDGE_CURVE('',#271091,#271083,#271093,.T.); +#271091 = VERTEX_POINT('',#271092); +#271092 = CARTESIAN_POINT('',(128.446185,-102.304764,0.)); +#271093 = LINE('',#271094,#271095); +#271094 = CARTESIAN_POINT('',(128.446185,-102.304764,0.)); +#271095 = VECTOR('',#271096,1.); +#271096 = DIRECTION('',(0.,0.,-1.)); +#271097 = ORIENTED_EDGE('',*,*,#271098,.F.); +#271098 = EDGE_CURVE('',#271060,#271091,#271099,.T.); +#271099 = LINE('',#271100,#271101); +#271100 = CARTESIAN_POINT('',(126.4,-100.258578,0.)); +#271101 = VECTOR('',#271102,1.); +#271102 = DIRECTION('',(0.7071066084,-0.707106953973,0.)); +#271103 = PLANE('',#271104); +#271104 = AXIS2_PLACEMENT_3D('',#271105,#271106,#271107); +#271105 = CARTESIAN_POINT('',(126.4,-100.258578,0.)); +#271106 = DIRECTION('',(-0.707106953973,-0.7071066084,-0.)); +#271107 = DIRECTION('',(0.7071066084,-0.707106953973,0.)); +#271108 = ADVANCED_FACE('',(#271109),#271134,.F.); +#271109 = FACE_BOUND('',#271110,.F.); +#271110 = EDGE_LOOP('',(#271111,#271112,#271120,#271128)); +#271111 = ORIENTED_EDGE('',*,*,#271090,.T.); +#271112 = ORIENTED_EDGE('',*,*,#271113,.T.); +#271113 = EDGE_CURVE('',#271083,#271114,#271116,.T.); +#271114 = VERTEX_POINT('',#271115); +#271115 = CARTESIAN_POINT('',(128.45946,-102.297101,-3.5E-02)); +#271116 = LINE('',#271117,#271118); +#271117 = CARTESIAN_POINT('',(128.446185,-102.304764,-3.5E-02)); +#271118 = VECTOR('',#271119,1.); +#271119 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#271120 = ORIENTED_EDGE('',*,*,#271121,.F.); +#271121 = EDGE_CURVE('',#271122,#271114,#271124,.T.); +#271122 = VERTEX_POINT('',#271123); +#271123 = CARTESIAN_POINT('',(128.45946,-102.297101,0.)); +#271124 = LINE('',#271125,#271126); +#271125 = CARTESIAN_POINT('',(128.45946,-102.297101,0.)); +#271126 = VECTOR('',#271127,1.); +#271127 = DIRECTION('',(0.,0.,-1.)); +#271128 = ORIENTED_EDGE('',*,*,#271129,.F.); +#271129 = EDGE_CURVE('',#271091,#271122,#271130,.T.); +#271130 = LINE('',#271131,#271132); +#271131 = CARTESIAN_POINT('',(128.446185,-102.304764,0.)); +#271132 = VECTOR('',#271133,1.); +#271133 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#271134 = PLANE('',#271135); +#271135 = AXIS2_PLACEMENT_3D('',#271136,#271137,#271138); +#271136 = CARTESIAN_POINT('',(128.446185,-102.304764,0.)); +#271137 = DIRECTION('',(0.49993517485,-0.866062827368,0.)); +#271138 = DIRECTION('',(0.866062827368,0.49993517485,0.)); +#271139 = ADVANCED_FACE('',(#271140),#271167,.T.); +#271140 = FACE_BOUND('',#271141,.F.); +#271141 = EDGE_LOOP('',(#271142,#271143,#271152,#271160)); +#271142 = ORIENTED_EDGE('',*,*,#271121,.T.); +#271143 = ORIENTED_EDGE('',*,*,#271144,.T.); +#271144 = EDGE_CURVE('',#271114,#271145,#271147,.T.); +#271145 = VERTEX_POINT('',#271146); +#271146 = CARTESIAN_POINT('',(128.297101,-102.45946,-3.5E-02)); +#271147 = CIRCLE('',#271148,0.299999934501); +#271148 = AXIS2_PLACEMENT_3D('',#271149,#271150,#271151); +#271149 = CARTESIAN_POINT('',(128.5742648594,-102.5742648594,-3.5E-02)); +#271150 = DIRECTION('',(-0.,0.,-1.)); +#271151 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#271152 = ORIENTED_EDGE('',*,*,#271153,.F.); +#271153 = EDGE_CURVE('',#271154,#271145,#271156,.T.); +#271154 = VERTEX_POINT('',#271155); +#271155 = CARTESIAN_POINT('',(128.297101,-102.45946,0.)); +#271156 = LINE('',#271157,#271158); +#271157 = CARTESIAN_POINT('',(128.297101,-102.45946,0.)); +#271158 = VECTOR('',#271159,1.); +#271159 = DIRECTION('',(0.,0.,-1.)); +#271160 = ORIENTED_EDGE('',*,*,#271161,.F.); +#271161 = EDGE_CURVE('',#271122,#271154,#271162,.T.); +#271162 = CIRCLE('',#271163,0.299999934501); +#271163 = AXIS2_PLACEMENT_3D('',#271164,#271165,#271166); +#271164 = CARTESIAN_POINT('',(128.5742648594,-102.5742648594,0.)); +#271165 = DIRECTION('',(-0.,0.,-1.)); +#271166 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#271167 = CYLINDRICAL_SURFACE('',#271168,0.299999934501); +#271168 = AXIS2_PLACEMENT_3D('',#271169,#271170,#271171); +#271169 = CARTESIAN_POINT('',(128.5742648594,-102.5742648594,0.)); +#271170 = DIRECTION('',(0.,-0.,1.)); +#271171 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#271172 = ADVANCED_FACE('',(#271173),#271198,.F.); +#271173 = FACE_BOUND('',#271174,.F.); +#271174 = EDGE_LOOP('',(#271175,#271176,#271184,#271192)); +#271175 = ORIENTED_EDGE('',*,*,#271153,.T.); +#271176 = ORIENTED_EDGE('',*,*,#271177,.T.); +#271177 = EDGE_CURVE('',#271145,#271178,#271180,.T.); +#271178 = VERTEX_POINT('',#271179); +#271179 = CARTESIAN_POINT('',(128.304764,-102.446185,-3.5E-02)); +#271180 = LINE('',#271181,#271182); +#271181 = CARTESIAN_POINT('',(128.297101,-102.45946,-3.5E-02)); +#271182 = VECTOR('',#271183,1.); +#271183 = DIRECTION('',(0.499935174849,0.866062827368,0.)); +#271184 = ORIENTED_EDGE('',*,*,#271185,.F.); +#271185 = EDGE_CURVE('',#271186,#271178,#271188,.T.); +#271186 = VERTEX_POINT('',#271187); +#271187 = CARTESIAN_POINT('',(128.304764,-102.446185,0.)); +#271188 = LINE('',#271189,#271190); +#271189 = CARTESIAN_POINT('',(128.304764,-102.446185,0.)); +#271190 = VECTOR('',#271191,1.); +#271191 = DIRECTION('',(0.,0.,-1.)); +#271192 = ORIENTED_EDGE('',*,*,#271193,.F.); +#271193 = EDGE_CURVE('',#271154,#271186,#271194,.T.); +#271194 = LINE('',#271195,#271196); +#271195 = CARTESIAN_POINT('',(128.297101,-102.45946,0.)); +#271196 = VECTOR('',#271197,1.); +#271197 = DIRECTION('',(0.499935174849,0.866062827368,0.)); +#271198 = PLANE('',#271199); +#271199 = AXIS2_PLACEMENT_3D('',#271200,#271201,#271202); +#271200 = CARTESIAN_POINT('',(128.297101,-102.45946,0.)); +#271201 = DIRECTION('',(0.866062827368,-0.499935174849,0.)); +#271202 = DIRECTION('',(0.499935174849,0.866062827368,0.)); +#271203 = ADVANCED_FACE('',(#271204),#271229,.F.); +#271204 = FACE_BOUND('',#271205,.F.); +#271205 = EDGE_LOOP('',(#271206,#271207,#271215,#271223)); +#271206 = ORIENTED_EDGE('',*,*,#271185,.T.); +#271207 = ORIENTED_EDGE('',*,*,#271208,.T.); +#271208 = EDGE_CURVE('',#271178,#271209,#271211,.T.); +#271209 = VERTEX_POINT('',#271210); +#271210 = CARTESIAN_POINT('',(126.216853,-100.355557,-3.5E-02)); +#271211 = LINE('',#271212,#271213); +#271212 = CARTESIAN_POINT('',(128.304764,-102.446185,-3.5E-02)); +#271213 = VECTOR('',#271214,1.); +#271214 = DIRECTION('',(-0.706646851692,0.707566411719,0.)); +#271215 = ORIENTED_EDGE('',*,*,#271216,.F.); +#271216 = EDGE_CURVE('',#271217,#271209,#271219,.T.); +#271217 = VERTEX_POINT('',#271218); +#271218 = CARTESIAN_POINT('',(126.216853,-100.355557,0.)); +#271219 = LINE('',#271220,#271221); +#271220 = CARTESIAN_POINT('',(126.216853,-100.355557,0.)); +#271221 = VECTOR('',#271222,1.); +#271222 = DIRECTION('',(0.,0.,-1.)); +#271223 = ORIENTED_EDGE('',*,*,#271224,.F.); +#271224 = EDGE_CURVE('',#271186,#271217,#271225,.T.); +#271225 = LINE('',#271226,#271227); +#271226 = CARTESIAN_POINT('',(128.304764,-102.446185,0.)); +#271227 = VECTOR('',#271228,1.); +#271228 = DIRECTION('',(-0.706646851692,0.707566411719,0.)); +#271229 = PLANE('',#271230); +#271230 = AXIS2_PLACEMENT_3D('',#271231,#271232,#271233); +#271231 = CARTESIAN_POINT('',(128.304764,-102.446185,0.)); +#271232 = DIRECTION('',(0.707566411719,0.706646851692,0.)); +#271233 = DIRECTION('',(-0.706646851692,0.707566411719,0.)); +#271234 = ADVANCED_FACE('',(#271235),#271260,.F.); +#271235 = FACE_BOUND('',#271236,.F.); +#271236 = EDGE_LOOP('',(#271237,#271238,#271246,#271254)); +#271237 = ORIENTED_EDGE('',*,*,#271216,.T.); +#271238 = ORIENTED_EDGE('',*,*,#271239,.T.); +#271239 = EDGE_CURVE('',#271209,#271240,#271242,.T.); +#271240 = VERTEX_POINT('',#271241); +#271241 = CARTESIAN_POINT('',(126.201921,-100.319509,-3.5E-02)); +#271242 = LINE('',#271243,#271244); +#271243 = CARTESIAN_POINT('',(126.216853,-100.355557,-3.5E-02)); +#271244 = VECTOR('',#271245,1.); +#271245 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#271246 = ORIENTED_EDGE('',*,*,#271247,.F.); +#271247 = EDGE_CURVE('',#271248,#271240,#271250,.T.); +#271248 = VERTEX_POINT('',#271249); +#271249 = CARTESIAN_POINT('',(126.201921,-100.319509,0.)); +#271250 = LINE('',#271251,#271252); +#271251 = CARTESIAN_POINT('',(126.201921,-100.319509,0.)); +#271252 = VECTOR('',#271253,1.); +#271253 = DIRECTION('',(0.,0.,-1.)); +#271254 = ORIENTED_EDGE('',*,*,#271255,.F.); +#271255 = EDGE_CURVE('',#271217,#271248,#271256,.T.); +#271256 = LINE('',#271257,#271258); +#271257 = CARTESIAN_POINT('',(126.216853,-100.355557,0.)); +#271258 = VECTOR('',#271259,1.); +#271259 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#271260 = PLANE('',#271261); +#271261 = AXIS2_PLACEMENT_3D('',#271262,#271263,#271264); +#271262 = CARTESIAN_POINT('',(126.216853,-100.355557,0.)); +#271263 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#271264 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#271265 = ADVANCED_FACE('',(#271266),#271291,.F.); +#271266 = FACE_BOUND('',#271267,.F.); +#271267 = EDGE_LOOP('',(#271268,#271269,#271277,#271285)); +#271268 = ORIENTED_EDGE('',*,*,#271247,.T.); +#271269 = ORIENTED_EDGE('',*,*,#271270,.T.); +#271270 = EDGE_CURVE('',#271240,#271271,#271273,.T.); +#271271 = VERTEX_POINT('',#271272); +#271272 = CARTESIAN_POINT('',(126.201921,-100.011582,-3.5E-02)); +#271273 = LINE('',#271274,#271275); +#271274 = CARTESIAN_POINT('',(126.201921,-100.319509,-3.5E-02)); +#271275 = VECTOR('',#271276,1.); +#271276 = DIRECTION('',(0.,1.,0.)); +#271277 = ORIENTED_EDGE('',*,*,#271278,.F.); +#271278 = EDGE_CURVE('',#271279,#271271,#271281,.T.); +#271279 = VERTEX_POINT('',#271280); +#271280 = CARTESIAN_POINT('',(126.201921,-100.011582,0.)); +#271281 = LINE('',#271282,#271283); +#271282 = CARTESIAN_POINT('',(126.201921,-100.011582,0.)); +#271283 = VECTOR('',#271284,1.); +#271284 = DIRECTION('',(0.,0.,-1.)); +#271285 = ORIENTED_EDGE('',*,*,#271286,.F.); +#271286 = EDGE_CURVE('',#271248,#271279,#271287,.T.); +#271287 = LINE('',#271288,#271289); +#271288 = CARTESIAN_POINT('',(126.201921,-100.319509,0.)); +#271289 = VECTOR('',#271290,1.); +#271290 = DIRECTION('',(0.,1.,0.)); +#271291 = PLANE('',#271292); +#271292 = AXIS2_PLACEMENT_3D('',#271293,#271294,#271295); +#271293 = CARTESIAN_POINT('',(126.201921,-100.319509,0.)); +#271294 = DIRECTION('',(1.,-0.,0.)); +#271295 = DIRECTION('',(0.,1.,0.)); +#271296 = ADVANCED_FACE('',(#271297),#271322,.F.); +#271297 = FACE_BOUND('',#271298,.F.); +#271298 = EDGE_LOOP('',(#271299,#271300,#271308,#271316)); +#271299 = ORIENTED_EDGE('',*,*,#271278,.T.); +#271300 = ORIENTED_EDGE('',*,*,#271301,.T.); +#271301 = EDGE_CURVE('',#271271,#271302,#271304,.T.); +#271302 = VERTEX_POINT('',#271303); +#271303 = CARTESIAN_POINT('',(126.216853,-99.975534,-3.5E-02)); +#271304 = LINE('',#271305,#271306); +#271305 = CARTESIAN_POINT('',(126.201921,-100.011582,-3.5E-02)); +#271306 = VECTOR('',#271307,1.); +#271307 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271308 = ORIENTED_EDGE('',*,*,#271309,.F.); +#271309 = EDGE_CURVE('',#271310,#271302,#271312,.T.); +#271310 = VERTEX_POINT('',#271311); +#271311 = CARTESIAN_POINT('',(126.216853,-99.975534,0.)); +#271312 = LINE('',#271313,#271314); +#271313 = CARTESIAN_POINT('',(126.216853,-99.975534,0.)); +#271314 = VECTOR('',#271315,1.); +#271315 = DIRECTION('',(0.,0.,-1.)); +#271316 = ORIENTED_EDGE('',*,*,#271317,.F.); +#271317 = EDGE_CURVE('',#271279,#271310,#271318,.T.); +#271318 = LINE('',#271319,#271320); +#271319 = CARTESIAN_POINT('',(126.201921,-100.011582,0.)); +#271320 = VECTOR('',#271321,1.); +#271321 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271322 = PLANE('',#271323); +#271323 = AXIS2_PLACEMENT_3D('',#271324,#271325,#271326); +#271324 = CARTESIAN_POINT('',(126.201921,-100.011582,0.)); +#271325 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#271326 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271327 = ADVANCED_FACE('',(#271328),#271353,.F.); +#271328 = FACE_BOUND('',#271329,.F.); +#271329 = EDGE_LOOP('',(#271330,#271331,#271339,#271347)); +#271330 = ORIENTED_EDGE('',*,*,#271309,.T.); +#271331 = ORIENTED_EDGE('',*,*,#271332,.T.); +#271332 = EDGE_CURVE('',#271302,#271333,#271335,.T.); +#271333 = VERTEX_POINT('',#271334); +#271334 = CARTESIAN_POINT('',(128.3,-97.889669,-3.5E-02)); +#271335 = LINE('',#271336,#271337); +#271336 = CARTESIAN_POINT('',(126.216853,-99.975534,-3.5E-02)); +#271337 = VECTOR('',#271338,1.); +#271338 = DIRECTION('',(0.706645630602,0.707567631221,0.)); +#271339 = ORIENTED_EDGE('',*,*,#271340,.F.); +#271340 = EDGE_CURVE('',#271341,#271333,#271343,.T.); +#271341 = VERTEX_POINT('',#271342); +#271342 = CARTESIAN_POINT('',(128.3,-97.889669,0.)); +#271343 = LINE('',#271344,#271345); +#271344 = CARTESIAN_POINT('',(128.3,-97.889669,0.)); +#271345 = VECTOR('',#271346,1.); +#271346 = DIRECTION('',(0.,0.,-1.)); +#271347 = ORIENTED_EDGE('',*,*,#271348,.F.); +#271348 = EDGE_CURVE('',#271310,#271341,#271349,.T.); +#271349 = LINE('',#271350,#271351); +#271350 = CARTESIAN_POINT('',(126.216853,-99.975534,0.)); +#271351 = VECTOR('',#271352,1.); +#271352 = DIRECTION('',(0.706645630602,0.707567631221,0.)); +#271353 = PLANE('',#271354); +#271354 = AXIS2_PLACEMENT_3D('',#271355,#271356,#271357); +#271355 = CARTESIAN_POINT('',(126.216853,-99.975534,0.)); +#271356 = DIRECTION('',(0.707567631221,-0.706645630602,0.)); +#271357 = DIRECTION('',(0.706645630602,0.707567631221,0.)); +#271358 = ADVANCED_FACE('',(#271359),#271384,.F.); +#271359 = FACE_BOUND('',#271360,.F.); +#271360 = EDGE_LOOP('',(#271361,#271362,#271370,#271378)); +#271361 = ORIENTED_EDGE('',*,*,#271340,.T.); +#271362 = ORIENTED_EDGE('',*,*,#271363,.T.); +#271363 = EDGE_CURVE('',#271333,#271364,#271366,.T.); +#271364 = VERTEX_POINT('',#271365); +#271365 = CARTESIAN_POINT('',(128.301921,-82.580491,-3.5E-02)); +#271366 = LINE('',#271367,#271368); +#271367 = CARTESIAN_POINT('',(128.3,-97.889669,-3.5E-02)); +#271368 = VECTOR('',#271369,1.); +#271369 = DIRECTION('',(1.254802827989E-04,0.999999992127,0.)); +#271370 = ORIENTED_EDGE('',*,*,#271371,.F.); +#271371 = EDGE_CURVE('',#271372,#271364,#271374,.T.); +#271372 = VERTEX_POINT('',#271373); +#271373 = CARTESIAN_POINT('',(128.301921,-82.580491,0.)); +#271374 = LINE('',#271375,#271376); +#271375 = CARTESIAN_POINT('',(128.301921,-82.580491,0.)); +#271376 = VECTOR('',#271377,1.); +#271377 = DIRECTION('',(0.,0.,-1.)); +#271378 = ORIENTED_EDGE('',*,*,#271379,.F.); +#271379 = EDGE_CURVE('',#271341,#271372,#271380,.T.); +#271380 = LINE('',#271381,#271382); +#271381 = CARTESIAN_POINT('',(128.3,-97.889669,0.)); +#271382 = VECTOR('',#271383,1.); +#271383 = DIRECTION('',(1.254802827989E-04,0.999999992127,0.)); +#271384 = PLANE('',#271385); +#271385 = AXIS2_PLACEMENT_3D('',#271386,#271387,#271388); +#271386 = CARTESIAN_POINT('',(128.3,-97.889669,0.)); +#271387 = DIRECTION('',(0.999999992127,-1.254802827989E-04,0.)); +#271388 = DIRECTION('',(1.254802827989E-04,0.999999992127,0.)); +#271389 = ADVANCED_FACE('',(#271390),#271415,.F.); +#271390 = FACE_BOUND('',#271391,.F.); +#271391 = EDGE_LOOP('',(#271392,#271393,#271401,#271409)); +#271392 = ORIENTED_EDGE('',*,*,#271371,.T.); +#271393 = ORIENTED_EDGE('',*,*,#271394,.T.); +#271394 = EDGE_CURVE('',#271364,#271395,#271397,.T.); +#271395 = VERTEX_POINT('',#271396); +#271396 = CARTESIAN_POINT('',(128.316853,-82.544443,-3.5E-02)); +#271397 = LINE('',#271398,#271399); +#271398 = CARTESIAN_POINT('',(128.301921,-82.580491,-3.5E-02)); +#271399 = VECTOR('',#271400,1.); +#271400 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271401 = ORIENTED_EDGE('',*,*,#271402,.F.); +#271402 = EDGE_CURVE('',#271403,#271395,#271405,.T.); +#271403 = VERTEX_POINT('',#271404); +#271404 = CARTESIAN_POINT('',(128.316853,-82.544443,0.)); +#271405 = LINE('',#271406,#271407); +#271406 = CARTESIAN_POINT('',(128.316853,-82.544443,0.)); +#271407 = VECTOR('',#271408,1.); +#271408 = DIRECTION('',(0.,0.,-1.)); +#271409 = ORIENTED_EDGE('',*,*,#271410,.F.); +#271410 = EDGE_CURVE('',#271372,#271403,#271411,.T.); +#271411 = LINE('',#271412,#271413); +#271412 = CARTESIAN_POINT('',(128.301921,-82.580491,0.)); +#271413 = VECTOR('',#271414,1.); +#271414 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271415 = PLANE('',#271416); +#271416 = AXIS2_PLACEMENT_3D('',#271417,#271418,#271419); +#271417 = CARTESIAN_POINT('',(128.301921,-82.580491,0.)); +#271418 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#271419 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271420 = ADVANCED_FACE('',(#271421),#271446,.F.); +#271421 = FACE_BOUND('',#271422,.F.); +#271422 = EDGE_LOOP('',(#271423,#271424,#271432,#271440)); +#271423 = ORIENTED_EDGE('',*,*,#271402,.T.); +#271424 = ORIENTED_EDGE('',*,*,#271425,.T.); +#271425 = EDGE_CURVE('',#271395,#271426,#271428,.T.); +#271426 = VERTEX_POINT('',#271427); +#271427 = CARTESIAN_POINT('',(130.5,-80.358578,-3.5E-02)); +#271428 = LINE('',#271429,#271430); +#271429 = CARTESIAN_POINT('',(128.316853,-82.544443,-3.5E-02)); +#271430 = VECTOR('',#271431,1.); +#271431 = DIRECTION('',(0.70666674722,0.707546541489,0.)); +#271432 = ORIENTED_EDGE('',*,*,#271433,.F.); +#271433 = EDGE_CURVE('',#271434,#271426,#271436,.T.); +#271434 = VERTEX_POINT('',#271435); +#271435 = CARTESIAN_POINT('',(130.5,-80.358578,0.)); +#271436 = LINE('',#271437,#271438); +#271437 = CARTESIAN_POINT('',(130.5,-80.358578,0.)); +#271438 = VECTOR('',#271439,1.); +#271439 = DIRECTION('',(0.,0.,-1.)); +#271440 = ORIENTED_EDGE('',*,*,#271441,.F.); +#271441 = EDGE_CURVE('',#271403,#271434,#271442,.T.); +#271442 = LINE('',#271443,#271444); +#271443 = CARTESIAN_POINT('',(128.316853,-82.544443,0.)); +#271444 = VECTOR('',#271445,1.); +#271445 = DIRECTION('',(0.70666674722,0.707546541489,0.)); +#271446 = PLANE('',#271447); +#271447 = AXIS2_PLACEMENT_3D('',#271448,#271449,#271450); +#271448 = CARTESIAN_POINT('',(128.316853,-82.544443,0.)); +#271449 = DIRECTION('',(0.707546541489,-0.70666674722,0.)); +#271450 = DIRECTION('',(0.70666674722,0.707546541489,0.)); +#271451 = ADVANCED_FACE('',(#271452),#271477,.F.); +#271452 = FACE_BOUND('',#271453,.F.); +#271453 = EDGE_LOOP('',(#271454,#271455,#271463,#271471)); +#271454 = ORIENTED_EDGE('',*,*,#271433,.T.); +#271455 = ORIENTED_EDGE('',*,*,#271456,.T.); +#271456 = EDGE_CURVE('',#271426,#271457,#271459,.T.); +#271457 = VERTEX_POINT('',#271458); +#271458 = CARTESIAN_POINT('',(130.501921,-79.080491,-3.5E-02)); +#271459 = LINE('',#271460,#271461); +#271460 = CARTESIAN_POINT('',(130.5,-80.358578,-3.5E-02)); +#271461 = VECTOR('',#271462,1.); +#271462 = DIRECTION('',(1.503025873948E-03,0.999998870456,0.)); +#271463 = ORIENTED_EDGE('',*,*,#271464,.F.); +#271464 = EDGE_CURVE('',#271465,#271457,#271467,.T.); +#271465 = VERTEX_POINT('',#271466); +#271466 = CARTESIAN_POINT('',(130.501921,-79.080491,0.)); +#271467 = LINE('',#271468,#271469); +#271468 = CARTESIAN_POINT('',(130.501921,-79.080491,0.)); +#271469 = VECTOR('',#271470,1.); +#271470 = DIRECTION('',(0.,0.,-1.)); +#271471 = ORIENTED_EDGE('',*,*,#271472,.F.); +#271472 = EDGE_CURVE('',#271434,#271465,#271473,.T.); +#271473 = LINE('',#271474,#271475); +#271474 = CARTESIAN_POINT('',(130.5,-80.358578,0.)); +#271475 = VECTOR('',#271476,1.); +#271476 = DIRECTION('',(1.503025873948E-03,0.999998870456,0.)); +#271477 = PLANE('',#271478); +#271478 = AXIS2_PLACEMENT_3D('',#271479,#271480,#271481); +#271479 = CARTESIAN_POINT('',(130.5,-80.358578,0.)); +#271480 = DIRECTION('',(0.999998870456,-1.503025873948E-03,0.)); +#271481 = DIRECTION('',(1.503025873948E-03,0.999998870456,0.)); +#271482 = ADVANCED_FACE('',(#271483),#271508,.F.); +#271483 = FACE_BOUND('',#271484,.F.); +#271484 = EDGE_LOOP('',(#271485,#271486,#271494,#271502)); +#271485 = ORIENTED_EDGE('',*,*,#271464,.T.); +#271486 = ORIENTED_EDGE('',*,*,#271487,.T.); +#271487 = EDGE_CURVE('',#271457,#271488,#271490,.T.); +#271488 = VERTEX_POINT('',#271489); +#271489 = CARTESIAN_POINT('',(130.516853,-79.044443,-3.5E-02)); +#271490 = LINE('',#271491,#271492); +#271491 = CARTESIAN_POINT('',(130.501921,-79.080491,-3.5E-02)); +#271492 = VECTOR('',#271493,1.); +#271493 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271494 = ORIENTED_EDGE('',*,*,#271495,.F.); +#271495 = EDGE_CURVE('',#271496,#271488,#271498,.T.); +#271496 = VERTEX_POINT('',#271497); +#271497 = CARTESIAN_POINT('',(130.516853,-79.044443,0.)); +#271498 = LINE('',#271499,#271500); +#271499 = CARTESIAN_POINT('',(130.516853,-79.044443,0.)); +#271500 = VECTOR('',#271501,1.); +#271501 = DIRECTION('',(0.,0.,-1.)); +#271502 = ORIENTED_EDGE('',*,*,#271503,.F.); +#271503 = EDGE_CURVE('',#271465,#271496,#271504,.T.); +#271504 = LINE('',#271505,#271506); +#271505 = CARTESIAN_POINT('',(130.501921,-79.080491,0.)); +#271506 = VECTOR('',#271507,1.); +#271507 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271508 = PLANE('',#271509); +#271509 = AXIS2_PLACEMENT_3D('',#271510,#271511,#271512); +#271510 = CARTESIAN_POINT('',(130.501921,-79.080491,0.)); +#271511 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#271512 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#271513 = ADVANCED_FACE('',(#271514),#271539,.F.); +#271514 = FACE_BOUND('',#271515,.F.); +#271515 = EDGE_LOOP('',(#271516,#271517,#271525,#271533)); +#271516 = ORIENTED_EDGE('',*,*,#271495,.T.); +#271517 = ORIENTED_EDGE('',*,*,#271518,.T.); +#271518 = EDGE_CURVE('',#271488,#271519,#271521,.T.); +#271519 = VERTEX_POINT('',#271520); +#271520 = CARTESIAN_POINT('',(131.45,-78.108578,-3.5E-02)); +#271521 = LINE('',#271522,#271523); +#271522 = CARTESIAN_POINT('',(130.516853,-79.044443,-3.5E-02)); +#271523 = VECTOR('',#271524,1.); +#271524 = DIRECTION('',(0.706077728583,0.708134338384,0.)); +#271525 = ORIENTED_EDGE('',*,*,#271526,.F.); +#271526 = EDGE_CURVE('',#271527,#271519,#271529,.T.); +#271527 = VERTEX_POINT('',#271528); +#271528 = CARTESIAN_POINT('',(131.45,-78.108578,0.)); +#271529 = LINE('',#271530,#271531); +#271530 = CARTESIAN_POINT('',(131.45,-78.108578,0.)); +#271531 = VECTOR('',#271532,1.); +#271532 = DIRECTION('',(0.,0.,-1.)); +#271533 = ORIENTED_EDGE('',*,*,#271534,.F.); +#271534 = EDGE_CURVE('',#271496,#271527,#271535,.T.); +#271535 = LINE('',#271536,#271537); +#271536 = CARTESIAN_POINT('',(130.516853,-79.044443,0.)); +#271537 = VECTOR('',#271538,1.); +#271538 = DIRECTION('',(0.706077728583,0.708134338384,0.)); +#271539 = PLANE('',#271540); +#271540 = AXIS2_PLACEMENT_3D('',#271541,#271542,#271543); +#271541 = CARTESIAN_POINT('',(130.516853,-79.044443,0.)); +#271542 = DIRECTION('',(0.708134338384,-0.706077728583,0.)); +#271543 = DIRECTION('',(0.706077728583,0.708134338384,0.)); +#271544 = ADVANCED_FACE('',(#271545),#271570,.F.); +#271545 = FACE_BOUND('',#271546,.F.); +#271546 = EDGE_LOOP('',(#271547,#271548,#271556,#271564)); +#271547 = ORIENTED_EDGE('',*,*,#271526,.T.); +#271548 = ORIENTED_EDGE('',*,*,#271549,.T.); +#271549 = EDGE_CURVE('',#271519,#271550,#271552,.T.); +#271550 = VERTEX_POINT('',#271551); +#271551 = CARTESIAN_POINT('',(131.45,-74.241422,-3.5E-02)); +#271552 = LINE('',#271553,#271554); +#271553 = CARTESIAN_POINT('',(131.45,-78.108578,-3.5E-02)); +#271554 = VECTOR('',#271555,1.); +#271555 = DIRECTION('',(0.,1.,0.)); +#271556 = ORIENTED_EDGE('',*,*,#271557,.F.); +#271557 = EDGE_CURVE('',#271558,#271550,#271560,.T.); +#271558 = VERTEX_POINT('',#271559); +#271559 = CARTESIAN_POINT('',(131.45,-74.241422,0.)); +#271560 = LINE('',#271561,#271562); +#271561 = CARTESIAN_POINT('',(131.45,-74.241422,0.)); +#271562 = VECTOR('',#271563,1.); +#271563 = DIRECTION('',(0.,0.,-1.)); +#271564 = ORIENTED_EDGE('',*,*,#271565,.F.); +#271565 = EDGE_CURVE('',#271527,#271558,#271566,.T.); +#271566 = LINE('',#271567,#271568); +#271567 = CARTESIAN_POINT('',(131.45,-78.108578,0.)); +#271568 = VECTOR('',#271569,1.); +#271569 = DIRECTION('',(0.,1.,0.)); +#271570 = PLANE('',#271571); +#271571 = AXIS2_PLACEMENT_3D('',#271572,#271573,#271574); +#271572 = CARTESIAN_POINT('',(131.45,-78.108578,0.)); +#271573 = DIRECTION('',(1.,-0.,0.)); +#271574 = DIRECTION('',(0.,1.,0.)); +#271575 = ADVANCED_FACE('',(#271576),#271601,.F.); +#271576 = FACE_BOUND('',#271577,.F.); +#271577 = EDGE_LOOP('',(#271578,#271579,#271587,#271595)); +#271578 = ORIENTED_EDGE('',*,*,#271557,.T.); +#271579 = ORIENTED_EDGE('',*,*,#271580,.T.); +#271580 = EDGE_CURVE('',#271550,#271581,#271583,.T.); +#271581 = VERTEX_POINT('',#271582); +#271582 = CARTESIAN_POINT('',(131.378078,-74.1695,-3.5E-02)); +#271583 = LINE('',#271584,#271585); +#271584 = CARTESIAN_POINT('',(131.45,-74.241422,-3.5E-02)); +#271585 = VECTOR('',#271586,1.); +#271586 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#271587 = ORIENTED_EDGE('',*,*,#271588,.F.); +#271588 = EDGE_CURVE('',#271589,#271581,#271591,.T.); +#271589 = VERTEX_POINT('',#271590); +#271590 = CARTESIAN_POINT('',(131.378078,-74.1695,0.)); +#271591 = LINE('',#271592,#271593); +#271592 = CARTESIAN_POINT('',(131.378078,-74.1695,0.)); +#271593 = VECTOR('',#271594,1.); +#271594 = DIRECTION('',(0.,0.,-1.)); +#271595 = ORIENTED_EDGE('',*,*,#271596,.F.); +#271596 = EDGE_CURVE('',#271558,#271589,#271597,.T.); +#271597 = LINE('',#271598,#271599); +#271598 = CARTESIAN_POINT('',(131.45,-74.241422,0.)); +#271599 = VECTOR('',#271600,1.); +#271600 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#271601 = PLANE('',#271602); +#271602 = AXIS2_PLACEMENT_3D('',#271603,#271604,#271605); +#271603 = CARTESIAN_POINT('',(131.45,-74.241422,0.)); +#271604 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#271605 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#271606 = ADVANCED_FACE('',(#271607),#271632,.F.); +#271607 = FACE_BOUND('',#271608,.F.); +#271608 = EDGE_LOOP('',(#271609,#271610,#271618,#271626)); +#271609 = ORIENTED_EDGE('',*,*,#271588,.T.); +#271610 = ORIENTED_EDGE('',*,*,#271611,.T.); +#271611 = EDGE_CURVE('',#271581,#271612,#271614,.T.); +#271612 = VERTEX_POINT('',#271613); +#271613 = CARTESIAN_POINT('',(131.364805,-74.177164,-3.5E-02)); +#271614 = LINE('',#271615,#271616); +#271615 = CARTESIAN_POINT('',(131.378078,-74.1695,-3.5E-02)); +#271616 = VECTOR('',#271617,1.); +#271617 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#271618 = ORIENTED_EDGE('',*,*,#271619,.F.); +#271619 = EDGE_CURVE('',#271620,#271612,#271622,.T.); +#271620 = VERTEX_POINT('',#271621); +#271621 = CARTESIAN_POINT('',(131.364805,-74.177164,0.)); +#271622 = LINE('',#271623,#271624); +#271623 = CARTESIAN_POINT('',(131.364805,-74.177164,0.)); +#271624 = VECTOR('',#271625,1.); +#271625 = DIRECTION('',(0.,0.,-1.)); +#271626 = ORIENTED_EDGE('',*,*,#271627,.F.); +#271627 = EDGE_CURVE('',#271589,#271620,#271628,.T.); +#271628 = LINE('',#271629,#271630); +#271629 = CARTESIAN_POINT('',(131.378078,-74.1695,0.)); +#271630 = VECTOR('',#271631,1.); +#271631 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#271632 = PLANE('',#271633); +#271633 = AXIS2_PLACEMENT_3D('',#271634,#271635,#271636); +#271634 = CARTESIAN_POINT('',(131.378078,-74.1695,0.)); +#271635 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#271636 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#271637 = ADVANCED_FACE('',(#271638),#271665,.T.); +#271638 = FACE_BOUND('',#271639,.F.); +#271639 = EDGE_LOOP('',(#271640,#271641,#271650,#271658)); +#271640 = ORIENTED_EDGE('',*,*,#271619,.T.); +#271641 = ORIENTED_EDGE('',*,*,#271642,.T.); +#271642 = EDGE_CURVE('',#271612,#271643,#271645,.T.); +#271643 = VERTEX_POINT('',#271644); +#271644 = CARTESIAN_POINT('',(131.527164,-74.014805,-3.5E-02)); +#271645 = CIRCLE('',#271646,0.300000118202); +#271646 = AXIS2_PLACEMENT_3D('',#271647,#271648,#271649); +#271647 = CARTESIAN_POINT('',(131.25,-73.9,-3.5E-02)); +#271648 = DIRECTION('',(0.,0.,-1.)); +#271649 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#271650 = ORIENTED_EDGE('',*,*,#271651,.F.); +#271651 = EDGE_CURVE('',#271652,#271643,#271654,.T.); +#271652 = VERTEX_POINT('',#271653); +#271653 = CARTESIAN_POINT('',(131.527164,-74.014805,0.)); +#271654 = LINE('',#271655,#271656); +#271655 = CARTESIAN_POINT('',(131.527164,-74.014805,0.)); +#271656 = VECTOR('',#271657,1.); +#271657 = DIRECTION('',(0.,0.,-1.)); +#271658 = ORIENTED_EDGE('',*,*,#271659,.F.); +#271659 = EDGE_CURVE('',#271620,#271652,#271660,.T.); +#271660 = CIRCLE('',#271661,0.300000118202); +#271661 = AXIS2_PLACEMENT_3D('',#271662,#271663,#271664); +#271662 = CARTESIAN_POINT('',(131.25,-73.9,0.)); +#271663 = DIRECTION('',(0.,0.,-1.)); +#271664 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#271665 = CYLINDRICAL_SURFACE('',#271666,0.300000118202); +#271666 = AXIS2_PLACEMENT_3D('',#271667,#271668,#271669); +#271667 = CARTESIAN_POINT('',(131.25,-73.9,0.)); +#271668 = DIRECTION('',(-0.,-0.,1.)); +#271669 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#271670 = ADVANCED_FACE('',(#271671),#271687,.F.); +#271671 = FACE_BOUND('',#271672,.F.); +#271672 = EDGE_LOOP('',(#271673,#271674,#271680,#271681)); +#271673 = ORIENTED_EDGE('',*,*,#271651,.T.); +#271674 = ORIENTED_EDGE('',*,*,#271675,.T.); +#271675 = EDGE_CURVE('',#271643,#270703,#271676,.T.); +#271676 = LINE('',#271677,#271678); +#271677 = CARTESIAN_POINT('',(131.527164,-74.014805,-3.5E-02)); +#271678 = VECTOR('',#271679,1.); +#271679 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#271680 = ORIENTED_EDGE('',*,*,#270700,.F.); +#271681 = ORIENTED_EDGE('',*,*,#271682,.F.); +#271682 = EDGE_CURVE('',#271652,#270701,#271683,.T.); +#271683 = LINE('',#271684,#271685); +#271684 = CARTESIAN_POINT('',(131.527164,-74.014805,0.)); +#271685 = VECTOR('',#271686,1.); +#271686 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#271687 = PLANE('',#271688); +#271688 = AXIS2_PLACEMENT_3D('',#271689,#271690,#271691); +#271689 = CARTESIAN_POINT('',(131.527164,-74.014805,0.)); +#271690 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#271691 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#271692 = ADVANCED_FACE('',(#271693),#271720,.F.); +#271693 = FACE_BOUND('',#271694,.F.); +#271694 = EDGE_LOOP('',(#271695,#271705,#271712,#271713)); +#271695 = ORIENTED_EDGE('',*,*,#271696,.T.); +#271696 = EDGE_CURVE('',#271697,#271699,#271701,.T.); +#271697 = VERTEX_POINT('',#271698); +#271698 = CARTESIAN_POINT('',(128.71152,-102.574265,0.)); +#271699 = VERTEX_POINT('',#271700); +#271700 = CARTESIAN_POINT('',(128.71152,-102.574265,-3.5E-02)); +#271701 = LINE('',#271702,#271703); +#271702 = CARTESIAN_POINT('',(128.71152,-102.574265,0.)); +#271703 = VECTOR('',#271704,1.); +#271704 = DIRECTION('',(0.,0.,-1.)); +#271705 = ORIENTED_EDGE('',*,*,#271706,.T.); +#271706 = EDGE_CURVE('',#271699,#271699,#271707,.T.); +#271707 = CIRCLE('',#271708,0.137255); +#271708 = AXIS2_PLACEMENT_3D('',#271709,#271710,#271711); +#271709 = CARTESIAN_POINT('',(128.574265,-102.574265,-3.5E-02)); +#271710 = DIRECTION('',(0.,0.,1.)); +#271711 = DIRECTION('',(1.,0.,-0.)); +#271712 = ORIENTED_EDGE('',*,*,#271696,.F.); +#271713 = ORIENTED_EDGE('',*,*,#271714,.F.); +#271714 = EDGE_CURVE('',#271697,#271697,#271715,.T.); +#271715 = CIRCLE('',#271716,0.137255); +#271716 = AXIS2_PLACEMENT_3D('',#271717,#271718,#271719); +#271717 = CARTESIAN_POINT('',(128.574265,-102.574265,0.)); +#271718 = DIRECTION('',(0.,0.,1.)); +#271719 = DIRECTION('',(1.,0.,-0.)); +#271720 = CYLINDRICAL_SURFACE('',#271721,0.137255); +#271721 = AXIS2_PLACEMENT_3D('',#271722,#271723,#271724); +#271722 = CARTESIAN_POINT('',(128.574265,-102.574265,0.)); +#271723 = DIRECTION('',(0.,0.,1.)); +#271724 = DIRECTION('',(1.,0.,-0.)); +#271725 = ADVANCED_FACE('',(#271726),#271753,.F.); +#271726 = FACE_BOUND('',#271727,.F.); +#271727 = EDGE_LOOP('',(#271728,#271738,#271745,#271746)); +#271728 = ORIENTED_EDGE('',*,*,#271729,.T.); +#271729 = EDGE_CURVE('',#271730,#271732,#271734,.T.); +#271730 = VERTEX_POINT('',#271731); +#271731 = CARTESIAN_POINT('',(131.387255,-73.9,0.)); +#271732 = VERTEX_POINT('',#271733); +#271733 = CARTESIAN_POINT('',(131.387255,-73.9,-3.5E-02)); +#271734 = LINE('',#271735,#271736); +#271735 = CARTESIAN_POINT('',(131.387255,-73.9,0.)); +#271736 = VECTOR('',#271737,1.); +#271737 = DIRECTION('',(0.,0.,-1.)); +#271738 = ORIENTED_EDGE('',*,*,#271739,.T.); +#271739 = EDGE_CURVE('',#271732,#271732,#271740,.T.); +#271740 = CIRCLE('',#271741,0.137255); +#271741 = AXIS2_PLACEMENT_3D('',#271742,#271743,#271744); +#271742 = CARTESIAN_POINT('',(131.25,-73.9,-3.5E-02)); +#271743 = DIRECTION('',(0.,0.,1.)); +#271744 = DIRECTION('',(1.,0.,-0.)); +#271745 = ORIENTED_EDGE('',*,*,#271729,.F.); +#271746 = ORIENTED_EDGE('',*,*,#271747,.F.); +#271747 = EDGE_CURVE('',#271730,#271730,#271748,.T.); +#271748 = CIRCLE('',#271749,0.137255); +#271749 = AXIS2_PLACEMENT_3D('',#271750,#271751,#271752); +#271750 = CARTESIAN_POINT('',(131.25,-73.9,0.)); +#271751 = DIRECTION('',(0.,0.,1.)); +#271752 = DIRECTION('',(1.,0.,-0.)); +#271753 = CYLINDRICAL_SURFACE('',#271754,0.137255); +#271754 = AXIS2_PLACEMENT_3D('',#271755,#271756,#271757); +#271755 = CARTESIAN_POINT('',(131.25,-73.9,0.)); +#271756 = DIRECTION('',(0.,0.,1.)); +#271757 = DIRECTION('',(1.,0.,-0.)); +#271758 = ADVANCED_FACE('',(#271759,#271793,#271796),#271799,.F.); +#271759 = FACE_BOUND('',#271760,.F.); +#271760 = EDGE_LOOP('',(#271761,#271762,#271763,#271764,#271765,#271766, + #271767,#271768,#271769,#271770,#271771,#271772,#271773,#271774, + #271775,#271776,#271777,#271778,#271779,#271780,#271781,#271782, + #271783,#271784,#271785,#271786,#271787,#271788,#271789,#271790, + #271791,#271792)); +#271761 = ORIENTED_EDGE('',*,*,#270726,.T.); +#271762 = ORIENTED_EDGE('',*,*,#270757,.T.); +#271763 = ORIENTED_EDGE('',*,*,#270788,.T.); +#271764 = ORIENTED_EDGE('',*,*,#270819,.T.); +#271765 = ORIENTED_EDGE('',*,*,#270850,.T.); +#271766 = ORIENTED_EDGE('',*,*,#270881,.T.); +#271767 = ORIENTED_EDGE('',*,*,#270912,.T.); +#271768 = ORIENTED_EDGE('',*,*,#270943,.T.); +#271769 = ORIENTED_EDGE('',*,*,#270974,.T.); +#271770 = ORIENTED_EDGE('',*,*,#271005,.T.); +#271771 = ORIENTED_EDGE('',*,*,#271036,.T.); +#271772 = ORIENTED_EDGE('',*,*,#271067,.T.); +#271773 = ORIENTED_EDGE('',*,*,#271098,.T.); +#271774 = ORIENTED_EDGE('',*,*,#271129,.T.); +#271775 = ORIENTED_EDGE('',*,*,#271161,.T.); +#271776 = ORIENTED_EDGE('',*,*,#271193,.T.); +#271777 = ORIENTED_EDGE('',*,*,#271224,.T.); +#271778 = ORIENTED_EDGE('',*,*,#271255,.T.); +#271779 = ORIENTED_EDGE('',*,*,#271286,.T.); +#271780 = ORIENTED_EDGE('',*,*,#271317,.T.); +#271781 = ORIENTED_EDGE('',*,*,#271348,.T.); +#271782 = ORIENTED_EDGE('',*,*,#271379,.T.); +#271783 = ORIENTED_EDGE('',*,*,#271410,.T.); +#271784 = ORIENTED_EDGE('',*,*,#271441,.T.); +#271785 = ORIENTED_EDGE('',*,*,#271472,.T.); +#271786 = ORIENTED_EDGE('',*,*,#271503,.T.); +#271787 = ORIENTED_EDGE('',*,*,#271534,.T.); +#271788 = ORIENTED_EDGE('',*,*,#271565,.T.); +#271789 = ORIENTED_EDGE('',*,*,#271596,.T.); +#271790 = ORIENTED_EDGE('',*,*,#271627,.T.); +#271791 = ORIENTED_EDGE('',*,*,#271659,.T.); +#271792 = ORIENTED_EDGE('',*,*,#271682,.T.); +#271793 = FACE_BOUND('',#271794,.F.); +#271794 = EDGE_LOOP('',(#271795)); +#271795 = ORIENTED_EDGE('',*,*,#271714,.T.); +#271796 = FACE_BOUND('',#271797,.F.); +#271797 = EDGE_LOOP('',(#271798)); +#271798 = ORIENTED_EDGE('',*,*,#271747,.T.); +#271799 = PLANE('',#271800); +#271800 = AXIS2_PLACEMENT_3D('',#271801,#271802,#271803); +#271801 = CARTESIAN_POINT('',(0.,0.,0.)); +#271802 = DIRECTION('',(-0.,-0.,-1.)); +#271803 = DIRECTION('',(-1.,0.,0.)); +#271804 = ADVANCED_FACE('',(#271805,#271839,#271842),#271845,.T.); +#271805 = FACE_BOUND('',#271806,.T.); +#271806 = EDGE_LOOP('',(#271807,#271808,#271809,#271810,#271811,#271812, + #271813,#271814,#271815,#271816,#271817,#271818,#271819,#271820, + #271821,#271822,#271823,#271824,#271825,#271826,#271827,#271828, + #271829,#271830,#271831,#271832,#271833,#271834,#271835,#271836, + #271837,#271838)); +#271807 = ORIENTED_EDGE('',*,*,#270710,.T.); +#271808 = ORIENTED_EDGE('',*,*,#270741,.T.); +#271809 = ORIENTED_EDGE('',*,*,#270772,.T.); +#271810 = ORIENTED_EDGE('',*,*,#270803,.T.); +#271811 = ORIENTED_EDGE('',*,*,#270834,.T.); +#271812 = ORIENTED_EDGE('',*,*,#270865,.T.); +#271813 = ORIENTED_EDGE('',*,*,#270896,.T.); +#271814 = ORIENTED_EDGE('',*,*,#270927,.T.); +#271815 = ORIENTED_EDGE('',*,*,#270958,.T.); +#271816 = ORIENTED_EDGE('',*,*,#270989,.T.); +#271817 = ORIENTED_EDGE('',*,*,#271020,.T.); +#271818 = ORIENTED_EDGE('',*,*,#271051,.T.); +#271819 = ORIENTED_EDGE('',*,*,#271082,.T.); +#271820 = ORIENTED_EDGE('',*,*,#271113,.T.); +#271821 = ORIENTED_EDGE('',*,*,#271144,.T.); +#271822 = ORIENTED_EDGE('',*,*,#271177,.T.); +#271823 = ORIENTED_EDGE('',*,*,#271208,.T.); +#271824 = ORIENTED_EDGE('',*,*,#271239,.T.); +#271825 = ORIENTED_EDGE('',*,*,#271270,.T.); +#271826 = ORIENTED_EDGE('',*,*,#271301,.T.); +#271827 = ORIENTED_EDGE('',*,*,#271332,.T.); +#271828 = ORIENTED_EDGE('',*,*,#271363,.T.); +#271829 = ORIENTED_EDGE('',*,*,#271394,.T.); +#271830 = ORIENTED_EDGE('',*,*,#271425,.T.); +#271831 = ORIENTED_EDGE('',*,*,#271456,.T.); +#271832 = ORIENTED_EDGE('',*,*,#271487,.T.); +#271833 = ORIENTED_EDGE('',*,*,#271518,.T.); +#271834 = ORIENTED_EDGE('',*,*,#271549,.T.); +#271835 = ORIENTED_EDGE('',*,*,#271580,.T.); +#271836 = ORIENTED_EDGE('',*,*,#271611,.T.); +#271837 = ORIENTED_EDGE('',*,*,#271642,.T.); +#271838 = ORIENTED_EDGE('',*,*,#271675,.T.); +#271839 = FACE_BOUND('',#271840,.T.); +#271840 = EDGE_LOOP('',(#271841)); +#271841 = ORIENTED_EDGE('',*,*,#271706,.T.); +#271842 = FACE_BOUND('',#271843,.T.); +#271843 = EDGE_LOOP('',(#271844)); +#271844 = ORIENTED_EDGE('',*,*,#271739,.T.); +#271845 = PLANE('',#271846); +#271846 = AXIS2_PLACEMENT_3D('',#271847,#271848,#271849); +#271847 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#271848 = DIRECTION('',(-0.,-0.,-1.)); +#271849 = DIRECTION('',(-1.,0.,0.)); +#271850 = MANIFOLD_SOLID_BREP('',#271851); +#271851 = CLOSED_SHELL('',(#271852,#271892,#271923,#271954,#271985, + #272016,#272047,#272078,#272109,#272140,#272171,#272202,#272233, + #272264,#272297,#272328,#272359,#272390,#272421,#272452,#272483, + #272514,#272547,#272578,#272609,#272642,#272664,#272697,#272734)); +#271852 = ADVANCED_FACE('',(#271853),#271887,.T.); +#271853 = FACE_BOUND('',#271854,.T.); +#271854 = EDGE_LOOP('',(#271855,#271865,#271873,#271881)); +#271855 = ORIENTED_EDGE('',*,*,#271856,.T.); +#271856 = EDGE_CURVE('',#271857,#271859,#271861,.T.); +#271857 = VERTEX_POINT('',#271858); +#271858 = CARTESIAN_POINT('',(151.371921,-153.2695,1.51)); +#271859 = VERTEX_POINT('',#271860); +#271860 = CARTESIAN_POINT('',(151.371921,-153.2695,1.545)); +#271861 = LINE('',#271862,#271863); +#271862 = CARTESIAN_POINT('',(151.371921,-153.2695,1.51)); +#271863 = VECTOR('',#271864,1.); +#271864 = DIRECTION('',(0.,0.,1.)); +#271865 = ORIENTED_EDGE('',*,*,#271866,.T.); +#271866 = EDGE_CURVE('',#271859,#271867,#271869,.T.); +#271867 = VERTEX_POINT('',#271868); +#271868 = CARTESIAN_POINT('',(151.325557,-153.313147,1.545)); +#271869 = LINE('',#271870,#271871); +#271870 = CARTESIAN_POINT('',(151.371921,-153.2695,1.545)); +#271871 = VECTOR('',#271872,1.); +#271872 = DIRECTION('',(-0.728119304435,-0.685450420168,0.)); +#271873 = ORIENTED_EDGE('',*,*,#271874,.F.); +#271874 = EDGE_CURVE('',#271875,#271867,#271877,.T.); +#271875 = VERTEX_POINT('',#271876); +#271876 = CARTESIAN_POINT('',(151.325557,-153.313147,1.51)); +#271877 = LINE('',#271878,#271879); +#271878 = CARTESIAN_POINT('',(151.325557,-153.313147,1.51)); +#271879 = VECTOR('',#271880,1.); +#271880 = DIRECTION('',(0.,0.,1.)); +#271881 = ORIENTED_EDGE('',*,*,#271882,.F.); +#271882 = EDGE_CURVE('',#271857,#271875,#271883,.T.); +#271883 = LINE('',#271884,#271885); +#271884 = CARTESIAN_POINT('',(151.371921,-153.2695,1.51)); +#271885 = VECTOR('',#271886,1.); +#271886 = DIRECTION('',(-0.728119304435,-0.685450420168,0.)); +#271887 = PLANE('',#271888); +#271888 = AXIS2_PLACEMENT_3D('',#271889,#271890,#271891); +#271889 = CARTESIAN_POINT('',(151.371921,-153.2695,1.51)); +#271890 = DIRECTION('',(0.685450420168,-0.728119304435,0.)); +#271891 = DIRECTION('',(-0.728119304435,-0.685450420168,0.)); +#271892 = ADVANCED_FACE('',(#271893),#271918,.T.); +#271893 = FACE_BOUND('',#271894,.T.); +#271894 = EDGE_LOOP('',(#271895,#271896,#271904,#271912)); +#271895 = ORIENTED_EDGE('',*,*,#271874,.T.); +#271896 = ORIENTED_EDGE('',*,*,#271897,.T.); +#271897 = EDGE_CURVE('',#271867,#271898,#271900,.T.); +#271898 = VERTEX_POINT('',#271899); +#271899 = CARTESIAN_POINT('',(151.289509,-153.328079,1.545)); +#271900 = LINE('',#271901,#271902); +#271901 = CARTESIAN_POINT('',(151.325557,-153.313147,1.545)); +#271902 = VECTOR('',#271903,1.); +#271903 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#271904 = ORIENTED_EDGE('',*,*,#271905,.F.); +#271905 = EDGE_CURVE('',#271906,#271898,#271908,.T.); +#271906 = VERTEX_POINT('',#271907); +#271907 = CARTESIAN_POINT('',(151.289509,-153.328079,1.51)); +#271908 = LINE('',#271909,#271910); +#271909 = CARTESIAN_POINT('',(151.289509,-153.328079,1.51)); +#271910 = VECTOR('',#271911,1.); +#271911 = DIRECTION('',(0.,0.,1.)); +#271912 = ORIENTED_EDGE('',*,*,#271913,.F.); +#271913 = EDGE_CURVE('',#271875,#271906,#271914,.T.); +#271914 = LINE('',#271915,#271916); +#271915 = CARTESIAN_POINT('',(151.325557,-153.313147,1.51)); +#271916 = VECTOR('',#271917,1.); +#271917 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#271918 = PLANE('',#271919); +#271919 = AXIS2_PLACEMENT_3D('',#271920,#271921,#271922); +#271920 = CARTESIAN_POINT('',(151.325557,-153.313147,1.51)); +#271921 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#271922 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#271923 = ADVANCED_FACE('',(#271924),#271949,.T.); +#271924 = FACE_BOUND('',#271925,.T.); +#271925 = EDGE_LOOP('',(#271926,#271927,#271935,#271943)); +#271926 = ORIENTED_EDGE('',*,*,#271905,.T.); +#271927 = ORIENTED_EDGE('',*,*,#271928,.T.); +#271928 = EDGE_CURVE('',#271898,#271929,#271931,.T.); +#271929 = VERTEX_POINT('',#271930); +#271930 = CARTESIAN_POINT('',(150.6,-153.33,1.545)); +#271931 = LINE('',#271932,#271933); +#271932 = CARTESIAN_POINT('',(151.289509,-153.328079,1.545)); +#271933 = VECTOR('',#271934,1.); +#271934 = DIRECTION('',(-0.999996119012,-2.786029688708E-03,0.)); +#271935 = ORIENTED_EDGE('',*,*,#271936,.F.); +#271936 = EDGE_CURVE('',#271937,#271929,#271939,.T.); +#271937 = VERTEX_POINT('',#271938); +#271938 = CARTESIAN_POINT('',(150.6,-153.33,1.51)); +#271939 = LINE('',#271940,#271941); +#271940 = CARTESIAN_POINT('',(150.6,-153.33,1.51)); +#271941 = VECTOR('',#271942,1.); +#271942 = DIRECTION('',(0.,0.,1.)); +#271943 = ORIENTED_EDGE('',*,*,#271944,.F.); +#271944 = EDGE_CURVE('',#271906,#271937,#271945,.T.); +#271945 = LINE('',#271946,#271947); +#271946 = CARTESIAN_POINT('',(151.289509,-153.328079,1.51)); +#271947 = VECTOR('',#271948,1.); +#271948 = DIRECTION('',(-0.999996119012,-2.786029688708E-03,0.)); +#271949 = PLANE('',#271950); +#271950 = AXIS2_PLACEMENT_3D('',#271951,#271952,#271953); +#271951 = CARTESIAN_POINT('',(151.289509,-153.328079,1.51)); +#271952 = DIRECTION('',(2.786029688708E-03,-0.999996119012,0.)); +#271953 = DIRECTION('',(-0.999996119012,-2.786029688708E-03,0.)); +#271954 = ADVANCED_FACE('',(#271955),#271980,.T.); +#271955 = FACE_BOUND('',#271956,.T.); +#271956 = EDGE_LOOP('',(#271957,#271958,#271966,#271974)); +#271957 = ORIENTED_EDGE('',*,*,#271936,.T.); +#271958 = ORIENTED_EDGE('',*,*,#271959,.T.); +#271959 = EDGE_CURVE('',#271929,#271960,#271962,.T.); +#271960 = VERTEX_POINT('',#271961); +#271961 = CARTESIAN_POINT('',(150.598079,-153.519509,1.545)); +#271962 = LINE('',#271963,#271964); +#271963 = CARTESIAN_POINT('',(150.6,-153.33,1.545)); +#271964 = VECTOR('',#271965,1.); +#271965 = DIRECTION('',(-1.013620098891E-02,-0.999948627395,0.)); +#271966 = ORIENTED_EDGE('',*,*,#271967,.F.); +#271967 = EDGE_CURVE('',#271968,#271960,#271970,.T.); +#271968 = VERTEX_POINT('',#271969); +#271969 = CARTESIAN_POINT('',(150.598079,-153.519509,1.51)); +#271970 = LINE('',#271971,#271972); +#271971 = CARTESIAN_POINT('',(150.598079,-153.519509,1.51)); +#271972 = VECTOR('',#271973,1.); +#271973 = DIRECTION('',(0.,0.,1.)); +#271974 = ORIENTED_EDGE('',*,*,#271975,.F.); +#271975 = EDGE_CURVE('',#271937,#271968,#271976,.T.); +#271976 = LINE('',#271977,#271978); +#271977 = CARTESIAN_POINT('',(150.6,-153.33,1.51)); +#271978 = VECTOR('',#271979,1.); +#271979 = DIRECTION('',(-1.013620098891E-02,-0.999948627395,0.)); +#271980 = PLANE('',#271981); +#271981 = AXIS2_PLACEMENT_3D('',#271982,#271983,#271984); +#271982 = CARTESIAN_POINT('',(150.6,-153.33,1.51)); +#271983 = DIRECTION('',(0.999948627395,-1.013620098891E-02,0.)); +#271984 = DIRECTION('',(-1.013620098891E-02,-0.999948627395,0.)); +#271985 = ADVANCED_FACE('',(#271986),#272011,.T.); +#271986 = FACE_BOUND('',#271987,.T.); +#271987 = EDGE_LOOP('',(#271988,#271989,#271997,#272005)); +#271988 = ORIENTED_EDGE('',*,*,#271967,.T.); +#271989 = ORIENTED_EDGE('',*,*,#271990,.T.); +#271990 = EDGE_CURVE('',#271960,#271991,#271993,.T.); +#271991 = VERTEX_POINT('',#271992); +#271992 = CARTESIAN_POINT('',(150.583147,-153.555558,1.545)); +#271993 = LINE('',#271994,#271995); +#271994 = CARTESIAN_POINT('',(150.598079,-153.519509,1.545)); +#271995 = VECTOR('',#271996,1.); +#271996 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#271997 = ORIENTED_EDGE('',*,*,#271998,.F.); +#271998 = EDGE_CURVE('',#271999,#271991,#272001,.T.); +#271999 = VERTEX_POINT('',#272000); +#272000 = CARTESIAN_POINT('',(150.583147,-153.555558,1.51)); +#272001 = LINE('',#272002,#272003); +#272002 = CARTESIAN_POINT('',(150.583147,-153.555558,1.51)); +#272003 = VECTOR('',#272004,1.); +#272004 = DIRECTION('',(0.,0.,1.)); +#272005 = ORIENTED_EDGE('',*,*,#272006,.F.); +#272006 = EDGE_CURVE('',#271968,#271999,#272007,.T.); +#272007 = LINE('',#272008,#272009); +#272008 = CARTESIAN_POINT('',(150.598079,-153.519509,1.51)); +#272009 = VECTOR('',#272010,1.); +#272010 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#272011 = PLANE('',#272012); +#272012 = AXIS2_PLACEMENT_3D('',#272013,#272014,#272015); +#272013 = CARTESIAN_POINT('',(150.598079,-153.519509,1.51)); +#272014 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#272015 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#272016 = ADVANCED_FACE('',(#272017),#272042,.T.); +#272017 = FACE_BOUND('',#272018,.T.); +#272018 = EDGE_LOOP('',(#272019,#272020,#272028,#272036)); +#272019 = ORIENTED_EDGE('',*,*,#271998,.T.); +#272020 = ORIENTED_EDGE('',*,*,#272021,.T.); +#272021 = EDGE_CURVE('',#271991,#272022,#272024,.T.); +#272022 = VERTEX_POINT('',#272023); +#272023 = CARTESIAN_POINT('',(148.65,-155.491421,1.545)); +#272024 = LINE('',#272025,#272026); +#272025 = CARTESIAN_POINT('',(150.583147,-153.555558,1.545)); +#272026 = VECTOR('',#272027,1.); +#272027 = DIRECTION('',(-0.70661022635,-0.70760298757,0.)); +#272028 = ORIENTED_EDGE('',*,*,#272029,.F.); +#272029 = EDGE_CURVE('',#272030,#272022,#272032,.T.); +#272030 = VERTEX_POINT('',#272031); +#272031 = CARTESIAN_POINT('',(148.65,-155.491421,1.51)); +#272032 = LINE('',#272033,#272034); +#272033 = CARTESIAN_POINT('',(148.65,-155.491421,1.51)); +#272034 = VECTOR('',#272035,1.); +#272035 = DIRECTION('',(0.,0.,1.)); +#272036 = ORIENTED_EDGE('',*,*,#272037,.F.); +#272037 = EDGE_CURVE('',#271999,#272030,#272038,.T.); +#272038 = LINE('',#272039,#272040); +#272039 = CARTESIAN_POINT('',(150.583147,-153.555558,1.51)); +#272040 = VECTOR('',#272041,1.); +#272041 = DIRECTION('',(-0.70661022635,-0.70760298757,0.)); +#272042 = PLANE('',#272043); +#272043 = AXIS2_PLACEMENT_3D('',#272044,#272045,#272046); +#272044 = CARTESIAN_POINT('',(150.583147,-153.555558,1.51)); +#272045 = DIRECTION('',(0.70760298757,-0.70661022635,0.)); +#272046 = DIRECTION('',(-0.70661022635,-0.70760298757,0.)); +#272047 = ADVANCED_FACE('',(#272048),#272073,.T.); +#272048 = FACE_BOUND('',#272049,.T.); +#272049 = EDGE_LOOP('',(#272050,#272051,#272059,#272067)); +#272050 = ORIENTED_EDGE('',*,*,#272029,.T.); +#272051 = ORIENTED_EDGE('',*,*,#272052,.T.); +#272052 = EDGE_CURVE('',#272022,#272053,#272055,.T.); +#272053 = VERTEX_POINT('',#272054); +#272054 = CARTESIAN_POINT('',(148.648079,-156.310061,1.545)); +#272055 = LINE('',#272056,#272057); +#272056 = CARTESIAN_POINT('',(148.65,-155.491421,1.545)); +#272057 = VECTOR('',#272058,1.); +#272058 = DIRECTION('',(-2.346568346431E-03,-0.999997246805,0.)); +#272059 = ORIENTED_EDGE('',*,*,#272060,.F.); +#272060 = EDGE_CURVE('',#272061,#272053,#272063,.T.); +#272061 = VERTEX_POINT('',#272062); +#272062 = CARTESIAN_POINT('',(148.648079,-156.310061,1.51)); +#272063 = LINE('',#272064,#272065); +#272064 = CARTESIAN_POINT('',(148.648079,-156.310061,1.51)); +#272065 = VECTOR('',#272066,1.); +#272066 = DIRECTION('',(0.,0.,1.)); +#272067 = ORIENTED_EDGE('',*,*,#272068,.F.); +#272068 = EDGE_CURVE('',#272030,#272061,#272069,.T.); +#272069 = LINE('',#272070,#272071); +#272070 = CARTESIAN_POINT('',(148.65,-155.491421,1.51)); +#272071 = VECTOR('',#272072,1.); +#272072 = DIRECTION('',(-2.346568346431E-03,-0.999997246805,0.)); +#272073 = PLANE('',#272074); +#272074 = AXIS2_PLACEMENT_3D('',#272075,#272076,#272077); +#272075 = CARTESIAN_POINT('',(148.65,-155.491421,1.51)); +#272076 = DIRECTION('',(0.999997246805,-2.346568346431E-03,0.)); +#272077 = DIRECTION('',(-2.346568346431E-03,-0.999997246805,0.)); +#272078 = ADVANCED_FACE('',(#272079),#272104,.T.); +#272079 = FACE_BOUND('',#272080,.T.); +#272080 = EDGE_LOOP('',(#272081,#272082,#272090,#272098)); +#272081 = ORIENTED_EDGE('',*,*,#272060,.T.); +#272082 = ORIENTED_EDGE('',*,*,#272083,.T.); +#272083 = EDGE_CURVE('',#272053,#272084,#272086,.T.); +#272084 = VERTEX_POINT('',#272085); +#272085 = CARTESIAN_POINT('',(148.633147,-156.346109,1.545)); +#272086 = LINE('',#272087,#272088); +#272087 = CARTESIAN_POINT('',(148.648079,-156.310061,1.545)); +#272088 = VECTOR('',#272089,1.); +#272089 = DIRECTION('',(-0.382692828059,-0.923875640631,0.)); +#272090 = ORIENTED_EDGE('',*,*,#272091,.F.); +#272091 = EDGE_CURVE('',#272092,#272084,#272094,.T.); +#272092 = VERTEX_POINT('',#272093); +#272093 = CARTESIAN_POINT('',(148.633147,-156.346109,1.51)); +#272094 = LINE('',#272095,#272096); +#272095 = CARTESIAN_POINT('',(148.633147,-156.346109,1.51)); +#272096 = VECTOR('',#272097,1.); +#272097 = DIRECTION('',(0.,0.,1.)); +#272098 = ORIENTED_EDGE('',*,*,#272099,.F.); +#272099 = EDGE_CURVE('',#272061,#272092,#272100,.T.); +#272100 = LINE('',#272101,#272102); +#272101 = CARTESIAN_POINT('',(148.648079,-156.310061,1.51)); +#272102 = VECTOR('',#272103,1.); +#272103 = DIRECTION('',(-0.382692828059,-0.923875640631,0.)); +#272104 = PLANE('',#272105); +#272105 = AXIS2_PLACEMENT_3D('',#272106,#272107,#272108); +#272106 = CARTESIAN_POINT('',(148.648079,-156.310061,1.51)); +#272107 = DIRECTION('',(0.923875640631,-0.382692828059,0.)); +#272108 = DIRECTION('',(-0.382692828059,-0.923875640631,0.)); +#272109 = ADVANCED_FACE('',(#272110),#272135,.T.); +#272110 = FACE_BOUND('',#272111,.T.); +#272111 = EDGE_LOOP('',(#272112,#272113,#272121,#272129)); +#272112 = ORIENTED_EDGE('',*,*,#272091,.T.); +#272113 = ORIENTED_EDGE('',*,*,#272114,.T.); +#272114 = EDGE_CURVE('',#272084,#272115,#272117,.T.); +#272115 = VERTEX_POINT('',#272116); +#272116 = CARTESIAN_POINT('',(148.346109,-156.633147,1.545)); +#272117 = LINE('',#272118,#272119); +#272118 = CARTESIAN_POINT('',(148.633147,-156.346109,1.545)); +#272119 = VECTOR('',#272120,1.); +#272120 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#272121 = ORIENTED_EDGE('',*,*,#272122,.F.); +#272122 = EDGE_CURVE('',#272123,#272115,#272125,.T.); +#272123 = VERTEX_POINT('',#272124); +#272124 = CARTESIAN_POINT('',(148.346109,-156.633147,1.51)); +#272125 = LINE('',#272126,#272127); +#272126 = CARTESIAN_POINT('',(148.346109,-156.633147,1.51)); +#272127 = VECTOR('',#272128,1.); +#272128 = DIRECTION('',(0.,0.,1.)); +#272129 = ORIENTED_EDGE('',*,*,#272130,.F.); +#272130 = EDGE_CURVE('',#272092,#272123,#272131,.T.); +#272131 = LINE('',#272132,#272133); +#272132 = CARTESIAN_POINT('',(148.633147,-156.346109,1.51)); +#272133 = VECTOR('',#272134,1.); +#272134 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#272135 = PLANE('',#272136); +#272136 = AXIS2_PLACEMENT_3D('',#272137,#272138,#272139); +#272137 = CARTESIAN_POINT('',(148.633147,-156.346109,1.51)); +#272138 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#272139 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#272140 = ADVANCED_FACE('',(#272141),#272166,.T.); +#272141 = FACE_BOUND('',#272142,.T.); +#272142 = EDGE_LOOP('',(#272143,#272144,#272152,#272160)); +#272143 = ORIENTED_EDGE('',*,*,#272122,.T.); +#272144 = ORIENTED_EDGE('',*,*,#272145,.T.); +#272145 = EDGE_CURVE('',#272115,#272146,#272148,.T.); +#272146 = VERTEX_POINT('',#272147); +#272147 = CARTESIAN_POINT('',(148.310061,-156.648079,1.545)); +#272148 = LINE('',#272149,#272150); +#272149 = CARTESIAN_POINT('',(148.346109,-156.633147,1.545)); +#272150 = VECTOR('',#272151,1.); +#272151 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#272152 = ORIENTED_EDGE('',*,*,#272153,.F.); +#272153 = EDGE_CURVE('',#272154,#272146,#272156,.T.); +#272154 = VERTEX_POINT('',#272155); +#272155 = CARTESIAN_POINT('',(148.310061,-156.648079,1.51)); +#272156 = LINE('',#272157,#272158); +#272157 = CARTESIAN_POINT('',(148.310061,-156.648079,1.51)); +#272158 = VECTOR('',#272159,1.); +#272159 = DIRECTION('',(0.,0.,1.)); +#272160 = ORIENTED_EDGE('',*,*,#272161,.F.); +#272161 = EDGE_CURVE('',#272123,#272154,#272162,.T.); +#272162 = LINE('',#272163,#272164); +#272163 = CARTESIAN_POINT('',(148.346109,-156.633147,1.51)); +#272164 = VECTOR('',#272165,1.); +#272165 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#272166 = PLANE('',#272167); +#272167 = AXIS2_PLACEMENT_3D('',#272168,#272169,#272170); +#272168 = CARTESIAN_POINT('',(148.346109,-156.633147,1.51)); +#272169 = DIRECTION('',(0.382692828059,-0.923875640631,0.)); +#272170 = DIRECTION('',(-0.923875640631,-0.382692828059,0.)); +#272171 = ADVANCED_FACE('',(#272172),#272197,.T.); +#272172 = FACE_BOUND('',#272173,.T.); +#272173 = EDGE_LOOP('',(#272174,#272175,#272183,#272191)); +#272174 = ORIENTED_EDGE('',*,*,#272153,.T.); +#272175 = ORIENTED_EDGE('',*,*,#272176,.T.); +#272176 = EDGE_CURVE('',#272146,#272177,#272179,.T.); +#272177 = VERTEX_POINT('',#272178); +#272178 = CARTESIAN_POINT('',(144.980491,-156.648079,1.545)); +#272179 = LINE('',#272180,#272181); +#272180 = CARTESIAN_POINT('',(148.310061,-156.648079,1.545)); +#272181 = VECTOR('',#272182,1.); +#272182 = DIRECTION('',(-1.,0.,0.)); +#272183 = ORIENTED_EDGE('',*,*,#272184,.F.); +#272184 = EDGE_CURVE('',#272185,#272177,#272187,.T.); +#272185 = VERTEX_POINT('',#272186); +#272186 = CARTESIAN_POINT('',(144.980491,-156.648079,1.51)); +#272187 = LINE('',#272188,#272189); +#272188 = CARTESIAN_POINT('',(144.980491,-156.648079,1.51)); +#272189 = VECTOR('',#272190,1.); +#272190 = DIRECTION('',(0.,0.,1.)); +#272191 = ORIENTED_EDGE('',*,*,#272192,.F.); +#272192 = EDGE_CURVE('',#272154,#272185,#272193,.T.); +#272193 = LINE('',#272194,#272195); +#272194 = CARTESIAN_POINT('',(148.310061,-156.648079,1.51)); +#272195 = VECTOR('',#272196,1.); +#272196 = DIRECTION('',(-1.,0.,0.)); +#272197 = PLANE('',#272198); +#272198 = AXIS2_PLACEMENT_3D('',#272199,#272200,#272201); +#272199 = CARTESIAN_POINT('',(148.310061,-156.648079,1.51)); +#272200 = DIRECTION('',(0.,-1.,0.)); +#272201 = DIRECTION('',(-1.,0.,0.)); +#272202 = ADVANCED_FACE('',(#272203),#272228,.T.); +#272203 = FACE_BOUND('',#272204,.T.); +#272204 = EDGE_LOOP('',(#272205,#272206,#272214,#272222)); +#272205 = ORIENTED_EDGE('',*,*,#272184,.T.); +#272206 = ORIENTED_EDGE('',*,*,#272207,.T.); +#272207 = EDGE_CURVE('',#272177,#272208,#272210,.T.); +#272208 = VERTEX_POINT('',#272209); +#272209 = CARTESIAN_POINT('',(144.944443,-156.633147,1.545)); +#272210 = LINE('',#272211,#272212); +#272211 = CARTESIAN_POINT('',(144.980491,-156.648079,1.545)); +#272212 = VECTOR('',#272213,1.); +#272213 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272214 = ORIENTED_EDGE('',*,*,#272215,.F.); +#272215 = EDGE_CURVE('',#272216,#272208,#272218,.T.); +#272216 = VERTEX_POINT('',#272217); +#272217 = CARTESIAN_POINT('',(144.944443,-156.633147,1.51)); +#272218 = LINE('',#272219,#272220); +#272219 = CARTESIAN_POINT('',(144.944443,-156.633147,1.51)); +#272220 = VECTOR('',#272221,1.); +#272221 = DIRECTION('',(0.,0.,1.)); +#272222 = ORIENTED_EDGE('',*,*,#272223,.F.); +#272223 = EDGE_CURVE('',#272185,#272216,#272224,.T.); +#272224 = LINE('',#272225,#272226); +#272225 = CARTESIAN_POINT('',(144.980491,-156.648079,1.51)); +#272226 = VECTOR('',#272227,1.); +#272227 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272228 = PLANE('',#272229); +#272229 = AXIS2_PLACEMENT_3D('',#272230,#272231,#272232); +#272230 = CARTESIAN_POINT('',(144.980491,-156.648079,1.51)); +#272231 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#272232 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272233 = ADVANCED_FACE('',(#272234),#272259,.T.); +#272234 = FACE_BOUND('',#272235,.T.); +#272235 = EDGE_LOOP('',(#272236,#272237,#272245,#272253)); +#272236 = ORIENTED_EDGE('',*,*,#272215,.T.); +#272237 = ORIENTED_EDGE('',*,*,#272238,.T.); +#272238 = EDGE_CURVE('',#272208,#272239,#272241,.T.); +#272239 = VERTEX_POINT('',#272240); +#272240 = CARTESIAN_POINT('',(144.116853,-155.805557,1.545)); +#272241 = LINE('',#272242,#272243); +#272242 = CARTESIAN_POINT('',(144.944443,-156.633147,1.545)); +#272243 = VECTOR('',#272244,1.); +#272244 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#272245 = ORIENTED_EDGE('',*,*,#272246,.F.); +#272246 = EDGE_CURVE('',#272247,#272239,#272249,.T.); +#272247 = VERTEX_POINT('',#272248); +#272248 = CARTESIAN_POINT('',(144.116853,-155.805557,1.51)); +#272249 = LINE('',#272250,#272251); +#272250 = CARTESIAN_POINT('',(144.116853,-155.805557,1.51)); +#272251 = VECTOR('',#272252,1.); +#272252 = DIRECTION('',(0.,0.,1.)); +#272253 = ORIENTED_EDGE('',*,*,#272254,.F.); +#272254 = EDGE_CURVE('',#272216,#272247,#272255,.T.); +#272255 = LINE('',#272256,#272257); +#272256 = CARTESIAN_POINT('',(144.944443,-156.633147,1.51)); +#272257 = VECTOR('',#272258,1.); +#272258 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#272259 = PLANE('',#272260); +#272260 = AXIS2_PLACEMENT_3D('',#272261,#272262,#272263); +#272261 = CARTESIAN_POINT('',(144.944443,-156.633147,1.51)); +#272262 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#272263 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#272264 = ADVANCED_FACE('',(#272265),#272292,.T.); +#272265 = FACE_BOUND('',#272266,.T.); +#272266 = EDGE_LOOP('',(#272267,#272268,#272277,#272285)); +#272267 = ORIENTED_EDGE('',*,*,#272246,.T.); +#272268 = ORIENTED_EDGE('',*,*,#272269,.T.); +#272269 = EDGE_CURVE('',#272239,#272270,#272272,.T.); +#272270 = VERTEX_POINT('',#272271); +#272271 = CARTESIAN_POINT('',(144.255557,-155.666853,1.545)); +#272272 = CIRCLE('',#272273,0.10000001929); +#272273 = AXIS2_PLACEMENT_3D('',#272274,#272275,#272276); +#272274 = CARTESIAN_POINT('',(144.2,-155.75,1.545)); +#272275 = DIRECTION('',(0.,0.,-1.)); +#272276 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#272277 = ORIENTED_EDGE('',*,*,#272278,.F.); +#272278 = EDGE_CURVE('',#272279,#272270,#272281,.T.); +#272279 = VERTEX_POINT('',#272280); +#272280 = CARTESIAN_POINT('',(144.255557,-155.666853,1.51)); +#272281 = LINE('',#272282,#272283); +#272282 = CARTESIAN_POINT('',(144.255557,-155.666853,1.51)); +#272283 = VECTOR('',#272284,1.); +#272284 = DIRECTION('',(0.,0.,1.)); +#272285 = ORIENTED_EDGE('',*,*,#272286,.F.); +#272286 = EDGE_CURVE('',#272247,#272279,#272287,.T.); +#272287 = CIRCLE('',#272288,0.10000001929); +#272288 = AXIS2_PLACEMENT_3D('',#272289,#272290,#272291); +#272289 = CARTESIAN_POINT('',(144.2,-155.75,1.51)); +#272290 = DIRECTION('',(0.,0.,-1.)); +#272291 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#272292 = CYLINDRICAL_SURFACE('',#272293,0.10000001929); +#272293 = AXIS2_PLACEMENT_3D('',#272294,#272295,#272296); +#272294 = CARTESIAN_POINT('',(144.2,-155.75,1.51)); +#272295 = DIRECTION('',(0.,0.,-1.)); +#272296 = DIRECTION('',(-0.83146983961,-0.555569892831,-0.)); +#272297 = ADVANCED_FACE('',(#272298),#272323,.T.); +#272298 = FACE_BOUND('',#272299,.T.); +#272299 = EDGE_LOOP('',(#272300,#272301,#272309,#272317)); +#272300 = ORIENTED_EDGE('',*,*,#272278,.T.); +#272301 = ORIENTED_EDGE('',*,*,#272302,.T.); +#272302 = EDGE_CURVE('',#272270,#272303,#272305,.T.); +#272303 = VERTEX_POINT('',#272304); +#272304 = CARTESIAN_POINT('',(145.041422,-156.45,1.545)); +#272305 = LINE('',#272306,#272307); +#272306 = CARTESIAN_POINT('',(144.255557,-155.666853,1.545)); +#272307 = VECTOR('',#272308,1.); +#272308 = DIRECTION('',(0.708330639693,-0.705880800753,0.)); +#272309 = ORIENTED_EDGE('',*,*,#272310,.F.); +#272310 = EDGE_CURVE('',#272311,#272303,#272313,.T.); +#272311 = VERTEX_POINT('',#272312); +#272312 = CARTESIAN_POINT('',(145.041422,-156.45,1.51)); +#272313 = LINE('',#272314,#272315); +#272314 = CARTESIAN_POINT('',(145.041422,-156.45,1.51)); +#272315 = VECTOR('',#272316,1.); +#272316 = DIRECTION('',(0.,0.,1.)); +#272317 = ORIENTED_EDGE('',*,*,#272318,.F.); +#272318 = EDGE_CURVE('',#272279,#272311,#272319,.T.); +#272319 = LINE('',#272320,#272321); +#272320 = CARTESIAN_POINT('',(144.255557,-155.666853,1.51)); +#272321 = VECTOR('',#272322,1.); +#272322 = DIRECTION('',(0.708330639693,-0.705880800753,0.)); +#272323 = PLANE('',#272324); +#272324 = AXIS2_PLACEMENT_3D('',#272325,#272326,#272327); +#272325 = CARTESIAN_POINT('',(144.255557,-155.666853,1.51)); +#272326 = DIRECTION('',(0.705880800753,0.708330639693,-0.)); +#272327 = DIRECTION('',(0.708330639693,-0.705880800753,0.)); +#272328 = ADVANCED_FACE('',(#272329),#272354,.T.); +#272329 = FACE_BOUND('',#272330,.T.); +#272330 = EDGE_LOOP('',(#272331,#272332,#272340,#272348)); +#272331 = ORIENTED_EDGE('',*,*,#272310,.T.); +#272332 = ORIENTED_EDGE('',*,*,#272333,.T.); +#272333 = EDGE_CURVE('',#272303,#272334,#272336,.T.); +#272334 = VERTEX_POINT('',#272335); +#272335 = CARTESIAN_POINT('',(148.24913,-156.45,1.545)); +#272336 = LINE('',#272337,#272338); +#272337 = CARTESIAN_POINT('',(145.041422,-156.45,1.545)); +#272338 = VECTOR('',#272339,1.); +#272339 = DIRECTION('',(1.,0.,0.)); +#272340 = ORIENTED_EDGE('',*,*,#272341,.F.); +#272341 = EDGE_CURVE('',#272342,#272334,#272344,.T.); +#272342 = VERTEX_POINT('',#272343); +#272343 = CARTESIAN_POINT('',(148.24913,-156.45,1.51)); +#272344 = LINE('',#272345,#272346); +#272345 = CARTESIAN_POINT('',(148.24913,-156.45,1.51)); +#272346 = VECTOR('',#272347,1.); +#272347 = DIRECTION('',(0.,0.,1.)); +#272348 = ORIENTED_EDGE('',*,*,#272349,.F.); +#272349 = EDGE_CURVE('',#272311,#272342,#272350,.T.); +#272350 = LINE('',#272351,#272352); +#272351 = CARTESIAN_POINT('',(145.041422,-156.45,1.51)); +#272352 = VECTOR('',#272353,1.); +#272353 = DIRECTION('',(1.,0.,0.)); +#272354 = PLANE('',#272355); +#272355 = AXIS2_PLACEMENT_3D('',#272356,#272357,#272358); +#272356 = CARTESIAN_POINT('',(145.041422,-156.45,1.51)); +#272357 = DIRECTION('',(0.,1.,0.)); +#272358 = DIRECTION('',(1.,0.,0.)); +#272359 = ADVANCED_FACE('',(#272360),#272385,.T.); +#272360 = FACE_BOUND('',#272361,.T.); +#272361 = EDGE_LOOP('',(#272362,#272363,#272371,#272379)); +#272362 = ORIENTED_EDGE('',*,*,#272341,.T.); +#272363 = ORIENTED_EDGE('',*,*,#272364,.T.); +#272364 = EDGE_CURVE('',#272334,#272365,#272367,.T.); +#272365 = VERTEX_POINT('',#272366); +#272366 = CARTESIAN_POINT('',(148.45,-156.24913,1.545)); +#272367 = LINE('',#272368,#272369); +#272368 = CARTESIAN_POINT('',(148.24913,-156.45,1.545)); +#272369 = VECTOR('',#272370,1.); +#272370 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#272371 = ORIENTED_EDGE('',*,*,#272372,.F.); +#272372 = EDGE_CURVE('',#272373,#272365,#272375,.T.); +#272373 = VERTEX_POINT('',#272374); +#272374 = CARTESIAN_POINT('',(148.45,-156.24913,1.51)); +#272375 = LINE('',#272376,#272377); +#272376 = CARTESIAN_POINT('',(148.45,-156.24913,1.51)); +#272377 = VECTOR('',#272378,1.); +#272378 = DIRECTION('',(0.,0.,1.)); +#272379 = ORIENTED_EDGE('',*,*,#272380,.F.); +#272380 = EDGE_CURVE('',#272342,#272373,#272381,.T.); +#272381 = LINE('',#272382,#272383); +#272382 = CARTESIAN_POINT('',(148.24913,-156.45,1.51)); +#272383 = VECTOR('',#272384,1.); +#272384 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#272385 = PLANE('',#272386); +#272386 = AXIS2_PLACEMENT_3D('',#272387,#272388,#272389); +#272387 = CARTESIAN_POINT('',(148.24913,-156.45,1.51)); +#272388 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#272389 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#272390 = ADVANCED_FACE('',(#272391),#272416,.T.); +#272391 = FACE_BOUND('',#272392,.T.); +#272392 = EDGE_LOOP('',(#272393,#272394,#272402,#272410)); +#272393 = ORIENTED_EDGE('',*,*,#272372,.T.); +#272394 = ORIENTED_EDGE('',*,*,#272395,.T.); +#272395 = EDGE_CURVE('',#272365,#272396,#272398,.T.); +#272396 = VERTEX_POINT('',#272397); +#272397 = CARTESIAN_POINT('',(148.451921,-155.430491,1.545)); +#272398 = LINE('',#272399,#272400); +#272399 = CARTESIAN_POINT('',(148.45,-156.24913,1.545)); +#272400 = VECTOR('',#272401,1.); +#272401 = DIRECTION('',(2.346571212841E-03,0.999997246798,0.)); +#272402 = ORIENTED_EDGE('',*,*,#272403,.F.); +#272403 = EDGE_CURVE('',#272404,#272396,#272406,.T.); +#272404 = VERTEX_POINT('',#272405); +#272405 = CARTESIAN_POINT('',(148.451921,-155.430491,1.51)); +#272406 = LINE('',#272407,#272408); +#272407 = CARTESIAN_POINT('',(148.451921,-155.430491,1.51)); +#272408 = VECTOR('',#272409,1.); +#272409 = DIRECTION('',(0.,0.,1.)); +#272410 = ORIENTED_EDGE('',*,*,#272411,.F.); +#272411 = EDGE_CURVE('',#272373,#272404,#272412,.T.); +#272412 = LINE('',#272413,#272414); +#272413 = CARTESIAN_POINT('',(148.45,-156.24913,1.51)); +#272414 = VECTOR('',#272415,1.); +#272415 = DIRECTION('',(2.346571212841E-03,0.999997246798,0.)); +#272416 = PLANE('',#272417); +#272417 = AXIS2_PLACEMENT_3D('',#272418,#272419,#272420); +#272418 = CARTESIAN_POINT('',(148.45,-156.24913,1.51)); +#272419 = DIRECTION('',(-0.999997246798,2.346571212841E-03,0.)); +#272420 = DIRECTION('',(2.346571212841E-03,0.999997246798,0.)); +#272421 = ADVANCED_FACE('',(#272422),#272447,.T.); +#272422 = FACE_BOUND('',#272423,.T.); +#272423 = EDGE_LOOP('',(#272424,#272425,#272433,#272441)); +#272424 = ORIENTED_EDGE('',*,*,#272403,.T.); +#272425 = ORIENTED_EDGE('',*,*,#272426,.T.); +#272426 = EDGE_CURVE('',#272396,#272427,#272429,.T.); +#272427 = VERTEX_POINT('',#272428); +#272428 = CARTESIAN_POINT('',(148.466853,-155.394443,1.545)); +#272429 = LINE('',#272430,#272431); +#272430 = CARTESIAN_POINT('',(148.451921,-155.430491,1.545)); +#272431 = VECTOR('',#272432,1.); +#272432 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#272433 = ORIENTED_EDGE('',*,*,#272434,.F.); +#272434 = EDGE_CURVE('',#272435,#272427,#272437,.T.); +#272435 = VERTEX_POINT('',#272436); +#272436 = CARTESIAN_POINT('',(148.466853,-155.394443,1.51)); +#272437 = LINE('',#272438,#272439); +#272438 = CARTESIAN_POINT('',(148.466853,-155.394443,1.51)); +#272439 = VECTOR('',#272440,1.); +#272440 = DIRECTION('',(0.,0.,1.)); +#272441 = ORIENTED_EDGE('',*,*,#272442,.F.); +#272442 = EDGE_CURVE('',#272404,#272435,#272443,.T.); +#272443 = LINE('',#272444,#272445); +#272444 = CARTESIAN_POINT('',(148.451921,-155.430491,1.51)); +#272445 = VECTOR('',#272446,1.); +#272446 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#272447 = PLANE('',#272448); +#272448 = AXIS2_PLACEMENT_3D('',#272449,#272450,#272451); +#272449 = CARTESIAN_POINT('',(148.451921,-155.430491,1.51)); +#272450 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272451 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#272452 = ADVANCED_FACE('',(#272453),#272478,.T.); +#272453 = FACE_BOUND('',#272454,.T.); +#272454 = EDGE_LOOP('',(#272455,#272456,#272464,#272472)); +#272455 = ORIENTED_EDGE('',*,*,#272434,.T.); +#272456 = ORIENTED_EDGE('',*,*,#272457,.T.); +#272457 = EDGE_CURVE('',#272427,#272458,#272460,.T.); +#272458 = VERTEX_POINT('',#272459); +#272459 = CARTESIAN_POINT('',(150.4,-153.458578,1.545)); +#272460 = LINE('',#272461,#272462); +#272461 = CARTESIAN_POINT('',(148.466853,-155.394443,1.545)); +#272462 = VECTOR('',#272463,1.); +#272463 = DIRECTION('',(0.706609860827,0.70760335258,0.)); +#272464 = ORIENTED_EDGE('',*,*,#272465,.F.); +#272465 = EDGE_CURVE('',#272466,#272458,#272468,.T.); +#272466 = VERTEX_POINT('',#272467); +#272467 = CARTESIAN_POINT('',(150.4,-153.458578,1.51)); +#272468 = LINE('',#272469,#272470); +#272469 = CARTESIAN_POINT('',(150.4,-153.458578,1.51)); +#272470 = VECTOR('',#272471,1.); +#272471 = DIRECTION('',(0.,0.,1.)); +#272472 = ORIENTED_EDGE('',*,*,#272473,.F.); +#272473 = EDGE_CURVE('',#272435,#272466,#272474,.T.); +#272474 = LINE('',#272475,#272476); +#272475 = CARTESIAN_POINT('',(148.466853,-155.394443,1.51)); +#272476 = VECTOR('',#272477,1.); +#272477 = DIRECTION('',(0.706609860827,0.70760335258,0.)); +#272478 = PLANE('',#272479); +#272479 = AXIS2_PLACEMENT_3D('',#272480,#272481,#272482); +#272480 = CARTESIAN_POINT('',(148.466853,-155.394443,1.51)); +#272481 = DIRECTION('',(-0.70760335258,0.706609860827,0.)); +#272482 = DIRECTION('',(0.706609860827,0.70760335258,0.)); +#272483 = ADVANCED_FACE('',(#272484),#272509,.T.); +#272484 = FACE_BOUND('',#272485,.T.); +#272485 = EDGE_LOOP('',(#272486,#272487,#272495,#272503)); +#272486 = ORIENTED_EDGE('',*,*,#272465,.T.); +#272487 = ORIENTED_EDGE('',*,*,#272488,.T.); +#272488 = EDGE_CURVE('',#272458,#272489,#272491,.T.); +#272489 = VERTEX_POINT('',#272490); +#272490 = CARTESIAN_POINT('',(150.401921,-153.210491,1.545)); +#272491 = LINE('',#272492,#272493); +#272492 = CARTESIAN_POINT('',(150.4,-153.458578,1.545)); +#272493 = VECTOR('',#272494,1.); +#272494 = DIRECTION('',(7.74301923506E-03,0.999970022377,0.)); +#272495 = ORIENTED_EDGE('',*,*,#272496,.F.); +#272496 = EDGE_CURVE('',#272497,#272489,#272499,.T.); +#272497 = VERTEX_POINT('',#272498); +#272498 = CARTESIAN_POINT('',(150.401921,-153.210491,1.51)); +#272499 = LINE('',#272500,#272501); +#272500 = CARTESIAN_POINT('',(150.401921,-153.210491,1.51)); +#272501 = VECTOR('',#272502,1.); +#272502 = DIRECTION('',(0.,0.,1.)); +#272503 = ORIENTED_EDGE('',*,*,#272504,.F.); +#272504 = EDGE_CURVE('',#272466,#272497,#272505,.T.); +#272505 = LINE('',#272506,#272507); +#272506 = CARTESIAN_POINT('',(150.4,-153.458578,1.51)); +#272507 = VECTOR('',#272508,1.); +#272508 = DIRECTION('',(7.74301923506E-03,0.999970022377,0.)); +#272509 = PLANE('',#272510); +#272510 = AXIS2_PLACEMENT_3D('',#272511,#272512,#272513); +#272511 = CARTESIAN_POINT('',(150.4,-153.458578,1.51)); +#272512 = DIRECTION('',(-0.999970022377,7.74301923506E-03,0.)); +#272513 = DIRECTION('',(7.74301923506E-03,0.999970022377,0.)); +#272514 = ADVANCED_FACE('',(#272515),#272542,.T.); +#272515 = FACE_BOUND('',#272516,.T.); +#272516 = EDGE_LOOP('',(#272517,#272518,#272527,#272535)); +#272517 = ORIENTED_EDGE('',*,*,#272496,.T.); +#272518 = ORIENTED_EDGE('',*,*,#272519,.T.); +#272519 = EDGE_CURVE('',#272489,#272520,#272522,.T.); +#272520 = VERTEX_POINT('',#272521); +#272521 = CARTESIAN_POINT('',(150.480491,-153.131921,1.545)); +#272522 = CIRCLE('',#272523,0.100002891901); +#272523 = AXIS2_PLACEMENT_3D('',#272524,#272525,#272526); +#272524 = CARTESIAN_POINT('',(150.50000207103,-153.230002071,1.545)); +#272525 = DIRECTION('',(0.,0.,-1.)); +#272526 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#272527 = ORIENTED_EDGE('',*,*,#272528,.F.); +#272528 = EDGE_CURVE('',#272529,#272520,#272531,.T.); +#272529 = VERTEX_POINT('',#272530); +#272530 = CARTESIAN_POINT('',(150.480491,-153.131921,1.51)); +#272531 = LINE('',#272532,#272533); +#272532 = CARTESIAN_POINT('',(150.480491,-153.131921,1.51)); +#272533 = VECTOR('',#272534,1.); +#272534 = DIRECTION('',(0.,0.,1.)); +#272535 = ORIENTED_EDGE('',*,*,#272536,.F.); +#272536 = EDGE_CURVE('',#272497,#272529,#272537,.T.); +#272537 = CIRCLE('',#272538,0.100002891901); +#272538 = AXIS2_PLACEMENT_3D('',#272539,#272540,#272541); +#272539 = CARTESIAN_POINT('',(150.50000207103,-153.230002071,1.51)); +#272540 = DIRECTION('',(0.,0.,-1.)); +#272541 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#272542 = CYLINDRICAL_SURFACE('',#272543,0.100002891901); +#272543 = AXIS2_PLACEMENT_3D('',#272544,#272545,#272546); +#272544 = CARTESIAN_POINT('',(150.50000207103,-153.230002071,1.51)); +#272545 = DIRECTION('',(0.,0.,-1.)); +#272546 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#272547 = ADVANCED_FACE('',(#272548),#272573,.T.); +#272548 = FACE_BOUND('',#272549,.T.); +#272549 = EDGE_LOOP('',(#272550,#272551,#272559,#272567)); +#272550 = ORIENTED_EDGE('',*,*,#272528,.T.); +#272551 = ORIENTED_EDGE('',*,*,#272552,.T.); +#272552 = EDGE_CURVE('',#272520,#272553,#272555,.T.); +#272553 = VERTEX_POINT('',#272554); +#272554 = CARTESIAN_POINT('',(151.230499,-153.128078,1.545)); +#272555 = LINE('',#272556,#272557); +#272556 = CARTESIAN_POINT('',(150.480491,-153.131921,1.545)); +#272557 = VECTOR('',#272558,1.); +#272558 = DIRECTION('',(0.999986872851,5.12387808181E-03,0.)); +#272559 = ORIENTED_EDGE('',*,*,#272560,.F.); +#272560 = EDGE_CURVE('',#272561,#272553,#272563,.T.); +#272561 = VERTEX_POINT('',#272562); +#272562 = CARTESIAN_POINT('',(151.230499,-153.128078,1.51)); +#272563 = LINE('',#272564,#272565); +#272564 = CARTESIAN_POINT('',(151.230499,-153.128078,1.51)); +#272565 = VECTOR('',#272566,1.); +#272566 = DIRECTION('',(0.,0.,1.)); +#272567 = ORIENTED_EDGE('',*,*,#272568,.F.); +#272568 = EDGE_CURVE('',#272529,#272561,#272569,.T.); +#272569 = LINE('',#272570,#272571); +#272570 = CARTESIAN_POINT('',(150.480491,-153.131921,1.51)); +#272571 = VECTOR('',#272572,1.); +#272572 = DIRECTION('',(0.999986872851,5.12387808181E-03,0.)); +#272573 = PLANE('',#272574); +#272574 = AXIS2_PLACEMENT_3D('',#272575,#272576,#272577); +#272575 = CARTESIAN_POINT('',(150.480491,-153.131921,1.51)); +#272576 = DIRECTION('',(-5.12387808181E-03,0.999986872851,0.)); +#272577 = DIRECTION('',(0.999986872851,5.12387808181E-03,0.)); +#272578 = ADVANCED_FACE('',(#272579),#272604,.T.); +#272579 = FACE_BOUND('',#272580,.T.); +#272580 = EDGE_LOOP('',(#272581,#272582,#272590,#272598)); +#272581 = ORIENTED_EDGE('',*,*,#272560,.T.); +#272582 = ORIENTED_EDGE('',*,*,#272583,.T.); +#272583 = EDGE_CURVE('',#272553,#272584,#272586,.T.); +#272584 = VERTEX_POINT('',#272585); +#272585 = CARTESIAN_POINT('',(151.222836,-153.114805,1.545)); +#272586 = LINE('',#272587,#272588); +#272587 = CARTESIAN_POINT('',(151.230499,-153.128078,1.545)); +#272588 = VECTOR('',#272589,1.); +#272589 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#272590 = ORIENTED_EDGE('',*,*,#272591,.F.); +#272591 = EDGE_CURVE('',#272592,#272584,#272594,.T.); +#272592 = VERTEX_POINT('',#272593); +#272593 = CARTESIAN_POINT('',(151.222836,-153.114805,1.51)); +#272594 = LINE('',#272595,#272596); +#272595 = CARTESIAN_POINT('',(151.222836,-153.114805,1.51)); +#272596 = VECTOR('',#272597,1.); +#272597 = DIRECTION('',(0.,0.,1.)); +#272598 = ORIENTED_EDGE('',*,*,#272599,.F.); +#272599 = EDGE_CURVE('',#272561,#272592,#272600,.T.); +#272600 = LINE('',#272601,#272602); +#272601 = CARTESIAN_POINT('',(151.230499,-153.128078,1.51)); +#272602 = VECTOR('',#272603,1.); +#272603 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#272604 = PLANE('',#272605); +#272605 = AXIS2_PLACEMENT_3D('',#272606,#272607,#272608); +#272606 = CARTESIAN_POINT('',(151.230499,-153.128078,1.51)); +#272607 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#272608 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#272609 = ADVANCED_FACE('',(#272610),#272637,.T.); +#272610 = FACE_BOUND('',#272611,.T.); +#272611 = EDGE_LOOP('',(#272612,#272613,#272622,#272630)); +#272612 = ORIENTED_EDGE('',*,*,#272591,.T.); +#272613 = ORIENTED_EDGE('',*,*,#272614,.T.); +#272614 = EDGE_CURVE('',#272584,#272615,#272617,.T.); +#272615 = VERTEX_POINT('',#272616); +#272616 = CARTESIAN_POINT('',(151.385195,-153.277164,1.545)); +#272617 = CIRCLE('',#272618,0.300000118202); +#272618 = AXIS2_PLACEMENT_3D('',#272619,#272620,#272621); +#272619 = CARTESIAN_POINT('',(151.5,-153.,1.545)); +#272620 = DIRECTION('',(0.,0.,-1.)); +#272621 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#272622 = ORIENTED_EDGE('',*,*,#272623,.F.); +#272623 = EDGE_CURVE('',#272624,#272615,#272626,.T.); +#272624 = VERTEX_POINT('',#272625); +#272625 = CARTESIAN_POINT('',(151.385195,-153.277164,1.51)); +#272626 = LINE('',#272627,#272628); +#272627 = CARTESIAN_POINT('',(151.385195,-153.277164,1.51)); +#272628 = VECTOR('',#272629,1.); +#272629 = DIRECTION('',(0.,0.,1.)); +#272630 = ORIENTED_EDGE('',*,*,#272631,.F.); +#272631 = EDGE_CURVE('',#272592,#272624,#272632,.T.); +#272632 = CIRCLE('',#272633,0.300000118202); +#272633 = AXIS2_PLACEMENT_3D('',#272634,#272635,#272636); +#272634 = CARTESIAN_POINT('',(151.5,-153.,1.51)); +#272635 = DIRECTION('',(0.,0.,-1.)); +#272636 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#272637 = CYLINDRICAL_SURFACE('',#272638,0.300000118202); +#272638 = AXIS2_PLACEMENT_3D('',#272639,#272640,#272641); +#272639 = CARTESIAN_POINT('',(151.5,-153.,1.51)); +#272640 = DIRECTION('',(0.,0.,-1.)); +#272641 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#272642 = ADVANCED_FACE('',(#272643),#272659,.T.); +#272643 = FACE_BOUND('',#272644,.T.); +#272644 = EDGE_LOOP('',(#272645,#272646,#272652,#272653)); +#272645 = ORIENTED_EDGE('',*,*,#272623,.T.); +#272646 = ORIENTED_EDGE('',*,*,#272647,.T.); +#272647 = EDGE_CURVE('',#272615,#271859,#272648,.T.); +#272648 = LINE('',#272649,#272650); +#272649 = CARTESIAN_POINT('',(151.385195,-153.277164,1.545)); +#272650 = VECTOR('',#272651,1.); +#272651 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#272652 = ORIENTED_EDGE('',*,*,#271856,.F.); +#272653 = ORIENTED_EDGE('',*,*,#272654,.F.); +#272654 = EDGE_CURVE('',#272624,#271857,#272655,.T.); +#272655 = LINE('',#272656,#272657); +#272656 = CARTESIAN_POINT('',(151.385195,-153.277164,1.51)); +#272657 = VECTOR('',#272658,1.); +#272658 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#272659 = PLANE('',#272660); +#272660 = AXIS2_PLACEMENT_3D('',#272661,#272662,#272663); +#272661 = CARTESIAN_POINT('',(151.385195,-153.277164,1.51)); +#272662 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#272663 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#272664 = ADVANCED_FACE('',(#272665),#272692,.F.); +#272665 = FACE_BOUND('',#272666,.T.); +#272666 = EDGE_LOOP('',(#272667,#272677,#272684,#272685)); +#272667 = ORIENTED_EDGE('',*,*,#272668,.T.); +#272668 = EDGE_CURVE('',#272669,#272671,#272673,.T.); +#272669 = VERTEX_POINT('',#272670); +#272670 = CARTESIAN_POINT('',(151.637255,-153.,1.51)); +#272671 = VERTEX_POINT('',#272672); +#272672 = CARTESIAN_POINT('',(151.637255,-153.,1.545)); +#272673 = LINE('',#272674,#272675); +#272674 = CARTESIAN_POINT('',(151.637255,-153.,1.51)); +#272675 = VECTOR('',#272676,1.); +#272676 = DIRECTION('',(0.,0.,1.)); +#272677 = ORIENTED_EDGE('',*,*,#272678,.T.); +#272678 = EDGE_CURVE('',#272671,#272671,#272679,.T.); +#272679 = CIRCLE('',#272680,0.137255); +#272680 = AXIS2_PLACEMENT_3D('',#272681,#272682,#272683); +#272681 = CARTESIAN_POINT('',(151.5,-153.,1.545)); +#272682 = DIRECTION('',(0.,0.,1.)); +#272683 = DIRECTION('',(1.,0.,-0.)); +#272684 = ORIENTED_EDGE('',*,*,#272668,.F.); +#272685 = ORIENTED_EDGE('',*,*,#272686,.F.); +#272686 = EDGE_CURVE('',#272669,#272669,#272687,.T.); +#272687 = CIRCLE('',#272688,0.137255); +#272688 = AXIS2_PLACEMENT_3D('',#272689,#272690,#272691); +#272689 = CARTESIAN_POINT('',(151.5,-153.,1.51)); +#272690 = DIRECTION('',(0.,0.,1.)); +#272691 = DIRECTION('',(1.,0.,-0.)); +#272692 = CYLINDRICAL_SURFACE('',#272693,0.137255); +#272693 = AXIS2_PLACEMENT_3D('',#272694,#272695,#272696); +#272694 = CARTESIAN_POINT('',(151.5,-153.,1.51)); +#272695 = DIRECTION('',(-0.,-0.,-1.)); +#272696 = DIRECTION('',(1.,0.,-0.)); +#272697 = ADVANCED_FACE('',(#272698,#272726),#272729,.F.); +#272698 = FACE_BOUND('',#272699,.T.); +#272699 = EDGE_LOOP('',(#272700,#272701,#272702,#272703,#272704,#272705, + #272706,#272707,#272708,#272709,#272710,#272711,#272712,#272713, + #272714,#272715,#272716,#272717,#272718,#272719,#272720,#272721, + #272722,#272723,#272724,#272725)); +#272700 = ORIENTED_EDGE('',*,*,#271882,.T.); +#272701 = ORIENTED_EDGE('',*,*,#271913,.T.); +#272702 = ORIENTED_EDGE('',*,*,#271944,.T.); +#272703 = ORIENTED_EDGE('',*,*,#271975,.T.); +#272704 = ORIENTED_EDGE('',*,*,#272006,.T.); +#272705 = ORIENTED_EDGE('',*,*,#272037,.T.); +#272706 = ORIENTED_EDGE('',*,*,#272068,.T.); +#272707 = ORIENTED_EDGE('',*,*,#272099,.T.); +#272708 = ORIENTED_EDGE('',*,*,#272130,.T.); +#272709 = ORIENTED_EDGE('',*,*,#272161,.T.); +#272710 = ORIENTED_EDGE('',*,*,#272192,.T.); +#272711 = ORIENTED_EDGE('',*,*,#272223,.T.); +#272712 = ORIENTED_EDGE('',*,*,#272254,.T.); +#272713 = ORIENTED_EDGE('',*,*,#272286,.T.); +#272714 = ORIENTED_EDGE('',*,*,#272318,.T.); +#272715 = ORIENTED_EDGE('',*,*,#272349,.T.); +#272716 = ORIENTED_EDGE('',*,*,#272380,.T.); +#272717 = ORIENTED_EDGE('',*,*,#272411,.T.); +#272718 = ORIENTED_EDGE('',*,*,#272442,.T.); +#272719 = ORIENTED_EDGE('',*,*,#272473,.T.); +#272720 = ORIENTED_EDGE('',*,*,#272504,.T.); +#272721 = ORIENTED_EDGE('',*,*,#272536,.T.); +#272722 = ORIENTED_EDGE('',*,*,#272568,.T.); +#272723 = ORIENTED_EDGE('',*,*,#272599,.T.); +#272724 = ORIENTED_EDGE('',*,*,#272631,.T.); +#272725 = ORIENTED_EDGE('',*,*,#272654,.T.); +#272726 = FACE_BOUND('',#272727,.T.); +#272727 = EDGE_LOOP('',(#272728)); +#272728 = ORIENTED_EDGE('',*,*,#272686,.T.); +#272729 = PLANE('',#272730); +#272730 = AXIS2_PLACEMENT_3D('',#272731,#272732,#272733); +#272731 = CARTESIAN_POINT('',(0.,0.,1.51)); +#272732 = DIRECTION('',(0.,0.,1.)); +#272733 = DIRECTION('',(1.,0.,-0.)); +#272734 = ADVANCED_FACE('',(#272735,#272763),#272766,.T.); +#272735 = FACE_BOUND('',#272736,.F.); +#272736 = EDGE_LOOP('',(#272737,#272738,#272739,#272740,#272741,#272742, + #272743,#272744,#272745,#272746,#272747,#272748,#272749,#272750, + #272751,#272752,#272753,#272754,#272755,#272756,#272757,#272758, + #272759,#272760,#272761,#272762)); +#272737 = ORIENTED_EDGE('',*,*,#271866,.T.); +#272738 = ORIENTED_EDGE('',*,*,#271897,.T.); +#272739 = ORIENTED_EDGE('',*,*,#271928,.T.); +#272740 = ORIENTED_EDGE('',*,*,#271959,.T.); +#272741 = ORIENTED_EDGE('',*,*,#271990,.T.); +#272742 = ORIENTED_EDGE('',*,*,#272021,.T.); +#272743 = ORIENTED_EDGE('',*,*,#272052,.T.); +#272744 = ORIENTED_EDGE('',*,*,#272083,.T.); +#272745 = ORIENTED_EDGE('',*,*,#272114,.T.); +#272746 = ORIENTED_EDGE('',*,*,#272145,.T.); +#272747 = ORIENTED_EDGE('',*,*,#272176,.T.); +#272748 = ORIENTED_EDGE('',*,*,#272207,.T.); +#272749 = ORIENTED_EDGE('',*,*,#272238,.T.); +#272750 = ORIENTED_EDGE('',*,*,#272269,.T.); +#272751 = ORIENTED_EDGE('',*,*,#272302,.T.); +#272752 = ORIENTED_EDGE('',*,*,#272333,.T.); +#272753 = ORIENTED_EDGE('',*,*,#272364,.T.); +#272754 = ORIENTED_EDGE('',*,*,#272395,.T.); +#272755 = ORIENTED_EDGE('',*,*,#272426,.T.); +#272756 = ORIENTED_EDGE('',*,*,#272457,.T.); +#272757 = ORIENTED_EDGE('',*,*,#272488,.T.); +#272758 = ORIENTED_EDGE('',*,*,#272519,.T.); +#272759 = ORIENTED_EDGE('',*,*,#272552,.T.); +#272760 = ORIENTED_EDGE('',*,*,#272583,.T.); +#272761 = ORIENTED_EDGE('',*,*,#272614,.T.); +#272762 = ORIENTED_EDGE('',*,*,#272647,.T.); +#272763 = FACE_BOUND('',#272764,.F.); +#272764 = EDGE_LOOP('',(#272765)); +#272765 = ORIENTED_EDGE('',*,*,#272678,.T.); +#272766 = PLANE('',#272767); +#272767 = AXIS2_PLACEMENT_3D('',#272768,#272769,#272770); +#272768 = CARTESIAN_POINT('',(0.,0.,1.545)); +#272769 = DIRECTION('',(0.,0.,1.)); +#272770 = DIRECTION('',(1.,0.,-0.)); +#272771 = MANIFOLD_SOLID_BREP('',#272772); +#272772 = CLOSED_SHELL('',(#272773,#272813,#272844,#272877,#272908, + #272939,#272970,#273001,#273034,#273056,#273089,#273109)); +#272773 = ADVANCED_FACE('',(#272774),#272808,.T.); +#272774 = FACE_BOUND('',#272775,.T.); +#272775 = EDGE_LOOP('',(#272776,#272786,#272794,#272802)); +#272776 = ORIENTED_EDGE('',*,*,#272777,.T.); +#272777 = EDGE_CURVE('',#272778,#272780,#272782,.T.); +#272778 = VERTEX_POINT('',#272779); +#272779 = CARTESIAN_POINT('',(138.8695,-146.628078,1.51)); +#272780 = VERTEX_POINT('',#272781); +#272781 = CARTESIAN_POINT('',(138.8695,-146.628078,1.545)); +#272782 = LINE('',#272783,#272784); +#272783 = CARTESIAN_POINT('',(138.8695,-146.628078,1.51)); +#272784 = VECTOR('',#272785,1.); +#272785 = DIRECTION('',(0.,0.,1.)); +#272786 = ORIENTED_EDGE('',*,*,#272787,.T.); +#272787 = EDGE_CURVE('',#272780,#272788,#272790,.T.); +#272788 = VERTEX_POINT('',#272789); +#272789 = CARTESIAN_POINT('',(138.921422,-146.68,1.545)); +#272790 = LINE('',#272791,#272792); +#272791 = CARTESIAN_POINT('',(138.8695,-146.628078,1.545)); +#272792 = VECTOR('',#272793,1.); +#272793 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#272794 = ORIENTED_EDGE('',*,*,#272795,.F.); +#272795 = EDGE_CURVE('',#272796,#272788,#272798,.T.); +#272796 = VERTEX_POINT('',#272797); +#272797 = CARTESIAN_POINT('',(138.921422,-146.68,1.51)); +#272798 = LINE('',#272799,#272800); +#272799 = CARTESIAN_POINT('',(138.921422,-146.68,1.51)); +#272800 = VECTOR('',#272801,1.); +#272801 = DIRECTION('',(0.,0.,1.)); +#272802 = ORIENTED_EDGE('',*,*,#272803,.F.); +#272803 = EDGE_CURVE('',#272778,#272796,#272804,.T.); +#272804 = LINE('',#272805,#272806); +#272805 = CARTESIAN_POINT('',(138.8695,-146.628078,1.51)); +#272806 = VECTOR('',#272807,1.); +#272807 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#272808 = PLANE('',#272809); +#272809 = AXIS2_PLACEMENT_3D('',#272810,#272811,#272812); +#272810 = CARTESIAN_POINT('',(138.8695,-146.628078,1.51)); +#272811 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#272812 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#272813 = ADVANCED_FACE('',(#272814),#272839,.T.); +#272814 = FACE_BOUND('',#272815,.T.); +#272815 = EDGE_LOOP('',(#272816,#272817,#272825,#272833)); +#272816 = ORIENTED_EDGE('',*,*,#272795,.T.); +#272817 = ORIENTED_EDGE('',*,*,#272818,.T.); +#272818 = EDGE_CURVE('',#272788,#272819,#272821,.T.); +#272819 = VERTEX_POINT('',#272820); +#272820 = CARTESIAN_POINT('',(139.619509,-146.681921,1.545)); +#272821 = LINE('',#272822,#272823); +#272822 = CARTESIAN_POINT('',(138.921422,-146.68,1.545)); +#272823 = VECTOR('',#272824,1.); +#272824 = DIRECTION('',(0.999996213803,-2.751795588083E-03,0.)); +#272825 = ORIENTED_EDGE('',*,*,#272826,.F.); +#272826 = EDGE_CURVE('',#272827,#272819,#272829,.T.); +#272827 = VERTEX_POINT('',#272828); +#272828 = CARTESIAN_POINT('',(139.619509,-146.681921,1.51)); +#272829 = LINE('',#272830,#272831); +#272830 = CARTESIAN_POINT('',(139.619509,-146.681921,1.51)); +#272831 = VECTOR('',#272832,1.); +#272832 = DIRECTION('',(0.,0.,1.)); +#272833 = ORIENTED_EDGE('',*,*,#272834,.F.); +#272834 = EDGE_CURVE('',#272796,#272827,#272835,.T.); +#272835 = LINE('',#272836,#272837); +#272836 = CARTESIAN_POINT('',(138.921422,-146.68,1.51)); +#272837 = VECTOR('',#272838,1.); +#272838 = DIRECTION('',(0.999996213803,-2.751795588083E-03,0.)); +#272839 = PLANE('',#272840); +#272840 = AXIS2_PLACEMENT_3D('',#272841,#272842,#272843); +#272841 = CARTESIAN_POINT('',(138.921422,-146.68,1.51)); +#272842 = DIRECTION('',(2.751795588083E-03,0.999996213803,-0.)); +#272843 = DIRECTION('',(0.999996213803,-2.751795588083E-03,0.)); +#272844 = ADVANCED_FACE('',(#272845),#272872,.T.); +#272845 = FACE_BOUND('',#272846,.T.); +#272846 = EDGE_LOOP('',(#272847,#272848,#272857,#272865)); +#272847 = ORIENTED_EDGE('',*,*,#272826,.T.); +#272848 = ORIENTED_EDGE('',*,*,#272849,.T.); +#272849 = EDGE_CURVE('',#272819,#272850,#272852,.T.); +#272850 = VERTEX_POINT('',#272851); +#272851 = CARTESIAN_POINT('',(139.619509,-146.878079,1.545)); +#272852 = CIRCLE('',#272853,0.100000456609); +#272853 = AXIS2_PLACEMENT_3D('',#272854,#272855,#272856); +#272854 = CARTESIAN_POINT('',(139.6,-146.78,1.545)); +#272855 = DIRECTION('',(0.,0.,-1.)); +#272856 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#272857 = ORIENTED_EDGE('',*,*,#272858,.F.); +#272858 = EDGE_CURVE('',#272859,#272850,#272861,.T.); +#272859 = VERTEX_POINT('',#272860); +#272860 = CARTESIAN_POINT('',(139.619509,-146.878079,1.51)); +#272861 = LINE('',#272862,#272863); +#272862 = CARTESIAN_POINT('',(139.619509,-146.878079,1.51)); +#272863 = VECTOR('',#272864,1.); +#272864 = DIRECTION('',(0.,0.,1.)); +#272865 = ORIENTED_EDGE('',*,*,#272866,.F.); +#272866 = EDGE_CURVE('',#272827,#272859,#272867,.T.); +#272867 = CIRCLE('',#272868,0.100000456609); +#272868 = AXIS2_PLACEMENT_3D('',#272869,#272870,#272871); +#272869 = CARTESIAN_POINT('',(139.6,-146.78,1.51)); +#272870 = DIRECTION('',(0.,0.,-1.)); +#272871 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#272872 = CYLINDRICAL_SURFACE('',#272873,0.100000456609); +#272873 = AXIS2_PLACEMENT_3D('',#272874,#272875,#272876); +#272874 = CARTESIAN_POINT('',(139.6,-146.78,1.51)); +#272875 = DIRECTION('',(0.,0.,-1.)); +#272876 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#272877 = ADVANCED_FACE('',(#272878),#272903,.T.); +#272878 = FACE_BOUND('',#272879,.T.); +#272879 = EDGE_LOOP('',(#272880,#272881,#272889,#272897)); +#272880 = ORIENTED_EDGE('',*,*,#272858,.T.); +#272881 = ORIENTED_EDGE('',*,*,#272882,.T.); +#272882 = EDGE_CURVE('',#272850,#272883,#272885,.T.); +#272883 = VERTEX_POINT('',#272884); +#272884 = CARTESIAN_POINT('',(138.860491,-146.878079,1.545)); +#272885 = LINE('',#272886,#272887); +#272886 = CARTESIAN_POINT('',(139.619509,-146.878079,1.545)); +#272887 = VECTOR('',#272888,1.); +#272888 = DIRECTION('',(-1.,0.,0.)); +#272889 = ORIENTED_EDGE('',*,*,#272890,.F.); +#272890 = EDGE_CURVE('',#272891,#272883,#272893,.T.); +#272891 = VERTEX_POINT('',#272892); +#272892 = CARTESIAN_POINT('',(138.860491,-146.878079,1.51)); +#272893 = LINE('',#272894,#272895); +#272894 = CARTESIAN_POINT('',(138.860491,-146.878079,1.51)); +#272895 = VECTOR('',#272896,1.); +#272896 = DIRECTION('',(0.,0.,1.)); +#272897 = ORIENTED_EDGE('',*,*,#272898,.F.); +#272898 = EDGE_CURVE('',#272859,#272891,#272899,.T.); +#272899 = LINE('',#272900,#272901); +#272900 = CARTESIAN_POINT('',(139.619509,-146.878079,1.51)); +#272901 = VECTOR('',#272902,1.); +#272902 = DIRECTION('',(-1.,0.,0.)); +#272903 = PLANE('',#272904); +#272904 = AXIS2_PLACEMENT_3D('',#272905,#272906,#272907); +#272905 = CARTESIAN_POINT('',(139.619509,-146.878079,1.51)); +#272906 = DIRECTION('',(0.,-1.,0.)); +#272907 = DIRECTION('',(-1.,0.,0.)); +#272908 = ADVANCED_FACE('',(#272909),#272934,.T.); +#272909 = FACE_BOUND('',#272910,.T.); +#272910 = EDGE_LOOP('',(#272911,#272912,#272920,#272928)); +#272911 = ORIENTED_EDGE('',*,*,#272890,.T.); +#272912 = ORIENTED_EDGE('',*,*,#272913,.T.); +#272913 = EDGE_CURVE('',#272883,#272914,#272916,.T.); +#272914 = VERTEX_POINT('',#272915); +#272915 = CARTESIAN_POINT('',(138.824443,-146.863147,1.545)); +#272916 = LINE('',#272917,#272918); +#272917 = CARTESIAN_POINT('',(138.860491,-146.878079,1.545)); +#272918 = VECTOR('',#272919,1.); +#272919 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272920 = ORIENTED_EDGE('',*,*,#272921,.F.); +#272921 = EDGE_CURVE('',#272922,#272914,#272924,.T.); +#272922 = VERTEX_POINT('',#272923); +#272923 = CARTESIAN_POINT('',(138.824443,-146.863147,1.51)); +#272924 = LINE('',#272925,#272926); +#272925 = CARTESIAN_POINT('',(138.824443,-146.863147,1.51)); +#272926 = VECTOR('',#272927,1.); +#272927 = DIRECTION('',(0.,0.,1.)); +#272928 = ORIENTED_EDGE('',*,*,#272929,.F.); +#272929 = EDGE_CURVE('',#272891,#272922,#272930,.T.); +#272930 = LINE('',#272931,#272932); +#272931 = CARTESIAN_POINT('',(138.860491,-146.878079,1.51)); +#272932 = VECTOR('',#272933,1.); +#272933 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272934 = PLANE('',#272935); +#272935 = AXIS2_PLACEMENT_3D('',#272936,#272937,#272938); +#272936 = CARTESIAN_POINT('',(138.860491,-146.878079,1.51)); +#272937 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#272938 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#272939 = ADVANCED_FACE('',(#272940),#272965,.T.); +#272940 = FACE_BOUND('',#272941,.T.); +#272941 = EDGE_LOOP('',(#272942,#272943,#272951,#272959)); +#272942 = ORIENTED_EDGE('',*,*,#272921,.T.); +#272943 = ORIENTED_EDGE('',*,*,#272944,.T.); +#272944 = EDGE_CURVE('',#272914,#272945,#272947,.T.); +#272945 = VERTEX_POINT('',#272946); +#272946 = CARTESIAN_POINT('',(138.728078,-146.7695,1.545)); +#272947 = LINE('',#272948,#272949); +#272948 = CARTESIAN_POINT('',(138.824443,-146.863147,1.545)); +#272949 = VECTOR('',#272950,1.); +#272950 = DIRECTION('',(-0.717148125174,0.696920774952,0.)); +#272951 = ORIENTED_EDGE('',*,*,#272952,.F.); +#272952 = EDGE_CURVE('',#272953,#272945,#272955,.T.); +#272953 = VERTEX_POINT('',#272954); +#272954 = CARTESIAN_POINT('',(138.728078,-146.7695,1.51)); +#272955 = LINE('',#272956,#272957); +#272956 = CARTESIAN_POINT('',(138.728078,-146.7695,1.51)); +#272957 = VECTOR('',#272958,1.); +#272958 = DIRECTION('',(0.,0.,1.)); +#272959 = ORIENTED_EDGE('',*,*,#272960,.F.); +#272960 = EDGE_CURVE('',#272922,#272953,#272961,.T.); +#272961 = LINE('',#272962,#272963); +#272962 = CARTESIAN_POINT('',(138.824443,-146.863147,1.51)); +#272963 = VECTOR('',#272964,1.); +#272964 = DIRECTION('',(-0.717148125174,0.696920774952,0.)); +#272965 = PLANE('',#272966); +#272966 = AXIS2_PLACEMENT_3D('',#272967,#272968,#272969); +#272967 = CARTESIAN_POINT('',(138.824443,-146.863147,1.51)); +#272968 = DIRECTION('',(-0.696920774952,-0.717148125174,0.)); +#272969 = DIRECTION('',(-0.717148125174,0.696920774952,0.)); +#272970 = ADVANCED_FACE('',(#272971),#272996,.T.); +#272971 = FACE_BOUND('',#272972,.T.); +#272972 = EDGE_LOOP('',(#272973,#272974,#272982,#272990)); +#272973 = ORIENTED_EDGE('',*,*,#272952,.T.); +#272974 = ORIENTED_EDGE('',*,*,#272975,.T.); +#272975 = EDGE_CURVE('',#272945,#272976,#272978,.T.); +#272976 = VERTEX_POINT('',#272977); +#272977 = CARTESIAN_POINT('',(138.714805,-146.777164,1.545)); +#272978 = LINE('',#272979,#272980); +#272979 = CARTESIAN_POINT('',(138.728078,-146.7695,1.545)); +#272980 = VECTOR('',#272981,1.); +#272981 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#272982 = ORIENTED_EDGE('',*,*,#272983,.F.); +#272983 = EDGE_CURVE('',#272984,#272976,#272986,.T.); +#272984 = VERTEX_POINT('',#272985); +#272985 = CARTESIAN_POINT('',(138.714805,-146.777164,1.51)); +#272986 = LINE('',#272987,#272988); +#272987 = CARTESIAN_POINT('',(138.714805,-146.777164,1.51)); +#272988 = VECTOR('',#272989,1.); +#272989 = DIRECTION('',(0.,0.,1.)); +#272990 = ORIENTED_EDGE('',*,*,#272991,.F.); +#272991 = EDGE_CURVE('',#272953,#272984,#272992,.T.); +#272992 = LINE('',#272993,#272994); +#272993 = CARTESIAN_POINT('',(138.728078,-146.7695,1.51)); +#272994 = VECTOR('',#272995,1.); +#272995 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#272996 = PLANE('',#272997); +#272997 = AXIS2_PLACEMENT_3D('',#272998,#272999,#273000); +#272998 = CARTESIAN_POINT('',(138.728078,-146.7695,1.51)); +#272999 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#273000 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#273001 = ADVANCED_FACE('',(#273002),#273029,.T.); +#273002 = FACE_BOUND('',#273003,.T.); +#273003 = EDGE_LOOP('',(#273004,#273005,#273014,#273022)); +#273004 = ORIENTED_EDGE('',*,*,#272983,.T.); +#273005 = ORIENTED_EDGE('',*,*,#273006,.T.); +#273006 = EDGE_CURVE('',#272976,#273007,#273009,.T.); +#273007 = VERTEX_POINT('',#273008); +#273008 = CARTESIAN_POINT('',(138.877164,-146.614805,1.545)); +#273009 = CIRCLE('',#273010,0.300000118202); +#273010 = AXIS2_PLACEMENT_3D('',#273011,#273012,#273013); +#273011 = CARTESIAN_POINT('',(138.6,-146.5,1.545)); +#273012 = DIRECTION('',(0.,0.,-1.)); +#273013 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#273014 = ORIENTED_EDGE('',*,*,#273015,.F.); +#273015 = EDGE_CURVE('',#273016,#273007,#273018,.T.); +#273016 = VERTEX_POINT('',#273017); +#273017 = CARTESIAN_POINT('',(138.877164,-146.614805,1.51)); +#273018 = LINE('',#273019,#273020); +#273019 = CARTESIAN_POINT('',(138.877164,-146.614805,1.51)); +#273020 = VECTOR('',#273021,1.); +#273021 = DIRECTION('',(0.,0.,1.)); +#273022 = ORIENTED_EDGE('',*,*,#273023,.F.); +#273023 = EDGE_CURVE('',#272984,#273016,#273024,.T.); +#273024 = CIRCLE('',#273025,0.300000118202); +#273025 = AXIS2_PLACEMENT_3D('',#273026,#273027,#273028); +#273026 = CARTESIAN_POINT('',(138.6,-146.5,1.51)); +#273027 = DIRECTION('',(0.,0.,-1.)); +#273028 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#273029 = CYLINDRICAL_SURFACE('',#273030,0.300000118202); +#273030 = AXIS2_PLACEMENT_3D('',#273031,#273032,#273033); +#273031 = CARTESIAN_POINT('',(138.6,-146.5,1.51)); +#273032 = DIRECTION('',(0.,0.,-1.)); +#273033 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#273034 = ADVANCED_FACE('',(#273035),#273051,.T.); +#273035 = FACE_BOUND('',#273036,.T.); +#273036 = EDGE_LOOP('',(#273037,#273038,#273044,#273045)); +#273037 = ORIENTED_EDGE('',*,*,#273015,.T.); +#273038 = ORIENTED_EDGE('',*,*,#273039,.T.); +#273039 = EDGE_CURVE('',#273007,#272780,#273040,.T.); +#273040 = LINE('',#273041,#273042); +#273041 = CARTESIAN_POINT('',(138.877164,-146.614805,1.545)); +#273042 = VECTOR('',#273043,1.); +#273043 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#273044 = ORIENTED_EDGE('',*,*,#272777,.F.); +#273045 = ORIENTED_EDGE('',*,*,#273046,.F.); +#273046 = EDGE_CURVE('',#273016,#272778,#273047,.T.); +#273047 = LINE('',#273048,#273049); +#273048 = CARTESIAN_POINT('',(138.877164,-146.614805,1.51)); +#273049 = VECTOR('',#273050,1.); +#273050 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#273051 = PLANE('',#273052); +#273052 = AXIS2_PLACEMENT_3D('',#273053,#273054,#273055); +#273053 = CARTESIAN_POINT('',(138.877164,-146.614805,1.51)); +#273054 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#273055 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#273056 = ADVANCED_FACE('',(#273057),#273084,.F.); +#273057 = FACE_BOUND('',#273058,.T.); +#273058 = EDGE_LOOP('',(#273059,#273069,#273076,#273077)); +#273059 = ORIENTED_EDGE('',*,*,#273060,.T.); +#273060 = EDGE_CURVE('',#273061,#273063,#273065,.T.); +#273061 = VERTEX_POINT('',#273062); +#273062 = CARTESIAN_POINT('',(138.737255,-146.5,1.51)); +#273063 = VERTEX_POINT('',#273064); +#273064 = CARTESIAN_POINT('',(138.737255,-146.5,1.545)); +#273065 = LINE('',#273066,#273067); +#273066 = CARTESIAN_POINT('',(138.737255,-146.5,1.51)); +#273067 = VECTOR('',#273068,1.); +#273068 = DIRECTION('',(0.,0.,1.)); +#273069 = ORIENTED_EDGE('',*,*,#273070,.T.); +#273070 = EDGE_CURVE('',#273063,#273063,#273071,.T.); +#273071 = CIRCLE('',#273072,0.137255); +#273072 = AXIS2_PLACEMENT_3D('',#273073,#273074,#273075); +#273073 = CARTESIAN_POINT('',(138.6,-146.5,1.545)); +#273074 = DIRECTION('',(0.,0.,1.)); +#273075 = DIRECTION('',(1.,0.,-0.)); +#273076 = ORIENTED_EDGE('',*,*,#273060,.F.); +#273077 = ORIENTED_EDGE('',*,*,#273078,.F.); +#273078 = EDGE_CURVE('',#273061,#273061,#273079,.T.); +#273079 = CIRCLE('',#273080,0.137255); +#273080 = AXIS2_PLACEMENT_3D('',#273081,#273082,#273083); +#273081 = CARTESIAN_POINT('',(138.6,-146.5,1.51)); +#273082 = DIRECTION('',(0.,0.,1.)); +#273083 = DIRECTION('',(1.,0.,-0.)); +#273084 = CYLINDRICAL_SURFACE('',#273085,0.137255); +#273085 = AXIS2_PLACEMENT_3D('',#273086,#273087,#273088); +#273086 = CARTESIAN_POINT('',(138.6,-146.5,1.51)); +#273087 = DIRECTION('',(-0.,-0.,-1.)); +#273088 = DIRECTION('',(1.,0.,-0.)); +#273089 = ADVANCED_FACE('',(#273090,#273101),#273104,.F.); +#273090 = FACE_BOUND('',#273091,.T.); +#273091 = EDGE_LOOP('',(#273092,#273093,#273094,#273095,#273096,#273097, + #273098,#273099,#273100)); +#273092 = ORIENTED_EDGE('',*,*,#272803,.T.); +#273093 = ORIENTED_EDGE('',*,*,#272834,.T.); +#273094 = ORIENTED_EDGE('',*,*,#272866,.T.); +#273095 = ORIENTED_EDGE('',*,*,#272898,.T.); +#273096 = ORIENTED_EDGE('',*,*,#272929,.T.); +#273097 = ORIENTED_EDGE('',*,*,#272960,.T.); +#273098 = ORIENTED_EDGE('',*,*,#272991,.T.); +#273099 = ORIENTED_EDGE('',*,*,#273023,.T.); +#273100 = ORIENTED_EDGE('',*,*,#273046,.T.); +#273101 = FACE_BOUND('',#273102,.T.); +#273102 = EDGE_LOOP('',(#273103)); +#273103 = ORIENTED_EDGE('',*,*,#273078,.T.); +#273104 = PLANE('',#273105); +#273105 = AXIS2_PLACEMENT_3D('',#273106,#273107,#273108); +#273106 = CARTESIAN_POINT('',(0.,0.,1.51)); +#273107 = DIRECTION('',(0.,0.,1.)); +#273108 = DIRECTION('',(1.,0.,-0.)); +#273109 = ADVANCED_FACE('',(#273110,#273121),#273124,.T.); +#273110 = FACE_BOUND('',#273111,.F.); +#273111 = EDGE_LOOP('',(#273112,#273113,#273114,#273115,#273116,#273117, + #273118,#273119,#273120)); +#273112 = ORIENTED_EDGE('',*,*,#272787,.T.); +#273113 = ORIENTED_EDGE('',*,*,#272818,.T.); +#273114 = ORIENTED_EDGE('',*,*,#272849,.T.); +#273115 = ORIENTED_EDGE('',*,*,#272882,.T.); +#273116 = ORIENTED_EDGE('',*,*,#272913,.T.); +#273117 = ORIENTED_EDGE('',*,*,#272944,.T.); +#273118 = ORIENTED_EDGE('',*,*,#272975,.T.); +#273119 = ORIENTED_EDGE('',*,*,#273006,.T.); +#273120 = ORIENTED_EDGE('',*,*,#273039,.T.); +#273121 = FACE_BOUND('',#273122,.F.); +#273122 = EDGE_LOOP('',(#273123)); +#273123 = ORIENTED_EDGE('',*,*,#273070,.T.); +#273124 = PLANE('',#273125); +#273125 = AXIS2_PLACEMENT_3D('',#273126,#273127,#273128); +#273126 = CARTESIAN_POINT('',(0.,0.,1.545)); +#273127 = DIRECTION('',(0.,0.,1.)); +#273128 = DIRECTION('',(1.,0.,-0.)); +#273129 = MANIFOLD_SOLID_BREP('',#273130); +#273130 = CLOSED_SHELL('',(#273131,#273164,#273197,#273209)); +#273131 = ADVANCED_FACE('',(#273132),#273159,.T.); +#273132 = FACE_BOUND('',#273133,.F.); +#273133 = EDGE_LOOP('',(#273134,#273144,#273151,#273152)); +#273134 = ORIENTED_EDGE('',*,*,#273135,.T.); +#273135 = EDGE_CURVE('',#273136,#273138,#273140,.T.); +#273136 = VERTEX_POINT('',#273137); +#273137 = CARTESIAN_POINT('',(149.85,-132.95,1.51)); +#273138 = VERTEX_POINT('',#273139); +#273139 = CARTESIAN_POINT('',(149.85,-132.95,1.545)); +#273140 = LINE('',#273141,#273142); +#273141 = CARTESIAN_POINT('',(149.85,-132.95,1.51)); +#273142 = VECTOR('',#273143,1.); +#273143 = DIRECTION('',(0.,0.,1.)); +#273144 = ORIENTED_EDGE('',*,*,#273145,.T.); +#273145 = EDGE_CURVE('',#273138,#273138,#273146,.T.); +#273146 = CIRCLE('',#273147,0.3); +#273147 = AXIS2_PLACEMENT_3D('',#273148,#273149,#273150); +#273148 = CARTESIAN_POINT('',(149.55,-132.95,1.545)); +#273149 = DIRECTION('',(0.,0.,1.)); +#273150 = DIRECTION('',(1.,0.,-0.)); +#273151 = ORIENTED_EDGE('',*,*,#273135,.F.); +#273152 = ORIENTED_EDGE('',*,*,#273153,.F.); +#273153 = EDGE_CURVE('',#273136,#273136,#273154,.T.); +#273154 = CIRCLE('',#273155,0.3); +#273155 = AXIS2_PLACEMENT_3D('',#273156,#273157,#273158); +#273156 = CARTESIAN_POINT('',(149.55,-132.95,1.51)); +#273157 = DIRECTION('',(0.,0.,1.)); +#273158 = DIRECTION('',(1.,0.,-0.)); +#273159 = CYLINDRICAL_SURFACE('',#273160,0.3); +#273160 = AXIS2_PLACEMENT_3D('',#273161,#273162,#273163); +#273161 = CARTESIAN_POINT('',(149.55,-132.95,1.51)); +#273162 = DIRECTION('',(-0.,-0.,-1.)); +#273163 = DIRECTION('',(1.,0.,-0.)); +#273164 = ADVANCED_FACE('',(#273165),#273192,.F.); +#273165 = FACE_BOUND('',#273166,.T.); +#273166 = EDGE_LOOP('',(#273167,#273177,#273184,#273185)); +#273167 = ORIENTED_EDGE('',*,*,#273168,.T.); +#273168 = EDGE_CURVE('',#273169,#273171,#273173,.T.); +#273169 = VERTEX_POINT('',#273170); +#273170 = CARTESIAN_POINT('',(149.687255,-132.95,1.51)); +#273171 = VERTEX_POINT('',#273172); +#273172 = CARTESIAN_POINT('',(149.687255,-132.95,1.545)); +#273173 = LINE('',#273174,#273175); +#273174 = CARTESIAN_POINT('',(149.687255,-132.95,1.51)); +#273175 = VECTOR('',#273176,1.); +#273176 = DIRECTION('',(0.,0.,1.)); +#273177 = ORIENTED_EDGE('',*,*,#273178,.T.); +#273178 = EDGE_CURVE('',#273171,#273171,#273179,.T.); +#273179 = CIRCLE('',#273180,0.137255); +#273180 = AXIS2_PLACEMENT_3D('',#273181,#273182,#273183); +#273181 = CARTESIAN_POINT('',(149.55,-132.95,1.545)); +#273182 = DIRECTION('',(0.,0.,1.)); +#273183 = DIRECTION('',(1.,0.,-0.)); +#273184 = ORIENTED_EDGE('',*,*,#273168,.F.); +#273185 = ORIENTED_EDGE('',*,*,#273186,.F.); +#273186 = EDGE_CURVE('',#273169,#273169,#273187,.T.); +#273187 = CIRCLE('',#273188,0.137255); +#273188 = AXIS2_PLACEMENT_3D('',#273189,#273190,#273191); +#273189 = CARTESIAN_POINT('',(149.55,-132.95,1.51)); +#273190 = DIRECTION('',(0.,0.,1.)); +#273191 = DIRECTION('',(1.,0.,-0.)); +#273192 = CYLINDRICAL_SURFACE('',#273193,0.137255); +#273193 = AXIS2_PLACEMENT_3D('',#273194,#273195,#273196); +#273194 = CARTESIAN_POINT('',(149.55,-132.95,1.51)); +#273195 = DIRECTION('',(-0.,-0.,-1.)); +#273196 = DIRECTION('',(1.,0.,-0.)); +#273197 = ADVANCED_FACE('',(#273198,#273201),#273204,.F.); +#273198 = FACE_BOUND('',#273199,.F.); +#273199 = EDGE_LOOP('',(#273200)); +#273200 = ORIENTED_EDGE('',*,*,#273153,.T.); +#273201 = FACE_BOUND('',#273202,.T.); +#273202 = EDGE_LOOP('',(#273203)); +#273203 = ORIENTED_EDGE('',*,*,#273186,.T.); +#273204 = PLANE('',#273205); +#273205 = AXIS2_PLACEMENT_3D('',#273206,#273207,#273208); +#273206 = CARTESIAN_POINT('',(0.,0.,1.51)); +#273207 = DIRECTION('',(0.,0.,1.)); +#273208 = DIRECTION('',(1.,0.,-0.)); +#273209 = ADVANCED_FACE('',(#273210,#273213),#273216,.T.); +#273210 = FACE_BOUND('',#273211,.T.); +#273211 = EDGE_LOOP('',(#273212)); +#273212 = ORIENTED_EDGE('',*,*,#273145,.T.); +#273213 = FACE_BOUND('',#273214,.F.); +#273214 = EDGE_LOOP('',(#273215)); +#273215 = ORIENTED_EDGE('',*,*,#273178,.T.); +#273216 = PLANE('',#273217); +#273217 = AXIS2_PLACEMENT_3D('',#273218,#273219,#273220); +#273218 = CARTESIAN_POINT('',(0.,0.,1.545)); +#273219 = DIRECTION('',(0.,0.,1.)); +#273220 = DIRECTION('',(1.,0.,-0.)); +#273221 = MANIFOLD_SOLID_BREP('',#273222); +#273222 = CLOSED_SHELL('',(#273223,#273265,#273296,#273327,#273358, + #273389,#273420,#273451,#273482,#273513,#273544,#273577,#273608, + #273639,#273670,#273701,#273732,#273754,#273779)); +#273223 = ADVANCED_FACE('',(#273224),#273260,.F.); +#273224 = FACE_BOUND('',#273225,.T.); +#273225 = EDGE_LOOP('',(#273226,#273236,#273245,#273253)); +#273226 = ORIENTED_EDGE('',*,*,#273227,.T.); +#273227 = EDGE_CURVE('',#273228,#273230,#273232,.T.); +#273228 = VERTEX_POINT('',#273229); +#273229 = CARTESIAN_POINT('',(142.235202,-127.876389,1.51)); +#273230 = VERTEX_POINT('',#273231); +#273231 = CARTESIAN_POINT('',(142.235202,-127.876389,1.545)); +#273232 = LINE('',#273233,#273234); +#273233 = CARTESIAN_POINT('',(142.235202,-127.876389,1.51)); +#273234 = VECTOR('',#273235,1.); +#273235 = DIRECTION('',(0.,0.,1.)); +#273236 = ORIENTED_EDGE('',*,*,#273237,.T.); +#273237 = EDGE_CURVE('',#273230,#273238,#273240,.T.); +#273238 = VERTEX_POINT('',#273239); +#273239 = CARTESIAN_POINT('',(142.375746,-127.736316,1.545)); +#273240 = CIRCLE('',#273241,0.305885378942); +#273241 = AXIS2_PLACEMENT_3D('',#273242,#273243,#273244); +#273242 = CARTESIAN_POINT('',(142.10121735618,-127.6014090366,1.545)); +#273243 = DIRECTION('',(0.,0.,1.)); +#273244 = DIRECTION('',(0.438022386954,-0.898964064091,0.)); +#273245 = ORIENTED_EDGE('',*,*,#273246,.F.); +#273246 = EDGE_CURVE('',#273247,#273238,#273249,.T.); +#273247 = VERTEX_POINT('',#273248); +#273248 = CARTESIAN_POINT('',(142.375746,-127.736316,1.51)); +#273249 = LINE('',#273250,#273251); +#273250 = CARTESIAN_POINT('',(142.375746,-127.736316,1.51)); +#273251 = VECTOR('',#273252,1.); +#273252 = DIRECTION('',(0.,0.,1.)); +#273253 = ORIENTED_EDGE('',*,*,#273254,.F.); +#273254 = EDGE_CURVE('',#273228,#273247,#273255,.T.); +#273255 = CIRCLE('',#273256,0.305885378942); +#273256 = AXIS2_PLACEMENT_3D('',#273257,#273258,#273259); +#273257 = CARTESIAN_POINT('',(142.10121735618,-127.6014090366,1.51)); +#273258 = DIRECTION('',(0.,0.,1.)); +#273259 = DIRECTION('',(0.438022386954,-0.898964064091,0.)); +#273260 = CYLINDRICAL_SURFACE('',#273261,0.305885378942); +#273261 = AXIS2_PLACEMENT_3D('',#273262,#273263,#273264); +#273262 = CARTESIAN_POINT('',(142.10121735618,-127.6014090366,1.51)); +#273263 = DIRECTION('',(-0.,-0.,-1.)); +#273264 = DIRECTION('',(0.438022386954,-0.898964064091,0.)); +#273265 = ADVANCED_FACE('',(#273266),#273291,.T.); +#273266 = FACE_BOUND('',#273267,.T.); +#273267 = EDGE_LOOP('',(#273268,#273269,#273277,#273285)); +#273268 = ORIENTED_EDGE('',*,*,#273246,.T.); +#273269 = ORIENTED_EDGE('',*,*,#273270,.T.); +#273270 = EDGE_CURVE('',#273238,#273271,#273273,.T.); +#273271 = VERTEX_POINT('',#273272); +#273272 = CARTESIAN_POINT('',(143.769509,-129.126921,1.545)); +#273273 = LINE('',#273274,#273275); +#273274 = CARTESIAN_POINT('',(142.375746,-127.736316,1.545)); +#273275 = VECTOR('',#273276,1.); +#273276 = DIRECTION('',(0.707908318711,-0.706304334052,0.)); +#273277 = ORIENTED_EDGE('',*,*,#273278,.F.); +#273278 = EDGE_CURVE('',#273279,#273271,#273281,.T.); +#273279 = VERTEX_POINT('',#273280); +#273280 = CARTESIAN_POINT('',(143.769509,-129.126921,1.51)); +#273281 = LINE('',#273282,#273283); +#273282 = CARTESIAN_POINT('',(143.769509,-129.126921,1.51)); +#273283 = VECTOR('',#273284,1.); +#273284 = DIRECTION('',(0.,0.,1.)); +#273285 = ORIENTED_EDGE('',*,*,#273286,.F.); +#273286 = EDGE_CURVE('',#273247,#273279,#273287,.T.); +#273287 = LINE('',#273288,#273289); +#273288 = CARTESIAN_POINT('',(142.375746,-127.736316,1.51)); +#273289 = VECTOR('',#273290,1.); +#273290 = DIRECTION('',(0.707908318711,-0.706304334052,0.)); +#273291 = PLANE('',#273292); +#273292 = AXIS2_PLACEMENT_3D('',#273293,#273294,#273295); +#273293 = CARTESIAN_POINT('',(142.375746,-127.736316,1.51)); +#273294 = DIRECTION('',(0.706304334052,0.707908318711,-0.)); +#273295 = DIRECTION('',(0.707908318711,-0.706304334052,0.)); +#273296 = ADVANCED_FACE('',(#273297),#273322,.T.); +#273297 = FACE_BOUND('',#273298,.T.); +#273298 = EDGE_LOOP('',(#273299,#273300,#273308,#273316)); +#273299 = ORIENTED_EDGE('',*,*,#273278,.T.); +#273300 = ORIENTED_EDGE('',*,*,#273301,.T.); +#273301 = EDGE_CURVE('',#273271,#273302,#273304,.T.); +#273302 = VERTEX_POINT('',#273303); +#273303 = CARTESIAN_POINT('',(143.805557,-129.141853,1.545)); +#273304 = LINE('',#273305,#273306); +#273305 = CARTESIAN_POINT('',(143.769509,-129.126921,1.545)); +#273306 = VECTOR('',#273307,1.); +#273307 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#273308 = ORIENTED_EDGE('',*,*,#273309,.F.); +#273309 = EDGE_CURVE('',#273310,#273302,#273312,.T.); +#273310 = VERTEX_POINT('',#273311); +#273311 = CARTESIAN_POINT('',(143.805557,-129.141853,1.51)); +#273312 = LINE('',#273313,#273314); +#273313 = CARTESIAN_POINT('',(143.805557,-129.141853,1.51)); +#273314 = VECTOR('',#273315,1.); +#273315 = DIRECTION('',(0.,0.,1.)); +#273316 = ORIENTED_EDGE('',*,*,#273317,.F.); +#273317 = EDGE_CURVE('',#273279,#273310,#273318,.T.); +#273318 = LINE('',#273319,#273320); +#273319 = CARTESIAN_POINT('',(143.769509,-129.126921,1.51)); +#273320 = VECTOR('',#273321,1.); +#273321 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#273322 = PLANE('',#273323); +#273323 = AXIS2_PLACEMENT_3D('',#273324,#273325,#273326); +#273324 = CARTESIAN_POINT('',(143.769509,-129.126921,1.51)); +#273325 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#273326 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#273327 = ADVANCED_FACE('',(#273328),#273353,.T.); +#273328 = FACE_BOUND('',#273329,.T.); +#273329 = EDGE_LOOP('',(#273330,#273331,#273339,#273347)); +#273330 = ORIENTED_EDGE('',*,*,#273309,.T.); +#273331 = ORIENTED_EDGE('',*,*,#273332,.T.); +#273332 = EDGE_CURVE('',#273302,#273333,#273335,.T.); +#273333 = VERTEX_POINT('',#273334); +#273334 = CARTESIAN_POINT('',(144.683148,-130.019443,1.545)); +#273335 = LINE('',#273336,#273337); +#273336 = CARTESIAN_POINT('',(143.805557,-129.141853,1.545)); +#273337 = VECTOR('',#273338,1.); +#273338 = DIRECTION('',(0.707107184055,-0.707106378318,0.)); +#273339 = ORIENTED_EDGE('',*,*,#273340,.F.); +#273340 = EDGE_CURVE('',#273341,#273333,#273343,.T.); +#273341 = VERTEX_POINT('',#273342); +#273342 = CARTESIAN_POINT('',(144.683148,-130.019443,1.51)); +#273343 = LINE('',#273344,#273345); +#273344 = CARTESIAN_POINT('',(144.683148,-130.019443,1.51)); +#273345 = VECTOR('',#273346,1.); +#273346 = DIRECTION('',(0.,0.,1.)); +#273347 = ORIENTED_EDGE('',*,*,#273348,.F.); +#273348 = EDGE_CURVE('',#273310,#273341,#273349,.T.); +#273349 = LINE('',#273350,#273351); +#273350 = CARTESIAN_POINT('',(143.805557,-129.141853,1.51)); +#273351 = VECTOR('',#273352,1.); +#273352 = DIRECTION('',(0.707107184055,-0.707106378318,0.)); +#273353 = PLANE('',#273354); +#273354 = AXIS2_PLACEMENT_3D('',#273355,#273356,#273357); +#273355 = CARTESIAN_POINT('',(143.805557,-129.141853,1.51)); +#273356 = DIRECTION('',(0.707106378318,0.707107184055,-0.)); +#273357 = DIRECTION('',(0.707107184055,-0.707106378318,0.)); +#273358 = ADVANCED_FACE('',(#273359),#273384,.T.); +#273359 = FACE_BOUND('',#273360,.T.); +#273360 = EDGE_LOOP('',(#273361,#273362,#273370,#273378)); +#273361 = ORIENTED_EDGE('',*,*,#273340,.T.); +#273362 = ORIENTED_EDGE('',*,*,#273363,.T.); +#273363 = EDGE_CURVE('',#273333,#273364,#273366,.T.); +#273364 = VERTEX_POINT('',#273365); +#273365 = CARTESIAN_POINT('',(144.698079,-130.055491,1.545)); +#273366 = LINE('',#273367,#273368); +#273367 = CARTESIAN_POINT('',(144.683148,-130.019443,1.545)); +#273368 = VECTOR('',#273369,1.); +#273369 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#273370 = ORIENTED_EDGE('',*,*,#273371,.F.); +#273371 = EDGE_CURVE('',#273372,#273364,#273374,.T.); +#273372 = VERTEX_POINT('',#273373); +#273373 = CARTESIAN_POINT('',(144.698079,-130.055491,1.51)); +#273374 = LINE('',#273375,#273376); +#273375 = CARTESIAN_POINT('',(144.698079,-130.055491,1.51)); +#273376 = VECTOR('',#273377,1.); +#273377 = DIRECTION('',(0.,0.,1.)); +#273378 = ORIENTED_EDGE('',*,*,#273379,.F.); +#273379 = EDGE_CURVE('',#273341,#273372,#273380,.T.); +#273380 = LINE('',#273381,#273382); +#273381 = CARTESIAN_POINT('',(144.683148,-130.019443,1.51)); +#273382 = VECTOR('',#273383,1.); +#273383 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#273384 = PLANE('',#273385); +#273385 = AXIS2_PLACEMENT_3D('',#273386,#273387,#273388); +#273386 = CARTESIAN_POINT('',(144.683148,-130.019443,1.51)); +#273387 = DIRECTION('',(0.923884701879,0.382670952169,-0.)); +#273388 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#273389 = ADVANCED_FACE('',(#273390),#273415,.T.); +#273390 = FACE_BOUND('',#273391,.T.); +#273391 = EDGE_LOOP('',(#273392,#273393,#273401,#273409)); +#273392 = ORIENTED_EDGE('',*,*,#273371,.T.); +#273393 = ORIENTED_EDGE('',*,*,#273394,.T.); +#273394 = EDGE_CURVE('',#273364,#273395,#273397,.T.); +#273395 = VERTEX_POINT('',#273396); +#273396 = CARTESIAN_POINT('',(144.698079,-132.669509,1.545)); +#273397 = LINE('',#273398,#273399); +#273398 = CARTESIAN_POINT('',(144.698079,-130.055491,1.545)); +#273399 = VECTOR('',#273400,1.); +#273400 = DIRECTION('',(0.,-1.,0.)); +#273401 = ORIENTED_EDGE('',*,*,#273402,.F.); +#273402 = EDGE_CURVE('',#273403,#273395,#273405,.T.); +#273403 = VERTEX_POINT('',#273404); +#273404 = CARTESIAN_POINT('',(144.698079,-132.669509,1.51)); +#273405 = LINE('',#273406,#273407); +#273406 = CARTESIAN_POINT('',(144.698079,-132.669509,1.51)); +#273407 = VECTOR('',#273408,1.); +#273408 = DIRECTION('',(0.,0.,1.)); +#273409 = ORIENTED_EDGE('',*,*,#273410,.F.); +#273410 = EDGE_CURVE('',#273372,#273403,#273411,.T.); +#273411 = LINE('',#273412,#273413); +#273412 = CARTESIAN_POINT('',(144.698079,-130.055491,1.51)); +#273413 = VECTOR('',#273414,1.); +#273414 = DIRECTION('',(0.,-1.,0.)); +#273415 = PLANE('',#273416); +#273416 = AXIS2_PLACEMENT_3D('',#273417,#273418,#273419); +#273417 = CARTESIAN_POINT('',(144.698079,-130.055491,1.51)); +#273418 = DIRECTION('',(1.,0.,-0.)); +#273419 = DIRECTION('',(0.,-1.,0.)); +#273420 = ADVANCED_FACE('',(#273421),#273446,.T.); +#273421 = FACE_BOUND('',#273422,.T.); +#273422 = EDGE_LOOP('',(#273423,#273424,#273432,#273440)); +#273423 = ORIENTED_EDGE('',*,*,#273402,.T.); +#273424 = ORIENTED_EDGE('',*,*,#273425,.T.); +#273425 = EDGE_CURVE('',#273395,#273426,#273428,.T.); +#273426 = VERTEX_POINT('',#273427); +#273427 = CARTESIAN_POINT('',(144.683147,-132.705557,1.545)); +#273428 = LINE('',#273429,#273430); +#273429 = CARTESIAN_POINT('',(144.698079,-132.669509,1.545)); +#273430 = VECTOR('',#273431,1.); +#273431 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#273432 = ORIENTED_EDGE('',*,*,#273433,.F.); +#273433 = EDGE_CURVE('',#273434,#273426,#273436,.T.); +#273434 = VERTEX_POINT('',#273435); +#273435 = CARTESIAN_POINT('',(144.683147,-132.705557,1.51)); +#273436 = LINE('',#273437,#273438); +#273437 = CARTESIAN_POINT('',(144.683147,-132.705557,1.51)); +#273438 = VECTOR('',#273439,1.); +#273439 = DIRECTION('',(0.,0.,1.)); +#273440 = ORIENTED_EDGE('',*,*,#273441,.F.); +#273441 = EDGE_CURVE('',#273403,#273434,#273442,.T.); +#273442 = LINE('',#273443,#273444); +#273443 = CARTESIAN_POINT('',(144.698079,-132.669509,1.51)); +#273444 = VECTOR('',#273445,1.); +#273445 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#273446 = PLANE('',#273447); +#273447 = AXIS2_PLACEMENT_3D('',#273448,#273449,#273450); +#273448 = CARTESIAN_POINT('',(144.698079,-132.669509,1.51)); +#273449 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#273450 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#273451 = ADVANCED_FACE('',(#273452),#273477,.T.); +#273452 = FACE_BOUND('',#273453,.T.); +#273453 = EDGE_LOOP('',(#273454,#273455,#273463,#273471)); +#273454 = ORIENTED_EDGE('',*,*,#273433,.T.); +#273455 = ORIENTED_EDGE('',*,*,#273456,.T.); +#273456 = EDGE_CURVE('',#273426,#273457,#273459,.T.); +#273457 = VERTEX_POINT('',#273458); +#273458 = CARTESIAN_POINT('',(144.305557,-133.083147,1.545)); +#273459 = LINE('',#273460,#273461); +#273460 = CARTESIAN_POINT('',(144.683147,-132.705557,1.545)); +#273461 = VECTOR('',#273462,1.); +#273462 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273463 = ORIENTED_EDGE('',*,*,#273464,.F.); +#273464 = EDGE_CURVE('',#273465,#273457,#273467,.T.); +#273465 = VERTEX_POINT('',#273466); +#273466 = CARTESIAN_POINT('',(144.305557,-133.083147,1.51)); +#273467 = LINE('',#273468,#273469); +#273468 = CARTESIAN_POINT('',(144.305557,-133.083147,1.51)); +#273469 = VECTOR('',#273470,1.); +#273470 = DIRECTION('',(0.,0.,1.)); +#273471 = ORIENTED_EDGE('',*,*,#273472,.F.); +#273472 = EDGE_CURVE('',#273434,#273465,#273473,.T.); +#273473 = LINE('',#273474,#273475); +#273474 = CARTESIAN_POINT('',(144.683147,-132.705557,1.51)); +#273475 = VECTOR('',#273476,1.); +#273476 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273477 = PLANE('',#273478); +#273478 = AXIS2_PLACEMENT_3D('',#273479,#273480,#273481); +#273479 = CARTESIAN_POINT('',(144.683147,-132.705557,1.51)); +#273480 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#273481 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273482 = ADVANCED_FACE('',(#273483),#273508,.T.); +#273483 = FACE_BOUND('',#273484,.T.); +#273484 = EDGE_LOOP('',(#273485,#273486,#273494,#273502)); +#273485 = ORIENTED_EDGE('',*,*,#273464,.T.); +#273486 = ORIENTED_EDGE('',*,*,#273487,.T.); +#273487 = EDGE_CURVE('',#273457,#273488,#273490,.T.); +#273488 = VERTEX_POINT('',#273489); +#273489 = CARTESIAN_POINT('',(144.269509,-133.098079,1.545)); +#273490 = LINE('',#273491,#273492); +#273491 = CARTESIAN_POINT('',(144.305557,-133.083147,1.545)); +#273492 = VECTOR('',#273493,1.); +#273493 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#273494 = ORIENTED_EDGE('',*,*,#273495,.F.); +#273495 = EDGE_CURVE('',#273496,#273488,#273498,.T.); +#273496 = VERTEX_POINT('',#273497); +#273497 = CARTESIAN_POINT('',(144.269509,-133.098079,1.51)); +#273498 = LINE('',#273499,#273500); +#273499 = CARTESIAN_POINT('',(144.269509,-133.098079,1.51)); +#273500 = VECTOR('',#273501,1.); +#273501 = DIRECTION('',(0.,0.,1.)); +#273502 = ORIENTED_EDGE('',*,*,#273503,.F.); +#273503 = EDGE_CURVE('',#273465,#273496,#273504,.T.); +#273504 = LINE('',#273505,#273506); +#273505 = CARTESIAN_POINT('',(144.305557,-133.083147,1.51)); +#273506 = VECTOR('',#273507,1.); +#273507 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#273508 = PLANE('',#273509); +#273509 = AXIS2_PLACEMENT_3D('',#273510,#273511,#273512); +#273510 = CARTESIAN_POINT('',(144.305557,-133.083147,1.51)); +#273511 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#273512 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#273513 = ADVANCED_FACE('',(#273514),#273539,.T.); +#273514 = FACE_BOUND('',#273515,.T.); +#273515 = EDGE_LOOP('',(#273516,#273517,#273525,#273533)); +#273516 = ORIENTED_EDGE('',*,*,#273495,.T.); +#273517 = ORIENTED_EDGE('',*,*,#273518,.T.); +#273518 = EDGE_CURVE('',#273488,#273519,#273521,.T.); +#273519 = VERTEX_POINT('',#273520); +#273520 = CARTESIAN_POINT('',(142.480491,-133.098079,1.545)); +#273521 = LINE('',#273522,#273523); +#273522 = CARTESIAN_POINT('',(144.269509,-133.098079,1.545)); +#273523 = VECTOR('',#273524,1.); +#273524 = DIRECTION('',(-1.,0.,0.)); +#273525 = ORIENTED_EDGE('',*,*,#273526,.F.); +#273526 = EDGE_CURVE('',#273527,#273519,#273529,.T.); +#273527 = VERTEX_POINT('',#273528); +#273528 = CARTESIAN_POINT('',(142.480491,-133.098079,1.51)); +#273529 = LINE('',#273530,#273531); +#273530 = CARTESIAN_POINT('',(142.480491,-133.098079,1.51)); +#273531 = VECTOR('',#273532,1.); +#273532 = DIRECTION('',(0.,0.,1.)); +#273533 = ORIENTED_EDGE('',*,*,#273534,.F.); +#273534 = EDGE_CURVE('',#273496,#273527,#273535,.T.); +#273535 = LINE('',#273536,#273537); +#273536 = CARTESIAN_POINT('',(144.269509,-133.098079,1.51)); +#273537 = VECTOR('',#273538,1.); +#273538 = DIRECTION('',(-1.,0.,0.)); +#273539 = PLANE('',#273540); +#273540 = AXIS2_PLACEMENT_3D('',#273541,#273542,#273543); +#273541 = CARTESIAN_POINT('',(144.269509,-133.098079,1.51)); +#273542 = DIRECTION('',(0.,-1.,0.)); +#273543 = DIRECTION('',(-1.,0.,0.)); +#273544 = ADVANCED_FACE('',(#273545),#273572,.T.); +#273545 = FACE_BOUND('',#273546,.T.); +#273546 = EDGE_LOOP('',(#273547,#273548,#273557,#273565)); +#273547 = ORIENTED_EDGE('',*,*,#273526,.T.); +#273548 = ORIENTED_EDGE('',*,*,#273549,.T.); +#273549 = EDGE_CURVE('',#273519,#273550,#273552,.T.); +#273550 = VERTEX_POINT('',#273551); +#273551 = CARTESIAN_POINT('',(142.480491,-132.901921,1.545)); +#273552 = CIRCLE('',#273553,0.100000456609); +#273553 = AXIS2_PLACEMENT_3D('',#273554,#273555,#273556); +#273554 = CARTESIAN_POINT('',(142.5,-133.,1.545)); +#273555 = DIRECTION('',(0.,0.,-1.)); +#273556 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#273557 = ORIENTED_EDGE('',*,*,#273558,.F.); +#273558 = EDGE_CURVE('',#273559,#273550,#273561,.T.); +#273559 = VERTEX_POINT('',#273560); +#273560 = CARTESIAN_POINT('',(142.480491,-132.901921,1.51)); +#273561 = LINE('',#273562,#273563); +#273562 = CARTESIAN_POINT('',(142.480491,-132.901921,1.51)); +#273563 = VECTOR('',#273564,1.); +#273564 = DIRECTION('',(0.,0.,1.)); +#273565 = ORIENTED_EDGE('',*,*,#273566,.F.); +#273566 = EDGE_CURVE('',#273527,#273559,#273567,.T.); +#273567 = CIRCLE('',#273568,0.100000456609); +#273568 = AXIS2_PLACEMENT_3D('',#273569,#273570,#273571); +#273569 = CARTESIAN_POINT('',(142.5,-133.,1.51)); +#273570 = DIRECTION('',(0.,0.,-1.)); +#273571 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#273572 = CYLINDRICAL_SURFACE('',#273573,0.100000456609); +#273573 = AXIS2_PLACEMENT_3D('',#273574,#273575,#273576); +#273574 = CARTESIAN_POINT('',(142.5,-133.,1.51)); +#273575 = DIRECTION('',(0.,0.,-1.)); +#273576 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#273577 = ADVANCED_FACE('',(#273578),#273603,.T.); +#273578 = FACE_BOUND('',#273579,.T.); +#273579 = EDGE_LOOP('',(#273580,#273581,#273589,#273597)); +#273580 = ORIENTED_EDGE('',*,*,#273558,.T.); +#273581 = ORIENTED_EDGE('',*,*,#273582,.T.); +#273582 = EDGE_CURVE('',#273550,#273583,#273585,.T.); +#273583 = VERTEX_POINT('',#273584); +#273584 = CARTESIAN_POINT('',(144.208578,-132.9,1.545)); +#273585 = LINE('',#273586,#273587); +#273586 = CARTESIAN_POINT('',(142.480491,-132.901921,1.545)); +#273587 = VECTOR('',#273588,1.); +#273588 = DIRECTION('',(0.999999382136,1.111633160289E-03,0.)); +#273589 = ORIENTED_EDGE('',*,*,#273590,.F.); +#273590 = EDGE_CURVE('',#273591,#273583,#273593,.T.); +#273591 = VERTEX_POINT('',#273592); +#273592 = CARTESIAN_POINT('',(144.208578,-132.9,1.51)); +#273593 = LINE('',#273594,#273595); +#273594 = CARTESIAN_POINT('',(144.208578,-132.9,1.51)); +#273595 = VECTOR('',#273596,1.); +#273596 = DIRECTION('',(0.,0.,1.)); +#273597 = ORIENTED_EDGE('',*,*,#273598,.F.); +#273598 = EDGE_CURVE('',#273559,#273591,#273599,.T.); +#273599 = LINE('',#273600,#273601); +#273600 = CARTESIAN_POINT('',(142.480491,-132.901921,1.51)); +#273601 = VECTOR('',#273602,1.); +#273602 = DIRECTION('',(0.999999382136,1.111633160289E-03,0.)); +#273603 = PLANE('',#273604); +#273604 = AXIS2_PLACEMENT_3D('',#273605,#273606,#273607); +#273605 = CARTESIAN_POINT('',(142.480491,-132.901921,1.51)); +#273606 = DIRECTION('',(-1.111633160289E-03,0.999999382136,0.)); +#273607 = DIRECTION('',(0.999999382136,1.111633160289E-03,0.)); +#273608 = ADVANCED_FACE('',(#273609),#273634,.T.); +#273609 = FACE_BOUND('',#273610,.T.); +#273610 = EDGE_LOOP('',(#273611,#273612,#273620,#273628)); +#273611 = ORIENTED_EDGE('',*,*,#273590,.T.); +#273612 = ORIENTED_EDGE('',*,*,#273613,.T.); +#273613 = EDGE_CURVE('',#273583,#273614,#273616,.T.); +#273614 = VERTEX_POINT('',#273615); +#273615 = CARTESIAN_POINT('',(144.5,-132.608578,1.545)); +#273616 = LINE('',#273617,#273618); +#273617 = CARTESIAN_POINT('',(144.208578,-132.9,1.545)); +#273618 = VECTOR('',#273619,1.); +#273619 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#273620 = ORIENTED_EDGE('',*,*,#273621,.F.); +#273621 = EDGE_CURVE('',#273622,#273614,#273624,.T.); +#273622 = VERTEX_POINT('',#273623); +#273623 = CARTESIAN_POINT('',(144.5,-132.608578,1.51)); +#273624 = LINE('',#273625,#273626); +#273625 = CARTESIAN_POINT('',(144.5,-132.608578,1.51)); +#273626 = VECTOR('',#273627,1.); +#273627 = DIRECTION('',(0.,0.,1.)); +#273628 = ORIENTED_EDGE('',*,*,#273629,.F.); +#273629 = EDGE_CURVE('',#273591,#273622,#273630,.T.); +#273630 = LINE('',#273631,#273632); +#273631 = CARTESIAN_POINT('',(144.208578,-132.9,1.51)); +#273632 = VECTOR('',#273633,1.); +#273633 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#273634 = PLANE('',#273635); +#273635 = AXIS2_PLACEMENT_3D('',#273636,#273637,#273638); +#273636 = CARTESIAN_POINT('',(144.208578,-132.9,1.51)); +#273637 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#273638 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#273639 = ADVANCED_FACE('',(#273640),#273665,.T.); +#273640 = FACE_BOUND('',#273641,.T.); +#273641 = EDGE_LOOP('',(#273642,#273643,#273651,#273659)); +#273642 = ORIENTED_EDGE('',*,*,#273621,.T.); +#273643 = ORIENTED_EDGE('',*,*,#273644,.T.); +#273644 = EDGE_CURVE('',#273614,#273645,#273647,.T.); +#273645 = VERTEX_POINT('',#273646); +#273646 = CARTESIAN_POINT('',(144.5,-130.116421,1.545)); +#273647 = LINE('',#273648,#273649); +#273648 = CARTESIAN_POINT('',(144.5,-132.608578,1.545)); +#273649 = VECTOR('',#273650,1.); +#273650 = DIRECTION('',(0.,1.,0.)); +#273651 = ORIENTED_EDGE('',*,*,#273652,.F.); +#273652 = EDGE_CURVE('',#273653,#273645,#273655,.T.); +#273653 = VERTEX_POINT('',#273654); +#273654 = CARTESIAN_POINT('',(144.5,-130.116421,1.51)); +#273655 = LINE('',#273656,#273657); +#273656 = CARTESIAN_POINT('',(144.5,-130.116421,1.51)); +#273657 = VECTOR('',#273658,1.); +#273658 = DIRECTION('',(0.,0.,1.)); +#273659 = ORIENTED_EDGE('',*,*,#273660,.F.); +#273660 = EDGE_CURVE('',#273622,#273653,#273661,.T.); +#273661 = LINE('',#273662,#273663); +#273662 = CARTESIAN_POINT('',(144.5,-132.608578,1.51)); +#273663 = VECTOR('',#273664,1.); +#273664 = DIRECTION('',(0.,1.,0.)); +#273665 = PLANE('',#273666); +#273666 = AXIS2_PLACEMENT_3D('',#273667,#273668,#273669); +#273667 = CARTESIAN_POINT('',(144.5,-132.608578,1.51)); +#273668 = DIRECTION('',(-1.,0.,0.)); +#273669 = DIRECTION('',(0.,1.,0.)); +#273670 = ADVANCED_FACE('',(#273671),#273696,.T.); +#273671 = FACE_BOUND('',#273672,.T.); +#273672 = EDGE_LOOP('',(#273673,#273674,#273682,#273690)); +#273673 = ORIENTED_EDGE('',*,*,#273652,.T.); +#273674 = ORIENTED_EDGE('',*,*,#273675,.T.); +#273675 = EDGE_CURVE('',#273645,#273676,#273678,.T.); +#273676 = VERTEX_POINT('',#273677); +#273677 = CARTESIAN_POINT('',(143.705491,-129.323079,1.545)); +#273678 = LINE('',#273679,#273680); +#273679 = CARTESIAN_POINT('',(144.5,-130.116421,1.545)); +#273680 = VECTOR('',#273681,1.); +#273681 = DIRECTION('',(-0.707626282167,0.706586898256,0.)); +#273682 = ORIENTED_EDGE('',*,*,#273683,.F.); +#273683 = EDGE_CURVE('',#273684,#273676,#273686,.T.); +#273684 = VERTEX_POINT('',#273685); +#273685 = CARTESIAN_POINT('',(143.705491,-129.323079,1.51)); +#273686 = LINE('',#273687,#273688); +#273687 = CARTESIAN_POINT('',(143.705491,-129.323079,1.51)); +#273688 = VECTOR('',#273689,1.); +#273689 = DIRECTION('',(0.,0.,1.)); +#273690 = ORIENTED_EDGE('',*,*,#273691,.F.); +#273691 = EDGE_CURVE('',#273653,#273684,#273692,.T.); +#273692 = LINE('',#273693,#273694); +#273693 = CARTESIAN_POINT('',(144.5,-130.116421,1.51)); +#273694 = VECTOR('',#273695,1.); +#273695 = DIRECTION('',(-0.707626282167,0.706586898256,0.)); +#273696 = PLANE('',#273697); +#273697 = AXIS2_PLACEMENT_3D('',#273698,#273699,#273700); +#273698 = CARTESIAN_POINT('',(144.5,-130.116421,1.51)); +#273699 = DIRECTION('',(-0.706586898256,-0.707626282167,0.)); +#273700 = DIRECTION('',(-0.707626282167,0.706586898256,0.)); +#273701 = ADVANCED_FACE('',(#273702),#273727,.T.); +#273702 = FACE_BOUND('',#273703,.T.); +#273703 = EDGE_LOOP('',(#273704,#273705,#273713,#273721)); +#273704 = ORIENTED_EDGE('',*,*,#273683,.T.); +#273705 = ORIENTED_EDGE('',*,*,#273706,.T.); +#273706 = EDGE_CURVE('',#273676,#273707,#273709,.T.); +#273707 = VERTEX_POINT('',#273708); +#273708 = CARTESIAN_POINT('',(143.669442,-129.308147,1.545)); +#273709 = LINE('',#273710,#273711); +#273710 = CARTESIAN_POINT('',(143.705491,-129.323079,1.545)); +#273711 = VECTOR('',#273712,1.); +#273712 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#273713 = ORIENTED_EDGE('',*,*,#273714,.F.); +#273714 = EDGE_CURVE('',#273715,#273707,#273717,.T.); +#273715 = VERTEX_POINT('',#273716); +#273716 = CARTESIAN_POINT('',(143.669442,-129.308147,1.51)); +#273717 = LINE('',#273718,#273719); +#273718 = CARTESIAN_POINT('',(143.669442,-129.308147,1.51)); +#273719 = VECTOR('',#273720,1.); +#273720 = DIRECTION('',(0.,0.,1.)); +#273721 = ORIENTED_EDGE('',*,*,#273722,.F.); +#273722 = EDGE_CURVE('',#273684,#273715,#273723,.T.); +#273723 = LINE('',#273724,#273725); +#273724 = CARTESIAN_POINT('',(143.705491,-129.323079,1.51)); +#273725 = VECTOR('',#273726,1.); +#273726 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#273727 = PLANE('',#273728); +#273728 = AXIS2_PLACEMENT_3D('',#273729,#273730,#273731); +#273729 = CARTESIAN_POINT('',(143.705491,-129.323079,1.51)); +#273730 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#273731 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#273732 = ADVANCED_FACE('',(#273733),#273749,.T.); +#273733 = FACE_BOUND('',#273734,.T.); +#273734 = EDGE_LOOP('',(#273735,#273736,#273742,#273743)); +#273735 = ORIENTED_EDGE('',*,*,#273714,.T.); +#273736 = ORIENTED_EDGE('',*,*,#273737,.T.); +#273737 = EDGE_CURVE('',#273707,#273230,#273738,.T.); +#273738 = LINE('',#273739,#273740); +#273739 = CARTESIAN_POINT('',(143.669442,-129.308147,1.545)); +#273740 = VECTOR('',#273741,1.); +#273741 = DIRECTION('',(-0.707718881553,0.706494150501,0.)); +#273742 = ORIENTED_EDGE('',*,*,#273227,.F.); +#273743 = ORIENTED_EDGE('',*,*,#273744,.F.); +#273744 = EDGE_CURVE('',#273715,#273228,#273745,.T.); +#273745 = LINE('',#273746,#273747); +#273746 = CARTESIAN_POINT('',(143.669442,-129.308147,1.51)); +#273747 = VECTOR('',#273748,1.); +#273748 = DIRECTION('',(-0.707718881553,0.706494150501,0.)); +#273749 = PLANE('',#273750); +#273750 = AXIS2_PLACEMENT_3D('',#273751,#273752,#273753); +#273751 = CARTESIAN_POINT('',(143.669442,-129.308147,1.51)); +#273752 = DIRECTION('',(-0.706494150501,-0.707718881553,0.)); +#273753 = DIRECTION('',(-0.707718881553,0.706494150501,0.)); +#273754 = ADVANCED_FACE('',(#273755),#273774,.F.); +#273755 = FACE_BOUND('',#273756,.T.); +#273756 = EDGE_LOOP('',(#273757,#273758,#273759,#273760,#273761,#273762, + #273763,#273764,#273765,#273766,#273767,#273768,#273769,#273770, + #273771,#273772,#273773)); +#273757 = ORIENTED_EDGE('',*,*,#273254,.T.); +#273758 = ORIENTED_EDGE('',*,*,#273286,.T.); +#273759 = ORIENTED_EDGE('',*,*,#273317,.T.); +#273760 = ORIENTED_EDGE('',*,*,#273348,.T.); +#273761 = ORIENTED_EDGE('',*,*,#273379,.T.); +#273762 = ORIENTED_EDGE('',*,*,#273410,.T.); +#273763 = ORIENTED_EDGE('',*,*,#273441,.T.); +#273764 = ORIENTED_EDGE('',*,*,#273472,.T.); +#273765 = ORIENTED_EDGE('',*,*,#273503,.T.); +#273766 = ORIENTED_EDGE('',*,*,#273534,.T.); +#273767 = ORIENTED_EDGE('',*,*,#273566,.T.); +#273768 = ORIENTED_EDGE('',*,*,#273598,.T.); +#273769 = ORIENTED_EDGE('',*,*,#273629,.T.); +#273770 = ORIENTED_EDGE('',*,*,#273660,.T.); +#273771 = ORIENTED_EDGE('',*,*,#273691,.T.); +#273772 = ORIENTED_EDGE('',*,*,#273722,.T.); +#273773 = ORIENTED_EDGE('',*,*,#273744,.T.); +#273774 = PLANE('',#273775); +#273775 = AXIS2_PLACEMENT_3D('',#273776,#273777,#273778); +#273776 = CARTESIAN_POINT('',(0.,0.,1.51)); +#273777 = DIRECTION('',(0.,0.,1.)); +#273778 = DIRECTION('',(1.,0.,-0.)); +#273779 = ADVANCED_FACE('',(#273780),#273799,.T.); +#273780 = FACE_BOUND('',#273781,.F.); +#273781 = EDGE_LOOP('',(#273782,#273783,#273784,#273785,#273786,#273787, + #273788,#273789,#273790,#273791,#273792,#273793,#273794,#273795, + #273796,#273797,#273798)); +#273782 = ORIENTED_EDGE('',*,*,#273237,.T.); +#273783 = ORIENTED_EDGE('',*,*,#273270,.T.); +#273784 = ORIENTED_EDGE('',*,*,#273301,.T.); +#273785 = ORIENTED_EDGE('',*,*,#273332,.T.); +#273786 = ORIENTED_EDGE('',*,*,#273363,.T.); +#273787 = ORIENTED_EDGE('',*,*,#273394,.T.); +#273788 = ORIENTED_EDGE('',*,*,#273425,.T.); +#273789 = ORIENTED_EDGE('',*,*,#273456,.T.); +#273790 = ORIENTED_EDGE('',*,*,#273487,.T.); +#273791 = ORIENTED_EDGE('',*,*,#273518,.T.); +#273792 = ORIENTED_EDGE('',*,*,#273549,.T.); +#273793 = ORIENTED_EDGE('',*,*,#273582,.T.); +#273794 = ORIENTED_EDGE('',*,*,#273613,.T.); +#273795 = ORIENTED_EDGE('',*,*,#273644,.T.); +#273796 = ORIENTED_EDGE('',*,*,#273675,.T.); +#273797 = ORIENTED_EDGE('',*,*,#273706,.T.); +#273798 = ORIENTED_EDGE('',*,*,#273737,.T.); +#273799 = PLANE('',#273800); +#273800 = AXIS2_PLACEMENT_3D('',#273801,#273802,#273803); +#273801 = CARTESIAN_POINT('',(0.,0.,1.545)); +#273802 = DIRECTION('',(0.,0.,1.)); +#273803 = DIRECTION('',(1.,0.,-0.)); +#273804 = MANIFOLD_SOLID_BREP('',#273805); +#273805 = CLOSED_SHELL('',(#273806,#273846,#273877,#273910,#273941, + #273972,#274003,#274034,#274065,#274096,#274127,#274158,#274189, + #274220,#274253,#274284,#274315,#274346,#274377,#274408,#274439, + #274470,#274492,#274522)); +#273806 = ADVANCED_FACE('',(#273807),#273841,.T.); +#273807 = FACE_BOUND('',#273808,.T.); +#273808 = EDGE_LOOP('',(#273809,#273819,#273827,#273835)); +#273809 = ORIENTED_EDGE('',*,*,#273810,.T.); +#273810 = EDGE_CURVE('',#273811,#273813,#273815,.T.); +#273811 = VERTEX_POINT('',#273812); +#273812 = CARTESIAN_POINT('',(141.194443,-127.416853,1.51)); +#273813 = VERTEX_POINT('',#273814); +#273814 = CARTESIAN_POINT('',(141.194443,-127.416853,1.545)); +#273815 = LINE('',#273816,#273817); +#273816 = CARTESIAN_POINT('',(141.194443,-127.416853,1.51)); +#273817 = VECTOR('',#273818,1.); +#273818 = DIRECTION('',(0.,0.,1.)); +#273819 = ORIENTED_EDGE('',*,*,#273820,.T.); +#273820 = EDGE_CURVE('',#273813,#273821,#273823,.T.); +#273821 = VERTEX_POINT('',#273822); +#273822 = CARTESIAN_POINT('',(141.230491,-127.401921,1.545)); +#273823 = LINE('',#273824,#273825); +#273824 = CARTESIAN_POINT('',(141.194443,-127.416853,1.545)); +#273825 = VECTOR('',#273826,1.); +#273826 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#273827 = ORIENTED_EDGE('',*,*,#273828,.F.); +#273828 = EDGE_CURVE('',#273829,#273821,#273831,.T.); +#273829 = VERTEX_POINT('',#273830); +#273830 = CARTESIAN_POINT('',(141.230491,-127.401921,1.51)); +#273831 = LINE('',#273832,#273833); +#273832 = CARTESIAN_POINT('',(141.230491,-127.401921,1.51)); +#273833 = VECTOR('',#273834,1.); +#273834 = DIRECTION('',(0.,0.,1.)); +#273835 = ORIENTED_EDGE('',*,*,#273836,.F.); +#273836 = EDGE_CURVE('',#273811,#273829,#273837,.T.); +#273837 = LINE('',#273838,#273839); +#273838 = CARTESIAN_POINT('',(141.194443,-127.416853,1.51)); +#273839 = VECTOR('',#273840,1.); +#273840 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#273841 = PLANE('',#273842); +#273842 = AXIS2_PLACEMENT_3D('',#273843,#273844,#273845); +#273843 = CARTESIAN_POINT('',(141.194443,-127.416853,1.51)); +#273844 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#273845 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#273846 = ADVANCED_FACE('',(#273847),#273872,.T.); +#273847 = FACE_BOUND('',#273848,.T.); +#273848 = EDGE_LOOP('',(#273849,#273850,#273858,#273866)); +#273849 = ORIENTED_EDGE('',*,*,#273828,.T.); +#273850 = ORIENTED_EDGE('',*,*,#273851,.T.); +#273851 = EDGE_CURVE('',#273821,#273852,#273854,.T.); +#273852 = VERTEX_POINT('',#273853); +#273853 = CARTESIAN_POINT('',(141.567068,-127.401921,1.545)); +#273854 = LINE('',#273855,#273856); +#273855 = CARTESIAN_POINT('',(141.230491,-127.401921,1.545)); +#273856 = VECTOR('',#273857,1.); +#273857 = DIRECTION('',(1.,0.,0.)); +#273858 = ORIENTED_EDGE('',*,*,#273859,.F.); +#273859 = EDGE_CURVE('',#273860,#273852,#273862,.T.); +#273860 = VERTEX_POINT('',#273861); +#273861 = CARTESIAN_POINT('',(141.567068,-127.401921,1.51)); +#273862 = LINE('',#273863,#273864); +#273863 = CARTESIAN_POINT('',(141.567068,-127.401921,1.51)); +#273864 = VECTOR('',#273865,1.); +#273865 = DIRECTION('',(0.,0.,1.)); +#273866 = ORIENTED_EDGE('',*,*,#273867,.F.); +#273867 = EDGE_CURVE('',#273829,#273860,#273868,.T.); +#273868 = LINE('',#273869,#273870); +#273869 = CARTESIAN_POINT('',(141.230491,-127.401921,1.51)); +#273870 = VECTOR('',#273871,1.); +#273871 = DIRECTION('',(1.,0.,0.)); +#273872 = PLANE('',#273873); +#273873 = AXIS2_PLACEMENT_3D('',#273874,#273875,#273876); +#273874 = CARTESIAN_POINT('',(141.230491,-127.401921,1.51)); +#273875 = DIRECTION('',(0.,1.,0.)); +#273876 = DIRECTION('',(1.,0.,0.)); +#273877 = ADVANCED_FACE('',(#273878),#273905,.F.); +#273878 = FACE_BOUND('',#273879,.T.); +#273879 = EDGE_LOOP('',(#273880,#273881,#273890,#273898)); +#273880 = ORIENTED_EDGE('',*,*,#273859,.T.); +#273881 = ORIENTED_EDGE('',*,*,#273882,.T.); +#273882 = EDGE_CURVE('',#273852,#273883,#273885,.T.); +#273883 = VERTEX_POINT('',#273884); +#273884 = CARTESIAN_POINT('',(141.567583,-127.6,1.545)); +#273885 = CIRCLE('',#273886,0.303803200061); +#273886 = AXIS2_PLACEMENT_3D('',#273887,#273888,#273889); +#273887 = CARTESIAN_POINT('',(141.85453089323,-127.5002137738,1.545)); +#273888 = DIRECTION('',(0.,0.,1.)); +#273889 = DIRECTION('',(-0.946214171454,0.323540942912,0.)); +#273890 = ORIENTED_EDGE('',*,*,#273891,.F.); +#273891 = EDGE_CURVE('',#273892,#273883,#273894,.T.); +#273892 = VERTEX_POINT('',#273893); +#273893 = CARTESIAN_POINT('',(141.567583,-127.6,1.51)); +#273894 = LINE('',#273895,#273896); +#273895 = CARTESIAN_POINT('',(141.567583,-127.6,1.51)); +#273896 = VECTOR('',#273897,1.); +#273897 = DIRECTION('',(0.,0.,1.)); +#273898 = ORIENTED_EDGE('',*,*,#273899,.F.); +#273899 = EDGE_CURVE('',#273860,#273892,#273900,.T.); +#273900 = CIRCLE('',#273901,0.303803200061); +#273901 = AXIS2_PLACEMENT_3D('',#273902,#273903,#273904); +#273902 = CARTESIAN_POINT('',(141.85453089323,-127.5002137738,1.51)); +#273903 = DIRECTION('',(0.,0.,1.)); +#273904 = DIRECTION('',(-0.946214171454,0.323540942912,0.)); +#273905 = CYLINDRICAL_SURFACE('',#273906,0.303803200061); +#273906 = AXIS2_PLACEMENT_3D('',#273907,#273908,#273909); +#273907 = CARTESIAN_POINT('',(141.85453089323,-127.5002137738,1.51)); +#273908 = DIRECTION('',(-0.,-0.,-1.)); +#273909 = DIRECTION('',(-0.946214171454,0.323540942912,0.)); +#273910 = ADVANCED_FACE('',(#273911),#273936,.T.); +#273911 = FACE_BOUND('',#273912,.T.); +#273912 = EDGE_LOOP('',(#273913,#273914,#273922,#273930)); +#273913 = ORIENTED_EDGE('',*,*,#273891,.T.); +#273914 = ORIENTED_EDGE('',*,*,#273915,.T.); +#273915 = EDGE_CURVE('',#273883,#273916,#273918,.T.); +#273916 = VERTEX_POINT('',#273917); +#273917 = CARTESIAN_POINT('',(141.291422,-127.6,1.545)); +#273918 = LINE('',#273919,#273920); +#273919 = CARTESIAN_POINT('',(141.567583,-127.6,1.545)); +#273920 = VECTOR('',#273921,1.); +#273921 = DIRECTION('',(-1.,0.,0.)); +#273922 = ORIENTED_EDGE('',*,*,#273923,.F.); +#273923 = EDGE_CURVE('',#273924,#273916,#273926,.T.); +#273924 = VERTEX_POINT('',#273925); +#273925 = CARTESIAN_POINT('',(141.291422,-127.6,1.51)); +#273926 = LINE('',#273927,#273928); +#273927 = CARTESIAN_POINT('',(141.291422,-127.6,1.51)); +#273928 = VECTOR('',#273929,1.); +#273929 = DIRECTION('',(0.,0.,1.)); +#273930 = ORIENTED_EDGE('',*,*,#273931,.F.); +#273931 = EDGE_CURVE('',#273892,#273924,#273932,.T.); +#273932 = LINE('',#273933,#273934); +#273933 = CARTESIAN_POINT('',(141.567583,-127.6,1.51)); +#273934 = VECTOR('',#273935,1.); +#273935 = DIRECTION('',(-1.,0.,0.)); +#273936 = PLANE('',#273937); +#273937 = AXIS2_PLACEMENT_3D('',#273938,#273939,#273940); +#273938 = CARTESIAN_POINT('',(141.567583,-127.6,1.51)); +#273939 = DIRECTION('',(0.,-1.,0.)); +#273940 = DIRECTION('',(-1.,0.,0.)); +#273941 = ADVANCED_FACE('',(#273942),#273967,.T.); +#273942 = FACE_BOUND('',#273943,.T.); +#273943 = EDGE_LOOP('',(#273944,#273945,#273953,#273961)); +#273944 = ORIENTED_EDGE('',*,*,#273923,.T.); +#273945 = ORIENTED_EDGE('',*,*,#273946,.T.); +#273946 = EDGE_CURVE('',#273916,#273947,#273949,.T.); +#273947 = VERTEX_POINT('',#273948); +#273948 = CARTESIAN_POINT('',(141.1155,-127.775922,1.545)); +#273949 = LINE('',#273950,#273951); +#273950 = CARTESIAN_POINT('',(141.291422,-127.6,1.545)); +#273951 = VECTOR('',#273952,1.); +#273952 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273953 = ORIENTED_EDGE('',*,*,#273954,.F.); +#273954 = EDGE_CURVE('',#273955,#273947,#273957,.T.); +#273955 = VERTEX_POINT('',#273956); +#273956 = CARTESIAN_POINT('',(141.1155,-127.775922,1.51)); +#273957 = LINE('',#273958,#273959); +#273958 = CARTESIAN_POINT('',(141.1155,-127.775922,1.51)); +#273959 = VECTOR('',#273960,1.); +#273960 = DIRECTION('',(0.,0.,1.)); +#273961 = ORIENTED_EDGE('',*,*,#273962,.F.); +#273962 = EDGE_CURVE('',#273924,#273955,#273963,.T.); +#273963 = LINE('',#273964,#273965); +#273964 = CARTESIAN_POINT('',(141.291422,-127.6,1.51)); +#273965 = VECTOR('',#273966,1.); +#273966 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273967 = PLANE('',#273968); +#273968 = AXIS2_PLACEMENT_3D('',#273969,#273970,#273971); +#273969 = CARTESIAN_POINT('',(141.291422,-127.6,1.51)); +#273970 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#273971 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#273972 = ADVANCED_FACE('',(#273973),#273998,.T.); +#273973 = FACE_BOUND('',#273974,.T.); +#273974 = EDGE_LOOP('',(#273975,#273976,#273984,#273992)); +#273975 = ORIENTED_EDGE('',*,*,#273954,.T.); +#273976 = ORIENTED_EDGE('',*,*,#273977,.T.); +#273977 = EDGE_CURVE('',#273947,#273978,#273980,.T.); +#273978 = VERTEX_POINT('',#273979); +#273979 = CARTESIAN_POINT('',(141.113579,-127.940143,1.545)); +#273980 = LINE('',#273981,#273982); +#273981 = CARTESIAN_POINT('',(141.1155,-127.775922,1.545)); +#273982 = VECTOR('',#273983,1.); +#273983 = DIRECTION('',(-1.169685109355E-02,-0.999931589497,0.)); +#273984 = ORIENTED_EDGE('',*,*,#273985,.F.); +#273985 = EDGE_CURVE('',#273986,#273978,#273988,.T.); +#273986 = VERTEX_POINT('',#273987); +#273987 = CARTESIAN_POINT('',(141.113579,-127.940143,1.51)); +#273988 = LINE('',#273989,#273990); +#273989 = CARTESIAN_POINT('',(141.113579,-127.940143,1.51)); +#273990 = VECTOR('',#273991,1.); +#273991 = DIRECTION('',(0.,0.,1.)); +#273992 = ORIENTED_EDGE('',*,*,#273993,.F.); +#273993 = EDGE_CURVE('',#273955,#273986,#273994,.T.); +#273994 = LINE('',#273995,#273996); +#273995 = CARTESIAN_POINT('',(141.1155,-127.775922,1.51)); +#273996 = VECTOR('',#273997,1.); +#273997 = DIRECTION('',(-1.169685109355E-02,-0.999931589497,0.)); +#273998 = PLANE('',#273999); +#273999 = AXIS2_PLACEMENT_3D('',#274000,#274001,#274002); +#274000 = CARTESIAN_POINT('',(141.1155,-127.775922,1.51)); +#274001 = DIRECTION('',(0.999931589497,-1.169685109355E-02,0.)); +#274002 = DIRECTION('',(-1.169685109355E-02,-0.999931589497,0.)); +#274003 = ADVANCED_FACE('',(#274004),#274029,.T.); +#274004 = FACE_BOUND('',#274005,.T.); +#274005 = EDGE_LOOP('',(#274006,#274007,#274015,#274023)); +#274006 = ORIENTED_EDGE('',*,*,#273985,.T.); +#274007 = ORIENTED_EDGE('',*,*,#274008,.T.); +#274008 = EDGE_CURVE('',#273978,#274009,#274011,.T.); +#274009 = VERTEX_POINT('',#274010); +#274010 = CARTESIAN_POINT('',(141.098648,-127.976191,1.545)); +#274011 = LINE('',#274012,#274013); +#274012 = CARTESIAN_POINT('',(141.113579,-127.940143,1.545)); +#274013 = VECTOR('',#274014,1.); +#274014 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#274015 = ORIENTED_EDGE('',*,*,#274016,.F.); +#274016 = EDGE_CURVE('',#274017,#274009,#274019,.T.); +#274017 = VERTEX_POINT('',#274018); +#274018 = CARTESIAN_POINT('',(141.098648,-127.976191,1.51)); +#274019 = LINE('',#274020,#274021); +#274020 = CARTESIAN_POINT('',(141.098648,-127.976191,1.51)); +#274021 = VECTOR('',#274022,1.); +#274022 = DIRECTION('',(0.,0.,1.)); +#274023 = ORIENTED_EDGE('',*,*,#274024,.F.); +#274024 = EDGE_CURVE('',#273986,#274017,#274025,.T.); +#274025 = LINE('',#274026,#274027); +#274026 = CARTESIAN_POINT('',(141.113579,-127.940143,1.51)); +#274027 = VECTOR('',#274028,1.); +#274028 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#274029 = PLANE('',#274030); +#274030 = AXIS2_PLACEMENT_3D('',#274031,#274032,#274033); +#274031 = CARTESIAN_POINT('',(141.113579,-127.940143,1.51)); +#274032 = DIRECTION('',(0.923884701879,-0.382670952168,0.)); +#274033 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#274034 = ADVANCED_FACE('',(#274035),#274060,.T.); +#274035 = FACE_BOUND('',#274036,.T.); +#274036 = EDGE_LOOP('',(#274037,#274038,#274046,#274054)); +#274037 = ORIENTED_EDGE('',*,*,#274016,.T.); +#274038 = ORIENTED_EDGE('',*,*,#274039,.T.); +#274039 = EDGE_CURVE('',#274009,#274040,#274042,.T.); +#274040 = VERTEX_POINT('',#274041); +#274041 = CARTESIAN_POINT('',(140.476191,-128.598647,1.545)); +#274042 = LINE('',#274043,#274044); +#274043 = CARTESIAN_POINT('',(141.098648,-127.976191,1.545)); +#274044 = VECTOR('',#274045,1.); +#274045 = DIRECTION('',(-0.707107349183,-0.707106213189,0.)); +#274046 = ORIENTED_EDGE('',*,*,#274047,.F.); +#274047 = EDGE_CURVE('',#274048,#274040,#274050,.T.); +#274048 = VERTEX_POINT('',#274049); +#274049 = CARTESIAN_POINT('',(140.476191,-128.598647,1.51)); +#274050 = LINE('',#274051,#274052); +#274051 = CARTESIAN_POINT('',(140.476191,-128.598647,1.51)); +#274052 = VECTOR('',#274053,1.); +#274053 = DIRECTION('',(0.,0.,1.)); +#274054 = ORIENTED_EDGE('',*,*,#274055,.F.); +#274055 = EDGE_CURVE('',#274017,#274048,#274056,.T.); +#274056 = LINE('',#274057,#274058); +#274057 = CARTESIAN_POINT('',(141.098648,-127.976191,1.51)); +#274058 = VECTOR('',#274059,1.); +#274059 = DIRECTION('',(-0.707107349183,-0.707106213189,0.)); +#274060 = PLANE('',#274061); +#274061 = AXIS2_PLACEMENT_3D('',#274062,#274063,#274064); +#274062 = CARTESIAN_POINT('',(141.098648,-127.976191,1.51)); +#274063 = DIRECTION('',(0.707106213189,-0.707107349183,0.)); +#274064 = DIRECTION('',(-0.707107349183,-0.707106213189,0.)); +#274065 = ADVANCED_FACE('',(#274066),#274091,.T.); +#274066 = FACE_BOUND('',#274067,.T.); +#274067 = EDGE_LOOP('',(#274068,#274069,#274077,#274085)); +#274068 = ORIENTED_EDGE('',*,*,#274047,.T.); +#274069 = ORIENTED_EDGE('',*,*,#274070,.T.); +#274070 = EDGE_CURVE('',#274040,#274071,#274073,.T.); +#274071 = VERTEX_POINT('',#274072); +#274072 = CARTESIAN_POINT('',(140.440143,-128.613579,1.545)); +#274073 = LINE('',#274074,#274075); +#274074 = CARTESIAN_POINT('',(140.476191,-128.598647,1.545)); +#274075 = VECTOR('',#274076,1.); +#274076 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274077 = ORIENTED_EDGE('',*,*,#274078,.F.); +#274078 = EDGE_CURVE('',#274079,#274071,#274081,.T.); +#274079 = VERTEX_POINT('',#274080); +#274080 = CARTESIAN_POINT('',(140.440143,-128.613579,1.51)); +#274081 = LINE('',#274082,#274083); +#274082 = CARTESIAN_POINT('',(140.440143,-128.613579,1.51)); +#274083 = VECTOR('',#274084,1.); +#274084 = DIRECTION('',(0.,0.,1.)); +#274085 = ORIENTED_EDGE('',*,*,#274086,.F.); +#274086 = EDGE_CURVE('',#274048,#274079,#274087,.T.); +#274087 = LINE('',#274088,#274089); +#274088 = CARTESIAN_POINT('',(140.476191,-128.598647,1.51)); +#274089 = VECTOR('',#274090,1.); +#274090 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274091 = PLANE('',#274092); +#274092 = AXIS2_PLACEMENT_3D('',#274093,#274094,#274095); +#274093 = CARTESIAN_POINT('',(140.476191,-128.598647,1.51)); +#274094 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#274095 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274096 = ADVANCED_FACE('',(#274097),#274122,.T.); +#274097 = FACE_BOUND('',#274098,.T.); +#274098 = EDGE_LOOP('',(#274099,#274100,#274108,#274116)); +#274099 = ORIENTED_EDGE('',*,*,#274078,.T.); +#274100 = ORIENTED_EDGE('',*,*,#274101,.T.); +#274101 = EDGE_CURVE('',#274071,#274102,#274104,.T.); +#274102 = VERTEX_POINT('',#274103); +#274103 = CARTESIAN_POINT('',(140.275922,-128.6155,1.545)); +#274104 = LINE('',#274105,#274106); +#274105 = CARTESIAN_POINT('',(140.440143,-128.613579,1.545)); +#274106 = VECTOR('',#274107,1.); +#274107 = DIRECTION('',(-0.999931589497,-1.169685109355E-02,0.)); +#274108 = ORIENTED_EDGE('',*,*,#274109,.F.); +#274109 = EDGE_CURVE('',#274110,#274102,#274112,.T.); +#274110 = VERTEX_POINT('',#274111); +#274111 = CARTESIAN_POINT('',(140.275922,-128.6155,1.51)); +#274112 = LINE('',#274113,#274114); +#274113 = CARTESIAN_POINT('',(140.275922,-128.6155,1.51)); +#274114 = VECTOR('',#274115,1.); +#274115 = DIRECTION('',(0.,0.,1.)); +#274116 = ORIENTED_EDGE('',*,*,#274117,.F.); +#274117 = EDGE_CURVE('',#274079,#274110,#274118,.T.); +#274118 = LINE('',#274119,#274120); +#274119 = CARTESIAN_POINT('',(140.440143,-128.613579,1.51)); +#274120 = VECTOR('',#274121,1.); +#274121 = DIRECTION('',(-0.999931589497,-1.169685109355E-02,0.)); +#274122 = PLANE('',#274123); +#274123 = AXIS2_PLACEMENT_3D('',#274124,#274125,#274126); +#274124 = CARTESIAN_POINT('',(140.440143,-128.613579,1.51)); +#274125 = DIRECTION('',(1.169685109355E-02,-0.999931589497,0.)); +#274126 = DIRECTION('',(-0.999931589497,-1.169685109355E-02,0.)); +#274127 = ADVANCED_FACE('',(#274128),#274153,.T.); +#274128 = FACE_BOUND('',#274129,.T.); +#274129 = EDGE_LOOP('',(#274130,#274131,#274139,#274147)); +#274130 = ORIENTED_EDGE('',*,*,#274109,.T.); +#274131 = ORIENTED_EDGE('',*,*,#274132,.T.); +#274132 = EDGE_CURVE('',#274102,#274133,#274135,.T.); +#274133 = VERTEX_POINT('',#274134); +#274134 = CARTESIAN_POINT('',(138.805557,-130.083147,1.545)); +#274135 = LINE('',#274136,#274137); +#274136 = CARTESIAN_POINT('',(140.275922,-128.6155,1.545)); +#274137 = VECTOR('',#274138,1.); +#274138 = DIRECTION('',(-0.70776063366,-0.706452323545,0.)); +#274139 = ORIENTED_EDGE('',*,*,#274140,.F.); +#274140 = EDGE_CURVE('',#274141,#274133,#274143,.T.); +#274141 = VERTEX_POINT('',#274142); +#274142 = CARTESIAN_POINT('',(138.805557,-130.083147,1.51)); +#274143 = LINE('',#274144,#274145); +#274144 = CARTESIAN_POINT('',(138.805557,-130.083147,1.51)); +#274145 = VECTOR('',#274146,1.); +#274146 = DIRECTION('',(0.,0.,1.)); +#274147 = ORIENTED_EDGE('',*,*,#274148,.F.); +#274148 = EDGE_CURVE('',#274110,#274141,#274149,.T.); +#274149 = LINE('',#274150,#274151); +#274150 = CARTESIAN_POINT('',(140.275922,-128.6155,1.51)); +#274151 = VECTOR('',#274152,1.); +#274152 = DIRECTION('',(-0.70776063366,-0.706452323545,0.)); +#274153 = PLANE('',#274154); +#274154 = AXIS2_PLACEMENT_3D('',#274155,#274156,#274157); +#274155 = CARTESIAN_POINT('',(140.275922,-128.6155,1.51)); +#274156 = DIRECTION('',(0.706452323545,-0.70776063366,0.)); +#274157 = DIRECTION('',(-0.70776063366,-0.706452323545,0.)); +#274158 = ADVANCED_FACE('',(#274159),#274184,.T.); +#274159 = FACE_BOUND('',#274160,.T.); +#274160 = EDGE_LOOP('',(#274161,#274162,#274170,#274178)); +#274161 = ORIENTED_EDGE('',*,*,#274140,.T.); +#274162 = ORIENTED_EDGE('',*,*,#274163,.T.); +#274163 = EDGE_CURVE('',#274133,#274164,#274166,.T.); +#274164 = VERTEX_POINT('',#274165); +#274165 = CARTESIAN_POINT('',(138.769509,-130.098079,1.545)); +#274166 = LINE('',#274167,#274168); +#274167 = CARTESIAN_POINT('',(138.805557,-130.083147,1.545)); +#274168 = VECTOR('',#274169,1.); +#274169 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274170 = ORIENTED_EDGE('',*,*,#274171,.F.); +#274171 = EDGE_CURVE('',#274172,#274164,#274174,.T.); +#274172 = VERTEX_POINT('',#274173); +#274173 = CARTESIAN_POINT('',(138.769509,-130.098079,1.51)); +#274174 = LINE('',#274175,#274176); +#274175 = CARTESIAN_POINT('',(138.769509,-130.098079,1.51)); +#274176 = VECTOR('',#274177,1.); +#274177 = DIRECTION('',(0.,0.,1.)); +#274178 = ORIENTED_EDGE('',*,*,#274179,.F.); +#274179 = EDGE_CURVE('',#274141,#274172,#274180,.T.); +#274180 = LINE('',#274181,#274182); +#274181 = CARTESIAN_POINT('',(138.805557,-130.083147,1.51)); +#274182 = VECTOR('',#274183,1.); +#274183 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274184 = PLANE('',#274185); +#274185 = AXIS2_PLACEMENT_3D('',#274186,#274187,#274188); +#274186 = CARTESIAN_POINT('',(138.805557,-130.083147,1.51)); +#274187 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#274188 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274189 = ADVANCED_FACE('',(#274190),#274215,.T.); +#274190 = FACE_BOUND('',#274191,.T.); +#274191 = EDGE_LOOP('',(#274192,#274193,#274201,#274209)); +#274192 = ORIENTED_EDGE('',*,*,#274171,.T.); +#274193 = ORIENTED_EDGE('',*,*,#274194,.T.); +#274194 = EDGE_CURVE('',#274164,#274195,#274197,.T.); +#274195 = VERTEX_POINT('',#274196); +#274196 = CARTESIAN_POINT('',(137.740491,-130.098079,1.545)); +#274197 = LINE('',#274198,#274199); +#274198 = CARTESIAN_POINT('',(138.769509,-130.098079,1.545)); +#274199 = VECTOR('',#274200,1.); +#274200 = DIRECTION('',(-1.,0.,0.)); +#274201 = ORIENTED_EDGE('',*,*,#274202,.F.); +#274202 = EDGE_CURVE('',#274203,#274195,#274205,.T.); +#274203 = VERTEX_POINT('',#274204); +#274204 = CARTESIAN_POINT('',(137.740491,-130.098079,1.51)); +#274205 = LINE('',#274206,#274207); +#274206 = CARTESIAN_POINT('',(137.740491,-130.098079,1.51)); +#274207 = VECTOR('',#274208,1.); +#274208 = DIRECTION('',(0.,0.,1.)); +#274209 = ORIENTED_EDGE('',*,*,#274210,.F.); +#274210 = EDGE_CURVE('',#274172,#274203,#274211,.T.); +#274211 = LINE('',#274212,#274213); +#274212 = CARTESIAN_POINT('',(138.769509,-130.098079,1.51)); +#274213 = VECTOR('',#274214,1.); +#274214 = DIRECTION('',(-1.,0.,0.)); +#274215 = PLANE('',#274216); +#274216 = AXIS2_PLACEMENT_3D('',#274217,#274218,#274219); +#274217 = CARTESIAN_POINT('',(138.769509,-130.098079,1.51)); +#274218 = DIRECTION('',(0.,-1.,0.)); +#274219 = DIRECTION('',(-1.,0.,0.)); +#274220 = ADVANCED_FACE('',(#274221),#274248,.T.); +#274221 = FACE_BOUND('',#274222,.T.); +#274222 = EDGE_LOOP('',(#274223,#274224,#274233,#274241)); +#274223 = ORIENTED_EDGE('',*,*,#274202,.T.); +#274224 = ORIENTED_EDGE('',*,*,#274225,.T.); +#274225 = EDGE_CURVE('',#274195,#274226,#274228,.T.); +#274226 = VERTEX_POINT('',#274227); +#274227 = CARTESIAN_POINT('',(137.740491,-129.901921,1.545)); +#274228 = CIRCLE('',#274229,0.100000456609); +#274229 = AXIS2_PLACEMENT_3D('',#274230,#274231,#274232); +#274230 = CARTESIAN_POINT('',(137.76,-130.,1.545)); +#274231 = DIRECTION('',(0.,0.,-1.)); +#274232 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#274233 = ORIENTED_EDGE('',*,*,#274234,.F.); +#274234 = EDGE_CURVE('',#274235,#274226,#274237,.T.); +#274235 = VERTEX_POINT('',#274236); +#274236 = CARTESIAN_POINT('',(137.740491,-129.901921,1.51)); +#274237 = LINE('',#274238,#274239); +#274238 = CARTESIAN_POINT('',(137.740491,-129.901921,1.51)); +#274239 = VECTOR('',#274240,1.); +#274240 = DIRECTION('',(0.,0.,1.)); +#274241 = ORIENTED_EDGE('',*,*,#274242,.F.); +#274242 = EDGE_CURVE('',#274203,#274235,#274243,.T.); +#274243 = CIRCLE('',#274244,0.100000456609); +#274244 = AXIS2_PLACEMENT_3D('',#274245,#274246,#274247); +#274245 = CARTESIAN_POINT('',(137.76,-130.,1.51)); +#274246 = DIRECTION('',(0.,0.,-1.)); +#274247 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#274248 = CYLINDRICAL_SURFACE('',#274249,0.100000456609); +#274249 = AXIS2_PLACEMENT_3D('',#274250,#274251,#274252); +#274250 = CARTESIAN_POINT('',(137.76,-130.,1.51)); +#274251 = DIRECTION('',(0.,0.,-1.)); +#274252 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#274253 = ADVANCED_FACE('',(#274254),#274279,.T.); +#274254 = FACE_BOUND('',#274255,.T.); +#274255 = EDGE_LOOP('',(#274256,#274257,#274265,#274273)); +#274256 = ORIENTED_EDGE('',*,*,#274234,.T.); +#274257 = ORIENTED_EDGE('',*,*,#274258,.T.); +#274258 = EDGE_CURVE('',#274226,#274259,#274261,.T.); +#274259 = VERTEX_POINT('',#274260); +#274260 = CARTESIAN_POINT('',(138.708578,-129.9,1.545)); +#274261 = LINE('',#274262,#274263); +#274262 = CARTESIAN_POINT('',(137.740491,-129.901921,1.545)); +#274263 = VECTOR('',#274264,1.); +#274264 = DIRECTION('',(0.999998031231,1.984321882204E-03,0.)); +#274265 = ORIENTED_EDGE('',*,*,#274266,.F.); +#274266 = EDGE_CURVE('',#274267,#274259,#274269,.T.); +#274267 = VERTEX_POINT('',#274268); +#274268 = CARTESIAN_POINT('',(138.708578,-129.9,1.51)); +#274269 = LINE('',#274270,#274271); +#274270 = CARTESIAN_POINT('',(138.708578,-129.9,1.51)); +#274271 = VECTOR('',#274272,1.); +#274272 = DIRECTION('',(0.,0.,1.)); +#274273 = ORIENTED_EDGE('',*,*,#274274,.F.); +#274274 = EDGE_CURVE('',#274235,#274267,#274275,.T.); +#274275 = LINE('',#274276,#274277); +#274276 = CARTESIAN_POINT('',(137.740491,-129.901921,1.51)); +#274277 = VECTOR('',#274278,1.); +#274278 = DIRECTION('',(0.999998031231,1.984321882204E-03,0.)); +#274279 = PLANE('',#274280); +#274280 = AXIS2_PLACEMENT_3D('',#274281,#274282,#274283); +#274281 = CARTESIAN_POINT('',(137.740491,-129.901921,1.51)); +#274282 = DIRECTION('',(-1.984321882204E-03,0.999998031231,0.)); +#274283 = DIRECTION('',(0.999998031231,1.984321882204E-03,0.)); +#274284 = ADVANCED_FACE('',(#274285),#274310,.T.); +#274285 = FACE_BOUND('',#274286,.T.); +#274286 = EDGE_LOOP('',(#274287,#274288,#274296,#274304)); +#274287 = ORIENTED_EDGE('',*,*,#274266,.T.); +#274288 = ORIENTED_EDGE('',*,*,#274289,.T.); +#274289 = EDGE_CURVE('',#274259,#274290,#274292,.T.); +#274290 = VERTEX_POINT('',#274291); +#274291 = CARTESIAN_POINT('',(140.178943,-128.432353,1.545)); +#274292 = LINE('',#274293,#274294); +#274293 = CARTESIAN_POINT('',(138.708578,-129.9,1.545)); +#274294 = VECTOR('',#274295,1.); +#274295 = DIRECTION('',(0.70776063366,0.706452323545,0.)); +#274296 = ORIENTED_EDGE('',*,*,#274297,.F.); +#274297 = EDGE_CURVE('',#274298,#274290,#274300,.T.); +#274298 = VERTEX_POINT('',#274299); +#274299 = CARTESIAN_POINT('',(140.178943,-128.432353,1.51)); +#274300 = LINE('',#274301,#274302); +#274301 = CARTESIAN_POINT('',(140.178943,-128.432353,1.51)); +#274302 = VECTOR('',#274303,1.); +#274303 = DIRECTION('',(0.,0.,1.)); +#274304 = ORIENTED_EDGE('',*,*,#274305,.F.); +#274305 = EDGE_CURVE('',#274267,#274298,#274306,.T.); +#274306 = LINE('',#274307,#274308); +#274307 = CARTESIAN_POINT('',(138.708578,-129.9,1.51)); +#274308 = VECTOR('',#274309,1.); +#274309 = DIRECTION('',(0.70776063366,0.706452323545,0.)); +#274310 = PLANE('',#274311); +#274311 = AXIS2_PLACEMENT_3D('',#274312,#274313,#274314); +#274312 = CARTESIAN_POINT('',(138.708578,-129.9,1.51)); +#274313 = DIRECTION('',(-0.706452323545,0.70776063366,0.)); +#274314 = DIRECTION('',(0.70776063366,0.706452323545,0.)); +#274315 = ADVANCED_FACE('',(#274316),#274341,.T.); +#274316 = FACE_BOUND('',#274317,.T.); +#274317 = EDGE_LOOP('',(#274318,#274319,#274327,#274335)); +#274318 = ORIENTED_EDGE('',*,*,#274297,.T.); +#274319 = ORIENTED_EDGE('',*,*,#274320,.T.); +#274320 = EDGE_CURVE('',#274290,#274321,#274323,.T.); +#274321 = VERTEX_POINT('',#274322); +#274322 = CARTESIAN_POINT('',(140.214991,-128.417421,1.545)); +#274323 = LINE('',#274324,#274325); +#274324 = CARTESIAN_POINT('',(140.178943,-128.432353,1.545)); +#274325 = VECTOR('',#274326,1.); +#274326 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#274327 = ORIENTED_EDGE('',*,*,#274328,.F.); +#274328 = EDGE_CURVE('',#274329,#274321,#274331,.T.); +#274329 = VERTEX_POINT('',#274330); +#274330 = CARTESIAN_POINT('',(140.214991,-128.417421,1.51)); +#274331 = LINE('',#274332,#274333); +#274332 = CARTESIAN_POINT('',(140.214991,-128.417421,1.51)); +#274333 = VECTOR('',#274334,1.); +#274334 = DIRECTION('',(0.,0.,1.)); +#274335 = ORIENTED_EDGE('',*,*,#274336,.F.); +#274336 = EDGE_CURVE('',#274298,#274329,#274337,.T.); +#274337 = LINE('',#274338,#274339); +#274338 = CARTESIAN_POINT('',(140.178943,-128.432353,1.51)); +#274339 = VECTOR('',#274340,1.); +#274340 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#274341 = PLANE('',#274342); +#274342 = AXIS2_PLACEMENT_3D('',#274343,#274344,#274345); +#274343 = CARTESIAN_POINT('',(140.178943,-128.432353,1.51)); +#274344 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#274345 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#274346 = ADVANCED_FACE('',(#274347),#274372,.T.); +#274347 = FACE_BOUND('',#274348,.T.); +#274348 = EDGE_LOOP('',(#274349,#274350,#274358,#274366)); +#274349 = ORIENTED_EDGE('',*,*,#274328,.T.); +#274350 = ORIENTED_EDGE('',*,*,#274351,.T.); +#274351 = EDGE_CURVE('',#274321,#274352,#274354,.T.); +#274352 = VERTEX_POINT('',#274353); +#274353 = CARTESIAN_POINT('',(140.379212,-128.4155,1.545)); +#274354 = LINE('',#274355,#274356); +#274355 = CARTESIAN_POINT('',(140.214991,-128.417421,1.545)); +#274356 = VECTOR('',#274357,1.); +#274357 = DIRECTION('',(0.999931589497,1.169685109338E-02,0.)); +#274358 = ORIENTED_EDGE('',*,*,#274359,.F.); +#274359 = EDGE_CURVE('',#274360,#274352,#274362,.T.); +#274360 = VERTEX_POINT('',#274361); +#274361 = CARTESIAN_POINT('',(140.379212,-128.4155,1.51)); +#274362 = LINE('',#274363,#274364); +#274363 = CARTESIAN_POINT('',(140.379212,-128.4155,1.51)); +#274364 = VECTOR('',#274365,1.); +#274365 = DIRECTION('',(0.,0.,1.)); +#274366 = ORIENTED_EDGE('',*,*,#274367,.F.); +#274367 = EDGE_CURVE('',#274329,#274360,#274368,.T.); +#274368 = LINE('',#274369,#274370); +#274369 = CARTESIAN_POINT('',(140.214991,-128.417421,1.51)); +#274370 = VECTOR('',#274371,1.); +#274371 = DIRECTION('',(0.999931589497,1.169685109338E-02,0.)); +#274372 = PLANE('',#274373); +#274373 = AXIS2_PLACEMENT_3D('',#274374,#274375,#274376); +#274374 = CARTESIAN_POINT('',(140.214991,-128.417421,1.51)); +#274375 = DIRECTION('',(-1.169685109338E-02,0.999931589497,0.)); +#274376 = DIRECTION('',(0.999931589497,1.169685109338E-02,0.)); +#274377 = ADVANCED_FACE('',(#274378),#274403,.T.); +#274378 = FACE_BOUND('',#274379,.T.); +#274379 = EDGE_LOOP('',(#274380,#274381,#274389,#274397)); +#274380 = ORIENTED_EDGE('',*,*,#274359,.T.); +#274381 = ORIENTED_EDGE('',*,*,#274382,.T.); +#274382 = EDGE_CURVE('',#274352,#274383,#274385,.T.); +#274383 = VERTEX_POINT('',#274384); +#274384 = CARTESIAN_POINT('',(140.9155,-127.879212,1.545)); +#274385 = LINE('',#274386,#274387); +#274386 = CARTESIAN_POINT('',(140.379212,-128.4155,1.545)); +#274387 = VECTOR('',#274388,1.); +#274388 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274389 = ORIENTED_EDGE('',*,*,#274390,.F.); +#274390 = EDGE_CURVE('',#274391,#274383,#274393,.T.); +#274391 = VERTEX_POINT('',#274392); +#274392 = CARTESIAN_POINT('',(140.9155,-127.879212,1.51)); +#274393 = LINE('',#274394,#274395); +#274394 = CARTESIAN_POINT('',(140.9155,-127.879212,1.51)); +#274395 = VECTOR('',#274396,1.); +#274396 = DIRECTION('',(0.,0.,1.)); +#274397 = ORIENTED_EDGE('',*,*,#274398,.F.); +#274398 = EDGE_CURVE('',#274360,#274391,#274399,.T.); +#274399 = LINE('',#274400,#274401); +#274400 = CARTESIAN_POINT('',(140.379212,-128.4155,1.51)); +#274401 = VECTOR('',#274402,1.); +#274402 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274403 = PLANE('',#274404); +#274404 = AXIS2_PLACEMENT_3D('',#274405,#274406,#274407); +#274405 = CARTESIAN_POINT('',(140.379212,-128.4155,1.51)); +#274406 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#274407 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274408 = ADVANCED_FACE('',(#274409),#274434,.T.); +#274409 = FACE_BOUND('',#274410,.T.); +#274410 = EDGE_LOOP('',(#274411,#274412,#274420,#274428)); +#274411 = ORIENTED_EDGE('',*,*,#274390,.T.); +#274412 = ORIENTED_EDGE('',*,*,#274413,.T.); +#274413 = EDGE_CURVE('',#274383,#274414,#274416,.T.); +#274414 = VERTEX_POINT('',#274415); +#274415 = CARTESIAN_POINT('',(140.917421,-127.714991,1.545)); +#274416 = LINE('',#274417,#274418); +#274417 = CARTESIAN_POINT('',(140.9155,-127.879212,1.545)); +#274418 = VECTOR('',#274419,1.); +#274419 = DIRECTION('',(1.169685109338E-02,0.999931589497,0.)); +#274420 = ORIENTED_EDGE('',*,*,#274421,.F.); +#274421 = EDGE_CURVE('',#274422,#274414,#274424,.T.); +#274422 = VERTEX_POINT('',#274423); +#274423 = CARTESIAN_POINT('',(140.917421,-127.714991,1.51)); +#274424 = LINE('',#274425,#274426); +#274425 = CARTESIAN_POINT('',(140.917421,-127.714991,1.51)); +#274426 = VECTOR('',#274427,1.); +#274427 = DIRECTION('',(0.,0.,1.)); +#274428 = ORIENTED_EDGE('',*,*,#274429,.F.); +#274429 = EDGE_CURVE('',#274391,#274422,#274430,.T.); +#274430 = LINE('',#274431,#274432); +#274431 = CARTESIAN_POINT('',(140.9155,-127.879212,1.51)); +#274432 = VECTOR('',#274433,1.); +#274433 = DIRECTION('',(1.169685109338E-02,0.999931589497,0.)); +#274434 = PLANE('',#274435); +#274435 = AXIS2_PLACEMENT_3D('',#274436,#274437,#274438); +#274436 = CARTESIAN_POINT('',(140.9155,-127.879212,1.51)); +#274437 = DIRECTION('',(-0.999931589497,1.169685109338E-02,0.)); +#274438 = DIRECTION('',(1.169685109338E-02,0.999931589497,0.)); +#274439 = ADVANCED_FACE('',(#274440),#274465,.T.); +#274440 = FACE_BOUND('',#274441,.T.); +#274441 = EDGE_LOOP('',(#274442,#274443,#274451,#274459)); +#274442 = ORIENTED_EDGE('',*,*,#274421,.T.); +#274443 = ORIENTED_EDGE('',*,*,#274444,.T.); +#274444 = EDGE_CURVE('',#274414,#274445,#274447,.T.); +#274445 = VERTEX_POINT('',#274446); +#274446 = CARTESIAN_POINT('',(140.932353,-127.678943,1.545)); +#274447 = LINE('',#274448,#274449); +#274448 = CARTESIAN_POINT('',(140.917421,-127.714991,1.545)); +#274449 = VECTOR('',#274450,1.); +#274450 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#274451 = ORIENTED_EDGE('',*,*,#274452,.F.); +#274452 = EDGE_CURVE('',#274453,#274445,#274455,.T.); +#274453 = VERTEX_POINT('',#274454); +#274454 = CARTESIAN_POINT('',(140.932353,-127.678943,1.51)); +#274455 = LINE('',#274456,#274457); +#274456 = CARTESIAN_POINT('',(140.932353,-127.678943,1.51)); +#274457 = VECTOR('',#274458,1.); +#274458 = DIRECTION('',(0.,0.,1.)); +#274459 = ORIENTED_EDGE('',*,*,#274460,.F.); +#274460 = EDGE_CURVE('',#274422,#274453,#274461,.T.); +#274461 = LINE('',#274462,#274463); +#274462 = CARTESIAN_POINT('',(140.917421,-127.714991,1.51)); +#274463 = VECTOR('',#274464,1.); +#274464 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#274465 = PLANE('',#274466); +#274466 = AXIS2_PLACEMENT_3D('',#274467,#274468,#274469); +#274467 = CARTESIAN_POINT('',(140.917421,-127.714991,1.51)); +#274468 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#274469 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#274470 = ADVANCED_FACE('',(#274471),#274487,.T.); +#274471 = FACE_BOUND('',#274472,.T.); +#274472 = EDGE_LOOP('',(#274473,#274474,#274480,#274481)); +#274473 = ORIENTED_EDGE('',*,*,#274452,.T.); +#274474 = ORIENTED_EDGE('',*,*,#274475,.T.); +#274475 = EDGE_CURVE('',#274445,#273813,#274476,.T.); +#274476 = LINE('',#274477,#274478); +#274477 = CARTESIAN_POINT('',(140.932353,-127.678943,1.545)); +#274478 = VECTOR('',#274479,1.); +#274479 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274480 = ORIENTED_EDGE('',*,*,#273810,.F.); +#274481 = ORIENTED_EDGE('',*,*,#274482,.F.); +#274482 = EDGE_CURVE('',#274453,#273811,#274483,.T.); +#274483 = LINE('',#274484,#274485); +#274484 = CARTESIAN_POINT('',(140.932353,-127.678943,1.51)); +#274485 = VECTOR('',#274486,1.); +#274486 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274487 = PLANE('',#274488); +#274488 = AXIS2_PLACEMENT_3D('',#274489,#274490,#274491); +#274489 = CARTESIAN_POINT('',(140.932353,-127.678943,1.51)); +#274490 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#274491 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#274492 = ADVANCED_FACE('',(#274493),#274517,.F.); +#274493 = FACE_BOUND('',#274494,.T.); +#274494 = EDGE_LOOP('',(#274495,#274496,#274497,#274498,#274499,#274500, + #274501,#274502,#274503,#274504,#274505,#274506,#274507,#274508, + #274509,#274510,#274511,#274512,#274513,#274514,#274515,#274516)); +#274495 = ORIENTED_EDGE('',*,*,#273836,.T.); +#274496 = ORIENTED_EDGE('',*,*,#273867,.T.); +#274497 = ORIENTED_EDGE('',*,*,#273899,.T.); +#274498 = ORIENTED_EDGE('',*,*,#273931,.T.); +#274499 = ORIENTED_EDGE('',*,*,#273962,.T.); +#274500 = ORIENTED_EDGE('',*,*,#273993,.T.); +#274501 = ORIENTED_EDGE('',*,*,#274024,.T.); +#274502 = ORIENTED_EDGE('',*,*,#274055,.T.); +#274503 = ORIENTED_EDGE('',*,*,#274086,.T.); +#274504 = ORIENTED_EDGE('',*,*,#274117,.T.); +#274505 = ORIENTED_EDGE('',*,*,#274148,.T.); +#274506 = ORIENTED_EDGE('',*,*,#274179,.T.); +#274507 = ORIENTED_EDGE('',*,*,#274210,.T.); +#274508 = ORIENTED_EDGE('',*,*,#274242,.T.); +#274509 = ORIENTED_EDGE('',*,*,#274274,.T.); +#274510 = ORIENTED_EDGE('',*,*,#274305,.T.); +#274511 = ORIENTED_EDGE('',*,*,#274336,.T.); +#274512 = ORIENTED_EDGE('',*,*,#274367,.T.); +#274513 = ORIENTED_EDGE('',*,*,#274398,.T.); +#274514 = ORIENTED_EDGE('',*,*,#274429,.T.); +#274515 = ORIENTED_EDGE('',*,*,#274460,.T.); +#274516 = ORIENTED_EDGE('',*,*,#274482,.T.); +#274517 = PLANE('',#274518); +#274518 = AXIS2_PLACEMENT_3D('',#274519,#274520,#274521); +#274519 = CARTESIAN_POINT('',(0.,0.,1.51)); +#274520 = DIRECTION('',(0.,0.,1.)); +#274521 = DIRECTION('',(1.,0.,-0.)); +#274522 = ADVANCED_FACE('',(#274523),#274547,.T.); +#274523 = FACE_BOUND('',#274524,.F.); +#274524 = EDGE_LOOP('',(#274525,#274526,#274527,#274528,#274529,#274530, + #274531,#274532,#274533,#274534,#274535,#274536,#274537,#274538, + #274539,#274540,#274541,#274542,#274543,#274544,#274545,#274546)); +#274525 = ORIENTED_EDGE('',*,*,#273820,.T.); +#274526 = ORIENTED_EDGE('',*,*,#273851,.T.); +#274527 = ORIENTED_EDGE('',*,*,#273882,.T.); +#274528 = ORIENTED_EDGE('',*,*,#273915,.T.); +#274529 = ORIENTED_EDGE('',*,*,#273946,.T.); +#274530 = ORIENTED_EDGE('',*,*,#273977,.T.); +#274531 = ORIENTED_EDGE('',*,*,#274008,.T.); +#274532 = ORIENTED_EDGE('',*,*,#274039,.T.); +#274533 = ORIENTED_EDGE('',*,*,#274070,.T.); +#274534 = ORIENTED_EDGE('',*,*,#274101,.T.); +#274535 = ORIENTED_EDGE('',*,*,#274132,.T.); +#274536 = ORIENTED_EDGE('',*,*,#274163,.T.); +#274537 = ORIENTED_EDGE('',*,*,#274194,.T.); +#274538 = ORIENTED_EDGE('',*,*,#274225,.T.); +#274539 = ORIENTED_EDGE('',*,*,#274258,.T.); +#274540 = ORIENTED_EDGE('',*,*,#274289,.T.); +#274541 = ORIENTED_EDGE('',*,*,#274320,.T.); +#274542 = ORIENTED_EDGE('',*,*,#274351,.T.); +#274543 = ORIENTED_EDGE('',*,*,#274382,.T.); +#274544 = ORIENTED_EDGE('',*,*,#274413,.T.); +#274545 = ORIENTED_EDGE('',*,*,#274444,.T.); +#274546 = ORIENTED_EDGE('',*,*,#274475,.T.); +#274547 = PLANE('',#274548); +#274548 = AXIS2_PLACEMENT_3D('',#274549,#274550,#274551); +#274549 = CARTESIAN_POINT('',(0.,0.,1.545)); +#274550 = DIRECTION('',(0.,0.,1.)); +#274551 = DIRECTION('',(1.,0.,-0.)); +#274552 = MANIFOLD_SOLID_BREP('',#274553); +#274553 = CLOSED_SHELL('',(#274554,#274594,#274625,#274656,#274687, + #274720,#274751,#274782,#274813,#274844,#274877,#274908,#274939, + #274970,#274992,#275014)); +#274554 = ADVANCED_FACE('',(#274555),#274589,.T.); +#274555 = FACE_BOUND('',#274556,.T.); +#274556 = EDGE_LOOP('',(#274557,#274567,#274575,#274583)); +#274557 = ORIENTED_EDGE('',*,*,#274558,.T.); +#274558 = EDGE_CURVE('',#274559,#274561,#274563,.T.); +#274559 = VERTEX_POINT('',#274560); +#274560 = CARTESIAN_POINT('',(142.,-127.947473,1.51)); +#274561 = VERTEX_POINT('',#274562); +#274562 = CARTESIAN_POINT('',(142.,-127.947473,1.545)); +#274563 = LINE('',#274564,#274565); +#274564 = CARTESIAN_POINT('',(142.,-127.947473,1.51)); +#274565 = VECTOR('',#274566,1.); +#274566 = DIRECTION('',(0.,0.,1.)); +#274567 = ORIENTED_EDGE('',*,*,#274568,.T.); +#274568 = EDGE_CURVE('',#274561,#274569,#274571,.T.); +#274569 = VERTEX_POINT('',#274570); +#274570 = CARTESIAN_POINT('',(142.057995,-127.943672,1.545)); +#274571 = LINE('',#274572,#274573); +#274572 = CARTESIAN_POINT('',(142.,-127.947473,1.545)); +#274573 = VECTOR('',#274574,1.); +#274574 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#274575 = ORIENTED_EDGE('',*,*,#274576,.F.); +#274576 = EDGE_CURVE('',#274577,#274569,#274579,.T.); +#274577 = VERTEX_POINT('',#274578); +#274578 = CARTESIAN_POINT('',(142.057995,-127.943672,1.51)); +#274579 = LINE('',#274580,#274581); +#274580 = CARTESIAN_POINT('',(142.057995,-127.943672,1.51)); +#274581 = VECTOR('',#274582,1.); +#274582 = DIRECTION('',(0.,0.,1.)); +#274583 = ORIENTED_EDGE('',*,*,#274584,.F.); +#274584 = EDGE_CURVE('',#274559,#274577,#274585,.T.); +#274585 = LINE('',#274586,#274587); +#274586 = CARTESIAN_POINT('',(142.,-127.947473,1.51)); +#274587 = VECTOR('',#274588,1.); +#274588 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#274589 = PLANE('',#274590); +#274590 = AXIS2_PLACEMENT_3D('',#274591,#274592,#274593); +#274591 = CARTESIAN_POINT('',(142.,-127.947473,1.51)); +#274592 = DIRECTION('',(-6.53998205277E-02,0.997859140097,0.)); +#274593 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#274594 = ADVANCED_FACE('',(#274595),#274620,.T.); +#274595 = FACE_BOUND('',#274596,.T.); +#274596 = EDGE_LOOP('',(#274597,#274598,#274606,#274614)); +#274597 = ORIENTED_EDGE('',*,*,#274576,.T.); +#274598 = ORIENTED_EDGE('',*,*,#274599,.T.); +#274599 = EDGE_CURVE('',#274569,#274600,#274602,.T.); +#274600 = VERTEX_POINT('',#274601); +#274601 = CARTESIAN_POINT('',(142.1,-127.932416,1.545)); +#274602 = LINE('',#274603,#274604); +#274603 = CARTESIAN_POINT('',(142.057995,-127.943672,1.545)); +#274604 = VECTOR('',#274605,1.); +#274605 = DIRECTION('',(0.965921260566,0.258836084012,0.)); +#274606 = ORIENTED_EDGE('',*,*,#274607,.F.); +#274607 = EDGE_CURVE('',#274608,#274600,#274610,.T.); +#274608 = VERTEX_POINT('',#274609); +#274609 = CARTESIAN_POINT('',(142.1,-127.932416,1.51)); +#274610 = LINE('',#274611,#274612); +#274611 = CARTESIAN_POINT('',(142.1,-127.932416,1.51)); +#274612 = VECTOR('',#274613,1.); +#274613 = DIRECTION('',(0.,0.,1.)); +#274614 = ORIENTED_EDGE('',*,*,#274615,.F.); +#274615 = EDGE_CURVE('',#274577,#274608,#274616,.T.); +#274616 = LINE('',#274617,#274618); +#274617 = CARTESIAN_POINT('',(142.057995,-127.943672,1.51)); +#274618 = VECTOR('',#274619,1.); +#274619 = DIRECTION('',(0.965921260566,0.258836084012,0.)); +#274620 = PLANE('',#274621); +#274621 = AXIS2_PLACEMENT_3D('',#274622,#274623,#274624); +#274622 = CARTESIAN_POINT('',(142.057995,-127.943672,1.51)); +#274623 = DIRECTION('',(-0.258836084012,0.965921260566,0.)); +#274624 = DIRECTION('',(0.965921260566,0.258836084012,0.)); +#274625 = ADVANCED_FACE('',(#274626),#274651,.T.); +#274626 = FACE_BOUND('',#274627,.T.); +#274627 = EDGE_LOOP('',(#274628,#274629,#274637,#274645)); +#274628 = ORIENTED_EDGE('',*,*,#274607,.T.); +#274629 = ORIENTED_EDGE('',*,*,#274630,.T.); +#274630 = EDGE_CURVE('',#274600,#274631,#274633,.T.); +#274631 = VERTEX_POINT('',#274632); +#274632 = CARTESIAN_POINT('',(142.1,-128.728578,1.545)); +#274633 = LINE('',#274634,#274635); +#274634 = CARTESIAN_POINT('',(142.1,-127.932416,1.545)); +#274635 = VECTOR('',#274636,1.); +#274636 = DIRECTION('',(0.,-1.,0.)); +#274637 = ORIENTED_EDGE('',*,*,#274638,.F.); +#274638 = EDGE_CURVE('',#274639,#274631,#274641,.T.); +#274639 = VERTEX_POINT('',#274640); +#274640 = CARTESIAN_POINT('',(142.1,-128.728578,1.51)); +#274641 = LINE('',#274642,#274643); +#274642 = CARTESIAN_POINT('',(142.1,-128.728578,1.51)); +#274643 = VECTOR('',#274644,1.); +#274644 = DIRECTION('',(0.,0.,1.)); +#274645 = ORIENTED_EDGE('',*,*,#274646,.F.); +#274646 = EDGE_CURVE('',#274608,#274639,#274647,.T.); +#274647 = LINE('',#274648,#274649); +#274648 = CARTESIAN_POINT('',(142.1,-127.932416,1.51)); +#274649 = VECTOR('',#274650,1.); +#274650 = DIRECTION('',(0.,-1.,0.)); +#274651 = PLANE('',#274652); +#274652 = AXIS2_PLACEMENT_3D('',#274653,#274654,#274655); +#274653 = CARTESIAN_POINT('',(142.1,-127.932416,1.51)); +#274654 = DIRECTION('',(1.,0.,-0.)); +#274655 = DIRECTION('',(0.,-1.,0.)); +#274656 = ADVANCED_FACE('',(#274657),#274682,.T.); +#274657 = FACE_BOUND('',#274658,.T.); +#274658 = EDGE_LOOP('',(#274659,#274660,#274668,#274676)); +#274659 = ORIENTED_EDGE('',*,*,#274638,.T.); +#274660 = ORIENTED_EDGE('',*,*,#274661,.T.); +#274661 = EDGE_CURVE('',#274631,#274662,#274664,.T.); +#274662 = VERTEX_POINT('',#274663); +#274663 = CARTESIAN_POINT('',(142.333147,-128.964442,1.545)); +#274664 = LINE('',#274665,#274666); +#274665 = CARTESIAN_POINT('',(142.1,-128.728578,1.545)); +#274666 = VECTOR('',#274667,1.); +#274667 = DIRECTION('',(0.702998686558,-0.711191146386,0.)); +#274668 = ORIENTED_EDGE('',*,*,#274669,.F.); +#274669 = EDGE_CURVE('',#274670,#274662,#274672,.T.); +#274670 = VERTEX_POINT('',#274671); +#274671 = CARTESIAN_POINT('',(142.333147,-128.964442,1.51)); +#274672 = LINE('',#274673,#274674); +#274673 = CARTESIAN_POINT('',(142.333147,-128.964442,1.51)); +#274674 = VECTOR('',#274675,1.); +#274675 = DIRECTION('',(0.,0.,1.)); +#274676 = ORIENTED_EDGE('',*,*,#274677,.F.); +#274677 = EDGE_CURVE('',#274639,#274670,#274678,.T.); +#274678 = LINE('',#274679,#274680); +#274679 = CARTESIAN_POINT('',(142.1,-128.728578,1.51)); +#274680 = VECTOR('',#274681,1.); +#274681 = DIRECTION('',(0.702998686558,-0.711191146386,0.)); +#274682 = PLANE('',#274683); +#274683 = AXIS2_PLACEMENT_3D('',#274684,#274685,#274686); +#274684 = CARTESIAN_POINT('',(142.1,-128.728578,1.51)); +#274685 = DIRECTION('',(0.711191146386,0.702998686558,-0.)); +#274686 = DIRECTION('',(0.702998686558,-0.711191146386,0.)); +#274687 = ADVANCED_FACE('',(#274688),#274715,.T.); +#274688 = FACE_BOUND('',#274689,.T.); +#274689 = EDGE_LOOP('',(#274690,#274691,#274700,#274708)); +#274690 = ORIENTED_EDGE('',*,*,#274669,.T.); +#274691 = ORIENTED_EDGE('',*,*,#274692,.T.); +#274692 = EDGE_CURVE('',#274662,#274693,#274695,.T.); +#274693 = VERTEX_POINT('',#274694); +#274694 = CARTESIAN_POINT('',(142.194442,-129.103147,1.545)); +#274695 = CIRCLE('',#274696,0.10000071281); +#274696 = AXIS2_PLACEMENT_3D('',#274697,#274698,#274699); +#274697 = CARTESIAN_POINT('',(142.2499995,-129.0199995,1.545)); +#274698 = DIRECTION('',(0.,0.,-1.)); +#274699 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#274700 = ORIENTED_EDGE('',*,*,#274701,.F.); +#274701 = EDGE_CURVE('',#274702,#274693,#274704,.T.); +#274702 = VERTEX_POINT('',#274703); +#274703 = CARTESIAN_POINT('',(142.194442,-129.103147,1.51)); +#274704 = LINE('',#274705,#274706); +#274705 = CARTESIAN_POINT('',(142.194442,-129.103147,1.51)); +#274706 = VECTOR('',#274707,1.); +#274707 = DIRECTION('',(0.,0.,1.)); +#274708 = ORIENTED_EDGE('',*,*,#274709,.F.); +#274709 = EDGE_CURVE('',#274670,#274702,#274710,.T.); +#274710 = CIRCLE('',#274711,0.10000071281); +#274711 = AXIS2_PLACEMENT_3D('',#274712,#274713,#274714); +#274712 = CARTESIAN_POINT('',(142.2499995,-129.0199995,1.51)); +#274713 = DIRECTION('',(0.,0.,-1.)); +#274714 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#274715 = CYLINDRICAL_SURFACE('',#274716,0.10000071281); +#274716 = AXIS2_PLACEMENT_3D('',#274717,#274718,#274719); +#274717 = CARTESIAN_POINT('',(142.2499995,-129.0199995,1.51)); +#274718 = DIRECTION('',(0.,0.,-1.)); +#274719 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#274720 = ADVANCED_FACE('',(#274721),#274746,.T.); +#274721 = FACE_BOUND('',#274722,.T.); +#274722 = EDGE_LOOP('',(#274723,#274724,#274732,#274740)); +#274723 = ORIENTED_EDGE('',*,*,#274701,.T.); +#274724 = ORIENTED_EDGE('',*,*,#274725,.T.); +#274725 = EDGE_CURVE('',#274693,#274726,#274728,.T.); +#274726 = VERTEX_POINT('',#274727); +#274727 = CARTESIAN_POINT('',(141.916853,-128.825557,1.545)); +#274728 = LINE('',#274729,#274730); +#274729 = CARTESIAN_POINT('',(142.194442,-129.103147,1.545)); +#274730 = VECTOR('',#274731,1.); +#274731 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#274732 = ORIENTED_EDGE('',*,*,#274733,.F.); +#274733 = EDGE_CURVE('',#274734,#274726,#274736,.T.); +#274734 = VERTEX_POINT('',#274735); +#274735 = CARTESIAN_POINT('',(141.916853,-128.825557,1.51)); +#274736 = LINE('',#274737,#274738); +#274737 = CARTESIAN_POINT('',(141.916853,-128.825557,1.51)); +#274738 = VECTOR('',#274739,1.); +#274739 = DIRECTION('',(0.,0.,1.)); +#274740 = ORIENTED_EDGE('',*,*,#274741,.F.); +#274741 = EDGE_CURVE('',#274702,#274734,#274742,.T.); +#274742 = LINE('',#274743,#274744); +#274743 = CARTESIAN_POINT('',(142.194442,-129.103147,1.51)); +#274744 = VECTOR('',#274745,1.); +#274745 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#274746 = PLANE('',#274747); +#274747 = AXIS2_PLACEMENT_3D('',#274748,#274749,#274750); +#274748 = CARTESIAN_POINT('',(142.194442,-129.103147,1.51)); +#274749 = DIRECTION('',(-0.707108054841,-0.70710550753,0.)); +#274750 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#274751 = ADVANCED_FACE('',(#274752),#274777,.T.); +#274752 = FACE_BOUND('',#274753,.T.); +#274753 = EDGE_LOOP('',(#274754,#274755,#274763,#274771)); +#274754 = ORIENTED_EDGE('',*,*,#274733,.T.); +#274755 = ORIENTED_EDGE('',*,*,#274756,.T.); +#274756 = EDGE_CURVE('',#274726,#274757,#274759,.T.); +#274757 = VERTEX_POINT('',#274758); +#274758 = CARTESIAN_POINT('',(141.901921,-128.789509,1.545)); +#274759 = LINE('',#274760,#274761); +#274760 = CARTESIAN_POINT('',(141.916853,-128.825557,1.545)); +#274761 = VECTOR('',#274762,1.); +#274762 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#274763 = ORIENTED_EDGE('',*,*,#274764,.F.); +#274764 = EDGE_CURVE('',#274765,#274757,#274767,.T.); +#274765 = VERTEX_POINT('',#274766); +#274766 = CARTESIAN_POINT('',(141.901921,-128.789509,1.51)); +#274767 = LINE('',#274768,#274769); +#274768 = CARTESIAN_POINT('',(141.901921,-128.789509,1.51)); +#274769 = VECTOR('',#274770,1.); +#274770 = DIRECTION('',(0.,0.,1.)); +#274771 = ORIENTED_EDGE('',*,*,#274772,.F.); +#274772 = EDGE_CURVE('',#274734,#274765,#274773,.T.); +#274773 = LINE('',#274774,#274775); +#274774 = CARTESIAN_POINT('',(141.916853,-128.825557,1.51)); +#274775 = VECTOR('',#274776,1.); +#274776 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#274777 = PLANE('',#274778); +#274778 = AXIS2_PLACEMENT_3D('',#274779,#274780,#274781); +#274779 = CARTESIAN_POINT('',(141.916853,-128.825557,1.51)); +#274780 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#274781 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#274782 = ADVANCED_FACE('',(#274783),#274808,.T.); +#274783 = FACE_BOUND('',#274784,.T.); +#274784 = EDGE_LOOP('',(#274785,#274786,#274794,#274802)); +#274785 = ORIENTED_EDGE('',*,*,#274764,.T.); +#274786 = ORIENTED_EDGE('',*,*,#274787,.T.); +#274787 = EDGE_CURVE('',#274757,#274788,#274790,.T.); +#274788 = VERTEX_POINT('',#274789); +#274789 = CARTESIAN_POINT('',(141.9,-128.261421,1.545)); +#274790 = LINE('',#274791,#274792); +#274791 = CARTESIAN_POINT('',(141.901921,-128.789509,1.545)); +#274792 = VECTOR('',#274793,1.); +#274793 = DIRECTION('',(-3.637627233122E-03,0.999993383812,0.)); +#274794 = ORIENTED_EDGE('',*,*,#274795,.F.); +#274795 = EDGE_CURVE('',#274796,#274788,#274798,.T.); +#274796 = VERTEX_POINT('',#274797); +#274797 = CARTESIAN_POINT('',(141.9,-128.261421,1.51)); +#274798 = LINE('',#274799,#274800); +#274799 = CARTESIAN_POINT('',(141.9,-128.261421,1.51)); +#274800 = VECTOR('',#274801,1.); +#274801 = DIRECTION('',(0.,0.,1.)); +#274802 = ORIENTED_EDGE('',*,*,#274803,.F.); +#274803 = EDGE_CURVE('',#274765,#274796,#274804,.T.); +#274804 = LINE('',#274805,#274806); +#274805 = CARTESIAN_POINT('',(141.901921,-128.789509,1.51)); +#274806 = VECTOR('',#274807,1.); +#274807 = DIRECTION('',(-3.637627233122E-03,0.999993383812,0.)); +#274808 = PLANE('',#274809); +#274809 = AXIS2_PLACEMENT_3D('',#274810,#274811,#274812); +#274810 = CARTESIAN_POINT('',(141.901921,-128.789509,1.51)); +#274811 = DIRECTION('',(-0.999993383812,-3.637627233122E-03,0.)); +#274812 = DIRECTION('',(-3.637627233122E-03,0.999993383812,0.)); +#274813 = ADVANCED_FACE('',(#274814),#274839,.T.); +#274814 = FACE_BOUND('',#274815,.T.); +#274815 = EDGE_LOOP('',(#274816,#274817,#274825,#274833)); +#274816 = ORIENTED_EDGE('',*,*,#274795,.T.); +#274817 = ORIENTED_EDGE('',*,*,#274818,.T.); +#274818 = EDGE_CURVE('',#274788,#274819,#274821,.T.); +#274819 = VERTEX_POINT('',#274820); +#274820 = CARTESIAN_POINT('',(141.055557,-129.103147,1.545)); +#274821 = LINE('',#274822,#274823); +#274822 = CARTESIAN_POINT('',(141.9,-128.261421,1.545)); +#274823 = VECTOR('',#274824,1.); +#274824 = DIRECTION('',(-0.708245254713,-0.705966471708,0.)); +#274825 = ORIENTED_EDGE('',*,*,#274826,.F.); +#274826 = EDGE_CURVE('',#274827,#274819,#274829,.T.); +#274827 = VERTEX_POINT('',#274828); +#274828 = CARTESIAN_POINT('',(141.055557,-129.103147,1.51)); +#274829 = LINE('',#274830,#274831); +#274830 = CARTESIAN_POINT('',(141.055557,-129.103147,1.51)); +#274831 = VECTOR('',#274832,1.); +#274832 = DIRECTION('',(0.,0.,1.)); +#274833 = ORIENTED_EDGE('',*,*,#274834,.F.); +#274834 = EDGE_CURVE('',#274796,#274827,#274835,.T.); +#274835 = LINE('',#274836,#274837); +#274836 = CARTESIAN_POINT('',(141.9,-128.261421,1.51)); +#274837 = VECTOR('',#274838,1.); +#274838 = DIRECTION('',(-0.708245254713,-0.705966471708,0.)); +#274839 = PLANE('',#274840); +#274840 = AXIS2_PLACEMENT_3D('',#274841,#274842,#274843); +#274841 = CARTESIAN_POINT('',(141.9,-128.261421,1.51)); +#274842 = DIRECTION('',(0.705966471708,-0.708245254713,0.)); +#274843 = DIRECTION('',(-0.708245254713,-0.705966471708,0.)); +#274844 = ADVANCED_FACE('',(#274845),#274872,.T.); +#274845 = FACE_BOUND('',#274846,.T.); +#274846 = EDGE_LOOP('',(#274847,#274848,#274857,#274865)); +#274847 = ORIENTED_EDGE('',*,*,#274826,.T.); +#274848 = ORIENTED_EDGE('',*,*,#274849,.T.); +#274849 = EDGE_CURVE('',#274819,#274850,#274852,.T.); +#274850 = VERTEX_POINT('',#274851); +#274851 = CARTESIAN_POINT('',(140.916853,-128.964443,1.545)); +#274852 = CIRCLE('',#274853,0.10000001929); +#274853 = AXIS2_PLACEMENT_3D('',#274854,#274855,#274856); +#274854 = CARTESIAN_POINT('',(141.,-129.02,1.545)); +#274855 = DIRECTION('',(0.,0.,-1.)); +#274856 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#274857 = ORIENTED_EDGE('',*,*,#274858,.F.); +#274858 = EDGE_CURVE('',#274859,#274850,#274861,.T.); +#274859 = VERTEX_POINT('',#274860); +#274860 = CARTESIAN_POINT('',(140.916853,-128.964443,1.51)); +#274861 = LINE('',#274862,#274863); +#274862 = CARTESIAN_POINT('',(140.916853,-128.964443,1.51)); +#274863 = VECTOR('',#274864,1.); +#274864 = DIRECTION('',(0.,0.,1.)); +#274865 = ORIENTED_EDGE('',*,*,#274866,.F.); +#274866 = EDGE_CURVE('',#274827,#274859,#274867,.T.); +#274867 = CIRCLE('',#274868,0.10000001929); +#274868 = AXIS2_PLACEMENT_3D('',#274869,#274870,#274871); +#274869 = CARTESIAN_POINT('',(141.,-129.02,1.51)); +#274870 = DIRECTION('',(0.,0.,-1.)); +#274871 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#274872 = CYLINDRICAL_SURFACE('',#274873,0.10000001929); +#274873 = AXIS2_PLACEMENT_3D('',#274874,#274875,#274876); +#274874 = CARTESIAN_POINT('',(141.,-129.02,1.51)); +#274875 = DIRECTION('',(0.,0.,-1.)); +#274876 = DIRECTION('',(0.555569892831,-0.83146983961,0.)); +#274877 = ADVANCED_FACE('',(#274878),#274903,.T.); +#274878 = FACE_BOUND('',#274879,.T.); +#274879 = EDGE_LOOP('',(#274880,#274881,#274889,#274897)); +#274880 = ORIENTED_EDGE('',*,*,#274858,.T.); +#274881 = ORIENTED_EDGE('',*,*,#274882,.T.); +#274882 = EDGE_CURVE('',#274850,#274883,#274885,.T.); +#274883 = VERTEX_POINT('',#274884); +#274884 = CARTESIAN_POINT('',(141.9,-127.978578,1.545)); +#274885 = LINE('',#274886,#274887); +#274886 = CARTESIAN_POINT('',(140.916853,-128.964443,1.545)); +#274887 = VECTOR('',#274888,1.); +#274888 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#274889 = ORIENTED_EDGE('',*,*,#274890,.F.); +#274890 = EDGE_CURVE('',#274891,#274883,#274893,.T.); +#274891 = VERTEX_POINT('',#274892); +#274892 = CARTESIAN_POINT('',(141.9,-127.978578,1.51)); +#274893 = LINE('',#274894,#274895); +#274894 = CARTESIAN_POINT('',(141.9,-127.978578,1.51)); +#274895 = VECTOR('',#274896,1.); +#274896 = DIRECTION('',(0.,0.,1.)); +#274897 = ORIENTED_EDGE('',*,*,#274898,.F.); +#274898 = EDGE_CURVE('',#274859,#274891,#274899,.T.); +#274899 = LINE('',#274900,#274901); +#274900 = CARTESIAN_POINT('',(140.916853,-128.964443,1.51)); +#274901 = VECTOR('',#274902,1.); +#274902 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#274903 = PLANE('',#274904); +#274904 = AXIS2_PLACEMENT_3D('',#274905,#274906,#274907); +#274905 = CARTESIAN_POINT('',(140.916853,-128.964443,1.51)); +#274906 = DIRECTION('',(-0.708082188095,0.706130026909,0.)); +#274907 = DIRECTION('',(0.706130026909,0.708082188095,0.)); +#274908 = ADVANCED_FACE('',(#274909),#274934,.T.); +#274909 = FACE_BOUND('',#274910,.T.); +#274910 = EDGE_LOOP('',(#274911,#274912,#274920,#274928)); +#274911 = ORIENTED_EDGE('',*,*,#274890,.T.); +#274912 = ORIENTED_EDGE('',*,*,#274913,.T.); +#274913 = EDGE_CURVE('',#274883,#274914,#274916,.T.); +#274914 = VERTEX_POINT('',#274915); +#274915 = CARTESIAN_POINT('',(141.9,-127.932416,1.545)); +#274916 = LINE('',#274917,#274918); +#274917 = CARTESIAN_POINT('',(141.9,-127.978578,1.545)); +#274918 = VECTOR('',#274919,1.); +#274919 = DIRECTION('',(0.,1.,0.)); +#274920 = ORIENTED_EDGE('',*,*,#274921,.F.); +#274921 = EDGE_CURVE('',#274922,#274914,#274924,.T.); +#274922 = VERTEX_POINT('',#274923); +#274923 = CARTESIAN_POINT('',(141.9,-127.932416,1.51)); +#274924 = LINE('',#274925,#274926); +#274925 = CARTESIAN_POINT('',(141.9,-127.932416,1.51)); +#274926 = VECTOR('',#274927,1.); +#274927 = DIRECTION('',(0.,0.,1.)); +#274928 = ORIENTED_EDGE('',*,*,#274929,.F.); +#274929 = EDGE_CURVE('',#274891,#274922,#274930,.T.); +#274930 = LINE('',#274931,#274932); +#274931 = CARTESIAN_POINT('',(141.9,-127.978578,1.51)); +#274932 = VECTOR('',#274933,1.); +#274933 = DIRECTION('',(0.,1.,0.)); +#274934 = PLANE('',#274935); +#274935 = AXIS2_PLACEMENT_3D('',#274936,#274937,#274938); +#274936 = CARTESIAN_POINT('',(141.9,-127.978578,1.51)); +#274937 = DIRECTION('',(-1.,0.,0.)); +#274938 = DIRECTION('',(0.,1.,0.)); +#274939 = ADVANCED_FACE('',(#274940),#274965,.T.); +#274940 = FACE_BOUND('',#274941,.T.); +#274941 = EDGE_LOOP('',(#274942,#274943,#274951,#274959)); +#274942 = ORIENTED_EDGE('',*,*,#274921,.T.); +#274943 = ORIENTED_EDGE('',*,*,#274944,.T.); +#274944 = EDGE_CURVE('',#274914,#274945,#274947,.T.); +#274945 = VERTEX_POINT('',#274946); +#274946 = CARTESIAN_POINT('',(141.942004,-127.943672,1.545)); +#274947 = LINE('',#274948,#274949); +#274948 = CARTESIAN_POINT('',(141.9,-127.932416,1.545)); +#274949 = VECTOR('',#274950,1.); +#274950 = DIRECTION('',(0.965919719913,-0.258841833334,0.)); +#274951 = ORIENTED_EDGE('',*,*,#274952,.F.); +#274952 = EDGE_CURVE('',#274953,#274945,#274955,.T.); +#274953 = VERTEX_POINT('',#274954); +#274954 = CARTESIAN_POINT('',(141.942004,-127.943672,1.51)); +#274955 = LINE('',#274956,#274957); +#274956 = CARTESIAN_POINT('',(141.942004,-127.943672,1.51)); +#274957 = VECTOR('',#274958,1.); +#274958 = DIRECTION('',(0.,0.,1.)); +#274959 = ORIENTED_EDGE('',*,*,#274960,.F.); +#274960 = EDGE_CURVE('',#274922,#274953,#274961,.T.); +#274961 = LINE('',#274962,#274963); +#274962 = CARTESIAN_POINT('',(141.9,-127.932416,1.51)); +#274963 = VECTOR('',#274964,1.); +#274964 = DIRECTION('',(0.965919719913,-0.258841833334,0.)); +#274965 = PLANE('',#274966); +#274966 = AXIS2_PLACEMENT_3D('',#274967,#274968,#274969); +#274967 = CARTESIAN_POINT('',(141.9,-127.932416,1.51)); +#274968 = DIRECTION('',(0.258841833334,0.965919719913,-0.)); +#274969 = DIRECTION('',(0.965919719913,-0.258841833334,0.)); +#274970 = ADVANCED_FACE('',(#274971),#274987,.T.); +#274971 = FACE_BOUND('',#274972,.T.); +#274972 = EDGE_LOOP('',(#274973,#274974,#274980,#274981)); +#274973 = ORIENTED_EDGE('',*,*,#274952,.T.); +#274974 = ORIENTED_EDGE('',*,*,#274975,.T.); +#274975 = EDGE_CURVE('',#274945,#274561,#274976,.T.); +#274976 = LINE('',#274977,#274978); +#274977 = CARTESIAN_POINT('',(141.942004,-127.943672,1.545)); +#274978 = VECTOR('',#274979,1.); +#274979 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#274980 = ORIENTED_EDGE('',*,*,#274558,.F.); +#274981 = ORIENTED_EDGE('',*,*,#274982,.F.); +#274982 = EDGE_CURVE('',#274953,#274559,#274983,.T.); +#274983 = LINE('',#274984,#274985); +#274984 = CARTESIAN_POINT('',(141.942004,-127.943672,1.51)); +#274985 = VECTOR('',#274986,1.); +#274986 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#274987 = PLANE('',#274988); +#274988 = AXIS2_PLACEMENT_3D('',#274989,#274990,#274991); +#274989 = CARTESIAN_POINT('',(141.942004,-127.943672,1.51)); +#274990 = DIRECTION('',(6.539869768985E-02,0.997859213687,-0.)); +#274991 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#274992 = ADVANCED_FACE('',(#274993),#275009,.F.); +#274993 = FACE_BOUND('',#274994,.T.); +#274994 = EDGE_LOOP('',(#274995,#274996,#274997,#274998,#274999,#275000, + #275001,#275002,#275003,#275004,#275005,#275006,#275007,#275008)); +#274995 = ORIENTED_EDGE('',*,*,#274584,.T.); +#274996 = ORIENTED_EDGE('',*,*,#274615,.T.); +#274997 = ORIENTED_EDGE('',*,*,#274646,.T.); +#274998 = ORIENTED_EDGE('',*,*,#274677,.T.); +#274999 = ORIENTED_EDGE('',*,*,#274709,.T.); +#275000 = ORIENTED_EDGE('',*,*,#274741,.T.); +#275001 = ORIENTED_EDGE('',*,*,#274772,.T.); +#275002 = ORIENTED_EDGE('',*,*,#274803,.T.); +#275003 = ORIENTED_EDGE('',*,*,#274834,.T.); +#275004 = ORIENTED_EDGE('',*,*,#274866,.T.); +#275005 = ORIENTED_EDGE('',*,*,#274898,.T.); +#275006 = ORIENTED_EDGE('',*,*,#274929,.T.); +#275007 = ORIENTED_EDGE('',*,*,#274960,.T.); +#275008 = ORIENTED_EDGE('',*,*,#274982,.T.); +#275009 = PLANE('',#275010); +#275010 = AXIS2_PLACEMENT_3D('',#275011,#275012,#275013); +#275011 = CARTESIAN_POINT('',(0.,0.,1.51)); +#275012 = DIRECTION('',(0.,0.,1.)); +#275013 = DIRECTION('',(1.,0.,-0.)); +#275014 = ADVANCED_FACE('',(#275015),#275031,.T.); +#275015 = FACE_BOUND('',#275016,.F.); +#275016 = EDGE_LOOP('',(#275017,#275018,#275019,#275020,#275021,#275022, + #275023,#275024,#275025,#275026,#275027,#275028,#275029,#275030)); +#275017 = ORIENTED_EDGE('',*,*,#274568,.T.); +#275018 = ORIENTED_EDGE('',*,*,#274599,.T.); +#275019 = ORIENTED_EDGE('',*,*,#274630,.T.); +#275020 = ORIENTED_EDGE('',*,*,#274661,.T.); +#275021 = ORIENTED_EDGE('',*,*,#274692,.T.); +#275022 = ORIENTED_EDGE('',*,*,#274725,.T.); +#275023 = ORIENTED_EDGE('',*,*,#274756,.T.); +#275024 = ORIENTED_EDGE('',*,*,#274787,.T.); +#275025 = ORIENTED_EDGE('',*,*,#274818,.T.); +#275026 = ORIENTED_EDGE('',*,*,#274849,.T.); +#275027 = ORIENTED_EDGE('',*,*,#274882,.T.); +#275028 = ORIENTED_EDGE('',*,*,#274913,.T.); +#275029 = ORIENTED_EDGE('',*,*,#274944,.T.); +#275030 = ORIENTED_EDGE('',*,*,#274975,.T.); +#275031 = PLANE('',#275032); +#275032 = AXIS2_PLACEMENT_3D('',#275033,#275034,#275035); +#275033 = CARTESIAN_POINT('',(0.,0.,1.545)); +#275034 = DIRECTION('',(0.,0.,1.)); +#275035 = DIRECTION('',(1.,0.,-0.)); +#275036 = MANIFOLD_SOLID_BREP('',#275037); +#275037 = CLOSED_SHELL('',(#275038,#275071,#275104,#275116)); +#275038 = ADVANCED_FACE('',(#275039),#275066,.T.); +#275039 = FACE_BOUND('',#275040,.F.); +#275040 = EDGE_LOOP('',(#275041,#275051,#275058,#275059)); +#275041 = ORIENTED_EDGE('',*,*,#275042,.T.); +#275042 = EDGE_CURVE('',#275043,#275045,#275047,.T.); +#275043 = VERTEX_POINT('',#275044); +#275044 = CARTESIAN_POINT('',(139.642332,-122.557668,1.51)); +#275045 = VERTEX_POINT('',#275046); +#275046 = CARTESIAN_POINT('',(139.642332,-122.557668,1.545)); +#275047 = LINE('',#275048,#275049); +#275048 = CARTESIAN_POINT('',(139.642332,-122.557668,1.51)); +#275049 = VECTOR('',#275050,1.); +#275050 = DIRECTION('',(0.,0.,1.)); +#275051 = ORIENTED_EDGE('',*,*,#275052,.T.); +#275052 = EDGE_CURVE('',#275045,#275045,#275053,.T.); +#275053 = CIRCLE('',#275054,0.3); +#275054 = AXIS2_PLACEMENT_3D('',#275055,#275056,#275057); +#275055 = CARTESIAN_POINT('',(139.342332,-122.557668,1.545)); +#275056 = DIRECTION('',(0.,0.,1.)); +#275057 = DIRECTION('',(1.,0.,-0.)); +#275058 = ORIENTED_EDGE('',*,*,#275042,.F.); +#275059 = ORIENTED_EDGE('',*,*,#275060,.F.); +#275060 = EDGE_CURVE('',#275043,#275043,#275061,.T.); +#275061 = CIRCLE('',#275062,0.3); +#275062 = AXIS2_PLACEMENT_3D('',#275063,#275064,#275065); +#275063 = CARTESIAN_POINT('',(139.342332,-122.557668,1.51)); +#275064 = DIRECTION('',(0.,0.,1.)); +#275065 = DIRECTION('',(1.,0.,-0.)); +#275066 = CYLINDRICAL_SURFACE('',#275067,0.3); +#275067 = AXIS2_PLACEMENT_3D('',#275068,#275069,#275070); +#275068 = CARTESIAN_POINT('',(139.342332,-122.557668,1.51)); +#275069 = DIRECTION('',(-0.,-0.,-1.)); +#275070 = DIRECTION('',(1.,0.,-0.)); +#275071 = ADVANCED_FACE('',(#275072),#275099,.F.); +#275072 = FACE_BOUND('',#275073,.T.); +#275073 = EDGE_LOOP('',(#275074,#275084,#275091,#275092)); +#275074 = ORIENTED_EDGE('',*,*,#275075,.T.); +#275075 = EDGE_CURVE('',#275076,#275078,#275080,.T.); +#275076 = VERTEX_POINT('',#275077); +#275077 = CARTESIAN_POINT('',(139.479587,-122.557668,1.51)); +#275078 = VERTEX_POINT('',#275079); +#275079 = CARTESIAN_POINT('',(139.479587,-122.557668,1.545)); +#275080 = LINE('',#275081,#275082); +#275081 = CARTESIAN_POINT('',(139.479587,-122.557668,1.51)); +#275082 = VECTOR('',#275083,1.); +#275083 = DIRECTION('',(0.,0.,1.)); +#275084 = ORIENTED_EDGE('',*,*,#275085,.T.); +#275085 = EDGE_CURVE('',#275078,#275078,#275086,.T.); +#275086 = CIRCLE('',#275087,0.137255); +#275087 = AXIS2_PLACEMENT_3D('',#275088,#275089,#275090); +#275088 = CARTESIAN_POINT('',(139.342332,-122.557668,1.545)); +#275089 = DIRECTION('',(0.,0.,1.)); +#275090 = DIRECTION('',(1.,0.,-0.)); +#275091 = ORIENTED_EDGE('',*,*,#275075,.F.); +#275092 = ORIENTED_EDGE('',*,*,#275093,.F.); +#275093 = EDGE_CURVE('',#275076,#275076,#275094,.T.); +#275094 = CIRCLE('',#275095,0.137255); +#275095 = AXIS2_PLACEMENT_3D('',#275096,#275097,#275098); +#275096 = CARTESIAN_POINT('',(139.342332,-122.557668,1.51)); +#275097 = DIRECTION('',(0.,0.,1.)); +#275098 = DIRECTION('',(1.,0.,-0.)); +#275099 = CYLINDRICAL_SURFACE('',#275100,0.137255); +#275100 = AXIS2_PLACEMENT_3D('',#275101,#275102,#275103); +#275101 = CARTESIAN_POINT('',(139.342332,-122.557668,1.51)); +#275102 = DIRECTION('',(-0.,-0.,-1.)); +#275103 = DIRECTION('',(1.,0.,-0.)); +#275104 = ADVANCED_FACE('',(#275105,#275108),#275111,.F.); +#275105 = FACE_BOUND('',#275106,.F.); +#275106 = EDGE_LOOP('',(#275107)); +#275107 = ORIENTED_EDGE('',*,*,#275060,.T.); +#275108 = FACE_BOUND('',#275109,.T.); +#275109 = EDGE_LOOP('',(#275110)); +#275110 = ORIENTED_EDGE('',*,*,#275093,.T.); +#275111 = PLANE('',#275112); +#275112 = AXIS2_PLACEMENT_3D('',#275113,#275114,#275115); +#275113 = CARTESIAN_POINT('',(0.,0.,1.51)); +#275114 = DIRECTION('',(0.,0.,1.)); +#275115 = DIRECTION('',(1.,0.,-0.)); +#275116 = ADVANCED_FACE('',(#275117,#275120),#275123,.T.); +#275117 = FACE_BOUND('',#275118,.T.); +#275118 = EDGE_LOOP('',(#275119)); +#275119 = ORIENTED_EDGE('',*,*,#275052,.T.); +#275120 = FACE_BOUND('',#275121,.F.); +#275121 = EDGE_LOOP('',(#275122)); +#275122 = ORIENTED_EDGE('',*,*,#275085,.T.); +#275123 = PLANE('',#275124); +#275124 = AXIS2_PLACEMENT_3D('',#275125,#275126,#275127); +#275125 = CARTESIAN_POINT('',(0.,0.,1.545)); +#275126 = DIRECTION('',(0.,0.,1.)); +#275127 = DIRECTION('',(1.,0.,-0.)); +#275128 = MANIFOLD_SOLID_BREP('',#275129); +#275129 = CLOSED_SHELL('',(#275130,#275163,#275196,#275208)); +#275130 = ADVANCED_FACE('',(#275131),#275158,.T.); +#275131 = FACE_BOUND('',#275132,.F.); +#275132 = EDGE_LOOP('',(#275133,#275143,#275150,#275151)); +#275133 = ORIENTED_EDGE('',*,*,#275134,.T.); +#275134 = EDGE_CURVE('',#275135,#275137,#275139,.T.); +#275135 = VERTEX_POINT('',#275136); +#275136 = CARTESIAN_POINT('',(127.41,-120.4,1.51)); +#275137 = VERTEX_POINT('',#275138); +#275138 = CARTESIAN_POINT('',(127.41,-120.4,1.545)); +#275139 = LINE('',#275140,#275141); +#275140 = CARTESIAN_POINT('',(127.41,-120.4,1.51)); +#275141 = VECTOR('',#275142,1.); +#275142 = DIRECTION('',(0.,0.,1.)); +#275143 = ORIENTED_EDGE('',*,*,#275144,.T.); +#275144 = EDGE_CURVE('',#275137,#275137,#275145,.T.); +#275145 = CIRCLE('',#275146,0.3); +#275146 = AXIS2_PLACEMENT_3D('',#275147,#275148,#275149); +#275147 = CARTESIAN_POINT('',(127.11,-120.4,1.545)); +#275148 = DIRECTION('',(0.,0.,1.)); +#275149 = DIRECTION('',(1.,0.,-0.)); +#275150 = ORIENTED_EDGE('',*,*,#275134,.F.); +#275151 = ORIENTED_EDGE('',*,*,#275152,.F.); +#275152 = EDGE_CURVE('',#275135,#275135,#275153,.T.); +#275153 = CIRCLE('',#275154,0.3); +#275154 = AXIS2_PLACEMENT_3D('',#275155,#275156,#275157); +#275155 = CARTESIAN_POINT('',(127.11,-120.4,1.51)); +#275156 = DIRECTION('',(0.,0.,1.)); +#275157 = DIRECTION('',(1.,0.,-0.)); +#275158 = CYLINDRICAL_SURFACE('',#275159,0.3); +#275159 = AXIS2_PLACEMENT_3D('',#275160,#275161,#275162); +#275160 = CARTESIAN_POINT('',(127.11,-120.4,1.51)); +#275161 = DIRECTION('',(-0.,-0.,-1.)); +#275162 = DIRECTION('',(1.,0.,-0.)); +#275163 = ADVANCED_FACE('',(#275164),#275191,.F.); +#275164 = FACE_BOUND('',#275165,.T.); +#275165 = EDGE_LOOP('',(#275166,#275176,#275183,#275184)); +#275166 = ORIENTED_EDGE('',*,*,#275167,.T.); +#275167 = EDGE_CURVE('',#275168,#275170,#275172,.T.); +#275168 = VERTEX_POINT('',#275169); +#275169 = CARTESIAN_POINT('',(127.247255,-120.4,1.51)); +#275170 = VERTEX_POINT('',#275171); +#275171 = CARTESIAN_POINT('',(127.247255,-120.4,1.545)); +#275172 = LINE('',#275173,#275174); +#275173 = CARTESIAN_POINT('',(127.247255,-120.4,1.51)); +#275174 = VECTOR('',#275175,1.); +#275175 = DIRECTION('',(0.,0.,1.)); +#275176 = ORIENTED_EDGE('',*,*,#275177,.T.); +#275177 = EDGE_CURVE('',#275170,#275170,#275178,.T.); +#275178 = CIRCLE('',#275179,0.137255); +#275179 = AXIS2_PLACEMENT_3D('',#275180,#275181,#275182); +#275180 = CARTESIAN_POINT('',(127.11,-120.4,1.545)); +#275181 = DIRECTION('',(0.,0.,1.)); +#275182 = DIRECTION('',(1.,0.,-0.)); +#275183 = ORIENTED_EDGE('',*,*,#275167,.F.); +#275184 = ORIENTED_EDGE('',*,*,#275185,.F.); +#275185 = EDGE_CURVE('',#275168,#275168,#275186,.T.); +#275186 = CIRCLE('',#275187,0.137255); +#275187 = AXIS2_PLACEMENT_3D('',#275188,#275189,#275190); +#275188 = CARTESIAN_POINT('',(127.11,-120.4,1.51)); +#275189 = DIRECTION('',(0.,0.,1.)); +#275190 = DIRECTION('',(1.,0.,-0.)); +#275191 = CYLINDRICAL_SURFACE('',#275192,0.137255); +#275192 = AXIS2_PLACEMENT_3D('',#275193,#275194,#275195); +#275193 = CARTESIAN_POINT('',(127.11,-120.4,1.51)); +#275194 = DIRECTION('',(-0.,-0.,-1.)); +#275195 = DIRECTION('',(1.,0.,-0.)); +#275196 = ADVANCED_FACE('',(#275197,#275200),#275203,.F.); +#275197 = FACE_BOUND('',#275198,.F.); +#275198 = EDGE_LOOP('',(#275199)); +#275199 = ORIENTED_EDGE('',*,*,#275152,.T.); +#275200 = FACE_BOUND('',#275201,.T.); +#275201 = EDGE_LOOP('',(#275202)); +#275202 = ORIENTED_EDGE('',*,*,#275185,.T.); +#275203 = PLANE('',#275204); +#275204 = AXIS2_PLACEMENT_3D('',#275205,#275206,#275207); +#275205 = CARTESIAN_POINT('',(0.,0.,1.51)); +#275206 = DIRECTION('',(0.,0.,1.)); +#275207 = DIRECTION('',(1.,0.,-0.)); +#275208 = ADVANCED_FACE('',(#275209,#275212),#275215,.T.); +#275209 = FACE_BOUND('',#275210,.T.); +#275210 = EDGE_LOOP('',(#275211)); +#275211 = ORIENTED_EDGE('',*,*,#275144,.T.); +#275212 = FACE_BOUND('',#275213,.F.); +#275213 = EDGE_LOOP('',(#275214)); +#275214 = ORIENTED_EDGE('',*,*,#275177,.T.); +#275215 = PLANE('',#275216); +#275216 = AXIS2_PLACEMENT_3D('',#275217,#275218,#275219); +#275217 = CARTESIAN_POINT('',(0.,0.,1.545)); +#275218 = DIRECTION('',(0.,0.,1.)); +#275219 = DIRECTION('',(1.,0.,-0.)); +#275220 = MANIFOLD_SOLID_BREP('',#275221); +#275221 = CLOSED_SHELL('',(#275222,#275255,#275288,#275300)); +#275222 = ADVANCED_FACE('',(#275223),#275250,.T.); +#275223 = FACE_BOUND('',#275224,.F.); +#275224 = EDGE_LOOP('',(#275225,#275235,#275242,#275243)); +#275225 = ORIENTED_EDGE('',*,*,#275226,.T.); +#275226 = EDGE_CURVE('',#275227,#275229,#275231,.T.); +#275227 = VERTEX_POINT('',#275228); +#275228 = CARTESIAN_POINT('',(122.8,-107.5,1.51)); +#275229 = VERTEX_POINT('',#275230); +#275230 = CARTESIAN_POINT('',(122.8,-107.5,1.545)); +#275231 = LINE('',#275232,#275233); +#275232 = CARTESIAN_POINT('',(122.8,-107.5,1.51)); +#275233 = VECTOR('',#275234,1.); +#275234 = DIRECTION('',(0.,0.,1.)); +#275235 = ORIENTED_EDGE('',*,*,#275236,.T.); +#275236 = EDGE_CURVE('',#275229,#275229,#275237,.T.); +#275237 = CIRCLE('',#275238,0.3); +#275238 = AXIS2_PLACEMENT_3D('',#275239,#275240,#275241); +#275239 = CARTESIAN_POINT('',(122.5,-107.5,1.545)); +#275240 = DIRECTION('',(0.,0.,1.)); +#275241 = DIRECTION('',(1.,0.,-0.)); +#275242 = ORIENTED_EDGE('',*,*,#275226,.F.); +#275243 = ORIENTED_EDGE('',*,*,#275244,.F.); +#275244 = EDGE_CURVE('',#275227,#275227,#275245,.T.); +#275245 = CIRCLE('',#275246,0.3); +#275246 = AXIS2_PLACEMENT_3D('',#275247,#275248,#275249); +#275247 = CARTESIAN_POINT('',(122.5,-107.5,1.51)); +#275248 = DIRECTION('',(0.,0.,1.)); +#275249 = DIRECTION('',(1.,0.,-0.)); +#275250 = CYLINDRICAL_SURFACE('',#275251,0.3); +#275251 = AXIS2_PLACEMENT_3D('',#275252,#275253,#275254); +#275252 = CARTESIAN_POINT('',(122.5,-107.5,1.51)); +#275253 = DIRECTION('',(-0.,-0.,-1.)); +#275254 = DIRECTION('',(1.,0.,-0.)); +#275255 = ADVANCED_FACE('',(#275256),#275283,.F.); +#275256 = FACE_BOUND('',#275257,.T.); +#275257 = EDGE_LOOP('',(#275258,#275268,#275275,#275276)); +#275258 = ORIENTED_EDGE('',*,*,#275259,.T.); +#275259 = EDGE_CURVE('',#275260,#275262,#275264,.T.); +#275260 = VERTEX_POINT('',#275261); +#275261 = CARTESIAN_POINT('',(122.637255,-107.5,1.51)); +#275262 = VERTEX_POINT('',#275263); +#275263 = CARTESIAN_POINT('',(122.637255,-107.5,1.545)); +#275264 = LINE('',#275265,#275266); +#275265 = CARTESIAN_POINT('',(122.637255,-107.5,1.51)); +#275266 = VECTOR('',#275267,1.); +#275267 = DIRECTION('',(0.,0.,1.)); +#275268 = ORIENTED_EDGE('',*,*,#275269,.T.); +#275269 = EDGE_CURVE('',#275262,#275262,#275270,.T.); +#275270 = CIRCLE('',#275271,0.137255); +#275271 = AXIS2_PLACEMENT_3D('',#275272,#275273,#275274); +#275272 = CARTESIAN_POINT('',(122.5,-107.5,1.545)); +#275273 = DIRECTION('',(0.,0.,1.)); +#275274 = DIRECTION('',(1.,0.,-0.)); +#275275 = ORIENTED_EDGE('',*,*,#275259,.F.); +#275276 = ORIENTED_EDGE('',*,*,#275277,.F.); +#275277 = EDGE_CURVE('',#275260,#275260,#275278,.T.); +#275278 = CIRCLE('',#275279,0.137255); +#275279 = AXIS2_PLACEMENT_3D('',#275280,#275281,#275282); +#275280 = CARTESIAN_POINT('',(122.5,-107.5,1.51)); +#275281 = DIRECTION('',(0.,0.,1.)); +#275282 = DIRECTION('',(1.,0.,-0.)); +#275283 = CYLINDRICAL_SURFACE('',#275284,0.137255); +#275284 = AXIS2_PLACEMENT_3D('',#275285,#275286,#275287); +#275285 = CARTESIAN_POINT('',(122.5,-107.5,1.51)); +#275286 = DIRECTION('',(-0.,-0.,-1.)); +#275287 = DIRECTION('',(1.,0.,-0.)); +#275288 = ADVANCED_FACE('',(#275289,#275292),#275295,.F.); +#275289 = FACE_BOUND('',#275290,.F.); +#275290 = EDGE_LOOP('',(#275291)); +#275291 = ORIENTED_EDGE('',*,*,#275244,.T.); +#275292 = FACE_BOUND('',#275293,.T.); +#275293 = EDGE_LOOP('',(#275294)); +#275294 = ORIENTED_EDGE('',*,*,#275277,.T.); +#275295 = PLANE('',#275296); +#275296 = AXIS2_PLACEMENT_3D('',#275297,#275298,#275299); +#275297 = CARTESIAN_POINT('',(0.,0.,1.51)); +#275298 = DIRECTION('',(0.,0.,1.)); +#275299 = DIRECTION('',(1.,0.,-0.)); +#275300 = ADVANCED_FACE('',(#275301,#275304),#275307,.T.); +#275301 = FACE_BOUND('',#275302,.T.); +#275302 = EDGE_LOOP('',(#275303)); +#275303 = ORIENTED_EDGE('',*,*,#275236,.T.); +#275304 = FACE_BOUND('',#275305,.F.); +#275305 = EDGE_LOOP('',(#275306)); +#275306 = ORIENTED_EDGE('',*,*,#275269,.T.); +#275307 = PLANE('',#275308); +#275308 = AXIS2_PLACEMENT_3D('',#275309,#275310,#275311); +#275309 = CARTESIAN_POINT('',(0.,0.,1.545)); +#275310 = DIRECTION('',(0.,0.,1.)); +#275311 = DIRECTION('',(1.,0.,-0.)); +#275312 = MANIFOLD_SOLID_BREP('',#275313); +#275313 = CLOSED_SHELL('',(#275314,#275354,#275385,#275416,#275449, + #275480,#275511,#275542,#275573,#275604,#275635,#275666,#275697, + #275730,#275752,#275785,#275810)); +#275314 = ADVANCED_FACE('',(#275315),#275349,.T.); +#275315 = FACE_BOUND('',#275316,.T.); +#275316 = EDGE_LOOP('',(#275317,#275327,#275335,#275343)); +#275317 = ORIENTED_EDGE('',*,*,#275318,.T.); +#275318 = EDGE_CURVE('',#275319,#275321,#275323,.T.); +#275319 = VERTEX_POINT('',#275320); +#275320 = CARTESIAN_POINT('',(148.2695,-91.628078,1.51)); +#275321 = VERTEX_POINT('',#275322); +#275322 = CARTESIAN_POINT('',(148.2695,-91.628078,1.545)); +#275323 = LINE('',#275324,#275325); +#275324 = CARTESIAN_POINT('',(148.2695,-91.628078,1.51)); +#275325 = VECTOR('',#275326,1.); +#275326 = DIRECTION('',(0.,0.,1.)); +#275327 = ORIENTED_EDGE('',*,*,#275328,.T.); +#275328 = EDGE_CURVE('',#275321,#275329,#275331,.T.); +#275329 = VERTEX_POINT('',#275330); +#275330 = CARTESIAN_POINT('',(148.583147,-91.944443,1.545)); +#275331 = LINE('',#275332,#275333); +#275332 = CARTESIAN_POINT('',(148.2695,-91.628078,1.545)); +#275333 = VECTOR('',#275334,1.); +#275334 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#275335 = ORIENTED_EDGE('',*,*,#275336,.F.); +#275336 = EDGE_CURVE('',#275337,#275329,#275339,.T.); +#275337 = VERTEX_POINT('',#275338); +#275338 = CARTESIAN_POINT('',(148.583147,-91.944443,1.51)); +#275339 = LINE('',#275340,#275341); +#275340 = CARTESIAN_POINT('',(148.583147,-91.944443,1.51)); +#275341 = VECTOR('',#275342,1.); +#275342 = DIRECTION('',(0.,0.,1.)); +#275343 = ORIENTED_EDGE('',*,*,#275344,.F.); +#275344 = EDGE_CURVE('',#275319,#275337,#275345,.T.); +#275345 = LINE('',#275346,#275347); +#275346 = CARTESIAN_POINT('',(148.2695,-91.628078,1.51)); +#275347 = VECTOR('',#275348,1.); +#275348 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#275349 = PLANE('',#275350); +#275350 = AXIS2_PLACEMENT_3D('',#275351,#275352,#275353); +#275351 = CARTESIAN_POINT('',(148.2695,-91.628078,1.51)); +#275352 = DIRECTION('',(0.710150775007,0.704049626629,-0.)); +#275353 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#275354 = ADVANCED_FACE('',(#275355),#275380,.T.); +#275355 = FACE_BOUND('',#275356,.T.); +#275356 = EDGE_LOOP('',(#275357,#275358,#275366,#275374)); +#275357 = ORIENTED_EDGE('',*,*,#275336,.T.); +#275358 = ORIENTED_EDGE('',*,*,#275359,.T.); +#275359 = EDGE_CURVE('',#275329,#275360,#275362,.T.); +#275360 = VERTEX_POINT('',#275361); +#275361 = CARTESIAN_POINT('',(148.598079,-91.980491,1.545)); +#275362 = LINE('',#275363,#275364); +#275363 = CARTESIAN_POINT('',(148.583147,-91.944443,1.545)); +#275364 = VECTOR('',#275365,1.); +#275365 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#275366 = ORIENTED_EDGE('',*,*,#275367,.F.); +#275367 = EDGE_CURVE('',#275368,#275360,#275370,.T.); +#275368 = VERTEX_POINT('',#275369); +#275369 = CARTESIAN_POINT('',(148.598079,-91.980491,1.51)); +#275370 = LINE('',#275371,#275372); +#275371 = CARTESIAN_POINT('',(148.598079,-91.980491,1.51)); +#275372 = VECTOR('',#275373,1.); +#275373 = DIRECTION('',(0.,0.,1.)); +#275374 = ORIENTED_EDGE('',*,*,#275375,.F.); +#275375 = EDGE_CURVE('',#275337,#275368,#275376,.T.); +#275376 = LINE('',#275377,#275378); +#275377 = CARTESIAN_POINT('',(148.583147,-91.944443,1.51)); +#275378 = VECTOR('',#275379,1.); +#275379 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#275380 = PLANE('',#275381); +#275381 = AXIS2_PLACEMENT_3D('',#275382,#275383,#275384); +#275382 = CARTESIAN_POINT('',(148.583147,-91.944443,1.51)); +#275383 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#275384 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#275385 = ADVANCED_FACE('',(#275386),#275411,.T.); +#275386 = FACE_BOUND('',#275387,.T.); +#275387 = EDGE_LOOP('',(#275388,#275389,#275397,#275405)); +#275388 = ORIENTED_EDGE('',*,*,#275367,.T.); +#275389 = ORIENTED_EDGE('',*,*,#275390,.T.); +#275390 = EDGE_CURVE('',#275360,#275391,#275393,.T.); +#275391 = VERTEX_POINT('',#275392); +#275392 = CARTESIAN_POINT('',(148.598079,-92.539509,1.545)); +#275393 = LINE('',#275394,#275395); +#275394 = CARTESIAN_POINT('',(148.598079,-91.980491,1.545)); +#275395 = VECTOR('',#275396,1.); +#275396 = DIRECTION('',(0.,-1.,0.)); +#275397 = ORIENTED_EDGE('',*,*,#275398,.F.); +#275398 = EDGE_CURVE('',#275399,#275391,#275401,.T.); +#275399 = VERTEX_POINT('',#275400); +#275400 = CARTESIAN_POINT('',(148.598079,-92.539509,1.51)); +#275401 = LINE('',#275402,#275403); +#275402 = CARTESIAN_POINT('',(148.598079,-92.539509,1.51)); +#275403 = VECTOR('',#275404,1.); +#275404 = DIRECTION('',(0.,0.,1.)); +#275405 = ORIENTED_EDGE('',*,*,#275406,.F.); +#275406 = EDGE_CURVE('',#275368,#275399,#275407,.T.); +#275407 = LINE('',#275408,#275409); +#275408 = CARTESIAN_POINT('',(148.598079,-91.980491,1.51)); +#275409 = VECTOR('',#275410,1.); +#275410 = DIRECTION('',(0.,-1.,0.)); +#275411 = PLANE('',#275412); +#275412 = AXIS2_PLACEMENT_3D('',#275413,#275414,#275415); +#275413 = CARTESIAN_POINT('',(148.598079,-91.980491,1.51)); +#275414 = DIRECTION('',(1.,0.,-0.)); +#275415 = DIRECTION('',(0.,-1.,0.)); +#275416 = ADVANCED_FACE('',(#275417),#275444,.T.); +#275417 = FACE_BOUND('',#275418,.T.); +#275418 = EDGE_LOOP('',(#275419,#275420,#275429,#275437)); +#275419 = ORIENTED_EDGE('',*,*,#275398,.T.); +#275420 = ORIENTED_EDGE('',*,*,#275421,.T.); +#275421 = EDGE_CURVE('',#275391,#275422,#275424,.T.); +#275422 = VERTEX_POINT('',#275423); +#275423 = CARTESIAN_POINT('',(148.519509,-92.618079,1.545)); +#275424 = CIRCLE('',#275425,0.100002891901); +#275425 = AXIS2_PLACEMENT_3D('',#275426,#275427,#275428); +#275426 = CARTESIAN_POINT('',(148.49999792896,-92.51999792896,1.545)); +#275427 = DIRECTION('',(0.,0.,-1.)); +#275428 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#275429 = ORIENTED_EDGE('',*,*,#275430,.F.); +#275430 = EDGE_CURVE('',#275431,#275422,#275433,.T.); +#275431 = VERTEX_POINT('',#275432); +#275432 = CARTESIAN_POINT('',(148.519509,-92.618079,1.51)); +#275433 = LINE('',#275434,#275435); +#275434 = CARTESIAN_POINT('',(148.519509,-92.618079,1.51)); +#275435 = VECTOR('',#275436,1.); +#275436 = DIRECTION('',(0.,0.,1.)); +#275437 = ORIENTED_EDGE('',*,*,#275438,.F.); +#275438 = EDGE_CURVE('',#275399,#275431,#275439,.T.); +#275439 = CIRCLE('',#275440,0.100002891901); +#275440 = AXIS2_PLACEMENT_3D('',#275441,#275442,#275443); +#275441 = CARTESIAN_POINT('',(148.49999792896,-92.51999792896,1.51)); +#275442 = DIRECTION('',(0.,0.,-1.)); +#275443 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#275444 = CYLINDRICAL_SURFACE('',#275445,0.100002891901); +#275445 = AXIS2_PLACEMENT_3D('',#275446,#275447,#275448); +#275446 = CARTESIAN_POINT('',(148.49999792896,-92.51999792896,1.51)); +#275447 = DIRECTION('',(0.,0.,-1.)); +#275448 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#275449 = ADVANCED_FACE('',(#275450),#275475,.T.); +#275450 = FACE_BOUND('',#275451,.T.); +#275451 = EDGE_LOOP('',(#275452,#275453,#275461,#275469)); +#275452 = ORIENTED_EDGE('',*,*,#275430,.T.); +#275453 = ORIENTED_EDGE('',*,*,#275454,.T.); +#275454 = EDGE_CURVE('',#275422,#275455,#275457,.T.); +#275455 = VERTEX_POINT('',#275456); +#275456 = CARTESIAN_POINT('',(146.721039,-92.61979,1.545)); +#275457 = LINE('',#275458,#275459); +#275458 = CARTESIAN_POINT('',(148.519509,-92.618079,1.545)); +#275459 = VECTOR('',#275460,1.); +#275460 = DIRECTION('',(-0.999999547453,-9.513637846019E-04,0.)); +#275461 = ORIENTED_EDGE('',*,*,#275462,.F.); +#275462 = EDGE_CURVE('',#275463,#275455,#275465,.T.); +#275463 = VERTEX_POINT('',#275464); +#275464 = CARTESIAN_POINT('',(146.721039,-92.61979,1.51)); +#275465 = LINE('',#275466,#275467); +#275466 = CARTESIAN_POINT('',(146.721039,-92.61979,1.51)); +#275467 = VECTOR('',#275468,1.); +#275468 = DIRECTION('',(0.,0.,1.)); +#275469 = ORIENTED_EDGE('',*,*,#275470,.F.); +#275470 = EDGE_CURVE('',#275431,#275463,#275471,.T.); +#275471 = LINE('',#275472,#275473); +#275472 = CARTESIAN_POINT('',(148.519509,-92.618079,1.51)); +#275473 = VECTOR('',#275474,1.); +#275474 = DIRECTION('',(-0.999999547453,-9.513637846019E-04,0.)); +#275475 = PLANE('',#275476); +#275476 = AXIS2_PLACEMENT_3D('',#275477,#275478,#275479); +#275477 = CARTESIAN_POINT('',(148.519509,-92.618079,1.51)); +#275478 = DIRECTION('',(9.513637846019E-04,-0.999999547453,0.)); +#275479 = DIRECTION('',(-0.999999547453,-9.513637846019E-04,0.)); +#275480 = ADVANCED_FACE('',(#275481),#275506,.T.); +#275481 = FACE_BOUND('',#275482,.T.); +#275482 = EDGE_LOOP('',(#275483,#275484,#275492,#275500)); +#275483 = ORIENTED_EDGE('',*,*,#275462,.T.); +#275484 = ORIENTED_EDGE('',*,*,#275485,.T.); +#275485 = EDGE_CURVE('',#275455,#275486,#275488,.T.); +#275486 = VERTEX_POINT('',#275487); +#275487 = CARTESIAN_POINT('',(146.703388,-92.553915,1.545)); +#275488 = LINE('',#275489,#275490); +#275489 = CARTESIAN_POINT('',(146.721039,-92.61979,1.545)); +#275490 = VECTOR('',#275491,1.); +#275491 = DIRECTION('',(-0.258816951239,0.965926387336,0.)); +#275492 = ORIENTED_EDGE('',*,*,#275493,.F.); +#275493 = EDGE_CURVE('',#275494,#275486,#275496,.T.); +#275494 = VERTEX_POINT('',#275495); +#275495 = CARTESIAN_POINT('',(146.703388,-92.553915,1.51)); +#275496 = LINE('',#275497,#275498); +#275497 = CARTESIAN_POINT('',(146.703388,-92.553915,1.51)); +#275498 = VECTOR('',#275499,1.); +#275499 = DIRECTION('',(0.,0.,1.)); +#275500 = ORIENTED_EDGE('',*,*,#275501,.F.); +#275501 = EDGE_CURVE('',#275463,#275494,#275502,.T.); +#275502 = LINE('',#275503,#275504); +#275503 = CARTESIAN_POINT('',(146.721039,-92.61979,1.51)); +#275504 = VECTOR('',#275505,1.); +#275505 = DIRECTION('',(-0.258816951239,0.965926387336,0.)); +#275506 = PLANE('',#275507); +#275507 = AXIS2_PLACEMENT_3D('',#275508,#275509,#275510); +#275508 = CARTESIAN_POINT('',(146.721039,-92.61979,1.51)); +#275509 = DIRECTION('',(-0.965926387336,-0.258816951239,0.)); +#275510 = DIRECTION('',(-0.258816951239,0.965926387336,0.)); +#275511 = ADVANCED_FACE('',(#275512),#275537,.T.); +#275512 = FACE_BOUND('',#275513,.T.); +#275513 = EDGE_LOOP('',(#275514,#275515,#275523,#275531)); +#275514 = ORIENTED_EDGE('',*,*,#275493,.T.); +#275515 = ORIENTED_EDGE('',*,*,#275516,.T.); +#275516 = EDGE_CURVE('',#275486,#275517,#275519,.T.); +#275517 = VERTEX_POINT('',#275518); +#275518 = CARTESIAN_POINT('',(146.636509,-92.438076,1.545)); +#275519 = LINE('',#275520,#275521); +#275520 = CARTESIAN_POINT('',(146.703388,-92.553915,1.545)); +#275521 = VECTOR('',#275522,1.); +#275522 = DIRECTION('',(-0.499996199321,0.866027598097,0.)); +#275523 = ORIENTED_EDGE('',*,*,#275524,.F.); +#275524 = EDGE_CURVE('',#275525,#275517,#275527,.T.); +#275525 = VERTEX_POINT('',#275526); +#275526 = CARTESIAN_POINT('',(146.636509,-92.438076,1.51)); +#275527 = LINE('',#275528,#275529); +#275528 = CARTESIAN_POINT('',(146.636509,-92.438076,1.51)); +#275529 = VECTOR('',#275530,1.); +#275530 = DIRECTION('',(0.,0.,1.)); +#275531 = ORIENTED_EDGE('',*,*,#275532,.F.); +#275532 = EDGE_CURVE('',#275494,#275525,#275533,.T.); +#275533 = LINE('',#275534,#275535); +#275534 = CARTESIAN_POINT('',(146.703388,-92.553915,1.51)); +#275535 = VECTOR('',#275536,1.); +#275536 = DIRECTION('',(-0.499996199321,0.866027598097,0.)); +#275537 = PLANE('',#275538); +#275538 = AXIS2_PLACEMENT_3D('',#275539,#275540,#275541); +#275539 = CARTESIAN_POINT('',(146.703388,-92.553915,1.51)); +#275540 = DIRECTION('',(-0.866027598097,-0.499996199321,0.)); +#275541 = DIRECTION('',(-0.499996199321,0.866027598097,0.)); +#275542 = ADVANCED_FACE('',(#275543),#275568,.T.); +#275543 = FACE_BOUND('',#275544,.T.); +#275544 = EDGE_LOOP('',(#275545,#275546,#275554,#275562)); +#275545 = ORIENTED_EDGE('',*,*,#275524,.T.); +#275546 = ORIENTED_EDGE('',*,*,#275547,.T.); +#275547 = EDGE_CURVE('',#275517,#275548,#275550,.T.); +#275548 = VERTEX_POINT('',#275549); +#275549 = CARTESIAN_POINT('',(146.620177,-92.421744,1.545)); +#275550 = LINE('',#275551,#275552); +#275551 = CARTESIAN_POINT('',(146.636509,-92.438076,1.545)); +#275552 = VECTOR('',#275553,1.); +#275553 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#275554 = ORIENTED_EDGE('',*,*,#275555,.F.); +#275555 = EDGE_CURVE('',#275556,#275548,#275558,.T.); +#275556 = VERTEX_POINT('',#275557); +#275557 = CARTESIAN_POINT('',(146.620177,-92.421744,1.51)); +#275558 = LINE('',#275559,#275560); +#275559 = CARTESIAN_POINT('',(146.620177,-92.421744,1.51)); +#275560 = VECTOR('',#275561,1.); +#275561 = DIRECTION('',(0.,0.,1.)); +#275562 = ORIENTED_EDGE('',*,*,#275563,.F.); +#275563 = EDGE_CURVE('',#275525,#275556,#275564,.T.); +#275564 = LINE('',#275565,#275566); +#275565 = CARTESIAN_POINT('',(146.636509,-92.438076,1.51)); +#275566 = VECTOR('',#275567,1.); +#275567 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#275568 = PLANE('',#275569); +#275569 = AXIS2_PLACEMENT_3D('',#275570,#275571,#275572); +#275570 = CARTESIAN_POINT('',(146.636509,-92.438076,1.51)); +#275571 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#275572 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#275573 = ADVANCED_FACE('',(#275574),#275599,.T.); +#275574 = FACE_BOUND('',#275575,.T.); +#275575 = EDGE_LOOP('',(#275576,#275577,#275585,#275593)); +#275576 = ORIENTED_EDGE('',*,*,#275555,.T.); +#275577 = ORIENTED_EDGE('',*,*,#275578,.T.); +#275578 = EDGE_CURVE('',#275548,#275579,#275581,.T.); +#275579 = VERTEX_POINT('',#275580); +#275580 = CARTESIAN_POINT('',(148.4,-92.42,1.545)); +#275581 = LINE('',#275582,#275583); +#275582 = CARTESIAN_POINT('',(146.620177,-92.421744,1.545)); +#275583 = VECTOR('',#275584,1.); +#275584 = DIRECTION('',(0.999999519925,9.798722472693E-04,0.)); +#275585 = ORIENTED_EDGE('',*,*,#275586,.F.); +#275586 = EDGE_CURVE('',#275587,#275579,#275589,.T.); +#275587 = VERTEX_POINT('',#275588); +#275588 = CARTESIAN_POINT('',(148.4,-92.42,1.51)); +#275589 = LINE('',#275590,#275591); +#275590 = CARTESIAN_POINT('',(148.4,-92.42,1.51)); +#275591 = VECTOR('',#275592,1.); +#275592 = DIRECTION('',(0.,0.,1.)); +#275593 = ORIENTED_EDGE('',*,*,#275594,.F.); +#275594 = EDGE_CURVE('',#275556,#275587,#275595,.T.); +#275595 = LINE('',#275596,#275597); +#275596 = CARTESIAN_POINT('',(146.620177,-92.421744,1.51)); +#275597 = VECTOR('',#275598,1.); +#275598 = DIRECTION('',(0.999999519925,9.798722472693E-04,0.)); +#275599 = PLANE('',#275600); +#275600 = AXIS2_PLACEMENT_3D('',#275601,#275602,#275603); +#275601 = CARTESIAN_POINT('',(146.620177,-92.421744,1.51)); +#275602 = DIRECTION('',(-9.798722472693E-04,0.999999519925,0.)); +#275603 = DIRECTION('',(0.999999519925,9.798722472693E-04,0.)); +#275604 = ADVANCED_FACE('',(#275605),#275630,.T.); +#275605 = FACE_BOUND('',#275606,.T.); +#275606 = EDGE_LOOP('',(#275607,#275608,#275616,#275624)); +#275607 = ORIENTED_EDGE('',*,*,#275586,.T.); +#275608 = ORIENTED_EDGE('',*,*,#275609,.T.); +#275609 = EDGE_CURVE('',#275579,#275610,#275612,.T.); +#275610 = VERTEX_POINT('',#275611); +#275611 = CARTESIAN_POINT('',(148.4,-92.041422,1.545)); +#275612 = LINE('',#275613,#275614); +#275613 = CARTESIAN_POINT('',(148.4,-92.42,1.545)); +#275614 = VECTOR('',#275615,1.); +#275615 = DIRECTION('',(0.,1.,0.)); +#275616 = ORIENTED_EDGE('',*,*,#275617,.F.); +#275617 = EDGE_CURVE('',#275618,#275610,#275620,.T.); +#275618 = VERTEX_POINT('',#275619); +#275619 = CARTESIAN_POINT('',(148.4,-92.041422,1.51)); +#275620 = LINE('',#275621,#275622); +#275621 = CARTESIAN_POINT('',(148.4,-92.041422,1.51)); +#275622 = VECTOR('',#275623,1.); +#275623 = DIRECTION('',(0.,0.,1.)); +#275624 = ORIENTED_EDGE('',*,*,#275625,.F.); +#275625 = EDGE_CURVE('',#275587,#275618,#275626,.T.); +#275626 = LINE('',#275627,#275628); +#275627 = CARTESIAN_POINT('',(148.4,-92.42,1.51)); +#275628 = VECTOR('',#275629,1.); +#275629 = DIRECTION('',(0.,1.,0.)); +#275630 = PLANE('',#275631); +#275631 = AXIS2_PLACEMENT_3D('',#275632,#275633,#275634); +#275632 = CARTESIAN_POINT('',(148.4,-92.42,1.51)); +#275633 = DIRECTION('',(-1.,0.,0.)); +#275634 = DIRECTION('',(0.,1.,0.)); +#275635 = ADVANCED_FACE('',(#275636),#275661,.T.); +#275636 = FACE_BOUND('',#275637,.T.); +#275637 = EDGE_LOOP('',(#275638,#275639,#275647,#275655)); +#275638 = ORIENTED_EDGE('',*,*,#275617,.T.); +#275639 = ORIENTED_EDGE('',*,*,#275640,.T.); +#275640 = EDGE_CURVE('',#275610,#275641,#275643,.T.); +#275641 = VERTEX_POINT('',#275642); +#275642 = CARTESIAN_POINT('',(148.128078,-91.7695,1.545)); +#275643 = LINE('',#275644,#275645); +#275644 = CARTESIAN_POINT('',(148.4,-92.041422,1.545)); +#275645 = VECTOR('',#275646,1.); +#275646 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#275647 = ORIENTED_EDGE('',*,*,#275648,.F.); +#275648 = EDGE_CURVE('',#275649,#275641,#275651,.T.); +#275649 = VERTEX_POINT('',#275650); +#275650 = CARTESIAN_POINT('',(148.128078,-91.7695,1.51)); +#275651 = LINE('',#275652,#275653); +#275652 = CARTESIAN_POINT('',(148.128078,-91.7695,1.51)); +#275653 = VECTOR('',#275654,1.); +#275654 = DIRECTION('',(0.,0.,1.)); +#275655 = ORIENTED_EDGE('',*,*,#275656,.F.); +#275656 = EDGE_CURVE('',#275618,#275649,#275657,.T.); +#275657 = LINE('',#275658,#275659); +#275658 = CARTESIAN_POINT('',(148.4,-92.041422,1.51)); +#275659 = VECTOR('',#275660,1.); +#275660 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#275661 = PLANE('',#275662); +#275662 = AXIS2_PLACEMENT_3D('',#275663,#275664,#275665); +#275663 = CARTESIAN_POINT('',(148.4,-92.041422,1.51)); +#275664 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#275665 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#275666 = ADVANCED_FACE('',(#275667),#275692,.T.); +#275667 = FACE_BOUND('',#275668,.T.); +#275668 = EDGE_LOOP('',(#275669,#275670,#275678,#275686)); +#275669 = ORIENTED_EDGE('',*,*,#275648,.T.); +#275670 = ORIENTED_EDGE('',*,*,#275671,.T.); +#275671 = EDGE_CURVE('',#275641,#275672,#275674,.T.); +#275672 = VERTEX_POINT('',#275673); +#275673 = CARTESIAN_POINT('',(148.114805,-91.777164,1.545)); +#275674 = LINE('',#275675,#275676); +#275675 = CARTESIAN_POINT('',(148.128078,-91.7695,1.545)); +#275676 = VECTOR('',#275677,1.); +#275677 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#275678 = ORIENTED_EDGE('',*,*,#275679,.F.); +#275679 = EDGE_CURVE('',#275680,#275672,#275682,.T.); +#275680 = VERTEX_POINT('',#275681); +#275681 = CARTESIAN_POINT('',(148.114805,-91.777164,1.51)); +#275682 = LINE('',#275683,#275684); +#275683 = CARTESIAN_POINT('',(148.114805,-91.777164,1.51)); +#275684 = VECTOR('',#275685,1.); +#275685 = DIRECTION('',(0.,0.,1.)); +#275686 = ORIENTED_EDGE('',*,*,#275687,.F.); +#275687 = EDGE_CURVE('',#275649,#275680,#275688,.T.); +#275688 = LINE('',#275689,#275690); +#275689 = CARTESIAN_POINT('',(148.128078,-91.7695,1.51)); +#275690 = VECTOR('',#275691,1.); +#275691 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#275692 = PLANE('',#275693); +#275693 = AXIS2_PLACEMENT_3D('',#275694,#275695,#275696); +#275694 = CARTESIAN_POINT('',(148.128078,-91.7695,1.51)); +#275695 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#275696 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#275697 = ADVANCED_FACE('',(#275698),#275725,.T.); +#275698 = FACE_BOUND('',#275699,.T.); +#275699 = EDGE_LOOP('',(#275700,#275701,#275710,#275718)); +#275700 = ORIENTED_EDGE('',*,*,#275679,.T.); +#275701 = ORIENTED_EDGE('',*,*,#275702,.T.); +#275702 = EDGE_CURVE('',#275672,#275703,#275705,.T.); +#275703 = VERTEX_POINT('',#275704); +#275704 = CARTESIAN_POINT('',(148.277164,-91.614805,1.545)); +#275705 = CIRCLE('',#275706,0.300000118202); +#275706 = AXIS2_PLACEMENT_3D('',#275707,#275708,#275709); +#275707 = CARTESIAN_POINT('',(148.,-91.5,1.545)); +#275708 = DIRECTION('',(0.,0.,-1.)); +#275709 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#275710 = ORIENTED_EDGE('',*,*,#275711,.F.); +#275711 = EDGE_CURVE('',#275712,#275703,#275714,.T.); +#275712 = VERTEX_POINT('',#275713); +#275713 = CARTESIAN_POINT('',(148.277164,-91.614805,1.51)); +#275714 = LINE('',#275715,#275716); +#275715 = CARTESIAN_POINT('',(148.277164,-91.614805,1.51)); +#275716 = VECTOR('',#275717,1.); +#275717 = DIRECTION('',(0.,0.,1.)); +#275718 = ORIENTED_EDGE('',*,*,#275719,.F.); +#275719 = EDGE_CURVE('',#275680,#275712,#275720,.T.); +#275720 = CIRCLE('',#275721,0.300000118202); +#275721 = AXIS2_PLACEMENT_3D('',#275722,#275723,#275724); +#275722 = CARTESIAN_POINT('',(148.,-91.5,1.51)); +#275723 = DIRECTION('',(0.,0.,-1.)); +#275724 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#275725 = CYLINDRICAL_SURFACE('',#275726,0.300000118202); +#275726 = AXIS2_PLACEMENT_3D('',#275727,#275728,#275729); +#275727 = CARTESIAN_POINT('',(148.,-91.5,1.51)); +#275728 = DIRECTION('',(0.,0.,-1.)); +#275729 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#275730 = ADVANCED_FACE('',(#275731),#275747,.T.); +#275731 = FACE_BOUND('',#275732,.T.); +#275732 = EDGE_LOOP('',(#275733,#275734,#275740,#275741)); +#275733 = ORIENTED_EDGE('',*,*,#275711,.T.); +#275734 = ORIENTED_EDGE('',*,*,#275735,.T.); +#275735 = EDGE_CURVE('',#275703,#275321,#275736,.T.); +#275736 = LINE('',#275737,#275738); +#275737 = CARTESIAN_POINT('',(148.277164,-91.614805,1.545)); +#275738 = VECTOR('',#275739,1.); +#275739 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#275740 = ORIENTED_EDGE('',*,*,#275318,.F.); +#275741 = ORIENTED_EDGE('',*,*,#275742,.F.); +#275742 = EDGE_CURVE('',#275712,#275319,#275743,.T.); +#275743 = LINE('',#275744,#275745); +#275744 = CARTESIAN_POINT('',(148.277164,-91.614805,1.51)); +#275745 = VECTOR('',#275746,1.); +#275746 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#275747 = PLANE('',#275748); +#275748 = AXIS2_PLACEMENT_3D('',#275749,#275750,#275751); +#275749 = CARTESIAN_POINT('',(148.277164,-91.614805,1.51)); +#275750 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#275751 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#275752 = ADVANCED_FACE('',(#275753),#275780,.F.); +#275753 = FACE_BOUND('',#275754,.T.); +#275754 = EDGE_LOOP('',(#275755,#275765,#275772,#275773)); +#275755 = ORIENTED_EDGE('',*,*,#275756,.T.); +#275756 = EDGE_CURVE('',#275757,#275759,#275761,.T.); +#275757 = VERTEX_POINT('',#275758); +#275758 = CARTESIAN_POINT('',(148.137255,-91.5,1.51)); +#275759 = VERTEX_POINT('',#275760); +#275760 = CARTESIAN_POINT('',(148.137255,-91.5,1.545)); +#275761 = LINE('',#275762,#275763); +#275762 = CARTESIAN_POINT('',(148.137255,-91.5,1.51)); +#275763 = VECTOR('',#275764,1.); +#275764 = DIRECTION('',(0.,0.,1.)); +#275765 = ORIENTED_EDGE('',*,*,#275766,.T.); +#275766 = EDGE_CURVE('',#275759,#275759,#275767,.T.); +#275767 = CIRCLE('',#275768,0.137255); +#275768 = AXIS2_PLACEMENT_3D('',#275769,#275770,#275771); +#275769 = CARTESIAN_POINT('',(148.,-91.5,1.545)); +#275770 = DIRECTION('',(0.,0.,1.)); +#275771 = DIRECTION('',(1.,0.,-0.)); +#275772 = ORIENTED_EDGE('',*,*,#275756,.F.); +#275773 = ORIENTED_EDGE('',*,*,#275774,.F.); +#275774 = EDGE_CURVE('',#275757,#275757,#275775,.T.); +#275775 = CIRCLE('',#275776,0.137255); +#275776 = AXIS2_PLACEMENT_3D('',#275777,#275778,#275779); +#275777 = CARTESIAN_POINT('',(148.,-91.5,1.51)); +#275778 = DIRECTION('',(0.,0.,1.)); +#275779 = DIRECTION('',(1.,0.,-0.)); +#275780 = CYLINDRICAL_SURFACE('',#275781,0.137255); +#275781 = AXIS2_PLACEMENT_3D('',#275782,#275783,#275784); +#275782 = CARTESIAN_POINT('',(148.,-91.5,1.51)); +#275783 = DIRECTION('',(-0.,-0.,-1.)); +#275784 = DIRECTION('',(1.,0.,-0.)); +#275785 = ADVANCED_FACE('',(#275786,#275802),#275805,.F.); +#275786 = FACE_BOUND('',#275787,.T.); +#275787 = EDGE_LOOP('',(#275788,#275789,#275790,#275791,#275792,#275793, + #275794,#275795,#275796,#275797,#275798,#275799,#275800,#275801)); +#275788 = ORIENTED_EDGE('',*,*,#275344,.T.); +#275789 = ORIENTED_EDGE('',*,*,#275375,.T.); +#275790 = ORIENTED_EDGE('',*,*,#275406,.T.); +#275791 = ORIENTED_EDGE('',*,*,#275438,.T.); +#275792 = ORIENTED_EDGE('',*,*,#275470,.T.); +#275793 = ORIENTED_EDGE('',*,*,#275501,.T.); +#275794 = ORIENTED_EDGE('',*,*,#275532,.T.); +#275795 = ORIENTED_EDGE('',*,*,#275563,.T.); +#275796 = ORIENTED_EDGE('',*,*,#275594,.T.); +#275797 = ORIENTED_EDGE('',*,*,#275625,.T.); +#275798 = ORIENTED_EDGE('',*,*,#275656,.T.); +#275799 = ORIENTED_EDGE('',*,*,#275687,.T.); +#275800 = ORIENTED_EDGE('',*,*,#275719,.T.); +#275801 = ORIENTED_EDGE('',*,*,#275742,.T.); +#275802 = FACE_BOUND('',#275803,.T.); +#275803 = EDGE_LOOP('',(#275804)); +#275804 = ORIENTED_EDGE('',*,*,#275774,.T.); +#275805 = PLANE('',#275806); +#275806 = AXIS2_PLACEMENT_3D('',#275807,#275808,#275809); +#275807 = CARTESIAN_POINT('',(0.,0.,1.51)); +#275808 = DIRECTION('',(0.,0.,1.)); +#275809 = DIRECTION('',(1.,0.,-0.)); +#275810 = ADVANCED_FACE('',(#275811,#275827),#275830,.T.); +#275811 = FACE_BOUND('',#275812,.F.); +#275812 = EDGE_LOOP('',(#275813,#275814,#275815,#275816,#275817,#275818, + #275819,#275820,#275821,#275822,#275823,#275824,#275825,#275826)); +#275813 = ORIENTED_EDGE('',*,*,#275328,.T.); +#275814 = ORIENTED_EDGE('',*,*,#275359,.T.); +#275815 = ORIENTED_EDGE('',*,*,#275390,.T.); +#275816 = ORIENTED_EDGE('',*,*,#275421,.T.); +#275817 = ORIENTED_EDGE('',*,*,#275454,.T.); +#275818 = ORIENTED_EDGE('',*,*,#275485,.T.); +#275819 = ORIENTED_EDGE('',*,*,#275516,.T.); +#275820 = ORIENTED_EDGE('',*,*,#275547,.T.); +#275821 = ORIENTED_EDGE('',*,*,#275578,.T.); +#275822 = ORIENTED_EDGE('',*,*,#275609,.T.); +#275823 = ORIENTED_EDGE('',*,*,#275640,.T.); +#275824 = ORIENTED_EDGE('',*,*,#275671,.T.); +#275825 = ORIENTED_EDGE('',*,*,#275702,.T.); +#275826 = ORIENTED_EDGE('',*,*,#275735,.T.); +#275827 = FACE_BOUND('',#275828,.F.); +#275828 = EDGE_LOOP('',(#275829)); +#275829 = ORIENTED_EDGE('',*,*,#275766,.T.); +#275830 = PLANE('',#275831); +#275831 = AXIS2_PLACEMENT_3D('',#275832,#275833,#275834); +#275832 = CARTESIAN_POINT('',(0.,0.,1.545)); +#275833 = DIRECTION('',(0.,0.,1.)); +#275834 = DIRECTION('',(1.,0.,-0.)); +#275835 = MANIFOLD_SOLID_BREP('',#275836); +#275836 = CLOSED_SHELL('',(#275837,#275877,#275908,#275939,#275970, + #276001,#276034,#276065,#276096,#276127,#276158,#276189,#276211, + #276244,#276267)); +#275837 = ADVANCED_FACE('',(#275838),#275872,.T.); +#275838 = FACE_BOUND('',#275839,.T.); +#275839 = EDGE_LOOP('',(#275840,#275850,#275858,#275866)); +#275840 = ORIENTED_EDGE('',*,*,#275841,.T.); +#275841 = EDGE_CURVE('',#275842,#275844,#275846,.T.); +#275842 = VERTEX_POINT('',#275843); +#275843 = CARTESIAN_POINT('',(135.,-87.032473,1.51)); +#275844 = VERTEX_POINT('',#275845); +#275845 = CARTESIAN_POINT('',(135.,-87.032473,1.545)); +#275846 = LINE('',#275847,#275848); +#275847 = CARTESIAN_POINT('',(135.,-87.032473,1.51)); +#275848 = VECTOR('',#275849,1.); +#275849 = DIRECTION('',(0.,0.,1.)); +#275850 = ORIENTED_EDGE('',*,*,#275851,.T.); +#275851 = EDGE_CURVE('',#275844,#275852,#275854,.T.); +#275852 = VERTEX_POINT('',#275853); +#275853 = CARTESIAN_POINT('',(135.066479,-87.028116,1.545)); +#275854 = LINE('',#275855,#275856); +#275855 = CARTESIAN_POINT('',(135.,-87.032473,1.545)); +#275856 = VECTOR('',#275857,1.); +#275857 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#275858 = ORIENTED_EDGE('',*,*,#275859,.F.); +#275859 = EDGE_CURVE('',#275860,#275852,#275862,.T.); +#275860 = VERTEX_POINT('',#275861); +#275861 = CARTESIAN_POINT('',(135.066479,-87.028116,1.51)); +#275862 = LINE('',#275863,#275864); +#275863 = CARTESIAN_POINT('',(135.066479,-87.028116,1.51)); +#275864 = VECTOR('',#275865,1.); +#275865 = DIRECTION('',(0.,0.,1.)); +#275866 = ORIENTED_EDGE('',*,*,#275867,.F.); +#275867 = EDGE_CURVE('',#275842,#275860,#275868,.T.); +#275868 = LINE('',#275869,#275870); +#275869 = CARTESIAN_POINT('',(135.,-87.032473,1.51)); +#275870 = VECTOR('',#275871,1.); +#275871 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#275872 = PLANE('',#275873); +#275873 = AXIS2_PLACEMENT_3D('',#275874,#275875,#275876); +#275874 = CARTESIAN_POINT('',(135.,-87.032473,1.51)); +#275875 = DIRECTION('',(-6.539918552822E-02,0.997859181715,0.)); +#275876 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#275877 = ADVANCED_FACE('',(#275878),#275903,.T.); +#275878 = FACE_BOUND('',#275879,.T.); +#275879 = EDGE_LOOP('',(#275880,#275881,#275889,#275897)); +#275880 = ORIENTED_EDGE('',*,*,#275859,.T.); +#275881 = ORIENTED_EDGE('',*,*,#275882,.T.); +#275882 = EDGE_CURVE('',#275852,#275883,#275885,.T.); +#275883 = VERTEX_POINT('',#275884); +#275884 = CARTESIAN_POINT('',(135.099119,-87.019369,1.545)); +#275885 = LINE('',#275886,#275887); +#275886 = CARTESIAN_POINT('',(135.066479,-87.028116,1.545)); +#275887 = VECTOR('',#275888,1.); +#275888 = DIRECTION('',(0.965917403896,0.258850475854,0.)); +#275889 = ORIENTED_EDGE('',*,*,#275890,.F.); +#275890 = EDGE_CURVE('',#275891,#275883,#275893,.T.); +#275891 = VERTEX_POINT('',#275892); +#275892 = CARTESIAN_POINT('',(135.099119,-87.019369,1.51)); +#275893 = LINE('',#275894,#275895); +#275894 = CARTESIAN_POINT('',(135.099119,-87.019369,1.51)); +#275895 = VECTOR('',#275896,1.); +#275896 = DIRECTION('',(0.,0.,1.)); +#275897 = ORIENTED_EDGE('',*,*,#275898,.F.); +#275898 = EDGE_CURVE('',#275860,#275891,#275899,.T.); +#275899 = LINE('',#275900,#275901); +#275900 = CARTESIAN_POINT('',(135.066479,-87.028116,1.51)); +#275901 = VECTOR('',#275902,1.); +#275902 = DIRECTION('',(0.965917403896,0.258850475854,0.)); +#275903 = PLANE('',#275904); +#275904 = AXIS2_PLACEMENT_3D('',#275905,#275906,#275907); +#275905 = CARTESIAN_POINT('',(135.066479,-87.028116,1.51)); +#275906 = DIRECTION('',(-0.258850475854,0.965917403896,0.)); +#275907 = DIRECTION('',(0.965917403896,0.258850475854,0.)); +#275908 = ADVANCED_FACE('',(#275909),#275934,.T.); +#275909 = FACE_BOUND('',#275910,.T.); +#275910 = EDGE_LOOP('',(#275911,#275912,#275920,#275928)); +#275911 = ORIENTED_EDGE('',*,*,#275890,.T.); +#275912 = ORIENTED_EDGE('',*,*,#275913,.T.); +#275913 = EDGE_CURVE('',#275883,#275914,#275916,.T.); +#275914 = VERTEX_POINT('',#275915); +#275915 = CARTESIAN_POINT('',(135.1,-87.458578,1.545)); +#275916 = LINE('',#275917,#275918); +#275917 = CARTESIAN_POINT('',(135.099119,-87.019369,1.545)); +#275918 = VECTOR('',#275919,1.); +#275919 = DIRECTION('',(2.005874714827E-03,-0.999997988231,0.)); +#275920 = ORIENTED_EDGE('',*,*,#275921,.F.); +#275921 = EDGE_CURVE('',#275922,#275914,#275924,.T.); +#275922 = VERTEX_POINT('',#275923); +#275923 = CARTESIAN_POINT('',(135.1,-87.458578,1.51)); +#275924 = LINE('',#275925,#275926); +#275925 = CARTESIAN_POINT('',(135.1,-87.458578,1.51)); +#275926 = VECTOR('',#275927,1.); +#275927 = DIRECTION('',(0.,0.,1.)); +#275928 = ORIENTED_EDGE('',*,*,#275929,.F.); +#275929 = EDGE_CURVE('',#275891,#275922,#275930,.T.); +#275930 = LINE('',#275931,#275932); +#275931 = CARTESIAN_POINT('',(135.099119,-87.019369,1.51)); +#275932 = VECTOR('',#275933,1.); +#275933 = DIRECTION('',(2.005874714827E-03,-0.999997988231,0.)); +#275934 = PLANE('',#275935); +#275935 = AXIS2_PLACEMENT_3D('',#275936,#275937,#275938); +#275936 = CARTESIAN_POINT('',(135.099119,-87.019369,1.51)); +#275937 = DIRECTION('',(0.999997988231,2.005874714827E-03,-0.)); +#275938 = DIRECTION('',(2.005874714827E-03,-0.999997988231,0.)); +#275939 = ADVANCED_FACE('',(#275940),#275965,.T.); +#275940 = FACE_BOUND('',#275941,.T.); +#275941 = EDGE_LOOP('',(#275942,#275943,#275951,#275959)); +#275942 = ORIENTED_EDGE('',*,*,#275921,.T.); +#275943 = ORIENTED_EDGE('',*,*,#275944,.T.); +#275944 = EDGE_CURVE('',#275914,#275945,#275947,.T.); +#275945 = VERTEX_POINT('',#275946); +#275946 = CARTESIAN_POINT('',(135.371921,-87.730499,1.545)); +#275947 = LINE('',#275948,#275949); +#275948 = CARTESIAN_POINT('',(135.1,-87.458578,1.545)); +#275949 = VECTOR('',#275950,1.); +#275950 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#275951 = ORIENTED_EDGE('',*,*,#275952,.F.); +#275952 = EDGE_CURVE('',#275953,#275945,#275955,.T.); +#275953 = VERTEX_POINT('',#275954); +#275954 = CARTESIAN_POINT('',(135.371921,-87.730499,1.51)); +#275955 = LINE('',#275956,#275957); +#275956 = CARTESIAN_POINT('',(135.371921,-87.730499,1.51)); +#275957 = VECTOR('',#275958,1.); +#275958 = DIRECTION('',(0.,0.,1.)); +#275959 = ORIENTED_EDGE('',*,*,#275960,.F.); +#275960 = EDGE_CURVE('',#275922,#275953,#275961,.T.); +#275961 = LINE('',#275962,#275963); +#275962 = CARTESIAN_POINT('',(135.1,-87.458578,1.51)); +#275963 = VECTOR('',#275964,1.); +#275964 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#275965 = PLANE('',#275966); +#275966 = AXIS2_PLACEMENT_3D('',#275967,#275968,#275969); +#275967 = CARTESIAN_POINT('',(135.1,-87.458578,1.51)); +#275968 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#275969 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#275970 = ADVANCED_FACE('',(#275971),#275996,.T.); +#275971 = FACE_BOUND('',#275972,.T.); +#275972 = EDGE_LOOP('',(#275973,#275974,#275982,#275990)); +#275973 = ORIENTED_EDGE('',*,*,#275952,.T.); +#275974 = ORIENTED_EDGE('',*,*,#275975,.T.); +#275975 = EDGE_CURVE('',#275945,#275976,#275978,.T.); +#275976 = VERTEX_POINT('',#275977); +#275977 = CARTESIAN_POINT('',(135.385195,-87.722836,1.545)); +#275978 = LINE('',#275979,#275980); +#275979 = CARTESIAN_POINT('',(135.371921,-87.730499,1.545)); +#275980 = VECTOR('',#275981,1.); +#275981 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#275982 = ORIENTED_EDGE('',*,*,#275983,.F.); +#275983 = EDGE_CURVE('',#275984,#275976,#275986,.T.); +#275984 = VERTEX_POINT('',#275985); +#275985 = CARTESIAN_POINT('',(135.385195,-87.722836,1.51)); +#275986 = LINE('',#275987,#275988); +#275987 = CARTESIAN_POINT('',(135.385195,-87.722836,1.51)); +#275988 = VECTOR('',#275989,1.); +#275989 = DIRECTION('',(0.,0.,1.)); +#275990 = ORIENTED_EDGE('',*,*,#275991,.F.); +#275991 = EDGE_CURVE('',#275953,#275984,#275992,.T.); +#275992 = LINE('',#275993,#275994); +#275993 = CARTESIAN_POINT('',(135.371921,-87.730499,1.51)); +#275994 = VECTOR('',#275995,1.); +#275995 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#275996 = PLANE('',#275997); +#275997 = AXIS2_PLACEMENT_3D('',#275998,#275999,#276000); +#275998 = CARTESIAN_POINT('',(135.371921,-87.730499,1.51)); +#275999 = DIRECTION('',(-0.499963423545,0.866046520181,0.)); +#276000 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#276001 = ADVANCED_FACE('',(#276002),#276029,.T.); +#276002 = FACE_BOUND('',#276003,.T.); +#276003 = EDGE_LOOP('',(#276004,#276005,#276014,#276022)); +#276004 = ORIENTED_EDGE('',*,*,#275983,.T.); +#276005 = ORIENTED_EDGE('',*,*,#276006,.T.); +#276006 = EDGE_CURVE('',#275976,#276007,#276009,.T.); +#276007 = VERTEX_POINT('',#276008); +#276008 = CARTESIAN_POINT('',(135.222836,-87.885195,1.545)); +#276009 = CIRCLE('',#276010,0.299999934501); +#276010 = AXIS2_PLACEMENT_3D('',#276011,#276012,#276013); +#276011 = CARTESIAN_POINT('',(135.4999998594,-87.9999998594,1.545)); +#276012 = DIRECTION('',(-0.,0.,-1.)); +#276013 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#276014 = ORIENTED_EDGE('',*,*,#276015,.F.); +#276015 = EDGE_CURVE('',#276016,#276007,#276018,.T.); +#276016 = VERTEX_POINT('',#276017); +#276017 = CARTESIAN_POINT('',(135.222836,-87.885195,1.51)); +#276018 = LINE('',#276019,#276020); +#276019 = CARTESIAN_POINT('',(135.222836,-87.885195,1.51)); +#276020 = VECTOR('',#276021,1.); +#276021 = DIRECTION('',(0.,0.,1.)); +#276022 = ORIENTED_EDGE('',*,*,#276023,.F.); +#276023 = EDGE_CURVE('',#275984,#276016,#276024,.T.); +#276024 = CIRCLE('',#276025,0.299999934501); +#276025 = AXIS2_PLACEMENT_3D('',#276026,#276027,#276028); +#276026 = CARTESIAN_POINT('',(135.4999998594,-87.9999998594,1.51)); +#276027 = DIRECTION('',(-0.,0.,-1.)); +#276028 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#276029 = CYLINDRICAL_SURFACE('',#276030,0.299999934501); +#276030 = AXIS2_PLACEMENT_3D('',#276031,#276032,#276033); +#276031 = CARTESIAN_POINT('',(135.4999998594,-87.9999998594,1.51)); +#276032 = DIRECTION('',(-0.,0.,-1.)); +#276033 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#276034 = ADVANCED_FACE('',(#276035),#276060,.T.); +#276035 = FACE_BOUND('',#276036,.T.); +#276036 = EDGE_LOOP('',(#276037,#276038,#276046,#276054)); +#276037 = ORIENTED_EDGE('',*,*,#276015,.T.); +#276038 = ORIENTED_EDGE('',*,*,#276039,.T.); +#276039 = EDGE_CURVE('',#276007,#276040,#276042,.T.); +#276040 = VERTEX_POINT('',#276041); +#276041 = CARTESIAN_POINT('',(135.230499,-87.871921,1.545)); +#276042 = LINE('',#276043,#276044); +#276043 = CARTESIAN_POINT('',(135.222836,-87.885195,1.545)); +#276044 = VECTOR('',#276045,1.); +#276045 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#276046 = ORIENTED_EDGE('',*,*,#276047,.F.); +#276047 = EDGE_CURVE('',#276048,#276040,#276050,.T.); +#276048 = VERTEX_POINT('',#276049); +#276049 = CARTESIAN_POINT('',(135.230499,-87.871921,1.51)); +#276050 = LINE('',#276051,#276052); +#276051 = CARTESIAN_POINT('',(135.230499,-87.871921,1.51)); +#276052 = VECTOR('',#276053,1.); +#276053 = DIRECTION('',(0.,0.,1.)); +#276054 = ORIENTED_EDGE('',*,*,#276055,.F.); +#276055 = EDGE_CURVE('',#276016,#276048,#276056,.T.); +#276056 = LINE('',#276057,#276058); +#276057 = CARTESIAN_POINT('',(135.222836,-87.885195,1.51)); +#276058 = VECTOR('',#276059,1.); +#276059 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#276060 = PLANE('',#276061); +#276061 = AXIS2_PLACEMENT_3D('',#276062,#276063,#276064); +#276062 = CARTESIAN_POINT('',(135.222836,-87.885195,1.51)); +#276063 = DIRECTION('',(-0.86604652018,0.499963423546,0.)); +#276064 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#276065 = ADVANCED_FACE('',(#276066),#276091,.T.); +#276066 = FACE_BOUND('',#276067,.T.); +#276067 = EDGE_LOOP('',(#276068,#276069,#276077,#276085)); +#276068 = ORIENTED_EDGE('',*,*,#276047,.T.); +#276069 = ORIENTED_EDGE('',*,*,#276070,.T.); +#276070 = EDGE_CURVE('',#276040,#276071,#276073,.T.); +#276071 = VERTEX_POINT('',#276072); +#276072 = CARTESIAN_POINT('',(134.916853,-87.555557,1.545)); +#276073 = LINE('',#276074,#276075); +#276074 = CARTESIAN_POINT('',(135.230499,-87.871921,1.545)); +#276075 = VECTOR('',#276076,1.); +#276076 = DIRECTION('',(-0.704049616904,0.710150784649,0.)); +#276077 = ORIENTED_EDGE('',*,*,#276078,.F.); +#276078 = EDGE_CURVE('',#276079,#276071,#276081,.T.); +#276079 = VERTEX_POINT('',#276080); +#276080 = CARTESIAN_POINT('',(134.916853,-87.555557,1.51)); +#276081 = LINE('',#276082,#276083); +#276082 = CARTESIAN_POINT('',(134.916853,-87.555557,1.51)); +#276083 = VECTOR('',#276084,1.); +#276084 = DIRECTION('',(0.,0.,1.)); +#276085 = ORIENTED_EDGE('',*,*,#276086,.F.); +#276086 = EDGE_CURVE('',#276048,#276079,#276087,.T.); +#276087 = LINE('',#276088,#276089); +#276088 = CARTESIAN_POINT('',(135.230499,-87.871921,1.51)); +#276089 = VECTOR('',#276090,1.); +#276090 = DIRECTION('',(-0.704049616904,0.710150784649,0.)); +#276091 = PLANE('',#276092); +#276092 = AXIS2_PLACEMENT_3D('',#276093,#276094,#276095); +#276093 = CARTESIAN_POINT('',(135.230499,-87.871921,1.51)); +#276094 = DIRECTION('',(-0.710150784649,-0.704049616904,0.)); +#276095 = DIRECTION('',(-0.704049616904,0.710150784649,0.)); +#276096 = ADVANCED_FACE('',(#276097),#276122,.T.); +#276097 = FACE_BOUND('',#276098,.T.); +#276098 = EDGE_LOOP('',(#276099,#276100,#276108,#276116)); +#276099 = ORIENTED_EDGE('',*,*,#276078,.T.); +#276100 = ORIENTED_EDGE('',*,*,#276101,.T.); +#276101 = EDGE_CURVE('',#276071,#276102,#276104,.T.); +#276102 = VERTEX_POINT('',#276103); +#276103 = CARTESIAN_POINT('',(134.901921,-87.519509,1.545)); +#276104 = LINE('',#276105,#276106); +#276105 = CARTESIAN_POINT('',(134.916853,-87.555557,1.545)); +#276106 = VECTOR('',#276107,1.); +#276107 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276108 = ORIENTED_EDGE('',*,*,#276109,.F.); +#276109 = EDGE_CURVE('',#276110,#276102,#276112,.T.); +#276110 = VERTEX_POINT('',#276111); +#276111 = CARTESIAN_POINT('',(134.901921,-87.519509,1.51)); +#276112 = LINE('',#276113,#276114); +#276113 = CARTESIAN_POINT('',(134.901921,-87.519509,1.51)); +#276114 = VECTOR('',#276115,1.); +#276115 = DIRECTION('',(0.,0.,1.)); +#276116 = ORIENTED_EDGE('',*,*,#276117,.F.); +#276117 = EDGE_CURVE('',#276079,#276110,#276118,.T.); +#276118 = LINE('',#276119,#276120); +#276119 = CARTESIAN_POINT('',(134.916853,-87.555557,1.51)); +#276120 = VECTOR('',#276121,1.); +#276121 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276122 = PLANE('',#276123); +#276123 = AXIS2_PLACEMENT_3D('',#276124,#276125,#276126); +#276124 = CARTESIAN_POINT('',(134.916853,-87.555557,1.51)); +#276125 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#276126 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276127 = ADVANCED_FACE('',(#276128),#276153,.T.); +#276128 = FACE_BOUND('',#276129,.T.); +#276129 = EDGE_LOOP('',(#276130,#276131,#276139,#276147)); +#276130 = ORIENTED_EDGE('',*,*,#276109,.T.); +#276131 = ORIENTED_EDGE('',*,*,#276132,.T.); +#276132 = EDGE_CURVE('',#276102,#276133,#276135,.T.); +#276133 = VERTEX_POINT('',#276134); +#276134 = CARTESIAN_POINT('',(134.901921,-87.019648,1.545)); +#276135 = LINE('',#276136,#276137); +#276136 = CARTESIAN_POINT('',(134.901921,-87.519509,1.545)); +#276137 = VECTOR('',#276138,1.); +#276138 = DIRECTION('',(0.,1.,0.)); +#276139 = ORIENTED_EDGE('',*,*,#276140,.F.); +#276140 = EDGE_CURVE('',#276141,#276133,#276143,.T.); +#276141 = VERTEX_POINT('',#276142); +#276142 = CARTESIAN_POINT('',(134.901921,-87.019648,1.51)); +#276143 = LINE('',#276144,#276145); +#276144 = CARTESIAN_POINT('',(134.901921,-87.019648,1.51)); +#276145 = VECTOR('',#276146,1.); +#276146 = DIRECTION('',(0.,0.,1.)); +#276147 = ORIENTED_EDGE('',*,*,#276148,.F.); +#276148 = EDGE_CURVE('',#276110,#276141,#276149,.T.); +#276149 = LINE('',#276150,#276151); +#276150 = CARTESIAN_POINT('',(134.901921,-87.519509,1.51)); +#276151 = VECTOR('',#276152,1.); +#276152 = DIRECTION('',(0.,1.,0.)); +#276153 = PLANE('',#276154); +#276154 = AXIS2_PLACEMENT_3D('',#276155,#276156,#276157); +#276155 = CARTESIAN_POINT('',(134.901921,-87.519509,1.51)); +#276156 = DIRECTION('',(-1.,0.,0.)); +#276157 = DIRECTION('',(0.,1.,0.)); +#276158 = ADVANCED_FACE('',(#276159),#276184,.T.); +#276159 = FACE_BOUND('',#276160,.T.); +#276160 = EDGE_LOOP('',(#276161,#276162,#276170,#276178)); +#276161 = ORIENTED_EDGE('',*,*,#276140,.T.); +#276162 = ORIENTED_EDGE('',*,*,#276163,.T.); +#276163 = EDGE_CURVE('',#276133,#276164,#276166,.T.); +#276164 = VERTEX_POINT('',#276165); +#276165 = CARTESIAN_POINT('',(134.93352,-87.028116,1.545)); +#276166 = LINE('',#276167,#276168); +#276167 = CARTESIAN_POINT('',(134.901921,-87.019648,1.545)); +#276168 = VECTOR('',#276169,1.); +#276169 = DIRECTION('',(0.965917622364,-0.258849660628,0.)); +#276170 = ORIENTED_EDGE('',*,*,#276171,.F.); +#276171 = EDGE_CURVE('',#276172,#276164,#276174,.T.); +#276172 = VERTEX_POINT('',#276173); +#276173 = CARTESIAN_POINT('',(134.93352,-87.028116,1.51)); +#276174 = LINE('',#276175,#276176); +#276175 = CARTESIAN_POINT('',(134.93352,-87.028116,1.51)); +#276176 = VECTOR('',#276177,1.); +#276177 = DIRECTION('',(0.,0.,1.)); +#276178 = ORIENTED_EDGE('',*,*,#276179,.F.); +#276179 = EDGE_CURVE('',#276141,#276172,#276180,.T.); +#276180 = LINE('',#276181,#276182); +#276181 = CARTESIAN_POINT('',(134.901921,-87.019648,1.51)); +#276182 = VECTOR('',#276183,1.); +#276183 = DIRECTION('',(0.965917622364,-0.258849660628,0.)); +#276184 = PLANE('',#276185); +#276185 = AXIS2_PLACEMENT_3D('',#276186,#276187,#276188); +#276186 = CARTESIAN_POINT('',(134.901921,-87.019648,1.51)); +#276187 = DIRECTION('',(0.258849660628,0.965917622364,-0.)); +#276188 = DIRECTION('',(0.965917622364,-0.258849660628,0.)); +#276189 = ADVANCED_FACE('',(#276190),#276206,.T.); +#276190 = FACE_BOUND('',#276191,.T.); +#276191 = EDGE_LOOP('',(#276192,#276193,#276199,#276200)); +#276192 = ORIENTED_EDGE('',*,*,#276171,.T.); +#276193 = ORIENTED_EDGE('',*,*,#276194,.T.); +#276194 = EDGE_CURVE('',#276164,#275844,#276195,.T.); +#276195 = LINE('',#276196,#276197); +#276196 = CARTESIAN_POINT('',(134.93352,-87.028116,1.545)); +#276197 = VECTOR('',#276198,1.); +#276198 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#276199 = ORIENTED_EDGE('',*,*,#275841,.F.); +#276200 = ORIENTED_EDGE('',*,*,#276201,.F.); +#276201 = EDGE_CURVE('',#276172,#275842,#276202,.T.); +#276202 = LINE('',#276203,#276204); +#276203 = CARTESIAN_POINT('',(134.93352,-87.028116,1.51)); +#276204 = VECTOR('',#276205,1.); +#276205 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#276206 = PLANE('',#276207); +#276207 = AXIS2_PLACEMENT_3D('',#276208,#276209,#276210); +#276208 = CARTESIAN_POINT('',(134.93352,-87.028116,1.51)); +#276209 = DIRECTION('',(6.539820599336E-02,0.997859245912,-0.)); +#276210 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#276211 = ADVANCED_FACE('',(#276212),#276239,.F.); +#276212 = FACE_BOUND('',#276213,.T.); +#276213 = EDGE_LOOP('',(#276214,#276224,#276231,#276232)); +#276214 = ORIENTED_EDGE('',*,*,#276215,.T.); +#276215 = EDGE_CURVE('',#276216,#276218,#276220,.T.); +#276216 = VERTEX_POINT('',#276217); +#276217 = CARTESIAN_POINT('',(135.637255,-88.,1.51)); +#276218 = VERTEX_POINT('',#276219); +#276219 = CARTESIAN_POINT('',(135.637255,-88.,1.545)); +#276220 = LINE('',#276221,#276222); +#276221 = CARTESIAN_POINT('',(135.637255,-88.,1.51)); +#276222 = VECTOR('',#276223,1.); +#276223 = DIRECTION('',(0.,0.,1.)); +#276224 = ORIENTED_EDGE('',*,*,#276225,.T.); +#276225 = EDGE_CURVE('',#276218,#276218,#276226,.T.); +#276226 = CIRCLE('',#276227,0.137255); +#276227 = AXIS2_PLACEMENT_3D('',#276228,#276229,#276230); +#276228 = CARTESIAN_POINT('',(135.5,-88.,1.545)); +#276229 = DIRECTION('',(0.,0.,1.)); +#276230 = DIRECTION('',(1.,0.,-0.)); +#276231 = ORIENTED_EDGE('',*,*,#276215,.F.); +#276232 = ORIENTED_EDGE('',*,*,#276233,.F.); +#276233 = EDGE_CURVE('',#276216,#276216,#276234,.T.); +#276234 = CIRCLE('',#276235,0.137255); +#276235 = AXIS2_PLACEMENT_3D('',#276236,#276237,#276238); +#276236 = CARTESIAN_POINT('',(135.5,-88.,1.51)); +#276237 = DIRECTION('',(0.,0.,1.)); +#276238 = DIRECTION('',(1.,0.,-0.)); +#276239 = CYLINDRICAL_SURFACE('',#276240,0.137255); +#276240 = AXIS2_PLACEMENT_3D('',#276241,#276242,#276243); +#276241 = CARTESIAN_POINT('',(135.5,-88.,1.51)); +#276242 = DIRECTION('',(-0.,-0.,-1.)); +#276243 = DIRECTION('',(1.,0.,-0.)); +#276244 = ADVANCED_FACE('',(#276245,#276259),#276262,.F.); +#276245 = FACE_BOUND('',#276246,.T.); +#276246 = EDGE_LOOP('',(#276247,#276248,#276249,#276250,#276251,#276252, + #276253,#276254,#276255,#276256,#276257,#276258)); +#276247 = ORIENTED_EDGE('',*,*,#275867,.T.); +#276248 = ORIENTED_EDGE('',*,*,#275898,.T.); +#276249 = ORIENTED_EDGE('',*,*,#275929,.T.); +#276250 = ORIENTED_EDGE('',*,*,#275960,.T.); +#276251 = ORIENTED_EDGE('',*,*,#275991,.T.); +#276252 = ORIENTED_EDGE('',*,*,#276023,.T.); +#276253 = ORIENTED_EDGE('',*,*,#276055,.T.); +#276254 = ORIENTED_EDGE('',*,*,#276086,.T.); +#276255 = ORIENTED_EDGE('',*,*,#276117,.T.); +#276256 = ORIENTED_EDGE('',*,*,#276148,.T.); +#276257 = ORIENTED_EDGE('',*,*,#276179,.T.); +#276258 = ORIENTED_EDGE('',*,*,#276201,.T.); +#276259 = FACE_BOUND('',#276260,.T.); +#276260 = EDGE_LOOP('',(#276261)); +#276261 = ORIENTED_EDGE('',*,*,#276233,.T.); +#276262 = PLANE('',#276263); +#276263 = AXIS2_PLACEMENT_3D('',#276264,#276265,#276266); +#276264 = CARTESIAN_POINT('',(0.,0.,1.51)); +#276265 = DIRECTION('',(0.,0.,1.)); +#276266 = DIRECTION('',(1.,0.,-0.)); +#276267 = ADVANCED_FACE('',(#276268,#276282),#276285,.T.); +#276268 = FACE_BOUND('',#276269,.F.); +#276269 = EDGE_LOOP('',(#276270,#276271,#276272,#276273,#276274,#276275, + #276276,#276277,#276278,#276279,#276280,#276281)); +#276270 = ORIENTED_EDGE('',*,*,#275851,.T.); +#276271 = ORIENTED_EDGE('',*,*,#275882,.T.); +#276272 = ORIENTED_EDGE('',*,*,#275913,.T.); +#276273 = ORIENTED_EDGE('',*,*,#275944,.T.); +#276274 = ORIENTED_EDGE('',*,*,#275975,.T.); +#276275 = ORIENTED_EDGE('',*,*,#276006,.T.); +#276276 = ORIENTED_EDGE('',*,*,#276039,.T.); +#276277 = ORIENTED_EDGE('',*,*,#276070,.T.); +#276278 = ORIENTED_EDGE('',*,*,#276101,.T.); +#276279 = ORIENTED_EDGE('',*,*,#276132,.T.); +#276280 = ORIENTED_EDGE('',*,*,#276163,.T.); +#276281 = ORIENTED_EDGE('',*,*,#276194,.T.); +#276282 = FACE_BOUND('',#276283,.F.); +#276283 = EDGE_LOOP('',(#276284)); +#276284 = ORIENTED_EDGE('',*,*,#276225,.T.); +#276285 = PLANE('',#276286); +#276286 = AXIS2_PLACEMENT_3D('',#276287,#276288,#276289); +#276287 = CARTESIAN_POINT('',(0.,0.,1.545)); +#276288 = DIRECTION('',(0.,0.,1.)); +#276289 = DIRECTION('',(1.,0.,-0.)); +#276290 = MANIFOLD_SOLID_BREP('',#276291); +#276291 = CLOSED_SHELL('',(#276292,#276334,#276365,#276396,#276427, + #276458,#276489,#276520,#276551,#276582,#276613,#276646,#276677, + #276708,#276739,#276770,#276801,#276834,#276865,#276896,#276927, + #276958,#276989,#277011,#277044,#277078)); +#276292 = ADVANCED_FACE('',(#276293),#276329,.T.); +#276293 = FACE_BOUND('',#276294,.T.); +#276294 = EDGE_LOOP('',(#276295,#276305,#276314,#276322)); +#276295 = ORIENTED_EDGE('',*,*,#276296,.T.); +#276296 = EDGE_CURVE('',#276297,#276299,#276301,.T.); +#276297 = VERTEX_POINT('',#276298); +#276298 = CARTESIAN_POINT('',(124.544443,-82.716853,1.51)); +#276299 = VERTEX_POINT('',#276300); +#276300 = CARTESIAN_POINT('',(124.544443,-82.716853,1.545)); +#276301 = LINE('',#276302,#276303); +#276302 = CARTESIAN_POINT('',(124.544443,-82.716853,1.51)); +#276303 = VECTOR('',#276304,1.); +#276304 = DIRECTION('',(0.,0.,1.)); +#276305 = ORIENTED_EDGE('',*,*,#276306,.T.); +#276306 = EDGE_CURVE('',#276299,#276307,#276309,.T.); +#276307 = VERTEX_POINT('',#276308); +#276308 = CARTESIAN_POINT('',(124.698079,-82.780491,1.545)); +#276309 = CIRCLE('',#276310,0.100000590676); +#276310 = AXIS2_PLACEMENT_3D('',#276311,#276312,#276313); +#276311 = CARTESIAN_POINT('',(124.6,-82.80000068719,1.545)); +#276312 = DIRECTION('',(0.,0.,-1.)); +#276313 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#276314 = ORIENTED_EDGE('',*,*,#276315,.F.); +#276315 = EDGE_CURVE('',#276316,#276307,#276318,.T.); +#276316 = VERTEX_POINT('',#276317); +#276317 = CARTESIAN_POINT('',(124.698079,-82.780491,1.51)); +#276318 = LINE('',#276319,#276320); +#276319 = CARTESIAN_POINT('',(124.698079,-82.780491,1.51)); +#276320 = VECTOR('',#276321,1.); +#276321 = DIRECTION('',(0.,0.,1.)); +#276322 = ORIENTED_EDGE('',*,*,#276323,.F.); +#276323 = EDGE_CURVE('',#276297,#276316,#276324,.T.); +#276324 = CIRCLE('',#276325,0.100000590676); +#276325 = AXIS2_PLACEMENT_3D('',#276326,#276327,#276328); +#276326 = CARTESIAN_POINT('',(124.6,-82.80000068719,1.51)); +#276327 = DIRECTION('',(0.,0.,-1.)); +#276328 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#276329 = CYLINDRICAL_SURFACE('',#276330,0.100000590676); +#276330 = AXIS2_PLACEMENT_3D('',#276331,#276332,#276333); +#276331 = CARTESIAN_POINT('',(124.6,-82.80000068719,1.51)); +#276332 = DIRECTION('',(0.,0.,-1.)); +#276333 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#276334 = ADVANCED_FACE('',(#276335),#276360,.T.); +#276335 = FACE_BOUND('',#276336,.T.); +#276336 = EDGE_LOOP('',(#276337,#276338,#276346,#276354)); +#276337 = ORIENTED_EDGE('',*,*,#276315,.T.); +#276338 = ORIENTED_EDGE('',*,*,#276339,.T.); +#276339 = EDGE_CURVE('',#276307,#276340,#276342,.T.); +#276340 = VERTEX_POINT('',#276341); +#276341 = CARTESIAN_POINT('',(124.7,-84.383578,1.545)); +#276342 = LINE('',#276343,#276344); +#276343 = CARTESIAN_POINT('',(124.698079,-82.780491,1.545)); +#276344 = VECTOR('',#276345,1.); +#276345 = DIRECTION('',(1.198312144483E-03,-0.999999282024,0.)); +#276346 = ORIENTED_EDGE('',*,*,#276347,.F.); +#276347 = EDGE_CURVE('',#276348,#276340,#276350,.T.); +#276348 = VERTEX_POINT('',#276349); +#276349 = CARTESIAN_POINT('',(124.7,-84.383578,1.51)); +#276350 = LINE('',#276351,#276352); +#276351 = CARTESIAN_POINT('',(124.7,-84.383578,1.51)); +#276352 = VECTOR('',#276353,1.); +#276353 = DIRECTION('',(0.,0.,1.)); +#276354 = ORIENTED_EDGE('',*,*,#276355,.F.); +#276355 = EDGE_CURVE('',#276316,#276348,#276356,.T.); +#276356 = LINE('',#276357,#276358); +#276357 = CARTESIAN_POINT('',(124.698079,-82.780491,1.51)); +#276358 = VECTOR('',#276359,1.); +#276359 = DIRECTION('',(1.198312144483E-03,-0.999999282024,0.)); +#276360 = PLANE('',#276361); +#276361 = AXIS2_PLACEMENT_3D('',#276362,#276363,#276364); +#276362 = CARTESIAN_POINT('',(124.698079,-82.780491,1.51)); +#276363 = DIRECTION('',(0.999999282024,1.198312144483E-03,-0.)); +#276364 = DIRECTION('',(1.198312144483E-03,-0.999999282024,0.)); +#276365 = ADVANCED_FACE('',(#276366),#276391,.T.); +#276366 = FACE_BOUND('',#276367,.T.); +#276367 = EDGE_LOOP('',(#276368,#276369,#276377,#276385)); +#276368 = ORIENTED_EDGE('',*,*,#276347,.T.); +#276369 = ORIENTED_EDGE('',*,*,#276370,.T.); +#276370 = EDGE_CURVE('',#276340,#276371,#276373,.T.); +#276371 = VERTEX_POINT('',#276372); +#276372 = CARTESIAN_POINT('',(124.883147,-84.569443,1.545)); +#276373 = LINE('',#276374,#276375); +#276374 = CARTESIAN_POINT('',(124.7,-84.383578,1.545)); +#276375 = VECTOR('',#276376,1.); +#276376 = DIRECTION('',(0.701879466471,-0.712295735314,0.)); +#276377 = ORIENTED_EDGE('',*,*,#276378,.F.); +#276378 = EDGE_CURVE('',#276379,#276371,#276381,.T.); +#276379 = VERTEX_POINT('',#276380); +#276380 = CARTESIAN_POINT('',(124.883147,-84.569443,1.51)); +#276381 = LINE('',#276382,#276383); +#276382 = CARTESIAN_POINT('',(124.883147,-84.569443,1.51)); +#276383 = VECTOR('',#276384,1.); +#276384 = DIRECTION('',(0.,0.,1.)); +#276385 = ORIENTED_EDGE('',*,*,#276386,.F.); +#276386 = EDGE_CURVE('',#276348,#276379,#276387,.T.); +#276387 = LINE('',#276388,#276389); +#276388 = CARTESIAN_POINT('',(124.7,-84.383578,1.51)); +#276389 = VECTOR('',#276390,1.); +#276390 = DIRECTION('',(0.701879466471,-0.712295735314,0.)); +#276391 = PLANE('',#276392); +#276392 = AXIS2_PLACEMENT_3D('',#276393,#276394,#276395); +#276393 = CARTESIAN_POINT('',(124.7,-84.383578,1.51)); +#276394 = DIRECTION('',(0.712295735314,0.701879466471,-0.)); +#276395 = DIRECTION('',(0.701879466471,-0.712295735314,0.)); +#276396 = ADVANCED_FACE('',(#276397),#276422,.T.); +#276397 = FACE_BOUND('',#276398,.T.); +#276398 = EDGE_LOOP('',(#276399,#276400,#276408,#276416)); +#276399 = ORIENTED_EDGE('',*,*,#276378,.T.); +#276400 = ORIENTED_EDGE('',*,*,#276401,.T.); +#276401 = EDGE_CURVE('',#276371,#276402,#276404,.T.); +#276402 = VERTEX_POINT('',#276403); +#276403 = CARTESIAN_POINT('',(124.898079,-84.605491,1.545)); +#276404 = LINE('',#276405,#276406); +#276405 = CARTESIAN_POINT('',(124.883147,-84.569443,1.545)); +#276406 = VECTOR('',#276407,1.); +#276407 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#276408 = ORIENTED_EDGE('',*,*,#276409,.F.); +#276409 = EDGE_CURVE('',#276410,#276402,#276412,.T.); +#276410 = VERTEX_POINT('',#276411); +#276411 = CARTESIAN_POINT('',(124.898079,-84.605491,1.51)); +#276412 = LINE('',#276413,#276414); +#276413 = CARTESIAN_POINT('',(124.898079,-84.605491,1.51)); +#276414 = VECTOR('',#276415,1.); +#276415 = DIRECTION('',(0.,0.,1.)); +#276416 = ORIENTED_EDGE('',*,*,#276417,.F.); +#276417 = EDGE_CURVE('',#276379,#276410,#276418,.T.); +#276418 = LINE('',#276419,#276420); +#276419 = CARTESIAN_POINT('',(124.883147,-84.569443,1.51)); +#276420 = VECTOR('',#276421,1.); +#276421 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#276422 = PLANE('',#276423); +#276423 = AXIS2_PLACEMENT_3D('',#276424,#276425,#276426); +#276424 = CARTESIAN_POINT('',(124.883147,-84.569443,1.51)); +#276425 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#276426 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#276427 = ADVANCED_FACE('',(#276428),#276453,.T.); +#276428 = FACE_BOUND('',#276429,.T.); +#276429 = EDGE_LOOP('',(#276430,#276431,#276439,#276447)); +#276430 = ORIENTED_EDGE('',*,*,#276409,.T.); +#276431 = ORIENTED_EDGE('',*,*,#276432,.T.); +#276432 = EDGE_CURVE('',#276402,#276433,#276435,.T.); +#276433 = VERTEX_POINT('',#276434); +#276434 = CARTESIAN_POINT('',(124.898079,-85.419509,1.545)); +#276435 = LINE('',#276436,#276437); +#276436 = CARTESIAN_POINT('',(124.898079,-84.605491,1.545)); +#276437 = VECTOR('',#276438,1.); +#276438 = DIRECTION('',(0.,-1.,0.)); +#276439 = ORIENTED_EDGE('',*,*,#276440,.F.); +#276440 = EDGE_CURVE('',#276441,#276433,#276443,.T.); +#276441 = VERTEX_POINT('',#276442); +#276442 = CARTESIAN_POINT('',(124.898079,-85.419509,1.51)); +#276443 = LINE('',#276444,#276445); +#276444 = CARTESIAN_POINT('',(124.898079,-85.419509,1.51)); +#276445 = VECTOR('',#276446,1.); +#276446 = DIRECTION('',(0.,0.,1.)); +#276447 = ORIENTED_EDGE('',*,*,#276448,.F.); +#276448 = EDGE_CURVE('',#276410,#276441,#276449,.T.); +#276449 = LINE('',#276450,#276451); +#276450 = CARTESIAN_POINT('',(124.898079,-84.605491,1.51)); +#276451 = VECTOR('',#276452,1.); +#276452 = DIRECTION('',(0.,-1.,0.)); +#276453 = PLANE('',#276454); +#276454 = AXIS2_PLACEMENT_3D('',#276455,#276456,#276457); +#276455 = CARTESIAN_POINT('',(124.898079,-84.605491,1.51)); +#276456 = DIRECTION('',(1.,0.,-0.)); +#276457 = DIRECTION('',(0.,-1.,0.)); +#276458 = ADVANCED_FACE('',(#276459),#276484,.T.); +#276459 = FACE_BOUND('',#276460,.T.); +#276460 = EDGE_LOOP('',(#276461,#276462,#276470,#276478)); +#276461 = ORIENTED_EDGE('',*,*,#276440,.T.); +#276462 = ORIENTED_EDGE('',*,*,#276463,.T.); +#276463 = EDGE_CURVE('',#276433,#276464,#276466,.T.); +#276464 = VERTEX_POINT('',#276465); +#276465 = CARTESIAN_POINT('',(124.883147,-85.455558,1.545)); +#276466 = LINE('',#276467,#276468); +#276467 = CARTESIAN_POINT('',(124.898079,-85.419509,1.545)); +#276468 = VECTOR('',#276469,1.); +#276469 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#276470 = ORIENTED_EDGE('',*,*,#276471,.F.); +#276471 = EDGE_CURVE('',#276472,#276464,#276474,.T.); +#276472 = VERTEX_POINT('',#276473); +#276473 = CARTESIAN_POINT('',(124.883147,-85.455558,1.51)); +#276474 = LINE('',#276475,#276476); +#276475 = CARTESIAN_POINT('',(124.883147,-85.455558,1.51)); +#276476 = VECTOR('',#276477,1.); +#276477 = DIRECTION('',(0.,0.,1.)); +#276478 = ORIENTED_EDGE('',*,*,#276479,.F.); +#276479 = EDGE_CURVE('',#276441,#276472,#276480,.T.); +#276480 = LINE('',#276481,#276482); +#276481 = CARTESIAN_POINT('',(124.898079,-85.419509,1.51)); +#276482 = VECTOR('',#276483,1.); +#276483 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#276484 = PLANE('',#276485); +#276485 = AXIS2_PLACEMENT_3D('',#276486,#276487,#276488); +#276486 = CARTESIAN_POINT('',(124.898079,-85.419509,1.51)); +#276487 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#276488 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#276489 = ADVANCED_FACE('',(#276490),#276515,.T.); +#276490 = FACE_BOUND('',#276491,.T.); +#276491 = EDGE_LOOP('',(#276492,#276493,#276501,#276509)); +#276492 = ORIENTED_EDGE('',*,*,#276471,.T.); +#276493 = ORIENTED_EDGE('',*,*,#276494,.T.); +#276494 = EDGE_CURVE('',#276464,#276495,#276497,.T.); +#276495 = VERTEX_POINT('',#276496); +#276496 = CARTESIAN_POINT('',(123.955557,-86.383147,1.545)); +#276497 = LINE('',#276498,#276499); +#276498 = CARTESIAN_POINT('',(124.883147,-85.455558,1.545)); +#276499 = VECTOR('',#276500,1.); +#276500 = DIRECTION('',(-0.707107162339,-0.707106400034,0.)); +#276501 = ORIENTED_EDGE('',*,*,#276502,.F.); +#276502 = EDGE_CURVE('',#276503,#276495,#276505,.T.); +#276503 = VERTEX_POINT('',#276504); +#276504 = CARTESIAN_POINT('',(123.955557,-86.383147,1.51)); +#276505 = LINE('',#276506,#276507); +#276506 = CARTESIAN_POINT('',(123.955557,-86.383147,1.51)); +#276507 = VECTOR('',#276508,1.); +#276508 = DIRECTION('',(0.,0.,1.)); +#276509 = ORIENTED_EDGE('',*,*,#276510,.F.); +#276510 = EDGE_CURVE('',#276472,#276503,#276511,.T.); +#276511 = LINE('',#276512,#276513); +#276512 = CARTESIAN_POINT('',(124.883147,-85.455558,1.51)); +#276513 = VECTOR('',#276514,1.); +#276514 = DIRECTION('',(-0.707107162339,-0.707106400034,0.)); +#276515 = PLANE('',#276516); +#276516 = AXIS2_PLACEMENT_3D('',#276517,#276518,#276519); +#276517 = CARTESIAN_POINT('',(124.883147,-85.455558,1.51)); +#276518 = DIRECTION('',(0.707106400034,-0.707107162339,0.)); +#276519 = DIRECTION('',(-0.707107162339,-0.707106400034,0.)); +#276520 = ADVANCED_FACE('',(#276521),#276546,.T.); +#276521 = FACE_BOUND('',#276522,.T.); +#276522 = EDGE_LOOP('',(#276523,#276524,#276532,#276540)); +#276523 = ORIENTED_EDGE('',*,*,#276502,.T.); +#276524 = ORIENTED_EDGE('',*,*,#276525,.T.); +#276525 = EDGE_CURVE('',#276495,#276526,#276528,.T.); +#276526 = VERTEX_POINT('',#276527); +#276527 = CARTESIAN_POINT('',(123.919509,-86.398079,1.545)); +#276528 = LINE('',#276529,#276530); +#276529 = CARTESIAN_POINT('',(123.955557,-86.383147,1.545)); +#276530 = VECTOR('',#276531,1.); +#276531 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#276532 = ORIENTED_EDGE('',*,*,#276533,.F.); +#276533 = EDGE_CURVE('',#276534,#276526,#276536,.T.); +#276534 = VERTEX_POINT('',#276535); +#276535 = CARTESIAN_POINT('',(123.919509,-86.398079,1.51)); +#276536 = LINE('',#276537,#276538); +#276537 = CARTESIAN_POINT('',(123.919509,-86.398079,1.51)); +#276538 = VECTOR('',#276539,1.); +#276539 = DIRECTION('',(0.,0.,1.)); +#276540 = ORIENTED_EDGE('',*,*,#276541,.F.); +#276541 = EDGE_CURVE('',#276503,#276534,#276542,.T.); +#276542 = LINE('',#276543,#276544); +#276543 = CARTESIAN_POINT('',(123.955557,-86.383147,1.51)); +#276544 = VECTOR('',#276545,1.); +#276545 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#276546 = PLANE('',#276547); +#276547 = AXIS2_PLACEMENT_3D('',#276548,#276549,#276550); +#276548 = CARTESIAN_POINT('',(123.955557,-86.383147,1.51)); +#276549 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#276550 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#276551 = ADVANCED_FACE('',(#276552),#276577,.T.); +#276552 = FACE_BOUND('',#276553,.T.); +#276553 = EDGE_LOOP('',(#276554,#276555,#276563,#276571)); +#276554 = ORIENTED_EDGE('',*,*,#276533,.T.); +#276555 = ORIENTED_EDGE('',*,*,#276556,.T.); +#276556 = EDGE_CURVE('',#276526,#276557,#276559,.T.); +#276557 = VERTEX_POINT('',#276558); +#276558 = CARTESIAN_POINT('',(122.881131,-86.4,1.545)); +#276559 = LINE('',#276560,#276561); +#276560 = CARTESIAN_POINT('',(123.919509,-86.398079,1.545)); +#276561 = VECTOR('',#276562,1.); +#276562 = DIRECTION('',(-0.999998288753,-1.84999750833E-03,0.)); +#276563 = ORIENTED_EDGE('',*,*,#276564,.F.); +#276564 = EDGE_CURVE('',#276565,#276557,#276567,.T.); +#276565 = VERTEX_POINT('',#276566); +#276566 = CARTESIAN_POINT('',(122.881131,-86.4,1.51)); +#276567 = LINE('',#276568,#276569); +#276568 = CARTESIAN_POINT('',(122.881131,-86.4,1.51)); +#276569 = VECTOR('',#276570,1.); +#276570 = DIRECTION('',(0.,0.,1.)); +#276571 = ORIENTED_EDGE('',*,*,#276572,.F.); +#276572 = EDGE_CURVE('',#276534,#276565,#276573,.T.); +#276573 = LINE('',#276574,#276575); +#276574 = CARTESIAN_POINT('',(123.919509,-86.398079,1.51)); +#276575 = VECTOR('',#276576,1.); +#276576 = DIRECTION('',(-0.999998288753,-1.84999750833E-03,0.)); +#276577 = PLANE('',#276578); +#276578 = AXIS2_PLACEMENT_3D('',#276579,#276580,#276581); +#276579 = CARTESIAN_POINT('',(123.919509,-86.398079,1.51)); +#276580 = DIRECTION('',(1.84999750833E-03,-0.999998288753,0.)); +#276581 = DIRECTION('',(-0.999998288753,-1.84999750833E-03,0.)); +#276582 = ADVANCED_FACE('',(#276583),#276608,.T.); +#276583 = FACE_BOUND('',#276584,.T.); +#276584 = EDGE_LOOP('',(#276585,#276586,#276594,#276602)); +#276585 = ORIENTED_EDGE('',*,*,#276564,.T.); +#276586 = ORIENTED_EDGE('',*,*,#276587,.T.); +#276587 = EDGE_CURVE('',#276557,#276588,#276590,.T.); +#276588 = VERTEX_POINT('',#276589); +#276589 = CARTESIAN_POINT('',(122.877164,-86.414805,1.545)); +#276590 = LINE('',#276591,#276592); +#276591 = CARTESIAN_POINT('',(122.881131,-86.4,1.545)); +#276592 = VECTOR('',#276593,1.); +#276593 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#276594 = ORIENTED_EDGE('',*,*,#276595,.F.); +#276595 = EDGE_CURVE('',#276596,#276588,#276598,.T.); +#276596 = VERTEX_POINT('',#276597); +#276597 = CARTESIAN_POINT('',(122.877164,-86.414805,1.51)); +#276598 = LINE('',#276599,#276600); +#276599 = CARTESIAN_POINT('',(122.877164,-86.414805,1.51)); +#276600 = VECTOR('',#276601,1.); +#276601 = DIRECTION('',(0.,0.,1.)); +#276602 = ORIENTED_EDGE('',*,*,#276603,.F.); +#276603 = EDGE_CURVE('',#276565,#276596,#276604,.T.); +#276604 = LINE('',#276605,#276606); +#276605 = CARTESIAN_POINT('',(122.881131,-86.4,1.51)); +#276606 = VECTOR('',#276607,1.); +#276607 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#276608 = PLANE('',#276609); +#276609 = AXIS2_PLACEMENT_3D('',#276610,#276611,#276612); +#276610 = CARTESIAN_POINT('',(122.881131,-86.4,1.51)); +#276611 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#276612 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#276613 = ADVANCED_FACE('',(#276614),#276641,.T.); +#276614 = FACE_BOUND('',#276615,.T.); +#276615 = EDGE_LOOP('',(#276616,#276617,#276626,#276634)); +#276616 = ORIENTED_EDGE('',*,*,#276595,.T.); +#276617 = ORIENTED_EDGE('',*,*,#276618,.T.); +#276618 = EDGE_CURVE('',#276588,#276619,#276621,.T.); +#276619 = VERTEX_POINT('',#276620); +#276620 = CARTESIAN_POINT('',(122.877164,-86.185195,1.545)); +#276621 = CIRCLE('',#276622,0.299999850918); +#276622 = AXIS2_PLACEMENT_3D('',#276623,#276624,#276625); +#276623 = CARTESIAN_POINT('',(122.6000002893,-86.3,1.545)); +#276624 = DIRECTION('',(0.,0.,-1.)); +#276625 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#276626 = ORIENTED_EDGE('',*,*,#276627,.F.); +#276627 = EDGE_CURVE('',#276628,#276619,#276630,.T.); +#276628 = VERTEX_POINT('',#276629); +#276629 = CARTESIAN_POINT('',(122.877164,-86.185195,1.51)); +#276630 = LINE('',#276631,#276632); +#276631 = CARTESIAN_POINT('',(122.877164,-86.185195,1.51)); +#276632 = VECTOR('',#276633,1.); +#276633 = DIRECTION('',(0.,0.,1.)); +#276634 = ORIENTED_EDGE('',*,*,#276635,.F.); +#276635 = EDGE_CURVE('',#276596,#276628,#276636,.T.); +#276636 = CIRCLE('',#276637,0.299999850918); +#276637 = AXIS2_PLACEMENT_3D('',#276638,#276639,#276640); +#276638 = CARTESIAN_POINT('',(122.6000002893,-86.3,1.51)); +#276639 = DIRECTION('',(0.,0.,-1.)); +#276640 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#276641 = CYLINDRICAL_SURFACE('',#276642,0.299999850918); +#276642 = AXIS2_PLACEMENT_3D('',#276643,#276644,#276645); +#276643 = CARTESIAN_POINT('',(122.6000002893,-86.3,1.51)); +#276644 = DIRECTION('',(0.,0.,-1.)); +#276645 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#276646 = ADVANCED_FACE('',(#276647),#276672,.T.); +#276647 = FACE_BOUND('',#276648,.T.); +#276648 = EDGE_LOOP('',(#276649,#276650,#276658,#276666)); +#276649 = ORIENTED_EDGE('',*,*,#276627,.T.); +#276650 = ORIENTED_EDGE('',*,*,#276651,.T.); +#276651 = EDGE_CURVE('',#276619,#276652,#276654,.T.); +#276652 = VERTEX_POINT('',#276653); +#276653 = CARTESIAN_POINT('',(122.881131,-86.2,1.545)); +#276654 = LINE('',#276655,#276656); +#276655 = CARTESIAN_POINT('',(122.877164,-86.185195,1.545)); +#276656 = VECTOR('',#276657,1.); +#276657 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#276658 = ORIENTED_EDGE('',*,*,#276659,.F.); +#276659 = EDGE_CURVE('',#276660,#276652,#276662,.T.); +#276660 = VERTEX_POINT('',#276661); +#276661 = CARTESIAN_POINT('',(122.881131,-86.2,1.51)); +#276662 = LINE('',#276663,#276664); +#276663 = CARTESIAN_POINT('',(122.881131,-86.2,1.51)); +#276664 = VECTOR('',#276665,1.); +#276665 = DIRECTION('',(0.,0.,1.)); +#276666 = ORIENTED_EDGE('',*,*,#276667,.F.); +#276667 = EDGE_CURVE('',#276628,#276660,#276668,.T.); +#276668 = LINE('',#276669,#276670); +#276669 = CARTESIAN_POINT('',(122.877164,-86.185195,1.51)); +#276670 = VECTOR('',#276671,1.); +#276671 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#276672 = PLANE('',#276673); +#276673 = AXIS2_PLACEMENT_3D('',#276674,#276675,#276676); +#276674 = CARTESIAN_POINT('',(122.877164,-86.185195,1.51)); +#276675 = DIRECTION('',(0.965925627198,0.258819788119,-0.)); +#276676 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#276677 = ADVANCED_FACE('',(#276678),#276703,.T.); +#276678 = FACE_BOUND('',#276679,.T.); +#276679 = EDGE_LOOP('',(#276680,#276681,#276689,#276697)); +#276680 = ORIENTED_EDGE('',*,*,#276659,.T.); +#276681 = ORIENTED_EDGE('',*,*,#276682,.T.); +#276682 = EDGE_CURVE('',#276652,#276683,#276685,.T.); +#276683 = VERTEX_POINT('',#276684); +#276684 = CARTESIAN_POINT('',(123.858578,-86.2,1.545)); +#276685 = LINE('',#276686,#276687); +#276686 = CARTESIAN_POINT('',(122.881131,-86.2,1.545)); +#276687 = VECTOR('',#276688,1.); +#276688 = DIRECTION('',(1.,0.,0.)); +#276689 = ORIENTED_EDGE('',*,*,#276690,.F.); +#276690 = EDGE_CURVE('',#276691,#276683,#276693,.T.); +#276691 = VERTEX_POINT('',#276692); +#276692 = CARTESIAN_POINT('',(123.858578,-86.2,1.51)); +#276693 = LINE('',#276694,#276695); +#276694 = CARTESIAN_POINT('',(123.858578,-86.2,1.51)); +#276695 = VECTOR('',#276696,1.); +#276696 = DIRECTION('',(0.,0.,1.)); +#276697 = ORIENTED_EDGE('',*,*,#276698,.F.); +#276698 = EDGE_CURVE('',#276660,#276691,#276699,.T.); +#276699 = LINE('',#276700,#276701); +#276700 = CARTESIAN_POINT('',(122.881131,-86.2,1.51)); +#276701 = VECTOR('',#276702,1.); +#276702 = DIRECTION('',(1.,0.,0.)); +#276703 = PLANE('',#276704); +#276704 = AXIS2_PLACEMENT_3D('',#276705,#276706,#276707); +#276705 = CARTESIAN_POINT('',(122.881131,-86.2,1.51)); +#276706 = DIRECTION('',(0.,1.,0.)); +#276707 = DIRECTION('',(1.,0.,0.)); +#276708 = ADVANCED_FACE('',(#276709),#276734,.T.); +#276709 = FACE_BOUND('',#276710,.T.); +#276710 = EDGE_LOOP('',(#276711,#276712,#276720,#276728)); +#276711 = ORIENTED_EDGE('',*,*,#276690,.T.); +#276712 = ORIENTED_EDGE('',*,*,#276713,.T.); +#276713 = EDGE_CURVE('',#276683,#276714,#276716,.T.); +#276714 = VERTEX_POINT('',#276715); +#276715 = CARTESIAN_POINT('',(124.7,-85.358578,1.545)); +#276716 = LINE('',#276717,#276718); +#276717 = CARTESIAN_POINT('',(123.858578,-86.2,1.545)); +#276718 = VECTOR('',#276719,1.); +#276719 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#276720 = ORIENTED_EDGE('',*,*,#276721,.F.); +#276721 = EDGE_CURVE('',#276722,#276714,#276724,.T.); +#276722 = VERTEX_POINT('',#276723); +#276723 = CARTESIAN_POINT('',(124.7,-85.358578,1.51)); +#276724 = LINE('',#276725,#276726); +#276725 = CARTESIAN_POINT('',(124.7,-85.358578,1.51)); +#276726 = VECTOR('',#276727,1.); +#276727 = DIRECTION('',(0.,0.,1.)); +#276728 = ORIENTED_EDGE('',*,*,#276729,.F.); +#276729 = EDGE_CURVE('',#276691,#276722,#276730,.T.); +#276730 = LINE('',#276731,#276732); +#276731 = CARTESIAN_POINT('',(123.858578,-86.2,1.51)); +#276732 = VECTOR('',#276733,1.); +#276733 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#276734 = PLANE('',#276735); +#276735 = AXIS2_PLACEMENT_3D('',#276736,#276737,#276738); +#276736 = CARTESIAN_POINT('',(123.858578,-86.2,1.51)); +#276737 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#276738 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#276739 = ADVANCED_FACE('',(#276740),#276765,.T.); +#276740 = FACE_BOUND('',#276741,.T.); +#276741 = EDGE_LOOP('',(#276742,#276743,#276751,#276759)); +#276742 = ORIENTED_EDGE('',*,*,#276721,.T.); +#276743 = ORIENTED_EDGE('',*,*,#276744,.T.); +#276744 = EDGE_CURVE('',#276714,#276745,#276747,.T.); +#276745 = VERTEX_POINT('',#276746); +#276746 = CARTESIAN_POINT('',(124.7,-84.860448,1.545)); +#276747 = LINE('',#276748,#276749); +#276748 = CARTESIAN_POINT('',(124.7,-85.358578,1.545)); +#276749 = VECTOR('',#276750,1.); +#276750 = DIRECTION('',(0.,1.,0.)); +#276751 = ORIENTED_EDGE('',*,*,#276752,.F.); +#276752 = EDGE_CURVE('',#276753,#276745,#276755,.T.); +#276753 = VERTEX_POINT('',#276754); +#276754 = CARTESIAN_POINT('',(124.7,-84.860448,1.51)); +#276755 = LINE('',#276756,#276757); +#276756 = CARTESIAN_POINT('',(124.7,-84.860448,1.51)); +#276757 = VECTOR('',#276758,1.); +#276758 = DIRECTION('',(0.,0.,1.)); +#276759 = ORIENTED_EDGE('',*,*,#276760,.F.); +#276760 = EDGE_CURVE('',#276722,#276753,#276761,.T.); +#276761 = LINE('',#276762,#276763); +#276762 = CARTESIAN_POINT('',(124.7,-85.358578,1.51)); +#276763 = VECTOR('',#276764,1.); +#276764 = DIRECTION('',(0.,1.,0.)); +#276765 = PLANE('',#276766); +#276766 = AXIS2_PLACEMENT_3D('',#276767,#276768,#276769); +#276767 = CARTESIAN_POINT('',(124.7,-85.358578,1.51)); +#276768 = DIRECTION('',(-1.,0.,0.)); +#276769 = DIRECTION('',(0.,1.,0.)); +#276770 = ADVANCED_FACE('',(#276771),#276796,.T.); +#276771 = FACE_BOUND('',#276772,.T.); +#276772 = EDGE_LOOP('',(#276773,#276774,#276782,#276790)); +#276773 = ORIENTED_EDGE('',*,*,#276752,.T.); +#276774 = ORIENTED_EDGE('',*,*,#276775,.T.); +#276775 = EDGE_CURVE('',#276745,#276776,#276778,.T.); +#276776 = VERTEX_POINT('',#276777); +#276777 = CARTESIAN_POINT('',(124.669509,-84.873079,1.545)); +#276778 = LINE('',#276779,#276780); +#276779 = CARTESIAN_POINT('',(124.7,-84.860448,1.545)); +#276780 = VECTOR('',#276781,1.); +#276781 = DIRECTION('',(-0.923866524062,-0.382714836031,0.)); +#276782 = ORIENTED_EDGE('',*,*,#276783,.F.); +#276783 = EDGE_CURVE('',#276784,#276776,#276786,.T.); +#276784 = VERTEX_POINT('',#276785); +#276785 = CARTESIAN_POINT('',(124.669509,-84.873079,1.51)); +#276786 = LINE('',#276787,#276788); +#276787 = CARTESIAN_POINT('',(124.669509,-84.873079,1.51)); +#276788 = VECTOR('',#276789,1.); +#276789 = DIRECTION('',(0.,0.,1.)); +#276790 = ORIENTED_EDGE('',*,*,#276791,.F.); +#276791 = EDGE_CURVE('',#276753,#276784,#276792,.T.); +#276792 = LINE('',#276793,#276794); +#276793 = CARTESIAN_POINT('',(124.7,-84.860448,1.51)); +#276794 = VECTOR('',#276795,1.); +#276795 = DIRECTION('',(-0.923866524062,-0.382714836031,0.)); +#276796 = PLANE('',#276797); +#276797 = AXIS2_PLACEMENT_3D('',#276798,#276799,#276800); +#276798 = CARTESIAN_POINT('',(124.7,-84.860448,1.51)); +#276799 = DIRECTION('',(0.382714836031,-0.923866524062,0.)); +#276800 = DIRECTION('',(-0.923866524062,-0.382714836031,0.)); +#276801 = ADVANCED_FACE('',(#276802),#276829,.T.); +#276802 = FACE_BOUND('',#276803,.T.); +#276803 = EDGE_LOOP('',(#276804,#276805,#276814,#276822)); +#276804 = ORIENTED_EDGE('',*,*,#276783,.T.); +#276805 = ORIENTED_EDGE('',*,*,#276806,.T.); +#276806 = EDGE_CURVE('',#276776,#276807,#276809,.T.); +#276807 = VERTEX_POINT('',#276808); +#276808 = CARTESIAN_POINT('',(124.566853,-84.719443,1.545)); +#276809 = CIRCLE('',#276810,0.100000373501); +#276810 = AXIS2_PLACEMENT_3D('',#276811,#276812,#276813); +#276811 = CARTESIAN_POINT('',(124.650000426,-84.775,1.545)); +#276812 = DIRECTION('',(0.,0.,-1.)); +#276813 = DIRECTION('',(0.195085011303,-0.980786336755,0.)); +#276814 = ORIENTED_EDGE('',*,*,#276815,.F.); +#276815 = EDGE_CURVE('',#276816,#276807,#276818,.T.); +#276816 = VERTEX_POINT('',#276817); +#276817 = CARTESIAN_POINT('',(124.566853,-84.719443,1.51)); +#276818 = LINE('',#276819,#276820); +#276819 = CARTESIAN_POINT('',(124.566853,-84.719443,1.51)); +#276820 = VECTOR('',#276821,1.); +#276821 = DIRECTION('',(0.,0.,1.)); +#276822 = ORIENTED_EDGE('',*,*,#276823,.F.); +#276823 = EDGE_CURVE('',#276784,#276816,#276824,.T.); +#276824 = CIRCLE('',#276825,0.100000373501); +#276825 = AXIS2_PLACEMENT_3D('',#276826,#276827,#276828); +#276826 = CARTESIAN_POINT('',(124.650000426,-84.775,1.51)); +#276827 = DIRECTION('',(0.,0.,-1.)); +#276828 = DIRECTION('',(0.195085011303,-0.980786336755,0.)); +#276829 = CYLINDRICAL_SURFACE('',#276830,0.100000373501); +#276830 = AXIS2_PLACEMENT_3D('',#276831,#276832,#276833); +#276831 = CARTESIAN_POINT('',(124.650000426,-84.775,1.51)); +#276832 = DIRECTION('',(0.,0.,-1.)); +#276833 = DIRECTION('',(0.195085011303,-0.980786336755,0.)); +#276834 = ADVANCED_FACE('',(#276835),#276860,.T.); +#276835 = FACE_BOUND('',#276836,.T.); +#276836 = EDGE_LOOP('',(#276837,#276838,#276846,#276854)); +#276837 = ORIENTED_EDGE('',*,*,#276815,.T.); +#276838 = ORIENTED_EDGE('',*,*,#276839,.T.); +#276839 = EDGE_CURVE('',#276807,#276840,#276842,.T.); +#276840 = VERTEX_POINT('',#276841); +#276841 = CARTESIAN_POINT('',(124.658578,-84.624999,1.545)); +#276842 = LINE('',#276843,#276844); +#276843 = CARTESIAN_POINT('',(124.566853,-84.719443,1.545)); +#276844 = VECTOR('',#276845,1.); +#276845 = DIRECTION('',(0.696705178142,0.717357578026,0.)); +#276846 = ORIENTED_EDGE('',*,*,#276847,.F.); +#276847 = EDGE_CURVE('',#276848,#276840,#276850,.T.); +#276848 = VERTEX_POINT('',#276849); +#276849 = CARTESIAN_POINT('',(124.658578,-84.624999,1.51)); +#276850 = LINE('',#276851,#276852); +#276851 = CARTESIAN_POINT('',(124.658578,-84.624999,1.51)); +#276852 = VECTOR('',#276853,1.); +#276853 = DIRECTION('',(0.,0.,1.)); +#276854 = ORIENTED_EDGE('',*,*,#276855,.F.); +#276855 = EDGE_CURVE('',#276816,#276848,#276856,.T.); +#276856 = LINE('',#276857,#276858); +#276857 = CARTESIAN_POINT('',(124.566853,-84.719443,1.51)); +#276858 = VECTOR('',#276859,1.); +#276859 = DIRECTION('',(0.696705178142,0.717357578026,0.)); +#276860 = PLANE('',#276861); +#276861 = AXIS2_PLACEMENT_3D('',#276862,#276863,#276864); +#276862 = CARTESIAN_POINT('',(124.566853,-84.719443,1.51)); +#276863 = DIRECTION('',(-0.717357578026,0.696705178142,0.)); +#276864 = DIRECTION('',(0.696705178142,0.717357578026,0.)); +#276865 = ADVANCED_FACE('',(#276866),#276891,.T.); +#276866 = FACE_BOUND('',#276867,.T.); +#276867 = EDGE_LOOP('',(#276868,#276869,#276877,#276885)); +#276868 = ORIENTED_EDGE('',*,*,#276847,.T.); +#276869 = ORIENTED_EDGE('',*,*,#276870,.T.); +#276870 = EDGE_CURVE('',#276840,#276871,#276873,.T.); +#276871 = VERTEX_POINT('',#276872); +#276872 = CARTESIAN_POINT('',(124.516853,-84.480557,1.545)); +#276873 = LINE('',#276874,#276875); +#276874 = CARTESIAN_POINT('',(124.658578,-84.624999,1.545)); +#276875 = VECTOR('',#276876,1.); +#276876 = DIRECTION('',(-0.70036162071,0.713788204047,0.)); +#276877 = ORIENTED_EDGE('',*,*,#276878,.F.); +#276878 = EDGE_CURVE('',#276879,#276871,#276881,.T.); +#276879 = VERTEX_POINT('',#276880); +#276880 = CARTESIAN_POINT('',(124.516853,-84.480557,1.51)); +#276881 = LINE('',#276882,#276883); +#276882 = CARTESIAN_POINT('',(124.516853,-84.480557,1.51)); +#276883 = VECTOR('',#276884,1.); +#276884 = DIRECTION('',(0.,0.,1.)); +#276885 = ORIENTED_EDGE('',*,*,#276886,.F.); +#276886 = EDGE_CURVE('',#276848,#276879,#276887,.T.); +#276887 = LINE('',#276888,#276889); +#276888 = CARTESIAN_POINT('',(124.658578,-84.624999,1.51)); +#276889 = VECTOR('',#276890,1.); +#276890 = DIRECTION('',(-0.70036162071,0.713788204047,0.)); +#276891 = PLANE('',#276892); +#276892 = AXIS2_PLACEMENT_3D('',#276893,#276894,#276895); +#276893 = CARTESIAN_POINT('',(124.658578,-84.624999,1.51)); +#276894 = DIRECTION('',(-0.713788204047,-0.70036162071,0.)); +#276895 = DIRECTION('',(-0.70036162071,0.713788204047,0.)); +#276896 = ADVANCED_FACE('',(#276897),#276922,.T.); +#276897 = FACE_BOUND('',#276898,.T.); +#276898 = EDGE_LOOP('',(#276899,#276900,#276908,#276916)); +#276899 = ORIENTED_EDGE('',*,*,#276878,.T.); +#276900 = ORIENTED_EDGE('',*,*,#276901,.T.); +#276901 = EDGE_CURVE('',#276871,#276902,#276904,.T.); +#276902 = VERTEX_POINT('',#276903); +#276903 = CARTESIAN_POINT('',(124.501921,-84.444509,1.545)); +#276904 = LINE('',#276905,#276906); +#276905 = CARTESIAN_POINT('',(124.516853,-84.480557,1.545)); +#276906 = VECTOR('',#276907,1.); +#276907 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276908 = ORIENTED_EDGE('',*,*,#276909,.F.); +#276909 = EDGE_CURVE('',#276910,#276902,#276912,.T.); +#276910 = VERTEX_POINT('',#276911); +#276911 = CARTESIAN_POINT('',(124.501921,-84.444509,1.51)); +#276912 = LINE('',#276913,#276914); +#276913 = CARTESIAN_POINT('',(124.501921,-84.444509,1.51)); +#276914 = VECTOR('',#276915,1.); +#276915 = DIRECTION('',(0.,0.,1.)); +#276916 = ORIENTED_EDGE('',*,*,#276917,.F.); +#276917 = EDGE_CURVE('',#276879,#276910,#276918,.T.); +#276918 = LINE('',#276919,#276920); +#276919 = CARTESIAN_POINT('',(124.516853,-84.480557,1.51)); +#276920 = VECTOR('',#276921,1.); +#276921 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276922 = PLANE('',#276923); +#276923 = AXIS2_PLACEMENT_3D('',#276924,#276925,#276926); +#276924 = CARTESIAN_POINT('',(124.516853,-84.480557,1.51)); +#276925 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#276926 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#276927 = ADVANCED_FACE('',(#276928),#276953,.T.); +#276928 = FACE_BOUND('',#276929,.T.); +#276929 = EDGE_LOOP('',(#276930,#276931,#276939,#276947)); +#276930 = ORIENTED_EDGE('',*,*,#276909,.T.); +#276931 = ORIENTED_EDGE('',*,*,#276932,.T.); +#276932 = EDGE_CURVE('',#276902,#276933,#276935,.T.); +#276933 = VERTEX_POINT('',#276934); +#276934 = CARTESIAN_POINT('',(124.501921,-82.780491,1.545)); +#276935 = LINE('',#276936,#276937); +#276936 = CARTESIAN_POINT('',(124.501921,-84.444509,1.545)); +#276937 = VECTOR('',#276938,1.); +#276938 = DIRECTION('',(0.,1.,0.)); +#276939 = ORIENTED_EDGE('',*,*,#276940,.F.); +#276940 = EDGE_CURVE('',#276941,#276933,#276943,.T.); +#276941 = VERTEX_POINT('',#276942); +#276942 = CARTESIAN_POINT('',(124.501921,-82.780491,1.51)); +#276943 = LINE('',#276944,#276945); +#276944 = CARTESIAN_POINT('',(124.501921,-82.780491,1.51)); +#276945 = VECTOR('',#276946,1.); +#276946 = DIRECTION('',(0.,0.,1.)); +#276947 = ORIENTED_EDGE('',*,*,#276948,.F.); +#276948 = EDGE_CURVE('',#276910,#276941,#276949,.T.); +#276949 = LINE('',#276950,#276951); +#276950 = CARTESIAN_POINT('',(124.501921,-84.444509,1.51)); +#276951 = VECTOR('',#276952,1.); +#276952 = DIRECTION('',(0.,1.,0.)); +#276953 = PLANE('',#276954); +#276954 = AXIS2_PLACEMENT_3D('',#276955,#276956,#276957); +#276955 = CARTESIAN_POINT('',(124.501921,-84.444509,1.51)); +#276956 = DIRECTION('',(-1.,0.,0.)); +#276957 = DIRECTION('',(0.,1.,0.)); +#276958 = ADVANCED_FACE('',(#276959),#276984,.T.); +#276959 = FACE_BOUND('',#276960,.T.); +#276960 = EDGE_LOOP('',(#276961,#276962,#276970,#276978)); +#276961 = ORIENTED_EDGE('',*,*,#276940,.T.); +#276962 = ORIENTED_EDGE('',*,*,#276963,.T.); +#276963 = EDGE_CURVE('',#276933,#276964,#276966,.T.); +#276964 = VERTEX_POINT('',#276965); +#276965 = CARTESIAN_POINT('',(124.516853,-82.744443,1.545)); +#276966 = LINE('',#276967,#276968); +#276967 = CARTESIAN_POINT('',(124.501921,-82.780491,1.545)); +#276968 = VECTOR('',#276969,1.); +#276969 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#276970 = ORIENTED_EDGE('',*,*,#276971,.F.); +#276971 = EDGE_CURVE('',#276972,#276964,#276974,.T.); +#276972 = VERTEX_POINT('',#276973); +#276973 = CARTESIAN_POINT('',(124.516853,-82.744443,1.51)); +#276974 = LINE('',#276975,#276976); +#276975 = CARTESIAN_POINT('',(124.516853,-82.744443,1.51)); +#276976 = VECTOR('',#276977,1.); +#276977 = DIRECTION('',(0.,0.,1.)); +#276978 = ORIENTED_EDGE('',*,*,#276979,.F.); +#276979 = EDGE_CURVE('',#276941,#276972,#276980,.T.); +#276980 = LINE('',#276981,#276982); +#276981 = CARTESIAN_POINT('',(124.501921,-82.780491,1.51)); +#276982 = VECTOR('',#276983,1.); +#276983 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#276984 = PLANE('',#276985); +#276985 = AXIS2_PLACEMENT_3D('',#276986,#276987,#276988); +#276986 = CARTESIAN_POINT('',(124.501921,-82.780491,1.51)); +#276987 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#276988 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#276989 = ADVANCED_FACE('',(#276990),#277006,.T.); +#276990 = FACE_BOUND('',#276991,.T.); +#276991 = EDGE_LOOP('',(#276992,#276993,#276999,#277000)); +#276992 = ORIENTED_EDGE('',*,*,#276971,.T.); +#276993 = ORIENTED_EDGE('',*,*,#276994,.T.); +#276994 = EDGE_CURVE('',#276964,#276299,#276995,.T.); +#276995 = LINE('',#276996,#276997); +#276996 = CARTESIAN_POINT('',(124.516853,-82.744443,1.545)); +#276997 = VECTOR('',#276998,1.); +#276998 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#276999 = ORIENTED_EDGE('',*,*,#276296,.F.); +#277000 = ORIENTED_EDGE('',*,*,#277001,.F.); +#277001 = EDGE_CURVE('',#276972,#276297,#277002,.T.); +#277002 = LINE('',#277003,#277004); +#277003 = CARTESIAN_POINT('',(124.516853,-82.744443,1.51)); +#277004 = VECTOR('',#277005,1.); +#277005 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#277006 = PLANE('',#277007); +#277007 = AXIS2_PLACEMENT_3D('',#277008,#277009,#277010); +#277008 = CARTESIAN_POINT('',(124.516853,-82.744443,1.51)); +#277009 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#277010 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#277011 = ADVANCED_FACE('',(#277012),#277039,.F.); +#277012 = FACE_BOUND('',#277013,.T.); +#277013 = EDGE_LOOP('',(#277014,#277024,#277031,#277032)); +#277014 = ORIENTED_EDGE('',*,*,#277015,.T.); +#277015 = EDGE_CURVE('',#277016,#277018,#277020,.T.); +#277016 = VERTEX_POINT('',#277017); +#277017 = CARTESIAN_POINT('',(122.737255,-86.3,1.51)); +#277018 = VERTEX_POINT('',#277019); +#277019 = CARTESIAN_POINT('',(122.737255,-86.3,1.545)); +#277020 = LINE('',#277021,#277022); +#277021 = CARTESIAN_POINT('',(122.737255,-86.3,1.51)); +#277022 = VECTOR('',#277023,1.); +#277023 = DIRECTION('',(0.,0.,1.)); +#277024 = ORIENTED_EDGE('',*,*,#277025,.T.); +#277025 = EDGE_CURVE('',#277018,#277018,#277026,.T.); +#277026 = CIRCLE('',#277027,0.137255); +#277027 = AXIS2_PLACEMENT_3D('',#277028,#277029,#277030); +#277028 = CARTESIAN_POINT('',(122.6,-86.3,1.545)); +#277029 = DIRECTION('',(0.,0.,1.)); +#277030 = DIRECTION('',(1.,0.,-0.)); +#277031 = ORIENTED_EDGE('',*,*,#277015,.F.); +#277032 = ORIENTED_EDGE('',*,*,#277033,.F.); +#277033 = EDGE_CURVE('',#277016,#277016,#277034,.T.); +#277034 = CIRCLE('',#277035,0.137255); +#277035 = AXIS2_PLACEMENT_3D('',#277036,#277037,#277038); +#277036 = CARTESIAN_POINT('',(122.6,-86.3,1.51)); +#277037 = DIRECTION('',(0.,0.,1.)); +#277038 = DIRECTION('',(1.,0.,-0.)); +#277039 = CYLINDRICAL_SURFACE('',#277040,0.137255); +#277040 = AXIS2_PLACEMENT_3D('',#277041,#277042,#277043); +#277041 = CARTESIAN_POINT('',(122.6,-86.3,1.51)); +#277042 = DIRECTION('',(-0.,-0.,-1.)); +#277043 = DIRECTION('',(1.,0.,-0.)); +#277044 = ADVANCED_FACE('',(#277045,#277070),#277073,.F.); +#277045 = FACE_BOUND('',#277046,.T.); +#277046 = EDGE_LOOP('',(#277047,#277048,#277049,#277050,#277051,#277052, + #277053,#277054,#277055,#277056,#277057,#277058,#277059,#277060, + #277061,#277062,#277063,#277064,#277065,#277066,#277067,#277068, + #277069)); +#277047 = ORIENTED_EDGE('',*,*,#276323,.T.); +#277048 = ORIENTED_EDGE('',*,*,#276355,.T.); +#277049 = ORIENTED_EDGE('',*,*,#276386,.T.); +#277050 = ORIENTED_EDGE('',*,*,#276417,.T.); +#277051 = ORIENTED_EDGE('',*,*,#276448,.T.); +#277052 = ORIENTED_EDGE('',*,*,#276479,.T.); +#277053 = ORIENTED_EDGE('',*,*,#276510,.T.); +#277054 = ORIENTED_EDGE('',*,*,#276541,.T.); +#277055 = ORIENTED_EDGE('',*,*,#276572,.T.); +#277056 = ORIENTED_EDGE('',*,*,#276603,.T.); +#277057 = ORIENTED_EDGE('',*,*,#276635,.T.); +#277058 = ORIENTED_EDGE('',*,*,#276667,.T.); +#277059 = ORIENTED_EDGE('',*,*,#276698,.T.); +#277060 = ORIENTED_EDGE('',*,*,#276729,.T.); +#277061 = ORIENTED_EDGE('',*,*,#276760,.T.); +#277062 = ORIENTED_EDGE('',*,*,#276791,.T.); +#277063 = ORIENTED_EDGE('',*,*,#276823,.T.); +#277064 = ORIENTED_EDGE('',*,*,#276855,.T.); +#277065 = ORIENTED_EDGE('',*,*,#276886,.T.); +#277066 = ORIENTED_EDGE('',*,*,#276917,.T.); +#277067 = ORIENTED_EDGE('',*,*,#276948,.T.); +#277068 = ORIENTED_EDGE('',*,*,#276979,.T.); +#277069 = ORIENTED_EDGE('',*,*,#277001,.T.); +#277070 = FACE_BOUND('',#277071,.T.); +#277071 = EDGE_LOOP('',(#277072)); +#277072 = ORIENTED_EDGE('',*,*,#277033,.T.); +#277073 = PLANE('',#277074); +#277074 = AXIS2_PLACEMENT_3D('',#277075,#277076,#277077); +#277075 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277076 = DIRECTION('',(0.,0.,1.)); +#277077 = DIRECTION('',(1.,0.,-0.)); +#277078 = ADVANCED_FACE('',(#277079,#277104),#277107,.T.); +#277079 = FACE_BOUND('',#277080,.F.); +#277080 = EDGE_LOOP('',(#277081,#277082,#277083,#277084,#277085,#277086, + #277087,#277088,#277089,#277090,#277091,#277092,#277093,#277094, + #277095,#277096,#277097,#277098,#277099,#277100,#277101,#277102, + #277103)); +#277081 = ORIENTED_EDGE('',*,*,#276306,.T.); +#277082 = ORIENTED_EDGE('',*,*,#276339,.T.); +#277083 = ORIENTED_EDGE('',*,*,#276370,.T.); +#277084 = ORIENTED_EDGE('',*,*,#276401,.T.); +#277085 = ORIENTED_EDGE('',*,*,#276432,.T.); +#277086 = ORIENTED_EDGE('',*,*,#276463,.T.); +#277087 = ORIENTED_EDGE('',*,*,#276494,.T.); +#277088 = ORIENTED_EDGE('',*,*,#276525,.T.); +#277089 = ORIENTED_EDGE('',*,*,#276556,.T.); +#277090 = ORIENTED_EDGE('',*,*,#276587,.T.); +#277091 = ORIENTED_EDGE('',*,*,#276618,.T.); +#277092 = ORIENTED_EDGE('',*,*,#276651,.T.); +#277093 = ORIENTED_EDGE('',*,*,#276682,.T.); +#277094 = ORIENTED_EDGE('',*,*,#276713,.T.); +#277095 = ORIENTED_EDGE('',*,*,#276744,.T.); +#277096 = ORIENTED_EDGE('',*,*,#276775,.T.); +#277097 = ORIENTED_EDGE('',*,*,#276806,.T.); +#277098 = ORIENTED_EDGE('',*,*,#276839,.T.); +#277099 = ORIENTED_EDGE('',*,*,#276870,.T.); +#277100 = ORIENTED_EDGE('',*,*,#276901,.T.); +#277101 = ORIENTED_EDGE('',*,*,#276932,.T.); +#277102 = ORIENTED_EDGE('',*,*,#276963,.T.); +#277103 = ORIENTED_EDGE('',*,*,#276994,.T.); +#277104 = FACE_BOUND('',#277105,.F.); +#277105 = EDGE_LOOP('',(#277106)); +#277106 = ORIENTED_EDGE('',*,*,#277025,.T.); +#277107 = PLANE('',#277108); +#277108 = AXIS2_PLACEMENT_3D('',#277109,#277110,#277111); +#277109 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277110 = DIRECTION('',(0.,0.,1.)); +#277111 = DIRECTION('',(1.,0.,-0.)); +#277112 = MANIFOLD_SOLID_BREP('',#277113); +#277113 = CLOSED_SHELL('',(#277114,#277154,#277185,#277218,#277249, + #277280,#277311,#277342,#277375,#277397,#277430,#277450)); +#277114 = ADVANCED_FACE('',(#277115),#277149,.T.); +#277115 = FACE_BOUND('',#277116,.T.); +#277116 = EDGE_LOOP('',(#277117,#277127,#277135,#277143)); +#277117 = ORIENTED_EDGE('',*,*,#277118,.T.); +#277118 = EDGE_CURVE('',#277119,#277121,#277123,.T.); +#277119 = VERTEX_POINT('',#277120); +#277120 = CARTESIAN_POINT('',(147.7695,-83.128078,1.51)); +#277121 = VERTEX_POINT('',#277122); +#277122 = CARTESIAN_POINT('',(147.7695,-83.128078,1.545)); +#277123 = LINE('',#277124,#277125); +#277124 = CARTESIAN_POINT('',(147.7695,-83.128078,1.51)); +#277125 = VECTOR('',#277126,1.); +#277126 = DIRECTION('',(0.,0.,1.)); +#277127 = ORIENTED_EDGE('',*,*,#277128,.T.); +#277128 = EDGE_CURVE('',#277121,#277129,#277131,.T.); +#277129 = VERTEX_POINT('',#277130); +#277130 = CARTESIAN_POINT('',(147.791421,-83.15,1.545)); +#277131 = LINE('',#277132,#277133); +#277132 = CARTESIAN_POINT('',(147.7695,-83.128078,1.545)); +#277133 = VECTOR('',#277134,1.); +#277134 = DIRECTION('',(0.707090652846,-0.707122909159,0.)); +#277135 = ORIENTED_EDGE('',*,*,#277136,.F.); +#277136 = EDGE_CURVE('',#277137,#277129,#277139,.T.); +#277137 = VERTEX_POINT('',#277138); +#277138 = CARTESIAN_POINT('',(147.791421,-83.15,1.51)); +#277139 = LINE('',#277140,#277141); +#277140 = CARTESIAN_POINT('',(147.791421,-83.15,1.51)); +#277141 = VECTOR('',#277142,1.); +#277142 = DIRECTION('',(0.,0.,1.)); +#277143 = ORIENTED_EDGE('',*,*,#277144,.F.); +#277144 = EDGE_CURVE('',#277119,#277137,#277145,.T.); +#277145 = LINE('',#277146,#277147); +#277146 = CARTESIAN_POINT('',(147.7695,-83.128078,1.51)); +#277147 = VECTOR('',#277148,1.); +#277148 = DIRECTION('',(0.707090652846,-0.707122909159,0.)); +#277149 = PLANE('',#277150); +#277150 = AXIS2_PLACEMENT_3D('',#277151,#277152,#277153); +#277151 = CARTESIAN_POINT('',(147.7695,-83.128078,1.51)); +#277152 = DIRECTION('',(0.707122909159,0.707090652846,-0.)); +#277153 = DIRECTION('',(0.707090652846,-0.707122909159,0.)); +#277154 = ADVANCED_FACE('',(#277155),#277180,.T.); +#277155 = FACE_BOUND('',#277156,.T.); +#277156 = EDGE_LOOP('',(#277157,#277158,#277166,#277174)); +#277157 = ORIENTED_EDGE('',*,*,#277136,.T.); +#277158 = ORIENTED_EDGE('',*,*,#277159,.T.); +#277159 = EDGE_CURVE('',#277129,#277160,#277162,.T.); +#277160 = VERTEX_POINT('',#277161); +#277161 = CARTESIAN_POINT('',(148.519509,-83.151921,1.545)); +#277162 = LINE('',#277163,#277164); +#277163 = CARTESIAN_POINT('',(147.791421,-83.15,1.545)); +#277164 = VECTOR('',#277165,1.); +#277165 = DIRECTION('',(0.999996519395,-2.638408150875E-03,0.)); +#277166 = ORIENTED_EDGE('',*,*,#277167,.F.); +#277167 = EDGE_CURVE('',#277168,#277160,#277170,.T.); +#277168 = VERTEX_POINT('',#277169); +#277169 = CARTESIAN_POINT('',(148.519509,-83.151921,1.51)); +#277170 = LINE('',#277171,#277172); +#277171 = CARTESIAN_POINT('',(148.519509,-83.151921,1.51)); +#277172 = VECTOR('',#277173,1.); +#277173 = DIRECTION('',(0.,0.,1.)); +#277174 = ORIENTED_EDGE('',*,*,#277175,.F.); +#277175 = EDGE_CURVE('',#277137,#277168,#277176,.T.); +#277176 = LINE('',#277177,#277178); +#277177 = CARTESIAN_POINT('',(147.791421,-83.15,1.51)); +#277178 = VECTOR('',#277179,1.); +#277179 = DIRECTION('',(0.999996519395,-2.638408150875E-03,0.)); +#277180 = PLANE('',#277181); +#277181 = AXIS2_PLACEMENT_3D('',#277182,#277183,#277184); +#277182 = CARTESIAN_POINT('',(147.791421,-83.15,1.51)); +#277183 = DIRECTION('',(2.638408150875E-03,0.999996519395,-0.)); +#277184 = DIRECTION('',(0.999996519395,-2.638408150875E-03,0.)); +#277185 = ADVANCED_FACE('',(#277186),#277213,.T.); +#277186 = FACE_BOUND('',#277187,.T.); +#277187 = EDGE_LOOP('',(#277188,#277189,#277198,#277206)); +#277188 = ORIENTED_EDGE('',*,*,#277167,.T.); +#277189 = ORIENTED_EDGE('',*,*,#277190,.T.); +#277190 = EDGE_CURVE('',#277160,#277191,#277193,.T.); +#277191 = VERTEX_POINT('',#277192); +#277192 = CARTESIAN_POINT('',(148.519509,-83.348079,1.545)); +#277193 = CIRCLE('',#277194,0.100000456609); +#277194 = AXIS2_PLACEMENT_3D('',#277195,#277196,#277197); +#277195 = CARTESIAN_POINT('',(148.5,-83.25,1.545)); +#277196 = DIRECTION('',(0.,0.,-1.)); +#277197 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#277198 = ORIENTED_EDGE('',*,*,#277199,.F.); +#277199 = EDGE_CURVE('',#277200,#277191,#277202,.T.); +#277200 = VERTEX_POINT('',#277201); +#277201 = CARTESIAN_POINT('',(148.519509,-83.348079,1.51)); +#277202 = LINE('',#277203,#277204); +#277203 = CARTESIAN_POINT('',(148.519509,-83.348079,1.51)); +#277204 = VECTOR('',#277205,1.); +#277205 = DIRECTION('',(0.,0.,1.)); +#277206 = ORIENTED_EDGE('',*,*,#277207,.F.); +#277207 = EDGE_CURVE('',#277168,#277200,#277208,.T.); +#277208 = CIRCLE('',#277209,0.100000456609); +#277209 = AXIS2_PLACEMENT_3D('',#277210,#277211,#277212); +#277210 = CARTESIAN_POINT('',(148.5,-83.25,1.51)); +#277211 = DIRECTION('',(0.,0.,-1.)); +#277212 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#277213 = CYLINDRICAL_SURFACE('',#277214,0.100000456609); +#277214 = AXIS2_PLACEMENT_3D('',#277215,#277216,#277217); +#277215 = CARTESIAN_POINT('',(148.5,-83.25,1.51)); +#277216 = DIRECTION('',(0.,0.,-1.)); +#277217 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#277218 = ADVANCED_FACE('',(#277219),#277244,.T.); +#277219 = FACE_BOUND('',#277220,.T.); +#277220 = EDGE_LOOP('',(#277221,#277222,#277230,#277238)); +#277221 = ORIENTED_EDGE('',*,*,#277199,.T.); +#277222 = ORIENTED_EDGE('',*,*,#277223,.T.); +#277223 = EDGE_CURVE('',#277191,#277224,#277226,.T.); +#277224 = VERTEX_POINT('',#277225); +#277225 = CARTESIAN_POINT('',(147.730491,-83.348079,1.545)); +#277226 = LINE('',#277227,#277228); +#277227 = CARTESIAN_POINT('',(148.519509,-83.348079,1.545)); +#277228 = VECTOR('',#277229,1.); +#277229 = DIRECTION('',(-1.,0.,0.)); +#277230 = ORIENTED_EDGE('',*,*,#277231,.F.); +#277231 = EDGE_CURVE('',#277232,#277224,#277234,.T.); +#277232 = VERTEX_POINT('',#277233); +#277233 = CARTESIAN_POINT('',(147.730491,-83.348079,1.51)); +#277234 = LINE('',#277235,#277236); +#277235 = CARTESIAN_POINT('',(147.730491,-83.348079,1.51)); +#277236 = VECTOR('',#277237,1.); +#277237 = DIRECTION('',(0.,0.,1.)); +#277238 = ORIENTED_EDGE('',*,*,#277239,.F.); +#277239 = EDGE_CURVE('',#277200,#277232,#277240,.T.); +#277240 = LINE('',#277241,#277242); +#277241 = CARTESIAN_POINT('',(148.519509,-83.348079,1.51)); +#277242 = VECTOR('',#277243,1.); +#277243 = DIRECTION('',(-1.,0.,0.)); +#277244 = PLANE('',#277245); +#277245 = AXIS2_PLACEMENT_3D('',#277246,#277247,#277248); +#277246 = CARTESIAN_POINT('',(148.519509,-83.348079,1.51)); +#277247 = DIRECTION('',(0.,-1.,0.)); +#277248 = DIRECTION('',(-1.,0.,0.)); +#277249 = ADVANCED_FACE('',(#277250),#277275,.T.); +#277250 = FACE_BOUND('',#277251,.T.); +#277251 = EDGE_LOOP('',(#277252,#277253,#277261,#277269)); +#277252 = ORIENTED_EDGE('',*,*,#277231,.T.); +#277253 = ORIENTED_EDGE('',*,*,#277254,.T.); +#277254 = EDGE_CURVE('',#277224,#277255,#277257,.T.); +#277255 = VERTEX_POINT('',#277256); +#277256 = CARTESIAN_POINT('',(147.694442,-83.333147,1.545)); +#277257 = LINE('',#277258,#277259); +#277258 = CARTESIAN_POINT('',(147.730491,-83.348079,1.545)); +#277259 = VECTOR('',#277260,1.); +#277260 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#277261 = ORIENTED_EDGE('',*,*,#277262,.F.); +#277262 = EDGE_CURVE('',#277263,#277255,#277265,.T.); +#277263 = VERTEX_POINT('',#277264); +#277264 = CARTESIAN_POINT('',(147.694442,-83.333147,1.51)); +#277265 = LINE('',#277266,#277267); +#277266 = CARTESIAN_POINT('',(147.694442,-83.333147,1.51)); +#277267 = VECTOR('',#277268,1.); +#277268 = DIRECTION('',(0.,0.,1.)); +#277269 = ORIENTED_EDGE('',*,*,#277270,.F.); +#277270 = EDGE_CURVE('',#277232,#277263,#277271,.T.); +#277271 = LINE('',#277272,#277273); +#277272 = CARTESIAN_POINT('',(147.730491,-83.348079,1.51)); +#277273 = VECTOR('',#277274,1.); +#277274 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#277275 = PLANE('',#277276); +#277276 = AXIS2_PLACEMENT_3D('',#277277,#277278,#277279); +#277277 = CARTESIAN_POINT('',(147.730491,-83.348079,1.51)); +#277278 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#277279 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#277280 = ADVANCED_FACE('',(#277281),#277306,.T.); +#277281 = FACE_BOUND('',#277282,.T.); +#277282 = EDGE_LOOP('',(#277283,#277284,#277292,#277300)); +#277283 = ORIENTED_EDGE('',*,*,#277262,.T.); +#277284 = ORIENTED_EDGE('',*,*,#277285,.T.); +#277285 = EDGE_CURVE('',#277255,#277286,#277288,.T.); +#277286 = VERTEX_POINT('',#277287); +#277287 = CARTESIAN_POINT('',(147.628078,-83.2695,1.545)); +#277288 = LINE('',#277289,#277290); +#277289 = CARTESIAN_POINT('',(147.694442,-83.333147,1.545)); +#277290 = VECTOR('',#277291,1.); +#277291 = DIRECTION('',(-0.721726477733,0.692178366709,0.)); +#277292 = ORIENTED_EDGE('',*,*,#277293,.F.); +#277293 = EDGE_CURVE('',#277294,#277286,#277296,.T.); +#277294 = VERTEX_POINT('',#277295); +#277295 = CARTESIAN_POINT('',(147.628078,-83.2695,1.51)); +#277296 = LINE('',#277297,#277298); +#277297 = CARTESIAN_POINT('',(147.628078,-83.2695,1.51)); +#277298 = VECTOR('',#277299,1.); +#277299 = DIRECTION('',(0.,0.,1.)); +#277300 = ORIENTED_EDGE('',*,*,#277301,.F.); +#277301 = EDGE_CURVE('',#277263,#277294,#277302,.T.); +#277302 = LINE('',#277303,#277304); +#277303 = CARTESIAN_POINT('',(147.694442,-83.333147,1.51)); +#277304 = VECTOR('',#277305,1.); +#277305 = DIRECTION('',(-0.721726477733,0.692178366709,0.)); +#277306 = PLANE('',#277307); +#277307 = AXIS2_PLACEMENT_3D('',#277308,#277309,#277310); +#277308 = CARTESIAN_POINT('',(147.694442,-83.333147,1.51)); +#277309 = DIRECTION('',(-0.692178366709,-0.721726477733,0.)); +#277310 = DIRECTION('',(-0.721726477733,0.692178366709,0.)); +#277311 = ADVANCED_FACE('',(#277312),#277337,.T.); +#277312 = FACE_BOUND('',#277313,.T.); +#277313 = EDGE_LOOP('',(#277314,#277315,#277323,#277331)); +#277314 = ORIENTED_EDGE('',*,*,#277293,.T.); +#277315 = ORIENTED_EDGE('',*,*,#277316,.T.); +#277316 = EDGE_CURVE('',#277286,#277317,#277319,.T.); +#277317 = VERTEX_POINT('',#277318); +#277318 = CARTESIAN_POINT('',(147.614805,-83.277164,1.545)); +#277319 = LINE('',#277320,#277321); +#277320 = CARTESIAN_POINT('',(147.628078,-83.2695,1.545)); +#277321 = VECTOR('',#277322,1.); +#277322 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#277323 = ORIENTED_EDGE('',*,*,#277324,.F.); +#277324 = EDGE_CURVE('',#277325,#277317,#277327,.T.); +#277325 = VERTEX_POINT('',#277326); +#277326 = CARTESIAN_POINT('',(147.614805,-83.277164,1.51)); +#277327 = LINE('',#277328,#277329); +#277328 = CARTESIAN_POINT('',(147.614805,-83.277164,1.51)); +#277329 = VECTOR('',#277330,1.); +#277330 = DIRECTION('',(0.,0.,1.)); +#277331 = ORIENTED_EDGE('',*,*,#277332,.F.); +#277332 = EDGE_CURVE('',#277294,#277325,#277333,.T.); +#277333 = LINE('',#277334,#277335); +#277334 = CARTESIAN_POINT('',(147.628078,-83.2695,1.51)); +#277335 = VECTOR('',#277336,1.); +#277336 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#277337 = PLANE('',#277338); +#277338 = AXIS2_PLACEMENT_3D('',#277339,#277340,#277341); +#277339 = CARTESIAN_POINT('',(147.628078,-83.2695,1.51)); +#277340 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#277341 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#277342 = ADVANCED_FACE('',(#277343),#277370,.T.); +#277343 = FACE_BOUND('',#277344,.T.); +#277344 = EDGE_LOOP('',(#277345,#277346,#277355,#277363)); +#277345 = ORIENTED_EDGE('',*,*,#277324,.T.); +#277346 = ORIENTED_EDGE('',*,*,#277347,.T.); +#277347 = EDGE_CURVE('',#277317,#277348,#277350,.T.); +#277348 = VERTEX_POINT('',#277349); +#277349 = CARTESIAN_POINT('',(147.777164,-83.114805,1.545)); +#277350 = CIRCLE('',#277351,0.300000118202); +#277351 = AXIS2_PLACEMENT_3D('',#277352,#277353,#277354); +#277352 = CARTESIAN_POINT('',(147.5,-83.,1.545)); +#277353 = DIRECTION('',(0.,0.,-1.)); +#277354 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#277355 = ORIENTED_EDGE('',*,*,#277356,.F.); +#277356 = EDGE_CURVE('',#277357,#277348,#277359,.T.); +#277357 = VERTEX_POINT('',#277358); +#277358 = CARTESIAN_POINT('',(147.777164,-83.114805,1.51)); +#277359 = LINE('',#277360,#277361); +#277360 = CARTESIAN_POINT('',(147.777164,-83.114805,1.51)); +#277361 = VECTOR('',#277362,1.); +#277362 = DIRECTION('',(0.,0.,1.)); +#277363 = ORIENTED_EDGE('',*,*,#277364,.F.); +#277364 = EDGE_CURVE('',#277325,#277357,#277365,.T.); +#277365 = CIRCLE('',#277366,0.300000118202); +#277366 = AXIS2_PLACEMENT_3D('',#277367,#277368,#277369); +#277367 = CARTESIAN_POINT('',(147.5,-83.,1.51)); +#277368 = DIRECTION('',(0.,0.,-1.)); +#277369 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#277370 = CYLINDRICAL_SURFACE('',#277371,0.300000118202); +#277371 = AXIS2_PLACEMENT_3D('',#277372,#277373,#277374); +#277372 = CARTESIAN_POINT('',(147.5,-83.,1.51)); +#277373 = DIRECTION('',(0.,0.,-1.)); +#277374 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#277375 = ADVANCED_FACE('',(#277376),#277392,.T.); +#277376 = FACE_BOUND('',#277377,.T.); +#277377 = EDGE_LOOP('',(#277378,#277379,#277385,#277386)); +#277378 = ORIENTED_EDGE('',*,*,#277356,.T.); +#277379 = ORIENTED_EDGE('',*,*,#277380,.T.); +#277380 = EDGE_CURVE('',#277348,#277121,#277381,.T.); +#277381 = LINE('',#277382,#277383); +#277382 = CARTESIAN_POINT('',(147.777164,-83.114805,1.545)); +#277383 = VECTOR('',#277384,1.); +#277384 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#277385 = ORIENTED_EDGE('',*,*,#277118,.F.); +#277386 = ORIENTED_EDGE('',*,*,#277387,.F.); +#277387 = EDGE_CURVE('',#277357,#277119,#277388,.T.); +#277388 = LINE('',#277389,#277390); +#277389 = CARTESIAN_POINT('',(147.777164,-83.114805,1.51)); +#277390 = VECTOR('',#277391,1.); +#277391 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#277392 = PLANE('',#277393); +#277393 = AXIS2_PLACEMENT_3D('',#277394,#277395,#277396); +#277394 = CARTESIAN_POINT('',(147.777164,-83.114805,1.51)); +#277395 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#277396 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#277397 = ADVANCED_FACE('',(#277398),#277425,.F.); +#277398 = FACE_BOUND('',#277399,.T.); +#277399 = EDGE_LOOP('',(#277400,#277410,#277417,#277418)); +#277400 = ORIENTED_EDGE('',*,*,#277401,.T.); +#277401 = EDGE_CURVE('',#277402,#277404,#277406,.T.); +#277402 = VERTEX_POINT('',#277403); +#277403 = CARTESIAN_POINT('',(147.637255,-83.,1.51)); +#277404 = VERTEX_POINT('',#277405); +#277405 = CARTESIAN_POINT('',(147.637255,-83.,1.545)); +#277406 = LINE('',#277407,#277408); +#277407 = CARTESIAN_POINT('',(147.637255,-83.,1.51)); +#277408 = VECTOR('',#277409,1.); +#277409 = DIRECTION('',(0.,0.,1.)); +#277410 = ORIENTED_EDGE('',*,*,#277411,.T.); +#277411 = EDGE_CURVE('',#277404,#277404,#277412,.T.); +#277412 = CIRCLE('',#277413,0.137255); +#277413 = AXIS2_PLACEMENT_3D('',#277414,#277415,#277416); +#277414 = CARTESIAN_POINT('',(147.5,-83.,1.545)); +#277415 = DIRECTION('',(0.,0.,1.)); +#277416 = DIRECTION('',(1.,0.,-0.)); +#277417 = ORIENTED_EDGE('',*,*,#277401,.F.); +#277418 = ORIENTED_EDGE('',*,*,#277419,.F.); +#277419 = EDGE_CURVE('',#277402,#277402,#277420,.T.); +#277420 = CIRCLE('',#277421,0.137255); +#277421 = AXIS2_PLACEMENT_3D('',#277422,#277423,#277424); +#277422 = CARTESIAN_POINT('',(147.5,-83.,1.51)); +#277423 = DIRECTION('',(0.,0.,1.)); +#277424 = DIRECTION('',(1.,0.,-0.)); +#277425 = CYLINDRICAL_SURFACE('',#277426,0.137255); +#277426 = AXIS2_PLACEMENT_3D('',#277427,#277428,#277429); +#277427 = CARTESIAN_POINT('',(147.5,-83.,1.51)); +#277428 = DIRECTION('',(-0.,-0.,-1.)); +#277429 = DIRECTION('',(1.,0.,-0.)); +#277430 = ADVANCED_FACE('',(#277431,#277442),#277445,.F.); +#277431 = FACE_BOUND('',#277432,.T.); +#277432 = EDGE_LOOP('',(#277433,#277434,#277435,#277436,#277437,#277438, + #277439,#277440,#277441)); +#277433 = ORIENTED_EDGE('',*,*,#277144,.T.); +#277434 = ORIENTED_EDGE('',*,*,#277175,.T.); +#277435 = ORIENTED_EDGE('',*,*,#277207,.T.); +#277436 = ORIENTED_EDGE('',*,*,#277239,.T.); +#277437 = ORIENTED_EDGE('',*,*,#277270,.T.); +#277438 = ORIENTED_EDGE('',*,*,#277301,.T.); +#277439 = ORIENTED_EDGE('',*,*,#277332,.T.); +#277440 = ORIENTED_EDGE('',*,*,#277364,.T.); +#277441 = ORIENTED_EDGE('',*,*,#277387,.T.); +#277442 = FACE_BOUND('',#277443,.T.); +#277443 = EDGE_LOOP('',(#277444)); +#277444 = ORIENTED_EDGE('',*,*,#277419,.T.); +#277445 = PLANE('',#277446); +#277446 = AXIS2_PLACEMENT_3D('',#277447,#277448,#277449); +#277447 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277448 = DIRECTION('',(0.,0.,1.)); +#277449 = DIRECTION('',(1.,0.,-0.)); +#277450 = ADVANCED_FACE('',(#277451,#277462),#277465,.T.); +#277451 = FACE_BOUND('',#277452,.F.); +#277452 = EDGE_LOOP('',(#277453,#277454,#277455,#277456,#277457,#277458, + #277459,#277460,#277461)); +#277453 = ORIENTED_EDGE('',*,*,#277128,.T.); +#277454 = ORIENTED_EDGE('',*,*,#277159,.T.); +#277455 = ORIENTED_EDGE('',*,*,#277190,.T.); +#277456 = ORIENTED_EDGE('',*,*,#277223,.T.); +#277457 = ORIENTED_EDGE('',*,*,#277254,.T.); +#277458 = ORIENTED_EDGE('',*,*,#277285,.T.); +#277459 = ORIENTED_EDGE('',*,*,#277316,.T.); +#277460 = ORIENTED_EDGE('',*,*,#277347,.T.); +#277461 = ORIENTED_EDGE('',*,*,#277380,.T.); +#277462 = FACE_BOUND('',#277463,.F.); +#277463 = EDGE_LOOP('',(#277464)); +#277464 = ORIENTED_EDGE('',*,*,#277411,.T.); +#277465 = PLANE('',#277466); +#277466 = AXIS2_PLACEMENT_3D('',#277467,#277468,#277469); +#277467 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277468 = DIRECTION('',(0.,0.,1.)); +#277469 = DIRECTION('',(1.,0.,-0.)); +#277470 = MANIFOLD_SOLID_BREP('',#277471); +#277471 = CLOSED_SHELL('',(#277472,#277505,#277538,#277550)); +#277472 = ADVANCED_FACE('',(#277473),#277500,.T.); +#277473 = FACE_BOUND('',#277474,.F.); +#277474 = EDGE_LOOP('',(#277475,#277485,#277492,#277493)); +#277475 = ORIENTED_EDGE('',*,*,#277476,.T.); +#277476 = EDGE_CURVE('',#277477,#277479,#277481,.T.); +#277477 = VERTEX_POINT('',#277478); +#277478 = CARTESIAN_POINT('',(143.1,-79.4,1.51)); +#277479 = VERTEX_POINT('',#277480); +#277480 = CARTESIAN_POINT('',(143.1,-79.4,1.545)); +#277481 = LINE('',#277482,#277483); +#277482 = CARTESIAN_POINT('',(143.1,-79.4,1.51)); +#277483 = VECTOR('',#277484,1.); +#277484 = DIRECTION('',(0.,0.,1.)); +#277485 = ORIENTED_EDGE('',*,*,#277486,.T.); +#277486 = EDGE_CURVE('',#277479,#277479,#277487,.T.); +#277487 = CIRCLE('',#277488,0.3); +#277488 = AXIS2_PLACEMENT_3D('',#277489,#277490,#277491); +#277489 = CARTESIAN_POINT('',(142.8,-79.4,1.545)); +#277490 = DIRECTION('',(0.,0.,1.)); +#277491 = DIRECTION('',(1.,0.,-0.)); +#277492 = ORIENTED_EDGE('',*,*,#277476,.F.); +#277493 = ORIENTED_EDGE('',*,*,#277494,.F.); +#277494 = EDGE_CURVE('',#277477,#277477,#277495,.T.); +#277495 = CIRCLE('',#277496,0.3); +#277496 = AXIS2_PLACEMENT_3D('',#277497,#277498,#277499); +#277497 = CARTESIAN_POINT('',(142.8,-79.4,1.51)); +#277498 = DIRECTION('',(0.,0.,1.)); +#277499 = DIRECTION('',(1.,0.,-0.)); +#277500 = CYLINDRICAL_SURFACE('',#277501,0.3); +#277501 = AXIS2_PLACEMENT_3D('',#277502,#277503,#277504); +#277502 = CARTESIAN_POINT('',(142.8,-79.4,1.51)); +#277503 = DIRECTION('',(-0.,-0.,-1.)); +#277504 = DIRECTION('',(1.,0.,-0.)); +#277505 = ADVANCED_FACE('',(#277506),#277533,.F.); +#277506 = FACE_BOUND('',#277507,.T.); +#277507 = EDGE_LOOP('',(#277508,#277518,#277525,#277526)); +#277508 = ORIENTED_EDGE('',*,*,#277509,.T.); +#277509 = EDGE_CURVE('',#277510,#277512,#277514,.T.); +#277510 = VERTEX_POINT('',#277511); +#277511 = CARTESIAN_POINT('',(142.937255,-79.4,1.51)); +#277512 = VERTEX_POINT('',#277513); +#277513 = CARTESIAN_POINT('',(142.937255,-79.4,1.545)); +#277514 = LINE('',#277515,#277516); +#277515 = CARTESIAN_POINT('',(142.937255,-79.4,1.51)); +#277516 = VECTOR('',#277517,1.); +#277517 = DIRECTION('',(0.,0.,1.)); +#277518 = ORIENTED_EDGE('',*,*,#277519,.T.); +#277519 = EDGE_CURVE('',#277512,#277512,#277520,.T.); +#277520 = CIRCLE('',#277521,0.137255); +#277521 = AXIS2_PLACEMENT_3D('',#277522,#277523,#277524); +#277522 = CARTESIAN_POINT('',(142.8,-79.4,1.545)); +#277523 = DIRECTION('',(0.,0.,1.)); +#277524 = DIRECTION('',(1.,0.,-0.)); +#277525 = ORIENTED_EDGE('',*,*,#277509,.F.); +#277526 = ORIENTED_EDGE('',*,*,#277527,.F.); +#277527 = EDGE_CURVE('',#277510,#277510,#277528,.T.); +#277528 = CIRCLE('',#277529,0.137255); +#277529 = AXIS2_PLACEMENT_3D('',#277530,#277531,#277532); +#277530 = CARTESIAN_POINT('',(142.8,-79.4,1.51)); +#277531 = DIRECTION('',(0.,0.,1.)); +#277532 = DIRECTION('',(1.,0.,-0.)); +#277533 = CYLINDRICAL_SURFACE('',#277534,0.137255); +#277534 = AXIS2_PLACEMENT_3D('',#277535,#277536,#277537); +#277535 = CARTESIAN_POINT('',(142.8,-79.4,1.51)); +#277536 = DIRECTION('',(-0.,-0.,-1.)); +#277537 = DIRECTION('',(1.,0.,-0.)); +#277538 = ADVANCED_FACE('',(#277539,#277542),#277545,.F.); +#277539 = FACE_BOUND('',#277540,.F.); +#277540 = EDGE_LOOP('',(#277541)); +#277541 = ORIENTED_EDGE('',*,*,#277494,.T.); +#277542 = FACE_BOUND('',#277543,.T.); +#277543 = EDGE_LOOP('',(#277544)); +#277544 = ORIENTED_EDGE('',*,*,#277527,.T.); +#277545 = PLANE('',#277546); +#277546 = AXIS2_PLACEMENT_3D('',#277547,#277548,#277549); +#277547 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277548 = DIRECTION('',(0.,0.,1.)); +#277549 = DIRECTION('',(1.,0.,-0.)); +#277550 = ADVANCED_FACE('',(#277551,#277554),#277557,.T.); +#277551 = FACE_BOUND('',#277552,.T.); +#277552 = EDGE_LOOP('',(#277553)); +#277553 = ORIENTED_EDGE('',*,*,#277486,.T.); +#277554 = FACE_BOUND('',#277555,.F.); +#277555 = EDGE_LOOP('',(#277556)); +#277556 = ORIENTED_EDGE('',*,*,#277519,.T.); +#277557 = PLANE('',#277558); +#277558 = AXIS2_PLACEMENT_3D('',#277559,#277560,#277561); +#277559 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277560 = DIRECTION('',(0.,0.,1.)); +#277561 = DIRECTION('',(1.,0.,-0.)); +#277562 = MANIFOLD_SOLID_BREP('',#277563); +#277563 = CLOSED_SHELL('',(#277564,#277597,#277630,#277642)); +#277564 = ADVANCED_FACE('',(#277565),#277592,.T.); +#277565 = FACE_BOUND('',#277566,.F.); +#277566 = EDGE_LOOP('',(#277567,#277577,#277584,#277585)); +#277567 = ORIENTED_EDGE('',*,*,#277568,.T.); +#277568 = EDGE_CURVE('',#277569,#277571,#277573,.T.); +#277569 = VERTEX_POINT('',#277570); +#277570 = CARTESIAN_POINT('',(137.7,-79.2,1.51)); +#277571 = VERTEX_POINT('',#277572); +#277572 = CARTESIAN_POINT('',(137.7,-79.2,1.545)); +#277573 = LINE('',#277574,#277575); +#277574 = CARTESIAN_POINT('',(137.7,-79.2,1.51)); +#277575 = VECTOR('',#277576,1.); +#277576 = DIRECTION('',(0.,0.,1.)); +#277577 = ORIENTED_EDGE('',*,*,#277578,.T.); +#277578 = EDGE_CURVE('',#277571,#277571,#277579,.T.); +#277579 = CIRCLE('',#277580,0.3); +#277580 = AXIS2_PLACEMENT_3D('',#277581,#277582,#277583); +#277581 = CARTESIAN_POINT('',(137.4,-79.2,1.545)); +#277582 = DIRECTION('',(0.,0.,1.)); +#277583 = DIRECTION('',(1.,0.,-0.)); +#277584 = ORIENTED_EDGE('',*,*,#277568,.F.); +#277585 = ORIENTED_EDGE('',*,*,#277586,.F.); +#277586 = EDGE_CURVE('',#277569,#277569,#277587,.T.); +#277587 = CIRCLE('',#277588,0.3); +#277588 = AXIS2_PLACEMENT_3D('',#277589,#277590,#277591); +#277589 = CARTESIAN_POINT('',(137.4,-79.2,1.51)); +#277590 = DIRECTION('',(0.,0.,1.)); +#277591 = DIRECTION('',(1.,0.,-0.)); +#277592 = CYLINDRICAL_SURFACE('',#277593,0.3); +#277593 = AXIS2_PLACEMENT_3D('',#277594,#277595,#277596); +#277594 = CARTESIAN_POINT('',(137.4,-79.2,1.51)); +#277595 = DIRECTION('',(-0.,-0.,-1.)); +#277596 = DIRECTION('',(1.,0.,-0.)); +#277597 = ADVANCED_FACE('',(#277598),#277625,.F.); +#277598 = FACE_BOUND('',#277599,.T.); +#277599 = EDGE_LOOP('',(#277600,#277610,#277617,#277618)); +#277600 = ORIENTED_EDGE('',*,*,#277601,.T.); +#277601 = EDGE_CURVE('',#277602,#277604,#277606,.T.); +#277602 = VERTEX_POINT('',#277603); +#277603 = CARTESIAN_POINT('',(137.537255,-79.2,1.51)); +#277604 = VERTEX_POINT('',#277605); +#277605 = CARTESIAN_POINT('',(137.537255,-79.2,1.545)); +#277606 = LINE('',#277607,#277608); +#277607 = CARTESIAN_POINT('',(137.537255,-79.2,1.51)); +#277608 = VECTOR('',#277609,1.); +#277609 = DIRECTION('',(0.,0.,1.)); +#277610 = ORIENTED_EDGE('',*,*,#277611,.T.); +#277611 = EDGE_CURVE('',#277604,#277604,#277612,.T.); +#277612 = CIRCLE('',#277613,0.137255); +#277613 = AXIS2_PLACEMENT_3D('',#277614,#277615,#277616); +#277614 = CARTESIAN_POINT('',(137.4,-79.2,1.545)); +#277615 = DIRECTION('',(0.,0.,1.)); +#277616 = DIRECTION('',(1.,0.,-0.)); +#277617 = ORIENTED_EDGE('',*,*,#277601,.F.); +#277618 = ORIENTED_EDGE('',*,*,#277619,.F.); +#277619 = EDGE_CURVE('',#277602,#277602,#277620,.T.); +#277620 = CIRCLE('',#277621,0.137255); +#277621 = AXIS2_PLACEMENT_3D('',#277622,#277623,#277624); +#277622 = CARTESIAN_POINT('',(137.4,-79.2,1.51)); +#277623 = DIRECTION('',(0.,0.,1.)); +#277624 = DIRECTION('',(1.,0.,-0.)); +#277625 = CYLINDRICAL_SURFACE('',#277626,0.137255); +#277626 = AXIS2_PLACEMENT_3D('',#277627,#277628,#277629); +#277627 = CARTESIAN_POINT('',(137.4,-79.2,1.51)); +#277628 = DIRECTION('',(-0.,-0.,-1.)); +#277629 = DIRECTION('',(1.,0.,-0.)); +#277630 = ADVANCED_FACE('',(#277631,#277634),#277637,.F.); +#277631 = FACE_BOUND('',#277632,.F.); +#277632 = EDGE_LOOP('',(#277633)); +#277633 = ORIENTED_EDGE('',*,*,#277586,.T.); +#277634 = FACE_BOUND('',#277635,.T.); +#277635 = EDGE_LOOP('',(#277636)); +#277636 = ORIENTED_EDGE('',*,*,#277619,.T.); +#277637 = PLANE('',#277638); +#277638 = AXIS2_PLACEMENT_3D('',#277639,#277640,#277641); +#277639 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277640 = DIRECTION('',(0.,0.,1.)); +#277641 = DIRECTION('',(1.,0.,-0.)); +#277642 = ADVANCED_FACE('',(#277643,#277646),#277649,.T.); +#277643 = FACE_BOUND('',#277644,.T.); +#277644 = EDGE_LOOP('',(#277645)); +#277645 = ORIENTED_EDGE('',*,*,#277578,.T.); +#277646 = FACE_BOUND('',#277647,.F.); +#277647 = EDGE_LOOP('',(#277648)); +#277648 = ORIENTED_EDGE('',*,*,#277611,.T.); +#277649 = PLANE('',#277650); +#277650 = AXIS2_PLACEMENT_3D('',#277651,#277652,#277653); +#277651 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277652 = DIRECTION('',(0.,0.,1.)); +#277653 = DIRECTION('',(1.,0.,-0.)); +#277654 = MANIFOLD_SOLID_BREP('',#277655); +#277655 = CLOSED_SHELL('',(#277656,#277689,#277722,#277734)); +#277656 = ADVANCED_FACE('',(#277657),#277684,.T.); +#277657 = FACE_BOUND('',#277658,.F.); +#277658 = EDGE_LOOP('',(#277659,#277669,#277676,#277677)); +#277659 = ORIENTED_EDGE('',*,*,#277660,.T.); +#277660 = EDGE_CURVE('',#277661,#277663,#277665,.T.); +#277661 = VERTEX_POINT('',#277662); +#277662 = CARTESIAN_POINT('',(140.3,-75.45,1.51)); +#277663 = VERTEX_POINT('',#277664); +#277664 = CARTESIAN_POINT('',(140.3,-75.45,1.545)); +#277665 = LINE('',#277666,#277667); +#277666 = CARTESIAN_POINT('',(140.3,-75.45,1.51)); +#277667 = VECTOR('',#277668,1.); +#277668 = DIRECTION('',(0.,0.,1.)); +#277669 = ORIENTED_EDGE('',*,*,#277670,.T.); +#277670 = EDGE_CURVE('',#277663,#277663,#277671,.T.); +#277671 = CIRCLE('',#277672,0.3); +#277672 = AXIS2_PLACEMENT_3D('',#277673,#277674,#277675); +#277673 = CARTESIAN_POINT('',(140.,-75.45,1.545)); +#277674 = DIRECTION('',(0.,0.,1.)); +#277675 = DIRECTION('',(1.,0.,-0.)); +#277676 = ORIENTED_EDGE('',*,*,#277660,.F.); +#277677 = ORIENTED_EDGE('',*,*,#277678,.F.); +#277678 = EDGE_CURVE('',#277661,#277661,#277679,.T.); +#277679 = CIRCLE('',#277680,0.3); +#277680 = AXIS2_PLACEMENT_3D('',#277681,#277682,#277683); +#277681 = CARTESIAN_POINT('',(140.,-75.45,1.51)); +#277682 = DIRECTION('',(0.,0.,1.)); +#277683 = DIRECTION('',(1.,0.,-0.)); +#277684 = CYLINDRICAL_SURFACE('',#277685,0.3); +#277685 = AXIS2_PLACEMENT_3D('',#277686,#277687,#277688); +#277686 = CARTESIAN_POINT('',(140.,-75.45,1.51)); +#277687 = DIRECTION('',(-0.,-0.,-1.)); +#277688 = DIRECTION('',(1.,0.,-0.)); +#277689 = ADVANCED_FACE('',(#277690),#277717,.F.); +#277690 = FACE_BOUND('',#277691,.T.); +#277691 = EDGE_LOOP('',(#277692,#277702,#277709,#277710)); +#277692 = ORIENTED_EDGE('',*,*,#277693,.T.); +#277693 = EDGE_CURVE('',#277694,#277696,#277698,.T.); +#277694 = VERTEX_POINT('',#277695); +#277695 = CARTESIAN_POINT('',(140.137255,-75.45,1.51)); +#277696 = VERTEX_POINT('',#277697); +#277697 = CARTESIAN_POINT('',(140.137255,-75.45,1.545)); +#277698 = LINE('',#277699,#277700); +#277699 = CARTESIAN_POINT('',(140.137255,-75.45,1.51)); +#277700 = VECTOR('',#277701,1.); +#277701 = DIRECTION('',(0.,0.,1.)); +#277702 = ORIENTED_EDGE('',*,*,#277703,.T.); +#277703 = EDGE_CURVE('',#277696,#277696,#277704,.T.); +#277704 = CIRCLE('',#277705,0.137255); +#277705 = AXIS2_PLACEMENT_3D('',#277706,#277707,#277708); +#277706 = CARTESIAN_POINT('',(140.,-75.45,1.545)); +#277707 = DIRECTION('',(0.,0.,1.)); +#277708 = DIRECTION('',(1.,0.,-0.)); +#277709 = ORIENTED_EDGE('',*,*,#277693,.F.); +#277710 = ORIENTED_EDGE('',*,*,#277711,.F.); +#277711 = EDGE_CURVE('',#277694,#277694,#277712,.T.); +#277712 = CIRCLE('',#277713,0.137255); +#277713 = AXIS2_PLACEMENT_3D('',#277714,#277715,#277716); +#277714 = CARTESIAN_POINT('',(140.,-75.45,1.51)); +#277715 = DIRECTION('',(0.,0.,1.)); +#277716 = DIRECTION('',(1.,0.,-0.)); +#277717 = CYLINDRICAL_SURFACE('',#277718,0.137255); +#277718 = AXIS2_PLACEMENT_3D('',#277719,#277720,#277721); +#277719 = CARTESIAN_POINT('',(140.,-75.45,1.51)); +#277720 = DIRECTION('',(-0.,-0.,-1.)); +#277721 = DIRECTION('',(1.,0.,-0.)); +#277722 = ADVANCED_FACE('',(#277723,#277726),#277729,.F.); +#277723 = FACE_BOUND('',#277724,.F.); +#277724 = EDGE_LOOP('',(#277725)); +#277725 = ORIENTED_EDGE('',*,*,#277678,.T.); +#277726 = FACE_BOUND('',#277727,.T.); +#277727 = EDGE_LOOP('',(#277728)); +#277728 = ORIENTED_EDGE('',*,*,#277711,.T.); +#277729 = PLANE('',#277730); +#277730 = AXIS2_PLACEMENT_3D('',#277731,#277732,#277733); +#277731 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277732 = DIRECTION('',(0.,0.,1.)); +#277733 = DIRECTION('',(1.,0.,-0.)); +#277734 = ADVANCED_FACE('',(#277735,#277738),#277741,.T.); +#277735 = FACE_BOUND('',#277736,.T.); +#277736 = EDGE_LOOP('',(#277737)); +#277737 = ORIENTED_EDGE('',*,*,#277670,.T.); +#277738 = FACE_BOUND('',#277739,.F.); +#277739 = EDGE_LOOP('',(#277740)); +#277740 = ORIENTED_EDGE('',*,*,#277703,.T.); +#277741 = PLANE('',#277742); +#277742 = AXIS2_PLACEMENT_3D('',#277743,#277744,#277745); +#277743 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277744 = DIRECTION('',(0.,0.,1.)); +#277745 = DIRECTION('',(1.,0.,-0.)); +#277746 = MANIFOLD_SOLID_BREP('',#277747); +#277747 = CLOSED_SHELL('',(#277748,#277781,#277814,#277826)); +#277748 = ADVANCED_FACE('',(#277749),#277776,.T.); +#277749 = FACE_BOUND('',#277750,.F.); +#277750 = EDGE_LOOP('',(#277751,#277761,#277768,#277769)); +#277751 = ORIENTED_EDGE('',*,*,#277752,.T.); +#277752 = EDGE_CURVE('',#277753,#277755,#277757,.T.); +#277753 = VERTEX_POINT('',#277754); +#277754 = CARTESIAN_POINT('',(141.2,-72.9,1.51)); +#277755 = VERTEX_POINT('',#277756); +#277756 = CARTESIAN_POINT('',(141.2,-72.9,1.545)); +#277757 = LINE('',#277758,#277759); +#277758 = CARTESIAN_POINT('',(141.2,-72.9,1.51)); +#277759 = VECTOR('',#277760,1.); +#277760 = DIRECTION('',(0.,0.,1.)); +#277761 = ORIENTED_EDGE('',*,*,#277762,.T.); +#277762 = EDGE_CURVE('',#277755,#277755,#277763,.T.); +#277763 = CIRCLE('',#277764,0.3); +#277764 = AXIS2_PLACEMENT_3D('',#277765,#277766,#277767); +#277765 = CARTESIAN_POINT('',(140.9,-72.9,1.545)); +#277766 = DIRECTION('',(0.,0.,1.)); +#277767 = DIRECTION('',(1.,0.,-0.)); +#277768 = ORIENTED_EDGE('',*,*,#277752,.F.); +#277769 = ORIENTED_EDGE('',*,*,#277770,.F.); +#277770 = EDGE_CURVE('',#277753,#277753,#277771,.T.); +#277771 = CIRCLE('',#277772,0.3); +#277772 = AXIS2_PLACEMENT_3D('',#277773,#277774,#277775); +#277773 = CARTESIAN_POINT('',(140.9,-72.9,1.51)); +#277774 = DIRECTION('',(0.,0.,1.)); +#277775 = DIRECTION('',(1.,0.,-0.)); +#277776 = CYLINDRICAL_SURFACE('',#277777,0.3); +#277777 = AXIS2_PLACEMENT_3D('',#277778,#277779,#277780); +#277778 = CARTESIAN_POINT('',(140.9,-72.9,1.51)); +#277779 = DIRECTION('',(-0.,-0.,-1.)); +#277780 = DIRECTION('',(1.,0.,-0.)); +#277781 = ADVANCED_FACE('',(#277782),#277809,.F.); +#277782 = FACE_BOUND('',#277783,.T.); +#277783 = EDGE_LOOP('',(#277784,#277794,#277801,#277802)); +#277784 = ORIENTED_EDGE('',*,*,#277785,.T.); +#277785 = EDGE_CURVE('',#277786,#277788,#277790,.T.); +#277786 = VERTEX_POINT('',#277787); +#277787 = CARTESIAN_POINT('',(141.037255,-72.9,1.51)); +#277788 = VERTEX_POINT('',#277789); +#277789 = CARTESIAN_POINT('',(141.037255,-72.9,1.545)); +#277790 = LINE('',#277791,#277792); +#277791 = CARTESIAN_POINT('',(141.037255,-72.9,1.51)); +#277792 = VECTOR('',#277793,1.); +#277793 = DIRECTION('',(0.,0.,1.)); +#277794 = ORIENTED_EDGE('',*,*,#277795,.T.); +#277795 = EDGE_CURVE('',#277788,#277788,#277796,.T.); +#277796 = CIRCLE('',#277797,0.137255); +#277797 = AXIS2_PLACEMENT_3D('',#277798,#277799,#277800); +#277798 = CARTESIAN_POINT('',(140.9,-72.9,1.545)); +#277799 = DIRECTION('',(0.,0.,1.)); +#277800 = DIRECTION('',(1.,0.,-0.)); +#277801 = ORIENTED_EDGE('',*,*,#277785,.F.); +#277802 = ORIENTED_EDGE('',*,*,#277803,.F.); +#277803 = EDGE_CURVE('',#277786,#277786,#277804,.T.); +#277804 = CIRCLE('',#277805,0.137255); +#277805 = AXIS2_PLACEMENT_3D('',#277806,#277807,#277808); +#277806 = CARTESIAN_POINT('',(140.9,-72.9,1.51)); +#277807 = DIRECTION('',(0.,0.,1.)); +#277808 = DIRECTION('',(1.,0.,-0.)); +#277809 = CYLINDRICAL_SURFACE('',#277810,0.137255); +#277810 = AXIS2_PLACEMENT_3D('',#277811,#277812,#277813); +#277811 = CARTESIAN_POINT('',(140.9,-72.9,1.51)); +#277812 = DIRECTION('',(-0.,-0.,-1.)); +#277813 = DIRECTION('',(1.,0.,-0.)); +#277814 = ADVANCED_FACE('',(#277815,#277818),#277821,.F.); +#277815 = FACE_BOUND('',#277816,.F.); +#277816 = EDGE_LOOP('',(#277817)); +#277817 = ORIENTED_EDGE('',*,*,#277770,.T.); +#277818 = FACE_BOUND('',#277819,.T.); +#277819 = EDGE_LOOP('',(#277820)); +#277820 = ORIENTED_EDGE('',*,*,#277803,.T.); +#277821 = PLANE('',#277822); +#277822 = AXIS2_PLACEMENT_3D('',#277823,#277824,#277825); +#277823 = CARTESIAN_POINT('',(0.,0.,1.51)); +#277824 = DIRECTION('',(0.,0.,1.)); +#277825 = DIRECTION('',(1.,0.,-0.)); +#277826 = ADVANCED_FACE('',(#277827,#277830),#277833,.T.); +#277827 = FACE_BOUND('',#277828,.T.); +#277828 = EDGE_LOOP('',(#277829)); +#277829 = ORIENTED_EDGE('',*,*,#277762,.T.); +#277830 = FACE_BOUND('',#277831,.F.); +#277831 = EDGE_LOOP('',(#277832)); +#277832 = ORIENTED_EDGE('',*,*,#277795,.T.); +#277833 = PLANE('',#277834); +#277834 = AXIS2_PLACEMENT_3D('',#277835,#277836,#277837); +#277835 = CARTESIAN_POINT('',(0.,0.,1.545)); +#277836 = DIRECTION('',(0.,0.,1.)); +#277837 = DIRECTION('',(1.,0.,-0.)); +#277838 = MANIFOLD_SOLID_BREP('',#277839); +#277839 = CLOSED_SHELL('',(#277840,#277882,#277913,#277944,#277975, + #278006,#278037,#278068,#278099,#278130,#278161,#278194,#278225, + #278256,#278287,#278318,#278349,#278380,#278411,#278442,#278473, + #278506,#278537,#278570,#278601,#278632,#278663,#278694,#278725, + #278756,#278787,#278818,#278849,#278880,#278911,#278942,#278975, + #278997,#279030,#279078)); +#277840 = ADVANCED_FACE('',(#277841),#277877,.T.); +#277841 = FACE_BOUND('',#277842,.T.); +#277842 = EDGE_LOOP('',(#277843,#277853,#277862,#277870)); +#277843 = ORIENTED_EDGE('',*,*,#277844,.T.); +#277844 = EDGE_CURVE('',#277845,#277847,#277849,.T.); +#277845 = VERTEX_POINT('',#277846); +#277846 = CARTESIAN_POINT('',(126.204442,-64.506853,1.51)); +#277847 = VERTEX_POINT('',#277848); +#277848 = CARTESIAN_POINT('',(126.204442,-64.506853,1.545)); +#277849 = LINE('',#277850,#277851); +#277850 = CARTESIAN_POINT('',(126.204442,-64.506853,1.51)); +#277851 = VECTOR('',#277852,1.); +#277852 = DIRECTION('',(0.,0.,1.)); +#277853 = ORIENTED_EDGE('',*,*,#277854,.T.); +#277854 = EDGE_CURVE('',#277847,#277855,#277857,.T.); +#277855 = VERTEX_POINT('',#277856); +#277856 = CARTESIAN_POINT('',(126.343147,-64.645558,1.545)); +#277857 = CIRCLE('',#277858,0.10000071281); +#277858 = AXIS2_PLACEMENT_3D('',#277859,#277860,#277861); +#277859 = CARTESIAN_POINT('',(126.2599995,-64.5900005,1.545)); +#277860 = DIRECTION('',(0.,0.,-1.)); +#277861 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#277862 = ORIENTED_EDGE('',*,*,#277863,.F.); +#277863 = EDGE_CURVE('',#277864,#277855,#277866,.T.); +#277864 = VERTEX_POINT('',#277865); +#277865 = CARTESIAN_POINT('',(126.343147,-64.645558,1.51)); +#277866 = LINE('',#277867,#277868); +#277867 = CARTESIAN_POINT('',(126.343147,-64.645558,1.51)); +#277868 = VECTOR('',#277869,1.); +#277869 = DIRECTION('',(0.,0.,1.)); +#277870 = ORIENTED_EDGE('',*,*,#277871,.F.); +#277871 = EDGE_CURVE('',#277845,#277864,#277872,.T.); +#277872 = CIRCLE('',#277873,0.10000071281); +#277873 = AXIS2_PLACEMENT_3D('',#277874,#277875,#277876); +#277874 = CARTESIAN_POINT('',(126.2599995,-64.5900005,1.51)); +#277875 = DIRECTION('',(0.,0.,-1.)); +#277876 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#277877 = CYLINDRICAL_SURFACE('',#277878,0.10000071281); +#277878 = AXIS2_PLACEMENT_3D('',#277879,#277880,#277881); +#277879 = CARTESIAN_POINT('',(126.2599995,-64.5900005,1.51)); +#277880 = DIRECTION('',(0.,0.,-1.)); +#277881 = DIRECTION('',(-0.555571039834,0.831469073206,0.)); +#277882 = ADVANCED_FACE('',(#277883),#277908,.T.); +#277883 = FACE_BOUND('',#277884,.T.); +#277884 = EDGE_LOOP('',(#277885,#277886,#277894,#277902)); +#277885 = ORIENTED_EDGE('',*,*,#277863,.T.); +#277886 = ORIENTED_EDGE('',*,*,#277887,.T.); +#277887 = EDGE_CURVE('',#277855,#277888,#277890,.T.); +#277888 = VERTEX_POINT('',#277889); +#277889 = CARTESIAN_POINT('',(126.291421,-64.699999,1.545)); +#277890 = LINE('',#277891,#277892); +#277891 = CARTESIAN_POINT('',(126.343147,-64.645558,1.545)); +#277892 = VECTOR('',#277893,1.); +#277893 = DIRECTION('',(-0.688798805863,-0.724952553648,0.)); +#277894 = ORIENTED_EDGE('',*,*,#277895,.F.); +#277895 = EDGE_CURVE('',#277896,#277888,#277898,.T.); +#277896 = VERTEX_POINT('',#277897); +#277897 = CARTESIAN_POINT('',(126.291421,-64.699999,1.51)); +#277898 = LINE('',#277899,#277900); +#277899 = CARTESIAN_POINT('',(126.291421,-64.699999,1.51)); +#277900 = VECTOR('',#277901,1.); +#277901 = DIRECTION('',(0.,0.,1.)); +#277902 = ORIENTED_EDGE('',*,*,#277903,.F.); +#277903 = EDGE_CURVE('',#277864,#277896,#277904,.T.); +#277904 = LINE('',#277905,#277906); +#277905 = CARTESIAN_POINT('',(126.343147,-64.645558,1.51)); +#277906 = VECTOR('',#277907,1.); +#277907 = DIRECTION('',(-0.688798805863,-0.724952553648,0.)); +#277908 = PLANE('',#277909); +#277909 = AXIS2_PLACEMENT_3D('',#277910,#277911,#277912); +#277910 = CARTESIAN_POINT('',(126.343147,-64.645558,1.51)); +#277911 = DIRECTION('',(0.724952553648,-0.688798805863,0.)); +#277912 = DIRECTION('',(-0.688798805863,-0.724952553648,0.)); +#277913 = ADVANCED_FACE('',(#277914),#277939,.T.); +#277914 = FACE_BOUND('',#277915,.T.); +#277915 = EDGE_LOOP('',(#277916,#277917,#277925,#277933)); +#277916 = ORIENTED_EDGE('',*,*,#277895,.T.); +#277917 = ORIENTED_EDGE('',*,*,#277918,.T.); +#277918 = EDGE_CURVE('',#277888,#277919,#277921,.T.); +#277919 = VERTEX_POINT('',#277920); +#277920 = CARTESIAN_POINT('',(126.851422,-65.26,1.545)); +#277921 = LINE('',#277922,#277923); +#277922 = CARTESIAN_POINT('',(126.291421,-64.699999,1.545)); +#277923 = VECTOR('',#277924,1.); +#277924 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#277925 = ORIENTED_EDGE('',*,*,#277926,.F.); +#277926 = EDGE_CURVE('',#277927,#277919,#277929,.T.); +#277927 = VERTEX_POINT('',#277928); +#277928 = CARTESIAN_POINT('',(126.851422,-65.26,1.51)); +#277929 = LINE('',#277930,#277931); +#277930 = CARTESIAN_POINT('',(126.851422,-65.26,1.51)); +#277931 = VECTOR('',#277932,1.); +#277932 = DIRECTION('',(0.,0.,1.)); +#277933 = ORIENTED_EDGE('',*,*,#277934,.F.); +#277934 = EDGE_CURVE('',#277896,#277927,#277935,.T.); +#277935 = LINE('',#277936,#277937); +#277936 = CARTESIAN_POINT('',(126.291421,-64.699999,1.51)); +#277937 = VECTOR('',#277938,1.); +#277938 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#277939 = PLANE('',#277940); +#277940 = AXIS2_PLACEMENT_3D('',#277941,#277942,#277943); +#277941 = CARTESIAN_POINT('',(126.291421,-64.699999,1.51)); +#277942 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#277943 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#277944 = ADVANCED_FACE('',(#277945),#277970,.T.); +#277945 = FACE_BOUND('',#277946,.T.); +#277946 = EDGE_LOOP('',(#277947,#277948,#277956,#277964)); +#277947 = ORIENTED_EDGE('',*,*,#277926,.T.); +#277948 = ORIENTED_EDGE('',*,*,#277949,.T.); +#277949 = EDGE_CURVE('',#277919,#277950,#277952,.T.); +#277950 = VERTEX_POINT('',#277951); +#277951 = CARTESIAN_POINT('',(127.759509,-65.261921,1.545)); +#277952 = LINE('',#277953,#277954); +#277953 = CARTESIAN_POINT('',(126.851422,-65.26,1.545)); +#277954 = VECTOR('',#277955,1.); +#277955 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#277956 = ORIENTED_EDGE('',*,*,#277957,.F.); +#277957 = EDGE_CURVE('',#277958,#277950,#277960,.T.); +#277958 = VERTEX_POINT('',#277959); +#277959 = CARTESIAN_POINT('',(127.759509,-65.261921,1.51)); +#277960 = LINE('',#277961,#277962); +#277961 = CARTESIAN_POINT('',(127.759509,-65.261921,1.51)); +#277962 = VECTOR('',#277963,1.); +#277963 = DIRECTION('',(0.,0.,1.)); +#277964 = ORIENTED_EDGE('',*,*,#277965,.F.); +#277965 = EDGE_CURVE('',#277927,#277958,#277966,.T.); +#277966 = LINE('',#277967,#277968); +#277967 = CARTESIAN_POINT('',(126.851422,-65.26,1.51)); +#277968 = VECTOR('',#277969,1.); +#277969 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#277970 = PLANE('',#277971); +#277971 = AXIS2_PLACEMENT_3D('',#277972,#277973,#277974); +#277972 = CARTESIAN_POINT('',(126.851422,-65.26,1.51)); +#277973 = DIRECTION('',(2.115431342708E-03,0.999997762473,-0.)); +#277974 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#277975 = ADVANCED_FACE('',(#277976),#278001,.T.); +#277976 = FACE_BOUND('',#277977,.T.); +#277977 = EDGE_LOOP('',(#277978,#277979,#277987,#277995)); +#277978 = ORIENTED_EDGE('',*,*,#277957,.T.); +#277979 = ORIENTED_EDGE('',*,*,#277980,.T.); +#277980 = EDGE_CURVE('',#277950,#277981,#277983,.T.); +#277981 = VERTEX_POINT('',#277982); +#277982 = CARTESIAN_POINT('',(127.795557,-65.276853,1.545)); +#277983 = LINE('',#277984,#277985); +#277984 = CARTESIAN_POINT('',(127.759509,-65.261921,1.545)); +#277985 = VECTOR('',#277986,1.); +#277986 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#277987 = ORIENTED_EDGE('',*,*,#277988,.F.); +#277988 = EDGE_CURVE('',#277989,#277981,#277991,.T.); +#277989 = VERTEX_POINT('',#277990); +#277990 = CARTESIAN_POINT('',(127.795557,-65.276853,1.51)); +#277991 = LINE('',#277992,#277993); +#277992 = CARTESIAN_POINT('',(127.795557,-65.276853,1.51)); +#277993 = VECTOR('',#277994,1.); +#277994 = DIRECTION('',(0.,0.,1.)); +#277995 = ORIENTED_EDGE('',*,*,#277996,.F.); +#277996 = EDGE_CURVE('',#277958,#277989,#277997,.T.); +#277997 = LINE('',#277998,#277999); +#277998 = CARTESIAN_POINT('',(127.759509,-65.261921,1.51)); +#277999 = VECTOR('',#278000,1.); +#278000 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#278001 = PLANE('',#278002); +#278002 = AXIS2_PLACEMENT_3D('',#278003,#278004,#278005); +#278003 = CARTESIAN_POINT('',(127.759509,-65.261921,1.51)); +#278004 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#278005 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#278006 = ADVANCED_FACE('',(#278007),#278032,.T.); +#278007 = FACE_BOUND('',#278008,.T.); +#278008 = EDGE_LOOP('',(#278009,#278010,#278018,#278026)); +#278009 = ORIENTED_EDGE('',*,*,#277988,.T.); +#278010 = ORIENTED_EDGE('',*,*,#278011,.T.); +#278011 = EDGE_CURVE('',#277981,#278012,#278014,.T.); +#278012 = VERTEX_POINT('',#278013); +#278013 = CARTESIAN_POINT('',(128.341421,-65.82,1.545)); +#278014 = LINE('',#278015,#278016); +#278015 = CARTESIAN_POINT('',(127.795557,-65.276853,1.545)); +#278016 = VECTOR('',#278017,1.); +#278017 = DIRECTION('',(0.708868752848,-0.705340408056,0.)); +#278018 = ORIENTED_EDGE('',*,*,#278019,.F.); +#278019 = EDGE_CURVE('',#278020,#278012,#278022,.T.); +#278020 = VERTEX_POINT('',#278021); +#278021 = CARTESIAN_POINT('',(128.341421,-65.82,1.51)); +#278022 = LINE('',#278023,#278024); +#278023 = CARTESIAN_POINT('',(128.341421,-65.82,1.51)); +#278024 = VECTOR('',#278025,1.); +#278025 = DIRECTION('',(0.,0.,1.)); +#278026 = ORIENTED_EDGE('',*,*,#278027,.F.); +#278027 = EDGE_CURVE('',#277989,#278020,#278028,.T.); +#278028 = LINE('',#278029,#278030); +#278029 = CARTESIAN_POINT('',(127.795557,-65.276853,1.51)); +#278030 = VECTOR('',#278031,1.); +#278031 = DIRECTION('',(0.708868752848,-0.705340408056,0.)); +#278032 = PLANE('',#278033); +#278033 = AXIS2_PLACEMENT_3D('',#278034,#278035,#278036); +#278034 = CARTESIAN_POINT('',(127.795557,-65.276853,1.51)); +#278035 = DIRECTION('',(0.705340408056,0.708868752848,-0.)); +#278036 = DIRECTION('',(0.708868752848,-0.705340408056,0.)); +#278037 = ADVANCED_FACE('',(#278038),#278063,.T.); +#278038 = FACE_BOUND('',#278039,.T.); +#278039 = EDGE_LOOP('',(#278040,#278041,#278049,#278057)); +#278040 = ORIENTED_EDGE('',*,*,#278019,.T.); +#278041 = ORIENTED_EDGE('',*,*,#278042,.T.); +#278042 = EDGE_CURVE('',#278012,#278043,#278045,.T.); +#278043 = VERTEX_POINT('',#278044); +#278044 = CARTESIAN_POINT('',(129.790608,-65.82,1.545)); +#278045 = LINE('',#278046,#278047); +#278046 = CARTESIAN_POINT('',(128.341421,-65.82,1.545)); +#278047 = VECTOR('',#278048,1.); +#278048 = DIRECTION('',(1.,0.,0.)); +#278049 = ORIENTED_EDGE('',*,*,#278050,.F.); +#278050 = EDGE_CURVE('',#278051,#278043,#278053,.T.); +#278051 = VERTEX_POINT('',#278052); +#278052 = CARTESIAN_POINT('',(129.790608,-65.82,1.51)); +#278053 = LINE('',#278054,#278055); +#278054 = CARTESIAN_POINT('',(129.790608,-65.82,1.51)); +#278055 = VECTOR('',#278056,1.); +#278056 = DIRECTION('',(0.,0.,1.)); +#278057 = ORIENTED_EDGE('',*,*,#278058,.F.); +#278058 = EDGE_CURVE('',#278020,#278051,#278059,.T.); +#278059 = LINE('',#278060,#278061); +#278060 = CARTESIAN_POINT('',(128.341421,-65.82,1.51)); +#278061 = VECTOR('',#278062,1.); +#278062 = DIRECTION('',(1.,0.,0.)); +#278063 = PLANE('',#278064); +#278064 = AXIS2_PLACEMENT_3D('',#278065,#278066,#278067); +#278065 = CARTESIAN_POINT('',(128.341421,-65.82,1.51)); +#278066 = DIRECTION('',(0.,1.,0.)); +#278067 = DIRECTION('',(1.,0.,0.)); +#278068 = ADVANCED_FACE('',(#278069),#278094,.T.); +#278069 = FACE_BOUND('',#278070,.T.); +#278070 = EDGE_LOOP('',(#278071,#278072,#278080,#278088)); +#278071 = ORIENTED_EDGE('',*,*,#278050,.T.); +#278072 = ORIENTED_EDGE('',*,*,#278073,.T.); +#278073 = EDGE_CURVE('',#278043,#278074,#278076,.T.); +#278074 = VERTEX_POINT('',#278075); +#278075 = CARTESIAN_POINT('',(129.830491,-65.801921,1.545)); +#278076 = LINE('',#278077,#278078); +#278077 = CARTESIAN_POINT('',(129.790608,-65.82,1.545)); +#278078 = VECTOR('',#278079,1.); +#278079 = DIRECTION('',(0.910793006306,0.41286329416,0.)); +#278080 = ORIENTED_EDGE('',*,*,#278081,.F.); +#278081 = EDGE_CURVE('',#278082,#278074,#278084,.T.); +#278082 = VERTEX_POINT('',#278083); +#278083 = CARTESIAN_POINT('',(129.830491,-65.801921,1.51)); +#278084 = LINE('',#278085,#278086); +#278085 = CARTESIAN_POINT('',(129.830491,-65.801921,1.51)); +#278086 = VECTOR('',#278087,1.); +#278087 = DIRECTION('',(0.,0.,1.)); +#278088 = ORIENTED_EDGE('',*,*,#278089,.F.); +#278089 = EDGE_CURVE('',#278051,#278082,#278090,.T.); +#278090 = LINE('',#278091,#278092); +#278091 = CARTESIAN_POINT('',(129.790608,-65.82,1.51)); +#278092 = VECTOR('',#278093,1.); +#278093 = DIRECTION('',(0.910793006306,0.41286329416,0.)); +#278094 = PLANE('',#278095); +#278095 = AXIS2_PLACEMENT_3D('',#278096,#278097,#278098); +#278096 = CARTESIAN_POINT('',(129.790608,-65.82,1.51)); +#278097 = DIRECTION('',(-0.41286329416,0.910793006306,0.)); +#278098 = DIRECTION('',(0.910793006306,0.41286329416,0.)); +#278099 = ADVANCED_FACE('',(#278100),#278125,.T.); +#278100 = FACE_BOUND('',#278101,.T.); +#278101 = EDGE_LOOP('',(#278102,#278103,#278111,#278119)); +#278102 = ORIENTED_EDGE('',*,*,#278081,.T.); +#278103 = ORIENTED_EDGE('',*,*,#278104,.T.); +#278104 = EDGE_CURVE('',#278074,#278105,#278107,.T.); +#278105 = VERTEX_POINT('',#278106); +#278106 = CARTESIAN_POINT('',(130.518869,-65.8,1.545)); +#278107 = LINE('',#278108,#278109); +#278108 = CARTESIAN_POINT('',(129.830491,-65.801921,1.545)); +#278109 = VECTOR('',#278110,1.); +#278110 = DIRECTION('',(0.999996106248,2.790607079394E-03,0.)); +#278111 = ORIENTED_EDGE('',*,*,#278112,.F.); +#278112 = EDGE_CURVE('',#278113,#278105,#278115,.T.); +#278113 = VERTEX_POINT('',#278114); +#278114 = CARTESIAN_POINT('',(130.518869,-65.8,1.51)); +#278115 = LINE('',#278116,#278117); +#278116 = CARTESIAN_POINT('',(130.518869,-65.8,1.51)); +#278117 = VECTOR('',#278118,1.); +#278118 = DIRECTION('',(0.,0.,1.)); +#278119 = ORIENTED_EDGE('',*,*,#278120,.F.); +#278120 = EDGE_CURVE('',#278082,#278113,#278121,.T.); +#278121 = LINE('',#278122,#278123); +#278122 = CARTESIAN_POINT('',(129.830491,-65.801921,1.51)); +#278123 = VECTOR('',#278124,1.); +#278124 = DIRECTION('',(0.999996106248,2.790607079394E-03,0.)); +#278125 = PLANE('',#278126); +#278126 = AXIS2_PLACEMENT_3D('',#278127,#278128,#278129); +#278127 = CARTESIAN_POINT('',(129.830491,-65.801921,1.51)); +#278128 = DIRECTION('',(-2.790607079394E-03,0.999996106248,0.)); +#278129 = DIRECTION('',(0.999996106248,2.790607079394E-03,0.)); +#278130 = ADVANCED_FACE('',(#278131),#278156,.T.); +#278131 = FACE_BOUND('',#278132,.T.); +#278132 = EDGE_LOOP('',(#278133,#278134,#278142,#278150)); +#278133 = ORIENTED_EDGE('',*,*,#278112,.T.); +#278134 = ORIENTED_EDGE('',*,*,#278135,.T.); +#278135 = EDGE_CURVE('',#278105,#278136,#278138,.T.); +#278136 = VERTEX_POINT('',#278137); +#278137 = CARTESIAN_POINT('',(130.522836,-65.785195,1.545)); +#278138 = LINE('',#278139,#278140); +#278139 = CARTESIAN_POINT('',(130.518869,-65.8,1.545)); +#278140 = VECTOR('',#278141,1.); +#278141 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#278142 = ORIENTED_EDGE('',*,*,#278143,.F.); +#278143 = EDGE_CURVE('',#278144,#278136,#278146,.T.); +#278144 = VERTEX_POINT('',#278145); +#278145 = CARTESIAN_POINT('',(130.522836,-65.785195,1.51)); +#278146 = LINE('',#278147,#278148); +#278147 = CARTESIAN_POINT('',(130.522836,-65.785195,1.51)); +#278148 = VECTOR('',#278149,1.); +#278149 = DIRECTION('',(0.,0.,1.)); +#278150 = ORIENTED_EDGE('',*,*,#278151,.F.); +#278151 = EDGE_CURVE('',#278113,#278144,#278152,.T.); +#278152 = LINE('',#278153,#278154); +#278153 = CARTESIAN_POINT('',(130.518869,-65.8,1.51)); +#278154 = VECTOR('',#278155,1.); +#278155 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#278156 = PLANE('',#278157); +#278157 = AXIS2_PLACEMENT_3D('',#278158,#278159,#278160); +#278158 = CARTESIAN_POINT('',(130.518869,-65.8,1.51)); +#278159 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#278160 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#278161 = ADVANCED_FACE('',(#278162),#278189,.T.); +#278162 = FACE_BOUND('',#278163,.T.); +#278163 = EDGE_LOOP('',(#278164,#278165,#278174,#278182)); +#278164 = ORIENTED_EDGE('',*,*,#278143,.T.); +#278165 = ORIENTED_EDGE('',*,*,#278166,.T.); +#278166 = EDGE_CURVE('',#278136,#278167,#278169,.T.); +#278167 = VERTEX_POINT('',#278168); +#278168 = CARTESIAN_POINT('',(130.522836,-66.014805,1.545)); +#278169 = CIRCLE('',#278170,0.299999850918); +#278170 = AXIS2_PLACEMENT_3D('',#278171,#278172,#278173); +#278171 = CARTESIAN_POINT('',(130.79999971069,-65.9,1.545)); +#278172 = DIRECTION('',(0.,0.,-1.)); +#278173 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#278174 = ORIENTED_EDGE('',*,*,#278175,.F.); +#278175 = EDGE_CURVE('',#278176,#278167,#278178,.T.); +#278176 = VERTEX_POINT('',#278177); +#278177 = CARTESIAN_POINT('',(130.522836,-66.014805,1.51)); +#278178 = LINE('',#278179,#278180); +#278179 = CARTESIAN_POINT('',(130.522836,-66.014805,1.51)); +#278180 = VECTOR('',#278181,1.); +#278181 = DIRECTION('',(0.,0.,1.)); +#278182 = ORIENTED_EDGE('',*,*,#278183,.F.); +#278183 = EDGE_CURVE('',#278144,#278176,#278184,.T.); +#278184 = CIRCLE('',#278185,0.299999850918); +#278185 = AXIS2_PLACEMENT_3D('',#278186,#278187,#278188); +#278186 = CARTESIAN_POINT('',(130.79999971069,-65.9,1.51)); +#278187 = DIRECTION('',(0.,0.,-1.)); +#278188 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#278189 = CYLINDRICAL_SURFACE('',#278190,0.299999850918); +#278190 = AXIS2_PLACEMENT_3D('',#278191,#278192,#278193); +#278191 = CARTESIAN_POINT('',(130.79999971069,-65.9,1.51)); +#278192 = DIRECTION('',(0.,0.,-1.)); +#278193 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#278194 = ADVANCED_FACE('',(#278195),#278220,.T.); +#278195 = FACE_BOUND('',#278196,.T.); +#278196 = EDGE_LOOP('',(#278197,#278198,#278206,#278214)); +#278197 = ORIENTED_EDGE('',*,*,#278175,.T.); +#278198 = ORIENTED_EDGE('',*,*,#278199,.T.); +#278199 = EDGE_CURVE('',#278167,#278200,#278202,.T.); +#278200 = VERTEX_POINT('',#278201); +#278201 = CARTESIAN_POINT('',(130.518869,-66.,1.545)); +#278202 = LINE('',#278203,#278204); +#278203 = CARTESIAN_POINT('',(130.522836,-66.014805,1.545)); +#278204 = VECTOR('',#278205,1.); +#278205 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#278206 = ORIENTED_EDGE('',*,*,#278207,.F.); +#278207 = EDGE_CURVE('',#278208,#278200,#278210,.T.); +#278208 = VERTEX_POINT('',#278209); +#278209 = CARTESIAN_POINT('',(130.518869,-66.,1.51)); +#278210 = LINE('',#278211,#278212); +#278211 = CARTESIAN_POINT('',(130.518869,-66.,1.51)); +#278212 = VECTOR('',#278213,1.); +#278213 = DIRECTION('',(0.,0.,1.)); +#278214 = ORIENTED_EDGE('',*,*,#278215,.F.); +#278215 = EDGE_CURVE('',#278176,#278208,#278216,.T.); +#278216 = LINE('',#278217,#278218); +#278217 = CARTESIAN_POINT('',(130.522836,-66.014805,1.51)); +#278218 = VECTOR('',#278219,1.); +#278219 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#278220 = PLANE('',#278221); +#278221 = AXIS2_PLACEMENT_3D('',#278222,#278223,#278224); +#278222 = CARTESIAN_POINT('',(130.522836,-66.014805,1.51)); +#278223 = DIRECTION('',(-0.965925627198,-0.25881978812,0.)); +#278224 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#278225 = ADVANCED_FACE('',(#278226),#278251,.T.); +#278226 = FACE_BOUND('',#278227,.T.); +#278227 = EDGE_LOOP('',(#278228,#278229,#278237,#278245)); +#278228 = ORIENTED_EDGE('',*,*,#278207,.T.); +#278229 = ORIENTED_EDGE('',*,*,#278230,.T.); +#278230 = EDGE_CURVE('',#278200,#278231,#278233,.T.); +#278231 = VERTEX_POINT('',#278232); +#278232 = CARTESIAN_POINT('',(129.889392,-66.,1.545)); +#278233 = LINE('',#278234,#278235); +#278234 = CARTESIAN_POINT('',(130.518869,-66.,1.545)); +#278235 = VECTOR('',#278236,1.); +#278236 = DIRECTION('',(-1.,0.,0.)); +#278237 = ORIENTED_EDGE('',*,*,#278238,.F.); +#278238 = EDGE_CURVE('',#278239,#278231,#278241,.T.); +#278239 = VERTEX_POINT('',#278240); +#278240 = CARTESIAN_POINT('',(129.889392,-66.,1.51)); +#278241 = LINE('',#278242,#278243); +#278242 = CARTESIAN_POINT('',(129.889392,-66.,1.51)); +#278243 = VECTOR('',#278244,1.); +#278244 = DIRECTION('',(0.,0.,1.)); +#278245 = ORIENTED_EDGE('',*,*,#278246,.F.); +#278246 = EDGE_CURVE('',#278208,#278239,#278247,.T.); +#278247 = LINE('',#278248,#278249); +#278248 = CARTESIAN_POINT('',(130.518869,-66.,1.51)); +#278249 = VECTOR('',#278250,1.); +#278250 = DIRECTION('',(-1.,0.,0.)); +#278251 = PLANE('',#278252); +#278252 = AXIS2_PLACEMENT_3D('',#278253,#278254,#278255); +#278253 = CARTESIAN_POINT('',(130.518869,-66.,1.51)); +#278254 = DIRECTION('',(0.,-1.,0.)); +#278255 = DIRECTION('',(-1.,0.,0.)); +#278256 = ADVANCED_FACE('',(#278257),#278282,.T.); +#278257 = FACE_BOUND('',#278258,.T.); +#278258 = EDGE_LOOP('',(#278259,#278260,#278268,#278276)); +#278259 = ORIENTED_EDGE('',*,*,#278238,.T.); +#278260 = ORIENTED_EDGE('',*,*,#278261,.T.); +#278261 = EDGE_CURVE('',#278231,#278262,#278264,.T.); +#278262 = VERTEX_POINT('',#278263); +#278263 = CARTESIAN_POINT('',(129.849509,-66.018079,1.545)); +#278264 = LINE('',#278265,#278266); +#278265 = CARTESIAN_POINT('',(129.889392,-66.,1.545)); +#278266 = VECTOR('',#278267,1.); +#278267 = DIRECTION('',(-0.910793006305,-0.412863294161,0.)); +#278268 = ORIENTED_EDGE('',*,*,#278269,.F.); +#278269 = EDGE_CURVE('',#278270,#278262,#278272,.T.); +#278270 = VERTEX_POINT('',#278271); +#278271 = CARTESIAN_POINT('',(129.849509,-66.018079,1.51)); +#278272 = LINE('',#278273,#278274); +#278273 = CARTESIAN_POINT('',(129.849509,-66.018079,1.51)); +#278274 = VECTOR('',#278275,1.); +#278275 = DIRECTION('',(0.,0.,1.)); +#278276 = ORIENTED_EDGE('',*,*,#278277,.F.); +#278277 = EDGE_CURVE('',#278239,#278270,#278278,.T.); +#278278 = LINE('',#278279,#278280); +#278279 = CARTESIAN_POINT('',(129.889392,-66.,1.51)); +#278280 = VECTOR('',#278281,1.); +#278281 = DIRECTION('',(-0.910793006305,-0.412863294161,0.)); +#278282 = PLANE('',#278283); +#278283 = AXIS2_PLACEMENT_3D('',#278284,#278285,#278286); +#278284 = CARTESIAN_POINT('',(129.889392,-66.,1.51)); +#278285 = DIRECTION('',(0.412863294161,-0.910793006305,0.)); +#278286 = DIRECTION('',(-0.910793006305,-0.412863294161,0.)); +#278287 = ADVANCED_FACE('',(#278288),#278313,.T.); +#278288 = FACE_BOUND('',#278289,.T.); +#278289 = EDGE_LOOP('',(#278290,#278291,#278299,#278307)); +#278290 = ORIENTED_EDGE('',*,*,#278269,.T.); +#278291 = ORIENTED_EDGE('',*,*,#278292,.T.); +#278292 = EDGE_CURVE('',#278262,#278293,#278295,.T.); +#278293 = VERTEX_POINT('',#278294); +#278294 = CARTESIAN_POINT('',(128.021421,-66.02,1.545)); +#278295 = LINE('',#278296,#278297); +#278296 = CARTESIAN_POINT('',(129.849509,-66.018079,1.545)); +#278297 = VECTOR('',#278298,1.); +#278298 = DIRECTION('',(-0.999999447884,-1.050824106597E-03,0.)); +#278299 = ORIENTED_EDGE('',*,*,#278300,.F.); +#278300 = EDGE_CURVE('',#278301,#278293,#278303,.T.); +#278301 = VERTEX_POINT('',#278302); +#278302 = CARTESIAN_POINT('',(128.021421,-66.02,1.51)); +#278303 = LINE('',#278304,#278305); +#278304 = CARTESIAN_POINT('',(128.021421,-66.02,1.51)); +#278305 = VECTOR('',#278306,1.); +#278306 = DIRECTION('',(0.,0.,1.)); +#278307 = ORIENTED_EDGE('',*,*,#278308,.F.); +#278308 = EDGE_CURVE('',#278270,#278301,#278309,.T.); +#278309 = LINE('',#278310,#278311); +#278310 = CARTESIAN_POINT('',(129.849509,-66.018079,1.51)); +#278311 = VECTOR('',#278312,1.); +#278312 = DIRECTION('',(-0.999999447884,-1.050824106597E-03,0.)); +#278313 = PLANE('',#278314); +#278314 = AXIS2_PLACEMENT_3D('',#278315,#278316,#278317); +#278315 = CARTESIAN_POINT('',(129.849509,-66.018079,1.51)); +#278316 = DIRECTION('',(1.050824106597E-03,-0.999999447884,0.)); +#278317 = DIRECTION('',(-0.999999447884,-1.050824106597E-03,0.)); +#278318 = ADVANCED_FACE('',(#278319),#278344,.T.); +#278319 = FACE_BOUND('',#278320,.T.); +#278320 = EDGE_LOOP('',(#278321,#278322,#278330,#278338)); +#278321 = ORIENTED_EDGE('',*,*,#278300,.T.); +#278322 = ORIENTED_EDGE('',*,*,#278323,.T.); +#278323 = EDGE_CURVE('',#278293,#278324,#278326,.T.); +#278324 = VERTEX_POINT('',#278325); +#278325 = CARTESIAN_POINT('',(127.555557,-66.483147,1.545)); +#278326 = LINE('',#278327,#278328); +#278327 = CARTESIAN_POINT('',(128.021421,-66.02,1.545)); +#278328 = VECTOR('',#278329,1.); +#278329 = DIRECTION('',(-0.709171763762,-0.7050357505,0.)); +#278330 = ORIENTED_EDGE('',*,*,#278331,.F.); +#278331 = EDGE_CURVE('',#278332,#278324,#278334,.T.); +#278332 = VERTEX_POINT('',#278333); +#278333 = CARTESIAN_POINT('',(127.555557,-66.483147,1.51)); +#278334 = LINE('',#278335,#278336); +#278335 = CARTESIAN_POINT('',(127.555557,-66.483147,1.51)); +#278336 = VECTOR('',#278337,1.); +#278337 = DIRECTION('',(0.,0.,1.)); +#278338 = ORIENTED_EDGE('',*,*,#278339,.F.); +#278339 = EDGE_CURVE('',#278301,#278332,#278340,.T.); +#278340 = LINE('',#278341,#278342); +#278341 = CARTESIAN_POINT('',(128.021421,-66.02,1.51)); +#278342 = VECTOR('',#278343,1.); +#278343 = DIRECTION('',(-0.709171763762,-0.7050357505,0.)); +#278344 = PLANE('',#278345); +#278345 = AXIS2_PLACEMENT_3D('',#278346,#278347,#278348); +#278346 = CARTESIAN_POINT('',(128.021421,-66.02,1.51)); +#278347 = DIRECTION('',(0.7050357505,-0.709171763762,0.)); +#278348 = DIRECTION('',(-0.709171763762,-0.7050357505,0.)); +#278349 = ADVANCED_FACE('',(#278350),#278375,.T.); +#278350 = FACE_BOUND('',#278351,.T.); +#278351 = EDGE_LOOP('',(#278352,#278353,#278361,#278369)); +#278352 = ORIENTED_EDGE('',*,*,#278331,.T.); +#278353 = ORIENTED_EDGE('',*,*,#278354,.T.); +#278354 = EDGE_CURVE('',#278324,#278355,#278357,.T.); +#278355 = VERTEX_POINT('',#278356); +#278356 = CARTESIAN_POINT('',(127.519509,-66.498079,1.545)); +#278357 = LINE('',#278358,#278359); +#278358 = CARTESIAN_POINT('',(127.555557,-66.483147,1.545)); +#278359 = VECTOR('',#278360,1.); +#278360 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#278361 = ORIENTED_EDGE('',*,*,#278362,.F.); +#278362 = EDGE_CURVE('',#278363,#278355,#278365,.T.); +#278363 = VERTEX_POINT('',#278364); +#278364 = CARTESIAN_POINT('',(127.519509,-66.498079,1.51)); +#278365 = LINE('',#278366,#278367); +#278366 = CARTESIAN_POINT('',(127.519509,-66.498079,1.51)); +#278367 = VECTOR('',#278368,1.); +#278368 = DIRECTION('',(0.,0.,1.)); +#278369 = ORIENTED_EDGE('',*,*,#278370,.F.); +#278370 = EDGE_CURVE('',#278332,#278363,#278371,.T.); +#278371 = LINE('',#278372,#278373); +#278372 = CARTESIAN_POINT('',(127.555557,-66.483147,1.51)); +#278373 = VECTOR('',#278374,1.); +#278374 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#278375 = PLANE('',#278376); +#278376 = AXIS2_PLACEMENT_3D('',#278377,#278378,#278379); +#278377 = CARTESIAN_POINT('',(127.555557,-66.483147,1.51)); +#278378 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#278379 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#278380 = ADVANCED_FACE('',(#278381),#278406,.T.); +#278381 = FACE_BOUND('',#278382,.T.); +#278382 = EDGE_LOOP('',(#278383,#278384,#278392,#278400)); +#278383 = ORIENTED_EDGE('',*,*,#278362,.T.); +#278384 = ORIENTED_EDGE('',*,*,#278385,.T.); +#278385 = EDGE_CURVE('',#278355,#278386,#278388,.T.); +#278386 = VERTEX_POINT('',#278387); +#278387 = CARTESIAN_POINT('',(127.480491,-66.498079,1.545)); +#278388 = LINE('',#278389,#278390); +#278389 = CARTESIAN_POINT('',(127.519509,-66.498079,1.545)); +#278390 = VECTOR('',#278391,1.); +#278391 = DIRECTION('',(-1.,0.,0.)); +#278392 = ORIENTED_EDGE('',*,*,#278393,.F.); +#278393 = EDGE_CURVE('',#278394,#278386,#278396,.T.); +#278394 = VERTEX_POINT('',#278395); +#278395 = CARTESIAN_POINT('',(127.480491,-66.498079,1.51)); +#278396 = LINE('',#278397,#278398); +#278397 = CARTESIAN_POINT('',(127.480491,-66.498079,1.51)); +#278398 = VECTOR('',#278399,1.); +#278399 = DIRECTION('',(0.,0.,1.)); +#278400 = ORIENTED_EDGE('',*,*,#278401,.F.); +#278401 = EDGE_CURVE('',#278363,#278394,#278402,.T.); +#278402 = LINE('',#278403,#278404); +#278403 = CARTESIAN_POINT('',(127.519509,-66.498079,1.51)); +#278404 = VECTOR('',#278405,1.); +#278405 = DIRECTION('',(-1.,0.,0.)); +#278406 = PLANE('',#278407); +#278407 = AXIS2_PLACEMENT_3D('',#278408,#278409,#278410); +#278408 = CARTESIAN_POINT('',(127.519509,-66.498079,1.51)); +#278409 = DIRECTION('',(0.,-1.,0.)); +#278410 = DIRECTION('',(-1.,0.,0.)); +#278411 = ADVANCED_FACE('',(#278412),#278437,.T.); +#278412 = FACE_BOUND('',#278413,.T.); +#278413 = EDGE_LOOP('',(#278414,#278415,#278423,#278431)); +#278414 = ORIENTED_EDGE('',*,*,#278393,.T.); +#278415 = ORIENTED_EDGE('',*,*,#278416,.T.); +#278416 = EDGE_CURVE('',#278386,#278417,#278419,.T.); +#278417 = VERTEX_POINT('',#278418); +#278418 = CARTESIAN_POINT('',(127.454222,-66.487198,1.545)); +#278419 = LINE('',#278420,#278421); +#278420 = CARTESIAN_POINT('',(127.480491,-66.498079,1.545)); +#278421 = VECTOR('',#278422,1.); +#278422 = DIRECTION('',(-0.923879234954,0.38268415073,0.)); +#278423 = ORIENTED_EDGE('',*,*,#278424,.F.); +#278424 = EDGE_CURVE('',#278425,#278417,#278427,.T.); +#278425 = VERTEX_POINT('',#278426); +#278426 = CARTESIAN_POINT('',(127.454222,-66.487198,1.51)); +#278427 = LINE('',#278428,#278429); +#278428 = CARTESIAN_POINT('',(127.454222,-66.487198,1.51)); +#278429 = VECTOR('',#278430,1.); +#278430 = DIRECTION('',(0.,0.,1.)); +#278431 = ORIENTED_EDGE('',*,*,#278432,.F.); +#278432 = EDGE_CURVE('',#278394,#278425,#278433,.T.); +#278433 = LINE('',#278434,#278435); +#278434 = CARTESIAN_POINT('',(127.480491,-66.498079,1.51)); +#278435 = VECTOR('',#278436,1.); +#278436 = DIRECTION('',(-0.923879234954,0.38268415073,0.)); +#278437 = PLANE('',#278438); +#278438 = AXIS2_PLACEMENT_3D('',#278439,#278440,#278441); +#278439 = CARTESIAN_POINT('',(127.480491,-66.498079,1.51)); +#278440 = DIRECTION('',(-0.38268415073,-0.923879234954,0.)); +#278441 = DIRECTION('',(-0.923879234954,0.38268415073,0.)); +#278442 = ADVANCED_FACE('',(#278443),#278468,.T.); +#278443 = FACE_BOUND('',#278444,.T.); +#278444 = EDGE_LOOP('',(#278445,#278446,#278454,#278462)); +#278445 = ORIENTED_EDGE('',*,*,#278424,.T.); +#278446 = ORIENTED_EDGE('',*,*,#278447,.T.); +#278447 = EDGE_CURVE('',#278417,#278448,#278450,.T.); +#278448 = VERTEX_POINT('',#278449); +#278449 = CARTESIAN_POINT('',(126.455557,-67.483147,1.545)); +#278450 = LINE('',#278451,#278452); +#278451 = CARTESIAN_POINT('',(127.454222,-66.487198,1.545)); +#278452 = VECTOR('',#278453,1.); +#278453 = DIRECTION('',(-0.708068968706,-0.706143282596,0.)); +#278454 = ORIENTED_EDGE('',*,*,#278455,.F.); +#278455 = EDGE_CURVE('',#278456,#278448,#278458,.T.); +#278456 = VERTEX_POINT('',#278457); +#278457 = CARTESIAN_POINT('',(126.455557,-67.483147,1.51)); +#278458 = LINE('',#278459,#278460); +#278459 = CARTESIAN_POINT('',(126.455557,-67.483147,1.51)); +#278460 = VECTOR('',#278461,1.); +#278461 = DIRECTION('',(0.,0.,1.)); +#278462 = ORIENTED_EDGE('',*,*,#278463,.F.); +#278463 = EDGE_CURVE('',#278425,#278456,#278464,.T.); +#278464 = LINE('',#278465,#278466); +#278465 = CARTESIAN_POINT('',(127.454222,-66.487198,1.51)); +#278466 = VECTOR('',#278467,1.); +#278467 = DIRECTION('',(-0.708068968706,-0.706143282596,0.)); +#278468 = PLANE('',#278469); +#278469 = AXIS2_PLACEMENT_3D('',#278470,#278471,#278472); +#278470 = CARTESIAN_POINT('',(127.454222,-66.487198,1.51)); +#278471 = DIRECTION('',(0.706143282596,-0.708068968706,0.)); +#278472 = DIRECTION('',(-0.708068968706,-0.706143282596,0.)); +#278473 = ADVANCED_FACE('',(#278474),#278501,.T.); +#278474 = FACE_BOUND('',#278475,.T.); +#278475 = EDGE_LOOP('',(#278476,#278477,#278486,#278494)); +#278476 = ORIENTED_EDGE('',*,*,#278455,.T.); +#278477 = ORIENTED_EDGE('',*,*,#278478,.T.); +#278478 = EDGE_CURVE('',#278448,#278479,#278481,.T.); +#278479 = VERTEX_POINT('',#278480); +#278480 = CARTESIAN_POINT('',(126.324443,-67.483147,1.545)); +#278481 = CIRCLE('',#278482,0.12572947718); +#278482 = AXIS2_PLACEMENT_3D('',#278483,#278484,#278485); +#278483 = CARTESIAN_POINT('',(126.39,-67.37586148754,1.545)); +#278484 = DIRECTION('',(-0.,0.,-1.)); +#278485 = DIRECTION('',(0.521413128172,-0.853304371119,-0.)); +#278486 = ORIENTED_EDGE('',*,*,#278487,.F.); +#278487 = EDGE_CURVE('',#278488,#278479,#278490,.T.); +#278488 = VERTEX_POINT('',#278489); +#278489 = CARTESIAN_POINT('',(126.324443,-67.483147,1.51)); +#278490 = LINE('',#278491,#278492); +#278491 = CARTESIAN_POINT('',(126.324443,-67.483147,1.51)); +#278492 = VECTOR('',#278493,1.); +#278493 = DIRECTION('',(0.,0.,1.)); +#278494 = ORIENTED_EDGE('',*,*,#278495,.F.); +#278495 = EDGE_CURVE('',#278456,#278488,#278496,.T.); +#278496 = CIRCLE('',#278497,0.12572947718); +#278497 = AXIS2_PLACEMENT_3D('',#278498,#278499,#278500); +#278498 = CARTESIAN_POINT('',(126.39,-67.37586148754,1.51)); +#278499 = DIRECTION('',(-0.,0.,-1.)); +#278500 = DIRECTION('',(0.521413128172,-0.853304371119,-0.)); +#278501 = CYLINDRICAL_SURFACE('',#278502,0.12572947718); +#278502 = AXIS2_PLACEMENT_3D('',#278503,#278504,#278505); +#278503 = CARTESIAN_POINT('',(126.39,-67.37586148754,1.51)); +#278504 = DIRECTION('',(-0.,0.,-1.)); +#278505 = DIRECTION('',(0.521413128172,-0.853304371119,-0.)); +#278506 = ADVANCED_FACE('',(#278507),#278532,.T.); +#278507 = FACE_BOUND('',#278508,.T.); +#278508 = EDGE_LOOP('',(#278509,#278510,#278518,#278526)); +#278509 = ORIENTED_EDGE('',*,*,#278487,.T.); +#278510 = ORIENTED_EDGE('',*,*,#278511,.T.); +#278511 = EDGE_CURVE('',#278479,#278512,#278514,.T.); +#278512 = VERTEX_POINT('',#278513); +#278513 = CARTESIAN_POINT('',(126.296853,-67.455557,1.545)); +#278514 = LINE('',#278515,#278516); +#278515 = CARTESIAN_POINT('',(126.324443,-67.483147,1.545)); +#278516 = VECTOR('',#278517,1.); +#278517 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278518 = ORIENTED_EDGE('',*,*,#278519,.F.); +#278519 = EDGE_CURVE('',#278520,#278512,#278522,.T.); +#278520 = VERTEX_POINT('',#278521); +#278521 = CARTESIAN_POINT('',(126.296853,-67.455557,1.51)); +#278522 = LINE('',#278523,#278524); +#278523 = CARTESIAN_POINT('',(126.296853,-67.455557,1.51)); +#278524 = VECTOR('',#278525,1.); +#278525 = DIRECTION('',(0.,0.,1.)); +#278526 = ORIENTED_EDGE('',*,*,#278527,.F.); +#278527 = EDGE_CURVE('',#278488,#278520,#278528,.T.); +#278528 = LINE('',#278529,#278530); +#278529 = CARTESIAN_POINT('',(126.324443,-67.483147,1.51)); +#278530 = VECTOR('',#278531,1.); +#278531 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278532 = PLANE('',#278533); +#278533 = AXIS2_PLACEMENT_3D('',#278534,#278535,#278536); +#278534 = CARTESIAN_POINT('',(126.324443,-67.483147,1.51)); +#278535 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#278536 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278537 = ADVANCED_FACE('',(#278538),#278565,.T.); +#278538 = FACE_BOUND('',#278539,.T.); +#278539 = EDGE_LOOP('',(#278540,#278541,#278550,#278558)); +#278540 = ORIENTED_EDGE('',*,*,#278519,.T.); +#278541 = ORIENTED_EDGE('',*,*,#278542,.T.); +#278542 = EDGE_CURVE('',#278512,#278543,#278545,.T.); +#278543 = VERTEX_POINT('',#278544); +#278544 = CARTESIAN_POINT('',(126.324443,-67.316853,1.545)); +#278545 = CIRCLE('',#278546,9.999896352767E-02); +#278546 = AXIS2_PLACEMENT_3D('',#278547,#278548,#278549); +#278547 = CARTESIAN_POINT('',(126.3799985356,-67.39999970871,1.545)); +#278548 = DIRECTION('',(0.,0.,-1.)); +#278549 = DIRECTION('',(-0.831463973974,-0.555578671282,-0.)); +#278550 = ORIENTED_EDGE('',*,*,#278551,.F.); +#278551 = EDGE_CURVE('',#278552,#278543,#278554,.T.); +#278552 = VERTEX_POINT('',#278553); +#278553 = CARTESIAN_POINT('',(126.324443,-67.316853,1.51)); +#278554 = LINE('',#278555,#278556); +#278555 = CARTESIAN_POINT('',(126.324443,-67.316853,1.51)); +#278556 = VECTOR('',#278557,1.); +#278557 = DIRECTION('',(0.,0.,1.)); +#278558 = ORIENTED_EDGE('',*,*,#278559,.F.); +#278559 = EDGE_CURVE('',#278520,#278552,#278560,.T.); +#278560 = CIRCLE('',#278561,9.999896352767E-02); +#278561 = AXIS2_PLACEMENT_3D('',#278562,#278563,#278564); +#278562 = CARTESIAN_POINT('',(126.3799985356,-67.39999970871,1.51)); +#278563 = DIRECTION('',(0.,0.,-1.)); +#278564 = DIRECTION('',(-0.831463973974,-0.555578671282,-0.)); +#278565 = CYLINDRICAL_SURFACE('',#278566,9.999896352767E-02); +#278566 = AXIS2_PLACEMENT_3D('',#278567,#278568,#278569); +#278567 = CARTESIAN_POINT('',(126.3799985356,-67.39999970871,1.51)); +#278568 = DIRECTION('',(0.,0.,-1.)); +#278569 = DIRECTION('',(-0.831463973974,-0.555578671282,-0.)); +#278570 = ADVANCED_FACE('',(#278571),#278596,.T.); +#278571 = FACE_BOUND('',#278572,.T.); +#278572 = EDGE_LOOP('',(#278573,#278574,#278582,#278590)); +#278573 = ORIENTED_EDGE('',*,*,#278551,.T.); +#278574 = ORIENTED_EDGE('',*,*,#278575,.T.); +#278575 = EDGE_CURVE('',#278543,#278576,#278578,.T.); +#278576 = VERTEX_POINT('',#278577); +#278577 = CARTESIAN_POINT('',(126.353945,-67.304632,1.545)); +#278578 = LINE('',#278579,#278580); +#278579 = CARTESIAN_POINT('',(126.324443,-67.316853,1.545)); +#278580 = VECTOR('',#278581,1.); +#278581 = DIRECTION('',(0.92386988342,0.382706726502,0.)); +#278582 = ORIENTED_EDGE('',*,*,#278583,.F.); +#278583 = EDGE_CURVE('',#278584,#278576,#278586,.T.); +#278584 = VERTEX_POINT('',#278585); +#278585 = CARTESIAN_POINT('',(126.353945,-67.304632,1.51)); +#278586 = LINE('',#278587,#278588); +#278587 = CARTESIAN_POINT('',(126.353945,-67.304632,1.51)); +#278588 = VECTOR('',#278589,1.); +#278589 = DIRECTION('',(0.,0.,1.)); +#278590 = ORIENTED_EDGE('',*,*,#278591,.F.); +#278591 = EDGE_CURVE('',#278552,#278584,#278592,.T.); +#278592 = LINE('',#278593,#278594); +#278593 = CARTESIAN_POINT('',(126.324443,-67.316853,1.51)); +#278594 = VECTOR('',#278595,1.); +#278595 = DIRECTION('',(0.92386988342,0.382706726502,0.)); +#278596 = PLANE('',#278597); +#278597 = AXIS2_PLACEMENT_3D('',#278598,#278599,#278600); +#278598 = CARTESIAN_POINT('',(126.324443,-67.316853,1.51)); +#278599 = DIRECTION('',(-0.382706726502,0.92386988342,0.)); +#278600 = DIRECTION('',(0.92386988342,0.382706726502,0.)); +#278601 = ADVANCED_FACE('',(#278602),#278627,.T.); +#278602 = FACE_BOUND('',#278603,.T.); +#278603 = EDGE_LOOP('',(#278604,#278605,#278613,#278621)); +#278604 = ORIENTED_EDGE('',*,*,#278583,.T.); +#278605 = ORIENTED_EDGE('',*,*,#278606,.T.); +#278606 = EDGE_CURVE('',#278576,#278607,#278609,.T.); +#278607 = VERTEX_POINT('',#278608); +#278608 = CARTESIAN_POINT('',(127.344443,-66.316852,1.545)); +#278609 = LINE('',#278610,#278611); +#278610 = CARTESIAN_POINT('',(126.353945,-67.304632,1.545)); +#278611 = VECTOR('',#278612,1.); +#278612 = DIRECTION('',(0.708077622564,0.706134605033,0.)); +#278613 = ORIENTED_EDGE('',*,*,#278614,.F.); +#278614 = EDGE_CURVE('',#278615,#278607,#278617,.T.); +#278615 = VERTEX_POINT('',#278616); +#278616 = CARTESIAN_POINT('',(127.344443,-66.316852,1.51)); +#278617 = LINE('',#278618,#278619); +#278618 = CARTESIAN_POINT('',(127.344443,-66.316852,1.51)); +#278619 = VECTOR('',#278620,1.); +#278620 = DIRECTION('',(0.,0.,1.)); +#278621 = ORIENTED_EDGE('',*,*,#278622,.F.); +#278622 = EDGE_CURVE('',#278584,#278615,#278623,.T.); +#278623 = LINE('',#278624,#278625); +#278624 = CARTESIAN_POINT('',(126.353945,-67.304632,1.51)); +#278625 = VECTOR('',#278626,1.); +#278626 = DIRECTION('',(0.708077622564,0.706134605033,0.)); +#278627 = PLANE('',#278628); +#278628 = AXIS2_PLACEMENT_3D('',#278629,#278630,#278631); +#278629 = CARTESIAN_POINT('',(126.353945,-67.304632,1.51)); +#278630 = DIRECTION('',(-0.706134605033,0.708077622564,0.)); +#278631 = DIRECTION('',(0.708077622564,0.706134605033,0.)); +#278632 = ADVANCED_FACE('',(#278633),#278658,.T.); +#278633 = FACE_BOUND('',#278634,.T.); +#278634 = EDGE_LOOP('',(#278635,#278636,#278644,#278652)); +#278635 = ORIENTED_EDGE('',*,*,#278614,.T.); +#278636 = ORIENTED_EDGE('',*,*,#278637,.T.); +#278637 = EDGE_CURVE('',#278607,#278638,#278640,.T.); +#278638 = VERTEX_POINT('',#278639); +#278639 = CARTESIAN_POINT('',(127.380491,-66.301921,1.545)); +#278640 = LINE('',#278641,#278642); +#278641 = CARTESIAN_POINT('',(127.344443,-66.316852,1.545)); +#278642 = VECTOR('',#278643,1.); +#278643 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278644 = ORIENTED_EDGE('',*,*,#278645,.F.); +#278645 = EDGE_CURVE('',#278646,#278638,#278648,.T.); +#278646 = VERTEX_POINT('',#278647); +#278647 = CARTESIAN_POINT('',(127.380491,-66.301921,1.51)); +#278648 = LINE('',#278649,#278650); +#278649 = CARTESIAN_POINT('',(127.380491,-66.301921,1.51)); +#278650 = VECTOR('',#278651,1.); +#278651 = DIRECTION('',(0.,0.,1.)); +#278652 = ORIENTED_EDGE('',*,*,#278653,.F.); +#278653 = EDGE_CURVE('',#278615,#278646,#278654,.T.); +#278654 = LINE('',#278655,#278656); +#278655 = CARTESIAN_POINT('',(127.344443,-66.316852,1.51)); +#278656 = VECTOR('',#278657,1.); +#278657 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278658 = PLANE('',#278659); +#278659 = AXIS2_PLACEMENT_3D('',#278660,#278661,#278662); +#278660 = CARTESIAN_POINT('',(127.344443,-66.316852,1.51)); +#278661 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#278662 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278663 = ADVANCED_FACE('',(#278664),#278689,.T.); +#278664 = FACE_BOUND('',#278665,.T.); +#278665 = EDGE_LOOP('',(#278666,#278667,#278675,#278683)); +#278666 = ORIENTED_EDGE('',*,*,#278645,.T.); +#278667 = ORIENTED_EDGE('',*,*,#278668,.T.); +#278668 = EDGE_CURVE('',#278638,#278669,#278671,.T.); +#278669 = VERTEX_POINT('',#278670); +#278670 = CARTESIAN_POINT('',(127.419509,-66.301921,1.545)); +#278671 = LINE('',#278672,#278673); +#278672 = CARTESIAN_POINT('',(127.380491,-66.301921,1.545)); +#278673 = VECTOR('',#278674,1.); +#278674 = DIRECTION('',(1.,0.,0.)); +#278675 = ORIENTED_EDGE('',*,*,#278676,.F.); +#278676 = EDGE_CURVE('',#278677,#278669,#278679,.T.); +#278677 = VERTEX_POINT('',#278678); +#278678 = CARTESIAN_POINT('',(127.419509,-66.301921,1.51)); +#278679 = LINE('',#278680,#278681); +#278680 = CARTESIAN_POINT('',(127.419509,-66.301921,1.51)); +#278681 = VECTOR('',#278682,1.); +#278682 = DIRECTION('',(0.,0.,1.)); +#278683 = ORIENTED_EDGE('',*,*,#278684,.F.); +#278684 = EDGE_CURVE('',#278646,#278677,#278685,.T.); +#278685 = LINE('',#278686,#278687); +#278686 = CARTESIAN_POINT('',(127.380491,-66.301921,1.51)); +#278687 = VECTOR('',#278688,1.); +#278688 = DIRECTION('',(1.,0.,0.)); +#278689 = PLANE('',#278690); +#278690 = AXIS2_PLACEMENT_3D('',#278691,#278692,#278693); +#278691 = CARTESIAN_POINT('',(127.380491,-66.301921,1.51)); +#278692 = DIRECTION('',(0.,1.,0.)); +#278693 = DIRECTION('',(1.,0.,0.)); +#278694 = ADVANCED_FACE('',(#278695),#278720,.T.); +#278695 = FACE_BOUND('',#278696,.T.); +#278696 = EDGE_LOOP('',(#278697,#278698,#278706,#278714)); +#278697 = ORIENTED_EDGE('',*,*,#278676,.T.); +#278698 = ORIENTED_EDGE('',*,*,#278699,.T.); +#278699 = EDGE_CURVE('',#278669,#278700,#278702,.T.); +#278700 = VERTEX_POINT('',#278701); +#278701 = CARTESIAN_POINT('',(127.445777,-66.3128,1.545)); +#278702 = LINE('',#278703,#278704); +#278703 = CARTESIAN_POINT('',(127.419509,-66.301921,1.545)); +#278704 = VECTOR('',#278705,1.); +#278705 = DIRECTION('',(0.923898953305,-0.382636543056,0.)); +#278706 = ORIENTED_EDGE('',*,*,#278707,.F.); +#278707 = EDGE_CURVE('',#278708,#278700,#278710,.T.); +#278708 = VERTEX_POINT('',#278709); +#278709 = CARTESIAN_POINT('',(127.445777,-66.3128,1.51)); +#278710 = LINE('',#278711,#278712); +#278711 = CARTESIAN_POINT('',(127.445777,-66.3128,1.51)); +#278712 = VECTOR('',#278713,1.); +#278713 = DIRECTION('',(0.,0.,1.)); +#278714 = ORIENTED_EDGE('',*,*,#278715,.F.); +#278715 = EDGE_CURVE('',#278677,#278708,#278716,.T.); +#278716 = LINE('',#278717,#278718); +#278717 = CARTESIAN_POINT('',(127.419509,-66.301921,1.51)); +#278718 = VECTOR('',#278719,1.); +#278719 = DIRECTION('',(0.923898953305,-0.382636543056,0.)); +#278720 = PLANE('',#278721); +#278721 = AXIS2_PLACEMENT_3D('',#278722,#278723,#278724); +#278722 = CARTESIAN_POINT('',(127.419509,-66.301921,1.51)); +#278723 = DIRECTION('',(0.382636543056,0.923898953305,-0.)); +#278724 = DIRECTION('',(0.923898953305,-0.382636543056,0.)); +#278725 = ADVANCED_FACE('',(#278726),#278751,.T.); +#278726 = FACE_BOUND('',#278727,.T.); +#278727 = EDGE_LOOP('',(#278728,#278729,#278737,#278745)); +#278728 = ORIENTED_EDGE('',*,*,#278707,.T.); +#278729 = ORIENTED_EDGE('',*,*,#278730,.T.); +#278730 = EDGE_CURVE('',#278700,#278731,#278733,.T.); +#278731 = VERTEX_POINT('',#278732); +#278732 = CARTESIAN_POINT('',(127.924443,-65.836852,1.545)); +#278733 = LINE('',#278734,#278735); +#278734 = CARTESIAN_POINT('',(127.445777,-66.3128,1.545)); +#278735 = VECTOR('',#278736,1.); +#278736 = DIRECTION('',(0.709117198376,0.70509063174,0.)); +#278737 = ORIENTED_EDGE('',*,*,#278738,.F.); +#278738 = EDGE_CURVE('',#278739,#278731,#278741,.T.); +#278739 = VERTEX_POINT('',#278740); +#278740 = CARTESIAN_POINT('',(127.924443,-65.836852,1.51)); +#278741 = LINE('',#278742,#278743); +#278742 = CARTESIAN_POINT('',(127.924443,-65.836852,1.51)); +#278743 = VECTOR('',#278744,1.); +#278744 = DIRECTION('',(0.,0.,1.)); +#278745 = ORIENTED_EDGE('',*,*,#278746,.F.); +#278746 = EDGE_CURVE('',#278708,#278739,#278747,.T.); +#278747 = LINE('',#278748,#278749); +#278748 = CARTESIAN_POINT('',(127.445777,-66.3128,1.51)); +#278749 = VECTOR('',#278750,1.); +#278750 = DIRECTION('',(0.709117198376,0.70509063174,0.)); +#278751 = PLANE('',#278752); +#278752 = AXIS2_PLACEMENT_3D('',#278753,#278754,#278755); +#278753 = CARTESIAN_POINT('',(127.445777,-66.3128,1.51)); +#278754 = DIRECTION('',(-0.70509063174,0.709117198376,0.)); +#278755 = DIRECTION('',(0.709117198376,0.70509063174,0.)); +#278756 = ADVANCED_FACE('',(#278757),#278782,.T.); +#278757 = FACE_BOUND('',#278758,.T.); +#278758 = EDGE_LOOP('',(#278759,#278760,#278768,#278776)); +#278759 = ORIENTED_EDGE('',*,*,#278738,.T.); +#278760 = ORIENTED_EDGE('',*,*,#278761,.T.); +#278761 = EDGE_CURVE('',#278731,#278762,#278764,.T.); +#278762 = VERTEX_POINT('',#278763); +#278763 = CARTESIAN_POINT('',(127.960491,-65.821921,1.545)); +#278764 = LINE('',#278765,#278766); +#278765 = CARTESIAN_POINT('',(127.924443,-65.836852,1.545)); +#278766 = VECTOR('',#278767,1.); +#278767 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278768 = ORIENTED_EDGE('',*,*,#278769,.F.); +#278769 = EDGE_CURVE('',#278770,#278762,#278772,.T.); +#278770 = VERTEX_POINT('',#278771); +#278771 = CARTESIAN_POINT('',(127.960491,-65.821921,1.51)); +#278772 = LINE('',#278773,#278774); +#278773 = CARTESIAN_POINT('',(127.960491,-65.821921,1.51)); +#278774 = VECTOR('',#278775,1.); +#278775 = DIRECTION('',(0.,0.,1.)); +#278776 = ORIENTED_EDGE('',*,*,#278777,.F.); +#278777 = EDGE_CURVE('',#278739,#278770,#278778,.T.); +#278778 = LINE('',#278779,#278780); +#278779 = CARTESIAN_POINT('',(127.924443,-65.836852,1.51)); +#278780 = VECTOR('',#278781,1.); +#278781 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278782 = PLANE('',#278783); +#278783 = AXIS2_PLACEMENT_3D('',#278784,#278785,#278786); +#278784 = CARTESIAN_POINT('',(127.924443,-65.836852,1.51)); +#278785 = DIRECTION('',(-0.382670952168,0.923884701879,0.)); +#278786 = DIRECTION('',(0.923884701879,0.382670952168,0.)); +#278787 = ADVANCED_FACE('',(#278788),#278813,.T.); +#278788 = FACE_BOUND('',#278789,.T.); +#278789 = EDGE_LOOP('',(#278790,#278791,#278799,#278807)); +#278790 = ORIENTED_EDGE('',*,*,#278769,.T.); +#278791 = ORIENTED_EDGE('',*,*,#278792,.T.); +#278792 = EDGE_CURVE('',#278762,#278793,#278795,.T.); +#278793 = VERTEX_POINT('',#278794); +#278794 = CARTESIAN_POINT('',(128.058579,-65.82,1.545)); +#278795 = LINE('',#278796,#278797); +#278796 = CARTESIAN_POINT('',(127.960491,-65.821921,1.545)); +#278797 = VECTOR('',#278798,1.); +#278798 = DIRECTION('',(0.999808279715,1.958070003815E-02,0.)); +#278799 = ORIENTED_EDGE('',*,*,#278800,.F.); +#278800 = EDGE_CURVE('',#278801,#278793,#278803,.T.); +#278801 = VERTEX_POINT('',#278802); +#278802 = CARTESIAN_POINT('',(128.058579,-65.82,1.51)); +#278803 = LINE('',#278804,#278805); +#278804 = CARTESIAN_POINT('',(128.058579,-65.82,1.51)); +#278805 = VECTOR('',#278806,1.); +#278806 = DIRECTION('',(0.,0.,1.)); +#278807 = ORIENTED_EDGE('',*,*,#278808,.F.); +#278808 = EDGE_CURVE('',#278770,#278801,#278809,.T.); +#278809 = LINE('',#278810,#278811); +#278810 = CARTESIAN_POINT('',(127.960491,-65.821921,1.51)); +#278811 = VECTOR('',#278812,1.); +#278812 = DIRECTION('',(0.999808279715,1.958070003815E-02,0.)); +#278813 = PLANE('',#278814); +#278814 = AXIS2_PLACEMENT_3D('',#278815,#278816,#278817); +#278815 = CARTESIAN_POINT('',(127.960491,-65.821921,1.51)); +#278816 = DIRECTION('',(-1.958070003815E-02,0.999808279715,0.)); +#278817 = DIRECTION('',(0.999808279715,1.958070003815E-02,0.)); +#278818 = ADVANCED_FACE('',(#278819),#278844,.T.); +#278819 = FACE_BOUND('',#278820,.T.); +#278820 = EDGE_LOOP('',(#278821,#278822,#278830,#278838)); +#278821 = ORIENTED_EDGE('',*,*,#278800,.T.); +#278822 = ORIENTED_EDGE('',*,*,#278823,.T.); +#278823 = EDGE_CURVE('',#278793,#278824,#278826,.T.); +#278824 = VERTEX_POINT('',#278825); +#278825 = CARTESIAN_POINT('',(127.698578,-65.46,1.545)); +#278826 = LINE('',#278827,#278828); +#278827 = CARTESIAN_POINT('',(128.058579,-65.82,1.545)); +#278828 = VECTOR('',#278829,1.); +#278829 = DIRECTION('',(-0.707107763277,0.707105799094,0.)); +#278830 = ORIENTED_EDGE('',*,*,#278831,.F.); +#278831 = EDGE_CURVE('',#278832,#278824,#278834,.T.); +#278832 = VERTEX_POINT('',#278833); +#278833 = CARTESIAN_POINT('',(127.698578,-65.46,1.51)); +#278834 = LINE('',#278835,#278836); +#278835 = CARTESIAN_POINT('',(127.698578,-65.46,1.51)); +#278836 = VECTOR('',#278837,1.); +#278837 = DIRECTION('',(0.,0.,1.)); +#278838 = ORIENTED_EDGE('',*,*,#278839,.F.); +#278839 = EDGE_CURVE('',#278801,#278832,#278840,.T.); +#278840 = LINE('',#278841,#278842); +#278841 = CARTESIAN_POINT('',(128.058579,-65.82,1.51)); +#278842 = VECTOR('',#278843,1.); +#278843 = DIRECTION('',(-0.707107763277,0.707105799094,0.)); +#278844 = PLANE('',#278845); +#278845 = AXIS2_PLACEMENT_3D('',#278846,#278847,#278848); +#278846 = CARTESIAN_POINT('',(128.058579,-65.82,1.51)); +#278847 = DIRECTION('',(-0.707105799094,-0.707107763277,0.)); +#278848 = DIRECTION('',(-0.707107763277,0.707105799094,0.)); +#278849 = ADVANCED_FACE('',(#278850),#278875,.T.); +#278850 = FACE_BOUND('',#278851,.T.); +#278851 = EDGE_LOOP('',(#278852,#278853,#278861,#278869)); +#278852 = ORIENTED_EDGE('',*,*,#278831,.T.); +#278853 = ORIENTED_EDGE('',*,*,#278854,.T.); +#278854 = EDGE_CURVE('',#278824,#278855,#278857,.T.); +#278855 = VERTEX_POINT('',#278856); +#278856 = CARTESIAN_POINT('',(126.790491,-65.458079,1.545)); +#278857 = LINE('',#278858,#278859); +#278858 = CARTESIAN_POINT('',(127.698578,-65.46,1.545)); +#278859 = VECTOR('',#278860,1.); +#278860 = DIRECTION('',(-0.999997762473,2.115431342708E-03,0.)); +#278861 = ORIENTED_EDGE('',*,*,#278862,.F.); +#278862 = EDGE_CURVE('',#278863,#278855,#278865,.T.); +#278863 = VERTEX_POINT('',#278864); +#278864 = CARTESIAN_POINT('',(126.790491,-65.458079,1.51)); +#278865 = LINE('',#278866,#278867); +#278866 = CARTESIAN_POINT('',(126.790491,-65.458079,1.51)); +#278867 = VECTOR('',#278868,1.); +#278868 = DIRECTION('',(0.,0.,1.)); +#278869 = ORIENTED_EDGE('',*,*,#278870,.F.); +#278870 = EDGE_CURVE('',#278832,#278863,#278871,.T.); +#278871 = LINE('',#278872,#278873); +#278872 = CARTESIAN_POINT('',(127.698578,-65.46,1.51)); +#278873 = VECTOR('',#278874,1.); +#278874 = DIRECTION('',(-0.999997762473,2.115431342708E-03,0.)); +#278875 = PLANE('',#278876); +#278876 = AXIS2_PLACEMENT_3D('',#278877,#278878,#278879); +#278877 = CARTESIAN_POINT('',(127.698578,-65.46,1.51)); +#278878 = DIRECTION('',(-2.115431342708E-03,-0.999997762473,0.)); +#278879 = DIRECTION('',(-0.999997762473,2.115431342708E-03,0.)); +#278880 = ADVANCED_FACE('',(#278881),#278906,.T.); +#278881 = FACE_BOUND('',#278882,.T.); +#278882 = EDGE_LOOP('',(#278883,#278884,#278892,#278900)); +#278883 = ORIENTED_EDGE('',*,*,#278862,.T.); +#278884 = ORIENTED_EDGE('',*,*,#278885,.T.); +#278885 = EDGE_CURVE('',#278855,#278886,#278888,.T.); +#278886 = VERTEX_POINT('',#278887); +#278887 = CARTESIAN_POINT('',(126.754443,-65.443147,1.545)); +#278888 = LINE('',#278889,#278890); +#278889 = CARTESIAN_POINT('',(126.790491,-65.458079,1.545)); +#278890 = VECTOR('',#278891,1.); +#278891 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#278892 = ORIENTED_EDGE('',*,*,#278893,.F.); +#278893 = EDGE_CURVE('',#278894,#278886,#278896,.T.); +#278894 = VERTEX_POINT('',#278895); +#278895 = CARTESIAN_POINT('',(126.754443,-65.443147,1.51)); +#278896 = LINE('',#278897,#278898); +#278897 = CARTESIAN_POINT('',(126.754443,-65.443147,1.51)); +#278898 = VECTOR('',#278899,1.); +#278899 = DIRECTION('',(0.,0.,1.)); +#278900 = ORIENTED_EDGE('',*,*,#278901,.F.); +#278901 = EDGE_CURVE('',#278863,#278894,#278902,.T.); +#278902 = LINE('',#278903,#278904); +#278903 = CARTESIAN_POINT('',(126.790491,-65.458079,1.51)); +#278904 = VECTOR('',#278905,1.); +#278905 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#278906 = PLANE('',#278907); +#278907 = AXIS2_PLACEMENT_3D('',#278908,#278909,#278910); +#278908 = CARTESIAN_POINT('',(126.790491,-65.458079,1.51)); +#278909 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#278910 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#278911 = ADVANCED_FACE('',(#278912),#278937,.T.); +#278912 = FACE_BOUND('',#278913,.T.); +#278913 = EDGE_LOOP('',(#278914,#278915,#278923,#278931)); +#278914 = ORIENTED_EDGE('',*,*,#278893,.T.); +#278915 = ORIENTED_EDGE('',*,*,#278916,.T.); +#278916 = EDGE_CURVE('',#278886,#278917,#278919,.T.); +#278917 = VERTEX_POINT('',#278918); +#278918 = CARTESIAN_POINT('',(126.066853,-64.755557,1.545)); +#278919 = LINE('',#278920,#278921); +#278920 = CARTESIAN_POINT('',(126.754443,-65.443147,1.545)); +#278921 = VECTOR('',#278922,1.); +#278922 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278923 = ORIENTED_EDGE('',*,*,#278924,.F.); +#278924 = EDGE_CURVE('',#278925,#278917,#278927,.T.); +#278925 = VERTEX_POINT('',#278926); +#278926 = CARTESIAN_POINT('',(126.066853,-64.755557,1.51)); +#278927 = LINE('',#278928,#278929); +#278928 = CARTESIAN_POINT('',(126.066853,-64.755557,1.51)); +#278929 = VECTOR('',#278930,1.); +#278930 = DIRECTION('',(0.,0.,1.)); +#278931 = ORIENTED_EDGE('',*,*,#278932,.F.); +#278932 = EDGE_CURVE('',#278894,#278925,#278933,.T.); +#278933 = LINE('',#278934,#278935); +#278934 = CARTESIAN_POINT('',(126.754443,-65.443147,1.51)); +#278935 = VECTOR('',#278936,1.); +#278936 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278937 = PLANE('',#278938); +#278938 = AXIS2_PLACEMENT_3D('',#278939,#278940,#278941); +#278939 = CARTESIAN_POINT('',(126.754443,-65.443147,1.51)); +#278940 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#278941 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#278942 = ADVANCED_FACE('',(#278943),#278970,.T.); +#278943 = FACE_BOUND('',#278944,.T.); +#278944 = EDGE_LOOP('',(#278945,#278946,#278955,#278963)); +#278945 = ORIENTED_EDGE('',*,*,#278924,.T.); +#278946 = ORIENTED_EDGE('',*,*,#278947,.T.); +#278947 = EDGE_CURVE('',#278917,#278948,#278950,.T.); +#278948 = VERTEX_POINT('',#278949); +#278949 = CARTESIAN_POINT('',(126.066853,-64.644443,1.545)); +#278950 = CIRCLE('',#278951,9.999758414122E-02); +#278951 = AXIS2_PLACEMENT_3D('',#278952,#278953,#278954); +#278952 = CARTESIAN_POINT('',(126.14999707125,-64.7,1.545)); +#278953 = DIRECTION('',(0.,0.,-1.)); +#278954 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#278955 = ORIENTED_EDGE('',*,*,#278956,.F.); +#278956 = EDGE_CURVE('',#278957,#278948,#278959,.T.); +#278957 = VERTEX_POINT('',#278958); +#278958 = CARTESIAN_POINT('',(126.066853,-64.644443,1.51)); +#278959 = LINE('',#278960,#278961); +#278960 = CARTESIAN_POINT('',(126.066853,-64.644443,1.51)); +#278961 = VECTOR('',#278962,1.); +#278962 = DIRECTION('',(0.,0.,1.)); +#278963 = ORIENTED_EDGE('',*,*,#278964,.F.); +#278964 = EDGE_CURVE('',#278925,#278957,#278965,.T.); +#278965 = CIRCLE('',#278966,9.999758414122E-02); +#278966 = AXIS2_PLACEMENT_3D('',#278967,#278968,#278969); +#278967 = CARTESIAN_POINT('',(126.14999707125,-64.7,1.51)); +#278968 = DIRECTION('',(0.,0.,-1.)); +#278969 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#278970 = CYLINDRICAL_SURFACE('',#278971,9.999758414122E-02); +#278971 = AXIS2_PLACEMENT_3D('',#278972,#278973,#278974); +#278972 = CARTESIAN_POINT('',(126.14999707125,-64.7,1.51)); +#278973 = DIRECTION('',(0.,0.,-1.)); +#278974 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#278975 = ADVANCED_FACE('',(#278976),#278992,.T.); +#278976 = FACE_BOUND('',#278977,.T.); +#278977 = EDGE_LOOP('',(#278978,#278979,#278985,#278986)); +#278978 = ORIENTED_EDGE('',*,*,#278956,.T.); +#278979 = ORIENTED_EDGE('',*,*,#278980,.T.); +#278980 = EDGE_CURVE('',#278948,#277847,#278981,.T.); +#278981 = LINE('',#278982,#278983); +#278982 = CARTESIAN_POINT('',(126.066853,-64.644443,1.545)); +#278983 = VECTOR('',#278984,1.); +#278984 = DIRECTION('',(0.707104211557,0.707109350807,0.)); +#278985 = ORIENTED_EDGE('',*,*,#277844,.F.); +#278986 = ORIENTED_EDGE('',*,*,#278987,.F.); +#278987 = EDGE_CURVE('',#278957,#277845,#278988,.T.); +#278988 = LINE('',#278989,#278990); +#278989 = CARTESIAN_POINT('',(126.066853,-64.644443,1.51)); +#278990 = VECTOR('',#278991,1.); +#278991 = DIRECTION('',(0.707104211557,0.707109350807,0.)); +#278992 = PLANE('',#278993); +#278993 = AXIS2_PLACEMENT_3D('',#278994,#278995,#278996); +#278994 = CARTESIAN_POINT('',(126.066853,-64.644443,1.51)); +#278995 = DIRECTION('',(-0.707109350807,0.707104211557,0.)); +#278996 = DIRECTION('',(0.707104211557,0.707109350807,0.)); +#278997 = ADVANCED_FACE('',(#278998),#279025,.F.); +#278998 = FACE_BOUND('',#278999,.T.); +#278999 = EDGE_LOOP('',(#279000,#279010,#279017,#279018)); +#279000 = ORIENTED_EDGE('',*,*,#279001,.T.); +#279001 = EDGE_CURVE('',#279002,#279004,#279006,.T.); +#279002 = VERTEX_POINT('',#279003); +#279003 = CARTESIAN_POINT('',(130.937255,-65.9,1.51)); +#279004 = VERTEX_POINT('',#279005); +#279005 = CARTESIAN_POINT('',(130.937255,-65.9,1.545)); +#279006 = LINE('',#279007,#279008); +#279007 = CARTESIAN_POINT('',(130.937255,-65.9,1.51)); +#279008 = VECTOR('',#279009,1.); +#279009 = DIRECTION('',(0.,0.,1.)); +#279010 = ORIENTED_EDGE('',*,*,#279011,.T.); +#279011 = EDGE_CURVE('',#279004,#279004,#279012,.T.); +#279012 = CIRCLE('',#279013,0.137255); +#279013 = AXIS2_PLACEMENT_3D('',#279014,#279015,#279016); +#279014 = CARTESIAN_POINT('',(130.8,-65.9,1.545)); +#279015 = DIRECTION('',(0.,0.,1.)); +#279016 = DIRECTION('',(1.,0.,-0.)); +#279017 = ORIENTED_EDGE('',*,*,#279001,.F.); +#279018 = ORIENTED_EDGE('',*,*,#279019,.F.); +#279019 = EDGE_CURVE('',#279002,#279002,#279020,.T.); +#279020 = CIRCLE('',#279021,0.137255); +#279021 = AXIS2_PLACEMENT_3D('',#279022,#279023,#279024); +#279022 = CARTESIAN_POINT('',(130.8,-65.9,1.51)); +#279023 = DIRECTION('',(0.,0.,1.)); +#279024 = DIRECTION('',(1.,0.,-0.)); +#279025 = CYLINDRICAL_SURFACE('',#279026,0.137255); +#279026 = AXIS2_PLACEMENT_3D('',#279027,#279028,#279029); +#279027 = CARTESIAN_POINT('',(130.8,-65.9,1.51)); +#279028 = DIRECTION('',(-0.,-0.,-1.)); +#279029 = DIRECTION('',(1.,0.,-0.)); +#279030 = ADVANCED_FACE('',(#279031,#279070),#279073,.F.); +#279031 = FACE_BOUND('',#279032,.T.); +#279032 = EDGE_LOOP('',(#279033,#279034,#279035,#279036,#279037,#279038, + #279039,#279040,#279041,#279042,#279043,#279044,#279045,#279046, + #279047,#279048,#279049,#279050,#279051,#279052,#279053,#279054, + #279055,#279056,#279057,#279058,#279059,#279060,#279061,#279062, + #279063,#279064,#279065,#279066,#279067,#279068,#279069)); +#279033 = ORIENTED_EDGE('',*,*,#277871,.T.); +#279034 = ORIENTED_EDGE('',*,*,#277903,.T.); +#279035 = ORIENTED_EDGE('',*,*,#277934,.T.); +#279036 = ORIENTED_EDGE('',*,*,#277965,.T.); +#279037 = ORIENTED_EDGE('',*,*,#277996,.T.); +#279038 = ORIENTED_EDGE('',*,*,#278027,.T.); +#279039 = ORIENTED_EDGE('',*,*,#278058,.T.); +#279040 = ORIENTED_EDGE('',*,*,#278089,.T.); +#279041 = ORIENTED_EDGE('',*,*,#278120,.T.); +#279042 = ORIENTED_EDGE('',*,*,#278151,.T.); +#279043 = ORIENTED_EDGE('',*,*,#278183,.T.); +#279044 = ORIENTED_EDGE('',*,*,#278215,.T.); +#279045 = ORIENTED_EDGE('',*,*,#278246,.T.); +#279046 = ORIENTED_EDGE('',*,*,#278277,.T.); +#279047 = ORIENTED_EDGE('',*,*,#278308,.T.); +#279048 = ORIENTED_EDGE('',*,*,#278339,.T.); +#279049 = ORIENTED_EDGE('',*,*,#278370,.T.); +#279050 = ORIENTED_EDGE('',*,*,#278401,.T.); +#279051 = ORIENTED_EDGE('',*,*,#278432,.T.); +#279052 = ORIENTED_EDGE('',*,*,#278463,.T.); +#279053 = ORIENTED_EDGE('',*,*,#278495,.T.); +#279054 = ORIENTED_EDGE('',*,*,#278527,.T.); +#279055 = ORIENTED_EDGE('',*,*,#278559,.T.); +#279056 = ORIENTED_EDGE('',*,*,#278591,.T.); +#279057 = ORIENTED_EDGE('',*,*,#278622,.T.); +#279058 = ORIENTED_EDGE('',*,*,#278653,.T.); +#279059 = ORIENTED_EDGE('',*,*,#278684,.T.); +#279060 = ORIENTED_EDGE('',*,*,#278715,.T.); +#279061 = ORIENTED_EDGE('',*,*,#278746,.T.); +#279062 = ORIENTED_EDGE('',*,*,#278777,.T.); +#279063 = ORIENTED_EDGE('',*,*,#278808,.T.); +#279064 = ORIENTED_EDGE('',*,*,#278839,.T.); +#279065 = ORIENTED_EDGE('',*,*,#278870,.T.); +#279066 = ORIENTED_EDGE('',*,*,#278901,.T.); +#279067 = ORIENTED_EDGE('',*,*,#278932,.T.); +#279068 = ORIENTED_EDGE('',*,*,#278964,.T.); +#279069 = ORIENTED_EDGE('',*,*,#278987,.T.); +#279070 = FACE_BOUND('',#279071,.T.); +#279071 = EDGE_LOOP('',(#279072)); +#279072 = ORIENTED_EDGE('',*,*,#279019,.T.); +#279073 = PLANE('',#279074); +#279074 = AXIS2_PLACEMENT_3D('',#279075,#279076,#279077); +#279075 = CARTESIAN_POINT('',(0.,0.,1.51)); +#279076 = DIRECTION('',(0.,0.,1.)); +#279077 = DIRECTION('',(1.,0.,-0.)); +#279078 = ADVANCED_FACE('',(#279079,#279118),#279121,.T.); +#279079 = FACE_BOUND('',#279080,.F.); +#279080 = EDGE_LOOP('',(#279081,#279082,#279083,#279084,#279085,#279086, + #279087,#279088,#279089,#279090,#279091,#279092,#279093,#279094, + #279095,#279096,#279097,#279098,#279099,#279100,#279101,#279102, + #279103,#279104,#279105,#279106,#279107,#279108,#279109,#279110, + #279111,#279112,#279113,#279114,#279115,#279116,#279117)); +#279081 = ORIENTED_EDGE('',*,*,#277854,.T.); +#279082 = ORIENTED_EDGE('',*,*,#277887,.T.); +#279083 = ORIENTED_EDGE('',*,*,#277918,.T.); +#279084 = ORIENTED_EDGE('',*,*,#277949,.T.); +#279085 = ORIENTED_EDGE('',*,*,#277980,.T.); +#279086 = ORIENTED_EDGE('',*,*,#278011,.T.); +#279087 = ORIENTED_EDGE('',*,*,#278042,.T.); +#279088 = ORIENTED_EDGE('',*,*,#278073,.T.); +#279089 = ORIENTED_EDGE('',*,*,#278104,.T.); +#279090 = ORIENTED_EDGE('',*,*,#278135,.T.); +#279091 = ORIENTED_EDGE('',*,*,#278166,.T.); +#279092 = ORIENTED_EDGE('',*,*,#278199,.T.); +#279093 = ORIENTED_EDGE('',*,*,#278230,.T.); +#279094 = ORIENTED_EDGE('',*,*,#278261,.T.); +#279095 = ORIENTED_EDGE('',*,*,#278292,.T.); +#279096 = ORIENTED_EDGE('',*,*,#278323,.T.); +#279097 = ORIENTED_EDGE('',*,*,#278354,.T.); +#279098 = ORIENTED_EDGE('',*,*,#278385,.T.); +#279099 = ORIENTED_EDGE('',*,*,#278416,.T.); +#279100 = ORIENTED_EDGE('',*,*,#278447,.T.); +#279101 = ORIENTED_EDGE('',*,*,#278478,.T.); +#279102 = ORIENTED_EDGE('',*,*,#278511,.T.); +#279103 = ORIENTED_EDGE('',*,*,#278542,.T.); +#279104 = ORIENTED_EDGE('',*,*,#278575,.T.); +#279105 = ORIENTED_EDGE('',*,*,#278606,.T.); +#279106 = ORIENTED_EDGE('',*,*,#278637,.T.); +#279107 = ORIENTED_EDGE('',*,*,#278668,.T.); +#279108 = ORIENTED_EDGE('',*,*,#278699,.T.); +#279109 = ORIENTED_EDGE('',*,*,#278730,.T.); +#279110 = ORIENTED_EDGE('',*,*,#278761,.T.); +#279111 = ORIENTED_EDGE('',*,*,#278792,.T.); +#279112 = ORIENTED_EDGE('',*,*,#278823,.T.); +#279113 = ORIENTED_EDGE('',*,*,#278854,.T.); +#279114 = ORIENTED_EDGE('',*,*,#278885,.T.); +#279115 = ORIENTED_EDGE('',*,*,#278916,.T.); +#279116 = ORIENTED_EDGE('',*,*,#278947,.T.); +#279117 = ORIENTED_EDGE('',*,*,#278980,.T.); +#279118 = FACE_BOUND('',#279119,.F.); +#279119 = EDGE_LOOP('',(#279120)); +#279120 = ORIENTED_EDGE('',*,*,#279011,.T.); +#279121 = PLANE('',#279122); +#279122 = AXIS2_PLACEMENT_3D('',#279123,#279124,#279125); +#279123 = CARTESIAN_POINT('',(0.,0.,1.545)); +#279124 = DIRECTION('',(0.,0.,1.)); +#279125 = DIRECTION('',(1.,0.,-0.)); +#279126 = MANIFOLD_SOLID_BREP('',#279127); +#279127 = CLOSED_SHELL('',(#279128,#279161,#279194,#279206)); +#279128 = ADVANCED_FACE('',(#279129),#279156,.T.); +#279129 = FACE_BOUND('',#279130,.T.); +#279130 = EDGE_LOOP('',(#279131,#279141,#279148,#279149)); +#279131 = ORIENTED_EDGE('',*,*,#279132,.T.); +#279132 = EDGE_CURVE('',#279133,#279135,#279137,.T.); +#279133 = VERTEX_POINT('',#279134); +#279134 = CARTESIAN_POINT('',(151.8,-153.,0.)); +#279135 = VERTEX_POINT('',#279136); +#279136 = CARTESIAN_POINT('',(151.8,-153.,-3.5E-02)); +#279137 = LINE('',#279138,#279139); +#279138 = CARTESIAN_POINT('',(151.8,-153.,0.)); +#279139 = VECTOR('',#279140,1.); +#279140 = DIRECTION('',(0.,0.,-1.)); +#279141 = ORIENTED_EDGE('',*,*,#279142,.T.); +#279142 = EDGE_CURVE('',#279135,#279135,#279143,.T.); +#279143 = CIRCLE('',#279144,0.3); +#279144 = AXIS2_PLACEMENT_3D('',#279145,#279146,#279147); +#279145 = CARTESIAN_POINT('',(151.5,-153.,-3.5E-02)); +#279146 = DIRECTION('',(0.,0.,1.)); +#279147 = DIRECTION('',(1.,0.,-0.)); +#279148 = ORIENTED_EDGE('',*,*,#279132,.F.); +#279149 = ORIENTED_EDGE('',*,*,#279150,.F.); +#279150 = EDGE_CURVE('',#279133,#279133,#279151,.T.); +#279151 = CIRCLE('',#279152,0.3); +#279152 = AXIS2_PLACEMENT_3D('',#279153,#279154,#279155); +#279153 = CARTESIAN_POINT('',(151.5,-153.,0.)); +#279154 = DIRECTION('',(0.,0.,1.)); +#279155 = DIRECTION('',(1.,0.,-0.)); +#279156 = CYLINDRICAL_SURFACE('',#279157,0.3); +#279157 = AXIS2_PLACEMENT_3D('',#279158,#279159,#279160); +#279158 = CARTESIAN_POINT('',(151.5,-153.,0.)); +#279159 = DIRECTION('',(0.,0.,1.)); +#279160 = DIRECTION('',(1.,0.,-0.)); +#279161 = ADVANCED_FACE('',(#279162),#279189,.F.); +#279162 = FACE_BOUND('',#279163,.F.); +#279163 = EDGE_LOOP('',(#279164,#279174,#279181,#279182)); +#279164 = ORIENTED_EDGE('',*,*,#279165,.T.); +#279165 = EDGE_CURVE('',#279166,#279168,#279170,.T.); +#279166 = VERTEX_POINT('',#279167); +#279167 = CARTESIAN_POINT('',(151.637255,-153.,0.)); +#279168 = VERTEX_POINT('',#279169); +#279169 = CARTESIAN_POINT('',(151.637255,-153.,-3.5E-02)); +#279170 = LINE('',#279171,#279172); +#279171 = CARTESIAN_POINT('',(151.637255,-153.,0.)); +#279172 = VECTOR('',#279173,1.); +#279173 = DIRECTION('',(0.,0.,-1.)); +#279174 = ORIENTED_EDGE('',*,*,#279175,.T.); +#279175 = EDGE_CURVE('',#279168,#279168,#279176,.T.); +#279176 = CIRCLE('',#279177,0.137255); +#279177 = AXIS2_PLACEMENT_3D('',#279178,#279179,#279180); +#279178 = CARTESIAN_POINT('',(151.5,-153.,-3.5E-02)); +#279179 = DIRECTION('',(0.,0.,1.)); +#279180 = DIRECTION('',(1.,0.,-0.)); +#279181 = ORIENTED_EDGE('',*,*,#279165,.F.); +#279182 = ORIENTED_EDGE('',*,*,#279183,.F.); +#279183 = EDGE_CURVE('',#279166,#279166,#279184,.T.); +#279184 = CIRCLE('',#279185,0.137255); +#279185 = AXIS2_PLACEMENT_3D('',#279186,#279187,#279188); +#279186 = CARTESIAN_POINT('',(151.5,-153.,0.)); +#279187 = DIRECTION('',(0.,0.,1.)); +#279188 = DIRECTION('',(1.,0.,-0.)); +#279189 = CYLINDRICAL_SURFACE('',#279190,0.137255); +#279190 = AXIS2_PLACEMENT_3D('',#279191,#279192,#279193); +#279191 = CARTESIAN_POINT('',(151.5,-153.,0.)); +#279192 = DIRECTION('',(0.,0.,1.)); +#279193 = DIRECTION('',(1.,0.,-0.)); +#279194 = ADVANCED_FACE('',(#279195,#279198),#279201,.F.); +#279195 = FACE_BOUND('',#279196,.T.); +#279196 = EDGE_LOOP('',(#279197)); +#279197 = ORIENTED_EDGE('',*,*,#279150,.T.); +#279198 = FACE_BOUND('',#279199,.F.); +#279199 = EDGE_LOOP('',(#279200)); +#279200 = ORIENTED_EDGE('',*,*,#279183,.T.); +#279201 = PLANE('',#279202); +#279202 = AXIS2_PLACEMENT_3D('',#279203,#279204,#279205); +#279203 = CARTESIAN_POINT('',(0.,0.,0.)); +#279204 = DIRECTION('',(-0.,-0.,-1.)); +#279205 = DIRECTION('',(-1.,0.,0.)); +#279206 = ADVANCED_FACE('',(#279207,#279210),#279213,.T.); +#279207 = FACE_BOUND('',#279208,.F.); +#279208 = EDGE_LOOP('',(#279209)); +#279209 = ORIENTED_EDGE('',*,*,#279142,.T.); +#279210 = FACE_BOUND('',#279211,.T.); +#279211 = EDGE_LOOP('',(#279212)); +#279212 = ORIENTED_EDGE('',*,*,#279175,.T.); +#279213 = PLANE('',#279214); +#279214 = AXIS2_PLACEMENT_3D('',#279215,#279216,#279217); +#279215 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#279216 = DIRECTION('',(-0.,-0.,-1.)); +#279217 = DIRECTION('',(-1.,0.,0.)); +#279218 = MANIFOLD_SOLID_BREP('',#279219); +#279219 = CLOSED_SHELL('',(#279220,#279253,#279286,#279298)); +#279220 = ADVANCED_FACE('',(#279221),#279248,.T.); +#279221 = FACE_BOUND('',#279222,.T.); +#279222 = EDGE_LOOP('',(#279223,#279233,#279240,#279241)); +#279223 = ORIENTED_EDGE('',*,*,#279224,.T.); +#279224 = EDGE_CURVE('',#279225,#279227,#279229,.T.); +#279225 = VERTEX_POINT('',#279226); +#279226 = CARTESIAN_POINT('',(138.9,-146.5,0.)); +#279227 = VERTEX_POINT('',#279228); +#279228 = CARTESIAN_POINT('',(138.9,-146.5,-3.5E-02)); +#279229 = LINE('',#279230,#279231); +#279230 = CARTESIAN_POINT('',(138.9,-146.5,0.)); +#279231 = VECTOR('',#279232,1.); +#279232 = DIRECTION('',(0.,0.,-1.)); +#279233 = ORIENTED_EDGE('',*,*,#279234,.T.); +#279234 = EDGE_CURVE('',#279227,#279227,#279235,.T.); +#279235 = CIRCLE('',#279236,0.3); +#279236 = AXIS2_PLACEMENT_3D('',#279237,#279238,#279239); +#279237 = CARTESIAN_POINT('',(138.6,-146.5,-3.5E-02)); +#279238 = DIRECTION('',(0.,0.,1.)); +#279239 = DIRECTION('',(1.,0.,-0.)); +#279240 = ORIENTED_EDGE('',*,*,#279224,.F.); +#279241 = ORIENTED_EDGE('',*,*,#279242,.F.); +#279242 = EDGE_CURVE('',#279225,#279225,#279243,.T.); +#279243 = CIRCLE('',#279244,0.3); +#279244 = AXIS2_PLACEMENT_3D('',#279245,#279246,#279247); +#279245 = CARTESIAN_POINT('',(138.6,-146.5,0.)); +#279246 = DIRECTION('',(0.,0.,1.)); +#279247 = DIRECTION('',(1.,0.,-0.)); +#279248 = CYLINDRICAL_SURFACE('',#279249,0.3); +#279249 = AXIS2_PLACEMENT_3D('',#279250,#279251,#279252); +#279250 = CARTESIAN_POINT('',(138.6,-146.5,0.)); +#279251 = DIRECTION('',(0.,0.,1.)); +#279252 = DIRECTION('',(1.,0.,-0.)); +#279253 = ADVANCED_FACE('',(#279254),#279281,.F.); +#279254 = FACE_BOUND('',#279255,.F.); +#279255 = EDGE_LOOP('',(#279256,#279266,#279273,#279274)); +#279256 = ORIENTED_EDGE('',*,*,#279257,.T.); +#279257 = EDGE_CURVE('',#279258,#279260,#279262,.T.); +#279258 = VERTEX_POINT('',#279259); +#279259 = CARTESIAN_POINT('',(138.737255,-146.5,0.)); +#279260 = VERTEX_POINT('',#279261); +#279261 = CARTESIAN_POINT('',(138.737255,-146.5,-3.5E-02)); +#279262 = LINE('',#279263,#279264); +#279263 = CARTESIAN_POINT('',(138.737255,-146.5,0.)); +#279264 = VECTOR('',#279265,1.); +#279265 = DIRECTION('',(0.,0.,-1.)); +#279266 = ORIENTED_EDGE('',*,*,#279267,.T.); +#279267 = EDGE_CURVE('',#279260,#279260,#279268,.T.); +#279268 = CIRCLE('',#279269,0.137255); +#279269 = AXIS2_PLACEMENT_3D('',#279270,#279271,#279272); +#279270 = CARTESIAN_POINT('',(138.6,-146.5,-3.5E-02)); +#279271 = DIRECTION('',(0.,0.,1.)); +#279272 = DIRECTION('',(1.,0.,-0.)); +#279273 = ORIENTED_EDGE('',*,*,#279257,.F.); +#279274 = ORIENTED_EDGE('',*,*,#279275,.F.); +#279275 = EDGE_CURVE('',#279258,#279258,#279276,.T.); +#279276 = CIRCLE('',#279277,0.137255); +#279277 = AXIS2_PLACEMENT_3D('',#279278,#279279,#279280); +#279278 = CARTESIAN_POINT('',(138.6,-146.5,0.)); +#279279 = DIRECTION('',(0.,0.,1.)); +#279280 = DIRECTION('',(1.,0.,-0.)); +#279281 = CYLINDRICAL_SURFACE('',#279282,0.137255); +#279282 = AXIS2_PLACEMENT_3D('',#279283,#279284,#279285); +#279283 = CARTESIAN_POINT('',(138.6,-146.5,0.)); +#279284 = DIRECTION('',(0.,0.,1.)); +#279285 = DIRECTION('',(1.,0.,-0.)); +#279286 = ADVANCED_FACE('',(#279287,#279290),#279293,.F.); +#279287 = FACE_BOUND('',#279288,.T.); +#279288 = EDGE_LOOP('',(#279289)); +#279289 = ORIENTED_EDGE('',*,*,#279242,.T.); +#279290 = FACE_BOUND('',#279291,.F.); +#279291 = EDGE_LOOP('',(#279292)); +#279292 = ORIENTED_EDGE('',*,*,#279275,.T.); +#279293 = PLANE('',#279294); +#279294 = AXIS2_PLACEMENT_3D('',#279295,#279296,#279297); +#279295 = CARTESIAN_POINT('',(0.,0.,0.)); +#279296 = DIRECTION('',(-0.,-0.,-1.)); +#279297 = DIRECTION('',(-1.,0.,0.)); +#279298 = ADVANCED_FACE('',(#279299,#279302),#279305,.T.); +#279299 = FACE_BOUND('',#279300,.F.); +#279300 = EDGE_LOOP('',(#279301)); +#279301 = ORIENTED_EDGE('',*,*,#279234,.T.); +#279302 = FACE_BOUND('',#279303,.T.); +#279303 = EDGE_LOOP('',(#279304)); +#279304 = ORIENTED_EDGE('',*,*,#279267,.T.); +#279305 = PLANE('',#279306); +#279306 = AXIS2_PLACEMENT_3D('',#279307,#279308,#279309); +#279307 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#279308 = DIRECTION('',(-0.,-0.,-1.)); +#279309 = DIRECTION('',(-1.,0.,0.)); +#279310 = MANIFOLD_SOLID_BREP('',#279311); +#279311 = CLOSED_SHELL('',(#279312,#279352,#279383,#279416,#279447, + #279478,#279509,#279540,#279573,#279595,#279628,#279648)); +#279312 = ADVANCED_FACE('',(#279313),#279347,.F.); +#279313 = FACE_BOUND('',#279314,.F.); +#279314 = EDGE_LOOP('',(#279315,#279325,#279333,#279341)); +#279315 = ORIENTED_EDGE('',*,*,#279316,.T.); +#279316 = EDGE_CURVE('',#279317,#279319,#279321,.T.); +#279317 = VERTEX_POINT('',#279318); +#279318 = CARTESIAN_POINT('',(149.421921,-133.2195,0.)); +#279319 = VERTEX_POINT('',#279320); +#279320 = CARTESIAN_POINT('',(149.421921,-133.2195,-3.5E-02)); +#279321 = LINE('',#279322,#279323); +#279322 = CARTESIAN_POINT('',(149.421921,-133.2195,0.)); +#279323 = VECTOR('',#279324,1.); +#279324 = DIRECTION('',(0.,0.,-1.)); +#279325 = ORIENTED_EDGE('',*,*,#279326,.T.); +#279326 = EDGE_CURVE('',#279319,#279327,#279329,.T.); +#279327 = VERTEX_POINT('',#279328); +#279328 = CARTESIAN_POINT('',(149.27,-133.371422,-3.5E-02)); +#279329 = LINE('',#279330,#279331); +#279330 = CARTESIAN_POINT('',(149.421921,-133.2195,-3.5E-02)); +#279331 = VECTOR('',#279332,1.); +#279332 = DIRECTION('',(-0.707104453972,-0.707109108394,0.)); +#279333 = ORIENTED_EDGE('',*,*,#279334,.F.); +#279334 = EDGE_CURVE('',#279335,#279327,#279337,.T.); +#279335 = VERTEX_POINT('',#279336); +#279336 = CARTESIAN_POINT('',(149.27,-133.371422,0.)); +#279337 = LINE('',#279338,#279339); +#279338 = CARTESIAN_POINT('',(149.27,-133.371422,0.)); +#279339 = VECTOR('',#279340,1.); +#279340 = DIRECTION('',(0.,0.,-1.)); +#279341 = ORIENTED_EDGE('',*,*,#279342,.F.); +#279342 = EDGE_CURVE('',#279317,#279335,#279343,.T.); +#279343 = LINE('',#279344,#279345); +#279344 = CARTESIAN_POINT('',(149.421921,-133.2195,0.)); +#279345 = VECTOR('',#279346,1.); +#279346 = DIRECTION('',(-0.707104453972,-0.707109108394,0.)); +#279347 = PLANE('',#279348); +#279348 = AXIS2_PLACEMENT_3D('',#279349,#279350,#279351); +#279349 = CARTESIAN_POINT('',(149.421921,-133.2195,0.)); +#279350 = DIRECTION('',(-0.707109108394,0.707104453972,0.)); +#279351 = DIRECTION('',(-0.707104453972,-0.707109108394,0.)); +#279352 = ADVANCED_FACE('',(#279353),#279378,.F.); +#279353 = FACE_BOUND('',#279354,.F.); +#279354 = EDGE_LOOP('',(#279355,#279356,#279364,#279372)); +#279355 = ORIENTED_EDGE('',*,*,#279334,.T.); +#279356 = ORIENTED_EDGE('',*,*,#279357,.T.); +#279357 = EDGE_CURVE('',#279327,#279358,#279360,.T.); +#279358 = VERTEX_POINT('',#279359); +#279359 = CARTESIAN_POINT('',(149.268079,-133.719509,-3.5E-02)); +#279360 = LINE('',#279361,#279362); +#279361 = CARTESIAN_POINT('',(149.27,-133.371422,-3.5E-02)); +#279362 = VECTOR('',#279363,1.); +#279363 = DIRECTION('',(-5.518651220151E-03,-0.999984772128,0.)); +#279364 = ORIENTED_EDGE('',*,*,#279365,.F.); +#279365 = EDGE_CURVE('',#279366,#279358,#279368,.T.); +#279366 = VERTEX_POINT('',#279367); +#279367 = CARTESIAN_POINT('',(149.268079,-133.719509,0.)); +#279368 = LINE('',#279369,#279370); +#279369 = CARTESIAN_POINT('',(149.268079,-133.719509,0.)); +#279370 = VECTOR('',#279371,1.); +#279371 = DIRECTION('',(0.,0.,-1.)); +#279372 = ORIENTED_EDGE('',*,*,#279373,.F.); +#279373 = EDGE_CURVE('',#279335,#279366,#279374,.T.); +#279374 = LINE('',#279375,#279376); +#279375 = CARTESIAN_POINT('',(149.27,-133.371422,0.)); +#279376 = VECTOR('',#279377,1.); +#279377 = DIRECTION('',(-5.518651220151E-03,-0.999984772128,0.)); +#279378 = PLANE('',#279379); +#279379 = AXIS2_PLACEMENT_3D('',#279380,#279381,#279382); +#279380 = CARTESIAN_POINT('',(149.27,-133.371422,0.)); +#279381 = DIRECTION('',(-0.999984772128,5.518651220151E-03,0.)); +#279382 = DIRECTION('',(-5.518651220151E-03,-0.999984772128,0.)); +#279383 = ADVANCED_FACE('',(#279384),#279411,.T.); +#279384 = FACE_BOUND('',#279385,.F.); +#279385 = EDGE_LOOP('',(#279386,#279387,#279396,#279404)); +#279386 = ORIENTED_EDGE('',*,*,#279365,.T.); +#279387 = ORIENTED_EDGE('',*,*,#279388,.T.); +#279388 = EDGE_CURVE('',#279358,#279389,#279391,.T.); +#279389 = VERTEX_POINT('',#279390); +#279390 = CARTESIAN_POINT('',(149.071921,-133.719509,-3.5E-02)); +#279391 = CIRCLE('',#279392,0.100000456609); +#279392 = AXIS2_PLACEMENT_3D('',#279393,#279394,#279395); +#279393 = CARTESIAN_POINT('',(149.17,-133.7,-3.5E-02)); +#279394 = DIRECTION('',(-0.,0.,-1.)); +#279395 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#279396 = ORIENTED_EDGE('',*,*,#279397,.F.); +#279397 = EDGE_CURVE('',#279398,#279389,#279400,.T.); +#279398 = VERTEX_POINT('',#279399); +#279399 = CARTESIAN_POINT('',(149.071921,-133.719509,0.)); +#279400 = LINE('',#279401,#279402); +#279401 = CARTESIAN_POINT('',(149.071921,-133.719509,0.)); +#279402 = VECTOR('',#279403,1.); +#279403 = DIRECTION('',(0.,0.,-1.)); +#279404 = ORIENTED_EDGE('',*,*,#279405,.F.); +#279405 = EDGE_CURVE('',#279366,#279398,#279406,.T.); +#279406 = CIRCLE('',#279407,0.100000456609); +#279407 = AXIS2_PLACEMENT_3D('',#279408,#279409,#279410); +#279408 = CARTESIAN_POINT('',(149.17,-133.7,0.)); +#279409 = DIRECTION('',(-0.,0.,-1.)); +#279410 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#279411 = CYLINDRICAL_SURFACE('',#279412,0.100000456609); +#279412 = AXIS2_PLACEMENT_3D('',#279413,#279414,#279415); +#279413 = CARTESIAN_POINT('',(149.17,-133.7,0.)); +#279414 = DIRECTION('',(0.,-0.,1.)); +#279415 = DIRECTION('',(0.980785521646,-0.195089109205,-0.)); +#279416 = ADVANCED_FACE('',(#279417),#279442,.F.); +#279417 = FACE_BOUND('',#279418,.F.); +#279418 = EDGE_LOOP('',(#279419,#279420,#279428,#279436)); +#279419 = ORIENTED_EDGE('',*,*,#279397,.T.); +#279420 = ORIENTED_EDGE('',*,*,#279421,.T.); +#279421 = EDGE_CURVE('',#279389,#279422,#279424,.T.); +#279422 = VERTEX_POINT('',#279423); +#279423 = CARTESIAN_POINT('',(149.071921,-133.310491,-3.5E-02)); +#279424 = LINE('',#279425,#279426); +#279425 = CARTESIAN_POINT('',(149.071921,-133.719509,-3.5E-02)); +#279426 = VECTOR('',#279427,1.); +#279427 = DIRECTION('',(0.,1.,0.)); +#279428 = ORIENTED_EDGE('',*,*,#279429,.F.); +#279429 = EDGE_CURVE('',#279430,#279422,#279432,.T.); +#279430 = VERTEX_POINT('',#279431); +#279431 = CARTESIAN_POINT('',(149.071921,-133.310491,0.)); +#279432 = LINE('',#279433,#279434); +#279433 = CARTESIAN_POINT('',(149.071921,-133.310491,0.)); +#279434 = VECTOR('',#279435,1.); +#279435 = DIRECTION('',(0.,0.,-1.)); +#279436 = ORIENTED_EDGE('',*,*,#279437,.F.); +#279437 = EDGE_CURVE('',#279398,#279430,#279438,.T.); +#279438 = LINE('',#279439,#279440); +#279439 = CARTESIAN_POINT('',(149.071921,-133.719509,0.)); +#279440 = VECTOR('',#279441,1.); +#279441 = DIRECTION('',(0.,1.,0.)); +#279442 = PLANE('',#279443); +#279443 = AXIS2_PLACEMENT_3D('',#279444,#279445,#279446); +#279444 = CARTESIAN_POINT('',(149.071921,-133.719509,0.)); +#279445 = DIRECTION('',(1.,-0.,0.)); +#279446 = DIRECTION('',(0.,1.,0.)); +#279447 = ADVANCED_FACE('',(#279448),#279473,.F.); +#279448 = FACE_BOUND('',#279449,.F.); +#279449 = EDGE_LOOP('',(#279450,#279451,#279459,#279467)); +#279450 = ORIENTED_EDGE('',*,*,#279429,.T.); +#279451 = ORIENTED_EDGE('',*,*,#279452,.T.); +#279452 = EDGE_CURVE('',#279422,#279453,#279455,.T.); +#279453 = VERTEX_POINT('',#279454); +#279454 = CARTESIAN_POINT('',(149.086853,-133.274443,-3.5E-02)); +#279455 = LINE('',#279456,#279457); +#279456 = CARTESIAN_POINT('',(149.071921,-133.310491,-3.5E-02)); +#279457 = VECTOR('',#279458,1.); +#279458 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#279459 = ORIENTED_EDGE('',*,*,#279460,.F.); +#279460 = EDGE_CURVE('',#279461,#279453,#279463,.T.); +#279461 = VERTEX_POINT('',#279462); +#279462 = CARTESIAN_POINT('',(149.086853,-133.274443,0.)); +#279463 = LINE('',#279464,#279465); +#279464 = CARTESIAN_POINT('',(149.086853,-133.274443,0.)); +#279465 = VECTOR('',#279466,1.); +#279466 = DIRECTION('',(0.,0.,-1.)); +#279467 = ORIENTED_EDGE('',*,*,#279468,.F.); +#279468 = EDGE_CURVE('',#279430,#279461,#279469,.T.); +#279469 = LINE('',#279470,#279471); +#279470 = CARTESIAN_POINT('',(149.071921,-133.310491,0.)); +#279471 = VECTOR('',#279472,1.); +#279472 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#279473 = PLANE('',#279474); +#279474 = AXIS2_PLACEMENT_3D('',#279475,#279476,#279477); +#279475 = CARTESIAN_POINT('',(149.071921,-133.310491,0.)); +#279476 = DIRECTION('',(0.923875640631,-0.382692828059,0.)); +#279477 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#279478 = ADVANCED_FACE('',(#279479),#279504,.F.); +#279479 = FACE_BOUND('',#279480,.F.); +#279480 = EDGE_LOOP('',(#279481,#279482,#279490,#279498)); +#279481 = ORIENTED_EDGE('',*,*,#279460,.T.); +#279482 = ORIENTED_EDGE('',*,*,#279483,.T.); +#279483 = EDGE_CURVE('',#279453,#279484,#279486,.T.); +#279484 = VERTEX_POINT('',#279485); +#279485 = CARTESIAN_POINT('',(149.280499,-133.078078,-3.5E-02)); +#279486 = LINE('',#279487,#279488); +#279487 = CARTESIAN_POINT('',(149.086853,-133.274443,-3.5E-02)); +#279488 = VECTOR('',#279489,1.); +#279489 = DIRECTION('',(0.702160053398,0.712019142588,0.)); +#279490 = ORIENTED_EDGE('',*,*,#279491,.F.); +#279491 = EDGE_CURVE('',#279492,#279484,#279494,.T.); +#279492 = VERTEX_POINT('',#279493); +#279493 = CARTESIAN_POINT('',(149.280499,-133.078078,0.)); +#279494 = LINE('',#279495,#279496); +#279495 = CARTESIAN_POINT('',(149.280499,-133.078078,0.)); +#279496 = VECTOR('',#279497,1.); +#279497 = DIRECTION('',(0.,0.,-1.)); +#279498 = ORIENTED_EDGE('',*,*,#279499,.F.); +#279499 = EDGE_CURVE('',#279461,#279492,#279500,.T.); +#279500 = LINE('',#279501,#279502); +#279501 = CARTESIAN_POINT('',(149.086853,-133.274443,0.)); +#279502 = VECTOR('',#279503,1.); +#279503 = DIRECTION('',(0.702160053398,0.712019142588,0.)); +#279504 = PLANE('',#279505); +#279505 = AXIS2_PLACEMENT_3D('',#279506,#279507,#279508); +#279506 = CARTESIAN_POINT('',(149.086853,-133.274443,0.)); +#279507 = DIRECTION('',(0.712019142588,-0.702160053398,0.)); +#279508 = DIRECTION('',(0.702160053398,0.712019142588,0.)); +#279509 = ADVANCED_FACE('',(#279510),#279535,.F.); +#279510 = FACE_BOUND('',#279511,.F.); +#279511 = EDGE_LOOP('',(#279512,#279513,#279521,#279529)); +#279512 = ORIENTED_EDGE('',*,*,#279491,.T.); +#279513 = ORIENTED_EDGE('',*,*,#279514,.T.); +#279514 = EDGE_CURVE('',#279484,#279515,#279517,.T.); +#279515 = VERTEX_POINT('',#279516); +#279516 = CARTESIAN_POINT('',(149.272836,-133.064805,-3.5E-02)); +#279517 = LINE('',#279518,#279519); +#279518 = CARTESIAN_POINT('',(149.280499,-133.078078,-3.5E-02)); +#279519 = VECTOR('',#279520,1.); +#279520 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#279521 = ORIENTED_EDGE('',*,*,#279522,.F.); +#279522 = EDGE_CURVE('',#279523,#279515,#279525,.T.); +#279523 = VERTEX_POINT('',#279524); +#279524 = CARTESIAN_POINT('',(149.272836,-133.064805,0.)); +#279525 = LINE('',#279526,#279527); +#279526 = CARTESIAN_POINT('',(149.272836,-133.064805,0.)); +#279527 = VECTOR('',#279528,1.); +#279528 = DIRECTION('',(0.,0.,-1.)); +#279529 = ORIENTED_EDGE('',*,*,#279530,.F.); +#279530 = EDGE_CURVE('',#279492,#279523,#279531,.T.); +#279531 = LINE('',#279532,#279533); +#279532 = CARTESIAN_POINT('',(149.280499,-133.078078,0.)); +#279533 = VECTOR('',#279534,1.); +#279534 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#279535 = PLANE('',#279536); +#279536 = AXIS2_PLACEMENT_3D('',#279537,#279538,#279539); +#279537 = CARTESIAN_POINT('',(149.280499,-133.078078,0.)); +#279538 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#279539 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#279540 = ADVANCED_FACE('',(#279541),#279568,.T.); +#279541 = FACE_BOUND('',#279542,.F.); +#279542 = EDGE_LOOP('',(#279543,#279544,#279553,#279561)); +#279543 = ORIENTED_EDGE('',*,*,#279522,.T.); +#279544 = ORIENTED_EDGE('',*,*,#279545,.T.); +#279545 = EDGE_CURVE('',#279515,#279546,#279548,.T.); +#279546 = VERTEX_POINT('',#279547); +#279547 = CARTESIAN_POINT('',(149.435195,-133.227164,-3.5E-02)); +#279548 = CIRCLE('',#279549,0.300000118202); +#279549 = AXIS2_PLACEMENT_3D('',#279550,#279551,#279552); +#279550 = CARTESIAN_POINT('',(149.55,-132.95,-3.5E-02)); +#279551 = DIRECTION('',(0.,0.,-1.)); +#279552 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279553 = ORIENTED_EDGE('',*,*,#279554,.F.); +#279554 = EDGE_CURVE('',#279555,#279546,#279557,.T.); +#279555 = VERTEX_POINT('',#279556); +#279556 = CARTESIAN_POINT('',(149.435195,-133.227164,0.)); +#279557 = LINE('',#279558,#279559); +#279558 = CARTESIAN_POINT('',(149.435195,-133.227164,0.)); +#279559 = VECTOR('',#279560,1.); +#279560 = DIRECTION('',(0.,0.,-1.)); +#279561 = ORIENTED_EDGE('',*,*,#279562,.F.); +#279562 = EDGE_CURVE('',#279523,#279555,#279563,.T.); +#279563 = CIRCLE('',#279564,0.300000118202); +#279564 = AXIS2_PLACEMENT_3D('',#279565,#279566,#279567); +#279565 = CARTESIAN_POINT('',(149.55,-132.95,0.)); +#279566 = DIRECTION('',(0.,0.,-1.)); +#279567 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279568 = CYLINDRICAL_SURFACE('',#279569,0.300000118202); +#279569 = AXIS2_PLACEMENT_3D('',#279570,#279571,#279572); +#279570 = CARTESIAN_POINT('',(149.55,-132.95,0.)); +#279571 = DIRECTION('',(-0.,-0.,1.)); +#279572 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279573 = ADVANCED_FACE('',(#279574),#279590,.F.); +#279574 = FACE_BOUND('',#279575,.F.); +#279575 = EDGE_LOOP('',(#279576,#279577,#279583,#279584)); +#279576 = ORIENTED_EDGE('',*,*,#279554,.T.); +#279577 = ORIENTED_EDGE('',*,*,#279578,.T.); +#279578 = EDGE_CURVE('',#279546,#279319,#279579,.T.); +#279579 = LINE('',#279580,#279581); +#279580 = CARTESIAN_POINT('',(149.435195,-133.227164,-3.5E-02)); +#279581 = VECTOR('',#279582,1.); +#279582 = DIRECTION('',(-0.866018269693,0.500012356404,0.)); +#279583 = ORIENTED_EDGE('',*,*,#279316,.F.); +#279584 = ORIENTED_EDGE('',*,*,#279585,.F.); +#279585 = EDGE_CURVE('',#279555,#279317,#279586,.T.); +#279586 = LINE('',#279587,#279588); +#279587 = CARTESIAN_POINT('',(149.435195,-133.227164,0.)); +#279588 = VECTOR('',#279589,1.); +#279589 = DIRECTION('',(-0.866018269693,0.500012356404,0.)); +#279590 = PLANE('',#279591); +#279591 = AXIS2_PLACEMENT_3D('',#279592,#279593,#279594); +#279592 = CARTESIAN_POINT('',(149.435195,-133.227164,0.)); +#279593 = DIRECTION('',(0.500012356404,0.866018269693,0.)); +#279594 = DIRECTION('',(-0.866018269693,0.500012356404,0.)); +#279595 = ADVANCED_FACE('',(#279596),#279623,.F.); +#279596 = FACE_BOUND('',#279597,.F.); +#279597 = EDGE_LOOP('',(#279598,#279608,#279615,#279616)); +#279598 = ORIENTED_EDGE('',*,*,#279599,.T.); +#279599 = EDGE_CURVE('',#279600,#279602,#279604,.T.); +#279600 = VERTEX_POINT('',#279601); +#279601 = CARTESIAN_POINT('',(149.687255,-132.95,0.)); +#279602 = VERTEX_POINT('',#279603); +#279603 = CARTESIAN_POINT('',(149.687255,-132.95,-3.5E-02)); +#279604 = LINE('',#279605,#279606); +#279605 = CARTESIAN_POINT('',(149.687255,-132.95,0.)); +#279606 = VECTOR('',#279607,1.); +#279607 = DIRECTION('',(0.,0.,-1.)); +#279608 = ORIENTED_EDGE('',*,*,#279609,.T.); +#279609 = EDGE_CURVE('',#279602,#279602,#279610,.T.); +#279610 = CIRCLE('',#279611,0.137255); +#279611 = AXIS2_PLACEMENT_3D('',#279612,#279613,#279614); +#279612 = CARTESIAN_POINT('',(149.55,-132.95,-3.5E-02)); +#279613 = DIRECTION('',(0.,0.,1.)); +#279614 = DIRECTION('',(1.,0.,-0.)); +#279615 = ORIENTED_EDGE('',*,*,#279599,.F.); +#279616 = ORIENTED_EDGE('',*,*,#279617,.F.); +#279617 = EDGE_CURVE('',#279600,#279600,#279618,.T.); +#279618 = CIRCLE('',#279619,0.137255); +#279619 = AXIS2_PLACEMENT_3D('',#279620,#279621,#279622); +#279620 = CARTESIAN_POINT('',(149.55,-132.95,0.)); +#279621 = DIRECTION('',(0.,0.,1.)); +#279622 = DIRECTION('',(1.,0.,-0.)); +#279623 = CYLINDRICAL_SURFACE('',#279624,0.137255); +#279624 = AXIS2_PLACEMENT_3D('',#279625,#279626,#279627); +#279625 = CARTESIAN_POINT('',(149.55,-132.95,0.)); +#279626 = DIRECTION('',(0.,0.,1.)); +#279627 = DIRECTION('',(1.,0.,-0.)); +#279628 = ADVANCED_FACE('',(#279629,#279640),#279643,.F.); +#279629 = FACE_BOUND('',#279630,.F.); +#279630 = EDGE_LOOP('',(#279631,#279632,#279633,#279634,#279635,#279636, + #279637,#279638,#279639)); +#279631 = ORIENTED_EDGE('',*,*,#279342,.T.); +#279632 = ORIENTED_EDGE('',*,*,#279373,.T.); +#279633 = ORIENTED_EDGE('',*,*,#279405,.T.); +#279634 = ORIENTED_EDGE('',*,*,#279437,.T.); +#279635 = ORIENTED_EDGE('',*,*,#279468,.T.); +#279636 = ORIENTED_EDGE('',*,*,#279499,.T.); +#279637 = ORIENTED_EDGE('',*,*,#279530,.T.); +#279638 = ORIENTED_EDGE('',*,*,#279562,.T.); +#279639 = ORIENTED_EDGE('',*,*,#279585,.T.); +#279640 = FACE_BOUND('',#279641,.F.); +#279641 = EDGE_LOOP('',(#279642)); +#279642 = ORIENTED_EDGE('',*,*,#279617,.T.); +#279643 = PLANE('',#279644); +#279644 = AXIS2_PLACEMENT_3D('',#279645,#279646,#279647); +#279645 = CARTESIAN_POINT('',(0.,0.,0.)); +#279646 = DIRECTION('',(-0.,-0.,-1.)); +#279647 = DIRECTION('',(-1.,0.,0.)); +#279648 = ADVANCED_FACE('',(#279649,#279660),#279663,.T.); +#279649 = FACE_BOUND('',#279650,.T.); +#279650 = EDGE_LOOP('',(#279651,#279652,#279653,#279654,#279655,#279656, + #279657,#279658,#279659)); +#279651 = ORIENTED_EDGE('',*,*,#279326,.T.); +#279652 = ORIENTED_EDGE('',*,*,#279357,.T.); +#279653 = ORIENTED_EDGE('',*,*,#279388,.T.); +#279654 = ORIENTED_EDGE('',*,*,#279421,.T.); +#279655 = ORIENTED_EDGE('',*,*,#279452,.T.); +#279656 = ORIENTED_EDGE('',*,*,#279483,.T.); +#279657 = ORIENTED_EDGE('',*,*,#279514,.T.); +#279658 = ORIENTED_EDGE('',*,*,#279545,.T.); +#279659 = ORIENTED_EDGE('',*,*,#279578,.T.); +#279660 = FACE_BOUND('',#279661,.T.); +#279661 = EDGE_LOOP('',(#279662)); +#279662 = ORIENTED_EDGE('',*,*,#279609,.T.); +#279663 = PLANE('',#279664); +#279664 = AXIS2_PLACEMENT_3D('',#279665,#279666,#279667); +#279665 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#279666 = DIRECTION('',(-0.,-0.,-1.)); +#279667 = DIRECTION('',(-1.,0.,0.)); +#279668 = MANIFOLD_SOLID_BREP('',#279669); +#279669 = CLOSED_SHELL('',(#279670,#279710,#279741,#279772,#279805, + #279836,#279867,#279898,#279931,#279953,#279986,#280006)); +#279670 = ADVANCED_FACE('',(#279671),#279705,.F.); +#279671 = FACE_BOUND('',#279672,.F.); +#279672 = EDGE_LOOP('',(#279673,#279683,#279691,#279699)); +#279673 = ORIENTED_EDGE('',*,*,#279674,.T.); +#279674 = EDGE_CURVE('',#279675,#279677,#279679,.T.); +#279675 = VERTEX_POINT('',#279676); +#279676 = CARTESIAN_POINT('',(139.214253,-122.827168,0.)); +#279677 = VERTEX_POINT('',#279678); +#279678 = CARTESIAN_POINT('',(139.214253,-122.827168,-3.5E-02)); +#279679 = LINE('',#279680,#279681); +#279680 = CARTESIAN_POINT('',(139.214253,-122.827168,0.)); +#279681 = VECTOR('',#279682,1.); +#279682 = DIRECTION('',(0.,0.,-1.)); +#279683 = ORIENTED_EDGE('',*,*,#279684,.T.); +#279684 = EDGE_CURVE('',#279677,#279685,#279687,.T.); +#279685 = VERTEX_POINT('',#279686); +#279686 = CARTESIAN_POINT('',(139.155557,-122.883147,-3.5E-02)); +#279687 = LINE('',#279688,#279689); +#279688 = CARTESIAN_POINT('',(139.214253,-122.827168,-3.5E-02)); +#279689 = VECTOR('',#279690,1.); +#279690 = DIRECTION('',(-0.723657206617,-0.690159581048,0.)); +#279691 = ORIENTED_EDGE('',*,*,#279692,.F.); +#279692 = EDGE_CURVE('',#279693,#279685,#279695,.T.); +#279693 = VERTEX_POINT('',#279694); +#279694 = CARTESIAN_POINT('',(139.155557,-122.883147,0.)); +#279695 = LINE('',#279696,#279697); +#279696 = CARTESIAN_POINT('',(139.155557,-122.883147,0.)); +#279697 = VECTOR('',#279698,1.); +#279698 = DIRECTION('',(0.,0.,-1.)); +#279699 = ORIENTED_EDGE('',*,*,#279700,.F.); +#279700 = EDGE_CURVE('',#279675,#279693,#279701,.T.); +#279701 = LINE('',#279702,#279703); +#279702 = CARTESIAN_POINT('',(139.214253,-122.827168,0.)); +#279703 = VECTOR('',#279704,1.); +#279704 = DIRECTION('',(-0.723657206617,-0.690159581048,0.)); +#279705 = PLANE('',#279706); +#279706 = AXIS2_PLACEMENT_3D('',#279707,#279708,#279709); +#279707 = CARTESIAN_POINT('',(139.214253,-122.827168,0.)); +#279708 = DIRECTION('',(-0.690159581048,0.723657206617,0.)); +#279709 = DIRECTION('',(-0.723657206617,-0.690159581048,0.)); +#279710 = ADVANCED_FACE('',(#279711),#279736,.F.); +#279711 = FACE_BOUND('',#279712,.F.); +#279712 = EDGE_LOOP('',(#279713,#279714,#279722,#279730)); +#279713 = ORIENTED_EDGE('',*,*,#279692,.T.); +#279714 = ORIENTED_EDGE('',*,*,#279715,.T.); +#279715 = EDGE_CURVE('',#279685,#279716,#279718,.T.); +#279716 = VERTEX_POINT('',#279717); +#279717 = CARTESIAN_POINT('',(139.119509,-122.898079,-3.5E-02)); +#279718 = LINE('',#279719,#279720); +#279719 = CARTESIAN_POINT('',(139.155557,-122.883147,-3.5E-02)); +#279720 = VECTOR('',#279721,1.); +#279721 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#279722 = ORIENTED_EDGE('',*,*,#279723,.F.); +#279723 = EDGE_CURVE('',#279724,#279716,#279726,.T.); +#279724 = VERTEX_POINT('',#279725); +#279725 = CARTESIAN_POINT('',(139.119509,-122.898079,0.)); +#279726 = LINE('',#279727,#279728); +#279727 = CARTESIAN_POINT('',(139.119509,-122.898079,0.)); +#279728 = VECTOR('',#279729,1.); +#279729 = DIRECTION('',(0.,0.,-1.)); +#279730 = ORIENTED_EDGE('',*,*,#279731,.F.); +#279731 = EDGE_CURVE('',#279693,#279724,#279732,.T.); +#279732 = LINE('',#279733,#279734); +#279733 = CARTESIAN_POINT('',(139.155557,-122.883147,0.)); +#279734 = VECTOR('',#279735,1.); +#279735 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#279736 = PLANE('',#279737); +#279737 = AXIS2_PLACEMENT_3D('',#279738,#279739,#279740); +#279738 = CARTESIAN_POINT('',(139.155557,-122.883147,0.)); +#279739 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#279740 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#279741 = ADVANCED_FACE('',(#279742),#279767,.F.); +#279742 = FACE_BOUND('',#279743,.F.); +#279743 = EDGE_LOOP('',(#279744,#279745,#279753,#279761)); +#279744 = ORIENTED_EDGE('',*,*,#279723,.T.); +#279745 = ORIENTED_EDGE('',*,*,#279746,.T.); +#279746 = EDGE_CURVE('',#279716,#279747,#279749,.T.); +#279747 = VERTEX_POINT('',#279748); +#279748 = CARTESIAN_POINT('',(138.090491,-122.898079,-3.5E-02)); +#279749 = LINE('',#279750,#279751); +#279750 = CARTESIAN_POINT('',(139.119509,-122.898079,-3.5E-02)); +#279751 = VECTOR('',#279752,1.); +#279752 = DIRECTION('',(-1.,0.,0.)); +#279753 = ORIENTED_EDGE('',*,*,#279754,.F.); +#279754 = EDGE_CURVE('',#279755,#279747,#279757,.T.); +#279755 = VERTEX_POINT('',#279756); +#279756 = CARTESIAN_POINT('',(138.090491,-122.898079,0.)); +#279757 = LINE('',#279758,#279759); +#279758 = CARTESIAN_POINT('',(138.090491,-122.898079,0.)); +#279759 = VECTOR('',#279760,1.); +#279760 = DIRECTION('',(0.,0.,-1.)); +#279761 = ORIENTED_EDGE('',*,*,#279762,.F.); +#279762 = EDGE_CURVE('',#279724,#279755,#279763,.T.); +#279763 = LINE('',#279764,#279765); +#279764 = CARTESIAN_POINT('',(139.119509,-122.898079,0.)); +#279765 = VECTOR('',#279766,1.); +#279766 = DIRECTION('',(-1.,0.,0.)); +#279767 = PLANE('',#279768); +#279768 = AXIS2_PLACEMENT_3D('',#279769,#279770,#279771); +#279769 = CARTESIAN_POINT('',(139.119509,-122.898079,0.)); +#279770 = DIRECTION('',(0.,1.,0.)); +#279771 = DIRECTION('',(-1.,0.,0.)); +#279772 = ADVANCED_FACE('',(#279773),#279800,.T.); +#279773 = FACE_BOUND('',#279774,.F.); +#279774 = EDGE_LOOP('',(#279775,#279776,#279785,#279793)); +#279775 = ORIENTED_EDGE('',*,*,#279754,.T.); +#279776 = ORIENTED_EDGE('',*,*,#279777,.T.); +#279777 = EDGE_CURVE('',#279747,#279778,#279780,.T.); +#279778 = VERTEX_POINT('',#279779); +#279779 = CARTESIAN_POINT('',(138.090491,-122.701921,-3.5E-02)); +#279780 = CIRCLE('',#279781,0.100000456609); +#279781 = AXIS2_PLACEMENT_3D('',#279782,#279783,#279784); +#279782 = CARTESIAN_POINT('',(138.11,-122.8,-3.5E-02)); +#279783 = DIRECTION('',(0.,0.,-1.)); +#279784 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#279785 = ORIENTED_EDGE('',*,*,#279786,.F.); +#279786 = EDGE_CURVE('',#279787,#279778,#279789,.T.); +#279787 = VERTEX_POINT('',#279788); +#279788 = CARTESIAN_POINT('',(138.090491,-122.701921,0.)); +#279789 = LINE('',#279790,#279791); +#279790 = CARTESIAN_POINT('',(138.090491,-122.701921,0.)); +#279791 = VECTOR('',#279792,1.); +#279792 = DIRECTION('',(0.,0.,-1.)); +#279793 = ORIENTED_EDGE('',*,*,#279794,.F.); +#279794 = EDGE_CURVE('',#279755,#279787,#279795,.T.); +#279795 = CIRCLE('',#279796,0.100000456609); +#279796 = AXIS2_PLACEMENT_3D('',#279797,#279798,#279799); +#279797 = CARTESIAN_POINT('',(138.11,-122.8,0.)); +#279798 = DIRECTION('',(0.,0.,-1.)); +#279799 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#279800 = CYLINDRICAL_SURFACE('',#279801,0.100000456609); +#279801 = AXIS2_PLACEMENT_3D('',#279802,#279803,#279804); +#279802 = CARTESIAN_POINT('',(138.11,-122.8,0.)); +#279803 = DIRECTION('',(-0.,-0.,1.)); +#279804 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#279805 = ADVANCED_FACE('',(#279806),#279831,.F.); +#279806 = FACE_BOUND('',#279807,.F.); +#279807 = EDGE_LOOP('',(#279808,#279809,#279817,#279825)); +#279808 = ORIENTED_EDGE('',*,*,#279786,.T.); +#279809 = ORIENTED_EDGE('',*,*,#279810,.T.); +#279810 = EDGE_CURVE('',#279778,#279811,#279813,.T.); +#279811 = VERTEX_POINT('',#279812); +#279812 = CARTESIAN_POINT('',(139.058578,-122.7,-3.5E-02)); +#279813 = LINE('',#279814,#279815); +#279814 = CARTESIAN_POINT('',(138.090491,-122.701921,-3.5E-02)); +#279815 = VECTOR('',#279816,1.); +#279816 = DIRECTION('',(0.999998031231,1.984321882219E-03,0.)); +#279817 = ORIENTED_EDGE('',*,*,#279818,.F.); +#279818 = EDGE_CURVE('',#279819,#279811,#279821,.T.); +#279819 = VERTEX_POINT('',#279820); +#279820 = CARTESIAN_POINT('',(139.058578,-122.7,0.)); +#279821 = LINE('',#279822,#279823); +#279822 = CARTESIAN_POINT('',(139.058578,-122.7,0.)); +#279823 = VECTOR('',#279824,1.); +#279824 = DIRECTION('',(0.,0.,-1.)); +#279825 = ORIENTED_EDGE('',*,*,#279826,.F.); +#279826 = EDGE_CURVE('',#279787,#279819,#279827,.T.); +#279827 = LINE('',#279828,#279829); +#279828 = CARTESIAN_POINT('',(138.090491,-122.701921,0.)); +#279829 = VECTOR('',#279830,1.); +#279830 = DIRECTION('',(0.999998031231,1.984321882219E-03,0.)); +#279831 = PLANE('',#279832); +#279832 = AXIS2_PLACEMENT_3D('',#279833,#279834,#279835); +#279833 = CARTESIAN_POINT('',(138.090491,-122.701921,0.)); +#279834 = DIRECTION('',(1.984321882219E-03,-0.999998031231,0.)); +#279835 = DIRECTION('',(0.999998031231,1.984321882219E-03,0.)); +#279836 = ADVANCED_FACE('',(#279837),#279862,.F.); +#279837 = FACE_BOUND('',#279838,.F.); +#279838 = EDGE_LOOP('',(#279839,#279840,#279848,#279856)); +#279839 = ORIENTED_EDGE('',*,*,#279818,.T.); +#279840 = ORIENTED_EDGE('',*,*,#279841,.T.); +#279841 = EDGE_CURVE('',#279811,#279842,#279844,.T.); +#279842 = VERTEX_POINT('',#279843); +#279843 = CARTESIAN_POINT('',(139.072831,-122.685746,-3.5E-02)); +#279844 = LINE('',#279845,#279846); +#279845 = CARTESIAN_POINT('',(139.058578,-122.7,-3.5E-02)); +#279846 = VECTOR('',#279847,1.); +#279847 = DIRECTION('',(0.707081976079,0.707131585424,0.)); +#279848 = ORIENTED_EDGE('',*,*,#279849,.F.); +#279849 = EDGE_CURVE('',#279850,#279842,#279852,.T.); +#279850 = VERTEX_POINT('',#279851); +#279851 = CARTESIAN_POINT('',(139.072831,-122.685746,0.)); +#279852 = LINE('',#279853,#279854); +#279853 = CARTESIAN_POINT('',(139.072831,-122.685746,0.)); +#279854 = VECTOR('',#279855,1.); +#279855 = DIRECTION('',(0.,0.,-1.)); +#279856 = ORIENTED_EDGE('',*,*,#279857,.F.); +#279857 = EDGE_CURVE('',#279819,#279850,#279858,.T.); +#279858 = LINE('',#279859,#279860); +#279859 = CARTESIAN_POINT('',(139.058578,-122.7,0.)); +#279860 = VECTOR('',#279861,1.); +#279861 = DIRECTION('',(0.707081976079,0.707131585424,0.)); +#279862 = PLANE('',#279863); +#279863 = AXIS2_PLACEMENT_3D('',#279864,#279865,#279866); +#279864 = CARTESIAN_POINT('',(139.058578,-122.7,0.)); +#279865 = DIRECTION('',(0.707131585424,-0.707081976079,0.)); +#279866 = DIRECTION('',(0.707081976079,0.707131585424,0.)); +#279867 = ADVANCED_FACE('',(#279868),#279893,.F.); +#279868 = FACE_BOUND('',#279869,.F.); +#279869 = EDGE_LOOP('',(#279870,#279871,#279879,#279887)); +#279870 = ORIENTED_EDGE('',*,*,#279849,.T.); +#279871 = ORIENTED_EDGE('',*,*,#279872,.T.); +#279872 = EDGE_CURVE('',#279842,#279873,#279875,.T.); +#279873 = VERTEX_POINT('',#279874); +#279874 = CARTESIAN_POINT('',(139.065168,-122.672473,-3.5E-02)); +#279875 = LINE('',#279876,#279877); +#279876 = CARTESIAN_POINT('',(139.072831,-122.685746,-3.5E-02)); +#279877 = VECTOR('',#279878,1.); +#279878 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#279879 = ORIENTED_EDGE('',*,*,#279880,.F.); +#279880 = EDGE_CURVE('',#279881,#279873,#279883,.T.); +#279881 = VERTEX_POINT('',#279882); +#279882 = CARTESIAN_POINT('',(139.065168,-122.672473,0.)); +#279883 = LINE('',#279884,#279885); +#279884 = CARTESIAN_POINT('',(139.065168,-122.672473,0.)); +#279885 = VECTOR('',#279886,1.); +#279886 = DIRECTION('',(0.,0.,-1.)); +#279887 = ORIENTED_EDGE('',*,*,#279888,.F.); +#279888 = EDGE_CURVE('',#279850,#279881,#279889,.T.); +#279889 = LINE('',#279890,#279891); +#279890 = CARTESIAN_POINT('',(139.072831,-122.685746,0.)); +#279891 = VECTOR('',#279892,1.); +#279892 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#279893 = PLANE('',#279894); +#279894 = AXIS2_PLACEMENT_3D('',#279895,#279896,#279897); +#279895 = CARTESIAN_POINT('',(139.072831,-122.685746,0.)); +#279896 = DIRECTION('',(0.866030210228,0.499991674903,0.)); +#279897 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#279898 = ADVANCED_FACE('',(#279899),#279926,.T.); +#279899 = FACE_BOUND('',#279900,.F.); +#279900 = EDGE_LOOP('',(#279901,#279902,#279911,#279919)); +#279901 = ORIENTED_EDGE('',*,*,#279880,.T.); +#279902 = ORIENTED_EDGE('',*,*,#279903,.T.); +#279903 = EDGE_CURVE('',#279873,#279904,#279906,.T.); +#279904 = VERTEX_POINT('',#279905); +#279905 = CARTESIAN_POINT('',(139.227527,-122.834832,-3.5E-02)); +#279906 = CIRCLE('',#279907,0.300000118202); +#279907 = AXIS2_PLACEMENT_3D('',#279908,#279909,#279910); +#279908 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.5E-02)); +#279909 = DIRECTION('',(0.,0.,-1.)); +#279910 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279911 = ORIENTED_EDGE('',*,*,#279912,.F.); +#279912 = EDGE_CURVE('',#279913,#279904,#279915,.T.); +#279913 = VERTEX_POINT('',#279914); +#279914 = CARTESIAN_POINT('',(139.227527,-122.834832,0.)); +#279915 = LINE('',#279916,#279917); +#279916 = CARTESIAN_POINT('',(139.227527,-122.834832,0.)); +#279917 = VECTOR('',#279918,1.); +#279918 = DIRECTION('',(0.,0.,-1.)); +#279919 = ORIENTED_EDGE('',*,*,#279920,.F.); +#279920 = EDGE_CURVE('',#279881,#279913,#279921,.T.); +#279921 = CIRCLE('',#279922,0.300000118202); +#279922 = AXIS2_PLACEMENT_3D('',#279923,#279924,#279925); +#279923 = CARTESIAN_POINT('',(139.342332,-122.557668,0.)); +#279924 = DIRECTION('',(0.,0.,-1.)); +#279925 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279926 = CYLINDRICAL_SURFACE('',#279927,0.300000118202); +#279927 = AXIS2_PLACEMENT_3D('',#279928,#279929,#279930); +#279928 = CARTESIAN_POINT('',(139.342332,-122.557668,0.)); +#279929 = DIRECTION('',(-0.,-0.,1.)); +#279930 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#279931 = ADVANCED_FACE('',(#279932),#279948,.F.); +#279932 = FACE_BOUND('',#279933,.F.); +#279933 = EDGE_LOOP('',(#279934,#279935,#279941,#279942)); +#279934 = ORIENTED_EDGE('',*,*,#279912,.T.); +#279935 = ORIENTED_EDGE('',*,*,#279936,.T.); +#279936 = EDGE_CURVE('',#279904,#279677,#279937,.T.); +#279937 = LINE('',#279938,#279939); +#279938 = CARTESIAN_POINT('',(139.227527,-122.834832,-3.5E-02)); +#279939 = VECTOR('',#279940,1.); +#279940 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#279941 = ORIENTED_EDGE('',*,*,#279674,.F.); +#279942 = ORIENTED_EDGE('',*,*,#279943,.F.); +#279943 = EDGE_CURVE('',#279913,#279675,#279944,.T.); +#279944 = LINE('',#279945,#279946); +#279945 = CARTESIAN_POINT('',(139.227527,-122.834832,0.)); +#279946 = VECTOR('',#279947,1.); +#279947 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#279948 = PLANE('',#279949); +#279949 = AXIS2_PLACEMENT_3D('',#279950,#279951,#279952); +#279950 = CARTESIAN_POINT('',(139.227527,-122.834832,0.)); +#279951 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#279952 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#279953 = ADVANCED_FACE('',(#279954),#279981,.F.); +#279954 = FACE_BOUND('',#279955,.F.); +#279955 = EDGE_LOOP('',(#279956,#279966,#279973,#279974)); +#279956 = ORIENTED_EDGE('',*,*,#279957,.T.); +#279957 = EDGE_CURVE('',#279958,#279960,#279962,.T.); +#279958 = VERTEX_POINT('',#279959); +#279959 = CARTESIAN_POINT('',(139.479587,-122.557668,0.)); +#279960 = VERTEX_POINT('',#279961); +#279961 = CARTESIAN_POINT('',(139.479587,-122.557668,-3.5E-02)); +#279962 = LINE('',#279963,#279964); +#279963 = CARTESIAN_POINT('',(139.479587,-122.557668,0.)); +#279964 = VECTOR('',#279965,1.); +#279965 = DIRECTION('',(0.,0.,-1.)); +#279966 = ORIENTED_EDGE('',*,*,#279967,.T.); +#279967 = EDGE_CURVE('',#279960,#279960,#279968,.T.); +#279968 = CIRCLE('',#279969,0.137255); +#279969 = AXIS2_PLACEMENT_3D('',#279970,#279971,#279972); +#279970 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.5E-02)); +#279971 = DIRECTION('',(0.,0.,1.)); +#279972 = DIRECTION('',(1.,0.,-0.)); +#279973 = ORIENTED_EDGE('',*,*,#279957,.F.); +#279974 = ORIENTED_EDGE('',*,*,#279975,.F.); +#279975 = EDGE_CURVE('',#279958,#279958,#279976,.T.); +#279976 = CIRCLE('',#279977,0.137255); +#279977 = AXIS2_PLACEMENT_3D('',#279978,#279979,#279980); +#279978 = CARTESIAN_POINT('',(139.342332,-122.557668,0.)); +#279979 = DIRECTION('',(0.,0.,1.)); +#279980 = DIRECTION('',(1.,0.,-0.)); +#279981 = CYLINDRICAL_SURFACE('',#279982,0.137255); +#279982 = AXIS2_PLACEMENT_3D('',#279983,#279984,#279985); +#279983 = CARTESIAN_POINT('',(139.342332,-122.557668,0.)); +#279984 = DIRECTION('',(0.,0.,1.)); +#279985 = DIRECTION('',(1.,0.,-0.)); +#279986 = ADVANCED_FACE('',(#279987,#279998),#280001,.F.); +#279987 = FACE_BOUND('',#279988,.F.); +#279988 = EDGE_LOOP('',(#279989,#279990,#279991,#279992,#279993,#279994, + #279995,#279996,#279997)); +#279989 = ORIENTED_EDGE('',*,*,#279700,.T.); +#279990 = ORIENTED_EDGE('',*,*,#279731,.T.); +#279991 = ORIENTED_EDGE('',*,*,#279762,.T.); +#279992 = ORIENTED_EDGE('',*,*,#279794,.T.); +#279993 = ORIENTED_EDGE('',*,*,#279826,.T.); +#279994 = ORIENTED_EDGE('',*,*,#279857,.T.); +#279995 = ORIENTED_EDGE('',*,*,#279888,.T.); +#279996 = ORIENTED_EDGE('',*,*,#279920,.T.); +#279997 = ORIENTED_EDGE('',*,*,#279943,.T.); +#279998 = FACE_BOUND('',#279999,.F.); +#279999 = EDGE_LOOP('',(#280000)); +#280000 = ORIENTED_EDGE('',*,*,#279975,.T.); +#280001 = PLANE('',#280002); +#280002 = AXIS2_PLACEMENT_3D('',#280003,#280004,#280005); +#280003 = CARTESIAN_POINT('',(0.,0.,0.)); +#280004 = DIRECTION('',(-0.,-0.,-1.)); +#280005 = DIRECTION('',(-1.,0.,0.)); +#280006 = ADVANCED_FACE('',(#280007,#280018),#280021,.T.); +#280007 = FACE_BOUND('',#280008,.T.); +#280008 = EDGE_LOOP('',(#280009,#280010,#280011,#280012,#280013,#280014, + #280015,#280016,#280017)); +#280009 = ORIENTED_EDGE('',*,*,#279684,.T.); +#280010 = ORIENTED_EDGE('',*,*,#279715,.T.); +#280011 = ORIENTED_EDGE('',*,*,#279746,.T.); +#280012 = ORIENTED_EDGE('',*,*,#279777,.T.); +#280013 = ORIENTED_EDGE('',*,*,#279810,.T.); +#280014 = ORIENTED_EDGE('',*,*,#279841,.T.); +#280015 = ORIENTED_EDGE('',*,*,#279872,.T.); +#280016 = ORIENTED_EDGE('',*,*,#279903,.T.); +#280017 = ORIENTED_EDGE('',*,*,#279936,.T.); +#280018 = FACE_BOUND('',#280019,.T.); +#280019 = EDGE_LOOP('',(#280020)); +#280020 = ORIENTED_EDGE('',*,*,#279967,.T.); +#280021 = PLANE('',#280022); +#280022 = AXIS2_PLACEMENT_3D('',#280023,#280024,#280025); +#280023 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#280024 = DIRECTION('',(-0.,-0.,-1.)); +#280025 = DIRECTION('',(-1.,0.,0.)); +#280026 = MANIFOLD_SOLID_BREP('',#280027); +#280027 = CLOSED_SHELL('',(#280028,#280068,#280099,#280132,#280163, + #280194,#280225,#280258,#280289,#280311,#280344,#280364)); +#280028 = ADVANCED_FACE('',(#280029),#280063,.F.); +#280029 = FACE_BOUND('',#280030,.F.); +#280030 = EDGE_LOOP('',(#280031,#280041,#280049,#280057)); +#280031 = ORIENTED_EDGE('',*,*,#280032,.T.); +#280032 = EDGE_CURVE('',#280033,#280035,#280037,.T.); +#280033 = VERTEX_POINT('',#280034); +#280034 = CARTESIAN_POINT('',(127.426664,-119.875279,0.)); +#280035 = VERTEX_POINT('',#280036); +#280036 = CARTESIAN_POINT('',(127.426664,-119.875279,-3.5E-02)); +#280037 = LINE('',#280038,#280039); +#280038 = CARTESIAN_POINT('',(127.426664,-119.875279,0.)); +#280039 = VECTOR('',#280040,1.); +#280040 = DIRECTION('',(0.,0.,-1.)); +#280041 = ORIENTED_EDGE('',*,*,#280042,.T.); +#280042 = EDGE_CURVE('',#280035,#280043,#280045,.T.); +#280043 = VERTEX_POINT('',#280044); +#280044 = CARTESIAN_POINT('',(127.480736,-119.852882,-3.5E-02)); +#280045 = LINE('',#280046,#280047); +#280046 = CARTESIAN_POINT('',(127.426664,-119.875279,-3.5E-02)); +#280047 = VECTOR('',#280048,1.); +#280048 = DIRECTION('',(0.923881681501,0.382678244204,0.)); +#280049 = ORIENTED_EDGE('',*,*,#280050,.F.); +#280050 = EDGE_CURVE('',#280051,#280043,#280053,.T.); +#280051 = VERTEX_POINT('',#280052); +#280052 = CARTESIAN_POINT('',(127.480736,-119.852882,0.)); +#280053 = LINE('',#280054,#280055); +#280054 = CARTESIAN_POINT('',(127.480736,-119.852882,0.)); +#280055 = VECTOR('',#280056,1.); +#280056 = DIRECTION('',(0.,0.,-1.)); +#280057 = ORIENTED_EDGE('',*,*,#280058,.F.); +#280058 = EDGE_CURVE('',#280033,#280051,#280059,.T.); +#280059 = LINE('',#280060,#280061); +#280060 = CARTESIAN_POINT('',(127.426664,-119.875279,0.)); +#280061 = VECTOR('',#280062,1.); +#280062 = DIRECTION('',(0.923881681501,0.382678244204,0.)); +#280063 = PLANE('',#280064); +#280064 = AXIS2_PLACEMENT_3D('',#280065,#280066,#280067); +#280065 = CARTESIAN_POINT('',(127.426664,-119.875279,0.)); +#280066 = DIRECTION('',(0.382678244204,-0.923881681501,0.)); +#280067 = DIRECTION('',(0.923881681501,0.382678244204,0.)); +#280068 = ADVANCED_FACE('',(#280069),#280094,.F.); +#280069 = FACE_BOUND('',#280070,.F.); +#280070 = EDGE_LOOP('',(#280071,#280072,#280080,#280088)); +#280071 = ORIENTED_EDGE('',*,*,#280050,.T.); +#280072 = ORIENTED_EDGE('',*,*,#280073,.T.); +#280073 = EDGE_CURVE('',#280043,#280074,#280076,.T.); +#280074 = VERTEX_POINT('',#280075); +#280075 = CARTESIAN_POINT('',(127.929264,-119.852882,-3.5E-02)); +#280076 = LINE('',#280077,#280078); +#280077 = CARTESIAN_POINT('',(127.480736,-119.852882,-3.5E-02)); +#280078 = VECTOR('',#280079,1.); +#280079 = DIRECTION('',(1.,0.,0.)); +#280080 = ORIENTED_EDGE('',*,*,#280081,.F.); +#280081 = EDGE_CURVE('',#280082,#280074,#280084,.T.); +#280082 = VERTEX_POINT('',#280083); +#280083 = CARTESIAN_POINT('',(127.929264,-119.852882,0.)); +#280084 = LINE('',#280085,#280086); +#280085 = CARTESIAN_POINT('',(127.929264,-119.852882,0.)); +#280086 = VECTOR('',#280087,1.); +#280087 = DIRECTION('',(0.,0.,-1.)); +#280088 = ORIENTED_EDGE('',*,*,#280089,.F.); +#280089 = EDGE_CURVE('',#280051,#280082,#280090,.T.); +#280090 = LINE('',#280091,#280092); +#280091 = CARTESIAN_POINT('',(127.480736,-119.852882,0.)); +#280092 = VECTOR('',#280093,1.); +#280093 = DIRECTION('',(1.,0.,0.)); +#280094 = PLANE('',#280095); +#280095 = AXIS2_PLACEMENT_3D('',#280096,#280097,#280098); +#280096 = CARTESIAN_POINT('',(127.480736,-119.852882,0.)); +#280097 = DIRECTION('',(0.,-1.,0.)); +#280098 = DIRECTION('',(1.,0.,0.)); +#280099 = ADVANCED_FACE('',(#280100),#280127,.T.); +#280100 = FACE_BOUND('',#280101,.F.); +#280101 = EDGE_LOOP('',(#280102,#280103,#280112,#280120)); +#280102 = ORIENTED_EDGE('',*,*,#280081,.T.); +#280103 = ORIENTED_EDGE('',*,*,#280104,.T.); +#280104 = EDGE_CURVE('',#280074,#280105,#280107,.T.); +#280105 = VERTEX_POINT('',#280106); +#280106 = CARTESIAN_POINT('',(127.929264,-120.147118,-3.5E-02)); +#280107 = CIRCLE('',#280108,0.150000292066); +#280108 = AXIS2_PLACEMENT_3D('',#280109,#280110,#280111); +#280109 = CARTESIAN_POINT('',(127.9,-120.,-3.5E-02)); +#280110 = DIRECTION('',(0.,0.,-1.)); +#280111 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#280112 = ORIENTED_EDGE('',*,*,#280113,.F.); +#280113 = EDGE_CURVE('',#280114,#280105,#280116,.T.); +#280114 = VERTEX_POINT('',#280115); +#280115 = CARTESIAN_POINT('',(127.929264,-120.147118,0.)); +#280116 = LINE('',#280117,#280118); +#280117 = CARTESIAN_POINT('',(127.929264,-120.147118,0.)); +#280118 = VECTOR('',#280119,1.); +#280119 = DIRECTION('',(0.,0.,-1.)); +#280120 = ORIENTED_EDGE('',*,*,#280121,.F.); +#280121 = EDGE_CURVE('',#280082,#280114,#280122,.T.); +#280122 = CIRCLE('',#280123,0.150000292066); +#280123 = AXIS2_PLACEMENT_3D('',#280124,#280125,#280126); +#280124 = CARTESIAN_POINT('',(127.9,-120.,0.)); +#280125 = DIRECTION('',(0.,0.,-1.)); +#280126 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#280127 = CYLINDRICAL_SURFACE('',#280128,0.150000292066); +#280128 = AXIS2_PLACEMENT_3D('',#280129,#280130,#280131); +#280129 = CARTESIAN_POINT('',(127.9,-120.,0.)); +#280130 = DIRECTION('',(-0.,-0.,1.)); +#280131 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#280132 = ADVANCED_FACE('',(#280133),#280158,.F.); +#280133 = FACE_BOUND('',#280134,.F.); +#280134 = EDGE_LOOP('',(#280135,#280136,#280144,#280152)); +#280135 = ORIENTED_EDGE('',*,*,#280113,.T.); +#280136 = ORIENTED_EDGE('',*,*,#280137,.T.); +#280137 = EDGE_CURVE('',#280105,#280138,#280140,.T.); +#280138 = VERTEX_POINT('',#280139); +#280139 = CARTESIAN_POINT('',(127.572132,-120.15,-3.5E-02)); +#280140 = LINE('',#280141,#280142); +#280141 = CARTESIAN_POINT('',(127.929264,-120.147118,-3.5E-02)); +#280142 = VECTOR('',#280143,1.); +#280143 = DIRECTION('',(-0.999967440388,-8.069582572268E-03,0.)); +#280144 = ORIENTED_EDGE('',*,*,#280145,.F.); +#280145 = EDGE_CURVE('',#280146,#280138,#280148,.T.); +#280146 = VERTEX_POINT('',#280147); +#280147 = CARTESIAN_POINT('',(127.572132,-120.15,0.)); +#280148 = LINE('',#280149,#280150); +#280149 = CARTESIAN_POINT('',(127.572132,-120.15,0.)); +#280150 = VECTOR('',#280151,1.); +#280151 = DIRECTION('',(0.,0.,-1.)); +#280152 = ORIENTED_EDGE('',*,*,#280153,.F.); +#280153 = EDGE_CURVE('',#280114,#280146,#280154,.T.); +#280154 = LINE('',#280155,#280156); +#280155 = CARTESIAN_POINT('',(127.929264,-120.147118,0.)); +#280156 = VECTOR('',#280157,1.); +#280157 = DIRECTION('',(-0.999967440388,-8.069582572268E-03,0.)); +#280158 = PLANE('',#280159); +#280159 = AXIS2_PLACEMENT_3D('',#280160,#280161,#280162); +#280160 = CARTESIAN_POINT('',(127.929264,-120.147118,0.)); +#280161 = DIRECTION('',(-8.069582572268E-03,0.999967440388,0.)); +#280162 = DIRECTION('',(-0.999967440388,-8.069582572268E-03,0.)); +#280163 = ADVANCED_FACE('',(#280164),#280189,.F.); +#280164 = FACE_BOUND('',#280165,.F.); +#280165 = EDGE_LOOP('',(#280166,#280167,#280175,#280183)); +#280166 = ORIENTED_EDGE('',*,*,#280145,.T.); +#280167 = ORIENTED_EDGE('',*,*,#280168,.T.); +#280168 = EDGE_CURVE('',#280138,#280169,#280171,.T.); +#280169 = VERTEX_POINT('',#280170); +#280170 = CARTESIAN_POINT('',(127.397682,-120.324449,-3.5E-02)); +#280171 = LINE('',#280172,#280173); +#280172 = CARTESIAN_POINT('',(127.572132,-120.15,-3.5E-02)); +#280173 = VECTOR('',#280174,1.); +#280174 = DIRECTION('',(-0.707108807864,-0.707104754503,0.)); +#280175 = ORIENTED_EDGE('',*,*,#280176,.F.); +#280176 = EDGE_CURVE('',#280177,#280169,#280179,.T.); +#280177 = VERTEX_POINT('',#280178); +#280178 = CARTESIAN_POINT('',(127.397682,-120.324449,0.)); +#280179 = LINE('',#280180,#280181); +#280180 = CARTESIAN_POINT('',(127.397682,-120.324449,0.)); +#280181 = VECTOR('',#280182,1.); +#280182 = DIRECTION('',(0.,0.,-1.)); +#280183 = ORIENTED_EDGE('',*,*,#280184,.F.); +#280184 = EDGE_CURVE('',#280146,#280177,#280185,.T.); +#280185 = LINE('',#280186,#280187); +#280186 = CARTESIAN_POINT('',(127.572132,-120.15,0.)); +#280187 = VECTOR('',#280188,1.); +#280188 = DIRECTION('',(-0.707108807864,-0.707104754503,0.)); +#280189 = PLANE('',#280190); +#280190 = AXIS2_PLACEMENT_3D('',#280191,#280192,#280193); +#280191 = CARTESIAN_POINT('',(127.572132,-120.15,0.)); +#280192 = DIRECTION('',(-0.707104754503,0.707108807864,0.)); +#280193 = DIRECTION('',(-0.707108807864,-0.707104754503,0.)); +#280194 = ADVANCED_FACE('',(#280195),#280220,.F.); +#280195 = FACE_BOUND('',#280196,.F.); +#280196 = EDGE_LOOP('',(#280197,#280198,#280206,#280214)); +#280197 = ORIENTED_EDGE('',*,*,#280176,.T.); +#280198 = ORIENTED_EDGE('',*,*,#280199,.T.); +#280199 = EDGE_CURVE('',#280169,#280200,#280202,.T.); +#280200 = VERTEX_POINT('',#280201); +#280201 = CARTESIAN_POINT('',(127.407433,-120.360842,-3.5E-02)); +#280202 = LINE('',#280203,#280204); +#280203 = CARTESIAN_POINT('',(127.397682,-120.324449,-3.5E-02)); +#280204 = VECTOR('',#280205,1.); +#280205 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#280206 = ORIENTED_EDGE('',*,*,#280207,.F.); +#280207 = EDGE_CURVE('',#280208,#280200,#280210,.T.); +#280208 = VERTEX_POINT('',#280209); +#280209 = CARTESIAN_POINT('',(127.407433,-120.360842,0.)); +#280210 = LINE('',#280211,#280212); +#280211 = CARTESIAN_POINT('',(127.407433,-120.360842,0.)); +#280212 = VECTOR('',#280213,1.); +#280213 = DIRECTION('',(0.,0.,-1.)); +#280214 = ORIENTED_EDGE('',*,*,#280215,.F.); +#280215 = EDGE_CURVE('',#280177,#280208,#280216,.T.); +#280216 = LINE('',#280217,#280218); +#280217 = CARTESIAN_POINT('',(127.397682,-120.324449,0.)); +#280218 = VECTOR('',#280219,1.); +#280219 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#280220 = PLANE('',#280221); +#280221 = AXIS2_PLACEMENT_3D('',#280222,#280223,#280224); +#280222 = CARTESIAN_POINT('',(127.397682,-120.324449,0.)); +#280223 = DIRECTION('',(-0.96592897777,-0.25880728333,-0.)); +#280224 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#280225 = ADVANCED_FACE('',(#280226),#280253,.T.); +#280226 = FACE_BOUND('',#280227,.F.); +#280227 = EDGE_LOOP('',(#280228,#280229,#280238,#280246)); +#280228 = ORIENTED_EDGE('',*,*,#280207,.T.); +#280229 = ORIENTED_EDGE('',*,*,#280230,.T.); +#280230 = EDGE_CURVE('',#280200,#280231,#280233,.T.); +#280231 = VERTEX_POINT('',#280232); +#280232 = CARTESIAN_POINT('',(127.149158,-120.102567,-3.5E-02)); +#280233 = CIRCLE('',#280234,0.299999641111); +#280234 = AXIS2_PLACEMENT_3D('',#280235,#280236,#280237); +#280235 = CARTESIAN_POINT('',(127.10999993135,-120.4000000686,-3.5E-02) + ); +#280236 = DIRECTION('',(0.,0.,-1.)); +#280237 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#280238 = ORIENTED_EDGE('',*,*,#280239,.F.); +#280239 = EDGE_CURVE('',#280240,#280231,#280242,.T.); +#280240 = VERTEX_POINT('',#280241); +#280241 = CARTESIAN_POINT('',(127.149158,-120.102567,0.)); +#280242 = LINE('',#280243,#280244); +#280243 = CARTESIAN_POINT('',(127.149158,-120.102567,0.)); +#280244 = VECTOR('',#280245,1.); +#280245 = DIRECTION('',(0.,0.,-1.)); +#280246 = ORIENTED_EDGE('',*,*,#280247,.F.); +#280247 = EDGE_CURVE('',#280208,#280240,#280248,.T.); +#280248 = CIRCLE('',#280249,0.299999641111); +#280249 = AXIS2_PLACEMENT_3D('',#280250,#280251,#280252); +#280250 = CARTESIAN_POINT('',(127.10999993135,-120.4000000686,0.)); +#280251 = DIRECTION('',(0.,0.,-1.)); +#280252 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#280253 = CYLINDRICAL_SURFACE('',#280254,0.299999641111); +#280254 = AXIS2_PLACEMENT_3D('',#280255,#280256,#280257); +#280255 = CARTESIAN_POINT('',(127.10999993135,-120.4000000686,0.)); +#280256 = DIRECTION('',(-0.,-0.,1.)); +#280257 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#280258 = ADVANCED_FACE('',(#280259),#280284,.F.); +#280259 = FACE_BOUND('',#280260,.F.); +#280260 = EDGE_LOOP('',(#280261,#280262,#280270,#280278)); +#280261 = ORIENTED_EDGE('',*,*,#280239,.T.); +#280262 = ORIENTED_EDGE('',*,*,#280263,.T.); +#280263 = EDGE_CURVE('',#280231,#280264,#280266,.T.); +#280264 = VERTEX_POINT('',#280265); +#280265 = CARTESIAN_POINT('',(127.18555,-120.112317,-3.5E-02)); +#280266 = LINE('',#280267,#280268); +#280267 = CARTESIAN_POINT('',(127.149158,-120.102567,-3.5E-02)); +#280268 = VECTOR('',#280269,1.); +#280269 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#280270 = ORIENTED_EDGE('',*,*,#280271,.F.); +#280271 = EDGE_CURVE('',#280272,#280264,#280274,.T.); +#280272 = VERTEX_POINT('',#280273); +#280273 = CARTESIAN_POINT('',(127.18555,-120.112317,0.)); +#280274 = LINE('',#280275,#280276); +#280275 = CARTESIAN_POINT('',(127.18555,-120.112317,0.)); +#280276 = VECTOR('',#280277,1.); +#280277 = DIRECTION('',(0.,0.,-1.)); +#280278 = ORIENTED_EDGE('',*,*,#280279,.F.); +#280279 = EDGE_CURVE('',#280240,#280272,#280280,.T.); +#280280 = LINE('',#280281,#280282); +#280281 = CARTESIAN_POINT('',(127.149158,-120.102567,0.)); +#280282 = VECTOR('',#280283,1.); +#280283 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#280284 = PLANE('',#280285); +#280285 = AXIS2_PLACEMENT_3D('',#280286,#280287,#280288); +#280286 = CARTESIAN_POINT('',(127.149158,-120.102567,0.)); +#280287 = DIRECTION('',(-0.258789153994,-0.965933835092,-0.)); +#280288 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#280289 = ADVANCED_FACE('',(#280290),#280306,.F.); +#280290 = FACE_BOUND('',#280291,.F.); +#280291 = EDGE_LOOP('',(#280292,#280293,#280299,#280300)); +#280292 = ORIENTED_EDGE('',*,*,#280271,.T.); +#280293 = ORIENTED_EDGE('',*,*,#280294,.T.); +#280294 = EDGE_CURVE('',#280264,#280035,#280295,.T.); +#280295 = LINE('',#280296,#280297); +#280296 = CARTESIAN_POINT('',(127.18555,-120.112317,-3.5E-02)); +#280297 = VECTOR('',#280298,1.); +#280298 = DIRECTION('',(0.713108593788,0.701053588155,0.)); +#280299 = ORIENTED_EDGE('',*,*,#280032,.F.); +#280300 = ORIENTED_EDGE('',*,*,#280301,.F.); +#280301 = EDGE_CURVE('',#280272,#280033,#280302,.T.); +#280302 = LINE('',#280303,#280304); +#280303 = CARTESIAN_POINT('',(127.18555,-120.112317,0.)); +#280304 = VECTOR('',#280305,1.); +#280305 = DIRECTION('',(0.713108593788,0.701053588155,0.)); +#280306 = PLANE('',#280307); +#280307 = AXIS2_PLACEMENT_3D('',#280308,#280309,#280310); +#280308 = CARTESIAN_POINT('',(127.18555,-120.112317,0.)); +#280309 = DIRECTION('',(0.701053588155,-0.713108593788,0.)); +#280310 = DIRECTION('',(0.713108593788,0.701053588155,0.)); +#280311 = ADVANCED_FACE('',(#280312),#280339,.F.); +#280312 = FACE_BOUND('',#280313,.F.); +#280313 = EDGE_LOOP('',(#280314,#280324,#280331,#280332)); +#280314 = ORIENTED_EDGE('',*,*,#280315,.T.); +#280315 = EDGE_CURVE('',#280316,#280318,#280320,.T.); +#280316 = VERTEX_POINT('',#280317); +#280317 = CARTESIAN_POINT('',(127.247255,-120.4,0.)); +#280318 = VERTEX_POINT('',#280319); +#280319 = CARTESIAN_POINT('',(127.247255,-120.4,-3.5E-02)); +#280320 = LINE('',#280321,#280322); +#280321 = CARTESIAN_POINT('',(127.247255,-120.4,0.)); +#280322 = VECTOR('',#280323,1.); +#280323 = DIRECTION('',(0.,0.,-1.)); +#280324 = ORIENTED_EDGE('',*,*,#280325,.T.); +#280325 = EDGE_CURVE('',#280318,#280318,#280326,.T.); +#280326 = CIRCLE('',#280327,0.137255); +#280327 = AXIS2_PLACEMENT_3D('',#280328,#280329,#280330); +#280328 = CARTESIAN_POINT('',(127.11,-120.4,-3.5E-02)); +#280329 = DIRECTION('',(0.,0.,1.)); +#280330 = DIRECTION('',(1.,0.,-0.)); +#280331 = ORIENTED_EDGE('',*,*,#280315,.F.); +#280332 = ORIENTED_EDGE('',*,*,#280333,.F.); +#280333 = EDGE_CURVE('',#280316,#280316,#280334,.T.); +#280334 = CIRCLE('',#280335,0.137255); +#280335 = AXIS2_PLACEMENT_3D('',#280336,#280337,#280338); +#280336 = CARTESIAN_POINT('',(127.11,-120.4,0.)); +#280337 = DIRECTION('',(0.,0.,1.)); +#280338 = DIRECTION('',(1.,0.,-0.)); +#280339 = CYLINDRICAL_SURFACE('',#280340,0.137255); +#280340 = AXIS2_PLACEMENT_3D('',#280341,#280342,#280343); +#280341 = CARTESIAN_POINT('',(127.11,-120.4,0.)); +#280342 = DIRECTION('',(0.,0.,1.)); +#280343 = DIRECTION('',(1.,0.,-0.)); +#280344 = ADVANCED_FACE('',(#280345,#280356),#280359,.F.); +#280345 = FACE_BOUND('',#280346,.F.); +#280346 = EDGE_LOOP('',(#280347,#280348,#280349,#280350,#280351,#280352, + #280353,#280354,#280355)); +#280347 = ORIENTED_EDGE('',*,*,#280058,.T.); +#280348 = ORIENTED_EDGE('',*,*,#280089,.T.); +#280349 = ORIENTED_EDGE('',*,*,#280121,.T.); +#280350 = ORIENTED_EDGE('',*,*,#280153,.T.); +#280351 = ORIENTED_EDGE('',*,*,#280184,.T.); +#280352 = ORIENTED_EDGE('',*,*,#280215,.T.); +#280353 = ORIENTED_EDGE('',*,*,#280247,.T.); +#280354 = ORIENTED_EDGE('',*,*,#280279,.T.); +#280355 = ORIENTED_EDGE('',*,*,#280301,.T.); +#280356 = FACE_BOUND('',#280357,.F.); +#280357 = EDGE_LOOP('',(#280358)); +#280358 = ORIENTED_EDGE('',*,*,#280333,.T.); +#280359 = PLANE('',#280360); +#280360 = AXIS2_PLACEMENT_3D('',#280361,#280362,#280363); +#280361 = CARTESIAN_POINT('',(0.,0.,0.)); +#280362 = DIRECTION('',(-0.,-0.,-1.)); +#280363 = DIRECTION('',(-1.,0.,0.)); +#280364 = ADVANCED_FACE('',(#280365,#280376),#280379,.T.); +#280365 = FACE_BOUND('',#280366,.T.); +#280366 = EDGE_LOOP('',(#280367,#280368,#280369,#280370,#280371,#280372, + #280373,#280374,#280375)); +#280367 = ORIENTED_EDGE('',*,*,#280042,.T.); +#280368 = ORIENTED_EDGE('',*,*,#280073,.T.); +#280369 = ORIENTED_EDGE('',*,*,#280104,.T.); +#280370 = ORIENTED_EDGE('',*,*,#280137,.T.); +#280371 = ORIENTED_EDGE('',*,*,#280168,.T.); +#280372 = ORIENTED_EDGE('',*,*,#280199,.T.); +#280373 = ORIENTED_EDGE('',*,*,#280230,.T.); +#280374 = ORIENTED_EDGE('',*,*,#280263,.T.); +#280375 = ORIENTED_EDGE('',*,*,#280294,.T.); +#280376 = FACE_BOUND('',#280377,.T.); +#280377 = EDGE_LOOP('',(#280378)); +#280378 = ORIENTED_EDGE('',*,*,#280325,.T.); +#280379 = PLANE('',#280380); +#280380 = AXIS2_PLACEMENT_3D('',#280381,#280382,#280383); +#280381 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#280382 = DIRECTION('',(-0.,-0.,-1.)); +#280383 = DIRECTION('',(-1.,0.,0.)); +#280384 = MANIFOLD_SOLID_BREP('',#280385); +#280385 = CLOSED_SHELL('',(#280386,#280426,#280457,#280488,#280521, + #280552,#280583,#280616,#280647,#280680,#280711,#280742,#280773, + #280806,#280837,#280870,#280901,#280934,#280965,#280998,#281020, + #281053,#281084)); +#280386 = ADVANCED_FACE('',(#280387),#280421,.F.); +#280387 = FACE_BOUND('',#280388,.F.); +#280388 = EDGE_LOOP('',(#280389,#280399,#280407,#280415)); +#280389 = ORIENTED_EDGE('',*,*,#280390,.T.); +#280390 = EDGE_CURVE('',#280391,#280393,#280395,.T.); +#280391 = VERTEX_POINT('',#280392); +#280392 = CARTESIAN_POINT('',(122.3,-108.088908,0.)); +#280393 = VERTEX_POINT('',#280394); +#280394 = CARTESIAN_POINT('',(122.3,-108.088908,-3.5E-02)); +#280395 = LINE('',#280396,#280397); +#280396 = CARTESIAN_POINT('',(122.3,-108.088908,0.)); +#280397 = VECTOR('',#280398,1.); +#280398 = DIRECTION('',(0.,0.,-1.)); +#280399 = ORIENTED_EDGE('',*,*,#280400,.T.); +#280400 = EDGE_CURVE('',#280393,#280401,#280403,.T.); +#280401 = VERTEX_POINT('',#280402); +#280402 = CARTESIAN_POINT('',(122.3,-108.936092,-3.5E-02)); +#280403 = LINE('',#280404,#280405); +#280404 = CARTESIAN_POINT('',(122.3,-108.088908,-3.5E-02)); +#280405 = VECTOR('',#280406,1.); +#280406 = DIRECTION('',(0.,-1.,0.)); +#280407 = ORIENTED_EDGE('',*,*,#280408,.F.); +#280408 = EDGE_CURVE('',#280409,#280401,#280411,.T.); +#280409 = VERTEX_POINT('',#280410); +#280410 = CARTESIAN_POINT('',(122.3,-108.936092,0.)); +#280411 = LINE('',#280412,#280413); +#280412 = CARTESIAN_POINT('',(122.3,-108.936092,0.)); +#280413 = VECTOR('',#280414,1.); +#280414 = DIRECTION('',(0.,0.,-1.)); +#280415 = ORIENTED_EDGE('',*,*,#280416,.F.); +#280416 = EDGE_CURVE('',#280391,#280409,#280417,.T.); +#280417 = LINE('',#280418,#280419); +#280418 = CARTESIAN_POINT('',(122.3,-108.088908,0.)); +#280419 = VECTOR('',#280420,1.); +#280420 = DIRECTION('',(0.,-1.,0.)); +#280421 = PLANE('',#280422); +#280422 = AXIS2_PLACEMENT_3D('',#280423,#280424,#280425); +#280423 = CARTESIAN_POINT('',(122.3,-108.088908,0.)); +#280424 = DIRECTION('',(-1.,-0.,-0.)); +#280425 = DIRECTION('',(0.,-1.,0.)); +#280426 = ADVANCED_FACE('',(#280427),#280452,.F.); +#280427 = FACE_BOUND('',#280428,.F.); +#280428 = EDGE_LOOP('',(#280429,#280430,#280438,#280446)); +#280429 = ORIENTED_EDGE('',*,*,#280408,.T.); +#280430 = ORIENTED_EDGE('',*,*,#280431,.T.); +#280431 = EDGE_CURVE('',#280401,#280432,#280434,.T.); +#280432 = VERTEX_POINT('',#280433); +#280433 = CARTESIAN_POINT('',(123.088908,-109.725,-3.5E-02)); +#280434 = LINE('',#280435,#280436); +#280435 = CARTESIAN_POINT('',(122.3,-108.936092,-3.5E-02)); +#280436 = VECTOR('',#280437,1.); +#280437 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#280438 = ORIENTED_EDGE('',*,*,#280439,.F.); +#280439 = EDGE_CURVE('',#280440,#280432,#280442,.T.); +#280440 = VERTEX_POINT('',#280441); +#280441 = CARTESIAN_POINT('',(123.088908,-109.725,0.)); +#280442 = LINE('',#280443,#280444); +#280443 = CARTESIAN_POINT('',(123.088908,-109.725,0.)); +#280444 = VECTOR('',#280445,1.); +#280445 = DIRECTION('',(0.,0.,-1.)); +#280446 = ORIENTED_EDGE('',*,*,#280447,.F.); +#280447 = EDGE_CURVE('',#280409,#280440,#280448,.T.); +#280448 = LINE('',#280449,#280450); +#280449 = CARTESIAN_POINT('',(122.3,-108.936092,0.)); +#280450 = VECTOR('',#280451,1.); +#280451 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#280452 = PLANE('',#280453); +#280453 = AXIS2_PLACEMENT_3D('',#280454,#280455,#280456); +#280454 = CARTESIAN_POINT('',(122.3,-108.936092,0.)); +#280455 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#280456 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#280457 = ADVANCED_FACE('',(#280458),#280483,.F.); +#280458 = FACE_BOUND('',#280459,.F.); +#280459 = EDGE_LOOP('',(#280460,#280461,#280469,#280477)); +#280460 = ORIENTED_EDGE('',*,*,#280439,.T.); +#280461 = ORIENTED_EDGE('',*,*,#280462,.T.); +#280462 = EDGE_CURVE('',#280432,#280463,#280465,.T.); +#280463 = VERTEX_POINT('',#280464); +#280464 = CARTESIAN_POINT('',(125.,-109.725,-3.5E-02)); +#280465 = LINE('',#280466,#280467); +#280466 = CARTESIAN_POINT('',(123.088908,-109.725,-3.5E-02)); +#280467 = VECTOR('',#280468,1.); +#280468 = DIRECTION('',(1.,0.,0.)); +#280469 = ORIENTED_EDGE('',*,*,#280470,.F.); +#280470 = EDGE_CURVE('',#280471,#280463,#280473,.T.); +#280471 = VERTEX_POINT('',#280472); +#280472 = CARTESIAN_POINT('',(125.,-109.725,0.)); +#280473 = LINE('',#280474,#280475); +#280474 = CARTESIAN_POINT('',(125.,-109.725,0.)); +#280475 = VECTOR('',#280476,1.); +#280476 = DIRECTION('',(0.,0.,-1.)); +#280477 = ORIENTED_EDGE('',*,*,#280478,.F.); +#280478 = EDGE_CURVE('',#280440,#280471,#280479,.T.); +#280479 = LINE('',#280480,#280481); +#280480 = CARTESIAN_POINT('',(123.088908,-109.725,0.)); +#280481 = VECTOR('',#280482,1.); +#280482 = DIRECTION('',(1.,0.,0.)); +#280483 = PLANE('',#280484); +#280484 = AXIS2_PLACEMENT_3D('',#280485,#280486,#280487); +#280485 = CARTESIAN_POINT('',(123.088908,-109.725,0.)); +#280486 = DIRECTION('',(0.,-1.,0.)); +#280487 = DIRECTION('',(1.,0.,0.)); +#280488 = ADVANCED_FACE('',(#280489),#280516,.T.); +#280489 = FACE_BOUND('',#280490,.F.); +#280490 = EDGE_LOOP('',(#280491,#280492,#280501,#280509)); +#280491 = ORIENTED_EDGE('',*,*,#280470,.T.); +#280492 = ORIENTED_EDGE('',*,*,#280493,.T.); +#280493 = EDGE_CURVE('',#280463,#280494,#280496,.T.); +#280494 = VERTEX_POINT('',#280495); +#280495 = CARTESIAN_POINT('',(125.,-110.275,-3.5E-02)); +#280496 = CIRCLE('',#280497,0.275); +#280497 = AXIS2_PLACEMENT_3D('',#280498,#280499,#280500); +#280498 = CARTESIAN_POINT('',(125.00000008,-110.,-3.5E-02)); +#280499 = DIRECTION('',(0.,0.,-1.)); +#280500 = DIRECTION('',(-2.90918830036E-07,1.,-0.)); +#280501 = ORIENTED_EDGE('',*,*,#280502,.F.); +#280502 = EDGE_CURVE('',#280503,#280494,#280505,.T.); +#280503 = VERTEX_POINT('',#280504); +#280504 = CARTESIAN_POINT('',(125.,-110.275,0.)); +#280505 = LINE('',#280506,#280507); +#280506 = CARTESIAN_POINT('',(125.,-110.275,0.)); +#280507 = VECTOR('',#280508,1.); +#280508 = DIRECTION('',(0.,0.,-1.)); +#280509 = ORIENTED_EDGE('',*,*,#280510,.F.); +#280510 = EDGE_CURVE('',#280471,#280503,#280511,.T.); +#280511 = CIRCLE('',#280512,0.275); +#280512 = AXIS2_PLACEMENT_3D('',#280513,#280514,#280515); +#280513 = CARTESIAN_POINT('',(125.00000008,-110.,0.)); +#280514 = DIRECTION('',(0.,0.,-1.)); +#280515 = DIRECTION('',(-2.90918830036E-07,1.,-0.)); +#280516 = CYLINDRICAL_SURFACE('',#280517,0.275); +#280517 = AXIS2_PLACEMENT_3D('',#280518,#280519,#280520); +#280518 = CARTESIAN_POINT('',(125.00000008,-110.,0.)); +#280519 = DIRECTION('',(-0.,-0.,1.)); +#280520 = DIRECTION('',(-2.90918830036E-07,1.,-0.)); +#280521 = ADVANCED_FACE('',(#280522),#280547,.F.); +#280522 = FACE_BOUND('',#280523,.F.); +#280523 = EDGE_LOOP('',(#280524,#280525,#280533,#280541)); +#280524 = ORIENTED_EDGE('',*,*,#280502,.T.); +#280525 = ORIENTED_EDGE('',*,*,#280526,.T.); +#280526 = EDGE_CURVE('',#280494,#280527,#280529,.T.); +#280527 = VERTEX_POINT('',#280528); +#280528 = CARTESIAN_POINT('',(123.775,-110.275,-3.5E-02)); +#280529 = LINE('',#280530,#280531); +#280530 = CARTESIAN_POINT('',(125.,-110.275,-3.5E-02)); +#280531 = VECTOR('',#280532,1.); +#280532 = DIRECTION('',(-1.,0.,0.)); +#280533 = ORIENTED_EDGE('',*,*,#280534,.F.); +#280534 = EDGE_CURVE('',#280535,#280527,#280537,.T.); +#280535 = VERTEX_POINT('',#280536); +#280536 = CARTESIAN_POINT('',(123.775,-110.275,0.)); +#280537 = LINE('',#280538,#280539); +#280538 = CARTESIAN_POINT('',(123.775,-110.275,0.)); +#280539 = VECTOR('',#280540,1.); +#280540 = DIRECTION('',(0.,0.,-1.)); +#280541 = ORIENTED_EDGE('',*,*,#280542,.F.); +#280542 = EDGE_CURVE('',#280503,#280535,#280543,.T.); +#280543 = LINE('',#280544,#280545); +#280544 = CARTESIAN_POINT('',(125.,-110.275,0.)); +#280545 = VECTOR('',#280546,1.); +#280546 = DIRECTION('',(-1.,0.,0.)); +#280547 = PLANE('',#280548); +#280548 = AXIS2_PLACEMENT_3D('',#280549,#280550,#280551); +#280549 = CARTESIAN_POINT('',(125.,-110.275,0.)); +#280550 = DIRECTION('',(0.,1.,0.)); +#280551 = DIRECTION('',(-1.,0.,0.)); +#280552 = ADVANCED_FACE('',(#280553),#280578,.F.); +#280553 = FACE_BOUND('',#280554,.F.); +#280554 = EDGE_LOOP('',(#280555,#280556,#280564,#280572)); +#280555 = ORIENTED_EDGE('',*,*,#280534,.T.); +#280556 = ORIENTED_EDGE('',*,*,#280557,.T.); +#280557 = EDGE_CURVE('',#280527,#280558,#280560,.T.); +#280558 = VERTEX_POINT('',#280559); +#280559 = CARTESIAN_POINT('',(123.775,-111.765,-3.5E-02)); +#280560 = LINE('',#280561,#280562); +#280561 = CARTESIAN_POINT('',(123.775,-110.275,-3.5E-02)); +#280562 = VECTOR('',#280563,1.); +#280563 = DIRECTION('',(0.,-1.,0.)); +#280564 = ORIENTED_EDGE('',*,*,#280565,.F.); +#280565 = EDGE_CURVE('',#280566,#280558,#280568,.T.); +#280566 = VERTEX_POINT('',#280567); +#280567 = CARTESIAN_POINT('',(123.775,-111.765,0.)); +#280568 = LINE('',#280569,#280570); +#280569 = CARTESIAN_POINT('',(123.775,-111.765,0.)); +#280570 = VECTOR('',#280571,1.); +#280571 = DIRECTION('',(0.,0.,-1.)); +#280572 = ORIENTED_EDGE('',*,*,#280573,.F.); +#280573 = EDGE_CURVE('',#280535,#280566,#280574,.T.); +#280574 = LINE('',#280575,#280576); +#280575 = CARTESIAN_POINT('',(123.775,-110.275,0.)); +#280576 = VECTOR('',#280577,1.); +#280577 = DIRECTION('',(0.,-1.,0.)); +#280578 = PLANE('',#280579); +#280579 = AXIS2_PLACEMENT_3D('',#280580,#280581,#280582); +#280580 = CARTESIAN_POINT('',(123.775,-110.275,0.)); +#280581 = DIRECTION('',(-1.,-0.,-0.)); +#280582 = DIRECTION('',(0.,-1.,0.)); +#280583 = ADVANCED_FACE('',(#280584),#280611,.T.); +#280584 = FACE_BOUND('',#280585,.F.); +#280585 = EDGE_LOOP('',(#280586,#280587,#280596,#280604)); +#280586 = ORIENTED_EDGE('',*,*,#280565,.T.); +#280587 = ORIENTED_EDGE('',*,*,#280588,.T.); +#280588 = EDGE_CURVE('',#280558,#280589,#280591,.T.); +#280589 = VERTEX_POINT('',#280590); +#280590 = CARTESIAN_POINT('',(123.694454,-111.959455,-3.5E-02)); +#280591 = CIRCLE('',#280592,0.274999582384); +#280592 = AXIS2_PLACEMENT_3D('',#280593,#280594,#280595); +#280593 = CARTESIAN_POINT('',(123.50000041761,-111.7650004433,-3.5E-02) + ); +#280594 = DIRECTION('',(0.,0.,-1.)); +#280595 = DIRECTION('',(0.999999999999,1.61211363937E-06,0.)); +#280596 = ORIENTED_EDGE('',*,*,#280597,.F.); +#280597 = EDGE_CURVE('',#280598,#280589,#280600,.T.); +#280598 = VERTEX_POINT('',#280599); +#280599 = CARTESIAN_POINT('',(123.694454,-111.959455,0.)); +#280600 = LINE('',#280601,#280602); +#280601 = CARTESIAN_POINT('',(123.694454,-111.959455,0.)); +#280602 = VECTOR('',#280603,1.); +#280603 = DIRECTION('',(0.,0.,-1.)); +#280604 = ORIENTED_EDGE('',*,*,#280605,.F.); +#280605 = EDGE_CURVE('',#280566,#280598,#280606,.T.); +#280606 = CIRCLE('',#280607,0.274999582384); +#280607 = AXIS2_PLACEMENT_3D('',#280608,#280609,#280610); +#280608 = CARTESIAN_POINT('',(123.50000041761,-111.7650004433,0.)); +#280609 = DIRECTION('',(0.,0.,-1.)); +#280610 = DIRECTION('',(0.999999999999,1.61211363937E-06,0.)); +#280611 = CYLINDRICAL_SURFACE('',#280612,0.274999582384); +#280612 = AXIS2_PLACEMENT_3D('',#280613,#280614,#280615); +#280613 = CARTESIAN_POINT('',(123.50000041761,-111.7650004433,0.)); +#280614 = DIRECTION('',(-0.,-0.,1.)); +#280615 = DIRECTION('',(0.999999999999,1.61211363937E-06,0.)); +#280616 = ADVANCED_FACE('',(#280617),#280642,.F.); +#280617 = FACE_BOUND('',#280618,.F.); +#280618 = EDGE_LOOP('',(#280619,#280620,#280628,#280636)); +#280619 = ORIENTED_EDGE('',*,*,#280597,.T.); +#280620 = ORIENTED_EDGE('',*,*,#280621,.T.); +#280621 = EDGE_CURVE('',#280589,#280622,#280624,.T.); +#280622 = VERTEX_POINT('',#280623); +#280623 = CARTESIAN_POINT('',(122.719454,-112.934454,-3.5E-02)); +#280624 = LINE('',#280625,#280626); +#280625 = CARTESIAN_POINT('',(123.694454,-111.959455,-3.5E-02)); +#280626 = VECTOR('',#280627,1.); +#280627 = DIRECTION('',(-0.707107143806,-0.707106418567,0.)); +#280628 = ORIENTED_EDGE('',*,*,#280629,.F.); +#280629 = EDGE_CURVE('',#280630,#280622,#280632,.T.); +#280630 = VERTEX_POINT('',#280631); +#280631 = CARTESIAN_POINT('',(122.719454,-112.934454,0.)); +#280632 = LINE('',#280633,#280634); +#280633 = CARTESIAN_POINT('',(122.719454,-112.934454,0.)); +#280634 = VECTOR('',#280635,1.); +#280635 = DIRECTION('',(0.,0.,-1.)); +#280636 = ORIENTED_EDGE('',*,*,#280637,.F.); +#280637 = EDGE_CURVE('',#280598,#280630,#280638,.T.); +#280638 = LINE('',#280639,#280640); +#280639 = CARTESIAN_POINT('',(123.694454,-111.959455,0.)); +#280640 = VECTOR('',#280641,1.); +#280641 = DIRECTION('',(-0.707107143806,-0.707106418567,0.)); +#280642 = PLANE('',#280643); +#280643 = AXIS2_PLACEMENT_3D('',#280644,#280645,#280646); +#280644 = CARTESIAN_POINT('',(123.694454,-111.959455,0.)); +#280645 = DIRECTION('',(-0.707106418567,0.707107143806,0.)); +#280646 = DIRECTION('',(-0.707107143806,-0.707106418567,0.)); +#280647 = ADVANCED_FACE('',(#280648),#280675,.T.); +#280648 = FACE_BOUND('',#280649,.F.); +#280649 = EDGE_LOOP('',(#280650,#280651,#280660,#280668)); +#280650 = ORIENTED_EDGE('',*,*,#280629,.T.); +#280651 = ORIENTED_EDGE('',*,*,#280652,.T.); +#280652 = EDGE_CURVE('',#280622,#280653,#280655,.T.); +#280653 = VERTEX_POINT('',#280654); +#280654 = CARTESIAN_POINT('',(122.330546,-112.545546,-3.5E-02)); +#280655 = CIRCLE('',#280656,0.274999484058); +#280656 = AXIS2_PLACEMENT_3D('',#280657,#280658,#280659); +#280657 = CARTESIAN_POINT('',(122.52499963951,-112.7400003604,-3.5E-02) + ); +#280658 = DIRECTION('',(-0.,0.,-1.)); +#280659 = DIRECTION('',(0.707108092062,-0.707105470309,-0.)); +#280660 = ORIENTED_EDGE('',*,*,#280661,.F.); +#280661 = EDGE_CURVE('',#280662,#280653,#280664,.T.); +#280662 = VERTEX_POINT('',#280663); +#280663 = CARTESIAN_POINT('',(122.330546,-112.545546,0.)); +#280664 = LINE('',#280665,#280666); +#280665 = CARTESIAN_POINT('',(122.330546,-112.545546,0.)); +#280666 = VECTOR('',#280667,1.); +#280667 = DIRECTION('',(0.,0.,-1.)); +#280668 = ORIENTED_EDGE('',*,*,#280669,.F.); +#280669 = EDGE_CURVE('',#280630,#280662,#280670,.T.); +#280670 = CIRCLE('',#280671,0.274999484058); +#280671 = AXIS2_PLACEMENT_3D('',#280672,#280673,#280674); +#280672 = CARTESIAN_POINT('',(122.52499963951,-112.7400003604,0.)); +#280673 = DIRECTION('',(-0.,0.,-1.)); +#280674 = DIRECTION('',(0.707108092062,-0.707105470309,-0.)); +#280675 = CYLINDRICAL_SURFACE('',#280676,0.274999484058); +#280676 = AXIS2_PLACEMENT_3D('',#280677,#280678,#280679); +#280677 = CARTESIAN_POINT('',(122.52499963951,-112.7400003604,0.)); +#280678 = DIRECTION('',(0.,-0.,1.)); +#280679 = DIRECTION('',(0.707108092062,-0.707105470309,-0.)); +#280680 = ADVANCED_FACE('',(#280681),#280706,.F.); +#280681 = FACE_BOUND('',#280682,.F.); +#280682 = EDGE_LOOP('',(#280683,#280684,#280692,#280700)); +#280683 = ORIENTED_EDGE('',*,*,#280661,.T.); +#280684 = ORIENTED_EDGE('',*,*,#280685,.T.); +#280685 = EDGE_CURVE('',#280653,#280686,#280688,.T.); +#280686 = VERTEX_POINT('',#280687); +#280687 = CARTESIAN_POINT('',(123.225,-111.651091,-3.5E-02)); +#280688 = LINE('',#280689,#280690); +#280689 = CARTESIAN_POINT('',(122.330546,-112.545546,-3.5E-02)); +#280690 = VECTOR('',#280691,1.); +#280691 = DIRECTION('',(0.707106385914,0.707107176459,0.)); +#280692 = ORIENTED_EDGE('',*,*,#280693,.F.); +#280693 = EDGE_CURVE('',#280694,#280686,#280696,.T.); +#280694 = VERTEX_POINT('',#280695); +#280695 = CARTESIAN_POINT('',(123.225,-111.651091,0.)); +#280696 = LINE('',#280697,#280698); +#280697 = CARTESIAN_POINT('',(123.225,-111.651091,0.)); +#280698 = VECTOR('',#280699,1.); +#280699 = DIRECTION('',(0.,0.,-1.)); +#280700 = ORIENTED_EDGE('',*,*,#280701,.F.); +#280701 = EDGE_CURVE('',#280662,#280694,#280702,.T.); +#280702 = LINE('',#280703,#280704); +#280703 = CARTESIAN_POINT('',(122.330546,-112.545546,0.)); +#280704 = VECTOR('',#280705,1.); +#280705 = DIRECTION('',(0.707106385914,0.707107176459,0.)); +#280706 = PLANE('',#280707); +#280707 = AXIS2_PLACEMENT_3D('',#280708,#280709,#280710); +#280708 = CARTESIAN_POINT('',(122.330546,-112.545546,0.)); +#280709 = DIRECTION('',(0.707107176459,-0.707106385914,0.)); +#280710 = DIRECTION('',(0.707106385914,0.707107176459,0.)); +#280711 = ADVANCED_FACE('',(#280712),#280737,.F.); +#280712 = FACE_BOUND('',#280713,.F.); +#280713 = EDGE_LOOP('',(#280714,#280715,#280723,#280731)); +#280714 = ORIENTED_EDGE('',*,*,#280693,.T.); +#280715 = ORIENTED_EDGE('',*,*,#280716,.T.); +#280716 = EDGE_CURVE('',#280686,#280717,#280719,.T.); +#280717 = VERTEX_POINT('',#280718); +#280718 = CARTESIAN_POINT('',(123.225,-110.275,-3.5E-02)); +#280719 = LINE('',#280720,#280721); +#280720 = CARTESIAN_POINT('',(123.225,-111.651091,-3.5E-02)); +#280721 = VECTOR('',#280722,1.); +#280722 = DIRECTION('',(0.,1.,0.)); +#280723 = ORIENTED_EDGE('',*,*,#280724,.F.); +#280724 = EDGE_CURVE('',#280725,#280717,#280727,.T.); +#280725 = VERTEX_POINT('',#280726); +#280726 = CARTESIAN_POINT('',(123.225,-110.275,0.)); +#280727 = LINE('',#280728,#280729); +#280728 = CARTESIAN_POINT('',(123.225,-110.275,0.)); +#280729 = VECTOR('',#280730,1.); +#280730 = DIRECTION('',(0.,0.,-1.)); +#280731 = ORIENTED_EDGE('',*,*,#280732,.F.); +#280732 = EDGE_CURVE('',#280694,#280725,#280733,.T.); +#280733 = LINE('',#280734,#280735); +#280734 = CARTESIAN_POINT('',(123.225,-111.651091,0.)); +#280735 = VECTOR('',#280736,1.); +#280736 = DIRECTION('',(0.,1.,0.)); +#280737 = PLANE('',#280738); +#280738 = AXIS2_PLACEMENT_3D('',#280739,#280740,#280741); +#280739 = CARTESIAN_POINT('',(123.225,-111.651091,0.)); +#280740 = DIRECTION('',(1.,-0.,0.)); +#280741 = DIRECTION('',(0.,1.,0.)); +#280742 = ADVANCED_FACE('',(#280743),#280768,.F.); +#280743 = FACE_BOUND('',#280744,.F.); +#280744 = EDGE_LOOP('',(#280745,#280746,#280754,#280762)); +#280745 = ORIENTED_EDGE('',*,*,#280724,.T.); +#280746 = ORIENTED_EDGE('',*,*,#280747,.T.); +#280747 = EDGE_CURVE('',#280717,#280748,#280750,.T.); +#280748 = VERTEX_POINT('',#280749); +#280749 = CARTESIAN_POINT('',(122.975,-110.275,-3.5E-02)); +#280750 = LINE('',#280751,#280752); +#280751 = CARTESIAN_POINT('',(123.225,-110.275,-3.5E-02)); +#280752 = VECTOR('',#280753,1.); +#280753 = DIRECTION('',(-1.,0.,0.)); +#280754 = ORIENTED_EDGE('',*,*,#280755,.F.); +#280755 = EDGE_CURVE('',#280756,#280748,#280758,.T.); +#280756 = VERTEX_POINT('',#280757); +#280757 = CARTESIAN_POINT('',(122.975,-110.275,0.)); +#280758 = LINE('',#280759,#280760); +#280759 = CARTESIAN_POINT('',(122.975,-110.275,0.)); +#280760 = VECTOR('',#280761,1.); +#280761 = DIRECTION('',(0.,0.,-1.)); +#280762 = ORIENTED_EDGE('',*,*,#280763,.F.); +#280763 = EDGE_CURVE('',#280725,#280756,#280764,.T.); +#280764 = LINE('',#280765,#280766); +#280765 = CARTESIAN_POINT('',(123.225,-110.275,0.)); +#280766 = VECTOR('',#280767,1.); +#280767 = DIRECTION('',(-1.,0.,0.)); +#280768 = PLANE('',#280769); +#280769 = AXIS2_PLACEMENT_3D('',#280770,#280771,#280772); +#280770 = CARTESIAN_POINT('',(123.225,-110.275,0.)); +#280771 = DIRECTION('',(0.,1.,0.)); +#280772 = DIRECTION('',(-1.,0.,0.)); +#280773 = ADVANCED_FACE('',(#280774),#280801,.T.); +#280774 = FACE_BOUND('',#280775,.F.); +#280775 = EDGE_LOOP('',(#280776,#280777,#280786,#280794)); +#280776 = ORIENTED_EDGE('',*,*,#280755,.T.); +#280777 = ORIENTED_EDGE('',*,*,#280778,.T.); +#280778 = EDGE_CURVE('',#280748,#280779,#280781,.T.); +#280779 = VERTEX_POINT('',#280780); +#280780 = CARTESIAN_POINT('',(122.780546,-110.194454,-3.5E-02)); +#280781 = CIRCLE('',#280782,0.27499641508); +#280782 = AXIS2_PLACEMENT_3D('',#280783,#280784,#280785); +#280783 = CARTESIAN_POINT('',(122.97499924472,-110.0000035849,-3.5E-02) + ); +#280784 = DIRECTION('',(0.,0.,-1.)); +#280785 = DIRECTION('',(2.746505063333E-06,-0.999999999996,0.)); +#280786 = ORIENTED_EDGE('',*,*,#280787,.F.); +#280787 = EDGE_CURVE('',#280788,#280779,#280790,.T.); +#280788 = VERTEX_POINT('',#280789); +#280789 = CARTESIAN_POINT('',(122.780546,-110.194454,0.)); +#280790 = LINE('',#280791,#280792); +#280791 = CARTESIAN_POINT('',(122.780546,-110.194454,0.)); +#280792 = VECTOR('',#280793,1.); +#280793 = DIRECTION('',(0.,0.,-1.)); +#280794 = ORIENTED_EDGE('',*,*,#280795,.F.); +#280795 = EDGE_CURVE('',#280756,#280788,#280796,.T.); +#280796 = CIRCLE('',#280797,0.27499641508); +#280797 = AXIS2_PLACEMENT_3D('',#280798,#280799,#280800); +#280798 = CARTESIAN_POINT('',(122.97499924472,-110.0000035849,0.)); +#280799 = DIRECTION('',(0.,0.,-1.)); +#280800 = DIRECTION('',(2.746505063333E-06,-0.999999999996,0.)); +#280801 = CYLINDRICAL_SURFACE('',#280802,0.27499641508); +#280802 = AXIS2_PLACEMENT_3D('',#280803,#280804,#280805); +#280803 = CARTESIAN_POINT('',(122.97499924472,-110.0000035849,0.)); +#280804 = DIRECTION('',(-0.,-0.,1.)); +#280805 = DIRECTION('',(2.746505063333E-06,-0.999999999996,0.)); +#280806 = ADVANCED_FACE('',(#280807),#280832,.F.); +#280807 = FACE_BOUND('',#280808,.F.); +#280808 = EDGE_LOOP('',(#280809,#280810,#280818,#280826)); +#280809 = ORIENTED_EDGE('',*,*,#280787,.T.); +#280810 = ORIENTED_EDGE('',*,*,#280811,.T.); +#280811 = EDGE_CURVE('',#280779,#280812,#280814,.T.); +#280812 = VERTEX_POINT('',#280813); +#280813 = CARTESIAN_POINT('',(121.830546,-109.244454,-3.5E-02)); +#280814 = LINE('',#280815,#280816); +#280815 = CARTESIAN_POINT('',(122.780546,-110.194454,-3.5E-02)); +#280816 = VECTOR('',#280817,1.); +#280817 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#280818 = ORIENTED_EDGE('',*,*,#280819,.F.); +#280819 = EDGE_CURVE('',#280820,#280812,#280822,.T.); +#280820 = VERTEX_POINT('',#280821); +#280821 = CARTESIAN_POINT('',(121.830546,-109.244454,0.)); +#280822 = LINE('',#280823,#280824); +#280823 = CARTESIAN_POINT('',(121.830546,-109.244454,0.)); +#280824 = VECTOR('',#280825,1.); +#280825 = DIRECTION('',(0.,0.,-1.)); +#280826 = ORIENTED_EDGE('',*,*,#280827,.F.); +#280827 = EDGE_CURVE('',#280788,#280820,#280828,.T.); +#280828 = LINE('',#280829,#280830); +#280829 = CARTESIAN_POINT('',(122.780546,-110.194454,0.)); +#280830 = VECTOR('',#280831,1.); +#280831 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#280832 = PLANE('',#280833); +#280833 = AXIS2_PLACEMENT_3D('',#280834,#280835,#280836); +#280834 = CARTESIAN_POINT('',(122.780546,-110.194454,0.)); +#280835 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#280836 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#280837 = ADVANCED_FACE('',(#280838),#280865,.T.); +#280838 = FACE_BOUND('',#280839,.F.); +#280839 = EDGE_LOOP('',(#280840,#280841,#280850,#280858)); +#280840 = ORIENTED_EDGE('',*,*,#280819,.T.); +#280841 = ORIENTED_EDGE('',*,*,#280842,.T.); +#280842 = EDGE_CURVE('',#280812,#280843,#280845,.T.); +#280843 = VERTEX_POINT('',#280844); +#280844 = CARTESIAN_POINT('',(121.75,-109.05,-3.5E-02)); +#280845 = CIRCLE('',#280846,0.274993677363); +#280846 = AXIS2_PLACEMENT_3D('',#280847,#280848,#280849); +#280847 = CARTESIAN_POINT('',(122.02499367735,-109.0500018892,-3.5E-02) + ); +#280848 = DIRECTION('',(0.,0.,-1.)); +#280849 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#280850 = ORIENTED_EDGE('',*,*,#280851,.F.); +#280851 = EDGE_CURVE('',#280852,#280843,#280854,.T.); +#280852 = VERTEX_POINT('',#280853); +#280853 = CARTESIAN_POINT('',(121.75,-109.05,0.)); +#280854 = LINE('',#280855,#280856); +#280855 = CARTESIAN_POINT('',(121.75,-109.05,0.)); +#280856 = VECTOR('',#280857,1.); +#280857 = DIRECTION('',(0.,0.,-1.)); +#280858 = ORIENTED_EDGE('',*,*,#280859,.F.); +#280859 = EDGE_CURVE('',#280820,#280852,#280860,.T.); +#280860 = CIRCLE('',#280861,0.274993677363); +#280861 = AXIS2_PLACEMENT_3D('',#280862,#280863,#280864); +#280862 = CARTESIAN_POINT('',(122.02499367735,-109.0500018892,0.)); +#280863 = DIRECTION('',(0.,0.,-1.)); +#280864 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#280865 = CYLINDRICAL_SURFACE('',#280866,0.274993677363); +#280866 = AXIS2_PLACEMENT_3D('',#280867,#280868,#280869); +#280867 = CARTESIAN_POINT('',(122.02499367735,-109.0500018892,0.)); +#280868 = DIRECTION('',(-0.,-0.,1.)); +#280869 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#280870 = ADVANCED_FACE('',(#280871),#280896,.F.); +#280871 = FACE_BOUND('',#280872,.F.); +#280872 = EDGE_LOOP('',(#280873,#280874,#280882,#280890)); +#280873 = ORIENTED_EDGE('',*,*,#280851,.T.); +#280874 = ORIENTED_EDGE('',*,*,#280875,.T.); +#280875 = EDGE_CURVE('',#280843,#280876,#280878,.T.); +#280876 = VERTEX_POINT('',#280877); +#280877 = CARTESIAN_POINT('',(121.75,-107.975,-3.5E-02)); +#280878 = LINE('',#280879,#280880); +#280879 = CARTESIAN_POINT('',(121.75,-109.05,-3.5E-02)); +#280880 = VECTOR('',#280881,1.); +#280881 = DIRECTION('',(0.,1.,0.)); +#280882 = ORIENTED_EDGE('',*,*,#280883,.F.); +#280883 = EDGE_CURVE('',#280884,#280876,#280886,.T.); +#280884 = VERTEX_POINT('',#280885); +#280885 = CARTESIAN_POINT('',(121.75,-107.975,0.)); +#280886 = LINE('',#280887,#280888); +#280887 = CARTESIAN_POINT('',(121.75,-107.975,0.)); +#280888 = VECTOR('',#280889,1.); +#280889 = DIRECTION('',(0.,0.,-1.)); +#280890 = ORIENTED_EDGE('',*,*,#280891,.F.); +#280891 = EDGE_CURVE('',#280852,#280884,#280892,.T.); +#280892 = LINE('',#280893,#280894); +#280893 = CARTESIAN_POINT('',(121.75,-109.05,0.)); +#280894 = VECTOR('',#280895,1.); +#280895 = DIRECTION('',(0.,1.,0.)); +#280896 = PLANE('',#280897); +#280897 = AXIS2_PLACEMENT_3D('',#280898,#280899,#280900); +#280898 = CARTESIAN_POINT('',(121.75,-109.05,0.)); +#280899 = DIRECTION('',(1.,-0.,0.)); +#280900 = DIRECTION('',(0.,1.,0.)); +#280901 = ADVANCED_FACE('',(#280902),#280929,.T.); +#280902 = FACE_BOUND('',#280903,.F.); +#280903 = EDGE_LOOP('',(#280904,#280905,#280914,#280922)); +#280904 = ORIENTED_EDGE('',*,*,#280883,.T.); +#280905 = ORIENTED_EDGE('',*,*,#280906,.T.); +#280906 = EDGE_CURVE('',#280876,#280907,#280909,.T.); +#280907 = VERTEX_POINT('',#280908); +#280908 = CARTESIAN_POINT('',(121.830546,-107.780546,-3.5E-02)); +#280909 = CIRCLE('',#280910,0.27499641508); +#280910 = AXIS2_PLACEMENT_3D('',#280911,#280912,#280913); +#280911 = CARTESIAN_POINT('',(122.02499641507,-107.9749992447,-3.5E-02) + ); +#280912 = DIRECTION('',(0.,0.,-1.)); +#280913 = DIRECTION('',(-0.999999999996,-2.746505063332E-06,-0.)); +#280914 = ORIENTED_EDGE('',*,*,#280915,.F.); +#280915 = EDGE_CURVE('',#280916,#280907,#280918,.T.); +#280916 = VERTEX_POINT('',#280917); +#280917 = CARTESIAN_POINT('',(121.830546,-107.780546,0.)); +#280918 = LINE('',#280919,#280920); +#280919 = CARTESIAN_POINT('',(121.830546,-107.780546,0.)); +#280920 = VECTOR('',#280921,1.); +#280921 = DIRECTION('',(0.,0.,-1.)); +#280922 = ORIENTED_EDGE('',*,*,#280923,.F.); +#280923 = EDGE_CURVE('',#280884,#280916,#280924,.T.); +#280924 = CIRCLE('',#280925,0.27499641508); +#280925 = AXIS2_PLACEMENT_3D('',#280926,#280927,#280928); +#280926 = CARTESIAN_POINT('',(122.02499641507,-107.9749992447,0.)); +#280927 = DIRECTION('',(0.,0.,-1.)); +#280928 = DIRECTION('',(-0.999999999996,-2.746505063332E-06,-0.)); +#280929 = CYLINDRICAL_SURFACE('',#280930,0.27499641508); +#280930 = AXIS2_PLACEMENT_3D('',#280931,#280932,#280933); +#280931 = CARTESIAN_POINT('',(122.02499641507,-107.9749992447,0.)); +#280932 = DIRECTION('',(-0.,-0.,1.)); +#280933 = DIRECTION('',(-0.999999999996,-2.746505063332E-06,-0.)); +#280934 = ADVANCED_FACE('',(#280935),#280960,.F.); +#280935 = FACE_BOUND('',#280936,.F.); +#280936 = EDGE_LOOP('',(#280937,#280938,#280946,#280954)); +#280937 = ORIENTED_EDGE('',*,*,#280915,.T.); +#280938 = ORIENTED_EDGE('',*,*,#280939,.T.); +#280939 = EDGE_CURVE('',#280907,#280940,#280942,.T.); +#280940 = VERTEX_POINT('',#280941); +#280941 = CARTESIAN_POINT('',(122.222836,-107.385195,-3.5E-02)); +#280942 = LINE('',#280943,#280944); +#280943 = CARTESIAN_POINT('',(121.830546,-107.780546,-3.5E-02)); +#280944 = VECTOR('',#280945,1.); +#280945 = DIRECTION('',(0.70435344139,0.709849441503,0.)); +#280946 = ORIENTED_EDGE('',*,*,#280947,.F.); +#280947 = EDGE_CURVE('',#280948,#280940,#280950,.T.); +#280948 = VERTEX_POINT('',#280949); +#280949 = CARTESIAN_POINT('',(122.222836,-107.385195,0.)); +#280950 = LINE('',#280951,#280952); +#280951 = CARTESIAN_POINT('',(122.222836,-107.385195,0.)); +#280952 = VECTOR('',#280953,1.); +#280953 = DIRECTION('',(0.,0.,-1.)); +#280954 = ORIENTED_EDGE('',*,*,#280955,.F.); +#280955 = EDGE_CURVE('',#280916,#280948,#280956,.T.); +#280956 = LINE('',#280957,#280958); +#280957 = CARTESIAN_POINT('',(121.830546,-107.780546,0.)); +#280958 = VECTOR('',#280959,1.); +#280959 = DIRECTION('',(0.70435344139,0.709849441503,0.)); +#280960 = PLANE('',#280961); +#280961 = AXIS2_PLACEMENT_3D('',#280962,#280963,#280964); +#280962 = CARTESIAN_POINT('',(121.830546,-107.780546,0.)); +#280963 = DIRECTION('',(0.709849441503,-0.70435344139,0.)); +#280964 = DIRECTION('',(0.70435344139,0.709849441503,0.)); +#280965 = ADVANCED_FACE('',(#280966),#280993,.T.); +#280966 = FACE_BOUND('',#280967,.F.); +#280967 = EDGE_LOOP('',(#280968,#280969,#280978,#280986)); +#280968 = ORIENTED_EDGE('',*,*,#280947,.T.); +#280969 = ORIENTED_EDGE('',*,*,#280970,.T.); +#280970 = EDGE_CURVE('',#280940,#280971,#280973,.T.); +#280971 = VERTEX_POINT('',#280972); +#280972 = CARTESIAN_POINT('',(122.610624,-107.778284,-3.5E-02)); +#280973 = CIRCLE('',#280974,0.299701177641); +#280974 = AXIS2_PLACEMENT_3D('',#280975,#280976,#280977); +#280975 = CARTESIAN_POINT('',(122.49973831121,-107.499850597,-3.5E-02)); +#280976 = DIRECTION('',(0.,0.,-1.)); +#280977 = DIRECTION('',(-0.92392800519,0.382566387997,0.)); +#280978 = ORIENTED_EDGE('',*,*,#280979,.F.); +#280979 = EDGE_CURVE('',#280980,#280971,#280982,.T.); +#280980 = VERTEX_POINT('',#280981); +#280981 = CARTESIAN_POINT('',(122.610624,-107.778284,0.)); +#280982 = LINE('',#280983,#280984); +#280983 = CARTESIAN_POINT('',(122.610624,-107.778284,0.)); +#280984 = VECTOR('',#280985,1.); +#280985 = DIRECTION('',(0.,0.,-1.)); +#280986 = ORIENTED_EDGE('',*,*,#280987,.F.); +#280987 = EDGE_CURVE('',#280948,#280980,#280988,.T.); +#280988 = CIRCLE('',#280989,0.299701177641); +#280989 = AXIS2_PLACEMENT_3D('',#280990,#280991,#280992); +#280990 = CARTESIAN_POINT('',(122.49973831121,-107.499850597,0.)); +#280991 = DIRECTION('',(0.,0.,-1.)); +#280992 = DIRECTION('',(-0.92392800519,0.382566387997,0.)); +#280993 = CYLINDRICAL_SURFACE('',#280994,0.299701177641); +#280994 = AXIS2_PLACEMENT_3D('',#280995,#280996,#280997); +#280995 = CARTESIAN_POINT('',(122.49973831121,-107.499850597,0.)); +#280996 = DIRECTION('',(-0.,-0.,1.)); +#280997 = DIRECTION('',(-0.92392800519,0.382566387997,0.)); +#280998 = ADVANCED_FACE('',(#280999),#281015,.F.); +#280999 = FACE_BOUND('',#281000,.F.); +#281000 = EDGE_LOOP('',(#281001,#281002,#281008,#281009)); +#281001 = ORIENTED_EDGE('',*,*,#280979,.T.); +#281002 = ORIENTED_EDGE('',*,*,#281003,.T.); +#281003 = EDGE_CURVE('',#280971,#280393,#281004,.T.); +#281004 = LINE('',#281005,#281006); +#281005 = CARTESIAN_POINT('',(122.610624,-107.778284,-3.5E-02)); +#281006 = VECTOR('',#281007,1.); +#281007 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#281008 = ORIENTED_EDGE('',*,*,#280390,.F.); +#281009 = ORIENTED_EDGE('',*,*,#281010,.F.); +#281010 = EDGE_CURVE('',#280980,#280391,#281011,.T.); +#281011 = LINE('',#281012,#281013); +#281012 = CARTESIAN_POINT('',(122.610624,-107.778284,0.)); +#281013 = VECTOR('',#281014,1.); +#281014 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#281015 = PLANE('',#281016); +#281016 = AXIS2_PLACEMENT_3D('',#281017,#281018,#281019); +#281017 = CARTESIAN_POINT('',(122.610624,-107.778284,0.)); +#281018 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#281019 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#281020 = ADVANCED_FACE('',(#281021),#281048,.F.); +#281021 = FACE_BOUND('',#281022,.F.); +#281022 = EDGE_LOOP('',(#281023,#281033,#281040,#281041)); +#281023 = ORIENTED_EDGE('',*,*,#281024,.T.); +#281024 = EDGE_CURVE('',#281025,#281027,#281029,.T.); +#281025 = VERTEX_POINT('',#281026); +#281026 = CARTESIAN_POINT('',(122.637255,-107.5,0.)); +#281027 = VERTEX_POINT('',#281028); +#281028 = CARTESIAN_POINT('',(122.637255,-107.5,-3.5E-02)); +#281029 = LINE('',#281030,#281031); +#281030 = CARTESIAN_POINT('',(122.637255,-107.5,0.)); +#281031 = VECTOR('',#281032,1.); +#281032 = DIRECTION('',(0.,0.,-1.)); +#281033 = ORIENTED_EDGE('',*,*,#281034,.T.); +#281034 = EDGE_CURVE('',#281027,#281027,#281035,.T.); +#281035 = CIRCLE('',#281036,0.137255); +#281036 = AXIS2_PLACEMENT_3D('',#281037,#281038,#281039); +#281037 = CARTESIAN_POINT('',(122.5,-107.5,-3.5E-02)); +#281038 = DIRECTION('',(0.,0.,1.)); +#281039 = DIRECTION('',(1.,0.,-0.)); +#281040 = ORIENTED_EDGE('',*,*,#281024,.F.); +#281041 = ORIENTED_EDGE('',*,*,#281042,.F.); +#281042 = EDGE_CURVE('',#281025,#281025,#281043,.T.); +#281043 = CIRCLE('',#281044,0.137255); +#281044 = AXIS2_PLACEMENT_3D('',#281045,#281046,#281047); +#281045 = CARTESIAN_POINT('',(122.5,-107.5,0.)); +#281046 = DIRECTION('',(0.,0.,1.)); +#281047 = DIRECTION('',(1.,0.,-0.)); +#281048 = CYLINDRICAL_SURFACE('',#281049,0.137255); +#281049 = AXIS2_PLACEMENT_3D('',#281050,#281051,#281052); +#281050 = CARTESIAN_POINT('',(122.5,-107.5,0.)); +#281051 = DIRECTION('',(0.,0.,1.)); +#281052 = DIRECTION('',(1.,0.,-0.)); +#281053 = ADVANCED_FACE('',(#281054,#281076),#281079,.F.); +#281054 = FACE_BOUND('',#281055,.F.); +#281055 = EDGE_LOOP('',(#281056,#281057,#281058,#281059,#281060,#281061, + #281062,#281063,#281064,#281065,#281066,#281067,#281068,#281069, + #281070,#281071,#281072,#281073,#281074,#281075)); +#281056 = ORIENTED_EDGE('',*,*,#280416,.T.); +#281057 = ORIENTED_EDGE('',*,*,#280447,.T.); +#281058 = ORIENTED_EDGE('',*,*,#280478,.T.); +#281059 = ORIENTED_EDGE('',*,*,#280510,.T.); +#281060 = ORIENTED_EDGE('',*,*,#280542,.T.); +#281061 = ORIENTED_EDGE('',*,*,#280573,.T.); +#281062 = ORIENTED_EDGE('',*,*,#280605,.T.); +#281063 = ORIENTED_EDGE('',*,*,#280637,.T.); +#281064 = ORIENTED_EDGE('',*,*,#280669,.T.); +#281065 = ORIENTED_EDGE('',*,*,#280701,.T.); +#281066 = ORIENTED_EDGE('',*,*,#280732,.T.); +#281067 = ORIENTED_EDGE('',*,*,#280763,.T.); +#281068 = ORIENTED_EDGE('',*,*,#280795,.T.); +#281069 = ORIENTED_EDGE('',*,*,#280827,.T.); +#281070 = ORIENTED_EDGE('',*,*,#280859,.T.); +#281071 = ORIENTED_EDGE('',*,*,#280891,.T.); +#281072 = ORIENTED_EDGE('',*,*,#280923,.T.); +#281073 = ORIENTED_EDGE('',*,*,#280955,.T.); +#281074 = ORIENTED_EDGE('',*,*,#280987,.T.); +#281075 = ORIENTED_EDGE('',*,*,#281010,.T.); +#281076 = FACE_BOUND('',#281077,.F.); +#281077 = EDGE_LOOP('',(#281078)); +#281078 = ORIENTED_EDGE('',*,*,#281042,.T.); +#281079 = PLANE('',#281080); +#281080 = AXIS2_PLACEMENT_3D('',#281081,#281082,#281083); +#281081 = CARTESIAN_POINT('',(0.,0.,0.)); +#281082 = DIRECTION('',(-0.,-0.,-1.)); +#281083 = DIRECTION('',(-1.,0.,0.)); +#281084 = ADVANCED_FACE('',(#281085,#281107),#281110,.T.); +#281085 = FACE_BOUND('',#281086,.T.); +#281086 = EDGE_LOOP('',(#281087,#281088,#281089,#281090,#281091,#281092, + #281093,#281094,#281095,#281096,#281097,#281098,#281099,#281100, + #281101,#281102,#281103,#281104,#281105,#281106)); +#281087 = ORIENTED_EDGE('',*,*,#280400,.T.); +#281088 = ORIENTED_EDGE('',*,*,#280431,.T.); +#281089 = ORIENTED_EDGE('',*,*,#280462,.T.); +#281090 = ORIENTED_EDGE('',*,*,#280493,.T.); +#281091 = ORIENTED_EDGE('',*,*,#280526,.T.); +#281092 = ORIENTED_EDGE('',*,*,#280557,.T.); +#281093 = ORIENTED_EDGE('',*,*,#280588,.T.); +#281094 = ORIENTED_EDGE('',*,*,#280621,.T.); +#281095 = ORIENTED_EDGE('',*,*,#280652,.T.); +#281096 = ORIENTED_EDGE('',*,*,#280685,.T.); +#281097 = ORIENTED_EDGE('',*,*,#280716,.T.); +#281098 = ORIENTED_EDGE('',*,*,#280747,.T.); +#281099 = ORIENTED_EDGE('',*,*,#280778,.T.); +#281100 = ORIENTED_EDGE('',*,*,#280811,.T.); +#281101 = ORIENTED_EDGE('',*,*,#280842,.T.); +#281102 = ORIENTED_EDGE('',*,*,#280875,.T.); +#281103 = ORIENTED_EDGE('',*,*,#280906,.T.); +#281104 = ORIENTED_EDGE('',*,*,#280939,.T.); +#281105 = ORIENTED_EDGE('',*,*,#280970,.T.); +#281106 = ORIENTED_EDGE('',*,*,#281003,.T.); +#281107 = FACE_BOUND('',#281108,.T.); +#281108 = EDGE_LOOP('',(#281109)); +#281109 = ORIENTED_EDGE('',*,*,#281034,.T.); +#281110 = PLANE('',#281111); +#281111 = AXIS2_PLACEMENT_3D('',#281112,#281113,#281114); +#281112 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281113 = DIRECTION('',(-0.,-0.,-1.)); +#281114 = DIRECTION('',(-1.,0.,0.)); +#281115 = MANIFOLD_SOLID_BREP('',#281116); +#281116 = CLOSED_SHELL('',(#281117,#281150,#281183,#281195)); +#281117 = ADVANCED_FACE('',(#281118),#281145,.T.); +#281118 = FACE_BOUND('',#281119,.T.); +#281119 = EDGE_LOOP('',(#281120,#281130,#281137,#281138)); +#281120 = ORIENTED_EDGE('',*,*,#281121,.T.); +#281121 = EDGE_CURVE('',#281122,#281124,#281126,.T.); +#281122 = VERTEX_POINT('',#281123); +#281123 = CARTESIAN_POINT('',(148.3,-91.5,0.)); +#281124 = VERTEX_POINT('',#281125); +#281125 = CARTESIAN_POINT('',(148.3,-91.5,-3.5E-02)); +#281126 = LINE('',#281127,#281128); +#281127 = CARTESIAN_POINT('',(148.3,-91.5,0.)); +#281128 = VECTOR('',#281129,1.); +#281129 = DIRECTION('',(0.,0.,-1.)); +#281130 = ORIENTED_EDGE('',*,*,#281131,.T.); +#281131 = EDGE_CURVE('',#281124,#281124,#281132,.T.); +#281132 = CIRCLE('',#281133,0.3); +#281133 = AXIS2_PLACEMENT_3D('',#281134,#281135,#281136); +#281134 = CARTESIAN_POINT('',(148.,-91.5,-3.5E-02)); +#281135 = DIRECTION('',(0.,0.,1.)); +#281136 = DIRECTION('',(1.,0.,-0.)); +#281137 = ORIENTED_EDGE('',*,*,#281121,.F.); +#281138 = ORIENTED_EDGE('',*,*,#281139,.F.); +#281139 = EDGE_CURVE('',#281122,#281122,#281140,.T.); +#281140 = CIRCLE('',#281141,0.3); +#281141 = AXIS2_PLACEMENT_3D('',#281142,#281143,#281144); +#281142 = CARTESIAN_POINT('',(148.,-91.5,0.)); +#281143 = DIRECTION('',(0.,0.,1.)); +#281144 = DIRECTION('',(1.,0.,-0.)); +#281145 = CYLINDRICAL_SURFACE('',#281146,0.3); +#281146 = AXIS2_PLACEMENT_3D('',#281147,#281148,#281149); +#281147 = CARTESIAN_POINT('',(148.,-91.5,0.)); +#281148 = DIRECTION('',(0.,0.,1.)); +#281149 = DIRECTION('',(1.,0.,-0.)); +#281150 = ADVANCED_FACE('',(#281151),#281178,.F.); +#281151 = FACE_BOUND('',#281152,.F.); +#281152 = EDGE_LOOP('',(#281153,#281163,#281170,#281171)); +#281153 = ORIENTED_EDGE('',*,*,#281154,.T.); +#281154 = EDGE_CURVE('',#281155,#281157,#281159,.T.); +#281155 = VERTEX_POINT('',#281156); +#281156 = CARTESIAN_POINT('',(148.137255,-91.5,0.)); +#281157 = VERTEX_POINT('',#281158); +#281158 = CARTESIAN_POINT('',(148.137255,-91.5,-3.5E-02)); +#281159 = LINE('',#281160,#281161); +#281160 = CARTESIAN_POINT('',(148.137255,-91.5,0.)); +#281161 = VECTOR('',#281162,1.); +#281162 = DIRECTION('',(0.,0.,-1.)); +#281163 = ORIENTED_EDGE('',*,*,#281164,.T.); +#281164 = EDGE_CURVE('',#281157,#281157,#281165,.T.); +#281165 = CIRCLE('',#281166,0.137255); +#281166 = AXIS2_PLACEMENT_3D('',#281167,#281168,#281169); +#281167 = CARTESIAN_POINT('',(148.,-91.5,-3.5E-02)); +#281168 = DIRECTION('',(0.,0.,1.)); +#281169 = DIRECTION('',(1.,0.,-0.)); +#281170 = ORIENTED_EDGE('',*,*,#281154,.F.); +#281171 = ORIENTED_EDGE('',*,*,#281172,.F.); +#281172 = EDGE_CURVE('',#281155,#281155,#281173,.T.); +#281173 = CIRCLE('',#281174,0.137255); +#281174 = AXIS2_PLACEMENT_3D('',#281175,#281176,#281177); +#281175 = CARTESIAN_POINT('',(148.,-91.5,0.)); +#281176 = DIRECTION('',(0.,0.,1.)); +#281177 = DIRECTION('',(1.,0.,-0.)); +#281178 = CYLINDRICAL_SURFACE('',#281179,0.137255); +#281179 = AXIS2_PLACEMENT_3D('',#281180,#281181,#281182); +#281180 = CARTESIAN_POINT('',(148.,-91.5,0.)); +#281181 = DIRECTION('',(0.,0.,1.)); +#281182 = DIRECTION('',(1.,0.,-0.)); +#281183 = ADVANCED_FACE('',(#281184,#281187),#281190,.F.); +#281184 = FACE_BOUND('',#281185,.T.); +#281185 = EDGE_LOOP('',(#281186)); +#281186 = ORIENTED_EDGE('',*,*,#281139,.T.); +#281187 = FACE_BOUND('',#281188,.F.); +#281188 = EDGE_LOOP('',(#281189)); +#281189 = ORIENTED_EDGE('',*,*,#281172,.T.); +#281190 = PLANE('',#281191); +#281191 = AXIS2_PLACEMENT_3D('',#281192,#281193,#281194); +#281192 = CARTESIAN_POINT('',(0.,0.,0.)); +#281193 = DIRECTION('',(-0.,-0.,-1.)); +#281194 = DIRECTION('',(-1.,0.,0.)); +#281195 = ADVANCED_FACE('',(#281196,#281199),#281202,.T.); +#281196 = FACE_BOUND('',#281197,.F.); +#281197 = EDGE_LOOP('',(#281198)); +#281198 = ORIENTED_EDGE('',*,*,#281131,.T.); +#281199 = FACE_BOUND('',#281200,.T.); +#281200 = EDGE_LOOP('',(#281201)); +#281201 = ORIENTED_EDGE('',*,*,#281164,.T.); +#281202 = PLANE('',#281203); +#281203 = AXIS2_PLACEMENT_3D('',#281204,#281205,#281206); +#281204 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281205 = DIRECTION('',(-0.,-0.,-1.)); +#281206 = DIRECTION('',(-1.,0.,0.)); +#281207 = MANIFOLD_SOLID_BREP('',#281208); +#281208 = CLOSED_SHELL('',(#281209,#281242,#281275,#281287)); +#281209 = ADVANCED_FACE('',(#281210),#281237,.T.); +#281210 = FACE_BOUND('',#281211,.T.); +#281211 = EDGE_LOOP('',(#281212,#281222,#281229,#281230)); +#281212 = ORIENTED_EDGE('',*,*,#281213,.T.); +#281213 = EDGE_CURVE('',#281214,#281216,#281218,.T.); +#281214 = VERTEX_POINT('',#281215); +#281215 = CARTESIAN_POINT('',(135.8,-88.,0.)); +#281216 = VERTEX_POINT('',#281217); +#281217 = CARTESIAN_POINT('',(135.8,-88.,-3.5E-02)); +#281218 = LINE('',#281219,#281220); +#281219 = CARTESIAN_POINT('',(135.8,-88.,0.)); +#281220 = VECTOR('',#281221,1.); +#281221 = DIRECTION('',(0.,0.,-1.)); +#281222 = ORIENTED_EDGE('',*,*,#281223,.T.); +#281223 = EDGE_CURVE('',#281216,#281216,#281224,.T.); +#281224 = CIRCLE('',#281225,0.3); +#281225 = AXIS2_PLACEMENT_3D('',#281226,#281227,#281228); +#281226 = CARTESIAN_POINT('',(135.5,-88.,-3.5E-02)); +#281227 = DIRECTION('',(0.,0.,1.)); +#281228 = DIRECTION('',(1.,0.,-0.)); +#281229 = ORIENTED_EDGE('',*,*,#281213,.F.); +#281230 = ORIENTED_EDGE('',*,*,#281231,.F.); +#281231 = EDGE_CURVE('',#281214,#281214,#281232,.T.); +#281232 = CIRCLE('',#281233,0.3); +#281233 = AXIS2_PLACEMENT_3D('',#281234,#281235,#281236); +#281234 = CARTESIAN_POINT('',(135.5,-88.,0.)); +#281235 = DIRECTION('',(0.,0.,1.)); +#281236 = DIRECTION('',(1.,0.,-0.)); +#281237 = CYLINDRICAL_SURFACE('',#281238,0.3); +#281238 = AXIS2_PLACEMENT_3D('',#281239,#281240,#281241); +#281239 = CARTESIAN_POINT('',(135.5,-88.,0.)); +#281240 = DIRECTION('',(0.,0.,1.)); +#281241 = DIRECTION('',(1.,0.,-0.)); +#281242 = ADVANCED_FACE('',(#281243),#281270,.F.); +#281243 = FACE_BOUND('',#281244,.F.); +#281244 = EDGE_LOOP('',(#281245,#281255,#281262,#281263)); +#281245 = ORIENTED_EDGE('',*,*,#281246,.T.); +#281246 = EDGE_CURVE('',#281247,#281249,#281251,.T.); +#281247 = VERTEX_POINT('',#281248); +#281248 = CARTESIAN_POINT('',(135.637255,-88.,0.)); +#281249 = VERTEX_POINT('',#281250); +#281250 = CARTESIAN_POINT('',(135.637255,-88.,-3.5E-02)); +#281251 = LINE('',#281252,#281253); +#281252 = CARTESIAN_POINT('',(135.637255,-88.,0.)); +#281253 = VECTOR('',#281254,1.); +#281254 = DIRECTION('',(0.,0.,-1.)); +#281255 = ORIENTED_EDGE('',*,*,#281256,.T.); +#281256 = EDGE_CURVE('',#281249,#281249,#281257,.T.); +#281257 = CIRCLE('',#281258,0.137255); +#281258 = AXIS2_PLACEMENT_3D('',#281259,#281260,#281261); +#281259 = CARTESIAN_POINT('',(135.5,-88.,-3.5E-02)); +#281260 = DIRECTION('',(0.,0.,1.)); +#281261 = DIRECTION('',(1.,0.,-0.)); +#281262 = ORIENTED_EDGE('',*,*,#281246,.F.); +#281263 = ORIENTED_EDGE('',*,*,#281264,.F.); +#281264 = EDGE_CURVE('',#281247,#281247,#281265,.T.); +#281265 = CIRCLE('',#281266,0.137255); +#281266 = AXIS2_PLACEMENT_3D('',#281267,#281268,#281269); +#281267 = CARTESIAN_POINT('',(135.5,-88.,0.)); +#281268 = DIRECTION('',(0.,0.,1.)); +#281269 = DIRECTION('',(1.,0.,-0.)); +#281270 = CYLINDRICAL_SURFACE('',#281271,0.137255); +#281271 = AXIS2_PLACEMENT_3D('',#281272,#281273,#281274); +#281272 = CARTESIAN_POINT('',(135.5,-88.,0.)); +#281273 = DIRECTION('',(0.,0.,1.)); +#281274 = DIRECTION('',(1.,0.,-0.)); +#281275 = ADVANCED_FACE('',(#281276,#281279),#281282,.F.); +#281276 = FACE_BOUND('',#281277,.T.); +#281277 = EDGE_LOOP('',(#281278)); +#281278 = ORIENTED_EDGE('',*,*,#281231,.T.); +#281279 = FACE_BOUND('',#281280,.F.); +#281280 = EDGE_LOOP('',(#281281)); +#281281 = ORIENTED_EDGE('',*,*,#281264,.T.); +#281282 = PLANE('',#281283); +#281283 = AXIS2_PLACEMENT_3D('',#281284,#281285,#281286); +#281284 = CARTESIAN_POINT('',(0.,0.,0.)); +#281285 = DIRECTION('',(-0.,-0.,-1.)); +#281286 = DIRECTION('',(-1.,0.,0.)); +#281287 = ADVANCED_FACE('',(#281288,#281291),#281294,.T.); +#281288 = FACE_BOUND('',#281289,.F.); +#281289 = EDGE_LOOP('',(#281290)); +#281290 = ORIENTED_EDGE('',*,*,#281223,.T.); +#281291 = FACE_BOUND('',#281292,.T.); +#281292 = EDGE_LOOP('',(#281293)); +#281293 = ORIENTED_EDGE('',*,*,#281256,.T.); +#281294 = PLANE('',#281295); +#281295 = AXIS2_PLACEMENT_3D('',#281296,#281297,#281298); +#281296 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281297 = DIRECTION('',(-0.,-0.,-1.)); +#281298 = DIRECTION('',(-1.,0.,0.)); +#281299 = MANIFOLD_SOLID_BREP('',#281300); +#281300 = CLOSED_SHELL('',(#281301,#281334,#281367,#281379)); +#281301 = ADVANCED_FACE('',(#281302),#281329,.T.); +#281302 = FACE_BOUND('',#281303,.T.); +#281303 = EDGE_LOOP('',(#281304,#281314,#281321,#281322)); +#281304 = ORIENTED_EDGE('',*,*,#281305,.T.); +#281305 = EDGE_CURVE('',#281306,#281308,#281310,.T.); +#281306 = VERTEX_POINT('',#281307); +#281307 = CARTESIAN_POINT('',(122.9,-86.3,0.)); +#281308 = VERTEX_POINT('',#281309); +#281309 = CARTESIAN_POINT('',(122.9,-86.3,-3.5E-02)); +#281310 = LINE('',#281311,#281312); +#281311 = CARTESIAN_POINT('',(122.9,-86.3,0.)); +#281312 = VECTOR('',#281313,1.); +#281313 = DIRECTION('',(0.,0.,-1.)); +#281314 = ORIENTED_EDGE('',*,*,#281315,.T.); +#281315 = EDGE_CURVE('',#281308,#281308,#281316,.T.); +#281316 = CIRCLE('',#281317,0.3); +#281317 = AXIS2_PLACEMENT_3D('',#281318,#281319,#281320); +#281318 = CARTESIAN_POINT('',(122.6,-86.3,-3.5E-02)); +#281319 = DIRECTION('',(0.,0.,1.)); +#281320 = DIRECTION('',(1.,0.,-0.)); +#281321 = ORIENTED_EDGE('',*,*,#281305,.F.); +#281322 = ORIENTED_EDGE('',*,*,#281323,.F.); +#281323 = EDGE_CURVE('',#281306,#281306,#281324,.T.); +#281324 = CIRCLE('',#281325,0.3); +#281325 = AXIS2_PLACEMENT_3D('',#281326,#281327,#281328); +#281326 = CARTESIAN_POINT('',(122.6,-86.3,0.)); +#281327 = DIRECTION('',(0.,0.,1.)); +#281328 = DIRECTION('',(1.,0.,-0.)); +#281329 = CYLINDRICAL_SURFACE('',#281330,0.3); +#281330 = AXIS2_PLACEMENT_3D('',#281331,#281332,#281333); +#281331 = CARTESIAN_POINT('',(122.6,-86.3,0.)); +#281332 = DIRECTION('',(0.,0.,1.)); +#281333 = DIRECTION('',(1.,0.,-0.)); +#281334 = ADVANCED_FACE('',(#281335),#281362,.F.); +#281335 = FACE_BOUND('',#281336,.F.); +#281336 = EDGE_LOOP('',(#281337,#281347,#281354,#281355)); +#281337 = ORIENTED_EDGE('',*,*,#281338,.T.); +#281338 = EDGE_CURVE('',#281339,#281341,#281343,.T.); +#281339 = VERTEX_POINT('',#281340); +#281340 = CARTESIAN_POINT('',(122.737255,-86.3,0.)); +#281341 = VERTEX_POINT('',#281342); +#281342 = CARTESIAN_POINT('',(122.737255,-86.3,-3.5E-02)); +#281343 = LINE('',#281344,#281345); +#281344 = CARTESIAN_POINT('',(122.737255,-86.3,0.)); +#281345 = VECTOR('',#281346,1.); +#281346 = DIRECTION('',(0.,0.,-1.)); +#281347 = ORIENTED_EDGE('',*,*,#281348,.T.); +#281348 = EDGE_CURVE('',#281341,#281341,#281349,.T.); +#281349 = CIRCLE('',#281350,0.137255); +#281350 = AXIS2_PLACEMENT_3D('',#281351,#281352,#281353); +#281351 = CARTESIAN_POINT('',(122.6,-86.3,-3.5E-02)); +#281352 = DIRECTION('',(0.,0.,1.)); +#281353 = DIRECTION('',(1.,0.,-0.)); +#281354 = ORIENTED_EDGE('',*,*,#281338,.F.); +#281355 = ORIENTED_EDGE('',*,*,#281356,.F.); +#281356 = EDGE_CURVE('',#281339,#281339,#281357,.T.); +#281357 = CIRCLE('',#281358,0.137255); +#281358 = AXIS2_PLACEMENT_3D('',#281359,#281360,#281361); +#281359 = CARTESIAN_POINT('',(122.6,-86.3,0.)); +#281360 = DIRECTION('',(0.,0.,1.)); +#281361 = DIRECTION('',(1.,0.,-0.)); +#281362 = CYLINDRICAL_SURFACE('',#281363,0.137255); +#281363 = AXIS2_PLACEMENT_3D('',#281364,#281365,#281366); +#281364 = CARTESIAN_POINT('',(122.6,-86.3,0.)); +#281365 = DIRECTION('',(0.,0.,1.)); +#281366 = DIRECTION('',(1.,0.,-0.)); +#281367 = ADVANCED_FACE('',(#281368,#281371),#281374,.F.); +#281368 = FACE_BOUND('',#281369,.T.); +#281369 = EDGE_LOOP('',(#281370)); +#281370 = ORIENTED_EDGE('',*,*,#281323,.T.); +#281371 = FACE_BOUND('',#281372,.F.); +#281372 = EDGE_LOOP('',(#281373)); +#281373 = ORIENTED_EDGE('',*,*,#281356,.T.); +#281374 = PLANE('',#281375); +#281375 = AXIS2_PLACEMENT_3D('',#281376,#281377,#281378); +#281376 = CARTESIAN_POINT('',(0.,0.,0.)); +#281377 = DIRECTION('',(-0.,-0.,-1.)); +#281378 = DIRECTION('',(-1.,0.,0.)); +#281379 = ADVANCED_FACE('',(#281380,#281383),#281386,.T.); +#281380 = FACE_BOUND('',#281381,.F.); +#281381 = EDGE_LOOP('',(#281382)); +#281382 = ORIENTED_EDGE('',*,*,#281315,.T.); +#281383 = FACE_BOUND('',#281384,.T.); +#281384 = EDGE_LOOP('',(#281385)); +#281385 = ORIENTED_EDGE('',*,*,#281348,.T.); +#281386 = PLANE('',#281387); +#281387 = AXIS2_PLACEMENT_3D('',#281388,#281389,#281390); +#281388 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281389 = DIRECTION('',(-0.,-0.,-1.)); +#281390 = DIRECTION('',(-1.,0.,0.)); +#281391 = MANIFOLD_SOLID_BREP('',#281392); +#281392 = CLOSED_SHELL('',(#281393,#281426,#281459,#281471)); +#281393 = ADVANCED_FACE('',(#281394),#281421,.T.); +#281394 = FACE_BOUND('',#281395,.T.); +#281395 = EDGE_LOOP('',(#281396,#281406,#281413,#281414)); +#281396 = ORIENTED_EDGE('',*,*,#281397,.T.); +#281397 = EDGE_CURVE('',#281398,#281400,#281402,.T.); +#281398 = VERTEX_POINT('',#281399); +#281399 = CARTESIAN_POINT('',(147.8,-83.,0.)); +#281400 = VERTEX_POINT('',#281401); +#281401 = CARTESIAN_POINT('',(147.8,-83.,-3.5E-02)); +#281402 = LINE('',#281403,#281404); +#281403 = CARTESIAN_POINT('',(147.8,-83.,0.)); +#281404 = VECTOR('',#281405,1.); +#281405 = DIRECTION('',(0.,0.,-1.)); +#281406 = ORIENTED_EDGE('',*,*,#281407,.T.); +#281407 = EDGE_CURVE('',#281400,#281400,#281408,.T.); +#281408 = CIRCLE('',#281409,0.3); +#281409 = AXIS2_PLACEMENT_3D('',#281410,#281411,#281412); +#281410 = CARTESIAN_POINT('',(147.5,-83.,-3.5E-02)); +#281411 = DIRECTION('',(0.,0.,1.)); +#281412 = DIRECTION('',(1.,0.,-0.)); +#281413 = ORIENTED_EDGE('',*,*,#281397,.F.); +#281414 = ORIENTED_EDGE('',*,*,#281415,.F.); +#281415 = EDGE_CURVE('',#281398,#281398,#281416,.T.); +#281416 = CIRCLE('',#281417,0.3); +#281417 = AXIS2_PLACEMENT_3D('',#281418,#281419,#281420); +#281418 = CARTESIAN_POINT('',(147.5,-83.,0.)); +#281419 = DIRECTION('',(0.,0.,1.)); +#281420 = DIRECTION('',(1.,0.,-0.)); +#281421 = CYLINDRICAL_SURFACE('',#281422,0.3); +#281422 = AXIS2_PLACEMENT_3D('',#281423,#281424,#281425); +#281423 = CARTESIAN_POINT('',(147.5,-83.,0.)); +#281424 = DIRECTION('',(0.,0.,1.)); +#281425 = DIRECTION('',(1.,0.,-0.)); +#281426 = ADVANCED_FACE('',(#281427),#281454,.F.); +#281427 = FACE_BOUND('',#281428,.F.); +#281428 = EDGE_LOOP('',(#281429,#281439,#281446,#281447)); +#281429 = ORIENTED_EDGE('',*,*,#281430,.T.); +#281430 = EDGE_CURVE('',#281431,#281433,#281435,.T.); +#281431 = VERTEX_POINT('',#281432); +#281432 = CARTESIAN_POINT('',(147.637255,-83.,0.)); +#281433 = VERTEX_POINT('',#281434); +#281434 = CARTESIAN_POINT('',(147.637255,-83.,-3.5E-02)); +#281435 = LINE('',#281436,#281437); +#281436 = CARTESIAN_POINT('',(147.637255,-83.,0.)); +#281437 = VECTOR('',#281438,1.); +#281438 = DIRECTION('',(0.,0.,-1.)); +#281439 = ORIENTED_EDGE('',*,*,#281440,.T.); +#281440 = EDGE_CURVE('',#281433,#281433,#281441,.T.); +#281441 = CIRCLE('',#281442,0.137255); +#281442 = AXIS2_PLACEMENT_3D('',#281443,#281444,#281445); +#281443 = CARTESIAN_POINT('',(147.5,-83.,-3.5E-02)); +#281444 = DIRECTION('',(0.,0.,1.)); +#281445 = DIRECTION('',(1.,0.,-0.)); +#281446 = ORIENTED_EDGE('',*,*,#281430,.F.); +#281447 = ORIENTED_EDGE('',*,*,#281448,.F.); +#281448 = EDGE_CURVE('',#281431,#281431,#281449,.T.); +#281449 = CIRCLE('',#281450,0.137255); +#281450 = AXIS2_PLACEMENT_3D('',#281451,#281452,#281453); +#281451 = CARTESIAN_POINT('',(147.5,-83.,0.)); +#281452 = DIRECTION('',(0.,0.,1.)); +#281453 = DIRECTION('',(1.,0.,-0.)); +#281454 = CYLINDRICAL_SURFACE('',#281455,0.137255); +#281455 = AXIS2_PLACEMENT_3D('',#281456,#281457,#281458); +#281456 = CARTESIAN_POINT('',(147.5,-83.,0.)); +#281457 = DIRECTION('',(0.,0.,1.)); +#281458 = DIRECTION('',(1.,0.,-0.)); +#281459 = ADVANCED_FACE('',(#281460,#281463),#281466,.F.); +#281460 = FACE_BOUND('',#281461,.T.); +#281461 = EDGE_LOOP('',(#281462)); +#281462 = ORIENTED_EDGE('',*,*,#281415,.T.); +#281463 = FACE_BOUND('',#281464,.F.); +#281464 = EDGE_LOOP('',(#281465)); +#281465 = ORIENTED_EDGE('',*,*,#281448,.T.); +#281466 = PLANE('',#281467); +#281467 = AXIS2_PLACEMENT_3D('',#281468,#281469,#281470); +#281468 = CARTESIAN_POINT('',(0.,0.,0.)); +#281469 = DIRECTION('',(-0.,-0.,-1.)); +#281470 = DIRECTION('',(-1.,0.,0.)); +#281471 = ADVANCED_FACE('',(#281472,#281475),#281478,.T.); +#281472 = FACE_BOUND('',#281473,.F.); +#281473 = EDGE_LOOP('',(#281474)); +#281474 = ORIENTED_EDGE('',*,*,#281407,.T.); +#281475 = FACE_BOUND('',#281476,.T.); +#281476 = EDGE_LOOP('',(#281477)); +#281477 = ORIENTED_EDGE('',*,*,#281440,.T.); +#281478 = PLANE('',#281479); +#281479 = AXIS2_PLACEMENT_3D('',#281480,#281481,#281482); +#281480 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281481 = DIRECTION('',(-0.,-0.,-1.)); +#281482 = DIRECTION('',(-1.,0.,0.)); +#281483 = MANIFOLD_SOLID_BREP('',#281484); +#281484 = CLOSED_SHELL('',(#281485,#281527,#281558,#281589,#281620, + #281653,#281684,#281715,#281748,#281779,#281810,#281841,#281863, + #281896,#281919)); +#281485 = ADVANCED_FACE('',(#281486),#281522,.T.); +#281486 = FACE_BOUND('',#281487,.F.); +#281487 = EDGE_LOOP('',(#281488,#281498,#281507,#281515)); +#281488 = ORIENTED_EDGE('',*,*,#281489,.T.); +#281489 = EDGE_CURVE('',#281490,#281492,#281494,.T.); +#281490 = VERTEX_POINT('',#281491); +#281491 = CARTESIAN_POINT('',(141.744443,-78.141853,0.)); +#281492 = VERTEX_POINT('',#281493); +#281493 = CARTESIAN_POINT('',(141.744443,-78.141853,-3.5E-02)); +#281494 = LINE('',#281495,#281496); +#281495 = CARTESIAN_POINT('',(141.744443,-78.141853,0.)); +#281496 = VECTOR('',#281497,1.); +#281497 = DIRECTION('',(0.,0.,-1.)); +#281498 = ORIENTED_EDGE('',*,*,#281499,.T.); +#281499 = EDGE_CURVE('',#281492,#281500,#281502,.T.); +#281500 = VERTEX_POINT('',#281501); +#281501 = CARTESIAN_POINT('',(141.898079,-78.205491,-3.5E-02)); +#281502 = CIRCLE('',#281503,0.100000590676); +#281503 = AXIS2_PLACEMENT_3D('',#281504,#281505,#281506); +#281504 = CARTESIAN_POINT('',(141.8,-78.22500068719,-3.5E-02)); +#281505 = DIRECTION('',(0.,0.,-1.)); +#281506 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#281507 = ORIENTED_EDGE('',*,*,#281508,.F.); +#281508 = EDGE_CURVE('',#281509,#281500,#281511,.T.); +#281509 = VERTEX_POINT('',#281510); +#281510 = CARTESIAN_POINT('',(141.898079,-78.205491,0.)); +#281511 = LINE('',#281512,#281513); +#281512 = CARTESIAN_POINT('',(141.898079,-78.205491,0.)); +#281513 = VECTOR('',#281514,1.); +#281514 = DIRECTION('',(0.,0.,-1.)); +#281515 = ORIENTED_EDGE('',*,*,#281516,.F.); +#281516 = EDGE_CURVE('',#281490,#281509,#281517,.T.); +#281517 = CIRCLE('',#281518,0.100000590676); +#281518 = AXIS2_PLACEMENT_3D('',#281519,#281520,#281521); +#281519 = CARTESIAN_POINT('',(141.8,-78.22500068719,0.)); +#281520 = DIRECTION('',(0.,0.,-1.)); +#281521 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#281522 = CYLINDRICAL_SURFACE('',#281523,0.100000590676); +#281523 = AXIS2_PLACEMENT_3D('',#281524,#281525,#281526); +#281524 = CARTESIAN_POINT('',(141.8,-78.22500068719,0.)); +#281525 = DIRECTION('',(-0.,-0.,1.)); +#281526 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#281527 = ADVANCED_FACE('',(#281528),#281553,.F.); +#281528 = FACE_BOUND('',#281529,.F.); +#281529 = EDGE_LOOP('',(#281530,#281531,#281539,#281547)); +#281530 = ORIENTED_EDGE('',*,*,#281508,.T.); +#281531 = ORIENTED_EDGE('',*,*,#281532,.T.); +#281532 = EDGE_CURVE('',#281500,#281533,#281535,.T.); +#281533 = VERTEX_POINT('',#281534); +#281534 = CARTESIAN_POINT('',(141.9,-79.3,-3.5E-02)); +#281535 = LINE('',#281536,#281537); +#281536 = CARTESIAN_POINT('',(141.898079,-78.205491,-3.5E-02)); +#281537 = VECTOR('',#281538,1.); +#281538 = DIRECTION('',(1.755122197471E-03,-0.999998459772,0.)); +#281539 = ORIENTED_EDGE('',*,*,#281540,.F.); +#281540 = EDGE_CURVE('',#281541,#281533,#281543,.T.); +#281541 = VERTEX_POINT('',#281542); +#281542 = CARTESIAN_POINT('',(141.9,-79.3,0.)); +#281543 = LINE('',#281544,#281545); +#281544 = CARTESIAN_POINT('',(141.9,-79.3,0.)); +#281545 = VECTOR('',#281546,1.); +#281546 = DIRECTION('',(0.,0.,-1.)); +#281547 = ORIENTED_EDGE('',*,*,#281548,.F.); +#281548 = EDGE_CURVE('',#281509,#281541,#281549,.T.); +#281549 = LINE('',#281550,#281551); +#281550 = CARTESIAN_POINT('',(141.898079,-78.205491,0.)); +#281551 = VECTOR('',#281552,1.); +#281552 = DIRECTION('',(1.755122197471E-03,-0.999998459772,0.)); +#281553 = PLANE('',#281554); +#281554 = AXIS2_PLACEMENT_3D('',#281555,#281556,#281557); +#281555 = CARTESIAN_POINT('',(141.898079,-78.205491,0.)); +#281556 = DIRECTION('',(-0.999998459772,-1.755122197471E-03,-0.)); +#281557 = DIRECTION('',(1.755122197471E-03,-0.999998459772,0.)); +#281558 = ADVANCED_FACE('',(#281559),#281584,.F.); +#281559 = FACE_BOUND('',#281560,.F.); +#281560 = EDGE_LOOP('',(#281561,#281562,#281570,#281578)); +#281561 = ORIENTED_EDGE('',*,*,#281540,.T.); +#281562 = ORIENTED_EDGE('',*,*,#281563,.T.); +#281563 = EDGE_CURVE('',#281533,#281564,#281566,.T.); +#281564 = VERTEX_POINT('',#281565); +#281565 = CARTESIAN_POINT('',(142.518869,-79.3,-3.5E-02)); +#281566 = LINE('',#281567,#281568); +#281567 = CARTESIAN_POINT('',(141.9,-79.3,-3.5E-02)); +#281568 = VECTOR('',#281569,1.); +#281569 = DIRECTION('',(1.,0.,0.)); +#281570 = ORIENTED_EDGE('',*,*,#281571,.F.); +#281571 = EDGE_CURVE('',#281572,#281564,#281574,.T.); +#281572 = VERTEX_POINT('',#281573); +#281573 = CARTESIAN_POINT('',(142.518869,-79.3,0.)); +#281574 = LINE('',#281575,#281576); +#281575 = CARTESIAN_POINT('',(142.518869,-79.3,0.)); +#281576 = VECTOR('',#281577,1.); +#281577 = DIRECTION('',(0.,0.,-1.)); +#281578 = ORIENTED_EDGE('',*,*,#281579,.F.); +#281579 = EDGE_CURVE('',#281541,#281572,#281580,.T.); +#281580 = LINE('',#281581,#281582); +#281581 = CARTESIAN_POINT('',(141.9,-79.3,0.)); +#281582 = VECTOR('',#281583,1.); +#281583 = DIRECTION('',(1.,0.,0.)); +#281584 = PLANE('',#281585); +#281585 = AXIS2_PLACEMENT_3D('',#281586,#281587,#281588); +#281586 = CARTESIAN_POINT('',(141.9,-79.3,0.)); +#281587 = DIRECTION('',(0.,-1.,0.)); +#281588 = DIRECTION('',(1.,0.,0.)); +#281589 = ADVANCED_FACE('',(#281590),#281615,.F.); +#281590 = FACE_BOUND('',#281591,.F.); +#281591 = EDGE_LOOP('',(#281592,#281593,#281601,#281609)); +#281592 = ORIENTED_EDGE('',*,*,#281571,.T.); +#281593 = ORIENTED_EDGE('',*,*,#281594,.T.); +#281594 = EDGE_CURVE('',#281564,#281595,#281597,.T.); +#281595 = VERTEX_POINT('',#281596); +#281596 = CARTESIAN_POINT('',(142.522836,-79.285195,-3.5E-02)); +#281597 = LINE('',#281598,#281599); +#281598 = CARTESIAN_POINT('',(142.518869,-79.3,-3.5E-02)); +#281599 = VECTOR('',#281600,1.); +#281600 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#281601 = ORIENTED_EDGE('',*,*,#281602,.F.); +#281602 = EDGE_CURVE('',#281603,#281595,#281605,.T.); +#281603 = VERTEX_POINT('',#281604); +#281604 = CARTESIAN_POINT('',(142.522836,-79.285195,0.)); +#281605 = LINE('',#281606,#281607); +#281606 = CARTESIAN_POINT('',(142.522836,-79.285195,0.)); +#281607 = VECTOR('',#281608,1.); +#281608 = DIRECTION('',(0.,0.,-1.)); +#281609 = ORIENTED_EDGE('',*,*,#281610,.F.); +#281610 = EDGE_CURVE('',#281572,#281603,#281611,.T.); +#281611 = LINE('',#281612,#281613); +#281612 = CARTESIAN_POINT('',(142.518869,-79.3,0.)); +#281613 = VECTOR('',#281614,1.); +#281614 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#281615 = PLANE('',#281616); +#281616 = AXIS2_PLACEMENT_3D('',#281617,#281618,#281619); +#281617 = CARTESIAN_POINT('',(142.518869,-79.3,0.)); +#281618 = DIRECTION('',(0.965925627198,-0.25881978812,0.)); +#281619 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#281620 = ADVANCED_FACE('',(#281621),#281648,.T.); +#281621 = FACE_BOUND('',#281622,.F.); +#281622 = EDGE_LOOP('',(#281623,#281624,#281633,#281641)); +#281623 = ORIENTED_EDGE('',*,*,#281602,.T.); +#281624 = ORIENTED_EDGE('',*,*,#281625,.T.); +#281625 = EDGE_CURVE('',#281595,#281626,#281628,.T.); +#281626 = VERTEX_POINT('',#281627); +#281627 = CARTESIAN_POINT('',(142.522836,-79.514805,-3.5E-02)); +#281628 = CIRCLE('',#281629,0.299999850918); +#281629 = AXIS2_PLACEMENT_3D('',#281630,#281631,#281632); +#281630 = CARTESIAN_POINT('',(142.79999971069,-79.4,-3.5E-02)); +#281631 = DIRECTION('',(0.,0.,-1.)); +#281632 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#281633 = ORIENTED_EDGE('',*,*,#281634,.F.); +#281634 = EDGE_CURVE('',#281635,#281626,#281637,.T.); +#281635 = VERTEX_POINT('',#281636); +#281636 = CARTESIAN_POINT('',(142.522836,-79.514805,0.)); +#281637 = LINE('',#281638,#281639); +#281638 = CARTESIAN_POINT('',(142.522836,-79.514805,0.)); +#281639 = VECTOR('',#281640,1.); +#281640 = DIRECTION('',(0.,0.,-1.)); +#281641 = ORIENTED_EDGE('',*,*,#281642,.F.); +#281642 = EDGE_CURVE('',#281603,#281635,#281643,.T.); +#281643 = CIRCLE('',#281644,0.299999850918); +#281644 = AXIS2_PLACEMENT_3D('',#281645,#281646,#281647); +#281645 = CARTESIAN_POINT('',(142.79999971069,-79.4,0.)); +#281646 = DIRECTION('',(0.,0.,-1.)); +#281647 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#281648 = CYLINDRICAL_SURFACE('',#281649,0.299999850918); +#281649 = AXIS2_PLACEMENT_3D('',#281650,#281651,#281652); +#281650 = CARTESIAN_POINT('',(142.79999971069,-79.4,0.)); +#281651 = DIRECTION('',(-0.,-0.,1.)); +#281652 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#281653 = ADVANCED_FACE('',(#281654),#281679,.F.); +#281654 = FACE_BOUND('',#281655,.F.); +#281655 = EDGE_LOOP('',(#281656,#281657,#281665,#281673)); +#281656 = ORIENTED_EDGE('',*,*,#281634,.T.); +#281657 = ORIENTED_EDGE('',*,*,#281658,.T.); +#281658 = EDGE_CURVE('',#281626,#281659,#281661,.T.); +#281659 = VERTEX_POINT('',#281660); +#281660 = CARTESIAN_POINT('',(142.518869,-79.5,-3.5E-02)); +#281661 = LINE('',#281662,#281663); +#281662 = CARTESIAN_POINT('',(142.522836,-79.514805,-3.5E-02)); +#281663 = VECTOR('',#281664,1.); +#281664 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#281665 = ORIENTED_EDGE('',*,*,#281666,.F.); +#281666 = EDGE_CURVE('',#281667,#281659,#281669,.T.); +#281667 = VERTEX_POINT('',#281668); +#281668 = CARTESIAN_POINT('',(142.518869,-79.5,0.)); +#281669 = LINE('',#281670,#281671); +#281670 = CARTESIAN_POINT('',(142.518869,-79.5,0.)); +#281671 = VECTOR('',#281672,1.); +#281672 = DIRECTION('',(0.,0.,-1.)); +#281673 = ORIENTED_EDGE('',*,*,#281674,.F.); +#281674 = EDGE_CURVE('',#281635,#281667,#281675,.T.); +#281675 = LINE('',#281676,#281677); +#281676 = CARTESIAN_POINT('',(142.522836,-79.514805,0.)); +#281677 = VECTOR('',#281678,1.); +#281678 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#281679 = PLANE('',#281680); +#281680 = AXIS2_PLACEMENT_3D('',#281681,#281682,#281683); +#281681 = CARTESIAN_POINT('',(142.522836,-79.514805,0.)); +#281682 = DIRECTION('',(0.965925627198,0.25881978812,0.)); +#281683 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#281684 = ADVANCED_FACE('',(#281685),#281710,.F.); +#281685 = FACE_BOUND('',#281686,.F.); +#281686 = EDGE_LOOP('',(#281687,#281688,#281696,#281704)); +#281687 = ORIENTED_EDGE('',*,*,#281666,.T.); +#281688 = ORIENTED_EDGE('',*,*,#281689,.T.); +#281689 = EDGE_CURVE('',#281659,#281690,#281692,.T.); +#281690 = VERTEX_POINT('',#281691); +#281691 = CARTESIAN_POINT('',(141.740491,-79.498079,-3.5E-02)); +#281692 = LINE('',#281693,#281694); +#281693 = CARTESIAN_POINT('',(142.518869,-79.5,-3.5E-02)); +#281694 = VECTOR('',#281695,1.); +#281695 = DIRECTION('',(-0.999996954619,2.467945072727E-03,0.)); +#281696 = ORIENTED_EDGE('',*,*,#281697,.F.); +#281697 = EDGE_CURVE('',#281698,#281690,#281700,.T.); +#281698 = VERTEX_POINT('',#281699); +#281699 = CARTESIAN_POINT('',(141.740491,-79.498079,0.)); +#281700 = LINE('',#281701,#281702); +#281701 = CARTESIAN_POINT('',(141.740491,-79.498079,0.)); +#281702 = VECTOR('',#281703,1.); +#281703 = DIRECTION('',(0.,0.,-1.)); +#281704 = ORIENTED_EDGE('',*,*,#281705,.F.); +#281705 = EDGE_CURVE('',#281667,#281698,#281706,.T.); +#281706 = LINE('',#281707,#281708); +#281707 = CARTESIAN_POINT('',(142.518869,-79.5,0.)); +#281708 = VECTOR('',#281709,1.); +#281709 = DIRECTION('',(-0.999996954619,2.467945072727E-03,0.)); +#281710 = PLANE('',#281711); +#281711 = AXIS2_PLACEMENT_3D('',#281712,#281713,#281714); +#281712 = CARTESIAN_POINT('',(142.518869,-79.5,0.)); +#281713 = DIRECTION('',(2.467945072727E-03,0.999996954619,0.)); +#281714 = DIRECTION('',(-0.999996954619,2.467945072727E-03,0.)); +#281715 = ADVANCED_FACE('',(#281716),#281743,.T.); +#281716 = FACE_BOUND('',#281717,.F.); +#281717 = EDGE_LOOP('',(#281718,#281719,#281728,#281736)); +#281718 = ORIENTED_EDGE('',*,*,#281697,.T.); +#281719 = ORIENTED_EDGE('',*,*,#281720,.T.); +#281720 = EDGE_CURVE('',#281690,#281721,#281723,.T.); +#281721 = VERTEX_POINT('',#281722); +#281722 = CARTESIAN_POINT('',(141.676853,-79.344443,-3.5E-02)); +#281723 = CIRCLE('',#281724,0.100000590676); +#281724 = AXIS2_PLACEMENT_3D('',#281725,#281726,#281727); +#281725 = CARTESIAN_POINT('',(141.76000068719,-79.4,-3.5E-02)); +#281726 = DIRECTION('',(0.,0.,-1.)); +#281727 = DIRECTION('',(-0.19509571961,-0.98078420674,-0.)); +#281728 = ORIENTED_EDGE('',*,*,#281729,.F.); +#281729 = EDGE_CURVE('',#281730,#281721,#281732,.T.); +#281730 = VERTEX_POINT('',#281731); +#281731 = CARTESIAN_POINT('',(141.676853,-79.344443,0.)); +#281732 = LINE('',#281733,#281734); +#281733 = CARTESIAN_POINT('',(141.676853,-79.344443,0.)); +#281734 = VECTOR('',#281735,1.); +#281735 = DIRECTION('',(0.,0.,-1.)); +#281736 = ORIENTED_EDGE('',*,*,#281737,.F.); +#281737 = EDGE_CURVE('',#281698,#281730,#281738,.T.); +#281738 = CIRCLE('',#281739,0.100000590676); +#281739 = AXIS2_PLACEMENT_3D('',#281740,#281741,#281742); +#281740 = CARTESIAN_POINT('',(141.76000068719,-79.4,0.)); +#281741 = DIRECTION('',(0.,0.,-1.)); +#281742 = DIRECTION('',(-0.19509571961,-0.98078420674,-0.)); +#281743 = CYLINDRICAL_SURFACE('',#281744,0.100000590676); +#281744 = AXIS2_PLACEMENT_3D('',#281745,#281746,#281747); +#281745 = CARTESIAN_POINT('',(141.76000068719,-79.4,0.)); +#281746 = DIRECTION('',(-0.,-0.,1.)); +#281747 = DIRECTION('',(-0.19509571961,-0.98078420674,-0.)); +#281748 = ADVANCED_FACE('',(#281749),#281774,.F.); +#281749 = FACE_BOUND('',#281750,.F.); +#281750 = EDGE_LOOP('',(#281751,#281752,#281760,#281768)); +#281751 = ORIENTED_EDGE('',*,*,#281729,.T.); +#281752 = ORIENTED_EDGE('',*,*,#281753,.T.); +#281753 = EDGE_CURVE('',#281721,#281754,#281756,.T.); +#281754 = VERTEX_POINT('',#281755); +#281755 = CARTESIAN_POINT('',(141.7,-79.318578,-3.5E-02)); +#281756 = LINE('',#281757,#281758); +#281757 = CARTESIAN_POINT('',(141.676853,-79.344443,-3.5E-02)); +#281758 = VECTOR('',#281759,1.); +#281759 = DIRECTION('',(0.66686896479,0.74517500213,0.)); +#281760 = ORIENTED_EDGE('',*,*,#281761,.F.); +#281761 = EDGE_CURVE('',#281762,#281754,#281764,.T.); +#281762 = VERTEX_POINT('',#281763); +#281763 = CARTESIAN_POINT('',(141.7,-79.318578,0.)); +#281764 = LINE('',#281765,#281766); +#281765 = CARTESIAN_POINT('',(141.7,-79.318578,0.)); +#281766 = VECTOR('',#281767,1.); +#281767 = DIRECTION('',(0.,0.,-1.)); +#281768 = ORIENTED_EDGE('',*,*,#281769,.F.); +#281769 = EDGE_CURVE('',#281730,#281762,#281770,.T.); +#281770 = LINE('',#281771,#281772); +#281771 = CARTESIAN_POINT('',(141.676853,-79.344443,0.)); +#281772 = VECTOR('',#281773,1.); +#281773 = DIRECTION('',(0.66686896479,0.74517500213,0.)); +#281774 = PLANE('',#281775); +#281775 = AXIS2_PLACEMENT_3D('',#281776,#281777,#281778); +#281776 = CARTESIAN_POINT('',(141.676853,-79.344443,0.)); +#281777 = DIRECTION('',(0.74517500213,-0.66686896479,0.)); +#281778 = DIRECTION('',(0.66686896479,0.74517500213,0.)); +#281779 = ADVANCED_FACE('',(#281780),#281805,.F.); +#281780 = FACE_BOUND('',#281781,.F.); +#281781 = EDGE_LOOP('',(#281782,#281783,#281791,#281799)); +#281782 = ORIENTED_EDGE('',*,*,#281761,.T.); +#281783 = ORIENTED_EDGE('',*,*,#281784,.T.); +#281784 = EDGE_CURVE('',#281754,#281785,#281787,.T.); +#281785 = VERTEX_POINT('',#281786); +#281786 = CARTESIAN_POINT('',(141.701921,-78.205491,-3.5E-02)); +#281787 = LINE('',#281788,#281789); +#281788 = CARTESIAN_POINT('',(141.7,-79.318578,-3.5E-02)); +#281789 = VECTOR('',#281790,1.); +#281790 = DIRECTION('',(1.725828384641E-03,0.999998510757,0.)); +#281791 = ORIENTED_EDGE('',*,*,#281792,.F.); +#281792 = EDGE_CURVE('',#281793,#281785,#281795,.T.); +#281793 = VERTEX_POINT('',#281794); +#281794 = CARTESIAN_POINT('',(141.701921,-78.205491,0.)); +#281795 = LINE('',#281796,#281797); +#281796 = CARTESIAN_POINT('',(141.701921,-78.205491,0.)); +#281797 = VECTOR('',#281798,1.); +#281798 = DIRECTION('',(0.,0.,-1.)); +#281799 = ORIENTED_EDGE('',*,*,#281800,.F.); +#281800 = EDGE_CURVE('',#281762,#281793,#281801,.T.); +#281801 = LINE('',#281802,#281803); +#281802 = CARTESIAN_POINT('',(141.7,-79.318578,0.)); +#281803 = VECTOR('',#281804,1.); +#281804 = DIRECTION('',(1.725828384641E-03,0.999998510757,0.)); +#281805 = PLANE('',#281806); +#281806 = AXIS2_PLACEMENT_3D('',#281807,#281808,#281809); +#281807 = CARTESIAN_POINT('',(141.7,-79.318578,0.)); +#281808 = DIRECTION('',(0.999998510757,-1.725828384641E-03,0.)); +#281809 = DIRECTION('',(1.725828384641E-03,0.999998510757,0.)); +#281810 = ADVANCED_FACE('',(#281811),#281836,.F.); +#281811 = FACE_BOUND('',#281812,.F.); +#281812 = EDGE_LOOP('',(#281813,#281814,#281822,#281830)); +#281813 = ORIENTED_EDGE('',*,*,#281792,.T.); +#281814 = ORIENTED_EDGE('',*,*,#281815,.T.); +#281815 = EDGE_CURVE('',#281785,#281816,#281818,.T.); +#281816 = VERTEX_POINT('',#281817); +#281817 = CARTESIAN_POINT('',(141.716853,-78.169443,-3.5E-02)); +#281818 = LINE('',#281819,#281820); +#281819 = CARTESIAN_POINT('',(141.701921,-78.205491,-3.5E-02)); +#281820 = VECTOR('',#281821,1.); +#281821 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#281822 = ORIENTED_EDGE('',*,*,#281823,.F.); +#281823 = EDGE_CURVE('',#281824,#281816,#281826,.T.); +#281824 = VERTEX_POINT('',#281825); +#281825 = CARTESIAN_POINT('',(141.716853,-78.169443,0.)); +#281826 = LINE('',#281827,#281828); +#281827 = CARTESIAN_POINT('',(141.716853,-78.169443,0.)); +#281828 = VECTOR('',#281829,1.); +#281829 = DIRECTION('',(0.,0.,-1.)); +#281830 = ORIENTED_EDGE('',*,*,#281831,.F.); +#281831 = EDGE_CURVE('',#281793,#281824,#281832,.T.); +#281832 = LINE('',#281833,#281834); +#281833 = CARTESIAN_POINT('',(141.701921,-78.205491,0.)); +#281834 = VECTOR('',#281835,1.); +#281835 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#281836 = PLANE('',#281837); +#281837 = AXIS2_PLACEMENT_3D('',#281838,#281839,#281840); +#281838 = CARTESIAN_POINT('',(141.701921,-78.205491,0.)); +#281839 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#281840 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#281841 = ADVANCED_FACE('',(#281842),#281858,.F.); +#281842 = FACE_BOUND('',#281843,.F.); +#281843 = EDGE_LOOP('',(#281844,#281845,#281851,#281852)); +#281844 = ORIENTED_EDGE('',*,*,#281823,.T.); +#281845 = ORIENTED_EDGE('',*,*,#281846,.T.); +#281846 = EDGE_CURVE('',#281816,#281492,#281847,.T.); +#281847 = LINE('',#281848,#281849); +#281848 = CARTESIAN_POINT('',(141.716853,-78.169443,-3.5E-02)); +#281849 = VECTOR('',#281850,1.); +#281850 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#281851 = ORIENTED_EDGE('',*,*,#281489,.F.); +#281852 = ORIENTED_EDGE('',*,*,#281853,.F.); +#281853 = EDGE_CURVE('',#281824,#281490,#281854,.T.); +#281854 = LINE('',#281855,#281856); +#281855 = CARTESIAN_POINT('',(141.716853,-78.169443,0.)); +#281856 = VECTOR('',#281857,1.); +#281857 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#281858 = PLANE('',#281859); +#281859 = AXIS2_PLACEMENT_3D('',#281860,#281861,#281862); +#281860 = CARTESIAN_POINT('',(141.716853,-78.169443,0.)); +#281861 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#281862 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#281863 = ADVANCED_FACE('',(#281864),#281891,.F.); +#281864 = FACE_BOUND('',#281865,.F.); +#281865 = EDGE_LOOP('',(#281866,#281876,#281883,#281884)); +#281866 = ORIENTED_EDGE('',*,*,#281867,.T.); +#281867 = EDGE_CURVE('',#281868,#281870,#281872,.T.); +#281868 = VERTEX_POINT('',#281869); +#281869 = CARTESIAN_POINT('',(142.937255,-79.4,0.)); +#281870 = VERTEX_POINT('',#281871); +#281871 = CARTESIAN_POINT('',(142.937255,-79.4,-3.5E-02)); +#281872 = LINE('',#281873,#281874); +#281873 = CARTESIAN_POINT('',(142.937255,-79.4,0.)); +#281874 = VECTOR('',#281875,1.); +#281875 = DIRECTION('',(0.,0.,-1.)); +#281876 = ORIENTED_EDGE('',*,*,#281877,.T.); +#281877 = EDGE_CURVE('',#281870,#281870,#281878,.T.); +#281878 = CIRCLE('',#281879,0.137255); +#281879 = AXIS2_PLACEMENT_3D('',#281880,#281881,#281882); +#281880 = CARTESIAN_POINT('',(142.8,-79.4,-3.5E-02)); +#281881 = DIRECTION('',(0.,0.,1.)); +#281882 = DIRECTION('',(1.,0.,-0.)); +#281883 = ORIENTED_EDGE('',*,*,#281867,.F.); +#281884 = ORIENTED_EDGE('',*,*,#281885,.F.); +#281885 = EDGE_CURVE('',#281868,#281868,#281886,.T.); +#281886 = CIRCLE('',#281887,0.137255); +#281887 = AXIS2_PLACEMENT_3D('',#281888,#281889,#281890); +#281888 = CARTESIAN_POINT('',(142.8,-79.4,0.)); +#281889 = DIRECTION('',(0.,0.,1.)); +#281890 = DIRECTION('',(1.,0.,-0.)); +#281891 = CYLINDRICAL_SURFACE('',#281892,0.137255); +#281892 = AXIS2_PLACEMENT_3D('',#281893,#281894,#281895); +#281893 = CARTESIAN_POINT('',(142.8,-79.4,0.)); +#281894 = DIRECTION('',(0.,0.,1.)); +#281895 = DIRECTION('',(1.,0.,-0.)); +#281896 = ADVANCED_FACE('',(#281897,#281911),#281914,.F.); +#281897 = FACE_BOUND('',#281898,.F.); +#281898 = EDGE_LOOP('',(#281899,#281900,#281901,#281902,#281903,#281904, + #281905,#281906,#281907,#281908,#281909,#281910)); +#281899 = ORIENTED_EDGE('',*,*,#281516,.T.); +#281900 = ORIENTED_EDGE('',*,*,#281548,.T.); +#281901 = ORIENTED_EDGE('',*,*,#281579,.T.); +#281902 = ORIENTED_EDGE('',*,*,#281610,.T.); +#281903 = ORIENTED_EDGE('',*,*,#281642,.T.); +#281904 = ORIENTED_EDGE('',*,*,#281674,.T.); +#281905 = ORIENTED_EDGE('',*,*,#281705,.T.); +#281906 = ORIENTED_EDGE('',*,*,#281737,.T.); +#281907 = ORIENTED_EDGE('',*,*,#281769,.T.); +#281908 = ORIENTED_EDGE('',*,*,#281800,.T.); +#281909 = ORIENTED_EDGE('',*,*,#281831,.T.); +#281910 = ORIENTED_EDGE('',*,*,#281853,.T.); +#281911 = FACE_BOUND('',#281912,.F.); +#281912 = EDGE_LOOP('',(#281913)); +#281913 = ORIENTED_EDGE('',*,*,#281885,.T.); +#281914 = PLANE('',#281915); +#281915 = AXIS2_PLACEMENT_3D('',#281916,#281917,#281918); +#281916 = CARTESIAN_POINT('',(0.,0.,0.)); +#281917 = DIRECTION('',(-0.,-0.,-1.)); +#281918 = DIRECTION('',(-1.,0.,0.)); +#281919 = ADVANCED_FACE('',(#281920,#281934),#281937,.T.); +#281920 = FACE_BOUND('',#281921,.T.); +#281921 = EDGE_LOOP('',(#281922,#281923,#281924,#281925,#281926,#281927, + #281928,#281929,#281930,#281931,#281932,#281933)); +#281922 = ORIENTED_EDGE('',*,*,#281499,.T.); +#281923 = ORIENTED_EDGE('',*,*,#281532,.T.); +#281924 = ORIENTED_EDGE('',*,*,#281563,.T.); +#281925 = ORIENTED_EDGE('',*,*,#281594,.T.); +#281926 = ORIENTED_EDGE('',*,*,#281625,.T.); +#281927 = ORIENTED_EDGE('',*,*,#281658,.T.); +#281928 = ORIENTED_EDGE('',*,*,#281689,.T.); +#281929 = ORIENTED_EDGE('',*,*,#281720,.T.); +#281930 = ORIENTED_EDGE('',*,*,#281753,.T.); +#281931 = ORIENTED_EDGE('',*,*,#281784,.T.); +#281932 = ORIENTED_EDGE('',*,*,#281815,.T.); +#281933 = ORIENTED_EDGE('',*,*,#281846,.T.); +#281934 = FACE_BOUND('',#281935,.T.); +#281935 = EDGE_LOOP('',(#281936)); +#281936 = ORIENTED_EDGE('',*,*,#281877,.T.); +#281937 = PLANE('',#281938); +#281938 = AXIS2_PLACEMENT_3D('',#281939,#281940,#281941); +#281939 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#281940 = DIRECTION('',(-0.,-0.,-1.)); +#281941 = DIRECTION('',(-1.,0.,0.)); +#281942 = MANIFOLD_SOLID_BREP('',#281943); +#281943 = CLOSED_SHELL('',(#281944,#281986,#282017,#282048,#282081, + #282112,#282143,#282174,#282205,#282236,#282267,#282298,#282329, + #282362,#282393,#282424,#282457,#282488,#282510,#282543,#282572)); +#281944 = ADVANCED_FACE('',(#281945),#281981,.T.); +#281945 = FACE_BOUND('',#281946,.F.); +#281946 = EDGE_LOOP('',(#281947,#281957,#281966,#281974)); +#281947 = ORIENTED_EDGE('',*,*,#281948,.T.); +#281948 = EDGE_CURVE('',#281949,#281951,#281953,.T.); +#281949 = VERTEX_POINT('',#281950); +#281950 = CARTESIAN_POINT('',(138.744443,-77.571853,0.)); +#281951 = VERTEX_POINT('',#281952); +#281952 = CARTESIAN_POINT('',(138.744443,-77.571853,-3.5E-02)); +#281953 = LINE('',#281954,#281955); +#281954 = CARTESIAN_POINT('',(138.744443,-77.571853,0.)); +#281955 = VECTOR('',#281956,1.); +#281956 = DIRECTION('',(0.,0.,-1.)); +#281957 = ORIENTED_EDGE('',*,*,#281958,.T.); +#281958 = EDGE_CURVE('',#281951,#281959,#281961,.T.); +#281959 = VERTEX_POINT('',#281960); +#281960 = CARTESIAN_POINT('',(138.855557,-77.571853,-3.5E-02)); +#281961 = CIRCLE('',#281962,9.999758414126E-02); +#281962 = AXIS2_PLACEMENT_3D('',#281963,#281964,#281965); +#281963 = CARTESIAN_POINT('',(138.8,-77.65499707125,-3.5E-02)); +#281964 = DIRECTION('',(0.,0.,-1.)); +#281965 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#281966 = ORIENTED_EDGE('',*,*,#281967,.F.); +#281967 = EDGE_CURVE('',#281968,#281959,#281970,.T.); +#281968 = VERTEX_POINT('',#281969); +#281969 = CARTESIAN_POINT('',(138.855557,-77.571853,0.)); +#281970 = LINE('',#281971,#281972); +#281971 = CARTESIAN_POINT('',(138.855557,-77.571853,0.)); +#281972 = VECTOR('',#281973,1.); +#281973 = DIRECTION('',(0.,0.,-1.)); +#281974 = ORIENTED_EDGE('',*,*,#281975,.F.); +#281975 = EDGE_CURVE('',#281949,#281968,#281976,.T.); +#281976 = CIRCLE('',#281977,9.999758414126E-02); +#281977 = AXIS2_PLACEMENT_3D('',#281978,#281979,#281980); +#281978 = CARTESIAN_POINT('',(138.8,-77.65499707125,0.)); +#281979 = DIRECTION('',(0.,0.,-1.)); +#281980 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#281981 = CYLINDRICAL_SURFACE('',#281982,9.999758414126E-02); +#281982 = AXIS2_PLACEMENT_3D('',#281983,#281984,#281985); +#281983 = CARTESIAN_POINT('',(138.8,-77.65499707125,0.)); +#281984 = DIRECTION('',(-0.,-0.,1.)); +#281985 = DIRECTION('',(-0.555583422111,0.831460799482,0.)); +#281986 = ADVANCED_FACE('',(#281987),#282012,.F.); +#281987 = FACE_BOUND('',#281988,.F.); +#281988 = EDGE_LOOP('',(#281989,#281990,#281998,#282006)); +#281989 = ORIENTED_EDGE('',*,*,#281967,.T.); +#281990 = ORIENTED_EDGE('',*,*,#281991,.T.); +#281991 = EDGE_CURVE('',#281959,#281992,#281994,.T.); +#281992 = VERTEX_POINT('',#281993); +#281993 = CARTESIAN_POINT('',(139.248922,-77.9625,-3.5E-02)); +#281994 = LINE('',#281995,#281996); +#281995 = CARTESIAN_POINT('',(138.855557,-77.571853,-3.5E-02)); +#281996 = VECTOR('',#281997,1.); +#281997 = DIRECTION('',(0.709553903524,-0.7046511605,0.)); +#281998 = ORIENTED_EDGE('',*,*,#281999,.F.); +#281999 = EDGE_CURVE('',#282000,#281992,#282002,.T.); +#282000 = VERTEX_POINT('',#282001); +#282001 = CARTESIAN_POINT('',(139.248922,-77.9625,0.)); +#282002 = LINE('',#282003,#282004); +#282003 = CARTESIAN_POINT('',(139.248922,-77.9625,0.)); +#282004 = VECTOR('',#282005,1.); +#282005 = DIRECTION('',(0.,0.,-1.)); +#282006 = ORIENTED_EDGE('',*,*,#282007,.F.); +#282007 = EDGE_CURVE('',#281968,#282000,#282008,.T.); +#282008 = LINE('',#282009,#282010); +#282009 = CARTESIAN_POINT('',(138.855557,-77.571853,0.)); +#282010 = VECTOR('',#282011,1.); +#282011 = DIRECTION('',(0.709553903524,-0.7046511605,0.)); +#282012 = PLANE('',#282013); +#282013 = AXIS2_PLACEMENT_3D('',#282014,#282015,#282016); +#282014 = CARTESIAN_POINT('',(138.855557,-77.571853,0.)); +#282015 = DIRECTION('',(-0.7046511605,-0.709553903524,-0.)); +#282016 = DIRECTION('',(0.709553903524,-0.7046511605,0.)); +#282017 = ADVANCED_FACE('',(#282018),#282043,.F.); +#282018 = FACE_BOUND('',#282019,.F.); +#282019 = EDGE_LOOP('',(#282020,#282021,#282029,#282037)); +#282020 = ORIENTED_EDGE('',*,*,#281999,.T.); +#282021 = ORIENTED_EDGE('',*,*,#282022,.T.); +#282022 = EDGE_CURVE('',#281992,#282023,#282025,.T.); +#282023 = VERTEX_POINT('',#282024); +#282024 = CARTESIAN_POINT('',(140.157009,-77.964421,-3.5E-02)); +#282025 = LINE('',#282026,#282027); +#282026 = CARTESIAN_POINT('',(139.248922,-77.9625,-3.5E-02)); +#282027 = VECTOR('',#282028,1.); +#282028 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#282029 = ORIENTED_EDGE('',*,*,#282030,.F.); +#282030 = EDGE_CURVE('',#282031,#282023,#282033,.T.); +#282031 = VERTEX_POINT('',#282032); +#282032 = CARTESIAN_POINT('',(140.157009,-77.964421,0.)); +#282033 = LINE('',#282034,#282035); +#282034 = CARTESIAN_POINT('',(140.157009,-77.964421,0.)); +#282035 = VECTOR('',#282036,1.); +#282036 = DIRECTION('',(0.,0.,-1.)); +#282037 = ORIENTED_EDGE('',*,*,#282038,.F.); +#282038 = EDGE_CURVE('',#282000,#282031,#282039,.T.); +#282039 = LINE('',#282040,#282041); +#282040 = CARTESIAN_POINT('',(139.248922,-77.9625,0.)); +#282041 = VECTOR('',#282042,1.); +#282042 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#282043 = PLANE('',#282044); +#282044 = AXIS2_PLACEMENT_3D('',#282045,#282046,#282047); +#282045 = CARTESIAN_POINT('',(139.248922,-77.9625,0.)); +#282046 = DIRECTION('',(-2.115431342708E-03,-0.999997762473,-0.)); +#282047 = DIRECTION('',(0.999997762473,-2.115431342708E-03,0.)); +#282048 = ADVANCED_FACE('',(#282049),#282076,.T.); +#282049 = FACE_BOUND('',#282050,.F.); +#282050 = EDGE_LOOP('',(#282051,#282052,#282061,#282069)); +#282051 = ORIENTED_EDGE('',*,*,#282030,.T.); +#282052 = ORIENTED_EDGE('',*,*,#282053,.T.); +#282053 = EDGE_CURVE('',#282023,#282054,#282056,.T.); +#282054 = VERTEX_POINT('',#282055); +#282055 = CARTESIAN_POINT('',(140.157009,-78.160579,-3.5E-02)); +#282056 = CIRCLE('',#282057,0.100000456609); +#282057 = AXIS2_PLACEMENT_3D('',#282058,#282059,#282060); +#282058 = CARTESIAN_POINT('',(140.1375,-78.0625,-3.5E-02)); +#282059 = DIRECTION('',(0.,0.,-1.)); +#282060 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#282061 = ORIENTED_EDGE('',*,*,#282062,.F.); +#282062 = EDGE_CURVE('',#282063,#282054,#282065,.T.); +#282063 = VERTEX_POINT('',#282064); +#282064 = CARTESIAN_POINT('',(140.157009,-78.160579,0.)); +#282065 = LINE('',#282066,#282067); +#282066 = CARTESIAN_POINT('',(140.157009,-78.160579,0.)); +#282067 = VECTOR('',#282068,1.); +#282068 = DIRECTION('',(0.,0.,-1.)); +#282069 = ORIENTED_EDGE('',*,*,#282070,.F.); +#282070 = EDGE_CURVE('',#282031,#282063,#282071,.T.); +#282071 = CIRCLE('',#282072,0.100000456609); +#282072 = AXIS2_PLACEMENT_3D('',#282073,#282074,#282075); +#282073 = CARTESIAN_POINT('',(140.1375,-78.0625,0.)); +#282074 = DIRECTION('',(0.,0.,-1.)); +#282075 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#282076 = CYLINDRICAL_SURFACE('',#282077,0.100000456609); +#282077 = AXIS2_PLACEMENT_3D('',#282078,#282079,#282080); +#282078 = CARTESIAN_POINT('',(140.1375,-78.0625,0.)); +#282079 = DIRECTION('',(-0.,-0.,1.)); +#282080 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#282081 = ADVANCED_FACE('',(#282082),#282107,.F.); +#282082 = FACE_BOUND('',#282083,.F.); +#282083 = EDGE_LOOP('',(#282084,#282085,#282093,#282101)); +#282084 = ORIENTED_EDGE('',*,*,#282062,.T.); +#282085 = ORIENTED_EDGE('',*,*,#282086,.T.); +#282086 = EDGE_CURVE('',#282054,#282087,#282089,.T.); +#282087 = VERTEX_POINT('',#282088); +#282088 = CARTESIAN_POINT('',(139.187991,-78.160579,-3.5E-02)); +#282089 = LINE('',#282090,#282091); +#282090 = CARTESIAN_POINT('',(140.157009,-78.160579,-3.5E-02)); +#282091 = VECTOR('',#282092,1.); +#282092 = DIRECTION('',(-1.,0.,0.)); +#282093 = ORIENTED_EDGE('',*,*,#282094,.F.); +#282094 = EDGE_CURVE('',#282095,#282087,#282097,.T.); +#282095 = VERTEX_POINT('',#282096); +#282096 = CARTESIAN_POINT('',(139.187991,-78.160579,0.)); +#282097 = LINE('',#282098,#282099); +#282098 = CARTESIAN_POINT('',(139.187991,-78.160579,0.)); +#282099 = VECTOR('',#282100,1.); +#282100 = DIRECTION('',(0.,0.,-1.)); +#282101 = ORIENTED_EDGE('',*,*,#282102,.F.); +#282102 = EDGE_CURVE('',#282063,#282095,#282103,.T.); +#282103 = LINE('',#282104,#282105); +#282104 = CARTESIAN_POINT('',(140.157009,-78.160579,0.)); +#282105 = VECTOR('',#282106,1.); +#282106 = DIRECTION('',(-1.,0.,0.)); +#282107 = PLANE('',#282108); +#282108 = AXIS2_PLACEMENT_3D('',#282109,#282110,#282111); +#282109 = CARTESIAN_POINT('',(140.157009,-78.160579,0.)); +#282110 = DIRECTION('',(0.,1.,0.)); +#282111 = DIRECTION('',(-1.,0.,0.)); +#282112 = ADVANCED_FACE('',(#282113),#282138,.F.); +#282113 = FACE_BOUND('',#282114,.F.); +#282114 = EDGE_LOOP('',(#282115,#282116,#282124,#282132)); +#282115 = ORIENTED_EDGE('',*,*,#282094,.T.); +#282116 = ORIENTED_EDGE('',*,*,#282117,.T.); +#282117 = EDGE_CURVE('',#282087,#282118,#282120,.T.); +#282118 = VERTEX_POINT('',#282119); +#282119 = CARTESIAN_POINT('',(139.151943,-78.145647,-3.5E-02)); +#282120 = LINE('',#282121,#282122); +#282121 = CARTESIAN_POINT('',(139.187991,-78.160579,-3.5E-02)); +#282122 = VECTOR('',#282123,1.); +#282123 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#282124 = ORIENTED_EDGE('',*,*,#282125,.F.); +#282125 = EDGE_CURVE('',#282126,#282118,#282128,.T.); +#282126 = VERTEX_POINT('',#282127); +#282127 = CARTESIAN_POINT('',(139.151943,-78.145647,0.)); +#282128 = LINE('',#282129,#282130); +#282129 = CARTESIAN_POINT('',(139.151943,-78.145647,0.)); +#282130 = VECTOR('',#282131,1.); +#282131 = DIRECTION('',(0.,0.,-1.)); +#282132 = ORIENTED_EDGE('',*,*,#282133,.F.); +#282133 = EDGE_CURVE('',#282095,#282126,#282134,.T.); +#282134 = LINE('',#282135,#282136); +#282135 = CARTESIAN_POINT('',(139.187991,-78.160579,0.)); +#282136 = VECTOR('',#282137,1.); +#282137 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#282138 = PLANE('',#282139); +#282139 = AXIS2_PLACEMENT_3D('',#282140,#282141,#282142); +#282140 = CARTESIAN_POINT('',(139.187991,-78.160579,0.)); +#282141 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#282142 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#282143 = ADVANCED_FACE('',(#282144),#282169,.F.); +#282144 = FACE_BOUND('',#282145,.F.); +#282145 = EDGE_LOOP('',(#282146,#282147,#282155,#282163)); +#282146 = ORIENTED_EDGE('',*,*,#282125,.T.); +#282147 = ORIENTED_EDGE('',*,*,#282148,.T.); +#282148 = EDGE_CURVE('',#282118,#282149,#282151,.T.); +#282149 = VERTEX_POINT('',#282150); +#282150 = CARTESIAN_POINT('',(138.8,-77.796422,-3.5E-02)); +#282151 = LINE('',#282152,#282153); +#282152 = CARTESIAN_POINT('',(139.151943,-78.145647,-3.5E-02)); +#282153 = VECTOR('',#282154,1.); +#282154 = DIRECTION('',(-0.709842469048,0.704360468181,0.)); +#282155 = ORIENTED_EDGE('',*,*,#282156,.F.); +#282156 = EDGE_CURVE('',#282157,#282149,#282159,.T.); +#282157 = VERTEX_POINT('',#282158); +#282158 = CARTESIAN_POINT('',(138.8,-77.796422,0.)); +#282159 = LINE('',#282160,#282161); +#282160 = CARTESIAN_POINT('',(138.8,-77.796422,0.)); +#282161 = VECTOR('',#282162,1.); +#282162 = DIRECTION('',(0.,0.,-1.)); +#282163 = ORIENTED_EDGE('',*,*,#282164,.F.); +#282164 = EDGE_CURVE('',#282126,#282157,#282165,.T.); +#282165 = LINE('',#282166,#282167); +#282166 = CARTESIAN_POINT('',(139.151943,-78.145647,0.)); +#282167 = VECTOR('',#282168,1.); +#282168 = DIRECTION('',(-0.709842469048,0.704360468181,0.)); +#282169 = PLANE('',#282170); +#282170 = AXIS2_PLACEMENT_3D('',#282171,#282172,#282173); +#282171 = CARTESIAN_POINT('',(139.151943,-78.145647,0.)); +#282172 = DIRECTION('',(0.704360468181,0.709842469048,0.)); +#282173 = DIRECTION('',(-0.709842469048,0.704360468181,0.)); +#282174 = ADVANCED_FACE('',(#282175),#282200,.F.); +#282175 = FACE_BOUND('',#282176,.F.); +#282176 = EDGE_LOOP('',(#282177,#282178,#282186,#282194)); +#282177 = ORIENTED_EDGE('',*,*,#282156,.T.); +#282178 = ORIENTED_EDGE('',*,*,#282179,.T.); +#282179 = EDGE_CURVE('',#282149,#282180,#282182,.T.); +#282180 = VERTEX_POINT('',#282181); +#282181 = CARTESIAN_POINT('',(138.560557,-78.033147,-3.5E-02)); +#282182 = LINE('',#282183,#282184); +#282183 = CARTESIAN_POINT('',(138.8,-77.796422,-3.5E-02)); +#282184 = VECTOR('',#282185,1.); +#282185 = DIRECTION('',(-0.711131410814,-0.703059113129,0.)); +#282186 = ORIENTED_EDGE('',*,*,#282187,.F.); +#282187 = EDGE_CURVE('',#282188,#282180,#282190,.T.); +#282188 = VERTEX_POINT('',#282189); +#282189 = CARTESIAN_POINT('',(138.560557,-78.033147,0.)); +#282190 = LINE('',#282191,#282192); +#282191 = CARTESIAN_POINT('',(138.560557,-78.033147,0.)); +#282192 = VECTOR('',#282193,1.); +#282193 = DIRECTION('',(0.,0.,-1.)); +#282194 = ORIENTED_EDGE('',*,*,#282195,.F.); +#282195 = EDGE_CURVE('',#282157,#282188,#282196,.T.); +#282196 = LINE('',#282197,#282198); +#282197 = CARTESIAN_POINT('',(138.8,-77.796422,0.)); +#282198 = VECTOR('',#282199,1.); +#282199 = DIRECTION('',(-0.711131410814,-0.703059113129,0.)); +#282200 = PLANE('',#282201); +#282201 = AXIS2_PLACEMENT_3D('',#282202,#282203,#282204); +#282202 = CARTESIAN_POINT('',(138.8,-77.796422,0.)); +#282203 = DIRECTION('',(-0.703059113129,0.711131410814,0.)); +#282204 = DIRECTION('',(-0.711131410814,-0.703059113129,0.)); +#282205 = ADVANCED_FACE('',(#282206),#282231,.F.); +#282206 = FACE_BOUND('',#282207,.F.); +#282207 = EDGE_LOOP('',(#282208,#282209,#282217,#282225)); +#282208 = ORIENTED_EDGE('',*,*,#282187,.T.); +#282209 = ORIENTED_EDGE('',*,*,#282210,.T.); +#282210 = EDGE_CURVE('',#282180,#282211,#282213,.T.); +#282211 = VERTEX_POINT('',#282212); +#282212 = CARTESIAN_POINT('',(138.524509,-78.048079,-3.5E-02)); +#282213 = LINE('',#282214,#282215); +#282214 = CARTESIAN_POINT('',(138.560557,-78.033147,-3.5E-02)); +#282215 = VECTOR('',#282216,1.); +#282216 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#282217 = ORIENTED_EDGE('',*,*,#282218,.F.); +#282218 = EDGE_CURVE('',#282219,#282211,#282221,.T.); +#282219 = VERTEX_POINT('',#282220); +#282220 = CARTESIAN_POINT('',(138.524509,-78.048079,0.)); +#282221 = LINE('',#282222,#282223); +#282222 = CARTESIAN_POINT('',(138.524509,-78.048079,0.)); +#282223 = VECTOR('',#282224,1.); +#282224 = DIRECTION('',(0.,0.,-1.)); +#282225 = ORIENTED_EDGE('',*,*,#282226,.F.); +#282226 = EDGE_CURVE('',#282188,#282219,#282227,.T.); +#282227 = LINE('',#282228,#282229); +#282228 = CARTESIAN_POINT('',(138.560557,-78.033147,0.)); +#282229 = VECTOR('',#282230,1.); +#282230 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#282231 = PLANE('',#282232); +#282232 = AXIS2_PLACEMENT_3D('',#282233,#282234,#282235); +#282233 = CARTESIAN_POINT('',(138.560557,-78.033147,0.)); +#282234 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#282235 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#282236 = ADVANCED_FACE('',(#282237),#282262,.F.); +#282237 = FACE_BOUND('',#282238,.F.); +#282238 = EDGE_LOOP('',(#282239,#282240,#282248,#282256)); +#282239 = ORIENTED_EDGE('',*,*,#282218,.T.); +#282240 = ORIENTED_EDGE('',*,*,#282241,.T.); +#282241 = EDGE_CURVE('',#282211,#282242,#282244,.T.); +#282242 = VERTEX_POINT('',#282243); +#282243 = CARTESIAN_POINT('',(137.5,-78.05,-3.5E-02)); +#282244 = LINE('',#282245,#282246); +#282245 = CARTESIAN_POINT('',(138.524509,-78.048079,-3.5E-02)); +#282246 = VECTOR('',#282247,1.); +#282247 = DIRECTION('',(-0.999998242109,-1.875041237399E-03,0.)); +#282248 = ORIENTED_EDGE('',*,*,#282249,.F.); +#282249 = EDGE_CURVE('',#282250,#282242,#282252,.T.); +#282250 = VERTEX_POINT('',#282251); +#282251 = CARTESIAN_POINT('',(137.5,-78.05,0.)); +#282252 = LINE('',#282253,#282254); +#282253 = CARTESIAN_POINT('',(137.5,-78.05,0.)); +#282254 = VECTOR('',#282255,1.); +#282255 = DIRECTION('',(0.,0.,-1.)); +#282256 = ORIENTED_EDGE('',*,*,#282257,.F.); +#282257 = EDGE_CURVE('',#282219,#282250,#282258,.T.); +#282258 = LINE('',#282259,#282260); +#282259 = CARTESIAN_POINT('',(138.524509,-78.048079,0.)); +#282260 = VECTOR('',#282261,1.); +#282261 = DIRECTION('',(-0.999998242109,-1.875041237399E-03,0.)); +#282262 = PLANE('',#282263); +#282263 = AXIS2_PLACEMENT_3D('',#282264,#282265,#282266); +#282264 = CARTESIAN_POINT('',(138.524509,-78.048079,0.)); +#282265 = DIRECTION('',(-1.875041237399E-03,0.999998242109,0.)); +#282266 = DIRECTION('',(-0.999998242109,-1.875041237399E-03,0.)); +#282267 = ADVANCED_FACE('',(#282268),#282293,.F.); +#282268 = FACE_BOUND('',#282269,.F.); +#282269 = EDGE_LOOP('',(#282270,#282271,#282279,#282287)); +#282270 = ORIENTED_EDGE('',*,*,#282249,.T.); +#282271 = ORIENTED_EDGE('',*,*,#282272,.T.); +#282272 = EDGE_CURVE('',#282242,#282273,#282275,.T.); +#282273 = VERTEX_POINT('',#282274); +#282274 = CARTESIAN_POINT('',(137.5,-78.918869,-3.5E-02)); +#282275 = LINE('',#282276,#282277); +#282276 = CARTESIAN_POINT('',(137.5,-78.05,-3.5E-02)); +#282277 = VECTOR('',#282278,1.); +#282278 = DIRECTION('',(0.,-1.,0.)); +#282279 = ORIENTED_EDGE('',*,*,#282280,.F.); +#282280 = EDGE_CURVE('',#282281,#282273,#282283,.T.); +#282281 = VERTEX_POINT('',#282282); +#282282 = CARTESIAN_POINT('',(137.5,-78.918869,0.)); +#282283 = LINE('',#282284,#282285); +#282284 = CARTESIAN_POINT('',(137.5,-78.918869,0.)); +#282285 = VECTOR('',#282286,1.); +#282286 = DIRECTION('',(0.,0.,-1.)); +#282287 = ORIENTED_EDGE('',*,*,#282288,.F.); +#282288 = EDGE_CURVE('',#282250,#282281,#282289,.T.); +#282289 = LINE('',#282290,#282291); +#282290 = CARTESIAN_POINT('',(137.5,-78.05,0.)); +#282291 = VECTOR('',#282292,1.); +#282292 = DIRECTION('',(0.,-1.,0.)); +#282293 = PLANE('',#282294); +#282294 = AXIS2_PLACEMENT_3D('',#282295,#282296,#282297); +#282295 = CARTESIAN_POINT('',(137.5,-78.05,0.)); +#282296 = DIRECTION('',(-1.,-0.,-0.)); +#282297 = DIRECTION('',(0.,-1.,0.)); +#282298 = ADVANCED_FACE('',(#282299),#282324,.F.); +#282299 = FACE_BOUND('',#282300,.F.); +#282300 = EDGE_LOOP('',(#282301,#282302,#282310,#282318)); +#282301 = ORIENTED_EDGE('',*,*,#282280,.T.); +#282302 = ORIENTED_EDGE('',*,*,#282303,.T.); +#282303 = EDGE_CURVE('',#282273,#282304,#282306,.T.); +#282304 = VERTEX_POINT('',#282305); +#282305 = CARTESIAN_POINT('',(137.514805,-78.922836,-3.5E-02)); +#282306 = LINE('',#282307,#282308); +#282307 = CARTESIAN_POINT('',(137.5,-78.918869,-3.5E-02)); +#282308 = VECTOR('',#282309,1.); +#282309 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#282310 = ORIENTED_EDGE('',*,*,#282311,.F.); +#282311 = EDGE_CURVE('',#282312,#282304,#282314,.T.); +#282312 = VERTEX_POINT('',#282313); +#282313 = CARTESIAN_POINT('',(137.514805,-78.922836,0.)); +#282314 = LINE('',#282315,#282316); +#282315 = CARTESIAN_POINT('',(137.514805,-78.922836,0.)); +#282316 = VECTOR('',#282317,1.); +#282317 = DIRECTION('',(0.,0.,-1.)); +#282318 = ORIENTED_EDGE('',*,*,#282319,.F.); +#282319 = EDGE_CURVE('',#282281,#282312,#282320,.T.); +#282320 = LINE('',#282321,#282322); +#282321 = CARTESIAN_POINT('',(137.5,-78.918869,0.)); +#282322 = VECTOR('',#282323,1.); +#282323 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#282324 = PLANE('',#282325); +#282325 = AXIS2_PLACEMENT_3D('',#282326,#282327,#282328); +#282326 = CARTESIAN_POINT('',(137.5,-78.918869,0.)); +#282327 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#282328 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#282329 = ADVANCED_FACE('',(#282330),#282357,.T.); +#282330 = FACE_BOUND('',#282331,.F.); +#282331 = EDGE_LOOP('',(#282332,#282333,#282342,#282350)); +#282332 = ORIENTED_EDGE('',*,*,#282311,.T.); +#282333 = ORIENTED_EDGE('',*,*,#282334,.T.); +#282334 = EDGE_CURVE('',#282304,#282335,#282337,.T.); +#282335 = VERTEX_POINT('',#282336); +#282336 = CARTESIAN_POINT('',(137.285195,-78.922836,-3.5E-02)); +#282337 = CIRCLE('',#282338,0.299999850918); +#282338 = AXIS2_PLACEMENT_3D('',#282339,#282340,#282341); +#282339 = CARTESIAN_POINT('',(137.4,-79.19999971069,-3.5E-02)); +#282340 = DIRECTION('',(0.,0.,-1.)); +#282341 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#282342 = ORIENTED_EDGE('',*,*,#282343,.F.); +#282343 = EDGE_CURVE('',#282344,#282335,#282346,.T.); +#282344 = VERTEX_POINT('',#282345); +#282345 = CARTESIAN_POINT('',(137.285195,-78.922836,0.)); +#282346 = LINE('',#282347,#282348); +#282347 = CARTESIAN_POINT('',(137.285195,-78.922836,0.)); +#282348 = VECTOR('',#282349,1.); +#282349 = DIRECTION('',(0.,0.,-1.)); +#282350 = ORIENTED_EDGE('',*,*,#282351,.F.); +#282351 = EDGE_CURVE('',#282312,#282344,#282352,.T.); +#282352 = CIRCLE('',#282353,0.299999850918); +#282353 = AXIS2_PLACEMENT_3D('',#282354,#282355,#282356); +#282354 = CARTESIAN_POINT('',(137.4,-79.19999971069,0.)); +#282355 = DIRECTION('',(0.,0.,-1.)); +#282356 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#282357 = CYLINDRICAL_SURFACE('',#282358,0.299999850918); +#282358 = AXIS2_PLACEMENT_3D('',#282359,#282360,#282361); +#282359 = CARTESIAN_POINT('',(137.4,-79.19999971069,0.)); +#282360 = DIRECTION('',(-0.,-0.,1.)); +#282361 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#282362 = ADVANCED_FACE('',(#282363),#282388,.F.); +#282363 = FACE_BOUND('',#282364,.F.); +#282364 = EDGE_LOOP('',(#282365,#282366,#282374,#282382)); +#282365 = ORIENTED_EDGE('',*,*,#282343,.T.); +#282366 = ORIENTED_EDGE('',*,*,#282367,.T.); +#282367 = EDGE_CURVE('',#282335,#282368,#282370,.T.); +#282368 = VERTEX_POINT('',#282369); +#282369 = CARTESIAN_POINT('',(137.3,-78.918869,-3.5E-02)); +#282370 = LINE('',#282371,#282372); +#282371 = CARTESIAN_POINT('',(137.285195,-78.922836,-3.5E-02)); +#282372 = VECTOR('',#282373,1.); +#282373 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#282374 = ORIENTED_EDGE('',*,*,#282375,.F.); +#282375 = EDGE_CURVE('',#282376,#282368,#282378,.T.); +#282376 = VERTEX_POINT('',#282377); +#282377 = CARTESIAN_POINT('',(137.3,-78.918869,0.)); +#282378 = LINE('',#282379,#282380); +#282379 = CARTESIAN_POINT('',(137.3,-78.918869,0.)); +#282380 = VECTOR('',#282381,1.); +#282381 = DIRECTION('',(0.,0.,-1.)); +#282382 = ORIENTED_EDGE('',*,*,#282383,.F.); +#282383 = EDGE_CURVE('',#282344,#282376,#282384,.T.); +#282384 = LINE('',#282385,#282386); +#282385 = CARTESIAN_POINT('',(137.285195,-78.922836,0.)); +#282386 = VECTOR('',#282387,1.); +#282387 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#282388 = PLANE('',#282389); +#282389 = AXIS2_PLACEMENT_3D('',#282390,#282391,#282392); +#282390 = CARTESIAN_POINT('',(137.285195,-78.922836,0.)); +#282391 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#282392 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#282393 = ADVANCED_FACE('',(#282394),#282419,.F.); +#282394 = FACE_BOUND('',#282395,.F.); +#282395 = EDGE_LOOP('',(#282396,#282397,#282405,#282413)); +#282396 = ORIENTED_EDGE('',*,*,#282375,.T.); +#282397 = ORIENTED_EDGE('',*,*,#282398,.T.); +#282398 = EDGE_CURVE('',#282368,#282399,#282401,.T.); +#282399 = VERTEX_POINT('',#282400); +#282400 = CARTESIAN_POINT('',(137.301921,-77.930491,-3.5E-02)); +#282401 = LINE('',#282402,#282403); +#282402 = CARTESIAN_POINT('',(137.3,-78.918869,-3.5E-02)); +#282403 = VECTOR('',#282404,1.); +#282404 = DIRECTION('',(1.943584713206E-03,0.999998111237,0.)); +#282405 = ORIENTED_EDGE('',*,*,#282406,.F.); +#282406 = EDGE_CURVE('',#282407,#282399,#282409,.T.); +#282407 = VERTEX_POINT('',#282408); +#282408 = CARTESIAN_POINT('',(137.301921,-77.930491,0.)); +#282409 = LINE('',#282410,#282411); +#282410 = CARTESIAN_POINT('',(137.301921,-77.930491,0.)); +#282411 = VECTOR('',#282412,1.); +#282412 = DIRECTION('',(0.,0.,-1.)); +#282413 = ORIENTED_EDGE('',*,*,#282414,.F.); +#282414 = EDGE_CURVE('',#282376,#282407,#282415,.T.); +#282415 = LINE('',#282416,#282417); +#282416 = CARTESIAN_POINT('',(137.3,-78.918869,0.)); +#282417 = VECTOR('',#282418,1.); +#282418 = DIRECTION('',(1.943584713206E-03,0.999998111237,0.)); +#282419 = PLANE('',#282420); +#282420 = AXIS2_PLACEMENT_3D('',#282421,#282422,#282423); +#282421 = CARTESIAN_POINT('',(137.3,-78.918869,0.)); +#282422 = DIRECTION('',(0.999998111237,-1.943584713206E-03,0.)); +#282423 = DIRECTION('',(1.943584713206E-03,0.999998111237,0.)); +#282424 = ADVANCED_FACE('',(#282425),#282452,.T.); +#282425 = FACE_BOUND('',#282426,.F.); +#282426 = EDGE_LOOP('',(#282427,#282428,#282437,#282445)); +#282427 = ORIENTED_EDGE('',*,*,#282406,.T.); +#282428 = ORIENTED_EDGE('',*,*,#282429,.T.); +#282429 = EDGE_CURVE('',#282399,#282430,#282432,.T.); +#282430 = VERTEX_POINT('',#282431); +#282431 = CARTESIAN_POINT('',(137.380491,-77.851921,-3.5E-02)); +#282432 = CIRCLE('',#282433,0.100002891901); +#282433 = AXIS2_PLACEMENT_3D('',#282434,#282435,#282436); +#282434 = CARTESIAN_POINT('',(137.40000207103,-77.95000207103,-3.5E-02) + ); +#282435 = DIRECTION('',(0.,0.,-1.)); +#282436 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#282437 = ORIENTED_EDGE('',*,*,#282438,.F.); +#282438 = EDGE_CURVE('',#282439,#282430,#282441,.T.); +#282439 = VERTEX_POINT('',#282440); +#282440 = CARTESIAN_POINT('',(137.380491,-77.851921,0.)); +#282441 = LINE('',#282442,#282443); +#282442 = CARTESIAN_POINT('',(137.380491,-77.851921,0.)); +#282443 = VECTOR('',#282444,1.); +#282444 = DIRECTION('',(0.,0.,-1.)); +#282445 = ORIENTED_EDGE('',*,*,#282446,.F.); +#282446 = EDGE_CURVE('',#282407,#282439,#282447,.T.); +#282447 = CIRCLE('',#282448,0.100002891901); +#282448 = AXIS2_PLACEMENT_3D('',#282449,#282450,#282451); +#282449 = CARTESIAN_POINT('',(137.40000207103,-77.95000207103,0.)); +#282450 = DIRECTION('',(0.,0.,-1.)); +#282451 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#282452 = CYLINDRICAL_SURFACE('',#282453,0.100002891901); +#282453 = AXIS2_PLACEMENT_3D('',#282454,#282455,#282456); +#282454 = CARTESIAN_POINT('',(137.40000207103,-77.95000207103,0.)); +#282455 = DIRECTION('',(-0.,-0.,1.)); +#282456 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#282457 = ADVANCED_FACE('',(#282458),#282483,.F.); +#282458 = FACE_BOUND('',#282459,.F.); +#282459 = EDGE_LOOP('',(#282460,#282461,#282469,#282477)); +#282460 = ORIENTED_EDGE('',*,*,#282438,.T.); +#282461 = ORIENTED_EDGE('',*,*,#282462,.T.); +#282462 = EDGE_CURVE('',#282430,#282463,#282465,.T.); +#282463 = VERTEX_POINT('',#282464); +#282464 = CARTESIAN_POINT('',(138.463578,-77.85,-3.5E-02)); +#282465 = LINE('',#282466,#282467); +#282466 = CARTESIAN_POINT('',(137.380491,-77.851921,-3.5E-02)); +#282467 = VECTOR('',#282468,1.); +#282468 = DIRECTION('',(0.999998427115,1.773631276617E-03,0.)); +#282469 = ORIENTED_EDGE('',*,*,#282470,.F.); +#282470 = EDGE_CURVE('',#282471,#282463,#282473,.T.); +#282471 = VERTEX_POINT('',#282472); +#282472 = CARTESIAN_POINT('',(138.463578,-77.85,0.)); +#282473 = LINE('',#282474,#282475); +#282474 = CARTESIAN_POINT('',(138.463578,-77.85,0.)); +#282475 = VECTOR('',#282476,1.); +#282476 = DIRECTION('',(0.,0.,-1.)); +#282477 = ORIENTED_EDGE('',*,*,#282478,.F.); +#282478 = EDGE_CURVE('',#282439,#282471,#282479,.T.); +#282479 = LINE('',#282480,#282481); +#282480 = CARTESIAN_POINT('',(137.380491,-77.851921,0.)); +#282481 = VECTOR('',#282482,1.); +#282482 = DIRECTION('',(0.999998427115,1.773631276617E-03,0.)); +#282483 = PLANE('',#282484); +#282484 = AXIS2_PLACEMENT_3D('',#282485,#282486,#282487); +#282485 = CARTESIAN_POINT('',(137.380491,-77.851921,0.)); +#282486 = DIRECTION('',(1.773631276617E-03,-0.999998427115,0.)); +#282487 = DIRECTION('',(0.999998427115,1.773631276617E-03,0.)); +#282488 = ADVANCED_FACE('',(#282489),#282505,.F.); +#282489 = FACE_BOUND('',#282490,.F.); +#282490 = EDGE_LOOP('',(#282491,#282492,#282498,#282499)); +#282491 = ORIENTED_EDGE('',*,*,#282470,.T.); +#282492 = ORIENTED_EDGE('',*,*,#282493,.T.); +#282493 = EDGE_CURVE('',#282463,#281951,#282494,.T.); +#282494 = LINE('',#282495,#282496); +#282495 = CARTESIAN_POINT('',(138.463578,-77.85,-3.5E-02)); +#282496 = VECTOR('',#282497,1.); +#282497 = DIRECTION('',(0.710536441507,0.703660404806,0.)); +#282498 = ORIENTED_EDGE('',*,*,#281948,.F.); +#282499 = ORIENTED_EDGE('',*,*,#282500,.F.); +#282500 = EDGE_CURVE('',#282471,#281949,#282501,.T.); +#282501 = LINE('',#282502,#282503); +#282502 = CARTESIAN_POINT('',(138.463578,-77.85,0.)); +#282503 = VECTOR('',#282504,1.); +#282504 = DIRECTION('',(0.710536441507,0.703660404806,0.)); +#282505 = PLANE('',#282506); +#282506 = AXIS2_PLACEMENT_3D('',#282507,#282508,#282509); +#282507 = CARTESIAN_POINT('',(138.463578,-77.85,0.)); +#282508 = DIRECTION('',(0.703660404806,-0.710536441507,0.)); +#282509 = DIRECTION('',(0.710536441507,0.703660404806,0.)); +#282510 = ADVANCED_FACE('',(#282511),#282538,.F.); +#282511 = FACE_BOUND('',#282512,.F.); +#282512 = EDGE_LOOP('',(#282513,#282523,#282530,#282531)); +#282513 = ORIENTED_EDGE('',*,*,#282514,.T.); +#282514 = EDGE_CURVE('',#282515,#282517,#282519,.T.); +#282515 = VERTEX_POINT('',#282516); +#282516 = CARTESIAN_POINT('',(137.537255,-79.2,0.)); +#282517 = VERTEX_POINT('',#282518); +#282518 = CARTESIAN_POINT('',(137.537255,-79.2,-3.5E-02)); +#282519 = LINE('',#282520,#282521); +#282520 = CARTESIAN_POINT('',(137.537255,-79.2,0.)); +#282521 = VECTOR('',#282522,1.); +#282522 = DIRECTION('',(0.,0.,-1.)); +#282523 = ORIENTED_EDGE('',*,*,#282524,.T.); +#282524 = EDGE_CURVE('',#282517,#282517,#282525,.T.); +#282525 = CIRCLE('',#282526,0.137255); +#282526 = AXIS2_PLACEMENT_3D('',#282527,#282528,#282529); +#282527 = CARTESIAN_POINT('',(137.4,-79.2,-3.5E-02)); +#282528 = DIRECTION('',(0.,0.,1.)); +#282529 = DIRECTION('',(1.,0.,-0.)); +#282530 = ORIENTED_EDGE('',*,*,#282514,.F.); +#282531 = ORIENTED_EDGE('',*,*,#282532,.F.); +#282532 = EDGE_CURVE('',#282515,#282515,#282533,.T.); +#282533 = CIRCLE('',#282534,0.137255); +#282534 = AXIS2_PLACEMENT_3D('',#282535,#282536,#282537); +#282535 = CARTESIAN_POINT('',(137.4,-79.2,0.)); +#282536 = DIRECTION('',(0.,0.,1.)); +#282537 = DIRECTION('',(1.,0.,-0.)); +#282538 = CYLINDRICAL_SURFACE('',#282539,0.137255); +#282539 = AXIS2_PLACEMENT_3D('',#282540,#282541,#282542); +#282540 = CARTESIAN_POINT('',(137.4,-79.2,0.)); +#282541 = DIRECTION('',(0.,0.,1.)); +#282542 = DIRECTION('',(1.,0.,-0.)); +#282543 = ADVANCED_FACE('',(#282544,#282564),#282567,.F.); +#282544 = FACE_BOUND('',#282545,.F.); +#282545 = EDGE_LOOP('',(#282546,#282547,#282548,#282549,#282550,#282551, + #282552,#282553,#282554,#282555,#282556,#282557,#282558,#282559, + #282560,#282561,#282562,#282563)); +#282546 = ORIENTED_EDGE('',*,*,#281975,.T.); +#282547 = ORIENTED_EDGE('',*,*,#282007,.T.); +#282548 = ORIENTED_EDGE('',*,*,#282038,.T.); +#282549 = ORIENTED_EDGE('',*,*,#282070,.T.); +#282550 = ORIENTED_EDGE('',*,*,#282102,.T.); +#282551 = ORIENTED_EDGE('',*,*,#282133,.T.); +#282552 = ORIENTED_EDGE('',*,*,#282164,.T.); +#282553 = ORIENTED_EDGE('',*,*,#282195,.T.); +#282554 = ORIENTED_EDGE('',*,*,#282226,.T.); +#282555 = ORIENTED_EDGE('',*,*,#282257,.T.); +#282556 = ORIENTED_EDGE('',*,*,#282288,.T.); +#282557 = ORIENTED_EDGE('',*,*,#282319,.T.); +#282558 = ORIENTED_EDGE('',*,*,#282351,.T.); +#282559 = ORIENTED_EDGE('',*,*,#282383,.T.); +#282560 = ORIENTED_EDGE('',*,*,#282414,.T.); +#282561 = ORIENTED_EDGE('',*,*,#282446,.T.); +#282562 = ORIENTED_EDGE('',*,*,#282478,.T.); +#282563 = ORIENTED_EDGE('',*,*,#282500,.T.); +#282564 = FACE_BOUND('',#282565,.F.); +#282565 = EDGE_LOOP('',(#282566)); +#282566 = ORIENTED_EDGE('',*,*,#282532,.T.); +#282567 = PLANE('',#282568); +#282568 = AXIS2_PLACEMENT_3D('',#282569,#282570,#282571); +#282569 = CARTESIAN_POINT('',(0.,0.,0.)); +#282570 = DIRECTION('',(-0.,-0.,-1.)); +#282571 = DIRECTION('',(-1.,0.,0.)); +#282572 = ADVANCED_FACE('',(#282573,#282593),#282596,.T.); +#282573 = FACE_BOUND('',#282574,.T.); +#282574 = EDGE_LOOP('',(#282575,#282576,#282577,#282578,#282579,#282580, + #282581,#282582,#282583,#282584,#282585,#282586,#282587,#282588, + #282589,#282590,#282591,#282592)); +#282575 = ORIENTED_EDGE('',*,*,#281958,.T.); +#282576 = ORIENTED_EDGE('',*,*,#281991,.T.); +#282577 = ORIENTED_EDGE('',*,*,#282022,.T.); +#282578 = ORIENTED_EDGE('',*,*,#282053,.T.); +#282579 = ORIENTED_EDGE('',*,*,#282086,.T.); +#282580 = ORIENTED_EDGE('',*,*,#282117,.T.); +#282581 = ORIENTED_EDGE('',*,*,#282148,.T.); +#282582 = ORIENTED_EDGE('',*,*,#282179,.T.); +#282583 = ORIENTED_EDGE('',*,*,#282210,.T.); +#282584 = ORIENTED_EDGE('',*,*,#282241,.T.); +#282585 = ORIENTED_EDGE('',*,*,#282272,.T.); +#282586 = ORIENTED_EDGE('',*,*,#282303,.T.); +#282587 = ORIENTED_EDGE('',*,*,#282334,.T.); +#282588 = ORIENTED_EDGE('',*,*,#282367,.T.); +#282589 = ORIENTED_EDGE('',*,*,#282398,.T.); +#282590 = ORIENTED_EDGE('',*,*,#282429,.T.); +#282591 = ORIENTED_EDGE('',*,*,#282462,.T.); +#282592 = ORIENTED_EDGE('',*,*,#282493,.T.); +#282593 = FACE_BOUND('',#282594,.T.); +#282594 = EDGE_LOOP('',(#282595)); +#282595 = ORIENTED_EDGE('',*,*,#282524,.T.); +#282596 = PLANE('',#282597); +#282597 = AXIS2_PLACEMENT_3D('',#282598,#282599,#282600); +#282598 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#282599 = DIRECTION('',(-0.,-0.,-1.)); +#282600 = DIRECTION('',(-1.,0.,0.)); +#282601 = MANIFOLD_SOLID_BREP('',#282602); +#282602 = CLOSED_SHELL('',(#282603,#282643,#282676,#282707,#282740, + #282771,#282802,#282833,#282866,#282888,#282921,#282941)); +#282603 = ADVANCED_FACE('',(#282604),#282638,.F.); +#282604 = FACE_BOUND('',#282605,.F.); +#282605 = EDGE_LOOP('',(#282606,#282616,#282624,#282632)); +#282606 = ORIENTED_EDGE('',*,*,#282607,.T.); +#282607 = EDGE_CURVE('',#282608,#282610,#282612,.T.); +#282608 = VERTEX_POINT('',#282609); +#282609 = CARTESIAN_POINT('',(140.2695,-75.578078,0.)); +#282610 = VERTEX_POINT('',#282611); +#282611 = CARTESIAN_POINT('',(140.2695,-75.578078,-3.5E-02)); +#282612 = LINE('',#282613,#282614); +#282613 = CARTESIAN_POINT('',(140.2695,-75.578078,0.)); +#282614 = VECTOR('',#282615,1.); +#282615 = DIRECTION('',(0.,0.,-1.)); +#282616 = ORIENTED_EDGE('',*,*,#282617,.T.); +#282617 = EDGE_CURVE('',#282610,#282618,#282620,.T.); +#282618 = VERTEX_POINT('',#282619); +#282619 = CARTESIAN_POINT('',(140.883147,-76.194443,-3.5E-02)); +#282620 = LINE('',#282621,#282622); +#282621 = CARTESIAN_POINT('',(140.2695,-75.578078,-3.5E-02)); +#282622 = VECTOR('',#282623,1.); +#282623 = DIRECTION('',(0.705542540355,-0.70866756928,0.)); +#282624 = ORIENTED_EDGE('',*,*,#282625,.F.); +#282625 = EDGE_CURVE('',#282626,#282618,#282628,.T.); +#282626 = VERTEX_POINT('',#282627); +#282627 = CARTESIAN_POINT('',(140.883147,-76.194443,0.)); +#282628 = LINE('',#282629,#282630); +#282629 = CARTESIAN_POINT('',(140.883147,-76.194443,0.)); +#282630 = VECTOR('',#282631,1.); +#282631 = DIRECTION('',(0.,0.,-1.)); +#282632 = ORIENTED_EDGE('',*,*,#282633,.F.); +#282633 = EDGE_CURVE('',#282608,#282626,#282634,.T.); +#282634 = LINE('',#282635,#282636); +#282635 = CARTESIAN_POINT('',(140.2695,-75.578078,0.)); +#282636 = VECTOR('',#282637,1.); +#282637 = DIRECTION('',(0.705542540355,-0.70866756928,0.)); +#282638 = PLANE('',#282639); +#282639 = AXIS2_PLACEMENT_3D('',#282640,#282641,#282642); +#282640 = CARTESIAN_POINT('',(140.2695,-75.578078,0.)); +#282641 = DIRECTION('',(-0.70866756928,-0.705542540355,-0.)); +#282642 = DIRECTION('',(0.705542540355,-0.70866756928,0.)); +#282643 = ADVANCED_FACE('',(#282644),#282671,.T.); +#282644 = FACE_BOUND('',#282645,.F.); +#282645 = EDGE_LOOP('',(#282646,#282647,#282656,#282664)); +#282646 = ORIENTED_EDGE('',*,*,#282625,.T.); +#282647 = ORIENTED_EDGE('',*,*,#282648,.T.); +#282648 = EDGE_CURVE('',#282618,#282649,#282651,.T.); +#282649 = VERTEX_POINT('',#282650); +#282650 = CARTESIAN_POINT('',(140.883147,-76.455557,-3.5E-02)); +#282651 = CIRCLE('',#282652,0.294702136064); +#282652 = AXIS2_PLACEMENT_3D('',#282653,#282654,#282655); +#282653 = CARTESIAN_POINT('',(140.61894211974,-76.325,-3.5E-02)); +#282654 = DIRECTION('',(0.,0.,-1.)); +#282655 = DIRECTION('',(0.896514982164,0.443013415999,0.)); +#282656 = ORIENTED_EDGE('',*,*,#282657,.F.); +#282657 = EDGE_CURVE('',#282658,#282649,#282660,.T.); +#282658 = VERTEX_POINT('',#282659); +#282659 = CARTESIAN_POINT('',(140.883147,-76.455557,0.)); +#282660 = LINE('',#282661,#282662); +#282661 = CARTESIAN_POINT('',(140.883147,-76.455557,0.)); +#282662 = VECTOR('',#282663,1.); +#282663 = DIRECTION('',(0.,0.,-1.)); +#282664 = ORIENTED_EDGE('',*,*,#282665,.F.); +#282665 = EDGE_CURVE('',#282626,#282658,#282666,.T.); +#282666 = CIRCLE('',#282667,0.294702136064); +#282667 = AXIS2_PLACEMENT_3D('',#282668,#282669,#282670); +#282668 = CARTESIAN_POINT('',(140.61894211974,-76.325,0.)); +#282669 = DIRECTION('',(0.,0.,-1.)); +#282670 = DIRECTION('',(0.896514982164,0.443013415999,0.)); +#282671 = CYLINDRICAL_SURFACE('',#282672,0.294702136064); +#282672 = AXIS2_PLACEMENT_3D('',#282673,#282674,#282675); +#282673 = CARTESIAN_POINT('',(140.61894211974,-76.325,0.)); +#282674 = DIRECTION('',(-0.,-0.,1.)); +#282675 = DIRECTION('',(0.896514982164,0.443013415999,0.)); +#282676 = ADVANCED_FACE('',(#282677),#282702,.F.); +#282677 = FACE_BOUND('',#282678,.F.); +#282678 = EDGE_LOOP('',(#282679,#282680,#282688,#282696)); +#282679 = ORIENTED_EDGE('',*,*,#282657,.T.); +#282680 = ORIENTED_EDGE('',*,*,#282681,.T.); +#282681 = EDGE_CURVE('',#282649,#282682,#282684,.T.); +#282682 = VERTEX_POINT('',#282683); +#282683 = CARTESIAN_POINT('',(140.855557,-76.483147,-3.5E-02)); +#282684 = LINE('',#282685,#282686); +#282685 = CARTESIAN_POINT('',(140.883147,-76.455557,-3.5E-02)); +#282686 = VECTOR('',#282687,1.); +#282687 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#282688 = ORIENTED_EDGE('',*,*,#282689,.F.); +#282689 = EDGE_CURVE('',#282690,#282682,#282692,.T.); +#282690 = VERTEX_POINT('',#282691); +#282691 = CARTESIAN_POINT('',(140.855557,-76.483147,0.)); +#282692 = LINE('',#282693,#282694); +#282693 = CARTESIAN_POINT('',(140.855557,-76.483147,0.)); +#282694 = VECTOR('',#282695,1.); +#282695 = DIRECTION('',(0.,0.,-1.)); +#282696 = ORIENTED_EDGE('',*,*,#282697,.F.); +#282697 = EDGE_CURVE('',#282658,#282690,#282698,.T.); +#282698 = LINE('',#282699,#282700); +#282699 = CARTESIAN_POINT('',(140.883147,-76.455557,0.)); +#282700 = VECTOR('',#282701,1.); +#282701 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#282702 = PLANE('',#282703); +#282703 = AXIS2_PLACEMENT_3D('',#282704,#282705,#282706); +#282704 = CARTESIAN_POINT('',(140.883147,-76.455557,0.)); +#282705 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#282706 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#282707 = ADVANCED_FACE('',(#282708),#282735,.T.); +#282708 = FACE_BOUND('',#282709,.F.); +#282709 = EDGE_LOOP('',(#282710,#282711,#282720,#282728)); +#282710 = ORIENTED_EDGE('',*,*,#282689,.T.); +#282711 = ORIENTED_EDGE('',*,*,#282712,.T.); +#282712 = EDGE_CURVE('',#282682,#282713,#282715,.T.); +#282713 = VERTEX_POINT('',#282714); +#282714 = CARTESIAN_POINT('',(140.701921,-76.419509,-3.5E-02)); +#282715 = CIRCLE('',#282716,9.999988522645E-02); +#282716 = AXIS2_PLACEMENT_3D('',#282717,#282718,#282719); +#282717 = CARTESIAN_POINT('',(140.79999951407,-76.40000048592,-3.5E-02) + ); +#282718 = DIRECTION('',(-0.,0.,-1.)); +#282719 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#282720 = ORIENTED_EDGE('',*,*,#282721,.F.); +#282721 = EDGE_CURVE('',#282722,#282713,#282724,.T.); +#282722 = VERTEX_POINT('',#282723); +#282723 = CARTESIAN_POINT('',(140.701921,-76.419509,0.)); +#282724 = LINE('',#282725,#282726); +#282725 = CARTESIAN_POINT('',(140.701921,-76.419509,0.)); +#282726 = VECTOR('',#282727,1.); +#282727 = DIRECTION('',(0.,0.,-1.)); +#282728 = ORIENTED_EDGE('',*,*,#282729,.F.); +#282729 = EDGE_CURVE('',#282690,#282722,#282730,.T.); +#282730 = CIRCLE('',#282731,9.999988522645E-02); +#282731 = AXIS2_PLACEMENT_3D('',#282732,#282733,#282734); +#282732 = CARTESIAN_POINT('',(140.79999951407,-76.40000048592,0.)); +#282733 = DIRECTION('',(-0.,0.,-1.)); +#282734 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#282735 = CYLINDRICAL_SURFACE('',#282736,9.999988522645E-02); +#282736 = AXIS2_PLACEMENT_3D('',#282737,#282738,#282739); +#282737 = CARTESIAN_POINT('',(140.79999951407,-76.40000048592,0.)); +#282738 = DIRECTION('',(0.,-0.,1.)); +#282739 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#282740 = ADVANCED_FACE('',(#282741),#282766,.F.); +#282741 = FACE_BOUND('',#282742,.F.); +#282742 = EDGE_LOOP('',(#282743,#282744,#282752,#282760)); +#282743 = ORIENTED_EDGE('',*,*,#282721,.T.); +#282744 = ORIENTED_EDGE('',*,*,#282745,.T.); +#282745 = EDGE_CURVE('',#282713,#282746,#282748,.T.); +#282746 = VERTEX_POINT('',#282747); +#282747 = CARTESIAN_POINT('',(140.7,-76.291422,-3.5E-02)); +#282748 = LINE('',#282749,#282750); +#282749 = CARTESIAN_POINT('',(140.701921,-76.419509,-3.5E-02)); +#282750 = VECTOR('',#282751,1.); +#282751 = DIRECTION('',(-1.499593239406E-02,0.999887554684,0.)); +#282752 = ORIENTED_EDGE('',*,*,#282753,.F.); +#282753 = EDGE_CURVE('',#282754,#282746,#282756,.T.); +#282754 = VERTEX_POINT('',#282755); +#282755 = CARTESIAN_POINT('',(140.7,-76.291422,0.)); +#282756 = LINE('',#282757,#282758); +#282757 = CARTESIAN_POINT('',(140.7,-76.291422,0.)); +#282758 = VECTOR('',#282759,1.); +#282759 = DIRECTION('',(0.,0.,-1.)); +#282760 = ORIENTED_EDGE('',*,*,#282761,.F.); +#282761 = EDGE_CURVE('',#282722,#282754,#282762,.T.); +#282762 = LINE('',#282763,#282764); +#282763 = CARTESIAN_POINT('',(140.701921,-76.419509,0.)); +#282764 = VECTOR('',#282765,1.); +#282765 = DIRECTION('',(-1.499593239406E-02,0.999887554684,0.)); +#282766 = PLANE('',#282767); +#282767 = AXIS2_PLACEMENT_3D('',#282768,#282769,#282770); +#282768 = CARTESIAN_POINT('',(140.701921,-76.419509,0.)); +#282769 = DIRECTION('',(0.999887554684,1.499593239406E-02,0.)); +#282770 = DIRECTION('',(-1.499593239406E-02,0.999887554684,0.)); +#282771 = ADVANCED_FACE('',(#282772),#282797,.F.); +#282772 = FACE_BOUND('',#282773,.F.); +#282773 = EDGE_LOOP('',(#282774,#282775,#282783,#282791)); +#282774 = ORIENTED_EDGE('',*,*,#282753,.T.); +#282775 = ORIENTED_EDGE('',*,*,#282776,.T.); +#282776 = EDGE_CURVE('',#282746,#282777,#282779,.T.); +#282777 = VERTEX_POINT('',#282778); +#282778 = CARTESIAN_POINT('',(140.128078,-75.7195,-3.5E-02)); +#282779 = LINE('',#282780,#282781); +#282780 = CARTESIAN_POINT('',(140.7,-76.291422,-3.5E-02)); +#282781 = VECTOR('',#282782,1.); +#282782 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#282783 = ORIENTED_EDGE('',*,*,#282784,.F.); +#282784 = EDGE_CURVE('',#282785,#282777,#282787,.T.); +#282785 = VERTEX_POINT('',#282786); +#282786 = CARTESIAN_POINT('',(140.128078,-75.7195,0.)); +#282787 = LINE('',#282788,#282789); +#282788 = CARTESIAN_POINT('',(140.128078,-75.7195,0.)); +#282789 = VECTOR('',#282790,1.); +#282790 = DIRECTION('',(0.,0.,-1.)); +#282791 = ORIENTED_EDGE('',*,*,#282792,.F.); +#282792 = EDGE_CURVE('',#282754,#282785,#282793,.T.); +#282793 = LINE('',#282794,#282795); +#282794 = CARTESIAN_POINT('',(140.7,-76.291422,0.)); +#282795 = VECTOR('',#282796,1.); +#282796 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#282797 = PLANE('',#282798); +#282798 = AXIS2_PLACEMENT_3D('',#282799,#282800,#282801); +#282799 = CARTESIAN_POINT('',(140.7,-76.291422,0.)); +#282800 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#282801 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#282802 = ADVANCED_FACE('',(#282803),#282828,.F.); +#282803 = FACE_BOUND('',#282804,.F.); +#282804 = EDGE_LOOP('',(#282805,#282806,#282814,#282822)); +#282805 = ORIENTED_EDGE('',*,*,#282784,.T.); +#282806 = ORIENTED_EDGE('',*,*,#282807,.T.); +#282807 = EDGE_CURVE('',#282777,#282808,#282810,.T.); +#282808 = VERTEX_POINT('',#282809); +#282809 = CARTESIAN_POINT('',(140.114805,-75.727164,-3.5E-02)); +#282810 = LINE('',#282811,#282812); +#282811 = CARTESIAN_POINT('',(140.128078,-75.7195,-3.5E-02)); +#282812 = VECTOR('',#282813,1.); +#282813 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#282814 = ORIENTED_EDGE('',*,*,#282815,.F.); +#282815 = EDGE_CURVE('',#282816,#282808,#282818,.T.); +#282816 = VERTEX_POINT('',#282817); +#282817 = CARTESIAN_POINT('',(140.114805,-75.727164,0.)); +#282818 = LINE('',#282819,#282820); +#282819 = CARTESIAN_POINT('',(140.114805,-75.727164,0.)); +#282820 = VECTOR('',#282821,1.); +#282821 = DIRECTION('',(0.,0.,-1.)); +#282822 = ORIENTED_EDGE('',*,*,#282823,.F.); +#282823 = EDGE_CURVE('',#282785,#282816,#282824,.T.); +#282824 = LINE('',#282825,#282826); +#282825 = CARTESIAN_POINT('',(140.128078,-75.7195,0.)); +#282826 = VECTOR('',#282827,1.); +#282827 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#282828 = PLANE('',#282829); +#282829 = AXIS2_PLACEMENT_3D('',#282830,#282831,#282832); +#282830 = CARTESIAN_POINT('',(140.128078,-75.7195,0.)); +#282831 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#282832 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#282833 = ADVANCED_FACE('',(#282834),#282861,.T.); +#282834 = FACE_BOUND('',#282835,.F.); +#282835 = EDGE_LOOP('',(#282836,#282837,#282846,#282854)); +#282836 = ORIENTED_EDGE('',*,*,#282815,.T.); +#282837 = ORIENTED_EDGE('',*,*,#282838,.T.); +#282838 = EDGE_CURVE('',#282808,#282839,#282841,.T.); +#282839 = VERTEX_POINT('',#282840); +#282840 = CARTESIAN_POINT('',(140.277164,-75.564805,-3.5E-02)); +#282841 = CIRCLE('',#282842,0.300000118202); +#282842 = AXIS2_PLACEMENT_3D('',#282843,#282844,#282845); +#282843 = CARTESIAN_POINT('',(140.,-75.45,-3.5E-02)); +#282844 = DIRECTION('',(0.,0.,-1.)); +#282845 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#282846 = ORIENTED_EDGE('',*,*,#282847,.F.); +#282847 = EDGE_CURVE('',#282848,#282839,#282850,.T.); +#282848 = VERTEX_POINT('',#282849); +#282849 = CARTESIAN_POINT('',(140.277164,-75.564805,0.)); +#282850 = LINE('',#282851,#282852); +#282851 = CARTESIAN_POINT('',(140.277164,-75.564805,0.)); +#282852 = VECTOR('',#282853,1.); +#282853 = DIRECTION('',(0.,0.,-1.)); +#282854 = ORIENTED_EDGE('',*,*,#282855,.F.); +#282855 = EDGE_CURVE('',#282816,#282848,#282856,.T.); +#282856 = CIRCLE('',#282857,0.300000118202); +#282857 = AXIS2_PLACEMENT_3D('',#282858,#282859,#282860); +#282858 = CARTESIAN_POINT('',(140.,-75.45,0.)); +#282859 = DIRECTION('',(0.,0.,-1.)); +#282860 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#282861 = CYLINDRICAL_SURFACE('',#282862,0.300000118202); +#282862 = AXIS2_PLACEMENT_3D('',#282863,#282864,#282865); +#282863 = CARTESIAN_POINT('',(140.,-75.45,0.)); +#282864 = DIRECTION('',(-0.,-0.,1.)); +#282865 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#282866 = ADVANCED_FACE('',(#282867),#282883,.F.); +#282867 = FACE_BOUND('',#282868,.F.); +#282868 = EDGE_LOOP('',(#282869,#282870,#282876,#282877)); +#282869 = ORIENTED_EDGE('',*,*,#282847,.T.); +#282870 = ORIENTED_EDGE('',*,*,#282871,.T.); +#282871 = EDGE_CURVE('',#282839,#282610,#282872,.T.); +#282872 = LINE('',#282873,#282874); +#282873 = CARTESIAN_POINT('',(140.277164,-75.564805,-3.5E-02)); +#282874 = VECTOR('',#282875,1.); +#282875 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#282876 = ORIENTED_EDGE('',*,*,#282607,.F.); +#282877 = ORIENTED_EDGE('',*,*,#282878,.F.); +#282878 = EDGE_CURVE('',#282848,#282608,#282879,.T.); +#282879 = LINE('',#282880,#282881); +#282880 = CARTESIAN_POINT('',(140.277164,-75.564805,0.)); +#282881 = VECTOR('',#282882,1.); +#282882 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#282883 = PLANE('',#282884); +#282884 = AXIS2_PLACEMENT_3D('',#282885,#282886,#282887); +#282885 = CARTESIAN_POINT('',(140.277164,-75.564805,0.)); +#282886 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#282887 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#282888 = ADVANCED_FACE('',(#282889),#282916,.F.); +#282889 = FACE_BOUND('',#282890,.F.); +#282890 = EDGE_LOOP('',(#282891,#282901,#282908,#282909)); +#282891 = ORIENTED_EDGE('',*,*,#282892,.T.); +#282892 = EDGE_CURVE('',#282893,#282895,#282897,.T.); +#282893 = VERTEX_POINT('',#282894); +#282894 = CARTESIAN_POINT('',(140.137255,-75.45,0.)); +#282895 = VERTEX_POINT('',#282896); +#282896 = CARTESIAN_POINT('',(140.137255,-75.45,-3.5E-02)); +#282897 = LINE('',#282898,#282899); +#282898 = CARTESIAN_POINT('',(140.137255,-75.45,0.)); +#282899 = VECTOR('',#282900,1.); +#282900 = DIRECTION('',(0.,0.,-1.)); +#282901 = ORIENTED_EDGE('',*,*,#282902,.T.); +#282902 = EDGE_CURVE('',#282895,#282895,#282903,.T.); +#282903 = CIRCLE('',#282904,0.137255); +#282904 = AXIS2_PLACEMENT_3D('',#282905,#282906,#282907); +#282905 = CARTESIAN_POINT('',(140.,-75.45,-3.5E-02)); +#282906 = DIRECTION('',(0.,0.,1.)); +#282907 = DIRECTION('',(1.,0.,-0.)); +#282908 = ORIENTED_EDGE('',*,*,#282892,.F.); +#282909 = ORIENTED_EDGE('',*,*,#282910,.F.); +#282910 = EDGE_CURVE('',#282893,#282893,#282911,.T.); +#282911 = CIRCLE('',#282912,0.137255); +#282912 = AXIS2_PLACEMENT_3D('',#282913,#282914,#282915); +#282913 = CARTESIAN_POINT('',(140.,-75.45,0.)); +#282914 = DIRECTION('',(0.,0.,1.)); +#282915 = DIRECTION('',(1.,0.,-0.)); +#282916 = CYLINDRICAL_SURFACE('',#282917,0.137255); +#282917 = AXIS2_PLACEMENT_3D('',#282918,#282919,#282920); +#282918 = CARTESIAN_POINT('',(140.,-75.45,0.)); +#282919 = DIRECTION('',(0.,0.,1.)); +#282920 = DIRECTION('',(1.,0.,-0.)); +#282921 = ADVANCED_FACE('',(#282922,#282933),#282936,.F.); +#282922 = FACE_BOUND('',#282923,.F.); +#282923 = EDGE_LOOP('',(#282924,#282925,#282926,#282927,#282928,#282929, + #282930,#282931,#282932)); +#282924 = ORIENTED_EDGE('',*,*,#282633,.T.); +#282925 = ORIENTED_EDGE('',*,*,#282665,.T.); +#282926 = ORIENTED_EDGE('',*,*,#282697,.T.); +#282927 = ORIENTED_EDGE('',*,*,#282729,.T.); +#282928 = ORIENTED_EDGE('',*,*,#282761,.T.); +#282929 = ORIENTED_EDGE('',*,*,#282792,.T.); +#282930 = ORIENTED_EDGE('',*,*,#282823,.T.); +#282931 = ORIENTED_EDGE('',*,*,#282855,.T.); +#282932 = ORIENTED_EDGE('',*,*,#282878,.T.); +#282933 = FACE_BOUND('',#282934,.F.); +#282934 = EDGE_LOOP('',(#282935)); +#282935 = ORIENTED_EDGE('',*,*,#282910,.T.); +#282936 = PLANE('',#282937); +#282937 = AXIS2_PLACEMENT_3D('',#282938,#282939,#282940); +#282938 = CARTESIAN_POINT('',(0.,0.,0.)); +#282939 = DIRECTION('',(-0.,-0.,-1.)); +#282940 = DIRECTION('',(-1.,0.,0.)); +#282941 = ADVANCED_FACE('',(#282942,#282953),#282956,.T.); +#282942 = FACE_BOUND('',#282943,.T.); +#282943 = EDGE_LOOP('',(#282944,#282945,#282946,#282947,#282948,#282949, + #282950,#282951,#282952)); +#282944 = ORIENTED_EDGE('',*,*,#282617,.T.); +#282945 = ORIENTED_EDGE('',*,*,#282648,.T.); +#282946 = ORIENTED_EDGE('',*,*,#282681,.T.); +#282947 = ORIENTED_EDGE('',*,*,#282712,.T.); +#282948 = ORIENTED_EDGE('',*,*,#282745,.T.); +#282949 = ORIENTED_EDGE('',*,*,#282776,.T.); +#282950 = ORIENTED_EDGE('',*,*,#282807,.T.); +#282951 = ORIENTED_EDGE('',*,*,#282838,.T.); +#282952 = ORIENTED_EDGE('',*,*,#282871,.T.); +#282953 = FACE_BOUND('',#282954,.T.); +#282954 = EDGE_LOOP('',(#282955)); +#282955 = ORIENTED_EDGE('',*,*,#282902,.T.); +#282956 = PLANE('',#282957); +#282957 = AXIS2_PLACEMENT_3D('',#282958,#282959,#282960); +#282958 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#282959 = DIRECTION('',(-0.,-0.,-1.)); +#282960 = DIRECTION('',(-1.,0.,0.)); +#282961 = MANIFOLD_SOLID_BREP('',#282962); +#282962 = CLOSED_SHELL('',(#282963,#283003,#283034,#283065,#283098, + #283129,#283160,#283191,#283222,#283253,#283284,#283317,#283339, + #283372,#283395)); +#282963 = ADVANCED_FACE('',(#282964),#282998,.F.); +#282964 = FACE_BOUND('',#282965,.F.); +#282965 = EDGE_LOOP('',(#282966,#282976,#282984,#282992)); +#282966 = ORIENTED_EDGE('',*,*,#282967,.T.); +#282967 = EDGE_CURVE('',#282968,#282970,#282972,.T.); +#282968 = VERTEX_POINT('',#282969); +#282969 = CARTESIAN_POINT('',(138.321421,-73.38,0.)); +#282970 = VERTEX_POINT('',#282971); +#282971 = CARTESIAN_POINT('',(138.321421,-73.38,-3.5E-02)); +#282972 = LINE('',#282973,#282974); +#282973 = CARTESIAN_POINT('',(138.321421,-73.38,0.)); +#282974 = VECTOR('',#282975,1.); +#282975 = DIRECTION('',(0.,0.,-1.)); +#282976 = ORIENTED_EDGE('',*,*,#282977,.T.); +#282977 = EDGE_CURVE('',#282970,#282978,#282980,.T.); +#282978 = VERTEX_POINT('',#282979); +#282979 = CARTESIAN_POINT('',(140.278578,-73.38,-3.5E-02)); +#282980 = LINE('',#282981,#282982); +#282981 = CARTESIAN_POINT('',(138.321421,-73.38,-3.5E-02)); +#282982 = VECTOR('',#282983,1.); +#282983 = DIRECTION('',(1.,0.,0.)); +#282984 = ORIENTED_EDGE('',*,*,#282985,.F.); +#282985 = EDGE_CURVE('',#282986,#282978,#282988,.T.); +#282986 = VERTEX_POINT('',#282987); +#282987 = CARTESIAN_POINT('',(140.278578,-73.38,0.)); +#282988 = LINE('',#282989,#282990); +#282989 = CARTESIAN_POINT('',(140.278578,-73.38,0.)); +#282990 = VECTOR('',#282991,1.); +#282991 = DIRECTION('',(0.,0.,-1.)); +#282992 = ORIENTED_EDGE('',*,*,#282993,.F.); +#282993 = EDGE_CURVE('',#282968,#282986,#282994,.T.); +#282994 = LINE('',#282995,#282996); +#282995 = CARTESIAN_POINT('',(138.321421,-73.38,0.)); +#282996 = VECTOR('',#282997,1.); +#282997 = DIRECTION('',(1.,0.,0.)); +#282998 = PLANE('',#282999); +#282999 = AXIS2_PLACEMENT_3D('',#283000,#283001,#283002); +#283000 = CARTESIAN_POINT('',(138.321421,-73.38,0.)); +#283001 = DIRECTION('',(0.,-1.,0.)); +#283002 = DIRECTION('',(1.,0.,0.)); +#283003 = ADVANCED_FACE('',(#283004),#283029,.F.); +#283004 = FACE_BOUND('',#283005,.F.); +#283005 = EDGE_LOOP('',(#283006,#283007,#283015,#283023)); +#283006 = ORIENTED_EDGE('',*,*,#282985,.T.); +#283007 = ORIENTED_EDGE('',*,*,#283008,.T.); +#283008 = EDGE_CURVE('',#282978,#283009,#283011,.T.); +#283009 = VERTEX_POINT('',#283010); +#283010 = CARTESIAN_POINT('',(140.630499,-73.028078,-3.5E-02)); +#283011 = LINE('',#283012,#283013); +#283012 = CARTESIAN_POINT('',(140.278578,-73.38,-3.5E-02)); +#283013 = VECTOR('',#283014,1.); +#283014 = DIRECTION('',(0.707105776549,0.707107785823,0.)); +#283015 = ORIENTED_EDGE('',*,*,#283016,.F.); +#283016 = EDGE_CURVE('',#283017,#283009,#283019,.T.); +#283017 = VERTEX_POINT('',#283018); +#283018 = CARTESIAN_POINT('',(140.630499,-73.028078,0.)); +#283019 = LINE('',#283020,#283021); +#283020 = CARTESIAN_POINT('',(140.630499,-73.028078,0.)); +#283021 = VECTOR('',#283022,1.); +#283022 = DIRECTION('',(0.,0.,-1.)); +#283023 = ORIENTED_EDGE('',*,*,#283024,.F.); +#283024 = EDGE_CURVE('',#282986,#283017,#283025,.T.); +#283025 = LINE('',#283026,#283027); +#283026 = CARTESIAN_POINT('',(140.278578,-73.38,0.)); +#283027 = VECTOR('',#283028,1.); +#283028 = DIRECTION('',(0.707105776549,0.707107785823,0.)); +#283029 = PLANE('',#283030); +#283030 = AXIS2_PLACEMENT_3D('',#283031,#283032,#283033); +#283031 = CARTESIAN_POINT('',(140.278578,-73.38,0.)); +#283032 = DIRECTION('',(0.707107785823,-0.707105776549,0.)); +#283033 = DIRECTION('',(0.707105776549,0.707107785823,0.)); +#283034 = ADVANCED_FACE('',(#283035),#283060,.F.); +#283035 = FACE_BOUND('',#283036,.F.); +#283036 = EDGE_LOOP('',(#283037,#283038,#283046,#283054)); +#283037 = ORIENTED_EDGE('',*,*,#283016,.T.); +#283038 = ORIENTED_EDGE('',*,*,#283039,.T.); +#283039 = EDGE_CURVE('',#283009,#283040,#283042,.T.); +#283040 = VERTEX_POINT('',#283041); +#283041 = CARTESIAN_POINT('',(140.622836,-73.014805,-3.5E-02)); +#283042 = LINE('',#283043,#283044); +#283043 = CARTESIAN_POINT('',(140.630499,-73.028078,-3.5E-02)); +#283044 = VECTOR('',#283045,1.); +#283045 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#283046 = ORIENTED_EDGE('',*,*,#283047,.F.); +#283047 = EDGE_CURVE('',#283048,#283040,#283050,.T.); +#283048 = VERTEX_POINT('',#283049); +#283049 = CARTESIAN_POINT('',(140.622836,-73.014805,0.)); +#283050 = LINE('',#283051,#283052); +#283051 = CARTESIAN_POINT('',(140.622836,-73.014805,0.)); +#283052 = VECTOR('',#283053,1.); +#283053 = DIRECTION('',(0.,0.,-1.)); +#283054 = ORIENTED_EDGE('',*,*,#283055,.F.); +#283055 = EDGE_CURVE('',#283017,#283048,#283056,.T.); +#283056 = LINE('',#283057,#283058); +#283057 = CARTESIAN_POINT('',(140.630499,-73.028078,0.)); +#283058 = VECTOR('',#283059,1.); +#283059 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#283060 = PLANE('',#283061); +#283061 = AXIS2_PLACEMENT_3D('',#283062,#283063,#283064); +#283062 = CARTESIAN_POINT('',(140.630499,-73.028078,0.)); +#283063 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#283064 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#283065 = ADVANCED_FACE('',(#283066),#283093,.T.); +#283066 = FACE_BOUND('',#283067,.F.); +#283067 = EDGE_LOOP('',(#283068,#283069,#283078,#283086)); +#283068 = ORIENTED_EDGE('',*,*,#283047,.T.); +#283069 = ORIENTED_EDGE('',*,*,#283070,.T.); +#283070 = EDGE_CURVE('',#283040,#283071,#283073,.T.); +#283071 = VERTEX_POINT('',#283072); +#283072 = CARTESIAN_POINT('',(140.785195,-73.177164,-3.5E-02)); +#283073 = CIRCLE('',#283074,0.299999934501); +#283074 = AXIS2_PLACEMENT_3D('',#283075,#283076,#283077); +#283075 = CARTESIAN_POINT('',(140.8999998594,-72.90000014059,-3.5E-02)); +#283076 = DIRECTION('',(0.,-0.,-1.)); +#283077 = DIRECTION('',(-0.923879733049,-0.382682948224,0.)); +#283078 = ORIENTED_EDGE('',*,*,#283079,.F.); +#283079 = EDGE_CURVE('',#283080,#283071,#283082,.T.); +#283080 = VERTEX_POINT('',#283081); +#283081 = CARTESIAN_POINT('',(140.785195,-73.177164,0.)); +#283082 = LINE('',#283083,#283084); +#283083 = CARTESIAN_POINT('',(140.785195,-73.177164,0.)); +#283084 = VECTOR('',#283085,1.); +#283085 = DIRECTION('',(0.,0.,-1.)); +#283086 = ORIENTED_EDGE('',*,*,#283087,.F.); +#283087 = EDGE_CURVE('',#283048,#283080,#283088,.T.); +#283088 = CIRCLE('',#283089,0.299999934501); +#283089 = AXIS2_PLACEMENT_3D('',#283090,#283091,#283092); +#283090 = CARTESIAN_POINT('',(140.8999998594,-72.90000014059,0.)); +#283091 = DIRECTION('',(0.,-0.,-1.)); +#283092 = DIRECTION('',(-0.923879733049,-0.382682948224,0.)); +#283093 = CYLINDRICAL_SURFACE('',#283094,0.299999934501); +#283094 = AXIS2_PLACEMENT_3D('',#283095,#283096,#283097); +#283095 = CARTESIAN_POINT('',(140.8999998594,-72.90000014059,0.)); +#283096 = DIRECTION('',(-0.,0.,1.)); +#283097 = DIRECTION('',(-0.923879733049,-0.382682948224,0.)); +#283098 = ADVANCED_FACE('',(#283099),#283124,.F.); +#283099 = FACE_BOUND('',#283100,.F.); +#283100 = EDGE_LOOP('',(#283101,#283102,#283110,#283118)); +#283101 = ORIENTED_EDGE('',*,*,#283079,.T.); +#283102 = ORIENTED_EDGE('',*,*,#283103,.T.); +#283103 = EDGE_CURVE('',#283071,#283104,#283106,.T.); +#283104 = VERTEX_POINT('',#283105); +#283105 = CARTESIAN_POINT('',(140.771921,-73.1695,-3.5E-02)); +#283106 = LINE('',#283107,#283108); +#283107 = CARTESIAN_POINT('',(140.785195,-73.177164,-3.5E-02)); +#283108 = VECTOR('',#283109,1.); +#283109 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#283110 = ORIENTED_EDGE('',*,*,#283111,.F.); +#283111 = EDGE_CURVE('',#283112,#283104,#283114,.T.); +#283112 = VERTEX_POINT('',#283113); +#283113 = CARTESIAN_POINT('',(140.771921,-73.1695,0.)); +#283114 = LINE('',#283115,#283116); +#283115 = CARTESIAN_POINT('',(140.771921,-73.1695,0.)); +#283116 = VECTOR('',#283117,1.); +#283117 = DIRECTION('',(0.,0.,-1.)); +#283118 = ORIENTED_EDGE('',*,*,#283119,.F.); +#283119 = EDGE_CURVE('',#283080,#283112,#283120,.T.); +#283120 = LINE('',#283121,#283122); +#283121 = CARTESIAN_POINT('',(140.785195,-73.177164,0.)); +#283122 = VECTOR('',#283123,1.); +#283123 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#283124 = PLANE('',#283125); +#283125 = AXIS2_PLACEMENT_3D('',#283126,#283127,#283128); +#283126 = CARTESIAN_POINT('',(140.785195,-73.177164,0.)); +#283127 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#283128 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#283129 = ADVANCED_FACE('',(#283130),#283155,.F.); +#283130 = FACE_BOUND('',#283131,.F.); +#283131 = EDGE_LOOP('',(#283132,#283133,#283141,#283149)); +#283132 = ORIENTED_EDGE('',*,*,#283111,.T.); +#283133 = ORIENTED_EDGE('',*,*,#283134,.T.); +#283134 = EDGE_CURVE('',#283104,#283135,#283137,.T.); +#283135 = VERTEX_POINT('',#283136); +#283136 = CARTESIAN_POINT('',(140.375557,-73.563147,-3.5E-02)); +#283137 = LINE('',#283138,#283139); +#283138 = CARTESIAN_POINT('',(140.771921,-73.1695,-3.5E-02)); +#283139 = VECTOR('',#283140,1.); +#283140 = DIRECTION('',(-0.709534461418,-0.704670737337,0.)); +#283141 = ORIENTED_EDGE('',*,*,#283142,.F.); +#283142 = EDGE_CURVE('',#283143,#283135,#283145,.T.); +#283143 = VERTEX_POINT('',#283144); +#283144 = CARTESIAN_POINT('',(140.375557,-73.563147,0.)); +#283145 = LINE('',#283146,#283147); +#283146 = CARTESIAN_POINT('',(140.375557,-73.563147,0.)); +#283147 = VECTOR('',#283148,1.); +#283148 = DIRECTION('',(0.,0.,-1.)); +#283149 = ORIENTED_EDGE('',*,*,#283150,.F.); +#283150 = EDGE_CURVE('',#283112,#283143,#283151,.T.); +#283151 = LINE('',#283152,#283153); +#283152 = CARTESIAN_POINT('',(140.771921,-73.1695,0.)); +#283153 = VECTOR('',#283154,1.); +#283154 = DIRECTION('',(-0.709534461418,-0.704670737337,0.)); +#283155 = PLANE('',#283156); +#283156 = AXIS2_PLACEMENT_3D('',#283157,#283158,#283159); +#283157 = CARTESIAN_POINT('',(140.771921,-73.1695,0.)); +#283158 = DIRECTION('',(-0.704670737337,0.709534461418,0.)); +#283159 = DIRECTION('',(-0.709534461418,-0.704670737337,0.)); +#283160 = ADVANCED_FACE('',(#283161),#283186,.F.); +#283161 = FACE_BOUND('',#283162,.F.); +#283162 = EDGE_LOOP('',(#283163,#283164,#283172,#283180)); +#283163 = ORIENTED_EDGE('',*,*,#283142,.T.); +#283164 = ORIENTED_EDGE('',*,*,#283165,.T.); +#283165 = EDGE_CURVE('',#283135,#283166,#283168,.T.); +#283166 = VERTEX_POINT('',#283167); +#283167 = CARTESIAN_POINT('',(140.339509,-73.578079,-3.5E-02)); +#283168 = LINE('',#283169,#283170); +#283169 = CARTESIAN_POINT('',(140.375557,-73.563147,-3.5E-02)); +#283170 = VECTOR('',#283171,1.); +#283171 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#283172 = ORIENTED_EDGE('',*,*,#283173,.F.); +#283173 = EDGE_CURVE('',#283174,#283166,#283176,.T.); +#283174 = VERTEX_POINT('',#283175); +#283175 = CARTESIAN_POINT('',(140.339509,-73.578079,0.)); +#283176 = LINE('',#283177,#283178); +#283177 = CARTESIAN_POINT('',(140.339509,-73.578079,0.)); +#283178 = VECTOR('',#283179,1.); +#283179 = DIRECTION('',(0.,0.,-1.)); +#283180 = ORIENTED_EDGE('',*,*,#283181,.F.); +#283181 = EDGE_CURVE('',#283143,#283174,#283182,.T.); +#283182 = LINE('',#283183,#283184); +#283183 = CARTESIAN_POINT('',(140.375557,-73.563147,0.)); +#283184 = VECTOR('',#283185,1.); +#283185 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#283186 = PLANE('',#283187); +#283187 = AXIS2_PLACEMENT_3D('',#283188,#283189,#283190); +#283188 = CARTESIAN_POINT('',(140.375557,-73.563147,0.)); +#283189 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#283190 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#283191 = ADVANCED_FACE('',(#283192),#283217,.F.); +#283192 = FACE_BOUND('',#283193,.F.); +#283193 = EDGE_LOOP('',(#283194,#283195,#283203,#283211)); +#283194 = ORIENTED_EDGE('',*,*,#283173,.T.); +#283195 = ORIENTED_EDGE('',*,*,#283196,.T.); +#283196 = EDGE_CURVE('',#283166,#283197,#283199,.T.); +#283197 = VERTEX_POINT('',#283198); +#283198 = CARTESIAN_POINT('',(138.260491,-73.578079,-3.5E-02)); +#283199 = LINE('',#283200,#283201); +#283200 = CARTESIAN_POINT('',(140.339509,-73.578079,-3.5E-02)); +#283201 = VECTOR('',#283202,1.); +#283202 = DIRECTION('',(-1.,0.,0.)); +#283203 = ORIENTED_EDGE('',*,*,#283204,.F.); +#283204 = EDGE_CURVE('',#283205,#283197,#283207,.T.); +#283205 = VERTEX_POINT('',#283206); +#283206 = CARTESIAN_POINT('',(138.260491,-73.578079,0.)); +#283207 = LINE('',#283208,#283209); +#283208 = CARTESIAN_POINT('',(138.260491,-73.578079,0.)); +#283209 = VECTOR('',#283210,1.); +#283210 = DIRECTION('',(0.,0.,-1.)); +#283211 = ORIENTED_EDGE('',*,*,#283212,.F.); +#283212 = EDGE_CURVE('',#283174,#283205,#283213,.T.); +#283213 = LINE('',#283214,#283215); +#283214 = CARTESIAN_POINT('',(140.339509,-73.578079,0.)); +#283215 = VECTOR('',#283216,1.); +#283216 = DIRECTION('',(-1.,0.,0.)); +#283217 = PLANE('',#283218); +#283218 = AXIS2_PLACEMENT_3D('',#283219,#283220,#283221); +#283219 = CARTESIAN_POINT('',(140.339509,-73.578079,0.)); +#283220 = DIRECTION('',(0.,1.,0.)); +#283221 = DIRECTION('',(-1.,0.,0.)); +#283222 = ADVANCED_FACE('',(#283223),#283248,.F.); +#283223 = FACE_BOUND('',#283224,.F.); +#283224 = EDGE_LOOP('',(#283225,#283226,#283234,#283242)); +#283225 = ORIENTED_EDGE('',*,*,#283204,.T.); +#283226 = ORIENTED_EDGE('',*,*,#283227,.T.); +#283227 = EDGE_CURVE('',#283197,#283228,#283230,.T.); +#283228 = VERTEX_POINT('',#283229); +#283229 = CARTESIAN_POINT('',(138.224443,-73.563147,-3.5E-02)); +#283230 = LINE('',#283231,#283232); +#283231 = CARTESIAN_POINT('',(138.260491,-73.578079,-3.5E-02)); +#283232 = VECTOR('',#283233,1.); +#283233 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#283234 = ORIENTED_EDGE('',*,*,#283235,.F.); +#283235 = EDGE_CURVE('',#283236,#283228,#283238,.T.); +#283236 = VERTEX_POINT('',#283237); +#283237 = CARTESIAN_POINT('',(138.224443,-73.563147,0.)); +#283238 = LINE('',#283239,#283240); +#283239 = CARTESIAN_POINT('',(138.224443,-73.563147,0.)); +#283240 = VECTOR('',#283241,1.); +#283241 = DIRECTION('',(0.,0.,-1.)); +#283242 = ORIENTED_EDGE('',*,*,#283243,.F.); +#283243 = EDGE_CURVE('',#283205,#283236,#283244,.T.); +#283244 = LINE('',#283245,#283246); +#283245 = CARTESIAN_POINT('',(138.260491,-73.578079,0.)); +#283246 = VECTOR('',#283247,1.); +#283247 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#283248 = PLANE('',#283249); +#283249 = AXIS2_PLACEMENT_3D('',#283250,#283251,#283252); +#283250 = CARTESIAN_POINT('',(138.260491,-73.578079,0.)); +#283251 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#283252 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#283253 = ADVANCED_FACE('',(#283254),#283279,.F.); +#283254 = FACE_BOUND('',#283255,.F.); +#283255 = EDGE_LOOP('',(#283256,#283257,#283265,#283273)); +#283256 = ORIENTED_EDGE('',*,*,#283235,.T.); +#283257 = ORIENTED_EDGE('',*,*,#283258,.T.); +#283258 = EDGE_CURVE('',#283228,#283259,#283261,.T.); +#283259 = VERTEX_POINT('',#283260); +#283260 = CARTESIAN_POINT('',(136.816853,-72.155557,-3.5E-02)); +#283261 = LINE('',#283262,#283263); +#283262 = CARTESIAN_POINT('',(138.224443,-73.563147,-3.5E-02)); +#283263 = VECTOR('',#283264,1.); +#283264 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#283265 = ORIENTED_EDGE('',*,*,#283266,.F.); +#283266 = EDGE_CURVE('',#283267,#283259,#283269,.T.); +#283267 = VERTEX_POINT('',#283268); +#283268 = CARTESIAN_POINT('',(136.816853,-72.155557,0.)); +#283269 = LINE('',#283270,#283271); +#283270 = CARTESIAN_POINT('',(136.816853,-72.155557,0.)); +#283271 = VECTOR('',#283272,1.); +#283272 = DIRECTION('',(0.,0.,-1.)); +#283273 = ORIENTED_EDGE('',*,*,#283274,.F.); +#283274 = EDGE_CURVE('',#283236,#283267,#283275,.T.); +#283275 = LINE('',#283276,#283277); +#283276 = CARTESIAN_POINT('',(138.224443,-73.563147,0.)); +#283277 = VECTOR('',#283278,1.); +#283278 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#283279 = PLANE('',#283280); +#283280 = AXIS2_PLACEMENT_3D('',#283281,#283282,#283283); +#283281 = CARTESIAN_POINT('',(138.224443,-73.563147,0.)); +#283282 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#283283 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#283284 = ADVANCED_FACE('',(#283285),#283312,.T.); +#283285 = FACE_BOUND('',#283286,.F.); +#283286 = EDGE_LOOP('',(#283287,#283288,#283297,#283305)); +#283287 = ORIENTED_EDGE('',*,*,#283266,.T.); +#283288 = ORIENTED_EDGE('',*,*,#283289,.T.); +#283289 = EDGE_CURVE('',#283259,#283290,#283292,.T.); +#283290 = VERTEX_POINT('',#283291); +#283291 = CARTESIAN_POINT('',(136.955557,-72.016853,-3.5E-02)); +#283292 = CIRCLE('',#283293,9.999988522643E-02); +#283293 = AXIS2_PLACEMENT_3D('',#283294,#283295,#283296); +#283294 = CARTESIAN_POINT('',(136.89999951407,-72.09999951407,-3.5E-02) + ); +#283295 = DIRECTION('',(0.,0.,-1.)); +#283296 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#283297 = ORIENTED_EDGE('',*,*,#283298,.F.); +#283298 = EDGE_CURVE('',#283299,#283290,#283301,.T.); +#283299 = VERTEX_POINT('',#283300); +#283300 = CARTESIAN_POINT('',(136.955557,-72.016853,0.)); +#283301 = LINE('',#283302,#283303); +#283302 = CARTESIAN_POINT('',(136.955557,-72.016853,0.)); +#283303 = VECTOR('',#283304,1.); +#283304 = DIRECTION('',(0.,0.,-1.)); +#283305 = ORIENTED_EDGE('',*,*,#283306,.F.); +#283306 = EDGE_CURVE('',#283267,#283299,#283307,.T.); +#283307 = CIRCLE('',#283308,9.999988522643E-02); +#283308 = AXIS2_PLACEMENT_3D('',#283309,#283310,#283311); +#283309 = CARTESIAN_POINT('',(136.89999951407,-72.09999951407,0.)); +#283310 = DIRECTION('',(0.,0.,-1.)); +#283311 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#283312 = CYLINDRICAL_SURFACE('',#283313,9.999988522643E-02); +#283313 = AXIS2_PLACEMENT_3D('',#283314,#283315,#283316); +#283314 = CARTESIAN_POINT('',(136.89999951407,-72.09999951407,0.)); +#283315 = DIRECTION('',(-0.,-0.,1.)); +#283316 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#283317 = ADVANCED_FACE('',(#283318),#283334,.F.); +#283318 = FACE_BOUND('',#283319,.F.); +#283319 = EDGE_LOOP('',(#283320,#283321,#283327,#283328)); +#283320 = ORIENTED_EDGE('',*,*,#283298,.T.); +#283321 = ORIENTED_EDGE('',*,*,#283322,.T.); +#283322 = EDGE_CURVE('',#283290,#282970,#283323,.T.); +#283323 = LINE('',#283324,#283325); +#283324 = CARTESIAN_POINT('',(136.955557,-72.016853,-3.5E-02)); +#283325 = VECTOR('',#283326,1.); +#283326 = DIRECTION('',(0.707810425033,-0.706402436445,0.)); +#283327 = ORIENTED_EDGE('',*,*,#282967,.F.); +#283328 = ORIENTED_EDGE('',*,*,#283329,.F.); +#283329 = EDGE_CURVE('',#283299,#282968,#283330,.T.); +#283330 = LINE('',#283331,#283332); +#283331 = CARTESIAN_POINT('',(136.955557,-72.016853,0.)); +#283332 = VECTOR('',#283333,1.); +#283333 = DIRECTION('',(0.707810425033,-0.706402436445,0.)); +#283334 = PLANE('',#283335); +#283335 = AXIS2_PLACEMENT_3D('',#283336,#283337,#283338); +#283336 = CARTESIAN_POINT('',(136.955557,-72.016853,0.)); +#283337 = DIRECTION('',(-0.706402436445,-0.707810425033,-0.)); +#283338 = DIRECTION('',(0.707810425033,-0.706402436445,0.)); +#283339 = ADVANCED_FACE('',(#283340),#283367,.F.); +#283340 = FACE_BOUND('',#283341,.F.); +#283341 = EDGE_LOOP('',(#283342,#283352,#283359,#283360)); +#283342 = ORIENTED_EDGE('',*,*,#283343,.T.); +#283343 = EDGE_CURVE('',#283344,#283346,#283348,.T.); +#283344 = VERTEX_POINT('',#283345); +#283345 = CARTESIAN_POINT('',(141.037255,-72.9,0.)); +#283346 = VERTEX_POINT('',#283347); +#283347 = CARTESIAN_POINT('',(141.037255,-72.9,-3.5E-02)); +#283348 = LINE('',#283349,#283350); +#283349 = CARTESIAN_POINT('',(141.037255,-72.9,0.)); +#283350 = VECTOR('',#283351,1.); +#283351 = DIRECTION('',(0.,0.,-1.)); +#283352 = ORIENTED_EDGE('',*,*,#283353,.T.); +#283353 = EDGE_CURVE('',#283346,#283346,#283354,.T.); +#283354 = CIRCLE('',#283355,0.137255); +#283355 = AXIS2_PLACEMENT_3D('',#283356,#283357,#283358); +#283356 = CARTESIAN_POINT('',(140.9,-72.9,-3.5E-02)); +#283357 = DIRECTION('',(0.,0.,1.)); +#283358 = DIRECTION('',(1.,0.,-0.)); +#283359 = ORIENTED_EDGE('',*,*,#283343,.F.); +#283360 = ORIENTED_EDGE('',*,*,#283361,.F.); +#283361 = EDGE_CURVE('',#283344,#283344,#283362,.T.); +#283362 = CIRCLE('',#283363,0.137255); +#283363 = AXIS2_PLACEMENT_3D('',#283364,#283365,#283366); +#283364 = CARTESIAN_POINT('',(140.9,-72.9,0.)); +#283365 = DIRECTION('',(0.,0.,1.)); +#283366 = DIRECTION('',(1.,0.,-0.)); +#283367 = CYLINDRICAL_SURFACE('',#283368,0.137255); +#283368 = AXIS2_PLACEMENT_3D('',#283369,#283370,#283371); +#283369 = CARTESIAN_POINT('',(140.9,-72.9,0.)); +#283370 = DIRECTION('',(0.,0.,1.)); +#283371 = DIRECTION('',(1.,0.,-0.)); +#283372 = ADVANCED_FACE('',(#283373,#283387),#283390,.F.); +#283373 = FACE_BOUND('',#283374,.F.); +#283374 = EDGE_LOOP('',(#283375,#283376,#283377,#283378,#283379,#283380, + #283381,#283382,#283383,#283384,#283385,#283386)); +#283375 = ORIENTED_EDGE('',*,*,#282993,.T.); +#283376 = ORIENTED_EDGE('',*,*,#283024,.T.); +#283377 = ORIENTED_EDGE('',*,*,#283055,.T.); +#283378 = ORIENTED_EDGE('',*,*,#283087,.T.); +#283379 = ORIENTED_EDGE('',*,*,#283119,.T.); +#283380 = ORIENTED_EDGE('',*,*,#283150,.T.); +#283381 = ORIENTED_EDGE('',*,*,#283181,.T.); +#283382 = ORIENTED_EDGE('',*,*,#283212,.T.); +#283383 = ORIENTED_EDGE('',*,*,#283243,.T.); +#283384 = ORIENTED_EDGE('',*,*,#283274,.T.); +#283385 = ORIENTED_EDGE('',*,*,#283306,.T.); +#283386 = ORIENTED_EDGE('',*,*,#283329,.T.); +#283387 = FACE_BOUND('',#283388,.F.); +#283388 = EDGE_LOOP('',(#283389)); +#283389 = ORIENTED_EDGE('',*,*,#283361,.T.); +#283390 = PLANE('',#283391); +#283391 = AXIS2_PLACEMENT_3D('',#283392,#283393,#283394); +#283392 = CARTESIAN_POINT('',(0.,0.,0.)); +#283393 = DIRECTION('',(-0.,-0.,-1.)); +#283394 = DIRECTION('',(-1.,0.,0.)); +#283395 = ADVANCED_FACE('',(#283396,#283410),#283413,.T.); +#283396 = FACE_BOUND('',#283397,.T.); +#283397 = EDGE_LOOP('',(#283398,#283399,#283400,#283401,#283402,#283403, + #283404,#283405,#283406,#283407,#283408,#283409)); +#283398 = ORIENTED_EDGE('',*,*,#282977,.T.); +#283399 = ORIENTED_EDGE('',*,*,#283008,.T.); +#283400 = ORIENTED_EDGE('',*,*,#283039,.T.); +#283401 = ORIENTED_EDGE('',*,*,#283070,.T.); +#283402 = ORIENTED_EDGE('',*,*,#283103,.T.); +#283403 = ORIENTED_EDGE('',*,*,#283134,.T.); +#283404 = ORIENTED_EDGE('',*,*,#283165,.T.); +#283405 = ORIENTED_EDGE('',*,*,#283196,.T.); +#283406 = ORIENTED_EDGE('',*,*,#283227,.T.); +#283407 = ORIENTED_EDGE('',*,*,#283258,.T.); +#283408 = ORIENTED_EDGE('',*,*,#283289,.T.); +#283409 = ORIENTED_EDGE('',*,*,#283322,.T.); +#283410 = FACE_BOUND('',#283411,.T.); +#283411 = EDGE_LOOP('',(#283412)); +#283412 = ORIENTED_EDGE('',*,*,#283353,.T.); +#283413 = PLANE('',#283414); +#283414 = AXIS2_PLACEMENT_3D('',#283415,#283416,#283417); +#283415 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#283416 = DIRECTION('',(-0.,-0.,-1.)); +#283417 = DIRECTION('',(-1.,0.,0.)); +#283418 = MANIFOLD_SOLID_BREP('',#283419); +#283419 = CLOSED_SHELL('',(#283420,#283453,#283486,#283498)); +#283420 = ADVANCED_FACE('',(#283421),#283448,.T.); +#283421 = FACE_BOUND('',#283422,.T.); +#283422 = EDGE_LOOP('',(#283423,#283433,#283440,#283441)); +#283423 = ORIENTED_EDGE('',*,*,#283424,.T.); +#283424 = EDGE_CURVE('',#283425,#283427,#283429,.T.); +#283425 = VERTEX_POINT('',#283426); +#283426 = CARTESIAN_POINT('',(131.1,-65.9,0.)); +#283427 = VERTEX_POINT('',#283428); +#283428 = CARTESIAN_POINT('',(131.1,-65.9,-3.5E-02)); +#283429 = LINE('',#283430,#283431); +#283430 = CARTESIAN_POINT('',(131.1,-65.9,0.)); +#283431 = VECTOR('',#283432,1.); +#283432 = DIRECTION('',(0.,0.,-1.)); +#283433 = ORIENTED_EDGE('',*,*,#283434,.T.); +#283434 = EDGE_CURVE('',#283427,#283427,#283435,.T.); +#283435 = CIRCLE('',#283436,0.3); +#283436 = AXIS2_PLACEMENT_3D('',#283437,#283438,#283439); +#283437 = CARTESIAN_POINT('',(130.8,-65.9,-3.5E-02)); +#283438 = DIRECTION('',(0.,0.,1.)); +#283439 = DIRECTION('',(1.,0.,-0.)); +#283440 = ORIENTED_EDGE('',*,*,#283424,.F.); +#283441 = ORIENTED_EDGE('',*,*,#283442,.F.); +#283442 = EDGE_CURVE('',#283425,#283425,#283443,.T.); +#283443 = CIRCLE('',#283444,0.3); +#283444 = AXIS2_PLACEMENT_3D('',#283445,#283446,#283447); +#283445 = CARTESIAN_POINT('',(130.8,-65.9,0.)); +#283446 = DIRECTION('',(0.,0.,1.)); +#283447 = DIRECTION('',(1.,0.,-0.)); +#283448 = CYLINDRICAL_SURFACE('',#283449,0.3); +#283449 = AXIS2_PLACEMENT_3D('',#283450,#283451,#283452); +#283450 = CARTESIAN_POINT('',(130.8,-65.9,0.)); +#283451 = DIRECTION('',(0.,0.,1.)); +#283452 = DIRECTION('',(1.,0.,-0.)); +#283453 = ADVANCED_FACE('',(#283454),#283481,.F.); +#283454 = FACE_BOUND('',#283455,.F.); +#283455 = EDGE_LOOP('',(#283456,#283466,#283473,#283474)); +#283456 = ORIENTED_EDGE('',*,*,#283457,.T.); +#283457 = EDGE_CURVE('',#283458,#283460,#283462,.T.); +#283458 = VERTEX_POINT('',#283459); +#283459 = CARTESIAN_POINT('',(130.937255,-65.9,0.)); +#283460 = VERTEX_POINT('',#283461); +#283461 = CARTESIAN_POINT('',(130.937255,-65.9,-3.5E-02)); +#283462 = LINE('',#283463,#283464); +#283463 = CARTESIAN_POINT('',(130.937255,-65.9,0.)); +#283464 = VECTOR('',#283465,1.); +#283465 = DIRECTION('',(0.,0.,-1.)); +#283466 = ORIENTED_EDGE('',*,*,#283467,.T.); +#283467 = EDGE_CURVE('',#283460,#283460,#283468,.T.); +#283468 = CIRCLE('',#283469,0.137255); +#283469 = AXIS2_PLACEMENT_3D('',#283470,#283471,#283472); +#283470 = CARTESIAN_POINT('',(130.8,-65.9,-3.5E-02)); +#283471 = DIRECTION('',(0.,0.,1.)); +#283472 = DIRECTION('',(1.,0.,-0.)); +#283473 = ORIENTED_EDGE('',*,*,#283457,.F.); +#283474 = ORIENTED_EDGE('',*,*,#283475,.F.); +#283475 = EDGE_CURVE('',#283458,#283458,#283476,.T.); +#283476 = CIRCLE('',#283477,0.137255); +#283477 = AXIS2_PLACEMENT_3D('',#283478,#283479,#283480); +#283478 = CARTESIAN_POINT('',(130.8,-65.9,0.)); +#283479 = DIRECTION('',(0.,0.,1.)); +#283480 = DIRECTION('',(1.,0.,-0.)); +#283481 = CYLINDRICAL_SURFACE('',#283482,0.137255); +#283482 = AXIS2_PLACEMENT_3D('',#283483,#283484,#283485); +#283483 = CARTESIAN_POINT('',(130.8,-65.9,0.)); +#283484 = DIRECTION('',(0.,0.,1.)); +#283485 = DIRECTION('',(1.,0.,-0.)); +#283486 = ADVANCED_FACE('',(#283487,#283490),#283493,.F.); +#283487 = FACE_BOUND('',#283488,.T.); +#283488 = EDGE_LOOP('',(#283489)); +#283489 = ORIENTED_EDGE('',*,*,#283442,.T.); +#283490 = FACE_BOUND('',#283491,.F.); +#283491 = EDGE_LOOP('',(#283492)); +#283492 = ORIENTED_EDGE('',*,*,#283475,.T.); +#283493 = PLANE('',#283494); +#283494 = AXIS2_PLACEMENT_3D('',#283495,#283496,#283497); +#283495 = CARTESIAN_POINT('',(0.,0.,0.)); +#283496 = DIRECTION('',(-0.,-0.,-1.)); +#283497 = DIRECTION('',(-1.,0.,0.)); +#283498 = ADVANCED_FACE('',(#283499,#283502),#283505,.T.); +#283499 = FACE_BOUND('',#283500,.F.); +#283500 = EDGE_LOOP('',(#283501)); +#283501 = ORIENTED_EDGE('',*,*,#283434,.T.); +#283502 = FACE_BOUND('',#283503,.T.); +#283503 = EDGE_LOOP('',(#283504)); +#283504 = ORIENTED_EDGE('',*,*,#283467,.T.); +#283505 = PLANE('',#283506); +#283506 = AXIS2_PLACEMENT_3D('',#283507,#283508,#283509); +#283507 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#283508 = DIRECTION('',(-0.,-0.,-1.)); +#283509 = DIRECTION('',(-1.,0.,0.)); +#283510 = MANIFOLD_SOLID_BREP('',#283511); +#283511 = CLOSED_SHELL('',(#283512,#283552,#283583,#283614,#283645, + #283676,#283709,#283740,#283771,#283804,#283835,#283866,#283897, + #283928,#283961,#283983,#284016,#284042)); +#283512 = ADVANCED_FACE('',(#283513),#283547,.T.); +#283513 = FACE_BOUND('',#283514,.T.); +#283514 = EDGE_LOOP('',(#283515,#283525,#283533,#283541)); +#283515 = ORIENTED_EDGE('',*,*,#283516,.T.); +#283516 = EDGE_CURVE('',#283517,#283519,#283521,.T.); +#283517 = VERTEX_POINT('',#283518); +#283518 = CARTESIAN_POINT('',(133.118869,-80.5,1.51)); +#283519 = VERTEX_POINT('',#283520); +#283520 = CARTESIAN_POINT('',(133.118869,-80.5,1.545)); +#283521 = LINE('',#283522,#283523); +#283522 = CARTESIAN_POINT('',(133.118869,-80.5,1.51)); +#283523 = VECTOR('',#283524,1.); +#283524 = DIRECTION('',(0.,0.,1.)); +#283525 = ORIENTED_EDGE('',*,*,#283526,.T.); +#283526 = EDGE_CURVE('',#283519,#283527,#283529,.T.); +#283527 = VERTEX_POINT('',#283528); +#283528 = CARTESIAN_POINT('',(132.541421,-80.5,1.545)); +#283529 = LINE('',#283530,#283531); +#283530 = CARTESIAN_POINT('',(133.118869,-80.5,1.545)); +#283531 = VECTOR('',#283532,1.); +#283532 = DIRECTION('',(-1.,0.,0.)); +#283533 = ORIENTED_EDGE('',*,*,#283534,.F.); +#283534 = EDGE_CURVE('',#283535,#283527,#283537,.T.); +#283535 = VERTEX_POINT('',#283536); +#283536 = CARTESIAN_POINT('',(132.541421,-80.5,1.51)); +#283537 = LINE('',#283538,#283539); +#283538 = CARTESIAN_POINT('',(132.541421,-80.5,1.51)); +#283539 = VECTOR('',#283540,1.); +#283540 = DIRECTION('',(0.,0.,1.)); +#283541 = ORIENTED_EDGE('',*,*,#283542,.F.); +#283542 = EDGE_CURVE('',#283517,#283535,#283543,.T.); +#283543 = LINE('',#283544,#283545); +#283544 = CARTESIAN_POINT('',(133.118869,-80.5,1.51)); +#283545 = VECTOR('',#283546,1.); +#283546 = DIRECTION('',(-1.,0.,0.)); +#283547 = PLANE('',#283548); +#283548 = AXIS2_PLACEMENT_3D('',#283549,#283550,#283551); +#283549 = CARTESIAN_POINT('',(133.118869,-80.5,1.51)); +#283550 = DIRECTION('',(0.,-1.,0.)); +#283551 = DIRECTION('',(-1.,0.,0.)); +#283552 = ADVANCED_FACE('',(#283553),#283578,.T.); +#283553 = FACE_BOUND('',#283554,.T.); +#283554 = EDGE_LOOP('',(#283555,#283556,#283564,#283572)); +#283555 = ORIENTED_EDGE('',*,*,#283534,.T.); +#283556 = ORIENTED_EDGE('',*,*,#283557,.T.); +#283557 = EDGE_CURVE('',#283527,#283558,#283560,.T.); +#283558 = VERTEX_POINT('',#283559); +#283559 = CARTESIAN_POINT('',(132.291421,-80.749999,1.545)); +#283560 = LINE('',#283561,#283562); +#283561 = CARTESIAN_POINT('',(132.541421,-80.5,1.545)); +#283562 = VECTOR('',#283563,1.); +#283563 = DIRECTION('',(-0.707108195402,-0.707105366969,0.)); +#283564 = ORIENTED_EDGE('',*,*,#283565,.F.); +#283565 = EDGE_CURVE('',#283566,#283558,#283568,.T.); +#283566 = VERTEX_POINT('',#283567); +#283567 = CARTESIAN_POINT('',(132.291421,-80.749999,1.51)); +#283568 = LINE('',#283569,#283570); +#283569 = CARTESIAN_POINT('',(132.291421,-80.749999,1.51)); +#283570 = VECTOR('',#283571,1.); +#283571 = DIRECTION('',(0.,0.,1.)); +#283572 = ORIENTED_EDGE('',*,*,#283573,.F.); +#283573 = EDGE_CURVE('',#283535,#283566,#283574,.T.); +#283574 = LINE('',#283575,#283576); +#283575 = CARTESIAN_POINT('',(132.541421,-80.5,1.51)); +#283576 = VECTOR('',#283577,1.); +#283577 = DIRECTION('',(-0.707108195402,-0.707105366969,0.)); +#283578 = PLANE('',#283579); +#283579 = AXIS2_PLACEMENT_3D('',#283580,#283581,#283582); +#283580 = CARTESIAN_POINT('',(132.541421,-80.5,1.51)); +#283581 = DIRECTION('',(0.707105366969,-0.707108195402,0.)); +#283582 = DIRECTION('',(-0.707108195402,-0.707105366969,0.)); +#283583 = ADVANCED_FACE('',(#283584),#283609,.T.); +#283584 = FACE_BOUND('',#283585,.T.); +#283585 = EDGE_LOOP('',(#283586,#283587,#283595,#283603)); +#283586 = ORIENTED_EDGE('',*,*,#283565,.T.); +#283587 = ORIENTED_EDGE('',*,*,#283588,.T.); +#283588 = EDGE_CURVE('',#283558,#283589,#283591,.T.); +#283589 = VERTEX_POINT('',#283590); +#283590 = CARTESIAN_POINT('',(132.368147,-80.829443,1.545)); +#283591 = LINE('',#283592,#283593); +#283592 = CARTESIAN_POINT('',(132.291421,-80.749999,1.545)); +#283593 = VECTOR('',#283594,1.); +#283594 = DIRECTION('',(0.694695011683,-0.719304414516,0.)); +#283595 = ORIENTED_EDGE('',*,*,#283596,.F.); +#283596 = EDGE_CURVE('',#283597,#283589,#283599,.T.); +#283597 = VERTEX_POINT('',#283598); +#283598 = CARTESIAN_POINT('',(132.368147,-80.829443,1.51)); +#283599 = LINE('',#283600,#283601); +#283600 = CARTESIAN_POINT('',(132.368147,-80.829443,1.51)); +#283601 = VECTOR('',#283602,1.); +#283602 = DIRECTION('',(0.,0.,1.)); +#283603 = ORIENTED_EDGE('',*,*,#283604,.F.); +#283604 = EDGE_CURVE('',#283566,#283597,#283605,.T.); +#283605 = LINE('',#283606,#283607); +#283606 = CARTESIAN_POINT('',(132.291421,-80.749999,1.51)); +#283607 = VECTOR('',#283608,1.); +#283608 = DIRECTION('',(0.694695011683,-0.719304414516,0.)); +#283609 = PLANE('',#283610); +#283610 = AXIS2_PLACEMENT_3D('',#283611,#283612,#283613); +#283611 = CARTESIAN_POINT('',(132.291421,-80.749999,1.51)); +#283612 = DIRECTION('',(0.719304414516,0.694695011683,-0.)); +#283613 = DIRECTION('',(0.694695011683,-0.719304414516,0.)); +#283614 = ADVANCED_FACE('',(#283615),#283640,.T.); +#283615 = FACE_BOUND('',#283616,.T.); +#283616 = EDGE_LOOP('',(#283617,#283618,#283626,#283634)); +#283617 = ORIENTED_EDGE('',*,*,#283596,.T.); +#283618 = ORIENTED_EDGE('',*,*,#283619,.T.); +#283619 = EDGE_CURVE('',#283589,#283620,#283622,.T.); +#283620 = VERTEX_POINT('',#283621); +#283621 = CARTESIAN_POINT('',(132.383079,-80.865491,1.545)); +#283622 = LINE('',#283623,#283624); +#283623 = CARTESIAN_POINT('',(132.368147,-80.829443,1.545)); +#283624 = VECTOR('',#283625,1.); +#283625 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#283626 = ORIENTED_EDGE('',*,*,#283627,.F.); +#283627 = EDGE_CURVE('',#283628,#283620,#283630,.T.); +#283628 = VERTEX_POINT('',#283629); +#283629 = CARTESIAN_POINT('',(132.383079,-80.865491,1.51)); +#283630 = LINE('',#283631,#283632); +#283631 = CARTESIAN_POINT('',(132.383079,-80.865491,1.51)); +#283632 = VECTOR('',#283633,1.); +#283633 = DIRECTION('',(0.,0.,1.)); +#283634 = ORIENTED_EDGE('',*,*,#283635,.F.); +#283635 = EDGE_CURVE('',#283597,#283628,#283636,.T.); +#283636 = LINE('',#283637,#283638); +#283637 = CARTESIAN_POINT('',(132.368147,-80.829443,1.51)); +#283638 = VECTOR('',#283639,1.); +#283639 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#283640 = PLANE('',#283641); +#283641 = AXIS2_PLACEMENT_3D('',#283642,#283643,#283644); +#283642 = CARTESIAN_POINT('',(132.368147,-80.829443,1.51)); +#283643 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#283644 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#283645 = ADVANCED_FACE('',(#283646),#283671,.T.); +#283646 = FACE_BOUND('',#283647,.T.); +#283647 = EDGE_LOOP('',(#283648,#283649,#283657,#283665)); +#283648 = ORIENTED_EDGE('',*,*,#283627,.T.); +#283649 = ORIENTED_EDGE('',*,*,#283650,.T.); +#283650 = EDGE_CURVE('',#283620,#283651,#283653,.T.); +#283651 = VERTEX_POINT('',#283652); +#283652 = CARTESIAN_POINT('',(132.383079,-82.429509,1.545)); +#283653 = LINE('',#283654,#283655); +#283654 = CARTESIAN_POINT('',(132.383079,-80.865491,1.545)); +#283655 = VECTOR('',#283656,1.); +#283656 = DIRECTION('',(0.,-1.,0.)); +#283657 = ORIENTED_EDGE('',*,*,#283658,.F.); +#283658 = EDGE_CURVE('',#283659,#283651,#283661,.T.); +#283659 = VERTEX_POINT('',#283660); +#283660 = CARTESIAN_POINT('',(132.383079,-82.429509,1.51)); +#283661 = LINE('',#283662,#283663); +#283662 = CARTESIAN_POINT('',(132.383079,-82.429509,1.51)); +#283663 = VECTOR('',#283664,1.); +#283664 = DIRECTION('',(0.,0.,1.)); +#283665 = ORIENTED_EDGE('',*,*,#283666,.F.); +#283666 = EDGE_CURVE('',#283628,#283659,#283667,.T.); +#283667 = LINE('',#283668,#283669); +#283668 = CARTESIAN_POINT('',(132.383079,-80.865491,1.51)); +#283669 = VECTOR('',#283670,1.); +#283670 = DIRECTION('',(0.,-1.,0.)); +#283671 = PLANE('',#283672); +#283672 = AXIS2_PLACEMENT_3D('',#283673,#283674,#283675); +#283673 = CARTESIAN_POINT('',(132.383079,-80.865491,1.51)); +#283674 = DIRECTION('',(1.,0.,-0.)); +#283675 = DIRECTION('',(0.,-1.,0.)); +#283676 = ADVANCED_FACE('',(#283677),#283704,.T.); +#283677 = FACE_BOUND('',#283678,.T.); +#283678 = EDGE_LOOP('',(#283679,#283680,#283689,#283697)); +#283679 = ORIENTED_EDGE('',*,*,#283658,.T.); +#283680 = ORIENTED_EDGE('',*,*,#283681,.T.); +#283681 = EDGE_CURVE('',#283651,#283682,#283684,.T.); +#283682 = VERTEX_POINT('',#283683); +#283683 = CARTESIAN_POINT('',(132.186921,-82.429509,1.545)); +#283684 = CIRCLE('',#283685,0.100000456609); +#283685 = AXIS2_PLACEMENT_3D('',#283686,#283687,#283688); +#283686 = CARTESIAN_POINT('',(132.285,-82.41,1.545)); +#283687 = DIRECTION('',(-0.,0.,-1.)); +#283688 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#283689 = ORIENTED_EDGE('',*,*,#283690,.F.); +#283690 = EDGE_CURVE('',#283691,#283682,#283693,.T.); +#283691 = VERTEX_POINT('',#283692); +#283692 = CARTESIAN_POINT('',(132.186921,-82.429509,1.51)); +#283693 = LINE('',#283694,#283695); +#283694 = CARTESIAN_POINT('',(132.186921,-82.429509,1.51)); +#283695 = VECTOR('',#283696,1.); +#283696 = DIRECTION('',(0.,0.,1.)); +#283697 = ORIENTED_EDGE('',*,*,#283698,.F.); +#283698 = EDGE_CURVE('',#283659,#283691,#283699,.T.); +#283699 = CIRCLE('',#283700,0.100000456609); +#283700 = AXIS2_PLACEMENT_3D('',#283701,#283702,#283703); +#283701 = CARTESIAN_POINT('',(132.285,-82.41,1.51)); +#283702 = DIRECTION('',(-0.,0.,-1.)); +#283703 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#283704 = CYLINDRICAL_SURFACE('',#283705,0.100000456609); +#283705 = AXIS2_PLACEMENT_3D('',#283706,#283707,#283708); +#283706 = CARTESIAN_POINT('',(132.285,-82.41,1.51)); +#283707 = DIRECTION('',(-0.,0.,-1.)); +#283708 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#283709 = ADVANCED_FACE('',(#283710),#283735,.T.); +#283710 = FACE_BOUND('',#283711,.T.); +#283711 = EDGE_LOOP('',(#283712,#283713,#283721,#283729)); +#283712 = ORIENTED_EDGE('',*,*,#283690,.T.); +#283713 = ORIENTED_EDGE('',*,*,#283714,.T.); +#283714 = EDGE_CURVE('',#283682,#283715,#283717,.T.); +#283715 = VERTEX_POINT('',#283716); +#283716 = CARTESIAN_POINT('',(132.185,-80.926422,1.545)); +#283717 = LINE('',#283718,#283719); +#283718 = CARTESIAN_POINT('',(132.186921,-82.429509,1.545)); +#283719 = VECTOR('',#283720,1.); +#283720 = DIRECTION('',(-1.278035423866E-03,0.999999183312,0.)); +#283721 = ORIENTED_EDGE('',*,*,#283722,.F.); +#283722 = EDGE_CURVE('',#283723,#283715,#283725,.T.); +#283723 = VERTEX_POINT('',#283724); +#283724 = CARTESIAN_POINT('',(132.185,-80.926422,1.51)); +#283725 = LINE('',#283726,#283727); +#283726 = CARTESIAN_POINT('',(132.185,-80.926422,1.51)); +#283727 = VECTOR('',#283728,1.); +#283728 = DIRECTION('',(0.,0.,1.)); +#283729 = ORIENTED_EDGE('',*,*,#283730,.F.); +#283730 = EDGE_CURVE('',#283691,#283723,#283731,.T.); +#283731 = LINE('',#283732,#283733); +#283732 = CARTESIAN_POINT('',(132.186921,-82.429509,1.51)); +#283733 = VECTOR('',#283734,1.); +#283734 = DIRECTION('',(-1.278035423866E-03,0.999999183312,0.)); +#283735 = PLANE('',#283736); +#283736 = AXIS2_PLACEMENT_3D('',#283737,#283738,#283739); +#283737 = CARTESIAN_POINT('',(132.186921,-82.429509,1.51)); +#283738 = DIRECTION('',(-0.999999183312,-1.278035423866E-03,0.)); +#283739 = DIRECTION('',(-1.278035423866E-03,0.999999183312,0.)); +#283740 = ADVANCED_FACE('',(#283741),#283766,.T.); +#283741 = FACE_BOUND('',#283742,.T.); +#283742 = EDGE_LOOP('',(#283743,#283744,#283752,#283760)); +#283743 = ORIENTED_EDGE('',*,*,#283722,.T.); +#283744 = ORIENTED_EDGE('',*,*,#283745,.T.); +#283745 = EDGE_CURVE('',#283715,#283746,#283748,.T.); +#283746 = VERTEX_POINT('',#283747); +#283747 = CARTESIAN_POINT('',(132.066853,-80.805557,1.545)); +#283748 = LINE('',#283749,#283750); +#283749 = CARTESIAN_POINT('',(132.185,-80.926422,1.545)); +#283750 = VECTOR('',#283751,1.); +#283751 = DIRECTION('',(-0.699020497857,0.715101631641,0.)); +#283752 = ORIENTED_EDGE('',*,*,#283753,.F.); +#283753 = EDGE_CURVE('',#283754,#283746,#283756,.T.); +#283754 = VERTEX_POINT('',#283755); +#283755 = CARTESIAN_POINT('',(132.066853,-80.805557,1.51)); +#283756 = LINE('',#283757,#283758); +#283757 = CARTESIAN_POINT('',(132.066853,-80.805557,1.51)); +#283758 = VECTOR('',#283759,1.); +#283759 = DIRECTION('',(0.,0.,1.)); +#283760 = ORIENTED_EDGE('',*,*,#283761,.F.); +#283761 = EDGE_CURVE('',#283723,#283754,#283762,.T.); +#283762 = LINE('',#283763,#283764); +#283763 = CARTESIAN_POINT('',(132.185,-80.926422,1.51)); +#283764 = VECTOR('',#283765,1.); +#283765 = DIRECTION('',(-0.699020497857,0.715101631641,0.)); +#283766 = PLANE('',#283767); +#283767 = AXIS2_PLACEMENT_3D('',#283768,#283769,#283770); +#283768 = CARTESIAN_POINT('',(132.185,-80.926422,1.51)); +#283769 = DIRECTION('',(-0.715101631641,-0.699020497857,0.)); +#283770 = DIRECTION('',(-0.699020497857,0.715101631641,0.)); +#283771 = ADVANCED_FACE('',(#283772),#283799,.T.); +#283772 = FACE_BOUND('',#283773,.T.); +#283773 = EDGE_LOOP('',(#283774,#283775,#283784,#283792)); +#283774 = ORIENTED_EDGE('',*,*,#283753,.T.); +#283775 = ORIENTED_EDGE('',*,*,#283776,.T.); +#283776 = EDGE_CURVE('',#283746,#283777,#283779,.T.); +#283777 = VERTEX_POINT('',#283778); +#283778 = CARTESIAN_POINT('',(132.066853,-80.694443,1.545)); +#283779 = CIRCLE('',#283780,9.999758414113E-02); +#283780 = AXIS2_PLACEMENT_3D('',#283781,#283782,#283783); +#283781 = CARTESIAN_POINT('',(132.14999707125,-80.75,1.545)); +#283782 = DIRECTION('',(0.,0.,-1.)); +#283783 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#283784 = ORIENTED_EDGE('',*,*,#283785,.F.); +#283785 = EDGE_CURVE('',#283786,#283777,#283788,.T.); +#283786 = VERTEX_POINT('',#283787); +#283787 = CARTESIAN_POINT('',(132.066853,-80.694443,1.51)); +#283788 = LINE('',#283789,#283790); +#283789 = CARTESIAN_POINT('',(132.066853,-80.694443,1.51)); +#283790 = VECTOR('',#283791,1.); +#283791 = DIRECTION('',(0.,0.,1.)); +#283792 = ORIENTED_EDGE('',*,*,#283793,.F.); +#283793 = EDGE_CURVE('',#283754,#283786,#283794,.T.); +#283794 = CIRCLE('',#283795,9.999758414113E-02); +#283795 = AXIS2_PLACEMENT_3D('',#283796,#283797,#283798); +#283796 = CARTESIAN_POINT('',(132.14999707125,-80.75,1.51)); +#283797 = DIRECTION('',(0.,0.,-1.)); +#283798 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#283799 = CYLINDRICAL_SURFACE('',#283800,9.999758414113E-02); +#283800 = AXIS2_PLACEMENT_3D('',#283801,#283802,#283803); +#283801 = CARTESIAN_POINT('',(132.14999707125,-80.75,1.51)); +#283802 = DIRECTION('',(0.,0.,-1.)); +#283803 = DIRECTION('',(-0.831460799482,-0.555583422111,-0.)); +#283804 = ADVANCED_FACE('',(#283805),#283830,.T.); +#283805 = FACE_BOUND('',#283806,.T.); +#283806 = EDGE_LOOP('',(#283807,#283808,#283816,#283824)); +#283807 = ORIENTED_EDGE('',*,*,#283785,.T.); +#283808 = ORIENTED_EDGE('',*,*,#283809,.T.); +#283809 = EDGE_CURVE('',#283777,#283810,#283812,.T.); +#283810 = VERTEX_POINT('',#283811); +#283811 = CARTESIAN_POINT('',(132.444443,-80.316853,1.545)); +#283812 = LINE('',#283813,#283814); +#283813 = CARTESIAN_POINT('',(132.066853,-80.694443,1.545)); +#283814 = VECTOR('',#283815,1.); +#283815 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#283816 = ORIENTED_EDGE('',*,*,#283817,.F.); +#283817 = EDGE_CURVE('',#283818,#283810,#283820,.T.); +#283818 = VERTEX_POINT('',#283819); +#283819 = CARTESIAN_POINT('',(132.444443,-80.316853,1.51)); +#283820 = LINE('',#283821,#283822); +#283821 = CARTESIAN_POINT('',(132.444443,-80.316853,1.51)); +#283822 = VECTOR('',#283823,1.); +#283823 = DIRECTION('',(0.,0.,1.)); +#283824 = ORIENTED_EDGE('',*,*,#283825,.F.); +#283825 = EDGE_CURVE('',#283786,#283818,#283826,.T.); +#283826 = LINE('',#283827,#283828); +#283827 = CARTESIAN_POINT('',(132.066853,-80.694443,1.51)); +#283828 = VECTOR('',#283829,1.); +#283829 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#283830 = PLANE('',#283831); +#283831 = AXIS2_PLACEMENT_3D('',#283832,#283833,#283834); +#283832 = CARTESIAN_POINT('',(132.066853,-80.694443,1.51)); +#283833 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#283834 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#283835 = ADVANCED_FACE('',(#283836),#283861,.T.); +#283836 = FACE_BOUND('',#283837,.T.); +#283837 = EDGE_LOOP('',(#283838,#283839,#283847,#283855)); +#283838 = ORIENTED_EDGE('',*,*,#283817,.T.); +#283839 = ORIENTED_EDGE('',*,*,#283840,.T.); +#283840 = EDGE_CURVE('',#283810,#283841,#283843,.T.); +#283841 = VERTEX_POINT('',#283842); +#283842 = CARTESIAN_POINT('',(132.480491,-80.301921,1.545)); +#283843 = LINE('',#283844,#283845); +#283844 = CARTESIAN_POINT('',(132.444443,-80.316853,1.545)); +#283845 = VECTOR('',#283846,1.); +#283846 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#283847 = ORIENTED_EDGE('',*,*,#283848,.F.); +#283848 = EDGE_CURVE('',#283849,#283841,#283851,.T.); +#283849 = VERTEX_POINT('',#283850); +#283850 = CARTESIAN_POINT('',(132.480491,-80.301921,1.51)); +#283851 = LINE('',#283852,#283853); +#283852 = CARTESIAN_POINT('',(132.480491,-80.301921,1.51)); +#283853 = VECTOR('',#283854,1.); +#283854 = DIRECTION('',(0.,0.,1.)); +#283855 = ORIENTED_EDGE('',*,*,#283856,.F.); +#283856 = EDGE_CURVE('',#283818,#283849,#283857,.T.); +#283857 = LINE('',#283858,#283859); +#283858 = CARTESIAN_POINT('',(132.444443,-80.316853,1.51)); +#283859 = VECTOR('',#283860,1.); +#283860 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#283861 = PLANE('',#283862); +#283862 = AXIS2_PLACEMENT_3D('',#283863,#283864,#283865); +#283863 = CARTESIAN_POINT('',(132.444443,-80.316853,1.51)); +#283864 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#283865 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#283866 = ADVANCED_FACE('',(#283867),#283892,.T.); +#283867 = FACE_BOUND('',#283868,.T.); +#283868 = EDGE_LOOP('',(#283869,#283870,#283878,#283886)); +#283869 = ORIENTED_EDGE('',*,*,#283848,.T.); +#283870 = ORIENTED_EDGE('',*,*,#283871,.T.); +#283871 = EDGE_CURVE('',#283841,#283872,#283874,.T.); +#283872 = VERTEX_POINT('',#283873); +#283873 = CARTESIAN_POINT('',(133.118869,-80.3,1.545)); +#283874 = LINE('',#283875,#283876); +#283875 = CARTESIAN_POINT('',(132.480491,-80.301921,1.545)); +#283876 = VECTOR('',#283877,1.); +#283877 = DIRECTION('',(0.999995472422,3.009175288807E-03,0.)); +#283878 = ORIENTED_EDGE('',*,*,#283879,.F.); +#283879 = EDGE_CURVE('',#283880,#283872,#283882,.T.); +#283880 = VERTEX_POINT('',#283881); +#283881 = CARTESIAN_POINT('',(133.118869,-80.3,1.51)); +#283882 = LINE('',#283883,#283884); +#283883 = CARTESIAN_POINT('',(133.118869,-80.3,1.51)); +#283884 = VECTOR('',#283885,1.); +#283885 = DIRECTION('',(0.,0.,1.)); +#283886 = ORIENTED_EDGE('',*,*,#283887,.F.); +#283887 = EDGE_CURVE('',#283849,#283880,#283888,.T.); +#283888 = LINE('',#283889,#283890); +#283889 = CARTESIAN_POINT('',(132.480491,-80.301921,1.51)); +#283890 = VECTOR('',#283891,1.); +#283891 = DIRECTION('',(0.999995472422,3.009175288807E-03,0.)); +#283892 = PLANE('',#283893); +#283893 = AXIS2_PLACEMENT_3D('',#283894,#283895,#283896); +#283894 = CARTESIAN_POINT('',(132.480491,-80.301921,1.51)); +#283895 = DIRECTION('',(-3.009175288807E-03,0.999995472422,0.)); +#283896 = DIRECTION('',(0.999995472422,3.009175288807E-03,0.)); +#283897 = ADVANCED_FACE('',(#283898),#283923,.T.); +#283898 = FACE_BOUND('',#283899,.T.); +#283899 = EDGE_LOOP('',(#283900,#283901,#283909,#283917)); +#283900 = ORIENTED_EDGE('',*,*,#283879,.T.); +#283901 = ORIENTED_EDGE('',*,*,#283902,.T.); +#283902 = EDGE_CURVE('',#283872,#283903,#283905,.T.); +#283903 = VERTEX_POINT('',#283904); +#283904 = CARTESIAN_POINT('',(133.122836,-80.285195,1.545)); +#283905 = LINE('',#283906,#283907); +#283906 = CARTESIAN_POINT('',(133.118869,-80.3,1.545)); +#283907 = VECTOR('',#283908,1.); +#283908 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#283909 = ORIENTED_EDGE('',*,*,#283910,.F.); +#283910 = EDGE_CURVE('',#283911,#283903,#283913,.T.); +#283911 = VERTEX_POINT('',#283912); +#283912 = CARTESIAN_POINT('',(133.122836,-80.285195,1.51)); +#283913 = LINE('',#283914,#283915); +#283914 = CARTESIAN_POINT('',(133.122836,-80.285195,1.51)); +#283915 = VECTOR('',#283916,1.); +#283916 = DIRECTION('',(0.,0.,1.)); +#283917 = ORIENTED_EDGE('',*,*,#283918,.F.); +#283918 = EDGE_CURVE('',#283880,#283911,#283919,.T.); +#283919 = LINE('',#283920,#283921); +#283920 = CARTESIAN_POINT('',(133.118869,-80.3,1.51)); +#283921 = VECTOR('',#283922,1.); +#283922 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#283923 = PLANE('',#283924); +#283924 = AXIS2_PLACEMENT_3D('',#283925,#283926,#283927); +#283925 = CARTESIAN_POINT('',(133.118869,-80.3,1.51)); +#283926 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#283927 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#283928 = ADVANCED_FACE('',(#283929),#283956,.T.); +#283929 = FACE_BOUND('',#283930,.T.); +#283930 = EDGE_LOOP('',(#283931,#283932,#283941,#283949)); +#283931 = ORIENTED_EDGE('',*,*,#283910,.T.); +#283932 = ORIENTED_EDGE('',*,*,#283933,.T.); +#283933 = EDGE_CURVE('',#283903,#283934,#283936,.T.); +#283934 = VERTEX_POINT('',#283935); +#283935 = CARTESIAN_POINT('',(133.122836,-80.514805,1.545)); +#283936 = CIRCLE('',#283937,0.299997422619); +#283937 = AXIS2_PLACEMENT_3D('',#283938,#283939,#283940); +#283938 = CARTESIAN_POINT('',(133.39999708232,-80.4,1.545)); +#283939 = DIRECTION('',(0.,0.,-1.)); +#283940 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#283941 = ORIENTED_EDGE('',*,*,#283942,.F.); +#283942 = EDGE_CURVE('',#283943,#283934,#283945,.T.); +#283943 = VERTEX_POINT('',#283944); +#283944 = CARTESIAN_POINT('',(133.122836,-80.514805,1.51)); +#283945 = LINE('',#283946,#283947); +#283946 = CARTESIAN_POINT('',(133.122836,-80.514805,1.51)); +#283947 = VECTOR('',#283948,1.); +#283948 = DIRECTION('',(0.,0.,1.)); +#283949 = ORIENTED_EDGE('',*,*,#283950,.F.); +#283950 = EDGE_CURVE('',#283911,#283943,#283951,.T.); +#283951 = CIRCLE('',#283952,0.299997422619); +#283952 = AXIS2_PLACEMENT_3D('',#283953,#283954,#283955); +#283953 = CARTESIAN_POINT('',(133.39999708232,-80.4,1.51)); +#283954 = DIRECTION('',(0.,0.,-1.)); +#283955 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#283956 = CYLINDRICAL_SURFACE('',#283957,0.299997422619); +#283957 = AXIS2_PLACEMENT_3D('',#283958,#283959,#283960); +#283958 = CARTESIAN_POINT('',(133.39999708232,-80.4,1.51)); +#283959 = DIRECTION('',(0.,0.,-1.)); +#283960 = DIRECTION('',(-0.923878211689,0.382686621097,-0.)); +#283961 = ADVANCED_FACE('',(#283962),#283978,.T.); +#283962 = FACE_BOUND('',#283963,.T.); +#283963 = EDGE_LOOP('',(#283964,#283965,#283971,#283972)); +#283964 = ORIENTED_EDGE('',*,*,#283942,.T.); +#283965 = ORIENTED_EDGE('',*,*,#283966,.T.); +#283966 = EDGE_CURVE('',#283934,#283519,#283967,.T.); +#283967 = LINE('',#283968,#283969); +#283968 = CARTESIAN_POINT('',(133.122836,-80.514805,1.545)); +#283969 = VECTOR('',#283970,1.); +#283970 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#283971 = ORIENTED_EDGE('',*,*,#283516,.F.); +#283972 = ORIENTED_EDGE('',*,*,#283973,.F.); +#283973 = EDGE_CURVE('',#283943,#283517,#283974,.T.); +#283974 = LINE('',#283975,#283976); +#283975 = CARTESIAN_POINT('',(133.122836,-80.514805,1.51)); +#283976 = VECTOR('',#283977,1.); +#283977 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#283978 = PLANE('',#283979); +#283979 = AXIS2_PLACEMENT_3D('',#283980,#283981,#283982); +#283980 = CARTESIAN_POINT('',(133.122836,-80.514805,1.51)); +#283981 = DIRECTION('',(-0.965925627198,-0.25881978812,0.)); +#283982 = DIRECTION('',(-0.25881978812,0.965925627198,0.)); +#283983 = ADVANCED_FACE('',(#283984),#284011,.F.); +#283984 = FACE_BOUND('',#283985,.T.); +#283985 = EDGE_LOOP('',(#283986,#283996,#284003,#284004)); +#283986 = ORIENTED_EDGE('',*,*,#283987,.T.); +#283987 = EDGE_CURVE('',#283988,#283990,#283992,.T.); +#283988 = VERTEX_POINT('',#283989); +#283989 = CARTESIAN_POINT('',(133.537255,-80.4,1.51)); +#283990 = VERTEX_POINT('',#283991); +#283991 = CARTESIAN_POINT('',(133.537255,-80.4,1.545)); +#283992 = LINE('',#283993,#283994); +#283993 = CARTESIAN_POINT('',(133.537255,-80.4,1.51)); +#283994 = VECTOR('',#283995,1.); +#283995 = DIRECTION('',(0.,0.,1.)); +#283996 = ORIENTED_EDGE('',*,*,#283997,.T.); +#283997 = EDGE_CURVE('',#283990,#283990,#283998,.T.); +#283998 = CIRCLE('',#283999,0.137255); +#283999 = AXIS2_PLACEMENT_3D('',#284000,#284001,#284002); +#284000 = CARTESIAN_POINT('',(133.4,-80.4,1.545)); +#284001 = DIRECTION('',(0.,0.,1.)); +#284002 = DIRECTION('',(1.,0.,-0.)); +#284003 = ORIENTED_EDGE('',*,*,#283987,.F.); +#284004 = ORIENTED_EDGE('',*,*,#284005,.F.); +#284005 = EDGE_CURVE('',#283988,#283988,#284006,.T.); +#284006 = CIRCLE('',#284007,0.137255); +#284007 = AXIS2_PLACEMENT_3D('',#284008,#284009,#284010); +#284008 = CARTESIAN_POINT('',(133.4,-80.4,1.51)); +#284009 = DIRECTION('',(0.,0.,1.)); +#284010 = DIRECTION('',(1.,0.,-0.)); +#284011 = CYLINDRICAL_SURFACE('',#284012,0.137255); +#284012 = AXIS2_PLACEMENT_3D('',#284013,#284014,#284015); +#284013 = CARTESIAN_POINT('',(133.4,-80.4,1.51)); +#284014 = DIRECTION('',(-0.,-0.,-1.)); +#284015 = DIRECTION('',(1.,0.,-0.)); +#284016 = ADVANCED_FACE('',(#284017,#284034),#284037,.F.); +#284017 = FACE_BOUND('',#284018,.T.); +#284018 = EDGE_LOOP('',(#284019,#284020,#284021,#284022,#284023,#284024, + #284025,#284026,#284027,#284028,#284029,#284030,#284031,#284032, + #284033)); +#284019 = ORIENTED_EDGE('',*,*,#283542,.T.); +#284020 = ORIENTED_EDGE('',*,*,#283573,.T.); +#284021 = ORIENTED_EDGE('',*,*,#283604,.T.); +#284022 = ORIENTED_EDGE('',*,*,#283635,.T.); +#284023 = ORIENTED_EDGE('',*,*,#283666,.T.); +#284024 = ORIENTED_EDGE('',*,*,#283698,.T.); +#284025 = ORIENTED_EDGE('',*,*,#283730,.T.); +#284026 = ORIENTED_EDGE('',*,*,#283761,.T.); +#284027 = ORIENTED_EDGE('',*,*,#283793,.T.); +#284028 = ORIENTED_EDGE('',*,*,#283825,.T.); +#284029 = ORIENTED_EDGE('',*,*,#283856,.T.); +#284030 = ORIENTED_EDGE('',*,*,#283887,.T.); +#284031 = ORIENTED_EDGE('',*,*,#283918,.T.); +#284032 = ORIENTED_EDGE('',*,*,#283950,.T.); +#284033 = ORIENTED_EDGE('',*,*,#283973,.T.); +#284034 = FACE_BOUND('',#284035,.T.); +#284035 = EDGE_LOOP('',(#284036)); +#284036 = ORIENTED_EDGE('',*,*,#284005,.T.); +#284037 = PLANE('',#284038); +#284038 = AXIS2_PLACEMENT_3D('',#284039,#284040,#284041); +#284039 = CARTESIAN_POINT('',(0.,0.,1.51)); +#284040 = DIRECTION('',(0.,0.,1.)); +#284041 = DIRECTION('',(1.,0.,-0.)); +#284042 = ADVANCED_FACE('',(#284043,#284060),#284063,.T.); +#284043 = FACE_BOUND('',#284044,.F.); +#284044 = EDGE_LOOP('',(#284045,#284046,#284047,#284048,#284049,#284050, + #284051,#284052,#284053,#284054,#284055,#284056,#284057,#284058, + #284059)); +#284045 = ORIENTED_EDGE('',*,*,#283526,.T.); +#284046 = ORIENTED_EDGE('',*,*,#283557,.T.); +#284047 = ORIENTED_EDGE('',*,*,#283588,.T.); +#284048 = ORIENTED_EDGE('',*,*,#283619,.T.); +#284049 = ORIENTED_EDGE('',*,*,#283650,.T.); +#284050 = ORIENTED_EDGE('',*,*,#283681,.T.); +#284051 = ORIENTED_EDGE('',*,*,#283714,.T.); +#284052 = ORIENTED_EDGE('',*,*,#283745,.T.); +#284053 = ORIENTED_EDGE('',*,*,#283776,.T.); +#284054 = ORIENTED_EDGE('',*,*,#283809,.T.); +#284055 = ORIENTED_EDGE('',*,*,#283840,.T.); +#284056 = ORIENTED_EDGE('',*,*,#283871,.T.); +#284057 = ORIENTED_EDGE('',*,*,#283902,.T.); +#284058 = ORIENTED_EDGE('',*,*,#283933,.T.); +#284059 = ORIENTED_EDGE('',*,*,#283966,.T.); +#284060 = FACE_BOUND('',#284061,.F.); +#284061 = EDGE_LOOP('',(#284062)); +#284062 = ORIENTED_EDGE('',*,*,#283997,.T.); +#284063 = PLANE('',#284064); +#284064 = AXIS2_PLACEMENT_3D('',#284065,#284066,#284067); +#284065 = CARTESIAN_POINT('',(0.,0.,1.545)); +#284066 = DIRECTION('',(0.,0.,1.)); +#284067 = DIRECTION('',(1.,0.,-0.)); +#284068 = MANIFOLD_SOLID_BREP('',#284069); +#284069 = CLOSED_SHELL('',(#284070,#284110,#284141,#284172,#284203, + #284234,#284265,#284296,#284327,#284358,#284389,#284420,#284453, + #284484,#284515,#284546,#284577,#284608,#284639,#284670,#284701, + #284732,#284763,#284796,#284818,#284851,#284886)); +#284070 = ADVANCED_FACE('',(#284071),#284105,.F.); +#284071 = FACE_BOUND('',#284072,.F.); +#284072 = EDGE_LOOP('',(#284073,#284083,#284091,#284099)); +#284073 = ORIENTED_EDGE('',*,*,#284074,.T.); +#284074 = EDGE_CURVE('',#284075,#284077,#284079,.T.); +#284075 = VERTEX_POINT('',#284076); +#284076 = CARTESIAN_POINT('',(143.483147,-78.944443,0.)); +#284077 = VERTEX_POINT('',#284078); +#284078 = CARTESIAN_POINT('',(143.483147,-78.944443,-3.5E-02)); +#284079 = LINE('',#284080,#284081); +#284080 = CARTESIAN_POINT('',(143.483147,-78.944443,0.)); +#284081 = VECTOR('',#284082,1.); +#284082 = DIRECTION('',(0.,0.,-1.)); +#284083 = ORIENTED_EDGE('',*,*,#284084,.T.); +#284084 = EDGE_CURVE('',#284077,#284085,#284087,.T.); +#284085 = VERTEX_POINT('',#284086); +#284086 = CARTESIAN_POINT('',(143.498079,-78.980491,-3.5E-02)); +#284087 = LINE('',#284088,#284089); +#284088 = CARTESIAN_POINT('',(143.483147,-78.944443,-3.5E-02)); +#284089 = VECTOR('',#284090,1.); +#284090 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#284091 = ORIENTED_EDGE('',*,*,#284092,.F.); +#284092 = EDGE_CURVE('',#284093,#284085,#284095,.T.); +#284093 = VERTEX_POINT('',#284094); +#284094 = CARTESIAN_POINT('',(143.498079,-78.980491,0.)); +#284095 = LINE('',#284096,#284097); +#284096 = CARTESIAN_POINT('',(143.498079,-78.980491,0.)); +#284097 = VECTOR('',#284098,1.); +#284098 = DIRECTION('',(0.,0.,-1.)); +#284099 = ORIENTED_EDGE('',*,*,#284100,.F.); +#284100 = EDGE_CURVE('',#284075,#284093,#284101,.T.); +#284101 = LINE('',#284102,#284103); +#284102 = CARTESIAN_POINT('',(143.483147,-78.944443,0.)); +#284103 = VECTOR('',#284104,1.); +#284104 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#284105 = PLANE('',#284106); +#284106 = AXIS2_PLACEMENT_3D('',#284107,#284108,#284109); +#284107 = CARTESIAN_POINT('',(143.483147,-78.944443,0.)); +#284108 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#284109 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#284110 = ADVANCED_FACE('',(#284111),#284136,.F.); +#284111 = FACE_BOUND('',#284112,.F.); +#284112 = EDGE_LOOP('',(#284113,#284114,#284122,#284130)); +#284113 = ORIENTED_EDGE('',*,*,#284092,.T.); +#284114 = ORIENTED_EDGE('',*,*,#284115,.T.); +#284115 = EDGE_CURVE('',#284085,#284116,#284118,.T.); +#284116 = VERTEX_POINT('',#284117); +#284117 = CARTESIAN_POINT('',(143.498079,-79.668038,-3.5E-02)); +#284118 = LINE('',#284119,#284120); +#284119 = CARTESIAN_POINT('',(143.498079,-78.980491,-3.5E-02)); +#284120 = VECTOR('',#284121,1.); +#284121 = DIRECTION('',(0.,-1.,0.)); +#284122 = ORIENTED_EDGE('',*,*,#284123,.F.); +#284123 = EDGE_CURVE('',#284124,#284116,#284126,.T.); +#284124 = VERTEX_POINT('',#284125); +#284125 = CARTESIAN_POINT('',(143.498079,-79.668038,0.)); +#284126 = LINE('',#284127,#284128); +#284127 = CARTESIAN_POINT('',(143.498079,-79.668038,0.)); +#284128 = VECTOR('',#284129,1.); +#284129 = DIRECTION('',(0.,0.,-1.)); +#284130 = ORIENTED_EDGE('',*,*,#284131,.F.); +#284131 = EDGE_CURVE('',#284093,#284124,#284132,.T.); +#284132 = LINE('',#284133,#284134); +#284133 = CARTESIAN_POINT('',(143.498079,-78.980491,0.)); +#284134 = VECTOR('',#284135,1.); +#284135 = DIRECTION('',(0.,-1.,0.)); +#284136 = PLANE('',#284137); +#284137 = AXIS2_PLACEMENT_3D('',#284138,#284139,#284140); +#284138 = CARTESIAN_POINT('',(143.498079,-78.980491,0.)); +#284139 = DIRECTION('',(-1.,-0.,-0.)); +#284140 = DIRECTION('',(0.,-1.,0.)); +#284141 = ADVANCED_FACE('',(#284142),#284167,.F.); +#284142 = FACE_BOUND('',#284143,.F.); +#284143 = EDGE_LOOP('',(#284144,#284145,#284153,#284161)); +#284144 = ORIENTED_EDGE('',*,*,#284123,.T.); +#284145 = ORIENTED_EDGE('',*,*,#284146,.T.); +#284146 = EDGE_CURVE('',#284116,#284147,#284149,.T.); +#284147 = VERTEX_POINT('',#284148); +#284148 = CARTESIAN_POINT('',(143.483147,-79.704087,-3.5E-02)); +#284149 = LINE('',#284150,#284151); +#284150 = CARTESIAN_POINT('',(143.498079,-79.668038,-3.5E-02)); +#284151 = VECTOR('',#284152,1.); +#284152 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#284153 = ORIENTED_EDGE('',*,*,#284154,.F.); +#284154 = EDGE_CURVE('',#284155,#284147,#284157,.T.); +#284155 = VERTEX_POINT('',#284156); +#284156 = CARTESIAN_POINT('',(143.483147,-79.704087,0.)); +#284157 = LINE('',#284158,#284159); +#284158 = CARTESIAN_POINT('',(143.483147,-79.704087,0.)); +#284159 = VECTOR('',#284160,1.); +#284160 = DIRECTION('',(0.,0.,-1.)); +#284161 = ORIENTED_EDGE('',*,*,#284162,.F.); +#284162 = EDGE_CURVE('',#284124,#284155,#284163,.T.); +#284163 = LINE('',#284164,#284165); +#284164 = CARTESIAN_POINT('',(143.498079,-79.668038,0.)); +#284165 = VECTOR('',#284166,1.); +#284166 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#284167 = PLANE('',#284168); +#284168 = AXIS2_PLACEMENT_3D('',#284169,#284170,#284171); +#284169 = CARTESIAN_POINT('',(143.498079,-79.668038,0.)); +#284170 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#284171 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#284172 = ADVANCED_FACE('',(#284173),#284198,.F.); +#284173 = FACE_BOUND('',#284174,.F.); +#284174 = EDGE_LOOP('',(#284175,#284176,#284184,#284192)); +#284175 = ORIENTED_EDGE('',*,*,#284154,.T.); +#284176 = ORIENTED_EDGE('',*,*,#284177,.T.); +#284177 = EDGE_CURVE('',#284147,#284178,#284180,.T.); +#284178 = VERTEX_POINT('',#284179); +#284179 = CARTESIAN_POINT('',(143.094086,-80.093147,-3.5E-02)); +#284180 = LINE('',#284181,#284182); +#284181 = CARTESIAN_POINT('',(143.483147,-79.704087,-3.5E-02)); +#284182 = VECTOR('',#284183,1.); +#284183 = DIRECTION('',(-0.707107689922,-0.70710587245,0.)); +#284184 = ORIENTED_EDGE('',*,*,#284185,.F.); +#284185 = EDGE_CURVE('',#284186,#284178,#284188,.T.); +#284186 = VERTEX_POINT('',#284187); +#284187 = CARTESIAN_POINT('',(143.094086,-80.093147,0.)); +#284188 = LINE('',#284189,#284190); +#284189 = CARTESIAN_POINT('',(143.094086,-80.093147,0.)); +#284190 = VECTOR('',#284191,1.); +#284191 = DIRECTION('',(0.,0.,-1.)); +#284192 = ORIENTED_EDGE('',*,*,#284193,.F.); +#284193 = EDGE_CURVE('',#284155,#284186,#284194,.T.); +#284194 = LINE('',#284195,#284196); +#284195 = CARTESIAN_POINT('',(143.483147,-79.704087,0.)); +#284196 = VECTOR('',#284197,1.); +#284197 = DIRECTION('',(-0.707107689922,-0.70710587245,0.)); +#284198 = PLANE('',#284199); +#284199 = AXIS2_PLACEMENT_3D('',#284200,#284201,#284202); +#284200 = CARTESIAN_POINT('',(143.483147,-79.704087,0.)); +#284201 = DIRECTION('',(-0.70710587245,0.707107689922,0.)); +#284202 = DIRECTION('',(-0.707107689922,-0.70710587245,0.)); +#284203 = ADVANCED_FACE('',(#284204),#284229,.F.); +#284204 = FACE_BOUND('',#284205,.F.); +#284205 = EDGE_LOOP('',(#284206,#284207,#284215,#284223)); +#284206 = ORIENTED_EDGE('',*,*,#284185,.T.); +#284207 = ORIENTED_EDGE('',*,*,#284208,.T.); +#284208 = EDGE_CURVE('',#284178,#284209,#284211,.T.); +#284209 = VERTEX_POINT('',#284210); +#284210 = CARTESIAN_POINT('',(143.058038,-80.108079,-3.5E-02)); +#284211 = LINE('',#284212,#284213); +#284212 = CARTESIAN_POINT('',(143.094086,-80.093147,-3.5E-02)); +#284213 = VECTOR('',#284214,1.); +#284214 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#284215 = ORIENTED_EDGE('',*,*,#284216,.F.); +#284216 = EDGE_CURVE('',#284217,#284209,#284219,.T.); +#284217 = VERTEX_POINT('',#284218); +#284218 = CARTESIAN_POINT('',(143.058038,-80.108079,0.)); +#284219 = LINE('',#284220,#284221); +#284220 = CARTESIAN_POINT('',(143.058038,-80.108079,0.)); +#284221 = VECTOR('',#284222,1.); +#284222 = DIRECTION('',(0.,0.,-1.)); +#284223 = ORIENTED_EDGE('',*,*,#284224,.F.); +#284224 = EDGE_CURVE('',#284186,#284217,#284225,.T.); +#284225 = LINE('',#284226,#284227); +#284226 = CARTESIAN_POINT('',(143.094086,-80.093147,0.)); +#284227 = VECTOR('',#284228,1.); +#284228 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#284229 = PLANE('',#284230); +#284230 = AXIS2_PLACEMENT_3D('',#284231,#284232,#284233); +#284231 = CARTESIAN_POINT('',(143.094086,-80.093147,0.)); +#284232 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#284233 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#284234 = ADVANCED_FACE('',(#284235),#284260,.F.); +#284235 = FACE_BOUND('',#284236,.F.); +#284236 = EDGE_LOOP('',(#284237,#284238,#284246,#284254)); +#284237 = ORIENTED_EDGE('',*,*,#284216,.T.); +#284238 = ORIENTED_EDGE('',*,*,#284239,.T.); +#284239 = EDGE_CURVE('',#284209,#284240,#284242,.T.); +#284240 = VERTEX_POINT('',#284241); +#284241 = CARTESIAN_POINT('',(137.13902,-80.108079,-3.5E-02)); +#284242 = LINE('',#284243,#284244); +#284243 = CARTESIAN_POINT('',(143.058038,-80.108079,-3.5E-02)); +#284244 = VECTOR('',#284245,1.); +#284245 = DIRECTION('',(-1.,0.,0.)); +#284246 = ORIENTED_EDGE('',*,*,#284247,.F.); +#284247 = EDGE_CURVE('',#284248,#284240,#284250,.T.); +#284248 = VERTEX_POINT('',#284249); +#284249 = CARTESIAN_POINT('',(137.13902,-80.108079,0.)); +#284250 = LINE('',#284251,#284252); +#284251 = CARTESIAN_POINT('',(137.13902,-80.108079,0.)); +#284252 = VECTOR('',#284253,1.); +#284253 = DIRECTION('',(0.,0.,-1.)); +#284254 = ORIENTED_EDGE('',*,*,#284255,.F.); +#284255 = EDGE_CURVE('',#284217,#284248,#284256,.T.); +#284256 = LINE('',#284257,#284258); +#284257 = CARTESIAN_POINT('',(143.058038,-80.108079,0.)); +#284258 = VECTOR('',#284259,1.); +#284259 = DIRECTION('',(-1.,0.,0.)); +#284260 = PLANE('',#284261); +#284261 = AXIS2_PLACEMENT_3D('',#284262,#284263,#284264); +#284262 = CARTESIAN_POINT('',(143.058038,-80.108079,0.)); +#284263 = DIRECTION('',(0.,1.,0.)); +#284264 = DIRECTION('',(-1.,0.,0.)); +#284265 = ADVANCED_FACE('',(#284266),#284291,.F.); +#284266 = FACE_BOUND('',#284267,.F.); +#284267 = EDGE_LOOP('',(#284268,#284269,#284277,#284285)); +#284268 = ORIENTED_EDGE('',*,*,#284247,.T.); +#284269 = ORIENTED_EDGE('',*,*,#284270,.T.); +#284270 = EDGE_CURVE('',#284240,#284271,#284273,.T.); +#284271 = VERTEX_POINT('',#284272); +#284272 = CARTESIAN_POINT('',(137.102972,-80.093147,-3.5E-02)); +#284273 = LINE('',#284274,#284275); +#284274 = CARTESIAN_POINT('',(137.13902,-80.108079,-3.5E-02)); +#284275 = VECTOR('',#284276,1.); +#284276 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#284277 = ORIENTED_EDGE('',*,*,#284278,.F.); +#284278 = EDGE_CURVE('',#284279,#284271,#284281,.T.); +#284279 = VERTEX_POINT('',#284280); +#284280 = CARTESIAN_POINT('',(137.102972,-80.093147,0.)); +#284281 = LINE('',#284282,#284283); +#284282 = CARTESIAN_POINT('',(137.102972,-80.093147,0.)); +#284283 = VECTOR('',#284284,1.); +#284284 = DIRECTION('',(0.,0.,-1.)); +#284285 = ORIENTED_EDGE('',*,*,#284286,.F.); +#284286 = EDGE_CURVE('',#284248,#284279,#284287,.T.); +#284287 = LINE('',#284288,#284289); +#284288 = CARTESIAN_POINT('',(137.13902,-80.108079,0.)); +#284289 = VECTOR('',#284290,1.); +#284290 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#284291 = PLANE('',#284292); +#284292 = AXIS2_PLACEMENT_3D('',#284293,#284294,#284295); +#284293 = CARTESIAN_POINT('',(137.13902,-80.108079,0.)); +#284294 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#284295 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#284296 = ADVANCED_FACE('',(#284297),#284322,.F.); +#284297 = FACE_BOUND('',#284298,.F.); +#284298 = EDGE_LOOP('',(#284299,#284300,#284308,#284316)); +#284299 = ORIENTED_EDGE('',*,*,#284278,.T.); +#284300 = ORIENTED_EDGE('',*,*,#284301,.T.); +#284301 = EDGE_CURVE('',#284271,#284302,#284304,.T.); +#284302 = VERTEX_POINT('',#284303); +#284303 = CARTESIAN_POINT('',(136.607107,-79.6,-3.5E-02)); +#284304 = LINE('',#284305,#284306); +#284305 = CARTESIAN_POINT('',(137.102972,-80.093147,-3.5E-02)); +#284306 = VECTOR('',#284307,1.); +#284307 = DIRECTION('',(-0.70904737249,0.705160849427,0.)); +#284308 = ORIENTED_EDGE('',*,*,#284309,.F.); +#284309 = EDGE_CURVE('',#284310,#284302,#284312,.T.); +#284310 = VERTEX_POINT('',#284311); +#284311 = CARTESIAN_POINT('',(136.607107,-79.6,0.)); +#284312 = LINE('',#284313,#284314); +#284313 = CARTESIAN_POINT('',(136.607107,-79.6,0.)); +#284314 = VECTOR('',#284315,1.); +#284315 = DIRECTION('',(0.,0.,-1.)); +#284316 = ORIENTED_EDGE('',*,*,#284317,.F.); +#284317 = EDGE_CURVE('',#284279,#284310,#284318,.T.); +#284318 = LINE('',#284319,#284320); +#284319 = CARTESIAN_POINT('',(137.102972,-80.093147,0.)); +#284320 = VECTOR('',#284321,1.); +#284321 = DIRECTION('',(-0.70904737249,0.705160849427,0.)); +#284322 = PLANE('',#284323); +#284323 = AXIS2_PLACEMENT_3D('',#284324,#284325,#284326); +#284324 = CARTESIAN_POINT('',(137.102972,-80.093147,0.)); +#284325 = DIRECTION('',(0.705160849427,0.70904737249,0.)); +#284326 = DIRECTION('',(-0.70904737249,0.705160849427,0.)); +#284327 = ADVANCED_FACE('',(#284328),#284353,.F.); +#284328 = FACE_BOUND('',#284329,.F.); +#284329 = EDGE_LOOP('',(#284330,#284331,#284339,#284347)); +#284330 = ORIENTED_EDGE('',*,*,#284309,.T.); +#284331 = ORIENTED_EDGE('',*,*,#284332,.T.); +#284332 = EDGE_CURVE('',#284302,#284333,#284335,.T.); +#284333 = VERTEX_POINT('',#284334); +#284334 = CARTESIAN_POINT('',(134.341422,-79.6,-3.5E-02)); +#284335 = LINE('',#284336,#284337); +#284336 = CARTESIAN_POINT('',(136.607107,-79.6,-3.5E-02)); +#284337 = VECTOR('',#284338,1.); +#284338 = DIRECTION('',(-1.,0.,0.)); +#284339 = ORIENTED_EDGE('',*,*,#284340,.F.); +#284340 = EDGE_CURVE('',#284341,#284333,#284343,.T.); +#284341 = VERTEX_POINT('',#284342); +#284342 = CARTESIAN_POINT('',(134.341422,-79.6,0.)); +#284343 = LINE('',#284344,#284345); +#284344 = CARTESIAN_POINT('',(134.341422,-79.6,0.)); +#284345 = VECTOR('',#284346,1.); +#284346 = DIRECTION('',(0.,0.,-1.)); +#284347 = ORIENTED_EDGE('',*,*,#284348,.F.); +#284348 = EDGE_CURVE('',#284310,#284341,#284349,.T.); +#284349 = LINE('',#284350,#284351); +#284350 = CARTESIAN_POINT('',(136.607107,-79.6,0.)); +#284351 = VECTOR('',#284352,1.); +#284352 = DIRECTION('',(-1.,0.,0.)); +#284353 = PLANE('',#284354); +#284354 = AXIS2_PLACEMENT_3D('',#284355,#284356,#284357); +#284355 = CARTESIAN_POINT('',(136.607107,-79.6,0.)); +#284356 = DIRECTION('',(0.,1.,0.)); +#284357 = DIRECTION('',(-1.,0.,0.)); +#284358 = ADVANCED_FACE('',(#284359),#284384,.F.); +#284359 = FACE_BOUND('',#284360,.F.); +#284360 = EDGE_LOOP('',(#284361,#284362,#284370,#284378)); +#284361 = ORIENTED_EDGE('',*,*,#284340,.T.); +#284362 = ORIENTED_EDGE('',*,*,#284363,.T.); +#284363 = EDGE_CURVE('',#284333,#284364,#284366,.T.); +#284364 = VERTEX_POINT('',#284365); +#284365 = CARTESIAN_POINT('',(133.6695,-80.271921,-3.5E-02)); +#284366 = LINE('',#284367,#284368); +#284367 = CARTESIAN_POINT('',(134.341422,-79.6,-3.5E-02)); +#284368 = VECTOR('',#284369,1.); +#284369 = DIRECTION('',(-0.707107307369,-0.707106255004,0.)); +#284370 = ORIENTED_EDGE('',*,*,#284371,.F.); +#284371 = EDGE_CURVE('',#284372,#284364,#284374,.T.); +#284372 = VERTEX_POINT('',#284373); +#284373 = CARTESIAN_POINT('',(133.6695,-80.271921,0.)); +#284374 = LINE('',#284375,#284376); +#284375 = CARTESIAN_POINT('',(133.6695,-80.271921,0.)); +#284376 = VECTOR('',#284377,1.); +#284377 = DIRECTION('',(0.,0.,-1.)); +#284378 = ORIENTED_EDGE('',*,*,#284379,.F.); +#284379 = EDGE_CURVE('',#284341,#284372,#284380,.T.); +#284380 = LINE('',#284381,#284382); +#284381 = CARTESIAN_POINT('',(134.341422,-79.6,0.)); +#284382 = VECTOR('',#284383,1.); +#284383 = DIRECTION('',(-0.707107307369,-0.707106255004,0.)); +#284384 = PLANE('',#284385); +#284385 = AXIS2_PLACEMENT_3D('',#284386,#284387,#284388); +#284386 = CARTESIAN_POINT('',(134.341422,-79.6,0.)); +#284387 = DIRECTION('',(-0.707106255004,0.707107307369,0.)); +#284388 = DIRECTION('',(-0.707107307369,-0.707106255004,0.)); +#284389 = ADVANCED_FACE('',(#284390),#284415,.F.); +#284390 = FACE_BOUND('',#284391,.F.); +#284391 = EDGE_LOOP('',(#284392,#284393,#284401,#284409)); +#284392 = ORIENTED_EDGE('',*,*,#284371,.T.); +#284393 = ORIENTED_EDGE('',*,*,#284394,.T.); +#284394 = EDGE_CURVE('',#284364,#284395,#284397,.T.); +#284395 = VERTEX_POINT('',#284396); +#284396 = CARTESIAN_POINT('',(133.677164,-80.285195,-3.5E-02)); +#284397 = LINE('',#284398,#284399); +#284398 = CARTESIAN_POINT('',(133.6695,-80.271921,-3.5E-02)); +#284399 = VECTOR('',#284400,1.); +#284400 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#284401 = ORIENTED_EDGE('',*,*,#284402,.F.); +#284402 = EDGE_CURVE('',#284403,#284395,#284405,.T.); +#284403 = VERTEX_POINT('',#284404); +#284404 = CARTESIAN_POINT('',(133.677164,-80.285195,0.)); +#284405 = LINE('',#284406,#284407); +#284406 = CARTESIAN_POINT('',(133.677164,-80.285195,0.)); +#284407 = VECTOR('',#284408,1.); +#284408 = DIRECTION('',(0.,0.,-1.)); +#284409 = ORIENTED_EDGE('',*,*,#284410,.F.); +#284410 = EDGE_CURVE('',#284372,#284403,#284411,.T.); +#284411 = LINE('',#284412,#284413); +#284412 = CARTESIAN_POINT('',(133.6695,-80.271921,0.)); +#284413 = VECTOR('',#284414,1.); +#284414 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#284415 = PLANE('',#284416); +#284416 = AXIS2_PLACEMENT_3D('',#284417,#284418,#284419); +#284417 = CARTESIAN_POINT('',(133.6695,-80.271921,0.)); +#284418 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#284419 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#284420 = ADVANCED_FACE('',(#284421),#284448,.T.); +#284421 = FACE_BOUND('',#284422,.F.); +#284422 = EDGE_LOOP('',(#284423,#284424,#284433,#284441)); +#284423 = ORIENTED_EDGE('',*,*,#284402,.T.); +#284424 = ORIENTED_EDGE('',*,*,#284425,.T.); +#284425 = EDGE_CURVE('',#284395,#284426,#284428,.T.); +#284426 = VERTEX_POINT('',#284427); +#284427 = CARTESIAN_POINT('',(133.514805,-80.122836,-3.5E-02)); +#284428 = CIRCLE('',#284429,0.299999934501); +#284429 = AXIS2_PLACEMENT_3D('',#284430,#284431,#284432); +#284430 = CARTESIAN_POINT('',(133.40000014059,-80.3999998594,-3.5E-02)); +#284431 = DIRECTION('',(0.,0.,-1.)); +#284432 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#284433 = ORIENTED_EDGE('',*,*,#284434,.F.); +#284434 = EDGE_CURVE('',#284435,#284426,#284437,.T.); +#284435 = VERTEX_POINT('',#284436); +#284436 = CARTESIAN_POINT('',(133.514805,-80.122836,0.)); +#284437 = LINE('',#284438,#284439); +#284438 = CARTESIAN_POINT('',(133.514805,-80.122836,0.)); +#284439 = VECTOR('',#284440,1.); +#284440 = DIRECTION('',(0.,0.,-1.)); +#284441 = ORIENTED_EDGE('',*,*,#284442,.F.); +#284442 = EDGE_CURVE('',#284403,#284435,#284443,.T.); +#284443 = CIRCLE('',#284444,0.299999934501); +#284444 = AXIS2_PLACEMENT_3D('',#284445,#284446,#284447); +#284445 = CARTESIAN_POINT('',(133.40000014059,-80.3999998594,0.)); +#284446 = DIRECTION('',(0.,0.,-1.)); +#284447 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#284448 = CYLINDRICAL_SURFACE('',#284449,0.299999934501); +#284449 = AXIS2_PLACEMENT_3D('',#284450,#284451,#284452); +#284450 = CARTESIAN_POINT('',(133.40000014059,-80.3999998594,0.)); +#284451 = DIRECTION('',(-0.,-0.,1.)); +#284452 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#284453 = ADVANCED_FACE('',(#284454),#284479,.F.); +#284454 = FACE_BOUND('',#284455,.F.); +#284455 = EDGE_LOOP('',(#284456,#284457,#284465,#284473)); +#284456 = ORIENTED_EDGE('',*,*,#284434,.T.); +#284457 = ORIENTED_EDGE('',*,*,#284458,.T.); +#284458 = EDGE_CURVE('',#284426,#284459,#284461,.T.); +#284459 = VERTEX_POINT('',#284460); +#284460 = CARTESIAN_POINT('',(133.528078,-80.130499,-3.5E-02)); +#284461 = LINE('',#284462,#284463); +#284462 = CARTESIAN_POINT('',(133.514805,-80.122836,-3.5E-02)); +#284463 = VECTOR('',#284464,1.); +#284464 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#284465 = ORIENTED_EDGE('',*,*,#284466,.F.); +#284466 = EDGE_CURVE('',#284467,#284459,#284469,.T.); +#284467 = VERTEX_POINT('',#284468); +#284468 = CARTESIAN_POINT('',(133.528078,-80.130499,0.)); +#284469 = LINE('',#284470,#284471); +#284470 = CARTESIAN_POINT('',(133.528078,-80.130499,0.)); +#284471 = VECTOR('',#284472,1.); +#284472 = DIRECTION('',(0.,0.,-1.)); +#284473 = ORIENTED_EDGE('',*,*,#284474,.F.); +#284474 = EDGE_CURVE('',#284435,#284467,#284475,.T.); +#284475 = LINE('',#284476,#284477); +#284476 = CARTESIAN_POINT('',(133.514805,-80.122836,0.)); +#284477 = VECTOR('',#284478,1.); +#284478 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#284479 = PLANE('',#284480); +#284480 = AXIS2_PLACEMENT_3D('',#284481,#284482,#284483); +#284481 = CARTESIAN_POINT('',(133.514805,-80.122836,0.)); +#284482 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#284483 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#284484 = ADVANCED_FACE('',(#284485),#284510,.F.); +#284485 = FACE_BOUND('',#284486,.F.); +#284486 = EDGE_LOOP('',(#284487,#284488,#284496,#284504)); +#284487 = ORIENTED_EDGE('',*,*,#284466,.T.); +#284488 = ORIENTED_EDGE('',*,*,#284489,.T.); +#284489 = EDGE_CURVE('',#284459,#284490,#284492,.T.); +#284490 = VERTEX_POINT('',#284491); +#284491 = CARTESIAN_POINT('',(134.244442,-79.416853,-3.5E-02)); +#284492 = LINE('',#284493,#284494); +#284493 = CARTESIAN_POINT('',(133.528078,-80.130499,-3.5E-02)); +#284494 = VECTOR('',#284495,1.); +#284495 = DIRECTION('',(0.708449489479,0.705761518402,0.)); +#284496 = ORIENTED_EDGE('',*,*,#284497,.F.); +#284497 = EDGE_CURVE('',#284498,#284490,#284500,.T.); +#284498 = VERTEX_POINT('',#284499); +#284499 = CARTESIAN_POINT('',(134.244442,-79.416853,0.)); +#284500 = LINE('',#284501,#284502); +#284501 = CARTESIAN_POINT('',(134.244442,-79.416853,0.)); +#284502 = VECTOR('',#284503,1.); +#284503 = DIRECTION('',(0.,0.,-1.)); +#284504 = ORIENTED_EDGE('',*,*,#284505,.F.); +#284505 = EDGE_CURVE('',#284467,#284498,#284506,.T.); +#284506 = LINE('',#284507,#284508); +#284507 = CARTESIAN_POINT('',(133.528078,-80.130499,0.)); +#284508 = VECTOR('',#284509,1.); +#284509 = DIRECTION('',(0.708449489479,0.705761518402,0.)); +#284510 = PLANE('',#284511); +#284511 = AXIS2_PLACEMENT_3D('',#284512,#284513,#284514); +#284512 = CARTESIAN_POINT('',(133.528078,-80.130499,0.)); +#284513 = DIRECTION('',(0.705761518402,-0.708449489479,0.)); +#284514 = DIRECTION('',(0.708449489479,0.705761518402,0.)); +#284515 = ADVANCED_FACE('',(#284516),#284541,.F.); +#284516 = FACE_BOUND('',#284517,.F.); +#284517 = EDGE_LOOP('',(#284518,#284519,#284527,#284535)); +#284518 = ORIENTED_EDGE('',*,*,#284497,.T.); +#284519 = ORIENTED_EDGE('',*,*,#284520,.T.); +#284520 = EDGE_CURVE('',#284490,#284521,#284523,.T.); +#284521 = VERTEX_POINT('',#284522); +#284522 = CARTESIAN_POINT('',(134.280491,-79.401921,-3.5E-02)); +#284523 = LINE('',#284524,#284525); +#284524 = CARTESIAN_POINT('',(134.244442,-79.416853,-3.5E-02)); +#284525 = VECTOR('',#284526,1.); +#284526 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#284527 = ORIENTED_EDGE('',*,*,#284528,.F.); +#284528 = EDGE_CURVE('',#284529,#284521,#284531,.T.); +#284529 = VERTEX_POINT('',#284530); +#284530 = CARTESIAN_POINT('',(134.280491,-79.401921,0.)); +#284531 = LINE('',#284532,#284533); +#284532 = CARTESIAN_POINT('',(134.280491,-79.401921,0.)); +#284533 = VECTOR('',#284534,1.); +#284534 = DIRECTION('',(0.,0.,-1.)); +#284535 = ORIENTED_EDGE('',*,*,#284536,.F.); +#284536 = EDGE_CURVE('',#284498,#284529,#284537,.T.); +#284537 = LINE('',#284538,#284539); +#284538 = CARTESIAN_POINT('',(134.244442,-79.416853,0.)); +#284539 = VECTOR('',#284540,1.); +#284540 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#284541 = PLANE('',#284542); +#284542 = AXIS2_PLACEMENT_3D('',#284543,#284544,#284545); +#284543 = CARTESIAN_POINT('',(134.244442,-79.416853,0.)); +#284544 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#284545 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#284546 = ADVANCED_FACE('',(#284547),#284572,.F.); +#284547 = FACE_BOUND('',#284548,.F.); +#284548 = EDGE_LOOP('',(#284549,#284550,#284558,#284566)); +#284549 = ORIENTED_EDGE('',*,*,#284528,.T.); +#284550 = ORIENTED_EDGE('',*,*,#284551,.T.); +#284551 = EDGE_CURVE('',#284521,#284552,#284554,.T.); +#284552 = VERTEX_POINT('',#284553); +#284553 = CARTESIAN_POINT('',(136.668038,-79.401921,-3.5E-02)); +#284554 = LINE('',#284555,#284556); +#284555 = CARTESIAN_POINT('',(134.280491,-79.401921,-3.5E-02)); +#284556 = VECTOR('',#284557,1.); +#284557 = DIRECTION('',(1.,0.,0.)); +#284558 = ORIENTED_EDGE('',*,*,#284559,.F.); +#284559 = EDGE_CURVE('',#284560,#284552,#284562,.T.); +#284560 = VERTEX_POINT('',#284561); +#284561 = CARTESIAN_POINT('',(136.668038,-79.401921,0.)); +#284562 = LINE('',#284563,#284564); +#284563 = CARTESIAN_POINT('',(136.668038,-79.401921,0.)); +#284564 = VECTOR('',#284565,1.); +#284565 = DIRECTION('',(0.,0.,-1.)); +#284566 = ORIENTED_EDGE('',*,*,#284567,.F.); +#284567 = EDGE_CURVE('',#284529,#284560,#284568,.T.); +#284568 = LINE('',#284569,#284570); +#284569 = CARTESIAN_POINT('',(134.280491,-79.401921,0.)); +#284570 = VECTOR('',#284571,1.); +#284571 = DIRECTION('',(1.,0.,0.)); +#284572 = PLANE('',#284573); +#284573 = AXIS2_PLACEMENT_3D('',#284574,#284575,#284576); +#284574 = CARTESIAN_POINT('',(134.280491,-79.401921,0.)); +#284575 = DIRECTION('',(0.,-1.,0.)); +#284576 = DIRECTION('',(1.,0.,0.)); +#284577 = ADVANCED_FACE('',(#284578),#284603,.F.); +#284578 = FACE_BOUND('',#284579,.F.); +#284579 = EDGE_LOOP('',(#284580,#284581,#284589,#284597)); +#284580 = ORIENTED_EDGE('',*,*,#284559,.T.); +#284581 = ORIENTED_EDGE('',*,*,#284582,.T.); +#284582 = EDGE_CURVE('',#284552,#284583,#284585,.T.); +#284583 = VERTEX_POINT('',#284584); +#284584 = CARTESIAN_POINT('',(136.704086,-79.416853,-3.5E-02)); +#284585 = LINE('',#284586,#284587); +#284586 = CARTESIAN_POINT('',(136.668038,-79.401921,-3.5E-02)); +#284587 = VECTOR('',#284588,1.); +#284588 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#284589 = ORIENTED_EDGE('',*,*,#284590,.F.); +#284590 = EDGE_CURVE('',#284591,#284583,#284593,.T.); +#284591 = VERTEX_POINT('',#284592); +#284592 = CARTESIAN_POINT('',(136.704086,-79.416853,0.)); +#284593 = LINE('',#284594,#284595); +#284594 = CARTESIAN_POINT('',(136.704086,-79.416853,0.)); +#284595 = VECTOR('',#284596,1.); +#284596 = DIRECTION('',(0.,0.,-1.)); +#284597 = ORIENTED_EDGE('',*,*,#284598,.F.); +#284598 = EDGE_CURVE('',#284560,#284591,#284599,.T.); +#284599 = LINE('',#284600,#284601); +#284600 = CARTESIAN_POINT('',(136.668038,-79.401921,0.)); +#284601 = VECTOR('',#284602,1.); +#284602 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#284603 = PLANE('',#284604); +#284604 = AXIS2_PLACEMENT_3D('',#284605,#284606,#284607); +#284605 = CARTESIAN_POINT('',(136.668038,-79.401921,0.)); +#284606 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#284607 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#284608 = ADVANCED_FACE('',(#284609),#284634,.F.); +#284609 = FACE_BOUND('',#284610,.F.); +#284610 = EDGE_LOOP('',(#284611,#284612,#284620,#284628)); +#284611 = ORIENTED_EDGE('',*,*,#284590,.T.); +#284612 = ORIENTED_EDGE('',*,*,#284613,.T.); +#284613 = EDGE_CURVE('',#284583,#284614,#284616,.T.); +#284614 = VERTEX_POINT('',#284615); +#284615 = CARTESIAN_POINT('',(137.199951,-79.91,-3.5E-02)); +#284616 = LINE('',#284617,#284618); +#284617 = CARTESIAN_POINT('',(136.704086,-79.416853,-3.5E-02)); +#284618 = VECTOR('',#284619,1.); +#284619 = DIRECTION('',(0.70904737249,-0.705160849427,0.)); +#284620 = ORIENTED_EDGE('',*,*,#284621,.F.); +#284621 = EDGE_CURVE('',#284622,#284614,#284624,.T.); +#284622 = VERTEX_POINT('',#284623); +#284623 = CARTESIAN_POINT('',(137.199951,-79.91,0.)); +#284624 = LINE('',#284625,#284626); +#284625 = CARTESIAN_POINT('',(137.199951,-79.91,0.)); +#284626 = VECTOR('',#284627,1.); +#284627 = DIRECTION('',(0.,0.,-1.)); +#284628 = ORIENTED_EDGE('',*,*,#284629,.F.); +#284629 = EDGE_CURVE('',#284591,#284622,#284630,.T.); +#284630 = LINE('',#284631,#284632); +#284631 = CARTESIAN_POINT('',(136.704086,-79.416853,0.)); +#284632 = VECTOR('',#284633,1.); +#284633 = DIRECTION('',(0.70904737249,-0.705160849427,0.)); +#284634 = PLANE('',#284635); +#284635 = AXIS2_PLACEMENT_3D('',#284636,#284637,#284638); +#284636 = CARTESIAN_POINT('',(136.704086,-79.416853,0.)); +#284637 = DIRECTION('',(-0.705160849427,-0.70904737249,-0.)); +#284638 = DIRECTION('',(0.70904737249,-0.705160849427,0.)); +#284639 = ADVANCED_FACE('',(#284640),#284665,.F.); +#284640 = FACE_BOUND('',#284641,.F.); +#284641 = EDGE_LOOP('',(#284642,#284643,#284651,#284659)); +#284642 = ORIENTED_EDGE('',*,*,#284621,.T.); +#284643 = ORIENTED_EDGE('',*,*,#284644,.T.); +#284644 = EDGE_CURVE('',#284614,#284645,#284647,.T.); +#284645 = VERTEX_POINT('',#284646); +#284646 = CARTESIAN_POINT('',(142.997107,-79.91,-3.5E-02)); +#284647 = LINE('',#284648,#284649); +#284648 = CARTESIAN_POINT('',(137.199951,-79.91,-3.5E-02)); +#284649 = VECTOR('',#284650,1.); +#284650 = DIRECTION('',(1.,0.,0.)); +#284651 = ORIENTED_EDGE('',*,*,#284652,.F.); +#284652 = EDGE_CURVE('',#284653,#284645,#284655,.T.); +#284653 = VERTEX_POINT('',#284654); +#284654 = CARTESIAN_POINT('',(142.997107,-79.91,0.)); +#284655 = LINE('',#284656,#284657); +#284656 = CARTESIAN_POINT('',(142.997107,-79.91,0.)); +#284657 = VECTOR('',#284658,1.); +#284658 = DIRECTION('',(0.,0.,-1.)); +#284659 = ORIENTED_EDGE('',*,*,#284660,.F.); +#284660 = EDGE_CURVE('',#284622,#284653,#284661,.T.); +#284661 = LINE('',#284662,#284663); +#284662 = CARTESIAN_POINT('',(137.199951,-79.91,0.)); +#284663 = VECTOR('',#284664,1.); +#284664 = DIRECTION('',(1.,0.,0.)); +#284665 = PLANE('',#284666); +#284666 = AXIS2_PLACEMENT_3D('',#284667,#284668,#284669); +#284667 = CARTESIAN_POINT('',(137.199951,-79.91,0.)); +#284668 = DIRECTION('',(0.,-1.,0.)); +#284669 = DIRECTION('',(1.,0.,0.)); +#284670 = ADVANCED_FACE('',(#284671),#284696,.F.); +#284671 = FACE_BOUND('',#284672,.F.); +#284672 = EDGE_LOOP('',(#284673,#284674,#284682,#284690)); +#284673 = ORIENTED_EDGE('',*,*,#284652,.T.); +#284674 = ORIENTED_EDGE('',*,*,#284675,.T.); +#284675 = EDGE_CURVE('',#284645,#284676,#284678,.T.); +#284676 = VERTEX_POINT('',#284677); +#284677 = CARTESIAN_POINT('',(143.3,-79.607107,-3.5E-02)); +#284678 = LINE('',#284679,#284680); +#284679 = CARTESIAN_POINT('',(142.997107,-79.91,-3.5E-02)); +#284680 = VECTOR('',#284681,1.); +#284681 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#284682 = ORIENTED_EDGE('',*,*,#284683,.F.); +#284683 = EDGE_CURVE('',#284684,#284676,#284686,.T.); +#284684 = VERTEX_POINT('',#284685); +#284685 = CARTESIAN_POINT('',(143.3,-79.607107,0.)); +#284686 = LINE('',#284687,#284688); +#284687 = CARTESIAN_POINT('',(143.3,-79.607107,0.)); +#284688 = VECTOR('',#284689,1.); +#284689 = DIRECTION('',(0.,0.,-1.)); +#284690 = ORIENTED_EDGE('',*,*,#284691,.F.); +#284691 = EDGE_CURVE('',#284653,#284684,#284692,.T.); +#284692 = LINE('',#284693,#284694); +#284693 = CARTESIAN_POINT('',(142.997107,-79.91,0.)); +#284694 = VECTOR('',#284695,1.); +#284695 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#284696 = PLANE('',#284697); +#284697 = AXIS2_PLACEMENT_3D('',#284698,#284699,#284700); +#284698 = CARTESIAN_POINT('',(142.997107,-79.91,0.)); +#284699 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#284700 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#284701 = ADVANCED_FACE('',(#284702),#284727,.F.); +#284702 = FACE_BOUND('',#284703,.F.); +#284703 = EDGE_LOOP('',(#284704,#284705,#284713,#284721)); +#284704 = ORIENTED_EDGE('',*,*,#284683,.T.); +#284705 = ORIENTED_EDGE('',*,*,#284706,.T.); +#284706 = EDGE_CURVE('',#284676,#284707,#284709,.T.); +#284707 = VERTEX_POINT('',#284708); +#284708 = CARTESIAN_POINT('',(143.3,-79.041422,-3.5E-02)); +#284709 = LINE('',#284710,#284711); +#284710 = CARTESIAN_POINT('',(143.3,-79.607107,-3.5E-02)); +#284711 = VECTOR('',#284712,1.); +#284712 = DIRECTION('',(0.,1.,0.)); +#284713 = ORIENTED_EDGE('',*,*,#284714,.F.); +#284714 = EDGE_CURVE('',#284715,#284707,#284717,.T.); +#284715 = VERTEX_POINT('',#284716); +#284716 = CARTESIAN_POINT('',(143.3,-79.041422,0.)); +#284717 = LINE('',#284718,#284719); +#284718 = CARTESIAN_POINT('',(143.3,-79.041422,0.)); +#284719 = VECTOR('',#284720,1.); +#284720 = DIRECTION('',(0.,0.,-1.)); +#284721 = ORIENTED_EDGE('',*,*,#284722,.F.); +#284722 = EDGE_CURVE('',#284684,#284715,#284723,.T.); +#284723 = LINE('',#284724,#284725); +#284724 = CARTESIAN_POINT('',(143.3,-79.607107,0.)); +#284725 = VECTOR('',#284726,1.); +#284726 = DIRECTION('',(0.,1.,0.)); +#284727 = PLANE('',#284728); +#284728 = AXIS2_PLACEMENT_3D('',#284729,#284730,#284731); +#284729 = CARTESIAN_POINT('',(143.3,-79.607107,0.)); +#284730 = DIRECTION('',(1.,-0.,0.)); +#284731 = DIRECTION('',(0.,1.,0.)); +#284732 = ADVANCED_FACE('',(#284733),#284758,.F.); +#284733 = FACE_BOUND('',#284734,.F.); +#284734 = EDGE_LOOP('',(#284735,#284736,#284744,#284752)); +#284735 = ORIENTED_EDGE('',*,*,#284714,.T.); +#284736 = ORIENTED_EDGE('',*,*,#284737,.T.); +#284737 = EDGE_CURVE('',#284707,#284738,#284740,.T.); +#284738 = VERTEX_POINT('',#284739); +#284739 = CARTESIAN_POINT('',(142.379353,-78.118057,-3.5E-02)); +#284740 = LINE('',#284741,#284742); +#284741 = CARTESIAN_POINT('',(143.3,-79.041422,-3.5E-02)); +#284742 = VECTOR('',#284743,1.); +#284743 = DIRECTION('',(-0.706063767066,0.708148259079,0.)); +#284744 = ORIENTED_EDGE('',*,*,#284745,.F.); +#284745 = EDGE_CURVE('',#284746,#284738,#284748,.T.); +#284746 = VERTEX_POINT('',#284747); +#284747 = CARTESIAN_POINT('',(142.379353,-78.118057,0.)); +#284748 = LINE('',#284749,#284750); +#284749 = CARTESIAN_POINT('',(142.379353,-78.118057,0.)); +#284750 = VECTOR('',#284751,1.); +#284751 = DIRECTION('',(0.,0.,-1.)); +#284752 = ORIENTED_EDGE('',*,*,#284753,.F.); +#284753 = EDGE_CURVE('',#284715,#284746,#284754,.T.); +#284754 = LINE('',#284755,#284756); +#284755 = CARTESIAN_POINT('',(143.3,-79.041422,0.)); +#284756 = VECTOR('',#284757,1.); +#284757 = DIRECTION('',(-0.706063767066,0.708148259079,0.)); +#284758 = PLANE('',#284759); +#284759 = AXIS2_PLACEMENT_3D('',#284760,#284761,#284762); +#284760 = CARTESIAN_POINT('',(143.3,-79.041422,0.)); +#284761 = DIRECTION('',(0.708148259079,0.706063767066,0.)); +#284762 = DIRECTION('',(-0.706063767066,0.708148259079,0.)); +#284763 = ADVANCED_FACE('',(#284764),#284791,.T.); +#284764 = FACE_BOUND('',#284765,.F.); +#284765 = EDGE_LOOP('',(#284766,#284767,#284776,#284784)); +#284766 = ORIENTED_EDGE('',*,*,#284745,.T.); +#284767 = ORIENTED_EDGE('',*,*,#284768,.T.); +#284768 = EDGE_CURVE('',#284738,#284769,#284771,.T.); +#284769 = VERTEX_POINT('',#284770); +#284770 = CARTESIAN_POINT('',(142.518057,-77.979353,-3.5E-02)); +#284771 = CIRCLE('',#284772,9.999988522643E-02); +#284772 = AXIS2_PLACEMENT_3D('',#284773,#284774,#284775); +#284773 = CARTESIAN_POINT('',(142.46249951407,-78.06249951407,-3.5E-02) + ); +#284774 = DIRECTION('',(0.,0.,-1.)); +#284775 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#284776 = ORIENTED_EDGE('',*,*,#284777,.F.); +#284777 = EDGE_CURVE('',#284778,#284769,#284780,.T.); +#284778 = VERTEX_POINT('',#284779); +#284779 = CARTESIAN_POINT('',(142.518057,-77.979353,0.)); +#284780 = LINE('',#284781,#284782); +#284781 = CARTESIAN_POINT('',(142.518057,-77.979353,0.)); +#284782 = VECTOR('',#284783,1.); +#284783 = DIRECTION('',(0.,0.,-1.)); +#284784 = ORIENTED_EDGE('',*,*,#284785,.F.); +#284785 = EDGE_CURVE('',#284746,#284778,#284786,.T.); +#284786 = CIRCLE('',#284787,9.999988522643E-02); +#284787 = AXIS2_PLACEMENT_3D('',#284788,#284789,#284790); +#284788 = CARTESIAN_POINT('',(142.46249951407,-78.06249951407,0.)); +#284789 = DIRECTION('',(0.,0.,-1.)); +#284790 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#284791 = CYLINDRICAL_SURFACE('',#284792,9.999988522643E-02); +#284792 = AXIS2_PLACEMENT_3D('',#284793,#284794,#284795); +#284793 = CARTESIAN_POINT('',(142.46249951407,-78.06249951407,0.)); +#284794 = DIRECTION('',(-0.,-0.,1.)); +#284795 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#284796 = ADVANCED_FACE('',(#284797),#284813,.F.); +#284797 = FACE_BOUND('',#284798,.F.); +#284798 = EDGE_LOOP('',(#284799,#284800,#284806,#284807)); +#284799 = ORIENTED_EDGE('',*,*,#284777,.T.); +#284800 = ORIENTED_EDGE('',*,*,#284801,.T.); +#284801 = EDGE_CURVE('',#284769,#284077,#284802,.T.); +#284802 = LINE('',#284803,#284804); +#284803 = CARTESIAN_POINT('',(142.518057,-77.979353,-3.5E-02)); +#284804 = VECTOR('',#284805,1.); +#284805 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#284806 = ORIENTED_EDGE('',*,*,#284074,.F.); +#284807 = ORIENTED_EDGE('',*,*,#284808,.F.); +#284808 = EDGE_CURVE('',#284778,#284075,#284809,.T.); +#284809 = LINE('',#284810,#284811); +#284810 = CARTESIAN_POINT('',(142.518057,-77.979353,0.)); +#284811 = VECTOR('',#284812,1.); +#284812 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#284813 = PLANE('',#284814); +#284814 = AXIS2_PLACEMENT_3D('',#284815,#284816,#284817); +#284815 = CARTESIAN_POINT('',(142.518057,-77.979353,0.)); +#284816 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#284817 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#284818 = ADVANCED_FACE('',(#284819),#284846,.F.); +#284819 = FACE_BOUND('',#284820,.F.); +#284820 = EDGE_LOOP('',(#284821,#284831,#284838,#284839)); +#284821 = ORIENTED_EDGE('',*,*,#284822,.T.); +#284822 = EDGE_CURVE('',#284823,#284825,#284827,.T.); +#284823 = VERTEX_POINT('',#284824); +#284824 = CARTESIAN_POINT('',(133.537255,-80.4,0.)); +#284825 = VERTEX_POINT('',#284826); +#284826 = CARTESIAN_POINT('',(133.537255,-80.4,-3.5E-02)); +#284827 = LINE('',#284828,#284829); +#284828 = CARTESIAN_POINT('',(133.537255,-80.4,0.)); +#284829 = VECTOR('',#284830,1.); +#284830 = DIRECTION('',(0.,0.,-1.)); +#284831 = ORIENTED_EDGE('',*,*,#284832,.T.); +#284832 = EDGE_CURVE('',#284825,#284825,#284833,.T.); +#284833 = CIRCLE('',#284834,0.137255); +#284834 = AXIS2_PLACEMENT_3D('',#284835,#284836,#284837); +#284835 = CARTESIAN_POINT('',(133.4,-80.4,-3.5E-02)); +#284836 = DIRECTION('',(0.,0.,1.)); +#284837 = DIRECTION('',(1.,0.,-0.)); +#284838 = ORIENTED_EDGE('',*,*,#284822,.F.); +#284839 = ORIENTED_EDGE('',*,*,#284840,.F.); +#284840 = EDGE_CURVE('',#284823,#284823,#284841,.T.); +#284841 = CIRCLE('',#284842,0.137255); +#284842 = AXIS2_PLACEMENT_3D('',#284843,#284844,#284845); +#284843 = CARTESIAN_POINT('',(133.4,-80.4,0.)); +#284844 = DIRECTION('',(0.,0.,1.)); +#284845 = DIRECTION('',(1.,0.,-0.)); +#284846 = CYLINDRICAL_SURFACE('',#284847,0.137255); +#284847 = AXIS2_PLACEMENT_3D('',#284848,#284849,#284850); +#284848 = CARTESIAN_POINT('',(133.4,-80.4,0.)); +#284849 = DIRECTION('',(0.,0.,1.)); +#284850 = DIRECTION('',(1.,0.,-0.)); +#284851 = ADVANCED_FACE('',(#284852,#284878),#284881,.F.); +#284852 = FACE_BOUND('',#284853,.F.); +#284853 = EDGE_LOOP('',(#284854,#284855,#284856,#284857,#284858,#284859, + #284860,#284861,#284862,#284863,#284864,#284865,#284866,#284867, + #284868,#284869,#284870,#284871,#284872,#284873,#284874,#284875, + #284876,#284877)); +#284854 = ORIENTED_EDGE('',*,*,#284100,.T.); +#284855 = ORIENTED_EDGE('',*,*,#284131,.T.); +#284856 = ORIENTED_EDGE('',*,*,#284162,.T.); +#284857 = ORIENTED_EDGE('',*,*,#284193,.T.); +#284858 = ORIENTED_EDGE('',*,*,#284224,.T.); +#284859 = ORIENTED_EDGE('',*,*,#284255,.T.); +#284860 = ORIENTED_EDGE('',*,*,#284286,.T.); +#284861 = ORIENTED_EDGE('',*,*,#284317,.T.); +#284862 = ORIENTED_EDGE('',*,*,#284348,.T.); +#284863 = ORIENTED_EDGE('',*,*,#284379,.T.); +#284864 = ORIENTED_EDGE('',*,*,#284410,.T.); +#284865 = ORIENTED_EDGE('',*,*,#284442,.T.); +#284866 = ORIENTED_EDGE('',*,*,#284474,.T.); +#284867 = ORIENTED_EDGE('',*,*,#284505,.T.); +#284868 = ORIENTED_EDGE('',*,*,#284536,.T.); +#284869 = ORIENTED_EDGE('',*,*,#284567,.T.); +#284870 = ORIENTED_EDGE('',*,*,#284598,.T.); +#284871 = ORIENTED_EDGE('',*,*,#284629,.T.); +#284872 = ORIENTED_EDGE('',*,*,#284660,.T.); +#284873 = ORIENTED_EDGE('',*,*,#284691,.T.); +#284874 = ORIENTED_EDGE('',*,*,#284722,.T.); +#284875 = ORIENTED_EDGE('',*,*,#284753,.T.); +#284876 = ORIENTED_EDGE('',*,*,#284785,.T.); +#284877 = ORIENTED_EDGE('',*,*,#284808,.T.); +#284878 = FACE_BOUND('',#284879,.F.); +#284879 = EDGE_LOOP('',(#284880)); +#284880 = ORIENTED_EDGE('',*,*,#284840,.T.); +#284881 = PLANE('',#284882); +#284882 = AXIS2_PLACEMENT_3D('',#284883,#284884,#284885); +#284883 = CARTESIAN_POINT('',(0.,0.,0.)); +#284884 = DIRECTION('',(-0.,-0.,-1.)); +#284885 = DIRECTION('',(-1.,0.,0.)); +#284886 = ADVANCED_FACE('',(#284887,#284913),#284916,.T.); +#284887 = FACE_BOUND('',#284888,.T.); +#284888 = EDGE_LOOP('',(#284889,#284890,#284891,#284892,#284893,#284894, + #284895,#284896,#284897,#284898,#284899,#284900,#284901,#284902, + #284903,#284904,#284905,#284906,#284907,#284908,#284909,#284910, + #284911,#284912)); +#284889 = ORIENTED_EDGE('',*,*,#284084,.T.); +#284890 = ORIENTED_EDGE('',*,*,#284115,.T.); +#284891 = ORIENTED_EDGE('',*,*,#284146,.T.); +#284892 = ORIENTED_EDGE('',*,*,#284177,.T.); +#284893 = ORIENTED_EDGE('',*,*,#284208,.T.); +#284894 = ORIENTED_EDGE('',*,*,#284239,.T.); +#284895 = ORIENTED_EDGE('',*,*,#284270,.T.); +#284896 = ORIENTED_EDGE('',*,*,#284301,.T.); +#284897 = ORIENTED_EDGE('',*,*,#284332,.T.); +#284898 = ORIENTED_EDGE('',*,*,#284363,.T.); +#284899 = ORIENTED_EDGE('',*,*,#284394,.T.); +#284900 = ORIENTED_EDGE('',*,*,#284425,.T.); +#284901 = ORIENTED_EDGE('',*,*,#284458,.T.); +#284902 = ORIENTED_EDGE('',*,*,#284489,.T.); +#284903 = ORIENTED_EDGE('',*,*,#284520,.T.); +#284904 = ORIENTED_EDGE('',*,*,#284551,.T.); +#284905 = ORIENTED_EDGE('',*,*,#284582,.T.); +#284906 = ORIENTED_EDGE('',*,*,#284613,.T.); +#284907 = ORIENTED_EDGE('',*,*,#284644,.T.); +#284908 = ORIENTED_EDGE('',*,*,#284675,.T.); +#284909 = ORIENTED_EDGE('',*,*,#284706,.T.); +#284910 = ORIENTED_EDGE('',*,*,#284737,.T.); +#284911 = ORIENTED_EDGE('',*,*,#284768,.T.); +#284912 = ORIENTED_EDGE('',*,*,#284801,.T.); +#284913 = FACE_BOUND('',#284914,.T.); +#284914 = EDGE_LOOP('',(#284915)); +#284915 = ORIENTED_EDGE('',*,*,#284832,.T.); +#284916 = PLANE('',#284917); +#284917 = AXIS2_PLACEMENT_3D('',#284918,#284919,#284920); +#284918 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#284919 = DIRECTION('',(-0.,-0.,-1.)); +#284920 = DIRECTION('',(-1.,0.,0.)); +#284921 = MANIFOLD_SOLID_BREP('',#284922); +#284922 = CLOSED_SHELL('',(#284923,#284965,#284996,#285027,#285058, + #285089,#285120,#285142,#285157)); +#284923 = ADVANCED_FACE('',(#284924),#284960,.T.); +#284924 = FACE_BOUND('',#284925,.T.); +#284925 = EDGE_LOOP('',(#284926,#284936,#284945,#284953)); +#284926 = ORIENTED_EDGE('',*,*,#284927,.T.); +#284927 = EDGE_CURVE('',#284928,#284930,#284932,.T.); +#284928 = VERTEX_POINT('',#284929); +#284929 = CARTESIAN_POINT('',(147.444443,-157.466853,1.51)); +#284930 = VERTEX_POINT('',#284931); +#284931 = CARTESIAN_POINT('',(147.444443,-157.466853,1.545)); +#284932 = LINE('',#284933,#284934); +#284933 = CARTESIAN_POINT('',(147.444443,-157.466853,1.51)); +#284934 = VECTOR('',#284935,1.); +#284935 = DIRECTION('',(0.,0.,1.)); +#284936 = ORIENTED_EDGE('',*,*,#284937,.T.); +#284937 = EDGE_CURVE('',#284930,#284938,#284940,.T.); +#284938 = VERTEX_POINT('',#284939); +#284939 = CARTESIAN_POINT('',(147.583147,-157.605557,1.545)); +#284940 = CIRCLE('',#284941,0.10000001929); +#284941 = AXIS2_PLACEMENT_3D('',#284942,#284943,#284944); +#284942 = CARTESIAN_POINT('',(147.5,-157.55,1.545)); +#284943 = DIRECTION('',(0.,0.,-1.)); +#284944 = DIRECTION('',(-0.555569892831,0.83146983961,0.)); +#284945 = ORIENTED_EDGE('',*,*,#284946,.F.); +#284946 = EDGE_CURVE('',#284947,#284938,#284949,.T.); +#284947 = VERTEX_POINT('',#284948); +#284948 = CARTESIAN_POINT('',(147.583147,-157.605557,1.51)); +#284949 = LINE('',#284950,#284951); +#284950 = CARTESIAN_POINT('',(147.583147,-157.605557,1.51)); +#284951 = VECTOR('',#284952,1.); +#284952 = DIRECTION('',(0.,0.,1.)); +#284953 = ORIENTED_EDGE('',*,*,#284954,.F.); +#284954 = EDGE_CURVE('',#284928,#284947,#284955,.T.); +#284955 = CIRCLE('',#284956,0.10000001929); +#284956 = AXIS2_PLACEMENT_3D('',#284957,#284958,#284959); +#284957 = CARTESIAN_POINT('',(147.5,-157.55,1.51)); +#284958 = DIRECTION('',(0.,0.,-1.)); +#284959 = DIRECTION('',(-0.555569892831,0.83146983961,0.)); +#284960 = CYLINDRICAL_SURFACE('',#284961,0.10000001929); +#284961 = AXIS2_PLACEMENT_3D('',#284962,#284963,#284964); +#284962 = CARTESIAN_POINT('',(147.5,-157.55,1.51)); +#284963 = DIRECTION('',(0.,0.,-1.)); +#284964 = DIRECTION('',(-0.555569892831,0.83146983961,0.)); +#284965 = ADVANCED_FACE('',(#284966),#284991,.T.); +#284966 = FACE_BOUND('',#284967,.T.); +#284967 = EDGE_LOOP('',(#284968,#284969,#284977,#284985)); +#284968 = ORIENTED_EDGE('',*,*,#284946,.T.); +#284969 = ORIENTED_EDGE('',*,*,#284970,.T.); +#284970 = EDGE_CURVE('',#284938,#284971,#284973,.T.); +#284971 = VERTEX_POINT('',#284972); +#284972 = CARTESIAN_POINT('',(146.755557,-158.433147,1.545)); +#284973 = LINE('',#284974,#284975); +#284974 = CARTESIAN_POINT('',(147.583147,-157.605557,1.545)); +#284975 = VECTOR('',#284976,1.); +#284976 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#284977 = ORIENTED_EDGE('',*,*,#284978,.F.); +#284978 = EDGE_CURVE('',#284979,#284971,#284981,.T.); +#284979 = VERTEX_POINT('',#284980); +#284980 = CARTESIAN_POINT('',(146.755557,-158.433147,1.51)); +#284981 = LINE('',#284982,#284983); +#284982 = CARTESIAN_POINT('',(146.755557,-158.433147,1.51)); +#284983 = VECTOR('',#284984,1.); +#284984 = DIRECTION('',(0.,0.,1.)); +#284985 = ORIENTED_EDGE('',*,*,#284986,.F.); +#284986 = EDGE_CURVE('',#284947,#284979,#284987,.T.); +#284987 = LINE('',#284988,#284989); +#284988 = CARTESIAN_POINT('',(147.583147,-157.605557,1.51)); +#284989 = VECTOR('',#284990,1.); +#284990 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#284991 = PLANE('',#284992); +#284992 = AXIS2_PLACEMENT_3D('',#284993,#284994,#284995); +#284993 = CARTESIAN_POINT('',(147.583147,-157.605557,1.51)); +#284994 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#284995 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#284996 = ADVANCED_FACE('',(#284997),#285022,.T.); +#284997 = FACE_BOUND('',#284998,.T.); +#284998 = EDGE_LOOP('',(#284999,#285000,#285008,#285016)); +#284999 = ORIENTED_EDGE('',*,*,#284978,.T.); +#285000 = ORIENTED_EDGE('',*,*,#285001,.T.); +#285001 = EDGE_CURVE('',#284971,#285002,#285004,.T.); +#285002 = VERTEX_POINT('',#285003); +#285003 = CARTESIAN_POINT('',(146.719509,-158.448079,1.545)); +#285004 = LINE('',#285005,#285006); +#285005 = CARTESIAN_POINT('',(146.755557,-158.433147,1.545)); +#285006 = VECTOR('',#285007,1.); +#285007 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#285008 = ORIENTED_EDGE('',*,*,#285009,.F.); +#285009 = EDGE_CURVE('',#285010,#285002,#285012,.T.); +#285010 = VERTEX_POINT('',#285011); +#285011 = CARTESIAN_POINT('',(146.719509,-158.448079,1.51)); +#285012 = LINE('',#285013,#285014); +#285013 = CARTESIAN_POINT('',(146.719509,-158.448079,1.51)); +#285014 = VECTOR('',#285015,1.); +#285015 = DIRECTION('',(0.,0.,1.)); +#285016 = ORIENTED_EDGE('',*,*,#285017,.F.); +#285017 = EDGE_CURVE('',#284979,#285010,#285018,.T.); +#285018 = LINE('',#285019,#285020); +#285019 = CARTESIAN_POINT('',(146.755557,-158.433147,1.51)); +#285020 = VECTOR('',#285021,1.); +#285021 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#285022 = PLANE('',#285023); +#285023 = AXIS2_PLACEMENT_3D('',#285024,#285025,#285026); +#285024 = CARTESIAN_POINT('',(146.755557,-158.433147,1.51)); +#285025 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#285026 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#285027 = ADVANCED_FACE('',(#285028),#285053,.T.); +#285028 = FACE_BOUND('',#285029,.T.); +#285029 = EDGE_LOOP('',(#285030,#285031,#285039,#285047)); +#285030 = ORIENTED_EDGE('',*,*,#285009,.T.); +#285031 = ORIENTED_EDGE('',*,*,#285032,.T.); +#285032 = EDGE_CURVE('',#285002,#285033,#285035,.T.); +#285033 = VERTEX_POINT('',#285034); +#285034 = CARTESIAN_POINT('',(142.1075,-158.448079,1.545)); +#285035 = LINE('',#285036,#285037); +#285036 = CARTESIAN_POINT('',(146.719509,-158.448079,1.545)); +#285037 = VECTOR('',#285038,1.); +#285038 = DIRECTION('',(-1.,0.,0.)); +#285039 = ORIENTED_EDGE('',*,*,#285040,.F.); +#285040 = EDGE_CURVE('',#285041,#285033,#285043,.T.); +#285041 = VERTEX_POINT('',#285042); +#285042 = CARTESIAN_POINT('',(142.1075,-158.448079,1.51)); +#285043 = LINE('',#285044,#285045); +#285044 = CARTESIAN_POINT('',(142.1075,-158.448079,1.51)); +#285045 = VECTOR('',#285046,1.); +#285046 = DIRECTION('',(0.,0.,1.)); +#285047 = ORIENTED_EDGE('',*,*,#285048,.F.); +#285048 = EDGE_CURVE('',#285010,#285041,#285049,.T.); +#285049 = LINE('',#285050,#285051); +#285050 = CARTESIAN_POINT('',(146.719509,-158.448079,1.51)); +#285051 = VECTOR('',#285052,1.); +#285052 = DIRECTION('',(-1.,0.,0.)); +#285053 = PLANE('',#285054); +#285054 = AXIS2_PLACEMENT_3D('',#285055,#285056,#285057); +#285055 = CARTESIAN_POINT('',(146.719509,-158.448079,1.51)); +#285056 = DIRECTION('',(0.,-1.,0.)); +#285057 = DIRECTION('',(-1.,0.,0.)); +#285058 = ADVANCED_FACE('',(#285059),#285084,.T.); +#285059 = FACE_BOUND('',#285060,.T.); +#285060 = EDGE_LOOP('',(#285061,#285062,#285070,#285078)); +#285061 = ORIENTED_EDGE('',*,*,#285040,.T.); +#285062 = ORIENTED_EDGE('',*,*,#285063,.T.); +#285063 = EDGE_CURVE('',#285033,#285064,#285066,.T.); +#285064 = VERTEX_POINT('',#285065); +#285065 = CARTESIAN_POINT('',(142.1075,-158.25,1.545)); +#285066 = LINE('',#285067,#285068); +#285067 = CARTESIAN_POINT('',(142.1075,-158.448079,1.545)); +#285068 = VECTOR('',#285069,1.); +#285069 = DIRECTION('',(0.,1.,0.)); +#285070 = ORIENTED_EDGE('',*,*,#285071,.F.); +#285071 = EDGE_CURVE('',#285072,#285064,#285074,.T.); +#285072 = VERTEX_POINT('',#285073); +#285073 = CARTESIAN_POINT('',(142.1075,-158.25,1.51)); +#285074 = LINE('',#285075,#285076); +#285075 = CARTESIAN_POINT('',(142.1075,-158.25,1.51)); +#285076 = VECTOR('',#285077,1.); +#285077 = DIRECTION('',(0.,0.,1.)); +#285078 = ORIENTED_EDGE('',*,*,#285079,.F.); +#285079 = EDGE_CURVE('',#285041,#285072,#285080,.T.); +#285080 = LINE('',#285081,#285082); +#285081 = CARTESIAN_POINT('',(142.1075,-158.448079,1.51)); +#285082 = VECTOR('',#285083,1.); +#285083 = DIRECTION('',(0.,1.,0.)); +#285084 = PLANE('',#285085); +#285085 = AXIS2_PLACEMENT_3D('',#285086,#285087,#285088); +#285086 = CARTESIAN_POINT('',(142.1075,-158.448079,1.51)); +#285087 = DIRECTION('',(-1.,0.,0.)); +#285088 = DIRECTION('',(0.,1.,0.)); +#285089 = ADVANCED_FACE('',(#285090),#285115,.T.); +#285090 = FACE_BOUND('',#285091,.T.); +#285091 = EDGE_LOOP('',(#285092,#285093,#285101,#285109)); +#285092 = ORIENTED_EDGE('',*,*,#285071,.T.); +#285093 = ORIENTED_EDGE('',*,*,#285094,.T.); +#285094 = EDGE_CURVE('',#285064,#285095,#285097,.T.); +#285095 = VERTEX_POINT('',#285096); +#285096 = CARTESIAN_POINT('',(146.658578,-158.25,1.545)); +#285097 = LINE('',#285098,#285099); +#285098 = CARTESIAN_POINT('',(142.1075,-158.25,1.545)); +#285099 = VECTOR('',#285100,1.); +#285100 = DIRECTION('',(1.,0.,0.)); +#285101 = ORIENTED_EDGE('',*,*,#285102,.F.); +#285102 = EDGE_CURVE('',#285103,#285095,#285105,.T.); +#285103 = VERTEX_POINT('',#285104); +#285104 = CARTESIAN_POINT('',(146.658578,-158.25,1.51)); +#285105 = LINE('',#285106,#285107); +#285106 = CARTESIAN_POINT('',(146.658578,-158.25,1.51)); +#285107 = VECTOR('',#285108,1.); +#285108 = DIRECTION('',(0.,0.,1.)); +#285109 = ORIENTED_EDGE('',*,*,#285110,.F.); +#285110 = EDGE_CURVE('',#285072,#285103,#285111,.T.); +#285111 = LINE('',#285112,#285113); +#285112 = CARTESIAN_POINT('',(142.1075,-158.25,1.51)); +#285113 = VECTOR('',#285114,1.); +#285114 = DIRECTION('',(1.,0.,0.)); +#285115 = PLANE('',#285116); +#285116 = AXIS2_PLACEMENT_3D('',#285117,#285118,#285119); +#285117 = CARTESIAN_POINT('',(142.1075,-158.25,1.51)); +#285118 = DIRECTION('',(0.,1.,0.)); +#285119 = DIRECTION('',(1.,0.,0.)); +#285120 = ADVANCED_FACE('',(#285121),#285137,.T.); +#285121 = FACE_BOUND('',#285122,.T.); +#285122 = EDGE_LOOP('',(#285123,#285124,#285130,#285131)); +#285123 = ORIENTED_EDGE('',*,*,#285102,.T.); +#285124 = ORIENTED_EDGE('',*,*,#285125,.T.); +#285125 = EDGE_CURVE('',#285095,#284930,#285126,.T.); +#285126 = LINE('',#285127,#285128); +#285127 = CARTESIAN_POINT('',(146.658578,-158.25,1.545)); +#285128 = VECTOR('',#285129,1.); +#285129 = DIRECTION('',(0.708330639693,0.705880800753,0.)); +#285130 = ORIENTED_EDGE('',*,*,#284927,.F.); +#285131 = ORIENTED_EDGE('',*,*,#285132,.F.); +#285132 = EDGE_CURVE('',#285103,#284928,#285133,.T.); +#285133 = LINE('',#285134,#285135); +#285134 = CARTESIAN_POINT('',(146.658578,-158.25,1.51)); +#285135 = VECTOR('',#285136,1.); +#285136 = DIRECTION('',(0.708330639693,0.705880800753,0.)); +#285137 = PLANE('',#285138); +#285138 = AXIS2_PLACEMENT_3D('',#285139,#285140,#285141); +#285139 = CARTESIAN_POINT('',(146.658578,-158.25,1.51)); +#285140 = DIRECTION('',(-0.705880800753,0.708330639693,0.)); +#285141 = DIRECTION('',(0.708330639693,0.705880800753,0.)); +#285142 = ADVANCED_FACE('',(#285143),#285152,.F.); +#285143 = FACE_BOUND('',#285144,.T.); +#285144 = EDGE_LOOP('',(#285145,#285146,#285147,#285148,#285149,#285150, + #285151)); +#285145 = ORIENTED_EDGE('',*,*,#284954,.T.); +#285146 = ORIENTED_EDGE('',*,*,#284986,.T.); +#285147 = ORIENTED_EDGE('',*,*,#285017,.T.); +#285148 = ORIENTED_EDGE('',*,*,#285048,.T.); +#285149 = ORIENTED_EDGE('',*,*,#285079,.T.); +#285150 = ORIENTED_EDGE('',*,*,#285110,.T.); +#285151 = ORIENTED_EDGE('',*,*,#285132,.T.); +#285152 = PLANE('',#285153); +#285153 = AXIS2_PLACEMENT_3D('',#285154,#285155,#285156); +#285154 = CARTESIAN_POINT('',(0.,0.,1.51)); +#285155 = DIRECTION('',(0.,0.,1.)); +#285156 = DIRECTION('',(1.,0.,-0.)); +#285157 = ADVANCED_FACE('',(#285158),#285167,.T.); +#285158 = FACE_BOUND('',#285159,.F.); +#285159 = EDGE_LOOP('',(#285160,#285161,#285162,#285163,#285164,#285165, + #285166)); +#285160 = ORIENTED_EDGE('',*,*,#284937,.T.); +#285161 = ORIENTED_EDGE('',*,*,#284970,.T.); +#285162 = ORIENTED_EDGE('',*,*,#285001,.T.); +#285163 = ORIENTED_EDGE('',*,*,#285032,.T.); +#285164 = ORIENTED_EDGE('',*,*,#285063,.T.); +#285165 = ORIENTED_EDGE('',*,*,#285094,.T.); +#285166 = ORIENTED_EDGE('',*,*,#285125,.T.); +#285167 = PLANE('',#285168); +#285168 = AXIS2_PLACEMENT_3D('',#285169,#285170,#285171); +#285169 = CARTESIAN_POINT('',(0.,0.,1.545)); +#285170 = DIRECTION('',(0.,0.,1.)); +#285171 = DIRECTION('',(1.,0.,-0.)); +#285172 = MANIFOLD_SOLID_BREP('',#285173); +#285173 = CLOSED_SHELL('',(#285174,#285214,#285245,#285276,#285298, + #285310)); +#285174 = ADVANCED_FACE('',(#285175),#285209,.T.); +#285175 = FACE_BOUND('',#285176,.T.); +#285176 = EDGE_LOOP('',(#285177,#285187,#285195,#285203)); +#285177 = ORIENTED_EDGE('',*,*,#285178,.T.); +#285178 = EDGE_CURVE('',#285179,#285181,#285183,.T.); +#285179 = VERTEX_POINT('',#285180); +#285180 = CARTESIAN_POINT('',(133.4675,-158.248147,1.51)); +#285181 = VERTEX_POINT('',#285182); +#285182 = CARTESIAN_POINT('',(133.4675,-158.248147,1.545)); +#285183 = LINE('',#285184,#285185); +#285184 = CARTESIAN_POINT('',(133.4675,-158.248147,1.51)); +#285185 = VECTOR('',#285186,1.); +#285186 = DIRECTION('',(0.,0.,1.)); +#285187 = ORIENTED_EDGE('',*,*,#285188,.T.); +#285188 = EDGE_CURVE('',#285181,#285189,#285191,.T.); +#285189 = VERTEX_POINT('',#285190); +#285190 = CARTESIAN_POINT('',(133.4675,-158.05,1.545)); +#285191 = LINE('',#285192,#285193); +#285192 = CARTESIAN_POINT('',(133.4675,-158.248147,1.545)); +#285193 = VECTOR('',#285194,1.); +#285194 = DIRECTION('',(0.,1.,0.)); +#285195 = ORIENTED_EDGE('',*,*,#285196,.F.); +#285196 = EDGE_CURVE('',#285197,#285189,#285199,.T.); +#285197 = VERTEX_POINT('',#285198); +#285198 = CARTESIAN_POINT('',(133.4675,-158.05,1.51)); +#285199 = LINE('',#285200,#285201); +#285200 = CARTESIAN_POINT('',(133.4675,-158.05,1.51)); +#285201 = VECTOR('',#285202,1.); +#285202 = DIRECTION('',(0.,0.,1.)); +#285203 = ORIENTED_EDGE('',*,*,#285204,.F.); +#285204 = EDGE_CURVE('',#285179,#285197,#285205,.T.); +#285205 = LINE('',#285206,#285207); +#285206 = CARTESIAN_POINT('',(133.4675,-158.248147,1.51)); +#285207 = VECTOR('',#285208,1.); +#285208 = DIRECTION('',(0.,1.,0.)); +#285209 = PLANE('',#285210); +#285210 = AXIS2_PLACEMENT_3D('',#285211,#285212,#285213); +#285211 = CARTESIAN_POINT('',(133.4675,-158.248147,1.51)); +#285212 = DIRECTION('',(-1.,0.,0.)); +#285213 = DIRECTION('',(0.,1.,0.)); +#285214 = ADVANCED_FACE('',(#285215),#285240,.T.); +#285215 = FACE_BOUND('',#285216,.T.); +#285216 = EDGE_LOOP('',(#285217,#285218,#285226,#285234)); +#285217 = ORIENTED_EDGE('',*,*,#285196,.T.); +#285218 = ORIENTED_EDGE('',*,*,#285219,.T.); +#285219 = EDGE_CURVE('',#285189,#285220,#285222,.T.); +#285220 = VERTEX_POINT('',#285221); +#285221 = CARTESIAN_POINT('',(141.5325,-158.05,1.545)); +#285222 = LINE('',#285223,#285224); +#285223 = CARTESIAN_POINT('',(133.4675,-158.05,1.545)); +#285224 = VECTOR('',#285225,1.); +#285225 = DIRECTION('',(1.,0.,0.)); +#285226 = ORIENTED_EDGE('',*,*,#285227,.F.); +#285227 = EDGE_CURVE('',#285228,#285220,#285230,.T.); +#285228 = VERTEX_POINT('',#285229); +#285229 = CARTESIAN_POINT('',(141.5325,-158.05,1.51)); +#285230 = LINE('',#285231,#285232); +#285231 = CARTESIAN_POINT('',(141.5325,-158.05,1.51)); +#285232 = VECTOR('',#285233,1.); +#285233 = DIRECTION('',(0.,0.,1.)); +#285234 = ORIENTED_EDGE('',*,*,#285235,.F.); +#285235 = EDGE_CURVE('',#285197,#285228,#285236,.T.); +#285236 = LINE('',#285237,#285238); +#285237 = CARTESIAN_POINT('',(133.4675,-158.05,1.51)); +#285238 = VECTOR('',#285239,1.); +#285239 = DIRECTION('',(1.,0.,0.)); +#285240 = PLANE('',#285241); +#285241 = AXIS2_PLACEMENT_3D('',#285242,#285243,#285244); +#285242 = CARTESIAN_POINT('',(133.4675,-158.05,1.51)); +#285243 = DIRECTION('',(0.,1.,0.)); +#285244 = DIRECTION('',(1.,0.,0.)); +#285245 = ADVANCED_FACE('',(#285246),#285271,.T.); +#285246 = FACE_BOUND('',#285247,.T.); +#285247 = EDGE_LOOP('',(#285248,#285249,#285257,#285265)); +#285248 = ORIENTED_EDGE('',*,*,#285227,.T.); +#285249 = ORIENTED_EDGE('',*,*,#285250,.T.); +#285250 = EDGE_CURVE('',#285220,#285251,#285253,.T.); +#285251 = VERTEX_POINT('',#285252); +#285252 = CARTESIAN_POINT('',(141.5325,-158.249945,1.545)); +#285253 = LINE('',#285254,#285255); +#285254 = CARTESIAN_POINT('',(141.5325,-158.05,1.545)); +#285255 = VECTOR('',#285256,1.); +#285256 = DIRECTION('',(0.,-1.,0.)); +#285257 = ORIENTED_EDGE('',*,*,#285258,.F.); +#285258 = EDGE_CURVE('',#285259,#285251,#285261,.T.); +#285259 = VERTEX_POINT('',#285260); +#285260 = CARTESIAN_POINT('',(141.5325,-158.249945,1.51)); +#285261 = LINE('',#285262,#285263); +#285262 = CARTESIAN_POINT('',(141.5325,-158.249945,1.51)); +#285263 = VECTOR('',#285264,1.); +#285264 = DIRECTION('',(0.,0.,1.)); +#285265 = ORIENTED_EDGE('',*,*,#285266,.F.); +#285266 = EDGE_CURVE('',#285228,#285259,#285267,.T.); +#285267 = LINE('',#285268,#285269); +#285268 = CARTESIAN_POINT('',(141.5325,-158.05,1.51)); +#285269 = VECTOR('',#285270,1.); +#285270 = DIRECTION('',(0.,-1.,0.)); +#285271 = PLANE('',#285272); +#285272 = AXIS2_PLACEMENT_3D('',#285273,#285274,#285275); +#285273 = CARTESIAN_POINT('',(141.5325,-158.05,1.51)); +#285274 = DIRECTION('',(1.,0.,-0.)); +#285275 = DIRECTION('',(0.,-1.,0.)); +#285276 = ADVANCED_FACE('',(#285277),#285293,.T.); +#285277 = FACE_BOUND('',#285278,.T.); +#285278 = EDGE_LOOP('',(#285279,#285280,#285286,#285287)); +#285279 = ORIENTED_EDGE('',*,*,#285258,.T.); +#285280 = ORIENTED_EDGE('',*,*,#285281,.T.); +#285281 = EDGE_CURVE('',#285251,#285181,#285282,.T.); +#285282 = LINE('',#285283,#285284); +#285283 = CARTESIAN_POINT('',(141.5325,-158.249945,1.545)); +#285284 = VECTOR('',#285285,1.); +#285285 = DIRECTION('',(-0.999999975149,2.229386181434E-04,0.)); +#285286 = ORIENTED_EDGE('',*,*,#285178,.F.); +#285287 = ORIENTED_EDGE('',*,*,#285288,.F.); +#285288 = EDGE_CURVE('',#285259,#285179,#285289,.T.); +#285289 = LINE('',#285290,#285291); +#285290 = CARTESIAN_POINT('',(141.5325,-158.249945,1.51)); +#285291 = VECTOR('',#285292,1.); +#285292 = DIRECTION('',(-0.999999975149,2.229386181434E-04,0.)); +#285293 = PLANE('',#285294); +#285294 = AXIS2_PLACEMENT_3D('',#285295,#285296,#285297); +#285295 = CARTESIAN_POINT('',(141.5325,-158.249945,1.51)); +#285296 = DIRECTION('',(-2.229386181434E-04,-0.999999975149,0.)); +#285297 = DIRECTION('',(-0.999999975149,2.229386181434E-04,0.)); +#285298 = ADVANCED_FACE('',(#285299),#285305,.F.); +#285299 = FACE_BOUND('',#285300,.T.); +#285300 = EDGE_LOOP('',(#285301,#285302,#285303,#285304)); +#285301 = ORIENTED_EDGE('',*,*,#285204,.T.); +#285302 = ORIENTED_EDGE('',*,*,#285235,.T.); +#285303 = ORIENTED_EDGE('',*,*,#285266,.T.); +#285304 = ORIENTED_EDGE('',*,*,#285288,.T.); +#285305 = PLANE('',#285306); +#285306 = AXIS2_PLACEMENT_3D('',#285307,#285308,#285309); +#285307 = CARTESIAN_POINT('',(0.,0.,1.51)); +#285308 = DIRECTION('',(0.,0.,1.)); +#285309 = DIRECTION('',(1.,0.,-0.)); +#285310 = ADVANCED_FACE('',(#285311),#285317,.T.); +#285311 = FACE_BOUND('',#285312,.F.); +#285312 = EDGE_LOOP('',(#285313,#285314,#285315,#285316)); +#285313 = ORIENTED_EDGE('',*,*,#285188,.T.); +#285314 = ORIENTED_EDGE('',*,*,#285219,.T.); +#285315 = ORIENTED_EDGE('',*,*,#285250,.T.); +#285316 = ORIENTED_EDGE('',*,*,#285281,.T.); +#285317 = PLANE('',#285318); +#285318 = AXIS2_PLACEMENT_3D('',#285319,#285320,#285321); +#285319 = CARTESIAN_POINT('',(0.,0.,1.545)); +#285320 = DIRECTION('',(0.,0.,1.)); +#285321 = DIRECTION('',(1.,0.,-0.)); +#285322 = MANIFOLD_SOLID_BREP('',#285323); +#285323 = CLOSED_SHELL('',(#285324,#285366,#285397,#285428,#285459, + #285490,#285521,#285552,#285583,#285614,#285645,#285678,#285700, + #285720)); +#285324 = ADVANCED_FACE('',(#285325),#285361,.T.); +#285325 = FACE_BOUND('',#285326,.T.); +#285326 = EDGE_LOOP('',(#285327,#285337,#285346,#285354)); +#285327 = ORIENTED_EDGE('',*,*,#285328,.T.); +#285328 = EDGE_CURVE('',#285329,#285331,#285333,.T.); +#285329 = VERTEX_POINT('',#285330); +#285330 = CARTESIAN_POINT('',(128.901921,-155.380491,1.51)); +#285331 = VERTEX_POINT('',#285332); +#285332 = CARTESIAN_POINT('',(128.901921,-155.380491,1.545)); +#285333 = LINE('',#285334,#285335); +#285334 = CARTESIAN_POINT('',(128.901921,-155.380491,1.51)); +#285335 = VECTOR('',#285336,1.); +#285336 = DIRECTION('',(0.,0.,1.)); +#285337 = ORIENTED_EDGE('',*,*,#285338,.T.); +#285338 = EDGE_CURVE('',#285331,#285339,#285341,.T.); +#285339 = VERTEX_POINT('',#285340); +#285340 = CARTESIAN_POINT('',(128.980491,-155.301921,1.545)); +#285341 = CIRCLE('',#285342,0.100002891901); +#285342 = AXIS2_PLACEMENT_3D('',#285343,#285344,#285345); +#285343 = CARTESIAN_POINT('',(129.00000207103,-155.400002071,1.545)); +#285344 = DIRECTION('',(0.,0.,-1.)); +#285345 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#285346 = ORIENTED_EDGE('',*,*,#285347,.F.); +#285347 = EDGE_CURVE('',#285348,#285339,#285350,.T.); +#285348 = VERTEX_POINT('',#285349); +#285349 = CARTESIAN_POINT('',(128.980491,-155.301921,1.51)); +#285350 = LINE('',#285351,#285352); +#285351 = CARTESIAN_POINT('',(128.980491,-155.301921,1.51)); +#285352 = VECTOR('',#285353,1.); +#285353 = DIRECTION('',(0.,0.,1.)); +#285354 = ORIENTED_EDGE('',*,*,#285355,.F.); +#285355 = EDGE_CURVE('',#285329,#285348,#285356,.T.); +#285356 = CIRCLE('',#285357,0.100002891901); +#285357 = AXIS2_PLACEMENT_3D('',#285358,#285359,#285360); +#285358 = CARTESIAN_POINT('',(129.00000207103,-155.400002071,1.51)); +#285359 = DIRECTION('',(0.,0.,-1.)); +#285360 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#285361 = CYLINDRICAL_SURFACE('',#285362,0.100002891901); +#285362 = AXIS2_PLACEMENT_3D('',#285363,#285364,#285365); +#285363 = CARTESIAN_POINT('',(129.00000207103,-155.400002071,1.51)); +#285364 = DIRECTION('',(0.,0.,-1.)); +#285365 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#285366 = ADVANCED_FACE('',(#285367),#285392,.T.); +#285367 = FACE_BOUND('',#285368,.T.); +#285368 = EDGE_LOOP('',(#285369,#285370,#285378,#285386)); +#285369 = ORIENTED_EDGE('',*,*,#285347,.T.); +#285370 = ORIENTED_EDGE('',*,*,#285371,.T.); +#285371 = EDGE_CURVE('',#285339,#285372,#285374,.T.); +#285372 = VERTEX_POINT('',#285373); +#285373 = CARTESIAN_POINT('',(130.449509,-155.301921,1.545)); +#285374 = LINE('',#285375,#285376); +#285375 = CARTESIAN_POINT('',(128.980491,-155.301921,1.545)); +#285376 = VECTOR('',#285377,1.); +#285377 = DIRECTION('',(1.,0.,0.)); +#285378 = ORIENTED_EDGE('',*,*,#285379,.F.); +#285379 = EDGE_CURVE('',#285380,#285372,#285382,.T.); +#285380 = VERTEX_POINT('',#285381); +#285381 = CARTESIAN_POINT('',(130.449509,-155.301921,1.51)); +#285382 = LINE('',#285383,#285384); +#285383 = CARTESIAN_POINT('',(130.449509,-155.301921,1.51)); +#285384 = VECTOR('',#285385,1.); +#285385 = DIRECTION('',(0.,0.,1.)); +#285386 = ORIENTED_EDGE('',*,*,#285387,.F.); +#285387 = EDGE_CURVE('',#285348,#285380,#285388,.T.); +#285388 = LINE('',#285389,#285390); +#285389 = CARTESIAN_POINT('',(128.980491,-155.301921,1.51)); +#285390 = VECTOR('',#285391,1.); +#285391 = DIRECTION('',(1.,0.,0.)); +#285392 = PLANE('',#285393); +#285393 = AXIS2_PLACEMENT_3D('',#285394,#285395,#285396); +#285394 = CARTESIAN_POINT('',(128.980491,-155.301921,1.51)); +#285395 = DIRECTION('',(0.,1.,0.)); +#285396 = DIRECTION('',(1.,0.,0.)); +#285397 = ADVANCED_FACE('',(#285398),#285423,.T.); +#285398 = FACE_BOUND('',#285399,.T.); +#285399 = EDGE_LOOP('',(#285400,#285401,#285409,#285417)); +#285400 = ORIENTED_EDGE('',*,*,#285379,.T.); +#285401 = ORIENTED_EDGE('',*,*,#285402,.T.); +#285402 = EDGE_CURVE('',#285372,#285403,#285405,.T.); +#285403 = VERTEX_POINT('',#285404); +#285404 = CARTESIAN_POINT('',(130.485557,-155.316853,1.545)); +#285405 = LINE('',#285406,#285407); +#285406 = CARTESIAN_POINT('',(130.449509,-155.301921,1.545)); +#285407 = VECTOR('',#285408,1.); +#285408 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#285409 = ORIENTED_EDGE('',*,*,#285410,.F.); +#285410 = EDGE_CURVE('',#285411,#285403,#285413,.T.); +#285411 = VERTEX_POINT('',#285412); +#285412 = CARTESIAN_POINT('',(130.485557,-155.316853,1.51)); +#285413 = LINE('',#285414,#285415); +#285414 = CARTESIAN_POINT('',(130.485557,-155.316853,1.51)); +#285415 = VECTOR('',#285416,1.); +#285416 = DIRECTION('',(0.,0.,1.)); +#285417 = ORIENTED_EDGE('',*,*,#285418,.F.); +#285418 = EDGE_CURVE('',#285380,#285411,#285419,.T.); +#285419 = LINE('',#285420,#285421); +#285420 = CARTESIAN_POINT('',(130.449509,-155.301921,1.51)); +#285421 = VECTOR('',#285422,1.); +#285422 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#285423 = PLANE('',#285424); +#285424 = AXIS2_PLACEMENT_3D('',#285425,#285426,#285427); +#285425 = CARTESIAN_POINT('',(130.449509,-155.301921,1.51)); +#285426 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#285427 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#285428 = ADVANCED_FACE('',(#285429),#285454,.T.); +#285429 = FACE_BOUND('',#285430,.T.); +#285430 = EDGE_LOOP('',(#285431,#285432,#285440,#285448)); +#285431 = ORIENTED_EDGE('',*,*,#285410,.T.); +#285432 = ORIENTED_EDGE('',*,*,#285433,.T.); +#285433 = EDGE_CURVE('',#285403,#285434,#285436,.T.); +#285434 = VERTEX_POINT('',#285435); +#285435 = CARTESIAN_POINT('',(132.913776,-157.74266,1.545)); +#285436 = LINE('',#285437,#285438); +#285437 = CARTESIAN_POINT('',(130.485557,-155.316853,1.545)); +#285438 = VECTOR('',#285439,1.); +#285439 = DIRECTION('',(0.707458060227,-0.706755327549,0.)); +#285440 = ORIENTED_EDGE('',*,*,#285441,.F.); +#285441 = EDGE_CURVE('',#285442,#285434,#285444,.T.); +#285442 = VERTEX_POINT('',#285443); +#285443 = CARTESIAN_POINT('',(132.913776,-157.74266,1.51)); +#285444 = LINE('',#285445,#285446); +#285445 = CARTESIAN_POINT('',(132.913776,-157.74266,1.51)); +#285446 = VECTOR('',#285447,1.); +#285447 = DIRECTION('',(0.,0.,1.)); +#285448 = ORIENTED_EDGE('',*,*,#285449,.F.); +#285449 = EDGE_CURVE('',#285411,#285442,#285450,.T.); +#285450 = LINE('',#285451,#285452); +#285451 = CARTESIAN_POINT('',(130.485557,-155.316853,1.51)); +#285452 = VECTOR('',#285453,1.); +#285453 = DIRECTION('',(0.707458060227,-0.706755327549,0.)); +#285454 = PLANE('',#285455); +#285455 = AXIS2_PLACEMENT_3D('',#285456,#285457,#285458); +#285456 = CARTESIAN_POINT('',(130.485557,-155.316853,1.51)); +#285457 = DIRECTION('',(0.706755327549,0.707458060227,-0.)); +#285458 = DIRECTION('',(0.707458060227,-0.706755327549,0.)); +#285459 = ADVANCED_FACE('',(#285460),#285485,.T.); +#285460 = FACE_BOUND('',#285461,.T.); +#285461 = EDGE_LOOP('',(#285462,#285463,#285471,#285479)); +#285462 = ORIENTED_EDGE('',*,*,#285441,.T.); +#285463 = ORIENTED_EDGE('',*,*,#285464,.T.); +#285464 = EDGE_CURVE('',#285434,#285465,#285467,.T.); +#285465 = VERTEX_POINT('',#285466); +#285466 = CARTESIAN_POINT('',(132.894959,-157.812888,1.545)); +#285467 = LINE('',#285468,#285469); +#285468 = CARTESIAN_POINT('',(132.913776,-157.74266,1.545)); +#285469 = VECTOR('',#285470,1.); +#285470 = DIRECTION('',(-0.258812168171,-0.965927668931,0.)); +#285471 = ORIENTED_EDGE('',*,*,#285472,.F.); +#285472 = EDGE_CURVE('',#285473,#285465,#285475,.T.); +#285473 = VERTEX_POINT('',#285474); +#285474 = CARTESIAN_POINT('',(132.894959,-157.812888,1.51)); +#285475 = LINE('',#285476,#285477); +#285476 = CARTESIAN_POINT('',(132.894959,-157.812888,1.51)); +#285477 = VECTOR('',#285478,1.); +#285478 = DIRECTION('',(0.,0.,1.)); +#285479 = ORIENTED_EDGE('',*,*,#285480,.F.); +#285480 = EDGE_CURVE('',#285442,#285473,#285481,.T.); +#285481 = LINE('',#285482,#285483); +#285482 = CARTESIAN_POINT('',(132.913776,-157.74266,1.51)); +#285483 = VECTOR('',#285484,1.); +#285484 = DIRECTION('',(-0.258812168171,-0.965927668931,0.)); +#285485 = PLANE('',#285486); +#285486 = AXIS2_PLACEMENT_3D('',#285487,#285488,#285489); +#285487 = CARTESIAN_POINT('',(132.913776,-157.74266,1.51)); +#285488 = DIRECTION('',(0.965927668931,-0.258812168171,0.)); +#285489 = DIRECTION('',(-0.258812168171,-0.965927668931,0.)); +#285490 = ADVANCED_FACE('',(#285491),#285516,.T.); +#285491 = FACE_BOUND('',#285492,.T.); +#285492 = EDGE_LOOP('',(#285493,#285494,#285502,#285510)); +#285493 = ORIENTED_EDGE('',*,*,#285472,.T.); +#285494 = ORIENTED_EDGE('',*,*,#285495,.T.); +#285495 = EDGE_CURVE('',#285465,#285496,#285498,.T.); +#285496 = VERTEX_POINT('',#285497); +#285497 = CARTESIAN_POINT('',(132.8925,-157.850406,1.545)); +#285498 = LINE('',#285499,#285500); +#285499 = CARTESIAN_POINT('',(132.894959,-157.812888,1.545)); +#285500 = VECTOR('',#285501,1.); +#285501 = DIRECTION('',(-6.54015498369E-02,-0.997859026756,0.)); +#285502 = ORIENTED_EDGE('',*,*,#285503,.F.); +#285503 = EDGE_CURVE('',#285504,#285496,#285506,.T.); +#285504 = VERTEX_POINT('',#285505); +#285505 = CARTESIAN_POINT('',(132.8925,-157.850406,1.51)); +#285506 = LINE('',#285507,#285508); +#285507 = CARTESIAN_POINT('',(132.8925,-157.850406,1.51)); +#285508 = VECTOR('',#285509,1.); +#285509 = DIRECTION('',(0.,0.,1.)); +#285510 = ORIENTED_EDGE('',*,*,#285511,.F.); +#285511 = EDGE_CURVE('',#285473,#285504,#285512,.T.); +#285512 = LINE('',#285513,#285514); +#285513 = CARTESIAN_POINT('',(132.894959,-157.812888,1.51)); +#285514 = VECTOR('',#285515,1.); +#285515 = DIRECTION('',(-6.54015498369E-02,-0.997859026756,0.)); +#285516 = PLANE('',#285517); +#285517 = AXIS2_PLACEMENT_3D('',#285518,#285519,#285520); +#285518 = CARTESIAN_POINT('',(132.894959,-157.812888,1.51)); +#285519 = DIRECTION('',(0.997859026756,-6.54015498369E-02,0.)); +#285520 = DIRECTION('',(-6.54015498369E-02,-0.997859026756,0.)); +#285521 = ADVANCED_FACE('',(#285522),#285547,.T.); +#285522 = FACE_BOUND('',#285523,.T.); +#285523 = EDGE_LOOP('',(#285524,#285525,#285533,#285541)); +#285524 = ORIENTED_EDGE('',*,*,#285503,.T.); +#285525 = ORIENTED_EDGE('',*,*,#285526,.T.); +#285526 = EDGE_CURVE('',#285496,#285527,#285529,.T.); +#285527 = VERTEX_POINT('',#285528); +#285528 = CARTESIAN_POINT('',(132.8925,-158.001435,1.545)); +#285529 = LINE('',#285530,#285531); +#285530 = CARTESIAN_POINT('',(132.8925,-157.850406,1.545)); +#285531 = VECTOR('',#285532,1.); +#285532 = DIRECTION('',(0.,-1.,0.)); +#285533 = ORIENTED_EDGE('',*,*,#285534,.F.); +#285534 = EDGE_CURVE('',#285535,#285527,#285537,.T.); +#285535 = VERTEX_POINT('',#285536); +#285536 = CARTESIAN_POINT('',(132.8925,-158.001435,1.51)); +#285537 = LINE('',#285538,#285539); +#285538 = CARTESIAN_POINT('',(132.8925,-158.001435,1.51)); +#285539 = VECTOR('',#285540,1.); +#285540 = DIRECTION('',(0.,0.,1.)); +#285541 = ORIENTED_EDGE('',*,*,#285542,.F.); +#285542 = EDGE_CURVE('',#285504,#285535,#285543,.T.); +#285543 = LINE('',#285544,#285545); +#285544 = CARTESIAN_POINT('',(132.8925,-157.850406,1.51)); +#285545 = VECTOR('',#285546,1.); +#285546 = DIRECTION('',(0.,-1.,0.)); +#285547 = PLANE('',#285548); +#285548 = AXIS2_PLACEMENT_3D('',#285549,#285550,#285551); +#285549 = CARTESIAN_POINT('',(132.8925,-157.850406,1.51)); +#285550 = DIRECTION('',(1.,0.,-0.)); +#285551 = DIRECTION('',(0.,-1.,0.)); +#285552 = ADVANCED_FACE('',(#285553),#285578,.T.); +#285553 = FACE_BOUND('',#285554,.T.); +#285554 = EDGE_LOOP('',(#285555,#285556,#285564,#285572)); +#285555 = ORIENTED_EDGE('',*,*,#285534,.T.); +#285556 = ORIENTED_EDGE('',*,*,#285557,.T.); +#285557 = EDGE_CURVE('',#285527,#285558,#285560,.T.); +#285558 = VERTEX_POINT('',#285559); +#285559 = CARTESIAN_POINT('',(130.388578,-155.5,1.545)); +#285560 = LINE('',#285561,#285562); +#285561 = CARTESIAN_POINT('',(132.8925,-158.001435,1.545)); +#285562 = VECTOR('',#285563,1.); +#285563 = DIRECTION('',(-0.707458032348,0.706755355457,0.)); +#285564 = ORIENTED_EDGE('',*,*,#285565,.F.); +#285565 = EDGE_CURVE('',#285566,#285558,#285568,.T.); +#285566 = VERTEX_POINT('',#285567); +#285567 = CARTESIAN_POINT('',(130.388578,-155.5,1.51)); +#285568 = LINE('',#285569,#285570); +#285569 = CARTESIAN_POINT('',(130.388578,-155.5,1.51)); +#285570 = VECTOR('',#285571,1.); +#285571 = DIRECTION('',(0.,0.,1.)); +#285572 = ORIENTED_EDGE('',*,*,#285573,.F.); +#285573 = EDGE_CURVE('',#285535,#285566,#285574,.T.); +#285574 = LINE('',#285575,#285576); +#285575 = CARTESIAN_POINT('',(132.8925,-158.001435,1.51)); +#285576 = VECTOR('',#285577,1.); +#285577 = DIRECTION('',(-0.707458032348,0.706755355457,0.)); +#285578 = PLANE('',#285579); +#285579 = AXIS2_PLACEMENT_3D('',#285580,#285581,#285582); +#285580 = CARTESIAN_POINT('',(132.8925,-158.001435,1.51)); +#285581 = DIRECTION('',(-0.706755355457,-0.707458032348,0.)); +#285582 = DIRECTION('',(-0.707458032348,0.706755355457,0.)); +#285583 = ADVANCED_FACE('',(#285584),#285609,.T.); +#285584 = FACE_BOUND('',#285585,.T.); +#285585 = EDGE_LOOP('',(#285586,#285587,#285595,#285603)); +#285586 = ORIENTED_EDGE('',*,*,#285565,.T.); +#285587 = ORIENTED_EDGE('',*,*,#285588,.T.); +#285588 = EDGE_CURVE('',#285558,#285589,#285591,.T.); +#285589 = VERTEX_POINT('',#285590); +#285590 = CARTESIAN_POINT('',(129.1,-155.5,1.545)); +#285591 = LINE('',#285592,#285593); +#285592 = CARTESIAN_POINT('',(130.388578,-155.5,1.545)); +#285593 = VECTOR('',#285594,1.); +#285594 = DIRECTION('',(-1.,0.,0.)); +#285595 = ORIENTED_EDGE('',*,*,#285596,.F.); +#285596 = EDGE_CURVE('',#285597,#285589,#285599,.T.); +#285597 = VERTEX_POINT('',#285598); +#285598 = CARTESIAN_POINT('',(129.1,-155.5,1.51)); +#285599 = LINE('',#285600,#285601); +#285600 = CARTESIAN_POINT('',(129.1,-155.5,1.51)); +#285601 = VECTOR('',#285602,1.); +#285602 = DIRECTION('',(0.,0.,1.)); +#285603 = ORIENTED_EDGE('',*,*,#285604,.F.); +#285604 = EDGE_CURVE('',#285566,#285597,#285605,.T.); +#285605 = LINE('',#285606,#285607); +#285606 = CARTESIAN_POINT('',(130.388578,-155.5,1.51)); +#285607 = VECTOR('',#285608,1.); +#285608 = DIRECTION('',(-1.,0.,0.)); +#285609 = PLANE('',#285610); +#285610 = AXIS2_PLACEMENT_3D('',#285611,#285612,#285613); +#285611 = CARTESIAN_POINT('',(130.388578,-155.5,1.51)); +#285612 = DIRECTION('',(0.,-1.,0.)); +#285613 = DIRECTION('',(-1.,0.,0.)); +#285614 = ADVANCED_FACE('',(#285615),#285640,.T.); +#285615 = FACE_BOUND('',#285616,.T.); +#285616 = EDGE_LOOP('',(#285617,#285618,#285626,#285634)); +#285617 = ORIENTED_EDGE('',*,*,#285596,.T.); +#285618 = ORIENTED_EDGE('',*,*,#285619,.T.); +#285619 = EDGE_CURVE('',#285589,#285620,#285622,.T.); +#285620 = VERTEX_POINT('',#285621); +#285621 = CARTESIAN_POINT('',(129.098079,-157.319509,1.545)); +#285622 = LINE('',#285623,#285624); +#285623 = CARTESIAN_POINT('',(129.1,-155.5,1.545)); +#285624 = VECTOR('',#285625,1.); +#285625 = DIRECTION('',(-1.055778745443E-03,-0.999999442665,0.)); +#285626 = ORIENTED_EDGE('',*,*,#285627,.F.); +#285627 = EDGE_CURVE('',#285628,#285620,#285630,.T.); +#285628 = VERTEX_POINT('',#285629); +#285629 = CARTESIAN_POINT('',(129.098079,-157.319509,1.51)); +#285630 = LINE('',#285631,#285632); +#285631 = CARTESIAN_POINT('',(129.098079,-157.319509,1.51)); +#285632 = VECTOR('',#285633,1.); +#285633 = DIRECTION('',(0.,0.,1.)); +#285634 = ORIENTED_EDGE('',*,*,#285635,.F.); +#285635 = EDGE_CURVE('',#285597,#285628,#285636,.T.); +#285636 = LINE('',#285637,#285638); +#285637 = CARTESIAN_POINT('',(129.1,-155.5,1.51)); +#285638 = VECTOR('',#285639,1.); +#285639 = DIRECTION('',(-1.055778745443E-03,-0.999999442665,0.)); +#285640 = PLANE('',#285641); +#285641 = AXIS2_PLACEMENT_3D('',#285642,#285643,#285644); +#285642 = CARTESIAN_POINT('',(129.1,-155.5,1.51)); +#285643 = DIRECTION('',(0.999999442665,-1.055778745443E-03,0.)); +#285644 = DIRECTION('',(-1.055778745443E-03,-0.999999442665,0.)); +#285645 = ADVANCED_FACE('',(#285646),#285673,.T.); +#285646 = FACE_BOUND('',#285647,.T.); +#285647 = EDGE_LOOP('',(#285648,#285649,#285658,#285666)); +#285648 = ORIENTED_EDGE('',*,*,#285627,.T.); +#285649 = ORIENTED_EDGE('',*,*,#285650,.T.); +#285650 = EDGE_CURVE('',#285620,#285651,#285653,.T.); +#285651 = VERTEX_POINT('',#285652); +#285652 = CARTESIAN_POINT('',(128.901921,-157.319509,1.545)); +#285653 = CIRCLE('',#285654,0.100000456609); +#285654 = AXIS2_PLACEMENT_3D('',#285655,#285656,#285657); +#285655 = CARTESIAN_POINT('',(129.,-157.3,1.545)); +#285656 = DIRECTION('',(-0.,0.,-1.)); +#285657 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#285658 = ORIENTED_EDGE('',*,*,#285659,.F.); +#285659 = EDGE_CURVE('',#285660,#285651,#285662,.T.); +#285660 = VERTEX_POINT('',#285661); +#285661 = CARTESIAN_POINT('',(128.901921,-157.319509,1.51)); +#285662 = LINE('',#285663,#285664); +#285663 = CARTESIAN_POINT('',(128.901921,-157.319509,1.51)); +#285664 = VECTOR('',#285665,1.); +#285665 = DIRECTION('',(0.,0.,1.)); +#285666 = ORIENTED_EDGE('',*,*,#285667,.F.); +#285667 = EDGE_CURVE('',#285628,#285660,#285668,.T.); +#285668 = CIRCLE('',#285669,0.100000456609); +#285669 = AXIS2_PLACEMENT_3D('',#285670,#285671,#285672); +#285670 = CARTESIAN_POINT('',(129.,-157.3,1.51)); +#285671 = DIRECTION('',(-0.,0.,-1.)); +#285672 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#285673 = CYLINDRICAL_SURFACE('',#285674,0.100000456609); +#285674 = AXIS2_PLACEMENT_3D('',#285675,#285676,#285677); +#285675 = CARTESIAN_POINT('',(129.,-157.3,1.51)); +#285676 = DIRECTION('',(-0.,0.,-1.)); +#285677 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#285678 = ADVANCED_FACE('',(#285679),#285695,.T.); +#285679 = FACE_BOUND('',#285680,.T.); +#285680 = EDGE_LOOP('',(#285681,#285682,#285688,#285689)); +#285681 = ORIENTED_EDGE('',*,*,#285659,.T.); +#285682 = ORIENTED_EDGE('',*,*,#285683,.T.); +#285683 = EDGE_CURVE('',#285651,#285331,#285684,.T.); +#285684 = LINE('',#285685,#285686); +#285685 = CARTESIAN_POINT('',(128.901921,-157.319509,1.545)); +#285686 = VECTOR('',#285687,1.); +#285687 = DIRECTION('',(0.,1.,0.)); +#285688 = ORIENTED_EDGE('',*,*,#285328,.F.); +#285689 = ORIENTED_EDGE('',*,*,#285690,.F.); +#285690 = EDGE_CURVE('',#285660,#285329,#285691,.T.); +#285691 = LINE('',#285692,#285693); +#285692 = CARTESIAN_POINT('',(128.901921,-157.319509,1.51)); +#285693 = VECTOR('',#285694,1.); +#285694 = DIRECTION('',(0.,1.,0.)); +#285695 = PLANE('',#285696); +#285696 = AXIS2_PLACEMENT_3D('',#285697,#285698,#285699); +#285697 = CARTESIAN_POINT('',(128.901921,-157.319509,1.51)); +#285698 = DIRECTION('',(-1.,0.,0.)); +#285699 = DIRECTION('',(0.,1.,0.)); +#285700 = ADVANCED_FACE('',(#285701),#285715,.F.); +#285701 = FACE_BOUND('',#285702,.T.); +#285702 = EDGE_LOOP('',(#285703,#285704,#285705,#285706,#285707,#285708, + #285709,#285710,#285711,#285712,#285713,#285714)); +#285703 = ORIENTED_EDGE('',*,*,#285355,.T.); +#285704 = ORIENTED_EDGE('',*,*,#285387,.T.); +#285705 = ORIENTED_EDGE('',*,*,#285418,.T.); +#285706 = ORIENTED_EDGE('',*,*,#285449,.T.); +#285707 = ORIENTED_EDGE('',*,*,#285480,.T.); +#285708 = ORIENTED_EDGE('',*,*,#285511,.T.); +#285709 = ORIENTED_EDGE('',*,*,#285542,.T.); +#285710 = ORIENTED_EDGE('',*,*,#285573,.T.); +#285711 = ORIENTED_EDGE('',*,*,#285604,.T.); +#285712 = ORIENTED_EDGE('',*,*,#285635,.T.); +#285713 = ORIENTED_EDGE('',*,*,#285667,.T.); +#285714 = ORIENTED_EDGE('',*,*,#285690,.T.); +#285715 = PLANE('',#285716); +#285716 = AXIS2_PLACEMENT_3D('',#285717,#285718,#285719); +#285717 = CARTESIAN_POINT('',(0.,0.,1.51)); +#285718 = DIRECTION('',(0.,0.,1.)); +#285719 = DIRECTION('',(1.,0.,-0.)); +#285720 = ADVANCED_FACE('',(#285721),#285735,.T.); +#285721 = FACE_BOUND('',#285722,.F.); +#285722 = EDGE_LOOP('',(#285723,#285724,#285725,#285726,#285727,#285728, + #285729,#285730,#285731,#285732,#285733,#285734)); +#285723 = ORIENTED_EDGE('',*,*,#285338,.T.); +#285724 = ORIENTED_EDGE('',*,*,#285371,.T.); +#285725 = ORIENTED_EDGE('',*,*,#285402,.T.); +#285726 = ORIENTED_EDGE('',*,*,#285433,.T.); +#285727 = ORIENTED_EDGE('',*,*,#285464,.T.); +#285728 = ORIENTED_EDGE('',*,*,#285495,.T.); +#285729 = ORIENTED_EDGE('',*,*,#285526,.T.); +#285730 = ORIENTED_EDGE('',*,*,#285557,.T.); +#285731 = ORIENTED_EDGE('',*,*,#285588,.T.); +#285732 = ORIENTED_EDGE('',*,*,#285619,.T.); +#285733 = ORIENTED_EDGE('',*,*,#285650,.T.); +#285734 = ORIENTED_EDGE('',*,*,#285683,.T.); +#285735 = PLANE('',#285736); +#285736 = AXIS2_PLACEMENT_3D('',#285737,#285738,#285739); +#285737 = CARTESIAN_POINT('',(0.,0.,1.545)); +#285738 = DIRECTION('',(0.,0.,1.)); +#285739 = DIRECTION('',(1.,0.,-0.)); +#285740 = MANIFOLD_SOLID_BREP('',#285741); +#285741 = CLOSED_SHELL('',(#285742,#285784,#285815,#285848,#285870, + #285882)); +#285742 = ADVANCED_FACE('',(#285743),#285779,.F.); +#285743 = FACE_BOUND('',#285744,.T.); +#285744 = EDGE_LOOP('',(#285745,#285755,#285764,#285772)); +#285745 = ORIENTED_EDGE('',*,*,#285746,.T.); +#285746 = EDGE_CURVE('',#285747,#285749,#285751,.T.); +#285747 = VERTEX_POINT('',#285748); +#285748 = CARTESIAN_POINT('',(141.919756,-157.581744,1.51)); +#285749 = VERTEX_POINT('',#285750); +#285750 = CARTESIAN_POINT('',(141.919756,-157.581744,1.545)); +#285751 = LINE('',#285752,#285753); +#285752 = CARTESIAN_POINT('',(141.919756,-157.581744,1.51)); +#285753 = VECTOR('',#285754,1.); +#285754 = DIRECTION('',(0.,0.,1.)); +#285755 = ORIENTED_EDGE('',*,*,#285756,.T.); +#285756 = EDGE_CURVE('',#285749,#285757,#285759,.T.); +#285757 = VERTEX_POINT('',#285758); +#285758 = CARTESIAN_POINT('',(141.72,-157.581809,1.545)); +#285759 = CIRCLE('',#285760,0.267306109673); +#285760 = AXIS2_PLACEMENT_3D('',#285761,#285762,#285763); +#285761 = CARTESIAN_POINT('',(141.81995868069,-157.829721925,1.545)); +#285762 = DIRECTION('',(0.,0.,1.)); +#285763 = DIRECTION('',(0.373344699934,0.927692694286,-0.)); +#285764 = ORIENTED_EDGE('',*,*,#285765,.F.); +#285765 = EDGE_CURVE('',#285766,#285757,#285768,.T.); +#285766 = VERTEX_POINT('',#285767); +#285767 = CARTESIAN_POINT('',(141.72,-157.581809,1.51)); +#285768 = LINE('',#285769,#285770); +#285769 = CARTESIAN_POINT('',(141.72,-157.581809,1.51)); +#285770 = VECTOR('',#285771,1.); +#285771 = DIRECTION('',(0.,0.,1.)); +#285772 = ORIENTED_EDGE('',*,*,#285773,.F.); +#285773 = EDGE_CURVE('',#285747,#285766,#285774,.T.); +#285774 = CIRCLE('',#285775,0.267306109673); +#285775 = AXIS2_PLACEMENT_3D('',#285776,#285777,#285778); +#285776 = CARTESIAN_POINT('',(141.81995868069,-157.829721925,1.51)); +#285777 = DIRECTION('',(0.,0.,1.)); +#285778 = DIRECTION('',(0.373344699934,0.927692694286,-0.)); +#285779 = CYLINDRICAL_SURFACE('',#285780,0.267306109673); +#285780 = AXIS2_PLACEMENT_3D('',#285781,#285782,#285783); +#285781 = CARTESIAN_POINT('',(141.81995868069,-157.829721925,1.51)); +#285782 = DIRECTION('',(-0.,-0.,-1.)); +#285783 = DIRECTION('',(0.373344699934,0.927692694286,-0.)); +#285784 = ADVANCED_FACE('',(#285785),#285810,.T.); +#285785 = FACE_BOUND('',#285786,.T.); +#285786 = EDGE_LOOP('',(#285787,#285788,#285796,#285804)); +#285787 = ORIENTED_EDGE('',*,*,#285765,.T.); +#285788 = ORIENTED_EDGE('',*,*,#285789,.T.); +#285789 = EDGE_CURVE('',#285757,#285790,#285792,.T.); +#285790 = VERTEX_POINT('',#285791); +#285791 = CARTESIAN_POINT('',(141.72,-154.788189,1.545)); +#285792 = LINE('',#285793,#285794); +#285793 = CARTESIAN_POINT('',(141.72,-157.581809,1.545)); +#285794 = VECTOR('',#285795,1.); +#285795 = DIRECTION('',(0.,1.,0.)); +#285796 = ORIENTED_EDGE('',*,*,#285797,.F.); +#285797 = EDGE_CURVE('',#285798,#285790,#285800,.T.); +#285798 = VERTEX_POINT('',#285799); +#285799 = CARTESIAN_POINT('',(141.72,-154.788189,1.51)); +#285800 = LINE('',#285801,#285802); +#285801 = CARTESIAN_POINT('',(141.72,-154.788189,1.51)); +#285802 = VECTOR('',#285803,1.); +#285803 = DIRECTION('',(0.,0.,1.)); +#285804 = ORIENTED_EDGE('',*,*,#285805,.F.); +#285805 = EDGE_CURVE('',#285766,#285798,#285806,.T.); +#285806 = LINE('',#285807,#285808); +#285807 = CARTESIAN_POINT('',(141.72,-157.581809,1.51)); +#285808 = VECTOR('',#285809,1.); +#285809 = DIRECTION('',(0.,1.,0.)); +#285810 = PLANE('',#285811); +#285811 = AXIS2_PLACEMENT_3D('',#285812,#285813,#285814); +#285812 = CARTESIAN_POINT('',(141.72,-157.581809,1.51)); +#285813 = DIRECTION('',(-1.,0.,0.)); +#285814 = DIRECTION('',(0.,1.,0.)); +#285815 = ADVANCED_FACE('',(#285816),#285843,.F.); +#285816 = FACE_BOUND('',#285817,.T.); +#285817 = EDGE_LOOP('',(#285818,#285819,#285828,#285836)); +#285818 = ORIENTED_EDGE('',*,*,#285797,.T.); +#285819 = ORIENTED_EDGE('',*,*,#285820,.T.); +#285820 = EDGE_CURVE('',#285790,#285821,#285823,.T.); +#285821 = VERTEX_POINT('',#285822); +#285822 = CARTESIAN_POINT('',(141.918466,-154.7886,1.545)); +#285823 = CIRCLE('',#285824,0.266630915049); +#285824 = AXIS2_PLACEMENT_3D('',#285825,#285826,#285827); +#285825 = CARTESIAN_POINT('',(141.81974549476,-154.540918134,1.545)); +#285826 = DIRECTION('',(0.,0.,1.)); +#285827 = DIRECTION('',(-0.374095759858,-0.927390081064,0.)); +#285828 = ORIENTED_EDGE('',*,*,#285829,.F.); +#285829 = EDGE_CURVE('',#285830,#285821,#285832,.T.); +#285830 = VERTEX_POINT('',#285831); +#285831 = CARTESIAN_POINT('',(141.918466,-154.7886,1.51)); +#285832 = LINE('',#285833,#285834); +#285833 = CARTESIAN_POINT('',(141.918466,-154.7886,1.51)); +#285834 = VECTOR('',#285835,1.); +#285835 = DIRECTION('',(0.,0.,1.)); +#285836 = ORIENTED_EDGE('',*,*,#285837,.F.); +#285837 = EDGE_CURVE('',#285798,#285830,#285838,.T.); +#285838 = CIRCLE('',#285839,0.266630915049); +#285839 = AXIS2_PLACEMENT_3D('',#285840,#285841,#285842); +#285840 = CARTESIAN_POINT('',(141.81974549476,-154.540918134,1.51)); +#285841 = DIRECTION('',(0.,0.,1.)); +#285842 = DIRECTION('',(-0.374095759858,-0.927390081064,0.)); +#285843 = CYLINDRICAL_SURFACE('',#285844,0.266630915049); +#285844 = AXIS2_PLACEMENT_3D('',#285845,#285846,#285847); +#285845 = CARTESIAN_POINT('',(141.81974549476,-154.540918134,1.51)); +#285846 = DIRECTION('',(-0.,-0.,-1.)); +#285847 = DIRECTION('',(-0.374095759858,-0.927390081064,0.)); +#285848 = ADVANCED_FACE('',(#285849),#285865,.T.); +#285849 = FACE_BOUND('',#285850,.T.); +#285850 = EDGE_LOOP('',(#285851,#285852,#285858,#285859)); +#285851 = ORIENTED_EDGE('',*,*,#285829,.T.); +#285852 = ORIENTED_EDGE('',*,*,#285853,.T.); +#285853 = EDGE_CURVE('',#285821,#285749,#285854,.T.); +#285854 = LINE('',#285855,#285856); +#285855 = CARTESIAN_POINT('',(141.918466,-154.7886,1.545)); +#285856 = VECTOR('',#285857,1.); +#285857 = DIRECTION('',(4.618450972927E-04,-0.99999989335,0.)); +#285858 = ORIENTED_EDGE('',*,*,#285746,.F.); +#285859 = ORIENTED_EDGE('',*,*,#285860,.F.); +#285860 = EDGE_CURVE('',#285830,#285747,#285861,.T.); +#285861 = LINE('',#285862,#285863); +#285862 = CARTESIAN_POINT('',(141.918466,-154.7886,1.51)); +#285863 = VECTOR('',#285864,1.); +#285864 = DIRECTION('',(4.618450972927E-04,-0.99999989335,0.)); +#285865 = PLANE('',#285866); +#285866 = AXIS2_PLACEMENT_3D('',#285867,#285868,#285869); +#285867 = CARTESIAN_POINT('',(141.918466,-154.7886,1.51)); +#285868 = DIRECTION('',(0.99999989335,4.618450972927E-04,-0.)); +#285869 = DIRECTION('',(4.618450972927E-04,-0.99999989335,0.)); +#285870 = ADVANCED_FACE('',(#285871),#285877,.F.); +#285871 = FACE_BOUND('',#285872,.T.); +#285872 = EDGE_LOOP('',(#285873,#285874,#285875,#285876)); +#285873 = ORIENTED_EDGE('',*,*,#285773,.T.); +#285874 = ORIENTED_EDGE('',*,*,#285805,.T.); +#285875 = ORIENTED_EDGE('',*,*,#285837,.T.); +#285876 = ORIENTED_EDGE('',*,*,#285860,.T.); +#285877 = PLANE('',#285878); +#285878 = AXIS2_PLACEMENT_3D('',#285879,#285880,#285881); +#285879 = CARTESIAN_POINT('',(0.,0.,1.51)); +#285880 = DIRECTION('',(0.,0.,1.)); +#285881 = DIRECTION('',(1.,0.,-0.)); +#285882 = ADVANCED_FACE('',(#285883),#285889,.T.); +#285883 = FACE_BOUND('',#285884,.F.); +#285884 = EDGE_LOOP('',(#285885,#285886,#285887,#285888)); +#285885 = ORIENTED_EDGE('',*,*,#285756,.T.); +#285886 = ORIENTED_EDGE('',*,*,#285789,.T.); +#285887 = ORIENTED_EDGE('',*,*,#285820,.T.); +#285888 = ORIENTED_EDGE('',*,*,#285853,.T.); +#285889 = PLANE('',#285890); +#285890 = AXIS2_PLACEMENT_3D('',#285891,#285892,#285893); +#285891 = CARTESIAN_POINT('',(0.,0.,1.545)); +#285892 = DIRECTION('',(0.,0.,1.)); +#285893 = DIRECTION('',(1.,0.,-0.)); +#285894 = MANIFOLD_SOLID_BREP('',#285895); +#285895 = CLOSED_SHELL('',(#285896,#285929,#285962,#285974)); +#285896 = ADVANCED_FACE('',(#285897),#285924,.T.); +#285897 = FACE_BOUND('',#285898,.F.); +#285898 = EDGE_LOOP('',(#285899,#285909,#285916,#285917)); +#285899 = ORIENTED_EDGE('',*,*,#285900,.T.); +#285900 = EDGE_CURVE('',#285901,#285903,#285905,.T.); +#285901 = VERTEX_POINT('',#285902); +#285902 = CARTESIAN_POINT('',(136.2,-157.2,1.51)); +#285903 = VERTEX_POINT('',#285904); +#285904 = CARTESIAN_POINT('',(136.2,-157.2,1.545)); +#285905 = LINE('',#285906,#285907); +#285906 = CARTESIAN_POINT('',(136.2,-157.2,1.51)); +#285907 = VECTOR('',#285908,1.); +#285908 = DIRECTION('',(0.,0.,1.)); +#285909 = ORIENTED_EDGE('',*,*,#285910,.T.); +#285910 = EDGE_CURVE('',#285903,#285903,#285911,.T.); +#285911 = CIRCLE('',#285912,0.3); +#285912 = AXIS2_PLACEMENT_3D('',#285913,#285914,#285915); +#285913 = CARTESIAN_POINT('',(135.9,-157.2,1.545)); +#285914 = DIRECTION('',(0.,0.,1.)); +#285915 = DIRECTION('',(1.,0.,-0.)); +#285916 = ORIENTED_EDGE('',*,*,#285900,.F.); +#285917 = ORIENTED_EDGE('',*,*,#285918,.F.); +#285918 = EDGE_CURVE('',#285901,#285901,#285919,.T.); +#285919 = CIRCLE('',#285920,0.3); +#285920 = AXIS2_PLACEMENT_3D('',#285921,#285922,#285923); +#285921 = CARTESIAN_POINT('',(135.9,-157.2,1.51)); +#285922 = DIRECTION('',(0.,0.,1.)); +#285923 = DIRECTION('',(1.,0.,-0.)); +#285924 = CYLINDRICAL_SURFACE('',#285925,0.3); +#285925 = AXIS2_PLACEMENT_3D('',#285926,#285927,#285928); +#285926 = CARTESIAN_POINT('',(135.9,-157.2,1.51)); +#285927 = DIRECTION('',(-0.,-0.,-1.)); +#285928 = DIRECTION('',(1.,0.,-0.)); +#285929 = ADVANCED_FACE('',(#285930),#285957,.F.); +#285930 = FACE_BOUND('',#285931,.T.); +#285931 = EDGE_LOOP('',(#285932,#285942,#285949,#285950)); +#285932 = ORIENTED_EDGE('',*,*,#285933,.T.); +#285933 = EDGE_CURVE('',#285934,#285936,#285938,.T.); +#285934 = VERTEX_POINT('',#285935); +#285935 = CARTESIAN_POINT('',(136.037255,-157.2,1.51)); +#285936 = VERTEX_POINT('',#285937); +#285937 = CARTESIAN_POINT('',(136.037255,-157.2,1.545)); +#285938 = LINE('',#285939,#285940); +#285939 = CARTESIAN_POINT('',(136.037255,-157.2,1.51)); +#285940 = VECTOR('',#285941,1.); +#285941 = DIRECTION('',(0.,0.,1.)); +#285942 = ORIENTED_EDGE('',*,*,#285943,.T.); +#285943 = EDGE_CURVE('',#285936,#285936,#285944,.T.); +#285944 = CIRCLE('',#285945,0.137255); +#285945 = AXIS2_PLACEMENT_3D('',#285946,#285947,#285948); +#285946 = CARTESIAN_POINT('',(135.9,-157.2,1.545)); +#285947 = DIRECTION('',(0.,0.,1.)); +#285948 = DIRECTION('',(1.,0.,-0.)); +#285949 = ORIENTED_EDGE('',*,*,#285933,.F.); +#285950 = ORIENTED_EDGE('',*,*,#285951,.F.); +#285951 = EDGE_CURVE('',#285934,#285934,#285952,.T.); +#285952 = CIRCLE('',#285953,0.137255); +#285953 = AXIS2_PLACEMENT_3D('',#285954,#285955,#285956); +#285954 = CARTESIAN_POINT('',(135.9,-157.2,1.51)); +#285955 = DIRECTION('',(0.,0.,1.)); +#285956 = DIRECTION('',(1.,0.,-0.)); +#285957 = CYLINDRICAL_SURFACE('',#285958,0.137255); +#285958 = AXIS2_PLACEMENT_3D('',#285959,#285960,#285961); +#285959 = CARTESIAN_POINT('',(135.9,-157.2,1.51)); +#285960 = DIRECTION('',(-0.,-0.,-1.)); +#285961 = DIRECTION('',(1.,0.,-0.)); +#285962 = ADVANCED_FACE('',(#285963,#285966),#285969,.F.); +#285963 = FACE_BOUND('',#285964,.F.); +#285964 = EDGE_LOOP('',(#285965)); +#285965 = ORIENTED_EDGE('',*,*,#285918,.T.); +#285966 = FACE_BOUND('',#285967,.T.); +#285967 = EDGE_LOOP('',(#285968)); +#285968 = ORIENTED_EDGE('',*,*,#285951,.T.); +#285969 = PLANE('',#285970); +#285970 = AXIS2_PLACEMENT_3D('',#285971,#285972,#285973); +#285971 = CARTESIAN_POINT('',(0.,0.,1.51)); +#285972 = DIRECTION('',(0.,0.,1.)); +#285973 = DIRECTION('',(1.,0.,-0.)); +#285974 = ADVANCED_FACE('',(#285975,#285978),#285981,.T.); +#285975 = FACE_BOUND('',#285976,.T.); +#285976 = EDGE_LOOP('',(#285977)); +#285977 = ORIENTED_EDGE('',*,*,#285910,.T.); +#285978 = FACE_BOUND('',#285979,.F.); +#285979 = EDGE_LOOP('',(#285980)); +#285980 = ORIENTED_EDGE('',*,*,#285943,.T.); +#285981 = PLANE('',#285982); +#285982 = AXIS2_PLACEMENT_3D('',#285983,#285984,#285985); +#285983 = CARTESIAN_POINT('',(0.,0.,1.545)); +#285984 = DIRECTION('',(0.,0.,1.)); +#285985 = DIRECTION('',(1.,0.,-0.)); +#285986 = MANIFOLD_SOLID_BREP('',#285987); +#285987 = CLOSED_SHELL('',(#285988,#286030,#286061,#286092,#286123, + #286145,#286158)); +#285988 = ADVANCED_FACE('',(#285989),#286025,.T.); +#285989 = FACE_BOUND('',#285990,.T.); +#285990 = EDGE_LOOP('',(#285991,#286001,#286010,#286018)); +#285991 = ORIENTED_EDGE('',*,*,#285992,.T.); +#285992 = EDGE_CURVE('',#285993,#285995,#285997,.T.); +#285993 = VERTEX_POINT('',#285994); +#285994 = CARTESIAN_POINT('',(130.230491,-154.368079,1.51)); +#285995 = VERTEX_POINT('',#285996); +#285996 = CARTESIAN_POINT('',(130.230491,-154.368079,1.545)); +#285997 = LINE('',#285998,#285999); +#285998 = CARTESIAN_POINT('',(130.230491,-154.368079,1.51)); +#285999 = VECTOR('',#286000,1.); +#286000 = DIRECTION('',(0.,0.,1.)); +#286001 = ORIENTED_EDGE('',*,*,#286002,.T.); +#286002 = EDGE_CURVE('',#285995,#286003,#286005,.T.); +#286003 = VERTEX_POINT('',#286004); +#286004 = CARTESIAN_POINT('',(130.230491,-154.171921,1.545)); +#286005 = CIRCLE('',#286006,0.100000456609); +#286006 = AXIS2_PLACEMENT_3D('',#286007,#286008,#286009); +#286007 = CARTESIAN_POINT('',(130.25,-154.27,1.545)); +#286008 = DIRECTION('',(0.,0.,-1.)); +#286009 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286010 = ORIENTED_EDGE('',*,*,#286011,.F.); +#286011 = EDGE_CURVE('',#286012,#286003,#286014,.T.); +#286012 = VERTEX_POINT('',#286013); +#286013 = CARTESIAN_POINT('',(130.230491,-154.171921,1.51)); +#286014 = LINE('',#286015,#286016); +#286015 = CARTESIAN_POINT('',(130.230491,-154.171921,1.51)); +#286016 = VECTOR('',#286017,1.); +#286017 = DIRECTION('',(0.,0.,1.)); +#286018 = ORIENTED_EDGE('',*,*,#286019,.F.); +#286019 = EDGE_CURVE('',#285993,#286012,#286020,.T.); +#286020 = CIRCLE('',#286021,0.100000456609); +#286021 = AXIS2_PLACEMENT_3D('',#286022,#286023,#286024); +#286022 = CARTESIAN_POINT('',(130.25,-154.27,1.51)); +#286023 = DIRECTION('',(0.,0.,-1.)); +#286024 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286025 = CYLINDRICAL_SURFACE('',#286026,0.100000456609); +#286026 = AXIS2_PLACEMENT_3D('',#286027,#286028,#286029); +#286027 = CARTESIAN_POINT('',(130.25,-154.27,1.51)); +#286028 = DIRECTION('',(0.,0.,-1.)); +#286029 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286030 = ADVANCED_FACE('',(#286031),#286056,.T.); +#286031 = FACE_BOUND('',#286032,.T.); +#286032 = EDGE_LOOP('',(#286033,#286034,#286042,#286050)); +#286033 = ORIENTED_EDGE('',*,*,#286011,.T.); +#286034 = ORIENTED_EDGE('',*,*,#286035,.T.); +#286035 = EDGE_CURVE('',#286003,#286036,#286038,.T.); +#286036 = VERTEX_POINT('',#286037); +#286037 = CARTESIAN_POINT('',(132.838578,-154.17,1.545)); +#286038 = LINE('',#286039,#286040); +#286039 = CARTESIAN_POINT('',(130.230491,-154.171921,1.545)); +#286040 = VECTOR('',#286041,1.); +#286041 = DIRECTION('',(0.999999728743,7.36554984142E-04,0.)); +#286042 = ORIENTED_EDGE('',*,*,#286043,.F.); +#286043 = EDGE_CURVE('',#286044,#286036,#286046,.T.); +#286044 = VERTEX_POINT('',#286045); +#286045 = CARTESIAN_POINT('',(132.838578,-154.17,1.51)); +#286046 = LINE('',#286047,#286048); +#286047 = CARTESIAN_POINT('',(132.838578,-154.17,1.51)); +#286048 = VECTOR('',#286049,1.); +#286049 = DIRECTION('',(0.,0.,1.)); +#286050 = ORIENTED_EDGE('',*,*,#286051,.F.); +#286051 = EDGE_CURVE('',#286012,#286044,#286052,.T.); +#286052 = LINE('',#286053,#286054); +#286053 = CARTESIAN_POINT('',(130.230491,-154.171921,1.51)); +#286054 = VECTOR('',#286055,1.); +#286055 = DIRECTION('',(0.999999728743,7.36554984142E-04,0.)); +#286056 = PLANE('',#286057); +#286057 = AXIS2_PLACEMENT_3D('',#286058,#286059,#286060); +#286058 = CARTESIAN_POINT('',(130.230491,-154.171921,1.51)); +#286059 = DIRECTION('',(-7.36554984142E-04,0.999999728743,0.)); +#286060 = DIRECTION('',(0.999999728743,7.36554984142E-04,0.)); +#286061 = ADVANCED_FACE('',(#286062),#286087,.T.); +#286062 = FACE_BOUND('',#286063,.T.); +#286063 = EDGE_LOOP('',(#286064,#286065,#286073,#286081)); +#286064 = ORIENTED_EDGE('',*,*,#286043,.T.); +#286065 = ORIENTED_EDGE('',*,*,#286066,.T.); +#286066 = EDGE_CURVE('',#286036,#286067,#286069,.T.); +#286067 = VERTEX_POINT('',#286068); +#286068 = CARTESIAN_POINT('',(132.8925,-154.1162,1.545)); +#286069 = LINE('',#286070,#286071); +#286070 = CARTESIAN_POINT('',(132.838578,-154.17,1.545)); +#286071 = VECTOR('',#286072,1.); +#286072 = DIRECTION('',(0.707907157353,0.706305498045,0.)); +#286073 = ORIENTED_EDGE('',*,*,#286074,.F.); +#286074 = EDGE_CURVE('',#286075,#286067,#286077,.T.); +#286075 = VERTEX_POINT('',#286076); +#286076 = CARTESIAN_POINT('',(132.8925,-154.1162,1.51)); +#286077 = LINE('',#286078,#286079); +#286078 = CARTESIAN_POINT('',(132.8925,-154.1162,1.51)); +#286079 = VECTOR('',#286080,1.); +#286080 = DIRECTION('',(0.,0.,1.)); +#286081 = ORIENTED_EDGE('',*,*,#286082,.F.); +#286082 = EDGE_CURVE('',#286044,#286075,#286083,.T.); +#286083 = LINE('',#286084,#286085); +#286084 = CARTESIAN_POINT('',(132.838578,-154.17,1.51)); +#286085 = VECTOR('',#286086,1.); +#286086 = DIRECTION('',(0.707907157353,0.706305498045,0.)); +#286087 = PLANE('',#286088); +#286088 = AXIS2_PLACEMENT_3D('',#286089,#286090,#286091); +#286089 = CARTESIAN_POINT('',(132.838578,-154.17,1.51)); +#286090 = DIRECTION('',(-0.706305498045,0.707907157353,0.)); +#286091 = DIRECTION('',(0.707907157353,0.706305498045,0.)); +#286092 = ADVANCED_FACE('',(#286093),#286118,.T.); +#286093 = FACE_BOUND('',#286094,.T.); +#286094 = EDGE_LOOP('',(#286095,#286096,#286104,#286112)); +#286095 = ORIENTED_EDGE('',*,*,#286074,.T.); +#286096 = ORIENTED_EDGE('',*,*,#286097,.T.); +#286097 = EDGE_CURVE('',#286067,#286098,#286100,.T.); +#286098 = VERTEX_POINT('',#286099); +#286099 = CARTESIAN_POINT('',(132.8925,-154.368079,1.545)); +#286100 = LINE('',#286101,#286102); +#286101 = CARTESIAN_POINT('',(132.8925,-154.1162,1.545)); +#286102 = VECTOR('',#286103,1.); +#286103 = DIRECTION('',(0.,-1.,0.)); +#286104 = ORIENTED_EDGE('',*,*,#286105,.F.); +#286105 = EDGE_CURVE('',#286106,#286098,#286108,.T.); +#286106 = VERTEX_POINT('',#286107); +#286107 = CARTESIAN_POINT('',(132.8925,-154.368079,1.51)); +#286108 = LINE('',#286109,#286110); +#286109 = CARTESIAN_POINT('',(132.8925,-154.368079,1.51)); +#286110 = VECTOR('',#286111,1.); +#286111 = DIRECTION('',(0.,0.,1.)); +#286112 = ORIENTED_EDGE('',*,*,#286113,.F.); +#286113 = EDGE_CURVE('',#286075,#286106,#286114,.T.); +#286114 = LINE('',#286115,#286116); +#286115 = CARTESIAN_POINT('',(132.8925,-154.1162,1.51)); +#286116 = VECTOR('',#286117,1.); +#286117 = DIRECTION('',(0.,-1.,0.)); +#286118 = PLANE('',#286119); +#286119 = AXIS2_PLACEMENT_3D('',#286120,#286121,#286122); +#286120 = CARTESIAN_POINT('',(132.8925,-154.1162,1.51)); +#286121 = DIRECTION('',(1.,0.,-0.)); +#286122 = DIRECTION('',(0.,-1.,0.)); +#286123 = ADVANCED_FACE('',(#286124),#286140,.T.); +#286124 = FACE_BOUND('',#286125,.T.); +#286125 = EDGE_LOOP('',(#286126,#286127,#286133,#286134)); +#286126 = ORIENTED_EDGE('',*,*,#286105,.T.); +#286127 = ORIENTED_EDGE('',*,*,#286128,.T.); +#286128 = EDGE_CURVE('',#286098,#285995,#286129,.T.); +#286129 = LINE('',#286130,#286131); +#286130 = CARTESIAN_POINT('',(132.8925,-154.368079,1.545)); +#286131 = VECTOR('',#286132,1.); +#286132 = DIRECTION('',(-1.,0.,0.)); +#286133 = ORIENTED_EDGE('',*,*,#285992,.F.); +#286134 = ORIENTED_EDGE('',*,*,#286135,.F.); +#286135 = EDGE_CURVE('',#286106,#285993,#286136,.T.); +#286136 = LINE('',#286137,#286138); +#286137 = CARTESIAN_POINT('',(132.8925,-154.368079,1.51)); +#286138 = VECTOR('',#286139,1.); +#286139 = DIRECTION('',(-1.,0.,0.)); +#286140 = PLANE('',#286141); +#286141 = AXIS2_PLACEMENT_3D('',#286142,#286143,#286144); +#286142 = CARTESIAN_POINT('',(132.8925,-154.368079,1.51)); +#286143 = DIRECTION('',(0.,-1.,0.)); +#286144 = DIRECTION('',(-1.,0.,0.)); +#286145 = ADVANCED_FACE('',(#286146),#286153,.F.); +#286146 = FACE_BOUND('',#286147,.T.); +#286147 = EDGE_LOOP('',(#286148,#286149,#286150,#286151,#286152)); +#286148 = ORIENTED_EDGE('',*,*,#286019,.T.); +#286149 = ORIENTED_EDGE('',*,*,#286051,.T.); +#286150 = ORIENTED_EDGE('',*,*,#286082,.T.); +#286151 = ORIENTED_EDGE('',*,*,#286113,.T.); +#286152 = ORIENTED_EDGE('',*,*,#286135,.T.); +#286153 = PLANE('',#286154); +#286154 = AXIS2_PLACEMENT_3D('',#286155,#286156,#286157); +#286155 = CARTESIAN_POINT('',(0.,0.,1.51)); +#286156 = DIRECTION('',(0.,0.,1.)); +#286157 = DIRECTION('',(1.,0.,-0.)); +#286158 = ADVANCED_FACE('',(#286159),#286166,.T.); +#286159 = FACE_BOUND('',#286160,.F.); +#286160 = EDGE_LOOP('',(#286161,#286162,#286163,#286164,#286165)); +#286161 = ORIENTED_EDGE('',*,*,#286002,.T.); +#286162 = ORIENTED_EDGE('',*,*,#286035,.T.); +#286163 = ORIENTED_EDGE('',*,*,#286066,.T.); +#286164 = ORIENTED_EDGE('',*,*,#286097,.T.); +#286165 = ORIENTED_EDGE('',*,*,#286128,.T.); +#286166 = PLANE('',#286167); +#286167 = AXIS2_PLACEMENT_3D('',#286168,#286169,#286170); +#286168 = CARTESIAN_POINT('',(0.,0.,1.545)); +#286169 = DIRECTION('',(0.,0.,1.)); +#286170 = DIRECTION('',(1.,0.,-0.)); +#286171 = MANIFOLD_SOLID_BREP('',#286172); +#286172 = CLOSED_SHELL('',(#286173,#286213,#286244,#286277,#286299, + #286311)); +#286173 = ADVANCED_FACE('',(#286174),#286208,.T.); +#286174 = FACE_BOUND('',#286175,.T.); +#286175 = EDGE_LOOP('',(#286176,#286186,#286194,#286202)); +#286176 = ORIENTED_EDGE('',*,*,#286177,.T.); +#286177 = EDGE_CURVE('',#286178,#286180,#286182,.T.); +#286178 = VERTEX_POINT('',#286179); +#286179 = CARTESIAN_POINT('',(141.5325,-153.696603,1.51)); +#286180 = VERTEX_POINT('',#286181); +#286181 = CARTESIAN_POINT('',(141.5325,-153.696603,1.545)); +#286182 = LINE('',#286183,#286184); +#286183 = CARTESIAN_POINT('',(141.5325,-153.696603,1.51)); +#286184 = VECTOR('',#286185,1.); +#286185 = DIRECTION('',(0.,0.,1.)); +#286186 = ORIENTED_EDGE('',*,*,#286187,.T.); +#286187 = EDGE_CURVE('',#286180,#286188,#286190,.T.); +#286188 = VERTEX_POINT('',#286189); +#286189 = CARTESIAN_POINT('',(141.5325,-153.976204,1.545)); +#286190 = LINE('',#286191,#286192); +#286191 = CARTESIAN_POINT('',(141.5325,-153.696603,1.545)); +#286192 = VECTOR('',#286193,1.); +#286193 = DIRECTION('',(0.,-1.,0.)); +#286194 = ORIENTED_EDGE('',*,*,#286195,.F.); +#286195 = EDGE_CURVE('',#286196,#286188,#286198,.T.); +#286196 = VERTEX_POINT('',#286197); +#286197 = CARTESIAN_POINT('',(141.5325,-153.976204,1.51)); +#286198 = LINE('',#286199,#286200); +#286199 = CARTESIAN_POINT('',(141.5325,-153.976204,1.51)); +#286200 = VECTOR('',#286201,1.); +#286201 = DIRECTION('',(0.,0.,1.)); +#286202 = ORIENTED_EDGE('',*,*,#286203,.F.); +#286203 = EDGE_CURVE('',#286178,#286196,#286204,.T.); +#286204 = LINE('',#286205,#286206); +#286205 = CARTESIAN_POINT('',(141.5325,-153.696603,1.51)); +#286206 = VECTOR('',#286207,1.); +#286207 = DIRECTION('',(0.,-1.,0.)); +#286208 = PLANE('',#286209); +#286209 = AXIS2_PLACEMENT_3D('',#286210,#286211,#286212); +#286210 = CARTESIAN_POINT('',(141.5325,-153.696603,1.51)); +#286211 = DIRECTION('',(1.,0.,-0.)); +#286212 = DIRECTION('',(0.,-1.,0.)); +#286213 = ADVANCED_FACE('',(#286214),#286239,.T.); +#286214 = FACE_BOUND('',#286215,.T.); +#286215 = EDGE_LOOP('',(#286216,#286217,#286225,#286233)); +#286216 = ORIENTED_EDGE('',*,*,#286195,.T.); +#286217 = ORIENTED_EDGE('',*,*,#286218,.T.); +#286218 = EDGE_CURVE('',#286188,#286219,#286221,.T.); +#286219 = VERTEX_POINT('',#286220); +#286220 = CARTESIAN_POINT('',(140.666853,-153.110557,1.545)); +#286221 = LINE('',#286222,#286223); +#286222 = CARTESIAN_POINT('',(141.5325,-153.976204,1.545)); +#286223 = VECTOR('',#286224,1.); +#286224 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286225 = ORIENTED_EDGE('',*,*,#286226,.F.); +#286226 = EDGE_CURVE('',#286227,#286219,#286229,.T.); +#286227 = VERTEX_POINT('',#286228); +#286228 = CARTESIAN_POINT('',(140.666853,-153.110557,1.51)); +#286229 = LINE('',#286230,#286231); +#286230 = CARTESIAN_POINT('',(140.666853,-153.110557,1.51)); +#286231 = VECTOR('',#286232,1.); +#286232 = DIRECTION('',(0.,0.,1.)); +#286233 = ORIENTED_EDGE('',*,*,#286234,.F.); +#286234 = EDGE_CURVE('',#286196,#286227,#286235,.T.); +#286235 = LINE('',#286236,#286237); +#286236 = CARTESIAN_POINT('',(141.5325,-153.976204,1.51)); +#286237 = VECTOR('',#286238,1.); +#286238 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286239 = PLANE('',#286240); +#286240 = AXIS2_PLACEMENT_3D('',#286241,#286242,#286243); +#286241 = CARTESIAN_POINT('',(141.5325,-153.976204,1.51)); +#286242 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#286243 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286244 = ADVANCED_FACE('',(#286245),#286272,.T.); +#286245 = FACE_BOUND('',#286246,.T.); +#286246 = EDGE_LOOP('',(#286247,#286248,#286257,#286265)); +#286247 = ORIENTED_EDGE('',*,*,#286226,.T.); +#286248 = ORIENTED_EDGE('',*,*,#286249,.T.); +#286249 = EDGE_CURVE('',#286219,#286250,#286252,.T.); +#286250 = VERTEX_POINT('',#286251); +#286251 = CARTESIAN_POINT('',(140.805557,-152.971853,1.545)); +#286252 = CIRCLE('',#286253,9.999988522643E-02); +#286253 = AXIS2_PLACEMENT_3D('',#286254,#286255,#286256); +#286254 = CARTESIAN_POINT('',(140.74999951407,-153.054999514,1.545)); +#286255 = DIRECTION('',(0.,0.,-1.)); +#286256 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#286257 = ORIENTED_EDGE('',*,*,#286258,.F.); +#286258 = EDGE_CURVE('',#286259,#286250,#286261,.T.); +#286259 = VERTEX_POINT('',#286260); +#286260 = CARTESIAN_POINT('',(140.805557,-152.971853,1.51)); +#286261 = LINE('',#286262,#286263); +#286262 = CARTESIAN_POINT('',(140.805557,-152.971853,1.51)); +#286263 = VECTOR('',#286264,1.); +#286264 = DIRECTION('',(0.,0.,1.)); +#286265 = ORIENTED_EDGE('',*,*,#286266,.F.); +#286266 = EDGE_CURVE('',#286227,#286259,#286267,.T.); +#286267 = CIRCLE('',#286268,9.999988522643E-02); +#286268 = AXIS2_PLACEMENT_3D('',#286269,#286270,#286271); +#286269 = CARTESIAN_POINT('',(140.74999951407,-153.054999514,1.51)); +#286270 = DIRECTION('',(0.,0.,-1.)); +#286271 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#286272 = CYLINDRICAL_SURFACE('',#286273,9.999988522643E-02); +#286273 = AXIS2_PLACEMENT_3D('',#286274,#286275,#286276); +#286274 = CARTESIAN_POINT('',(140.74999951407,-153.054999514,1.51)); +#286275 = DIRECTION('',(0.,0.,-1.)); +#286276 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#286277 = ADVANCED_FACE('',(#286278),#286294,.T.); +#286278 = FACE_BOUND('',#286279,.T.); +#286279 = EDGE_LOOP('',(#286280,#286281,#286287,#286288)); +#286280 = ORIENTED_EDGE('',*,*,#286258,.T.); +#286281 = ORIENTED_EDGE('',*,*,#286282,.T.); +#286282 = EDGE_CURVE('',#286250,#286180,#286283,.T.); +#286283 = LINE('',#286284,#286285); +#286284 = CARTESIAN_POINT('',(140.805557,-152.971853,1.545)); +#286285 = VECTOR('',#286286,1.); +#286286 = DIRECTION('',(0.708174163982,-0.706037784731,0.)); +#286287 = ORIENTED_EDGE('',*,*,#286177,.F.); +#286288 = ORIENTED_EDGE('',*,*,#286289,.F.); +#286289 = EDGE_CURVE('',#286259,#286178,#286290,.T.); +#286290 = LINE('',#286291,#286292); +#286291 = CARTESIAN_POINT('',(140.805557,-152.971853,1.51)); +#286292 = VECTOR('',#286293,1.); +#286293 = DIRECTION('',(0.708174163982,-0.706037784731,0.)); +#286294 = PLANE('',#286295); +#286295 = AXIS2_PLACEMENT_3D('',#286296,#286297,#286298); +#286296 = CARTESIAN_POINT('',(140.805557,-152.971853,1.51)); +#286297 = DIRECTION('',(0.706037784731,0.708174163982,-0.)); +#286298 = DIRECTION('',(0.708174163982,-0.706037784731,0.)); +#286299 = ADVANCED_FACE('',(#286300),#286306,.F.); +#286300 = FACE_BOUND('',#286301,.T.); +#286301 = EDGE_LOOP('',(#286302,#286303,#286304,#286305)); +#286302 = ORIENTED_EDGE('',*,*,#286203,.T.); +#286303 = ORIENTED_EDGE('',*,*,#286234,.T.); +#286304 = ORIENTED_EDGE('',*,*,#286266,.T.); +#286305 = ORIENTED_EDGE('',*,*,#286289,.T.); +#286306 = PLANE('',#286307); +#286307 = AXIS2_PLACEMENT_3D('',#286308,#286309,#286310); +#286308 = CARTESIAN_POINT('',(0.,0.,1.51)); +#286309 = DIRECTION('',(0.,0.,1.)); +#286310 = DIRECTION('',(1.,0.,-0.)); +#286311 = ADVANCED_FACE('',(#286312),#286318,.T.); +#286312 = FACE_BOUND('',#286313,.F.); +#286313 = EDGE_LOOP('',(#286314,#286315,#286316,#286317)); +#286314 = ORIENTED_EDGE('',*,*,#286187,.T.); +#286315 = ORIENTED_EDGE('',*,*,#286218,.T.); +#286316 = ORIENTED_EDGE('',*,*,#286249,.T.); +#286317 = ORIENTED_EDGE('',*,*,#286282,.T.); +#286318 = PLANE('',#286319); +#286319 = AXIS2_PLACEMENT_3D('',#286320,#286321,#286322); +#286320 = CARTESIAN_POINT('',(0.,0.,1.545)); +#286321 = DIRECTION('',(0.,0.,1.)); +#286322 = DIRECTION('',(1.,0.,-0.)); +#286323 = MANIFOLD_SOLID_BREP('',#286324); +#286324 = CLOSED_SHELL('',(#286325,#286367,#286398,#286431,#286462, + #286493,#286524,#286546,#286561)); +#286325 = ADVANCED_FACE('',(#286326),#286362,.T.); +#286326 = FACE_BOUND('',#286327,.T.); +#286327 = EDGE_LOOP('',(#286328,#286338,#286347,#286355)); +#286328 = ORIENTED_EDGE('',*,*,#286329,.T.); +#286329 = EDGE_CURVE('',#286330,#286332,#286334,.T.); +#286330 = VERTEX_POINT('',#286331); +#286331 = CARTESIAN_POINT('',(134.039442,-152.971853,1.51)); +#286332 = VERTEX_POINT('',#286333); +#286333 = CARTESIAN_POINT('',(134.039442,-152.971853,1.545)); +#286334 = LINE('',#286335,#286336); +#286335 = CARTESIAN_POINT('',(134.039442,-152.971853,1.51)); +#286336 = VECTOR('',#286337,1.); +#286337 = DIRECTION('',(0.,0.,1.)); +#286338 = ORIENTED_EDGE('',*,*,#286339,.T.); +#286339 = EDGE_CURVE('',#286332,#286340,#286342,.T.); +#286340 = VERTEX_POINT('',#286341); +#286341 = CARTESIAN_POINT('',(134.305557,-152.971853,1.545)); +#286342 = CIRCLE('',#286343,0.30122207476); +#286343 = AXIS2_PLACEMENT_3D('',#286344,#286345,#286346); +#286344 = CARTESIAN_POINT('',(134.1724995,-153.2420944476,1.545)); +#286345 = DIRECTION('',(0.,0.,-1.)); +#286346 = DIRECTION('',(-0.441725594334,0.897150210004,0.)); +#286347 = ORIENTED_EDGE('',*,*,#286348,.F.); +#286348 = EDGE_CURVE('',#286349,#286340,#286351,.T.); +#286349 = VERTEX_POINT('',#286350); +#286350 = CARTESIAN_POINT('',(134.305557,-152.971853,1.51)); +#286351 = LINE('',#286352,#286353); +#286352 = CARTESIAN_POINT('',(134.305557,-152.971853,1.51)); +#286353 = VECTOR('',#286354,1.); +#286354 = DIRECTION('',(0.,0.,1.)); +#286355 = ORIENTED_EDGE('',*,*,#286356,.F.); +#286356 = EDGE_CURVE('',#286330,#286349,#286357,.T.); +#286357 = CIRCLE('',#286358,0.30122207476); +#286358 = AXIS2_PLACEMENT_3D('',#286359,#286360,#286361); +#286359 = CARTESIAN_POINT('',(134.1724995,-153.2420944476,1.51)); +#286360 = DIRECTION('',(0.,0.,-1.)); +#286361 = DIRECTION('',(-0.441725594334,0.897150210004,0.)); +#286362 = CYLINDRICAL_SURFACE('',#286363,0.30122207476); +#286363 = AXIS2_PLACEMENT_3D('',#286364,#286365,#286366); +#286364 = CARTESIAN_POINT('',(134.1724995,-153.2420944476,1.51)); +#286365 = DIRECTION('',(0.,0.,-1.)); +#286366 = DIRECTION('',(-0.441725594334,0.897150210004,0.)); +#286367 = ADVANCED_FACE('',(#286368),#286393,.T.); +#286368 = FACE_BOUND('',#286369,.T.); +#286369 = EDGE_LOOP('',(#286370,#286371,#286379,#286387)); +#286370 = ORIENTED_EDGE('',*,*,#286348,.T.); +#286371 = ORIENTED_EDGE('',*,*,#286372,.T.); +#286372 = EDGE_CURVE('',#286340,#286373,#286375,.T.); +#286373 = VERTEX_POINT('',#286374); +#286374 = CARTESIAN_POINT('',(134.333147,-152.999443,1.545)); +#286375 = LINE('',#286376,#286377); +#286376 = CARTESIAN_POINT('',(134.305557,-152.971853,1.545)); +#286377 = VECTOR('',#286378,1.); +#286378 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#286379 = ORIENTED_EDGE('',*,*,#286380,.F.); +#286380 = EDGE_CURVE('',#286381,#286373,#286383,.T.); +#286381 = VERTEX_POINT('',#286382); +#286382 = CARTESIAN_POINT('',(134.333147,-152.999443,1.51)); +#286383 = LINE('',#286384,#286385); +#286384 = CARTESIAN_POINT('',(134.333147,-152.999443,1.51)); +#286385 = VECTOR('',#286386,1.); +#286386 = DIRECTION('',(0.,0.,1.)); +#286387 = ORIENTED_EDGE('',*,*,#286388,.F.); +#286388 = EDGE_CURVE('',#286349,#286381,#286389,.T.); +#286389 = LINE('',#286390,#286391); +#286390 = CARTESIAN_POINT('',(134.305557,-152.971853,1.51)); +#286391 = VECTOR('',#286392,1.); +#286392 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#286393 = PLANE('',#286394); +#286394 = AXIS2_PLACEMENT_3D('',#286395,#286396,#286397); +#286395 = CARTESIAN_POINT('',(134.305557,-152.971853,1.51)); +#286396 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#286397 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#286398 = ADVANCED_FACE('',(#286399),#286426,.T.); +#286399 = FACE_BOUND('',#286400,.T.); +#286400 = EDGE_LOOP('',(#286401,#286402,#286411,#286419)); +#286401 = ORIENTED_EDGE('',*,*,#286380,.T.); +#286402 = ORIENTED_EDGE('',*,*,#286403,.T.); +#286403 = EDGE_CURVE('',#286373,#286404,#286406,.T.); +#286404 = VERTEX_POINT('',#286405); +#286405 = CARTESIAN_POINT('',(134.269509,-153.153079,1.545)); +#286406 = CIRCLE('',#286407,9.999988522638E-02); +#286407 = AXIS2_PLACEMENT_3D('',#286408,#286409,#286410); +#286408 = CARTESIAN_POINT('',(134.25000048592,-153.0550004859,1.545)); +#286409 = DIRECTION('',(0.,0.,-1.)); +#286410 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#286411 = ORIENTED_EDGE('',*,*,#286412,.F.); +#286412 = EDGE_CURVE('',#286413,#286404,#286415,.T.); +#286413 = VERTEX_POINT('',#286414); +#286414 = CARTESIAN_POINT('',(134.269509,-153.153079,1.51)); +#286415 = LINE('',#286416,#286417); +#286416 = CARTESIAN_POINT('',(134.269509,-153.153079,1.51)); +#286417 = VECTOR('',#286418,1.); +#286418 = DIRECTION('',(0.,0.,1.)); +#286419 = ORIENTED_EDGE('',*,*,#286420,.F.); +#286420 = EDGE_CURVE('',#286381,#286413,#286421,.T.); +#286421 = CIRCLE('',#286422,9.999988522638E-02); +#286422 = AXIS2_PLACEMENT_3D('',#286423,#286424,#286425); +#286423 = CARTESIAN_POINT('',(134.25000048592,-153.0550004859,1.51)); +#286424 = DIRECTION('',(0.,0.,-1.)); +#286425 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#286426 = CYLINDRICAL_SURFACE('',#286427,9.999988522638E-02); +#286427 = AXIS2_PLACEMENT_3D('',#286428,#286429,#286430); +#286428 = CARTESIAN_POINT('',(134.25000048592,-153.0550004859,1.51)); +#286429 = DIRECTION('',(0.,0.,-1.)); +#286430 = DIRECTION('',(0.831466095084,0.555575496873,0.)); +#286431 = ADVANCED_FACE('',(#286432),#286457,.T.); +#286432 = FACE_BOUND('',#286433,.T.); +#286433 = EDGE_LOOP('',(#286434,#286435,#286443,#286451)); +#286434 = ORIENTED_EDGE('',*,*,#286412,.T.); +#286435 = ORIENTED_EDGE('',*,*,#286436,.T.); +#286436 = EDGE_CURVE('',#286404,#286437,#286439,.T.); +#286437 = VERTEX_POINT('',#286438); +#286438 = CARTESIAN_POINT('',(134.136421,-153.155,1.545)); +#286439 = LINE('',#286440,#286441); +#286440 = CARTESIAN_POINT('',(134.269509,-153.153079,1.545)); +#286441 = VECTOR('',#286442,1.); +#286442 = DIRECTION('',(-0.99989584525,-1.443255529225E-02,0.)); +#286443 = ORIENTED_EDGE('',*,*,#286444,.F.); +#286444 = EDGE_CURVE('',#286445,#286437,#286447,.T.); +#286445 = VERTEX_POINT('',#286446); +#286446 = CARTESIAN_POINT('',(134.136421,-153.155,1.51)); +#286447 = LINE('',#286448,#286449); +#286448 = CARTESIAN_POINT('',(134.136421,-153.155,1.51)); +#286449 = VECTOR('',#286450,1.); +#286450 = DIRECTION('',(0.,0.,1.)); +#286451 = ORIENTED_EDGE('',*,*,#286452,.F.); +#286452 = EDGE_CURVE('',#286413,#286445,#286453,.T.); +#286453 = LINE('',#286454,#286455); +#286454 = CARTESIAN_POINT('',(134.269509,-153.153079,1.51)); +#286455 = VECTOR('',#286456,1.); +#286456 = DIRECTION('',(-0.99989584525,-1.443255529225E-02,0.)); +#286457 = PLANE('',#286458); +#286458 = AXIS2_PLACEMENT_3D('',#286459,#286460,#286461); +#286459 = CARTESIAN_POINT('',(134.269509,-153.153079,1.51)); +#286460 = DIRECTION('',(1.443255529225E-02,-0.99989584525,0.)); +#286461 = DIRECTION('',(-0.99989584525,-1.443255529225E-02,0.)); +#286462 = ADVANCED_FACE('',(#286463),#286488,.T.); +#286463 = FACE_BOUND('',#286464,.T.); +#286464 = EDGE_LOOP('',(#286465,#286466,#286474,#286482)); +#286465 = ORIENTED_EDGE('',*,*,#286444,.T.); +#286466 = ORIENTED_EDGE('',*,*,#286467,.T.); +#286467 = EDGE_CURVE('',#286437,#286468,#286470,.T.); +#286468 = VERTEX_POINT('',#286469); +#286469 = CARTESIAN_POINT('',(133.4675,-153.822407,1.545)); +#286470 = LINE('',#286471,#286472); +#286471 = CARTESIAN_POINT('',(134.136421,-153.155,1.545)); +#286472 = VECTOR('',#286473,1.); +#286473 = DIRECTION('',(-0.70790744729,-0.706305207451,0.)); +#286474 = ORIENTED_EDGE('',*,*,#286475,.F.); +#286475 = EDGE_CURVE('',#286476,#286468,#286478,.T.); +#286476 = VERTEX_POINT('',#286477); +#286477 = CARTESIAN_POINT('',(133.4675,-153.822407,1.51)); +#286478 = LINE('',#286479,#286480); +#286479 = CARTESIAN_POINT('',(133.4675,-153.822407,1.51)); +#286480 = VECTOR('',#286481,1.); +#286481 = DIRECTION('',(0.,0.,1.)); +#286482 = ORIENTED_EDGE('',*,*,#286483,.F.); +#286483 = EDGE_CURVE('',#286445,#286476,#286484,.T.); +#286484 = LINE('',#286485,#286486); +#286485 = CARTESIAN_POINT('',(134.136421,-153.155,1.51)); +#286486 = VECTOR('',#286487,1.); +#286487 = DIRECTION('',(-0.70790744729,-0.706305207451,0.)); +#286488 = PLANE('',#286489); +#286489 = AXIS2_PLACEMENT_3D('',#286490,#286491,#286492); +#286490 = CARTESIAN_POINT('',(134.136421,-153.155,1.51)); +#286491 = DIRECTION('',(0.706305207451,-0.70790744729,0.)); +#286492 = DIRECTION('',(-0.70790744729,-0.706305207451,0.)); +#286493 = ADVANCED_FACE('',(#286494),#286519,.T.); +#286494 = FACE_BOUND('',#286495,.T.); +#286495 = EDGE_LOOP('',(#286496,#286497,#286505,#286513)); +#286496 = ORIENTED_EDGE('',*,*,#286475,.T.); +#286497 = ORIENTED_EDGE('',*,*,#286498,.T.); +#286498 = EDGE_CURVE('',#286468,#286499,#286501,.T.); +#286499 = VERTEX_POINT('',#286500); +#286500 = CARTESIAN_POINT('',(133.4675,-153.5425,1.545)); +#286501 = LINE('',#286502,#286503); +#286502 = CARTESIAN_POINT('',(133.4675,-153.822407,1.545)); +#286503 = VECTOR('',#286504,1.); +#286504 = DIRECTION('',(0.,1.,0.)); +#286505 = ORIENTED_EDGE('',*,*,#286506,.F.); +#286506 = EDGE_CURVE('',#286507,#286499,#286509,.T.); +#286507 = VERTEX_POINT('',#286508); +#286508 = CARTESIAN_POINT('',(133.4675,-153.5425,1.51)); +#286509 = LINE('',#286510,#286511); +#286510 = CARTESIAN_POINT('',(133.4675,-153.5425,1.51)); +#286511 = VECTOR('',#286512,1.); +#286512 = DIRECTION('',(0.,0.,1.)); +#286513 = ORIENTED_EDGE('',*,*,#286514,.F.); +#286514 = EDGE_CURVE('',#286476,#286507,#286515,.T.); +#286515 = LINE('',#286516,#286517); +#286516 = CARTESIAN_POINT('',(133.4675,-153.822407,1.51)); +#286517 = VECTOR('',#286518,1.); +#286518 = DIRECTION('',(0.,1.,0.)); +#286519 = PLANE('',#286520); +#286520 = AXIS2_PLACEMENT_3D('',#286521,#286522,#286523); +#286521 = CARTESIAN_POINT('',(133.4675,-153.822407,1.51)); +#286522 = DIRECTION('',(-1.,0.,0.)); +#286523 = DIRECTION('',(0.,1.,0.)); +#286524 = ADVANCED_FACE('',(#286525),#286541,.T.); +#286525 = FACE_BOUND('',#286526,.T.); +#286526 = EDGE_LOOP('',(#286527,#286528,#286534,#286535)); +#286527 = ORIENTED_EDGE('',*,*,#286506,.T.); +#286528 = ORIENTED_EDGE('',*,*,#286529,.T.); +#286529 = EDGE_CURVE('',#286499,#286332,#286530,.T.); +#286530 = LINE('',#286531,#286532); +#286531 = CARTESIAN_POINT('',(133.4675,-153.5425,1.545)); +#286532 = VECTOR('',#286533,1.); +#286533 = DIRECTION('',(0.707907754913,0.706304899129,0.)); +#286534 = ORIENTED_EDGE('',*,*,#286329,.F.); +#286535 = ORIENTED_EDGE('',*,*,#286536,.F.); +#286536 = EDGE_CURVE('',#286507,#286330,#286537,.T.); +#286537 = LINE('',#286538,#286539); +#286538 = CARTESIAN_POINT('',(133.4675,-153.5425,1.51)); +#286539 = VECTOR('',#286540,1.); +#286540 = DIRECTION('',(0.707907754913,0.706304899129,0.)); +#286541 = PLANE('',#286542); +#286542 = AXIS2_PLACEMENT_3D('',#286543,#286544,#286545); +#286543 = CARTESIAN_POINT('',(133.4675,-153.5425,1.51)); +#286544 = DIRECTION('',(-0.706304899129,0.707907754913,0.)); +#286545 = DIRECTION('',(0.707907754913,0.706304899129,0.)); +#286546 = ADVANCED_FACE('',(#286547),#286556,.F.); +#286547 = FACE_BOUND('',#286548,.T.); +#286548 = EDGE_LOOP('',(#286549,#286550,#286551,#286552,#286553,#286554, + #286555)); +#286549 = ORIENTED_EDGE('',*,*,#286356,.T.); +#286550 = ORIENTED_EDGE('',*,*,#286388,.T.); +#286551 = ORIENTED_EDGE('',*,*,#286420,.T.); +#286552 = ORIENTED_EDGE('',*,*,#286452,.T.); +#286553 = ORIENTED_EDGE('',*,*,#286483,.T.); +#286554 = ORIENTED_EDGE('',*,*,#286514,.T.); +#286555 = ORIENTED_EDGE('',*,*,#286536,.T.); +#286556 = PLANE('',#286557); +#286557 = AXIS2_PLACEMENT_3D('',#286558,#286559,#286560); +#286558 = CARTESIAN_POINT('',(0.,0.,1.51)); +#286559 = DIRECTION('',(0.,0.,1.)); +#286560 = DIRECTION('',(1.,0.,-0.)); +#286561 = ADVANCED_FACE('',(#286562),#286571,.T.); +#286562 = FACE_BOUND('',#286563,.F.); +#286563 = EDGE_LOOP('',(#286564,#286565,#286566,#286567,#286568,#286569, + #286570)); +#286564 = ORIENTED_EDGE('',*,*,#286339,.T.); +#286565 = ORIENTED_EDGE('',*,*,#286372,.T.); +#286566 = ORIENTED_EDGE('',*,*,#286403,.T.); +#286567 = ORIENTED_EDGE('',*,*,#286436,.T.); +#286568 = ORIENTED_EDGE('',*,*,#286467,.T.); +#286569 = ORIENTED_EDGE('',*,*,#286498,.T.); +#286570 = ORIENTED_EDGE('',*,*,#286529,.T.); +#286571 = PLANE('',#286572); +#286572 = AXIS2_PLACEMENT_3D('',#286573,#286574,#286575); +#286573 = CARTESIAN_POINT('',(0.,0.,1.545)); +#286574 = DIRECTION('',(0.,0.,1.)); +#286575 = DIRECTION('',(1.,0.,-0.)); +#286576 = MANIFOLD_SOLID_BREP('',#286577); +#286577 = CLOSED_SHELL('',(#286578,#286618,#286651,#286682,#286715, + #286746,#286777,#286808,#286841,#286863,#286896,#286916)); +#286578 = ADVANCED_FACE('',(#286579),#286613,.T.); +#286579 = FACE_BOUND('',#286580,.T.); +#286580 = EDGE_LOOP('',(#286581,#286591,#286599,#286607)); +#286581 = ORIENTED_EDGE('',*,*,#286582,.T.); +#286582 = EDGE_CURVE('',#286583,#286585,#286587,.T.); +#286583 = VERTEX_POINT('',#286584); +#286584 = CARTESIAN_POINT('',(126.2695,-153.128078,1.51)); +#286585 = VERTEX_POINT('',#286586); +#286586 = CARTESIAN_POINT('',(126.2695,-153.128078,1.545)); +#286587 = LINE('',#286588,#286589); +#286588 = CARTESIAN_POINT('',(126.2695,-153.128078,1.51)); +#286589 = VECTOR('',#286590,1.); +#286590 = DIRECTION('',(0.,0.,1.)); +#286591 = ORIENTED_EDGE('',*,*,#286592,.T.); +#286592 = EDGE_CURVE('',#286585,#286593,#286595,.T.); +#286593 = VERTEX_POINT('',#286594); +#286594 = CARTESIAN_POINT('',(126.583147,-153.444443,1.545)); +#286595 = LINE('',#286596,#286597); +#286596 = CARTESIAN_POINT('',(126.2695,-153.128078,1.545)); +#286597 = VECTOR('',#286598,1.); +#286598 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#286599 = ORIENTED_EDGE('',*,*,#286600,.F.); +#286600 = EDGE_CURVE('',#286601,#286593,#286603,.T.); +#286601 = VERTEX_POINT('',#286602); +#286602 = CARTESIAN_POINT('',(126.583147,-153.444443,1.51)); +#286603 = LINE('',#286604,#286605); +#286604 = CARTESIAN_POINT('',(126.583147,-153.444443,1.51)); +#286605 = VECTOR('',#286606,1.); +#286606 = DIRECTION('',(0.,0.,1.)); +#286607 = ORIENTED_EDGE('',*,*,#286608,.F.); +#286608 = EDGE_CURVE('',#286583,#286601,#286609,.T.); +#286609 = LINE('',#286610,#286611); +#286610 = CARTESIAN_POINT('',(126.2695,-153.128078,1.51)); +#286611 = VECTOR('',#286612,1.); +#286612 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#286613 = PLANE('',#286614); +#286614 = AXIS2_PLACEMENT_3D('',#286615,#286616,#286617); +#286615 = CARTESIAN_POINT('',(126.2695,-153.128078,1.51)); +#286616 = DIRECTION('',(0.710150775007,0.704049626629,-0.)); +#286617 = DIRECTION('',(0.704049626629,-0.710150775007,0.)); +#286618 = ADVANCED_FACE('',(#286619),#286646,.T.); +#286619 = FACE_BOUND('',#286620,.T.); +#286620 = EDGE_LOOP('',(#286621,#286622,#286631,#286639)); +#286621 = ORIENTED_EDGE('',*,*,#286600,.T.); +#286622 = ORIENTED_EDGE('',*,*,#286623,.T.); +#286623 = EDGE_CURVE('',#286593,#286624,#286626,.T.); +#286624 = VERTEX_POINT('',#286625); +#286625 = CARTESIAN_POINT('',(126.583147,-153.575557,1.545)); +#286626 = CIRCLE('',#286627,0.12572947718); +#286627 = AXIS2_PLACEMENT_3D('',#286628,#286629,#286630); +#286628 = CARTESIAN_POINT('',(126.47586148754,-153.51,1.545)); +#286629 = DIRECTION('',(0.,0.,-1.)); +#286630 = DIRECTION('',(0.853304371119,0.521413128172,0.)); +#286631 = ORIENTED_EDGE('',*,*,#286632,.F.); +#286632 = EDGE_CURVE('',#286633,#286624,#286635,.T.); +#286633 = VERTEX_POINT('',#286634); +#286634 = CARTESIAN_POINT('',(126.583147,-153.575557,1.51)); +#286635 = LINE('',#286636,#286637); +#286636 = CARTESIAN_POINT('',(126.583147,-153.575557,1.51)); +#286637 = VECTOR('',#286638,1.); +#286638 = DIRECTION('',(0.,0.,1.)); +#286639 = ORIENTED_EDGE('',*,*,#286640,.F.); +#286640 = EDGE_CURVE('',#286601,#286633,#286641,.T.); +#286641 = CIRCLE('',#286642,0.12572947718); +#286642 = AXIS2_PLACEMENT_3D('',#286643,#286644,#286645); +#286643 = CARTESIAN_POINT('',(126.47586148754,-153.51,1.51)); +#286644 = DIRECTION('',(0.,0.,-1.)); +#286645 = DIRECTION('',(0.853304371119,0.521413128172,0.)); +#286646 = CYLINDRICAL_SURFACE('',#286647,0.12572947718); +#286647 = AXIS2_PLACEMENT_3D('',#286648,#286649,#286650); +#286648 = CARTESIAN_POINT('',(126.47586148754,-153.51,1.51)); +#286649 = DIRECTION('',(0.,0.,-1.)); +#286650 = DIRECTION('',(0.853304371119,0.521413128172,0.)); +#286651 = ADVANCED_FACE('',(#286652),#286677,.T.); +#286652 = FACE_BOUND('',#286653,.T.); +#286653 = EDGE_LOOP('',(#286654,#286655,#286663,#286671)); +#286654 = ORIENTED_EDGE('',*,*,#286632,.T.); +#286655 = ORIENTED_EDGE('',*,*,#286656,.T.); +#286656 = EDGE_CURVE('',#286624,#286657,#286659,.T.); +#286657 = VERTEX_POINT('',#286658); +#286658 = CARTESIAN_POINT('',(126.555557,-153.603147,1.545)); +#286659 = LINE('',#286660,#286661); +#286660 = CARTESIAN_POINT('',(126.583147,-153.575557,1.545)); +#286661 = VECTOR('',#286662,1.); +#286662 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#286663 = ORIENTED_EDGE('',*,*,#286664,.F.); +#286664 = EDGE_CURVE('',#286665,#286657,#286667,.T.); +#286665 = VERTEX_POINT('',#286666); +#286666 = CARTESIAN_POINT('',(126.555557,-153.603147,1.51)); +#286667 = LINE('',#286668,#286669); +#286668 = CARTESIAN_POINT('',(126.555557,-153.603147,1.51)); +#286669 = VECTOR('',#286670,1.); +#286670 = DIRECTION('',(0.,0.,1.)); +#286671 = ORIENTED_EDGE('',*,*,#286672,.F.); +#286672 = EDGE_CURVE('',#286633,#286665,#286673,.T.); +#286673 = LINE('',#286674,#286675); +#286674 = CARTESIAN_POINT('',(126.583147,-153.575557,1.51)); +#286675 = VECTOR('',#286676,1.); +#286676 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#286677 = PLANE('',#286678); +#286678 = AXIS2_PLACEMENT_3D('',#286679,#286680,#286681); +#286679 = CARTESIAN_POINT('',(126.583147,-153.575557,1.51)); +#286680 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#286681 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#286682 = ADVANCED_FACE('',(#286683),#286710,.T.); +#286683 = FACE_BOUND('',#286684,.T.); +#286684 = EDGE_LOOP('',(#286685,#286686,#286695,#286703)); +#286685 = ORIENTED_EDGE('',*,*,#286664,.T.); +#286686 = ORIENTED_EDGE('',*,*,#286687,.T.); +#286687 = EDGE_CURVE('',#286657,#286688,#286690,.T.); +#286688 = VERTEX_POINT('',#286689); +#286689 = CARTESIAN_POINT('',(126.416853,-153.575557,1.545)); +#286690 = CIRCLE('',#286691,9.999896352768E-02); +#286691 = AXIS2_PLACEMENT_3D('',#286692,#286693,#286694); +#286692 = CARTESIAN_POINT('',(126.49999970871,-153.5200014643,1.545)); +#286693 = DIRECTION('',(-0.,0.,-1.)); +#286694 = DIRECTION('',(0.555578671282,-0.831463973974,-0.)); +#286695 = ORIENTED_EDGE('',*,*,#286696,.F.); +#286696 = EDGE_CURVE('',#286697,#286688,#286699,.T.); +#286697 = VERTEX_POINT('',#286698); +#286698 = CARTESIAN_POINT('',(126.416853,-153.575557,1.51)); +#286699 = LINE('',#286700,#286701); +#286700 = CARTESIAN_POINT('',(126.416853,-153.575557,1.51)); +#286701 = VECTOR('',#286702,1.); +#286702 = DIRECTION('',(0.,0.,1.)); +#286703 = ORIENTED_EDGE('',*,*,#286704,.F.); +#286704 = EDGE_CURVE('',#286665,#286697,#286705,.T.); +#286705 = CIRCLE('',#286706,9.999896352768E-02); +#286706 = AXIS2_PLACEMENT_3D('',#286707,#286708,#286709); +#286707 = CARTESIAN_POINT('',(126.49999970871,-153.5200014643,1.51)); +#286708 = DIRECTION('',(-0.,0.,-1.)); +#286709 = DIRECTION('',(0.555578671282,-0.831463973974,-0.)); +#286710 = CYLINDRICAL_SURFACE('',#286711,9.999896352768E-02); +#286711 = AXIS2_PLACEMENT_3D('',#286712,#286713,#286714); +#286712 = CARTESIAN_POINT('',(126.49999970871,-153.5200014643,1.51)); +#286713 = DIRECTION('',(-0.,0.,-1.)); +#286714 = DIRECTION('',(0.555578671282,-0.831463973974,-0.)); +#286715 = ADVANCED_FACE('',(#286716),#286741,.T.); +#286716 = FACE_BOUND('',#286717,.T.); +#286717 = EDGE_LOOP('',(#286718,#286719,#286727,#286735)); +#286718 = ORIENTED_EDGE('',*,*,#286696,.T.); +#286719 = ORIENTED_EDGE('',*,*,#286720,.T.); +#286720 = EDGE_CURVE('',#286688,#286721,#286723,.T.); +#286721 = VERTEX_POINT('',#286722); +#286722 = CARTESIAN_POINT('',(126.404632,-153.546054,1.545)); +#286723 = LINE('',#286724,#286725); +#286724 = CARTESIAN_POINT('',(126.416853,-153.575557,1.545)); +#286725 = VECTOR('',#286726,1.); +#286726 = DIRECTION('',(-0.382695654535,0.923874469828,0.)); +#286727 = ORIENTED_EDGE('',*,*,#286728,.F.); +#286728 = EDGE_CURVE('',#286729,#286721,#286731,.T.); +#286729 = VERTEX_POINT('',#286730); +#286730 = CARTESIAN_POINT('',(126.404632,-153.546054,1.51)); +#286731 = LINE('',#286732,#286733); +#286732 = CARTESIAN_POINT('',(126.404632,-153.546054,1.51)); +#286733 = VECTOR('',#286734,1.); +#286734 = DIRECTION('',(0.,0.,1.)); +#286735 = ORIENTED_EDGE('',*,*,#286736,.F.); +#286736 = EDGE_CURVE('',#286697,#286729,#286737,.T.); +#286737 = LINE('',#286738,#286739); +#286738 = CARTESIAN_POINT('',(126.416853,-153.575557,1.51)); +#286739 = VECTOR('',#286740,1.); +#286740 = DIRECTION('',(-0.382695654535,0.923874469828,0.)); +#286741 = PLANE('',#286742); +#286742 = AXIS2_PLACEMENT_3D('',#286743,#286744,#286745); +#286743 = CARTESIAN_POINT('',(126.416853,-153.575557,1.51)); +#286744 = DIRECTION('',(-0.923874469828,-0.382695654535,0.)); +#286745 = DIRECTION('',(-0.382695654535,0.923874469828,0.)); +#286746 = ADVANCED_FACE('',(#286747),#286772,.T.); +#286747 = FACE_BOUND('',#286748,.T.); +#286748 = EDGE_LOOP('',(#286749,#286750,#286758,#286766)); +#286749 = ORIENTED_EDGE('',*,*,#286728,.T.); +#286750 = ORIENTED_EDGE('',*,*,#286751,.T.); +#286751 = EDGE_CURVE('',#286721,#286752,#286754,.T.); +#286752 = VERTEX_POINT('',#286753); +#286753 = CARTESIAN_POINT('',(126.128078,-153.2695,1.545)); +#286754 = LINE('',#286755,#286756); +#286755 = CARTESIAN_POINT('',(126.404632,-153.546054,1.545)); +#286756 = VECTOR('',#286757,1.); +#286757 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286758 = ORIENTED_EDGE('',*,*,#286759,.F.); +#286759 = EDGE_CURVE('',#286760,#286752,#286762,.T.); +#286760 = VERTEX_POINT('',#286761); +#286761 = CARTESIAN_POINT('',(126.128078,-153.2695,1.51)); +#286762 = LINE('',#286763,#286764); +#286763 = CARTESIAN_POINT('',(126.128078,-153.2695,1.51)); +#286764 = VECTOR('',#286765,1.); +#286765 = DIRECTION('',(0.,0.,1.)); +#286766 = ORIENTED_EDGE('',*,*,#286767,.F.); +#286767 = EDGE_CURVE('',#286729,#286760,#286768,.T.); +#286768 = LINE('',#286769,#286770); +#286769 = CARTESIAN_POINT('',(126.404632,-153.546054,1.51)); +#286770 = VECTOR('',#286771,1.); +#286771 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286772 = PLANE('',#286773); +#286773 = AXIS2_PLACEMENT_3D('',#286774,#286775,#286776); +#286774 = CARTESIAN_POINT('',(126.404632,-153.546054,1.51)); +#286775 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#286776 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#286777 = ADVANCED_FACE('',(#286778),#286803,.T.); +#286778 = FACE_BOUND('',#286779,.T.); +#286779 = EDGE_LOOP('',(#286780,#286781,#286789,#286797)); +#286780 = ORIENTED_EDGE('',*,*,#286759,.T.); +#286781 = ORIENTED_EDGE('',*,*,#286782,.T.); +#286782 = EDGE_CURVE('',#286752,#286783,#286785,.T.); +#286783 = VERTEX_POINT('',#286784); +#286784 = CARTESIAN_POINT('',(126.114805,-153.277164,1.545)); +#286785 = LINE('',#286786,#286787); +#286786 = CARTESIAN_POINT('',(126.128078,-153.2695,1.545)); +#286787 = VECTOR('',#286788,1.); +#286788 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#286789 = ORIENTED_EDGE('',*,*,#286790,.F.); +#286790 = EDGE_CURVE('',#286791,#286783,#286793,.T.); +#286791 = VERTEX_POINT('',#286792); +#286792 = CARTESIAN_POINT('',(126.114805,-153.277164,1.51)); +#286793 = LINE('',#286794,#286795); +#286794 = CARTESIAN_POINT('',(126.114805,-153.277164,1.51)); +#286795 = VECTOR('',#286796,1.); +#286796 = DIRECTION('',(0.,0.,1.)); +#286797 = ORIENTED_EDGE('',*,*,#286798,.F.); +#286798 = EDGE_CURVE('',#286760,#286791,#286799,.T.); +#286799 = LINE('',#286800,#286801); +#286800 = CARTESIAN_POINT('',(126.128078,-153.2695,1.51)); +#286801 = VECTOR('',#286802,1.); +#286802 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#286803 = PLANE('',#286804); +#286804 = AXIS2_PLACEMENT_3D('',#286805,#286806,#286807); +#286805 = CARTESIAN_POINT('',(126.128078,-153.2695,1.51)); +#286806 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#286807 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#286808 = ADVANCED_FACE('',(#286809),#286836,.T.); +#286809 = FACE_BOUND('',#286810,.T.); +#286810 = EDGE_LOOP('',(#286811,#286812,#286821,#286829)); +#286811 = ORIENTED_EDGE('',*,*,#286790,.T.); +#286812 = ORIENTED_EDGE('',*,*,#286813,.T.); +#286813 = EDGE_CURVE('',#286783,#286814,#286816,.T.); +#286814 = VERTEX_POINT('',#286815); +#286815 = CARTESIAN_POINT('',(126.277164,-153.114805,1.545)); +#286816 = CIRCLE('',#286817,0.300000118202); +#286817 = AXIS2_PLACEMENT_3D('',#286818,#286819,#286820); +#286818 = CARTESIAN_POINT('',(126.,-153.,1.545)); +#286819 = DIRECTION('',(0.,0.,-1.)); +#286820 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#286821 = ORIENTED_EDGE('',*,*,#286822,.F.); +#286822 = EDGE_CURVE('',#286823,#286814,#286825,.T.); +#286823 = VERTEX_POINT('',#286824); +#286824 = CARTESIAN_POINT('',(126.277164,-153.114805,1.51)); +#286825 = LINE('',#286826,#286827); +#286826 = CARTESIAN_POINT('',(126.277164,-153.114805,1.51)); +#286827 = VECTOR('',#286828,1.); +#286828 = DIRECTION('',(0.,0.,1.)); +#286829 = ORIENTED_EDGE('',*,*,#286830,.F.); +#286830 = EDGE_CURVE('',#286791,#286823,#286831,.T.); +#286831 = CIRCLE('',#286832,0.300000118202); +#286832 = AXIS2_PLACEMENT_3D('',#286833,#286834,#286835); +#286833 = CARTESIAN_POINT('',(126.,-153.,1.51)); +#286834 = DIRECTION('',(0.,0.,-1.)); +#286835 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#286836 = CYLINDRICAL_SURFACE('',#286837,0.300000118202); +#286837 = AXIS2_PLACEMENT_3D('',#286838,#286839,#286840); +#286838 = CARTESIAN_POINT('',(126.,-153.,1.51)); +#286839 = DIRECTION('',(0.,0.,-1.)); +#286840 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#286841 = ADVANCED_FACE('',(#286842),#286858,.T.); +#286842 = FACE_BOUND('',#286843,.T.); +#286843 = EDGE_LOOP('',(#286844,#286845,#286851,#286852)); +#286844 = ORIENTED_EDGE('',*,*,#286822,.T.); +#286845 = ORIENTED_EDGE('',*,*,#286846,.T.); +#286846 = EDGE_CURVE('',#286814,#286585,#286847,.T.); +#286847 = LINE('',#286848,#286849); +#286848 = CARTESIAN_POINT('',(126.277164,-153.114805,1.545)); +#286849 = VECTOR('',#286850,1.); +#286850 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#286851 = ORIENTED_EDGE('',*,*,#286582,.F.); +#286852 = ORIENTED_EDGE('',*,*,#286853,.F.); +#286853 = EDGE_CURVE('',#286823,#286583,#286854,.T.); +#286854 = LINE('',#286855,#286856); +#286855 = CARTESIAN_POINT('',(126.277164,-153.114805,1.51)); +#286856 = VECTOR('',#286857,1.); +#286857 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#286858 = PLANE('',#286859); +#286859 = AXIS2_PLACEMENT_3D('',#286860,#286861,#286862); +#286860 = CARTESIAN_POINT('',(126.277164,-153.114805,1.51)); +#286861 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#286862 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#286863 = ADVANCED_FACE('',(#286864),#286891,.F.); +#286864 = FACE_BOUND('',#286865,.T.); +#286865 = EDGE_LOOP('',(#286866,#286876,#286883,#286884)); +#286866 = ORIENTED_EDGE('',*,*,#286867,.T.); +#286867 = EDGE_CURVE('',#286868,#286870,#286872,.T.); +#286868 = VERTEX_POINT('',#286869); +#286869 = CARTESIAN_POINT('',(126.137255,-153.,1.51)); +#286870 = VERTEX_POINT('',#286871); +#286871 = CARTESIAN_POINT('',(126.137255,-153.,1.545)); +#286872 = LINE('',#286873,#286874); +#286873 = CARTESIAN_POINT('',(126.137255,-153.,1.51)); +#286874 = VECTOR('',#286875,1.); +#286875 = DIRECTION('',(0.,0.,1.)); +#286876 = ORIENTED_EDGE('',*,*,#286877,.T.); +#286877 = EDGE_CURVE('',#286870,#286870,#286878,.T.); +#286878 = CIRCLE('',#286879,0.137255); +#286879 = AXIS2_PLACEMENT_3D('',#286880,#286881,#286882); +#286880 = CARTESIAN_POINT('',(126.,-153.,1.545)); +#286881 = DIRECTION('',(0.,0.,1.)); +#286882 = DIRECTION('',(1.,0.,-0.)); +#286883 = ORIENTED_EDGE('',*,*,#286867,.F.); +#286884 = ORIENTED_EDGE('',*,*,#286885,.F.); +#286885 = EDGE_CURVE('',#286868,#286868,#286886,.T.); +#286886 = CIRCLE('',#286887,0.137255); +#286887 = AXIS2_PLACEMENT_3D('',#286888,#286889,#286890); +#286888 = CARTESIAN_POINT('',(126.,-153.,1.51)); +#286889 = DIRECTION('',(0.,0.,1.)); +#286890 = DIRECTION('',(1.,0.,-0.)); +#286891 = CYLINDRICAL_SURFACE('',#286892,0.137255); +#286892 = AXIS2_PLACEMENT_3D('',#286893,#286894,#286895); +#286893 = CARTESIAN_POINT('',(126.,-153.,1.51)); +#286894 = DIRECTION('',(-0.,-0.,-1.)); +#286895 = DIRECTION('',(1.,0.,-0.)); +#286896 = ADVANCED_FACE('',(#286897,#286908),#286911,.F.); +#286897 = FACE_BOUND('',#286898,.T.); +#286898 = EDGE_LOOP('',(#286899,#286900,#286901,#286902,#286903,#286904, + #286905,#286906,#286907)); +#286899 = ORIENTED_EDGE('',*,*,#286608,.T.); +#286900 = ORIENTED_EDGE('',*,*,#286640,.T.); +#286901 = ORIENTED_EDGE('',*,*,#286672,.T.); +#286902 = ORIENTED_EDGE('',*,*,#286704,.T.); +#286903 = ORIENTED_EDGE('',*,*,#286736,.T.); +#286904 = ORIENTED_EDGE('',*,*,#286767,.T.); +#286905 = ORIENTED_EDGE('',*,*,#286798,.T.); +#286906 = ORIENTED_EDGE('',*,*,#286830,.T.); +#286907 = ORIENTED_EDGE('',*,*,#286853,.T.); +#286908 = FACE_BOUND('',#286909,.T.); +#286909 = EDGE_LOOP('',(#286910)); +#286910 = ORIENTED_EDGE('',*,*,#286885,.T.); +#286911 = PLANE('',#286912); +#286912 = AXIS2_PLACEMENT_3D('',#286913,#286914,#286915); +#286913 = CARTESIAN_POINT('',(0.,0.,1.51)); +#286914 = DIRECTION('',(0.,0.,1.)); +#286915 = DIRECTION('',(1.,0.,-0.)); +#286916 = ADVANCED_FACE('',(#286917,#286928),#286931,.T.); +#286917 = FACE_BOUND('',#286918,.F.); +#286918 = EDGE_LOOP('',(#286919,#286920,#286921,#286922,#286923,#286924, + #286925,#286926,#286927)); +#286919 = ORIENTED_EDGE('',*,*,#286592,.T.); +#286920 = ORIENTED_EDGE('',*,*,#286623,.T.); +#286921 = ORIENTED_EDGE('',*,*,#286656,.T.); +#286922 = ORIENTED_EDGE('',*,*,#286687,.T.); +#286923 = ORIENTED_EDGE('',*,*,#286720,.T.); +#286924 = ORIENTED_EDGE('',*,*,#286751,.T.); +#286925 = ORIENTED_EDGE('',*,*,#286782,.T.); +#286926 = ORIENTED_EDGE('',*,*,#286813,.T.); +#286927 = ORIENTED_EDGE('',*,*,#286846,.T.); +#286928 = FACE_BOUND('',#286929,.F.); +#286929 = EDGE_LOOP('',(#286930)); +#286930 = ORIENTED_EDGE('',*,*,#286877,.T.); +#286931 = PLANE('',#286932); +#286932 = AXIS2_PLACEMENT_3D('',#286933,#286934,#286935); +#286933 = CARTESIAN_POINT('',(0.,0.,1.545)); +#286934 = DIRECTION('',(0.,0.,1.)); +#286935 = DIRECTION('',(1.,0.,-0.)); +#286936 = MANIFOLD_SOLID_BREP('',#286937); +#286937 = CLOSED_SHELL('',(#286938,#286980,#287011,#287042,#287073, + #287104,#287137,#287168,#287199,#287221,#287254,#287274)); +#286938 = ADVANCED_FACE('',(#286939),#286975,.T.); +#286939 = FACE_BOUND('',#286940,.T.); +#286940 = EDGE_LOOP('',(#286941,#286951,#286960,#286968)); +#286941 = ORIENTED_EDGE('',*,*,#286942,.T.); +#286942 = EDGE_CURVE('',#286943,#286945,#286947,.T.); +#286943 = VERTEX_POINT('',#286944); +#286944 = CARTESIAN_POINT('',(144.740491,-152.848079,1.51)); +#286945 = VERTEX_POINT('',#286946); +#286946 = CARTESIAN_POINT('',(144.740491,-152.848079,1.545)); +#286947 = LINE('',#286948,#286949); +#286948 = CARTESIAN_POINT('',(144.740491,-152.848079,1.51)); +#286949 = VECTOR('',#286950,1.); +#286950 = DIRECTION('',(0.,0.,1.)); +#286951 = ORIENTED_EDGE('',*,*,#286952,.T.); +#286952 = EDGE_CURVE('',#286945,#286953,#286955,.T.); +#286953 = VERTEX_POINT('',#286954); +#286954 = CARTESIAN_POINT('',(144.740491,-152.651921,1.545)); +#286955 = CIRCLE('',#286956,0.100000456609); +#286956 = AXIS2_PLACEMENT_3D('',#286957,#286958,#286959); +#286957 = CARTESIAN_POINT('',(144.76,-152.75,1.545)); +#286958 = DIRECTION('',(0.,0.,-1.)); +#286959 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286960 = ORIENTED_EDGE('',*,*,#286961,.F.); +#286961 = EDGE_CURVE('',#286962,#286953,#286964,.T.); +#286962 = VERTEX_POINT('',#286963); +#286963 = CARTESIAN_POINT('',(144.740491,-152.651921,1.51)); +#286964 = LINE('',#286965,#286966); +#286965 = CARTESIAN_POINT('',(144.740491,-152.651921,1.51)); +#286966 = VECTOR('',#286967,1.); +#286967 = DIRECTION('',(0.,0.,1.)); +#286968 = ORIENTED_EDGE('',*,*,#286969,.F.); +#286969 = EDGE_CURVE('',#286943,#286962,#286970,.T.); +#286970 = CIRCLE('',#286971,0.100000456609); +#286971 = AXIS2_PLACEMENT_3D('',#286972,#286973,#286974); +#286972 = CARTESIAN_POINT('',(144.76,-152.75,1.51)); +#286973 = DIRECTION('',(0.,0.,-1.)); +#286974 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286975 = CYLINDRICAL_SURFACE('',#286976,0.100000456609); +#286976 = AXIS2_PLACEMENT_3D('',#286977,#286978,#286979); +#286977 = CARTESIAN_POINT('',(144.76,-152.75,1.51)); +#286978 = DIRECTION('',(0.,0.,-1.)); +#286979 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#286980 = ADVANCED_FACE('',(#286981),#287006,.T.); +#286981 = FACE_BOUND('',#286982,.T.); +#286982 = EDGE_LOOP('',(#286983,#286984,#286992,#287000)); +#286983 = ORIENTED_EDGE('',*,*,#286961,.T.); +#286984 = ORIENTED_EDGE('',*,*,#286985,.T.); +#286985 = EDGE_CURVE('',#286953,#286986,#286988,.T.); +#286986 = VERTEX_POINT('',#286987); +#286987 = CARTESIAN_POINT('',(145.269509,-152.651921,1.545)); +#286988 = LINE('',#286989,#286990); +#286989 = CARTESIAN_POINT('',(144.740491,-152.651921,1.545)); +#286990 = VECTOR('',#286991,1.); +#286991 = DIRECTION('',(1.,0.,0.)); +#286992 = ORIENTED_EDGE('',*,*,#286993,.F.); +#286993 = EDGE_CURVE('',#286994,#286986,#286996,.T.); +#286994 = VERTEX_POINT('',#286995); +#286995 = CARTESIAN_POINT('',(145.269509,-152.651921,1.51)); +#286996 = LINE('',#286997,#286998); +#286997 = CARTESIAN_POINT('',(145.269509,-152.651921,1.51)); +#286998 = VECTOR('',#286999,1.); +#286999 = DIRECTION('',(0.,0.,1.)); +#287000 = ORIENTED_EDGE('',*,*,#287001,.F.); +#287001 = EDGE_CURVE('',#286962,#286994,#287002,.T.); +#287002 = LINE('',#287003,#287004); +#287003 = CARTESIAN_POINT('',(144.740491,-152.651921,1.51)); +#287004 = VECTOR('',#287005,1.); +#287005 = DIRECTION('',(1.,0.,0.)); +#287006 = PLANE('',#287007); +#287007 = AXIS2_PLACEMENT_3D('',#287008,#287009,#287010); +#287008 = CARTESIAN_POINT('',(144.740491,-152.651921,1.51)); +#287009 = DIRECTION('',(0.,1.,0.)); +#287010 = DIRECTION('',(1.,0.,0.)); +#287011 = ADVANCED_FACE('',(#287012),#287037,.T.); +#287012 = FACE_BOUND('',#287013,.T.); +#287013 = EDGE_LOOP('',(#287014,#287015,#287023,#287031)); +#287014 = ORIENTED_EDGE('',*,*,#286993,.T.); +#287015 = ORIENTED_EDGE('',*,*,#287016,.T.); +#287016 = EDGE_CURVE('',#286986,#287017,#287019,.T.); +#287017 = VERTEX_POINT('',#287018); +#287018 = CARTESIAN_POINT('',(145.305557,-152.666853,1.545)); +#287019 = LINE('',#287020,#287021); +#287020 = CARTESIAN_POINT('',(145.269509,-152.651921,1.545)); +#287021 = VECTOR('',#287022,1.); +#287022 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#287023 = ORIENTED_EDGE('',*,*,#287024,.F.); +#287024 = EDGE_CURVE('',#287025,#287017,#287027,.T.); +#287025 = VERTEX_POINT('',#287026); +#287026 = CARTESIAN_POINT('',(145.305557,-152.666853,1.51)); +#287027 = LINE('',#287028,#287029); +#287028 = CARTESIAN_POINT('',(145.305557,-152.666853,1.51)); +#287029 = VECTOR('',#287030,1.); +#287030 = DIRECTION('',(0.,0.,1.)); +#287031 = ORIENTED_EDGE('',*,*,#287032,.F.); +#287032 = EDGE_CURVE('',#286994,#287025,#287033,.T.); +#287033 = LINE('',#287034,#287035); +#287034 = CARTESIAN_POINT('',(145.269509,-152.651921,1.51)); +#287035 = VECTOR('',#287036,1.); +#287036 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#287037 = PLANE('',#287038); +#287038 = AXIS2_PLACEMENT_3D('',#287039,#287040,#287041); +#287039 = CARTESIAN_POINT('',(145.269509,-152.651921,1.51)); +#287040 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#287041 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#287042 = ADVANCED_FACE('',(#287043),#287068,.T.); +#287043 = FACE_BOUND('',#287044,.T.); +#287044 = EDGE_LOOP('',(#287045,#287046,#287054,#287062)); +#287045 = ORIENTED_EDGE('',*,*,#287024,.T.); +#287046 = ORIENTED_EDGE('',*,*,#287047,.T.); +#287047 = EDGE_CURVE('',#287017,#287048,#287050,.T.); +#287048 = VERTEX_POINT('',#287049); +#287049 = CARTESIAN_POINT('',(145.671921,-153.030499,1.545)); +#287050 = LINE('',#287051,#287052); +#287051 = CARTESIAN_POINT('',(145.305557,-152.666853,1.545)); +#287052 = VECTOR('',#287053,1.); +#287053 = DIRECTION('',(0.709734587755,-0.704469172459,0.)); +#287054 = ORIENTED_EDGE('',*,*,#287055,.F.); +#287055 = EDGE_CURVE('',#287056,#287048,#287058,.T.); +#287056 = VERTEX_POINT('',#287057); +#287057 = CARTESIAN_POINT('',(145.671921,-153.030499,1.51)); +#287058 = LINE('',#287059,#287060); +#287059 = CARTESIAN_POINT('',(145.671921,-153.030499,1.51)); +#287060 = VECTOR('',#287061,1.); +#287061 = DIRECTION('',(0.,0.,1.)); +#287062 = ORIENTED_EDGE('',*,*,#287063,.F.); +#287063 = EDGE_CURVE('',#287025,#287056,#287064,.T.); +#287064 = LINE('',#287065,#287066); +#287065 = CARTESIAN_POINT('',(145.305557,-152.666853,1.51)); +#287066 = VECTOR('',#287067,1.); +#287067 = DIRECTION('',(0.709734587755,-0.704469172459,0.)); +#287068 = PLANE('',#287069); +#287069 = AXIS2_PLACEMENT_3D('',#287070,#287071,#287072); +#287070 = CARTESIAN_POINT('',(145.305557,-152.666853,1.51)); +#287071 = DIRECTION('',(0.704469172459,0.709734587755,-0.)); +#287072 = DIRECTION('',(0.709734587755,-0.704469172459,0.)); +#287073 = ADVANCED_FACE('',(#287074),#287099,.T.); +#287074 = FACE_BOUND('',#287075,.T.); +#287075 = EDGE_LOOP('',(#287076,#287077,#287085,#287093)); +#287076 = ORIENTED_EDGE('',*,*,#287055,.T.); +#287077 = ORIENTED_EDGE('',*,*,#287078,.T.); +#287078 = EDGE_CURVE('',#287048,#287079,#287081,.T.); +#287079 = VERTEX_POINT('',#287080); +#287080 = CARTESIAN_POINT('',(145.685195,-153.022836,1.545)); +#287081 = LINE('',#287082,#287083); +#287082 = CARTESIAN_POINT('',(145.671921,-153.030499,1.545)); +#287083 = VECTOR('',#287084,1.); +#287084 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#287085 = ORIENTED_EDGE('',*,*,#287086,.F.); +#287086 = EDGE_CURVE('',#287087,#287079,#287089,.T.); +#287087 = VERTEX_POINT('',#287088); +#287088 = CARTESIAN_POINT('',(145.685195,-153.022836,1.51)); +#287089 = LINE('',#287090,#287091); +#287090 = CARTESIAN_POINT('',(145.685195,-153.022836,1.51)); +#287091 = VECTOR('',#287092,1.); +#287092 = DIRECTION('',(0.,0.,1.)); +#287093 = ORIENTED_EDGE('',*,*,#287094,.F.); +#287094 = EDGE_CURVE('',#287056,#287087,#287095,.T.); +#287095 = LINE('',#287096,#287097); +#287096 = CARTESIAN_POINT('',(145.671921,-153.030499,1.51)); +#287097 = VECTOR('',#287098,1.); +#287098 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#287099 = PLANE('',#287100); +#287100 = AXIS2_PLACEMENT_3D('',#287101,#287102,#287103); +#287101 = CARTESIAN_POINT('',(145.671921,-153.030499,1.51)); +#287102 = DIRECTION('',(-0.499963423545,0.866046520181,0.)); +#287103 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#287104 = ADVANCED_FACE('',(#287105),#287132,.T.); +#287105 = FACE_BOUND('',#287106,.T.); +#287106 = EDGE_LOOP('',(#287107,#287108,#287117,#287125)); +#287107 = ORIENTED_EDGE('',*,*,#287086,.T.); +#287108 = ORIENTED_EDGE('',*,*,#287109,.T.); +#287109 = EDGE_CURVE('',#287079,#287110,#287112,.T.); +#287110 = VERTEX_POINT('',#287111); +#287111 = CARTESIAN_POINT('',(145.522836,-153.185195,1.545)); +#287112 = CIRCLE('',#287113,0.299999934501); +#287113 = AXIS2_PLACEMENT_3D('',#287114,#287115,#287116); +#287114 = CARTESIAN_POINT('',(145.7999998594,-153.2999998594,1.545)); +#287115 = DIRECTION('',(-0.,0.,-1.)); +#287116 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#287117 = ORIENTED_EDGE('',*,*,#287118,.F.); +#287118 = EDGE_CURVE('',#287119,#287110,#287121,.T.); +#287119 = VERTEX_POINT('',#287120); +#287120 = CARTESIAN_POINT('',(145.522836,-153.185195,1.51)); +#287121 = LINE('',#287122,#287123); +#287122 = CARTESIAN_POINT('',(145.522836,-153.185195,1.51)); +#287123 = VECTOR('',#287124,1.); +#287124 = DIRECTION('',(0.,0.,1.)); +#287125 = ORIENTED_EDGE('',*,*,#287126,.F.); +#287126 = EDGE_CURVE('',#287087,#287119,#287127,.T.); +#287127 = CIRCLE('',#287128,0.299999934501); +#287128 = AXIS2_PLACEMENT_3D('',#287129,#287130,#287131); +#287129 = CARTESIAN_POINT('',(145.7999998594,-153.2999998594,1.51)); +#287130 = DIRECTION('',(-0.,0.,-1.)); +#287131 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#287132 = CYLINDRICAL_SURFACE('',#287133,0.299999934501); +#287133 = AXIS2_PLACEMENT_3D('',#287134,#287135,#287136); +#287134 = CARTESIAN_POINT('',(145.7999998594,-153.2999998594,1.51)); +#287135 = DIRECTION('',(-0.,0.,-1.)); +#287136 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#287137 = ADVANCED_FACE('',(#287138),#287163,.T.); +#287138 = FACE_BOUND('',#287139,.T.); +#287139 = EDGE_LOOP('',(#287140,#287141,#287149,#287157)); +#287140 = ORIENTED_EDGE('',*,*,#287118,.T.); +#287141 = ORIENTED_EDGE('',*,*,#287142,.T.); +#287142 = EDGE_CURVE('',#287110,#287143,#287145,.T.); +#287143 = VERTEX_POINT('',#287144); +#287144 = CARTESIAN_POINT('',(145.530499,-153.171921,1.545)); +#287145 = LINE('',#287146,#287147); +#287146 = CARTESIAN_POINT('',(145.522836,-153.185195,1.545)); +#287147 = VECTOR('',#287148,1.); +#287148 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#287149 = ORIENTED_EDGE('',*,*,#287150,.F.); +#287150 = EDGE_CURVE('',#287151,#287143,#287153,.T.); +#287151 = VERTEX_POINT('',#287152); +#287152 = CARTESIAN_POINT('',(145.530499,-153.171921,1.51)); +#287153 = LINE('',#287154,#287155); +#287154 = CARTESIAN_POINT('',(145.530499,-153.171921,1.51)); +#287155 = VECTOR('',#287156,1.); +#287156 = DIRECTION('',(0.,0.,1.)); +#287157 = ORIENTED_EDGE('',*,*,#287158,.F.); +#287158 = EDGE_CURVE('',#287119,#287151,#287159,.T.); +#287159 = LINE('',#287160,#287161); +#287160 = CARTESIAN_POINT('',(145.522836,-153.185195,1.51)); +#287161 = VECTOR('',#287162,1.); +#287162 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#287163 = PLANE('',#287164); +#287164 = AXIS2_PLACEMENT_3D('',#287165,#287166,#287167); +#287165 = CARTESIAN_POINT('',(145.522836,-153.185195,1.51)); +#287166 = DIRECTION('',(-0.866046520181,0.499963423545,0.)); +#287167 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#287168 = ADVANCED_FACE('',(#287169),#287194,.T.); +#287169 = FACE_BOUND('',#287170,.T.); +#287170 = EDGE_LOOP('',(#287171,#287172,#287180,#287188)); +#287171 = ORIENTED_EDGE('',*,*,#287150,.T.); +#287172 = ORIENTED_EDGE('',*,*,#287173,.T.); +#287173 = EDGE_CURVE('',#287143,#287174,#287176,.T.); +#287174 = VERTEX_POINT('',#287175); +#287175 = CARTESIAN_POINT('',(145.208578,-152.85,1.545)); +#287176 = LINE('',#287177,#287178); +#287177 = CARTESIAN_POINT('',(145.530499,-153.171921,1.545)); +#287178 = VECTOR('',#287179,1.); +#287179 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#287180 = ORIENTED_EDGE('',*,*,#287181,.F.); +#287181 = EDGE_CURVE('',#287182,#287174,#287184,.T.); +#287182 = VERTEX_POINT('',#287183); +#287183 = CARTESIAN_POINT('',(145.208578,-152.85,1.51)); +#287184 = LINE('',#287185,#287186); +#287185 = CARTESIAN_POINT('',(145.208578,-152.85,1.51)); +#287186 = VECTOR('',#287187,1.); +#287187 = DIRECTION('',(0.,0.,1.)); +#287188 = ORIENTED_EDGE('',*,*,#287189,.F.); +#287189 = EDGE_CURVE('',#287151,#287182,#287190,.T.); +#287190 = LINE('',#287191,#287192); +#287191 = CARTESIAN_POINT('',(145.530499,-153.171921,1.51)); +#287192 = VECTOR('',#287193,1.); +#287193 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#287194 = PLANE('',#287195); +#287195 = AXIS2_PLACEMENT_3D('',#287196,#287197,#287198); +#287196 = CARTESIAN_POINT('',(145.530499,-153.171921,1.51)); +#287197 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#287198 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#287199 = ADVANCED_FACE('',(#287200),#287216,.T.); +#287200 = FACE_BOUND('',#287201,.T.); +#287201 = EDGE_LOOP('',(#287202,#287203,#287209,#287210)); +#287202 = ORIENTED_EDGE('',*,*,#287181,.T.); +#287203 = ORIENTED_EDGE('',*,*,#287204,.T.); +#287204 = EDGE_CURVE('',#287174,#286945,#287205,.T.); +#287205 = LINE('',#287206,#287207); +#287206 = CARTESIAN_POINT('',(145.208578,-152.85,1.545)); +#287207 = VECTOR('',#287208,1.); +#287208 = DIRECTION('',(-0.999991578953,4.103903383667E-03,0.)); +#287209 = ORIENTED_EDGE('',*,*,#286942,.F.); +#287210 = ORIENTED_EDGE('',*,*,#287211,.F.); +#287211 = EDGE_CURVE('',#287182,#286943,#287212,.T.); +#287212 = LINE('',#287213,#287214); +#287213 = CARTESIAN_POINT('',(145.208578,-152.85,1.51)); +#287214 = VECTOR('',#287215,1.); +#287215 = DIRECTION('',(-0.999991578953,4.103903383667E-03,0.)); +#287216 = PLANE('',#287217); +#287217 = AXIS2_PLACEMENT_3D('',#287218,#287219,#287220); +#287218 = CARTESIAN_POINT('',(145.208578,-152.85,1.51)); +#287219 = DIRECTION('',(-4.103903383667E-03,-0.999991578953,0.)); +#287220 = DIRECTION('',(-0.999991578953,4.103903383667E-03,0.)); +#287221 = ADVANCED_FACE('',(#287222),#287249,.F.); +#287222 = FACE_BOUND('',#287223,.T.); +#287223 = EDGE_LOOP('',(#287224,#287234,#287241,#287242)); +#287224 = ORIENTED_EDGE('',*,*,#287225,.T.); +#287225 = EDGE_CURVE('',#287226,#287228,#287230,.T.); +#287226 = VERTEX_POINT('',#287227); +#287227 = CARTESIAN_POINT('',(145.937255,-153.3,1.51)); +#287228 = VERTEX_POINT('',#287229); +#287229 = CARTESIAN_POINT('',(145.937255,-153.3,1.545)); +#287230 = LINE('',#287231,#287232); +#287231 = CARTESIAN_POINT('',(145.937255,-153.3,1.51)); +#287232 = VECTOR('',#287233,1.); +#287233 = DIRECTION('',(0.,0.,1.)); +#287234 = ORIENTED_EDGE('',*,*,#287235,.T.); +#287235 = EDGE_CURVE('',#287228,#287228,#287236,.T.); +#287236 = CIRCLE('',#287237,0.137255); +#287237 = AXIS2_PLACEMENT_3D('',#287238,#287239,#287240); +#287238 = CARTESIAN_POINT('',(145.8,-153.3,1.545)); +#287239 = DIRECTION('',(0.,0.,1.)); +#287240 = DIRECTION('',(1.,0.,-0.)); +#287241 = ORIENTED_EDGE('',*,*,#287225,.F.); +#287242 = ORIENTED_EDGE('',*,*,#287243,.F.); +#287243 = EDGE_CURVE('',#287226,#287226,#287244,.T.); +#287244 = CIRCLE('',#287245,0.137255); +#287245 = AXIS2_PLACEMENT_3D('',#287246,#287247,#287248); +#287246 = CARTESIAN_POINT('',(145.8,-153.3,1.51)); +#287247 = DIRECTION('',(0.,0.,1.)); +#287248 = DIRECTION('',(1.,0.,-0.)); +#287249 = CYLINDRICAL_SURFACE('',#287250,0.137255); +#287250 = AXIS2_PLACEMENT_3D('',#287251,#287252,#287253); +#287251 = CARTESIAN_POINT('',(145.8,-153.3,1.51)); +#287252 = DIRECTION('',(-0.,-0.,-1.)); +#287253 = DIRECTION('',(1.,0.,-0.)); +#287254 = ADVANCED_FACE('',(#287255,#287266),#287269,.F.); +#287255 = FACE_BOUND('',#287256,.T.); +#287256 = EDGE_LOOP('',(#287257,#287258,#287259,#287260,#287261,#287262, + #287263,#287264,#287265)); +#287257 = ORIENTED_EDGE('',*,*,#286969,.T.); +#287258 = ORIENTED_EDGE('',*,*,#287001,.T.); +#287259 = ORIENTED_EDGE('',*,*,#287032,.T.); +#287260 = ORIENTED_EDGE('',*,*,#287063,.T.); +#287261 = ORIENTED_EDGE('',*,*,#287094,.T.); +#287262 = ORIENTED_EDGE('',*,*,#287126,.T.); +#287263 = ORIENTED_EDGE('',*,*,#287158,.T.); +#287264 = ORIENTED_EDGE('',*,*,#287189,.T.); +#287265 = ORIENTED_EDGE('',*,*,#287211,.T.); +#287266 = FACE_BOUND('',#287267,.T.); +#287267 = EDGE_LOOP('',(#287268)); +#287268 = ORIENTED_EDGE('',*,*,#287243,.T.); +#287269 = PLANE('',#287270); +#287270 = AXIS2_PLACEMENT_3D('',#287271,#287272,#287273); +#287271 = CARTESIAN_POINT('',(0.,0.,1.51)); +#287272 = DIRECTION('',(0.,0.,1.)); +#287273 = DIRECTION('',(1.,0.,-0.)); +#287274 = ADVANCED_FACE('',(#287275,#287286),#287289,.T.); +#287275 = FACE_BOUND('',#287276,.F.); +#287276 = EDGE_LOOP('',(#287277,#287278,#287279,#287280,#287281,#287282, + #287283,#287284,#287285)); +#287277 = ORIENTED_EDGE('',*,*,#286952,.T.); +#287278 = ORIENTED_EDGE('',*,*,#286985,.T.); +#287279 = ORIENTED_EDGE('',*,*,#287016,.T.); +#287280 = ORIENTED_EDGE('',*,*,#287047,.T.); +#287281 = ORIENTED_EDGE('',*,*,#287078,.T.); +#287282 = ORIENTED_EDGE('',*,*,#287109,.T.); +#287283 = ORIENTED_EDGE('',*,*,#287142,.T.); +#287284 = ORIENTED_EDGE('',*,*,#287173,.T.); +#287285 = ORIENTED_EDGE('',*,*,#287204,.T.); +#287286 = FACE_BOUND('',#287287,.F.); +#287287 = EDGE_LOOP('',(#287288)); +#287288 = ORIENTED_EDGE('',*,*,#287235,.T.); +#287289 = PLANE('',#287290); +#287290 = AXIS2_PLACEMENT_3D('',#287291,#287292,#287293); +#287291 = CARTESIAN_POINT('',(0.,0.,1.545)); +#287292 = DIRECTION('',(0.,0.,1.)); +#287293 = DIRECTION('',(1.,0.,-0.)); +#287294 = MANIFOLD_SOLID_BREP('',#287295); +#287295 = CLOSED_SHELL('',(#287296,#287338,#287369,#287400,#287431, + #287464,#287495,#287526,#287557,#287590,#287621,#287652,#287683, + #287714,#287745,#287776,#287807,#287829,#287862,#287890)); +#287296 = ADVANCED_FACE('',(#287297),#287333,.T.); +#287297 = FACE_BOUND('',#287298,.T.); +#287298 = EDGE_LOOP('',(#287299,#287309,#287318,#287326)); +#287299 = ORIENTED_EDGE('',*,*,#287300,.T.); +#287300 = EDGE_CURVE('',#287301,#287303,#287305,.T.); +#287301 = VERTEX_POINT('',#287302); +#287302 = CARTESIAN_POINT('',(151.594443,-145.441853,1.51)); +#287303 = VERTEX_POINT('',#287304); +#287304 = CARTESIAN_POINT('',(151.594443,-145.441853,1.545)); +#287305 = LINE('',#287306,#287307); +#287306 = CARTESIAN_POINT('',(151.594443,-145.441853,1.51)); +#287307 = VECTOR('',#287308,1.); +#287308 = DIRECTION('',(0.,0.,1.)); +#287309 = ORIENTED_EDGE('',*,*,#287310,.T.); +#287310 = EDGE_CURVE('',#287303,#287311,#287313,.T.); +#287311 = VERTEX_POINT('',#287312); +#287312 = CARTESIAN_POINT('',(151.748079,-145.505491,1.545)); +#287313 = CIRCLE('',#287314,0.100000590676); +#287314 = AXIS2_PLACEMENT_3D('',#287315,#287316,#287317); +#287315 = CARTESIAN_POINT('',(151.65,-145.5250006871,1.545)); +#287316 = DIRECTION('',(0.,0.,-1.)); +#287317 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#287318 = ORIENTED_EDGE('',*,*,#287319,.F.); +#287319 = EDGE_CURVE('',#287320,#287311,#287322,.T.); +#287320 = VERTEX_POINT('',#287321); +#287321 = CARTESIAN_POINT('',(151.748079,-145.505491,1.51)); +#287322 = LINE('',#287323,#287324); +#287323 = CARTESIAN_POINT('',(151.748079,-145.505491,1.51)); +#287324 = VECTOR('',#287325,1.); +#287325 = DIRECTION('',(0.,0.,1.)); +#287326 = ORIENTED_EDGE('',*,*,#287327,.F.); +#287327 = EDGE_CURVE('',#287301,#287320,#287328,.T.); +#287328 = CIRCLE('',#287329,0.100000590676); +#287329 = AXIS2_PLACEMENT_3D('',#287330,#287331,#287332); +#287330 = CARTESIAN_POINT('',(151.65,-145.5250006871,1.51)); +#287331 = DIRECTION('',(0.,0.,-1.)); +#287332 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#287333 = CYLINDRICAL_SURFACE('',#287334,0.100000590676); +#287334 = AXIS2_PLACEMENT_3D('',#287335,#287336,#287337); +#287335 = CARTESIAN_POINT('',(151.65,-145.5250006871,1.51)); +#287336 = DIRECTION('',(0.,0.,-1.)); +#287337 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#287338 = ADVANCED_FACE('',(#287339),#287364,.T.); +#287339 = FACE_BOUND('',#287340,.T.); +#287340 = EDGE_LOOP('',(#287341,#287342,#287350,#287358)); +#287341 = ORIENTED_EDGE('',*,*,#287319,.T.); +#287342 = ORIENTED_EDGE('',*,*,#287343,.T.); +#287343 = EDGE_CURVE('',#287311,#287344,#287346,.T.); +#287344 = VERTEX_POINT('',#287345); +#287345 = CARTESIAN_POINT('',(151.748079,-151.094509,1.545)); +#287346 = LINE('',#287347,#287348); +#287347 = CARTESIAN_POINT('',(151.748079,-145.505491,1.545)); +#287348 = VECTOR('',#287349,1.); +#287349 = DIRECTION('',(0.,-1.,0.)); +#287350 = ORIENTED_EDGE('',*,*,#287351,.F.); +#287351 = EDGE_CURVE('',#287352,#287344,#287354,.T.); +#287352 = VERTEX_POINT('',#287353); +#287353 = CARTESIAN_POINT('',(151.748079,-151.094509,1.51)); +#287354 = LINE('',#287355,#287356); +#287355 = CARTESIAN_POINT('',(151.748079,-151.094509,1.51)); +#287356 = VECTOR('',#287357,1.); +#287357 = DIRECTION('',(0.,0.,1.)); +#287358 = ORIENTED_EDGE('',*,*,#287359,.F.); +#287359 = EDGE_CURVE('',#287320,#287352,#287360,.T.); +#287360 = LINE('',#287361,#287362); +#287361 = CARTESIAN_POINT('',(151.748079,-145.505491,1.51)); +#287362 = VECTOR('',#287363,1.); +#287363 = DIRECTION('',(0.,-1.,0.)); +#287364 = PLANE('',#287365); +#287365 = AXIS2_PLACEMENT_3D('',#287366,#287367,#287368); +#287366 = CARTESIAN_POINT('',(151.748079,-145.505491,1.51)); +#287367 = DIRECTION('',(1.,0.,-0.)); +#287368 = DIRECTION('',(0.,-1.,0.)); +#287369 = ADVANCED_FACE('',(#287370),#287395,.T.); +#287370 = FACE_BOUND('',#287371,.T.); +#287371 = EDGE_LOOP('',(#287372,#287373,#287381,#287389)); +#287372 = ORIENTED_EDGE('',*,*,#287351,.T.); +#287373 = ORIENTED_EDGE('',*,*,#287374,.T.); +#287374 = EDGE_CURVE('',#287344,#287375,#287377,.T.); +#287375 = VERTEX_POINT('',#287376); +#287376 = CARTESIAN_POINT('',(151.733148,-151.130557,1.545)); +#287377 = LINE('',#287378,#287379); +#287378 = CARTESIAN_POINT('',(151.748079,-151.094509,1.545)); +#287379 = VECTOR('',#287380,1.); +#287380 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#287381 = ORIENTED_EDGE('',*,*,#287382,.F.); +#287382 = EDGE_CURVE('',#287383,#287375,#287385,.T.); +#287383 = VERTEX_POINT('',#287384); +#287384 = CARTESIAN_POINT('',(151.733148,-151.130557,1.51)); +#287385 = LINE('',#287386,#287387); +#287386 = CARTESIAN_POINT('',(151.733148,-151.130557,1.51)); +#287387 = VECTOR('',#287388,1.); +#287388 = DIRECTION('',(0.,0.,1.)); +#287389 = ORIENTED_EDGE('',*,*,#287390,.F.); +#287390 = EDGE_CURVE('',#287352,#287383,#287391,.T.); +#287391 = LINE('',#287392,#287393); +#287392 = CARTESIAN_POINT('',(151.748079,-151.094509,1.51)); +#287393 = VECTOR('',#287394,1.); +#287394 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#287395 = PLANE('',#287396); +#287396 = AXIS2_PLACEMENT_3D('',#287397,#287398,#287399); +#287397 = CARTESIAN_POINT('',(151.748079,-151.094509,1.51)); +#287398 = DIRECTION('',(0.92388470188,-0.382670952168,0.)); +#287399 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#287400 = ADVANCED_FACE('',(#287401),#287426,.T.); +#287401 = FACE_BOUND('',#287402,.T.); +#287402 = EDGE_LOOP('',(#287403,#287404,#287412,#287420)); +#287403 = ORIENTED_EDGE('',*,*,#287382,.T.); +#287404 = ORIENTED_EDGE('',*,*,#287405,.T.); +#287405 = EDGE_CURVE('',#287375,#287406,#287408,.T.); +#287406 = VERTEX_POINT('',#287407); +#287407 = CARTESIAN_POINT('',(150.6,-152.27,1.545)); +#287408 = LINE('',#287409,#287410); +#287409 = CARTESIAN_POINT('',(151.733148,-151.130557,1.545)); +#287410 = VECTOR('',#287411,1.); +#287411 = DIRECTION('',(-0.705145414199,-0.709062722779,0.)); +#287412 = ORIENTED_EDGE('',*,*,#287413,.F.); +#287413 = EDGE_CURVE('',#287414,#287406,#287416,.T.); +#287414 = VERTEX_POINT('',#287415); +#287415 = CARTESIAN_POINT('',(150.6,-152.27,1.51)); +#287416 = LINE('',#287417,#287418); +#287417 = CARTESIAN_POINT('',(150.6,-152.27,1.51)); +#287418 = VECTOR('',#287419,1.); +#287419 = DIRECTION('',(0.,0.,1.)); +#287420 = ORIENTED_EDGE('',*,*,#287421,.F.); +#287421 = EDGE_CURVE('',#287383,#287414,#287422,.T.); +#287422 = LINE('',#287423,#287424); +#287423 = CARTESIAN_POINT('',(151.733148,-151.130557,1.51)); +#287424 = VECTOR('',#287425,1.); +#287425 = DIRECTION('',(-0.705145414199,-0.709062722779,0.)); +#287426 = PLANE('',#287427); +#287427 = AXIS2_PLACEMENT_3D('',#287428,#287429,#287430); +#287428 = CARTESIAN_POINT('',(151.733148,-151.130557,1.51)); +#287429 = DIRECTION('',(0.709062722779,-0.705145414199,0.)); +#287430 = DIRECTION('',(-0.705145414199,-0.709062722779,0.)); +#287431 = ADVANCED_FACE('',(#287432),#287459,.T.); +#287432 = FACE_BOUND('',#287433,.T.); +#287433 = EDGE_LOOP('',(#287434,#287435,#287444,#287452)); +#287434 = ORIENTED_EDGE('',*,*,#287413,.T.); +#287435 = ORIENTED_EDGE('',*,*,#287436,.T.); +#287436 = EDGE_CURVE('',#287406,#287437,#287439,.T.); +#287437 = VERTEX_POINT('',#287438); +#287438 = CARTESIAN_POINT('',(150.401921,-152.289509,1.545)); +#287439 = CIRCLE('',#287440,0.100000200906); +#287440 = AXIS2_PLACEMENT_3D('',#287441,#287442,#287443); +#287441 = CARTESIAN_POINT('',(150.49999979909,-152.2700003006,1.545)); +#287442 = DIRECTION('',(0.,0.,-1.)); +#287443 = DIRECTION('',(0.999999999995,3.006746495112E-06,0.)); +#287444 = ORIENTED_EDGE('',*,*,#287445,.F.); +#287445 = EDGE_CURVE('',#287446,#287437,#287448,.T.); +#287446 = VERTEX_POINT('',#287447); +#287447 = CARTESIAN_POINT('',(150.401921,-152.289509,1.51)); +#287448 = LINE('',#287449,#287450); +#287449 = CARTESIAN_POINT('',(150.401921,-152.289509,1.51)); +#287450 = VECTOR('',#287451,1.); +#287451 = DIRECTION('',(0.,0.,1.)); +#287452 = ORIENTED_EDGE('',*,*,#287453,.F.); +#287453 = EDGE_CURVE('',#287414,#287446,#287454,.T.); +#287454 = CIRCLE('',#287455,0.100000200906); +#287455 = AXIS2_PLACEMENT_3D('',#287456,#287457,#287458); +#287456 = CARTESIAN_POINT('',(150.49999979909,-152.2700003006,1.51)); +#287457 = DIRECTION('',(0.,0.,-1.)); +#287458 = DIRECTION('',(0.999999999995,3.006746495112E-06,0.)); +#287459 = CYLINDRICAL_SURFACE('',#287460,0.100000200906); +#287460 = AXIS2_PLACEMENT_3D('',#287461,#287462,#287463); +#287461 = CARTESIAN_POINT('',(150.49999979909,-152.2700003006,1.51)); +#287462 = DIRECTION('',(0.,0.,-1.)); +#287463 = DIRECTION('',(0.999999999995,3.006746495112E-06,0.)); +#287464 = ADVANCED_FACE('',(#287465),#287490,.T.); +#287465 = FACE_BOUND('',#287466,.T.); +#287466 = EDGE_LOOP('',(#287467,#287468,#287476,#287484)); +#287467 = ORIENTED_EDGE('',*,*,#287445,.T.); +#287468 = ORIENTED_EDGE('',*,*,#287469,.T.); +#287469 = EDGE_CURVE('',#287437,#287470,#287472,.T.); +#287470 = VERTEX_POINT('',#287471); +#287471 = CARTESIAN_POINT('',(150.4,-151.541421,1.545)); +#287472 = LINE('',#287473,#287474); +#287473 = CARTESIAN_POINT('',(150.401921,-152.289509,1.545)); +#287474 = VECTOR('',#287475,1.); +#287475 = DIRECTION('',(-2.567871248396E-03,0.999996703013,0.)); +#287476 = ORIENTED_EDGE('',*,*,#287477,.F.); +#287477 = EDGE_CURVE('',#287478,#287470,#287480,.T.); +#287478 = VERTEX_POINT('',#287479); +#287479 = CARTESIAN_POINT('',(150.4,-151.541421,1.51)); +#287480 = LINE('',#287481,#287482); +#287481 = CARTESIAN_POINT('',(150.4,-151.541421,1.51)); +#287482 = VECTOR('',#287483,1.); +#287483 = DIRECTION('',(0.,0.,1.)); +#287484 = ORIENTED_EDGE('',*,*,#287485,.F.); +#287485 = EDGE_CURVE('',#287446,#287478,#287486,.T.); +#287486 = LINE('',#287487,#287488); +#287487 = CARTESIAN_POINT('',(150.401921,-152.289509,1.51)); +#287488 = VECTOR('',#287489,1.); +#287489 = DIRECTION('',(-2.567871248396E-03,0.999996703013,0.)); +#287490 = PLANE('',#287491); +#287491 = AXIS2_PLACEMENT_3D('',#287492,#287493,#287494); +#287492 = CARTESIAN_POINT('',(150.401921,-152.289509,1.51)); +#287493 = DIRECTION('',(-0.999996703013,-2.567871248396E-03,0.)); +#287494 = DIRECTION('',(-2.567871248396E-03,0.999996703013,0.)); +#287495 = ADVANCED_FACE('',(#287496),#287521,.T.); +#287496 = FACE_BOUND('',#287497,.T.); +#287497 = EDGE_LOOP('',(#287498,#287499,#287507,#287515)); +#287498 = ORIENTED_EDGE('',*,*,#287477,.T.); +#287499 = ORIENTED_EDGE('',*,*,#287500,.T.); +#287500 = EDGE_CURVE('',#287470,#287501,#287503,.T.); +#287501 = VERTEX_POINT('',#287502); +#287502 = CARTESIAN_POINT('',(149.928078,-151.0695,1.545)); +#287503 = LINE('',#287504,#287505); +#287504 = CARTESIAN_POINT('',(150.4,-151.541421,1.545)); +#287505 = VECTOR('',#287506,1.); +#287506 = DIRECTION('',(-0.707107530365,0.707106032008,0.)); +#287507 = ORIENTED_EDGE('',*,*,#287508,.F.); +#287508 = EDGE_CURVE('',#287509,#287501,#287511,.T.); +#287509 = VERTEX_POINT('',#287510); +#287510 = CARTESIAN_POINT('',(149.928078,-151.0695,1.51)); +#287511 = LINE('',#287512,#287513); +#287512 = CARTESIAN_POINT('',(149.928078,-151.0695,1.51)); +#287513 = VECTOR('',#287514,1.); +#287514 = DIRECTION('',(0.,0.,1.)); +#287515 = ORIENTED_EDGE('',*,*,#287516,.F.); +#287516 = EDGE_CURVE('',#287478,#287509,#287517,.T.); +#287517 = LINE('',#287518,#287519); +#287518 = CARTESIAN_POINT('',(150.4,-151.541421,1.51)); +#287519 = VECTOR('',#287520,1.); +#287520 = DIRECTION('',(-0.707107530365,0.707106032008,0.)); +#287521 = PLANE('',#287522); +#287522 = AXIS2_PLACEMENT_3D('',#287523,#287524,#287525); +#287523 = CARTESIAN_POINT('',(150.4,-151.541421,1.51)); +#287524 = DIRECTION('',(-0.707106032008,-0.707107530365,0.)); +#287525 = DIRECTION('',(-0.707107530365,0.707106032008,0.)); +#287526 = ADVANCED_FACE('',(#287527),#287552,.T.); +#287527 = FACE_BOUND('',#287528,.T.); +#287528 = EDGE_LOOP('',(#287529,#287530,#287538,#287546)); +#287529 = ORIENTED_EDGE('',*,*,#287508,.T.); +#287530 = ORIENTED_EDGE('',*,*,#287531,.T.); +#287531 = EDGE_CURVE('',#287501,#287532,#287534,.T.); +#287532 = VERTEX_POINT('',#287533); +#287533 = CARTESIAN_POINT('',(149.914805,-151.077164,1.545)); +#287534 = LINE('',#287535,#287536); +#287535 = CARTESIAN_POINT('',(149.928078,-151.0695,1.545)); +#287536 = VECTOR('',#287537,1.); +#287537 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#287538 = ORIENTED_EDGE('',*,*,#287539,.F.); +#287539 = EDGE_CURVE('',#287540,#287532,#287542,.T.); +#287540 = VERTEX_POINT('',#287541); +#287541 = CARTESIAN_POINT('',(149.914805,-151.077164,1.51)); +#287542 = LINE('',#287543,#287544); +#287543 = CARTESIAN_POINT('',(149.914805,-151.077164,1.51)); +#287544 = VECTOR('',#287545,1.); +#287545 = DIRECTION('',(0.,0.,1.)); +#287546 = ORIENTED_EDGE('',*,*,#287547,.F.); +#287547 = EDGE_CURVE('',#287509,#287540,#287548,.T.); +#287548 = LINE('',#287549,#287550); +#287549 = CARTESIAN_POINT('',(149.928078,-151.0695,1.51)); +#287550 = VECTOR('',#287551,1.); +#287551 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#287552 = PLANE('',#287553); +#287553 = AXIS2_PLACEMENT_3D('',#287554,#287555,#287556); +#287554 = CARTESIAN_POINT('',(149.928078,-151.0695,1.51)); +#287555 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#287556 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#287557 = ADVANCED_FACE('',(#287558),#287585,.T.); +#287558 = FACE_BOUND('',#287559,.T.); +#287559 = EDGE_LOOP('',(#287560,#287561,#287570,#287578)); +#287560 = ORIENTED_EDGE('',*,*,#287539,.T.); +#287561 = ORIENTED_EDGE('',*,*,#287562,.T.); +#287562 = EDGE_CURVE('',#287532,#287563,#287565,.T.); +#287563 = VERTEX_POINT('',#287564); +#287564 = CARTESIAN_POINT('',(150.077164,-150.914805,1.545)); +#287565 = CIRCLE('',#287566,0.299999934501); +#287566 = AXIS2_PLACEMENT_3D('',#287567,#287568,#287569); +#287567 = CARTESIAN_POINT('',(149.80000014059,-150.8000001405,1.545)); +#287568 = DIRECTION('',(0.,0.,-1.)); +#287569 = DIRECTION('',(0.382682948224,-0.923879733049,0.)); +#287570 = ORIENTED_EDGE('',*,*,#287571,.F.); +#287571 = EDGE_CURVE('',#287572,#287563,#287574,.T.); +#287572 = VERTEX_POINT('',#287573); +#287573 = CARTESIAN_POINT('',(150.077164,-150.914805,1.51)); +#287574 = LINE('',#287575,#287576); +#287575 = CARTESIAN_POINT('',(150.077164,-150.914805,1.51)); +#287576 = VECTOR('',#287577,1.); +#287577 = DIRECTION('',(0.,0.,1.)); +#287578 = ORIENTED_EDGE('',*,*,#287579,.F.); +#287579 = EDGE_CURVE('',#287540,#287572,#287580,.T.); +#287580 = CIRCLE('',#287581,0.299999934501); +#287581 = AXIS2_PLACEMENT_3D('',#287582,#287583,#287584); +#287582 = CARTESIAN_POINT('',(149.80000014059,-150.8000001405,1.51)); +#287583 = DIRECTION('',(0.,0.,-1.)); +#287584 = DIRECTION('',(0.382682948224,-0.923879733049,0.)); +#287585 = CYLINDRICAL_SURFACE('',#287586,0.299999934501); +#287586 = AXIS2_PLACEMENT_3D('',#287587,#287588,#287589); +#287587 = CARTESIAN_POINT('',(149.80000014059,-150.8000001405,1.51)); +#287588 = DIRECTION('',(0.,0.,-1.)); +#287589 = DIRECTION('',(0.382682948224,-0.923879733049,0.)); +#287590 = ADVANCED_FACE('',(#287591),#287616,.T.); +#287591 = FACE_BOUND('',#287592,.T.); +#287592 = EDGE_LOOP('',(#287593,#287594,#287602,#287610)); +#287593 = ORIENTED_EDGE('',*,*,#287571,.T.); +#287594 = ORIENTED_EDGE('',*,*,#287595,.T.); +#287595 = EDGE_CURVE('',#287563,#287596,#287598,.T.); +#287596 = VERTEX_POINT('',#287597); +#287597 = CARTESIAN_POINT('',(150.0695,-150.928078,1.545)); +#287598 = LINE('',#287599,#287600); +#287599 = CARTESIAN_POINT('',(150.077164,-150.914805,1.545)); +#287600 = VECTOR('',#287601,1.); +#287601 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#287602 = ORIENTED_EDGE('',*,*,#287603,.F.); +#287603 = EDGE_CURVE('',#287604,#287596,#287606,.T.); +#287604 = VERTEX_POINT('',#287605); +#287605 = CARTESIAN_POINT('',(150.0695,-150.928078,1.51)); +#287606 = LINE('',#287607,#287608); +#287607 = CARTESIAN_POINT('',(150.0695,-150.928078,1.51)); +#287608 = VECTOR('',#287609,1.); +#287609 = DIRECTION('',(0.,0.,1.)); +#287610 = ORIENTED_EDGE('',*,*,#287611,.F.); +#287611 = EDGE_CURVE('',#287572,#287604,#287612,.T.); +#287612 = LINE('',#287613,#287614); +#287613 = CARTESIAN_POINT('',(150.077164,-150.914805,1.51)); +#287614 = VECTOR('',#287615,1.); +#287615 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#287616 = PLANE('',#287617); +#287617 = AXIS2_PLACEMENT_3D('',#287618,#287619,#287620); +#287618 = CARTESIAN_POINT('',(150.077164,-150.914805,1.51)); +#287619 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#287620 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#287621 = ADVANCED_FACE('',(#287622),#287647,.T.); +#287622 = FACE_BOUND('',#287623,.T.); +#287623 = EDGE_LOOP('',(#287624,#287625,#287633,#287641)); +#287624 = ORIENTED_EDGE('',*,*,#287603,.T.); +#287625 = ORIENTED_EDGE('',*,*,#287626,.T.); +#287626 = EDGE_CURVE('',#287596,#287627,#287629,.T.); +#287627 = VERTEX_POINT('',#287628); +#287628 = CARTESIAN_POINT('',(150.583147,-151.444443,1.545)); +#287629 = LINE('',#287630,#287631); +#287630 = CARTESIAN_POINT('',(150.0695,-150.928078,1.545)); +#287631 = VECTOR('',#287632,1.); +#287632 = DIRECTION('',(0.705238409452,-0.708970229159,0.)); +#287633 = ORIENTED_EDGE('',*,*,#287634,.F.); +#287634 = EDGE_CURVE('',#287635,#287627,#287637,.T.); +#287635 = VERTEX_POINT('',#287636); +#287636 = CARTESIAN_POINT('',(150.583147,-151.444443,1.51)); +#287637 = LINE('',#287638,#287639); +#287638 = CARTESIAN_POINT('',(150.583147,-151.444443,1.51)); +#287639 = VECTOR('',#287640,1.); +#287640 = DIRECTION('',(0.,0.,1.)); +#287641 = ORIENTED_EDGE('',*,*,#287642,.F.); +#287642 = EDGE_CURVE('',#287604,#287635,#287643,.T.); +#287643 = LINE('',#287644,#287645); +#287644 = CARTESIAN_POINT('',(150.0695,-150.928078,1.51)); +#287645 = VECTOR('',#287646,1.); +#287646 = DIRECTION('',(0.705238409452,-0.708970229159,0.)); +#287647 = PLANE('',#287648); +#287648 = AXIS2_PLACEMENT_3D('',#287649,#287650,#287651); +#287649 = CARTESIAN_POINT('',(150.0695,-150.928078,1.51)); +#287650 = DIRECTION('',(0.708970229159,0.705238409452,-0.)); +#287651 = DIRECTION('',(0.705238409452,-0.708970229159,0.)); +#287652 = ADVANCED_FACE('',(#287653),#287678,.T.); +#287653 = FACE_BOUND('',#287654,.T.); +#287654 = EDGE_LOOP('',(#287655,#287656,#287664,#287672)); +#287655 = ORIENTED_EDGE('',*,*,#287634,.T.); +#287656 = ORIENTED_EDGE('',*,*,#287657,.T.); +#287657 = EDGE_CURVE('',#287627,#287658,#287660,.T.); +#287658 = VERTEX_POINT('',#287659); +#287659 = CARTESIAN_POINT('',(150.598079,-151.480491,1.545)); +#287660 = LINE('',#287661,#287662); +#287661 = CARTESIAN_POINT('',(150.583147,-151.444443,1.545)); +#287662 = VECTOR('',#287663,1.); +#287663 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#287664 = ORIENTED_EDGE('',*,*,#287665,.F.); +#287665 = EDGE_CURVE('',#287666,#287658,#287668,.T.); +#287666 = VERTEX_POINT('',#287667); +#287667 = CARTESIAN_POINT('',(150.598079,-151.480491,1.51)); +#287668 = LINE('',#287669,#287670); +#287669 = CARTESIAN_POINT('',(150.598079,-151.480491,1.51)); +#287670 = VECTOR('',#287671,1.); +#287671 = DIRECTION('',(0.,0.,1.)); +#287672 = ORIENTED_EDGE('',*,*,#287673,.F.); +#287673 = EDGE_CURVE('',#287635,#287666,#287674,.T.); +#287674 = LINE('',#287675,#287676); +#287675 = CARTESIAN_POINT('',(150.583147,-151.444443,1.51)); +#287676 = VECTOR('',#287677,1.); +#287677 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#287678 = PLANE('',#287679); +#287679 = AXIS2_PLACEMENT_3D('',#287680,#287681,#287682); +#287680 = CARTESIAN_POINT('',(150.583147,-151.444443,1.51)); +#287681 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#287682 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#287683 = ADVANCED_FACE('',(#287684),#287709,.T.); +#287684 = FACE_BOUND('',#287685,.T.); +#287685 = EDGE_LOOP('',(#287686,#287687,#287695,#287703)); +#287686 = ORIENTED_EDGE('',*,*,#287665,.T.); +#287687 = ORIENTED_EDGE('',*,*,#287688,.T.); +#287688 = EDGE_CURVE('',#287658,#287689,#287691,.T.); +#287689 = VERTEX_POINT('',#287690); +#287690 = CARTESIAN_POINT('',(150.6,-151.983578,1.545)); +#287691 = LINE('',#287692,#287693); +#287692 = CARTESIAN_POINT('',(150.598079,-151.480491,1.545)); +#287693 = VECTOR('',#287694,1.); +#287694 = DIRECTION('',(3.818397207023E-03,-0.999992709895,0.)); +#287695 = ORIENTED_EDGE('',*,*,#287696,.F.); +#287696 = EDGE_CURVE('',#287697,#287689,#287699,.T.); +#287697 = VERTEX_POINT('',#287698); +#287698 = CARTESIAN_POINT('',(150.6,-151.983578,1.51)); +#287699 = LINE('',#287700,#287701); +#287700 = CARTESIAN_POINT('',(150.6,-151.983578,1.51)); +#287701 = VECTOR('',#287702,1.); +#287702 = DIRECTION('',(0.,0.,1.)); +#287703 = ORIENTED_EDGE('',*,*,#287704,.F.); +#287704 = EDGE_CURVE('',#287666,#287697,#287705,.T.); +#287705 = LINE('',#287706,#287707); +#287706 = CARTESIAN_POINT('',(150.598079,-151.480491,1.51)); +#287707 = VECTOR('',#287708,1.); +#287708 = DIRECTION('',(3.818397207023E-03,-0.999992709895,0.)); +#287709 = PLANE('',#287710); +#287710 = AXIS2_PLACEMENT_3D('',#287711,#287712,#287713); +#287711 = CARTESIAN_POINT('',(150.598079,-151.480491,1.51)); +#287712 = DIRECTION('',(0.999992709895,3.818397207023E-03,-0.)); +#287713 = DIRECTION('',(3.818397207023E-03,-0.999992709895,0.)); +#287714 = ADVANCED_FACE('',(#287715),#287740,.T.); +#287715 = FACE_BOUND('',#287716,.T.); +#287716 = EDGE_LOOP('',(#287717,#287718,#287726,#287734)); +#287717 = ORIENTED_EDGE('',*,*,#287696,.T.); +#287718 = ORIENTED_EDGE('',*,*,#287719,.T.); +#287719 = EDGE_CURVE('',#287689,#287720,#287722,.T.); +#287720 = VERTEX_POINT('',#287721); +#287721 = CARTESIAN_POINT('',(151.55,-151.033578,1.545)); +#287722 = LINE('',#287723,#287724); +#287723 = CARTESIAN_POINT('',(150.6,-151.983578,1.545)); +#287724 = VECTOR('',#287725,1.); +#287725 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287726 = ORIENTED_EDGE('',*,*,#287727,.F.); +#287727 = EDGE_CURVE('',#287728,#287720,#287730,.T.); +#287728 = VERTEX_POINT('',#287729); +#287729 = CARTESIAN_POINT('',(151.55,-151.033578,1.51)); +#287730 = LINE('',#287731,#287732); +#287731 = CARTESIAN_POINT('',(151.55,-151.033578,1.51)); +#287732 = VECTOR('',#287733,1.); +#287733 = DIRECTION('',(0.,0.,1.)); +#287734 = ORIENTED_EDGE('',*,*,#287735,.F.); +#287735 = EDGE_CURVE('',#287697,#287728,#287736,.T.); +#287736 = LINE('',#287737,#287738); +#287737 = CARTESIAN_POINT('',(150.6,-151.983578,1.51)); +#287738 = VECTOR('',#287739,1.); +#287739 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287740 = PLANE('',#287741); +#287741 = AXIS2_PLACEMENT_3D('',#287742,#287743,#287744); +#287742 = CARTESIAN_POINT('',(150.6,-151.983578,1.51)); +#287743 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#287744 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287745 = ADVANCED_FACE('',(#287746),#287771,.T.); +#287746 = FACE_BOUND('',#287747,.T.); +#287747 = EDGE_LOOP('',(#287748,#287749,#287757,#287765)); +#287748 = ORIENTED_EDGE('',*,*,#287727,.T.); +#287749 = ORIENTED_EDGE('',*,*,#287750,.T.); +#287750 = EDGE_CURVE('',#287720,#287751,#287753,.T.); +#287751 = VERTEX_POINT('',#287752); +#287752 = CARTESIAN_POINT('',(151.551921,-145.505491,1.545)); +#287753 = LINE('',#287754,#287755); +#287754 = CARTESIAN_POINT('',(151.55,-151.033578,1.545)); +#287755 = VECTOR('',#287756,1.); +#287756 = DIRECTION('',(3.474981280136E-04,0.999999939623,0.)); +#287757 = ORIENTED_EDGE('',*,*,#287758,.F.); +#287758 = EDGE_CURVE('',#287759,#287751,#287761,.T.); +#287759 = VERTEX_POINT('',#287760); +#287760 = CARTESIAN_POINT('',(151.551921,-145.505491,1.51)); +#287761 = LINE('',#287762,#287763); +#287762 = CARTESIAN_POINT('',(151.551921,-145.505491,1.51)); +#287763 = VECTOR('',#287764,1.); +#287764 = DIRECTION('',(0.,0.,1.)); +#287765 = ORIENTED_EDGE('',*,*,#287766,.F.); +#287766 = EDGE_CURVE('',#287728,#287759,#287767,.T.); +#287767 = LINE('',#287768,#287769); +#287768 = CARTESIAN_POINT('',(151.55,-151.033578,1.51)); +#287769 = VECTOR('',#287770,1.); +#287770 = DIRECTION('',(3.474981280136E-04,0.999999939623,0.)); +#287771 = PLANE('',#287772); +#287772 = AXIS2_PLACEMENT_3D('',#287773,#287774,#287775); +#287773 = CARTESIAN_POINT('',(151.55,-151.033578,1.51)); +#287774 = DIRECTION('',(-0.999999939623,3.474981280136E-04,0.)); +#287775 = DIRECTION('',(3.474981280136E-04,0.999999939623,0.)); +#287776 = ADVANCED_FACE('',(#287777),#287802,.T.); +#287777 = FACE_BOUND('',#287778,.T.); +#287778 = EDGE_LOOP('',(#287779,#287780,#287788,#287796)); +#287779 = ORIENTED_EDGE('',*,*,#287758,.T.); +#287780 = ORIENTED_EDGE('',*,*,#287781,.T.); +#287781 = EDGE_CURVE('',#287751,#287782,#287784,.T.); +#287782 = VERTEX_POINT('',#287783); +#287783 = CARTESIAN_POINT('',(151.566853,-145.469443,1.545)); +#287784 = LINE('',#287785,#287786); +#287785 = CARTESIAN_POINT('',(151.551921,-145.505491,1.545)); +#287786 = VECTOR('',#287787,1.); +#287787 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#287788 = ORIENTED_EDGE('',*,*,#287789,.F.); +#287789 = EDGE_CURVE('',#287790,#287782,#287792,.T.); +#287790 = VERTEX_POINT('',#287791); +#287791 = CARTESIAN_POINT('',(151.566853,-145.469443,1.51)); +#287792 = LINE('',#287793,#287794); +#287793 = CARTESIAN_POINT('',(151.566853,-145.469443,1.51)); +#287794 = VECTOR('',#287795,1.); +#287795 = DIRECTION('',(0.,0.,1.)); +#287796 = ORIENTED_EDGE('',*,*,#287797,.F.); +#287797 = EDGE_CURVE('',#287759,#287790,#287798,.T.); +#287798 = LINE('',#287799,#287800); +#287799 = CARTESIAN_POINT('',(151.551921,-145.505491,1.51)); +#287800 = VECTOR('',#287801,1.); +#287801 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#287802 = PLANE('',#287803); +#287803 = AXIS2_PLACEMENT_3D('',#287804,#287805,#287806); +#287804 = CARTESIAN_POINT('',(151.551921,-145.505491,1.51)); +#287805 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#287806 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#287807 = ADVANCED_FACE('',(#287808),#287824,.T.); +#287808 = FACE_BOUND('',#287809,.T.); +#287809 = EDGE_LOOP('',(#287810,#287811,#287817,#287818)); +#287810 = ORIENTED_EDGE('',*,*,#287789,.T.); +#287811 = ORIENTED_EDGE('',*,*,#287812,.T.); +#287812 = EDGE_CURVE('',#287782,#287303,#287813,.T.); +#287813 = LINE('',#287814,#287815); +#287814 = CARTESIAN_POINT('',(151.566853,-145.469443,1.545)); +#287815 = VECTOR('',#287816,1.); +#287816 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287817 = ORIENTED_EDGE('',*,*,#287300,.F.); +#287818 = ORIENTED_EDGE('',*,*,#287819,.F.); +#287819 = EDGE_CURVE('',#287790,#287301,#287820,.T.); +#287820 = LINE('',#287821,#287822); +#287821 = CARTESIAN_POINT('',(151.566853,-145.469443,1.51)); +#287822 = VECTOR('',#287823,1.); +#287823 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287824 = PLANE('',#287825); +#287825 = AXIS2_PLACEMENT_3D('',#287826,#287827,#287828); +#287826 = CARTESIAN_POINT('',(151.566853,-145.469443,1.51)); +#287827 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#287828 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#287829 = ADVANCED_FACE('',(#287830),#287857,.F.); +#287830 = FACE_BOUND('',#287831,.T.); +#287831 = EDGE_LOOP('',(#287832,#287842,#287849,#287850)); +#287832 = ORIENTED_EDGE('',*,*,#287833,.T.); +#287833 = EDGE_CURVE('',#287834,#287836,#287838,.T.); +#287834 = VERTEX_POINT('',#287835); +#287835 = CARTESIAN_POINT('',(149.937255,-150.8,1.51)); +#287836 = VERTEX_POINT('',#287837); +#287837 = CARTESIAN_POINT('',(149.937255,-150.8,1.545)); +#287838 = LINE('',#287839,#287840); +#287839 = CARTESIAN_POINT('',(149.937255,-150.8,1.51)); +#287840 = VECTOR('',#287841,1.); +#287841 = DIRECTION('',(0.,0.,1.)); +#287842 = ORIENTED_EDGE('',*,*,#287843,.T.); +#287843 = EDGE_CURVE('',#287836,#287836,#287844,.T.); +#287844 = CIRCLE('',#287845,0.137255); +#287845 = AXIS2_PLACEMENT_3D('',#287846,#287847,#287848); +#287846 = CARTESIAN_POINT('',(149.8,-150.8,1.545)); +#287847 = DIRECTION('',(0.,0.,1.)); +#287848 = DIRECTION('',(1.,0.,-0.)); +#287849 = ORIENTED_EDGE('',*,*,#287833,.F.); +#287850 = ORIENTED_EDGE('',*,*,#287851,.F.); +#287851 = EDGE_CURVE('',#287834,#287834,#287852,.T.); +#287852 = CIRCLE('',#287853,0.137255); +#287853 = AXIS2_PLACEMENT_3D('',#287854,#287855,#287856); +#287854 = CARTESIAN_POINT('',(149.8,-150.8,1.51)); +#287855 = DIRECTION('',(0.,0.,1.)); +#287856 = DIRECTION('',(1.,0.,-0.)); +#287857 = CYLINDRICAL_SURFACE('',#287858,0.137255); +#287858 = AXIS2_PLACEMENT_3D('',#287859,#287860,#287861); +#287859 = CARTESIAN_POINT('',(149.8,-150.8,1.51)); +#287860 = DIRECTION('',(-0.,-0.,-1.)); +#287861 = DIRECTION('',(1.,0.,-0.)); +#287862 = ADVANCED_FACE('',(#287863,#287882),#287885,.F.); +#287863 = FACE_BOUND('',#287864,.T.); +#287864 = EDGE_LOOP('',(#287865,#287866,#287867,#287868,#287869,#287870, + #287871,#287872,#287873,#287874,#287875,#287876,#287877,#287878, + #287879,#287880,#287881)); +#287865 = ORIENTED_EDGE('',*,*,#287327,.T.); +#287866 = ORIENTED_EDGE('',*,*,#287359,.T.); +#287867 = ORIENTED_EDGE('',*,*,#287390,.T.); +#287868 = ORIENTED_EDGE('',*,*,#287421,.T.); +#287869 = ORIENTED_EDGE('',*,*,#287453,.T.); +#287870 = ORIENTED_EDGE('',*,*,#287485,.T.); +#287871 = ORIENTED_EDGE('',*,*,#287516,.T.); +#287872 = ORIENTED_EDGE('',*,*,#287547,.T.); +#287873 = ORIENTED_EDGE('',*,*,#287579,.T.); +#287874 = ORIENTED_EDGE('',*,*,#287611,.T.); +#287875 = ORIENTED_EDGE('',*,*,#287642,.T.); +#287876 = ORIENTED_EDGE('',*,*,#287673,.T.); +#287877 = ORIENTED_EDGE('',*,*,#287704,.T.); +#287878 = ORIENTED_EDGE('',*,*,#287735,.T.); +#287879 = ORIENTED_EDGE('',*,*,#287766,.T.); +#287880 = ORIENTED_EDGE('',*,*,#287797,.T.); +#287881 = ORIENTED_EDGE('',*,*,#287819,.T.); +#287882 = FACE_BOUND('',#287883,.T.); +#287883 = EDGE_LOOP('',(#287884)); +#287884 = ORIENTED_EDGE('',*,*,#287851,.T.); +#287885 = PLANE('',#287886); +#287886 = AXIS2_PLACEMENT_3D('',#287887,#287888,#287889); +#287887 = CARTESIAN_POINT('',(0.,0.,1.51)); +#287888 = DIRECTION('',(0.,0.,1.)); +#287889 = DIRECTION('',(1.,0.,-0.)); +#287890 = ADVANCED_FACE('',(#287891,#287910),#287913,.T.); +#287891 = FACE_BOUND('',#287892,.F.); +#287892 = EDGE_LOOP('',(#287893,#287894,#287895,#287896,#287897,#287898, + #287899,#287900,#287901,#287902,#287903,#287904,#287905,#287906, + #287907,#287908,#287909)); +#287893 = ORIENTED_EDGE('',*,*,#287310,.T.); +#287894 = ORIENTED_EDGE('',*,*,#287343,.T.); +#287895 = ORIENTED_EDGE('',*,*,#287374,.T.); +#287896 = ORIENTED_EDGE('',*,*,#287405,.T.); +#287897 = ORIENTED_EDGE('',*,*,#287436,.T.); +#287898 = ORIENTED_EDGE('',*,*,#287469,.T.); +#287899 = ORIENTED_EDGE('',*,*,#287500,.T.); +#287900 = ORIENTED_EDGE('',*,*,#287531,.T.); +#287901 = ORIENTED_EDGE('',*,*,#287562,.T.); +#287902 = ORIENTED_EDGE('',*,*,#287595,.T.); +#287903 = ORIENTED_EDGE('',*,*,#287626,.T.); +#287904 = ORIENTED_EDGE('',*,*,#287657,.T.); +#287905 = ORIENTED_EDGE('',*,*,#287688,.T.); +#287906 = ORIENTED_EDGE('',*,*,#287719,.T.); +#287907 = ORIENTED_EDGE('',*,*,#287750,.T.); +#287908 = ORIENTED_EDGE('',*,*,#287781,.T.); +#287909 = ORIENTED_EDGE('',*,*,#287812,.T.); +#287910 = FACE_BOUND('',#287911,.F.); +#287911 = EDGE_LOOP('',(#287912)); +#287912 = ORIENTED_EDGE('',*,*,#287843,.T.); +#287913 = PLANE('',#287914); +#287914 = AXIS2_PLACEMENT_3D('',#287915,#287916,#287917); +#287915 = CARTESIAN_POINT('',(0.,0.,1.545)); +#287916 = DIRECTION('',(0.,0.,1.)); +#287917 = DIRECTION('',(1.,0.,-0.)); +#287918 = MANIFOLD_SOLID_BREP('',#287919); +#287919 = CLOSED_SHELL('',(#287920,#287960,#287991,#288022,#288053, + #288086,#288117,#288148,#288179,#288210,#288241,#288272,#288303, + #288334,#288367,#288398,#288429,#288460,#288491,#288524,#288555, + #288586,#288617,#288648,#288681,#288712,#288743,#288774,#288805, + #288836,#288867,#288898,#288929,#288960,#288991,#289022,#289053, + #289084,#289115,#289146,#289177,#289208,#289239,#289270,#289303, + #289334,#289365,#289396,#289418,#289451,#289510)); +#287920 = ADVANCED_FACE('',(#287921),#287955,.T.); +#287921 = FACE_BOUND('',#287922,.T.); +#287922 = EDGE_LOOP('',(#287923,#287933,#287941,#287949)); +#287923 = ORIENTED_EDGE('',*,*,#287924,.T.); +#287924 = EDGE_CURVE('',#287925,#287927,#287929,.T.); +#287925 = VERTEX_POINT('',#287926); +#287926 = CARTESIAN_POINT('',(124.,-127.947473,1.51)); +#287927 = VERTEX_POINT('',#287928); +#287928 = CARTESIAN_POINT('',(124.,-127.947473,1.545)); +#287929 = LINE('',#287930,#287931); +#287930 = CARTESIAN_POINT('',(124.,-127.947473,1.51)); +#287931 = VECTOR('',#287932,1.); +#287932 = DIRECTION('',(0.,0.,1.)); +#287933 = ORIENTED_EDGE('',*,*,#287934,.T.); +#287934 = EDGE_CURVE('',#287927,#287935,#287937,.T.); +#287935 = VERTEX_POINT('',#287936); +#287936 = CARTESIAN_POINT('',(124.057995,-127.943672,1.545)); +#287937 = LINE('',#287938,#287939); +#287938 = CARTESIAN_POINT('',(124.,-127.947473,1.545)); +#287939 = VECTOR('',#287940,1.); +#287940 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#287941 = ORIENTED_EDGE('',*,*,#287942,.F.); +#287942 = EDGE_CURVE('',#287943,#287935,#287945,.T.); +#287943 = VERTEX_POINT('',#287944); +#287944 = CARTESIAN_POINT('',(124.057995,-127.943672,1.51)); +#287945 = LINE('',#287946,#287947); +#287946 = CARTESIAN_POINT('',(124.057995,-127.943672,1.51)); +#287947 = VECTOR('',#287948,1.); +#287948 = DIRECTION('',(0.,0.,1.)); +#287949 = ORIENTED_EDGE('',*,*,#287950,.F.); +#287950 = EDGE_CURVE('',#287925,#287943,#287951,.T.); +#287951 = LINE('',#287952,#287953); +#287952 = CARTESIAN_POINT('',(124.,-127.947473,1.51)); +#287953 = VECTOR('',#287954,1.); +#287954 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#287955 = PLANE('',#287956); +#287956 = AXIS2_PLACEMENT_3D('',#287957,#287958,#287959); +#287957 = CARTESIAN_POINT('',(124.,-127.947473,1.51)); +#287958 = DIRECTION('',(-6.53998205277E-02,0.997859140097,0.)); +#287959 = DIRECTION('',(0.997859140097,6.53998205277E-02,0.)); +#287960 = ADVANCED_FACE('',(#287961),#287986,.T.); +#287961 = FACE_BOUND('',#287962,.T.); +#287962 = EDGE_LOOP('',(#287963,#287964,#287972,#287980)); +#287963 = ORIENTED_EDGE('',*,*,#287942,.T.); +#287964 = ORIENTED_EDGE('',*,*,#287965,.T.); +#287965 = EDGE_CURVE('',#287935,#287966,#287968,.T.); +#287966 = VERTEX_POINT('',#287967); +#287967 = CARTESIAN_POINT('',(124.09878,-127.932743,1.545)); +#287968 = LINE('',#287969,#287970); +#287969 = CARTESIAN_POINT('',(124.057995,-127.943672,1.545)); +#287970 = VECTOR('',#287971,1.); +#287971 = DIRECTION('',(0.965921727859,0.258834340168,0.)); +#287972 = ORIENTED_EDGE('',*,*,#287973,.F.); +#287973 = EDGE_CURVE('',#287974,#287966,#287976,.T.); +#287974 = VERTEX_POINT('',#287975); +#287975 = CARTESIAN_POINT('',(124.09878,-127.932743,1.51)); +#287976 = LINE('',#287977,#287978); +#287977 = CARTESIAN_POINT('',(124.09878,-127.932743,1.51)); +#287978 = VECTOR('',#287979,1.); +#287979 = DIRECTION('',(0.,0.,1.)); +#287980 = ORIENTED_EDGE('',*,*,#287981,.F.); +#287981 = EDGE_CURVE('',#287943,#287974,#287982,.T.); +#287982 = LINE('',#287983,#287984); +#287983 = CARTESIAN_POINT('',(124.057995,-127.943672,1.51)); +#287984 = VECTOR('',#287985,1.); +#287985 = DIRECTION('',(0.965921727859,0.258834340168,0.)); +#287986 = PLANE('',#287987); +#287987 = AXIS2_PLACEMENT_3D('',#287988,#287989,#287990); +#287988 = CARTESIAN_POINT('',(124.057995,-127.943672,1.51)); +#287989 = DIRECTION('',(-0.258834340168,0.965921727859,0.)); +#287990 = DIRECTION('',(0.965921727859,0.258834340168,0.)); +#287991 = ADVANCED_FACE('',(#287992),#288017,.T.); +#287992 = FACE_BOUND('',#287993,.T.); +#287993 = EDGE_LOOP('',(#287994,#287995,#288003,#288011)); +#287994 = ORIENTED_EDGE('',*,*,#287973,.T.); +#287995 = ORIENTED_EDGE('',*,*,#287996,.T.); +#287996 = EDGE_CURVE('',#287966,#287997,#287999,.T.); +#287997 = VERTEX_POINT('',#287998); +#287998 = CARTESIAN_POINT('',(124.1,-128.718869,1.545)); +#287999 = LINE('',#288000,#288001); +#288000 = CARTESIAN_POINT('',(124.09878,-127.932743,1.545)); +#288001 = VECTOR('',#288002,1.); +#288002 = DIRECTION('',(1.551912200901E-03,-0.999998795784,0.)); +#288003 = ORIENTED_EDGE('',*,*,#288004,.F.); +#288004 = EDGE_CURVE('',#288005,#287997,#288007,.T.); +#288005 = VERTEX_POINT('',#288006); +#288006 = CARTESIAN_POINT('',(124.1,-128.718869,1.51)); +#288007 = LINE('',#288008,#288009); +#288008 = CARTESIAN_POINT('',(124.1,-128.718869,1.51)); +#288009 = VECTOR('',#288010,1.); +#288010 = DIRECTION('',(0.,0.,1.)); +#288011 = ORIENTED_EDGE('',*,*,#288012,.F.); +#288012 = EDGE_CURVE('',#287974,#288005,#288013,.T.); +#288013 = LINE('',#288014,#288015); +#288014 = CARTESIAN_POINT('',(124.09878,-127.932743,1.51)); +#288015 = VECTOR('',#288016,1.); +#288016 = DIRECTION('',(1.551912200901E-03,-0.999998795784,0.)); +#288017 = PLANE('',#288018); +#288018 = AXIS2_PLACEMENT_3D('',#288019,#288020,#288021); +#288019 = CARTESIAN_POINT('',(124.09878,-127.932743,1.51)); +#288020 = DIRECTION('',(0.999998795784,1.551912200901E-03,-0.)); +#288021 = DIRECTION('',(1.551912200901E-03,-0.999998795784,0.)); +#288022 = ADVANCED_FACE('',(#288023),#288048,.T.); +#288023 = FACE_BOUND('',#288024,.T.); +#288024 = EDGE_LOOP('',(#288025,#288026,#288034,#288042)); +#288025 = ORIENTED_EDGE('',*,*,#288004,.T.); +#288026 = ORIENTED_EDGE('',*,*,#288027,.T.); +#288027 = EDGE_CURVE('',#287997,#288028,#288030,.T.); +#288028 = VERTEX_POINT('',#288029); +#288029 = CARTESIAN_POINT('',(124.114805,-128.722836,1.545)); +#288030 = LINE('',#288031,#288032); +#288031 = CARTESIAN_POINT('',(124.1,-128.718869,1.545)); +#288032 = VECTOR('',#288033,1.); +#288033 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#288034 = ORIENTED_EDGE('',*,*,#288035,.F.); +#288035 = EDGE_CURVE('',#288036,#288028,#288038,.T.); +#288036 = VERTEX_POINT('',#288037); +#288037 = CARTESIAN_POINT('',(124.114805,-128.722836,1.51)); +#288038 = LINE('',#288039,#288040); +#288039 = CARTESIAN_POINT('',(124.114805,-128.722836,1.51)); +#288040 = VECTOR('',#288041,1.); +#288041 = DIRECTION('',(0.,0.,1.)); +#288042 = ORIENTED_EDGE('',*,*,#288043,.F.); +#288043 = EDGE_CURVE('',#288005,#288036,#288044,.T.); +#288044 = LINE('',#288045,#288046); +#288045 = CARTESIAN_POINT('',(124.1,-128.718869,1.51)); +#288046 = VECTOR('',#288047,1.); +#288047 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#288048 = PLANE('',#288049); +#288049 = AXIS2_PLACEMENT_3D('',#288050,#288051,#288052); +#288050 = CARTESIAN_POINT('',(124.1,-128.718869,1.51)); +#288051 = DIRECTION('',(0.258819788118,0.965925627198,-0.)); +#288052 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#288053 = ADVANCED_FACE('',(#288054),#288081,.T.); +#288054 = FACE_BOUND('',#288055,.T.); +#288055 = EDGE_LOOP('',(#288056,#288057,#288066,#288074)); +#288056 = ORIENTED_EDGE('',*,*,#288035,.T.); +#288057 = ORIENTED_EDGE('',*,*,#288058,.T.); +#288058 = EDGE_CURVE('',#288028,#288059,#288061,.T.); +#288059 = VERTEX_POINT('',#288060); +#288060 = CARTESIAN_POINT('',(124.277164,-129.114805,1.545)); +#288061 = CIRCLE('',#288062,0.300000118202); +#288062 = AXIS2_PLACEMENT_3D('',#288063,#288064,#288065); +#288063 = CARTESIAN_POINT('',(124.,-129.,1.545)); +#288064 = DIRECTION('',(0.,0.,-1.)); +#288065 = DIRECTION('',(0.382683182554,0.923879635986,0.)); +#288066 = ORIENTED_EDGE('',*,*,#288067,.F.); +#288067 = EDGE_CURVE('',#288068,#288059,#288070,.T.); +#288068 = VERTEX_POINT('',#288069); +#288069 = CARTESIAN_POINT('',(124.277164,-129.114805,1.51)); +#288070 = LINE('',#288071,#288072); +#288071 = CARTESIAN_POINT('',(124.277164,-129.114805,1.51)); +#288072 = VECTOR('',#288073,1.); +#288073 = DIRECTION('',(0.,0.,1.)); +#288074 = ORIENTED_EDGE('',*,*,#288075,.F.); +#288075 = EDGE_CURVE('',#288036,#288068,#288076,.T.); +#288076 = CIRCLE('',#288077,0.300000118202); +#288077 = AXIS2_PLACEMENT_3D('',#288078,#288079,#288080); +#288078 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#288079 = DIRECTION('',(0.,0.,-1.)); +#288080 = DIRECTION('',(0.382683182554,0.923879635986,0.)); +#288081 = CYLINDRICAL_SURFACE('',#288082,0.300000118202); +#288082 = AXIS2_PLACEMENT_3D('',#288083,#288084,#288085); +#288083 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#288084 = DIRECTION('',(0.,0.,-1.)); +#288085 = DIRECTION('',(0.382683182554,0.923879635986,0.)); +#288086 = ADVANCED_FACE('',(#288087),#288112,.T.); +#288087 = FACE_BOUND('',#288088,.T.); +#288088 = EDGE_LOOP('',(#288089,#288090,#288098,#288106)); +#288089 = ORIENTED_EDGE('',*,*,#288067,.T.); +#288090 = ORIENTED_EDGE('',*,*,#288091,.T.); +#288091 = EDGE_CURVE('',#288059,#288092,#288094,.T.); +#288092 = VERTEX_POINT('',#288093); +#288093 = CARTESIAN_POINT('',(124.2695,-129.128078,1.545)); +#288094 = LINE('',#288095,#288096); +#288095 = CARTESIAN_POINT('',(124.277164,-129.114805,1.545)); +#288096 = VECTOR('',#288097,1.); +#288097 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#288098 = ORIENTED_EDGE('',*,*,#288099,.F.); +#288099 = EDGE_CURVE('',#288100,#288092,#288102,.T.); +#288100 = VERTEX_POINT('',#288101); +#288101 = CARTESIAN_POINT('',(124.2695,-129.128078,1.51)); +#288102 = LINE('',#288103,#288104); +#288103 = CARTESIAN_POINT('',(124.2695,-129.128078,1.51)); +#288104 = VECTOR('',#288105,1.); +#288105 = DIRECTION('',(0.,0.,1.)); +#288106 = ORIENTED_EDGE('',*,*,#288107,.F.); +#288107 = EDGE_CURVE('',#288068,#288100,#288108,.T.); +#288108 = LINE('',#288109,#288110); +#288109 = CARTESIAN_POINT('',(124.277164,-129.114805,1.51)); +#288110 = VECTOR('',#288111,1.); +#288111 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#288112 = PLANE('',#288113); +#288113 = AXIS2_PLACEMENT_3D('',#288114,#288115,#288116); +#288114 = CARTESIAN_POINT('',(124.277164,-129.114805,1.51)); +#288115 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#288116 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#288117 = ADVANCED_FACE('',(#288118),#288143,.T.); +#288118 = FACE_BOUND('',#288119,.T.); +#288119 = EDGE_LOOP('',(#288120,#288121,#288129,#288137)); +#288120 = ORIENTED_EDGE('',*,*,#288099,.T.); +#288121 = ORIENTED_EDGE('',*,*,#288122,.T.); +#288122 = EDGE_CURVE('',#288092,#288123,#288125,.T.); +#288123 = VERTEX_POINT('',#288124); +#288124 = CARTESIAN_POINT('',(126.291421,-131.15,1.545)); +#288125 = LINE('',#288126,#288127); +#288126 = CARTESIAN_POINT('',(124.2695,-129.128078,1.545)); +#288127 = VECTOR('',#288128,1.); +#288128 = DIRECTION('',(0.707106606326,-0.707106956047,0.)); +#288129 = ORIENTED_EDGE('',*,*,#288130,.F.); +#288130 = EDGE_CURVE('',#288131,#288123,#288133,.T.); +#288131 = VERTEX_POINT('',#288132); +#288132 = CARTESIAN_POINT('',(126.291421,-131.15,1.51)); +#288133 = LINE('',#288134,#288135); +#288134 = CARTESIAN_POINT('',(126.291421,-131.15,1.51)); +#288135 = VECTOR('',#288136,1.); +#288136 = DIRECTION('',(0.,0.,1.)); +#288137 = ORIENTED_EDGE('',*,*,#288138,.F.); +#288138 = EDGE_CURVE('',#288100,#288131,#288139,.T.); +#288139 = LINE('',#288140,#288141); +#288140 = CARTESIAN_POINT('',(124.2695,-129.128078,1.51)); +#288141 = VECTOR('',#288142,1.); +#288142 = DIRECTION('',(0.707106606326,-0.707106956047,0.)); +#288143 = PLANE('',#288144); +#288144 = AXIS2_PLACEMENT_3D('',#288145,#288146,#288147); +#288145 = CARTESIAN_POINT('',(124.2695,-129.128078,1.51)); +#288146 = DIRECTION('',(0.707106956047,0.707106606326,-0.)); +#288147 = DIRECTION('',(0.707106606326,-0.707106956047,0.)); +#288148 = ADVANCED_FACE('',(#288149),#288174,.T.); +#288149 = FACE_BOUND('',#288150,.T.); +#288150 = EDGE_LOOP('',(#288151,#288152,#288160,#288168)); +#288151 = ORIENTED_EDGE('',*,*,#288130,.T.); +#288152 = ORIENTED_EDGE('',*,*,#288153,.T.); +#288153 = EDGE_CURVE('',#288123,#288154,#288156,.T.); +#288154 = VERTEX_POINT('',#288155); +#288155 = CARTESIAN_POINT('',(134.269509,-131.151921,1.545)); +#288156 = LINE('',#288157,#288158); +#288157 = CARTESIAN_POINT('',(126.291421,-131.15,1.545)); +#288158 = VECTOR('',#288159,1.); +#288159 = DIRECTION('',(0.999999971011,-2.407845017872E-04,0.)); +#288160 = ORIENTED_EDGE('',*,*,#288161,.F.); +#288161 = EDGE_CURVE('',#288162,#288154,#288164,.T.); +#288162 = VERTEX_POINT('',#288163); +#288163 = CARTESIAN_POINT('',(134.269509,-131.151921,1.51)); +#288164 = LINE('',#288165,#288166); +#288165 = CARTESIAN_POINT('',(134.269509,-131.151921,1.51)); +#288166 = VECTOR('',#288167,1.); +#288167 = DIRECTION('',(0.,0.,1.)); +#288168 = ORIENTED_EDGE('',*,*,#288169,.F.); +#288169 = EDGE_CURVE('',#288131,#288162,#288170,.T.); +#288170 = LINE('',#288171,#288172); +#288171 = CARTESIAN_POINT('',(126.291421,-131.15,1.51)); +#288172 = VECTOR('',#288173,1.); +#288173 = DIRECTION('',(0.999999971011,-2.407845017872E-04,0.)); +#288174 = PLANE('',#288175); +#288175 = AXIS2_PLACEMENT_3D('',#288176,#288177,#288178); +#288176 = CARTESIAN_POINT('',(126.291421,-131.15,1.51)); +#288177 = DIRECTION('',(2.407845017872E-04,0.999999971011,-0.)); +#288178 = DIRECTION('',(0.999999971011,-2.407845017872E-04,0.)); +#288179 = ADVANCED_FACE('',(#288180),#288205,.T.); +#288180 = FACE_BOUND('',#288181,.T.); +#288181 = EDGE_LOOP('',(#288182,#288183,#288191,#288199)); +#288182 = ORIENTED_EDGE('',*,*,#288161,.T.); +#288183 = ORIENTED_EDGE('',*,*,#288184,.T.); +#288184 = EDGE_CURVE('',#288154,#288185,#288187,.T.); +#288185 = VERTEX_POINT('',#288186); +#288186 = CARTESIAN_POINT('',(134.305557,-131.166853,1.545)); +#288187 = LINE('',#288188,#288189); +#288188 = CARTESIAN_POINT('',(134.269509,-131.151921,1.545)); +#288189 = VECTOR('',#288190,1.); +#288190 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288191 = ORIENTED_EDGE('',*,*,#288192,.F.); +#288192 = EDGE_CURVE('',#288193,#288185,#288195,.T.); +#288193 = VERTEX_POINT('',#288194); +#288194 = CARTESIAN_POINT('',(134.305557,-131.166853,1.51)); +#288195 = LINE('',#288196,#288197); +#288196 = CARTESIAN_POINT('',(134.305557,-131.166853,1.51)); +#288197 = VECTOR('',#288198,1.); +#288198 = DIRECTION('',(0.,0.,1.)); +#288199 = ORIENTED_EDGE('',*,*,#288200,.F.); +#288200 = EDGE_CURVE('',#288162,#288193,#288201,.T.); +#288201 = LINE('',#288202,#288203); +#288202 = CARTESIAN_POINT('',(134.269509,-131.151921,1.51)); +#288203 = VECTOR('',#288204,1.); +#288204 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288205 = PLANE('',#288206); +#288206 = AXIS2_PLACEMENT_3D('',#288207,#288208,#288209); +#288207 = CARTESIAN_POINT('',(134.269509,-131.151921,1.51)); +#288208 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#288209 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288210 = ADVANCED_FACE('',(#288211),#288236,.T.); +#288211 = FACE_BOUND('',#288212,.T.); +#288212 = EDGE_LOOP('',(#288213,#288214,#288222,#288230)); +#288213 = ORIENTED_EDGE('',*,*,#288192,.T.); +#288214 = ORIENTED_EDGE('',*,*,#288215,.T.); +#288215 = EDGE_CURVE('',#288185,#288216,#288218,.T.); +#288216 = VERTEX_POINT('',#288217); +#288217 = CARTESIAN_POINT('',(134.901421,-131.76,1.545)); +#288218 = LINE('',#288219,#288220); +#288219 = CARTESIAN_POINT('',(134.305557,-131.166853,1.545)); +#288220 = VECTOR('',#288221,1.); +#288221 = DIRECTION('',(0.708720735176,-0.705489134949,0.)); +#288222 = ORIENTED_EDGE('',*,*,#288223,.F.); +#288223 = EDGE_CURVE('',#288224,#288216,#288226,.T.); +#288224 = VERTEX_POINT('',#288225); +#288225 = CARTESIAN_POINT('',(134.901421,-131.76,1.51)); +#288226 = LINE('',#288227,#288228); +#288227 = CARTESIAN_POINT('',(134.901421,-131.76,1.51)); +#288228 = VECTOR('',#288229,1.); +#288229 = DIRECTION('',(0.,0.,1.)); +#288230 = ORIENTED_EDGE('',*,*,#288231,.F.); +#288231 = EDGE_CURVE('',#288193,#288224,#288232,.T.); +#288232 = LINE('',#288233,#288234); +#288233 = CARTESIAN_POINT('',(134.305557,-131.166853,1.51)); +#288234 = VECTOR('',#288235,1.); +#288235 = DIRECTION('',(0.708720735176,-0.705489134949,0.)); +#288236 = PLANE('',#288237); +#288237 = AXIS2_PLACEMENT_3D('',#288238,#288239,#288240); +#288238 = CARTESIAN_POINT('',(134.305557,-131.166853,1.51)); +#288239 = DIRECTION('',(0.705489134949,0.708720735176,-0.)); +#288240 = DIRECTION('',(0.708720735176,-0.705489134949,0.)); +#288241 = ADVANCED_FACE('',(#288242),#288267,.T.); +#288242 = FACE_BOUND('',#288243,.T.); +#288243 = EDGE_LOOP('',(#288244,#288245,#288253,#288261)); +#288244 = ORIENTED_EDGE('',*,*,#288223,.T.); +#288245 = ORIENTED_EDGE('',*,*,#288246,.T.); +#288246 = EDGE_CURVE('',#288216,#288247,#288249,.T.); +#288247 = VERTEX_POINT('',#288248); +#288248 = CARTESIAN_POINT('',(140.078578,-131.76,1.545)); +#288249 = LINE('',#288250,#288251); +#288250 = CARTESIAN_POINT('',(134.901421,-131.76,1.545)); +#288251 = VECTOR('',#288252,1.); +#288252 = DIRECTION('',(1.,0.,0.)); +#288253 = ORIENTED_EDGE('',*,*,#288254,.F.); +#288254 = EDGE_CURVE('',#288255,#288247,#288257,.T.); +#288255 = VERTEX_POINT('',#288256); +#288256 = CARTESIAN_POINT('',(140.078578,-131.76,1.51)); +#288257 = LINE('',#288258,#288259); +#288258 = CARTESIAN_POINT('',(140.078578,-131.76,1.51)); +#288259 = VECTOR('',#288260,1.); +#288260 = DIRECTION('',(0.,0.,1.)); +#288261 = ORIENTED_EDGE('',*,*,#288262,.F.); +#288262 = EDGE_CURVE('',#288224,#288255,#288263,.T.); +#288263 = LINE('',#288264,#288265); +#288264 = CARTESIAN_POINT('',(134.901421,-131.76,1.51)); +#288265 = VECTOR('',#288266,1.); +#288266 = DIRECTION('',(1.,0.,0.)); +#288267 = PLANE('',#288268); +#288268 = AXIS2_PLACEMENT_3D('',#288269,#288270,#288271); +#288269 = CARTESIAN_POINT('',(134.901421,-131.76,1.51)); +#288270 = DIRECTION('',(0.,1.,0.)); +#288271 = DIRECTION('',(1.,0.,0.)); +#288272 = ADVANCED_FACE('',(#288273),#288298,.T.); +#288273 = FACE_BOUND('',#288274,.T.); +#288274 = EDGE_LOOP('',(#288275,#288276,#288284,#288292)); +#288275 = ORIENTED_EDGE('',*,*,#288254,.T.); +#288276 = ORIENTED_EDGE('',*,*,#288277,.T.); +#288277 = EDGE_CURVE('',#288247,#288278,#288280,.T.); +#288278 = VERTEX_POINT('',#288279); +#288279 = CARTESIAN_POINT('',(140.9,-130.938578,1.545)); +#288280 = LINE('',#288281,#288282); +#288281 = CARTESIAN_POINT('',(140.078578,-131.76,1.545)); +#288282 = VECTOR('',#288283,1.); +#288283 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#288284 = ORIENTED_EDGE('',*,*,#288285,.F.); +#288285 = EDGE_CURVE('',#288286,#288278,#288288,.T.); +#288286 = VERTEX_POINT('',#288287); +#288287 = CARTESIAN_POINT('',(140.9,-130.938578,1.51)); +#288288 = LINE('',#288289,#288290); +#288289 = CARTESIAN_POINT('',(140.9,-130.938578,1.51)); +#288290 = VECTOR('',#288291,1.); +#288291 = DIRECTION('',(0.,0.,1.)); +#288292 = ORIENTED_EDGE('',*,*,#288293,.F.); +#288293 = EDGE_CURVE('',#288255,#288286,#288294,.T.); +#288294 = LINE('',#288295,#288296); +#288295 = CARTESIAN_POINT('',(140.078578,-131.76,1.51)); +#288296 = VECTOR('',#288297,1.); +#288297 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#288298 = PLANE('',#288299); +#288299 = AXIS2_PLACEMENT_3D('',#288300,#288301,#288302); +#288300 = CARTESIAN_POINT('',(140.078578,-131.76,1.51)); +#288301 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#288302 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#288303 = ADVANCED_FACE('',(#288304),#288329,.T.); +#288304 = FACE_BOUND('',#288305,.T.); +#288305 = EDGE_LOOP('',(#288306,#288307,#288315,#288323)); +#288306 = ORIENTED_EDGE('',*,*,#288285,.T.); +#288307 = ORIENTED_EDGE('',*,*,#288308,.T.); +#288308 = EDGE_CURVE('',#288278,#288309,#288311,.T.); +#288309 = VERTEX_POINT('',#288310); +#288310 = CARTESIAN_POINT('',(140.901921,-129.960491,1.545)); +#288311 = LINE('',#288312,#288313); +#288312 = CARTESIAN_POINT('',(140.9,-130.938578,1.545)); +#288313 = VECTOR('',#288314,1.); +#288314 = DIRECTION('',(1.964034175811E-03,0.999998071283,0.)); +#288315 = ORIENTED_EDGE('',*,*,#288316,.F.); +#288316 = EDGE_CURVE('',#288317,#288309,#288319,.T.); +#288317 = VERTEX_POINT('',#288318); +#288318 = CARTESIAN_POINT('',(140.901921,-129.960491,1.51)); +#288319 = LINE('',#288320,#288321); +#288320 = CARTESIAN_POINT('',(140.901921,-129.960491,1.51)); +#288321 = VECTOR('',#288322,1.); +#288322 = DIRECTION('',(0.,0.,1.)); +#288323 = ORIENTED_EDGE('',*,*,#288324,.F.); +#288324 = EDGE_CURVE('',#288286,#288317,#288325,.T.); +#288325 = LINE('',#288326,#288327); +#288326 = CARTESIAN_POINT('',(140.9,-130.938578,1.51)); +#288327 = VECTOR('',#288328,1.); +#288328 = DIRECTION('',(1.964034175811E-03,0.999998071283,0.)); +#288329 = PLANE('',#288330); +#288330 = AXIS2_PLACEMENT_3D('',#288331,#288332,#288333); +#288331 = CARTESIAN_POINT('',(140.9,-130.938578,1.51)); +#288332 = DIRECTION('',(-0.999998071283,1.964034175811E-03,0.)); +#288333 = DIRECTION('',(1.964034175811E-03,0.999998071283,0.)); +#288334 = ADVANCED_FACE('',(#288335),#288362,.T.); +#288335 = FACE_BOUND('',#288336,.T.); +#288336 = EDGE_LOOP('',(#288337,#288338,#288347,#288355)); +#288337 = ORIENTED_EDGE('',*,*,#288316,.T.); +#288338 = ORIENTED_EDGE('',*,*,#288339,.T.); +#288339 = EDGE_CURVE('',#288309,#288340,#288342,.T.); +#288340 = VERTEX_POINT('',#288341); +#288341 = CARTESIAN_POINT('',(140.980491,-129.881921,1.545)); +#288342 = CIRCLE('',#288343,0.100002891901); +#288343 = AXIS2_PLACEMENT_3D('',#288344,#288345,#288346); +#288344 = CARTESIAN_POINT('',(141.00000207103,-129.980002071,1.545)); +#288345 = DIRECTION('',(0.,0.,-1.)); +#288346 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#288347 = ORIENTED_EDGE('',*,*,#288348,.F.); +#288348 = EDGE_CURVE('',#288349,#288340,#288351,.T.); +#288349 = VERTEX_POINT('',#288350); +#288350 = CARTESIAN_POINT('',(140.980491,-129.881921,1.51)); +#288351 = LINE('',#288352,#288353); +#288352 = CARTESIAN_POINT('',(140.980491,-129.881921,1.51)); +#288353 = VECTOR('',#288354,1.); +#288354 = DIRECTION('',(0.,0.,1.)); +#288355 = ORIENTED_EDGE('',*,*,#288356,.F.); +#288356 = EDGE_CURVE('',#288317,#288349,#288357,.T.); +#288357 = CIRCLE('',#288358,0.100002891901); +#288358 = AXIS2_PLACEMENT_3D('',#288359,#288360,#288361); +#288359 = CARTESIAN_POINT('',(141.00000207103,-129.980002071,1.51)); +#288360 = DIRECTION('',(0.,0.,-1.)); +#288361 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#288362 = CYLINDRICAL_SURFACE('',#288363,0.100002891901); +#288363 = AXIS2_PLACEMENT_3D('',#288364,#288365,#288366); +#288364 = CARTESIAN_POINT('',(141.00000207103,-129.980002071,1.51)); +#288365 = DIRECTION('',(0.,0.,-1.)); +#288366 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#288367 = ADVANCED_FACE('',(#288368),#288393,.T.); +#288368 = FACE_BOUND('',#288369,.T.); +#288369 = EDGE_LOOP('',(#288370,#288371,#288379,#288387)); +#288370 = ORIENTED_EDGE('',*,*,#288348,.T.); +#288371 = ORIENTED_EDGE('',*,*,#288372,.T.); +#288372 = EDGE_CURVE('',#288340,#288373,#288375,.T.); +#288373 = VERTEX_POINT('',#288374); +#288374 = CARTESIAN_POINT('',(142.269509,-129.881921,1.545)); +#288375 = LINE('',#288376,#288377); +#288376 = CARTESIAN_POINT('',(140.980491,-129.881921,1.545)); +#288377 = VECTOR('',#288378,1.); +#288378 = DIRECTION('',(1.,0.,0.)); +#288379 = ORIENTED_EDGE('',*,*,#288380,.F.); +#288380 = EDGE_CURVE('',#288381,#288373,#288383,.T.); +#288381 = VERTEX_POINT('',#288382); +#288382 = CARTESIAN_POINT('',(142.269509,-129.881921,1.51)); +#288383 = LINE('',#288384,#288385); +#288384 = CARTESIAN_POINT('',(142.269509,-129.881921,1.51)); +#288385 = VECTOR('',#288386,1.); +#288386 = DIRECTION('',(0.,0.,1.)); +#288387 = ORIENTED_EDGE('',*,*,#288388,.F.); +#288388 = EDGE_CURVE('',#288349,#288381,#288389,.T.); +#288389 = LINE('',#288390,#288391); +#288390 = CARTESIAN_POINT('',(140.980491,-129.881921,1.51)); +#288391 = VECTOR('',#288392,1.); +#288392 = DIRECTION('',(1.,0.,0.)); +#288393 = PLANE('',#288394); +#288394 = AXIS2_PLACEMENT_3D('',#288395,#288396,#288397); +#288395 = CARTESIAN_POINT('',(140.980491,-129.881921,1.51)); +#288396 = DIRECTION('',(0.,1.,0.)); +#288397 = DIRECTION('',(1.,0.,0.)); +#288398 = ADVANCED_FACE('',(#288399),#288424,.T.); +#288399 = FACE_BOUND('',#288400,.T.); +#288400 = EDGE_LOOP('',(#288401,#288402,#288410,#288418)); +#288401 = ORIENTED_EDGE('',*,*,#288380,.T.); +#288402 = ORIENTED_EDGE('',*,*,#288403,.T.); +#288403 = EDGE_CURVE('',#288373,#288404,#288406,.T.); +#288404 = VERTEX_POINT('',#288405); +#288405 = CARTESIAN_POINT('',(142.305557,-129.896853,1.545)); +#288406 = LINE('',#288407,#288408); +#288407 = CARTESIAN_POINT('',(142.269509,-129.881921,1.545)); +#288408 = VECTOR('',#288409,1.); +#288409 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288410 = ORIENTED_EDGE('',*,*,#288411,.F.); +#288411 = EDGE_CURVE('',#288412,#288404,#288414,.T.); +#288412 = VERTEX_POINT('',#288413); +#288413 = CARTESIAN_POINT('',(142.305557,-129.896853,1.51)); +#288414 = LINE('',#288415,#288416); +#288415 = CARTESIAN_POINT('',(142.305557,-129.896853,1.51)); +#288416 = VECTOR('',#288417,1.); +#288417 = DIRECTION('',(0.,0.,1.)); +#288418 = ORIENTED_EDGE('',*,*,#288419,.F.); +#288419 = EDGE_CURVE('',#288381,#288412,#288420,.T.); +#288420 = LINE('',#288421,#288422); +#288421 = CARTESIAN_POINT('',(142.269509,-129.881921,1.51)); +#288422 = VECTOR('',#288423,1.); +#288423 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288424 = PLANE('',#288425); +#288425 = AXIS2_PLACEMENT_3D('',#288426,#288427,#288428); +#288426 = CARTESIAN_POINT('',(142.269509,-129.881921,1.51)); +#288427 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#288428 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288429 = ADVANCED_FACE('',(#288430),#288455,.T.); +#288430 = FACE_BOUND('',#288431,.T.); +#288431 = EDGE_LOOP('',(#288432,#288433,#288441,#288449)); +#288432 = ORIENTED_EDGE('',*,*,#288411,.T.); +#288433 = ORIENTED_EDGE('',*,*,#288434,.T.); +#288434 = EDGE_CURVE('',#288404,#288435,#288437,.T.); +#288435 = VERTEX_POINT('',#288436); +#288436 = CARTESIAN_POINT('',(143.086422,-130.675,1.545)); +#288437 = LINE('',#288438,#288439); +#288438 = CARTESIAN_POINT('',(142.305557,-129.896853,1.545)); +#288439 = VECTOR('',#288440,1.); +#288440 = DIRECTION('',(0.708338483039,-0.705872930099,0.)); +#288441 = ORIENTED_EDGE('',*,*,#288442,.F.); +#288442 = EDGE_CURVE('',#288443,#288435,#288445,.T.); +#288443 = VERTEX_POINT('',#288444); +#288444 = CARTESIAN_POINT('',(143.086422,-130.675,1.51)); +#288445 = LINE('',#288446,#288447); +#288446 = CARTESIAN_POINT('',(143.086422,-130.675,1.51)); +#288447 = VECTOR('',#288448,1.); +#288448 = DIRECTION('',(0.,0.,1.)); +#288449 = ORIENTED_EDGE('',*,*,#288450,.F.); +#288450 = EDGE_CURVE('',#288412,#288443,#288451,.T.); +#288451 = LINE('',#288452,#288453); +#288452 = CARTESIAN_POINT('',(142.305557,-129.896853,1.51)); +#288453 = VECTOR('',#288454,1.); +#288454 = DIRECTION('',(0.708338483039,-0.705872930099,0.)); +#288455 = PLANE('',#288456); +#288456 = AXIS2_PLACEMENT_3D('',#288457,#288458,#288459); +#288457 = CARTESIAN_POINT('',(142.305557,-129.896853,1.51)); +#288458 = DIRECTION('',(0.705872930099,0.708338483039,-0.)); +#288459 = DIRECTION('',(0.708338483039,-0.705872930099,0.)); +#288460 = ADVANCED_FACE('',(#288461),#288486,.T.); +#288461 = FACE_BOUND('',#288462,.T.); +#288462 = EDGE_LOOP('',(#288463,#288464,#288472,#288480)); +#288463 = ORIENTED_EDGE('',*,*,#288442,.T.); +#288464 = ORIENTED_EDGE('',*,*,#288465,.T.); +#288465 = EDGE_CURVE('',#288435,#288466,#288468,.T.); +#288466 = VERTEX_POINT('',#288467); +#288467 = CARTESIAN_POINT('',(143.769509,-130.676921,1.545)); +#288468 = LINE('',#288469,#288470); +#288469 = CARTESIAN_POINT('',(143.086422,-130.675,1.545)); +#288470 = VECTOR('',#288471,1.); +#288471 = DIRECTION('',(0.999996045695,-2.812222167546E-03,0.)); +#288472 = ORIENTED_EDGE('',*,*,#288473,.F.); +#288473 = EDGE_CURVE('',#288474,#288466,#288476,.T.); +#288474 = VERTEX_POINT('',#288475); +#288475 = CARTESIAN_POINT('',(143.769509,-130.676921,1.51)); +#288476 = LINE('',#288477,#288478); +#288477 = CARTESIAN_POINT('',(143.769509,-130.676921,1.51)); +#288478 = VECTOR('',#288479,1.); +#288479 = DIRECTION('',(0.,0.,1.)); +#288480 = ORIENTED_EDGE('',*,*,#288481,.F.); +#288481 = EDGE_CURVE('',#288443,#288474,#288482,.T.); +#288482 = LINE('',#288483,#288484); +#288483 = CARTESIAN_POINT('',(143.086422,-130.675,1.51)); +#288484 = VECTOR('',#288485,1.); +#288485 = DIRECTION('',(0.999996045695,-2.812222167546E-03,0.)); +#288486 = PLANE('',#288487); +#288487 = AXIS2_PLACEMENT_3D('',#288488,#288489,#288490); +#288488 = CARTESIAN_POINT('',(143.086422,-130.675,1.51)); +#288489 = DIRECTION('',(2.812222167546E-03,0.999996045695,-0.)); +#288490 = DIRECTION('',(0.999996045695,-2.812222167546E-03,0.)); +#288491 = ADVANCED_FACE('',(#288492),#288519,.T.); +#288492 = FACE_BOUND('',#288493,.T.); +#288493 = EDGE_LOOP('',(#288494,#288495,#288504,#288512)); +#288494 = ORIENTED_EDGE('',*,*,#288473,.T.); +#288495 = ORIENTED_EDGE('',*,*,#288496,.T.); +#288496 = EDGE_CURVE('',#288466,#288497,#288499,.T.); +#288497 = VERTEX_POINT('',#288498); +#288498 = CARTESIAN_POINT('',(143.769509,-130.873079,1.545)); +#288499 = CIRCLE('',#288500,0.100000456609); +#288500 = AXIS2_PLACEMENT_3D('',#288501,#288502,#288503); +#288501 = CARTESIAN_POINT('',(143.75,-130.775,1.545)); +#288502 = DIRECTION('',(0.,0.,-1.)); +#288503 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#288504 = ORIENTED_EDGE('',*,*,#288505,.F.); +#288505 = EDGE_CURVE('',#288506,#288497,#288508,.T.); +#288506 = VERTEX_POINT('',#288507); +#288507 = CARTESIAN_POINT('',(143.769509,-130.873079,1.51)); +#288508 = LINE('',#288509,#288510); +#288509 = CARTESIAN_POINT('',(143.769509,-130.873079,1.51)); +#288510 = VECTOR('',#288511,1.); +#288511 = DIRECTION('',(0.,0.,1.)); +#288512 = ORIENTED_EDGE('',*,*,#288513,.F.); +#288513 = EDGE_CURVE('',#288474,#288506,#288514,.T.); +#288514 = CIRCLE('',#288515,0.100000456609); +#288515 = AXIS2_PLACEMENT_3D('',#288516,#288517,#288518); +#288516 = CARTESIAN_POINT('',(143.75,-130.775,1.51)); +#288517 = DIRECTION('',(0.,0.,-1.)); +#288518 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#288519 = CYLINDRICAL_SURFACE('',#288520,0.100000456609); +#288520 = AXIS2_PLACEMENT_3D('',#288521,#288522,#288523); +#288521 = CARTESIAN_POINT('',(143.75,-130.775,1.51)); +#288522 = DIRECTION('',(0.,0.,-1.)); +#288523 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#288524 = ADVANCED_FACE('',(#288525),#288550,.T.); +#288525 = FACE_BOUND('',#288526,.T.); +#288526 = EDGE_LOOP('',(#288527,#288528,#288536,#288544)); +#288527 = ORIENTED_EDGE('',*,*,#288505,.T.); +#288528 = ORIENTED_EDGE('',*,*,#288529,.T.); +#288529 = EDGE_CURVE('',#288497,#288530,#288532,.T.); +#288530 = VERTEX_POINT('',#288531); +#288531 = CARTESIAN_POINT('',(143.316422,-130.875,1.545)); +#288532 = LINE('',#288533,#288534); +#288533 = CARTESIAN_POINT('',(143.769509,-130.873079,1.545)); +#288534 = VECTOR('',#288535,1.); +#288535 = DIRECTION('',(-0.999991012153,-4.239765727897E-03,0.)); +#288536 = ORIENTED_EDGE('',*,*,#288537,.F.); +#288537 = EDGE_CURVE('',#288538,#288530,#288540,.T.); +#288538 = VERTEX_POINT('',#288539); +#288539 = CARTESIAN_POINT('',(143.316422,-130.875,1.51)); +#288540 = LINE('',#288541,#288542); +#288541 = CARTESIAN_POINT('',(143.316422,-130.875,1.51)); +#288542 = VECTOR('',#288543,1.); +#288543 = DIRECTION('',(0.,0.,1.)); +#288544 = ORIENTED_EDGE('',*,*,#288545,.F.); +#288545 = EDGE_CURVE('',#288506,#288538,#288546,.T.); +#288546 = LINE('',#288547,#288548); +#288547 = CARTESIAN_POINT('',(143.769509,-130.873079,1.51)); +#288548 = VECTOR('',#288549,1.); +#288549 = DIRECTION('',(-0.999991012153,-4.239765727897E-03,0.)); +#288550 = PLANE('',#288551); +#288551 = AXIS2_PLACEMENT_3D('',#288552,#288553,#288554); +#288552 = CARTESIAN_POINT('',(143.769509,-130.873079,1.51)); +#288553 = DIRECTION('',(4.239765727897E-03,-0.999991012153,0.)); +#288554 = DIRECTION('',(-0.999991012153,-4.239765727897E-03,0.)); +#288555 = ADVANCED_FACE('',(#288556),#288581,.T.); +#288556 = FACE_BOUND('',#288557,.T.); +#288557 = EDGE_LOOP('',(#288558,#288559,#288567,#288575)); +#288558 = ORIENTED_EDGE('',*,*,#288537,.T.); +#288559 = ORIENTED_EDGE('',*,*,#288560,.T.); +#288560 = EDGE_CURVE('',#288530,#288561,#288563,.T.); +#288561 = VERTEX_POINT('',#288562); +#288562 = CARTESIAN_POINT('',(141.6,-132.591422,1.545)); +#288563 = LINE('',#288564,#288565); +#288564 = CARTESIAN_POINT('',(143.316422,-130.875,1.545)); +#288565 = VECTOR('',#288566,1.); +#288566 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#288567 = ORIENTED_EDGE('',*,*,#288568,.F.); +#288568 = EDGE_CURVE('',#288569,#288561,#288571,.T.); +#288569 = VERTEX_POINT('',#288570); +#288570 = CARTESIAN_POINT('',(141.6,-132.591422,1.51)); +#288571 = LINE('',#288572,#288573); +#288572 = CARTESIAN_POINT('',(141.6,-132.591422,1.51)); +#288573 = VECTOR('',#288574,1.); +#288574 = DIRECTION('',(0.,0.,1.)); +#288575 = ORIENTED_EDGE('',*,*,#288576,.F.); +#288576 = EDGE_CURVE('',#288538,#288569,#288577,.T.); +#288577 = LINE('',#288578,#288579); +#288578 = CARTESIAN_POINT('',(143.316422,-130.875,1.51)); +#288579 = VECTOR('',#288580,1.); +#288580 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#288581 = PLANE('',#288582); +#288582 = AXIS2_PLACEMENT_3D('',#288583,#288584,#288585); +#288583 = CARTESIAN_POINT('',(143.316422,-130.875,1.51)); +#288584 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#288585 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#288586 = ADVANCED_FACE('',(#288587),#288612,.T.); +#288587 = FACE_BOUND('',#288588,.T.); +#288588 = EDGE_LOOP('',(#288589,#288590,#288598,#288606)); +#288589 = ORIENTED_EDGE('',*,*,#288568,.T.); +#288590 = ORIENTED_EDGE('',*,*,#288591,.T.); +#288591 = EDGE_CURVE('',#288561,#288592,#288594,.T.); +#288592 = VERTEX_POINT('',#288593); +#288593 = CARTESIAN_POINT('',(141.6,-133.508578,1.545)); +#288594 = LINE('',#288595,#288596); +#288595 = CARTESIAN_POINT('',(141.6,-132.591422,1.545)); +#288596 = VECTOR('',#288597,1.); +#288597 = DIRECTION('',(0.,-1.,0.)); +#288598 = ORIENTED_EDGE('',*,*,#288599,.F.); +#288599 = EDGE_CURVE('',#288600,#288592,#288602,.T.); +#288600 = VERTEX_POINT('',#288601); +#288601 = CARTESIAN_POINT('',(141.6,-133.508578,1.51)); +#288602 = LINE('',#288603,#288604); +#288603 = CARTESIAN_POINT('',(141.6,-133.508578,1.51)); +#288604 = VECTOR('',#288605,1.); +#288605 = DIRECTION('',(0.,0.,1.)); +#288606 = ORIENTED_EDGE('',*,*,#288607,.F.); +#288607 = EDGE_CURVE('',#288569,#288600,#288608,.T.); +#288608 = LINE('',#288609,#288610); +#288609 = CARTESIAN_POINT('',(141.6,-132.591422,1.51)); +#288610 = VECTOR('',#288611,1.); +#288611 = DIRECTION('',(0.,-1.,0.)); +#288612 = PLANE('',#288613); +#288613 = AXIS2_PLACEMENT_3D('',#288614,#288615,#288616); +#288614 = CARTESIAN_POINT('',(141.6,-132.591422,1.51)); +#288615 = DIRECTION('',(1.,0.,-0.)); +#288616 = DIRECTION('',(0.,-1.,0.)); +#288617 = ADVANCED_FACE('',(#288618),#288643,.T.); +#288618 = FACE_BOUND('',#288619,.T.); +#288619 = EDGE_LOOP('',(#288620,#288621,#288629,#288637)); +#288620 = ORIENTED_EDGE('',*,*,#288599,.T.); +#288621 = ORIENTED_EDGE('',*,*,#288622,.T.); +#288622 = EDGE_CURVE('',#288592,#288623,#288625,.T.); +#288623 = VERTEX_POINT('',#288624); +#288624 = CARTESIAN_POINT('',(142.583148,-134.494443,1.545)); +#288625 = LINE('',#288626,#288627); +#288626 = CARTESIAN_POINT('',(141.6,-133.508578,1.545)); +#288627 = VECTOR('',#288628,1.); +#288628 = DIRECTION('',(0.706130387018,-0.708081828979,0.)); +#288629 = ORIENTED_EDGE('',*,*,#288630,.F.); +#288630 = EDGE_CURVE('',#288631,#288623,#288633,.T.); +#288631 = VERTEX_POINT('',#288632); +#288632 = CARTESIAN_POINT('',(142.583148,-134.494443,1.51)); +#288633 = LINE('',#288634,#288635); +#288634 = CARTESIAN_POINT('',(142.583148,-134.494443,1.51)); +#288635 = VECTOR('',#288636,1.); +#288636 = DIRECTION('',(0.,0.,1.)); +#288637 = ORIENTED_EDGE('',*,*,#288638,.F.); +#288638 = EDGE_CURVE('',#288600,#288631,#288639,.T.); +#288639 = LINE('',#288640,#288641); +#288640 = CARTESIAN_POINT('',(141.6,-133.508578,1.51)); +#288641 = VECTOR('',#288642,1.); +#288642 = DIRECTION('',(0.706130387018,-0.708081828979,0.)); +#288643 = PLANE('',#288644); +#288644 = AXIS2_PLACEMENT_3D('',#288645,#288646,#288647); +#288645 = CARTESIAN_POINT('',(141.6,-133.508578,1.51)); +#288646 = DIRECTION('',(0.708081828979,0.706130387018,-0.)); +#288647 = DIRECTION('',(0.706130387018,-0.708081828979,0.)); +#288648 = ADVANCED_FACE('',(#288649),#288676,.T.); +#288649 = FACE_BOUND('',#288650,.T.); +#288650 = EDGE_LOOP('',(#288651,#288652,#288661,#288669)); +#288651 = ORIENTED_EDGE('',*,*,#288630,.T.); +#288652 = ORIENTED_EDGE('',*,*,#288653,.T.); +#288653 = EDGE_CURVE('',#288623,#288654,#288656,.T.); +#288654 = VERTEX_POINT('',#288655); +#288655 = CARTESIAN_POINT('',(142.444443,-134.633148,1.545)); +#288656 = CIRCLE('',#288657,0.10000071281); +#288657 = AXIS2_PLACEMENT_3D('',#288658,#288659,#288660); +#288658 = CARTESIAN_POINT('',(142.5000005,-134.5500005,1.545)); +#288659 = DIRECTION('',(0.,0.,-1.)); +#288660 = DIRECTION('',(0.831469073205,0.555571039835,0.)); +#288661 = ORIENTED_EDGE('',*,*,#288662,.F.); +#288662 = EDGE_CURVE('',#288663,#288654,#288665,.T.); +#288663 = VERTEX_POINT('',#288664); +#288664 = CARTESIAN_POINT('',(142.444443,-134.633148,1.51)); +#288665 = LINE('',#288666,#288667); +#288666 = CARTESIAN_POINT('',(142.444443,-134.633148,1.51)); +#288667 = VECTOR('',#288668,1.); +#288668 = DIRECTION('',(0.,0.,1.)); +#288669 = ORIENTED_EDGE('',*,*,#288670,.F.); +#288670 = EDGE_CURVE('',#288631,#288663,#288671,.T.); +#288671 = CIRCLE('',#288672,0.10000071281); +#288672 = AXIS2_PLACEMENT_3D('',#288673,#288674,#288675); +#288673 = CARTESIAN_POINT('',(142.5000005,-134.5500005,1.51)); +#288674 = DIRECTION('',(0.,0.,-1.)); +#288675 = DIRECTION('',(0.831469073205,0.555571039835,0.)); +#288676 = CYLINDRICAL_SURFACE('',#288677,0.10000071281); +#288677 = AXIS2_PLACEMENT_3D('',#288678,#288679,#288680); +#288678 = CARTESIAN_POINT('',(142.5000005,-134.5500005,1.51)); +#288679 = DIRECTION('',(0.,0.,-1.)); +#288680 = DIRECTION('',(0.831469073205,0.555571039835,0.)); +#288681 = ADVANCED_FACE('',(#288682),#288707,.T.); +#288682 = FACE_BOUND('',#288683,.T.); +#288683 = EDGE_LOOP('',(#288684,#288685,#288693,#288701)); +#288684 = ORIENTED_EDGE('',*,*,#288662,.T.); +#288685 = ORIENTED_EDGE('',*,*,#288686,.T.); +#288686 = EDGE_CURVE('',#288654,#288687,#288689,.T.); +#288687 = VERTEX_POINT('',#288688); +#288688 = CARTESIAN_POINT('',(141.416853,-133.605557,1.545)); +#288689 = LINE('',#288690,#288691); +#288690 = CARTESIAN_POINT('',(142.444443,-134.633148,1.545)); +#288691 = VECTOR('',#288692,1.); +#288692 = DIRECTION('',(-0.707106437126,0.707107125247,0.)); +#288693 = ORIENTED_EDGE('',*,*,#288694,.F.); +#288694 = EDGE_CURVE('',#288695,#288687,#288697,.T.); +#288695 = VERTEX_POINT('',#288696); +#288696 = CARTESIAN_POINT('',(141.416853,-133.605557,1.51)); +#288697 = LINE('',#288698,#288699); +#288698 = CARTESIAN_POINT('',(141.416853,-133.605557,1.51)); +#288699 = VECTOR('',#288700,1.); +#288700 = DIRECTION('',(0.,0.,1.)); +#288701 = ORIENTED_EDGE('',*,*,#288702,.F.); +#288702 = EDGE_CURVE('',#288663,#288695,#288703,.T.); +#288703 = LINE('',#288704,#288705); +#288704 = CARTESIAN_POINT('',(142.444443,-134.633148,1.51)); +#288705 = VECTOR('',#288706,1.); +#288706 = DIRECTION('',(-0.707106437126,0.707107125247,0.)); +#288707 = PLANE('',#288708); +#288708 = AXIS2_PLACEMENT_3D('',#288709,#288710,#288711); +#288709 = CARTESIAN_POINT('',(142.444443,-134.633148,1.51)); +#288710 = DIRECTION('',(-0.707107125247,-0.707106437126,0.)); +#288711 = DIRECTION('',(-0.707106437126,0.707107125247,0.)); +#288712 = ADVANCED_FACE('',(#288713),#288738,.T.); +#288713 = FACE_BOUND('',#288714,.T.); +#288714 = EDGE_LOOP('',(#288715,#288716,#288724,#288732)); +#288715 = ORIENTED_EDGE('',*,*,#288694,.T.); +#288716 = ORIENTED_EDGE('',*,*,#288717,.T.); +#288717 = EDGE_CURVE('',#288687,#288718,#288720,.T.); +#288718 = VERTEX_POINT('',#288719); +#288719 = CARTESIAN_POINT('',(141.401921,-133.569509,1.545)); +#288720 = LINE('',#288721,#288722); +#288721 = CARTESIAN_POINT('',(141.416853,-133.605557,1.545)); +#288722 = VECTOR('',#288723,1.); +#288723 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#288724 = ORIENTED_EDGE('',*,*,#288725,.F.); +#288725 = EDGE_CURVE('',#288726,#288718,#288728,.T.); +#288726 = VERTEX_POINT('',#288727); +#288727 = CARTESIAN_POINT('',(141.401921,-133.569509,1.51)); +#288728 = LINE('',#288729,#288730); +#288729 = CARTESIAN_POINT('',(141.401921,-133.569509,1.51)); +#288730 = VECTOR('',#288731,1.); +#288731 = DIRECTION('',(0.,0.,1.)); +#288732 = ORIENTED_EDGE('',*,*,#288733,.F.); +#288733 = EDGE_CURVE('',#288695,#288726,#288734,.T.); +#288734 = LINE('',#288735,#288736); +#288735 = CARTESIAN_POINT('',(141.416853,-133.605557,1.51)); +#288736 = VECTOR('',#288737,1.); +#288737 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#288738 = PLANE('',#288739); +#288739 = AXIS2_PLACEMENT_3D('',#288740,#288741,#288742); +#288740 = CARTESIAN_POINT('',(141.416853,-133.605557,1.51)); +#288741 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#288742 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#288743 = ADVANCED_FACE('',(#288744),#288769,.T.); +#288744 = FACE_BOUND('',#288745,.T.); +#288745 = EDGE_LOOP('',(#288746,#288747,#288755,#288763)); +#288746 = ORIENTED_EDGE('',*,*,#288725,.T.); +#288747 = ORIENTED_EDGE('',*,*,#288748,.T.); +#288748 = EDGE_CURVE('',#288718,#288749,#288751,.T.); +#288749 = VERTEX_POINT('',#288750); +#288750 = CARTESIAN_POINT('',(141.401921,-132.530491,1.545)); +#288751 = LINE('',#288752,#288753); +#288752 = CARTESIAN_POINT('',(141.401921,-133.569509,1.545)); +#288753 = VECTOR('',#288754,1.); +#288754 = DIRECTION('',(0.,1.,0.)); +#288755 = ORIENTED_EDGE('',*,*,#288756,.F.); +#288756 = EDGE_CURVE('',#288757,#288749,#288759,.T.); +#288757 = VERTEX_POINT('',#288758); +#288758 = CARTESIAN_POINT('',(141.401921,-132.530491,1.51)); +#288759 = LINE('',#288760,#288761); +#288760 = CARTESIAN_POINT('',(141.401921,-132.530491,1.51)); +#288761 = VECTOR('',#288762,1.); +#288762 = DIRECTION('',(0.,0.,1.)); +#288763 = ORIENTED_EDGE('',*,*,#288764,.F.); +#288764 = EDGE_CURVE('',#288726,#288757,#288765,.T.); +#288765 = LINE('',#288766,#288767); +#288766 = CARTESIAN_POINT('',(141.401921,-133.569509,1.51)); +#288767 = VECTOR('',#288768,1.); +#288768 = DIRECTION('',(0.,1.,0.)); +#288769 = PLANE('',#288770); +#288770 = AXIS2_PLACEMENT_3D('',#288771,#288772,#288773); +#288771 = CARTESIAN_POINT('',(141.401921,-133.569509,1.51)); +#288772 = DIRECTION('',(-1.,0.,0.)); +#288773 = DIRECTION('',(0.,1.,0.)); +#288774 = ADVANCED_FACE('',(#288775),#288800,.T.); +#288775 = FACE_BOUND('',#288776,.T.); +#288776 = EDGE_LOOP('',(#288777,#288778,#288786,#288794)); +#288777 = ORIENTED_EDGE('',*,*,#288756,.T.); +#288778 = ORIENTED_EDGE('',*,*,#288779,.T.); +#288779 = EDGE_CURVE('',#288749,#288780,#288782,.T.); +#288780 = VERTEX_POINT('',#288781); +#288781 = CARTESIAN_POINT('',(141.416853,-132.494443,1.545)); +#288782 = LINE('',#288783,#288784); +#288783 = CARTESIAN_POINT('',(141.401921,-132.530491,1.545)); +#288784 = VECTOR('',#288785,1.); +#288785 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#288786 = ORIENTED_EDGE('',*,*,#288787,.F.); +#288787 = EDGE_CURVE('',#288788,#288780,#288790,.T.); +#288788 = VERTEX_POINT('',#288789); +#288789 = CARTESIAN_POINT('',(141.416853,-132.494443,1.51)); +#288790 = LINE('',#288791,#288792); +#288791 = CARTESIAN_POINT('',(141.416853,-132.494443,1.51)); +#288792 = VECTOR('',#288793,1.); +#288793 = DIRECTION('',(0.,0.,1.)); +#288794 = ORIENTED_EDGE('',*,*,#288795,.F.); +#288795 = EDGE_CURVE('',#288757,#288788,#288796,.T.); +#288796 = LINE('',#288797,#288798); +#288797 = CARTESIAN_POINT('',(141.401921,-132.530491,1.51)); +#288798 = VECTOR('',#288799,1.); +#288799 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#288800 = PLANE('',#288801); +#288801 = AXIS2_PLACEMENT_3D('',#288802,#288803,#288804); +#288802 = CARTESIAN_POINT('',(141.401921,-132.530491,1.51)); +#288803 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#288804 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#288805 = ADVANCED_FACE('',(#288806),#288831,.T.); +#288806 = FACE_BOUND('',#288807,.T.); +#288807 = EDGE_LOOP('',(#288808,#288809,#288817,#288825)); +#288808 = ORIENTED_EDGE('',*,*,#288787,.T.); +#288809 = ORIENTED_EDGE('',*,*,#288810,.T.); +#288810 = EDGE_CURVE('',#288780,#288811,#288813,.T.); +#288811 = VERTEX_POINT('',#288812); +#288812 = CARTESIAN_POINT('',(143.034601,-130.873976,1.545)); +#288813 = LINE('',#288814,#288815); +#288814 = CARTESIAN_POINT('',(141.416853,-132.494443,1.545)); +#288815 = VECTOR('',#288816,1.); +#288816 = DIRECTION('',(0.706512802765,0.707700261078,0.)); +#288817 = ORIENTED_EDGE('',*,*,#288818,.F.); +#288818 = EDGE_CURVE('',#288819,#288811,#288821,.T.); +#288819 = VERTEX_POINT('',#288820); +#288820 = CARTESIAN_POINT('',(143.034601,-130.873976,1.51)); +#288821 = LINE('',#288822,#288823); +#288822 = CARTESIAN_POINT('',(143.034601,-130.873976,1.51)); +#288823 = VECTOR('',#288824,1.); +#288824 = DIRECTION('',(0.,0.,1.)); +#288825 = ORIENTED_EDGE('',*,*,#288826,.F.); +#288826 = EDGE_CURVE('',#288788,#288819,#288827,.T.); +#288827 = LINE('',#288828,#288829); +#288828 = CARTESIAN_POINT('',(141.416853,-132.494443,1.51)); +#288829 = VECTOR('',#288830,1.); +#288830 = DIRECTION('',(0.706512802765,0.707700261078,0.)); +#288831 = PLANE('',#288832); +#288832 = AXIS2_PLACEMENT_3D('',#288833,#288834,#288835); +#288833 = CARTESIAN_POINT('',(141.416853,-132.494443,1.51)); +#288834 = DIRECTION('',(-0.707700261078,0.706512802765,0.)); +#288835 = DIRECTION('',(0.706512802765,0.707700261078,0.)); +#288836 = ADVANCED_FACE('',(#288837),#288862,.T.); +#288837 = FACE_BOUND('',#288838,.T.); +#288838 = EDGE_LOOP('',(#288839,#288840,#288848,#288856)); +#288839 = ORIENTED_EDGE('',*,*,#288818,.T.); +#288840 = ORIENTED_EDGE('',*,*,#288841,.T.); +#288841 = EDGE_CURVE('',#288811,#288842,#288844,.T.); +#288842 = VERTEX_POINT('',#288843); +#288843 = CARTESIAN_POINT('',(142.989443,-130.858147,1.545)); +#288844 = LINE('',#288845,#288846); +#288845 = CARTESIAN_POINT('',(143.034601,-130.873976,1.545)); +#288846 = VECTOR('',#288847,1.); +#288847 = DIRECTION('',(-0.943703823454,0.330791616578,0.)); +#288848 = ORIENTED_EDGE('',*,*,#288849,.F.); +#288849 = EDGE_CURVE('',#288850,#288842,#288852,.T.); +#288850 = VERTEX_POINT('',#288851); +#288851 = CARTESIAN_POINT('',(142.989443,-130.858147,1.51)); +#288852 = LINE('',#288853,#288854); +#288853 = CARTESIAN_POINT('',(142.989443,-130.858147,1.51)); +#288854 = VECTOR('',#288855,1.); +#288855 = DIRECTION('',(0.,0.,1.)); +#288856 = ORIENTED_EDGE('',*,*,#288857,.F.); +#288857 = EDGE_CURVE('',#288819,#288850,#288858,.T.); +#288858 = LINE('',#288859,#288860); +#288859 = CARTESIAN_POINT('',(143.034601,-130.873976,1.51)); +#288860 = VECTOR('',#288861,1.); +#288861 = DIRECTION('',(-0.943703823454,0.330791616578,0.)); +#288862 = PLANE('',#288863); +#288863 = AXIS2_PLACEMENT_3D('',#288864,#288865,#288866); +#288864 = CARTESIAN_POINT('',(143.034601,-130.873976,1.51)); +#288865 = DIRECTION('',(-0.330791616578,-0.943703823454,0.)); +#288866 = DIRECTION('',(-0.943703823454,0.330791616578,0.)); +#288867 = ADVANCED_FACE('',(#288868),#288893,.T.); +#288868 = FACE_BOUND('',#288869,.T.); +#288869 = EDGE_LOOP('',(#288870,#288871,#288879,#288887)); +#288870 = ORIENTED_EDGE('',*,*,#288849,.T.); +#288871 = ORIENTED_EDGE('',*,*,#288872,.T.); +#288872 = EDGE_CURVE('',#288842,#288873,#288875,.T.); +#288873 = VERTEX_POINT('',#288874); +#288874 = CARTESIAN_POINT('',(142.208578,-130.08,1.545)); +#288875 = LINE('',#288876,#288877); +#288876 = CARTESIAN_POINT('',(142.989443,-130.858147,1.545)); +#288877 = VECTOR('',#288878,1.); +#288878 = DIRECTION('',(-0.708338483039,0.705872930099,0.)); +#288879 = ORIENTED_EDGE('',*,*,#288880,.F.); +#288880 = EDGE_CURVE('',#288881,#288873,#288883,.T.); +#288881 = VERTEX_POINT('',#288882); +#288882 = CARTESIAN_POINT('',(142.208578,-130.08,1.51)); +#288883 = LINE('',#288884,#288885); +#288884 = CARTESIAN_POINT('',(142.208578,-130.08,1.51)); +#288885 = VECTOR('',#288886,1.); +#288886 = DIRECTION('',(0.,0.,1.)); +#288887 = ORIENTED_EDGE('',*,*,#288888,.F.); +#288888 = EDGE_CURVE('',#288850,#288881,#288889,.T.); +#288889 = LINE('',#288890,#288891); +#288890 = CARTESIAN_POINT('',(142.989443,-130.858147,1.51)); +#288891 = VECTOR('',#288892,1.); +#288892 = DIRECTION('',(-0.708338483039,0.705872930099,0.)); +#288893 = PLANE('',#288894); +#288894 = AXIS2_PLACEMENT_3D('',#288895,#288896,#288897); +#288895 = CARTESIAN_POINT('',(142.989443,-130.858147,1.51)); +#288896 = DIRECTION('',(-0.705872930099,-0.708338483039,0.)); +#288897 = DIRECTION('',(-0.708338483039,0.705872930099,0.)); +#288898 = ADVANCED_FACE('',(#288899),#288924,.T.); +#288899 = FACE_BOUND('',#288900,.T.); +#288900 = EDGE_LOOP('',(#288901,#288902,#288910,#288918)); +#288901 = ORIENTED_EDGE('',*,*,#288880,.T.); +#288902 = ORIENTED_EDGE('',*,*,#288903,.T.); +#288903 = EDGE_CURVE('',#288873,#288904,#288906,.T.); +#288904 = VERTEX_POINT('',#288905); +#288905 = CARTESIAN_POINT('',(141.1,-130.08,1.545)); +#288906 = LINE('',#288907,#288908); +#288907 = CARTESIAN_POINT('',(142.208578,-130.08,1.545)); +#288908 = VECTOR('',#288909,1.); +#288909 = DIRECTION('',(-1.,0.,0.)); +#288910 = ORIENTED_EDGE('',*,*,#288911,.F.); +#288911 = EDGE_CURVE('',#288912,#288904,#288914,.T.); +#288912 = VERTEX_POINT('',#288913); +#288913 = CARTESIAN_POINT('',(141.1,-130.08,1.51)); +#288914 = LINE('',#288915,#288916); +#288915 = CARTESIAN_POINT('',(141.1,-130.08,1.51)); +#288916 = VECTOR('',#288917,1.); +#288917 = DIRECTION('',(0.,0.,1.)); +#288918 = ORIENTED_EDGE('',*,*,#288919,.F.); +#288919 = EDGE_CURVE('',#288881,#288912,#288920,.T.); +#288920 = LINE('',#288921,#288922); +#288921 = CARTESIAN_POINT('',(142.208578,-130.08,1.51)); +#288922 = VECTOR('',#288923,1.); +#288923 = DIRECTION('',(-1.,0.,0.)); +#288924 = PLANE('',#288925); +#288925 = AXIS2_PLACEMENT_3D('',#288926,#288927,#288928); +#288926 = CARTESIAN_POINT('',(142.208578,-130.08,1.51)); +#288927 = DIRECTION('',(0.,-1.,0.)); +#288928 = DIRECTION('',(-1.,0.,0.)); +#288929 = ADVANCED_FACE('',(#288930),#288955,.T.); +#288930 = FACE_BOUND('',#288931,.T.); +#288931 = EDGE_LOOP('',(#288932,#288933,#288941,#288949)); +#288932 = ORIENTED_EDGE('',*,*,#288911,.T.); +#288933 = ORIENTED_EDGE('',*,*,#288934,.T.); +#288934 = EDGE_CURVE('',#288904,#288935,#288937,.T.); +#288935 = VERTEX_POINT('',#288936); +#288936 = CARTESIAN_POINT('',(141.098079,-130.999509,1.545)); +#288937 = LINE('',#288938,#288939); +#288938 = CARTESIAN_POINT('',(141.1,-130.08,1.545)); +#288939 = VECTOR('',#288940,1.); +#288940 = DIRECTION('',(-2.089153893886E-03,-0.999997817716,0.)); +#288941 = ORIENTED_EDGE('',*,*,#288942,.F.); +#288942 = EDGE_CURVE('',#288943,#288935,#288945,.T.); +#288943 = VERTEX_POINT('',#288944); +#288944 = CARTESIAN_POINT('',(141.098079,-130.999509,1.51)); +#288945 = LINE('',#288946,#288947); +#288946 = CARTESIAN_POINT('',(141.098079,-130.999509,1.51)); +#288947 = VECTOR('',#288948,1.); +#288948 = DIRECTION('',(0.,0.,1.)); +#288949 = ORIENTED_EDGE('',*,*,#288950,.F.); +#288950 = EDGE_CURVE('',#288912,#288943,#288951,.T.); +#288951 = LINE('',#288952,#288953); +#288952 = CARTESIAN_POINT('',(141.1,-130.08,1.51)); +#288953 = VECTOR('',#288954,1.); +#288954 = DIRECTION('',(-2.089153893886E-03,-0.999997817716,0.)); +#288955 = PLANE('',#288956); +#288956 = AXIS2_PLACEMENT_3D('',#288957,#288958,#288959); +#288957 = CARTESIAN_POINT('',(141.1,-130.08,1.51)); +#288958 = DIRECTION('',(0.999997817716,-2.089153893886E-03,0.)); +#288959 = DIRECTION('',(-2.089153893886E-03,-0.999997817716,0.)); +#288960 = ADVANCED_FACE('',(#288961),#288986,.T.); +#288961 = FACE_BOUND('',#288962,.T.); +#288962 = EDGE_LOOP('',(#288963,#288964,#288972,#288980)); +#288963 = ORIENTED_EDGE('',*,*,#288942,.T.); +#288964 = ORIENTED_EDGE('',*,*,#288965,.T.); +#288965 = EDGE_CURVE('',#288935,#288966,#288968,.T.); +#288966 = VERTEX_POINT('',#288967); +#288967 = CARTESIAN_POINT('',(141.083147,-131.035557,1.545)); +#288968 = LINE('',#288969,#288970); +#288969 = CARTESIAN_POINT('',(141.098079,-130.999509,1.545)); +#288970 = VECTOR('',#288971,1.); +#288971 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#288972 = ORIENTED_EDGE('',*,*,#288973,.F.); +#288973 = EDGE_CURVE('',#288974,#288966,#288976,.T.); +#288974 = VERTEX_POINT('',#288975); +#288975 = CARTESIAN_POINT('',(141.083147,-131.035557,1.51)); +#288976 = LINE('',#288977,#288978); +#288977 = CARTESIAN_POINT('',(141.083147,-131.035557,1.51)); +#288978 = VECTOR('',#288979,1.); +#288979 = DIRECTION('',(0.,0.,1.)); +#288980 = ORIENTED_EDGE('',*,*,#288981,.F.); +#288981 = EDGE_CURVE('',#288943,#288974,#288982,.T.); +#288982 = LINE('',#288983,#288984); +#288983 = CARTESIAN_POINT('',(141.098079,-130.999509,1.51)); +#288984 = VECTOR('',#288985,1.); +#288985 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#288986 = PLANE('',#288987); +#288987 = AXIS2_PLACEMENT_3D('',#288988,#288989,#288990); +#288988 = CARTESIAN_POINT('',(141.098079,-130.999509,1.51)); +#288989 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#288990 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#288991 = ADVANCED_FACE('',(#288992),#289017,.T.); +#288992 = FACE_BOUND('',#288993,.T.); +#288993 = EDGE_LOOP('',(#288994,#288995,#289003,#289011)); +#288994 = ORIENTED_EDGE('',*,*,#288973,.T.); +#288995 = ORIENTED_EDGE('',*,*,#288996,.T.); +#288996 = EDGE_CURVE('',#288966,#288997,#288999,.T.); +#288997 = VERTEX_POINT('',#288998); +#288998 = CARTESIAN_POINT('',(140.175557,-131.943147,1.545)); +#288999 = LINE('',#289000,#289001); +#289000 = CARTESIAN_POINT('',(141.083147,-131.035557,1.545)); +#289001 = VECTOR('',#289002,1.); +#289002 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#289003 = ORIENTED_EDGE('',*,*,#289004,.F.); +#289004 = EDGE_CURVE('',#289005,#288997,#289007,.T.); +#289005 = VERTEX_POINT('',#289006); +#289006 = CARTESIAN_POINT('',(140.175557,-131.943147,1.51)); +#289007 = LINE('',#289008,#289009); +#289008 = CARTESIAN_POINT('',(140.175557,-131.943147,1.51)); +#289009 = VECTOR('',#289010,1.); +#289010 = DIRECTION('',(0.,0.,1.)); +#289011 = ORIENTED_EDGE('',*,*,#289012,.F.); +#289012 = EDGE_CURVE('',#288974,#289005,#289013,.T.); +#289013 = LINE('',#289014,#289015); +#289014 = CARTESIAN_POINT('',(141.083147,-131.035557,1.51)); +#289015 = VECTOR('',#289016,1.); +#289016 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#289017 = PLANE('',#289018); +#289018 = AXIS2_PLACEMENT_3D('',#289019,#289020,#289021); +#289019 = CARTESIAN_POINT('',(141.083147,-131.035557,1.51)); +#289020 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#289021 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#289022 = ADVANCED_FACE('',(#289023),#289048,.T.); +#289023 = FACE_BOUND('',#289024,.T.); +#289024 = EDGE_LOOP('',(#289025,#289026,#289034,#289042)); +#289025 = ORIENTED_EDGE('',*,*,#289004,.T.); +#289026 = ORIENTED_EDGE('',*,*,#289027,.T.); +#289027 = EDGE_CURVE('',#288997,#289028,#289030,.T.); +#289028 = VERTEX_POINT('',#289029); +#289029 = CARTESIAN_POINT('',(140.139509,-131.958079,1.545)); +#289030 = LINE('',#289031,#289032); +#289031 = CARTESIAN_POINT('',(140.175557,-131.943147,1.545)); +#289032 = VECTOR('',#289033,1.); +#289033 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#289034 = ORIENTED_EDGE('',*,*,#289035,.F.); +#289035 = EDGE_CURVE('',#289036,#289028,#289038,.T.); +#289036 = VERTEX_POINT('',#289037); +#289037 = CARTESIAN_POINT('',(140.139509,-131.958079,1.51)); +#289038 = LINE('',#289039,#289040); +#289039 = CARTESIAN_POINT('',(140.139509,-131.958079,1.51)); +#289040 = VECTOR('',#289041,1.); +#289041 = DIRECTION('',(0.,0.,1.)); +#289042 = ORIENTED_EDGE('',*,*,#289043,.F.); +#289043 = EDGE_CURVE('',#289005,#289036,#289044,.T.); +#289044 = LINE('',#289045,#289046); +#289045 = CARTESIAN_POINT('',(140.175557,-131.943147,1.51)); +#289046 = VECTOR('',#289047,1.); +#289047 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#289048 = PLANE('',#289049); +#289049 = AXIS2_PLACEMENT_3D('',#289050,#289051,#289052); +#289050 = CARTESIAN_POINT('',(140.175557,-131.943147,1.51)); +#289051 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#289052 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#289053 = ADVANCED_FACE('',(#289054),#289079,.T.); +#289054 = FACE_BOUND('',#289055,.T.); +#289055 = EDGE_LOOP('',(#289056,#289057,#289065,#289073)); +#289056 = ORIENTED_EDGE('',*,*,#289035,.T.); +#289057 = ORIENTED_EDGE('',*,*,#289058,.T.); +#289058 = EDGE_CURVE('',#289028,#289059,#289061,.T.); +#289059 = VERTEX_POINT('',#289060); +#289060 = CARTESIAN_POINT('',(134.840491,-131.958079,1.545)); +#289061 = LINE('',#289062,#289063); +#289062 = CARTESIAN_POINT('',(140.139509,-131.958079,1.545)); +#289063 = VECTOR('',#289064,1.); +#289064 = DIRECTION('',(-1.,0.,0.)); +#289065 = ORIENTED_EDGE('',*,*,#289066,.F.); +#289066 = EDGE_CURVE('',#289067,#289059,#289069,.T.); +#289067 = VERTEX_POINT('',#289068); +#289068 = CARTESIAN_POINT('',(134.840491,-131.958079,1.51)); +#289069 = LINE('',#289070,#289071); +#289070 = CARTESIAN_POINT('',(134.840491,-131.958079,1.51)); +#289071 = VECTOR('',#289072,1.); +#289072 = DIRECTION('',(0.,0.,1.)); +#289073 = ORIENTED_EDGE('',*,*,#289074,.F.); +#289074 = EDGE_CURVE('',#289036,#289067,#289075,.T.); +#289075 = LINE('',#289076,#289077); +#289076 = CARTESIAN_POINT('',(140.139509,-131.958079,1.51)); +#289077 = VECTOR('',#289078,1.); +#289078 = DIRECTION('',(-1.,0.,0.)); +#289079 = PLANE('',#289080); +#289080 = AXIS2_PLACEMENT_3D('',#289081,#289082,#289083); +#289081 = CARTESIAN_POINT('',(140.139509,-131.958079,1.51)); +#289082 = DIRECTION('',(0.,-1.,0.)); +#289083 = DIRECTION('',(-1.,0.,0.)); +#289084 = ADVANCED_FACE('',(#289085),#289110,.T.); +#289085 = FACE_BOUND('',#289086,.T.); +#289086 = EDGE_LOOP('',(#289087,#289088,#289096,#289104)); +#289087 = ORIENTED_EDGE('',*,*,#289066,.T.); +#289088 = ORIENTED_EDGE('',*,*,#289089,.T.); +#289089 = EDGE_CURVE('',#289059,#289090,#289092,.T.); +#289090 = VERTEX_POINT('',#289091); +#289091 = CARTESIAN_POINT('',(134.804442,-131.943147,1.545)); +#289092 = LINE('',#289093,#289094); +#289093 = CARTESIAN_POINT('',(134.840491,-131.958079,1.545)); +#289094 = VECTOR('',#289095,1.); +#289095 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#289096 = ORIENTED_EDGE('',*,*,#289097,.F.); +#289097 = EDGE_CURVE('',#289098,#289090,#289100,.T.); +#289098 = VERTEX_POINT('',#289099); +#289099 = CARTESIAN_POINT('',(134.804442,-131.943147,1.51)); +#289100 = LINE('',#289101,#289102); +#289101 = CARTESIAN_POINT('',(134.804442,-131.943147,1.51)); +#289102 = VECTOR('',#289103,1.); +#289103 = DIRECTION('',(0.,0.,1.)); +#289104 = ORIENTED_EDGE('',*,*,#289105,.F.); +#289105 = EDGE_CURVE('',#289067,#289098,#289106,.T.); +#289106 = LINE('',#289107,#289108); +#289107 = CARTESIAN_POINT('',(134.840491,-131.958079,1.51)); +#289108 = VECTOR('',#289109,1.); +#289109 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#289110 = PLANE('',#289111); +#289111 = AXIS2_PLACEMENT_3D('',#289112,#289113,#289114); +#289112 = CARTESIAN_POINT('',(134.840491,-131.958079,1.51)); +#289113 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#289114 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#289115 = ADVANCED_FACE('',(#289116),#289141,.T.); +#289116 = FACE_BOUND('',#289117,.T.); +#289117 = EDGE_LOOP('',(#289118,#289119,#289127,#289135)); +#289118 = ORIENTED_EDGE('',*,*,#289097,.T.); +#289119 = ORIENTED_EDGE('',*,*,#289120,.T.); +#289120 = EDGE_CURVE('',#289090,#289121,#289123,.T.); +#289121 = VERTEX_POINT('',#289122); +#289122 = CARTESIAN_POINT('',(134.208578,-131.35,1.545)); +#289123 = LINE('',#289124,#289125); +#289124 = CARTESIAN_POINT('',(134.804442,-131.943147,1.545)); +#289125 = VECTOR('',#289126,1.); +#289126 = DIRECTION('',(-0.708720735176,0.705489134949,0.)); +#289127 = ORIENTED_EDGE('',*,*,#289128,.F.); +#289128 = EDGE_CURVE('',#289129,#289121,#289131,.T.); +#289129 = VERTEX_POINT('',#289130); +#289130 = CARTESIAN_POINT('',(134.208578,-131.35,1.51)); +#289131 = LINE('',#289132,#289133); +#289132 = CARTESIAN_POINT('',(134.208578,-131.35,1.51)); +#289133 = VECTOR('',#289134,1.); +#289134 = DIRECTION('',(0.,0.,1.)); +#289135 = ORIENTED_EDGE('',*,*,#289136,.F.); +#289136 = EDGE_CURVE('',#289098,#289129,#289137,.T.); +#289137 = LINE('',#289138,#289139); +#289138 = CARTESIAN_POINT('',(134.804442,-131.943147,1.51)); +#289139 = VECTOR('',#289140,1.); +#289140 = DIRECTION('',(-0.708720735176,0.705489134949,0.)); +#289141 = PLANE('',#289142); +#289142 = AXIS2_PLACEMENT_3D('',#289143,#289144,#289145); +#289143 = CARTESIAN_POINT('',(134.804442,-131.943147,1.51)); +#289144 = DIRECTION('',(-0.705489134949,-0.708720735176,0.)); +#289145 = DIRECTION('',(-0.708720735176,0.705489134949,0.)); +#289146 = ADVANCED_FACE('',(#289147),#289172,.T.); +#289147 = FACE_BOUND('',#289148,.T.); +#289148 = EDGE_LOOP('',(#289149,#289150,#289158,#289166)); +#289149 = ORIENTED_EDGE('',*,*,#289128,.T.); +#289150 = ORIENTED_EDGE('',*,*,#289151,.T.); +#289151 = EDGE_CURVE('',#289121,#289152,#289154,.T.); +#289152 = VERTEX_POINT('',#289153); +#289153 = CARTESIAN_POINT('',(126.230491,-131.348079,1.545)); +#289154 = LINE('',#289155,#289156); +#289155 = CARTESIAN_POINT('',(134.208578,-131.35,1.545)); +#289156 = VECTOR('',#289157,1.); +#289157 = DIRECTION('',(-0.999999971011,2.407845319679E-04,0.)); +#289158 = ORIENTED_EDGE('',*,*,#289159,.F.); +#289159 = EDGE_CURVE('',#289160,#289152,#289162,.T.); +#289160 = VERTEX_POINT('',#289161); +#289161 = CARTESIAN_POINT('',(126.230491,-131.348079,1.51)); +#289162 = LINE('',#289163,#289164); +#289163 = CARTESIAN_POINT('',(126.230491,-131.348079,1.51)); +#289164 = VECTOR('',#289165,1.); +#289165 = DIRECTION('',(0.,0.,1.)); +#289166 = ORIENTED_EDGE('',*,*,#289167,.F.); +#289167 = EDGE_CURVE('',#289129,#289160,#289168,.T.); +#289168 = LINE('',#289169,#289170); +#289169 = CARTESIAN_POINT('',(134.208578,-131.35,1.51)); +#289170 = VECTOR('',#289171,1.); +#289171 = DIRECTION('',(-0.999999971011,2.407845319679E-04,0.)); +#289172 = PLANE('',#289173); +#289173 = AXIS2_PLACEMENT_3D('',#289174,#289175,#289176); +#289174 = CARTESIAN_POINT('',(134.208578,-131.35,1.51)); +#289175 = DIRECTION('',(-2.407845319679E-04,-0.999999971011,0.)); +#289176 = DIRECTION('',(-0.999999971011,2.407845319679E-04,0.)); +#289177 = ADVANCED_FACE('',(#289178),#289203,.T.); +#289178 = FACE_BOUND('',#289179,.T.); +#289179 = EDGE_LOOP('',(#289180,#289181,#289189,#289197)); +#289180 = ORIENTED_EDGE('',*,*,#289159,.T.); +#289181 = ORIENTED_EDGE('',*,*,#289182,.T.); +#289182 = EDGE_CURVE('',#289152,#289183,#289185,.T.); +#289183 = VERTEX_POINT('',#289184); +#289184 = CARTESIAN_POINT('',(126.194443,-131.333148,1.545)); +#289185 = LINE('',#289186,#289187); +#289186 = CARTESIAN_POINT('',(126.230491,-131.348079,1.545)); +#289187 = VECTOR('',#289188,1.); +#289188 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#289189 = ORIENTED_EDGE('',*,*,#289190,.F.); +#289190 = EDGE_CURVE('',#289191,#289183,#289193,.T.); +#289191 = VERTEX_POINT('',#289192); +#289192 = CARTESIAN_POINT('',(126.194443,-131.333148,1.51)); +#289193 = LINE('',#289194,#289195); +#289194 = CARTESIAN_POINT('',(126.194443,-131.333148,1.51)); +#289195 = VECTOR('',#289196,1.); +#289196 = DIRECTION('',(0.,0.,1.)); +#289197 = ORIENTED_EDGE('',*,*,#289198,.F.); +#289198 = EDGE_CURVE('',#289160,#289191,#289199,.T.); +#289199 = LINE('',#289200,#289201); +#289200 = CARTESIAN_POINT('',(126.230491,-131.348079,1.51)); +#289201 = VECTOR('',#289202,1.); +#289202 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#289203 = PLANE('',#289204); +#289204 = AXIS2_PLACEMENT_3D('',#289205,#289206,#289207); +#289205 = CARTESIAN_POINT('',(126.230491,-131.348079,1.51)); +#289206 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#289207 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#289208 = ADVANCED_FACE('',(#289209),#289234,.T.); +#289209 = FACE_BOUND('',#289210,.T.); +#289210 = EDGE_LOOP('',(#289211,#289212,#289220,#289228)); +#289211 = ORIENTED_EDGE('',*,*,#289190,.T.); +#289212 = ORIENTED_EDGE('',*,*,#289213,.T.); +#289213 = EDGE_CURVE('',#289183,#289214,#289216,.T.); +#289214 = VERTEX_POINT('',#289215); +#289215 = CARTESIAN_POINT('',(124.128078,-129.2695,1.545)); +#289216 = LINE('',#289217,#289218); +#289217 = CARTESIAN_POINT('',(126.194443,-131.333148,1.545)); +#289218 = VECTOR('',#289219,1.); +#289219 = DIRECTION('',(-0.707571810415,0.70664144593,0.)); +#289220 = ORIENTED_EDGE('',*,*,#289221,.F.); +#289221 = EDGE_CURVE('',#289222,#289214,#289224,.T.); +#289222 = VERTEX_POINT('',#289223); +#289223 = CARTESIAN_POINT('',(124.128078,-129.2695,1.51)); +#289224 = LINE('',#289225,#289226); +#289225 = CARTESIAN_POINT('',(124.128078,-129.2695,1.51)); +#289226 = VECTOR('',#289227,1.); +#289227 = DIRECTION('',(0.,0.,1.)); +#289228 = ORIENTED_EDGE('',*,*,#289229,.F.); +#289229 = EDGE_CURVE('',#289191,#289222,#289230,.T.); +#289230 = LINE('',#289231,#289232); +#289231 = CARTESIAN_POINT('',(126.194443,-131.333148,1.51)); +#289232 = VECTOR('',#289233,1.); +#289233 = DIRECTION('',(-0.707571810415,0.70664144593,0.)); +#289234 = PLANE('',#289235); +#289235 = AXIS2_PLACEMENT_3D('',#289236,#289237,#289238); +#289236 = CARTESIAN_POINT('',(126.194443,-131.333148,1.51)); +#289237 = DIRECTION('',(-0.70664144593,-0.707571810415,0.)); +#289238 = DIRECTION('',(-0.707571810415,0.70664144593,0.)); +#289239 = ADVANCED_FACE('',(#289240),#289265,.T.); +#289240 = FACE_BOUND('',#289241,.T.); +#289241 = EDGE_LOOP('',(#289242,#289243,#289251,#289259)); +#289242 = ORIENTED_EDGE('',*,*,#289221,.T.); +#289243 = ORIENTED_EDGE('',*,*,#289244,.T.); +#289244 = EDGE_CURVE('',#289214,#289245,#289247,.T.); +#289245 = VERTEX_POINT('',#289246); +#289246 = CARTESIAN_POINT('',(124.114805,-129.277164,1.545)); +#289247 = LINE('',#289248,#289249); +#289248 = CARTESIAN_POINT('',(124.128078,-129.2695,1.545)); +#289249 = VECTOR('',#289250,1.); +#289250 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#289251 = ORIENTED_EDGE('',*,*,#289252,.F.); +#289252 = EDGE_CURVE('',#289253,#289245,#289255,.T.); +#289253 = VERTEX_POINT('',#289254); +#289254 = CARTESIAN_POINT('',(124.114805,-129.277164,1.51)); +#289255 = LINE('',#289256,#289257); +#289256 = CARTESIAN_POINT('',(124.114805,-129.277164,1.51)); +#289257 = VECTOR('',#289258,1.); +#289258 = DIRECTION('',(0.,0.,1.)); +#289259 = ORIENTED_EDGE('',*,*,#289260,.F.); +#289260 = EDGE_CURVE('',#289222,#289253,#289261,.T.); +#289261 = LINE('',#289262,#289263); +#289262 = CARTESIAN_POINT('',(124.128078,-129.2695,1.51)); +#289263 = VECTOR('',#289264,1.); +#289264 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#289265 = PLANE('',#289266); +#289266 = AXIS2_PLACEMENT_3D('',#289267,#289268,#289269); +#289267 = CARTESIAN_POINT('',(124.128078,-129.2695,1.51)); +#289268 = DIRECTION('',(0.500040608684,-0.86600195708,0.)); +#289269 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#289270 = ADVANCED_FACE('',(#289271),#289298,.T.); +#289271 = FACE_BOUND('',#289272,.T.); +#289272 = EDGE_LOOP('',(#289273,#289274,#289283,#289291)); +#289273 = ORIENTED_EDGE('',*,*,#289252,.T.); +#289274 = ORIENTED_EDGE('',*,*,#289275,.T.); +#289275 = EDGE_CURVE('',#289245,#289276,#289278,.T.); +#289276 = VERTEX_POINT('',#289277); +#289277 = CARTESIAN_POINT('',(123.885195,-128.722836,1.545)); +#289278 = CIRCLE('',#289279,0.300000118202); +#289279 = AXIS2_PLACEMENT_3D('',#289280,#289281,#289282); +#289280 = CARTESIAN_POINT('',(124.,-129.,1.545)); +#289281 = DIRECTION('',(0.,0.,-1.)); +#289282 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#289283 = ORIENTED_EDGE('',*,*,#289284,.F.); +#289284 = EDGE_CURVE('',#289285,#289276,#289287,.T.); +#289285 = VERTEX_POINT('',#289286); +#289286 = CARTESIAN_POINT('',(123.885195,-128.722836,1.51)); +#289287 = LINE('',#289288,#289289); +#289288 = CARTESIAN_POINT('',(123.885195,-128.722836,1.51)); +#289289 = VECTOR('',#289290,1.); +#289290 = DIRECTION('',(0.,0.,1.)); +#289291 = ORIENTED_EDGE('',*,*,#289292,.F.); +#289292 = EDGE_CURVE('',#289253,#289285,#289293,.T.); +#289293 = CIRCLE('',#289294,0.300000118202); +#289294 = AXIS2_PLACEMENT_3D('',#289295,#289296,#289297); +#289295 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#289296 = DIRECTION('',(0.,0.,-1.)); +#289297 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#289298 = CYLINDRICAL_SURFACE('',#289299,0.300000118202); +#289299 = AXIS2_PLACEMENT_3D('',#289300,#289301,#289302); +#289300 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#289301 = DIRECTION('',(0.,0.,-1.)); +#289302 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#289303 = ADVANCED_FACE('',(#289304),#289329,.T.); +#289304 = FACE_BOUND('',#289305,.T.); +#289305 = EDGE_LOOP('',(#289306,#289307,#289315,#289323)); +#289306 = ORIENTED_EDGE('',*,*,#289284,.T.); +#289307 = ORIENTED_EDGE('',*,*,#289308,.T.); +#289308 = EDGE_CURVE('',#289276,#289309,#289311,.T.); +#289309 = VERTEX_POINT('',#289310); +#289310 = CARTESIAN_POINT('',(123.9,-128.718869,1.545)); +#289311 = LINE('',#289312,#289313); +#289312 = CARTESIAN_POINT('',(123.885195,-128.722836,1.545)); +#289313 = VECTOR('',#289314,1.); +#289314 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#289315 = ORIENTED_EDGE('',*,*,#289316,.F.); +#289316 = EDGE_CURVE('',#289317,#289309,#289319,.T.); +#289317 = VERTEX_POINT('',#289318); +#289318 = CARTESIAN_POINT('',(123.9,-128.718869,1.51)); +#289319 = LINE('',#289320,#289321); +#289320 = CARTESIAN_POINT('',(123.9,-128.718869,1.51)); +#289321 = VECTOR('',#289322,1.); +#289322 = DIRECTION('',(0.,0.,1.)); +#289323 = ORIENTED_EDGE('',*,*,#289324,.F.); +#289324 = EDGE_CURVE('',#289285,#289317,#289325,.T.); +#289325 = LINE('',#289326,#289327); +#289326 = CARTESIAN_POINT('',(123.885195,-128.722836,1.51)); +#289327 = VECTOR('',#289328,1.); +#289328 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#289329 = PLANE('',#289330); +#289330 = AXIS2_PLACEMENT_3D('',#289331,#289332,#289333); +#289331 = CARTESIAN_POINT('',(123.885195,-128.722836,1.51)); +#289332 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#289333 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#289334 = ADVANCED_FACE('',(#289335),#289360,.T.); +#289335 = FACE_BOUND('',#289336,.T.); +#289336 = EDGE_LOOP('',(#289337,#289338,#289346,#289354)); +#289337 = ORIENTED_EDGE('',*,*,#289316,.T.); +#289338 = ORIENTED_EDGE('',*,*,#289339,.T.); +#289339 = EDGE_CURVE('',#289309,#289340,#289342,.T.); +#289340 = VERTEX_POINT('',#289341); +#289341 = CARTESIAN_POINT('',(123.901219,-127.932743,1.545)); +#289342 = LINE('',#289343,#289344); +#289343 = CARTESIAN_POINT('',(123.9,-128.718869,1.545)); +#289344 = VECTOR('',#289345,1.); +#289345 = DIRECTION('',(1.550640144783E-03,0.999998797757,0.)); +#289346 = ORIENTED_EDGE('',*,*,#289347,.F.); +#289347 = EDGE_CURVE('',#289348,#289340,#289350,.T.); +#289348 = VERTEX_POINT('',#289349); +#289349 = CARTESIAN_POINT('',(123.901219,-127.932743,1.51)); +#289350 = LINE('',#289351,#289352); +#289351 = CARTESIAN_POINT('',(123.901219,-127.932743,1.51)); +#289352 = VECTOR('',#289353,1.); +#289353 = DIRECTION('',(0.,0.,1.)); +#289354 = ORIENTED_EDGE('',*,*,#289355,.F.); +#289355 = EDGE_CURVE('',#289317,#289348,#289356,.T.); +#289356 = LINE('',#289357,#289358); +#289357 = CARTESIAN_POINT('',(123.9,-128.718869,1.51)); +#289358 = VECTOR('',#289359,1.); +#289359 = DIRECTION('',(1.550640144783E-03,0.999998797757,0.)); +#289360 = PLANE('',#289361); +#289361 = AXIS2_PLACEMENT_3D('',#289362,#289363,#289364); +#289362 = CARTESIAN_POINT('',(123.9,-128.718869,1.51)); +#289363 = DIRECTION('',(-0.999998797757,1.550640144783E-03,0.)); +#289364 = DIRECTION('',(1.550640144783E-03,0.999998797757,0.)); +#289365 = ADVANCED_FACE('',(#289366),#289391,.T.); +#289366 = FACE_BOUND('',#289367,.T.); +#289367 = EDGE_LOOP('',(#289368,#289369,#289377,#289385)); +#289368 = ORIENTED_EDGE('',*,*,#289347,.T.); +#289369 = ORIENTED_EDGE('',*,*,#289370,.T.); +#289370 = EDGE_CURVE('',#289340,#289371,#289373,.T.); +#289371 = VERTEX_POINT('',#289372); +#289372 = CARTESIAN_POINT('',(123.942004,-127.943672,1.545)); +#289373 = LINE('',#289374,#289375); +#289374 = CARTESIAN_POINT('',(123.901219,-127.932743,1.545)); +#289375 = VECTOR('',#289376,1.); +#289376 = DIRECTION('',(0.965921727859,-0.258834340168,0.)); +#289377 = ORIENTED_EDGE('',*,*,#289378,.F.); +#289378 = EDGE_CURVE('',#289379,#289371,#289381,.T.); +#289379 = VERTEX_POINT('',#289380); +#289380 = CARTESIAN_POINT('',(123.942004,-127.943672,1.51)); +#289381 = LINE('',#289382,#289383); +#289382 = CARTESIAN_POINT('',(123.942004,-127.943672,1.51)); +#289383 = VECTOR('',#289384,1.); +#289384 = DIRECTION('',(0.,0.,1.)); +#289385 = ORIENTED_EDGE('',*,*,#289386,.F.); +#289386 = EDGE_CURVE('',#289348,#289379,#289387,.T.); +#289387 = LINE('',#289388,#289389); +#289388 = CARTESIAN_POINT('',(123.901219,-127.932743,1.51)); +#289389 = VECTOR('',#289390,1.); +#289390 = DIRECTION('',(0.965921727859,-0.258834340168,0.)); +#289391 = PLANE('',#289392); +#289392 = AXIS2_PLACEMENT_3D('',#289393,#289394,#289395); +#289393 = CARTESIAN_POINT('',(123.901219,-127.932743,1.51)); +#289394 = DIRECTION('',(0.258834340168,0.965921727859,-0.)); +#289395 = DIRECTION('',(0.965921727859,-0.258834340168,0.)); +#289396 = ADVANCED_FACE('',(#289397),#289413,.T.); +#289397 = FACE_BOUND('',#289398,.T.); +#289398 = EDGE_LOOP('',(#289399,#289400,#289406,#289407)); +#289399 = ORIENTED_EDGE('',*,*,#289378,.T.); +#289400 = ORIENTED_EDGE('',*,*,#289401,.T.); +#289401 = EDGE_CURVE('',#289371,#287927,#289402,.T.); +#289402 = LINE('',#289403,#289404); +#289403 = CARTESIAN_POINT('',(123.942004,-127.943672,1.545)); +#289404 = VECTOR('',#289405,1.); +#289405 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#289406 = ORIENTED_EDGE('',*,*,#287924,.F.); +#289407 = ORIENTED_EDGE('',*,*,#289408,.F.); +#289408 = EDGE_CURVE('',#289379,#287925,#289409,.T.); +#289409 = LINE('',#289410,#289411); +#289410 = CARTESIAN_POINT('',(123.942004,-127.943672,1.51)); +#289411 = VECTOR('',#289412,1.); +#289412 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#289413 = PLANE('',#289414); +#289414 = AXIS2_PLACEMENT_3D('',#289415,#289416,#289417); +#289415 = CARTESIAN_POINT('',(123.942004,-127.943672,1.51)); +#289416 = DIRECTION('',(6.539869768985E-02,0.997859213687,-0.)); +#289417 = DIRECTION('',(0.997859213687,-6.539869768985E-02,0.)); +#289418 = ADVANCED_FACE('',(#289419),#289446,.F.); +#289419 = FACE_BOUND('',#289420,.T.); +#289420 = EDGE_LOOP('',(#289421,#289431,#289438,#289439)); +#289421 = ORIENTED_EDGE('',*,*,#289422,.T.); +#289422 = EDGE_CURVE('',#289423,#289425,#289427,.T.); +#289423 = VERTEX_POINT('',#289424); +#289424 = CARTESIAN_POINT('',(124.137255,-129.,1.51)); +#289425 = VERTEX_POINT('',#289426); +#289426 = CARTESIAN_POINT('',(124.137255,-129.,1.545)); +#289427 = LINE('',#289428,#289429); +#289428 = CARTESIAN_POINT('',(124.137255,-129.,1.51)); +#289429 = VECTOR('',#289430,1.); +#289430 = DIRECTION('',(0.,0.,1.)); +#289431 = ORIENTED_EDGE('',*,*,#289432,.T.); +#289432 = EDGE_CURVE('',#289425,#289425,#289433,.T.); +#289433 = CIRCLE('',#289434,0.137255); +#289434 = AXIS2_PLACEMENT_3D('',#289435,#289436,#289437); +#289435 = CARTESIAN_POINT('',(124.,-129.,1.545)); +#289436 = DIRECTION('',(0.,0.,1.)); +#289437 = DIRECTION('',(1.,0.,-0.)); +#289438 = ORIENTED_EDGE('',*,*,#289422,.F.); +#289439 = ORIENTED_EDGE('',*,*,#289440,.F.); +#289440 = EDGE_CURVE('',#289423,#289423,#289441,.T.); +#289441 = CIRCLE('',#289442,0.137255); +#289442 = AXIS2_PLACEMENT_3D('',#289443,#289444,#289445); +#289443 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#289444 = DIRECTION('',(0.,0.,1.)); +#289445 = DIRECTION('',(1.,0.,-0.)); +#289446 = CYLINDRICAL_SURFACE('',#289447,0.137255); +#289447 = AXIS2_PLACEMENT_3D('',#289448,#289449,#289450); +#289448 = CARTESIAN_POINT('',(124.,-129.,1.51)); +#289449 = DIRECTION('',(-0.,-0.,-1.)); +#289450 = DIRECTION('',(1.,0.,-0.)); +#289451 = ADVANCED_FACE('',(#289452,#289502),#289505,.F.); +#289452 = FACE_BOUND('',#289453,.T.); +#289453 = EDGE_LOOP('',(#289454,#289455,#289456,#289457,#289458,#289459, + #289460,#289461,#289462,#289463,#289464,#289465,#289466,#289467, + #289468,#289469,#289470,#289471,#289472,#289473,#289474,#289475, + #289476,#289477,#289478,#289479,#289480,#289481,#289482,#289483, + #289484,#289485,#289486,#289487,#289488,#289489,#289490,#289491, + #289492,#289493,#289494,#289495,#289496,#289497,#289498,#289499, + #289500,#289501)); +#289454 = ORIENTED_EDGE('',*,*,#287950,.T.); +#289455 = ORIENTED_EDGE('',*,*,#287981,.T.); +#289456 = ORIENTED_EDGE('',*,*,#288012,.T.); +#289457 = ORIENTED_EDGE('',*,*,#288043,.T.); +#289458 = ORIENTED_EDGE('',*,*,#288075,.T.); +#289459 = ORIENTED_EDGE('',*,*,#288107,.T.); +#289460 = ORIENTED_EDGE('',*,*,#288138,.T.); +#289461 = ORIENTED_EDGE('',*,*,#288169,.T.); +#289462 = ORIENTED_EDGE('',*,*,#288200,.T.); +#289463 = ORIENTED_EDGE('',*,*,#288231,.T.); +#289464 = ORIENTED_EDGE('',*,*,#288262,.T.); +#289465 = ORIENTED_EDGE('',*,*,#288293,.T.); +#289466 = ORIENTED_EDGE('',*,*,#288324,.T.); +#289467 = ORIENTED_EDGE('',*,*,#288356,.T.); +#289468 = ORIENTED_EDGE('',*,*,#288388,.T.); +#289469 = ORIENTED_EDGE('',*,*,#288419,.T.); +#289470 = ORIENTED_EDGE('',*,*,#288450,.T.); +#289471 = ORIENTED_EDGE('',*,*,#288481,.T.); +#289472 = ORIENTED_EDGE('',*,*,#288513,.T.); +#289473 = ORIENTED_EDGE('',*,*,#288545,.T.); +#289474 = ORIENTED_EDGE('',*,*,#288576,.T.); +#289475 = ORIENTED_EDGE('',*,*,#288607,.T.); +#289476 = ORIENTED_EDGE('',*,*,#288638,.T.); +#289477 = ORIENTED_EDGE('',*,*,#288670,.T.); +#289478 = ORIENTED_EDGE('',*,*,#288702,.T.); +#289479 = ORIENTED_EDGE('',*,*,#288733,.T.); +#289480 = ORIENTED_EDGE('',*,*,#288764,.T.); +#289481 = ORIENTED_EDGE('',*,*,#288795,.T.); +#289482 = ORIENTED_EDGE('',*,*,#288826,.T.); +#289483 = ORIENTED_EDGE('',*,*,#288857,.T.); +#289484 = ORIENTED_EDGE('',*,*,#288888,.T.); +#289485 = ORIENTED_EDGE('',*,*,#288919,.T.); +#289486 = ORIENTED_EDGE('',*,*,#288950,.T.); +#289487 = ORIENTED_EDGE('',*,*,#288981,.T.); +#289488 = ORIENTED_EDGE('',*,*,#289012,.T.); +#289489 = ORIENTED_EDGE('',*,*,#289043,.T.); +#289490 = ORIENTED_EDGE('',*,*,#289074,.T.); +#289491 = ORIENTED_EDGE('',*,*,#289105,.T.); +#289492 = ORIENTED_EDGE('',*,*,#289136,.T.); +#289493 = ORIENTED_EDGE('',*,*,#289167,.T.); +#289494 = ORIENTED_EDGE('',*,*,#289198,.T.); +#289495 = ORIENTED_EDGE('',*,*,#289229,.T.); +#289496 = ORIENTED_EDGE('',*,*,#289260,.T.); +#289497 = ORIENTED_EDGE('',*,*,#289292,.T.); +#289498 = ORIENTED_EDGE('',*,*,#289324,.T.); +#289499 = ORIENTED_EDGE('',*,*,#289355,.T.); +#289500 = ORIENTED_EDGE('',*,*,#289386,.T.); +#289501 = ORIENTED_EDGE('',*,*,#289408,.T.); +#289502 = FACE_BOUND('',#289503,.T.); +#289503 = EDGE_LOOP('',(#289504)); +#289504 = ORIENTED_EDGE('',*,*,#289440,.T.); +#289505 = PLANE('',#289506); +#289506 = AXIS2_PLACEMENT_3D('',#289507,#289508,#289509); +#289507 = CARTESIAN_POINT('',(0.,0.,1.51)); +#289508 = DIRECTION('',(0.,0.,1.)); +#289509 = DIRECTION('',(1.,0.,-0.)); +#289510 = ADVANCED_FACE('',(#289511,#289561),#289564,.T.); +#289511 = FACE_BOUND('',#289512,.F.); +#289512 = EDGE_LOOP('',(#289513,#289514,#289515,#289516,#289517,#289518, + #289519,#289520,#289521,#289522,#289523,#289524,#289525,#289526, + #289527,#289528,#289529,#289530,#289531,#289532,#289533,#289534, + #289535,#289536,#289537,#289538,#289539,#289540,#289541,#289542, + #289543,#289544,#289545,#289546,#289547,#289548,#289549,#289550, + #289551,#289552,#289553,#289554,#289555,#289556,#289557,#289558, + #289559,#289560)); +#289513 = ORIENTED_EDGE('',*,*,#287934,.T.); +#289514 = ORIENTED_EDGE('',*,*,#287965,.T.); +#289515 = ORIENTED_EDGE('',*,*,#287996,.T.); +#289516 = ORIENTED_EDGE('',*,*,#288027,.T.); +#289517 = ORIENTED_EDGE('',*,*,#288058,.T.); +#289518 = ORIENTED_EDGE('',*,*,#288091,.T.); +#289519 = ORIENTED_EDGE('',*,*,#288122,.T.); +#289520 = ORIENTED_EDGE('',*,*,#288153,.T.); +#289521 = ORIENTED_EDGE('',*,*,#288184,.T.); +#289522 = ORIENTED_EDGE('',*,*,#288215,.T.); +#289523 = ORIENTED_EDGE('',*,*,#288246,.T.); +#289524 = ORIENTED_EDGE('',*,*,#288277,.T.); +#289525 = ORIENTED_EDGE('',*,*,#288308,.T.); +#289526 = ORIENTED_EDGE('',*,*,#288339,.T.); +#289527 = ORIENTED_EDGE('',*,*,#288372,.T.); +#289528 = ORIENTED_EDGE('',*,*,#288403,.T.); +#289529 = ORIENTED_EDGE('',*,*,#288434,.T.); +#289530 = ORIENTED_EDGE('',*,*,#288465,.T.); +#289531 = ORIENTED_EDGE('',*,*,#288496,.T.); +#289532 = ORIENTED_EDGE('',*,*,#288529,.T.); +#289533 = ORIENTED_EDGE('',*,*,#288560,.T.); +#289534 = ORIENTED_EDGE('',*,*,#288591,.T.); +#289535 = ORIENTED_EDGE('',*,*,#288622,.T.); +#289536 = ORIENTED_EDGE('',*,*,#288653,.T.); +#289537 = ORIENTED_EDGE('',*,*,#288686,.T.); +#289538 = ORIENTED_EDGE('',*,*,#288717,.T.); +#289539 = ORIENTED_EDGE('',*,*,#288748,.T.); +#289540 = ORIENTED_EDGE('',*,*,#288779,.T.); +#289541 = ORIENTED_EDGE('',*,*,#288810,.T.); +#289542 = ORIENTED_EDGE('',*,*,#288841,.T.); +#289543 = ORIENTED_EDGE('',*,*,#288872,.T.); +#289544 = ORIENTED_EDGE('',*,*,#288903,.T.); +#289545 = ORIENTED_EDGE('',*,*,#288934,.T.); +#289546 = ORIENTED_EDGE('',*,*,#288965,.T.); +#289547 = ORIENTED_EDGE('',*,*,#288996,.T.); +#289548 = ORIENTED_EDGE('',*,*,#289027,.T.); +#289549 = ORIENTED_EDGE('',*,*,#289058,.T.); +#289550 = ORIENTED_EDGE('',*,*,#289089,.T.); +#289551 = ORIENTED_EDGE('',*,*,#289120,.T.); +#289552 = ORIENTED_EDGE('',*,*,#289151,.T.); +#289553 = ORIENTED_EDGE('',*,*,#289182,.T.); +#289554 = ORIENTED_EDGE('',*,*,#289213,.T.); +#289555 = ORIENTED_EDGE('',*,*,#289244,.T.); +#289556 = ORIENTED_EDGE('',*,*,#289275,.T.); +#289557 = ORIENTED_EDGE('',*,*,#289308,.T.); +#289558 = ORIENTED_EDGE('',*,*,#289339,.T.); +#289559 = ORIENTED_EDGE('',*,*,#289370,.T.); +#289560 = ORIENTED_EDGE('',*,*,#289401,.T.); +#289561 = FACE_BOUND('',#289562,.F.); +#289562 = EDGE_LOOP('',(#289563)); +#289563 = ORIENTED_EDGE('',*,*,#289432,.T.); +#289564 = PLANE('',#289565); +#289565 = AXIS2_PLACEMENT_3D('',#289566,#289567,#289568); +#289566 = CARTESIAN_POINT('',(0.,0.,1.545)); +#289567 = DIRECTION('',(0.,0.,1.)); +#289568 = DIRECTION('',(1.,0.,-0.)); +#289569 = MANIFOLD_SOLID_BREP('',#289570); +#289570 = CLOSED_SHELL('',(#289571,#289604,#289637,#289649)); +#289571 = ADVANCED_FACE('',(#289572),#289599,.T.); +#289572 = FACE_BOUND('',#289573,.F.); +#289573 = EDGE_LOOP('',(#289574,#289584,#289591,#289592)); +#289574 = ORIENTED_EDGE('',*,*,#289575,.T.); +#289575 = EDGE_CURVE('',#289576,#289578,#289580,.T.); +#289576 = VERTEX_POINT('',#289577); +#289577 = CARTESIAN_POINT('',(123.8,-124.,1.51)); +#289578 = VERTEX_POINT('',#289579); +#289579 = CARTESIAN_POINT('',(123.8,-124.,1.545)); +#289580 = LINE('',#289581,#289582); +#289581 = CARTESIAN_POINT('',(123.8,-124.,1.51)); +#289582 = VECTOR('',#289583,1.); +#289583 = DIRECTION('',(0.,0.,1.)); +#289584 = ORIENTED_EDGE('',*,*,#289585,.T.); +#289585 = EDGE_CURVE('',#289578,#289578,#289586,.T.); +#289586 = CIRCLE('',#289587,0.3); +#289587 = AXIS2_PLACEMENT_3D('',#289588,#289589,#289590); +#289588 = CARTESIAN_POINT('',(123.5,-124.,1.545)); +#289589 = DIRECTION('',(0.,0.,1.)); +#289590 = DIRECTION('',(1.,0.,-0.)); +#289591 = ORIENTED_EDGE('',*,*,#289575,.F.); +#289592 = ORIENTED_EDGE('',*,*,#289593,.F.); +#289593 = EDGE_CURVE('',#289576,#289576,#289594,.T.); +#289594 = CIRCLE('',#289595,0.3); +#289595 = AXIS2_PLACEMENT_3D('',#289596,#289597,#289598); +#289596 = CARTESIAN_POINT('',(123.5,-124.,1.51)); +#289597 = DIRECTION('',(0.,0.,1.)); +#289598 = DIRECTION('',(1.,0.,-0.)); +#289599 = CYLINDRICAL_SURFACE('',#289600,0.3); +#289600 = AXIS2_PLACEMENT_3D('',#289601,#289602,#289603); +#289601 = CARTESIAN_POINT('',(123.5,-124.,1.51)); +#289602 = DIRECTION('',(-0.,-0.,-1.)); +#289603 = DIRECTION('',(1.,0.,-0.)); +#289604 = ADVANCED_FACE('',(#289605),#289632,.F.); +#289605 = FACE_BOUND('',#289606,.T.); +#289606 = EDGE_LOOP('',(#289607,#289617,#289624,#289625)); +#289607 = ORIENTED_EDGE('',*,*,#289608,.T.); +#289608 = EDGE_CURVE('',#289609,#289611,#289613,.T.); +#289609 = VERTEX_POINT('',#289610); +#289610 = CARTESIAN_POINT('',(123.637255,-124.,1.51)); +#289611 = VERTEX_POINT('',#289612); +#289612 = CARTESIAN_POINT('',(123.637255,-124.,1.545)); +#289613 = LINE('',#289614,#289615); +#289614 = CARTESIAN_POINT('',(123.637255,-124.,1.51)); +#289615 = VECTOR('',#289616,1.); +#289616 = DIRECTION('',(0.,0.,1.)); +#289617 = ORIENTED_EDGE('',*,*,#289618,.T.); +#289618 = EDGE_CURVE('',#289611,#289611,#289619,.T.); +#289619 = CIRCLE('',#289620,0.137255); +#289620 = AXIS2_PLACEMENT_3D('',#289621,#289622,#289623); +#289621 = CARTESIAN_POINT('',(123.5,-124.,1.545)); +#289622 = DIRECTION('',(0.,0.,1.)); +#289623 = DIRECTION('',(1.,0.,-0.)); +#289624 = ORIENTED_EDGE('',*,*,#289608,.F.); +#289625 = ORIENTED_EDGE('',*,*,#289626,.F.); +#289626 = EDGE_CURVE('',#289609,#289609,#289627,.T.); +#289627 = CIRCLE('',#289628,0.137255); +#289628 = AXIS2_PLACEMENT_3D('',#289629,#289630,#289631); +#289629 = CARTESIAN_POINT('',(123.5,-124.,1.51)); +#289630 = DIRECTION('',(0.,0.,1.)); +#289631 = DIRECTION('',(1.,0.,-0.)); +#289632 = CYLINDRICAL_SURFACE('',#289633,0.137255); +#289633 = AXIS2_PLACEMENT_3D('',#289634,#289635,#289636); +#289634 = CARTESIAN_POINT('',(123.5,-124.,1.51)); +#289635 = DIRECTION('',(-0.,-0.,-1.)); +#289636 = DIRECTION('',(1.,0.,-0.)); +#289637 = ADVANCED_FACE('',(#289638,#289641),#289644,.F.); +#289638 = FACE_BOUND('',#289639,.F.); +#289639 = EDGE_LOOP('',(#289640)); +#289640 = ORIENTED_EDGE('',*,*,#289593,.T.); +#289641 = FACE_BOUND('',#289642,.T.); +#289642 = EDGE_LOOP('',(#289643)); +#289643 = ORIENTED_EDGE('',*,*,#289626,.T.); +#289644 = PLANE('',#289645); +#289645 = AXIS2_PLACEMENT_3D('',#289646,#289647,#289648); +#289646 = CARTESIAN_POINT('',(0.,0.,1.51)); +#289647 = DIRECTION('',(0.,0.,1.)); +#289648 = DIRECTION('',(1.,0.,-0.)); +#289649 = ADVANCED_FACE('',(#289650,#289653),#289656,.T.); +#289650 = FACE_BOUND('',#289651,.T.); +#289651 = EDGE_LOOP('',(#289652)); +#289652 = ORIENTED_EDGE('',*,*,#289585,.T.); +#289653 = FACE_BOUND('',#289654,.F.); +#289654 = EDGE_LOOP('',(#289655)); +#289655 = ORIENTED_EDGE('',*,*,#289618,.T.); +#289656 = PLANE('',#289657); +#289657 = AXIS2_PLACEMENT_3D('',#289658,#289659,#289660); +#289658 = CARTESIAN_POINT('',(0.,0.,1.545)); +#289659 = DIRECTION('',(0.,0.,1.)); +#289660 = DIRECTION('',(1.,0.,-0.)); +#289661 = MANIFOLD_SOLID_BREP('',#289662); +#289662 = CLOSED_SHELL('',(#289663,#289696,#289729,#289741)); +#289663 = ADVANCED_FACE('',(#289664),#289691,.T.); +#289664 = FACE_BOUND('',#289665,.F.); +#289665 = EDGE_LOOP('',(#289666,#289676,#289683,#289684)); +#289666 = ORIENTED_EDGE('',*,*,#289667,.T.); +#289667 = EDGE_CURVE('',#289668,#289670,#289672,.T.); +#289668 = VERTEX_POINT('',#289669); +#289669 = CARTESIAN_POINT('',(145.3,-123.5,1.51)); +#289670 = VERTEX_POINT('',#289671); +#289671 = CARTESIAN_POINT('',(145.3,-123.5,1.545)); +#289672 = LINE('',#289673,#289674); +#289673 = CARTESIAN_POINT('',(145.3,-123.5,1.51)); +#289674 = VECTOR('',#289675,1.); +#289675 = DIRECTION('',(0.,0.,1.)); +#289676 = ORIENTED_EDGE('',*,*,#289677,.T.); +#289677 = EDGE_CURVE('',#289670,#289670,#289678,.T.); +#289678 = CIRCLE('',#289679,0.3); +#289679 = AXIS2_PLACEMENT_3D('',#289680,#289681,#289682); +#289680 = CARTESIAN_POINT('',(145.,-123.5,1.545)); +#289681 = DIRECTION('',(0.,0.,1.)); +#289682 = DIRECTION('',(1.,0.,-0.)); +#289683 = ORIENTED_EDGE('',*,*,#289667,.F.); +#289684 = ORIENTED_EDGE('',*,*,#289685,.F.); +#289685 = EDGE_CURVE('',#289668,#289668,#289686,.T.); +#289686 = CIRCLE('',#289687,0.3); +#289687 = AXIS2_PLACEMENT_3D('',#289688,#289689,#289690); +#289688 = CARTESIAN_POINT('',(145.,-123.5,1.51)); +#289689 = DIRECTION('',(0.,0.,1.)); +#289690 = DIRECTION('',(1.,0.,-0.)); +#289691 = CYLINDRICAL_SURFACE('',#289692,0.3); +#289692 = AXIS2_PLACEMENT_3D('',#289693,#289694,#289695); +#289693 = CARTESIAN_POINT('',(145.,-123.5,1.51)); +#289694 = DIRECTION('',(-0.,-0.,-1.)); +#289695 = DIRECTION('',(1.,0.,-0.)); +#289696 = ADVANCED_FACE('',(#289697),#289724,.F.); +#289697 = FACE_BOUND('',#289698,.T.); +#289698 = EDGE_LOOP('',(#289699,#289709,#289716,#289717)); +#289699 = ORIENTED_EDGE('',*,*,#289700,.T.); +#289700 = EDGE_CURVE('',#289701,#289703,#289705,.T.); +#289701 = VERTEX_POINT('',#289702); +#289702 = CARTESIAN_POINT('',(145.137255,-123.5,1.51)); +#289703 = VERTEX_POINT('',#289704); +#289704 = CARTESIAN_POINT('',(145.137255,-123.5,1.545)); +#289705 = LINE('',#289706,#289707); +#289706 = CARTESIAN_POINT('',(145.137255,-123.5,1.51)); +#289707 = VECTOR('',#289708,1.); +#289708 = DIRECTION('',(0.,0.,1.)); +#289709 = ORIENTED_EDGE('',*,*,#289710,.T.); +#289710 = EDGE_CURVE('',#289703,#289703,#289711,.T.); +#289711 = CIRCLE('',#289712,0.137255); +#289712 = AXIS2_PLACEMENT_3D('',#289713,#289714,#289715); +#289713 = CARTESIAN_POINT('',(145.,-123.5,1.545)); +#289714 = DIRECTION('',(0.,0.,1.)); +#289715 = DIRECTION('',(1.,0.,-0.)); +#289716 = ORIENTED_EDGE('',*,*,#289700,.F.); +#289717 = ORIENTED_EDGE('',*,*,#289718,.F.); +#289718 = EDGE_CURVE('',#289701,#289701,#289719,.T.); +#289719 = CIRCLE('',#289720,0.137255); +#289720 = AXIS2_PLACEMENT_3D('',#289721,#289722,#289723); +#289721 = CARTESIAN_POINT('',(145.,-123.5,1.51)); +#289722 = DIRECTION('',(0.,0.,1.)); +#289723 = DIRECTION('',(1.,0.,-0.)); +#289724 = CYLINDRICAL_SURFACE('',#289725,0.137255); +#289725 = AXIS2_PLACEMENT_3D('',#289726,#289727,#289728); +#289726 = CARTESIAN_POINT('',(145.,-123.5,1.51)); +#289727 = DIRECTION('',(-0.,-0.,-1.)); +#289728 = DIRECTION('',(1.,0.,-0.)); +#289729 = ADVANCED_FACE('',(#289730,#289733),#289736,.F.); +#289730 = FACE_BOUND('',#289731,.F.); +#289731 = EDGE_LOOP('',(#289732)); +#289732 = ORIENTED_EDGE('',*,*,#289685,.T.); +#289733 = FACE_BOUND('',#289734,.T.); +#289734 = EDGE_LOOP('',(#289735)); +#289735 = ORIENTED_EDGE('',*,*,#289718,.T.); +#289736 = PLANE('',#289737); +#289737 = AXIS2_PLACEMENT_3D('',#289738,#289739,#289740); +#289738 = CARTESIAN_POINT('',(0.,0.,1.51)); +#289739 = DIRECTION('',(0.,0.,1.)); +#289740 = DIRECTION('',(1.,0.,-0.)); +#289741 = ADVANCED_FACE('',(#289742,#289745),#289748,.T.); +#289742 = FACE_BOUND('',#289743,.T.); +#289743 = EDGE_LOOP('',(#289744)); +#289744 = ORIENTED_EDGE('',*,*,#289677,.T.); +#289745 = FACE_BOUND('',#289746,.F.); +#289746 = EDGE_LOOP('',(#289747)); +#289747 = ORIENTED_EDGE('',*,*,#289710,.T.); +#289748 = PLANE('',#289749); +#289749 = AXIS2_PLACEMENT_3D('',#289750,#289751,#289752); +#289750 = CARTESIAN_POINT('',(0.,0.,1.545)); +#289751 = DIRECTION('',(0.,0.,1.)); +#289752 = DIRECTION('',(1.,0.,-0.)); +#289753 = MANIFOLD_SOLID_BREP('',#289754); +#289754 = CLOSED_SHELL('',(#289755,#289795,#289828,#289859,#289890, + #289923,#289945,#289978,#289995)); +#289755 = ADVANCED_FACE('',(#289756),#289790,.T.); +#289756 = FACE_BOUND('',#289757,.T.); +#289757 = EDGE_LOOP('',(#289758,#289768,#289776,#289784)); +#289758 = ORIENTED_EDGE('',*,*,#289759,.T.); +#289759 = EDGE_CURVE('',#289760,#289762,#289764,.T.); +#289760 = VERTEX_POINT('',#289761); +#289761 = CARTESIAN_POINT('',(129.031131,-121.15,1.51)); +#289762 = VERTEX_POINT('',#289763); +#289763 = CARTESIAN_POINT('',(129.031131,-121.15,1.545)); +#289764 = LINE('',#289765,#289766); +#289765 = CARTESIAN_POINT('',(129.031131,-121.15,1.51)); +#289766 = VECTOR('',#289767,1.); +#289767 = DIRECTION('',(0.,0.,1.)); +#289768 = ORIENTED_EDGE('',*,*,#289769,.T.); +#289769 = EDGE_CURVE('',#289762,#289770,#289772,.T.); +#289770 = VERTEX_POINT('',#289771); +#289771 = CARTESIAN_POINT('',(130.269509,-121.151921,1.545)); +#289772 = LINE('',#289773,#289774); +#289773 = CARTESIAN_POINT('',(129.031131,-121.15,1.545)); +#289774 = VECTOR('',#289775,1.); +#289775 = DIRECTION('',(0.999998796856,-1.551220781342E-03,0.)); +#289776 = ORIENTED_EDGE('',*,*,#289777,.F.); +#289777 = EDGE_CURVE('',#289778,#289770,#289780,.T.); +#289778 = VERTEX_POINT('',#289779); +#289779 = CARTESIAN_POINT('',(130.269509,-121.151921,1.51)); +#289780 = LINE('',#289781,#289782); +#289781 = CARTESIAN_POINT('',(130.269509,-121.151921,1.51)); +#289782 = VECTOR('',#289783,1.); +#289783 = DIRECTION('',(0.,0.,1.)); +#289784 = ORIENTED_EDGE('',*,*,#289785,.F.); +#289785 = EDGE_CURVE('',#289760,#289778,#289786,.T.); +#289786 = LINE('',#289787,#289788); +#289787 = CARTESIAN_POINT('',(129.031131,-121.15,1.51)); +#289788 = VECTOR('',#289789,1.); +#289789 = DIRECTION('',(0.999998796856,-1.551220781342E-03,0.)); +#289790 = PLANE('',#289791); +#289791 = AXIS2_PLACEMENT_3D('',#289792,#289793,#289794); +#289792 = CARTESIAN_POINT('',(129.031131,-121.15,1.51)); +#289793 = DIRECTION('',(1.551220781342E-03,0.999998796856,-0.)); +#289794 = DIRECTION('',(0.999998796856,-1.551220781342E-03,0.)); +#289795 = ADVANCED_FACE('',(#289796),#289823,.T.); +#289796 = FACE_BOUND('',#289797,.T.); +#289797 = EDGE_LOOP('',(#289798,#289799,#289808,#289816)); +#289798 = ORIENTED_EDGE('',*,*,#289777,.T.); +#289799 = ORIENTED_EDGE('',*,*,#289800,.T.); +#289800 = EDGE_CURVE('',#289770,#289801,#289803,.T.); +#289801 = VERTEX_POINT('',#289802); +#289802 = CARTESIAN_POINT('',(130.269509,-121.348079,1.545)); +#289803 = CIRCLE('',#289804,0.100000456609); +#289804 = AXIS2_PLACEMENT_3D('',#289805,#289806,#289807); +#289805 = CARTESIAN_POINT('',(130.25,-121.25,1.545)); +#289806 = DIRECTION('',(0.,0.,-1.)); +#289807 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#289808 = ORIENTED_EDGE('',*,*,#289809,.F.); +#289809 = EDGE_CURVE('',#289810,#289801,#289812,.T.); +#289810 = VERTEX_POINT('',#289811); +#289811 = CARTESIAN_POINT('',(130.269509,-121.348079,1.51)); +#289812 = LINE('',#289813,#289814); +#289813 = CARTESIAN_POINT('',(130.269509,-121.348079,1.51)); +#289814 = VECTOR('',#289815,1.); +#289815 = DIRECTION('',(0.,0.,1.)); +#289816 = ORIENTED_EDGE('',*,*,#289817,.F.); +#289817 = EDGE_CURVE('',#289778,#289810,#289818,.T.); +#289818 = CIRCLE('',#289819,0.100000456609); +#289819 = AXIS2_PLACEMENT_3D('',#289820,#289821,#289822); +#289820 = CARTESIAN_POINT('',(130.25,-121.25,1.51)); +#289821 = DIRECTION('',(0.,0.,-1.)); +#289822 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#289823 = CYLINDRICAL_SURFACE('',#289824,0.100000456609); +#289824 = AXIS2_PLACEMENT_3D('',#289825,#289826,#289827); +#289825 = CARTESIAN_POINT('',(130.25,-121.25,1.51)); +#289826 = DIRECTION('',(0.,0.,-1.)); +#289827 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#289828 = ADVANCED_FACE('',(#289829),#289854,.T.); +#289829 = FACE_BOUND('',#289830,.T.); +#289830 = EDGE_LOOP('',(#289831,#289832,#289840,#289848)); +#289831 = ORIENTED_EDGE('',*,*,#289809,.T.); +#289832 = ORIENTED_EDGE('',*,*,#289833,.T.); +#289833 = EDGE_CURVE('',#289801,#289834,#289836,.T.); +#289834 = VERTEX_POINT('',#289835); +#289835 = CARTESIAN_POINT('',(129.031131,-121.35,1.545)); +#289836 = LINE('',#289837,#289838); +#289837 = CARTESIAN_POINT('',(130.269509,-121.348079,1.545)); +#289838 = VECTOR('',#289839,1.); +#289839 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#289840 = ORIENTED_EDGE('',*,*,#289841,.F.); +#289841 = EDGE_CURVE('',#289842,#289834,#289844,.T.); +#289842 = VERTEX_POINT('',#289843); +#289843 = CARTESIAN_POINT('',(129.031131,-121.35,1.51)); +#289844 = LINE('',#289845,#289846); +#289845 = CARTESIAN_POINT('',(129.031131,-121.35,1.51)); +#289846 = VECTOR('',#289847,1.); +#289847 = DIRECTION('',(0.,0.,1.)); +#289848 = ORIENTED_EDGE('',*,*,#289849,.F.); +#289849 = EDGE_CURVE('',#289810,#289842,#289850,.T.); +#289850 = LINE('',#289851,#289852); +#289851 = CARTESIAN_POINT('',(130.269509,-121.348079,1.51)); +#289852 = VECTOR('',#289853,1.); +#289853 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#289854 = PLANE('',#289855); +#289855 = AXIS2_PLACEMENT_3D('',#289856,#289857,#289858); +#289856 = CARTESIAN_POINT('',(130.269509,-121.348079,1.51)); +#289857 = DIRECTION('',(1.551220781342E-03,-0.999998796856,0.)); +#289858 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#289859 = ADVANCED_FACE('',(#289860),#289885,.T.); +#289860 = FACE_BOUND('',#289861,.T.); +#289861 = EDGE_LOOP('',(#289862,#289863,#289871,#289879)); +#289862 = ORIENTED_EDGE('',*,*,#289841,.T.); +#289863 = ORIENTED_EDGE('',*,*,#289864,.T.); +#289864 = EDGE_CURVE('',#289834,#289865,#289867,.T.); +#289865 = VERTEX_POINT('',#289866); +#289866 = CARTESIAN_POINT('',(129.027164,-121.364805,1.545)); +#289867 = LINE('',#289868,#289869); +#289868 = CARTESIAN_POINT('',(129.031131,-121.35,1.545)); +#289869 = VECTOR('',#289870,1.); +#289870 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#289871 = ORIENTED_EDGE('',*,*,#289872,.F.); +#289872 = EDGE_CURVE('',#289873,#289865,#289875,.T.); +#289873 = VERTEX_POINT('',#289874); +#289874 = CARTESIAN_POINT('',(129.027164,-121.364805,1.51)); +#289875 = LINE('',#289876,#289877); +#289876 = CARTESIAN_POINT('',(129.027164,-121.364805,1.51)); +#289877 = VECTOR('',#289878,1.); +#289878 = DIRECTION('',(0.,0.,1.)); +#289879 = ORIENTED_EDGE('',*,*,#289880,.F.); +#289880 = EDGE_CURVE('',#289842,#289873,#289881,.T.); +#289881 = LINE('',#289882,#289883); +#289882 = CARTESIAN_POINT('',(129.031131,-121.35,1.51)); +#289883 = VECTOR('',#289884,1.); +#289884 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#289885 = PLANE('',#289886); +#289886 = AXIS2_PLACEMENT_3D('',#289887,#289888,#289889); +#289887 = CARTESIAN_POINT('',(129.031131,-121.35,1.51)); +#289888 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#289889 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#289890 = ADVANCED_FACE('',(#289891),#289918,.T.); +#289891 = FACE_BOUND('',#289892,.T.); +#289892 = EDGE_LOOP('',(#289893,#289894,#289903,#289911)); +#289893 = ORIENTED_EDGE('',*,*,#289872,.T.); +#289894 = ORIENTED_EDGE('',*,*,#289895,.T.); +#289895 = EDGE_CURVE('',#289865,#289896,#289898,.T.); +#289896 = VERTEX_POINT('',#289897); +#289897 = CARTESIAN_POINT('',(129.027164,-121.135195,1.545)); +#289898 = CIRCLE('',#289899,0.299999888633); +#289899 = AXIS2_PLACEMENT_3D('',#289900,#289901,#289902); +#289900 = CARTESIAN_POINT('',(128.75000024848,-121.25,1.545)); +#289901 = DIRECTION('',(-0.,0.,-1.)); +#289902 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#289903 = ORIENTED_EDGE('',*,*,#289904,.F.); +#289904 = EDGE_CURVE('',#289905,#289896,#289907,.T.); +#289905 = VERTEX_POINT('',#289906); +#289906 = CARTESIAN_POINT('',(129.027164,-121.135195,1.51)); +#289907 = LINE('',#289908,#289909); +#289908 = CARTESIAN_POINT('',(129.027164,-121.135195,1.51)); +#289909 = VECTOR('',#289910,1.); +#289910 = DIRECTION('',(0.,0.,1.)); +#289911 = ORIENTED_EDGE('',*,*,#289912,.F.); +#289912 = EDGE_CURVE('',#289873,#289905,#289913,.T.); +#289913 = CIRCLE('',#289914,0.299999888633); +#289914 = AXIS2_PLACEMENT_3D('',#289915,#289916,#289917); +#289915 = CARTESIAN_POINT('',(128.75000024848,-121.25,1.51)); +#289916 = DIRECTION('',(-0.,0.,-1.)); +#289917 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#289918 = CYLINDRICAL_SURFACE('',#289919,0.299999888633); +#289919 = AXIS2_PLACEMENT_3D('',#289920,#289921,#289922); +#289920 = CARTESIAN_POINT('',(128.75000024848,-121.25,1.51)); +#289921 = DIRECTION('',(-0.,0.,-1.)); +#289922 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#289923 = ADVANCED_FACE('',(#289924),#289940,.T.); +#289924 = FACE_BOUND('',#289925,.T.); +#289925 = EDGE_LOOP('',(#289926,#289927,#289933,#289934)); +#289926 = ORIENTED_EDGE('',*,*,#289904,.T.); +#289927 = ORIENTED_EDGE('',*,*,#289928,.T.); +#289928 = EDGE_CURVE('',#289896,#289762,#289929,.T.); +#289929 = LINE('',#289930,#289931); +#289930 = CARTESIAN_POINT('',(129.027164,-121.135195,1.545)); +#289931 = VECTOR('',#289932,1.); +#289932 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#289933 = ORIENTED_EDGE('',*,*,#289759,.F.); +#289934 = ORIENTED_EDGE('',*,*,#289935,.F.); +#289935 = EDGE_CURVE('',#289905,#289760,#289936,.T.); +#289936 = LINE('',#289937,#289938); +#289937 = CARTESIAN_POINT('',(129.027164,-121.135195,1.51)); +#289938 = VECTOR('',#289939,1.); +#289939 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#289940 = PLANE('',#289941); +#289941 = AXIS2_PLACEMENT_3D('',#289942,#289943,#289944); +#289942 = CARTESIAN_POINT('',(129.027164,-121.135195,1.51)); +#289943 = DIRECTION('',(0.965925627198,0.258819788118,-0.)); +#289944 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#289945 = ADVANCED_FACE('',(#289946),#289973,.F.); +#289946 = FACE_BOUND('',#289947,.T.); +#289947 = EDGE_LOOP('',(#289948,#289958,#289965,#289966)); +#289948 = ORIENTED_EDGE('',*,*,#289949,.T.); +#289949 = EDGE_CURVE('',#289950,#289952,#289954,.T.); +#289950 = VERTEX_POINT('',#289951); +#289951 = CARTESIAN_POINT('',(128.887255,-121.25,1.51)); +#289952 = VERTEX_POINT('',#289953); +#289953 = CARTESIAN_POINT('',(128.887255,-121.25,1.545)); +#289954 = LINE('',#289955,#289956); +#289955 = CARTESIAN_POINT('',(128.887255,-121.25,1.51)); +#289956 = VECTOR('',#289957,1.); +#289957 = DIRECTION('',(0.,0.,1.)); +#289958 = ORIENTED_EDGE('',*,*,#289959,.T.); +#289959 = EDGE_CURVE('',#289952,#289952,#289960,.T.); +#289960 = CIRCLE('',#289961,0.137255); +#289961 = AXIS2_PLACEMENT_3D('',#289962,#289963,#289964); +#289962 = CARTESIAN_POINT('',(128.75,-121.25,1.545)); +#289963 = DIRECTION('',(0.,0.,1.)); +#289964 = DIRECTION('',(1.,0.,-0.)); +#289965 = ORIENTED_EDGE('',*,*,#289949,.F.); +#289966 = ORIENTED_EDGE('',*,*,#289967,.F.); +#289967 = EDGE_CURVE('',#289950,#289950,#289968,.T.); +#289968 = CIRCLE('',#289969,0.137255); +#289969 = AXIS2_PLACEMENT_3D('',#289970,#289971,#289972); +#289970 = CARTESIAN_POINT('',(128.75,-121.25,1.51)); +#289971 = DIRECTION('',(0.,0.,1.)); +#289972 = DIRECTION('',(1.,0.,-0.)); +#289973 = CYLINDRICAL_SURFACE('',#289974,0.137255); +#289974 = AXIS2_PLACEMENT_3D('',#289975,#289976,#289977); +#289975 = CARTESIAN_POINT('',(128.75,-121.25,1.51)); +#289976 = DIRECTION('',(-0.,-0.,-1.)); +#289977 = DIRECTION('',(1.,0.,-0.)); +#289978 = ADVANCED_FACE('',(#289979,#289987),#289990,.F.); +#289979 = FACE_BOUND('',#289980,.T.); +#289980 = EDGE_LOOP('',(#289981,#289982,#289983,#289984,#289985,#289986) + ); +#289981 = ORIENTED_EDGE('',*,*,#289785,.T.); +#289982 = ORIENTED_EDGE('',*,*,#289817,.T.); +#289983 = ORIENTED_EDGE('',*,*,#289849,.T.); +#289984 = ORIENTED_EDGE('',*,*,#289880,.T.); +#289985 = ORIENTED_EDGE('',*,*,#289912,.T.); +#289986 = ORIENTED_EDGE('',*,*,#289935,.T.); +#289987 = FACE_BOUND('',#289988,.T.); +#289988 = EDGE_LOOP('',(#289989)); +#289989 = ORIENTED_EDGE('',*,*,#289967,.T.); +#289990 = PLANE('',#289991); +#289991 = AXIS2_PLACEMENT_3D('',#289992,#289993,#289994); +#289992 = CARTESIAN_POINT('',(0.,0.,1.51)); +#289993 = DIRECTION('',(0.,0.,1.)); +#289994 = DIRECTION('',(1.,0.,-0.)); +#289995 = ADVANCED_FACE('',(#289996,#290004),#290007,.T.); +#289996 = FACE_BOUND('',#289997,.F.); +#289997 = EDGE_LOOP('',(#289998,#289999,#290000,#290001,#290002,#290003) + ); +#289998 = ORIENTED_EDGE('',*,*,#289769,.T.); +#289999 = ORIENTED_EDGE('',*,*,#289800,.T.); +#290000 = ORIENTED_EDGE('',*,*,#289833,.T.); +#290001 = ORIENTED_EDGE('',*,*,#289864,.T.); +#290002 = ORIENTED_EDGE('',*,*,#289895,.T.); +#290003 = ORIENTED_EDGE('',*,*,#289928,.T.); +#290004 = FACE_BOUND('',#290005,.F.); +#290005 = EDGE_LOOP('',(#290006)); +#290006 = ORIENTED_EDGE('',*,*,#289959,.T.); +#290007 = PLANE('',#290008); +#290008 = AXIS2_PLACEMENT_3D('',#290009,#290010,#290011); +#290009 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290010 = DIRECTION('',(0.,0.,1.)); +#290011 = DIRECTION('',(1.,0.,-0.)); +#290012 = MANIFOLD_SOLID_BREP('',#290013); +#290013 = CLOSED_SHELL('',(#290014,#290054,#290087,#290118,#290149, + #290182,#290204,#290237,#290254)); +#290014 = ADVANCED_FACE('',(#290015),#290049,.T.); +#290015 = FACE_BOUND('',#290016,.T.); +#290016 = EDGE_LOOP('',(#290017,#290027,#290035,#290043)); +#290017 = ORIENTED_EDGE('',*,*,#290018,.T.); +#290018 = EDGE_CURVE('',#290019,#290021,#290023,.T.); +#290019 = VERTEX_POINT('',#290020); +#290020 = CARTESIAN_POINT('',(142.218869,-121.35,1.51)); +#290021 = VERTEX_POINT('',#290022); +#290022 = CARTESIAN_POINT('',(142.218869,-121.35,1.545)); +#290023 = LINE('',#290024,#290025); +#290024 = CARTESIAN_POINT('',(142.218869,-121.35,1.51)); +#290025 = VECTOR('',#290026,1.); +#290026 = DIRECTION('',(0.,0.,1.)); +#290027 = ORIENTED_EDGE('',*,*,#290028,.T.); +#290028 = EDGE_CURVE('',#290021,#290029,#290031,.T.); +#290029 = VERTEX_POINT('',#290030); +#290030 = CARTESIAN_POINT('',(140.480491,-121.348079,1.545)); +#290031 = LINE('',#290032,#290033); +#290032 = CARTESIAN_POINT('',(142.218869,-121.35,1.545)); +#290033 = VECTOR('',#290034,1.); +#290034 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#290035 = ORIENTED_EDGE('',*,*,#290036,.F.); +#290036 = EDGE_CURVE('',#290037,#290029,#290039,.T.); +#290037 = VERTEX_POINT('',#290038); +#290038 = CARTESIAN_POINT('',(140.480491,-121.348079,1.51)); +#290039 = LINE('',#290040,#290041); +#290040 = CARTESIAN_POINT('',(140.480491,-121.348079,1.51)); +#290041 = VECTOR('',#290042,1.); +#290042 = DIRECTION('',(0.,0.,1.)); +#290043 = ORIENTED_EDGE('',*,*,#290044,.F.); +#290044 = EDGE_CURVE('',#290019,#290037,#290045,.T.); +#290045 = LINE('',#290046,#290047); +#290046 = CARTESIAN_POINT('',(142.218869,-121.35,1.51)); +#290047 = VECTOR('',#290048,1.); +#290048 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#290049 = PLANE('',#290050); +#290050 = AXIS2_PLACEMENT_3D('',#290051,#290052,#290053); +#290051 = CARTESIAN_POINT('',(142.218869,-121.35,1.51)); +#290052 = DIRECTION('',(-1.105052426509E-03,-0.999999389429,0.)); +#290053 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#290054 = ADVANCED_FACE('',(#290055),#290082,.T.); +#290055 = FACE_BOUND('',#290056,.T.); +#290056 = EDGE_LOOP('',(#290057,#290058,#290067,#290075)); +#290057 = ORIENTED_EDGE('',*,*,#290036,.T.); +#290058 = ORIENTED_EDGE('',*,*,#290059,.T.); +#290059 = EDGE_CURVE('',#290029,#290060,#290062,.T.); +#290060 = VERTEX_POINT('',#290061); +#290061 = CARTESIAN_POINT('',(140.480491,-121.151921,1.545)); +#290062 = CIRCLE('',#290063,0.100000456609); +#290063 = AXIS2_PLACEMENT_3D('',#290064,#290065,#290066); +#290064 = CARTESIAN_POINT('',(140.5,-121.25,1.545)); +#290065 = DIRECTION('',(0.,0.,-1.)); +#290066 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290067 = ORIENTED_EDGE('',*,*,#290068,.F.); +#290068 = EDGE_CURVE('',#290069,#290060,#290071,.T.); +#290069 = VERTEX_POINT('',#290070); +#290070 = CARTESIAN_POINT('',(140.480491,-121.151921,1.51)); +#290071 = LINE('',#290072,#290073); +#290072 = CARTESIAN_POINT('',(140.480491,-121.151921,1.51)); +#290073 = VECTOR('',#290074,1.); +#290074 = DIRECTION('',(0.,0.,1.)); +#290075 = ORIENTED_EDGE('',*,*,#290076,.F.); +#290076 = EDGE_CURVE('',#290037,#290069,#290077,.T.); +#290077 = CIRCLE('',#290078,0.100000456609); +#290078 = AXIS2_PLACEMENT_3D('',#290079,#290080,#290081); +#290079 = CARTESIAN_POINT('',(140.5,-121.25,1.51)); +#290080 = DIRECTION('',(0.,0.,-1.)); +#290081 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290082 = CYLINDRICAL_SURFACE('',#290083,0.100000456609); +#290083 = AXIS2_PLACEMENT_3D('',#290084,#290085,#290086); +#290084 = CARTESIAN_POINT('',(140.5,-121.25,1.51)); +#290085 = DIRECTION('',(0.,0.,-1.)); +#290086 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290087 = ADVANCED_FACE('',(#290088),#290113,.T.); +#290088 = FACE_BOUND('',#290089,.T.); +#290089 = EDGE_LOOP('',(#290090,#290091,#290099,#290107)); +#290090 = ORIENTED_EDGE('',*,*,#290068,.T.); +#290091 = ORIENTED_EDGE('',*,*,#290092,.T.); +#290092 = EDGE_CURVE('',#290060,#290093,#290095,.T.); +#290093 = VERTEX_POINT('',#290094); +#290094 = CARTESIAN_POINT('',(142.218869,-121.15,1.545)); +#290095 = LINE('',#290096,#290097); +#290096 = CARTESIAN_POINT('',(140.480491,-121.151921,1.545)); +#290097 = VECTOR('',#290098,1.); +#290098 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#290099 = ORIENTED_EDGE('',*,*,#290100,.F.); +#290100 = EDGE_CURVE('',#290101,#290093,#290103,.T.); +#290101 = VERTEX_POINT('',#290102); +#290102 = CARTESIAN_POINT('',(142.218869,-121.15,1.51)); +#290103 = LINE('',#290104,#290105); +#290104 = CARTESIAN_POINT('',(142.218869,-121.15,1.51)); +#290105 = VECTOR('',#290106,1.); +#290106 = DIRECTION('',(0.,0.,1.)); +#290107 = ORIENTED_EDGE('',*,*,#290108,.F.); +#290108 = EDGE_CURVE('',#290069,#290101,#290109,.T.); +#290109 = LINE('',#290110,#290111); +#290110 = CARTESIAN_POINT('',(140.480491,-121.151921,1.51)); +#290111 = VECTOR('',#290112,1.); +#290112 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#290113 = PLANE('',#290114); +#290114 = AXIS2_PLACEMENT_3D('',#290115,#290116,#290117); +#290115 = CARTESIAN_POINT('',(140.480491,-121.151921,1.51)); +#290116 = DIRECTION('',(-1.105052426509E-03,0.999999389429,0.)); +#290117 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#290118 = ADVANCED_FACE('',(#290119),#290144,.T.); +#290119 = FACE_BOUND('',#290120,.T.); +#290120 = EDGE_LOOP('',(#290121,#290122,#290130,#290138)); +#290121 = ORIENTED_EDGE('',*,*,#290100,.T.); +#290122 = ORIENTED_EDGE('',*,*,#290123,.T.); +#290123 = EDGE_CURVE('',#290093,#290124,#290126,.T.); +#290124 = VERTEX_POINT('',#290125); +#290125 = CARTESIAN_POINT('',(142.222836,-121.135195,1.545)); +#290126 = LINE('',#290127,#290128); +#290127 = CARTESIAN_POINT('',(142.218869,-121.15,1.545)); +#290128 = VECTOR('',#290129,1.); +#290129 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290130 = ORIENTED_EDGE('',*,*,#290131,.F.); +#290131 = EDGE_CURVE('',#290132,#290124,#290134,.T.); +#290132 = VERTEX_POINT('',#290133); +#290133 = CARTESIAN_POINT('',(142.222836,-121.135195,1.51)); +#290134 = LINE('',#290135,#290136); +#290135 = CARTESIAN_POINT('',(142.222836,-121.135195,1.51)); +#290136 = VECTOR('',#290137,1.); +#290137 = DIRECTION('',(0.,0.,1.)); +#290138 = ORIENTED_EDGE('',*,*,#290139,.F.); +#290139 = EDGE_CURVE('',#290101,#290132,#290140,.T.); +#290140 = LINE('',#290141,#290142); +#290141 = CARTESIAN_POINT('',(142.218869,-121.15,1.51)); +#290142 = VECTOR('',#290143,1.); +#290143 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290144 = PLANE('',#290145); +#290145 = AXIS2_PLACEMENT_3D('',#290146,#290147,#290148); +#290146 = CARTESIAN_POINT('',(142.218869,-121.15,1.51)); +#290147 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#290148 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290149 = ADVANCED_FACE('',(#290150),#290177,.T.); +#290150 = FACE_BOUND('',#290151,.T.); +#290151 = EDGE_LOOP('',(#290152,#290153,#290162,#290170)); +#290152 = ORIENTED_EDGE('',*,*,#290131,.T.); +#290153 = ORIENTED_EDGE('',*,*,#290154,.T.); +#290154 = EDGE_CURVE('',#290124,#290155,#290157,.T.); +#290155 = VERTEX_POINT('',#290156); +#290156 = CARTESIAN_POINT('',(142.222836,-121.364805,1.545)); +#290157 = CIRCLE('',#290158,0.299997422619); +#290158 = AXIS2_PLACEMENT_3D('',#290159,#290160,#290161); +#290159 = CARTESIAN_POINT('',(142.49999708232,-121.25,1.545)); +#290160 = DIRECTION('',(0.,0.,-1.)); +#290161 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290162 = ORIENTED_EDGE('',*,*,#290163,.F.); +#290163 = EDGE_CURVE('',#290164,#290155,#290166,.T.); +#290164 = VERTEX_POINT('',#290165); +#290165 = CARTESIAN_POINT('',(142.222836,-121.364805,1.51)); +#290166 = LINE('',#290167,#290168); +#290167 = CARTESIAN_POINT('',(142.222836,-121.364805,1.51)); +#290168 = VECTOR('',#290169,1.); +#290169 = DIRECTION('',(0.,0.,1.)); +#290170 = ORIENTED_EDGE('',*,*,#290171,.F.); +#290171 = EDGE_CURVE('',#290132,#290164,#290172,.T.); +#290172 = CIRCLE('',#290173,0.299997422619); +#290173 = AXIS2_PLACEMENT_3D('',#290174,#290175,#290176); +#290174 = CARTESIAN_POINT('',(142.49999708232,-121.25,1.51)); +#290175 = DIRECTION('',(0.,0.,-1.)); +#290176 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290177 = CYLINDRICAL_SURFACE('',#290178,0.299997422619); +#290178 = AXIS2_PLACEMENT_3D('',#290179,#290180,#290181); +#290179 = CARTESIAN_POINT('',(142.49999708232,-121.25,1.51)); +#290180 = DIRECTION('',(0.,0.,-1.)); +#290181 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290182 = ADVANCED_FACE('',(#290183),#290199,.T.); +#290183 = FACE_BOUND('',#290184,.T.); +#290184 = EDGE_LOOP('',(#290185,#290186,#290192,#290193)); +#290185 = ORIENTED_EDGE('',*,*,#290163,.T.); +#290186 = ORIENTED_EDGE('',*,*,#290187,.T.); +#290187 = EDGE_CURVE('',#290155,#290021,#290188,.T.); +#290188 = LINE('',#290189,#290190); +#290189 = CARTESIAN_POINT('',(142.222836,-121.364805,1.545)); +#290190 = VECTOR('',#290191,1.); +#290191 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290192 = ORIENTED_EDGE('',*,*,#290018,.F.); +#290193 = ORIENTED_EDGE('',*,*,#290194,.F.); +#290194 = EDGE_CURVE('',#290164,#290019,#290195,.T.); +#290195 = LINE('',#290196,#290197); +#290196 = CARTESIAN_POINT('',(142.222836,-121.364805,1.51)); +#290197 = VECTOR('',#290198,1.); +#290198 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290199 = PLANE('',#290200); +#290200 = AXIS2_PLACEMENT_3D('',#290201,#290202,#290203); +#290201 = CARTESIAN_POINT('',(142.222836,-121.364805,1.51)); +#290202 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#290203 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290204 = ADVANCED_FACE('',(#290205),#290232,.F.); +#290205 = FACE_BOUND('',#290206,.T.); +#290206 = EDGE_LOOP('',(#290207,#290217,#290224,#290225)); +#290207 = ORIENTED_EDGE('',*,*,#290208,.T.); +#290208 = EDGE_CURVE('',#290209,#290211,#290213,.T.); +#290209 = VERTEX_POINT('',#290210); +#290210 = CARTESIAN_POINT('',(142.637255,-121.25,1.51)); +#290211 = VERTEX_POINT('',#290212); +#290212 = CARTESIAN_POINT('',(142.637255,-121.25,1.545)); +#290213 = LINE('',#290214,#290215); +#290214 = CARTESIAN_POINT('',(142.637255,-121.25,1.51)); +#290215 = VECTOR('',#290216,1.); +#290216 = DIRECTION('',(0.,0.,1.)); +#290217 = ORIENTED_EDGE('',*,*,#290218,.T.); +#290218 = EDGE_CURVE('',#290211,#290211,#290219,.T.); +#290219 = CIRCLE('',#290220,0.137255); +#290220 = AXIS2_PLACEMENT_3D('',#290221,#290222,#290223); +#290221 = CARTESIAN_POINT('',(142.5,-121.25,1.545)); +#290222 = DIRECTION('',(0.,0.,1.)); +#290223 = DIRECTION('',(1.,0.,-0.)); +#290224 = ORIENTED_EDGE('',*,*,#290208,.F.); +#290225 = ORIENTED_EDGE('',*,*,#290226,.F.); +#290226 = EDGE_CURVE('',#290209,#290209,#290227,.T.); +#290227 = CIRCLE('',#290228,0.137255); +#290228 = AXIS2_PLACEMENT_3D('',#290229,#290230,#290231); +#290229 = CARTESIAN_POINT('',(142.5,-121.25,1.51)); +#290230 = DIRECTION('',(0.,0.,1.)); +#290231 = DIRECTION('',(1.,0.,-0.)); +#290232 = CYLINDRICAL_SURFACE('',#290233,0.137255); +#290233 = AXIS2_PLACEMENT_3D('',#290234,#290235,#290236); +#290234 = CARTESIAN_POINT('',(142.5,-121.25,1.51)); +#290235 = DIRECTION('',(-0.,-0.,-1.)); +#290236 = DIRECTION('',(1.,0.,-0.)); +#290237 = ADVANCED_FACE('',(#290238,#290246),#290249,.F.); +#290238 = FACE_BOUND('',#290239,.T.); +#290239 = EDGE_LOOP('',(#290240,#290241,#290242,#290243,#290244,#290245) + ); +#290240 = ORIENTED_EDGE('',*,*,#290044,.T.); +#290241 = ORIENTED_EDGE('',*,*,#290076,.T.); +#290242 = ORIENTED_EDGE('',*,*,#290108,.T.); +#290243 = ORIENTED_EDGE('',*,*,#290139,.T.); +#290244 = ORIENTED_EDGE('',*,*,#290171,.T.); +#290245 = ORIENTED_EDGE('',*,*,#290194,.T.); +#290246 = FACE_BOUND('',#290247,.T.); +#290247 = EDGE_LOOP('',(#290248)); +#290248 = ORIENTED_EDGE('',*,*,#290226,.T.); +#290249 = PLANE('',#290250); +#290250 = AXIS2_PLACEMENT_3D('',#290251,#290252,#290253); +#290251 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290252 = DIRECTION('',(0.,0.,1.)); +#290253 = DIRECTION('',(1.,0.,-0.)); +#290254 = ADVANCED_FACE('',(#290255,#290263),#290266,.T.); +#290255 = FACE_BOUND('',#290256,.F.); +#290256 = EDGE_LOOP('',(#290257,#290258,#290259,#290260,#290261,#290262) + ); +#290257 = ORIENTED_EDGE('',*,*,#290028,.T.); +#290258 = ORIENTED_EDGE('',*,*,#290059,.T.); +#290259 = ORIENTED_EDGE('',*,*,#290092,.T.); +#290260 = ORIENTED_EDGE('',*,*,#290123,.T.); +#290261 = ORIENTED_EDGE('',*,*,#290154,.T.); +#290262 = ORIENTED_EDGE('',*,*,#290187,.T.); +#290263 = FACE_BOUND('',#290264,.F.); +#290264 = EDGE_LOOP('',(#290265)); +#290265 = ORIENTED_EDGE('',*,*,#290218,.T.); +#290266 = PLANE('',#290267); +#290267 = AXIS2_PLACEMENT_3D('',#290268,#290269,#290270); +#290268 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290269 = DIRECTION('',(0.,0.,1.)); +#290270 = DIRECTION('',(1.,0.,-0.)); +#290271 = MANIFOLD_SOLID_BREP('',#290272); +#290272 = CLOSED_SHELL('',(#290273,#290313,#290346,#290377,#290408, + #290441,#290463,#290496,#290513)); +#290273 = ADVANCED_FACE('',(#290274),#290308,.T.); +#290274 = FACE_BOUND('',#290275,.T.); +#290275 = EDGE_LOOP('',(#290276,#290286,#290294,#290302)); +#290276 = ORIENTED_EDGE('',*,*,#290277,.T.); +#290277 = EDGE_CURVE('',#290278,#290280,#290282,.T.); +#290278 = VERTEX_POINT('',#290279); +#290279 = CARTESIAN_POINT('',(152.218869,-121.35,1.51)); +#290280 = VERTEX_POINT('',#290281); +#290281 = CARTESIAN_POINT('',(152.218869,-121.35,1.545)); +#290282 = LINE('',#290283,#290284); +#290283 = CARTESIAN_POINT('',(152.218869,-121.35,1.51)); +#290284 = VECTOR('',#290285,1.); +#290285 = DIRECTION('',(0.,0.,1.)); +#290286 = ORIENTED_EDGE('',*,*,#290287,.T.); +#290287 = EDGE_CURVE('',#290280,#290288,#290290,.T.); +#290288 = VERTEX_POINT('',#290289); +#290289 = CARTESIAN_POINT('',(150.730491,-121.348079,1.545)); +#290290 = LINE('',#290291,#290292); +#290291 = CARTESIAN_POINT('',(152.218869,-121.35,1.545)); +#290292 = VECTOR('',#290293,1.); +#290293 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#290294 = ORIENTED_EDGE('',*,*,#290295,.F.); +#290295 = EDGE_CURVE('',#290296,#290288,#290298,.T.); +#290296 = VERTEX_POINT('',#290297); +#290297 = CARTESIAN_POINT('',(150.730491,-121.348079,1.51)); +#290298 = LINE('',#290299,#290300); +#290299 = CARTESIAN_POINT('',(150.730491,-121.348079,1.51)); +#290300 = VECTOR('',#290301,1.); +#290301 = DIRECTION('',(0.,0.,1.)); +#290302 = ORIENTED_EDGE('',*,*,#290303,.F.); +#290303 = EDGE_CURVE('',#290278,#290296,#290304,.T.); +#290304 = LINE('',#290305,#290306); +#290305 = CARTESIAN_POINT('',(152.218869,-121.35,1.51)); +#290306 = VECTOR('',#290307,1.); +#290307 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#290308 = PLANE('',#290309); +#290309 = AXIS2_PLACEMENT_3D('',#290310,#290311,#290312); +#290310 = CARTESIAN_POINT('',(152.218869,-121.35,1.51)); +#290311 = DIRECTION('',(-1.290665677655E-03,-0.999999167091,0.)); +#290312 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#290313 = ADVANCED_FACE('',(#290314),#290341,.T.); +#290314 = FACE_BOUND('',#290315,.T.); +#290315 = EDGE_LOOP('',(#290316,#290317,#290326,#290334)); +#290316 = ORIENTED_EDGE('',*,*,#290295,.T.); +#290317 = ORIENTED_EDGE('',*,*,#290318,.T.); +#290318 = EDGE_CURVE('',#290288,#290319,#290321,.T.); +#290319 = VERTEX_POINT('',#290320); +#290320 = CARTESIAN_POINT('',(150.730491,-121.151921,1.545)); +#290321 = CIRCLE('',#290322,0.100000456609); +#290322 = AXIS2_PLACEMENT_3D('',#290323,#290324,#290325); +#290323 = CARTESIAN_POINT('',(150.75,-121.25,1.545)); +#290324 = DIRECTION('',(0.,0.,-1.)); +#290325 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290326 = ORIENTED_EDGE('',*,*,#290327,.F.); +#290327 = EDGE_CURVE('',#290328,#290319,#290330,.T.); +#290328 = VERTEX_POINT('',#290329); +#290329 = CARTESIAN_POINT('',(150.730491,-121.151921,1.51)); +#290330 = LINE('',#290331,#290332); +#290331 = CARTESIAN_POINT('',(150.730491,-121.151921,1.51)); +#290332 = VECTOR('',#290333,1.); +#290333 = DIRECTION('',(0.,0.,1.)); +#290334 = ORIENTED_EDGE('',*,*,#290335,.F.); +#290335 = EDGE_CURVE('',#290296,#290328,#290336,.T.); +#290336 = CIRCLE('',#290337,0.100000456609); +#290337 = AXIS2_PLACEMENT_3D('',#290338,#290339,#290340); +#290338 = CARTESIAN_POINT('',(150.75,-121.25,1.51)); +#290339 = DIRECTION('',(0.,0.,-1.)); +#290340 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290341 = CYLINDRICAL_SURFACE('',#290342,0.100000456609); +#290342 = AXIS2_PLACEMENT_3D('',#290343,#290344,#290345); +#290343 = CARTESIAN_POINT('',(150.75,-121.25,1.51)); +#290344 = DIRECTION('',(0.,0.,-1.)); +#290345 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#290346 = ADVANCED_FACE('',(#290347),#290372,.T.); +#290347 = FACE_BOUND('',#290348,.T.); +#290348 = EDGE_LOOP('',(#290349,#290350,#290358,#290366)); +#290349 = ORIENTED_EDGE('',*,*,#290327,.T.); +#290350 = ORIENTED_EDGE('',*,*,#290351,.T.); +#290351 = EDGE_CURVE('',#290319,#290352,#290354,.T.); +#290352 = VERTEX_POINT('',#290353); +#290353 = CARTESIAN_POINT('',(152.218869,-121.15,1.545)); +#290354 = LINE('',#290355,#290356); +#290355 = CARTESIAN_POINT('',(150.730491,-121.151921,1.545)); +#290356 = VECTOR('',#290357,1.); +#290357 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#290358 = ORIENTED_EDGE('',*,*,#290359,.F.); +#290359 = EDGE_CURVE('',#290360,#290352,#290362,.T.); +#290360 = VERTEX_POINT('',#290361); +#290361 = CARTESIAN_POINT('',(152.218869,-121.15,1.51)); +#290362 = LINE('',#290363,#290364); +#290363 = CARTESIAN_POINT('',(152.218869,-121.15,1.51)); +#290364 = VECTOR('',#290365,1.); +#290365 = DIRECTION('',(0.,0.,1.)); +#290366 = ORIENTED_EDGE('',*,*,#290367,.F.); +#290367 = EDGE_CURVE('',#290328,#290360,#290368,.T.); +#290368 = LINE('',#290369,#290370); +#290369 = CARTESIAN_POINT('',(150.730491,-121.151921,1.51)); +#290370 = VECTOR('',#290371,1.); +#290371 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#290372 = PLANE('',#290373); +#290373 = AXIS2_PLACEMENT_3D('',#290374,#290375,#290376); +#290374 = CARTESIAN_POINT('',(150.730491,-121.151921,1.51)); +#290375 = DIRECTION('',(-1.290665677655E-03,0.999999167091,0.)); +#290376 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#290377 = ADVANCED_FACE('',(#290378),#290403,.T.); +#290378 = FACE_BOUND('',#290379,.T.); +#290379 = EDGE_LOOP('',(#290380,#290381,#290389,#290397)); +#290380 = ORIENTED_EDGE('',*,*,#290359,.T.); +#290381 = ORIENTED_EDGE('',*,*,#290382,.T.); +#290382 = EDGE_CURVE('',#290352,#290383,#290385,.T.); +#290383 = VERTEX_POINT('',#290384); +#290384 = CARTESIAN_POINT('',(152.222836,-121.135195,1.545)); +#290385 = LINE('',#290386,#290387); +#290386 = CARTESIAN_POINT('',(152.218869,-121.15,1.545)); +#290387 = VECTOR('',#290388,1.); +#290388 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290389 = ORIENTED_EDGE('',*,*,#290390,.F.); +#290390 = EDGE_CURVE('',#290391,#290383,#290393,.T.); +#290391 = VERTEX_POINT('',#290392); +#290392 = CARTESIAN_POINT('',(152.222836,-121.135195,1.51)); +#290393 = LINE('',#290394,#290395); +#290394 = CARTESIAN_POINT('',(152.222836,-121.135195,1.51)); +#290395 = VECTOR('',#290396,1.); +#290396 = DIRECTION('',(0.,0.,1.)); +#290397 = ORIENTED_EDGE('',*,*,#290398,.F.); +#290398 = EDGE_CURVE('',#290360,#290391,#290399,.T.); +#290399 = LINE('',#290400,#290401); +#290400 = CARTESIAN_POINT('',(152.218869,-121.15,1.51)); +#290401 = VECTOR('',#290402,1.); +#290402 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290403 = PLANE('',#290404); +#290404 = AXIS2_PLACEMENT_3D('',#290405,#290406,#290407); +#290405 = CARTESIAN_POINT('',(152.218869,-121.15,1.51)); +#290406 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#290407 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#290408 = ADVANCED_FACE('',(#290409),#290436,.T.); +#290409 = FACE_BOUND('',#290410,.T.); +#290410 = EDGE_LOOP('',(#290411,#290412,#290421,#290429)); +#290411 = ORIENTED_EDGE('',*,*,#290390,.T.); +#290412 = ORIENTED_EDGE('',*,*,#290413,.T.); +#290413 = EDGE_CURVE('',#290383,#290414,#290416,.T.); +#290414 = VERTEX_POINT('',#290415); +#290415 = CARTESIAN_POINT('',(152.222836,-121.364805,1.545)); +#290416 = CIRCLE('',#290417,0.299997422619); +#290417 = AXIS2_PLACEMENT_3D('',#290418,#290419,#290420); +#290418 = CARTESIAN_POINT('',(152.49999708232,-121.25,1.545)); +#290419 = DIRECTION('',(0.,0.,-1.)); +#290420 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290421 = ORIENTED_EDGE('',*,*,#290422,.F.); +#290422 = EDGE_CURVE('',#290423,#290414,#290425,.T.); +#290423 = VERTEX_POINT('',#290424); +#290424 = CARTESIAN_POINT('',(152.222836,-121.364805,1.51)); +#290425 = LINE('',#290426,#290427); +#290426 = CARTESIAN_POINT('',(152.222836,-121.364805,1.51)); +#290427 = VECTOR('',#290428,1.); +#290428 = DIRECTION('',(0.,0.,1.)); +#290429 = ORIENTED_EDGE('',*,*,#290430,.F.); +#290430 = EDGE_CURVE('',#290391,#290423,#290431,.T.); +#290431 = CIRCLE('',#290432,0.299997422619); +#290432 = AXIS2_PLACEMENT_3D('',#290433,#290434,#290435); +#290433 = CARTESIAN_POINT('',(152.49999708232,-121.25,1.51)); +#290434 = DIRECTION('',(0.,0.,-1.)); +#290435 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290436 = CYLINDRICAL_SURFACE('',#290437,0.299997422619); +#290437 = AXIS2_PLACEMENT_3D('',#290438,#290439,#290440); +#290438 = CARTESIAN_POINT('',(152.49999708232,-121.25,1.51)); +#290439 = DIRECTION('',(0.,0.,-1.)); +#290440 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#290441 = ADVANCED_FACE('',(#290442),#290458,.T.); +#290442 = FACE_BOUND('',#290443,.T.); +#290443 = EDGE_LOOP('',(#290444,#290445,#290451,#290452)); +#290444 = ORIENTED_EDGE('',*,*,#290422,.T.); +#290445 = ORIENTED_EDGE('',*,*,#290446,.T.); +#290446 = EDGE_CURVE('',#290414,#290280,#290447,.T.); +#290447 = LINE('',#290448,#290449); +#290448 = CARTESIAN_POINT('',(152.222836,-121.364805,1.545)); +#290449 = VECTOR('',#290450,1.); +#290450 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290451 = ORIENTED_EDGE('',*,*,#290277,.F.); +#290452 = ORIENTED_EDGE('',*,*,#290453,.F.); +#290453 = EDGE_CURVE('',#290423,#290278,#290454,.T.); +#290454 = LINE('',#290455,#290456); +#290455 = CARTESIAN_POINT('',(152.222836,-121.364805,1.51)); +#290456 = VECTOR('',#290457,1.); +#290457 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290458 = PLANE('',#290459); +#290459 = AXIS2_PLACEMENT_3D('',#290460,#290461,#290462); +#290460 = CARTESIAN_POINT('',(152.222836,-121.364805,1.51)); +#290461 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#290462 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#290463 = ADVANCED_FACE('',(#290464),#290491,.F.); +#290464 = FACE_BOUND('',#290465,.T.); +#290465 = EDGE_LOOP('',(#290466,#290476,#290483,#290484)); +#290466 = ORIENTED_EDGE('',*,*,#290467,.T.); +#290467 = EDGE_CURVE('',#290468,#290470,#290472,.T.); +#290468 = VERTEX_POINT('',#290469); +#290469 = CARTESIAN_POINT('',(152.637255,-121.25,1.51)); +#290470 = VERTEX_POINT('',#290471); +#290471 = CARTESIAN_POINT('',(152.637255,-121.25,1.545)); +#290472 = LINE('',#290473,#290474); +#290473 = CARTESIAN_POINT('',(152.637255,-121.25,1.51)); +#290474 = VECTOR('',#290475,1.); +#290475 = DIRECTION('',(0.,0.,1.)); +#290476 = ORIENTED_EDGE('',*,*,#290477,.T.); +#290477 = EDGE_CURVE('',#290470,#290470,#290478,.T.); +#290478 = CIRCLE('',#290479,0.137255); +#290479 = AXIS2_PLACEMENT_3D('',#290480,#290481,#290482); +#290480 = CARTESIAN_POINT('',(152.5,-121.25,1.545)); +#290481 = DIRECTION('',(0.,0.,1.)); +#290482 = DIRECTION('',(1.,0.,-0.)); +#290483 = ORIENTED_EDGE('',*,*,#290467,.F.); +#290484 = ORIENTED_EDGE('',*,*,#290485,.F.); +#290485 = EDGE_CURVE('',#290468,#290468,#290486,.T.); +#290486 = CIRCLE('',#290487,0.137255); +#290487 = AXIS2_PLACEMENT_3D('',#290488,#290489,#290490); +#290488 = CARTESIAN_POINT('',(152.5,-121.25,1.51)); +#290489 = DIRECTION('',(0.,0.,1.)); +#290490 = DIRECTION('',(1.,0.,-0.)); +#290491 = CYLINDRICAL_SURFACE('',#290492,0.137255); +#290492 = AXIS2_PLACEMENT_3D('',#290493,#290494,#290495); +#290493 = CARTESIAN_POINT('',(152.5,-121.25,1.51)); +#290494 = DIRECTION('',(-0.,-0.,-1.)); +#290495 = DIRECTION('',(1.,0.,-0.)); +#290496 = ADVANCED_FACE('',(#290497,#290505),#290508,.F.); +#290497 = FACE_BOUND('',#290498,.T.); +#290498 = EDGE_LOOP('',(#290499,#290500,#290501,#290502,#290503,#290504) + ); +#290499 = ORIENTED_EDGE('',*,*,#290303,.T.); +#290500 = ORIENTED_EDGE('',*,*,#290335,.T.); +#290501 = ORIENTED_EDGE('',*,*,#290367,.T.); +#290502 = ORIENTED_EDGE('',*,*,#290398,.T.); +#290503 = ORIENTED_EDGE('',*,*,#290430,.T.); +#290504 = ORIENTED_EDGE('',*,*,#290453,.T.); +#290505 = FACE_BOUND('',#290506,.T.); +#290506 = EDGE_LOOP('',(#290507)); +#290507 = ORIENTED_EDGE('',*,*,#290485,.T.); +#290508 = PLANE('',#290509); +#290509 = AXIS2_PLACEMENT_3D('',#290510,#290511,#290512); +#290510 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290511 = DIRECTION('',(0.,0.,1.)); +#290512 = DIRECTION('',(1.,0.,-0.)); +#290513 = ADVANCED_FACE('',(#290514,#290522),#290525,.T.); +#290514 = FACE_BOUND('',#290515,.F.); +#290515 = EDGE_LOOP('',(#290516,#290517,#290518,#290519,#290520,#290521) + ); +#290516 = ORIENTED_EDGE('',*,*,#290287,.T.); +#290517 = ORIENTED_EDGE('',*,*,#290318,.T.); +#290518 = ORIENTED_EDGE('',*,*,#290351,.T.); +#290519 = ORIENTED_EDGE('',*,*,#290382,.T.); +#290520 = ORIENTED_EDGE('',*,*,#290413,.T.); +#290521 = ORIENTED_EDGE('',*,*,#290446,.T.); +#290522 = FACE_BOUND('',#290523,.F.); +#290523 = EDGE_LOOP('',(#290524)); +#290524 = ORIENTED_EDGE('',*,*,#290477,.T.); +#290525 = PLANE('',#290526); +#290526 = AXIS2_PLACEMENT_3D('',#290527,#290528,#290529); +#290527 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290528 = DIRECTION('',(0.,0.,1.)); +#290529 = DIRECTION('',(1.,0.,-0.)); +#290530 = MANIFOLD_SOLID_BREP('',#290531); +#290531 = CLOSED_SHELL('',(#290532,#290565,#290598,#290610)); +#290532 = ADVANCED_FACE('',(#290533),#290560,.T.); +#290533 = FACE_BOUND('',#290534,.F.); +#290534 = EDGE_LOOP('',(#290535,#290545,#290552,#290553)); +#290535 = ORIENTED_EDGE('',*,*,#290536,.T.); +#290536 = EDGE_CURVE('',#290537,#290539,#290541,.T.); +#290537 = VERTEX_POINT('',#290538); +#290538 = CARTESIAN_POINT('',(133.320634,-120.5,1.51)); +#290539 = VERTEX_POINT('',#290540); +#290540 = CARTESIAN_POINT('',(133.320634,-120.5,1.545)); +#290541 = LINE('',#290542,#290543); +#290542 = CARTESIAN_POINT('',(133.320634,-120.5,1.51)); +#290543 = VECTOR('',#290544,1.); +#290544 = DIRECTION('',(0.,0.,1.)); +#290545 = ORIENTED_EDGE('',*,*,#290546,.T.); +#290546 = EDGE_CURVE('',#290539,#290539,#290547,.T.); +#290547 = CIRCLE('',#290548,0.3); +#290548 = AXIS2_PLACEMENT_3D('',#290549,#290550,#290551); +#290549 = CARTESIAN_POINT('',(133.020634,-120.5,1.545)); +#290550 = DIRECTION('',(0.,0.,1.)); +#290551 = DIRECTION('',(1.,0.,-0.)); +#290552 = ORIENTED_EDGE('',*,*,#290536,.F.); +#290553 = ORIENTED_EDGE('',*,*,#290554,.F.); +#290554 = EDGE_CURVE('',#290537,#290537,#290555,.T.); +#290555 = CIRCLE('',#290556,0.3); +#290556 = AXIS2_PLACEMENT_3D('',#290557,#290558,#290559); +#290557 = CARTESIAN_POINT('',(133.020634,-120.5,1.51)); +#290558 = DIRECTION('',(0.,0.,1.)); +#290559 = DIRECTION('',(1.,0.,-0.)); +#290560 = CYLINDRICAL_SURFACE('',#290561,0.3); +#290561 = AXIS2_PLACEMENT_3D('',#290562,#290563,#290564); +#290562 = CARTESIAN_POINT('',(133.020634,-120.5,1.51)); +#290563 = DIRECTION('',(-0.,-0.,-1.)); +#290564 = DIRECTION('',(1.,0.,-0.)); +#290565 = ADVANCED_FACE('',(#290566),#290593,.F.); +#290566 = FACE_BOUND('',#290567,.T.); +#290567 = EDGE_LOOP('',(#290568,#290578,#290585,#290586)); +#290568 = ORIENTED_EDGE('',*,*,#290569,.T.); +#290569 = EDGE_CURVE('',#290570,#290572,#290574,.T.); +#290570 = VERTEX_POINT('',#290571); +#290571 = CARTESIAN_POINT('',(133.157889,-120.5,1.51)); +#290572 = VERTEX_POINT('',#290573); +#290573 = CARTESIAN_POINT('',(133.157889,-120.5,1.545)); +#290574 = LINE('',#290575,#290576); +#290575 = CARTESIAN_POINT('',(133.157889,-120.5,1.51)); +#290576 = VECTOR('',#290577,1.); +#290577 = DIRECTION('',(0.,0.,1.)); +#290578 = ORIENTED_EDGE('',*,*,#290579,.T.); +#290579 = EDGE_CURVE('',#290572,#290572,#290580,.T.); +#290580 = CIRCLE('',#290581,0.137255); +#290581 = AXIS2_PLACEMENT_3D('',#290582,#290583,#290584); +#290582 = CARTESIAN_POINT('',(133.020634,-120.5,1.545)); +#290583 = DIRECTION('',(0.,0.,1.)); +#290584 = DIRECTION('',(1.,0.,-0.)); +#290585 = ORIENTED_EDGE('',*,*,#290569,.F.); +#290586 = ORIENTED_EDGE('',*,*,#290587,.F.); +#290587 = EDGE_CURVE('',#290570,#290570,#290588,.T.); +#290588 = CIRCLE('',#290589,0.137255); +#290589 = AXIS2_PLACEMENT_3D('',#290590,#290591,#290592); +#290590 = CARTESIAN_POINT('',(133.020634,-120.5,1.51)); +#290591 = DIRECTION('',(0.,0.,1.)); +#290592 = DIRECTION('',(1.,0.,-0.)); +#290593 = CYLINDRICAL_SURFACE('',#290594,0.137255); +#290594 = AXIS2_PLACEMENT_3D('',#290595,#290596,#290597); +#290595 = CARTESIAN_POINT('',(133.020634,-120.5,1.51)); +#290596 = DIRECTION('',(-0.,-0.,-1.)); +#290597 = DIRECTION('',(1.,0.,-0.)); +#290598 = ADVANCED_FACE('',(#290599,#290602),#290605,.F.); +#290599 = FACE_BOUND('',#290600,.F.); +#290600 = EDGE_LOOP('',(#290601)); +#290601 = ORIENTED_EDGE('',*,*,#290554,.T.); +#290602 = FACE_BOUND('',#290603,.T.); +#290603 = EDGE_LOOP('',(#290604)); +#290604 = ORIENTED_EDGE('',*,*,#290587,.T.); +#290605 = PLANE('',#290606); +#290606 = AXIS2_PLACEMENT_3D('',#290607,#290608,#290609); +#290607 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290608 = DIRECTION('',(0.,0.,1.)); +#290609 = DIRECTION('',(1.,0.,-0.)); +#290610 = ADVANCED_FACE('',(#290611,#290614),#290617,.T.); +#290611 = FACE_BOUND('',#290612,.T.); +#290612 = EDGE_LOOP('',(#290613)); +#290613 = ORIENTED_EDGE('',*,*,#290546,.T.); +#290614 = FACE_BOUND('',#290615,.F.); +#290615 = EDGE_LOOP('',(#290616)); +#290616 = ORIENTED_EDGE('',*,*,#290579,.T.); +#290617 = PLANE('',#290618); +#290618 = AXIS2_PLACEMENT_3D('',#290619,#290620,#290621); +#290619 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290620 = DIRECTION('',(0.,0.,1.)); +#290621 = DIRECTION('',(1.,0.,-0.)); +#290622 = MANIFOLD_SOLID_BREP('',#290623); +#290623 = CLOSED_SHELL('',(#290624,#290657,#290690,#290702)); +#290624 = ADVANCED_FACE('',(#290625),#290652,.T.); +#290625 = FACE_BOUND('',#290626,.F.); +#290626 = EDGE_LOOP('',(#290627,#290637,#290644,#290645)); +#290627 = ORIENTED_EDGE('',*,*,#290628,.T.); +#290628 = EDGE_CURVE('',#290629,#290631,#290633,.T.); +#290629 = VERTEX_POINT('',#290630); +#290630 = CARTESIAN_POINT('',(139.8,-120.,1.51)); +#290631 = VERTEX_POINT('',#290632); +#290632 = CARTESIAN_POINT('',(139.8,-120.,1.545)); +#290633 = LINE('',#290634,#290635); +#290634 = CARTESIAN_POINT('',(139.8,-120.,1.51)); +#290635 = VECTOR('',#290636,1.); +#290636 = DIRECTION('',(0.,0.,1.)); +#290637 = ORIENTED_EDGE('',*,*,#290638,.T.); +#290638 = EDGE_CURVE('',#290631,#290631,#290639,.T.); +#290639 = CIRCLE('',#290640,0.3); +#290640 = AXIS2_PLACEMENT_3D('',#290641,#290642,#290643); +#290641 = CARTESIAN_POINT('',(139.5,-120.,1.545)); +#290642 = DIRECTION('',(0.,0.,1.)); +#290643 = DIRECTION('',(1.,0.,-0.)); +#290644 = ORIENTED_EDGE('',*,*,#290628,.F.); +#290645 = ORIENTED_EDGE('',*,*,#290646,.F.); +#290646 = EDGE_CURVE('',#290629,#290629,#290647,.T.); +#290647 = CIRCLE('',#290648,0.3); +#290648 = AXIS2_PLACEMENT_3D('',#290649,#290650,#290651); +#290649 = CARTESIAN_POINT('',(139.5,-120.,1.51)); +#290650 = DIRECTION('',(0.,0.,1.)); +#290651 = DIRECTION('',(1.,0.,-0.)); +#290652 = CYLINDRICAL_SURFACE('',#290653,0.3); +#290653 = AXIS2_PLACEMENT_3D('',#290654,#290655,#290656); +#290654 = CARTESIAN_POINT('',(139.5,-120.,1.51)); +#290655 = DIRECTION('',(-0.,-0.,-1.)); +#290656 = DIRECTION('',(1.,0.,-0.)); +#290657 = ADVANCED_FACE('',(#290658),#290685,.F.); +#290658 = FACE_BOUND('',#290659,.T.); +#290659 = EDGE_LOOP('',(#290660,#290670,#290677,#290678)); +#290660 = ORIENTED_EDGE('',*,*,#290661,.T.); +#290661 = EDGE_CURVE('',#290662,#290664,#290666,.T.); +#290662 = VERTEX_POINT('',#290663); +#290663 = CARTESIAN_POINT('',(139.637255,-120.,1.51)); +#290664 = VERTEX_POINT('',#290665); +#290665 = CARTESIAN_POINT('',(139.637255,-120.,1.545)); +#290666 = LINE('',#290667,#290668); +#290667 = CARTESIAN_POINT('',(139.637255,-120.,1.51)); +#290668 = VECTOR('',#290669,1.); +#290669 = DIRECTION('',(0.,0.,1.)); +#290670 = ORIENTED_EDGE('',*,*,#290671,.T.); +#290671 = EDGE_CURVE('',#290664,#290664,#290672,.T.); +#290672 = CIRCLE('',#290673,0.137255); +#290673 = AXIS2_PLACEMENT_3D('',#290674,#290675,#290676); +#290674 = CARTESIAN_POINT('',(139.5,-120.,1.545)); +#290675 = DIRECTION('',(0.,0.,1.)); +#290676 = DIRECTION('',(1.,0.,-0.)); +#290677 = ORIENTED_EDGE('',*,*,#290661,.F.); +#290678 = ORIENTED_EDGE('',*,*,#290679,.F.); +#290679 = EDGE_CURVE('',#290662,#290662,#290680,.T.); +#290680 = CIRCLE('',#290681,0.137255); +#290681 = AXIS2_PLACEMENT_3D('',#290682,#290683,#290684); +#290682 = CARTESIAN_POINT('',(139.5,-120.,1.51)); +#290683 = DIRECTION('',(0.,0.,1.)); +#290684 = DIRECTION('',(1.,0.,-0.)); +#290685 = CYLINDRICAL_SURFACE('',#290686,0.137255); +#290686 = AXIS2_PLACEMENT_3D('',#290687,#290688,#290689); +#290687 = CARTESIAN_POINT('',(139.5,-120.,1.51)); +#290688 = DIRECTION('',(-0.,-0.,-1.)); +#290689 = DIRECTION('',(1.,0.,-0.)); +#290690 = ADVANCED_FACE('',(#290691,#290694),#290697,.F.); +#290691 = FACE_BOUND('',#290692,.F.); +#290692 = EDGE_LOOP('',(#290693)); +#290693 = ORIENTED_EDGE('',*,*,#290646,.T.); +#290694 = FACE_BOUND('',#290695,.T.); +#290695 = EDGE_LOOP('',(#290696)); +#290696 = ORIENTED_EDGE('',*,*,#290679,.T.); +#290697 = PLANE('',#290698); +#290698 = AXIS2_PLACEMENT_3D('',#290699,#290700,#290701); +#290699 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290700 = DIRECTION('',(0.,0.,1.)); +#290701 = DIRECTION('',(1.,0.,-0.)); +#290702 = ADVANCED_FACE('',(#290703,#290706),#290709,.T.); +#290703 = FACE_BOUND('',#290704,.T.); +#290704 = EDGE_LOOP('',(#290705)); +#290705 = ORIENTED_EDGE('',*,*,#290638,.T.); +#290706 = FACE_BOUND('',#290707,.F.); +#290707 = EDGE_LOOP('',(#290708)); +#290708 = ORIENTED_EDGE('',*,*,#290671,.T.); +#290709 = PLANE('',#290710); +#290710 = AXIS2_PLACEMENT_3D('',#290711,#290712,#290713); +#290711 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290712 = DIRECTION('',(0.,0.,1.)); +#290713 = DIRECTION('',(1.,0.,-0.)); +#290714 = MANIFOLD_SOLID_BREP('',#290715); +#290715 = CLOSED_SHELL('',(#290716,#290749,#290782,#290794)); +#290716 = ADVANCED_FACE('',(#290717),#290744,.T.); +#290717 = FACE_BOUND('',#290718,.F.); +#290718 = EDGE_LOOP('',(#290719,#290729,#290736,#290737)); +#290719 = ORIENTED_EDGE('',*,*,#290720,.T.); +#290720 = EDGE_CURVE('',#290721,#290723,#290725,.T.); +#290721 = VERTEX_POINT('',#290722); +#290722 = CARTESIAN_POINT('',(135.,-119.75,1.51)); +#290723 = VERTEX_POINT('',#290724); +#290724 = CARTESIAN_POINT('',(135.,-119.75,1.545)); +#290725 = LINE('',#290726,#290727); +#290726 = CARTESIAN_POINT('',(135.,-119.75,1.51)); +#290727 = VECTOR('',#290728,1.); +#290728 = DIRECTION('',(0.,0.,1.)); +#290729 = ORIENTED_EDGE('',*,*,#290730,.T.); +#290730 = EDGE_CURVE('',#290723,#290723,#290731,.T.); +#290731 = CIRCLE('',#290732,0.3); +#290732 = AXIS2_PLACEMENT_3D('',#290733,#290734,#290735); +#290733 = CARTESIAN_POINT('',(134.7,-119.75,1.545)); +#290734 = DIRECTION('',(0.,0.,1.)); +#290735 = DIRECTION('',(1.,0.,-0.)); +#290736 = ORIENTED_EDGE('',*,*,#290720,.F.); +#290737 = ORIENTED_EDGE('',*,*,#290738,.F.); +#290738 = EDGE_CURVE('',#290721,#290721,#290739,.T.); +#290739 = CIRCLE('',#290740,0.3); +#290740 = AXIS2_PLACEMENT_3D('',#290741,#290742,#290743); +#290741 = CARTESIAN_POINT('',(134.7,-119.75,1.51)); +#290742 = DIRECTION('',(0.,0.,1.)); +#290743 = DIRECTION('',(1.,0.,-0.)); +#290744 = CYLINDRICAL_SURFACE('',#290745,0.3); +#290745 = AXIS2_PLACEMENT_3D('',#290746,#290747,#290748); +#290746 = CARTESIAN_POINT('',(134.7,-119.75,1.51)); +#290747 = DIRECTION('',(-0.,-0.,-1.)); +#290748 = DIRECTION('',(1.,0.,-0.)); +#290749 = ADVANCED_FACE('',(#290750),#290777,.F.); +#290750 = FACE_BOUND('',#290751,.T.); +#290751 = EDGE_LOOP('',(#290752,#290762,#290769,#290770)); +#290752 = ORIENTED_EDGE('',*,*,#290753,.T.); +#290753 = EDGE_CURVE('',#290754,#290756,#290758,.T.); +#290754 = VERTEX_POINT('',#290755); +#290755 = CARTESIAN_POINT('',(134.837255,-119.75,1.51)); +#290756 = VERTEX_POINT('',#290757); +#290757 = CARTESIAN_POINT('',(134.837255,-119.75,1.545)); +#290758 = LINE('',#290759,#290760); +#290759 = CARTESIAN_POINT('',(134.837255,-119.75,1.51)); +#290760 = VECTOR('',#290761,1.); +#290761 = DIRECTION('',(0.,0.,1.)); +#290762 = ORIENTED_EDGE('',*,*,#290763,.T.); +#290763 = EDGE_CURVE('',#290756,#290756,#290764,.T.); +#290764 = CIRCLE('',#290765,0.137255); +#290765 = AXIS2_PLACEMENT_3D('',#290766,#290767,#290768); +#290766 = CARTESIAN_POINT('',(134.7,-119.75,1.545)); +#290767 = DIRECTION('',(0.,0.,1.)); +#290768 = DIRECTION('',(1.,0.,-0.)); +#290769 = ORIENTED_EDGE('',*,*,#290753,.F.); +#290770 = ORIENTED_EDGE('',*,*,#290771,.F.); +#290771 = EDGE_CURVE('',#290754,#290754,#290772,.T.); +#290772 = CIRCLE('',#290773,0.137255); +#290773 = AXIS2_PLACEMENT_3D('',#290774,#290775,#290776); +#290774 = CARTESIAN_POINT('',(134.7,-119.75,1.51)); +#290775 = DIRECTION('',(0.,0.,1.)); +#290776 = DIRECTION('',(1.,0.,-0.)); +#290777 = CYLINDRICAL_SURFACE('',#290778,0.137255); +#290778 = AXIS2_PLACEMENT_3D('',#290779,#290780,#290781); +#290779 = CARTESIAN_POINT('',(134.7,-119.75,1.51)); +#290780 = DIRECTION('',(-0.,-0.,-1.)); +#290781 = DIRECTION('',(1.,0.,-0.)); +#290782 = ADVANCED_FACE('',(#290783,#290786),#290789,.F.); +#290783 = FACE_BOUND('',#290784,.F.); +#290784 = EDGE_LOOP('',(#290785)); +#290785 = ORIENTED_EDGE('',*,*,#290738,.T.); +#290786 = FACE_BOUND('',#290787,.T.); +#290787 = EDGE_LOOP('',(#290788)); +#290788 = ORIENTED_EDGE('',*,*,#290771,.T.); +#290789 = PLANE('',#290790); +#290790 = AXIS2_PLACEMENT_3D('',#290791,#290792,#290793); +#290791 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290792 = DIRECTION('',(0.,0.,1.)); +#290793 = DIRECTION('',(1.,0.,-0.)); +#290794 = ADVANCED_FACE('',(#290795,#290798),#290801,.T.); +#290795 = FACE_BOUND('',#290796,.T.); +#290796 = EDGE_LOOP('',(#290797)); +#290797 = ORIENTED_EDGE('',*,*,#290730,.T.); +#290798 = FACE_BOUND('',#290799,.F.); +#290799 = EDGE_LOOP('',(#290800)); +#290800 = ORIENTED_EDGE('',*,*,#290763,.T.); +#290801 = PLANE('',#290802); +#290802 = AXIS2_PLACEMENT_3D('',#290803,#290804,#290805); +#290803 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290804 = DIRECTION('',(0.,0.,1.)); +#290805 = DIRECTION('',(1.,0.,-0.)); +#290806 = MANIFOLD_SOLID_BREP('',#290807); +#290807 = CLOSED_SHELL('',(#290808,#290841,#290874,#290886)); +#290808 = ADVANCED_FACE('',(#290809),#290836,.T.); +#290809 = FACE_BOUND('',#290810,.F.); +#290810 = EDGE_LOOP('',(#290811,#290821,#290828,#290829)); +#290811 = ORIENTED_EDGE('',*,*,#290812,.T.); +#290812 = EDGE_CURVE('',#290813,#290815,#290817,.T.); +#290813 = VERTEX_POINT('',#290814); +#290814 = CARTESIAN_POINT('',(129.3,-119.,1.51)); +#290815 = VERTEX_POINT('',#290816); +#290816 = CARTESIAN_POINT('',(129.3,-119.,1.545)); +#290817 = LINE('',#290818,#290819); +#290818 = CARTESIAN_POINT('',(129.3,-119.,1.51)); +#290819 = VECTOR('',#290820,1.); +#290820 = DIRECTION('',(0.,0.,1.)); +#290821 = ORIENTED_EDGE('',*,*,#290822,.T.); +#290822 = EDGE_CURVE('',#290815,#290815,#290823,.T.); +#290823 = CIRCLE('',#290824,0.3); +#290824 = AXIS2_PLACEMENT_3D('',#290825,#290826,#290827); +#290825 = CARTESIAN_POINT('',(129.,-119.,1.545)); +#290826 = DIRECTION('',(0.,0.,1.)); +#290827 = DIRECTION('',(1.,0.,-0.)); +#290828 = ORIENTED_EDGE('',*,*,#290812,.F.); +#290829 = ORIENTED_EDGE('',*,*,#290830,.F.); +#290830 = EDGE_CURVE('',#290813,#290813,#290831,.T.); +#290831 = CIRCLE('',#290832,0.3); +#290832 = AXIS2_PLACEMENT_3D('',#290833,#290834,#290835); +#290833 = CARTESIAN_POINT('',(129.,-119.,1.51)); +#290834 = DIRECTION('',(0.,0.,1.)); +#290835 = DIRECTION('',(1.,0.,-0.)); +#290836 = CYLINDRICAL_SURFACE('',#290837,0.3); +#290837 = AXIS2_PLACEMENT_3D('',#290838,#290839,#290840); +#290838 = CARTESIAN_POINT('',(129.,-119.,1.51)); +#290839 = DIRECTION('',(-0.,-0.,-1.)); +#290840 = DIRECTION('',(1.,0.,-0.)); +#290841 = ADVANCED_FACE('',(#290842),#290869,.F.); +#290842 = FACE_BOUND('',#290843,.T.); +#290843 = EDGE_LOOP('',(#290844,#290854,#290861,#290862)); +#290844 = ORIENTED_EDGE('',*,*,#290845,.T.); +#290845 = EDGE_CURVE('',#290846,#290848,#290850,.T.); +#290846 = VERTEX_POINT('',#290847); +#290847 = CARTESIAN_POINT('',(129.137255,-119.,1.51)); +#290848 = VERTEX_POINT('',#290849); +#290849 = CARTESIAN_POINT('',(129.137255,-119.,1.545)); +#290850 = LINE('',#290851,#290852); +#290851 = CARTESIAN_POINT('',(129.137255,-119.,1.51)); +#290852 = VECTOR('',#290853,1.); +#290853 = DIRECTION('',(0.,0.,1.)); +#290854 = ORIENTED_EDGE('',*,*,#290855,.T.); +#290855 = EDGE_CURVE('',#290848,#290848,#290856,.T.); +#290856 = CIRCLE('',#290857,0.137255); +#290857 = AXIS2_PLACEMENT_3D('',#290858,#290859,#290860); +#290858 = CARTESIAN_POINT('',(129.,-119.,1.545)); +#290859 = DIRECTION('',(0.,0.,1.)); +#290860 = DIRECTION('',(1.,0.,-0.)); +#290861 = ORIENTED_EDGE('',*,*,#290845,.F.); +#290862 = ORIENTED_EDGE('',*,*,#290863,.F.); +#290863 = EDGE_CURVE('',#290846,#290846,#290864,.T.); +#290864 = CIRCLE('',#290865,0.137255); +#290865 = AXIS2_PLACEMENT_3D('',#290866,#290867,#290868); +#290866 = CARTESIAN_POINT('',(129.,-119.,1.51)); +#290867 = DIRECTION('',(0.,0.,1.)); +#290868 = DIRECTION('',(1.,0.,-0.)); +#290869 = CYLINDRICAL_SURFACE('',#290870,0.137255); +#290870 = AXIS2_PLACEMENT_3D('',#290871,#290872,#290873); +#290871 = CARTESIAN_POINT('',(129.,-119.,1.51)); +#290872 = DIRECTION('',(-0.,-0.,-1.)); +#290873 = DIRECTION('',(1.,0.,-0.)); +#290874 = ADVANCED_FACE('',(#290875,#290878),#290881,.F.); +#290875 = FACE_BOUND('',#290876,.F.); +#290876 = EDGE_LOOP('',(#290877)); +#290877 = ORIENTED_EDGE('',*,*,#290830,.T.); +#290878 = FACE_BOUND('',#290879,.T.); +#290879 = EDGE_LOOP('',(#290880)); +#290880 = ORIENTED_EDGE('',*,*,#290863,.T.); +#290881 = PLANE('',#290882); +#290882 = AXIS2_PLACEMENT_3D('',#290883,#290884,#290885); +#290883 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290884 = DIRECTION('',(0.,0.,1.)); +#290885 = DIRECTION('',(1.,0.,-0.)); +#290886 = ADVANCED_FACE('',(#290887,#290890),#290893,.T.); +#290887 = FACE_BOUND('',#290888,.T.); +#290888 = EDGE_LOOP('',(#290889)); +#290889 = ORIENTED_EDGE('',*,*,#290822,.T.); +#290890 = FACE_BOUND('',#290891,.F.); +#290891 = EDGE_LOOP('',(#290892)); +#290892 = ORIENTED_EDGE('',*,*,#290855,.T.); +#290893 = PLANE('',#290894); +#290894 = AXIS2_PLACEMENT_3D('',#290895,#290896,#290897); +#290895 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290896 = DIRECTION('',(0.,0.,1.)); +#290897 = DIRECTION('',(1.,0.,-0.)); +#290898 = MANIFOLD_SOLID_BREP('',#290899); +#290899 = CLOSED_SHELL('',(#290900,#290933,#290966,#290978)); +#290900 = ADVANCED_FACE('',(#290901),#290928,.T.); +#290901 = FACE_BOUND('',#290902,.F.); +#290902 = EDGE_LOOP('',(#290903,#290913,#290920,#290921)); +#290903 = ORIENTED_EDGE('',*,*,#290904,.T.); +#290904 = EDGE_CURVE('',#290905,#290907,#290909,.T.); +#290905 = VERTEX_POINT('',#290906); +#290906 = CARTESIAN_POINT('',(137.3,-119.,1.51)); +#290907 = VERTEX_POINT('',#290908); +#290908 = CARTESIAN_POINT('',(137.3,-119.,1.545)); +#290909 = LINE('',#290910,#290911); +#290910 = CARTESIAN_POINT('',(137.3,-119.,1.51)); +#290911 = VECTOR('',#290912,1.); +#290912 = DIRECTION('',(0.,0.,1.)); +#290913 = ORIENTED_EDGE('',*,*,#290914,.T.); +#290914 = EDGE_CURVE('',#290907,#290907,#290915,.T.); +#290915 = CIRCLE('',#290916,0.3); +#290916 = AXIS2_PLACEMENT_3D('',#290917,#290918,#290919); +#290917 = CARTESIAN_POINT('',(137.,-119.,1.545)); +#290918 = DIRECTION('',(0.,0.,1.)); +#290919 = DIRECTION('',(1.,0.,-0.)); +#290920 = ORIENTED_EDGE('',*,*,#290904,.F.); +#290921 = ORIENTED_EDGE('',*,*,#290922,.F.); +#290922 = EDGE_CURVE('',#290905,#290905,#290923,.T.); +#290923 = CIRCLE('',#290924,0.3); +#290924 = AXIS2_PLACEMENT_3D('',#290925,#290926,#290927); +#290925 = CARTESIAN_POINT('',(137.,-119.,1.51)); +#290926 = DIRECTION('',(0.,0.,1.)); +#290927 = DIRECTION('',(1.,0.,-0.)); +#290928 = CYLINDRICAL_SURFACE('',#290929,0.3); +#290929 = AXIS2_PLACEMENT_3D('',#290930,#290931,#290932); +#290930 = CARTESIAN_POINT('',(137.,-119.,1.51)); +#290931 = DIRECTION('',(-0.,-0.,-1.)); +#290932 = DIRECTION('',(1.,0.,-0.)); +#290933 = ADVANCED_FACE('',(#290934),#290961,.F.); +#290934 = FACE_BOUND('',#290935,.T.); +#290935 = EDGE_LOOP('',(#290936,#290946,#290953,#290954)); +#290936 = ORIENTED_EDGE('',*,*,#290937,.T.); +#290937 = EDGE_CURVE('',#290938,#290940,#290942,.T.); +#290938 = VERTEX_POINT('',#290939); +#290939 = CARTESIAN_POINT('',(137.137255,-119.,1.51)); +#290940 = VERTEX_POINT('',#290941); +#290941 = CARTESIAN_POINT('',(137.137255,-119.,1.545)); +#290942 = LINE('',#290943,#290944); +#290943 = CARTESIAN_POINT('',(137.137255,-119.,1.51)); +#290944 = VECTOR('',#290945,1.); +#290945 = DIRECTION('',(0.,0.,1.)); +#290946 = ORIENTED_EDGE('',*,*,#290947,.T.); +#290947 = EDGE_CURVE('',#290940,#290940,#290948,.T.); +#290948 = CIRCLE('',#290949,0.137255); +#290949 = AXIS2_PLACEMENT_3D('',#290950,#290951,#290952); +#290950 = CARTESIAN_POINT('',(137.,-119.,1.545)); +#290951 = DIRECTION('',(0.,0.,1.)); +#290952 = DIRECTION('',(1.,0.,-0.)); +#290953 = ORIENTED_EDGE('',*,*,#290937,.F.); +#290954 = ORIENTED_EDGE('',*,*,#290955,.F.); +#290955 = EDGE_CURVE('',#290938,#290938,#290956,.T.); +#290956 = CIRCLE('',#290957,0.137255); +#290957 = AXIS2_PLACEMENT_3D('',#290958,#290959,#290960); +#290958 = CARTESIAN_POINT('',(137.,-119.,1.51)); +#290959 = DIRECTION('',(0.,0.,1.)); +#290960 = DIRECTION('',(1.,0.,-0.)); +#290961 = CYLINDRICAL_SURFACE('',#290962,0.137255); +#290962 = AXIS2_PLACEMENT_3D('',#290963,#290964,#290965); +#290963 = CARTESIAN_POINT('',(137.,-119.,1.51)); +#290964 = DIRECTION('',(-0.,-0.,-1.)); +#290965 = DIRECTION('',(1.,0.,-0.)); +#290966 = ADVANCED_FACE('',(#290967,#290970),#290973,.F.); +#290967 = FACE_BOUND('',#290968,.F.); +#290968 = EDGE_LOOP('',(#290969)); +#290969 = ORIENTED_EDGE('',*,*,#290922,.T.); +#290970 = FACE_BOUND('',#290971,.T.); +#290971 = EDGE_LOOP('',(#290972)); +#290972 = ORIENTED_EDGE('',*,*,#290955,.T.); +#290973 = PLANE('',#290974); +#290974 = AXIS2_PLACEMENT_3D('',#290975,#290976,#290977); +#290975 = CARTESIAN_POINT('',(0.,0.,1.51)); +#290976 = DIRECTION('',(0.,0.,1.)); +#290977 = DIRECTION('',(1.,0.,-0.)); +#290978 = ADVANCED_FACE('',(#290979,#290982),#290985,.T.); +#290979 = FACE_BOUND('',#290980,.T.); +#290980 = EDGE_LOOP('',(#290981)); +#290981 = ORIENTED_EDGE('',*,*,#290914,.T.); +#290982 = FACE_BOUND('',#290983,.F.); +#290983 = EDGE_LOOP('',(#290984)); +#290984 = ORIENTED_EDGE('',*,*,#290947,.T.); +#290985 = PLANE('',#290986); +#290986 = AXIS2_PLACEMENT_3D('',#290987,#290988,#290989); +#290987 = CARTESIAN_POINT('',(0.,0.,1.545)); +#290988 = DIRECTION('',(0.,0.,1.)); +#290989 = DIRECTION('',(1.,0.,-0.)); +#290990 = MANIFOLD_SOLID_BREP('',#290991); +#290991 = CLOSED_SHELL('',(#290992,#291025,#291058,#291070)); +#290992 = ADVANCED_FACE('',(#290993),#291020,.T.); +#290993 = FACE_BOUND('',#290994,.F.); +#290994 = EDGE_LOOP('',(#290995,#291005,#291012,#291013)); +#290995 = ORIENTED_EDGE('',*,*,#290996,.T.); +#290996 = EDGE_CURVE('',#290997,#290999,#291001,.T.); +#290997 = VERTEX_POINT('',#290998); +#290998 = CARTESIAN_POINT('',(147.8,-119.,1.51)); +#290999 = VERTEX_POINT('',#291000); +#291000 = CARTESIAN_POINT('',(147.8,-119.,1.545)); +#291001 = LINE('',#291002,#291003); +#291002 = CARTESIAN_POINT('',(147.8,-119.,1.51)); +#291003 = VECTOR('',#291004,1.); +#291004 = DIRECTION('',(0.,0.,1.)); +#291005 = ORIENTED_EDGE('',*,*,#291006,.T.); +#291006 = EDGE_CURVE('',#290999,#290999,#291007,.T.); +#291007 = CIRCLE('',#291008,0.3); +#291008 = AXIS2_PLACEMENT_3D('',#291009,#291010,#291011); +#291009 = CARTESIAN_POINT('',(147.5,-119.,1.545)); +#291010 = DIRECTION('',(0.,0.,1.)); +#291011 = DIRECTION('',(1.,0.,-0.)); +#291012 = ORIENTED_EDGE('',*,*,#290996,.F.); +#291013 = ORIENTED_EDGE('',*,*,#291014,.F.); +#291014 = EDGE_CURVE('',#290997,#290997,#291015,.T.); +#291015 = CIRCLE('',#291016,0.3); +#291016 = AXIS2_PLACEMENT_3D('',#291017,#291018,#291019); +#291017 = CARTESIAN_POINT('',(147.5,-119.,1.51)); +#291018 = DIRECTION('',(0.,0.,1.)); +#291019 = DIRECTION('',(1.,0.,-0.)); +#291020 = CYLINDRICAL_SURFACE('',#291021,0.3); +#291021 = AXIS2_PLACEMENT_3D('',#291022,#291023,#291024); +#291022 = CARTESIAN_POINT('',(147.5,-119.,1.51)); +#291023 = DIRECTION('',(-0.,-0.,-1.)); +#291024 = DIRECTION('',(1.,0.,-0.)); +#291025 = ADVANCED_FACE('',(#291026),#291053,.F.); +#291026 = FACE_BOUND('',#291027,.T.); +#291027 = EDGE_LOOP('',(#291028,#291038,#291045,#291046)); +#291028 = ORIENTED_EDGE('',*,*,#291029,.T.); +#291029 = EDGE_CURVE('',#291030,#291032,#291034,.T.); +#291030 = VERTEX_POINT('',#291031); +#291031 = CARTESIAN_POINT('',(147.637255,-119.,1.51)); +#291032 = VERTEX_POINT('',#291033); +#291033 = CARTESIAN_POINT('',(147.637255,-119.,1.545)); +#291034 = LINE('',#291035,#291036); +#291035 = CARTESIAN_POINT('',(147.637255,-119.,1.51)); +#291036 = VECTOR('',#291037,1.); +#291037 = DIRECTION('',(0.,0.,1.)); +#291038 = ORIENTED_EDGE('',*,*,#291039,.T.); +#291039 = EDGE_CURVE('',#291032,#291032,#291040,.T.); +#291040 = CIRCLE('',#291041,0.137255); +#291041 = AXIS2_PLACEMENT_3D('',#291042,#291043,#291044); +#291042 = CARTESIAN_POINT('',(147.5,-119.,1.545)); +#291043 = DIRECTION('',(0.,0.,1.)); +#291044 = DIRECTION('',(1.,0.,-0.)); +#291045 = ORIENTED_EDGE('',*,*,#291029,.F.); +#291046 = ORIENTED_EDGE('',*,*,#291047,.F.); +#291047 = EDGE_CURVE('',#291030,#291030,#291048,.T.); +#291048 = CIRCLE('',#291049,0.137255); +#291049 = AXIS2_PLACEMENT_3D('',#291050,#291051,#291052); +#291050 = CARTESIAN_POINT('',(147.5,-119.,1.51)); +#291051 = DIRECTION('',(0.,0.,1.)); +#291052 = DIRECTION('',(1.,0.,-0.)); +#291053 = CYLINDRICAL_SURFACE('',#291054,0.137255); +#291054 = AXIS2_PLACEMENT_3D('',#291055,#291056,#291057); +#291055 = CARTESIAN_POINT('',(147.5,-119.,1.51)); +#291056 = DIRECTION('',(-0.,-0.,-1.)); +#291057 = DIRECTION('',(1.,0.,-0.)); +#291058 = ADVANCED_FACE('',(#291059,#291062),#291065,.F.); +#291059 = FACE_BOUND('',#291060,.F.); +#291060 = EDGE_LOOP('',(#291061)); +#291061 = ORIENTED_EDGE('',*,*,#291014,.T.); +#291062 = FACE_BOUND('',#291063,.T.); +#291063 = EDGE_LOOP('',(#291064)); +#291064 = ORIENTED_EDGE('',*,*,#291047,.T.); +#291065 = PLANE('',#291066); +#291066 = AXIS2_PLACEMENT_3D('',#291067,#291068,#291069); +#291067 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291068 = DIRECTION('',(0.,0.,1.)); +#291069 = DIRECTION('',(1.,0.,-0.)); +#291070 = ADVANCED_FACE('',(#291071,#291074),#291077,.T.); +#291071 = FACE_BOUND('',#291072,.T.); +#291072 = EDGE_LOOP('',(#291073)); +#291073 = ORIENTED_EDGE('',*,*,#291006,.T.); +#291074 = FACE_BOUND('',#291075,.F.); +#291075 = EDGE_LOOP('',(#291076)); +#291076 = ORIENTED_EDGE('',*,*,#291039,.T.); +#291077 = PLANE('',#291078); +#291078 = AXIS2_PLACEMENT_3D('',#291079,#291080,#291081); +#291079 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291080 = DIRECTION('',(0.,0.,1.)); +#291081 = DIRECTION('',(1.,0.,-0.)); +#291082 = MANIFOLD_SOLID_BREP('',#291083); +#291083 = CLOSED_SHELL('',(#291084,#291117,#291150,#291162)); +#291084 = ADVANCED_FACE('',(#291085),#291112,.T.); +#291085 = FACE_BOUND('',#291086,.F.); +#291086 = EDGE_LOOP('',(#291087,#291097,#291104,#291105)); +#291087 = ORIENTED_EDGE('',*,*,#291088,.T.); +#291088 = EDGE_CURVE('',#291089,#291091,#291093,.T.); +#291089 = VERTEX_POINT('',#291090); +#291090 = CARTESIAN_POINT('',(139.8,-118.5,1.51)); +#291091 = VERTEX_POINT('',#291092); +#291092 = CARTESIAN_POINT('',(139.8,-118.5,1.545)); +#291093 = LINE('',#291094,#291095); +#291094 = CARTESIAN_POINT('',(139.8,-118.5,1.51)); +#291095 = VECTOR('',#291096,1.); +#291096 = DIRECTION('',(0.,0.,1.)); +#291097 = ORIENTED_EDGE('',*,*,#291098,.T.); +#291098 = EDGE_CURVE('',#291091,#291091,#291099,.T.); +#291099 = CIRCLE('',#291100,0.3); +#291100 = AXIS2_PLACEMENT_3D('',#291101,#291102,#291103); +#291101 = CARTESIAN_POINT('',(139.5,-118.5,1.545)); +#291102 = DIRECTION('',(0.,0.,1.)); +#291103 = DIRECTION('',(1.,0.,-0.)); +#291104 = ORIENTED_EDGE('',*,*,#291088,.F.); +#291105 = ORIENTED_EDGE('',*,*,#291106,.F.); +#291106 = EDGE_CURVE('',#291089,#291089,#291107,.T.); +#291107 = CIRCLE('',#291108,0.3); +#291108 = AXIS2_PLACEMENT_3D('',#291109,#291110,#291111); +#291109 = CARTESIAN_POINT('',(139.5,-118.5,1.51)); +#291110 = DIRECTION('',(0.,0.,1.)); +#291111 = DIRECTION('',(1.,0.,-0.)); +#291112 = CYLINDRICAL_SURFACE('',#291113,0.3); +#291113 = AXIS2_PLACEMENT_3D('',#291114,#291115,#291116); +#291114 = CARTESIAN_POINT('',(139.5,-118.5,1.51)); +#291115 = DIRECTION('',(-0.,-0.,-1.)); +#291116 = DIRECTION('',(1.,0.,-0.)); +#291117 = ADVANCED_FACE('',(#291118),#291145,.F.); +#291118 = FACE_BOUND('',#291119,.T.); +#291119 = EDGE_LOOP('',(#291120,#291130,#291137,#291138)); +#291120 = ORIENTED_EDGE('',*,*,#291121,.T.); +#291121 = EDGE_CURVE('',#291122,#291124,#291126,.T.); +#291122 = VERTEX_POINT('',#291123); +#291123 = CARTESIAN_POINT('',(139.637255,-118.5,1.51)); +#291124 = VERTEX_POINT('',#291125); +#291125 = CARTESIAN_POINT('',(139.637255,-118.5,1.545)); +#291126 = LINE('',#291127,#291128); +#291127 = CARTESIAN_POINT('',(139.637255,-118.5,1.51)); +#291128 = VECTOR('',#291129,1.); +#291129 = DIRECTION('',(0.,0.,1.)); +#291130 = ORIENTED_EDGE('',*,*,#291131,.T.); +#291131 = EDGE_CURVE('',#291124,#291124,#291132,.T.); +#291132 = CIRCLE('',#291133,0.137255); +#291133 = AXIS2_PLACEMENT_3D('',#291134,#291135,#291136); +#291134 = CARTESIAN_POINT('',(139.5,-118.5,1.545)); +#291135 = DIRECTION('',(0.,0.,1.)); +#291136 = DIRECTION('',(1.,0.,-0.)); +#291137 = ORIENTED_EDGE('',*,*,#291121,.F.); +#291138 = ORIENTED_EDGE('',*,*,#291139,.F.); +#291139 = EDGE_CURVE('',#291122,#291122,#291140,.T.); +#291140 = CIRCLE('',#291141,0.137255); +#291141 = AXIS2_PLACEMENT_3D('',#291142,#291143,#291144); +#291142 = CARTESIAN_POINT('',(139.5,-118.5,1.51)); +#291143 = DIRECTION('',(0.,0.,1.)); +#291144 = DIRECTION('',(1.,0.,-0.)); +#291145 = CYLINDRICAL_SURFACE('',#291146,0.137255); +#291146 = AXIS2_PLACEMENT_3D('',#291147,#291148,#291149); +#291147 = CARTESIAN_POINT('',(139.5,-118.5,1.51)); +#291148 = DIRECTION('',(-0.,-0.,-1.)); +#291149 = DIRECTION('',(1.,0.,-0.)); +#291150 = ADVANCED_FACE('',(#291151,#291154),#291157,.F.); +#291151 = FACE_BOUND('',#291152,.F.); +#291152 = EDGE_LOOP('',(#291153)); +#291153 = ORIENTED_EDGE('',*,*,#291106,.T.); +#291154 = FACE_BOUND('',#291155,.T.); +#291155 = EDGE_LOOP('',(#291156)); +#291156 = ORIENTED_EDGE('',*,*,#291139,.T.); +#291157 = PLANE('',#291158); +#291158 = AXIS2_PLACEMENT_3D('',#291159,#291160,#291161); +#291159 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291160 = DIRECTION('',(0.,0.,1.)); +#291161 = DIRECTION('',(1.,0.,-0.)); +#291162 = ADVANCED_FACE('',(#291163,#291166),#291169,.T.); +#291163 = FACE_BOUND('',#291164,.T.); +#291164 = EDGE_LOOP('',(#291165)); +#291165 = ORIENTED_EDGE('',*,*,#291098,.T.); +#291166 = FACE_BOUND('',#291167,.F.); +#291167 = EDGE_LOOP('',(#291168)); +#291168 = ORIENTED_EDGE('',*,*,#291131,.T.); +#291169 = PLANE('',#291170); +#291170 = AXIS2_PLACEMENT_3D('',#291171,#291172,#291173); +#291171 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291172 = DIRECTION('',(0.,0.,1.)); +#291173 = DIRECTION('',(1.,0.,-0.)); +#291174 = MANIFOLD_SOLID_BREP('',#291175); +#291175 = CLOSED_SHELL('',(#291176,#291209,#291242,#291254)); +#291176 = ADVANCED_FACE('',(#291177),#291204,.T.); +#291177 = FACE_BOUND('',#291178,.F.); +#291178 = EDGE_LOOP('',(#291179,#291189,#291196,#291197)); +#291179 = ORIENTED_EDGE('',*,*,#291180,.T.); +#291180 = EDGE_CURVE('',#291181,#291183,#291185,.T.); +#291181 = VERTEX_POINT('',#291182); +#291182 = CARTESIAN_POINT('',(125.3,-118.,1.51)); +#291183 = VERTEX_POINT('',#291184); +#291184 = CARTESIAN_POINT('',(125.3,-118.,1.545)); +#291185 = LINE('',#291186,#291187); +#291186 = CARTESIAN_POINT('',(125.3,-118.,1.51)); +#291187 = VECTOR('',#291188,1.); +#291188 = DIRECTION('',(0.,0.,1.)); +#291189 = ORIENTED_EDGE('',*,*,#291190,.T.); +#291190 = EDGE_CURVE('',#291183,#291183,#291191,.T.); +#291191 = CIRCLE('',#291192,0.3); +#291192 = AXIS2_PLACEMENT_3D('',#291193,#291194,#291195); +#291193 = CARTESIAN_POINT('',(125.,-118.,1.545)); +#291194 = DIRECTION('',(0.,0.,1.)); +#291195 = DIRECTION('',(1.,0.,-0.)); +#291196 = ORIENTED_EDGE('',*,*,#291180,.F.); +#291197 = ORIENTED_EDGE('',*,*,#291198,.F.); +#291198 = EDGE_CURVE('',#291181,#291181,#291199,.T.); +#291199 = CIRCLE('',#291200,0.3); +#291200 = AXIS2_PLACEMENT_3D('',#291201,#291202,#291203); +#291201 = CARTESIAN_POINT('',(125.,-118.,1.51)); +#291202 = DIRECTION('',(0.,0.,1.)); +#291203 = DIRECTION('',(1.,0.,-0.)); +#291204 = CYLINDRICAL_SURFACE('',#291205,0.3); +#291205 = AXIS2_PLACEMENT_3D('',#291206,#291207,#291208); +#291206 = CARTESIAN_POINT('',(125.,-118.,1.51)); +#291207 = DIRECTION('',(-0.,-0.,-1.)); +#291208 = DIRECTION('',(1.,0.,-0.)); +#291209 = ADVANCED_FACE('',(#291210),#291237,.F.); +#291210 = FACE_BOUND('',#291211,.T.); +#291211 = EDGE_LOOP('',(#291212,#291222,#291229,#291230)); +#291212 = ORIENTED_EDGE('',*,*,#291213,.T.); +#291213 = EDGE_CURVE('',#291214,#291216,#291218,.T.); +#291214 = VERTEX_POINT('',#291215); +#291215 = CARTESIAN_POINT('',(125.137255,-118.,1.51)); +#291216 = VERTEX_POINT('',#291217); +#291217 = CARTESIAN_POINT('',(125.137255,-118.,1.545)); +#291218 = LINE('',#291219,#291220); +#291219 = CARTESIAN_POINT('',(125.137255,-118.,1.51)); +#291220 = VECTOR('',#291221,1.); +#291221 = DIRECTION('',(0.,0.,1.)); +#291222 = ORIENTED_EDGE('',*,*,#291223,.T.); +#291223 = EDGE_CURVE('',#291216,#291216,#291224,.T.); +#291224 = CIRCLE('',#291225,0.137255); +#291225 = AXIS2_PLACEMENT_3D('',#291226,#291227,#291228); +#291226 = CARTESIAN_POINT('',(125.,-118.,1.545)); +#291227 = DIRECTION('',(0.,0.,1.)); +#291228 = DIRECTION('',(1.,0.,-0.)); +#291229 = ORIENTED_EDGE('',*,*,#291213,.F.); +#291230 = ORIENTED_EDGE('',*,*,#291231,.F.); +#291231 = EDGE_CURVE('',#291214,#291214,#291232,.T.); +#291232 = CIRCLE('',#291233,0.137255); +#291233 = AXIS2_PLACEMENT_3D('',#291234,#291235,#291236); +#291234 = CARTESIAN_POINT('',(125.,-118.,1.51)); +#291235 = DIRECTION('',(0.,0.,1.)); +#291236 = DIRECTION('',(1.,0.,-0.)); +#291237 = CYLINDRICAL_SURFACE('',#291238,0.137255); +#291238 = AXIS2_PLACEMENT_3D('',#291239,#291240,#291241); +#291239 = CARTESIAN_POINT('',(125.,-118.,1.51)); +#291240 = DIRECTION('',(-0.,-0.,-1.)); +#291241 = DIRECTION('',(1.,0.,-0.)); +#291242 = ADVANCED_FACE('',(#291243,#291246),#291249,.F.); +#291243 = FACE_BOUND('',#291244,.F.); +#291244 = EDGE_LOOP('',(#291245)); +#291245 = ORIENTED_EDGE('',*,*,#291198,.T.); +#291246 = FACE_BOUND('',#291247,.T.); +#291247 = EDGE_LOOP('',(#291248)); +#291248 = ORIENTED_EDGE('',*,*,#291231,.T.); +#291249 = PLANE('',#291250); +#291250 = AXIS2_PLACEMENT_3D('',#291251,#291252,#291253); +#291251 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291252 = DIRECTION('',(0.,0.,1.)); +#291253 = DIRECTION('',(1.,0.,-0.)); +#291254 = ADVANCED_FACE('',(#291255,#291258),#291261,.T.); +#291255 = FACE_BOUND('',#291256,.T.); +#291256 = EDGE_LOOP('',(#291257)); +#291257 = ORIENTED_EDGE('',*,*,#291190,.T.); +#291258 = FACE_BOUND('',#291259,.F.); +#291259 = EDGE_LOOP('',(#291260)); +#291260 = ORIENTED_EDGE('',*,*,#291223,.T.); +#291261 = PLANE('',#291262); +#291262 = AXIS2_PLACEMENT_3D('',#291263,#291264,#291265); +#291263 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291264 = DIRECTION('',(0.,0.,1.)); +#291265 = DIRECTION('',(1.,0.,-0.)); +#291266 = MANIFOLD_SOLID_BREP('',#291267); +#291267 = CLOSED_SHELL('',(#291268,#291301,#291334,#291346)); +#291268 = ADVANCED_FACE('',(#291269),#291296,.T.); +#291269 = FACE_BOUND('',#291270,.F.); +#291270 = EDGE_LOOP('',(#291271,#291281,#291288,#291289)); +#291271 = ORIENTED_EDGE('',*,*,#291272,.T.); +#291272 = EDGE_CURVE('',#291273,#291275,#291277,.T.); +#291273 = VERTEX_POINT('',#291274); +#291274 = CARTESIAN_POINT('',(133.320634,-117.7,1.51)); +#291275 = VERTEX_POINT('',#291276); +#291276 = CARTESIAN_POINT('',(133.320634,-117.7,1.545)); +#291277 = LINE('',#291278,#291279); +#291278 = CARTESIAN_POINT('',(133.320634,-117.7,1.51)); +#291279 = VECTOR('',#291280,1.); +#291280 = DIRECTION('',(0.,0.,1.)); +#291281 = ORIENTED_EDGE('',*,*,#291282,.T.); +#291282 = EDGE_CURVE('',#291275,#291275,#291283,.T.); +#291283 = CIRCLE('',#291284,0.3); +#291284 = AXIS2_PLACEMENT_3D('',#291285,#291286,#291287); +#291285 = CARTESIAN_POINT('',(133.020634,-117.7,1.545)); +#291286 = DIRECTION('',(0.,0.,1.)); +#291287 = DIRECTION('',(1.,0.,-0.)); +#291288 = ORIENTED_EDGE('',*,*,#291272,.F.); +#291289 = ORIENTED_EDGE('',*,*,#291290,.F.); +#291290 = EDGE_CURVE('',#291273,#291273,#291291,.T.); +#291291 = CIRCLE('',#291292,0.3); +#291292 = AXIS2_PLACEMENT_3D('',#291293,#291294,#291295); +#291293 = CARTESIAN_POINT('',(133.020634,-117.7,1.51)); +#291294 = DIRECTION('',(0.,0.,1.)); +#291295 = DIRECTION('',(1.,0.,-0.)); +#291296 = CYLINDRICAL_SURFACE('',#291297,0.3); +#291297 = AXIS2_PLACEMENT_3D('',#291298,#291299,#291300); +#291298 = CARTESIAN_POINT('',(133.020634,-117.7,1.51)); +#291299 = DIRECTION('',(-0.,-0.,-1.)); +#291300 = DIRECTION('',(1.,0.,-0.)); +#291301 = ADVANCED_FACE('',(#291302),#291329,.F.); +#291302 = FACE_BOUND('',#291303,.T.); +#291303 = EDGE_LOOP('',(#291304,#291314,#291321,#291322)); +#291304 = ORIENTED_EDGE('',*,*,#291305,.T.); +#291305 = EDGE_CURVE('',#291306,#291308,#291310,.T.); +#291306 = VERTEX_POINT('',#291307); +#291307 = CARTESIAN_POINT('',(133.157889,-117.7,1.51)); +#291308 = VERTEX_POINT('',#291309); +#291309 = CARTESIAN_POINT('',(133.157889,-117.7,1.545)); +#291310 = LINE('',#291311,#291312); +#291311 = CARTESIAN_POINT('',(133.157889,-117.7,1.51)); +#291312 = VECTOR('',#291313,1.); +#291313 = DIRECTION('',(0.,0.,1.)); +#291314 = ORIENTED_EDGE('',*,*,#291315,.T.); +#291315 = EDGE_CURVE('',#291308,#291308,#291316,.T.); +#291316 = CIRCLE('',#291317,0.137255); +#291317 = AXIS2_PLACEMENT_3D('',#291318,#291319,#291320); +#291318 = CARTESIAN_POINT('',(133.020634,-117.7,1.545)); +#291319 = DIRECTION('',(0.,0.,1.)); +#291320 = DIRECTION('',(1.,0.,-0.)); +#291321 = ORIENTED_EDGE('',*,*,#291305,.F.); +#291322 = ORIENTED_EDGE('',*,*,#291323,.F.); +#291323 = EDGE_CURVE('',#291306,#291306,#291324,.T.); +#291324 = CIRCLE('',#291325,0.137255); +#291325 = AXIS2_PLACEMENT_3D('',#291326,#291327,#291328); +#291326 = CARTESIAN_POINT('',(133.020634,-117.7,1.51)); +#291327 = DIRECTION('',(0.,0.,1.)); +#291328 = DIRECTION('',(1.,0.,-0.)); +#291329 = CYLINDRICAL_SURFACE('',#291330,0.137255); +#291330 = AXIS2_PLACEMENT_3D('',#291331,#291332,#291333); +#291331 = CARTESIAN_POINT('',(133.020634,-117.7,1.51)); +#291332 = DIRECTION('',(-0.,-0.,-1.)); +#291333 = DIRECTION('',(1.,0.,-0.)); +#291334 = ADVANCED_FACE('',(#291335,#291338),#291341,.F.); +#291335 = FACE_BOUND('',#291336,.F.); +#291336 = EDGE_LOOP('',(#291337)); +#291337 = ORIENTED_EDGE('',*,*,#291290,.T.); +#291338 = FACE_BOUND('',#291339,.T.); +#291339 = EDGE_LOOP('',(#291340)); +#291340 = ORIENTED_EDGE('',*,*,#291323,.T.); +#291341 = PLANE('',#291342); +#291342 = AXIS2_PLACEMENT_3D('',#291343,#291344,#291345); +#291343 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291344 = DIRECTION('',(0.,0.,1.)); +#291345 = DIRECTION('',(1.,0.,-0.)); +#291346 = ADVANCED_FACE('',(#291347,#291350),#291353,.T.); +#291347 = FACE_BOUND('',#291348,.T.); +#291348 = EDGE_LOOP('',(#291349)); +#291349 = ORIENTED_EDGE('',*,*,#291282,.T.); +#291350 = FACE_BOUND('',#291351,.F.); +#291351 = EDGE_LOOP('',(#291352)); +#291352 = ORIENTED_EDGE('',*,*,#291315,.T.); +#291353 = PLANE('',#291354); +#291354 = AXIS2_PLACEMENT_3D('',#291355,#291356,#291357); +#291355 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291356 = DIRECTION('',(0.,0.,1.)); +#291357 = DIRECTION('',(1.,0.,-0.)); +#291358 = MANIFOLD_SOLID_BREP('',#291359); +#291359 = CLOSED_SHELL('',(#291360,#291393,#291426,#291438)); +#291360 = ADVANCED_FACE('',(#291361),#291388,.T.); +#291361 = FACE_BOUND('',#291362,.F.); +#291362 = EDGE_LOOP('',(#291363,#291373,#291380,#291381)); +#291363 = ORIENTED_EDGE('',*,*,#291364,.T.); +#291364 = EDGE_CURVE('',#291365,#291367,#291369,.T.); +#291365 = VERTEX_POINT('',#291366); +#291366 = CARTESIAN_POINT('',(123.8,-115.5,1.51)); +#291367 = VERTEX_POINT('',#291368); +#291368 = CARTESIAN_POINT('',(123.8,-115.5,1.545)); +#291369 = LINE('',#291370,#291371); +#291370 = CARTESIAN_POINT('',(123.8,-115.5,1.51)); +#291371 = VECTOR('',#291372,1.); +#291372 = DIRECTION('',(0.,0.,1.)); +#291373 = ORIENTED_EDGE('',*,*,#291374,.T.); +#291374 = EDGE_CURVE('',#291367,#291367,#291375,.T.); +#291375 = CIRCLE('',#291376,0.3); +#291376 = AXIS2_PLACEMENT_3D('',#291377,#291378,#291379); +#291377 = CARTESIAN_POINT('',(123.5,-115.5,1.545)); +#291378 = DIRECTION('',(0.,0.,1.)); +#291379 = DIRECTION('',(1.,0.,-0.)); +#291380 = ORIENTED_EDGE('',*,*,#291364,.F.); +#291381 = ORIENTED_EDGE('',*,*,#291382,.F.); +#291382 = EDGE_CURVE('',#291365,#291365,#291383,.T.); +#291383 = CIRCLE('',#291384,0.3); +#291384 = AXIS2_PLACEMENT_3D('',#291385,#291386,#291387); +#291385 = CARTESIAN_POINT('',(123.5,-115.5,1.51)); +#291386 = DIRECTION('',(0.,0.,1.)); +#291387 = DIRECTION('',(1.,0.,-0.)); +#291388 = CYLINDRICAL_SURFACE('',#291389,0.3); +#291389 = AXIS2_PLACEMENT_3D('',#291390,#291391,#291392); +#291390 = CARTESIAN_POINT('',(123.5,-115.5,1.51)); +#291391 = DIRECTION('',(-0.,-0.,-1.)); +#291392 = DIRECTION('',(1.,0.,-0.)); +#291393 = ADVANCED_FACE('',(#291394),#291421,.F.); +#291394 = FACE_BOUND('',#291395,.T.); +#291395 = EDGE_LOOP('',(#291396,#291406,#291413,#291414)); +#291396 = ORIENTED_EDGE('',*,*,#291397,.T.); +#291397 = EDGE_CURVE('',#291398,#291400,#291402,.T.); +#291398 = VERTEX_POINT('',#291399); +#291399 = CARTESIAN_POINT('',(123.637255,-115.5,1.51)); +#291400 = VERTEX_POINT('',#291401); +#291401 = CARTESIAN_POINT('',(123.637255,-115.5,1.545)); +#291402 = LINE('',#291403,#291404); +#291403 = CARTESIAN_POINT('',(123.637255,-115.5,1.51)); +#291404 = VECTOR('',#291405,1.); +#291405 = DIRECTION('',(0.,0.,1.)); +#291406 = ORIENTED_EDGE('',*,*,#291407,.T.); +#291407 = EDGE_CURVE('',#291400,#291400,#291408,.T.); +#291408 = CIRCLE('',#291409,0.137255); +#291409 = AXIS2_PLACEMENT_3D('',#291410,#291411,#291412); +#291410 = CARTESIAN_POINT('',(123.5,-115.5,1.545)); +#291411 = DIRECTION('',(0.,0.,1.)); +#291412 = DIRECTION('',(1.,0.,-0.)); +#291413 = ORIENTED_EDGE('',*,*,#291397,.F.); +#291414 = ORIENTED_EDGE('',*,*,#291415,.F.); +#291415 = EDGE_CURVE('',#291398,#291398,#291416,.T.); +#291416 = CIRCLE('',#291417,0.137255); +#291417 = AXIS2_PLACEMENT_3D('',#291418,#291419,#291420); +#291418 = CARTESIAN_POINT('',(123.5,-115.5,1.51)); +#291419 = DIRECTION('',(0.,0.,1.)); +#291420 = DIRECTION('',(1.,0.,-0.)); +#291421 = CYLINDRICAL_SURFACE('',#291422,0.137255); +#291422 = AXIS2_PLACEMENT_3D('',#291423,#291424,#291425); +#291423 = CARTESIAN_POINT('',(123.5,-115.5,1.51)); +#291424 = DIRECTION('',(-0.,-0.,-1.)); +#291425 = DIRECTION('',(1.,0.,-0.)); +#291426 = ADVANCED_FACE('',(#291427,#291430),#291433,.F.); +#291427 = FACE_BOUND('',#291428,.F.); +#291428 = EDGE_LOOP('',(#291429)); +#291429 = ORIENTED_EDGE('',*,*,#291382,.T.); +#291430 = FACE_BOUND('',#291431,.T.); +#291431 = EDGE_LOOP('',(#291432)); +#291432 = ORIENTED_EDGE('',*,*,#291415,.T.); +#291433 = PLANE('',#291434); +#291434 = AXIS2_PLACEMENT_3D('',#291435,#291436,#291437); +#291435 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291436 = DIRECTION('',(0.,0.,1.)); +#291437 = DIRECTION('',(1.,0.,-0.)); +#291438 = ADVANCED_FACE('',(#291439,#291442),#291445,.T.); +#291439 = FACE_BOUND('',#291440,.T.); +#291440 = EDGE_LOOP('',(#291441)); +#291441 = ORIENTED_EDGE('',*,*,#291374,.T.); +#291442 = FACE_BOUND('',#291443,.F.); +#291443 = EDGE_LOOP('',(#291444)); +#291444 = ORIENTED_EDGE('',*,*,#291407,.T.); +#291445 = PLANE('',#291446); +#291446 = AXIS2_PLACEMENT_3D('',#291447,#291448,#291449); +#291447 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291448 = DIRECTION('',(0.,0.,1.)); +#291449 = DIRECTION('',(1.,0.,-0.)); +#291450 = MANIFOLD_SOLID_BREP('',#291451); +#291451 = CLOSED_SHELL('',(#291452,#291492,#291525,#291556,#291587, + #291620,#291642,#291675,#291692)); +#291452 = ADVANCED_FACE('',(#291453),#291487,.T.); +#291453 = FACE_BOUND('',#291454,.T.); +#291454 = EDGE_LOOP('',(#291455,#291465,#291473,#291481)); +#291455 = ORIENTED_EDGE('',*,*,#291456,.T.); +#291456 = EDGE_CURVE('',#291457,#291459,#291461,.T.); +#291457 = VERTEX_POINT('',#291458); +#291458 = CARTESIAN_POINT('',(141.968869,-112.6,1.51)); +#291459 = VERTEX_POINT('',#291460); +#291460 = CARTESIAN_POINT('',(141.968869,-112.6,1.545)); +#291461 = LINE('',#291462,#291463); +#291462 = CARTESIAN_POINT('',(141.968869,-112.6,1.51)); +#291463 = VECTOR('',#291464,1.); +#291464 = DIRECTION('',(0.,0.,1.)); +#291465 = ORIENTED_EDGE('',*,*,#291466,.T.); +#291466 = EDGE_CURVE('',#291459,#291467,#291469,.T.); +#291467 = VERTEX_POINT('',#291468); +#291468 = CARTESIAN_POINT('',(140.480491,-112.598079,1.545)); +#291469 = LINE('',#291470,#291471); +#291470 = CARTESIAN_POINT('',(141.968869,-112.6,1.545)); +#291471 = VECTOR('',#291472,1.); +#291472 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#291473 = ORIENTED_EDGE('',*,*,#291474,.F.); +#291474 = EDGE_CURVE('',#291475,#291467,#291477,.T.); +#291475 = VERTEX_POINT('',#291476); +#291476 = CARTESIAN_POINT('',(140.480491,-112.598079,1.51)); +#291477 = LINE('',#291478,#291479); +#291478 = CARTESIAN_POINT('',(140.480491,-112.598079,1.51)); +#291479 = VECTOR('',#291480,1.); +#291480 = DIRECTION('',(0.,0.,1.)); +#291481 = ORIENTED_EDGE('',*,*,#291482,.F.); +#291482 = EDGE_CURVE('',#291457,#291475,#291483,.T.); +#291483 = LINE('',#291484,#291485); +#291484 = CARTESIAN_POINT('',(141.968869,-112.6,1.51)); +#291485 = VECTOR('',#291486,1.); +#291486 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#291487 = PLANE('',#291488); +#291488 = AXIS2_PLACEMENT_3D('',#291489,#291490,#291491); +#291489 = CARTESIAN_POINT('',(141.968869,-112.6,1.51)); +#291490 = DIRECTION('',(-1.290665677655E-03,-0.999999167091,0.)); +#291491 = DIRECTION('',(-0.999999167091,1.290665677655E-03,0.)); +#291492 = ADVANCED_FACE('',(#291493),#291520,.T.); +#291493 = FACE_BOUND('',#291494,.T.); +#291494 = EDGE_LOOP('',(#291495,#291496,#291505,#291513)); +#291495 = ORIENTED_EDGE('',*,*,#291474,.T.); +#291496 = ORIENTED_EDGE('',*,*,#291497,.T.); +#291497 = EDGE_CURVE('',#291467,#291498,#291500,.T.); +#291498 = VERTEX_POINT('',#291499); +#291499 = CARTESIAN_POINT('',(140.480491,-112.401921,1.545)); +#291500 = CIRCLE('',#291501,0.100000456609); +#291501 = AXIS2_PLACEMENT_3D('',#291502,#291503,#291504); +#291502 = CARTESIAN_POINT('',(140.5,-112.5,1.545)); +#291503 = DIRECTION('',(0.,0.,-1.)); +#291504 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291505 = ORIENTED_EDGE('',*,*,#291506,.F.); +#291506 = EDGE_CURVE('',#291507,#291498,#291509,.T.); +#291507 = VERTEX_POINT('',#291508); +#291508 = CARTESIAN_POINT('',(140.480491,-112.401921,1.51)); +#291509 = LINE('',#291510,#291511); +#291510 = CARTESIAN_POINT('',(140.480491,-112.401921,1.51)); +#291511 = VECTOR('',#291512,1.); +#291512 = DIRECTION('',(0.,0.,1.)); +#291513 = ORIENTED_EDGE('',*,*,#291514,.F.); +#291514 = EDGE_CURVE('',#291475,#291507,#291515,.T.); +#291515 = CIRCLE('',#291516,0.100000456609); +#291516 = AXIS2_PLACEMENT_3D('',#291517,#291518,#291519); +#291517 = CARTESIAN_POINT('',(140.5,-112.5,1.51)); +#291518 = DIRECTION('',(0.,0.,-1.)); +#291519 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291520 = CYLINDRICAL_SURFACE('',#291521,0.100000456609); +#291521 = AXIS2_PLACEMENT_3D('',#291522,#291523,#291524); +#291522 = CARTESIAN_POINT('',(140.5,-112.5,1.51)); +#291523 = DIRECTION('',(0.,0.,-1.)); +#291524 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291525 = ADVANCED_FACE('',(#291526),#291551,.T.); +#291526 = FACE_BOUND('',#291527,.T.); +#291527 = EDGE_LOOP('',(#291528,#291529,#291537,#291545)); +#291528 = ORIENTED_EDGE('',*,*,#291506,.T.); +#291529 = ORIENTED_EDGE('',*,*,#291530,.T.); +#291530 = EDGE_CURVE('',#291498,#291531,#291533,.T.); +#291531 = VERTEX_POINT('',#291532); +#291532 = CARTESIAN_POINT('',(141.968869,-112.4,1.545)); +#291533 = LINE('',#291534,#291535); +#291534 = CARTESIAN_POINT('',(140.480491,-112.401921,1.545)); +#291535 = VECTOR('',#291536,1.); +#291536 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#291537 = ORIENTED_EDGE('',*,*,#291538,.F.); +#291538 = EDGE_CURVE('',#291539,#291531,#291541,.T.); +#291539 = VERTEX_POINT('',#291540); +#291540 = CARTESIAN_POINT('',(141.968869,-112.4,1.51)); +#291541 = LINE('',#291542,#291543); +#291542 = CARTESIAN_POINT('',(141.968869,-112.4,1.51)); +#291543 = VECTOR('',#291544,1.); +#291544 = DIRECTION('',(0.,0.,1.)); +#291545 = ORIENTED_EDGE('',*,*,#291546,.F.); +#291546 = EDGE_CURVE('',#291507,#291539,#291547,.T.); +#291547 = LINE('',#291548,#291549); +#291548 = CARTESIAN_POINT('',(140.480491,-112.401921,1.51)); +#291549 = VECTOR('',#291550,1.); +#291550 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#291551 = PLANE('',#291552); +#291552 = AXIS2_PLACEMENT_3D('',#291553,#291554,#291555); +#291553 = CARTESIAN_POINT('',(140.480491,-112.401921,1.51)); +#291554 = DIRECTION('',(-1.290665677655E-03,0.999999167091,0.)); +#291555 = DIRECTION('',(0.999999167091,1.290665677655E-03,0.)); +#291556 = ADVANCED_FACE('',(#291557),#291582,.T.); +#291557 = FACE_BOUND('',#291558,.T.); +#291558 = EDGE_LOOP('',(#291559,#291560,#291568,#291576)); +#291559 = ORIENTED_EDGE('',*,*,#291538,.T.); +#291560 = ORIENTED_EDGE('',*,*,#291561,.T.); +#291561 = EDGE_CURVE('',#291531,#291562,#291564,.T.); +#291562 = VERTEX_POINT('',#291563); +#291563 = CARTESIAN_POINT('',(141.972836,-112.385195,1.545)); +#291564 = LINE('',#291565,#291566); +#291565 = CARTESIAN_POINT('',(141.968869,-112.4,1.545)); +#291566 = VECTOR('',#291567,1.); +#291567 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291568 = ORIENTED_EDGE('',*,*,#291569,.F.); +#291569 = EDGE_CURVE('',#291570,#291562,#291572,.T.); +#291570 = VERTEX_POINT('',#291571); +#291571 = CARTESIAN_POINT('',(141.972836,-112.385195,1.51)); +#291572 = LINE('',#291573,#291574); +#291573 = CARTESIAN_POINT('',(141.972836,-112.385195,1.51)); +#291574 = VECTOR('',#291575,1.); +#291575 = DIRECTION('',(0.,0.,1.)); +#291576 = ORIENTED_EDGE('',*,*,#291577,.F.); +#291577 = EDGE_CURVE('',#291539,#291570,#291578,.T.); +#291578 = LINE('',#291579,#291580); +#291579 = CARTESIAN_POINT('',(141.968869,-112.4,1.51)); +#291580 = VECTOR('',#291581,1.); +#291581 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291582 = PLANE('',#291583); +#291583 = AXIS2_PLACEMENT_3D('',#291584,#291585,#291586); +#291584 = CARTESIAN_POINT('',(141.968869,-112.4,1.51)); +#291585 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#291586 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291587 = ADVANCED_FACE('',(#291588),#291615,.T.); +#291588 = FACE_BOUND('',#291589,.T.); +#291589 = EDGE_LOOP('',(#291590,#291591,#291600,#291608)); +#291590 = ORIENTED_EDGE('',*,*,#291569,.T.); +#291591 = ORIENTED_EDGE('',*,*,#291592,.T.); +#291592 = EDGE_CURVE('',#291562,#291593,#291595,.T.); +#291593 = VERTEX_POINT('',#291594); +#291594 = CARTESIAN_POINT('',(141.972836,-112.614805,1.545)); +#291595 = CIRCLE('',#291596,0.299997422619); +#291596 = AXIS2_PLACEMENT_3D('',#291597,#291598,#291599); +#291597 = CARTESIAN_POINT('',(142.24999708232,-112.5,1.545)); +#291598 = DIRECTION('',(0.,0.,-1.)); +#291599 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291600 = ORIENTED_EDGE('',*,*,#291601,.F.); +#291601 = EDGE_CURVE('',#291602,#291593,#291604,.T.); +#291602 = VERTEX_POINT('',#291603); +#291603 = CARTESIAN_POINT('',(141.972836,-112.614805,1.51)); +#291604 = LINE('',#291605,#291606); +#291605 = CARTESIAN_POINT('',(141.972836,-112.614805,1.51)); +#291606 = VECTOR('',#291607,1.); +#291607 = DIRECTION('',(0.,0.,1.)); +#291608 = ORIENTED_EDGE('',*,*,#291609,.F.); +#291609 = EDGE_CURVE('',#291570,#291602,#291610,.T.); +#291610 = CIRCLE('',#291611,0.299997422619); +#291611 = AXIS2_PLACEMENT_3D('',#291612,#291613,#291614); +#291612 = CARTESIAN_POINT('',(142.24999708232,-112.5,1.51)); +#291613 = DIRECTION('',(0.,0.,-1.)); +#291614 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291615 = CYLINDRICAL_SURFACE('',#291616,0.299997422619); +#291616 = AXIS2_PLACEMENT_3D('',#291617,#291618,#291619); +#291617 = CARTESIAN_POINT('',(142.24999708232,-112.5,1.51)); +#291618 = DIRECTION('',(0.,0.,-1.)); +#291619 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291620 = ADVANCED_FACE('',(#291621),#291637,.T.); +#291621 = FACE_BOUND('',#291622,.T.); +#291622 = EDGE_LOOP('',(#291623,#291624,#291630,#291631)); +#291623 = ORIENTED_EDGE('',*,*,#291601,.T.); +#291624 = ORIENTED_EDGE('',*,*,#291625,.T.); +#291625 = EDGE_CURVE('',#291593,#291459,#291626,.T.); +#291626 = LINE('',#291627,#291628); +#291627 = CARTESIAN_POINT('',(141.972836,-112.614805,1.545)); +#291628 = VECTOR('',#291629,1.); +#291629 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291630 = ORIENTED_EDGE('',*,*,#291456,.F.); +#291631 = ORIENTED_EDGE('',*,*,#291632,.F.); +#291632 = EDGE_CURVE('',#291602,#291457,#291633,.T.); +#291633 = LINE('',#291634,#291635); +#291634 = CARTESIAN_POINT('',(141.972836,-112.614805,1.51)); +#291635 = VECTOR('',#291636,1.); +#291636 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291637 = PLANE('',#291638); +#291638 = AXIS2_PLACEMENT_3D('',#291639,#291640,#291641); +#291639 = CARTESIAN_POINT('',(141.972836,-112.614805,1.51)); +#291640 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#291641 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291642 = ADVANCED_FACE('',(#291643),#291670,.F.); +#291643 = FACE_BOUND('',#291644,.T.); +#291644 = EDGE_LOOP('',(#291645,#291655,#291662,#291663)); +#291645 = ORIENTED_EDGE('',*,*,#291646,.T.); +#291646 = EDGE_CURVE('',#291647,#291649,#291651,.T.); +#291647 = VERTEX_POINT('',#291648); +#291648 = CARTESIAN_POINT('',(142.387255,-112.5,1.51)); +#291649 = VERTEX_POINT('',#291650); +#291650 = CARTESIAN_POINT('',(142.387255,-112.5,1.545)); +#291651 = LINE('',#291652,#291653); +#291652 = CARTESIAN_POINT('',(142.387255,-112.5,1.51)); +#291653 = VECTOR('',#291654,1.); +#291654 = DIRECTION('',(0.,0.,1.)); +#291655 = ORIENTED_EDGE('',*,*,#291656,.T.); +#291656 = EDGE_CURVE('',#291649,#291649,#291657,.T.); +#291657 = CIRCLE('',#291658,0.137255); +#291658 = AXIS2_PLACEMENT_3D('',#291659,#291660,#291661); +#291659 = CARTESIAN_POINT('',(142.25,-112.5,1.545)); +#291660 = DIRECTION('',(0.,0.,1.)); +#291661 = DIRECTION('',(1.,0.,-0.)); +#291662 = ORIENTED_EDGE('',*,*,#291646,.F.); +#291663 = ORIENTED_EDGE('',*,*,#291664,.F.); +#291664 = EDGE_CURVE('',#291647,#291647,#291665,.T.); +#291665 = CIRCLE('',#291666,0.137255); +#291666 = AXIS2_PLACEMENT_3D('',#291667,#291668,#291669); +#291667 = CARTESIAN_POINT('',(142.25,-112.5,1.51)); +#291668 = DIRECTION('',(0.,0.,1.)); +#291669 = DIRECTION('',(1.,0.,-0.)); +#291670 = CYLINDRICAL_SURFACE('',#291671,0.137255); +#291671 = AXIS2_PLACEMENT_3D('',#291672,#291673,#291674); +#291672 = CARTESIAN_POINT('',(142.25,-112.5,1.51)); +#291673 = DIRECTION('',(-0.,-0.,-1.)); +#291674 = DIRECTION('',(1.,0.,-0.)); +#291675 = ADVANCED_FACE('',(#291676,#291684),#291687,.F.); +#291676 = FACE_BOUND('',#291677,.T.); +#291677 = EDGE_LOOP('',(#291678,#291679,#291680,#291681,#291682,#291683) + ); +#291678 = ORIENTED_EDGE('',*,*,#291482,.T.); +#291679 = ORIENTED_EDGE('',*,*,#291514,.T.); +#291680 = ORIENTED_EDGE('',*,*,#291546,.T.); +#291681 = ORIENTED_EDGE('',*,*,#291577,.T.); +#291682 = ORIENTED_EDGE('',*,*,#291609,.T.); +#291683 = ORIENTED_EDGE('',*,*,#291632,.T.); +#291684 = FACE_BOUND('',#291685,.T.); +#291685 = EDGE_LOOP('',(#291686)); +#291686 = ORIENTED_EDGE('',*,*,#291664,.T.); +#291687 = PLANE('',#291688); +#291688 = AXIS2_PLACEMENT_3D('',#291689,#291690,#291691); +#291689 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291690 = DIRECTION('',(0.,0.,1.)); +#291691 = DIRECTION('',(1.,0.,-0.)); +#291692 = ADVANCED_FACE('',(#291693,#291701),#291704,.T.); +#291693 = FACE_BOUND('',#291694,.F.); +#291694 = EDGE_LOOP('',(#291695,#291696,#291697,#291698,#291699,#291700) + ); +#291695 = ORIENTED_EDGE('',*,*,#291466,.T.); +#291696 = ORIENTED_EDGE('',*,*,#291497,.T.); +#291697 = ORIENTED_EDGE('',*,*,#291530,.T.); +#291698 = ORIENTED_EDGE('',*,*,#291561,.T.); +#291699 = ORIENTED_EDGE('',*,*,#291592,.T.); +#291700 = ORIENTED_EDGE('',*,*,#291625,.T.); +#291701 = FACE_BOUND('',#291702,.F.); +#291702 = EDGE_LOOP('',(#291703)); +#291703 = ORIENTED_EDGE('',*,*,#291656,.T.); +#291704 = PLANE('',#291705); +#291705 = AXIS2_PLACEMENT_3D('',#291706,#291707,#291708); +#291706 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291707 = DIRECTION('',(0.,0.,1.)); +#291708 = DIRECTION('',(1.,0.,-0.)); +#291709 = MANIFOLD_SOLID_BREP('',#291710); +#291710 = CLOSED_SHELL('',(#291711,#291751,#291784,#291815,#291846, + #291879,#291901,#291934,#291951)); +#291711 = ADVANCED_FACE('',(#291712),#291746,.T.); +#291712 = FACE_BOUND('',#291713,.T.); +#291713 = EDGE_LOOP('',(#291714,#291724,#291732,#291740)); +#291714 = ORIENTED_EDGE('',*,*,#291715,.T.); +#291715 = EDGE_CURVE('',#291716,#291718,#291720,.T.); +#291716 = VERTEX_POINT('',#291717); +#291717 = CARTESIAN_POINT('',(152.468869,-112.6,1.51)); +#291718 = VERTEX_POINT('',#291719); +#291719 = CARTESIAN_POINT('',(152.468869,-112.6,1.545)); +#291720 = LINE('',#291721,#291722); +#291721 = CARTESIAN_POINT('',(152.468869,-112.6,1.51)); +#291722 = VECTOR('',#291723,1.); +#291723 = DIRECTION('',(0.,0.,1.)); +#291724 = ORIENTED_EDGE('',*,*,#291725,.T.); +#291725 = EDGE_CURVE('',#291718,#291726,#291728,.T.); +#291726 = VERTEX_POINT('',#291727); +#291727 = CARTESIAN_POINT('',(150.730491,-112.598079,1.545)); +#291728 = LINE('',#291729,#291730); +#291729 = CARTESIAN_POINT('',(152.468869,-112.6,1.545)); +#291730 = VECTOR('',#291731,1.); +#291731 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#291732 = ORIENTED_EDGE('',*,*,#291733,.F.); +#291733 = EDGE_CURVE('',#291734,#291726,#291736,.T.); +#291734 = VERTEX_POINT('',#291735); +#291735 = CARTESIAN_POINT('',(150.730491,-112.598079,1.51)); +#291736 = LINE('',#291737,#291738); +#291737 = CARTESIAN_POINT('',(150.730491,-112.598079,1.51)); +#291738 = VECTOR('',#291739,1.); +#291739 = DIRECTION('',(0.,0.,1.)); +#291740 = ORIENTED_EDGE('',*,*,#291741,.F.); +#291741 = EDGE_CURVE('',#291716,#291734,#291742,.T.); +#291742 = LINE('',#291743,#291744); +#291743 = CARTESIAN_POINT('',(152.468869,-112.6,1.51)); +#291744 = VECTOR('',#291745,1.); +#291745 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#291746 = PLANE('',#291747); +#291747 = AXIS2_PLACEMENT_3D('',#291748,#291749,#291750); +#291748 = CARTESIAN_POINT('',(152.468869,-112.6,1.51)); +#291749 = DIRECTION('',(-1.105052426509E-03,-0.999999389429,0.)); +#291750 = DIRECTION('',(-0.999999389429,1.105052426509E-03,0.)); +#291751 = ADVANCED_FACE('',(#291752),#291779,.T.); +#291752 = FACE_BOUND('',#291753,.T.); +#291753 = EDGE_LOOP('',(#291754,#291755,#291764,#291772)); +#291754 = ORIENTED_EDGE('',*,*,#291733,.T.); +#291755 = ORIENTED_EDGE('',*,*,#291756,.T.); +#291756 = EDGE_CURVE('',#291726,#291757,#291759,.T.); +#291757 = VERTEX_POINT('',#291758); +#291758 = CARTESIAN_POINT('',(150.730491,-112.401921,1.545)); +#291759 = CIRCLE('',#291760,0.100000456609); +#291760 = AXIS2_PLACEMENT_3D('',#291761,#291762,#291763); +#291761 = CARTESIAN_POINT('',(150.75,-112.5,1.545)); +#291762 = DIRECTION('',(0.,0.,-1.)); +#291763 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291764 = ORIENTED_EDGE('',*,*,#291765,.F.); +#291765 = EDGE_CURVE('',#291766,#291757,#291768,.T.); +#291766 = VERTEX_POINT('',#291767); +#291767 = CARTESIAN_POINT('',(150.730491,-112.401921,1.51)); +#291768 = LINE('',#291769,#291770); +#291769 = CARTESIAN_POINT('',(150.730491,-112.401921,1.51)); +#291770 = VECTOR('',#291771,1.); +#291771 = DIRECTION('',(0.,0.,1.)); +#291772 = ORIENTED_EDGE('',*,*,#291773,.F.); +#291773 = EDGE_CURVE('',#291734,#291766,#291774,.T.); +#291774 = CIRCLE('',#291775,0.100000456609); +#291775 = AXIS2_PLACEMENT_3D('',#291776,#291777,#291778); +#291776 = CARTESIAN_POINT('',(150.75,-112.5,1.51)); +#291777 = DIRECTION('',(0.,0.,-1.)); +#291778 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291779 = CYLINDRICAL_SURFACE('',#291780,0.100000456609); +#291780 = AXIS2_PLACEMENT_3D('',#291781,#291782,#291783); +#291781 = CARTESIAN_POINT('',(150.75,-112.5,1.51)); +#291782 = DIRECTION('',(0.,0.,-1.)); +#291783 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#291784 = ADVANCED_FACE('',(#291785),#291810,.T.); +#291785 = FACE_BOUND('',#291786,.T.); +#291786 = EDGE_LOOP('',(#291787,#291788,#291796,#291804)); +#291787 = ORIENTED_EDGE('',*,*,#291765,.T.); +#291788 = ORIENTED_EDGE('',*,*,#291789,.T.); +#291789 = EDGE_CURVE('',#291757,#291790,#291792,.T.); +#291790 = VERTEX_POINT('',#291791); +#291791 = CARTESIAN_POINT('',(152.468869,-112.4,1.545)); +#291792 = LINE('',#291793,#291794); +#291793 = CARTESIAN_POINT('',(150.730491,-112.401921,1.545)); +#291794 = VECTOR('',#291795,1.); +#291795 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#291796 = ORIENTED_EDGE('',*,*,#291797,.F.); +#291797 = EDGE_CURVE('',#291798,#291790,#291800,.T.); +#291798 = VERTEX_POINT('',#291799); +#291799 = CARTESIAN_POINT('',(152.468869,-112.4,1.51)); +#291800 = LINE('',#291801,#291802); +#291801 = CARTESIAN_POINT('',(152.468869,-112.4,1.51)); +#291802 = VECTOR('',#291803,1.); +#291803 = DIRECTION('',(0.,0.,1.)); +#291804 = ORIENTED_EDGE('',*,*,#291805,.F.); +#291805 = EDGE_CURVE('',#291766,#291798,#291806,.T.); +#291806 = LINE('',#291807,#291808); +#291807 = CARTESIAN_POINT('',(150.730491,-112.401921,1.51)); +#291808 = VECTOR('',#291809,1.); +#291809 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#291810 = PLANE('',#291811); +#291811 = AXIS2_PLACEMENT_3D('',#291812,#291813,#291814); +#291812 = CARTESIAN_POINT('',(150.730491,-112.401921,1.51)); +#291813 = DIRECTION('',(-1.105052426509E-03,0.999999389429,0.)); +#291814 = DIRECTION('',(0.999999389429,1.105052426509E-03,0.)); +#291815 = ADVANCED_FACE('',(#291816),#291841,.T.); +#291816 = FACE_BOUND('',#291817,.T.); +#291817 = EDGE_LOOP('',(#291818,#291819,#291827,#291835)); +#291818 = ORIENTED_EDGE('',*,*,#291797,.T.); +#291819 = ORIENTED_EDGE('',*,*,#291820,.T.); +#291820 = EDGE_CURVE('',#291790,#291821,#291823,.T.); +#291821 = VERTEX_POINT('',#291822); +#291822 = CARTESIAN_POINT('',(152.472836,-112.385195,1.545)); +#291823 = LINE('',#291824,#291825); +#291824 = CARTESIAN_POINT('',(152.468869,-112.4,1.545)); +#291825 = VECTOR('',#291826,1.); +#291826 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291827 = ORIENTED_EDGE('',*,*,#291828,.F.); +#291828 = EDGE_CURVE('',#291829,#291821,#291831,.T.); +#291829 = VERTEX_POINT('',#291830); +#291830 = CARTESIAN_POINT('',(152.472836,-112.385195,1.51)); +#291831 = LINE('',#291832,#291833); +#291832 = CARTESIAN_POINT('',(152.472836,-112.385195,1.51)); +#291833 = VECTOR('',#291834,1.); +#291834 = DIRECTION('',(0.,0.,1.)); +#291835 = ORIENTED_EDGE('',*,*,#291836,.F.); +#291836 = EDGE_CURVE('',#291798,#291829,#291837,.T.); +#291837 = LINE('',#291838,#291839); +#291838 = CARTESIAN_POINT('',(152.468869,-112.4,1.51)); +#291839 = VECTOR('',#291840,1.); +#291840 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291841 = PLANE('',#291842); +#291842 = AXIS2_PLACEMENT_3D('',#291843,#291844,#291845); +#291843 = CARTESIAN_POINT('',(152.468869,-112.4,1.51)); +#291844 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#291845 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#291846 = ADVANCED_FACE('',(#291847),#291874,.T.); +#291847 = FACE_BOUND('',#291848,.T.); +#291848 = EDGE_LOOP('',(#291849,#291850,#291859,#291867)); +#291849 = ORIENTED_EDGE('',*,*,#291828,.T.); +#291850 = ORIENTED_EDGE('',*,*,#291851,.T.); +#291851 = EDGE_CURVE('',#291821,#291852,#291854,.T.); +#291852 = VERTEX_POINT('',#291853); +#291853 = CARTESIAN_POINT('',(152.472836,-112.614805,1.545)); +#291854 = CIRCLE('',#291855,0.299997422619); +#291855 = AXIS2_PLACEMENT_3D('',#291856,#291857,#291858); +#291856 = CARTESIAN_POINT('',(152.74999708232,-112.5,1.545)); +#291857 = DIRECTION('',(0.,0.,-1.)); +#291858 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291859 = ORIENTED_EDGE('',*,*,#291860,.F.); +#291860 = EDGE_CURVE('',#291861,#291852,#291863,.T.); +#291861 = VERTEX_POINT('',#291862); +#291862 = CARTESIAN_POINT('',(152.472836,-112.614805,1.51)); +#291863 = LINE('',#291864,#291865); +#291864 = CARTESIAN_POINT('',(152.472836,-112.614805,1.51)); +#291865 = VECTOR('',#291866,1.); +#291866 = DIRECTION('',(0.,0.,1.)); +#291867 = ORIENTED_EDGE('',*,*,#291868,.F.); +#291868 = EDGE_CURVE('',#291829,#291861,#291869,.T.); +#291869 = CIRCLE('',#291870,0.299997422619); +#291870 = AXIS2_PLACEMENT_3D('',#291871,#291872,#291873); +#291871 = CARTESIAN_POINT('',(152.74999708232,-112.5,1.51)); +#291872 = DIRECTION('',(0.,0.,-1.)); +#291873 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291874 = CYLINDRICAL_SURFACE('',#291875,0.299997422619); +#291875 = AXIS2_PLACEMENT_3D('',#291876,#291877,#291878); +#291876 = CARTESIAN_POINT('',(152.74999708232,-112.5,1.51)); +#291877 = DIRECTION('',(0.,0.,-1.)); +#291878 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#291879 = ADVANCED_FACE('',(#291880),#291896,.T.); +#291880 = FACE_BOUND('',#291881,.T.); +#291881 = EDGE_LOOP('',(#291882,#291883,#291889,#291890)); +#291882 = ORIENTED_EDGE('',*,*,#291860,.T.); +#291883 = ORIENTED_EDGE('',*,*,#291884,.T.); +#291884 = EDGE_CURVE('',#291852,#291718,#291885,.T.); +#291885 = LINE('',#291886,#291887); +#291886 = CARTESIAN_POINT('',(152.472836,-112.614805,1.545)); +#291887 = VECTOR('',#291888,1.); +#291888 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291889 = ORIENTED_EDGE('',*,*,#291715,.F.); +#291890 = ORIENTED_EDGE('',*,*,#291891,.F.); +#291891 = EDGE_CURVE('',#291861,#291716,#291892,.T.); +#291892 = LINE('',#291893,#291894); +#291893 = CARTESIAN_POINT('',(152.472836,-112.614805,1.51)); +#291894 = VECTOR('',#291895,1.); +#291895 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291896 = PLANE('',#291897); +#291897 = AXIS2_PLACEMENT_3D('',#291898,#291899,#291900); +#291898 = CARTESIAN_POINT('',(152.472836,-112.614805,1.51)); +#291899 = DIRECTION('',(-0.965925627198,-0.258819788118,0.)); +#291900 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#291901 = ADVANCED_FACE('',(#291902),#291929,.F.); +#291902 = FACE_BOUND('',#291903,.T.); +#291903 = EDGE_LOOP('',(#291904,#291914,#291921,#291922)); +#291904 = ORIENTED_EDGE('',*,*,#291905,.T.); +#291905 = EDGE_CURVE('',#291906,#291908,#291910,.T.); +#291906 = VERTEX_POINT('',#291907); +#291907 = CARTESIAN_POINT('',(152.887255,-112.5,1.51)); +#291908 = VERTEX_POINT('',#291909); +#291909 = CARTESIAN_POINT('',(152.887255,-112.5,1.545)); +#291910 = LINE('',#291911,#291912); +#291911 = CARTESIAN_POINT('',(152.887255,-112.5,1.51)); +#291912 = VECTOR('',#291913,1.); +#291913 = DIRECTION('',(0.,0.,1.)); +#291914 = ORIENTED_EDGE('',*,*,#291915,.T.); +#291915 = EDGE_CURVE('',#291908,#291908,#291916,.T.); +#291916 = CIRCLE('',#291917,0.137255); +#291917 = AXIS2_PLACEMENT_3D('',#291918,#291919,#291920); +#291918 = CARTESIAN_POINT('',(152.75,-112.5,1.545)); +#291919 = DIRECTION('',(0.,0.,1.)); +#291920 = DIRECTION('',(1.,0.,-0.)); +#291921 = ORIENTED_EDGE('',*,*,#291905,.F.); +#291922 = ORIENTED_EDGE('',*,*,#291923,.F.); +#291923 = EDGE_CURVE('',#291906,#291906,#291924,.T.); +#291924 = CIRCLE('',#291925,0.137255); +#291925 = AXIS2_PLACEMENT_3D('',#291926,#291927,#291928); +#291926 = CARTESIAN_POINT('',(152.75,-112.5,1.51)); +#291927 = DIRECTION('',(0.,0.,1.)); +#291928 = DIRECTION('',(1.,0.,-0.)); +#291929 = CYLINDRICAL_SURFACE('',#291930,0.137255); +#291930 = AXIS2_PLACEMENT_3D('',#291931,#291932,#291933); +#291931 = CARTESIAN_POINT('',(152.75,-112.5,1.51)); +#291932 = DIRECTION('',(-0.,-0.,-1.)); +#291933 = DIRECTION('',(1.,0.,-0.)); +#291934 = ADVANCED_FACE('',(#291935,#291943),#291946,.F.); +#291935 = FACE_BOUND('',#291936,.T.); +#291936 = EDGE_LOOP('',(#291937,#291938,#291939,#291940,#291941,#291942) + ); +#291937 = ORIENTED_EDGE('',*,*,#291741,.T.); +#291938 = ORIENTED_EDGE('',*,*,#291773,.T.); +#291939 = ORIENTED_EDGE('',*,*,#291805,.T.); +#291940 = ORIENTED_EDGE('',*,*,#291836,.T.); +#291941 = ORIENTED_EDGE('',*,*,#291868,.T.); +#291942 = ORIENTED_EDGE('',*,*,#291891,.T.); +#291943 = FACE_BOUND('',#291944,.T.); +#291944 = EDGE_LOOP('',(#291945)); +#291945 = ORIENTED_EDGE('',*,*,#291923,.T.); +#291946 = PLANE('',#291947); +#291947 = AXIS2_PLACEMENT_3D('',#291948,#291949,#291950); +#291948 = CARTESIAN_POINT('',(0.,0.,1.51)); +#291949 = DIRECTION('',(0.,0.,1.)); +#291950 = DIRECTION('',(1.,0.,-0.)); +#291951 = ADVANCED_FACE('',(#291952,#291960),#291963,.T.); +#291952 = FACE_BOUND('',#291953,.F.); +#291953 = EDGE_LOOP('',(#291954,#291955,#291956,#291957,#291958,#291959) + ); +#291954 = ORIENTED_EDGE('',*,*,#291725,.T.); +#291955 = ORIENTED_EDGE('',*,*,#291756,.T.); +#291956 = ORIENTED_EDGE('',*,*,#291789,.T.); +#291957 = ORIENTED_EDGE('',*,*,#291820,.T.); +#291958 = ORIENTED_EDGE('',*,*,#291851,.T.); +#291959 = ORIENTED_EDGE('',*,*,#291884,.T.); +#291960 = FACE_BOUND('',#291961,.F.); +#291961 = EDGE_LOOP('',(#291962)); +#291962 = ORIENTED_EDGE('',*,*,#291915,.T.); +#291963 = PLANE('',#291964); +#291964 = AXIS2_PLACEMENT_3D('',#291965,#291966,#291967); +#291965 = CARTESIAN_POINT('',(0.,0.,1.545)); +#291966 = DIRECTION('',(0.,0.,1.)); +#291967 = DIRECTION('',(1.,0.,-0.)); +#291968 = MANIFOLD_SOLID_BREP('',#291969); +#291969 = CLOSED_SHELL('',(#291970,#292010,#292041,#292072,#292103, + #292134,#292167,#292198,#292229,#292260,#292291,#292324,#292346, + #292379,#292402)); +#291970 = ADVANCED_FACE('',(#291971),#292005,.T.); +#291971 = FACE_BOUND('',#291972,.T.); +#291972 = EDGE_LOOP('',(#291973,#291983,#291991,#291999)); +#291973 = ORIENTED_EDGE('',*,*,#291974,.T.); +#291974 = EDGE_CURVE('',#291975,#291977,#291979,.T.); +#291975 = VERTEX_POINT('',#291976); +#291976 = CARTESIAN_POINT('',(131.15,-111.48113,1.51)); +#291977 = VERTEX_POINT('',#291978); +#291978 = CARTESIAN_POINT('',(131.15,-111.48113,1.545)); +#291979 = LINE('',#291980,#291981); +#291980 = CARTESIAN_POINT('',(131.15,-111.48113,1.51)); +#291981 = VECTOR('',#291982,1.); +#291982 = DIRECTION('',(0.,0.,1.)); +#291983 = ORIENTED_EDGE('',*,*,#291984,.T.); +#291984 = EDGE_CURVE('',#291977,#291985,#291987,.T.); +#291985 = VERTEX_POINT('',#291986); +#291986 = CARTESIAN_POINT('',(131.148079,-111.969509,1.545)); +#291987 = LINE('',#291988,#291989); +#291988 = CARTESIAN_POINT('',(131.15,-111.48113,1.545)); +#291989 = VECTOR('',#291990,1.); +#291990 = DIRECTION('',(-3.933390132502E-03,-0.999992264191,0.)); +#291991 = ORIENTED_EDGE('',*,*,#291992,.F.); +#291992 = EDGE_CURVE('',#291993,#291985,#291995,.T.); +#291993 = VERTEX_POINT('',#291994); +#291994 = CARTESIAN_POINT('',(131.148079,-111.969509,1.51)); +#291995 = LINE('',#291996,#291997); +#291996 = CARTESIAN_POINT('',(131.148079,-111.969509,1.51)); +#291997 = VECTOR('',#291998,1.); +#291998 = DIRECTION('',(0.,0.,1.)); +#291999 = ORIENTED_EDGE('',*,*,#292000,.F.); +#292000 = EDGE_CURVE('',#291975,#291993,#292001,.T.); +#292001 = LINE('',#292002,#292003); +#292002 = CARTESIAN_POINT('',(131.15,-111.48113,1.51)); +#292003 = VECTOR('',#292004,1.); +#292004 = DIRECTION('',(-3.933390132502E-03,-0.999992264191,0.)); +#292005 = PLANE('',#292006); +#292006 = AXIS2_PLACEMENT_3D('',#292007,#292008,#292009); +#292007 = CARTESIAN_POINT('',(131.15,-111.48113,1.51)); +#292008 = DIRECTION('',(0.999992264191,-3.933390132502E-03,0.)); +#292009 = DIRECTION('',(-3.933390132502E-03,-0.999992264191,0.)); +#292010 = ADVANCED_FACE('',(#292011),#292036,.T.); +#292011 = FACE_BOUND('',#292012,.T.); +#292012 = EDGE_LOOP('',(#292013,#292014,#292022,#292030)); +#292013 = ORIENTED_EDGE('',*,*,#291992,.T.); +#292014 = ORIENTED_EDGE('',*,*,#292015,.T.); +#292015 = EDGE_CURVE('',#291985,#292016,#292018,.T.); +#292016 = VERTEX_POINT('',#292017); +#292017 = CARTESIAN_POINT('',(131.133147,-112.005558,1.545)); +#292018 = LINE('',#292019,#292020); +#292019 = CARTESIAN_POINT('',(131.148079,-111.969509,1.545)); +#292020 = VECTOR('',#292021,1.); +#292021 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#292022 = ORIENTED_EDGE('',*,*,#292023,.F.); +#292023 = EDGE_CURVE('',#292024,#292016,#292026,.T.); +#292024 = VERTEX_POINT('',#292025); +#292025 = CARTESIAN_POINT('',(131.133147,-112.005558,1.51)); +#292026 = LINE('',#292027,#292028); +#292027 = CARTESIAN_POINT('',(131.133147,-112.005558,1.51)); +#292028 = VECTOR('',#292029,1.); +#292029 = DIRECTION('',(0.,0.,1.)); +#292030 = ORIENTED_EDGE('',*,*,#292031,.F.); +#292031 = EDGE_CURVE('',#291993,#292024,#292032,.T.); +#292032 = LINE('',#292033,#292034); +#292033 = CARTESIAN_POINT('',(131.148079,-111.969509,1.51)); +#292034 = VECTOR('',#292035,1.); +#292035 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#292036 = PLANE('',#292037); +#292037 = AXIS2_PLACEMENT_3D('',#292038,#292039,#292040); +#292038 = CARTESIAN_POINT('',(131.148079,-111.969509,1.51)); +#292039 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#292040 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#292041 = ADVANCED_FACE('',(#292042),#292067,.T.); +#292042 = FACE_BOUND('',#292043,.T.); +#292043 = EDGE_LOOP('',(#292044,#292045,#292053,#292061)); +#292044 = ORIENTED_EDGE('',*,*,#292023,.T.); +#292045 = ORIENTED_EDGE('',*,*,#292046,.T.); +#292046 = EDGE_CURVE('',#292016,#292047,#292049,.T.); +#292047 = VERTEX_POINT('',#292048); +#292048 = CARTESIAN_POINT('',(130.555557,-112.583147,1.545)); +#292049 = LINE('',#292050,#292051); +#292050 = CARTESIAN_POINT('',(131.133147,-112.005558,1.545)); +#292051 = VECTOR('',#292052,1.); +#292052 = DIRECTION('',(-0.707107393305,-0.707106169067,0.)); +#292053 = ORIENTED_EDGE('',*,*,#292054,.F.); +#292054 = EDGE_CURVE('',#292055,#292047,#292057,.T.); +#292055 = VERTEX_POINT('',#292056); +#292056 = CARTESIAN_POINT('',(130.555557,-112.583147,1.51)); +#292057 = LINE('',#292058,#292059); +#292058 = CARTESIAN_POINT('',(130.555557,-112.583147,1.51)); +#292059 = VECTOR('',#292060,1.); +#292060 = DIRECTION('',(0.,0.,1.)); +#292061 = ORIENTED_EDGE('',*,*,#292062,.F.); +#292062 = EDGE_CURVE('',#292024,#292055,#292063,.T.); +#292063 = LINE('',#292064,#292065); +#292064 = CARTESIAN_POINT('',(131.133147,-112.005558,1.51)); +#292065 = VECTOR('',#292066,1.); +#292066 = DIRECTION('',(-0.707107393305,-0.707106169067,0.)); +#292067 = PLANE('',#292068); +#292068 = AXIS2_PLACEMENT_3D('',#292069,#292070,#292071); +#292069 = CARTESIAN_POINT('',(131.133147,-112.005558,1.51)); +#292070 = DIRECTION('',(0.707106169067,-0.707107393305,0.)); +#292071 = DIRECTION('',(-0.707107393305,-0.707106169067,0.)); +#292072 = ADVANCED_FACE('',(#292073),#292098,.T.); +#292073 = FACE_BOUND('',#292074,.T.); +#292074 = EDGE_LOOP('',(#292075,#292076,#292084,#292092)); +#292075 = ORIENTED_EDGE('',*,*,#292054,.T.); +#292076 = ORIENTED_EDGE('',*,*,#292077,.T.); +#292077 = EDGE_CURVE('',#292047,#292078,#292080,.T.); +#292078 = VERTEX_POINT('',#292079); +#292079 = CARTESIAN_POINT('',(130.519509,-112.598079,1.545)); +#292080 = LINE('',#292081,#292082); +#292081 = CARTESIAN_POINT('',(130.555557,-112.583147,1.545)); +#292082 = VECTOR('',#292083,1.); +#292083 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#292084 = ORIENTED_EDGE('',*,*,#292085,.F.); +#292085 = EDGE_CURVE('',#292086,#292078,#292088,.T.); +#292086 = VERTEX_POINT('',#292087); +#292087 = CARTESIAN_POINT('',(130.519509,-112.598079,1.51)); +#292088 = LINE('',#292089,#292090); +#292089 = CARTESIAN_POINT('',(130.519509,-112.598079,1.51)); +#292090 = VECTOR('',#292091,1.); +#292091 = DIRECTION('',(0.,0.,1.)); +#292092 = ORIENTED_EDGE('',*,*,#292093,.F.); +#292093 = EDGE_CURVE('',#292055,#292086,#292094,.T.); +#292094 = LINE('',#292095,#292096); +#292095 = CARTESIAN_POINT('',(130.555557,-112.583147,1.51)); +#292096 = VECTOR('',#292097,1.); +#292097 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#292098 = PLANE('',#292099); +#292099 = AXIS2_PLACEMENT_3D('',#292100,#292101,#292102); +#292100 = CARTESIAN_POINT('',(130.555557,-112.583147,1.51)); +#292101 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#292102 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#292103 = ADVANCED_FACE('',(#292104),#292129,.T.); +#292104 = FACE_BOUND('',#292105,.T.); +#292105 = EDGE_LOOP('',(#292106,#292107,#292115,#292123)); +#292106 = ORIENTED_EDGE('',*,*,#292085,.T.); +#292107 = ORIENTED_EDGE('',*,*,#292108,.T.); +#292108 = EDGE_CURVE('',#292078,#292109,#292111,.T.); +#292109 = VERTEX_POINT('',#292110); +#292110 = CARTESIAN_POINT('',(130.230491,-112.598079,1.545)); +#292111 = LINE('',#292112,#292113); +#292112 = CARTESIAN_POINT('',(130.519509,-112.598079,1.545)); +#292113 = VECTOR('',#292114,1.); +#292114 = DIRECTION('',(-1.,0.,0.)); +#292115 = ORIENTED_EDGE('',*,*,#292116,.F.); +#292116 = EDGE_CURVE('',#292117,#292109,#292119,.T.); +#292117 = VERTEX_POINT('',#292118); +#292118 = CARTESIAN_POINT('',(130.230491,-112.598079,1.51)); +#292119 = LINE('',#292120,#292121); +#292120 = CARTESIAN_POINT('',(130.230491,-112.598079,1.51)); +#292121 = VECTOR('',#292122,1.); +#292122 = DIRECTION('',(0.,0.,1.)); +#292123 = ORIENTED_EDGE('',*,*,#292124,.F.); +#292124 = EDGE_CURVE('',#292086,#292117,#292125,.T.); +#292125 = LINE('',#292126,#292127); +#292126 = CARTESIAN_POINT('',(130.519509,-112.598079,1.51)); +#292127 = VECTOR('',#292128,1.); +#292128 = DIRECTION('',(-1.,0.,0.)); +#292129 = PLANE('',#292130); +#292130 = AXIS2_PLACEMENT_3D('',#292131,#292132,#292133); +#292131 = CARTESIAN_POINT('',(130.519509,-112.598079,1.51)); +#292132 = DIRECTION('',(0.,-1.,0.)); +#292133 = DIRECTION('',(-1.,0.,0.)); +#292134 = ADVANCED_FACE('',(#292135),#292162,.T.); +#292135 = FACE_BOUND('',#292136,.T.); +#292136 = EDGE_LOOP('',(#292137,#292138,#292147,#292155)); +#292137 = ORIENTED_EDGE('',*,*,#292116,.T.); +#292138 = ORIENTED_EDGE('',*,*,#292139,.T.); +#292139 = EDGE_CURVE('',#292109,#292140,#292142,.T.); +#292140 = VERTEX_POINT('',#292141); +#292141 = CARTESIAN_POINT('',(130.230491,-112.401921,1.545)); +#292142 = CIRCLE('',#292143,0.100000456609); +#292143 = AXIS2_PLACEMENT_3D('',#292144,#292145,#292146); +#292144 = CARTESIAN_POINT('',(130.25,-112.5,1.545)); +#292145 = DIRECTION('',(0.,0.,-1.)); +#292146 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#292147 = ORIENTED_EDGE('',*,*,#292148,.F.); +#292148 = EDGE_CURVE('',#292149,#292140,#292151,.T.); +#292149 = VERTEX_POINT('',#292150); +#292150 = CARTESIAN_POINT('',(130.230491,-112.401921,1.51)); +#292151 = LINE('',#292152,#292153); +#292152 = CARTESIAN_POINT('',(130.230491,-112.401921,1.51)); +#292153 = VECTOR('',#292154,1.); +#292154 = DIRECTION('',(0.,0.,1.)); +#292155 = ORIENTED_EDGE('',*,*,#292156,.F.); +#292156 = EDGE_CURVE('',#292117,#292149,#292157,.T.); +#292157 = CIRCLE('',#292158,0.100000456609); +#292158 = AXIS2_PLACEMENT_3D('',#292159,#292160,#292161); +#292159 = CARTESIAN_POINT('',(130.25,-112.5,1.51)); +#292160 = DIRECTION('',(0.,0.,-1.)); +#292161 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#292162 = CYLINDRICAL_SURFACE('',#292163,0.100000456609); +#292163 = AXIS2_PLACEMENT_3D('',#292164,#292165,#292166); +#292164 = CARTESIAN_POINT('',(130.25,-112.5,1.51)); +#292165 = DIRECTION('',(0.,0.,-1.)); +#292166 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#292167 = ADVANCED_FACE('',(#292168),#292193,.T.); +#292168 = FACE_BOUND('',#292169,.T.); +#292169 = EDGE_LOOP('',(#292170,#292171,#292179,#292187)); +#292170 = ORIENTED_EDGE('',*,*,#292148,.T.); +#292171 = ORIENTED_EDGE('',*,*,#292172,.T.); +#292172 = EDGE_CURVE('',#292140,#292173,#292175,.T.); +#292173 = VERTEX_POINT('',#292174); +#292174 = CARTESIAN_POINT('',(130.458578,-112.4,1.545)); +#292175 = LINE('',#292176,#292177); +#292176 = CARTESIAN_POINT('',(130.230491,-112.401921,1.545)); +#292177 = VECTOR('',#292178,1.); +#292178 = DIRECTION('',(0.999964534951,8.421926158163E-03,0.)); +#292179 = ORIENTED_EDGE('',*,*,#292180,.F.); +#292180 = EDGE_CURVE('',#292181,#292173,#292183,.T.); +#292181 = VERTEX_POINT('',#292182); +#292182 = CARTESIAN_POINT('',(130.458578,-112.4,1.51)); +#292183 = LINE('',#292184,#292185); +#292184 = CARTESIAN_POINT('',(130.458578,-112.4,1.51)); +#292185 = VECTOR('',#292186,1.); +#292186 = DIRECTION('',(0.,0.,1.)); +#292187 = ORIENTED_EDGE('',*,*,#292188,.F.); +#292188 = EDGE_CURVE('',#292149,#292181,#292189,.T.); +#292189 = LINE('',#292190,#292191); +#292190 = CARTESIAN_POINT('',(130.230491,-112.401921,1.51)); +#292191 = VECTOR('',#292192,1.); +#292192 = DIRECTION('',(0.999964534951,8.421926158163E-03,0.)); +#292193 = PLANE('',#292194); +#292194 = AXIS2_PLACEMENT_3D('',#292195,#292196,#292197); +#292195 = CARTESIAN_POINT('',(130.230491,-112.401921,1.51)); +#292196 = DIRECTION('',(-8.421926158163E-03,0.999964534951,0.)); +#292197 = DIRECTION('',(0.999964534951,8.421926158163E-03,0.)); +#292198 = ADVANCED_FACE('',(#292199),#292224,.T.); +#292199 = FACE_BOUND('',#292200,.T.); +#292200 = EDGE_LOOP('',(#292201,#292202,#292210,#292218)); +#292201 = ORIENTED_EDGE('',*,*,#292180,.T.); +#292202 = ORIENTED_EDGE('',*,*,#292203,.T.); +#292203 = EDGE_CURVE('',#292173,#292204,#292206,.T.); +#292204 = VERTEX_POINT('',#292205); +#292205 = CARTESIAN_POINT('',(130.95,-111.908578,1.545)); +#292206 = LINE('',#292207,#292208); +#292207 = CARTESIAN_POINT('',(130.458578,-112.4,1.545)); +#292208 = VECTOR('',#292209,1.); +#292209 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#292210 = ORIENTED_EDGE('',*,*,#292211,.F.); +#292211 = EDGE_CURVE('',#292212,#292204,#292214,.T.); +#292212 = VERTEX_POINT('',#292213); +#292213 = CARTESIAN_POINT('',(130.95,-111.908578,1.51)); +#292214 = LINE('',#292215,#292216); +#292215 = CARTESIAN_POINT('',(130.95,-111.908578,1.51)); +#292216 = VECTOR('',#292217,1.); +#292217 = DIRECTION('',(0.,0.,1.)); +#292218 = ORIENTED_EDGE('',*,*,#292219,.F.); +#292219 = EDGE_CURVE('',#292181,#292212,#292220,.T.); +#292220 = LINE('',#292221,#292222); +#292221 = CARTESIAN_POINT('',(130.458578,-112.4,1.51)); +#292222 = VECTOR('',#292223,1.); +#292223 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#292224 = PLANE('',#292225); +#292225 = AXIS2_PLACEMENT_3D('',#292226,#292227,#292228); +#292226 = CARTESIAN_POINT('',(130.458578,-112.4,1.51)); +#292227 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#292228 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#292229 = ADVANCED_FACE('',(#292230),#292255,.T.); +#292230 = FACE_BOUND('',#292231,.T.); +#292231 = EDGE_LOOP('',(#292232,#292233,#292241,#292249)); +#292232 = ORIENTED_EDGE('',*,*,#292211,.T.); +#292233 = ORIENTED_EDGE('',*,*,#292234,.T.); +#292234 = EDGE_CURVE('',#292204,#292235,#292237,.T.); +#292235 = VERTEX_POINT('',#292236); +#292236 = CARTESIAN_POINT('',(130.95,-111.48113,1.545)); +#292237 = LINE('',#292238,#292239); +#292238 = CARTESIAN_POINT('',(130.95,-111.908578,1.545)); +#292239 = VECTOR('',#292240,1.); +#292240 = DIRECTION('',(0.,1.,0.)); +#292241 = ORIENTED_EDGE('',*,*,#292242,.F.); +#292242 = EDGE_CURVE('',#292243,#292235,#292245,.T.); +#292243 = VERTEX_POINT('',#292244); +#292244 = CARTESIAN_POINT('',(130.95,-111.48113,1.51)); +#292245 = LINE('',#292246,#292247); +#292246 = CARTESIAN_POINT('',(130.95,-111.48113,1.51)); +#292247 = VECTOR('',#292248,1.); +#292248 = DIRECTION('',(0.,0.,1.)); +#292249 = ORIENTED_EDGE('',*,*,#292250,.F.); +#292250 = EDGE_CURVE('',#292212,#292243,#292251,.T.); +#292251 = LINE('',#292252,#292253); +#292252 = CARTESIAN_POINT('',(130.95,-111.908578,1.51)); +#292253 = VECTOR('',#292254,1.); +#292254 = DIRECTION('',(0.,1.,0.)); +#292255 = PLANE('',#292256); +#292256 = AXIS2_PLACEMENT_3D('',#292257,#292258,#292259); +#292257 = CARTESIAN_POINT('',(130.95,-111.908578,1.51)); +#292258 = DIRECTION('',(-1.,0.,0.)); +#292259 = DIRECTION('',(0.,1.,0.)); +#292260 = ADVANCED_FACE('',(#292261),#292286,.T.); +#292261 = FACE_BOUND('',#292262,.T.); +#292262 = EDGE_LOOP('',(#292263,#292264,#292272,#292280)); +#292263 = ORIENTED_EDGE('',*,*,#292242,.T.); +#292264 = ORIENTED_EDGE('',*,*,#292265,.T.); +#292265 = EDGE_CURVE('',#292235,#292266,#292268,.T.); +#292266 = VERTEX_POINT('',#292267); +#292267 = CARTESIAN_POINT('',(130.935195,-111.477164,1.545)); +#292268 = LINE('',#292269,#292270); +#292269 = CARTESIAN_POINT('',(130.95,-111.48113,1.545)); +#292270 = VECTOR('',#292271,1.); +#292271 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#292272 = ORIENTED_EDGE('',*,*,#292273,.F.); +#292273 = EDGE_CURVE('',#292274,#292266,#292276,.T.); +#292274 = VERTEX_POINT('',#292275); +#292275 = CARTESIAN_POINT('',(130.935195,-111.477164,1.51)); +#292276 = LINE('',#292277,#292278); +#292277 = CARTESIAN_POINT('',(130.935195,-111.477164,1.51)); +#292278 = VECTOR('',#292279,1.); +#292279 = DIRECTION('',(0.,0.,1.)); +#292280 = ORIENTED_EDGE('',*,*,#292281,.F.); +#292281 = EDGE_CURVE('',#292243,#292274,#292282,.T.); +#292282 = LINE('',#292283,#292284); +#292283 = CARTESIAN_POINT('',(130.95,-111.48113,1.51)); +#292284 = VECTOR('',#292285,1.); +#292285 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#292286 = PLANE('',#292287); +#292287 = AXIS2_PLACEMENT_3D('',#292288,#292289,#292290); +#292288 = CARTESIAN_POINT('',(130.95,-111.48113,1.51)); +#292289 = DIRECTION('',(-0.258758913864,-0.9659419364,0.)); +#292290 = DIRECTION('',(-0.9659419364,0.258758913864,0.)); +#292291 = ADVANCED_FACE('',(#292292),#292319,.T.); +#292292 = FACE_BOUND('',#292293,.T.); +#292293 = EDGE_LOOP('',(#292294,#292295,#292304,#292312)); +#292294 = ORIENTED_EDGE('',*,*,#292273,.T.); +#292295 = ORIENTED_EDGE('',*,*,#292296,.T.); +#292296 = EDGE_CURVE('',#292266,#292297,#292299,.T.); +#292297 = VERTEX_POINT('',#292298); +#292298 = CARTESIAN_POINT('',(131.164805,-111.477164,1.545)); +#292299 = CIRCLE('',#292300,0.299999472923); +#292300 = AXIS2_PLACEMENT_3D('',#292301,#292302,#292303); +#292301 = CARTESIAN_POINT('',(131.05,-111.2000006984,1.545)); +#292302 = DIRECTION('',(0.,0.,-1.)); +#292303 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#292304 = ORIENTED_EDGE('',*,*,#292305,.F.); +#292305 = EDGE_CURVE('',#292306,#292297,#292308,.T.); +#292306 = VERTEX_POINT('',#292307); +#292307 = CARTESIAN_POINT('',(131.164805,-111.477164,1.51)); +#292308 = LINE('',#292309,#292310); +#292309 = CARTESIAN_POINT('',(131.164805,-111.477164,1.51)); +#292310 = VECTOR('',#292311,1.); +#292311 = DIRECTION('',(0.,0.,1.)); +#292312 = ORIENTED_EDGE('',*,*,#292313,.F.); +#292313 = EDGE_CURVE('',#292274,#292306,#292314,.T.); +#292314 = CIRCLE('',#292315,0.299999472923); +#292315 = AXIS2_PLACEMENT_3D('',#292316,#292317,#292318); +#292316 = CARTESIAN_POINT('',(131.05,-111.2000006984,1.51)); +#292317 = DIRECTION('',(0.,0.,-1.)); +#292318 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#292319 = CYLINDRICAL_SURFACE('',#292320,0.299999472923); +#292320 = AXIS2_PLACEMENT_3D('',#292321,#292322,#292323); +#292321 = CARTESIAN_POINT('',(131.05,-111.2000006984,1.51)); +#292322 = DIRECTION('',(0.,0.,-1.)); +#292323 = DIRECTION('',(-0.38268400568,-0.923879295036,-0.)); +#292324 = ADVANCED_FACE('',(#292325),#292341,.T.); +#292325 = FACE_BOUND('',#292326,.T.); +#292326 = EDGE_LOOP('',(#292327,#292328,#292334,#292335)); +#292327 = ORIENTED_EDGE('',*,*,#292305,.T.); +#292328 = ORIENTED_EDGE('',*,*,#292329,.T.); +#292329 = EDGE_CURVE('',#292297,#291977,#292330,.T.); +#292330 = LINE('',#292331,#292332); +#292331 = CARTESIAN_POINT('',(131.164805,-111.477164,1.545)); +#292332 = VECTOR('',#292333,1.); +#292333 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#292334 = ORIENTED_EDGE('',*,*,#291974,.F.); +#292335 = ORIENTED_EDGE('',*,*,#292336,.F.); +#292336 = EDGE_CURVE('',#292306,#291975,#292337,.T.); +#292337 = LINE('',#292338,#292339); +#292338 = CARTESIAN_POINT('',(131.164805,-111.477164,1.51)); +#292339 = VECTOR('',#292340,1.); +#292340 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#292341 = PLANE('',#292342); +#292342 = AXIS2_PLACEMENT_3D('',#292343,#292344,#292345); +#292343 = CARTESIAN_POINT('',(131.164805,-111.477164,1.51)); +#292344 = DIRECTION('',(0.258758913864,-0.9659419364,0.)); +#292345 = DIRECTION('',(-0.9659419364,-0.258758913864,0.)); +#292346 = ADVANCED_FACE('',(#292347),#292374,.F.); +#292347 = FACE_BOUND('',#292348,.T.); +#292348 = EDGE_LOOP('',(#292349,#292359,#292366,#292367)); +#292349 = ORIENTED_EDGE('',*,*,#292350,.T.); +#292350 = EDGE_CURVE('',#292351,#292353,#292355,.T.); +#292351 = VERTEX_POINT('',#292352); +#292352 = CARTESIAN_POINT('',(131.187255,-111.2,1.51)); +#292353 = VERTEX_POINT('',#292354); +#292354 = CARTESIAN_POINT('',(131.187255,-111.2,1.545)); +#292355 = LINE('',#292356,#292357); +#292356 = CARTESIAN_POINT('',(131.187255,-111.2,1.51)); +#292357 = VECTOR('',#292358,1.); +#292358 = DIRECTION('',(0.,0.,1.)); +#292359 = ORIENTED_EDGE('',*,*,#292360,.T.); +#292360 = EDGE_CURVE('',#292353,#292353,#292361,.T.); +#292361 = CIRCLE('',#292362,0.137255); +#292362 = AXIS2_PLACEMENT_3D('',#292363,#292364,#292365); +#292363 = CARTESIAN_POINT('',(131.05,-111.2,1.545)); +#292364 = DIRECTION('',(0.,0.,1.)); +#292365 = DIRECTION('',(1.,0.,-0.)); +#292366 = ORIENTED_EDGE('',*,*,#292350,.F.); +#292367 = ORIENTED_EDGE('',*,*,#292368,.F.); +#292368 = EDGE_CURVE('',#292351,#292351,#292369,.T.); +#292369 = CIRCLE('',#292370,0.137255); +#292370 = AXIS2_PLACEMENT_3D('',#292371,#292372,#292373); +#292371 = CARTESIAN_POINT('',(131.05,-111.2,1.51)); +#292372 = DIRECTION('',(0.,0.,1.)); +#292373 = DIRECTION('',(1.,0.,-0.)); +#292374 = CYLINDRICAL_SURFACE('',#292375,0.137255); +#292375 = AXIS2_PLACEMENT_3D('',#292376,#292377,#292378); +#292376 = CARTESIAN_POINT('',(131.05,-111.2,1.51)); +#292377 = DIRECTION('',(-0.,-0.,-1.)); +#292378 = DIRECTION('',(1.,0.,-0.)); +#292379 = ADVANCED_FACE('',(#292380,#292394),#292397,.F.); +#292380 = FACE_BOUND('',#292381,.T.); +#292381 = EDGE_LOOP('',(#292382,#292383,#292384,#292385,#292386,#292387, + #292388,#292389,#292390,#292391,#292392,#292393)); +#292382 = ORIENTED_EDGE('',*,*,#292000,.T.); +#292383 = ORIENTED_EDGE('',*,*,#292031,.T.); +#292384 = ORIENTED_EDGE('',*,*,#292062,.T.); +#292385 = ORIENTED_EDGE('',*,*,#292093,.T.); +#292386 = ORIENTED_EDGE('',*,*,#292124,.T.); +#292387 = ORIENTED_EDGE('',*,*,#292156,.T.); +#292388 = ORIENTED_EDGE('',*,*,#292188,.T.); +#292389 = ORIENTED_EDGE('',*,*,#292219,.T.); +#292390 = ORIENTED_EDGE('',*,*,#292250,.T.); +#292391 = ORIENTED_EDGE('',*,*,#292281,.T.); +#292392 = ORIENTED_EDGE('',*,*,#292313,.T.); +#292393 = ORIENTED_EDGE('',*,*,#292336,.T.); +#292394 = FACE_BOUND('',#292395,.T.); +#292395 = EDGE_LOOP('',(#292396)); +#292396 = ORIENTED_EDGE('',*,*,#292368,.T.); +#292397 = PLANE('',#292398); +#292398 = AXIS2_PLACEMENT_3D('',#292399,#292400,#292401); +#292399 = CARTESIAN_POINT('',(0.,0.,1.51)); +#292400 = DIRECTION('',(0.,0.,1.)); +#292401 = DIRECTION('',(1.,0.,-0.)); +#292402 = ADVANCED_FACE('',(#292403,#292417),#292420,.T.); +#292403 = FACE_BOUND('',#292404,.F.); +#292404 = EDGE_LOOP('',(#292405,#292406,#292407,#292408,#292409,#292410, + #292411,#292412,#292413,#292414,#292415,#292416)); +#292405 = ORIENTED_EDGE('',*,*,#291984,.T.); +#292406 = ORIENTED_EDGE('',*,*,#292015,.T.); +#292407 = ORIENTED_EDGE('',*,*,#292046,.T.); +#292408 = ORIENTED_EDGE('',*,*,#292077,.T.); +#292409 = ORIENTED_EDGE('',*,*,#292108,.T.); +#292410 = ORIENTED_EDGE('',*,*,#292139,.T.); +#292411 = ORIENTED_EDGE('',*,*,#292172,.T.); +#292412 = ORIENTED_EDGE('',*,*,#292203,.T.); +#292413 = ORIENTED_EDGE('',*,*,#292234,.T.); +#292414 = ORIENTED_EDGE('',*,*,#292265,.T.); +#292415 = ORIENTED_EDGE('',*,*,#292296,.T.); +#292416 = ORIENTED_EDGE('',*,*,#292329,.T.); +#292417 = FACE_BOUND('',#292418,.F.); +#292418 = EDGE_LOOP('',(#292419)); +#292419 = ORIENTED_EDGE('',*,*,#292360,.T.); +#292420 = PLANE('',#292421); +#292421 = AXIS2_PLACEMENT_3D('',#292422,#292423,#292424); +#292422 = CARTESIAN_POINT('',(0.,0.,1.545)); +#292423 = DIRECTION('',(0.,0.,1.)); +#292424 = DIRECTION('',(1.,0.,-0.)); +#292425 = MANIFOLD_SOLID_BREP('',#292426); +#292426 = CLOSED_SHELL('',(#292427,#292460,#292493,#292505)); +#292427 = ADVANCED_FACE('',(#292428),#292455,.T.); +#292428 = FACE_BOUND('',#292429,.F.); +#292429 = EDGE_LOOP('',(#292430,#292440,#292447,#292448)); +#292430 = ORIENTED_EDGE('',*,*,#292431,.T.); +#292431 = EDGE_CURVE('',#292432,#292434,#292436,.T.); +#292432 = VERTEX_POINT('',#292433); +#292433 = CARTESIAN_POINT('',(121.8,-112.,1.51)); +#292434 = VERTEX_POINT('',#292435); +#292435 = CARTESIAN_POINT('',(121.8,-112.,1.545)); +#292436 = LINE('',#292437,#292438); +#292437 = CARTESIAN_POINT('',(121.8,-112.,1.51)); +#292438 = VECTOR('',#292439,1.); +#292439 = DIRECTION('',(0.,0.,1.)); +#292440 = ORIENTED_EDGE('',*,*,#292441,.T.); +#292441 = EDGE_CURVE('',#292434,#292434,#292442,.T.); +#292442 = CIRCLE('',#292443,0.3); +#292443 = AXIS2_PLACEMENT_3D('',#292444,#292445,#292446); +#292444 = CARTESIAN_POINT('',(121.5,-112.,1.545)); +#292445 = DIRECTION('',(0.,0.,1.)); +#292446 = DIRECTION('',(1.,0.,-0.)); +#292447 = ORIENTED_EDGE('',*,*,#292431,.F.); +#292448 = ORIENTED_EDGE('',*,*,#292449,.F.); +#292449 = EDGE_CURVE('',#292432,#292432,#292450,.T.); +#292450 = CIRCLE('',#292451,0.3); +#292451 = AXIS2_PLACEMENT_3D('',#292452,#292453,#292454); +#292452 = CARTESIAN_POINT('',(121.5,-112.,1.51)); +#292453 = DIRECTION('',(0.,0.,1.)); +#292454 = DIRECTION('',(1.,0.,-0.)); +#292455 = CYLINDRICAL_SURFACE('',#292456,0.3); +#292456 = AXIS2_PLACEMENT_3D('',#292457,#292458,#292459); +#292457 = CARTESIAN_POINT('',(121.5,-112.,1.51)); +#292458 = DIRECTION('',(-0.,-0.,-1.)); +#292459 = DIRECTION('',(1.,0.,-0.)); +#292460 = ADVANCED_FACE('',(#292461),#292488,.F.); +#292461 = FACE_BOUND('',#292462,.T.); +#292462 = EDGE_LOOP('',(#292463,#292473,#292480,#292481)); +#292463 = ORIENTED_EDGE('',*,*,#292464,.T.); +#292464 = EDGE_CURVE('',#292465,#292467,#292469,.T.); +#292465 = VERTEX_POINT('',#292466); +#292466 = CARTESIAN_POINT('',(121.637255,-112.,1.51)); +#292467 = VERTEX_POINT('',#292468); +#292468 = CARTESIAN_POINT('',(121.637255,-112.,1.545)); +#292469 = LINE('',#292470,#292471); +#292470 = CARTESIAN_POINT('',(121.637255,-112.,1.51)); +#292471 = VECTOR('',#292472,1.); +#292472 = DIRECTION('',(0.,0.,1.)); +#292473 = ORIENTED_EDGE('',*,*,#292474,.T.); +#292474 = EDGE_CURVE('',#292467,#292467,#292475,.T.); +#292475 = CIRCLE('',#292476,0.137255); +#292476 = AXIS2_PLACEMENT_3D('',#292477,#292478,#292479); +#292477 = CARTESIAN_POINT('',(121.5,-112.,1.545)); +#292478 = DIRECTION('',(0.,0.,1.)); +#292479 = DIRECTION('',(1.,0.,-0.)); +#292480 = ORIENTED_EDGE('',*,*,#292464,.F.); +#292481 = ORIENTED_EDGE('',*,*,#292482,.F.); +#292482 = EDGE_CURVE('',#292465,#292465,#292483,.T.); +#292483 = CIRCLE('',#292484,0.137255); +#292484 = AXIS2_PLACEMENT_3D('',#292485,#292486,#292487); +#292485 = CARTESIAN_POINT('',(121.5,-112.,1.51)); +#292486 = DIRECTION('',(0.,0.,1.)); +#292487 = DIRECTION('',(1.,0.,-0.)); +#292488 = CYLINDRICAL_SURFACE('',#292489,0.137255); +#292489 = AXIS2_PLACEMENT_3D('',#292490,#292491,#292492); +#292490 = CARTESIAN_POINT('',(121.5,-112.,1.51)); +#292491 = DIRECTION('',(-0.,-0.,-1.)); +#292492 = DIRECTION('',(1.,0.,-0.)); +#292493 = ADVANCED_FACE('',(#292494,#292497),#292500,.F.); +#292494 = FACE_BOUND('',#292495,.F.); +#292495 = EDGE_LOOP('',(#292496)); +#292496 = ORIENTED_EDGE('',*,*,#292449,.T.); +#292497 = FACE_BOUND('',#292498,.T.); +#292498 = EDGE_LOOP('',(#292499)); +#292499 = ORIENTED_EDGE('',*,*,#292482,.T.); +#292500 = PLANE('',#292501); +#292501 = AXIS2_PLACEMENT_3D('',#292502,#292503,#292504); +#292502 = CARTESIAN_POINT('',(0.,0.,1.51)); +#292503 = DIRECTION('',(0.,0.,1.)); +#292504 = DIRECTION('',(1.,0.,-0.)); +#292505 = ADVANCED_FACE('',(#292506,#292509),#292512,.T.); +#292506 = FACE_BOUND('',#292507,.T.); +#292507 = EDGE_LOOP('',(#292508)); +#292508 = ORIENTED_EDGE('',*,*,#292441,.T.); +#292509 = FACE_BOUND('',#292510,.F.); +#292510 = EDGE_LOOP('',(#292511)); +#292511 = ORIENTED_EDGE('',*,*,#292474,.T.); +#292512 = PLANE('',#292513); +#292513 = AXIS2_PLACEMENT_3D('',#292514,#292515,#292516); +#292514 = CARTESIAN_POINT('',(0.,0.,1.545)); +#292515 = DIRECTION('',(0.,0.,1.)); +#292516 = DIRECTION('',(1.,0.,-0.)); +#292517 = MANIFOLD_SOLID_BREP('',#292518); +#292518 = CLOSED_SHELL('',(#292519,#292552,#292585,#292597)); +#292519 = ADVANCED_FACE('',(#292520),#292547,.T.); +#292520 = FACE_BOUND('',#292521,.F.); +#292521 = EDGE_LOOP('',(#292522,#292532,#292539,#292540)); +#292522 = ORIENTED_EDGE('',*,*,#292523,.T.); +#292523 = EDGE_CURVE('',#292524,#292526,#292528,.T.); +#292524 = VERTEX_POINT('',#292525); +#292525 = CARTESIAN_POINT('',(128.3,-105.5,1.51)); +#292526 = VERTEX_POINT('',#292527); +#292527 = CARTESIAN_POINT('',(128.3,-105.5,1.545)); +#292528 = LINE('',#292529,#292530); +#292529 = CARTESIAN_POINT('',(128.3,-105.5,1.51)); +#292530 = VECTOR('',#292531,1.); +#292531 = DIRECTION('',(0.,0.,1.)); +#292532 = ORIENTED_EDGE('',*,*,#292533,.T.); +#292533 = EDGE_CURVE('',#292526,#292526,#292534,.T.); +#292534 = CIRCLE('',#292535,0.3); +#292535 = AXIS2_PLACEMENT_3D('',#292536,#292537,#292538); +#292536 = CARTESIAN_POINT('',(128.,-105.5,1.545)); +#292537 = DIRECTION('',(0.,0.,1.)); +#292538 = DIRECTION('',(1.,0.,-0.)); +#292539 = ORIENTED_EDGE('',*,*,#292523,.F.); +#292540 = ORIENTED_EDGE('',*,*,#292541,.F.); +#292541 = EDGE_CURVE('',#292524,#292524,#292542,.T.); +#292542 = CIRCLE('',#292543,0.3); +#292543 = AXIS2_PLACEMENT_3D('',#292544,#292545,#292546); +#292544 = CARTESIAN_POINT('',(128.,-105.5,1.51)); +#292545 = DIRECTION('',(0.,0.,1.)); +#292546 = DIRECTION('',(1.,0.,-0.)); +#292547 = CYLINDRICAL_SURFACE('',#292548,0.3); +#292548 = AXIS2_PLACEMENT_3D('',#292549,#292550,#292551); +#292549 = CARTESIAN_POINT('',(128.,-105.5,1.51)); +#292550 = DIRECTION('',(-0.,-0.,-1.)); +#292551 = DIRECTION('',(1.,0.,-0.)); +#292552 = ADVANCED_FACE('',(#292553),#292580,.F.); +#292553 = FACE_BOUND('',#292554,.T.); +#292554 = EDGE_LOOP('',(#292555,#292565,#292572,#292573)); +#292555 = ORIENTED_EDGE('',*,*,#292556,.T.); +#292556 = EDGE_CURVE('',#292557,#292559,#292561,.T.); +#292557 = VERTEX_POINT('',#292558); +#292558 = CARTESIAN_POINT('',(128.137255,-105.5,1.51)); +#292559 = VERTEX_POINT('',#292560); +#292560 = CARTESIAN_POINT('',(128.137255,-105.5,1.545)); +#292561 = LINE('',#292562,#292563); +#292562 = CARTESIAN_POINT('',(128.137255,-105.5,1.51)); +#292563 = VECTOR('',#292564,1.); +#292564 = DIRECTION('',(0.,0.,1.)); +#292565 = ORIENTED_EDGE('',*,*,#292566,.T.); +#292566 = EDGE_CURVE('',#292559,#292559,#292567,.T.); +#292567 = CIRCLE('',#292568,0.137255); +#292568 = AXIS2_PLACEMENT_3D('',#292569,#292570,#292571); +#292569 = CARTESIAN_POINT('',(128.,-105.5,1.545)); +#292570 = DIRECTION('',(0.,0.,1.)); +#292571 = DIRECTION('',(1.,0.,-0.)); +#292572 = ORIENTED_EDGE('',*,*,#292556,.F.); +#292573 = ORIENTED_EDGE('',*,*,#292574,.F.); +#292574 = EDGE_CURVE('',#292557,#292557,#292575,.T.); +#292575 = CIRCLE('',#292576,0.137255); +#292576 = AXIS2_PLACEMENT_3D('',#292577,#292578,#292579); +#292577 = CARTESIAN_POINT('',(128.,-105.5,1.51)); +#292578 = DIRECTION('',(0.,0.,1.)); +#292579 = DIRECTION('',(1.,0.,-0.)); +#292580 = CYLINDRICAL_SURFACE('',#292581,0.137255); +#292581 = AXIS2_PLACEMENT_3D('',#292582,#292583,#292584); +#292582 = CARTESIAN_POINT('',(128.,-105.5,1.51)); +#292583 = DIRECTION('',(-0.,-0.,-1.)); +#292584 = DIRECTION('',(1.,0.,-0.)); +#292585 = ADVANCED_FACE('',(#292586,#292589),#292592,.F.); +#292586 = FACE_BOUND('',#292587,.F.); +#292587 = EDGE_LOOP('',(#292588)); +#292588 = ORIENTED_EDGE('',*,*,#292541,.T.); +#292589 = FACE_BOUND('',#292590,.T.); +#292590 = EDGE_LOOP('',(#292591)); +#292591 = ORIENTED_EDGE('',*,*,#292574,.T.); +#292592 = PLANE('',#292593); +#292593 = AXIS2_PLACEMENT_3D('',#292594,#292595,#292596); +#292594 = CARTESIAN_POINT('',(0.,0.,1.51)); +#292595 = DIRECTION('',(0.,0.,1.)); +#292596 = DIRECTION('',(1.,0.,-0.)); +#292597 = ADVANCED_FACE('',(#292598,#292601),#292604,.T.); +#292598 = FACE_BOUND('',#292599,.T.); +#292599 = EDGE_LOOP('',(#292600)); +#292600 = ORIENTED_EDGE('',*,*,#292533,.T.); +#292601 = FACE_BOUND('',#292602,.F.); +#292602 = EDGE_LOOP('',(#292603)); +#292603 = ORIENTED_EDGE('',*,*,#292566,.T.); +#292604 = PLANE('',#292605); +#292605 = AXIS2_PLACEMENT_3D('',#292606,#292607,#292608); +#292606 = CARTESIAN_POINT('',(0.,0.,1.545)); +#292607 = DIRECTION('',(0.,0.,1.)); +#292608 = DIRECTION('',(1.,0.,-0.)); +#292609 = MANIFOLD_SOLID_BREP('',#292610); +#292610 = CLOSED_SHELL('',(#292611,#292651,#292682,#292713,#292744, + #292775,#292806,#292837,#292868,#292899,#292930,#292963,#292985, + #293018,#293041)); +#292611 = ADVANCED_FACE('',(#292612),#292646,.T.); +#292612 = FACE_BOUND('',#292613,.T.); +#292613 = EDGE_LOOP('',(#292614,#292624,#292632,#292640)); +#292614 = ORIENTED_EDGE('',*,*,#292615,.T.); +#292615 = EDGE_CURVE('',#292616,#292618,#292620,.T.); +#292616 = VERTEX_POINT('',#292617); +#292617 = CARTESIAN_POINT('',(134.871921,-104.2695,1.51)); +#292618 = VERTEX_POINT('',#292619); +#292619 = CARTESIAN_POINT('',(134.871921,-104.2695,1.545)); +#292620 = LINE('',#292621,#292622); +#292621 = CARTESIAN_POINT('',(134.871921,-104.2695,1.51)); +#292622 = VECTOR('',#292623,1.); +#292623 = DIRECTION('',(0.,0.,1.)); +#292624 = ORIENTED_EDGE('',*,*,#292625,.T.); +#292625 = EDGE_CURVE('',#292618,#292626,#292628,.T.); +#292626 = VERTEX_POINT('',#292627); +#292627 = CARTESIAN_POINT('',(134.35,-104.791422,1.545)); +#292628 = LINE('',#292629,#292630); +#292629 = CARTESIAN_POINT('',(134.871921,-104.2695,1.545)); +#292630 = VECTOR('',#292631,1.); +#292631 = DIRECTION('',(-0.707106103779,-0.707107458593,0.)); +#292632 = ORIENTED_EDGE('',*,*,#292633,.F.); +#292633 = EDGE_CURVE('',#292634,#292626,#292636,.T.); +#292634 = VERTEX_POINT('',#292635); +#292635 = CARTESIAN_POINT('',(134.35,-104.791422,1.51)); +#292636 = LINE('',#292637,#292638); +#292637 = CARTESIAN_POINT('',(134.35,-104.791422,1.51)); +#292638 = VECTOR('',#292639,1.); +#292639 = DIRECTION('',(0.,0.,1.)); +#292640 = ORIENTED_EDGE('',*,*,#292641,.F.); +#292641 = EDGE_CURVE('',#292616,#292634,#292642,.T.); +#292642 = LINE('',#292643,#292644); +#292643 = CARTESIAN_POINT('',(134.871921,-104.2695,1.51)); +#292644 = VECTOR('',#292645,1.); +#292645 = DIRECTION('',(-0.707106103779,-0.707107458593,0.)); +#292646 = PLANE('',#292647); +#292647 = AXIS2_PLACEMENT_3D('',#292648,#292649,#292650); +#292648 = CARTESIAN_POINT('',(134.871921,-104.2695,1.51)); +#292649 = DIRECTION('',(0.707107458593,-0.707106103779,0.)); +#292650 = DIRECTION('',(-0.707106103779,-0.707107458593,0.)); +#292651 = ADVANCED_FACE('',(#292652),#292677,.T.); +#292652 = FACE_BOUND('',#292653,.T.); +#292653 = EDGE_LOOP('',(#292654,#292655,#292663,#292671)); +#292654 = ORIENTED_EDGE('',*,*,#292633,.T.); +#292655 = ORIENTED_EDGE('',*,*,#292656,.T.); +#292656 = EDGE_CURVE('',#292626,#292657,#292659,.T.); +#292657 = VERTEX_POINT('',#292658); +#292658 = CARTESIAN_POINT('',(134.349717,-104.898403,1.545)); +#292659 = LINE('',#292660,#292661); +#292660 = CARTESIAN_POINT('',(134.35,-104.791422,1.545)); +#292661 = VECTOR('',#292662,1.); +#292662 = DIRECTION('',(-2.645320288808E-03,-0.999996501134,0.)); +#292663 = ORIENTED_EDGE('',*,*,#292664,.F.); +#292664 = EDGE_CURVE('',#292665,#292657,#292667,.T.); +#292665 = VERTEX_POINT('',#292666); +#292666 = CARTESIAN_POINT('',(134.349717,-104.898403,1.51)); +#292667 = LINE('',#292668,#292669); +#292668 = CARTESIAN_POINT('',(134.349717,-104.898403,1.51)); +#292669 = VECTOR('',#292670,1.); +#292670 = DIRECTION('',(0.,0.,1.)); +#292671 = ORIENTED_EDGE('',*,*,#292672,.F.); +#292672 = EDGE_CURVE('',#292634,#292665,#292673,.T.); +#292673 = LINE('',#292674,#292675); +#292674 = CARTESIAN_POINT('',(134.35,-104.791422,1.51)); +#292675 = VECTOR('',#292676,1.); +#292676 = DIRECTION('',(-2.645320288808E-03,-0.999996501134,0.)); +#292677 = PLANE('',#292678); +#292678 = AXIS2_PLACEMENT_3D('',#292679,#292680,#292681); +#292679 = CARTESIAN_POINT('',(134.35,-104.791422,1.51)); +#292680 = DIRECTION('',(0.999996501134,-2.645320288808E-03,0.)); +#292681 = DIRECTION('',(-2.645320288808E-03,-0.999996501134,0.)); +#292682 = ADVANCED_FACE('',(#292683),#292708,.T.); +#292683 = FACE_BOUND('',#292684,.T.); +#292684 = EDGE_LOOP('',(#292685,#292686,#292694,#292702)); +#292685 = ORIENTED_EDGE('',*,*,#292664,.T.); +#292686 = ORIENTED_EDGE('',*,*,#292687,.T.); +#292687 = EDGE_CURVE('',#292657,#292688,#292690,.T.); +#292688 = VERTEX_POINT('',#292689); +#292689 = CARTESIAN_POINT('',(134.309725,-104.890449,1.545)); +#292690 = LINE('',#292691,#292692); +#292691 = CARTESIAN_POINT('',(134.349717,-104.898403,1.545)); +#292692 = VECTOR('',#292693,1.); +#292693 = DIRECTION('',(-0.980789519437,0.195069009742,0.)); +#292694 = ORIENTED_EDGE('',*,*,#292695,.F.); +#292695 = EDGE_CURVE('',#292696,#292688,#292698,.T.); +#292696 = VERTEX_POINT('',#292697); +#292697 = CARTESIAN_POINT('',(134.309725,-104.890449,1.51)); +#292698 = LINE('',#292699,#292700); +#292699 = CARTESIAN_POINT('',(134.309725,-104.890449,1.51)); +#292700 = VECTOR('',#292701,1.); +#292701 = DIRECTION('',(0.,0.,1.)); +#292702 = ORIENTED_EDGE('',*,*,#292703,.F.); +#292703 = EDGE_CURVE('',#292665,#292696,#292704,.T.); +#292704 = LINE('',#292705,#292706); +#292705 = CARTESIAN_POINT('',(134.349717,-104.898403,1.51)); +#292706 = VECTOR('',#292707,1.); +#292707 = DIRECTION('',(-0.980789519437,0.195069009742,0.)); +#292708 = PLANE('',#292709); +#292709 = AXIS2_PLACEMENT_3D('',#292710,#292711,#292712); +#292710 = CARTESIAN_POINT('',(134.349717,-104.898403,1.51)); +#292711 = DIRECTION('',(-0.195069009742,-0.980789519437,0.)); +#292712 = DIRECTION('',(-0.980789519437,0.195069009742,0.)); +#292713 = ADVANCED_FACE('',(#292714),#292739,.T.); +#292714 = FACE_BOUND('',#292715,.T.); +#292715 = EDGE_LOOP('',(#292716,#292717,#292725,#292733)); +#292716 = ORIENTED_EDGE('',*,*,#292695,.T.); +#292717 = ORIENTED_EDGE('',*,*,#292718,.T.); +#292718 = EDGE_CURVE('',#292688,#292719,#292721,.T.); +#292719 = VERTEX_POINT('',#292720); +#292720 = CARTESIAN_POINT('',(134.25,-104.887515,1.545)); +#292721 = LINE('',#292722,#292723); +#292722 = CARTESIAN_POINT('',(134.309725,-104.890449,1.545)); +#292723 = VECTOR('',#292724,1.); +#292724 = DIRECTION('',(-0.998795539066,4.906598763716E-02,0.)); +#292725 = ORIENTED_EDGE('',*,*,#292726,.F.); +#292726 = EDGE_CURVE('',#292727,#292719,#292729,.T.); +#292727 = VERTEX_POINT('',#292728); +#292728 = CARTESIAN_POINT('',(134.25,-104.887515,1.51)); +#292729 = LINE('',#292730,#292731); +#292730 = CARTESIAN_POINT('',(134.25,-104.887515,1.51)); +#292731 = VECTOR('',#292732,1.); +#292732 = DIRECTION('',(0.,0.,1.)); +#292733 = ORIENTED_EDGE('',*,*,#292734,.F.); +#292734 = EDGE_CURVE('',#292696,#292727,#292735,.T.); +#292735 = LINE('',#292736,#292737); +#292736 = CARTESIAN_POINT('',(134.309725,-104.890449,1.51)); +#292737 = VECTOR('',#292738,1.); +#292738 = DIRECTION('',(-0.998795539066,4.906598763716E-02,0.)); +#292739 = PLANE('',#292740); +#292740 = AXIS2_PLACEMENT_3D('',#292741,#292742,#292743); +#292741 = CARTESIAN_POINT('',(134.309725,-104.890449,1.51)); +#292742 = DIRECTION('',(-4.906598763716E-02,-0.998795539066,0.)); +#292743 = DIRECTION('',(-0.998795539066,4.906598763716E-02,0.)); +#292744 = ADVANCED_FACE('',(#292745),#292770,.T.); +#292745 = FACE_BOUND('',#292746,.T.); +#292746 = EDGE_LOOP('',(#292747,#292748,#292756,#292764)); +#292747 = ORIENTED_EDGE('',*,*,#292726,.T.); +#292748 = ORIENTED_EDGE('',*,*,#292749,.T.); +#292749 = EDGE_CURVE('',#292719,#292750,#292752,.T.); +#292750 = VERTEX_POINT('',#292751); +#292751 = CARTESIAN_POINT('',(134.190274,-104.890449,1.545)); +#292752 = LINE('',#292753,#292754); +#292753 = CARTESIAN_POINT('',(134.25,-104.887515,1.545)); +#292754 = VECTOR('',#292755,1.); +#292755 = DIRECTION('',(-0.998795579325,-4.906516809681E-02,0.)); +#292756 = ORIENTED_EDGE('',*,*,#292757,.F.); +#292757 = EDGE_CURVE('',#292758,#292750,#292760,.T.); +#292758 = VERTEX_POINT('',#292759); +#292759 = CARTESIAN_POINT('',(134.190274,-104.890449,1.51)); +#292760 = LINE('',#292761,#292762); +#292761 = CARTESIAN_POINT('',(134.190274,-104.890449,1.51)); +#292762 = VECTOR('',#292763,1.); +#292763 = DIRECTION('',(0.,0.,1.)); +#292764 = ORIENTED_EDGE('',*,*,#292765,.F.); +#292765 = EDGE_CURVE('',#292727,#292758,#292766,.T.); +#292766 = LINE('',#292767,#292768); +#292767 = CARTESIAN_POINT('',(134.25,-104.887515,1.51)); +#292768 = VECTOR('',#292769,1.); +#292769 = DIRECTION('',(-0.998795579325,-4.906516809681E-02,0.)); +#292770 = PLANE('',#292771); +#292771 = AXIS2_PLACEMENT_3D('',#292772,#292773,#292774); +#292772 = CARTESIAN_POINT('',(134.25,-104.887515,1.51)); +#292773 = DIRECTION('',(4.906516809681E-02,-0.998795579325,0.)); +#292774 = DIRECTION('',(-0.998795579325,-4.906516809681E-02,0.)); +#292775 = ADVANCED_FACE('',(#292776),#292801,.T.); +#292776 = FACE_BOUND('',#292777,.T.); +#292777 = EDGE_LOOP('',(#292778,#292779,#292787,#292795)); +#292778 = ORIENTED_EDGE('',*,*,#292757,.T.); +#292779 = ORIENTED_EDGE('',*,*,#292780,.T.); +#292780 = EDGE_CURVE('',#292750,#292781,#292783,.T.); +#292781 = VERTEX_POINT('',#292782); +#292782 = CARTESIAN_POINT('',(134.151921,-104.898077,1.545)); +#292783 = LINE('',#292784,#292785); +#292784 = CARTESIAN_POINT('',(134.190274,-104.890449,1.545)); +#292785 = VECTOR('',#292786,1.); +#292786 = DIRECTION('',(-0.980789615596,-0.195068526263,0.)); +#292787 = ORIENTED_EDGE('',*,*,#292788,.F.); +#292788 = EDGE_CURVE('',#292789,#292781,#292791,.T.); +#292789 = VERTEX_POINT('',#292790); +#292790 = CARTESIAN_POINT('',(134.151921,-104.898077,1.51)); +#292791 = LINE('',#292792,#292793); +#292792 = CARTESIAN_POINT('',(134.151921,-104.898077,1.51)); +#292793 = VECTOR('',#292794,1.); +#292794 = DIRECTION('',(0.,0.,1.)); +#292795 = ORIENTED_EDGE('',*,*,#292796,.F.); +#292796 = EDGE_CURVE('',#292758,#292789,#292797,.T.); +#292797 = LINE('',#292798,#292799); +#292798 = CARTESIAN_POINT('',(134.190274,-104.890449,1.51)); +#292799 = VECTOR('',#292800,1.); +#292800 = DIRECTION('',(-0.980789615596,-0.195068526263,0.)); +#292801 = PLANE('',#292802); +#292802 = AXIS2_PLACEMENT_3D('',#292803,#292804,#292805); +#292803 = CARTESIAN_POINT('',(134.190274,-104.890449,1.51)); +#292804 = DIRECTION('',(0.195068526263,-0.980789615596,0.)); +#292805 = DIRECTION('',(-0.980789615596,-0.195068526263,0.)); +#292806 = ADVANCED_FACE('',(#292807),#292832,.T.); +#292807 = FACE_BOUND('',#292808,.T.); +#292808 = EDGE_LOOP('',(#292809,#292810,#292818,#292826)); +#292809 = ORIENTED_EDGE('',*,*,#292788,.T.); +#292810 = ORIENTED_EDGE('',*,*,#292811,.T.); +#292811 = EDGE_CURVE('',#292781,#292812,#292814,.T.); +#292812 = VERTEX_POINT('',#292813); +#292813 = CARTESIAN_POINT('',(134.151921,-104.730491,1.545)); +#292814 = LINE('',#292815,#292816); +#292815 = CARTESIAN_POINT('',(134.151921,-104.898077,1.545)); +#292816 = VECTOR('',#292817,1.); +#292817 = DIRECTION('',(0.,1.,0.)); +#292818 = ORIENTED_EDGE('',*,*,#292819,.F.); +#292819 = EDGE_CURVE('',#292820,#292812,#292822,.T.); +#292820 = VERTEX_POINT('',#292821); +#292821 = CARTESIAN_POINT('',(134.151921,-104.730491,1.51)); +#292822 = LINE('',#292823,#292824); +#292823 = CARTESIAN_POINT('',(134.151921,-104.730491,1.51)); +#292824 = VECTOR('',#292825,1.); +#292825 = DIRECTION('',(0.,0.,1.)); +#292826 = ORIENTED_EDGE('',*,*,#292827,.F.); +#292827 = EDGE_CURVE('',#292789,#292820,#292828,.T.); +#292828 = LINE('',#292829,#292830); +#292829 = CARTESIAN_POINT('',(134.151921,-104.898077,1.51)); +#292830 = VECTOR('',#292831,1.); +#292831 = DIRECTION('',(0.,1.,0.)); +#292832 = PLANE('',#292833); +#292833 = AXIS2_PLACEMENT_3D('',#292834,#292835,#292836); +#292834 = CARTESIAN_POINT('',(134.151921,-104.898077,1.51)); +#292835 = DIRECTION('',(-1.,0.,0.)); +#292836 = DIRECTION('',(0.,1.,0.)); +#292837 = ADVANCED_FACE('',(#292838),#292863,.T.); +#292838 = FACE_BOUND('',#292839,.T.); +#292839 = EDGE_LOOP('',(#292840,#292841,#292849,#292857)); +#292840 = ORIENTED_EDGE('',*,*,#292819,.T.); +#292841 = ORIENTED_EDGE('',*,*,#292842,.T.); +#292842 = EDGE_CURVE('',#292812,#292843,#292845,.T.); +#292843 = VERTEX_POINT('',#292844); +#292844 = CARTESIAN_POINT('',(134.166853,-104.694443,1.545)); +#292845 = LINE('',#292846,#292847); +#292846 = CARTESIAN_POINT('',(134.151921,-104.730491,1.545)); +#292847 = VECTOR('',#292848,1.); +#292848 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#292849 = ORIENTED_EDGE('',*,*,#292850,.F.); +#292850 = EDGE_CURVE('',#292851,#292843,#292853,.T.); +#292851 = VERTEX_POINT('',#292852); +#292852 = CARTESIAN_POINT('',(134.166853,-104.694443,1.51)); +#292853 = LINE('',#292854,#292855); +#292854 = CARTESIAN_POINT('',(134.166853,-104.694443,1.51)); +#292855 = VECTOR('',#292856,1.); +#292856 = DIRECTION('',(0.,0.,1.)); +#292857 = ORIENTED_EDGE('',*,*,#292858,.F.); +#292858 = EDGE_CURVE('',#292820,#292851,#292859,.T.); +#292859 = LINE('',#292860,#292861); +#292860 = CARTESIAN_POINT('',(134.151921,-104.730491,1.51)); +#292861 = VECTOR('',#292862,1.); +#292862 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#292863 = PLANE('',#292864); +#292864 = AXIS2_PLACEMENT_3D('',#292865,#292866,#292867); +#292865 = CARTESIAN_POINT('',(134.151921,-104.730491,1.51)); +#292866 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#292867 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#292868 = ADVANCED_FACE('',(#292869),#292894,.T.); +#292869 = FACE_BOUND('',#292870,.T.); +#292870 = EDGE_LOOP('',(#292871,#292872,#292880,#292888)); +#292871 = ORIENTED_EDGE('',*,*,#292850,.T.); +#292872 = ORIENTED_EDGE('',*,*,#292873,.T.); +#292873 = EDGE_CURVE('',#292843,#292874,#292876,.T.); +#292874 = VERTEX_POINT('',#292875); +#292875 = CARTESIAN_POINT('',(134.730499,-104.128078,1.545)); +#292876 = LINE('',#292877,#292878); +#292877 = CARTESIAN_POINT('',(134.166853,-104.694443,1.545)); +#292878 = VECTOR('',#292879,1.); +#292879 = DIRECTION('',(0.705403319147,0.708806149336,0.)); +#292880 = ORIENTED_EDGE('',*,*,#292881,.F.); +#292881 = EDGE_CURVE('',#292882,#292874,#292884,.T.); +#292882 = VERTEX_POINT('',#292883); +#292883 = CARTESIAN_POINT('',(134.730499,-104.128078,1.51)); +#292884 = LINE('',#292885,#292886); +#292885 = CARTESIAN_POINT('',(134.730499,-104.128078,1.51)); +#292886 = VECTOR('',#292887,1.); +#292887 = DIRECTION('',(0.,0.,1.)); +#292888 = ORIENTED_EDGE('',*,*,#292889,.F.); +#292889 = EDGE_CURVE('',#292851,#292882,#292890,.T.); +#292890 = LINE('',#292891,#292892); +#292891 = CARTESIAN_POINT('',(134.166853,-104.694443,1.51)); +#292892 = VECTOR('',#292893,1.); +#292893 = DIRECTION('',(0.705403319147,0.708806149336,0.)); +#292894 = PLANE('',#292895); +#292895 = AXIS2_PLACEMENT_3D('',#292896,#292897,#292898); +#292896 = CARTESIAN_POINT('',(134.166853,-104.694443,1.51)); +#292897 = DIRECTION('',(-0.708806149336,0.705403319147,0.)); +#292898 = DIRECTION('',(0.705403319147,0.708806149336,0.)); +#292899 = ADVANCED_FACE('',(#292900),#292925,.T.); +#292900 = FACE_BOUND('',#292901,.T.); +#292901 = EDGE_LOOP('',(#292902,#292903,#292911,#292919)); +#292902 = ORIENTED_EDGE('',*,*,#292881,.T.); +#292903 = ORIENTED_EDGE('',*,*,#292904,.T.); +#292904 = EDGE_CURVE('',#292874,#292905,#292907,.T.); +#292905 = VERTEX_POINT('',#292906); +#292906 = CARTESIAN_POINT('',(134.722836,-104.114805,1.545)); +#292907 = LINE('',#292908,#292909); +#292908 = CARTESIAN_POINT('',(134.730499,-104.128078,1.545)); +#292909 = VECTOR('',#292910,1.); +#292910 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#292911 = ORIENTED_EDGE('',*,*,#292912,.F.); +#292912 = EDGE_CURVE('',#292913,#292905,#292915,.T.); +#292913 = VERTEX_POINT('',#292914); +#292914 = CARTESIAN_POINT('',(134.722836,-104.114805,1.51)); +#292915 = LINE('',#292916,#292917); +#292916 = CARTESIAN_POINT('',(134.722836,-104.114805,1.51)); +#292917 = VECTOR('',#292918,1.); +#292918 = DIRECTION('',(0.,0.,1.)); +#292919 = ORIENTED_EDGE('',*,*,#292920,.F.); +#292920 = EDGE_CURVE('',#292882,#292913,#292921,.T.); +#292921 = LINE('',#292922,#292923); +#292922 = CARTESIAN_POINT('',(134.730499,-104.128078,1.51)); +#292923 = VECTOR('',#292924,1.); +#292924 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#292925 = PLANE('',#292926); +#292926 = AXIS2_PLACEMENT_3D('',#292927,#292928,#292929); +#292927 = CARTESIAN_POINT('',(134.730499,-104.128078,1.51)); +#292928 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#292929 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#292930 = ADVANCED_FACE('',(#292931),#292958,.T.); +#292931 = FACE_BOUND('',#292932,.T.); +#292932 = EDGE_LOOP('',(#292933,#292934,#292943,#292951)); +#292933 = ORIENTED_EDGE('',*,*,#292912,.T.); +#292934 = ORIENTED_EDGE('',*,*,#292935,.T.); +#292935 = EDGE_CURVE('',#292905,#292936,#292938,.T.); +#292936 = VERTEX_POINT('',#292937); +#292937 = CARTESIAN_POINT('',(134.885195,-104.277164,1.545)); +#292938 = CIRCLE('',#292939,0.300000118202); +#292939 = AXIS2_PLACEMENT_3D('',#292940,#292941,#292942); +#292940 = CARTESIAN_POINT('',(135.,-104.,1.545)); +#292941 = DIRECTION('',(0.,0.,-1.)); +#292942 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#292943 = ORIENTED_EDGE('',*,*,#292944,.F.); +#292944 = EDGE_CURVE('',#292945,#292936,#292947,.T.); +#292945 = VERTEX_POINT('',#292946); +#292946 = CARTESIAN_POINT('',(134.885195,-104.277164,1.51)); +#292947 = LINE('',#292948,#292949); +#292948 = CARTESIAN_POINT('',(134.885195,-104.277164,1.51)); +#292949 = VECTOR('',#292950,1.); +#292950 = DIRECTION('',(0.,0.,1.)); +#292951 = ORIENTED_EDGE('',*,*,#292952,.F.); +#292952 = EDGE_CURVE('',#292913,#292945,#292953,.T.); +#292953 = CIRCLE('',#292954,0.300000118202); +#292954 = AXIS2_PLACEMENT_3D('',#292955,#292956,#292957); +#292955 = CARTESIAN_POINT('',(135.,-104.,1.51)); +#292956 = DIRECTION('',(0.,0.,-1.)); +#292957 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#292958 = CYLINDRICAL_SURFACE('',#292959,0.300000118202); +#292959 = AXIS2_PLACEMENT_3D('',#292960,#292961,#292962); +#292960 = CARTESIAN_POINT('',(135.,-104.,1.51)); +#292961 = DIRECTION('',(0.,0.,-1.)); +#292962 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#292963 = ADVANCED_FACE('',(#292964),#292980,.T.); +#292964 = FACE_BOUND('',#292965,.T.); +#292965 = EDGE_LOOP('',(#292966,#292967,#292973,#292974)); +#292966 = ORIENTED_EDGE('',*,*,#292944,.T.); +#292967 = ORIENTED_EDGE('',*,*,#292968,.T.); +#292968 = EDGE_CURVE('',#292936,#292618,#292969,.T.); +#292969 = LINE('',#292970,#292971); +#292970 = CARTESIAN_POINT('',(134.885195,-104.277164,1.545)); +#292971 = VECTOR('',#292972,1.); +#292972 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#292973 = ORIENTED_EDGE('',*,*,#292615,.F.); +#292974 = ORIENTED_EDGE('',*,*,#292975,.F.); +#292975 = EDGE_CURVE('',#292945,#292616,#292976,.T.); +#292976 = LINE('',#292977,#292978); +#292977 = CARTESIAN_POINT('',(134.885195,-104.277164,1.51)); +#292978 = VECTOR('',#292979,1.); +#292979 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#292980 = PLANE('',#292981); +#292981 = AXIS2_PLACEMENT_3D('',#292982,#292983,#292984); +#292982 = CARTESIAN_POINT('',(134.885195,-104.277164,1.51)); +#292983 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#292984 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#292985 = ADVANCED_FACE('',(#292986),#293013,.F.); +#292986 = FACE_BOUND('',#292987,.T.); +#292987 = EDGE_LOOP('',(#292988,#292998,#293005,#293006)); +#292988 = ORIENTED_EDGE('',*,*,#292989,.T.); +#292989 = EDGE_CURVE('',#292990,#292992,#292994,.T.); +#292990 = VERTEX_POINT('',#292991); +#292991 = CARTESIAN_POINT('',(135.137255,-104.,1.51)); +#292992 = VERTEX_POINT('',#292993); +#292993 = CARTESIAN_POINT('',(135.137255,-104.,1.545)); +#292994 = LINE('',#292995,#292996); +#292995 = CARTESIAN_POINT('',(135.137255,-104.,1.51)); +#292996 = VECTOR('',#292997,1.); +#292997 = DIRECTION('',(0.,0.,1.)); +#292998 = ORIENTED_EDGE('',*,*,#292999,.T.); +#292999 = EDGE_CURVE('',#292992,#292992,#293000,.T.); +#293000 = CIRCLE('',#293001,0.137255); +#293001 = AXIS2_PLACEMENT_3D('',#293002,#293003,#293004); +#293002 = CARTESIAN_POINT('',(135.,-104.,1.545)); +#293003 = DIRECTION('',(0.,0.,1.)); +#293004 = DIRECTION('',(1.,0.,-0.)); +#293005 = ORIENTED_EDGE('',*,*,#292989,.F.); +#293006 = ORIENTED_EDGE('',*,*,#293007,.F.); +#293007 = EDGE_CURVE('',#292990,#292990,#293008,.T.); +#293008 = CIRCLE('',#293009,0.137255); +#293009 = AXIS2_PLACEMENT_3D('',#293010,#293011,#293012); +#293010 = CARTESIAN_POINT('',(135.,-104.,1.51)); +#293011 = DIRECTION('',(0.,0.,1.)); +#293012 = DIRECTION('',(1.,0.,-0.)); +#293013 = CYLINDRICAL_SURFACE('',#293014,0.137255); +#293014 = AXIS2_PLACEMENT_3D('',#293015,#293016,#293017); +#293015 = CARTESIAN_POINT('',(135.,-104.,1.51)); +#293016 = DIRECTION('',(-0.,-0.,-1.)); +#293017 = DIRECTION('',(1.,0.,-0.)); +#293018 = ADVANCED_FACE('',(#293019,#293033),#293036,.F.); +#293019 = FACE_BOUND('',#293020,.T.); +#293020 = EDGE_LOOP('',(#293021,#293022,#293023,#293024,#293025,#293026, + #293027,#293028,#293029,#293030,#293031,#293032)); +#293021 = ORIENTED_EDGE('',*,*,#292641,.T.); +#293022 = ORIENTED_EDGE('',*,*,#292672,.T.); +#293023 = ORIENTED_EDGE('',*,*,#292703,.T.); +#293024 = ORIENTED_EDGE('',*,*,#292734,.T.); +#293025 = ORIENTED_EDGE('',*,*,#292765,.T.); +#293026 = ORIENTED_EDGE('',*,*,#292796,.T.); +#293027 = ORIENTED_EDGE('',*,*,#292827,.T.); +#293028 = ORIENTED_EDGE('',*,*,#292858,.T.); +#293029 = ORIENTED_EDGE('',*,*,#292889,.T.); +#293030 = ORIENTED_EDGE('',*,*,#292920,.T.); +#293031 = ORIENTED_EDGE('',*,*,#292952,.T.); +#293032 = ORIENTED_EDGE('',*,*,#292975,.T.); +#293033 = FACE_BOUND('',#293034,.T.); +#293034 = EDGE_LOOP('',(#293035)); +#293035 = ORIENTED_EDGE('',*,*,#293007,.T.); +#293036 = PLANE('',#293037); +#293037 = AXIS2_PLACEMENT_3D('',#293038,#293039,#293040); +#293038 = CARTESIAN_POINT('',(0.,0.,1.51)); +#293039 = DIRECTION('',(0.,0.,1.)); +#293040 = DIRECTION('',(1.,0.,-0.)); +#293041 = ADVANCED_FACE('',(#293042,#293056),#293059,.T.); +#293042 = FACE_BOUND('',#293043,.F.); +#293043 = EDGE_LOOP('',(#293044,#293045,#293046,#293047,#293048,#293049, + #293050,#293051,#293052,#293053,#293054,#293055)); +#293044 = ORIENTED_EDGE('',*,*,#292625,.T.); +#293045 = ORIENTED_EDGE('',*,*,#292656,.T.); +#293046 = ORIENTED_EDGE('',*,*,#292687,.T.); +#293047 = ORIENTED_EDGE('',*,*,#292718,.T.); +#293048 = ORIENTED_EDGE('',*,*,#292749,.T.); +#293049 = ORIENTED_EDGE('',*,*,#292780,.T.); +#293050 = ORIENTED_EDGE('',*,*,#292811,.T.); +#293051 = ORIENTED_EDGE('',*,*,#292842,.T.); +#293052 = ORIENTED_EDGE('',*,*,#292873,.T.); +#293053 = ORIENTED_EDGE('',*,*,#292904,.T.); +#293054 = ORIENTED_EDGE('',*,*,#292935,.T.); +#293055 = ORIENTED_EDGE('',*,*,#292968,.T.); +#293056 = FACE_BOUND('',#293057,.F.); +#293057 = EDGE_LOOP('',(#293058)); +#293058 = ORIENTED_EDGE('',*,*,#292999,.T.); +#293059 = PLANE('',#293060); +#293060 = AXIS2_PLACEMENT_3D('',#293061,#293062,#293063); +#293061 = CARTESIAN_POINT('',(0.,0.,1.545)); +#293062 = DIRECTION('',(0.,0.,1.)); +#293063 = DIRECTION('',(1.,0.,-0.)); +#293064 = MANIFOLD_SOLID_BREP('',#293065); +#293065 = CLOSED_SHELL('',(#293066,#293106,#293139,#293170,#293201, + #293234,#293256,#293289,#293306)); +#293066 = ADVANCED_FACE('',(#293067),#293101,.T.); +#293067 = FACE_BOUND('',#293068,.T.); +#293068 = EDGE_LOOP('',(#293069,#293079,#293087,#293095)); +#293069 = ORIENTED_EDGE('',*,*,#293070,.T.); +#293070 = EDGE_CURVE('',#293071,#293073,#293075,.T.); +#293071 = VERTEX_POINT('',#293072); +#293072 = CARTESIAN_POINT('',(124.228722,-100.625,1.51)); +#293073 = VERTEX_POINT('',#293074); +#293074 = CARTESIAN_POINT('',(124.228722,-100.625,1.545)); +#293075 = LINE('',#293076,#293077); +#293076 = CARTESIAN_POINT('',(124.228722,-100.625,1.51)); +#293077 = VECTOR('',#293078,1.); +#293078 = DIRECTION('',(0.,0.,1.)); +#293079 = ORIENTED_EDGE('',*,*,#293080,.T.); +#293080 = EDGE_CURVE('',#293073,#293081,#293083,.T.); +#293081 = VERTEX_POINT('',#293082); +#293082 = CARTESIAN_POINT('',(122.630491,-100.623079,1.545)); +#293083 = LINE('',#293084,#293085); +#293084 = CARTESIAN_POINT('',(124.228722,-100.625,1.545)); +#293085 = VECTOR('',#293086,1.); +#293086 = DIRECTION('',(-0.999999277654,1.201953042063E-03,0.)); +#293087 = ORIENTED_EDGE('',*,*,#293088,.F.); +#293088 = EDGE_CURVE('',#293089,#293081,#293091,.T.); +#293089 = VERTEX_POINT('',#293090); +#293090 = CARTESIAN_POINT('',(122.630491,-100.623079,1.51)); +#293091 = LINE('',#293092,#293093); +#293092 = CARTESIAN_POINT('',(122.630491,-100.623079,1.51)); +#293093 = VECTOR('',#293094,1.); +#293094 = DIRECTION('',(0.,0.,1.)); +#293095 = ORIENTED_EDGE('',*,*,#293096,.F.); +#293096 = EDGE_CURVE('',#293071,#293089,#293097,.T.); +#293097 = LINE('',#293098,#293099); +#293098 = CARTESIAN_POINT('',(124.228722,-100.625,1.51)); +#293099 = VECTOR('',#293100,1.); +#293100 = DIRECTION('',(-0.999999277654,1.201953042063E-03,0.)); +#293101 = PLANE('',#293102); +#293102 = AXIS2_PLACEMENT_3D('',#293103,#293104,#293105); +#293103 = CARTESIAN_POINT('',(124.228722,-100.625,1.51)); +#293104 = DIRECTION('',(-1.201953042063E-03,-0.999999277654,0.)); +#293105 = DIRECTION('',(-0.999999277654,1.201953042063E-03,0.)); +#293106 = ADVANCED_FACE('',(#293107),#293134,.T.); +#293107 = FACE_BOUND('',#293108,.T.); +#293108 = EDGE_LOOP('',(#293109,#293110,#293119,#293127)); +#293109 = ORIENTED_EDGE('',*,*,#293088,.T.); +#293110 = ORIENTED_EDGE('',*,*,#293111,.T.); +#293111 = EDGE_CURVE('',#293081,#293112,#293114,.T.); +#293112 = VERTEX_POINT('',#293113); +#293113 = CARTESIAN_POINT('',(122.630491,-100.426921,1.545)); +#293114 = CIRCLE('',#293115,0.100000456609); +#293115 = AXIS2_PLACEMENT_3D('',#293116,#293117,#293118); +#293116 = CARTESIAN_POINT('',(122.65,-100.525,1.545)); +#293117 = DIRECTION('',(0.,0.,-1.)); +#293118 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#293119 = ORIENTED_EDGE('',*,*,#293120,.F.); +#293120 = EDGE_CURVE('',#293121,#293112,#293123,.T.); +#293121 = VERTEX_POINT('',#293122); +#293122 = CARTESIAN_POINT('',(122.630491,-100.426921,1.51)); +#293123 = LINE('',#293124,#293125); +#293124 = CARTESIAN_POINT('',(122.630491,-100.426921,1.51)); +#293125 = VECTOR('',#293126,1.); +#293126 = DIRECTION('',(0.,0.,1.)); +#293127 = ORIENTED_EDGE('',*,*,#293128,.F.); +#293128 = EDGE_CURVE('',#293089,#293121,#293129,.T.); +#293129 = CIRCLE('',#293130,0.100000456609); +#293130 = AXIS2_PLACEMENT_3D('',#293131,#293132,#293133); +#293131 = CARTESIAN_POINT('',(122.65,-100.525,1.51)); +#293132 = DIRECTION('',(0.,0.,-1.)); +#293133 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#293134 = CYLINDRICAL_SURFACE('',#293135,0.100000456609); +#293135 = AXIS2_PLACEMENT_3D('',#293136,#293137,#293138); +#293136 = CARTESIAN_POINT('',(122.65,-100.525,1.51)); +#293137 = DIRECTION('',(0.,0.,-1.)); +#293138 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#293139 = ADVANCED_FACE('',(#293140),#293165,.T.); +#293140 = FACE_BOUND('',#293141,.T.); +#293141 = EDGE_LOOP('',(#293142,#293143,#293151,#293159)); +#293142 = ORIENTED_EDGE('',*,*,#293120,.T.); +#293143 = ORIENTED_EDGE('',*,*,#293144,.T.); +#293144 = EDGE_CURVE('',#293112,#293145,#293147,.T.); +#293145 = VERTEX_POINT('',#293146); +#293146 = CARTESIAN_POINT('',(124.212171,-100.425,1.545)); +#293147 = LINE('',#293148,#293149); +#293148 = CARTESIAN_POINT('',(122.630491,-100.426921,1.545)); +#293149 = VECTOR('',#293150,1.); +#293150 = DIRECTION('',(0.999999262458,1.21453048858E-03,0.)); +#293151 = ORIENTED_EDGE('',*,*,#293152,.F.); +#293152 = EDGE_CURVE('',#293153,#293145,#293155,.T.); +#293153 = VERTEX_POINT('',#293154); +#293154 = CARTESIAN_POINT('',(124.212171,-100.425,1.51)); +#293155 = LINE('',#293156,#293157); +#293156 = CARTESIAN_POINT('',(124.212171,-100.425,1.51)); +#293157 = VECTOR('',#293158,1.); +#293158 = DIRECTION('',(0.,0.,1.)); +#293159 = ORIENTED_EDGE('',*,*,#293160,.F.); +#293160 = EDGE_CURVE('',#293121,#293153,#293161,.T.); +#293161 = LINE('',#293162,#293163); +#293162 = CARTESIAN_POINT('',(122.630491,-100.426921,1.51)); +#293163 = VECTOR('',#293164,1.); +#293164 = DIRECTION('',(0.999999262458,1.21453048858E-03,0.)); +#293165 = PLANE('',#293166); +#293166 = AXIS2_PLACEMENT_3D('',#293167,#293168,#293169); +#293167 = CARTESIAN_POINT('',(122.630491,-100.426921,1.51)); +#293168 = DIRECTION('',(-1.21453048858E-03,0.999999262458,0.)); +#293169 = DIRECTION('',(0.999999262458,1.21453048858E-03,0.)); +#293170 = ADVANCED_FACE('',(#293171),#293196,.T.); +#293171 = FACE_BOUND('',#293172,.T.); +#293172 = EDGE_LOOP('',(#293173,#293174,#293182,#293190)); +#293173 = ORIENTED_EDGE('',*,*,#293152,.T.); +#293174 = ORIENTED_EDGE('',*,*,#293175,.T.); +#293175 = EDGE_CURVE('',#293145,#293176,#293178,.T.); +#293176 = VERTEX_POINT('',#293177); +#293177 = CARTESIAN_POINT('',(124.222836,-100.385195,1.545)); +#293178 = LINE('',#293179,#293180); +#293179 = CARTESIAN_POINT('',(124.212171,-100.425,1.545)); +#293180 = VECTOR('',#293181,1.); +#293181 = DIRECTION('',(0.258802797775,0.965930179601,0.)); +#293182 = ORIENTED_EDGE('',*,*,#293183,.F.); +#293183 = EDGE_CURVE('',#293184,#293176,#293186,.T.); +#293184 = VERTEX_POINT('',#293185); +#293185 = CARTESIAN_POINT('',(124.222836,-100.385195,1.51)); +#293186 = LINE('',#293187,#293188); +#293187 = CARTESIAN_POINT('',(124.222836,-100.385195,1.51)); +#293188 = VECTOR('',#293189,1.); +#293189 = DIRECTION('',(0.,0.,1.)); +#293190 = ORIENTED_EDGE('',*,*,#293191,.F.); +#293191 = EDGE_CURVE('',#293153,#293184,#293192,.T.); +#293192 = LINE('',#293193,#293194); +#293193 = CARTESIAN_POINT('',(124.212171,-100.425,1.51)); +#293194 = VECTOR('',#293195,1.); +#293195 = DIRECTION('',(0.258802797775,0.965930179601,0.)); +#293196 = PLANE('',#293197); +#293197 = AXIS2_PLACEMENT_3D('',#293198,#293199,#293200); +#293198 = CARTESIAN_POINT('',(124.212171,-100.425,1.51)); +#293199 = DIRECTION('',(-0.965930179601,0.258802797775,0.)); +#293200 = DIRECTION('',(0.258802797775,0.965930179601,0.)); +#293201 = ADVANCED_FACE('',(#293202),#293229,.T.); +#293202 = FACE_BOUND('',#293203,.T.); +#293203 = EDGE_LOOP('',(#293204,#293205,#293214,#293222)); +#293204 = ORIENTED_EDGE('',*,*,#293183,.T.); +#293205 = ORIENTED_EDGE('',*,*,#293206,.T.); +#293206 = EDGE_CURVE('',#293176,#293207,#293209,.T.); +#293207 = VERTEX_POINT('',#293208); +#293208 = CARTESIAN_POINT('',(124.261994,-100.682628,1.545)); +#293209 = CIRCLE('',#293210,0.299997422619); +#293210 = AXIS2_PLACEMENT_3D('',#293211,#293212,#293213); +#293211 = CARTESIAN_POINT('',(124.49999708232,-100.5,1.545)); +#293212 = DIRECTION('',(0.,0.,-1.)); +#293213 = DIRECTION('',(-0.923878211689,0.382686621098,0.)); +#293214 = ORIENTED_EDGE('',*,*,#293215,.F.); +#293215 = EDGE_CURVE('',#293216,#293207,#293218,.T.); +#293216 = VERTEX_POINT('',#293217); +#293217 = CARTESIAN_POINT('',(124.261994,-100.682628,1.51)); +#293218 = LINE('',#293219,#293220); +#293219 = CARTESIAN_POINT('',(124.261994,-100.682628,1.51)); +#293220 = VECTOR('',#293221,1.); +#293221 = DIRECTION('',(0.,0.,1.)); +#293222 = ORIENTED_EDGE('',*,*,#293223,.F.); +#293223 = EDGE_CURVE('',#293184,#293216,#293224,.T.); +#293224 = CIRCLE('',#293225,0.299997422619); +#293225 = AXIS2_PLACEMENT_3D('',#293226,#293227,#293228); +#293226 = CARTESIAN_POINT('',(124.49999708232,-100.5,1.51)); +#293227 = DIRECTION('',(0.,0.,-1.)); +#293228 = DIRECTION('',(-0.923878211689,0.382686621098,0.)); +#293229 = CYLINDRICAL_SURFACE('',#293230,0.299997422619); +#293230 = AXIS2_PLACEMENT_3D('',#293231,#293232,#293233); +#293231 = CARTESIAN_POINT('',(124.49999708232,-100.5,1.51)); +#293232 = DIRECTION('',(0.,0.,-1.)); +#293233 = DIRECTION('',(-0.923878211689,0.382686621098,0.)); +#293234 = ADVANCED_FACE('',(#293235),#293251,.T.); +#293235 = FACE_BOUND('',#293236,.T.); +#293236 = EDGE_LOOP('',(#293237,#293238,#293244,#293245)); +#293237 = ORIENTED_EDGE('',*,*,#293215,.T.); +#293238 = ORIENTED_EDGE('',*,*,#293239,.T.); +#293239 = EDGE_CURVE('',#293207,#293073,#293240,.T.); +#293240 = LINE('',#293241,#293242); +#293241 = CARTESIAN_POINT('',(124.261994,-100.682628,1.545)); +#293242 = VECTOR('',#293243,1.); +#293243 = DIRECTION('',(-0.500005169787,0.866022418986,0.)); +#293244 = ORIENTED_EDGE('',*,*,#293070,.F.); +#293245 = ORIENTED_EDGE('',*,*,#293246,.F.); +#293246 = EDGE_CURVE('',#293216,#293071,#293247,.T.); +#293247 = LINE('',#293248,#293249); +#293248 = CARTESIAN_POINT('',(124.261994,-100.682628,1.51)); +#293249 = VECTOR('',#293250,1.); +#293250 = DIRECTION('',(-0.500005169787,0.866022418986,0.)); +#293251 = PLANE('',#293252); +#293252 = AXIS2_PLACEMENT_3D('',#293253,#293254,#293255); +#293253 = CARTESIAN_POINT('',(124.261994,-100.682628,1.51)); +#293254 = DIRECTION('',(-0.866022418986,-0.500005169787,0.)); +#293255 = DIRECTION('',(-0.500005169787,0.866022418986,0.)); +#293256 = ADVANCED_FACE('',(#293257),#293284,.F.); +#293257 = FACE_BOUND('',#293258,.T.); +#293258 = EDGE_LOOP('',(#293259,#293269,#293276,#293277)); +#293259 = ORIENTED_EDGE('',*,*,#293260,.T.); +#293260 = EDGE_CURVE('',#293261,#293263,#293265,.T.); +#293261 = VERTEX_POINT('',#293262); +#293262 = CARTESIAN_POINT('',(124.637255,-100.5,1.51)); +#293263 = VERTEX_POINT('',#293264); +#293264 = CARTESIAN_POINT('',(124.637255,-100.5,1.545)); +#293265 = LINE('',#293266,#293267); +#293266 = CARTESIAN_POINT('',(124.637255,-100.5,1.51)); +#293267 = VECTOR('',#293268,1.); +#293268 = DIRECTION('',(0.,0.,1.)); +#293269 = ORIENTED_EDGE('',*,*,#293270,.T.); +#293270 = EDGE_CURVE('',#293263,#293263,#293271,.T.); +#293271 = CIRCLE('',#293272,0.137255); +#293272 = AXIS2_PLACEMENT_3D('',#293273,#293274,#293275); +#293273 = CARTESIAN_POINT('',(124.5,-100.5,1.545)); +#293274 = DIRECTION('',(0.,0.,1.)); +#293275 = DIRECTION('',(1.,0.,-0.)); +#293276 = ORIENTED_EDGE('',*,*,#293260,.F.); +#293277 = ORIENTED_EDGE('',*,*,#293278,.F.); +#293278 = EDGE_CURVE('',#293261,#293261,#293279,.T.); +#293279 = CIRCLE('',#293280,0.137255); +#293280 = AXIS2_PLACEMENT_3D('',#293281,#293282,#293283); +#293281 = CARTESIAN_POINT('',(124.5,-100.5,1.51)); +#293282 = DIRECTION('',(0.,0.,1.)); +#293283 = DIRECTION('',(1.,0.,-0.)); +#293284 = CYLINDRICAL_SURFACE('',#293285,0.137255); +#293285 = AXIS2_PLACEMENT_3D('',#293286,#293287,#293288); +#293286 = CARTESIAN_POINT('',(124.5,-100.5,1.51)); +#293287 = DIRECTION('',(-0.,-0.,-1.)); +#293288 = DIRECTION('',(1.,0.,-0.)); +#293289 = ADVANCED_FACE('',(#293290,#293298),#293301,.F.); +#293290 = FACE_BOUND('',#293291,.T.); +#293291 = EDGE_LOOP('',(#293292,#293293,#293294,#293295,#293296,#293297) + ); +#293292 = ORIENTED_EDGE('',*,*,#293096,.T.); +#293293 = ORIENTED_EDGE('',*,*,#293128,.T.); +#293294 = ORIENTED_EDGE('',*,*,#293160,.T.); +#293295 = ORIENTED_EDGE('',*,*,#293191,.T.); +#293296 = ORIENTED_EDGE('',*,*,#293223,.T.); +#293297 = ORIENTED_EDGE('',*,*,#293246,.T.); +#293298 = FACE_BOUND('',#293299,.T.); +#293299 = EDGE_LOOP('',(#293300)); +#293300 = ORIENTED_EDGE('',*,*,#293278,.T.); +#293301 = PLANE('',#293302); +#293302 = AXIS2_PLACEMENT_3D('',#293303,#293304,#293305); +#293303 = CARTESIAN_POINT('',(0.,0.,1.51)); +#293304 = DIRECTION('',(0.,0.,1.)); +#293305 = DIRECTION('',(1.,0.,-0.)); +#293306 = ADVANCED_FACE('',(#293307,#293315),#293318,.T.); +#293307 = FACE_BOUND('',#293308,.F.); +#293308 = EDGE_LOOP('',(#293309,#293310,#293311,#293312,#293313,#293314) + ); +#293309 = ORIENTED_EDGE('',*,*,#293080,.T.); +#293310 = ORIENTED_EDGE('',*,*,#293111,.T.); +#293311 = ORIENTED_EDGE('',*,*,#293144,.T.); +#293312 = ORIENTED_EDGE('',*,*,#293175,.T.); +#293313 = ORIENTED_EDGE('',*,*,#293206,.T.); +#293314 = ORIENTED_EDGE('',*,*,#293239,.T.); +#293315 = FACE_BOUND('',#293316,.F.); +#293316 = EDGE_LOOP('',(#293317)); +#293317 = ORIENTED_EDGE('',*,*,#293270,.T.); +#293318 = PLANE('',#293319); +#293319 = AXIS2_PLACEMENT_3D('',#293320,#293321,#293322); +#293320 = CARTESIAN_POINT('',(0.,0.,1.545)); +#293321 = DIRECTION('',(0.,0.,1.)); +#293322 = DIRECTION('',(1.,0.,-0.)); +#293323 = MANIFOLD_SOLID_BREP('',#293324); +#293324 = CLOSED_SHELL('',(#293325,#293365,#293398,#293429,#293460, + #293493,#293515,#293548,#293565)); +#293325 = ADVANCED_FACE('',(#293326),#293360,.T.); +#293326 = FACE_BOUND('',#293327,.T.); +#293327 = EDGE_LOOP('',(#293328,#293338,#293346,#293354)); +#293328 = ORIENTED_EDGE('',*,*,#293329,.T.); +#293329 = EDGE_CURVE('',#293330,#293332,#293334,.T.); +#293330 = VERTEX_POINT('',#293331); +#293331 = CARTESIAN_POINT('',(150.787829,-100.425,1.51)); +#293332 = VERTEX_POINT('',#293333); +#293333 = CARTESIAN_POINT('',(150.787829,-100.425,1.545)); +#293334 = LINE('',#293335,#293336); +#293335 = CARTESIAN_POINT('',(150.787829,-100.425,1.51)); +#293336 = VECTOR('',#293337,1.); +#293337 = DIRECTION('',(0.,0.,1.)); +#293338 = ORIENTED_EDGE('',*,*,#293339,.T.); +#293339 = EDGE_CURVE('',#293332,#293340,#293342,.T.); +#293340 = VERTEX_POINT('',#293341); +#293341 = CARTESIAN_POINT('',(152.319509,-100.426921,1.545)); +#293342 = LINE('',#293343,#293344); +#293343 = CARTESIAN_POINT('',(150.787829,-100.425,1.545)); +#293344 = VECTOR('',#293345,1.); +#293345 = DIRECTION('',(0.999999213519,-1.254177432079E-03,0.)); +#293346 = ORIENTED_EDGE('',*,*,#293347,.F.); +#293347 = EDGE_CURVE('',#293348,#293340,#293350,.T.); +#293348 = VERTEX_POINT('',#293349); +#293349 = CARTESIAN_POINT('',(152.319509,-100.426921,1.51)); +#293350 = LINE('',#293351,#293352); +#293351 = CARTESIAN_POINT('',(152.319509,-100.426921,1.51)); +#293352 = VECTOR('',#293353,1.); +#293353 = DIRECTION('',(0.,0.,1.)); +#293354 = ORIENTED_EDGE('',*,*,#293355,.F.); +#293355 = EDGE_CURVE('',#293330,#293348,#293356,.T.); +#293356 = LINE('',#293357,#293358); +#293357 = CARTESIAN_POINT('',(150.787829,-100.425,1.51)); +#293358 = VECTOR('',#293359,1.); +#293359 = DIRECTION('',(0.999999213519,-1.254177432079E-03,0.)); +#293360 = PLANE('',#293361); +#293361 = AXIS2_PLACEMENT_3D('',#293362,#293363,#293364); +#293362 = CARTESIAN_POINT('',(150.787829,-100.425,1.51)); +#293363 = DIRECTION('',(1.254177432079E-03,0.999999213519,-0.)); +#293364 = DIRECTION('',(0.999999213519,-1.254177432079E-03,0.)); +#293365 = ADVANCED_FACE('',(#293366),#293393,.T.); +#293366 = FACE_BOUND('',#293367,.T.); +#293367 = EDGE_LOOP('',(#293368,#293369,#293378,#293386)); +#293368 = ORIENTED_EDGE('',*,*,#293347,.T.); +#293369 = ORIENTED_EDGE('',*,*,#293370,.T.); +#293370 = EDGE_CURVE('',#293340,#293371,#293373,.T.); +#293371 = VERTEX_POINT('',#293372); +#293372 = CARTESIAN_POINT('',(152.319509,-100.623079,1.545)); +#293373 = CIRCLE('',#293374,0.100000456609); +#293374 = AXIS2_PLACEMENT_3D('',#293375,#293376,#293377); +#293375 = CARTESIAN_POINT('',(152.3,-100.525,1.545)); +#293376 = DIRECTION('',(0.,0.,-1.)); +#293377 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#293378 = ORIENTED_EDGE('',*,*,#293379,.F.); +#293379 = EDGE_CURVE('',#293380,#293371,#293382,.T.); +#293380 = VERTEX_POINT('',#293381); +#293381 = CARTESIAN_POINT('',(152.319509,-100.623079,1.51)); +#293382 = LINE('',#293383,#293384); +#293383 = CARTESIAN_POINT('',(152.319509,-100.623079,1.51)); +#293384 = VECTOR('',#293385,1.); +#293385 = DIRECTION('',(0.,0.,1.)); +#293386 = ORIENTED_EDGE('',*,*,#293387,.F.); +#293387 = EDGE_CURVE('',#293348,#293380,#293388,.T.); +#293388 = CIRCLE('',#293389,0.100000456609); +#293389 = AXIS2_PLACEMENT_3D('',#293390,#293391,#293392); +#293390 = CARTESIAN_POINT('',(152.3,-100.525,1.51)); +#293391 = DIRECTION('',(0.,0.,-1.)); +#293392 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#293393 = CYLINDRICAL_SURFACE('',#293394,0.100000456609); +#293394 = AXIS2_PLACEMENT_3D('',#293395,#293396,#293397); +#293395 = CARTESIAN_POINT('',(152.3,-100.525,1.51)); +#293396 = DIRECTION('',(0.,0.,-1.)); +#293397 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#293398 = ADVANCED_FACE('',(#293399),#293424,.T.); +#293399 = FACE_BOUND('',#293400,.T.); +#293400 = EDGE_LOOP('',(#293401,#293402,#293410,#293418)); +#293401 = ORIENTED_EDGE('',*,*,#293379,.T.); +#293402 = ORIENTED_EDGE('',*,*,#293403,.T.); +#293403 = EDGE_CURVE('',#293371,#293404,#293406,.T.); +#293404 = VERTEX_POINT('',#293405); +#293405 = CARTESIAN_POINT('',(150.771278,-100.625,1.545)); +#293406 = LINE('',#293407,#293408); +#293407 = CARTESIAN_POINT('',(152.319509,-100.623079,1.545)); +#293408 = VECTOR('',#293409,1.); +#293409 = DIRECTION('',(-0.999999230245,-1.240769963459E-03,0.)); +#293410 = ORIENTED_EDGE('',*,*,#293411,.F.); +#293411 = EDGE_CURVE('',#293412,#293404,#293414,.T.); +#293412 = VERTEX_POINT('',#293413); +#293413 = CARTESIAN_POINT('',(150.771278,-100.625,1.51)); +#293414 = LINE('',#293415,#293416); +#293415 = CARTESIAN_POINT('',(150.771278,-100.625,1.51)); +#293416 = VECTOR('',#293417,1.); +#293417 = DIRECTION('',(0.,0.,1.)); +#293418 = ORIENTED_EDGE('',*,*,#293419,.F.); +#293419 = EDGE_CURVE('',#293380,#293412,#293420,.T.); +#293420 = LINE('',#293421,#293422); +#293421 = CARTESIAN_POINT('',(152.319509,-100.623079,1.51)); +#293422 = VECTOR('',#293423,1.); +#293423 = DIRECTION('',(-0.999999230245,-1.240769963459E-03,0.)); +#293424 = PLANE('',#293425); +#293425 = AXIS2_PLACEMENT_3D('',#293426,#293427,#293428); +#293426 = CARTESIAN_POINT('',(152.319509,-100.623079,1.51)); +#293427 = DIRECTION('',(1.240769963459E-03,-0.999999230245,0.)); +#293428 = DIRECTION('',(-0.999999230245,-1.240769963459E-03,0.)); +#293429 = ADVANCED_FACE('',(#293430),#293455,.T.); +#293430 = FACE_BOUND('',#293431,.T.); +#293431 = EDGE_LOOP('',(#293432,#293433,#293441,#293449)); +#293432 = ORIENTED_EDGE('',*,*,#293411,.T.); +#293433 = ORIENTED_EDGE('',*,*,#293434,.T.); +#293434 = EDGE_CURVE('',#293404,#293435,#293437,.T.); +#293435 = VERTEX_POINT('',#293436); +#293436 = CARTESIAN_POINT('',(150.738006,-100.682628,1.545)); +#293437 = LINE('',#293438,#293439); +#293438 = CARTESIAN_POINT('',(150.771278,-100.625,1.545)); +#293439 = VECTOR('',#293440,1.); +#293440 = DIRECTION('',(-0.500005169787,-0.866022418986,0.)); +#293441 = ORIENTED_EDGE('',*,*,#293442,.F.); +#293442 = EDGE_CURVE('',#293443,#293435,#293445,.T.); +#293443 = VERTEX_POINT('',#293444); +#293444 = CARTESIAN_POINT('',(150.738006,-100.682628,1.51)); +#293445 = LINE('',#293446,#293447); +#293446 = CARTESIAN_POINT('',(150.738006,-100.682628,1.51)); +#293447 = VECTOR('',#293448,1.); +#293448 = DIRECTION('',(0.,0.,1.)); +#293449 = ORIENTED_EDGE('',*,*,#293450,.F.); +#293450 = EDGE_CURVE('',#293412,#293443,#293451,.T.); +#293451 = LINE('',#293452,#293453); +#293452 = CARTESIAN_POINT('',(150.771278,-100.625,1.51)); +#293453 = VECTOR('',#293454,1.); +#293454 = DIRECTION('',(-0.500005169787,-0.866022418986,0.)); +#293455 = PLANE('',#293456); +#293456 = AXIS2_PLACEMENT_3D('',#293457,#293458,#293459); +#293457 = CARTESIAN_POINT('',(150.771278,-100.625,1.51)); +#293458 = DIRECTION('',(0.866022418986,-0.500005169787,0.)); +#293459 = DIRECTION('',(-0.500005169787,-0.866022418986,0.)); +#293460 = ADVANCED_FACE('',(#293461),#293488,.T.); +#293461 = FACE_BOUND('',#293462,.T.); +#293462 = EDGE_LOOP('',(#293463,#293464,#293473,#293481)); +#293463 = ORIENTED_EDGE('',*,*,#293442,.T.); +#293464 = ORIENTED_EDGE('',*,*,#293465,.T.); +#293465 = EDGE_CURVE('',#293435,#293466,#293468,.T.); +#293466 = VERTEX_POINT('',#293467); +#293467 = CARTESIAN_POINT('',(150.777164,-100.385195,1.545)); +#293468 = CIRCLE('',#293469,0.299999971205); +#293469 = AXIS2_PLACEMENT_3D('',#293470,#293471,#293472); +#293470 = CARTESIAN_POINT('',(150.5,-100.4999996158,1.545)); +#293471 = DIRECTION('',(0.,0.,-1.)); +#293472 = DIRECTION('',(0.793353409482,-0.608761338837,0.)); +#293473 = ORIENTED_EDGE('',*,*,#293474,.F.); +#293474 = EDGE_CURVE('',#293475,#293466,#293477,.T.); +#293475 = VERTEX_POINT('',#293476); +#293476 = CARTESIAN_POINT('',(150.777164,-100.385195,1.51)); +#293477 = LINE('',#293478,#293479); +#293478 = CARTESIAN_POINT('',(150.777164,-100.385195,1.51)); +#293479 = VECTOR('',#293480,1.); +#293480 = DIRECTION('',(0.,0.,1.)); +#293481 = ORIENTED_EDGE('',*,*,#293482,.F.); +#293482 = EDGE_CURVE('',#293443,#293475,#293483,.T.); +#293483 = CIRCLE('',#293484,0.299999971205); +#293484 = AXIS2_PLACEMENT_3D('',#293485,#293486,#293487); +#293485 = CARTESIAN_POINT('',(150.5,-100.4999996158,1.51)); +#293486 = DIRECTION('',(0.,0.,-1.)); +#293487 = DIRECTION('',(0.793353409482,-0.608761338837,0.)); +#293488 = CYLINDRICAL_SURFACE('',#293489,0.299999971205); +#293489 = AXIS2_PLACEMENT_3D('',#293490,#293491,#293492); +#293490 = CARTESIAN_POINT('',(150.5,-100.4999996158,1.51)); +#293491 = DIRECTION('',(0.,0.,-1.)); +#293492 = DIRECTION('',(0.793353409482,-0.608761338837,0.)); +#293493 = ADVANCED_FACE('',(#293494),#293510,.T.); +#293494 = FACE_BOUND('',#293495,.T.); +#293495 = EDGE_LOOP('',(#293496,#293497,#293503,#293504)); +#293496 = ORIENTED_EDGE('',*,*,#293474,.T.); +#293497 = ORIENTED_EDGE('',*,*,#293498,.T.); +#293498 = EDGE_CURVE('',#293466,#293332,#293499,.T.); +#293499 = LINE('',#293500,#293501); +#293500 = CARTESIAN_POINT('',(150.777164,-100.385195,1.545)); +#293501 = VECTOR('',#293502,1.); +#293502 = DIRECTION('',(0.258802797775,-0.965930179601,0.)); +#293503 = ORIENTED_EDGE('',*,*,#293329,.F.); +#293504 = ORIENTED_EDGE('',*,*,#293505,.F.); +#293505 = EDGE_CURVE('',#293475,#293330,#293506,.T.); +#293506 = LINE('',#293507,#293508); +#293507 = CARTESIAN_POINT('',(150.777164,-100.385195,1.51)); +#293508 = VECTOR('',#293509,1.); +#293509 = DIRECTION('',(0.258802797775,-0.965930179601,0.)); +#293510 = PLANE('',#293511); +#293511 = AXIS2_PLACEMENT_3D('',#293512,#293513,#293514); +#293512 = CARTESIAN_POINT('',(150.777164,-100.385195,1.51)); +#293513 = DIRECTION('',(0.965930179601,0.258802797775,-0.)); +#293514 = DIRECTION('',(0.258802797775,-0.965930179601,0.)); +#293515 = ADVANCED_FACE('',(#293516),#293543,.F.); +#293516 = FACE_BOUND('',#293517,.T.); +#293517 = EDGE_LOOP('',(#293518,#293528,#293535,#293536)); +#293518 = ORIENTED_EDGE('',*,*,#293519,.T.); +#293519 = EDGE_CURVE('',#293520,#293522,#293524,.T.); +#293520 = VERTEX_POINT('',#293521); +#293521 = CARTESIAN_POINT('',(150.637255,-100.5,1.51)); +#293522 = VERTEX_POINT('',#293523); +#293523 = CARTESIAN_POINT('',(150.637255,-100.5,1.545)); +#293524 = LINE('',#293525,#293526); +#293525 = CARTESIAN_POINT('',(150.637255,-100.5,1.51)); +#293526 = VECTOR('',#293527,1.); +#293527 = DIRECTION('',(0.,0.,1.)); +#293528 = ORIENTED_EDGE('',*,*,#293529,.T.); +#293529 = EDGE_CURVE('',#293522,#293522,#293530,.T.); +#293530 = CIRCLE('',#293531,0.137255); +#293531 = AXIS2_PLACEMENT_3D('',#293532,#293533,#293534); +#293532 = CARTESIAN_POINT('',(150.5,-100.5,1.545)); +#293533 = DIRECTION('',(0.,0.,1.)); +#293534 = DIRECTION('',(1.,0.,-0.)); +#293535 = ORIENTED_EDGE('',*,*,#293519,.F.); +#293536 = ORIENTED_EDGE('',*,*,#293537,.F.); +#293537 = EDGE_CURVE('',#293520,#293520,#293538,.T.); +#293538 = CIRCLE('',#293539,0.137255); +#293539 = AXIS2_PLACEMENT_3D('',#293540,#293541,#293542); +#293540 = CARTESIAN_POINT('',(150.5,-100.5,1.51)); +#293541 = DIRECTION('',(0.,0.,1.)); +#293542 = DIRECTION('',(1.,0.,-0.)); +#293543 = CYLINDRICAL_SURFACE('',#293544,0.137255); +#293544 = AXIS2_PLACEMENT_3D('',#293545,#293546,#293547); +#293545 = CARTESIAN_POINT('',(150.5,-100.5,1.51)); +#293546 = DIRECTION('',(-0.,-0.,-1.)); +#293547 = DIRECTION('',(1.,0.,-0.)); +#293548 = ADVANCED_FACE('',(#293549,#293557),#293560,.F.); +#293549 = FACE_BOUND('',#293550,.T.); +#293550 = EDGE_LOOP('',(#293551,#293552,#293553,#293554,#293555,#293556) + ); +#293551 = ORIENTED_EDGE('',*,*,#293355,.T.); +#293552 = ORIENTED_EDGE('',*,*,#293387,.T.); +#293553 = ORIENTED_EDGE('',*,*,#293419,.T.); +#293554 = ORIENTED_EDGE('',*,*,#293450,.T.); +#293555 = ORIENTED_EDGE('',*,*,#293482,.T.); +#293556 = ORIENTED_EDGE('',*,*,#293505,.T.); +#293557 = FACE_BOUND('',#293558,.T.); +#293558 = EDGE_LOOP('',(#293559)); +#293559 = ORIENTED_EDGE('',*,*,#293537,.T.); +#293560 = PLANE('',#293561); +#293561 = AXIS2_PLACEMENT_3D('',#293562,#293563,#293564); +#293562 = CARTESIAN_POINT('',(0.,0.,1.51)); +#293563 = DIRECTION('',(0.,0.,1.)); +#293564 = DIRECTION('',(1.,0.,-0.)); +#293565 = ADVANCED_FACE('',(#293566,#293574),#293577,.T.); +#293566 = FACE_BOUND('',#293567,.F.); +#293567 = EDGE_LOOP('',(#293568,#293569,#293570,#293571,#293572,#293573) + ); +#293568 = ORIENTED_EDGE('',*,*,#293339,.T.); +#293569 = ORIENTED_EDGE('',*,*,#293370,.T.); +#293570 = ORIENTED_EDGE('',*,*,#293403,.T.); +#293571 = ORIENTED_EDGE('',*,*,#293434,.T.); +#293572 = ORIENTED_EDGE('',*,*,#293465,.T.); +#293573 = ORIENTED_EDGE('',*,*,#293498,.T.); +#293574 = FACE_BOUND('',#293575,.F.); +#293575 = EDGE_LOOP('',(#293576)); +#293576 = ORIENTED_EDGE('',*,*,#293529,.T.); +#293577 = PLANE('',#293578); +#293578 = AXIS2_PLACEMENT_3D('',#293579,#293580,#293581); +#293579 = CARTESIAN_POINT('',(0.,0.,1.545)); +#293580 = DIRECTION('',(0.,0.,1.)); +#293581 = DIRECTION('',(1.,0.,-0.)); +#293582 = MANIFOLD_SOLID_BREP('',#293583); +#293583 = CLOSED_SHELL('',(#293584,#293626,#293657,#293688,#293719, + #293750,#293783,#293814,#293845,#293878,#293909,#293940,#293973, + #294004,#294035,#294066,#294097,#294119,#294152,#294180)); +#293584 = ADVANCED_FACE('',(#293585),#293621,.T.); +#293585 = FACE_BOUND('',#293586,.T.); +#293586 = EDGE_LOOP('',(#293587,#293597,#293606,#293614)); +#293587 = ORIENTED_EDGE('',*,*,#293588,.T.); +#293588 = EDGE_CURVE('',#293589,#293591,#293593,.T.); +#293589 = VERTEX_POINT('',#293590); +#293590 = CARTESIAN_POINT('',(148.444443,-93.396853,1.51)); +#293591 = VERTEX_POINT('',#293592); +#293592 = CARTESIAN_POINT('',(148.444443,-93.396853,1.545)); +#293593 = LINE('',#293594,#293595); +#293594 = CARTESIAN_POINT('',(148.444443,-93.396853,1.51)); +#293595 = VECTOR('',#293596,1.); +#293596 = DIRECTION('',(0.,0.,1.)); +#293597 = ORIENTED_EDGE('',*,*,#293598,.T.); +#293598 = EDGE_CURVE('',#293591,#293599,#293601,.T.); +#293599 = VERTEX_POINT('',#293600); +#293600 = CARTESIAN_POINT('',(148.598079,-93.460491,1.545)); +#293601 = CIRCLE('',#293602,0.100000590676); +#293602 = AXIS2_PLACEMENT_3D('',#293603,#293604,#293605); +#293603 = CARTESIAN_POINT('',(148.5,-93.48000068719,1.545)); +#293604 = DIRECTION('',(0.,0.,-1.)); +#293605 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#293606 = ORIENTED_EDGE('',*,*,#293607,.F.); +#293607 = EDGE_CURVE('',#293608,#293599,#293610,.T.); +#293608 = VERTEX_POINT('',#293609); +#293609 = CARTESIAN_POINT('',(148.598079,-93.460491,1.51)); +#293610 = LINE('',#293611,#293612); +#293611 = CARTESIAN_POINT('',(148.598079,-93.460491,1.51)); +#293612 = VECTOR('',#293613,1.); +#293613 = DIRECTION('',(0.,0.,1.)); +#293614 = ORIENTED_EDGE('',*,*,#293615,.F.); +#293615 = EDGE_CURVE('',#293589,#293608,#293616,.T.); +#293616 = CIRCLE('',#293617,0.100000590676); +#293617 = AXIS2_PLACEMENT_3D('',#293618,#293619,#293620); +#293618 = CARTESIAN_POINT('',(148.5,-93.48000068719,1.51)); +#293619 = DIRECTION('',(0.,0.,-1.)); +#293620 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#293621 = CYLINDRICAL_SURFACE('',#293622,0.100000590676); +#293622 = AXIS2_PLACEMENT_3D('',#293623,#293624,#293625); +#293623 = CARTESIAN_POINT('',(148.5,-93.48000068719,1.51)); +#293624 = DIRECTION('',(0.,0.,-1.)); +#293625 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#293626 = ADVANCED_FACE('',(#293627),#293652,.T.); +#293627 = FACE_BOUND('',#293628,.T.); +#293628 = EDGE_LOOP('',(#293629,#293630,#293638,#293646)); +#293629 = ORIENTED_EDGE('',*,*,#293607,.T.); +#293630 = ORIENTED_EDGE('',*,*,#293631,.T.); +#293631 = EDGE_CURVE('',#293599,#293632,#293634,.T.); +#293632 = VERTEX_POINT('',#293633); +#293633 = CARTESIAN_POINT('',(148.598079,-95.519509,1.545)); +#293634 = LINE('',#293635,#293636); +#293635 = CARTESIAN_POINT('',(148.598079,-93.460491,1.545)); +#293636 = VECTOR('',#293637,1.); +#293637 = DIRECTION('',(0.,-1.,0.)); +#293638 = ORIENTED_EDGE('',*,*,#293639,.F.); +#293639 = EDGE_CURVE('',#293640,#293632,#293642,.T.); +#293640 = VERTEX_POINT('',#293641); +#293641 = CARTESIAN_POINT('',(148.598079,-95.519509,1.51)); +#293642 = LINE('',#293643,#293644); +#293643 = CARTESIAN_POINT('',(148.598079,-95.519509,1.51)); +#293644 = VECTOR('',#293645,1.); +#293645 = DIRECTION('',(0.,0.,1.)); +#293646 = ORIENTED_EDGE('',*,*,#293647,.F.); +#293647 = EDGE_CURVE('',#293608,#293640,#293648,.T.); +#293648 = LINE('',#293649,#293650); +#293649 = CARTESIAN_POINT('',(148.598079,-93.460491,1.51)); +#293650 = VECTOR('',#293651,1.); +#293651 = DIRECTION('',(0.,-1.,0.)); +#293652 = PLANE('',#293653); +#293653 = AXIS2_PLACEMENT_3D('',#293654,#293655,#293656); +#293654 = CARTESIAN_POINT('',(148.598079,-93.460491,1.51)); +#293655 = DIRECTION('',(1.,0.,-0.)); +#293656 = DIRECTION('',(0.,-1.,0.)); +#293657 = ADVANCED_FACE('',(#293658),#293683,.T.); +#293658 = FACE_BOUND('',#293659,.T.); +#293659 = EDGE_LOOP('',(#293660,#293661,#293669,#293677)); +#293660 = ORIENTED_EDGE('',*,*,#293639,.T.); +#293661 = ORIENTED_EDGE('',*,*,#293662,.T.); +#293662 = EDGE_CURVE('',#293632,#293663,#293665,.T.); +#293663 = VERTEX_POINT('',#293664); +#293664 = CARTESIAN_POINT('',(148.583148,-95.555557,1.545)); +#293665 = LINE('',#293666,#293667); +#293666 = CARTESIAN_POINT('',(148.598079,-95.519509,1.545)); +#293667 = VECTOR('',#293668,1.); +#293668 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#293669 = ORIENTED_EDGE('',*,*,#293670,.F.); +#293670 = EDGE_CURVE('',#293671,#293663,#293673,.T.); +#293671 = VERTEX_POINT('',#293672); +#293672 = CARTESIAN_POINT('',(148.583148,-95.555557,1.51)); +#293673 = LINE('',#293674,#293675); +#293674 = CARTESIAN_POINT('',(148.583148,-95.555557,1.51)); +#293675 = VECTOR('',#293676,1.); +#293676 = DIRECTION('',(0.,0.,1.)); +#293677 = ORIENTED_EDGE('',*,*,#293678,.F.); +#293678 = EDGE_CURVE('',#293640,#293671,#293679,.T.); +#293679 = LINE('',#293680,#293681); +#293680 = CARTESIAN_POINT('',(148.598079,-95.519509,1.51)); +#293681 = VECTOR('',#293682,1.); +#293682 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#293683 = PLANE('',#293684); +#293684 = AXIS2_PLACEMENT_3D('',#293685,#293686,#293687); +#293685 = CARTESIAN_POINT('',(148.598079,-95.519509,1.51)); +#293686 = DIRECTION('',(0.923884701879,-0.382670952169,0.)); +#293687 = DIRECTION('',(-0.382670952169,-0.923884701879,0.)); +#293688 = ADVANCED_FACE('',(#293689),#293714,.T.); +#293689 = FACE_BOUND('',#293690,.T.); +#293690 = EDGE_LOOP('',(#293691,#293692,#293700,#293708)); +#293691 = ORIENTED_EDGE('',*,*,#293670,.T.); +#293692 = ORIENTED_EDGE('',*,*,#293693,.T.); +#293693 = EDGE_CURVE('',#293663,#293694,#293696,.T.); +#293694 = VERTEX_POINT('',#293695); +#293695 = CARTESIAN_POINT('',(147.7695,-96.371921,1.545)); +#293696 = LINE('',#293697,#293698); +#293697 = CARTESIAN_POINT('',(148.583148,-95.555557,1.545)); +#293698 = VECTOR('',#293699,1.); +#293699 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#293700 = ORIENTED_EDGE('',*,*,#293701,.F.); +#293701 = EDGE_CURVE('',#293702,#293694,#293704,.T.); +#293702 = VERTEX_POINT('',#293703); +#293703 = CARTESIAN_POINT('',(147.7695,-96.371921,1.51)); +#293704 = LINE('',#293705,#293706); +#293705 = CARTESIAN_POINT('',(147.7695,-96.371921,1.51)); +#293706 = VECTOR('',#293707,1.); +#293707 = DIRECTION('',(0.,0.,1.)); +#293708 = ORIENTED_EDGE('',*,*,#293709,.F.); +#293709 = EDGE_CURVE('',#293671,#293702,#293710,.T.); +#293710 = LINE('',#293711,#293712); +#293711 = CARTESIAN_POINT('',(148.583148,-95.555557,1.51)); +#293712 = VECTOR('',#293713,1.); +#293713 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#293714 = PLANE('',#293715); +#293715 = AXIS2_PLACEMENT_3D('',#293716,#293717,#293718); +#293716 = CARTESIAN_POINT('',(148.583148,-95.555557,1.51)); +#293717 = DIRECTION('',(0.708284011379,-0.705927587805,0.)); +#293718 = DIRECTION('',(-0.705927587805,-0.708284011379,0.)); +#293719 = ADVANCED_FACE('',(#293720),#293745,.T.); +#293720 = FACE_BOUND('',#293721,.T.); +#293721 = EDGE_LOOP('',(#293722,#293723,#293731,#293739)); +#293722 = ORIENTED_EDGE('',*,*,#293701,.T.); +#293723 = ORIENTED_EDGE('',*,*,#293724,.T.); +#293724 = EDGE_CURVE('',#293694,#293725,#293727,.T.); +#293725 = VERTEX_POINT('',#293726); +#293726 = CARTESIAN_POINT('',(147.777164,-96.385195,1.545)); +#293727 = LINE('',#293728,#293729); +#293728 = CARTESIAN_POINT('',(147.7695,-96.371921,1.545)); +#293729 = VECTOR('',#293730,1.); +#293730 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#293731 = ORIENTED_EDGE('',*,*,#293732,.F.); +#293732 = EDGE_CURVE('',#293733,#293725,#293735,.T.); +#293733 = VERTEX_POINT('',#293734); +#293734 = CARTESIAN_POINT('',(147.777164,-96.385195,1.51)); +#293735 = LINE('',#293736,#293737); +#293736 = CARTESIAN_POINT('',(147.777164,-96.385195,1.51)); +#293737 = VECTOR('',#293738,1.); +#293738 = DIRECTION('',(0.,0.,1.)); +#293739 = ORIENTED_EDGE('',*,*,#293740,.F.); +#293740 = EDGE_CURVE('',#293702,#293733,#293741,.T.); +#293741 = LINE('',#293742,#293743); +#293742 = CARTESIAN_POINT('',(147.7695,-96.371921,1.51)); +#293743 = VECTOR('',#293744,1.); +#293744 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#293745 = PLANE('',#293746); +#293746 = AXIS2_PLACEMENT_3D('',#293747,#293748,#293749); +#293747 = CARTESIAN_POINT('',(147.7695,-96.371921,1.51)); +#293748 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#293749 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#293750 = ADVANCED_FACE('',(#293751),#293778,.T.); +#293751 = FACE_BOUND('',#293752,.T.); +#293752 = EDGE_LOOP('',(#293753,#293754,#293763,#293771)); +#293753 = ORIENTED_EDGE('',*,*,#293732,.T.); +#293754 = ORIENTED_EDGE('',*,*,#293755,.T.); +#293755 = EDGE_CURVE('',#293725,#293756,#293758,.T.); +#293756 = VERTEX_POINT('',#293757); +#293757 = CARTESIAN_POINT('',(147.385195,-96.777164,1.545)); +#293758 = CIRCLE('',#293759,0.300000357606); +#293759 = AXIS2_PLACEMENT_3D('',#293760,#293761,#293762); +#293760 = CARTESIAN_POINT('',(147.49999955764,-96.49999955764,1.545)); +#293761 = DIRECTION('',(0.,0.,-1.)); +#293762 = DIRECTION('',(0.92388037325,0.382681402637,0.)); +#293763 = ORIENTED_EDGE('',*,*,#293764,.F.); +#293764 = EDGE_CURVE('',#293765,#293756,#293767,.T.); +#293765 = VERTEX_POINT('',#293766); +#293766 = CARTESIAN_POINT('',(147.385195,-96.777164,1.51)); +#293767 = LINE('',#293768,#293769); +#293768 = CARTESIAN_POINT('',(147.385195,-96.777164,1.51)); +#293769 = VECTOR('',#293770,1.); +#293770 = DIRECTION('',(0.,0.,1.)); +#293771 = ORIENTED_EDGE('',*,*,#293772,.F.); +#293772 = EDGE_CURVE('',#293733,#293765,#293773,.T.); +#293773 = CIRCLE('',#293774,0.300000357606); +#293774 = AXIS2_PLACEMENT_3D('',#293775,#293776,#293777); +#293775 = CARTESIAN_POINT('',(147.49999955764,-96.49999955764,1.51)); +#293776 = DIRECTION('',(0.,0.,-1.)); +#293777 = DIRECTION('',(0.92388037325,0.382681402637,0.)); +#293778 = CYLINDRICAL_SURFACE('',#293779,0.300000357606); +#293779 = AXIS2_PLACEMENT_3D('',#293780,#293781,#293782); +#293780 = CARTESIAN_POINT('',(147.49999955764,-96.49999955764,1.51)); +#293781 = DIRECTION('',(0.,0.,-1.)); +#293782 = DIRECTION('',(0.92388037325,0.382681402637,0.)); +#293783 = ADVANCED_FACE('',(#293784),#293809,.T.); +#293784 = FACE_BOUND('',#293785,.T.); +#293785 = EDGE_LOOP('',(#293786,#293787,#293795,#293803)); +#293786 = ORIENTED_EDGE('',*,*,#293764,.T.); +#293787 = ORIENTED_EDGE('',*,*,#293788,.T.); +#293788 = EDGE_CURVE('',#293756,#293789,#293791,.T.); +#293789 = VERTEX_POINT('',#293790); +#293790 = CARTESIAN_POINT('',(147.371921,-96.7695,1.545)); +#293791 = LINE('',#293792,#293793); +#293792 = CARTESIAN_POINT('',(147.385195,-96.777164,1.545)); +#293793 = VECTOR('',#293794,1.); +#293794 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#293795 = ORIENTED_EDGE('',*,*,#293796,.F.); +#293796 = EDGE_CURVE('',#293797,#293789,#293799,.T.); +#293797 = VERTEX_POINT('',#293798); +#293798 = CARTESIAN_POINT('',(147.371921,-96.7695,1.51)); +#293799 = LINE('',#293800,#293801); +#293800 = CARTESIAN_POINT('',(147.371921,-96.7695,1.51)); +#293801 = VECTOR('',#293802,1.); +#293802 = DIRECTION('',(0.,0.,1.)); +#293803 = ORIENTED_EDGE('',*,*,#293804,.F.); +#293804 = EDGE_CURVE('',#293765,#293797,#293805,.T.); +#293805 = LINE('',#293806,#293807); +#293806 = CARTESIAN_POINT('',(147.385195,-96.777164,1.51)); +#293807 = VECTOR('',#293808,1.); +#293808 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#293809 = PLANE('',#293810); +#293810 = AXIS2_PLACEMENT_3D('',#293811,#293812,#293813); +#293811 = CARTESIAN_POINT('',(147.385195,-96.777164,1.51)); +#293812 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#293813 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#293814 = ADVANCED_FACE('',(#293815),#293840,.T.); +#293815 = FACE_BOUND('',#293816,.T.); +#293816 = EDGE_LOOP('',(#293817,#293818,#293826,#293834)); +#293817 = ORIENTED_EDGE('',*,*,#293796,.T.); +#293818 = ORIENTED_EDGE('',*,*,#293819,.T.); +#293819 = EDGE_CURVE('',#293789,#293820,#293822,.T.); +#293820 = VERTEX_POINT('',#293821); +#293821 = CARTESIAN_POINT('',(146.660308,-97.479299,1.545)); +#293822 = LINE('',#293823,#293824); +#293823 = CARTESIAN_POINT('',(147.371921,-96.7695,1.545)); +#293824 = VECTOR('',#293825,1.); +#293825 = DIRECTION('',(-0.708008611321,-0.706203799406,0.)); +#293826 = ORIENTED_EDGE('',*,*,#293827,.F.); +#293827 = EDGE_CURVE('',#293828,#293820,#293830,.T.); +#293828 = VERTEX_POINT('',#293829); +#293829 = CARTESIAN_POINT('',(146.660308,-97.479299,1.51)); +#293830 = LINE('',#293831,#293832); +#293831 = CARTESIAN_POINT('',(146.660308,-97.479299,1.51)); +#293832 = VECTOR('',#293833,1.); +#293833 = DIRECTION('',(0.,0.,1.)); +#293834 = ORIENTED_EDGE('',*,*,#293835,.F.); +#293835 = EDGE_CURVE('',#293797,#293828,#293836,.T.); +#293836 = LINE('',#293837,#293838); +#293837 = CARTESIAN_POINT('',(147.371921,-96.7695,1.51)); +#293838 = VECTOR('',#293839,1.); +#293839 = DIRECTION('',(-0.708008611321,-0.706203799406,0.)); +#293840 = PLANE('',#293841); +#293841 = AXIS2_PLACEMENT_3D('',#293842,#293843,#293844); +#293842 = CARTESIAN_POINT('',(147.371921,-96.7695,1.51)); +#293843 = DIRECTION('',(0.706203799406,-0.708008611321,0.)); +#293844 = DIRECTION('',(-0.708008611321,-0.706203799406,0.)); +#293845 = ADVANCED_FACE('',(#293846),#293873,.F.); +#293846 = FACE_BOUND('',#293847,.T.); +#293847 = EDGE_LOOP('',(#293848,#293849,#293858,#293866)); +#293848 = ORIENTED_EDGE('',*,*,#293827,.T.); +#293849 = ORIENTED_EDGE('',*,*,#293850,.T.); +#293850 = EDGE_CURVE('',#293820,#293851,#293853,.T.); +#293851 = VERTEX_POINT('',#293852); +#293852 = CARTESIAN_POINT('',(146.524909,-97.333667,1.545)); +#293853 = CIRCLE('',#293854,0.341863673981); +#293854 = AXIS2_PLACEMENT_3D('',#293855,#293856,#293857); +#293855 = CARTESIAN_POINT('',(146.35306075744,-97.62919864487,1.545)); +#293856 = DIRECTION('',(0.,0.,1.)); +#293857 = DIRECTION('',(0.898742001377,0.438477838621,-0.)); +#293858 = ORIENTED_EDGE('',*,*,#293859,.F.); +#293859 = EDGE_CURVE('',#293860,#293851,#293862,.T.); +#293860 = VERTEX_POINT('',#293861); +#293861 = CARTESIAN_POINT('',(146.524909,-97.333667,1.51)); +#293862 = LINE('',#293863,#293864); +#293863 = CARTESIAN_POINT('',(146.524909,-97.333667,1.51)); +#293864 = VECTOR('',#293865,1.); +#293865 = DIRECTION('',(0.,0.,1.)); +#293866 = ORIENTED_EDGE('',*,*,#293867,.F.); +#293867 = EDGE_CURVE('',#293828,#293860,#293868,.T.); +#293868 = CIRCLE('',#293869,0.341863673981); +#293869 = AXIS2_PLACEMENT_3D('',#293870,#293871,#293872); +#293870 = CARTESIAN_POINT('',(146.35306075744,-97.62919864487,1.51)); +#293871 = DIRECTION('',(0.,0.,1.)); +#293872 = DIRECTION('',(0.898742001377,0.438477838621,-0.)); +#293873 = CYLINDRICAL_SURFACE('',#293874,0.341863673981); +#293874 = AXIS2_PLACEMENT_3D('',#293875,#293876,#293877); +#293875 = CARTESIAN_POINT('',(146.35306075744,-97.62919864487,1.51)); +#293876 = DIRECTION('',(-0.,-0.,-1.)); +#293877 = DIRECTION('',(0.898742001377,0.438477838621,-0.)); +#293878 = ADVANCED_FACE('',(#293879),#293904,.T.); +#293879 = FACE_BOUND('',#293880,.T.); +#293880 = EDGE_LOOP('',(#293881,#293882,#293890,#293898)); +#293881 = ORIENTED_EDGE('',*,*,#293859,.T.); +#293882 = ORIENTED_EDGE('',*,*,#293883,.T.); +#293883 = EDGE_CURVE('',#293851,#293884,#293886,.T.); +#293884 = VERTEX_POINT('',#293885); +#293885 = CARTESIAN_POINT('',(147.230499,-96.628078,1.545)); +#293886 = LINE('',#293887,#293888); +#293887 = CARTESIAN_POINT('',(146.524909,-97.333667,1.545)); +#293888 = VECTOR('',#293889,1.); +#293889 = DIRECTION('',(0.707107282262,0.707106280111,0.)); +#293890 = ORIENTED_EDGE('',*,*,#293891,.F.); +#293891 = EDGE_CURVE('',#293892,#293884,#293894,.T.); +#293892 = VERTEX_POINT('',#293893); +#293893 = CARTESIAN_POINT('',(147.230499,-96.628078,1.51)); +#293894 = LINE('',#293895,#293896); +#293895 = CARTESIAN_POINT('',(147.230499,-96.628078,1.51)); +#293896 = VECTOR('',#293897,1.); +#293897 = DIRECTION('',(0.,0.,1.)); +#293898 = ORIENTED_EDGE('',*,*,#293899,.F.); +#293899 = EDGE_CURVE('',#293860,#293892,#293900,.T.); +#293900 = LINE('',#293901,#293902); +#293901 = CARTESIAN_POINT('',(146.524909,-97.333667,1.51)); +#293902 = VECTOR('',#293903,1.); +#293903 = DIRECTION('',(0.707107282262,0.707106280111,0.)); +#293904 = PLANE('',#293905); +#293905 = AXIS2_PLACEMENT_3D('',#293906,#293907,#293908); +#293906 = CARTESIAN_POINT('',(146.524909,-97.333667,1.51)); +#293907 = DIRECTION('',(-0.707106280111,0.707107282262,0.)); +#293908 = DIRECTION('',(0.707107282262,0.707106280111,0.)); +#293909 = ADVANCED_FACE('',(#293910),#293935,.T.); +#293910 = FACE_BOUND('',#293911,.T.); +#293911 = EDGE_LOOP('',(#293912,#293913,#293921,#293929)); +#293912 = ORIENTED_EDGE('',*,*,#293891,.T.); +#293913 = ORIENTED_EDGE('',*,*,#293914,.T.); +#293914 = EDGE_CURVE('',#293884,#293915,#293917,.T.); +#293915 = VERTEX_POINT('',#293916); +#293916 = CARTESIAN_POINT('',(147.222836,-96.614805,1.545)); +#293917 = LINE('',#293918,#293919); +#293918 = CARTESIAN_POINT('',(147.230499,-96.628078,1.545)); +#293919 = VECTOR('',#293920,1.); +#293920 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#293921 = ORIENTED_EDGE('',*,*,#293922,.F.); +#293922 = EDGE_CURVE('',#293923,#293915,#293925,.T.); +#293923 = VERTEX_POINT('',#293924); +#293924 = CARTESIAN_POINT('',(147.222836,-96.614805,1.51)); +#293925 = LINE('',#293926,#293927); +#293926 = CARTESIAN_POINT('',(147.222836,-96.614805,1.51)); +#293927 = VECTOR('',#293928,1.); +#293928 = DIRECTION('',(0.,0.,1.)); +#293929 = ORIENTED_EDGE('',*,*,#293930,.F.); +#293930 = EDGE_CURVE('',#293892,#293923,#293931,.T.); +#293931 = LINE('',#293932,#293933); +#293932 = CARTESIAN_POINT('',(147.230499,-96.628078,1.51)); +#293933 = VECTOR('',#293934,1.); +#293934 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#293935 = PLANE('',#293936); +#293936 = AXIS2_PLACEMENT_3D('',#293937,#293938,#293939); +#293937 = CARTESIAN_POINT('',(147.230499,-96.628078,1.51)); +#293938 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#293939 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#293940 = ADVANCED_FACE('',(#293941),#293968,.T.); +#293941 = FACE_BOUND('',#293942,.T.); +#293942 = EDGE_LOOP('',(#293943,#293944,#293953,#293961)); +#293943 = ORIENTED_EDGE('',*,*,#293922,.T.); +#293944 = ORIENTED_EDGE('',*,*,#293945,.T.); +#293945 = EDGE_CURVE('',#293915,#293946,#293948,.T.); +#293946 = VERTEX_POINT('',#293947); +#293947 = CARTESIAN_POINT('',(147.614805,-96.222836,1.545)); +#293948 = CIRCLE('',#293949,0.300000357606); +#293949 = AXIS2_PLACEMENT_3D('',#293950,#293951,#293952); +#293950 = CARTESIAN_POINT('',(147.50000044236,-96.50000044236,1.545)); +#293951 = DIRECTION('',(0.,0.,-1.)); +#293952 = DIRECTION('',(-0.92388037325,-0.382681402637,-0.)); +#293953 = ORIENTED_EDGE('',*,*,#293954,.F.); +#293954 = EDGE_CURVE('',#293955,#293946,#293957,.T.); +#293955 = VERTEX_POINT('',#293956); +#293956 = CARTESIAN_POINT('',(147.614805,-96.222836,1.51)); +#293957 = LINE('',#293958,#293959); +#293958 = CARTESIAN_POINT('',(147.614805,-96.222836,1.51)); +#293959 = VECTOR('',#293960,1.); +#293960 = DIRECTION('',(0.,0.,1.)); +#293961 = ORIENTED_EDGE('',*,*,#293962,.F.); +#293962 = EDGE_CURVE('',#293923,#293955,#293963,.T.); +#293963 = CIRCLE('',#293964,0.300000357606); +#293964 = AXIS2_PLACEMENT_3D('',#293965,#293966,#293967); +#293965 = CARTESIAN_POINT('',(147.50000044236,-96.50000044236,1.51)); +#293966 = DIRECTION('',(0.,0.,-1.)); +#293967 = DIRECTION('',(-0.92388037325,-0.382681402637,-0.)); +#293968 = CYLINDRICAL_SURFACE('',#293969,0.300000357606); +#293969 = AXIS2_PLACEMENT_3D('',#293970,#293971,#293972); +#293970 = CARTESIAN_POINT('',(147.50000044236,-96.50000044236,1.51)); +#293971 = DIRECTION('',(0.,0.,-1.)); +#293972 = DIRECTION('',(-0.92388037325,-0.382681402637,-0.)); +#293973 = ADVANCED_FACE('',(#293974),#293999,.T.); +#293974 = FACE_BOUND('',#293975,.T.); +#293975 = EDGE_LOOP('',(#293976,#293977,#293985,#293993)); +#293976 = ORIENTED_EDGE('',*,*,#293954,.T.); +#293977 = ORIENTED_EDGE('',*,*,#293978,.T.); +#293978 = EDGE_CURVE('',#293946,#293979,#293981,.T.); +#293979 = VERTEX_POINT('',#293980); +#293980 = CARTESIAN_POINT('',(147.628078,-96.230499,1.545)); +#293981 = LINE('',#293982,#293983); +#293982 = CARTESIAN_POINT('',(147.614805,-96.222836,1.545)); +#293983 = VECTOR('',#293984,1.); +#293984 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#293985 = ORIENTED_EDGE('',*,*,#293986,.F.); +#293986 = EDGE_CURVE('',#293987,#293979,#293989,.T.); +#293987 = VERTEX_POINT('',#293988); +#293988 = CARTESIAN_POINT('',(147.628078,-96.230499,1.51)); +#293989 = LINE('',#293990,#293991); +#293990 = CARTESIAN_POINT('',(147.628078,-96.230499,1.51)); +#293991 = VECTOR('',#293992,1.); +#293992 = DIRECTION('',(0.,0.,1.)); +#293993 = ORIENTED_EDGE('',*,*,#293994,.F.); +#293994 = EDGE_CURVE('',#293955,#293987,#293995,.T.); +#293995 = LINE('',#293996,#293997); +#293996 = CARTESIAN_POINT('',(147.614805,-96.222836,1.51)); +#293997 = VECTOR('',#293998,1.); +#293998 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#293999 = PLANE('',#294000); +#294000 = AXIS2_PLACEMENT_3D('',#294001,#294002,#294003); +#294001 = CARTESIAN_POINT('',(147.614805,-96.222836,1.51)); +#294002 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#294003 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#294004 = ADVANCED_FACE('',(#294005),#294030,.T.); +#294005 = FACE_BOUND('',#294006,.T.); +#294006 = EDGE_LOOP('',(#294007,#294008,#294016,#294024)); +#294007 = ORIENTED_EDGE('',*,*,#293986,.T.); +#294008 = ORIENTED_EDGE('',*,*,#294009,.T.); +#294009 = EDGE_CURVE('',#293979,#294010,#294012,.T.); +#294010 = VERTEX_POINT('',#294011); +#294011 = CARTESIAN_POINT('',(148.4,-95.458578,1.545)); +#294012 = LINE('',#294013,#294014); +#294013 = CARTESIAN_POINT('',(147.628078,-96.230499,1.545)); +#294014 = VECTOR('',#294015,1.); +#294015 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#294016 = ORIENTED_EDGE('',*,*,#294017,.F.); +#294017 = EDGE_CURVE('',#294018,#294010,#294020,.T.); +#294018 = VERTEX_POINT('',#294019); +#294019 = CARTESIAN_POINT('',(148.4,-95.458578,1.51)); +#294020 = LINE('',#294021,#294022); +#294021 = CARTESIAN_POINT('',(148.4,-95.458578,1.51)); +#294022 = VECTOR('',#294023,1.); +#294023 = DIRECTION('',(0.,0.,1.)); +#294024 = ORIENTED_EDGE('',*,*,#294025,.F.); +#294025 = EDGE_CURVE('',#293987,#294018,#294026,.T.); +#294026 = LINE('',#294027,#294028); +#294027 = CARTESIAN_POINT('',(147.628078,-96.230499,1.51)); +#294028 = VECTOR('',#294029,1.); +#294029 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#294030 = PLANE('',#294031); +#294031 = AXIS2_PLACEMENT_3D('',#294032,#294033,#294034); +#294032 = CARTESIAN_POINT('',(147.628078,-96.230499,1.51)); +#294033 = DIRECTION('',(-0.707106323169,0.707107239204,0.)); +#294034 = DIRECTION('',(0.707107239204,0.707106323169,0.)); +#294035 = ADVANCED_FACE('',(#294036),#294061,.T.); +#294036 = FACE_BOUND('',#294037,.T.); +#294037 = EDGE_LOOP('',(#294038,#294039,#294047,#294055)); +#294038 = ORIENTED_EDGE('',*,*,#294017,.T.); +#294039 = ORIENTED_EDGE('',*,*,#294040,.T.); +#294040 = EDGE_CURVE('',#294010,#294041,#294043,.T.); +#294041 = VERTEX_POINT('',#294042); +#294042 = CARTESIAN_POINT('',(148.401921,-93.460491,1.545)); +#294043 = LINE('',#294044,#294045); +#294044 = CARTESIAN_POINT('',(148.4,-95.458578,1.545)); +#294045 = VECTOR('',#294046,1.); +#294046 = DIRECTION('',(9.614191535031E-04,0.999999537836,0.)); +#294047 = ORIENTED_EDGE('',*,*,#294048,.F.); +#294048 = EDGE_CURVE('',#294049,#294041,#294051,.T.); +#294049 = VERTEX_POINT('',#294050); +#294050 = CARTESIAN_POINT('',(148.401921,-93.460491,1.51)); +#294051 = LINE('',#294052,#294053); +#294052 = CARTESIAN_POINT('',(148.401921,-93.460491,1.51)); +#294053 = VECTOR('',#294054,1.); +#294054 = DIRECTION('',(0.,0.,1.)); +#294055 = ORIENTED_EDGE('',*,*,#294056,.F.); +#294056 = EDGE_CURVE('',#294018,#294049,#294057,.T.); +#294057 = LINE('',#294058,#294059); +#294058 = CARTESIAN_POINT('',(148.4,-95.458578,1.51)); +#294059 = VECTOR('',#294060,1.); +#294060 = DIRECTION('',(9.614191535031E-04,0.999999537836,0.)); +#294061 = PLANE('',#294062); +#294062 = AXIS2_PLACEMENT_3D('',#294063,#294064,#294065); +#294063 = CARTESIAN_POINT('',(148.4,-95.458578,1.51)); +#294064 = DIRECTION('',(-0.999999537836,9.614191535031E-04,0.)); +#294065 = DIRECTION('',(9.614191535031E-04,0.999999537836,0.)); +#294066 = ADVANCED_FACE('',(#294067),#294092,.T.); +#294067 = FACE_BOUND('',#294068,.T.); +#294068 = EDGE_LOOP('',(#294069,#294070,#294078,#294086)); +#294069 = ORIENTED_EDGE('',*,*,#294048,.T.); +#294070 = ORIENTED_EDGE('',*,*,#294071,.T.); +#294071 = EDGE_CURVE('',#294041,#294072,#294074,.T.); +#294072 = VERTEX_POINT('',#294073); +#294073 = CARTESIAN_POINT('',(148.416853,-93.424443,1.545)); +#294074 = LINE('',#294075,#294076); +#294075 = CARTESIAN_POINT('',(148.401921,-93.460491,1.545)); +#294076 = VECTOR('',#294077,1.); +#294077 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#294078 = ORIENTED_EDGE('',*,*,#294079,.F.); +#294079 = EDGE_CURVE('',#294080,#294072,#294082,.T.); +#294080 = VERTEX_POINT('',#294081); +#294081 = CARTESIAN_POINT('',(148.416853,-93.424443,1.51)); +#294082 = LINE('',#294083,#294084); +#294083 = CARTESIAN_POINT('',(148.416853,-93.424443,1.51)); +#294084 = VECTOR('',#294085,1.); +#294085 = DIRECTION('',(0.,0.,1.)); +#294086 = ORIENTED_EDGE('',*,*,#294087,.F.); +#294087 = EDGE_CURVE('',#294049,#294080,#294088,.T.); +#294088 = LINE('',#294089,#294090); +#294089 = CARTESIAN_POINT('',(148.401921,-93.460491,1.51)); +#294090 = VECTOR('',#294091,1.); +#294091 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#294092 = PLANE('',#294093); +#294093 = AXIS2_PLACEMENT_3D('',#294094,#294095,#294096); +#294094 = CARTESIAN_POINT('',(148.401921,-93.460491,1.51)); +#294095 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#294096 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#294097 = ADVANCED_FACE('',(#294098),#294114,.T.); +#294098 = FACE_BOUND('',#294099,.T.); +#294099 = EDGE_LOOP('',(#294100,#294101,#294107,#294108)); +#294100 = ORIENTED_EDGE('',*,*,#294079,.T.); +#294101 = ORIENTED_EDGE('',*,*,#294102,.T.); +#294102 = EDGE_CURVE('',#294072,#293591,#294103,.T.); +#294103 = LINE('',#294104,#294105); +#294104 = CARTESIAN_POINT('',(148.416853,-93.424443,1.545)); +#294105 = VECTOR('',#294106,1.); +#294106 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#294107 = ORIENTED_EDGE('',*,*,#293588,.F.); +#294108 = ORIENTED_EDGE('',*,*,#294109,.F.); +#294109 = EDGE_CURVE('',#294080,#293589,#294110,.T.); +#294110 = LINE('',#294111,#294112); +#294111 = CARTESIAN_POINT('',(148.416853,-93.424443,1.51)); +#294112 = VECTOR('',#294113,1.); +#294113 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#294114 = PLANE('',#294115); +#294115 = AXIS2_PLACEMENT_3D('',#294116,#294117,#294118); +#294116 = CARTESIAN_POINT('',(148.416853,-93.424443,1.51)); +#294117 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#294118 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#294119 = ADVANCED_FACE('',(#294120),#294147,.F.); +#294120 = FACE_BOUND('',#294121,.T.); +#294121 = EDGE_LOOP('',(#294122,#294132,#294139,#294140)); +#294122 = ORIENTED_EDGE('',*,*,#294123,.T.); +#294123 = EDGE_CURVE('',#294124,#294126,#294128,.T.); +#294124 = VERTEX_POINT('',#294125); +#294125 = CARTESIAN_POINT('',(147.637255,-96.5,1.51)); +#294126 = VERTEX_POINT('',#294127); +#294127 = CARTESIAN_POINT('',(147.637255,-96.5,1.545)); +#294128 = LINE('',#294129,#294130); +#294129 = CARTESIAN_POINT('',(147.637255,-96.5,1.51)); +#294130 = VECTOR('',#294131,1.); +#294131 = DIRECTION('',(0.,0.,1.)); +#294132 = ORIENTED_EDGE('',*,*,#294133,.T.); +#294133 = EDGE_CURVE('',#294126,#294126,#294134,.T.); +#294134 = CIRCLE('',#294135,0.137255); +#294135 = AXIS2_PLACEMENT_3D('',#294136,#294137,#294138); +#294136 = CARTESIAN_POINT('',(147.5,-96.5,1.545)); +#294137 = DIRECTION('',(0.,0.,1.)); +#294138 = DIRECTION('',(1.,0.,-0.)); +#294139 = ORIENTED_EDGE('',*,*,#294123,.F.); +#294140 = ORIENTED_EDGE('',*,*,#294141,.F.); +#294141 = EDGE_CURVE('',#294124,#294124,#294142,.T.); +#294142 = CIRCLE('',#294143,0.137255); +#294143 = AXIS2_PLACEMENT_3D('',#294144,#294145,#294146); +#294144 = CARTESIAN_POINT('',(147.5,-96.5,1.51)); +#294145 = DIRECTION('',(0.,0.,1.)); +#294146 = DIRECTION('',(1.,0.,-0.)); +#294147 = CYLINDRICAL_SURFACE('',#294148,0.137255); +#294148 = AXIS2_PLACEMENT_3D('',#294149,#294150,#294151); +#294149 = CARTESIAN_POINT('',(147.5,-96.5,1.51)); +#294150 = DIRECTION('',(-0.,-0.,-1.)); +#294151 = DIRECTION('',(1.,0.,-0.)); +#294152 = ADVANCED_FACE('',(#294153,#294172),#294175,.F.); +#294153 = FACE_BOUND('',#294154,.T.); +#294154 = EDGE_LOOP('',(#294155,#294156,#294157,#294158,#294159,#294160, + #294161,#294162,#294163,#294164,#294165,#294166,#294167,#294168, + #294169,#294170,#294171)); +#294155 = ORIENTED_EDGE('',*,*,#293615,.T.); +#294156 = ORIENTED_EDGE('',*,*,#293647,.T.); +#294157 = ORIENTED_EDGE('',*,*,#293678,.T.); +#294158 = ORIENTED_EDGE('',*,*,#293709,.T.); +#294159 = ORIENTED_EDGE('',*,*,#293740,.T.); +#294160 = ORIENTED_EDGE('',*,*,#293772,.T.); +#294161 = ORIENTED_EDGE('',*,*,#293804,.T.); +#294162 = ORIENTED_EDGE('',*,*,#293835,.T.); +#294163 = ORIENTED_EDGE('',*,*,#293867,.T.); +#294164 = ORIENTED_EDGE('',*,*,#293899,.T.); +#294165 = ORIENTED_EDGE('',*,*,#293930,.T.); +#294166 = ORIENTED_EDGE('',*,*,#293962,.T.); +#294167 = ORIENTED_EDGE('',*,*,#293994,.T.); +#294168 = ORIENTED_EDGE('',*,*,#294025,.T.); +#294169 = ORIENTED_EDGE('',*,*,#294056,.T.); +#294170 = ORIENTED_EDGE('',*,*,#294087,.T.); +#294171 = ORIENTED_EDGE('',*,*,#294109,.T.); +#294172 = FACE_BOUND('',#294173,.T.); +#294173 = EDGE_LOOP('',(#294174)); +#294174 = ORIENTED_EDGE('',*,*,#294141,.T.); +#294175 = PLANE('',#294176); +#294176 = AXIS2_PLACEMENT_3D('',#294177,#294178,#294179); +#294177 = CARTESIAN_POINT('',(0.,0.,1.51)); +#294178 = DIRECTION('',(0.,0.,1.)); +#294179 = DIRECTION('',(1.,0.,-0.)); +#294180 = ADVANCED_FACE('',(#294181,#294200),#294203,.T.); +#294181 = FACE_BOUND('',#294182,.F.); +#294182 = EDGE_LOOP('',(#294183,#294184,#294185,#294186,#294187,#294188, + #294189,#294190,#294191,#294192,#294193,#294194,#294195,#294196, + #294197,#294198,#294199)); +#294183 = ORIENTED_EDGE('',*,*,#293598,.T.); +#294184 = ORIENTED_EDGE('',*,*,#293631,.T.); +#294185 = ORIENTED_EDGE('',*,*,#293662,.T.); +#294186 = ORIENTED_EDGE('',*,*,#293693,.T.); +#294187 = ORIENTED_EDGE('',*,*,#293724,.T.); +#294188 = ORIENTED_EDGE('',*,*,#293755,.T.); +#294189 = ORIENTED_EDGE('',*,*,#293788,.T.); +#294190 = ORIENTED_EDGE('',*,*,#293819,.T.); +#294191 = ORIENTED_EDGE('',*,*,#293850,.T.); +#294192 = ORIENTED_EDGE('',*,*,#293883,.T.); +#294193 = ORIENTED_EDGE('',*,*,#293914,.T.); +#294194 = ORIENTED_EDGE('',*,*,#293945,.T.); +#294195 = ORIENTED_EDGE('',*,*,#293978,.T.); +#294196 = ORIENTED_EDGE('',*,*,#294009,.T.); +#294197 = ORIENTED_EDGE('',*,*,#294040,.T.); +#294198 = ORIENTED_EDGE('',*,*,#294071,.T.); +#294199 = ORIENTED_EDGE('',*,*,#294102,.T.); +#294200 = FACE_BOUND('',#294201,.F.); +#294201 = EDGE_LOOP('',(#294202)); +#294202 = ORIENTED_EDGE('',*,*,#294133,.T.); +#294203 = PLANE('',#294204); +#294204 = AXIS2_PLACEMENT_3D('',#294205,#294206,#294207); +#294205 = CARTESIAN_POINT('',(0.,0.,1.545)); +#294206 = DIRECTION('',(0.,0.,1.)); +#294207 = DIRECTION('',(1.,0.,-0.)); +#294208 = MANIFOLD_SOLID_BREP('',#294209); +#294209 = CLOSED_SHELL('',(#294210,#294250,#294283,#294314,#294347, + #294369,#294402,#294418)); +#294210 = ADVANCED_FACE('',(#294211),#294245,.T.); +#294211 = FACE_BOUND('',#294212,.T.); +#294212 = EDGE_LOOP('',(#294213,#294223,#294231,#294239)); +#294213 = ORIENTED_EDGE('',*,*,#294214,.T.); +#294214 = EDGE_CURVE('',#294215,#294217,#294219,.T.); +#294215 = VERTEX_POINT('',#294216); +#294216 = CARTESIAN_POINT('',(123.803558,-90.6,1.51)); +#294217 = VERTEX_POINT('',#294218); +#294218 = CARTESIAN_POINT('',(123.803558,-90.6,1.545)); +#294219 = LINE('',#294220,#294221); +#294220 = CARTESIAN_POINT('',(123.803558,-90.6,1.51)); +#294221 = VECTOR('',#294222,1.); +#294222 = DIRECTION('',(0.,0.,1.)); +#294223 = ORIENTED_EDGE('',*,*,#294224,.T.); +#294224 = EDGE_CURVE('',#294217,#294225,#294227,.T.); +#294225 = VERTEX_POINT('',#294226); +#294226 = CARTESIAN_POINT('',(122.630491,-90.598079,1.545)); +#294227 = LINE('',#294228,#294229); +#294228 = CARTESIAN_POINT('',(123.803558,-90.6,1.545)); +#294229 = VECTOR('',#294230,1.); +#294230 = DIRECTION('',(-0.999998659156,1.637585427119E-03,0.)); +#294231 = ORIENTED_EDGE('',*,*,#294232,.F.); +#294232 = EDGE_CURVE('',#294233,#294225,#294235,.T.); +#294233 = VERTEX_POINT('',#294234); +#294234 = CARTESIAN_POINT('',(122.630491,-90.598079,1.51)); +#294235 = LINE('',#294236,#294237); +#294236 = CARTESIAN_POINT('',(122.630491,-90.598079,1.51)); +#294237 = VECTOR('',#294238,1.); +#294238 = DIRECTION('',(0.,0.,1.)); +#294239 = ORIENTED_EDGE('',*,*,#294240,.F.); +#294240 = EDGE_CURVE('',#294215,#294233,#294241,.T.); +#294241 = LINE('',#294242,#294243); +#294242 = CARTESIAN_POINT('',(123.803558,-90.6,1.51)); +#294243 = VECTOR('',#294244,1.); +#294244 = DIRECTION('',(-0.999998659156,1.637585427119E-03,0.)); +#294245 = PLANE('',#294246); +#294246 = AXIS2_PLACEMENT_3D('',#294247,#294248,#294249); +#294247 = CARTESIAN_POINT('',(123.803558,-90.6,1.51)); +#294248 = DIRECTION('',(-1.637585427119E-03,-0.999998659156,0.)); +#294249 = DIRECTION('',(-0.999998659156,1.637585427119E-03,0.)); +#294250 = ADVANCED_FACE('',(#294251),#294278,.T.); +#294251 = FACE_BOUND('',#294252,.T.); +#294252 = EDGE_LOOP('',(#294253,#294254,#294263,#294271)); +#294253 = ORIENTED_EDGE('',*,*,#294232,.T.); +#294254 = ORIENTED_EDGE('',*,*,#294255,.T.); +#294255 = EDGE_CURVE('',#294225,#294256,#294258,.T.); +#294256 = VERTEX_POINT('',#294257); +#294257 = CARTESIAN_POINT('',(122.630491,-90.401921,1.545)); +#294258 = CIRCLE('',#294259,0.100000456609); +#294259 = AXIS2_PLACEMENT_3D('',#294260,#294261,#294262); +#294260 = CARTESIAN_POINT('',(122.65,-90.5,1.545)); +#294261 = DIRECTION('',(0.,0.,-1.)); +#294262 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#294263 = ORIENTED_EDGE('',*,*,#294264,.F.); +#294264 = EDGE_CURVE('',#294265,#294256,#294267,.T.); +#294265 = VERTEX_POINT('',#294266); +#294266 = CARTESIAN_POINT('',(122.630491,-90.401921,1.51)); +#294267 = LINE('',#294268,#294269); +#294268 = CARTESIAN_POINT('',(122.630491,-90.401921,1.51)); +#294269 = VECTOR('',#294270,1.); +#294270 = DIRECTION('',(0.,0.,1.)); +#294271 = ORIENTED_EDGE('',*,*,#294272,.F.); +#294272 = EDGE_CURVE('',#294233,#294265,#294273,.T.); +#294273 = CIRCLE('',#294274,0.100000456609); +#294274 = AXIS2_PLACEMENT_3D('',#294275,#294276,#294277); +#294275 = CARTESIAN_POINT('',(122.65,-90.5,1.51)); +#294276 = DIRECTION('',(0.,0.,-1.)); +#294277 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#294278 = CYLINDRICAL_SURFACE('',#294279,0.100000456609); +#294279 = AXIS2_PLACEMENT_3D('',#294280,#294281,#294282); +#294280 = CARTESIAN_POINT('',(122.65,-90.5,1.51)); +#294281 = DIRECTION('',(0.,0.,-1.)); +#294282 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#294283 = ADVANCED_FACE('',(#294284),#294309,.T.); +#294284 = FACE_BOUND('',#294285,.T.); +#294285 = EDGE_LOOP('',(#294286,#294287,#294295,#294303)); +#294286 = ORIENTED_EDGE('',*,*,#294264,.T.); +#294287 = ORIENTED_EDGE('',*,*,#294288,.T.); +#294288 = EDGE_CURVE('',#294256,#294289,#294291,.T.); +#294289 = VERTEX_POINT('',#294290); +#294290 = CARTESIAN_POINT('',(123.811071,-90.39843,1.545)); +#294291 = LINE('',#294292,#294293); +#294292 = CARTESIAN_POINT('',(122.630491,-90.401921,1.545)); +#294293 = VECTOR('',#294294,1.); +#294294 = DIRECTION('',(0.999995628042,2.957008197234E-03,0.)); +#294295 = ORIENTED_EDGE('',*,*,#294296,.F.); +#294296 = EDGE_CURVE('',#294297,#294289,#294299,.T.); +#294297 = VERTEX_POINT('',#294298); +#294298 = CARTESIAN_POINT('',(123.811071,-90.39843,1.51)); +#294299 = LINE('',#294300,#294301); +#294300 = CARTESIAN_POINT('',(123.811071,-90.39843,1.51)); +#294301 = VECTOR('',#294302,1.); +#294302 = DIRECTION('',(0.,0.,1.)); +#294303 = ORIENTED_EDGE('',*,*,#294304,.F.); +#294304 = EDGE_CURVE('',#294265,#294297,#294305,.T.); +#294305 = LINE('',#294306,#294307); +#294306 = CARTESIAN_POINT('',(122.630491,-90.401921,1.51)); +#294307 = VECTOR('',#294308,1.); +#294308 = DIRECTION('',(0.999995628042,2.957008197234E-03,0.)); +#294309 = PLANE('',#294310); +#294310 = AXIS2_PLACEMENT_3D('',#294311,#294312,#294313); +#294311 = CARTESIAN_POINT('',(122.630491,-90.401921,1.51)); +#294312 = DIRECTION('',(-2.957008197234E-03,0.999995628042,0.)); +#294313 = DIRECTION('',(0.999995628042,2.957008197234E-03,0.)); +#294314 = ADVANCED_FACE('',(#294315),#294342,.T.); +#294315 = FACE_BOUND('',#294316,.T.); +#294316 = EDGE_LOOP('',(#294317,#294318,#294327,#294335)); +#294317 = ORIENTED_EDGE('',*,*,#294296,.T.); +#294318 = ORIENTED_EDGE('',*,*,#294319,.T.); +#294319 = EDGE_CURVE('',#294289,#294320,#294322,.T.); +#294320 = VERTEX_POINT('',#294321); +#294321 = CARTESIAN_POINT('',(123.811071,-90.62804,1.545)); +#294322 = CIRCLE('',#294323,0.299997422619); +#294323 = AXIS2_PLACEMENT_3D('',#294324,#294325,#294326); +#294324 = CARTESIAN_POINT('',(124.08823208232,-90.513235,1.545)); +#294325 = DIRECTION('',(0.,0.,-1.)); +#294326 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#294327 = ORIENTED_EDGE('',*,*,#294328,.F.); +#294328 = EDGE_CURVE('',#294329,#294320,#294331,.T.); +#294329 = VERTEX_POINT('',#294330); +#294330 = CARTESIAN_POINT('',(123.811071,-90.62804,1.51)); +#294331 = LINE('',#294332,#294333); +#294332 = CARTESIAN_POINT('',(123.811071,-90.62804,1.51)); +#294333 = VECTOR('',#294334,1.); +#294334 = DIRECTION('',(0.,0.,1.)); +#294335 = ORIENTED_EDGE('',*,*,#294336,.F.); +#294336 = EDGE_CURVE('',#294297,#294329,#294337,.T.); +#294337 = CIRCLE('',#294338,0.299997422619); +#294338 = AXIS2_PLACEMENT_3D('',#294339,#294340,#294341); +#294339 = CARTESIAN_POINT('',(124.08823208232,-90.513235,1.51)); +#294340 = DIRECTION('',(0.,0.,-1.)); +#294341 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#294342 = CYLINDRICAL_SURFACE('',#294343,0.299997422619); +#294343 = AXIS2_PLACEMENT_3D('',#294344,#294345,#294346); +#294344 = CARTESIAN_POINT('',(124.08823208232,-90.513235,1.51)); +#294345 = DIRECTION('',(0.,0.,-1.)); +#294346 = DIRECTION('',(-0.923878211689,0.382686621098,-0.)); +#294347 = ADVANCED_FACE('',(#294348),#294364,.T.); +#294348 = FACE_BOUND('',#294349,.T.); +#294349 = EDGE_LOOP('',(#294350,#294351,#294357,#294358)); +#294350 = ORIENTED_EDGE('',*,*,#294328,.T.); +#294351 = ORIENTED_EDGE('',*,*,#294352,.T.); +#294352 = EDGE_CURVE('',#294320,#294217,#294353,.T.); +#294353 = LINE('',#294354,#294355); +#294354 = CARTESIAN_POINT('',(123.811071,-90.62804,1.545)); +#294355 = VECTOR('',#294356,1.); +#294356 = DIRECTION('',(-0.258809552168,0.965928369863,0.)); +#294357 = ORIENTED_EDGE('',*,*,#294214,.F.); +#294358 = ORIENTED_EDGE('',*,*,#294359,.F.); +#294359 = EDGE_CURVE('',#294329,#294215,#294360,.T.); +#294360 = LINE('',#294361,#294362); +#294361 = CARTESIAN_POINT('',(123.811071,-90.62804,1.51)); +#294362 = VECTOR('',#294363,1.); +#294363 = DIRECTION('',(-0.258809552168,0.965928369863,0.)); +#294364 = PLANE('',#294365); +#294365 = AXIS2_PLACEMENT_3D('',#294366,#294367,#294368); +#294366 = CARTESIAN_POINT('',(123.811071,-90.62804,1.51)); +#294367 = DIRECTION('',(-0.965928369863,-0.258809552168,0.)); +#294368 = DIRECTION('',(-0.258809552168,0.965928369863,0.)); +#294369 = ADVANCED_FACE('',(#294370),#294397,.F.); +#294370 = FACE_BOUND('',#294371,.T.); +#294371 = EDGE_LOOP('',(#294372,#294382,#294389,#294390)); +#294372 = ORIENTED_EDGE('',*,*,#294373,.T.); +#294373 = EDGE_CURVE('',#294374,#294376,#294378,.T.); +#294374 = VERTEX_POINT('',#294375); +#294375 = CARTESIAN_POINT('',(124.22549,-90.513235,1.51)); +#294376 = VERTEX_POINT('',#294377); +#294377 = CARTESIAN_POINT('',(124.22549,-90.513235,1.545)); +#294378 = LINE('',#294379,#294380); +#294379 = CARTESIAN_POINT('',(124.22549,-90.513235,1.51)); +#294380 = VECTOR('',#294381,1.); +#294381 = DIRECTION('',(0.,0.,1.)); +#294382 = ORIENTED_EDGE('',*,*,#294383,.T.); +#294383 = EDGE_CURVE('',#294376,#294376,#294384,.T.); +#294384 = CIRCLE('',#294385,0.137255); +#294385 = AXIS2_PLACEMENT_3D('',#294386,#294387,#294388); +#294386 = CARTESIAN_POINT('',(124.088235,-90.513235,1.545)); +#294387 = DIRECTION('',(0.,0.,1.)); +#294388 = DIRECTION('',(1.,0.,-0.)); +#294389 = ORIENTED_EDGE('',*,*,#294373,.F.); +#294390 = ORIENTED_EDGE('',*,*,#294391,.F.); +#294391 = EDGE_CURVE('',#294374,#294374,#294392,.T.); +#294392 = CIRCLE('',#294393,0.137255); +#294393 = AXIS2_PLACEMENT_3D('',#294394,#294395,#294396); +#294394 = CARTESIAN_POINT('',(124.088235,-90.513235,1.51)); +#294395 = DIRECTION('',(0.,0.,1.)); +#294396 = DIRECTION('',(1.,0.,-0.)); +#294397 = CYLINDRICAL_SURFACE('',#294398,0.137255); +#294398 = AXIS2_PLACEMENT_3D('',#294399,#294400,#294401); +#294399 = CARTESIAN_POINT('',(124.088235,-90.513235,1.51)); +#294400 = DIRECTION('',(-0.,-0.,-1.)); +#294401 = DIRECTION('',(1.,0.,-0.)); +#294402 = ADVANCED_FACE('',(#294403,#294410),#294413,.F.); +#294403 = FACE_BOUND('',#294404,.T.); +#294404 = EDGE_LOOP('',(#294405,#294406,#294407,#294408,#294409)); +#294405 = ORIENTED_EDGE('',*,*,#294240,.T.); +#294406 = ORIENTED_EDGE('',*,*,#294272,.T.); +#294407 = ORIENTED_EDGE('',*,*,#294304,.T.); +#294408 = ORIENTED_EDGE('',*,*,#294336,.T.); +#294409 = ORIENTED_EDGE('',*,*,#294359,.T.); +#294410 = FACE_BOUND('',#294411,.T.); +#294411 = EDGE_LOOP('',(#294412)); +#294412 = ORIENTED_EDGE('',*,*,#294391,.T.); +#294413 = PLANE('',#294414); +#294414 = AXIS2_PLACEMENT_3D('',#294415,#294416,#294417); +#294415 = CARTESIAN_POINT('',(0.,0.,1.51)); +#294416 = DIRECTION('',(0.,0.,1.)); +#294417 = DIRECTION('',(1.,0.,-0.)); +#294418 = ADVANCED_FACE('',(#294419,#294426),#294429,.T.); +#294419 = FACE_BOUND('',#294420,.F.); +#294420 = EDGE_LOOP('',(#294421,#294422,#294423,#294424,#294425)); +#294421 = ORIENTED_EDGE('',*,*,#294224,.T.); +#294422 = ORIENTED_EDGE('',*,*,#294255,.T.); +#294423 = ORIENTED_EDGE('',*,*,#294288,.T.); +#294424 = ORIENTED_EDGE('',*,*,#294319,.T.); +#294425 = ORIENTED_EDGE('',*,*,#294352,.T.); +#294426 = FACE_BOUND('',#294427,.F.); +#294427 = EDGE_LOOP('',(#294428)); +#294428 = ORIENTED_EDGE('',*,*,#294383,.T.); +#294429 = PLANE('',#294430); +#294430 = AXIS2_PLACEMENT_3D('',#294431,#294432,#294433); +#294431 = CARTESIAN_POINT('',(0.,0.,1.545)); +#294432 = DIRECTION('',(0.,0.,1.)); +#294433 = DIRECTION('',(1.,0.,-0.)); +#294434 = MANIFOLD_SOLID_BREP('',#294435); +#294435 = CLOSED_SHELL('',(#294436,#294476,#294509,#294540,#294571, + #294604,#294626,#294659,#294676)); +#294436 = ADVANCED_FACE('',(#294437),#294471,.T.); +#294437 = FACE_BOUND('',#294438,.T.); +#294438 = EDGE_LOOP('',(#294439,#294449,#294457,#294465)); +#294439 = ORIENTED_EDGE('',*,*,#294440,.T.); +#294440 = EDGE_CURVE('',#294441,#294443,#294445,.T.); +#294441 = VERTEX_POINT('',#294442); +#294442 = CARTESIAN_POINT('',(150.781131,-90.4,1.51)); +#294443 = VERTEX_POINT('',#294444); +#294444 = CARTESIAN_POINT('',(150.781131,-90.4,1.545)); +#294445 = LINE('',#294446,#294447); +#294446 = CARTESIAN_POINT('',(150.781131,-90.4,1.51)); +#294447 = VECTOR('',#294448,1.); +#294448 = DIRECTION('',(0.,0.,1.)); +#294449 = ORIENTED_EDGE('',*,*,#294450,.T.); +#294450 = EDGE_CURVE('',#294443,#294451,#294453,.T.); +#294451 = VERTEX_POINT('',#294452); +#294452 = CARTESIAN_POINT('',(152.319509,-90.401921,1.545)); +#294453 = LINE('',#294454,#294455); +#294454 = CARTESIAN_POINT('',(150.781131,-90.4,1.545)); +#294455 = VECTOR('',#294456,1.); +#294456 = DIRECTION('',(0.999999220353,-1.248716831815E-03,0.)); +#294457 = ORIENTED_EDGE('',*,*,#294458,.F.); +#294458 = EDGE_CURVE('',#294459,#294451,#294461,.T.); +#294459 = VERTEX_POINT('',#294460); +#294460 = CARTESIAN_POINT('',(152.319509,-90.401921,1.51)); +#294461 = LINE('',#294462,#294463); +#294462 = CARTESIAN_POINT('',(152.319509,-90.401921,1.51)); +#294463 = VECTOR('',#294464,1.); +#294464 = DIRECTION('',(0.,0.,1.)); +#294465 = ORIENTED_EDGE('',*,*,#294466,.F.); +#294466 = EDGE_CURVE('',#294441,#294459,#294467,.T.); +#294467 = LINE('',#294468,#294469); +#294468 = CARTESIAN_POINT('',(150.781131,-90.4,1.51)); +#294469 = VECTOR('',#294470,1.); +#294470 = DIRECTION('',(0.999999220353,-1.248716831815E-03,0.)); +#294471 = PLANE('',#294472); +#294472 = AXIS2_PLACEMENT_3D('',#294473,#294474,#294475); +#294473 = CARTESIAN_POINT('',(150.781131,-90.4,1.51)); +#294474 = DIRECTION('',(1.248716831815E-03,0.999999220353,-0.)); +#294475 = DIRECTION('',(0.999999220353,-1.248716831815E-03,0.)); +#294476 = ADVANCED_FACE('',(#294477),#294504,.T.); +#294477 = FACE_BOUND('',#294478,.T.); +#294478 = EDGE_LOOP('',(#294479,#294480,#294489,#294497)); +#294479 = ORIENTED_EDGE('',*,*,#294458,.T.); +#294480 = ORIENTED_EDGE('',*,*,#294481,.T.); +#294481 = EDGE_CURVE('',#294451,#294482,#294484,.T.); +#294482 = VERTEX_POINT('',#294483); +#294483 = CARTESIAN_POINT('',(152.319509,-90.598079,1.545)); +#294484 = CIRCLE('',#294485,0.100000456609); +#294485 = AXIS2_PLACEMENT_3D('',#294486,#294487,#294488); +#294486 = CARTESIAN_POINT('',(152.3,-90.5,1.545)); +#294487 = DIRECTION('',(0.,0.,-1.)); +#294488 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#294489 = ORIENTED_EDGE('',*,*,#294490,.F.); +#294490 = EDGE_CURVE('',#294491,#294482,#294493,.T.); +#294491 = VERTEX_POINT('',#294492); +#294492 = CARTESIAN_POINT('',(152.319509,-90.598079,1.51)); +#294493 = LINE('',#294494,#294495); +#294494 = CARTESIAN_POINT('',(152.319509,-90.598079,1.51)); +#294495 = VECTOR('',#294496,1.); +#294496 = DIRECTION('',(0.,0.,1.)); +#294497 = ORIENTED_EDGE('',*,*,#294498,.F.); +#294498 = EDGE_CURVE('',#294459,#294491,#294499,.T.); +#294499 = CIRCLE('',#294500,0.100000456609); +#294500 = AXIS2_PLACEMENT_3D('',#294501,#294502,#294503); +#294501 = CARTESIAN_POINT('',(152.3,-90.5,1.51)); +#294502 = DIRECTION('',(0.,0.,-1.)); +#294503 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#294504 = CYLINDRICAL_SURFACE('',#294505,0.100000456609); +#294505 = AXIS2_PLACEMENT_3D('',#294506,#294507,#294508); +#294506 = CARTESIAN_POINT('',(152.3,-90.5,1.51)); +#294507 = DIRECTION('',(0.,0.,-1.)); +#294508 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#294509 = ADVANCED_FACE('',(#294510),#294535,.T.); +#294510 = FACE_BOUND('',#294511,.T.); +#294511 = EDGE_LOOP('',(#294512,#294513,#294521,#294529)); +#294512 = ORIENTED_EDGE('',*,*,#294490,.T.); +#294513 = ORIENTED_EDGE('',*,*,#294514,.T.); +#294514 = EDGE_CURVE('',#294482,#294515,#294517,.T.); +#294515 = VERTEX_POINT('',#294516); +#294516 = CARTESIAN_POINT('',(150.781131,-90.6,1.545)); +#294517 = LINE('',#294518,#294519); +#294518 = CARTESIAN_POINT('',(152.319509,-90.598079,1.545)); +#294519 = VECTOR('',#294520,1.); +#294520 = DIRECTION('',(-0.999999220353,-1.248716831815E-03,0.)); +#294521 = ORIENTED_EDGE('',*,*,#294522,.F.); +#294522 = EDGE_CURVE('',#294523,#294515,#294525,.T.); +#294523 = VERTEX_POINT('',#294524); +#294524 = CARTESIAN_POINT('',(150.781131,-90.6,1.51)); +#294525 = LINE('',#294526,#294527); +#294526 = CARTESIAN_POINT('',(150.781131,-90.6,1.51)); +#294527 = VECTOR('',#294528,1.); +#294528 = DIRECTION('',(0.,0.,1.)); +#294529 = ORIENTED_EDGE('',*,*,#294530,.F.); +#294530 = EDGE_CURVE('',#294491,#294523,#294531,.T.); +#294531 = LINE('',#294532,#294533); +#294532 = CARTESIAN_POINT('',(152.319509,-90.598079,1.51)); +#294533 = VECTOR('',#294534,1.); +#294534 = DIRECTION('',(-0.999999220353,-1.248716831815E-03,0.)); +#294535 = PLANE('',#294536); +#294536 = AXIS2_PLACEMENT_3D('',#294537,#294538,#294539); +#294537 = CARTESIAN_POINT('',(152.319509,-90.598079,1.51)); +#294538 = DIRECTION('',(1.248716831815E-03,-0.999999220353,0.)); +#294539 = DIRECTION('',(-0.999999220353,-1.248716831815E-03,0.)); +#294540 = ADVANCED_FACE('',(#294541),#294566,.T.); +#294541 = FACE_BOUND('',#294542,.T.); +#294542 = EDGE_LOOP('',(#294543,#294544,#294552,#294560)); +#294543 = ORIENTED_EDGE('',*,*,#294522,.T.); +#294544 = ORIENTED_EDGE('',*,*,#294545,.T.); +#294545 = EDGE_CURVE('',#294515,#294546,#294548,.T.); +#294546 = VERTEX_POINT('',#294547); +#294547 = CARTESIAN_POINT('',(150.777164,-90.614805,1.545)); +#294548 = LINE('',#294549,#294550); +#294549 = CARTESIAN_POINT('',(150.781131,-90.6,1.545)); +#294550 = VECTOR('',#294551,1.); +#294551 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#294552 = ORIENTED_EDGE('',*,*,#294553,.F.); +#294553 = EDGE_CURVE('',#294554,#294546,#294556,.T.); +#294554 = VERTEX_POINT('',#294555); +#294555 = CARTESIAN_POINT('',(150.777164,-90.614805,1.51)); +#294556 = LINE('',#294557,#294558); +#294557 = CARTESIAN_POINT('',(150.777164,-90.614805,1.51)); +#294558 = VECTOR('',#294559,1.); +#294559 = DIRECTION('',(0.,0.,1.)); +#294560 = ORIENTED_EDGE('',*,*,#294561,.F.); +#294561 = EDGE_CURVE('',#294523,#294554,#294562,.T.); +#294562 = LINE('',#294563,#294564); +#294563 = CARTESIAN_POINT('',(150.781131,-90.6,1.51)); +#294564 = VECTOR('',#294565,1.); +#294565 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#294566 = PLANE('',#294567); +#294567 = AXIS2_PLACEMENT_3D('',#294568,#294569,#294570); +#294568 = CARTESIAN_POINT('',(150.781131,-90.6,1.51)); +#294569 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#294570 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#294571 = ADVANCED_FACE('',(#294572),#294599,.T.); +#294572 = FACE_BOUND('',#294573,.T.); +#294573 = EDGE_LOOP('',(#294574,#294575,#294584,#294592)); +#294574 = ORIENTED_EDGE('',*,*,#294553,.T.); +#294575 = ORIENTED_EDGE('',*,*,#294576,.T.); +#294576 = EDGE_CURVE('',#294546,#294577,#294579,.T.); +#294577 = VERTEX_POINT('',#294578); +#294578 = CARTESIAN_POINT('',(150.777164,-90.385195,1.545)); +#294579 = CIRCLE('',#294580,0.299999888633); +#294580 = AXIS2_PLACEMENT_3D('',#294581,#294582,#294583); +#294581 = CARTESIAN_POINT('',(150.50000024848,-90.5,1.545)); +#294582 = DIRECTION('',(-0.,0.,-1.)); +#294583 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#294584 = ORIENTED_EDGE('',*,*,#294585,.F.); +#294585 = EDGE_CURVE('',#294586,#294577,#294588,.T.); +#294586 = VERTEX_POINT('',#294587); +#294587 = CARTESIAN_POINT('',(150.777164,-90.385195,1.51)); +#294588 = LINE('',#294589,#294590); +#294589 = CARTESIAN_POINT('',(150.777164,-90.385195,1.51)); +#294590 = VECTOR('',#294591,1.); +#294591 = DIRECTION('',(0.,0.,1.)); +#294592 = ORIENTED_EDGE('',*,*,#294593,.F.); +#294593 = EDGE_CURVE('',#294554,#294586,#294594,.T.); +#294594 = CIRCLE('',#294595,0.299999888633); +#294595 = AXIS2_PLACEMENT_3D('',#294596,#294597,#294598); +#294596 = CARTESIAN_POINT('',(150.50000024848,-90.5,1.51)); +#294597 = DIRECTION('',(-0.,0.,-1.)); +#294598 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#294599 = CYLINDRICAL_SURFACE('',#294600,0.299999888633); +#294600 = AXIS2_PLACEMENT_3D('',#294601,#294602,#294603); +#294601 = CARTESIAN_POINT('',(150.50000024848,-90.5,1.51)); +#294602 = DIRECTION('',(-0.,0.,-1.)); +#294603 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#294604 = ADVANCED_FACE('',(#294605),#294621,.T.); +#294605 = FACE_BOUND('',#294606,.T.); +#294606 = EDGE_LOOP('',(#294607,#294608,#294614,#294615)); +#294607 = ORIENTED_EDGE('',*,*,#294585,.T.); +#294608 = ORIENTED_EDGE('',*,*,#294609,.T.); +#294609 = EDGE_CURVE('',#294577,#294443,#294610,.T.); +#294610 = LINE('',#294611,#294612); +#294611 = CARTESIAN_POINT('',(150.777164,-90.385195,1.545)); +#294612 = VECTOR('',#294613,1.); +#294613 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#294614 = ORIENTED_EDGE('',*,*,#294440,.F.); +#294615 = ORIENTED_EDGE('',*,*,#294616,.F.); +#294616 = EDGE_CURVE('',#294586,#294441,#294617,.T.); +#294617 = LINE('',#294618,#294619); +#294618 = CARTESIAN_POINT('',(150.777164,-90.385195,1.51)); +#294619 = VECTOR('',#294620,1.); +#294620 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#294621 = PLANE('',#294622); +#294622 = AXIS2_PLACEMENT_3D('',#294623,#294624,#294625); +#294623 = CARTESIAN_POINT('',(150.777164,-90.385195,1.51)); +#294624 = DIRECTION('',(0.965925627198,0.258819788118,-0.)); +#294625 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#294626 = ADVANCED_FACE('',(#294627),#294654,.F.); +#294627 = FACE_BOUND('',#294628,.T.); +#294628 = EDGE_LOOP('',(#294629,#294639,#294646,#294647)); +#294629 = ORIENTED_EDGE('',*,*,#294630,.T.); +#294630 = EDGE_CURVE('',#294631,#294633,#294635,.T.); +#294631 = VERTEX_POINT('',#294632); +#294632 = CARTESIAN_POINT('',(150.637255,-90.5,1.51)); +#294633 = VERTEX_POINT('',#294634); +#294634 = CARTESIAN_POINT('',(150.637255,-90.5,1.545)); +#294635 = LINE('',#294636,#294637); +#294636 = CARTESIAN_POINT('',(150.637255,-90.5,1.51)); +#294637 = VECTOR('',#294638,1.); +#294638 = DIRECTION('',(0.,0.,1.)); +#294639 = ORIENTED_EDGE('',*,*,#294640,.T.); +#294640 = EDGE_CURVE('',#294633,#294633,#294641,.T.); +#294641 = CIRCLE('',#294642,0.137255); +#294642 = AXIS2_PLACEMENT_3D('',#294643,#294644,#294645); +#294643 = CARTESIAN_POINT('',(150.5,-90.5,1.545)); +#294644 = DIRECTION('',(0.,0.,1.)); +#294645 = DIRECTION('',(1.,0.,-0.)); +#294646 = ORIENTED_EDGE('',*,*,#294630,.F.); +#294647 = ORIENTED_EDGE('',*,*,#294648,.F.); +#294648 = EDGE_CURVE('',#294631,#294631,#294649,.T.); +#294649 = CIRCLE('',#294650,0.137255); +#294650 = AXIS2_PLACEMENT_3D('',#294651,#294652,#294653); +#294651 = CARTESIAN_POINT('',(150.5,-90.5,1.51)); +#294652 = DIRECTION('',(0.,0.,1.)); +#294653 = DIRECTION('',(1.,0.,-0.)); +#294654 = CYLINDRICAL_SURFACE('',#294655,0.137255); +#294655 = AXIS2_PLACEMENT_3D('',#294656,#294657,#294658); +#294656 = CARTESIAN_POINT('',(150.5,-90.5,1.51)); +#294657 = DIRECTION('',(-0.,-0.,-1.)); +#294658 = DIRECTION('',(1.,0.,-0.)); +#294659 = ADVANCED_FACE('',(#294660,#294668),#294671,.F.); +#294660 = FACE_BOUND('',#294661,.T.); +#294661 = EDGE_LOOP('',(#294662,#294663,#294664,#294665,#294666,#294667) + ); +#294662 = ORIENTED_EDGE('',*,*,#294466,.T.); +#294663 = ORIENTED_EDGE('',*,*,#294498,.T.); +#294664 = ORIENTED_EDGE('',*,*,#294530,.T.); +#294665 = ORIENTED_EDGE('',*,*,#294561,.T.); +#294666 = ORIENTED_EDGE('',*,*,#294593,.T.); +#294667 = ORIENTED_EDGE('',*,*,#294616,.T.); +#294668 = FACE_BOUND('',#294669,.T.); +#294669 = EDGE_LOOP('',(#294670)); +#294670 = ORIENTED_EDGE('',*,*,#294648,.T.); +#294671 = PLANE('',#294672); +#294672 = AXIS2_PLACEMENT_3D('',#294673,#294674,#294675); +#294673 = CARTESIAN_POINT('',(0.,0.,1.51)); +#294674 = DIRECTION('',(0.,0.,1.)); +#294675 = DIRECTION('',(1.,0.,-0.)); +#294676 = ADVANCED_FACE('',(#294677,#294685),#294688,.T.); +#294677 = FACE_BOUND('',#294678,.F.); +#294678 = EDGE_LOOP('',(#294679,#294680,#294681,#294682,#294683,#294684) + ); +#294679 = ORIENTED_EDGE('',*,*,#294450,.T.); +#294680 = ORIENTED_EDGE('',*,*,#294481,.T.); +#294681 = ORIENTED_EDGE('',*,*,#294514,.T.); +#294682 = ORIENTED_EDGE('',*,*,#294545,.T.); +#294683 = ORIENTED_EDGE('',*,*,#294576,.T.); +#294684 = ORIENTED_EDGE('',*,*,#294609,.T.); +#294685 = FACE_BOUND('',#294686,.F.); +#294686 = EDGE_LOOP('',(#294687)); +#294687 = ORIENTED_EDGE('',*,*,#294640,.T.); +#294688 = PLANE('',#294689); +#294689 = AXIS2_PLACEMENT_3D('',#294690,#294691,#294692); +#294690 = CARTESIAN_POINT('',(0.,0.,1.545)); +#294691 = DIRECTION('',(0.,0.,1.)); +#294692 = DIRECTION('',(1.,0.,-0.)); +#294693 = MANIFOLD_SOLID_BREP('',#294694); +#294694 = CLOSED_SHELL('',(#294695,#294735,#294766,#294797,#294828, + #294859,#294890,#294921,#294952,#294983,#295014,#295047,#295078, + #295109,#295140,#295171,#295202,#295233,#295264,#295295,#295328, + #295350,#295383,#295415)); +#294695 = ADVANCED_FACE('',(#294696),#294730,.T.); +#294696 = FACE_BOUND('',#294697,.T.); +#294697 = EDGE_LOOP('',(#294698,#294708,#294716,#294724)); +#294698 = ORIENTED_EDGE('',*,*,#294699,.T.); +#294699 = EDGE_CURVE('',#294700,#294702,#294704,.T.); +#294700 = VERTEX_POINT('',#294701); +#294701 = CARTESIAN_POINT('',(125.843147,-82.904443,1.51)); +#294702 = VERTEX_POINT('',#294703); +#294703 = CARTESIAN_POINT('',(125.843147,-82.904443,1.545)); +#294704 = LINE('',#294705,#294706); +#294705 = CARTESIAN_POINT('',(125.843147,-82.904443,1.51)); +#294706 = VECTOR('',#294707,1.); +#294707 = DIRECTION('',(0.,0.,1.)); +#294708 = ORIENTED_EDGE('',*,*,#294709,.T.); +#294709 = EDGE_CURVE('',#294702,#294710,#294712,.T.); +#294710 = VERTEX_POINT('',#294711); +#294711 = CARTESIAN_POINT('',(125.858079,-82.940491,1.545)); +#294712 = LINE('',#294713,#294714); +#294713 = CARTESIAN_POINT('',(125.843147,-82.904443,1.545)); +#294714 = VECTOR('',#294715,1.); +#294715 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#294716 = ORIENTED_EDGE('',*,*,#294717,.F.); +#294717 = EDGE_CURVE('',#294718,#294710,#294720,.T.); +#294718 = VERTEX_POINT('',#294719); +#294719 = CARTESIAN_POINT('',(125.858079,-82.940491,1.51)); +#294720 = LINE('',#294721,#294722); +#294721 = CARTESIAN_POINT('',(125.858079,-82.940491,1.51)); +#294722 = VECTOR('',#294723,1.); +#294723 = DIRECTION('',(0.,0.,1.)); +#294724 = ORIENTED_EDGE('',*,*,#294725,.F.); +#294725 = EDGE_CURVE('',#294700,#294718,#294726,.T.); +#294726 = LINE('',#294727,#294728); +#294727 = CARTESIAN_POINT('',(125.843147,-82.904443,1.51)); +#294728 = VECTOR('',#294729,1.); +#294729 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#294730 = PLANE('',#294731); +#294731 = AXIS2_PLACEMENT_3D('',#294732,#294733,#294734); +#294732 = CARTESIAN_POINT('',(125.843147,-82.904443,1.51)); +#294733 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#294734 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#294735 = ADVANCED_FACE('',(#294736),#294761,.T.); +#294736 = FACE_BOUND('',#294737,.T.); +#294737 = EDGE_LOOP('',(#294738,#294739,#294747,#294755)); +#294738 = ORIENTED_EDGE('',*,*,#294717,.T.); +#294739 = ORIENTED_EDGE('',*,*,#294740,.T.); +#294740 = EDGE_CURVE('',#294710,#294741,#294743,.T.); +#294741 = VERTEX_POINT('',#294742); +#294742 = CARTESIAN_POINT('',(125.86,-86.218578,1.545)); +#294743 = LINE('',#294744,#294745); +#294744 = CARTESIAN_POINT('',(125.858079,-82.940491,1.545)); +#294745 = VECTOR('',#294746,1.); +#294746 = DIRECTION('',(5.860124121629E-04,-0.999999828295,0.)); +#294747 = ORIENTED_EDGE('',*,*,#294748,.F.); +#294748 = EDGE_CURVE('',#294749,#294741,#294751,.T.); +#294749 = VERTEX_POINT('',#294750); +#294750 = CARTESIAN_POINT('',(125.86,-86.218578,1.51)); +#294751 = LINE('',#294752,#294753); +#294752 = CARTESIAN_POINT('',(125.86,-86.218578,1.51)); +#294753 = VECTOR('',#294754,1.); +#294754 = DIRECTION('',(0.,0.,1.)); +#294755 = ORIENTED_EDGE('',*,*,#294756,.F.); +#294756 = EDGE_CURVE('',#294718,#294749,#294757,.T.); +#294757 = LINE('',#294758,#294759); +#294758 = CARTESIAN_POINT('',(125.858079,-82.940491,1.51)); +#294759 = VECTOR('',#294760,1.); +#294760 = DIRECTION('',(5.860124121629E-04,-0.999999828295,0.)); +#294761 = PLANE('',#294762); +#294762 = AXIS2_PLACEMENT_3D('',#294763,#294764,#294765); +#294763 = CARTESIAN_POINT('',(125.858079,-82.940491,1.51)); +#294764 = DIRECTION('',(0.999999828295,5.860124121629E-04,-0.)); +#294765 = DIRECTION('',(5.860124121629E-04,-0.999999828295,0.)); +#294766 = ADVANCED_FACE('',(#294767),#294792,.T.); +#294767 = FACE_BOUND('',#294768,.T.); +#294768 = EDGE_LOOP('',(#294769,#294770,#294778,#294786)); +#294769 = ORIENTED_EDGE('',*,*,#294748,.T.); +#294770 = ORIENTED_EDGE('',*,*,#294771,.T.); +#294771 = EDGE_CURVE('',#294741,#294772,#294774,.T.); +#294772 = VERTEX_POINT('',#294773); +#294773 = CARTESIAN_POINT('',(125.883148,-86.244443,1.545)); +#294774 = LINE('',#294775,#294776); +#294775 = CARTESIAN_POINT('',(125.86,-86.218578,1.545)); +#294776 = VECTOR('',#294777,1.); +#294777 = DIRECTION('',(0.666884962206,-0.745160685479,0.)); +#294778 = ORIENTED_EDGE('',*,*,#294779,.F.); +#294779 = EDGE_CURVE('',#294780,#294772,#294782,.T.); +#294780 = VERTEX_POINT('',#294781); +#294781 = CARTESIAN_POINT('',(125.883148,-86.244443,1.51)); +#294782 = LINE('',#294783,#294784); +#294783 = CARTESIAN_POINT('',(125.883148,-86.244443,1.51)); +#294784 = VECTOR('',#294785,1.); +#294785 = DIRECTION('',(0.,0.,1.)); +#294786 = ORIENTED_EDGE('',*,*,#294787,.F.); +#294787 = EDGE_CURVE('',#294749,#294780,#294788,.T.); +#294788 = LINE('',#294789,#294790); +#294789 = CARTESIAN_POINT('',(125.86,-86.218578,1.51)); +#294790 = VECTOR('',#294791,1.); +#294791 = DIRECTION('',(0.666884962206,-0.745160685479,0.)); +#294792 = PLANE('',#294793); +#294793 = AXIS2_PLACEMENT_3D('',#294794,#294795,#294796); +#294794 = CARTESIAN_POINT('',(125.86,-86.218578,1.51)); +#294795 = DIRECTION('',(0.745160685479,0.666884962206,-0.)); +#294796 = DIRECTION('',(0.666884962206,-0.745160685479,0.)); +#294797 = ADVANCED_FACE('',(#294798),#294823,.T.); +#294798 = FACE_BOUND('',#294799,.T.); +#294799 = EDGE_LOOP('',(#294800,#294801,#294809,#294817)); +#294800 = ORIENTED_EDGE('',*,*,#294779,.T.); +#294801 = ORIENTED_EDGE('',*,*,#294802,.T.); +#294802 = EDGE_CURVE('',#294772,#294803,#294805,.T.); +#294803 = VERTEX_POINT('',#294804); +#294804 = CARTESIAN_POINT('',(125.898079,-86.280491,1.545)); +#294805 = LINE('',#294806,#294807); +#294806 = CARTESIAN_POINT('',(125.883148,-86.244443,1.545)); +#294807 = VECTOR('',#294808,1.); +#294808 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#294809 = ORIENTED_EDGE('',*,*,#294810,.F.); +#294810 = EDGE_CURVE('',#294811,#294803,#294813,.T.); +#294811 = VERTEX_POINT('',#294812); +#294812 = CARTESIAN_POINT('',(125.898079,-86.280491,1.51)); +#294813 = LINE('',#294814,#294815); +#294814 = CARTESIAN_POINT('',(125.898079,-86.280491,1.51)); +#294815 = VECTOR('',#294816,1.); +#294816 = DIRECTION('',(0.,0.,1.)); +#294817 = ORIENTED_EDGE('',*,*,#294818,.F.); +#294818 = EDGE_CURVE('',#294780,#294811,#294819,.T.); +#294819 = LINE('',#294820,#294821); +#294820 = CARTESIAN_POINT('',(125.883148,-86.244443,1.51)); +#294821 = VECTOR('',#294822,1.); +#294822 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#294823 = PLANE('',#294824); +#294824 = AXIS2_PLACEMENT_3D('',#294825,#294826,#294827); +#294825 = CARTESIAN_POINT('',(125.883148,-86.244443,1.51)); +#294826 = DIRECTION('',(0.923884701879,0.382670952168,-0.)); +#294827 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#294828 = ADVANCED_FACE('',(#294829),#294854,.T.); +#294829 = FACE_BOUND('',#294830,.T.); +#294830 = EDGE_LOOP('',(#294831,#294832,#294840,#294848)); +#294831 = ORIENTED_EDGE('',*,*,#294810,.T.); +#294832 = ORIENTED_EDGE('',*,*,#294833,.T.); +#294833 = EDGE_CURVE('',#294803,#294834,#294836,.T.); +#294834 = VERTEX_POINT('',#294835); +#294835 = CARTESIAN_POINT('',(125.898079,-87.599509,1.545)); +#294836 = LINE('',#294837,#294838); +#294837 = CARTESIAN_POINT('',(125.898079,-86.280491,1.545)); +#294838 = VECTOR('',#294839,1.); +#294839 = DIRECTION('',(0.,-1.,0.)); +#294840 = ORIENTED_EDGE('',*,*,#294841,.F.); +#294841 = EDGE_CURVE('',#294842,#294834,#294844,.T.); +#294842 = VERTEX_POINT('',#294843); +#294843 = CARTESIAN_POINT('',(125.898079,-87.599509,1.51)); +#294844 = LINE('',#294845,#294846); +#294845 = CARTESIAN_POINT('',(125.898079,-87.599509,1.51)); +#294846 = VECTOR('',#294847,1.); +#294847 = DIRECTION('',(0.,0.,1.)); +#294848 = ORIENTED_EDGE('',*,*,#294849,.F.); +#294849 = EDGE_CURVE('',#294811,#294842,#294850,.T.); +#294850 = LINE('',#294851,#294852); +#294851 = CARTESIAN_POINT('',(125.898079,-86.280491,1.51)); +#294852 = VECTOR('',#294853,1.); +#294853 = DIRECTION('',(0.,-1.,0.)); +#294854 = PLANE('',#294855); +#294855 = AXIS2_PLACEMENT_3D('',#294856,#294857,#294858); +#294856 = CARTESIAN_POINT('',(125.898079,-86.280491,1.51)); +#294857 = DIRECTION('',(1.,0.,-0.)); +#294858 = DIRECTION('',(0.,-1.,0.)); +#294859 = ADVANCED_FACE('',(#294860),#294885,.T.); +#294860 = FACE_BOUND('',#294861,.T.); +#294861 = EDGE_LOOP('',(#294862,#294863,#294871,#294879)); +#294862 = ORIENTED_EDGE('',*,*,#294841,.T.); +#294863 = ORIENTED_EDGE('',*,*,#294864,.T.); +#294864 = EDGE_CURVE('',#294834,#294865,#294867,.T.); +#294865 = VERTEX_POINT('',#294866); +#294866 = CARTESIAN_POINT('',(125.883147,-87.635558,1.545)); +#294867 = LINE('',#294868,#294869); +#294868 = CARTESIAN_POINT('',(125.898079,-87.599509,1.545)); +#294869 = VECTOR('',#294870,1.); +#294870 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#294871 = ORIENTED_EDGE('',*,*,#294872,.F.); +#294872 = EDGE_CURVE('',#294873,#294865,#294875,.T.); +#294873 = VERTEX_POINT('',#294874); +#294874 = CARTESIAN_POINT('',(125.883147,-87.635558,1.51)); +#294875 = LINE('',#294876,#294877); +#294876 = CARTESIAN_POINT('',(125.883147,-87.635558,1.51)); +#294877 = VECTOR('',#294878,1.); +#294878 = DIRECTION('',(0.,0.,1.)); +#294879 = ORIENTED_EDGE('',*,*,#294880,.F.); +#294880 = EDGE_CURVE('',#294842,#294873,#294881,.T.); +#294881 = LINE('',#294882,#294883); +#294882 = CARTESIAN_POINT('',(125.898079,-87.599509,1.51)); +#294883 = VECTOR('',#294884,1.); +#294884 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#294885 = PLANE('',#294886); +#294886 = AXIS2_PLACEMENT_3D('',#294887,#294888,#294889); +#294887 = CARTESIAN_POINT('',(125.898079,-87.599509,1.51)); +#294888 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#294889 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#294890 = ADVANCED_FACE('',(#294891),#294916,.T.); +#294891 = FACE_BOUND('',#294892,.T.); +#294892 = EDGE_LOOP('',(#294893,#294894,#294902,#294910)); +#294893 = ORIENTED_EDGE('',*,*,#294872,.T.); +#294894 = ORIENTED_EDGE('',*,*,#294895,.T.); +#294895 = EDGE_CURVE('',#294865,#294896,#294898,.T.); +#294896 = VERTEX_POINT('',#294897); +#294897 = CARTESIAN_POINT('',(125.535557,-87.983147,1.545)); +#294898 = LINE('',#294899,#294900); +#294899 = CARTESIAN_POINT('',(125.883147,-87.635558,1.545)); +#294900 = VECTOR('',#294901,1.); +#294901 = DIRECTION('',(-0.707107798344,-0.707105764028,0.)); +#294902 = ORIENTED_EDGE('',*,*,#294903,.F.); +#294903 = EDGE_CURVE('',#294904,#294896,#294906,.T.); +#294904 = VERTEX_POINT('',#294905); +#294905 = CARTESIAN_POINT('',(125.535557,-87.983147,1.51)); +#294906 = LINE('',#294907,#294908); +#294907 = CARTESIAN_POINT('',(125.535557,-87.983147,1.51)); +#294908 = VECTOR('',#294909,1.); +#294909 = DIRECTION('',(0.,0.,1.)); +#294910 = ORIENTED_EDGE('',*,*,#294911,.F.); +#294911 = EDGE_CURVE('',#294873,#294904,#294912,.T.); +#294912 = LINE('',#294913,#294914); +#294913 = CARTESIAN_POINT('',(125.883147,-87.635558,1.51)); +#294914 = VECTOR('',#294915,1.); +#294915 = DIRECTION('',(-0.707107798344,-0.707105764028,0.)); +#294916 = PLANE('',#294917); +#294917 = AXIS2_PLACEMENT_3D('',#294918,#294919,#294920); +#294918 = CARTESIAN_POINT('',(125.883147,-87.635558,1.51)); +#294919 = DIRECTION('',(0.707105764028,-0.707107798344,0.)); +#294920 = DIRECTION('',(-0.707107798344,-0.707105764028,0.)); +#294921 = ADVANCED_FACE('',(#294922),#294947,.T.); +#294922 = FACE_BOUND('',#294923,.T.); +#294923 = EDGE_LOOP('',(#294924,#294925,#294933,#294941)); +#294924 = ORIENTED_EDGE('',*,*,#294903,.T.); +#294925 = ORIENTED_EDGE('',*,*,#294926,.T.); +#294926 = EDGE_CURVE('',#294896,#294927,#294929,.T.); +#294927 = VERTEX_POINT('',#294928); +#294928 = CARTESIAN_POINT('',(125.499509,-87.998079,1.545)); +#294929 = LINE('',#294930,#294931); +#294930 = CARTESIAN_POINT('',(125.535557,-87.983147,1.545)); +#294931 = VECTOR('',#294932,1.); +#294932 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#294933 = ORIENTED_EDGE('',*,*,#294934,.F.); +#294934 = EDGE_CURVE('',#294935,#294927,#294937,.T.); +#294935 = VERTEX_POINT('',#294936); +#294936 = CARTESIAN_POINT('',(125.499509,-87.998079,1.51)); +#294937 = LINE('',#294938,#294939); +#294938 = CARTESIAN_POINT('',(125.499509,-87.998079,1.51)); +#294939 = VECTOR('',#294940,1.); +#294940 = DIRECTION('',(0.,0.,1.)); +#294941 = ORIENTED_EDGE('',*,*,#294942,.F.); +#294942 = EDGE_CURVE('',#294904,#294935,#294943,.T.); +#294943 = LINE('',#294944,#294945); +#294944 = CARTESIAN_POINT('',(125.535557,-87.983147,1.51)); +#294945 = VECTOR('',#294946,1.); +#294946 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#294947 = PLANE('',#294948); +#294948 = AXIS2_PLACEMENT_3D('',#294949,#294950,#294951); +#294949 = CARTESIAN_POINT('',(125.535557,-87.983147,1.51)); +#294950 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#294951 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#294952 = ADVANCED_FACE('',(#294953),#294978,.T.); +#294953 = FACE_BOUND('',#294954,.T.); +#294954 = EDGE_LOOP('',(#294955,#294956,#294964,#294972)); +#294955 = ORIENTED_EDGE('',*,*,#294934,.T.); +#294956 = ORIENTED_EDGE('',*,*,#294957,.T.); +#294957 = EDGE_CURVE('',#294927,#294958,#294960,.T.); +#294958 = VERTEX_POINT('',#294959); +#294959 = CARTESIAN_POINT('',(124.697433,-88.,1.545)); +#294960 = LINE('',#294961,#294962); +#294961 = CARTESIAN_POINT('',(125.499509,-87.998079,1.545)); +#294962 = VECTOR('',#294963,1.); +#294963 = DIRECTION('',(-0.999997131916,-2.395028015309E-03,0.)); +#294964 = ORIENTED_EDGE('',*,*,#294965,.F.); +#294965 = EDGE_CURVE('',#294966,#294958,#294968,.T.); +#294966 = VERTEX_POINT('',#294967); +#294967 = CARTESIAN_POINT('',(124.697433,-88.,1.51)); +#294968 = LINE('',#294969,#294970); +#294969 = CARTESIAN_POINT('',(124.697433,-88.,1.51)); +#294970 = VECTOR('',#294971,1.); +#294971 = DIRECTION('',(0.,0.,1.)); +#294972 = ORIENTED_EDGE('',*,*,#294973,.F.); +#294973 = EDGE_CURVE('',#294935,#294966,#294974,.T.); +#294974 = LINE('',#294975,#294976); +#294975 = CARTESIAN_POINT('',(125.499509,-87.998079,1.51)); +#294976 = VECTOR('',#294977,1.); +#294977 = DIRECTION('',(-0.999997131916,-2.395028015309E-03,0.)); +#294978 = PLANE('',#294979); +#294979 = AXIS2_PLACEMENT_3D('',#294980,#294981,#294982); +#294980 = CARTESIAN_POINT('',(125.499509,-87.998079,1.51)); +#294981 = DIRECTION('',(2.395028015309E-03,-0.999997131916,0.)); +#294982 = DIRECTION('',(-0.999997131916,-2.395028015309E-03,0.)); +#294983 = ADVANCED_FACE('',(#294984),#295009,.T.); +#294984 = FACE_BOUND('',#294985,.T.); +#294985 = EDGE_LOOP('',(#294986,#294987,#294995,#295003)); +#294986 = ORIENTED_EDGE('',*,*,#294965,.T.); +#294987 = ORIENTED_EDGE('',*,*,#294988,.T.); +#294988 = EDGE_CURVE('',#294958,#294989,#294991,.T.); +#294989 = VERTEX_POINT('',#294990); +#294990 = CARTESIAN_POINT('',(124.697433,-88.039158,1.545)); +#294991 = LINE('',#294992,#294993); +#294992 = CARTESIAN_POINT('',(124.697433,-88.,1.545)); +#294993 = VECTOR('',#294994,1.); +#294994 = DIRECTION('',(0.,-1.,0.)); +#294995 = ORIENTED_EDGE('',*,*,#294996,.F.); +#294996 = EDGE_CURVE('',#294997,#294989,#294999,.T.); +#294997 = VERTEX_POINT('',#294998); +#294998 = CARTESIAN_POINT('',(124.697433,-88.039158,1.51)); +#294999 = LINE('',#295000,#295001); +#295000 = CARTESIAN_POINT('',(124.697433,-88.039158,1.51)); +#295001 = VECTOR('',#295002,1.); +#295002 = DIRECTION('',(0.,0.,1.)); +#295003 = ORIENTED_EDGE('',*,*,#295004,.F.); +#295004 = EDGE_CURVE('',#294966,#294997,#295005,.T.); +#295005 = LINE('',#295006,#295007); +#295006 = CARTESIAN_POINT('',(124.697433,-88.,1.51)); +#295007 = VECTOR('',#295008,1.); +#295008 = DIRECTION('',(0.,-1.,0.)); +#295009 = PLANE('',#295010); +#295010 = AXIS2_PLACEMENT_3D('',#295011,#295012,#295013); +#295011 = CARTESIAN_POINT('',(124.697433,-88.,1.51)); +#295012 = DIRECTION('',(1.,0.,-0.)); +#295013 = DIRECTION('',(0.,-1.,0.)); +#295014 = ADVANCED_FACE('',(#295015),#295042,.T.); +#295015 = FACE_BOUND('',#295016,.T.); +#295016 = EDGE_LOOP('',(#295017,#295018,#295027,#295035)); +#295017 = ORIENTED_EDGE('',*,*,#294996,.T.); +#295018 = ORIENTED_EDGE('',*,*,#295019,.T.); +#295019 = EDGE_CURVE('',#294989,#295020,#295022,.T.); +#295020 = VERTEX_POINT('',#295021); +#295021 = CARTESIAN_POINT('',(124.582628,-87.761994,1.545)); +#295022 = CIRCLE('',#295023,0.299999867683); +#295023 = AXIS2_PLACEMENT_3D('',#295024,#295025,#295026); +#295024 = CARTESIAN_POINT('',(124.39999970224,-87.99999993578,1.545)); +#295025 = DIRECTION('',(-0.,0.,-1.)); +#295026 = DIRECTION('',(0.99144476315,-0.1305269383,-0.)); +#295027 = ORIENTED_EDGE('',*,*,#295028,.F.); +#295028 = EDGE_CURVE('',#295029,#295020,#295031,.T.); +#295029 = VERTEX_POINT('',#295030); +#295030 = CARTESIAN_POINT('',(124.582628,-87.761994,1.51)); +#295031 = LINE('',#295032,#295033); +#295032 = CARTESIAN_POINT('',(124.582628,-87.761994,1.51)); +#295033 = VECTOR('',#295034,1.); +#295034 = DIRECTION('',(0.,0.,1.)); +#295035 = ORIENTED_EDGE('',*,*,#295036,.F.); +#295036 = EDGE_CURVE('',#294997,#295029,#295037,.T.); +#295037 = CIRCLE('',#295038,0.299999867683); +#295038 = AXIS2_PLACEMENT_3D('',#295039,#295040,#295041); +#295039 = CARTESIAN_POINT('',(124.39999970224,-87.99999993578,1.51)); +#295040 = DIRECTION('',(-0.,0.,-1.)); +#295041 = DIRECTION('',(0.99144476315,-0.1305269383,-0.)); +#295042 = CYLINDRICAL_SURFACE('',#295043,0.299999867683); +#295043 = AXIS2_PLACEMENT_3D('',#295044,#295045,#295046); +#295044 = CARTESIAN_POINT('',(124.39999970224,-87.99999993578,1.51)); +#295045 = DIRECTION('',(-0.,0.,-1.)); +#295046 = DIRECTION('',(0.99144476315,-0.1305269383,-0.)); +#295047 = ADVANCED_FACE('',(#295048),#295073,.T.); +#295048 = FACE_BOUND('',#295049,.T.); +#295049 = EDGE_LOOP('',(#295050,#295051,#295059,#295067)); +#295050 = ORIENTED_EDGE('',*,*,#295028,.T.); +#295051 = ORIENTED_EDGE('',*,*,#295052,.T.); +#295052 = EDGE_CURVE('',#295020,#295053,#295055,.T.); +#295053 = VERTEX_POINT('',#295054); +#295054 = CARTESIAN_POINT('',(124.620634,-87.8,1.545)); +#295055 = LINE('',#295056,#295057); +#295056 = CARTESIAN_POINT('',(124.582628,-87.761994,1.545)); +#295057 = VECTOR('',#295058,1.); +#295058 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295059 = ORIENTED_EDGE('',*,*,#295060,.F.); +#295060 = EDGE_CURVE('',#295061,#295053,#295063,.T.); +#295061 = VERTEX_POINT('',#295062); +#295062 = CARTESIAN_POINT('',(124.620634,-87.8,1.51)); +#295063 = LINE('',#295064,#295065); +#295064 = CARTESIAN_POINT('',(124.620634,-87.8,1.51)); +#295065 = VECTOR('',#295066,1.); +#295066 = DIRECTION('',(0.,0.,1.)); +#295067 = ORIENTED_EDGE('',*,*,#295068,.F.); +#295068 = EDGE_CURVE('',#295029,#295061,#295069,.T.); +#295069 = LINE('',#295070,#295071); +#295070 = CARTESIAN_POINT('',(124.582628,-87.761994,1.51)); +#295071 = VECTOR('',#295072,1.); +#295072 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295073 = PLANE('',#295074); +#295074 = AXIS2_PLACEMENT_3D('',#295075,#295076,#295077); +#295075 = CARTESIAN_POINT('',(124.582628,-87.761994,1.51)); +#295076 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#295077 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295078 = ADVANCED_FACE('',(#295079),#295104,.T.); +#295079 = FACE_BOUND('',#295080,.T.); +#295080 = EDGE_LOOP('',(#295081,#295082,#295090,#295098)); +#295081 = ORIENTED_EDGE('',*,*,#295060,.T.); +#295082 = ORIENTED_EDGE('',*,*,#295083,.T.); +#295083 = EDGE_CURVE('',#295053,#295084,#295086,.T.); +#295084 = VERTEX_POINT('',#295085); +#295085 = CARTESIAN_POINT('',(125.438578,-87.8,1.545)); +#295086 = LINE('',#295087,#295088); +#295087 = CARTESIAN_POINT('',(124.620634,-87.8,1.545)); +#295088 = VECTOR('',#295089,1.); +#295089 = DIRECTION('',(1.,0.,0.)); +#295090 = ORIENTED_EDGE('',*,*,#295091,.F.); +#295091 = EDGE_CURVE('',#295092,#295084,#295094,.T.); +#295092 = VERTEX_POINT('',#295093); +#295093 = CARTESIAN_POINT('',(125.438578,-87.8,1.51)); +#295094 = LINE('',#295095,#295096); +#295095 = CARTESIAN_POINT('',(125.438578,-87.8,1.51)); +#295096 = VECTOR('',#295097,1.); +#295097 = DIRECTION('',(0.,0.,1.)); +#295098 = ORIENTED_EDGE('',*,*,#295099,.F.); +#295099 = EDGE_CURVE('',#295061,#295092,#295100,.T.); +#295100 = LINE('',#295101,#295102); +#295101 = CARTESIAN_POINT('',(124.620634,-87.8,1.51)); +#295102 = VECTOR('',#295103,1.); +#295103 = DIRECTION('',(1.,0.,0.)); +#295104 = PLANE('',#295105); +#295105 = AXIS2_PLACEMENT_3D('',#295106,#295107,#295108); +#295106 = CARTESIAN_POINT('',(124.620634,-87.8,1.51)); +#295107 = DIRECTION('',(0.,1.,0.)); +#295108 = DIRECTION('',(1.,0.,0.)); +#295109 = ADVANCED_FACE('',(#295110),#295135,.T.); +#295110 = FACE_BOUND('',#295111,.T.); +#295111 = EDGE_LOOP('',(#295112,#295113,#295121,#295129)); +#295112 = ORIENTED_EDGE('',*,*,#295091,.T.); +#295113 = ORIENTED_EDGE('',*,*,#295114,.T.); +#295114 = EDGE_CURVE('',#295084,#295115,#295117,.T.); +#295115 = VERTEX_POINT('',#295116); +#295116 = CARTESIAN_POINT('',(125.7,-87.538578,1.545)); +#295117 = LINE('',#295118,#295119); +#295118 = CARTESIAN_POINT('',(125.438578,-87.8,1.545)); +#295119 = VECTOR('',#295120,1.); +#295120 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#295121 = ORIENTED_EDGE('',*,*,#295122,.F.); +#295122 = EDGE_CURVE('',#295123,#295115,#295125,.T.); +#295123 = VERTEX_POINT('',#295124); +#295124 = CARTESIAN_POINT('',(125.7,-87.538578,1.51)); +#295125 = LINE('',#295126,#295127); +#295126 = CARTESIAN_POINT('',(125.7,-87.538578,1.51)); +#295127 = VECTOR('',#295128,1.); +#295128 = DIRECTION('',(0.,0.,1.)); +#295129 = ORIENTED_EDGE('',*,*,#295130,.F.); +#295130 = EDGE_CURVE('',#295092,#295123,#295131,.T.); +#295131 = LINE('',#295132,#295133); +#295132 = CARTESIAN_POINT('',(125.438578,-87.8,1.51)); +#295133 = VECTOR('',#295134,1.); +#295134 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#295135 = PLANE('',#295136); +#295136 = AXIS2_PLACEMENT_3D('',#295137,#295138,#295139); +#295137 = CARTESIAN_POINT('',(125.438578,-87.8,1.51)); +#295138 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#295139 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#295140 = ADVANCED_FACE('',(#295141),#295166,.T.); +#295141 = FACE_BOUND('',#295142,.T.); +#295142 = EDGE_LOOP('',(#295143,#295144,#295152,#295160)); +#295143 = ORIENTED_EDGE('',*,*,#295122,.T.); +#295144 = ORIENTED_EDGE('',*,*,#295145,.T.); +#295145 = EDGE_CURVE('',#295115,#295146,#295148,.T.); +#295146 = VERTEX_POINT('',#295147); +#295147 = CARTESIAN_POINT('',(125.7,-86.341421,1.545)); +#295148 = LINE('',#295149,#295150); +#295149 = CARTESIAN_POINT('',(125.7,-87.538578,1.545)); +#295150 = VECTOR('',#295151,1.); +#295151 = DIRECTION('',(0.,1.,0.)); +#295152 = ORIENTED_EDGE('',*,*,#295153,.F.); +#295153 = EDGE_CURVE('',#295154,#295146,#295156,.T.); +#295154 = VERTEX_POINT('',#295155); +#295155 = CARTESIAN_POINT('',(125.7,-86.341421,1.51)); +#295156 = LINE('',#295157,#295158); +#295157 = CARTESIAN_POINT('',(125.7,-86.341421,1.51)); +#295158 = VECTOR('',#295159,1.); +#295159 = DIRECTION('',(0.,0.,1.)); +#295160 = ORIENTED_EDGE('',*,*,#295161,.F.); +#295161 = EDGE_CURVE('',#295123,#295154,#295162,.T.); +#295162 = LINE('',#295163,#295164); +#295163 = CARTESIAN_POINT('',(125.7,-87.538578,1.51)); +#295164 = VECTOR('',#295165,1.); +#295165 = DIRECTION('',(0.,1.,0.)); +#295166 = PLANE('',#295167); +#295167 = AXIS2_PLACEMENT_3D('',#295168,#295169,#295170); +#295168 = CARTESIAN_POINT('',(125.7,-87.538578,1.51)); +#295169 = DIRECTION('',(-1.,0.,0.)); +#295170 = DIRECTION('',(0.,1.,0.)); +#295171 = ADVANCED_FACE('',(#295172),#295197,.T.); +#295172 = FACE_BOUND('',#295173,.T.); +#295173 = EDGE_LOOP('',(#295174,#295175,#295183,#295191)); +#295174 = ORIENTED_EDGE('',*,*,#295153,.T.); +#295175 = ORIENTED_EDGE('',*,*,#295176,.T.); +#295176 = EDGE_CURVE('',#295146,#295177,#295179,.T.); +#295177 = VERTEX_POINT('',#295178); +#295178 = CARTESIAN_POINT('',(125.676853,-86.315557,1.545)); +#295179 = LINE('',#295180,#295181); +#295180 = CARTESIAN_POINT('',(125.7,-86.341421,1.545)); +#295181 = VECTOR('',#295182,1.); +#295182 = DIRECTION('',(-0.666883281729,0.745162189426,0.)); +#295183 = ORIENTED_EDGE('',*,*,#295184,.F.); +#295184 = EDGE_CURVE('',#295185,#295177,#295187,.T.); +#295185 = VERTEX_POINT('',#295186); +#295186 = CARTESIAN_POINT('',(125.676853,-86.315557,1.51)); +#295187 = LINE('',#295188,#295189); +#295188 = CARTESIAN_POINT('',(125.676853,-86.315557,1.51)); +#295189 = VECTOR('',#295190,1.); +#295190 = DIRECTION('',(0.,0.,1.)); +#295191 = ORIENTED_EDGE('',*,*,#295192,.F.); +#295192 = EDGE_CURVE('',#295154,#295185,#295193,.T.); +#295193 = LINE('',#295194,#295195); +#295194 = CARTESIAN_POINT('',(125.7,-86.341421,1.51)); +#295195 = VECTOR('',#295196,1.); +#295196 = DIRECTION('',(-0.666883281729,0.745162189426,0.)); +#295197 = PLANE('',#295198); +#295198 = AXIS2_PLACEMENT_3D('',#295199,#295200,#295201); +#295199 = CARTESIAN_POINT('',(125.7,-86.341421,1.51)); +#295200 = DIRECTION('',(-0.745162189426,-0.666883281729,0.)); +#295201 = DIRECTION('',(-0.666883281729,0.745162189426,0.)); +#295202 = ADVANCED_FACE('',(#295203),#295228,.T.); +#295203 = FACE_BOUND('',#295204,.T.); +#295204 = EDGE_LOOP('',(#295205,#295206,#295214,#295222)); +#295205 = ORIENTED_EDGE('',*,*,#295184,.T.); +#295206 = ORIENTED_EDGE('',*,*,#295207,.T.); +#295207 = EDGE_CURVE('',#295177,#295208,#295210,.T.); +#295208 = VERTEX_POINT('',#295209); +#295209 = CARTESIAN_POINT('',(125.661921,-86.279509,1.545)); +#295210 = LINE('',#295211,#295212); +#295211 = CARTESIAN_POINT('',(125.676853,-86.315557,1.545)); +#295212 = VECTOR('',#295213,1.); +#295213 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#295214 = ORIENTED_EDGE('',*,*,#295215,.F.); +#295215 = EDGE_CURVE('',#295216,#295208,#295218,.T.); +#295216 = VERTEX_POINT('',#295217); +#295217 = CARTESIAN_POINT('',(125.661921,-86.279509,1.51)); +#295218 = LINE('',#295219,#295220); +#295219 = CARTESIAN_POINT('',(125.661921,-86.279509,1.51)); +#295220 = VECTOR('',#295221,1.); +#295221 = DIRECTION('',(0.,0.,1.)); +#295222 = ORIENTED_EDGE('',*,*,#295223,.F.); +#295223 = EDGE_CURVE('',#295185,#295216,#295224,.T.); +#295224 = LINE('',#295225,#295226); +#295225 = CARTESIAN_POINT('',(125.676853,-86.315557,1.51)); +#295226 = VECTOR('',#295227,1.); +#295227 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#295228 = PLANE('',#295229); +#295229 = AXIS2_PLACEMENT_3D('',#295230,#295231,#295232); +#295230 = CARTESIAN_POINT('',(125.676853,-86.315557,1.51)); +#295231 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#295232 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#295233 = ADVANCED_FACE('',(#295234),#295259,.T.); +#295234 = FACE_BOUND('',#295235,.T.); +#295235 = EDGE_LOOP('',(#295236,#295237,#295245,#295253)); +#295236 = ORIENTED_EDGE('',*,*,#295215,.T.); +#295237 = ORIENTED_EDGE('',*,*,#295238,.T.); +#295238 = EDGE_CURVE('',#295208,#295239,#295241,.T.); +#295239 = VERTEX_POINT('',#295240); +#295240 = CARTESIAN_POINT('',(125.66,-83.001422,1.545)); +#295241 = LINE('',#295242,#295243); +#295242 = CARTESIAN_POINT('',(125.661921,-86.279509,1.545)); +#295243 = VECTOR('',#295244,1.); +#295244 = DIRECTION('',(-5.860124121673E-04,0.999999828295,0.)); +#295245 = ORIENTED_EDGE('',*,*,#295246,.F.); +#295246 = EDGE_CURVE('',#295247,#295239,#295249,.T.); +#295247 = VERTEX_POINT('',#295248); +#295248 = CARTESIAN_POINT('',(125.66,-83.001422,1.51)); +#295249 = LINE('',#295250,#295251); +#295250 = CARTESIAN_POINT('',(125.66,-83.001422,1.51)); +#295251 = VECTOR('',#295252,1.); +#295252 = DIRECTION('',(0.,0.,1.)); +#295253 = ORIENTED_EDGE('',*,*,#295254,.F.); +#295254 = EDGE_CURVE('',#295216,#295247,#295255,.T.); +#295255 = LINE('',#295256,#295257); +#295256 = CARTESIAN_POINT('',(125.661921,-86.279509,1.51)); +#295257 = VECTOR('',#295258,1.); +#295258 = DIRECTION('',(-5.860124121673E-04,0.999999828295,0.)); +#295259 = PLANE('',#295260); +#295260 = AXIS2_PLACEMENT_3D('',#295261,#295262,#295263); +#295261 = CARTESIAN_POINT('',(125.661921,-86.279509,1.51)); +#295262 = DIRECTION('',(-0.999999828295,-5.860124121673E-04,0.)); +#295263 = DIRECTION('',(-5.860124121673E-04,0.999999828295,0.)); +#295264 = ADVANCED_FACE('',(#295265),#295290,.T.); +#295265 = FACE_BOUND('',#295266,.T.); +#295266 = EDGE_LOOP('',(#295267,#295268,#295276,#295284)); +#295267 = ORIENTED_EDGE('',*,*,#295246,.T.); +#295268 = ORIENTED_EDGE('',*,*,#295269,.T.); +#295269 = EDGE_CURVE('',#295239,#295270,#295272,.T.); +#295270 = VERTEX_POINT('',#295271); +#295271 = CARTESIAN_POINT('',(125.516853,-82.855557,1.545)); +#295272 = LINE('',#295273,#295274); +#295273 = CARTESIAN_POINT('',(125.66,-83.001422,1.545)); +#295274 = VECTOR('',#295275,1.); +#295275 = DIRECTION('',(-0.700425854675,0.71372517267,0.)); +#295276 = ORIENTED_EDGE('',*,*,#295277,.F.); +#295277 = EDGE_CURVE('',#295278,#295270,#295280,.T.); +#295278 = VERTEX_POINT('',#295279); +#295279 = CARTESIAN_POINT('',(125.516853,-82.855557,1.51)); +#295280 = LINE('',#295281,#295282); +#295281 = CARTESIAN_POINT('',(125.516853,-82.855557,1.51)); +#295282 = VECTOR('',#295283,1.); +#295283 = DIRECTION('',(0.,0.,1.)); +#295284 = ORIENTED_EDGE('',*,*,#295285,.F.); +#295285 = EDGE_CURVE('',#295247,#295278,#295286,.T.); +#295286 = LINE('',#295287,#295288); +#295287 = CARTESIAN_POINT('',(125.66,-83.001422,1.51)); +#295288 = VECTOR('',#295289,1.); +#295289 = DIRECTION('',(-0.700425854675,0.71372517267,0.)); +#295290 = PLANE('',#295291); +#295291 = AXIS2_PLACEMENT_3D('',#295292,#295293,#295294); +#295292 = CARTESIAN_POINT('',(125.66,-83.001422,1.51)); +#295293 = DIRECTION('',(-0.71372517267,-0.700425854675,0.)); +#295294 = DIRECTION('',(-0.700425854675,0.71372517267,0.)); +#295295 = ADVANCED_FACE('',(#295296),#295323,.T.); +#295296 = FACE_BOUND('',#295297,.T.); +#295297 = EDGE_LOOP('',(#295298,#295299,#295308,#295316)); +#295298 = ORIENTED_EDGE('',*,*,#295277,.T.); +#295299 = ORIENTED_EDGE('',*,*,#295300,.T.); +#295300 = EDGE_CURVE('',#295270,#295301,#295303,.T.); +#295301 = VERTEX_POINT('',#295302); +#295302 = CARTESIAN_POINT('',(125.655557,-82.716853,1.545)); +#295303 = CIRCLE('',#295304,9.999988522645E-02); +#295304 = AXIS2_PLACEMENT_3D('',#295305,#295306,#295307); +#295305 = CARTESIAN_POINT('',(125.59999951407,-82.79999951407,1.545)); +#295306 = DIRECTION('',(0.,0.,-1.)); +#295307 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#295308 = ORIENTED_EDGE('',*,*,#295309,.F.); +#295309 = EDGE_CURVE('',#295310,#295301,#295312,.T.); +#295310 = VERTEX_POINT('',#295311); +#295311 = CARTESIAN_POINT('',(125.655557,-82.716853,1.51)); +#295312 = LINE('',#295313,#295314); +#295313 = CARTESIAN_POINT('',(125.655557,-82.716853,1.51)); +#295314 = VECTOR('',#295315,1.); +#295315 = DIRECTION('',(0.,0.,1.)); +#295316 = ORIENTED_EDGE('',*,*,#295317,.F.); +#295317 = EDGE_CURVE('',#295278,#295310,#295318,.T.); +#295318 = CIRCLE('',#295319,9.999988522645E-02); +#295319 = AXIS2_PLACEMENT_3D('',#295320,#295321,#295322); +#295320 = CARTESIAN_POINT('',(125.59999951407,-82.79999951407,1.51)); +#295321 = DIRECTION('',(0.,0.,-1.)); +#295322 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#295323 = CYLINDRICAL_SURFACE('',#295324,9.999988522645E-02); +#295324 = AXIS2_PLACEMENT_3D('',#295325,#295326,#295327); +#295325 = CARTESIAN_POINT('',(125.59999951407,-82.79999951407,1.51)); +#295326 = DIRECTION('',(0.,0.,-1.)); +#295327 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#295328 = ADVANCED_FACE('',(#295329),#295345,.T.); +#295329 = FACE_BOUND('',#295330,.T.); +#295330 = EDGE_LOOP('',(#295331,#295332,#295338,#295339)); +#295331 = ORIENTED_EDGE('',*,*,#295309,.T.); +#295332 = ORIENTED_EDGE('',*,*,#295333,.T.); +#295333 = EDGE_CURVE('',#295301,#294702,#295334,.T.); +#295334 = LINE('',#295335,#295336); +#295335 = CARTESIAN_POINT('',(125.655557,-82.716853,1.545)); +#295336 = VECTOR('',#295337,1.); +#295337 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295338 = ORIENTED_EDGE('',*,*,#294699,.F.); +#295339 = ORIENTED_EDGE('',*,*,#295340,.F.); +#295340 = EDGE_CURVE('',#295310,#294700,#295341,.T.); +#295341 = LINE('',#295342,#295343); +#295342 = CARTESIAN_POINT('',(125.655557,-82.716853,1.51)); +#295343 = VECTOR('',#295344,1.); +#295344 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295345 = PLANE('',#295346); +#295346 = AXIS2_PLACEMENT_3D('',#295347,#295348,#295349); +#295347 = CARTESIAN_POINT('',(125.655557,-82.716853,1.51)); +#295348 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#295349 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#295350 = ADVANCED_FACE('',(#295351),#295378,.F.); +#295351 = FACE_BOUND('',#295352,.T.); +#295352 = EDGE_LOOP('',(#295353,#295363,#295370,#295371)); +#295353 = ORIENTED_EDGE('',*,*,#295354,.T.); +#295354 = EDGE_CURVE('',#295355,#295357,#295359,.T.); +#295355 = VERTEX_POINT('',#295356); +#295356 = CARTESIAN_POINT('',(124.537255,-88.,1.51)); +#295357 = VERTEX_POINT('',#295358); +#295358 = CARTESIAN_POINT('',(124.537255,-88.,1.545)); +#295359 = LINE('',#295360,#295361); +#295360 = CARTESIAN_POINT('',(124.537255,-88.,1.51)); +#295361 = VECTOR('',#295362,1.); +#295362 = DIRECTION('',(0.,0.,1.)); +#295363 = ORIENTED_EDGE('',*,*,#295364,.T.); +#295364 = EDGE_CURVE('',#295357,#295357,#295365,.T.); +#295365 = CIRCLE('',#295366,0.137255); +#295366 = AXIS2_PLACEMENT_3D('',#295367,#295368,#295369); +#295367 = CARTESIAN_POINT('',(124.4,-88.,1.545)); +#295368 = DIRECTION('',(0.,0.,1.)); +#295369 = DIRECTION('',(1.,0.,-0.)); +#295370 = ORIENTED_EDGE('',*,*,#295354,.F.); +#295371 = ORIENTED_EDGE('',*,*,#295372,.F.); +#295372 = EDGE_CURVE('',#295355,#295355,#295373,.T.); +#295373 = CIRCLE('',#295374,0.137255); +#295374 = AXIS2_PLACEMENT_3D('',#295375,#295376,#295377); +#295375 = CARTESIAN_POINT('',(124.4,-88.,1.51)); +#295376 = DIRECTION('',(0.,0.,1.)); +#295377 = DIRECTION('',(1.,0.,-0.)); +#295378 = CYLINDRICAL_SURFACE('',#295379,0.137255); +#295379 = AXIS2_PLACEMENT_3D('',#295380,#295381,#295382); +#295380 = CARTESIAN_POINT('',(124.4,-88.,1.51)); +#295381 = DIRECTION('',(-0.,-0.,-1.)); +#295382 = DIRECTION('',(1.,0.,-0.)); +#295383 = ADVANCED_FACE('',(#295384,#295407),#295410,.F.); +#295384 = FACE_BOUND('',#295385,.T.); +#295385 = EDGE_LOOP('',(#295386,#295387,#295388,#295389,#295390,#295391, + #295392,#295393,#295394,#295395,#295396,#295397,#295398,#295399, + #295400,#295401,#295402,#295403,#295404,#295405,#295406)); +#295386 = ORIENTED_EDGE('',*,*,#294725,.T.); +#295387 = ORIENTED_EDGE('',*,*,#294756,.T.); +#295388 = ORIENTED_EDGE('',*,*,#294787,.T.); +#295389 = ORIENTED_EDGE('',*,*,#294818,.T.); +#295390 = ORIENTED_EDGE('',*,*,#294849,.T.); +#295391 = ORIENTED_EDGE('',*,*,#294880,.T.); +#295392 = ORIENTED_EDGE('',*,*,#294911,.T.); +#295393 = ORIENTED_EDGE('',*,*,#294942,.T.); +#295394 = ORIENTED_EDGE('',*,*,#294973,.T.); +#295395 = ORIENTED_EDGE('',*,*,#295004,.T.); +#295396 = ORIENTED_EDGE('',*,*,#295036,.T.); +#295397 = ORIENTED_EDGE('',*,*,#295068,.T.); +#295398 = ORIENTED_EDGE('',*,*,#295099,.T.); +#295399 = ORIENTED_EDGE('',*,*,#295130,.T.); +#295400 = ORIENTED_EDGE('',*,*,#295161,.T.); +#295401 = ORIENTED_EDGE('',*,*,#295192,.T.); +#295402 = ORIENTED_EDGE('',*,*,#295223,.T.); +#295403 = ORIENTED_EDGE('',*,*,#295254,.T.); +#295404 = ORIENTED_EDGE('',*,*,#295285,.T.); +#295405 = ORIENTED_EDGE('',*,*,#295317,.T.); +#295406 = ORIENTED_EDGE('',*,*,#295340,.T.); +#295407 = FACE_BOUND('',#295408,.T.); +#295408 = EDGE_LOOP('',(#295409)); +#295409 = ORIENTED_EDGE('',*,*,#295372,.T.); +#295410 = PLANE('',#295411); +#295411 = AXIS2_PLACEMENT_3D('',#295412,#295413,#295414); +#295412 = CARTESIAN_POINT('',(0.,0.,1.51)); +#295413 = DIRECTION('',(0.,0.,1.)); +#295414 = DIRECTION('',(1.,0.,-0.)); +#295415 = ADVANCED_FACE('',(#295416,#295439),#295442,.T.); +#295416 = FACE_BOUND('',#295417,.F.); +#295417 = EDGE_LOOP('',(#295418,#295419,#295420,#295421,#295422,#295423, + #295424,#295425,#295426,#295427,#295428,#295429,#295430,#295431, + #295432,#295433,#295434,#295435,#295436,#295437,#295438)); +#295418 = ORIENTED_EDGE('',*,*,#294709,.T.); +#295419 = ORIENTED_EDGE('',*,*,#294740,.T.); +#295420 = ORIENTED_EDGE('',*,*,#294771,.T.); +#295421 = ORIENTED_EDGE('',*,*,#294802,.T.); +#295422 = ORIENTED_EDGE('',*,*,#294833,.T.); +#295423 = ORIENTED_EDGE('',*,*,#294864,.T.); +#295424 = ORIENTED_EDGE('',*,*,#294895,.T.); +#295425 = ORIENTED_EDGE('',*,*,#294926,.T.); +#295426 = ORIENTED_EDGE('',*,*,#294957,.T.); +#295427 = ORIENTED_EDGE('',*,*,#294988,.T.); +#295428 = ORIENTED_EDGE('',*,*,#295019,.T.); +#295429 = ORIENTED_EDGE('',*,*,#295052,.T.); +#295430 = ORIENTED_EDGE('',*,*,#295083,.T.); +#295431 = ORIENTED_EDGE('',*,*,#295114,.T.); +#295432 = ORIENTED_EDGE('',*,*,#295145,.T.); +#295433 = ORIENTED_EDGE('',*,*,#295176,.T.); +#295434 = ORIENTED_EDGE('',*,*,#295207,.T.); +#295435 = ORIENTED_EDGE('',*,*,#295238,.T.); +#295436 = ORIENTED_EDGE('',*,*,#295269,.T.); +#295437 = ORIENTED_EDGE('',*,*,#295300,.T.); +#295438 = ORIENTED_EDGE('',*,*,#295333,.T.); +#295439 = FACE_BOUND('',#295440,.F.); +#295440 = EDGE_LOOP('',(#295441)); +#295441 = ORIENTED_EDGE('',*,*,#295364,.T.); +#295442 = PLANE('',#295443); +#295443 = AXIS2_PLACEMENT_3D('',#295444,#295445,#295446); +#295444 = CARTESIAN_POINT('',(0.,0.,1.545)); +#295445 = DIRECTION('',(0.,0.,1.)); +#295446 = DIRECTION('',(1.,0.,-0.)); +#295447 = MANIFOLD_SOLID_BREP('',#295448); +#295448 = CLOSED_SHELL('',(#295449,#295489,#295520,#295551,#295582, + #295613,#295644,#295675,#295706,#295737,#295768,#295801,#295823, + #295856,#295879)); +#295449 = ADVANCED_FACE('',(#295450),#295484,.T.); +#295450 = FACE_BOUND('',#295451,.T.); +#295451 = EDGE_LOOP('',(#295452,#295462,#295470,#295478)); +#295452 = ORIENTED_EDGE('',*,*,#295453,.T.); +#295453 = EDGE_CURVE('',#295454,#295456,#295458,.T.); +#295454 = VERTEX_POINT('',#295455); +#295455 = CARTESIAN_POINT('',(139.628078,-87.730499,1.51)); +#295456 = VERTEX_POINT('',#295457); +#295457 = CARTESIAN_POINT('',(139.628078,-87.730499,1.545)); +#295458 = LINE('',#295459,#295460); +#295459 = CARTESIAN_POINT('',(139.628078,-87.730499,1.51)); +#295460 = VECTOR('',#295461,1.); +#295461 = DIRECTION('',(0.,0.,1.)); +#295462 = ORIENTED_EDGE('',*,*,#295463,.T.); +#295463 = EDGE_CURVE('',#295456,#295464,#295466,.T.); +#295464 = VERTEX_POINT('',#295465); +#295465 = CARTESIAN_POINT('',(139.9,-87.458578,1.545)); +#295466 = LINE('',#295467,#295468); +#295467 = CARTESIAN_POINT('',(139.628078,-87.730499,1.545)); +#295468 = VECTOR('',#295469,1.); +#295469 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#295470 = ORIENTED_EDGE('',*,*,#295471,.F.); +#295471 = EDGE_CURVE('',#295472,#295464,#295474,.T.); +#295472 = VERTEX_POINT('',#295473); +#295473 = CARTESIAN_POINT('',(139.9,-87.458578,1.51)); +#295474 = LINE('',#295475,#295476); +#295475 = CARTESIAN_POINT('',(139.9,-87.458578,1.51)); +#295476 = VECTOR('',#295477,1.); +#295477 = DIRECTION('',(0.,0.,1.)); +#295478 = ORIENTED_EDGE('',*,*,#295479,.F.); +#295479 = EDGE_CURVE('',#295454,#295472,#295480,.T.); +#295480 = LINE('',#295481,#295482); +#295481 = CARTESIAN_POINT('',(139.628078,-87.730499,1.51)); +#295482 = VECTOR('',#295483,1.); +#295483 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#295484 = PLANE('',#295485); +#295485 = AXIS2_PLACEMENT_3D('',#295486,#295487,#295488); +#295486 = CARTESIAN_POINT('',(139.628078,-87.730499,1.51)); +#295487 = DIRECTION('',(-0.707105480981,0.707108081389,0.)); +#295488 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#295489 = ADVANCED_FACE('',(#295490),#295515,.T.); +#295490 = FACE_BOUND('',#295491,.T.); +#295491 = EDGE_LOOP('',(#295492,#295493,#295501,#295509)); +#295492 = ORIENTED_EDGE('',*,*,#295471,.T.); +#295493 = ORIENTED_EDGE('',*,*,#295494,.T.); +#295494 = EDGE_CURVE('',#295464,#295495,#295497,.T.); +#295495 = VERTEX_POINT('',#295496); +#295496 = CARTESIAN_POINT('',(139.90088,-87.01937,1.545)); +#295497 = LINE('',#295498,#295499); +#295498 = CARTESIAN_POINT('',(139.9,-87.458578,1.545)); +#295499 = VECTOR('',#295500,1.); +#295500 = DIRECTION('',(2.003602470008E-03,0.999997992787,0.)); +#295501 = ORIENTED_EDGE('',*,*,#295502,.F.); +#295502 = EDGE_CURVE('',#295503,#295495,#295505,.T.); +#295503 = VERTEX_POINT('',#295504); +#295504 = CARTESIAN_POINT('',(139.90088,-87.01937,1.51)); +#295505 = LINE('',#295506,#295507); +#295506 = CARTESIAN_POINT('',(139.90088,-87.01937,1.51)); +#295507 = VECTOR('',#295508,1.); +#295508 = DIRECTION('',(0.,0.,1.)); +#295509 = ORIENTED_EDGE('',*,*,#295510,.F.); +#295510 = EDGE_CURVE('',#295472,#295503,#295511,.T.); +#295511 = LINE('',#295512,#295513); +#295512 = CARTESIAN_POINT('',(139.9,-87.458578,1.51)); +#295513 = VECTOR('',#295514,1.); +#295514 = DIRECTION('',(2.003602470008E-03,0.999997992787,0.)); +#295515 = PLANE('',#295516); +#295516 = AXIS2_PLACEMENT_3D('',#295517,#295518,#295519); +#295517 = CARTESIAN_POINT('',(139.9,-87.458578,1.51)); +#295518 = DIRECTION('',(-0.999997992787,2.003602470008E-03,0.)); +#295519 = DIRECTION('',(2.003602470008E-03,0.999997992787,0.)); +#295520 = ADVANCED_FACE('',(#295521),#295546,.T.); +#295521 = FACE_BOUND('',#295522,.T.); +#295522 = EDGE_LOOP('',(#295523,#295524,#295532,#295540)); +#295523 = ORIENTED_EDGE('',*,*,#295502,.T.); +#295524 = ORIENTED_EDGE('',*,*,#295525,.T.); +#295525 = EDGE_CURVE('',#295495,#295526,#295528,.T.); +#295526 = VERTEX_POINT('',#295527); +#295527 = CARTESIAN_POINT('',(139.93352,-87.028116,1.545)); +#295528 = LINE('',#295529,#295530); +#295529 = CARTESIAN_POINT('',(139.90088,-87.01937,1.545)); +#295530 = VECTOR('',#295531,1.); +#295531 = DIRECTION('',(0.965924802657,-0.25882286532,0.)); +#295532 = ORIENTED_EDGE('',*,*,#295533,.F.); +#295533 = EDGE_CURVE('',#295534,#295526,#295536,.T.); +#295534 = VERTEX_POINT('',#295535); +#295535 = CARTESIAN_POINT('',(139.93352,-87.028116,1.51)); +#295536 = LINE('',#295537,#295538); +#295537 = CARTESIAN_POINT('',(139.93352,-87.028116,1.51)); +#295538 = VECTOR('',#295539,1.); +#295539 = DIRECTION('',(0.,0.,1.)); +#295540 = ORIENTED_EDGE('',*,*,#295541,.F.); +#295541 = EDGE_CURVE('',#295503,#295534,#295542,.T.); +#295542 = LINE('',#295543,#295544); +#295543 = CARTESIAN_POINT('',(139.90088,-87.01937,1.51)); +#295544 = VECTOR('',#295545,1.); +#295545 = DIRECTION('',(0.965924802657,-0.25882286532,0.)); +#295546 = PLANE('',#295547); +#295547 = AXIS2_PLACEMENT_3D('',#295548,#295549,#295550); +#295548 = CARTESIAN_POINT('',(139.90088,-87.01937,1.51)); +#295549 = DIRECTION('',(0.25882286532,0.965924802657,-0.)); +#295550 = DIRECTION('',(0.965924802657,-0.25882286532,0.)); +#295551 = ADVANCED_FACE('',(#295552),#295577,.T.); +#295552 = FACE_BOUND('',#295553,.T.); +#295553 = EDGE_LOOP('',(#295554,#295555,#295563,#295571)); +#295554 = ORIENTED_EDGE('',*,*,#295533,.T.); +#295555 = ORIENTED_EDGE('',*,*,#295556,.T.); +#295556 = EDGE_CURVE('',#295526,#295557,#295559,.T.); +#295557 = VERTEX_POINT('',#295558); +#295558 = CARTESIAN_POINT('',(140.,-87.032473,1.545)); +#295559 = LINE('',#295560,#295561); +#295560 = CARTESIAN_POINT('',(139.93352,-87.028116,1.545)); +#295561 = VECTOR('',#295562,1.); +#295562 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#295563 = ORIENTED_EDGE('',*,*,#295564,.F.); +#295564 = EDGE_CURVE('',#295565,#295557,#295567,.T.); +#295565 = VERTEX_POINT('',#295566); +#295566 = CARTESIAN_POINT('',(140.,-87.032473,1.51)); +#295567 = LINE('',#295568,#295569); +#295568 = CARTESIAN_POINT('',(140.,-87.032473,1.51)); +#295569 = VECTOR('',#295570,1.); +#295570 = DIRECTION('',(0.,0.,1.)); +#295571 = ORIENTED_EDGE('',*,*,#295572,.F.); +#295572 = EDGE_CURVE('',#295534,#295565,#295573,.T.); +#295573 = LINE('',#295574,#295575); +#295574 = CARTESIAN_POINT('',(139.93352,-87.028116,1.51)); +#295575 = VECTOR('',#295576,1.); +#295576 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#295577 = PLANE('',#295578); +#295578 = AXIS2_PLACEMENT_3D('',#295579,#295580,#295581); +#295579 = CARTESIAN_POINT('',(139.93352,-87.028116,1.51)); +#295580 = DIRECTION('',(6.539820599336E-02,0.997859245912,-0.)); +#295581 = DIRECTION('',(0.997859245912,-6.539820599336E-02,0.)); +#295582 = ADVANCED_FACE('',(#295583),#295608,.T.); +#295583 = FACE_BOUND('',#295584,.T.); +#295584 = EDGE_LOOP('',(#295585,#295586,#295594,#295602)); +#295585 = ORIENTED_EDGE('',*,*,#295564,.T.); +#295586 = ORIENTED_EDGE('',*,*,#295587,.T.); +#295587 = EDGE_CURVE('',#295557,#295588,#295590,.T.); +#295588 = VERTEX_POINT('',#295589); +#295589 = CARTESIAN_POINT('',(140.066479,-87.028116,1.545)); +#295590 = LINE('',#295591,#295592); +#295591 = CARTESIAN_POINT('',(140.,-87.032473,1.545)); +#295592 = VECTOR('',#295593,1.); +#295593 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#295594 = ORIENTED_EDGE('',*,*,#295595,.F.); +#295595 = EDGE_CURVE('',#295596,#295588,#295598,.T.); +#295596 = VERTEX_POINT('',#295597); +#295597 = CARTESIAN_POINT('',(140.066479,-87.028116,1.51)); +#295598 = LINE('',#295599,#295600); +#295599 = CARTESIAN_POINT('',(140.066479,-87.028116,1.51)); +#295600 = VECTOR('',#295601,1.); +#295601 = DIRECTION('',(0.,0.,1.)); +#295602 = ORIENTED_EDGE('',*,*,#295603,.F.); +#295603 = EDGE_CURVE('',#295565,#295596,#295604,.T.); +#295604 = LINE('',#295605,#295606); +#295605 = CARTESIAN_POINT('',(140.,-87.032473,1.51)); +#295606 = VECTOR('',#295607,1.); +#295607 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#295608 = PLANE('',#295609); +#295609 = AXIS2_PLACEMENT_3D('',#295610,#295611,#295612); +#295610 = CARTESIAN_POINT('',(140.,-87.032473,1.51)); +#295611 = DIRECTION('',(-6.539918552822E-02,0.997859181715,0.)); +#295612 = DIRECTION('',(0.997859181715,6.539918552822E-02,0.)); +#295613 = ADVANCED_FACE('',(#295614),#295639,.T.); +#295614 = FACE_BOUND('',#295615,.T.); +#295615 = EDGE_LOOP('',(#295616,#295617,#295625,#295633)); +#295616 = ORIENTED_EDGE('',*,*,#295595,.T.); +#295617 = ORIENTED_EDGE('',*,*,#295618,.T.); +#295618 = EDGE_CURVE('',#295588,#295619,#295621,.T.); +#295619 = VERTEX_POINT('',#295620); +#295620 = CARTESIAN_POINT('',(140.098079,-87.019648,1.545)); +#295621 = LINE('',#295622,#295623); +#295622 = CARTESIAN_POINT('',(140.066479,-87.028116,1.545)); +#295623 = VECTOR('',#295624,1.); +#295624 = DIRECTION('',(0.965919670424,0.258842018011,0.)); +#295625 = ORIENTED_EDGE('',*,*,#295626,.F.); +#295626 = EDGE_CURVE('',#295627,#295619,#295629,.T.); +#295627 = VERTEX_POINT('',#295628); +#295628 = CARTESIAN_POINT('',(140.098079,-87.019648,1.51)); +#295629 = LINE('',#295630,#295631); +#295630 = CARTESIAN_POINT('',(140.098079,-87.019648,1.51)); +#295631 = VECTOR('',#295632,1.); +#295632 = DIRECTION('',(0.,0.,1.)); +#295633 = ORIENTED_EDGE('',*,*,#295634,.F.); +#295634 = EDGE_CURVE('',#295596,#295627,#295635,.T.); +#295635 = LINE('',#295636,#295637); +#295636 = CARTESIAN_POINT('',(140.066479,-87.028116,1.51)); +#295637 = VECTOR('',#295638,1.); +#295638 = DIRECTION('',(0.965919670424,0.258842018011,0.)); +#295639 = PLANE('',#295640); +#295640 = AXIS2_PLACEMENT_3D('',#295641,#295642,#295643); +#295641 = CARTESIAN_POINT('',(140.066479,-87.028116,1.51)); +#295642 = DIRECTION('',(-0.258842018011,0.965919670424,0.)); +#295643 = DIRECTION('',(0.965919670424,0.258842018011,0.)); +#295644 = ADVANCED_FACE('',(#295645),#295670,.T.); +#295645 = FACE_BOUND('',#295646,.T.); +#295646 = EDGE_LOOP('',(#295647,#295648,#295656,#295664)); +#295647 = ORIENTED_EDGE('',*,*,#295626,.T.); +#295648 = ORIENTED_EDGE('',*,*,#295649,.T.); +#295649 = EDGE_CURVE('',#295619,#295650,#295652,.T.); +#295650 = VERTEX_POINT('',#295651); +#295651 = CARTESIAN_POINT('',(140.098079,-87.519509,1.545)); +#295652 = LINE('',#295653,#295654); +#295653 = CARTESIAN_POINT('',(140.098079,-87.019648,1.545)); +#295654 = VECTOR('',#295655,1.); +#295655 = DIRECTION('',(0.,-1.,0.)); +#295656 = ORIENTED_EDGE('',*,*,#295657,.F.); +#295657 = EDGE_CURVE('',#295658,#295650,#295660,.T.); +#295658 = VERTEX_POINT('',#295659); +#295659 = CARTESIAN_POINT('',(140.098079,-87.519509,1.51)); +#295660 = LINE('',#295661,#295662); +#295661 = CARTESIAN_POINT('',(140.098079,-87.519509,1.51)); +#295662 = VECTOR('',#295663,1.); +#295663 = DIRECTION('',(0.,0.,1.)); +#295664 = ORIENTED_EDGE('',*,*,#295665,.F.); +#295665 = EDGE_CURVE('',#295627,#295658,#295666,.T.); +#295666 = LINE('',#295667,#295668); +#295667 = CARTESIAN_POINT('',(140.098079,-87.019648,1.51)); +#295668 = VECTOR('',#295669,1.); +#295669 = DIRECTION('',(0.,-1.,0.)); +#295670 = PLANE('',#295671); +#295671 = AXIS2_PLACEMENT_3D('',#295672,#295673,#295674); +#295672 = CARTESIAN_POINT('',(140.098079,-87.019648,1.51)); +#295673 = DIRECTION('',(1.,0.,-0.)); +#295674 = DIRECTION('',(0.,-1.,0.)); +#295675 = ADVANCED_FACE('',(#295676),#295701,.T.); +#295676 = FACE_BOUND('',#295677,.T.); +#295677 = EDGE_LOOP('',(#295678,#295679,#295687,#295695)); +#295678 = ORIENTED_EDGE('',*,*,#295657,.T.); +#295679 = ORIENTED_EDGE('',*,*,#295680,.T.); +#295680 = EDGE_CURVE('',#295650,#295681,#295683,.T.); +#295681 = VERTEX_POINT('',#295682); +#295682 = CARTESIAN_POINT('',(140.083147,-87.555557,1.545)); +#295683 = LINE('',#295684,#295685); +#295684 = CARTESIAN_POINT('',(140.098079,-87.519509,1.545)); +#295685 = VECTOR('',#295686,1.); +#295686 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#295687 = ORIENTED_EDGE('',*,*,#295688,.F.); +#295688 = EDGE_CURVE('',#295689,#295681,#295691,.T.); +#295689 = VERTEX_POINT('',#295690); +#295690 = CARTESIAN_POINT('',(140.083147,-87.555557,1.51)); +#295691 = LINE('',#295692,#295693); +#295692 = CARTESIAN_POINT('',(140.083147,-87.555557,1.51)); +#295693 = VECTOR('',#295694,1.); +#295694 = DIRECTION('',(0.,0.,1.)); +#295695 = ORIENTED_EDGE('',*,*,#295696,.F.); +#295696 = EDGE_CURVE('',#295658,#295689,#295697,.T.); +#295697 = LINE('',#295698,#295699); +#295698 = CARTESIAN_POINT('',(140.098079,-87.519509,1.51)); +#295699 = VECTOR('',#295700,1.); +#295700 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#295701 = PLANE('',#295702); +#295702 = AXIS2_PLACEMENT_3D('',#295703,#295704,#295705); +#295703 = CARTESIAN_POINT('',(140.098079,-87.519509,1.51)); +#295704 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#295705 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#295706 = ADVANCED_FACE('',(#295707),#295732,.T.); +#295707 = FACE_BOUND('',#295708,.T.); +#295708 = EDGE_LOOP('',(#295709,#295710,#295718,#295726)); +#295709 = ORIENTED_EDGE('',*,*,#295688,.T.); +#295710 = ORIENTED_EDGE('',*,*,#295711,.T.); +#295711 = EDGE_CURVE('',#295681,#295712,#295714,.T.); +#295712 = VERTEX_POINT('',#295713); +#295713 = CARTESIAN_POINT('',(139.7695,-87.871921,1.545)); +#295714 = LINE('',#295715,#295716); +#295715 = CARTESIAN_POINT('',(140.083147,-87.555557,1.545)); +#295716 = VECTOR('',#295717,1.); +#295717 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#295718 = ORIENTED_EDGE('',*,*,#295719,.F.); +#295719 = EDGE_CURVE('',#295720,#295712,#295722,.T.); +#295720 = VERTEX_POINT('',#295721); +#295721 = CARTESIAN_POINT('',(139.7695,-87.871921,1.51)); +#295722 = LINE('',#295723,#295724); +#295723 = CARTESIAN_POINT('',(139.7695,-87.871921,1.51)); +#295724 = VECTOR('',#295725,1.); +#295725 = DIRECTION('',(0.,0.,1.)); +#295726 = ORIENTED_EDGE('',*,*,#295727,.F.); +#295727 = EDGE_CURVE('',#295689,#295720,#295728,.T.); +#295728 = LINE('',#295729,#295730); +#295729 = CARTESIAN_POINT('',(140.083147,-87.555557,1.51)); +#295730 = VECTOR('',#295731,1.); +#295731 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#295732 = PLANE('',#295733); +#295733 = AXIS2_PLACEMENT_3D('',#295734,#295735,#295736); +#295734 = CARTESIAN_POINT('',(140.083147,-87.555557,1.51)); +#295735 = DIRECTION('',(0.710149662328,-0.704050748948,0.)); +#295736 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#295737 = ADVANCED_FACE('',(#295738),#295763,.T.); +#295738 = FACE_BOUND('',#295739,.T.); +#295739 = EDGE_LOOP('',(#295740,#295741,#295749,#295757)); +#295740 = ORIENTED_EDGE('',*,*,#295719,.T.); +#295741 = ORIENTED_EDGE('',*,*,#295742,.T.); +#295742 = EDGE_CURVE('',#295712,#295743,#295745,.T.); +#295743 = VERTEX_POINT('',#295744); +#295744 = CARTESIAN_POINT('',(139.777164,-87.885195,1.545)); +#295745 = LINE('',#295746,#295747); +#295746 = CARTESIAN_POINT('',(139.7695,-87.871921,1.545)); +#295747 = VECTOR('',#295748,1.); +#295748 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#295749 = ORIENTED_EDGE('',*,*,#295750,.F.); +#295750 = EDGE_CURVE('',#295751,#295743,#295753,.T.); +#295751 = VERTEX_POINT('',#295752); +#295752 = CARTESIAN_POINT('',(139.777164,-87.885195,1.51)); +#295753 = LINE('',#295754,#295755); +#295754 = CARTESIAN_POINT('',(139.777164,-87.885195,1.51)); +#295755 = VECTOR('',#295756,1.); +#295756 = DIRECTION('',(0.,0.,1.)); +#295757 = ORIENTED_EDGE('',*,*,#295758,.F.); +#295758 = EDGE_CURVE('',#295720,#295751,#295759,.T.); +#295759 = LINE('',#295760,#295761); +#295760 = CARTESIAN_POINT('',(139.7695,-87.871921,1.51)); +#295761 = VECTOR('',#295762,1.); +#295762 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#295763 = PLANE('',#295764); +#295764 = AXIS2_PLACEMENT_3D('',#295765,#295766,#295767); +#295765 = CARTESIAN_POINT('',(139.7695,-87.871921,1.51)); +#295766 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#295767 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#295768 = ADVANCED_FACE('',(#295769),#295796,.T.); +#295769 = FACE_BOUND('',#295770,.T.); +#295770 = EDGE_LOOP('',(#295771,#295772,#295781,#295789)); +#295771 = ORIENTED_EDGE('',*,*,#295750,.T.); +#295772 = ORIENTED_EDGE('',*,*,#295773,.T.); +#295773 = EDGE_CURVE('',#295743,#295774,#295776,.T.); +#295774 = VERTEX_POINT('',#295775); +#295775 = CARTESIAN_POINT('',(139.614805,-87.722836,1.545)); +#295776 = CIRCLE('',#295777,0.299999934501); +#295777 = AXIS2_PLACEMENT_3D('',#295778,#295779,#295780); +#295778 = CARTESIAN_POINT('',(139.50000014059,-87.9999998594,1.545)); +#295779 = DIRECTION('',(0.,0.,-1.)); +#295780 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#295781 = ORIENTED_EDGE('',*,*,#295782,.F.); +#295782 = EDGE_CURVE('',#295783,#295774,#295785,.T.); +#295783 = VERTEX_POINT('',#295784); +#295784 = CARTESIAN_POINT('',(139.614805,-87.722836,1.51)); +#295785 = LINE('',#295786,#295787); +#295786 = CARTESIAN_POINT('',(139.614805,-87.722836,1.51)); +#295787 = VECTOR('',#295788,1.); +#295788 = DIRECTION('',(0.,0.,1.)); +#295789 = ORIENTED_EDGE('',*,*,#295790,.F.); +#295790 = EDGE_CURVE('',#295751,#295783,#295791,.T.); +#295791 = CIRCLE('',#295792,0.299999934501); +#295792 = AXIS2_PLACEMENT_3D('',#295793,#295794,#295795); +#295793 = CARTESIAN_POINT('',(139.50000014059,-87.9999998594,1.51)); +#295794 = DIRECTION('',(0.,0.,-1.)); +#295795 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#295796 = CYLINDRICAL_SURFACE('',#295797,0.299999934501); +#295797 = AXIS2_PLACEMENT_3D('',#295798,#295799,#295800); +#295798 = CARTESIAN_POINT('',(139.50000014059,-87.9999998594,1.51)); +#295799 = DIRECTION('',(0.,0.,-1.)); +#295800 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#295801 = ADVANCED_FACE('',(#295802),#295818,.T.); +#295802 = FACE_BOUND('',#295803,.T.); +#295803 = EDGE_LOOP('',(#295804,#295805,#295811,#295812)); +#295804 = ORIENTED_EDGE('',*,*,#295782,.T.); +#295805 = ORIENTED_EDGE('',*,*,#295806,.T.); +#295806 = EDGE_CURVE('',#295774,#295456,#295807,.T.); +#295807 = LINE('',#295808,#295809); +#295808 = CARTESIAN_POINT('',(139.614805,-87.722836,1.545)); +#295809 = VECTOR('',#295810,1.); +#295810 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#295811 = ORIENTED_EDGE('',*,*,#295453,.F.); +#295812 = ORIENTED_EDGE('',*,*,#295813,.F.); +#295813 = EDGE_CURVE('',#295783,#295454,#295814,.T.); +#295814 = LINE('',#295815,#295816); +#295815 = CARTESIAN_POINT('',(139.614805,-87.722836,1.51)); +#295816 = VECTOR('',#295817,1.); +#295817 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#295818 = PLANE('',#295819); +#295819 = AXIS2_PLACEMENT_3D('',#295820,#295821,#295822); +#295820 = CARTESIAN_POINT('',(139.614805,-87.722836,1.51)); +#295821 = DIRECTION('',(0.499991674902,0.866030210229,-0.)); +#295822 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#295823 = ADVANCED_FACE('',(#295824),#295851,.F.); +#295824 = FACE_BOUND('',#295825,.T.); +#295825 = EDGE_LOOP('',(#295826,#295836,#295843,#295844)); +#295826 = ORIENTED_EDGE('',*,*,#295827,.T.); +#295827 = EDGE_CURVE('',#295828,#295830,#295832,.T.); +#295828 = VERTEX_POINT('',#295829); +#295829 = CARTESIAN_POINT('',(139.637255,-88.,1.51)); +#295830 = VERTEX_POINT('',#295831); +#295831 = CARTESIAN_POINT('',(139.637255,-88.,1.545)); +#295832 = LINE('',#295833,#295834); +#295833 = CARTESIAN_POINT('',(139.637255,-88.,1.51)); +#295834 = VECTOR('',#295835,1.); +#295835 = DIRECTION('',(0.,0.,1.)); +#295836 = ORIENTED_EDGE('',*,*,#295837,.T.); +#295837 = EDGE_CURVE('',#295830,#295830,#295838,.T.); +#295838 = CIRCLE('',#295839,0.137255); +#295839 = AXIS2_PLACEMENT_3D('',#295840,#295841,#295842); +#295840 = CARTESIAN_POINT('',(139.5,-88.,1.545)); +#295841 = DIRECTION('',(0.,0.,1.)); +#295842 = DIRECTION('',(1.,0.,-0.)); +#295843 = ORIENTED_EDGE('',*,*,#295827,.F.); +#295844 = ORIENTED_EDGE('',*,*,#295845,.F.); +#295845 = EDGE_CURVE('',#295828,#295828,#295846,.T.); +#295846 = CIRCLE('',#295847,0.137255); +#295847 = AXIS2_PLACEMENT_3D('',#295848,#295849,#295850); +#295848 = CARTESIAN_POINT('',(139.5,-88.,1.51)); +#295849 = DIRECTION('',(0.,0.,1.)); +#295850 = DIRECTION('',(1.,0.,-0.)); +#295851 = CYLINDRICAL_SURFACE('',#295852,0.137255); +#295852 = AXIS2_PLACEMENT_3D('',#295853,#295854,#295855); +#295853 = CARTESIAN_POINT('',(139.5,-88.,1.51)); +#295854 = DIRECTION('',(-0.,-0.,-1.)); +#295855 = DIRECTION('',(1.,0.,-0.)); +#295856 = ADVANCED_FACE('',(#295857,#295871),#295874,.F.); +#295857 = FACE_BOUND('',#295858,.T.); +#295858 = EDGE_LOOP('',(#295859,#295860,#295861,#295862,#295863,#295864, + #295865,#295866,#295867,#295868,#295869,#295870)); +#295859 = ORIENTED_EDGE('',*,*,#295479,.T.); +#295860 = ORIENTED_EDGE('',*,*,#295510,.T.); +#295861 = ORIENTED_EDGE('',*,*,#295541,.T.); +#295862 = ORIENTED_EDGE('',*,*,#295572,.T.); +#295863 = ORIENTED_EDGE('',*,*,#295603,.T.); +#295864 = ORIENTED_EDGE('',*,*,#295634,.T.); +#295865 = ORIENTED_EDGE('',*,*,#295665,.T.); +#295866 = ORIENTED_EDGE('',*,*,#295696,.T.); +#295867 = ORIENTED_EDGE('',*,*,#295727,.T.); +#295868 = ORIENTED_EDGE('',*,*,#295758,.T.); +#295869 = ORIENTED_EDGE('',*,*,#295790,.T.); +#295870 = ORIENTED_EDGE('',*,*,#295813,.T.); +#295871 = FACE_BOUND('',#295872,.T.); +#295872 = EDGE_LOOP('',(#295873)); +#295873 = ORIENTED_EDGE('',*,*,#295845,.T.); +#295874 = PLANE('',#295875); +#295875 = AXIS2_PLACEMENT_3D('',#295876,#295877,#295878); +#295876 = CARTESIAN_POINT('',(0.,0.,1.51)); +#295877 = DIRECTION('',(0.,0.,1.)); +#295878 = DIRECTION('',(1.,0.,-0.)); +#295879 = ADVANCED_FACE('',(#295880,#295894),#295897,.T.); +#295880 = FACE_BOUND('',#295881,.F.); +#295881 = EDGE_LOOP('',(#295882,#295883,#295884,#295885,#295886,#295887, + #295888,#295889,#295890,#295891,#295892,#295893)); +#295882 = ORIENTED_EDGE('',*,*,#295463,.T.); +#295883 = ORIENTED_EDGE('',*,*,#295494,.T.); +#295884 = ORIENTED_EDGE('',*,*,#295525,.T.); +#295885 = ORIENTED_EDGE('',*,*,#295556,.T.); +#295886 = ORIENTED_EDGE('',*,*,#295587,.T.); +#295887 = ORIENTED_EDGE('',*,*,#295618,.T.); +#295888 = ORIENTED_EDGE('',*,*,#295649,.T.); +#295889 = ORIENTED_EDGE('',*,*,#295680,.T.); +#295890 = ORIENTED_EDGE('',*,*,#295711,.T.); +#295891 = ORIENTED_EDGE('',*,*,#295742,.T.); +#295892 = ORIENTED_EDGE('',*,*,#295773,.T.); +#295893 = ORIENTED_EDGE('',*,*,#295806,.T.); +#295894 = FACE_BOUND('',#295895,.F.); +#295895 = EDGE_LOOP('',(#295896)); +#295896 = ORIENTED_EDGE('',*,*,#295837,.T.); +#295897 = PLANE('',#295898); +#295898 = AXIS2_PLACEMENT_3D('',#295899,#295900,#295901); +#295899 = CARTESIAN_POINT('',(0.,0.,1.545)); +#295900 = DIRECTION('',(0.,0.,1.)); +#295901 = DIRECTION('',(1.,0.,-0.)); +#295902 = MANIFOLD_SOLID_BREP('',#295903); +#295903 = CLOSED_SHELL('',(#295904,#295937,#295970,#295982)); +#295904 = ADVANCED_FACE('',(#295905),#295932,.T.); +#295905 = FACE_BOUND('',#295906,.F.); +#295906 = EDGE_LOOP('',(#295907,#295917,#295924,#295925)); +#295907 = ORIENTED_EDGE('',*,*,#295908,.T.); +#295908 = EDGE_CURVE('',#295909,#295911,#295913,.T.); +#295909 = VERTEX_POINT('',#295910); +#295910 = CARTESIAN_POINT('',(139.9,-79.4,1.51)); +#295911 = VERTEX_POINT('',#295912); +#295912 = CARTESIAN_POINT('',(139.9,-79.4,1.545)); +#295913 = LINE('',#295914,#295915); +#295914 = CARTESIAN_POINT('',(139.9,-79.4,1.51)); +#295915 = VECTOR('',#295916,1.); +#295916 = DIRECTION('',(0.,0.,1.)); +#295917 = ORIENTED_EDGE('',*,*,#295918,.T.); +#295918 = EDGE_CURVE('',#295911,#295911,#295919,.T.); +#295919 = CIRCLE('',#295920,0.3); +#295920 = AXIS2_PLACEMENT_3D('',#295921,#295922,#295923); +#295921 = CARTESIAN_POINT('',(139.6,-79.4,1.545)); +#295922 = DIRECTION('',(0.,0.,1.)); +#295923 = DIRECTION('',(1.,0.,-0.)); +#295924 = ORIENTED_EDGE('',*,*,#295908,.F.); +#295925 = ORIENTED_EDGE('',*,*,#295926,.F.); +#295926 = EDGE_CURVE('',#295909,#295909,#295927,.T.); +#295927 = CIRCLE('',#295928,0.3); +#295928 = AXIS2_PLACEMENT_3D('',#295929,#295930,#295931); +#295929 = CARTESIAN_POINT('',(139.6,-79.4,1.51)); +#295930 = DIRECTION('',(0.,0.,1.)); +#295931 = DIRECTION('',(1.,0.,-0.)); +#295932 = CYLINDRICAL_SURFACE('',#295933,0.3); +#295933 = AXIS2_PLACEMENT_3D('',#295934,#295935,#295936); +#295934 = CARTESIAN_POINT('',(139.6,-79.4,1.51)); +#295935 = DIRECTION('',(-0.,-0.,-1.)); +#295936 = DIRECTION('',(1.,0.,-0.)); +#295937 = ADVANCED_FACE('',(#295938),#295965,.F.); +#295938 = FACE_BOUND('',#295939,.T.); +#295939 = EDGE_LOOP('',(#295940,#295950,#295957,#295958)); +#295940 = ORIENTED_EDGE('',*,*,#295941,.T.); +#295941 = EDGE_CURVE('',#295942,#295944,#295946,.T.); +#295942 = VERTEX_POINT('',#295943); +#295943 = CARTESIAN_POINT('',(139.737255,-79.4,1.51)); +#295944 = VERTEX_POINT('',#295945); +#295945 = CARTESIAN_POINT('',(139.737255,-79.4,1.545)); +#295946 = LINE('',#295947,#295948); +#295947 = CARTESIAN_POINT('',(139.737255,-79.4,1.51)); +#295948 = VECTOR('',#295949,1.); +#295949 = DIRECTION('',(0.,0.,1.)); +#295950 = ORIENTED_EDGE('',*,*,#295951,.T.); +#295951 = EDGE_CURVE('',#295944,#295944,#295952,.T.); +#295952 = CIRCLE('',#295953,0.137255); +#295953 = AXIS2_PLACEMENT_3D('',#295954,#295955,#295956); +#295954 = CARTESIAN_POINT('',(139.6,-79.4,1.545)); +#295955 = DIRECTION('',(0.,0.,1.)); +#295956 = DIRECTION('',(1.,0.,-0.)); +#295957 = ORIENTED_EDGE('',*,*,#295941,.F.); +#295958 = ORIENTED_EDGE('',*,*,#295959,.F.); +#295959 = EDGE_CURVE('',#295942,#295942,#295960,.T.); +#295960 = CIRCLE('',#295961,0.137255); +#295961 = AXIS2_PLACEMENT_3D('',#295962,#295963,#295964); +#295962 = CARTESIAN_POINT('',(139.6,-79.4,1.51)); +#295963 = DIRECTION('',(0.,0.,1.)); +#295964 = DIRECTION('',(1.,0.,-0.)); +#295965 = CYLINDRICAL_SURFACE('',#295966,0.137255); +#295966 = AXIS2_PLACEMENT_3D('',#295967,#295968,#295969); +#295967 = CARTESIAN_POINT('',(139.6,-79.4,1.51)); +#295968 = DIRECTION('',(-0.,-0.,-1.)); +#295969 = DIRECTION('',(1.,0.,-0.)); +#295970 = ADVANCED_FACE('',(#295971,#295974),#295977,.F.); +#295971 = FACE_BOUND('',#295972,.F.); +#295972 = EDGE_LOOP('',(#295973)); +#295973 = ORIENTED_EDGE('',*,*,#295926,.T.); +#295974 = FACE_BOUND('',#295975,.T.); +#295975 = EDGE_LOOP('',(#295976)); +#295976 = ORIENTED_EDGE('',*,*,#295959,.T.); +#295977 = PLANE('',#295978); +#295978 = AXIS2_PLACEMENT_3D('',#295979,#295980,#295981); +#295979 = CARTESIAN_POINT('',(0.,0.,1.51)); +#295980 = DIRECTION('',(0.,0.,1.)); +#295981 = DIRECTION('',(1.,0.,-0.)); +#295982 = ADVANCED_FACE('',(#295983,#295986),#295989,.T.); +#295983 = FACE_BOUND('',#295984,.T.); +#295984 = EDGE_LOOP('',(#295985)); +#295985 = ORIENTED_EDGE('',*,*,#295918,.T.); +#295986 = FACE_BOUND('',#295987,.F.); +#295987 = EDGE_LOOP('',(#295988)); +#295988 = ORIENTED_EDGE('',*,*,#295951,.T.); +#295989 = PLANE('',#295990); +#295990 = AXIS2_PLACEMENT_3D('',#295991,#295992,#295993); +#295991 = CARTESIAN_POINT('',(0.,0.,1.545)); +#295992 = DIRECTION('',(0.,0.,1.)); +#295993 = DIRECTION('',(1.,0.,-0.)); +#295994 = MANIFOLD_SOLID_BREP('',#295995); +#295995 = CLOSED_SHELL('',(#295996,#296029,#296062,#296074)); +#295996 = ADVANCED_FACE('',(#295997),#296024,.T.); +#295997 = FACE_BOUND('',#295998,.F.); +#295998 = EDGE_LOOP('',(#295999,#296009,#296016,#296017)); +#295999 = ORIENTED_EDGE('',*,*,#296000,.T.); +#296000 = EDGE_CURVE('',#296001,#296003,#296005,.T.); +#296001 = VERTEX_POINT('',#296002); +#296002 = CARTESIAN_POINT('',(143.9,-77.2,1.51)); +#296003 = VERTEX_POINT('',#296004); +#296004 = CARTESIAN_POINT('',(143.9,-77.2,1.545)); +#296005 = LINE('',#296006,#296007); +#296006 = CARTESIAN_POINT('',(143.9,-77.2,1.51)); +#296007 = VECTOR('',#296008,1.); +#296008 = DIRECTION('',(0.,0.,1.)); +#296009 = ORIENTED_EDGE('',*,*,#296010,.T.); +#296010 = EDGE_CURVE('',#296003,#296003,#296011,.T.); +#296011 = CIRCLE('',#296012,0.3); +#296012 = AXIS2_PLACEMENT_3D('',#296013,#296014,#296015); +#296013 = CARTESIAN_POINT('',(143.6,-77.2,1.545)); +#296014 = DIRECTION('',(0.,0.,1.)); +#296015 = DIRECTION('',(1.,0.,-0.)); +#296016 = ORIENTED_EDGE('',*,*,#296000,.F.); +#296017 = ORIENTED_EDGE('',*,*,#296018,.F.); +#296018 = EDGE_CURVE('',#296001,#296001,#296019,.T.); +#296019 = CIRCLE('',#296020,0.3); +#296020 = AXIS2_PLACEMENT_3D('',#296021,#296022,#296023); +#296021 = CARTESIAN_POINT('',(143.6,-77.2,1.51)); +#296022 = DIRECTION('',(0.,0.,1.)); +#296023 = DIRECTION('',(1.,0.,-0.)); +#296024 = CYLINDRICAL_SURFACE('',#296025,0.3); +#296025 = AXIS2_PLACEMENT_3D('',#296026,#296027,#296028); +#296026 = CARTESIAN_POINT('',(143.6,-77.2,1.51)); +#296027 = DIRECTION('',(-0.,-0.,-1.)); +#296028 = DIRECTION('',(1.,0.,-0.)); +#296029 = ADVANCED_FACE('',(#296030),#296057,.F.); +#296030 = FACE_BOUND('',#296031,.T.); +#296031 = EDGE_LOOP('',(#296032,#296042,#296049,#296050)); +#296032 = ORIENTED_EDGE('',*,*,#296033,.T.); +#296033 = EDGE_CURVE('',#296034,#296036,#296038,.T.); +#296034 = VERTEX_POINT('',#296035); +#296035 = CARTESIAN_POINT('',(143.737255,-77.2,1.51)); +#296036 = VERTEX_POINT('',#296037); +#296037 = CARTESIAN_POINT('',(143.737255,-77.2,1.545)); +#296038 = LINE('',#296039,#296040); +#296039 = CARTESIAN_POINT('',(143.737255,-77.2,1.51)); +#296040 = VECTOR('',#296041,1.); +#296041 = DIRECTION('',(0.,0.,1.)); +#296042 = ORIENTED_EDGE('',*,*,#296043,.T.); +#296043 = EDGE_CURVE('',#296036,#296036,#296044,.T.); +#296044 = CIRCLE('',#296045,0.137255); +#296045 = AXIS2_PLACEMENT_3D('',#296046,#296047,#296048); +#296046 = CARTESIAN_POINT('',(143.6,-77.2,1.545)); +#296047 = DIRECTION('',(0.,0.,1.)); +#296048 = DIRECTION('',(1.,0.,-0.)); +#296049 = ORIENTED_EDGE('',*,*,#296033,.F.); +#296050 = ORIENTED_EDGE('',*,*,#296051,.F.); +#296051 = EDGE_CURVE('',#296034,#296034,#296052,.T.); +#296052 = CIRCLE('',#296053,0.137255); +#296053 = AXIS2_PLACEMENT_3D('',#296054,#296055,#296056); +#296054 = CARTESIAN_POINT('',(143.6,-77.2,1.51)); +#296055 = DIRECTION('',(0.,0.,1.)); +#296056 = DIRECTION('',(1.,0.,-0.)); +#296057 = CYLINDRICAL_SURFACE('',#296058,0.137255); +#296058 = AXIS2_PLACEMENT_3D('',#296059,#296060,#296061); +#296059 = CARTESIAN_POINT('',(143.6,-77.2,1.51)); +#296060 = DIRECTION('',(-0.,-0.,-1.)); +#296061 = DIRECTION('',(1.,0.,-0.)); +#296062 = ADVANCED_FACE('',(#296063,#296066),#296069,.F.); +#296063 = FACE_BOUND('',#296064,.F.); +#296064 = EDGE_LOOP('',(#296065)); +#296065 = ORIENTED_EDGE('',*,*,#296018,.T.); +#296066 = FACE_BOUND('',#296067,.T.); +#296067 = EDGE_LOOP('',(#296068)); +#296068 = ORIENTED_EDGE('',*,*,#296051,.T.); +#296069 = PLANE('',#296070); +#296070 = AXIS2_PLACEMENT_3D('',#296071,#296072,#296073); +#296071 = CARTESIAN_POINT('',(0.,0.,1.51)); +#296072 = DIRECTION('',(0.,0.,1.)); +#296073 = DIRECTION('',(1.,0.,-0.)); +#296074 = ADVANCED_FACE('',(#296075,#296078),#296081,.T.); +#296075 = FACE_BOUND('',#296076,.T.); +#296076 = EDGE_LOOP('',(#296077)); +#296077 = ORIENTED_EDGE('',*,*,#296010,.T.); +#296078 = FACE_BOUND('',#296079,.F.); +#296079 = EDGE_LOOP('',(#296080)); +#296080 = ORIENTED_EDGE('',*,*,#296043,.T.); +#296081 = PLANE('',#296082); +#296082 = AXIS2_PLACEMENT_3D('',#296083,#296084,#296085); +#296083 = CARTESIAN_POINT('',(0.,0.,1.545)); +#296084 = DIRECTION('',(0.,0.,1.)); +#296085 = DIRECTION('',(1.,0.,-0.)); +#296086 = MANIFOLD_SOLID_BREP('',#296087); +#296087 = CLOSED_SHELL('',(#296088,#296121,#296154,#296166)); +#296088 = ADVANCED_FACE('',(#296089),#296116,.T.); +#296089 = FACE_BOUND('',#296090,.F.); +#296090 = EDGE_LOOP('',(#296091,#296101,#296108,#296109)); +#296091 = ORIENTED_EDGE('',*,*,#296092,.T.); +#296092 = EDGE_CURVE('',#296093,#296095,#296097,.T.); +#296093 = VERTEX_POINT('',#296094); +#296094 = CARTESIAN_POINT('',(139.1,-75.6,1.51)); +#296095 = VERTEX_POINT('',#296096); +#296096 = CARTESIAN_POINT('',(139.1,-75.6,1.545)); +#296097 = LINE('',#296098,#296099); +#296098 = CARTESIAN_POINT('',(139.1,-75.6,1.51)); +#296099 = VECTOR('',#296100,1.); +#296100 = DIRECTION('',(0.,0.,1.)); +#296101 = ORIENTED_EDGE('',*,*,#296102,.T.); +#296102 = EDGE_CURVE('',#296095,#296095,#296103,.T.); +#296103 = CIRCLE('',#296104,0.3); +#296104 = AXIS2_PLACEMENT_3D('',#296105,#296106,#296107); +#296105 = CARTESIAN_POINT('',(138.8,-75.6,1.545)); +#296106 = DIRECTION('',(0.,0.,1.)); +#296107 = DIRECTION('',(1.,0.,-0.)); +#296108 = ORIENTED_EDGE('',*,*,#296092,.F.); +#296109 = ORIENTED_EDGE('',*,*,#296110,.F.); +#296110 = EDGE_CURVE('',#296093,#296093,#296111,.T.); +#296111 = CIRCLE('',#296112,0.3); +#296112 = AXIS2_PLACEMENT_3D('',#296113,#296114,#296115); +#296113 = CARTESIAN_POINT('',(138.8,-75.6,1.51)); +#296114 = DIRECTION('',(0.,0.,1.)); +#296115 = DIRECTION('',(1.,0.,-0.)); +#296116 = CYLINDRICAL_SURFACE('',#296117,0.3); +#296117 = AXIS2_PLACEMENT_3D('',#296118,#296119,#296120); +#296118 = CARTESIAN_POINT('',(138.8,-75.6,1.51)); +#296119 = DIRECTION('',(-0.,-0.,-1.)); +#296120 = DIRECTION('',(1.,0.,-0.)); +#296121 = ADVANCED_FACE('',(#296122),#296149,.F.); +#296122 = FACE_BOUND('',#296123,.T.); +#296123 = EDGE_LOOP('',(#296124,#296134,#296141,#296142)); +#296124 = ORIENTED_EDGE('',*,*,#296125,.T.); +#296125 = EDGE_CURVE('',#296126,#296128,#296130,.T.); +#296126 = VERTEX_POINT('',#296127); +#296127 = CARTESIAN_POINT('',(138.937255,-75.6,1.51)); +#296128 = VERTEX_POINT('',#296129); +#296129 = CARTESIAN_POINT('',(138.937255,-75.6,1.545)); +#296130 = LINE('',#296131,#296132); +#296131 = CARTESIAN_POINT('',(138.937255,-75.6,1.51)); +#296132 = VECTOR('',#296133,1.); +#296133 = DIRECTION('',(0.,0.,1.)); +#296134 = ORIENTED_EDGE('',*,*,#296135,.T.); +#296135 = EDGE_CURVE('',#296128,#296128,#296136,.T.); +#296136 = CIRCLE('',#296137,0.137255); +#296137 = AXIS2_PLACEMENT_3D('',#296138,#296139,#296140); +#296138 = CARTESIAN_POINT('',(138.8,-75.6,1.545)); +#296139 = DIRECTION('',(0.,0.,1.)); +#296140 = DIRECTION('',(1.,0.,-0.)); +#296141 = ORIENTED_EDGE('',*,*,#296125,.F.); +#296142 = ORIENTED_EDGE('',*,*,#296143,.F.); +#296143 = EDGE_CURVE('',#296126,#296126,#296144,.T.); +#296144 = CIRCLE('',#296145,0.137255); +#296145 = AXIS2_PLACEMENT_3D('',#296146,#296147,#296148); +#296146 = CARTESIAN_POINT('',(138.8,-75.6,1.51)); +#296147 = DIRECTION('',(0.,0.,1.)); +#296148 = DIRECTION('',(1.,0.,-0.)); +#296149 = CYLINDRICAL_SURFACE('',#296150,0.137255); +#296150 = AXIS2_PLACEMENT_3D('',#296151,#296152,#296153); +#296151 = CARTESIAN_POINT('',(138.8,-75.6,1.51)); +#296152 = DIRECTION('',(-0.,-0.,-1.)); +#296153 = DIRECTION('',(1.,0.,-0.)); +#296154 = ADVANCED_FACE('',(#296155,#296158),#296161,.F.); +#296155 = FACE_BOUND('',#296156,.F.); +#296156 = EDGE_LOOP('',(#296157)); +#296157 = ORIENTED_EDGE('',*,*,#296110,.T.); +#296158 = FACE_BOUND('',#296159,.T.); +#296159 = EDGE_LOOP('',(#296160)); +#296160 = ORIENTED_EDGE('',*,*,#296143,.T.); +#296161 = PLANE('',#296162); +#296162 = AXIS2_PLACEMENT_3D('',#296163,#296164,#296165); +#296163 = CARTESIAN_POINT('',(0.,0.,1.51)); +#296164 = DIRECTION('',(0.,0.,1.)); +#296165 = DIRECTION('',(1.,0.,-0.)); +#296166 = ADVANCED_FACE('',(#296167,#296170),#296173,.T.); +#296167 = FACE_BOUND('',#296168,.T.); +#296168 = EDGE_LOOP('',(#296169)); +#296169 = ORIENTED_EDGE('',*,*,#296102,.T.); +#296170 = FACE_BOUND('',#296171,.F.); +#296171 = EDGE_LOOP('',(#296172)); +#296172 = ORIENTED_EDGE('',*,*,#296135,.T.); +#296173 = PLANE('',#296174); +#296174 = AXIS2_PLACEMENT_3D('',#296175,#296176,#296177); +#296175 = CARTESIAN_POINT('',(0.,0.,1.545)); +#296176 = DIRECTION('',(0.,0.,1.)); +#296177 = DIRECTION('',(1.,0.,-0.)); +#296178 = MANIFOLD_SOLID_BREP('',#296179); +#296179 = CLOSED_SHELL('',(#296180,#296222,#296253,#296284,#296317, + #296348,#296379,#296410,#296441,#296474,#296505,#296536,#296567, + #296598,#296629,#296662,#296693,#296724,#296755,#296788,#296819, + #296850,#296881,#296914,#296936,#296969,#297004)); +#296180 = ADVANCED_FACE('',(#296181),#296217,.T.); +#296181 = FACE_BOUND('',#296182,.T.); +#296182 = EDGE_LOOP('',(#296183,#296193,#296202,#296210)); +#296183 = ORIENTED_EDGE('',*,*,#296184,.T.); +#296184 = EDGE_CURVE('',#296185,#296187,#296189,.T.); +#296185 = VERTEX_POINT('',#296186); +#296186 = CARTESIAN_POINT('',(135.001921,-70.950491,1.51)); +#296187 = VERTEX_POINT('',#296188); +#296188 = CARTESIAN_POINT('',(135.001921,-70.950491,1.545)); +#296189 = LINE('',#296190,#296191); +#296190 = CARTESIAN_POINT('',(135.001921,-70.950491,1.51)); +#296191 = VECTOR('',#296192,1.); +#296192 = DIRECTION('',(0.,0.,1.)); +#296193 = ORIENTED_EDGE('',*,*,#296194,.T.); +#296194 = EDGE_CURVE('',#296187,#296195,#296197,.T.); +#296195 = VERTEX_POINT('',#296196); +#296196 = CARTESIAN_POINT('',(135.080491,-70.871921,1.545)); +#296197 = CIRCLE('',#296198,0.100002891901); +#296198 = AXIS2_PLACEMENT_3D('',#296199,#296200,#296201); +#296199 = CARTESIAN_POINT('',(135.10000207103,-70.97000207103,1.545)); +#296200 = DIRECTION('',(0.,0.,-1.)); +#296201 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#296202 = ORIENTED_EDGE('',*,*,#296203,.F.); +#296203 = EDGE_CURVE('',#296204,#296195,#296206,.T.); +#296204 = VERTEX_POINT('',#296205); +#296205 = CARTESIAN_POINT('',(135.080491,-70.871921,1.51)); +#296206 = LINE('',#296207,#296208); +#296207 = CARTESIAN_POINT('',(135.080491,-70.871921,1.51)); +#296208 = VECTOR('',#296209,1.); +#296209 = DIRECTION('',(0.,0.,1.)); +#296210 = ORIENTED_EDGE('',*,*,#296211,.F.); +#296211 = EDGE_CURVE('',#296185,#296204,#296212,.T.); +#296212 = CIRCLE('',#296213,0.100002891901); +#296213 = AXIS2_PLACEMENT_3D('',#296214,#296215,#296216); +#296214 = CARTESIAN_POINT('',(135.10000207103,-70.97000207103,1.51)); +#296215 = DIRECTION('',(0.,0.,-1.)); +#296216 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#296217 = CYLINDRICAL_SURFACE('',#296218,0.100002891901); +#296218 = AXIS2_PLACEMENT_3D('',#296219,#296220,#296221); +#296219 = CARTESIAN_POINT('',(135.10000207103,-70.97000207103,1.51)); +#296220 = DIRECTION('',(0.,0.,-1.)); +#296221 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#296222 = ADVANCED_FACE('',(#296223),#296248,.T.); +#296223 = FACE_BOUND('',#296224,.T.); +#296224 = EDGE_LOOP('',(#296225,#296226,#296234,#296242)); +#296225 = ORIENTED_EDGE('',*,*,#296203,.T.); +#296226 = ORIENTED_EDGE('',*,*,#296227,.T.); +#296227 = EDGE_CURVE('',#296195,#296228,#296230,.T.); +#296228 = VERTEX_POINT('',#296229); +#296229 = CARTESIAN_POINT('',(136.5,-70.87,1.545)); +#296230 = LINE('',#296231,#296232); +#296231 = CARTESIAN_POINT('',(135.080491,-70.871921,1.545)); +#296232 = VECTOR('',#296233,1.); +#296233 = DIRECTION('',(0.999999084311,1.353283593805E-03,0.)); +#296234 = ORIENTED_EDGE('',*,*,#296235,.F.); +#296235 = EDGE_CURVE('',#296236,#296228,#296238,.T.); +#296236 = VERTEX_POINT('',#296237); +#296237 = CARTESIAN_POINT('',(136.5,-70.87,1.51)); +#296238 = LINE('',#296239,#296240); +#296239 = CARTESIAN_POINT('',(136.5,-70.87,1.51)); +#296240 = VECTOR('',#296241,1.); +#296241 = DIRECTION('',(0.,0.,1.)); +#296242 = ORIENTED_EDGE('',*,*,#296243,.F.); +#296243 = EDGE_CURVE('',#296204,#296236,#296244,.T.); +#296244 = LINE('',#296245,#296246); +#296245 = CARTESIAN_POINT('',(135.080491,-70.871921,1.51)); +#296246 = VECTOR('',#296247,1.); +#296247 = DIRECTION('',(0.999999084311,1.353283593805E-03,0.)); +#296248 = PLANE('',#296249); +#296249 = AXIS2_PLACEMENT_3D('',#296250,#296251,#296252); +#296250 = CARTESIAN_POINT('',(135.080491,-70.871921,1.51)); +#296251 = DIRECTION('',(-1.353283593805E-03,0.999999084311,0.)); +#296252 = DIRECTION('',(0.999999084311,1.353283593805E-03,0.)); +#296253 = ADVANCED_FACE('',(#296254),#296279,.T.); +#296254 = FACE_BOUND('',#296255,.T.); +#296255 = EDGE_LOOP('',(#296256,#296257,#296265,#296273)); +#296256 = ORIENTED_EDGE('',*,*,#296235,.T.); +#296257 = ORIENTED_EDGE('',*,*,#296258,.T.); +#296258 = EDGE_CURVE('',#296228,#296259,#296261,.T.); +#296259 = VERTEX_POINT('',#296260); +#296260 = CARTESIAN_POINT('',(137.919509,-70.871921,1.545)); +#296261 = LINE('',#296262,#296263); +#296262 = CARTESIAN_POINT('',(136.5,-70.87,1.545)); +#296263 = VECTOR('',#296264,1.); +#296264 = DIRECTION('',(0.999999084311,-1.353283593805E-03,0.)); +#296265 = ORIENTED_EDGE('',*,*,#296266,.F.); +#296266 = EDGE_CURVE('',#296267,#296259,#296269,.T.); +#296267 = VERTEX_POINT('',#296268); +#296268 = CARTESIAN_POINT('',(137.919509,-70.871921,1.51)); +#296269 = LINE('',#296270,#296271); +#296270 = CARTESIAN_POINT('',(137.919509,-70.871921,1.51)); +#296271 = VECTOR('',#296272,1.); +#296272 = DIRECTION('',(0.,0.,1.)); +#296273 = ORIENTED_EDGE('',*,*,#296274,.F.); +#296274 = EDGE_CURVE('',#296236,#296267,#296275,.T.); +#296275 = LINE('',#296276,#296277); +#296276 = CARTESIAN_POINT('',(136.5,-70.87,1.51)); +#296277 = VECTOR('',#296278,1.); +#296278 = DIRECTION('',(0.999999084311,-1.353283593805E-03,0.)); +#296279 = PLANE('',#296280); +#296280 = AXIS2_PLACEMENT_3D('',#296281,#296282,#296283); +#296281 = CARTESIAN_POINT('',(136.5,-70.87,1.51)); +#296282 = DIRECTION('',(1.353283593805E-03,0.999999084311,-0.)); +#296283 = DIRECTION('',(0.999999084311,-1.353283593805E-03,0.)); +#296284 = ADVANCED_FACE('',(#296285),#296312,.T.); +#296285 = FACE_BOUND('',#296286,.T.); +#296286 = EDGE_LOOP('',(#296287,#296288,#296297,#296305)); +#296287 = ORIENTED_EDGE('',*,*,#296266,.T.); +#296288 = ORIENTED_EDGE('',*,*,#296289,.T.); +#296289 = EDGE_CURVE('',#296259,#296290,#296292,.T.); +#296290 = VERTEX_POINT('',#296291); +#296291 = CARTESIAN_POINT('',(137.998079,-70.950491,1.545)); +#296292 = CIRCLE('',#296293,0.100002891901); +#296293 = AXIS2_PLACEMENT_3D('',#296294,#296295,#296296); +#296294 = CARTESIAN_POINT('',(137.89999792896,-70.97000207103,1.545)); +#296295 = DIRECTION('',(0.,0.,-1.)); +#296296 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#296297 = ORIENTED_EDGE('',*,*,#296298,.F.); +#296298 = EDGE_CURVE('',#296299,#296290,#296301,.T.); +#296299 = VERTEX_POINT('',#296300); +#296300 = CARTESIAN_POINT('',(137.998079,-70.950491,1.51)); +#296301 = LINE('',#296302,#296303); +#296302 = CARTESIAN_POINT('',(137.998079,-70.950491,1.51)); +#296303 = VECTOR('',#296304,1.); +#296304 = DIRECTION('',(0.,0.,1.)); +#296305 = ORIENTED_EDGE('',*,*,#296306,.F.); +#296306 = EDGE_CURVE('',#296267,#296299,#296307,.T.); +#296307 = CIRCLE('',#296308,0.100002891901); +#296308 = AXIS2_PLACEMENT_3D('',#296309,#296310,#296311); +#296309 = CARTESIAN_POINT('',(137.89999792896,-70.97000207103,1.51)); +#296310 = DIRECTION('',(0.,0.,-1.)); +#296311 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#296312 = CYLINDRICAL_SURFACE('',#296313,0.100002891901); +#296313 = AXIS2_PLACEMENT_3D('',#296314,#296315,#296316); +#296314 = CARTESIAN_POINT('',(137.89999792896,-70.97000207103,1.51)); +#296315 = DIRECTION('',(0.,0.,-1.)); +#296316 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#296317 = ADVANCED_FACE('',(#296318),#296343,.T.); +#296318 = FACE_BOUND('',#296319,.T.); +#296319 = EDGE_LOOP('',(#296320,#296321,#296329,#296337)); +#296320 = ORIENTED_EDGE('',*,*,#296298,.T.); +#296321 = ORIENTED_EDGE('',*,*,#296322,.T.); +#296322 = EDGE_CURVE('',#296290,#296323,#296325,.T.); +#296323 = VERTEX_POINT('',#296324); +#296324 = CARTESIAN_POINT('',(138.,-72.27,1.545)); +#296325 = LINE('',#296326,#296327); +#296326 = CARTESIAN_POINT('',(137.998079,-70.950491,1.545)); +#296327 = VECTOR('',#296328,1.); +#296328 = DIRECTION('',(1.455843017554E-03,-0.99999894026,0.)); +#296329 = ORIENTED_EDGE('',*,*,#296330,.F.); +#296330 = EDGE_CURVE('',#296331,#296323,#296333,.T.); +#296331 = VERTEX_POINT('',#296332); +#296332 = CARTESIAN_POINT('',(138.,-72.27,1.51)); +#296333 = LINE('',#296334,#296335); +#296334 = CARTESIAN_POINT('',(138.,-72.27,1.51)); +#296335 = VECTOR('',#296336,1.); +#296336 = DIRECTION('',(0.,0.,1.)); +#296337 = ORIENTED_EDGE('',*,*,#296338,.F.); +#296338 = EDGE_CURVE('',#296299,#296331,#296339,.T.); +#296339 = LINE('',#296340,#296341); +#296340 = CARTESIAN_POINT('',(137.998079,-70.950491,1.51)); +#296341 = VECTOR('',#296342,1.); +#296342 = DIRECTION('',(1.455843017554E-03,-0.99999894026,0.)); +#296343 = PLANE('',#296344); +#296344 = AXIS2_PLACEMENT_3D('',#296345,#296346,#296347); +#296345 = CARTESIAN_POINT('',(137.998079,-70.950491,1.51)); +#296346 = DIRECTION('',(0.99999894026,1.455843017554E-03,-0.)); +#296347 = DIRECTION('',(1.455843017554E-03,-0.99999894026,0.)); +#296348 = ADVANCED_FACE('',(#296349),#296374,.T.); +#296349 = FACE_BOUND('',#296350,.T.); +#296350 = EDGE_LOOP('',(#296351,#296352,#296360,#296368)); +#296351 = ORIENTED_EDGE('',*,*,#296330,.T.); +#296352 = ORIENTED_EDGE('',*,*,#296353,.T.); +#296353 = EDGE_CURVE('',#296323,#296354,#296356,.T.); +#296354 = VERTEX_POINT('',#296355); +#296355 = CARTESIAN_POINT('',(140.088578,-72.27,1.545)); +#296356 = LINE('',#296357,#296358); +#296357 = CARTESIAN_POINT('',(138.,-72.27,1.545)); +#296358 = VECTOR('',#296359,1.); +#296359 = DIRECTION('',(1.,0.,0.)); +#296360 = ORIENTED_EDGE('',*,*,#296361,.F.); +#296361 = EDGE_CURVE('',#296362,#296354,#296364,.T.); +#296362 = VERTEX_POINT('',#296363); +#296363 = CARTESIAN_POINT('',(140.088578,-72.27,1.51)); +#296364 = LINE('',#296365,#296366); +#296365 = CARTESIAN_POINT('',(140.088578,-72.27,1.51)); +#296366 = VECTOR('',#296367,1.); +#296367 = DIRECTION('',(0.,0.,1.)); +#296368 = ORIENTED_EDGE('',*,*,#296369,.F.); +#296369 = EDGE_CURVE('',#296331,#296362,#296370,.T.); +#296370 = LINE('',#296371,#296372); +#296371 = CARTESIAN_POINT('',(138.,-72.27,1.51)); +#296372 = VECTOR('',#296373,1.); +#296373 = DIRECTION('',(1.,0.,0.)); +#296374 = PLANE('',#296375); +#296375 = AXIS2_PLACEMENT_3D('',#296376,#296377,#296378); +#296376 = CARTESIAN_POINT('',(138.,-72.27,1.51)); +#296377 = DIRECTION('',(0.,1.,0.)); +#296378 = DIRECTION('',(1.,0.,0.)); +#296379 = ADVANCED_FACE('',(#296380),#296405,.T.); +#296380 = FACE_BOUND('',#296381,.T.); +#296381 = EDGE_LOOP('',(#296382,#296383,#296391,#296399)); +#296382 = ORIENTED_EDGE('',*,*,#296361,.T.); +#296383 = ORIENTED_EDGE('',*,*,#296384,.T.); +#296384 = EDGE_CURVE('',#296354,#296385,#296387,.T.); +#296385 = VERTEX_POINT('',#296386); +#296386 = CARTESIAN_POINT('',(140.430499,-71.928078,1.545)); +#296387 = LINE('',#296388,#296389); +#296388 = CARTESIAN_POINT('',(140.088578,-72.27,1.545)); +#296389 = VECTOR('',#296390,1.); +#296390 = DIRECTION('',(0.707105747167,0.707107815205,0.)); +#296391 = ORIENTED_EDGE('',*,*,#296392,.F.); +#296392 = EDGE_CURVE('',#296393,#296385,#296395,.T.); +#296393 = VERTEX_POINT('',#296394); +#296394 = CARTESIAN_POINT('',(140.430499,-71.928078,1.51)); +#296395 = LINE('',#296396,#296397); +#296396 = CARTESIAN_POINT('',(140.430499,-71.928078,1.51)); +#296397 = VECTOR('',#296398,1.); +#296398 = DIRECTION('',(0.,0.,1.)); +#296399 = ORIENTED_EDGE('',*,*,#296400,.F.); +#296400 = EDGE_CURVE('',#296362,#296393,#296401,.T.); +#296401 = LINE('',#296402,#296403); +#296402 = CARTESIAN_POINT('',(140.088578,-72.27,1.51)); +#296403 = VECTOR('',#296404,1.); +#296404 = DIRECTION('',(0.707105747167,0.707107815205,0.)); +#296405 = PLANE('',#296406); +#296406 = AXIS2_PLACEMENT_3D('',#296407,#296408,#296409); +#296407 = CARTESIAN_POINT('',(140.088578,-72.27,1.51)); +#296408 = DIRECTION('',(-0.707107815205,0.707105747167,0.)); +#296409 = DIRECTION('',(0.707105747167,0.707107815205,0.)); +#296410 = ADVANCED_FACE('',(#296411),#296436,.T.); +#296411 = FACE_BOUND('',#296412,.T.); +#296412 = EDGE_LOOP('',(#296413,#296414,#296422,#296430)); +#296413 = ORIENTED_EDGE('',*,*,#296392,.T.); +#296414 = ORIENTED_EDGE('',*,*,#296415,.T.); +#296415 = EDGE_CURVE('',#296385,#296416,#296418,.T.); +#296416 = VERTEX_POINT('',#296417); +#296417 = CARTESIAN_POINT('',(140.422836,-71.914805,1.545)); +#296418 = LINE('',#296419,#296420); +#296419 = CARTESIAN_POINT('',(140.430499,-71.928078,1.545)); +#296420 = VECTOR('',#296421,1.); +#296421 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#296422 = ORIENTED_EDGE('',*,*,#296423,.F.); +#296423 = EDGE_CURVE('',#296424,#296416,#296426,.T.); +#296424 = VERTEX_POINT('',#296425); +#296425 = CARTESIAN_POINT('',(140.422836,-71.914805,1.51)); +#296426 = LINE('',#296427,#296428); +#296427 = CARTESIAN_POINT('',(140.422836,-71.914805,1.51)); +#296428 = VECTOR('',#296429,1.); +#296429 = DIRECTION('',(0.,0.,1.)); +#296430 = ORIENTED_EDGE('',*,*,#296431,.F.); +#296431 = EDGE_CURVE('',#296393,#296424,#296432,.T.); +#296432 = LINE('',#296433,#296434); +#296433 = CARTESIAN_POINT('',(140.430499,-71.928078,1.51)); +#296434 = VECTOR('',#296435,1.); +#296435 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#296436 = PLANE('',#296437); +#296437 = AXIS2_PLACEMENT_3D('',#296438,#296439,#296440); +#296438 = CARTESIAN_POINT('',(140.430499,-71.928078,1.51)); +#296439 = DIRECTION('',(-0.866030210228,-0.499991674903,0.)); +#296440 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#296441 = ADVANCED_FACE('',(#296442),#296469,.T.); +#296442 = FACE_BOUND('',#296443,.T.); +#296443 = EDGE_LOOP('',(#296444,#296445,#296454,#296462)); +#296444 = ORIENTED_EDGE('',*,*,#296423,.T.); +#296445 = ORIENTED_EDGE('',*,*,#296446,.T.); +#296446 = EDGE_CURVE('',#296416,#296447,#296449,.T.); +#296447 = VERTEX_POINT('',#296448); +#296448 = CARTESIAN_POINT('',(140.585195,-72.077164,1.545)); +#296449 = CIRCLE('',#296450,0.299999934501); +#296450 = AXIS2_PLACEMENT_3D('',#296451,#296452,#296453); +#296451 = CARTESIAN_POINT('',(140.6999998594,-71.80000014059,1.545)); +#296452 = DIRECTION('',(0.,-0.,-1.)); +#296453 = DIRECTION('',(-0.923879733049,-0.382682948223,0.)); +#296454 = ORIENTED_EDGE('',*,*,#296455,.F.); +#296455 = EDGE_CURVE('',#296456,#296447,#296458,.T.); +#296456 = VERTEX_POINT('',#296457); +#296457 = CARTESIAN_POINT('',(140.585195,-72.077164,1.51)); +#296458 = LINE('',#296459,#296460); +#296459 = CARTESIAN_POINT('',(140.585195,-72.077164,1.51)); +#296460 = VECTOR('',#296461,1.); +#296461 = DIRECTION('',(0.,0.,1.)); +#296462 = ORIENTED_EDGE('',*,*,#296463,.F.); +#296463 = EDGE_CURVE('',#296424,#296456,#296464,.T.); +#296464 = CIRCLE('',#296465,0.299999934501); +#296465 = AXIS2_PLACEMENT_3D('',#296466,#296467,#296468); +#296466 = CARTESIAN_POINT('',(140.6999998594,-71.80000014059,1.51)); +#296467 = DIRECTION('',(0.,-0.,-1.)); +#296468 = DIRECTION('',(-0.923879733049,-0.382682948223,0.)); +#296469 = CYLINDRICAL_SURFACE('',#296470,0.299999934501); +#296470 = AXIS2_PLACEMENT_3D('',#296471,#296472,#296473); +#296471 = CARTESIAN_POINT('',(140.6999998594,-71.80000014059,1.51)); +#296472 = DIRECTION('',(0.,-0.,-1.)); +#296473 = DIRECTION('',(-0.923879733049,-0.382682948223,0.)); +#296474 = ADVANCED_FACE('',(#296475),#296500,.T.); +#296475 = FACE_BOUND('',#296476,.T.); +#296476 = EDGE_LOOP('',(#296477,#296478,#296486,#296494)); +#296477 = ORIENTED_EDGE('',*,*,#296455,.T.); +#296478 = ORIENTED_EDGE('',*,*,#296479,.T.); +#296479 = EDGE_CURVE('',#296447,#296480,#296482,.T.); +#296480 = VERTEX_POINT('',#296481); +#296481 = CARTESIAN_POINT('',(140.571921,-72.0695,1.545)); +#296482 = LINE('',#296483,#296484); +#296483 = CARTESIAN_POINT('',(140.585195,-72.077164,1.545)); +#296484 = VECTOR('',#296485,1.); +#296485 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#296486 = ORIENTED_EDGE('',*,*,#296487,.F.); +#296487 = EDGE_CURVE('',#296488,#296480,#296490,.T.); +#296488 = VERTEX_POINT('',#296489); +#296489 = CARTESIAN_POINT('',(140.571921,-72.0695,1.51)); +#296490 = LINE('',#296491,#296492); +#296491 = CARTESIAN_POINT('',(140.571921,-72.0695,1.51)); +#296492 = VECTOR('',#296493,1.); +#296493 = DIRECTION('',(0.,0.,1.)); +#296494 = ORIENTED_EDGE('',*,*,#296495,.F.); +#296495 = EDGE_CURVE('',#296456,#296488,#296496,.T.); +#296496 = LINE('',#296497,#296498); +#296497 = CARTESIAN_POINT('',(140.585195,-72.077164,1.51)); +#296498 = VECTOR('',#296499,1.); +#296499 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#296500 = PLANE('',#296501); +#296501 = AXIS2_PLACEMENT_3D('',#296502,#296503,#296504); +#296502 = CARTESIAN_POINT('',(140.585195,-72.077164,1.51)); +#296503 = DIRECTION('',(-0.500012356405,-0.866018269693,0.)); +#296504 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#296505 = ADVANCED_FACE('',(#296506),#296531,.T.); +#296506 = FACE_BOUND('',#296507,.T.); +#296507 = EDGE_LOOP('',(#296508,#296509,#296517,#296525)); +#296508 = ORIENTED_EDGE('',*,*,#296487,.T.); +#296509 = ORIENTED_EDGE('',*,*,#296510,.T.); +#296510 = EDGE_CURVE('',#296480,#296511,#296513,.T.); +#296511 = VERTEX_POINT('',#296512); +#296512 = CARTESIAN_POINT('',(140.185557,-72.453147,1.545)); +#296513 = LINE('',#296514,#296515); +#296514 = CARTESIAN_POINT('',(140.571921,-72.0695,1.545)); +#296515 = VECTOR('',#296516,1.); +#296516 = DIRECTION('',(-0.709597404935,-0.704607353716,0.)); +#296517 = ORIENTED_EDGE('',*,*,#296518,.F.); +#296518 = EDGE_CURVE('',#296519,#296511,#296521,.T.); +#296519 = VERTEX_POINT('',#296520); +#296520 = CARTESIAN_POINT('',(140.185557,-72.453147,1.51)); +#296521 = LINE('',#296522,#296523); +#296522 = CARTESIAN_POINT('',(140.185557,-72.453147,1.51)); +#296523 = VECTOR('',#296524,1.); +#296524 = DIRECTION('',(0.,0.,1.)); +#296525 = ORIENTED_EDGE('',*,*,#296526,.F.); +#296526 = EDGE_CURVE('',#296488,#296519,#296527,.T.); +#296527 = LINE('',#296528,#296529); +#296528 = CARTESIAN_POINT('',(140.571921,-72.0695,1.51)); +#296529 = VECTOR('',#296530,1.); +#296530 = DIRECTION('',(-0.709597404935,-0.704607353716,0.)); +#296531 = PLANE('',#296532); +#296532 = AXIS2_PLACEMENT_3D('',#296533,#296534,#296535); +#296533 = CARTESIAN_POINT('',(140.571921,-72.0695,1.51)); +#296534 = DIRECTION('',(0.704607353716,-0.709597404935,0.)); +#296535 = DIRECTION('',(-0.709597404935,-0.704607353716,0.)); +#296536 = ADVANCED_FACE('',(#296537),#296562,.T.); +#296537 = FACE_BOUND('',#296538,.T.); +#296538 = EDGE_LOOP('',(#296539,#296540,#296548,#296556)); +#296539 = ORIENTED_EDGE('',*,*,#296518,.T.); +#296540 = ORIENTED_EDGE('',*,*,#296541,.T.); +#296541 = EDGE_CURVE('',#296511,#296542,#296544,.T.); +#296542 = VERTEX_POINT('',#296543); +#296543 = CARTESIAN_POINT('',(140.149509,-72.468079,1.545)); +#296544 = LINE('',#296545,#296546); +#296545 = CARTESIAN_POINT('',(140.185557,-72.453147,1.545)); +#296546 = VECTOR('',#296547,1.); +#296547 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#296548 = ORIENTED_EDGE('',*,*,#296549,.F.); +#296549 = EDGE_CURVE('',#296550,#296542,#296552,.T.); +#296550 = VERTEX_POINT('',#296551); +#296551 = CARTESIAN_POINT('',(140.149509,-72.468079,1.51)); +#296552 = LINE('',#296553,#296554); +#296553 = CARTESIAN_POINT('',(140.149509,-72.468079,1.51)); +#296554 = VECTOR('',#296555,1.); +#296555 = DIRECTION('',(0.,0.,1.)); +#296556 = ORIENTED_EDGE('',*,*,#296557,.F.); +#296557 = EDGE_CURVE('',#296519,#296550,#296558,.T.); +#296558 = LINE('',#296559,#296560); +#296559 = CARTESIAN_POINT('',(140.185557,-72.453147,1.51)); +#296560 = VECTOR('',#296561,1.); +#296561 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#296562 = PLANE('',#296563); +#296563 = AXIS2_PLACEMENT_3D('',#296564,#296565,#296566); +#296564 = CARTESIAN_POINT('',(140.185557,-72.453147,1.51)); +#296565 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#296566 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#296567 = ADVANCED_FACE('',(#296568),#296593,.T.); +#296568 = FACE_BOUND('',#296569,.T.); +#296569 = EDGE_LOOP('',(#296570,#296571,#296579,#296587)); +#296570 = ORIENTED_EDGE('',*,*,#296549,.T.); +#296571 = ORIENTED_EDGE('',*,*,#296572,.T.); +#296572 = EDGE_CURVE('',#296542,#296573,#296575,.T.); +#296573 = VERTEX_POINT('',#296574); +#296574 = CARTESIAN_POINT('',(138.,-72.47,1.545)); +#296575 = LINE('',#296576,#296577); +#296576 = CARTESIAN_POINT('',(140.149509,-72.468079,1.545)); +#296577 = VECTOR('',#296578,1.); +#296578 = DIRECTION('',(-0.999999600657,-8.936921096205E-04,0.)); +#296579 = ORIENTED_EDGE('',*,*,#296580,.F.); +#296580 = EDGE_CURVE('',#296581,#296573,#296583,.T.); +#296581 = VERTEX_POINT('',#296582); +#296582 = CARTESIAN_POINT('',(138.,-72.47,1.51)); +#296583 = LINE('',#296584,#296585); +#296584 = CARTESIAN_POINT('',(138.,-72.47,1.51)); +#296585 = VECTOR('',#296586,1.); +#296586 = DIRECTION('',(0.,0.,1.)); +#296587 = ORIENTED_EDGE('',*,*,#296588,.F.); +#296588 = EDGE_CURVE('',#296550,#296581,#296589,.T.); +#296589 = LINE('',#296590,#296591); +#296590 = CARTESIAN_POINT('',(140.149509,-72.468079,1.51)); +#296591 = VECTOR('',#296592,1.); +#296592 = DIRECTION('',(-0.999999600657,-8.936921096205E-04,0.)); +#296593 = PLANE('',#296594); +#296594 = AXIS2_PLACEMENT_3D('',#296595,#296596,#296597); +#296595 = CARTESIAN_POINT('',(140.149509,-72.468079,1.51)); +#296596 = DIRECTION('',(8.936921096205E-04,-0.999999600657,0.)); +#296597 = DIRECTION('',(-0.999999600657,-8.936921096205E-04,0.)); +#296598 = ADVANCED_FACE('',(#296599),#296624,.T.); +#296599 = FACE_BOUND('',#296600,.T.); +#296600 = EDGE_LOOP('',(#296601,#296602,#296610,#296618)); +#296601 = ORIENTED_EDGE('',*,*,#296580,.T.); +#296602 = ORIENTED_EDGE('',*,*,#296603,.T.); +#296603 = EDGE_CURVE('',#296573,#296604,#296606,.T.); +#296604 = VERTEX_POINT('',#296605); +#296605 = CARTESIAN_POINT('',(137.998079,-73.789509,1.545)); +#296606 = LINE('',#296607,#296608); +#296607 = CARTESIAN_POINT('',(138.,-72.47,1.545)); +#296608 = VECTOR('',#296609,1.); +#296609 = DIRECTION('',(-1.455843017554E-03,-0.99999894026,0.)); +#296610 = ORIENTED_EDGE('',*,*,#296611,.F.); +#296611 = EDGE_CURVE('',#296612,#296604,#296614,.T.); +#296612 = VERTEX_POINT('',#296613); +#296613 = CARTESIAN_POINT('',(137.998079,-73.789509,1.51)); +#296614 = LINE('',#296615,#296616); +#296615 = CARTESIAN_POINT('',(137.998079,-73.789509,1.51)); +#296616 = VECTOR('',#296617,1.); +#296617 = DIRECTION('',(0.,0.,1.)); +#296618 = ORIENTED_EDGE('',*,*,#296619,.F.); +#296619 = EDGE_CURVE('',#296581,#296612,#296620,.T.); +#296620 = LINE('',#296621,#296622); +#296621 = CARTESIAN_POINT('',(138.,-72.47,1.51)); +#296622 = VECTOR('',#296623,1.); +#296623 = DIRECTION('',(-1.455843017554E-03,-0.99999894026,0.)); +#296624 = PLANE('',#296625); +#296625 = AXIS2_PLACEMENT_3D('',#296626,#296627,#296628); +#296626 = CARTESIAN_POINT('',(138.,-72.47,1.51)); +#296627 = DIRECTION('',(0.99999894026,-1.455843017554E-03,0.)); +#296628 = DIRECTION('',(-1.455843017554E-03,-0.99999894026,0.)); +#296629 = ADVANCED_FACE('',(#296630),#296657,.T.); +#296630 = FACE_BOUND('',#296631,.T.); +#296631 = EDGE_LOOP('',(#296632,#296633,#296642,#296650)); +#296632 = ORIENTED_EDGE('',*,*,#296611,.T.); +#296633 = ORIENTED_EDGE('',*,*,#296634,.T.); +#296634 = EDGE_CURVE('',#296604,#296635,#296637,.T.); +#296635 = VERTEX_POINT('',#296636); +#296636 = CARTESIAN_POINT('',(137.801921,-73.789509,1.545)); +#296637 = CIRCLE('',#296638,0.100000456609); +#296638 = AXIS2_PLACEMENT_3D('',#296639,#296640,#296641); +#296639 = CARTESIAN_POINT('',(137.9,-73.77,1.545)); +#296640 = DIRECTION('',(-0.,0.,-1.)); +#296641 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296642 = ORIENTED_EDGE('',*,*,#296643,.F.); +#296643 = EDGE_CURVE('',#296644,#296635,#296646,.T.); +#296644 = VERTEX_POINT('',#296645); +#296645 = CARTESIAN_POINT('',(137.801921,-73.789509,1.51)); +#296646 = LINE('',#296647,#296648); +#296647 = CARTESIAN_POINT('',(137.801921,-73.789509,1.51)); +#296648 = VECTOR('',#296649,1.); +#296649 = DIRECTION('',(0.,0.,1.)); +#296650 = ORIENTED_EDGE('',*,*,#296651,.F.); +#296651 = EDGE_CURVE('',#296612,#296644,#296652,.T.); +#296652 = CIRCLE('',#296653,0.100000456609); +#296653 = AXIS2_PLACEMENT_3D('',#296654,#296655,#296656); +#296654 = CARTESIAN_POINT('',(137.9,-73.77,1.51)); +#296655 = DIRECTION('',(-0.,0.,-1.)); +#296656 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296657 = CYLINDRICAL_SURFACE('',#296658,0.100000456609); +#296658 = AXIS2_PLACEMENT_3D('',#296659,#296660,#296661); +#296659 = CARTESIAN_POINT('',(137.9,-73.77,1.51)); +#296660 = DIRECTION('',(-0.,0.,-1.)); +#296661 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296662 = ADVANCED_FACE('',(#296663),#296688,.T.); +#296663 = FACE_BOUND('',#296664,.T.); +#296664 = EDGE_LOOP('',(#296665,#296666,#296674,#296682)); +#296665 = ORIENTED_EDGE('',*,*,#296643,.T.); +#296666 = ORIENTED_EDGE('',*,*,#296667,.T.); +#296667 = EDGE_CURVE('',#296635,#296668,#296670,.T.); +#296668 = VERTEX_POINT('',#296669); +#296669 = CARTESIAN_POINT('',(137.8,-71.07,1.545)); +#296670 = LINE('',#296671,#296672); +#296671 = CARTESIAN_POINT('',(137.801921,-73.789509,1.545)); +#296672 = VECTOR('',#296673,1.); +#296673 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296674 = ORIENTED_EDGE('',*,*,#296675,.F.); +#296675 = EDGE_CURVE('',#296676,#296668,#296678,.T.); +#296676 = VERTEX_POINT('',#296677); +#296677 = CARTESIAN_POINT('',(137.8,-71.07,1.51)); +#296678 = LINE('',#296679,#296680); +#296679 = CARTESIAN_POINT('',(137.8,-71.07,1.51)); +#296680 = VECTOR('',#296681,1.); +#296681 = DIRECTION('',(0.,0.,1.)); +#296682 = ORIENTED_EDGE('',*,*,#296683,.F.); +#296683 = EDGE_CURVE('',#296644,#296676,#296684,.T.); +#296684 = LINE('',#296685,#296686); +#296685 = CARTESIAN_POINT('',(137.801921,-73.789509,1.51)); +#296686 = VECTOR('',#296687,1.); +#296687 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296688 = PLANE('',#296689); +#296689 = AXIS2_PLACEMENT_3D('',#296690,#296691,#296692); +#296690 = CARTESIAN_POINT('',(137.801921,-73.789509,1.51)); +#296691 = DIRECTION('',(-0.999999750515,-7.063773352917E-04,0.)); +#296692 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296693 = ADVANCED_FACE('',(#296694),#296719,.T.); +#296694 = FACE_BOUND('',#296695,.T.); +#296695 = EDGE_LOOP('',(#296696,#296697,#296705,#296713)); +#296696 = ORIENTED_EDGE('',*,*,#296675,.T.); +#296697 = ORIENTED_EDGE('',*,*,#296698,.T.); +#296698 = EDGE_CURVE('',#296668,#296699,#296701,.T.); +#296699 = VERTEX_POINT('',#296700); +#296700 = CARTESIAN_POINT('',(136.6,-71.07,1.545)); +#296701 = LINE('',#296702,#296703); +#296702 = CARTESIAN_POINT('',(137.8,-71.07,1.545)); +#296703 = VECTOR('',#296704,1.); +#296704 = DIRECTION('',(-1.,0.,0.)); +#296705 = ORIENTED_EDGE('',*,*,#296706,.F.); +#296706 = EDGE_CURVE('',#296707,#296699,#296709,.T.); +#296707 = VERTEX_POINT('',#296708); +#296708 = CARTESIAN_POINT('',(136.6,-71.07,1.51)); +#296709 = LINE('',#296710,#296711); +#296710 = CARTESIAN_POINT('',(136.6,-71.07,1.51)); +#296711 = VECTOR('',#296712,1.); +#296712 = DIRECTION('',(0.,0.,1.)); +#296713 = ORIENTED_EDGE('',*,*,#296714,.F.); +#296714 = EDGE_CURVE('',#296676,#296707,#296715,.T.); +#296715 = LINE('',#296716,#296717); +#296716 = CARTESIAN_POINT('',(137.8,-71.07,1.51)); +#296717 = VECTOR('',#296718,1.); +#296718 = DIRECTION('',(-1.,0.,0.)); +#296719 = PLANE('',#296720); +#296720 = AXIS2_PLACEMENT_3D('',#296721,#296722,#296723); +#296721 = CARTESIAN_POINT('',(137.8,-71.07,1.51)); +#296722 = DIRECTION('',(0.,-1.,0.)); +#296723 = DIRECTION('',(-1.,0.,0.)); +#296724 = ADVANCED_FACE('',(#296725),#296750,.T.); +#296725 = FACE_BOUND('',#296726,.T.); +#296726 = EDGE_LOOP('',(#296727,#296728,#296736,#296744)); +#296727 = ORIENTED_EDGE('',*,*,#296706,.T.); +#296728 = ORIENTED_EDGE('',*,*,#296729,.T.); +#296729 = EDGE_CURVE('',#296699,#296730,#296732,.T.); +#296730 = VERTEX_POINT('',#296731); +#296731 = CARTESIAN_POINT('',(136.598079,-73.789509,1.545)); +#296732 = LINE('',#296733,#296734); +#296733 = CARTESIAN_POINT('',(136.6,-71.07,1.545)); +#296734 = VECTOR('',#296735,1.); +#296735 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296736 = ORIENTED_EDGE('',*,*,#296737,.F.); +#296737 = EDGE_CURVE('',#296738,#296730,#296740,.T.); +#296738 = VERTEX_POINT('',#296739); +#296739 = CARTESIAN_POINT('',(136.598079,-73.789509,1.51)); +#296740 = LINE('',#296741,#296742); +#296741 = CARTESIAN_POINT('',(136.598079,-73.789509,1.51)); +#296742 = VECTOR('',#296743,1.); +#296743 = DIRECTION('',(0.,0.,1.)); +#296744 = ORIENTED_EDGE('',*,*,#296745,.F.); +#296745 = EDGE_CURVE('',#296707,#296738,#296746,.T.); +#296746 = LINE('',#296747,#296748); +#296747 = CARTESIAN_POINT('',(136.6,-71.07,1.51)); +#296748 = VECTOR('',#296749,1.); +#296749 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296750 = PLANE('',#296751); +#296751 = AXIS2_PLACEMENT_3D('',#296752,#296753,#296754); +#296752 = CARTESIAN_POINT('',(136.6,-71.07,1.51)); +#296753 = DIRECTION('',(0.999999750515,-7.063773352917E-04,0.)); +#296754 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296755 = ADVANCED_FACE('',(#296756),#296783,.T.); +#296756 = FACE_BOUND('',#296757,.T.); +#296757 = EDGE_LOOP('',(#296758,#296759,#296768,#296776)); +#296758 = ORIENTED_EDGE('',*,*,#296737,.T.); +#296759 = ORIENTED_EDGE('',*,*,#296760,.T.); +#296760 = EDGE_CURVE('',#296730,#296761,#296763,.T.); +#296761 = VERTEX_POINT('',#296762); +#296762 = CARTESIAN_POINT('',(136.401921,-73.789509,1.545)); +#296763 = CIRCLE('',#296764,0.100000456609); +#296764 = AXIS2_PLACEMENT_3D('',#296765,#296766,#296767); +#296765 = CARTESIAN_POINT('',(136.5,-73.77,1.545)); +#296766 = DIRECTION('',(-0.,0.,-1.)); +#296767 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296768 = ORIENTED_EDGE('',*,*,#296769,.F.); +#296769 = EDGE_CURVE('',#296770,#296761,#296772,.T.); +#296770 = VERTEX_POINT('',#296771); +#296771 = CARTESIAN_POINT('',(136.401921,-73.789509,1.51)); +#296772 = LINE('',#296773,#296774); +#296773 = CARTESIAN_POINT('',(136.401921,-73.789509,1.51)); +#296774 = VECTOR('',#296775,1.); +#296775 = DIRECTION('',(0.,0.,1.)); +#296776 = ORIENTED_EDGE('',*,*,#296777,.F.); +#296777 = EDGE_CURVE('',#296738,#296770,#296778,.T.); +#296778 = CIRCLE('',#296779,0.100000456609); +#296779 = AXIS2_PLACEMENT_3D('',#296780,#296781,#296782); +#296780 = CARTESIAN_POINT('',(136.5,-73.77,1.51)); +#296781 = DIRECTION('',(-0.,0.,-1.)); +#296782 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296783 = CYLINDRICAL_SURFACE('',#296784,0.100000456609); +#296784 = AXIS2_PLACEMENT_3D('',#296785,#296786,#296787); +#296785 = CARTESIAN_POINT('',(136.5,-73.77,1.51)); +#296786 = DIRECTION('',(-0.,0.,-1.)); +#296787 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296788 = ADVANCED_FACE('',(#296789),#296814,.T.); +#296789 = FACE_BOUND('',#296790,.T.); +#296790 = EDGE_LOOP('',(#296791,#296792,#296800,#296808)); +#296791 = ORIENTED_EDGE('',*,*,#296769,.T.); +#296792 = ORIENTED_EDGE('',*,*,#296793,.T.); +#296793 = EDGE_CURVE('',#296761,#296794,#296796,.T.); +#296794 = VERTEX_POINT('',#296795); +#296795 = CARTESIAN_POINT('',(136.4,-71.07,1.545)); +#296796 = LINE('',#296797,#296798); +#296797 = CARTESIAN_POINT('',(136.401921,-73.789509,1.545)); +#296798 = VECTOR('',#296799,1.); +#296799 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296800 = ORIENTED_EDGE('',*,*,#296801,.F.); +#296801 = EDGE_CURVE('',#296802,#296794,#296804,.T.); +#296802 = VERTEX_POINT('',#296803); +#296803 = CARTESIAN_POINT('',(136.4,-71.07,1.51)); +#296804 = LINE('',#296805,#296806); +#296805 = CARTESIAN_POINT('',(136.4,-71.07,1.51)); +#296806 = VECTOR('',#296807,1.); +#296807 = DIRECTION('',(0.,0.,1.)); +#296808 = ORIENTED_EDGE('',*,*,#296809,.F.); +#296809 = EDGE_CURVE('',#296770,#296802,#296810,.T.); +#296810 = LINE('',#296811,#296812); +#296811 = CARTESIAN_POINT('',(136.401921,-73.789509,1.51)); +#296812 = VECTOR('',#296813,1.); +#296813 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296814 = PLANE('',#296815); +#296815 = AXIS2_PLACEMENT_3D('',#296816,#296817,#296818); +#296816 = CARTESIAN_POINT('',(136.401921,-73.789509,1.51)); +#296817 = DIRECTION('',(-0.999999750515,-7.063773352917E-04,0.)); +#296818 = DIRECTION('',(-7.063773352917E-04,0.999999750515,0.)); +#296819 = ADVANCED_FACE('',(#296820),#296845,.T.); +#296820 = FACE_BOUND('',#296821,.T.); +#296821 = EDGE_LOOP('',(#296822,#296823,#296831,#296839)); +#296822 = ORIENTED_EDGE('',*,*,#296801,.T.); +#296823 = ORIENTED_EDGE('',*,*,#296824,.T.); +#296824 = EDGE_CURVE('',#296794,#296825,#296827,.T.); +#296825 = VERTEX_POINT('',#296826); +#296826 = CARTESIAN_POINT('',(135.2,-71.07,1.545)); +#296827 = LINE('',#296828,#296829); +#296828 = CARTESIAN_POINT('',(136.4,-71.07,1.545)); +#296829 = VECTOR('',#296830,1.); +#296830 = DIRECTION('',(-1.,0.,0.)); +#296831 = ORIENTED_EDGE('',*,*,#296832,.F.); +#296832 = EDGE_CURVE('',#296833,#296825,#296835,.T.); +#296833 = VERTEX_POINT('',#296834); +#296834 = CARTESIAN_POINT('',(135.2,-71.07,1.51)); +#296835 = LINE('',#296836,#296837); +#296836 = CARTESIAN_POINT('',(135.2,-71.07,1.51)); +#296837 = VECTOR('',#296838,1.); +#296838 = DIRECTION('',(0.,0.,1.)); +#296839 = ORIENTED_EDGE('',*,*,#296840,.F.); +#296840 = EDGE_CURVE('',#296802,#296833,#296841,.T.); +#296841 = LINE('',#296842,#296843); +#296842 = CARTESIAN_POINT('',(136.4,-71.07,1.51)); +#296843 = VECTOR('',#296844,1.); +#296844 = DIRECTION('',(-1.,0.,0.)); +#296845 = PLANE('',#296846); +#296846 = AXIS2_PLACEMENT_3D('',#296847,#296848,#296849); +#296847 = CARTESIAN_POINT('',(136.4,-71.07,1.51)); +#296848 = DIRECTION('',(0.,-1.,0.)); +#296849 = DIRECTION('',(-1.,0.,0.)); +#296850 = ADVANCED_FACE('',(#296851),#296876,.T.); +#296851 = FACE_BOUND('',#296852,.T.); +#296852 = EDGE_LOOP('',(#296853,#296854,#296862,#296870)); +#296853 = ORIENTED_EDGE('',*,*,#296832,.T.); +#296854 = ORIENTED_EDGE('',*,*,#296855,.T.); +#296855 = EDGE_CURVE('',#296825,#296856,#296858,.T.); +#296856 = VERTEX_POINT('',#296857); +#296857 = CARTESIAN_POINT('',(135.198079,-73.789509,1.545)); +#296858 = LINE('',#296859,#296860); +#296859 = CARTESIAN_POINT('',(135.2,-71.07,1.545)); +#296860 = VECTOR('',#296861,1.); +#296861 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296862 = ORIENTED_EDGE('',*,*,#296863,.F.); +#296863 = EDGE_CURVE('',#296864,#296856,#296866,.T.); +#296864 = VERTEX_POINT('',#296865); +#296865 = CARTESIAN_POINT('',(135.198079,-73.789509,1.51)); +#296866 = LINE('',#296867,#296868); +#296867 = CARTESIAN_POINT('',(135.198079,-73.789509,1.51)); +#296868 = VECTOR('',#296869,1.); +#296869 = DIRECTION('',(0.,0.,1.)); +#296870 = ORIENTED_EDGE('',*,*,#296871,.F.); +#296871 = EDGE_CURVE('',#296833,#296864,#296872,.T.); +#296872 = LINE('',#296873,#296874); +#296873 = CARTESIAN_POINT('',(135.2,-71.07,1.51)); +#296874 = VECTOR('',#296875,1.); +#296875 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296876 = PLANE('',#296877); +#296877 = AXIS2_PLACEMENT_3D('',#296878,#296879,#296880); +#296878 = CARTESIAN_POINT('',(135.2,-71.07,1.51)); +#296879 = DIRECTION('',(0.999999750515,-7.063773352917E-04,0.)); +#296880 = DIRECTION('',(-7.063773352917E-04,-0.999999750515,0.)); +#296881 = ADVANCED_FACE('',(#296882),#296909,.T.); +#296882 = FACE_BOUND('',#296883,.T.); +#296883 = EDGE_LOOP('',(#296884,#296885,#296894,#296902)); +#296884 = ORIENTED_EDGE('',*,*,#296863,.T.); +#296885 = ORIENTED_EDGE('',*,*,#296886,.T.); +#296886 = EDGE_CURVE('',#296856,#296887,#296889,.T.); +#296887 = VERTEX_POINT('',#296888); +#296888 = CARTESIAN_POINT('',(135.001921,-73.789509,1.545)); +#296889 = CIRCLE('',#296890,0.100000456609); +#296890 = AXIS2_PLACEMENT_3D('',#296891,#296892,#296893); +#296891 = CARTESIAN_POINT('',(135.1,-73.77,1.545)); +#296892 = DIRECTION('',(-0.,0.,-1.)); +#296893 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296894 = ORIENTED_EDGE('',*,*,#296895,.F.); +#296895 = EDGE_CURVE('',#296896,#296887,#296898,.T.); +#296896 = VERTEX_POINT('',#296897); +#296897 = CARTESIAN_POINT('',(135.001921,-73.789509,1.51)); +#296898 = LINE('',#296899,#296900); +#296899 = CARTESIAN_POINT('',(135.001921,-73.789509,1.51)); +#296900 = VECTOR('',#296901,1.); +#296901 = DIRECTION('',(0.,0.,1.)); +#296902 = ORIENTED_EDGE('',*,*,#296903,.F.); +#296903 = EDGE_CURVE('',#296864,#296896,#296904,.T.); +#296904 = CIRCLE('',#296905,0.100000456609); +#296905 = AXIS2_PLACEMENT_3D('',#296906,#296907,#296908); +#296906 = CARTESIAN_POINT('',(135.1,-73.77,1.51)); +#296907 = DIRECTION('',(-0.,0.,-1.)); +#296908 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296909 = CYLINDRICAL_SURFACE('',#296910,0.100000456609); +#296910 = AXIS2_PLACEMENT_3D('',#296911,#296912,#296913); +#296911 = CARTESIAN_POINT('',(135.1,-73.77,1.51)); +#296912 = DIRECTION('',(-0.,0.,-1.)); +#296913 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#296914 = ADVANCED_FACE('',(#296915),#296931,.T.); +#296915 = FACE_BOUND('',#296916,.T.); +#296916 = EDGE_LOOP('',(#296917,#296918,#296924,#296925)); +#296917 = ORIENTED_EDGE('',*,*,#296895,.T.); +#296918 = ORIENTED_EDGE('',*,*,#296919,.T.); +#296919 = EDGE_CURVE('',#296887,#296187,#296920,.T.); +#296920 = LINE('',#296921,#296922); +#296921 = CARTESIAN_POINT('',(135.001921,-73.789509,1.545)); +#296922 = VECTOR('',#296923,1.); +#296923 = DIRECTION('',(0.,1.,0.)); +#296924 = ORIENTED_EDGE('',*,*,#296184,.F.); +#296925 = ORIENTED_EDGE('',*,*,#296926,.F.); +#296926 = EDGE_CURVE('',#296896,#296185,#296927,.T.); +#296927 = LINE('',#296928,#296929); +#296928 = CARTESIAN_POINT('',(135.001921,-73.789509,1.51)); +#296929 = VECTOR('',#296930,1.); +#296930 = DIRECTION('',(0.,1.,0.)); +#296931 = PLANE('',#296932); +#296932 = AXIS2_PLACEMENT_3D('',#296933,#296934,#296935); +#296933 = CARTESIAN_POINT('',(135.001921,-73.789509,1.51)); +#296934 = DIRECTION('',(-1.,0.,0.)); +#296935 = DIRECTION('',(0.,1.,0.)); +#296936 = ADVANCED_FACE('',(#296937),#296964,.F.); +#296937 = FACE_BOUND('',#296938,.T.); +#296938 = EDGE_LOOP('',(#296939,#296949,#296956,#296957)); +#296939 = ORIENTED_EDGE('',*,*,#296940,.T.); +#296940 = EDGE_CURVE('',#296941,#296943,#296945,.T.); +#296941 = VERTEX_POINT('',#296942); +#296942 = CARTESIAN_POINT('',(140.837255,-71.8,1.51)); +#296943 = VERTEX_POINT('',#296944); +#296944 = CARTESIAN_POINT('',(140.837255,-71.8,1.545)); +#296945 = LINE('',#296946,#296947); +#296946 = CARTESIAN_POINT('',(140.837255,-71.8,1.51)); +#296947 = VECTOR('',#296948,1.); +#296948 = DIRECTION('',(0.,0.,1.)); +#296949 = ORIENTED_EDGE('',*,*,#296950,.T.); +#296950 = EDGE_CURVE('',#296943,#296943,#296951,.T.); +#296951 = CIRCLE('',#296952,0.137255); +#296952 = AXIS2_PLACEMENT_3D('',#296953,#296954,#296955); +#296953 = CARTESIAN_POINT('',(140.7,-71.8,1.545)); +#296954 = DIRECTION('',(0.,0.,1.)); +#296955 = DIRECTION('',(1.,0.,-0.)); +#296956 = ORIENTED_EDGE('',*,*,#296940,.F.); +#296957 = ORIENTED_EDGE('',*,*,#296958,.F.); +#296958 = EDGE_CURVE('',#296941,#296941,#296959,.T.); +#296959 = CIRCLE('',#296960,0.137255); +#296960 = AXIS2_PLACEMENT_3D('',#296961,#296962,#296963); +#296961 = CARTESIAN_POINT('',(140.7,-71.8,1.51)); +#296962 = DIRECTION('',(0.,0.,1.)); +#296963 = DIRECTION('',(1.,0.,-0.)); +#296964 = CYLINDRICAL_SURFACE('',#296965,0.137255); +#296965 = AXIS2_PLACEMENT_3D('',#296966,#296967,#296968); +#296966 = CARTESIAN_POINT('',(140.7,-71.8,1.51)); +#296967 = DIRECTION('',(-0.,-0.,-1.)); +#296968 = DIRECTION('',(1.,0.,-0.)); +#296969 = ADVANCED_FACE('',(#296970,#296996),#296999,.F.); +#296970 = FACE_BOUND('',#296971,.T.); +#296971 = EDGE_LOOP('',(#296972,#296973,#296974,#296975,#296976,#296977, + #296978,#296979,#296980,#296981,#296982,#296983,#296984,#296985, + #296986,#296987,#296988,#296989,#296990,#296991,#296992,#296993, + #296994,#296995)); +#296972 = ORIENTED_EDGE('',*,*,#296211,.T.); +#296973 = ORIENTED_EDGE('',*,*,#296243,.T.); +#296974 = ORIENTED_EDGE('',*,*,#296274,.T.); +#296975 = ORIENTED_EDGE('',*,*,#296306,.T.); +#296976 = ORIENTED_EDGE('',*,*,#296338,.T.); +#296977 = ORIENTED_EDGE('',*,*,#296369,.T.); +#296978 = ORIENTED_EDGE('',*,*,#296400,.T.); +#296979 = ORIENTED_EDGE('',*,*,#296431,.T.); +#296980 = ORIENTED_EDGE('',*,*,#296463,.T.); +#296981 = ORIENTED_EDGE('',*,*,#296495,.T.); +#296982 = ORIENTED_EDGE('',*,*,#296526,.T.); +#296983 = ORIENTED_EDGE('',*,*,#296557,.T.); +#296984 = ORIENTED_EDGE('',*,*,#296588,.T.); +#296985 = ORIENTED_EDGE('',*,*,#296619,.T.); +#296986 = ORIENTED_EDGE('',*,*,#296651,.T.); +#296987 = ORIENTED_EDGE('',*,*,#296683,.T.); +#296988 = ORIENTED_EDGE('',*,*,#296714,.T.); +#296989 = ORIENTED_EDGE('',*,*,#296745,.T.); +#296990 = ORIENTED_EDGE('',*,*,#296777,.T.); +#296991 = ORIENTED_EDGE('',*,*,#296809,.T.); +#296992 = ORIENTED_EDGE('',*,*,#296840,.T.); +#296993 = ORIENTED_EDGE('',*,*,#296871,.T.); +#296994 = ORIENTED_EDGE('',*,*,#296903,.T.); +#296995 = ORIENTED_EDGE('',*,*,#296926,.T.); +#296996 = FACE_BOUND('',#296997,.T.); +#296997 = EDGE_LOOP('',(#296998)); +#296998 = ORIENTED_EDGE('',*,*,#296958,.T.); +#296999 = PLANE('',#297000); +#297000 = AXIS2_PLACEMENT_3D('',#297001,#297002,#297003); +#297001 = CARTESIAN_POINT('',(0.,0.,1.51)); +#297002 = DIRECTION('',(0.,0.,1.)); +#297003 = DIRECTION('',(1.,0.,-0.)); +#297004 = ADVANCED_FACE('',(#297005,#297031),#297034,.T.); +#297005 = FACE_BOUND('',#297006,.F.); +#297006 = EDGE_LOOP('',(#297007,#297008,#297009,#297010,#297011,#297012, + #297013,#297014,#297015,#297016,#297017,#297018,#297019,#297020, + #297021,#297022,#297023,#297024,#297025,#297026,#297027,#297028, + #297029,#297030)); +#297007 = ORIENTED_EDGE('',*,*,#296194,.T.); +#297008 = ORIENTED_EDGE('',*,*,#296227,.T.); +#297009 = ORIENTED_EDGE('',*,*,#296258,.T.); +#297010 = ORIENTED_EDGE('',*,*,#296289,.T.); +#297011 = ORIENTED_EDGE('',*,*,#296322,.T.); +#297012 = ORIENTED_EDGE('',*,*,#296353,.T.); +#297013 = ORIENTED_EDGE('',*,*,#296384,.T.); +#297014 = ORIENTED_EDGE('',*,*,#296415,.T.); +#297015 = ORIENTED_EDGE('',*,*,#296446,.T.); +#297016 = ORIENTED_EDGE('',*,*,#296479,.T.); +#297017 = ORIENTED_EDGE('',*,*,#296510,.T.); +#297018 = ORIENTED_EDGE('',*,*,#296541,.T.); +#297019 = ORIENTED_EDGE('',*,*,#296572,.T.); +#297020 = ORIENTED_EDGE('',*,*,#296603,.T.); +#297021 = ORIENTED_EDGE('',*,*,#296634,.T.); +#297022 = ORIENTED_EDGE('',*,*,#296667,.T.); +#297023 = ORIENTED_EDGE('',*,*,#296698,.T.); +#297024 = ORIENTED_EDGE('',*,*,#296729,.T.); +#297025 = ORIENTED_EDGE('',*,*,#296760,.T.); +#297026 = ORIENTED_EDGE('',*,*,#296793,.T.); +#297027 = ORIENTED_EDGE('',*,*,#296824,.T.); +#297028 = ORIENTED_EDGE('',*,*,#296855,.T.); +#297029 = ORIENTED_EDGE('',*,*,#296886,.T.); +#297030 = ORIENTED_EDGE('',*,*,#296919,.T.); +#297031 = FACE_BOUND('',#297032,.F.); +#297032 = EDGE_LOOP('',(#297033)); +#297033 = ORIENTED_EDGE('',*,*,#296950,.T.); +#297034 = PLANE('',#297035); +#297035 = AXIS2_PLACEMENT_3D('',#297036,#297037,#297038); +#297036 = CARTESIAN_POINT('',(0.,0.,1.545)); +#297037 = DIRECTION('',(0.,0.,1.)); +#297038 = DIRECTION('',(1.,0.,-0.)); +#297039 = MANIFOLD_SOLID_BREP('',#297040); +#297040 = CLOSED_SHELL('',(#297041,#297083,#297114,#297145,#297176, + #297209,#297240,#297271,#297302,#297335,#297366,#297397,#297428, + #297459,#297490,#297521,#297552,#297585,#297616,#297647,#297678, + #297709,#297740,#297771,#297802,#297835,#297866,#297897,#297928, + #297959,#297981,#298014,#298055)); +#297041 = ADVANCED_FACE('',(#297042),#297078,.T.); +#297042 = FACE_BOUND('',#297043,.T.); +#297043 = EDGE_LOOP('',(#297044,#297054,#297063,#297071)); +#297044 = ORIENTED_EDGE('',*,*,#297045,.T.); +#297045 = EDGE_CURVE('',#297046,#297048,#297050,.T.); +#297046 = VERTEX_POINT('',#297047); +#297047 = CARTESIAN_POINT('',(123.551921,-62.630491,1.51)); +#297048 = VERTEX_POINT('',#297049); +#297049 = CARTESIAN_POINT('',(123.551921,-62.630491,1.545)); +#297050 = LINE('',#297051,#297052); +#297051 = CARTESIAN_POINT('',(123.551921,-62.630491,1.51)); +#297052 = VECTOR('',#297053,1.); +#297053 = DIRECTION('',(0.,0.,1.)); +#297054 = ORIENTED_EDGE('',*,*,#297055,.T.); +#297055 = EDGE_CURVE('',#297048,#297056,#297058,.T.); +#297056 = VERTEX_POINT('',#297057); +#297057 = CARTESIAN_POINT('',(123.669509,-62.551921,1.545)); +#297058 = CIRCLE('',#297059,9.999950505629E-02); +#297059 = AXIS2_PLACEMENT_3D('',#297060,#297061,#297062); +#297060 = CARTESIAN_POINT('',(123.64999925236,-62.64999888108,1.545)); +#297061 = DIRECTION('',(0.,0.,-1.)); +#297062 = DIRECTION('',(-0.980787377995,0.195079776415,0.)); +#297063 = ORIENTED_EDGE('',*,*,#297064,.F.); +#297064 = EDGE_CURVE('',#297065,#297056,#297067,.T.); +#297065 = VERTEX_POINT('',#297066); +#297066 = CARTESIAN_POINT('',(123.669509,-62.551921,1.51)); +#297067 = LINE('',#297068,#297069); +#297068 = CARTESIAN_POINT('',(123.669509,-62.551921,1.51)); +#297069 = VECTOR('',#297070,1.); +#297070 = DIRECTION('',(0.,0.,1.)); +#297071 = ORIENTED_EDGE('',*,*,#297072,.F.); +#297072 = EDGE_CURVE('',#297046,#297065,#297073,.T.); +#297073 = CIRCLE('',#297074,9.999950505629E-02); +#297074 = AXIS2_PLACEMENT_3D('',#297075,#297076,#297077); +#297075 = CARTESIAN_POINT('',(123.64999925236,-62.64999888108,1.51)); +#297076 = DIRECTION('',(0.,0.,-1.)); +#297077 = DIRECTION('',(-0.980787377995,0.195079776415,0.)); +#297078 = CYLINDRICAL_SURFACE('',#297079,9.999950505629E-02); +#297079 = AXIS2_PLACEMENT_3D('',#297080,#297081,#297082); +#297080 = CARTESIAN_POINT('',(123.64999925236,-62.64999888108,1.51)); +#297081 = DIRECTION('',(0.,0.,-1.)); +#297082 = DIRECTION('',(-0.980787377995,0.195079776415,0.)); +#297083 = ADVANCED_FACE('',(#297084),#297109,.T.); +#297084 = FACE_BOUND('',#297085,.T.); +#297085 = EDGE_LOOP('',(#297086,#297087,#297095,#297103)); +#297086 = ORIENTED_EDGE('',*,*,#297064,.T.); +#297087 = ORIENTED_EDGE('',*,*,#297088,.T.); +#297088 = EDGE_CURVE('',#297056,#297089,#297091,.T.); +#297089 = VERTEX_POINT('',#297090); +#297090 = CARTESIAN_POINT('',(123.690626,-62.560668,1.545)); +#297091 = LINE('',#297092,#297093); +#297092 = CARTESIAN_POINT('',(123.669509,-62.551921,1.545)); +#297093 = VECTOR('',#297094,1.); +#297094 = DIRECTION('',(0.923878725021,-0.382685381814,0.)); +#297095 = ORIENTED_EDGE('',*,*,#297096,.F.); +#297096 = EDGE_CURVE('',#297097,#297089,#297099,.T.); +#297097 = VERTEX_POINT('',#297098); +#297098 = CARTESIAN_POINT('',(123.690626,-62.560668,1.51)); +#297099 = LINE('',#297100,#297101); +#297100 = CARTESIAN_POINT('',(123.690626,-62.560668,1.51)); +#297101 = VECTOR('',#297102,1.); +#297102 = DIRECTION('',(0.,0.,1.)); +#297103 = ORIENTED_EDGE('',*,*,#297104,.F.); +#297104 = EDGE_CURVE('',#297065,#297097,#297105,.T.); +#297105 = LINE('',#297106,#297107); +#297106 = CARTESIAN_POINT('',(123.669509,-62.551921,1.51)); +#297107 = VECTOR('',#297108,1.); +#297108 = DIRECTION('',(0.923878725021,-0.382685381814,0.)); +#297109 = PLANE('',#297110); +#297110 = AXIS2_PLACEMENT_3D('',#297111,#297112,#297113); +#297111 = CARTESIAN_POINT('',(123.669509,-62.551921,1.51)); +#297112 = DIRECTION('',(0.382685381814,0.923878725021,-0.)); +#297113 = DIRECTION('',(0.923878725021,-0.382685381814,0.)); +#297114 = ADVANCED_FACE('',(#297115),#297140,.T.); +#297115 = FACE_BOUND('',#297116,.T.); +#297116 = EDGE_LOOP('',(#297117,#297118,#297126,#297134)); +#297117 = ORIENTED_EDGE('',*,*,#297096,.T.); +#297118 = ORIENTED_EDGE('',*,*,#297119,.T.); +#297119 = EDGE_CURVE('',#297089,#297120,#297122,.T.); +#297120 = VERTEX_POINT('',#297121); +#297121 = CARTESIAN_POINT('',(123.720711,-62.57929,1.545)); +#297122 = LINE('',#297123,#297124); +#297123 = CARTESIAN_POINT('',(123.690626,-62.560668,1.545)); +#297124 = VECTOR('',#297125,1.); +#297125 = DIRECTION('',(0.850291045646,-0.526312775537,0.)); +#297126 = ORIENTED_EDGE('',*,*,#297127,.F.); +#297127 = EDGE_CURVE('',#297128,#297120,#297130,.T.); +#297128 = VERTEX_POINT('',#297129); +#297129 = CARTESIAN_POINT('',(123.720711,-62.57929,1.51)); +#297130 = LINE('',#297131,#297132); +#297131 = CARTESIAN_POINT('',(123.720711,-62.57929,1.51)); +#297132 = VECTOR('',#297133,1.); +#297133 = DIRECTION('',(0.,0.,1.)); +#297134 = ORIENTED_EDGE('',*,*,#297135,.F.); +#297135 = EDGE_CURVE('',#297097,#297128,#297136,.T.); +#297136 = LINE('',#297137,#297138); +#297137 = CARTESIAN_POINT('',(123.690626,-62.560668,1.51)); +#297138 = VECTOR('',#297139,1.); +#297139 = DIRECTION('',(0.850291045646,-0.526312775537,0.)); +#297140 = PLANE('',#297141); +#297141 = AXIS2_PLACEMENT_3D('',#297142,#297143,#297144); +#297142 = CARTESIAN_POINT('',(123.690626,-62.560668,1.51)); +#297143 = DIRECTION('',(0.526312775537,0.850291045646,-0.)); +#297144 = DIRECTION('',(0.850291045646,-0.526312775537,0.)); +#297145 = ADVANCED_FACE('',(#297146),#297171,.T.); +#297146 = FACE_BOUND('',#297147,.T.); +#297147 = EDGE_LOOP('',(#297148,#297149,#297157,#297165)); +#297148 = ORIENTED_EDGE('',*,*,#297127,.T.); +#297149 = ORIENTED_EDGE('',*,*,#297150,.T.); +#297150 = EDGE_CURVE('',#297120,#297151,#297153,.T.); +#297151 = VERTEX_POINT('',#297152); +#297152 = CARTESIAN_POINT('',(123.883147,-62.744444,1.545)); +#297153 = LINE('',#297154,#297155); +#297154 = CARTESIAN_POINT('',(123.720711,-62.57929,1.545)); +#297155 = VECTOR('',#297156,1.); +#297156 = DIRECTION('',(0.701215811685,-0.712949076332,0.)); +#297157 = ORIENTED_EDGE('',*,*,#297158,.F.); +#297158 = EDGE_CURVE('',#297159,#297151,#297161,.T.); +#297159 = VERTEX_POINT('',#297160); +#297160 = CARTESIAN_POINT('',(123.883147,-62.744444,1.51)); +#297161 = LINE('',#297162,#297163); +#297162 = CARTESIAN_POINT('',(123.883147,-62.744444,1.51)); +#297163 = VECTOR('',#297164,1.); +#297164 = DIRECTION('',(0.,0.,1.)); +#297165 = ORIENTED_EDGE('',*,*,#297166,.F.); +#297166 = EDGE_CURVE('',#297128,#297159,#297167,.T.); +#297167 = LINE('',#297168,#297169); +#297168 = CARTESIAN_POINT('',(123.720711,-62.57929,1.51)); +#297169 = VECTOR('',#297170,1.); +#297170 = DIRECTION('',(0.701215811685,-0.712949076332,0.)); +#297171 = PLANE('',#297172); +#297172 = AXIS2_PLACEMENT_3D('',#297173,#297174,#297175); +#297173 = CARTESIAN_POINT('',(123.720711,-62.57929,1.51)); +#297174 = DIRECTION('',(0.712949076332,0.701215811685,-0.)); +#297175 = DIRECTION('',(0.701215811685,-0.712949076332,0.)); +#297176 = ADVANCED_FACE('',(#297177),#297204,.T.); +#297177 = FACE_BOUND('',#297178,.T.); +#297178 = EDGE_LOOP('',(#297179,#297180,#297189,#297197)); +#297179 = ORIENTED_EDGE('',*,*,#297158,.T.); +#297180 = ORIENTED_EDGE('',*,*,#297181,.T.); +#297181 = EDGE_CURVE('',#297151,#297182,#297184,.T.); +#297182 = VERTEX_POINT('',#297183); +#297183 = CARTESIAN_POINT('',(123.75,-62.88545,1.545)); +#297184 = CIRCLE('',#297185,9.938125409957E-02); +#297185 = AXIS2_PLACEMENT_3D('',#297186,#297187,#297188); +#297186 = CARTESIAN_POINT('',(123.80074505669,-62.80000075841,1.545)); +#297187 = DIRECTION('',(0.,0.,-1.)); +#297188 = DIRECTION('',(0.829149763255,0.559026537915,0.)); +#297189 = ORIENTED_EDGE('',*,*,#297190,.F.); +#297190 = EDGE_CURVE('',#297191,#297182,#297193,.T.); +#297191 = VERTEX_POINT('',#297192); +#297192 = CARTESIAN_POINT('',(123.75,-62.88545,1.51)); +#297193 = LINE('',#297194,#297195); +#297194 = CARTESIAN_POINT('',(123.75,-62.88545,1.51)); +#297195 = VECTOR('',#297196,1.); +#297196 = DIRECTION('',(0.,0.,1.)); +#297197 = ORIENTED_EDGE('',*,*,#297198,.F.); +#297198 = EDGE_CURVE('',#297159,#297191,#297199,.T.); +#297199 = CIRCLE('',#297200,9.938125409957E-02); +#297200 = AXIS2_PLACEMENT_3D('',#297201,#297202,#297203); +#297201 = CARTESIAN_POINT('',(123.80074505669,-62.80000075841,1.51)); +#297202 = DIRECTION('',(0.,0.,-1.)); +#297203 = DIRECTION('',(0.829149763255,0.559026537915,0.)); +#297204 = CYLINDRICAL_SURFACE('',#297205,9.938125409957E-02); +#297205 = AXIS2_PLACEMENT_3D('',#297206,#297207,#297208); +#297206 = CARTESIAN_POINT('',(123.80074505669,-62.80000075841,1.51)); +#297207 = DIRECTION('',(0.,0.,-1.)); +#297208 = DIRECTION('',(0.829149763255,0.559026537915,0.)); +#297209 = ADVANCED_FACE('',(#297210),#297235,.T.); +#297210 = FACE_BOUND('',#297211,.T.); +#297211 = EDGE_LOOP('',(#297212,#297213,#297221,#297229)); +#297212 = ORIENTED_EDGE('',*,*,#297190,.T.); +#297213 = ORIENTED_EDGE('',*,*,#297214,.T.); +#297214 = EDGE_CURVE('',#297182,#297215,#297217,.T.); +#297215 = VERTEX_POINT('',#297216); +#297216 = CARTESIAN_POINT('',(123.748079,-63.769509,1.545)); +#297217 = LINE('',#297218,#297219); +#297218 = CARTESIAN_POINT('',(123.75,-62.88545,1.545)); +#297219 = VECTOR('',#297220,1.); +#297220 = DIRECTION('',(-2.172926767199E-03,-0.999997639192,0.)); +#297221 = ORIENTED_EDGE('',*,*,#297222,.F.); +#297222 = EDGE_CURVE('',#297223,#297215,#297225,.T.); +#297223 = VERTEX_POINT('',#297224); +#297224 = CARTESIAN_POINT('',(123.748079,-63.769509,1.51)); +#297225 = LINE('',#297226,#297227); +#297226 = CARTESIAN_POINT('',(123.748079,-63.769509,1.51)); +#297227 = VECTOR('',#297228,1.); +#297228 = DIRECTION('',(0.,0.,1.)); +#297229 = ORIENTED_EDGE('',*,*,#297230,.F.); +#297230 = EDGE_CURVE('',#297191,#297223,#297231,.T.); +#297231 = LINE('',#297232,#297233); +#297232 = CARTESIAN_POINT('',(123.75,-62.88545,1.51)); +#297233 = VECTOR('',#297234,1.); +#297234 = DIRECTION('',(-2.172926767199E-03,-0.999997639192,0.)); +#297235 = PLANE('',#297236); +#297236 = AXIS2_PLACEMENT_3D('',#297237,#297238,#297239); +#297237 = CARTESIAN_POINT('',(123.75,-62.88545,1.51)); +#297238 = DIRECTION('',(0.999997639192,-2.172926767199E-03,0.)); +#297239 = DIRECTION('',(-2.172926767199E-03,-0.999997639192,0.)); +#297240 = ADVANCED_FACE('',(#297241),#297266,.T.); +#297241 = FACE_BOUND('',#297242,.T.); +#297242 = EDGE_LOOP('',(#297243,#297244,#297252,#297260)); +#297243 = ORIENTED_EDGE('',*,*,#297222,.T.); +#297244 = ORIENTED_EDGE('',*,*,#297245,.T.); +#297245 = EDGE_CURVE('',#297215,#297246,#297248,.T.); +#297246 = VERTEX_POINT('',#297247); +#297247 = CARTESIAN_POINT('',(123.733147,-63.805557,1.545)); +#297248 = LINE('',#297249,#297250); +#297249 = CARTESIAN_POINT('',(123.748079,-63.769509,1.545)); +#297250 = VECTOR('',#297251,1.); +#297251 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#297252 = ORIENTED_EDGE('',*,*,#297253,.F.); +#297253 = EDGE_CURVE('',#297254,#297246,#297256,.T.); +#297254 = VERTEX_POINT('',#297255); +#297255 = CARTESIAN_POINT('',(123.733147,-63.805557,1.51)); +#297256 = LINE('',#297257,#297258); +#297257 = CARTESIAN_POINT('',(123.733147,-63.805557,1.51)); +#297258 = VECTOR('',#297259,1.); +#297259 = DIRECTION('',(0.,0.,1.)); +#297260 = ORIENTED_EDGE('',*,*,#297261,.F.); +#297261 = EDGE_CURVE('',#297223,#297254,#297262,.T.); +#297262 = LINE('',#297263,#297264); +#297263 = CARTESIAN_POINT('',(123.748079,-63.769509,1.51)); +#297264 = VECTOR('',#297265,1.); +#297265 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#297266 = PLANE('',#297267); +#297267 = AXIS2_PLACEMENT_3D('',#297268,#297269,#297270); +#297268 = CARTESIAN_POINT('',(123.748079,-63.769509,1.51)); +#297269 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#297270 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#297271 = ADVANCED_FACE('',(#297272),#297297,.T.); +#297272 = FACE_BOUND('',#297273,.T.); +#297273 = EDGE_LOOP('',(#297274,#297275,#297283,#297291)); +#297274 = ORIENTED_EDGE('',*,*,#297253,.T.); +#297275 = ORIENTED_EDGE('',*,*,#297276,.T.); +#297276 = EDGE_CURVE('',#297246,#297277,#297279,.T.); +#297277 = VERTEX_POINT('',#297278); +#297278 = CARTESIAN_POINT('',(123.317202,-64.224219,1.545)); +#297279 = LINE('',#297280,#297281); +#297280 = CARTESIAN_POINT('',(123.733147,-63.805557,1.545)); +#297281 = VECTOR('',#297282,1.); +#297282 = DIRECTION('',(-0.704801113855,-0.70940495481,0.)); +#297283 = ORIENTED_EDGE('',*,*,#297284,.F.); +#297284 = EDGE_CURVE('',#297285,#297277,#297287,.T.); +#297285 = VERTEX_POINT('',#297286); +#297286 = CARTESIAN_POINT('',(123.317202,-64.224219,1.51)); +#297287 = LINE('',#297288,#297289); +#297288 = CARTESIAN_POINT('',(123.317202,-64.224219,1.51)); +#297289 = VECTOR('',#297290,1.); +#297290 = DIRECTION('',(0.,0.,1.)); +#297291 = ORIENTED_EDGE('',*,*,#297292,.F.); +#297292 = EDGE_CURVE('',#297254,#297285,#297293,.T.); +#297293 = LINE('',#297294,#297295); +#297294 = CARTESIAN_POINT('',(123.733147,-63.805557,1.51)); +#297295 = VECTOR('',#297296,1.); +#297296 = DIRECTION('',(-0.704801113855,-0.70940495481,0.)); +#297297 = PLANE('',#297298); +#297298 = AXIS2_PLACEMENT_3D('',#297299,#297300,#297301); +#297299 = CARTESIAN_POINT('',(123.733147,-63.805557,1.51)); +#297300 = DIRECTION('',(0.70940495481,-0.704801113855,0.)); +#297301 = DIRECTION('',(-0.704801113855,-0.70940495481,0.)); +#297302 = ADVANCED_FACE('',(#297303),#297330,.T.); +#297303 = FACE_BOUND('',#297304,.T.); +#297304 = EDGE_LOOP('',(#297305,#297306,#297315,#297323)); +#297305 = ORIENTED_EDGE('',*,*,#297284,.T.); +#297306 = ORIENTED_EDGE('',*,*,#297307,.T.); +#297307 = EDGE_CURVE('',#297277,#297308,#297310,.T.); +#297308 = VERTEX_POINT('',#297309); +#297309 = CARTESIAN_POINT('',(123.477164,-64.385195,1.545)); +#297310 = CIRCLE('',#297311,0.296522047081); +#297311 = AXIS2_PLACEMENT_3D('',#297312,#297313,#297314); +#297312 = CARTESIAN_POINT('',(123.20285816793,-64.49780776525,1.545)); +#297313 = DIRECTION('',(0.,0.,-1.)); +#297314 = DIRECTION('',(0.385616628492,0.922659100551,0.)); +#297315 = ORIENTED_EDGE('',*,*,#297316,.F.); +#297316 = EDGE_CURVE('',#297317,#297308,#297319,.T.); +#297317 = VERTEX_POINT('',#297318); +#297318 = CARTESIAN_POINT('',(123.477164,-64.385195,1.51)); +#297319 = LINE('',#297320,#297321); +#297320 = CARTESIAN_POINT('',(123.477164,-64.385195,1.51)); +#297321 = VECTOR('',#297322,1.); +#297322 = DIRECTION('',(0.,0.,1.)); +#297323 = ORIENTED_EDGE('',*,*,#297324,.F.); +#297324 = EDGE_CURVE('',#297285,#297317,#297325,.T.); +#297325 = CIRCLE('',#297326,0.296522047081); +#297326 = AXIS2_PLACEMENT_3D('',#297327,#297328,#297329); +#297327 = CARTESIAN_POINT('',(123.20285816793,-64.49780776525,1.51)); +#297328 = DIRECTION('',(0.,0.,-1.)); +#297329 = DIRECTION('',(0.385616628492,0.922659100551,0.)); +#297330 = CYLINDRICAL_SURFACE('',#297331,0.296522047081); +#297331 = AXIS2_PLACEMENT_3D('',#297332,#297333,#297334); +#297332 = CARTESIAN_POINT('',(123.20285816793,-64.49780776525,1.51)); +#297333 = DIRECTION('',(0.,0.,-1.)); +#297334 = DIRECTION('',(0.385616628492,0.922659100551,0.)); +#297335 = ADVANCED_FACE('',(#297336),#297361,.T.); +#297336 = FACE_BOUND('',#297337,.T.); +#297337 = EDGE_LOOP('',(#297338,#297339,#297347,#297355)); +#297338 = ORIENTED_EDGE('',*,*,#297316,.T.); +#297339 = ORIENTED_EDGE('',*,*,#297340,.T.); +#297340 = EDGE_CURVE('',#297308,#297341,#297343,.T.); +#297341 = VERTEX_POINT('',#297342); +#297342 = CARTESIAN_POINT('',(123.497433,-64.460842,1.545)); +#297343 = LINE('',#297344,#297345); +#297344 = CARTESIAN_POINT('',(123.477164,-64.385195,1.545)); +#297345 = VECTOR('',#297346,1.); +#297346 = DIRECTION('',(0.258812462159,-0.965927590159,0.)); +#297347 = ORIENTED_EDGE('',*,*,#297348,.F.); +#297348 = EDGE_CURVE('',#297349,#297341,#297351,.T.); +#297349 = VERTEX_POINT('',#297350); +#297350 = CARTESIAN_POINT('',(123.497433,-64.460842,1.51)); +#297351 = LINE('',#297352,#297353); +#297352 = CARTESIAN_POINT('',(123.497433,-64.460842,1.51)); +#297353 = VECTOR('',#297354,1.); +#297354 = DIRECTION('',(0.,0.,1.)); +#297355 = ORIENTED_EDGE('',*,*,#297356,.F.); +#297356 = EDGE_CURVE('',#297317,#297349,#297357,.T.); +#297357 = LINE('',#297358,#297359); +#297358 = CARTESIAN_POINT('',(123.477164,-64.385195,1.51)); +#297359 = VECTOR('',#297360,1.); +#297360 = DIRECTION('',(0.258812462159,-0.965927590159,0.)); +#297361 = PLANE('',#297362); +#297362 = AXIS2_PLACEMENT_3D('',#297363,#297364,#297365); +#297363 = CARTESIAN_POINT('',(123.477164,-64.385195,1.51)); +#297364 = DIRECTION('',(0.965927590159,0.258812462159,-0.)); +#297365 = DIRECTION('',(0.258812462159,-0.965927590159,0.)); +#297366 = ADVANCED_FACE('',(#297367),#297392,.T.); +#297367 = FACE_BOUND('',#297368,.T.); +#297368 = EDGE_LOOP('',(#297369,#297370,#297378,#297386)); +#297369 = ORIENTED_EDGE('',*,*,#297348,.T.); +#297370 = ORIENTED_EDGE('',*,*,#297371,.T.); +#297371 = EDGE_CURVE('',#297341,#297372,#297374,.T.); +#297372 = VERTEX_POINT('',#297373); +#297373 = CARTESIAN_POINT('',(123.497433,-64.539158,1.545)); +#297374 = LINE('',#297375,#297376); +#297375 = CARTESIAN_POINT('',(123.497433,-64.460842,1.545)); +#297376 = VECTOR('',#297377,1.); +#297377 = DIRECTION('',(0.,-1.,0.)); +#297378 = ORIENTED_EDGE('',*,*,#297379,.F.); +#297379 = EDGE_CURVE('',#297380,#297372,#297382,.T.); +#297380 = VERTEX_POINT('',#297381); +#297381 = CARTESIAN_POINT('',(123.497433,-64.539158,1.51)); +#297382 = LINE('',#297383,#297384); +#297383 = CARTESIAN_POINT('',(123.497433,-64.539158,1.51)); +#297384 = VECTOR('',#297385,1.); +#297385 = DIRECTION('',(0.,0.,1.)); +#297386 = ORIENTED_EDGE('',*,*,#297387,.F.); +#297387 = EDGE_CURVE('',#297349,#297380,#297388,.T.); +#297388 = LINE('',#297389,#297390); +#297389 = CARTESIAN_POINT('',(123.497433,-64.460842,1.51)); +#297390 = VECTOR('',#297391,1.); +#297391 = DIRECTION('',(0.,-1.,0.)); +#297392 = PLANE('',#297393); +#297393 = AXIS2_PLACEMENT_3D('',#297394,#297395,#297396); +#297394 = CARTESIAN_POINT('',(123.497433,-64.460842,1.51)); +#297395 = DIRECTION('',(1.,0.,-0.)); +#297396 = DIRECTION('',(0.,-1.,0.)); +#297397 = ADVANCED_FACE('',(#297398),#297423,.T.); +#297398 = FACE_BOUND('',#297399,.T.); +#297399 = EDGE_LOOP('',(#297400,#297401,#297409,#297417)); +#297400 = ORIENTED_EDGE('',*,*,#297379,.T.); +#297401 = ORIENTED_EDGE('',*,*,#297402,.T.); +#297402 = EDGE_CURVE('',#297372,#297403,#297405,.T.); +#297403 = VERTEX_POINT('',#297404); +#297404 = CARTESIAN_POINT('',(123.481131,-64.6,1.545)); +#297405 = LINE('',#297406,#297407); +#297406 = CARTESIAN_POINT('',(123.497433,-64.539158,1.545)); +#297407 = VECTOR('',#297408,1.); +#297408 = DIRECTION('',(-0.258810679488,-0.96592806781,0.)); +#297409 = ORIENTED_EDGE('',*,*,#297410,.F.); +#297410 = EDGE_CURVE('',#297411,#297403,#297413,.T.); +#297411 = VERTEX_POINT('',#297412); +#297412 = CARTESIAN_POINT('',(123.481131,-64.6,1.51)); +#297413 = LINE('',#297414,#297415); +#297414 = CARTESIAN_POINT('',(123.481131,-64.6,1.51)); +#297415 = VECTOR('',#297416,1.); +#297416 = DIRECTION('',(0.,0.,1.)); +#297417 = ORIENTED_EDGE('',*,*,#297418,.F.); +#297418 = EDGE_CURVE('',#297380,#297411,#297419,.T.); +#297419 = LINE('',#297420,#297421); +#297420 = CARTESIAN_POINT('',(123.497433,-64.539158,1.51)); +#297421 = VECTOR('',#297422,1.); +#297422 = DIRECTION('',(-0.258810679488,-0.96592806781,0.)); +#297423 = PLANE('',#297424); +#297424 = AXIS2_PLACEMENT_3D('',#297425,#297426,#297427); +#297425 = CARTESIAN_POINT('',(123.497433,-64.539158,1.51)); +#297426 = DIRECTION('',(0.96592806781,-0.258810679488,0.)); +#297427 = DIRECTION('',(-0.258810679488,-0.96592806781,0.)); +#297428 = ADVANCED_FACE('',(#297429),#297454,.T.); +#297429 = FACE_BOUND('',#297430,.T.); +#297430 = EDGE_LOOP('',(#297431,#297432,#297440,#297448)); +#297431 = ORIENTED_EDGE('',*,*,#297410,.T.); +#297432 = ORIENTED_EDGE('',*,*,#297433,.T.); +#297433 = EDGE_CURVE('',#297403,#297434,#297436,.T.); +#297434 = VERTEX_POINT('',#297435); +#297435 = CARTESIAN_POINT('',(124.619509,-64.601921,1.545)); +#297436 = LINE('',#297437,#297438); +#297437 = CARTESIAN_POINT('',(123.481131,-64.6,1.545)); +#297438 = VECTOR('',#297439,1.); +#297439 = DIRECTION('',(0.999998576194,-1.687486287401E-03,0.)); +#297440 = ORIENTED_EDGE('',*,*,#297441,.F.); +#297441 = EDGE_CURVE('',#297442,#297434,#297444,.T.); +#297442 = VERTEX_POINT('',#297443); +#297443 = CARTESIAN_POINT('',(124.619509,-64.601921,1.51)); +#297444 = LINE('',#297445,#297446); +#297445 = CARTESIAN_POINT('',(124.619509,-64.601921,1.51)); +#297446 = VECTOR('',#297447,1.); +#297447 = DIRECTION('',(0.,0.,1.)); +#297448 = ORIENTED_EDGE('',*,*,#297449,.F.); +#297449 = EDGE_CURVE('',#297411,#297442,#297450,.T.); +#297450 = LINE('',#297451,#297452); +#297451 = CARTESIAN_POINT('',(123.481131,-64.6,1.51)); +#297452 = VECTOR('',#297453,1.); +#297453 = DIRECTION('',(0.999998576194,-1.687486287401E-03,0.)); +#297454 = PLANE('',#297455); +#297455 = AXIS2_PLACEMENT_3D('',#297456,#297457,#297458); +#297456 = CARTESIAN_POINT('',(123.481131,-64.6,1.51)); +#297457 = DIRECTION('',(1.687486287401E-03,0.999998576194,-0.)); +#297458 = DIRECTION('',(0.999998576194,-1.687486287401E-03,0.)); +#297459 = ADVANCED_FACE('',(#297460),#297485,.T.); +#297460 = FACE_BOUND('',#297461,.T.); +#297461 = EDGE_LOOP('',(#297462,#297463,#297471,#297479)); +#297462 = ORIENTED_EDGE('',*,*,#297441,.T.); +#297463 = ORIENTED_EDGE('',*,*,#297464,.T.); +#297464 = EDGE_CURVE('',#297434,#297465,#297467,.T.); +#297465 = VERTEX_POINT('',#297466); +#297466 = CARTESIAN_POINT('',(124.655557,-64.616853,1.545)); +#297467 = LINE('',#297468,#297469); +#297468 = CARTESIAN_POINT('',(124.619509,-64.601921,1.545)); +#297469 = VECTOR('',#297470,1.); +#297470 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#297471 = ORIENTED_EDGE('',*,*,#297472,.F.); +#297472 = EDGE_CURVE('',#297473,#297465,#297475,.T.); +#297473 = VERTEX_POINT('',#297474); +#297474 = CARTESIAN_POINT('',(124.655557,-64.616853,1.51)); +#297475 = LINE('',#297476,#297477); +#297476 = CARTESIAN_POINT('',(124.655557,-64.616853,1.51)); +#297477 = VECTOR('',#297478,1.); +#297478 = DIRECTION('',(0.,0.,1.)); +#297479 = ORIENTED_EDGE('',*,*,#297480,.F.); +#297480 = EDGE_CURVE('',#297442,#297473,#297481,.T.); +#297481 = LINE('',#297482,#297483); +#297482 = CARTESIAN_POINT('',(124.619509,-64.601921,1.51)); +#297483 = VECTOR('',#297484,1.); +#297484 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#297485 = PLANE('',#297486); +#297486 = AXIS2_PLACEMENT_3D('',#297487,#297488,#297489); +#297487 = CARTESIAN_POINT('',(124.619509,-64.601921,1.51)); +#297488 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#297489 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#297490 = ADVANCED_FACE('',(#297491),#297516,.T.); +#297491 = FACE_BOUND('',#297492,.T.); +#297492 = EDGE_LOOP('',(#297493,#297494,#297502,#297510)); +#297493 = ORIENTED_EDGE('',*,*,#297472,.T.); +#297494 = ORIENTED_EDGE('',*,*,#297495,.T.); +#297495 = EDGE_CURVE('',#297465,#297496,#297498,.T.); +#297496 = VERTEX_POINT('',#297497); +#297497 = CARTESIAN_POINT('',(126.341422,-66.3,1.545)); +#297498 = LINE('',#297499,#297500); +#297499 = CARTESIAN_POINT('',(124.655557,-64.616853,1.545)); +#297500 = VECTOR('',#297501,1.); +#297501 = DIRECTION('',(0.707677019683,-0.706536082456,0.)); +#297502 = ORIENTED_EDGE('',*,*,#297503,.F.); +#297503 = EDGE_CURVE('',#297504,#297496,#297506,.T.); +#297504 = VERTEX_POINT('',#297505); +#297505 = CARTESIAN_POINT('',(126.341422,-66.3,1.51)); +#297506 = LINE('',#297507,#297508); +#297507 = CARTESIAN_POINT('',(126.341422,-66.3,1.51)); +#297508 = VECTOR('',#297509,1.); +#297509 = DIRECTION('',(0.,0.,1.)); +#297510 = ORIENTED_EDGE('',*,*,#297511,.F.); +#297511 = EDGE_CURVE('',#297473,#297504,#297512,.T.); +#297512 = LINE('',#297513,#297514); +#297513 = CARTESIAN_POINT('',(124.655557,-64.616853,1.51)); +#297514 = VECTOR('',#297515,1.); +#297515 = DIRECTION('',(0.707677019683,-0.706536082456,0.)); +#297516 = PLANE('',#297517); +#297517 = AXIS2_PLACEMENT_3D('',#297518,#297519,#297520); +#297518 = CARTESIAN_POINT('',(124.655557,-64.616853,1.51)); +#297519 = DIRECTION('',(0.706536082456,0.707677019683,-0.)); +#297520 = DIRECTION('',(0.707677019683,-0.706536082456,0.)); +#297521 = ADVANCED_FACE('',(#297522),#297547,.T.); +#297522 = FACE_BOUND('',#297523,.T.); +#297523 = EDGE_LOOP('',(#297524,#297525,#297533,#297541)); +#297524 = ORIENTED_EDGE('',*,*,#297503,.T.); +#297525 = ORIENTED_EDGE('',*,*,#297526,.T.); +#297526 = EDGE_CURVE('',#297496,#297527,#297529,.T.); +#297527 = VERTEX_POINT('',#297528); +#297528 = CARTESIAN_POINT('',(126.459509,-66.301921,1.545)); +#297529 = LINE('',#297530,#297531); +#297530 = CARTESIAN_POINT('',(126.341422,-66.3,1.545)); +#297531 = VECTOR('',#297532,1.); +#297532 = DIRECTION('',(0.999867707761,-1.626551497289E-02,0.)); +#297533 = ORIENTED_EDGE('',*,*,#297534,.F.); +#297534 = EDGE_CURVE('',#297535,#297527,#297537,.T.); +#297535 = VERTEX_POINT('',#297536); +#297536 = CARTESIAN_POINT('',(126.459509,-66.301921,1.51)); +#297537 = LINE('',#297538,#297539); +#297538 = CARTESIAN_POINT('',(126.459509,-66.301921,1.51)); +#297539 = VECTOR('',#297540,1.); +#297540 = DIRECTION('',(0.,0.,1.)); +#297541 = ORIENTED_EDGE('',*,*,#297542,.F.); +#297542 = EDGE_CURVE('',#297504,#297535,#297543,.T.); +#297543 = LINE('',#297544,#297545); +#297544 = CARTESIAN_POINT('',(126.341422,-66.3,1.51)); +#297545 = VECTOR('',#297546,1.); +#297546 = DIRECTION('',(0.999867707761,-1.626551497289E-02,0.)); +#297547 = PLANE('',#297548); +#297548 = AXIS2_PLACEMENT_3D('',#297549,#297550,#297551); +#297549 = CARTESIAN_POINT('',(126.341422,-66.3,1.51)); +#297550 = DIRECTION('',(1.626551497289E-02,0.999867707761,-0.)); +#297551 = DIRECTION('',(0.999867707761,-1.626551497289E-02,0.)); +#297552 = ADVANCED_FACE('',(#297553),#297580,.T.); +#297553 = FACE_BOUND('',#297554,.T.); +#297554 = EDGE_LOOP('',(#297555,#297556,#297565,#297573)); +#297555 = ORIENTED_EDGE('',*,*,#297534,.T.); +#297556 = ORIENTED_EDGE('',*,*,#297557,.T.); +#297557 = EDGE_CURVE('',#297527,#297558,#297560,.T.); +#297558 = VERTEX_POINT('',#297559); +#297559 = CARTESIAN_POINT('',(126.459509,-66.498079,1.545)); +#297560 = CIRCLE('',#297561,0.100000456609); +#297561 = AXIS2_PLACEMENT_3D('',#297562,#297563,#297564); +#297562 = CARTESIAN_POINT('',(126.44,-66.4,1.545)); +#297563 = DIRECTION('',(0.,0.,-1.)); +#297564 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#297565 = ORIENTED_EDGE('',*,*,#297566,.F.); +#297566 = EDGE_CURVE('',#297567,#297558,#297569,.T.); +#297567 = VERTEX_POINT('',#297568); +#297568 = CARTESIAN_POINT('',(126.459509,-66.498079,1.51)); +#297569 = LINE('',#297570,#297571); +#297570 = CARTESIAN_POINT('',(126.459509,-66.498079,1.51)); +#297571 = VECTOR('',#297572,1.); +#297572 = DIRECTION('',(0.,0.,1.)); +#297573 = ORIENTED_EDGE('',*,*,#297574,.F.); +#297574 = EDGE_CURVE('',#297535,#297567,#297575,.T.); +#297575 = CIRCLE('',#297576,0.100000456609); +#297576 = AXIS2_PLACEMENT_3D('',#297577,#297578,#297579); +#297577 = CARTESIAN_POINT('',(126.44,-66.4,1.51)); +#297578 = DIRECTION('',(0.,0.,-1.)); +#297579 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#297580 = CYLINDRICAL_SURFACE('',#297581,0.100000456609); +#297581 = AXIS2_PLACEMENT_3D('',#297582,#297583,#297584); +#297582 = CARTESIAN_POINT('',(126.44,-66.4,1.51)); +#297583 = DIRECTION('',(0.,0.,-1.)); +#297584 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#297585 = ADVANCED_FACE('',(#297586),#297611,.T.); +#297586 = FACE_BOUND('',#297587,.T.); +#297587 = EDGE_LOOP('',(#297588,#297589,#297597,#297605)); +#297588 = ORIENTED_EDGE('',*,*,#297566,.T.); +#297589 = ORIENTED_EDGE('',*,*,#297590,.T.); +#297590 = EDGE_CURVE('',#297558,#297591,#297593,.T.); +#297591 = VERTEX_POINT('',#297592); +#297592 = CARTESIAN_POINT('',(126.280491,-66.498079,1.545)); +#297593 = LINE('',#297594,#297595); +#297594 = CARTESIAN_POINT('',(126.459509,-66.498079,1.545)); +#297595 = VECTOR('',#297596,1.); +#297596 = DIRECTION('',(-1.,0.,0.)); +#297597 = ORIENTED_EDGE('',*,*,#297598,.F.); +#297598 = EDGE_CURVE('',#297599,#297591,#297601,.T.); +#297599 = VERTEX_POINT('',#297600); +#297600 = CARTESIAN_POINT('',(126.280491,-66.498079,1.51)); +#297601 = LINE('',#297602,#297603); +#297602 = CARTESIAN_POINT('',(126.280491,-66.498079,1.51)); +#297603 = VECTOR('',#297604,1.); +#297604 = DIRECTION('',(0.,0.,1.)); +#297605 = ORIENTED_EDGE('',*,*,#297606,.F.); +#297606 = EDGE_CURVE('',#297567,#297599,#297607,.T.); +#297607 = LINE('',#297608,#297609); +#297608 = CARTESIAN_POINT('',(126.459509,-66.498079,1.51)); +#297609 = VECTOR('',#297610,1.); +#297610 = DIRECTION('',(-1.,0.,0.)); +#297611 = PLANE('',#297612); +#297612 = AXIS2_PLACEMENT_3D('',#297613,#297614,#297615); +#297613 = CARTESIAN_POINT('',(126.459509,-66.498079,1.51)); +#297614 = DIRECTION('',(0.,-1.,0.)); +#297615 = DIRECTION('',(-1.,0.,0.)); +#297616 = ADVANCED_FACE('',(#297617),#297642,.T.); +#297617 = FACE_BOUND('',#297618,.T.); +#297618 = EDGE_LOOP('',(#297619,#297620,#297628,#297636)); +#297619 = ORIENTED_EDGE('',*,*,#297598,.T.); +#297620 = ORIENTED_EDGE('',*,*,#297621,.T.); +#297621 = EDGE_CURVE('',#297591,#297622,#297624,.T.); +#297622 = VERTEX_POINT('',#297623); +#297623 = CARTESIAN_POINT('',(126.244443,-66.483147,1.545)); +#297624 = LINE('',#297625,#297626); +#297625 = CARTESIAN_POINT('',(126.280491,-66.498079,1.545)); +#297626 = VECTOR('',#297627,1.); +#297627 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297628 = ORIENTED_EDGE('',*,*,#297629,.F.); +#297629 = EDGE_CURVE('',#297630,#297622,#297632,.T.); +#297630 = VERTEX_POINT('',#297631); +#297631 = CARTESIAN_POINT('',(126.244443,-66.483147,1.51)); +#297632 = LINE('',#297633,#297634); +#297633 = CARTESIAN_POINT('',(126.244443,-66.483147,1.51)); +#297634 = VECTOR('',#297635,1.); +#297635 = DIRECTION('',(0.,0.,1.)); +#297636 = ORIENTED_EDGE('',*,*,#297637,.F.); +#297637 = EDGE_CURVE('',#297599,#297630,#297638,.T.); +#297638 = LINE('',#297639,#297640); +#297639 = CARTESIAN_POINT('',(126.280491,-66.498079,1.51)); +#297640 = VECTOR('',#297641,1.); +#297641 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297642 = PLANE('',#297643); +#297643 = AXIS2_PLACEMENT_3D('',#297644,#297645,#297646); +#297644 = CARTESIAN_POINT('',(126.280491,-66.498079,1.51)); +#297645 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#297646 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297647 = ADVANCED_FACE('',(#297648),#297673,.T.); +#297648 = FACE_BOUND('',#297649,.T.); +#297649 = EDGE_LOOP('',(#297650,#297651,#297659,#297667)); +#297650 = ORIENTED_EDGE('',*,*,#297629,.T.); +#297651 = ORIENTED_EDGE('',*,*,#297652,.T.); +#297652 = EDGE_CURVE('',#297622,#297653,#297655,.T.); +#297653 = VERTEX_POINT('',#297654); +#297654 = CARTESIAN_POINT('',(124.558578,-64.8,1.545)); +#297655 = LINE('',#297656,#297657); +#297656 = CARTESIAN_POINT('',(126.244443,-66.483147,1.545)); +#297657 = VECTOR('',#297658,1.); +#297658 = DIRECTION('',(-0.707677019683,0.706536082456,0.)); +#297659 = ORIENTED_EDGE('',*,*,#297660,.F.); +#297660 = EDGE_CURVE('',#297661,#297653,#297663,.T.); +#297661 = VERTEX_POINT('',#297662); +#297662 = CARTESIAN_POINT('',(124.558578,-64.8,1.51)); +#297663 = LINE('',#297664,#297665); +#297664 = CARTESIAN_POINT('',(124.558578,-64.8,1.51)); +#297665 = VECTOR('',#297666,1.); +#297666 = DIRECTION('',(0.,0.,1.)); +#297667 = ORIENTED_EDGE('',*,*,#297668,.F.); +#297668 = EDGE_CURVE('',#297630,#297661,#297669,.T.); +#297669 = LINE('',#297670,#297671); +#297670 = CARTESIAN_POINT('',(126.244443,-66.483147,1.51)); +#297671 = VECTOR('',#297672,1.); +#297672 = DIRECTION('',(-0.707677019683,0.706536082456,0.)); +#297673 = PLANE('',#297674); +#297674 = AXIS2_PLACEMENT_3D('',#297675,#297676,#297677); +#297675 = CARTESIAN_POINT('',(126.244443,-66.483147,1.51)); +#297676 = DIRECTION('',(-0.706536082456,-0.707677019683,0.)); +#297677 = DIRECTION('',(-0.707677019683,0.706536082456,0.)); +#297678 = ADVANCED_FACE('',(#297679),#297704,.T.); +#297679 = FACE_BOUND('',#297680,.T.); +#297680 = EDGE_LOOP('',(#297681,#297682,#297690,#297698)); +#297681 = ORIENTED_EDGE('',*,*,#297660,.T.); +#297682 = ORIENTED_EDGE('',*,*,#297683,.T.); +#297683 = EDGE_CURVE('',#297653,#297684,#297686,.T.); +#297684 = VERTEX_POINT('',#297685); +#297685 = CARTESIAN_POINT('',(123.380491,-64.798079,1.545)); +#297686 = LINE('',#297687,#297688); +#297687 = CARTESIAN_POINT('',(124.558578,-64.8,1.545)); +#297688 = VECTOR('',#297689,1.); +#297689 = DIRECTION('',(-0.999998670559,1.630607456104E-03,0.)); +#297690 = ORIENTED_EDGE('',*,*,#297691,.F.); +#297691 = EDGE_CURVE('',#297692,#297684,#297694,.T.); +#297692 = VERTEX_POINT('',#297693); +#297693 = CARTESIAN_POINT('',(123.380491,-64.798079,1.51)); +#297694 = LINE('',#297695,#297696); +#297695 = CARTESIAN_POINT('',(123.380491,-64.798079,1.51)); +#297696 = VECTOR('',#297697,1.); +#297697 = DIRECTION('',(0.,0.,1.)); +#297698 = ORIENTED_EDGE('',*,*,#297699,.F.); +#297699 = EDGE_CURVE('',#297661,#297692,#297700,.T.); +#297700 = LINE('',#297701,#297702); +#297701 = CARTESIAN_POINT('',(124.558578,-64.8,1.51)); +#297702 = VECTOR('',#297703,1.); +#297703 = DIRECTION('',(-0.999998670559,1.630607456104E-03,0.)); +#297704 = PLANE('',#297705); +#297705 = AXIS2_PLACEMENT_3D('',#297706,#297707,#297708); +#297706 = CARTESIAN_POINT('',(124.558578,-64.8,1.51)); +#297707 = DIRECTION('',(-1.630607456104E-03,-0.999998670559,0.)); +#297708 = DIRECTION('',(-0.999998670559,1.630607456104E-03,0.)); +#297709 = ADVANCED_FACE('',(#297710),#297735,.T.); +#297710 = FACE_BOUND('',#297711,.T.); +#297711 = EDGE_LOOP('',(#297712,#297713,#297721,#297729)); +#297712 = ORIENTED_EDGE('',*,*,#297691,.T.); +#297713 = ORIENTED_EDGE('',*,*,#297714,.T.); +#297714 = EDGE_CURVE('',#297684,#297715,#297717,.T.); +#297715 = VERTEX_POINT('',#297716); +#297716 = CARTESIAN_POINT('',(123.344443,-64.783147,1.545)); +#297717 = LINE('',#297718,#297719); +#297718 = CARTESIAN_POINT('',(123.380491,-64.798079,1.545)); +#297719 = VECTOR('',#297720,1.); +#297720 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297721 = ORIENTED_EDGE('',*,*,#297722,.F.); +#297722 = EDGE_CURVE('',#297723,#297715,#297725,.T.); +#297723 = VERTEX_POINT('',#297724); +#297724 = CARTESIAN_POINT('',(123.344443,-64.783147,1.51)); +#297725 = LINE('',#297726,#297727); +#297726 = CARTESIAN_POINT('',(123.344443,-64.783147,1.51)); +#297727 = VECTOR('',#297728,1.); +#297728 = DIRECTION('',(0.,0.,1.)); +#297729 = ORIENTED_EDGE('',*,*,#297730,.F.); +#297730 = EDGE_CURVE('',#297692,#297723,#297731,.T.); +#297731 = LINE('',#297732,#297733); +#297732 = CARTESIAN_POINT('',(123.380491,-64.798079,1.51)); +#297733 = VECTOR('',#297734,1.); +#297734 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297735 = PLANE('',#297736); +#297736 = AXIS2_PLACEMENT_3D('',#297737,#297738,#297739); +#297737 = CARTESIAN_POINT('',(123.380491,-64.798079,1.51)); +#297738 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#297739 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297740 = ADVANCED_FACE('',(#297741),#297766,.T.); +#297741 = FACE_BOUND('',#297742,.T.); +#297742 = EDGE_LOOP('',(#297743,#297744,#297752,#297760)); +#297743 = ORIENTED_EDGE('',*,*,#297722,.T.); +#297744 = ORIENTED_EDGE('',*,*,#297745,.T.); +#297745 = EDGE_CURVE('',#297715,#297746,#297748,.T.); +#297746 = VERTEX_POINT('',#297747); +#297747 = CARTESIAN_POINT('',(123.328079,-64.7695,1.545)); +#297748 = LINE('',#297749,#297750); +#297749 = CARTESIAN_POINT('',(123.344443,-64.783147,1.545)); +#297750 = VECTOR('',#297751,1.); +#297751 = DIRECTION('',(-0.767982723288,0.640470558832,0.)); +#297752 = ORIENTED_EDGE('',*,*,#297753,.F.); +#297753 = EDGE_CURVE('',#297754,#297746,#297756,.T.); +#297754 = VERTEX_POINT('',#297755); +#297755 = CARTESIAN_POINT('',(123.328079,-64.7695,1.51)); +#297756 = LINE('',#297757,#297758); +#297757 = CARTESIAN_POINT('',(123.328079,-64.7695,1.51)); +#297758 = VECTOR('',#297759,1.); +#297759 = DIRECTION('',(0.,0.,1.)); +#297760 = ORIENTED_EDGE('',*,*,#297761,.F.); +#297761 = EDGE_CURVE('',#297723,#297754,#297762,.T.); +#297762 = LINE('',#297763,#297764); +#297763 = CARTESIAN_POINT('',(123.344443,-64.783147,1.51)); +#297764 = VECTOR('',#297765,1.); +#297765 = DIRECTION('',(-0.767982723288,0.640470558832,0.)); +#297766 = PLANE('',#297767); +#297767 = AXIS2_PLACEMENT_3D('',#297768,#297769,#297770); +#297768 = CARTESIAN_POINT('',(123.344443,-64.783147,1.51)); +#297769 = DIRECTION('',(-0.640470558832,-0.767982723288,0.)); +#297770 = DIRECTION('',(-0.767982723288,0.640470558832,0.)); +#297771 = ADVANCED_FACE('',(#297772),#297797,.T.); +#297772 = FACE_BOUND('',#297773,.T.); +#297773 = EDGE_LOOP('',(#297774,#297775,#297783,#297791)); +#297774 = ORIENTED_EDGE('',*,*,#297753,.T.); +#297775 = ORIENTED_EDGE('',*,*,#297776,.T.); +#297776 = EDGE_CURVE('',#297746,#297777,#297779,.T.); +#297777 = VERTEX_POINT('',#297778); +#297778 = CARTESIAN_POINT('',(123.314805,-64.777164,1.545)); +#297779 = LINE('',#297780,#297781); +#297780 = CARTESIAN_POINT('',(123.328079,-64.7695,1.545)); +#297781 = VECTOR('',#297782,1.); +#297782 = DIRECTION('',(-0.866018269693,-0.500012356406,0.)); +#297783 = ORIENTED_EDGE('',*,*,#297784,.F.); +#297784 = EDGE_CURVE('',#297785,#297777,#297787,.T.); +#297785 = VERTEX_POINT('',#297786); +#297786 = CARTESIAN_POINT('',(123.314805,-64.777164,1.51)); +#297787 = LINE('',#297788,#297789); +#297788 = CARTESIAN_POINT('',(123.314805,-64.777164,1.51)); +#297789 = VECTOR('',#297790,1.); +#297790 = DIRECTION('',(0.,0.,1.)); +#297791 = ORIENTED_EDGE('',*,*,#297792,.F.); +#297792 = EDGE_CURVE('',#297754,#297785,#297793,.T.); +#297793 = LINE('',#297794,#297795); +#297794 = CARTESIAN_POINT('',(123.328079,-64.7695,1.51)); +#297795 = VECTOR('',#297796,1.); +#297796 = DIRECTION('',(-0.866018269693,-0.500012356406,0.)); +#297797 = PLANE('',#297798); +#297798 = AXIS2_PLACEMENT_3D('',#297799,#297800,#297801); +#297799 = CARTESIAN_POINT('',(123.328079,-64.7695,1.51)); +#297800 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#297801 = DIRECTION('',(-0.866018269693,-0.500012356406,0.)); +#297802 = ADVANCED_FACE('',(#297803),#297830,.T.); +#297803 = FACE_BOUND('',#297804,.T.); +#297804 = EDGE_LOOP('',(#297805,#297806,#297815,#297823)); +#297805 = ORIENTED_EDGE('',*,*,#297784,.T.); +#297806 = ORIENTED_EDGE('',*,*,#297807,.T.); +#297807 = EDGE_CURVE('',#297777,#297808,#297810,.T.); +#297808 = VERTEX_POINT('',#297809); +#297809 = CARTESIAN_POINT('',(123.085195,-64.222836,1.545)); +#297810 = CIRCLE('',#297811,0.300000118202); +#297811 = AXIS2_PLACEMENT_3D('',#297812,#297813,#297814); +#297812 = CARTESIAN_POINT('',(123.2,-64.5,1.545)); +#297813 = DIRECTION('',(0.,0.,-1.)); +#297814 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#297815 = ORIENTED_EDGE('',*,*,#297816,.F.); +#297816 = EDGE_CURVE('',#297817,#297808,#297819,.T.); +#297817 = VERTEX_POINT('',#297818); +#297818 = CARTESIAN_POINT('',(123.085195,-64.222836,1.51)); +#297819 = LINE('',#297820,#297821); +#297820 = CARTESIAN_POINT('',(123.085195,-64.222836,1.51)); +#297821 = VECTOR('',#297822,1.); +#297822 = DIRECTION('',(0.,0.,1.)); +#297823 = ORIENTED_EDGE('',*,*,#297824,.F.); +#297824 = EDGE_CURVE('',#297785,#297817,#297825,.T.); +#297825 = CIRCLE('',#297826,0.300000118202); +#297826 = AXIS2_PLACEMENT_3D('',#297827,#297828,#297829); +#297827 = CARTESIAN_POINT('',(123.2,-64.5,1.51)); +#297828 = DIRECTION('',(0.,0.,-1.)); +#297829 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#297830 = CYLINDRICAL_SURFACE('',#297831,0.300000118202); +#297831 = AXIS2_PLACEMENT_3D('',#297832,#297833,#297834); +#297832 = CARTESIAN_POINT('',(123.2,-64.5,1.51)); +#297833 = DIRECTION('',(0.,0.,-1.)); +#297834 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#297835 = ADVANCED_FACE('',(#297836),#297861,.T.); +#297836 = FACE_BOUND('',#297837,.T.); +#297837 = EDGE_LOOP('',(#297838,#297839,#297847,#297855)); +#297838 = ORIENTED_EDGE('',*,*,#297816,.T.); +#297839 = ORIENTED_EDGE('',*,*,#297840,.T.); +#297840 = EDGE_CURVE('',#297808,#297841,#297843,.T.); +#297841 = VERTEX_POINT('',#297842); +#297842 = CARTESIAN_POINT('',(123.1,-64.218869,1.545)); +#297843 = LINE('',#297844,#297845); +#297844 = CARTESIAN_POINT('',(123.085195,-64.222836,1.545)); +#297845 = VECTOR('',#297846,1.); +#297846 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#297847 = ORIENTED_EDGE('',*,*,#297848,.F.); +#297848 = EDGE_CURVE('',#297849,#297841,#297851,.T.); +#297849 = VERTEX_POINT('',#297850); +#297850 = CARTESIAN_POINT('',(123.1,-64.218869,1.51)); +#297851 = LINE('',#297852,#297853); +#297852 = CARTESIAN_POINT('',(123.1,-64.218869,1.51)); +#297853 = VECTOR('',#297854,1.); +#297854 = DIRECTION('',(0.,0.,1.)); +#297855 = ORIENTED_EDGE('',*,*,#297856,.F.); +#297856 = EDGE_CURVE('',#297817,#297849,#297857,.T.); +#297857 = LINE('',#297858,#297859); +#297858 = CARTESIAN_POINT('',(123.085195,-64.222836,1.51)); +#297859 = VECTOR('',#297860,1.); +#297860 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#297861 = PLANE('',#297862); +#297862 = AXIS2_PLACEMENT_3D('',#297863,#297864,#297865); +#297863 = CARTESIAN_POINT('',(123.085195,-64.222836,1.51)); +#297864 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#297865 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#297866 = ADVANCED_FACE('',(#297867),#297892,.T.); +#297867 = FACE_BOUND('',#297868,.T.); +#297868 = EDGE_LOOP('',(#297869,#297870,#297878,#297886)); +#297869 = ORIENTED_EDGE('',*,*,#297848,.T.); +#297870 = ORIENTED_EDGE('',*,*,#297871,.T.); +#297871 = EDGE_CURVE('',#297841,#297872,#297874,.T.); +#297872 = VERTEX_POINT('',#297873); +#297873 = CARTESIAN_POINT('',(123.101921,-64.180491,1.545)); +#297874 = LINE('',#297875,#297876); +#297875 = CARTESIAN_POINT('',(123.1,-64.218869,1.545)); +#297876 = VECTOR('',#297877,1.); +#297877 = DIRECTION('',(4.999213101394E-02,0.998749611683,0.)); +#297878 = ORIENTED_EDGE('',*,*,#297879,.F.); +#297879 = EDGE_CURVE('',#297880,#297872,#297882,.T.); +#297880 = VERTEX_POINT('',#297881); +#297881 = CARTESIAN_POINT('',(123.101921,-64.180491,1.51)); +#297882 = LINE('',#297883,#297884); +#297883 = CARTESIAN_POINT('',(123.101921,-64.180491,1.51)); +#297884 = VECTOR('',#297885,1.); +#297885 = DIRECTION('',(0.,0.,1.)); +#297886 = ORIENTED_EDGE('',*,*,#297887,.F.); +#297887 = EDGE_CURVE('',#297849,#297880,#297888,.T.); +#297888 = LINE('',#297889,#297890); +#297889 = CARTESIAN_POINT('',(123.1,-64.218869,1.51)); +#297890 = VECTOR('',#297891,1.); +#297891 = DIRECTION('',(4.999213101394E-02,0.998749611683,0.)); +#297892 = PLANE('',#297893); +#297893 = AXIS2_PLACEMENT_3D('',#297894,#297895,#297896); +#297894 = CARTESIAN_POINT('',(123.1,-64.218869,1.51)); +#297895 = DIRECTION('',(-0.998749611683,4.999213101394E-02,0.)); +#297896 = DIRECTION('',(4.999213101394E-02,0.998749611683,0.)); +#297897 = ADVANCED_FACE('',(#297898),#297923,.T.); +#297898 = FACE_BOUND('',#297899,.T.); +#297899 = EDGE_LOOP('',(#297900,#297901,#297909,#297917)); +#297900 = ORIENTED_EDGE('',*,*,#297879,.T.); +#297901 = ORIENTED_EDGE('',*,*,#297902,.T.); +#297902 = EDGE_CURVE('',#297872,#297903,#297905,.T.); +#297903 = VERTEX_POINT('',#297904); +#297904 = CARTESIAN_POINT('',(123.116853,-64.144443,1.545)); +#297905 = LINE('',#297906,#297907); +#297906 = CARTESIAN_POINT('',(123.101921,-64.180491,1.545)); +#297907 = VECTOR('',#297908,1.); +#297908 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#297909 = ORIENTED_EDGE('',*,*,#297910,.F.); +#297910 = EDGE_CURVE('',#297911,#297903,#297913,.T.); +#297911 = VERTEX_POINT('',#297912); +#297912 = CARTESIAN_POINT('',(123.116853,-64.144443,1.51)); +#297913 = LINE('',#297914,#297915); +#297914 = CARTESIAN_POINT('',(123.116853,-64.144443,1.51)); +#297915 = VECTOR('',#297916,1.); +#297916 = DIRECTION('',(0.,0.,1.)); +#297917 = ORIENTED_EDGE('',*,*,#297918,.F.); +#297918 = EDGE_CURVE('',#297880,#297911,#297919,.T.); +#297919 = LINE('',#297920,#297921); +#297920 = CARTESIAN_POINT('',(123.101921,-64.180491,1.51)); +#297921 = VECTOR('',#297922,1.); +#297922 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#297923 = PLANE('',#297924); +#297924 = AXIS2_PLACEMENT_3D('',#297925,#297926,#297927); +#297925 = CARTESIAN_POINT('',(123.101921,-64.180491,1.51)); +#297926 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#297927 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#297928 = ADVANCED_FACE('',(#297929),#297954,.T.); +#297929 = FACE_BOUND('',#297930,.T.); +#297930 = EDGE_LOOP('',(#297931,#297932,#297940,#297948)); +#297931 = ORIENTED_EDGE('',*,*,#297910,.T.); +#297932 = ORIENTED_EDGE('',*,*,#297933,.T.); +#297933 = EDGE_CURVE('',#297903,#297934,#297936,.T.); +#297934 = VERTEX_POINT('',#297935); +#297935 = CARTESIAN_POINT('',(123.55,-63.708578,1.545)); +#297936 = LINE('',#297937,#297938); +#297937 = CARTESIAN_POINT('',(123.116853,-64.144443,1.545)); +#297938 = VECTOR('',#297939,1.); +#297939 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#297940 = ORIENTED_EDGE('',*,*,#297941,.F.); +#297941 = EDGE_CURVE('',#297942,#297934,#297944,.T.); +#297942 = VERTEX_POINT('',#297943); +#297943 = CARTESIAN_POINT('',(123.55,-63.708578,1.51)); +#297944 = LINE('',#297945,#297946); +#297945 = CARTESIAN_POINT('',(123.55,-63.708578,1.51)); +#297946 = VECTOR('',#297947,1.); +#297947 = DIRECTION('',(0.,0.,1.)); +#297948 = ORIENTED_EDGE('',*,*,#297949,.F.); +#297949 = EDGE_CURVE('',#297911,#297942,#297950,.T.); +#297950 = LINE('',#297951,#297952); +#297951 = CARTESIAN_POINT('',(123.116853,-64.144443,1.51)); +#297952 = VECTOR('',#297953,1.); +#297953 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#297954 = PLANE('',#297955); +#297955 = AXIS2_PLACEMENT_3D('',#297956,#297957,#297958); +#297956 = CARTESIAN_POINT('',(123.116853,-64.144443,1.51)); +#297957 = DIRECTION('',(-0.709314922471,0.704891722721,0.)); +#297958 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#297959 = ADVANCED_FACE('',(#297960),#297976,.T.); +#297960 = FACE_BOUND('',#297961,.T.); +#297961 = EDGE_LOOP('',(#297962,#297963,#297969,#297970)); +#297962 = ORIENTED_EDGE('',*,*,#297941,.T.); +#297963 = ORIENTED_EDGE('',*,*,#297964,.T.); +#297964 = EDGE_CURVE('',#297934,#297048,#297965,.T.); +#297965 = LINE('',#297966,#297967); +#297966 = CARTESIAN_POINT('',(123.55,-63.708578,1.545)); +#297967 = VECTOR('',#297968,1.); +#297968 = DIRECTION('',(1.781857076833E-03,0.999998412491,0.)); +#297969 = ORIENTED_EDGE('',*,*,#297045,.F.); +#297970 = ORIENTED_EDGE('',*,*,#297971,.F.); +#297971 = EDGE_CURVE('',#297942,#297046,#297972,.T.); +#297972 = LINE('',#297973,#297974); +#297973 = CARTESIAN_POINT('',(123.55,-63.708578,1.51)); +#297974 = VECTOR('',#297975,1.); +#297975 = DIRECTION('',(1.781857076833E-03,0.999998412491,0.)); +#297976 = PLANE('',#297977); +#297977 = AXIS2_PLACEMENT_3D('',#297978,#297979,#297980); +#297978 = CARTESIAN_POINT('',(123.55,-63.708578,1.51)); +#297979 = DIRECTION('',(-0.999998412491,1.781857076833E-03,0.)); +#297980 = DIRECTION('',(1.781857076833E-03,0.999998412491,0.)); +#297981 = ADVANCED_FACE('',(#297982),#298009,.F.); +#297982 = FACE_BOUND('',#297983,.T.); +#297983 = EDGE_LOOP('',(#297984,#297994,#298001,#298002)); +#297984 = ORIENTED_EDGE('',*,*,#297985,.T.); +#297985 = EDGE_CURVE('',#297986,#297988,#297990,.T.); +#297986 = VERTEX_POINT('',#297987); +#297987 = CARTESIAN_POINT('',(123.337255,-64.5,1.51)); +#297988 = VERTEX_POINT('',#297989); +#297989 = CARTESIAN_POINT('',(123.337255,-64.5,1.545)); +#297990 = LINE('',#297991,#297992); +#297991 = CARTESIAN_POINT('',(123.337255,-64.5,1.51)); +#297992 = VECTOR('',#297993,1.); +#297993 = DIRECTION('',(0.,0.,1.)); +#297994 = ORIENTED_EDGE('',*,*,#297995,.T.); +#297995 = EDGE_CURVE('',#297988,#297988,#297996,.T.); +#297996 = CIRCLE('',#297997,0.137255); +#297997 = AXIS2_PLACEMENT_3D('',#297998,#297999,#298000); +#297998 = CARTESIAN_POINT('',(123.2,-64.5,1.545)); +#297999 = DIRECTION('',(0.,0.,1.)); +#298000 = DIRECTION('',(1.,0.,-0.)); +#298001 = ORIENTED_EDGE('',*,*,#297985,.F.); +#298002 = ORIENTED_EDGE('',*,*,#298003,.F.); +#298003 = EDGE_CURVE('',#297986,#297986,#298004,.T.); +#298004 = CIRCLE('',#298005,0.137255); +#298005 = AXIS2_PLACEMENT_3D('',#298006,#298007,#298008); +#298006 = CARTESIAN_POINT('',(123.2,-64.5,1.51)); +#298007 = DIRECTION('',(0.,0.,1.)); +#298008 = DIRECTION('',(1.,0.,-0.)); +#298009 = CYLINDRICAL_SURFACE('',#298010,0.137255); +#298010 = AXIS2_PLACEMENT_3D('',#298011,#298012,#298013); +#298011 = CARTESIAN_POINT('',(123.2,-64.5,1.51)); +#298012 = DIRECTION('',(-0.,-0.,-1.)); +#298013 = DIRECTION('',(1.,0.,-0.)); +#298014 = ADVANCED_FACE('',(#298015,#298047),#298050,.F.); +#298015 = FACE_BOUND('',#298016,.T.); +#298016 = EDGE_LOOP('',(#298017,#298018,#298019,#298020,#298021,#298022, + #298023,#298024,#298025,#298026,#298027,#298028,#298029,#298030, + #298031,#298032,#298033,#298034,#298035,#298036,#298037,#298038, + #298039,#298040,#298041,#298042,#298043,#298044,#298045,#298046)); +#298017 = ORIENTED_EDGE('',*,*,#297072,.T.); +#298018 = ORIENTED_EDGE('',*,*,#297104,.T.); +#298019 = ORIENTED_EDGE('',*,*,#297135,.T.); +#298020 = ORIENTED_EDGE('',*,*,#297166,.T.); +#298021 = ORIENTED_EDGE('',*,*,#297198,.T.); +#298022 = ORIENTED_EDGE('',*,*,#297230,.T.); +#298023 = ORIENTED_EDGE('',*,*,#297261,.T.); +#298024 = ORIENTED_EDGE('',*,*,#297292,.T.); +#298025 = ORIENTED_EDGE('',*,*,#297324,.T.); +#298026 = ORIENTED_EDGE('',*,*,#297356,.T.); +#298027 = ORIENTED_EDGE('',*,*,#297387,.T.); +#298028 = ORIENTED_EDGE('',*,*,#297418,.T.); +#298029 = ORIENTED_EDGE('',*,*,#297449,.T.); +#298030 = ORIENTED_EDGE('',*,*,#297480,.T.); +#298031 = ORIENTED_EDGE('',*,*,#297511,.T.); +#298032 = ORIENTED_EDGE('',*,*,#297542,.T.); +#298033 = ORIENTED_EDGE('',*,*,#297574,.T.); +#298034 = ORIENTED_EDGE('',*,*,#297606,.T.); +#298035 = ORIENTED_EDGE('',*,*,#297637,.T.); +#298036 = ORIENTED_EDGE('',*,*,#297668,.T.); +#298037 = ORIENTED_EDGE('',*,*,#297699,.T.); +#298038 = ORIENTED_EDGE('',*,*,#297730,.T.); +#298039 = ORIENTED_EDGE('',*,*,#297761,.T.); +#298040 = ORIENTED_EDGE('',*,*,#297792,.T.); +#298041 = ORIENTED_EDGE('',*,*,#297824,.T.); +#298042 = ORIENTED_EDGE('',*,*,#297856,.T.); +#298043 = ORIENTED_EDGE('',*,*,#297887,.T.); +#298044 = ORIENTED_EDGE('',*,*,#297918,.T.); +#298045 = ORIENTED_EDGE('',*,*,#297949,.T.); +#298046 = ORIENTED_EDGE('',*,*,#297971,.T.); +#298047 = FACE_BOUND('',#298048,.T.); +#298048 = EDGE_LOOP('',(#298049)); +#298049 = ORIENTED_EDGE('',*,*,#298003,.T.); +#298050 = PLANE('',#298051); +#298051 = AXIS2_PLACEMENT_3D('',#298052,#298053,#298054); +#298052 = CARTESIAN_POINT('',(0.,0.,1.51)); +#298053 = DIRECTION('',(0.,0.,1.)); +#298054 = DIRECTION('',(1.,0.,-0.)); +#298055 = ADVANCED_FACE('',(#298056,#298088),#298091,.T.); +#298056 = FACE_BOUND('',#298057,.F.); +#298057 = EDGE_LOOP('',(#298058,#298059,#298060,#298061,#298062,#298063, + #298064,#298065,#298066,#298067,#298068,#298069,#298070,#298071, + #298072,#298073,#298074,#298075,#298076,#298077,#298078,#298079, + #298080,#298081,#298082,#298083,#298084,#298085,#298086,#298087)); +#298058 = ORIENTED_EDGE('',*,*,#297055,.T.); +#298059 = ORIENTED_EDGE('',*,*,#297088,.T.); +#298060 = ORIENTED_EDGE('',*,*,#297119,.T.); +#298061 = ORIENTED_EDGE('',*,*,#297150,.T.); +#298062 = ORIENTED_EDGE('',*,*,#297181,.T.); +#298063 = ORIENTED_EDGE('',*,*,#297214,.T.); +#298064 = ORIENTED_EDGE('',*,*,#297245,.T.); +#298065 = ORIENTED_EDGE('',*,*,#297276,.T.); +#298066 = ORIENTED_EDGE('',*,*,#297307,.T.); +#298067 = ORIENTED_EDGE('',*,*,#297340,.T.); +#298068 = ORIENTED_EDGE('',*,*,#297371,.T.); +#298069 = ORIENTED_EDGE('',*,*,#297402,.T.); +#298070 = ORIENTED_EDGE('',*,*,#297433,.T.); +#298071 = ORIENTED_EDGE('',*,*,#297464,.T.); +#298072 = ORIENTED_EDGE('',*,*,#297495,.T.); +#298073 = ORIENTED_EDGE('',*,*,#297526,.T.); +#298074 = ORIENTED_EDGE('',*,*,#297557,.T.); +#298075 = ORIENTED_EDGE('',*,*,#297590,.T.); +#298076 = ORIENTED_EDGE('',*,*,#297621,.T.); +#298077 = ORIENTED_EDGE('',*,*,#297652,.T.); +#298078 = ORIENTED_EDGE('',*,*,#297683,.T.); +#298079 = ORIENTED_EDGE('',*,*,#297714,.T.); +#298080 = ORIENTED_EDGE('',*,*,#297745,.T.); +#298081 = ORIENTED_EDGE('',*,*,#297776,.T.); +#298082 = ORIENTED_EDGE('',*,*,#297807,.T.); +#298083 = ORIENTED_EDGE('',*,*,#297840,.T.); +#298084 = ORIENTED_EDGE('',*,*,#297871,.T.); +#298085 = ORIENTED_EDGE('',*,*,#297902,.T.); +#298086 = ORIENTED_EDGE('',*,*,#297933,.T.); +#298087 = ORIENTED_EDGE('',*,*,#297964,.T.); +#298088 = FACE_BOUND('',#298089,.F.); +#298089 = EDGE_LOOP('',(#298090)); +#298090 = ORIENTED_EDGE('',*,*,#297995,.T.); +#298091 = PLANE('',#298092); +#298092 = AXIS2_PLACEMENT_3D('',#298093,#298094,#298095); +#298093 = CARTESIAN_POINT('',(0.,0.,1.545)); +#298094 = DIRECTION('',(0.,0.,1.)); +#298095 = DIRECTION('',(1.,0.,-0.)); +#298096 = MANIFOLD_SOLID_BREP('',#298097); +#298097 = CLOSED_SHELL('',(#298098,#298140,#298171,#298202,#298233, + #298264,#298295,#298326,#298357,#298390,#298421,#298452,#298483, + #298514,#298545,#298576,#298607,#298629,#298662,#298690)); +#298098 = ADVANCED_FACE('',(#298099),#298135,.T.); +#298099 = FACE_BOUND('',#298100,.T.); +#298100 = EDGE_LOOP('',(#298101,#298111,#298120,#298128)); +#298101 = ORIENTED_EDGE('',*,*,#298102,.T.); +#298102 = EDGE_CURVE('',#298103,#298105,#298107,.T.); +#298103 = VERTEX_POINT('',#298104); +#298104 = CARTESIAN_POINT('',(151.294443,-62.566853,1.51)); +#298105 = VERTEX_POINT('',#298106); +#298106 = CARTESIAN_POINT('',(151.294443,-62.566853,1.545)); +#298107 = LINE('',#298108,#298109); +#298108 = CARTESIAN_POINT('',(151.294443,-62.566853,1.51)); +#298109 = VECTOR('',#298110,1.); +#298110 = DIRECTION('',(0.,0.,1.)); +#298111 = ORIENTED_EDGE('',*,*,#298112,.T.); +#298112 = EDGE_CURVE('',#298105,#298113,#298115,.T.); +#298113 = VERTEX_POINT('',#298114); +#298114 = CARTESIAN_POINT('',(151.448079,-62.630491,1.545)); +#298115 = CIRCLE('',#298116,0.100000590676); +#298116 = AXIS2_PLACEMENT_3D('',#298117,#298118,#298119); +#298117 = CARTESIAN_POINT('',(151.35,-62.6500006872,1.545)); +#298118 = DIRECTION('',(0.,0.,-1.)); +#298119 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#298120 = ORIENTED_EDGE('',*,*,#298121,.F.); +#298121 = EDGE_CURVE('',#298122,#298113,#298124,.T.); +#298122 = VERTEX_POINT('',#298123); +#298123 = CARTESIAN_POINT('',(151.448079,-62.630491,1.51)); +#298124 = LINE('',#298125,#298126); +#298125 = CARTESIAN_POINT('',(151.448079,-62.630491,1.51)); +#298126 = VECTOR('',#298127,1.); +#298127 = DIRECTION('',(0.,0.,1.)); +#298128 = ORIENTED_EDGE('',*,*,#298129,.F.); +#298129 = EDGE_CURVE('',#298103,#298122,#298130,.T.); +#298130 = CIRCLE('',#298131,0.100000590676); +#298131 = AXIS2_PLACEMENT_3D('',#298132,#298133,#298134); +#298132 = CARTESIAN_POINT('',(151.35,-62.6500006872,1.51)); +#298133 = DIRECTION('',(0.,0.,-1.)); +#298134 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#298135 = CYLINDRICAL_SURFACE('',#298136,0.100000590676); +#298136 = AXIS2_PLACEMENT_3D('',#298137,#298138,#298139); +#298137 = CARTESIAN_POINT('',(151.35,-62.6500006872,1.51)); +#298138 = DIRECTION('',(0.,0.,-1.)); +#298139 = DIRECTION('',(-0.555566718399,0.831471960687,0.)); +#298140 = ADVANCED_FACE('',(#298141),#298166,.T.); +#298141 = FACE_BOUND('',#298142,.T.); +#298142 = EDGE_LOOP('',(#298143,#298144,#298152,#298160)); +#298143 = ORIENTED_EDGE('',*,*,#298121,.T.); +#298144 = ORIENTED_EDGE('',*,*,#298145,.T.); +#298145 = EDGE_CURVE('',#298113,#298146,#298148,.T.); +#298146 = VERTEX_POINT('',#298147); +#298147 = CARTESIAN_POINT('',(151.448079,-63.569508,1.545)); +#298148 = LINE('',#298149,#298150); +#298149 = CARTESIAN_POINT('',(151.448079,-62.630491,1.545)); +#298150 = VECTOR('',#298151,1.); +#298151 = DIRECTION('',(0.,-1.,0.)); +#298152 = ORIENTED_EDGE('',*,*,#298153,.F.); +#298153 = EDGE_CURVE('',#298154,#298146,#298156,.T.); +#298154 = VERTEX_POINT('',#298155); +#298155 = CARTESIAN_POINT('',(151.448079,-63.569508,1.51)); +#298156 = LINE('',#298157,#298158); +#298157 = CARTESIAN_POINT('',(151.448079,-63.569508,1.51)); +#298158 = VECTOR('',#298159,1.); +#298159 = DIRECTION('',(0.,0.,1.)); +#298160 = ORIENTED_EDGE('',*,*,#298161,.F.); +#298161 = EDGE_CURVE('',#298122,#298154,#298162,.T.); +#298162 = LINE('',#298163,#298164); +#298163 = CARTESIAN_POINT('',(151.448079,-62.630491,1.51)); +#298164 = VECTOR('',#298165,1.); +#298165 = DIRECTION('',(0.,-1.,0.)); +#298166 = PLANE('',#298167); +#298167 = AXIS2_PLACEMENT_3D('',#298168,#298169,#298170); +#298168 = CARTESIAN_POINT('',(151.448079,-62.630491,1.51)); +#298169 = DIRECTION('',(1.,0.,-0.)); +#298170 = DIRECTION('',(0.,-1.,0.)); +#298171 = ADVANCED_FACE('',(#298172),#298197,.T.); +#298172 = FACE_BOUND('',#298173,.T.); +#298173 = EDGE_LOOP('',(#298174,#298175,#298183,#298191)); +#298174 = ORIENTED_EDGE('',*,*,#298153,.T.); +#298175 = ORIENTED_EDGE('',*,*,#298176,.T.); +#298176 = EDGE_CURVE('',#298146,#298177,#298179,.T.); +#298177 = VERTEX_POINT('',#298178); +#298178 = CARTESIAN_POINT('',(151.433147,-63.605557,1.545)); +#298179 = LINE('',#298180,#298181); +#298180 = CARTESIAN_POINT('',(151.448079,-63.569508,1.545)); +#298181 = VECTOR('',#298182,1.); +#298182 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#298183 = ORIENTED_EDGE('',*,*,#298184,.F.); +#298184 = EDGE_CURVE('',#298185,#298177,#298187,.T.); +#298185 = VERTEX_POINT('',#298186); +#298186 = CARTESIAN_POINT('',(151.433147,-63.605557,1.51)); +#298187 = LINE('',#298188,#298189); +#298188 = CARTESIAN_POINT('',(151.433147,-63.605557,1.51)); +#298189 = VECTOR('',#298190,1.); +#298190 = DIRECTION('',(0.,0.,1.)); +#298191 = ORIENTED_EDGE('',*,*,#298192,.F.); +#298192 = EDGE_CURVE('',#298154,#298185,#298193,.T.); +#298193 = LINE('',#298194,#298195); +#298194 = CARTESIAN_POINT('',(151.448079,-63.569508,1.51)); +#298195 = VECTOR('',#298196,1.); +#298196 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#298197 = PLANE('',#298198); +#298198 = AXIS2_PLACEMENT_3D('',#298199,#298200,#298201); +#298199 = CARTESIAN_POINT('',(151.448079,-63.569508,1.51)); +#298200 = DIRECTION('',(0.923879393968,-0.382683766838,0.)); +#298201 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#298202 = ADVANCED_FACE('',(#298203),#298228,.T.); +#298203 = FACE_BOUND('',#298204,.T.); +#298204 = EDGE_LOOP('',(#298205,#298206,#298214,#298222)); +#298205 = ORIENTED_EDGE('',*,*,#298184,.T.); +#298206 = ORIENTED_EDGE('',*,*,#298207,.T.); +#298207 = EDGE_CURVE('',#298177,#298208,#298210,.T.); +#298208 = VERTEX_POINT('',#298209); +#298209 = CARTESIAN_POINT('',(150.305556,-64.733147,1.545)); +#298210 = LINE('',#298211,#298212); +#298211 = CARTESIAN_POINT('',(151.433147,-63.605557,1.545)); +#298212 = VECTOR('',#298213,1.); +#298213 = DIRECTION('',(-0.707107094734,-0.707106467639,0.)); +#298214 = ORIENTED_EDGE('',*,*,#298215,.F.); +#298215 = EDGE_CURVE('',#298216,#298208,#298218,.T.); +#298216 = VERTEX_POINT('',#298217); +#298217 = CARTESIAN_POINT('',(150.305556,-64.733147,1.51)); +#298218 = LINE('',#298219,#298220); +#298219 = CARTESIAN_POINT('',(150.305556,-64.733147,1.51)); +#298220 = VECTOR('',#298221,1.); +#298221 = DIRECTION('',(0.,0.,1.)); +#298222 = ORIENTED_EDGE('',*,*,#298223,.F.); +#298223 = EDGE_CURVE('',#298185,#298216,#298224,.T.); +#298224 = LINE('',#298225,#298226); +#298225 = CARTESIAN_POINT('',(151.433147,-63.605557,1.51)); +#298226 = VECTOR('',#298227,1.); +#298227 = DIRECTION('',(-0.707107094734,-0.707106467639,0.)); +#298228 = PLANE('',#298229); +#298229 = AXIS2_PLACEMENT_3D('',#298230,#298231,#298232); +#298230 = CARTESIAN_POINT('',(151.433147,-63.605557,1.51)); +#298231 = DIRECTION('',(0.707106467639,-0.707107094734,0.)); +#298232 = DIRECTION('',(-0.707107094734,-0.707106467639,0.)); +#298233 = ADVANCED_FACE('',(#298234),#298259,.T.); +#298234 = FACE_BOUND('',#298235,.T.); +#298235 = EDGE_LOOP('',(#298236,#298237,#298245,#298253)); +#298236 = ORIENTED_EDGE('',*,*,#298215,.T.); +#298237 = ORIENTED_EDGE('',*,*,#298238,.T.); +#298238 = EDGE_CURVE('',#298208,#298239,#298241,.T.); +#298239 = VERTEX_POINT('',#298240); +#298240 = CARTESIAN_POINT('',(150.269508,-64.748079,1.545)); +#298241 = LINE('',#298242,#298243); +#298242 = CARTESIAN_POINT('',(150.305556,-64.733147,1.545)); +#298243 = VECTOR('',#298244,1.); +#298244 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#298245 = ORIENTED_EDGE('',*,*,#298246,.F.); +#298246 = EDGE_CURVE('',#298247,#298239,#298249,.T.); +#298247 = VERTEX_POINT('',#298248); +#298248 = CARTESIAN_POINT('',(150.269508,-64.748079,1.51)); +#298249 = LINE('',#298250,#298251); +#298250 = CARTESIAN_POINT('',(150.269508,-64.748079,1.51)); +#298251 = VECTOR('',#298252,1.); +#298252 = DIRECTION('',(0.,0.,1.)); +#298253 = ORIENTED_EDGE('',*,*,#298254,.F.); +#298254 = EDGE_CURVE('',#298216,#298247,#298255,.T.); +#298255 = LINE('',#298256,#298257); +#298256 = CARTESIAN_POINT('',(150.305556,-64.733147,1.51)); +#298257 = VECTOR('',#298258,1.); +#298258 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#298259 = PLANE('',#298260); +#298260 = AXIS2_PLACEMENT_3D('',#298261,#298262,#298263); +#298261 = CARTESIAN_POINT('',(150.305556,-64.733147,1.51)); +#298262 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#298263 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#298264 = ADVANCED_FACE('',(#298265),#298290,.T.); +#298265 = FACE_BOUND('',#298266,.T.); +#298266 = EDGE_LOOP('',(#298267,#298268,#298276,#298284)); +#298267 = ORIENTED_EDGE('',*,*,#298246,.T.); +#298268 = ORIENTED_EDGE('',*,*,#298269,.T.); +#298269 = EDGE_CURVE('',#298239,#298270,#298272,.T.); +#298270 = VERTEX_POINT('',#298271); +#298271 = CARTESIAN_POINT('',(145.741422,-64.75,1.545)); +#298272 = LINE('',#298273,#298274); +#298273 = CARTESIAN_POINT('',(150.269508,-64.748079,1.545)); +#298274 = VECTOR('',#298275,1.); +#298275 = DIRECTION('',(-0.99999991001,-4.242410208474E-04,0.)); +#298276 = ORIENTED_EDGE('',*,*,#298277,.F.); +#298277 = EDGE_CURVE('',#298278,#298270,#298280,.T.); +#298278 = VERTEX_POINT('',#298279); +#298279 = CARTESIAN_POINT('',(145.741422,-64.75,1.51)); +#298280 = LINE('',#298281,#298282); +#298281 = CARTESIAN_POINT('',(145.741422,-64.75,1.51)); +#298282 = VECTOR('',#298283,1.); +#298283 = DIRECTION('',(0.,0.,1.)); +#298284 = ORIENTED_EDGE('',*,*,#298285,.F.); +#298285 = EDGE_CURVE('',#298247,#298278,#298286,.T.); +#298286 = LINE('',#298287,#298288); +#298287 = CARTESIAN_POINT('',(150.269508,-64.748079,1.51)); +#298288 = VECTOR('',#298289,1.); +#298289 = DIRECTION('',(-0.99999991001,-4.242410208474E-04,0.)); +#298290 = PLANE('',#298291); +#298291 = AXIS2_PLACEMENT_3D('',#298292,#298293,#298294); +#298292 = CARTESIAN_POINT('',(150.269508,-64.748079,1.51)); +#298293 = DIRECTION('',(4.242410208474E-04,-0.99999991001,0.)); +#298294 = DIRECTION('',(-0.99999991001,-4.242410208474E-04,0.)); +#298295 = ADVANCED_FACE('',(#298296),#298321,.T.); +#298296 = FACE_BOUND('',#298297,.T.); +#298297 = EDGE_LOOP('',(#298298,#298299,#298307,#298315)); +#298298 = ORIENTED_EDGE('',*,*,#298277,.T.); +#298299 = ORIENTED_EDGE('',*,*,#298300,.T.); +#298300 = EDGE_CURVE('',#298270,#298301,#298303,.T.); +#298301 = VERTEX_POINT('',#298302); +#298302 = CARTESIAN_POINT('',(145.5195,-64.971921,1.545)); +#298303 = LINE('',#298304,#298305); +#298304 = CARTESIAN_POINT('',(145.741422,-64.75,1.545)); +#298305 = VECTOR('',#298306,1.); +#298306 = DIRECTION('',(-0.707108374331,-0.707105188039,0.)); +#298307 = ORIENTED_EDGE('',*,*,#298308,.F.); +#298308 = EDGE_CURVE('',#298309,#298301,#298311,.T.); +#298309 = VERTEX_POINT('',#298310); +#298310 = CARTESIAN_POINT('',(145.5195,-64.971921,1.51)); +#298311 = LINE('',#298312,#298313); +#298312 = CARTESIAN_POINT('',(145.5195,-64.971921,1.51)); +#298313 = VECTOR('',#298314,1.); +#298314 = DIRECTION('',(0.,0.,1.)); +#298315 = ORIENTED_EDGE('',*,*,#298316,.F.); +#298316 = EDGE_CURVE('',#298278,#298309,#298317,.T.); +#298317 = LINE('',#298318,#298319); +#298318 = CARTESIAN_POINT('',(145.741422,-64.75,1.51)); +#298319 = VECTOR('',#298320,1.); +#298320 = DIRECTION('',(-0.707108374331,-0.707105188039,0.)); +#298321 = PLANE('',#298322); +#298322 = AXIS2_PLACEMENT_3D('',#298323,#298324,#298325); +#298323 = CARTESIAN_POINT('',(145.741422,-64.75,1.51)); +#298324 = DIRECTION('',(0.707105188039,-0.707108374331,0.)); +#298325 = DIRECTION('',(-0.707108374331,-0.707105188039,0.)); +#298326 = ADVANCED_FACE('',(#298327),#298352,.T.); +#298327 = FACE_BOUND('',#298328,.T.); +#298328 = EDGE_LOOP('',(#298329,#298330,#298338,#298346)); +#298329 = ORIENTED_EDGE('',*,*,#298308,.T.); +#298330 = ORIENTED_EDGE('',*,*,#298331,.T.); +#298331 = EDGE_CURVE('',#298301,#298332,#298334,.T.); +#298332 = VERTEX_POINT('',#298333); +#298333 = CARTESIAN_POINT('',(145.527164,-64.985195,1.545)); +#298334 = LINE('',#298335,#298336); +#298335 = CARTESIAN_POINT('',(145.5195,-64.971921,1.545)); +#298336 = VECTOR('',#298337,1.); +#298337 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#298338 = ORIENTED_EDGE('',*,*,#298339,.F.); +#298339 = EDGE_CURVE('',#298340,#298332,#298342,.T.); +#298340 = VERTEX_POINT('',#298341); +#298341 = CARTESIAN_POINT('',(145.527164,-64.985195,1.51)); +#298342 = LINE('',#298343,#298344); +#298343 = CARTESIAN_POINT('',(145.527164,-64.985195,1.51)); +#298344 = VECTOR('',#298345,1.); +#298345 = DIRECTION('',(0.,0.,1.)); +#298346 = ORIENTED_EDGE('',*,*,#298347,.F.); +#298347 = EDGE_CURVE('',#298309,#298340,#298348,.T.); +#298348 = LINE('',#298349,#298350); +#298349 = CARTESIAN_POINT('',(145.5195,-64.971921,1.51)); +#298350 = VECTOR('',#298351,1.); +#298351 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#298352 = PLANE('',#298353); +#298353 = AXIS2_PLACEMENT_3D('',#298354,#298355,#298356); +#298354 = CARTESIAN_POINT('',(145.5195,-64.971921,1.51)); +#298355 = DIRECTION('',(0.866018269693,0.500012356405,-0.)); +#298356 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#298357 = ADVANCED_FACE('',(#298358),#298385,.T.); +#298358 = FACE_BOUND('',#298359,.T.); +#298359 = EDGE_LOOP('',(#298360,#298361,#298370,#298378)); +#298360 = ORIENTED_EDGE('',*,*,#298339,.T.); +#298361 = ORIENTED_EDGE('',*,*,#298362,.T.); +#298362 = EDGE_CURVE('',#298332,#298363,#298365,.T.); +#298363 = VERTEX_POINT('',#298364); +#298364 = CARTESIAN_POINT('',(145.364805,-64.822836,1.545)); +#298365 = CIRCLE('',#298366,0.299999934501); +#298366 = AXIS2_PLACEMENT_3D('',#298367,#298368,#298369); +#298367 = CARTESIAN_POINT('',(145.25000014059,-65.0999998594,1.545)); +#298368 = DIRECTION('',(0.,0.,-1.)); +#298369 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#298370 = ORIENTED_EDGE('',*,*,#298371,.F.); +#298371 = EDGE_CURVE('',#298372,#298363,#298374,.T.); +#298372 = VERTEX_POINT('',#298373); +#298373 = CARTESIAN_POINT('',(145.364805,-64.822836,1.51)); +#298374 = LINE('',#298375,#298376); +#298375 = CARTESIAN_POINT('',(145.364805,-64.822836,1.51)); +#298376 = VECTOR('',#298377,1.); +#298377 = DIRECTION('',(0.,0.,1.)); +#298378 = ORIENTED_EDGE('',*,*,#298379,.F.); +#298379 = EDGE_CURVE('',#298340,#298372,#298380,.T.); +#298380 = CIRCLE('',#298381,0.299999934501); +#298381 = AXIS2_PLACEMENT_3D('',#298382,#298383,#298384); +#298382 = CARTESIAN_POINT('',(145.25000014059,-65.0999998594,1.51)); +#298383 = DIRECTION('',(0.,0.,-1.)); +#298384 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#298385 = CYLINDRICAL_SURFACE('',#298386,0.299999934501); +#298386 = AXIS2_PLACEMENT_3D('',#298387,#298388,#298389); +#298387 = CARTESIAN_POINT('',(145.25000014059,-65.0999998594,1.51)); +#298388 = DIRECTION('',(0.,0.,-1.)); +#298389 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#298390 = ADVANCED_FACE('',(#298391),#298416,.T.); +#298391 = FACE_BOUND('',#298392,.T.); +#298392 = EDGE_LOOP('',(#298393,#298394,#298402,#298410)); +#298393 = ORIENTED_EDGE('',*,*,#298371,.T.); +#298394 = ORIENTED_EDGE('',*,*,#298395,.T.); +#298395 = EDGE_CURVE('',#298363,#298396,#298398,.T.); +#298396 = VERTEX_POINT('',#298397); +#298397 = CARTESIAN_POINT('',(145.378078,-64.830499,1.545)); +#298398 = LINE('',#298399,#298400); +#298399 = CARTESIAN_POINT('',(145.364805,-64.822836,1.545)); +#298400 = VECTOR('',#298401,1.); +#298401 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#298402 = ORIENTED_EDGE('',*,*,#298403,.F.); +#298403 = EDGE_CURVE('',#298404,#298396,#298406,.T.); +#298404 = VERTEX_POINT('',#298405); +#298405 = CARTESIAN_POINT('',(145.378078,-64.830499,1.51)); +#298406 = LINE('',#298407,#298408); +#298407 = CARTESIAN_POINT('',(145.378078,-64.830499,1.51)); +#298408 = VECTOR('',#298409,1.); +#298409 = DIRECTION('',(0.,0.,1.)); +#298410 = ORIENTED_EDGE('',*,*,#298411,.F.); +#298411 = EDGE_CURVE('',#298372,#298404,#298412,.T.); +#298412 = LINE('',#298413,#298414); +#298413 = CARTESIAN_POINT('',(145.364805,-64.822836,1.51)); +#298414 = VECTOR('',#298415,1.); +#298415 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#298416 = PLANE('',#298417); +#298417 = AXIS2_PLACEMENT_3D('',#298418,#298419,#298420); +#298418 = CARTESIAN_POINT('',(145.364805,-64.822836,1.51)); +#298419 = DIRECTION('',(0.499991674903,0.866030210228,-0.)); +#298420 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#298421 = ADVANCED_FACE('',(#298422),#298447,.T.); +#298422 = FACE_BOUND('',#298423,.T.); +#298423 = EDGE_LOOP('',(#298424,#298425,#298433,#298441)); +#298424 = ORIENTED_EDGE('',*,*,#298403,.T.); +#298425 = ORIENTED_EDGE('',*,*,#298426,.T.); +#298426 = EDGE_CURVE('',#298396,#298427,#298429,.T.); +#298427 = VERTEX_POINT('',#298428); +#298428 = CARTESIAN_POINT('',(145.644443,-64.566853,1.545)); +#298429 = LINE('',#298430,#298431); +#298430 = CARTESIAN_POINT('',(145.378078,-64.830499,1.545)); +#298431 = VECTOR('',#298432,1.); +#298432 = DIRECTION('',(0.710724944825,0.70347000846,0.)); +#298433 = ORIENTED_EDGE('',*,*,#298434,.F.); +#298434 = EDGE_CURVE('',#298435,#298427,#298437,.T.); +#298435 = VERTEX_POINT('',#298436); +#298436 = CARTESIAN_POINT('',(145.644443,-64.566853,1.51)); +#298437 = LINE('',#298438,#298439); +#298438 = CARTESIAN_POINT('',(145.644443,-64.566853,1.51)); +#298439 = VECTOR('',#298440,1.); +#298440 = DIRECTION('',(0.,0.,1.)); +#298441 = ORIENTED_EDGE('',*,*,#298442,.F.); +#298442 = EDGE_CURVE('',#298404,#298435,#298443,.T.); +#298443 = LINE('',#298444,#298445); +#298444 = CARTESIAN_POINT('',(145.378078,-64.830499,1.51)); +#298445 = VECTOR('',#298446,1.); +#298446 = DIRECTION('',(0.710724944825,0.70347000846,0.)); +#298447 = PLANE('',#298448); +#298448 = AXIS2_PLACEMENT_3D('',#298449,#298450,#298451); +#298449 = CARTESIAN_POINT('',(145.378078,-64.830499,1.51)); +#298450 = DIRECTION('',(-0.70347000846,0.710724944825,0.)); +#298451 = DIRECTION('',(0.710724944825,0.70347000846,0.)); +#298452 = ADVANCED_FACE('',(#298453),#298478,.T.); +#298453 = FACE_BOUND('',#298454,.T.); +#298454 = EDGE_LOOP('',(#298455,#298456,#298464,#298472)); +#298455 = ORIENTED_EDGE('',*,*,#298434,.T.); +#298456 = ORIENTED_EDGE('',*,*,#298457,.T.); +#298457 = EDGE_CURVE('',#298427,#298458,#298460,.T.); +#298458 = VERTEX_POINT('',#298459); +#298459 = CARTESIAN_POINT('',(145.680491,-64.551921,1.545)); +#298460 = LINE('',#298461,#298462); +#298461 = CARTESIAN_POINT('',(145.644443,-64.566853,1.545)); +#298462 = VECTOR('',#298463,1.); +#298463 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#298464 = ORIENTED_EDGE('',*,*,#298465,.F.); +#298465 = EDGE_CURVE('',#298466,#298458,#298468,.T.); +#298466 = VERTEX_POINT('',#298467); +#298467 = CARTESIAN_POINT('',(145.680491,-64.551921,1.51)); +#298468 = LINE('',#298469,#298470); +#298469 = CARTESIAN_POINT('',(145.680491,-64.551921,1.51)); +#298470 = VECTOR('',#298471,1.); +#298471 = DIRECTION('',(0.,0.,1.)); +#298472 = ORIENTED_EDGE('',*,*,#298473,.F.); +#298473 = EDGE_CURVE('',#298435,#298466,#298474,.T.); +#298474 = LINE('',#298475,#298476); +#298475 = CARTESIAN_POINT('',(145.644443,-64.566853,1.51)); +#298476 = VECTOR('',#298477,1.); +#298477 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#298478 = PLANE('',#298479); +#298479 = AXIS2_PLACEMENT_3D('',#298480,#298481,#298482); +#298480 = CARTESIAN_POINT('',(145.644443,-64.566853,1.51)); +#298481 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#298482 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#298483 = ADVANCED_FACE('',(#298484),#298509,.T.); +#298484 = FACE_BOUND('',#298485,.T.); +#298485 = EDGE_LOOP('',(#298486,#298487,#298495,#298503)); +#298486 = ORIENTED_EDGE('',*,*,#298465,.T.); +#298487 = ORIENTED_EDGE('',*,*,#298488,.T.); +#298488 = EDGE_CURVE('',#298458,#298489,#298491,.T.); +#298489 = VERTEX_POINT('',#298490); +#298490 = CARTESIAN_POINT('',(150.208577,-64.55,1.545)); +#298491 = LINE('',#298492,#298493); +#298492 = CARTESIAN_POINT('',(145.680491,-64.551921,1.545)); +#298493 = VECTOR('',#298494,1.); +#298494 = DIRECTION('',(0.99999991001,4.242410208474E-04,0.)); +#298495 = ORIENTED_EDGE('',*,*,#298496,.F.); +#298496 = EDGE_CURVE('',#298497,#298489,#298499,.T.); +#298497 = VERTEX_POINT('',#298498); +#298498 = CARTESIAN_POINT('',(150.208577,-64.55,1.51)); +#298499 = LINE('',#298500,#298501); +#298500 = CARTESIAN_POINT('',(150.208577,-64.55,1.51)); +#298501 = VECTOR('',#298502,1.); +#298502 = DIRECTION('',(0.,0.,1.)); +#298503 = ORIENTED_EDGE('',*,*,#298504,.F.); +#298504 = EDGE_CURVE('',#298466,#298497,#298505,.T.); +#298505 = LINE('',#298506,#298507); +#298506 = CARTESIAN_POINT('',(145.680491,-64.551921,1.51)); +#298507 = VECTOR('',#298508,1.); +#298508 = DIRECTION('',(0.99999991001,4.242410208474E-04,0.)); +#298509 = PLANE('',#298510); +#298510 = AXIS2_PLACEMENT_3D('',#298511,#298512,#298513); +#298511 = CARTESIAN_POINT('',(145.680491,-64.551921,1.51)); +#298512 = DIRECTION('',(-4.242410208474E-04,0.99999991001,0.)); +#298513 = DIRECTION('',(0.99999991001,4.242410208474E-04,0.)); +#298514 = ADVANCED_FACE('',(#298515),#298540,.T.); +#298515 = FACE_BOUND('',#298516,.T.); +#298516 = EDGE_LOOP('',(#298517,#298518,#298526,#298534)); +#298517 = ORIENTED_EDGE('',*,*,#298496,.T.); +#298518 = ORIENTED_EDGE('',*,*,#298519,.T.); +#298519 = EDGE_CURVE('',#298489,#298520,#298522,.T.); +#298520 = VERTEX_POINT('',#298521); +#298521 = CARTESIAN_POINT('',(151.25,-63.508577,1.545)); +#298522 = LINE('',#298523,#298524); +#298523 = CARTESIAN_POINT('',(150.208577,-64.55,1.545)); +#298524 = VECTOR('',#298525,1.); +#298525 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#298526 = ORIENTED_EDGE('',*,*,#298527,.F.); +#298527 = EDGE_CURVE('',#298528,#298520,#298530,.T.); +#298528 = VERTEX_POINT('',#298529); +#298529 = CARTESIAN_POINT('',(151.25,-63.508577,1.51)); +#298530 = LINE('',#298531,#298532); +#298531 = CARTESIAN_POINT('',(151.25,-63.508577,1.51)); +#298532 = VECTOR('',#298533,1.); +#298533 = DIRECTION('',(0.,0.,1.)); +#298534 = ORIENTED_EDGE('',*,*,#298535,.F.); +#298535 = EDGE_CURVE('',#298497,#298528,#298536,.T.); +#298536 = LINE('',#298537,#298538); +#298537 = CARTESIAN_POINT('',(150.208577,-64.55,1.51)); +#298538 = VECTOR('',#298539,1.); +#298539 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#298540 = PLANE('',#298541); +#298541 = AXIS2_PLACEMENT_3D('',#298542,#298543,#298544); +#298542 = CARTESIAN_POINT('',(150.208577,-64.55,1.51)); +#298543 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#298544 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#298545 = ADVANCED_FACE('',(#298546),#298571,.T.); +#298546 = FACE_BOUND('',#298547,.T.); +#298547 = EDGE_LOOP('',(#298548,#298549,#298557,#298565)); +#298548 = ORIENTED_EDGE('',*,*,#298527,.T.); +#298549 = ORIENTED_EDGE('',*,*,#298550,.T.); +#298550 = EDGE_CURVE('',#298520,#298551,#298553,.T.); +#298551 = VERTEX_POINT('',#298552); +#298552 = CARTESIAN_POINT('',(151.251921,-62.630491,1.545)); +#298553 = LINE('',#298554,#298555); +#298554 = CARTESIAN_POINT('',(151.25,-63.508577,1.545)); +#298555 = VECTOR('',#298556,1.); +#298556 = DIRECTION('',(2.187707585578E-03,0.999997606965,0.)); +#298557 = ORIENTED_EDGE('',*,*,#298558,.F.); +#298558 = EDGE_CURVE('',#298559,#298551,#298561,.T.); +#298559 = VERTEX_POINT('',#298560); +#298560 = CARTESIAN_POINT('',(151.251921,-62.630491,1.51)); +#298561 = LINE('',#298562,#298563); +#298562 = CARTESIAN_POINT('',(151.251921,-62.630491,1.51)); +#298563 = VECTOR('',#298564,1.); +#298564 = DIRECTION('',(0.,0.,1.)); +#298565 = ORIENTED_EDGE('',*,*,#298566,.F.); +#298566 = EDGE_CURVE('',#298528,#298559,#298567,.T.); +#298567 = LINE('',#298568,#298569); +#298568 = CARTESIAN_POINT('',(151.25,-63.508577,1.51)); +#298569 = VECTOR('',#298570,1.); +#298570 = DIRECTION('',(2.187707585578E-03,0.999997606965,0.)); +#298571 = PLANE('',#298572); +#298572 = AXIS2_PLACEMENT_3D('',#298573,#298574,#298575); +#298573 = CARTESIAN_POINT('',(151.25,-63.508577,1.51)); +#298574 = DIRECTION('',(-0.999997606965,2.187707585578E-03,0.)); +#298575 = DIRECTION('',(2.187707585578E-03,0.999997606965,0.)); +#298576 = ADVANCED_FACE('',(#298577),#298602,.T.); +#298577 = FACE_BOUND('',#298578,.T.); +#298578 = EDGE_LOOP('',(#298579,#298580,#298588,#298596)); +#298579 = ORIENTED_EDGE('',*,*,#298558,.T.); +#298580 = ORIENTED_EDGE('',*,*,#298581,.T.); +#298581 = EDGE_CURVE('',#298551,#298582,#298584,.T.); +#298582 = VERTEX_POINT('',#298583); +#298583 = CARTESIAN_POINT('',(151.266853,-62.594443,1.545)); +#298584 = LINE('',#298585,#298586); +#298585 = CARTESIAN_POINT('',(151.251921,-62.630491,1.545)); +#298586 = VECTOR('',#298587,1.); +#298587 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#298588 = ORIENTED_EDGE('',*,*,#298589,.F.); +#298589 = EDGE_CURVE('',#298590,#298582,#298592,.T.); +#298590 = VERTEX_POINT('',#298591); +#298591 = CARTESIAN_POINT('',(151.266853,-62.594443,1.51)); +#298592 = LINE('',#298593,#298594); +#298593 = CARTESIAN_POINT('',(151.266853,-62.594443,1.51)); +#298594 = VECTOR('',#298595,1.); +#298595 = DIRECTION('',(0.,0.,1.)); +#298596 = ORIENTED_EDGE('',*,*,#298597,.F.); +#298597 = EDGE_CURVE('',#298559,#298590,#298598,.T.); +#298598 = LINE('',#298599,#298600); +#298599 = CARTESIAN_POINT('',(151.251921,-62.630491,1.51)); +#298600 = VECTOR('',#298601,1.); +#298601 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#298602 = PLANE('',#298603); +#298603 = AXIS2_PLACEMENT_3D('',#298604,#298605,#298606); +#298604 = CARTESIAN_POINT('',(151.251921,-62.630491,1.51)); +#298605 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#298606 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#298607 = ADVANCED_FACE('',(#298608),#298624,.T.); +#298608 = FACE_BOUND('',#298609,.T.); +#298609 = EDGE_LOOP('',(#298610,#298611,#298617,#298618)); +#298610 = ORIENTED_EDGE('',*,*,#298589,.T.); +#298611 = ORIENTED_EDGE('',*,*,#298612,.T.); +#298612 = EDGE_CURVE('',#298582,#298105,#298613,.T.); +#298613 = LINE('',#298614,#298615); +#298614 = CARTESIAN_POINT('',(151.266853,-62.594443,1.545)); +#298615 = VECTOR('',#298616,1.); +#298616 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#298617 = ORIENTED_EDGE('',*,*,#298102,.F.); +#298618 = ORIENTED_EDGE('',*,*,#298619,.F.); +#298619 = EDGE_CURVE('',#298590,#298103,#298620,.T.); +#298620 = LINE('',#298621,#298622); +#298621 = CARTESIAN_POINT('',(151.266853,-62.594443,1.51)); +#298622 = VECTOR('',#298623,1.); +#298623 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#298624 = PLANE('',#298625); +#298625 = AXIS2_PLACEMENT_3D('',#298626,#298627,#298628); +#298626 = CARTESIAN_POINT('',(151.266853,-62.594443,1.51)); +#298627 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#298628 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#298629 = ADVANCED_FACE('',(#298630),#298657,.F.); +#298630 = FACE_BOUND('',#298631,.T.); +#298631 = EDGE_LOOP('',(#298632,#298642,#298649,#298650)); +#298632 = ORIENTED_EDGE('',*,*,#298633,.T.); +#298633 = EDGE_CURVE('',#298634,#298636,#298638,.T.); +#298634 = VERTEX_POINT('',#298635); +#298635 = CARTESIAN_POINT('',(145.387255,-65.1,1.51)); +#298636 = VERTEX_POINT('',#298637); +#298637 = CARTESIAN_POINT('',(145.387255,-65.1,1.545)); +#298638 = LINE('',#298639,#298640); +#298639 = CARTESIAN_POINT('',(145.387255,-65.1,1.51)); +#298640 = VECTOR('',#298641,1.); +#298641 = DIRECTION('',(0.,0.,1.)); +#298642 = ORIENTED_EDGE('',*,*,#298643,.T.); +#298643 = EDGE_CURVE('',#298636,#298636,#298644,.T.); +#298644 = CIRCLE('',#298645,0.137255); +#298645 = AXIS2_PLACEMENT_3D('',#298646,#298647,#298648); +#298646 = CARTESIAN_POINT('',(145.25,-65.1,1.545)); +#298647 = DIRECTION('',(0.,0.,1.)); +#298648 = DIRECTION('',(1.,0.,-0.)); +#298649 = ORIENTED_EDGE('',*,*,#298633,.F.); +#298650 = ORIENTED_EDGE('',*,*,#298651,.F.); +#298651 = EDGE_CURVE('',#298634,#298634,#298652,.T.); +#298652 = CIRCLE('',#298653,0.137255); +#298653 = AXIS2_PLACEMENT_3D('',#298654,#298655,#298656); +#298654 = CARTESIAN_POINT('',(145.25,-65.1,1.51)); +#298655 = DIRECTION('',(0.,0.,1.)); +#298656 = DIRECTION('',(1.,0.,-0.)); +#298657 = CYLINDRICAL_SURFACE('',#298658,0.137255); +#298658 = AXIS2_PLACEMENT_3D('',#298659,#298660,#298661); +#298659 = CARTESIAN_POINT('',(145.25,-65.1,1.51)); +#298660 = DIRECTION('',(-0.,-0.,-1.)); +#298661 = DIRECTION('',(1.,0.,-0.)); +#298662 = ADVANCED_FACE('',(#298663,#298682),#298685,.F.); +#298663 = FACE_BOUND('',#298664,.T.); +#298664 = EDGE_LOOP('',(#298665,#298666,#298667,#298668,#298669,#298670, + #298671,#298672,#298673,#298674,#298675,#298676,#298677,#298678, + #298679,#298680,#298681)); +#298665 = ORIENTED_EDGE('',*,*,#298129,.T.); +#298666 = ORIENTED_EDGE('',*,*,#298161,.T.); +#298667 = ORIENTED_EDGE('',*,*,#298192,.T.); +#298668 = ORIENTED_EDGE('',*,*,#298223,.T.); +#298669 = ORIENTED_EDGE('',*,*,#298254,.T.); +#298670 = ORIENTED_EDGE('',*,*,#298285,.T.); +#298671 = ORIENTED_EDGE('',*,*,#298316,.T.); +#298672 = ORIENTED_EDGE('',*,*,#298347,.T.); +#298673 = ORIENTED_EDGE('',*,*,#298379,.T.); +#298674 = ORIENTED_EDGE('',*,*,#298411,.T.); +#298675 = ORIENTED_EDGE('',*,*,#298442,.T.); +#298676 = ORIENTED_EDGE('',*,*,#298473,.T.); +#298677 = ORIENTED_EDGE('',*,*,#298504,.T.); +#298678 = ORIENTED_EDGE('',*,*,#298535,.T.); +#298679 = ORIENTED_EDGE('',*,*,#298566,.T.); +#298680 = ORIENTED_EDGE('',*,*,#298597,.T.); +#298681 = ORIENTED_EDGE('',*,*,#298619,.T.); +#298682 = FACE_BOUND('',#298683,.T.); +#298683 = EDGE_LOOP('',(#298684)); +#298684 = ORIENTED_EDGE('',*,*,#298651,.T.); +#298685 = PLANE('',#298686); +#298686 = AXIS2_PLACEMENT_3D('',#298687,#298688,#298689); +#298687 = CARTESIAN_POINT('',(0.,0.,1.51)); +#298688 = DIRECTION('',(0.,0.,1.)); +#298689 = DIRECTION('',(1.,0.,-0.)); +#298690 = ADVANCED_FACE('',(#298691,#298710),#298713,.T.); +#298691 = FACE_BOUND('',#298692,.F.); +#298692 = EDGE_LOOP('',(#298693,#298694,#298695,#298696,#298697,#298698, + #298699,#298700,#298701,#298702,#298703,#298704,#298705,#298706, + #298707,#298708,#298709)); +#298693 = ORIENTED_EDGE('',*,*,#298112,.T.); +#298694 = ORIENTED_EDGE('',*,*,#298145,.T.); +#298695 = ORIENTED_EDGE('',*,*,#298176,.T.); +#298696 = ORIENTED_EDGE('',*,*,#298207,.T.); +#298697 = ORIENTED_EDGE('',*,*,#298238,.T.); +#298698 = ORIENTED_EDGE('',*,*,#298269,.T.); +#298699 = ORIENTED_EDGE('',*,*,#298300,.T.); +#298700 = ORIENTED_EDGE('',*,*,#298331,.T.); +#298701 = ORIENTED_EDGE('',*,*,#298362,.T.); +#298702 = ORIENTED_EDGE('',*,*,#298395,.T.); +#298703 = ORIENTED_EDGE('',*,*,#298426,.T.); +#298704 = ORIENTED_EDGE('',*,*,#298457,.T.); +#298705 = ORIENTED_EDGE('',*,*,#298488,.T.); +#298706 = ORIENTED_EDGE('',*,*,#298519,.T.); +#298707 = ORIENTED_EDGE('',*,*,#298550,.T.); +#298708 = ORIENTED_EDGE('',*,*,#298581,.T.); +#298709 = ORIENTED_EDGE('',*,*,#298612,.T.); +#298710 = FACE_BOUND('',#298711,.F.); +#298711 = EDGE_LOOP('',(#298712)); +#298712 = ORIENTED_EDGE('',*,*,#298643,.T.); +#298713 = PLANE('',#298714); +#298714 = AXIS2_PLACEMENT_3D('',#298715,#298716,#298717); +#298715 = CARTESIAN_POINT('',(0.,0.,1.545)); +#298716 = DIRECTION('',(0.,0.,1.)); +#298717 = DIRECTION('',(1.,0.,-0.)); +#298718 = MANIFOLD_SOLID_BREP('',#298719); +#298719 = CLOSED_SHELL('',(#298720,#298760,#298791,#298822,#298853, + #298884,#298917,#298948,#298979,#299010,#299041,#299072,#299103, + #299134,#299167,#299189,#299222,#299248)); +#298720 = ADVANCED_FACE('',(#298721),#298755,.T.); +#298721 = FACE_BOUND('',#298722,.T.); +#298722 = EDGE_LOOP('',(#298723,#298733,#298741,#298749)); +#298723 = ORIENTED_EDGE('',*,*,#298724,.T.); +#298724 = EDGE_CURVE('',#298725,#298727,#298729,.T.); +#298725 = VERTEX_POINT('',#298726); +#298726 = CARTESIAN_POINT('',(127.791421,-64.55,1.51)); +#298727 = VERTEX_POINT('',#298728); +#298728 = CARTESIAN_POINT('',(127.791421,-64.55,1.545)); +#298729 = LINE('',#298730,#298731); +#298730 = CARTESIAN_POINT('',(127.791421,-64.55,1.51)); +#298731 = VECTOR('',#298732,1.); +#298732 = DIRECTION('',(0.,0.,1.)); +#298733 = ORIENTED_EDGE('',*,*,#298734,.T.); +#298734 = EDGE_CURVE('',#298727,#298735,#298737,.T.); +#298735 = VERTEX_POINT('',#298736); +#298736 = CARTESIAN_POINT('',(129.869509,-64.551921,1.545)); +#298737 = LINE('',#298738,#298739); +#298738 = CARTESIAN_POINT('',(127.791421,-64.55,1.545)); +#298739 = VECTOR('',#298740,1.); +#298740 = DIRECTION('',(0.999999572736,-9.24407041098E-04,0.)); +#298741 = ORIENTED_EDGE('',*,*,#298742,.F.); +#298742 = EDGE_CURVE('',#298743,#298735,#298745,.T.); +#298743 = VERTEX_POINT('',#298744); +#298744 = CARTESIAN_POINT('',(129.869509,-64.551921,1.51)); +#298745 = LINE('',#298746,#298747); +#298746 = CARTESIAN_POINT('',(129.869509,-64.551921,1.51)); +#298747 = VECTOR('',#298748,1.); +#298748 = DIRECTION('',(0.,0.,1.)); +#298749 = ORIENTED_EDGE('',*,*,#298750,.F.); +#298750 = EDGE_CURVE('',#298725,#298743,#298751,.T.); +#298751 = LINE('',#298752,#298753); +#298752 = CARTESIAN_POINT('',(127.791421,-64.55,1.51)); +#298753 = VECTOR('',#298754,1.); +#298754 = DIRECTION('',(0.999999572736,-9.24407041098E-04,0.)); +#298755 = PLANE('',#298756); +#298756 = AXIS2_PLACEMENT_3D('',#298757,#298758,#298759); +#298757 = CARTESIAN_POINT('',(127.791421,-64.55,1.51)); +#298758 = DIRECTION('',(9.24407041098E-04,0.999999572736,-0.)); +#298759 = DIRECTION('',(0.999999572736,-9.24407041098E-04,0.)); +#298760 = ADVANCED_FACE('',(#298761),#298786,.T.); +#298761 = FACE_BOUND('',#298762,.T.); +#298762 = EDGE_LOOP('',(#298763,#298764,#298772,#298780)); +#298763 = ORIENTED_EDGE('',*,*,#298742,.T.); +#298764 = ORIENTED_EDGE('',*,*,#298765,.T.); +#298765 = EDGE_CURVE('',#298735,#298766,#298768,.T.); +#298766 = VERTEX_POINT('',#298767); +#298767 = CARTESIAN_POINT('',(129.905557,-64.566853,1.545)); +#298768 = LINE('',#298769,#298770); +#298769 = CARTESIAN_POINT('',(129.869509,-64.551921,1.545)); +#298770 = VECTOR('',#298771,1.); +#298771 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#298772 = ORIENTED_EDGE('',*,*,#298773,.F.); +#298773 = EDGE_CURVE('',#298774,#298766,#298776,.T.); +#298774 = VERTEX_POINT('',#298775); +#298775 = CARTESIAN_POINT('',(129.905557,-64.566853,1.51)); +#298776 = LINE('',#298777,#298778); +#298777 = CARTESIAN_POINT('',(129.905557,-64.566853,1.51)); +#298778 = VECTOR('',#298779,1.); +#298779 = DIRECTION('',(0.,0.,1.)); +#298780 = ORIENTED_EDGE('',*,*,#298781,.F.); +#298781 = EDGE_CURVE('',#298743,#298774,#298782,.T.); +#298782 = LINE('',#298783,#298784); +#298783 = CARTESIAN_POINT('',(129.869509,-64.551921,1.51)); +#298784 = VECTOR('',#298785,1.); +#298785 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#298786 = PLANE('',#298787); +#298787 = AXIS2_PLACEMENT_3D('',#298788,#298789,#298790); +#298788 = CARTESIAN_POINT('',(129.869509,-64.551921,1.51)); +#298789 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#298790 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#298791 = ADVANCED_FACE('',(#298792),#298817,.T.); +#298792 = FACE_BOUND('',#298793,.T.); +#298793 = EDGE_LOOP('',(#298794,#298795,#298803,#298811)); +#298794 = ORIENTED_EDGE('',*,*,#298773,.T.); +#298795 = ORIENTED_EDGE('',*,*,#298796,.T.); +#298796 = EDGE_CURVE('',#298766,#298797,#298799,.T.); +#298797 = VERTEX_POINT('',#298798); +#298798 = CARTESIAN_POINT('',(129.941422,-64.6,1.545)); +#298799 = LINE('',#298800,#298801); +#298800 = CARTESIAN_POINT('',(129.905557,-64.566853,1.545)); +#298801 = VECTOR('',#298802,1.); +#298802 = DIRECTION('',(0.734386450633,-0.678731567799,0.)); +#298803 = ORIENTED_EDGE('',*,*,#298804,.F.); +#298804 = EDGE_CURVE('',#298805,#298797,#298807,.T.); +#298805 = VERTEX_POINT('',#298806); +#298806 = CARTESIAN_POINT('',(129.941422,-64.6,1.51)); +#298807 = LINE('',#298808,#298809); +#298808 = CARTESIAN_POINT('',(129.941422,-64.6,1.51)); +#298809 = VECTOR('',#298810,1.); +#298810 = DIRECTION('',(0.,0.,1.)); +#298811 = ORIENTED_EDGE('',*,*,#298812,.F.); +#298812 = EDGE_CURVE('',#298774,#298805,#298813,.T.); +#298813 = LINE('',#298814,#298815); +#298814 = CARTESIAN_POINT('',(129.905557,-64.566853,1.51)); +#298815 = VECTOR('',#298816,1.); +#298816 = DIRECTION('',(0.734386450633,-0.678731567799,0.)); +#298817 = PLANE('',#298818); +#298818 = AXIS2_PLACEMENT_3D('',#298819,#298820,#298821); +#298819 = CARTESIAN_POINT('',(129.905557,-64.566853,1.51)); +#298820 = DIRECTION('',(0.678731567799,0.734386450633,-0.)); +#298821 = DIRECTION('',(0.734386450633,-0.678731567799,0.)); +#298822 = ADVANCED_FACE('',(#298823),#298848,.T.); +#298823 = FACE_BOUND('',#298824,.T.); +#298824 = EDGE_LOOP('',(#298825,#298826,#298834,#298842)); +#298825 = ORIENTED_EDGE('',*,*,#298804,.T.); +#298826 = ORIENTED_EDGE('',*,*,#298827,.T.); +#298827 = EDGE_CURVE('',#298797,#298828,#298830,.T.); +#298828 = VERTEX_POINT('',#298829); +#298829 = CARTESIAN_POINT('',(130.518869,-64.6,1.545)); +#298830 = LINE('',#298831,#298832); +#298831 = CARTESIAN_POINT('',(129.941422,-64.6,1.545)); +#298832 = VECTOR('',#298833,1.); +#298833 = DIRECTION('',(1.,0.,0.)); +#298834 = ORIENTED_EDGE('',*,*,#298835,.F.); +#298835 = EDGE_CURVE('',#298836,#298828,#298838,.T.); +#298836 = VERTEX_POINT('',#298837); +#298837 = CARTESIAN_POINT('',(130.518869,-64.6,1.51)); +#298838 = LINE('',#298839,#298840); +#298839 = CARTESIAN_POINT('',(130.518869,-64.6,1.51)); +#298840 = VECTOR('',#298841,1.); +#298841 = DIRECTION('',(0.,0.,1.)); +#298842 = ORIENTED_EDGE('',*,*,#298843,.F.); +#298843 = EDGE_CURVE('',#298805,#298836,#298844,.T.); +#298844 = LINE('',#298845,#298846); +#298845 = CARTESIAN_POINT('',(129.941422,-64.6,1.51)); +#298846 = VECTOR('',#298847,1.); +#298847 = DIRECTION('',(1.,0.,0.)); +#298848 = PLANE('',#298849); +#298849 = AXIS2_PLACEMENT_3D('',#298850,#298851,#298852); +#298850 = CARTESIAN_POINT('',(129.941422,-64.6,1.51)); +#298851 = DIRECTION('',(0.,1.,0.)); +#298852 = DIRECTION('',(1.,0.,0.)); +#298853 = ADVANCED_FACE('',(#298854),#298879,.T.); +#298854 = FACE_BOUND('',#298855,.T.); +#298855 = EDGE_LOOP('',(#298856,#298857,#298865,#298873)); +#298856 = ORIENTED_EDGE('',*,*,#298835,.T.); +#298857 = ORIENTED_EDGE('',*,*,#298858,.T.); +#298858 = EDGE_CURVE('',#298828,#298859,#298861,.T.); +#298859 = VERTEX_POINT('',#298860); +#298860 = CARTESIAN_POINT('',(130.522836,-64.585195,1.545)); +#298861 = LINE('',#298862,#298863); +#298862 = CARTESIAN_POINT('',(130.518869,-64.6,1.545)); +#298863 = VECTOR('',#298864,1.); +#298864 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#298865 = ORIENTED_EDGE('',*,*,#298866,.F.); +#298866 = EDGE_CURVE('',#298867,#298859,#298869,.T.); +#298867 = VERTEX_POINT('',#298868); +#298868 = CARTESIAN_POINT('',(130.522836,-64.585195,1.51)); +#298869 = LINE('',#298870,#298871); +#298870 = CARTESIAN_POINT('',(130.522836,-64.585195,1.51)); +#298871 = VECTOR('',#298872,1.); +#298872 = DIRECTION('',(0.,0.,1.)); +#298873 = ORIENTED_EDGE('',*,*,#298874,.F.); +#298874 = EDGE_CURVE('',#298836,#298867,#298875,.T.); +#298875 = LINE('',#298876,#298877); +#298876 = CARTESIAN_POINT('',(130.518869,-64.6,1.51)); +#298877 = VECTOR('',#298878,1.); +#298878 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#298879 = PLANE('',#298880); +#298880 = AXIS2_PLACEMENT_3D('',#298881,#298882,#298883); +#298881 = CARTESIAN_POINT('',(130.518869,-64.6,1.51)); +#298882 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#298883 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#298884 = ADVANCED_FACE('',(#298885),#298912,.T.); +#298885 = FACE_BOUND('',#298886,.T.); +#298886 = EDGE_LOOP('',(#298887,#298888,#298897,#298905)); +#298887 = ORIENTED_EDGE('',*,*,#298866,.T.); +#298888 = ORIENTED_EDGE('',*,*,#298889,.T.); +#298889 = EDGE_CURVE('',#298859,#298890,#298892,.T.); +#298890 = VERTEX_POINT('',#298891); +#298891 = CARTESIAN_POINT('',(130.522836,-64.814805,1.545)); +#298892 = CIRCLE('',#298893,0.299999850918); +#298893 = AXIS2_PLACEMENT_3D('',#298894,#298895,#298896); +#298894 = CARTESIAN_POINT('',(130.79999971069,-64.7,1.545)); +#298895 = DIRECTION('',(0.,0.,-1.)); +#298896 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#298897 = ORIENTED_EDGE('',*,*,#298898,.F.); +#298898 = EDGE_CURVE('',#298899,#298890,#298901,.T.); +#298899 = VERTEX_POINT('',#298900); +#298900 = CARTESIAN_POINT('',(130.522836,-64.814805,1.51)); +#298901 = LINE('',#298902,#298903); +#298902 = CARTESIAN_POINT('',(130.522836,-64.814805,1.51)); +#298903 = VECTOR('',#298904,1.); +#298904 = DIRECTION('',(0.,0.,1.)); +#298905 = ORIENTED_EDGE('',*,*,#298906,.F.); +#298906 = EDGE_CURVE('',#298867,#298899,#298907,.T.); +#298907 = CIRCLE('',#298908,0.299999850918); +#298908 = AXIS2_PLACEMENT_3D('',#298909,#298910,#298911); +#298909 = CARTESIAN_POINT('',(130.79999971069,-64.7,1.51)); +#298910 = DIRECTION('',(0.,0.,-1.)); +#298911 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#298912 = CYLINDRICAL_SURFACE('',#298913,0.299999850918); +#298913 = AXIS2_PLACEMENT_3D('',#298914,#298915,#298916); +#298914 = CARTESIAN_POINT('',(130.79999971069,-64.7,1.51)); +#298915 = DIRECTION('',(0.,0.,-1.)); +#298916 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#298917 = ADVANCED_FACE('',(#298918),#298943,.T.); +#298918 = FACE_BOUND('',#298919,.T.); +#298919 = EDGE_LOOP('',(#298920,#298921,#298929,#298937)); +#298920 = ORIENTED_EDGE('',*,*,#298898,.T.); +#298921 = ORIENTED_EDGE('',*,*,#298922,.T.); +#298922 = EDGE_CURVE('',#298890,#298923,#298925,.T.); +#298923 = VERTEX_POINT('',#298924); +#298924 = CARTESIAN_POINT('',(130.518869,-64.8,1.545)); +#298925 = LINE('',#298926,#298927); +#298926 = CARTESIAN_POINT('',(130.522836,-64.814805,1.545)); +#298927 = VECTOR('',#298928,1.); +#298928 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#298929 = ORIENTED_EDGE('',*,*,#298930,.F.); +#298930 = EDGE_CURVE('',#298931,#298923,#298933,.T.); +#298931 = VERTEX_POINT('',#298932); +#298932 = CARTESIAN_POINT('',(130.518869,-64.8,1.51)); +#298933 = LINE('',#298934,#298935); +#298934 = CARTESIAN_POINT('',(130.518869,-64.8,1.51)); +#298935 = VECTOR('',#298936,1.); +#298936 = DIRECTION('',(0.,0.,1.)); +#298937 = ORIENTED_EDGE('',*,*,#298938,.F.); +#298938 = EDGE_CURVE('',#298899,#298931,#298939,.T.); +#298939 = LINE('',#298940,#298941); +#298940 = CARTESIAN_POINT('',(130.522836,-64.814805,1.51)); +#298941 = VECTOR('',#298942,1.); +#298942 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#298943 = PLANE('',#298944); +#298944 = AXIS2_PLACEMENT_3D('',#298945,#298946,#298947); +#298945 = CARTESIAN_POINT('',(130.522836,-64.814805,1.51)); +#298946 = DIRECTION('',(-0.965925627198,-0.258819788119,0.)); +#298947 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#298948 = ADVANCED_FACE('',(#298949),#298974,.T.); +#298949 = FACE_BOUND('',#298950,.T.); +#298950 = EDGE_LOOP('',(#298951,#298952,#298960,#298968)); +#298951 = ORIENTED_EDGE('',*,*,#298930,.T.); +#298952 = ORIENTED_EDGE('',*,*,#298953,.T.); +#298953 = EDGE_CURVE('',#298923,#298954,#298956,.T.); +#298954 = VERTEX_POINT('',#298955); +#298955 = CARTESIAN_POINT('',(129.880491,-64.798079,1.545)); +#298956 = LINE('',#298957,#298958); +#298957 = CARTESIAN_POINT('',(130.518869,-64.8,1.545)); +#298958 = VECTOR('',#298959,1.); +#298959 = DIRECTION('',(-0.999995472422,3.009175288807E-03,0.)); +#298960 = ORIENTED_EDGE('',*,*,#298961,.F.); +#298961 = EDGE_CURVE('',#298962,#298954,#298964,.T.); +#298962 = VERTEX_POINT('',#298963); +#298963 = CARTESIAN_POINT('',(129.880491,-64.798079,1.51)); +#298964 = LINE('',#298965,#298966); +#298965 = CARTESIAN_POINT('',(129.880491,-64.798079,1.51)); +#298966 = VECTOR('',#298967,1.); +#298967 = DIRECTION('',(0.,0.,1.)); +#298968 = ORIENTED_EDGE('',*,*,#298969,.F.); +#298969 = EDGE_CURVE('',#298931,#298962,#298970,.T.); +#298970 = LINE('',#298971,#298972); +#298971 = CARTESIAN_POINT('',(130.518869,-64.8,1.51)); +#298972 = VECTOR('',#298973,1.); +#298973 = DIRECTION('',(-0.999995472422,3.009175288807E-03,0.)); +#298974 = PLANE('',#298975); +#298975 = AXIS2_PLACEMENT_3D('',#298976,#298977,#298978); +#298976 = CARTESIAN_POINT('',(130.518869,-64.8,1.51)); +#298977 = DIRECTION('',(-3.009175288807E-03,-0.999995472422,0.)); +#298978 = DIRECTION('',(-0.999995472422,3.009175288807E-03,0.)); +#298979 = ADVANCED_FACE('',(#298980),#299005,.T.); +#298980 = FACE_BOUND('',#298981,.T.); +#298981 = EDGE_LOOP('',(#298982,#298983,#298991,#298999)); +#298982 = ORIENTED_EDGE('',*,*,#298961,.T.); +#298983 = ORIENTED_EDGE('',*,*,#298984,.T.); +#298984 = EDGE_CURVE('',#298954,#298985,#298987,.T.); +#298985 = VERTEX_POINT('',#298986); +#298986 = CARTESIAN_POINT('',(129.844443,-64.783147,1.545)); +#298987 = LINE('',#298988,#298989); +#298988 = CARTESIAN_POINT('',(129.880491,-64.798079,1.545)); +#298989 = VECTOR('',#298990,1.); +#298990 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#298991 = ORIENTED_EDGE('',*,*,#298992,.F.); +#298992 = EDGE_CURVE('',#298993,#298985,#298995,.T.); +#298993 = VERTEX_POINT('',#298994); +#298994 = CARTESIAN_POINT('',(129.844443,-64.783147,1.51)); +#298995 = LINE('',#298996,#298997); +#298996 = CARTESIAN_POINT('',(129.844443,-64.783147,1.51)); +#298997 = VECTOR('',#298998,1.); +#298998 = DIRECTION('',(0.,0.,1.)); +#298999 = ORIENTED_EDGE('',*,*,#299000,.F.); +#299000 = EDGE_CURVE('',#298962,#298993,#299001,.T.); +#299001 = LINE('',#299002,#299003); +#299002 = CARTESIAN_POINT('',(129.880491,-64.798079,1.51)); +#299003 = VECTOR('',#299004,1.); +#299004 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#299005 = PLANE('',#299006); +#299006 = AXIS2_PLACEMENT_3D('',#299007,#299008,#299009); +#299007 = CARTESIAN_POINT('',(129.880491,-64.798079,1.51)); +#299008 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#299009 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#299010 = ADVANCED_FACE('',(#299011),#299036,.T.); +#299011 = FACE_BOUND('',#299012,.T.); +#299012 = EDGE_LOOP('',(#299013,#299014,#299022,#299030)); +#299013 = ORIENTED_EDGE('',*,*,#298992,.T.); +#299014 = ORIENTED_EDGE('',*,*,#299015,.T.); +#299015 = EDGE_CURVE('',#298985,#299016,#299018,.T.); +#299016 = VERTEX_POINT('',#299017); +#299017 = CARTESIAN_POINT('',(129.808579,-64.75,1.545)); +#299018 = LINE('',#299019,#299020); +#299019 = CARTESIAN_POINT('',(129.844443,-64.783147,1.545)); +#299020 = VECTOR('',#299021,1.); +#299021 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299022 = ORIENTED_EDGE('',*,*,#299023,.F.); +#299023 = EDGE_CURVE('',#299024,#299016,#299026,.T.); +#299024 = VERTEX_POINT('',#299025); +#299025 = CARTESIAN_POINT('',(129.808579,-64.75,1.51)); +#299026 = LINE('',#299027,#299028); +#299027 = CARTESIAN_POINT('',(129.808579,-64.75,1.51)); +#299028 = VECTOR('',#299029,1.); +#299029 = DIRECTION('',(0.,0.,1.)); +#299030 = ORIENTED_EDGE('',*,*,#299031,.F.); +#299031 = EDGE_CURVE('',#298993,#299024,#299032,.T.); +#299032 = LINE('',#299033,#299034); +#299033 = CARTESIAN_POINT('',(129.844443,-64.783147,1.51)); +#299034 = VECTOR('',#299035,1.); +#299035 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299036 = PLANE('',#299037); +#299037 = AXIS2_PLACEMENT_3D('',#299038,#299039,#299040); +#299038 = CARTESIAN_POINT('',(129.844443,-64.783147,1.51)); +#299039 = DIRECTION('',(-0.67874177438,-0.734377017418,0.)); +#299040 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299041 = ADVANCED_FACE('',(#299042),#299067,.T.); +#299042 = FACE_BOUND('',#299043,.T.); +#299043 = EDGE_LOOP('',(#299044,#299045,#299053,#299061)); +#299044 = ORIENTED_EDGE('',*,*,#299023,.T.); +#299045 = ORIENTED_EDGE('',*,*,#299046,.T.); +#299046 = EDGE_CURVE('',#299016,#299047,#299049,.T.); +#299047 = VERTEX_POINT('',#299048); +#299048 = CARTESIAN_POINT('',(127.730491,-64.748079,1.545)); +#299049 = LINE('',#299050,#299051); +#299050 = CARTESIAN_POINT('',(129.808579,-64.75,1.545)); +#299051 = VECTOR('',#299052,1.); +#299052 = DIRECTION('',(-0.999999572736,9.244070410979E-04,0.)); +#299053 = ORIENTED_EDGE('',*,*,#299054,.F.); +#299054 = EDGE_CURVE('',#299055,#299047,#299057,.T.); +#299055 = VERTEX_POINT('',#299056); +#299056 = CARTESIAN_POINT('',(127.730491,-64.748079,1.51)); +#299057 = LINE('',#299058,#299059); +#299058 = CARTESIAN_POINT('',(127.730491,-64.748079,1.51)); +#299059 = VECTOR('',#299060,1.); +#299060 = DIRECTION('',(0.,0.,1.)); +#299061 = ORIENTED_EDGE('',*,*,#299062,.F.); +#299062 = EDGE_CURVE('',#299024,#299055,#299063,.T.); +#299063 = LINE('',#299064,#299065); +#299064 = CARTESIAN_POINT('',(129.808579,-64.75,1.51)); +#299065 = VECTOR('',#299066,1.); +#299066 = DIRECTION('',(-0.999999572736,9.244070410979E-04,0.)); +#299067 = PLANE('',#299068); +#299068 = AXIS2_PLACEMENT_3D('',#299069,#299070,#299071); +#299069 = CARTESIAN_POINT('',(129.808579,-64.75,1.51)); +#299070 = DIRECTION('',(-9.244070410979E-04,-0.999999572736,0.)); +#299071 = DIRECTION('',(-0.999999572736,9.244070410979E-04,0.)); +#299072 = ADVANCED_FACE('',(#299073),#299098,.T.); +#299073 = FACE_BOUND('',#299074,.T.); +#299074 = EDGE_LOOP('',(#299075,#299076,#299084,#299092)); +#299075 = ORIENTED_EDGE('',*,*,#299054,.T.); +#299076 = ORIENTED_EDGE('',*,*,#299077,.T.); +#299077 = EDGE_CURVE('',#299047,#299078,#299080,.T.); +#299078 = VERTEX_POINT('',#299079); +#299079 = CARTESIAN_POINT('',(127.694442,-64.733147,1.545)); +#299080 = LINE('',#299081,#299082); +#299081 = CARTESIAN_POINT('',(127.730491,-64.748079,1.545)); +#299082 = VECTOR('',#299083,1.); +#299083 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#299084 = ORIENTED_EDGE('',*,*,#299085,.F.); +#299085 = EDGE_CURVE('',#299086,#299078,#299088,.T.); +#299086 = VERTEX_POINT('',#299087); +#299087 = CARTESIAN_POINT('',(127.694442,-64.733147,1.51)); +#299088 = LINE('',#299089,#299090); +#299089 = CARTESIAN_POINT('',(127.694442,-64.733147,1.51)); +#299090 = VECTOR('',#299091,1.); +#299091 = DIRECTION('',(0.,0.,1.)); +#299092 = ORIENTED_EDGE('',*,*,#299093,.F.); +#299093 = EDGE_CURVE('',#299055,#299086,#299094,.T.); +#299094 = LINE('',#299095,#299096); +#299095 = CARTESIAN_POINT('',(127.730491,-64.748079,1.51)); +#299096 = VECTOR('',#299097,1.); +#299097 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#299098 = PLANE('',#299099); +#299099 = AXIS2_PLACEMENT_3D('',#299100,#299101,#299102); +#299100 = CARTESIAN_POINT('',(127.730491,-64.748079,1.51)); +#299101 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#299102 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#299103 = ADVANCED_FACE('',(#299104),#299129,.T.); +#299104 = FACE_BOUND('',#299105,.T.); +#299105 = EDGE_LOOP('',(#299106,#299107,#299115,#299123)); +#299106 = ORIENTED_EDGE('',*,*,#299085,.T.); +#299107 = ORIENTED_EDGE('',*,*,#299108,.T.); +#299108 = EDGE_CURVE('',#299078,#299109,#299111,.T.); +#299109 = VERTEX_POINT('',#299110); +#299110 = CARTESIAN_POINT('',(127.416853,-64.455557,1.545)); +#299111 = LINE('',#299112,#299113); +#299112 = CARTESIAN_POINT('',(127.694442,-64.733147,1.545)); +#299113 = VECTOR('',#299114,1.); +#299114 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#299115 = ORIENTED_EDGE('',*,*,#299116,.F.); +#299116 = EDGE_CURVE('',#299117,#299109,#299119,.T.); +#299117 = VERTEX_POINT('',#299118); +#299118 = CARTESIAN_POINT('',(127.416853,-64.455557,1.51)); +#299119 = LINE('',#299120,#299121); +#299120 = CARTESIAN_POINT('',(127.416853,-64.455557,1.51)); +#299121 = VECTOR('',#299122,1.); +#299122 = DIRECTION('',(0.,0.,1.)); +#299123 = ORIENTED_EDGE('',*,*,#299124,.F.); +#299124 = EDGE_CURVE('',#299086,#299117,#299125,.T.); +#299125 = LINE('',#299126,#299127); +#299126 = CARTESIAN_POINT('',(127.694442,-64.733147,1.51)); +#299127 = VECTOR('',#299128,1.); +#299128 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#299129 = PLANE('',#299130); +#299130 = AXIS2_PLACEMENT_3D('',#299131,#299132,#299133); +#299131 = CARTESIAN_POINT('',(127.694442,-64.733147,1.51)); +#299132 = DIRECTION('',(-0.707108054841,-0.70710550753,0.)); +#299133 = DIRECTION('',(-0.70710550753,0.707108054841,0.)); +#299134 = ADVANCED_FACE('',(#299135),#299162,.T.); +#299135 = FACE_BOUND('',#299136,.T.); +#299136 = EDGE_LOOP('',(#299137,#299138,#299147,#299155)); +#299137 = ORIENTED_EDGE('',*,*,#299116,.T.); +#299138 = ORIENTED_EDGE('',*,*,#299139,.T.); +#299139 = EDGE_CURVE('',#299109,#299140,#299142,.T.); +#299140 = VERTEX_POINT('',#299141); +#299141 = CARTESIAN_POINT('',(127.555557,-64.316853,1.545)); +#299142 = CIRCLE('',#299143,9.999988522644E-02); +#299143 = AXIS2_PLACEMENT_3D('',#299144,#299145,#299146); +#299144 = CARTESIAN_POINT('',(127.49999951407,-64.39999951407,1.545)); +#299145 = DIRECTION('',(0.,0.,-1.)); +#299146 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#299147 = ORIENTED_EDGE('',*,*,#299148,.F.); +#299148 = EDGE_CURVE('',#299149,#299140,#299151,.T.); +#299149 = VERTEX_POINT('',#299150); +#299150 = CARTESIAN_POINT('',(127.555557,-64.316853,1.51)); +#299151 = LINE('',#299152,#299153); +#299152 = CARTESIAN_POINT('',(127.555557,-64.316853,1.51)); +#299153 = VECTOR('',#299154,1.); +#299154 = DIRECTION('',(0.,0.,1.)); +#299155 = ORIENTED_EDGE('',*,*,#299156,.F.); +#299156 = EDGE_CURVE('',#299117,#299149,#299157,.T.); +#299157 = CIRCLE('',#299158,9.999988522644E-02); +#299158 = AXIS2_PLACEMENT_3D('',#299159,#299160,#299161); +#299159 = CARTESIAN_POINT('',(127.49999951407,-64.39999951407,1.51)); +#299160 = DIRECTION('',(0.,0.,-1.)); +#299161 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#299162 = CYLINDRICAL_SURFACE('',#299163,9.999988522644E-02); +#299163 = AXIS2_PLACEMENT_3D('',#299164,#299165,#299166); +#299164 = CARTESIAN_POINT('',(127.49999951407,-64.39999951407,1.51)); +#299165 = DIRECTION('',(0.,0.,-1.)); +#299166 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#299167 = ADVANCED_FACE('',(#299168),#299184,.T.); +#299168 = FACE_BOUND('',#299169,.T.); +#299169 = EDGE_LOOP('',(#299170,#299171,#299177,#299178)); +#299170 = ORIENTED_EDGE('',*,*,#299148,.T.); +#299171 = ORIENTED_EDGE('',*,*,#299172,.T.); +#299172 = EDGE_CURVE('',#299140,#298727,#299173,.T.); +#299173 = LINE('',#299174,#299175); +#299174 = CARTESIAN_POINT('',(127.555557,-64.316853,1.545)); +#299175 = VECTOR('',#299176,1.); +#299176 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#299177 = ORIENTED_EDGE('',*,*,#298724,.F.); +#299178 = ORIENTED_EDGE('',*,*,#299179,.F.); +#299179 = EDGE_CURVE('',#299149,#298725,#299180,.T.); +#299180 = LINE('',#299181,#299182); +#299181 = CARTESIAN_POINT('',(127.555557,-64.316853,1.51)); +#299182 = VECTOR('',#299183,1.); +#299183 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#299184 = PLANE('',#299185); +#299185 = AXIS2_PLACEMENT_3D('',#299186,#299187,#299188); +#299186 = CARTESIAN_POINT('',(127.555557,-64.316853,1.51)); +#299187 = DIRECTION('',(0.702998686558,0.711191146386,-0.)); +#299188 = DIRECTION('',(0.711191146386,-0.702998686558,0.)); +#299189 = ADVANCED_FACE('',(#299190),#299217,.F.); +#299190 = FACE_BOUND('',#299191,.T.); +#299191 = EDGE_LOOP('',(#299192,#299202,#299209,#299210)); +#299192 = ORIENTED_EDGE('',*,*,#299193,.T.); +#299193 = EDGE_CURVE('',#299194,#299196,#299198,.T.); +#299194 = VERTEX_POINT('',#299195); +#299195 = CARTESIAN_POINT('',(130.937255,-64.7,1.51)); +#299196 = VERTEX_POINT('',#299197); +#299197 = CARTESIAN_POINT('',(130.937255,-64.7,1.545)); +#299198 = LINE('',#299199,#299200); +#299199 = CARTESIAN_POINT('',(130.937255,-64.7,1.51)); +#299200 = VECTOR('',#299201,1.); +#299201 = DIRECTION('',(0.,0.,1.)); +#299202 = ORIENTED_EDGE('',*,*,#299203,.T.); +#299203 = EDGE_CURVE('',#299196,#299196,#299204,.T.); +#299204 = CIRCLE('',#299205,0.137255); +#299205 = AXIS2_PLACEMENT_3D('',#299206,#299207,#299208); +#299206 = CARTESIAN_POINT('',(130.8,-64.7,1.545)); +#299207 = DIRECTION('',(0.,0.,1.)); +#299208 = DIRECTION('',(1.,0.,-0.)); +#299209 = ORIENTED_EDGE('',*,*,#299193,.F.); +#299210 = ORIENTED_EDGE('',*,*,#299211,.F.); +#299211 = EDGE_CURVE('',#299194,#299194,#299212,.T.); +#299212 = CIRCLE('',#299213,0.137255); +#299213 = AXIS2_PLACEMENT_3D('',#299214,#299215,#299216); +#299214 = CARTESIAN_POINT('',(130.8,-64.7,1.51)); +#299215 = DIRECTION('',(0.,0.,1.)); +#299216 = DIRECTION('',(1.,0.,-0.)); +#299217 = CYLINDRICAL_SURFACE('',#299218,0.137255); +#299218 = AXIS2_PLACEMENT_3D('',#299219,#299220,#299221); +#299219 = CARTESIAN_POINT('',(130.8,-64.7,1.51)); +#299220 = DIRECTION('',(-0.,-0.,-1.)); +#299221 = DIRECTION('',(1.,0.,-0.)); +#299222 = ADVANCED_FACE('',(#299223,#299240),#299243,.F.); +#299223 = FACE_BOUND('',#299224,.T.); +#299224 = EDGE_LOOP('',(#299225,#299226,#299227,#299228,#299229,#299230, + #299231,#299232,#299233,#299234,#299235,#299236,#299237,#299238, + #299239)); +#299225 = ORIENTED_EDGE('',*,*,#298750,.T.); +#299226 = ORIENTED_EDGE('',*,*,#298781,.T.); +#299227 = ORIENTED_EDGE('',*,*,#298812,.T.); +#299228 = ORIENTED_EDGE('',*,*,#298843,.T.); +#299229 = ORIENTED_EDGE('',*,*,#298874,.T.); +#299230 = ORIENTED_EDGE('',*,*,#298906,.T.); +#299231 = ORIENTED_EDGE('',*,*,#298938,.T.); +#299232 = ORIENTED_EDGE('',*,*,#298969,.T.); +#299233 = ORIENTED_EDGE('',*,*,#299000,.T.); +#299234 = ORIENTED_EDGE('',*,*,#299031,.T.); +#299235 = ORIENTED_EDGE('',*,*,#299062,.T.); +#299236 = ORIENTED_EDGE('',*,*,#299093,.T.); +#299237 = ORIENTED_EDGE('',*,*,#299124,.T.); +#299238 = ORIENTED_EDGE('',*,*,#299156,.T.); +#299239 = ORIENTED_EDGE('',*,*,#299179,.T.); +#299240 = FACE_BOUND('',#299241,.T.); +#299241 = EDGE_LOOP('',(#299242)); +#299242 = ORIENTED_EDGE('',*,*,#299211,.T.); +#299243 = PLANE('',#299244); +#299244 = AXIS2_PLACEMENT_3D('',#299245,#299246,#299247); +#299245 = CARTESIAN_POINT('',(0.,0.,1.51)); +#299246 = DIRECTION('',(0.,0.,1.)); +#299247 = DIRECTION('',(1.,0.,-0.)); +#299248 = ADVANCED_FACE('',(#299249,#299266),#299269,.T.); +#299249 = FACE_BOUND('',#299250,.F.); +#299250 = EDGE_LOOP('',(#299251,#299252,#299253,#299254,#299255,#299256, + #299257,#299258,#299259,#299260,#299261,#299262,#299263,#299264, + #299265)); +#299251 = ORIENTED_EDGE('',*,*,#298734,.T.); +#299252 = ORIENTED_EDGE('',*,*,#298765,.T.); +#299253 = ORIENTED_EDGE('',*,*,#298796,.T.); +#299254 = ORIENTED_EDGE('',*,*,#298827,.T.); +#299255 = ORIENTED_EDGE('',*,*,#298858,.T.); +#299256 = ORIENTED_EDGE('',*,*,#298889,.T.); +#299257 = ORIENTED_EDGE('',*,*,#298922,.T.); +#299258 = ORIENTED_EDGE('',*,*,#298953,.T.); +#299259 = ORIENTED_EDGE('',*,*,#298984,.T.); +#299260 = ORIENTED_EDGE('',*,*,#299015,.T.); +#299261 = ORIENTED_EDGE('',*,*,#299046,.T.); +#299262 = ORIENTED_EDGE('',*,*,#299077,.T.); +#299263 = ORIENTED_EDGE('',*,*,#299108,.T.); +#299264 = ORIENTED_EDGE('',*,*,#299139,.T.); +#299265 = ORIENTED_EDGE('',*,*,#299172,.T.); +#299266 = FACE_BOUND('',#299267,.F.); +#299267 = EDGE_LOOP('',(#299268)); +#299268 = ORIENTED_EDGE('',*,*,#299203,.T.); +#299269 = PLANE('',#299270); +#299270 = AXIS2_PLACEMENT_3D('',#299271,#299272,#299273); +#299271 = CARTESIAN_POINT('',(0.,0.,1.545)); +#299272 = DIRECTION('',(0.,0.,1.)); +#299273 = DIRECTION('',(1.,0.,-0.)); +#299274 = MANIFOLD_SOLID_BREP('',#299275); +#299275 = CLOSED_SHELL('',(#299276,#299316,#299349,#299380,#299413, + #299444,#299475,#299506,#299539,#299561,#299594,#299614)); +#299276 = ADVANCED_FACE('',(#299277),#299311,.F.); +#299277 = FACE_BOUND('',#299278,.F.); +#299278 = EDGE_LOOP('',(#299279,#299289,#299297,#299305)); +#299279 = ORIENTED_EDGE('',*,*,#299280,.T.); +#299280 = EDGE_CURVE('',#299281,#299283,#299285,.T.); +#299281 = VERTEX_POINT('',#299282); +#299282 = CARTESIAN_POINT('',(136.181131,-157.1,0.)); +#299283 = VERTEX_POINT('',#299284); +#299284 = CARTESIAN_POINT('',(136.181131,-157.1,-3.5E-02)); +#299285 = LINE('',#299286,#299287); +#299286 = CARTESIAN_POINT('',(136.181131,-157.1,0.)); +#299287 = VECTOR('',#299288,1.); +#299288 = DIRECTION('',(0.,0.,-1.)); +#299289 = ORIENTED_EDGE('',*,*,#299290,.T.); +#299290 = EDGE_CURVE('',#299283,#299291,#299293,.T.); +#299291 = VERTEX_POINT('',#299292); +#299292 = CARTESIAN_POINT('',(137.369509,-157.101921,-3.5E-02)); +#299293 = LINE('',#299294,#299295); +#299294 = CARTESIAN_POINT('',(136.181131,-157.1,-3.5E-02)); +#299295 = VECTOR('',#299296,1.); +#299296 = DIRECTION('',(0.999998693484,-1.616486917625E-03,0.)); +#299297 = ORIENTED_EDGE('',*,*,#299298,.F.); +#299298 = EDGE_CURVE('',#299299,#299291,#299301,.T.); +#299299 = VERTEX_POINT('',#299300); +#299300 = CARTESIAN_POINT('',(137.369509,-157.101921,0.)); +#299301 = LINE('',#299302,#299303); +#299302 = CARTESIAN_POINT('',(137.369509,-157.101921,0.)); +#299303 = VECTOR('',#299304,1.); +#299304 = DIRECTION('',(0.,0.,-1.)); +#299305 = ORIENTED_EDGE('',*,*,#299306,.F.); +#299306 = EDGE_CURVE('',#299281,#299299,#299307,.T.); +#299307 = LINE('',#299308,#299309); +#299308 = CARTESIAN_POINT('',(136.181131,-157.1,0.)); +#299309 = VECTOR('',#299310,1.); +#299310 = DIRECTION('',(0.999998693484,-1.616486917625E-03,0.)); +#299311 = PLANE('',#299312); +#299312 = AXIS2_PLACEMENT_3D('',#299313,#299314,#299315); +#299313 = CARTESIAN_POINT('',(136.181131,-157.1,0.)); +#299314 = DIRECTION('',(-1.616486917625E-03,-0.999998693484,-0.)); +#299315 = DIRECTION('',(0.999998693484,-1.616486917625E-03,0.)); +#299316 = ADVANCED_FACE('',(#299317),#299344,.T.); +#299317 = FACE_BOUND('',#299318,.F.); +#299318 = EDGE_LOOP('',(#299319,#299320,#299329,#299337)); +#299319 = ORIENTED_EDGE('',*,*,#299298,.T.); +#299320 = ORIENTED_EDGE('',*,*,#299321,.T.); +#299321 = EDGE_CURVE('',#299291,#299322,#299324,.T.); +#299322 = VERTEX_POINT('',#299323); +#299323 = CARTESIAN_POINT('',(137.498079,-157.230491,-3.5E-02)); +#299324 = CIRCLE('',#299325,0.191468187874); +#299325 = AXIS2_PLACEMENT_3D('',#299326,#299327,#299328); +#299326 = CARTESIAN_POINT('',(137.31464085376,-157.2853591462,-3.5E-02) + ); +#299327 = DIRECTION('',(0.,0.,-1.)); +#299328 = DIRECTION('',(0.286565339386,0.958060700719,0.)); +#299329 = ORIENTED_EDGE('',*,*,#299330,.F.); +#299330 = EDGE_CURVE('',#299331,#299322,#299333,.T.); +#299331 = VERTEX_POINT('',#299332); +#299332 = CARTESIAN_POINT('',(137.498079,-157.230491,0.)); +#299333 = LINE('',#299334,#299335); +#299334 = CARTESIAN_POINT('',(137.498079,-157.230491,0.)); +#299335 = VECTOR('',#299336,1.); +#299336 = DIRECTION('',(0.,0.,-1.)); +#299337 = ORIENTED_EDGE('',*,*,#299338,.F.); +#299338 = EDGE_CURVE('',#299299,#299331,#299339,.T.); +#299339 = CIRCLE('',#299340,0.191468187874); +#299340 = AXIS2_PLACEMENT_3D('',#299341,#299342,#299343); +#299341 = CARTESIAN_POINT('',(137.31464085376,-157.2853591462,0.)); +#299342 = DIRECTION('',(0.,0.,-1.)); +#299343 = DIRECTION('',(0.286565339386,0.958060700719,0.)); +#299344 = CYLINDRICAL_SURFACE('',#299345,0.191468187874); +#299345 = AXIS2_PLACEMENT_3D('',#299346,#299347,#299348); +#299346 = CARTESIAN_POINT('',(137.31464085376,-157.2853591462,0.)); +#299347 = DIRECTION('',(-0.,-0.,1.)); +#299348 = DIRECTION('',(0.286565339386,0.958060700719,0.)); +#299349 = ADVANCED_FACE('',(#299350),#299375,.F.); +#299350 = FACE_BOUND('',#299351,.F.); +#299351 = EDGE_LOOP('',(#299352,#299353,#299361,#299369)); +#299352 = ORIENTED_EDGE('',*,*,#299330,.T.); +#299353 = ORIENTED_EDGE('',*,*,#299354,.T.); +#299354 = EDGE_CURVE('',#299322,#299355,#299357,.T.); +#299355 = VERTEX_POINT('',#299356); +#299356 = CARTESIAN_POINT('',(137.498079,-157.269509,-3.5E-02)); +#299357 = LINE('',#299358,#299359); +#299358 = CARTESIAN_POINT('',(137.498079,-157.230491,-3.5E-02)); +#299359 = VECTOR('',#299360,1.); +#299360 = DIRECTION('',(0.,-1.,0.)); +#299361 = ORIENTED_EDGE('',*,*,#299362,.F.); +#299362 = EDGE_CURVE('',#299363,#299355,#299365,.T.); +#299363 = VERTEX_POINT('',#299364); +#299364 = CARTESIAN_POINT('',(137.498079,-157.269509,0.)); +#299365 = LINE('',#299366,#299367); +#299366 = CARTESIAN_POINT('',(137.498079,-157.269509,0.)); +#299367 = VECTOR('',#299368,1.); +#299368 = DIRECTION('',(0.,0.,-1.)); +#299369 = ORIENTED_EDGE('',*,*,#299370,.F.); +#299370 = EDGE_CURVE('',#299331,#299363,#299371,.T.); +#299371 = LINE('',#299372,#299373); +#299372 = CARTESIAN_POINT('',(137.498079,-157.230491,0.)); +#299373 = VECTOR('',#299374,1.); +#299374 = DIRECTION('',(0.,-1.,0.)); +#299375 = PLANE('',#299376); +#299376 = AXIS2_PLACEMENT_3D('',#299377,#299378,#299379); +#299377 = CARTESIAN_POINT('',(137.498079,-157.230491,0.)); +#299378 = DIRECTION('',(-1.,-0.,-0.)); +#299379 = DIRECTION('',(0.,-1.,0.)); +#299380 = ADVANCED_FACE('',(#299381),#299408,.T.); +#299381 = FACE_BOUND('',#299382,.F.); +#299382 = EDGE_LOOP('',(#299383,#299384,#299393,#299401)); +#299383 = ORIENTED_EDGE('',*,*,#299362,.T.); +#299384 = ORIENTED_EDGE('',*,*,#299385,.T.); +#299385 = EDGE_CURVE('',#299355,#299386,#299388,.T.); +#299386 = VERTEX_POINT('',#299387); +#299387 = CARTESIAN_POINT('',(137.344443,-157.333147,-3.5E-02)); +#299388 = CIRCLE('',#299389,9.999986478834E-02); +#299389 = AXIS2_PLACEMENT_3D('',#299390,#299391,#299392); +#299390 = CARTESIAN_POINT('',(137.4000005,-157.2500005199,-3.5E-02)); +#299391 = DIRECTION('',(-0.,0.,-1.)); +#299392 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#299393 = ORIENTED_EDGE('',*,*,#299394,.F.); +#299394 = EDGE_CURVE('',#299395,#299386,#299397,.T.); +#299395 = VERTEX_POINT('',#299396); +#299396 = CARTESIAN_POINT('',(137.344443,-157.333147,0.)); +#299397 = LINE('',#299398,#299399); +#299398 = CARTESIAN_POINT('',(137.344443,-157.333147,0.)); +#299399 = VECTOR('',#299400,1.); +#299400 = DIRECTION('',(0.,0.,-1.)); +#299401 = ORIENTED_EDGE('',*,*,#299402,.F.); +#299402 = EDGE_CURVE('',#299363,#299395,#299403,.T.); +#299403 = CIRCLE('',#299404,9.999986478834E-02); +#299404 = AXIS2_PLACEMENT_3D('',#299405,#299406,#299407); +#299405 = CARTESIAN_POINT('',(137.4000005,-157.2500005199,0.)); +#299406 = DIRECTION('',(-0.,0.,-1.)); +#299407 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#299408 = CYLINDRICAL_SURFACE('',#299409,9.999986478834E-02); +#299409 = AXIS2_PLACEMENT_3D('',#299410,#299411,#299412); +#299410 = CARTESIAN_POINT('',(137.4000005,-157.2500005199,0.)); +#299411 = DIRECTION('',(0.,-0.,1.)); +#299412 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#299413 = ADVANCED_FACE('',(#299414),#299439,.F.); +#299414 = FACE_BOUND('',#299415,.F.); +#299415 = EDGE_LOOP('',(#299416,#299417,#299425,#299433)); +#299416 = ORIENTED_EDGE('',*,*,#299394,.T.); +#299417 = ORIENTED_EDGE('',*,*,#299418,.T.); +#299418 = EDGE_CURVE('',#299386,#299419,#299421,.T.); +#299419 = VERTEX_POINT('',#299420); +#299420 = CARTESIAN_POINT('',(137.308579,-157.3,-3.5E-02)); +#299421 = LINE('',#299422,#299423); +#299422 = CARTESIAN_POINT('',(137.344443,-157.333147,-3.5E-02)); +#299423 = VECTOR('',#299424,1.); +#299424 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299425 = ORIENTED_EDGE('',*,*,#299426,.F.); +#299426 = EDGE_CURVE('',#299427,#299419,#299429,.T.); +#299427 = VERTEX_POINT('',#299428); +#299428 = CARTESIAN_POINT('',(137.308579,-157.3,0.)); +#299429 = LINE('',#299430,#299431); +#299430 = CARTESIAN_POINT('',(137.308579,-157.3,0.)); +#299431 = VECTOR('',#299432,1.); +#299432 = DIRECTION('',(0.,0.,-1.)); +#299433 = ORIENTED_EDGE('',*,*,#299434,.F.); +#299434 = EDGE_CURVE('',#299395,#299427,#299435,.T.); +#299435 = LINE('',#299436,#299437); +#299436 = CARTESIAN_POINT('',(137.344443,-157.333147,0.)); +#299437 = VECTOR('',#299438,1.); +#299438 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299439 = PLANE('',#299440); +#299440 = AXIS2_PLACEMENT_3D('',#299441,#299442,#299443); +#299441 = CARTESIAN_POINT('',(137.344443,-157.333147,0.)); +#299442 = DIRECTION('',(0.67874177438,0.734377017418,0.)); +#299443 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#299444 = ADVANCED_FACE('',(#299445),#299470,.F.); +#299445 = FACE_BOUND('',#299446,.F.); +#299446 = EDGE_LOOP('',(#299447,#299448,#299456,#299464)); +#299447 = ORIENTED_EDGE('',*,*,#299426,.T.); +#299448 = ORIENTED_EDGE('',*,*,#299449,.T.); +#299449 = EDGE_CURVE('',#299419,#299450,#299452,.T.); +#299450 = VERTEX_POINT('',#299451); +#299451 = CARTESIAN_POINT('',(136.181131,-157.3,-3.5E-02)); +#299452 = LINE('',#299453,#299454); +#299453 = CARTESIAN_POINT('',(137.308579,-157.3,-3.5E-02)); +#299454 = VECTOR('',#299455,1.); +#299455 = DIRECTION('',(-1.,0.,0.)); +#299456 = ORIENTED_EDGE('',*,*,#299457,.F.); +#299457 = EDGE_CURVE('',#299458,#299450,#299460,.T.); +#299458 = VERTEX_POINT('',#299459); +#299459 = CARTESIAN_POINT('',(136.181131,-157.3,0.)); +#299460 = LINE('',#299461,#299462); +#299461 = CARTESIAN_POINT('',(136.181131,-157.3,0.)); +#299462 = VECTOR('',#299463,1.); +#299463 = DIRECTION('',(0.,0.,-1.)); +#299464 = ORIENTED_EDGE('',*,*,#299465,.F.); +#299465 = EDGE_CURVE('',#299427,#299458,#299466,.T.); +#299466 = LINE('',#299467,#299468); +#299467 = CARTESIAN_POINT('',(137.308579,-157.3,0.)); +#299468 = VECTOR('',#299469,1.); +#299469 = DIRECTION('',(-1.,0.,0.)); +#299470 = PLANE('',#299471); +#299471 = AXIS2_PLACEMENT_3D('',#299472,#299473,#299474); +#299472 = CARTESIAN_POINT('',(137.308579,-157.3,0.)); +#299473 = DIRECTION('',(0.,1.,0.)); +#299474 = DIRECTION('',(-1.,0.,0.)); +#299475 = ADVANCED_FACE('',(#299476),#299501,.F.); +#299476 = FACE_BOUND('',#299477,.F.); +#299477 = EDGE_LOOP('',(#299478,#299479,#299487,#299495)); +#299478 = ORIENTED_EDGE('',*,*,#299457,.T.); +#299479 = ORIENTED_EDGE('',*,*,#299480,.T.); +#299480 = EDGE_CURVE('',#299450,#299481,#299483,.T.); +#299481 = VERTEX_POINT('',#299482); +#299482 = CARTESIAN_POINT('',(136.177164,-157.314805,-3.5E-02)); +#299483 = LINE('',#299484,#299485); +#299484 = CARTESIAN_POINT('',(136.181131,-157.3,-3.5E-02)); +#299485 = VECTOR('',#299486,1.); +#299486 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#299487 = ORIENTED_EDGE('',*,*,#299488,.F.); +#299488 = EDGE_CURVE('',#299489,#299481,#299491,.T.); +#299489 = VERTEX_POINT('',#299490); +#299490 = CARTESIAN_POINT('',(136.177164,-157.314805,0.)); +#299491 = LINE('',#299492,#299493); +#299492 = CARTESIAN_POINT('',(136.177164,-157.314805,0.)); +#299493 = VECTOR('',#299494,1.); +#299494 = DIRECTION('',(0.,0.,-1.)); +#299495 = ORIENTED_EDGE('',*,*,#299496,.F.); +#299496 = EDGE_CURVE('',#299458,#299489,#299497,.T.); +#299497 = LINE('',#299498,#299499); +#299498 = CARTESIAN_POINT('',(136.181131,-157.3,0.)); +#299499 = VECTOR('',#299500,1.); +#299500 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#299501 = PLANE('',#299502); +#299502 = AXIS2_PLACEMENT_3D('',#299503,#299504,#299505); +#299503 = CARTESIAN_POINT('',(136.181131,-157.3,0.)); +#299504 = DIRECTION('',(-0.965925627198,0.258819788118,0.)); +#299505 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#299506 = ADVANCED_FACE('',(#299507),#299534,.T.); +#299507 = FACE_BOUND('',#299508,.F.); +#299508 = EDGE_LOOP('',(#299509,#299510,#299519,#299527)); +#299509 = ORIENTED_EDGE('',*,*,#299488,.T.); +#299510 = ORIENTED_EDGE('',*,*,#299511,.T.); +#299511 = EDGE_CURVE('',#299481,#299512,#299514,.T.); +#299512 = VERTEX_POINT('',#299513); +#299513 = CARTESIAN_POINT('',(136.177164,-157.085195,-3.5E-02)); +#299514 = CIRCLE('',#299515,0.299999888633); +#299515 = AXIS2_PLACEMENT_3D('',#299516,#299517,#299518); +#299516 = CARTESIAN_POINT('',(135.90000024848,-157.2,-3.5E-02)); +#299517 = DIRECTION('',(-0.,0.,-1.)); +#299518 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#299519 = ORIENTED_EDGE('',*,*,#299520,.F.); +#299520 = EDGE_CURVE('',#299521,#299512,#299523,.T.); +#299521 = VERTEX_POINT('',#299522); +#299522 = CARTESIAN_POINT('',(136.177164,-157.085195,0.)); +#299523 = LINE('',#299524,#299525); +#299524 = CARTESIAN_POINT('',(136.177164,-157.085195,0.)); +#299525 = VECTOR('',#299526,1.); +#299526 = DIRECTION('',(0.,0.,-1.)); +#299527 = ORIENTED_EDGE('',*,*,#299528,.F.); +#299528 = EDGE_CURVE('',#299489,#299521,#299529,.T.); +#299529 = CIRCLE('',#299530,0.299999888633); +#299530 = AXIS2_PLACEMENT_3D('',#299531,#299532,#299533); +#299531 = CARTESIAN_POINT('',(135.90000024848,-157.2,0.)); +#299532 = DIRECTION('',(-0.,0.,-1.)); +#299533 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#299534 = CYLINDRICAL_SURFACE('',#299535,0.299999888633); +#299535 = AXIS2_PLACEMENT_3D('',#299536,#299537,#299538); +#299536 = CARTESIAN_POINT('',(135.90000024848,-157.2,0.)); +#299537 = DIRECTION('',(0.,-0.,1.)); +#299538 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#299539 = ADVANCED_FACE('',(#299540),#299556,.F.); +#299540 = FACE_BOUND('',#299541,.F.); +#299541 = EDGE_LOOP('',(#299542,#299543,#299549,#299550)); +#299542 = ORIENTED_EDGE('',*,*,#299520,.T.); +#299543 = ORIENTED_EDGE('',*,*,#299544,.T.); +#299544 = EDGE_CURVE('',#299512,#299283,#299545,.T.); +#299545 = LINE('',#299546,#299547); +#299546 = CARTESIAN_POINT('',(136.177164,-157.085195,-3.5E-02)); +#299547 = VECTOR('',#299548,1.); +#299548 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#299549 = ORIENTED_EDGE('',*,*,#299280,.F.); +#299550 = ORIENTED_EDGE('',*,*,#299551,.F.); +#299551 = EDGE_CURVE('',#299521,#299281,#299552,.T.); +#299552 = LINE('',#299553,#299554); +#299553 = CARTESIAN_POINT('',(136.177164,-157.085195,0.)); +#299554 = VECTOR('',#299555,1.); +#299555 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#299556 = PLANE('',#299557); +#299557 = AXIS2_PLACEMENT_3D('',#299558,#299559,#299560); +#299558 = CARTESIAN_POINT('',(136.177164,-157.085195,0.)); +#299559 = DIRECTION('',(-0.965925627198,-0.258819788118,-0.)); +#299560 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#299561 = ADVANCED_FACE('',(#299562),#299589,.F.); +#299562 = FACE_BOUND('',#299563,.F.); +#299563 = EDGE_LOOP('',(#299564,#299574,#299581,#299582)); +#299564 = ORIENTED_EDGE('',*,*,#299565,.T.); +#299565 = EDGE_CURVE('',#299566,#299568,#299570,.T.); +#299566 = VERTEX_POINT('',#299567); +#299567 = CARTESIAN_POINT('',(136.037255,-157.2,0.)); +#299568 = VERTEX_POINT('',#299569); +#299569 = CARTESIAN_POINT('',(136.037255,-157.2,-3.5E-02)); +#299570 = LINE('',#299571,#299572); +#299571 = CARTESIAN_POINT('',(136.037255,-157.2,0.)); +#299572 = VECTOR('',#299573,1.); +#299573 = DIRECTION('',(0.,0.,-1.)); +#299574 = ORIENTED_EDGE('',*,*,#299575,.T.); +#299575 = EDGE_CURVE('',#299568,#299568,#299576,.T.); +#299576 = CIRCLE('',#299577,0.137255); +#299577 = AXIS2_PLACEMENT_3D('',#299578,#299579,#299580); +#299578 = CARTESIAN_POINT('',(135.9,-157.2,-3.5E-02)); +#299579 = DIRECTION('',(0.,0.,1.)); +#299580 = DIRECTION('',(1.,0.,-0.)); +#299581 = ORIENTED_EDGE('',*,*,#299565,.F.); +#299582 = ORIENTED_EDGE('',*,*,#299583,.F.); +#299583 = EDGE_CURVE('',#299566,#299566,#299584,.T.); +#299584 = CIRCLE('',#299585,0.137255); +#299585 = AXIS2_PLACEMENT_3D('',#299586,#299587,#299588); +#299586 = CARTESIAN_POINT('',(135.9,-157.2,0.)); +#299587 = DIRECTION('',(0.,0.,1.)); +#299588 = DIRECTION('',(1.,0.,-0.)); +#299589 = CYLINDRICAL_SURFACE('',#299590,0.137255); +#299590 = AXIS2_PLACEMENT_3D('',#299591,#299592,#299593); +#299591 = CARTESIAN_POINT('',(135.9,-157.2,0.)); +#299592 = DIRECTION('',(0.,0.,1.)); +#299593 = DIRECTION('',(1.,0.,-0.)); +#299594 = ADVANCED_FACE('',(#299595,#299606),#299609,.F.); +#299595 = FACE_BOUND('',#299596,.F.); +#299596 = EDGE_LOOP('',(#299597,#299598,#299599,#299600,#299601,#299602, + #299603,#299604,#299605)); +#299597 = ORIENTED_EDGE('',*,*,#299306,.T.); +#299598 = ORIENTED_EDGE('',*,*,#299338,.T.); +#299599 = ORIENTED_EDGE('',*,*,#299370,.T.); +#299600 = ORIENTED_EDGE('',*,*,#299402,.T.); +#299601 = ORIENTED_EDGE('',*,*,#299434,.T.); +#299602 = ORIENTED_EDGE('',*,*,#299465,.T.); +#299603 = ORIENTED_EDGE('',*,*,#299496,.T.); +#299604 = ORIENTED_EDGE('',*,*,#299528,.T.); +#299605 = ORIENTED_EDGE('',*,*,#299551,.T.); +#299606 = FACE_BOUND('',#299607,.F.); +#299607 = EDGE_LOOP('',(#299608)); +#299608 = ORIENTED_EDGE('',*,*,#299583,.T.); +#299609 = PLANE('',#299610); +#299610 = AXIS2_PLACEMENT_3D('',#299611,#299612,#299613); +#299611 = CARTESIAN_POINT('',(0.,0.,0.)); +#299612 = DIRECTION('',(-0.,-0.,-1.)); +#299613 = DIRECTION('',(-1.,0.,0.)); +#299614 = ADVANCED_FACE('',(#299615,#299626),#299629,.T.); +#299615 = FACE_BOUND('',#299616,.T.); +#299616 = EDGE_LOOP('',(#299617,#299618,#299619,#299620,#299621,#299622, + #299623,#299624,#299625)); +#299617 = ORIENTED_EDGE('',*,*,#299290,.T.); +#299618 = ORIENTED_EDGE('',*,*,#299321,.T.); +#299619 = ORIENTED_EDGE('',*,*,#299354,.T.); +#299620 = ORIENTED_EDGE('',*,*,#299385,.T.); +#299621 = ORIENTED_EDGE('',*,*,#299418,.T.); +#299622 = ORIENTED_EDGE('',*,*,#299449,.T.); +#299623 = ORIENTED_EDGE('',*,*,#299480,.T.); +#299624 = ORIENTED_EDGE('',*,*,#299511,.T.); +#299625 = ORIENTED_EDGE('',*,*,#299544,.T.); +#299626 = FACE_BOUND('',#299627,.T.); +#299627 = EDGE_LOOP('',(#299628)); +#299628 = ORIENTED_EDGE('',*,*,#299575,.T.); +#299629 = PLANE('',#299630); +#299630 = AXIS2_PLACEMENT_3D('',#299631,#299632,#299633); +#299631 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#299632 = DIRECTION('',(-0.,-0.,-1.)); +#299633 = DIRECTION('',(-1.,0.,0.)); +#299634 = MANIFOLD_SOLID_BREP('',#299635); +#299635 = CLOSED_SHELL('',(#299636,#299676,#299707,#299738,#299769, + #299800,#299831,#299862,#299895,#299917,#299950,#299970)); +#299636 = ADVANCED_FACE('',(#299637),#299671,.F.); +#299637 = FACE_BOUND('',#299638,.F.); +#299638 = EDGE_LOOP('',(#299639,#299649,#299657,#299665)); +#299639 = ORIENTED_EDGE('',*,*,#299640,.T.); +#299640 = EDGE_CURVE('',#299641,#299643,#299645,.T.); +#299641 = VERTEX_POINT('',#299642); +#299642 = CARTESIAN_POINT('',(145.671921,-153.5695,0.)); +#299643 = VERTEX_POINT('',#299644); +#299644 = CARTESIAN_POINT('',(145.671921,-153.5695,-3.5E-02)); +#299645 = LINE('',#299646,#299647); +#299646 = CARTESIAN_POINT('',(145.671921,-153.5695,0.)); +#299647 = VECTOR('',#299648,1.); +#299648 = DIRECTION('',(0.,0.,-1.)); +#299649 = ORIENTED_EDGE('',*,*,#299650,.T.); +#299650 = EDGE_CURVE('',#299643,#299651,#299653,.T.); +#299651 = VERTEX_POINT('',#299652); +#299652 = CARTESIAN_POINT('',(145.185557,-154.053147,-3.5E-02)); +#299653 = LINE('',#299654,#299655); +#299654 = CARTESIAN_POINT('',(145.671921,-153.5695,-3.5E-02)); +#299655 = VECTOR('',#299656,1.); +#299656 = DIRECTION('',(-0.709084605099,-0.705123409632,0.)); +#299657 = ORIENTED_EDGE('',*,*,#299658,.F.); +#299658 = EDGE_CURVE('',#299659,#299651,#299661,.T.); +#299659 = VERTEX_POINT('',#299660); +#299660 = CARTESIAN_POINT('',(145.185557,-154.053147,0.)); +#299661 = LINE('',#299662,#299663); +#299662 = CARTESIAN_POINT('',(145.185557,-154.053147,0.)); +#299663 = VECTOR('',#299664,1.); +#299664 = DIRECTION('',(0.,0.,-1.)); +#299665 = ORIENTED_EDGE('',*,*,#299666,.F.); +#299666 = EDGE_CURVE('',#299641,#299659,#299667,.T.); +#299667 = LINE('',#299668,#299669); +#299668 = CARTESIAN_POINT('',(145.671921,-153.5695,0.)); +#299669 = VECTOR('',#299670,1.); +#299670 = DIRECTION('',(-0.709084605099,-0.705123409632,0.)); +#299671 = PLANE('',#299672); +#299672 = AXIS2_PLACEMENT_3D('',#299673,#299674,#299675); +#299673 = CARTESIAN_POINT('',(145.671921,-153.5695,0.)); +#299674 = DIRECTION('',(-0.705123409632,0.709084605099,0.)); +#299675 = DIRECTION('',(-0.709084605099,-0.705123409632,0.)); +#299676 = ADVANCED_FACE('',(#299677),#299702,.F.); +#299677 = FACE_BOUND('',#299678,.F.); +#299678 = EDGE_LOOP('',(#299679,#299680,#299688,#299696)); +#299679 = ORIENTED_EDGE('',*,*,#299658,.T.); +#299680 = ORIENTED_EDGE('',*,*,#299681,.T.); +#299681 = EDGE_CURVE('',#299651,#299682,#299684,.T.); +#299682 = VERTEX_POINT('',#299683); +#299683 = CARTESIAN_POINT('',(145.149509,-154.068079,-3.5E-02)); +#299684 = LINE('',#299685,#299686); +#299685 = CARTESIAN_POINT('',(145.185557,-154.053147,-3.5E-02)); +#299686 = VECTOR('',#299687,1.); +#299687 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#299688 = ORIENTED_EDGE('',*,*,#299689,.F.); +#299689 = EDGE_CURVE('',#299690,#299682,#299692,.T.); +#299690 = VERTEX_POINT('',#299691); +#299691 = CARTESIAN_POINT('',(145.149509,-154.068079,0.)); +#299692 = LINE('',#299693,#299694); +#299693 = CARTESIAN_POINT('',(145.149509,-154.068079,0.)); +#299694 = VECTOR('',#299695,1.); +#299695 = DIRECTION('',(0.,0.,-1.)); +#299696 = ORIENTED_EDGE('',*,*,#299697,.F.); +#299697 = EDGE_CURVE('',#299659,#299690,#299698,.T.); +#299698 = LINE('',#299699,#299700); +#299699 = CARTESIAN_POINT('',(145.185557,-154.053147,0.)); +#299700 = VECTOR('',#299701,1.); +#299701 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#299702 = PLANE('',#299703); +#299703 = AXIS2_PLACEMENT_3D('',#299704,#299705,#299706); +#299704 = CARTESIAN_POINT('',(145.185557,-154.053147,0.)); +#299705 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#299706 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#299707 = ADVANCED_FACE('',(#299708),#299733,.F.); +#299708 = FACE_BOUND('',#299709,.F.); +#299709 = EDGE_LOOP('',(#299710,#299711,#299719,#299727)); +#299710 = ORIENTED_EDGE('',*,*,#299689,.T.); +#299711 = ORIENTED_EDGE('',*,*,#299712,.T.); +#299712 = EDGE_CURVE('',#299682,#299713,#299715,.T.); +#299713 = VERTEX_POINT('',#299714); +#299714 = CARTESIAN_POINT('',(142.1075,-154.068079,-3.5E-02)); +#299715 = LINE('',#299716,#299717); +#299716 = CARTESIAN_POINT('',(145.149509,-154.068079,-3.5E-02)); +#299717 = VECTOR('',#299718,1.); +#299718 = DIRECTION('',(-1.,0.,0.)); +#299719 = ORIENTED_EDGE('',*,*,#299720,.F.); +#299720 = EDGE_CURVE('',#299721,#299713,#299723,.T.); +#299721 = VERTEX_POINT('',#299722); +#299722 = CARTESIAN_POINT('',(142.1075,-154.068079,0.)); +#299723 = LINE('',#299724,#299725); +#299724 = CARTESIAN_POINT('',(142.1075,-154.068079,0.)); +#299725 = VECTOR('',#299726,1.); +#299726 = DIRECTION('',(0.,0.,-1.)); +#299727 = ORIENTED_EDGE('',*,*,#299728,.F.); +#299728 = EDGE_CURVE('',#299690,#299721,#299729,.T.); +#299729 = LINE('',#299730,#299731); +#299730 = CARTESIAN_POINT('',(145.149509,-154.068079,0.)); +#299731 = VECTOR('',#299732,1.); +#299732 = DIRECTION('',(-1.,0.,0.)); +#299733 = PLANE('',#299734); +#299734 = AXIS2_PLACEMENT_3D('',#299735,#299736,#299737); +#299735 = CARTESIAN_POINT('',(145.149509,-154.068079,0.)); +#299736 = DIRECTION('',(0.,1.,0.)); +#299737 = DIRECTION('',(-1.,0.,0.)); +#299738 = ADVANCED_FACE('',(#299739),#299764,.F.); +#299739 = FACE_BOUND('',#299740,.F.); +#299740 = EDGE_LOOP('',(#299741,#299742,#299750,#299758)); +#299741 = ORIENTED_EDGE('',*,*,#299720,.T.); +#299742 = ORIENTED_EDGE('',*,*,#299743,.T.); +#299743 = EDGE_CURVE('',#299713,#299744,#299746,.T.); +#299744 = VERTEX_POINT('',#299745); +#299745 = CARTESIAN_POINT('',(142.1075,-153.871741,-3.5E-02)); +#299746 = LINE('',#299747,#299748); +#299747 = CARTESIAN_POINT('',(142.1075,-154.068079,-3.5E-02)); +#299748 = VECTOR('',#299749,1.); +#299749 = DIRECTION('',(0.,1.,0.)); +#299750 = ORIENTED_EDGE('',*,*,#299751,.F.); +#299751 = EDGE_CURVE('',#299752,#299744,#299754,.T.); +#299752 = VERTEX_POINT('',#299753); +#299753 = CARTESIAN_POINT('',(142.1075,-153.871741,0.)); +#299754 = LINE('',#299755,#299756); +#299755 = CARTESIAN_POINT('',(142.1075,-153.871741,0.)); +#299756 = VECTOR('',#299757,1.); +#299757 = DIRECTION('',(0.,0.,-1.)); +#299758 = ORIENTED_EDGE('',*,*,#299759,.F.); +#299759 = EDGE_CURVE('',#299721,#299752,#299760,.T.); +#299760 = LINE('',#299761,#299762); +#299761 = CARTESIAN_POINT('',(142.1075,-154.068079,0.)); +#299762 = VECTOR('',#299763,1.); +#299763 = DIRECTION('',(0.,1.,0.)); +#299764 = PLANE('',#299765); +#299765 = AXIS2_PLACEMENT_3D('',#299766,#299767,#299768); +#299766 = CARTESIAN_POINT('',(142.1075,-154.068079,0.)); +#299767 = DIRECTION('',(1.,-0.,0.)); +#299768 = DIRECTION('',(0.,1.,0.)); +#299769 = ADVANCED_FACE('',(#299770),#299795,.F.); +#299770 = FACE_BOUND('',#299771,.F.); +#299771 = EDGE_LOOP('',(#299772,#299773,#299781,#299789)); +#299772 = ORIENTED_EDGE('',*,*,#299751,.T.); +#299773 = ORIENTED_EDGE('',*,*,#299774,.T.); +#299774 = EDGE_CURVE('',#299744,#299775,#299777,.T.); +#299775 = VERTEX_POINT('',#299776); +#299776 = CARTESIAN_POINT('',(145.088578,-153.87,-3.5E-02)); +#299777 = LINE('',#299778,#299779); +#299778 = CARTESIAN_POINT('',(142.1075,-153.871741,-3.5E-02)); +#299779 = VECTOR('',#299780,1.); +#299780 = DIRECTION('',(0.999999829462,5.840168231341E-04,0.)); +#299781 = ORIENTED_EDGE('',*,*,#299782,.F.); +#299782 = EDGE_CURVE('',#299783,#299775,#299785,.T.); +#299783 = VERTEX_POINT('',#299784); +#299784 = CARTESIAN_POINT('',(145.088578,-153.87,0.)); +#299785 = LINE('',#299786,#299787); +#299786 = CARTESIAN_POINT('',(145.088578,-153.87,0.)); +#299787 = VECTOR('',#299788,1.); +#299788 = DIRECTION('',(0.,0.,-1.)); +#299789 = ORIENTED_EDGE('',*,*,#299790,.F.); +#299790 = EDGE_CURVE('',#299752,#299783,#299791,.T.); +#299791 = LINE('',#299792,#299793); +#299792 = CARTESIAN_POINT('',(142.1075,-153.871741,0.)); +#299793 = VECTOR('',#299794,1.); +#299794 = DIRECTION('',(0.999999829462,5.840168231341E-04,0.)); +#299795 = PLANE('',#299796); +#299796 = AXIS2_PLACEMENT_3D('',#299797,#299798,#299799); +#299797 = CARTESIAN_POINT('',(142.1075,-153.871741,0.)); +#299798 = DIRECTION('',(5.840168231341E-04,-0.999999829462,0.)); +#299799 = DIRECTION('',(0.999999829462,5.840168231341E-04,0.)); +#299800 = ADVANCED_FACE('',(#299801),#299826,.F.); +#299801 = FACE_BOUND('',#299802,.F.); +#299802 = EDGE_LOOP('',(#299803,#299804,#299812,#299820)); +#299803 = ORIENTED_EDGE('',*,*,#299782,.T.); +#299804 = ORIENTED_EDGE('',*,*,#299805,.T.); +#299805 = EDGE_CURVE('',#299775,#299806,#299808,.T.); +#299806 = VERTEX_POINT('',#299807); +#299807 = CARTESIAN_POINT('',(145.530499,-153.428078,-3.5E-02)); +#299808 = LINE('',#299809,#299810); +#299809 = CARTESIAN_POINT('',(145.088578,-153.87,-3.5E-02)); +#299810 = VECTOR('',#299811,1.); +#299811 = DIRECTION('',(0.707105981149,0.707107581223,0.)); +#299812 = ORIENTED_EDGE('',*,*,#299813,.F.); +#299813 = EDGE_CURVE('',#299814,#299806,#299816,.T.); +#299814 = VERTEX_POINT('',#299815); +#299815 = CARTESIAN_POINT('',(145.530499,-153.428078,0.)); +#299816 = LINE('',#299817,#299818); +#299817 = CARTESIAN_POINT('',(145.530499,-153.428078,0.)); +#299818 = VECTOR('',#299819,1.); +#299819 = DIRECTION('',(0.,0.,-1.)); +#299820 = ORIENTED_EDGE('',*,*,#299821,.F.); +#299821 = EDGE_CURVE('',#299783,#299814,#299822,.T.); +#299822 = LINE('',#299823,#299824); +#299823 = CARTESIAN_POINT('',(145.088578,-153.87,0.)); +#299824 = VECTOR('',#299825,1.); +#299825 = DIRECTION('',(0.707105981149,0.707107581223,0.)); +#299826 = PLANE('',#299827); +#299827 = AXIS2_PLACEMENT_3D('',#299828,#299829,#299830); +#299828 = CARTESIAN_POINT('',(145.088578,-153.87,0.)); +#299829 = DIRECTION('',(0.707107581223,-0.707105981149,0.)); +#299830 = DIRECTION('',(0.707105981149,0.707107581223,0.)); +#299831 = ADVANCED_FACE('',(#299832),#299857,.F.); +#299832 = FACE_BOUND('',#299833,.F.); +#299833 = EDGE_LOOP('',(#299834,#299835,#299843,#299851)); +#299834 = ORIENTED_EDGE('',*,*,#299813,.T.); +#299835 = ORIENTED_EDGE('',*,*,#299836,.T.); +#299836 = EDGE_CURVE('',#299806,#299837,#299839,.T.); +#299837 = VERTEX_POINT('',#299838); +#299838 = CARTESIAN_POINT('',(145.522836,-153.414805,-3.5E-02)); +#299839 = LINE('',#299840,#299841); +#299840 = CARTESIAN_POINT('',(145.530499,-153.428078,-3.5E-02)); +#299841 = VECTOR('',#299842,1.); +#299842 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#299843 = ORIENTED_EDGE('',*,*,#299844,.F.); +#299844 = EDGE_CURVE('',#299845,#299837,#299847,.T.); +#299845 = VERTEX_POINT('',#299846); +#299846 = CARTESIAN_POINT('',(145.522836,-153.414805,0.)); +#299847 = LINE('',#299848,#299849); +#299848 = CARTESIAN_POINT('',(145.522836,-153.414805,0.)); +#299849 = VECTOR('',#299850,1.); +#299850 = DIRECTION('',(0.,0.,-1.)); +#299851 = ORIENTED_EDGE('',*,*,#299852,.F.); +#299852 = EDGE_CURVE('',#299814,#299845,#299853,.T.); +#299853 = LINE('',#299854,#299855); +#299854 = CARTESIAN_POINT('',(145.530499,-153.428078,0.)); +#299855 = VECTOR('',#299856,1.); +#299856 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#299857 = PLANE('',#299858); +#299858 = AXIS2_PLACEMENT_3D('',#299859,#299860,#299861); +#299859 = CARTESIAN_POINT('',(145.530499,-153.428078,0.)); +#299860 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#299861 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#299862 = ADVANCED_FACE('',(#299863),#299890,.T.); +#299863 = FACE_BOUND('',#299864,.F.); +#299864 = EDGE_LOOP('',(#299865,#299866,#299875,#299883)); +#299865 = ORIENTED_EDGE('',*,*,#299844,.T.); +#299866 = ORIENTED_EDGE('',*,*,#299867,.T.); +#299867 = EDGE_CURVE('',#299837,#299868,#299870,.T.); +#299868 = VERTEX_POINT('',#299869); +#299869 = CARTESIAN_POINT('',(145.685195,-153.577164,-3.5E-02)); +#299870 = CIRCLE('',#299871,0.300000118202); +#299871 = AXIS2_PLACEMENT_3D('',#299872,#299873,#299874); +#299872 = CARTESIAN_POINT('',(145.8,-153.3,-3.5E-02)); +#299873 = DIRECTION('',(0.,0.,-1.)); +#299874 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#299875 = ORIENTED_EDGE('',*,*,#299876,.F.); +#299876 = EDGE_CURVE('',#299877,#299868,#299879,.T.); +#299877 = VERTEX_POINT('',#299878); +#299878 = CARTESIAN_POINT('',(145.685195,-153.577164,0.)); +#299879 = LINE('',#299880,#299881); +#299880 = CARTESIAN_POINT('',(145.685195,-153.577164,0.)); +#299881 = VECTOR('',#299882,1.); +#299882 = DIRECTION('',(0.,0.,-1.)); +#299883 = ORIENTED_EDGE('',*,*,#299884,.F.); +#299884 = EDGE_CURVE('',#299845,#299877,#299885,.T.); +#299885 = CIRCLE('',#299886,0.300000118202); +#299886 = AXIS2_PLACEMENT_3D('',#299887,#299888,#299889); +#299887 = CARTESIAN_POINT('',(145.8,-153.3,0.)); +#299888 = DIRECTION('',(0.,0.,-1.)); +#299889 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#299890 = CYLINDRICAL_SURFACE('',#299891,0.300000118202); +#299891 = AXIS2_PLACEMENT_3D('',#299892,#299893,#299894); +#299892 = CARTESIAN_POINT('',(145.8,-153.3,0.)); +#299893 = DIRECTION('',(-0.,-0.,1.)); +#299894 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#299895 = ADVANCED_FACE('',(#299896),#299912,.F.); +#299896 = FACE_BOUND('',#299897,.F.); +#299897 = EDGE_LOOP('',(#299898,#299899,#299905,#299906)); +#299898 = ORIENTED_EDGE('',*,*,#299876,.T.); +#299899 = ORIENTED_EDGE('',*,*,#299900,.T.); +#299900 = EDGE_CURVE('',#299868,#299643,#299901,.T.); +#299901 = LINE('',#299902,#299903); +#299902 = CARTESIAN_POINT('',(145.685195,-153.577164,-3.5E-02)); +#299903 = VECTOR('',#299904,1.); +#299904 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#299905 = ORIENTED_EDGE('',*,*,#299640,.F.); +#299906 = ORIENTED_EDGE('',*,*,#299907,.F.); +#299907 = EDGE_CURVE('',#299877,#299641,#299908,.T.); +#299908 = LINE('',#299909,#299910); +#299909 = CARTESIAN_POINT('',(145.685195,-153.577164,0.)); +#299910 = VECTOR('',#299911,1.); +#299911 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#299912 = PLANE('',#299913); +#299913 = AXIS2_PLACEMENT_3D('',#299914,#299915,#299916); +#299914 = CARTESIAN_POINT('',(145.685195,-153.577164,0.)); +#299915 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#299916 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#299917 = ADVANCED_FACE('',(#299918),#299945,.F.); +#299918 = FACE_BOUND('',#299919,.F.); +#299919 = EDGE_LOOP('',(#299920,#299930,#299937,#299938)); +#299920 = ORIENTED_EDGE('',*,*,#299921,.T.); +#299921 = EDGE_CURVE('',#299922,#299924,#299926,.T.); +#299922 = VERTEX_POINT('',#299923); +#299923 = CARTESIAN_POINT('',(145.937255,-153.3,0.)); +#299924 = VERTEX_POINT('',#299925); +#299925 = CARTESIAN_POINT('',(145.937255,-153.3,-3.5E-02)); +#299926 = LINE('',#299927,#299928); +#299927 = CARTESIAN_POINT('',(145.937255,-153.3,0.)); +#299928 = VECTOR('',#299929,1.); +#299929 = DIRECTION('',(0.,0.,-1.)); +#299930 = ORIENTED_EDGE('',*,*,#299931,.T.); +#299931 = EDGE_CURVE('',#299924,#299924,#299932,.T.); +#299932 = CIRCLE('',#299933,0.137255); +#299933 = AXIS2_PLACEMENT_3D('',#299934,#299935,#299936); +#299934 = CARTESIAN_POINT('',(145.8,-153.3,-3.5E-02)); +#299935 = DIRECTION('',(0.,0.,1.)); +#299936 = DIRECTION('',(1.,0.,-0.)); +#299937 = ORIENTED_EDGE('',*,*,#299921,.F.); +#299938 = ORIENTED_EDGE('',*,*,#299939,.F.); +#299939 = EDGE_CURVE('',#299922,#299922,#299940,.T.); +#299940 = CIRCLE('',#299941,0.137255); +#299941 = AXIS2_PLACEMENT_3D('',#299942,#299943,#299944); +#299942 = CARTESIAN_POINT('',(145.8,-153.3,0.)); +#299943 = DIRECTION('',(0.,0.,1.)); +#299944 = DIRECTION('',(1.,0.,-0.)); +#299945 = CYLINDRICAL_SURFACE('',#299946,0.137255); +#299946 = AXIS2_PLACEMENT_3D('',#299947,#299948,#299949); +#299947 = CARTESIAN_POINT('',(145.8,-153.3,0.)); +#299948 = DIRECTION('',(0.,0.,1.)); +#299949 = DIRECTION('',(1.,0.,-0.)); +#299950 = ADVANCED_FACE('',(#299951,#299962),#299965,.F.); +#299951 = FACE_BOUND('',#299952,.F.); +#299952 = EDGE_LOOP('',(#299953,#299954,#299955,#299956,#299957,#299958, + #299959,#299960,#299961)); +#299953 = ORIENTED_EDGE('',*,*,#299666,.T.); +#299954 = ORIENTED_EDGE('',*,*,#299697,.T.); +#299955 = ORIENTED_EDGE('',*,*,#299728,.T.); +#299956 = ORIENTED_EDGE('',*,*,#299759,.T.); +#299957 = ORIENTED_EDGE('',*,*,#299790,.T.); +#299958 = ORIENTED_EDGE('',*,*,#299821,.T.); +#299959 = ORIENTED_EDGE('',*,*,#299852,.T.); +#299960 = ORIENTED_EDGE('',*,*,#299884,.T.); +#299961 = ORIENTED_EDGE('',*,*,#299907,.T.); +#299962 = FACE_BOUND('',#299963,.F.); +#299963 = EDGE_LOOP('',(#299964)); +#299964 = ORIENTED_EDGE('',*,*,#299939,.T.); +#299965 = PLANE('',#299966); +#299966 = AXIS2_PLACEMENT_3D('',#299967,#299968,#299969); +#299967 = CARTESIAN_POINT('',(0.,0.,0.)); +#299968 = DIRECTION('',(-0.,-0.,-1.)); +#299969 = DIRECTION('',(-1.,0.,0.)); +#299970 = ADVANCED_FACE('',(#299971,#299982),#299985,.T.); +#299971 = FACE_BOUND('',#299972,.T.); +#299972 = EDGE_LOOP('',(#299973,#299974,#299975,#299976,#299977,#299978, + #299979,#299980,#299981)); +#299973 = ORIENTED_EDGE('',*,*,#299650,.T.); +#299974 = ORIENTED_EDGE('',*,*,#299681,.T.); +#299975 = ORIENTED_EDGE('',*,*,#299712,.T.); +#299976 = ORIENTED_EDGE('',*,*,#299743,.T.); +#299977 = ORIENTED_EDGE('',*,*,#299774,.T.); +#299978 = ORIENTED_EDGE('',*,*,#299805,.T.); +#299979 = ORIENTED_EDGE('',*,*,#299836,.T.); +#299980 = ORIENTED_EDGE('',*,*,#299867,.T.); +#299981 = ORIENTED_EDGE('',*,*,#299900,.T.); +#299982 = FACE_BOUND('',#299983,.T.); +#299983 = EDGE_LOOP('',(#299984)); +#299984 = ORIENTED_EDGE('',*,*,#299931,.T.); +#299985 = PLANE('',#299986); +#299986 = AXIS2_PLACEMENT_3D('',#299987,#299988,#299989); +#299987 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#299988 = DIRECTION('',(-0.,-0.,-1.)); +#299989 = DIRECTION('',(-1.,0.,0.)); +#299990 = MANIFOLD_SOLID_BREP('',#299991); +#299991 = CLOSED_SHELL('',(#299992,#300025,#300058,#300070)); +#299992 = ADVANCED_FACE('',(#299993),#300020,.T.); +#299993 = FACE_BOUND('',#299994,.T.); +#299994 = EDGE_LOOP('',(#299995,#300005,#300012,#300013)); +#299995 = ORIENTED_EDGE('',*,*,#299996,.T.); +#299996 = EDGE_CURVE('',#299997,#299999,#300001,.T.); +#299997 = VERTEX_POINT('',#299998); +#299998 = CARTESIAN_POINT('',(126.3,-153.,0.)); +#299999 = VERTEX_POINT('',#300000); +#300000 = CARTESIAN_POINT('',(126.3,-153.,-3.5E-02)); +#300001 = LINE('',#300002,#300003); +#300002 = CARTESIAN_POINT('',(126.3,-153.,0.)); +#300003 = VECTOR('',#300004,1.); +#300004 = DIRECTION('',(0.,0.,-1.)); +#300005 = ORIENTED_EDGE('',*,*,#300006,.T.); +#300006 = EDGE_CURVE('',#299999,#299999,#300007,.T.); +#300007 = CIRCLE('',#300008,0.3); +#300008 = AXIS2_PLACEMENT_3D('',#300009,#300010,#300011); +#300009 = CARTESIAN_POINT('',(126.,-153.,-3.5E-02)); +#300010 = DIRECTION('',(0.,0.,1.)); +#300011 = DIRECTION('',(1.,0.,-0.)); +#300012 = ORIENTED_EDGE('',*,*,#299996,.F.); +#300013 = ORIENTED_EDGE('',*,*,#300014,.F.); +#300014 = EDGE_CURVE('',#299997,#299997,#300015,.T.); +#300015 = CIRCLE('',#300016,0.3); +#300016 = AXIS2_PLACEMENT_3D('',#300017,#300018,#300019); +#300017 = CARTESIAN_POINT('',(126.,-153.,0.)); +#300018 = DIRECTION('',(0.,0.,1.)); +#300019 = DIRECTION('',(1.,0.,-0.)); +#300020 = CYLINDRICAL_SURFACE('',#300021,0.3); +#300021 = AXIS2_PLACEMENT_3D('',#300022,#300023,#300024); +#300022 = CARTESIAN_POINT('',(126.,-153.,0.)); +#300023 = DIRECTION('',(0.,0.,1.)); +#300024 = DIRECTION('',(1.,0.,-0.)); +#300025 = ADVANCED_FACE('',(#300026),#300053,.F.); +#300026 = FACE_BOUND('',#300027,.F.); +#300027 = EDGE_LOOP('',(#300028,#300038,#300045,#300046)); +#300028 = ORIENTED_EDGE('',*,*,#300029,.T.); +#300029 = EDGE_CURVE('',#300030,#300032,#300034,.T.); +#300030 = VERTEX_POINT('',#300031); +#300031 = CARTESIAN_POINT('',(126.137255,-153.,0.)); +#300032 = VERTEX_POINT('',#300033); +#300033 = CARTESIAN_POINT('',(126.137255,-153.,-3.5E-02)); +#300034 = LINE('',#300035,#300036); +#300035 = CARTESIAN_POINT('',(126.137255,-153.,0.)); +#300036 = VECTOR('',#300037,1.); +#300037 = DIRECTION('',(0.,0.,-1.)); +#300038 = ORIENTED_EDGE('',*,*,#300039,.T.); +#300039 = EDGE_CURVE('',#300032,#300032,#300040,.T.); +#300040 = CIRCLE('',#300041,0.137255); +#300041 = AXIS2_PLACEMENT_3D('',#300042,#300043,#300044); +#300042 = CARTESIAN_POINT('',(126.,-153.,-3.5E-02)); +#300043 = DIRECTION('',(0.,0.,1.)); +#300044 = DIRECTION('',(1.,0.,-0.)); +#300045 = ORIENTED_EDGE('',*,*,#300029,.F.); +#300046 = ORIENTED_EDGE('',*,*,#300047,.F.); +#300047 = EDGE_CURVE('',#300030,#300030,#300048,.T.); +#300048 = CIRCLE('',#300049,0.137255); +#300049 = AXIS2_PLACEMENT_3D('',#300050,#300051,#300052); +#300050 = CARTESIAN_POINT('',(126.,-153.,0.)); +#300051 = DIRECTION('',(0.,0.,1.)); +#300052 = DIRECTION('',(1.,0.,-0.)); +#300053 = CYLINDRICAL_SURFACE('',#300054,0.137255); +#300054 = AXIS2_PLACEMENT_3D('',#300055,#300056,#300057); +#300055 = CARTESIAN_POINT('',(126.,-153.,0.)); +#300056 = DIRECTION('',(0.,0.,1.)); +#300057 = DIRECTION('',(1.,0.,-0.)); +#300058 = ADVANCED_FACE('',(#300059,#300062),#300065,.F.); +#300059 = FACE_BOUND('',#300060,.T.); +#300060 = EDGE_LOOP('',(#300061)); +#300061 = ORIENTED_EDGE('',*,*,#300014,.T.); +#300062 = FACE_BOUND('',#300063,.F.); +#300063 = EDGE_LOOP('',(#300064)); +#300064 = ORIENTED_EDGE('',*,*,#300047,.T.); +#300065 = PLANE('',#300066); +#300066 = AXIS2_PLACEMENT_3D('',#300067,#300068,#300069); +#300067 = CARTESIAN_POINT('',(0.,0.,0.)); +#300068 = DIRECTION('',(-0.,-0.,-1.)); +#300069 = DIRECTION('',(-1.,0.,0.)); +#300070 = ADVANCED_FACE('',(#300071,#300074),#300077,.T.); +#300071 = FACE_BOUND('',#300072,.F.); +#300072 = EDGE_LOOP('',(#300073)); +#300073 = ORIENTED_EDGE('',*,*,#300006,.T.); +#300074 = FACE_BOUND('',#300075,.T.); +#300075 = EDGE_LOOP('',(#300076)); +#300076 = ORIENTED_EDGE('',*,*,#300039,.T.); +#300077 = PLANE('',#300078); +#300078 = AXIS2_PLACEMENT_3D('',#300079,#300080,#300081); +#300079 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#300080 = DIRECTION('',(-0.,-0.,-1.)); +#300081 = DIRECTION('',(-1.,0.,0.)); +#300082 = MANIFOLD_SOLID_BREP('',#300083); +#300083 = CLOSED_SHELL('',(#300084,#300117,#300150,#300162)); +#300084 = ADVANCED_FACE('',(#300085),#300112,.T.); +#300085 = FACE_BOUND('',#300086,.T.); +#300086 = EDGE_LOOP('',(#300087,#300097,#300104,#300105)); +#300087 = ORIENTED_EDGE('',*,*,#300088,.T.); +#300088 = EDGE_CURVE('',#300089,#300091,#300093,.T.); +#300089 = VERTEX_POINT('',#300090); +#300090 = CARTESIAN_POINT('',(150.1,-150.8,0.)); +#300091 = VERTEX_POINT('',#300092); +#300092 = CARTESIAN_POINT('',(150.1,-150.8,-3.5E-02)); +#300093 = LINE('',#300094,#300095); +#300094 = CARTESIAN_POINT('',(150.1,-150.8,0.)); +#300095 = VECTOR('',#300096,1.); +#300096 = DIRECTION('',(0.,0.,-1.)); +#300097 = ORIENTED_EDGE('',*,*,#300098,.T.); +#300098 = EDGE_CURVE('',#300091,#300091,#300099,.T.); +#300099 = CIRCLE('',#300100,0.3); +#300100 = AXIS2_PLACEMENT_3D('',#300101,#300102,#300103); +#300101 = CARTESIAN_POINT('',(149.8,-150.8,-3.5E-02)); +#300102 = DIRECTION('',(0.,0.,1.)); +#300103 = DIRECTION('',(1.,0.,-0.)); +#300104 = ORIENTED_EDGE('',*,*,#300088,.F.); +#300105 = ORIENTED_EDGE('',*,*,#300106,.F.); +#300106 = EDGE_CURVE('',#300089,#300089,#300107,.T.); +#300107 = CIRCLE('',#300108,0.3); +#300108 = AXIS2_PLACEMENT_3D('',#300109,#300110,#300111); +#300109 = CARTESIAN_POINT('',(149.8,-150.8,0.)); +#300110 = DIRECTION('',(0.,0.,1.)); +#300111 = DIRECTION('',(1.,0.,-0.)); +#300112 = CYLINDRICAL_SURFACE('',#300113,0.3); +#300113 = AXIS2_PLACEMENT_3D('',#300114,#300115,#300116); +#300114 = CARTESIAN_POINT('',(149.8,-150.8,0.)); +#300115 = DIRECTION('',(0.,0.,1.)); +#300116 = DIRECTION('',(1.,0.,-0.)); +#300117 = ADVANCED_FACE('',(#300118),#300145,.F.); +#300118 = FACE_BOUND('',#300119,.F.); +#300119 = EDGE_LOOP('',(#300120,#300130,#300137,#300138)); +#300120 = ORIENTED_EDGE('',*,*,#300121,.T.); +#300121 = EDGE_CURVE('',#300122,#300124,#300126,.T.); +#300122 = VERTEX_POINT('',#300123); +#300123 = CARTESIAN_POINT('',(149.937255,-150.8,0.)); +#300124 = VERTEX_POINT('',#300125); +#300125 = CARTESIAN_POINT('',(149.937255,-150.8,-3.5E-02)); +#300126 = LINE('',#300127,#300128); +#300127 = CARTESIAN_POINT('',(149.937255,-150.8,0.)); +#300128 = VECTOR('',#300129,1.); +#300129 = DIRECTION('',(0.,0.,-1.)); +#300130 = ORIENTED_EDGE('',*,*,#300131,.T.); +#300131 = EDGE_CURVE('',#300124,#300124,#300132,.T.); +#300132 = CIRCLE('',#300133,0.137255); +#300133 = AXIS2_PLACEMENT_3D('',#300134,#300135,#300136); +#300134 = CARTESIAN_POINT('',(149.8,-150.8,-3.5E-02)); +#300135 = DIRECTION('',(0.,0.,1.)); +#300136 = DIRECTION('',(1.,0.,-0.)); +#300137 = ORIENTED_EDGE('',*,*,#300121,.F.); +#300138 = ORIENTED_EDGE('',*,*,#300139,.F.); +#300139 = EDGE_CURVE('',#300122,#300122,#300140,.T.); +#300140 = CIRCLE('',#300141,0.137255); +#300141 = AXIS2_PLACEMENT_3D('',#300142,#300143,#300144); +#300142 = CARTESIAN_POINT('',(149.8,-150.8,0.)); +#300143 = DIRECTION('',(0.,0.,1.)); +#300144 = DIRECTION('',(1.,0.,-0.)); +#300145 = CYLINDRICAL_SURFACE('',#300146,0.137255); +#300146 = AXIS2_PLACEMENT_3D('',#300147,#300148,#300149); +#300147 = CARTESIAN_POINT('',(149.8,-150.8,0.)); +#300148 = DIRECTION('',(0.,0.,1.)); +#300149 = DIRECTION('',(1.,0.,-0.)); +#300150 = ADVANCED_FACE('',(#300151,#300154),#300157,.F.); +#300151 = FACE_BOUND('',#300152,.T.); +#300152 = EDGE_LOOP('',(#300153)); +#300153 = ORIENTED_EDGE('',*,*,#300106,.T.); +#300154 = FACE_BOUND('',#300155,.F.); +#300155 = EDGE_LOOP('',(#300156)); +#300156 = ORIENTED_EDGE('',*,*,#300139,.T.); +#300157 = PLANE('',#300158); +#300158 = AXIS2_PLACEMENT_3D('',#300159,#300160,#300161); +#300159 = CARTESIAN_POINT('',(0.,0.,0.)); +#300160 = DIRECTION('',(-0.,-0.,-1.)); +#300161 = DIRECTION('',(-1.,0.,0.)); +#300162 = ADVANCED_FACE('',(#300163,#300166),#300169,.T.); +#300163 = FACE_BOUND('',#300164,.F.); +#300164 = EDGE_LOOP('',(#300165)); +#300165 = ORIENTED_EDGE('',*,*,#300098,.T.); +#300166 = FACE_BOUND('',#300167,.T.); +#300167 = EDGE_LOOP('',(#300168)); +#300168 = ORIENTED_EDGE('',*,*,#300131,.T.); +#300169 = PLANE('',#300170); +#300170 = AXIS2_PLACEMENT_3D('',#300171,#300172,#300173); +#300171 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#300172 = DIRECTION('',(-0.,-0.,-1.)); +#300173 = DIRECTION('',(-1.,0.,0.)); +#300174 = MANIFOLD_SOLID_BREP('',#300175); +#300175 = CLOSED_SHELL('',(#300176,#300209,#300242,#300254)); +#300176 = ADVANCED_FACE('',(#300177),#300204,.T.); +#300177 = FACE_BOUND('',#300178,.T.); +#300178 = EDGE_LOOP('',(#300179,#300189,#300196,#300197)); +#300179 = ORIENTED_EDGE('',*,*,#300180,.T.); +#300180 = EDGE_CURVE('',#300181,#300183,#300185,.T.); +#300181 = VERTEX_POINT('',#300182); +#300182 = CARTESIAN_POINT('',(124.3,-129.,0.)); +#300183 = VERTEX_POINT('',#300184); +#300184 = CARTESIAN_POINT('',(124.3,-129.,-3.5E-02)); +#300185 = LINE('',#300186,#300187); +#300186 = CARTESIAN_POINT('',(124.3,-129.,0.)); +#300187 = VECTOR('',#300188,1.); +#300188 = DIRECTION('',(0.,0.,-1.)); +#300189 = ORIENTED_EDGE('',*,*,#300190,.T.); +#300190 = EDGE_CURVE('',#300183,#300183,#300191,.T.); +#300191 = CIRCLE('',#300192,0.3); +#300192 = AXIS2_PLACEMENT_3D('',#300193,#300194,#300195); +#300193 = CARTESIAN_POINT('',(124.,-129.,-3.5E-02)); +#300194 = DIRECTION('',(0.,0.,1.)); +#300195 = DIRECTION('',(1.,0.,-0.)); +#300196 = ORIENTED_EDGE('',*,*,#300180,.F.); +#300197 = ORIENTED_EDGE('',*,*,#300198,.F.); +#300198 = EDGE_CURVE('',#300181,#300181,#300199,.T.); +#300199 = CIRCLE('',#300200,0.3); +#300200 = AXIS2_PLACEMENT_3D('',#300201,#300202,#300203); +#300201 = CARTESIAN_POINT('',(124.,-129.,0.)); +#300202 = DIRECTION('',(0.,0.,1.)); +#300203 = DIRECTION('',(1.,0.,-0.)); +#300204 = CYLINDRICAL_SURFACE('',#300205,0.3); +#300205 = AXIS2_PLACEMENT_3D('',#300206,#300207,#300208); +#300206 = CARTESIAN_POINT('',(124.,-129.,0.)); +#300207 = DIRECTION('',(0.,0.,1.)); +#300208 = DIRECTION('',(1.,0.,-0.)); +#300209 = ADVANCED_FACE('',(#300210),#300237,.F.); +#300210 = FACE_BOUND('',#300211,.F.); +#300211 = EDGE_LOOP('',(#300212,#300222,#300229,#300230)); +#300212 = ORIENTED_EDGE('',*,*,#300213,.T.); +#300213 = EDGE_CURVE('',#300214,#300216,#300218,.T.); +#300214 = VERTEX_POINT('',#300215); +#300215 = CARTESIAN_POINT('',(124.137255,-129.,0.)); +#300216 = VERTEX_POINT('',#300217); +#300217 = CARTESIAN_POINT('',(124.137255,-129.,-3.5E-02)); +#300218 = LINE('',#300219,#300220); +#300219 = CARTESIAN_POINT('',(124.137255,-129.,0.)); +#300220 = VECTOR('',#300221,1.); +#300221 = DIRECTION('',(0.,0.,-1.)); +#300222 = ORIENTED_EDGE('',*,*,#300223,.T.); +#300223 = EDGE_CURVE('',#300216,#300216,#300224,.T.); +#300224 = CIRCLE('',#300225,0.137255); +#300225 = AXIS2_PLACEMENT_3D('',#300226,#300227,#300228); +#300226 = CARTESIAN_POINT('',(124.,-129.,-3.5E-02)); +#300227 = DIRECTION('',(0.,0.,1.)); +#300228 = DIRECTION('',(1.,0.,-0.)); +#300229 = ORIENTED_EDGE('',*,*,#300213,.F.); +#300230 = ORIENTED_EDGE('',*,*,#300231,.F.); +#300231 = EDGE_CURVE('',#300214,#300214,#300232,.T.); +#300232 = CIRCLE('',#300233,0.137255); +#300233 = AXIS2_PLACEMENT_3D('',#300234,#300235,#300236); +#300234 = CARTESIAN_POINT('',(124.,-129.,0.)); +#300235 = DIRECTION('',(0.,0.,1.)); +#300236 = DIRECTION('',(1.,0.,-0.)); +#300237 = CYLINDRICAL_SURFACE('',#300238,0.137255); +#300238 = AXIS2_PLACEMENT_3D('',#300239,#300240,#300241); +#300239 = CARTESIAN_POINT('',(124.,-129.,0.)); +#300240 = DIRECTION('',(0.,0.,1.)); +#300241 = DIRECTION('',(1.,0.,-0.)); +#300242 = ADVANCED_FACE('',(#300243,#300246),#300249,.F.); +#300243 = FACE_BOUND('',#300244,.T.); +#300244 = EDGE_LOOP('',(#300245)); +#300245 = ORIENTED_EDGE('',*,*,#300198,.T.); +#300246 = FACE_BOUND('',#300247,.F.); +#300247 = EDGE_LOOP('',(#300248)); +#300248 = ORIENTED_EDGE('',*,*,#300231,.T.); +#300249 = PLANE('',#300250); +#300250 = AXIS2_PLACEMENT_3D('',#300251,#300252,#300253); +#300251 = CARTESIAN_POINT('',(0.,0.,0.)); +#300252 = DIRECTION('',(-0.,-0.,-1.)); +#300253 = DIRECTION('',(-1.,0.,0.)); +#300254 = ADVANCED_FACE('',(#300255,#300258),#300261,.T.); +#300255 = FACE_BOUND('',#300256,.F.); +#300256 = EDGE_LOOP('',(#300257)); +#300257 = ORIENTED_EDGE('',*,*,#300190,.T.); +#300258 = FACE_BOUND('',#300259,.T.); +#300259 = EDGE_LOOP('',(#300260)); +#300260 = ORIENTED_EDGE('',*,*,#300223,.T.); +#300261 = PLANE('',#300262); +#300262 = AXIS2_PLACEMENT_3D('',#300263,#300264,#300265); +#300263 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#300264 = DIRECTION('',(-0.,-0.,-1.)); +#300265 = DIRECTION('',(-1.,0.,0.)); +#300266 = MANIFOLD_SOLID_BREP('',#300267); +#300267 = CLOSED_SHELL('',(#300268,#300308,#300341,#300372,#300403, + #300434,#300465,#300496,#300529,#300560,#300591,#300622,#300655, + #300677,#300710,#300734)); +#300268 = ADVANCED_FACE('',(#300269),#300303,.F.); +#300269 = FACE_BOUND('',#300270,.F.); +#300270 = EDGE_LOOP('',(#300271,#300281,#300289,#300297)); +#300271 = ORIENTED_EDGE('',*,*,#300272,.T.); +#300272 = EDGE_CURVE('',#300273,#300275,#300277,.T.); +#300273 = VERTEX_POINT('',#300274); +#300274 = CARTESIAN_POINT('',(145.28381,-123.41,0.)); +#300275 = VERTEX_POINT('',#300276); +#300276 = CARTESIAN_POINT('',(145.28381,-123.41,-3.5E-02)); +#300277 = LINE('',#300278,#300279); +#300278 = CARTESIAN_POINT('',(145.28381,-123.41,0.)); +#300279 = VECTOR('',#300280,1.); +#300280 = DIRECTION('',(0.,0.,-1.)); +#300281 = ORIENTED_EDGE('',*,*,#300282,.T.); +#300282 = EDGE_CURVE('',#300275,#300283,#300285,.T.); +#300283 = VERTEX_POINT('',#300284); +#300284 = CARTESIAN_POINT('',(146.019509,-123.411921,-3.5E-02)); +#300285 = LINE('',#300286,#300287); +#300286 = CARTESIAN_POINT('',(145.28381,-123.41,-3.5E-02)); +#300287 = VECTOR('',#300288,1.); +#300288 = DIRECTION('',(0.999996591038,-2.611113310462E-03,0.)); +#300289 = ORIENTED_EDGE('',*,*,#300290,.F.); +#300290 = EDGE_CURVE('',#300291,#300283,#300293,.T.); +#300291 = VERTEX_POINT('',#300292); +#300292 = CARTESIAN_POINT('',(146.019509,-123.411921,0.)); +#300293 = LINE('',#300294,#300295); +#300294 = CARTESIAN_POINT('',(146.019509,-123.411921,0.)); +#300295 = VECTOR('',#300296,1.); +#300296 = DIRECTION('',(0.,0.,-1.)); +#300297 = ORIENTED_EDGE('',*,*,#300298,.F.); +#300298 = EDGE_CURVE('',#300273,#300291,#300299,.T.); +#300299 = LINE('',#300300,#300301); +#300300 = CARTESIAN_POINT('',(145.28381,-123.41,0.)); +#300301 = VECTOR('',#300302,1.); +#300302 = DIRECTION('',(0.999996591038,-2.611113310462E-03,0.)); +#300303 = PLANE('',#300304); +#300304 = AXIS2_PLACEMENT_3D('',#300305,#300306,#300307); +#300305 = CARTESIAN_POINT('',(145.28381,-123.41,0.)); +#300306 = DIRECTION('',(-2.611113310462E-03,-0.999996591038,-0.)); +#300307 = DIRECTION('',(0.999996591038,-2.611113310462E-03,0.)); +#300308 = ADVANCED_FACE('',(#300309),#300336,.T.); +#300309 = FACE_BOUND('',#300310,.F.); +#300310 = EDGE_LOOP('',(#300311,#300312,#300321,#300329)); +#300311 = ORIENTED_EDGE('',*,*,#300290,.T.); +#300312 = ORIENTED_EDGE('',*,*,#300313,.T.); +#300313 = EDGE_CURVE('',#300283,#300314,#300316,.T.); +#300314 = VERTEX_POINT('',#300315); +#300315 = CARTESIAN_POINT('',(146.019509,-123.608079,-3.5E-02)); +#300316 = CIRCLE('',#300317,0.100000456609); +#300317 = AXIS2_PLACEMENT_3D('',#300318,#300319,#300320); +#300318 = CARTESIAN_POINT('',(146.,-123.51,-3.5E-02)); +#300319 = DIRECTION('',(0.,0.,-1.)); +#300320 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#300321 = ORIENTED_EDGE('',*,*,#300322,.F.); +#300322 = EDGE_CURVE('',#300323,#300314,#300325,.T.); +#300323 = VERTEX_POINT('',#300324); +#300324 = CARTESIAN_POINT('',(146.019509,-123.608079,0.)); +#300325 = LINE('',#300326,#300327); +#300326 = CARTESIAN_POINT('',(146.019509,-123.608079,0.)); +#300327 = VECTOR('',#300328,1.); +#300328 = DIRECTION('',(0.,0.,-1.)); +#300329 = ORIENTED_EDGE('',*,*,#300330,.F.); +#300330 = EDGE_CURVE('',#300291,#300323,#300331,.T.); +#300331 = CIRCLE('',#300332,0.100000456609); +#300332 = AXIS2_PLACEMENT_3D('',#300333,#300334,#300335); +#300333 = CARTESIAN_POINT('',(146.,-123.51,0.)); +#300334 = DIRECTION('',(0.,0.,-1.)); +#300335 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#300336 = CYLINDRICAL_SURFACE('',#300337,0.100000456609); +#300337 = AXIS2_PLACEMENT_3D('',#300338,#300339,#300340); +#300338 = CARTESIAN_POINT('',(146.,-123.51,0.)); +#300339 = DIRECTION('',(-0.,-0.,1.)); +#300340 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#300341 = ADVANCED_FACE('',(#300342),#300367,.F.); +#300342 = FACE_BOUND('',#300343,.F.); +#300343 = EDGE_LOOP('',(#300344,#300345,#300353,#300361)); +#300344 = ORIENTED_EDGE('',*,*,#300322,.T.); +#300345 = ORIENTED_EDGE('',*,*,#300346,.T.); +#300346 = EDGE_CURVE('',#300314,#300347,#300349,.T.); +#300347 = VERTEX_POINT('',#300348); +#300348 = CARTESIAN_POINT('',(145.278451,-123.61,-3.5E-02)); +#300349 = LINE('',#300350,#300351); +#300350 = CARTESIAN_POINT('',(146.019509,-123.608079,-3.5E-02)); +#300351 = VECTOR('',#300352,1.); +#300352 = DIRECTION('',(-0.999996640163,-2.59223103421E-03,0.)); +#300353 = ORIENTED_EDGE('',*,*,#300354,.F.); +#300354 = EDGE_CURVE('',#300355,#300347,#300357,.T.); +#300355 = VERTEX_POINT('',#300356); +#300356 = CARTESIAN_POINT('',(145.278451,-123.61,0.)); +#300357 = LINE('',#300358,#300359); +#300358 = CARTESIAN_POINT('',(145.278451,-123.61,0.)); +#300359 = VECTOR('',#300360,1.); +#300360 = DIRECTION('',(0.,0.,-1.)); +#300361 = ORIENTED_EDGE('',*,*,#300362,.F.); +#300362 = EDGE_CURVE('',#300323,#300355,#300363,.T.); +#300363 = LINE('',#300364,#300365); +#300364 = CARTESIAN_POINT('',(146.019509,-123.608079,0.)); +#300365 = VECTOR('',#300366,1.); +#300366 = DIRECTION('',(-0.999996640163,-2.59223103421E-03,0.)); +#300367 = PLANE('',#300368); +#300368 = AXIS2_PLACEMENT_3D('',#300369,#300370,#300371); +#300369 = CARTESIAN_POINT('',(146.019509,-123.608079,0.)); +#300370 = DIRECTION('',(-2.59223103421E-03,0.999996640163,0.)); +#300371 = DIRECTION('',(-0.999996640163,-2.59223103421E-03,0.)); +#300372 = ADVANCED_FACE('',(#300373),#300398,.F.); +#300373 = FACE_BOUND('',#300374,.F.); +#300374 = EDGE_LOOP('',(#300375,#300376,#300384,#300392)); +#300375 = ORIENTED_EDGE('',*,*,#300354,.T.); +#300376 = ORIENTED_EDGE('',*,*,#300377,.T.); +#300377 = EDGE_CURVE('',#300347,#300378,#300380,.T.); +#300378 = VERTEX_POINT('',#300379); +#300379 = CARTESIAN_POINT('',(145.2695,-123.628078,-3.5E-02)); +#300380 = LINE('',#300381,#300382); +#300381 = CARTESIAN_POINT('',(145.278451,-123.61,-3.5E-02)); +#300382 = VECTOR('',#300383,1.); +#300383 = DIRECTION('',(-0.443720311942,-0.896165322231,0.)); +#300384 = ORIENTED_EDGE('',*,*,#300385,.F.); +#300385 = EDGE_CURVE('',#300386,#300378,#300388,.T.); +#300386 = VERTEX_POINT('',#300387); +#300387 = CARTESIAN_POINT('',(145.2695,-123.628078,0.)); +#300388 = LINE('',#300389,#300390); +#300389 = CARTESIAN_POINT('',(145.2695,-123.628078,0.)); +#300390 = VECTOR('',#300391,1.); +#300391 = DIRECTION('',(0.,0.,-1.)); +#300392 = ORIENTED_EDGE('',*,*,#300393,.F.); +#300393 = EDGE_CURVE('',#300355,#300386,#300394,.T.); +#300394 = LINE('',#300395,#300396); +#300395 = CARTESIAN_POINT('',(145.278451,-123.61,0.)); +#300396 = VECTOR('',#300397,1.); +#300397 = DIRECTION('',(-0.443720311942,-0.896165322231,0.)); +#300398 = PLANE('',#300399); +#300399 = AXIS2_PLACEMENT_3D('',#300400,#300401,#300402); +#300400 = CARTESIAN_POINT('',(145.278451,-123.61,0.)); +#300401 = DIRECTION('',(-0.896165322231,0.443720311942,0.)); +#300402 = DIRECTION('',(-0.443720311942,-0.896165322231,0.)); +#300403 = ADVANCED_FACE('',(#300404),#300429,.F.); +#300404 = FACE_BOUND('',#300405,.F.); +#300405 = EDGE_LOOP('',(#300406,#300407,#300415,#300423)); +#300406 = ORIENTED_EDGE('',*,*,#300385,.T.); +#300407 = ORIENTED_EDGE('',*,*,#300408,.T.); +#300408 = EDGE_CURVE('',#300378,#300409,#300411,.T.); +#300409 = VERTEX_POINT('',#300410); +#300410 = CARTESIAN_POINT('',(145.933148,-124.294443,-3.5E-02)); +#300411 = LINE('',#300412,#300413); +#300412 = CARTESIAN_POINT('',(145.2695,-123.628078,-3.5E-02)); +#300413 = VECTOR('',#300414,1.); +#300414 = DIRECTION('',(0.705660804742,-0.708549806753,0.)); +#300415 = ORIENTED_EDGE('',*,*,#300416,.F.); +#300416 = EDGE_CURVE('',#300417,#300409,#300419,.T.); +#300417 = VERTEX_POINT('',#300418); +#300418 = CARTESIAN_POINT('',(145.933148,-124.294443,0.)); +#300419 = LINE('',#300420,#300421); +#300420 = CARTESIAN_POINT('',(145.933148,-124.294443,0.)); +#300421 = VECTOR('',#300422,1.); +#300422 = DIRECTION('',(0.,0.,-1.)); +#300423 = ORIENTED_EDGE('',*,*,#300424,.F.); +#300424 = EDGE_CURVE('',#300386,#300417,#300425,.T.); +#300425 = LINE('',#300426,#300427); +#300426 = CARTESIAN_POINT('',(145.2695,-123.628078,0.)); +#300427 = VECTOR('',#300428,1.); +#300428 = DIRECTION('',(0.705660804742,-0.708549806753,0.)); +#300429 = PLANE('',#300430); +#300430 = AXIS2_PLACEMENT_3D('',#300431,#300432,#300433); +#300431 = CARTESIAN_POINT('',(145.2695,-123.628078,0.)); +#300432 = DIRECTION('',(-0.708549806753,-0.705660804742,-0.)); +#300433 = DIRECTION('',(0.705660804742,-0.708549806753,0.)); +#300434 = ADVANCED_FACE('',(#300435),#300460,.F.); +#300435 = FACE_BOUND('',#300436,.F.); +#300436 = EDGE_LOOP('',(#300437,#300438,#300446,#300454)); +#300437 = ORIENTED_EDGE('',*,*,#300416,.T.); +#300438 = ORIENTED_EDGE('',*,*,#300439,.T.); +#300439 = EDGE_CURVE('',#300409,#300440,#300442,.T.); +#300440 = VERTEX_POINT('',#300441); +#300441 = CARTESIAN_POINT('',(145.948079,-124.330491,-3.5E-02)); +#300442 = LINE('',#300443,#300444); +#300443 = CARTESIAN_POINT('',(145.933148,-124.294443,-3.5E-02)); +#300444 = VECTOR('',#300445,1.); +#300445 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#300446 = ORIENTED_EDGE('',*,*,#300447,.F.); +#300447 = EDGE_CURVE('',#300448,#300440,#300450,.T.); +#300448 = VERTEX_POINT('',#300449); +#300449 = CARTESIAN_POINT('',(145.948079,-124.330491,0.)); +#300450 = LINE('',#300451,#300452); +#300451 = CARTESIAN_POINT('',(145.948079,-124.330491,0.)); +#300452 = VECTOR('',#300453,1.); +#300453 = DIRECTION('',(0.,0.,-1.)); +#300454 = ORIENTED_EDGE('',*,*,#300455,.F.); +#300455 = EDGE_CURVE('',#300417,#300448,#300456,.T.); +#300456 = LINE('',#300457,#300458); +#300457 = CARTESIAN_POINT('',(145.933148,-124.294443,0.)); +#300458 = VECTOR('',#300459,1.); +#300459 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#300460 = PLANE('',#300461); +#300461 = AXIS2_PLACEMENT_3D('',#300462,#300463,#300464); +#300462 = CARTESIAN_POINT('',(145.933148,-124.294443,0.)); +#300463 = DIRECTION('',(-0.923884701879,-0.382670952169,-0.)); +#300464 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#300465 = ADVANCED_FACE('',(#300466),#300491,.F.); +#300466 = FACE_BOUND('',#300467,.F.); +#300467 = EDGE_LOOP('',(#300468,#300469,#300477,#300485)); +#300468 = ORIENTED_EDGE('',*,*,#300447,.T.); +#300469 = ORIENTED_EDGE('',*,*,#300470,.T.); +#300470 = EDGE_CURVE('',#300440,#300471,#300473,.T.); +#300471 = VERTEX_POINT('',#300472); +#300472 = CARTESIAN_POINT('',(145.948079,-124.969509,-3.5E-02)); +#300473 = LINE('',#300474,#300475); +#300474 = CARTESIAN_POINT('',(145.948079,-124.330491,-3.5E-02)); +#300475 = VECTOR('',#300476,1.); +#300476 = DIRECTION('',(0.,-1.,0.)); +#300477 = ORIENTED_EDGE('',*,*,#300478,.F.); +#300478 = EDGE_CURVE('',#300479,#300471,#300481,.T.); +#300479 = VERTEX_POINT('',#300480); +#300480 = CARTESIAN_POINT('',(145.948079,-124.969509,0.)); +#300481 = LINE('',#300482,#300483); +#300482 = CARTESIAN_POINT('',(145.948079,-124.969509,0.)); +#300483 = VECTOR('',#300484,1.); +#300484 = DIRECTION('',(0.,0.,-1.)); +#300485 = ORIENTED_EDGE('',*,*,#300486,.F.); +#300486 = EDGE_CURVE('',#300448,#300479,#300487,.T.); +#300487 = LINE('',#300488,#300489); +#300488 = CARTESIAN_POINT('',(145.948079,-124.330491,0.)); +#300489 = VECTOR('',#300490,1.); +#300490 = DIRECTION('',(0.,-1.,0.)); +#300491 = PLANE('',#300492); +#300492 = AXIS2_PLACEMENT_3D('',#300493,#300494,#300495); +#300493 = CARTESIAN_POINT('',(145.948079,-124.330491,0.)); +#300494 = DIRECTION('',(-1.,-0.,-0.)); +#300495 = DIRECTION('',(0.,-1.,0.)); +#300496 = ADVANCED_FACE('',(#300497),#300524,.T.); +#300497 = FACE_BOUND('',#300498,.F.); +#300498 = EDGE_LOOP('',(#300499,#300500,#300509,#300517)); +#300499 = ORIENTED_EDGE('',*,*,#300478,.T.); +#300500 = ORIENTED_EDGE('',*,*,#300501,.T.); +#300501 = EDGE_CURVE('',#300471,#300502,#300504,.T.); +#300502 = VERTEX_POINT('',#300503); +#300503 = CARTESIAN_POINT('',(145.751921,-124.969509,-3.5E-02)); +#300504 = CIRCLE('',#300505,0.100000456609); +#300505 = AXIS2_PLACEMENT_3D('',#300506,#300507,#300508); +#300506 = CARTESIAN_POINT('',(145.85,-124.95,-3.5E-02)); +#300507 = DIRECTION('',(-0.,0.,-1.)); +#300508 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#300509 = ORIENTED_EDGE('',*,*,#300510,.F.); +#300510 = EDGE_CURVE('',#300511,#300502,#300513,.T.); +#300511 = VERTEX_POINT('',#300512); +#300512 = CARTESIAN_POINT('',(145.751921,-124.969509,0.)); +#300513 = LINE('',#300514,#300515); +#300514 = CARTESIAN_POINT('',(145.751921,-124.969509,0.)); +#300515 = VECTOR('',#300516,1.); +#300516 = DIRECTION('',(0.,0.,-1.)); +#300517 = ORIENTED_EDGE('',*,*,#300518,.F.); +#300518 = EDGE_CURVE('',#300479,#300511,#300519,.T.); +#300519 = CIRCLE('',#300520,0.100000456609); +#300520 = AXIS2_PLACEMENT_3D('',#300521,#300522,#300523); +#300521 = CARTESIAN_POINT('',(145.85,-124.95,0.)); +#300522 = DIRECTION('',(-0.,0.,-1.)); +#300523 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#300524 = CYLINDRICAL_SURFACE('',#300525,0.100000456609); +#300525 = AXIS2_PLACEMENT_3D('',#300526,#300527,#300528); +#300526 = CARTESIAN_POINT('',(145.85,-124.95,0.)); +#300527 = DIRECTION('',(0.,-0.,1.)); +#300528 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#300529 = ADVANCED_FACE('',(#300530),#300555,.F.); +#300530 = FACE_BOUND('',#300531,.F.); +#300531 = EDGE_LOOP('',(#300532,#300533,#300541,#300549)); +#300532 = ORIENTED_EDGE('',*,*,#300510,.T.); +#300533 = ORIENTED_EDGE('',*,*,#300534,.T.); +#300534 = EDGE_CURVE('',#300502,#300535,#300537,.T.); +#300535 = VERTEX_POINT('',#300536); +#300536 = CARTESIAN_POINT('',(145.75,-124.391421,-3.5E-02)); +#300537 = LINE('',#300538,#300539); +#300538 = CARTESIAN_POINT('',(145.751921,-124.969509,-3.5E-02)); +#300539 = VECTOR('',#300540,1.); +#300540 = DIRECTION('',(-3.323005137264E-03,0.999994478803,0.)); +#300541 = ORIENTED_EDGE('',*,*,#300542,.F.); +#300542 = EDGE_CURVE('',#300543,#300535,#300545,.T.); +#300543 = VERTEX_POINT('',#300544); +#300544 = CARTESIAN_POINT('',(145.75,-124.391421,0.)); +#300545 = LINE('',#300546,#300547); +#300546 = CARTESIAN_POINT('',(145.75,-124.391421,0.)); +#300547 = VECTOR('',#300548,1.); +#300548 = DIRECTION('',(0.,0.,-1.)); +#300549 = ORIENTED_EDGE('',*,*,#300550,.F.); +#300550 = EDGE_CURVE('',#300511,#300543,#300551,.T.); +#300551 = LINE('',#300552,#300553); +#300552 = CARTESIAN_POINT('',(145.751921,-124.969509,0.)); +#300553 = VECTOR('',#300554,1.); +#300554 = DIRECTION('',(-3.323005137264E-03,0.999994478803,0.)); +#300555 = PLANE('',#300556); +#300556 = AXIS2_PLACEMENT_3D('',#300557,#300558,#300559); +#300557 = CARTESIAN_POINT('',(145.751921,-124.969509,0.)); +#300558 = DIRECTION('',(0.999994478803,3.323005137264E-03,0.)); +#300559 = DIRECTION('',(-3.323005137264E-03,0.999994478803,0.)); +#300560 = ADVANCED_FACE('',(#300561),#300586,.F.); +#300561 = FACE_BOUND('',#300562,.F.); +#300562 = EDGE_LOOP('',(#300563,#300564,#300572,#300580)); +#300563 = ORIENTED_EDGE('',*,*,#300542,.T.); +#300564 = ORIENTED_EDGE('',*,*,#300565,.T.); +#300565 = EDGE_CURVE('',#300535,#300566,#300568,.T.); +#300566 = VERTEX_POINT('',#300567); +#300567 = CARTESIAN_POINT('',(145.128078,-123.7695,-3.5E-02)); +#300568 = LINE('',#300569,#300570); +#300569 = CARTESIAN_POINT('',(145.75,-124.391421,-3.5E-02)); +#300570 = VECTOR('',#300571,1.); +#300571 = DIRECTION('',(-0.707107349672,0.707106212701,0.)); +#300572 = ORIENTED_EDGE('',*,*,#300573,.F.); +#300573 = EDGE_CURVE('',#300574,#300566,#300576,.T.); +#300574 = VERTEX_POINT('',#300575); +#300575 = CARTESIAN_POINT('',(145.128078,-123.7695,0.)); +#300576 = LINE('',#300577,#300578); +#300577 = CARTESIAN_POINT('',(145.128078,-123.7695,0.)); +#300578 = VECTOR('',#300579,1.); +#300579 = DIRECTION('',(0.,0.,-1.)); +#300580 = ORIENTED_EDGE('',*,*,#300581,.F.); +#300581 = EDGE_CURVE('',#300543,#300574,#300582,.T.); +#300582 = LINE('',#300583,#300584); +#300583 = CARTESIAN_POINT('',(145.75,-124.391421,0.)); +#300584 = VECTOR('',#300585,1.); +#300585 = DIRECTION('',(-0.707107349672,0.707106212701,0.)); +#300586 = PLANE('',#300587); +#300587 = AXIS2_PLACEMENT_3D('',#300588,#300589,#300590); +#300588 = CARTESIAN_POINT('',(145.75,-124.391421,0.)); +#300589 = DIRECTION('',(0.707106212701,0.707107349672,0.)); +#300590 = DIRECTION('',(-0.707107349672,0.707106212701,0.)); +#300591 = ADVANCED_FACE('',(#300592),#300617,.F.); +#300592 = FACE_BOUND('',#300593,.F.); +#300593 = EDGE_LOOP('',(#300594,#300595,#300603,#300611)); +#300594 = ORIENTED_EDGE('',*,*,#300573,.T.); +#300595 = ORIENTED_EDGE('',*,*,#300596,.T.); +#300596 = EDGE_CURVE('',#300566,#300597,#300599,.T.); +#300597 = VERTEX_POINT('',#300598); +#300598 = CARTESIAN_POINT('',(145.114805,-123.777164,-3.5E-02)); +#300599 = LINE('',#300600,#300601); +#300600 = CARTESIAN_POINT('',(145.128078,-123.7695,-3.5E-02)); +#300601 = VECTOR('',#300602,1.); +#300602 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#300603 = ORIENTED_EDGE('',*,*,#300604,.F.); +#300604 = EDGE_CURVE('',#300605,#300597,#300607,.T.); +#300605 = VERTEX_POINT('',#300606); +#300606 = CARTESIAN_POINT('',(145.114805,-123.777164,0.)); +#300607 = LINE('',#300608,#300609); +#300608 = CARTESIAN_POINT('',(145.114805,-123.777164,0.)); +#300609 = VECTOR('',#300610,1.); +#300610 = DIRECTION('',(0.,0.,-1.)); +#300611 = ORIENTED_EDGE('',*,*,#300612,.F.); +#300612 = EDGE_CURVE('',#300574,#300605,#300613,.T.); +#300613 = LINE('',#300614,#300615); +#300614 = CARTESIAN_POINT('',(145.128078,-123.7695,0.)); +#300615 = VECTOR('',#300616,1.); +#300616 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#300617 = PLANE('',#300618); +#300618 = AXIS2_PLACEMENT_3D('',#300619,#300620,#300621); +#300619 = CARTESIAN_POINT('',(145.128078,-123.7695,0.)); +#300620 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#300621 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#300622 = ADVANCED_FACE('',(#300623),#300650,.T.); +#300623 = FACE_BOUND('',#300624,.F.); +#300624 = EDGE_LOOP('',(#300625,#300626,#300635,#300643)); +#300625 = ORIENTED_EDGE('',*,*,#300604,.T.); +#300626 = ORIENTED_EDGE('',*,*,#300627,.T.); +#300627 = EDGE_CURVE('',#300597,#300628,#300630,.T.); +#300628 = VERTEX_POINT('',#300629); +#300629 = CARTESIAN_POINT('',(145.277164,-123.385195,-3.5E-02)); +#300630 = CIRCLE('',#300631,0.300000118202); +#300631 = AXIS2_PLACEMENT_3D('',#300632,#300633,#300634); +#300632 = CARTESIAN_POINT('',(145.,-123.5,-3.5E-02)); +#300633 = DIRECTION('',(0.,0.,-1.)); +#300634 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#300635 = ORIENTED_EDGE('',*,*,#300636,.F.); +#300636 = EDGE_CURVE('',#300637,#300628,#300639,.T.); +#300637 = VERTEX_POINT('',#300638); +#300638 = CARTESIAN_POINT('',(145.277164,-123.385195,0.)); +#300639 = LINE('',#300640,#300641); +#300640 = CARTESIAN_POINT('',(145.277164,-123.385195,0.)); +#300641 = VECTOR('',#300642,1.); +#300642 = DIRECTION('',(0.,0.,-1.)); +#300643 = ORIENTED_EDGE('',*,*,#300644,.F.); +#300644 = EDGE_CURVE('',#300605,#300637,#300645,.T.); +#300645 = CIRCLE('',#300646,0.300000118202); +#300646 = AXIS2_PLACEMENT_3D('',#300647,#300648,#300649); +#300647 = CARTESIAN_POINT('',(145.,-123.5,0.)); +#300648 = DIRECTION('',(0.,0.,-1.)); +#300649 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#300650 = CYLINDRICAL_SURFACE('',#300651,0.300000118202); +#300651 = AXIS2_PLACEMENT_3D('',#300652,#300653,#300654); +#300652 = CARTESIAN_POINT('',(145.,-123.5,0.)); +#300653 = DIRECTION('',(-0.,-0.,1.)); +#300654 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#300655 = ADVANCED_FACE('',(#300656),#300672,.F.); +#300656 = FACE_BOUND('',#300657,.F.); +#300657 = EDGE_LOOP('',(#300658,#300659,#300665,#300666)); +#300658 = ORIENTED_EDGE('',*,*,#300636,.T.); +#300659 = ORIENTED_EDGE('',*,*,#300660,.T.); +#300660 = EDGE_CURVE('',#300628,#300275,#300661,.T.); +#300661 = LINE('',#300662,#300663); +#300662 = CARTESIAN_POINT('',(145.277164,-123.385195,-3.5E-02)); +#300663 = VECTOR('',#300664,1.); +#300664 = DIRECTION('',(0.25880161574,-0.965930496304,0.)); +#300665 = ORIENTED_EDGE('',*,*,#300272,.F.); +#300666 = ORIENTED_EDGE('',*,*,#300667,.F.); +#300667 = EDGE_CURVE('',#300637,#300273,#300668,.T.); +#300668 = LINE('',#300669,#300670); +#300669 = CARTESIAN_POINT('',(145.277164,-123.385195,0.)); +#300670 = VECTOR('',#300671,1.); +#300671 = DIRECTION('',(0.25880161574,-0.965930496304,0.)); +#300672 = PLANE('',#300673); +#300673 = AXIS2_PLACEMENT_3D('',#300674,#300675,#300676); +#300674 = CARTESIAN_POINT('',(145.277164,-123.385195,0.)); +#300675 = DIRECTION('',(-0.965930496304,-0.25880161574,-0.)); +#300676 = DIRECTION('',(0.25880161574,-0.965930496304,0.)); +#300677 = ADVANCED_FACE('',(#300678),#300705,.F.); +#300678 = FACE_BOUND('',#300679,.F.); +#300679 = EDGE_LOOP('',(#300680,#300690,#300697,#300698)); +#300680 = ORIENTED_EDGE('',*,*,#300681,.T.); +#300681 = EDGE_CURVE('',#300682,#300684,#300686,.T.); +#300682 = VERTEX_POINT('',#300683); +#300683 = CARTESIAN_POINT('',(145.137255,-123.5,0.)); +#300684 = VERTEX_POINT('',#300685); +#300685 = CARTESIAN_POINT('',(145.137255,-123.5,-3.5E-02)); +#300686 = LINE('',#300687,#300688); +#300687 = CARTESIAN_POINT('',(145.137255,-123.5,0.)); +#300688 = VECTOR('',#300689,1.); +#300689 = DIRECTION('',(0.,0.,-1.)); +#300690 = ORIENTED_EDGE('',*,*,#300691,.T.); +#300691 = EDGE_CURVE('',#300684,#300684,#300692,.T.); +#300692 = CIRCLE('',#300693,0.137255); +#300693 = AXIS2_PLACEMENT_3D('',#300694,#300695,#300696); +#300694 = CARTESIAN_POINT('',(145.,-123.5,-3.5E-02)); +#300695 = DIRECTION('',(0.,0.,1.)); +#300696 = DIRECTION('',(1.,0.,-0.)); +#300697 = ORIENTED_EDGE('',*,*,#300681,.F.); +#300698 = ORIENTED_EDGE('',*,*,#300699,.F.); +#300699 = EDGE_CURVE('',#300682,#300682,#300700,.T.); +#300700 = CIRCLE('',#300701,0.137255); +#300701 = AXIS2_PLACEMENT_3D('',#300702,#300703,#300704); +#300702 = CARTESIAN_POINT('',(145.,-123.5,0.)); +#300703 = DIRECTION('',(0.,0.,1.)); +#300704 = DIRECTION('',(1.,0.,-0.)); +#300705 = CYLINDRICAL_SURFACE('',#300706,0.137255); +#300706 = AXIS2_PLACEMENT_3D('',#300707,#300708,#300709); +#300707 = CARTESIAN_POINT('',(145.,-123.5,0.)); +#300708 = DIRECTION('',(0.,0.,1.)); +#300709 = DIRECTION('',(1.,0.,-0.)); +#300710 = ADVANCED_FACE('',(#300711,#300726),#300729,.F.); +#300711 = FACE_BOUND('',#300712,.F.); +#300712 = EDGE_LOOP('',(#300713,#300714,#300715,#300716,#300717,#300718, + #300719,#300720,#300721,#300722,#300723,#300724,#300725)); +#300713 = ORIENTED_EDGE('',*,*,#300298,.T.); +#300714 = ORIENTED_EDGE('',*,*,#300330,.T.); +#300715 = ORIENTED_EDGE('',*,*,#300362,.T.); +#300716 = ORIENTED_EDGE('',*,*,#300393,.T.); +#300717 = ORIENTED_EDGE('',*,*,#300424,.T.); +#300718 = ORIENTED_EDGE('',*,*,#300455,.T.); +#300719 = ORIENTED_EDGE('',*,*,#300486,.T.); +#300720 = ORIENTED_EDGE('',*,*,#300518,.T.); +#300721 = ORIENTED_EDGE('',*,*,#300550,.T.); +#300722 = ORIENTED_EDGE('',*,*,#300581,.T.); +#300723 = ORIENTED_EDGE('',*,*,#300612,.T.); +#300724 = ORIENTED_EDGE('',*,*,#300644,.T.); +#300725 = ORIENTED_EDGE('',*,*,#300667,.T.); +#300726 = FACE_BOUND('',#300727,.F.); +#300727 = EDGE_LOOP('',(#300728)); +#300728 = ORIENTED_EDGE('',*,*,#300699,.T.); +#300729 = PLANE('',#300730); +#300730 = AXIS2_PLACEMENT_3D('',#300731,#300732,#300733); +#300731 = CARTESIAN_POINT('',(0.,0.,0.)); +#300732 = DIRECTION('',(-0.,-0.,-1.)); +#300733 = DIRECTION('',(-1.,0.,0.)); +#300734 = ADVANCED_FACE('',(#300735,#300750),#300753,.T.); +#300735 = FACE_BOUND('',#300736,.T.); +#300736 = EDGE_LOOP('',(#300737,#300738,#300739,#300740,#300741,#300742, + #300743,#300744,#300745,#300746,#300747,#300748,#300749)); +#300737 = ORIENTED_EDGE('',*,*,#300282,.T.); +#300738 = ORIENTED_EDGE('',*,*,#300313,.T.); +#300739 = ORIENTED_EDGE('',*,*,#300346,.T.); +#300740 = ORIENTED_EDGE('',*,*,#300377,.T.); +#300741 = ORIENTED_EDGE('',*,*,#300408,.T.); +#300742 = ORIENTED_EDGE('',*,*,#300439,.T.); +#300743 = ORIENTED_EDGE('',*,*,#300470,.T.); +#300744 = ORIENTED_EDGE('',*,*,#300501,.T.); +#300745 = ORIENTED_EDGE('',*,*,#300534,.T.); +#300746 = ORIENTED_EDGE('',*,*,#300565,.T.); +#300747 = ORIENTED_EDGE('',*,*,#300596,.T.); +#300748 = ORIENTED_EDGE('',*,*,#300627,.T.); +#300749 = ORIENTED_EDGE('',*,*,#300660,.T.); +#300750 = FACE_BOUND('',#300751,.T.); +#300751 = EDGE_LOOP('',(#300752)); +#300752 = ORIENTED_EDGE('',*,*,#300691,.T.); +#300753 = PLANE('',#300754); +#300754 = AXIS2_PLACEMENT_3D('',#300755,#300756,#300757); +#300755 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#300756 = DIRECTION('',(-0.,-0.,-1.)); +#300757 = DIRECTION('',(-1.,0.,0.)); +#300758 = MANIFOLD_SOLID_BREP('',#300759); +#300759 = CLOSED_SHELL('',(#300760,#300802,#300833,#300866,#300897, + #300928,#300961,#300992,#301023,#301054,#301085,#301107,#301140, + #301162)); +#300760 = ADVANCED_FACE('',(#300761),#300797,.T.); +#300761 = FACE_BOUND('',#300762,.F.); +#300762 = EDGE_LOOP('',(#300763,#300773,#300782,#300790)); +#300763 = ORIENTED_EDGE('',*,*,#300764,.T.); +#300764 = EDGE_CURVE('',#300765,#300767,#300769,.T.); +#300765 = VERTEX_POINT('',#300766); +#300766 = CARTESIAN_POINT('',(124.964442,-120.916853,0.)); +#300767 = VERTEX_POINT('',#300768); +#300768 = CARTESIAN_POINT('',(124.964442,-120.916853,-3.5E-02)); +#300769 = LINE('',#300770,#300771); +#300770 = CARTESIAN_POINT('',(124.964442,-120.916853,0.)); +#300771 = VECTOR('',#300772,1.); +#300772 = DIRECTION('',(0.,0.,-1.)); +#300773 = ORIENTED_EDGE('',*,*,#300774,.T.); +#300774 = EDGE_CURVE('',#300767,#300775,#300777,.T.); +#300775 = VERTEX_POINT('',#300776); +#300776 = CARTESIAN_POINT('',(125.1,-121.059392,-3.5E-02)); +#300777 = CIRCLE('',#300778,9.978873806027E-02); +#300778 = AXIS2_PLACEMENT_3D('',#300779,#300780,#300781); +#300779 = CARTESIAN_POINT('',(125.0199995,-120.9997454389,-3.5E-02)); +#300780 = DIRECTION('',(0.,0.,-1.)); +#300781 = DIRECTION('',(-0.556751203392,0.83067929884,0.)); +#300782 = ORIENTED_EDGE('',*,*,#300783,.F.); +#300783 = EDGE_CURVE('',#300784,#300775,#300786,.T.); +#300784 = VERTEX_POINT('',#300785); +#300785 = CARTESIAN_POINT('',(125.1,-121.059392,0.)); +#300786 = LINE('',#300787,#300788); +#300787 = CARTESIAN_POINT('',(125.1,-121.059392,0.)); +#300788 = VECTOR('',#300789,1.); +#300789 = DIRECTION('',(0.,0.,-1.)); +#300790 = ORIENTED_EDGE('',*,*,#300791,.F.); +#300791 = EDGE_CURVE('',#300765,#300784,#300792,.T.); +#300792 = CIRCLE('',#300793,9.978873806027E-02); +#300793 = AXIS2_PLACEMENT_3D('',#300794,#300795,#300796); +#300794 = CARTESIAN_POINT('',(125.0199995,-120.9997454389,0.)); +#300795 = DIRECTION('',(0.,0.,-1.)); +#300796 = DIRECTION('',(-0.556751203392,0.83067929884,0.)); +#300797 = CYLINDRICAL_SURFACE('',#300798,9.978873806027E-02); +#300798 = AXIS2_PLACEMENT_3D('',#300799,#300800,#300801); +#300799 = CARTESIAN_POINT('',(125.0199995,-120.9997454389,0.)); +#300800 = DIRECTION('',(-0.,-0.,1.)); +#300801 = DIRECTION('',(-0.556751203392,0.83067929884,0.)); +#300802 = ADVANCED_FACE('',(#300803),#300828,.F.); +#300803 = FACE_BOUND('',#300804,.F.); +#300804 = EDGE_LOOP('',(#300805,#300806,#300814,#300822)); +#300805 = ORIENTED_EDGE('',*,*,#300783,.T.); +#300806 = ORIENTED_EDGE('',*,*,#300807,.T.); +#300807 = EDGE_CURVE('',#300775,#300808,#300810,.T.); +#300808 = VERTEX_POINT('',#300809); +#300809 = CARTESIAN_POINT('',(125.098079,-124.019509,-3.5E-02)); +#300810 = LINE('',#300811,#300812); +#300811 = CARTESIAN_POINT('',(125.1,-121.059392,-3.5E-02)); +#300812 = VECTOR('',#300813,1.); +#300813 = DIRECTION('',(-6.489606983377E-04,-0.999999789425,0.)); +#300814 = ORIENTED_EDGE('',*,*,#300815,.F.); +#300815 = EDGE_CURVE('',#300816,#300808,#300818,.T.); +#300816 = VERTEX_POINT('',#300817); +#300817 = CARTESIAN_POINT('',(125.098079,-124.019509,0.)); +#300818 = LINE('',#300819,#300820); +#300819 = CARTESIAN_POINT('',(125.098079,-124.019509,0.)); +#300820 = VECTOR('',#300821,1.); +#300821 = DIRECTION('',(0.,0.,-1.)); +#300822 = ORIENTED_EDGE('',*,*,#300823,.F.); +#300823 = EDGE_CURVE('',#300784,#300816,#300824,.T.); +#300824 = LINE('',#300825,#300826); +#300825 = CARTESIAN_POINT('',(125.1,-121.059392,0.)); +#300826 = VECTOR('',#300827,1.); +#300827 = DIRECTION('',(-6.489606983377E-04,-0.999999789425,0.)); +#300828 = PLANE('',#300829); +#300829 = AXIS2_PLACEMENT_3D('',#300830,#300831,#300832); +#300830 = CARTESIAN_POINT('',(125.1,-121.059392,0.)); +#300831 = DIRECTION('',(-0.999999789425,6.489606983377E-04,0.)); +#300832 = DIRECTION('',(-6.489606983377E-04,-0.999999789425,0.)); +#300833 = ADVANCED_FACE('',(#300834),#300861,.T.); +#300834 = FACE_BOUND('',#300835,.F.); +#300835 = EDGE_LOOP('',(#300836,#300837,#300846,#300854)); +#300836 = ORIENTED_EDGE('',*,*,#300815,.T.); +#300837 = ORIENTED_EDGE('',*,*,#300838,.T.); +#300838 = EDGE_CURVE('',#300808,#300839,#300841,.T.); +#300839 = VERTEX_POINT('',#300840); +#300840 = CARTESIAN_POINT('',(125.019509,-124.098079,-3.5E-02)); +#300841 = CIRCLE('',#300842,0.100002891901); +#300842 = AXIS2_PLACEMENT_3D('',#300843,#300844,#300845); +#300843 = CARTESIAN_POINT('',(124.99999792896,-123.9999979289,-3.5E-02) + ); +#300844 = DIRECTION('',(0.,0.,-1.)); +#300845 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#300846 = ORIENTED_EDGE('',*,*,#300847,.F.); +#300847 = EDGE_CURVE('',#300848,#300839,#300850,.T.); +#300848 = VERTEX_POINT('',#300849); +#300849 = CARTESIAN_POINT('',(125.019509,-124.098079,0.)); +#300850 = LINE('',#300851,#300852); +#300851 = CARTESIAN_POINT('',(125.019509,-124.098079,0.)); +#300852 = VECTOR('',#300853,1.); +#300853 = DIRECTION('',(0.,0.,-1.)); +#300854 = ORIENTED_EDGE('',*,*,#300855,.F.); +#300855 = EDGE_CURVE('',#300816,#300848,#300856,.T.); +#300856 = CIRCLE('',#300857,0.100002891901); +#300857 = AXIS2_PLACEMENT_3D('',#300858,#300859,#300860); +#300858 = CARTESIAN_POINT('',(124.99999792896,-123.9999979289,0.)); +#300859 = DIRECTION('',(0.,0.,-1.)); +#300860 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#300861 = CYLINDRICAL_SURFACE('',#300862,0.100002891901); +#300862 = AXIS2_PLACEMENT_3D('',#300863,#300864,#300865); +#300863 = CARTESIAN_POINT('',(124.99999792896,-123.9999979289,0.)); +#300864 = DIRECTION('',(-0.,-0.,1.)); +#300865 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#300866 = ADVANCED_FACE('',(#300867),#300892,.F.); +#300867 = FACE_BOUND('',#300868,.F.); +#300868 = EDGE_LOOP('',(#300869,#300870,#300878,#300886)); +#300869 = ORIENTED_EDGE('',*,*,#300847,.T.); +#300870 = ORIENTED_EDGE('',*,*,#300871,.T.); +#300871 = EDGE_CURVE('',#300839,#300872,#300874,.T.); +#300872 = VERTEX_POINT('',#300873); +#300873 = CARTESIAN_POINT('',(123.781131,-124.1,-3.5E-02)); +#300874 = LINE('',#300875,#300876); +#300875 = CARTESIAN_POINT('',(125.019509,-124.098079,-3.5E-02)); +#300876 = VECTOR('',#300877,1.); +#300877 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#300878 = ORIENTED_EDGE('',*,*,#300879,.F.); +#300879 = EDGE_CURVE('',#300880,#300872,#300882,.T.); +#300880 = VERTEX_POINT('',#300881); +#300881 = CARTESIAN_POINT('',(123.781131,-124.1,0.)); +#300882 = LINE('',#300883,#300884); +#300883 = CARTESIAN_POINT('',(123.781131,-124.1,0.)); +#300884 = VECTOR('',#300885,1.); +#300885 = DIRECTION('',(0.,0.,-1.)); +#300886 = ORIENTED_EDGE('',*,*,#300887,.F.); +#300887 = EDGE_CURVE('',#300848,#300880,#300888,.T.); +#300888 = LINE('',#300889,#300890); +#300889 = CARTESIAN_POINT('',(125.019509,-124.098079,0.)); +#300890 = VECTOR('',#300891,1.); +#300891 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#300892 = PLANE('',#300893); +#300893 = AXIS2_PLACEMENT_3D('',#300894,#300895,#300896); +#300894 = CARTESIAN_POINT('',(125.019509,-124.098079,0.)); +#300895 = DIRECTION('',(-1.551220781342E-03,0.999998796856,0.)); +#300896 = DIRECTION('',(-0.999998796856,-1.551220781342E-03,0.)); +#300897 = ADVANCED_FACE('',(#300898),#300923,.F.); +#300898 = FACE_BOUND('',#300899,.F.); +#300899 = EDGE_LOOP('',(#300900,#300901,#300909,#300917)); +#300900 = ORIENTED_EDGE('',*,*,#300879,.T.); +#300901 = ORIENTED_EDGE('',*,*,#300902,.T.); +#300902 = EDGE_CURVE('',#300872,#300903,#300905,.T.); +#300903 = VERTEX_POINT('',#300904); +#300904 = CARTESIAN_POINT('',(123.777164,-124.114805,-3.5E-02)); +#300905 = LINE('',#300906,#300907); +#300906 = CARTESIAN_POINT('',(123.781131,-124.1,-3.5E-02)); +#300907 = VECTOR('',#300908,1.); +#300908 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#300909 = ORIENTED_EDGE('',*,*,#300910,.F.); +#300910 = EDGE_CURVE('',#300911,#300903,#300913,.T.); +#300911 = VERTEX_POINT('',#300912); +#300912 = CARTESIAN_POINT('',(123.777164,-124.114805,0.)); +#300913 = LINE('',#300914,#300915); +#300914 = CARTESIAN_POINT('',(123.777164,-124.114805,0.)); +#300915 = VECTOR('',#300916,1.); +#300916 = DIRECTION('',(0.,0.,-1.)); +#300917 = ORIENTED_EDGE('',*,*,#300918,.F.); +#300918 = EDGE_CURVE('',#300880,#300911,#300919,.T.); +#300919 = LINE('',#300920,#300921); +#300920 = CARTESIAN_POINT('',(123.781131,-124.1,0.)); +#300921 = VECTOR('',#300922,1.); +#300922 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#300923 = PLANE('',#300924); +#300924 = AXIS2_PLACEMENT_3D('',#300925,#300926,#300927); +#300925 = CARTESIAN_POINT('',(123.781131,-124.1,0.)); +#300926 = DIRECTION('',(-0.965925627198,0.258819788119,0.)); +#300927 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#300928 = ADVANCED_FACE('',(#300929),#300956,.T.); +#300929 = FACE_BOUND('',#300930,.F.); +#300930 = EDGE_LOOP('',(#300931,#300932,#300941,#300949)); +#300931 = ORIENTED_EDGE('',*,*,#300910,.T.); +#300932 = ORIENTED_EDGE('',*,*,#300933,.T.); +#300933 = EDGE_CURVE('',#300903,#300934,#300936,.T.); +#300934 = VERTEX_POINT('',#300935); +#300935 = CARTESIAN_POINT('',(123.777164,-123.885195,-3.5E-02)); +#300936 = CIRCLE('',#300937,0.299999850918); +#300937 = AXIS2_PLACEMENT_3D('',#300938,#300939,#300940); +#300938 = CARTESIAN_POINT('',(123.5000002893,-124.,-3.5E-02)); +#300939 = DIRECTION('',(0.,0.,-1.)); +#300940 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#300941 = ORIENTED_EDGE('',*,*,#300942,.F.); +#300942 = EDGE_CURVE('',#300943,#300934,#300945,.T.); +#300943 = VERTEX_POINT('',#300944); +#300944 = CARTESIAN_POINT('',(123.777164,-123.885195,0.)); +#300945 = LINE('',#300946,#300947); +#300946 = CARTESIAN_POINT('',(123.777164,-123.885195,0.)); +#300947 = VECTOR('',#300948,1.); +#300948 = DIRECTION('',(0.,0.,-1.)); +#300949 = ORIENTED_EDGE('',*,*,#300950,.F.); +#300950 = EDGE_CURVE('',#300911,#300943,#300951,.T.); +#300951 = CIRCLE('',#300952,0.299999850918); +#300952 = AXIS2_PLACEMENT_3D('',#300953,#300954,#300955); +#300953 = CARTESIAN_POINT('',(123.5000002893,-124.,0.)); +#300954 = DIRECTION('',(0.,0.,-1.)); +#300955 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#300956 = CYLINDRICAL_SURFACE('',#300957,0.299999850918); +#300957 = AXIS2_PLACEMENT_3D('',#300958,#300959,#300960); +#300958 = CARTESIAN_POINT('',(123.5000002893,-124.,0.)); +#300959 = DIRECTION('',(-0.,-0.,1.)); +#300960 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#300961 = ADVANCED_FACE('',(#300962),#300987,.F.); +#300962 = FACE_BOUND('',#300963,.F.); +#300963 = EDGE_LOOP('',(#300964,#300965,#300973,#300981)); +#300964 = ORIENTED_EDGE('',*,*,#300942,.T.); +#300965 = ORIENTED_EDGE('',*,*,#300966,.T.); +#300966 = EDGE_CURVE('',#300934,#300967,#300969,.T.); +#300967 = VERTEX_POINT('',#300968); +#300968 = CARTESIAN_POINT('',(123.781131,-123.9,-3.5E-02)); +#300969 = LINE('',#300970,#300971); +#300970 = CARTESIAN_POINT('',(123.777164,-123.885195,-3.5E-02)); +#300971 = VECTOR('',#300972,1.); +#300972 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#300973 = ORIENTED_EDGE('',*,*,#300974,.F.); +#300974 = EDGE_CURVE('',#300975,#300967,#300977,.T.); +#300975 = VERTEX_POINT('',#300976); +#300976 = CARTESIAN_POINT('',(123.781131,-123.9,0.)); +#300977 = LINE('',#300978,#300979); +#300978 = CARTESIAN_POINT('',(123.781131,-123.9,0.)); +#300979 = VECTOR('',#300980,1.); +#300980 = DIRECTION('',(0.,0.,-1.)); +#300981 = ORIENTED_EDGE('',*,*,#300982,.F.); +#300982 = EDGE_CURVE('',#300943,#300975,#300983,.T.); +#300983 = LINE('',#300984,#300985); +#300984 = CARTESIAN_POINT('',(123.777164,-123.885195,0.)); +#300985 = VECTOR('',#300986,1.); +#300986 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#300987 = PLANE('',#300988); +#300988 = AXIS2_PLACEMENT_3D('',#300989,#300990,#300991); +#300989 = CARTESIAN_POINT('',(123.777164,-123.885195,0.)); +#300990 = DIRECTION('',(-0.965925627198,-0.258819788119,-0.)); +#300991 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#300992 = ADVANCED_FACE('',(#300993),#301018,.F.); +#300993 = FACE_BOUND('',#300994,.F.); +#300994 = EDGE_LOOP('',(#300995,#300996,#301004,#301012)); +#300995 = ORIENTED_EDGE('',*,*,#300974,.T.); +#300996 = ORIENTED_EDGE('',*,*,#300997,.T.); +#300997 = EDGE_CURVE('',#300967,#300998,#301000,.T.); +#300998 = VERTEX_POINT('',#300999); +#300999 = CARTESIAN_POINT('',(124.9,-123.9,-3.5E-02)); +#301000 = LINE('',#301001,#301002); +#301001 = CARTESIAN_POINT('',(123.781131,-123.9,-3.5E-02)); +#301002 = VECTOR('',#301003,1.); +#301003 = DIRECTION('',(1.,0.,0.)); +#301004 = ORIENTED_EDGE('',*,*,#301005,.F.); +#301005 = EDGE_CURVE('',#301006,#300998,#301008,.T.); +#301006 = VERTEX_POINT('',#301007); +#301007 = CARTESIAN_POINT('',(124.9,-123.9,0.)); +#301008 = LINE('',#301009,#301010); +#301009 = CARTESIAN_POINT('',(124.9,-123.9,0.)); +#301010 = VECTOR('',#301011,1.); +#301011 = DIRECTION('',(0.,0.,-1.)); +#301012 = ORIENTED_EDGE('',*,*,#301013,.F.); +#301013 = EDGE_CURVE('',#300975,#301006,#301014,.T.); +#301014 = LINE('',#301015,#301016); +#301015 = CARTESIAN_POINT('',(123.781131,-123.9,0.)); +#301016 = VECTOR('',#301017,1.); +#301017 = DIRECTION('',(1.,0.,0.)); +#301018 = PLANE('',#301019); +#301019 = AXIS2_PLACEMENT_3D('',#301020,#301021,#301022); +#301020 = CARTESIAN_POINT('',(123.781131,-123.9,0.)); +#301021 = DIRECTION('',(0.,-1.,0.)); +#301022 = DIRECTION('',(1.,0.,0.)); +#301023 = ADVANCED_FACE('',(#301024),#301049,.F.); +#301024 = FACE_BOUND('',#301025,.F.); +#301025 = EDGE_LOOP('',(#301026,#301027,#301035,#301043)); +#301026 = ORIENTED_EDGE('',*,*,#301005,.T.); +#301027 = ORIENTED_EDGE('',*,*,#301028,.T.); +#301028 = EDGE_CURVE('',#300998,#301029,#301031,.T.); +#301029 = VERTEX_POINT('',#301030); +#301030 = CARTESIAN_POINT('',(124.901921,-121.000491,-3.5E-02)); +#301031 = LINE('',#301032,#301033); +#301032 = CARTESIAN_POINT('',(124.9,-123.9,-3.5E-02)); +#301033 = VECTOR('',#301034,1.); +#301034 = DIRECTION('',(6.62525820197E-04,0.99999978053,0.)); +#301035 = ORIENTED_EDGE('',*,*,#301036,.F.); +#301036 = EDGE_CURVE('',#301037,#301029,#301039,.T.); +#301037 = VERTEX_POINT('',#301038); +#301038 = CARTESIAN_POINT('',(124.901921,-121.000491,0.)); +#301039 = LINE('',#301040,#301041); +#301040 = CARTESIAN_POINT('',(124.901921,-121.000491,0.)); +#301041 = VECTOR('',#301042,1.); +#301042 = DIRECTION('',(0.,0.,-1.)); +#301043 = ORIENTED_EDGE('',*,*,#301044,.F.); +#301044 = EDGE_CURVE('',#301006,#301037,#301045,.T.); +#301045 = LINE('',#301046,#301047); +#301046 = CARTESIAN_POINT('',(124.9,-123.9,0.)); +#301047 = VECTOR('',#301048,1.); +#301048 = DIRECTION('',(6.62525820197E-04,0.99999978053,0.)); +#301049 = PLANE('',#301050); +#301050 = AXIS2_PLACEMENT_3D('',#301051,#301052,#301053); +#301051 = CARTESIAN_POINT('',(124.9,-123.9,0.)); +#301052 = DIRECTION('',(0.99999978053,-6.62525820197E-04,0.)); +#301053 = DIRECTION('',(6.62525820197E-04,0.99999978053,0.)); +#301054 = ADVANCED_FACE('',(#301055),#301080,.F.); +#301055 = FACE_BOUND('',#301056,.F.); +#301056 = EDGE_LOOP('',(#301057,#301058,#301066,#301074)); +#301057 = ORIENTED_EDGE('',*,*,#301036,.T.); +#301058 = ORIENTED_EDGE('',*,*,#301059,.T.); +#301059 = EDGE_CURVE('',#301029,#301060,#301062,.T.); +#301060 = VERTEX_POINT('',#301061); +#301061 = CARTESIAN_POINT('',(124.916853,-120.964443,-3.5E-02)); +#301062 = LINE('',#301063,#301064); +#301063 = CARTESIAN_POINT('',(124.901921,-121.000491,-3.5E-02)); +#301064 = VECTOR('',#301065,1.); +#301065 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#301066 = ORIENTED_EDGE('',*,*,#301067,.F.); +#301067 = EDGE_CURVE('',#301068,#301060,#301070,.T.); +#301068 = VERTEX_POINT('',#301069); +#301069 = CARTESIAN_POINT('',(124.916853,-120.964443,0.)); +#301070 = LINE('',#301071,#301072); +#301071 = CARTESIAN_POINT('',(124.916853,-120.964443,0.)); +#301072 = VECTOR('',#301073,1.); +#301073 = DIRECTION('',(0.,0.,-1.)); +#301074 = ORIENTED_EDGE('',*,*,#301075,.F.); +#301075 = EDGE_CURVE('',#301037,#301068,#301076,.T.); +#301076 = LINE('',#301077,#301078); +#301077 = CARTESIAN_POINT('',(124.901921,-121.000491,0.)); +#301078 = VECTOR('',#301079,1.); +#301079 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#301080 = PLANE('',#301081); +#301081 = AXIS2_PLACEMENT_3D('',#301082,#301083,#301084); +#301082 = CARTESIAN_POINT('',(124.901921,-121.000491,0.)); +#301083 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#301084 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#301085 = ADVANCED_FACE('',(#301086),#301102,.F.); +#301086 = FACE_BOUND('',#301087,.F.); +#301087 = EDGE_LOOP('',(#301088,#301089,#301095,#301096)); +#301088 = ORIENTED_EDGE('',*,*,#301067,.T.); +#301089 = ORIENTED_EDGE('',*,*,#301090,.T.); +#301090 = EDGE_CURVE('',#301060,#300767,#301091,.T.); +#301091 = LINE('',#301092,#301093); +#301092 = CARTESIAN_POINT('',(124.916853,-120.964443,-3.5E-02)); +#301093 = VECTOR('',#301094,1.); +#301094 = DIRECTION('',(0.707099351916,0.707114210379,0.)); +#301095 = ORIENTED_EDGE('',*,*,#300764,.F.); +#301096 = ORIENTED_EDGE('',*,*,#301097,.F.); +#301097 = EDGE_CURVE('',#301068,#300765,#301098,.T.); +#301098 = LINE('',#301099,#301100); +#301099 = CARTESIAN_POINT('',(124.916853,-120.964443,0.)); +#301100 = VECTOR('',#301101,1.); +#301101 = DIRECTION('',(0.707099351916,0.707114210379,0.)); +#301102 = PLANE('',#301103); +#301103 = AXIS2_PLACEMENT_3D('',#301104,#301105,#301106); +#301104 = CARTESIAN_POINT('',(124.916853,-120.964443,0.)); +#301105 = DIRECTION('',(0.707114210379,-0.707099351916,0.)); +#301106 = DIRECTION('',(0.707099351916,0.707114210379,0.)); +#301107 = ADVANCED_FACE('',(#301108),#301135,.F.); +#301108 = FACE_BOUND('',#301109,.F.); +#301109 = EDGE_LOOP('',(#301110,#301120,#301127,#301128)); +#301110 = ORIENTED_EDGE('',*,*,#301111,.T.); +#301111 = EDGE_CURVE('',#301112,#301114,#301116,.T.); +#301112 = VERTEX_POINT('',#301113); +#301113 = CARTESIAN_POINT('',(123.637255,-124.,0.)); +#301114 = VERTEX_POINT('',#301115); +#301115 = CARTESIAN_POINT('',(123.637255,-124.,-3.5E-02)); +#301116 = LINE('',#301117,#301118); +#301117 = CARTESIAN_POINT('',(123.637255,-124.,0.)); +#301118 = VECTOR('',#301119,1.); +#301119 = DIRECTION('',(0.,0.,-1.)); +#301120 = ORIENTED_EDGE('',*,*,#301121,.T.); +#301121 = EDGE_CURVE('',#301114,#301114,#301122,.T.); +#301122 = CIRCLE('',#301123,0.137255); +#301123 = AXIS2_PLACEMENT_3D('',#301124,#301125,#301126); +#301124 = CARTESIAN_POINT('',(123.5,-124.,-3.5E-02)); +#301125 = DIRECTION('',(0.,0.,1.)); +#301126 = DIRECTION('',(1.,0.,-0.)); +#301127 = ORIENTED_EDGE('',*,*,#301111,.F.); +#301128 = ORIENTED_EDGE('',*,*,#301129,.F.); +#301129 = EDGE_CURVE('',#301112,#301112,#301130,.T.); +#301130 = CIRCLE('',#301131,0.137255); +#301131 = AXIS2_PLACEMENT_3D('',#301132,#301133,#301134); +#301132 = CARTESIAN_POINT('',(123.5,-124.,0.)); +#301133 = DIRECTION('',(0.,0.,1.)); +#301134 = DIRECTION('',(1.,0.,-0.)); +#301135 = CYLINDRICAL_SURFACE('',#301136,0.137255); +#301136 = AXIS2_PLACEMENT_3D('',#301137,#301138,#301139); +#301137 = CARTESIAN_POINT('',(123.5,-124.,0.)); +#301138 = DIRECTION('',(0.,0.,1.)); +#301139 = DIRECTION('',(1.,0.,-0.)); +#301140 = ADVANCED_FACE('',(#301141,#301154),#301157,.F.); +#301141 = FACE_BOUND('',#301142,.F.); +#301142 = EDGE_LOOP('',(#301143,#301144,#301145,#301146,#301147,#301148, + #301149,#301150,#301151,#301152,#301153)); +#301143 = ORIENTED_EDGE('',*,*,#300791,.T.); +#301144 = ORIENTED_EDGE('',*,*,#300823,.T.); +#301145 = ORIENTED_EDGE('',*,*,#300855,.T.); +#301146 = ORIENTED_EDGE('',*,*,#300887,.T.); +#301147 = ORIENTED_EDGE('',*,*,#300918,.T.); +#301148 = ORIENTED_EDGE('',*,*,#300950,.T.); +#301149 = ORIENTED_EDGE('',*,*,#300982,.T.); +#301150 = ORIENTED_EDGE('',*,*,#301013,.T.); +#301151 = ORIENTED_EDGE('',*,*,#301044,.T.); +#301152 = ORIENTED_EDGE('',*,*,#301075,.T.); +#301153 = ORIENTED_EDGE('',*,*,#301097,.T.); +#301154 = FACE_BOUND('',#301155,.F.); +#301155 = EDGE_LOOP('',(#301156)); +#301156 = ORIENTED_EDGE('',*,*,#301129,.T.); +#301157 = PLANE('',#301158); +#301158 = AXIS2_PLACEMENT_3D('',#301159,#301160,#301161); +#301159 = CARTESIAN_POINT('',(0.,0.,0.)); +#301160 = DIRECTION('',(-0.,-0.,-1.)); +#301161 = DIRECTION('',(-1.,0.,0.)); +#301162 = ADVANCED_FACE('',(#301163,#301176),#301179,.T.); +#301163 = FACE_BOUND('',#301164,.T.); +#301164 = EDGE_LOOP('',(#301165,#301166,#301167,#301168,#301169,#301170, + #301171,#301172,#301173,#301174,#301175)); +#301165 = ORIENTED_EDGE('',*,*,#300774,.T.); +#301166 = ORIENTED_EDGE('',*,*,#300807,.T.); +#301167 = ORIENTED_EDGE('',*,*,#300838,.T.); +#301168 = ORIENTED_EDGE('',*,*,#300871,.T.); +#301169 = ORIENTED_EDGE('',*,*,#300902,.T.); +#301170 = ORIENTED_EDGE('',*,*,#300933,.T.); +#301171 = ORIENTED_EDGE('',*,*,#300966,.T.); +#301172 = ORIENTED_EDGE('',*,*,#300997,.T.); +#301173 = ORIENTED_EDGE('',*,*,#301028,.T.); +#301174 = ORIENTED_EDGE('',*,*,#301059,.T.); +#301175 = ORIENTED_EDGE('',*,*,#301090,.T.); +#301176 = FACE_BOUND('',#301177,.T.); +#301177 = EDGE_LOOP('',(#301178)); +#301178 = ORIENTED_EDGE('',*,*,#301121,.T.); +#301179 = PLANE('',#301180); +#301180 = AXIS2_PLACEMENT_3D('',#301181,#301182,#301183); +#301181 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#301182 = DIRECTION('',(-0.,-0.,-1.)); +#301183 = DIRECTION('',(-1.,0.,0.)); +#301184 = MANIFOLD_SOLID_BREP('',#301185); +#301185 = CLOSED_SHELL('',(#301186,#301219,#301252,#301264)); +#301186 = ADVANCED_FACE('',(#301187),#301214,.T.); +#301187 = FACE_BOUND('',#301188,.T.); +#301188 = EDGE_LOOP('',(#301189,#301199,#301206,#301207)); +#301189 = ORIENTED_EDGE('',*,*,#301190,.T.); +#301190 = EDGE_CURVE('',#301191,#301193,#301195,.T.); +#301191 = VERTEX_POINT('',#301192); +#301192 = CARTESIAN_POINT('',(129.05,-121.25,0.)); +#301193 = VERTEX_POINT('',#301194); +#301194 = CARTESIAN_POINT('',(129.05,-121.25,-3.5E-02)); +#301195 = LINE('',#301196,#301197); +#301196 = CARTESIAN_POINT('',(129.05,-121.25,0.)); +#301197 = VECTOR('',#301198,1.); +#301198 = DIRECTION('',(0.,0.,-1.)); +#301199 = ORIENTED_EDGE('',*,*,#301200,.T.); +#301200 = EDGE_CURVE('',#301193,#301193,#301201,.T.); +#301201 = CIRCLE('',#301202,0.3); +#301202 = AXIS2_PLACEMENT_3D('',#301203,#301204,#301205); +#301203 = CARTESIAN_POINT('',(128.75,-121.25,-3.5E-02)); +#301204 = DIRECTION('',(0.,0.,1.)); +#301205 = DIRECTION('',(1.,0.,-0.)); +#301206 = ORIENTED_EDGE('',*,*,#301190,.F.); +#301207 = ORIENTED_EDGE('',*,*,#301208,.F.); +#301208 = EDGE_CURVE('',#301191,#301191,#301209,.T.); +#301209 = CIRCLE('',#301210,0.3); +#301210 = AXIS2_PLACEMENT_3D('',#301211,#301212,#301213); +#301211 = CARTESIAN_POINT('',(128.75,-121.25,0.)); +#301212 = DIRECTION('',(0.,0.,1.)); +#301213 = DIRECTION('',(1.,0.,-0.)); +#301214 = CYLINDRICAL_SURFACE('',#301215,0.3); +#301215 = AXIS2_PLACEMENT_3D('',#301216,#301217,#301218); +#301216 = CARTESIAN_POINT('',(128.75,-121.25,0.)); +#301217 = DIRECTION('',(0.,0.,1.)); +#301218 = DIRECTION('',(1.,0.,-0.)); +#301219 = ADVANCED_FACE('',(#301220),#301247,.F.); +#301220 = FACE_BOUND('',#301221,.F.); +#301221 = EDGE_LOOP('',(#301222,#301232,#301239,#301240)); +#301222 = ORIENTED_EDGE('',*,*,#301223,.T.); +#301223 = EDGE_CURVE('',#301224,#301226,#301228,.T.); +#301224 = VERTEX_POINT('',#301225); +#301225 = CARTESIAN_POINT('',(128.887255,-121.25,0.)); +#301226 = VERTEX_POINT('',#301227); +#301227 = CARTESIAN_POINT('',(128.887255,-121.25,-3.5E-02)); +#301228 = LINE('',#301229,#301230); +#301229 = CARTESIAN_POINT('',(128.887255,-121.25,0.)); +#301230 = VECTOR('',#301231,1.); +#301231 = DIRECTION('',(0.,0.,-1.)); +#301232 = ORIENTED_EDGE('',*,*,#301233,.T.); +#301233 = EDGE_CURVE('',#301226,#301226,#301234,.T.); +#301234 = CIRCLE('',#301235,0.137255); +#301235 = AXIS2_PLACEMENT_3D('',#301236,#301237,#301238); +#301236 = CARTESIAN_POINT('',(128.75,-121.25,-3.5E-02)); +#301237 = DIRECTION('',(0.,0.,1.)); +#301238 = DIRECTION('',(1.,0.,-0.)); +#301239 = ORIENTED_EDGE('',*,*,#301223,.F.); +#301240 = ORIENTED_EDGE('',*,*,#301241,.F.); +#301241 = EDGE_CURVE('',#301224,#301224,#301242,.T.); +#301242 = CIRCLE('',#301243,0.137255); +#301243 = AXIS2_PLACEMENT_3D('',#301244,#301245,#301246); +#301244 = CARTESIAN_POINT('',(128.75,-121.25,0.)); +#301245 = DIRECTION('',(0.,0.,1.)); +#301246 = DIRECTION('',(1.,0.,-0.)); +#301247 = CYLINDRICAL_SURFACE('',#301248,0.137255); +#301248 = AXIS2_PLACEMENT_3D('',#301249,#301250,#301251); +#301249 = CARTESIAN_POINT('',(128.75,-121.25,0.)); +#301250 = DIRECTION('',(0.,0.,1.)); +#301251 = DIRECTION('',(1.,0.,-0.)); +#301252 = ADVANCED_FACE('',(#301253,#301256),#301259,.F.); +#301253 = FACE_BOUND('',#301254,.T.); +#301254 = EDGE_LOOP('',(#301255)); +#301255 = ORIENTED_EDGE('',*,*,#301208,.T.); +#301256 = FACE_BOUND('',#301257,.F.); +#301257 = EDGE_LOOP('',(#301258)); +#301258 = ORIENTED_EDGE('',*,*,#301241,.T.); +#301259 = PLANE('',#301260); +#301260 = AXIS2_PLACEMENT_3D('',#301261,#301262,#301263); +#301261 = CARTESIAN_POINT('',(0.,0.,0.)); +#301262 = DIRECTION('',(-0.,-0.,-1.)); +#301263 = DIRECTION('',(-1.,0.,0.)); +#301264 = ADVANCED_FACE('',(#301265,#301268),#301271,.T.); +#301265 = FACE_BOUND('',#301266,.F.); +#301266 = EDGE_LOOP('',(#301267)); +#301267 = ORIENTED_EDGE('',*,*,#301200,.T.); +#301268 = FACE_BOUND('',#301269,.T.); +#301269 = EDGE_LOOP('',(#301270)); +#301270 = ORIENTED_EDGE('',*,*,#301233,.T.); +#301271 = PLANE('',#301272); +#301272 = AXIS2_PLACEMENT_3D('',#301273,#301274,#301275); +#301273 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#301274 = DIRECTION('',(-0.,-0.,-1.)); +#301275 = DIRECTION('',(-1.,0.,0.)); +#301276 = MANIFOLD_SOLID_BREP('',#301277); +#301277 = CLOSED_SHELL('',(#301278,#301311,#301344,#301356)); +#301278 = ADVANCED_FACE('',(#301279),#301306,.T.); +#301279 = FACE_BOUND('',#301280,.T.); +#301280 = EDGE_LOOP('',(#301281,#301291,#301298,#301299)); +#301281 = ORIENTED_EDGE('',*,*,#301282,.T.); +#301282 = EDGE_CURVE('',#301283,#301285,#301287,.T.); +#301283 = VERTEX_POINT('',#301284); +#301284 = CARTESIAN_POINT('',(142.8,-121.25,0.)); +#301285 = VERTEX_POINT('',#301286); +#301286 = CARTESIAN_POINT('',(142.8,-121.25,-3.5E-02)); +#301287 = LINE('',#301288,#301289); +#301288 = CARTESIAN_POINT('',(142.8,-121.25,0.)); +#301289 = VECTOR('',#301290,1.); +#301290 = DIRECTION('',(0.,0.,-1.)); +#301291 = ORIENTED_EDGE('',*,*,#301292,.T.); +#301292 = EDGE_CURVE('',#301285,#301285,#301293,.T.); +#301293 = CIRCLE('',#301294,0.3); +#301294 = AXIS2_PLACEMENT_3D('',#301295,#301296,#301297); +#301295 = CARTESIAN_POINT('',(142.5,-121.25,-3.5E-02)); +#301296 = DIRECTION('',(0.,0.,1.)); +#301297 = DIRECTION('',(1.,0.,-0.)); +#301298 = ORIENTED_EDGE('',*,*,#301282,.F.); +#301299 = ORIENTED_EDGE('',*,*,#301300,.F.); +#301300 = EDGE_CURVE('',#301283,#301283,#301301,.T.); +#301301 = CIRCLE('',#301302,0.3); +#301302 = AXIS2_PLACEMENT_3D('',#301303,#301304,#301305); +#301303 = CARTESIAN_POINT('',(142.5,-121.25,0.)); +#301304 = DIRECTION('',(0.,0.,1.)); +#301305 = DIRECTION('',(1.,0.,-0.)); +#301306 = CYLINDRICAL_SURFACE('',#301307,0.3); +#301307 = AXIS2_PLACEMENT_3D('',#301308,#301309,#301310); +#301308 = CARTESIAN_POINT('',(142.5,-121.25,0.)); +#301309 = DIRECTION('',(0.,0.,1.)); +#301310 = DIRECTION('',(1.,0.,-0.)); +#301311 = ADVANCED_FACE('',(#301312),#301339,.F.); +#301312 = FACE_BOUND('',#301313,.F.); +#301313 = EDGE_LOOP('',(#301314,#301324,#301331,#301332)); +#301314 = ORIENTED_EDGE('',*,*,#301315,.T.); +#301315 = EDGE_CURVE('',#301316,#301318,#301320,.T.); +#301316 = VERTEX_POINT('',#301317); +#301317 = CARTESIAN_POINT('',(142.637255,-121.25,0.)); +#301318 = VERTEX_POINT('',#301319); +#301319 = CARTESIAN_POINT('',(142.637255,-121.25,-3.5E-02)); +#301320 = LINE('',#301321,#301322); +#301321 = CARTESIAN_POINT('',(142.637255,-121.25,0.)); +#301322 = VECTOR('',#301323,1.); +#301323 = DIRECTION('',(0.,0.,-1.)); +#301324 = ORIENTED_EDGE('',*,*,#301325,.T.); +#301325 = EDGE_CURVE('',#301318,#301318,#301326,.T.); +#301326 = CIRCLE('',#301327,0.137255); +#301327 = AXIS2_PLACEMENT_3D('',#301328,#301329,#301330); +#301328 = CARTESIAN_POINT('',(142.5,-121.25,-3.5E-02)); +#301329 = DIRECTION('',(0.,0.,1.)); +#301330 = DIRECTION('',(1.,0.,-0.)); +#301331 = ORIENTED_EDGE('',*,*,#301315,.F.); +#301332 = ORIENTED_EDGE('',*,*,#301333,.F.); +#301333 = EDGE_CURVE('',#301316,#301316,#301334,.T.); +#301334 = CIRCLE('',#301335,0.137255); +#301335 = AXIS2_PLACEMENT_3D('',#301336,#301337,#301338); +#301336 = CARTESIAN_POINT('',(142.5,-121.25,0.)); +#301337 = DIRECTION('',(0.,0.,1.)); +#301338 = DIRECTION('',(1.,0.,-0.)); +#301339 = CYLINDRICAL_SURFACE('',#301340,0.137255); +#301340 = AXIS2_PLACEMENT_3D('',#301341,#301342,#301343); +#301341 = CARTESIAN_POINT('',(142.5,-121.25,0.)); +#301342 = DIRECTION('',(0.,0.,1.)); +#301343 = DIRECTION('',(1.,0.,-0.)); +#301344 = ADVANCED_FACE('',(#301345,#301348),#301351,.F.); +#301345 = FACE_BOUND('',#301346,.T.); +#301346 = EDGE_LOOP('',(#301347)); +#301347 = ORIENTED_EDGE('',*,*,#301300,.T.); +#301348 = FACE_BOUND('',#301349,.F.); +#301349 = EDGE_LOOP('',(#301350)); +#301350 = ORIENTED_EDGE('',*,*,#301333,.T.); +#301351 = PLANE('',#301352); +#301352 = AXIS2_PLACEMENT_3D('',#301353,#301354,#301355); +#301353 = CARTESIAN_POINT('',(0.,0.,0.)); +#301354 = DIRECTION('',(-0.,-0.,-1.)); +#301355 = DIRECTION('',(-1.,0.,0.)); +#301356 = ADVANCED_FACE('',(#301357,#301360),#301363,.T.); +#301357 = FACE_BOUND('',#301358,.F.); +#301358 = EDGE_LOOP('',(#301359)); +#301359 = ORIENTED_EDGE('',*,*,#301292,.T.); +#301360 = FACE_BOUND('',#301361,.T.); +#301361 = EDGE_LOOP('',(#301362)); +#301362 = ORIENTED_EDGE('',*,*,#301325,.T.); +#301363 = PLANE('',#301364); +#301364 = AXIS2_PLACEMENT_3D('',#301365,#301366,#301367); +#301365 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#301366 = DIRECTION('',(-0.,-0.,-1.)); +#301367 = DIRECTION('',(-1.,0.,0.)); +#301368 = MANIFOLD_SOLID_BREP('',#301369); +#301369 = CLOSED_SHELL('',(#301370,#301403,#301436,#301448)); +#301370 = ADVANCED_FACE('',(#301371),#301398,.T.); +#301371 = FACE_BOUND('',#301372,.T.); +#301372 = EDGE_LOOP('',(#301373,#301383,#301390,#301391)); +#301373 = ORIENTED_EDGE('',*,*,#301374,.T.); +#301374 = EDGE_CURVE('',#301375,#301377,#301379,.T.); +#301375 = VERTEX_POINT('',#301376); +#301376 = CARTESIAN_POINT('',(152.8,-121.25,0.)); +#301377 = VERTEX_POINT('',#301378); +#301378 = CARTESIAN_POINT('',(152.8,-121.25,-3.5E-02)); +#301379 = LINE('',#301380,#301381); +#301380 = CARTESIAN_POINT('',(152.8,-121.25,0.)); +#301381 = VECTOR('',#301382,1.); +#301382 = DIRECTION('',(0.,0.,-1.)); +#301383 = ORIENTED_EDGE('',*,*,#301384,.T.); +#301384 = EDGE_CURVE('',#301377,#301377,#301385,.T.); +#301385 = CIRCLE('',#301386,0.3); +#301386 = AXIS2_PLACEMENT_3D('',#301387,#301388,#301389); +#301387 = CARTESIAN_POINT('',(152.5,-121.25,-3.5E-02)); +#301388 = DIRECTION('',(0.,0.,1.)); +#301389 = DIRECTION('',(1.,0.,-0.)); +#301390 = ORIENTED_EDGE('',*,*,#301374,.F.); +#301391 = ORIENTED_EDGE('',*,*,#301392,.F.); +#301392 = EDGE_CURVE('',#301375,#301375,#301393,.T.); +#301393 = CIRCLE('',#301394,0.3); +#301394 = AXIS2_PLACEMENT_3D('',#301395,#301396,#301397); +#301395 = CARTESIAN_POINT('',(152.5,-121.25,0.)); +#301396 = DIRECTION('',(0.,0.,1.)); +#301397 = DIRECTION('',(1.,0.,-0.)); +#301398 = CYLINDRICAL_SURFACE('',#301399,0.3); +#301399 = AXIS2_PLACEMENT_3D('',#301400,#301401,#301402); +#301400 = CARTESIAN_POINT('',(152.5,-121.25,0.)); +#301401 = DIRECTION('',(0.,0.,1.)); +#301402 = DIRECTION('',(1.,0.,-0.)); +#301403 = ADVANCED_FACE('',(#301404),#301431,.F.); +#301404 = FACE_BOUND('',#301405,.F.); +#301405 = EDGE_LOOP('',(#301406,#301416,#301423,#301424)); +#301406 = ORIENTED_EDGE('',*,*,#301407,.T.); +#301407 = EDGE_CURVE('',#301408,#301410,#301412,.T.); +#301408 = VERTEX_POINT('',#301409); +#301409 = CARTESIAN_POINT('',(152.637255,-121.25,0.)); +#301410 = VERTEX_POINT('',#301411); +#301411 = CARTESIAN_POINT('',(152.637255,-121.25,-3.5E-02)); +#301412 = LINE('',#301413,#301414); +#301413 = CARTESIAN_POINT('',(152.637255,-121.25,0.)); +#301414 = VECTOR('',#301415,1.); +#301415 = DIRECTION('',(0.,0.,-1.)); +#301416 = ORIENTED_EDGE('',*,*,#301417,.T.); +#301417 = EDGE_CURVE('',#301410,#301410,#301418,.T.); +#301418 = CIRCLE('',#301419,0.137255); +#301419 = AXIS2_PLACEMENT_3D('',#301420,#301421,#301422); +#301420 = CARTESIAN_POINT('',(152.5,-121.25,-3.5E-02)); +#301421 = DIRECTION('',(0.,0.,1.)); +#301422 = DIRECTION('',(1.,0.,-0.)); +#301423 = ORIENTED_EDGE('',*,*,#301407,.F.); +#301424 = ORIENTED_EDGE('',*,*,#301425,.F.); +#301425 = EDGE_CURVE('',#301408,#301408,#301426,.T.); +#301426 = CIRCLE('',#301427,0.137255); +#301427 = AXIS2_PLACEMENT_3D('',#301428,#301429,#301430); +#301428 = CARTESIAN_POINT('',(152.5,-121.25,0.)); +#301429 = DIRECTION('',(0.,0.,1.)); +#301430 = DIRECTION('',(1.,0.,-0.)); +#301431 = CYLINDRICAL_SURFACE('',#301432,0.137255); +#301432 = AXIS2_PLACEMENT_3D('',#301433,#301434,#301435); +#301433 = CARTESIAN_POINT('',(152.5,-121.25,0.)); +#301434 = DIRECTION('',(0.,0.,1.)); +#301435 = DIRECTION('',(1.,0.,-0.)); +#301436 = ADVANCED_FACE('',(#301437,#301440),#301443,.F.); +#301437 = FACE_BOUND('',#301438,.T.); +#301438 = EDGE_LOOP('',(#301439)); +#301439 = ORIENTED_EDGE('',*,*,#301392,.T.); +#301440 = FACE_BOUND('',#301441,.F.); +#301441 = EDGE_LOOP('',(#301442)); +#301442 = ORIENTED_EDGE('',*,*,#301425,.T.); +#301443 = PLANE('',#301444); +#301444 = AXIS2_PLACEMENT_3D('',#301445,#301446,#301447); +#301445 = CARTESIAN_POINT('',(0.,0.,0.)); +#301446 = DIRECTION('',(-0.,-0.,-1.)); +#301447 = DIRECTION('',(-1.,0.,0.)); +#301448 = ADVANCED_FACE('',(#301449,#301452),#301455,.T.); +#301449 = FACE_BOUND('',#301450,.F.); +#301450 = EDGE_LOOP('',(#301451)); +#301451 = ORIENTED_EDGE('',*,*,#301384,.T.); +#301452 = FACE_BOUND('',#301453,.T.); +#301453 = EDGE_LOOP('',(#301454)); +#301454 = ORIENTED_EDGE('',*,*,#301417,.T.); +#301455 = PLANE('',#301456); +#301456 = AXIS2_PLACEMENT_3D('',#301457,#301458,#301459); +#301457 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#301458 = DIRECTION('',(-0.,-0.,-1.)); +#301459 = DIRECTION('',(-1.,0.,0.)); +#301460 = MANIFOLD_SOLID_BREP('',#301461); +#301461 = CLOSED_SHELL('',(#301462,#301502,#301533,#301564,#301595, + #301626,#301657,#301688,#301719,#301750,#301781,#301812,#301845, + #301876,#301907,#301938,#301969,#302000,#302033,#302064,#302095, + #302126,#302157,#302188,#302221,#302243,#302276,#302309,#302348)); +#301462 = ADVANCED_FACE('',(#301463),#301497,.F.); +#301463 = FACE_BOUND('',#301464,.F.); +#301464 = EDGE_LOOP('',(#301465,#301475,#301483,#301491)); +#301465 = ORIENTED_EDGE('',*,*,#301466,.T.); +#301466 = EDGE_CURVE('',#301467,#301469,#301471,.T.); +#301467 = VERTEX_POINT('',#301468); +#301468 = CARTESIAN_POINT('',(133.290134,-117.828078,0.)); +#301469 = VERTEX_POINT('',#301470); +#301470 = CARTESIAN_POINT('',(133.290134,-117.828078,-3.5E-02)); +#301471 = LINE('',#301472,#301473); +#301472 = CARTESIAN_POINT('',(133.290134,-117.828078,0.)); +#301473 = VECTOR('',#301474,1.); +#301474 = DIRECTION('',(0.,0.,-1.)); +#301475 = ORIENTED_EDGE('',*,*,#301476,.T.); +#301476 = EDGE_CURVE('',#301469,#301477,#301479,.T.); +#301477 = VERTEX_POINT('',#301478); +#301478 = CARTESIAN_POINT('',(133.533147,-118.073809,-3.5E-02)); +#301479 = LINE('',#301480,#301481); +#301480 = CARTESIAN_POINT('',(133.290134,-117.828078,-3.5E-02)); +#301481 = VECTOR('',#301482,1.); +#301482 = DIRECTION('',(0.703163550246,-0.711028144032,0.)); +#301483 = ORIENTED_EDGE('',*,*,#301484,.F.); +#301484 = EDGE_CURVE('',#301485,#301477,#301487,.T.); +#301485 = VERTEX_POINT('',#301486); +#301486 = CARTESIAN_POINT('',(133.533147,-118.073809,0.)); +#301487 = LINE('',#301488,#301489); +#301488 = CARTESIAN_POINT('',(133.533147,-118.073809,0.)); +#301489 = VECTOR('',#301490,1.); +#301490 = DIRECTION('',(0.,0.,-1.)); +#301491 = ORIENTED_EDGE('',*,*,#301492,.F.); +#301492 = EDGE_CURVE('',#301467,#301485,#301493,.T.); +#301493 = LINE('',#301494,#301495); +#301494 = CARTESIAN_POINT('',(133.290134,-117.828078,0.)); +#301495 = VECTOR('',#301496,1.); +#301496 = DIRECTION('',(0.703163550246,-0.711028144032,0.)); +#301497 = PLANE('',#301498); +#301498 = AXIS2_PLACEMENT_3D('',#301499,#301500,#301501); +#301499 = CARTESIAN_POINT('',(133.290134,-117.828078,0.)); +#301500 = DIRECTION('',(-0.711028144032,-0.703163550246,-0.)); +#301501 = DIRECTION('',(0.703163550246,-0.711028144032,0.)); +#301502 = ADVANCED_FACE('',(#301503),#301528,.F.); +#301503 = FACE_BOUND('',#301504,.F.); +#301504 = EDGE_LOOP('',(#301505,#301506,#301514,#301522)); +#301505 = ORIENTED_EDGE('',*,*,#301484,.T.); +#301506 = ORIENTED_EDGE('',*,*,#301507,.T.); +#301507 = EDGE_CURVE('',#301477,#301508,#301510,.T.); +#301508 = VERTEX_POINT('',#301509); +#301509 = CARTESIAN_POINT('',(133.548079,-118.109857,-3.5E-02)); +#301510 = LINE('',#301511,#301512); +#301511 = CARTESIAN_POINT('',(133.533147,-118.073809,-3.5E-02)); +#301512 = VECTOR('',#301513,1.); +#301513 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#301514 = ORIENTED_EDGE('',*,*,#301515,.F.); +#301515 = EDGE_CURVE('',#301516,#301508,#301518,.T.); +#301516 = VERTEX_POINT('',#301517); +#301517 = CARTESIAN_POINT('',(133.548079,-118.109857,0.)); +#301518 = LINE('',#301519,#301520); +#301519 = CARTESIAN_POINT('',(133.548079,-118.109857,0.)); +#301520 = VECTOR('',#301521,1.); +#301521 = DIRECTION('',(0.,0.,-1.)); +#301522 = ORIENTED_EDGE('',*,*,#301523,.F.); +#301523 = EDGE_CURVE('',#301485,#301516,#301524,.T.); +#301524 = LINE('',#301525,#301526); +#301525 = CARTESIAN_POINT('',(133.533147,-118.073809,0.)); +#301526 = VECTOR('',#301527,1.); +#301527 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#301528 = PLANE('',#301529); +#301529 = AXIS2_PLACEMENT_3D('',#301530,#301531,#301532); +#301530 = CARTESIAN_POINT('',(133.533147,-118.073809,0.)); +#301531 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#301532 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#301533 = ADVANCED_FACE('',(#301534),#301559,.F.); +#301534 = FACE_BOUND('',#301535,.F.); +#301535 = EDGE_LOOP('',(#301536,#301537,#301545,#301553)); +#301536 = ORIENTED_EDGE('',*,*,#301515,.T.); +#301537 = ORIENTED_EDGE('',*,*,#301538,.T.); +#301538 = EDGE_CURVE('',#301508,#301539,#301541,.T.); +#301539 = VERTEX_POINT('',#301540); +#301540 = CARTESIAN_POINT('',(133.548079,-118.705906,-3.5E-02)); +#301541 = LINE('',#301542,#301543); +#301542 = CARTESIAN_POINT('',(133.548079,-118.109857,-3.5E-02)); +#301543 = VECTOR('',#301544,1.); +#301544 = DIRECTION('',(0.,-1.,0.)); +#301545 = ORIENTED_EDGE('',*,*,#301546,.F.); +#301546 = EDGE_CURVE('',#301547,#301539,#301549,.T.); +#301547 = VERTEX_POINT('',#301548); +#301548 = CARTESIAN_POINT('',(133.548079,-118.705906,0.)); +#301549 = LINE('',#301550,#301551); +#301550 = CARTESIAN_POINT('',(133.548079,-118.705906,0.)); +#301551 = VECTOR('',#301552,1.); +#301552 = DIRECTION('',(0.,0.,-1.)); +#301553 = ORIENTED_EDGE('',*,*,#301554,.F.); +#301554 = EDGE_CURVE('',#301516,#301547,#301555,.T.); +#301555 = LINE('',#301556,#301557); +#301556 = CARTESIAN_POINT('',(133.548079,-118.109857,0.)); +#301557 = VECTOR('',#301558,1.); +#301558 = DIRECTION('',(0.,-1.,0.)); +#301559 = PLANE('',#301560); +#301560 = AXIS2_PLACEMENT_3D('',#301561,#301562,#301563); +#301561 = CARTESIAN_POINT('',(133.548079,-118.109857,0.)); +#301562 = DIRECTION('',(-1.,-0.,-0.)); +#301563 = DIRECTION('',(0.,-1.,0.)); +#301564 = ADVANCED_FACE('',(#301565),#301590,.F.); +#301565 = FACE_BOUND('',#301566,.F.); +#301566 = EDGE_LOOP('',(#301567,#301568,#301576,#301584)); +#301567 = ORIENTED_EDGE('',*,*,#301546,.T.); +#301568 = ORIENTED_EDGE('',*,*,#301569,.T.); +#301569 = EDGE_CURVE('',#301539,#301570,#301572,.T.); +#301570 = VERTEX_POINT('',#301571); +#301571 = CARTESIAN_POINT('',(133.533148,-118.741954,-3.5E-02)); +#301572 = LINE('',#301573,#301574); +#301573 = CARTESIAN_POINT('',(133.548079,-118.705906,-3.5E-02)); +#301574 = VECTOR('',#301575,1.); +#301575 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#301576 = ORIENTED_EDGE('',*,*,#301577,.F.); +#301577 = EDGE_CURVE('',#301578,#301570,#301580,.T.); +#301578 = VERTEX_POINT('',#301579); +#301579 = CARTESIAN_POINT('',(133.533148,-118.741954,0.)); +#301580 = LINE('',#301581,#301582); +#301581 = CARTESIAN_POINT('',(133.533148,-118.741954,0.)); +#301582 = VECTOR('',#301583,1.); +#301583 = DIRECTION('',(0.,0.,-1.)); +#301584 = ORIENTED_EDGE('',*,*,#301585,.F.); +#301585 = EDGE_CURVE('',#301547,#301578,#301586,.T.); +#301586 = LINE('',#301587,#301588); +#301587 = CARTESIAN_POINT('',(133.548079,-118.705906,0.)); +#301588 = VECTOR('',#301589,1.); +#301589 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#301590 = PLANE('',#301591); +#301591 = AXIS2_PLACEMENT_3D('',#301592,#301593,#301594); +#301592 = CARTESIAN_POINT('',(133.548079,-118.705906,0.)); +#301593 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#301594 = DIRECTION('',(-0.382670952168,-0.923884701879,0.)); +#301595 = ADVANCED_FACE('',(#301596),#301621,.F.); +#301596 = FACE_BOUND('',#301597,.F.); +#301597 = EDGE_LOOP('',(#301598,#301599,#301607,#301615)); +#301598 = ORIENTED_EDGE('',*,*,#301577,.T.); +#301599 = ORIENTED_EDGE('',*,*,#301600,.T.); +#301600 = EDGE_CURVE('',#301570,#301601,#301603,.T.); +#301601 = VERTEX_POINT('',#301602); +#301602 = CARTESIAN_POINT('',(133.277818,-119.,-3.5E-02)); +#301603 = LINE('',#301604,#301605); +#301604 = CARTESIAN_POINT('',(133.533148,-118.741954,-3.5E-02)); +#301605 = VECTOR('',#301606,1.); +#301606 = DIRECTION('',(-0.703356011354,-0.710837760176,0.)); +#301607 = ORIENTED_EDGE('',*,*,#301608,.F.); +#301608 = EDGE_CURVE('',#301609,#301601,#301611,.T.); +#301609 = VERTEX_POINT('',#301610); +#301610 = CARTESIAN_POINT('',(133.277818,-119.,0.)); +#301611 = LINE('',#301612,#301613); +#301612 = CARTESIAN_POINT('',(133.277818,-119.,0.)); +#301613 = VECTOR('',#301614,1.); +#301614 = DIRECTION('',(0.,0.,-1.)); +#301615 = ORIENTED_EDGE('',*,*,#301616,.F.); +#301616 = EDGE_CURVE('',#301578,#301609,#301617,.T.); +#301617 = LINE('',#301618,#301619); +#301618 = CARTESIAN_POINT('',(133.533148,-118.741954,0.)); +#301619 = VECTOR('',#301620,1.); +#301620 = DIRECTION('',(-0.703356011354,-0.710837760176,0.)); +#301621 = PLANE('',#301622); +#301622 = AXIS2_PLACEMENT_3D('',#301623,#301624,#301625); +#301623 = CARTESIAN_POINT('',(133.533148,-118.741954,0.)); +#301624 = DIRECTION('',(-0.710837760176,0.703356011354,0.)); +#301625 = DIRECTION('',(-0.703356011354,-0.710837760176,0.)); +#301626 = ADVANCED_FACE('',(#301627),#301652,.F.); +#301627 = FACE_BOUND('',#301628,.F.); +#301628 = EDGE_LOOP('',(#301629,#301630,#301638,#301646)); +#301629 = ORIENTED_EDGE('',*,*,#301608,.T.); +#301630 = ORIENTED_EDGE('',*,*,#301631,.T.); +#301631 = EDGE_CURVE('',#301601,#301632,#301634,.T.); +#301632 = VERTEX_POINT('',#301633); +#301633 = CARTESIAN_POINT('',(133.533148,-119.258046,-3.5E-02)); +#301634 = LINE('',#301635,#301636); +#301635 = CARTESIAN_POINT('',(133.277818,-119.,-3.5E-02)); +#301636 = VECTOR('',#301637,1.); +#301637 = DIRECTION('',(0.703356011354,-0.710837760176,0.)); +#301638 = ORIENTED_EDGE('',*,*,#301639,.F.); +#301639 = EDGE_CURVE('',#301640,#301632,#301642,.T.); +#301640 = VERTEX_POINT('',#301641); +#301641 = CARTESIAN_POINT('',(133.533148,-119.258046,0.)); +#301642 = LINE('',#301643,#301644); +#301643 = CARTESIAN_POINT('',(133.533148,-119.258046,0.)); +#301644 = VECTOR('',#301645,1.); +#301645 = DIRECTION('',(0.,0.,-1.)); +#301646 = ORIENTED_EDGE('',*,*,#301647,.F.); +#301647 = EDGE_CURVE('',#301609,#301640,#301648,.T.); +#301648 = LINE('',#301649,#301650); +#301649 = CARTESIAN_POINT('',(133.277818,-119.,0.)); +#301650 = VECTOR('',#301651,1.); +#301651 = DIRECTION('',(0.703356011354,-0.710837760176,0.)); +#301652 = PLANE('',#301653); +#301653 = AXIS2_PLACEMENT_3D('',#301654,#301655,#301656); +#301654 = CARTESIAN_POINT('',(133.277818,-119.,0.)); +#301655 = DIRECTION('',(-0.710837760176,-0.703356011354,-0.)); +#301656 = DIRECTION('',(0.703356011354,-0.710837760176,0.)); +#301657 = ADVANCED_FACE('',(#301658),#301683,.F.); +#301658 = FACE_BOUND('',#301659,.F.); +#301659 = EDGE_LOOP('',(#301660,#301661,#301669,#301677)); +#301660 = ORIENTED_EDGE('',*,*,#301639,.T.); +#301661 = ORIENTED_EDGE('',*,*,#301662,.T.); +#301662 = EDGE_CURVE('',#301632,#301663,#301665,.T.); +#301663 = VERTEX_POINT('',#301664); +#301664 = CARTESIAN_POINT('',(133.548079,-119.294094,-3.5E-02)); +#301665 = LINE('',#301666,#301667); +#301666 = CARTESIAN_POINT('',(133.533148,-119.258046,-3.5E-02)); +#301667 = VECTOR('',#301668,1.); +#301668 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#301669 = ORIENTED_EDGE('',*,*,#301670,.F.); +#301670 = EDGE_CURVE('',#301671,#301663,#301673,.T.); +#301671 = VERTEX_POINT('',#301672); +#301672 = CARTESIAN_POINT('',(133.548079,-119.294094,0.)); +#301673 = LINE('',#301674,#301675); +#301674 = CARTESIAN_POINT('',(133.548079,-119.294094,0.)); +#301675 = VECTOR('',#301676,1.); +#301676 = DIRECTION('',(0.,0.,-1.)); +#301677 = ORIENTED_EDGE('',*,*,#301678,.F.); +#301678 = EDGE_CURVE('',#301640,#301671,#301679,.T.); +#301679 = LINE('',#301680,#301681); +#301680 = CARTESIAN_POINT('',(133.533148,-119.258046,0.)); +#301681 = VECTOR('',#301682,1.); +#301682 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#301683 = PLANE('',#301684); +#301684 = AXIS2_PLACEMENT_3D('',#301685,#301686,#301687); +#301685 = CARTESIAN_POINT('',(133.533148,-119.258046,0.)); +#301686 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#301687 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#301688 = ADVANCED_FACE('',(#301689),#301714,.F.); +#301689 = FACE_BOUND('',#301690,.F.); +#301690 = EDGE_LOOP('',(#301691,#301692,#301700,#301708)); +#301691 = ORIENTED_EDGE('',*,*,#301670,.T.); +#301692 = ORIENTED_EDGE('',*,*,#301693,.T.); +#301693 = EDGE_CURVE('',#301663,#301694,#301696,.T.); +#301694 = VERTEX_POINT('',#301695); +#301695 = CARTESIAN_POINT('',(133.548079,-120.090143,-3.5E-02)); +#301696 = LINE('',#301697,#301698); +#301697 = CARTESIAN_POINT('',(133.548079,-119.294094,-3.5E-02)); +#301698 = VECTOR('',#301699,1.); +#301699 = DIRECTION('',(0.,-1.,0.)); +#301700 = ORIENTED_EDGE('',*,*,#301701,.F.); +#301701 = EDGE_CURVE('',#301702,#301694,#301704,.T.); +#301702 = VERTEX_POINT('',#301703); +#301703 = CARTESIAN_POINT('',(133.548079,-120.090143,0.)); +#301704 = LINE('',#301705,#301706); +#301705 = CARTESIAN_POINT('',(133.548079,-120.090143,0.)); +#301706 = VECTOR('',#301707,1.); +#301707 = DIRECTION('',(0.,0.,-1.)); +#301708 = ORIENTED_EDGE('',*,*,#301709,.F.); +#301709 = EDGE_CURVE('',#301671,#301702,#301710,.T.); +#301710 = LINE('',#301711,#301712); +#301711 = CARTESIAN_POINT('',(133.548079,-119.294094,0.)); +#301712 = VECTOR('',#301713,1.); +#301713 = DIRECTION('',(0.,-1.,0.)); +#301714 = PLANE('',#301715); +#301715 = AXIS2_PLACEMENT_3D('',#301716,#301717,#301718); +#301716 = CARTESIAN_POINT('',(133.548079,-119.294094,0.)); +#301717 = DIRECTION('',(-1.,-0.,-0.)); +#301718 = DIRECTION('',(0.,-1.,0.)); +#301719 = ADVANCED_FACE('',(#301720),#301745,.F.); +#301720 = FACE_BOUND('',#301721,.F.); +#301721 = EDGE_LOOP('',(#301722,#301723,#301731,#301739)); +#301722 = ORIENTED_EDGE('',*,*,#301701,.T.); +#301723 = ORIENTED_EDGE('',*,*,#301724,.T.); +#301724 = EDGE_CURVE('',#301694,#301725,#301727,.T.); +#301725 = VERTEX_POINT('',#301726); +#301726 = CARTESIAN_POINT('',(133.533147,-120.126192,-3.5E-02)); +#301727 = LINE('',#301728,#301729); +#301728 = CARTESIAN_POINT('',(133.548079,-120.090143,-3.5E-02)); +#301729 = VECTOR('',#301730,1.); +#301730 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#301731 = ORIENTED_EDGE('',*,*,#301732,.F.); +#301732 = EDGE_CURVE('',#301733,#301725,#301735,.T.); +#301733 = VERTEX_POINT('',#301734); +#301734 = CARTESIAN_POINT('',(133.533147,-120.126192,0.)); +#301735 = LINE('',#301736,#301737); +#301736 = CARTESIAN_POINT('',(133.533147,-120.126192,0.)); +#301737 = VECTOR('',#301738,1.); +#301738 = DIRECTION('',(0.,0.,-1.)); +#301739 = ORIENTED_EDGE('',*,*,#301740,.F.); +#301740 = EDGE_CURVE('',#301702,#301733,#301741,.T.); +#301741 = LINE('',#301742,#301743); +#301742 = CARTESIAN_POINT('',(133.548079,-120.090143,0.)); +#301743 = VECTOR('',#301744,1.); +#301744 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#301745 = PLANE('',#301746); +#301746 = AXIS2_PLACEMENT_3D('',#301747,#301748,#301749); +#301747 = CARTESIAN_POINT('',(133.548079,-120.090143,0.)); +#301748 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#301749 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#301750 = ADVANCED_FACE('',(#301751),#301776,.F.); +#301751 = FACE_BOUND('',#301752,.F.); +#301752 = EDGE_LOOP('',(#301753,#301754,#301762,#301770)); +#301753 = ORIENTED_EDGE('',*,*,#301732,.T.); +#301754 = ORIENTED_EDGE('',*,*,#301755,.T.); +#301755 = EDGE_CURVE('',#301725,#301756,#301758,.T.); +#301756 = VERTEX_POINT('',#301757); +#301757 = CARTESIAN_POINT('',(133.290134,-120.371921,-3.5E-02)); +#301758 = LINE('',#301759,#301760); +#301759 = CARTESIAN_POINT('',(133.533147,-120.126192,-3.5E-02)); +#301760 = VECTOR('',#301761,1.); +#301761 = DIRECTION('',(-0.703166443596,-0.711025282673,0.)); +#301762 = ORIENTED_EDGE('',*,*,#301763,.F.); +#301763 = EDGE_CURVE('',#301764,#301756,#301766,.T.); +#301764 = VERTEX_POINT('',#301765); +#301765 = CARTESIAN_POINT('',(133.290134,-120.371921,0.)); +#301766 = LINE('',#301767,#301768); +#301767 = CARTESIAN_POINT('',(133.290134,-120.371921,0.)); +#301768 = VECTOR('',#301769,1.); +#301769 = DIRECTION('',(0.,0.,-1.)); +#301770 = ORIENTED_EDGE('',*,*,#301771,.F.); +#301771 = EDGE_CURVE('',#301733,#301764,#301772,.T.); +#301772 = LINE('',#301773,#301774); +#301773 = CARTESIAN_POINT('',(133.533147,-120.126192,0.)); +#301774 = VECTOR('',#301775,1.); +#301775 = DIRECTION('',(-0.703166443596,-0.711025282673,0.)); +#301776 = PLANE('',#301777); +#301777 = AXIS2_PLACEMENT_3D('',#301778,#301779,#301780); +#301778 = CARTESIAN_POINT('',(133.533147,-120.126192,0.)); +#301779 = DIRECTION('',(-0.711025282673,0.703166443596,0.)); +#301780 = DIRECTION('',(-0.703166443596,-0.711025282673,0.)); +#301781 = ADVANCED_FACE('',(#301782),#301807,.F.); +#301782 = FACE_BOUND('',#301783,.F.); +#301783 = EDGE_LOOP('',(#301784,#301785,#301793,#301801)); +#301784 = ORIENTED_EDGE('',*,*,#301763,.T.); +#301785 = ORIENTED_EDGE('',*,*,#301786,.T.); +#301786 = EDGE_CURVE('',#301756,#301787,#301789,.T.); +#301787 = VERTEX_POINT('',#301788); +#301788 = CARTESIAN_POINT('',(133.297798,-120.385195,-3.5E-02)); +#301789 = LINE('',#301790,#301791); +#301790 = CARTESIAN_POINT('',(133.290134,-120.371921,-3.5E-02)); +#301791 = VECTOR('',#301792,1.); +#301792 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#301793 = ORIENTED_EDGE('',*,*,#301794,.F.); +#301794 = EDGE_CURVE('',#301795,#301787,#301797,.T.); +#301795 = VERTEX_POINT('',#301796); +#301796 = CARTESIAN_POINT('',(133.297798,-120.385195,0.)); +#301797 = LINE('',#301798,#301799); +#301798 = CARTESIAN_POINT('',(133.297798,-120.385195,0.)); +#301799 = VECTOR('',#301800,1.); +#301800 = DIRECTION('',(0.,0.,-1.)); +#301801 = ORIENTED_EDGE('',*,*,#301802,.F.); +#301802 = EDGE_CURVE('',#301764,#301795,#301803,.T.); +#301803 = LINE('',#301804,#301805); +#301804 = CARTESIAN_POINT('',(133.290134,-120.371921,0.)); +#301805 = VECTOR('',#301806,1.); +#301806 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#301807 = PLANE('',#301808); +#301808 = AXIS2_PLACEMENT_3D('',#301809,#301810,#301811); +#301809 = CARTESIAN_POINT('',(133.290134,-120.371921,0.)); +#301810 = DIRECTION('',(-0.866018269693,-0.500012356406,-0.)); +#301811 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#301812 = ADVANCED_FACE('',(#301813),#301840,.T.); +#301813 = FACE_BOUND('',#301814,.F.); +#301814 = EDGE_LOOP('',(#301815,#301816,#301825,#301833)); +#301815 = ORIENTED_EDGE('',*,*,#301794,.T.); +#301816 = ORIENTED_EDGE('',*,*,#301817,.T.); +#301817 = EDGE_CURVE('',#301787,#301818,#301820,.T.); +#301818 = VERTEX_POINT('',#301819); +#301819 = CARTESIAN_POINT('',(133.135439,-120.222836,-3.5E-02)); +#301820 = CIRCLE('',#301821,0.299999934501); +#301821 = AXIS2_PLACEMENT_3D('',#301822,#301823,#301824); +#301822 = CARTESIAN_POINT('',(133.02063414059,-120.4999998594,-3.5E-02) + ); +#301823 = DIRECTION('',(0.,0.,-1.)); +#301824 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#301825 = ORIENTED_EDGE('',*,*,#301826,.F.); +#301826 = EDGE_CURVE('',#301827,#301818,#301829,.T.); +#301827 = VERTEX_POINT('',#301828); +#301828 = CARTESIAN_POINT('',(133.135439,-120.222836,0.)); +#301829 = LINE('',#301830,#301831); +#301830 = CARTESIAN_POINT('',(133.135439,-120.222836,0.)); +#301831 = VECTOR('',#301832,1.); +#301832 = DIRECTION('',(0.,0.,-1.)); +#301833 = ORIENTED_EDGE('',*,*,#301834,.F.); +#301834 = EDGE_CURVE('',#301795,#301827,#301835,.T.); +#301835 = CIRCLE('',#301836,0.299999934501); +#301836 = AXIS2_PLACEMENT_3D('',#301837,#301838,#301839); +#301837 = CARTESIAN_POINT('',(133.02063414059,-120.4999998594,0.)); +#301838 = DIRECTION('',(0.,0.,-1.)); +#301839 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#301840 = CYLINDRICAL_SURFACE('',#301841,0.299999934501); +#301841 = AXIS2_PLACEMENT_3D('',#301842,#301843,#301844); +#301842 = CARTESIAN_POINT('',(133.02063414059,-120.4999998594,0.)); +#301843 = DIRECTION('',(-0.,-0.,1.)); +#301844 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#301845 = ADVANCED_FACE('',(#301846),#301871,.F.); +#301846 = FACE_BOUND('',#301847,.F.); +#301847 = EDGE_LOOP('',(#301848,#301849,#301857,#301865)); +#301848 = ORIENTED_EDGE('',*,*,#301826,.T.); +#301849 = ORIENTED_EDGE('',*,*,#301850,.T.); +#301850 = EDGE_CURVE('',#301818,#301851,#301853,.T.); +#301851 = VERTEX_POINT('',#301852); +#301852 = CARTESIAN_POINT('',(133.148712,-120.230499,-3.5E-02)); +#301853 = LINE('',#301854,#301855); +#301854 = CARTESIAN_POINT('',(133.135439,-120.222836,-3.5E-02)); +#301855 = VECTOR('',#301856,1.); +#301856 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#301857 = ORIENTED_EDGE('',*,*,#301858,.F.); +#301858 = EDGE_CURVE('',#301859,#301851,#301861,.T.); +#301859 = VERTEX_POINT('',#301860); +#301860 = CARTESIAN_POINT('',(133.148712,-120.230499,0.)); +#301861 = LINE('',#301862,#301863); +#301862 = CARTESIAN_POINT('',(133.148712,-120.230499,0.)); +#301863 = VECTOR('',#301864,1.); +#301864 = DIRECTION('',(0.,0.,-1.)); +#301865 = ORIENTED_EDGE('',*,*,#301866,.F.); +#301866 = EDGE_CURVE('',#301827,#301859,#301867,.T.); +#301867 = LINE('',#301868,#301869); +#301868 = CARTESIAN_POINT('',(133.135439,-120.222836,0.)); +#301869 = VECTOR('',#301870,1.); +#301870 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#301871 = PLANE('',#301872); +#301872 = AXIS2_PLACEMENT_3D('',#301873,#301874,#301875); +#301873 = CARTESIAN_POINT('',(133.135439,-120.222836,0.)); +#301874 = DIRECTION('',(-0.499991674902,-0.866030210229,-0.)); +#301875 = DIRECTION('',(0.866030210229,-0.499991674902,0.)); +#301876 = ADVANCED_FACE('',(#301877),#301902,.F.); +#301877 = FACE_BOUND('',#301878,.F.); +#301878 = EDGE_LOOP('',(#301879,#301880,#301888,#301896)); +#301879 = ORIENTED_EDGE('',*,*,#301858,.T.); +#301880 = ORIENTED_EDGE('',*,*,#301881,.T.); +#301881 = EDGE_CURVE('',#301851,#301882,#301884,.T.); +#301882 = VERTEX_POINT('',#301883); +#301883 = CARTESIAN_POINT('',(133.35,-120.029212,-3.5E-02)); +#301884 = LINE('',#301885,#301886); +#301885 = CARTESIAN_POINT('',(133.148712,-120.230499,-3.5E-02)); +#301886 = VECTOR('',#301887,1.); +#301887 = DIRECTION('',(0.707108537644,0.707105024725,0.)); +#301888 = ORIENTED_EDGE('',*,*,#301889,.F.); +#301889 = EDGE_CURVE('',#301890,#301882,#301892,.T.); +#301890 = VERTEX_POINT('',#301891); +#301891 = CARTESIAN_POINT('',(133.35,-120.029212,0.)); +#301892 = LINE('',#301893,#301894); +#301893 = CARTESIAN_POINT('',(133.35,-120.029212,0.)); +#301894 = VECTOR('',#301895,1.); +#301895 = DIRECTION('',(0.,0.,-1.)); +#301896 = ORIENTED_EDGE('',*,*,#301897,.F.); +#301897 = EDGE_CURVE('',#301859,#301890,#301898,.T.); +#301898 = LINE('',#301899,#301900); +#301899 = CARTESIAN_POINT('',(133.148712,-120.230499,0.)); +#301900 = VECTOR('',#301901,1.); +#301901 = DIRECTION('',(0.707108537644,0.707105024725,0.)); +#301902 = PLANE('',#301903); +#301903 = AXIS2_PLACEMENT_3D('',#301904,#301905,#301906); +#301904 = CARTESIAN_POINT('',(133.148712,-120.230499,0.)); +#301905 = DIRECTION('',(0.707105024725,-0.707108537644,0.)); +#301906 = DIRECTION('',(0.707108537644,0.707105024725,0.)); +#301907 = ADVANCED_FACE('',(#301908),#301933,.F.); +#301908 = FACE_BOUND('',#301909,.F.); +#301909 = EDGE_LOOP('',(#301910,#301911,#301919,#301927)); +#301910 = ORIENTED_EDGE('',*,*,#301889,.T.); +#301911 = ORIENTED_EDGE('',*,*,#301912,.T.); +#301912 = EDGE_CURVE('',#301882,#301913,#301915,.T.); +#301913 = VERTEX_POINT('',#301914); +#301914 = CARTESIAN_POINT('',(133.35,-119.355024,-3.5E-02)); +#301915 = LINE('',#301916,#301917); +#301916 = CARTESIAN_POINT('',(133.35,-120.029212,-3.5E-02)); +#301917 = VECTOR('',#301918,1.); +#301918 = DIRECTION('',(0.,1.,0.)); +#301919 = ORIENTED_EDGE('',*,*,#301920,.F.); +#301920 = EDGE_CURVE('',#301921,#301913,#301923,.T.); +#301921 = VERTEX_POINT('',#301922); +#301922 = CARTESIAN_POINT('',(133.35,-119.355024,0.)); +#301923 = LINE('',#301924,#301925); +#301924 = CARTESIAN_POINT('',(133.35,-119.355024,0.)); +#301925 = VECTOR('',#301926,1.); +#301926 = DIRECTION('',(0.,0.,-1.)); +#301927 = ORIENTED_EDGE('',*,*,#301928,.F.); +#301928 = EDGE_CURVE('',#301890,#301921,#301929,.T.); +#301929 = LINE('',#301930,#301931); +#301930 = CARTESIAN_POINT('',(133.35,-120.029212,0.)); +#301931 = VECTOR('',#301932,1.); +#301932 = DIRECTION('',(0.,1.,0.)); +#301933 = PLANE('',#301934); +#301934 = AXIS2_PLACEMENT_3D('',#301935,#301936,#301937); +#301935 = CARTESIAN_POINT('',(133.35,-120.029212,0.)); +#301936 = DIRECTION('',(1.,-0.,0.)); +#301937 = DIRECTION('',(0.,1.,0.)); +#301938 = ADVANCED_FACE('',(#301939),#301964,.F.); +#301939 = FACE_BOUND('',#301940,.F.); +#301940 = EDGE_LOOP('',(#301941,#301942,#301950,#301958)); +#301941 = ORIENTED_EDGE('',*,*,#301920,.T.); +#301942 = ORIENTED_EDGE('',*,*,#301943,.T.); +#301943 = EDGE_CURVE('',#301913,#301944,#301946,.T.); +#301944 = VERTEX_POINT('',#301945); +#301945 = CARTESIAN_POINT('',(133.094975,-119.1,-3.5E-02)); +#301946 = LINE('',#301947,#301948); +#301947 = CARTESIAN_POINT('',(133.35,-119.355024,-3.5E-02)); +#301948 = VECTOR('',#301949,1.); +#301949 = DIRECTION('',(-0.707108167536,0.707105394835,0.)); +#301950 = ORIENTED_EDGE('',*,*,#301951,.F.); +#301951 = EDGE_CURVE('',#301952,#301944,#301954,.T.); +#301952 = VERTEX_POINT('',#301953); +#301953 = CARTESIAN_POINT('',(133.094975,-119.1,0.)); +#301954 = LINE('',#301955,#301956); +#301955 = CARTESIAN_POINT('',(133.094975,-119.1,0.)); +#301956 = VECTOR('',#301957,1.); +#301957 = DIRECTION('',(0.,0.,-1.)); +#301958 = ORIENTED_EDGE('',*,*,#301959,.F.); +#301959 = EDGE_CURVE('',#301921,#301952,#301960,.T.); +#301960 = LINE('',#301961,#301962); +#301961 = CARTESIAN_POINT('',(133.35,-119.355024,0.)); +#301962 = VECTOR('',#301963,1.); +#301963 = DIRECTION('',(-0.707108167536,0.707105394835,0.)); +#301964 = PLANE('',#301965); +#301965 = AXIS2_PLACEMENT_3D('',#301966,#301967,#301968); +#301966 = CARTESIAN_POINT('',(133.35,-119.355024,0.)); +#301967 = DIRECTION('',(0.707105394835,0.707108167536,0.)); +#301968 = DIRECTION('',(-0.707108167536,0.707105394835,0.)); +#301969 = ADVANCED_FACE('',(#301970),#301995,.F.); +#301970 = FACE_BOUND('',#301971,.F.); +#301971 = EDGE_LOOP('',(#301972,#301973,#301981,#301989)); +#301972 = ORIENTED_EDGE('',*,*,#301951,.T.); +#301973 = ORIENTED_EDGE('',*,*,#301974,.T.); +#301974 = EDGE_CURVE('',#301944,#301975,#301977,.T.); +#301975 = VERTEX_POINT('',#301976); +#301976 = CARTESIAN_POINT('',(132.980491,-119.098079,-3.5E-02)); +#301977 = LINE('',#301978,#301979); +#301978 = CARTESIAN_POINT('',(133.094975,-119.1,-3.5E-02)); +#301979 = VECTOR('',#301980,1.); +#301980 = DIRECTION('',(-0.999859251606,1.67772756222E-02,0.)); +#301981 = ORIENTED_EDGE('',*,*,#301982,.F.); +#301982 = EDGE_CURVE('',#301983,#301975,#301985,.T.); +#301983 = VERTEX_POINT('',#301984); +#301984 = CARTESIAN_POINT('',(132.980491,-119.098079,0.)); +#301985 = LINE('',#301986,#301987); +#301986 = CARTESIAN_POINT('',(132.980491,-119.098079,0.)); +#301987 = VECTOR('',#301988,1.); +#301988 = DIRECTION('',(0.,0.,-1.)); +#301989 = ORIENTED_EDGE('',*,*,#301990,.F.); +#301990 = EDGE_CURVE('',#301952,#301983,#301991,.T.); +#301991 = LINE('',#301992,#301993); +#301992 = CARTESIAN_POINT('',(133.094975,-119.1,0.)); +#301993 = VECTOR('',#301994,1.); +#301994 = DIRECTION('',(-0.999859251606,1.67772756222E-02,0.)); +#301995 = PLANE('',#301996); +#301996 = AXIS2_PLACEMENT_3D('',#301997,#301998,#301999); +#301997 = CARTESIAN_POINT('',(133.094975,-119.1,0.)); +#301998 = DIRECTION('',(1.67772756222E-02,0.999859251606,0.)); +#301999 = DIRECTION('',(-0.999859251606,1.67772756222E-02,0.)); +#302000 = ADVANCED_FACE('',(#302001),#302028,.T.); +#302001 = FACE_BOUND('',#302002,.F.); +#302002 = EDGE_LOOP('',(#302003,#302004,#302013,#302021)); +#302003 = ORIENTED_EDGE('',*,*,#301982,.T.); +#302004 = ORIENTED_EDGE('',*,*,#302005,.T.); +#302005 = EDGE_CURVE('',#301975,#302006,#302008,.T.); +#302006 = VERTEX_POINT('',#302007); +#302007 = CARTESIAN_POINT('',(132.980491,-118.901921,-3.5E-02)); +#302008 = CIRCLE('',#302009,0.100000456609); +#302009 = AXIS2_PLACEMENT_3D('',#302010,#302011,#302012); +#302010 = CARTESIAN_POINT('',(133.,-119.,-3.5E-02)); +#302011 = DIRECTION('',(0.,0.,-1.)); +#302012 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#302013 = ORIENTED_EDGE('',*,*,#302014,.F.); +#302014 = EDGE_CURVE('',#302015,#302006,#302017,.T.); +#302015 = VERTEX_POINT('',#302016); +#302016 = CARTESIAN_POINT('',(132.980491,-118.901921,0.)); +#302017 = LINE('',#302018,#302019); +#302018 = CARTESIAN_POINT('',(132.980491,-118.901921,0.)); +#302019 = VECTOR('',#302020,1.); +#302020 = DIRECTION('',(0.,0.,-1.)); +#302021 = ORIENTED_EDGE('',*,*,#302022,.F.); +#302022 = EDGE_CURVE('',#301983,#302015,#302023,.T.); +#302023 = CIRCLE('',#302024,0.100000456609); +#302024 = AXIS2_PLACEMENT_3D('',#302025,#302026,#302027); +#302025 = CARTESIAN_POINT('',(133.,-119.,0.)); +#302026 = DIRECTION('',(0.,0.,-1.)); +#302027 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#302028 = CYLINDRICAL_SURFACE('',#302029,0.100000456609); +#302029 = AXIS2_PLACEMENT_3D('',#302030,#302031,#302032); +#302030 = CARTESIAN_POINT('',(133.,-119.,0.)); +#302031 = DIRECTION('',(-0.,-0.,1.)); +#302032 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#302033 = ADVANCED_FACE('',(#302034),#302059,.F.); +#302034 = FACE_BOUND('',#302035,.F.); +#302035 = EDGE_LOOP('',(#302036,#302037,#302045,#302053)); +#302036 = ORIENTED_EDGE('',*,*,#302014,.T.); +#302037 = ORIENTED_EDGE('',*,*,#302038,.T.); +#302038 = EDGE_CURVE('',#302006,#302039,#302041,.T.); +#302039 = VERTEX_POINT('',#302040); +#302040 = CARTESIAN_POINT('',(133.094975,-118.9,-3.5E-02)); +#302041 = LINE('',#302042,#302043); +#302042 = CARTESIAN_POINT('',(132.980491,-118.901921,-3.5E-02)); +#302043 = VECTOR('',#302044,1.); +#302044 = DIRECTION('',(0.999859251606,1.67772756222E-02,0.)); +#302045 = ORIENTED_EDGE('',*,*,#302046,.F.); +#302046 = EDGE_CURVE('',#302047,#302039,#302049,.T.); +#302047 = VERTEX_POINT('',#302048); +#302048 = CARTESIAN_POINT('',(133.094975,-118.9,0.)); +#302049 = LINE('',#302050,#302051); +#302050 = CARTESIAN_POINT('',(133.094975,-118.9,0.)); +#302051 = VECTOR('',#302052,1.); +#302052 = DIRECTION('',(0.,0.,-1.)); +#302053 = ORIENTED_EDGE('',*,*,#302054,.F.); +#302054 = EDGE_CURVE('',#302015,#302047,#302055,.T.); +#302055 = LINE('',#302056,#302057); +#302056 = CARTESIAN_POINT('',(132.980491,-118.901921,0.)); +#302057 = VECTOR('',#302058,1.); +#302058 = DIRECTION('',(0.999859251606,1.67772756222E-02,0.)); +#302059 = PLANE('',#302060); +#302060 = AXIS2_PLACEMENT_3D('',#302061,#302062,#302063); +#302061 = CARTESIAN_POINT('',(132.980491,-118.901921,0.)); +#302062 = DIRECTION('',(1.67772756222E-02,-0.999859251606,0.)); +#302063 = DIRECTION('',(0.999859251606,1.67772756222E-02,0.)); +#302064 = ADVANCED_FACE('',(#302065),#302090,.F.); +#302065 = FACE_BOUND('',#302066,.F.); +#302066 = EDGE_LOOP('',(#302067,#302068,#302076,#302084)); +#302067 = ORIENTED_EDGE('',*,*,#302046,.T.); +#302068 = ORIENTED_EDGE('',*,*,#302069,.T.); +#302069 = EDGE_CURVE('',#302039,#302070,#302072,.T.); +#302070 = VERTEX_POINT('',#302071); +#302071 = CARTESIAN_POINT('',(133.35,-118.644975,-3.5E-02)); +#302072 = LINE('',#302073,#302074); +#302073 = CARTESIAN_POINT('',(133.094975,-118.9,-3.5E-02)); +#302074 = VECTOR('',#302075,1.); +#302075 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#302076 = ORIENTED_EDGE('',*,*,#302077,.F.); +#302077 = EDGE_CURVE('',#302078,#302070,#302080,.T.); +#302078 = VERTEX_POINT('',#302079); +#302079 = CARTESIAN_POINT('',(133.35,-118.644975,0.)); +#302080 = LINE('',#302081,#302082); +#302081 = CARTESIAN_POINT('',(133.35,-118.644975,0.)); +#302082 = VECTOR('',#302083,1.); +#302083 = DIRECTION('',(0.,0.,-1.)); +#302084 = ORIENTED_EDGE('',*,*,#302085,.F.); +#302085 = EDGE_CURVE('',#302047,#302078,#302086,.T.); +#302086 = LINE('',#302087,#302088); +#302087 = CARTESIAN_POINT('',(133.094975,-118.9,0.)); +#302088 = VECTOR('',#302089,1.); +#302089 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#302090 = PLANE('',#302091); +#302091 = AXIS2_PLACEMENT_3D('',#302092,#302093,#302094); +#302092 = CARTESIAN_POINT('',(133.094975,-118.9,0.)); +#302093 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#302094 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#302095 = ADVANCED_FACE('',(#302096),#302121,.F.); +#302096 = FACE_BOUND('',#302097,.F.); +#302097 = EDGE_LOOP('',(#302098,#302099,#302107,#302115)); +#302098 = ORIENTED_EDGE('',*,*,#302077,.T.); +#302099 = ORIENTED_EDGE('',*,*,#302100,.T.); +#302100 = EDGE_CURVE('',#302070,#302101,#302103,.T.); +#302101 = VERTEX_POINT('',#302102); +#302102 = CARTESIAN_POINT('',(133.35,-118.170788,-3.5E-02)); +#302103 = LINE('',#302104,#302105); +#302104 = CARTESIAN_POINT('',(133.35,-118.644975,-3.5E-02)); +#302105 = VECTOR('',#302106,1.); +#302106 = DIRECTION('',(0.,1.,0.)); +#302107 = ORIENTED_EDGE('',*,*,#302108,.F.); +#302108 = EDGE_CURVE('',#302109,#302101,#302111,.T.); +#302109 = VERTEX_POINT('',#302110); +#302110 = CARTESIAN_POINT('',(133.35,-118.170788,0.)); +#302111 = LINE('',#302112,#302113); +#302112 = CARTESIAN_POINT('',(133.35,-118.170788,0.)); +#302113 = VECTOR('',#302114,1.); +#302114 = DIRECTION('',(0.,0.,-1.)); +#302115 = ORIENTED_EDGE('',*,*,#302116,.F.); +#302116 = EDGE_CURVE('',#302078,#302109,#302117,.T.); +#302117 = LINE('',#302118,#302119); +#302118 = CARTESIAN_POINT('',(133.35,-118.644975,0.)); +#302119 = VECTOR('',#302120,1.); +#302120 = DIRECTION('',(0.,1.,0.)); +#302121 = PLANE('',#302122); +#302122 = AXIS2_PLACEMENT_3D('',#302123,#302124,#302125); +#302123 = CARTESIAN_POINT('',(133.35,-118.644975,0.)); +#302124 = DIRECTION('',(1.,-0.,0.)); +#302125 = DIRECTION('',(0.,1.,0.)); +#302126 = ADVANCED_FACE('',(#302127),#302152,.F.); +#302127 = FACE_BOUND('',#302128,.F.); +#302128 = EDGE_LOOP('',(#302129,#302130,#302138,#302146)); +#302129 = ORIENTED_EDGE('',*,*,#302108,.T.); +#302130 = ORIENTED_EDGE('',*,*,#302131,.T.); +#302131 = EDGE_CURVE('',#302101,#302132,#302134,.T.); +#302132 = VERTEX_POINT('',#302133); +#302133 = CARTESIAN_POINT('',(133.148712,-117.9695,-3.5E-02)); +#302134 = LINE('',#302135,#302136); +#302135 = CARTESIAN_POINT('',(133.35,-118.170788,-3.5E-02)); +#302136 = VECTOR('',#302137,1.); +#302137 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#302138 = ORIENTED_EDGE('',*,*,#302139,.F.); +#302139 = EDGE_CURVE('',#302140,#302132,#302142,.T.); +#302140 = VERTEX_POINT('',#302141); +#302141 = CARTESIAN_POINT('',(133.148712,-117.9695,0.)); +#302142 = LINE('',#302143,#302144); +#302143 = CARTESIAN_POINT('',(133.148712,-117.9695,0.)); +#302144 = VECTOR('',#302145,1.); +#302145 = DIRECTION('',(0.,0.,-1.)); +#302146 = ORIENTED_EDGE('',*,*,#302147,.F.); +#302147 = EDGE_CURVE('',#302109,#302140,#302148,.T.); +#302148 = LINE('',#302149,#302150); +#302149 = CARTESIAN_POINT('',(133.35,-118.170788,0.)); +#302150 = VECTOR('',#302151,1.); +#302151 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#302152 = PLANE('',#302153); +#302153 = AXIS2_PLACEMENT_3D('',#302154,#302155,#302156); +#302154 = CARTESIAN_POINT('',(133.35,-118.170788,0.)); +#302155 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#302156 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#302157 = ADVANCED_FACE('',(#302158),#302183,.F.); +#302158 = FACE_BOUND('',#302159,.F.); +#302159 = EDGE_LOOP('',(#302160,#302161,#302169,#302177)); +#302160 = ORIENTED_EDGE('',*,*,#302139,.T.); +#302161 = ORIENTED_EDGE('',*,*,#302162,.T.); +#302162 = EDGE_CURVE('',#302132,#302163,#302165,.T.); +#302163 = VERTEX_POINT('',#302164); +#302164 = CARTESIAN_POINT('',(133.135439,-117.977164,-3.5E-02)); +#302165 = LINE('',#302166,#302167); +#302166 = CARTESIAN_POINT('',(133.148712,-117.9695,-3.5E-02)); +#302167 = VECTOR('',#302168,1.); +#302168 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302169 = ORIENTED_EDGE('',*,*,#302170,.F.); +#302170 = EDGE_CURVE('',#302171,#302163,#302173,.T.); +#302171 = VERTEX_POINT('',#302172); +#302172 = CARTESIAN_POINT('',(133.135439,-117.977164,0.)); +#302173 = LINE('',#302174,#302175); +#302174 = CARTESIAN_POINT('',(133.135439,-117.977164,0.)); +#302175 = VECTOR('',#302176,1.); +#302176 = DIRECTION('',(0.,0.,-1.)); +#302177 = ORIENTED_EDGE('',*,*,#302178,.F.); +#302178 = EDGE_CURVE('',#302140,#302171,#302179,.T.); +#302179 = LINE('',#302180,#302181); +#302180 = CARTESIAN_POINT('',(133.148712,-117.9695,0.)); +#302181 = VECTOR('',#302182,1.); +#302182 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302183 = PLANE('',#302184); +#302184 = AXIS2_PLACEMENT_3D('',#302185,#302186,#302187); +#302185 = CARTESIAN_POINT('',(133.148712,-117.9695,0.)); +#302186 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#302187 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302188 = ADVANCED_FACE('',(#302189),#302216,.T.); +#302189 = FACE_BOUND('',#302190,.F.); +#302190 = EDGE_LOOP('',(#302191,#302192,#302201,#302209)); +#302191 = ORIENTED_EDGE('',*,*,#302170,.T.); +#302192 = ORIENTED_EDGE('',*,*,#302193,.T.); +#302193 = EDGE_CURVE('',#302163,#302194,#302196,.T.); +#302194 = VERTEX_POINT('',#302195); +#302195 = CARTESIAN_POINT('',(133.297798,-117.814805,-3.5E-02)); +#302196 = CIRCLE('',#302197,0.300000118202); +#302197 = AXIS2_PLACEMENT_3D('',#302198,#302199,#302200); +#302198 = CARTESIAN_POINT('',(133.020634,-117.7,-3.5E-02)); +#302199 = DIRECTION('',(0.,0.,-1.)); +#302200 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#302201 = ORIENTED_EDGE('',*,*,#302202,.F.); +#302202 = EDGE_CURVE('',#302203,#302194,#302205,.T.); +#302203 = VERTEX_POINT('',#302204); +#302204 = CARTESIAN_POINT('',(133.297798,-117.814805,0.)); +#302205 = LINE('',#302206,#302207); +#302206 = CARTESIAN_POINT('',(133.297798,-117.814805,0.)); +#302207 = VECTOR('',#302208,1.); +#302208 = DIRECTION('',(0.,0.,-1.)); +#302209 = ORIENTED_EDGE('',*,*,#302210,.F.); +#302210 = EDGE_CURVE('',#302171,#302203,#302211,.T.); +#302211 = CIRCLE('',#302212,0.300000118202); +#302212 = AXIS2_PLACEMENT_3D('',#302213,#302214,#302215); +#302213 = CARTESIAN_POINT('',(133.020634,-117.7,0.)); +#302214 = DIRECTION('',(0.,0.,-1.)); +#302215 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#302216 = CYLINDRICAL_SURFACE('',#302217,0.300000118202); +#302217 = AXIS2_PLACEMENT_3D('',#302218,#302219,#302220); +#302218 = CARTESIAN_POINT('',(133.020634,-117.7,0.)); +#302219 = DIRECTION('',(-0.,-0.,1.)); +#302220 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#302221 = ADVANCED_FACE('',(#302222),#302238,.F.); +#302222 = FACE_BOUND('',#302223,.F.); +#302223 = EDGE_LOOP('',(#302224,#302225,#302231,#302232)); +#302224 = ORIENTED_EDGE('',*,*,#302202,.T.); +#302225 = ORIENTED_EDGE('',*,*,#302226,.T.); +#302226 = EDGE_CURVE('',#302194,#301469,#302227,.T.); +#302227 = LINE('',#302228,#302229); +#302228 = CARTESIAN_POINT('',(133.297798,-117.814805,-3.5E-02)); +#302229 = VECTOR('',#302230,1.); +#302230 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#302231 = ORIENTED_EDGE('',*,*,#301466,.F.); +#302232 = ORIENTED_EDGE('',*,*,#302233,.F.); +#302233 = EDGE_CURVE('',#302203,#301467,#302234,.T.); +#302234 = LINE('',#302235,#302236); +#302235 = CARTESIAN_POINT('',(133.297798,-117.814805,0.)); +#302236 = VECTOR('',#302237,1.); +#302237 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#302238 = PLANE('',#302239); +#302239 = AXIS2_PLACEMENT_3D('',#302240,#302241,#302242); +#302240 = CARTESIAN_POINT('',(133.297798,-117.814805,0.)); +#302241 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#302242 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#302243 = ADVANCED_FACE('',(#302244),#302271,.F.); +#302244 = FACE_BOUND('',#302245,.F.); +#302245 = EDGE_LOOP('',(#302246,#302256,#302263,#302264)); +#302246 = ORIENTED_EDGE('',*,*,#302247,.T.); +#302247 = EDGE_CURVE('',#302248,#302250,#302252,.T.); +#302248 = VERTEX_POINT('',#302249); +#302249 = CARTESIAN_POINT('',(133.157889,-120.5,0.)); +#302250 = VERTEX_POINT('',#302251); +#302251 = CARTESIAN_POINT('',(133.157889,-120.5,-3.5E-02)); +#302252 = LINE('',#302253,#302254); +#302253 = CARTESIAN_POINT('',(133.157889,-120.5,0.)); +#302254 = VECTOR('',#302255,1.); +#302255 = DIRECTION('',(0.,0.,-1.)); +#302256 = ORIENTED_EDGE('',*,*,#302257,.T.); +#302257 = EDGE_CURVE('',#302250,#302250,#302258,.T.); +#302258 = CIRCLE('',#302259,0.137255); +#302259 = AXIS2_PLACEMENT_3D('',#302260,#302261,#302262); +#302260 = CARTESIAN_POINT('',(133.020634,-120.5,-3.5E-02)); +#302261 = DIRECTION('',(0.,0.,1.)); +#302262 = DIRECTION('',(1.,0.,-0.)); +#302263 = ORIENTED_EDGE('',*,*,#302247,.F.); +#302264 = ORIENTED_EDGE('',*,*,#302265,.F.); +#302265 = EDGE_CURVE('',#302248,#302248,#302266,.T.); +#302266 = CIRCLE('',#302267,0.137255); +#302267 = AXIS2_PLACEMENT_3D('',#302268,#302269,#302270); +#302268 = CARTESIAN_POINT('',(133.020634,-120.5,0.)); +#302269 = DIRECTION('',(0.,0.,1.)); +#302270 = DIRECTION('',(1.,0.,-0.)); +#302271 = CYLINDRICAL_SURFACE('',#302272,0.137255); +#302272 = AXIS2_PLACEMENT_3D('',#302273,#302274,#302275); +#302273 = CARTESIAN_POINT('',(133.020634,-120.5,0.)); +#302274 = DIRECTION('',(0.,0.,1.)); +#302275 = DIRECTION('',(1.,0.,-0.)); +#302276 = ADVANCED_FACE('',(#302277),#302304,.F.); +#302277 = FACE_BOUND('',#302278,.F.); +#302278 = EDGE_LOOP('',(#302279,#302289,#302296,#302297)); +#302279 = ORIENTED_EDGE('',*,*,#302280,.T.); +#302280 = EDGE_CURVE('',#302281,#302283,#302285,.T.); +#302281 = VERTEX_POINT('',#302282); +#302282 = CARTESIAN_POINT('',(133.157889,-117.7,0.)); +#302283 = VERTEX_POINT('',#302284); +#302284 = CARTESIAN_POINT('',(133.157889,-117.7,-3.5E-02)); +#302285 = LINE('',#302286,#302287); +#302286 = CARTESIAN_POINT('',(133.157889,-117.7,0.)); +#302287 = VECTOR('',#302288,1.); +#302288 = DIRECTION('',(0.,0.,-1.)); +#302289 = ORIENTED_EDGE('',*,*,#302290,.T.); +#302290 = EDGE_CURVE('',#302283,#302283,#302291,.T.); +#302291 = CIRCLE('',#302292,0.137255); +#302292 = AXIS2_PLACEMENT_3D('',#302293,#302294,#302295); +#302293 = CARTESIAN_POINT('',(133.020634,-117.7,-3.5E-02)); +#302294 = DIRECTION('',(0.,0.,1.)); +#302295 = DIRECTION('',(1.,0.,-0.)); +#302296 = ORIENTED_EDGE('',*,*,#302280,.F.); +#302297 = ORIENTED_EDGE('',*,*,#302298,.F.); +#302298 = EDGE_CURVE('',#302281,#302281,#302299,.T.); +#302299 = CIRCLE('',#302300,0.137255); +#302300 = AXIS2_PLACEMENT_3D('',#302301,#302302,#302303); +#302301 = CARTESIAN_POINT('',(133.020634,-117.7,0.)); +#302302 = DIRECTION('',(0.,0.,1.)); +#302303 = DIRECTION('',(1.,0.,-0.)); +#302304 = CYLINDRICAL_SURFACE('',#302305,0.137255); +#302305 = AXIS2_PLACEMENT_3D('',#302306,#302307,#302308); +#302306 = CARTESIAN_POINT('',(133.020634,-117.7,0.)); +#302307 = DIRECTION('',(0.,0.,1.)); +#302308 = DIRECTION('',(1.,0.,-0.)); +#302309 = ADVANCED_FACE('',(#302310,#302337,#302340),#302343,.F.); +#302310 = FACE_BOUND('',#302311,.F.); +#302311 = EDGE_LOOP('',(#302312,#302313,#302314,#302315,#302316,#302317, + #302318,#302319,#302320,#302321,#302322,#302323,#302324,#302325, + #302326,#302327,#302328,#302329,#302330,#302331,#302332,#302333, + #302334,#302335,#302336)); +#302312 = ORIENTED_EDGE('',*,*,#301492,.T.); +#302313 = ORIENTED_EDGE('',*,*,#301523,.T.); +#302314 = ORIENTED_EDGE('',*,*,#301554,.T.); +#302315 = ORIENTED_EDGE('',*,*,#301585,.T.); +#302316 = ORIENTED_EDGE('',*,*,#301616,.T.); +#302317 = ORIENTED_EDGE('',*,*,#301647,.T.); +#302318 = ORIENTED_EDGE('',*,*,#301678,.T.); +#302319 = ORIENTED_EDGE('',*,*,#301709,.T.); +#302320 = ORIENTED_EDGE('',*,*,#301740,.T.); +#302321 = ORIENTED_EDGE('',*,*,#301771,.T.); +#302322 = ORIENTED_EDGE('',*,*,#301802,.T.); +#302323 = ORIENTED_EDGE('',*,*,#301834,.T.); +#302324 = ORIENTED_EDGE('',*,*,#301866,.T.); +#302325 = ORIENTED_EDGE('',*,*,#301897,.T.); +#302326 = ORIENTED_EDGE('',*,*,#301928,.T.); +#302327 = ORIENTED_EDGE('',*,*,#301959,.T.); +#302328 = ORIENTED_EDGE('',*,*,#301990,.T.); +#302329 = ORIENTED_EDGE('',*,*,#302022,.T.); +#302330 = ORIENTED_EDGE('',*,*,#302054,.T.); +#302331 = ORIENTED_EDGE('',*,*,#302085,.T.); +#302332 = ORIENTED_EDGE('',*,*,#302116,.T.); +#302333 = ORIENTED_EDGE('',*,*,#302147,.T.); +#302334 = ORIENTED_EDGE('',*,*,#302178,.T.); +#302335 = ORIENTED_EDGE('',*,*,#302210,.T.); +#302336 = ORIENTED_EDGE('',*,*,#302233,.T.); +#302337 = FACE_BOUND('',#302338,.F.); +#302338 = EDGE_LOOP('',(#302339)); +#302339 = ORIENTED_EDGE('',*,*,#302265,.T.); +#302340 = FACE_BOUND('',#302341,.F.); +#302341 = EDGE_LOOP('',(#302342)); +#302342 = ORIENTED_EDGE('',*,*,#302298,.T.); +#302343 = PLANE('',#302344); +#302344 = AXIS2_PLACEMENT_3D('',#302345,#302346,#302347); +#302345 = CARTESIAN_POINT('',(0.,0.,0.)); +#302346 = DIRECTION('',(-0.,-0.,-1.)); +#302347 = DIRECTION('',(-1.,0.,0.)); +#302348 = ADVANCED_FACE('',(#302349,#302376,#302379),#302382,.T.); +#302349 = FACE_BOUND('',#302350,.T.); +#302350 = EDGE_LOOP('',(#302351,#302352,#302353,#302354,#302355,#302356, + #302357,#302358,#302359,#302360,#302361,#302362,#302363,#302364, + #302365,#302366,#302367,#302368,#302369,#302370,#302371,#302372, + #302373,#302374,#302375)); +#302351 = ORIENTED_EDGE('',*,*,#301476,.T.); +#302352 = ORIENTED_EDGE('',*,*,#301507,.T.); +#302353 = ORIENTED_EDGE('',*,*,#301538,.T.); +#302354 = ORIENTED_EDGE('',*,*,#301569,.T.); +#302355 = ORIENTED_EDGE('',*,*,#301600,.T.); +#302356 = ORIENTED_EDGE('',*,*,#301631,.T.); +#302357 = ORIENTED_EDGE('',*,*,#301662,.T.); +#302358 = ORIENTED_EDGE('',*,*,#301693,.T.); +#302359 = ORIENTED_EDGE('',*,*,#301724,.T.); +#302360 = ORIENTED_EDGE('',*,*,#301755,.T.); +#302361 = ORIENTED_EDGE('',*,*,#301786,.T.); +#302362 = ORIENTED_EDGE('',*,*,#301817,.T.); +#302363 = ORIENTED_EDGE('',*,*,#301850,.T.); +#302364 = ORIENTED_EDGE('',*,*,#301881,.T.); +#302365 = ORIENTED_EDGE('',*,*,#301912,.T.); +#302366 = ORIENTED_EDGE('',*,*,#301943,.T.); +#302367 = ORIENTED_EDGE('',*,*,#301974,.T.); +#302368 = ORIENTED_EDGE('',*,*,#302005,.T.); +#302369 = ORIENTED_EDGE('',*,*,#302038,.T.); +#302370 = ORIENTED_EDGE('',*,*,#302069,.T.); +#302371 = ORIENTED_EDGE('',*,*,#302100,.T.); +#302372 = ORIENTED_EDGE('',*,*,#302131,.T.); +#302373 = ORIENTED_EDGE('',*,*,#302162,.T.); +#302374 = ORIENTED_EDGE('',*,*,#302193,.T.); +#302375 = ORIENTED_EDGE('',*,*,#302226,.T.); +#302376 = FACE_BOUND('',#302377,.T.); +#302377 = EDGE_LOOP('',(#302378)); +#302378 = ORIENTED_EDGE('',*,*,#302257,.T.); +#302379 = FACE_BOUND('',#302380,.T.); +#302380 = EDGE_LOOP('',(#302381)); +#302381 = ORIENTED_EDGE('',*,*,#302290,.T.); +#302382 = PLANE('',#302383); +#302383 = AXIS2_PLACEMENT_3D('',#302384,#302385,#302386); +#302384 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#302385 = DIRECTION('',(-0.,-0.,-1.)); +#302386 = DIRECTION('',(-1.,0.,0.)); +#302387 = MANIFOLD_SOLID_BREP('',#302388); +#302388 = CLOSED_SHELL('',(#302389,#302429,#302460,#302491,#302524, + #302555,#302586,#302617,#302650,#302672,#302705,#302725)); +#302389 = ADVANCED_FACE('',(#302390),#302424,.F.); +#302390 = FACE_BOUND('',#302391,.F.); +#302391 = EDGE_LOOP('',(#302392,#302402,#302410,#302418)); +#302392 = ORIENTED_EDGE('',*,*,#302393,.T.); +#302393 = EDGE_CURVE('',#302394,#302396,#302398,.T.); +#302394 = VERTEX_POINT('',#302395); +#302395 = CARTESIAN_POINT('',(139.424449,-120.287682,0.)); +#302396 = VERTEX_POINT('',#302397); +#302397 = CARTESIAN_POINT('',(139.424449,-120.287682,-3.5E-02)); +#302398 = LINE('',#302399,#302400); +#302399 = CARTESIAN_POINT('',(139.424449,-120.287682,0.)); +#302400 = VECTOR('',#302401,1.); +#302401 = DIRECTION('',(0.,0.,-1.)); +#302402 = ORIENTED_EDGE('',*,*,#302403,.T.); +#302403 = EDGE_CURVE('',#302396,#302404,#302406,.T.); +#302404 = VERTEX_POINT('',#302405); +#302405 = CARTESIAN_POINT('',(139.083335,-120.624721,-3.5E-02)); +#302406 = LINE('',#302407,#302408); +#302407 = CARTESIAN_POINT('',(139.424449,-120.287682,-3.5E-02)); +#302408 = VECTOR('',#302409,1.); +#302409 = DIRECTION('',(-0.711342921182,-0.702845109882,0.)); +#302410 = ORIENTED_EDGE('',*,*,#302411,.F.); +#302411 = EDGE_CURVE('',#302412,#302404,#302414,.T.); +#302412 = VERTEX_POINT('',#302413); +#302413 = CARTESIAN_POINT('',(139.083335,-120.624721,0.)); +#302414 = LINE('',#302415,#302416); +#302415 = CARTESIAN_POINT('',(139.083335,-120.624721,0.)); +#302416 = VECTOR('',#302417,1.); +#302417 = DIRECTION('',(0.,0.,-1.)); +#302418 = ORIENTED_EDGE('',*,*,#302419,.F.); +#302419 = EDGE_CURVE('',#302394,#302412,#302420,.T.); +#302420 = LINE('',#302421,#302422); +#302421 = CARTESIAN_POINT('',(139.424449,-120.287682,0.)); +#302422 = VECTOR('',#302423,1.); +#302423 = DIRECTION('',(-0.711342921182,-0.702845109882,0.)); +#302424 = PLANE('',#302425); +#302425 = AXIS2_PLACEMENT_3D('',#302426,#302427,#302428); +#302426 = CARTESIAN_POINT('',(139.424449,-120.287682,0.)); +#302427 = DIRECTION('',(-0.702845109882,0.711342921182,0.)); +#302428 = DIRECTION('',(-0.711342921182,-0.702845109882,0.)); +#302429 = ADVANCED_FACE('',(#302430),#302455,.F.); +#302430 = FACE_BOUND('',#302431,.F.); +#302431 = EDGE_LOOP('',(#302432,#302433,#302441,#302449)); +#302432 = ORIENTED_EDGE('',*,*,#302411,.T.); +#302433 = ORIENTED_EDGE('',*,*,#302434,.T.); +#302434 = EDGE_CURVE('',#302404,#302435,#302437,.T.); +#302435 = VERTEX_POINT('',#302436); +#302436 = CARTESIAN_POINT('',(139.029264,-120.647118,-3.5E-02)); +#302437 = LINE('',#302438,#302439); +#302438 = CARTESIAN_POINT('',(139.083335,-120.624721,-3.5E-02)); +#302439 = VECTOR('',#302440,1.); +#302440 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#302441 = ORIENTED_EDGE('',*,*,#302442,.F.); +#302442 = EDGE_CURVE('',#302443,#302435,#302445,.T.); +#302443 = VERTEX_POINT('',#302444); +#302444 = CARTESIAN_POINT('',(139.029264,-120.647118,0.)); +#302445 = LINE('',#302446,#302447); +#302446 = CARTESIAN_POINT('',(139.029264,-120.647118,0.)); +#302447 = VECTOR('',#302448,1.); +#302448 = DIRECTION('',(0.,0.,-1.)); +#302449 = ORIENTED_EDGE('',*,*,#302450,.F.); +#302450 = EDGE_CURVE('',#302412,#302443,#302451,.T.); +#302451 = LINE('',#302452,#302453); +#302452 = CARTESIAN_POINT('',(139.083335,-120.624721,0.)); +#302453 = VECTOR('',#302454,1.); +#302454 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#302455 = PLANE('',#302456); +#302456 = AXIS2_PLACEMENT_3D('',#302457,#302458,#302459); +#302457 = CARTESIAN_POINT('',(139.083335,-120.624721,0.)); +#302458 = DIRECTION('',(-0.382684285085,0.923879179303,0.)); +#302459 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#302460 = ADVANCED_FACE('',(#302461),#302486,.F.); +#302461 = FACE_BOUND('',#302462,.F.); +#302462 = EDGE_LOOP('',(#302463,#302464,#302472,#302480)); +#302463 = ORIENTED_EDGE('',*,*,#302442,.T.); +#302464 = ORIENTED_EDGE('',*,*,#302465,.T.); +#302465 = EDGE_CURVE('',#302435,#302466,#302468,.T.); +#302466 = VERTEX_POINT('',#302467); +#302467 = CARTESIAN_POINT('',(138.370736,-120.647118,-3.5E-02)); +#302468 = LINE('',#302469,#302470); +#302469 = CARTESIAN_POINT('',(139.029264,-120.647118,-3.5E-02)); +#302470 = VECTOR('',#302471,1.); +#302471 = DIRECTION('',(-1.,0.,0.)); +#302472 = ORIENTED_EDGE('',*,*,#302473,.F.); +#302473 = EDGE_CURVE('',#302474,#302466,#302476,.T.); +#302474 = VERTEX_POINT('',#302475); +#302475 = CARTESIAN_POINT('',(138.370736,-120.647118,0.)); +#302476 = LINE('',#302477,#302478); +#302477 = CARTESIAN_POINT('',(138.370736,-120.647118,0.)); +#302478 = VECTOR('',#302479,1.); +#302479 = DIRECTION('',(0.,0.,-1.)); +#302480 = ORIENTED_EDGE('',*,*,#302481,.F.); +#302481 = EDGE_CURVE('',#302443,#302474,#302482,.T.); +#302482 = LINE('',#302483,#302484); +#302483 = CARTESIAN_POINT('',(139.029264,-120.647118,0.)); +#302484 = VECTOR('',#302485,1.); +#302485 = DIRECTION('',(-1.,0.,0.)); +#302486 = PLANE('',#302487); +#302487 = AXIS2_PLACEMENT_3D('',#302488,#302489,#302490); +#302488 = CARTESIAN_POINT('',(139.029264,-120.647118,0.)); +#302489 = DIRECTION('',(0.,1.,0.)); +#302490 = DIRECTION('',(-1.,0.,0.)); +#302491 = ADVANCED_FACE('',(#302492),#302519,.T.); +#302492 = FACE_BOUND('',#302493,.F.); +#302493 = EDGE_LOOP('',(#302494,#302495,#302504,#302512)); +#302494 = ORIENTED_EDGE('',*,*,#302473,.T.); +#302495 = ORIENTED_EDGE('',*,*,#302496,.T.); +#302496 = EDGE_CURVE('',#302466,#302497,#302499,.T.); +#302497 = VERTEX_POINT('',#302498); +#302498 = CARTESIAN_POINT('',(138.370736,-120.352882,-3.5E-02)); +#302499 = CIRCLE('',#302500,0.150000292066); +#302500 = AXIS2_PLACEMENT_3D('',#302501,#302502,#302503); +#302501 = CARTESIAN_POINT('',(138.4,-120.5,-3.5E-02)); +#302502 = DIRECTION('',(0.,0.,-1.)); +#302503 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#302504 = ORIENTED_EDGE('',*,*,#302505,.F.); +#302505 = EDGE_CURVE('',#302506,#302497,#302508,.T.); +#302506 = VERTEX_POINT('',#302507); +#302507 = CARTESIAN_POINT('',(138.370736,-120.352882,0.)); +#302508 = LINE('',#302509,#302510); +#302509 = CARTESIAN_POINT('',(138.370736,-120.352882,0.)); +#302510 = VECTOR('',#302511,1.); +#302511 = DIRECTION('',(0.,0.,-1.)); +#302512 = ORIENTED_EDGE('',*,*,#302513,.F.); +#302513 = EDGE_CURVE('',#302474,#302506,#302514,.T.); +#302514 = CIRCLE('',#302515,0.150000292066); +#302515 = AXIS2_PLACEMENT_3D('',#302516,#302517,#302518); +#302516 = CARTESIAN_POINT('',(138.4,-120.5,0.)); +#302517 = DIRECTION('',(0.,0.,-1.)); +#302518 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#302519 = CYLINDRICAL_SURFACE('',#302520,0.150000292066); +#302520 = AXIS2_PLACEMENT_3D('',#302521,#302522,#302523); +#302521 = CARTESIAN_POINT('',(138.4,-120.5,0.)); +#302522 = DIRECTION('',(-0.,-0.,1.)); +#302523 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#302524 = ADVANCED_FACE('',(#302525),#302550,.F.); +#302525 = FACE_BOUND('',#302526,.F.); +#302526 = EDGE_LOOP('',(#302527,#302528,#302536,#302544)); +#302527 = ORIENTED_EDGE('',*,*,#302505,.T.); +#302528 = ORIENTED_EDGE('',*,*,#302529,.T.); +#302529 = EDGE_CURVE('',#302497,#302530,#302532,.T.); +#302530 = VERTEX_POINT('',#302531); +#302531 = CARTESIAN_POINT('',(138.937868,-120.35,-3.5E-02)); +#302532 = LINE('',#302533,#302534); +#302533 = CARTESIAN_POINT('',(138.370736,-120.352882,-3.5E-02)); +#302534 = VECTOR('',#302535,1.); +#302535 = DIRECTION('',(0.999987088365,5.081643759596E-03,0.)); +#302536 = ORIENTED_EDGE('',*,*,#302537,.F.); +#302537 = EDGE_CURVE('',#302538,#302530,#302540,.T.); +#302538 = VERTEX_POINT('',#302539); +#302539 = CARTESIAN_POINT('',(138.937868,-120.35,0.)); +#302540 = LINE('',#302541,#302542); +#302541 = CARTESIAN_POINT('',(138.937868,-120.35,0.)); +#302542 = VECTOR('',#302543,1.); +#302543 = DIRECTION('',(0.,0.,-1.)); +#302544 = ORIENTED_EDGE('',*,*,#302545,.F.); +#302545 = EDGE_CURVE('',#302506,#302538,#302546,.T.); +#302546 = LINE('',#302547,#302548); +#302547 = CARTESIAN_POINT('',(138.370736,-120.352882,0.)); +#302548 = VECTOR('',#302549,1.); +#302549 = DIRECTION('',(0.999987088365,5.081643759596E-03,0.)); +#302550 = PLANE('',#302551); +#302551 = AXIS2_PLACEMENT_3D('',#302552,#302553,#302554); +#302552 = CARTESIAN_POINT('',(138.370736,-120.352882,0.)); +#302553 = DIRECTION('',(5.081643759596E-03,-0.999987088365,0.)); +#302554 = DIRECTION('',(0.999987088365,5.081643759596E-03,0.)); +#302555 = ADVANCED_FACE('',(#302556),#302581,.F.); +#302556 = FACE_BOUND('',#302557,.F.); +#302557 = EDGE_LOOP('',(#302558,#302559,#302567,#302575)); +#302558 = ORIENTED_EDGE('',*,*,#302537,.T.); +#302559 = ORIENTED_EDGE('',*,*,#302560,.T.); +#302560 = EDGE_CURVE('',#302530,#302561,#302563,.T.); +#302561 = VERTEX_POINT('',#302562); +#302562 = CARTESIAN_POINT('',(139.212317,-120.07555,-3.5E-02)); +#302563 = LINE('',#302564,#302565); +#302564 = CARTESIAN_POINT('',(138.937868,-120.35,-3.5E-02)); +#302565 = VECTOR('',#302566,1.); +#302566 = DIRECTION('',(0.707105492958,0.707108069413,0.)); +#302567 = ORIENTED_EDGE('',*,*,#302568,.F.); +#302568 = EDGE_CURVE('',#302569,#302561,#302571,.T.); +#302569 = VERTEX_POINT('',#302570); +#302570 = CARTESIAN_POINT('',(139.212317,-120.07555,0.)); +#302571 = LINE('',#302572,#302573); +#302572 = CARTESIAN_POINT('',(139.212317,-120.07555,0.)); +#302573 = VECTOR('',#302574,1.); +#302574 = DIRECTION('',(0.,0.,-1.)); +#302575 = ORIENTED_EDGE('',*,*,#302576,.F.); +#302576 = EDGE_CURVE('',#302538,#302569,#302577,.T.); +#302577 = LINE('',#302578,#302579); +#302578 = CARTESIAN_POINT('',(138.937868,-120.35,0.)); +#302579 = VECTOR('',#302580,1.); +#302580 = DIRECTION('',(0.707105492958,0.707108069413,0.)); +#302581 = PLANE('',#302582); +#302582 = AXIS2_PLACEMENT_3D('',#302583,#302584,#302585); +#302583 = CARTESIAN_POINT('',(138.937868,-120.35,0.)); +#302584 = DIRECTION('',(0.707108069413,-0.707105492958,0.)); +#302585 = DIRECTION('',(0.707105492958,0.707108069413,0.)); +#302586 = ADVANCED_FACE('',(#302587),#302612,.F.); +#302587 = FACE_BOUND('',#302588,.F.); +#302588 = EDGE_LOOP('',(#302589,#302590,#302598,#302606)); +#302589 = ORIENTED_EDGE('',*,*,#302568,.T.); +#302590 = ORIENTED_EDGE('',*,*,#302591,.T.); +#302591 = EDGE_CURVE('',#302561,#302592,#302594,.T.); +#302592 = VERTEX_POINT('',#302593); +#302593 = CARTESIAN_POINT('',(139.202567,-120.039158,-3.5E-02)); +#302594 = LINE('',#302595,#302596); +#302595 = CARTESIAN_POINT('',(139.212317,-120.07555,-3.5E-02)); +#302596 = VECTOR('',#302597,1.); +#302597 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#302598 = ORIENTED_EDGE('',*,*,#302599,.F.); +#302599 = EDGE_CURVE('',#302600,#302592,#302602,.T.); +#302600 = VERTEX_POINT('',#302601); +#302601 = CARTESIAN_POINT('',(139.202567,-120.039158,0.)); +#302602 = LINE('',#302603,#302604); +#302603 = CARTESIAN_POINT('',(139.202567,-120.039158,0.)); +#302604 = VECTOR('',#302605,1.); +#302605 = DIRECTION('',(0.,0.,-1.)); +#302606 = ORIENTED_EDGE('',*,*,#302607,.F.); +#302607 = EDGE_CURVE('',#302569,#302600,#302608,.T.); +#302608 = LINE('',#302609,#302610); +#302609 = CARTESIAN_POINT('',(139.212317,-120.07555,0.)); +#302610 = VECTOR('',#302611,1.); +#302611 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#302612 = PLANE('',#302613); +#302613 = AXIS2_PLACEMENT_3D('',#302614,#302615,#302616); +#302614 = CARTESIAN_POINT('',(139.212317,-120.07555,0.)); +#302615 = DIRECTION('',(0.965933835092,0.258789153994,0.)); +#302616 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#302617 = ADVANCED_FACE('',(#302618),#302645,.T.); +#302618 = FACE_BOUND('',#302619,.F.); +#302619 = EDGE_LOOP('',(#302620,#302621,#302630,#302638)); +#302620 = ORIENTED_EDGE('',*,*,#302599,.T.); +#302621 = ORIENTED_EDGE('',*,*,#302622,.T.); +#302622 = EDGE_CURVE('',#302592,#302623,#302625,.T.); +#302623 = VERTEX_POINT('',#302624); +#302624 = CARTESIAN_POINT('',(139.460842,-120.297433,-3.5E-02)); +#302625 = CIRCLE('',#302626,0.300000634557); +#302626 = AXIS2_PLACEMENT_3D('',#302627,#302628,#302629); +#302627 = CARTESIAN_POINT('',(139.50000095409,-119.9999990459,-3.5E-02) + ); +#302628 = DIRECTION('',(0.,0.,-1.)); +#302629 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#302630 = ORIENTED_EDGE('',*,*,#302631,.F.); +#302631 = EDGE_CURVE('',#302632,#302623,#302634,.T.); +#302632 = VERTEX_POINT('',#302633); +#302633 = CARTESIAN_POINT('',(139.460842,-120.297433,0.)); +#302634 = LINE('',#302635,#302636); +#302635 = CARTESIAN_POINT('',(139.460842,-120.297433,0.)); +#302636 = VECTOR('',#302637,1.); +#302637 = DIRECTION('',(0.,0.,-1.)); +#302638 = ORIENTED_EDGE('',*,*,#302639,.F.); +#302639 = EDGE_CURVE('',#302600,#302632,#302640,.T.); +#302640 = CIRCLE('',#302641,0.300000634557); +#302641 = AXIS2_PLACEMENT_3D('',#302642,#302643,#302644); +#302642 = CARTESIAN_POINT('',(139.50000095409,-119.9999990459,0.)); +#302643 = DIRECTION('',(0.,0.,-1.)); +#302644 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#302645 = CYLINDRICAL_SURFACE('',#302646,0.300000634557); +#302646 = AXIS2_PLACEMENT_3D('',#302647,#302648,#302649); +#302647 = CARTESIAN_POINT('',(139.50000095409,-119.9999990459,0.)); +#302648 = DIRECTION('',(-0.,-0.,1.)); +#302649 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#302650 = ADVANCED_FACE('',(#302651),#302667,.F.); +#302651 = FACE_BOUND('',#302652,.F.); +#302652 = EDGE_LOOP('',(#302653,#302654,#302660,#302661)); +#302653 = ORIENTED_EDGE('',*,*,#302631,.T.); +#302654 = ORIENTED_EDGE('',*,*,#302655,.T.); +#302655 = EDGE_CURVE('',#302623,#302396,#302656,.T.); +#302656 = LINE('',#302657,#302658); +#302657 = CARTESIAN_POINT('',(139.460842,-120.297433,-3.5E-02)); +#302658 = VECTOR('',#302659,1.); +#302659 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#302660 = ORIENTED_EDGE('',*,*,#302393,.F.); +#302661 = ORIENTED_EDGE('',*,*,#302662,.F.); +#302662 = EDGE_CURVE('',#302632,#302394,#302663,.T.); +#302663 = LINE('',#302664,#302665); +#302664 = CARTESIAN_POINT('',(139.460842,-120.297433,0.)); +#302665 = VECTOR('',#302666,1.); +#302666 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#302667 = PLANE('',#302668); +#302668 = AXIS2_PLACEMENT_3D('',#302669,#302670,#302671); +#302669 = CARTESIAN_POINT('',(139.460842,-120.297433,0.)); +#302670 = DIRECTION('',(0.25880728333,0.96592897777,0.)); +#302671 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#302672 = ADVANCED_FACE('',(#302673),#302700,.F.); +#302673 = FACE_BOUND('',#302674,.F.); +#302674 = EDGE_LOOP('',(#302675,#302685,#302692,#302693)); +#302675 = ORIENTED_EDGE('',*,*,#302676,.T.); +#302676 = EDGE_CURVE('',#302677,#302679,#302681,.T.); +#302677 = VERTEX_POINT('',#302678); +#302678 = CARTESIAN_POINT('',(139.637255,-120.,0.)); +#302679 = VERTEX_POINT('',#302680); +#302680 = CARTESIAN_POINT('',(139.637255,-120.,-3.5E-02)); +#302681 = LINE('',#302682,#302683); +#302682 = CARTESIAN_POINT('',(139.637255,-120.,0.)); +#302683 = VECTOR('',#302684,1.); +#302684 = DIRECTION('',(0.,0.,-1.)); +#302685 = ORIENTED_EDGE('',*,*,#302686,.T.); +#302686 = EDGE_CURVE('',#302679,#302679,#302687,.T.); +#302687 = CIRCLE('',#302688,0.137255); +#302688 = AXIS2_PLACEMENT_3D('',#302689,#302690,#302691); +#302689 = CARTESIAN_POINT('',(139.5,-120.,-3.5E-02)); +#302690 = DIRECTION('',(0.,0.,1.)); +#302691 = DIRECTION('',(1.,0.,-0.)); +#302692 = ORIENTED_EDGE('',*,*,#302676,.F.); +#302693 = ORIENTED_EDGE('',*,*,#302694,.F.); +#302694 = EDGE_CURVE('',#302677,#302677,#302695,.T.); +#302695 = CIRCLE('',#302696,0.137255); +#302696 = AXIS2_PLACEMENT_3D('',#302697,#302698,#302699); +#302697 = CARTESIAN_POINT('',(139.5,-120.,0.)); +#302698 = DIRECTION('',(0.,0.,1.)); +#302699 = DIRECTION('',(1.,0.,-0.)); +#302700 = CYLINDRICAL_SURFACE('',#302701,0.137255); +#302701 = AXIS2_PLACEMENT_3D('',#302702,#302703,#302704); +#302702 = CARTESIAN_POINT('',(139.5,-120.,0.)); +#302703 = DIRECTION('',(0.,0.,1.)); +#302704 = DIRECTION('',(1.,0.,-0.)); +#302705 = ADVANCED_FACE('',(#302706,#302717),#302720,.F.); +#302706 = FACE_BOUND('',#302707,.F.); +#302707 = EDGE_LOOP('',(#302708,#302709,#302710,#302711,#302712,#302713, + #302714,#302715,#302716)); +#302708 = ORIENTED_EDGE('',*,*,#302419,.T.); +#302709 = ORIENTED_EDGE('',*,*,#302450,.T.); +#302710 = ORIENTED_EDGE('',*,*,#302481,.T.); +#302711 = ORIENTED_EDGE('',*,*,#302513,.T.); +#302712 = ORIENTED_EDGE('',*,*,#302545,.T.); +#302713 = ORIENTED_EDGE('',*,*,#302576,.T.); +#302714 = ORIENTED_EDGE('',*,*,#302607,.T.); +#302715 = ORIENTED_EDGE('',*,*,#302639,.T.); +#302716 = ORIENTED_EDGE('',*,*,#302662,.T.); +#302717 = FACE_BOUND('',#302718,.F.); +#302718 = EDGE_LOOP('',(#302719)); +#302719 = ORIENTED_EDGE('',*,*,#302694,.T.); +#302720 = PLANE('',#302721); +#302721 = AXIS2_PLACEMENT_3D('',#302722,#302723,#302724); +#302722 = CARTESIAN_POINT('',(0.,0.,0.)); +#302723 = DIRECTION('',(-0.,-0.,-1.)); +#302724 = DIRECTION('',(-1.,0.,0.)); +#302725 = ADVANCED_FACE('',(#302726,#302737),#302740,.T.); +#302726 = FACE_BOUND('',#302727,.T.); +#302727 = EDGE_LOOP('',(#302728,#302729,#302730,#302731,#302732,#302733, + #302734,#302735,#302736)); +#302728 = ORIENTED_EDGE('',*,*,#302403,.T.); +#302729 = ORIENTED_EDGE('',*,*,#302434,.T.); +#302730 = ORIENTED_EDGE('',*,*,#302465,.T.); +#302731 = ORIENTED_EDGE('',*,*,#302496,.T.); +#302732 = ORIENTED_EDGE('',*,*,#302529,.T.); +#302733 = ORIENTED_EDGE('',*,*,#302560,.T.); +#302734 = ORIENTED_EDGE('',*,*,#302591,.T.); +#302735 = ORIENTED_EDGE('',*,*,#302622,.T.); +#302736 = ORIENTED_EDGE('',*,*,#302655,.T.); +#302737 = FACE_BOUND('',#302738,.T.); +#302738 = EDGE_LOOP('',(#302739)); +#302739 = ORIENTED_EDGE('',*,*,#302686,.T.); +#302740 = PLANE('',#302741); +#302741 = AXIS2_PLACEMENT_3D('',#302742,#302743,#302744); +#302742 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#302743 = DIRECTION('',(-0.,-0.,-1.)); +#302744 = DIRECTION('',(-1.,0.,0.)); +#302745 = MANIFOLD_SOLID_BREP('',#302746); +#302746 = CLOSED_SHELL('',(#302747,#302787,#302820,#302851,#302882, + #302915,#302946,#302977,#303008,#303039,#303072,#303103,#303134, + #303165,#303198,#303220,#303253,#303279)); +#302747 = ADVANCED_FACE('',(#302748),#302782,.F.); +#302748 = FACE_BOUND('',#302749,.F.); +#302749 = EDGE_LOOP('',(#302750,#302760,#302768,#302776)); +#302750 = ORIENTED_EDGE('',*,*,#302751,.T.); +#302751 = EDGE_CURVE('',#302752,#302754,#302756,.T.); +#302752 = VERTEX_POINT('',#302753); +#302753 = CARTESIAN_POINT('',(147.7695,-119.128078,0.)); +#302754 = VERTEX_POINT('',#302755); +#302755 = CARTESIAN_POINT('',(147.7695,-119.128078,-3.5E-02)); +#302756 = LINE('',#302757,#302758); +#302757 = CARTESIAN_POINT('',(147.7695,-119.128078,0.)); +#302758 = VECTOR('',#302759,1.); +#302759 = DIRECTION('',(0.,0.,-1.)); +#302760 = ORIENTED_EDGE('',*,*,#302761,.T.); +#302761 = EDGE_CURVE('',#302754,#302762,#302764,.T.); +#302762 = VERTEX_POINT('',#302763); +#302763 = CARTESIAN_POINT('',(148.583148,-119.944443,-3.5E-02)); +#302764 = LINE('',#302765,#302766); +#302765 = CARTESIAN_POINT('',(147.7695,-119.128078,-3.5E-02)); +#302766 = VECTOR('',#302767,1.); +#302767 = DIRECTION('',(0.705927154004,-0.708284443737,0.)); +#302768 = ORIENTED_EDGE('',*,*,#302769,.F.); +#302769 = EDGE_CURVE('',#302770,#302762,#302772,.T.); +#302770 = VERTEX_POINT('',#302771); +#302771 = CARTESIAN_POINT('',(148.583148,-119.944443,0.)); +#302772 = LINE('',#302773,#302774); +#302773 = CARTESIAN_POINT('',(148.583148,-119.944443,0.)); +#302774 = VECTOR('',#302775,1.); +#302775 = DIRECTION('',(0.,0.,-1.)); +#302776 = ORIENTED_EDGE('',*,*,#302777,.F.); +#302777 = EDGE_CURVE('',#302752,#302770,#302778,.T.); +#302778 = LINE('',#302779,#302780); +#302779 = CARTESIAN_POINT('',(147.7695,-119.128078,0.)); +#302780 = VECTOR('',#302781,1.); +#302781 = DIRECTION('',(0.705927154004,-0.708284443737,0.)); +#302782 = PLANE('',#302783); +#302783 = AXIS2_PLACEMENT_3D('',#302784,#302785,#302786); +#302784 = CARTESIAN_POINT('',(147.7695,-119.128078,0.)); +#302785 = DIRECTION('',(-0.708284443737,-0.705927154004,-0.)); +#302786 = DIRECTION('',(0.705927154004,-0.708284443737,0.)); +#302787 = ADVANCED_FACE('',(#302788),#302815,.T.); +#302788 = FACE_BOUND('',#302789,.F.); +#302789 = EDGE_LOOP('',(#302790,#302791,#302800,#302808)); +#302790 = ORIENTED_EDGE('',*,*,#302769,.T.); +#302791 = ORIENTED_EDGE('',*,*,#302792,.T.); +#302792 = EDGE_CURVE('',#302762,#302793,#302795,.T.); +#302793 = VERTEX_POINT('',#302794); +#302794 = CARTESIAN_POINT('',(148.444443,-120.083148,-3.5E-02)); +#302795 = CIRCLE('',#302796,0.10000071281); +#302796 = AXIS2_PLACEMENT_3D('',#302797,#302798,#302799); +#302797 = CARTESIAN_POINT('',(148.5000005,-120.0000005,-3.5E-02)); +#302798 = DIRECTION('',(0.,0.,-1.)); +#302799 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#302800 = ORIENTED_EDGE('',*,*,#302801,.F.); +#302801 = EDGE_CURVE('',#302802,#302793,#302804,.T.); +#302802 = VERTEX_POINT('',#302803); +#302803 = CARTESIAN_POINT('',(148.444443,-120.083148,0.)); +#302804 = LINE('',#302805,#302806); +#302805 = CARTESIAN_POINT('',(148.444443,-120.083148,0.)); +#302806 = VECTOR('',#302807,1.); +#302807 = DIRECTION('',(0.,0.,-1.)); +#302808 = ORIENTED_EDGE('',*,*,#302809,.F.); +#302809 = EDGE_CURVE('',#302770,#302802,#302810,.T.); +#302810 = CIRCLE('',#302811,0.10000071281); +#302811 = AXIS2_PLACEMENT_3D('',#302812,#302813,#302814); +#302812 = CARTESIAN_POINT('',(148.5000005,-120.0000005,0.)); +#302813 = DIRECTION('',(0.,0.,-1.)); +#302814 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#302815 = CYLINDRICAL_SURFACE('',#302816,0.10000071281); +#302816 = AXIS2_PLACEMENT_3D('',#302817,#302818,#302819); +#302817 = CARTESIAN_POINT('',(148.5000005,-120.0000005,0.)); +#302818 = DIRECTION('',(-0.,-0.,1.)); +#302819 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#302820 = ADVANCED_FACE('',(#302821),#302846,.F.); +#302821 = FACE_BOUND('',#302822,.F.); +#302822 = EDGE_LOOP('',(#302823,#302824,#302832,#302840)); +#302823 = ORIENTED_EDGE('',*,*,#302801,.T.); +#302824 = ORIENTED_EDGE('',*,*,#302825,.T.); +#302825 = EDGE_CURVE('',#302793,#302826,#302828,.T.); +#302826 = VERTEX_POINT('',#302827); +#302827 = CARTESIAN_POINT('',(147.628078,-119.2695,-3.5E-02)); +#302828 = LINE('',#302829,#302830); +#302829 = CARTESIAN_POINT('',(148.444443,-120.083148,-3.5E-02)); +#302830 = VECTOR('',#302831,1.); +#302831 = DIRECTION('',(-0.708284443737,0.705927154004,0.)); +#302832 = ORIENTED_EDGE('',*,*,#302833,.F.); +#302833 = EDGE_CURVE('',#302834,#302826,#302836,.T.); +#302834 = VERTEX_POINT('',#302835); +#302835 = CARTESIAN_POINT('',(147.628078,-119.2695,0.)); +#302836 = LINE('',#302837,#302838); +#302837 = CARTESIAN_POINT('',(147.628078,-119.2695,0.)); +#302838 = VECTOR('',#302839,1.); +#302839 = DIRECTION('',(0.,0.,-1.)); +#302840 = ORIENTED_EDGE('',*,*,#302841,.F.); +#302841 = EDGE_CURVE('',#302802,#302834,#302842,.T.); +#302842 = LINE('',#302843,#302844); +#302843 = CARTESIAN_POINT('',(148.444443,-120.083148,0.)); +#302844 = VECTOR('',#302845,1.); +#302845 = DIRECTION('',(-0.708284443737,0.705927154004,0.)); +#302846 = PLANE('',#302847); +#302847 = AXIS2_PLACEMENT_3D('',#302848,#302849,#302850); +#302848 = CARTESIAN_POINT('',(148.444443,-120.083148,0.)); +#302849 = DIRECTION('',(0.705927154004,0.708284443737,0.)); +#302850 = DIRECTION('',(-0.708284443737,0.705927154004,0.)); +#302851 = ADVANCED_FACE('',(#302852),#302877,.F.); +#302852 = FACE_BOUND('',#302853,.F.); +#302853 = EDGE_LOOP('',(#302854,#302855,#302863,#302871)); +#302854 = ORIENTED_EDGE('',*,*,#302833,.T.); +#302855 = ORIENTED_EDGE('',*,*,#302856,.T.); +#302856 = EDGE_CURVE('',#302826,#302857,#302859,.T.); +#302857 = VERTEX_POINT('',#302858); +#302858 = CARTESIAN_POINT('',(147.614805,-119.277164,-3.5E-02)); +#302859 = LINE('',#302860,#302861); +#302860 = CARTESIAN_POINT('',(147.628078,-119.2695,-3.5E-02)); +#302861 = VECTOR('',#302862,1.); +#302862 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302863 = ORIENTED_EDGE('',*,*,#302864,.F.); +#302864 = EDGE_CURVE('',#302865,#302857,#302867,.T.); +#302865 = VERTEX_POINT('',#302866); +#302866 = CARTESIAN_POINT('',(147.614805,-119.277164,0.)); +#302867 = LINE('',#302868,#302869); +#302868 = CARTESIAN_POINT('',(147.614805,-119.277164,0.)); +#302869 = VECTOR('',#302870,1.); +#302870 = DIRECTION('',(0.,0.,-1.)); +#302871 = ORIENTED_EDGE('',*,*,#302872,.F.); +#302872 = EDGE_CURVE('',#302834,#302865,#302873,.T.); +#302873 = LINE('',#302874,#302875); +#302874 = CARTESIAN_POINT('',(147.628078,-119.2695,0.)); +#302875 = VECTOR('',#302876,1.); +#302876 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302877 = PLANE('',#302878); +#302878 = AXIS2_PLACEMENT_3D('',#302879,#302880,#302881); +#302879 = CARTESIAN_POINT('',(147.628078,-119.2695,0.)); +#302880 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#302881 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#302882 = ADVANCED_FACE('',(#302883),#302910,.T.); +#302883 = FACE_BOUND('',#302884,.F.); +#302884 = EDGE_LOOP('',(#302885,#302886,#302895,#302903)); +#302885 = ORIENTED_EDGE('',*,*,#302864,.T.); +#302886 = ORIENTED_EDGE('',*,*,#302887,.T.); +#302887 = EDGE_CURVE('',#302857,#302888,#302890,.T.); +#302888 = VERTEX_POINT('',#302889); +#302889 = CARTESIAN_POINT('',(147.385195,-119.277164,-3.5E-02)); +#302890 = CIRCLE('',#302891,0.300007695316); +#302891 = AXIS2_PLACEMENT_3D('',#302892,#302893,#302894); +#302892 = CARTESIAN_POINT('',(147.5,-118.9999917986,-3.5E-02)); +#302893 = DIRECTION('',(-0.,0.,-1.)); +#302894 = DIRECTION('',(0.382673517354,-0.923883639381,-0.)); +#302895 = ORIENTED_EDGE('',*,*,#302896,.F.); +#302896 = EDGE_CURVE('',#302897,#302888,#302899,.T.); +#302897 = VERTEX_POINT('',#302898); +#302898 = CARTESIAN_POINT('',(147.385195,-119.277164,0.)); +#302899 = LINE('',#302900,#302901); +#302900 = CARTESIAN_POINT('',(147.385195,-119.277164,0.)); +#302901 = VECTOR('',#302902,1.); +#302902 = DIRECTION('',(0.,0.,-1.)); +#302903 = ORIENTED_EDGE('',*,*,#302904,.F.); +#302904 = EDGE_CURVE('',#302865,#302897,#302905,.T.); +#302905 = CIRCLE('',#302906,0.300007695316); +#302906 = AXIS2_PLACEMENT_3D('',#302907,#302908,#302909); +#302907 = CARTESIAN_POINT('',(147.5,-118.9999917986,0.)); +#302908 = DIRECTION('',(-0.,0.,-1.)); +#302909 = DIRECTION('',(0.382673517354,-0.923883639381,-0.)); +#302910 = CYLINDRICAL_SURFACE('',#302911,0.300007695316); +#302911 = AXIS2_PLACEMENT_3D('',#302912,#302913,#302914); +#302912 = CARTESIAN_POINT('',(147.5,-118.9999917986,0.)); +#302913 = DIRECTION('',(0.,-0.,1.)); +#302914 = DIRECTION('',(0.382673517354,-0.923883639381,-0.)); +#302915 = ADVANCED_FACE('',(#302916),#302941,.F.); +#302916 = FACE_BOUND('',#302917,.F.); +#302917 = EDGE_LOOP('',(#302918,#302919,#302927,#302935)); +#302918 = ORIENTED_EDGE('',*,*,#302896,.T.); +#302919 = ORIENTED_EDGE('',*,*,#302920,.T.); +#302920 = EDGE_CURVE('',#302888,#302921,#302923,.T.); +#302921 = VERTEX_POINT('',#302922); +#302922 = CARTESIAN_POINT('',(147.371921,-119.2695,-3.5E-02)); +#302923 = LINE('',#302924,#302925); +#302924 = CARTESIAN_POINT('',(147.385195,-119.277164,-3.5E-02)); +#302925 = VECTOR('',#302926,1.); +#302926 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#302927 = ORIENTED_EDGE('',*,*,#302928,.F.); +#302928 = EDGE_CURVE('',#302929,#302921,#302931,.T.); +#302929 = VERTEX_POINT('',#302930); +#302930 = CARTESIAN_POINT('',(147.371921,-119.2695,0.)); +#302931 = LINE('',#302932,#302933); +#302932 = CARTESIAN_POINT('',(147.371921,-119.2695,0.)); +#302933 = VECTOR('',#302934,1.); +#302934 = DIRECTION('',(0.,0.,-1.)); +#302935 = ORIENTED_EDGE('',*,*,#302936,.F.); +#302936 = EDGE_CURVE('',#302897,#302929,#302937,.T.); +#302937 = LINE('',#302938,#302939); +#302938 = CARTESIAN_POINT('',(147.385195,-119.277164,0.)); +#302939 = VECTOR('',#302940,1.); +#302940 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#302941 = PLANE('',#302942); +#302942 = AXIS2_PLACEMENT_3D('',#302943,#302944,#302945); +#302943 = CARTESIAN_POINT('',(147.385195,-119.277164,0.)); +#302944 = DIRECTION('',(0.500012356405,0.866018269693,0.)); +#302945 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#302946 = ADVANCED_FACE('',(#302947),#302972,.F.); +#302947 = FACE_BOUND('',#302948,.F.); +#302948 = EDGE_LOOP('',(#302949,#302950,#302958,#302966)); +#302949 = ORIENTED_EDGE('',*,*,#302928,.T.); +#302950 = ORIENTED_EDGE('',*,*,#302951,.T.); +#302951 = EDGE_CURVE('',#302921,#302952,#302954,.T.); +#302952 = VERTEX_POINT('',#302953); +#302953 = CARTESIAN_POINT('',(146.755557,-119.883147,-3.5E-02)); +#302954 = LINE('',#302955,#302956); +#302955 = CARTESIAN_POINT('',(147.371921,-119.2695,-3.5E-02)); +#302956 = VECTOR('',#302957,1.); +#302957 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#302958 = ORIENTED_EDGE('',*,*,#302959,.F.); +#302959 = EDGE_CURVE('',#302960,#302952,#302962,.T.); +#302960 = VERTEX_POINT('',#302961); +#302961 = CARTESIAN_POINT('',(146.755557,-119.883147,0.)); +#302962 = LINE('',#302963,#302964); +#302963 = CARTESIAN_POINT('',(146.755557,-119.883147,0.)); +#302964 = VECTOR('',#302965,1.); +#302965 = DIRECTION('',(0.,0.,-1.)); +#302966 = ORIENTED_EDGE('',*,*,#302967,.F.); +#302967 = EDGE_CURVE('',#302929,#302960,#302968,.T.); +#302968 = LINE('',#302969,#302970); +#302969 = CARTESIAN_POINT('',(147.371921,-119.2695,0.)); +#302970 = VECTOR('',#302971,1.); +#302971 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#302972 = PLANE('',#302973); +#302973 = AXIS2_PLACEMENT_3D('',#302974,#302975,#302976); +#302974 = CARTESIAN_POINT('',(147.371921,-119.2695,0.)); +#302975 = DIRECTION('',(-0.705543115226,0.708666996943,0.)); +#302976 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#302977 = ADVANCED_FACE('',(#302978),#303003,.F.); +#302978 = FACE_BOUND('',#302979,.F.); +#302979 = EDGE_LOOP('',(#302980,#302981,#302989,#302997)); +#302980 = ORIENTED_EDGE('',*,*,#302959,.T.); +#302981 = ORIENTED_EDGE('',*,*,#302982,.T.); +#302982 = EDGE_CURVE('',#302952,#302983,#302985,.T.); +#302983 = VERTEX_POINT('',#302984); +#302984 = CARTESIAN_POINT('',(146.719509,-119.898079,-3.5E-02)); +#302985 = LINE('',#302986,#302987); +#302986 = CARTESIAN_POINT('',(146.755557,-119.883147,-3.5E-02)); +#302987 = VECTOR('',#302988,1.); +#302988 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#302989 = ORIENTED_EDGE('',*,*,#302990,.F.); +#302990 = EDGE_CURVE('',#302991,#302983,#302993,.T.); +#302991 = VERTEX_POINT('',#302992); +#302992 = CARTESIAN_POINT('',(146.719509,-119.898079,0.)); +#302993 = LINE('',#302994,#302995); +#302994 = CARTESIAN_POINT('',(146.719509,-119.898079,0.)); +#302995 = VECTOR('',#302996,1.); +#302996 = DIRECTION('',(0.,0.,-1.)); +#302997 = ORIENTED_EDGE('',*,*,#302998,.F.); +#302998 = EDGE_CURVE('',#302960,#302991,#302999,.T.); +#302999 = LINE('',#303000,#303001); +#303000 = CARTESIAN_POINT('',(146.755557,-119.883147,0.)); +#303001 = VECTOR('',#303002,1.); +#303002 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#303003 = PLANE('',#303004); +#303004 = AXIS2_PLACEMENT_3D('',#303005,#303006,#303007); +#303005 = CARTESIAN_POINT('',(146.755557,-119.883147,0.)); +#303006 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#303007 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#303008 = ADVANCED_FACE('',(#303009),#303034,.F.); +#303009 = FACE_BOUND('',#303010,.F.); +#303010 = EDGE_LOOP('',(#303011,#303012,#303020,#303028)); +#303011 = ORIENTED_EDGE('',*,*,#302990,.T.); +#303012 = ORIENTED_EDGE('',*,*,#303013,.T.); +#303013 = EDGE_CURVE('',#302983,#303014,#303016,.T.); +#303014 = VERTEX_POINT('',#303015); +#303015 = CARTESIAN_POINT('',(146.430491,-119.898079,-3.5E-02)); +#303016 = LINE('',#303017,#303018); +#303017 = CARTESIAN_POINT('',(146.719509,-119.898079,-3.5E-02)); +#303018 = VECTOR('',#303019,1.); +#303019 = DIRECTION('',(-1.,0.,0.)); +#303020 = ORIENTED_EDGE('',*,*,#303021,.F.); +#303021 = EDGE_CURVE('',#303022,#303014,#303024,.T.); +#303022 = VERTEX_POINT('',#303023); +#303023 = CARTESIAN_POINT('',(146.430491,-119.898079,0.)); +#303024 = LINE('',#303025,#303026); +#303025 = CARTESIAN_POINT('',(146.430491,-119.898079,0.)); +#303026 = VECTOR('',#303027,1.); +#303027 = DIRECTION('',(0.,0.,-1.)); +#303028 = ORIENTED_EDGE('',*,*,#303029,.F.); +#303029 = EDGE_CURVE('',#302991,#303022,#303030,.T.); +#303030 = LINE('',#303031,#303032); +#303031 = CARTESIAN_POINT('',(146.719509,-119.898079,0.)); +#303032 = VECTOR('',#303033,1.); +#303033 = DIRECTION('',(-1.,0.,0.)); +#303034 = PLANE('',#303035); +#303035 = AXIS2_PLACEMENT_3D('',#303036,#303037,#303038); +#303036 = CARTESIAN_POINT('',(146.719509,-119.898079,0.)); +#303037 = DIRECTION('',(0.,1.,0.)); +#303038 = DIRECTION('',(-1.,0.,0.)); +#303039 = ADVANCED_FACE('',(#303040),#303067,.T.); +#303040 = FACE_BOUND('',#303041,.F.); +#303041 = EDGE_LOOP('',(#303042,#303043,#303052,#303060)); +#303042 = ORIENTED_EDGE('',*,*,#303021,.T.); +#303043 = ORIENTED_EDGE('',*,*,#303044,.T.); +#303044 = EDGE_CURVE('',#303014,#303045,#303047,.T.); +#303045 = VERTEX_POINT('',#303046); +#303046 = CARTESIAN_POINT('',(146.430491,-119.701921,-3.5E-02)); +#303047 = CIRCLE('',#303048,0.100000456609); +#303048 = AXIS2_PLACEMENT_3D('',#303049,#303050,#303051); +#303049 = CARTESIAN_POINT('',(146.45,-119.8,-3.5E-02)); +#303050 = DIRECTION('',(0.,0.,-1.)); +#303051 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303052 = ORIENTED_EDGE('',*,*,#303053,.F.); +#303053 = EDGE_CURVE('',#303054,#303045,#303056,.T.); +#303054 = VERTEX_POINT('',#303055); +#303055 = CARTESIAN_POINT('',(146.430491,-119.701921,0.)); +#303056 = LINE('',#303057,#303058); +#303057 = CARTESIAN_POINT('',(146.430491,-119.701921,0.)); +#303058 = VECTOR('',#303059,1.); +#303059 = DIRECTION('',(0.,0.,-1.)); +#303060 = ORIENTED_EDGE('',*,*,#303061,.F.); +#303061 = EDGE_CURVE('',#303022,#303054,#303062,.T.); +#303062 = CIRCLE('',#303063,0.100000456609); +#303063 = AXIS2_PLACEMENT_3D('',#303064,#303065,#303066); +#303064 = CARTESIAN_POINT('',(146.45,-119.8,0.)); +#303065 = DIRECTION('',(0.,0.,-1.)); +#303066 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303067 = CYLINDRICAL_SURFACE('',#303068,0.100000456609); +#303068 = AXIS2_PLACEMENT_3D('',#303069,#303070,#303071); +#303069 = CARTESIAN_POINT('',(146.45,-119.8,0.)); +#303070 = DIRECTION('',(-0.,-0.,1.)); +#303071 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303072 = ADVANCED_FACE('',(#303073),#303098,.F.); +#303073 = FACE_BOUND('',#303074,.F.); +#303074 = EDGE_LOOP('',(#303075,#303076,#303084,#303092)); +#303075 = ORIENTED_EDGE('',*,*,#303053,.T.); +#303076 = ORIENTED_EDGE('',*,*,#303077,.T.); +#303077 = EDGE_CURVE('',#303045,#303078,#303080,.T.); +#303078 = VERTEX_POINT('',#303079); +#303079 = CARTESIAN_POINT('',(146.658578,-119.7,-3.5E-02)); +#303080 = LINE('',#303081,#303082); +#303081 = CARTESIAN_POINT('',(146.430491,-119.701921,-3.5E-02)); +#303082 = VECTOR('',#303083,1.); +#303083 = DIRECTION('',(0.999964534951,8.421926158162E-03,0.)); +#303084 = ORIENTED_EDGE('',*,*,#303085,.F.); +#303085 = EDGE_CURVE('',#303086,#303078,#303088,.T.); +#303086 = VERTEX_POINT('',#303087); +#303087 = CARTESIAN_POINT('',(146.658578,-119.7,0.)); +#303088 = LINE('',#303089,#303090); +#303089 = CARTESIAN_POINT('',(146.658578,-119.7,0.)); +#303090 = VECTOR('',#303091,1.); +#303091 = DIRECTION('',(0.,0.,-1.)); +#303092 = ORIENTED_EDGE('',*,*,#303093,.F.); +#303093 = EDGE_CURVE('',#303054,#303086,#303094,.T.); +#303094 = LINE('',#303095,#303096); +#303095 = CARTESIAN_POINT('',(146.430491,-119.701921,0.)); +#303096 = VECTOR('',#303097,1.); +#303097 = DIRECTION('',(0.999964534951,8.421926158162E-03,0.)); +#303098 = PLANE('',#303099); +#303099 = AXIS2_PLACEMENT_3D('',#303100,#303101,#303102); +#303100 = CARTESIAN_POINT('',(146.430491,-119.701921,0.)); +#303101 = DIRECTION('',(8.421926158162E-03,-0.999964534951,0.)); +#303102 = DIRECTION('',(0.999964534951,8.421926158162E-03,0.)); +#303103 = ADVANCED_FACE('',(#303104),#303129,.F.); +#303104 = FACE_BOUND('',#303105,.F.); +#303105 = EDGE_LOOP('',(#303106,#303107,#303115,#303123)); +#303106 = ORIENTED_EDGE('',*,*,#303085,.T.); +#303107 = ORIENTED_EDGE('',*,*,#303108,.T.); +#303108 = EDGE_CURVE('',#303078,#303109,#303111,.T.); +#303109 = VERTEX_POINT('',#303110); +#303110 = CARTESIAN_POINT('',(147.230499,-119.128078,-3.5E-02)); +#303111 = LINE('',#303112,#303113); +#303112 = CARTESIAN_POINT('',(146.658578,-119.7,-3.5E-02)); +#303113 = VECTOR('',#303114,1.); +#303114 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#303115 = ORIENTED_EDGE('',*,*,#303116,.F.); +#303116 = EDGE_CURVE('',#303117,#303109,#303119,.T.); +#303117 = VERTEX_POINT('',#303118); +#303118 = CARTESIAN_POINT('',(147.230499,-119.128078,0.)); +#303119 = LINE('',#303120,#303121); +#303120 = CARTESIAN_POINT('',(147.230499,-119.128078,0.)); +#303121 = VECTOR('',#303122,1.); +#303122 = DIRECTION('',(0.,0.,-1.)); +#303123 = ORIENTED_EDGE('',*,*,#303124,.F.); +#303124 = EDGE_CURVE('',#303086,#303117,#303125,.T.); +#303125 = LINE('',#303126,#303127); +#303126 = CARTESIAN_POINT('',(146.658578,-119.7,0.)); +#303127 = VECTOR('',#303128,1.); +#303128 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#303129 = PLANE('',#303130); +#303130 = AXIS2_PLACEMENT_3D('',#303131,#303132,#303133); +#303131 = CARTESIAN_POINT('',(146.658578,-119.7,0.)); +#303132 = DIRECTION('',(0.707107399371,-0.707106163001,0.)); +#303133 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#303134 = ADVANCED_FACE('',(#303135),#303160,.F.); +#303135 = FACE_BOUND('',#303136,.F.); +#303136 = EDGE_LOOP('',(#303137,#303138,#303146,#303154)); +#303137 = ORIENTED_EDGE('',*,*,#303116,.T.); +#303138 = ORIENTED_EDGE('',*,*,#303139,.T.); +#303139 = EDGE_CURVE('',#303109,#303140,#303142,.T.); +#303140 = VERTEX_POINT('',#303141); +#303141 = CARTESIAN_POINT('',(147.222836,-119.114805,-3.5E-02)); +#303142 = LINE('',#303143,#303144); +#303143 = CARTESIAN_POINT('',(147.230499,-119.128078,-3.5E-02)); +#303144 = VECTOR('',#303145,1.); +#303145 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#303146 = ORIENTED_EDGE('',*,*,#303147,.F.); +#303147 = EDGE_CURVE('',#303148,#303140,#303150,.T.); +#303148 = VERTEX_POINT('',#303149); +#303149 = CARTESIAN_POINT('',(147.222836,-119.114805,0.)); +#303150 = LINE('',#303151,#303152); +#303151 = CARTESIAN_POINT('',(147.222836,-119.114805,0.)); +#303152 = VECTOR('',#303153,1.); +#303153 = DIRECTION('',(0.,0.,-1.)); +#303154 = ORIENTED_EDGE('',*,*,#303155,.F.); +#303155 = EDGE_CURVE('',#303117,#303148,#303156,.T.); +#303156 = LINE('',#303157,#303158); +#303157 = CARTESIAN_POINT('',(147.230499,-119.128078,0.)); +#303158 = VECTOR('',#303159,1.); +#303159 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#303160 = PLANE('',#303161); +#303161 = AXIS2_PLACEMENT_3D('',#303162,#303163,#303164); +#303162 = CARTESIAN_POINT('',(147.230499,-119.128078,0.)); +#303163 = DIRECTION('',(0.866030210228,0.499991674903,0.)); +#303164 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#303165 = ADVANCED_FACE('',(#303166),#303193,.T.); +#303166 = FACE_BOUND('',#303167,.F.); +#303167 = EDGE_LOOP('',(#303168,#303169,#303178,#303186)); +#303168 = ORIENTED_EDGE('',*,*,#303147,.T.); +#303169 = ORIENTED_EDGE('',*,*,#303170,.T.); +#303170 = EDGE_CURVE('',#303140,#303171,#303173,.T.); +#303171 = VERTEX_POINT('',#303172); +#303172 = CARTESIAN_POINT('',(147.777164,-119.114805,-3.5E-02)); +#303173 = CIRCLE('',#303174,0.300000118202); +#303174 = AXIS2_PLACEMENT_3D('',#303175,#303176,#303177); +#303175 = CARTESIAN_POINT('',(147.5,-119.,-3.5E-02)); +#303176 = DIRECTION('',(0.,0.,-1.)); +#303177 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#303178 = ORIENTED_EDGE('',*,*,#303179,.F.); +#303179 = EDGE_CURVE('',#303180,#303171,#303182,.T.); +#303180 = VERTEX_POINT('',#303181); +#303181 = CARTESIAN_POINT('',(147.777164,-119.114805,0.)); +#303182 = LINE('',#303183,#303184); +#303183 = CARTESIAN_POINT('',(147.777164,-119.114805,0.)); +#303184 = VECTOR('',#303185,1.); +#303185 = DIRECTION('',(0.,0.,-1.)); +#303186 = ORIENTED_EDGE('',*,*,#303187,.F.); +#303187 = EDGE_CURVE('',#303148,#303180,#303188,.T.); +#303188 = CIRCLE('',#303189,0.300000118202); +#303189 = AXIS2_PLACEMENT_3D('',#303190,#303191,#303192); +#303190 = CARTESIAN_POINT('',(147.5,-119.,0.)); +#303191 = DIRECTION('',(0.,0.,-1.)); +#303192 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#303193 = CYLINDRICAL_SURFACE('',#303194,0.300000118202); +#303194 = AXIS2_PLACEMENT_3D('',#303195,#303196,#303197); +#303195 = CARTESIAN_POINT('',(147.5,-119.,0.)); +#303196 = DIRECTION('',(-0.,-0.,1.)); +#303197 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#303198 = ADVANCED_FACE('',(#303199),#303215,.F.); +#303199 = FACE_BOUND('',#303200,.F.); +#303200 = EDGE_LOOP('',(#303201,#303202,#303208,#303209)); +#303201 = ORIENTED_EDGE('',*,*,#303179,.T.); +#303202 = ORIENTED_EDGE('',*,*,#303203,.T.); +#303203 = EDGE_CURVE('',#303171,#302754,#303204,.T.); +#303204 = LINE('',#303205,#303206); +#303205 = CARTESIAN_POINT('',(147.777164,-119.114805,-3.5E-02)); +#303206 = VECTOR('',#303207,1.); +#303207 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#303208 = ORIENTED_EDGE('',*,*,#302751,.F.); +#303209 = ORIENTED_EDGE('',*,*,#303210,.F.); +#303210 = EDGE_CURVE('',#303180,#302752,#303211,.T.); +#303211 = LINE('',#303212,#303213); +#303212 = CARTESIAN_POINT('',(147.777164,-119.114805,0.)); +#303213 = VECTOR('',#303214,1.); +#303214 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#303215 = PLANE('',#303216); +#303216 = AXIS2_PLACEMENT_3D('',#303217,#303218,#303219); +#303217 = CARTESIAN_POINT('',(147.777164,-119.114805,0.)); +#303218 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#303219 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#303220 = ADVANCED_FACE('',(#303221),#303248,.F.); +#303221 = FACE_BOUND('',#303222,.F.); +#303222 = EDGE_LOOP('',(#303223,#303233,#303240,#303241)); +#303223 = ORIENTED_EDGE('',*,*,#303224,.T.); +#303224 = EDGE_CURVE('',#303225,#303227,#303229,.T.); +#303225 = VERTEX_POINT('',#303226); +#303226 = CARTESIAN_POINT('',(147.637255,-119.,0.)); +#303227 = VERTEX_POINT('',#303228); +#303228 = CARTESIAN_POINT('',(147.637255,-119.,-3.5E-02)); +#303229 = LINE('',#303230,#303231); +#303230 = CARTESIAN_POINT('',(147.637255,-119.,0.)); +#303231 = VECTOR('',#303232,1.); +#303232 = DIRECTION('',(0.,0.,-1.)); +#303233 = ORIENTED_EDGE('',*,*,#303234,.T.); +#303234 = EDGE_CURVE('',#303227,#303227,#303235,.T.); +#303235 = CIRCLE('',#303236,0.137255); +#303236 = AXIS2_PLACEMENT_3D('',#303237,#303238,#303239); +#303237 = CARTESIAN_POINT('',(147.5,-119.,-3.5E-02)); +#303238 = DIRECTION('',(0.,0.,1.)); +#303239 = DIRECTION('',(1.,0.,-0.)); +#303240 = ORIENTED_EDGE('',*,*,#303224,.F.); +#303241 = ORIENTED_EDGE('',*,*,#303242,.F.); +#303242 = EDGE_CURVE('',#303225,#303225,#303243,.T.); +#303243 = CIRCLE('',#303244,0.137255); +#303244 = AXIS2_PLACEMENT_3D('',#303245,#303246,#303247); +#303245 = CARTESIAN_POINT('',(147.5,-119.,0.)); +#303246 = DIRECTION('',(0.,0.,1.)); +#303247 = DIRECTION('',(1.,0.,-0.)); +#303248 = CYLINDRICAL_SURFACE('',#303249,0.137255); +#303249 = AXIS2_PLACEMENT_3D('',#303250,#303251,#303252); +#303250 = CARTESIAN_POINT('',(147.5,-119.,0.)); +#303251 = DIRECTION('',(0.,0.,1.)); +#303252 = DIRECTION('',(1.,0.,-0.)); +#303253 = ADVANCED_FACE('',(#303254,#303271),#303274,.F.); +#303254 = FACE_BOUND('',#303255,.F.); +#303255 = EDGE_LOOP('',(#303256,#303257,#303258,#303259,#303260,#303261, + #303262,#303263,#303264,#303265,#303266,#303267,#303268,#303269, + #303270)); +#303256 = ORIENTED_EDGE('',*,*,#302777,.T.); +#303257 = ORIENTED_EDGE('',*,*,#302809,.T.); +#303258 = ORIENTED_EDGE('',*,*,#302841,.T.); +#303259 = ORIENTED_EDGE('',*,*,#302872,.T.); +#303260 = ORIENTED_EDGE('',*,*,#302904,.T.); +#303261 = ORIENTED_EDGE('',*,*,#302936,.T.); +#303262 = ORIENTED_EDGE('',*,*,#302967,.T.); +#303263 = ORIENTED_EDGE('',*,*,#302998,.T.); +#303264 = ORIENTED_EDGE('',*,*,#303029,.T.); +#303265 = ORIENTED_EDGE('',*,*,#303061,.T.); +#303266 = ORIENTED_EDGE('',*,*,#303093,.T.); +#303267 = ORIENTED_EDGE('',*,*,#303124,.T.); +#303268 = ORIENTED_EDGE('',*,*,#303155,.T.); +#303269 = ORIENTED_EDGE('',*,*,#303187,.T.); +#303270 = ORIENTED_EDGE('',*,*,#303210,.T.); +#303271 = FACE_BOUND('',#303272,.F.); +#303272 = EDGE_LOOP('',(#303273)); +#303273 = ORIENTED_EDGE('',*,*,#303242,.T.); +#303274 = PLANE('',#303275); +#303275 = AXIS2_PLACEMENT_3D('',#303276,#303277,#303278); +#303276 = CARTESIAN_POINT('',(0.,0.,0.)); +#303277 = DIRECTION('',(-0.,-0.,-1.)); +#303278 = DIRECTION('',(-1.,0.,0.)); +#303279 = ADVANCED_FACE('',(#303280,#303297),#303300,.T.); +#303280 = FACE_BOUND('',#303281,.T.); +#303281 = EDGE_LOOP('',(#303282,#303283,#303284,#303285,#303286,#303287, + #303288,#303289,#303290,#303291,#303292,#303293,#303294,#303295, + #303296)); +#303282 = ORIENTED_EDGE('',*,*,#302761,.T.); +#303283 = ORIENTED_EDGE('',*,*,#302792,.T.); +#303284 = ORIENTED_EDGE('',*,*,#302825,.T.); +#303285 = ORIENTED_EDGE('',*,*,#302856,.T.); +#303286 = ORIENTED_EDGE('',*,*,#302887,.T.); +#303287 = ORIENTED_EDGE('',*,*,#302920,.T.); +#303288 = ORIENTED_EDGE('',*,*,#302951,.T.); +#303289 = ORIENTED_EDGE('',*,*,#302982,.T.); +#303290 = ORIENTED_EDGE('',*,*,#303013,.T.); +#303291 = ORIENTED_EDGE('',*,*,#303044,.T.); +#303292 = ORIENTED_EDGE('',*,*,#303077,.T.); +#303293 = ORIENTED_EDGE('',*,*,#303108,.T.); +#303294 = ORIENTED_EDGE('',*,*,#303139,.T.); +#303295 = ORIENTED_EDGE('',*,*,#303170,.T.); +#303296 = ORIENTED_EDGE('',*,*,#303203,.T.); +#303297 = FACE_BOUND('',#303298,.T.); +#303298 = EDGE_LOOP('',(#303299)); +#303299 = ORIENTED_EDGE('',*,*,#303234,.T.); +#303300 = PLANE('',#303301); +#303301 = AXIS2_PLACEMENT_3D('',#303302,#303303,#303304); +#303302 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#303303 = DIRECTION('',(-0.,-0.,-1.)); +#303304 = DIRECTION('',(-1.,0.,0.)); +#303305 = MANIFOLD_SOLID_BREP('',#303306); +#303306 = CLOSED_SHELL('',(#303307,#303349,#303380,#303413,#303444, + #303475,#303508,#303539,#303570,#303603,#303634,#303665,#303696, + #303727,#303758,#303780,#303813,#303839)); +#303307 = ADVANCED_FACE('',(#303308),#303344,.T.); +#303308 = FACE_BOUND('',#303309,.F.); +#303309 = EDGE_LOOP('',(#303310,#303320,#303329,#303337)); +#303310 = ORIENTED_EDGE('',*,*,#303311,.T.); +#303311 = EDGE_CURVE('',#303312,#303314,#303316,.T.); +#303312 = VERTEX_POINT('',#303313); +#303313 = CARTESIAN_POINT('',(134.030491,-119.498079,0.)); +#303314 = VERTEX_POINT('',#303315); +#303315 = CARTESIAN_POINT('',(134.030491,-119.498079,-3.5E-02)); +#303316 = LINE('',#303317,#303318); +#303317 = CARTESIAN_POINT('',(134.030491,-119.498079,0.)); +#303318 = VECTOR('',#303319,1.); +#303319 = DIRECTION('',(0.,0.,-1.)); +#303320 = ORIENTED_EDGE('',*,*,#303321,.T.); +#303321 = EDGE_CURVE('',#303314,#303322,#303324,.T.); +#303322 = VERTEX_POINT('',#303323); +#303323 = CARTESIAN_POINT('',(134.030491,-119.301921,-3.5E-02)); +#303324 = CIRCLE('',#303325,0.100000456609); +#303325 = AXIS2_PLACEMENT_3D('',#303326,#303327,#303328); +#303326 = CARTESIAN_POINT('',(134.05,-119.4,-3.5E-02)); +#303327 = DIRECTION('',(0.,0.,-1.)); +#303328 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303329 = ORIENTED_EDGE('',*,*,#303330,.F.); +#303330 = EDGE_CURVE('',#303331,#303322,#303333,.T.); +#303331 = VERTEX_POINT('',#303332); +#303332 = CARTESIAN_POINT('',(134.030491,-119.301921,0.)); +#303333 = LINE('',#303334,#303335); +#303334 = CARTESIAN_POINT('',(134.030491,-119.301921,0.)); +#303335 = VECTOR('',#303336,1.); +#303336 = DIRECTION('',(0.,0.,-1.)); +#303337 = ORIENTED_EDGE('',*,*,#303338,.F.); +#303338 = EDGE_CURVE('',#303312,#303331,#303339,.T.); +#303339 = CIRCLE('',#303340,0.100000456609); +#303340 = AXIS2_PLACEMENT_3D('',#303341,#303342,#303343); +#303341 = CARTESIAN_POINT('',(134.05,-119.4,0.)); +#303342 = DIRECTION('',(0.,0.,-1.)); +#303343 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303344 = CYLINDRICAL_SURFACE('',#303345,0.100000456609); +#303345 = AXIS2_PLACEMENT_3D('',#303346,#303347,#303348); +#303346 = CARTESIAN_POINT('',(134.05,-119.4,0.)); +#303347 = DIRECTION('',(-0.,-0.,1.)); +#303348 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#303349 = ADVANCED_FACE('',(#303350),#303375,.F.); +#303350 = FACE_BOUND('',#303351,.F.); +#303351 = EDGE_LOOP('',(#303352,#303353,#303361,#303369)); +#303352 = ORIENTED_EDGE('',*,*,#303330,.T.); +#303353 = ORIENTED_EDGE('',*,*,#303354,.T.); +#303354 = EDGE_CURVE('',#303322,#303355,#303357,.T.); +#303355 = VERTEX_POINT('',#303356); +#303356 = CARTESIAN_POINT('',(134.669509,-119.301921,-3.5E-02)); +#303357 = LINE('',#303358,#303359); +#303358 = CARTESIAN_POINT('',(134.030491,-119.301921,-3.5E-02)); +#303359 = VECTOR('',#303360,1.); +#303360 = DIRECTION('',(1.,0.,0.)); +#303361 = ORIENTED_EDGE('',*,*,#303362,.F.); +#303362 = EDGE_CURVE('',#303363,#303355,#303365,.T.); +#303363 = VERTEX_POINT('',#303364); +#303364 = CARTESIAN_POINT('',(134.669509,-119.301921,0.)); +#303365 = LINE('',#303366,#303367); +#303366 = CARTESIAN_POINT('',(134.669509,-119.301921,0.)); +#303367 = VECTOR('',#303368,1.); +#303368 = DIRECTION('',(0.,0.,-1.)); +#303369 = ORIENTED_EDGE('',*,*,#303370,.F.); +#303370 = EDGE_CURVE('',#303331,#303363,#303371,.T.); +#303371 = LINE('',#303372,#303373); +#303372 = CARTESIAN_POINT('',(134.030491,-119.301921,0.)); +#303373 = VECTOR('',#303374,1.); +#303374 = DIRECTION('',(1.,0.,0.)); +#303375 = PLANE('',#303376); +#303376 = AXIS2_PLACEMENT_3D('',#303377,#303378,#303379); +#303377 = CARTESIAN_POINT('',(134.030491,-119.301921,0.)); +#303378 = DIRECTION('',(0.,-1.,0.)); +#303379 = DIRECTION('',(1.,0.,0.)); +#303380 = ADVANCED_FACE('',(#303381),#303408,.T.); +#303381 = FACE_BOUND('',#303382,.F.); +#303382 = EDGE_LOOP('',(#303383,#303384,#303393,#303401)); +#303383 = ORIENTED_EDGE('',*,*,#303362,.T.); +#303384 = ORIENTED_EDGE('',*,*,#303385,.T.); +#303385 = EDGE_CURVE('',#303355,#303386,#303388,.T.); +#303386 = VERTEX_POINT('',#303387); +#303387 = CARTESIAN_POINT('',(134.798079,-119.430491,-3.5E-02)); +#303388 = CIRCLE('',#303389,0.191468187874); +#303389 = AXIS2_PLACEMENT_3D('',#303390,#303391,#303392); +#303390 = CARTESIAN_POINT('',(134.61464085376,-119.4853591462,-3.5E-02) + ); +#303391 = DIRECTION('',(0.,0.,-1.)); +#303392 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#303393 = ORIENTED_EDGE('',*,*,#303394,.F.); +#303394 = EDGE_CURVE('',#303395,#303386,#303397,.T.); +#303395 = VERTEX_POINT('',#303396); +#303396 = CARTESIAN_POINT('',(134.798079,-119.430491,0.)); +#303397 = LINE('',#303398,#303399); +#303398 = CARTESIAN_POINT('',(134.798079,-119.430491,0.)); +#303399 = VECTOR('',#303400,1.); +#303400 = DIRECTION('',(0.,0.,-1.)); +#303401 = ORIENTED_EDGE('',*,*,#303402,.F.); +#303402 = EDGE_CURVE('',#303363,#303395,#303403,.T.); +#303403 = CIRCLE('',#303404,0.191468187874); +#303404 = AXIS2_PLACEMENT_3D('',#303405,#303406,#303407); +#303405 = CARTESIAN_POINT('',(134.61464085376,-119.4853591462,0.)); +#303406 = DIRECTION('',(0.,0.,-1.)); +#303407 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#303408 = CYLINDRICAL_SURFACE('',#303409,0.191468187874); +#303409 = AXIS2_PLACEMENT_3D('',#303410,#303411,#303412); +#303410 = CARTESIAN_POINT('',(134.61464085376,-119.4853591462,0.)); +#303411 = DIRECTION('',(-0.,-0.,1.)); +#303412 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#303413 = ADVANCED_FACE('',(#303414),#303439,.F.); +#303414 = FACE_BOUND('',#303415,.F.); +#303415 = EDGE_LOOP('',(#303416,#303417,#303425,#303433)); +#303416 = ORIENTED_EDGE('',*,*,#303394,.T.); +#303417 = ORIENTED_EDGE('',*,*,#303418,.T.); +#303418 = EDGE_CURVE('',#303386,#303419,#303421,.T.); +#303419 = VERTEX_POINT('',#303420); +#303420 = CARTESIAN_POINT('',(134.8,-119.468869,-3.5E-02)); +#303421 = LINE('',#303422,#303423); +#303422 = CARTESIAN_POINT('',(134.798079,-119.430491,-3.5E-02)); +#303423 = VECTOR('',#303424,1.); +#303424 = DIRECTION('',(4.999213101394E-02,-0.998749611683,0.)); +#303425 = ORIENTED_EDGE('',*,*,#303426,.F.); +#303426 = EDGE_CURVE('',#303427,#303419,#303429,.T.); +#303427 = VERTEX_POINT('',#303428); +#303428 = CARTESIAN_POINT('',(134.8,-119.468869,0.)); +#303429 = LINE('',#303430,#303431); +#303430 = CARTESIAN_POINT('',(134.8,-119.468869,0.)); +#303431 = VECTOR('',#303432,1.); +#303432 = DIRECTION('',(0.,0.,-1.)); +#303433 = ORIENTED_EDGE('',*,*,#303434,.F.); +#303434 = EDGE_CURVE('',#303395,#303427,#303435,.T.); +#303435 = LINE('',#303436,#303437); +#303436 = CARTESIAN_POINT('',(134.798079,-119.430491,0.)); +#303437 = VECTOR('',#303438,1.); +#303438 = DIRECTION('',(4.999213101394E-02,-0.998749611683,0.)); +#303439 = PLANE('',#303440); +#303440 = AXIS2_PLACEMENT_3D('',#303441,#303442,#303443); +#303441 = CARTESIAN_POINT('',(134.798079,-119.430491,0.)); +#303442 = DIRECTION('',(-0.998749611683,-4.999213101394E-02,-0.)); +#303443 = DIRECTION('',(4.999213101394E-02,-0.998749611683,0.)); +#303444 = ADVANCED_FACE('',(#303445),#303470,.F.); +#303445 = FACE_BOUND('',#303446,.F.); +#303446 = EDGE_LOOP('',(#303447,#303448,#303456,#303464)); +#303447 = ORIENTED_EDGE('',*,*,#303426,.T.); +#303448 = ORIENTED_EDGE('',*,*,#303449,.T.); +#303449 = EDGE_CURVE('',#303419,#303450,#303452,.T.); +#303450 = VERTEX_POINT('',#303451); +#303451 = CARTESIAN_POINT('',(134.814805,-119.472836,-3.5E-02)); +#303452 = LINE('',#303453,#303454); +#303453 = CARTESIAN_POINT('',(134.8,-119.468869,-3.5E-02)); +#303454 = VECTOR('',#303455,1.); +#303455 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#303456 = ORIENTED_EDGE('',*,*,#303457,.F.); +#303457 = EDGE_CURVE('',#303458,#303450,#303460,.T.); +#303458 = VERTEX_POINT('',#303459); +#303459 = CARTESIAN_POINT('',(134.814805,-119.472836,0.)); +#303460 = LINE('',#303461,#303462); +#303461 = CARTESIAN_POINT('',(134.814805,-119.472836,0.)); +#303462 = VECTOR('',#303463,1.); +#303463 = DIRECTION('',(0.,0.,-1.)); +#303464 = ORIENTED_EDGE('',*,*,#303465,.F.); +#303465 = EDGE_CURVE('',#303427,#303458,#303466,.T.); +#303466 = LINE('',#303467,#303468); +#303467 = CARTESIAN_POINT('',(134.8,-119.468869,0.)); +#303468 = VECTOR('',#303469,1.); +#303469 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#303470 = PLANE('',#303471); +#303471 = AXIS2_PLACEMENT_3D('',#303472,#303473,#303474); +#303472 = CARTESIAN_POINT('',(134.8,-119.468869,0.)); +#303473 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#303474 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#303475 = ADVANCED_FACE('',(#303476),#303503,.T.); +#303476 = FACE_BOUND('',#303477,.F.); +#303477 = EDGE_LOOP('',(#303478,#303479,#303488,#303496)); +#303478 = ORIENTED_EDGE('',*,*,#303457,.T.); +#303479 = ORIENTED_EDGE('',*,*,#303480,.T.); +#303480 = EDGE_CURVE('',#303450,#303481,#303483,.T.); +#303481 = VERTEX_POINT('',#303482); +#303482 = CARTESIAN_POINT('',(134.461994,-119.932628,-3.5E-02)); +#303483 = CIRCLE('',#303484,0.299999888633); +#303484 = AXIS2_PLACEMENT_3D('',#303485,#303486,#303487); +#303485 = CARTESIAN_POINT('',(134.7,-119.7499997515,-3.5E-02)); +#303486 = DIRECTION('',(0.,-0.,-1.)); +#303487 = DIRECTION('',(0.382683475394,0.923879514688,-0.)); +#303488 = ORIENTED_EDGE('',*,*,#303489,.F.); +#303489 = EDGE_CURVE('',#303490,#303481,#303492,.T.); +#303490 = VERTEX_POINT('',#303491); +#303491 = CARTESIAN_POINT('',(134.461994,-119.932628,0.)); +#303492 = LINE('',#303493,#303494); +#303493 = CARTESIAN_POINT('',(134.461994,-119.932628,0.)); +#303494 = VECTOR('',#303495,1.); +#303495 = DIRECTION('',(0.,0.,-1.)); +#303496 = ORIENTED_EDGE('',*,*,#303497,.F.); +#303497 = EDGE_CURVE('',#303458,#303490,#303498,.T.); +#303498 = CIRCLE('',#303499,0.299999888633); +#303499 = AXIS2_PLACEMENT_3D('',#303500,#303501,#303502); +#303500 = CARTESIAN_POINT('',(134.7,-119.7499997515,0.)); +#303501 = DIRECTION('',(0.,-0.,-1.)); +#303502 = DIRECTION('',(0.382683475394,0.923879514688,-0.)); +#303503 = CYLINDRICAL_SURFACE('',#303504,0.299999888633); +#303504 = AXIS2_PLACEMENT_3D('',#303505,#303506,#303507); +#303505 = CARTESIAN_POINT('',(134.7,-119.7499997515,0.)); +#303506 = DIRECTION('',(-0.,0.,1.)); +#303507 = DIRECTION('',(0.382683475394,0.923879514688,-0.)); +#303508 = ADVANCED_FACE('',(#303509),#303534,.F.); +#303509 = FACE_BOUND('',#303510,.F.); +#303510 = EDGE_LOOP('',(#303511,#303512,#303520,#303528)); +#303511 = ORIENTED_EDGE('',*,*,#303489,.T.); +#303512 = ORIENTED_EDGE('',*,*,#303513,.T.); +#303513 = EDGE_CURVE('',#303481,#303514,#303516,.T.); +#303514 = VERTEX_POINT('',#303515); +#303515 = CARTESIAN_POINT('',(134.443156,-119.9,-3.5E-02)); +#303516 = LINE('',#303517,#303518); +#303517 = CARTESIAN_POINT('',(134.461994,-119.932628,-3.5E-02)); +#303518 = VECTOR('',#303519,1.); +#303519 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#303520 = ORIENTED_EDGE('',*,*,#303521,.F.); +#303521 = EDGE_CURVE('',#303522,#303514,#303524,.T.); +#303522 = VERTEX_POINT('',#303523); +#303523 = CARTESIAN_POINT('',(134.443156,-119.9,0.)); +#303524 = LINE('',#303525,#303526); +#303525 = CARTESIAN_POINT('',(134.443156,-119.9,0.)); +#303526 = VECTOR('',#303527,1.); +#303527 = DIRECTION('',(0.,0.,-1.)); +#303528 = ORIENTED_EDGE('',*,*,#303529,.F.); +#303529 = EDGE_CURVE('',#303490,#303522,#303530,.T.); +#303530 = LINE('',#303531,#303532); +#303531 = CARTESIAN_POINT('',(134.461994,-119.932628,0.)); +#303532 = VECTOR('',#303533,1.); +#303533 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#303534 = PLANE('',#303535); +#303535 = AXIS2_PLACEMENT_3D('',#303536,#303537,#303538); +#303536 = CARTESIAN_POINT('',(134.461994,-119.932628,0.)); +#303537 = DIRECTION('',(0.866022927952,0.500004288243,0.)); +#303538 = DIRECTION('',(-0.500004288243,0.866022927952,0.)); +#303539 = ADVANCED_FACE('',(#303540),#303565,.F.); +#303540 = FACE_BOUND('',#303541,.F.); +#303541 = EDGE_LOOP('',(#303542,#303543,#303551,#303559)); +#303542 = ORIENTED_EDGE('',*,*,#303521,.T.); +#303543 = ORIENTED_EDGE('',*,*,#303544,.T.); +#303544 = EDGE_CURVE('',#303514,#303545,#303547,.T.); +#303545 = VERTEX_POINT('',#303546); +#303546 = CARTESIAN_POINT('',(134.030491,-119.898079,-3.5E-02)); +#303547 = LINE('',#303548,#303549); +#303548 = CARTESIAN_POINT('',(134.443156,-119.9,-3.5E-02)); +#303549 = VECTOR('',#303550,1.); +#303550 = DIRECTION('',(-0.999989165162,4.655057216598E-03,0.)); +#303551 = ORIENTED_EDGE('',*,*,#303552,.F.); +#303552 = EDGE_CURVE('',#303553,#303545,#303555,.T.); +#303553 = VERTEX_POINT('',#303554); +#303554 = CARTESIAN_POINT('',(134.030491,-119.898079,0.)); +#303555 = LINE('',#303556,#303557); +#303556 = CARTESIAN_POINT('',(134.030491,-119.898079,0.)); +#303557 = VECTOR('',#303558,1.); +#303558 = DIRECTION('',(0.,0.,-1.)); +#303559 = ORIENTED_EDGE('',*,*,#303560,.F.); +#303560 = EDGE_CURVE('',#303522,#303553,#303561,.T.); +#303561 = LINE('',#303562,#303563); +#303562 = CARTESIAN_POINT('',(134.443156,-119.9,0.)); +#303563 = VECTOR('',#303564,1.); +#303564 = DIRECTION('',(-0.999989165162,4.655057216598E-03,0.)); +#303565 = PLANE('',#303566); +#303566 = AXIS2_PLACEMENT_3D('',#303567,#303568,#303569); +#303567 = CARTESIAN_POINT('',(134.443156,-119.9,0.)); +#303568 = DIRECTION('',(4.655057216598E-03,0.999989165162,0.)); +#303569 = DIRECTION('',(-0.999989165162,4.655057216598E-03,0.)); +#303570 = ADVANCED_FACE('',(#303571),#303598,.T.); +#303571 = FACE_BOUND('',#303572,.F.); +#303572 = EDGE_LOOP('',(#303573,#303574,#303583,#303591)); +#303573 = ORIENTED_EDGE('',*,*,#303552,.T.); +#303574 = ORIENTED_EDGE('',*,*,#303575,.T.); +#303575 = EDGE_CURVE('',#303545,#303576,#303578,.T.); +#303576 = VERTEX_POINT('',#303577); +#303577 = CARTESIAN_POINT('',(134.030491,-119.701921,-3.5E-02)); +#303578 = CIRCLE('',#303579,0.100000456609); +#303579 = AXIS2_PLACEMENT_3D('',#303580,#303581,#303582); +#303580 = CARTESIAN_POINT('',(134.05,-119.8,-3.5E-02)); +#303581 = DIRECTION('',(0.,0.,-1.)); +#303582 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#303583 = ORIENTED_EDGE('',*,*,#303584,.F.); +#303584 = EDGE_CURVE('',#303585,#303576,#303587,.T.); +#303585 = VERTEX_POINT('',#303586); +#303586 = CARTESIAN_POINT('',(134.030491,-119.701921,0.)); +#303587 = LINE('',#303588,#303589); +#303588 = CARTESIAN_POINT('',(134.030491,-119.701921,0.)); +#303589 = VECTOR('',#303590,1.); +#303590 = DIRECTION('',(0.,0.,-1.)); +#303591 = ORIENTED_EDGE('',*,*,#303592,.F.); +#303592 = EDGE_CURVE('',#303553,#303585,#303593,.T.); +#303593 = CIRCLE('',#303594,0.100000456609); +#303594 = AXIS2_PLACEMENT_3D('',#303595,#303596,#303597); +#303595 = CARTESIAN_POINT('',(134.05,-119.8,0.)); +#303596 = DIRECTION('',(0.,0.,-1.)); +#303597 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#303598 = CYLINDRICAL_SURFACE('',#303599,0.100000456609); +#303599 = AXIS2_PLACEMENT_3D('',#303600,#303601,#303602); +#303600 = CARTESIAN_POINT('',(134.05,-119.8,0.)); +#303601 = DIRECTION('',(-0.,-0.,1.)); +#303602 = DIRECTION('',(-0.195089109205,-0.980785521646,-0.)); +#303603 = ADVANCED_FACE('',(#303604),#303629,.F.); +#303604 = FACE_BOUND('',#303605,.F.); +#303605 = EDGE_LOOP('',(#303606,#303607,#303615,#303623)); +#303606 = ORIENTED_EDGE('',*,*,#303584,.T.); +#303607 = ORIENTED_EDGE('',*,*,#303608,.T.); +#303608 = EDGE_CURVE('',#303576,#303609,#303611,.T.); +#303609 = VERTEX_POINT('',#303610); +#303610 = CARTESIAN_POINT('',(134.405472,-119.7,-3.5E-02)); +#303611 = LINE('',#303612,#303613); +#303612 = CARTESIAN_POINT('',(134.030491,-119.701921,-3.5E-02)); +#303613 = VECTOR('',#303614,1.); +#303614 = DIRECTION('',(0.999986878072,5.122859005581E-03,0.)); +#303615 = ORIENTED_EDGE('',*,*,#303616,.F.); +#303616 = EDGE_CURVE('',#303617,#303609,#303619,.T.); +#303617 = VERTEX_POINT('',#303618); +#303618 = CARTESIAN_POINT('',(134.405472,-119.7,0.)); +#303619 = LINE('',#303620,#303621); +#303620 = CARTESIAN_POINT('',(134.405472,-119.7,0.)); +#303621 = VECTOR('',#303622,1.); +#303622 = DIRECTION('',(0.,0.,-1.)); +#303623 = ORIENTED_EDGE('',*,*,#303624,.F.); +#303624 = EDGE_CURVE('',#303585,#303617,#303625,.T.); +#303625 = LINE('',#303626,#303627); +#303626 = CARTESIAN_POINT('',(134.030491,-119.701921,0.)); +#303627 = VECTOR('',#303628,1.); +#303628 = DIRECTION('',(0.999986878072,5.122859005581E-03,0.)); +#303629 = PLANE('',#303630); +#303630 = AXIS2_PLACEMENT_3D('',#303631,#303632,#303633); +#303631 = CARTESIAN_POINT('',(134.030491,-119.701921,0.)); +#303632 = DIRECTION('',(5.122859005581E-03,-0.999986878072,0.)); +#303633 = DIRECTION('',(0.999986878072,5.122859005581E-03,0.)); +#303634 = ADVANCED_FACE('',(#303635),#303660,.F.); +#303635 = FACE_BOUND('',#303636,.F.); +#303636 = EDGE_LOOP('',(#303637,#303638,#303646,#303654)); +#303637 = ORIENTED_EDGE('',*,*,#303616,.T.); +#303638 = ORIENTED_EDGE('',*,*,#303639,.T.); +#303639 = EDGE_CURVE('',#303609,#303640,#303642,.T.); +#303640 = VERTEX_POINT('',#303641); +#303641 = CARTESIAN_POINT('',(134.422836,-119.635195,-3.5E-02)); +#303642 = LINE('',#303643,#303644); +#303643 = CARTESIAN_POINT('',(134.405472,-119.7,-3.5E-02)); +#303644 = VECTOR('',#303645,1.); +#303645 = DIRECTION('',(0.258812823031,0.965927493467,0.)); +#303646 = ORIENTED_EDGE('',*,*,#303647,.F.); +#303647 = EDGE_CURVE('',#303648,#303640,#303650,.T.); +#303648 = VERTEX_POINT('',#303649); +#303649 = CARTESIAN_POINT('',(134.422836,-119.635195,0.)); +#303650 = LINE('',#303651,#303652); +#303651 = CARTESIAN_POINT('',(134.422836,-119.635195,0.)); +#303652 = VECTOR('',#303653,1.); +#303653 = DIRECTION('',(0.,0.,-1.)); +#303654 = ORIENTED_EDGE('',*,*,#303655,.F.); +#303655 = EDGE_CURVE('',#303617,#303648,#303656,.T.); +#303656 = LINE('',#303657,#303658); +#303657 = CARTESIAN_POINT('',(134.405472,-119.7,0.)); +#303658 = VECTOR('',#303659,1.); +#303659 = DIRECTION('',(0.258812823031,0.965927493467,0.)); +#303660 = PLANE('',#303661); +#303661 = AXIS2_PLACEMENT_3D('',#303662,#303663,#303664); +#303662 = CARTESIAN_POINT('',(134.405472,-119.7,0.)); +#303663 = DIRECTION('',(0.965927493467,-0.258812823031,0.)); +#303664 = DIRECTION('',(0.258812823031,0.965927493467,0.)); +#303665 = ADVANCED_FACE('',(#303666),#303691,.F.); +#303666 = FACE_BOUND('',#303667,.F.); +#303667 = EDGE_LOOP('',(#303668,#303669,#303677,#303685)); +#303668 = ORIENTED_EDGE('',*,*,#303647,.T.); +#303669 = ORIENTED_EDGE('',*,*,#303670,.T.); +#303670 = EDGE_CURVE('',#303640,#303671,#303673,.T.); +#303671 = VERTEX_POINT('',#303672); +#303672 = CARTESIAN_POINT('',(134.461994,-119.567372,-3.5E-02)); +#303673 = LINE('',#303674,#303675); +#303674 = CARTESIAN_POINT('',(134.422836,-119.635195,-3.5E-02)); +#303675 = VECTOR('',#303676,1.); +#303676 = DIRECTION('',(0.500003569146,0.866023343127,0.)); +#303677 = ORIENTED_EDGE('',*,*,#303678,.F.); +#303678 = EDGE_CURVE('',#303679,#303671,#303681,.T.); +#303679 = VERTEX_POINT('',#303680); +#303680 = CARTESIAN_POINT('',(134.461994,-119.567372,0.)); +#303681 = LINE('',#303682,#303683); +#303682 = CARTESIAN_POINT('',(134.461994,-119.567372,0.)); +#303683 = VECTOR('',#303684,1.); +#303684 = DIRECTION('',(0.,0.,-1.)); +#303685 = ORIENTED_EDGE('',*,*,#303686,.F.); +#303686 = EDGE_CURVE('',#303648,#303679,#303687,.T.); +#303687 = LINE('',#303688,#303689); +#303688 = CARTESIAN_POINT('',(134.422836,-119.635195,0.)); +#303689 = VECTOR('',#303690,1.); +#303690 = DIRECTION('',(0.500003569146,0.866023343127,0.)); +#303691 = PLANE('',#303692); +#303692 = AXIS2_PLACEMENT_3D('',#303693,#303694,#303695); +#303693 = CARTESIAN_POINT('',(134.422836,-119.635195,0.)); +#303694 = DIRECTION('',(0.866023343127,-0.500003569146,0.)); +#303695 = DIRECTION('',(0.500003569146,0.866023343127,0.)); +#303696 = ADVANCED_FACE('',(#303697),#303722,.F.); +#303697 = FACE_BOUND('',#303698,.F.); +#303698 = EDGE_LOOP('',(#303699,#303700,#303708,#303716)); +#303699 = ORIENTED_EDGE('',*,*,#303678,.T.); +#303700 = ORIENTED_EDGE('',*,*,#303701,.T.); +#303701 = EDGE_CURVE('',#303671,#303702,#303704,.T.); +#303702 = VERTEX_POINT('',#303703); +#303703 = CARTESIAN_POINT('',(134.517372,-119.511994,-3.5E-02)); +#303704 = LINE('',#303705,#303706); +#303705 = CARTESIAN_POINT('',(134.461994,-119.567372,-3.5E-02)); +#303706 = VECTOR('',#303707,1.); +#303707 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#303708 = ORIENTED_EDGE('',*,*,#303709,.F.); +#303709 = EDGE_CURVE('',#303710,#303702,#303712,.T.); +#303710 = VERTEX_POINT('',#303711); +#303711 = CARTESIAN_POINT('',(134.517372,-119.511994,0.)); +#303712 = LINE('',#303713,#303714); +#303713 = CARTESIAN_POINT('',(134.517372,-119.511994,0.)); +#303714 = VECTOR('',#303715,1.); +#303715 = DIRECTION('',(0.,0.,-1.)); +#303716 = ORIENTED_EDGE('',*,*,#303717,.F.); +#303717 = EDGE_CURVE('',#303679,#303710,#303718,.T.); +#303718 = LINE('',#303719,#303720); +#303719 = CARTESIAN_POINT('',(134.461994,-119.567372,0.)); +#303720 = VECTOR('',#303721,1.); +#303721 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#303722 = PLANE('',#303723); +#303723 = AXIS2_PLACEMENT_3D('',#303724,#303725,#303726); +#303724 = CARTESIAN_POINT('',(134.461994,-119.567372,0.)); +#303725 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#303726 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#303727 = ADVANCED_FACE('',(#303728),#303753,.F.); +#303728 = FACE_BOUND('',#303729,.F.); +#303729 = EDGE_LOOP('',(#303730,#303731,#303739,#303747)); +#303730 = ORIENTED_EDGE('',*,*,#303709,.T.); +#303731 = ORIENTED_EDGE('',*,*,#303732,.T.); +#303732 = EDGE_CURVE('',#303702,#303733,#303735,.T.); +#303733 = VERTEX_POINT('',#303734); +#303734 = CARTESIAN_POINT('',(134.538146,-119.5,-3.5E-02)); +#303735 = LINE('',#303736,#303737); +#303736 = CARTESIAN_POINT('',(134.517372,-119.511994,-3.5E-02)); +#303737 = VECTOR('',#303738,1.); +#303738 = DIRECTION('',(0.866023138188,0.500003924108,0.)); +#303739 = ORIENTED_EDGE('',*,*,#303740,.F.); +#303740 = EDGE_CURVE('',#303741,#303733,#303743,.T.); +#303741 = VERTEX_POINT('',#303742); +#303742 = CARTESIAN_POINT('',(134.538146,-119.5,0.)); +#303743 = LINE('',#303744,#303745); +#303744 = CARTESIAN_POINT('',(134.538146,-119.5,0.)); +#303745 = VECTOR('',#303746,1.); +#303746 = DIRECTION('',(0.,0.,-1.)); +#303747 = ORIENTED_EDGE('',*,*,#303748,.F.); +#303748 = EDGE_CURVE('',#303710,#303741,#303749,.T.); +#303749 = LINE('',#303750,#303751); +#303750 = CARTESIAN_POINT('',(134.517372,-119.511994,0.)); +#303751 = VECTOR('',#303752,1.); +#303752 = DIRECTION('',(0.866023138188,0.500003924108,0.)); +#303753 = PLANE('',#303754); +#303754 = AXIS2_PLACEMENT_3D('',#303755,#303756,#303757); +#303755 = CARTESIAN_POINT('',(134.517372,-119.511994,0.)); +#303756 = DIRECTION('',(0.500003924108,-0.866023138188,0.)); +#303757 = DIRECTION('',(0.866023138188,0.500003924108,0.)); +#303758 = ADVANCED_FACE('',(#303759),#303775,.F.); +#303759 = FACE_BOUND('',#303760,.F.); +#303760 = EDGE_LOOP('',(#303761,#303762,#303768,#303769)); +#303761 = ORIENTED_EDGE('',*,*,#303740,.T.); +#303762 = ORIENTED_EDGE('',*,*,#303763,.T.); +#303763 = EDGE_CURVE('',#303733,#303314,#303764,.T.); +#303764 = LINE('',#303765,#303766); +#303765 = CARTESIAN_POINT('',(134.538146,-119.5,-3.5E-02)); +#303766 = VECTOR('',#303767,1.); +#303767 = DIRECTION('',(-0.999992840499,3.78403885827E-03,0.)); +#303768 = ORIENTED_EDGE('',*,*,#303311,.F.); +#303769 = ORIENTED_EDGE('',*,*,#303770,.F.); +#303770 = EDGE_CURVE('',#303741,#303312,#303771,.T.); +#303771 = LINE('',#303772,#303773); +#303772 = CARTESIAN_POINT('',(134.538146,-119.5,0.)); +#303773 = VECTOR('',#303774,1.); +#303774 = DIRECTION('',(-0.999992840499,3.78403885827E-03,0.)); +#303775 = PLANE('',#303776); +#303776 = AXIS2_PLACEMENT_3D('',#303777,#303778,#303779); +#303777 = CARTESIAN_POINT('',(134.538146,-119.5,0.)); +#303778 = DIRECTION('',(3.78403885827E-03,0.999992840499,0.)); +#303779 = DIRECTION('',(-0.999992840499,3.78403885827E-03,0.)); +#303780 = ADVANCED_FACE('',(#303781),#303808,.F.); +#303781 = FACE_BOUND('',#303782,.F.); +#303782 = EDGE_LOOP('',(#303783,#303793,#303800,#303801)); +#303783 = ORIENTED_EDGE('',*,*,#303784,.T.); +#303784 = EDGE_CURVE('',#303785,#303787,#303789,.T.); +#303785 = VERTEX_POINT('',#303786); +#303786 = CARTESIAN_POINT('',(134.837255,-119.75,0.)); +#303787 = VERTEX_POINT('',#303788); +#303788 = CARTESIAN_POINT('',(134.837255,-119.75,-3.5E-02)); +#303789 = LINE('',#303790,#303791); +#303790 = CARTESIAN_POINT('',(134.837255,-119.75,0.)); +#303791 = VECTOR('',#303792,1.); +#303792 = DIRECTION('',(0.,0.,-1.)); +#303793 = ORIENTED_EDGE('',*,*,#303794,.T.); +#303794 = EDGE_CURVE('',#303787,#303787,#303795,.T.); +#303795 = CIRCLE('',#303796,0.137255); +#303796 = AXIS2_PLACEMENT_3D('',#303797,#303798,#303799); +#303797 = CARTESIAN_POINT('',(134.7,-119.75,-3.5E-02)); +#303798 = DIRECTION('',(0.,0.,1.)); +#303799 = DIRECTION('',(1.,0.,-0.)); +#303800 = ORIENTED_EDGE('',*,*,#303784,.F.); +#303801 = ORIENTED_EDGE('',*,*,#303802,.F.); +#303802 = EDGE_CURVE('',#303785,#303785,#303803,.T.); +#303803 = CIRCLE('',#303804,0.137255); +#303804 = AXIS2_PLACEMENT_3D('',#303805,#303806,#303807); +#303805 = CARTESIAN_POINT('',(134.7,-119.75,0.)); +#303806 = DIRECTION('',(0.,0.,1.)); +#303807 = DIRECTION('',(1.,0.,-0.)); +#303808 = CYLINDRICAL_SURFACE('',#303809,0.137255); +#303809 = AXIS2_PLACEMENT_3D('',#303810,#303811,#303812); +#303810 = CARTESIAN_POINT('',(134.7,-119.75,0.)); +#303811 = DIRECTION('',(0.,0.,1.)); +#303812 = DIRECTION('',(1.,0.,-0.)); +#303813 = ADVANCED_FACE('',(#303814,#303831),#303834,.F.); +#303814 = FACE_BOUND('',#303815,.F.); +#303815 = EDGE_LOOP('',(#303816,#303817,#303818,#303819,#303820,#303821, + #303822,#303823,#303824,#303825,#303826,#303827,#303828,#303829, + #303830)); +#303816 = ORIENTED_EDGE('',*,*,#303338,.T.); +#303817 = ORIENTED_EDGE('',*,*,#303370,.T.); +#303818 = ORIENTED_EDGE('',*,*,#303402,.T.); +#303819 = ORIENTED_EDGE('',*,*,#303434,.T.); +#303820 = ORIENTED_EDGE('',*,*,#303465,.T.); +#303821 = ORIENTED_EDGE('',*,*,#303497,.T.); +#303822 = ORIENTED_EDGE('',*,*,#303529,.T.); +#303823 = ORIENTED_EDGE('',*,*,#303560,.T.); +#303824 = ORIENTED_EDGE('',*,*,#303592,.T.); +#303825 = ORIENTED_EDGE('',*,*,#303624,.T.); +#303826 = ORIENTED_EDGE('',*,*,#303655,.T.); +#303827 = ORIENTED_EDGE('',*,*,#303686,.T.); +#303828 = ORIENTED_EDGE('',*,*,#303717,.T.); +#303829 = ORIENTED_EDGE('',*,*,#303748,.T.); +#303830 = ORIENTED_EDGE('',*,*,#303770,.T.); +#303831 = FACE_BOUND('',#303832,.F.); +#303832 = EDGE_LOOP('',(#303833)); +#303833 = ORIENTED_EDGE('',*,*,#303802,.T.); +#303834 = PLANE('',#303835); +#303835 = AXIS2_PLACEMENT_3D('',#303836,#303837,#303838); +#303836 = CARTESIAN_POINT('',(0.,0.,0.)); +#303837 = DIRECTION('',(-0.,-0.,-1.)); +#303838 = DIRECTION('',(-1.,0.,0.)); +#303839 = ADVANCED_FACE('',(#303840,#303857),#303860,.T.); +#303840 = FACE_BOUND('',#303841,.T.); +#303841 = EDGE_LOOP('',(#303842,#303843,#303844,#303845,#303846,#303847, + #303848,#303849,#303850,#303851,#303852,#303853,#303854,#303855, + #303856)); +#303842 = ORIENTED_EDGE('',*,*,#303321,.T.); +#303843 = ORIENTED_EDGE('',*,*,#303354,.T.); +#303844 = ORIENTED_EDGE('',*,*,#303385,.T.); +#303845 = ORIENTED_EDGE('',*,*,#303418,.T.); +#303846 = ORIENTED_EDGE('',*,*,#303449,.T.); +#303847 = ORIENTED_EDGE('',*,*,#303480,.T.); +#303848 = ORIENTED_EDGE('',*,*,#303513,.T.); +#303849 = ORIENTED_EDGE('',*,*,#303544,.T.); +#303850 = ORIENTED_EDGE('',*,*,#303575,.T.); +#303851 = ORIENTED_EDGE('',*,*,#303608,.T.); +#303852 = ORIENTED_EDGE('',*,*,#303639,.T.); +#303853 = ORIENTED_EDGE('',*,*,#303670,.T.); +#303854 = ORIENTED_EDGE('',*,*,#303701,.T.); +#303855 = ORIENTED_EDGE('',*,*,#303732,.T.); +#303856 = ORIENTED_EDGE('',*,*,#303763,.T.); +#303857 = FACE_BOUND('',#303858,.T.); +#303858 = EDGE_LOOP('',(#303859)); +#303859 = ORIENTED_EDGE('',*,*,#303794,.T.); +#303860 = PLANE('',#303861); +#303861 = AXIS2_PLACEMENT_3D('',#303862,#303863,#303864); +#303862 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#303863 = DIRECTION('',(-0.,-0.,-1.)); +#303864 = DIRECTION('',(-1.,0.,0.)); +#303865 = MANIFOLD_SOLID_BREP('',#303866); +#303866 = CLOSED_SHELL('',(#303867,#303907,#303940,#303971,#304002, + #304035,#304057,#304090,#304107)); +#303867 = ADVANCED_FACE('',(#303868),#303902,.F.); +#303868 = FACE_BOUND('',#303869,.F.); +#303869 = EDGE_LOOP('',(#303870,#303880,#303888,#303896)); +#303870 = ORIENTED_EDGE('',*,*,#303871,.T.); +#303871 = EDGE_CURVE('',#303872,#303874,#303876,.T.); +#303872 = VERTEX_POINT('',#303873); +#303873 = CARTESIAN_POINT('',(129.256844,-118.85,0.)); +#303874 = VERTEX_POINT('',#303875); +#303875 = CARTESIAN_POINT('',(129.256844,-118.85,-3.5E-02)); +#303876 = LINE('',#303877,#303878); +#303877 = CARTESIAN_POINT('',(129.256844,-118.85,0.)); +#303878 = VECTOR('',#303879,1.); +#303879 = DIRECTION('',(0.,0.,-1.)); +#303880 = ORIENTED_EDGE('',*,*,#303881,.T.); +#303881 = EDGE_CURVE('',#303874,#303882,#303884,.T.); +#303882 = VERTEX_POINT('',#303883); +#303883 = CARTESIAN_POINT('',(130.029264,-118.852882,-3.5E-02)); +#303884 = LINE('',#303885,#303886); +#303885 = CARTESIAN_POINT('',(129.256844,-118.85,-3.5E-02)); +#303886 = VECTOR('',#303887,1.); +#303887 = DIRECTION('',(0.999993039404,-3.731104761092E-03,0.)); +#303888 = ORIENTED_EDGE('',*,*,#303889,.F.); +#303889 = EDGE_CURVE('',#303890,#303882,#303892,.T.); +#303890 = VERTEX_POINT('',#303891); +#303891 = CARTESIAN_POINT('',(130.029264,-118.852882,0.)); +#303892 = LINE('',#303893,#303894); +#303893 = CARTESIAN_POINT('',(130.029264,-118.852882,0.)); +#303894 = VECTOR('',#303895,1.); +#303895 = DIRECTION('',(0.,0.,-1.)); +#303896 = ORIENTED_EDGE('',*,*,#303897,.F.); +#303897 = EDGE_CURVE('',#303872,#303890,#303898,.T.); +#303898 = LINE('',#303899,#303900); +#303899 = CARTESIAN_POINT('',(129.256844,-118.85,0.)); +#303900 = VECTOR('',#303901,1.); +#303901 = DIRECTION('',(0.999993039404,-3.731104761092E-03,0.)); +#303902 = PLANE('',#303903); +#303903 = AXIS2_PLACEMENT_3D('',#303904,#303905,#303906); +#303904 = CARTESIAN_POINT('',(129.256844,-118.85,0.)); +#303905 = DIRECTION('',(-3.731104761092E-03,-0.999993039404,-0.)); +#303906 = DIRECTION('',(0.999993039404,-3.731104761092E-03,0.)); +#303907 = ADVANCED_FACE('',(#303908),#303935,.T.); +#303908 = FACE_BOUND('',#303909,.F.); +#303909 = EDGE_LOOP('',(#303910,#303911,#303920,#303928)); +#303910 = ORIENTED_EDGE('',*,*,#303889,.T.); +#303911 = ORIENTED_EDGE('',*,*,#303912,.T.); +#303912 = EDGE_CURVE('',#303882,#303913,#303915,.T.); +#303913 = VERTEX_POINT('',#303914); +#303914 = CARTESIAN_POINT('',(130.029264,-119.147118,-3.5E-02)); +#303915 = CIRCLE('',#303916,0.150000292066); +#303916 = AXIS2_PLACEMENT_3D('',#303917,#303918,#303919); +#303917 = CARTESIAN_POINT('',(130.,-119.,-3.5E-02)); +#303918 = DIRECTION('',(0.,0.,-1.)); +#303919 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#303920 = ORIENTED_EDGE('',*,*,#303921,.F.); +#303921 = EDGE_CURVE('',#303922,#303913,#303924,.T.); +#303922 = VERTEX_POINT('',#303923); +#303923 = CARTESIAN_POINT('',(130.029264,-119.147118,0.)); +#303924 = LINE('',#303925,#303926); +#303925 = CARTESIAN_POINT('',(130.029264,-119.147118,0.)); +#303926 = VECTOR('',#303927,1.); +#303927 = DIRECTION('',(0.,0.,-1.)); +#303928 = ORIENTED_EDGE('',*,*,#303929,.F.); +#303929 = EDGE_CURVE('',#303890,#303922,#303930,.T.); +#303930 = CIRCLE('',#303931,0.150000292066); +#303931 = AXIS2_PLACEMENT_3D('',#303932,#303933,#303934); +#303932 = CARTESIAN_POINT('',(130.,-119.,0.)); +#303933 = DIRECTION('',(0.,0.,-1.)); +#303934 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#303935 = CYLINDRICAL_SURFACE('',#303936,0.150000292066); +#303936 = AXIS2_PLACEMENT_3D('',#303937,#303938,#303939); +#303937 = CARTESIAN_POINT('',(130.,-119.,0.)); +#303938 = DIRECTION('',(-0.,-0.,1.)); +#303939 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#303940 = ADVANCED_FACE('',(#303941),#303966,.F.); +#303941 = FACE_BOUND('',#303942,.F.); +#303942 = EDGE_LOOP('',(#303943,#303944,#303952,#303960)); +#303943 = ORIENTED_EDGE('',*,*,#303921,.T.); +#303944 = ORIENTED_EDGE('',*,*,#303945,.T.); +#303945 = EDGE_CURVE('',#303913,#303946,#303948,.T.); +#303946 = VERTEX_POINT('',#303947); +#303947 = CARTESIAN_POINT('',(129.256844,-119.15,-3.5E-02)); +#303948 = LINE('',#303949,#303950); +#303949 = CARTESIAN_POINT('',(130.029264,-119.147118,-3.5E-02)); +#303950 = VECTOR('',#303951,1.); +#303951 = DIRECTION('',(-0.999993039404,-3.731104761092E-03,0.)); +#303952 = ORIENTED_EDGE('',*,*,#303953,.F.); +#303953 = EDGE_CURVE('',#303954,#303946,#303956,.T.); +#303954 = VERTEX_POINT('',#303955); +#303955 = CARTESIAN_POINT('',(129.256844,-119.15,0.)); +#303956 = LINE('',#303957,#303958); +#303957 = CARTESIAN_POINT('',(129.256844,-119.15,0.)); +#303958 = VECTOR('',#303959,1.); +#303959 = DIRECTION('',(0.,0.,-1.)); +#303960 = ORIENTED_EDGE('',*,*,#303961,.F.); +#303961 = EDGE_CURVE('',#303922,#303954,#303962,.T.); +#303962 = LINE('',#303963,#303964); +#303963 = CARTESIAN_POINT('',(130.029264,-119.147118,0.)); +#303964 = VECTOR('',#303965,1.); +#303965 = DIRECTION('',(-0.999993039404,-3.731104761092E-03,0.)); +#303966 = PLANE('',#303967); +#303967 = AXIS2_PLACEMENT_3D('',#303968,#303969,#303970); +#303968 = CARTESIAN_POINT('',(130.029264,-119.147118,0.)); +#303969 = DIRECTION('',(-3.731104761092E-03,0.999993039404,0.)); +#303970 = DIRECTION('',(-0.999993039404,-3.731104761092E-03,0.)); +#303971 = ADVANCED_FACE('',(#303972),#303997,.F.); +#303972 = FACE_BOUND('',#303973,.F.); +#303973 = EDGE_LOOP('',(#303974,#303975,#303983,#303991)); +#303974 = ORIENTED_EDGE('',*,*,#303953,.T.); +#303975 = ORIENTED_EDGE('',*,*,#303976,.T.); +#303976 = EDGE_CURVE('',#303946,#303977,#303979,.T.); +#303977 = VERTEX_POINT('',#303978); +#303978 = CARTESIAN_POINT('',(129.238006,-119.182628,-3.5E-02)); +#303979 = LINE('',#303980,#303981); +#303980 = CARTESIAN_POINT('',(129.256844,-119.15,-3.5E-02)); +#303981 = VECTOR('',#303982,1.); +#303982 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#303983 = ORIENTED_EDGE('',*,*,#303984,.F.); +#303984 = EDGE_CURVE('',#303985,#303977,#303987,.T.); +#303985 = VERTEX_POINT('',#303986); +#303986 = CARTESIAN_POINT('',(129.238006,-119.182628,0.)); +#303987 = LINE('',#303988,#303989); +#303988 = CARTESIAN_POINT('',(129.238006,-119.182628,0.)); +#303989 = VECTOR('',#303990,1.); +#303990 = DIRECTION('',(0.,0.,-1.)); +#303991 = ORIENTED_EDGE('',*,*,#303992,.F.); +#303992 = EDGE_CURVE('',#303954,#303985,#303993,.T.); +#303993 = LINE('',#303994,#303995); +#303994 = CARTESIAN_POINT('',(129.256844,-119.15,0.)); +#303995 = VECTOR('',#303996,1.); +#303996 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#303997 = PLANE('',#303998); +#303998 = AXIS2_PLACEMENT_3D('',#303999,#304000,#304001); +#303999 = CARTESIAN_POINT('',(129.256844,-119.15,0.)); +#304000 = DIRECTION('',(-0.866022927953,0.500004288242,0.)); +#304001 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#304002 = ADVANCED_FACE('',(#304003),#304030,.T.); +#304003 = FACE_BOUND('',#304004,.F.); +#304004 = EDGE_LOOP('',(#304005,#304006,#304015,#304023)); +#304005 = ORIENTED_EDGE('',*,*,#303984,.T.); +#304006 = ORIENTED_EDGE('',*,*,#304007,.T.); +#304007 = EDGE_CURVE('',#303977,#304008,#304010,.T.); +#304008 = VERTEX_POINT('',#304009); +#304009 = CARTESIAN_POINT('',(129.238006,-118.817372,-3.5E-02)); +#304010 = CIRCLE('',#304011,0.299999737367); +#304011 = AXIS2_PLACEMENT_3D('',#304012,#304013,#304014); +#304012 = CARTESIAN_POINT('',(129.,-119.,-3.5E-02)); +#304013 = DIRECTION('',(0.,0.,-1.)); +#304014 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#304015 = ORIENTED_EDGE('',*,*,#304016,.F.); +#304016 = EDGE_CURVE('',#304017,#304008,#304019,.T.); +#304017 = VERTEX_POINT('',#304018); +#304018 = CARTESIAN_POINT('',(129.238006,-118.817372,0.)); +#304019 = LINE('',#304020,#304021); +#304020 = CARTESIAN_POINT('',(129.238006,-118.817372,0.)); +#304021 = VECTOR('',#304022,1.); +#304022 = DIRECTION('',(0.,0.,-1.)); +#304023 = ORIENTED_EDGE('',*,*,#304024,.F.); +#304024 = EDGE_CURVE('',#303985,#304017,#304025,.T.); +#304025 = CIRCLE('',#304026,0.299999737367); +#304026 = AXIS2_PLACEMENT_3D('',#304027,#304028,#304029); +#304027 = CARTESIAN_POINT('',(129.,-119.,0.)); +#304028 = DIRECTION('',(0.,0.,-1.)); +#304029 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#304030 = CYLINDRICAL_SURFACE('',#304031,0.299999737367); +#304031 = AXIS2_PLACEMENT_3D('',#304032,#304033,#304034); +#304032 = CARTESIAN_POINT('',(129.,-119.,0.)); +#304033 = DIRECTION('',(-0.,-0.,1.)); +#304034 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#304035 = ADVANCED_FACE('',(#304036),#304052,.F.); +#304036 = FACE_BOUND('',#304037,.F.); +#304037 = EDGE_LOOP('',(#304038,#304039,#304045,#304046)); +#304038 = ORIENTED_EDGE('',*,*,#304016,.T.); +#304039 = ORIENTED_EDGE('',*,*,#304040,.T.); +#304040 = EDGE_CURVE('',#304008,#303874,#304041,.T.); +#304041 = LINE('',#304042,#304043); +#304042 = CARTESIAN_POINT('',(129.238006,-118.817372,-3.5E-02)); +#304043 = VECTOR('',#304044,1.); +#304044 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#304045 = ORIENTED_EDGE('',*,*,#303871,.F.); +#304046 = ORIENTED_EDGE('',*,*,#304047,.F.); +#304047 = EDGE_CURVE('',#304017,#303872,#304048,.T.); +#304048 = LINE('',#304049,#304050); +#304049 = CARTESIAN_POINT('',(129.238006,-118.817372,0.)); +#304050 = VECTOR('',#304051,1.); +#304051 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#304052 = PLANE('',#304053); +#304053 = AXIS2_PLACEMENT_3D('',#304054,#304055,#304056); +#304054 = CARTESIAN_POINT('',(129.238006,-118.817372,0.)); +#304055 = DIRECTION('',(-0.866022927953,-0.500004288242,-0.)); +#304056 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#304057 = ADVANCED_FACE('',(#304058),#304085,.F.); +#304058 = FACE_BOUND('',#304059,.F.); +#304059 = EDGE_LOOP('',(#304060,#304070,#304077,#304078)); +#304060 = ORIENTED_EDGE('',*,*,#304061,.T.); +#304061 = EDGE_CURVE('',#304062,#304064,#304066,.T.); +#304062 = VERTEX_POINT('',#304063); +#304063 = CARTESIAN_POINT('',(129.137255,-119.,0.)); +#304064 = VERTEX_POINT('',#304065); +#304065 = CARTESIAN_POINT('',(129.137255,-119.,-3.5E-02)); +#304066 = LINE('',#304067,#304068); +#304067 = CARTESIAN_POINT('',(129.137255,-119.,0.)); +#304068 = VECTOR('',#304069,1.); +#304069 = DIRECTION('',(0.,0.,-1.)); +#304070 = ORIENTED_EDGE('',*,*,#304071,.T.); +#304071 = EDGE_CURVE('',#304064,#304064,#304072,.T.); +#304072 = CIRCLE('',#304073,0.137255); +#304073 = AXIS2_PLACEMENT_3D('',#304074,#304075,#304076); +#304074 = CARTESIAN_POINT('',(129.,-119.,-3.5E-02)); +#304075 = DIRECTION('',(0.,0.,1.)); +#304076 = DIRECTION('',(1.,0.,-0.)); +#304077 = ORIENTED_EDGE('',*,*,#304061,.F.); +#304078 = ORIENTED_EDGE('',*,*,#304079,.F.); +#304079 = EDGE_CURVE('',#304062,#304062,#304080,.T.); +#304080 = CIRCLE('',#304081,0.137255); +#304081 = AXIS2_PLACEMENT_3D('',#304082,#304083,#304084); +#304082 = CARTESIAN_POINT('',(129.,-119.,0.)); +#304083 = DIRECTION('',(0.,0.,1.)); +#304084 = DIRECTION('',(1.,0.,-0.)); +#304085 = CYLINDRICAL_SURFACE('',#304086,0.137255); +#304086 = AXIS2_PLACEMENT_3D('',#304087,#304088,#304089); +#304087 = CARTESIAN_POINT('',(129.,-119.,0.)); +#304088 = DIRECTION('',(0.,0.,1.)); +#304089 = DIRECTION('',(1.,0.,-0.)); +#304090 = ADVANCED_FACE('',(#304091,#304099),#304102,.F.); +#304091 = FACE_BOUND('',#304092,.F.); +#304092 = EDGE_LOOP('',(#304093,#304094,#304095,#304096,#304097,#304098) + ); +#304093 = ORIENTED_EDGE('',*,*,#303897,.T.); +#304094 = ORIENTED_EDGE('',*,*,#303929,.T.); +#304095 = ORIENTED_EDGE('',*,*,#303961,.T.); +#304096 = ORIENTED_EDGE('',*,*,#303992,.T.); +#304097 = ORIENTED_EDGE('',*,*,#304024,.T.); +#304098 = ORIENTED_EDGE('',*,*,#304047,.T.); +#304099 = FACE_BOUND('',#304100,.F.); +#304100 = EDGE_LOOP('',(#304101)); +#304101 = ORIENTED_EDGE('',*,*,#304079,.T.); +#304102 = PLANE('',#304103); +#304103 = AXIS2_PLACEMENT_3D('',#304104,#304105,#304106); +#304104 = CARTESIAN_POINT('',(0.,0.,0.)); +#304105 = DIRECTION('',(-0.,-0.,-1.)); +#304106 = DIRECTION('',(-1.,0.,0.)); +#304107 = ADVANCED_FACE('',(#304108,#304116),#304119,.T.); +#304108 = FACE_BOUND('',#304109,.T.); +#304109 = EDGE_LOOP('',(#304110,#304111,#304112,#304113,#304114,#304115) + ); +#304110 = ORIENTED_EDGE('',*,*,#303881,.T.); +#304111 = ORIENTED_EDGE('',*,*,#303912,.T.); +#304112 = ORIENTED_EDGE('',*,*,#303945,.T.); +#304113 = ORIENTED_EDGE('',*,*,#303976,.T.); +#304114 = ORIENTED_EDGE('',*,*,#304007,.T.); +#304115 = ORIENTED_EDGE('',*,*,#304040,.T.); +#304116 = FACE_BOUND('',#304117,.T.); +#304117 = EDGE_LOOP('',(#304118)); +#304118 = ORIENTED_EDGE('',*,*,#304071,.T.); +#304119 = PLANE('',#304120); +#304120 = AXIS2_PLACEMENT_3D('',#304121,#304122,#304123); +#304121 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#304122 = DIRECTION('',(-0.,-0.,-1.)); +#304123 = DIRECTION('',(-1.,0.,0.)); +#304124 = MANIFOLD_SOLID_BREP('',#304125); +#304125 = CLOSED_SHELL('',(#304126,#304168,#304199,#304230,#304261, + #304292,#304325,#304356,#304387,#304409,#304442,#304462)); +#304126 = ADVANCED_FACE('',(#304127),#304163,.T.); +#304127 = FACE_BOUND('',#304128,.F.); +#304128 = EDGE_LOOP('',(#304129,#304139,#304148,#304156)); +#304129 = ORIENTED_EDGE('',*,*,#304130,.T.); +#304130 = EDGE_CURVE('',#304131,#304133,#304135,.T.); +#304131 = VERTEX_POINT('',#304132); +#304132 = CARTESIAN_POINT('',(135.470736,-118.117118,0.)); +#304133 = VERTEX_POINT('',#304134); +#304134 = CARTESIAN_POINT('',(135.470736,-118.117118,-3.5E-02)); +#304135 = LINE('',#304136,#304137); +#304136 = CARTESIAN_POINT('',(135.470736,-118.117118,0.)); +#304137 = VECTOR('',#304138,1.); +#304138 = DIRECTION('',(0.,0.,-1.)); +#304139 = ORIENTED_EDGE('',*,*,#304140,.T.); +#304140 = EDGE_CURVE('',#304133,#304141,#304143,.T.); +#304141 = VERTEX_POINT('',#304142); +#304142 = CARTESIAN_POINT('',(135.470736,-117.822882,-3.5E-02)); +#304143 = CIRCLE('',#304144,0.150000292066); +#304144 = AXIS2_PLACEMENT_3D('',#304145,#304146,#304147); +#304145 = CARTESIAN_POINT('',(135.5,-117.97,-3.5E-02)); +#304146 = DIRECTION('',(0.,0.,-1.)); +#304147 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#304148 = ORIENTED_EDGE('',*,*,#304149,.F.); +#304149 = EDGE_CURVE('',#304150,#304141,#304152,.T.); +#304150 = VERTEX_POINT('',#304151); +#304151 = CARTESIAN_POINT('',(135.470736,-117.822882,0.)); +#304152 = LINE('',#304153,#304154); +#304153 = CARTESIAN_POINT('',(135.470736,-117.822882,0.)); +#304154 = VECTOR('',#304155,1.); +#304155 = DIRECTION('',(0.,0.,-1.)); +#304156 = ORIENTED_EDGE('',*,*,#304157,.F.); +#304157 = EDGE_CURVE('',#304131,#304150,#304158,.T.); +#304158 = CIRCLE('',#304159,0.150000292066); +#304159 = AXIS2_PLACEMENT_3D('',#304160,#304161,#304162); +#304160 = CARTESIAN_POINT('',(135.5,-117.97,0.)); +#304161 = DIRECTION('',(0.,0.,-1.)); +#304162 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#304163 = CYLINDRICAL_SURFACE('',#304164,0.150000292066); +#304164 = AXIS2_PLACEMENT_3D('',#304165,#304166,#304167); +#304165 = CARTESIAN_POINT('',(135.5,-117.97,0.)); +#304166 = DIRECTION('',(-0.,-0.,1.)); +#304167 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#304168 = ADVANCED_FACE('',(#304169),#304194,.F.); +#304169 = FACE_BOUND('',#304170,.F.); +#304170 = EDGE_LOOP('',(#304171,#304172,#304180,#304188)); +#304171 = ORIENTED_EDGE('',*,*,#304149,.T.); +#304172 = ORIENTED_EDGE('',*,*,#304173,.T.); +#304173 = EDGE_CURVE('',#304141,#304174,#304176,.T.); +#304174 = VERTEX_POINT('',#304175); +#304175 = CARTESIAN_POINT('',(135.999264,-117.822882,-3.5E-02)); +#304176 = LINE('',#304177,#304178); +#304177 = CARTESIAN_POINT('',(135.470736,-117.822882,-3.5E-02)); +#304178 = VECTOR('',#304179,1.); +#304179 = DIRECTION('',(1.,0.,0.)); +#304180 = ORIENTED_EDGE('',*,*,#304181,.F.); +#304181 = EDGE_CURVE('',#304182,#304174,#304184,.T.); +#304182 = VERTEX_POINT('',#304183); +#304183 = CARTESIAN_POINT('',(135.999264,-117.822882,0.)); +#304184 = LINE('',#304185,#304186); +#304185 = CARTESIAN_POINT('',(135.999264,-117.822882,0.)); +#304186 = VECTOR('',#304187,1.); +#304187 = DIRECTION('',(0.,0.,-1.)); +#304188 = ORIENTED_EDGE('',*,*,#304189,.F.); +#304189 = EDGE_CURVE('',#304150,#304182,#304190,.T.); +#304190 = LINE('',#304191,#304192); +#304191 = CARTESIAN_POINT('',(135.470736,-117.822882,0.)); +#304192 = VECTOR('',#304193,1.); +#304193 = DIRECTION('',(1.,0.,0.)); +#304194 = PLANE('',#304195); +#304195 = AXIS2_PLACEMENT_3D('',#304196,#304197,#304198); +#304196 = CARTESIAN_POINT('',(135.470736,-117.822882,0.)); +#304197 = DIRECTION('',(0.,-1.,0.)); +#304198 = DIRECTION('',(1.,0.,0.)); +#304199 = ADVANCED_FACE('',(#304200),#304225,.F.); +#304200 = FACE_BOUND('',#304201,.F.); +#304201 = EDGE_LOOP('',(#304202,#304203,#304211,#304219)); +#304202 = ORIENTED_EDGE('',*,*,#304181,.T.); +#304203 = ORIENTED_EDGE('',*,*,#304204,.T.); +#304204 = EDGE_CURVE('',#304174,#304205,#304207,.T.); +#304205 = VERTEX_POINT('',#304206); +#304206 = CARTESIAN_POINT('',(136.053335,-117.845279,-3.5E-02)); +#304207 = LINE('',#304208,#304209); +#304208 = CARTESIAN_POINT('',(135.999264,-117.822882,-3.5E-02)); +#304209 = VECTOR('',#304210,1.); +#304210 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#304211 = ORIENTED_EDGE('',*,*,#304212,.F.); +#304212 = EDGE_CURVE('',#304213,#304205,#304215,.T.); +#304213 = VERTEX_POINT('',#304214); +#304214 = CARTESIAN_POINT('',(136.053335,-117.845279,0.)); +#304215 = LINE('',#304216,#304217); +#304216 = CARTESIAN_POINT('',(136.053335,-117.845279,0.)); +#304217 = VECTOR('',#304218,1.); +#304218 = DIRECTION('',(0.,0.,-1.)); +#304219 = ORIENTED_EDGE('',*,*,#304220,.F.); +#304220 = EDGE_CURVE('',#304182,#304213,#304221,.T.); +#304221 = LINE('',#304222,#304223); +#304222 = CARTESIAN_POINT('',(135.999264,-117.822882,0.)); +#304223 = VECTOR('',#304224,1.); +#304224 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#304225 = PLANE('',#304226); +#304226 = AXIS2_PLACEMENT_3D('',#304227,#304228,#304229); +#304227 = CARTESIAN_POINT('',(135.999264,-117.822882,0.)); +#304228 = DIRECTION('',(-0.382684285085,-0.923879179303,-0.)); +#304229 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#304230 = ADVANCED_FACE('',(#304231),#304256,.F.); +#304231 = FACE_BOUND('',#304232,.F.); +#304232 = EDGE_LOOP('',(#304233,#304234,#304242,#304250)); +#304233 = ORIENTED_EDGE('',*,*,#304212,.T.); +#304234 = ORIENTED_EDGE('',*,*,#304235,.T.); +#304235 = EDGE_CURVE('',#304205,#304236,#304238,.T.); +#304236 = VERTEX_POINT('',#304237); +#304237 = CARTESIAN_POINT('',(136.924449,-118.712317,-3.5E-02)); +#304238 = LINE('',#304239,#304240); +#304239 = CARTESIAN_POINT('',(136.053335,-117.845279,-3.5E-02)); +#304240 = VECTOR('',#304241,1.); +#304241 = DIRECTION('',(0.708763011459,-0.705446662468,0.)); +#304242 = ORIENTED_EDGE('',*,*,#304243,.F.); +#304243 = EDGE_CURVE('',#304244,#304236,#304246,.T.); +#304244 = VERTEX_POINT('',#304245); +#304245 = CARTESIAN_POINT('',(136.924449,-118.712317,0.)); +#304246 = LINE('',#304247,#304248); +#304247 = CARTESIAN_POINT('',(136.924449,-118.712317,0.)); +#304248 = VECTOR('',#304249,1.); +#304249 = DIRECTION('',(0.,0.,-1.)); +#304250 = ORIENTED_EDGE('',*,*,#304251,.F.); +#304251 = EDGE_CURVE('',#304213,#304244,#304252,.T.); +#304252 = LINE('',#304253,#304254); +#304253 = CARTESIAN_POINT('',(136.053335,-117.845279,0.)); +#304254 = VECTOR('',#304255,1.); +#304255 = DIRECTION('',(0.708763011459,-0.705446662468,0.)); +#304256 = PLANE('',#304257); +#304257 = AXIS2_PLACEMENT_3D('',#304258,#304259,#304260); +#304258 = CARTESIAN_POINT('',(136.053335,-117.845279,0.)); +#304259 = DIRECTION('',(-0.705446662468,-0.708763011459,-0.)); +#304260 = DIRECTION('',(0.708763011459,-0.705446662468,0.)); +#304261 = ADVANCED_FACE('',(#304262),#304287,.F.); +#304262 = FACE_BOUND('',#304263,.F.); +#304263 = EDGE_LOOP('',(#304264,#304265,#304273,#304281)); +#304264 = ORIENTED_EDGE('',*,*,#304243,.T.); +#304265 = ORIENTED_EDGE('',*,*,#304266,.T.); +#304266 = EDGE_CURVE('',#304236,#304267,#304269,.T.); +#304267 = VERTEX_POINT('',#304268); +#304268 = CARTESIAN_POINT('',(136.960842,-118.702567,-3.5E-02)); +#304269 = LINE('',#304270,#304271); +#304270 = CARTESIAN_POINT('',(136.924449,-118.712317,-3.5E-02)); +#304271 = VECTOR('',#304272,1.); +#304272 = DIRECTION('',(0.965935612622,0.25878251925,0.)); +#304273 = ORIENTED_EDGE('',*,*,#304274,.F.); +#304274 = EDGE_CURVE('',#304275,#304267,#304277,.T.); +#304275 = VERTEX_POINT('',#304276); +#304276 = CARTESIAN_POINT('',(136.960842,-118.702567,0.)); +#304277 = LINE('',#304278,#304279); +#304278 = CARTESIAN_POINT('',(136.960842,-118.702567,0.)); +#304279 = VECTOR('',#304280,1.); +#304280 = DIRECTION('',(0.,0.,-1.)); +#304281 = ORIENTED_EDGE('',*,*,#304282,.F.); +#304282 = EDGE_CURVE('',#304244,#304275,#304283,.T.); +#304283 = LINE('',#304284,#304285); +#304284 = CARTESIAN_POINT('',(136.924449,-118.712317,0.)); +#304285 = VECTOR('',#304286,1.); +#304286 = DIRECTION('',(0.965935612622,0.25878251925,0.)); +#304287 = PLANE('',#304288); +#304288 = AXIS2_PLACEMENT_3D('',#304289,#304290,#304291); +#304289 = CARTESIAN_POINT('',(136.924449,-118.712317,0.)); +#304290 = DIRECTION('',(0.25878251925,-0.965935612622,0.)); +#304291 = DIRECTION('',(0.965935612622,0.25878251925,0.)); +#304292 = ADVANCED_FACE('',(#304293),#304320,.T.); +#304293 = FACE_BOUND('',#304294,.F.); +#304294 = EDGE_LOOP('',(#304295,#304296,#304305,#304313)); +#304295 = ORIENTED_EDGE('',*,*,#304274,.T.); +#304296 = ORIENTED_EDGE('',*,*,#304297,.T.); +#304297 = EDGE_CURVE('',#304267,#304298,#304300,.T.); +#304298 = VERTEX_POINT('',#304299); +#304299 = CARTESIAN_POINT('',(136.702567,-118.960842,-3.5E-02)); +#304300 = CIRCLE('',#304301,0.299999641111); +#304301 = AXIS2_PLACEMENT_3D('',#304302,#304303,#304304); +#304302 = CARTESIAN_POINT('',(137.00000006865,-119.0000000686,-3.5E-02) + ); +#304303 = DIRECTION('',(-0.,0.,-1.)); +#304304 = DIRECTION('',(-0.130527051649,0.991444748227,0.)); +#304305 = ORIENTED_EDGE('',*,*,#304306,.F.); +#304306 = EDGE_CURVE('',#304307,#304298,#304309,.T.); +#304307 = VERTEX_POINT('',#304308); +#304308 = CARTESIAN_POINT('',(136.702567,-118.960842,0.)); +#304309 = LINE('',#304310,#304311); +#304310 = CARTESIAN_POINT('',(136.702567,-118.960842,0.)); +#304311 = VECTOR('',#304312,1.); +#304312 = DIRECTION('',(0.,0.,-1.)); +#304313 = ORIENTED_EDGE('',*,*,#304314,.F.); +#304314 = EDGE_CURVE('',#304275,#304307,#304315,.T.); +#304315 = CIRCLE('',#304316,0.299999641111); +#304316 = AXIS2_PLACEMENT_3D('',#304317,#304318,#304319); +#304317 = CARTESIAN_POINT('',(137.00000006865,-119.0000000686,0.)); +#304318 = DIRECTION('',(-0.,0.,-1.)); +#304319 = DIRECTION('',(-0.130527051649,0.991444748227,0.)); +#304320 = CYLINDRICAL_SURFACE('',#304321,0.299999641111); +#304321 = AXIS2_PLACEMENT_3D('',#304322,#304323,#304324); +#304322 = CARTESIAN_POINT('',(137.00000006865,-119.0000000686,0.)); +#304323 = DIRECTION('',(0.,-0.,1.)); +#304324 = DIRECTION('',(-0.130527051649,0.991444748227,0.)); +#304325 = ADVANCED_FACE('',(#304326),#304351,.F.); +#304326 = FACE_BOUND('',#304327,.F.); +#304327 = EDGE_LOOP('',(#304328,#304329,#304337,#304345)); +#304328 = ORIENTED_EDGE('',*,*,#304306,.T.); +#304329 = ORIENTED_EDGE('',*,*,#304330,.T.); +#304330 = EDGE_CURVE('',#304298,#304331,#304333,.T.); +#304331 = VERTEX_POINT('',#304332); +#304332 = CARTESIAN_POINT('',(136.712317,-118.924449,-3.5E-02)); +#304333 = LINE('',#304334,#304335); +#304334 = CARTESIAN_POINT('',(136.702567,-118.960842,-3.5E-02)); +#304335 = VECTOR('',#304336,1.); +#304336 = DIRECTION('',(0.25878251925,0.965935612621,0.)); +#304337 = ORIENTED_EDGE('',*,*,#304338,.F.); +#304338 = EDGE_CURVE('',#304339,#304331,#304341,.T.); +#304339 = VERTEX_POINT('',#304340); +#304340 = CARTESIAN_POINT('',(136.712317,-118.924449,0.)); +#304341 = LINE('',#304342,#304343); +#304342 = CARTESIAN_POINT('',(136.712317,-118.924449,0.)); +#304343 = VECTOR('',#304344,1.); +#304344 = DIRECTION('',(0.,0.,-1.)); +#304345 = ORIENTED_EDGE('',*,*,#304346,.F.); +#304346 = EDGE_CURVE('',#304307,#304339,#304347,.T.); +#304347 = LINE('',#304348,#304349); +#304348 = CARTESIAN_POINT('',(136.702567,-118.960842,0.)); +#304349 = VECTOR('',#304350,1.); +#304350 = DIRECTION('',(0.25878251925,0.965935612621,0.)); +#304351 = PLANE('',#304352); +#304352 = AXIS2_PLACEMENT_3D('',#304353,#304354,#304355); +#304353 = CARTESIAN_POINT('',(136.702567,-118.960842,0.)); +#304354 = DIRECTION('',(0.965935612621,-0.25878251925,0.)); +#304355 = DIRECTION('',(0.25878251925,0.965935612621,0.)); +#304356 = ADVANCED_FACE('',(#304357),#304382,.F.); +#304357 = FACE_BOUND('',#304358,.F.); +#304358 = EDGE_LOOP('',(#304359,#304360,#304368,#304376)); +#304359 = ORIENTED_EDGE('',*,*,#304338,.T.); +#304360 = ORIENTED_EDGE('',*,*,#304361,.T.); +#304361 = EDGE_CURVE('',#304331,#304362,#304364,.T.); +#304362 = VERTEX_POINT('',#304363); +#304363 = CARTESIAN_POINT('',(135.907868,-118.12,-3.5E-02)); +#304364 = LINE('',#304365,#304366); +#304365 = CARTESIAN_POINT('',(136.712317,-118.924449,-3.5E-02)); +#304366 = VECTOR('',#304367,1.); +#304367 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#304368 = ORIENTED_EDGE('',*,*,#304369,.F.); +#304369 = EDGE_CURVE('',#304370,#304362,#304372,.T.); +#304370 = VERTEX_POINT('',#304371); +#304371 = CARTESIAN_POINT('',(135.907868,-118.12,0.)); +#304372 = LINE('',#304373,#304374); +#304373 = CARTESIAN_POINT('',(135.907868,-118.12,0.)); +#304374 = VECTOR('',#304375,1.); +#304375 = DIRECTION('',(0.,0.,-1.)); +#304376 = ORIENTED_EDGE('',*,*,#304377,.F.); +#304377 = EDGE_CURVE('',#304339,#304370,#304378,.T.); +#304378 = LINE('',#304379,#304380); +#304379 = CARTESIAN_POINT('',(136.712317,-118.924449,0.)); +#304380 = VECTOR('',#304381,1.); +#304381 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#304382 = PLANE('',#304383); +#304383 = AXIS2_PLACEMENT_3D('',#304384,#304385,#304386); +#304384 = CARTESIAN_POINT('',(136.712317,-118.924449,0.)); +#304385 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#304386 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#304387 = ADVANCED_FACE('',(#304388),#304404,.F.); +#304388 = FACE_BOUND('',#304389,.F.); +#304389 = EDGE_LOOP('',(#304390,#304391,#304397,#304398)); +#304390 = ORIENTED_EDGE('',*,*,#304369,.T.); +#304391 = ORIENTED_EDGE('',*,*,#304392,.T.); +#304392 = EDGE_CURVE('',#304362,#304133,#304393,.T.); +#304393 = LINE('',#304394,#304395); +#304394 = CARTESIAN_POINT('',(135.907868,-118.12,-3.5E-02)); +#304395 = VECTOR('',#304396,1.); +#304396 = DIRECTION('',(-0.999978267054,6.592830919835E-03,0.)); +#304397 = ORIENTED_EDGE('',*,*,#304130,.F.); +#304398 = ORIENTED_EDGE('',*,*,#304399,.F.); +#304399 = EDGE_CURVE('',#304370,#304131,#304400,.T.); +#304400 = LINE('',#304401,#304402); +#304401 = CARTESIAN_POINT('',(135.907868,-118.12,0.)); +#304402 = VECTOR('',#304403,1.); +#304403 = DIRECTION('',(-0.999978267054,6.592830919835E-03,0.)); +#304404 = PLANE('',#304405); +#304405 = AXIS2_PLACEMENT_3D('',#304406,#304407,#304408); +#304406 = CARTESIAN_POINT('',(135.907868,-118.12,0.)); +#304407 = DIRECTION('',(6.592830919835E-03,0.999978267054,0.)); +#304408 = DIRECTION('',(-0.999978267054,6.592830919835E-03,0.)); +#304409 = ADVANCED_FACE('',(#304410),#304437,.F.); +#304410 = FACE_BOUND('',#304411,.F.); +#304411 = EDGE_LOOP('',(#304412,#304422,#304429,#304430)); +#304412 = ORIENTED_EDGE('',*,*,#304413,.T.); +#304413 = EDGE_CURVE('',#304414,#304416,#304418,.T.); +#304414 = VERTEX_POINT('',#304415); +#304415 = CARTESIAN_POINT('',(137.137255,-119.,0.)); +#304416 = VERTEX_POINT('',#304417); +#304417 = CARTESIAN_POINT('',(137.137255,-119.,-3.5E-02)); +#304418 = LINE('',#304419,#304420); +#304419 = CARTESIAN_POINT('',(137.137255,-119.,0.)); +#304420 = VECTOR('',#304421,1.); +#304421 = DIRECTION('',(0.,0.,-1.)); +#304422 = ORIENTED_EDGE('',*,*,#304423,.T.); +#304423 = EDGE_CURVE('',#304416,#304416,#304424,.T.); +#304424 = CIRCLE('',#304425,0.137255); +#304425 = AXIS2_PLACEMENT_3D('',#304426,#304427,#304428); +#304426 = CARTESIAN_POINT('',(137.,-119.,-3.5E-02)); +#304427 = DIRECTION('',(0.,0.,1.)); +#304428 = DIRECTION('',(1.,0.,-0.)); +#304429 = ORIENTED_EDGE('',*,*,#304413,.F.); +#304430 = ORIENTED_EDGE('',*,*,#304431,.F.); +#304431 = EDGE_CURVE('',#304414,#304414,#304432,.T.); +#304432 = CIRCLE('',#304433,0.137255); +#304433 = AXIS2_PLACEMENT_3D('',#304434,#304435,#304436); +#304434 = CARTESIAN_POINT('',(137.,-119.,0.)); +#304435 = DIRECTION('',(0.,0.,1.)); +#304436 = DIRECTION('',(1.,0.,-0.)); +#304437 = CYLINDRICAL_SURFACE('',#304438,0.137255); +#304438 = AXIS2_PLACEMENT_3D('',#304439,#304440,#304441); +#304439 = CARTESIAN_POINT('',(137.,-119.,0.)); +#304440 = DIRECTION('',(0.,0.,1.)); +#304441 = DIRECTION('',(1.,0.,-0.)); +#304442 = ADVANCED_FACE('',(#304443,#304454),#304457,.F.); +#304443 = FACE_BOUND('',#304444,.F.); +#304444 = EDGE_LOOP('',(#304445,#304446,#304447,#304448,#304449,#304450, + #304451,#304452,#304453)); +#304445 = ORIENTED_EDGE('',*,*,#304157,.T.); +#304446 = ORIENTED_EDGE('',*,*,#304189,.T.); +#304447 = ORIENTED_EDGE('',*,*,#304220,.T.); +#304448 = ORIENTED_EDGE('',*,*,#304251,.T.); +#304449 = ORIENTED_EDGE('',*,*,#304282,.T.); +#304450 = ORIENTED_EDGE('',*,*,#304314,.T.); +#304451 = ORIENTED_EDGE('',*,*,#304346,.T.); +#304452 = ORIENTED_EDGE('',*,*,#304377,.T.); +#304453 = ORIENTED_EDGE('',*,*,#304399,.T.); +#304454 = FACE_BOUND('',#304455,.F.); +#304455 = EDGE_LOOP('',(#304456)); +#304456 = ORIENTED_EDGE('',*,*,#304431,.T.); +#304457 = PLANE('',#304458); +#304458 = AXIS2_PLACEMENT_3D('',#304459,#304460,#304461); +#304459 = CARTESIAN_POINT('',(0.,0.,0.)); +#304460 = DIRECTION('',(-0.,-0.,-1.)); +#304461 = DIRECTION('',(-1.,0.,0.)); +#304462 = ADVANCED_FACE('',(#304463,#304474),#304477,.T.); +#304463 = FACE_BOUND('',#304464,.T.); +#304464 = EDGE_LOOP('',(#304465,#304466,#304467,#304468,#304469,#304470, + #304471,#304472,#304473)); +#304465 = ORIENTED_EDGE('',*,*,#304140,.T.); +#304466 = ORIENTED_EDGE('',*,*,#304173,.T.); +#304467 = ORIENTED_EDGE('',*,*,#304204,.T.); +#304468 = ORIENTED_EDGE('',*,*,#304235,.T.); +#304469 = ORIENTED_EDGE('',*,*,#304266,.T.); +#304470 = ORIENTED_EDGE('',*,*,#304297,.T.); +#304471 = ORIENTED_EDGE('',*,*,#304330,.T.); +#304472 = ORIENTED_EDGE('',*,*,#304361,.T.); +#304473 = ORIENTED_EDGE('',*,*,#304392,.T.); +#304474 = FACE_BOUND('',#304475,.T.); +#304475 = EDGE_LOOP('',(#304476)); +#304476 = ORIENTED_EDGE('',*,*,#304423,.T.); +#304477 = PLANE('',#304478); +#304478 = AXIS2_PLACEMENT_3D('',#304479,#304480,#304481); +#304479 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#304480 = DIRECTION('',(-0.,-0.,-1.)); +#304481 = DIRECTION('',(-1.,0.,0.)); +#304482 = MANIFOLD_SOLID_BREP('',#304483); +#304483 = CLOSED_SHELL('',(#304484,#304526,#304557,#304588,#304619, + #304650,#304683,#304714,#304745,#304776,#304807,#304829,#304862, + #304884)); +#304484 = ADVANCED_FACE('',(#304485),#304521,.T.); +#304485 = FACE_BOUND('',#304486,.F.); +#304486 = EDGE_LOOP('',(#304487,#304497,#304506,#304514)); +#304487 = ORIENTED_EDGE('',*,*,#304488,.T.); +#304488 = EDGE_CURVE('',#304489,#304491,#304493,.T.); +#304489 = VERTEX_POINT('',#304490); +#304490 = CARTESIAN_POINT('',(139.816664,-116.87528,0.)); +#304491 = VERTEX_POINT('',#304492); +#304492 = CARTESIAN_POINT('',(139.816664,-116.87528,-3.5E-02)); +#304493 = LINE('',#304494,#304495); +#304494 = CARTESIAN_POINT('',(139.816664,-116.87528,0.)); +#304495 = VECTOR('',#304496,1.); +#304496 = DIRECTION('',(0.,0.,-1.)); +#304497 = ORIENTED_EDGE('',*,*,#304498,.T.); +#304498 = EDGE_CURVE('',#304491,#304499,#304501,.T.); +#304499 = VERTEX_POINT('',#304500); +#304500 = CARTESIAN_POINT('',(140.047118,-116.970736,-3.5E-02)); +#304501 = CIRCLE('',#304502,0.150000415027); +#304502 = AXIS2_PLACEMENT_3D('',#304503,#304504,#304505); +#304503 = CARTESIAN_POINT('',(139.9,-117.0000006302,-3.5E-02)); +#304504 = DIRECTION('',(0.,0.,-1.)); +#304505 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#304506 = ORIENTED_EDGE('',*,*,#304507,.F.); +#304507 = EDGE_CURVE('',#304508,#304499,#304510,.T.); +#304508 = VERTEX_POINT('',#304509); +#304509 = CARTESIAN_POINT('',(140.047118,-116.970736,0.)); +#304510 = LINE('',#304511,#304512); +#304511 = CARTESIAN_POINT('',(140.047118,-116.970736,0.)); +#304512 = VECTOR('',#304513,1.); +#304513 = DIRECTION('',(0.,0.,-1.)); +#304514 = ORIENTED_EDGE('',*,*,#304515,.F.); +#304515 = EDGE_CURVE('',#304489,#304508,#304516,.T.); +#304516 = CIRCLE('',#304517,0.150000415027); +#304517 = AXIS2_PLACEMENT_3D('',#304518,#304519,#304520); +#304518 = CARTESIAN_POINT('',(139.9,-117.0000006302,0.)); +#304519 = DIRECTION('',(0.,0.,-1.)); +#304520 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#304521 = CYLINDRICAL_SURFACE('',#304522,0.150000415027); +#304522 = AXIS2_PLACEMENT_3D('',#304523,#304524,#304525); +#304523 = CARTESIAN_POINT('',(139.9,-117.0000006302,0.)); +#304524 = DIRECTION('',(-0.,-0.,1.)); +#304525 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#304526 = ADVANCED_FACE('',(#304527),#304552,.F.); +#304527 = FACE_BOUND('',#304528,.F.); +#304528 = EDGE_LOOP('',(#304529,#304530,#304538,#304546)); +#304529 = ORIENTED_EDGE('',*,*,#304507,.T.); +#304530 = ORIENTED_EDGE('',*,*,#304531,.T.); +#304531 = EDGE_CURVE('',#304499,#304532,#304534,.T.); +#304532 = VERTEX_POINT('',#304533); +#304533 = CARTESIAN_POINT('',(140.047118,-118.129264,-3.5E-02)); +#304534 = LINE('',#304535,#304536); +#304535 = CARTESIAN_POINT('',(140.047118,-116.970736,-3.5E-02)); +#304536 = VECTOR('',#304537,1.); +#304537 = DIRECTION('',(0.,-1.,0.)); +#304538 = ORIENTED_EDGE('',*,*,#304539,.F.); +#304539 = EDGE_CURVE('',#304540,#304532,#304542,.T.); +#304540 = VERTEX_POINT('',#304541); +#304541 = CARTESIAN_POINT('',(140.047118,-118.129264,0.)); +#304542 = LINE('',#304543,#304544); +#304543 = CARTESIAN_POINT('',(140.047118,-118.129264,0.)); +#304544 = VECTOR('',#304545,1.); +#304545 = DIRECTION('',(0.,0.,-1.)); +#304546 = ORIENTED_EDGE('',*,*,#304547,.F.); +#304547 = EDGE_CURVE('',#304508,#304540,#304548,.T.); +#304548 = LINE('',#304549,#304550); +#304549 = CARTESIAN_POINT('',(140.047118,-116.970736,0.)); +#304550 = VECTOR('',#304551,1.); +#304551 = DIRECTION('',(0.,-1.,0.)); +#304552 = PLANE('',#304553); +#304553 = AXIS2_PLACEMENT_3D('',#304554,#304555,#304556); +#304554 = CARTESIAN_POINT('',(140.047118,-116.970736,0.)); +#304555 = DIRECTION('',(-1.,-0.,-0.)); +#304556 = DIRECTION('',(0.,-1.,0.)); +#304557 = ADVANCED_FACE('',(#304558),#304583,.F.); +#304558 = FACE_BOUND('',#304559,.F.); +#304559 = EDGE_LOOP('',(#304560,#304561,#304569,#304577)); +#304560 = ORIENTED_EDGE('',*,*,#304539,.T.); +#304561 = ORIENTED_EDGE('',*,*,#304562,.T.); +#304562 = EDGE_CURVE('',#304532,#304563,#304565,.T.); +#304563 = VERTEX_POINT('',#304564); +#304564 = CARTESIAN_POINT('',(140.024721,-118.183336,-3.5E-02)); +#304565 = LINE('',#304566,#304567); +#304566 = CARTESIAN_POINT('',(140.047118,-118.129264,-3.5E-02)); +#304567 = VECTOR('',#304568,1.); +#304568 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#304569 = ORIENTED_EDGE('',*,*,#304570,.F.); +#304570 = EDGE_CURVE('',#304571,#304563,#304573,.T.); +#304571 = VERTEX_POINT('',#304572); +#304572 = CARTESIAN_POINT('',(140.024721,-118.183336,0.)); +#304573 = LINE('',#304574,#304575); +#304574 = CARTESIAN_POINT('',(140.024721,-118.183336,0.)); +#304575 = VECTOR('',#304576,1.); +#304576 = DIRECTION('',(0.,0.,-1.)); +#304577 = ORIENTED_EDGE('',*,*,#304578,.F.); +#304578 = EDGE_CURVE('',#304540,#304571,#304579,.T.); +#304579 = LINE('',#304580,#304581); +#304580 = CARTESIAN_POINT('',(140.047118,-118.129264,0.)); +#304581 = VECTOR('',#304582,1.); +#304582 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#304583 = PLANE('',#304584); +#304584 = AXIS2_PLACEMENT_3D('',#304585,#304586,#304587); +#304585 = CARTESIAN_POINT('',(140.047118,-118.129264,0.)); +#304586 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#304587 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#304588 = ADVANCED_FACE('',(#304589),#304614,.F.); +#304589 = FACE_BOUND('',#304590,.F.); +#304590 = EDGE_LOOP('',(#304591,#304592,#304600,#304608)); +#304591 = ORIENTED_EDGE('',*,*,#304570,.T.); +#304592 = ORIENTED_EDGE('',*,*,#304593,.T.); +#304593 = EDGE_CURVE('',#304563,#304594,#304596,.T.); +#304594 = VERTEX_POINT('',#304595); +#304595 = CARTESIAN_POINT('',(139.787682,-118.424449,-3.5E-02)); +#304596 = LINE('',#304597,#304598); +#304597 = CARTESIAN_POINT('',(140.024721,-118.183336,-3.5E-02)); +#304598 = VECTOR('',#304599,1.); +#304599 = DIRECTION('',(-0.701056570702,-0.713105661649,0.)); +#304600 = ORIENTED_EDGE('',*,*,#304601,.F.); +#304601 = EDGE_CURVE('',#304602,#304594,#304604,.T.); +#304602 = VERTEX_POINT('',#304603); +#304603 = CARTESIAN_POINT('',(139.787682,-118.424449,0.)); +#304604 = LINE('',#304605,#304606); +#304605 = CARTESIAN_POINT('',(139.787682,-118.424449,0.)); +#304606 = VECTOR('',#304607,1.); +#304607 = DIRECTION('',(0.,0.,-1.)); +#304608 = ORIENTED_EDGE('',*,*,#304609,.F.); +#304609 = EDGE_CURVE('',#304571,#304602,#304610,.T.); +#304610 = LINE('',#304611,#304612); +#304611 = CARTESIAN_POINT('',(140.024721,-118.183336,0.)); +#304612 = VECTOR('',#304613,1.); +#304613 = DIRECTION('',(-0.701056570702,-0.713105661649,0.)); +#304614 = PLANE('',#304615); +#304615 = AXIS2_PLACEMENT_3D('',#304616,#304617,#304618); +#304616 = CARTESIAN_POINT('',(140.024721,-118.183336,0.)); +#304617 = DIRECTION('',(-0.713105661649,0.701056570702,0.)); +#304618 = DIRECTION('',(-0.701056570702,-0.713105661649,0.)); +#304619 = ADVANCED_FACE('',(#304620),#304645,.F.); +#304620 = FACE_BOUND('',#304621,.F.); +#304621 = EDGE_LOOP('',(#304622,#304623,#304631,#304639)); +#304622 = ORIENTED_EDGE('',*,*,#304601,.T.); +#304623 = ORIENTED_EDGE('',*,*,#304624,.T.); +#304624 = EDGE_CURVE('',#304594,#304625,#304627,.T.); +#304625 = VERTEX_POINT('',#304626); +#304626 = CARTESIAN_POINT('',(139.797433,-118.460842,-3.5E-02)); +#304627 = LINE('',#304628,#304629); +#304628 = CARTESIAN_POINT('',(139.787682,-118.424449,-3.5E-02)); +#304629 = VECTOR('',#304630,1.); +#304630 = DIRECTION('',(0.258807283331,-0.96592897777,0.)); +#304631 = ORIENTED_EDGE('',*,*,#304632,.F.); +#304632 = EDGE_CURVE('',#304633,#304625,#304635,.T.); +#304633 = VERTEX_POINT('',#304634); +#304634 = CARTESIAN_POINT('',(139.797433,-118.460842,0.)); +#304635 = LINE('',#304636,#304637); +#304636 = CARTESIAN_POINT('',(139.797433,-118.460842,0.)); +#304637 = VECTOR('',#304638,1.); +#304638 = DIRECTION('',(0.,0.,-1.)); +#304639 = ORIENTED_EDGE('',*,*,#304640,.F.); +#304640 = EDGE_CURVE('',#304602,#304633,#304641,.T.); +#304641 = LINE('',#304642,#304643); +#304642 = CARTESIAN_POINT('',(139.787682,-118.424449,0.)); +#304643 = VECTOR('',#304644,1.); +#304644 = DIRECTION('',(0.258807283331,-0.96592897777,0.)); +#304645 = PLANE('',#304646); +#304646 = AXIS2_PLACEMENT_3D('',#304647,#304648,#304649); +#304647 = CARTESIAN_POINT('',(139.787682,-118.424449,0.)); +#304648 = DIRECTION('',(-0.96592897777,-0.258807283331,-0.)); +#304649 = DIRECTION('',(0.258807283331,-0.96592897777,0.)); +#304650 = ADVANCED_FACE('',(#304651),#304678,.T.); +#304651 = FACE_BOUND('',#304652,.F.); +#304652 = EDGE_LOOP('',(#304653,#304654,#304663,#304671)); +#304653 = ORIENTED_EDGE('',*,*,#304632,.T.); +#304654 = ORIENTED_EDGE('',*,*,#304655,.T.); +#304655 = EDGE_CURVE('',#304625,#304656,#304658,.T.); +#304656 = VERTEX_POINT('',#304657); +#304657 = CARTESIAN_POINT('',(139.539158,-118.202567,-3.5E-02)); +#304658 = CIRCLE('',#304659,0.299999641111); +#304659 = AXIS2_PLACEMENT_3D('',#304660,#304661,#304662); +#304660 = CARTESIAN_POINT('',(139.49999993135,-118.5000000686,-3.5E-02) + ); +#304661 = DIRECTION('',(0.,0.,-1.)); +#304662 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#304663 = ORIENTED_EDGE('',*,*,#304664,.F.); +#304664 = EDGE_CURVE('',#304665,#304656,#304667,.T.); +#304665 = VERTEX_POINT('',#304666); +#304666 = CARTESIAN_POINT('',(139.539158,-118.202567,0.)); +#304667 = LINE('',#304668,#304669); +#304668 = CARTESIAN_POINT('',(139.539158,-118.202567,0.)); +#304669 = VECTOR('',#304670,1.); +#304670 = DIRECTION('',(0.,0.,-1.)); +#304671 = ORIENTED_EDGE('',*,*,#304672,.F.); +#304672 = EDGE_CURVE('',#304633,#304665,#304673,.T.); +#304673 = CIRCLE('',#304674,0.299999641111); +#304674 = AXIS2_PLACEMENT_3D('',#304675,#304676,#304677); +#304675 = CARTESIAN_POINT('',(139.49999993135,-118.5000000686,0.)); +#304676 = DIRECTION('',(0.,0.,-1.)); +#304677 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#304678 = CYLINDRICAL_SURFACE('',#304679,0.299999641111); +#304679 = AXIS2_PLACEMENT_3D('',#304680,#304681,#304682); +#304680 = CARTESIAN_POINT('',(139.49999993135,-118.5000000686,0.)); +#304681 = DIRECTION('',(-0.,-0.,1.)); +#304682 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#304683 = ADVANCED_FACE('',(#304684),#304709,.F.); +#304684 = FACE_BOUND('',#304685,.F.); +#304685 = EDGE_LOOP('',(#304686,#304687,#304695,#304703)); +#304686 = ORIENTED_EDGE('',*,*,#304664,.T.); +#304687 = ORIENTED_EDGE('',*,*,#304688,.T.); +#304688 = EDGE_CURVE('',#304656,#304689,#304691,.T.); +#304689 = VERTEX_POINT('',#304690); +#304690 = CARTESIAN_POINT('',(139.57555,-118.212317,-3.5E-02)); +#304691 = LINE('',#304692,#304693); +#304692 = CARTESIAN_POINT('',(139.539158,-118.202567,-3.5E-02)); +#304693 = VECTOR('',#304694,1.); +#304694 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#304695 = ORIENTED_EDGE('',*,*,#304696,.F.); +#304696 = EDGE_CURVE('',#304697,#304689,#304699,.T.); +#304697 = VERTEX_POINT('',#304698); +#304698 = CARTESIAN_POINT('',(139.57555,-118.212317,0.)); +#304699 = LINE('',#304700,#304701); +#304700 = CARTESIAN_POINT('',(139.57555,-118.212317,0.)); +#304701 = VECTOR('',#304702,1.); +#304702 = DIRECTION('',(0.,0.,-1.)); +#304703 = ORIENTED_EDGE('',*,*,#304704,.F.); +#304704 = EDGE_CURVE('',#304665,#304697,#304705,.T.); +#304705 = LINE('',#304706,#304707); +#304706 = CARTESIAN_POINT('',(139.539158,-118.202567,0.)); +#304707 = VECTOR('',#304708,1.); +#304708 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#304709 = PLANE('',#304710); +#304710 = AXIS2_PLACEMENT_3D('',#304711,#304712,#304713); +#304711 = CARTESIAN_POINT('',(139.539158,-118.202567,0.)); +#304712 = DIRECTION('',(-0.258789153994,-0.965933835092,-0.)); +#304713 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#304714 = ADVANCED_FACE('',(#304715),#304740,.F.); +#304715 = FACE_BOUND('',#304716,.F.); +#304716 = EDGE_LOOP('',(#304717,#304718,#304726,#304734)); +#304717 = ORIENTED_EDGE('',*,*,#304696,.T.); +#304718 = ORIENTED_EDGE('',*,*,#304719,.T.); +#304719 = EDGE_CURVE('',#304689,#304720,#304722,.T.); +#304720 = VERTEX_POINT('',#304721); +#304721 = CARTESIAN_POINT('',(139.75,-118.037868,-3.5E-02)); +#304722 = LINE('',#304723,#304724); +#304723 = CARTESIAN_POINT('',(139.57555,-118.212317,-3.5E-02)); +#304724 = VECTOR('',#304725,1.); +#304725 = DIRECTION('',(0.707108807864,0.707104754503,0.)); +#304726 = ORIENTED_EDGE('',*,*,#304727,.F.); +#304727 = EDGE_CURVE('',#304728,#304720,#304730,.T.); +#304728 = VERTEX_POINT('',#304729); +#304729 = CARTESIAN_POINT('',(139.75,-118.037868,0.)); +#304730 = LINE('',#304731,#304732); +#304731 = CARTESIAN_POINT('',(139.75,-118.037868,0.)); +#304732 = VECTOR('',#304733,1.); +#304733 = DIRECTION('',(0.,0.,-1.)); +#304734 = ORIENTED_EDGE('',*,*,#304735,.F.); +#304735 = EDGE_CURVE('',#304697,#304728,#304736,.T.); +#304736 = LINE('',#304737,#304738); +#304737 = CARTESIAN_POINT('',(139.57555,-118.212317,0.)); +#304738 = VECTOR('',#304739,1.); +#304739 = DIRECTION('',(0.707108807864,0.707104754503,0.)); +#304740 = PLANE('',#304741); +#304741 = AXIS2_PLACEMENT_3D('',#304742,#304743,#304744); +#304742 = CARTESIAN_POINT('',(139.57555,-118.212317,0.)); +#304743 = DIRECTION('',(0.707104754503,-0.707108807864,0.)); +#304744 = DIRECTION('',(0.707108807864,0.707104754503,0.)); +#304745 = ADVANCED_FACE('',(#304746),#304771,.F.); +#304746 = FACE_BOUND('',#304747,.F.); +#304747 = EDGE_LOOP('',(#304748,#304749,#304757,#304765)); +#304748 = ORIENTED_EDGE('',*,*,#304727,.T.); +#304749 = ORIENTED_EDGE('',*,*,#304750,.T.); +#304750 = EDGE_CURVE('',#304720,#304751,#304753,.T.); +#304751 = VERTEX_POINT('',#304752); +#304752 = CARTESIAN_POINT('',(139.752882,-116.970736,-3.5E-02)); +#304753 = LINE('',#304754,#304755); +#304754 = CARTESIAN_POINT('',(139.75,-118.037868,-3.5E-02)); +#304755 = VECTOR('',#304756,1.); +#304756 = DIRECTION('',(2.700686971944E-03,0.999996353138,0.)); +#304757 = ORIENTED_EDGE('',*,*,#304758,.F.); +#304758 = EDGE_CURVE('',#304759,#304751,#304761,.T.); +#304759 = VERTEX_POINT('',#304760); +#304760 = CARTESIAN_POINT('',(139.752882,-116.970736,0.)); +#304761 = LINE('',#304762,#304763); +#304762 = CARTESIAN_POINT('',(139.752882,-116.970736,0.)); +#304763 = VECTOR('',#304764,1.); +#304764 = DIRECTION('',(0.,0.,-1.)); +#304765 = ORIENTED_EDGE('',*,*,#304766,.F.); +#304766 = EDGE_CURVE('',#304728,#304759,#304767,.T.); +#304767 = LINE('',#304768,#304769); +#304768 = CARTESIAN_POINT('',(139.75,-118.037868,0.)); +#304769 = VECTOR('',#304770,1.); +#304770 = DIRECTION('',(2.700686971944E-03,0.999996353138,0.)); +#304771 = PLANE('',#304772); +#304772 = AXIS2_PLACEMENT_3D('',#304773,#304774,#304775); +#304773 = CARTESIAN_POINT('',(139.75,-118.037868,0.)); +#304774 = DIRECTION('',(0.999996353138,-2.700686971944E-03,0.)); +#304775 = DIRECTION('',(2.700686971944E-03,0.999996353138,0.)); +#304776 = ADVANCED_FACE('',(#304777),#304802,.F.); +#304777 = FACE_BOUND('',#304778,.F.); +#304778 = EDGE_LOOP('',(#304779,#304780,#304788,#304796)); +#304779 = ORIENTED_EDGE('',*,*,#304758,.T.); +#304780 = ORIENTED_EDGE('',*,*,#304781,.T.); +#304781 = EDGE_CURVE('',#304751,#304782,#304784,.T.); +#304782 = VERTEX_POINT('',#304783); +#304783 = CARTESIAN_POINT('',(139.77528,-116.916664,-3.5E-02)); +#304784 = LINE('',#304785,#304786); +#304785 = CARTESIAN_POINT('',(139.752882,-116.970736,-3.5E-02)); +#304786 = VECTOR('',#304787,1.); +#304787 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#304788 = ORIENTED_EDGE('',*,*,#304789,.F.); +#304789 = EDGE_CURVE('',#304790,#304782,#304792,.T.); +#304790 = VERTEX_POINT('',#304791); +#304791 = CARTESIAN_POINT('',(139.77528,-116.916664,0.)); +#304792 = LINE('',#304793,#304794); +#304793 = CARTESIAN_POINT('',(139.77528,-116.916664,0.)); +#304794 = VECTOR('',#304795,1.); +#304795 = DIRECTION('',(0.,0.,-1.)); +#304796 = ORIENTED_EDGE('',*,*,#304797,.F.); +#304797 = EDGE_CURVE('',#304759,#304790,#304798,.T.); +#304798 = LINE('',#304799,#304800); +#304799 = CARTESIAN_POINT('',(139.752882,-116.970736,0.)); +#304800 = VECTOR('',#304801,1.); +#304801 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#304802 = PLANE('',#304803); +#304803 = AXIS2_PLACEMENT_3D('',#304804,#304805,#304806); +#304804 = CARTESIAN_POINT('',(139.752882,-116.970736,0.)); +#304805 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#304806 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#304807 = ADVANCED_FACE('',(#304808),#304824,.F.); +#304808 = FACE_BOUND('',#304809,.F.); +#304809 = EDGE_LOOP('',(#304810,#304811,#304817,#304818)); +#304810 = ORIENTED_EDGE('',*,*,#304789,.T.); +#304811 = ORIENTED_EDGE('',*,*,#304812,.T.); +#304812 = EDGE_CURVE('',#304782,#304491,#304813,.T.); +#304813 = LINE('',#304814,#304815); +#304814 = CARTESIAN_POINT('',(139.77528,-116.916664,-3.5E-02)); +#304815 = VECTOR('',#304816,1.); +#304816 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#304817 = ORIENTED_EDGE('',*,*,#304488,.F.); +#304818 = ORIENTED_EDGE('',*,*,#304819,.F.); +#304819 = EDGE_CURVE('',#304790,#304489,#304820,.T.); +#304820 = LINE('',#304821,#304822); +#304821 = CARTESIAN_POINT('',(139.77528,-116.916664,0.)); +#304822 = VECTOR('',#304823,1.); +#304823 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#304824 = PLANE('',#304825); +#304825 = AXIS2_PLACEMENT_3D('',#304826,#304827,#304828); +#304826 = CARTESIAN_POINT('',(139.77528,-116.916664,0.)); +#304827 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#304828 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#304829 = ADVANCED_FACE('',(#304830),#304857,.F.); +#304830 = FACE_BOUND('',#304831,.F.); +#304831 = EDGE_LOOP('',(#304832,#304842,#304849,#304850)); +#304832 = ORIENTED_EDGE('',*,*,#304833,.T.); +#304833 = EDGE_CURVE('',#304834,#304836,#304838,.T.); +#304834 = VERTEX_POINT('',#304835); +#304835 = CARTESIAN_POINT('',(139.637255,-118.5,0.)); +#304836 = VERTEX_POINT('',#304837); +#304837 = CARTESIAN_POINT('',(139.637255,-118.5,-3.5E-02)); +#304838 = LINE('',#304839,#304840); +#304839 = CARTESIAN_POINT('',(139.637255,-118.5,0.)); +#304840 = VECTOR('',#304841,1.); +#304841 = DIRECTION('',(0.,0.,-1.)); +#304842 = ORIENTED_EDGE('',*,*,#304843,.T.); +#304843 = EDGE_CURVE('',#304836,#304836,#304844,.T.); +#304844 = CIRCLE('',#304845,0.137255); +#304845 = AXIS2_PLACEMENT_3D('',#304846,#304847,#304848); +#304846 = CARTESIAN_POINT('',(139.5,-118.5,-3.5E-02)); +#304847 = DIRECTION('',(0.,0.,1.)); +#304848 = DIRECTION('',(1.,0.,-0.)); +#304849 = ORIENTED_EDGE('',*,*,#304833,.F.); +#304850 = ORIENTED_EDGE('',*,*,#304851,.F.); +#304851 = EDGE_CURVE('',#304834,#304834,#304852,.T.); +#304852 = CIRCLE('',#304853,0.137255); +#304853 = AXIS2_PLACEMENT_3D('',#304854,#304855,#304856); +#304854 = CARTESIAN_POINT('',(139.5,-118.5,0.)); +#304855 = DIRECTION('',(0.,0.,1.)); +#304856 = DIRECTION('',(1.,0.,-0.)); +#304857 = CYLINDRICAL_SURFACE('',#304858,0.137255); +#304858 = AXIS2_PLACEMENT_3D('',#304859,#304860,#304861); +#304859 = CARTESIAN_POINT('',(139.5,-118.5,0.)); +#304860 = DIRECTION('',(0.,0.,1.)); +#304861 = DIRECTION('',(1.,0.,-0.)); +#304862 = ADVANCED_FACE('',(#304863,#304876),#304879,.F.); +#304863 = FACE_BOUND('',#304864,.F.); +#304864 = EDGE_LOOP('',(#304865,#304866,#304867,#304868,#304869,#304870, + #304871,#304872,#304873,#304874,#304875)); +#304865 = ORIENTED_EDGE('',*,*,#304515,.T.); +#304866 = ORIENTED_EDGE('',*,*,#304547,.T.); +#304867 = ORIENTED_EDGE('',*,*,#304578,.T.); +#304868 = ORIENTED_EDGE('',*,*,#304609,.T.); +#304869 = ORIENTED_EDGE('',*,*,#304640,.T.); +#304870 = ORIENTED_EDGE('',*,*,#304672,.T.); +#304871 = ORIENTED_EDGE('',*,*,#304704,.T.); +#304872 = ORIENTED_EDGE('',*,*,#304735,.T.); +#304873 = ORIENTED_EDGE('',*,*,#304766,.T.); +#304874 = ORIENTED_EDGE('',*,*,#304797,.T.); +#304875 = ORIENTED_EDGE('',*,*,#304819,.T.); +#304876 = FACE_BOUND('',#304877,.F.); +#304877 = EDGE_LOOP('',(#304878)); +#304878 = ORIENTED_EDGE('',*,*,#304851,.T.); +#304879 = PLANE('',#304880); +#304880 = AXIS2_PLACEMENT_3D('',#304881,#304882,#304883); +#304881 = CARTESIAN_POINT('',(0.,0.,0.)); +#304882 = DIRECTION('',(-0.,-0.,-1.)); +#304883 = DIRECTION('',(-1.,0.,0.)); +#304884 = ADVANCED_FACE('',(#304885,#304898),#304901,.T.); +#304885 = FACE_BOUND('',#304886,.T.); +#304886 = EDGE_LOOP('',(#304887,#304888,#304889,#304890,#304891,#304892, + #304893,#304894,#304895,#304896,#304897)); +#304887 = ORIENTED_EDGE('',*,*,#304498,.T.); +#304888 = ORIENTED_EDGE('',*,*,#304531,.T.); +#304889 = ORIENTED_EDGE('',*,*,#304562,.T.); +#304890 = ORIENTED_EDGE('',*,*,#304593,.T.); +#304891 = ORIENTED_EDGE('',*,*,#304624,.T.); +#304892 = ORIENTED_EDGE('',*,*,#304655,.T.); +#304893 = ORIENTED_EDGE('',*,*,#304688,.T.); +#304894 = ORIENTED_EDGE('',*,*,#304719,.T.); +#304895 = ORIENTED_EDGE('',*,*,#304750,.T.); +#304896 = ORIENTED_EDGE('',*,*,#304781,.T.); +#304897 = ORIENTED_EDGE('',*,*,#304812,.T.); +#304898 = FACE_BOUND('',#304899,.T.); +#304899 = EDGE_LOOP('',(#304900)); +#304900 = ORIENTED_EDGE('',*,*,#304843,.T.); +#304901 = PLANE('',#304902); +#304902 = AXIS2_PLACEMENT_3D('',#304903,#304904,#304905); +#304903 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#304904 = DIRECTION('',(-0.,-0.,-1.)); +#304905 = DIRECTION('',(-1.,0.,0.)); +#304906 = MANIFOLD_SOLID_BREP('',#304907); +#304907 = CLOSED_SHELL('',(#304908,#304948,#304981,#305012,#305043, + #305076,#305098,#305131,#305148)); +#304908 = ADVANCED_FACE('',(#304909),#304943,.F.); +#304909 = FACE_BOUND('',#304910,.F.); +#304910 = EDGE_LOOP('',(#304911,#304921,#304929,#304937)); +#304911 = ORIENTED_EDGE('',*,*,#304912,.T.); +#304912 = EDGE_CURVE('',#304913,#304915,#304917,.T.); +#304913 = VERTEX_POINT('',#304914); +#304914 = CARTESIAN_POINT('',(125.281131,-117.9,0.)); +#304915 = VERTEX_POINT('',#304916); +#304916 = CARTESIAN_POINT('',(125.281131,-117.9,-3.5E-02)); +#304917 = LINE('',#304918,#304919); +#304918 = CARTESIAN_POINT('',(125.281131,-117.9,0.)); +#304919 = VECTOR('',#304920,1.); +#304920 = DIRECTION('',(0.,0.,-1.)); +#304921 = ORIENTED_EDGE('',*,*,#304922,.T.); +#304922 = EDGE_CURVE('',#304915,#304923,#304925,.T.); +#304923 = VERTEX_POINT('',#304924); +#304924 = CARTESIAN_POINT('',(126.119509,-117.901921,-3.5E-02)); +#304925 = LINE('',#304926,#304927); +#304926 = CARTESIAN_POINT('',(125.281131,-117.9,-3.5E-02)); +#304927 = VECTOR('',#304928,1.); +#304928 = DIRECTION('',(0.999997374916,-2.29132319456E-03,0.)); +#304929 = ORIENTED_EDGE('',*,*,#304930,.F.); +#304930 = EDGE_CURVE('',#304931,#304923,#304933,.T.); +#304931 = VERTEX_POINT('',#304932); +#304932 = CARTESIAN_POINT('',(126.119509,-117.901921,0.)); +#304933 = LINE('',#304934,#304935); +#304934 = CARTESIAN_POINT('',(126.119509,-117.901921,0.)); +#304935 = VECTOR('',#304936,1.); +#304936 = DIRECTION('',(0.,0.,-1.)); +#304937 = ORIENTED_EDGE('',*,*,#304938,.F.); +#304938 = EDGE_CURVE('',#304913,#304931,#304939,.T.); +#304939 = LINE('',#304940,#304941); +#304940 = CARTESIAN_POINT('',(125.281131,-117.9,0.)); +#304941 = VECTOR('',#304942,1.); +#304942 = DIRECTION('',(0.999997374916,-2.29132319456E-03,0.)); +#304943 = PLANE('',#304944); +#304944 = AXIS2_PLACEMENT_3D('',#304945,#304946,#304947); +#304945 = CARTESIAN_POINT('',(125.281131,-117.9,0.)); +#304946 = DIRECTION('',(-2.29132319456E-03,-0.999997374916,-0.)); +#304947 = DIRECTION('',(0.999997374916,-2.29132319456E-03,0.)); +#304948 = ADVANCED_FACE('',(#304949),#304976,.T.); +#304949 = FACE_BOUND('',#304950,.F.); +#304950 = EDGE_LOOP('',(#304951,#304952,#304961,#304969)); +#304951 = ORIENTED_EDGE('',*,*,#304930,.T.); +#304952 = ORIENTED_EDGE('',*,*,#304953,.T.); +#304953 = EDGE_CURVE('',#304923,#304954,#304956,.T.); +#304954 = VERTEX_POINT('',#304955); +#304955 = CARTESIAN_POINT('',(126.119509,-118.098079,-3.5E-02)); +#304956 = CIRCLE('',#304957,0.100000456609); +#304957 = AXIS2_PLACEMENT_3D('',#304958,#304959,#304960); +#304958 = CARTESIAN_POINT('',(126.1,-118.,-3.5E-02)); +#304959 = DIRECTION('',(0.,0.,-1.)); +#304960 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#304961 = ORIENTED_EDGE('',*,*,#304962,.F.); +#304962 = EDGE_CURVE('',#304963,#304954,#304965,.T.); +#304963 = VERTEX_POINT('',#304964); +#304964 = CARTESIAN_POINT('',(126.119509,-118.098079,0.)); +#304965 = LINE('',#304966,#304967); +#304966 = CARTESIAN_POINT('',(126.119509,-118.098079,0.)); +#304967 = VECTOR('',#304968,1.); +#304968 = DIRECTION('',(0.,0.,-1.)); +#304969 = ORIENTED_EDGE('',*,*,#304970,.F.); +#304970 = EDGE_CURVE('',#304931,#304963,#304971,.T.); +#304971 = CIRCLE('',#304972,0.100000456609); +#304972 = AXIS2_PLACEMENT_3D('',#304973,#304974,#304975); +#304973 = CARTESIAN_POINT('',(126.1,-118.,0.)); +#304974 = DIRECTION('',(0.,0.,-1.)); +#304975 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#304976 = CYLINDRICAL_SURFACE('',#304977,0.100000456609); +#304977 = AXIS2_PLACEMENT_3D('',#304978,#304979,#304980); +#304978 = CARTESIAN_POINT('',(126.1,-118.,0.)); +#304979 = DIRECTION('',(-0.,-0.,1.)); +#304980 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#304981 = ADVANCED_FACE('',(#304982),#305007,.F.); +#304982 = FACE_BOUND('',#304983,.F.); +#304983 = EDGE_LOOP('',(#304984,#304985,#304993,#305001)); +#304984 = ORIENTED_EDGE('',*,*,#304962,.T.); +#304985 = ORIENTED_EDGE('',*,*,#304986,.T.); +#304986 = EDGE_CURVE('',#304954,#304987,#304989,.T.); +#304987 = VERTEX_POINT('',#304988); +#304988 = CARTESIAN_POINT('',(125.281131,-118.1,-3.5E-02)); +#304989 = LINE('',#304990,#304991); +#304990 = CARTESIAN_POINT('',(126.119509,-118.098079,-3.5E-02)); +#304991 = VECTOR('',#304992,1.); +#304992 = DIRECTION('',(-0.999997374916,-2.29132319456E-03,0.)); +#304993 = ORIENTED_EDGE('',*,*,#304994,.F.); +#304994 = EDGE_CURVE('',#304995,#304987,#304997,.T.); +#304995 = VERTEX_POINT('',#304996); +#304996 = CARTESIAN_POINT('',(125.281131,-118.1,0.)); +#304997 = LINE('',#304998,#304999); +#304998 = CARTESIAN_POINT('',(125.281131,-118.1,0.)); +#304999 = VECTOR('',#305000,1.); +#305000 = DIRECTION('',(0.,0.,-1.)); +#305001 = ORIENTED_EDGE('',*,*,#305002,.F.); +#305002 = EDGE_CURVE('',#304963,#304995,#305003,.T.); +#305003 = LINE('',#305004,#305005); +#305004 = CARTESIAN_POINT('',(126.119509,-118.098079,0.)); +#305005 = VECTOR('',#305006,1.); +#305006 = DIRECTION('',(-0.999997374916,-2.29132319456E-03,0.)); +#305007 = PLANE('',#305008); +#305008 = AXIS2_PLACEMENT_3D('',#305009,#305010,#305011); +#305009 = CARTESIAN_POINT('',(126.119509,-118.098079,0.)); +#305010 = DIRECTION('',(-2.29132319456E-03,0.999997374916,0.)); +#305011 = DIRECTION('',(-0.999997374916,-2.29132319456E-03,0.)); +#305012 = ADVANCED_FACE('',(#305013),#305038,.F.); +#305013 = FACE_BOUND('',#305014,.F.); +#305014 = EDGE_LOOP('',(#305015,#305016,#305024,#305032)); +#305015 = ORIENTED_EDGE('',*,*,#304994,.T.); +#305016 = ORIENTED_EDGE('',*,*,#305017,.T.); +#305017 = EDGE_CURVE('',#304987,#305018,#305020,.T.); +#305018 = VERTEX_POINT('',#305019); +#305019 = CARTESIAN_POINT('',(125.277164,-118.114805,-3.5E-02)); +#305020 = LINE('',#305021,#305022); +#305021 = CARTESIAN_POINT('',(125.281131,-118.1,-3.5E-02)); +#305022 = VECTOR('',#305023,1.); +#305023 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#305024 = ORIENTED_EDGE('',*,*,#305025,.F.); +#305025 = EDGE_CURVE('',#305026,#305018,#305028,.T.); +#305026 = VERTEX_POINT('',#305027); +#305027 = CARTESIAN_POINT('',(125.277164,-118.114805,0.)); +#305028 = LINE('',#305029,#305030); +#305029 = CARTESIAN_POINT('',(125.277164,-118.114805,0.)); +#305030 = VECTOR('',#305031,1.); +#305031 = DIRECTION('',(0.,0.,-1.)); +#305032 = ORIENTED_EDGE('',*,*,#305033,.F.); +#305033 = EDGE_CURVE('',#304995,#305026,#305034,.T.); +#305034 = LINE('',#305035,#305036); +#305035 = CARTESIAN_POINT('',(125.281131,-118.1,0.)); +#305036 = VECTOR('',#305037,1.); +#305037 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#305038 = PLANE('',#305039); +#305039 = AXIS2_PLACEMENT_3D('',#305040,#305041,#305042); +#305040 = CARTESIAN_POINT('',(125.281131,-118.1,0.)); +#305041 = DIRECTION('',(-0.965925627198,0.258819788119,0.)); +#305042 = DIRECTION('',(-0.258819788119,-0.965925627198,0.)); +#305043 = ADVANCED_FACE('',(#305044),#305071,.T.); +#305044 = FACE_BOUND('',#305045,.F.); +#305045 = EDGE_LOOP('',(#305046,#305047,#305056,#305064)); +#305046 = ORIENTED_EDGE('',*,*,#305025,.T.); +#305047 = ORIENTED_EDGE('',*,*,#305048,.T.); +#305048 = EDGE_CURVE('',#305018,#305049,#305051,.T.); +#305049 = VERTEX_POINT('',#305050); +#305050 = CARTESIAN_POINT('',(125.277164,-117.885195,-3.5E-02)); +#305051 = CIRCLE('',#305052,0.299999888633); +#305052 = AXIS2_PLACEMENT_3D('',#305053,#305054,#305055); +#305053 = CARTESIAN_POINT('',(125.00000024848,-118.,-3.5E-02)); +#305054 = DIRECTION('',(-0.,0.,-1.)); +#305055 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#305056 = ORIENTED_EDGE('',*,*,#305057,.F.); +#305057 = EDGE_CURVE('',#305058,#305049,#305060,.T.); +#305058 = VERTEX_POINT('',#305059); +#305059 = CARTESIAN_POINT('',(125.277164,-117.885195,0.)); +#305060 = LINE('',#305061,#305062); +#305061 = CARTESIAN_POINT('',(125.277164,-117.885195,0.)); +#305062 = VECTOR('',#305063,1.); +#305063 = DIRECTION('',(0.,0.,-1.)); +#305064 = ORIENTED_EDGE('',*,*,#305065,.F.); +#305065 = EDGE_CURVE('',#305026,#305058,#305066,.T.); +#305066 = CIRCLE('',#305067,0.299999888633); +#305067 = AXIS2_PLACEMENT_3D('',#305068,#305069,#305070); +#305068 = CARTESIAN_POINT('',(125.00000024848,-118.,0.)); +#305069 = DIRECTION('',(-0.,0.,-1.)); +#305070 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#305071 = CYLINDRICAL_SURFACE('',#305072,0.299999888633); +#305072 = AXIS2_PLACEMENT_3D('',#305073,#305074,#305075); +#305073 = CARTESIAN_POINT('',(125.00000024848,-118.,0.)); +#305074 = DIRECTION('',(0.,-0.,1.)); +#305075 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#305076 = ADVANCED_FACE('',(#305077),#305093,.F.); +#305077 = FACE_BOUND('',#305078,.F.); +#305078 = EDGE_LOOP('',(#305079,#305080,#305086,#305087)); +#305079 = ORIENTED_EDGE('',*,*,#305057,.T.); +#305080 = ORIENTED_EDGE('',*,*,#305081,.T.); +#305081 = EDGE_CURVE('',#305049,#304915,#305082,.T.); +#305082 = LINE('',#305083,#305084); +#305083 = CARTESIAN_POINT('',(125.277164,-117.885195,-3.5E-02)); +#305084 = VECTOR('',#305085,1.); +#305085 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#305086 = ORIENTED_EDGE('',*,*,#304912,.F.); +#305087 = ORIENTED_EDGE('',*,*,#305088,.F.); +#305088 = EDGE_CURVE('',#305058,#304913,#305089,.T.); +#305089 = LINE('',#305090,#305091); +#305090 = CARTESIAN_POINT('',(125.277164,-117.885195,0.)); +#305091 = VECTOR('',#305092,1.); +#305092 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#305093 = PLANE('',#305094); +#305094 = AXIS2_PLACEMENT_3D('',#305095,#305096,#305097); +#305095 = CARTESIAN_POINT('',(125.277164,-117.885195,0.)); +#305096 = DIRECTION('',(-0.965925627198,-0.258819788119,-0.)); +#305097 = DIRECTION('',(0.258819788119,-0.965925627198,0.)); +#305098 = ADVANCED_FACE('',(#305099),#305126,.F.); +#305099 = FACE_BOUND('',#305100,.F.); +#305100 = EDGE_LOOP('',(#305101,#305111,#305118,#305119)); +#305101 = ORIENTED_EDGE('',*,*,#305102,.T.); +#305102 = EDGE_CURVE('',#305103,#305105,#305107,.T.); +#305103 = VERTEX_POINT('',#305104); +#305104 = CARTESIAN_POINT('',(125.137255,-118.,0.)); +#305105 = VERTEX_POINT('',#305106); +#305106 = CARTESIAN_POINT('',(125.137255,-118.,-3.5E-02)); +#305107 = LINE('',#305108,#305109); +#305108 = CARTESIAN_POINT('',(125.137255,-118.,0.)); +#305109 = VECTOR('',#305110,1.); +#305110 = DIRECTION('',(0.,0.,-1.)); +#305111 = ORIENTED_EDGE('',*,*,#305112,.T.); +#305112 = EDGE_CURVE('',#305105,#305105,#305113,.T.); +#305113 = CIRCLE('',#305114,0.137255); +#305114 = AXIS2_PLACEMENT_3D('',#305115,#305116,#305117); +#305115 = CARTESIAN_POINT('',(125.,-118.,-3.5E-02)); +#305116 = DIRECTION('',(0.,0.,1.)); +#305117 = DIRECTION('',(1.,0.,-0.)); +#305118 = ORIENTED_EDGE('',*,*,#305102,.F.); +#305119 = ORIENTED_EDGE('',*,*,#305120,.F.); +#305120 = EDGE_CURVE('',#305103,#305103,#305121,.T.); +#305121 = CIRCLE('',#305122,0.137255); +#305122 = AXIS2_PLACEMENT_3D('',#305123,#305124,#305125); +#305123 = CARTESIAN_POINT('',(125.,-118.,0.)); +#305124 = DIRECTION('',(0.,0.,1.)); +#305125 = DIRECTION('',(1.,0.,-0.)); +#305126 = CYLINDRICAL_SURFACE('',#305127,0.137255); +#305127 = AXIS2_PLACEMENT_3D('',#305128,#305129,#305130); +#305128 = CARTESIAN_POINT('',(125.,-118.,0.)); +#305129 = DIRECTION('',(0.,0.,1.)); +#305130 = DIRECTION('',(1.,0.,-0.)); +#305131 = ADVANCED_FACE('',(#305132,#305140),#305143,.F.); +#305132 = FACE_BOUND('',#305133,.F.); +#305133 = EDGE_LOOP('',(#305134,#305135,#305136,#305137,#305138,#305139) + ); +#305134 = ORIENTED_EDGE('',*,*,#304938,.T.); +#305135 = ORIENTED_EDGE('',*,*,#304970,.T.); +#305136 = ORIENTED_EDGE('',*,*,#305002,.T.); +#305137 = ORIENTED_EDGE('',*,*,#305033,.T.); +#305138 = ORIENTED_EDGE('',*,*,#305065,.T.); +#305139 = ORIENTED_EDGE('',*,*,#305088,.T.); +#305140 = FACE_BOUND('',#305141,.F.); +#305141 = EDGE_LOOP('',(#305142)); +#305142 = ORIENTED_EDGE('',*,*,#305120,.T.); +#305143 = PLANE('',#305144); +#305144 = AXIS2_PLACEMENT_3D('',#305145,#305146,#305147); +#305145 = CARTESIAN_POINT('',(0.,0.,0.)); +#305146 = DIRECTION('',(-0.,-0.,-1.)); +#305147 = DIRECTION('',(-1.,0.,0.)); +#305148 = ADVANCED_FACE('',(#305149,#305157),#305160,.T.); +#305149 = FACE_BOUND('',#305150,.T.); +#305150 = EDGE_LOOP('',(#305151,#305152,#305153,#305154,#305155,#305156) + ); +#305151 = ORIENTED_EDGE('',*,*,#304922,.T.); +#305152 = ORIENTED_EDGE('',*,*,#304953,.T.); +#305153 = ORIENTED_EDGE('',*,*,#304986,.T.); +#305154 = ORIENTED_EDGE('',*,*,#305017,.T.); +#305155 = ORIENTED_EDGE('',*,*,#305048,.T.); +#305156 = ORIENTED_EDGE('',*,*,#305081,.T.); +#305157 = FACE_BOUND('',#305158,.T.); +#305158 = EDGE_LOOP('',(#305159)); +#305159 = ORIENTED_EDGE('',*,*,#305112,.T.); +#305160 = PLANE('',#305161); +#305161 = AXIS2_PLACEMENT_3D('',#305162,#305163,#305164); +#305162 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#305163 = DIRECTION('',(-0.,-0.,-1.)); +#305164 = DIRECTION('',(-1.,0.,0.)); +#305165 = MANIFOLD_SOLID_BREP('',#305166); +#305166 = CLOSED_SHELL('',(#305167,#305207,#305238,#305269,#305302, + #305333,#305364,#305395,#305428,#305450,#305483,#305503)); +#305167 = ADVANCED_FACE('',(#305168),#305202,.F.); +#305168 = FACE_BOUND('',#305169,.F.); +#305169 = EDGE_LOOP('',(#305170,#305180,#305188,#305196)); +#305170 = ORIENTED_EDGE('',*,*,#305171,.T.); +#305171 = EDGE_CURVE('',#305172,#305174,#305176,.T.); +#305172 = VERTEX_POINT('',#305173); +#305173 = CARTESIAN_POINT('',(123.424449,-115.787682,0.)); +#305174 = VERTEX_POINT('',#305175); +#305175 = CARTESIAN_POINT('',(123.424449,-115.787682,-3.5E-02)); +#305176 = LINE('',#305177,#305178); +#305177 = CARTESIAN_POINT('',(123.424449,-115.787682,0.)); +#305178 = VECTOR('',#305179,1.); +#305179 = DIRECTION('',(0.,0.,-1.)); +#305180 = ORIENTED_EDGE('',*,*,#305181,.T.); +#305181 = EDGE_CURVE('',#305174,#305182,#305184,.T.); +#305182 = VERTEX_POINT('',#305183); +#305183 = CARTESIAN_POINT('',(123.323335,-115.884721,-3.5E-02)); +#305184 = LINE('',#305185,#305186); +#305185 = CARTESIAN_POINT('',(123.424449,-115.787682,-3.5E-02)); +#305186 = VECTOR('',#305187,1.); +#305187 = DIRECTION('',(-0.721495823589,-0.692418786966,0.)); +#305188 = ORIENTED_EDGE('',*,*,#305189,.F.); +#305189 = EDGE_CURVE('',#305190,#305182,#305192,.T.); +#305190 = VERTEX_POINT('',#305191); +#305191 = CARTESIAN_POINT('',(123.323335,-115.884721,0.)); +#305192 = LINE('',#305193,#305194); +#305193 = CARTESIAN_POINT('',(123.323335,-115.884721,0.)); +#305194 = VECTOR('',#305195,1.); +#305195 = DIRECTION('',(0.,0.,-1.)); +#305196 = ORIENTED_EDGE('',*,*,#305197,.F.); +#305197 = EDGE_CURVE('',#305172,#305190,#305198,.T.); +#305198 = LINE('',#305199,#305200); +#305199 = CARTESIAN_POINT('',(123.424449,-115.787682,0.)); +#305200 = VECTOR('',#305201,1.); +#305201 = DIRECTION('',(-0.721495823589,-0.692418786966,0.)); +#305202 = PLANE('',#305203); +#305203 = AXIS2_PLACEMENT_3D('',#305204,#305205,#305206); +#305204 = CARTESIAN_POINT('',(123.424449,-115.787682,0.)); +#305205 = DIRECTION('',(-0.692418786966,0.721495823589,0.)); +#305206 = DIRECTION('',(-0.721495823589,-0.692418786966,0.)); +#305207 = ADVANCED_FACE('',(#305208),#305233,.F.); +#305208 = FACE_BOUND('',#305209,.F.); +#305209 = EDGE_LOOP('',(#305210,#305211,#305219,#305227)); +#305210 = ORIENTED_EDGE('',*,*,#305189,.T.); +#305211 = ORIENTED_EDGE('',*,*,#305212,.T.); +#305212 = EDGE_CURVE('',#305182,#305213,#305215,.T.); +#305213 = VERTEX_POINT('',#305214); +#305214 = CARTESIAN_POINT('',(123.269264,-115.907118,-3.5E-02)); +#305215 = LINE('',#305216,#305217); +#305216 = CARTESIAN_POINT('',(123.323335,-115.884721,-3.5E-02)); +#305217 = VECTOR('',#305218,1.); +#305218 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#305219 = ORIENTED_EDGE('',*,*,#305220,.F.); +#305220 = EDGE_CURVE('',#305221,#305213,#305223,.T.); +#305221 = VERTEX_POINT('',#305222); +#305222 = CARTESIAN_POINT('',(123.269264,-115.907118,0.)); +#305223 = LINE('',#305224,#305225); +#305224 = CARTESIAN_POINT('',(123.269264,-115.907118,0.)); +#305225 = VECTOR('',#305226,1.); +#305226 = DIRECTION('',(0.,0.,-1.)); +#305227 = ORIENTED_EDGE('',*,*,#305228,.F.); +#305228 = EDGE_CURVE('',#305190,#305221,#305229,.T.); +#305229 = LINE('',#305230,#305231); +#305230 = CARTESIAN_POINT('',(123.323335,-115.884721,0.)); +#305231 = VECTOR('',#305232,1.); +#305232 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#305233 = PLANE('',#305234); +#305234 = AXIS2_PLACEMENT_3D('',#305235,#305236,#305237); +#305235 = CARTESIAN_POINT('',(123.323335,-115.884721,0.)); +#305236 = DIRECTION('',(-0.382684285085,0.923879179303,0.)); +#305237 = DIRECTION('',(-0.923879179303,-0.382684285085,0.)); +#305238 = ADVANCED_FACE('',(#305239),#305264,.F.); +#305239 = FACE_BOUND('',#305240,.F.); +#305240 = EDGE_LOOP('',(#305241,#305242,#305250,#305258)); +#305241 = ORIENTED_EDGE('',*,*,#305220,.T.); +#305242 = ORIENTED_EDGE('',*,*,#305243,.T.); +#305243 = EDGE_CURVE('',#305213,#305244,#305246,.T.); +#305244 = VERTEX_POINT('',#305245); +#305245 = CARTESIAN_POINT('',(122.495736,-115.907118,-3.5E-02)); +#305246 = LINE('',#305247,#305248); +#305247 = CARTESIAN_POINT('',(123.269264,-115.907118,-3.5E-02)); +#305248 = VECTOR('',#305249,1.); +#305249 = DIRECTION('',(-1.,0.,0.)); +#305250 = ORIENTED_EDGE('',*,*,#305251,.F.); +#305251 = EDGE_CURVE('',#305252,#305244,#305254,.T.); +#305252 = VERTEX_POINT('',#305253); +#305253 = CARTESIAN_POINT('',(122.495736,-115.907118,0.)); +#305254 = LINE('',#305255,#305256); +#305255 = CARTESIAN_POINT('',(122.495736,-115.907118,0.)); +#305256 = VECTOR('',#305257,1.); +#305257 = DIRECTION('',(0.,0.,-1.)); +#305258 = ORIENTED_EDGE('',*,*,#305259,.F.); +#305259 = EDGE_CURVE('',#305221,#305252,#305260,.T.); +#305260 = LINE('',#305261,#305262); +#305261 = CARTESIAN_POINT('',(123.269264,-115.907118,0.)); +#305262 = VECTOR('',#305263,1.); +#305263 = DIRECTION('',(-1.,0.,0.)); +#305264 = PLANE('',#305265); +#305265 = AXIS2_PLACEMENT_3D('',#305266,#305267,#305268); +#305266 = CARTESIAN_POINT('',(123.269264,-115.907118,0.)); +#305267 = DIRECTION('',(0.,1.,0.)); +#305268 = DIRECTION('',(-1.,0.,0.)); +#305269 = ADVANCED_FACE('',(#305270),#305297,.T.); +#305270 = FACE_BOUND('',#305271,.F.); +#305271 = EDGE_LOOP('',(#305272,#305273,#305282,#305290)); +#305272 = ORIENTED_EDGE('',*,*,#305251,.T.); +#305273 = ORIENTED_EDGE('',*,*,#305274,.T.); +#305274 = EDGE_CURVE('',#305244,#305275,#305277,.T.); +#305275 = VERTEX_POINT('',#305276); +#305276 = CARTESIAN_POINT('',(122.495736,-115.612882,-3.5E-02)); +#305277 = CIRCLE('',#305278,0.150000292066); +#305278 = AXIS2_PLACEMENT_3D('',#305279,#305280,#305281); +#305279 = CARTESIAN_POINT('',(122.525,-115.76,-3.5E-02)); +#305280 = DIRECTION('',(0.,0.,-1.)); +#305281 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#305282 = ORIENTED_EDGE('',*,*,#305283,.F.); +#305283 = EDGE_CURVE('',#305284,#305275,#305286,.T.); +#305284 = VERTEX_POINT('',#305285); +#305285 = CARTESIAN_POINT('',(122.495736,-115.612882,0.)); +#305286 = LINE('',#305287,#305288); +#305287 = CARTESIAN_POINT('',(122.495736,-115.612882,0.)); +#305288 = VECTOR('',#305289,1.); +#305289 = DIRECTION('',(0.,0.,-1.)); +#305290 = ORIENTED_EDGE('',*,*,#305291,.F.); +#305291 = EDGE_CURVE('',#305252,#305284,#305292,.T.); +#305292 = CIRCLE('',#305293,0.150000292066); +#305293 = AXIS2_PLACEMENT_3D('',#305294,#305295,#305296); +#305294 = CARTESIAN_POINT('',(122.525,-115.76,0.)); +#305295 = DIRECTION('',(0.,0.,-1.)); +#305296 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#305297 = CYLINDRICAL_SURFACE('',#305298,0.150000292066); +#305298 = AXIS2_PLACEMENT_3D('',#305299,#305300,#305301); +#305299 = CARTESIAN_POINT('',(122.525,-115.76,0.)); +#305300 = DIRECTION('',(-0.,-0.,1.)); +#305301 = DIRECTION('',(-0.195092953466,-0.980784756972,-0.)); +#305302 = ADVANCED_FACE('',(#305303),#305328,.F.); +#305303 = FACE_BOUND('',#305304,.F.); +#305304 = EDGE_LOOP('',(#305305,#305306,#305314,#305322)); +#305305 = ORIENTED_EDGE('',*,*,#305283,.T.); +#305306 = ORIENTED_EDGE('',*,*,#305307,.T.); +#305307 = EDGE_CURVE('',#305275,#305308,#305310,.T.); +#305308 = VERTEX_POINT('',#305309); +#305309 = CARTESIAN_POINT('',(123.177868,-115.61,-3.5E-02)); +#305310 = LINE('',#305311,#305312); +#305311 = CARTESIAN_POINT('',(122.495736,-115.612882,-3.5E-02)); +#305312 = VECTOR('',#305313,1.); +#305313 = DIRECTION('',(0.999991074855,4.224951003223E-03,0.)); +#305314 = ORIENTED_EDGE('',*,*,#305315,.F.); +#305315 = EDGE_CURVE('',#305316,#305308,#305318,.T.); +#305316 = VERTEX_POINT('',#305317); +#305317 = CARTESIAN_POINT('',(123.177868,-115.61,0.)); +#305318 = LINE('',#305319,#305320); +#305319 = CARTESIAN_POINT('',(123.177868,-115.61,0.)); +#305320 = VECTOR('',#305321,1.); +#305321 = DIRECTION('',(0.,0.,-1.)); +#305322 = ORIENTED_EDGE('',*,*,#305323,.F.); +#305323 = EDGE_CURVE('',#305284,#305316,#305324,.T.); +#305324 = LINE('',#305325,#305326); +#305325 = CARTESIAN_POINT('',(122.495736,-115.612882,0.)); +#305326 = VECTOR('',#305327,1.); +#305327 = DIRECTION('',(0.999991074855,4.224951003223E-03,0.)); +#305328 = PLANE('',#305329); +#305329 = AXIS2_PLACEMENT_3D('',#305330,#305331,#305332); +#305330 = CARTESIAN_POINT('',(122.495736,-115.612882,0.)); +#305331 = DIRECTION('',(4.224951003223E-03,-0.999991074855,0.)); +#305332 = DIRECTION('',(0.999991074855,4.224951003223E-03,0.)); +#305333 = ADVANCED_FACE('',(#305334),#305359,.F.); +#305334 = FACE_BOUND('',#305335,.F.); +#305335 = EDGE_LOOP('',(#305336,#305337,#305345,#305353)); +#305336 = ORIENTED_EDGE('',*,*,#305315,.T.); +#305337 = ORIENTED_EDGE('',*,*,#305338,.T.); +#305338 = EDGE_CURVE('',#305308,#305339,#305341,.T.); +#305339 = VERTEX_POINT('',#305340); +#305340 = CARTESIAN_POINT('',(123.212317,-115.57555,-3.5E-02)); +#305341 = LINE('',#305342,#305343); +#305342 = CARTESIAN_POINT('',(123.177868,-115.61,-3.5E-02)); +#305343 = VECTOR('',#305344,1.); +#305344 = DIRECTION('',(0.707096518165,0.707117044059,0.)); +#305345 = ORIENTED_EDGE('',*,*,#305346,.F.); +#305346 = EDGE_CURVE('',#305347,#305339,#305349,.T.); +#305347 = VERTEX_POINT('',#305348); +#305348 = CARTESIAN_POINT('',(123.212317,-115.57555,0.)); +#305349 = LINE('',#305350,#305351); +#305350 = CARTESIAN_POINT('',(123.212317,-115.57555,0.)); +#305351 = VECTOR('',#305352,1.); +#305352 = DIRECTION('',(0.,0.,-1.)); +#305353 = ORIENTED_EDGE('',*,*,#305354,.F.); +#305354 = EDGE_CURVE('',#305316,#305347,#305355,.T.); +#305355 = LINE('',#305356,#305357); +#305356 = CARTESIAN_POINT('',(123.177868,-115.61,0.)); +#305357 = VECTOR('',#305358,1.); +#305358 = DIRECTION('',(0.707096518165,0.707117044059,0.)); +#305359 = PLANE('',#305360); +#305360 = AXIS2_PLACEMENT_3D('',#305361,#305362,#305363); +#305361 = CARTESIAN_POINT('',(123.177868,-115.61,0.)); +#305362 = DIRECTION('',(0.707117044059,-0.707096518165,0.)); +#305363 = DIRECTION('',(0.707096518165,0.707117044059,0.)); +#305364 = ADVANCED_FACE('',(#305365),#305390,.F.); +#305365 = FACE_BOUND('',#305366,.F.); +#305366 = EDGE_LOOP('',(#305367,#305368,#305376,#305384)); +#305367 = ORIENTED_EDGE('',*,*,#305346,.T.); +#305368 = ORIENTED_EDGE('',*,*,#305369,.T.); +#305369 = EDGE_CURVE('',#305339,#305370,#305372,.T.); +#305370 = VERTEX_POINT('',#305371); +#305371 = CARTESIAN_POINT('',(123.202567,-115.539158,-3.5E-02)); +#305372 = LINE('',#305373,#305374); +#305373 = CARTESIAN_POINT('',(123.212317,-115.57555,-3.5E-02)); +#305374 = VECTOR('',#305375,1.); +#305375 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#305376 = ORIENTED_EDGE('',*,*,#305377,.F.); +#305377 = EDGE_CURVE('',#305378,#305370,#305380,.T.); +#305378 = VERTEX_POINT('',#305379); +#305379 = CARTESIAN_POINT('',(123.202567,-115.539158,0.)); +#305380 = LINE('',#305381,#305382); +#305381 = CARTESIAN_POINT('',(123.202567,-115.539158,0.)); +#305382 = VECTOR('',#305383,1.); +#305383 = DIRECTION('',(0.,0.,-1.)); +#305384 = ORIENTED_EDGE('',*,*,#305385,.F.); +#305385 = EDGE_CURVE('',#305347,#305378,#305386,.T.); +#305386 = LINE('',#305387,#305388); +#305387 = CARTESIAN_POINT('',(123.212317,-115.57555,0.)); +#305388 = VECTOR('',#305389,1.); +#305389 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#305390 = PLANE('',#305391); +#305391 = AXIS2_PLACEMENT_3D('',#305392,#305393,#305394); +#305392 = CARTESIAN_POINT('',(123.212317,-115.57555,0.)); +#305393 = DIRECTION('',(0.965933835092,0.258789153994,0.)); +#305394 = DIRECTION('',(-0.258789153994,0.965933835092,0.)); +#305395 = ADVANCED_FACE('',(#305396),#305423,.T.); +#305396 = FACE_BOUND('',#305397,.F.); +#305397 = EDGE_LOOP('',(#305398,#305399,#305408,#305416)); +#305398 = ORIENTED_EDGE('',*,*,#305377,.T.); +#305399 = ORIENTED_EDGE('',*,*,#305400,.T.); +#305400 = EDGE_CURVE('',#305370,#305401,#305403,.T.); +#305401 = VERTEX_POINT('',#305402); +#305402 = CARTESIAN_POINT('',(123.460842,-115.797433,-3.5E-02)); +#305403 = CIRCLE('',#305404,0.300000634557); +#305404 = AXIS2_PLACEMENT_3D('',#305405,#305406,#305407); +#305405 = CARTESIAN_POINT('',(123.50000095409,-115.4999990459,-3.5E-02) + ); +#305406 = DIRECTION('',(0.,0.,-1.)); +#305407 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#305408 = ORIENTED_EDGE('',*,*,#305409,.F.); +#305409 = EDGE_CURVE('',#305410,#305401,#305412,.T.); +#305410 = VERTEX_POINT('',#305411); +#305411 = CARTESIAN_POINT('',(123.460842,-115.797433,0.)); +#305412 = LINE('',#305413,#305414); +#305413 = CARTESIAN_POINT('',(123.460842,-115.797433,0.)); +#305414 = VECTOR('',#305415,1.); +#305415 = DIRECTION('',(0.,0.,-1.)); +#305416 = ORIENTED_EDGE('',*,*,#305417,.F.); +#305417 = EDGE_CURVE('',#305378,#305410,#305418,.T.); +#305418 = CIRCLE('',#305419,0.300000634557); +#305419 = AXIS2_PLACEMENT_3D('',#305420,#305421,#305422); +#305420 = CARTESIAN_POINT('',(123.50000095409,-115.4999990459,0.)); +#305421 = DIRECTION('',(0.,0.,-1.)); +#305422 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#305423 = CYLINDRICAL_SURFACE('',#305424,0.300000634557); +#305424 = AXIS2_PLACEMENT_3D('',#305425,#305426,#305427); +#305425 = CARTESIAN_POINT('',(123.50000095409,-115.4999990459,0.)); +#305426 = DIRECTION('',(-0.,-0.,1.)); +#305427 = DIRECTION('',(-0.991444416558,-0.130529570891,-0.)); +#305428 = ADVANCED_FACE('',(#305429),#305445,.F.); +#305429 = FACE_BOUND('',#305430,.F.); +#305430 = EDGE_LOOP('',(#305431,#305432,#305438,#305439)); +#305431 = ORIENTED_EDGE('',*,*,#305409,.T.); +#305432 = ORIENTED_EDGE('',*,*,#305433,.T.); +#305433 = EDGE_CURVE('',#305401,#305174,#305434,.T.); +#305434 = LINE('',#305435,#305436); +#305435 = CARTESIAN_POINT('',(123.460842,-115.797433,-3.5E-02)); +#305436 = VECTOR('',#305437,1.); +#305437 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#305438 = ORIENTED_EDGE('',*,*,#305171,.F.); +#305439 = ORIENTED_EDGE('',*,*,#305440,.F.); +#305440 = EDGE_CURVE('',#305410,#305172,#305441,.T.); +#305441 = LINE('',#305442,#305443); +#305442 = CARTESIAN_POINT('',(123.460842,-115.797433,0.)); +#305443 = VECTOR('',#305444,1.); +#305444 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#305445 = PLANE('',#305446); +#305446 = AXIS2_PLACEMENT_3D('',#305447,#305448,#305449); +#305447 = CARTESIAN_POINT('',(123.460842,-115.797433,0.)); +#305448 = DIRECTION('',(0.25880728333,0.96592897777,0.)); +#305449 = DIRECTION('',(-0.96592897777,0.25880728333,0.)); +#305450 = ADVANCED_FACE('',(#305451),#305478,.F.); +#305451 = FACE_BOUND('',#305452,.F.); +#305452 = EDGE_LOOP('',(#305453,#305463,#305470,#305471)); +#305453 = ORIENTED_EDGE('',*,*,#305454,.T.); +#305454 = EDGE_CURVE('',#305455,#305457,#305459,.T.); +#305455 = VERTEX_POINT('',#305456); +#305456 = CARTESIAN_POINT('',(123.637255,-115.5,0.)); +#305457 = VERTEX_POINT('',#305458); +#305458 = CARTESIAN_POINT('',(123.637255,-115.5,-3.5E-02)); +#305459 = LINE('',#305460,#305461); +#305460 = CARTESIAN_POINT('',(123.637255,-115.5,0.)); +#305461 = VECTOR('',#305462,1.); +#305462 = DIRECTION('',(0.,0.,-1.)); +#305463 = ORIENTED_EDGE('',*,*,#305464,.T.); +#305464 = EDGE_CURVE('',#305457,#305457,#305465,.T.); +#305465 = CIRCLE('',#305466,0.137255); +#305466 = AXIS2_PLACEMENT_3D('',#305467,#305468,#305469); +#305467 = CARTESIAN_POINT('',(123.5,-115.5,-3.5E-02)); +#305468 = DIRECTION('',(0.,0.,1.)); +#305469 = DIRECTION('',(1.,0.,-0.)); +#305470 = ORIENTED_EDGE('',*,*,#305454,.F.); +#305471 = ORIENTED_EDGE('',*,*,#305472,.F.); +#305472 = EDGE_CURVE('',#305455,#305455,#305473,.T.); +#305473 = CIRCLE('',#305474,0.137255); +#305474 = AXIS2_PLACEMENT_3D('',#305475,#305476,#305477); +#305475 = CARTESIAN_POINT('',(123.5,-115.5,0.)); +#305476 = DIRECTION('',(0.,0.,1.)); +#305477 = DIRECTION('',(1.,0.,-0.)); +#305478 = CYLINDRICAL_SURFACE('',#305479,0.137255); +#305479 = AXIS2_PLACEMENT_3D('',#305480,#305481,#305482); +#305480 = CARTESIAN_POINT('',(123.5,-115.5,0.)); +#305481 = DIRECTION('',(0.,0.,1.)); +#305482 = DIRECTION('',(1.,0.,-0.)); +#305483 = ADVANCED_FACE('',(#305484,#305495),#305498,.F.); +#305484 = FACE_BOUND('',#305485,.F.); +#305485 = EDGE_LOOP('',(#305486,#305487,#305488,#305489,#305490,#305491, + #305492,#305493,#305494)); +#305486 = ORIENTED_EDGE('',*,*,#305197,.T.); +#305487 = ORIENTED_EDGE('',*,*,#305228,.T.); +#305488 = ORIENTED_EDGE('',*,*,#305259,.T.); +#305489 = ORIENTED_EDGE('',*,*,#305291,.T.); +#305490 = ORIENTED_EDGE('',*,*,#305323,.T.); +#305491 = ORIENTED_EDGE('',*,*,#305354,.T.); +#305492 = ORIENTED_EDGE('',*,*,#305385,.T.); +#305493 = ORIENTED_EDGE('',*,*,#305417,.T.); +#305494 = ORIENTED_EDGE('',*,*,#305440,.T.); +#305495 = FACE_BOUND('',#305496,.F.); +#305496 = EDGE_LOOP('',(#305497)); +#305497 = ORIENTED_EDGE('',*,*,#305472,.T.); +#305498 = PLANE('',#305499); +#305499 = AXIS2_PLACEMENT_3D('',#305500,#305501,#305502); +#305500 = CARTESIAN_POINT('',(0.,0.,0.)); +#305501 = DIRECTION('',(-0.,-0.,-1.)); +#305502 = DIRECTION('',(-1.,0.,0.)); +#305503 = ADVANCED_FACE('',(#305504,#305515),#305518,.T.); +#305504 = FACE_BOUND('',#305505,.T.); +#305505 = EDGE_LOOP('',(#305506,#305507,#305508,#305509,#305510,#305511, + #305512,#305513,#305514)); +#305506 = ORIENTED_EDGE('',*,*,#305181,.T.); +#305507 = ORIENTED_EDGE('',*,*,#305212,.T.); +#305508 = ORIENTED_EDGE('',*,*,#305243,.T.); +#305509 = ORIENTED_EDGE('',*,*,#305274,.T.); +#305510 = ORIENTED_EDGE('',*,*,#305307,.T.); +#305511 = ORIENTED_EDGE('',*,*,#305338,.T.); +#305512 = ORIENTED_EDGE('',*,*,#305369,.T.); +#305513 = ORIENTED_EDGE('',*,*,#305400,.T.); +#305514 = ORIENTED_EDGE('',*,*,#305433,.T.); +#305515 = FACE_BOUND('',#305516,.T.); +#305516 = EDGE_LOOP('',(#305517)); +#305517 = ORIENTED_EDGE('',*,*,#305464,.T.); +#305518 = PLANE('',#305519); +#305519 = AXIS2_PLACEMENT_3D('',#305520,#305521,#305522); +#305520 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#305521 = DIRECTION('',(-0.,-0.,-1.)); +#305522 = DIRECTION('',(-1.,0.,0.)); +#305523 = MANIFOLD_SOLID_BREP('',#305524); +#305524 = CLOSED_SHELL('',(#305525,#305565,#305596,#305629,#305660, + #305691,#305722,#305753,#305786,#305808,#305841,#305861)); +#305525 = ADVANCED_FACE('',(#305526),#305560,.F.); +#305526 = FACE_BOUND('',#305527,.F.); +#305527 = EDGE_LOOP('',(#305528,#305538,#305546,#305554)); +#305528 = ORIENTED_EDGE('',*,*,#305529,.T.); +#305529 = EDGE_CURVE('',#305530,#305532,#305534,.T.); +#305530 = VERTEX_POINT('',#305531); +#305531 = CARTESIAN_POINT('',(152.621921,-112.7695,0.)); +#305532 = VERTEX_POINT('',#305533); +#305533 = CARTESIAN_POINT('',(152.621921,-112.7695,-3.5E-02)); +#305534 = LINE('',#305535,#305536); +#305535 = CARTESIAN_POINT('',(152.621921,-112.7695,0.)); +#305536 = VECTOR('',#305537,1.); +#305537 = DIRECTION('',(0.,0.,-1.)); +#305538 = ORIENTED_EDGE('',*,*,#305539,.T.); +#305539 = EDGE_CURVE('',#305532,#305540,#305542,.T.); +#305540 = VERTEX_POINT('',#305541); +#305541 = CARTESIAN_POINT('',(151.9,-113.491422,-3.5E-02)); +#305542 = LINE('',#305543,#305544); +#305543 = CARTESIAN_POINT('',(152.621921,-112.7695,-3.5E-02)); +#305544 = VECTOR('',#305545,1.); +#305545 = DIRECTION('',(-0.707106291447,-0.707107270926,0.)); +#305546 = ORIENTED_EDGE('',*,*,#305547,.F.); +#305547 = EDGE_CURVE('',#305548,#305540,#305550,.T.); +#305548 = VERTEX_POINT('',#305549); +#305549 = CARTESIAN_POINT('',(151.9,-113.491422,0.)); +#305550 = LINE('',#305551,#305552); +#305551 = CARTESIAN_POINT('',(151.9,-113.491422,0.)); +#305552 = VECTOR('',#305553,1.); +#305553 = DIRECTION('',(0.,0.,-1.)); +#305554 = ORIENTED_EDGE('',*,*,#305555,.F.); +#305555 = EDGE_CURVE('',#305530,#305548,#305556,.T.); +#305556 = LINE('',#305557,#305558); +#305557 = CARTESIAN_POINT('',(152.621921,-112.7695,0.)); +#305558 = VECTOR('',#305559,1.); +#305559 = DIRECTION('',(-0.707106291447,-0.707107270926,0.)); +#305560 = PLANE('',#305561); +#305561 = AXIS2_PLACEMENT_3D('',#305562,#305563,#305564); +#305562 = CARTESIAN_POINT('',(152.621921,-112.7695,0.)); +#305563 = DIRECTION('',(-0.707107270926,0.707106291447,0.)); +#305564 = DIRECTION('',(-0.707106291447,-0.707107270926,0.)); +#305565 = ADVANCED_FACE('',(#305566),#305591,.F.); +#305566 = FACE_BOUND('',#305567,.F.); +#305567 = EDGE_LOOP('',(#305568,#305569,#305577,#305585)); +#305568 = ORIENTED_EDGE('',*,*,#305547,.T.); +#305569 = ORIENTED_EDGE('',*,*,#305570,.T.); +#305570 = EDGE_CURVE('',#305540,#305571,#305573,.T.); +#305571 = VERTEX_POINT('',#305572); +#305572 = CARTESIAN_POINT('',(151.898079,-113.859509,-3.5E-02)); +#305573 = LINE('',#305574,#305575); +#305574 = CARTESIAN_POINT('',(151.9,-113.491422,-3.5E-02)); +#305575 = VECTOR('',#305576,1.); +#305576 = DIRECTION('',(-5.218803814688E-03,-0.999986381951,0.)); +#305577 = ORIENTED_EDGE('',*,*,#305578,.F.); +#305578 = EDGE_CURVE('',#305579,#305571,#305581,.T.); +#305579 = VERTEX_POINT('',#305580); +#305580 = CARTESIAN_POINT('',(151.898079,-113.859509,0.)); +#305581 = LINE('',#305582,#305583); +#305582 = CARTESIAN_POINT('',(151.898079,-113.859509,0.)); +#305583 = VECTOR('',#305584,1.); +#305584 = DIRECTION('',(0.,0.,-1.)); +#305585 = ORIENTED_EDGE('',*,*,#305586,.F.); +#305586 = EDGE_CURVE('',#305548,#305579,#305587,.T.); +#305587 = LINE('',#305588,#305589); +#305588 = CARTESIAN_POINT('',(151.9,-113.491422,0.)); +#305589 = VECTOR('',#305590,1.); +#305590 = DIRECTION('',(-5.218803814688E-03,-0.999986381951,0.)); +#305591 = PLANE('',#305592); +#305592 = AXIS2_PLACEMENT_3D('',#305593,#305594,#305595); +#305593 = CARTESIAN_POINT('',(151.9,-113.491422,0.)); +#305594 = DIRECTION('',(-0.999986381951,5.218803814688E-03,0.)); +#305595 = DIRECTION('',(-5.218803814688E-03,-0.999986381951,0.)); +#305596 = ADVANCED_FACE('',(#305597),#305624,.T.); +#305597 = FACE_BOUND('',#305598,.F.); +#305598 = EDGE_LOOP('',(#305599,#305600,#305609,#305617)); +#305599 = ORIENTED_EDGE('',*,*,#305578,.T.); +#305600 = ORIENTED_EDGE('',*,*,#305601,.T.); +#305601 = EDGE_CURVE('',#305571,#305602,#305604,.T.); +#305602 = VERTEX_POINT('',#305603); +#305603 = CARTESIAN_POINT('',(151.701921,-113.859509,-3.5E-02)); +#305604 = CIRCLE('',#305605,0.100000456609); +#305605 = AXIS2_PLACEMENT_3D('',#305606,#305607,#305608); +#305606 = CARTESIAN_POINT('',(151.8,-113.84,-3.5E-02)); +#305607 = DIRECTION('',(-0.,0.,-1.)); +#305608 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#305609 = ORIENTED_EDGE('',*,*,#305610,.F.); +#305610 = EDGE_CURVE('',#305611,#305602,#305613,.T.); +#305611 = VERTEX_POINT('',#305612); +#305612 = CARTESIAN_POINT('',(151.701921,-113.859509,0.)); +#305613 = LINE('',#305614,#305615); +#305614 = CARTESIAN_POINT('',(151.701921,-113.859509,0.)); +#305615 = VECTOR('',#305616,1.); +#305616 = DIRECTION('',(0.,0.,-1.)); +#305617 = ORIENTED_EDGE('',*,*,#305618,.F.); +#305618 = EDGE_CURVE('',#305579,#305611,#305619,.T.); +#305619 = CIRCLE('',#305620,0.100000456609); +#305620 = AXIS2_PLACEMENT_3D('',#305621,#305622,#305623); +#305621 = CARTESIAN_POINT('',(151.8,-113.84,0.)); +#305622 = DIRECTION('',(-0.,0.,-1.)); +#305623 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#305624 = CYLINDRICAL_SURFACE('',#305625,0.100000456609); +#305625 = AXIS2_PLACEMENT_3D('',#305626,#305627,#305628); +#305626 = CARTESIAN_POINT('',(151.8,-113.84,0.)); +#305627 = DIRECTION('',(0.,-0.,1.)); +#305628 = DIRECTION('',(0.980785521645,-0.195089109205,-0.)); +#305629 = ADVANCED_FACE('',(#305630),#305655,.F.); +#305630 = FACE_BOUND('',#305631,.F.); +#305631 = EDGE_LOOP('',(#305632,#305633,#305641,#305649)); +#305632 = ORIENTED_EDGE('',*,*,#305610,.T.); +#305633 = ORIENTED_EDGE('',*,*,#305634,.T.); +#305634 = EDGE_CURVE('',#305602,#305635,#305637,.T.); +#305635 = VERTEX_POINT('',#305636); +#305636 = CARTESIAN_POINT('',(151.701921,-113.430491,-3.5E-02)); +#305637 = LINE('',#305638,#305639); +#305638 = CARTESIAN_POINT('',(151.701921,-113.859509,-3.5E-02)); +#305639 = VECTOR('',#305640,1.); +#305640 = DIRECTION('',(0.,1.,0.)); +#305641 = ORIENTED_EDGE('',*,*,#305642,.F.); +#305642 = EDGE_CURVE('',#305643,#305635,#305645,.T.); +#305643 = VERTEX_POINT('',#305644); +#305644 = CARTESIAN_POINT('',(151.701921,-113.430491,0.)); +#305645 = LINE('',#305646,#305647); +#305646 = CARTESIAN_POINT('',(151.701921,-113.430491,0.)); +#305647 = VECTOR('',#305648,1.); +#305648 = DIRECTION('',(0.,0.,-1.)); +#305649 = ORIENTED_EDGE('',*,*,#305650,.F.); +#305650 = EDGE_CURVE('',#305611,#305643,#305651,.T.); +#305651 = LINE('',#305652,#305653); +#305652 = CARTESIAN_POINT('',(151.701921,-113.859509,0.)); +#305653 = VECTOR('',#305654,1.); +#305654 = DIRECTION('',(0.,1.,0.)); +#305655 = PLANE('',#305656); +#305656 = AXIS2_PLACEMENT_3D('',#305657,#305658,#305659); +#305657 = CARTESIAN_POINT('',(151.701921,-113.859509,0.)); +#305658 = DIRECTION('',(1.,-0.,0.)); +#305659 = DIRECTION('',(0.,1.,0.)); +#305660 = ADVANCED_FACE('',(#305661),#305686,.F.); +#305661 = FACE_BOUND('',#305662,.F.); +#305662 = EDGE_LOOP('',(#305663,#305664,#305672,#305680)); +#305663 = ORIENTED_EDGE('',*,*,#305642,.T.); +#305664 = ORIENTED_EDGE('',*,*,#305665,.T.); +#305665 = EDGE_CURVE('',#305635,#305666,#305668,.T.); +#305666 = VERTEX_POINT('',#305667); +#305667 = CARTESIAN_POINT('',(151.716853,-113.394443,-3.5E-02)); +#305668 = LINE('',#305669,#305670); +#305669 = CARTESIAN_POINT('',(151.701921,-113.430491,-3.5E-02)); +#305670 = VECTOR('',#305671,1.); +#305671 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#305672 = ORIENTED_EDGE('',*,*,#305673,.F.); +#305673 = EDGE_CURVE('',#305674,#305666,#305676,.T.); +#305674 = VERTEX_POINT('',#305675); +#305675 = CARTESIAN_POINT('',(151.716853,-113.394443,0.)); +#305676 = LINE('',#305677,#305678); +#305677 = CARTESIAN_POINT('',(151.716853,-113.394443,0.)); +#305678 = VECTOR('',#305679,1.); +#305679 = DIRECTION('',(0.,0.,-1.)); +#305680 = ORIENTED_EDGE('',*,*,#305681,.F.); +#305681 = EDGE_CURVE('',#305643,#305674,#305682,.T.); +#305682 = LINE('',#305683,#305684); +#305683 = CARTESIAN_POINT('',(151.701921,-113.430491,0.)); +#305684 = VECTOR('',#305685,1.); +#305685 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#305686 = PLANE('',#305687); +#305687 = AXIS2_PLACEMENT_3D('',#305688,#305689,#305690); +#305688 = CARTESIAN_POINT('',(151.701921,-113.430491,0.)); +#305689 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#305690 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#305691 = ADVANCED_FACE('',(#305692),#305717,.F.); +#305692 = FACE_BOUND('',#305693,.F.); +#305693 = EDGE_LOOP('',(#305694,#305695,#305703,#305711)); +#305694 = ORIENTED_EDGE('',*,*,#305673,.T.); +#305695 = ORIENTED_EDGE('',*,*,#305696,.T.); +#305696 = EDGE_CURVE('',#305666,#305697,#305699,.T.); +#305697 = VERTEX_POINT('',#305698); +#305698 = CARTESIAN_POINT('',(152.480499,-112.628078,-3.5E-02)); +#305699 = LINE('',#305700,#305701); +#305700 = CARTESIAN_POINT('',(151.716853,-113.394443,-3.5E-02)); +#305701 = VECTOR('',#305702,1.); +#305702 = DIRECTION('',(0.705849059081,0.708362270166,0.)); +#305703 = ORIENTED_EDGE('',*,*,#305704,.F.); +#305704 = EDGE_CURVE('',#305705,#305697,#305707,.T.); +#305705 = VERTEX_POINT('',#305706); +#305706 = CARTESIAN_POINT('',(152.480499,-112.628078,0.)); +#305707 = LINE('',#305708,#305709); +#305708 = CARTESIAN_POINT('',(152.480499,-112.628078,0.)); +#305709 = VECTOR('',#305710,1.); +#305710 = DIRECTION('',(0.,0.,-1.)); +#305711 = ORIENTED_EDGE('',*,*,#305712,.F.); +#305712 = EDGE_CURVE('',#305674,#305705,#305713,.T.); +#305713 = LINE('',#305714,#305715); +#305714 = CARTESIAN_POINT('',(151.716853,-113.394443,0.)); +#305715 = VECTOR('',#305716,1.); +#305716 = DIRECTION('',(0.705849059081,0.708362270166,0.)); +#305717 = PLANE('',#305718); +#305718 = AXIS2_PLACEMENT_3D('',#305719,#305720,#305721); +#305719 = CARTESIAN_POINT('',(151.716853,-113.394443,0.)); +#305720 = DIRECTION('',(0.708362270166,-0.705849059081,0.)); +#305721 = DIRECTION('',(0.705849059081,0.708362270166,0.)); +#305722 = ADVANCED_FACE('',(#305723),#305748,.F.); +#305723 = FACE_BOUND('',#305724,.F.); +#305724 = EDGE_LOOP('',(#305725,#305726,#305734,#305742)); +#305725 = ORIENTED_EDGE('',*,*,#305704,.T.); +#305726 = ORIENTED_EDGE('',*,*,#305727,.T.); +#305727 = EDGE_CURVE('',#305697,#305728,#305730,.T.); +#305728 = VERTEX_POINT('',#305729); +#305729 = CARTESIAN_POINT('',(152.472836,-112.614805,-3.5E-02)); +#305730 = LINE('',#305731,#305732); +#305731 = CARTESIAN_POINT('',(152.480499,-112.628078,-3.5E-02)); +#305732 = VECTOR('',#305733,1.); +#305733 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#305734 = ORIENTED_EDGE('',*,*,#305735,.F.); +#305735 = EDGE_CURVE('',#305736,#305728,#305738,.T.); +#305736 = VERTEX_POINT('',#305737); +#305737 = CARTESIAN_POINT('',(152.472836,-112.614805,0.)); +#305738 = LINE('',#305739,#305740); +#305739 = CARTESIAN_POINT('',(152.472836,-112.614805,0.)); +#305740 = VECTOR('',#305741,1.); +#305741 = DIRECTION('',(0.,0.,-1.)); +#305742 = ORIENTED_EDGE('',*,*,#305743,.F.); +#305743 = EDGE_CURVE('',#305705,#305736,#305744,.T.); +#305744 = LINE('',#305745,#305746); +#305745 = CARTESIAN_POINT('',(152.480499,-112.628078,0.)); +#305746 = VECTOR('',#305747,1.); +#305747 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#305748 = PLANE('',#305749); +#305749 = AXIS2_PLACEMENT_3D('',#305750,#305751,#305752); +#305750 = CARTESIAN_POINT('',(152.480499,-112.628078,0.)); +#305751 = DIRECTION('',(0.866030210228,0.499991674903,0.)); +#305752 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#305753 = ADVANCED_FACE('',(#305754),#305781,.T.); +#305754 = FACE_BOUND('',#305755,.F.); +#305755 = EDGE_LOOP('',(#305756,#305757,#305766,#305774)); +#305756 = ORIENTED_EDGE('',*,*,#305735,.T.); +#305757 = ORIENTED_EDGE('',*,*,#305758,.T.); +#305758 = EDGE_CURVE('',#305728,#305759,#305761,.T.); +#305759 = VERTEX_POINT('',#305760); +#305760 = CARTESIAN_POINT('',(152.635195,-112.777164,-3.5E-02)); +#305761 = CIRCLE('',#305762,0.300000118202); +#305762 = AXIS2_PLACEMENT_3D('',#305763,#305764,#305765); +#305763 = CARTESIAN_POINT('',(152.75,-112.5,-3.5E-02)); +#305764 = DIRECTION('',(0.,0.,-1.)); +#305765 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#305766 = ORIENTED_EDGE('',*,*,#305767,.F.); +#305767 = EDGE_CURVE('',#305768,#305759,#305770,.T.); +#305768 = VERTEX_POINT('',#305769); +#305769 = CARTESIAN_POINT('',(152.635195,-112.777164,0.)); +#305770 = LINE('',#305771,#305772); +#305771 = CARTESIAN_POINT('',(152.635195,-112.777164,0.)); +#305772 = VECTOR('',#305773,1.); +#305773 = DIRECTION('',(0.,0.,-1.)); +#305774 = ORIENTED_EDGE('',*,*,#305775,.F.); +#305775 = EDGE_CURVE('',#305736,#305768,#305776,.T.); +#305776 = CIRCLE('',#305777,0.300000118202); +#305777 = AXIS2_PLACEMENT_3D('',#305778,#305779,#305780); +#305778 = CARTESIAN_POINT('',(152.75,-112.5,0.)); +#305779 = DIRECTION('',(0.,0.,-1.)); +#305780 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#305781 = CYLINDRICAL_SURFACE('',#305782,0.300000118202); +#305782 = AXIS2_PLACEMENT_3D('',#305783,#305784,#305785); +#305783 = CARTESIAN_POINT('',(152.75,-112.5,0.)); +#305784 = DIRECTION('',(-0.,-0.,1.)); +#305785 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#305786 = ADVANCED_FACE('',(#305787),#305803,.F.); +#305787 = FACE_BOUND('',#305788,.F.); +#305788 = EDGE_LOOP('',(#305789,#305790,#305796,#305797)); +#305789 = ORIENTED_EDGE('',*,*,#305767,.T.); +#305790 = ORIENTED_EDGE('',*,*,#305791,.T.); +#305791 = EDGE_CURVE('',#305759,#305532,#305792,.T.); +#305792 = LINE('',#305793,#305794); +#305793 = CARTESIAN_POINT('',(152.635195,-112.777164,-3.5E-02)); +#305794 = VECTOR('',#305795,1.); +#305795 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#305796 = ORIENTED_EDGE('',*,*,#305529,.F.); +#305797 = ORIENTED_EDGE('',*,*,#305798,.F.); +#305798 = EDGE_CURVE('',#305768,#305530,#305799,.T.); +#305799 = LINE('',#305800,#305801); +#305800 = CARTESIAN_POINT('',(152.635195,-112.777164,0.)); +#305801 = VECTOR('',#305802,1.); +#305802 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#305803 = PLANE('',#305804); +#305804 = AXIS2_PLACEMENT_3D('',#305805,#305806,#305807); +#305805 = CARTESIAN_POINT('',(152.635195,-112.777164,0.)); +#305806 = DIRECTION('',(0.500012356405,0.866018269693,0.)); +#305807 = DIRECTION('',(-0.866018269693,0.500012356405,0.)); +#305808 = ADVANCED_FACE('',(#305809),#305836,.F.); +#305809 = FACE_BOUND('',#305810,.F.); +#305810 = EDGE_LOOP('',(#305811,#305821,#305828,#305829)); +#305811 = ORIENTED_EDGE('',*,*,#305812,.T.); +#305812 = EDGE_CURVE('',#305813,#305815,#305817,.T.); +#305813 = VERTEX_POINT('',#305814); +#305814 = CARTESIAN_POINT('',(152.887255,-112.5,0.)); +#305815 = VERTEX_POINT('',#305816); +#305816 = CARTESIAN_POINT('',(152.887255,-112.5,-3.5E-02)); +#305817 = LINE('',#305818,#305819); +#305818 = CARTESIAN_POINT('',(152.887255,-112.5,0.)); +#305819 = VECTOR('',#305820,1.); +#305820 = DIRECTION('',(0.,0.,-1.)); +#305821 = ORIENTED_EDGE('',*,*,#305822,.T.); +#305822 = EDGE_CURVE('',#305815,#305815,#305823,.T.); +#305823 = CIRCLE('',#305824,0.137255); +#305824 = AXIS2_PLACEMENT_3D('',#305825,#305826,#305827); +#305825 = CARTESIAN_POINT('',(152.75,-112.5,-3.5E-02)); +#305826 = DIRECTION('',(0.,0.,1.)); +#305827 = DIRECTION('',(1.,0.,-0.)); +#305828 = ORIENTED_EDGE('',*,*,#305812,.F.); +#305829 = ORIENTED_EDGE('',*,*,#305830,.F.); +#305830 = EDGE_CURVE('',#305813,#305813,#305831,.T.); +#305831 = CIRCLE('',#305832,0.137255); +#305832 = AXIS2_PLACEMENT_3D('',#305833,#305834,#305835); +#305833 = CARTESIAN_POINT('',(152.75,-112.5,0.)); +#305834 = DIRECTION('',(0.,0.,1.)); +#305835 = DIRECTION('',(1.,0.,-0.)); +#305836 = CYLINDRICAL_SURFACE('',#305837,0.137255); +#305837 = AXIS2_PLACEMENT_3D('',#305838,#305839,#305840); +#305838 = CARTESIAN_POINT('',(152.75,-112.5,0.)); +#305839 = DIRECTION('',(0.,0.,1.)); +#305840 = DIRECTION('',(1.,0.,-0.)); +#305841 = ADVANCED_FACE('',(#305842,#305853),#305856,.F.); +#305842 = FACE_BOUND('',#305843,.F.); +#305843 = EDGE_LOOP('',(#305844,#305845,#305846,#305847,#305848,#305849, + #305850,#305851,#305852)); +#305844 = ORIENTED_EDGE('',*,*,#305555,.T.); +#305845 = ORIENTED_EDGE('',*,*,#305586,.T.); +#305846 = ORIENTED_EDGE('',*,*,#305618,.T.); +#305847 = ORIENTED_EDGE('',*,*,#305650,.T.); +#305848 = ORIENTED_EDGE('',*,*,#305681,.T.); +#305849 = ORIENTED_EDGE('',*,*,#305712,.T.); +#305850 = ORIENTED_EDGE('',*,*,#305743,.T.); +#305851 = ORIENTED_EDGE('',*,*,#305775,.T.); +#305852 = ORIENTED_EDGE('',*,*,#305798,.T.); +#305853 = FACE_BOUND('',#305854,.F.); +#305854 = EDGE_LOOP('',(#305855)); +#305855 = ORIENTED_EDGE('',*,*,#305830,.T.); +#305856 = PLANE('',#305857); +#305857 = AXIS2_PLACEMENT_3D('',#305858,#305859,#305860); +#305858 = CARTESIAN_POINT('',(0.,0.,0.)); +#305859 = DIRECTION('',(-0.,-0.,-1.)); +#305860 = DIRECTION('',(-1.,0.,0.)); +#305861 = ADVANCED_FACE('',(#305862,#305873),#305876,.T.); +#305862 = FACE_BOUND('',#305863,.T.); +#305863 = EDGE_LOOP('',(#305864,#305865,#305866,#305867,#305868,#305869, + #305870,#305871,#305872)); +#305864 = ORIENTED_EDGE('',*,*,#305539,.T.); +#305865 = ORIENTED_EDGE('',*,*,#305570,.T.); +#305866 = ORIENTED_EDGE('',*,*,#305601,.T.); +#305867 = ORIENTED_EDGE('',*,*,#305634,.T.); +#305868 = ORIENTED_EDGE('',*,*,#305665,.T.); +#305869 = ORIENTED_EDGE('',*,*,#305696,.T.); +#305870 = ORIENTED_EDGE('',*,*,#305727,.T.); +#305871 = ORIENTED_EDGE('',*,*,#305758,.T.); +#305872 = ORIENTED_EDGE('',*,*,#305791,.T.); +#305873 = FACE_BOUND('',#305874,.T.); +#305874 = EDGE_LOOP('',(#305875)); +#305875 = ORIENTED_EDGE('',*,*,#305822,.T.); +#305876 = PLANE('',#305877); +#305877 = AXIS2_PLACEMENT_3D('',#305878,#305879,#305880); +#305878 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#305879 = DIRECTION('',(-0.,-0.,-1.)); +#305880 = DIRECTION('',(-1.,0.,0.)); +#305881 = MANIFOLD_SOLID_BREP('',#305882); +#305882 = CLOSED_SHELL('',(#305883,#305916,#305949,#305961)); +#305883 = ADVANCED_FACE('',(#305884),#305911,.T.); +#305884 = FACE_BOUND('',#305885,.T.); +#305885 = EDGE_LOOP('',(#305886,#305896,#305903,#305904)); +#305886 = ORIENTED_EDGE('',*,*,#305887,.T.); +#305887 = EDGE_CURVE('',#305888,#305890,#305892,.T.); +#305888 = VERTEX_POINT('',#305889); +#305889 = CARTESIAN_POINT('',(142.55,-112.5,0.)); +#305890 = VERTEX_POINT('',#305891); +#305891 = CARTESIAN_POINT('',(142.55,-112.5,-3.5E-02)); +#305892 = LINE('',#305893,#305894); +#305893 = CARTESIAN_POINT('',(142.55,-112.5,0.)); +#305894 = VECTOR('',#305895,1.); +#305895 = DIRECTION('',(0.,0.,-1.)); +#305896 = ORIENTED_EDGE('',*,*,#305897,.T.); +#305897 = EDGE_CURVE('',#305890,#305890,#305898,.T.); +#305898 = CIRCLE('',#305899,0.3); +#305899 = AXIS2_PLACEMENT_3D('',#305900,#305901,#305902); +#305900 = CARTESIAN_POINT('',(142.25,-112.5,-3.5E-02)); +#305901 = DIRECTION('',(0.,0.,1.)); +#305902 = DIRECTION('',(1.,0.,-0.)); +#305903 = ORIENTED_EDGE('',*,*,#305887,.F.); +#305904 = ORIENTED_EDGE('',*,*,#305905,.F.); +#305905 = EDGE_CURVE('',#305888,#305888,#305906,.T.); +#305906 = CIRCLE('',#305907,0.3); +#305907 = AXIS2_PLACEMENT_3D('',#305908,#305909,#305910); +#305908 = CARTESIAN_POINT('',(142.25,-112.5,0.)); +#305909 = DIRECTION('',(0.,0.,1.)); +#305910 = DIRECTION('',(1.,0.,-0.)); +#305911 = CYLINDRICAL_SURFACE('',#305912,0.3); +#305912 = AXIS2_PLACEMENT_3D('',#305913,#305914,#305915); +#305913 = CARTESIAN_POINT('',(142.25,-112.5,0.)); +#305914 = DIRECTION('',(0.,0.,1.)); +#305915 = DIRECTION('',(1.,0.,-0.)); +#305916 = ADVANCED_FACE('',(#305917),#305944,.F.); +#305917 = FACE_BOUND('',#305918,.F.); +#305918 = EDGE_LOOP('',(#305919,#305929,#305936,#305937)); +#305919 = ORIENTED_EDGE('',*,*,#305920,.T.); +#305920 = EDGE_CURVE('',#305921,#305923,#305925,.T.); +#305921 = VERTEX_POINT('',#305922); +#305922 = CARTESIAN_POINT('',(142.387255,-112.5,0.)); +#305923 = VERTEX_POINT('',#305924); +#305924 = CARTESIAN_POINT('',(142.387255,-112.5,-3.5E-02)); +#305925 = LINE('',#305926,#305927); +#305926 = CARTESIAN_POINT('',(142.387255,-112.5,0.)); +#305927 = VECTOR('',#305928,1.); +#305928 = DIRECTION('',(0.,0.,-1.)); +#305929 = ORIENTED_EDGE('',*,*,#305930,.T.); +#305930 = EDGE_CURVE('',#305923,#305923,#305931,.T.); +#305931 = CIRCLE('',#305932,0.137255); +#305932 = AXIS2_PLACEMENT_3D('',#305933,#305934,#305935); +#305933 = CARTESIAN_POINT('',(142.25,-112.5,-3.5E-02)); +#305934 = DIRECTION('',(0.,0.,1.)); +#305935 = DIRECTION('',(1.,0.,-0.)); +#305936 = ORIENTED_EDGE('',*,*,#305920,.F.); +#305937 = ORIENTED_EDGE('',*,*,#305938,.F.); +#305938 = EDGE_CURVE('',#305921,#305921,#305939,.T.); +#305939 = CIRCLE('',#305940,0.137255); +#305940 = AXIS2_PLACEMENT_3D('',#305941,#305942,#305943); +#305941 = CARTESIAN_POINT('',(142.25,-112.5,0.)); +#305942 = DIRECTION('',(0.,0.,1.)); +#305943 = DIRECTION('',(1.,0.,-0.)); +#305944 = CYLINDRICAL_SURFACE('',#305945,0.137255); +#305945 = AXIS2_PLACEMENT_3D('',#305946,#305947,#305948); +#305946 = CARTESIAN_POINT('',(142.25,-112.5,0.)); +#305947 = DIRECTION('',(0.,0.,1.)); +#305948 = DIRECTION('',(1.,0.,-0.)); +#305949 = ADVANCED_FACE('',(#305950,#305953),#305956,.F.); +#305950 = FACE_BOUND('',#305951,.T.); +#305951 = EDGE_LOOP('',(#305952)); +#305952 = ORIENTED_EDGE('',*,*,#305905,.T.); +#305953 = FACE_BOUND('',#305954,.F.); +#305954 = EDGE_LOOP('',(#305955)); +#305955 = ORIENTED_EDGE('',*,*,#305938,.T.); +#305956 = PLANE('',#305957); +#305957 = AXIS2_PLACEMENT_3D('',#305958,#305959,#305960); +#305958 = CARTESIAN_POINT('',(0.,0.,0.)); +#305959 = DIRECTION('',(-0.,-0.,-1.)); +#305960 = DIRECTION('',(-1.,0.,0.)); +#305961 = ADVANCED_FACE('',(#305962,#305965),#305968,.T.); +#305962 = FACE_BOUND('',#305963,.F.); +#305963 = EDGE_LOOP('',(#305964)); +#305964 = ORIENTED_EDGE('',*,*,#305897,.T.); +#305965 = FACE_BOUND('',#305966,.T.); +#305966 = EDGE_LOOP('',(#305967)); +#305967 = ORIENTED_EDGE('',*,*,#305930,.T.); +#305968 = PLANE('',#305969); +#305969 = AXIS2_PLACEMENT_3D('',#305970,#305971,#305972); +#305970 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#305971 = DIRECTION('',(-0.,-0.,-1.)); +#305972 = DIRECTION('',(-1.,0.,0.)); +#305973 = MANIFOLD_SOLID_BREP('',#305974); +#305974 = CLOSED_SHELL('',(#305975,#306017,#306048,#306079,#306110, + #306141,#306174,#306205,#306236,#306267,#306298,#306320,#306353, + #306375)); +#305975 = ADVANCED_FACE('',(#305976),#306012,.T.); +#305976 = FACE_BOUND('',#305977,.F.); +#305977 = EDGE_LOOP('',(#305978,#305988,#305997,#306005)); +#305978 = ORIENTED_EDGE('',*,*,#305979,.T.); +#305979 = EDGE_CURVE('',#305980,#305982,#305984,.T.); +#305980 = VERTEX_POINT('',#305981); +#305981 = CARTESIAN_POINT('',(121.941664,-110.82528,0.)); +#305982 = VERTEX_POINT('',#305983); +#305983 = CARTESIAN_POINT('',(121.941664,-110.82528,-3.5E-02)); +#305984 = LINE('',#305985,#305986); +#305985 = CARTESIAN_POINT('',(121.941664,-110.82528,0.)); +#305986 = VECTOR('',#305987,1.); +#305987 = DIRECTION('',(0.,0.,-1.)); +#305988 = ORIENTED_EDGE('',*,*,#305989,.T.); +#305989 = EDGE_CURVE('',#305982,#305990,#305992,.T.); +#305990 = VERTEX_POINT('',#305991); +#305991 = CARTESIAN_POINT('',(122.172118,-110.920736,-3.5E-02)); +#305992 = CIRCLE('',#305993,0.150000415027); +#305993 = AXIS2_PLACEMENT_3D('',#305994,#305995,#305996); +#305994 = CARTESIAN_POINT('',(122.025,-110.9500006302,-3.5E-02)); +#305995 = DIRECTION('',(0.,0.,-1.)); +#305996 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#305997 = ORIENTED_EDGE('',*,*,#305998,.F.); +#305998 = EDGE_CURVE('',#305999,#305990,#306001,.T.); +#305999 = VERTEX_POINT('',#306000); +#306000 = CARTESIAN_POINT('',(122.172118,-110.920736,0.)); +#306001 = LINE('',#306002,#306003); +#306002 = CARTESIAN_POINT('',(122.172118,-110.920736,0.)); +#306003 = VECTOR('',#306004,1.); +#306004 = DIRECTION('',(0.,0.,-1.)); +#306005 = ORIENTED_EDGE('',*,*,#306006,.F.); +#306006 = EDGE_CURVE('',#305980,#305999,#306007,.T.); +#306007 = CIRCLE('',#306008,0.150000415027); +#306008 = AXIS2_PLACEMENT_3D('',#306009,#306010,#306011); +#306009 = CARTESIAN_POINT('',(122.025,-110.9500006302,0.)); +#306010 = DIRECTION('',(0.,0.,-1.)); +#306011 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#306012 = CYLINDRICAL_SURFACE('',#306013,0.150000415027); +#306013 = AXIS2_PLACEMENT_3D('',#306014,#306015,#306016); +#306014 = CARTESIAN_POINT('',(122.025,-110.9500006302,0.)); +#306015 = DIRECTION('',(-0.,-0.,1.)); +#306016 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#306017 = ADVANCED_FACE('',(#306018),#306043,.F.); +#306018 = FACE_BOUND('',#306019,.F.); +#306019 = EDGE_LOOP('',(#306020,#306021,#306029,#306037)); +#306020 = ORIENTED_EDGE('',*,*,#305998,.T.); +#306021 = ORIENTED_EDGE('',*,*,#306022,.T.); +#306022 = EDGE_CURVE('',#305990,#306023,#306025,.T.); +#306023 = VERTEX_POINT('',#306024); +#306024 = CARTESIAN_POINT('',(122.172118,-111.504263,-3.5E-02)); +#306025 = LINE('',#306026,#306027); +#306026 = CARTESIAN_POINT('',(122.172118,-110.920736,-3.5E-02)); +#306027 = VECTOR('',#306028,1.); +#306028 = DIRECTION('',(0.,-1.,0.)); +#306029 = ORIENTED_EDGE('',*,*,#306030,.F.); +#306030 = EDGE_CURVE('',#306031,#306023,#306033,.T.); +#306031 = VERTEX_POINT('',#306032); +#306032 = CARTESIAN_POINT('',(122.172118,-111.504263,0.)); +#306033 = LINE('',#306034,#306035); +#306034 = CARTESIAN_POINT('',(122.172118,-111.504263,0.)); +#306035 = VECTOR('',#306036,1.); +#306036 = DIRECTION('',(0.,0.,-1.)); +#306037 = ORIENTED_EDGE('',*,*,#306038,.F.); +#306038 = EDGE_CURVE('',#305999,#306031,#306039,.T.); +#306039 = LINE('',#306040,#306041); +#306040 = CARTESIAN_POINT('',(122.172118,-110.920736,0.)); +#306041 = VECTOR('',#306042,1.); +#306042 = DIRECTION('',(0.,-1.,0.)); +#306043 = PLANE('',#306044); +#306044 = AXIS2_PLACEMENT_3D('',#306045,#306046,#306047); +#306045 = CARTESIAN_POINT('',(122.172118,-110.920736,0.)); +#306046 = DIRECTION('',(-1.,-0.,-0.)); +#306047 = DIRECTION('',(0.,-1.,0.)); +#306048 = ADVANCED_FACE('',(#306049),#306074,.F.); +#306049 = FACE_BOUND('',#306050,.F.); +#306050 = EDGE_LOOP('',(#306051,#306052,#306060,#306068)); +#306051 = ORIENTED_EDGE('',*,*,#306030,.T.); +#306052 = ORIENTED_EDGE('',*,*,#306053,.T.); +#306053 = EDGE_CURVE('',#306023,#306054,#306056,.T.); +#306054 = VERTEX_POINT('',#306055); +#306055 = CARTESIAN_POINT('',(122.149721,-111.558335,-3.5E-02)); +#306056 = LINE('',#306057,#306058); +#306057 = CARTESIAN_POINT('',(122.172118,-111.504263,-3.5E-02)); +#306058 = VECTOR('',#306059,1.); +#306059 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306060 = ORIENTED_EDGE('',*,*,#306061,.F.); +#306061 = EDGE_CURVE('',#306062,#306054,#306064,.T.); +#306062 = VERTEX_POINT('',#306063); +#306063 = CARTESIAN_POINT('',(122.149721,-111.558335,0.)); +#306064 = LINE('',#306065,#306066); +#306065 = CARTESIAN_POINT('',(122.149721,-111.558335,0.)); +#306066 = VECTOR('',#306067,1.); +#306067 = DIRECTION('',(0.,0.,-1.)); +#306068 = ORIENTED_EDGE('',*,*,#306069,.F.); +#306069 = EDGE_CURVE('',#306031,#306062,#306070,.T.); +#306070 = LINE('',#306071,#306072); +#306071 = CARTESIAN_POINT('',(122.172118,-111.504263,0.)); +#306072 = VECTOR('',#306073,1.); +#306073 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306074 = PLANE('',#306075); +#306075 = AXIS2_PLACEMENT_3D('',#306076,#306077,#306078); +#306076 = CARTESIAN_POINT('',(122.172118,-111.504263,0.)); +#306077 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#306078 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306079 = ADVANCED_FACE('',(#306080),#306105,.F.); +#306080 = FACE_BOUND('',#306081,.F.); +#306081 = EDGE_LOOP('',(#306082,#306083,#306091,#306099)); +#306082 = ORIENTED_EDGE('',*,*,#306061,.T.); +#306083 = ORIENTED_EDGE('',*,*,#306084,.T.); +#306084 = EDGE_CURVE('',#306054,#306085,#306087,.T.); +#306085 = VERTEX_POINT('',#306086); +#306086 = CARTESIAN_POINT('',(121.787682,-111.924449,-3.5E-02)); +#306087 = LINE('',#306088,#306089); +#306088 = CARTESIAN_POINT('',(122.149721,-111.558335,-3.5E-02)); +#306089 = VECTOR('',#306090,1.); +#306090 = DIRECTION('',(-0.703138552457,-0.711052864454,0.)); +#306091 = ORIENTED_EDGE('',*,*,#306092,.F.); +#306092 = EDGE_CURVE('',#306093,#306085,#306095,.T.); +#306093 = VERTEX_POINT('',#306094); +#306094 = CARTESIAN_POINT('',(121.787682,-111.924449,0.)); +#306095 = LINE('',#306096,#306097); +#306096 = CARTESIAN_POINT('',(121.787682,-111.924449,0.)); +#306097 = VECTOR('',#306098,1.); +#306098 = DIRECTION('',(0.,0.,-1.)); +#306099 = ORIENTED_EDGE('',*,*,#306100,.F.); +#306100 = EDGE_CURVE('',#306062,#306093,#306101,.T.); +#306101 = LINE('',#306102,#306103); +#306102 = CARTESIAN_POINT('',(122.149721,-111.558335,0.)); +#306103 = VECTOR('',#306104,1.); +#306104 = DIRECTION('',(-0.703138552457,-0.711052864454,0.)); +#306105 = PLANE('',#306106); +#306106 = AXIS2_PLACEMENT_3D('',#306107,#306108,#306109); +#306107 = CARTESIAN_POINT('',(122.149721,-111.558335,0.)); +#306108 = DIRECTION('',(-0.711052864454,0.703138552457,0.)); +#306109 = DIRECTION('',(-0.703138552457,-0.711052864454,0.)); +#306110 = ADVANCED_FACE('',(#306111),#306136,.F.); +#306111 = FACE_BOUND('',#306112,.F.); +#306112 = EDGE_LOOP('',(#306113,#306114,#306122,#306130)); +#306113 = ORIENTED_EDGE('',*,*,#306092,.T.); +#306114 = ORIENTED_EDGE('',*,*,#306115,.T.); +#306115 = EDGE_CURVE('',#306085,#306116,#306118,.T.); +#306116 = VERTEX_POINT('',#306117); +#306117 = CARTESIAN_POINT('',(121.797433,-111.960842,-3.5E-02)); +#306118 = LINE('',#306119,#306120); +#306119 = CARTESIAN_POINT('',(121.787682,-111.924449,-3.5E-02)); +#306120 = VECTOR('',#306121,1.); +#306121 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306122 = ORIENTED_EDGE('',*,*,#306123,.F.); +#306123 = EDGE_CURVE('',#306124,#306116,#306126,.T.); +#306124 = VERTEX_POINT('',#306125); +#306125 = CARTESIAN_POINT('',(121.797433,-111.960842,0.)); +#306126 = LINE('',#306127,#306128); +#306127 = CARTESIAN_POINT('',(121.797433,-111.960842,0.)); +#306128 = VECTOR('',#306129,1.); +#306129 = DIRECTION('',(0.,0.,-1.)); +#306130 = ORIENTED_EDGE('',*,*,#306131,.F.); +#306131 = EDGE_CURVE('',#306093,#306124,#306132,.T.); +#306132 = LINE('',#306133,#306134); +#306133 = CARTESIAN_POINT('',(121.787682,-111.924449,0.)); +#306134 = VECTOR('',#306135,1.); +#306135 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306136 = PLANE('',#306137); +#306137 = AXIS2_PLACEMENT_3D('',#306138,#306139,#306140); +#306138 = CARTESIAN_POINT('',(121.787682,-111.924449,0.)); +#306139 = DIRECTION('',(-0.96592897777,-0.25880728333,-0.)); +#306140 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306141 = ADVANCED_FACE('',(#306142),#306169,.T.); +#306142 = FACE_BOUND('',#306143,.F.); +#306143 = EDGE_LOOP('',(#306144,#306145,#306154,#306162)); +#306144 = ORIENTED_EDGE('',*,*,#306123,.T.); +#306145 = ORIENTED_EDGE('',*,*,#306146,.T.); +#306146 = EDGE_CURVE('',#306116,#306147,#306149,.T.); +#306147 = VERTEX_POINT('',#306148); +#306148 = CARTESIAN_POINT('',(121.539158,-111.702567,-3.5E-02)); +#306149 = CIRCLE('',#306150,0.299999641111); +#306150 = AXIS2_PLACEMENT_3D('',#306151,#306152,#306153); +#306151 = CARTESIAN_POINT('',(121.49999993135,-112.0000000686,-3.5E-02) + ); +#306152 = DIRECTION('',(0.,0.,-1.)); +#306153 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306154 = ORIENTED_EDGE('',*,*,#306155,.F.); +#306155 = EDGE_CURVE('',#306156,#306147,#306158,.T.); +#306156 = VERTEX_POINT('',#306157); +#306157 = CARTESIAN_POINT('',(121.539158,-111.702567,0.)); +#306158 = LINE('',#306159,#306160); +#306159 = CARTESIAN_POINT('',(121.539158,-111.702567,0.)); +#306160 = VECTOR('',#306161,1.); +#306161 = DIRECTION('',(0.,0.,-1.)); +#306162 = ORIENTED_EDGE('',*,*,#306163,.F.); +#306163 = EDGE_CURVE('',#306124,#306156,#306164,.T.); +#306164 = CIRCLE('',#306165,0.299999641111); +#306165 = AXIS2_PLACEMENT_3D('',#306166,#306167,#306168); +#306166 = CARTESIAN_POINT('',(121.49999993135,-112.0000000686,0.)); +#306167 = DIRECTION('',(0.,0.,-1.)); +#306168 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306169 = CYLINDRICAL_SURFACE('',#306170,0.299999641111); +#306170 = AXIS2_PLACEMENT_3D('',#306171,#306172,#306173); +#306171 = CARTESIAN_POINT('',(121.49999993135,-112.0000000686,0.)); +#306172 = DIRECTION('',(-0.,-0.,1.)); +#306173 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306174 = ADVANCED_FACE('',(#306175),#306200,.F.); +#306175 = FACE_BOUND('',#306176,.F.); +#306176 = EDGE_LOOP('',(#306177,#306178,#306186,#306194)); +#306177 = ORIENTED_EDGE('',*,*,#306155,.T.); +#306178 = ORIENTED_EDGE('',*,*,#306179,.T.); +#306179 = EDGE_CURVE('',#306147,#306180,#306182,.T.); +#306180 = VERTEX_POINT('',#306181); +#306181 = CARTESIAN_POINT('',(121.57555,-111.712317,-3.5E-02)); +#306182 = LINE('',#306183,#306184); +#306183 = CARTESIAN_POINT('',(121.539158,-111.702567,-3.5E-02)); +#306184 = VECTOR('',#306185,1.); +#306185 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306186 = ORIENTED_EDGE('',*,*,#306187,.F.); +#306187 = EDGE_CURVE('',#306188,#306180,#306190,.T.); +#306188 = VERTEX_POINT('',#306189); +#306189 = CARTESIAN_POINT('',(121.57555,-111.712317,0.)); +#306190 = LINE('',#306191,#306192); +#306191 = CARTESIAN_POINT('',(121.57555,-111.712317,0.)); +#306192 = VECTOR('',#306193,1.); +#306193 = DIRECTION('',(0.,0.,-1.)); +#306194 = ORIENTED_EDGE('',*,*,#306195,.F.); +#306195 = EDGE_CURVE('',#306156,#306188,#306196,.T.); +#306196 = LINE('',#306197,#306198); +#306197 = CARTESIAN_POINT('',(121.539158,-111.702567,0.)); +#306198 = VECTOR('',#306199,1.); +#306199 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306200 = PLANE('',#306201); +#306201 = AXIS2_PLACEMENT_3D('',#306202,#306203,#306204); +#306202 = CARTESIAN_POINT('',(121.539158,-111.702567,0.)); +#306203 = DIRECTION('',(-0.258789153994,-0.965933835092,-0.)); +#306204 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306205 = ADVANCED_FACE('',(#306206),#306231,.F.); +#306206 = FACE_BOUND('',#306207,.F.); +#306207 = EDGE_LOOP('',(#306208,#306209,#306217,#306225)); +#306208 = ORIENTED_EDGE('',*,*,#306187,.T.); +#306209 = ORIENTED_EDGE('',*,*,#306210,.T.); +#306210 = EDGE_CURVE('',#306180,#306211,#306213,.T.); +#306211 = VERTEX_POINT('',#306212); +#306212 = CARTESIAN_POINT('',(121.875,-111.412868,-3.5E-02)); +#306213 = LINE('',#306214,#306215); +#306214 = CARTESIAN_POINT('',(121.57555,-111.712317,-3.5E-02)); +#306215 = VECTOR('',#306216,1.); +#306216 = DIRECTION('',(0.707107961863,0.707105600508,0.)); +#306217 = ORIENTED_EDGE('',*,*,#306218,.F.); +#306218 = EDGE_CURVE('',#306219,#306211,#306221,.T.); +#306219 = VERTEX_POINT('',#306220); +#306220 = CARTESIAN_POINT('',(121.875,-111.412868,0.)); +#306221 = LINE('',#306222,#306223); +#306222 = CARTESIAN_POINT('',(121.875,-111.412868,0.)); +#306223 = VECTOR('',#306224,1.); +#306224 = DIRECTION('',(0.,0.,-1.)); +#306225 = ORIENTED_EDGE('',*,*,#306226,.F.); +#306226 = EDGE_CURVE('',#306188,#306219,#306227,.T.); +#306227 = LINE('',#306228,#306229); +#306228 = CARTESIAN_POINT('',(121.57555,-111.712317,0.)); +#306229 = VECTOR('',#306230,1.); +#306230 = DIRECTION('',(0.707107961863,0.707105600508,0.)); +#306231 = PLANE('',#306232); +#306232 = AXIS2_PLACEMENT_3D('',#306233,#306234,#306235); +#306233 = CARTESIAN_POINT('',(121.57555,-111.712317,0.)); +#306234 = DIRECTION('',(0.707105600508,-0.707107961863,0.)); +#306235 = DIRECTION('',(0.707107961863,0.707105600508,0.)); +#306236 = ADVANCED_FACE('',(#306237),#306262,.F.); +#306237 = FACE_BOUND('',#306238,.F.); +#306238 = EDGE_LOOP('',(#306239,#306240,#306248,#306256)); +#306239 = ORIENTED_EDGE('',*,*,#306218,.T.); +#306240 = ORIENTED_EDGE('',*,*,#306241,.T.); +#306241 = EDGE_CURVE('',#306211,#306242,#306244,.T.); +#306242 = VERTEX_POINT('',#306243); +#306243 = CARTESIAN_POINT('',(121.877882,-110.920736,-3.5E-02)); +#306244 = LINE('',#306245,#306246); +#306245 = CARTESIAN_POINT('',(121.875,-111.412868,-3.5E-02)); +#306246 = VECTOR('',#306247,1.); +#306247 = DIRECTION('',(5.856052000004E-03,0.99998285318,0.)); +#306248 = ORIENTED_EDGE('',*,*,#306249,.F.); +#306249 = EDGE_CURVE('',#306250,#306242,#306252,.T.); +#306250 = VERTEX_POINT('',#306251); +#306251 = CARTESIAN_POINT('',(121.877882,-110.920736,0.)); +#306252 = LINE('',#306253,#306254); +#306253 = CARTESIAN_POINT('',(121.877882,-110.920736,0.)); +#306254 = VECTOR('',#306255,1.); +#306255 = DIRECTION('',(0.,0.,-1.)); +#306256 = ORIENTED_EDGE('',*,*,#306257,.F.); +#306257 = EDGE_CURVE('',#306219,#306250,#306258,.T.); +#306258 = LINE('',#306259,#306260); +#306259 = CARTESIAN_POINT('',(121.875,-111.412868,0.)); +#306260 = VECTOR('',#306261,1.); +#306261 = DIRECTION('',(5.856052000004E-03,0.99998285318,0.)); +#306262 = PLANE('',#306263); +#306263 = AXIS2_PLACEMENT_3D('',#306264,#306265,#306266); +#306264 = CARTESIAN_POINT('',(121.875,-111.412868,0.)); +#306265 = DIRECTION('',(0.99998285318,-5.856052000004E-03,0.)); +#306266 = DIRECTION('',(5.856052000004E-03,0.99998285318,0.)); +#306267 = ADVANCED_FACE('',(#306268),#306293,.F.); +#306268 = FACE_BOUND('',#306269,.F.); +#306269 = EDGE_LOOP('',(#306270,#306271,#306279,#306287)); +#306270 = ORIENTED_EDGE('',*,*,#306249,.T.); +#306271 = ORIENTED_EDGE('',*,*,#306272,.T.); +#306272 = EDGE_CURVE('',#306242,#306273,#306275,.T.); +#306273 = VERTEX_POINT('',#306274); +#306274 = CARTESIAN_POINT('',(121.90028,-110.866664,-3.5E-02)); +#306275 = LINE('',#306276,#306277); +#306276 = CARTESIAN_POINT('',(121.877882,-110.920736,-3.5E-02)); +#306277 = VECTOR('',#306278,1.); +#306278 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306279 = ORIENTED_EDGE('',*,*,#306280,.F.); +#306280 = EDGE_CURVE('',#306281,#306273,#306283,.T.); +#306281 = VERTEX_POINT('',#306282); +#306282 = CARTESIAN_POINT('',(121.90028,-110.866664,0.)); +#306283 = LINE('',#306284,#306285); +#306284 = CARTESIAN_POINT('',(121.90028,-110.866664,0.)); +#306285 = VECTOR('',#306286,1.); +#306286 = DIRECTION('',(0.,0.,-1.)); +#306287 = ORIENTED_EDGE('',*,*,#306288,.F.); +#306288 = EDGE_CURVE('',#306250,#306281,#306289,.T.); +#306289 = LINE('',#306290,#306291); +#306290 = CARTESIAN_POINT('',(121.877882,-110.920736,0.)); +#306291 = VECTOR('',#306292,1.); +#306292 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306293 = PLANE('',#306294); +#306294 = AXIS2_PLACEMENT_3D('',#306295,#306296,#306297); +#306295 = CARTESIAN_POINT('',(121.877882,-110.920736,0.)); +#306296 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#306297 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306298 = ADVANCED_FACE('',(#306299),#306315,.F.); +#306299 = FACE_BOUND('',#306300,.F.); +#306300 = EDGE_LOOP('',(#306301,#306302,#306308,#306309)); +#306301 = ORIENTED_EDGE('',*,*,#306280,.T.); +#306302 = ORIENTED_EDGE('',*,*,#306303,.T.); +#306303 = EDGE_CURVE('',#306273,#305982,#306304,.T.); +#306304 = LINE('',#306305,#306306); +#306305 = CARTESIAN_POINT('',(121.90028,-110.866664,-3.5E-02)); +#306306 = VECTOR('',#306307,1.); +#306307 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#306308 = ORIENTED_EDGE('',*,*,#305979,.F.); +#306309 = ORIENTED_EDGE('',*,*,#306310,.F.); +#306310 = EDGE_CURVE('',#306281,#305980,#306311,.T.); +#306311 = LINE('',#306312,#306313); +#306312 = CARTESIAN_POINT('',(121.90028,-110.866664,0.)); +#306313 = VECTOR('',#306314,1.); +#306314 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#306315 = PLANE('',#306316); +#306316 = AXIS2_PLACEMENT_3D('',#306317,#306318,#306319); +#306317 = CARTESIAN_POINT('',(121.90028,-110.866664,0.)); +#306318 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#306319 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#306320 = ADVANCED_FACE('',(#306321),#306348,.F.); +#306321 = FACE_BOUND('',#306322,.F.); +#306322 = EDGE_LOOP('',(#306323,#306333,#306340,#306341)); +#306323 = ORIENTED_EDGE('',*,*,#306324,.T.); +#306324 = EDGE_CURVE('',#306325,#306327,#306329,.T.); +#306325 = VERTEX_POINT('',#306326); +#306326 = CARTESIAN_POINT('',(121.637255,-112.,0.)); +#306327 = VERTEX_POINT('',#306328); +#306328 = CARTESIAN_POINT('',(121.637255,-112.,-3.5E-02)); +#306329 = LINE('',#306330,#306331); +#306330 = CARTESIAN_POINT('',(121.637255,-112.,0.)); +#306331 = VECTOR('',#306332,1.); +#306332 = DIRECTION('',(0.,0.,-1.)); +#306333 = ORIENTED_EDGE('',*,*,#306334,.T.); +#306334 = EDGE_CURVE('',#306327,#306327,#306335,.T.); +#306335 = CIRCLE('',#306336,0.137255); +#306336 = AXIS2_PLACEMENT_3D('',#306337,#306338,#306339); +#306337 = CARTESIAN_POINT('',(121.5,-112.,-3.5E-02)); +#306338 = DIRECTION('',(0.,0.,1.)); +#306339 = DIRECTION('',(1.,0.,-0.)); +#306340 = ORIENTED_EDGE('',*,*,#306324,.F.); +#306341 = ORIENTED_EDGE('',*,*,#306342,.F.); +#306342 = EDGE_CURVE('',#306325,#306325,#306343,.T.); +#306343 = CIRCLE('',#306344,0.137255); +#306344 = AXIS2_PLACEMENT_3D('',#306345,#306346,#306347); +#306345 = CARTESIAN_POINT('',(121.5,-112.,0.)); +#306346 = DIRECTION('',(0.,0.,1.)); +#306347 = DIRECTION('',(1.,0.,-0.)); +#306348 = CYLINDRICAL_SURFACE('',#306349,0.137255); +#306349 = AXIS2_PLACEMENT_3D('',#306350,#306351,#306352); +#306350 = CARTESIAN_POINT('',(121.5,-112.,0.)); +#306351 = DIRECTION('',(0.,0.,1.)); +#306352 = DIRECTION('',(1.,0.,-0.)); +#306353 = ADVANCED_FACE('',(#306354,#306367),#306370,.F.); +#306354 = FACE_BOUND('',#306355,.F.); +#306355 = EDGE_LOOP('',(#306356,#306357,#306358,#306359,#306360,#306361, + #306362,#306363,#306364,#306365,#306366)); +#306356 = ORIENTED_EDGE('',*,*,#306006,.T.); +#306357 = ORIENTED_EDGE('',*,*,#306038,.T.); +#306358 = ORIENTED_EDGE('',*,*,#306069,.T.); +#306359 = ORIENTED_EDGE('',*,*,#306100,.T.); +#306360 = ORIENTED_EDGE('',*,*,#306131,.T.); +#306361 = ORIENTED_EDGE('',*,*,#306163,.T.); +#306362 = ORIENTED_EDGE('',*,*,#306195,.T.); +#306363 = ORIENTED_EDGE('',*,*,#306226,.T.); +#306364 = ORIENTED_EDGE('',*,*,#306257,.T.); +#306365 = ORIENTED_EDGE('',*,*,#306288,.T.); +#306366 = ORIENTED_EDGE('',*,*,#306310,.T.); +#306367 = FACE_BOUND('',#306368,.F.); +#306368 = EDGE_LOOP('',(#306369)); +#306369 = ORIENTED_EDGE('',*,*,#306342,.T.); +#306370 = PLANE('',#306371); +#306371 = AXIS2_PLACEMENT_3D('',#306372,#306373,#306374); +#306372 = CARTESIAN_POINT('',(0.,0.,0.)); +#306373 = DIRECTION('',(-0.,-0.,-1.)); +#306374 = DIRECTION('',(-1.,0.,0.)); +#306375 = ADVANCED_FACE('',(#306376,#306389),#306392,.T.); +#306376 = FACE_BOUND('',#306377,.T.); +#306377 = EDGE_LOOP('',(#306378,#306379,#306380,#306381,#306382,#306383, + #306384,#306385,#306386,#306387,#306388)); +#306378 = ORIENTED_EDGE('',*,*,#305989,.T.); +#306379 = ORIENTED_EDGE('',*,*,#306022,.T.); +#306380 = ORIENTED_EDGE('',*,*,#306053,.T.); +#306381 = ORIENTED_EDGE('',*,*,#306084,.T.); +#306382 = ORIENTED_EDGE('',*,*,#306115,.T.); +#306383 = ORIENTED_EDGE('',*,*,#306146,.T.); +#306384 = ORIENTED_EDGE('',*,*,#306179,.T.); +#306385 = ORIENTED_EDGE('',*,*,#306210,.T.); +#306386 = ORIENTED_EDGE('',*,*,#306241,.T.); +#306387 = ORIENTED_EDGE('',*,*,#306272,.T.); +#306388 = ORIENTED_EDGE('',*,*,#306303,.T.); +#306389 = FACE_BOUND('',#306390,.T.); +#306390 = EDGE_LOOP('',(#306391)); +#306391 = ORIENTED_EDGE('',*,*,#306334,.T.); +#306392 = PLANE('',#306393); +#306393 = AXIS2_PLACEMENT_3D('',#306394,#306395,#306396); +#306394 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#306395 = DIRECTION('',(-0.,-0.,-1.)); +#306396 = DIRECTION('',(-1.,0.,0.)); +#306397 = MANIFOLD_SOLID_BREP('',#306398); +#306398 = CLOSED_SHELL('',(#306399,#306441,#306472,#306503,#306534, + #306565,#306598,#306629,#306660,#306691,#306722,#306744,#306777, + #306799)); +#306399 = ADVANCED_FACE('',(#306400),#306436,.T.); +#306400 = FACE_BOUND('',#306401,.F.); +#306401 = EDGE_LOOP('',(#306402,#306412,#306421,#306429)); +#306402 = ORIENTED_EDGE('',*,*,#306403,.T.); +#306403 = EDGE_CURVE('',#306404,#306406,#306408,.T.); +#306404 = VERTEX_POINT('',#306405); +#306405 = CARTESIAN_POINT('',(131.391664,-109.87528,0.)); +#306406 = VERTEX_POINT('',#306407); +#306407 = CARTESIAN_POINT('',(131.391664,-109.87528,-3.5E-02)); +#306408 = LINE('',#306409,#306410); +#306409 = CARTESIAN_POINT('',(131.391664,-109.87528,0.)); +#306410 = VECTOR('',#306411,1.); +#306411 = DIRECTION('',(0.,0.,-1.)); +#306412 = ORIENTED_EDGE('',*,*,#306413,.T.); +#306413 = EDGE_CURVE('',#306406,#306414,#306416,.T.); +#306414 = VERTEX_POINT('',#306415); +#306415 = CARTESIAN_POINT('',(131.622118,-109.970736,-3.5E-02)); +#306416 = CIRCLE('',#306417,0.150000415027); +#306417 = AXIS2_PLACEMENT_3D('',#306418,#306419,#306420); +#306418 = CARTESIAN_POINT('',(131.475,-110.0000006302,-3.5E-02)); +#306419 = DIRECTION('',(0.,0.,-1.)); +#306420 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#306421 = ORIENTED_EDGE('',*,*,#306422,.F.); +#306422 = EDGE_CURVE('',#306423,#306414,#306425,.T.); +#306423 = VERTEX_POINT('',#306424); +#306424 = CARTESIAN_POINT('',(131.622118,-109.970736,0.)); +#306425 = LINE('',#306426,#306427); +#306426 = CARTESIAN_POINT('',(131.622118,-109.970736,0.)); +#306427 = VECTOR('',#306428,1.); +#306428 = DIRECTION('',(0.,0.,-1.)); +#306429 = ORIENTED_EDGE('',*,*,#306430,.F.); +#306430 = EDGE_CURVE('',#306404,#306423,#306431,.T.); +#306431 = CIRCLE('',#306432,0.150000415027); +#306432 = AXIS2_PLACEMENT_3D('',#306433,#306434,#306435); +#306433 = CARTESIAN_POINT('',(131.475,-110.0000006302,0.)); +#306434 = DIRECTION('',(0.,0.,-1.)); +#306435 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#306436 = CYLINDRICAL_SURFACE('',#306437,0.150000415027); +#306437 = AXIS2_PLACEMENT_3D('',#306438,#306439,#306440); +#306438 = CARTESIAN_POINT('',(131.475,-110.0000006302,0.)); +#306439 = DIRECTION('',(-0.,-0.,1.)); +#306440 = DIRECTION('',(-0.555571796152,0.831468567849,0.)); +#306441 = ADVANCED_FACE('',(#306442),#306467,.F.); +#306442 = FACE_BOUND('',#306443,.F.); +#306443 = EDGE_LOOP('',(#306444,#306445,#306453,#306461)); +#306444 = ORIENTED_EDGE('',*,*,#306422,.T.); +#306445 = ORIENTED_EDGE('',*,*,#306446,.T.); +#306446 = EDGE_CURVE('',#306414,#306447,#306449,.T.); +#306447 = VERTEX_POINT('',#306448); +#306448 = CARTESIAN_POINT('',(131.622118,-110.804263,-3.5E-02)); +#306449 = LINE('',#306450,#306451); +#306450 = CARTESIAN_POINT('',(131.622118,-109.970736,-3.5E-02)); +#306451 = VECTOR('',#306452,1.); +#306452 = DIRECTION('',(0.,-1.,0.)); +#306453 = ORIENTED_EDGE('',*,*,#306454,.F.); +#306454 = EDGE_CURVE('',#306455,#306447,#306457,.T.); +#306455 = VERTEX_POINT('',#306456); +#306456 = CARTESIAN_POINT('',(131.622118,-110.804263,0.)); +#306457 = LINE('',#306458,#306459); +#306458 = CARTESIAN_POINT('',(131.622118,-110.804263,0.)); +#306459 = VECTOR('',#306460,1.); +#306460 = DIRECTION('',(0.,0.,-1.)); +#306461 = ORIENTED_EDGE('',*,*,#306462,.F.); +#306462 = EDGE_CURVE('',#306423,#306455,#306463,.T.); +#306463 = LINE('',#306464,#306465); +#306464 = CARTESIAN_POINT('',(131.622118,-109.970736,0.)); +#306465 = VECTOR('',#306466,1.); +#306466 = DIRECTION('',(0.,-1.,0.)); +#306467 = PLANE('',#306468); +#306468 = AXIS2_PLACEMENT_3D('',#306469,#306470,#306471); +#306469 = CARTESIAN_POINT('',(131.622118,-109.970736,0.)); +#306470 = DIRECTION('',(-1.,-0.,-0.)); +#306471 = DIRECTION('',(0.,-1.,0.)); +#306472 = ADVANCED_FACE('',(#306473),#306498,.F.); +#306473 = FACE_BOUND('',#306474,.F.); +#306474 = EDGE_LOOP('',(#306475,#306476,#306484,#306492)); +#306475 = ORIENTED_EDGE('',*,*,#306454,.T.); +#306476 = ORIENTED_EDGE('',*,*,#306477,.T.); +#306477 = EDGE_CURVE('',#306447,#306478,#306480,.T.); +#306478 = VERTEX_POINT('',#306479); +#306479 = CARTESIAN_POINT('',(131.599721,-110.858335,-3.5E-02)); +#306480 = LINE('',#306481,#306482); +#306481 = CARTESIAN_POINT('',(131.622118,-110.804263,-3.5E-02)); +#306482 = VECTOR('',#306483,1.); +#306483 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306484 = ORIENTED_EDGE('',*,*,#306485,.F.); +#306485 = EDGE_CURVE('',#306486,#306478,#306488,.T.); +#306486 = VERTEX_POINT('',#306487); +#306487 = CARTESIAN_POINT('',(131.599721,-110.858335,0.)); +#306488 = LINE('',#306489,#306490); +#306489 = CARTESIAN_POINT('',(131.599721,-110.858335,0.)); +#306490 = VECTOR('',#306491,1.); +#306491 = DIRECTION('',(0.,0.,-1.)); +#306492 = ORIENTED_EDGE('',*,*,#306493,.F.); +#306493 = EDGE_CURVE('',#306455,#306486,#306494,.T.); +#306494 = LINE('',#306495,#306496); +#306495 = CARTESIAN_POINT('',(131.622118,-110.804263,0.)); +#306496 = VECTOR('',#306497,1.); +#306497 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306498 = PLANE('',#306499); +#306499 = AXIS2_PLACEMENT_3D('',#306500,#306501,#306502); +#306500 = CARTESIAN_POINT('',(131.622118,-110.804263,0.)); +#306501 = DIRECTION('',(-0.923881681501,0.382678244204,0.)); +#306502 = DIRECTION('',(-0.382678244204,-0.923881681501,0.)); +#306503 = ADVANCED_FACE('',(#306504),#306529,.F.); +#306504 = FACE_BOUND('',#306505,.F.); +#306505 = EDGE_LOOP('',(#306506,#306507,#306515,#306523)); +#306506 = ORIENTED_EDGE('',*,*,#306485,.T.); +#306507 = ORIENTED_EDGE('',*,*,#306508,.T.); +#306508 = EDGE_CURVE('',#306478,#306509,#306511,.T.); +#306509 = VERTEX_POINT('',#306510); +#306510 = CARTESIAN_POINT('',(131.337682,-111.124449,-3.5E-02)); +#306511 = LINE('',#306512,#306513); +#306512 = CARTESIAN_POINT('',(131.599721,-110.858335,-3.5E-02)); +#306513 = VECTOR('',#306514,1.); +#306514 = DIRECTION('',(-0.701630167546,-0.712541302655,0.)); +#306515 = ORIENTED_EDGE('',*,*,#306516,.F.); +#306516 = EDGE_CURVE('',#306517,#306509,#306519,.T.); +#306517 = VERTEX_POINT('',#306518); +#306518 = CARTESIAN_POINT('',(131.337682,-111.124449,0.)); +#306519 = LINE('',#306520,#306521); +#306520 = CARTESIAN_POINT('',(131.337682,-111.124449,0.)); +#306521 = VECTOR('',#306522,1.); +#306522 = DIRECTION('',(0.,0.,-1.)); +#306523 = ORIENTED_EDGE('',*,*,#306524,.F.); +#306524 = EDGE_CURVE('',#306486,#306517,#306525,.T.); +#306525 = LINE('',#306526,#306527); +#306526 = CARTESIAN_POINT('',(131.599721,-110.858335,0.)); +#306527 = VECTOR('',#306528,1.); +#306528 = DIRECTION('',(-0.701630167546,-0.712541302655,0.)); +#306529 = PLANE('',#306530); +#306530 = AXIS2_PLACEMENT_3D('',#306531,#306532,#306533); +#306531 = CARTESIAN_POINT('',(131.599721,-110.858335,0.)); +#306532 = DIRECTION('',(-0.712541302655,0.701630167546,0.)); +#306533 = DIRECTION('',(-0.701630167546,-0.712541302655,0.)); +#306534 = ADVANCED_FACE('',(#306535),#306560,.F.); +#306535 = FACE_BOUND('',#306536,.F.); +#306536 = EDGE_LOOP('',(#306537,#306538,#306546,#306554)); +#306537 = ORIENTED_EDGE('',*,*,#306516,.T.); +#306538 = ORIENTED_EDGE('',*,*,#306539,.T.); +#306539 = EDGE_CURVE('',#306509,#306540,#306542,.T.); +#306540 = VERTEX_POINT('',#306541); +#306541 = CARTESIAN_POINT('',(131.347433,-111.160842,-3.5E-02)); +#306542 = LINE('',#306543,#306544); +#306543 = CARTESIAN_POINT('',(131.337682,-111.124449,-3.5E-02)); +#306544 = VECTOR('',#306545,1.); +#306545 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306546 = ORIENTED_EDGE('',*,*,#306547,.F.); +#306547 = EDGE_CURVE('',#306548,#306540,#306550,.T.); +#306548 = VERTEX_POINT('',#306549); +#306549 = CARTESIAN_POINT('',(131.347433,-111.160842,0.)); +#306550 = LINE('',#306551,#306552); +#306551 = CARTESIAN_POINT('',(131.347433,-111.160842,0.)); +#306552 = VECTOR('',#306553,1.); +#306553 = DIRECTION('',(0.,0.,-1.)); +#306554 = ORIENTED_EDGE('',*,*,#306555,.F.); +#306555 = EDGE_CURVE('',#306517,#306548,#306556,.T.); +#306556 = LINE('',#306557,#306558); +#306557 = CARTESIAN_POINT('',(131.337682,-111.124449,0.)); +#306558 = VECTOR('',#306559,1.); +#306559 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306560 = PLANE('',#306561); +#306561 = AXIS2_PLACEMENT_3D('',#306562,#306563,#306564); +#306562 = CARTESIAN_POINT('',(131.337682,-111.124449,0.)); +#306563 = DIRECTION('',(-0.96592897777,-0.25880728333,-0.)); +#306564 = DIRECTION('',(0.25880728333,-0.96592897777,0.)); +#306565 = ADVANCED_FACE('',(#306566),#306593,.T.); +#306566 = FACE_BOUND('',#306567,.F.); +#306567 = EDGE_LOOP('',(#306568,#306569,#306578,#306586)); +#306568 = ORIENTED_EDGE('',*,*,#306547,.T.); +#306569 = ORIENTED_EDGE('',*,*,#306570,.T.); +#306570 = EDGE_CURVE('',#306540,#306571,#306573,.T.); +#306571 = VERTEX_POINT('',#306572); +#306572 = CARTESIAN_POINT('',(131.089158,-110.902567,-3.5E-02)); +#306573 = CIRCLE('',#306574,0.299999641111); +#306574 = AXIS2_PLACEMENT_3D('',#306575,#306576,#306577); +#306575 = CARTESIAN_POINT('',(131.04999993135,-111.2000000686,-3.5E-02) + ); +#306576 = DIRECTION('',(0.,0.,-1.)); +#306577 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306578 = ORIENTED_EDGE('',*,*,#306579,.F.); +#306579 = EDGE_CURVE('',#306580,#306571,#306582,.T.); +#306580 = VERTEX_POINT('',#306581); +#306581 = CARTESIAN_POINT('',(131.089158,-110.902567,0.)); +#306582 = LINE('',#306583,#306584); +#306583 = CARTESIAN_POINT('',(131.089158,-110.902567,0.)); +#306584 = VECTOR('',#306585,1.); +#306585 = DIRECTION('',(0.,0.,-1.)); +#306586 = ORIENTED_EDGE('',*,*,#306587,.F.); +#306587 = EDGE_CURVE('',#306548,#306580,#306588,.T.); +#306588 = CIRCLE('',#306589,0.299999641111); +#306589 = AXIS2_PLACEMENT_3D('',#306590,#306591,#306592); +#306590 = CARTESIAN_POINT('',(131.04999993135,-111.2000000686,0.)); +#306591 = DIRECTION('',(0.,0.,-1.)); +#306592 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306593 = CYLINDRICAL_SURFACE('',#306594,0.299999641111); +#306594 = AXIS2_PLACEMENT_3D('',#306595,#306596,#306597); +#306595 = CARTESIAN_POINT('',(131.04999993135,-111.2000000686,0.)); +#306596 = DIRECTION('',(-0.,-0.,1.)); +#306597 = DIRECTION('',(0.991444748227,0.130527051649,0.)); +#306598 = ADVANCED_FACE('',(#306599),#306624,.F.); +#306599 = FACE_BOUND('',#306600,.F.); +#306600 = EDGE_LOOP('',(#306601,#306602,#306610,#306618)); +#306601 = ORIENTED_EDGE('',*,*,#306579,.T.); +#306602 = ORIENTED_EDGE('',*,*,#306603,.T.); +#306603 = EDGE_CURVE('',#306571,#306604,#306606,.T.); +#306604 = VERTEX_POINT('',#306605); +#306605 = CARTESIAN_POINT('',(131.12555,-110.912317,-3.5E-02)); +#306606 = LINE('',#306607,#306608); +#306607 = CARTESIAN_POINT('',(131.089158,-110.902567,-3.5E-02)); +#306608 = VECTOR('',#306609,1.); +#306609 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306610 = ORIENTED_EDGE('',*,*,#306611,.F.); +#306611 = EDGE_CURVE('',#306612,#306604,#306614,.T.); +#306612 = VERTEX_POINT('',#306613); +#306613 = CARTESIAN_POINT('',(131.12555,-110.912317,0.)); +#306614 = LINE('',#306615,#306616); +#306615 = CARTESIAN_POINT('',(131.12555,-110.912317,0.)); +#306616 = VECTOR('',#306617,1.); +#306617 = DIRECTION('',(0.,0.,-1.)); +#306618 = ORIENTED_EDGE('',*,*,#306619,.F.); +#306619 = EDGE_CURVE('',#306580,#306612,#306620,.T.); +#306620 = LINE('',#306621,#306622); +#306621 = CARTESIAN_POINT('',(131.089158,-110.902567,0.)); +#306622 = VECTOR('',#306623,1.); +#306623 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306624 = PLANE('',#306625); +#306625 = AXIS2_PLACEMENT_3D('',#306626,#306627,#306628); +#306626 = CARTESIAN_POINT('',(131.089158,-110.902567,0.)); +#306627 = DIRECTION('',(-0.258789153994,-0.965933835092,-0.)); +#306628 = DIRECTION('',(0.965933835092,-0.258789153994,0.)); +#306629 = ADVANCED_FACE('',(#306630),#306655,.F.); +#306630 = FACE_BOUND('',#306631,.F.); +#306631 = EDGE_LOOP('',(#306632,#306633,#306641,#306649)); +#306632 = ORIENTED_EDGE('',*,*,#306611,.T.); +#306633 = ORIENTED_EDGE('',*,*,#306634,.T.); +#306634 = EDGE_CURVE('',#306604,#306635,#306637,.T.); +#306635 = VERTEX_POINT('',#306636); +#306636 = CARTESIAN_POINT('',(131.325,-110.712868,-3.5E-02)); +#306637 = LINE('',#306638,#306639); +#306638 = CARTESIAN_POINT('',(131.12555,-110.912317,-3.5E-02)); +#306639 = VECTOR('',#306640,1.); +#306640 = DIRECTION('',(0.70710855383,0.707105008538,0.)); +#306641 = ORIENTED_EDGE('',*,*,#306642,.F.); +#306642 = EDGE_CURVE('',#306643,#306635,#306645,.T.); +#306643 = VERTEX_POINT('',#306644); +#306644 = CARTESIAN_POINT('',(131.325,-110.712868,0.)); +#306645 = LINE('',#306646,#306647); +#306646 = CARTESIAN_POINT('',(131.325,-110.712868,0.)); +#306647 = VECTOR('',#306648,1.); +#306648 = DIRECTION('',(0.,0.,-1.)); +#306649 = ORIENTED_EDGE('',*,*,#306650,.F.); +#306650 = EDGE_CURVE('',#306612,#306643,#306651,.T.); +#306651 = LINE('',#306652,#306653); +#306652 = CARTESIAN_POINT('',(131.12555,-110.912317,0.)); +#306653 = VECTOR('',#306654,1.); +#306654 = DIRECTION('',(0.70710855383,0.707105008538,0.)); +#306655 = PLANE('',#306656); +#306656 = AXIS2_PLACEMENT_3D('',#306657,#306658,#306659); +#306657 = CARTESIAN_POINT('',(131.12555,-110.912317,0.)); +#306658 = DIRECTION('',(0.707105008538,-0.70710855383,0.)); +#306659 = DIRECTION('',(0.70710855383,0.707105008538,0.)); +#306660 = ADVANCED_FACE('',(#306661),#306686,.F.); +#306661 = FACE_BOUND('',#306662,.F.); +#306662 = EDGE_LOOP('',(#306663,#306664,#306672,#306680)); +#306663 = ORIENTED_EDGE('',*,*,#306642,.T.); +#306664 = ORIENTED_EDGE('',*,*,#306665,.T.); +#306665 = EDGE_CURVE('',#306635,#306666,#306668,.T.); +#306666 = VERTEX_POINT('',#306667); +#306667 = CARTESIAN_POINT('',(131.327882,-109.970736,-3.5E-02)); +#306668 = LINE('',#306669,#306670); +#306669 = CARTESIAN_POINT('',(131.325,-110.712868,-3.5E-02)); +#306670 = VECTOR('',#306671,1.); +#306671 = DIRECTION('',(3.883376904311E-03,0.999992459663,0.)); +#306672 = ORIENTED_EDGE('',*,*,#306673,.F.); +#306673 = EDGE_CURVE('',#306674,#306666,#306676,.T.); +#306674 = VERTEX_POINT('',#306675); +#306675 = CARTESIAN_POINT('',(131.327882,-109.970736,0.)); +#306676 = LINE('',#306677,#306678); +#306677 = CARTESIAN_POINT('',(131.327882,-109.970736,0.)); +#306678 = VECTOR('',#306679,1.); +#306679 = DIRECTION('',(0.,0.,-1.)); +#306680 = ORIENTED_EDGE('',*,*,#306681,.F.); +#306681 = EDGE_CURVE('',#306643,#306674,#306682,.T.); +#306682 = LINE('',#306683,#306684); +#306683 = CARTESIAN_POINT('',(131.325,-110.712868,0.)); +#306684 = VECTOR('',#306685,1.); +#306685 = DIRECTION('',(3.883376904311E-03,0.999992459663,0.)); +#306686 = PLANE('',#306687); +#306687 = AXIS2_PLACEMENT_3D('',#306688,#306689,#306690); +#306688 = CARTESIAN_POINT('',(131.325,-110.712868,0.)); +#306689 = DIRECTION('',(0.999992459663,-3.883376904311E-03,0.)); +#306690 = DIRECTION('',(3.883376904311E-03,0.999992459663,0.)); +#306691 = ADVANCED_FACE('',(#306692),#306717,.F.); +#306692 = FACE_BOUND('',#306693,.F.); +#306693 = EDGE_LOOP('',(#306694,#306695,#306703,#306711)); +#306694 = ORIENTED_EDGE('',*,*,#306673,.T.); +#306695 = ORIENTED_EDGE('',*,*,#306696,.T.); +#306696 = EDGE_CURVE('',#306666,#306697,#306699,.T.); +#306697 = VERTEX_POINT('',#306698); +#306698 = CARTESIAN_POINT('',(131.35028,-109.916664,-3.5E-02)); +#306699 = LINE('',#306700,#306701); +#306700 = CARTESIAN_POINT('',(131.327882,-109.970736,-3.5E-02)); +#306701 = VECTOR('',#306702,1.); +#306702 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306703 = ORIENTED_EDGE('',*,*,#306704,.F.); +#306704 = EDGE_CURVE('',#306705,#306697,#306707,.T.); +#306705 = VERTEX_POINT('',#306706); +#306706 = CARTESIAN_POINT('',(131.35028,-109.916664,0.)); +#306707 = LINE('',#306708,#306709); +#306708 = CARTESIAN_POINT('',(131.35028,-109.916664,0.)); +#306709 = VECTOR('',#306710,1.); +#306710 = DIRECTION('',(0.,0.,-1.)); +#306711 = ORIENTED_EDGE('',*,*,#306712,.F.); +#306712 = EDGE_CURVE('',#306674,#306705,#306713,.T.); +#306713 = LINE('',#306714,#306715); +#306714 = CARTESIAN_POINT('',(131.327882,-109.970736,0.)); +#306715 = VECTOR('',#306716,1.); +#306716 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306717 = PLANE('',#306718); +#306718 = AXIS2_PLACEMENT_3D('',#306719,#306720,#306721); +#306719 = CARTESIAN_POINT('',(131.327882,-109.970736,0.)); +#306720 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#306721 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#306722 = ADVANCED_FACE('',(#306723),#306739,.F.); +#306723 = FACE_BOUND('',#306724,.F.); +#306724 = EDGE_LOOP('',(#306725,#306726,#306732,#306733)); +#306725 = ORIENTED_EDGE('',*,*,#306704,.T.); +#306726 = ORIENTED_EDGE('',*,*,#306727,.T.); +#306727 = EDGE_CURVE('',#306697,#306406,#306728,.T.); +#306728 = LINE('',#306729,#306730); +#306729 = CARTESIAN_POINT('',(131.35028,-109.916664,-3.5E-02)); +#306730 = VECTOR('',#306731,1.); +#306731 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#306732 = ORIENTED_EDGE('',*,*,#306403,.F.); +#306733 = ORIENTED_EDGE('',*,*,#306734,.F.); +#306734 = EDGE_CURVE('',#306705,#306404,#306735,.T.); +#306735 = LINE('',#306736,#306737); +#306736 = CARTESIAN_POINT('',(131.35028,-109.916664,0.)); +#306737 = VECTOR('',#306738,1.); +#306738 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#306739 = PLANE('',#306740); +#306740 = AXIS2_PLACEMENT_3D('',#306741,#306742,#306743); +#306741 = CARTESIAN_POINT('',(131.35028,-109.916664,0.)); +#306742 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#306743 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#306744 = ADVANCED_FACE('',(#306745),#306772,.F.); +#306745 = FACE_BOUND('',#306746,.F.); +#306746 = EDGE_LOOP('',(#306747,#306757,#306764,#306765)); +#306747 = ORIENTED_EDGE('',*,*,#306748,.T.); +#306748 = EDGE_CURVE('',#306749,#306751,#306753,.T.); +#306749 = VERTEX_POINT('',#306750); +#306750 = CARTESIAN_POINT('',(131.187255,-111.2,0.)); +#306751 = VERTEX_POINT('',#306752); +#306752 = CARTESIAN_POINT('',(131.187255,-111.2,-3.5E-02)); +#306753 = LINE('',#306754,#306755); +#306754 = CARTESIAN_POINT('',(131.187255,-111.2,0.)); +#306755 = VECTOR('',#306756,1.); +#306756 = DIRECTION('',(0.,0.,-1.)); +#306757 = ORIENTED_EDGE('',*,*,#306758,.T.); +#306758 = EDGE_CURVE('',#306751,#306751,#306759,.T.); +#306759 = CIRCLE('',#306760,0.137255); +#306760 = AXIS2_PLACEMENT_3D('',#306761,#306762,#306763); +#306761 = CARTESIAN_POINT('',(131.05,-111.2,-3.5E-02)); +#306762 = DIRECTION('',(0.,0.,1.)); +#306763 = DIRECTION('',(1.,0.,-0.)); +#306764 = ORIENTED_EDGE('',*,*,#306748,.F.); +#306765 = ORIENTED_EDGE('',*,*,#306766,.F.); +#306766 = EDGE_CURVE('',#306749,#306749,#306767,.T.); +#306767 = CIRCLE('',#306768,0.137255); +#306768 = AXIS2_PLACEMENT_3D('',#306769,#306770,#306771); +#306769 = CARTESIAN_POINT('',(131.05,-111.2,0.)); +#306770 = DIRECTION('',(0.,0.,1.)); +#306771 = DIRECTION('',(1.,0.,-0.)); +#306772 = CYLINDRICAL_SURFACE('',#306773,0.137255); +#306773 = AXIS2_PLACEMENT_3D('',#306774,#306775,#306776); +#306774 = CARTESIAN_POINT('',(131.05,-111.2,0.)); +#306775 = DIRECTION('',(0.,0.,1.)); +#306776 = DIRECTION('',(1.,0.,-0.)); +#306777 = ADVANCED_FACE('',(#306778,#306791),#306794,.F.); +#306778 = FACE_BOUND('',#306779,.F.); +#306779 = EDGE_LOOP('',(#306780,#306781,#306782,#306783,#306784,#306785, + #306786,#306787,#306788,#306789,#306790)); +#306780 = ORIENTED_EDGE('',*,*,#306430,.T.); +#306781 = ORIENTED_EDGE('',*,*,#306462,.T.); +#306782 = ORIENTED_EDGE('',*,*,#306493,.T.); +#306783 = ORIENTED_EDGE('',*,*,#306524,.T.); +#306784 = ORIENTED_EDGE('',*,*,#306555,.T.); +#306785 = ORIENTED_EDGE('',*,*,#306587,.T.); +#306786 = ORIENTED_EDGE('',*,*,#306619,.T.); +#306787 = ORIENTED_EDGE('',*,*,#306650,.T.); +#306788 = ORIENTED_EDGE('',*,*,#306681,.T.); +#306789 = ORIENTED_EDGE('',*,*,#306712,.T.); +#306790 = ORIENTED_EDGE('',*,*,#306734,.T.); +#306791 = FACE_BOUND('',#306792,.F.); +#306792 = EDGE_LOOP('',(#306793)); +#306793 = ORIENTED_EDGE('',*,*,#306766,.T.); +#306794 = PLANE('',#306795); +#306795 = AXIS2_PLACEMENT_3D('',#306796,#306797,#306798); +#306796 = CARTESIAN_POINT('',(0.,0.,0.)); +#306797 = DIRECTION('',(-0.,-0.,-1.)); +#306798 = DIRECTION('',(-1.,0.,0.)); +#306799 = ADVANCED_FACE('',(#306800,#306813),#306816,.T.); +#306800 = FACE_BOUND('',#306801,.T.); +#306801 = EDGE_LOOP('',(#306802,#306803,#306804,#306805,#306806,#306807, + #306808,#306809,#306810,#306811,#306812)); +#306802 = ORIENTED_EDGE('',*,*,#306413,.T.); +#306803 = ORIENTED_EDGE('',*,*,#306446,.T.); +#306804 = ORIENTED_EDGE('',*,*,#306477,.T.); +#306805 = ORIENTED_EDGE('',*,*,#306508,.T.); +#306806 = ORIENTED_EDGE('',*,*,#306539,.T.); +#306807 = ORIENTED_EDGE('',*,*,#306570,.T.); +#306808 = ORIENTED_EDGE('',*,*,#306603,.T.); +#306809 = ORIENTED_EDGE('',*,*,#306634,.T.); +#306810 = ORIENTED_EDGE('',*,*,#306665,.T.); +#306811 = ORIENTED_EDGE('',*,*,#306696,.T.); +#306812 = ORIENTED_EDGE('',*,*,#306727,.T.); +#306813 = FACE_BOUND('',#306814,.T.); +#306814 = EDGE_LOOP('',(#306815)); +#306815 = ORIENTED_EDGE('',*,*,#306758,.T.); +#306816 = PLANE('',#306817); +#306817 = AXIS2_PLACEMENT_3D('',#306818,#306819,#306820); +#306818 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#306819 = DIRECTION('',(-0.,-0.,-1.)); +#306820 = DIRECTION('',(-1.,0.,0.)); +#306821 = MANIFOLD_SOLID_BREP('',#306822); +#306822 = CLOSED_SHELL('',(#306823,#306863,#306896,#306927,#306958, + #306991,#307013,#307046,#307063)); +#306823 = ADVANCED_FACE('',(#306824),#306858,.F.); +#306824 = FACE_BOUND('',#306825,.F.); +#306825 = EDGE_LOOP('',(#306826,#306836,#306844,#306852)); +#306826 = ORIENTED_EDGE('',*,*,#306827,.T.); +#306827 = EDGE_CURVE('',#306828,#306830,#306832,.T.); +#306828 = VERTEX_POINT('',#306829); +#306829 = CARTESIAN_POINT('',(128.256844,-105.35,0.)); +#306830 = VERTEX_POINT('',#306831); +#306831 = CARTESIAN_POINT('',(128.256844,-105.35,-3.5E-02)); +#306832 = LINE('',#306833,#306834); +#306833 = CARTESIAN_POINT('',(128.256844,-105.35,0.)); +#306834 = VECTOR('',#306835,1.); +#306835 = DIRECTION('',(0.,0.,-1.)); +#306836 = ORIENTED_EDGE('',*,*,#306837,.T.); +#306837 = EDGE_CURVE('',#306830,#306838,#306840,.T.); +#306838 = VERTEX_POINT('',#306839); +#306839 = CARTESIAN_POINT('',(129.579264,-105.352882,-3.5E-02)); +#306840 = LINE('',#306841,#306842); +#306841 = CARTESIAN_POINT('',(128.256844,-105.35,-3.5E-02)); +#306842 = VECTOR('',#306843,1.); +#306843 = DIRECTION('',(0.999997625252,-2.179332705173E-03,0.)); +#306844 = ORIENTED_EDGE('',*,*,#306845,.F.); +#306845 = EDGE_CURVE('',#306846,#306838,#306848,.T.); +#306846 = VERTEX_POINT('',#306847); +#306847 = CARTESIAN_POINT('',(129.579264,-105.352882,0.)); +#306848 = LINE('',#306849,#306850); +#306849 = CARTESIAN_POINT('',(129.579264,-105.352882,0.)); +#306850 = VECTOR('',#306851,1.); +#306851 = DIRECTION('',(0.,0.,-1.)); +#306852 = ORIENTED_EDGE('',*,*,#306853,.F.); +#306853 = EDGE_CURVE('',#306828,#306846,#306854,.T.); +#306854 = LINE('',#306855,#306856); +#306855 = CARTESIAN_POINT('',(128.256844,-105.35,0.)); +#306856 = VECTOR('',#306857,1.); +#306857 = DIRECTION('',(0.999997625252,-2.179332705173E-03,0.)); +#306858 = PLANE('',#306859); +#306859 = AXIS2_PLACEMENT_3D('',#306860,#306861,#306862); +#306860 = CARTESIAN_POINT('',(128.256844,-105.35,0.)); +#306861 = DIRECTION('',(-2.179332705173E-03,-0.999997625252,-0.)); +#306862 = DIRECTION('',(0.999997625252,-2.179332705173E-03,0.)); +#306863 = ADVANCED_FACE('',(#306864),#306891,.T.); +#306864 = FACE_BOUND('',#306865,.F.); +#306865 = EDGE_LOOP('',(#306866,#306867,#306876,#306884)); +#306866 = ORIENTED_EDGE('',*,*,#306845,.T.); +#306867 = ORIENTED_EDGE('',*,*,#306868,.T.); +#306868 = EDGE_CURVE('',#306838,#306869,#306871,.T.); +#306869 = VERTEX_POINT('',#306870); +#306870 = CARTESIAN_POINT('',(129.579264,-105.647118,-3.5E-02)); +#306871 = CIRCLE('',#306872,0.150000292066); +#306872 = AXIS2_PLACEMENT_3D('',#306873,#306874,#306875); +#306873 = CARTESIAN_POINT('',(129.55,-105.5,-3.5E-02)); +#306874 = DIRECTION('',(0.,0.,-1.)); +#306875 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#306876 = ORIENTED_EDGE('',*,*,#306877,.F.); +#306877 = EDGE_CURVE('',#306878,#306869,#306880,.T.); +#306878 = VERTEX_POINT('',#306879); +#306879 = CARTESIAN_POINT('',(129.579264,-105.647118,0.)); +#306880 = LINE('',#306881,#306882); +#306881 = CARTESIAN_POINT('',(129.579264,-105.647118,0.)); +#306882 = VECTOR('',#306883,1.); +#306883 = DIRECTION('',(0.,0.,-1.)); +#306884 = ORIENTED_EDGE('',*,*,#306885,.F.); +#306885 = EDGE_CURVE('',#306846,#306878,#306886,.T.); +#306886 = CIRCLE('',#306887,0.150000292066); +#306887 = AXIS2_PLACEMENT_3D('',#306888,#306889,#306890); +#306888 = CARTESIAN_POINT('',(129.55,-105.5,0.)); +#306889 = DIRECTION('',(0.,0.,-1.)); +#306890 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#306891 = CYLINDRICAL_SURFACE('',#306892,0.150000292066); +#306892 = AXIS2_PLACEMENT_3D('',#306893,#306894,#306895); +#306893 = CARTESIAN_POINT('',(129.55,-105.5,0.)); +#306894 = DIRECTION('',(-0.,-0.,1.)); +#306895 = DIRECTION('',(0.195092953466,0.980784756972,0.)); +#306896 = ADVANCED_FACE('',(#306897),#306922,.F.); +#306897 = FACE_BOUND('',#306898,.F.); +#306898 = EDGE_LOOP('',(#306899,#306900,#306908,#306916)); +#306899 = ORIENTED_EDGE('',*,*,#306877,.T.); +#306900 = ORIENTED_EDGE('',*,*,#306901,.T.); +#306901 = EDGE_CURVE('',#306869,#306902,#306904,.T.); +#306902 = VERTEX_POINT('',#306903); +#306903 = CARTESIAN_POINT('',(128.256844,-105.65,-3.5E-02)); +#306904 = LINE('',#306905,#306906); +#306905 = CARTESIAN_POINT('',(129.579264,-105.647118,-3.5E-02)); +#306906 = VECTOR('',#306907,1.); +#306907 = DIRECTION('',(-0.999997625252,-2.179332705173E-03,0.)); +#306908 = ORIENTED_EDGE('',*,*,#306909,.F.); +#306909 = EDGE_CURVE('',#306910,#306902,#306912,.T.); +#306910 = VERTEX_POINT('',#306911); +#306911 = CARTESIAN_POINT('',(128.256844,-105.65,0.)); +#306912 = LINE('',#306913,#306914); +#306913 = CARTESIAN_POINT('',(128.256844,-105.65,0.)); +#306914 = VECTOR('',#306915,1.); +#306915 = DIRECTION('',(0.,0.,-1.)); +#306916 = ORIENTED_EDGE('',*,*,#306917,.F.); +#306917 = EDGE_CURVE('',#306878,#306910,#306918,.T.); +#306918 = LINE('',#306919,#306920); +#306919 = CARTESIAN_POINT('',(129.579264,-105.647118,0.)); +#306920 = VECTOR('',#306921,1.); +#306921 = DIRECTION('',(-0.999997625252,-2.179332705173E-03,0.)); +#306922 = PLANE('',#306923); +#306923 = AXIS2_PLACEMENT_3D('',#306924,#306925,#306926); +#306924 = CARTESIAN_POINT('',(129.579264,-105.647118,0.)); +#306925 = DIRECTION('',(-2.179332705173E-03,0.999997625252,0.)); +#306926 = DIRECTION('',(-0.999997625252,-2.179332705173E-03,0.)); +#306927 = ADVANCED_FACE('',(#306928),#306953,.F.); +#306928 = FACE_BOUND('',#306929,.F.); +#306929 = EDGE_LOOP('',(#306930,#306931,#306939,#306947)); +#306930 = ORIENTED_EDGE('',*,*,#306909,.T.); +#306931 = ORIENTED_EDGE('',*,*,#306932,.T.); +#306932 = EDGE_CURVE('',#306902,#306933,#306935,.T.); +#306933 = VERTEX_POINT('',#306934); +#306934 = CARTESIAN_POINT('',(128.238006,-105.682628,-3.5E-02)); +#306935 = LINE('',#306936,#306937); +#306936 = CARTESIAN_POINT('',(128.256844,-105.65,-3.5E-02)); +#306937 = VECTOR('',#306938,1.); +#306938 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#306939 = ORIENTED_EDGE('',*,*,#306940,.F.); +#306940 = EDGE_CURVE('',#306941,#306933,#306943,.T.); +#306941 = VERTEX_POINT('',#306942); +#306942 = CARTESIAN_POINT('',(128.238006,-105.682628,0.)); +#306943 = LINE('',#306944,#306945); +#306944 = CARTESIAN_POINT('',(128.238006,-105.682628,0.)); +#306945 = VECTOR('',#306946,1.); +#306946 = DIRECTION('',(0.,0.,-1.)); +#306947 = ORIENTED_EDGE('',*,*,#306948,.F.); +#306948 = EDGE_CURVE('',#306910,#306941,#306949,.T.); +#306949 = LINE('',#306950,#306951); +#306950 = CARTESIAN_POINT('',(128.256844,-105.65,0.)); +#306951 = VECTOR('',#306952,1.); +#306952 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#306953 = PLANE('',#306954); +#306954 = AXIS2_PLACEMENT_3D('',#306955,#306956,#306957); +#306955 = CARTESIAN_POINT('',(128.256844,-105.65,0.)); +#306956 = DIRECTION('',(-0.866022927953,0.500004288242,0.)); +#306957 = DIRECTION('',(-0.500004288242,-0.866022927953,0.)); +#306958 = ADVANCED_FACE('',(#306959),#306986,.T.); +#306959 = FACE_BOUND('',#306960,.F.); +#306960 = EDGE_LOOP('',(#306961,#306962,#306971,#306979)); +#306961 = ORIENTED_EDGE('',*,*,#306940,.T.); +#306962 = ORIENTED_EDGE('',*,*,#306963,.T.); +#306963 = EDGE_CURVE('',#306933,#306964,#306966,.T.); +#306964 = VERTEX_POINT('',#306965); +#306965 = CARTESIAN_POINT('',(128.238006,-105.317372,-3.5E-02)); +#306966 = CIRCLE('',#306967,0.299999737367); +#306967 = AXIS2_PLACEMENT_3D('',#306968,#306969,#306970); +#306968 = CARTESIAN_POINT('',(128.,-105.5,-3.5E-02)); +#306969 = DIRECTION('',(0.,0.,-1.)); +#306970 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#306971 = ORIENTED_EDGE('',*,*,#306972,.F.); +#306972 = EDGE_CURVE('',#306973,#306964,#306975,.T.); +#306973 = VERTEX_POINT('',#306974); +#306974 = CARTESIAN_POINT('',(128.238006,-105.317372,0.)); +#306975 = LINE('',#306976,#306977); +#306976 = CARTESIAN_POINT('',(128.238006,-105.317372,0.)); +#306977 = VECTOR('',#306978,1.); +#306978 = DIRECTION('',(0.,0.,-1.)); +#306979 = ORIENTED_EDGE('',*,*,#306980,.F.); +#306980 = EDGE_CURVE('',#306941,#306973,#306981,.T.); +#306981 = CIRCLE('',#306982,0.299999737367); +#306982 = AXIS2_PLACEMENT_3D('',#306983,#306984,#306985); +#306983 = CARTESIAN_POINT('',(128.,-105.5,0.)); +#306984 = DIRECTION('',(0.,0.,-1.)); +#306985 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#306986 = CYLINDRICAL_SURFACE('',#306987,0.299999737367); +#306987 = AXIS2_PLACEMENT_3D('',#306988,#306989,#306990); +#306988 = CARTESIAN_POINT('',(128.,-105.5,0.)); +#306989 = DIRECTION('',(-0.,-0.,1.)); +#306990 = DIRECTION('',(0.793354027871,-0.608760532936,0.)); +#306991 = ADVANCED_FACE('',(#306992),#307008,.F.); +#306992 = FACE_BOUND('',#306993,.F.); +#306993 = EDGE_LOOP('',(#306994,#306995,#307001,#307002)); +#306994 = ORIENTED_EDGE('',*,*,#306972,.T.); +#306995 = ORIENTED_EDGE('',*,*,#306996,.T.); +#306996 = EDGE_CURVE('',#306964,#306830,#306997,.T.); +#306997 = LINE('',#306998,#306999); +#306998 = CARTESIAN_POINT('',(128.238006,-105.317372,-3.5E-02)); +#306999 = VECTOR('',#307000,1.); +#307000 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#307001 = ORIENTED_EDGE('',*,*,#306827,.F.); +#307002 = ORIENTED_EDGE('',*,*,#307003,.F.); +#307003 = EDGE_CURVE('',#306973,#306828,#307004,.T.); +#307004 = LINE('',#307005,#307006); +#307005 = CARTESIAN_POINT('',(128.238006,-105.317372,0.)); +#307006 = VECTOR('',#307007,1.); +#307007 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#307008 = PLANE('',#307009); +#307009 = AXIS2_PLACEMENT_3D('',#307010,#307011,#307012); +#307010 = CARTESIAN_POINT('',(128.238006,-105.317372,0.)); +#307011 = DIRECTION('',(-0.866022927953,-0.500004288242,-0.)); +#307012 = DIRECTION('',(0.500004288242,-0.866022927953,0.)); +#307013 = ADVANCED_FACE('',(#307014),#307041,.F.); +#307014 = FACE_BOUND('',#307015,.F.); +#307015 = EDGE_LOOP('',(#307016,#307026,#307033,#307034)); +#307016 = ORIENTED_EDGE('',*,*,#307017,.T.); +#307017 = EDGE_CURVE('',#307018,#307020,#307022,.T.); +#307018 = VERTEX_POINT('',#307019); +#307019 = CARTESIAN_POINT('',(128.137255,-105.5,0.)); +#307020 = VERTEX_POINT('',#307021); +#307021 = CARTESIAN_POINT('',(128.137255,-105.5,-3.5E-02)); +#307022 = LINE('',#307023,#307024); +#307023 = CARTESIAN_POINT('',(128.137255,-105.5,0.)); +#307024 = VECTOR('',#307025,1.); +#307025 = DIRECTION('',(0.,0.,-1.)); +#307026 = ORIENTED_EDGE('',*,*,#307027,.T.); +#307027 = EDGE_CURVE('',#307020,#307020,#307028,.T.); +#307028 = CIRCLE('',#307029,0.137255); +#307029 = AXIS2_PLACEMENT_3D('',#307030,#307031,#307032); +#307030 = CARTESIAN_POINT('',(128.,-105.5,-3.5E-02)); +#307031 = DIRECTION('',(0.,0.,1.)); +#307032 = DIRECTION('',(1.,0.,-0.)); +#307033 = ORIENTED_EDGE('',*,*,#307017,.F.); +#307034 = ORIENTED_EDGE('',*,*,#307035,.F.); +#307035 = EDGE_CURVE('',#307018,#307018,#307036,.T.); +#307036 = CIRCLE('',#307037,0.137255); +#307037 = AXIS2_PLACEMENT_3D('',#307038,#307039,#307040); +#307038 = CARTESIAN_POINT('',(128.,-105.5,0.)); +#307039 = DIRECTION('',(0.,0.,1.)); +#307040 = DIRECTION('',(1.,0.,-0.)); +#307041 = CYLINDRICAL_SURFACE('',#307042,0.137255); +#307042 = AXIS2_PLACEMENT_3D('',#307043,#307044,#307045); +#307043 = CARTESIAN_POINT('',(128.,-105.5,0.)); +#307044 = DIRECTION('',(0.,0.,1.)); +#307045 = DIRECTION('',(1.,0.,-0.)); +#307046 = ADVANCED_FACE('',(#307047,#307055),#307058,.F.); +#307047 = FACE_BOUND('',#307048,.F.); +#307048 = EDGE_LOOP('',(#307049,#307050,#307051,#307052,#307053,#307054) + ); +#307049 = ORIENTED_EDGE('',*,*,#306853,.T.); +#307050 = ORIENTED_EDGE('',*,*,#306885,.T.); +#307051 = ORIENTED_EDGE('',*,*,#306917,.T.); +#307052 = ORIENTED_EDGE('',*,*,#306948,.T.); +#307053 = ORIENTED_EDGE('',*,*,#306980,.T.); +#307054 = ORIENTED_EDGE('',*,*,#307003,.T.); +#307055 = FACE_BOUND('',#307056,.F.); +#307056 = EDGE_LOOP('',(#307057)); +#307057 = ORIENTED_EDGE('',*,*,#307035,.T.); +#307058 = PLANE('',#307059); +#307059 = AXIS2_PLACEMENT_3D('',#307060,#307061,#307062); +#307060 = CARTESIAN_POINT('',(0.,0.,0.)); +#307061 = DIRECTION('',(-0.,-0.,-1.)); +#307062 = DIRECTION('',(-1.,0.,0.)); +#307063 = ADVANCED_FACE('',(#307064,#307072),#307075,.T.); +#307064 = FACE_BOUND('',#307065,.T.); +#307065 = EDGE_LOOP('',(#307066,#307067,#307068,#307069,#307070,#307071) + ); +#307066 = ORIENTED_EDGE('',*,*,#306837,.T.); +#307067 = ORIENTED_EDGE('',*,*,#306868,.T.); +#307068 = ORIENTED_EDGE('',*,*,#306901,.T.); +#307069 = ORIENTED_EDGE('',*,*,#306932,.T.); +#307070 = ORIENTED_EDGE('',*,*,#306963,.T.); +#307071 = ORIENTED_EDGE('',*,*,#306996,.T.); +#307072 = FACE_BOUND('',#307073,.T.); +#307073 = EDGE_LOOP('',(#307074)); +#307074 = ORIENTED_EDGE('',*,*,#307027,.T.); +#307075 = PLANE('',#307076); +#307076 = AXIS2_PLACEMENT_3D('',#307077,#307078,#307079); +#307077 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307078 = DIRECTION('',(-0.,-0.,-1.)); +#307079 = DIRECTION('',(-1.,0.,0.)); +#307080 = MANIFOLD_SOLID_BREP('',#307081); +#307081 = CLOSED_SHELL('',(#307082,#307115,#307148,#307160)); +#307082 = ADVANCED_FACE('',(#307083),#307110,.T.); +#307083 = FACE_BOUND('',#307084,.T.); +#307084 = EDGE_LOOP('',(#307085,#307095,#307102,#307103)); +#307085 = ORIENTED_EDGE('',*,*,#307086,.T.); +#307086 = EDGE_CURVE('',#307087,#307089,#307091,.T.); +#307087 = VERTEX_POINT('',#307088); +#307088 = CARTESIAN_POINT('',(135.3,-104.,0.)); +#307089 = VERTEX_POINT('',#307090); +#307090 = CARTESIAN_POINT('',(135.3,-104.,-3.5E-02)); +#307091 = LINE('',#307092,#307093); +#307092 = CARTESIAN_POINT('',(135.3,-104.,0.)); +#307093 = VECTOR('',#307094,1.); +#307094 = DIRECTION('',(0.,0.,-1.)); +#307095 = ORIENTED_EDGE('',*,*,#307096,.T.); +#307096 = EDGE_CURVE('',#307089,#307089,#307097,.T.); +#307097 = CIRCLE('',#307098,0.3); +#307098 = AXIS2_PLACEMENT_3D('',#307099,#307100,#307101); +#307099 = CARTESIAN_POINT('',(135.,-104.,-3.5E-02)); +#307100 = DIRECTION('',(0.,0.,1.)); +#307101 = DIRECTION('',(1.,0.,-0.)); +#307102 = ORIENTED_EDGE('',*,*,#307086,.F.); +#307103 = ORIENTED_EDGE('',*,*,#307104,.F.); +#307104 = EDGE_CURVE('',#307087,#307087,#307105,.T.); +#307105 = CIRCLE('',#307106,0.3); +#307106 = AXIS2_PLACEMENT_3D('',#307107,#307108,#307109); +#307107 = CARTESIAN_POINT('',(135.,-104.,0.)); +#307108 = DIRECTION('',(0.,0.,1.)); +#307109 = DIRECTION('',(1.,0.,-0.)); +#307110 = CYLINDRICAL_SURFACE('',#307111,0.3); +#307111 = AXIS2_PLACEMENT_3D('',#307112,#307113,#307114); +#307112 = CARTESIAN_POINT('',(135.,-104.,0.)); +#307113 = DIRECTION('',(0.,0.,1.)); +#307114 = DIRECTION('',(1.,0.,-0.)); +#307115 = ADVANCED_FACE('',(#307116),#307143,.F.); +#307116 = FACE_BOUND('',#307117,.F.); +#307117 = EDGE_LOOP('',(#307118,#307128,#307135,#307136)); +#307118 = ORIENTED_EDGE('',*,*,#307119,.T.); +#307119 = EDGE_CURVE('',#307120,#307122,#307124,.T.); +#307120 = VERTEX_POINT('',#307121); +#307121 = CARTESIAN_POINT('',(135.137255,-104.,0.)); +#307122 = VERTEX_POINT('',#307123); +#307123 = CARTESIAN_POINT('',(135.137255,-104.,-3.5E-02)); +#307124 = LINE('',#307125,#307126); +#307125 = CARTESIAN_POINT('',(135.137255,-104.,0.)); +#307126 = VECTOR('',#307127,1.); +#307127 = DIRECTION('',(0.,0.,-1.)); +#307128 = ORIENTED_EDGE('',*,*,#307129,.T.); +#307129 = EDGE_CURVE('',#307122,#307122,#307130,.T.); +#307130 = CIRCLE('',#307131,0.137255); +#307131 = AXIS2_PLACEMENT_3D('',#307132,#307133,#307134); +#307132 = CARTESIAN_POINT('',(135.,-104.,-3.5E-02)); +#307133 = DIRECTION('',(0.,0.,1.)); +#307134 = DIRECTION('',(1.,0.,-0.)); +#307135 = ORIENTED_EDGE('',*,*,#307119,.F.); +#307136 = ORIENTED_EDGE('',*,*,#307137,.F.); +#307137 = EDGE_CURVE('',#307120,#307120,#307138,.T.); +#307138 = CIRCLE('',#307139,0.137255); +#307139 = AXIS2_PLACEMENT_3D('',#307140,#307141,#307142); +#307140 = CARTESIAN_POINT('',(135.,-104.,0.)); +#307141 = DIRECTION('',(0.,0.,1.)); +#307142 = DIRECTION('',(1.,0.,-0.)); +#307143 = CYLINDRICAL_SURFACE('',#307144,0.137255); +#307144 = AXIS2_PLACEMENT_3D('',#307145,#307146,#307147); +#307145 = CARTESIAN_POINT('',(135.,-104.,0.)); +#307146 = DIRECTION('',(0.,0.,1.)); +#307147 = DIRECTION('',(1.,0.,-0.)); +#307148 = ADVANCED_FACE('',(#307149,#307152),#307155,.F.); +#307149 = FACE_BOUND('',#307150,.T.); +#307150 = EDGE_LOOP('',(#307151)); +#307151 = ORIENTED_EDGE('',*,*,#307104,.T.); +#307152 = FACE_BOUND('',#307153,.F.); +#307153 = EDGE_LOOP('',(#307154)); +#307154 = ORIENTED_EDGE('',*,*,#307137,.T.); +#307155 = PLANE('',#307156); +#307156 = AXIS2_PLACEMENT_3D('',#307157,#307158,#307159); +#307157 = CARTESIAN_POINT('',(0.,0.,0.)); +#307158 = DIRECTION('',(-0.,-0.,-1.)); +#307159 = DIRECTION('',(-1.,0.,0.)); +#307160 = ADVANCED_FACE('',(#307161,#307164),#307167,.T.); +#307161 = FACE_BOUND('',#307162,.F.); +#307162 = EDGE_LOOP('',(#307163)); +#307163 = ORIENTED_EDGE('',*,*,#307096,.T.); +#307164 = FACE_BOUND('',#307165,.T.); +#307165 = EDGE_LOOP('',(#307166)); +#307166 = ORIENTED_EDGE('',*,*,#307129,.T.); +#307167 = PLANE('',#307168); +#307168 = AXIS2_PLACEMENT_3D('',#307169,#307170,#307171); +#307169 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307170 = DIRECTION('',(-0.,-0.,-1.)); +#307171 = DIRECTION('',(-1.,0.,0.)); +#307172 = MANIFOLD_SOLID_BREP('',#307173); +#307173 = CLOSED_SHELL('',(#307174,#307207,#307240,#307252)); +#307174 = ADVANCED_FACE('',(#307175),#307202,.T.); +#307175 = FACE_BOUND('',#307176,.T.); +#307176 = EDGE_LOOP('',(#307177,#307187,#307194,#307195)); +#307177 = ORIENTED_EDGE('',*,*,#307178,.T.); +#307178 = EDGE_CURVE('',#307179,#307181,#307183,.T.); +#307179 = VERTEX_POINT('',#307180); +#307180 = CARTESIAN_POINT('',(124.8,-100.5,0.)); +#307181 = VERTEX_POINT('',#307182); +#307182 = CARTESIAN_POINT('',(124.8,-100.5,-3.5E-02)); +#307183 = LINE('',#307184,#307185); +#307184 = CARTESIAN_POINT('',(124.8,-100.5,0.)); +#307185 = VECTOR('',#307186,1.); +#307186 = DIRECTION('',(0.,0.,-1.)); +#307187 = ORIENTED_EDGE('',*,*,#307188,.T.); +#307188 = EDGE_CURVE('',#307181,#307181,#307189,.T.); +#307189 = CIRCLE('',#307190,0.3); +#307190 = AXIS2_PLACEMENT_3D('',#307191,#307192,#307193); +#307191 = CARTESIAN_POINT('',(124.5,-100.5,-3.5E-02)); +#307192 = DIRECTION('',(0.,0.,1.)); +#307193 = DIRECTION('',(1.,0.,-0.)); +#307194 = ORIENTED_EDGE('',*,*,#307178,.F.); +#307195 = ORIENTED_EDGE('',*,*,#307196,.F.); +#307196 = EDGE_CURVE('',#307179,#307179,#307197,.T.); +#307197 = CIRCLE('',#307198,0.3); +#307198 = AXIS2_PLACEMENT_3D('',#307199,#307200,#307201); +#307199 = CARTESIAN_POINT('',(124.5,-100.5,0.)); +#307200 = DIRECTION('',(0.,0.,1.)); +#307201 = DIRECTION('',(1.,0.,-0.)); +#307202 = CYLINDRICAL_SURFACE('',#307203,0.3); +#307203 = AXIS2_PLACEMENT_3D('',#307204,#307205,#307206); +#307204 = CARTESIAN_POINT('',(124.5,-100.5,0.)); +#307205 = DIRECTION('',(0.,0.,1.)); +#307206 = DIRECTION('',(1.,0.,-0.)); +#307207 = ADVANCED_FACE('',(#307208),#307235,.F.); +#307208 = FACE_BOUND('',#307209,.F.); +#307209 = EDGE_LOOP('',(#307210,#307220,#307227,#307228)); +#307210 = ORIENTED_EDGE('',*,*,#307211,.T.); +#307211 = EDGE_CURVE('',#307212,#307214,#307216,.T.); +#307212 = VERTEX_POINT('',#307213); +#307213 = CARTESIAN_POINT('',(124.637255,-100.5,0.)); +#307214 = VERTEX_POINT('',#307215); +#307215 = CARTESIAN_POINT('',(124.637255,-100.5,-3.5E-02)); +#307216 = LINE('',#307217,#307218); +#307217 = CARTESIAN_POINT('',(124.637255,-100.5,0.)); +#307218 = VECTOR('',#307219,1.); +#307219 = DIRECTION('',(0.,0.,-1.)); +#307220 = ORIENTED_EDGE('',*,*,#307221,.T.); +#307221 = EDGE_CURVE('',#307214,#307214,#307222,.T.); +#307222 = CIRCLE('',#307223,0.137255); +#307223 = AXIS2_PLACEMENT_3D('',#307224,#307225,#307226); +#307224 = CARTESIAN_POINT('',(124.5,-100.5,-3.5E-02)); +#307225 = DIRECTION('',(0.,0.,1.)); +#307226 = DIRECTION('',(1.,0.,-0.)); +#307227 = ORIENTED_EDGE('',*,*,#307211,.F.); +#307228 = ORIENTED_EDGE('',*,*,#307229,.F.); +#307229 = EDGE_CURVE('',#307212,#307212,#307230,.T.); +#307230 = CIRCLE('',#307231,0.137255); +#307231 = AXIS2_PLACEMENT_3D('',#307232,#307233,#307234); +#307232 = CARTESIAN_POINT('',(124.5,-100.5,0.)); +#307233 = DIRECTION('',(0.,0.,1.)); +#307234 = DIRECTION('',(1.,0.,-0.)); +#307235 = CYLINDRICAL_SURFACE('',#307236,0.137255); +#307236 = AXIS2_PLACEMENT_3D('',#307237,#307238,#307239); +#307237 = CARTESIAN_POINT('',(124.5,-100.5,0.)); +#307238 = DIRECTION('',(0.,0.,1.)); +#307239 = DIRECTION('',(1.,0.,-0.)); +#307240 = ADVANCED_FACE('',(#307241,#307244),#307247,.F.); +#307241 = FACE_BOUND('',#307242,.T.); +#307242 = EDGE_LOOP('',(#307243)); +#307243 = ORIENTED_EDGE('',*,*,#307196,.T.); +#307244 = FACE_BOUND('',#307245,.F.); +#307245 = EDGE_LOOP('',(#307246)); +#307246 = ORIENTED_EDGE('',*,*,#307229,.T.); +#307247 = PLANE('',#307248); +#307248 = AXIS2_PLACEMENT_3D('',#307249,#307250,#307251); +#307249 = CARTESIAN_POINT('',(0.,0.,0.)); +#307250 = DIRECTION('',(-0.,-0.,-1.)); +#307251 = DIRECTION('',(-1.,0.,0.)); +#307252 = ADVANCED_FACE('',(#307253,#307256),#307259,.T.); +#307253 = FACE_BOUND('',#307254,.F.); +#307254 = EDGE_LOOP('',(#307255)); +#307255 = ORIENTED_EDGE('',*,*,#307188,.T.); +#307256 = FACE_BOUND('',#307257,.T.); +#307257 = EDGE_LOOP('',(#307258)); +#307258 = ORIENTED_EDGE('',*,*,#307221,.T.); +#307259 = PLANE('',#307260); +#307260 = AXIS2_PLACEMENT_3D('',#307261,#307262,#307263); +#307261 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307262 = DIRECTION('',(-0.,-0.,-1.)); +#307263 = DIRECTION('',(-1.,0.,0.)); +#307264 = MANIFOLD_SOLID_BREP('',#307265); +#307265 = CLOSED_SHELL('',(#307266,#307299,#307332,#307344)); +#307266 = ADVANCED_FACE('',(#307267),#307294,.T.); +#307267 = FACE_BOUND('',#307268,.T.); +#307268 = EDGE_LOOP('',(#307269,#307279,#307286,#307287)); +#307269 = ORIENTED_EDGE('',*,*,#307270,.T.); +#307270 = EDGE_CURVE('',#307271,#307273,#307275,.T.); +#307271 = VERTEX_POINT('',#307272); +#307272 = CARTESIAN_POINT('',(150.8,-100.5,0.)); +#307273 = VERTEX_POINT('',#307274); +#307274 = CARTESIAN_POINT('',(150.8,-100.5,-3.5E-02)); +#307275 = LINE('',#307276,#307277); +#307276 = CARTESIAN_POINT('',(150.8,-100.5,0.)); +#307277 = VECTOR('',#307278,1.); +#307278 = DIRECTION('',(0.,0.,-1.)); +#307279 = ORIENTED_EDGE('',*,*,#307280,.T.); +#307280 = EDGE_CURVE('',#307273,#307273,#307281,.T.); +#307281 = CIRCLE('',#307282,0.3); +#307282 = AXIS2_PLACEMENT_3D('',#307283,#307284,#307285); +#307283 = CARTESIAN_POINT('',(150.5,-100.5,-3.5E-02)); +#307284 = DIRECTION('',(0.,0.,1.)); +#307285 = DIRECTION('',(1.,0.,-0.)); +#307286 = ORIENTED_EDGE('',*,*,#307270,.F.); +#307287 = ORIENTED_EDGE('',*,*,#307288,.F.); +#307288 = EDGE_CURVE('',#307271,#307271,#307289,.T.); +#307289 = CIRCLE('',#307290,0.3); +#307290 = AXIS2_PLACEMENT_3D('',#307291,#307292,#307293); +#307291 = CARTESIAN_POINT('',(150.5,-100.5,0.)); +#307292 = DIRECTION('',(0.,0.,1.)); +#307293 = DIRECTION('',(1.,0.,-0.)); +#307294 = CYLINDRICAL_SURFACE('',#307295,0.3); +#307295 = AXIS2_PLACEMENT_3D('',#307296,#307297,#307298); +#307296 = CARTESIAN_POINT('',(150.5,-100.5,0.)); +#307297 = DIRECTION('',(0.,0.,1.)); +#307298 = DIRECTION('',(1.,0.,-0.)); +#307299 = ADVANCED_FACE('',(#307300),#307327,.F.); +#307300 = FACE_BOUND('',#307301,.F.); +#307301 = EDGE_LOOP('',(#307302,#307312,#307319,#307320)); +#307302 = ORIENTED_EDGE('',*,*,#307303,.T.); +#307303 = EDGE_CURVE('',#307304,#307306,#307308,.T.); +#307304 = VERTEX_POINT('',#307305); +#307305 = CARTESIAN_POINT('',(150.637255,-100.5,0.)); +#307306 = VERTEX_POINT('',#307307); +#307307 = CARTESIAN_POINT('',(150.637255,-100.5,-3.5E-02)); +#307308 = LINE('',#307309,#307310); +#307309 = CARTESIAN_POINT('',(150.637255,-100.5,0.)); +#307310 = VECTOR('',#307311,1.); +#307311 = DIRECTION('',(0.,0.,-1.)); +#307312 = ORIENTED_EDGE('',*,*,#307313,.T.); +#307313 = EDGE_CURVE('',#307306,#307306,#307314,.T.); +#307314 = CIRCLE('',#307315,0.137255); +#307315 = AXIS2_PLACEMENT_3D('',#307316,#307317,#307318); +#307316 = CARTESIAN_POINT('',(150.5,-100.5,-3.5E-02)); +#307317 = DIRECTION('',(0.,0.,1.)); +#307318 = DIRECTION('',(1.,0.,-0.)); +#307319 = ORIENTED_EDGE('',*,*,#307303,.F.); +#307320 = ORIENTED_EDGE('',*,*,#307321,.F.); +#307321 = EDGE_CURVE('',#307304,#307304,#307322,.T.); +#307322 = CIRCLE('',#307323,0.137255); +#307323 = AXIS2_PLACEMENT_3D('',#307324,#307325,#307326); +#307324 = CARTESIAN_POINT('',(150.5,-100.5,0.)); +#307325 = DIRECTION('',(0.,0.,1.)); +#307326 = DIRECTION('',(1.,0.,-0.)); +#307327 = CYLINDRICAL_SURFACE('',#307328,0.137255); +#307328 = AXIS2_PLACEMENT_3D('',#307329,#307330,#307331); +#307329 = CARTESIAN_POINT('',(150.5,-100.5,0.)); +#307330 = DIRECTION('',(0.,0.,1.)); +#307331 = DIRECTION('',(1.,0.,-0.)); +#307332 = ADVANCED_FACE('',(#307333,#307336),#307339,.F.); +#307333 = FACE_BOUND('',#307334,.T.); +#307334 = EDGE_LOOP('',(#307335)); +#307335 = ORIENTED_EDGE('',*,*,#307288,.T.); +#307336 = FACE_BOUND('',#307337,.F.); +#307337 = EDGE_LOOP('',(#307338)); +#307338 = ORIENTED_EDGE('',*,*,#307321,.T.); +#307339 = PLANE('',#307340); +#307340 = AXIS2_PLACEMENT_3D('',#307341,#307342,#307343); +#307341 = CARTESIAN_POINT('',(0.,0.,0.)); +#307342 = DIRECTION('',(-0.,-0.,-1.)); +#307343 = DIRECTION('',(-1.,0.,0.)); +#307344 = ADVANCED_FACE('',(#307345,#307348),#307351,.T.); +#307345 = FACE_BOUND('',#307346,.F.); +#307346 = EDGE_LOOP('',(#307347)); +#307347 = ORIENTED_EDGE('',*,*,#307280,.T.); +#307348 = FACE_BOUND('',#307349,.T.); +#307349 = EDGE_LOOP('',(#307350)); +#307350 = ORIENTED_EDGE('',*,*,#307313,.T.); +#307351 = PLANE('',#307352); +#307352 = AXIS2_PLACEMENT_3D('',#307353,#307354,#307355); +#307353 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307354 = DIRECTION('',(-0.,-0.,-1.)); +#307355 = DIRECTION('',(-1.,0.,0.)); +#307356 = MANIFOLD_SOLID_BREP('',#307357); +#307357 = CLOSED_SHELL('',(#307358,#307391,#307424,#307436)); +#307358 = ADVANCED_FACE('',(#307359),#307386,.T.); +#307359 = FACE_BOUND('',#307360,.T.); +#307360 = EDGE_LOOP('',(#307361,#307371,#307378,#307379)); +#307361 = ORIENTED_EDGE('',*,*,#307362,.T.); +#307362 = EDGE_CURVE('',#307363,#307365,#307367,.T.); +#307363 = VERTEX_POINT('',#307364); +#307364 = CARTESIAN_POINT('',(147.8,-96.5,0.)); +#307365 = VERTEX_POINT('',#307366); +#307366 = CARTESIAN_POINT('',(147.8,-96.5,-3.5E-02)); +#307367 = LINE('',#307368,#307369); +#307368 = CARTESIAN_POINT('',(147.8,-96.5,0.)); +#307369 = VECTOR('',#307370,1.); +#307370 = DIRECTION('',(0.,0.,-1.)); +#307371 = ORIENTED_EDGE('',*,*,#307372,.T.); +#307372 = EDGE_CURVE('',#307365,#307365,#307373,.T.); +#307373 = CIRCLE('',#307374,0.3); +#307374 = AXIS2_PLACEMENT_3D('',#307375,#307376,#307377); +#307375 = CARTESIAN_POINT('',(147.5,-96.5,-3.5E-02)); +#307376 = DIRECTION('',(0.,0.,1.)); +#307377 = DIRECTION('',(1.,0.,-0.)); +#307378 = ORIENTED_EDGE('',*,*,#307362,.F.); +#307379 = ORIENTED_EDGE('',*,*,#307380,.F.); +#307380 = EDGE_CURVE('',#307363,#307363,#307381,.T.); +#307381 = CIRCLE('',#307382,0.3); +#307382 = AXIS2_PLACEMENT_3D('',#307383,#307384,#307385); +#307383 = CARTESIAN_POINT('',(147.5,-96.5,0.)); +#307384 = DIRECTION('',(0.,0.,1.)); +#307385 = DIRECTION('',(1.,0.,-0.)); +#307386 = CYLINDRICAL_SURFACE('',#307387,0.3); +#307387 = AXIS2_PLACEMENT_3D('',#307388,#307389,#307390); +#307388 = CARTESIAN_POINT('',(147.5,-96.5,0.)); +#307389 = DIRECTION('',(0.,0.,1.)); +#307390 = DIRECTION('',(1.,0.,-0.)); +#307391 = ADVANCED_FACE('',(#307392),#307419,.F.); +#307392 = FACE_BOUND('',#307393,.F.); +#307393 = EDGE_LOOP('',(#307394,#307404,#307411,#307412)); +#307394 = ORIENTED_EDGE('',*,*,#307395,.T.); +#307395 = EDGE_CURVE('',#307396,#307398,#307400,.T.); +#307396 = VERTEX_POINT('',#307397); +#307397 = CARTESIAN_POINT('',(147.637255,-96.5,0.)); +#307398 = VERTEX_POINT('',#307399); +#307399 = CARTESIAN_POINT('',(147.637255,-96.5,-3.5E-02)); +#307400 = LINE('',#307401,#307402); +#307401 = CARTESIAN_POINT('',(147.637255,-96.5,0.)); +#307402 = VECTOR('',#307403,1.); +#307403 = DIRECTION('',(0.,0.,-1.)); +#307404 = ORIENTED_EDGE('',*,*,#307405,.T.); +#307405 = EDGE_CURVE('',#307398,#307398,#307406,.T.); +#307406 = CIRCLE('',#307407,0.137255); +#307407 = AXIS2_PLACEMENT_3D('',#307408,#307409,#307410); +#307408 = CARTESIAN_POINT('',(147.5,-96.5,-3.5E-02)); +#307409 = DIRECTION('',(0.,0.,1.)); +#307410 = DIRECTION('',(1.,0.,-0.)); +#307411 = ORIENTED_EDGE('',*,*,#307395,.F.); +#307412 = ORIENTED_EDGE('',*,*,#307413,.F.); +#307413 = EDGE_CURVE('',#307396,#307396,#307414,.T.); +#307414 = CIRCLE('',#307415,0.137255); +#307415 = AXIS2_PLACEMENT_3D('',#307416,#307417,#307418); +#307416 = CARTESIAN_POINT('',(147.5,-96.5,0.)); +#307417 = DIRECTION('',(0.,0.,1.)); +#307418 = DIRECTION('',(1.,0.,-0.)); +#307419 = CYLINDRICAL_SURFACE('',#307420,0.137255); +#307420 = AXIS2_PLACEMENT_3D('',#307421,#307422,#307423); +#307421 = CARTESIAN_POINT('',(147.5,-96.5,0.)); +#307422 = DIRECTION('',(0.,0.,1.)); +#307423 = DIRECTION('',(1.,0.,-0.)); +#307424 = ADVANCED_FACE('',(#307425,#307428),#307431,.F.); +#307425 = FACE_BOUND('',#307426,.T.); +#307426 = EDGE_LOOP('',(#307427)); +#307427 = ORIENTED_EDGE('',*,*,#307380,.T.); +#307428 = FACE_BOUND('',#307429,.F.); +#307429 = EDGE_LOOP('',(#307430)); +#307430 = ORIENTED_EDGE('',*,*,#307413,.T.); +#307431 = PLANE('',#307432); +#307432 = AXIS2_PLACEMENT_3D('',#307433,#307434,#307435); +#307433 = CARTESIAN_POINT('',(0.,0.,0.)); +#307434 = DIRECTION('',(-0.,-0.,-1.)); +#307435 = DIRECTION('',(-1.,0.,0.)); +#307436 = ADVANCED_FACE('',(#307437,#307440),#307443,.T.); +#307437 = FACE_BOUND('',#307438,.F.); +#307438 = EDGE_LOOP('',(#307439)); +#307439 = ORIENTED_EDGE('',*,*,#307372,.T.); +#307440 = FACE_BOUND('',#307441,.T.); +#307441 = EDGE_LOOP('',(#307442)); +#307442 = ORIENTED_EDGE('',*,*,#307405,.T.); +#307443 = PLANE('',#307444); +#307444 = AXIS2_PLACEMENT_3D('',#307445,#307446,#307447); +#307445 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307446 = DIRECTION('',(-0.,-0.,-1.)); +#307447 = DIRECTION('',(-1.,0.,0.)); +#307448 = MANIFOLD_SOLID_BREP('',#307449); +#307449 = CLOSED_SHELL('',(#307450,#307483,#307516,#307528)); +#307450 = ADVANCED_FACE('',(#307451),#307478,.T.); +#307451 = FACE_BOUND('',#307452,.T.); +#307452 = EDGE_LOOP('',(#307453,#307463,#307470,#307471)); +#307453 = ORIENTED_EDGE('',*,*,#307454,.T.); +#307454 = EDGE_CURVE('',#307455,#307457,#307459,.T.); +#307455 = VERTEX_POINT('',#307456); +#307456 = CARTESIAN_POINT('',(124.388235,-90.513235,0.)); +#307457 = VERTEX_POINT('',#307458); +#307458 = CARTESIAN_POINT('',(124.388235,-90.513235,-3.5E-02)); +#307459 = LINE('',#307460,#307461); +#307460 = CARTESIAN_POINT('',(124.388235,-90.513235,0.)); +#307461 = VECTOR('',#307462,1.); +#307462 = DIRECTION('',(0.,0.,-1.)); +#307463 = ORIENTED_EDGE('',*,*,#307464,.T.); +#307464 = EDGE_CURVE('',#307457,#307457,#307465,.T.); +#307465 = CIRCLE('',#307466,0.3); +#307466 = AXIS2_PLACEMENT_3D('',#307467,#307468,#307469); +#307467 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.5E-02)); +#307468 = DIRECTION('',(0.,0.,1.)); +#307469 = DIRECTION('',(1.,0.,-0.)); +#307470 = ORIENTED_EDGE('',*,*,#307454,.F.); +#307471 = ORIENTED_EDGE('',*,*,#307472,.F.); +#307472 = EDGE_CURVE('',#307455,#307455,#307473,.T.); +#307473 = CIRCLE('',#307474,0.3); +#307474 = AXIS2_PLACEMENT_3D('',#307475,#307476,#307477); +#307475 = CARTESIAN_POINT('',(124.088235,-90.513235,0.)); +#307476 = DIRECTION('',(0.,0.,1.)); +#307477 = DIRECTION('',(1.,0.,-0.)); +#307478 = CYLINDRICAL_SURFACE('',#307479,0.3); +#307479 = AXIS2_PLACEMENT_3D('',#307480,#307481,#307482); +#307480 = CARTESIAN_POINT('',(124.088235,-90.513235,0.)); +#307481 = DIRECTION('',(0.,0.,1.)); +#307482 = DIRECTION('',(1.,0.,-0.)); +#307483 = ADVANCED_FACE('',(#307484),#307511,.F.); +#307484 = FACE_BOUND('',#307485,.F.); +#307485 = EDGE_LOOP('',(#307486,#307496,#307503,#307504)); +#307486 = ORIENTED_EDGE('',*,*,#307487,.T.); +#307487 = EDGE_CURVE('',#307488,#307490,#307492,.T.); +#307488 = VERTEX_POINT('',#307489); +#307489 = CARTESIAN_POINT('',(124.22549,-90.513235,0.)); +#307490 = VERTEX_POINT('',#307491); +#307491 = CARTESIAN_POINT('',(124.22549,-90.513235,-3.5E-02)); +#307492 = LINE('',#307493,#307494); +#307493 = CARTESIAN_POINT('',(124.22549,-90.513235,0.)); +#307494 = VECTOR('',#307495,1.); +#307495 = DIRECTION('',(0.,0.,-1.)); +#307496 = ORIENTED_EDGE('',*,*,#307497,.T.); +#307497 = EDGE_CURVE('',#307490,#307490,#307498,.T.); +#307498 = CIRCLE('',#307499,0.137255); +#307499 = AXIS2_PLACEMENT_3D('',#307500,#307501,#307502); +#307500 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.5E-02)); +#307501 = DIRECTION('',(0.,0.,1.)); +#307502 = DIRECTION('',(1.,0.,-0.)); +#307503 = ORIENTED_EDGE('',*,*,#307487,.F.); +#307504 = ORIENTED_EDGE('',*,*,#307505,.F.); +#307505 = EDGE_CURVE('',#307488,#307488,#307506,.T.); +#307506 = CIRCLE('',#307507,0.137255); +#307507 = AXIS2_PLACEMENT_3D('',#307508,#307509,#307510); +#307508 = CARTESIAN_POINT('',(124.088235,-90.513235,0.)); +#307509 = DIRECTION('',(0.,0.,1.)); +#307510 = DIRECTION('',(1.,0.,-0.)); +#307511 = CYLINDRICAL_SURFACE('',#307512,0.137255); +#307512 = AXIS2_PLACEMENT_3D('',#307513,#307514,#307515); +#307513 = CARTESIAN_POINT('',(124.088235,-90.513235,0.)); +#307514 = DIRECTION('',(0.,0.,1.)); +#307515 = DIRECTION('',(1.,0.,-0.)); +#307516 = ADVANCED_FACE('',(#307517,#307520),#307523,.F.); +#307517 = FACE_BOUND('',#307518,.T.); +#307518 = EDGE_LOOP('',(#307519)); +#307519 = ORIENTED_EDGE('',*,*,#307472,.T.); +#307520 = FACE_BOUND('',#307521,.F.); +#307521 = EDGE_LOOP('',(#307522)); +#307522 = ORIENTED_EDGE('',*,*,#307505,.T.); +#307523 = PLANE('',#307524); +#307524 = AXIS2_PLACEMENT_3D('',#307525,#307526,#307527); +#307525 = CARTESIAN_POINT('',(0.,0.,0.)); +#307526 = DIRECTION('',(-0.,-0.,-1.)); +#307527 = DIRECTION('',(-1.,0.,0.)); +#307528 = ADVANCED_FACE('',(#307529,#307532),#307535,.T.); +#307529 = FACE_BOUND('',#307530,.F.); +#307530 = EDGE_LOOP('',(#307531)); +#307531 = ORIENTED_EDGE('',*,*,#307464,.T.); +#307532 = FACE_BOUND('',#307533,.T.); +#307533 = EDGE_LOOP('',(#307534)); +#307534 = ORIENTED_EDGE('',*,*,#307497,.T.); +#307535 = PLANE('',#307536); +#307536 = AXIS2_PLACEMENT_3D('',#307537,#307538,#307539); +#307537 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307538 = DIRECTION('',(-0.,-0.,-1.)); +#307539 = DIRECTION('',(-1.,0.,0.)); +#307540 = MANIFOLD_SOLID_BREP('',#307541); +#307541 = CLOSED_SHELL('',(#307542,#307575,#307608,#307620)); +#307542 = ADVANCED_FACE('',(#307543),#307570,.T.); +#307543 = FACE_BOUND('',#307544,.T.); +#307544 = EDGE_LOOP('',(#307545,#307555,#307562,#307563)); +#307545 = ORIENTED_EDGE('',*,*,#307546,.T.); +#307546 = EDGE_CURVE('',#307547,#307549,#307551,.T.); +#307547 = VERTEX_POINT('',#307548); +#307548 = CARTESIAN_POINT('',(150.8,-90.5,0.)); +#307549 = VERTEX_POINT('',#307550); +#307550 = CARTESIAN_POINT('',(150.8,-90.5,-3.5E-02)); +#307551 = LINE('',#307552,#307553); +#307552 = CARTESIAN_POINT('',(150.8,-90.5,0.)); +#307553 = VECTOR('',#307554,1.); +#307554 = DIRECTION('',(0.,0.,-1.)); +#307555 = ORIENTED_EDGE('',*,*,#307556,.T.); +#307556 = EDGE_CURVE('',#307549,#307549,#307557,.T.); +#307557 = CIRCLE('',#307558,0.3); +#307558 = AXIS2_PLACEMENT_3D('',#307559,#307560,#307561); +#307559 = CARTESIAN_POINT('',(150.5,-90.5,-3.5E-02)); +#307560 = DIRECTION('',(0.,0.,1.)); +#307561 = DIRECTION('',(1.,0.,-0.)); +#307562 = ORIENTED_EDGE('',*,*,#307546,.F.); +#307563 = ORIENTED_EDGE('',*,*,#307564,.F.); +#307564 = EDGE_CURVE('',#307547,#307547,#307565,.T.); +#307565 = CIRCLE('',#307566,0.3); +#307566 = AXIS2_PLACEMENT_3D('',#307567,#307568,#307569); +#307567 = CARTESIAN_POINT('',(150.5,-90.5,0.)); +#307568 = DIRECTION('',(0.,0.,1.)); +#307569 = DIRECTION('',(1.,0.,-0.)); +#307570 = CYLINDRICAL_SURFACE('',#307571,0.3); +#307571 = AXIS2_PLACEMENT_3D('',#307572,#307573,#307574); +#307572 = CARTESIAN_POINT('',(150.5,-90.5,0.)); +#307573 = DIRECTION('',(0.,0.,1.)); +#307574 = DIRECTION('',(1.,0.,-0.)); +#307575 = ADVANCED_FACE('',(#307576),#307603,.F.); +#307576 = FACE_BOUND('',#307577,.F.); +#307577 = EDGE_LOOP('',(#307578,#307588,#307595,#307596)); +#307578 = ORIENTED_EDGE('',*,*,#307579,.T.); +#307579 = EDGE_CURVE('',#307580,#307582,#307584,.T.); +#307580 = VERTEX_POINT('',#307581); +#307581 = CARTESIAN_POINT('',(150.637255,-90.5,0.)); +#307582 = VERTEX_POINT('',#307583); +#307583 = CARTESIAN_POINT('',(150.637255,-90.5,-3.5E-02)); +#307584 = LINE('',#307585,#307586); +#307585 = CARTESIAN_POINT('',(150.637255,-90.5,0.)); +#307586 = VECTOR('',#307587,1.); +#307587 = DIRECTION('',(0.,0.,-1.)); +#307588 = ORIENTED_EDGE('',*,*,#307589,.T.); +#307589 = EDGE_CURVE('',#307582,#307582,#307590,.T.); +#307590 = CIRCLE('',#307591,0.137255); +#307591 = AXIS2_PLACEMENT_3D('',#307592,#307593,#307594); +#307592 = CARTESIAN_POINT('',(150.5,-90.5,-3.5E-02)); +#307593 = DIRECTION('',(0.,0.,1.)); +#307594 = DIRECTION('',(1.,0.,-0.)); +#307595 = ORIENTED_EDGE('',*,*,#307579,.F.); +#307596 = ORIENTED_EDGE('',*,*,#307597,.F.); +#307597 = EDGE_CURVE('',#307580,#307580,#307598,.T.); +#307598 = CIRCLE('',#307599,0.137255); +#307599 = AXIS2_PLACEMENT_3D('',#307600,#307601,#307602); +#307600 = CARTESIAN_POINT('',(150.5,-90.5,0.)); +#307601 = DIRECTION('',(0.,0.,1.)); +#307602 = DIRECTION('',(1.,0.,-0.)); +#307603 = CYLINDRICAL_SURFACE('',#307604,0.137255); +#307604 = AXIS2_PLACEMENT_3D('',#307605,#307606,#307607); +#307605 = CARTESIAN_POINT('',(150.5,-90.5,0.)); +#307606 = DIRECTION('',(0.,0.,1.)); +#307607 = DIRECTION('',(1.,0.,-0.)); +#307608 = ADVANCED_FACE('',(#307609,#307612),#307615,.F.); +#307609 = FACE_BOUND('',#307610,.T.); +#307610 = EDGE_LOOP('',(#307611)); +#307611 = ORIENTED_EDGE('',*,*,#307564,.T.); +#307612 = FACE_BOUND('',#307613,.F.); +#307613 = EDGE_LOOP('',(#307614)); +#307614 = ORIENTED_EDGE('',*,*,#307597,.T.); +#307615 = PLANE('',#307616); +#307616 = AXIS2_PLACEMENT_3D('',#307617,#307618,#307619); +#307617 = CARTESIAN_POINT('',(0.,0.,0.)); +#307618 = DIRECTION('',(-0.,-0.,-1.)); +#307619 = DIRECTION('',(-1.,0.,0.)); +#307620 = ADVANCED_FACE('',(#307621,#307624),#307627,.T.); +#307621 = FACE_BOUND('',#307622,.F.); +#307622 = EDGE_LOOP('',(#307623)); +#307623 = ORIENTED_EDGE('',*,*,#307556,.T.); +#307624 = FACE_BOUND('',#307625,.T.); +#307625 = EDGE_LOOP('',(#307626)); +#307626 = ORIENTED_EDGE('',*,*,#307589,.T.); +#307627 = PLANE('',#307628); +#307628 = AXIS2_PLACEMENT_3D('',#307629,#307630,#307631); +#307629 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307630 = DIRECTION('',(-0.,-0.,-1.)); +#307631 = DIRECTION('',(-1.,0.,0.)); +#307632 = MANIFOLD_SOLID_BREP('',#307633); +#307633 = CLOSED_SHELL('',(#307634,#307667,#307700,#307712)); +#307634 = ADVANCED_FACE('',(#307635),#307662,.T.); +#307635 = FACE_BOUND('',#307636,.T.); +#307636 = EDGE_LOOP('',(#307637,#307647,#307654,#307655)); +#307637 = ORIENTED_EDGE('',*,*,#307638,.T.); +#307638 = EDGE_CURVE('',#307639,#307641,#307643,.T.); +#307639 = VERTEX_POINT('',#307640); +#307640 = CARTESIAN_POINT('',(124.7,-88.,0.)); +#307641 = VERTEX_POINT('',#307642); +#307642 = CARTESIAN_POINT('',(124.7,-88.,-3.5E-02)); +#307643 = LINE('',#307644,#307645); +#307644 = CARTESIAN_POINT('',(124.7,-88.,0.)); +#307645 = VECTOR('',#307646,1.); +#307646 = DIRECTION('',(0.,0.,-1.)); +#307647 = ORIENTED_EDGE('',*,*,#307648,.T.); +#307648 = EDGE_CURVE('',#307641,#307641,#307649,.T.); +#307649 = CIRCLE('',#307650,0.3); +#307650 = AXIS2_PLACEMENT_3D('',#307651,#307652,#307653); +#307651 = CARTESIAN_POINT('',(124.4,-88.,-3.5E-02)); +#307652 = DIRECTION('',(0.,0.,1.)); +#307653 = DIRECTION('',(1.,0.,-0.)); +#307654 = ORIENTED_EDGE('',*,*,#307638,.F.); +#307655 = ORIENTED_EDGE('',*,*,#307656,.F.); +#307656 = EDGE_CURVE('',#307639,#307639,#307657,.T.); +#307657 = CIRCLE('',#307658,0.3); +#307658 = AXIS2_PLACEMENT_3D('',#307659,#307660,#307661); +#307659 = CARTESIAN_POINT('',(124.4,-88.,0.)); +#307660 = DIRECTION('',(0.,0.,1.)); +#307661 = DIRECTION('',(1.,0.,-0.)); +#307662 = CYLINDRICAL_SURFACE('',#307663,0.3); +#307663 = AXIS2_PLACEMENT_3D('',#307664,#307665,#307666); +#307664 = CARTESIAN_POINT('',(124.4,-88.,0.)); +#307665 = DIRECTION('',(0.,0.,1.)); +#307666 = DIRECTION('',(1.,0.,-0.)); +#307667 = ADVANCED_FACE('',(#307668),#307695,.F.); +#307668 = FACE_BOUND('',#307669,.F.); +#307669 = EDGE_LOOP('',(#307670,#307680,#307687,#307688)); +#307670 = ORIENTED_EDGE('',*,*,#307671,.T.); +#307671 = EDGE_CURVE('',#307672,#307674,#307676,.T.); +#307672 = VERTEX_POINT('',#307673); +#307673 = CARTESIAN_POINT('',(124.537255,-88.,0.)); +#307674 = VERTEX_POINT('',#307675); +#307675 = CARTESIAN_POINT('',(124.537255,-88.,-3.5E-02)); +#307676 = LINE('',#307677,#307678); +#307677 = CARTESIAN_POINT('',(124.537255,-88.,0.)); +#307678 = VECTOR('',#307679,1.); +#307679 = DIRECTION('',(0.,0.,-1.)); +#307680 = ORIENTED_EDGE('',*,*,#307681,.T.); +#307681 = EDGE_CURVE('',#307674,#307674,#307682,.T.); +#307682 = CIRCLE('',#307683,0.137255); +#307683 = AXIS2_PLACEMENT_3D('',#307684,#307685,#307686); +#307684 = CARTESIAN_POINT('',(124.4,-88.,-3.5E-02)); +#307685 = DIRECTION('',(0.,0.,1.)); +#307686 = DIRECTION('',(1.,0.,-0.)); +#307687 = ORIENTED_EDGE('',*,*,#307671,.F.); +#307688 = ORIENTED_EDGE('',*,*,#307689,.F.); +#307689 = EDGE_CURVE('',#307672,#307672,#307690,.T.); +#307690 = CIRCLE('',#307691,0.137255); +#307691 = AXIS2_PLACEMENT_3D('',#307692,#307693,#307694); +#307692 = CARTESIAN_POINT('',(124.4,-88.,0.)); +#307693 = DIRECTION('',(0.,0.,1.)); +#307694 = DIRECTION('',(1.,0.,-0.)); +#307695 = CYLINDRICAL_SURFACE('',#307696,0.137255); +#307696 = AXIS2_PLACEMENT_3D('',#307697,#307698,#307699); +#307697 = CARTESIAN_POINT('',(124.4,-88.,0.)); +#307698 = DIRECTION('',(0.,0.,1.)); +#307699 = DIRECTION('',(1.,0.,-0.)); +#307700 = ADVANCED_FACE('',(#307701,#307704),#307707,.F.); +#307701 = FACE_BOUND('',#307702,.T.); +#307702 = EDGE_LOOP('',(#307703)); +#307703 = ORIENTED_EDGE('',*,*,#307656,.T.); +#307704 = FACE_BOUND('',#307705,.F.); +#307705 = EDGE_LOOP('',(#307706)); +#307706 = ORIENTED_EDGE('',*,*,#307689,.T.); +#307707 = PLANE('',#307708); +#307708 = AXIS2_PLACEMENT_3D('',#307709,#307710,#307711); +#307709 = CARTESIAN_POINT('',(0.,0.,0.)); +#307710 = DIRECTION('',(-0.,-0.,-1.)); +#307711 = DIRECTION('',(-1.,0.,0.)); +#307712 = ADVANCED_FACE('',(#307713,#307716),#307719,.T.); +#307713 = FACE_BOUND('',#307714,.F.); +#307714 = EDGE_LOOP('',(#307715)); +#307715 = ORIENTED_EDGE('',*,*,#307648,.T.); +#307716 = FACE_BOUND('',#307717,.T.); +#307717 = EDGE_LOOP('',(#307718)); +#307718 = ORIENTED_EDGE('',*,*,#307681,.T.); +#307719 = PLANE('',#307720); +#307720 = AXIS2_PLACEMENT_3D('',#307721,#307722,#307723); +#307721 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307722 = DIRECTION('',(-0.,-0.,-1.)); +#307723 = DIRECTION('',(-1.,0.,0.)); +#307724 = MANIFOLD_SOLID_BREP('',#307725); +#307725 = CLOSED_SHELL('',(#307726,#307759,#307792,#307804)); +#307726 = ADVANCED_FACE('',(#307727),#307754,.T.); +#307727 = FACE_BOUND('',#307728,.T.); +#307728 = EDGE_LOOP('',(#307729,#307739,#307746,#307747)); +#307729 = ORIENTED_EDGE('',*,*,#307730,.T.); +#307730 = EDGE_CURVE('',#307731,#307733,#307735,.T.); +#307731 = VERTEX_POINT('',#307732); +#307732 = CARTESIAN_POINT('',(139.8,-88.,0.)); +#307733 = VERTEX_POINT('',#307734); +#307734 = CARTESIAN_POINT('',(139.8,-88.,-3.5E-02)); +#307735 = LINE('',#307736,#307737); +#307736 = CARTESIAN_POINT('',(139.8,-88.,0.)); +#307737 = VECTOR('',#307738,1.); +#307738 = DIRECTION('',(0.,0.,-1.)); +#307739 = ORIENTED_EDGE('',*,*,#307740,.T.); +#307740 = EDGE_CURVE('',#307733,#307733,#307741,.T.); +#307741 = CIRCLE('',#307742,0.3); +#307742 = AXIS2_PLACEMENT_3D('',#307743,#307744,#307745); +#307743 = CARTESIAN_POINT('',(139.5,-88.,-3.5E-02)); +#307744 = DIRECTION('',(0.,0.,1.)); +#307745 = DIRECTION('',(1.,0.,-0.)); +#307746 = ORIENTED_EDGE('',*,*,#307730,.F.); +#307747 = ORIENTED_EDGE('',*,*,#307748,.F.); +#307748 = EDGE_CURVE('',#307731,#307731,#307749,.T.); +#307749 = CIRCLE('',#307750,0.3); +#307750 = AXIS2_PLACEMENT_3D('',#307751,#307752,#307753); +#307751 = CARTESIAN_POINT('',(139.5,-88.,0.)); +#307752 = DIRECTION('',(0.,0.,1.)); +#307753 = DIRECTION('',(1.,0.,-0.)); +#307754 = CYLINDRICAL_SURFACE('',#307755,0.3); +#307755 = AXIS2_PLACEMENT_3D('',#307756,#307757,#307758); +#307756 = CARTESIAN_POINT('',(139.5,-88.,0.)); +#307757 = DIRECTION('',(0.,0.,1.)); +#307758 = DIRECTION('',(1.,0.,-0.)); +#307759 = ADVANCED_FACE('',(#307760),#307787,.F.); +#307760 = FACE_BOUND('',#307761,.F.); +#307761 = EDGE_LOOP('',(#307762,#307772,#307779,#307780)); +#307762 = ORIENTED_EDGE('',*,*,#307763,.T.); +#307763 = EDGE_CURVE('',#307764,#307766,#307768,.T.); +#307764 = VERTEX_POINT('',#307765); +#307765 = CARTESIAN_POINT('',(139.637255,-88.,0.)); +#307766 = VERTEX_POINT('',#307767); +#307767 = CARTESIAN_POINT('',(139.637255,-88.,-3.5E-02)); +#307768 = LINE('',#307769,#307770); +#307769 = CARTESIAN_POINT('',(139.637255,-88.,0.)); +#307770 = VECTOR('',#307771,1.); +#307771 = DIRECTION('',(0.,0.,-1.)); +#307772 = ORIENTED_EDGE('',*,*,#307773,.T.); +#307773 = EDGE_CURVE('',#307766,#307766,#307774,.T.); +#307774 = CIRCLE('',#307775,0.137255); +#307775 = AXIS2_PLACEMENT_3D('',#307776,#307777,#307778); +#307776 = CARTESIAN_POINT('',(139.5,-88.,-3.5E-02)); +#307777 = DIRECTION('',(0.,0.,1.)); +#307778 = DIRECTION('',(1.,0.,-0.)); +#307779 = ORIENTED_EDGE('',*,*,#307763,.F.); +#307780 = ORIENTED_EDGE('',*,*,#307781,.F.); +#307781 = EDGE_CURVE('',#307764,#307764,#307782,.T.); +#307782 = CIRCLE('',#307783,0.137255); +#307783 = AXIS2_PLACEMENT_3D('',#307784,#307785,#307786); +#307784 = CARTESIAN_POINT('',(139.5,-88.,0.)); +#307785 = DIRECTION('',(0.,0.,1.)); +#307786 = DIRECTION('',(1.,0.,-0.)); +#307787 = CYLINDRICAL_SURFACE('',#307788,0.137255); +#307788 = AXIS2_PLACEMENT_3D('',#307789,#307790,#307791); +#307789 = CARTESIAN_POINT('',(139.5,-88.,0.)); +#307790 = DIRECTION('',(0.,0.,1.)); +#307791 = DIRECTION('',(1.,0.,-0.)); +#307792 = ADVANCED_FACE('',(#307793,#307796),#307799,.F.); +#307793 = FACE_BOUND('',#307794,.T.); +#307794 = EDGE_LOOP('',(#307795)); +#307795 = ORIENTED_EDGE('',*,*,#307748,.T.); +#307796 = FACE_BOUND('',#307797,.F.); +#307797 = EDGE_LOOP('',(#307798)); +#307798 = ORIENTED_EDGE('',*,*,#307781,.T.); +#307799 = PLANE('',#307800); +#307800 = AXIS2_PLACEMENT_3D('',#307801,#307802,#307803); +#307801 = CARTESIAN_POINT('',(0.,0.,0.)); +#307802 = DIRECTION('',(-0.,-0.,-1.)); +#307803 = DIRECTION('',(-1.,0.,0.)); +#307804 = ADVANCED_FACE('',(#307805,#307808),#307811,.T.); +#307805 = FACE_BOUND('',#307806,.F.); +#307806 = EDGE_LOOP('',(#307807)); +#307807 = ORIENTED_EDGE('',*,*,#307740,.T.); +#307808 = FACE_BOUND('',#307809,.T.); +#307809 = EDGE_LOOP('',(#307810)); +#307810 = ORIENTED_EDGE('',*,*,#307773,.T.); +#307811 = PLANE('',#307812); +#307812 = AXIS2_PLACEMENT_3D('',#307813,#307814,#307815); +#307813 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#307814 = DIRECTION('',(-0.,-0.,-1.)); +#307815 = DIRECTION('',(-1.,0.,0.)); +#307816 = MANIFOLD_SOLID_BREP('',#307817); +#307817 = CLOSED_SHELL('',(#307818,#307860,#307891,#307924,#307955, + #307986,#308019,#308050,#308081,#308114,#308145,#308176,#308198, + #308231,#308254)); +#307818 = ADVANCED_FACE('',(#307819),#307855,.T.); +#307819 = FACE_BOUND('',#307820,.F.); +#307820 = EDGE_LOOP('',(#307821,#307831,#307840,#307848)); +#307821 = ORIENTED_EDGE('',*,*,#307822,.T.); +#307822 = EDGE_CURVE('',#307823,#307825,#307827,.T.); +#307823 = VERTEX_POINT('',#307824); +#307824 = CARTESIAN_POINT('',(140.701921,-78.205491,0.)); +#307825 = VERTEX_POINT('',#307826); +#307826 = CARTESIAN_POINT('',(140.701921,-78.205491,-3.5E-02)); +#307827 = LINE('',#307828,#307829); +#307828 = CARTESIAN_POINT('',(140.701921,-78.205491,0.)); +#307829 = VECTOR('',#307830,1.); +#307830 = DIRECTION('',(0.,0.,-1.)); +#307831 = ORIENTED_EDGE('',*,*,#307832,.T.); +#307832 = EDGE_CURVE('',#307825,#307833,#307835,.T.); +#307833 = VERTEX_POINT('',#307834); +#307834 = CARTESIAN_POINT('',(140.780491,-78.126921,-3.5E-02)); +#307835 = CIRCLE('',#307836,0.100002891901); +#307836 = AXIS2_PLACEMENT_3D('',#307837,#307838,#307839); +#307837 = CARTESIAN_POINT('',(140.80000207103,-78.22500207103,-3.5E-02) + ); +#307838 = DIRECTION('',(0.,0.,-1.)); +#307839 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#307840 = ORIENTED_EDGE('',*,*,#307841,.F.); +#307841 = EDGE_CURVE('',#307842,#307833,#307844,.T.); +#307842 = VERTEX_POINT('',#307843); +#307843 = CARTESIAN_POINT('',(140.780491,-78.126921,0.)); +#307844 = LINE('',#307845,#307846); +#307845 = CARTESIAN_POINT('',(140.780491,-78.126921,0.)); +#307846 = VECTOR('',#307847,1.); +#307847 = DIRECTION('',(0.,0.,-1.)); +#307848 = ORIENTED_EDGE('',*,*,#307849,.F.); +#307849 = EDGE_CURVE('',#307823,#307842,#307850,.T.); +#307850 = CIRCLE('',#307851,0.100002891901); +#307851 = AXIS2_PLACEMENT_3D('',#307852,#307853,#307854); +#307852 = CARTESIAN_POINT('',(140.80000207103,-78.22500207103,0.)); +#307853 = DIRECTION('',(0.,0.,-1.)); +#307854 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#307855 = CYLINDRICAL_SURFACE('',#307856,0.100002891901); +#307856 = AXIS2_PLACEMENT_3D('',#307857,#307858,#307859); +#307857 = CARTESIAN_POINT('',(140.80000207103,-78.22500207103,0.)); +#307858 = DIRECTION('',(-0.,-0.,1.)); +#307859 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#307860 = ADVANCED_FACE('',(#307861),#307886,.F.); +#307861 = FACE_BOUND('',#307862,.F.); +#307862 = EDGE_LOOP('',(#307863,#307864,#307872,#307880)); +#307863 = ORIENTED_EDGE('',*,*,#307841,.T.); +#307864 = ORIENTED_EDGE('',*,*,#307865,.T.); +#307865 = EDGE_CURVE('',#307833,#307866,#307868,.T.); +#307866 = VERTEX_POINT('',#307867); +#307867 = CARTESIAN_POINT('',(141.319509,-78.126921,-3.5E-02)); +#307868 = LINE('',#307869,#307870); +#307869 = CARTESIAN_POINT('',(140.780491,-78.126921,-3.5E-02)); +#307870 = VECTOR('',#307871,1.); +#307871 = DIRECTION('',(1.,0.,0.)); +#307872 = ORIENTED_EDGE('',*,*,#307873,.F.); +#307873 = EDGE_CURVE('',#307874,#307866,#307876,.T.); +#307874 = VERTEX_POINT('',#307875); +#307875 = CARTESIAN_POINT('',(141.319509,-78.126921,0.)); +#307876 = LINE('',#307877,#307878); +#307877 = CARTESIAN_POINT('',(141.319509,-78.126921,0.)); +#307878 = VECTOR('',#307879,1.); +#307879 = DIRECTION('',(0.,0.,-1.)); +#307880 = ORIENTED_EDGE('',*,*,#307881,.F.); +#307881 = EDGE_CURVE('',#307842,#307874,#307882,.T.); +#307882 = LINE('',#307883,#307884); +#307883 = CARTESIAN_POINT('',(140.780491,-78.126921,0.)); +#307884 = VECTOR('',#307885,1.); +#307885 = DIRECTION('',(1.,0.,0.)); +#307886 = PLANE('',#307887); +#307887 = AXIS2_PLACEMENT_3D('',#307888,#307889,#307890); +#307888 = CARTESIAN_POINT('',(140.780491,-78.126921,0.)); +#307889 = DIRECTION('',(0.,-1.,0.)); +#307890 = DIRECTION('',(1.,0.,0.)); +#307891 = ADVANCED_FACE('',(#307892),#307919,.T.); +#307892 = FACE_BOUND('',#307893,.F.); +#307893 = EDGE_LOOP('',(#307894,#307895,#307904,#307912)); +#307894 = ORIENTED_EDGE('',*,*,#307873,.T.); +#307895 = ORIENTED_EDGE('',*,*,#307896,.T.); +#307896 = EDGE_CURVE('',#307866,#307897,#307899,.T.); +#307897 = VERTEX_POINT('',#307898); +#307898 = CARTESIAN_POINT('',(141.319509,-78.323079,-3.5E-02)); +#307899 = CIRCLE('',#307900,0.100000456609); +#307900 = AXIS2_PLACEMENT_3D('',#307901,#307902,#307903); +#307901 = CARTESIAN_POINT('',(141.3,-78.225,-3.5E-02)); +#307902 = DIRECTION('',(0.,0.,-1.)); +#307903 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#307904 = ORIENTED_EDGE('',*,*,#307905,.F.); +#307905 = EDGE_CURVE('',#307906,#307897,#307908,.T.); +#307906 = VERTEX_POINT('',#307907); +#307907 = CARTESIAN_POINT('',(141.319509,-78.323079,0.)); +#307908 = LINE('',#307909,#307910); +#307909 = CARTESIAN_POINT('',(141.319509,-78.323079,0.)); +#307910 = VECTOR('',#307911,1.); +#307911 = DIRECTION('',(0.,0.,-1.)); +#307912 = ORIENTED_EDGE('',*,*,#307913,.F.); +#307913 = EDGE_CURVE('',#307874,#307906,#307914,.T.); +#307914 = CIRCLE('',#307915,0.100000456609); +#307915 = AXIS2_PLACEMENT_3D('',#307916,#307917,#307918); +#307916 = CARTESIAN_POINT('',(141.3,-78.225,0.)); +#307917 = DIRECTION('',(0.,0.,-1.)); +#307918 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#307919 = CYLINDRICAL_SURFACE('',#307920,0.100000456609); +#307920 = AXIS2_PLACEMENT_3D('',#307921,#307922,#307923); +#307921 = CARTESIAN_POINT('',(141.3,-78.225,0.)); +#307922 = DIRECTION('',(-0.,-0.,1.)); +#307923 = DIRECTION('',(0.195089109206,0.980785521645,0.)); +#307924 = ADVANCED_FACE('',(#307925),#307950,.F.); +#307925 = FACE_BOUND('',#307926,.F.); +#307926 = EDGE_LOOP('',(#307927,#307928,#307936,#307944)); +#307927 = ORIENTED_EDGE('',*,*,#307905,.T.); +#307928 = ORIENTED_EDGE('',*,*,#307929,.T.); +#307929 = EDGE_CURVE('',#307897,#307930,#307932,.T.); +#307930 = VERTEX_POINT('',#307931); +#307931 = CARTESIAN_POINT('',(140.9,-78.325,-3.5E-02)); +#307932 = LINE('',#307933,#307934); +#307933 = CARTESIAN_POINT('',(141.319509,-78.323079,-3.5E-02)); +#307934 = VECTOR('',#307935,1.); +#307935 = DIRECTION('',(-0.999989515799,-4.579114774285E-03,0.)); +#307936 = ORIENTED_EDGE('',*,*,#307937,.F.); +#307937 = EDGE_CURVE('',#307938,#307930,#307940,.T.); +#307938 = VERTEX_POINT('',#307939); +#307939 = CARTESIAN_POINT('',(140.9,-78.325,0.)); +#307940 = LINE('',#307941,#307942); +#307941 = CARTESIAN_POINT('',(140.9,-78.325,0.)); +#307942 = VECTOR('',#307943,1.); +#307943 = DIRECTION('',(0.,0.,-1.)); +#307944 = ORIENTED_EDGE('',*,*,#307945,.F.); +#307945 = EDGE_CURVE('',#307906,#307938,#307946,.T.); +#307946 = LINE('',#307947,#307948); +#307947 = CARTESIAN_POINT('',(141.319509,-78.323079,0.)); +#307948 = VECTOR('',#307949,1.); +#307949 = DIRECTION('',(-0.999989515799,-4.579114774285E-03,0.)); +#307950 = PLANE('',#307951); +#307951 = AXIS2_PLACEMENT_3D('',#307952,#307953,#307954); +#307952 = CARTESIAN_POINT('',(141.319509,-78.323079,0.)); +#307953 = DIRECTION('',(-4.579114774285E-03,0.999989515799,0.)); +#307954 = DIRECTION('',(-0.999989515799,-4.579114774285E-03,0.)); +#307955 = ADVANCED_FACE('',(#307956),#307981,.F.); +#307956 = FACE_BOUND('',#307957,.F.); +#307957 = EDGE_LOOP('',(#307958,#307959,#307967,#307975)); +#307958 = ORIENTED_EDGE('',*,*,#307937,.T.); +#307959 = ORIENTED_EDGE('',*,*,#307960,.T.); +#307960 = EDGE_CURVE('',#307930,#307961,#307963,.T.); +#307961 = VERTEX_POINT('',#307962); +#307962 = CARTESIAN_POINT('',(140.898079,-79.419509,-3.5E-02)); +#307963 = LINE('',#307964,#307965); +#307964 = CARTESIAN_POINT('',(140.9,-78.325,-3.5E-02)); +#307965 = VECTOR('',#307966,1.); +#307966 = DIRECTION('',(-1.755122197471E-03,-0.999998459772,0.)); +#307967 = ORIENTED_EDGE('',*,*,#307968,.F.); +#307968 = EDGE_CURVE('',#307969,#307961,#307971,.T.); +#307969 = VERTEX_POINT('',#307970); +#307970 = CARTESIAN_POINT('',(140.898079,-79.419509,0.)); +#307971 = LINE('',#307972,#307973); +#307972 = CARTESIAN_POINT('',(140.898079,-79.419509,0.)); +#307973 = VECTOR('',#307974,1.); +#307974 = DIRECTION('',(0.,0.,-1.)); +#307975 = ORIENTED_EDGE('',*,*,#307976,.F.); +#307976 = EDGE_CURVE('',#307938,#307969,#307977,.T.); +#307977 = LINE('',#307978,#307979); +#307978 = CARTESIAN_POINT('',(140.9,-78.325,0.)); +#307979 = VECTOR('',#307980,1.); +#307980 = DIRECTION('',(-1.755122197471E-03,-0.999998459772,0.)); +#307981 = PLANE('',#307982); +#307982 = AXIS2_PLACEMENT_3D('',#307983,#307984,#307985); +#307983 = CARTESIAN_POINT('',(140.9,-78.325,0.)); +#307984 = DIRECTION('',(-0.999998459772,1.755122197471E-03,0.)); +#307985 = DIRECTION('',(-1.755122197471E-03,-0.999998459772,0.)); +#307986 = ADVANCED_FACE('',(#307987),#308014,.T.); +#307987 = FACE_BOUND('',#307988,.F.); +#307988 = EDGE_LOOP('',(#307989,#307990,#307999,#308007)); +#307989 = ORIENTED_EDGE('',*,*,#307968,.T.); +#307990 = ORIENTED_EDGE('',*,*,#307991,.T.); +#307991 = EDGE_CURVE('',#307961,#307992,#307994,.T.); +#307992 = VERTEX_POINT('',#307993); +#307993 = CARTESIAN_POINT('',(140.819509,-79.498079,-3.5E-02)); +#307994 = CIRCLE('',#307995,0.100002891901); +#307995 = AXIS2_PLACEMENT_3D('',#307996,#307997,#307998); +#307996 = CARTESIAN_POINT('',(140.79999792896,-79.39999792896,-3.5E-02) + ); +#307997 = DIRECTION('',(0.,0.,-1.)); +#307998 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#307999 = ORIENTED_EDGE('',*,*,#308000,.F.); +#308000 = EDGE_CURVE('',#308001,#307992,#308003,.T.); +#308001 = VERTEX_POINT('',#308002); +#308002 = CARTESIAN_POINT('',(140.819509,-79.498079,0.)); +#308003 = LINE('',#308004,#308005); +#308004 = CARTESIAN_POINT('',(140.819509,-79.498079,0.)); +#308005 = VECTOR('',#308006,1.); +#308006 = DIRECTION('',(0.,0.,-1.)); +#308007 = ORIENTED_EDGE('',*,*,#308008,.F.); +#308008 = EDGE_CURVE('',#307969,#308001,#308009,.T.); +#308009 = CIRCLE('',#308010,0.100002891901); +#308010 = AXIS2_PLACEMENT_3D('',#308011,#308012,#308013); +#308011 = CARTESIAN_POINT('',(140.79999792896,-79.39999792896,0.)); +#308012 = DIRECTION('',(0.,0.,-1.)); +#308013 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#308014 = CYLINDRICAL_SURFACE('',#308015,0.100002891901); +#308015 = AXIS2_PLACEMENT_3D('',#308016,#308017,#308018); +#308016 = CARTESIAN_POINT('',(140.79999792896,-79.39999792896,0.)); +#308017 = DIRECTION('',(-0.,-0.,1.)); +#308018 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#308019 = ADVANCED_FACE('',(#308020),#308045,.F.); +#308020 = FACE_BOUND('',#308021,.F.); +#308021 = EDGE_LOOP('',(#308022,#308023,#308031,#308039)); +#308022 = ORIENTED_EDGE('',*,*,#308000,.T.); +#308023 = ORIENTED_EDGE('',*,*,#308024,.T.); +#308024 = EDGE_CURVE('',#307992,#308025,#308027,.T.); +#308025 = VERTEX_POINT('',#308026); +#308026 = CARTESIAN_POINT('',(139.881131,-79.5,-3.5E-02)); +#308027 = LINE('',#308028,#308029); +#308028 = CARTESIAN_POINT('',(140.819509,-79.498079,-3.5E-02)); +#308029 = VECTOR('',#308030,1.); +#308030 = DIRECTION('',(-0.999997904596,-2.047145153366E-03,0.)); +#308031 = ORIENTED_EDGE('',*,*,#308032,.F.); +#308032 = EDGE_CURVE('',#308033,#308025,#308035,.T.); +#308033 = VERTEX_POINT('',#308034); +#308034 = CARTESIAN_POINT('',(139.881131,-79.5,0.)); +#308035 = LINE('',#308036,#308037); +#308036 = CARTESIAN_POINT('',(139.881131,-79.5,0.)); +#308037 = VECTOR('',#308038,1.); +#308038 = DIRECTION('',(0.,0.,-1.)); +#308039 = ORIENTED_EDGE('',*,*,#308040,.F.); +#308040 = EDGE_CURVE('',#308001,#308033,#308041,.T.); +#308041 = LINE('',#308042,#308043); +#308042 = CARTESIAN_POINT('',(140.819509,-79.498079,0.)); +#308043 = VECTOR('',#308044,1.); +#308044 = DIRECTION('',(-0.999997904596,-2.047145153366E-03,0.)); +#308045 = PLANE('',#308046); +#308046 = AXIS2_PLACEMENT_3D('',#308047,#308048,#308049); +#308047 = CARTESIAN_POINT('',(140.819509,-79.498079,0.)); +#308048 = DIRECTION('',(-2.047145153366E-03,0.999997904596,0.)); +#308049 = DIRECTION('',(-0.999997904596,-2.047145153366E-03,0.)); +#308050 = ADVANCED_FACE('',(#308051),#308076,.F.); +#308051 = FACE_BOUND('',#308052,.F.); +#308052 = EDGE_LOOP('',(#308053,#308054,#308062,#308070)); +#308053 = ORIENTED_EDGE('',*,*,#308032,.T.); +#308054 = ORIENTED_EDGE('',*,*,#308055,.T.); +#308055 = EDGE_CURVE('',#308025,#308056,#308058,.T.); +#308056 = VERTEX_POINT('',#308057); +#308057 = CARTESIAN_POINT('',(139.877164,-79.514805,-3.5E-02)); +#308058 = LINE('',#308059,#308060); +#308059 = CARTESIAN_POINT('',(139.881131,-79.5,-3.5E-02)); +#308060 = VECTOR('',#308061,1.); +#308061 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#308062 = ORIENTED_EDGE('',*,*,#308063,.F.); +#308063 = EDGE_CURVE('',#308064,#308056,#308066,.T.); +#308064 = VERTEX_POINT('',#308065); +#308065 = CARTESIAN_POINT('',(139.877164,-79.514805,0.)); +#308066 = LINE('',#308067,#308068); +#308067 = CARTESIAN_POINT('',(139.877164,-79.514805,0.)); +#308068 = VECTOR('',#308069,1.); +#308069 = DIRECTION('',(0.,0.,-1.)); +#308070 = ORIENTED_EDGE('',*,*,#308071,.F.); +#308071 = EDGE_CURVE('',#308033,#308064,#308072,.T.); +#308072 = LINE('',#308073,#308074); +#308073 = CARTESIAN_POINT('',(139.881131,-79.5,0.)); +#308074 = VECTOR('',#308075,1.); +#308075 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#308076 = PLANE('',#308077); +#308077 = AXIS2_PLACEMENT_3D('',#308078,#308079,#308080); +#308078 = CARTESIAN_POINT('',(139.881131,-79.5,0.)); +#308079 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#308080 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#308081 = ADVANCED_FACE('',(#308082),#308109,.T.); +#308082 = FACE_BOUND('',#308083,.F.); +#308083 = EDGE_LOOP('',(#308084,#308085,#308094,#308102)); +#308084 = ORIENTED_EDGE('',*,*,#308063,.T.); +#308085 = ORIENTED_EDGE('',*,*,#308086,.T.); +#308086 = EDGE_CURVE('',#308056,#308087,#308089,.T.); +#308087 = VERTEX_POINT('',#308088); +#308088 = CARTESIAN_POINT('',(139.877164,-79.285195,-3.5E-02)); +#308089 = CIRCLE('',#308090,0.299999850918); +#308090 = AXIS2_PLACEMENT_3D('',#308091,#308092,#308093); +#308091 = CARTESIAN_POINT('',(139.6000002893,-79.4,-3.5E-02)); +#308092 = DIRECTION('',(0.,0.,-1.)); +#308093 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#308094 = ORIENTED_EDGE('',*,*,#308095,.F.); +#308095 = EDGE_CURVE('',#308096,#308087,#308098,.T.); +#308096 = VERTEX_POINT('',#308097); +#308097 = CARTESIAN_POINT('',(139.877164,-79.285195,0.)); +#308098 = LINE('',#308099,#308100); +#308099 = CARTESIAN_POINT('',(139.877164,-79.285195,0.)); +#308100 = VECTOR('',#308101,1.); +#308101 = DIRECTION('',(0.,0.,-1.)); +#308102 = ORIENTED_EDGE('',*,*,#308103,.F.); +#308103 = EDGE_CURVE('',#308064,#308096,#308104,.T.); +#308104 = CIRCLE('',#308105,0.299999850918); +#308105 = AXIS2_PLACEMENT_3D('',#308106,#308107,#308108); +#308106 = CARTESIAN_POINT('',(139.6000002893,-79.4,0.)); +#308107 = DIRECTION('',(0.,0.,-1.)); +#308108 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#308109 = CYLINDRICAL_SURFACE('',#308110,0.299999850918); +#308110 = AXIS2_PLACEMENT_3D('',#308111,#308112,#308113); +#308111 = CARTESIAN_POINT('',(139.6000002893,-79.4,0.)); +#308112 = DIRECTION('',(-0.,-0.,1.)); +#308113 = DIRECTION('',(0.92387949476,-0.382683523504,0.)); +#308114 = ADVANCED_FACE('',(#308115),#308140,.F.); +#308115 = FACE_BOUND('',#308116,.F.); +#308116 = EDGE_LOOP('',(#308117,#308118,#308126,#308134)); +#308117 = ORIENTED_EDGE('',*,*,#308095,.T.); +#308118 = ORIENTED_EDGE('',*,*,#308119,.T.); +#308119 = EDGE_CURVE('',#308087,#308120,#308122,.T.); +#308120 = VERTEX_POINT('',#308121); +#308121 = CARTESIAN_POINT('',(139.881131,-79.3,-3.5E-02)); +#308122 = LINE('',#308123,#308124); +#308123 = CARTESIAN_POINT('',(139.877164,-79.285195,-3.5E-02)); +#308124 = VECTOR('',#308125,1.); +#308125 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#308126 = ORIENTED_EDGE('',*,*,#308127,.F.); +#308127 = EDGE_CURVE('',#308128,#308120,#308130,.T.); +#308128 = VERTEX_POINT('',#308129); +#308129 = CARTESIAN_POINT('',(139.881131,-79.3,0.)); +#308130 = LINE('',#308131,#308132); +#308131 = CARTESIAN_POINT('',(139.881131,-79.3,0.)); +#308132 = VECTOR('',#308133,1.); +#308133 = DIRECTION('',(0.,0.,-1.)); +#308134 = ORIENTED_EDGE('',*,*,#308135,.F.); +#308135 = EDGE_CURVE('',#308096,#308128,#308136,.T.); +#308136 = LINE('',#308137,#308138); +#308137 = CARTESIAN_POINT('',(139.877164,-79.285195,0.)); +#308138 = VECTOR('',#308139,1.); +#308139 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#308140 = PLANE('',#308141); +#308141 = AXIS2_PLACEMENT_3D('',#308142,#308143,#308144); +#308142 = CARTESIAN_POINT('',(139.877164,-79.285195,0.)); +#308143 = DIRECTION('',(-0.965925627198,-0.25881978812,-0.)); +#308144 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#308145 = ADVANCED_FACE('',(#308146),#308171,.F.); +#308146 = FACE_BOUND('',#308147,.F.); +#308147 = EDGE_LOOP('',(#308148,#308149,#308157,#308165)); +#308148 = ORIENTED_EDGE('',*,*,#308127,.T.); +#308149 = ORIENTED_EDGE('',*,*,#308150,.T.); +#308150 = EDGE_CURVE('',#308120,#308151,#308153,.T.); +#308151 = VERTEX_POINT('',#308152); +#308152 = CARTESIAN_POINT('',(140.7,-79.3,-3.5E-02)); +#308153 = LINE('',#308154,#308155); +#308154 = CARTESIAN_POINT('',(139.881131,-79.3,-3.5E-02)); +#308155 = VECTOR('',#308156,1.); +#308156 = DIRECTION('',(1.,0.,0.)); +#308157 = ORIENTED_EDGE('',*,*,#308158,.F.); +#308158 = EDGE_CURVE('',#308159,#308151,#308161,.T.); +#308159 = VERTEX_POINT('',#308160); +#308160 = CARTESIAN_POINT('',(140.7,-79.3,0.)); +#308161 = LINE('',#308162,#308163); +#308162 = CARTESIAN_POINT('',(140.7,-79.3,0.)); +#308163 = VECTOR('',#308164,1.); +#308164 = DIRECTION('',(0.,0.,-1.)); +#308165 = ORIENTED_EDGE('',*,*,#308166,.F.); +#308166 = EDGE_CURVE('',#308128,#308159,#308167,.T.); +#308167 = LINE('',#308168,#308169); +#308168 = CARTESIAN_POINT('',(139.881131,-79.3,0.)); +#308169 = VECTOR('',#308170,1.); +#308170 = DIRECTION('',(1.,0.,0.)); +#308171 = PLANE('',#308172); +#308172 = AXIS2_PLACEMENT_3D('',#308173,#308174,#308175); +#308173 = CARTESIAN_POINT('',(139.881131,-79.3,0.)); +#308174 = DIRECTION('',(0.,-1.,0.)); +#308175 = DIRECTION('',(1.,0.,0.)); +#308176 = ADVANCED_FACE('',(#308177),#308193,.F.); +#308177 = FACE_BOUND('',#308178,.F.); +#308178 = EDGE_LOOP('',(#308179,#308180,#308186,#308187)); +#308179 = ORIENTED_EDGE('',*,*,#308158,.T.); +#308180 = ORIENTED_EDGE('',*,*,#308181,.T.); +#308181 = EDGE_CURVE('',#308151,#307825,#308182,.T.); +#308182 = LINE('',#308183,#308184); +#308183 = CARTESIAN_POINT('',(140.7,-79.3,-3.5E-02)); +#308184 = VECTOR('',#308185,1.); +#308185 = DIRECTION('',(1.755122197471E-03,0.999998459772,0.)); +#308186 = ORIENTED_EDGE('',*,*,#307822,.F.); +#308187 = ORIENTED_EDGE('',*,*,#308188,.F.); +#308188 = EDGE_CURVE('',#308159,#307823,#308189,.T.); +#308189 = LINE('',#308190,#308191); +#308190 = CARTESIAN_POINT('',(140.7,-79.3,0.)); +#308191 = VECTOR('',#308192,1.); +#308192 = DIRECTION('',(1.755122197471E-03,0.999998459772,0.)); +#308193 = PLANE('',#308194); +#308194 = AXIS2_PLACEMENT_3D('',#308195,#308196,#308197); +#308195 = CARTESIAN_POINT('',(140.7,-79.3,0.)); +#308196 = DIRECTION('',(0.999998459772,-1.755122197471E-03,0.)); +#308197 = DIRECTION('',(1.755122197471E-03,0.999998459772,0.)); +#308198 = ADVANCED_FACE('',(#308199),#308226,.F.); +#308199 = FACE_BOUND('',#308200,.F.); +#308200 = EDGE_LOOP('',(#308201,#308211,#308218,#308219)); +#308201 = ORIENTED_EDGE('',*,*,#308202,.T.); +#308202 = EDGE_CURVE('',#308203,#308205,#308207,.T.); +#308203 = VERTEX_POINT('',#308204); +#308204 = CARTESIAN_POINT('',(139.737255,-79.4,0.)); +#308205 = VERTEX_POINT('',#308206); +#308206 = CARTESIAN_POINT('',(139.737255,-79.4,-3.5E-02)); +#308207 = LINE('',#308208,#308209); +#308208 = CARTESIAN_POINT('',(139.737255,-79.4,0.)); +#308209 = VECTOR('',#308210,1.); +#308210 = DIRECTION('',(0.,0.,-1.)); +#308211 = ORIENTED_EDGE('',*,*,#308212,.T.); +#308212 = EDGE_CURVE('',#308205,#308205,#308213,.T.); +#308213 = CIRCLE('',#308214,0.137255); +#308214 = AXIS2_PLACEMENT_3D('',#308215,#308216,#308217); +#308215 = CARTESIAN_POINT('',(139.6,-79.4,-3.5E-02)); +#308216 = DIRECTION('',(0.,0.,1.)); +#308217 = DIRECTION('',(1.,0.,-0.)); +#308218 = ORIENTED_EDGE('',*,*,#308202,.F.); +#308219 = ORIENTED_EDGE('',*,*,#308220,.F.); +#308220 = EDGE_CURVE('',#308203,#308203,#308221,.T.); +#308221 = CIRCLE('',#308222,0.137255); +#308222 = AXIS2_PLACEMENT_3D('',#308223,#308224,#308225); +#308223 = CARTESIAN_POINT('',(139.6,-79.4,0.)); +#308224 = DIRECTION('',(0.,0.,1.)); +#308225 = DIRECTION('',(1.,0.,-0.)); +#308226 = CYLINDRICAL_SURFACE('',#308227,0.137255); +#308227 = AXIS2_PLACEMENT_3D('',#308228,#308229,#308230); +#308228 = CARTESIAN_POINT('',(139.6,-79.4,0.)); +#308229 = DIRECTION('',(0.,0.,1.)); +#308230 = DIRECTION('',(1.,0.,-0.)); +#308231 = ADVANCED_FACE('',(#308232,#308246),#308249,.F.); +#308232 = FACE_BOUND('',#308233,.F.); +#308233 = EDGE_LOOP('',(#308234,#308235,#308236,#308237,#308238,#308239, + #308240,#308241,#308242,#308243,#308244,#308245)); +#308234 = ORIENTED_EDGE('',*,*,#307849,.T.); +#308235 = ORIENTED_EDGE('',*,*,#307881,.T.); +#308236 = ORIENTED_EDGE('',*,*,#307913,.T.); +#308237 = ORIENTED_EDGE('',*,*,#307945,.T.); +#308238 = ORIENTED_EDGE('',*,*,#307976,.T.); +#308239 = ORIENTED_EDGE('',*,*,#308008,.T.); +#308240 = ORIENTED_EDGE('',*,*,#308040,.T.); +#308241 = ORIENTED_EDGE('',*,*,#308071,.T.); +#308242 = ORIENTED_EDGE('',*,*,#308103,.T.); +#308243 = ORIENTED_EDGE('',*,*,#308135,.T.); +#308244 = ORIENTED_EDGE('',*,*,#308166,.T.); +#308245 = ORIENTED_EDGE('',*,*,#308188,.T.); +#308246 = FACE_BOUND('',#308247,.F.); +#308247 = EDGE_LOOP('',(#308248)); +#308248 = ORIENTED_EDGE('',*,*,#308220,.T.); +#308249 = PLANE('',#308250); +#308250 = AXIS2_PLACEMENT_3D('',#308251,#308252,#308253); +#308251 = CARTESIAN_POINT('',(0.,0.,0.)); +#308252 = DIRECTION('',(-0.,-0.,-1.)); +#308253 = DIRECTION('',(-1.,0.,0.)); +#308254 = ADVANCED_FACE('',(#308255,#308269),#308272,.T.); +#308255 = FACE_BOUND('',#308256,.T.); +#308256 = EDGE_LOOP('',(#308257,#308258,#308259,#308260,#308261,#308262, + #308263,#308264,#308265,#308266,#308267,#308268)); +#308257 = ORIENTED_EDGE('',*,*,#307832,.T.); +#308258 = ORIENTED_EDGE('',*,*,#307865,.T.); +#308259 = ORIENTED_EDGE('',*,*,#307896,.T.); +#308260 = ORIENTED_EDGE('',*,*,#307929,.T.); +#308261 = ORIENTED_EDGE('',*,*,#307960,.T.); +#308262 = ORIENTED_EDGE('',*,*,#307991,.T.); +#308263 = ORIENTED_EDGE('',*,*,#308024,.T.); +#308264 = ORIENTED_EDGE('',*,*,#308055,.T.); +#308265 = ORIENTED_EDGE('',*,*,#308086,.T.); +#308266 = ORIENTED_EDGE('',*,*,#308119,.T.); +#308267 = ORIENTED_EDGE('',*,*,#308150,.T.); +#308268 = ORIENTED_EDGE('',*,*,#308181,.T.); +#308269 = FACE_BOUND('',#308270,.T.); +#308270 = EDGE_LOOP('',(#308271)); +#308271 = ORIENTED_EDGE('',*,*,#308212,.T.); +#308272 = PLANE('',#308273); +#308273 = AXIS2_PLACEMENT_3D('',#308274,#308275,#308276); +#308274 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#308275 = DIRECTION('',(-0.,-0.,-1.)); +#308276 = DIRECTION('',(-1.,0.,0.)); +#308277 = MANIFOLD_SOLID_BREP('',#308278); +#308278 = CLOSED_SHELL('',(#308279,#308321,#308352,#308383,#308414, + #308445,#308478,#308509,#308540,#308571,#308602,#308635,#308666, + #308697,#308728,#308759,#308790,#308821,#308854,#308885,#308916, + #308938,#308971,#309003)); +#308279 = ADVANCED_FACE('',(#308280),#308316,.T.); +#308280 = FACE_BOUND('',#308281,.F.); +#308281 = EDGE_LOOP('',(#308282,#308292,#308301,#308309)); +#308282 = ORIENTED_EDGE('',*,*,#308283,.T.); +#308283 = EDGE_CURVE('',#308284,#308286,#308288,.T.); +#308284 = VERTEX_POINT('',#308285); +#308285 = CARTESIAN_POINT('',(142.442991,-76.660579,0.)); +#308286 = VERTEX_POINT('',#308287); +#308287 = CARTESIAN_POINT('',(142.442991,-76.660579,-3.5E-02)); +#308288 = LINE('',#308289,#308290); +#308289 = CARTESIAN_POINT('',(142.442991,-76.660579,0.)); +#308290 = VECTOR('',#308291,1.); +#308291 = DIRECTION('',(0.,0.,-1.)); +#308292 = ORIENTED_EDGE('',*,*,#308293,.T.); +#308293 = EDGE_CURVE('',#308286,#308294,#308296,.T.); +#308294 = VERTEX_POINT('',#308295); +#308295 = CARTESIAN_POINT('',(142.442991,-76.464421,-3.5E-02)); +#308296 = CIRCLE('',#308297,0.100000456609); +#308297 = AXIS2_PLACEMENT_3D('',#308298,#308299,#308300); +#308298 = CARTESIAN_POINT('',(142.4625,-76.5625,-3.5E-02)); +#308299 = DIRECTION('',(0.,0.,-1.)); +#308300 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308301 = ORIENTED_EDGE('',*,*,#308302,.F.); +#308302 = EDGE_CURVE('',#308303,#308294,#308305,.T.); +#308303 = VERTEX_POINT('',#308304); +#308304 = CARTESIAN_POINT('',(142.442991,-76.464421,0.)); +#308305 = LINE('',#308306,#308307); +#308306 = CARTESIAN_POINT('',(142.442991,-76.464421,0.)); +#308307 = VECTOR('',#308308,1.); +#308308 = DIRECTION('',(0.,0.,-1.)); +#308309 = ORIENTED_EDGE('',*,*,#308310,.F.); +#308310 = EDGE_CURVE('',#308284,#308303,#308311,.T.); +#308311 = CIRCLE('',#308312,0.100000456609); +#308312 = AXIS2_PLACEMENT_3D('',#308313,#308314,#308315); +#308313 = CARTESIAN_POINT('',(142.4625,-76.5625,0.)); +#308314 = DIRECTION('',(0.,0.,-1.)); +#308315 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308316 = CYLINDRICAL_SURFACE('',#308317,0.100000456609); +#308317 = AXIS2_PLACEMENT_3D('',#308318,#308319,#308320); +#308318 = CARTESIAN_POINT('',(142.4625,-76.5625,0.)); +#308319 = DIRECTION('',(-0.,-0.,1.)); +#308320 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308321 = ADVANCED_FACE('',(#308322),#308347,.F.); +#308322 = FACE_BOUND('',#308323,.F.); +#308323 = EDGE_LOOP('',(#308324,#308325,#308333,#308341)); +#308324 = ORIENTED_EDGE('',*,*,#308302,.T.); +#308325 = ORIENTED_EDGE('',*,*,#308326,.T.); +#308326 = EDGE_CURVE('',#308294,#308327,#308329,.T.); +#308327 = VERTEX_POINT('',#308328); +#308328 = CARTESIAN_POINT('',(142.982009,-76.464421,-3.5E-02)); +#308329 = LINE('',#308330,#308331); +#308330 = CARTESIAN_POINT('',(142.442991,-76.464421,-3.5E-02)); +#308331 = VECTOR('',#308332,1.); +#308332 = DIRECTION('',(1.,0.,0.)); +#308333 = ORIENTED_EDGE('',*,*,#308334,.F.); +#308334 = EDGE_CURVE('',#308335,#308327,#308337,.T.); +#308335 = VERTEX_POINT('',#308336); +#308336 = CARTESIAN_POINT('',(142.982009,-76.464421,0.)); +#308337 = LINE('',#308338,#308339); +#308338 = CARTESIAN_POINT('',(142.982009,-76.464421,0.)); +#308339 = VECTOR('',#308340,1.); +#308340 = DIRECTION('',(0.,0.,-1.)); +#308341 = ORIENTED_EDGE('',*,*,#308342,.F.); +#308342 = EDGE_CURVE('',#308303,#308335,#308343,.T.); +#308343 = LINE('',#308344,#308345); +#308344 = CARTESIAN_POINT('',(142.442991,-76.464421,0.)); +#308345 = VECTOR('',#308346,1.); +#308346 = DIRECTION('',(1.,0.,0.)); +#308347 = PLANE('',#308348); +#308348 = AXIS2_PLACEMENT_3D('',#308349,#308350,#308351); +#308349 = CARTESIAN_POINT('',(142.442991,-76.464421,0.)); +#308350 = DIRECTION('',(0.,-1.,0.)); +#308351 = DIRECTION('',(1.,0.,0.)); +#308352 = ADVANCED_FACE('',(#308353),#308378,.F.); +#308353 = FACE_BOUND('',#308354,.F.); +#308354 = EDGE_LOOP('',(#308355,#308356,#308364,#308372)); +#308355 = ORIENTED_EDGE('',*,*,#308334,.T.); +#308356 = ORIENTED_EDGE('',*,*,#308357,.T.); +#308357 = EDGE_CURVE('',#308327,#308358,#308360,.T.); +#308358 = VERTEX_POINT('',#308359); +#308359 = CARTESIAN_POINT('',(143.018057,-76.479353,-3.5E-02)); +#308360 = LINE('',#308361,#308362); +#308361 = CARTESIAN_POINT('',(142.982009,-76.464421,-3.5E-02)); +#308362 = VECTOR('',#308363,1.); +#308363 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#308364 = ORIENTED_EDGE('',*,*,#308365,.F.); +#308365 = EDGE_CURVE('',#308366,#308358,#308368,.T.); +#308366 = VERTEX_POINT('',#308367); +#308367 = CARTESIAN_POINT('',(143.018057,-76.479353,0.)); +#308368 = LINE('',#308369,#308370); +#308369 = CARTESIAN_POINT('',(143.018057,-76.479353,0.)); +#308370 = VECTOR('',#308371,1.); +#308371 = DIRECTION('',(0.,0.,-1.)); +#308372 = ORIENTED_EDGE('',*,*,#308373,.F.); +#308373 = EDGE_CURVE('',#308335,#308366,#308374,.T.); +#308374 = LINE('',#308375,#308376); +#308375 = CARTESIAN_POINT('',(142.982009,-76.464421,0.)); +#308376 = VECTOR('',#308377,1.); +#308377 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#308378 = PLANE('',#308379); +#308379 = AXIS2_PLACEMENT_3D('',#308380,#308381,#308382); +#308380 = CARTESIAN_POINT('',(142.982009,-76.464421,0.)); +#308381 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#308382 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#308383 = ADVANCED_FACE('',(#308384),#308409,.F.); +#308384 = FACE_BOUND('',#308385,.F.); +#308385 = EDGE_LOOP('',(#308386,#308387,#308395,#308403)); +#308386 = ORIENTED_EDGE('',*,*,#308365,.T.); +#308387 = ORIENTED_EDGE('',*,*,#308388,.T.); +#308388 = EDGE_CURVE('',#308358,#308389,#308391,.T.); +#308389 = VERTEX_POINT('',#308390); +#308390 = CARTESIAN_POINT('',(143.471921,-76.930499,-3.5E-02)); +#308391 = LINE('',#308392,#308393); +#308392 = CARTESIAN_POINT('',(143.018057,-76.479353,-3.5E-02)); +#308393 = VECTOR('',#308394,1.); +#308394 = DIRECTION('',(0.709227223563,-0.704979960961,0.)); +#308395 = ORIENTED_EDGE('',*,*,#308396,.F.); +#308396 = EDGE_CURVE('',#308397,#308389,#308399,.T.); +#308397 = VERTEX_POINT('',#308398); +#308398 = CARTESIAN_POINT('',(143.471921,-76.930499,0.)); +#308399 = LINE('',#308400,#308401); +#308400 = CARTESIAN_POINT('',(143.471921,-76.930499,0.)); +#308401 = VECTOR('',#308402,1.); +#308402 = DIRECTION('',(0.,0.,-1.)); +#308403 = ORIENTED_EDGE('',*,*,#308404,.F.); +#308404 = EDGE_CURVE('',#308366,#308397,#308405,.T.); +#308405 = LINE('',#308406,#308407); +#308406 = CARTESIAN_POINT('',(143.018057,-76.479353,0.)); +#308407 = VECTOR('',#308408,1.); +#308408 = DIRECTION('',(0.709227223563,-0.704979960961,0.)); +#308409 = PLANE('',#308410); +#308410 = AXIS2_PLACEMENT_3D('',#308411,#308412,#308413); +#308411 = CARTESIAN_POINT('',(143.018057,-76.479353,0.)); +#308412 = DIRECTION('',(-0.704979960961,-0.709227223563,-0.)); +#308413 = DIRECTION('',(0.709227223563,-0.704979960961,0.)); +#308414 = ADVANCED_FACE('',(#308415),#308440,.F.); +#308415 = FACE_BOUND('',#308416,.F.); +#308416 = EDGE_LOOP('',(#308417,#308418,#308426,#308434)); +#308417 = ORIENTED_EDGE('',*,*,#308396,.T.); +#308418 = ORIENTED_EDGE('',*,*,#308419,.T.); +#308419 = EDGE_CURVE('',#308389,#308420,#308422,.T.); +#308420 = VERTEX_POINT('',#308421); +#308421 = CARTESIAN_POINT('',(143.485195,-76.922836,-3.5E-02)); +#308422 = LINE('',#308423,#308424); +#308423 = CARTESIAN_POINT('',(143.471921,-76.930499,-3.5E-02)); +#308424 = VECTOR('',#308425,1.); +#308425 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#308426 = ORIENTED_EDGE('',*,*,#308427,.F.); +#308427 = EDGE_CURVE('',#308428,#308420,#308430,.T.); +#308428 = VERTEX_POINT('',#308429); +#308429 = CARTESIAN_POINT('',(143.485195,-76.922836,0.)); +#308430 = LINE('',#308431,#308432); +#308431 = CARTESIAN_POINT('',(143.485195,-76.922836,0.)); +#308432 = VECTOR('',#308433,1.); +#308433 = DIRECTION('',(0.,0.,-1.)); +#308434 = ORIENTED_EDGE('',*,*,#308435,.F.); +#308435 = EDGE_CURVE('',#308397,#308428,#308436,.T.); +#308436 = LINE('',#308437,#308438); +#308437 = CARTESIAN_POINT('',(143.471921,-76.930499,0.)); +#308438 = VECTOR('',#308439,1.); +#308439 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#308440 = PLANE('',#308441); +#308441 = AXIS2_PLACEMENT_3D('',#308442,#308443,#308444); +#308442 = CARTESIAN_POINT('',(143.471921,-76.930499,0.)); +#308443 = DIRECTION('',(0.499963423545,-0.866046520181,0.)); +#308444 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#308445 = ADVANCED_FACE('',(#308446),#308473,.T.); +#308446 = FACE_BOUND('',#308447,.F.); +#308447 = EDGE_LOOP('',(#308448,#308449,#308458,#308466)); +#308448 = ORIENTED_EDGE('',*,*,#308427,.T.); +#308449 = ORIENTED_EDGE('',*,*,#308450,.T.); +#308450 = EDGE_CURVE('',#308420,#308451,#308453,.T.); +#308451 = VERTEX_POINT('',#308452); +#308452 = CARTESIAN_POINT('',(143.485195,-77.477164,-3.5E-02)); +#308453 = CIRCLE('',#308454,0.299999963886); +#308454 = AXIS2_PLACEMENT_3D('',#308455,#308456,#308457); +#308455 = CARTESIAN_POINT('',(143.59999959675,-77.2,-3.5E-02)); +#308456 = DIRECTION('',(0.,0.,-1.)); +#308457 = DIRECTION('',(-0.382682035242,0.923880111217,-0.)); +#308458 = ORIENTED_EDGE('',*,*,#308459,.F.); +#308459 = EDGE_CURVE('',#308460,#308451,#308462,.T.); +#308460 = VERTEX_POINT('',#308461); +#308461 = CARTESIAN_POINT('',(143.485195,-77.477164,0.)); +#308462 = LINE('',#308463,#308464); +#308463 = CARTESIAN_POINT('',(143.485195,-77.477164,0.)); +#308464 = VECTOR('',#308465,1.); +#308465 = DIRECTION('',(0.,0.,-1.)); +#308466 = ORIENTED_EDGE('',*,*,#308467,.F.); +#308467 = EDGE_CURVE('',#308428,#308460,#308468,.T.); +#308468 = CIRCLE('',#308469,0.299999963886); +#308469 = AXIS2_PLACEMENT_3D('',#308470,#308471,#308472); +#308470 = CARTESIAN_POINT('',(143.59999959675,-77.2,0.)); +#308471 = DIRECTION('',(0.,0.,-1.)); +#308472 = DIRECTION('',(-0.382682035242,0.923880111217,-0.)); +#308473 = CYLINDRICAL_SURFACE('',#308474,0.299999963886); +#308474 = AXIS2_PLACEMENT_3D('',#308475,#308476,#308477); +#308475 = CARTESIAN_POINT('',(143.59999959675,-77.2,0.)); +#308476 = DIRECTION('',(-0.,-0.,1.)); +#308477 = DIRECTION('',(-0.382682035242,0.923880111217,-0.)); +#308478 = ADVANCED_FACE('',(#308479),#308504,.F.); +#308479 = FACE_BOUND('',#308480,.F.); +#308480 = EDGE_LOOP('',(#308481,#308482,#308490,#308498)); +#308481 = ORIENTED_EDGE('',*,*,#308459,.T.); +#308482 = ORIENTED_EDGE('',*,*,#308483,.T.); +#308483 = EDGE_CURVE('',#308451,#308484,#308486,.T.); +#308484 = VERTEX_POINT('',#308485); +#308485 = CARTESIAN_POINT('',(143.471921,-77.4695,-3.5E-02)); +#308486 = LINE('',#308487,#308488); +#308487 = CARTESIAN_POINT('',(143.485195,-77.477164,-3.5E-02)); +#308488 = VECTOR('',#308489,1.); +#308489 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#308490 = ORIENTED_EDGE('',*,*,#308491,.F.); +#308491 = EDGE_CURVE('',#308492,#308484,#308494,.T.); +#308492 = VERTEX_POINT('',#308493); +#308493 = CARTESIAN_POINT('',(143.471921,-77.4695,0.)); +#308494 = LINE('',#308495,#308496); +#308495 = CARTESIAN_POINT('',(143.471921,-77.4695,0.)); +#308496 = VECTOR('',#308497,1.); +#308497 = DIRECTION('',(0.,0.,-1.)); +#308498 = ORIENTED_EDGE('',*,*,#308499,.F.); +#308499 = EDGE_CURVE('',#308460,#308492,#308500,.T.); +#308500 = LINE('',#308501,#308502); +#308501 = CARTESIAN_POINT('',(143.485195,-77.477164,0.)); +#308502 = VECTOR('',#308503,1.); +#308503 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#308504 = PLANE('',#308505); +#308505 = AXIS2_PLACEMENT_3D('',#308506,#308507,#308508); +#308506 = CARTESIAN_POINT('',(143.485195,-77.477164,0.)); +#308507 = DIRECTION('',(0.500012356406,0.866018269693,0.)); +#308508 = DIRECTION('',(-0.866018269693,0.500012356406,0.)); +#308509 = ADVANCED_FACE('',(#308510),#308535,.F.); +#308510 = FACE_BOUND('',#308511,.F.); +#308511 = EDGE_LOOP('',(#308512,#308513,#308521,#308529)); +#308512 = ORIENTED_EDGE('',*,*,#308491,.T.); +#308513 = ORIENTED_EDGE('',*,*,#308514,.T.); +#308514 = EDGE_CURVE('',#308484,#308515,#308517,.T.); +#308515 = VERTEX_POINT('',#308516); +#308516 = CARTESIAN_POINT('',(143.293057,-77.645647,-3.5E-02)); +#308517 = LINE('',#308518,#308519); +#308518 = CARTESIAN_POINT('',(143.471921,-77.4695,-3.5E-02)); +#308519 = VECTOR('',#308520,1.); +#308520 = DIRECTION('',(-0.712497604021,-0.701674542979,0.)); +#308521 = ORIENTED_EDGE('',*,*,#308522,.F.); +#308522 = EDGE_CURVE('',#308523,#308515,#308525,.T.); +#308523 = VERTEX_POINT('',#308524); +#308524 = CARTESIAN_POINT('',(143.293057,-77.645647,0.)); +#308525 = LINE('',#308526,#308527); +#308526 = CARTESIAN_POINT('',(143.293057,-77.645647,0.)); +#308527 = VECTOR('',#308528,1.); +#308528 = DIRECTION('',(0.,0.,-1.)); +#308529 = ORIENTED_EDGE('',*,*,#308530,.F.); +#308530 = EDGE_CURVE('',#308492,#308523,#308531,.T.); +#308531 = LINE('',#308532,#308533); +#308532 = CARTESIAN_POINT('',(143.471921,-77.4695,0.)); +#308533 = VECTOR('',#308534,1.); +#308534 = DIRECTION('',(-0.712497604021,-0.701674542979,0.)); +#308535 = PLANE('',#308536); +#308536 = AXIS2_PLACEMENT_3D('',#308537,#308538,#308539); +#308537 = CARTESIAN_POINT('',(143.471921,-77.4695,0.)); +#308538 = DIRECTION('',(-0.701674542979,0.712497604021,0.)); +#308539 = DIRECTION('',(-0.712497604021,-0.701674542979,0.)); +#308540 = ADVANCED_FACE('',(#308541),#308566,.F.); +#308541 = FACE_BOUND('',#308542,.F.); +#308542 = EDGE_LOOP('',(#308543,#308544,#308552,#308560)); +#308543 = ORIENTED_EDGE('',*,*,#308522,.T.); +#308544 = ORIENTED_EDGE('',*,*,#308545,.T.); +#308545 = EDGE_CURVE('',#308515,#308546,#308548,.T.); +#308546 = VERTEX_POINT('',#308547); +#308547 = CARTESIAN_POINT('',(143.257009,-77.660579,-3.5E-02)); +#308548 = LINE('',#308549,#308550); +#308549 = CARTESIAN_POINT('',(143.293057,-77.645647,-3.5E-02)); +#308550 = VECTOR('',#308551,1.); +#308551 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#308552 = ORIENTED_EDGE('',*,*,#308553,.F.); +#308553 = EDGE_CURVE('',#308554,#308546,#308556,.T.); +#308554 = VERTEX_POINT('',#308555); +#308555 = CARTESIAN_POINT('',(143.257009,-77.660579,0.)); +#308556 = LINE('',#308557,#308558); +#308557 = CARTESIAN_POINT('',(143.257009,-77.660579,0.)); +#308558 = VECTOR('',#308559,1.); +#308559 = DIRECTION('',(0.,0.,-1.)); +#308560 = ORIENTED_EDGE('',*,*,#308561,.F.); +#308561 = EDGE_CURVE('',#308523,#308554,#308562,.T.); +#308562 = LINE('',#308563,#308564); +#308563 = CARTESIAN_POINT('',(143.293057,-77.645647,0.)); +#308564 = VECTOR('',#308565,1.); +#308565 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#308566 = PLANE('',#308567); +#308567 = AXIS2_PLACEMENT_3D('',#308568,#308569,#308570); +#308568 = CARTESIAN_POINT('',(143.293057,-77.645647,0.)); +#308569 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#308570 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#308571 = ADVANCED_FACE('',(#308572),#308597,.F.); +#308572 = FACE_BOUND('',#308573,.F.); +#308573 = EDGE_LOOP('',(#308574,#308575,#308583,#308591)); +#308574 = ORIENTED_EDGE('',*,*,#308553,.T.); +#308575 = ORIENTED_EDGE('',*,*,#308576,.T.); +#308576 = EDGE_CURVE('',#308546,#308577,#308579,.T.); +#308577 = VERTEX_POINT('',#308578); +#308578 = CARTESIAN_POINT('',(142.442991,-77.660579,-3.5E-02)); +#308579 = LINE('',#308580,#308581); +#308580 = CARTESIAN_POINT('',(143.257009,-77.660579,-3.5E-02)); +#308581 = VECTOR('',#308582,1.); +#308582 = DIRECTION('',(-1.,0.,0.)); +#308583 = ORIENTED_EDGE('',*,*,#308584,.F.); +#308584 = EDGE_CURVE('',#308585,#308577,#308587,.T.); +#308585 = VERTEX_POINT('',#308586); +#308586 = CARTESIAN_POINT('',(142.442991,-77.660579,0.)); +#308587 = LINE('',#308588,#308589); +#308588 = CARTESIAN_POINT('',(142.442991,-77.660579,0.)); +#308589 = VECTOR('',#308590,1.); +#308590 = DIRECTION('',(0.,0.,-1.)); +#308591 = ORIENTED_EDGE('',*,*,#308592,.F.); +#308592 = EDGE_CURVE('',#308554,#308585,#308593,.T.); +#308593 = LINE('',#308594,#308595); +#308594 = CARTESIAN_POINT('',(143.257009,-77.660579,0.)); +#308595 = VECTOR('',#308596,1.); +#308596 = DIRECTION('',(-1.,0.,0.)); +#308597 = PLANE('',#308598); +#308598 = AXIS2_PLACEMENT_3D('',#308599,#308600,#308601); +#308599 = CARTESIAN_POINT('',(143.257009,-77.660579,0.)); +#308600 = DIRECTION('',(0.,1.,0.)); +#308601 = DIRECTION('',(-1.,0.,0.)); +#308602 = ADVANCED_FACE('',(#308603),#308630,.T.); +#308603 = FACE_BOUND('',#308604,.F.); +#308604 = EDGE_LOOP('',(#308605,#308606,#308615,#308623)); +#308605 = ORIENTED_EDGE('',*,*,#308584,.T.); +#308606 = ORIENTED_EDGE('',*,*,#308607,.T.); +#308607 = EDGE_CURVE('',#308577,#308608,#308610,.T.); +#308608 = VERTEX_POINT('',#308609); +#308609 = CARTESIAN_POINT('',(142.442991,-77.464421,-3.5E-02)); +#308610 = CIRCLE('',#308611,0.100000456609); +#308611 = AXIS2_PLACEMENT_3D('',#308612,#308613,#308614); +#308612 = CARTESIAN_POINT('',(142.4625,-77.5625,-3.5E-02)); +#308613 = DIRECTION('',(0.,0.,-1.)); +#308614 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308615 = ORIENTED_EDGE('',*,*,#308616,.F.); +#308616 = EDGE_CURVE('',#308617,#308608,#308619,.T.); +#308617 = VERTEX_POINT('',#308618); +#308618 = CARTESIAN_POINT('',(142.442991,-77.464421,0.)); +#308619 = LINE('',#308620,#308621); +#308620 = CARTESIAN_POINT('',(142.442991,-77.464421,0.)); +#308621 = VECTOR('',#308622,1.); +#308622 = DIRECTION('',(0.,0.,-1.)); +#308623 = ORIENTED_EDGE('',*,*,#308624,.F.); +#308624 = EDGE_CURVE('',#308585,#308617,#308625,.T.); +#308625 = CIRCLE('',#308626,0.100000456609); +#308626 = AXIS2_PLACEMENT_3D('',#308627,#308628,#308629); +#308627 = CARTESIAN_POINT('',(142.4625,-77.5625,0.)); +#308628 = DIRECTION('',(0.,0.,-1.)); +#308629 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308630 = CYLINDRICAL_SURFACE('',#308631,0.100000456609); +#308631 = AXIS2_PLACEMENT_3D('',#308632,#308633,#308634); +#308632 = CARTESIAN_POINT('',(142.4625,-77.5625,0.)); +#308633 = DIRECTION('',(-0.,-0.,1.)); +#308634 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308635 = ADVANCED_FACE('',(#308636),#308661,.F.); +#308636 = FACE_BOUND('',#308637,.F.); +#308637 = EDGE_LOOP('',(#308638,#308639,#308647,#308655)); +#308638 = ORIENTED_EDGE('',*,*,#308616,.T.); +#308639 = ORIENTED_EDGE('',*,*,#308640,.T.); +#308640 = EDGE_CURVE('',#308608,#308641,#308643,.T.); +#308641 = VERTEX_POINT('',#308642); +#308642 = CARTESIAN_POINT('',(143.196078,-77.4625,-3.5E-02)); +#308643 = LINE('',#308644,#308645); +#308644 = CARTESIAN_POINT('',(142.442991,-77.464421,-3.5E-02)); +#308645 = VECTOR('',#308646,1.); +#308646 = DIRECTION('',(0.999996746639,2.550825801386E-03,0.)); +#308647 = ORIENTED_EDGE('',*,*,#308648,.F.); +#308648 = EDGE_CURVE('',#308649,#308641,#308651,.T.); +#308649 = VERTEX_POINT('',#308650); +#308650 = CARTESIAN_POINT('',(143.196078,-77.4625,0.)); +#308651 = LINE('',#308652,#308653); +#308652 = CARTESIAN_POINT('',(143.196078,-77.4625,0.)); +#308653 = VECTOR('',#308654,1.); +#308654 = DIRECTION('',(0.,0.,-1.)); +#308655 = ORIENTED_EDGE('',*,*,#308656,.F.); +#308656 = EDGE_CURVE('',#308617,#308649,#308657,.T.); +#308657 = LINE('',#308658,#308659); +#308658 = CARTESIAN_POINT('',(142.442991,-77.464421,0.)); +#308659 = VECTOR('',#308660,1.); +#308660 = DIRECTION('',(0.999996746639,2.550825801386E-03,0.)); +#308661 = PLANE('',#308662); +#308662 = AXIS2_PLACEMENT_3D('',#308663,#308664,#308665); +#308663 = CARTESIAN_POINT('',(142.442991,-77.464421,0.)); +#308664 = DIRECTION('',(2.550825801386E-03,-0.999996746639,0.)); +#308665 = DIRECTION('',(0.999996746639,2.550825801386E-03,0.)); +#308666 = ADVANCED_FACE('',(#308667),#308692,.F.); +#308667 = FACE_BOUND('',#308668,.F.); +#308668 = EDGE_LOOP('',(#308669,#308670,#308678,#308686)); +#308669 = ORIENTED_EDGE('',*,*,#308648,.T.); +#308670 = ORIENTED_EDGE('',*,*,#308671,.T.); +#308671 = EDGE_CURVE('',#308641,#308672,#308674,.T.); +#308672 = VERTEX_POINT('',#308673); +#308673 = CARTESIAN_POINT('',(143.330499,-77.328078,-3.5E-02)); +#308674 = LINE('',#308675,#308676); +#308675 = CARTESIAN_POINT('',(143.196078,-77.4625,-3.5E-02)); +#308676 = VECTOR('',#308677,1.); +#308677 = DIRECTION('',(0.707104150997,0.707109411366,0.)); +#308678 = ORIENTED_EDGE('',*,*,#308679,.F.); +#308679 = EDGE_CURVE('',#308680,#308672,#308682,.T.); +#308680 = VERTEX_POINT('',#308681); +#308681 = CARTESIAN_POINT('',(143.330499,-77.328078,0.)); +#308682 = LINE('',#308683,#308684); +#308683 = CARTESIAN_POINT('',(143.330499,-77.328078,0.)); +#308684 = VECTOR('',#308685,1.); +#308685 = DIRECTION('',(0.,0.,-1.)); +#308686 = ORIENTED_EDGE('',*,*,#308687,.F.); +#308687 = EDGE_CURVE('',#308649,#308680,#308688,.T.); +#308688 = LINE('',#308689,#308690); +#308689 = CARTESIAN_POINT('',(143.196078,-77.4625,0.)); +#308690 = VECTOR('',#308691,1.); +#308691 = DIRECTION('',(0.707104150997,0.707109411366,0.)); +#308692 = PLANE('',#308693); +#308693 = AXIS2_PLACEMENT_3D('',#308694,#308695,#308696); +#308694 = CARTESIAN_POINT('',(143.196078,-77.4625,0.)); +#308695 = DIRECTION('',(0.707109411366,-0.707104150997,0.)); +#308696 = DIRECTION('',(0.707104150997,0.707109411366,0.)); +#308697 = ADVANCED_FACE('',(#308698),#308723,.F.); +#308698 = FACE_BOUND('',#308699,.F.); +#308699 = EDGE_LOOP('',(#308700,#308701,#308709,#308717)); +#308700 = ORIENTED_EDGE('',*,*,#308679,.T.); +#308701 = ORIENTED_EDGE('',*,*,#308702,.T.); +#308702 = EDGE_CURVE('',#308672,#308703,#308705,.T.); +#308703 = VERTEX_POINT('',#308704); +#308704 = CARTESIAN_POINT('',(143.322836,-77.314805,-3.5E-02)); +#308705 = LINE('',#308706,#308707); +#308706 = CARTESIAN_POINT('',(143.330499,-77.328078,-3.5E-02)); +#308707 = VECTOR('',#308708,1.); +#308708 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#308709 = ORIENTED_EDGE('',*,*,#308710,.F.); +#308710 = EDGE_CURVE('',#308711,#308703,#308713,.T.); +#308711 = VERTEX_POINT('',#308712); +#308712 = CARTESIAN_POINT('',(143.322836,-77.314805,0.)); +#308713 = LINE('',#308714,#308715); +#308714 = CARTESIAN_POINT('',(143.322836,-77.314805,0.)); +#308715 = VECTOR('',#308716,1.); +#308716 = DIRECTION('',(0.,0.,-1.)); +#308717 = ORIENTED_EDGE('',*,*,#308718,.F.); +#308718 = EDGE_CURVE('',#308680,#308711,#308719,.T.); +#308719 = LINE('',#308720,#308721); +#308720 = CARTESIAN_POINT('',(143.330499,-77.328078,0.)); +#308721 = VECTOR('',#308722,1.); +#308722 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#308723 = PLANE('',#308724); +#308724 = AXIS2_PLACEMENT_3D('',#308725,#308726,#308727); +#308725 = CARTESIAN_POINT('',(143.330499,-77.328078,0.)); +#308726 = DIRECTION('',(0.866030210228,0.499991674903,0.)); +#308727 = DIRECTION('',(-0.499991674903,0.866030210228,0.)); +#308728 = ADVANCED_FACE('',(#308729),#308754,.F.); +#308729 = FACE_BOUND('',#308730,.F.); +#308730 = EDGE_LOOP('',(#308731,#308732,#308740,#308748)); +#308731 = ORIENTED_EDGE('',*,*,#308710,.T.); +#308732 = ORIENTED_EDGE('',*,*,#308733,.T.); +#308733 = EDGE_CURVE('',#308703,#308734,#308736,.T.); +#308734 = VERTEX_POINT('',#308735); +#308735 = CARTESIAN_POINT('',(143.302567,-77.239158,-3.5E-02)); +#308736 = LINE('',#308737,#308738); +#308737 = CARTESIAN_POINT('',(143.322836,-77.314805,-3.5E-02)); +#308738 = VECTOR('',#308739,1.); +#308739 = DIRECTION('',(-0.258812462159,0.965927590159,0.)); +#308740 = ORIENTED_EDGE('',*,*,#308741,.F.); +#308741 = EDGE_CURVE('',#308742,#308734,#308744,.T.); +#308742 = VERTEX_POINT('',#308743); +#308743 = CARTESIAN_POINT('',(143.302567,-77.239158,0.)); +#308744 = LINE('',#308745,#308746); +#308745 = CARTESIAN_POINT('',(143.302567,-77.239158,0.)); +#308746 = VECTOR('',#308747,1.); +#308747 = DIRECTION('',(0.,0.,-1.)); +#308748 = ORIENTED_EDGE('',*,*,#308749,.F.); +#308749 = EDGE_CURVE('',#308711,#308742,#308750,.T.); +#308750 = LINE('',#308751,#308752); +#308751 = CARTESIAN_POINT('',(143.322836,-77.314805,0.)); +#308752 = VECTOR('',#308753,1.); +#308753 = DIRECTION('',(-0.258812462159,0.965927590159,0.)); +#308754 = PLANE('',#308755); +#308755 = AXIS2_PLACEMENT_3D('',#308756,#308757,#308758); +#308756 = CARTESIAN_POINT('',(143.322836,-77.314805,0.)); +#308757 = DIRECTION('',(0.965927590159,0.258812462159,0.)); +#308758 = DIRECTION('',(-0.258812462159,0.965927590159,0.)); +#308759 = ADVANCED_FACE('',(#308760),#308785,.F.); +#308760 = FACE_BOUND('',#308761,.F.); +#308761 = EDGE_LOOP('',(#308762,#308763,#308771,#308779)); +#308762 = ORIENTED_EDGE('',*,*,#308741,.T.); +#308763 = ORIENTED_EDGE('',*,*,#308764,.T.); +#308764 = EDGE_CURVE('',#308734,#308765,#308767,.T.); +#308765 = VERTEX_POINT('',#308766); +#308766 = CARTESIAN_POINT('',(143.302567,-77.1625,-3.5E-02)); +#308767 = LINE('',#308768,#308769); +#308768 = CARTESIAN_POINT('',(143.302567,-77.239158,-3.5E-02)); +#308769 = VECTOR('',#308770,1.); +#308770 = DIRECTION('',(0.,1.,0.)); +#308771 = ORIENTED_EDGE('',*,*,#308772,.F.); +#308772 = EDGE_CURVE('',#308773,#308765,#308775,.T.); +#308773 = VERTEX_POINT('',#308774); +#308774 = CARTESIAN_POINT('',(143.302567,-77.1625,0.)); +#308775 = LINE('',#308776,#308777); +#308776 = CARTESIAN_POINT('',(143.302567,-77.1625,0.)); +#308777 = VECTOR('',#308778,1.); +#308778 = DIRECTION('',(0.,0.,-1.)); +#308779 = ORIENTED_EDGE('',*,*,#308780,.F.); +#308780 = EDGE_CURVE('',#308742,#308773,#308781,.T.); +#308781 = LINE('',#308782,#308783); +#308782 = CARTESIAN_POINT('',(143.302567,-77.239158,0.)); +#308783 = VECTOR('',#308784,1.); +#308784 = DIRECTION('',(0.,1.,0.)); +#308785 = PLANE('',#308786); +#308786 = AXIS2_PLACEMENT_3D('',#308787,#308788,#308789); +#308787 = CARTESIAN_POINT('',(143.302567,-77.239158,0.)); +#308788 = DIRECTION('',(1.,-0.,0.)); +#308789 = DIRECTION('',(0.,1.,0.)); +#308790 = ADVANCED_FACE('',(#308791),#308816,.F.); +#308791 = FACE_BOUND('',#308792,.F.); +#308792 = EDGE_LOOP('',(#308793,#308794,#308802,#308810)); +#308793 = ORIENTED_EDGE('',*,*,#308772,.T.); +#308794 = ORIENTED_EDGE('',*,*,#308795,.T.); +#308795 = EDGE_CURVE('',#308765,#308796,#308798,.T.); +#308796 = VERTEX_POINT('',#308797); +#308797 = CARTESIAN_POINT('',(142.442991,-77.160579,-3.5E-02)); +#308798 = LINE('',#308799,#308800); +#308799 = CARTESIAN_POINT('',(143.302567,-77.1625,-3.5E-02)); +#308800 = VECTOR('',#308801,1.); +#308801 = DIRECTION('',(-0.999997502793,2.234817169001E-03,0.)); +#308802 = ORIENTED_EDGE('',*,*,#308803,.F.); +#308803 = EDGE_CURVE('',#308804,#308796,#308806,.T.); +#308804 = VERTEX_POINT('',#308805); +#308805 = CARTESIAN_POINT('',(142.442991,-77.160579,0.)); +#308806 = LINE('',#308807,#308808); +#308807 = CARTESIAN_POINT('',(142.442991,-77.160579,0.)); +#308808 = VECTOR('',#308809,1.); +#308809 = DIRECTION('',(0.,0.,-1.)); +#308810 = ORIENTED_EDGE('',*,*,#308811,.F.); +#308811 = EDGE_CURVE('',#308773,#308804,#308812,.T.); +#308812 = LINE('',#308813,#308814); +#308813 = CARTESIAN_POINT('',(143.302567,-77.1625,0.)); +#308814 = VECTOR('',#308815,1.); +#308815 = DIRECTION('',(-0.999997502793,2.234817169001E-03,0.)); +#308816 = PLANE('',#308817); +#308817 = AXIS2_PLACEMENT_3D('',#308818,#308819,#308820); +#308818 = CARTESIAN_POINT('',(143.302567,-77.1625,0.)); +#308819 = DIRECTION('',(2.234817169001E-03,0.999997502793,0.)); +#308820 = DIRECTION('',(-0.999997502793,2.234817169001E-03,0.)); +#308821 = ADVANCED_FACE('',(#308822),#308849,.T.); +#308822 = FACE_BOUND('',#308823,.F.); +#308823 = EDGE_LOOP('',(#308824,#308825,#308834,#308842)); +#308824 = ORIENTED_EDGE('',*,*,#308803,.T.); +#308825 = ORIENTED_EDGE('',*,*,#308826,.T.); +#308826 = EDGE_CURVE('',#308796,#308827,#308829,.T.); +#308827 = VERTEX_POINT('',#308828); +#308828 = CARTESIAN_POINT('',(142.442991,-76.964421,-3.5E-02)); +#308829 = CIRCLE('',#308830,0.100000456609); +#308830 = AXIS2_PLACEMENT_3D('',#308831,#308832,#308833); +#308831 = CARTESIAN_POINT('',(142.4625,-77.0625,-3.5E-02)); +#308832 = DIRECTION('',(0.,0.,-1.)); +#308833 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308834 = ORIENTED_EDGE('',*,*,#308835,.F.); +#308835 = EDGE_CURVE('',#308836,#308827,#308838,.T.); +#308836 = VERTEX_POINT('',#308837); +#308837 = CARTESIAN_POINT('',(142.442991,-76.964421,0.)); +#308838 = LINE('',#308839,#308840); +#308839 = CARTESIAN_POINT('',(142.442991,-76.964421,0.)); +#308840 = VECTOR('',#308841,1.); +#308841 = DIRECTION('',(0.,0.,-1.)); +#308842 = ORIENTED_EDGE('',*,*,#308843,.F.); +#308843 = EDGE_CURVE('',#308804,#308836,#308844,.T.); +#308844 = CIRCLE('',#308845,0.100000456609); +#308845 = AXIS2_PLACEMENT_3D('',#308846,#308847,#308848); +#308846 = CARTESIAN_POINT('',(142.4625,-77.0625,0.)); +#308847 = DIRECTION('',(0.,0.,-1.)); +#308848 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308849 = CYLINDRICAL_SURFACE('',#308850,0.100000456609); +#308850 = AXIS2_PLACEMENT_3D('',#308851,#308852,#308853); +#308851 = CARTESIAN_POINT('',(142.4625,-77.0625,0.)); +#308852 = DIRECTION('',(-0.,-0.,1.)); +#308853 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#308854 = ADVANCED_FACE('',(#308855),#308880,.F.); +#308855 = FACE_BOUND('',#308856,.F.); +#308856 = EDGE_LOOP('',(#308857,#308858,#308866,#308874)); +#308857 = ORIENTED_EDGE('',*,*,#308835,.T.); +#308858 = ORIENTED_EDGE('',*,*,#308859,.T.); +#308859 = EDGE_CURVE('',#308827,#308860,#308862,.T.); +#308860 = VERTEX_POINT('',#308861); +#308861 = CARTESIAN_POINT('',(143.221078,-76.9625,-3.5E-02)); +#308862 = LINE('',#308863,#308864); +#308863 = CARTESIAN_POINT('',(142.442991,-76.964421,-3.5E-02)); +#308864 = VECTOR('',#308865,1.); +#308865 = DIRECTION('',(0.999996952341,2.468868064165E-03,0.)); +#308866 = ORIENTED_EDGE('',*,*,#308867,.F.); +#308867 = EDGE_CURVE('',#308868,#308860,#308870,.T.); +#308868 = VERTEX_POINT('',#308869); +#308869 = CARTESIAN_POINT('',(143.221078,-76.9625,0.)); +#308870 = LINE('',#308871,#308872); +#308871 = CARTESIAN_POINT('',(143.221078,-76.9625,0.)); +#308872 = VECTOR('',#308873,1.); +#308873 = DIRECTION('',(0.,0.,-1.)); +#308874 = ORIENTED_EDGE('',*,*,#308875,.F.); +#308875 = EDGE_CURVE('',#308836,#308868,#308876,.T.); +#308876 = LINE('',#308877,#308878); +#308877 = CARTESIAN_POINT('',(142.442991,-76.964421,0.)); +#308878 = VECTOR('',#308879,1.); +#308879 = DIRECTION('',(0.999996952341,2.468868064165E-03,0.)); +#308880 = PLANE('',#308881); +#308881 = AXIS2_PLACEMENT_3D('',#308882,#308883,#308884); +#308882 = CARTESIAN_POINT('',(142.442991,-76.964421,0.)); +#308883 = DIRECTION('',(2.468868064165E-03,-0.999996952341,0.)); +#308884 = DIRECTION('',(0.999996952341,2.468868064165E-03,0.)); +#308885 = ADVANCED_FACE('',(#308886),#308911,.F.); +#308886 = FACE_BOUND('',#308887,.F.); +#308887 = EDGE_LOOP('',(#308888,#308889,#308897,#308905)); +#308888 = ORIENTED_EDGE('',*,*,#308867,.T.); +#308889 = ORIENTED_EDGE('',*,*,#308890,.T.); +#308890 = EDGE_CURVE('',#308860,#308891,#308893,.T.); +#308891 = VERTEX_POINT('',#308892); +#308892 = CARTESIAN_POINT('',(142.921078,-76.6625,-3.5E-02)); +#308893 = LINE('',#308894,#308895); +#308894 = CARTESIAN_POINT('',(143.221078,-76.9625,-3.5E-02)); +#308895 = VECTOR('',#308896,1.); +#308896 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#308897 = ORIENTED_EDGE('',*,*,#308898,.F.); +#308898 = EDGE_CURVE('',#308899,#308891,#308901,.T.); +#308899 = VERTEX_POINT('',#308900); +#308900 = CARTESIAN_POINT('',(142.921078,-76.6625,0.)); +#308901 = LINE('',#308902,#308903); +#308902 = CARTESIAN_POINT('',(142.921078,-76.6625,0.)); +#308903 = VECTOR('',#308904,1.); +#308904 = DIRECTION('',(0.,0.,-1.)); +#308905 = ORIENTED_EDGE('',*,*,#308906,.F.); +#308906 = EDGE_CURVE('',#308868,#308899,#308907,.T.); +#308907 = LINE('',#308908,#308909); +#308908 = CARTESIAN_POINT('',(143.221078,-76.9625,0.)); +#308909 = VECTOR('',#308910,1.); +#308910 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#308911 = PLANE('',#308912); +#308912 = AXIS2_PLACEMENT_3D('',#308913,#308914,#308915); +#308913 = CARTESIAN_POINT('',(143.221078,-76.9625,0.)); +#308914 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#308915 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#308916 = ADVANCED_FACE('',(#308917),#308933,.F.); +#308917 = FACE_BOUND('',#308918,.F.); +#308918 = EDGE_LOOP('',(#308919,#308920,#308926,#308927)); +#308919 = ORIENTED_EDGE('',*,*,#308898,.T.); +#308920 = ORIENTED_EDGE('',*,*,#308921,.T.); +#308921 = EDGE_CURVE('',#308891,#308286,#308922,.T.); +#308922 = LINE('',#308923,#308924); +#308923 = CARTESIAN_POINT('',(142.921078,-76.6625,-3.5E-02)); +#308924 = VECTOR('',#308925,1.); +#308925 = DIRECTION('',(-0.999991927545,4.018064688667E-03,0.)); +#308926 = ORIENTED_EDGE('',*,*,#308283,.F.); +#308927 = ORIENTED_EDGE('',*,*,#308928,.F.); +#308928 = EDGE_CURVE('',#308899,#308284,#308929,.T.); +#308929 = LINE('',#308930,#308931); +#308930 = CARTESIAN_POINT('',(142.921078,-76.6625,0.)); +#308931 = VECTOR('',#308932,1.); +#308932 = DIRECTION('',(-0.999991927545,4.018064688667E-03,0.)); +#308933 = PLANE('',#308934); +#308934 = AXIS2_PLACEMENT_3D('',#308935,#308936,#308937); +#308935 = CARTESIAN_POINT('',(142.921078,-76.6625,0.)); +#308936 = DIRECTION('',(4.018064688667E-03,0.999991927545,0.)); +#308937 = DIRECTION('',(-0.999991927545,4.018064688667E-03,0.)); +#308938 = ADVANCED_FACE('',(#308939),#308966,.F.); +#308939 = FACE_BOUND('',#308940,.F.); +#308940 = EDGE_LOOP('',(#308941,#308951,#308958,#308959)); +#308941 = ORIENTED_EDGE('',*,*,#308942,.T.); +#308942 = EDGE_CURVE('',#308943,#308945,#308947,.T.); +#308943 = VERTEX_POINT('',#308944); +#308944 = CARTESIAN_POINT('',(143.737255,-77.2,0.)); +#308945 = VERTEX_POINT('',#308946); +#308946 = CARTESIAN_POINT('',(143.737255,-77.2,-3.5E-02)); +#308947 = LINE('',#308948,#308949); +#308948 = CARTESIAN_POINT('',(143.737255,-77.2,0.)); +#308949 = VECTOR('',#308950,1.); +#308950 = DIRECTION('',(0.,0.,-1.)); +#308951 = ORIENTED_EDGE('',*,*,#308952,.T.); +#308952 = EDGE_CURVE('',#308945,#308945,#308953,.T.); +#308953 = CIRCLE('',#308954,0.137255); +#308954 = AXIS2_PLACEMENT_3D('',#308955,#308956,#308957); +#308955 = CARTESIAN_POINT('',(143.6,-77.2,-3.5E-02)); +#308956 = DIRECTION('',(0.,0.,1.)); +#308957 = DIRECTION('',(1.,0.,-0.)); +#308958 = ORIENTED_EDGE('',*,*,#308942,.F.); +#308959 = ORIENTED_EDGE('',*,*,#308960,.F.); +#308960 = EDGE_CURVE('',#308943,#308943,#308961,.T.); +#308961 = CIRCLE('',#308962,0.137255); +#308962 = AXIS2_PLACEMENT_3D('',#308963,#308964,#308965); +#308963 = CARTESIAN_POINT('',(143.6,-77.2,0.)); +#308964 = DIRECTION('',(0.,0.,1.)); +#308965 = DIRECTION('',(1.,0.,-0.)); +#308966 = CYLINDRICAL_SURFACE('',#308967,0.137255); +#308967 = AXIS2_PLACEMENT_3D('',#308968,#308969,#308970); +#308968 = CARTESIAN_POINT('',(143.6,-77.2,0.)); +#308969 = DIRECTION('',(0.,0.,1.)); +#308970 = DIRECTION('',(1.,0.,-0.)); +#308971 = ADVANCED_FACE('',(#308972,#308995),#308998,.F.); +#308972 = FACE_BOUND('',#308973,.F.); +#308973 = EDGE_LOOP('',(#308974,#308975,#308976,#308977,#308978,#308979, + #308980,#308981,#308982,#308983,#308984,#308985,#308986,#308987, + #308988,#308989,#308990,#308991,#308992,#308993,#308994)); +#308974 = ORIENTED_EDGE('',*,*,#308310,.T.); +#308975 = ORIENTED_EDGE('',*,*,#308342,.T.); +#308976 = ORIENTED_EDGE('',*,*,#308373,.T.); +#308977 = ORIENTED_EDGE('',*,*,#308404,.T.); +#308978 = ORIENTED_EDGE('',*,*,#308435,.T.); +#308979 = ORIENTED_EDGE('',*,*,#308467,.T.); +#308980 = ORIENTED_EDGE('',*,*,#308499,.T.); +#308981 = ORIENTED_EDGE('',*,*,#308530,.T.); +#308982 = ORIENTED_EDGE('',*,*,#308561,.T.); +#308983 = ORIENTED_EDGE('',*,*,#308592,.T.); +#308984 = ORIENTED_EDGE('',*,*,#308624,.T.); +#308985 = ORIENTED_EDGE('',*,*,#308656,.T.); +#308986 = ORIENTED_EDGE('',*,*,#308687,.T.); +#308987 = ORIENTED_EDGE('',*,*,#308718,.T.); +#308988 = ORIENTED_EDGE('',*,*,#308749,.T.); +#308989 = ORIENTED_EDGE('',*,*,#308780,.T.); +#308990 = ORIENTED_EDGE('',*,*,#308811,.T.); +#308991 = ORIENTED_EDGE('',*,*,#308843,.T.); +#308992 = ORIENTED_EDGE('',*,*,#308875,.T.); +#308993 = ORIENTED_EDGE('',*,*,#308906,.T.); +#308994 = ORIENTED_EDGE('',*,*,#308928,.T.); +#308995 = FACE_BOUND('',#308996,.F.); +#308996 = EDGE_LOOP('',(#308997)); +#308997 = ORIENTED_EDGE('',*,*,#308960,.T.); +#308998 = PLANE('',#308999); +#308999 = AXIS2_PLACEMENT_3D('',#309000,#309001,#309002); +#309000 = CARTESIAN_POINT('',(0.,0.,0.)); +#309001 = DIRECTION('',(-0.,-0.,-1.)); +#309002 = DIRECTION('',(-1.,0.,0.)); +#309003 = ADVANCED_FACE('',(#309004,#309027),#309030,.T.); +#309004 = FACE_BOUND('',#309005,.T.); +#309005 = EDGE_LOOP('',(#309006,#309007,#309008,#309009,#309010,#309011, + #309012,#309013,#309014,#309015,#309016,#309017,#309018,#309019, + #309020,#309021,#309022,#309023,#309024,#309025,#309026)); +#309006 = ORIENTED_EDGE('',*,*,#308293,.T.); +#309007 = ORIENTED_EDGE('',*,*,#308326,.T.); +#309008 = ORIENTED_EDGE('',*,*,#308357,.T.); +#309009 = ORIENTED_EDGE('',*,*,#308388,.T.); +#309010 = ORIENTED_EDGE('',*,*,#308419,.T.); +#309011 = ORIENTED_EDGE('',*,*,#308450,.T.); +#309012 = ORIENTED_EDGE('',*,*,#308483,.T.); +#309013 = ORIENTED_EDGE('',*,*,#308514,.T.); +#309014 = ORIENTED_EDGE('',*,*,#308545,.T.); +#309015 = ORIENTED_EDGE('',*,*,#308576,.T.); +#309016 = ORIENTED_EDGE('',*,*,#308607,.T.); +#309017 = ORIENTED_EDGE('',*,*,#308640,.T.); +#309018 = ORIENTED_EDGE('',*,*,#308671,.T.); +#309019 = ORIENTED_EDGE('',*,*,#308702,.T.); +#309020 = ORIENTED_EDGE('',*,*,#308733,.T.); +#309021 = ORIENTED_EDGE('',*,*,#308764,.T.); +#309022 = ORIENTED_EDGE('',*,*,#308795,.T.); +#309023 = ORIENTED_EDGE('',*,*,#308826,.T.); +#309024 = ORIENTED_EDGE('',*,*,#308859,.T.); +#309025 = ORIENTED_EDGE('',*,*,#308890,.T.); +#309026 = ORIENTED_EDGE('',*,*,#308921,.T.); +#309027 = FACE_BOUND('',#309028,.T.); +#309028 = EDGE_LOOP('',(#309029)); +#309029 = ORIENTED_EDGE('',*,*,#308952,.T.); +#309030 = PLANE('',#309031); +#309031 = AXIS2_PLACEMENT_3D('',#309032,#309033,#309034); +#309032 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#309033 = DIRECTION('',(-0.,-0.,-1.)); +#309034 = DIRECTION('',(-1.,0.,0.)); +#309035 = MANIFOLD_SOLID_BREP('',#309036); +#309036 = CLOSED_SHELL('',(#309037,#309077,#309108,#309139,#309172, + #309203,#309236,#309267,#309298,#309329,#309362,#309393,#309424, + #309455,#309486,#309517,#309550,#309581,#309612,#309643,#309676, + #309698,#309731,#309763)); +#309037 = ADVANCED_FACE('',(#309038),#309072,.F.); +#309038 = FACE_BOUND('',#309039,.F.); +#309039 = EDGE_LOOP('',(#309040,#309050,#309058,#309066)); +#309040 = ORIENTED_EDGE('',*,*,#309041,.T.); +#309041 = EDGE_CURVE('',#309042,#309044,#309046,.T.); +#309042 = VERTEX_POINT('',#309043); +#309043 = CARTESIAN_POINT('',(138.9,-75.88113,0.)); +#309044 = VERTEX_POINT('',#309045); +#309045 = CARTESIAN_POINT('',(138.9,-75.88113,-3.5E-02)); +#309046 = LINE('',#309047,#309048); +#309047 = CARTESIAN_POINT('',(138.9,-75.88113,0.)); +#309048 = VECTOR('',#309049,1.); +#309049 = DIRECTION('',(0.,0.,-1.)); +#309050 = ORIENTED_EDGE('',*,*,#309051,.T.); +#309051 = EDGE_CURVE('',#309044,#309052,#309054,.T.); +#309052 = VERTEX_POINT('',#309053); +#309053 = CARTESIAN_POINT('',(138.9,-76.469802,-3.5E-02)); +#309054 = LINE('',#309055,#309056); +#309055 = CARTESIAN_POINT('',(138.9,-75.88113,-3.5E-02)); +#309056 = VECTOR('',#309057,1.); +#309057 = DIRECTION('',(0.,-1.,0.)); +#309058 = ORIENTED_EDGE('',*,*,#309059,.F.); +#309059 = EDGE_CURVE('',#309060,#309052,#309062,.T.); +#309060 = VERTEX_POINT('',#309061); +#309061 = CARTESIAN_POINT('',(138.9,-76.469802,0.)); +#309062 = LINE('',#309063,#309064); +#309063 = CARTESIAN_POINT('',(138.9,-76.469802,0.)); +#309064 = VECTOR('',#309065,1.); +#309065 = DIRECTION('',(0.,0.,-1.)); +#309066 = ORIENTED_EDGE('',*,*,#309067,.F.); +#309067 = EDGE_CURVE('',#309042,#309060,#309068,.T.); +#309068 = LINE('',#309069,#309070); +#309069 = CARTESIAN_POINT('',(138.9,-75.88113,0.)); +#309070 = VECTOR('',#309071,1.); +#309071 = DIRECTION('',(0.,-1.,0.)); +#309072 = PLANE('',#309073); +#309073 = AXIS2_PLACEMENT_3D('',#309074,#309075,#309076); +#309074 = CARTESIAN_POINT('',(138.9,-75.88113,0.)); +#309075 = DIRECTION('',(-1.,-0.,-0.)); +#309076 = DIRECTION('',(0.,-1.,0.)); +#309077 = ADVANCED_FACE('',(#309078),#309103,.F.); +#309078 = FACE_BOUND('',#309079,.F.); +#309079 = EDGE_LOOP('',(#309080,#309081,#309089,#309097)); +#309080 = ORIENTED_EDGE('',*,*,#309059,.T.); +#309081 = ORIENTED_EDGE('',*,*,#309082,.T.); +#309082 = EDGE_CURVE('',#309052,#309083,#309085,.T.); +#309083 = VERTEX_POINT('',#309084); +#309084 = CARTESIAN_POINT('',(138.9325,-76.4625,-3.5E-02)); +#309085 = LINE('',#309086,#309087); +#309086 = CARTESIAN_POINT('',(138.9,-76.469802,-3.5E-02)); +#309087 = VECTOR('',#309088,1.); +#309088 = DIRECTION('',(0.975677216665,0.219212154956,0.)); +#309089 = ORIENTED_EDGE('',*,*,#309090,.F.); +#309090 = EDGE_CURVE('',#309091,#309083,#309093,.T.); +#309091 = VERTEX_POINT('',#309092); +#309092 = CARTESIAN_POINT('',(138.9325,-76.4625,0.)); +#309093 = LINE('',#309094,#309095); +#309094 = CARTESIAN_POINT('',(138.9325,-76.4625,0.)); +#309095 = VECTOR('',#309096,1.); +#309096 = DIRECTION('',(0.,0.,-1.)); +#309097 = ORIENTED_EDGE('',*,*,#309098,.F.); +#309098 = EDGE_CURVE('',#309060,#309091,#309099,.T.); +#309099 = LINE('',#309100,#309101); +#309100 = CARTESIAN_POINT('',(138.9,-76.469802,0.)); +#309101 = VECTOR('',#309102,1.); +#309102 = DIRECTION('',(0.975677216665,0.219212154956,0.)); +#309103 = PLANE('',#309104); +#309104 = AXIS2_PLACEMENT_3D('',#309105,#309106,#309107); +#309105 = CARTESIAN_POINT('',(138.9,-76.469802,0.)); +#309106 = DIRECTION('',(0.219212154956,-0.975677216665,0.)); +#309107 = DIRECTION('',(0.975677216665,0.219212154956,0.)); +#309108 = ADVANCED_FACE('',(#309109),#309134,.F.); +#309109 = FACE_BOUND('',#309110,.F.); +#309110 = EDGE_LOOP('',(#309111,#309112,#309120,#309128)); +#309111 = ORIENTED_EDGE('',*,*,#309090,.T.); +#309112 = ORIENTED_EDGE('',*,*,#309113,.T.); +#309113 = EDGE_CURVE('',#309083,#309114,#309116,.T.); +#309114 = VERTEX_POINT('',#309115); +#309115 = CARTESIAN_POINT('',(140.157009,-76.464421,-3.5E-02)); +#309116 = LINE('',#309117,#309118); +#309117 = CARTESIAN_POINT('',(138.9325,-76.4625,-3.5E-02)); +#309118 = VECTOR('',#309119,1.); +#309119 = DIRECTION('',(0.999998769448,-1.568790132294E-03,0.)); +#309120 = ORIENTED_EDGE('',*,*,#309121,.F.); +#309121 = EDGE_CURVE('',#309122,#309114,#309124,.T.); +#309122 = VERTEX_POINT('',#309123); +#309123 = CARTESIAN_POINT('',(140.157009,-76.464421,0.)); +#309124 = LINE('',#309125,#309126); +#309125 = CARTESIAN_POINT('',(140.157009,-76.464421,0.)); +#309126 = VECTOR('',#309127,1.); +#309127 = DIRECTION('',(0.,0.,-1.)); +#309128 = ORIENTED_EDGE('',*,*,#309129,.F.); +#309129 = EDGE_CURVE('',#309091,#309122,#309130,.T.); +#309130 = LINE('',#309131,#309132); +#309131 = CARTESIAN_POINT('',(138.9325,-76.4625,0.)); +#309132 = VECTOR('',#309133,1.); +#309133 = DIRECTION('',(0.999998769448,-1.568790132294E-03,0.)); +#309134 = PLANE('',#309135); +#309135 = AXIS2_PLACEMENT_3D('',#309136,#309137,#309138); +#309136 = CARTESIAN_POINT('',(138.9325,-76.4625,0.)); +#309137 = DIRECTION('',(-1.568790132294E-03,-0.999998769448,-0.)); +#309138 = DIRECTION('',(0.999998769448,-1.568790132294E-03,0.)); +#309139 = ADVANCED_FACE('',(#309140),#309167,.T.); +#309140 = FACE_BOUND('',#309141,.F.); +#309141 = EDGE_LOOP('',(#309142,#309143,#309152,#309160)); +#309142 = ORIENTED_EDGE('',*,*,#309121,.T.); +#309143 = ORIENTED_EDGE('',*,*,#309144,.T.); +#309144 = EDGE_CURVE('',#309114,#309145,#309147,.T.); +#309145 = VERTEX_POINT('',#309146); +#309146 = CARTESIAN_POINT('',(140.235579,-76.542991,-3.5E-02)); +#309147 = CIRCLE('',#309148,0.100002891901); +#309148 = AXIS2_PLACEMENT_3D('',#309149,#309150,#309151); +#309149 = CARTESIAN_POINT('',(140.13749792896,-76.56250207103,-3.5E-02) + ); +#309150 = DIRECTION('',(0.,0.,-1.)); +#309151 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#309152 = ORIENTED_EDGE('',*,*,#309153,.F.); +#309153 = EDGE_CURVE('',#309154,#309145,#309156,.T.); +#309154 = VERTEX_POINT('',#309155); +#309155 = CARTESIAN_POINT('',(140.235579,-76.542991,0.)); +#309156 = LINE('',#309157,#309158); +#309157 = CARTESIAN_POINT('',(140.235579,-76.542991,0.)); +#309158 = VECTOR('',#309159,1.); +#309159 = DIRECTION('',(0.,0.,-1.)); +#309160 = ORIENTED_EDGE('',*,*,#309161,.F.); +#309161 = EDGE_CURVE('',#309122,#309154,#309162,.T.); +#309162 = CIRCLE('',#309163,0.100002891901); +#309163 = AXIS2_PLACEMENT_3D('',#309164,#309165,#309166); +#309164 = CARTESIAN_POINT('',(140.13749792896,-76.56250207103,0.)); +#309165 = DIRECTION('',(0.,0.,-1.)); +#309166 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#309167 = CYLINDRICAL_SURFACE('',#309168,0.100002891901); +#309168 = AXIS2_PLACEMENT_3D('',#309169,#309170,#309171); +#309169 = CARTESIAN_POINT('',(140.13749792896,-76.56250207103,0.)); +#309170 = DIRECTION('',(-0.,-0.,1.)); +#309171 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#309172 = ADVANCED_FACE('',(#309173),#309198,.F.); +#309173 = FACE_BOUND('',#309174,.F.); +#309174 = EDGE_LOOP('',(#309175,#309176,#309184,#309192)); +#309175 = ORIENTED_EDGE('',*,*,#309153,.T.); +#309176 = ORIENTED_EDGE('',*,*,#309177,.T.); +#309177 = EDGE_CURVE('',#309145,#309178,#309180,.T.); +#309178 = VERTEX_POINT('',#309179); +#309179 = CARTESIAN_POINT('',(140.235579,-77.082009,-3.5E-02)); +#309180 = LINE('',#309181,#309182); +#309181 = CARTESIAN_POINT('',(140.235579,-76.542991,-3.5E-02)); +#309182 = VECTOR('',#309183,1.); +#309183 = DIRECTION('',(0.,-1.,0.)); +#309184 = ORIENTED_EDGE('',*,*,#309185,.F.); +#309185 = EDGE_CURVE('',#309186,#309178,#309188,.T.); +#309186 = VERTEX_POINT('',#309187); +#309187 = CARTESIAN_POINT('',(140.235579,-77.082009,0.)); +#309188 = LINE('',#309189,#309190); +#309189 = CARTESIAN_POINT('',(140.235579,-77.082009,0.)); +#309190 = VECTOR('',#309191,1.); +#309191 = DIRECTION('',(0.,0.,-1.)); +#309192 = ORIENTED_EDGE('',*,*,#309193,.F.); +#309193 = EDGE_CURVE('',#309154,#309186,#309194,.T.); +#309194 = LINE('',#309195,#309196); +#309195 = CARTESIAN_POINT('',(140.235579,-76.542991,0.)); +#309196 = VECTOR('',#309197,1.); +#309197 = DIRECTION('',(0.,-1.,0.)); +#309198 = PLANE('',#309199); +#309199 = AXIS2_PLACEMENT_3D('',#309200,#309201,#309202); +#309200 = CARTESIAN_POINT('',(140.235579,-76.542991,0.)); +#309201 = DIRECTION('',(-1.,-0.,-0.)); +#309202 = DIRECTION('',(0.,-1.,0.)); +#309203 = ADVANCED_FACE('',(#309204),#309231,.T.); +#309204 = FACE_BOUND('',#309205,.F.); +#309205 = EDGE_LOOP('',(#309206,#309207,#309216,#309224)); +#309206 = ORIENTED_EDGE('',*,*,#309185,.T.); +#309207 = ORIENTED_EDGE('',*,*,#309208,.T.); +#309208 = EDGE_CURVE('',#309178,#309209,#309211,.T.); +#309209 = VERTEX_POINT('',#309210); +#309210 = CARTESIAN_POINT('',(140.039421,-77.082009,-3.5E-02)); +#309211 = CIRCLE('',#309212,0.100000456609); +#309212 = AXIS2_PLACEMENT_3D('',#309213,#309214,#309215); +#309213 = CARTESIAN_POINT('',(140.1375,-77.0625,-3.5E-02)); +#309214 = DIRECTION('',(-0.,0.,-1.)); +#309215 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#309216 = ORIENTED_EDGE('',*,*,#309217,.F.); +#309217 = EDGE_CURVE('',#309218,#309209,#309220,.T.); +#309218 = VERTEX_POINT('',#309219); +#309219 = CARTESIAN_POINT('',(140.039421,-77.082009,0.)); +#309220 = LINE('',#309221,#309222); +#309221 = CARTESIAN_POINT('',(140.039421,-77.082009,0.)); +#309222 = VECTOR('',#309223,1.); +#309223 = DIRECTION('',(0.,0.,-1.)); +#309224 = ORIENTED_EDGE('',*,*,#309225,.F.); +#309225 = EDGE_CURVE('',#309186,#309218,#309226,.T.); +#309226 = CIRCLE('',#309227,0.100000456609); +#309227 = AXIS2_PLACEMENT_3D('',#309228,#309229,#309230); +#309228 = CARTESIAN_POINT('',(140.1375,-77.0625,0.)); +#309229 = DIRECTION('',(-0.,0.,-1.)); +#309230 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#309231 = CYLINDRICAL_SURFACE('',#309232,0.100000456609); +#309232 = AXIS2_PLACEMENT_3D('',#309233,#309234,#309235); +#309233 = CARTESIAN_POINT('',(140.1375,-77.0625,0.)); +#309234 = DIRECTION('',(0.,-0.,1.)); +#309235 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#309236 = ADVANCED_FACE('',(#309237),#309262,.F.); +#309237 = FACE_BOUND('',#309238,.F.); +#309238 = EDGE_LOOP('',(#309239,#309240,#309248,#309256)); +#309239 = ORIENTED_EDGE('',*,*,#309217,.T.); +#309240 = ORIENTED_EDGE('',*,*,#309241,.T.); +#309241 = EDGE_CURVE('',#309209,#309242,#309244,.T.); +#309242 = VERTEX_POINT('',#309243); +#309243 = CARTESIAN_POINT('',(140.0375,-76.6625,-3.5E-02)); +#309244 = LINE('',#309245,#309246); +#309245 = CARTESIAN_POINT('',(140.039421,-77.082009,-3.5E-02)); +#309246 = VECTOR('',#309247,1.); +#309247 = DIRECTION('',(-4.579114774319E-03,0.999989515799,0.)); +#309248 = ORIENTED_EDGE('',*,*,#309249,.F.); +#309249 = EDGE_CURVE('',#309250,#309242,#309252,.T.); +#309250 = VERTEX_POINT('',#309251); +#309251 = CARTESIAN_POINT('',(140.0375,-76.6625,0.)); +#309252 = LINE('',#309253,#309254); +#309253 = CARTESIAN_POINT('',(140.0375,-76.6625,0.)); +#309254 = VECTOR('',#309255,1.); +#309255 = DIRECTION('',(0.,0.,-1.)); +#309256 = ORIENTED_EDGE('',*,*,#309257,.F.); +#309257 = EDGE_CURVE('',#309218,#309250,#309258,.T.); +#309258 = LINE('',#309259,#309260); +#309259 = CARTESIAN_POINT('',(140.039421,-77.082009,0.)); +#309260 = VECTOR('',#309261,1.); +#309261 = DIRECTION('',(-4.579114774319E-03,0.999989515799,0.)); +#309262 = PLANE('',#309263); +#309263 = AXIS2_PLACEMENT_3D('',#309264,#309265,#309266); +#309264 = CARTESIAN_POINT('',(140.039421,-77.082009,0.)); +#309265 = DIRECTION('',(0.999989515799,4.579114774319E-03,0.)); +#309266 = DIRECTION('',(-4.579114774319E-03,0.999989515799,0.)); +#309267 = ADVANCED_FACE('',(#309268),#309293,.F.); +#309268 = FACE_BOUND('',#309269,.F.); +#309269 = EDGE_LOOP('',(#309270,#309271,#309279,#309287)); +#309270 = ORIENTED_EDGE('',*,*,#309249,.T.); +#309271 = ORIENTED_EDGE('',*,*,#309272,.T.); +#309272 = EDGE_CURVE('',#309242,#309273,#309275,.T.); +#309273 = VERTEX_POINT('',#309274); +#309274 = CARTESIAN_POINT('',(138.973921,-76.6625,-3.5E-02)); +#309275 = LINE('',#309276,#309277); +#309276 = CARTESIAN_POINT('',(140.0375,-76.6625,-3.5E-02)); +#309277 = VECTOR('',#309278,1.); +#309278 = DIRECTION('',(-1.,0.,0.)); +#309279 = ORIENTED_EDGE('',*,*,#309280,.F.); +#309280 = EDGE_CURVE('',#309281,#309273,#309283,.T.); +#309281 = VERTEX_POINT('',#309282); +#309282 = CARTESIAN_POINT('',(138.973921,-76.6625,0.)); +#309283 = LINE('',#309284,#309285); +#309284 = CARTESIAN_POINT('',(138.973921,-76.6625,0.)); +#309285 = VECTOR('',#309286,1.); +#309286 = DIRECTION('',(0.,0.,-1.)); +#309287 = ORIENTED_EDGE('',*,*,#309288,.F.); +#309288 = EDGE_CURVE('',#309250,#309281,#309289,.T.); +#309289 = LINE('',#309290,#309291); +#309290 = CARTESIAN_POINT('',(140.0375,-76.6625,0.)); +#309291 = VECTOR('',#309292,1.); +#309292 = DIRECTION('',(-1.,0.,0.)); +#309293 = PLANE('',#309294); +#309294 = AXIS2_PLACEMENT_3D('',#309295,#309296,#309297); +#309295 = CARTESIAN_POINT('',(140.0375,-76.6625,0.)); +#309296 = DIRECTION('',(0.,1.,0.)); +#309297 = DIRECTION('',(-1.,0.,0.)); +#309298 = ADVANCED_FACE('',(#309299),#309324,.F.); +#309299 = FACE_BOUND('',#309300,.F.); +#309300 = EDGE_LOOP('',(#309301,#309302,#309310,#309318)); +#309301 = ORIENTED_EDGE('',*,*,#309280,.T.); +#309302 = ORIENTED_EDGE('',*,*,#309303,.T.); +#309303 = EDGE_CURVE('',#309273,#309304,#309306,.T.); +#309304 = VERTEX_POINT('',#309305); +#309305 = CARTESIAN_POINT('',(138.855557,-76.778147,-3.5E-02)); +#309306 = LINE('',#309307,#309308); +#309307 = CARTESIAN_POINT('',(138.973921,-76.6625,-3.5E-02)); +#309308 = VECTOR('',#309309,1.); +#309309 = DIRECTION('',(-0.715268481314,-0.698849769005,0.)); +#309310 = ORIENTED_EDGE('',*,*,#309311,.F.); +#309311 = EDGE_CURVE('',#309312,#309304,#309314,.T.); +#309312 = VERTEX_POINT('',#309313); +#309313 = CARTESIAN_POINT('',(138.855557,-76.778147,0.)); +#309314 = LINE('',#309315,#309316); +#309315 = CARTESIAN_POINT('',(138.855557,-76.778147,0.)); +#309316 = VECTOR('',#309317,1.); +#309317 = DIRECTION('',(0.,0.,-1.)); +#309318 = ORIENTED_EDGE('',*,*,#309319,.F.); +#309319 = EDGE_CURVE('',#309281,#309312,#309320,.T.); +#309320 = LINE('',#309321,#309322); +#309321 = CARTESIAN_POINT('',(138.973921,-76.6625,0.)); +#309322 = VECTOR('',#309323,1.); +#309323 = DIRECTION('',(-0.715268481314,-0.698849769005,0.)); +#309324 = PLANE('',#309325); +#309325 = AXIS2_PLACEMENT_3D('',#309326,#309327,#309328); +#309326 = CARTESIAN_POINT('',(138.973921,-76.6625,0.)); +#309327 = DIRECTION('',(-0.698849769005,0.715268481314,0.)); +#309328 = DIRECTION('',(-0.715268481314,-0.698849769005,0.)); +#309329 = ADVANCED_FACE('',(#309330),#309357,.T.); +#309330 = FACE_BOUND('',#309331,.F.); +#309331 = EDGE_LOOP('',(#309332,#309333,#309342,#309350)); +#309332 = ORIENTED_EDGE('',*,*,#309311,.T.); +#309333 = ORIENTED_EDGE('',*,*,#309334,.T.); +#309334 = EDGE_CURVE('',#309304,#309335,#309337,.T.); +#309335 = VERTEX_POINT('',#309336); +#309336 = CARTESIAN_POINT('',(138.701921,-76.714509,-3.5E-02)); +#309337 = CIRCLE('',#309338,9.999988522644E-02); +#309338 = AXIS2_PLACEMENT_3D('',#309339,#309340,#309341); +#309339 = CARTESIAN_POINT('',(138.79999951407,-76.69500048592,-3.5E-02) + ); +#309340 = DIRECTION('',(-0.,0.,-1.)); +#309341 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#309342 = ORIENTED_EDGE('',*,*,#309343,.F.); +#309343 = EDGE_CURVE('',#309344,#309335,#309346,.T.); +#309344 = VERTEX_POINT('',#309345); +#309345 = CARTESIAN_POINT('',(138.701921,-76.714509,0.)); +#309346 = LINE('',#309347,#309348); +#309347 = CARTESIAN_POINT('',(138.701921,-76.714509,0.)); +#309348 = VECTOR('',#309349,1.); +#309349 = DIRECTION('',(0.,0.,-1.)); +#309350 = ORIENTED_EDGE('',*,*,#309351,.F.); +#309351 = EDGE_CURVE('',#309312,#309344,#309352,.T.); +#309352 = CIRCLE('',#309353,9.999988522644E-02); +#309353 = AXIS2_PLACEMENT_3D('',#309354,#309355,#309356); +#309354 = CARTESIAN_POINT('',(138.79999951407,-76.69500048592,0.)); +#309355 = DIRECTION('',(-0.,0.,-1.)); +#309356 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#309357 = CYLINDRICAL_SURFACE('',#309358,9.999988522644E-02); +#309358 = AXIS2_PLACEMENT_3D('',#309359,#309360,#309361); +#309359 = CARTESIAN_POINT('',(138.79999951407,-76.69500048592,0.)); +#309360 = DIRECTION('',(0.,-0.,1.)); +#309361 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#309362 = ADVANCED_FACE('',(#309363),#309388,.F.); +#309363 = FACE_BOUND('',#309364,.F.); +#309364 = EDGE_LOOP('',(#309365,#309366,#309374,#309382)); +#309365 = ORIENTED_EDGE('',*,*,#309343,.T.); +#309366 = ORIENTED_EDGE('',*,*,#309367,.T.); +#309367 = EDGE_CURVE('',#309335,#309368,#309370,.T.); +#309368 = VERTEX_POINT('',#309369); +#309369 = CARTESIAN_POINT('',(138.7,-75.88113,-3.5E-02)); +#309370 = LINE('',#309371,#309372); +#309371 = CARTESIAN_POINT('',(138.701921,-76.714509,-3.5E-02)); +#309372 = VECTOR('',#309373,1.); +#309373 = DIRECTION('',(-2.30506755815E-03,0.999997343328,0.)); +#309374 = ORIENTED_EDGE('',*,*,#309375,.F.); +#309375 = EDGE_CURVE('',#309376,#309368,#309378,.T.); +#309376 = VERTEX_POINT('',#309377); +#309377 = CARTESIAN_POINT('',(138.7,-75.88113,0.)); +#309378 = LINE('',#309379,#309380); +#309379 = CARTESIAN_POINT('',(138.7,-75.88113,0.)); +#309380 = VECTOR('',#309381,1.); +#309381 = DIRECTION('',(0.,0.,-1.)); +#309382 = ORIENTED_EDGE('',*,*,#309383,.F.); +#309383 = EDGE_CURVE('',#309344,#309376,#309384,.T.); +#309384 = LINE('',#309385,#309386); +#309385 = CARTESIAN_POINT('',(138.701921,-76.714509,0.)); +#309386 = VECTOR('',#309387,1.); +#309387 = DIRECTION('',(-2.30506755815E-03,0.999997343328,0.)); +#309388 = PLANE('',#309389); +#309389 = AXIS2_PLACEMENT_3D('',#309390,#309391,#309392); +#309390 = CARTESIAN_POINT('',(138.701921,-76.714509,0.)); +#309391 = DIRECTION('',(0.999997343328,2.30506755815E-03,0.)); +#309392 = DIRECTION('',(-2.30506755815E-03,0.999997343328,0.)); +#309393 = ADVANCED_FACE('',(#309394),#309419,.F.); +#309394 = FACE_BOUND('',#309395,.F.); +#309395 = EDGE_LOOP('',(#309396,#309397,#309405,#309413)); +#309396 = ORIENTED_EDGE('',*,*,#309375,.T.); +#309397 = ORIENTED_EDGE('',*,*,#309398,.T.); +#309398 = EDGE_CURVE('',#309368,#309399,#309401,.T.); +#309399 = VERTEX_POINT('',#309400); +#309400 = CARTESIAN_POINT('',(138.671921,-75.8695,-3.5E-02)); +#309401 = LINE('',#309402,#309403); +#309402 = CARTESIAN_POINT('',(138.7,-75.88113,-3.5E-02)); +#309403 = VECTOR('',#309404,1.); +#309404 = DIRECTION('',(-0.92388770587,0.382663699536,0.)); +#309405 = ORIENTED_EDGE('',*,*,#309406,.F.); +#309406 = EDGE_CURVE('',#309407,#309399,#309409,.T.); +#309407 = VERTEX_POINT('',#309408); +#309408 = CARTESIAN_POINT('',(138.671921,-75.8695,0.)); +#309409 = LINE('',#309410,#309411); +#309410 = CARTESIAN_POINT('',(138.671921,-75.8695,0.)); +#309411 = VECTOR('',#309412,1.); +#309412 = DIRECTION('',(0.,0.,-1.)); +#309413 = ORIENTED_EDGE('',*,*,#309414,.F.); +#309414 = EDGE_CURVE('',#309376,#309407,#309415,.T.); +#309415 = LINE('',#309416,#309417); +#309416 = CARTESIAN_POINT('',(138.7,-75.88113,0.)); +#309417 = VECTOR('',#309418,1.); +#309418 = DIRECTION('',(-0.92388770587,0.382663699536,0.)); +#309419 = PLANE('',#309420); +#309420 = AXIS2_PLACEMENT_3D('',#309421,#309422,#309423); +#309421 = CARTESIAN_POINT('',(138.7,-75.88113,0.)); +#309422 = DIRECTION('',(0.382663699536,0.92388770587,0.)); +#309423 = DIRECTION('',(-0.92388770587,0.382663699536,0.)); +#309424 = ADVANCED_FACE('',(#309425),#309450,.F.); +#309425 = FACE_BOUND('',#309426,.F.); +#309426 = EDGE_LOOP('',(#309427,#309428,#309436,#309444)); +#309427 = ORIENTED_EDGE('',*,*,#309406,.T.); +#309428 = ORIENTED_EDGE('',*,*,#309429,.T.); +#309429 = EDGE_CURVE('',#309399,#309430,#309432,.T.); +#309430 = VERTEX_POINT('',#309431); +#309431 = CARTESIAN_POINT('',(138.055557,-76.483147,-3.5E-02)); +#309432 = LINE('',#309433,#309434); +#309433 = CARTESIAN_POINT('',(138.671921,-75.8695,-3.5E-02)); +#309434 = VECTOR('',#309435,1.); +#309435 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#309436 = ORIENTED_EDGE('',*,*,#309437,.F.); +#309437 = EDGE_CURVE('',#309438,#309430,#309440,.T.); +#309438 = VERTEX_POINT('',#309439); +#309439 = CARTESIAN_POINT('',(138.055557,-76.483147,0.)); +#309440 = LINE('',#309441,#309442); +#309441 = CARTESIAN_POINT('',(138.055557,-76.483147,0.)); +#309442 = VECTOR('',#309443,1.); +#309443 = DIRECTION('',(0.,0.,-1.)); +#309444 = ORIENTED_EDGE('',*,*,#309445,.F.); +#309445 = EDGE_CURVE('',#309407,#309438,#309446,.T.); +#309446 = LINE('',#309447,#309448); +#309447 = CARTESIAN_POINT('',(138.671921,-75.8695,0.)); +#309448 = VECTOR('',#309449,1.); +#309449 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#309450 = PLANE('',#309451); +#309451 = AXIS2_PLACEMENT_3D('',#309452,#309453,#309454); +#309452 = CARTESIAN_POINT('',(138.671921,-75.8695,0.)); +#309453 = DIRECTION('',(-0.705543115226,0.708666996943,0.)); +#309454 = DIRECTION('',(-0.708666996943,-0.705543115226,0.)); +#309455 = ADVANCED_FACE('',(#309456),#309481,.F.); +#309456 = FACE_BOUND('',#309457,.F.); +#309457 = EDGE_LOOP('',(#309458,#309459,#309467,#309475)); +#309458 = ORIENTED_EDGE('',*,*,#309437,.T.); +#309459 = ORIENTED_EDGE('',*,*,#309460,.T.); +#309460 = EDGE_CURVE('',#309430,#309461,#309463,.T.); +#309461 = VERTEX_POINT('',#309462); +#309462 = CARTESIAN_POINT('',(138.019509,-76.498079,-3.5E-02)); +#309463 = LINE('',#309464,#309465); +#309464 = CARTESIAN_POINT('',(138.055557,-76.483147,-3.5E-02)); +#309465 = VECTOR('',#309466,1.); +#309466 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#309467 = ORIENTED_EDGE('',*,*,#309468,.F.); +#309468 = EDGE_CURVE('',#309469,#309461,#309471,.T.); +#309469 = VERTEX_POINT('',#309470); +#309470 = CARTESIAN_POINT('',(138.019509,-76.498079,0.)); +#309471 = LINE('',#309472,#309473); +#309472 = CARTESIAN_POINT('',(138.019509,-76.498079,0.)); +#309473 = VECTOR('',#309474,1.); +#309474 = DIRECTION('',(0.,0.,-1.)); +#309475 = ORIENTED_EDGE('',*,*,#309476,.F.); +#309476 = EDGE_CURVE('',#309438,#309469,#309477,.T.); +#309477 = LINE('',#309478,#309479); +#309478 = CARTESIAN_POINT('',(138.055557,-76.483147,0.)); +#309479 = VECTOR('',#309480,1.); +#309480 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#309481 = PLANE('',#309482); +#309482 = AXIS2_PLACEMENT_3D('',#309483,#309484,#309485); +#309483 = CARTESIAN_POINT('',(138.055557,-76.483147,0.)); +#309484 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#309485 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#309486 = ADVANCED_FACE('',(#309487),#309512,.F.); +#309487 = FACE_BOUND('',#309488,.F.); +#309488 = EDGE_LOOP('',(#309489,#309490,#309498,#309506)); +#309489 = ORIENTED_EDGE('',*,*,#309468,.T.); +#309490 = ORIENTED_EDGE('',*,*,#309491,.T.); +#309491 = EDGE_CURVE('',#309461,#309492,#309494,.T.); +#309492 = VERTEX_POINT('',#309493); +#309493 = CARTESIAN_POINT('',(137.380491,-76.498079,-3.5E-02)); +#309494 = LINE('',#309495,#309496); +#309495 = CARTESIAN_POINT('',(138.019509,-76.498079,-3.5E-02)); +#309496 = VECTOR('',#309497,1.); +#309497 = DIRECTION('',(-1.,0.,0.)); +#309498 = ORIENTED_EDGE('',*,*,#309499,.F.); +#309499 = EDGE_CURVE('',#309500,#309492,#309502,.T.); +#309500 = VERTEX_POINT('',#309501); +#309501 = CARTESIAN_POINT('',(137.380491,-76.498079,0.)); +#309502 = LINE('',#309503,#309504); +#309503 = CARTESIAN_POINT('',(137.380491,-76.498079,0.)); +#309504 = VECTOR('',#309505,1.); +#309505 = DIRECTION('',(0.,0.,-1.)); +#309506 = ORIENTED_EDGE('',*,*,#309507,.F.); +#309507 = EDGE_CURVE('',#309469,#309500,#309508,.T.); +#309508 = LINE('',#309509,#309510); +#309509 = CARTESIAN_POINT('',(138.019509,-76.498079,0.)); +#309510 = VECTOR('',#309511,1.); +#309511 = DIRECTION('',(-1.,0.,0.)); +#309512 = PLANE('',#309513); +#309513 = AXIS2_PLACEMENT_3D('',#309514,#309515,#309516); +#309514 = CARTESIAN_POINT('',(138.019509,-76.498079,0.)); +#309515 = DIRECTION('',(0.,1.,0.)); +#309516 = DIRECTION('',(-1.,0.,0.)); +#309517 = ADVANCED_FACE('',(#309518),#309545,.T.); +#309518 = FACE_BOUND('',#309519,.F.); +#309519 = EDGE_LOOP('',(#309520,#309521,#309530,#309538)); +#309520 = ORIENTED_EDGE('',*,*,#309499,.T.); +#309521 = ORIENTED_EDGE('',*,*,#309522,.T.); +#309522 = EDGE_CURVE('',#309492,#309523,#309525,.T.); +#309523 = VERTEX_POINT('',#309524); +#309524 = CARTESIAN_POINT('',(137.380491,-76.301921,-3.5E-02)); +#309525 = CIRCLE('',#309526,0.100000456609); +#309526 = AXIS2_PLACEMENT_3D('',#309527,#309528,#309529); +#309527 = CARTESIAN_POINT('',(137.4,-76.4,-3.5E-02)); +#309528 = DIRECTION('',(0.,0.,-1.)); +#309529 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#309530 = ORIENTED_EDGE('',*,*,#309531,.F.); +#309531 = EDGE_CURVE('',#309532,#309523,#309534,.T.); +#309532 = VERTEX_POINT('',#309533); +#309533 = CARTESIAN_POINT('',(137.380491,-76.301921,0.)); +#309534 = LINE('',#309535,#309536); +#309535 = CARTESIAN_POINT('',(137.380491,-76.301921,0.)); +#309536 = VECTOR('',#309537,1.); +#309537 = DIRECTION('',(0.,0.,-1.)); +#309538 = ORIENTED_EDGE('',*,*,#309539,.F.); +#309539 = EDGE_CURVE('',#309500,#309532,#309540,.T.); +#309540 = CIRCLE('',#309541,0.100000456609); +#309541 = AXIS2_PLACEMENT_3D('',#309542,#309543,#309544); +#309542 = CARTESIAN_POINT('',(137.4,-76.4,0.)); +#309543 = DIRECTION('',(0.,0.,-1.)); +#309544 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#309545 = CYLINDRICAL_SURFACE('',#309546,0.100000456609); +#309546 = AXIS2_PLACEMENT_3D('',#309547,#309548,#309549); +#309547 = CARTESIAN_POINT('',(137.4,-76.4,0.)); +#309548 = DIRECTION('',(-0.,-0.,1.)); +#309549 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#309550 = ADVANCED_FACE('',(#309551),#309576,.F.); +#309551 = FACE_BOUND('',#309552,.F.); +#309552 = EDGE_LOOP('',(#309553,#309554,#309562,#309570)); +#309553 = ORIENTED_EDGE('',*,*,#309531,.T.); +#309554 = ORIENTED_EDGE('',*,*,#309555,.T.); +#309555 = EDGE_CURVE('',#309523,#309556,#309558,.T.); +#309556 = VERTEX_POINT('',#309557); +#309557 = CARTESIAN_POINT('',(137.958578,-76.3,-3.5E-02)); +#309558 = LINE('',#309559,#309560); +#309559 = CARTESIAN_POINT('',(137.380491,-76.301921,-3.5E-02)); +#309560 = VECTOR('',#309561,1.); +#309561 = DIRECTION('',(0.999994478784,3.323010885455E-03,0.)); +#309562 = ORIENTED_EDGE('',*,*,#309563,.F.); +#309563 = EDGE_CURVE('',#309564,#309556,#309566,.T.); +#309564 = VERTEX_POINT('',#309565); +#309565 = CARTESIAN_POINT('',(137.958578,-76.3,0.)); +#309566 = LINE('',#309567,#309568); +#309567 = CARTESIAN_POINT('',(137.958578,-76.3,0.)); +#309568 = VECTOR('',#309569,1.); +#309569 = DIRECTION('',(0.,0.,-1.)); +#309570 = ORIENTED_EDGE('',*,*,#309571,.F.); +#309571 = EDGE_CURVE('',#309532,#309564,#309572,.T.); +#309572 = LINE('',#309573,#309574); +#309573 = CARTESIAN_POINT('',(137.380491,-76.301921,0.)); +#309574 = VECTOR('',#309575,1.); +#309575 = DIRECTION('',(0.999994478784,3.323010885455E-03,0.)); +#309576 = PLANE('',#309577); +#309577 = AXIS2_PLACEMENT_3D('',#309578,#309579,#309580); +#309578 = CARTESIAN_POINT('',(137.380491,-76.301921,0.)); +#309579 = DIRECTION('',(3.323010885455E-03,-0.999994478784,0.)); +#309580 = DIRECTION('',(0.999994478784,3.323010885455E-03,0.)); +#309581 = ADVANCED_FACE('',(#309582),#309607,.F.); +#309582 = FACE_BOUND('',#309583,.F.); +#309583 = EDGE_LOOP('',(#309584,#309585,#309593,#309601)); +#309584 = ORIENTED_EDGE('',*,*,#309563,.T.); +#309585 = ORIENTED_EDGE('',*,*,#309586,.T.); +#309586 = EDGE_CURVE('',#309556,#309587,#309589,.T.); +#309587 = VERTEX_POINT('',#309588); +#309588 = CARTESIAN_POINT('',(138.530499,-75.728078,-3.5E-02)); +#309589 = LINE('',#309590,#309591); +#309590 = CARTESIAN_POINT('',(137.958578,-76.3,-3.5E-02)); +#309591 = VECTOR('',#309592,1.); +#309592 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#309593 = ORIENTED_EDGE('',*,*,#309594,.F.); +#309594 = EDGE_CURVE('',#309595,#309587,#309597,.T.); +#309595 = VERTEX_POINT('',#309596); +#309596 = CARTESIAN_POINT('',(138.530499,-75.728078,0.)); +#309597 = LINE('',#309598,#309599); +#309598 = CARTESIAN_POINT('',(138.530499,-75.728078,0.)); +#309599 = VECTOR('',#309600,1.); +#309600 = DIRECTION('',(0.,0.,-1.)); +#309601 = ORIENTED_EDGE('',*,*,#309602,.F.); +#309602 = EDGE_CURVE('',#309564,#309595,#309603,.T.); +#309603 = LINE('',#309604,#309605); +#309604 = CARTESIAN_POINT('',(137.958578,-76.3,0.)); +#309605 = VECTOR('',#309606,1.); +#309606 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#309607 = PLANE('',#309608); +#309608 = AXIS2_PLACEMENT_3D('',#309609,#309610,#309611); +#309609 = CARTESIAN_POINT('',(137.958578,-76.3,0.)); +#309610 = DIRECTION('',(0.707107399371,-0.707106163001,0.)); +#309611 = DIRECTION('',(0.707106163001,0.707107399371,0.)); +#309612 = ADVANCED_FACE('',(#309613),#309638,.F.); +#309613 = FACE_BOUND('',#309614,.F.); +#309614 = EDGE_LOOP('',(#309615,#309616,#309624,#309632)); +#309615 = ORIENTED_EDGE('',*,*,#309594,.T.); +#309616 = ORIENTED_EDGE('',*,*,#309617,.T.); +#309617 = EDGE_CURVE('',#309587,#309618,#309620,.T.); +#309618 = VERTEX_POINT('',#309619); +#309619 = CARTESIAN_POINT('',(138.522836,-75.714805,-3.5E-02)); +#309620 = LINE('',#309621,#309622); +#309621 = CARTESIAN_POINT('',(138.530499,-75.728078,-3.5E-02)); +#309622 = VECTOR('',#309623,1.); +#309623 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#309624 = ORIENTED_EDGE('',*,*,#309625,.F.); +#309625 = EDGE_CURVE('',#309626,#309618,#309628,.T.); +#309626 = VERTEX_POINT('',#309627); +#309627 = CARTESIAN_POINT('',(138.522836,-75.714805,0.)); +#309628 = LINE('',#309629,#309630); +#309629 = CARTESIAN_POINT('',(138.522836,-75.714805,0.)); +#309630 = VECTOR('',#309631,1.); +#309631 = DIRECTION('',(0.,0.,-1.)); +#309632 = ORIENTED_EDGE('',*,*,#309633,.F.); +#309633 = EDGE_CURVE('',#309595,#309626,#309634,.T.); +#309634 = LINE('',#309635,#309636); +#309635 = CARTESIAN_POINT('',(138.530499,-75.728078,0.)); +#309636 = VECTOR('',#309637,1.); +#309637 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#309638 = PLANE('',#309639); +#309639 = AXIS2_PLACEMENT_3D('',#309640,#309641,#309642); +#309640 = CARTESIAN_POINT('',(138.530499,-75.728078,0.)); +#309641 = DIRECTION('',(0.866030210229,0.499991674902,0.)); +#309642 = DIRECTION('',(-0.499991674902,0.866030210229,0.)); +#309643 = ADVANCED_FACE('',(#309644),#309671,.T.); +#309644 = FACE_BOUND('',#309645,.F.); +#309645 = EDGE_LOOP('',(#309646,#309647,#309656,#309664)); +#309646 = ORIENTED_EDGE('',*,*,#309625,.T.); +#309647 = ORIENTED_EDGE('',*,*,#309648,.T.); +#309648 = EDGE_CURVE('',#309618,#309649,#309651,.T.); +#309649 = VERTEX_POINT('',#309650); +#309650 = CARTESIAN_POINT('',(138.914805,-75.877164,-3.5E-02)); +#309651 = CIRCLE('',#309652,0.300000118202); +#309652 = AXIS2_PLACEMENT_3D('',#309653,#309654,#309655); +#309653 = CARTESIAN_POINT('',(138.8,-75.6,-3.5E-02)); +#309654 = DIRECTION('',(0.,0.,-1.)); +#309655 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#309656 = ORIENTED_EDGE('',*,*,#309657,.F.); +#309657 = EDGE_CURVE('',#309658,#309649,#309660,.T.); +#309658 = VERTEX_POINT('',#309659); +#309659 = CARTESIAN_POINT('',(138.914805,-75.877164,0.)); +#309660 = LINE('',#309661,#309662); +#309661 = CARTESIAN_POINT('',(138.914805,-75.877164,0.)); +#309662 = VECTOR('',#309663,1.); +#309663 = DIRECTION('',(0.,0.,-1.)); +#309664 = ORIENTED_EDGE('',*,*,#309665,.F.); +#309665 = EDGE_CURVE('',#309626,#309658,#309666,.T.); +#309666 = CIRCLE('',#309667,0.300000118202); +#309667 = AXIS2_PLACEMENT_3D('',#309668,#309669,#309670); +#309668 = CARTESIAN_POINT('',(138.8,-75.6,0.)); +#309669 = DIRECTION('',(0.,0.,-1.)); +#309670 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#309671 = CYLINDRICAL_SURFACE('',#309672,0.300000118202); +#309672 = AXIS2_PLACEMENT_3D('',#309673,#309674,#309675); +#309673 = CARTESIAN_POINT('',(138.8,-75.6,0.)); +#309674 = DIRECTION('',(-0.,-0.,1.)); +#309675 = DIRECTION('',(-0.923879635986,-0.382683182554,-0.)); +#309676 = ADVANCED_FACE('',(#309677),#309693,.F.); +#309677 = FACE_BOUND('',#309678,.F.); +#309678 = EDGE_LOOP('',(#309679,#309680,#309686,#309687)); +#309679 = ORIENTED_EDGE('',*,*,#309657,.T.); +#309680 = ORIENTED_EDGE('',*,*,#309681,.T.); +#309681 = EDGE_CURVE('',#309649,#309044,#309682,.T.); +#309682 = LINE('',#309683,#309684); +#309683 = CARTESIAN_POINT('',(138.914805,-75.877164,-3.5E-02)); +#309684 = VECTOR('',#309685,1.); +#309685 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#309686 = ORIENTED_EDGE('',*,*,#309041,.F.); +#309687 = ORIENTED_EDGE('',*,*,#309688,.F.); +#309688 = EDGE_CURVE('',#309658,#309042,#309689,.T.); +#309689 = LINE('',#309690,#309691); +#309690 = CARTESIAN_POINT('',(138.914805,-75.877164,0.)); +#309691 = VECTOR('',#309692,1.); +#309692 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#309693 = PLANE('',#309694); +#309694 = AXIS2_PLACEMENT_3D('',#309695,#309696,#309697); +#309695 = CARTESIAN_POINT('',(138.914805,-75.877164,0.)); +#309696 = DIRECTION('',(-0.258758913865,0.9659419364,0.)); +#309697 = DIRECTION('',(-0.9659419364,-0.258758913865,0.)); +#309698 = ADVANCED_FACE('',(#309699),#309726,.F.); +#309699 = FACE_BOUND('',#309700,.F.); +#309700 = EDGE_LOOP('',(#309701,#309711,#309718,#309719)); +#309701 = ORIENTED_EDGE('',*,*,#309702,.T.); +#309702 = EDGE_CURVE('',#309703,#309705,#309707,.T.); +#309703 = VERTEX_POINT('',#309704); +#309704 = CARTESIAN_POINT('',(138.937255,-75.6,0.)); +#309705 = VERTEX_POINT('',#309706); +#309706 = CARTESIAN_POINT('',(138.937255,-75.6,-3.5E-02)); +#309707 = LINE('',#309708,#309709); +#309708 = CARTESIAN_POINT('',(138.937255,-75.6,0.)); +#309709 = VECTOR('',#309710,1.); +#309710 = DIRECTION('',(0.,0.,-1.)); +#309711 = ORIENTED_EDGE('',*,*,#309712,.T.); +#309712 = EDGE_CURVE('',#309705,#309705,#309713,.T.); +#309713 = CIRCLE('',#309714,0.137255); +#309714 = AXIS2_PLACEMENT_3D('',#309715,#309716,#309717); +#309715 = CARTESIAN_POINT('',(138.8,-75.6,-3.5E-02)); +#309716 = DIRECTION('',(0.,0.,1.)); +#309717 = DIRECTION('',(1.,0.,-0.)); +#309718 = ORIENTED_EDGE('',*,*,#309702,.F.); +#309719 = ORIENTED_EDGE('',*,*,#309720,.F.); +#309720 = EDGE_CURVE('',#309703,#309703,#309721,.T.); +#309721 = CIRCLE('',#309722,0.137255); +#309722 = AXIS2_PLACEMENT_3D('',#309723,#309724,#309725); +#309723 = CARTESIAN_POINT('',(138.8,-75.6,0.)); +#309724 = DIRECTION('',(0.,0.,1.)); +#309725 = DIRECTION('',(1.,0.,-0.)); +#309726 = CYLINDRICAL_SURFACE('',#309727,0.137255); +#309727 = AXIS2_PLACEMENT_3D('',#309728,#309729,#309730); +#309728 = CARTESIAN_POINT('',(138.8,-75.6,0.)); +#309729 = DIRECTION('',(0.,0.,1.)); +#309730 = DIRECTION('',(1.,0.,-0.)); +#309731 = ADVANCED_FACE('',(#309732,#309755),#309758,.F.); +#309732 = FACE_BOUND('',#309733,.F.); +#309733 = EDGE_LOOP('',(#309734,#309735,#309736,#309737,#309738,#309739, + #309740,#309741,#309742,#309743,#309744,#309745,#309746,#309747, + #309748,#309749,#309750,#309751,#309752,#309753,#309754)); +#309734 = ORIENTED_EDGE('',*,*,#309067,.T.); +#309735 = ORIENTED_EDGE('',*,*,#309098,.T.); +#309736 = ORIENTED_EDGE('',*,*,#309129,.T.); +#309737 = ORIENTED_EDGE('',*,*,#309161,.T.); +#309738 = ORIENTED_EDGE('',*,*,#309193,.T.); +#309739 = ORIENTED_EDGE('',*,*,#309225,.T.); +#309740 = ORIENTED_EDGE('',*,*,#309257,.T.); +#309741 = ORIENTED_EDGE('',*,*,#309288,.T.); +#309742 = ORIENTED_EDGE('',*,*,#309319,.T.); +#309743 = ORIENTED_EDGE('',*,*,#309351,.T.); +#309744 = ORIENTED_EDGE('',*,*,#309383,.T.); +#309745 = ORIENTED_EDGE('',*,*,#309414,.T.); +#309746 = ORIENTED_EDGE('',*,*,#309445,.T.); +#309747 = ORIENTED_EDGE('',*,*,#309476,.T.); +#309748 = ORIENTED_EDGE('',*,*,#309507,.T.); +#309749 = ORIENTED_EDGE('',*,*,#309539,.T.); +#309750 = ORIENTED_EDGE('',*,*,#309571,.T.); +#309751 = ORIENTED_EDGE('',*,*,#309602,.T.); +#309752 = ORIENTED_EDGE('',*,*,#309633,.T.); +#309753 = ORIENTED_EDGE('',*,*,#309665,.T.); +#309754 = ORIENTED_EDGE('',*,*,#309688,.T.); +#309755 = FACE_BOUND('',#309756,.F.); +#309756 = EDGE_LOOP('',(#309757)); +#309757 = ORIENTED_EDGE('',*,*,#309720,.T.); +#309758 = PLANE('',#309759); +#309759 = AXIS2_PLACEMENT_3D('',#309760,#309761,#309762); +#309760 = CARTESIAN_POINT('',(0.,0.,0.)); +#309761 = DIRECTION('',(-0.,-0.,-1.)); +#309762 = DIRECTION('',(-1.,0.,0.)); +#309763 = ADVANCED_FACE('',(#309764,#309787),#309790,.T.); +#309764 = FACE_BOUND('',#309765,.T.); +#309765 = EDGE_LOOP('',(#309766,#309767,#309768,#309769,#309770,#309771, + #309772,#309773,#309774,#309775,#309776,#309777,#309778,#309779, + #309780,#309781,#309782,#309783,#309784,#309785,#309786)); +#309766 = ORIENTED_EDGE('',*,*,#309051,.T.); +#309767 = ORIENTED_EDGE('',*,*,#309082,.T.); +#309768 = ORIENTED_EDGE('',*,*,#309113,.T.); +#309769 = ORIENTED_EDGE('',*,*,#309144,.T.); +#309770 = ORIENTED_EDGE('',*,*,#309177,.T.); +#309771 = ORIENTED_EDGE('',*,*,#309208,.T.); +#309772 = ORIENTED_EDGE('',*,*,#309241,.T.); +#309773 = ORIENTED_EDGE('',*,*,#309272,.T.); +#309774 = ORIENTED_EDGE('',*,*,#309303,.T.); +#309775 = ORIENTED_EDGE('',*,*,#309334,.T.); +#309776 = ORIENTED_EDGE('',*,*,#309367,.T.); +#309777 = ORIENTED_EDGE('',*,*,#309398,.T.); +#309778 = ORIENTED_EDGE('',*,*,#309429,.T.); +#309779 = ORIENTED_EDGE('',*,*,#309460,.T.); +#309780 = ORIENTED_EDGE('',*,*,#309491,.T.); +#309781 = ORIENTED_EDGE('',*,*,#309522,.T.); +#309782 = ORIENTED_EDGE('',*,*,#309555,.T.); +#309783 = ORIENTED_EDGE('',*,*,#309586,.T.); +#309784 = ORIENTED_EDGE('',*,*,#309617,.T.); +#309785 = ORIENTED_EDGE('',*,*,#309648,.T.); +#309786 = ORIENTED_EDGE('',*,*,#309681,.T.); +#309787 = FACE_BOUND('',#309788,.T.); +#309788 = EDGE_LOOP('',(#309789)); +#309789 = ORIENTED_EDGE('',*,*,#309712,.T.); +#309790 = PLANE('',#309791); +#309791 = AXIS2_PLACEMENT_3D('',#309792,#309793,#309794); +#309792 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#309793 = DIRECTION('',(-0.,-0.,-1.)); +#309794 = DIRECTION('',(-1.,0.,0.)); +#309795 = MANIFOLD_SOLID_BREP('',#309796); +#309796 = CLOSED_SHELL('',(#309797,#309837,#309868,#309899,#309930, + #309961,#309992,#310025,#310056,#310087,#310118,#310151,#310182, + #310213,#310246,#310268,#310301,#310327)); +#309797 = ADVANCED_FACE('',(#309798),#309832,.F.); +#309798 = FACE_BOUND('',#309799,.F.); +#309799 = EDGE_LOOP('',(#309800,#309810,#309818,#309826)); +#309800 = ORIENTED_EDGE('',*,*,#309801,.T.); +#309801 = EDGE_CURVE('',#309802,#309804,#309806,.T.); +#309802 = VERTEX_POINT('',#309803); +#309803 = CARTESIAN_POINT('',(139.583147,-71.819443,0.)); +#309804 = VERTEX_POINT('',#309805); +#309805 = CARTESIAN_POINT('',(139.583147,-71.819443,-3.5E-02)); +#309806 = LINE('',#309807,#309808); +#309807 = CARTESIAN_POINT('',(139.583147,-71.819443,0.)); +#309808 = VECTOR('',#309809,1.); +#309809 = DIRECTION('',(0.,0.,-1.)); +#309810 = ORIENTED_EDGE('',*,*,#309811,.T.); +#309811 = EDGE_CURVE('',#309804,#309812,#309814,.T.); +#309812 = VERTEX_POINT('',#309813); +#309813 = CARTESIAN_POINT('',(139.598079,-71.855491,-3.5E-02)); +#309814 = LINE('',#309815,#309816); +#309815 = CARTESIAN_POINT('',(139.583147,-71.819443,-3.5E-02)); +#309816 = VECTOR('',#309817,1.); +#309817 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#309818 = ORIENTED_EDGE('',*,*,#309819,.F.); +#309819 = EDGE_CURVE('',#309820,#309812,#309822,.T.); +#309820 = VERTEX_POINT('',#309821); +#309821 = CARTESIAN_POINT('',(139.598079,-71.855491,0.)); +#309822 = LINE('',#309823,#309824); +#309823 = CARTESIAN_POINT('',(139.598079,-71.855491,0.)); +#309824 = VECTOR('',#309825,1.); +#309825 = DIRECTION('',(0.,0.,-1.)); +#309826 = ORIENTED_EDGE('',*,*,#309827,.F.); +#309827 = EDGE_CURVE('',#309802,#309820,#309828,.T.); +#309828 = LINE('',#309829,#309830); +#309829 = CARTESIAN_POINT('',(139.583147,-71.819443,0.)); +#309830 = VECTOR('',#309831,1.); +#309831 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#309832 = PLANE('',#309833); +#309833 = AXIS2_PLACEMENT_3D('',#309834,#309835,#309836); +#309834 = CARTESIAN_POINT('',(139.583147,-71.819443,0.)); +#309835 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#309836 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#309837 = ADVANCED_FACE('',(#309838),#309863,.F.); +#309838 = FACE_BOUND('',#309839,.F.); +#309839 = EDGE_LOOP('',(#309840,#309841,#309849,#309857)); +#309840 = ORIENTED_EDGE('',*,*,#309819,.T.); +#309841 = ORIENTED_EDGE('',*,*,#309842,.T.); +#309842 = EDGE_CURVE('',#309812,#309843,#309845,.T.); +#309843 = VERTEX_POINT('',#309844); +#309844 = CARTESIAN_POINT('',(139.6,-72.278578,-3.5E-02)); +#309845 = LINE('',#309846,#309847); +#309846 = CARTESIAN_POINT('',(139.598079,-71.855491,-3.5E-02)); +#309847 = VECTOR('',#309848,1.); +#309848 = DIRECTION('',(4.540390508411E-03,-0.999989692374,0.)); +#309849 = ORIENTED_EDGE('',*,*,#309850,.F.); +#309850 = EDGE_CURVE('',#309851,#309843,#309853,.T.); +#309851 = VERTEX_POINT('',#309852); +#309852 = CARTESIAN_POINT('',(139.6,-72.278578,0.)); +#309853 = LINE('',#309854,#309855); +#309854 = CARTESIAN_POINT('',(139.6,-72.278578,0.)); +#309855 = VECTOR('',#309856,1.); +#309856 = DIRECTION('',(0.,0.,-1.)); +#309857 = ORIENTED_EDGE('',*,*,#309858,.F.); +#309858 = EDGE_CURVE('',#309820,#309851,#309859,.T.); +#309859 = LINE('',#309860,#309861); +#309860 = CARTESIAN_POINT('',(139.598079,-71.855491,0.)); +#309861 = VECTOR('',#309862,1.); +#309862 = DIRECTION('',(4.540390508411E-03,-0.999989692374,0.)); +#309863 = PLANE('',#309864); +#309864 = AXIS2_PLACEMENT_3D('',#309865,#309866,#309867); +#309865 = CARTESIAN_POINT('',(139.598079,-71.855491,0.)); +#309866 = DIRECTION('',(-0.999989692374,-4.540390508411E-03,-0.)); +#309867 = DIRECTION('',(4.540390508411E-03,-0.999989692374,0.)); +#309868 = ADVANCED_FACE('',(#309869),#309894,.F.); +#309869 = FACE_BOUND('',#309870,.F.); +#309870 = EDGE_LOOP('',(#309871,#309872,#309880,#309888)); +#309871 = ORIENTED_EDGE('',*,*,#309850,.T.); +#309872 = ORIENTED_EDGE('',*,*,#309873,.T.); +#309873 = EDGE_CURVE('',#309843,#309874,#309876,.T.); +#309874 = VERTEX_POINT('',#309875); +#309875 = CARTESIAN_POINT('',(140.164443,-71.716853,-3.5E-02)); +#309876 = LINE('',#309877,#309878); +#309877 = CARTESIAN_POINT('',(139.6,-72.278578,-3.5E-02)); +#309878 = VECTOR('',#309879,1.); +#309879 = DIRECTION('',(0.708811314948,0.705398128578,0.)); +#309880 = ORIENTED_EDGE('',*,*,#309881,.F.); +#309881 = EDGE_CURVE('',#309882,#309874,#309884,.T.); +#309882 = VERTEX_POINT('',#309883); +#309883 = CARTESIAN_POINT('',(140.164443,-71.716853,0.)); +#309884 = LINE('',#309885,#309886); +#309885 = CARTESIAN_POINT('',(140.164443,-71.716853,0.)); +#309886 = VECTOR('',#309887,1.); +#309887 = DIRECTION('',(0.,0.,-1.)); +#309888 = ORIENTED_EDGE('',*,*,#309889,.F.); +#309889 = EDGE_CURVE('',#309851,#309882,#309890,.T.); +#309890 = LINE('',#309891,#309892); +#309891 = CARTESIAN_POINT('',(139.6,-72.278578,0.)); +#309892 = VECTOR('',#309893,1.); +#309893 = DIRECTION('',(0.708811314948,0.705398128578,0.)); +#309894 = PLANE('',#309895); +#309895 = AXIS2_PLACEMENT_3D('',#309896,#309897,#309898); +#309896 = CARTESIAN_POINT('',(139.6,-72.278578,0.)); +#309897 = DIRECTION('',(0.705398128578,-0.708811314948,0.)); +#309898 = DIRECTION('',(0.708811314948,0.705398128578,0.)); +#309899 = ADVANCED_FACE('',(#309900),#309925,.F.); +#309900 = FACE_BOUND('',#309901,.F.); +#309901 = EDGE_LOOP('',(#309902,#309903,#309911,#309919)); +#309902 = ORIENTED_EDGE('',*,*,#309881,.T.); +#309903 = ORIENTED_EDGE('',*,*,#309904,.T.); +#309904 = EDGE_CURVE('',#309874,#309905,#309907,.T.); +#309905 = VERTEX_POINT('',#309906); +#309906 = CARTESIAN_POINT('',(140.200491,-71.701921,-3.5E-02)); +#309907 = LINE('',#309908,#309909); +#309908 = CARTESIAN_POINT('',(140.164443,-71.716853,-3.5E-02)); +#309909 = VECTOR('',#309910,1.); +#309910 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#309911 = ORIENTED_EDGE('',*,*,#309912,.F.); +#309912 = EDGE_CURVE('',#309913,#309905,#309915,.T.); +#309913 = VERTEX_POINT('',#309914); +#309914 = CARTESIAN_POINT('',(140.200491,-71.701921,0.)); +#309915 = LINE('',#309916,#309917); +#309916 = CARTESIAN_POINT('',(140.200491,-71.701921,0.)); +#309917 = VECTOR('',#309918,1.); +#309918 = DIRECTION('',(0.,0.,-1.)); +#309919 = ORIENTED_EDGE('',*,*,#309920,.F.); +#309920 = EDGE_CURVE('',#309882,#309913,#309921,.T.); +#309921 = LINE('',#309922,#309923); +#309922 = CARTESIAN_POINT('',(140.164443,-71.716853,0.)); +#309923 = VECTOR('',#309924,1.); +#309924 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#309925 = PLANE('',#309926); +#309926 = AXIS2_PLACEMENT_3D('',#309927,#309928,#309929); +#309927 = CARTESIAN_POINT('',(140.164443,-71.716853,0.)); +#309928 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#309929 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#309930 = ADVANCED_FACE('',(#309931),#309956,.F.); +#309931 = FACE_BOUND('',#309932,.F.); +#309932 = EDGE_LOOP('',(#309933,#309934,#309942,#309950)); +#309933 = ORIENTED_EDGE('',*,*,#309912,.T.); +#309934 = ORIENTED_EDGE('',*,*,#309935,.T.); +#309935 = EDGE_CURVE('',#309905,#309936,#309938,.T.); +#309936 = VERTEX_POINT('',#309937); +#309937 = CARTESIAN_POINT('',(140.418869,-71.7,-3.5E-02)); +#309938 = LINE('',#309939,#309940); +#309939 = CARTESIAN_POINT('',(140.200491,-71.701921,-3.5E-02)); +#309940 = VECTOR('',#309941,1.); +#309941 = DIRECTION('',(0.999961311512,8.796333327577E-03,0.)); +#309942 = ORIENTED_EDGE('',*,*,#309943,.F.); +#309943 = EDGE_CURVE('',#309944,#309936,#309946,.T.); +#309944 = VERTEX_POINT('',#309945); +#309945 = CARTESIAN_POINT('',(140.418869,-71.7,0.)); +#309946 = LINE('',#309947,#309948); +#309947 = CARTESIAN_POINT('',(140.418869,-71.7,0.)); +#309948 = VECTOR('',#309949,1.); +#309949 = DIRECTION('',(0.,0.,-1.)); +#309950 = ORIENTED_EDGE('',*,*,#309951,.F.); +#309951 = EDGE_CURVE('',#309913,#309944,#309952,.T.); +#309952 = LINE('',#309953,#309954); +#309953 = CARTESIAN_POINT('',(140.200491,-71.701921,0.)); +#309954 = VECTOR('',#309955,1.); +#309955 = DIRECTION('',(0.999961311512,8.796333327577E-03,0.)); +#309956 = PLANE('',#309957); +#309957 = AXIS2_PLACEMENT_3D('',#309958,#309959,#309960); +#309958 = CARTESIAN_POINT('',(140.200491,-71.701921,0.)); +#309959 = DIRECTION('',(8.796333327577E-03,-0.999961311512,0.)); +#309960 = DIRECTION('',(0.999961311512,8.796333327577E-03,0.)); +#309961 = ADVANCED_FACE('',(#309962),#309987,.F.); +#309962 = FACE_BOUND('',#309963,.F.); +#309963 = EDGE_LOOP('',(#309964,#309965,#309973,#309981)); +#309964 = ORIENTED_EDGE('',*,*,#309943,.T.); +#309965 = ORIENTED_EDGE('',*,*,#309966,.T.); +#309966 = EDGE_CURVE('',#309936,#309967,#309969,.T.); +#309967 = VERTEX_POINT('',#309968); +#309968 = CARTESIAN_POINT('',(140.422836,-71.685195,-3.5E-02)); +#309969 = LINE('',#309970,#309971); +#309970 = CARTESIAN_POINT('',(140.418869,-71.7,-3.5E-02)); +#309971 = VECTOR('',#309972,1.); +#309972 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#309973 = ORIENTED_EDGE('',*,*,#309974,.F.); +#309974 = EDGE_CURVE('',#309975,#309967,#309977,.T.); +#309975 = VERTEX_POINT('',#309976); +#309976 = CARTESIAN_POINT('',(140.422836,-71.685195,0.)); +#309977 = LINE('',#309978,#309979); +#309978 = CARTESIAN_POINT('',(140.422836,-71.685195,0.)); +#309979 = VECTOR('',#309980,1.); +#309980 = DIRECTION('',(0.,0.,-1.)); +#309981 = ORIENTED_EDGE('',*,*,#309982,.F.); +#309982 = EDGE_CURVE('',#309944,#309975,#309983,.T.); +#309983 = LINE('',#309984,#309985); +#309984 = CARTESIAN_POINT('',(140.418869,-71.7,0.)); +#309985 = VECTOR('',#309986,1.); +#309986 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#309987 = PLANE('',#309988); +#309988 = AXIS2_PLACEMENT_3D('',#309989,#309990,#309991); +#309989 = CARTESIAN_POINT('',(140.418869,-71.7,0.)); +#309990 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#309991 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#309992 = ADVANCED_FACE('',(#309993),#310020,.T.); +#309993 = FACE_BOUND('',#309994,.F.); +#309994 = EDGE_LOOP('',(#309995,#309996,#310005,#310013)); +#309995 = ORIENTED_EDGE('',*,*,#309974,.T.); +#309996 = ORIENTED_EDGE('',*,*,#309997,.T.); +#309997 = EDGE_CURVE('',#309967,#309998,#310000,.T.); +#309998 = VERTEX_POINT('',#309999); +#309999 = CARTESIAN_POINT('',(140.422836,-71.914805,-3.5E-02)); +#310000 = CIRCLE('',#310001,0.299999850918); +#310001 = AXIS2_PLACEMENT_3D('',#310002,#310003,#310004); +#310002 = CARTESIAN_POINT('',(140.69999971069,-71.8,-3.5E-02)); +#310003 = DIRECTION('',(0.,0.,-1.)); +#310004 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#310005 = ORIENTED_EDGE('',*,*,#310006,.F.); +#310006 = EDGE_CURVE('',#310007,#309998,#310009,.T.); +#310007 = VERTEX_POINT('',#310008); +#310008 = CARTESIAN_POINT('',(140.422836,-71.914805,0.)); +#310009 = LINE('',#310010,#310011); +#310010 = CARTESIAN_POINT('',(140.422836,-71.914805,0.)); +#310011 = VECTOR('',#310012,1.); +#310012 = DIRECTION('',(0.,0.,-1.)); +#310013 = ORIENTED_EDGE('',*,*,#310014,.F.); +#310014 = EDGE_CURVE('',#309975,#310007,#310015,.T.); +#310015 = CIRCLE('',#310016,0.299999850918); +#310016 = AXIS2_PLACEMENT_3D('',#310017,#310018,#310019); +#310017 = CARTESIAN_POINT('',(140.69999971069,-71.8,0.)); +#310018 = DIRECTION('',(0.,0.,-1.)); +#310019 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#310020 = CYLINDRICAL_SURFACE('',#310021,0.299999850918); +#310021 = AXIS2_PLACEMENT_3D('',#310022,#310023,#310024); +#310022 = CARTESIAN_POINT('',(140.69999971069,-71.8,0.)); +#310023 = DIRECTION('',(-0.,-0.,1.)); +#310024 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#310025 = ADVANCED_FACE('',(#310026),#310051,.F.); +#310026 = FACE_BOUND('',#310027,.F.); +#310027 = EDGE_LOOP('',(#310028,#310029,#310037,#310045)); +#310028 = ORIENTED_EDGE('',*,*,#310006,.T.); +#310029 = ORIENTED_EDGE('',*,*,#310030,.T.); +#310030 = EDGE_CURVE('',#309998,#310031,#310033,.T.); +#310031 = VERTEX_POINT('',#310032); +#310032 = CARTESIAN_POINT('',(140.418869,-71.9,-3.5E-02)); +#310033 = LINE('',#310034,#310035); +#310034 = CARTESIAN_POINT('',(140.422836,-71.914805,-3.5E-02)); +#310035 = VECTOR('',#310036,1.); +#310036 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#310037 = ORIENTED_EDGE('',*,*,#310038,.F.); +#310038 = EDGE_CURVE('',#310039,#310031,#310041,.T.); +#310039 = VERTEX_POINT('',#310040); +#310040 = CARTESIAN_POINT('',(140.418869,-71.9,0.)); +#310041 = LINE('',#310042,#310043); +#310042 = CARTESIAN_POINT('',(140.418869,-71.9,0.)); +#310043 = VECTOR('',#310044,1.); +#310044 = DIRECTION('',(0.,0.,-1.)); +#310045 = ORIENTED_EDGE('',*,*,#310046,.F.); +#310046 = EDGE_CURVE('',#310007,#310039,#310047,.T.); +#310047 = LINE('',#310048,#310049); +#310048 = CARTESIAN_POINT('',(140.422836,-71.914805,0.)); +#310049 = VECTOR('',#310050,1.); +#310050 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#310051 = PLANE('',#310052); +#310052 = AXIS2_PLACEMENT_3D('',#310053,#310054,#310055); +#310053 = CARTESIAN_POINT('',(140.422836,-71.914805,0.)); +#310054 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#310055 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#310056 = ADVANCED_FACE('',(#310057),#310082,.F.); +#310057 = FACE_BOUND('',#310058,.F.); +#310058 = EDGE_LOOP('',(#310059,#310060,#310068,#310076)); +#310059 = ORIENTED_EDGE('',*,*,#310038,.T.); +#310060 = ORIENTED_EDGE('',*,*,#310061,.T.); +#310061 = EDGE_CURVE('',#310031,#310062,#310064,.T.); +#310062 = VERTEX_POINT('',#310063); +#310063 = CARTESIAN_POINT('',(140.261422,-71.9,-3.5E-02)); +#310064 = LINE('',#310065,#310066); +#310065 = CARTESIAN_POINT('',(140.418869,-71.9,-3.5E-02)); +#310066 = VECTOR('',#310067,1.); +#310067 = DIRECTION('',(-1.,0.,0.)); +#310068 = ORIENTED_EDGE('',*,*,#310069,.F.); +#310069 = EDGE_CURVE('',#310070,#310062,#310072,.T.); +#310070 = VERTEX_POINT('',#310071); +#310071 = CARTESIAN_POINT('',(140.261422,-71.9,0.)); +#310072 = LINE('',#310073,#310074); +#310073 = CARTESIAN_POINT('',(140.261422,-71.9,0.)); +#310074 = VECTOR('',#310075,1.); +#310075 = DIRECTION('',(0.,0.,-1.)); +#310076 = ORIENTED_EDGE('',*,*,#310077,.F.); +#310077 = EDGE_CURVE('',#310039,#310070,#310078,.T.); +#310078 = LINE('',#310079,#310080); +#310079 = CARTESIAN_POINT('',(140.418869,-71.9,0.)); +#310080 = VECTOR('',#310081,1.); +#310081 = DIRECTION('',(-1.,0.,0.)); +#310082 = PLANE('',#310083); +#310083 = AXIS2_PLACEMENT_3D('',#310084,#310085,#310086); +#310084 = CARTESIAN_POINT('',(140.418869,-71.9,0.)); +#310085 = DIRECTION('',(0.,1.,0.)); +#310086 = DIRECTION('',(-1.,0.,0.)); +#310087 = ADVANCED_FACE('',(#310088),#310113,.F.); +#310088 = FACE_BOUND('',#310089,.F.); +#310089 = EDGE_LOOP('',(#310090,#310091,#310099,#310107)); +#310090 = ORIENTED_EDGE('',*,*,#310069,.T.); +#310091 = ORIENTED_EDGE('',*,*,#310092,.T.); +#310092 = EDGE_CURVE('',#310062,#310093,#310095,.T.); +#310093 = VERTEX_POINT('',#310094); +#310094 = CARTESIAN_POINT('',(139.555557,-72.603147,-3.5E-02)); +#310095 = LINE('',#310096,#310097); +#310096 = CARTESIAN_POINT('',(140.261422,-71.9,-3.5E-02)); +#310097 = VECTOR('',#310098,1.); +#310098 = DIRECTION('',(-0.708469479987,-0.70574145119,0.)); +#310099 = ORIENTED_EDGE('',*,*,#310100,.F.); +#310100 = EDGE_CURVE('',#310101,#310093,#310103,.T.); +#310101 = VERTEX_POINT('',#310102); +#310102 = CARTESIAN_POINT('',(139.555557,-72.603147,0.)); +#310103 = LINE('',#310104,#310105); +#310104 = CARTESIAN_POINT('',(139.555557,-72.603147,0.)); +#310105 = VECTOR('',#310106,1.); +#310106 = DIRECTION('',(0.,0.,-1.)); +#310107 = ORIENTED_EDGE('',*,*,#310108,.F.); +#310108 = EDGE_CURVE('',#310070,#310101,#310109,.T.); +#310109 = LINE('',#310110,#310111); +#310110 = CARTESIAN_POINT('',(140.261422,-71.9,0.)); +#310111 = VECTOR('',#310112,1.); +#310112 = DIRECTION('',(-0.708469479987,-0.70574145119,0.)); +#310113 = PLANE('',#310114); +#310114 = AXIS2_PLACEMENT_3D('',#310115,#310116,#310117); +#310115 = CARTESIAN_POINT('',(140.261422,-71.9,0.)); +#310116 = DIRECTION('',(-0.70574145119,0.708469479987,0.)); +#310117 = DIRECTION('',(-0.708469479987,-0.70574145119,0.)); +#310118 = ADVANCED_FACE('',(#310119),#310146,.T.); +#310119 = FACE_BOUND('',#310120,.F.); +#310120 = EDGE_LOOP('',(#310121,#310122,#310131,#310139)); +#310121 = ORIENTED_EDGE('',*,*,#310100,.T.); +#310122 = ORIENTED_EDGE('',*,*,#310123,.T.); +#310123 = EDGE_CURVE('',#310093,#310124,#310126,.T.); +#310124 = VERTEX_POINT('',#310125); +#310125 = CARTESIAN_POINT('',(139.401921,-72.539509,-3.5E-02)); +#310126 = CIRCLE('',#310127,9.999988522646E-02); +#310127 = AXIS2_PLACEMENT_3D('',#310128,#310129,#310130); +#310128 = CARTESIAN_POINT('',(139.49999951407,-72.52000048592,-3.5E-02) + ); +#310129 = DIRECTION('',(-0.,0.,-1.)); +#310130 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#310131 = ORIENTED_EDGE('',*,*,#310132,.F.); +#310132 = EDGE_CURVE('',#310133,#310124,#310135,.T.); +#310133 = VERTEX_POINT('',#310134); +#310134 = CARTESIAN_POINT('',(139.401921,-72.539509,0.)); +#310135 = LINE('',#310136,#310137); +#310136 = CARTESIAN_POINT('',(139.401921,-72.539509,0.)); +#310137 = VECTOR('',#310138,1.); +#310138 = DIRECTION('',(0.,0.,-1.)); +#310139 = ORIENTED_EDGE('',*,*,#310140,.F.); +#310140 = EDGE_CURVE('',#310101,#310133,#310141,.T.); +#310141 = CIRCLE('',#310142,9.999988522646E-02); +#310142 = AXIS2_PLACEMENT_3D('',#310143,#310144,#310145); +#310143 = CARTESIAN_POINT('',(139.49999951407,-72.52000048592,0.)); +#310144 = DIRECTION('',(-0.,0.,-1.)); +#310145 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#310146 = CYLINDRICAL_SURFACE('',#310147,9.999988522646E-02); +#310147 = AXIS2_PLACEMENT_3D('',#310148,#310149,#310150); +#310148 = CARTESIAN_POINT('',(139.49999951407,-72.52000048592,0.)); +#310149 = DIRECTION('',(0.,-0.,1.)); +#310150 = DIRECTION('',(0.555575496873,-0.831466095084,-0.)); +#310151 = ADVANCED_FACE('',(#310152),#310177,.F.); +#310152 = FACE_BOUND('',#310153,.F.); +#310153 = EDGE_LOOP('',(#310154,#310155,#310163,#310171)); +#310154 = ORIENTED_EDGE('',*,*,#310132,.T.); +#310155 = ORIENTED_EDGE('',*,*,#310156,.T.); +#310156 = EDGE_CURVE('',#310124,#310157,#310159,.T.); +#310157 = VERTEX_POINT('',#310158); +#310158 = CARTESIAN_POINT('',(139.4,-71.916422,-3.5E-02)); +#310159 = LINE('',#310160,#310161); +#310160 = CARTESIAN_POINT('',(139.401921,-72.539509,-3.5E-02)); +#310161 = VECTOR('',#310162,1.); +#310162 = DIRECTION('',(-3.083021906065E-03,0.999995247477,0.)); +#310163 = ORIENTED_EDGE('',*,*,#310164,.F.); +#310164 = EDGE_CURVE('',#310165,#310157,#310167,.T.); +#310165 = VERTEX_POINT('',#310166); +#310166 = CARTESIAN_POINT('',(139.4,-71.916422,0.)); +#310167 = LINE('',#310168,#310169); +#310168 = CARTESIAN_POINT('',(139.4,-71.916422,0.)); +#310169 = VECTOR('',#310170,1.); +#310170 = DIRECTION('',(0.,0.,-1.)); +#310171 = ORIENTED_EDGE('',*,*,#310172,.F.); +#310172 = EDGE_CURVE('',#310133,#310165,#310173,.T.); +#310173 = LINE('',#310174,#310175); +#310174 = CARTESIAN_POINT('',(139.401921,-72.539509,0.)); +#310175 = VECTOR('',#310176,1.); +#310176 = DIRECTION('',(-3.083021906065E-03,0.999995247477,0.)); +#310177 = PLANE('',#310178); +#310178 = AXIS2_PLACEMENT_3D('',#310179,#310180,#310181); +#310179 = CARTESIAN_POINT('',(139.401921,-72.539509,0.)); +#310180 = DIRECTION('',(0.999995247477,3.083021906065E-03,0.)); +#310181 = DIRECTION('',(-3.083021906065E-03,0.999995247477,0.)); +#310182 = ADVANCED_FACE('',(#310183),#310208,.F.); +#310183 = FACE_BOUND('',#310184,.F.); +#310184 = EDGE_LOOP('',(#310185,#310186,#310194,#310202)); +#310185 = ORIENTED_EDGE('',*,*,#310164,.T.); +#310186 = ORIENTED_EDGE('',*,*,#310187,.T.); +#310187 = EDGE_CURVE('',#310157,#310188,#310190,.T.); +#310188 = VERTEX_POINT('',#310189); +#310189 = CARTESIAN_POINT('',(138.691853,-71.205557,-3.5E-02)); +#310190 = LINE('',#310191,#310192); +#310191 = CARTESIAN_POINT('',(139.4,-71.916422,-3.5E-02)); +#310192 = VECTOR('',#310193,1.); +#310193 = DIRECTION('',(-0.705751082055,0.708459886076,0.)); +#310194 = ORIENTED_EDGE('',*,*,#310195,.F.); +#310195 = EDGE_CURVE('',#310196,#310188,#310198,.T.); +#310196 = VERTEX_POINT('',#310197); +#310197 = CARTESIAN_POINT('',(138.691853,-71.205557,0.)); +#310198 = LINE('',#310199,#310200); +#310199 = CARTESIAN_POINT('',(138.691853,-71.205557,0.)); +#310200 = VECTOR('',#310201,1.); +#310201 = DIRECTION('',(0.,0.,-1.)); +#310202 = ORIENTED_EDGE('',*,*,#310203,.F.); +#310203 = EDGE_CURVE('',#310165,#310196,#310204,.T.); +#310204 = LINE('',#310205,#310206); +#310205 = CARTESIAN_POINT('',(139.4,-71.916422,0.)); +#310206 = VECTOR('',#310207,1.); +#310207 = DIRECTION('',(-0.705751082055,0.708459886076,0.)); +#310208 = PLANE('',#310209); +#310209 = AXIS2_PLACEMENT_3D('',#310210,#310211,#310212); +#310210 = CARTESIAN_POINT('',(139.4,-71.916422,0.)); +#310211 = DIRECTION('',(0.708459886076,0.705751082055,0.)); +#310212 = DIRECTION('',(-0.705751082055,0.708459886076,0.)); +#310213 = ADVANCED_FACE('',(#310214),#310241,.T.); +#310214 = FACE_BOUND('',#310215,.F.); +#310215 = EDGE_LOOP('',(#310216,#310217,#310226,#310234)); +#310216 = ORIENTED_EDGE('',*,*,#310195,.T.); +#310217 = ORIENTED_EDGE('',*,*,#310218,.T.); +#310218 = EDGE_CURVE('',#310188,#310219,#310221,.T.); +#310219 = VERTEX_POINT('',#310220); +#310220 = CARTESIAN_POINT('',(138.830557,-71.066853,-3.5E-02)); +#310221 = CIRCLE('',#310222,9.999988522643E-02); +#310222 = AXIS2_PLACEMENT_3D('',#310223,#310224,#310225); +#310223 = CARTESIAN_POINT('',(138.77499951407,-71.14999951407,-3.5E-02) + ); +#310224 = DIRECTION('',(0.,0.,-1.)); +#310225 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#310226 = ORIENTED_EDGE('',*,*,#310227,.F.); +#310227 = EDGE_CURVE('',#310228,#310219,#310230,.T.); +#310228 = VERTEX_POINT('',#310229); +#310229 = CARTESIAN_POINT('',(138.830557,-71.066853,0.)); +#310230 = LINE('',#310231,#310232); +#310231 = CARTESIAN_POINT('',(138.830557,-71.066853,0.)); +#310232 = VECTOR('',#310233,1.); +#310233 = DIRECTION('',(0.,0.,-1.)); +#310234 = ORIENTED_EDGE('',*,*,#310235,.F.); +#310235 = EDGE_CURVE('',#310196,#310228,#310236,.T.); +#310236 = CIRCLE('',#310237,9.999988522643E-02); +#310237 = AXIS2_PLACEMENT_3D('',#310238,#310239,#310240); +#310238 = CARTESIAN_POINT('',(138.77499951407,-71.14999951407,0.)); +#310239 = DIRECTION('',(0.,0.,-1.)); +#310240 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#310241 = CYLINDRICAL_SURFACE('',#310242,9.999988522643E-02); +#310242 = AXIS2_PLACEMENT_3D('',#310243,#310244,#310245); +#310243 = CARTESIAN_POINT('',(138.77499951407,-71.14999951407,0.)); +#310244 = DIRECTION('',(-0.,-0.,1.)); +#310245 = DIRECTION('',(-0.831466095084,-0.555575496873,-0.)); +#310246 = ADVANCED_FACE('',(#310247),#310263,.F.); +#310247 = FACE_BOUND('',#310248,.F.); +#310248 = EDGE_LOOP('',(#310249,#310250,#310256,#310257)); +#310249 = ORIENTED_EDGE('',*,*,#310227,.T.); +#310250 = ORIENTED_EDGE('',*,*,#310251,.T.); +#310251 = EDGE_CURVE('',#310219,#309804,#310252,.T.); +#310252 = LINE('',#310253,#310254); +#310253 = CARTESIAN_POINT('',(138.830557,-71.066853,-3.5E-02)); +#310254 = VECTOR('',#310255,1.); +#310255 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310256 = ORIENTED_EDGE('',*,*,#309801,.F.); +#310257 = ORIENTED_EDGE('',*,*,#310258,.F.); +#310258 = EDGE_CURVE('',#310228,#309802,#310259,.T.); +#310259 = LINE('',#310260,#310261); +#310260 = CARTESIAN_POINT('',(138.830557,-71.066853,0.)); +#310261 = VECTOR('',#310262,1.); +#310262 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310263 = PLANE('',#310264); +#310264 = AXIS2_PLACEMENT_3D('',#310265,#310266,#310267); +#310265 = CARTESIAN_POINT('',(138.830557,-71.066853,0.)); +#310266 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#310267 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310268 = ADVANCED_FACE('',(#310269),#310296,.F.); +#310269 = FACE_BOUND('',#310270,.F.); +#310270 = EDGE_LOOP('',(#310271,#310281,#310288,#310289)); +#310271 = ORIENTED_EDGE('',*,*,#310272,.T.); +#310272 = EDGE_CURVE('',#310273,#310275,#310277,.T.); +#310273 = VERTEX_POINT('',#310274); +#310274 = CARTESIAN_POINT('',(140.837255,-71.8,0.)); +#310275 = VERTEX_POINT('',#310276); +#310276 = CARTESIAN_POINT('',(140.837255,-71.8,-3.5E-02)); +#310277 = LINE('',#310278,#310279); +#310278 = CARTESIAN_POINT('',(140.837255,-71.8,0.)); +#310279 = VECTOR('',#310280,1.); +#310280 = DIRECTION('',(0.,0.,-1.)); +#310281 = ORIENTED_EDGE('',*,*,#310282,.T.); +#310282 = EDGE_CURVE('',#310275,#310275,#310283,.T.); +#310283 = CIRCLE('',#310284,0.137255); +#310284 = AXIS2_PLACEMENT_3D('',#310285,#310286,#310287); +#310285 = CARTESIAN_POINT('',(140.7,-71.8,-3.5E-02)); +#310286 = DIRECTION('',(0.,0.,1.)); +#310287 = DIRECTION('',(1.,0.,-0.)); +#310288 = ORIENTED_EDGE('',*,*,#310272,.F.); +#310289 = ORIENTED_EDGE('',*,*,#310290,.F.); +#310290 = EDGE_CURVE('',#310273,#310273,#310291,.T.); +#310291 = CIRCLE('',#310292,0.137255); +#310292 = AXIS2_PLACEMENT_3D('',#310293,#310294,#310295); +#310293 = CARTESIAN_POINT('',(140.7,-71.8,0.)); +#310294 = DIRECTION('',(0.,0.,1.)); +#310295 = DIRECTION('',(1.,0.,-0.)); +#310296 = CYLINDRICAL_SURFACE('',#310297,0.137255); +#310297 = AXIS2_PLACEMENT_3D('',#310298,#310299,#310300); +#310298 = CARTESIAN_POINT('',(140.7,-71.8,0.)); +#310299 = DIRECTION('',(0.,0.,1.)); +#310300 = DIRECTION('',(1.,0.,-0.)); +#310301 = ADVANCED_FACE('',(#310302,#310319),#310322,.F.); +#310302 = FACE_BOUND('',#310303,.F.); +#310303 = EDGE_LOOP('',(#310304,#310305,#310306,#310307,#310308,#310309, + #310310,#310311,#310312,#310313,#310314,#310315,#310316,#310317, + #310318)); +#310304 = ORIENTED_EDGE('',*,*,#309827,.T.); +#310305 = ORIENTED_EDGE('',*,*,#309858,.T.); +#310306 = ORIENTED_EDGE('',*,*,#309889,.T.); +#310307 = ORIENTED_EDGE('',*,*,#309920,.T.); +#310308 = ORIENTED_EDGE('',*,*,#309951,.T.); +#310309 = ORIENTED_EDGE('',*,*,#309982,.T.); +#310310 = ORIENTED_EDGE('',*,*,#310014,.T.); +#310311 = ORIENTED_EDGE('',*,*,#310046,.T.); +#310312 = ORIENTED_EDGE('',*,*,#310077,.T.); +#310313 = ORIENTED_EDGE('',*,*,#310108,.T.); +#310314 = ORIENTED_EDGE('',*,*,#310140,.T.); +#310315 = ORIENTED_EDGE('',*,*,#310172,.T.); +#310316 = ORIENTED_EDGE('',*,*,#310203,.T.); +#310317 = ORIENTED_EDGE('',*,*,#310235,.T.); +#310318 = ORIENTED_EDGE('',*,*,#310258,.T.); +#310319 = FACE_BOUND('',#310320,.F.); +#310320 = EDGE_LOOP('',(#310321)); +#310321 = ORIENTED_EDGE('',*,*,#310290,.T.); +#310322 = PLANE('',#310323); +#310323 = AXIS2_PLACEMENT_3D('',#310324,#310325,#310326); +#310324 = CARTESIAN_POINT('',(0.,0.,0.)); +#310325 = DIRECTION('',(-0.,-0.,-1.)); +#310326 = DIRECTION('',(-1.,0.,0.)); +#310327 = ADVANCED_FACE('',(#310328,#310345),#310348,.T.); +#310328 = FACE_BOUND('',#310329,.T.); +#310329 = EDGE_LOOP('',(#310330,#310331,#310332,#310333,#310334,#310335, + #310336,#310337,#310338,#310339,#310340,#310341,#310342,#310343, + #310344)); +#310330 = ORIENTED_EDGE('',*,*,#309811,.T.); +#310331 = ORIENTED_EDGE('',*,*,#309842,.T.); +#310332 = ORIENTED_EDGE('',*,*,#309873,.T.); +#310333 = ORIENTED_EDGE('',*,*,#309904,.T.); +#310334 = ORIENTED_EDGE('',*,*,#309935,.T.); +#310335 = ORIENTED_EDGE('',*,*,#309966,.T.); +#310336 = ORIENTED_EDGE('',*,*,#309997,.T.); +#310337 = ORIENTED_EDGE('',*,*,#310030,.T.); +#310338 = ORIENTED_EDGE('',*,*,#310061,.T.); +#310339 = ORIENTED_EDGE('',*,*,#310092,.T.); +#310340 = ORIENTED_EDGE('',*,*,#310123,.T.); +#310341 = ORIENTED_EDGE('',*,*,#310156,.T.); +#310342 = ORIENTED_EDGE('',*,*,#310187,.T.); +#310343 = ORIENTED_EDGE('',*,*,#310218,.T.); +#310344 = ORIENTED_EDGE('',*,*,#310251,.T.); +#310345 = FACE_BOUND('',#310346,.T.); +#310346 = EDGE_LOOP('',(#310347)); +#310347 = ORIENTED_EDGE('',*,*,#310282,.T.); +#310348 = PLANE('',#310349); +#310349 = AXIS2_PLACEMENT_3D('',#310350,#310351,#310352); +#310350 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#310351 = DIRECTION('',(-0.,-0.,-1.)); +#310352 = DIRECTION('',(-1.,0.,0.)); +#310353 = MANIFOLD_SOLID_BREP('',#310354); +#310354 = CLOSED_SHELL('',(#310355,#310388,#310421,#310433)); +#310355 = ADVANCED_FACE('',(#310356),#310383,.T.); +#310356 = FACE_BOUND('',#310357,.T.); +#310357 = EDGE_LOOP('',(#310358,#310368,#310375,#310376)); +#310358 = ORIENTED_EDGE('',*,*,#310359,.T.); +#310359 = EDGE_CURVE('',#310360,#310362,#310364,.T.); +#310360 = VERTEX_POINT('',#310361); +#310361 = CARTESIAN_POINT('',(145.55,-65.1,0.)); +#310362 = VERTEX_POINT('',#310363); +#310363 = CARTESIAN_POINT('',(145.55,-65.1,-3.5E-02)); +#310364 = LINE('',#310365,#310366); +#310365 = CARTESIAN_POINT('',(145.55,-65.1,0.)); +#310366 = VECTOR('',#310367,1.); +#310367 = DIRECTION('',(0.,0.,-1.)); +#310368 = ORIENTED_EDGE('',*,*,#310369,.T.); +#310369 = EDGE_CURVE('',#310362,#310362,#310370,.T.); +#310370 = CIRCLE('',#310371,0.3); +#310371 = AXIS2_PLACEMENT_3D('',#310372,#310373,#310374); +#310372 = CARTESIAN_POINT('',(145.25,-65.1,-3.5E-02)); +#310373 = DIRECTION('',(0.,0.,1.)); +#310374 = DIRECTION('',(1.,0.,-0.)); +#310375 = ORIENTED_EDGE('',*,*,#310359,.F.); +#310376 = ORIENTED_EDGE('',*,*,#310377,.F.); +#310377 = EDGE_CURVE('',#310360,#310360,#310378,.T.); +#310378 = CIRCLE('',#310379,0.3); +#310379 = AXIS2_PLACEMENT_3D('',#310380,#310381,#310382); +#310380 = CARTESIAN_POINT('',(145.25,-65.1,0.)); +#310381 = DIRECTION('',(0.,0.,1.)); +#310382 = DIRECTION('',(1.,0.,-0.)); +#310383 = CYLINDRICAL_SURFACE('',#310384,0.3); +#310384 = AXIS2_PLACEMENT_3D('',#310385,#310386,#310387); +#310385 = CARTESIAN_POINT('',(145.25,-65.1,0.)); +#310386 = DIRECTION('',(0.,0.,1.)); +#310387 = DIRECTION('',(1.,0.,-0.)); +#310388 = ADVANCED_FACE('',(#310389),#310416,.F.); +#310389 = FACE_BOUND('',#310390,.F.); +#310390 = EDGE_LOOP('',(#310391,#310401,#310408,#310409)); +#310391 = ORIENTED_EDGE('',*,*,#310392,.T.); +#310392 = EDGE_CURVE('',#310393,#310395,#310397,.T.); +#310393 = VERTEX_POINT('',#310394); +#310394 = CARTESIAN_POINT('',(145.387255,-65.1,0.)); +#310395 = VERTEX_POINT('',#310396); +#310396 = CARTESIAN_POINT('',(145.387255,-65.1,-3.5E-02)); +#310397 = LINE('',#310398,#310399); +#310398 = CARTESIAN_POINT('',(145.387255,-65.1,0.)); +#310399 = VECTOR('',#310400,1.); +#310400 = DIRECTION('',(0.,0.,-1.)); +#310401 = ORIENTED_EDGE('',*,*,#310402,.T.); +#310402 = EDGE_CURVE('',#310395,#310395,#310403,.T.); +#310403 = CIRCLE('',#310404,0.137255); +#310404 = AXIS2_PLACEMENT_3D('',#310405,#310406,#310407); +#310405 = CARTESIAN_POINT('',(145.25,-65.1,-3.5E-02)); +#310406 = DIRECTION('',(0.,0.,1.)); +#310407 = DIRECTION('',(1.,0.,-0.)); +#310408 = ORIENTED_EDGE('',*,*,#310392,.F.); +#310409 = ORIENTED_EDGE('',*,*,#310410,.F.); +#310410 = EDGE_CURVE('',#310393,#310393,#310411,.T.); +#310411 = CIRCLE('',#310412,0.137255); +#310412 = AXIS2_PLACEMENT_3D('',#310413,#310414,#310415); +#310413 = CARTESIAN_POINT('',(145.25,-65.1,0.)); +#310414 = DIRECTION('',(0.,0.,1.)); +#310415 = DIRECTION('',(1.,0.,-0.)); +#310416 = CYLINDRICAL_SURFACE('',#310417,0.137255); +#310417 = AXIS2_PLACEMENT_3D('',#310418,#310419,#310420); +#310418 = CARTESIAN_POINT('',(145.25,-65.1,0.)); +#310419 = DIRECTION('',(0.,0.,1.)); +#310420 = DIRECTION('',(1.,0.,-0.)); +#310421 = ADVANCED_FACE('',(#310422,#310425),#310428,.F.); +#310422 = FACE_BOUND('',#310423,.T.); +#310423 = EDGE_LOOP('',(#310424)); +#310424 = ORIENTED_EDGE('',*,*,#310377,.T.); +#310425 = FACE_BOUND('',#310426,.F.); +#310426 = EDGE_LOOP('',(#310427)); +#310427 = ORIENTED_EDGE('',*,*,#310410,.T.); +#310428 = PLANE('',#310429); +#310429 = AXIS2_PLACEMENT_3D('',#310430,#310431,#310432); +#310430 = CARTESIAN_POINT('',(0.,0.,0.)); +#310431 = DIRECTION('',(-0.,-0.,-1.)); +#310432 = DIRECTION('',(-1.,0.,0.)); +#310433 = ADVANCED_FACE('',(#310434,#310437),#310440,.T.); +#310434 = FACE_BOUND('',#310435,.F.); +#310435 = EDGE_LOOP('',(#310436)); +#310436 = ORIENTED_EDGE('',*,*,#310369,.T.); +#310437 = FACE_BOUND('',#310438,.T.); +#310438 = EDGE_LOOP('',(#310439)); +#310439 = ORIENTED_EDGE('',*,*,#310402,.T.); +#310440 = PLANE('',#310441); +#310441 = AXIS2_PLACEMENT_3D('',#310442,#310443,#310444); +#310442 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#310443 = DIRECTION('',(-0.,-0.,-1.)); +#310444 = DIRECTION('',(-1.,0.,0.)); +#310445 = MANIFOLD_SOLID_BREP('',#310446); +#310446 = CLOSED_SHELL('',(#310447,#310480,#310513,#310525)); +#310447 = ADVANCED_FACE('',(#310448),#310475,.T.); +#310448 = FACE_BOUND('',#310449,.T.); +#310449 = EDGE_LOOP('',(#310450,#310460,#310467,#310468)); +#310450 = ORIENTED_EDGE('',*,*,#310451,.T.); +#310451 = EDGE_CURVE('',#310452,#310454,#310456,.T.); +#310452 = VERTEX_POINT('',#310453); +#310453 = CARTESIAN_POINT('',(131.1,-64.7,0.)); +#310454 = VERTEX_POINT('',#310455); +#310455 = CARTESIAN_POINT('',(131.1,-64.7,-3.5E-02)); +#310456 = LINE('',#310457,#310458); +#310457 = CARTESIAN_POINT('',(131.1,-64.7,0.)); +#310458 = VECTOR('',#310459,1.); +#310459 = DIRECTION('',(0.,0.,-1.)); +#310460 = ORIENTED_EDGE('',*,*,#310461,.T.); +#310461 = EDGE_CURVE('',#310454,#310454,#310462,.T.); +#310462 = CIRCLE('',#310463,0.3); +#310463 = AXIS2_PLACEMENT_3D('',#310464,#310465,#310466); +#310464 = CARTESIAN_POINT('',(130.8,-64.7,-3.5E-02)); +#310465 = DIRECTION('',(0.,0.,1.)); +#310466 = DIRECTION('',(1.,0.,-0.)); +#310467 = ORIENTED_EDGE('',*,*,#310451,.F.); +#310468 = ORIENTED_EDGE('',*,*,#310469,.F.); +#310469 = EDGE_CURVE('',#310452,#310452,#310470,.T.); +#310470 = CIRCLE('',#310471,0.3); +#310471 = AXIS2_PLACEMENT_3D('',#310472,#310473,#310474); +#310472 = CARTESIAN_POINT('',(130.8,-64.7,0.)); +#310473 = DIRECTION('',(0.,0.,1.)); +#310474 = DIRECTION('',(1.,0.,-0.)); +#310475 = CYLINDRICAL_SURFACE('',#310476,0.3); +#310476 = AXIS2_PLACEMENT_3D('',#310477,#310478,#310479); +#310477 = CARTESIAN_POINT('',(130.8,-64.7,0.)); +#310478 = DIRECTION('',(0.,0.,1.)); +#310479 = DIRECTION('',(1.,0.,-0.)); +#310480 = ADVANCED_FACE('',(#310481),#310508,.F.); +#310481 = FACE_BOUND('',#310482,.F.); +#310482 = EDGE_LOOP('',(#310483,#310493,#310500,#310501)); +#310483 = ORIENTED_EDGE('',*,*,#310484,.T.); +#310484 = EDGE_CURVE('',#310485,#310487,#310489,.T.); +#310485 = VERTEX_POINT('',#310486); +#310486 = CARTESIAN_POINT('',(130.937255,-64.7,0.)); +#310487 = VERTEX_POINT('',#310488); +#310488 = CARTESIAN_POINT('',(130.937255,-64.7,-3.5E-02)); +#310489 = LINE('',#310490,#310491); +#310490 = CARTESIAN_POINT('',(130.937255,-64.7,0.)); +#310491 = VECTOR('',#310492,1.); +#310492 = DIRECTION('',(0.,0.,-1.)); +#310493 = ORIENTED_EDGE('',*,*,#310494,.T.); +#310494 = EDGE_CURVE('',#310487,#310487,#310495,.T.); +#310495 = CIRCLE('',#310496,0.137255); +#310496 = AXIS2_PLACEMENT_3D('',#310497,#310498,#310499); +#310497 = CARTESIAN_POINT('',(130.8,-64.7,-3.5E-02)); +#310498 = DIRECTION('',(0.,0.,1.)); +#310499 = DIRECTION('',(1.,0.,-0.)); +#310500 = ORIENTED_EDGE('',*,*,#310484,.F.); +#310501 = ORIENTED_EDGE('',*,*,#310502,.F.); +#310502 = EDGE_CURVE('',#310485,#310485,#310503,.T.); +#310503 = CIRCLE('',#310504,0.137255); +#310504 = AXIS2_PLACEMENT_3D('',#310505,#310506,#310507); +#310505 = CARTESIAN_POINT('',(130.8,-64.7,0.)); +#310506 = DIRECTION('',(0.,0.,1.)); +#310507 = DIRECTION('',(1.,0.,-0.)); +#310508 = CYLINDRICAL_SURFACE('',#310509,0.137255); +#310509 = AXIS2_PLACEMENT_3D('',#310510,#310511,#310512); +#310510 = CARTESIAN_POINT('',(130.8,-64.7,0.)); +#310511 = DIRECTION('',(0.,0.,1.)); +#310512 = DIRECTION('',(1.,0.,-0.)); +#310513 = ADVANCED_FACE('',(#310514,#310517),#310520,.F.); +#310514 = FACE_BOUND('',#310515,.T.); +#310515 = EDGE_LOOP('',(#310516)); +#310516 = ORIENTED_EDGE('',*,*,#310469,.T.); +#310517 = FACE_BOUND('',#310518,.F.); +#310518 = EDGE_LOOP('',(#310519)); +#310519 = ORIENTED_EDGE('',*,*,#310502,.T.); +#310520 = PLANE('',#310521); +#310521 = AXIS2_PLACEMENT_3D('',#310522,#310523,#310524); +#310522 = CARTESIAN_POINT('',(0.,0.,0.)); +#310523 = DIRECTION('',(-0.,-0.,-1.)); +#310524 = DIRECTION('',(-1.,0.,0.)); +#310525 = ADVANCED_FACE('',(#310526,#310529),#310532,.T.); +#310526 = FACE_BOUND('',#310527,.F.); +#310527 = EDGE_LOOP('',(#310528)); +#310528 = ORIENTED_EDGE('',*,*,#310461,.T.); +#310529 = FACE_BOUND('',#310530,.T.); +#310530 = EDGE_LOOP('',(#310531)); +#310531 = ORIENTED_EDGE('',*,*,#310494,.T.); +#310532 = PLANE('',#310533); +#310533 = AXIS2_PLACEMENT_3D('',#310534,#310535,#310536); +#310534 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#310535 = DIRECTION('',(-0.,-0.,-1.)); +#310536 = DIRECTION('',(-1.,0.,0.)); +#310537 = MANIFOLD_SOLID_BREP('',#310538); +#310538 = CLOSED_SHELL('',(#310539,#310572,#310605,#310617)); +#310539 = ADVANCED_FACE('',(#310540),#310567,.T.); +#310540 = FACE_BOUND('',#310541,.T.); +#310541 = EDGE_LOOP('',(#310542,#310552,#310559,#310560)); +#310542 = ORIENTED_EDGE('',*,*,#310543,.T.); +#310543 = EDGE_CURVE('',#310544,#310546,#310548,.T.); +#310544 = VERTEX_POINT('',#310545); +#310545 = CARTESIAN_POINT('',(123.5,-64.5,0.)); +#310546 = VERTEX_POINT('',#310547); +#310547 = CARTESIAN_POINT('',(123.5,-64.5,-3.5E-02)); +#310548 = LINE('',#310549,#310550); +#310549 = CARTESIAN_POINT('',(123.5,-64.5,0.)); +#310550 = VECTOR('',#310551,1.); +#310551 = DIRECTION('',(0.,0.,-1.)); +#310552 = ORIENTED_EDGE('',*,*,#310553,.T.); +#310553 = EDGE_CURVE('',#310546,#310546,#310554,.T.); +#310554 = CIRCLE('',#310555,0.3); +#310555 = AXIS2_PLACEMENT_3D('',#310556,#310557,#310558); +#310556 = CARTESIAN_POINT('',(123.2,-64.5,-3.5E-02)); +#310557 = DIRECTION('',(0.,0.,1.)); +#310558 = DIRECTION('',(1.,0.,-0.)); +#310559 = ORIENTED_EDGE('',*,*,#310543,.F.); +#310560 = ORIENTED_EDGE('',*,*,#310561,.F.); +#310561 = EDGE_CURVE('',#310544,#310544,#310562,.T.); +#310562 = CIRCLE('',#310563,0.3); +#310563 = AXIS2_PLACEMENT_3D('',#310564,#310565,#310566); +#310564 = CARTESIAN_POINT('',(123.2,-64.5,0.)); +#310565 = DIRECTION('',(0.,0.,1.)); +#310566 = DIRECTION('',(1.,0.,-0.)); +#310567 = CYLINDRICAL_SURFACE('',#310568,0.3); +#310568 = AXIS2_PLACEMENT_3D('',#310569,#310570,#310571); +#310569 = CARTESIAN_POINT('',(123.2,-64.5,0.)); +#310570 = DIRECTION('',(0.,0.,1.)); +#310571 = DIRECTION('',(1.,0.,-0.)); +#310572 = ADVANCED_FACE('',(#310573),#310600,.F.); +#310573 = FACE_BOUND('',#310574,.F.); +#310574 = EDGE_LOOP('',(#310575,#310585,#310592,#310593)); +#310575 = ORIENTED_EDGE('',*,*,#310576,.T.); +#310576 = EDGE_CURVE('',#310577,#310579,#310581,.T.); +#310577 = VERTEX_POINT('',#310578); +#310578 = CARTESIAN_POINT('',(123.337255,-64.5,0.)); +#310579 = VERTEX_POINT('',#310580); +#310580 = CARTESIAN_POINT('',(123.337255,-64.5,-3.5E-02)); +#310581 = LINE('',#310582,#310583); +#310582 = CARTESIAN_POINT('',(123.337255,-64.5,0.)); +#310583 = VECTOR('',#310584,1.); +#310584 = DIRECTION('',(0.,0.,-1.)); +#310585 = ORIENTED_EDGE('',*,*,#310586,.T.); +#310586 = EDGE_CURVE('',#310579,#310579,#310587,.T.); +#310587 = CIRCLE('',#310588,0.137255); +#310588 = AXIS2_PLACEMENT_3D('',#310589,#310590,#310591); +#310589 = CARTESIAN_POINT('',(123.2,-64.5,-3.5E-02)); +#310590 = DIRECTION('',(0.,0.,1.)); +#310591 = DIRECTION('',(1.,0.,-0.)); +#310592 = ORIENTED_EDGE('',*,*,#310576,.F.); +#310593 = ORIENTED_EDGE('',*,*,#310594,.F.); +#310594 = EDGE_CURVE('',#310577,#310577,#310595,.T.); +#310595 = CIRCLE('',#310596,0.137255); +#310596 = AXIS2_PLACEMENT_3D('',#310597,#310598,#310599); +#310597 = CARTESIAN_POINT('',(123.2,-64.5,0.)); +#310598 = DIRECTION('',(0.,0.,1.)); +#310599 = DIRECTION('',(1.,0.,-0.)); +#310600 = CYLINDRICAL_SURFACE('',#310601,0.137255); +#310601 = AXIS2_PLACEMENT_3D('',#310602,#310603,#310604); +#310602 = CARTESIAN_POINT('',(123.2,-64.5,0.)); +#310603 = DIRECTION('',(0.,0.,1.)); +#310604 = DIRECTION('',(1.,0.,-0.)); +#310605 = ADVANCED_FACE('',(#310606,#310609),#310612,.F.); +#310606 = FACE_BOUND('',#310607,.T.); +#310607 = EDGE_LOOP('',(#310608)); +#310608 = ORIENTED_EDGE('',*,*,#310561,.T.); +#310609 = FACE_BOUND('',#310610,.F.); +#310610 = EDGE_LOOP('',(#310611)); +#310611 = ORIENTED_EDGE('',*,*,#310594,.T.); +#310612 = PLANE('',#310613); +#310613 = AXIS2_PLACEMENT_3D('',#310614,#310615,#310616); +#310614 = CARTESIAN_POINT('',(0.,0.,0.)); +#310615 = DIRECTION('',(-0.,-0.,-1.)); +#310616 = DIRECTION('',(-1.,0.,0.)); +#310617 = ADVANCED_FACE('',(#310618,#310621),#310624,.T.); +#310618 = FACE_BOUND('',#310619,.F.); +#310619 = EDGE_LOOP('',(#310620)); +#310620 = ORIENTED_EDGE('',*,*,#310553,.T.); +#310621 = FACE_BOUND('',#310622,.T.); +#310622 = EDGE_LOOP('',(#310623)); +#310623 = ORIENTED_EDGE('',*,*,#310586,.T.); +#310624 = PLANE('',#310625); +#310625 = AXIS2_PLACEMENT_3D('',#310626,#310627,#310628); +#310626 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#310627 = DIRECTION('',(-0.,-0.,-1.)); +#310628 = DIRECTION('',(-1.,0.,0.)); +#310629 = MANIFOLD_SOLID_BREP('',#310630); +#310630 = CLOSED_SHELL('',(#310631,#310673,#310704,#310735,#310766, + #310797,#310828,#310859,#310892,#310923,#310954,#310985,#311018, + #311049,#311082,#311113,#311144,#311175,#311208,#311239,#311272, + #311303,#311334,#311365,#311398,#311429,#311462,#311493,#311524, + #311555,#311588,#311619,#311652,#311683,#311714,#311747,#311778, + #311809,#311840,#311873,#311904,#311937,#311968,#311999,#312030, + #312063,#312094,#312127,#312158,#312191,#312222,#312255,#312286, + #312317,#312348,#312381,#312412,#312443,#312476,#312507,#312538, + #312569,#312600,#312631,#312662,#312693,#312724,#312757,#312788, + #312821,#312852,#312883,#312914,#312947,#312978,#313011,#313042, + #313073,#313106,#313137,#313168,#313199,#313232,#313263,#313296, + #313327,#313358,#313389,#313422,#313453,#313486,#313517,#313548, + #313579,#313612,#313643,#313676,#313707,#313738,#313769,#313802, + #313833,#313866,#313897,#313928,#313959,#313990,#314021,#314052, + #314074,#314191)); +#310631 = ADVANCED_FACE('',(#310632),#310668,.F.); +#310632 = FACE_BOUND('',#310633,.F.); +#310633 = EDGE_LOOP('',(#310634,#310644,#310653,#310661)); +#310634 = ORIENTED_EDGE('',*,*,#310635,.T.); +#310635 = EDGE_CURVE('',#310636,#310638,#310640,.T.); +#310636 = VERTEX_POINT('',#310637); +#310637 = CARTESIAN_POINT('',(152.27939,-77.787506,0.)); +#310638 = VERTEX_POINT('',#310639); +#310639 = CARTESIAN_POINT('',(152.27939,-77.787506,-3.5E-02)); +#310640 = LINE('',#310641,#310642); +#310641 = CARTESIAN_POINT('',(152.27939,-77.787506,0.)); +#310642 = VECTOR('',#310643,1.); +#310643 = DIRECTION('',(0.,0.,-1.)); +#310644 = ORIENTED_EDGE('',*,*,#310645,.T.); +#310645 = EDGE_CURVE('',#310638,#310646,#310648,.T.); +#310646 = VERTEX_POINT('',#310647); +#310647 = CARTESIAN_POINT('',(152.720609,-77.787506,-3.5E-02)); +#310648 = CIRCLE('',#310649,0.362083333861); +#310649 = AXIS2_PLACEMENT_3D('',#310650,#310651,#310652); +#310650 = CARTESIAN_POINT('',(152.4999995,-77.50038966614,-3.5E-02)); +#310651 = DIRECTION('',(0.,0.,1.)); +#310652 = DIRECTION('',(-0.609278249976,-0.792956502027,0.)); +#310653 = ORIENTED_EDGE('',*,*,#310654,.F.); +#310654 = EDGE_CURVE('',#310655,#310646,#310657,.T.); +#310655 = VERTEX_POINT('',#310656); +#310656 = CARTESIAN_POINT('',(152.720609,-77.787506,0.)); +#310657 = LINE('',#310658,#310659); +#310658 = CARTESIAN_POINT('',(152.720609,-77.787506,0.)); +#310659 = VECTOR('',#310660,1.); +#310660 = DIRECTION('',(0.,0.,-1.)); +#310661 = ORIENTED_EDGE('',*,*,#310662,.F.); +#310662 = EDGE_CURVE('',#310636,#310655,#310663,.T.); +#310663 = CIRCLE('',#310664,0.362083333861); +#310664 = AXIS2_PLACEMENT_3D('',#310665,#310666,#310667); +#310665 = CARTESIAN_POINT('',(152.4999995,-77.50038966614,0.)); +#310666 = DIRECTION('',(0.,0.,1.)); +#310667 = DIRECTION('',(-0.609278249976,-0.792956502027,0.)); +#310668 = CYLINDRICAL_SURFACE('',#310669,0.362083333861); +#310669 = AXIS2_PLACEMENT_3D('',#310670,#310671,#310672); +#310670 = CARTESIAN_POINT('',(152.4999995,-77.50038966614,0.)); +#310671 = DIRECTION('',(0.,0.,1.)); +#310672 = DIRECTION('',(-0.609278249976,-0.792956502027,0.)); +#310673 = ADVANCED_FACE('',(#310674),#310699,.F.); +#310674 = FACE_BOUND('',#310675,.F.); +#310675 = EDGE_LOOP('',(#310676,#310677,#310685,#310693)); +#310676 = ORIENTED_EDGE('',*,*,#310654,.T.); +#310677 = ORIENTED_EDGE('',*,*,#310678,.T.); +#310678 = EDGE_CURVE('',#310646,#310679,#310681,.T.); +#310679 = VERTEX_POINT('',#310680); +#310680 = CARTESIAN_POINT('',(152.775,-77.733115,-3.5E-02)); +#310681 = LINE('',#310682,#310683); +#310682 = CARTESIAN_POINT('',(152.720609,-77.787506,-3.5E-02)); +#310683 = VECTOR('',#310684,1.); +#310684 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#310685 = ORIENTED_EDGE('',*,*,#310686,.F.); +#310686 = EDGE_CURVE('',#310687,#310679,#310689,.T.); +#310687 = VERTEX_POINT('',#310688); +#310688 = CARTESIAN_POINT('',(152.775,-77.733115,0.)); +#310689 = LINE('',#310690,#310691); +#310690 = CARTESIAN_POINT('',(152.775,-77.733115,0.)); +#310691 = VECTOR('',#310692,1.); +#310692 = DIRECTION('',(0.,0.,-1.)); +#310693 = ORIENTED_EDGE('',*,*,#310694,.F.); +#310694 = EDGE_CURVE('',#310655,#310687,#310695,.T.); +#310695 = LINE('',#310696,#310697); +#310696 = CARTESIAN_POINT('',(152.720609,-77.787506,0.)); +#310697 = VECTOR('',#310698,1.); +#310698 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#310699 = PLANE('',#310700); +#310700 = AXIS2_PLACEMENT_3D('',#310701,#310702,#310703); +#310701 = CARTESIAN_POINT('',(152.720609,-77.787506,0.)); +#310702 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#310703 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#310704 = ADVANCED_FACE('',(#310705),#310730,.F.); +#310705 = FACE_BOUND('',#310706,.F.); +#310706 = EDGE_LOOP('',(#310707,#310708,#310716,#310724)); +#310707 = ORIENTED_EDGE('',*,*,#310686,.T.); +#310708 = ORIENTED_EDGE('',*,*,#310709,.T.); +#310709 = EDGE_CURVE('',#310679,#310710,#310712,.T.); +#310710 = VERTEX_POINT('',#310711); +#310711 = CARTESIAN_POINT('',(152.775,-81.808984,-3.5E-02)); +#310712 = LINE('',#310713,#310714); +#310713 = CARTESIAN_POINT('',(152.775,-77.733115,-3.5E-02)); +#310714 = VECTOR('',#310715,1.); +#310715 = DIRECTION('',(0.,-1.,0.)); +#310716 = ORIENTED_EDGE('',*,*,#310717,.F.); +#310717 = EDGE_CURVE('',#310718,#310710,#310720,.T.); +#310718 = VERTEX_POINT('',#310719); +#310719 = CARTESIAN_POINT('',(152.775,-81.808984,0.)); +#310720 = LINE('',#310721,#310722); +#310721 = CARTESIAN_POINT('',(152.775,-81.808984,0.)); +#310722 = VECTOR('',#310723,1.); +#310723 = DIRECTION('',(0.,0.,-1.)); +#310724 = ORIENTED_EDGE('',*,*,#310725,.F.); +#310725 = EDGE_CURVE('',#310687,#310718,#310726,.T.); +#310726 = LINE('',#310727,#310728); +#310727 = CARTESIAN_POINT('',(152.775,-77.733115,0.)); +#310728 = VECTOR('',#310729,1.); +#310729 = DIRECTION('',(0.,-1.,0.)); +#310730 = PLANE('',#310731); +#310731 = AXIS2_PLACEMENT_3D('',#310732,#310733,#310734); +#310732 = CARTESIAN_POINT('',(152.775,-77.733115,0.)); +#310733 = DIRECTION('',(-1.,-0.,-0.)); +#310734 = DIRECTION('',(0.,-1.,0.)); +#310735 = ADVANCED_FACE('',(#310736),#310761,.F.); +#310736 = FACE_BOUND('',#310737,.F.); +#310737 = EDGE_LOOP('',(#310738,#310739,#310747,#310755)); +#310738 = ORIENTED_EDGE('',*,*,#310717,.T.); +#310739 = ORIENTED_EDGE('',*,*,#310740,.T.); +#310740 = EDGE_CURVE('',#310710,#310741,#310743,.T.); +#310741 = VERTEX_POINT('',#310742); +#310742 = CARTESIAN_POINT('',(152.769716,-81.862634,-3.5E-02)); +#310743 = LINE('',#310744,#310745); +#310744 = CARTESIAN_POINT('',(152.775,-81.808984,-3.5E-02)); +#310745 = VECTOR('',#310746,1.); +#310746 = DIRECTION('',(-9.801596841836E-02,-0.995184842095,0.)); +#310747 = ORIENTED_EDGE('',*,*,#310748,.F.); +#310748 = EDGE_CURVE('',#310749,#310741,#310751,.T.); +#310749 = VERTEX_POINT('',#310750); +#310750 = CARTESIAN_POINT('',(152.769716,-81.862634,0.)); +#310751 = LINE('',#310752,#310753); +#310752 = CARTESIAN_POINT('',(152.769716,-81.862634,0.)); +#310753 = VECTOR('',#310754,1.); +#310754 = DIRECTION('',(0.,0.,-1.)); +#310755 = ORIENTED_EDGE('',*,*,#310756,.F.); +#310756 = EDGE_CURVE('',#310718,#310749,#310757,.T.); +#310757 = LINE('',#310758,#310759); +#310758 = CARTESIAN_POINT('',(152.775,-81.808984,0.)); +#310759 = VECTOR('',#310760,1.); +#310760 = DIRECTION('',(-9.801596841836E-02,-0.995184842095,0.)); +#310761 = PLANE('',#310762); +#310762 = AXIS2_PLACEMENT_3D('',#310763,#310764,#310765); +#310763 = CARTESIAN_POINT('',(152.775,-81.808984,0.)); +#310764 = DIRECTION('',(-0.995184842095,9.801596841836E-02,0.)); +#310765 = DIRECTION('',(-9.801596841836E-02,-0.995184842095,0.)); +#310766 = ADVANCED_FACE('',(#310767),#310792,.F.); +#310767 = FACE_BOUND('',#310768,.F.); +#310768 = EDGE_LOOP('',(#310769,#310770,#310778,#310786)); +#310769 = ORIENTED_EDGE('',*,*,#310748,.T.); +#310770 = ORIENTED_EDGE('',*,*,#310771,.T.); +#310771 = EDGE_CURVE('',#310741,#310772,#310774,.T.); +#310772 = VERTEX_POINT('',#310773); +#310773 = CARTESIAN_POINT('',(152.728654,-81.961766,-3.5E-02)); +#310774 = LINE('',#310775,#310776); +#310775 = CARTESIAN_POINT('',(152.769716,-81.862634,-3.5E-02)); +#310776 = VECTOR('',#310777,1.); +#310777 = DIRECTION('',(-0.382684873265,-0.92387893567,0.)); +#310778 = ORIENTED_EDGE('',*,*,#310779,.F.); +#310779 = EDGE_CURVE('',#310780,#310772,#310782,.T.); +#310780 = VERTEX_POINT('',#310781); +#310781 = CARTESIAN_POINT('',(152.728654,-81.961766,0.)); +#310782 = LINE('',#310783,#310784); +#310783 = CARTESIAN_POINT('',(152.728654,-81.961766,0.)); +#310784 = VECTOR('',#310785,1.); +#310785 = DIRECTION('',(0.,0.,-1.)); +#310786 = ORIENTED_EDGE('',*,*,#310787,.F.); +#310787 = EDGE_CURVE('',#310749,#310780,#310788,.T.); +#310788 = LINE('',#310789,#310790); +#310789 = CARTESIAN_POINT('',(152.769716,-81.862634,0.)); +#310790 = VECTOR('',#310791,1.); +#310791 = DIRECTION('',(-0.382684873265,-0.92387893567,0.)); +#310792 = PLANE('',#310793); +#310793 = AXIS2_PLACEMENT_3D('',#310794,#310795,#310796); +#310794 = CARTESIAN_POINT('',(152.769716,-81.862634,0.)); +#310795 = DIRECTION('',(-0.92387893567,0.382684873265,0.)); +#310796 = DIRECTION('',(-0.382684873265,-0.92387893567,0.)); +#310797 = ADVANCED_FACE('',(#310798),#310823,.F.); +#310798 = FACE_BOUND('',#310799,.F.); +#310799 = EDGE_LOOP('',(#310800,#310801,#310809,#310817)); +#310800 = ORIENTED_EDGE('',*,*,#310779,.T.); +#310801 = ORIENTED_EDGE('',*,*,#310802,.T.); +#310802 = EDGE_CURVE('',#310772,#310803,#310805,.T.); +#310803 = VERTEX_POINT('',#310804); +#310804 = CARTESIAN_POINT('',(152.675,-82.022892,-3.5E-02)); +#310805 = LINE('',#310806,#310807); +#310806 = CARTESIAN_POINT('',(152.728654,-81.961766,-3.5E-02)); +#310807 = VECTOR('',#310808,1.); +#310808 = DIRECTION('',(-0.65967890777,-0.751547562462,0.)); +#310809 = ORIENTED_EDGE('',*,*,#310810,.F.); +#310810 = EDGE_CURVE('',#310811,#310803,#310813,.T.); +#310811 = VERTEX_POINT('',#310812); +#310812 = CARTESIAN_POINT('',(152.675,-82.022892,0.)); +#310813 = LINE('',#310814,#310815); +#310814 = CARTESIAN_POINT('',(152.675,-82.022892,0.)); +#310815 = VECTOR('',#310816,1.); +#310816 = DIRECTION('',(0.,0.,-1.)); +#310817 = ORIENTED_EDGE('',*,*,#310818,.F.); +#310818 = EDGE_CURVE('',#310780,#310811,#310819,.T.); +#310819 = LINE('',#310820,#310821); +#310820 = CARTESIAN_POINT('',(152.728654,-81.961766,0.)); +#310821 = VECTOR('',#310822,1.); +#310822 = DIRECTION('',(-0.65967890777,-0.751547562462,0.)); +#310823 = PLANE('',#310824); +#310824 = AXIS2_PLACEMENT_3D('',#310825,#310826,#310827); +#310825 = CARTESIAN_POINT('',(152.728654,-81.961766,0.)); +#310826 = DIRECTION('',(-0.751547562462,0.65967890777,0.)); +#310827 = DIRECTION('',(-0.65967890777,-0.751547562462,0.)); +#310828 = ADVANCED_FACE('',(#310829),#310854,.F.); +#310829 = FACE_BOUND('',#310830,.F.); +#310830 = EDGE_LOOP('',(#310831,#310832,#310840,#310848)); +#310831 = ORIENTED_EDGE('',*,*,#310810,.T.); +#310832 = ORIENTED_EDGE('',*,*,#310833,.T.); +#310833 = EDGE_CURVE('',#310803,#310834,#310836,.T.); +#310834 = VERTEX_POINT('',#310835); +#310835 = CARTESIAN_POINT('',(152.675,-87.796142,-3.5E-02)); +#310836 = LINE('',#310837,#310838); +#310837 = CARTESIAN_POINT('',(152.675,-82.022892,-3.5E-02)); +#310838 = VECTOR('',#310839,1.); +#310839 = DIRECTION('',(0.,-1.,0.)); +#310840 = ORIENTED_EDGE('',*,*,#310841,.F.); +#310841 = EDGE_CURVE('',#310842,#310834,#310844,.T.); +#310842 = VERTEX_POINT('',#310843); +#310843 = CARTESIAN_POINT('',(152.675,-87.796142,0.)); +#310844 = LINE('',#310845,#310846); +#310845 = CARTESIAN_POINT('',(152.675,-87.796142,0.)); +#310846 = VECTOR('',#310847,1.); +#310847 = DIRECTION('',(0.,0.,-1.)); +#310848 = ORIENTED_EDGE('',*,*,#310849,.F.); +#310849 = EDGE_CURVE('',#310811,#310842,#310850,.T.); +#310850 = LINE('',#310851,#310852); +#310851 = CARTESIAN_POINT('',(152.675,-82.022892,0.)); +#310852 = VECTOR('',#310853,1.); +#310853 = DIRECTION('',(0.,-1.,0.)); +#310854 = PLANE('',#310855); +#310855 = AXIS2_PLACEMENT_3D('',#310856,#310857,#310858); +#310856 = CARTESIAN_POINT('',(152.675,-82.022892,0.)); +#310857 = DIRECTION('',(-1.,-0.,-0.)); +#310858 = DIRECTION('',(0.,-1.,0.)); +#310859 = ADVANCED_FACE('',(#310860),#310887,.T.); +#310860 = FACE_BOUND('',#310861,.F.); +#310861 = EDGE_LOOP('',(#310862,#310863,#310872,#310880)); +#310862 = ORIENTED_EDGE('',*,*,#310841,.T.); +#310863 = ORIENTED_EDGE('',*,*,#310864,.T.); +#310864 = EDGE_CURVE('',#310834,#310865,#310867,.T.); +#310865 = VERTEX_POINT('',#310866); +#310866 = CARTESIAN_POINT('',(152.594454,-87.990597,-3.5E-02)); +#310867 = CIRCLE('',#310868,0.274999582384); +#310868 = AXIS2_PLACEMENT_3D('',#310869,#310870,#310871); +#310869 = CARTESIAN_POINT('',(152.40000041761,-87.79614244333,-3.5E-02) + ); +#310870 = DIRECTION('',(0.,0.,-1.)); +#310871 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#310872 = ORIENTED_EDGE('',*,*,#310873,.F.); +#310873 = EDGE_CURVE('',#310874,#310865,#310876,.T.); +#310874 = VERTEX_POINT('',#310875); +#310875 = CARTESIAN_POINT('',(152.594454,-87.990597,0.)); +#310876 = LINE('',#310877,#310878); +#310877 = CARTESIAN_POINT('',(152.594454,-87.990597,0.)); +#310878 = VECTOR('',#310879,1.); +#310879 = DIRECTION('',(0.,0.,-1.)); +#310880 = ORIENTED_EDGE('',*,*,#310881,.F.); +#310881 = EDGE_CURVE('',#310842,#310874,#310882,.T.); +#310882 = CIRCLE('',#310883,0.274999582384); +#310883 = AXIS2_PLACEMENT_3D('',#310884,#310885,#310886); +#310884 = CARTESIAN_POINT('',(152.40000041761,-87.79614244333,0.)); +#310885 = DIRECTION('',(0.,0.,-1.)); +#310886 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#310887 = CYLINDRICAL_SURFACE('',#310888,0.274999582384); +#310888 = AXIS2_PLACEMENT_3D('',#310889,#310890,#310891); +#310889 = CARTESIAN_POINT('',(152.40000041761,-87.79614244333,0.)); +#310890 = DIRECTION('',(-0.,-0.,1.)); +#310891 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#310892 = ADVANCED_FACE('',(#310893),#310918,.F.); +#310893 = FACE_BOUND('',#310894,.F.); +#310894 = EDGE_LOOP('',(#310895,#310896,#310904,#310912)); +#310895 = ORIENTED_EDGE('',*,*,#310873,.T.); +#310896 = ORIENTED_EDGE('',*,*,#310897,.T.); +#310897 = EDGE_CURVE('',#310865,#310898,#310900,.T.); +#310898 = VERTEX_POINT('',#310899); +#310899 = CARTESIAN_POINT('',(152.5,-88.08505,-3.5E-02)); +#310900 = LINE('',#310901,#310902); +#310901 = CARTESIAN_POINT('',(152.594454,-87.990597,-3.5E-02)); +#310902 = VECTOR('',#310903,1.); +#310903 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#310904 = ORIENTED_EDGE('',*,*,#310905,.F.); +#310905 = EDGE_CURVE('',#310906,#310898,#310908,.T.); +#310906 = VERTEX_POINT('',#310907); +#310907 = CARTESIAN_POINT('',(152.5,-88.08505,0.)); +#310908 = LINE('',#310909,#310910); +#310909 = CARTESIAN_POINT('',(152.5,-88.08505,0.)); +#310910 = VECTOR('',#310911,1.); +#310911 = DIRECTION('',(0.,0.,-1.)); +#310912 = ORIENTED_EDGE('',*,*,#310913,.F.); +#310913 = EDGE_CURVE('',#310874,#310906,#310914,.T.); +#310914 = LINE('',#310915,#310916); +#310915 = CARTESIAN_POINT('',(152.594454,-87.990597,0.)); +#310916 = VECTOR('',#310917,1.); +#310917 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#310918 = PLANE('',#310919); +#310919 = AXIS2_PLACEMENT_3D('',#310920,#310921,#310922); +#310920 = CARTESIAN_POINT('',(152.594454,-87.990597,0.)); +#310921 = DIRECTION('',(-0.707103038029,0.707110524324,0.)); +#310922 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#310923 = ADVANCED_FACE('',(#310924),#310949,.F.); +#310924 = FACE_BOUND('',#310925,.F.); +#310925 = EDGE_LOOP('',(#310926,#310927,#310935,#310943)); +#310926 = ORIENTED_EDGE('',*,*,#310905,.T.); +#310927 = ORIENTED_EDGE('',*,*,#310928,.T.); +#310928 = EDGE_CURVE('',#310898,#310929,#310931,.T.); +#310929 = VERTEX_POINT('',#310930); +#310930 = CARTESIAN_POINT('',(152.5,-88.664949,-3.5E-02)); +#310931 = LINE('',#310932,#310933); +#310932 = CARTESIAN_POINT('',(152.5,-88.08505,-3.5E-02)); +#310933 = VECTOR('',#310934,1.); +#310934 = DIRECTION('',(0.,-1.,0.)); +#310935 = ORIENTED_EDGE('',*,*,#310936,.F.); +#310936 = EDGE_CURVE('',#310937,#310929,#310939,.T.); +#310937 = VERTEX_POINT('',#310938); +#310938 = CARTESIAN_POINT('',(152.5,-88.664949,0.)); +#310939 = LINE('',#310940,#310941); +#310940 = CARTESIAN_POINT('',(152.5,-88.664949,0.)); +#310941 = VECTOR('',#310942,1.); +#310942 = DIRECTION('',(0.,0.,-1.)); +#310943 = ORIENTED_EDGE('',*,*,#310944,.F.); +#310944 = EDGE_CURVE('',#310906,#310937,#310945,.T.); +#310945 = LINE('',#310946,#310947); +#310946 = CARTESIAN_POINT('',(152.5,-88.08505,0.)); +#310947 = VECTOR('',#310948,1.); +#310948 = DIRECTION('',(0.,-1.,0.)); +#310949 = PLANE('',#310950); +#310950 = AXIS2_PLACEMENT_3D('',#310951,#310952,#310953); +#310951 = CARTESIAN_POINT('',(152.5,-88.08505,0.)); +#310952 = DIRECTION('',(-1.,-0.,-0.)); +#310953 = DIRECTION('',(0.,-1.,0.)); +#310954 = ADVANCED_FACE('',(#310955),#310980,.F.); +#310955 = FACE_BOUND('',#310956,.F.); +#310956 = EDGE_LOOP('',(#310957,#310958,#310966,#310974)); +#310957 = ORIENTED_EDGE('',*,*,#310936,.T.); +#310958 = ORIENTED_EDGE('',*,*,#310959,.T.); +#310959 = EDGE_CURVE('',#310929,#310960,#310962,.T.); +#310960 = VERTEX_POINT('',#310961); +#310961 = CARTESIAN_POINT('',(152.594454,-88.759403,-3.5E-02)); +#310962 = LINE('',#310963,#310964); +#310963 = CARTESIAN_POINT('',(152.5,-88.664949,-3.5E-02)); +#310964 = VECTOR('',#310965,1.); +#310965 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310966 = ORIENTED_EDGE('',*,*,#310967,.F.); +#310967 = EDGE_CURVE('',#310968,#310960,#310970,.T.); +#310968 = VERTEX_POINT('',#310969); +#310969 = CARTESIAN_POINT('',(152.594454,-88.759403,0.)); +#310970 = LINE('',#310971,#310972); +#310971 = CARTESIAN_POINT('',(152.594454,-88.759403,0.)); +#310972 = VECTOR('',#310973,1.); +#310973 = DIRECTION('',(0.,0.,-1.)); +#310974 = ORIENTED_EDGE('',*,*,#310975,.F.); +#310975 = EDGE_CURVE('',#310937,#310968,#310976,.T.); +#310976 = LINE('',#310977,#310978); +#310977 = CARTESIAN_POINT('',(152.5,-88.664949,0.)); +#310978 = VECTOR('',#310979,1.); +#310979 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310980 = PLANE('',#310981); +#310981 = AXIS2_PLACEMENT_3D('',#310982,#310983,#310984); +#310982 = CARTESIAN_POINT('',(152.5,-88.664949,0.)); +#310983 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#310984 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#310985 = ADVANCED_FACE('',(#310986),#311013,.T.); +#310986 = FACE_BOUND('',#310987,.F.); +#310987 = EDGE_LOOP('',(#310988,#310989,#310998,#311006)); +#310988 = ORIENTED_EDGE('',*,*,#310967,.T.); +#310989 = ORIENTED_EDGE('',*,*,#310990,.T.); +#310990 = EDGE_CURVE('',#310960,#310991,#310993,.T.); +#310991 = VERTEX_POINT('',#310992); +#310992 = CARTESIAN_POINT('',(152.675,-88.953858,-3.5E-02)); +#310993 = CIRCLE('',#310994,0.275002697077); +#310994 = AXIS2_PLACEMENT_3D('',#310995,#310996,#310997); +#310995 = CARTESIAN_POINT('',(152.39999730292,-88.95385884681,-3.5E-02) + ); +#310996 = DIRECTION('',(0.,0.,-1.)); +#310997 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#310998 = ORIENTED_EDGE('',*,*,#310999,.F.); +#310999 = EDGE_CURVE('',#311000,#310991,#311002,.T.); +#311000 = VERTEX_POINT('',#311001); +#311001 = CARTESIAN_POINT('',(152.675,-88.953858,0.)); +#311002 = LINE('',#311003,#311004); +#311003 = CARTESIAN_POINT('',(152.675,-88.953858,0.)); +#311004 = VECTOR('',#311005,1.); +#311005 = DIRECTION('',(0.,0.,-1.)); +#311006 = ORIENTED_EDGE('',*,*,#311007,.F.); +#311007 = EDGE_CURVE('',#310968,#311000,#311008,.T.); +#311008 = CIRCLE('',#311009,0.275002697077); +#311009 = AXIS2_PLACEMENT_3D('',#311010,#311011,#311012); +#311010 = CARTESIAN_POINT('',(152.39999730292,-88.95385884681,0.)); +#311011 = DIRECTION('',(0.,0.,-1.)); +#311012 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311013 = CYLINDRICAL_SURFACE('',#311014,0.275002697077); +#311014 = AXIS2_PLACEMENT_3D('',#311015,#311016,#311017); +#311015 = CARTESIAN_POINT('',(152.39999730292,-88.95385884681,0.)); +#311016 = DIRECTION('',(-0.,-0.,1.)); +#311017 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311018 = ADVANCED_FACE('',(#311019),#311044,.F.); +#311019 = FACE_BOUND('',#311020,.F.); +#311020 = EDGE_LOOP('',(#311021,#311022,#311030,#311038)); +#311021 = ORIENTED_EDGE('',*,*,#310999,.T.); +#311022 = ORIENTED_EDGE('',*,*,#311023,.T.); +#311023 = EDGE_CURVE('',#310991,#311024,#311026,.T.); +#311024 = VERTEX_POINT('',#311025); +#311025 = CARTESIAN_POINT('',(152.675,-92.046142,-3.5E-02)); +#311026 = LINE('',#311027,#311028); +#311027 = CARTESIAN_POINT('',(152.675,-88.953858,-3.5E-02)); +#311028 = VECTOR('',#311029,1.); +#311029 = DIRECTION('',(0.,-1.,0.)); +#311030 = ORIENTED_EDGE('',*,*,#311031,.F.); +#311031 = EDGE_CURVE('',#311032,#311024,#311034,.T.); +#311032 = VERTEX_POINT('',#311033); +#311033 = CARTESIAN_POINT('',(152.675,-92.046142,0.)); +#311034 = LINE('',#311035,#311036); +#311035 = CARTESIAN_POINT('',(152.675,-92.046142,0.)); +#311036 = VECTOR('',#311037,1.); +#311037 = DIRECTION('',(0.,0.,-1.)); +#311038 = ORIENTED_EDGE('',*,*,#311039,.F.); +#311039 = EDGE_CURVE('',#311000,#311032,#311040,.T.); +#311040 = LINE('',#311041,#311042); +#311041 = CARTESIAN_POINT('',(152.675,-88.953858,0.)); +#311042 = VECTOR('',#311043,1.); +#311043 = DIRECTION('',(0.,-1.,0.)); +#311044 = PLANE('',#311045); +#311045 = AXIS2_PLACEMENT_3D('',#311046,#311047,#311048); +#311046 = CARTESIAN_POINT('',(152.675,-88.953858,0.)); +#311047 = DIRECTION('',(-1.,-0.,-0.)); +#311048 = DIRECTION('',(0.,-1.,0.)); +#311049 = ADVANCED_FACE('',(#311050),#311077,.T.); +#311050 = FACE_BOUND('',#311051,.F.); +#311051 = EDGE_LOOP('',(#311052,#311053,#311062,#311070)); +#311052 = ORIENTED_EDGE('',*,*,#311031,.T.); +#311053 = ORIENTED_EDGE('',*,*,#311054,.T.); +#311054 = EDGE_CURVE('',#311024,#311055,#311057,.T.); +#311055 = VERTEX_POINT('',#311056); +#311056 = CARTESIAN_POINT('',(152.594454,-92.240597,-3.5E-02)); +#311057 = CIRCLE('',#311058,0.274999582384); +#311058 = AXIS2_PLACEMENT_3D('',#311059,#311060,#311061); +#311059 = CARTESIAN_POINT('',(152.40000041761,-92.04614244333,-3.5E-02) + ); +#311060 = DIRECTION('',(0.,0.,-1.)); +#311061 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#311062 = ORIENTED_EDGE('',*,*,#311063,.F.); +#311063 = EDGE_CURVE('',#311064,#311055,#311066,.T.); +#311064 = VERTEX_POINT('',#311065); +#311065 = CARTESIAN_POINT('',(152.594454,-92.240597,0.)); +#311066 = LINE('',#311067,#311068); +#311067 = CARTESIAN_POINT('',(152.594454,-92.240597,0.)); +#311068 = VECTOR('',#311069,1.); +#311069 = DIRECTION('',(0.,0.,-1.)); +#311070 = ORIENTED_EDGE('',*,*,#311071,.F.); +#311071 = EDGE_CURVE('',#311032,#311064,#311072,.T.); +#311072 = CIRCLE('',#311073,0.274999582384); +#311073 = AXIS2_PLACEMENT_3D('',#311074,#311075,#311076); +#311074 = CARTESIAN_POINT('',(152.40000041761,-92.04614244333,0.)); +#311075 = DIRECTION('',(0.,0.,-1.)); +#311076 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#311077 = CYLINDRICAL_SURFACE('',#311078,0.274999582384); +#311078 = AXIS2_PLACEMENT_3D('',#311079,#311080,#311081); +#311079 = CARTESIAN_POINT('',(152.40000041761,-92.04614244333,0.)); +#311080 = DIRECTION('',(-0.,-0.,1.)); +#311081 = DIRECTION('',(0.999999999999,1.612113277638E-06,0.)); +#311082 = ADVANCED_FACE('',(#311083),#311108,.F.); +#311083 = FACE_BOUND('',#311084,.F.); +#311084 = EDGE_LOOP('',(#311085,#311086,#311094,#311102)); +#311085 = ORIENTED_EDGE('',*,*,#311063,.T.); +#311086 = ORIENTED_EDGE('',*,*,#311087,.T.); +#311087 = EDGE_CURVE('',#311055,#311088,#311090,.T.); +#311088 = VERTEX_POINT('',#311089); +#311089 = CARTESIAN_POINT('',(152.5,-92.33505,-3.5E-02)); +#311090 = LINE('',#311091,#311092); +#311091 = CARTESIAN_POINT('',(152.594454,-92.240597,-3.5E-02)); +#311092 = VECTOR('',#311093,1.); +#311093 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311094 = ORIENTED_EDGE('',*,*,#311095,.F.); +#311095 = EDGE_CURVE('',#311096,#311088,#311098,.T.); +#311096 = VERTEX_POINT('',#311097); +#311097 = CARTESIAN_POINT('',(152.5,-92.33505,0.)); +#311098 = LINE('',#311099,#311100); +#311099 = CARTESIAN_POINT('',(152.5,-92.33505,0.)); +#311100 = VECTOR('',#311101,1.); +#311101 = DIRECTION('',(0.,0.,-1.)); +#311102 = ORIENTED_EDGE('',*,*,#311103,.F.); +#311103 = EDGE_CURVE('',#311064,#311096,#311104,.T.); +#311104 = LINE('',#311105,#311106); +#311105 = CARTESIAN_POINT('',(152.594454,-92.240597,0.)); +#311106 = VECTOR('',#311107,1.); +#311107 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311108 = PLANE('',#311109); +#311109 = AXIS2_PLACEMENT_3D('',#311110,#311111,#311112); +#311110 = CARTESIAN_POINT('',(152.594454,-92.240597,0.)); +#311111 = DIRECTION('',(-0.707103038029,0.707110524324,0.)); +#311112 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311113 = ADVANCED_FACE('',(#311114),#311139,.F.); +#311114 = FACE_BOUND('',#311115,.F.); +#311115 = EDGE_LOOP('',(#311116,#311117,#311125,#311133)); +#311116 = ORIENTED_EDGE('',*,*,#311095,.T.); +#311117 = ORIENTED_EDGE('',*,*,#311118,.T.); +#311118 = EDGE_CURVE('',#311088,#311119,#311121,.T.); +#311119 = VERTEX_POINT('',#311120); +#311120 = CARTESIAN_POINT('',(152.5,-92.914949,-3.5E-02)); +#311121 = LINE('',#311122,#311123); +#311122 = CARTESIAN_POINT('',(152.5,-92.33505,-3.5E-02)); +#311123 = VECTOR('',#311124,1.); +#311124 = DIRECTION('',(0.,-1.,0.)); +#311125 = ORIENTED_EDGE('',*,*,#311126,.F.); +#311126 = EDGE_CURVE('',#311127,#311119,#311129,.T.); +#311127 = VERTEX_POINT('',#311128); +#311128 = CARTESIAN_POINT('',(152.5,-92.914949,0.)); +#311129 = LINE('',#311130,#311131); +#311130 = CARTESIAN_POINT('',(152.5,-92.914949,0.)); +#311131 = VECTOR('',#311132,1.); +#311132 = DIRECTION('',(0.,0.,-1.)); +#311133 = ORIENTED_EDGE('',*,*,#311134,.F.); +#311134 = EDGE_CURVE('',#311096,#311127,#311135,.T.); +#311135 = LINE('',#311136,#311137); +#311136 = CARTESIAN_POINT('',(152.5,-92.33505,0.)); +#311137 = VECTOR('',#311138,1.); +#311138 = DIRECTION('',(0.,-1.,0.)); +#311139 = PLANE('',#311140); +#311140 = AXIS2_PLACEMENT_3D('',#311141,#311142,#311143); +#311141 = CARTESIAN_POINT('',(152.5,-92.33505,0.)); +#311142 = DIRECTION('',(-1.,-0.,-0.)); +#311143 = DIRECTION('',(0.,-1.,0.)); +#311144 = ADVANCED_FACE('',(#311145),#311170,.F.); +#311145 = FACE_BOUND('',#311146,.F.); +#311146 = EDGE_LOOP('',(#311147,#311148,#311156,#311164)); +#311147 = ORIENTED_EDGE('',*,*,#311126,.T.); +#311148 = ORIENTED_EDGE('',*,*,#311149,.T.); +#311149 = EDGE_CURVE('',#311119,#311150,#311152,.T.); +#311150 = VERTEX_POINT('',#311151); +#311151 = CARTESIAN_POINT('',(152.594454,-93.009403,-3.5E-02)); +#311152 = LINE('',#311153,#311154); +#311153 = CARTESIAN_POINT('',(152.5,-92.914949,-3.5E-02)); +#311154 = VECTOR('',#311155,1.); +#311155 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#311156 = ORIENTED_EDGE('',*,*,#311157,.F.); +#311157 = EDGE_CURVE('',#311158,#311150,#311160,.T.); +#311158 = VERTEX_POINT('',#311159); +#311159 = CARTESIAN_POINT('',(152.594454,-93.009403,0.)); +#311160 = LINE('',#311161,#311162); +#311161 = CARTESIAN_POINT('',(152.594454,-93.009403,0.)); +#311162 = VECTOR('',#311163,1.); +#311163 = DIRECTION('',(0.,0.,-1.)); +#311164 = ORIENTED_EDGE('',*,*,#311165,.F.); +#311165 = EDGE_CURVE('',#311127,#311158,#311166,.T.); +#311166 = LINE('',#311167,#311168); +#311167 = CARTESIAN_POINT('',(152.5,-92.914949,0.)); +#311168 = VECTOR('',#311169,1.); +#311169 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#311170 = PLANE('',#311171); +#311171 = AXIS2_PLACEMENT_3D('',#311172,#311173,#311174); +#311172 = CARTESIAN_POINT('',(152.5,-92.914949,0.)); +#311173 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#311174 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#311175 = ADVANCED_FACE('',(#311176),#311203,.T.); +#311176 = FACE_BOUND('',#311177,.F.); +#311177 = EDGE_LOOP('',(#311178,#311179,#311188,#311196)); +#311178 = ORIENTED_EDGE('',*,*,#311157,.T.); +#311179 = ORIENTED_EDGE('',*,*,#311180,.T.); +#311180 = EDGE_CURVE('',#311150,#311181,#311183,.T.); +#311181 = VERTEX_POINT('',#311182); +#311182 = CARTESIAN_POINT('',(152.675,-93.203858,-3.5E-02)); +#311183 = CIRCLE('',#311184,0.275002697077); +#311184 = AXIS2_PLACEMENT_3D('',#311185,#311186,#311187); +#311185 = CARTESIAN_POINT('',(152.39999730292,-93.20385884681,-3.5E-02) + ); +#311186 = DIRECTION('',(0.,0.,-1.)); +#311187 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311188 = ORIENTED_EDGE('',*,*,#311189,.F.); +#311189 = EDGE_CURVE('',#311190,#311181,#311192,.T.); +#311190 = VERTEX_POINT('',#311191); +#311191 = CARTESIAN_POINT('',(152.675,-93.203858,0.)); +#311192 = LINE('',#311193,#311194); +#311193 = CARTESIAN_POINT('',(152.675,-93.203858,0.)); +#311194 = VECTOR('',#311195,1.); +#311195 = DIRECTION('',(0.,0.,-1.)); +#311196 = ORIENTED_EDGE('',*,*,#311197,.F.); +#311197 = EDGE_CURVE('',#311158,#311190,#311198,.T.); +#311198 = CIRCLE('',#311199,0.275002697077); +#311199 = AXIS2_PLACEMENT_3D('',#311200,#311201,#311202); +#311200 = CARTESIAN_POINT('',(152.39999730292,-93.20385884681,0.)); +#311201 = DIRECTION('',(0.,0.,-1.)); +#311202 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311203 = CYLINDRICAL_SURFACE('',#311204,0.275002697077); +#311204 = AXIS2_PLACEMENT_3D('',#311205,#311206,#311207); +#311205 = CARTESIAN_POINT('',(152.39999730292,-93.20385884681,0.)); +#311206 = DIRECTION('',(-0.,-0.,1.)); +#311207 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311208 = ADVANCED_FACE('',(#311209),#311234,.F.); +#311209 = FACE_BOUND('',#311210,.F.); +#311210 = EDGE_LOOP('',(#311211,#311212,#311220,#311228)); +#311211 = ORIENTED_EDGE('',*,*,#311189,.T.); +#311212 = ORIENTED_EDGE('',*,*,#311213,.T.); +#311213 = EDGE_CURVE('',#311181,#311214,#311216,.T.); +#311214 = VERTEX_POINT('',#311215); +#311215 = CARTESIAN_POINT('',(152.675,-97.821142,-3.5E-02)); +#311216 = LINE('',#311217,#311218); +#311217 = CARTESIAN_POINT('',(152.675,-93.203858,-3.5E-02)); +#311218 = VECTOR('',#311219,1.); +#311219 = DIRECTION('',(0.,-1.,0.)); +#311220 = ORIENTED_EDGE('',*,*,#311221,.F.); +#311221 = EDGE_CURVE('',#311222,#311214,#311224,.T.); +#311222 = VERTEX_POINT('',#311223); +#311223 = CARTESIAN_POINT('',(152.675,-97.821142,0.)); +#311224 = LINE('',#311225,#311226); +#311225 = CARTESIAN_POINT('',(152.675,-97.821142,0.)); +#311226 = VECTOR('',#311227,1.); +#311227 = DIRECTION('',(0.,0.,-1.)); +#311228 = ORIENTED_EDGE('',*,*,#311229,.F.); +#311229 = EDGE_CURVE('',#311190,#311222,#311230,.T.); +#311230 = LINE('',#311231,#311232); +#311231 = CARTESIAN_POINT('',(152.675,-93.203858,0.)); +#311232 = VECTOR('',#311233,1.); +#311233 = DIRECTION('',(0.,-1.,0.)); +#311234 = PLANE('',#311235); +#311235 = AXIS2_PLACEMENT_3D('',#311236,#311237,#311238); +#311236 = CARTESIAN_POINT('',(152.675,-93.203858,0.)); +#311237 = DIRECTION('',(-1.,-0.,-0.)); +#311238 = DIRECTION('',(0.,-1.,0.)); +#311239 = ADVANCED_FACE('',(#311240),#311267,.T.); +#311240 = FACE_BOUND('',#311241,.F.); +#311241 = EDGE_LOOP('',(#311242,#311243,#311252,#311260)); +#311242 = ORIENTED_EDGE('',*,*,#311221,.T.); +#311243 = ORIENTED_EDGE('',*,*,#311244,.T.); +#311244 = EDGE_CURVE('',#311214,#311245,#311247,.T.); +#311245 = VERTEX_POINT('',#311246); +#311246 = CARTESIAN_POINT('',(152.594454,-98.015597,-3.5E-02)); +#311247 = CIRCLE('',#311248,0.274999582384); +#311248 = AXIS2_PLACEMENT_3D('',#311249,#311250,#311251); +#311249 = CARTESIAN_POINT('',(152.40000041761,-97.82114244333,-3.5E-02) + ); +#311250 = DIRECTION('',(0.,0.,-1.)); +#311251 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311252 = ORIENTED_EDGE('',*,*,#311253,.F.); +#311253 = EDGE_CURVE('',#311254,#311245,#311256,.T.); +#311254 = VERTEX_POINT('',#311255); +#311255 = CARTESIAN_POINT('',(152.594454,-98.015597,0.)); +#311256 = LINE('',#311257,#311258); +#311257 = CARTESIAN_POINT('',(152.594454,-98.015597,0.)); +#311258 = VECTOR('',#311259,1.); +#311259 = DIRECTION('',(0.,0.,-1.)); +#311260 = ORIENTED_EDGE('',*,*,#311261,.F.); +#311261 = EDGE_CURVE('',#311222,#311254,#311262,.T.); +#311262 = CIRCLE('',#311263,0.274999582384); +#311263 = AXIS2_PLACEMENT_3D('',#311264,#311265,#311266); +#311264 = CARTESIAN_POINT('',(152.40000041761,-97.82114244333,0.)); +#311265 = DIRECTION('',(0.,0.,-1.)); +#311266 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311267 = CYLINDRICAL_SURFACE('',#311268,0.274999582384); +#311268 = AXIS2_PLACEMENT_3D('',#311269,#311270,#311271); +#311269 = CARTESIAN_POINT('',(152.40000041761,-97.82114244333,0.)); +#311270 = DIRECTION('',(-0.,-0.,1.)); +#311271 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311272 = ADVANCED_FACE('',(#311273),#311298,.F.); +#311273 = FACE_BOUND('',#311274,.F.); +#311274 = EDGE_LOOP('',(#311275,#311276,#311284,#311292)); +#311275 = ORIENTED_EDGE('',*,*,#311253,.T.); +#311276 = ORIENTED_EDGE('',*,*,#311277,.T.); +#311277 = EDGE_CURVE('',#311245,#311278,#311280,.T.); +#311278 = VERTEX_POINT('',#311279); +#311279 = CARTESIAN_POINT('',(152.5,-98.11005,-3.5E-02)); +#311280 = LINE('',#311281,#311282); +#311281 = CARTESIAN_POINT('',(152.594454,-98.015597,-3.5E-02)); +#311282 = VECTOR('',#311283,1.); +#311283 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311284 = ORIENTED_EDGE('',*,*,#311285,.F.); +#311285 = EDGE_CURVE('',#311286,#311278,#311288,.T.); +#311286 = VERTEX_POINT('',#311287); +#311287 = CARTESIAN_POINT('',(152.5,-98.11005,0.)); +#311288 = LINE('',#311289,#311290); +#311289 = CARTESIAN_POINT('',(152.5,-98.11005,0.)); +#311290 = VECTOR('',#311291,1.); +#311291 = DIRECTION('',(0.,0.,-1.)); +#311292 = ORIENTED_EDGE('',*,*,#311293,.F.); +#311293 = EDGE_CURVE('',#311254,#311286,#311294,.T.); +#311294 = LINE('',#311295,#311296); +#311295 = CARTESIAN_POINT('',(152.594454,-98.015597,0.)); +#311296 = VECTOR('',#311297,1.); +#311297 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311298 = PLANE('',#311299); +#311299 = AXIS2_PLACEMENT_3D('',#311300,#311301,#311302); +#311300 = CARTESIAN_POINT('',(152.594454,-98.015597,0.)); +#311301 = DIRECTION('',(-0.707103038029,0.707110524324,0.)); +#311302 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311303 = ADVANCED_FACE('',(#311304),#311329,.F.); +#311304 = FACE_BOUND('',#311305,.F.); +#311305 = EDGE_LOOP('',(#311306,#311307,#311315,#311323)); +#311306 = ORIENTED_EDGE('',*,*,#311285,.T.); +#311307 = ORIENTED_EDGE('',*,*,#311308,.T.); +#311308 = EDGE_CURVE('',#311278,#311309,#311311,.T.); +#311309 = VERTEX_POINT('',#311310); +#311310 = CARTESIAN_POINT('',(152.5,-98.689949,-3.5E-02)); +#311311 = LINE('',#311312,#311313); +#311312 = CARTESIAN_POINT('',(152.5,-98.11005,-3.5E-02)); +#311313 = VECTOR('',#311314,1.); +#311314 = DIRECTION('',(0.,-1.,0.)); +#311315 = ORIENTED_EDGE('',*,*,#311316,.F.); +#311316 = EDGE_CURVE('',#311317,#311309,#311319,.T.); +#311317 = VERTEX_POINT('',#311318); +#311318 = CARTESIAN_POINT('',(152.5,-98.689949,0.)); +#311319 = LINE('',#311320,#311321); +#311320 = CARTESIAN_POINT('',(152.5,-98.689949,0.)); +#311321 = VECTOR('',#311322,1.); +#311322 = DIRECTION('',(0.,0.,-1.)); +#311323 = ORIENTED_EDGE('',*,*,#311324,.F.); +#311324 = EDGE_CURVE('',#311286,#311317,#311325,.T.); +#311325 = LINE('',#311326,#311327); +#311326 = CARTESIAN_POINT('',(152.5,-98.11005,0.)); +#311327 = VECTOR('',#311328,1.); +#311328 = DIRECTION('',(0.,-1.,0.)); +#311329 = PLANE('',#311330); +#311330 = AXIS2_PLACEMENT_3D('',#311331,#311332,#311333); +#311331 = CARTESIAN_POINT('',(152.5,-98.11005,0.)); +#311332 = DIRECTION('',(-1.,-0.,-0.)); +#311333 = DIRECTION('',(0.,-1.,0.)); +#311334 = ADVANCED_FACE('',(#311335),#311360,.F.); +#311335 = FACE_BOUND('',#311336,.F.); +#311336 = EDGE_LOOP('',(#311337,#311338,#311346,#311354)); +#311337 = ORIENTED_EDGE('',*,*,#311316,.T.); +#311338 = ORIENTED_EDGE('',*,*,#311339,.T.); +#311339 = EDGE_CURVE('',#311309,#311340,#311342,.T.); +#311340 = VERTEX_POINT('',#311341); +#311341 = CARTESIAN_POINT('',(152.594454,-98.784403,-3.5E-02)); +#311342 = LINE('',#311343,#311344); +#311343 = CARTESIAN_POINT('',(152.5,-98.689949,-3.5E-02)); +#311344 = VECTOR('',#311345,1.); +#311345 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311346 = ORIENTED_EDGE('',*,*,#311347,.F.); +#311347 = EDGE_CURVE('',#311348,#311340,#311350,.T.); +#311348 = VERTEX_POINT('',#311349); +#311349 = CARTESIAN_POINT('',(152.594454,-98.784403,0.)); +#311350 = LINE('',#311351,#311352); +#311351 = CARTESIAN_POINT('',(152.594454,-98.784403,0.)); +#311352 = VECTOR('',#311353,1.); +#311353 = DIRECTION('',(0.,0.,-1.)); +#311354 = ORIENTED_EDGE('',*,*,#311355,.F.); +#311355 = EDGE_CURVE('',#311317,#311348,#311356,.T.); +#311356 = LINE('',#311357,#311358); +#311357 = CARTESIAN_POINT('',(152.5,-98.689949,0.)); +#311358 = VECTOR('',#311359,1.); +#311359 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311360 = PLANE('',#311361); +#311361 = AXIS2_PLACEMENT_3D('',#311362,#311363,#311364); +#311362 = CARTESIAN_POINT('',(152.5,-98.689949,0.)); +#311363 = DIRECTION('',(-0.707106781186,-0.707106781187,-0.)); +#311364 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311365 = ADVANCED_FACE('',(#311366),#311393,.T.); +#311366 = FACE_BOUND('',#311367,.F.); +#311367 = EDGE_LOOP('',(#311368,#311369,#311378,#311386)); +#311368 = ORIENTED_EDGE('',*,*,#311347,.T.); +#311369 = ORIENTED_EDGE('',*,*,#311370,.T.); +#311370 = EDGE_CURVE('',#311340,#311371,#311373,.T.); +#311371 = VERTEX_POINT('',#311372); +#311372 = CARTESIAN_POINT('',(152.675,-98.978858,-3.5E-02)); +#311373 = CIRCLE('',#311374,0.275002697077); +#311374 = AXIS2_PLACEMENT_3D('',#311375,#311376,#311377); +#311375 = CARTESIAN_POINT('',(152.39999730292,-98.97885884681,-3.5E-02) + ); +#311376 = DIRECTION('',(0.,0.,-1.)); +#311377 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311378 = ORIENTED_EDGE('',*,*,#311379,.F.); +#311379 = EDGE_CURVE('',#311380,#311371,#311382,.T.); +#311380 = VERTEX_POINT('',#311381); +#311381 = CARTESIAN_POINT('',(152.675,-98.978858,0.)); +#311382 = LINE('',#311383,#311384); +#311383 = CARTESIAN_POINT('',(152.675,-98.978858,0.)); +#311384 = VECTOR('',#311385,1.); +#311385 = DIRECTION('',(0.,0.,-1.)); +#311386 = ORIENTED_EDGE('',*,*,#311387,.F.); +#311387 = EDGE_CURVE('',#311348,#311380,#311388,.T.); +#311388 = CIRCLE('',#311389,0.275002697077); +#311389 = AXIS2_PLACEMENT_3D('',#311390,#311391,#311392); +#311390 = CARTESIAN_POINT('',(152.39999730292,-98.97885884681,0.)); +#311391 = DIRECTION('',(0.,0.,-1.)); +#311392 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311393 = CYLINDRICAL_SURFACE('',#311394,0.275002697077); +#311394 = AXIS2_PLACEMENT_3D('',#311395,#311396,#311397); +#311395 = CARTESIAN_POINT('',(152.39999730292,-98.97885884681,0.)); +#311396 = DIRECTION('',(-0.,-0.,1.)); +#311397 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311398 = ADVANCED_FACE('',(#311399),#311424,.F.); +#311399 = FACE_BOUND('',#311400,.F.); +#311400 = EDGE_LOOP('',(#311401,#311402,#311410,#311418)); +#311401 = ORIENTED_EDGE('',*,*,#311379,.T.); +#311402 = ORIENTED_EDGE('',*,*,#311403,.T.); +#311403 = EDGE_CURVE('',#311371,#311404,#311406,.T.); +#311404 = VERTEX_POINT('',#311405); +#311405 = CARTESIAN_POINT('',(152.675,-102.071142,-3.5E-02)); +#311406 = LINE('',#311407,#311408); +#311407 = CARTESIAN_POINT('',(152.675,-98.978858,-3.5E-02)); +#311408 = VECTOR('',#311409,1.); +#311409 = DIRECTION('',(0.,-1.,0.)); +#311410 = ORIENTED_EDGE('',*,*,#311411,.F.); +#311411 = EDGE_CURVE('',#311412,#311404,#311414,.T.); +#311412 = VERTEX_POINT('',#311413); +#311413 = CARTESIAN_POINT('',(152.675,-102.071142,0.)); +#311414 = LINE('',#311415,#311416); +#311415 = CARTESIAN_POINT('',(152.675,-102.071142,0.)); +#311416 = VECTOR('',#311417,1.); +#311417 = DIRECTION('',(0.,0.,-1.)); +#311418 = ORIENTED_EDGE('',*,*,#311419,.F.); +#311419 = EDGE_CURVE('',#311380,#311412,#311420,.T.); +#311420 = LINE('',#311421,#311422); +#311421 = CARTESIAN_POINT('',(152.675,-98.978858,0.)); +#311422 = VECTOR('',#311423,1.); +#311423 = DIRECTION('',(0.,-1.,0.)); +#311424 = PLANE('',#311425); +#311425 = AXIS2_PLACEMENT_3D('',#311426,#311427,#311428); +#311426 = CARTESIAN_POINT('',(152.675,-98.978858,0.)); +#311427 = DIRECTION('',(-1.,-0.,-0.)); +#311428 = DIRECTION('',(0.,-1.,0.)); +#311429 = ADVANCED_FACE('',(#311430),#311457,.T.); +#311430 = FACE_BOUND('',#311431,.F.); +#311431 = EDGE_LOOP('',(#311432,#311433,#311442,#311450)); +#311432 = ORIENTED_EDGE('',*,*,#311411,.T.); +#311433 = ORIENTED_EDGE('',*,*,#311434,.T.); +#311434 = EDGE_CURVE('',#311404,#311435,#311437,.T.); +#311435 = VERTEX_POINT('',#311436); +#311436 = CARTESIAN_POINT('',(152.594454,-102.265597,-3.5E-02)); +#311437 = CIRCLE('',#311438,0.274999582384); +#311438 = AXIS2_PLACEMENT_3D('',#311439,#311440,#311441); +#311439 = CARTESIAN_POINT('',(152.40000041761,-102.0711424433,-3.5E-02) + ); +#311440 = DIRECTION('',(0.,0.,-1.)); +#311441 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311442 = ORIENTED_EDGE('',*,*,#311443,.F.); +#311443 = EDGE_CURVE('',#311444,#311435,#311446,.T.); +#311444 = VERTEX_POINT('',#311445); +#311445 = CARTESIAN_POINT('',(152.594454,-102.265597,0.)); +#311446 = LINE('',#311447,#311448); +#311447 = CARTESIAN_POINT('',(152.594454,-102.265597,0.)); +#311448 = VECTOR('',#311449,1.); +#311449 = DIRECTION('',(0.,0.,-1.)); +#311450 = ORIENTED_EDGE('',*,*,#311451,.F.); +#311451 = EDGE_CURVE('',#311412,#311444,#311452,.T.); +#311452 = CIRCLE('',#311453,0.274999582384); +#311453 = AXIS2_PLACEMENT_3D('',#311454,#311455,#311456); +#311454 = CARTESIAN_POINT('',(152.40000041761,-102.0711424433,0.)); +#311455 = DIRECTION('',(0.,0.,-1.)); +#311456 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311457 = CYLINDRICAL_SURFACE('',#311458,0.274999582384); +#311458 = AXIS2_PLACEMENT_3D('',#311459,#311460,#311461); +#311459 = CARTESIAN_POINT('',(152.40000041761,-102.0711424433,0.)); +#311460 = DIRECTION('',(-0.,-0.,1.)); +#311461 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311462 = ADVANCED_FACE('',(#311463),#311488,.F.); +#311463 = FACE_BOUND('',#311464,.F.); +#311464 = EDGE_LOOP('',(#311465,#311466,#311474,#311482)); +#311465 = ORIENTED_EDGE('',*,*,#311443,.T.); +#311466 = ORIENTED_EDGE('',*,*,#311467,.T.); +#311467 = EDGE_CURVE('',#311435,#311468,#311470,.T.); +#311468 = VERTEX_POINT('',#311469); +#311469 = CARTESIAN_POINT('',(152.5,-102.36005,-3.5E-02)); +#311470 = LINE('',#311471,#311472); +#311471 = CARTESIAN_POINT('',(152.594454,-102.265597,-3.5E-02)); +#311472 = VECTOR('',#311473,1.); +#311473 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311474 = ORIENTED_EDGE('',*,*,#311475,.F.); +#311475 = EDGE_CURVE('',#311476,#311468,#311478,.T.); +#311476 = VERTEX_POINT('',#311477); +#311477 = CARTESIAN_POINT('',(152.5,-102.36005,0.)); +#311478 = LINE('',#311479,#311480); +#311479 = CARTESIAN_POINT('',(152.5,-102.36005,0.)); +#311480 = VECTOR('',#311481,1.); +#311481 = DIRECTION('',(0.,0.,-1.)); +#311482 = ORIENTED_EDGE('',*,*,#311483,.F.); +#311483 = EDGE_CURVE('',#311444,#311476,#311484,.T.); +#311484 = LINE('',#311485,#311486); +#311485 = CARTESIAN_POINT('',(152.594454,-102.265597,0.)); +#311486 = VECTOR('',#311487,1.); +#311487 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311488 = PLANE('',#311489); +#311489 = AXIS2_PLACEMENT_3D('',#311490,#311491,#311492); +#311490 = CARTESIAN_POINT('',(152.594454,-102.265597,0.)); +#311491 = DIRECTION('',(-0.707103038029,0.707110524324,0.)); +#311492 = DIRECTION('',(-0.707110524324,-0.707103038029,0.)); +#311493 = ADVANCED_FACE('',(#311494),#311519,.F.); +#311494 = FACE_BOUND('',#311495,.F.); +#311495 = EDGE_LOOP('',(#311496,#311497,#311505,#311513)); +#311496 = ORIENTED_EDGE('',*,*,#311475,.T.); +#311497 = ORIENTED_EDGE('',*,*,#311498,.T.); +#311498 = EDGE_CURVE('',#311468,#311499,#311501,.T.); +#311499 = VERTEX_POINT('',#311500); +#311500 = CARTESIAN_POINT('',(152.5,-102.939949,-3.5E-02)); +#311501 = LINE('',#311502,#311503); +#311502 = CARTESIAN_POINT('',(152.5,-102.36005,-3.5E-02)); +#311503 = VECTOR('',#311504,1.); +#311504 = DIRECTION('',(0.,-1.,0.)); +#311505 = ORIENTED_EDGE('',*,*,#311506,.F.); +#311506 = EDGE_CURVE('',#311507,#311499,#311509,.T.); +#311507 = VERTEX_POINT('',#311508); +#311508 = CARTESIAN_POINT('',(152.5,-102.939949,0.)); +#311509 = LINE('',#311510,#311511); +#311510 = CARTESIAN_POINT('',(152.5,-102.939949,0.)); +#311511 = VECTOR('',#311512,1.); +#311512 = DIRECTION('',(0.,0.,-1.)); +#311513 = ORIENTED_EDGE('',*,*,#311514,.F.); +#311514 = EDGE_CURVE('',#311476,#311507,#311515,.T.); +#311515 = LINE('',#311516,#311517); +#311516 = CARTESIAN_POINT('',(152.5,-102.36005,0.)); +#311517 = VECTOR('',#311518,1.); +#311518 = DIRECTION('',(0.,-1.,0.)); +#311519 = PLANE('',#311520); +#311520 = AXIS2_PLACEMENT_3D('',#311521,#311522,#311523); +#311521 = CARTESIAN_POINT('',(152.5,-102.36005,0.)); +#311522 = DIRECTION('',(-1.,-0.,-0.)); +#311523 = DIRECTION('',(0.,-1.,0.)); +#311524 = ADVANCED_FACE('',(#311525),#311550,.F.); +#311525 = FACE_BOUND('',#311526,.F.); +#311526 = EDGE_LOOP('',(#311527,#311528,#311536,#311544)); +#311527 = ORIENTED_EDGE('',*,*,#311506,.T.); +#311528 = ORIENTED_EDGE('',*,*,#311529,.T.); +#311529 = EDGE_CURVE('',#311499,#311530,#311532,.T.); +#311530 = VERTEX_POINT('',#311531); +#311531 = CARTESIAN_POINT('',(152.594454,-103.034403,-3.5E-02)); +#311532 = LINE('',#311533,#311534); +#311533 = CARTESIAN_POINT('',(152.5,-102.939949,-3.5E-02)); +#311534 = VECTOR('',#311535,1.); +#311535 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311536 = ORIENTED_EDGE('',*,*,#311537,.F.); +#311537 = EDGE_CURVE('',#311538,#311530,#311540,.T.); +#311538 = VERTEX_POINT('',#311539); +#311539 = CARTESIAN_POINT('',(152.594454,-103.034403,0.)); +#311540 = LINE('',#311541,#311542); +#311541 = CARTESIAN_POINT('',(152.594454,-103.034403,0.)); +#311542 = VECTOR('',#311543,1.); +#311543 = DIRECTION('',(0.,0.,-1.)); +#311544 = ORIENTED_EDGE('',*,*,#311545,.F.); +#311545 = EDGE_CURVE('',#311507,#311538,#311546,.T.); +#311546 = LINE('',#311547,#311548); +#311547 = CARTESIAN_POINT('',(152.5,-102.939949,0.)); +#311548 = VECTOR('',#311549,1.); +#311549 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311550 = PLANE('',#311551); +#311551 = AXIS2_PLACEMENT_3D('',#311552,#311553,#311554); +#311552 = CARTESIAN_POINT('',(152.5,-102.939949,0.)); +#311553 = DIRECTION('',(-0.707106781186,-0.707106781187,-0.)); +#311554 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#311555 = ADVANCED_FACE('',(#311556),#311583,.T.); +#311556 = FACE_BOUND('',#311557,.F.); +#311557 = EDGE_LOOP('',(#311558,#311559,#311568,#311576)); +#311558 = ORIENTED_EDGE('',*,*,#311537,.T.); +#311559 = ORIENTED_EDGE('',*,*,#311560,.T.); +#311560 = EDGE_CURVE('',#311530,#311561,#311563,.T.); +#311561 = VERTEX_POINT('',#311562); +#311562 = CARTESIAN_POINT('',(152.675,-103.228858,-3.5E-02)); +#311563 = CIRCLE('',#311564,0.275002697077); +#311564 = AXIS2_PLACEMENT_3D('',#311565,#311566,#311567); +#311565 = CARTESIAN_POINT('',(152.39999730292,-103.2288588468,-3.5E-02) + ); +#311566 = DIRECTION('',(0.,0.,-1.)); +#311567 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311568 = ORIENTED_EDGE('',*,*,#311569,.F.); +#311569 = EDGE_CURVE('',#311570,#311561,#311572,.T.); +#311570 = VERTEX_POINT('',#311571); +#311571 = CARTESIAN_POINT('',(152.675,-103.228858,0.)); +#311572 = LINE('',#311573,#311574); +#311573 = CARTESIAN_POINT('',(152.675,-103.228858,0.)); +#311574 = VECTOR('',#311575,1.); +#311575 = DIRECTION('',(0.,0.,-1.)); +#311576 = ORIENTED_EDGE('',*,*,#311577,.F.); +#311577 = EDGE_CURVE('',#311538,#311570,#311578,.T.); +#311578 = CIRCLE('',#311579,0.275002697077); +#311579 = AXIS2_PLACEMENT_3D('',#311580,#311581,#311582); +#311580 = CARTESIAN_POINT('',(152.39999730292,-103.2288588468,0.)); +#311581 = DIRECTION('',(0.,0.,-1.)); +#311582 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311583 = CYLINDRICAL_SURFACE('',#311584,0.275002697077); +#311584 = AXIS2_PLACEMENT_3D('',#311585,#311586,#311587); +#311585 = CARTESIAN_POINT('',(152.39999730292,-103.2288588468,0.)); +#311586 = DIRECTION('',(-0.,-0.,1.)); +#311587 = DIRECTION('',(0.707108327091,0.707105235279,0.)); +#311588 = ADVANCED_FACE('',(#311589),#311614,.F.); +#311589 = FACE_BOUND('',#311590,.F.); +#311590 = EDGE_LOOP('',(#311591,#311592,#311600,#311608)); +#311591 = ORIENTED_EDGE('',*,*,#311569,.T.); +#311592 = ORIENTED_EDGE('',*,*,#311593,.T.); +#311593 = EDGE_CURVE('',#311561,#311594,#311596,.T.); +#311594 = VERTEX_POINT('',#311595); +#311595 = CARTESIAN_POINT('',(152.675,-107.1,-3.5E-02)); +#311596 = LINE('',#311597,#311598); +#311597 = CARTESIAN_POINT('',(152.675,-103.228858,-3.5E-02)); +#311598 = VECTOR('',#311599,1.); +#311599 = DIRECTION('',(0.,-1.,0.)); +#311600 = ORIENTED_EDGE('',*,*,#311601,.F.); +#311601 = EDGE_CURVE('',#311602,#311594,#311604,.T.); +#311602 = VERTEX_POINT('',#311603); +#311603 = CARTESIAN_POINT('',(152.675,-107.1,0.)); +#311604 = LINE('',#311605,#311606); +#311605 = CARTESIAN_POINT('',(152.675,-107.1,0.)); +#311606 = VECTOR('',#311607,1.); +#311607 = DIRECTION('',(0.,0.,-1.)); +#311608 = ORIENTED_EDGE('',*,*,#311609,.F.); +#311609 = EDGE_CURVE('',#311570,#311602,#311610,.T.); +#311610 = LINE('',#311611,#311612); +#311611 = CARTESIAN_POINT('',(152.675,-103.228858,0.)); +#311612 = VECTOR('',#311613,1.); +#311613 = DIRECTION('',(0.,-1.,0.)); +#311614 = PLANE('',#311615); +#311615 = AXIS2_PLACEMENT_3D('',#311616,#311617,#311618); +#311616 = CARTESIAN_POINT('',(152.675,-103.228858,0.)); +#311617 = DIRECTION('',(-1.,-0.,-0.)); +#311618 = DIRECTION('',(0.,-1.,0.)); +#311619 = ADVANCED_FACE('',(#311620),#311647,.T.); +#311620 = FACE_BOUND('',#311621,.F.); +#311621 = EDGE_LOOP('',(#311622,#311623,#311632,#311640)); +#311622 = ORIENTED_EDGE('',*,*,#311601,.T.); +#311623 = ORIENTED_EDGE('',*,*,#311624,.T.); +#311624 = EDGE_CURVE('',#311594,#311625,#311627,.T.); +#311625 = VERTEX_POINT('',#311626); +#311626 = CARTESIAN_POINT('',(152.594455,-107.294454,-3.5E-02)); +#311627 = CIRCLE('',#311628,0.275002749762); +#311628 = AXIS2_PLACEMENT_3D('',#311629,#311630,#311631); +#311629 = CARTESIAN_POINT('',(152.39999725023,-107.0999991313,-3.5E-02) + ); +#311630 = DIRECTION('',(0.,0.,-1.)); +#311631 = DIRECTION('',(0.999999999995,-3.158630338349E-06,0.)); +#311632 = ORIENTED_EDGE('',*,*,#311633,.F.); +#311633 = EDGE_CURVE('',#311634,#311625,#311636,.T.); +#311634 = VERTEX_POINT('',#311635); +#311635 = CARTESIAN_POINT('',(152.594455,-107.294454,0.)); +#311636 = LINE('',#311637,#311638); +#311637 = CARTESIAN_POINT('',(152.594455,-107.294454,0.)); +#311638 = VECTOR('',#311639,1.); +#311639 = DIRECTION('',(0.,0.,-1.)); +#311640 = ORIENTED_EDGE('',*,*,#311641,.F.); +#311641 = EDGE_CURVE('',#311602,#311634,#311642,.T.); +#311642 = CIRCLE('',#311643,0.275002749762); +#311643 = AXIS2_PLACEMENT_3D('',#311644,#311645,#311646); +#311644 = CARTESIAN_POINT('',(152.39999725023,-107.0999991313,0.)); +#311645 = DIRECTION('',(0.,0.,-1.)); +#311646 = DIRECTION('',(0.999999999995,-3.158630338349E-06,0.)); +#311647 = CYLINDRICAL_SURFACE('',#311648,0.275002749762); +#311648 = AXIS2_PLACEMENT_3D('',#311649,#311650,#311651); +#311649 = CARTESIAN_POINT('',(152.39999725023,-107.0999991313,0.)); +#311650 = DIRECTION('',(-0.,-0.,1.)); +#311651 = DIRECTION('',(0.999999999995,-3.158630338349E-06,0.)); +#311652 = ADVANCED_FACE('',(#311653),#311678,.F.); +#311653 = FACE_BOUND('',#311654,.F.); +#311654 = EDGE_LOOP('',(#311655,#311656,#311664,#311672)); +#311655 = ORIENTED_EDGE('',*,*,#311633,.T.); +#311656 = ORIENTED_EDGE('',*,*,#311657,.T.); +#311657 = EDGE_CURVE('',#311625,#311658,#311660,.T.); +#311658 = VERTEX_POINT('',#311659); +#311659 = CARTESIAN_POINT('',(141.275,-118.613908,-3.5E-02)); +#311660 = LINE('',#311661,#311662); +#311661 = CARTESIAN_POINT('',(152.594455,-107.294454,-3.5E-02)); +#311662 = VECTOR('',#311663,1.); +#311663 = DIRECTION('',(-0.707106812421,-0.707106749952,0.)); +#311664 = ORIENTED_EDGE('',*,*,#311665,.F.); +#311665 = EDGE_CURVE('',#311666,#311658,#311668,.T.); +#311666 = VERTEX_POINT('',#311667); +#311667 = CARTESIAN_POINT('',(141.275,-118.613908,0.)); +#311668 = LINE('',#311669,#311670); +#311669 = CARTESIAN_POINT('',(141.275,-118.613908,0.)); +#311670 = VECTOR('',#311671,1.); +#311671 = DIRECTION('',(0.,0.,-1.)); +#311672 = ORIENTED_EDGE('',*,*,#311673,.F.); +#311673 = EDGE_CURVE('',#311634,#311666,#311674,.T.); +#311674 = LINE('',#311675,#311676); +#311675 = CARTESIAN_POINT('',(152.594455,-107.294454,0.)); +#311676 = VECTOR('',#311677,1.); +#311677 = DIRECTION('',(-0.707106812421,-0.707106749952,0.)); +#311678 = PLANE('',#311679); +#311679 = AXIS2_PLACEMENT_3D('',#311680,#311681,#311682); +#311680 = CARTESIAN_POINT('',(152.594455,-107.294454,0.)); +#311681 = DIRECTION('',(-0.707106749952,0.707106812421,0.)); +#311682 = DIRECTION('',(-0.707106812421,-0.707106749952,0.)); +#311683 = ADVANCED_FACE('',(#311684),#311709,.F.); +#311684 = FACE_BOUND('',#311685,.F.); +#311685 = EDGE_LOOP('',(#311686,#311687,#311695,#311703)); +#311686 = ORIENTED_EDGE('',*,*,#311665,.T.); +#311687 = ORIENTED_EDGE('',*,*,#311688,.T.); +#311688 = EDGE_CURVE('',#311658,#311689,#311691,.T.); +#311689 = VERTEX_POINT('',#311690); +#311690 = CARTESIAN_POINT('',(141.275,-119.5,-3.5E-02)); +#311691 = LINE('',#311692,#311693); +#311692 = CARTESIAN_POINT('',(141.275,-118.613908,-3.5E-02)); +#311693 = VECTOR('',#311694,1.); +#311694 = DIRECTION('',(0.,-1.,0.)); +#311695 = ORIENTED_EDGE('',*,*,#311696,.F.); +#311696 = EDGE_CURVE('',#311697,#311689,#311699,.T.); +#311697 = VERTEX_POINT('',#311698); +#311698 = CARTESIAN_POINT('',(141.275,-119.5,0.)); +#311699 = LINE('',#311700,#311701); +#311700 = CARTESIAN_POINT('',(141.275,-119.5,0.)); +#311701 = VECTOR('',#311702,1.); +#311702 = DIRECTION('',(0.,0.,-1.)); +#311703 = ORIENTED_EDGE('',*,*,#311704,.F.); +#311704 = EDGE_CURVE('',#311666,#311697,#311705,.T.); +#311705 = LINE('',#311706,#311707); +#311706 = CARTESIAN_POINT('',(141.275,-118.613908,0.)); +#311707 = VECTOR('',#311708,1.); +#311708 = DIRECTION('',(0.,-1.,0.)); +#311709 = PLANE('',#311710); +#311710 = AXIS2_PLACEMENT_3D('',#311711,#311712,#311713); +#311711 = CARTESIAN_POINT('',(141.275,-118.613908,0.)); +#311712 = DIRECTION('',(-1.,-0.,-0.)); +#311713 = DIRECTION('',(0.,-1.,0.)); +#311714 = ADVANCED_FACE('',(#311715),#311742,.T.); +#311715 = FACE_BOUND('',#311716,.F.); +#311716 = EDGE_LOOP('',(#311717,#311718,#311727,#311735)); +#311717 = ORIENTED_EDGE('',*,*,#311696,.T.); +#311718 = ORIENTED_EDGE('',*,*,#311719,.T.); +#311719 = EDGE_CURVE('',#311689,#311720,#311722,.T.); +#311720 = VERTEX_POINT('',#311721); +#311721 = CARTESIAN_POINT('',(141.,-119.775,-3.5E-02)); +#311722 = CIRCLE('',#311723,0.275000041151); +#311723 = AXIS2_PLACEMENT_3D('',#311724,#311725,#311726); +#311724 = CARTESIAN_POINT('',(140.99999995884,-119.4999999588,-3.5E-02) + ); +#311725 = DIRECTION('',(0.,0.,-1.)); +#311726 = DIRECTION('',(1.,-1.496417246818E-07,0.)); +#311727 = ORIENTED_EDGE('',*,*,#311728,.F.); +#311728 = EDGE_CURVE('',#311729,#311720,#311731,.T.); +#311729 = VERTEX_POINT('',#311730); +#311730 = CARTESIAN_POINT('',(141.,-119.775,0.)); +#311731 = LINE('',#311732,#311733); +#311732 = CARTESIAN_POINT('',(141.,-119.775,0.)); +#311733 = VECTOR('',#311734,1.); +#311734 = DIRECTION('',(0.,0.,-1.)); +#311735 = ORIENTED_EDGE('',*,*,#311736,.F.); +#311736 = EDGE_CURVE('',#311697,#311729,#311737,.T.); +#311737 = CIRCLE('',#311738,0.275000041151); +#311738 = AXIS2_PLACEMENT_3D('',#311739,#311740,#311741); +#311739 = CARTESIAN_POINT('',(140.99999995884,-119.4999999588,0.)); +#311740 = DIRECTION('',(0.,0.,-1.)); +#311741 = DIRECTION('',(1.,-1.496417246818E-07,0.)); +#311742 = CYLINDRICAL_SURFACE('',#311743,0.275000041151); +#311743 = AXIS2_PLACEMENT_3D('',#311744,#311745,#311746); +#311744 = CARTESIAN_POINT('',(140.99999995884,-119.4999999588,0.)); +#311745 = DIRECTION('',(-0.,-0.,1.)); +#311746 = DIRECTION('',(1.,-1.496417246818E-07,0.)); +#311747 = ADVANCED_FACE('',(#311748),#311773,.F.); +#311748 = FACE_BOUND('',#311749,.F.); +#311749 = EDGE_LOOP('',(#311750,#311751,#311759,#311767)); +#311750 = ORIENTED_EDGE('',*,*,#311728,.T.); +#311751 = ORIENTED_EDGE('',*,*,#311752,.T.); +#311752 = EDGE_CURVE('',#311720,#311753,#311755,.T.); +#311753 = VERTEX_POINT('',#311754); +#311754 = CARTESIAN_POINT('',(140.567893,-119.775,-3.5E-02)); +#311755 = LINE('',#311756,#311757); +#311756 = CARTESIAN_POINT('',(141.,-119.775,-3.5E-02)); +#311757 = VECTOR('',#311758,1.); +#311758 = DIRECTION('',(-1.,0.,0.)); +#311759 = ORIENTED_EDGE('',*,*,#311760,.F.); +#311760 = EDGE_CURVE('',#311761,#311753,#311763,.T.); +#311761 = VERTEX_POINT('',#311762); +#311762 = CARTESIAN_POINT('',(140.567893,-119.775,0.)); +#311763 = LINE('',#311764,#311765); +#311764 = CARTESIAN_POINT('',(140.567893,-119.775,0.)); +#311765 = VECTOR('',#311766,1.); +#311766 = DIRECTION('',(0.,0.,-1.)); +#311767 = ORIENTED_EDGE('',*,*,#311768,.F.); +#311768 = EDGE_CURVE('',#311729,#311761,#311769,.T.); +#311769 = LINE('',#311770,#311771); +#311770 = CARTESIAN_POINT('',(141.,-119.775,0.)); +#311771 = VECTOR('',#311772,1.); +#311772 = DIRECTION('',(-1.,0.,0.)); +#311773 = PLANE('',#311774); +#311774 = AXIS2_PLACEMENT_3D('',#311775,#311776,#311777); +#311775 = CARTESIAN_POINT('',(141.,-119.775,0.)); +#311776 = DIRECTION('',(0.,1.,0.)); +#311777 = DIRECTION('',(-1.,0.,0.)); +#311778 = ADVANCED_FACE('',(#311779),#311804,.F.); +#311779 = FACE_BOUND('',#311780,.F.); +#311780 = EDGE_LOOP('',(#311781,#311782,#311790,#311798)); +#311781 = ORIENTED_EDGE('',*,*,#311760,.T.); +#311782 = ORIENTED_EDGE('',*,*,#311783,.T.); +#311783 = EDGE_CURVE('',#311753,#311784,#311786,.T.); +#311784 = VERTEX_POINT('',#311785); +#311785 = CARTESIAN_POINT('',(140.55,-119.792892,-3.5E-02)); +#311786 = LINE('',#311787,#311788); +#311787 = CARTESIAN_POINT('',(140.567893,-119.775,-3.5E-02)); +#311788 = VECTOR('',#311789,1.); +#311789 = DIRECTION('',(-0.707126540776,-0.707087021045,0.)); +#311790 = ORIENTED_EDGE('',*,*,#311791,.F.); +#311791 = EDGE_CURVE('',#311792,#311784,#311794,.T.); +#311792 = VERTEX_POINT('',#311793); +#311793 = CARTESIAN_POINT('',(140.55,-119.792892,0.)); +#311794 = LINE('',#311795,#311796); +#311795 = CARTESIAN_POINT('',(140.55,-119.792892,0.)); +#311796 = VECTOR('',#311797,1.); +#311797 = DIRECTION('',(0.,0.,-1.)); +#311798 = ORIENTED_EDGE('',*,*,#311799,.F.); +#311799 = EDGE_CURVE('',#311761,#311792,#311800,.T.); +#311800 = LINE('',#311801,#311802); +#311801 = CARTESIAN_POINT('',(140.567893,-119.775,0.)); +#311802 = VECTOR('',#311803,1.); +#311803 = DIRECTION('',(-0.707126540776,-0.707087021045,0.)); +#311804 = PLANE('',#311805); +#311805 = AXIS2_PLACEMENT_3D('',#311806,#311807,#311808); +#311806 = CARTESIAN_POINT('',(140.567893,-119.775,0.)); +#311807 = DIRECTION('',(-0.707087021045,0.707126540776,0.)); +#311808 = DIRECTION('',(-0.707126540776,-0.707087021045,0.)); +#311809 = ADVANCED_FACE('',(#311810),#311835,.F.); +#311810 = FACE_BOUND('',#311811,.F.); +#311811 = EDGE_LOOP('',(#311812,#311813,#311821,#311829)); +#311812 = ORIENTED_EDGE('',*,*,#311791,.T.); +#311813 = ORIENTED_EDGE('',*,*,#311814,.T.); +#311814 = EDGE_CURVE('',#311784,#311815,#311817,.T.); +#311815 = VERTEX_POINT('',#311816); +#311816 = CARTESIAN_POINT('',(140.55,-120.321016,-3.5E-02)); +#311817 = LINE('',#311818,#311819); +#311818 = CARTESIAN_POINT('',(140.55,-119.792892,-3.5E-02)); +#311819 = VECTOR('',#311820,1.); +#311820 = DIRECTION('',(0.,-1.,0.)); +#311821 = ORIENTED_EDGE('',*,*,#311822,.F.); +#311822 = EDGE_CURVE('',#311823,#311815,#311825,.T.); +#311823 = VERTEX_POINT('',#311824); +#311824 = CARTESIAN_POINT('',(140.55,-120.321016,0.)); +#311825 = LINE('',#311826,#311827); +#311826 = CARTESIAN_POINT('',(140.55,-120.321016,0.)); +#311827 = VECTOR('',#311828,1.); +#311828 = DIRECTION('',(0.,0.,-1.)); +#311829 = ORIENTED_EDGE('',*,*,#311830,.F.); +#311830 = EDGE_CURVE('',#311792,#311823,#311831,.T.); +#311831 = LINE('',#311832,#311833); +#311832 = CARTESIAN_POINT('',(140.55,-119.792892,0.)); +#311833 = VECTOR('',#311834,1.); +#311834 = DIRECTION('',(0.,-1.,0.)); +#311835 = PLANE('',#311836); +#311836 = AXIS2_PLACEMENT_3D('',#311837,#311838,#311839); +#311837 = CARTESIAN_POINT('',(140.55,-119.792892,0.)); +#311838 = DIRECTION('',(-1.,-0.,-0.)); +#311839 = DIRECTION('',(0.,-1.,0.)); +#311840 = ADVANCED_FACE('',(#311841),#311868,.T.); +#311841 = FACE_BOUND('',#311842,.F.); +#311842 = EDGE_LOOP('',(#311843,#311844,#311853,#311861)); +#311843 = ORIENTED_EDGE('',*,*,#311822,.T.); +#311844 = ORIENTED_EDGE('',*,*,#311845,.T.); +#311845 = EDGE_CURVE('',#311815,#311846,#311848,.T.); +#311846 = VERTEX_POINT('',#311847); +#311847 = CARTESIAN_POINT('',(140.469454,-120.515471,-3.5E-02)); +#311848 = CIRCLE('',#311849,0.274999582384); +#311849 = AXIS2_PLACEMENT_3D('',#311850,#311851,#311852); +#311850 = CARTESIAN_POINT('',(140.27500041761,-120.3210164433,-3.5E-02) + ); +#311851 = DIRECTION('',(0.,0.,-1.)); +#311852 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311853 = ORIENTED_EDGE('',*,*,#311854,.F.); +#311854 = EDGE_CURVE('',#311855,#311846,#311857,.T.); +#311855 = VERTEX_POINT('',#311856); +#311856 = CARTESIAN_POINT('',(140.469454,-120.515471,0.)); +#311857 = LINE('',#311858,#311859); +#311858 = CARTESIAN_POINT('',(140.469454,-120.515471,0.)); +#311859 = VECTOR('',#311860,1.); +#311860 = DIRECTION('',(0.,0.,-1.)); +#311861 = ORIENTED_EDGE('',*,*,#311862,.F.); +#311862 = EDGE_CURVE('',#311823,#311855,#311863,.T.); +#311863 = CIRCLE('',#311864,0.274999582384); +#311864 = AXIS2_PLACEMENT_3D('',#311865,#311866,#311867); +#311865 = CARTESIAN_POINT('',(140.27500041761,-120.3210164433,0.)); +#311866 = DIRECTION('',(0.,0.,-1.)); +#311867 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311868 = CYLINDRICAL_SURFACE('',#311869,0.274999582384); +#311869 = AXIS2_PLACEMENT_3D('',#311870,#311871,#311872); +#311870 = CARTESIAN_POINT('',(140.27500041761,-120.3210164433,0.)); +#311871 = DIRECTION('',(-0.,-0.,1.)); +#311872 = DIRECTION('',(0.999999999999,1.612113277637E-06,0.)); +#311873 = ADVANCED_FACE('',(#311874),#311899,.F.); +#311874 = FACE_BOUND('',#311875,.F.); +#311875 = EDGE_LOOP('',(#311876,#311877,#311885,#311893)); +#311876 = ORIENTED_EDGE('',*,*,#311854,.T.); +#311877 = ORIENTED_EDGE('',*,*,#311878,.T.); +#311878 = EDGE_CURVE('',#311846,#311879,#311881,.T.); +#311879 = VERTEX_POINT('',#311880); +#311880 = CARTESIAN_POINT('',(140.01547,-120.969454,-3.5E-02)); +#311881 = LINE('',#311882,#311883); +#311882 = CARTESIAN_POINT('',(140.469454,-120.515471,-3.5E-02)); +#311883 = VECTOR('',#311884,1.); +#311884 = DIRECTION('',(-0.707107559966,-0.707106002406,0.)); +#311885 = ORIENTED_EDGE('',*,*,#311886,.F.); +#311886 = EDGE_CURVE('',#311887,#311879,#311889,.T.); +#311887 = VERTEX_POINT('',#311888); +#311888 = CARTESIAN_POINT('',(140.01547,-120.969454,0.)); +#311889 = LINE('',#311890,#311891); +#311890 = CARTESIAN_POINT('',(140.01547,-120.969454,0.)); +#311891 = VECTOR('',#311892,1.); +#311892 = DIRECTION('',(0.,0.,-1.)); +#311893 = ORIENTED_EDGE('',*,*,#311894,.F.); +#311894 = EDGE_CURVE('',#311855,#311887,#311895,.T.); +#311895 = LINE('',#311896,#311897); +#311896 = CARTESIAN_POINT('',(140.469454,-120.515471,0.)); +#311897 = VECTOR('',#311898,1.); +#311898 = DIRECTION('',(-0.707107559966,-0.707106002406,0.)); +#311899 = PLANE('',#311900); +#311900 = AXIS2_PLACEMENT_3D('',#311901,#311902,#311903); +#311901 = CARTESIAN_POINT('',(140.469454,-120.515471,0.)); +#311902 = DIRECTION('',(-0.707106002406,0.707107559966,0.)); +#311903 = DIRECTION('',(-0.707107559966,-0.707106002406,0.)); +#311904 = ADVANCED_FACE('',(#311905),#311932,.T.); +#311905 = FACE_BOUND('',#311906,.F.); +#311906 = EDGE_LOOP('',(#311907,#311908,#311917,#311925)); +#311907 = ORIENTED_EDGE('',*,*,#311886,.T.); +#311908 = ORIENTED_EDGE('',*,*,#311909,.T.); +#311909 = EDGE_CURVE('',#311879,#311910,#311912,.T.); +#311910 = VERTEX_POINT('',#311911); +#311911 = CARTESIAN_POINT('',(139.821016,-121.05,-3.5E-02)); +#311912 = CIRCLE('',#311913,0.274993677363); +#311913 = AXIS2_PLACEMENT_3D('',#311914,#311915,#311916); +#311914 = CARTESIAN_POINT('',(139.82101788928,-120.7750063226,-3.5E-02) + ); +#311915 = DIRECTION('',(0.,0.,-1.)); +#311916 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#311917 = ORIENTED_EDGE('',*,*,#311918,.F.); +#311918 = EDGE_CURVE('',#311919,#311910,#311921,.T.); +#311919 = VERTEX_POINT('',#311920); +#311920 = CARTESIAN_POINT('',(139.821016,-121.05,0.)); +#311921 = LINE('',#311922,#311923); +#311922 = CARTESIAN_POINT('',(139.821016,-121.05,0.)); +#311923 = VECTOR('',#311924,1.); +#311924 = DIRECTION('',(0.,0.,-1.)); +#311925 = ORIENTED_EDGE('',*,*,#311926,.F.); +#311926 = EDGE_CURVE('',#311887,#311919,#311927,.T.); +#311927 = CIRCLE('',#311928,0.274993677363); +#311928 = AXIS2_PLACEMENT_3D('',#311929,#311930,#311931); +#311929 = CARTESIAN_POINT('',(139.82101788928,-120.7750063226,0.)); +#311930 = DIRECTION('',(0.,0.,-1.)); +#311931 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#311932 = CYLINDRICAL_SURFACE('',#311933,0.274993677363); +#311933 = AXIS2_PLACEMENT_3D('',#311934,#311935,#311936); +#311934 = CARTESIAN_POINT('',(139.82101788928,-120.7750063226,0.)); +#311935 = DIRECTION('',(-0.,-0.,1.)); +#311936 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#311937 = ADVANCED_FACE('',(#311938),#311963,.F.); +#311938 = FACE_BOUND('',#311939,.F.); +#311939 = EDGE_LOOP('',(#311940,#311941,#311949,#311957)); +#311940 = ORIENTED_EDGE('',*,*,#311918,.T.); +#311941 = ORIENTED_EDGE('',*,*,#311942,.T.); +#311942 = EDGE_CURVE('',#311910,#311943,#311945,.T.); +#311943 = VERTEX_POINT('',#311944); +#311944 = CARTESIAN_POINT('',(139.722792,-121.05,-3.5E-02)); +#311945 = LINE('',#311946,#311947); +#311946 = CARTESIAN_POINT('',(139.821016,-121.05,-3.5E-02)); +#311947 = VECTOR('',#311948,1.); +#311948 = DIRECTION('',(-1.,0.,0.)); +#311949 = ORIENTED_EDGE('',*,*,#311950,.F.); +#311950 = EDGE_CURVE('',#311951,#311943,#311953,.T.); +#311951 = VERTEX_POINT('',#311952); +#311952 = CARTESIAN_POINT('',(139.722792,-121.05,0.)); +#311953 = LINE('',#311954,#311955); +#311954 = CARTESIAN_POINT('',(139.722792,-121.05,0.)); +#311955 = VECTOR('',#311956,1.); +#311956 = DIRECTION('',(0.,0.,-1.)); +#311957 = ORIENTED_EDGE('',*,*,#311958,.F.); +#311958 = EDGE_CURVE('',#311919,#311951,#311959,.T.); +#311959 = LINE('',#311960,#311961); +#311960 = CARTESIAN_POINT('',(139.821016,-121.05,0.)); +#311961 = VECTOR('',#311962,1.); +#311962 = DIRECTION('',(-1.,0.,0.)); +#311963 = PLANE('',#311964); +#311964 = AXIS2_PLACEMENT_3D('',#311965,#311966,#311967); +#311965 = CARTESIAN_POINT('',(139.821016,-121.05,0.)); +#311966 = DIRECTION('',(0.,1.,0.)); +#311967 = DIRECTION('',(-1.,0.,0.)); +#311968 = ADVANCED_FACE('',(#311969),#311994,.F.); +#311969 = FACE_BOUND('',#311970,.F.); +#311970 = EDGE_LOOP('',(#311971,#311972,#311980,#311988)); +#311971 = ORIENTED_EDGE('',*,*,#311950,.T.); +#311972 = ORIENTED_EDGE('',*,*,#311973,.T.); +#311973 = EDGE_CURVE('',#311943,#311974,#311976,.T.); +#311974 = VERTEX_POINT('',#311975); +#311975 = CARTESIAN_POINT('',(139.65,-121.122792,-3.5E-02)); +#311976 = LINE('',#311977,#311978); +#311977 = CARTESIAN_POINT('',(139.722792,-121.05,-3.5E-02)); +#311978 = VECTOR('',#311979,1.); +#311979 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#311980 = ORIENTED_EDGE('',*,*,#311981,.F.); +#311981 = EDGE_CURVE('',#311982,#311974,#311984,.T.); +#311982 = VERTEX_POINT('',#311983); +#311983 = CARTESIAN_POINT('',(139.65,-121.122792,0.)); +#311984 = LINE('',#311985,#311986); +#311985 = CARTESIAN_POINT('',(139.65,-121.122792,0.)); +#311986 = VECTOR('',#311987,1.); +#311987 = DIRECTION('',(0.,0.,-1.)); +#311988 = ORIENTED_EDGE('',*,*,#311989,.F.); +#311989 = EDGE_CURVE('',#311951,#311982,#311990,.T.); +#311990 = LINE('',#311991,#311992); +#311991 = CARTESIAN_POINT('',(139.722792,-121.05,0.)); +#311992 = VECTOR('',#311993,1.); +#311993 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#311994 = PLANE('',#311995); +#311995 = AXIS2_PLACEMENT_3D('',#311996,#311997,#311998); +#311996 = CARTESIAN_POINT('',(139.722792,-121.05,0.)); +#311997 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#311998 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#311999 = ADVANCED_FACE('',(#312000),#312025,.F.); +#312000 = FACE_BOUND('',#312001,.F.); +#312001 = EDGE_LOOP('',(#312002,#312003,#312011,#312019)); +#312002 = ORIENTED_EDGE('',*,*,#311981,.T.); +#312003 = ORIENTED_EDGE('',*,*,#312004,.T.); +#312004 = EDGE_CURVE('',#311974,#312005,#312007,.T.); +#312005 = VERTEX_POINT('',#312006); +#312006 = CARTESIAN_POINT('',(139.65,-121.282232,-3.5E-02)); +#312007 = LINE('',#312008,#312009); +#312008 = CARTESIAN_POINT('',(139.65,-121.122792,-3.5E-02)); +#312009 = VECTOR('',#312010,1.); +#312010 = DIRECTION('',(0.,-1.,0.)); +#312011 = ORIENTED_EDGE('',*,*,#312012,.F.); +#312012 = EDGE_CURVE('',#312013,#312005,#312015,.T.); +#312013 = VERTEX_POINT('',#312014); +#312014 = CARTESIAN_POINT('',(139.65,-121.282232,0.)); +#312015 = LINE('',#312016,#312017); +#312016 = CARTESIAN_POINT('',(139.65,-121.282232,0.)); +#312017 = VECTOR('',#312018,1.); +#312018 = DIRECTION('',(0.,0.,-1.)); +#312019 = ORIENTED_EDGE('',*,*,#312020,.F.); +#312020 = EDGE_CURVE('',#311982,#312013,#312021,.T.); +#312021 = LINE('',#312022,#312023); +#312022 = CARTESIAN_POINT('',(139.65,-121.122792,0.)); +#312023 = VECTOR('',#312024,1.); +#312024 = DIRECTION('',(0.,-1.,0.)); +#312025 = PLANE('',#312026); +#312026 = AXIS2_PLACEMENT_3D('',#312027,#312028,#312029); +#312027 = CARTESIAN_POINT('',(139.65,-121.122792,0.)); +#312028 = DIRECTION('',(-1.,-0.,-0.)); +#312029 = DIRECTION('',(0.,-1.,0.)); +#312030 = ADVANCED_FACE('',(#312031),#312058,.T.); +#312031 = FACE_BOUND('',#312032,.F.); +#312032 = EDGE_LOOP('',(#312033,#312034,#312043,#312051)); +#312033 = ORIENTED_EDGE('',*,*,#312012,.T.); +#312034 = ORIENTED_EDGE('',*,*,#312035,.T.); +#312035 = EDGE_CURVE('',#312005,#312036,#312038,.T.); +#312036 = VERTEX_POINT('',#312037); +#312037 = CARTESIAN_POINT('',(139.569454,-121.476686,-3.5E-02)); +#312038 = CIRCLE('',#312039,0.27499641508); +#312039 = AXIS2_PLACEMENT_3D('',#312040,#312041,#312042); +#312040 = CARTESIAN_POINT('',(139.37500358492,-121.2822327552,-3.5E-02) + ); +#312041 = DIRECTION('',(0.,0.,-1.)); +#312042 = DIRECTION('',(0.999999999996,2.746504701594E-06,0.)); +#312043 = ORIENTED_EDGE('',*,*,#312044,.F.); +#312044 = EDGE_CURVE('',#312045,#312036,#312047,.T.); +#312045 = VERTEX_POINT('',#312046); +#312046 = CARTESIAN_POINT('',(139.569454,-121.476686,0.)); +#312047 = LINE('',#312048,#312049); +#312048 = CARTESIAN_POINT('',(139.569454,-121.476686,0.)); +#312049 = VECTOR('',#312050,1.); +#312050 = DIRECTION('',(0.,0.,-1.)); +#312051 = ORIENTED_EDGE('',*,*,#312052,.F.); +#312052 = EDGE_CURVE('',#312013,#312045,#312053,.T.); +#312053 = CIRCLE('',#312054,0.27499641508); +#312054 = AXIS2_PLACEMENT_3D('',#312055,#312056,#312057); +#312055 = CARTESIAN_POINT('',(139.37500358492,-121.2822327552,0.)); +#312056 = DIRECTION('',(0.,0.,-1.)); +#312057 = DIRECTION('',(0.999999999996,2.746504701594E-06,0.)); +#312058 = CYLINDRICAL_SURFACE('',#312059,0.27499641508); +#312059 = AXIS2_PLACEMENT_3D('',#312060,#312061,#312062); +#312060 = CARTESIAN_POINT('',(139.37500358492,-121.2822327552,0.)); +#312061 = DIRECTION('',(-0.,-0.,1.)); +#312062 = DIRECTION('',(0.999999999996,2.746504701594E-06,0.)); +#312063 = ADVANCED_FACE('',(#312064),#312089,.F.); +#312064 = FACE_BOUND('',#312065,.F.); +#312065 = EDGE_LOOP('',(#312066,#312067,#312075,#312083)); +#312066 = ORIENTED_EDGE('',*,*,#312044,.T.); +#312067 = ORIENTED_EDGE('',*,*,#312068,.T.); +#312068 = EDGE_CURVE('',#312036,#312069,#312071,.T.); +#312069 = VERTEX_POINT('',#312070); +#312070 = CARTESIAN_POINT('',(139.151686,-121.894454,-3.5E-02)); +#312071 = LINE('',#312072,#312073); +#312072 = CARTESIAN_POINT('',(139.569454,-121.476686,-3.5E-02)); +#312073 = VECTOR('',#312074,1.); +#312074 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#312075 = ORIENTED_EDGE('',*,*,#312076,.F.); +#312076 = EDGE_CURVE('',#312077,#312069,#312079,.T.); +#312077 = VERTEX_POINT('',#312078); +#312078 = CARTESIAN_POINT('',(139.151686,-121.894454,0.)); +#312079 = LINE('',#312080,#312081); +#312080 = CARTESIAN_POINT('',(139.151686,-121.894454,0.)); +#312081 = VECTOR('',#312082,1.); +#312082 = DIRECTION('',(0.,0.,-1.)); +#312083 = ORIENTED_EDGE('',*,*,#312084,.F.); +#312084 = EDGE_CURVE('',#312045,#312077,#312085,.T.); +#312085 = LINE('',#312086,#312087); +#312086 = CARTESIAN_POINT('',(139.569454,-121.476686,0.)); +#312087 = VECTOR('',#312088,1.); +#312088 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#312089 = PLANE('',#312090); +#312090 = AXIS2_PLACEMENT_3D('',#312091,#312092,#312093); +#312091 = CARTESIAN_POINT('',(139.569454,-121.476686,0.)); +#312092 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#312093 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#312094 = ADVANCED_FACE('',(#312095),#312122,.T.); +#312095 = FACE_BOUND('',#312096,.F.); +#312096 = EDGE_LOOP('',(#312097,#312098,#312107,#312115)); +#312097 = ORIENTED_EDGE('',*,*,#312076,.T.); +#312098 = ORIENTED_EDGE('',*,*,#312099,.T.); +#312099 = EDGE_CURVE('',#312069,#312100,#312102,.T.); +#312100 = VERTEX_POINT('',#312101); +#312101 = CARTESIAN_POINT('',(138.957232,-121.975,-3.5E-02)); +#312102 = CIRCLE('',#312103,0.274993677363); +#312103 = AXIS2_PLACEMENT_3D('',#312104,#312105,#312106); +#312104 = CARTESIAN_POINT('',(138.95723388928,-121.7000063226,-3.5E-02) + ); +#312105 = DIRECTION('',(0.,0.,-1.)); +#312106 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#312107 = ORIENTED_EDGE('',*,*,#312108,.F.); +#312108 = EDGE_CURVE('',#312109,#312100,#312111,.T.); +#312109 = VERTEX_POINT('',#312110); +#312110 = CARTESIAN_POINT('',(138.957232,-121.975,0.)); +#312111 = LINE('',#312112,#312113); +#312112 = CARTESIAN_POINT('',(138.957232,-121.975,0.)); +#312113 = VECTOR('',#312114,1.); +#312114 = DIRECTION('',(0.,0.,-1.)); +#312115 = ORIENTED_EDGE('',*,*,#312116,.F.); +#312116 = EDGE_CURVE('',#312077,#312109,#312117,.T.); +#312117 = CIRCLE('',#312118,0.274993677363); +#312118 = AXIS2_PLACEMENT_3D('',#312119,#312120,#312121); +#312119 = CARTESIAN_POINT('',(138.95723388928,-121.7000063226,0.)); +#312120 = DIRECTION('',(0.,0.,-1.)); +#312121 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#312122 = CYLINDRICAL_SURFACE('',#312123,0.274993677363); +#312123 = AXIS2_PLACEMENT_3D('',#312124,#312125,#312126); +#312124 = CARTESIAN_POINT('',(138.95723388928,-121.7000063226,0.)); +#312125 = DIRECTION('',(-0.,-0.,1.)); +#312126 = DIRECTION('',(0.707114841972,-0.707098720309,0.)); +#312127 = ADVANCED_FACE('',(#312128),#312153,.F.); +#312128 = FACE_BOUND('',#312129,.F.); +#312129 = EDGE_LOOP('',(#312130,#312131,#312139,#312147)); +#312130 = ORIENTED_EDGE('',*,*,#312108,.T.); +#312131 = ORIENTED_EDGE('',*,*,#312132,.T.); +#312132 = EDGE_CURVE('',#312100,#312133,#312135,.T.); +#312133 = VERTEX_POINT('',#312134); +#312134 = CARTESIAN_POINT('',(137.7,-121.975,-3.5E-02)); +#312135 = LINE('',#312136,#312137); +#312136 = CARTESIAN_POINT('',(138.957232,-121.975,-3.5E-02)); +#312137 = VECTOR('',#312138,1.); +#312138 = DIRECTION('',(-1.,0.,0.)); +#312139 = ORIENTED_EDGE('',*,*,#312140,.F.); +#312140 = EDGE_CURVE('',#312141,#312133,#312143,.T.); +#312141 = VERTEX_POINT('',#312142); +#312142 = CARTESIAN_POINT('',(137.7,-121.975,0.)); +#312143 = LINE('',#312144,#312145); +#312144 = CARTESIAN_POINT('',(137.7,-121.975,0.)); +#312145 = VECTOR('',#312146,1.); +#312146 = DIRECTION('',(0.,0.,-1.)); +#312147 = ORIENTED_EDGE('',*,*,#312148,.F.); +#312148 = EDGE_CURVE('',#312109,#312141,#312149,.T.); +#312149 = LINE('',#312150,#312151); +#312150 = CARTESIAN_POINT('',(138.957232,-121.975,0.)); +#312151 = VECTOR('',#312152,1.); +#312152 = DIRECTION('',(-1.,0.,0.)); +#312153 = PLANE('',#312154); +#312154 = AXIS2_PLACEMENT_3D('',#312155,#312156,#312157); +#312155 = CARTESIAN_POINT('',(138.957232,-121.975,0.)); +#312156 = DIRECTION('',(0.,1.,0.)); +#312157 = DIRECTION('',(-1.,0.,0.)); +#312158 = ADVANCED_FACE('',(#312159),#312186,.T.); +#312159 = FACE_BOUND('',#312160,.F.); +#312160 = EDGE_LOOP('',(#312161,#312162,#312171,#312179)); +#312161 = ORIENTED_EDGE('',*,*,#312140,.T.); +#312162 = ORIENTED_EDGE('',*,*,#312163,.T.); +#312163 = EDGE_CURVE('',#312133,#312164,#312166,.T.); +#312164 = VERTEX_POINT('',#312165); +#312165 = CARTESIAN_POINT('',(137.505545,-121.894454,-3.5E-02)); +#312166 = CIRCLE('',#312167,0.274999582384); +#312167 = AXIS2_PLACEMENT_3D('',#312168,#312169,#312170); +#312168 = CARTESIAN_POINT('',(137.69999955666,-121.7000004176,-3.5E-02) + ); +#312169 = DIRECTION('',(0.,0.,-1.)); +#312170 = DIRECTION('',(1.612113846075E-06,-0.999999999999,0.)); +#312171 = ORIENTED_EDGE('',*,*,#312172,.F.); +#312172 = EDGE_CURVE('',#312173,#312164,#312175,.T.); +#312173 = VERTEX_POINT('',#312174); +#312174 = CARTESIAN_POINT('',(137.505545,-121.894454,0.)); +#312175 = LINE('',#312176,#312177); +#312176 = CARTESIAN_POINT('',(137.505545,-121.894454,0.)); +#312177 = VECTOR('',#312178,1.); +#312178 = DIRECTION('',(0.,0.,-1.)); +#312179 = ORIENTED_EDGE('',*,*,#312180,.F.); +#312180 = EDGE_CURVE('',#312141,#312173,#312181,.T.); +#312181 = CIRCLE('',#312182,0.274999582384); +#312182 = AXIS2_PLACEMENT_3D('',#312183,#312184,#312185); +#312183 = CARTESIAN_POINT('',(137.69999955666,-121.7000004176,0.)); +#312184 = DIRECTION('',(0.,0.,-1.)); +#312185 = DIRECTION('',(1.612113846075E-06,-0.999999999999,0.)); +#312186 = CYLINDRICAL_SURFACE('',#312187,0.274999582384); +#312187 = AXIS2_PLACEMENT_3D('',#312188,#312189,#312190); +#312188 = CARTESIAN_POINT('',(137.69999955666,-121.7000004176,0.)); +#312189 = DIRECTION('',(-0.,-0.,1.)); +#312190 = DIRECTION('',(1.612113846075E-06,-0.999999999999,0.)); +#312191 = ADVANCED_FACE('',(#312192),#312217,.F.); +#312192 = FACE_BOUND('',#312193,.F.); +#312193 = EDGE_LOOP('',(#312194,#312195,#312203,#312211)); +#312194 = ORIENTED_EDGE('',*,*,#312172,.T.); +#312195 = ORIENTED_EDGE('',*,*,#312196,.T.); +#312196 = EDGE_CURVE('',#312164,#312197,#312199,.T.); +#312197 = VERTEX_POINT('',#312198); +#312198 = CARTESIAN_POINT('',(136.305546,-120.694454,-3.5E-02)); +#312199 = LINE('',#312200,#312201); +#312200 = CARTESIAN_POINT('',(137.505545,-121.894454,-3.5E-02)); +#312201 = VECTOR('',#312202,1.); +#312202 = DIRECTION('',(-0.707106486559,0.707107075814,0.)); +#312203 = ORIENTED_EDGE('',*,*,#312204,.F.); +#312204 = EDGE_CURVE('',#312205,#312197,#312207,.T.); +#312205 = VERTEX_POINT('',#312206); +#312206 = CARTESIAN_POINT('',(136.305546,-120.694454,0.)); +#312207 = LINE('',#312208,#312209); +#312208 = CARTESIAN_POINT('',(136.305546,-120.694454,0.)); +#312209 = VECTOR('',#312210,1.); +#312210 = DIRECTION('',(0.,0.,-1.)); +#312211 = ORIENTED_EDGE('',*,*,#312212,.F.); +#312212 = EDGE_CURVE('',#312173,#312205,#312213,.T.); +#312213 = LINE('',#312214,#312215); +#312214 = CARTESIAN_POINT('',(137.505545,-121.894454,0.)); +#312215 = VECTOR('',#312216,1.); +#312216 = DIRECTION('',(-0.707106486559,0.707107075814,0.)); +#312217 = PLANE('',#312218); +#312218 = AXIS2_PLACEMENT_3D('',#312219,#312220,#312221); +#312219 = CARTESIAN_POINT('',(137.505545,-121.894454,0.)); +#312220 = DIRECTION('',(0.707107075814,0.707106486559,0.)); +#312221 = DIRECTION('',(-0.707106486559,0.707107075814,0.)); +#312222 = ADVANCED_FACE('',(#312223),#312250,.T.); +#312223 = FACE_BOUND('',#312224,.F.); +#312224 = EDGE_LOOP('',(#312225,#312226,#312235,#312243)); +#312225 = ORIENTED_EDGE('',*,*,#312204,.T.); +#312226 = ORIENTED_EDGE('',*,*,#312227,.T.); +#312227 = EDGE_CURVE('',#312197,#312228,#312230,.T.); +#312228 = VERTEX_POINT('',#312229); +#312229 = CARTESIAN_POINT('',(136.35,-120.270193,-3.5E-02)); +#312230 = CIRCLE('',#312231,0.274371394825); +#312231 = AXIS2_PLACEMENT_3D('',#312232,#312233,#312234); +#312232 = CARTESIAN_POINT('',(136.4994203333,-120.5003086802,-3.5E-02)); +#312233 = DIRECTION('',(0.,0.,-1.)); +#312234 = DIRECTION('',(-0.706612777285,-0.707600440205,-0.)); +#312235 = ORIENTED_EDGE('',*,*,#312236,.F.); +#312236 = EDGE_CURVE('',#312237,#312228,#312239,.T.); +#312237 = VERTEX_POINT('',#312238); +#312238 = CARTESIAN_POINT('',(136.35,-120.270193,0.)); +#312239 = LINE('',#312240,#312241); +#312240 = CARTESIAN_POINT('',(136.35,-120.270193,0.)); +#312241 = VECTOR('',#312242,1.); +#312242 = DIRECTION('',(0.,0.,-1.)); +#312243 = ORIENTED_EDGE('',*,*,#312244,.F.); +#312244 = EDGE_CURVE('',#312205,#312237,#312245,.T.); +#312245 = CIRCLE('',#312246,0.274371394825); +#312246 = AXIS2_PLACEMENT_3D('',#312247,#312248,#312249); +#312247 = CARTESIAN_POINT('',(136.4994203333,-120.5003086802,0.)); +#312248 = DIRECTION('',(0.,0.,-1.)); +#312249 = DIRECTION('',(-0.706612777285,-0.707600440205,-0.)); +#312250 = CYLINDRICAL_SURFACE('',#312251,0.274371394825); +#312251 = AXIS2_PLACEMENT_3D('',#312252,#312253,#312254); +#312252 = CARTESIAN_POINT('',(136.4994203333,-120.5003086802,0.)); +#312253 = DIRECTION('',(-0.,-0.,1.)); +#312254 = DIRECTION('',(-0.706612777285,-0.707600440205,-0.)); +#312255 = ADVANCED_FACE('',(#312256),#312281,.F.); +#312256 = FACE_BOUND('',#312257,.F.); +#312257 = EDGE_LOOP('',(#312258,#312259,#312267,#312275)); +#312258 = ORIENTED_EDGE('',*,*,#312236,.T.); +#312259 = ORIENTED_EDGE('',*,*,#312260,.T.); +#312260 = EDGE_CURVE('',#312228,#312261,#312263,.T.); +#312261 = VERTEX_POINT('',#312262); +#312262 = CARTESIAN_POINT('',(136.35,-119.837132,-3.5E-02)); +#312263 = LINE('',#312264,#312265); +#312264 = CARTESIAN_POINT('',(136.35,-120.270193,-3.5E-02)); +#312265 = VECTOR('',#312266,1.); +#312266 = DIRECTION('',(0.,1.,0.)); +#312267 = ORIENTED_EDGE('',*,*,#312268,.F.); +#312268 = EDGE_CURVE('',#312269,#312261,#312271,.T.); +#312269 = VERTEX_POINT('',#312270); +#312270 = CARTESIAN_POINT('',(136.35,-119.837132,0.)); +#312271 = LINE('',#312272,#312273); +#312272 = CARTESIAN_POINT('',(136.35,-119.837132,0.)); +#312273 = VECTOR('',#312274,1.); +#312274 = DIRECTION('',(0.,0.,-1.)); +#312275 = ORIENTED_EDGE('',*,*,#312276,.F.); +#312276 = EDGE_CURVE('',#312237,#312269,#312277,.T.); +#312277 = LINE('',#312278,#312279); +#312278 = CARTESIAN_POINT('',(136.35,-120.270193,0.)); +#312279 = VECTOR('',#312280,1.); +#312280 = DIRECTION('',(0.,1.,0.)); +#312281 = PLANE('',#312282); +#312282 = AXIS2_PLACEMENT_3D('',#312283,#312284,#312285); +#312283 = CARTESIAN_POINT('',(136.35,-120.270193,0.)); +#312284 = DIRECTION('',(1.,-0.,0.)); +#312285 = DIRECTION('',(0.,1.,0.)); +#312286 = ADVANCED_FACE('',(#312287),#312312,.F.); +#312287 = FACE_BOUND('',#312288,.F.); +#312288 = EDGE_LOOP('',(#312289,#312290,#312298,#312306)); +#312289 = ORIENTED_EDGE('',*,*,#312268,.T.); +#312290 = ORIENTED_EDGE('',*,*,#312291,.T.); +#312291 = EDGE_CURVE('',#312261,#312292,#312294,.T.); +#312292 = VERTEX_POINT('',#312293); +#312293 = CARTESIAN_POINT('',(135.213956,-118.7,-3.5E-02)); +#312294 = LINE('',#312295,#312296); +#312295 = CARTESIAN_POINT('',(136.35,-119.837132,-3.5E-02)); +#312296 = VECTOR('',#312297,1.); +#312297 = DIRECTION('',(-0.706768260896,0.707445139492,0.)); +#312298 = ORIENTED_EDGE('',*,*,#312299,.F.); +#312299 = EDGE_CURVE('',#312300,#312292,#312302,.T.); +#312300 = VERTEX_POINT('',#312301); +#312301 = CARTESIAN_POINT('',(135.213956,-118.7,0.)); +#312302 = LINE('',#312303,#312304); +#312303 = CARTESIAN_POINT('',(135.213956,-118.7,0.)); +#312304 = VECTOR('',#312305,1.); +#312305 = DIRECTION('',(0.,0.,-1.)); +#312306 = ORIENTED_EDGE('',*,*,#312307,.F.); +#312307 = EDGE_CURVE('',#312269,#312300,#312308,.T.); +#312308 = LINE('',#312309,#312310); +#312309 = CARTESIAN_POINT('',(136.35,-119.837132,0.)); +#312310 = VECTOR('',#312311,1.); +#312311 = DIRECTION('',(-0.706768260896,0.707445139492,0.)); +#312312 = PLANE('',#312313); +#312313 = AXIS2_PLACEMENT_3D('',#312314,#312315,#312316); +#312314 = CARTESIAN_POINT('',(136.35,-119.837132,0.)); +#312315 = DIRECTION('',(0.707445139492,0.706768260896,0.)); +#312316 = DIRECTION('',(-0.706768260896,0.707445139492,0.)); +#312317 = ADVANCED_FACE('',(#312318),#312343,.F.); +#312318 = FACE_BOUND('',#312319,.F.); +#312319 = EDGE_LOOP('',(#312320,#312321,#312329,#312337)); +#312320 = ORIENTED_EDGE('',*,*,#312299,.T.); +#312321 = ORIENTED_EDGE('',*,*,#312322,.T.); +#312322 = EDGE_CURVE('',#312292,#312323,#312325,.T.); +#312323 = VERTEX_POINT('',#312324); +#312324 = CARTESIAN_POINT('',(134.030491,-118.698079,-3.5E-02)); +#312325 = LINE('',#312326,#312327); +#312326 = CARTESIAN_POINT('',(135.213956,-118.7,-3.5E-02)); +#312327 = VECTOR('',#312328,1.); +#312328 = DIRECTION('',(-0.999998682614,1.623197533765E-03,0.)); +#312329 = ORIENTED_EDGE('',*,*,#312330,.F.); +#312330 = EDGE_CURVE('',#312331,#312323,#312333,.T.); +#312331 = VERTEX_POINT('',#312332); +#312332 = CARTESIAN_POINT('',(134.030491,-118.698079,0.)); +#312333 = LINE('',#312334,#312335); +#312334 = CARTESIAN_POINT('',(134.030491,-118.698079,0.)); +#312335 = VECTOR('',#312336,1.); +#312336 = DIRECTION('',(0.,0.,-1.)); +#312337 = ORIENTED_EDGE('',*,*,#312338,.F.); +#312338 = EDGE_CURVE('',#312300,#312331,#312339,.T.); +#312339 = LINE('',#312340,#312341); +#312340 = CARTESIAN_POINT('',(135.213956,-118.7,0.)); +#312341 = VECTOR('',#312342,1.); +#312342 = DIRECTION('',(-0.999998682614,1.623197533765E-03,0.)); +#312343 = PLANE('',#312344); +#312344 = AXIS2_PLACEMENT_3D('',#312345,#312346,#312347); +#312345 = CARTESIAN_POINT('',(135.213956,-118.7,0.)); +#312346 = DIRECTION('',(1.623197533765E-03,0.999998682614,0.)); +#312347 = DIRECTION('',(-0.999998682614,1.623197533765E-03,0.)); +#312348 = ADVANCED_FACE('',(#312349),#312376,.T.); +#312349 = FACE_BOUND('',#312350,.F.); +#312350 = EDGE_LOOP('',(#312351,#312352,#312361,#312369)); +#312351 = ORIENTED_EDGE('',*,*,#312330,.T.); +#312352 = ORIENTED_EDGE('',*,*,#312353,.T.); +#312353 = EDGE_CURVE('',#312323,#312354,#312356,.T.); +#312354 = VERTEX_POINT('',#312355); +#312355 = CARTESIAN_POINT('',(134.030491,-118.501921,-3.5E-02)); +#312356 = CIRCLE('',#312357,0.100000456609); +#312357 = AXIS2_PLACEMENT_3D('',#312358,#312359,#312360); +#312358 = CARTESIAN_POINT('',(134.05,-118.6,-3.5E-02)); +#312359 = DIRECTION('',(0.,0.,-1.)); +#312360 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#312361 = ORIENTED_EDGE('',*,*,#312362,.F.); +#312362 = EDGE_CURVE('',#312363,#312354,#312365,.T.); +#312363 = VERTEX_POINT('',#312364); +#312364 = CARTESIAN_POINT('',(134.030491,-118.501921,0.)); +#312365 = LINE('',#312366,#312367); +#312366 = CARTESIAN_POINT('',(134.030491,-118.501921,0.)); +#312367 = VECTOR('',#312368,1.); +#312368 = DIRECTION('',(0.,0.,-1.)); +#312369 = ORIENTED_EDGE('',*,*,#312370,.F.); +#312370 = EDGE_CURVE('',#312331,#312363,#312371,.T.); +#312371 = CIRCLE('',#312372,0.100000456609); +#312372 = AXIS2_PLACEMENT_3D('',#312373,#312374,#312375); +#312373 = CARTESIAN_POINT('',(134.05,-118.6,0.)); +#312374 = DIRECTION('',(0.,0.,-1.)); +#312375 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#312376 = CYLINDRICAL_SURFACE('',#312377,0.100000456609); +#312377 = AXIS2_PLACEMENT_3D('',#312378,#312379,#312380); +#312378 = CARTESIAN_POINT('',(134.05,-118.6,0.)); +#312379 = DIRECTION('',(-0.,-0.,1.)); +#312380 = DIRECTION('',(-0.195089109206,-0.980785521645,-0.)); +#312381 = ADVANCED_FACE('',(#312382),#312407,.F.); +#312382 = FACE_BOUND('',#312383,.F.); +#312383 = EDGE_LOOP('',(#312384,#312385,#312393,#312401)); +#312384 = ORIENTED_EDGE('',*,*,#312362,.T.); +#312385 = ORIENTED_EDGE('',*,*,#312386,.T.); +#312386 = EDGE_CURVE('',#312354,#312387,#312389,.T.); +#312387 = VERTEX_POINT('',#312388); +#312388 = CARTESIAN_POINT('',(135.216944,-118.5,-3.5E-02)); +#312389 = LINE('',#312390,#312391); +#312390 = CARTESIAN_POINT('',(134.030491,-118.501921,-3.5E-02)); +#312391 = VECTOR('',#312392,1.); +#312392 = DIRECTION('',(0.999998689241,1.619109633528E-03,0.)); +#312393 = ORIENTED_EDGE('',*,*,#312394,.F.); +#312394 = EDGE_CURVE('',#312395,#312387,#312397,.T.); +#312395 = VERTEX_POINT('',#312396); +#312396 = CARTESIAN_POINT('',(135.216944,-118.5,0.)); +#312397 = LINE('',#312398,#312399); +#312398 = CARTESIAN_POINT('',(135.216944,-118.5,0.)); +#312399 = VECTOR('',#312400,1.); +#312400 = DIRECTION('',(0.,0.,-1.)); +#312401 = ORIENTED_EDGE('',*,*,#312402,.F.); +#312402 = EDGE_CURVE('',#312363,#312395,#312403,.T.); +#312403 = LINE('',#312404,#312405); +#312404 = CARTESIAN_POINT('',(134.030491,-118.501921,0.)); +#312405 = VECTOR('',#312406,1.); +#312406 = DIRECTION('',(0.999998689241,1.619109633528E-03,0.)); +#312407 = PLANE('',#312408); +#312408 = AXIS2_PLACEMENT_3D('',#312409,#312410,#312411); +#312409 = CARTESIAN_POINT('',(134.030491,-118.501921,0.)); +#312410 = DIRECTION('',(1.619109633528E-03,-0.999998689241,0.)); +#312411 = DIRECTION('',(0.999998689241,1.619109633528E-03,0.)); +#312412 = ADVANCED_FACE('',(#312413),#312438,.F.); +#312413 = FACE_BOUND('',#312414,.F.); +#312414 = EDGE_LOOP('',(#312415,#312416,#312424,#312432)); +#312415 = ORIENTED_EDGE('',*,*,#312394,.T.); +#312416 = ORIENTED_EDGE('',*,*,#312417,.T.); +#312417 = EDGE_CURVE('',#312387,#312418,#312420,.T.); +#312418 = VERTEX_POINT('',#312419); +#312419 = CARTESIAN_POINT('',(135.241665,-118.475279,-3.5E-02)); +#312420 = LINE('',#312421,#312422); +#312421 = CARTESIAN_POINT('',(135.216944,-118.5,-3.5E-02)); +#312422 = VECTOR('',#312423,1.); +#312423 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312424 = ORIENTED_EDGE('',*,*,#312425,.F.); +#312425 = EDGE_CURVE('',#312426,#312418,#312428,.T.); +#312426 = VERTEX_POINT('',#312427); +#312427 = CARTESIAN_POINT('',(135.241665,-118.475279,0.)); +#312428 = LINE('',#312429,#312430); +#312429 = CARTESIAN_POINT('',(135.241665,-118.475279,0.)); +#312430 = VECTOR('',#312431,1.); +#312431 = DIRECTION('',(0.,0.,-1.)); +#312432 = ORIENTED_EDGE('',*,*,#312433,.F.); +#312433 = EDGE_CURVE('',#312395,#312426,#312434,.T.); +#312434 = LINE('',#312435,#312436); +#312435 = CARTESIAN_POINT('',(135.216944,-118.5,0.)); +#312436 = VECTOR('',#312437,1.); +#312437 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312438 = PLANE('',#312439); +#312439 = AXIS2_PLACEMENT_3D('',#312440,#312441,#312442); +#312440 = CARTESIAN_POINT('',(135.216944,-118.5,0.)); +#312441 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312442 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312443 = ADVANCED_FACE('',(#312444),#312471,.T.); +#312444 = FACE_BOUND('',#312445,.F.); +#312445 = EDGE_LOOP('',(#312446,#312447,#312456,#312464)); +#312446 = ORIENTED_EDGE('',*,*,#312425,.T.); +#312447 = ORIENTED_EDGE('',*,*,#312448,.T.); +#312448 = EDGE_CURVE('',#312418,#312449,#312451,.T.); +#312449 = VERTEX_POINT('',#312450); +#312450 = CARTESIAN_POINT('',(135.408335,-118.475279,-3.5E-02)); +#312451 = CIRCLE('',#312452,0.15000055619); +#312452 = AXIS2_PLACEMENT_3D('',#312453,#312454,#312455); +#312453 = CARTESIAN_POINT('',(135.325,-118.6000004682,-3.5E-02)); +#312454 = DIRECTION('',(0.,0.,-1.)); +#312455 = DIRECTION('',(-0.555564606668,0.831473371683,0.)); +#312456 = ORIENTED_EDGE('',*,*,#312457,.F.); +#312457 = EDGE_CURVE('',#312458,#312449,#312460,.T.); +#312458 = VERTEX_POINT('',#312459); +#312459 = CARTESIAN_POINT('',(135.408335,-118.475279,0.)); +#312460 = LINE('',#312461,#312462); +#312461 = CARTESIAN_POINT('',(135.408335,-118.475279,0.)); +#312462 = VECTOR('',#312463,1.); +#312463 = DIRECTION('',(0.,0.,-1.)); +#312464 = ORIENTED_EDGE('',*,*,#312465,.F.); +#312465 = EDGE_CURVE('',#312426,#312458,#312466,.T.); +#312466 = CIRCLE('',#312467,0.15000055619); +#312467 = AXIS2_PLACEMENT_3D('',#312468,#312469,#312470); +#312468 = CARTESIAN_POINT('',(135.325,-118.6000004682,0.)); +#312469 = DIRECTION('',(0.,0.,-1.)); +#312470 = DIRECTION('',(-0.555564606668,0.831473371683,0.)); +#312471 = CYLINDRICAL_SURFACE('',#312472,0.15000055619); +#312472 = AXIS2_PLACEMENT_3D('',#312473,#312474,#312475); +#312473 = CARTESIAN_POINT('',(135.325,-118.6000004682,0.)); +#312474 = DIRECTION('',(-0.,-0.,1.)); +#312475 = DIRECTION('',(-0.555564606668,0.831473371683,0.)); +#312476 = ADVANCED_FACE('',(#312477),#312502,.F.); +#312477 = FACE_BOUND('',#312478,.F.); +#312478 = EDGE_LOOP('',(#312479,#312480,#312488,#312496)); +#312479 = ORIENTED_EDGE('',*,*,#312457,.T.); +#312480 = ORIENTED_EDGE('',*,*,#312481,.T.); +#312481 = EDGE_CURVE('',#312449,#312482,#312484,.T.); +#312482 = VERTEX_POINT('',#312483); +#312483 = CARTESIAN_POINT('',(136.624721,-119.691665,-3.5E-02)); +#312484 = LINE('',#312485,#312486); +#312485 = CARTESIAN_POINT('',(135.408335,-118.475279,-3.5E-02)); +#312486 = VECTOR('',#312487,1.); +#312487 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312488 = ORIENTED_EDGE('',*,*,#312489,.F.); +#312489 = EDGE_CURVE('',#312490,#312482,#312492,.T.); +#312490 = VERTEX_POINT('',#312491); +#312491 = CARTESIAN_POINT('',(136.624721,-119.691665,0.)); +#312492 = LINE('',#312493,#312494); +#312493 = CARTESIAN_POINT('',(136.624721,-119.691665,0.)); +#312494 = VECTOR('',#312495,1.); +#312495 = DIRECTION('',(0.,0.,-1.)); +#312496 = ORIENTED_EDGE('',*,*,#312497,.F.); +#312497 = EDGE_CURVE('',#312458,#312490,#312498,.T.); +#312498 = LINE('',#312499,#312500); +#312499 = CARTESIAN_POINT('',(135.408335,-118.475279,0.)); +#312500 = VECTOR('',#312501,1.); +#312501 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312502 = PLANE('',#312503); +#312503 = AXIS2_PLACEMENT_3D('',#312504,#312505,#312506); +#312504 = CARTESIAN_POINT('',(135.408335,-118.475279,0.)); +#312505 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#312506 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312507 = ADVANCED_FACE('',(#312508),#312533,.F.); +#312508 = FACE_BOUND('',#312509,.F.); +#312509 = EDGE_LOOP('',(#312510,#312511,#312519,#312527)); +#312510 = ORIENTED_EDGE('',*,*,#312489,.T.); +#312511 = ORIENTED_EDGE('',*,*,#312512,.T.); +#312512 = EDGE_CURVE('',#312482,#312513,#312515,.T.); +#312513 = VERTEX_POINT('',#312514); +#312514 = CARTESIAN_POINT('',(136.647118,-119.745736,-3.5E-02)); +#312515 = LINE('',#312516,#312517); +#312516 = CARTESIAN_POINT('',(136.624721,-119.691665,-3.5E-02)); +#312517 = VECTOR('',#312518,1.); +#312518 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#312519 = ORIENTED_EDGE('',*,*,#312520,.F.); +#312520 = EDGE_CURVE('',#312521,#312513,#312523,.T.); +#312521 = VERTEX_POINT('',#312522); +#312522 = CARTESIAN_POINT('',(136.647118,-119.745736,0.)); +#312523 = LINE('',#312524,#312525); +#312524 = CARTESIAN_POINT('',(136.647118,-119.745736,0.)); +#312525 = VECTOR('',#312526,1.); +#312526 = DIRECTION('',(0.,0.,-1.)); +#312527 = ORIENTED_EDGE('',*,*,#312528,.F.); +#312528 = EDGE_CURVE('',#312490,#312521,#312529,.T.); +#312529 = LINE('',#312530,#312531); +#312530 = CARTESIAN_POINT('',(136.624721,-119.691665,0.)); +#312531 = VECTOR('',#312532,1.); +#312532 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#312533 = PLANE('',#312534); +#312534 = AXIS2_PLACEMENT_3D('',#312535,#312536,#312537); +#312535 = CARTESIAN_POINT('',(136.624721,-119.691665,0.)); +#312536 = DIRECTION('',(-0.923879179303,-0.382684285085,-0.)); +#312537 = DIRECTION('',(0.382684285085,-0.923879179303,0.)); +#312538 = ADVANCED_FACE('',(#312539),#312564,.F.); +#312539 = FACE_BOUND('',#312540,.F.); +#312540 = EDGE_LOOP('',(#312541,#312542,#312550,#312558)); +#312541 = ORIENTED_EDGE('',*,*,#312520,.T.); +#312542 = ORIENTED_EDGE('',*,*,#312543,.T.); +#312543 = EDGE_CURVE('',#312513,#312544,#312546,.T.); +#312544 = VERTEX_POINT('',#312545); +#312545 = CARTESIAN_POINT('',(136.652782,-120.271346,-3.5E-02)); +#312546 = LINE('',#312547,#312548); +#312547 = CARTESIAN_POINT('',(136.647118,-119.745736,-3.5E-02)); +#312548 = VECTOR('',#312549,1.); +#312549 = DIRECTION('',(1.077542506333E-02,-0.999941943422,0.)); +#312550 = ORIENTED_EDGE('',*,*,#312551,.F.); +#312551 = EDGE_CURVE('',#312552,#312544,#312554,.T.); +#312552 = VERTEX_POINT('',#312553); +#312553 = CARTESIAN_POINT('',(136.652782,-120.271346,0.)); +#312554 = LINE('',#312555,#312556); +#312555 = CARTESIAN_POINT('',(136.652782,-120.271346,0.)); +#312556 = VECTOR('',#312557,1.); +#312557 = DIRECTION('',(0.,0.,-1.)); +#312558 = ORIENTED_EDGE('',*,*,#312559,.F.); +#312559 = EDGE_CURVE('',#312521,#312552,#312560,.T.); +#312560 = LINE('',#312561,#312562); +#312561 = CARTESIAN_POINT('',(136.647118,-119.745736,0.)); +#312562 = VECTOR('',#312563,1.); +#312563 = DIRECTION('',(1.077542506333E-02,-0.999941943422,0.)); +#312564 = PLANE('',#312565); +#312565 = AXIS2_PLACEMENT_3D('',#312566,#312567,#312568); +#312566 = CARTESIAN_POINT('',(136.647118,-119.745736,0.)); +#312567 = DIRECTION('',(-0.999941943422,-1.077542506333E-02,-0.)); +#312568 = DIRECTION('',(1.077542506333E-02,-0.999941943422,0.)); +#312569 = ADVANCED_FACE('',(#312570),#312595,.F.); +#312570 = FACE_BOUND('',#312571,.F.); +#312571 = EDGE_LOOP('',(#312572,#312573,#312581,#312589)); +#312572 = ORIENTED_EDGE('',*,*,#312551,.T.); +#312573 = ORIENTED_EDGE('',*,*,#312574,.T.); +#312574 = EDGE_CURVE('',#312544,#312575,#312577,.T.); +#312575 = VERTEX_POINT('',#312576); +#312576 = CARTESIAN_POINT('',(136.694454,-120.305546,-3.5E-02)); +#312577 = LINE('',#312578,#312579); +#312578 = CARTESIAN_POINT('',(136.652782,-120.271346,-3.5E-02)); +#312579 = VECTOR('',#312580,1.); +#312580 = DIRECTION('',(0.773004327382,-0.634400748619,0.)); +#312581 = ORIENTED_EDGE('',*,*,#312582,.F.); +#312582 = EDGE_CURVE('',#312583,#312575,#312585,.T.); +#312583 = VERTEX_POINT('',#312584); +#312584 = CARTESIAN_POINT('',(136.694454,-120.305546,0.)); +#312585 = LINE('',#312586,#312587); +#312586 = CARTESIAN_POINT('',(136.694454,-120.305546,0.)); +#312587 = VECTOR('',#312588,1.); +#312588 = DIRECTION('',(0.,0.,-1.)); +#312589 = ORIENTED_EDGE('',*,*,#312590,.F.); +#312590 = EDGE_CURVE('',#312552,#312583,#312591,.T.); +#312591 = LINE('',#312592,#312593); +#312592 = CARTESIAN_POINT('',(136.652782,-120.271346,0.)); +#312593 = VECTOR('',#312594,1.); +#312594 = DIRECTION('',(0.773004327382,-0.634400748619,0.)); +#312595 = PLANE('',#312596); +#312596 = AXIS2_PLACEMENT_3D('',#312597,#312598,#312599); +#312597 = CARTESIAN_POINT('',(136.652782,-120.271346,0.)); +#312598 = DIRECTION('',(-0.634400748619,-0.773004327382,-0.)); +#312599 = DIRECTION('',(0.773004327382,-0.634400748619,0.)); +#312600 = ADVANCED_FACE('',(#312601),#312626,.F.); +#312601 = FACE_BOUND('',#312602,.F.); +#312602 = EDGE_LOOP('',(#312603,#312604,#312612,#312620)); +#312603 = ORIENTED_EDGE('',*,*,#312582,.T.); +#312604 = ORIENTED_EDGE('',*,*,#312605,.T.); +#312605 = EDGE_CURVE('',#312575,#312606,#312608,.T.); +#312606 = VERTEX_POINT('',#312607); +#312607 = CARTESIAN_POINT('',(137.813909,-121.425,-3.5E-02)); +#312608 = LINE('',#312609,#312610); +#312609 = CARTESIAN_POINT('',(136.694454,-120.305546,-3.5E-02)); +#312610 = VECTOR('',#312611,1.); +#312611 = DIRECTION('',(0.707107097013,-0.70710646536,0.)); +#312612 = ORIENTED_EDGE('',*,*,#312613,.F.); +#312613 = EDGE_CURVE('',#312614,#312606,#312616,.T.); +#312614 = VERTEX_POINT('',#312615); +#312615 = CARTESIAN_POINT('',(137.813909,-121.425,0.)); +#312616 = LINE('',#312617,#312618); +#312617 = CARTESIAN_POINT('',(137.813909,-121.425,0.)); +#312618 = VECTOR('',#312619,1.); +#312619 = DIRECTION('',(0.,0.,-1.)); +#312620 = ORIENTED_EDGE('',*,*,#312621,.F.); +#312621 = EDGE_CURVE('',#312583,#312614,#312622,.T.); +#312622 = LINE('',#312623,#312624); +#312623 = CARTESIAN_POINT('',(136.694454,-120.305546,0.)); +#312624 = VECTOR('',#312625,1.); +#312625 = DIRECTION('',(0.707107097013,-0.70710646536,0.)); +#312626 = PLANE('',#312627); +#312627 = AXIS2_PLACEMENT_3D('',#312628,#312629,#312630); +#312628 = CARTESIAN_POINT('',(136.694454,-120.305546,0.)); +#312629 = DIRECTION('',(-0.70710646536,-0.707107097013,-0.)); +#312630 = DIRECTION('',(0.707107097013,-0.70710646536,0.)); +#312631 = ADVANCED_FACE('',(#312632),#312657,.F.); +#312632 = FACE_BOUND('',#312633,.F.); +#312633 = EDGE_LOOP('',(#312634,#312635,#312643,#312651)); +#312634 = ORIENTED_EDGE('',*,*,#312613,.T.); +#312635 = ORIENTED_EDGE('',*,*,#312636,.T.); +#312636 = EDGE_CURVE('',#312606,#312637,#312639,.T.); +#312637 = VERTEX_POINT('',#312638); +#312638 = CARTESIAN_POINT('',(138.843324,-121.425,-3.5E-02)); +#312639 = LINE('',#312640,#312641); +#312640 = CARTESIAN_POINT('',(137.813909,-121.425,-3.5E-02)); +#312641 = VECTOR('',#312642,1.); +#312642 = DIRECTION('',(1.,0.,0.)); +#312643 = ORIENTED_EDGE('',*,*,#312644,.F.); +#312644 = EDGE_CURVE('',#312645,#312637,#312647,.T.); +#312645 = VERTEX_POINT('',#312646); +#312646 = CARTESIAN_POINT('',(138.843324,-121.425,0.)); +#312647 = LINE('',#312648,#312649); +#312648 = CARTESIAN_POINT('',(138.843324,-121.425,0.)); +#312649 = VECTOR('',#312650,1.); +#312650 = DIRECTION('',(0.,0.,-1.)); +#312651 = ORIENTED_EDGE('',*,*,#312652,.F.); +#312652 = EDGE_CURVE('',#312614,#312645,#312653,.T.); +#312653 = LINE('',#312654,#312655); +#312654 = CARTESIAN_POINT('',(137.813909,-121.425,0.)); +#312655 = VECTOR('',#312656,1.); +#312656 = DIRECTION('',(1.,0.,0.)); +#312657 = PLANE('',#312658); +#312658 = AXIS2_PLACEMENT_3D('',#312659,#312660,#312661); +#312659 = CARTESIAN_POINT('',(137.813909,-121.425,0.)); +#312660 = DIRECTION('',(0.,-1.,0.)); +#312661 = DIRECTION('',(1.,0.,0.)); +#312662 = ADVANCED_FACE('',(#312663),#312688,.F.); +#312663 = FACE_BOUND('',#312664,.F.); +#312664 = EDGE_LOOP('',(#312665,#312666,#312674,#312682)); +#312665 = ORIENTED_EDGE('',*,*,#312644,.T.); +#312666 = ORIENTED_EDGE('',*,*,#312667,.T.); +#312667 = EDGE_CURVE('',#312637,#312668,#312670,.T.); +#312668 = VERTEX_POINT('',#312669); +#312669 = CARTESIAN_POINT('',(139.1,-121.168324,-3.5E-02)); +#312670 = LINE('',#312671,#312672); +#312671 = CARTESIAN_POINT('',(138.843324,-121.425,-3.5E-02)); +#312672 = VECTOR('',#312673,1.); +#312673 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312674 = ORIENTED_EDGE('',*,*,#312675,.F.); +#312675 = EDGE_CURVE('',#312676,#312668,#312678,.T.); +#312676 = VERTEX_POINT('',#312677); +#312677 = CARTESIAN_POINT('',(139.1,-121.168324,0.)); +#312678 = LINE('',#312679,#312680); +#312679 = CARTESIAN_POINT('',(139.1,-121.168324,0.)); +#312680 = VECTOR('',#312681,1.); +#312681 = DIRECTION('',(0.,0.,-1.)); +#312682 = ORIENTED_EDGE('',*,*,#312683,.F.); +#312683 = EDGE_CURVE('',#312645,#312676,#312684,.T.); +#312684 = LINE('',#312685,#312686); +#312685 = CARTESIAN_POINT('',(138.843324,-121.425,0.)); +#312686 = VECTOR('',#312687,1.); +#312687 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312688 = PLANE('',#312689); +#312689 = AXIS2_PLACEMENT_3D('',#312690,#312691,#312692); +#312690 = CARTESIAN_POINT('',(138.843324,-121.425,0.)); +#312691 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312692 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312693 = ADVANCED_FACE('',(#312694),#312719,.F.); +#312694 = FACE_BOUND('',#312695,.F.); +#312695 = EDGE_LOOP('',(#312696,#312697,#312705,#312713)); +#312696 = ORIENTED_EDGE('',*,*,#312675,.T.); +#312697 = ORIENTED_EDGE('',*,*,#312698,.T.); +#312698 = EDGE_CURVE('',#312668,#312699,#312701,.T.); +#312699 = VERTEX_POINT('',#312700); +#312700 = CARTESIAN_POINT('',(139.1,-121.008884,-3.5E-02)); +#312701 = LINE('',#312702,#312703); +#312702 = CARTESIAN_POINT('',(139.1,-121.168324,-3.5E-02)); +#312703 = VECTOR('',#312704,1.); +#312704 = DIRECTION('',(0.,1.,0.)); +#312705 = ORIENTED_EDGE('',*,*,#312706,.F.); +#312706 = EDGE_CURVE('',#312707,#312699,#312709,.T.); +#312707 = VERTEX_POINT('',#312708); +#312708 = CARTESIAN_POINT('',(139.1,-121.008884,0.)); +#312709 = LINE('',#312710,#312711); +#312710 = CARTESIAN_POINT('',(139.1,-121.008884,0.)); +#312711 = VECTOR('',#312712,1.); +#312712 = DIRECTION('',(0.,0.,-1.)); +#312713 = ORIENTED_EDGE('',*,*,#312714,.F.); +#312714 = EDGE_CURVE('',#312676,#312707,#312715,.T.); +#312715 = LINE('',#312716,#312717); +#312716 = CARTESIAN_POINT('',(139.1,-121.168324,0.)); +#312717 = VECTOR('',#312718,1.); +#312718 = DIRECTION('',(0.,1.,0.)); +#312719 = PLANE('',#312720); +#312720 = AXIS2_PLACEMENT_3D('',#312721,#312722,#312723); +#312721 = CARTESIAN_POINT('',(139.1,-121.168324,0.)); +#312722 = DIRECTION('',(1.,-0.,0.)); +#312723 = DIRECTION('',(0.,1.,0.)); +#312724 = ADVANCED_FACE('',(#312725),#312752,.T.); +#312725 = FACE_BOUND('',#312726,.F.); +#312726 = EDGE_LOOP('',(#312727,#312728,#312737,#312745)); +#312727 = ORIENTED_EDGE('',*,*,#312706,.T.); +#312728 = ORIENTED_EDGE('',*,*,#312729,.T.); +#312729 = EDGE_CURVE('',#312699,#312730,#312732,.T.); +#312730 = VERTEX_POINT('',#312731); +#312731 = CARTESIAN_POINT('',(139.180546,-120.81443,-3.5E-02)); +#312732 = CIRCLE('',#312733,0.27499641508); +#312733 = AXIS2_PLACEMENT_3D('',#312734,#312735,#312736); +#312734 = CARTESIAN_POINT('',(139.37499641507,-121.0088832447,-3.5E-02) + ); +#312735 = DIRECTION('',(0.,0.,-1.)); +#312736 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#312737 = ORIENTED_EDGE('',*,*,#312738,.F.); +#312738 = EDGE_CURVE('',#312739,#312730,#312741,.T.); +#312739 = VERTEX_POINT('',#312740); +#312740 = CARTESIAN_POINT('',(139.180546,-120.81443,0.)); +#312741 = LINE('',#312742,#312743); +#312742 = CARTESIAN_POINT('',(139.180546,-120.81443,0.)); +#312743 = VECTOR('',#312744,1.); +#312744 = DIRECTION('',(0.,0.,-1.)); +#312745 = ORIENTED_EDGE('',*,*,#312746,.F.); +#312746 = EDGE_CURVE('',#312707,#312739,#312747,.T.); +#312747 = CIRCLE('',#312748,0.27499641508); +#312748 = AXIS2_PLACEMENT_3D('',#312749,#312750,#312751); +#312749 = CARTESIAN_POINT('',(139.37499641507,-121.0088832447,0.)); +#312750 = DIRECTION('',(0.,0.,-1.)); +#312751 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#312752 = CYLINDRICAL_SURFACE('',#312753,0.27499641508); +#312753 = AXIS2_PLACEMENT_3D('',#312754,#312755,#312756); +#312754 = CARTESIAN_POINT('',(139.37499641507,-121.0088832447,0.)); +#312755 = DIRECTION('',(-0.,-0.,1.)); +#312756 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#312757 = ADVANCED_FACE('',(#312758),#312783,.F.); +#312758 = FACE_BOUND('',#312759,.F.); +#312759 = EDGE_LOOP('',(#312760,#312761,#312769,#312777)); +#312760 = ORIENTED_EDGE('',*,*,#312738,.T.); +#312761 = ORIENTED_EDGE('',*,*,#312762,.T.); +#312762 = EDGE_CURVE('',#312730,#312763,#312765,.T.); +#312763 = VERTEX_POINT('',#312764); +#312764 = CARTESIAN_POINT('',(139.41443,-120.580546,-3.5E-02)); +#312765 = LINE('',#312766,#312767); +#312766 = CARTESIAN_POINT('',(139.180546,-120.81443,-3.5E-02)); +#312767 = VECTOR('',#312768,1.); +#312768 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312769 = ORIENTED_EDGE('',*,*,#312770,.F.); +#312770 = EDGE_CURVE('',#312771,#312763,#312773,.T.); +#312771 = VERTEX_POINT('',#312772); +#312772 = CARTESIAN_POINT('',(139.41443,-120.580546,0.)); +#312773 = LINE('',#312774,#312775); +#312774 = CARTESIAN_POINT('',(139.41443,-120.580546,0.)); +#312775 = VECTOR('',#312776,1.); +#312776 = DIRECTION('',(0.,0.,-1.)); +#312777 = ORIENTED_EDGE('',*,*,#312778,.F.); +#312778 = EDGE_CURVE('',#312739,#312771,#312779,.T.); +#312779 = LINE('',#312780,#312781); +#312780 = CARTESIAN_POINT('',(139.180546,-120.81443,0.)); +#312781 = VECTOR('',#312782,1.); +#312782 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312783 = PLANE('',#312784); +#312784 = AXIS2_PLACEMENT_3D('',#312785,#312786,#312787); +#312785 = CARTESIAN_POINT('',(139.180546,-120.81443,0.)); +#312786 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#312787 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#312788 = ADVANCED_FACE('',(#312789),#312816,.T.); +#312789 = FACE_BOUND('',#312790,.F.); +#312790 = EDGE_LOOP('',(#312791,#312792,#312801,#312809)); +#312791 = ORIENTED_EDGE('',*,*,#312770,.T.); +#312792 = ORIENTED_EDGE('',*,*,#312793,.T.); +#312793 = EDGE_CURVE('',#312763,#312794,#312796,.T.); +#312794 = VERTEX_POINT('',#312795); +#312795 = CARTESIAN_POINT('',(139.608884,-120.5,-3.5E-02)); +#312796 = CIRCLE('',#312797,0.274993677362); +#312797 = AXIS2_PLACEMENT_3D('',#312798,#312799,#312800); +#312798 = CARTESIAN_POINT('',(139.60888211071,-120.7749936773,-3.5E-02) + ); +#312799 = DIRECTION('',(0.,0.,-1.)); +#312800 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#312801 = ORIENTED_EDGE('',*,*,#312802,.F.); +#312802 = EDGE_CURVE('',#312803,#312794,#312805,.T.); +#312803 = VERTEX_POINT('',#312804); +#312804 = CARTESIAN_POINT('',(139.608884,-120.5,0.)); +#312805 = LINE('',#312806,#312807); +#312806 = CARTESIAN_POINT('',(139.608884,-120.5,0.)); +#312807 = VECTOR('',#312808,1.); +#312808 = DIRECTION('',(0.,0.,-1.)); +#312809 = ORIENTED_EDGE('',*,*,#312810,.F.); +#312810 = EDGE_CURVE('',#312771,#312803,#312811,.T.); +#312811 = CIRCLE('',#312812,0.274993677362); +#312812 = AXIS2_PLACEMENT_3D('',#312813,#312814,#312815); +#312813 = CARTESIAN_POINT('',(139.60888211071,-120.7749936773,0.)); +#312814 = DIRECTION('',(0.,0.,-1.)); +#312815 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#312816 = CYLINDRICAL_SURFACE('',#312817,0.274993677362); +#312817 = AXIS2_PLACEMENT_3D('',#312818,#312819,#312820); +#312818 = CARTESIAN_POINT('',(139.60888211071,-120.7749936773,0.)); +#312819 = DIRECTION('',(-0.,-0.,1.)); +#312820 = DIRECTION('',(-0.707114841973,0.707098720308,0.)); +#312821 = ADVANCED_FACE('',(#312822),#312847,.F.); +#312822 = FACE_BOUND('',#312823,.F.); +#312823 = EDGE_LOOP('',(#312824,#312825,#312833,#312841)); +#312824 = ORIENTED_EDGE('',*,*,#312802,.T.); +#312825 = ORIENTED_EDGE('',*,*,#312826,.T.); +#312826 = EDGE_CURVE('',#312794,#312827,#312829,.T.); +#312827 = VERTEX_POINT('',#312828); +#312828 = CARTESIAN_POINT('',(139.707108,-120.5,-3.5E-02)); +#312829 = LINE('',#312830,#312831); +#312830 = CARTESIAN_POINT('',(139.608884,-120.5,-3.5E-02)); +#312831 = VECTOR('',#312832,1.); +#312832 = DIRECTION('',(1.,0.,0.)); +#312833 = ORIENTED_EDGE('',*,*,#312834,.F.); +#312834 = EDGE_CURVE('',#312835,#312827,#312837,.T.); +#312835 = VERTEX_POINT('',#312836); +#312836 = CARTESIAN_POINT('',(139.707108,-120.5,0.)); +#312837 = LINE('',#312838,#312839); +#312838 = CARTESIAN_POINT('',(139.707108,-120.5,0.)); +#312839 = VECTOR('',#312840,1.); +#312840 = DIRECTION('',(0.,0.,-1.)); +#312841 = ORIENTED_EDGE('',*,*,#312842,.F.); +#312842 = EDGE_CURVE('',#312803,#312835,#312843,.T.); +#312843 = LINE('',#312844,#312845); +#312844 = CARTESIAN_POINT('',(139.608884,-120.5,0.)); +#312845 = VECTOR('',#312846,1.); +#312846 = DIRECTION('',(1.,0.,0.)); +#312847 = PLANE('',#312848); +#312848 = AXIS2_PLACEMENT_3D('',#312849,#312850,#312851); +#312849 = CARTESIAN_POINT('',(139.608884,-120.5,0.)); +#312850 = DIRECTION('',(0.,-1.,0.)); +#312851 = DIRECTION('',(1.,0.,0.)); +#312852 = ADVANCED_FACE('',(#312853),#312878,.F.); +#312853 = FACE_BOUND('',#312854,.F.); +#312854 = EDGE_LOOP('',(#312855,#312856,#312864,#312872)); +#312855 = ORIENTED_EDGE('',*,*,#312834,.T.); +#312856 = ORIENTED_EDGE('',*,*,#312857,.T.); +#312857 = EDGE_CURVE('',#312827,#312858,#312860,.T.); +#312858 = VERTEX_POINT('',#312859); +#312859 = CARTESIAN_POINT('',(140.,-120.207107,-3.5E-02)); +#312860 = LINE('',#312861,#312862); +#312861 = CARTESIAN_POINT('',(139.707108,-120.5,-3.5E-02)); +#312862 = VECTOR('',#312863,1.); +#312863 = DIRECTION('',(0.707105574076,0.707107988295,0.)); +#312864 = ORIENTED_EDGE('',*,*,#312865,.F.); +#312865 = EDGE_CURVE('',#312866,#312858,#312868,.T.); +#312866 = VERTEX_POINT('',#312867); +#312867 = CARTESIAN_POINT('',(140.,-120.207107,0.)); +#312868 = LINE('',#312869,#312870); +#312869 = CARTESIAN_POINT('',(140.,-120.207107,0.)); +#312870 = VECTOR('',#312871,1.); +#312871 = DIRECTION('',(0.,0.,-1.)); +#312872 = ORIENTED_EDGE('',*,*,#312873,.F.); +#312873 = EDGE_CURVE('',#312835,#312866,#312874,.T.); +#312874 = LINE('',#312875,#312876); +#312875 = CARTESIAN_POINT('',(139.707108,-120.5,0.)); +#312876 = VECTOR('',#312877,1.); +#312877 = DIRECTION('',(0.707105574076,0.707107988295,0.)); +#312878 = PLANE('',#312879); +#312879 = AXIS2_PLACEMENT_3D('',#312880,#312881,#312882); +#312880 = CARTESIAN_POINT('',(139.707108,-120.5,0.)); +#312881 = DIRECTION('',(0.707107988295,-0.707105574076,0.)); +#312882 = DIRECTION('',(0.707105574076,0.707107988295,0.)); +#312883 = ADVANCED_FACE('',(#312884),#312909,.F.); +#312884 = FACE_BOUND('',#312885,.F.); +#312885 = EDGE_LOOP('',(#312886,#312887,#312895,#312903)); +#312886 = ORIENTED_EDGE('',*,*,#312865,.T.); +#312887 = ORIENTED_EDGE('',*,*,#312888,.T.); +#312888 = EDGE_CURVE('',#312858,#312889,#312891,.T.); +#312889 = VERTEX_POINT('',#312890); +#312890 = CARTESIAN_POINT('',(140.,-119.678984,-3.5E-02)); +#312891 = LINE('',#312892,#312893); +#312892 = CARTESIAN_POINT('',(140.,-120.207107,-3.5E-02)); +#312893 = VECTOR('',#312894,1.); +#312894 = DIRECTION('',(0.,1.,0.)); +#312895 = ORIENTED_EDGE('',*,*,#312896,.F.); +#312896 = EDGE_CURVE('',#312897,#312889,#312899,.T.); +#312897 = VERTEX_POINT('',#312898); +#312898 = CARTESIAN_POINT('',(140.,-119.678984,0.)); +#312899 = LINE('',#312900,#312901); +#312900 = CARTESIAN_POINT('',(140.,-119.678984,0.)); +#312901 = VECTOR('',#312902,1.); +#312902 = DIRECTION('',(0.,0.,-1.)); +#312903 = ORIENTED_EDGE('',*,*,#312904,.F.); +#312904 = EDGE_CURVE('',#312866,#312897,#312905,.T.); +#312905 = LINE('',#312906,#312907); +#312906 = CARTESIAN_POINT('',(140.,-120.207107,0.)); +#312907 = VECTOR('',#312908,1.); +#312908 = DIRECTION('',(0.,1.,0.)); +#312909 = PLANE('',#312910); +#312910 = AXIS2_PLACEMENT_3D('',#312911,#312912,#312913); +#312911 = CARTESIAN_POINT('',(140.,-120.207107,0.)); +#312912 = DIRECTION('',(1.,-0.,0.)); +#312913 = DIRECTION('',(0.,1.,0.)); +#312914 = ADVANCED_FACE('',(#312915),#312942,.T.); +#312915 = FACE_BOUND('',#312916,.F.); +#312916 = EDGE_LOOP('',(#312917,#312918,#312927,#312935)); +#312917 = ORIENTED_EDGE('',*,*,#312896,.T.); +#312918 = ORIENTED_EDGE('',*,*,#312919,.T.); +#312919 = EDGE_CURVE('',#312889,#312920,#312922,.T.); +#312920 = VERTEX_POINT('',#312921); +#312921 = CARTESIAN_POINT('',(140.080546,-119.48453,-3.5E-02)); +#312922 = CIRCLE('',#312923,0.27499641508); +#312923 = AXIS2_PLACEMENT_3D('',#312924,#312925,#312926); +#312924 = CARTESIAN_POINT('',(140.27499641507,-119.6789832447,-3.5E-02) + ); +#312925 = DIRECTION('',(0.,0.,-1.)); +#312926 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#312927 = ORIENTED_EDGE('',*,*,#312928,.F.); +#312928 = EDGE_CURVE('',#312929,#312920,#312931,.T.); +#312929 = VERTEX_POINT('',#312930); +#312930 = CARTESIAN_POINT('',(140.080546,-119.48453,0.)); +#312931 = LINE('',#312932,#312933); +#312932 = CARTESIAN_POINT('',(140.080546,-119.48453,0.)); +#312933 = VECTOR('',#312934,1.); +#312934 = DIRECTION('',(0.,0.,-1.)); +#312935 = ORIENTED_EDGE('',*,*,#312936,.F.); +#312936 = EDGE_CURVE('',#312897,#312929,#312937,.T.); +#312937 = CIRCLE('',#312938,0.27499641508); +#312938 = AXIS2_PLACEMENT_3D('',#312939,#312940,#312941); +#312939 = CARTESIAN_POINT('',(140.27499641507,-119.6789832447,0.)); +#312940 = DIRECTION('',(0.,0.,-1.)); +#312941 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#312942 = CYLINDRICAL_SURFACE('',#312943,0.27499641508); +#312943 = AXIS2_PLACEMENT_3D('',#312944,#312945,#312946); +#312944 = CARTESIAN_POINT('',(140.27499641507,-119.6789832447,0.)); +#312945 = DIRECTION('',(-0.,-0.,1.)); +#312946 = DIRECTION('',(-0.999999999996,-2.74650542507E-06,-0.)); +#312947 = ADVANCED_FACE('',(#312948),#312973,.F.); +#312948 = FACE_BOUND('',#312949,.F.); +#312949 = EDGE_LOOP('',(#312950,#312951,#312959,#312967)); +#312950 = ORIENTED_EDGE('',*,*,#312928,.T.); +#312951 = ORIENTED_EDGE('',*,*,#312952,.T.); +#312952 = EDGE_CURVE('',#312920,#312953,#312955,.T.); +#312953 = VERTEX_POINT('',#312954); +#312954 = CARTESIAN_POINT('',(140.25953,-119.305545,-3.5E-02)); +#312955 = LINE('',#312956,#312957); +#312956 = CARTESIAN_POINT('',(140.080546,-119.48453,-3.5E-02)); +#312957 = VECTOR('',#312958,1.); +#312958 = DIRECTION('',(0.707104805854,0.707108756513,0.)); +#312959 = ORIENTED_EDGE('',*,*,#312960,.F.); +#312960 = EDGE_CURVE('',#312961,#312953,#312963,.T.); +#312961 = VERTEX_POINT('',#312962); +#312962 = CARTESIAN_POINT('',(140.25953,-119.305545,0.)); +#312963 = LINE('',#312964,#312965); +#312964 = CARTESIAN_POINT('',(140.25953,-119.305545,0.)); +#312965 = VECTOR('',#312966,1.); +#312966 = DIRECTION('',(0.,0.,-1.)); +#312967 = ORIENTED_EDGE('',*,*,#312968,.F.); +#312968 = EDGE_CURVE('',#312929,#312961,#312969,.T.); +#312969 = LINE('',#312970,#312971); +#312970 = CARTESIAN_POINT('',(140.080546,-119.48453,0.)); +#312971 = VECTOR('',#312972,1.); +#312972 = DIRECTION('',(0.707104805854,0.707108756513,0.)); +#312973 = PLANE('',#312974); +#312974 = AXIS2_PLACEMENT_3D('',#312975,#312976,#312977); +#312975 = CARTESIAN_POINT('',(140.080546,-119.48453,0.)); +#312976 = DIRECTION('',(0.707108756513,-0.707104805854,0.)); +#312977 = DIRECTION('',(0.707104805854,0.707108756513,0.)); +#312978 = ADVANCED_FACE('',(#312979),#313006,.T.); +#312979 = FACE_BOUND('',#312980,.F.); +#312980 = EDGE_LOOP('',(#312981,#312982,#312991,#312999)); +#312981 = ORIENTED_EDGE('',*,*,#312960,.T.); +#312982 = ORIENTED_EDGE('',*,*,#312983,.T.); +#312983 = EDGE_CURVE('',#312953,#312984,#312986,.T.); +#312984 = VERTEX_POINT('',#312985); +#312985 = CARTESIAN_POINT('',(140.453984,-119.225,-3.5E-02)); +#312986 = CIRCLE('',#312987,0.274998217753); +#312987 = AXIS2_PLACEMENT_3D('',#312988,#312989,#312990); +#312988 = CARTESIAN_POINT('',(140.45398299142,-119.4999982177,-3.5E-02) + ); +#312989 = DIRECTION('',(0.,0.,-1.)); +#312990 = DIRECTION('',(-0.707106369679,0.707107192694,0.)); +#312991 = ORIENTED_EDGE('',*,*,#312992,.F.); +#312992 = EDGE_CURVE('',#312993,#312984,#312995,.T.); +#312993 = VERTEX_POINT('',#312994); +#312994 = CARTESIAN_POINT('',(140.453984,-119.225,0.)); +#312995 = LINE('',#312996,#312997); +#312996 = CARTESIAN_POINT('',(140.453984,-119.225,0.)); +#312997 = VECTOR('',#312998,1.); +#312998 = DIRECTION('',(0.,0.,-1.)); +#312999 = ORIENTED_EDGE('',*,*,#313000,.F.); +#313000 = EDGE_CURVE('',#312961,#312993,#313001,.T.); +#313001 = CIRCLE('',#313002,0.274998217753); +#313002 = AXIS2_PLACEMENT_3D('',#313003,#313004,#313005); +#313003 = CARTESIAN_POINT('',(140.45398299142,-119.4999982177,0.)); +#313004 = DIRECTION('',(0.,0.,-1.)); +#313005 = DIRECTION('',(-0.707106369679,0.707107192694,0.)); +#313006 = CYLINDRICAL_SURFACE('',#313007,0.274998217753); +#313007 = AXIS2_PLACEMENT_3D('',#313008,#313009,#313010); +#313008 = CARTESIAN_POINT('',(140.45398299142,-119.4999982177,0.)); +#313009 = DIRECTION('',(-0.,-0.,1.)); +#313010 = DIRECTION('',(-0.707106369679,0.707107192694,0.)); +#313011 = ADVANCED_FACE('',(#313012),#313037,.F.); +#313012 = FACE_BOUND('',#313013,.F.); +#313013 = EDGE_LOOP('',(#313014,#313015,#313023,#313031)); +#313014 = ORIENTED_EDGE('',*,*,#312992,.T.); +#313015 = ORIENTED_EDGE('',*,*,#313016,.T.); +#313016 = EDGE_CURVE('',#312984,#313017,#313019,.T.); +#313017 = VERTEX_POINT('',#313018); +#313018 = CARTESIAN_POINT('',(140.725,-119.225,-3.5E-02)); +#313019 = LINE('',#313020,#313021); +#313020 = CARTESIAN_POINT('',(140.453984,-119.225,-3.5E-02)); +#313021 = VECTOR('',#313022,1.); +#313022 = DIRECTION('',(1.,0.,0.)); +#313023 = ORIENTED_EDGE('',*,*,#313024,.F.); +#313024 = EDGE_CURVE('',#313025,#313017,#313027,.T.); +#313025 = VERTEX_POINT('',#313026); +#313026 = CARTESIAN_POINT('',(140.725,-119.225,0.)); +#313027 = LINE('',#313028,#313029); +#313028 = CARTESIAN_POINT('',(140.725,-119.225,0.)); +#313029 = VECTOR('',#313030,1.); +#313030 = DIRECTION('',(0.,0.,-1.)); +#313031 = ORIENTED_EDGE('',*,*,#313032,.F.); +#313032 = EDGE_CURVE('',#312993,#313025,#313033,.T.); +#313033 = LINE('',#313034,#313035); +#313034 = CARTESIAN_POINT('',(140.453984,-119.225,0.)); +#313035 = VECTOR('',#313036,1.); +#313036 = DIRECTION('',(1.,0.,0.)); +#313037 = PLANE('',#313038); +#313038 = AXIS2_PLACEMENT_3D('',#313039,#313040,#313041); +#313039 = CARTESIAN_POINT('',(140.453984,-119.225,0.)); +#313040 = DIRECTION('',(0.,-1.,0.)); +#313041 = DIRECTION('',(1.,0.,0.)); +#313042 = ADVANCED_FACE('',(#313043),#313068,.F.); +#313043 = FACE_BOUND('',#313044,.F.); +#313044 = EDGE_LOOP('',(#313045,#313046,#313054,#313062)); +#313045 = ORIENTED_EDGE('',*,*,#313024,.T.); +#313046 = ORIENTED_EDGE('',*,*,#313047,.T.); +#313047 = EDGE_CURVE('',#313017,#313048,#313050,.T.); +#313048 = VERTEX_POINT('',#313049); +#313049 = CARTESIAN_POINT('',(140.725,-118.5,-3.5E-02)); +#313050 = LINE('',#313051,#313052); +#313051 = CARTESIAN_POINT('',(140.725,-119.225,-3.5E-02)); +#313052 = VECTOR('',#313053,1.); +#313053 = DIRECTION('',(0.,1.,0.)); +#313054 = ORIENTED_EDGE('',*,*,#313055,.F.); +#313055 = EDGE_CURVE('',#313056,#313048,#313058,.T.); +#313056 = VERTEX_POINT('',#313057); +#313057 = CARTESIAN_POINT('',(140.725,-118.5,0.)); +#313058 = LINE('',#313059,#313060); +#313059 = CARTESIAN_POINT('',(140.725,-118.5,0.)); +#313060 = VECTOR('',#313061,1.); +#313061 = DIRECTION('',(0.,0.,-1.)); +#313062 = ORIENTED_EDGE('',*,*,#313063,.F.); +#313063 = EDGE_CURVE('',#313025,#313056,#313064,.T.); +#313064 = LINE('',#313065,#313066); +#313065 = CARTESIAN_POINT('',(140.725,-119.225,0.)); +#313066 = VECTOR('',#313067,1.); +#313067 = DIRECTION('',(0.,1.,0.)); +#313068 = PLANE('',#313069); +#313069 = AXIS2_PLACEMENT_3D('',#313070,#313071,#313072); +#313070 = CARTESIAN_POINT('',(140.725,-119.225,0.)); +#313071 = DIRECTION('',(1.,-0.,0.)); +#313072 = DIRECTION('',(0.,1.,0.)); +#313073 = ADVANCED_FACE('',(#313074),#313101,.T.); +#313074 = FACE_BOUND('',#313075,.F.); +#313075 = EDGE_LOOP('',(#313076,#313077,#313086,#313094)); +#313076 = ORIENTED_EDGE('',*,*,#313055,.T.); +#313077 = ORIENTED_EDGE('',*,*,#313078,.T.); +#313078 = EDGE_CURVE('',#313048,#313079,#313081,.T.); +#313079 = VERTEX_POINT('',#313080); +#313080 = CARTESIAN_POINT('',(140.805546,-118.305546,-3.5E-02)); +#313081 = CIRCLE('',#313082,0.27499641508); +#313082 = AXIS2_PLACEMENT_3D('',#313083,#313084,#313085); +#313083 = CARTESIAN_POINT('',(140.99999641507,-118.4999992447,-3.5E-02) + ); +#313084 = DIRECTION('',(0.,0.,-1.)); +#313085 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#313086 = ORIENTED_EDGE('',*,*,#313087,.F.); +#313087 = EDGE_CURVE('',#313088,#313079,#313090,.T.); +#313088 = VERTEX_POINT('',#313089); +#313089 = CARTESIAN_POINT('',(140.805546,-118.305546,0.)); +#313090 = LINE('',#313091,#313092); +#313091 = CARTESIAN_POINT('',(140.805546,-118.305546,0.)); +#313092 = VECTOR('',#313093,1.); +#313093 = DIRECTION('',(0.,0.,-1.)); +#313094 = ORIENTED_EDGE('',*,*,#313095,.F.); +#313095 = EDGE_CURVE('',#313056,#313088,#313096,.T.); +#313096 = CIRCLE('',#313097,0.27499641508); +#313097 = AXIS2_PLACEMENT_3D('',#313098,#313099,#313100); +#313098 = CARTESIAN_POINT('',(140.99999641507,-118.4999992447,0.)); +#313099 = DIRECTION('',(0.,0.,-1.)); +#313100 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#313101 = CYLINDRICAL_SURFACE('',#313102,0.27499641508); +#313102 = AXIS2_PLACEMENT_3D('',#313103,#313104,#313105); +#313103 = CARTESIAN_POINT('',(140.99999641507,-118.4999992447,0.)); +#313104 = DIRECTION('',(-0.,-0.,1.)); +#313105 = DIRECTION('',(-0.999999999996,-2.746504701594E-06,-0.)); +#313106 = ADVANCED_FACE('',(#313107),#313132,.F.); +#313107 = FACE_BOUND('',#313108,.F.); +#313108 = EDGE_LOOP('',(#313109,#313110,#313118,#313126)); +#313109 = ORIENTED_EDGE('',*,*,#313087,.T.); +#313110 = ORIENTED_EDGE('',*,*,#313111,.T.); +#313111 = EDGE_CURVE('',#313079,#313112,#313114,.T.); +#313112 = VERTEX_POINT('',#313113); +#313113 = CARTESIAN_POINT('',(152.125,-106.986091,-3.5E-02)); +#313114 = LINE('',#313115,#313116); +#313115 = CARTESIAN_POINT('',(140.805546,-118.305546,-3.5E-02)); +#313116 = VECTOR('',#313117,1.); +#313117 = DIRECTION('',(0.707106749952,0.707106812421,0.)); +#313118 = ORIENTED_EDGE('',*,*,#313119,.F.); +#313119 = EDGE_CURVE('',#313120,#313112,#313122,.T.); +#313120 = VERTEX_POINT('',#313121); +#313121 = CARTESIAN_POINT('',(152.125,-106.986091,0.)); +#313122 = LINE('',#313123,#313124); +#313123 = CARTESIAN_POINT('',(152.125,-106.986091,0.)); +#313124 = VECTOR('',#313125,1.); +#313125 = DIRECTION('',(0.,0.,-1.)); +#313126 = ORIENTED_EDGE('',*,*,#313127,.F.); +#313127 = EDGE_CURVE('',#313088,#313120,#313128,.T.); +#313128 = LINE('',#313129,#313130); +#313129 = CARTESIAN_POINT('',(140.805546,-118.305546,0.)); +#313130 = VECTOR('',#313131,1.); +#313131 = DIRECTION('',(0.707106749952,0.707106812421,0.)); +#313132 = PLANE('',#313133); +#313133 = AXIS2_PLACEMENT_3D('',#313134,#313135,#313136); +#313134 = CARTESIAN_POINT('',(140.805546,-118.305546,0.)); +#313135 = DIRECTION('',(0.707106812421,-0.707106749952,0.)); +#313136 = DIRECTION('',(0.707106749952,0.707106812421,0.)); +#313137 = ADVANCED_FACE('',(#313138),#313163,.F.); +#313138 = FACE_BOUND('',#313139,.F.); +#313139 = EDGE_LOOP('',(#313140,#313141,#313149,#313157)); +#313140 = ORIENTED_EDGE('',*,*,#313119,.T.); +#313141 = ORIENTED_EDGE('',*,*,#313142,.T.); +#313142 = EDGE_CURVE('',#313112,#313143,#313145,.T.); +#313143 = VERTEX_POINT('',#313144); +#313144 = CARTESIAN_POINT('',(152.125,-103.342766,-3.5E-02)); +#313145 = LINE('',#313146,#313147); +#313146 = CARTESIAN_POINT('',(152.125,-106.986091,-3.5E-02)); +#313147 = VECTOR('',#313148,1.); +#313148 = DIRECTION('',(0.,1.,0.)); +#313149 = ORIENTED_EDGE('',*,*,#313150,.F.); +#313150 = EDGE_CURVE('',#313151,#313143,#313153,.T.); +#313151 = VERTEX_POINT('',#313152); +#313152 = CARTESIAN_POINT('',(152.125,-103.342766,0.)); +#313153 = LINE('',#313154,#313155); +#313154 = CARTESIAN_POINT('',(152.125,-103.342766,0.)); +#313155 = VECTOR('',#313156,1.); +#313156 = DIRECTION('',(0.,0.,-1.)); +#313157 = ORIENTED_EDGE('',*,*,#313158,.F.); +#313158 = EDGE_CURVE('',#313120,#313151,#313159,.T.); +#313159 = LINE('',#313160,#313161); +#313160 = CARTESIAN_POINT('',(152.125,-106.986091,0.)); +#313161 = VECTOR('',#313162,1.); +#313162 = DIRECTION('',(0.,1.,0.)); +#313163 = PLANE('',#313164); +#313164 = AXIS2_PLACEMENT_3D('',#313165,#313166,#313167); +#313165 = CARTESIAN_POINT('',(152.125,-106.986091,0.)); +#313166 = DIRECTION('',(1.,-0.,0.)); +#313167 = DIRECTION('',(0.,1.,0.)); +#313168 = ADVANCED_FACE('',(#313169),#313194,.F.); +#313169 = FACE_BOUND('',#313170,.F.); +#313170 = EDGE_LOOP('',(#313171,#313172,#313180,#313188)); +#313171 = ORIENTED_EDGE('',*,*,#313150,.T.); +#313172 = ORIENTED_EDGE('',*,*,#313173,.T.); +#313173 = EDGE_CURVE('',#313143,#313174,#313176,.T.); +#313174 = VERTEX_POINT('',#313175); +#313175 = CARTESIAN_POINT('',(152.030546,-103.248312,-3.5E-02)); +#313176 = LINE('',#313177,#313178); +#313177 = CARTESIAN_POINT('',(152.125,-103.342766,-3.5E-02)); +#313178 = VECTOR('',#313179,1.); +#313179 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313180 = ORIENTED_EDGE('',*,*,#313181,.F.); +#313181 = EDGE_CURVE('',#313182,#313174,#313184,.T.); +#313182 = VERTEX_POINT('',#313183); +#313183 = CARTESIAN_POINT('',(152.030546,-103.248312,0.)); +#313184 = LINE('',#313185,#313186); +#313185 = CARTESIAN_POINT('',(152.030546,-103.248312,0.)); +#313186 = VECTOR('',#313187,1.); +#313187 = DIRECTION('',(0.,0.,-1.)); +#313188 = ORIENTED_EDGE('',*,*,#313189,.F.); +#313189 = EDGE_CURVE('',#313151,#313182,#313190,.T.); +#313190 = LINE('',#313191,#313192); +#313191 = CARTESIAN_POINT('',(152.125,-103.342766,0.)); +#313192 = VECTOR('',#313193,1.); +#313193 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313194 = PLANE('',#313195); +#313195 = AXIS2_PLACEMENT_3D('',#313196,#313197,#313198); +#313196 = CARTESIAN_POINT('',(152.125,-103.342766,0.)); +#313197 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#313198 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313199 = ADVANCED_FACE('',(#313200),#313227,.T.); +#313200 = FACE_BOUND('',#313201,.F.); +#313201 = EDGE_LOOP('',(#313202,#313203,#313212,#313220)); +#313202 = ORIENTED_EDGE('',*,*,#313181,.T.); +#313203 = ORIENTED_EDGE('',*,*,#313204,.T.); +#313204 = EDGE_CURVE('',#313174,#313205,#313207,.T.); +#313205 = VERTEX_POINT('',#313206); +#313206 = CARTESIAN_POINT('',(151.95,-103.053858,-3.5E-02)); +#313207 = CIRCLE('',#313208,0.274993677363); +#313208 = AXIS2_PLACEMENT_3D('',#313209,#313210,#313211); +#313209 = CARTESIAN_POINT('',(152.22499367735,-103.0538598892,-3.5E-02) + ); +#313210 = DIRECTION('',(0.,0.,-1.)); +#313211 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313212 = ORIENTED_EDGE('',*,*,#313213,.F.); +#313213 = EDGE_CURVE('',#313214,#313205,#313216,.T.); +#313214 = VERTEX_POINT('',#313215); +#313215 = CARTESIAN_POINT('',(151.95,-103.053858,0.)); +#313216 = LINE('',#313217,#313218); +#313217 = CARTESIAN_POINT('',(151.95,-103.053858,0.)); +#313218 = VECTOR('',#313219,1.); +#313219 = DIRECTION('',(0.,0.,-1.)); +#313220 = ORIENTED_EDGE('',*,*,#313221,.F.); +#313221 = EDGE_CURVE('',#313182,#313214,#313222,.T.); +#313222 = CIRCLE('',#313223,0.274993677363); +#313223 = AXIS2_PLACEMENT_3D('',#313224,#313225,#313226); +#313224 = CARTESIAN_POINT('',(152.22499367735,-103.0538598892,0.)); +#313225 = DIRECTION('',(0.,0.,-1.)); +#313226 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313227 = CYLINDRICAL_SURFACE('',#313228,0.274993677363); +#313228 = AXIS2_PLACEMENT_3D('',#313229,#313230,#313231); +#313229 = CARTESIAN_POINT('',(152.22499367735,-103.0538598892,0.)); +#313230 = DIRECTION('',(-0.,-0.,1.)); +#313231 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313232 = ADVANCED_FACE('',(#313233),#313258,.F.); +#313233 = FACE_BOUND('',#313234,.F.); +#313234 = EDGE_LOOP('',(#313235,#313236,#313244,#313252)); +#313235 = ORIENTED_EDGE('',*,*,#313213,.T.); +#313236 = ORIENTED_EDGE('',*,*,#313237,.T.); +#313237 = EDGE_CURVE('',#313205,#313238,#313240,.T.); +#313238 = VERTEX_POINT('',#313239); +#313239 = CARTESIAN_POINT('',(151.95,-102.246142,-3.5E-02)); +#313240 = LINE('',#313241,#313242); +#313241 = CARTESIAN_POINT('',(151.95,-103.053858,-3.5E-02)); +#313242 = VECTOR('',#313243,1.); +#313243 = DIRECTION('',(0.,1.,0.)); +#313244 = ORIENTED_EDGE('',*,*,#313245,.F.); +#313245 = EDGE_CURVE('',#313246,#313238,#313248,.T.); +#313246 = VERTEX_POINT('',#313247); +#313247 = CARTESIAN_POINT('',(151.95,-102.246142,0.)); +#313248 = LINE('',#313249,#313250); +#313249 = CARTESIAN_POINT('',(151.95,-102.246142,0.)); +#313250 = VECTOR('',#313251,1.); +#313251 = DIRECTION('',(0.,0.,-1.)); +#313252 = ORIENTED_EDGE('',*,*,#313253,.F.); +#313253 = EDGE_CURVE('',#313214,#313246,#313254,.T.); +#313254 = LINE('',#313255,#313256); +#313255 = CARTESIAN_POINT('',(151.95,-103.053858,0.)); +#313256 = VECTOR('',#313257,1.); +#313257 = DIRECTION('',(0.,1.,0.)); +#313258 = PLANE('',#313259); +#313259 = AXIS2_PLACEMENT_3D('',#313260,#313261,#313262); +#313260 = CARTESIAN_POINT('',(151.95,-103.053858,0.)); +#313261 = DIRECTION('',(1.,-0.,0.)); +#313262 = DIRECTION('',(0.,1.,0.)); +#313263 = ADVANCED_FACE('',(#313264),#313291,.T.); +#313264 = FACE_BOUND('',#313265,.F.); +#313265 = EDGE_LOOP('',(#313266,#313267,#313276,#313284)); +#313266 = ORIENTED_EDGE('',*,*,#313245,.T.); +#313267 = ORIENTED_EDGE('',*,*,#313268,.T.); +#313268 = EDGE_CURVE('',#313238,#313269,#313271,.T.); +#313269 = VERTEX_POINT('',#313270); +#313270 = CARTESIAN_POINT('',(152.030546,-102.051688,-3.5E-02)); +#313271 = CIRCLE('',#313272,0.27499641508); +#313272 = AXIS2_PLACEMENT_3D('',#313273,#313274,#313275); +#313273 = CARTESIAN_POINT('',(152.22499641507,-102.2461412447,-3.5E-02) + ); +#313274 = DIRECTION('',(0.,0.,-1.)); +#313275 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313276 = ORIENTED_EDGE('',*,*,#313277,.F.); +#313277 = EDGE_CURVE('',#313278,#313269,#313280,.T.); +#313278 = VERTEX_POINT('',#313279); +#313279 = CARTESIAN_POINT('',(152.030546,-102.051688,0.)); +#313280 = LINE('',#313281,#313282); +#313281 = CARTESIAN_POINT('',(152.030546,-102.051688,0.)); +#313282 = VECTOR('',#313283,1.); +#313283 = DIRECTION('',(0.,0.,-1.)); +#313284 = ORIENTED_EDGE('',*,*,#313285,.F.); +#313285 = EDGE_CURVE('',#313246,#313278,#313286,.T.); +#313286 = CIRCLE('',#313287,0.27499641508); +#313287 = AXIS2_PLACEMENT_3D('',#313288,#313289,#313290); +#313288 = CARTESIAN_POINT('',(152.22499641507,-102.2461412447,0.)); +#313289 = DIRECTION('',(0.,0.,-1.)); +#313290 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313291 = CYLINDRICAL_SURFACE('',#313292,0.27499641508); +#313292 = AXIS2_PLACEMENT_3D('',#313293,#313294,#313295); +#313293 = CARTESIAN_POINT('',(152.22499641507,-102.2461412447,0.)); +#313294 = DIRECTION('',(-0.,-0.,1.)); +#313295 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313296 = ADVANCED_FACE('',(#313297),#313322,.F.); +#313297 = FACE_BOUND('',#313298,.F.); +#313298 = EDGE_LOOP('',(#313299,#313300,#313308,#313316)); +#313299 = ORIENTED_EDGE('',*,*,#313277,.T.); +#313300 = ORIENTED_EDGE('',*,*,#313301,.T.); +#313301 = EDGE_CURVE('',#313269,#313302,#313304,.T.); +#313302 = VERTEX_POINT('',#313303); +#313303 = CARTESIAN_POINT('',(152.125,-101.957233,-3.5E-02)); +#313304 = LINE('',#313305,#313306); +#313305 = CARTESIAN_POINT('',(152.030546,-102.051688,-3.5E-02)); +#313306 = VECTOR('',#313307,1.); +#313307 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313308 = ORIENTED_EDGE('',*,*,#313309,.F.); +#313309 = EDGE_CURVE('',#313310,#313302,#313312,.T.); +#313310 = VERTEX_POINT('',#313311); +#313311 = CARTESIAN_POINT('',(152.125,-101.957233,0.)); +#313312 = LINE('',#313313,#313314); +#313313 = CARTESIAN_POINT('',(152.125,-101.957233,0.)); +#313314 = VECTOR('',#313315,1.); +#313315 = DIRECTION('',(0.,0.,-1.)); +#313316 = ORIENTED_EDGE('',*,*,#313317,.F.); +#313317 = EDGE_CURVE('',#313278,#313310,#313318,.T.); +#313318 = LINE('',#313319,#313320); +#313319 = CARTESIAN_POINT('',(152.030546,-102.051688,0.)); +#313320 = VECTOR('',#313321,1.); +#313321 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313322 = PLANE('',#313323); +#313323 = AXIS2_PLACEMENT_3D('',#313324,#313325,#313326); +#313324 = CARTESIAN_POINT('',(152.030546,-102.051688,0.)); +#313325 = DIRECTION('',(0.707110524285,-0.707103038069,0.)); +#313326 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313327 = ADVANCED_FACE('',(#313328),#313353,.F.); +#313328 = FACE_BOUND('',#313329,.F.); +#313329 = EDGE_LOOP('',(#313330,#313331,#313339,#313347)); +#313330 = ORIENTED_EDGE('',*,*,#313309,.T.); +#313331 = ORIENTED_EDGE('',*,*,#313332,.T.); +#313332 = EDGE_CURVE('',#313302,#313333,#313335,.T.); +#313333 = VERTEX_POINT('',#313334); +#313334 = CARTESIAN_POINT('',(152.125,-99.092766,-3.5E-02)); +#313335 = LINE('',#313336,#313337); +#313336 = CARTESIAN_POINT('',(152.125,-101.957233,-3.5E-02)); +#313337 = VECTOR('',#313338,1.); +#313338 = DIRECTION('',(0.,1.,0.)); +#313339 = ORIENTED_EDGE('',*,*,#313340,.F.); +#313340 = EDGE_CURVE('',#313341,#313333,#313343,.T.); +#313341 = VERTEX_POINT('',#313342); +#313342 = CARTESIAN_POINT('',(152.125,-99.092766,0.)); +#313343 = LINE('',#313344,#313345); +#313344 = CARTESIAN_POINT('',(152.125,-99.092766,0.)); +#313345 = VECTOR('',#313346,1.); +#313346 = DIRECTION('',(0.,0.,-1.)); +#313347 = ORIENTED_EDGE('',*,*,#313348,.F.); +#313348 = EDGE_CURVE('',#313310,#313341,#313349,.T.); +#313349 = LINE('',#313350,#313351); +#313350 = CARTESIAN_POINT('',(152.125,-101.957233,0.)); +#313351 = VECTOR('',#313352,1.); +#313352 = DIRECTION('',(0.,1.,0.)); +#313353 = PLANE('',#313354); +#313354 = AXIS2_PLACEMENT_3D('',#313355,#313356,#313357); +#313355 = CARTESIAN_POINT('',(152.125,-101.957233,0.)); +#313356 = DIRECTION('',(1.,-0.,0.)); +#313357 = DIRECTION('',(0.,1.,0.)); +#313358 = ADVANCED_FACE('',(#313359),#313384,.F.); +#313359 = FACE_BOUND('',#313360,.F.); +#313360 = EDGE_LOOP('',(#313361,#313362,#313370,#313378)); +#313361 = ORIENTED_EDGE('',*,*,#313340,.T.); +#313362 = ORIENTED_EDGE('',*,*,#313363,.T.); +#313363 = EDGE_CURVE('',#313333,#313364,#313366,.T.); +#313364 = VERTEX_POINT('',#313365); +#313365 = CARTESIAN_POINT('',(152.030546,-98.998312,-3.5E-02)); +#313366 = LINE('',#313367,#313368); +#313367 = CARTESIAN_POINT('',(152.125,-99.092766,-3.5E-02)); +#313368 = VECTOR('',#313369,1.); +#313369 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313370 = ORIENTED_EDGE('',*,*,#313371,.F.); +#313371 = EDGE_CURVE('',#313372,#313364,#313374,.T.); +#313372 = VERTEX_POINT('',#313373); +#313373 = CARTESIAN_POINT('',(152.030546,-98.998312,0.)); +#313374 = LINE('',#313375,#313376); +#313375 = CARTESIAN_POINT('',(152.030546,-98.998312,0.)); +#313376 = VECTOR('',#313377,1.); +#313377 = DIRECTION('',(0.,0.,-1.)); +#313378 = ORIENTED_EDGE('',*,*,#313379,.F.); +#313379 = EDGE_CURVE('',#313341,#313372,#313380,.T.); +#313380 = LINE('',#313381,#313382); +#313381 = CARTESIAN_POINT('',(152.125,-99.092766,0.)); +#313382 = VECTOR('',#313383,1.); +#313383 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313384 = PLANE('',#313385); +#313385 = AXIS2_PLACEMENT_3D('',#313386,#313387,#313388); +#313386 = CARTESIAN_POINT('',(152.125,-99.092766,0.)); +#313387 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#313388 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313389 = ADVANCED_FACE('',(#313390),#313417,.T.); +#313390 = FACE_BOUND('',#313391,.F.); +#313391 = EDGE_LOOP('',(#313392,#313393,#313402,#313410)); +#313392 = ORIENTED_EDGE('',*,*,#313371,.T.); +#313393 = ORIENTED_EDGE('',*,*,#313394,.T.); +#313394 = EDGE_CURVE('',#313364,#313395,#313397,.T.); +#313395 = VERTEX_POINT('',#313396); +#313396 = CARTESIAN_POINT('',(151.95,-98.803858,-3.5E-02)); +#313397 = CIRCLE('',#313398,0.274993677363); +#313398 = AXIS2_PLACEMENT_3D('',#313399,#313400,#313401); +#313399 = CARTESIAN_POINT('',(152.22499367735,-98.80385988928,-3.5E-02) + ); +#313400 = DIRECTION('',(0.,0.,-1.)); +#313401 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313402 = ORIENTED_EDGE('',*,*,#313403,.F.); +#313403 = EDGE_CURVE('',#313404,#313395,#313406,.T.); +#313404 = VERTEX_POINT('',#313405); +#313405 = CARTESIAN_POINT('',(151.95,-98.803858,0.)); +#313406 = LINE('',#313407,#313408); +#313407 = CARTESIAN_POINT('',(151.95,-98.803858,0.)); +#313408 = VECTOR('',#313409,1.); +#313409 = DIRECTION('',(0.,0.,-1.)); +#313410 = ORIENTED_EDGE('',*,*,#313411,.F.); +#313411 = EDGE_CURVE('',#313372,#313404,#313412,.T.); +#313412 = CIRCLE('',#313413,0.274993677363); +#313413 = AXIS2_PLACEMENT_3D('',#313414,#313415,#313416); +#313414 = CARTESIAN_POINT('',(152.22499367735,-98.80385988928,0.)); +#313415 = DIRECTION('',(0.,0.,-1.)); +#313416 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313417 = CYLINDRICAL_SURFACE('',#313418,0.274993677363); +#313418 = AXIS2_PLACEMENT_3D('',#313419,#313420,#313421); +#313419 = CARTESIAN_POINT('',(152.22499367735,-98.80385988928,0.)); +#313420 = DIRECTION('',(-0.,-0.,1.)); +#313421 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313422 = ADVANCED_FACE('',(#313423),#313448,.F.); +#313423 = FACE_BOUND('',#313424,.F.); +#313424 = EDGE_LOOP('',(#313425,#313426,#313434,#313442)); +#313425 = ORIENTED_EDGE('',*,*,#313403,.T.); +#313426 = ORIENTED_EDGE('',*,*,#313427,.T.); +#313427 = EDGE_CURVE('',#313395,#313428,#313430,.T.); +#313428 = VERTEX_POINT('',#313429); +#313429 = CARTESIAN_POINT('',(151.95,-97.996142,-3.5E-02)); +#313430 = LINE('',#313431,#313432); +#313431 = CARTESIAN_POINT('',(151.95,-98.803858,-3.5E-02)); +#313432 = VECTOR('',#313433,1.); +#313433 = DIRECTION('',(0.,1.,0.)); +#313434 = ORIENTED_EDGE('',*,*,#313435,.F.); +#313435 = EDGE_CURVE('',#313436,#313428,#313438,.T.); +#313436 = VERTEX_POINT('',#313437); +#313437 = CARTESIAN_POINT('',(151.95,-97.996142,0.)); +#313438 = LINE('',#313439,#313440); +#313439 = CARTESIAN_POINT('',(151.95,-97.996142,0.)); +#313440 = VECTOR('',#313441,1.); +#313441 = DIRECTION('',(0.,0.,-1.)); +#313442 = ORIENTED_EDGE('',*,*,#313443,.F.); +#313443 = EDGE_CURVE('',#313404,#313436,#313444,.T.); +#313444 = LINE('',#313445,#313446); +#313445 = CARTESIAN_POINT('',(151.95,-98.803858,0.)); +#313446 = VECTOR('',#313447,1.); +#313447 = DIRECTION('',(0.,1.,0.)); +#313448 = PLANE('',#313449); +#313449 = AXIS2_PLACEMENT_3D('',#313450,#313451,#313452); +#313450 = CARTESIAN_POINT('',(151.95,-98.803858,0.)); +#313451 = DIRECTION('',(1.,-0.,0.)); +#313452 = DIRECTION('',(0.,1.,0.)); +#313453 = ADVANCED_FACE('',(#313454),#313481,.T.); +#313454 = FACE_BOUND('',#313455,.F.); +#313455 = EDGE_LOOP('',(#313456,#313457,#313466,#313474)); +#313456 = ORIENTED_EDGE('',*,*,#313435,.T.); +#313457 = ORIENTED_EDGE('',*,*,#313458,.T.); +#313458 = EDGE_CURVE('',#313428,#313459,#313461,.T.); +#313459 = VERTEX_POINT('',#313460); +#313460 = CARTESIAN_POINT('',(152.030546,-97.801688,-3.5E-02)); +#313461 = CIRCLE('',#313462,0.27499641508); +#313462 = AXIS2_PLACEMENT_3D('',#313463,#313464,#313465); +#313463 = CARTESIAN_POINT('',(152.22499641507,-97.99614124472,-3.5E-02) + ); +#313464 = DIRECTION('',(0.,0.,-1.)); +#313465 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313466 = ORIENTED_EDGE('',*,*,#313467,.F.); +#313467 = EDGE_CURVE('',#313468,#313459,#313470,.T.); +#313468 = VERTEX_POINT('',#313469); +#313469 = CARTESIAN_POINT('',(152.030546,-97.801688,0.)); +#313470 = LINE('',#313471,#313472); +#313471 = CARTESIAN_POINT('',(152.030546,-97.801688,0.)); +#313472 = VECTOR('',#313473,1.); +#313473 = DIRECTION('',(0.,0.,-1.)); +#313474 = ORIENTED_EDGE('',*,*,#313475,.F.); +#313475 = EDGE_CURVE('',#313436,#313468,#313476,.T.); +#313476 = CIRCLE('',#313477,0.27499641508); +#313477 = AXIS2_PLACEMENT_3D('',#313478,#313479,#313480); +#313478 = CARTESIAN_POINT('',(152.22499641507,-97.99614124472,0.)); +#313479 = DIRECTION('',(0.,0.,-1.)); +#313480 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313481 = CYLINDRICAL_SURFACE('',#313482,0.27499641508); +#313482 = AXIS2_PLACEMENT_3D('',#313483,#313484,#313485); +#313483 = CARTESIAN_POINT('',(152.22499641507,-97.99614124472,0.)); +#313484 = DIRECTION('',(-0.,-0.,1.)); +#313485 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313486 = ADVANCED_FACE('',(#313487),#313512,.F.); +#313487 = FACE_BOUND('',#313488,.F.); +#313488 = EDGE_LOOP('',(#313489,#313490,#313498,#313506)); +#313489 = ORIENTED_EDGE('',*,*,#313467,.T.); +#313490 = ORIENTED_EDGE('',*,*,#313491,.T.); +#313491 = EDGE_CURVE('',#313459,#313492,#313494,.T.); +#313492 = VERTEX_POINT('',#313493); +#313493 = CARTESIAN_POINT('',(152.125,-97.707233,-3.5E-02)); +#313494 = LINE('',#313495,#313496); +#313495 = CARTESIAN_POINT('',(152.030546,-97.801688,-3.5E-02)); +#313496 = VECTOR('',#313497,1.); +#313497 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313498 = ORIENTED_EDGE('',*,*,#313499,.F.); +#313499 = EDGE_CURVE('',#313500,#313492,#313502,.T.); +#313500 = VERTEX_POINT('',#313501); +#313501 = CARTESIAN_POINT('',(152.125,-97.707233,0.)); +#313502 = LINE('',#313503,#313504); +#313503 = CARTESIAN_POINT('',(152.125,-97.707233,0.)); +#313504 = VECTOR('',#313505,1.); +#313505 = DIRECTION('',(0.,0.,-1.)); +#313506 = ORIENTED_EDGE('',*,*,#313507,.F.); +#313507 = EDGE_CURVE('',#313468,#313500,#313508,.T.); +#313508 = LINE('',#313509,#313510); +#313509 = CARTESIAN_POINT('',(152.030546,-97.801688,0.)); +#313510 = VECTOR('',#313511,1.); +#313511 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313512 = PLANE('',#313513); +#313513 = AXIS2_PLACEMENT_3D('',#313514,#313515,#313516); +#313514 = CARTESIAN_POINT('',(152.030546,-97.801688,0.)); +#313515 = DIRECTION('',(0.707110524285,-0.707103038069,0.)); +#313516 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313517 = ADVANCED_FACE('',(#313518),#313543,.F.); +#313518 = FACE_BOUND('',#313519,.F.); +#313519 = EDGE_LOOP('',(#313520,#313521,#313529,#313537)); +#313520 = ORIENTED_EDGE('',*,*,#313499,.T.); +#313521 = ORIENTED_EDGE('',*,*,#313522,.T.); +#313522 = EDGE_CURVE('',#313492,#313523,#313525,.T.); +#313523 = VERTEX_POINT('',#313524); +#313524 = CARTESIAN_POINT('',(152.125,-93.317766,-3.5E-02)); +#313525 = LINE('',#313526,#313527); +#313526 = CARTESIAN_POINT('',(152.125,-97.707233,-3.5E-02)); +#313527 = VECTOR('',#313528,1.); +#313528 = DIRECTION('',(0.,1.,0.)); +#313529 = ORIENTED_EDGE('',*,*,#313530,.F.); +#313530 = EDGE_CURVE('',#313531,#313523,#313533,.T.); +#313531 = VERTEX_POINT('',#313532); +#313532 = CARTESIAN_POINT('',(152.125,-93.317766,0.)); +#313533 = LINE('',#313534,#313535); +#313534 = CARTESIAN_POINT('',(152.125,-93.317766,0.)); +#313535 = VECTOR('',#313536,1.); +#313536 = DIRECTION('',(0.,0.,-1.)); +#313537 = ORIENTED_EDGE('',*,*,#313538,.F.); +#313538 = EDGE_CURVE('',#313500,#313531,#313539,.T.); +#313539 = LINE('',#313540,#313541); +#313540 = CARTESIAN_POINT('',(152.125,-97.707233,0.)); +#313541 = VECTOR('',#313542,1.); +#313542 = DIRECTION('',(0.,1.,0.)); +#313543 = PLANE('',#313544); +#313544 = AXIS2_PLACEMENT_3D('',#313545,#313546,#313547); +#313545 = CARTESIAN_POINT('',(152.125,-97.707233,0.)); +#313546 = DIRECTION('',(1.,-0.,0.)); +#313547 = DIRECTION('',(0.,1.,0.)); +#313548 = ADVANCED_FACE('',(#313549),#313574,.F.); +#313549 = FACE_BOUND('',#313550,.F.); +#313550 = EDGE_LOOP('',(#313551,#313552,#313560,#313568)); +#313551 = ORIENTED_EDGE('',*,*,#313530,.T.); +#313552 = ORIENTED_EDGE('',*,*,#313553,.T.); +#313553 = EDGE_CURVE('',#313523,#313554,#313556,.T.); +#313554 = VERTEX_POINT('',#313555); +#313555 = CARTESIAN_POINT('',(152.030546,-93.223312,-3.5E-02)); +#313556 = LINE('',#313557,#313558); +#313557 = CARTESIAN_POINT('',(152.125,-93.317766,-3.5E-02)); +#313558 = VECTOR('',#313559,1.); +#313559 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313560 = ORIENTED_EDGE('',*,*,#313561,.F.); +#313561 = EDGE_CURVE('',#313562,#313554,#313564,.T.); +#313562 = VERTEX_POINT('',#313563); +#313563 = CARTESIAN_POINT('',(152.030546,-93.223312,0.)); +#313564 = LINE('',#313565,#313566); +#313565 = CARTESIAN_POINT('',(152.030546,-93.223312,0.)); +#313566 = VECTOR('',#313567,1.); +#313567 = DIRECTION('',(0.,0.,-1.)); +#313568 = ORIENTED_EDGE('',*,*,#313569,.F.); +#313569 = EDGE_CURVE('',#313531,#313562,#313570,.T.); +#313570 = LINE('',#313571,#313572); +#313571 = CARTESIAN_POINT('',(152.125,-93.317766,0.)); +#313572 = VECTOR('',#313573,1.); +#313573 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313574 = PLANE('',#313575); +#313575 = AXIS2_PLACEMENT_3D('',#313576,#313577,#313578); +#313576 = CARTESIAN_POINT('',(152.125,-93.317766,0.)); +#313577 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#313578 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313579 = ADVANCED_FACE('',(#313580),#313607,.T.); +#313580 = FACE_BOUND('',#313581,.F.); +#313581 = EDGE_LOOP('',(#313582,#313583,#313592,#313600)); +#313582 = ORIENTED_EDGE('',*,*,#313561,.T.); +#313583 = ORIENTED_EDGE('',*,*,#313584,.T.); +#313584 = EDGE_CURVE('',#313554,#313585,#313587,.T.); +#313585 = VERTEX_POINT('',#313586); +#313586 = CARTESIAN_POINT('',(151.95,-93.028858,-3.5E-02)); +#313587 = CIRCLE('',#313588,0.274993677363); +#313588 = AXIS2_PLACEMENT_3D('',#313589,#313590,#313591); +#313589 = CARTESIAN_POINT('',(152.22499367735,-93.02885988928,-3.5E-02) + ); +#313590 = DIRECTION('',(0.,0.,-1.)); +#313591 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313592 = ORIENTED_EDGE('',*,*,#313593,.F.); +#313593 = EDGE_CURVE('',#313594,#313585,#313596,.T.); +#313594 = VERTEX_POINT('',#313595); +#313595 = CARTESIAN_POINT('',(151.95,-93.028858,0.)); +#313596 = LINE('',#313597,#313598); +#313597 = CARTESIAN_POINT('',(151.95,-93.028858,0.)); +#313598 = VECTOR('',#313599,1.); +#313599 = DIRECTION('',(0.,0.,-1.)); +#313600 = ORIENTED_EDGE('',*,*,#313601,.F.); +#313601 = EDGE_CURVE('',#313562,#313594,#313602,.T.); +#313602 = CIRCLE('',#313603,0.274993677363); +#313603 = AXIS2_PLACEMENT_3D('',#313604,#313605,#313606); +#313604 = CARTESIAN_POINT('',(152.22499367735,-93.02885988928,0.)); +#313605 = DIRECTION('',(0.,0.,-1.)); +#313606 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313607 = CYLINDRICAL_SURFACE('',#313608,0.274993677363); +#313608 = AXIS2_PLACEMENT_3D('',#313609,#313610,#313611); +#313609 = CARTESIAN_POINT('',(152.22499367735,-93.02885988928,0.)); +#313610 = DIRECTION('',(-0.,-0.,1.)); +#313611 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313612 = ADVANCED_FACE('',(#313613),#313638,.F.); +#313613 = FACE_BOUND('',#313614,.F.); +#313614 = EDGE_LOOP('',(#313615,#313616,#313624,#313632)); +#313615 = ORIENTED_EDGE('',*,*,#313593,.T.); +#313616 = ORIENTED_EDGE('',*,*,#313617,.T.); +#313617 = EDGE_CURVE('',#313585,#313618,#313620,.T.); +#313618 = VERTEX_POINT('',#313619); +#313619 = CARTESIAN_POINT('',(151.95,-92.221142,-3.5E-02)); +#313620 = LINE('',#313621,#313622); +#313621 = CARTESIAN_POINT('',(151.95,-93.028858,-3.5E-02)); +#313622 = VECTOR('',#313623,1.); +#313623 = DIRECTION('',(0.,1.,0.)); +#313624 = ORIENTED_EDGE('',*,*,#313625,.F.); +#313625 = EDGE_CURVE('',#313626,#313618,#313628,.T.); +#313626 = VERTEX_POINT('',#313627); +#313627 = CARTESIAN_POINT('',(151.95,-92.221142,0.)); +#313628 = LINE('',#313629,#313630); +#313629 = CARTESIAN_POINT('',(151.95,-92.221142,0.)); +#313630 = VECTOR('',#313631,1.); +#313631 = DIRECTION('',(0.,0.,-1.)); +#313632 = ORIENTED_EDGE('',*,*,#313633,.F.); +#313633 = EDGE_CURVE('',#313594,#313626,#313634,.T.); +#313634 = LINE('',#313635,#313636); +#313635 = CARTESIAN_POINT('',(151.95,-93.028858,0.)); +#313636 = VECTOR('',#313637,1.); +#313637 = DIRECTION('',(0.,1.,0.)); +#313638 = PLANE('',#313639); +#313639 = AXIS2_PLACEMENT_3D('',#313640,#313641,#313642); +#313640 = CARTESIAN_POINT('',(151.95,-93.028858,0.)); +#313641 = DIRECTION('',(1.,-0.,0.)); +#313642 = DIRECTION('',(0.,1.,0.)); +#313643 = ADVANCED_FACE('',(#313644),#313671,.T.); +#313644 = FACE_BOUND('',#313645,.F.); +#313645 = EDGE_LOOP('',(#313646,#313647,#313656,#313664)); +#313646 = ORIENTED_EDGE('',*,*,#313625,.T.); +#313647 = ORIENTED_EDGE('',*,*,#313648,.T.); +#313648 = EDGE_CURVE('',#313618,#313649,#313651,.T.); +#313649 = VERTEX_POINT('',#313650); +#313650 = CARTESIAN_POINT('',(152.030546,-92.026688,-3.5E-02)); +#313651 = CIRCLE('',#313652,0.27499641508); +#313652 = AXIS2_PLACEMENT_3D('',#313653,#313654,#313655); +#313653 = CARTESIAN_POINT('',(152.22499641507,-92.22114124472,-3.5E-02) + ); +#313654 = DIRECTION('',(0.,0.,-1.)); +#313655 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313656 = ORIENTED_EDGE('',*,*,#313657,.F.); +#313657 = EDGE_CURVE('',#313658,#313649,#313660,.T.); +#313658 = VERTEX_POINT('',#313659); +#313659 = CARTESIAN_POINT('',(152.030546,-92.026688,0.)); +#313660 = LINE('',#313661,#313662); +#313661 = CARTESIAN_POINT('',(152.030546,-92.026688,0.)); +#313662 = VECTOR('',#313663,1.); +#313663 = DIRECTION('',(0.,0.,-1.)); +#313664 = ORIENTED_EDGE('',*,*,#313665,.F.); +#313665 = EDGE_CURVE('',#313626,#313658,#313666,.T.); +#313666 = CIRCLE('',#313667,0.27499641508); +#313667 = AXIS2_PLACEMENT_3D('',#313668,#313669,#313670); +#313668 = CARTESIAN_POINT('',(152.22499641507,-92.22114124472,0.)); +#313669 = DIRECTION('',(0.,0.,-1.)); +#313670 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313671 = CYLINDRICAL_SURFACE('',#313672,0.27499641508); +#313672 = AXIS2_PLACEMENT_3D('',#313673,#313674,#313675); +#313673 = CARTESIAN_POINT('',(152.22499641507,-92.22114124472,0.)); +#313674 = DIRECTION('',(-0.,-0.,1.)); +#313675 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313676 = ADVANCED_FACE('',(#313677),#313702,.F.); +#313677 = FACE_BOUND('',#313678,.F.); +#313678 = EDGE_LOOP('',(#313679,#313680,#313688,#313696)); +#313679 = ORIENTED_EDGE('',*,*,#313657,.T.); +#313680 = ORIENTED_EDGE('',*,*,#313681,.T.); +#313681 = EDGE_CURVE('',#313649,#313682,#313684,.T.); +#313682 = VERTEX_POINT('',#313683); +#313683 = CARTESIAN_POINT('',(152.125,-91.932233,-3.5E-02)); +#313684 = LINE('',#313685,#313686); +#313685 = CARTESIAN_POINT('',(152.030546,-92.026688,-3.5E-02)); +#313686 = VECTOR('',#313687,1.); +#313687 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313688 = ORIENTED_EDGE('',*,*,#313689,.F.); +#313689 = EDGE_CURVE('',#313690,#313682,#313692,.T.); +#313690 = VERTEX_POINT('',#313691); +#313691 = CARTESIAN_POINT('',(152.125,-91.932233,0.)); +#313692 = LINE('',#313693,#313694); +#313693 = CARTESIAN_POINT('',(152.125,-91.932233,0.)); +#313694 = VECTOR('',#313695,1.); +#313695 = DIRECTION('',(0.,0.,-1.)); +#313696 = ORIENTED_EDGE('',*,*,#313697,.F.); +#313697 = EDGE_CURVE('',#313658,#313690,#313698,.T.); +#313698 = LINE('',#313699,#313700); +#313699 = CARTESIAN_POINT('',(152.030546,-92.026688,0.)); +#313700 = VECTOR('',#313701,1.); +#313701 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313702 = PLANE('',#313703); +#313703 = AXIS2_PLACEMENT_3D('',#313704,#313705,#313706); +#313704 = CARTESIAN_POINT('',(152.030546,-92.026688,0.)); +#313705 = DIRECTION('',(0.707110524285,-0.707103038069,0.)); +#313706 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313707 = ADVANCED_FACE('',(#313708),#313733,.F.); +#313708 = FACE_BOUND('',#313709,.F.); +#313709 = EDGE_LOOP('',(#313710,#313711,#313719,#313727)); +#313710 = ORIENTED_EDGE('',*,*,#313689,.T.); +#313711 = ORIENTED_EDGE('',*,*,#313712,.T.); +#313712 = EDGE_CURVE('',#313682,#313713,#313715,.T.); +#313713 = VERTEX_POINT('',#313714); +#313714 = CARTESIAN_POINT('',(152.125,-89.067766,-3.5E-02)); +#313715 = LINE('',#313716,#313717); +#313716 = CARTESIAN_POINT('',(152.125,-91.932233,-3.5E-02)); +#313717 = VECTOR('',#313718,1.); +#313718 = DIRECTION('',(0.,1.,0.)); +#313719 = ORIENTED_EDGE('',*,*,#313720,.F.); +#313720 = EDGE_CURVE('',#313721,#313713,#313723,.T.); +#313721 = VERTEX_POINT('',#313722); +#313722 = CARTESIAN_POINT('',(152.125,-89.067766,0.)); +#313723 = LINE('',#313724,#313725); +#313724 = CARTESIAN_POINT('',(152.125,-89.067766,0.)); +#313725 = VECTOR('',#313726,1.); +#313726 = DIRECTION('',(0.,0.,-1.)); +#313727 = ORIENTED_EDGE('',*,*,#313728,.F.); +#313728 = EDGE_CURVE('',#313690,#313721,#313729,.T.); +#313729 = LINE('',#313730,#313731); +#313730 = CARTESIAN_POINT('',(152.125,-91.932233,0.)); +#313731 = VECTOR('',#313732,1.); +#313732 = DIRECTION('',(0.,1.,0.)); +#313733 = PLANE('',#313734); +#313734 = AXIS2_PLACEMENT_3D('',#313735,#313736,#313737); +#313735 = CARTESIAN_POINT('',(152.125,-91.932233,0.)); +#313736 = DIRECTION('',(1.,-0.,0.)); +#313737 = DIRECTION('',(0.,1.,0.)); +#313738 = ADVANCED_FACE('',(#313739),#313764,.F.); +#313739 = FACE_BOUND('',#313740,.F.); +#313740 = EDGE_LOOP('',(#313741,#313742,#313750,#313758)); +#313741 = ORIENTED_EDGE('',*,*,#313720,.T.); +#313742 = ORIENTED_EDGE('',*,*,#313743,.T.); +#313743 = EDGE_CURVE('',#313713,#313744,#313746,.T.); +#313744 = VERTEX_POINT('',#313745); +#313745 = CARTESIAN_POINT('',(152.030546,-88.973312,-3.5E-02)); +#313746 = LINE('',#313747,#313748); +#313747 = CARTESIAN_POINT('',(152.125,-89.067766,-3.5E-02)); +#313748 = VECTOR('',#313749,1.); +#313749 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313750 = ORIENTED_EDGE('',*,*,#313751,.F.); +#313751 = EDGE_CURVE('',#313752,#313744,#313754,.T.); +#313752 = VERTEX_POINT('',#313753); +#313753 = CARTESIAN_POINT('',(152.030546,-88.973312,0.)); +#313754 = LINE('',#313755,#313756); +#313755 = CARTESIAN_POINT('',(152.030546,-88.973312,0.)); +#313756 = VECTOR('',#313757,1.); +#313757 = DIRECTION('',(0.,0.,-1.)); +#313758 = ORIENTED_EDGE('',*,*,#313759,.F.); +#313759 = EDGE_CURVE('',#313721,#313752,#313760,.T.); +#313760 = LINE('',#313761,#313762); +#313761 = CARTESIAN_POINT('',(152.125,-89.067766,0.)); +#313762 = VECTOR('',#313763,1.); +#313763 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313764 = PLANE('',#313765); +#313765 = AXIS2_PLACEMENT_3D('',#313766,#313767,#313768); +#313766 = CARTESIAN_POINT('',(152.125,-89.067766,0.)); +#313767 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#313768 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#313769 = ADVANCED_FACE('',(#313770),#313797,.T.); +#313770 = FACE_BOUND('',#313771,.F.); +#313771 = EDGE_LOOP('',(#313772,#313773,#313782,#313790)); +#313772 = ORIENTED_EDGE('',*,*,#313751,.T.); +#313773 = ORIENTED_EDGE('',*,*,#313774,.T.); +#313774 = EDGE_CURVE('',#313744,#313775,#313777,.T.); +#313775 = VERTEX_POINT('',#313776); +#313776 = CARTESIAN_POINT('',(151.95,-88.778858,-3.5E-02)); +#313777 = CIRCLE('',#313778,0.274993677363); +#313778 = AXIS2_PLACEMENT_3D('',#313779,#313780,#313781); +#313779 = CARTESIAN_POINT('',(152.22499367735,-88.77885988928,-3.5E-02) + ); +#313780 = DIRECTION('',(0.,0.,-1.)); +#313781 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313782 = ORIENTED_EDGE('',*,*,#313783,.F.); +#313783 = EDGE_CURVE('',#313784,#313775,#313786,.T.); +#313784 = VERTEX_POINT('',#313785); +#313785 = CARTESIAN_POINT('',(151.95,-88.778858,0.)); +#313786 = LINE('',#313787,#313788); +#313787 = CARTESIAN_POINT('',(151.95,-88.778858,0.)); +#313788 = VECTOR('',#313789,1.); +#313789 = DIRECTION('',(0.,0.,-1.)); +#313790 = ORIENTED_EDGE('',*,*,#313791,.F.); +#313791 = EDGE_CURVE('',#313752,#313784,#313792,.T.); +#313792 = CIRCLE('',#313793,0.274993677363); +#313793 = AXIS2_PLACEMENT_3D('',#313794,#313795,#313796); +#313794 = CARTESIAN_POINT('',(152.22499367735,-88.77885988928,0.)); +#313795 = DIRECTION('',(0.,0.,-1.)); +#313796 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313797 = CYLINDRICAL_SURFACE('',#313798,0.274993677363); +#313798 = AXIS2_PLACEMENT_3D('',#313799,#313800,#313801); +#313799 = CARTESIAN_POINT('',(152.22499367735,-88.77885988928,0.)); +#313800 = DIRECTION('',(-0.,-0.,1.)); +#313801 = DIRECTION('',(-0.707098720309,-0.707114841972,-0.)); +#313802 = ADVANCED_FACE('',(#313803),#313828,.F.); +#313803 = FACE_BOUND('',#313804,.F.); +#313804 = EDGE_LOOP('',(#313805,#313806,#313814,#313822)); +#313805 = ORIENTED_EDGE('',*,*,#313783,.T.); +#313806 = ORIENTED_EDGE('',*,*,#313807,.T.); +#313807 = EDGE_CURVE('',#313775,#313808,#313810,.T.); +#313808 = VERTEX_POINT('',#313809); +#313809 = CARTESIAN_POINT('',(151.95,-87.971142,-3.5E-02)); +#313810 = LINE('',#313811,#313812); +#313811 = CARTESIAN_POINT('',(151.95,-88.778858,-3.5E-02)); +#313812 = VECTOR('',#313813,1.); +#313813 = DIRECTION('',(0.,1.,0.)); +#313814 = ORIENTED_EDGE('',*,*,#313815,.F.); +#313815 = EDGE_CURVE('',#313816,#313808,#313818,.T.); +#313816 = VERTEX_POINT('',#313817); +#313817 = CARTESIAN_POINT('',(151.95,-87.971142,0.)); +#313818 = LINE('',#313819,#313820); +#313819 = CARTESIAN_POINT('',(151.95,-87.971142,0.)); +#313820 = VECTOR('',#313821,1.); +#313821 = DIRECTION('',(0.,0.,-1.)); +#313822 = ORIENTED_EDGE('',*,*,#313823,.F.); +#313823 = EDGE_CURVE('',#313784,#313816,#313824,.T.); +#313824 = LINE('',#313825,#313826); +#313825 = CARTESIAN_POINT('',(151.95,-88.778858,0.)); +#313826 = VECTOR('',#313827,1.); +#313827 = DIRECTION('',(0.,1.,0.)); +#313828 = PLANE('',#313829); +#313829 = AXIS2_PLACEMENT_3D('',#313830,#313831,#313832); +#313830 = CARTESIAN_POINT('',(151.95,-88.778858,0.)); +#313831 = DIRECTION('',(1.,-0.,0.)); +#313832 = DIRECTION('',(0.,1.,0.)); +#313833 = ADVANCED_FACE('',(#313834),#313861,.T.); +#313834 = FACE_BOUND('',#313835,.F.); +#313835 = EDGE_LOOP('',(#313836,#313837,#313846,#313854)); +#313836 = ORIENTED_EDGE('',*,*,#313815,.T.); +#313837 = ORIENTED_EDGE('',*,*,#313838,.T.); +#313838 = EDGE_CURVE('',#313808,#313839,#313841,.T.); +#313839 = VERTEX_POINT('',#313840); +#313840 = CARTESIAN_POINT('',(152.030546,-87.776688,-3.5E-02)); +#313841 = CIRCLE('',#313842,0.27499641508); +#313842 = AXIS2_PLACEMENT_3D('',#313843,#313844,#313845); +#313843 = CARTESIAN_POINT('',(152.22499641507,-87.97114124472,-3.5E-02) + ); +#313844 = DIRECTION('',(0.,0.,-1.)); +#313845 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313846 = ORIENTED_EDGE('',*,*,#313847,.F.); +#313847 = EDGE_CURVE('',#313848,#313839,#313850,.T.); +#313848 = VERTEX_POINT('',#313849); +#313849 = CARTESIAN_POINT('',(152.030546,-87.776688,0.)); +#313850 = LINE('',#313851,#313852); +#313851 = CARTESIAN_POINT('',(152.030546,-87.776688,0.)); +#313852 = VECTOR('',#313853,1.); +#313853 = DIRECTION('',(0.,0.,-1.)); +#313854 = ORIENTED_EDGE('',*,*,#313855,.F.); +#313855 = EDGE_CURVE('',#313816,#313848,#313856,.T.); +#313856 = CIRCLE('',#313857,0.27499641508); +#313857 = AXIS2_PLACEMENT_3D('',#313858,#313859,#313860); +#313858 = CARTESIAN_POINT('',(152.22499641507,-87.97114124472,0.)); +#313859 = DIRECTION('',(0.,0.,-1.)); +#313860 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313861 = CYLINDRICAL_SURFACE('',#313862,0.27499641508); +#313862 = AXIS2_PLACEMENT_3D('',#313863,#313864,#313865); +#313863 = CARTESIAN_POINT('',(152.22499641507,-87.97114124472,0.)); +#313864 = DIRECTION('',(-0.,-0.,1.)); +#313865 = DIRECTION('',(-0.999999999996,-2.746504753271E-06,-0.)); +#313866 = ADVANCED_FACE('',(#313867),#313892,.F.); +#313867 = FACE_BOUND('',#313868,.F.); +#313868 = EDGE_LOOP('',(#313869,#313870,#313878,#313886)); +#313869 = ORIENTED_EDGE('',*,*,#313847,.T.); +#313870 = ORIENTED_EDGE('',*,*,#313871,.T.); +#313871 = EDGE_CURVE('',#313839,#313872,#313874,.T.); +#313872 = VERTEX_POINT('',#313873); +#313873 = CARTESIAN_POINT('',(152.125,-87.682233,-3.5E-02)); +#313874 = LINE('',#313875,#313876); +#313875 = CARTESIAN_POINT('',(152.030546,-87.776688,-3.5E-02)); +#313876 = VECTOR('',#313877,1.); +#313877 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313878 = ORIENTED_EDGE('',*,*,#313879,.F.); +#313879 = EDGE_CURVE('',#313880,#313872,#313882,.T.); +#313880 = VERTEX_POINT('',#313881); +#313881 = CARTESIAN_POINT('',(152.125,-87.682233,0.)); +#313882 = LINE('',#313883,#313884); +#313883 = CARTESIAN_POINT('',(152.125,-87.682233,0.)); +#313884 = VECTOR('',#313885,1.); +#313885 = DIRECTION('',(0.,0.,-1.)); +#313886 = ORIENTED_EDGE('',*,*,#313887,.F.); +#313887 = EDGE_CURVE('',#313848,#313880,#313888,.T.); +#313888 = LINE('',#313889,#313890); +#313889 = CARTESIAN_POINT('',(152.030546,-87.776688,0.)); +#313890 = VECTOR('',#313891,1.); +#313891 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313892 = PLANE('',#313893); +#313893 = AXIS2_PLACEMENT_3D('',#313894,#313895,#313896); +#313894 = CARTESIAN_POINT('',(152.030546,-87.776688,0.)); +#313895 = DIRECTION('',(0.707110524285,-0.707103038069,0.)); +#313896 = DIRECTION('',(0.707103038069,0.707110524285,0.)); +#313897 = ADVANCED_FACE('',(#313898),#313923,.F.); +#313898 = FACE_BOUND('',#313899,.F.); +#313899 = EDGE_LOOP('',(#313900,#313901,#313909,#313917)); +#313900 = ORIENTED_EDGE('',*,*,#313879,.T.); +#313901 = ORIENTED_EDGE('',*,*,#313902,.T.); +#313902 = EDGE_CURVE('',#313872,#313903,#313905,.T.); +#313903 = VERTEX_POINT('',#313904); +#313904 = CARTESIAN_POINT('',(152.125,-81.908984,-3.5E-02)); +#313905 = LINE('',#313906,#313907); +#313906 = CARTESIAN_POINT('',(152.125,-87.682233,-3.5E-02)); +#313907 = VECTOR('',#313908,1.); +#313908 = DIRECTION('',(0.,1.,0.)); +#313909 = ORIENTED_EDGE('',*,*,#313910,.F.); +#313910 = EDGE_CURVE('',#313911,#313903,#313913,.T.); +#313911 = VERTEX_POINT('',#313912); +#313912 = CARTESIAN_POINT('',(152.125,-81.908984,0.)); +#313913 = LINE('',#313914,#313915); +#313914 = CARTESIAN_POINT('',(152.125,-81.908984,0.)); +#313915 = VECTOR('',#313916,1.); +#313916 = DIRECTION('',(0.,0.,-1.)); +#313917 = ORIENTED_EDGE('',*,*,#313918,.F.); +#313918 = EDGE_CURVE('',#313880,#313911,#313919,.T.); +#313919 = LINE('',#313920,#313921); +#313920 = CARTESIAN_POINT('',(152.125,-87.682233,0.)); +#313921 = VECTOR('',#313922,1.); +#313922 = DIRECTION('',(0.,1.,0.)); +#313923 = PLANE('',#313924); +#313924 = AXIS2_PLACEMENT_3D('',#313925,#313926,#313927); +#313925 = CARTESIAN_POINT('',(152.125,-87.682233,0.)); +#313926 = DIRECTION('',(1.,-0.,0.)); +#313927 = DIRECTION('',(0.,1.,0.)); +#313928 = ADVANCED_FACE('',(#313929),#313954,.F.); +#313929 = FACE_BOUND('',#313930,.F.); +#313930 = EDGE_LOOP('',(#313931,#313932,#313940,#313948)); +#313931 = ORIENTED_EDGE('',*,*,#313910,.T.); +#313932 = ORIENTED_EDGE('',*,*,#313933,.T.); +#313933 = EDGE_CURVE('',#313903,#313934,#313936,.T.); +#313934 = VERTEX_POINT('',#313935); +#313935 = CARTESIAN_POINT('',(152.130284,-81.855334,-3.5E-02)); +#313936 = LINE('',#313937,#313938); +#313937 = CARTESIAN_POINT('',(152.125,-81.908984,-3.5E-02)); +#313938 = VECTOR('',#313939,1.); +#313939 = DIRECTION('',(9.801596841784E-02,0.995184842095,0.)); +#313940 = ORIENTED_EDGE('',*,*,#313941,.F.); +#313941 = EDGE_CURVE('',#313942,#313934,#313944,.T.); +#313942 = VERTEX_POINT('',#313943); +#313943 = CARTESIAN_POINT('',(152.130284,-81.855334,0.)); +#313944 = LINE('',#313945,#313946); +#313945 = CARTESIAN_POINT('',(152.130284,-81.855334,0.)); +#313946 = VECTOR('',#313947,1.); +#313947 = DIRECTION('',(0.,0.,-1.)); +#313948 = ORIENTED_EDGE('',*,*,#313949,.F.); +#313949 = EDGE_CURVE('',#313911,#313942,#313950,.T.); +#313950 = LINE('',#313951,#313952); +#313951 = CARTESIAN_POINT('',(152.125,-81.908984,0.)); +#313952 = VECTOR('',#313953,1.); +#313953 = DIRECTION('',(9.801596841784E-02,0.995184842095,0.)); +#313954 = PLANE('',#313955); +#313955 = AXIS2_PLACEMENT_3D('',#313956,#313957,#313958); +#313956 = CARTESIAN_POINT('',(152.125,-81.908984,0.)); +#313957 = DIRECTION('',(0.995184842095,-9.801596841784E-02,0.)); +#313958 = DIRECTION('',(9.801596841784E-02,0.995184842095,0.)); +#313959 = ADVANCED_FACE('',(#313960),#313985,.F.); +#313960 = FACE_BOUND('',#313961,.F.); +#313961 = EDGE_LOOP('',(#313962,#313963,#313971,#313979)); +#313962 = ORIENTED_EDGE('',*,*,#313941,.T.); +#313963 = ORIENTED_EDGE('',*,*,#313964,.T.); +#313964 = EDGE_CURVE('',#313934,#313965,#313967,.T.); +#313965 = VERTEX_POINT('',#313966); +#313966 = CARTESIAN_POINT('',(152.171346,-81.756202,-3.5E-02)); +#313967 = LINE('',#313968,#313969); +#313968 = CARTESIAN_POINT('',(152.130284,-81.855334,-3.5E-02)); +#313969 = VECTOR('',#313970,1.); +#313970 = DIRECTION('',(0.382684873265,0.92387893567,0.)); +#313971 = ORIENTED_EDGE('',*,*,#313972,.F.); +#313972 = EDGE_CURVE('',#313973,#313965,#313975,.T.); +#313973 = VERTEX_POINT('',#313974); +#313974 = CARTESIAN_POINT('',(152.171346,-81.756202,0.)); +#313975 = LINE('',#313976,#313977); +#313976 = CARTESIAN_POINT('',(152.171346,-81.756202,0.)); +#313977 = VECTOR('',#313978,1.); +#313978 = DIRECTION('',(0.,0.,-1.)); +#313979 = ORIENTED_EDGE('',*,*,#313980,.F.); +#313980 = EDGE_CURVE('',#313942,#313973,#313981,.T.); +#313981 = LINE('',#313982,#313983); +#313982 = CARTESIAN_POINT('',(152.130284,-81.855334,0.)); +#313983 = VECTOR('',#313984,1.); +#313984 = DIRECTION('',(0.382684873265,0.92387893567,0.)); +#313985 = PLANE('',#313986); +#313986 = AXIS2_PLACEMENT_3D('',#313987,#313988,#313989); +#313987 = CARTESIAN_POINT('',(152.130284,-81.855334,0.)); +#313988 = DIRECTION('',(0.92387893567,-0.382684873265,0.)); +#313989 = DIRECTION('',(0.382684873265,0.92387893567,0.)); +#313990 = ADVANCED_FACE('',(#313991),#314016,.F.); +#313991 = FACE_BOUND('',#313992,.F.); +#313992 = EDGE_LOOP('',(#313993,#313994,#314002,#314010)); +#313993 = ORIENTED_EDGE('',*,*,#313972,.T.); +#313994 = ORIENTED_EDGE('',*,*,#313995,.T.); +#313995 = EDGE_CURVE('',#313965,#313996,#313998,.T.); +#313996 = VERTEX_POINT('',#313997); +#313997 = CARTESIAN_POINT('',(152.225,-81.695075,-3.5E-02)); +#313998 = LINE('',#313999,#314000); +#313999 = CARTESIAN_POINT('',(152.171346,-81.756202,-3.5E-02)); +#314000 = VECTOR('',#314001,1.); +#314001 = DIRECTION('',(0.659672812161,0.751552912905,0.)); +#314002 = ORIENTED_EDGE('',*,*,#314003,.F.); +#314003 = EDGE_CURVE('',#314004,#313996,#314006,.T.); +#314004 = VERTEX_POINT('',#314005); +#314005 = CARTESIAN_POINT('',(152.225,-81.695075,0.)); +#314006 = LINE('',#314007,#314008); +#314007 = CARTESIAN_POINT('',(152.225,-81.695075,0.)); +#314008 = VECTOR('',#314009,1.); +#314009 = DIRECTION('',(0.,0.,-1.)); +#314010 = ORIENTED_EDGE('',*,*,#314011,.F.); +#314011 = EDGE_CURVE('',#313973,#314004,#314012,.T.); +#314012 = LINE('',#314013,#314014); +#314013 = CARTESIAN_POINT('',(152.171346,-81.756202,0.)); +#314014 = VECTOR('',#314015,1.); +#314015 = DIRECTION('',(0.659672812161,0.751552912905,0.)); +#314016 = PLANE('',#314017); +#314017 = AXIS2_PLACEMENT_3D('',#314018,#314019,#314020); +#314018 = CARTESIAN_POINT('',(152.171346,-81.756202,0.)); +#314019 = DIRECTION('',(0.751552912905,-0.659672812161,0.)); +#314020 = DIRECTION('',(0.659672812161,0.751552912905,0.)); +#314021 = ADVANCED_FACE('',(#314022),#314047,.F.); +#314022 = FACE_BOUND('',#314023,.F.); +#314023 = EDGE_LOOP('',(#314024,#314025,#314033,#314041)); +#314024 = ORIENTED_EDGE('',*,*,#314003,.T.); +#314025 = ORIENTED_EDGE('',*,*,#314026,.T.); +#314026 = EDGE_CURVE('',#313996,#314027,#314029,.T.); +#314027 = VERTEX_POINT('',#314028); +#314028 = CARTESIAN_POINT('',(152.225,-77.733116,-3.5E-02)); +#314029 = LINE('',#314030,#314031); +#314030 = CARTESIAN_POINT('',(152.225,-81.695075,-3.5E-02)); +#314031 = VECTOR('',#314032,1.); +#314032 = DIRECTION('',(0.,1.,0.)); +#314033 = ORIENTED_EDGE('',*,*,#314034,.F.); +#314034 = EDGE_CURVE('',#314035,#314027,#314037,.T.); +#314035 = VERTEX_POINT('',#314036); +#314036 = CARTESIAN_POINT('',(152.225,-77.733116,0.)); +#314037 = LINE('',#314038,#314039); +#314038 = CARTESIAN_POINT('',(152.225,-77.733116,0.)); +#314039 = VECTOR('',#314040,1.); +#314040 = DIRECTION('',(0.,0.,-1.)); +#314041 = ORIENTED_EDGE('',*,*,#314042,.F.); +#314042 = EDGE_CURVE('',#314004,#314035,#314043,.T.); +#314043 = LINE('',#314044,#314045); +#314044 = CARTESIAN_POINT('',(152.225,-81.695075,0.)); +#314045 = VECTOR('',#314046,1.); +#314046 = DIRECTION('',(0.,1.,0.)); +#314047 = PLANE('',#314048); +#314048 = AXIS2_PLACEMENT_3D('',#314049,#314050,#314051); +#314049 = CARTESIAN_POINT('',(152.225,-81.695075,0.)); +#314050 = DIRECTION('',(1.,-0.,0.)); +#314051 = DIRECTION('',(0.,1.,0.)); +#314052 = ADVANCED_FACE('',(#314053),#314069,.F.); +#314053 = FACE_BOUND('',#314054,.F.); +#314054 = EDGE_LOOP('',(#314055,#314056,#314062,#314063)); +#314055 = ORIENTED_EDGE('',*,*,#314034,.T.); +#314056 = ORIENTED_EDGE('',*,*,#314057,.T.); +#314057 = EDGE_CURVE('',#314027,#310638,#314058,.T.); +#314058 = LINE('',#314059,#314060); +#314059 = CARTESIAN_POINT('',(152.225,-77.733116,-3.5E-02)); +#314060 = VECTOR('',#314061,1.); +#314061 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#314062 = ORIENTED_EDGE('',*,*,#310635,.F.); +#314063 = ORIENTED_EDGE('',*,*,#314064,.F.); +#314064 = EDGE_CURVE('',#314035,#310636,#314065,.T.); +#314065 = LINE('',#314066,#314067); +#314066 = CARTESIAN_POINT('',(152.225,-77.733116,0.)); +#314067 = VECTOR('',#314068,1.); +#314068 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#314069 = PLANE('',#314070); +#314070 = AXIS2_PLACEMENT_3D('',#314071,#314072,#314073); +#314071 = CARTESIAN_POINT('',(152.225,-77.733116,0.)); +#314072 = DIRECTION('',(-0.707106781186,-0.707106781187,-0.)); +#314073 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#314074 = ADVANCED_FACE('',(#314075),#314186,.F.); +#314075 = FACE_BOUND('',#314076,.F.); +#314076 = EDGE_LOOP('',(#314077,#314078,#314079,#314080,#314081,#314082, + #314083,#314084,#314085,#314086,#314087,#314088,#314089,#314090, + #314091,#314092,#314093,#314094,#314095,#314096,#314097,#314098, + #314099,#314100,#314101,#314102,#314103,#314104,#314105,#314106, + #314107,#314108,#314109,#314110,#314111,#314112,#314113,#314114, + #314115,#314116,#314117,#314118,#314119,#314120,#314121,#314122, + #314123,#314124,#314125,#314126,#314127,#314128,#314129,#314130, + #314131,#314132,#314133,#314134,#314135,#314136,#314137,#314138, + #314139,#314140,#314141,#314142,#314143,#314144,#314145,#314146, + #314147,#314148,#314149,#314150,#314151,#314152,#314153,#314154, + #314155,#314156,#314157,#314158,#314159,#314160,#314161,#314162, + #314163,#314164,#314165,#314166,#314167,#314168,#314169,#314170, + #314171,#314172,#314173,#314174,#314175,#314176,#314177,#314178, + #314179,#314180,#314181,#314182,#314183,#314184,#314185)); +#314077 = ORIENTED_EDGE('',*,*,#310662,.T.); +#314078 = ORIENTED_EDGE('',*,*,#310694,.T.); +#314079 = ORIENTED_EDGE('',*,*,#310725,.T.); +#314080 = ORIENTED_EDGE('',*,*,#310756,.T.); +#314081 = ORIENTED_EDGE('',*,*,#310787,.T.); +#314082 = ORIENTED_EDGE('',*,*,#310818,.T.); +#314083 = ORIENTED_EDGE('',*,*,#310849,.T.); +#314084 = ORIENTED_EDGE('',*,*,#310881,.T.); +#314085 = ORIENTED_EDGE('',*,*,#310913,.T.); +#314086 = ORIENTED_EDGE('',*,*,#310944,.T.); +#314087 = ORIENTED_EDGE('',*,*,#310975,.T.); +#314088 = ORIENTED_EDGE('',*,*,#311007,.T.); +#314089 = ORIENTED_EDGE('',*,*,#311039,.T.); +#314090 = ORIENTED_EDGE('',*,*,#311071,.T.); +#314091 = ORIENTED_EDGE('',*,*,#311103,.T.); +#314092 = ORIENTED_EDGE('',*,*,#311134,.T.); +#314093 = ORIENTED_EDGE('',*,*,#311165,.T.); +#314094 = ORIENTED_EDGE('',*,*,#311197,.T.); +#314095 = ORIENTED_EDGE('',*,*,#311229,.T.); +#314096 = ORIENTED_EDGE('',*,*,#311261,.T.); +#314097 = ORIENTED_EDGE('',*,*,#311293,.T.); +#314098 = ORIENTED_EDGE('',*,*,#311324,.T.); +#314099 = ORIENTED_EDGE('',*,*,#311355,.T.); +#314100 = ORIENTED_EDGE('',*,*,#311387,.T.); +#314101 = ORIENTED_EDGE('',*,*,#311419,.T.); +#314102 = ORIENTED_EDGE('',*,*,#311451,.T.); +#314103 = ORIENTED_EDGE('',*,*,#311483,.T.); +#314104 = ORIENTED_EDGE('',*,*,#311514,.T.); +#314105 = ORIENTED_EDGE('',*,*,#311545,.T.); +#314106 = ORIENTED_EDGE('',*,*,#311577,.T.); +#314107 = ORIENTED_EDGE('',*,*,#311609,.T.); +#314108 = ORIENTED_EDGE('',*,*,#311641,.T.); +#314109 = ORIENTED_EDGE('',*,*,#311673,.T.); +#314110 = ORIENTED_EDGE('',*,*,#311704,.T.); +#314111 = ORIENTED_EDGE('',*,*,#311736,.T.); +#314112 = ORIENTED_EDGE('',*,*,#311768,.T.); +#314113 = ORIENTED_EDGE('',*,*,#311799,.T.); +#314114 = ORIENTED_EDGE('',*,*,#311830,.T.); +#314115 = ORIENTED_EDGE('',*,*,#311862,.T.); +#314116 = ORIENTED_EDGE('',*,*,#311894,.T.); +#314117 = ORIENTED_EDGE('',*,*,#311926,.T.); +#314118 = ORIENTED_EDGE('',*,*,#311958,.T.); +#314119 = ORIENTED_EDGE('',*,*,#311989,.T.); +#314120 = ORIENTED_EDGE('',*,*,#312020,.T.); +#314121 = ORIENTED_EDGE('',*,*,#312052,.T.); +#314122 = ORIENTED_EDGE('',*,*,#312084,.T.); +#314123 = ORIENTED_EDGE('',*,*,#312116,.T.); +#314124 = ORIENTED_EDGE('',*,*,#312148,.T.); +#314125 = ORIENTED_EDGE('',*,*,#312180,.T.); +#314126 = ORIENTED_EDGE('',*,*,#312212,.T.); +#314127 = ORIENTED_EDGE('',*,*,#312244,.T.); +#314128 = ORIENTED_EDGE('',*,*,#312276,.T.); +#314129 = ORIENTED_EDGE('',*,*,#312307,.T.); +#314130 = ORIENTED_EDGE('',*,*,#312338,.T.); +#314131 = ORIENTED_EDGE('',*,*,#312370,.T.); +#314132 = ORIENTED_EDGE('',*,*,#312402,.T.); +#314133 = ORIENTED_EDGE('',*,*,#312433,.T.); +#314134 = ORIENTED_EDGE('',*,*,#312465,.T.); +#314135 = ORIENTED_EDGE('',*,*,#312497,.T.); +#314136 = ORIENTED_EDGE('',*,*,#312528,.T.); +#314137 = ORIENTED_EDGE('',*,*,#312559,.T.); +#314138 = ORIENTED_EDGE('',*,*,#312590,.T.); +#314139 = ORIENTED_EDGE('',*,*,#312621,.T.); +#314140 = ORIENTED_EDGE('',*,*,#312652,.T.); +#314141 = ORIENTED_EDGE('',*,*,#312683,.T.); +#314142 = ORIENTED_EDGE('',*,*,#312714,.T.); +#314143 = ORIENTED_EDGE('',*,*,#312746,.T.); +#314144 = ORIENTED_EDGE('',*,*,#312778,.T.); +#314145 = ORIENTED_EDGE('',*,*,#312810,.T.); +#314146 = ORIENTED_EDGE('',*,*,#312842,.T.); +#314147 = ORIENTED_EDGE('',*,*,#312873,.T.); +#314148 = ORIENTED_EDGE('',*,*,#312904,.T.); +#314149 = ORIENTED_EDGE('',*,*,#312936,.T.); +#314150 = ORIENTED_EDGE('',*,*,#312968,.T.); +#314151 = ORIENTED_EDGE('',*,*,#313000,.T.); +#314152 = ORIENTED_EDGE('',*,*,#313032,.T.); +#314153 = ORIENTED_EDGE('',*,*,#313063,.T.); +#314154 = ORIENTED_EDGE('',*,*,#313095,.T.); +#314155 = ORIENTED_EDGE('',*,*,#313127,.T.); +#314156 = ORIENTED_EDGE('',*,*,#313158,.T.); +#314157 = ORIENTED_EDGE('',*,*,#313189,.T.); +#314158 = ORIENTED_EDGE('',*,*,#313221,.T.); +#314159 = ORIENTED_EDGE('',*,*,#313253,.T.); +#314160 = ORIENTED_EDGE('',*,*,#313285,.T.); +#314161 = ORIENTED_EDGE('',*,*,#313317,.T.); +#314162 = ORIENTED_EDGE('',*,*,#313348,.T.); +#314163 = ORIENTED_EDGE('',*,*,#313379,.T.); +#314164 = ORIENTED_EDGE('',*,*,#313411,.T.); +#314165 = ORIENTED_EDGE('',*,*,#313443,.T.); +#314166 = ORIENTED_EDGE('',*,*,#313475,.T.); +#314167 = ORIENTED_EDGE('',*,*,#313507,.T.); +#314168 = ORIENTED_EDGE('',*,*,#313538,.T.); +#314169 = ORIENTED_EDGE('',*,*,#313569,.T.); +#314170 = ORIENTED_EDGE('',*,*,#313601,.T.); +#314171 = ORIENTED_EDGE('',*,*,#313633,.T.); +#314172 = ORIENTED_EDGE('',*,*,#313665,.T.); +#314173 = ORIENTED_EDGE('',*,*,#313697,.T.); +#314174 = ORIENTED_EDGE('',*,*,#313728,.T.); +#314175 = ORIENTED_EDGE('',*,*,#313759,.T.); +#314176 = ORIENTED_EDGE('',*,*,#313791,.T.); +#314177 = ORIENTED_EDGE('',*,*,#313823,.T.); +#314178 = ORIENTED_EDGE('',*,*,#313855,.T.); +#314179 = ORIENTED_EDGE('',*,*,#313887,.T.); +#314180 = ORIENTED_EDGE('',*,*,#313918,.T.); +#314181 = ORIENTED_EDGE('',*,*,#313949,.T.); +#314182 = ORIENTED_EDGE('',*,*,#313980,.T.); +#314183 = ORIENTED_EDGE('',*,*,#314011,.T.); +#314184 = ORIENTED_EDGE('',*,*,#314042,.T.); +#314185 = ORIENTED_EDGE('',*,*,#314064,.T.); +#314186 = PLANE('',#314187); +#314187 = AXIS2_PLACEMENT_3D('',#314188,#314189,#314190); +#314188 = CARTESIAN_POINT('',(0.,0.,0.)); +#314189 = DIRECTION('',(-0.,-0.,-1.)); +#314190 = DIRECTION('',(-1.,0.,0.)); +#314191 = ADVANCED_FACE('',(#314192),#314303,.T.); +#314192 = FACE_BOUND('',#314193,.T.); +#314193 = EDGE_LOOP('',(#314194,#314195,#314196,#314197,#314198,#314199, + #314200,#314201,#314202,#314203,#314204,#314205,#314206,#314207, + #314208,#314209,#314210,#314211,#314212,#314213,#314214,#314215, + #314216,#314217,#314218,#314219,#314220,#314221,#314222,#314223, + #314224,#314225,#314226,#314227,#314228,#314229,#314230,#314231, + #314232,#314233,#314234,#314235,#314236,#314237,#314238,#314239, + #314240,#314241,#314242,#314243,#314244,#314245,#314246,#314247, + #314248,#314249,#314250,#314251,#314252,#314253,#314254,#314255, + #314256,#314257,#314258,#314259,#314260,#314261,#314262,#314263, + #314264,#314265,#314266,#314267,#314268,#314269,#314270,#314271, + #314272,#314273,#314274,#314275,#314276,#314277,#314278,#314279, + #314280,#314281,#314282,#314283,#314284,#314285,#314286,#314287, + #314288,#314289,#314290,#314291,#314292,#314293,#314294,#314295, + #314296,#314297,#314298,#314299,#314300,#314301,#314302)); +#314194 = ORIENTED_EDGE('',*,*,#310645,.T.); +#314195 = ORIENTED_EDGE('',*,*,#310678,.T.); +#314196 = ORIENTED_EDGE('',*,*,#310709,.T.); +#314197 = ORIENTED_EDGE('',*,*,#310740,.T.); +#314198 = ORIENTED_EDGE('',*,*,#310771,.T.); +#314199 = ORIENTED_EDGE('',*,*,#310802,.T.); +#314200 = ORIENTED_EDGE('',*,*,#310833,.T.); +#314201 = ORIENTED_EDGE('',*,*,#310864,.T.); +#314202 = ORIENTED_EDGE('',*,*,#310897,.T.); +#314203 = ORIENTED_EDGE('',*,*,#310928,.T.); +#314204 = ORIENTED_EDGE('',*,*,#310959,.T.); +#314205 = ORIENTED_EDGE('',*,*,#310990,.T.); +#314206 = ORIENTED_EDGE('',*,*,#311023,.T.); +#314207 = ORIENTED_EDGE('',*,*,#311054,.T.); +#314208 = ORIENTED_EDGE('',*,*,#311087,.T.); +#314209 = ORIENTED_EDGE('',*,*,#311118,.T.); +#314210 = ORIENTED_EDGE('',*,*,#311149,.T.); +#314211 = ORIENTED_EDGE('',*,*,#311180,.T.); +#314212 = ORIENTED_EDGE('',*,*,#311213,.T.); +#314213 = ORIENTED_EDGE('',*,*,#311244,.T.); +#314214 = ORIENTED_EDGE('',*,*,#311277,.T.); +#314215 = ORIENTED_EDGE('',*,*,#311308,.T.); +#314216 = ORIENTED_EDGE('',*,*,#311339,.T.); +#314217 = ORIENTED_EDGE('',*,*,#311370,.T.); +#314218 = ORIENTED_EDGE('',*,*,#311403,.T.); +#314219 = ORIENTED_EDGE('',*,*,#311434,.T.); +#314220 = ORIENTED_EDGE('',*,*,#311467,.T.); +#314221 = ORIENTED_EDGE('',*,*,#311498,.T.); +#314222 = ORIENTED_EDGE('',*,*,#311529,.T.); +#314223 = ORIENTED_EDGE('',*,*,#311560,.T.); +#314224 = ORIENTED_EDGE('',*,*,#311593,.T.); +#314225 = ORIENTED_EDGE('',*,*,#311624,.T.); +#314226 = ORIENTED_EDGE('',*,*,#311657,.T.); +#314227 = ORIENTED_EDGE('',*,*,#311688,.T.); +#314228 = ORIENTED_EDGE('',*,*,#311719,.T.); +#314229 = ORIENTED_EDGE('',*,*,#311752,.T.); +#314230 = ORIENTED_EDGE('',*,*,#311783,.T.); +#314231 = ORIENTED_EDGE('',*,*,#311814,.T.); +#314232 = ORIENTED_EDGE('',*,*,#311845,.T.); +#314233 = ORIENTED_EDGE('',*,*,#311878,.T.); +#314234 = ORIENTED_EDGE('',*,*,#311909,.T.); +#314235 = ORIENTED_EDGE('',*,*,#311942,.T.); +#314236 = ORIENTED_EDGE('',*,*,#311973,.T.); +#314237 = ORIENTED_EDGE('',*,*,#312004,.T.); +#314238 = ORIENTED_EDGE('',*,*,#312035,.T.); +#314239 = ORIENTED_EDGE('',*,*,#312068,.T.); +#314240 = ORIENTED_EDGE('',*,*,#312099,.T.); +#314241 = ORIENTED_EDGE('',*,*,#312132,.T.); +#314242 = ORIENTED_EDGE('',*,*,#312163,.T.); +#314243 = ORIENTED_EDGE('',*,*,#312196,.T.); +#314244 = ORIENTED_EDGE('',*,*,#312227,.T.); +#314245 = ORIENTED_EDGE('',*,*,#312260,.T.); +#314246 = ORIENTED_EDGE('',*,*,#312291,.T.); +#314247 = ORIENTED_EDGE('',*,*,#312322,.T.); +#314248 = ORIENTED_EDGE('',*,*,#312353,.T.); +#314249 = ORIENTED_EDGE('',*,*,#312386,.T.); +#314250 = ORIENTED_EDGE('',*,*,#312417,.T.); +#314251 = ORIENTED_EDGE('',*,*,#312448,.T.); +#314252 = ORIENTED_EDGE('',*,*,#312481,.T.); +#314253 = ORIENTED_EDGE('',*,*,#312512,.T.); +#314254 = ORIENTED_EDGE('',*,*,#312543,.T.); +#314255 = ORIENTED_EDGE('',*,*,#312574,.T.); +#314256 = ORIENTED_EDGE('',*,*,#312605,.T.); +#314257 = ORIENTED_EDGE('',*,*,#312636,.T.); +#314258 = ORIENTED_EDGE('',*,*,#312667,.T.); +#314259 = ORIENTED_EDGE('',*,*,#312698,.T.); +#314260 = ORIENTED_EDGE('',*,*,#312729,.T.); +#314261 = ORIENTED_EDGE('',*,*,#312762,.T.); +#314262 = ORIENTED_EDGE('',*,*,#312793,.T.); +#314263 = ORIENTED_EDGE('',*,*,#312826,.T.); +#314264 = ORIENTED_EDGE('',*,*,#312857,.T.); +#314265 = ORIENTED_EDGE('',*,*,#312888,.T.); +#314266 = ORIENTED_EDGE('',*,*,#312919,.T.); +#314267 = ORIENTED_EDGE('',*,*,#312952,.T.); +#314268 = ORIENTED_EDGE('',*,*,#312983,.T.); +#314269 = ORIENTED_EDGE('',*,*,#313016,.T.); +#314270 = ORIENTED_EDGE('',*,*,#313047,.T.); +#314271 = ORIENTED_EDGE('',*,*,#313078,.T.); +#314272 = ORIENTED_EDGE('',*,*,#313111,.T.); +#314273 = ORIENTED_EDGE('',*,*,#313142,.T.); +#314274 = ORIENTED_EDGE('',*,*,#313173,.T.); +#314275 = ORIENTED_EDGE('',*,*,#313204,.T.); +#314276 = ORIENTED_EDGE('',*,*,#313237,.T.); +#314277 = ORIENTED_EDGE('',*,*,#313268,.T.); +#314278 = ORIENTED_EDGE('',*,*,#313301,.T.); +#314279 = ORIENTED_EDGE('',*,*,#313332,.T.); +#314280 = ORIENTED_EDGE('',*,*,#313363,.T.); +#314281 = ORIENTED_EDGE('',*,*,#313394,.T.); +#314282 = ORIENTED_EDGE('',*,*,#313427,.T.); +#314283 = ORIENTED_EDGE('',*,*,#313458,.T.); +#314284 = ORIENTED_EDGE('',*,*,#313491,.T.); +#314285 = ORIENTED_EDGE('',*,*,#313522,.T.); +#314286 = ORIENTED_EDGE('',*,*,#313553,.T.); +#314287 = ORIENTED_EDGE('',*,*,#313584,.T.); +#314288 = ORIENTED_EDGE('',*,*,#313617,.T.); +#314289 = ORIENTED_EDGE('',*,*,#313648,.T.); +#314290 = ORIENTED_EDGE('',*,*,#313681,.T.); +#314291 = ORIENTED_EDGE('',*,*,#313712,.T.); +#314292 = ORIENTED_EDGE('',*,*,#313743,.T.); +#314293 = ORIENTED_EDGE('',*,*,#313774,.T.); +#314294 = ORIENTED_EDGE('',*,*,#313807,.T.); +#314295 = ORIENTED_EDGE('',*,*,#313838,.T.); +#314296 = ORIENTED_EDGE('',*,*,#313871,.T.); +#314297 = ORIENTED_EDGE('',*,*,#313902,.T.); +#314298 = ORIENTED_EDGE('',*,*,#313933,.T.); +#314299 = ORIENTED_EDGE('',*,*,#313964,.T.); +#314300 = ORIENTED_EDGE('',*,*,#313995,.T.); +#314301 = ORIENTED_EDGE('',*,*,#314026,.T.); +#314302 = ORIENTED_EDGE('',*,*,#314057,.T.); +#314303 = PLANE('',#314304); +#314304 = AXIS2_PLACEMENT_3D('',#314305,#314306,#314307); +#314305 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#314306 = DIRECTION('',(-0.,-0.,-1.)); +#314307 = DIRECTION('',(-1.,0.,0.)); +#314308 = MANIFOLD_SOLID_BREP('',#314309); +#314309 = CLOSED_SHELL('',(#314310,#314352,#314383,#314414,#314445, + #314478,#314509,#314540,#314571,#314602,#314633,#314655,#314688, + #314710)); +#314310 = ADVANCED_FACE('',(#314311),#314347,.T.); +#314311 = FACE_BOUND('',#314312,.T.); +#314312 = EDGE_LOOP('',(#314313,#314323,#314332,#314340)); +#314313 = ORIENTED_EDGE('',*,*,#314314,.T.); +#314314 = EDGE_CURVE('',#314315,#314317,#314319,.T.); +#314315 = VERTEX_POINT('',#314316); +#314316 = CARTESIAN_POINT('',(134.994443,-152.971853,1.51)); +#314317 = VERTEX_POINT('',#314318); +#314318 = CARTESIAN_POINT('',(134.994443,-152.971853,1.545)); +#314319 = LINE('',#314320,#314321); +#314320 = CARTESIAN_POINT('',(134.994443,-152.971853,1.51)); +#314321 = VECTOR('',#314322,1.); +#314322 = DIRECTION('',(0.,0.,1.)); +#314323 = ORIENTED_EDGE('',*,*,#314324,.T.); +#314324 = EDGE_CURVE('',#314317,#314325,#314327,.T.); +#314325 = VERTEX_POINT('',#314326); +#314326 = CARTESIAN_POINT('',(135.148079,-153.035491,1.545)); +#314327 = CIRCLE('',#314328,0.100000590676); +#314328 = AXIS2_PLACEMENT_3D('',#314329,#314330,#314331); +#314329 = CARTESIAN_POINT('',(135.05,-153.0550006871,1.545)); +#314330 = DIRECTION('',(0.,0.,-1.)); +#314331 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314332 = ORIENTED_EDGE('',*,*,#314333,.F.); +#314333 = EDGE_CURVE('',#314334,#314325,#314336,.T.); +#314334 = VERTEX_POINT('',#314335); +#314335 = CARTESIAN_POINT('',(135.148079,-153.035491,1.51)); +#314336 = LINE('',#314337,#314338); +#314337 = CARTESIAN_POINT('',(135.148079,-153.035491,1.51)); +#314338 = VECTOR('',#314339,1.); +#314339 = DIRECTION('',(0.,0.,1.)); +#314340 = ORIENTED_EDGE('',*,*,#314341,.F.); +#314341 = EDGE_CURVE('',#314315,#314334,#314342,.T.); +#314342 = CIRCLE('',#314343,0.100000590676); +#314343 = AXIS2_PLACEMENT_3D('',#314344,#314345,#314346); +#314344 = CARTESIAN_POINT('',(135.05,-153.0550006871,1.51)); +#314345 = DIRECTION('',(0.,0.,-1.)); +#314346 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314347 = CYLINDRICAL_SURFACE('',#314348,0.100000590676); +#314348 = AXIS2_PLACEMENT_3D('',#314349,#314350,#314351); +#314349 = CARTESIAN_POINT('',(135.05,-153.0550006871,1.51)); +#314350 = DIRECTION('',(0.,0.,-1.)); +#314351 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314352 = ADVANCED_FACE('',(#314353),#314378,.T.); +#314353 = FACE_BOUND('',#314354,.T.); +#314354 = EDGE_LOOP('',(#314355,#314356,#314364,#314372)); +#314355 = ORIENTED_EDGE('',*,*,#314333,.T.); +#314356 = ORIENTED_EDGE('',*,*,#314357,.T.); +#314357 = EDGE_CURVE('',#314325,#314358,#314360,.T.); +#314358 = VERTEX_POINT('',#314359); +#314359 = CARTESIAN_POINT('',(135.15,-153.782263,1.545)); +#314360 = LINE('',#314361,#314362); +#314361 = CARTESIAN_POINT('',(135.148079,-153.035491,1.545)); +#314362 = VECTOR('',#314363,1.); +#314363 = DIRECTION('',(2.57239645321E-03,-0.999996691383,0.)); +#314364 = ORIENTED_EDGE('',*,*,#314365,.F.); +#314365 = EDGE_CURVE('',#314366,#314358,#314368,.T.); +#314366 = VERTEX_POINT('',#314367); +#314367 = CARTESIAN_POINT('',(135.15,-153.782263,1.51)); +#314368 = LINE('',#314369,#314370); +#314369 = CARTESIAN_POINT('',(135.15,-153.782263,1.51)); +#314370 = VECTOR('',#314371,1.); +#314371 = DIRECTION('',(0.,0.,1.)); +#314372 = ORIENTED_EDGE('',*,*,#314373,.F.); +#314373 = EDGE_CURVE('',#314334,#314366,#314374,.T.); +#314374 = LINE('',#314375,#314376); +#314375 = CARTESIAN_POINT('',(135.148079,-153.035491,1.51)); +#314376 = VECTOR('',#314377,1.); +#314377 = DIRECTION('',(2.57239645321E-03,-0.999996691383,0.)); +#314378 = PLANE('',#314379); +#314379 = AXIS2_PLACEMENT_3D('',#314380,#314381,#314382); +#314380 = CARTESIAN_POINT('',(135.148079,-153.035491,1.51)); +#314381 = DIRECTION('',(0.999996691383,2.57239645321E-03,-0.)); +#314382 = DIRECTION('',(2.57239645321E-03,-0.999996691383,0.)); +#314383 = ADVANCED_FACE('',(#314384),#314409,.T.); +#314384 = FACE_BOUND('',#314385,.T.); +#314385 = EDGE_LOOP('',(#314386,#314387,#314395,#314403)); +#314386 = ORIENTED_EDGE('',*,*,#314365,.T.); +#314387 = ORIENTED_EDGE('',*,*,#314388,.T.); +#314388 = EDGE_CURVE('',#314358,#314389,#314391,.T.); +#314389 = VERTEX_POINT('',#314390); +#314390 = CARTESIAN_POINT('',(135.342019,-153.974282,1.545)); +#314391 = LINE('',#314392,#314393); +#314392 = CARTESIAN_POINT('',(135.15,-153.782263,1.545)); +#314393 = VECTOR('',#314394,1.); +#314394 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#314395 = ORIENTED_EDGE('',*,*,#314396,.F.); +#314396 = EDGE_CURVE('',#314397,#314389,#314399,.T.); +#314397 = VERTEX_POINT('',#314398); +#314398 = CARTESIAN_POINT('',(135.342019,-153.974282,1.51)); +#314399 = LINE('',#314400,#314401); +#314400 = CARTESIAN_POINT('',(135.342019,-153.974282,1.51)); +#314401 = VECTOR('',#314402,1.); +#314402 = DIRECTION('',(0.,0.,1.)); +#314403 = ORIENTED_EDGE('',*,*,#314404,.F.); +#314404 = EDGE_CURVE('',#314366,#314397,#314405,.T.); +#314405 = LINE('',#314406,#314407); +#314406 = CARTESIAN_POINT('',(135.15,-153.782263,1.51)); +#314407 = VECTOR('',#314408,1.); +#314408 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#314409 = PLANE('',#314410); +#314410 = AXIS2_PLACEMENT_3D('',#314411,#314412,#314413); +#314411 = CARTESIAN_POINT('',(135.15,-153.782263,1.51)); +#314412 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#314413 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#314414 = ADVANCED_FACE('',(#314415),#314440,.T.); +#314415 = FACE_BOUND('',#314416,.T.); +#314416 = EDGE_LOOP('',(#314417,#314418,#314426,#314434)); +#314417 = ORIENTED_EDGE('',*,*,#314396,.T.); +#314418 = ORIENTED_EDGE('',*,*,#314419,.T.); +#314419 = EDGE_CURVE('',#314389,#314420,#314422,.T.); +#314420 = VERTEX_POINT('',#314421); +#314421 = CARTESIAN_POINT('',(135.355293,-153.966619,1.545)); +#314422 = LINE('',#314423,#314424); +#314423 = CARTESIAN_POINT('',(135.342019,-153.974282,1.545)); +#314424 = VECTOR('',#314425,1.); +#314425 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#314426 = ORIENTED_EDGE('',*,*,#314427,.F.); +#314427 = EDGE_CURVE('',#314428,#314420,#314430,.T.); +#314428 = VERTEX_POINT('',#314429); +#314429 = CARTESIAN_POINT('',(135.355293,-153.966619,1.51)); +#314430 = LINE('',#314431,#314432); +#314431 = CARTESIAN_POINT('',(135.355293,-153.966619,1.51)); +#314432 = VECTOR('',#314433,1.); +#314433 = DIRECTION('',(0.,0.,1.)); +#314434 = ORIENTED_EDGE('',*,*,#314435,.F.); +#314435 = EDGE_CURVE('',#314397,#314428,#314436,.T.); +#314436 = LINE('',#314437,#314438); +#314437 = CARTESIAN_POINT('',(135.342019,-153.974282,1.51)); +#314438 = VECTOR('',#314439,1.); +#314439 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#314440 = PLANE('',#314441); +#314441 = AXIS2_PLACEMENT_3D('',#314442,#314443,#314444); +#314442 = CARTESIAN_POINT('',(135.342019,-153.974282,1.51)); +#314443 = DIRECTION('',(-0.499963423545,0.866046520181,0.)); +#314444 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#314445 = ADVANCED_FACE('',(#314446),#314473,.T.); +#314446 = FACE_BOUND('',#314447,.T.); +#314447 = EDGE_LOOP('',(#314448,#314449,#314458,#314466)); +#314448 = ORIENTED_EDGE('',*,*,#314427,.T.); +#314449 = ORIENTED_EDGE('',*,*,#314450,.T.); +#314450 = EDGE_CURVE('',#314420,#314451,#314453,.T.); +#314451 = VERTEX_POINT('',#314452); +#314452 = CARTESIAN_POINT('',(135.192934,-154.128978,1.545)); +#314453 = CIRCLE('',#314454,0.299999934501); +#314454 = AXIS2_PLACEMENT_3D('',#314455,#314456,#314457); +#314455 = CARTESIAN_POINT('',(135.4700978594,-154.2437828594,1.545)); +#314456 = DIRECTION('',(-0.,0.,-1.)); +#314457 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#314458 = ORIENTED_EDGE('',*,*,#314459,.F.); +#314459 = EDGE_CURVE('',#314460,#314451,#314462,.T.); +#314460 = VERTEX_POINT('',#314461); +#314461 = CARTESIAN_POINT('',(135.192934,-154.128978,1.51)); +#314462 = LINE('',#314463,#314464); +#314463 = CARTESIAN_POINT('',(135.192934,-154.128978,1.51)); +#314464 = VECTOR('',#314465,1.); +#314465 = DIRECTION('',(0.,0.,1.)); +#314466 = ORIENTED_EDGE('',*,*,#314467,.F.); +#314467 = EDGE_CURVE('',#314428,#314460,#314468,.T.); +#314468 = CIRCLE('',#314469,0.299999934501); +#314469 = AXIS2_PLACEMENT_3D('',#314470,#314471,#314472); +#314470 = CARTESIAN_POINT('',(135.4700978594,-154.2437828594,1.51)); +#314471 = DIRECTION('',(-0.,0.,-1.)); +#314472 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#314473 = CYLINDRICAL_SURFACE('',#314474,0.299999934501); +#314474 = AXIS2_PLACEMENT_3D('',#314475,#314476,#314477); +#314475 = CARTESIAN_POINT('',(135.4700978594,-154.2437828594,1.51)); +#314476 = DIRECTION('',(-0.,0.,-1.)); +#314477 = DIRECTION('',(-0.382682948223,0.923879733049,0.)); +#314478 = ADVANCED_FACE('',(#314479),#314504,.T.); +#314479 = FACE_BOUND('',#314480,.T.); +#314480 = EDGE_LOOP('',(#314481,#314482,#314490,#314498)); +#314481 = ORIENTED_EDGE('',*,*,#314459,.T.); +#314482 = ORIENTED_EDGE('',*,*,#314483,.T.); +#314483 = EDGE_CURVE('',#314451,#314484,#314486,.T.); +#314484 = VERTEX_POINT('',#314485); +#314485 = CARTESIAN_POINT('',(135.200597,-154.115704,1.545)); +#314486 = LINE('',#314487,#314488); +#314487 = CARTESIAN_POINT('',(135.192934,-154.128978,1.545)); +#314488 = VECTOR('',#314489,1.); +#314489 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#314490 = ORIENTED_EDGE('',*,*,#314491,.F.); +#314491 = EDGE_CURVE('',#314492,#314484,#314494,.T.); +#314492 = VERTEX_POINT('',#314493); +#314493 = CARTESIAN_POINT('',(135.200597,-154.115704,1.51)); +#314494 = LINE('',#314495,#314496); +#314495 = CARTESIAN_POINT('',(135.200597,-154.115704,1.51)); +#314496 = VECTOR('',#314497,1.); +#314497 = DIRECTION('',(0.,0.,1.)); +#314498 = ORIENTED_EDGE('',*,*,#314499,.F.); +#314499 = EDGE_CURVE('',#314460,#314492,#314500,.T.); +#314500 = LINE('',#314501,#314502); +#314501 = CARTESIAN_POINT('',(135.192934,-154.128978,1.51)); +#314502 = VECTOR('',#314503,1.); +#314503 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#314504 = PLANE('',#314505); +#314505 = AXIS2_PLACEMENT_3D('',#314506,#314507,#314508); +#314506 = CARTESIAN_POINT('',(135.192934,-154.128978,1.51)); +#314507 = DIRECTION('',(-0.866046520181,0.499963423545,0.)); +#314508 = DIRECTION('',(0.499963423545,0.866046520181,0.)); +#314509 = ADVANCED_FACE('',(#314510),#314535,.T.); +#314510 = FACE_BOUND('',#314511,.T.); +#314511 = EDGE_LOOP('',(#314512,#314513,#314521,#314529)); +#314512 = ORIENTED_EDGE('',*,*,#314491,.T.); +#314513 = ORIENTED_EDGE('',*,*,#314514,.T.); +#314514 = EDGE_CURVE('',#314484,#314515,#314517,.T.); +#314515 = VERTEX_POINT('',#314516); +#314516 = CARTESIAN_POINT('',(134.966853,-153.879242,1.545)); +#314517 = LINE('',#314518,#314519); +#314518 = CARTESIAN_POINT('',(135.200597,-154.115704,1.545)); +#314519 = VECTOR('',#314520,1.); +#314520 = DIRECTION('',(-0.70300764432,0.7111822917,0.)); +#314521 = ORIENTED_EDGE('',*,*,#314522,.F.); +#314522 = EDGE_CURVE('',#314523,#314515,#314525,.T.); +#314523 = VERTEX_POINT('',#314524); +#314524 = CARTESIAN_POINT('',(134.966853,-153.879242,1.51)); +#314525 = LINE('',#314526,#314527); +#314526 = CARTESIAN_POINT('',(134.966853,-153.879242,1.51)); +#314527 = VECTOR('',#314528,1.); +#314528 = DIRECTION('',(0.,0.,1.)); +#314529 = ORIENTED_EDGE('',*,*,#314530,.F.); +#314530 = EDGE_CURVE('',#314492,#314523,#314531,.T.); +#314531 = LINE('',#314532,#314533); +#314532 = CARTESIAN_POINT('',(135.200597,-154.115704,1.51)); +#314533 = VECTOR('',#314534,1.); +#314534 = DIRECTION('',(-0.70300764432,0.7111822917,0.)); +#314535 = PLANE('',#314536); +#314536 = AXIS2_PLACEMENT_3D('',#314537,#314538,#314539); +#314537 = CARTESIAN_POINT('',(135.200597,-154.115704,1.51)); +#314538 = DIRECTION('',(-0.7111822917,-0.70300764432,0.)); +#314539 = DIRECTION('',(-0.70300764432,0.7111822917,0.)); +#314540 = ADVANCED_FACE('',(#314541),#314566,.T.); +#314541 = FACE_BOUND('',#314542,.T.); +#314542 = EDGE_LOOP('',(#314543,#314544,#314552,#314560)); +#314543 = ORIENTED_EDGE('',*,*,#314522,.T.); +#314544 = ORIENTED_EDGE('',*,*,#314545,.T.); +#314545 = EDGE_CURVE('',#314515,#314546,#314548,.T.); +#314546 = VERTEX_POINT('',#314547); +#314547 = CARTESIAN_POINT('',(134.951921,-153.843194,1.545)); +#314548 = LINE('',#314549,#314550); +#314549 = CARTESIAN_POINT('',(134.966853,-153.879242,1.545)); +#314550 = VECTOR('',#314551,1.); +#314551 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#314552 = ORIENTED_EDGE('',*,*,#314553,.F.); +#314553 = EDGE_CURVE('',#314554,#314546,#314556,.T.); +#314554 = VERTEX_POINT('',#314555); +#314555 = CARTESIAN_POINT('',(134.951921,-153.843194,1.51)); +#314556 = LINE('',#314557,#314558); +#314557 = CARTESIAN_POINT('',(134.951921,-153.843194,1.51)); +#314558 = VECTOR('',#314559,1.); +#314559 = DIRECTION('',(0.,0.,1.)); +#314560 = ORIENTED_EDGE('',*,*,#314561,.F.); +#314561 = EDGE_CURVE('',#314523,#314554,#314562,.T.); +#314562 = LINE('',#314563,#314564); +#314563 = CARTESIAN_POINT('',(134.966853,-153.879242,1.51)); +#314564 = VECTOR('',#314565,1.); +#314565 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#314566 = PLANE('',#314567); +#314567 = AXIS2_PLACEMENT_3D('',#314568,#314569,#314570); +#314568 = CARTESIAN_POINT('',(134.966853,-153.879242,1.51)); +#314569 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#314570 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#314571 = ADVANCED_FACE('',(#314572),#314597,.T.); +#314572 = FACE_BOUND('',#314573,.T.); +#314573 = EDGE_LOOP('',(#314574,#314575,#314583,#314591)); +#314574 = ORIENTED_EDGE('',*,*,#314553,.T.); +#314575 = ORIENTED_EDGE('',*,*,#314576,.T.); +#314576 = EDGE_CURVE('',#314546,#314577,#314579,.T.); +#314577 = VERTEX_POINT('',#314578); +#314578 = CARTESIAN_POINT('',(134.951921,-153.035491,1.545)); +#314579 = LINE('',#314580,#314581); +#314580 = CARTESIAN_POINT('',(134.951921,-153.843194,1.545)); +#314581 = VECTOR('',#314582,1.); +#314582 = DIRECTION('',(0.,1.,0.)); +#314583 = ORIENTED_EDGE('',*,*,#314584,.F.); +#314584 = EDGE_CURVE('',#314585,#314577,#314587,.T.); +#314585 = VERTEX_POINT('',#314586); +#314586 = CARTESIAN_POINT('',(134.951921,-153.035491,1.51)); +#314587 = LINE('',#314588,#314589); +#314588 = CARTESIAN_POINT('',(134.951921,-153.035491,1.51)); +#314589 = VECTOR('',#314590,1.); +#314590 = DIRECTION('',(0.,0.,1.)); +#314591 = ORIENTED_EDGE('',*,*,#314592,.F.); +#314592 = EDGE_CURVE('',#314554,#314585,#314593,.T.); +#314593 = LINE('',#314594,#314595); +#314594 = CARTESIAN_POINT('',(134.951921,-153.843194,1.51)); +#314595 = VECTOR('',#314596,1.); +#314596 = DIRECTION('',(0.,1.,0.)); +#314597 = PLANE('',#314598); +#314598 = AXIS2_PLACEMENT_3D('',#314599,#314600,#314601); +#314599 = CARTESIAN_POINT('',(134.951921,-153.843194,1.51)); +#314600 = DIRECTION('',(-1.,0.,0.)); +#314601 = DIRECTION('',(0.,1.,0.)); +#314602 = ADVANCED_FACE('',(#314603),#314628,.T.); +#314603 = FACE_BOUND('',#314604,.T.); +#314604 = EDGE_LOOP('',(#314605,#314606,#314614,#314622)); +#314605 = ORIENTED_EDGE('',*,*,#314584,.T.); +#314606 = ORIENTED_EDGE('',*,*,#314607,.T.); +#314607 = EDGE_CURVE('',#314577,#314608,#314610,.T.); +#314608 = VERTEX_POINT('',#314609); +#314609 = CARTESIAN_POINT('',(134.966853,-152.999443,1.545)); +#314610 = LINE('',#314611,#314612); +#314611 = CARTESIAN_POINT('',(134.951921,-153.035491,1.545)); +#314612 = VECTOR('',#314613,1.); +#314613 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#314614 = ORIENTED_EDGE('',*,*,#314615,.F.); +#314615 = EDGE_CURVE('',#314616,#314608,#314618,.T.); +#314616 = VERTEX_POINT('',#314617); +#314617 = CARTESIAN_POINT('',(134.966853,-152.999443,1.51)); +#314618 = LINE('',#314619,#314620); +#314619 = CARTESIAN_POINT('',(134.966853,-152.999443,1.51)); +#314620 = VECTOR('',#314621,1.); +#314621 = DIRECTION('',(0.,0.,1.)); +#314622 = ORIENTED_EDGE('',*,*,#314623,.F.); +#314623 = EDGE_CURVE('',#314585,#314616,#314624,.T.); +#314624 = LINE('',#314625,#314626); +#314625 = CARTESIAN_POINT('',(134.951921,-153.035491,1.51)); +#314626 = VECTOR('',#314627,1.); +#314627 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#314628 = PLANE('',#314629); +#314629 = AXIS2_PLACEMENT_3D('',#314630,#314631,#314632); +#314630 = CARTESIAN_POINT('',(134.951921,-153.035491,1.51)); +#314631 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#314632 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#314633 = ADVANCED_FACE('',(#314634),#314650,.T.); +#314634 = FACE_BOUND('',#314635,.T.); +#314635 = EDGE_LOOP('',(#314636,#314637,#314643,#314644)); +#314636 = ORIENTED_EDGE('',*,*,#314615,.T.); +#314637 = ORIENTED_EDGE('',*,*,#314638,.T.); +#314638 = EDGE_CURVE('',#314608,#314317,#314639,.T.); +#314639 = LINE('',#314640,#314641); +#314640 = CARTESIAN_POINT('',(134.966853,-152.999443,1.545)); +#314641 = VECTOR('',#314642,1.); +#314642 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#314643 = ORIENTED_EDGE('',*,*,#314314,.F.); +#314644 = ORIENTED_EDGE('',*,*,#314645,.F.); +#314645 = EDGE_CURVE('',#314616,#314315,#314646,.T.); +#314646 = LINE('',#314647,#314648); +#314647 = CARTESIAN_POINT('',(134.966853,-152.999443,1.51)); +#314648 = VECTOR('',#314649,1.); +#314649 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#314650 = PLANE('',#314651); +#314651 = AXIS2_PLACEMENT_3D('',#314652,#314653,#314654); +#314652 = CARTESIAN_POINT('',(134.966853,-152.999443,1.51)); +#314653 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#314654 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#314655 = ADVANCED_FACE('',(#314656),#314683,.F.); +#314656 = FACE_BOUND('',#314657,.T.); +#314657 = EDGE_LOOP('',(#314658,#314668,#314675,#314676)); +#314658 = ORIENTED_EDGE('',*,*,#314659,.T.); +#314659 = EDGE_CURVE('',#314660,#314662,#314664,.T.); +#314660 = VERTEX_POINT('',#314661); +#314661 = CARTESIAN_POINT('',(135.607353,-154.243783,1.51)); +#314662 = VERTEX_POINT('',#314663); +#314663 = CARTESIAN_POINT('',(135.607353,-154.243783,1.545)); +#314664 = LINE('',#314665,#314666); +#314665 = CARTESIAN_POINT('',(135.607353,-154.243783,1.51)); +#314666 = VECTOR('',#314667,1.); +#314667 = DIRECTION('',(0.,0.,1.)); +#314668 = ORIENTED_EDGE('',*,*,#314669,.T.); +#314669 = EDGE_CURVE('',#314662,#314662,#314670,.T.); +#314670 = CIRCLE('',#314671,0.137255); +#314671 = AXIS2_PLACEMENT_3D('',#314672,#314673,#314674); +#314672 = CARTESIAN_POINT('',(135.470098,-154.243783,1.545)); +#314673 = DIRECTION('',(0.,0.,1.)); +#314674 = DIRECTION('',(1.,0.,-0.)); +#314675 = ORIENTED_EDGE('',*,*,#314659,.F.); +#314676 = ORIENTED_EDGE('',*,*,#314677,.F.); +#314677 = EDGE_CURVE('',#314660,#314660,#314678,.T.); +#314678 = CIRCLE('',#314679,0.137255); +#314679 = AXIS2_PLACEMENT_3D('',#314680,#314681,#314682); +#314680 = CARTESIAN_POINT('',(135.470098,-154.243783,1.51)); +#314681 = DIRECTION('',(0.,0.,1.)); +#314682 = DIRECTION('',(1.,0.,-0.)); +#314683 = CYLINDRICAL_SURFACE('',#314684,0.137255); +#314684 = AXIS2_PLACEMENT_3D('',#314685,#314686,#314687); +#314685 = CARTESIAN_POINT('',(135.470098,-154.243783,1.51)); +#314686 = DIRECTION('',(-0.,-0.,-1.)); +#314687 = DIRECTION('',(1.,0.,-0.)); +#314688 = ADVANCED_FACE('',(#314689,#314702),#314705,.F.); +#314689 = FACE_BOUND('',#314690,.T.); +#314690 = EDGE_LOOP('',(#314691,#314692,#314693,#314694,#314695,#314696, + #314697,#314698,#314699,#314700,#314701)); +#314691 = ORIENTED_EDGE('',*,*,#314341,.T.); +#314692 = ORIENTED_EDGE('',*,*,#314373,.T.); +#314693 = ORIENTED_EDGE('',*,*,#314404,.T.); +#314694 = ORIENTED_EDGE('',*,*,#314435,.T.); +#314695 = ORIENTED_EDGE('',*,*,#314467,.T.); +#314696 = ORIENTED_EDGE('',*,*,#314499,.T.); +#314697 = ORIENTED_EDGE('',*,*,#314530,.T.); +#314698 = ORIENTED_EDGE('',*,*,#314561,.T.); +#314699 = ORIENTED_EDGE('',*,*,#314592,.T.); +#314700 = ORIENTED_EDGE('',*,*,#314623,.T.); +#314701 = ORIENTED_EDGE('',*,*,#314645,.T.); +#314702 = FACE_BOUND('',#314703,.T.); +#314703 = EDGE_LOOP('',(#314704)); +#314704 = ORIENTED_EDGE('',*,*,#314677,.T.); +#314705 = PLANE('',#314706); +#314706 = AXIS2_PLACEMENT_3D('',#314707,#314708,#314709); +#314707 = CARTESIAN_POINT('',(0.,0.,1.51)); +#314708 = DIRECTION('',(0.,0.,1.)); +#314709 = DIRECTION('',(1.,0.,-0.)); +#314710 = ADVANCED_FACE('',(#314711,#314724),#314727,.T.); +#314711 = FACE_BOUND('',#314712,.F.); +#314712 = EDGE_LOOP('',(#314713,#314714,#314715,#314716,#314717,#314718, + #314719,#314720,#314721,#314722,#314723)); +#314713 = ORIENTED_EDGE('',*,*,#314324,.T.); +#314714 = ORIENTED_EDGE('',*,*,#314357,.T.); +#314715 = ORIENTED_EDGE('',*,*,#314388,.T.); +#314716 = ORIENTED_EDGE('',*,*,#314419,.T.); +#314717 = ORIENTED_EDGE('',*,*,#314450,.T.); +#314718 = ORIENTED_EDGE('',*,*,#314483,.T.); +#314719 = ORIENTED_EDGE('',*,*,#314514,.T.); +#314720 = ORIENTED_EDGE('',*,*,#314545,.T.); +#314721 = ORIENTED_EDGE('',*,*,#314576,.T.); +#314722 = ORIENTED_EDGE('',*,*,#314607,.T.); +#314723 = ORIENTED_EDGE('',*,*,#314638,.T.); +#314724 = FACE_BOUND('',#314725,.F.); +#314725 = EDGE_LOOP('',(#314726)); +#314726 = ORIENTED_EDGE('',*,*,#314669,.T.); +#314727 = PLANE('',#314728); +#314728 = AXIS2_PLACEMENT_3D('',#314729,#314730,#314731); +#314729 = CARTESIAN_POINT('',(0.,0.,1.545)); +#314730 = DIRECTION('',(0.,0.,1.)); +#314731 = DIRECTION('',(1.,0.,-0.)); +#314732 = MANIFOLD_SOLID_BREP('',#314733); +#314733 = CLOSED_SHELL('',(#314734,#314776,#314807,#314838,#314869, + #314900,#314933,#314964,#314995,#315026,#315057,#315079,#315112, + #315134)); +#314734 = ADVANCED_FACE('',(#314735),#314771,.T.); +#314735 = FACE_BOUND('',#314736,.T.); +#314736 = EDGE_LOOP('',(#314737,#314747,#314756,#314764)); +#314737 = ORIENTED_EDGE('',*,*,#314738,.T.); +#314738 = EDGE_CURVE('',#314739,#314741,#314743,.T.); +#314739 = VERTEX_POINT('',#314740); +#314740 = CARTESIAN_POINT('',(139.894443,-152.971853,1.51)); +#314741 = VERTEX_POINT('',#314742); +#314742 = CARTESIAN_POINT('',(139.894443,-152.971853,1.545)); +#314743 = LINE('',#314744,#314745); +#314744 = CARTESIAN_POINT('',(139.894443,-152.971853,1.51)); +#314745 = VECTOR('',#314746,1.); +#314746 = DIRECTION('',(0.,0.,1.)); +#314747 = ORIENTED_EDGE('',*,*,#314748,.T.); +#314748 = EDGE_CURVE('',#314741,#314749,#314751,.T.); +#314749 = VERTEX_POINT('',#314750); +#314750 = CARTESIAN_POINT('',(140.048079,-153.035491,1.545)); +#314751 = CIRCLE('',#314752,0.100000590676); +#314752 = AXIS2_PLACEMENT_3D('',#314753,#314754,#314755); +#314753 = CARTESIAN_POINT('',(139.95,-153.0550006871,1.545)); +#314754 = DIRECTION('',(0.,0.,-1.)); +#314755 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314756 = ORIENTED_EDGE('',*,*,#314757,.F.); +#314757 = EDGE_CURVE('',#314758,#314749,#314760,.T.); +#314758 = VERTEX_POINT('',#314759); +#314759 = CARTESIAN_POINT('',(140.048079,-153.035491,1.51)); +#314760 = LINE('',#314761,#314762); +#314761 = CARTESIAN_POINT('',(140.048079,-153.035491,1.51)); +#314762 = VECTOR('',#314763,1.); +#314763 = DIRECTION('',(0.,0.,1.)); +#314764 = ORIENTED_EDGE('',*,*,#314765,.F.); +#314765 = EDGE_CURVE('',#314739,#314758,#314766,.T.); +#314766 = CIRCLE('',#314767,0.100000590676); +#314767 = AXIS2_PLACEMENT_3D('',#314768,#314769,#314770); +#314768 = CARTESIAN_POINT('',(139.95,-153.0550006871,1.51)); +#314769 = DIRECTION('',(0.,0.,-1.)); +#314770 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314771 = CYLINDRICAL_SURFACE('',#314772,0.100000590676); +#314772 = AXIS2_PLACEMENT_3D('',#314773,#314774,#314775); +#314773 = CARTESIAN_POINT('',(139.95,-153.0550006871,1.51)); +#314774 = DIRECTION('',(0.,0.,-1.)); +#314775 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#314776 = ADVANCED_FACE('',(#314777),#314802,.T.); +#314777 = FACE_BOUND('',#314778,.T.); +#314778 = EDGE_LOOP('',(#314779,#314780,#314788,#314796)); +#314779 = ORIENTED_EDGE('',*,*,#314757,.T.); +#314780 = ORIENTED_EDGE('',*,*,#314781,.T.); +#314781 = EDGE_CURVE('',#314749,#314782,#314784,.T.); +#314782 = VERTEX_POINT('',#314783); +#314783 = CARTESIAN_POINT('',(140.048079,-153.859098,1.545)); +#314784 = LINE('',#314785,#314786); +#314785 = CARTESIAN_POINT('',(140.048079,-153.035491,1.545)); +#314786 = VECTOR('',#314787,1.); +#314787 = DIRECTION('',(0.,-1.,0.)); +#314788 = ORIENTED_EDGE('',*,*,#314789,.F.); +#314789 = EDGE_CURVE('',#314790,#314782,#314792,.T.); +#314790 = VERTEX_POINT('',#314791); +#314791 = CARTESIAN_POINT('',(140.048079,-153.859098,1.51)); +#314792 = LINE('',#314793,#314794); +#314793 = CARTESIAN_POINT('',(140.048079,-153.859098,1.51)); +#314794 = VECTOR('',#314795,1.); +#314795 = DIRECTION('',(0.,0.,1.)); +#314796 = ORIENTED_EDGE('',*,*,#314797,.F.); +#314797 = EDGE_CURVE('',#314758,#314790,#314798,.T.); +#314798 = LINE('',#314799,#314800); +#314799 = CARTESIAN_POINT('',(140.048079,-153.035491,1.51)); +#314800 = VECTOR('',#314801,1.); +#314801 = DIRECTION('',(0.,-1.,0.)); +#314802 = PLANE('',#314803); +#314803 = AXIS2_PLACEMENT_3D('',#314804,#314805,#314806); +#314804 = CARTESIAN_POINT('',(140.048079,-153.035491,1.51)); +#314805 = DIRECTION('',(1.,0.,-0.)); +#314806 = DIRECTION('',(0.,-1.,0.)); +#314807 = ADVANCED_FACE('',(#314808),#314833,.T.); +#314808 = FACE_BOUND('',#314809,.T.); +#314809 = EDGE_LOOP('',(#314810,#314811,#314819,#314827)); +#314810 = ORIENTED_EDGE('',*,*,#314789,.T.); +#314811 = ORIENTED_EDGE('',*,*,#314812,.T.); +#314812 = EDGE_CURVE('',#314782,#314813,#314815,.T.); +#314813 = VERTEX_POINT('',#314814); +#314814 = CARTESIAN_POINT('',(140.033148,-153.895146,1.545)); +#314815 = LINE('',#314816,#314817); +#314816 = CARTESIAN_POINT('',(140.048079,-153.859098,1.545)); +#314817 = VECTOR('',#314818,1.); +#314818 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#314819 = ORIENTED_EDGE('',*,*,#314820,.F.); +#314820 = EDGE_CURVE('',#314821,#314813,#314823,.T.); +#314821 = VERTEX_POINT('',#314822); +#314822 = CARTESIAN_POINT('',(140.033148,-153.895146,1.51)); +#314823 = LINE('',#314824,#314825); +#314824 = CARTESIAN_POINT('',(140.033148,-153.895146,1.51)); +#314825 = VECTOR('',#314826,1.); +#314826 = DIRECTION('',(0.,0.,1.)); +#314827 = ORIENTED_EDGE('',*,*,#314828,.F.); +#314828 = EDGE_CURVE('',#314790,#314821,#314829,.T.); +#314829 = LINE('',#314830,#314831); +#314830 = CARTESIAN_POINT('',(140.048079,-153.859098,1.51)); +#314831 = VECTOR('',#314832,1.); +#314832 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#314833 = PLANE('',#314834); +#314834 = AXIS2_PLACEMENT_3D('',#314835,#314836,#314837); +#314835 = CARTESIAN_POINT('',(140.048079,-153.859098,1.51)); +#314836 = DIRECTION('',(0.92388470188,-0.382670952168,0.)); +#314837 = DIRECTION('',(-0.382670952168,-0.92388470188,0.)); +#314838 = ADVANCED_FACE('',(#314839),#314864,.T.); +#314839 = FACE_BOUND('',#314840,.T.); +#314840 = EDGE_LOOP('',(#314841,#314842,#314850,#314858)); +#314841 = ORIENTED_EDGE('',*,*,#314820,.T.); +#314842 = ORIENTED_EDGE('',*,*,#314843,.T.); +#314843 = EDGE_CURVE('',#314813,#314844,#314846,.T.); +#314844 = VERTEX_POINT('',#314845); +#314845 = CARTESIAN_POINT('',(139.826298,-154.104712,1.545)); +#314846 = LINE('',#314847,#314848); +#314847 = CARTESIAN_POINT('',(140.033148,-153.895146,1.545)); +#314848 = VECTOR('',#314849,1.); +#314849 = DIRECTION('',(-0.702479859941,-0.711703622569,0.)); +#314850 = ORIENTED_EDGE('',*,*,#314851,.F.); +#314851 = EDGE_CURVE('',#314852,#314844,#314854,.T.); +#314852 = VERTEX_POINT('',#314853); +#314853 = CARTESIAN_POINT('',(139.826298,-154.104712,1.51)); +#314854 = LINE('',#314855,#314856); +#314855 = CARTESIAN_POINT('',(139.826298,-154.104712,1.51)); +#314856 = VECTOR('',#314857,1.); +#314857 = DIRECTION('',(0.,0.,1.)); +#314858 = ORIENTED_EDGE('',*,*,#314859,.F.); +#314859 = EDGE_CURVE('',#314821,#314852,#314860,.T.); +#314860 = LINE('',#314861,#314862); +#314861 = CARTESIAN_POINT('',(140.033148,-153.895146,1.51)); +#314862 = VECTOR('',#314863,1.); +#314863 = DIRECTION('',(-0.702479859941,-0.711703622569,0.)); +#314864 = PLANE('',#314865); +#314865 = AXIS2_PLACEMENT_3D('',#314866,#314867,#314868); +#314866 = CARTESIAN_POINT('',(140.033148,-153.895146,1.51)); +#314867 = DIRECTION('',(0.711703622569,-0.702479859941,0.)); +#314868 = DIRECTION('',(-0.702479859941,-0.711703622569,0.)); +#314869 = ADVANCED_FACE('',(#314870),#314895,.T.); +#314870 = FACE_BOUND('',#314871,.T.); +#314871 = EDGE_LOOP('',(#314872,#314873,#314881,#314889)); +#314872 = ORIENTED_EDGE('',*,*,#314851,.T.); +#314873 = ORIENTED_EDGE('',*,*,#314874,.T.); +#314874 = EDGE_CURVE('',#314844,#314875,#314877,.T.); +#314875 = VERTEX_POINT('',#314876); +#314876 = CARTESIAN_POINT('',(139.833962,-154.117986,1.545)); +#314877 = LINE('',#314878,#314879); +#314878 = CARTESIAN_POINT('',(139.826298,-154.104712,1.545)); +#314879 = VECTOR('',#314880,1.); +#314880 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#314881 = ORIENTED_EDGE('',*,*,#314882,.F.); +#314882 = EDGE_CURVE('',#314883,#314875,#314885,.T.); +#314883 = VERTEX_POINT('',#314884); +#314884 = CARTESIAN_POINT('',(139.833962,-154.117986,1.51)); +#314885 = LINE('',#314886,#314887); +#314886 = CARTESIAN_POINT('',(139.833962,-154.117986,1.51)); +#314887 = VECTOR('',#314888,1.); +#314888 = DIRECTION('',(0.,0.,1.)); +#314889 = ORIENTED_EDGE('',*,*,#314890,.F.); +#314890 = EDGE_CURVE('',#314852,#314883,#314891,.T.); +#314891 = LINE('',#314892,#314893); +#314892 = CARTESIAN_POINT('',(139.826298,-154.104712,1.51)); +#314893 = VECTOR('',#314894,1.); +#314894 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#314895 = PLANE('',#314896); +#314896 = AXIS2_PLACEMENT_3D('',#314897,#314898,#314899); +#314897 = CARTESIAN_POINT('',(139.826298,-154.104712,1.51)); +#314898 = DIRECTION('',(0.866018269693,0.500012356406,-0.)); +#314899 = DIRECTION('',(0.500012356406,-0.866018269693,0.)); +#314900 = ADVANCED_FACE('',(#314901),#314928,.T.); +#314901 = FACE_BOUND('',#314902,.T.); +#314902 = EDGE_LOOP('',(#314903,#314904,#314913,#314921)); +#314903 = ORIENTED_EDGE('',*,*,#314882,.T.); +#314904 = ORIENTED_EDGE('',*,*,#314905,.T.); +#314905 = EDGE_CURVE('',#314875,#314906,#314908,.T.); +#314906 = VERTEX_POINT('',#314907); +#314907 = CARTESIAN_POINT('',(139.671603,-153.955627,1.545)); +#314908 = CIRCLE('',#314909,0.299999934501); +#314909 = AXIS2_PLACEMENT_3D('',#314910,#314911,#314912); +#314910 = CARTESIAN_POINT('',(139.55679814059,-154.2327908594,1.545)); +#314911 = DIRECTION('',(0.,0.,-1.)); +#314912 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#314913 = ORIENTED_EDGE('',*,*,#314914,.F.); +#314914 = EDGE_CURVE('',#314915,#314906,#314917,.T.); +#314915 = VERTEX_POINT('',#314916); +#314916 = CARTESIAN_POINT('',(139.671603,-153.955627,1.51)); +#314917 = LINE('',#314918,#314919); +#314918 = CARTESIAN_POINT('',(139.671603,-153.955627,1.51)); +#314919 = VECTOR('',#314920,1.); +#314920 = DIRECTION('',(0.,0.,1.)); +#314921 = ORIENTED_EDGE('',*,*,#314922,.F.); +#314922 = EDGE_CURVE('',#314883,#314915,#314923,.T.); +#314923 = CIRCLE('',#314924,0.299999934501); +#314924 = AXIS2_PLACEMENT_3D('',#314925,#314926,#314927); +#314925 = CARTESIAN_POINT('',(139.55679814059,-154.2327908594,1.51)); +#314926 = DIRECTION('',(0.,0.,-1.)); +#314927 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#314928 = CYLINDRICAL_SURFACE('',#314929,0.299999934501); +#314929 = AXIS2_PLACEMENT_3D('',#314930,#314931,#314932); +#314930 = CARTESIAN_POINT('',(139.55679814059,-154.2327908594,1.51)); +#314931 = DIRECTION('',(0.,0.,-1.)); +#314932 = DIRECTION('',(0.923879733049,0.382682948223,0.)); +#314933 = ADVANCED_FACE('',(#314934),#314959,.T.); +#314934 = FACE_BOUND('',#314935,.T.); +#314935 = EDGE_LOOP('',(#314936,#314937,#314945,#314953)); +#314936 = ORIENTED_EDGE('',*,*,#314914,.T.); +#314937 = ORIENTED_EDGE('',*,*,#314938,.T.); +#314938 = EDGE_CURVE('',#314906,#314939,#314941,.T.); +#314939 = VERTEX_POINT('',#314940); +#314940 = CARTESIAN_POINT('',(139.684876,-153.96329,1.545)); +#314941 = LINE('',#314942,#314943); +#314942 = CARTESIAN_POINT('',(139.671603,-153.955627,1.545)); +#314943 = VECTOR('',#314944,1.); +#314944 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#314945 = ORIENTED_EDGE('',*,*,#314946,.F.); +#314946 = EDGE_CURVE('',#314947,#314939,#314949,.T.); +#314947 = VERTEX_POINT('',#314948); +#314948 = CARTESIAN_POINT('',(139.684876,-153.96329,1.51)); +#314949 = LINE('',#314950,#314951); +#314950 = CARTESIAN_POINT('',(139.684876,-153.96329,1.51)); +#314951 = VECTOR('',#314952,1.); +#314952 = DIRECTION('',(0.,0.,1.)); +#314953 = ORIENTED_EDGE('',*,*,#314954,.F.); +#314954 = EDGE_CURVE('',#314915,#314947,#314955,.T.); +#314955 = LINE('',#314956,#314957); +#314956 = CARTESIAN_POINT('',(139.671603,-153.955627,1.51)); +#314957 = VECTOR('',#314958,1.); +#314958 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#314959 = PLANE('',#314960); +#314960 = AXIS2_PLACEMENT_3D('',#314961,#314962,#314963); +#314961 = CARTESIAN_POINT('',(139.671603,-153.955627,1.51)); +#314962 = DIRECTION('',(0.499991674903,0.866030210228,-0.)); +#314963 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#314964 = ADVANCED_FACE('',(#314965),#314990,.T.); +#314965 = FACE_BOUND('',#314966,.T.); +#314966 = EDGE_LOOP('',(#314967,#314968,#314976,#314984)); +#314967 = ORIENTED_EDGE('',*,*,#314946,.T.); +#314968 = ORIENTED_EDGE('',*,*,#314969,.T.); +#314969 = EDGE_CURVE('',#314939,#314970,#314972,.T.); +#314970 = VERTEX_POINT('',#314971); +#314971 = CARTESIAN_POINT('',(139.85,-153.798167,1.545)); +#314972 = LINE('',#314973,#314974); +#314973 = CARTESIAN_POINT('',(139.684876,-153.96329,1.545)); +#314974 = VECTOR('',#314975,1.); +#314975 = DIRECTION('',(0.707108922329,0.707104640038,0.)); +#314976 = ORIENTED_EDGE('',*,*,#314977,.F.); +#314977 = EDGE_CURVE('',#314978,#314970,#314980,.T.); +#314978 = VERTEX_POINT('',#314979); +#314979 = CARTESIAN_POINT('',(139.85,-153.798167,1.51)); +#314980 = LINE('',#314981,#314982); +#314981 = CARTESIAN_POINT('',(139.85,-153.798167,1.51)); +#314982 = VECTOR('',#314983,1.); +#314983 = DIRECTION('',(0.,0.,1.)); +#314984 = ORIENTED_EDGE('',*,*,#314985,.F.); +#314985 = EDGE_CURVE('',#314947,#314978,#314986,.T.); +#314986 = LINE('',#314987,#314988); +#314987 = CARTESIAN_POINT('',(139.684876,-153.96329,1.51)); +#314988 = VECTOR('',#314989,1.); +#314989 = DIRECTION('',(0.707108922329,0.707104640038,0.)); +#314990 = PLANE('',#314991); +#314991 = AXIS2_PLACEMENT_3D('',#314992,#314993,#314994); +#314992 = CARTESIAN_POINT('',(139.684876,-153.96329,1.51)); +#314993 = DIRECTION('',(-0.707104640038,0.707108922329,0.)); +#314994 = DIRECTION('',(0.707108922329,0.707104640038,0.)); +#314995 = ADVANCED_FACE('',(#314996),#315021,.T.); +#314996 = FACE_BOUND('',#314997,.T.); +#314997 = EDGE_LOOP('',(#314998,#314999,#315007,#315015)); +#314998 = ORIENTED_EDGE('',*,*,#314977,.T.); +#314999 = ORIENTED_EDGE('',*,*,#315000,.T.); +#315000 = EDGE_CURVE('',#314970,#315001,#315003,.T.); +#315001 = VERTEX_POINT('',#315002); +#315002 = CARTESIAN_POINT('',(139.851921,-153.035491,1.545)); +#315003 = LINE('',#315004,#315005); +#315004 = CARTESIAN_POINT('',(139.85,-153.798167,1.545)); +#315005 = VECTOR('',#315006,1.); +#315006 = DIRECTION('',(2.518754892598E-03,0.999996827932,0.)); +#315007 = ORIENTED_EDGE('',*,*,#315008,.F.); +#315008 = EDGE_CURVE('',#315009,#315001,#315011,.T.); +#315009 = VERTEX_POINT('',#315010); +#315010 = CARTESIAN_POINT('',(139.851921,-153.035491,1.51)); +#315011 = LINE('',#315012,#315013); +#315012 = CARTESIAN_POINT('',(139.851921,-153.035491,1.51)); +#315013 = VECTOR('',#315014,1.); +#315014 = DIRECTION('',(0.,0.,1.)); +#315015 = ORIENTED_EDGE('',*,*,#315016,.F.); +#315016 = EDGE_CURVE('',#314978,#315009,#315017,.T.); +#315017 = LINE('',#315018,#315019); +#315018 = CARTESIAN_POINT('',(139.85,-153.798167,1.51)); +#315019 = VECTOR('',#315020,1.); +#315020 = DIRECTION('',(2.518754892598E-03,0.999996827932,0.)); +#315021 = PLANE('',#315022); +#315022 = AXIS2_PLACEMENT_3D('',#315023,#315024,#315025); +#315023 = CARTESIAN_POINT('',(139.85,-153.798167,1.51)); +#315024 = DIRECTION('',(-0.999996827932,2.518754892598E-03,0.)); +#315025 = DIRECTION('',(2.518754892598E-03,0.999996827932,0.)); +#315026 = ADVANCED_FACE('',(#315027),#315052,.T.); +#315027 = FACE_BOUND('',#315028,.T.); +#315028 = EDGE_LOOP('',(#315029,#315030,#315038,#315046)); +#315029 = ORIENTED_EDGE('',*,*,#315008,.T.); +#315030 = ORIENTED_EDGE('',*,*,#315031,.T.); +#315031 = EDGE_CURVE('',#315001,#315032,#315034,.T.); +#315032 = VERTEX_POINT('',#315033); +#315033 = CARTESIAN_POINT('',(139.866853,-152.999443,1.545)); +#315034 = LINE('',#315035,#315036); +#315035 = CARTESIAN_POINT('',(139.851921,-153.035491,1.545)); +#315036 = VECTOR('',#315037,1.); +#315037 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#315038 = ORIENTED_EDGE('',*,*,#315039,.F.); +#315039 = EDGE_CURVE('',#315040,#315032,#315042,.T.); +#315040 = VERTEX_POINT('',#315041); +#315041 = CARTESIAN_POINT('',(139.866853,-152.999443,1.51)); +#315042 = LINE('',#315043,#315044); +#315043 = CARTESIAN_POINT('',(139.866853,-152.999443,1.51)); +#315044 = VECTOR('',#315045,1.); +#315045 = DIRECTION('',(0.,0.,1.)); +#315046 = ORIENTED_EDGE('',*,*,#315047,.F.); +#315047 = EDGE_CURVE('',#315009,#315040,#315048,.T.); +#315048 = LINE('',#315049,#315050); +#315049 = CARTESIAN_POINT('',(139.851921,-153.035491,1.51)); +#315050 = VECTOR('',#315051,1.); +#315051 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#315052 = PLANE('',#315053); +#315053 = AXIS2_PLACEMENT_3D('',#315054,#315055,#315056); +#315054 = CARTESIAN_POINT('',(139.851921,-153.035491,1.51)); +#315055 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#315056 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#315057 = ADVANCED_FACE('',(#315058),#315074,.T.); +#315058 = FACE_BOUND('',#315059,.T.); +#315059 = EDGE_LOOP('',(#315060,#315061,#315067,#315068)); +#315060 = ORIENTED_EDGE('',*,*,#315039,.T.); +#315061 = ORIENTED_EDGE('',*,*,#315062,.T.); +#315062 = EDGE_CURVE('',#315032,#314741,#315063,.T.); +#315063 = LINE('',#315064,#315065); +#315064 = CARTESIAN_POINT('',(139.866853,-152.999443,1.545)); +#315065 = VECTOR('',#315066,1.); +#315066 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#315067 = ORIENTED_EDGE('',*,*,#314738,.F.); +#315068 = ORIENTED_EDGE('',*,*,#315069,.F.); +#315069 = EDGE_CURVE('',#315040,#314739,#315070,.T.); +#315070 = LINE('',#315071,#315072); +#315071 = CARTESIAN_POINT('',(139.866853,-152.999443,1.51)); +#315072 = VECTOR('',#315073,1.); +#315073 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#315074 = PLANE('',#315075); +#315075 = AXIS2_PLACEMENT_3D('',#315076,#315077,#315078); +#315076 = CARTESIAN_POINT('',(139.866853,-152.999443,1.51)); +#315077 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#315078 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#315079 = ADVANCED_FACE('',(#315080),#315107,.F.); +#315080 = FACE_BOUND('',#315081,.T.); +#315081 = EDGE_LOOP('',(#315082,#315092,#315099,#315100)); +#315082 = ORIENTED_EDGE('',*,*,#315083,.T.); +#315083 = EDGE_CURVE('',#315084,#315086,#315088,.T.); +#315084 = VERTEX_POINT('',#315085); +#315085 = CARTESIAN_POINT('',(139.694053,-154.232791,1.51)); +#315086 = VERTEX_POINT('',#315087); +#315087 = CARTESIAN_POINT('',(139.694053,-154.232791,1.545)); +#315088 = LINE('',#315089,#315090); +#315089 = CARTESIAN_POINT('',(139.694053,-154.232791,1.51)); +#315090 = VECTOR('',#315091,1.); +#315091 = DIRECTION('',(0.,0.,1.)); +#315092 = ORIENTED_EDGE('',*,*,#315093,.T.); +#315093 = EDGE_CURVE('',#315086,#315086,#315094,.T.); +#315094 = CIRCLE('',#315095,0.137255); +#315095 = AXIS2_PLACEMENT_3D('',#315096,#315097,#315098); +#315096 = CARTESIAN_POINT('',(139.556798,-154.232791,1.545)); +#315097 = DIRECTION('',(0.,0.,1.)); +#315098 = DIRECTION('',(1.,0.,-0.)); +#315099 = ORIENTED_EDGE('',*,*,#315083,.F.); +#315100 = ORIENTED_EDGE('',*,*,#315101,.F.); +#315101 = EDGE_CURVE('',#315084,#315084,#315102,.T.); +#315102 = CIRCLE('',#315103,0.137255); +#315103 = AXIS2_PLACEMENT_3D('',#315104,#315105,#315106); +#315104 = CARTESIAN_POINT('',(139.556798,-154.232791,1.51)); +#315105 = DIRECTION('',(0.,0.,1.)); +#315106 = DIRECTION('',(1.,0.,-0.)); +#315107 = CYLINDRICAL_SURFACE('',#315108,0.137255); +#315108 = AXIS2_PLACEMENT_3D('',#315109,#315110,#315111); +#315109 = CARTESIAN_POINT('',(139.556798,-154.232791,1.51)); +#315110 = DIRECTION('',(-0.,-0.,-1.)); +#315111 = DIRECTION('',(1.,0.,-0.)); +#315112 = ADVANCED_FACE('',(#315113,#315126),#315129,.F.); +#315113 = FACE_BOUND('',#315114,.T.); +#315114 = EDGE_LOOP('',(#315115,#315116,#315117,#315118,#315119,#315120, + #315121,#315122,#315123,#315124,#315125)); +#315115 = ORIENTED_EDGE('',*,*,#314765,.T.); +#315116 = ORIENTED_EDGE('',*,*,#314797,.T.); +#315117 = ORIENTED_EDGE('',*,*,#314828,.T.); +#315118 = ORIENTED_EDGE('',*,*,#314859,.T.); +#315119 = ORIENTED_EDGE('',*,*,#314890,.T.); +#315120 = ORIENTED_EDGE('',*,*,#314922,.T.); +#315121 = ORIENTED_EDGE('',*,*,#314954,.T.); +#315122 = ORIENTED_EDGE('',*,*,#314985,.T.); +#315123 = ORIENTED_EDGE('',*,*,#315016,.T.); +#315124 = ORIENTED_EDGE('',*,*,#315047,.T.); +#315125 = ORIENTED_EDGE('',*,*,#315069,.T.); +#315126 = FACE_BOUND('',#315127,.T.); +#315127 = EDGE_LOOP('',(#315128)); +#315128 = ORIENTED_EDGE('',*,*,#315101,.T.); +#315129 = PLANE('',#315130); +#315130 = AXIS2_PLACEMENT_3D('',#315131,#315132,#315133); +#315131 = CARTESIAN_POINT('',(0.,0.,1.51)); +#315132 = DIRECTION('',(0.,0.,1.)); +#315133 = DIRECTION('',(1.,0.,-0.)); +#315134 = ADVANCED_FACE('',(#315135,#315148),#315151,.T.); +#315135 = FACE_BOUND('',#315136,.F.); +#315136 = EDGE_LOOP('',(#315137,#315138,#315139,#315140,#315141,#315142, + #315143,#315144,#315145,#315146,#315147)); +#315137 = ORIENTED_EDGE('',*,*,#314748,.T.); +#315138 = ORIENTED_EDGE('',*,*,#314781,.T.); +#315139 = ORIENTED_EDGE('',*,*,#314812,.T.); +#315140 = ORIENTED_EDGE('',*,*,#314843,.T.); +#315141 = ORIENTED_EDGE('',*,*,#314874,.T.); +#315142 = ORIENTED_EDGE('',*,*,#314905,.T.); +#315143 = ORIENTED_EDGE('',*,*,#314938,.T.); +#315144 = ORIENTED_EDGE('',*,*,#314969,.T.); +#315145 = ORIENTED_EDGE('',*,*,#315000,.T.); +#315146 = ORIENTED_EDGE('',*,*,#315031,.T.); +#315147 = ORIENTED_EDGE('',*,*,#315062,.T.); +#315148 = FACE_BOUND('',#315149,.F.); +#315149 = EDGE_LOOP('',(#315150)); +#315150 = ORIENTED_EDGE('',*,*,#315093,.T.); +#315151 = PLANE('',#315152); +#315152 = AXIS2_PLACEMENT_3D('',#315153,#315154,#315155); +#315153 = CARTESIAN_POINT('',(0.,0.,1.545)); +#315154 = DIRECTION('',(0.,0.,1.)); +#315155 = DIRECTION('',(1.,0.,-0.)); +#315156 = MANIFOLD_SOLID_BREP('',#315157); +#315157 = CLOSED_SHELL('',(#315158,#315198,#315229,#315262,#315293, + #315324,#315355,#315388,#315419,#315450,#315481,#315512,#315543, + #315574,#315605,#315636,#315667,#315698,#315729,#315760,#315791, + #315822,#315853,#315884,#315917,#315948,#315979,#316010,#316041, + #316072,#316103,#316134,#316165,#316196,#316227,#316258,#316289, + #316322,#316353,#316384,#316415,#316446,#316477,#316508,#316539, + #316570,#316601,#316632,#316663,#316696,#316727,#316758,#316789, + #316820,#316851,#316882,#316913,#316944,#316975,#317006,#317037, + #317068,#317099,#317130,#317161,#317192,#317223,#317254,#317285, + #317316,#317347,#317378,#317409,#317440,#317462,#317495,#317528, + #317616)); +#315158 = ADVANCED_FACE('',(#315159),#315193,.F.); +#315159 = FACE_BOUND('',#315160,.F.); +#315160 = EDGE_LOOP('',(#315161,#315171,#315179,#315187)); +#315161 = ORIENTED_EDGE('',*,*,#315162,.T.); +#315162 = EDGE_CURVE('',#315163,#315165,#315167,.T.); +#315163 = VERTEX_POINT('',#315164); +#315164 = CARTESIAN_POINT('',(127.944443,-117.916853,0.)); +#315165 = VERTEX_POINT('',#315166); +#315166 = CARTESIAN_POINT('',(127.944443,-117.916853,-3.5E-02)); +#315167 = LINE('',#315168,#315169); +#315168 = CARTESIAN_POINT('',(127.944443,-117.916853,0.)); +#315169 = VECTOR('',#315170,1.); +#315170 = DIRECTION('',(0.,0.,-1.)); +#315171 = ORIENTED_EDGE('',*,*,#315172,.T.); +#315172 = EDGE_CURVE('',#315165,#315173,#315175,.T.); +#315173 = VERTEX_POINT('',#315174); +#315174 = CARTESIAN_POINT('',(128.010736,-117.892882,-3.5E-02)); +#315175 = LINE('',#315176,#315177); +#315176 = CARTESIAN_POINT('',(127.944443,-117.916853,-3.5E-02)); +#315177 = VECTOR('',#315178,1.); +#315178 = DIRECTION('',(0.940409430913,0.340044265132,0.)); +#315179 = ORIENTED_EDGE('',*,*,#315180,.F.); +#315180 = EDGE_CURVE('',#315181,#315173,#315183,.T.); +#315181 = VERTEX_POINT('',#315182); +#315182 = CARTESIAN_POINT('',(128.010736,-117.892882,0.)); +#315183 = LINE('',#315184,#315185); +#315184 = CARTESIAN_POINT('',(128.010736,-117.892882,0.)); +#315185 = VECTOR('',#315186,1.); +#315186 = DIRECTION('',(0.,0.,-1.)); +#315187 = ORIENTED_EDGE('',*,*,#315188,.F.); +#315188 = EDGE_CURVE('',#315163,#315181,#315189,.T.); +#315189 = LINE('',#315190,#315191); +#315190 = CARTESIAN_POINT('',(127.944443,-117.916853,0.)); +#315191 = VECTOR('',#315192,1.); +#315192 = DIRECTION('',(0.940409430913,0.340044265132,0.)); +#315193 = PLANE('',#315194); +#315194 = AXIS2_PLACEMENT_3D('',#315195,#315196,#315197); +#315195 = CARTESIAN_POINT('',(127.944443,-117.916853,0.)); +#315196 = DIRECTION('',(0.340044265132,-0.940409430913,0.)); +#315197 = DIRECTION('',(0.940409430913,0.340044265132,0.)); +#315198 = ADVANCED_FACE('',(#315199),#315224,.F.); +#315199 = FACE_BOUND('',#315200,.F.); +#315200 = EDGE_LOOP('',(#315201,#315202,#315210,#315218)); +#315201 = ORIENTED_EDGE('',*,*,#315180,.T.); +#315202 = ORIENTED_EDGE('',*,*,#315203,.T.); +#315203 = EDGE_CURVE('',#315173,#315204,#315206,.T.); +#315204 = VERTEX_POINT('',#315205); +#315205 = CARTESIAN_POINT('',(130.029264,-117.892882,-3.5E-02)); +#315206 = LINE('',#315207,#315208); +#315207 = CARTESIAN_POINT('',(128.010736,-117.892882,-3.5E-02)); +#315208 = VECTOR('',#315209,1.); +#315209 = DIRECTION('',(1.,0.,0.)); +#315210 = ORIENTED_EDGE('',*,*,#315211,.F.); +#315211 = EDGE_CURVE('',#315212,#315204,#315214,.T.); +#315212 = VERTEX_POINT('',#315213); +#315213 = CARTESIAN_POINT('',(130.029264,-117.892882,0.)); +#315214 = LINE('',#315215,#315216); +#315215 = CARTESIAN_POINT('',(130.029264,-117.892882,0.)); +#315216 = VECTOR('',#315217,1.); +#315217 = DIRECTION('',(0.,0.,-1.)); +#315218 = ORIENTED_EDGE('',*,*,#315219,.F.); +#315219 = EDGE_CURVE('',#315181,#315212,#315220,.T.); +#315220 = LINE('',#315221,#315222); +#315221 = CARTESIAN_POINT('',(128.010736,-117.892882,0.)); +#315222 = VECTOR('',#315223,1.); +#315223 = DIRECTION('',(1.,0.,0.)); +#315224 = PLANE('',#315225); +#315225 = AXIS2_PLACEMENT_3D('',#315226,#315227,#315228); +#315226 = CARTESIAN_POINT('',(128.010736,-117.892882,0.)); +#315227 = DIRECTION('',(0.,-1.,0.)); +#315228 = DIRECTION('',(1.,0.,0.)); +#315229 = ADVANCED_FACE('',(#315230),#315257,.T.); +#315230 = FACE_BOUND('',#315231,.F.); +#315231 = EDGE_LOOP('',(#315232,#315233,#315242,#315250)); +#315232 = ORIENTED_EDGE('',*,*,#315211,.T.); +#315233 = ORIENTED_EDGE('',*,*,#315234,.T.); +#315234 = EDGE_CURVE('',#315204,#315235,#315237,.T.); +#315235 = VERTEX_POINT('',#315236); +#315236 = CARTESIAN_POINT('',(130.147118,-118.010736,-3.5E-02)); +#315237 = CIRCLE('',#315238,0.150002525551); +#315238 = AXIS2_PLACEMENT_3D('',#315239,#315240,#315241); +#315239 = CARTESIAN_POINT('',(129.99999810058,-118.0400018994,-3.5E-02) + ); +#315240 = DIRECTION('',(0.,0.,-1.)); +#315241 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#315242 = ORIENTED_EDGE('',*,*,#315243,.F.); +#315243 = EDGE_CURVE('',#315244,#315235,#315246,.T.); +#315244 = VERTEX_POINT('',#315245); +#315245 = CARTESIAN_POINT('',(130.147118,-118.010736,0.)); +#315246 = LINE('',#315247,#315248); +#315247 = CARTESIAN_POINT('',(130.147118,-118.010736,0.)); +#315248 = VECTOR('',#315249,1.); +#315249 = DIRECTION('',(0.,0.,-1.)); +#315250 = ORIENTED_EDGE('',*,*,#315251,.F.); +#315251 = EDGE_CURVE('',#315212,#315244,#315252,.T.); +#315252 = CIRCLE('',#315253,0.150002525551); +#315253 = AXIS2_PLACEMENT_3D('',#315254,#315255,#315256); +#315254 = CARTESIAN_POINT('',(129.99999810058,-118.0400018994,0.)); +#315255 = DIRECTION('',(0.,0.,-1.)); +#315256 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#315257 = CYLINDRICAL_SURFACE('',#315258,0.150002525551); +#315258 = AXIS2_PLACEMENT_3D('',#315259,#315260,#315261); +#315259 = CARTESIAN_POINT('',(129.99999810058,-118.0400018994,0.)); +#315260 = DIRECTION('',(-0.,-0.,1.)); +#315261 = DIRECTION('',(0.19510271114,0.980782815972,0.)); +#315262 = ADVANCED_FACE('',(#315263),#315288,.F.); +#315263 = FACE_BOUND('',#315264,.F.); +#315264 = EDGE_LOOP('',(#315265,#315266,#315274,#315282)); +#315265 = ORIENTED_EDGE('',*,*,#315243,.T.); +#315266 = ORIENTED_EDGE('',*,*,#315267,.T.); +#315267 = EDGE_CURVE('',#315235,#315268,#315270,.T.); +#315268 = VERTEX_POINT('',#315269); +#315269 = CARTESIAN_POINT('',(130.147118,-118.045696,-3.5E-02)); +#315270 = LINE('',#315271,#315272); +#315271 = CARTESIAN_POINT('',(130.147118,-118.010736,-3.5E-02)); +#315272 = VECTOR('',#315273,1.); +#315273 = DIRECTION('',(0.,-1.,0.)); +#315274 = ORIENTED_EDGE('',*,*,#315275,.F.); +#315275 = EDGE_CURVE('',#315276,#315268,#315278,.T.); +#315276 = VERTEX_POINT('',#315277); +#315277 = CARTESIAN_POINT('',(130.147118,-118.045696,0.)); +#315278 = LINE('',#315279,#315280); +#315279 = CARTESIAN_POINT('',(130.147118,-118.045696,0.)); +#315280 = VECTOR('',#315281,1.); +#315281 = DIRECTION('',(0.,0.,-1.)); +#315282 = ORIENTED_EDGE('',*,*,#315283,.F.); +#315283 = EDGE_CURVE('',#315244,#315276,#315284,.T.); +#315284 = LINE('',#315285,#315286); +#315285 = CARTESIAN_POINT('',(130.147118,-118.010736,0.)); +#315286 = VECTOR('',#315287,1.); +#315287 = DIRECTION('',(0.,-1.,0.)); +#315288 = PLANE('',#315289); +#315289 = AXIS2_PLACEMENT_3D('',#315290,#315291,#315292); +#315290 = CARTESIAN_POINT('',(130.147118,-118.010736,0.)); +#315291 = DIRECTION('',(-1.,-0.,-0.)); +#315292 = DIRECTION('',(0.,-1.,0.)); +#315293 = ADVANCED_FACE('',(#315294),#315319,.F.); +#315294 = FACE_BOUND('',#315295,.F.); +#315295 = EDGE_LOOP('',(#315296,#315297,#315305,#315313)); +#315296 = ORIENTED_EDGE('',*,*,#315275,.T.); +#315297 = ORIENTED_EDGE('',*,*,#315298,.T.); +#315298 = EDGE_CURVE('',#315268,#315299,#315301,.T.); +#315299 = VERTEX_POINT('',#315300); +#315300 = CARTESIAN_POINT('',(130.201422,-118.1,-3.5E-02)); +#315301 = LINE('',#315302,#315303); +#315302 = CARTESIAN_POINT('',(130.147118,-118.045696,-3.5E-02)); +#315303 = VECTOR('',#315304,1.); +#315304 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#315305 = ORIENTED_EDGE('',*,*,#315306,.F.); +#315306 = EDGE_CURVE('',#315307,#315299,#315309,.T.); +#315307 = VERTEX_POINT('',#315308); +#315308 = CARTESIAN_POINT('',(130.201422,-118.1,0.)); +#315309 = LINE('',#315310,#315311); +#315310 = CARTESIAN_POINT('',(130.201422,-118.1,0.)); +#315311 = VECTOR('',#315312,1.); +#315312 = DIRECTION('',(0.,0.,-1.)); +#315313 = ORIENTED_EDGE('',*,*,#315314,.F.); +#315314 = EDGE_CURVE('',#315276,#315307,#315315,.T.); +#315315 = LINE('',#315316,#315317); +#315316 = CARTESIAN_POINT('',(130.147118,-118.045696,0.)); +#315317 = VECTOR('',#315318,1.); +#315318 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#315319 = PLANE('',#315320); +#315320 = AXIS2_PLACEMENT_3D('',#315321,#315322,#315323); +#315321 = CARTESIAN_POINT('',(130.147118,-118.045696,0.)); +#315322 = DIRECTION('',(-0.707106781186,-0.707106781187,-0.)); +#315323 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#315324 = ADVANCED_FACE('',(#315325),#315350,.F.); +#315325 = FACE_BOUND('',#315326,.F.); +#315326 = EDGE_LOOP('',(#315327,#315328,#315336,#315344)); +#315327 = ORIENTED_EDGE('',*,*,#315306,.T.); +#315328 = ORIENTED_EDGE('',*,*,#315329,.T.); +#315329 = EDGE_CURVE('',#315299,#315330,#315332,.T.); +#315330 = VERTEX_POINT('',#315331); +#315331 = CARTESIAN_POINT('',(131.969509,-118.101921,-3.5E-02)); +#315332 = LINE('',#315333,#315334); +#315333 = CARTESIAN_POINT('',(130.201422,-118.1,-3.5E-02)); +#315334 = VECTOR('',#315335,1.); +#315335 = DIRECTION('',(0.999999409776,-1.086484356363E-03,0.)); +#315336 = ORIENTED_EDGE('',*,*,#315337,.F.); +#315337 = EDGE_CURVE('',#315338,#315330,#315340,.T.); +#315338 = VERTEX_POINT('',#315339); +#315339 = CARTESIAN_POINT('',(131.969509,-118.101921,0.)); +#315340 = LINE('',#315341,#315342); +#315341 = CARTESIAN_POINT('',(131.969509,-118.101921,0.)); +#315342 = VECTOR('',#315343,1.); +#315343 = DIRECTION('',(0.,0.,-1.)); +#315344 = ORIENTED_EDGE('',*,*,#315345,.F.); +#315345 = EDGE_CURVE('',#315307,#315338,#315346,.T.); +#315346 = LINE('',#315347,#315348); +#315347 = CARTESIAN_POINT('',(130.201422,-118.1,0.)); +#315348 = VECTOR('',#315349,1.); +#315349 = DIRECTION('',(0.999999409776,-1.086484356363E-03,0.)); +#315350 = PLANE('',#315351); +#315351 = AXIS2_PLACEMENT_3D('',#315352,#315353,#315354); +#315352 = CARTESIAN_POINT('',(130.201422,-118.1,0.)); +#315353 = DIRECTION('',(-1.086484356363E-03,-0.999999409776,-0.)); +#315354 = DIRECTION('',(0.999999409776,-1.086484356363E-03,0.)); +#315355 = ADVANCED_FACE('',(#315356),#315383,.T.); +#315356 = FACE_BOUND('',#315357,.F.); +#315357 = EDGE_LOOP('',(#315358,#315359,#315368,#315376)); +#315358 = ORIENTED_EDGE('',*,*,#315337,.T.); +#315359 = ORIENTED_EDGE('',*,*,#315360,.T.); +#315360 = EDGE_CURVE('',#315330,#315361,#315363,.T.); +#315361 = VERTEX_POINT('',#315362); +#315362 = CARTESIAN_POINT('',(131.969509,-118.298079,-3.5E-02)); +#315363 = CIRCLE('',#315364,0.100000456609); +#315364 = AXIS2_PLACEMENT_3D('',#315365,#315366,#315367); +#315365 = CARTESIAN_POINT('',(131.95,-118.2,-3.5E-02)); +#315366 = DIRECTION('',(0.,0.,-1.)); +#315367 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#315368 = ORIENTED_EDGE('',*,*,#315369,.F.); +#315369 = EDGE_CURVE('',#315370,#315361,#315372,.T.); +#315370 = VERTEX_POINT('',#315371); +#315371 = CARTESIAN_POINT('',(131.969509,-118.298079,0.)); +#315372 = LINE('',#315373,#315374); +#315373 = CARTESIAN_POINT('',(131.969509,-118.298079,0.)); +#315374 = VECTOR('',#315375,1.); +#315375 = DIRECTION('',(0.,0.,-1.)); +#315376 = ORIENTED_EDGE('',*,*,#315377,.F.); +#315377 = EDGE_CURVE('',#315338,#315370,#315378,.T.); +#315378 = CIRCLE('',#315379,0.100000456609); +#315379 = AXIS2_PLACEMENT_3D('',#315380,#315381,#315382); +#315380 = CARTESIAN_POINT('',(131.95,-118.2,0.)); +#315381 = DIRECTION('',(0.,0.,-1.)); +#315382 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#315383 = CYLINDRICAL_SURFACE('',#315384,0.100000456609); +#315384 = AXIS2_PLACEMENT_3D('',#315385,#315386,#315387); +#315385 = CARTESIAN_POINT('',(131.95,-118.2,0.)); +#315386 = DIRECTION('',(-0.,-0.,1.)); +#315387 = DIRECTION('',(0.195089109205,0.980785521646,0.)); +#315388 = ADVANCED_FACE('',(#315389),#315414,.F.); +#315389 = FACE_BOUND('',#315390,.F.); +#315390 = EDGE_LOOP('',(#315391,#315392,#315400,#315408)); +#315391 = ORIENTED_EDGE('',*,*,#315369,.T.); +#315392 = ORIENTED_EDGE('',*,*,#315393,.T.); +#315393 = EDGE_CURVE('',#315361,#315394,#315396,.T.); +#315394 = VERTEX_POINT('',#315395); +#315395 = CARTESIAN_POINT('',(130.140491,-118.298079,-3.5E-02)); +#315396 = LINE('',#315397,#315398); +#315397 = CARTESIAN_POINT('',(131.969509,-118.298079,-3.5E-02)); +#315398 = VECTOR('',#315399,1.); +#315399 = DIRECTION('',(-1.,0.,0.)); +#315400 = ORIENTED_EDGE('',*,*,#315401,.F.); +#315401 = EDGE_CURVE('',#315402,#315394,#315404,.T.); +#315402 = VERTEX_POINT('',#315403); +#315403 = CARTESIAN_POINT('',(130.140491,-118.298079,0.)); +#315404 = LINE('',#315405,#315406); +#315405 = CARTESIAN_POINT('',(130.140491,-118.298079,0.)); +#315406 = VECTOR('',#315407,1.); +#315407 = DIRECTION('',(0.,0.,-1.)); +#315408 = ORIENTED_EDGE('',*,*,#315409,.F.); +#315409 = EDGE_CURVE('',#315370,#315402,#315410,.T.); +#315410 = LINE('',#315411,#315412); +#315411 = CARTESIAN_POINT('',(131.969509,-118.298079,0.)); +#315412 = VECTOR('',#315413,1.); +#315413 = DIRECTION('',(-1.,0.,0.)); +#315414 = PLANE('',#315415); +#315415 = AXIS2_PLACEMENT_3D('',#315416,#315417,#315418); +#315416 = CARTESIAN_POINT('',(131.969509,-118.298079,0.)); +#315417 = DIRECTION('',(0.,1.,0.)); +#315418 = DIRECTION('',(-1.,0.,0.)); +#315419 = ADVANCED_FACE('',(#315420),#315445,.F.); +#315420 = FACE_BOUND('',#315421,.F.); +#315421 = EDGE_LOOP('',(#315422,#315423,#315431,#315439)); +#315422 = ORIENTED_EDGE('',*,*,#315401,.T.); +#315423 = ORIENTED_EDGE('',*,*,#315424,.T.); +#315424 = EDGE_CURVE('',#315394,#315425,#315427,.T.); +#315425 = VERTEX_POINT('',#315426); +#315426 = CARTESIAN_POINT('',(130.104443,-118.283147,-3.5E-02)); +#315427 = LINE('',#315428,#315429); +#315428 = CARTESIAN_POINT('',(130.140491,-118.298079,-3.5E-02)); +#315429 = VECTOR('',#315430,1.); +#315430 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#315431 = ORIENTED_EDGE('',*,*,#315432,.F.); +#315432 = EDGE_CURVE('',#315433,#315425,#315435,.T.); +#315433 = VERTEX_POINT('',#315434); +#315434 = CARTESIAN_POINT('',(130.104443,-118.283147,0.)); +#315435 = LINE('',#315436,#315437); +#315436 = CARTESIAN_POINT('',(130.104443,-118.283147,0.)); +#315437 = VECTOR('',#315438,1.); +#315438 = DIRECTION('',(0.,0.,-1.)); +#315439 = ORIENTED_EDGE('',*,*,#315440,.F.); +#315440 = EDGE_CURVE('',#315402,#315433,#315441,.T.); +#315441 = LINE('',#315442,#315443); +#315442 = CARTESIAN_POINT('',(130.140491,-118.298079,0.)); +#315443 = VECTOR('',#315444,1.); +#315444 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#315445 = PLANE('',#315446); +#315446 = AXIS2_PLACEMENT_3D('',#315447,#315448,#315449); +#315447 = CARTESIAN_POINT('',(130.140491,-118.298079,0.)); +#315448 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#315449 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#315450 = ADVANCED_FACE('',(#315451),#315476,.F.); +#315451 = FACE_BOUND('',#315452,.F.); +#315452 = EDGE_LOOP('',(#315453,#315454,#315462,#315470)); +#315453 = ORIENTED_EDGE('',*,*,#315432,.T.); +#315454 = ORIENTED_EDGE('',*,*,#315455,.T.); +#315455 = EDGE_CURVE('',#315425,#315456,#315458,.T.); +#315456 = VERTEX_POINT('',#315457); +#315457 = CARTESIAN_POINT('',(130.007808,-118.18923,-3.5E-02)); +#315458 = LINE('',#315459,#315460); +#315459 = CARTESIAN_POINT('',(130.104443,-118.283147,-3.5E-02)); +#315460 = VECTOR('',#315461,1.); +#315461 = DIRECTION('',(-0.717119879462,0.696949839286,0.)); +#315462 = ORIENTED_EDGE('',*,*,#315463,.F.); +#315463 = EDGE_CURVE('',#315464,#315456,#315466,.T.); +#315464 = VERTEX_POINT('',#315465); +#315465 = CARTESIAN_POINT('',(130.007808,-118.18923,0.)); +#315466 = LINE('',#315467,#315468); +#315467 = CARTESIAN_POINT('',(130.007808,-118.18923,0.)); +#315468 = VECTOR('',#315469,1.); +#315469 = DIRECTION('',(0.,0.,-1.)); +#315470 = ORIENTED_EDGE('',*,*,#315471,.F.); +#315471 = EDGE_CURVE('',#315433,#315464,#315472,.T.); +#315472 = LINE('',#315473,#315474); +#315473 = CARTESIAN_POINT('',(130.104443,-118.283147,0.)); +#315474 = VECTOR('',#315475,1.); +#315475 = DIRECTION('',(-0.717119879462,0.696949839286,0.)); +#315476 = PLANE('',#315477); +#315477 = AXIS2_PLACEMENT_3D('',#315478,#315479,#315480); +#315478 = CARTESIAN_POINT('',(130.104443,-118.283147,0.)); +#315479 = DIRECTION('',(0.696949839286,0.717119879462,0.)); +#315480 = DIRECTION('',(-0.717119879462,0.696949839286,0.)); +#315481 = ADVANCED_FACE('',(#315482),#315507,.F.); +#315482 = FACE_BOUND('',#315483,.F.); +#315483 = EDGE_LOOP('',(#315484,#315485,#315493,#315501)); +#315484 = ORIENTED_EDGE('',*,*,#315463,.T.); +#315485 = ORIENTED_EDGE('',*,*,#315486,.T.); +#315486 = EDGE_CURVE('',#315456,#315487,#315489,.T.); +#315487 = VERTEX_POINT('',#315488); +#315488 = CARTESIAN_POINT('',(128.010736,-118.187118,-3.5E-02)); +#315489 = LINE('',#315490,#315491); +#315490 = CARTESIAN_POINT('',(130.007808,-118.18923,-3.5E-02)); +#315491 = VECTOR('',#315492,1.); +#315492 = DIRECTION('',(-0.999999440796,1.057547659252E-03,0.)); +#315493 = ORIENTED_EDGE('',*,*,#315494,.F.); +#315494 = EDGE_CURVE('',#315495,#315487,#315497,.T.); +#315495 = VERTEX_POINT('',#315496); +#315496 = CARTESIAN_POINT('',(128.010736,-118.187118,0.)); +#315497 = LINE('',#315498,#315499); +#315498 = CARTESIAN_POINT('',(128.010736,-118.187118,0.)); +#315499 = VECTOR('',#315500,1.); +#315500 = DIRECTION('',(0.,0.,-1.)); +#315501 = ORIENTED_EDGE('',*,*,#315502,.F.); +#315502 = EDGE_CURVE('',#315464,#315495,#315503,.T.); +#315503 = LINE('',#315504,#315505); +#315504 = CARTESIAN_POINT('',(130.007808,-118.18923,0.)); +#315505 = VECTOR('',#315506,1.); +#315506 = DIRECTION('',(-0.999999440796,1.057547659252E-03,0.)); +#315507 = PLANE('',#315508); +#315508 = AXIS2_PLACEMENT_3D('',#315509,#315510,#315511); +#315509 = CARTESIAN_POINT('',(130.007808,-118.18923,0.)); +#315510 = DIRECTION('',(1.057547659252E-03,0.999999440796,0.)); +#315511 = DIRECTION('',(-0.999999440796,1.057547659252E-03,0.)); +#315512 = ADVANCED_FACE('',(#315513),#315538,.F.); +#315513 = FACE_BOUND('',#315514,.F.); +#315514 = EDGE_LOOP('',(#315515,#315516,#315524,#315532)); +#315515 = ORIENTED_EDGE('',*,*,#315494,.T.); +#315516 = ORIENTED_EDGE('',*,*,#315517,.T.); +#315517 = EDGE_CURVE('',#315487,#315518,#315520,.T.); +#315518 = VERTEX_POINT('',#315519); +#315519 = CARTESIAN_POINT('',(127.970832,-118.170589,-3.5E-02)); +#315520 = LINE('',#315521,#315522); +#315521 = CARTESIAN_POINT('',(128.010736,-118.187118,-3.5E-02)); +#315522 = VECTOR('',#315523,1.); +#315523 = DIRECTION('',(-0.923877715229,0.382687819642,0.)); +#315524 = ORIENTED_EDGE('',*,*,#315525,.F.); +#315525 = EDGE_CURVE('',#315526,#315518,#315528,.T.); +#315526 = VERTEX_POINT('',#315527); +#315527 = CARTESIAN_POINT('',(127.970832,-118.170589,0.)); +#315528 = LINE('',#315529,#315530); +#315529 = CARTESIAN_POINT('',(127.970832,-118.170589,0.)); +#315530 = VECTOR('',#315531,1.); +#315531 = DIRECTION('',(0.,0.,-1.)); +#315532 = ORIENTED_EDGE('',*,*,#315533,.F.); +#315533 = EDGE_CURVE('',#315495,#315526,#315534,.T.); +#315534 = LINE('',#315535,#315536); +#315535 = CARTESIAN_POINT('',(128.010736,-118.187118,0.)); +#315536 = VECTOR('',#315537,1.); +#315537 = DIRECTION('',(-0.923877715229,0.382687819642,0.)); +#315538 = PLANE('',#315539); +#315539 = AXIS2_PLACEMENT_3D('',#315540,#315541,#315542); +#315540 = CARTESIAN_POINT('',(128.010736,-118.187118,0.)); +#315541 = DIRECTION('',(0.382687819642,0.923877715229,0.)); +#315542 = DIRECTION('',(-0.923877715229,0.382687819642,0.)); +#315543 = ADVANCED_FACE('',(#315544),#315569,.F.); +#315544 = FACE_BOUND('',#315545,.F.); +#315545 = EDGE_LOOP('',(#315546,#315547,#315555,#315563)); +#315546 = ORIENTED_EDGE('',*,*,#315525,.T.); +#315547 = ORIENTED_EDGE('',*,*,#315548,.T.); +#315548 = EDGE_CURVE('',#315518,#315549,#315551,.T.); +#315549 = VERTEX_POINT('',#315550); +#315550 = CARTESIAN_POINT('',(127.030557,-119.108147,-3.5E-02)); +#315551 = LINE('',#315552,#315553); +#315552 = CARTESIAN_POINT('',(127.970832,-118.170589,-3.5E-02)); +#315553 = VECTOR('',#315554,1.); +#315554 = DIRECTION('',(-0.708129138998,-0.706082943076,0.)); +#315555 = ORIENTED_EDGE('',*,*,#315556,.F.); +#315556 = EDGE_CURVE('',#315557,#315549,#315559,.T.); +#315557 = VERTEX_POINT('',#315558); +#315558 = CARTESIAN_POINT('',(127.030557,-119.108147,0.)); +#315559 = LINE('',#315560,#315561); +#315560 = CARTESIAN_POINT('',(127.030557,-119.108147,0.)); +#315561 = VECTOR('',#315562,1.); +#315562 = DIRECTION('',(0.,0.,-1.)); +#315563 = ORIENTED_EDGE('',*,*,#315564,.F.); +#315564 = EDGE_CURVE('',#315526,#315557,#315565,.T.); +#315565 = LINE('',#315566,#315567); +#315566 = CARTESIAN_POINT('',(127.970832,-118.170589,0.)); +#315567 = VECTOR('',#315568,1.); +#315568 = DIRECTION('',(-0.708129138998,-0.706082943076,0.)); +#315569 = PLANE('',#315570); +#315570 = AXIS2_PLACEMENT_3D('',#315571,#315572,#315573); +#315571 = CARTESIAN_POINT('',(127.970832,-118.170589,0.)); +#315572 = DIRECTION('',(-0.706082943076,0.708129138998,0.)); +#315573 = DIRECTION('',(-0.708129138998,-0.706082943076,0.)); +#315574 = ADVANCED_FACE('',(#315575),#315600,.F.); +#315575 = FACE_BOUND('',#315576,.F.); +#315576 = EDGE_LOOP('',(#315577,#315578,#315586,#315594)); +#315577 = ORIENTED_EDGE('',*,*,#315556,.T.); +#315578 = ORIENTED_EDGE('',*,*,#315579,.T.); +#315579 = EDGE_CURVE('',#315549,#315580,#315582,.T.); +#315580 = VERTEX_POINT('',#315581); +#315581 = CARTESIAN_POINT('',(126.994509,-119.123079,-3.5E-02)); +#315582 = LINE('',#315583,#315584); +#315583 = CARTESIAN_POINT('',(127.030557,-119.108147,-3.5E-02)); +#315584 = VECTOR('',#315585,1.); +#315585 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#315586 = ORIENTED_EDGE('',*,*,#315587,.F.); +#315587 = EDGE_CURVE('',#315588,#315580,#315590,.T.); +#315588 = VERTEX_POINT('',#315589); +#315589 = CARTESIAN_POINT('',(126.994509,-119.123079,0.)); +#315590 = LINE('',#315591,#315592); +#315591 = CARTESIAN_POINT('',(126.994509,-119.123079,0.)); +#315592 = VECTOR('',#315593,1.); +#315593 = DIRECTION('',(0.,0.,-1.)); +#315594 = ORIENTED_EDGE('',*,*,#315595,.F.); +#315595 = EDGE_CURVE('',#315557,#315588,#315596,.T.); +#315596 = LINE('',#315597,#315598); +#315597 = CARTESIAN_POINT('',(127.030557,-119.108147,0.)); +#315598 = VECTOR('',#315599,1.); +#315599 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#315600 = PLANE('',#315601); +#315601 = AXIS2_PLACEMENT_3D('',#315602,#315603,#315604); +#315602 = CARTESIAN_POINT('',(127.030557,-119.108147,0.)); +#315603 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#315604 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#315605 = ADVANCED_FACE('',(#315606),#315631,.F.); +#315606 = FACE_BOUND('',#315607,.F.); +#315607 = EDGE_LOOP('',(#315608,#315609,#315617,#315625)); +#315608 = ORIENTED_EDGE('',*,*,#315587,.T.); +#315609 = ORIENTED_EDGE('',*,*,#315610,.T.); +#315610 = EDGE_CURVE('',#315580,#315611,#315613,.T.); +#315611 = VERTEX_POINT('',#315612); +#315612 = CARTESIAN_POINT('',(126.097498,-119.125,-3.5E-02)); +#315613 = LINE('',#315614,#315615); +#315614 = CARTESIAN_POINT('',(126.994509,-119.123079,-3.5E-02)); +#315615 = VECTOR('',#315616,1.); +#315616 = DIRECTION('',(-0.999997706875,-2.141551881641E-03,0.)); +#315617 = ORIENTED_EDGE('',*,*,#315618,.F.); +#315618 = EDGE_CURVE('',#315619,#315611,#315621,.T.); +#315619 = VERTEX_POINT('',#315620); +#315620 = CARTESIAN_POINT('',(126.097498,-119.125,0.)); +#315621 = LINE('',#315622,#315623); +#315622 = CARTESIAN_POINT('',(126.097498,-119.125,0.)); +#315623 = VECTOR('',#315624,1.); +#315624 = DIRECTION('',(0.,0.,-1.)); +#315625 = ORIENTED_EDGE('',*,*,#315626,.F.); +#315626 = EDGE_CURVE('',#315588,#315619,#315627,.T.); +#315627 = LINE('',#315628,#315629); +#315628 = CARTESIAN_POINT('',(126.994509,-119.123079,0.)); +#315629 = VECTOR('',#315630,1.); +#315630 = DIRECTION('',(-0.999997706875,-2.141551881641E-03,0.)); +#315631 = PLANE('',#315632); +#315632 = AXIS2_PLACEMENT_3D('',#315633,#315634,#315635); +#315633 = CARTESIAN_POINT('',(126.994509,-119.123079,0.)); +#315634 = DIRECTION('',(-2.141551881641E-03,0.999997706875,0.)); +#315635 = DIRECTION('',(-0.999997706875,-2.141551881641E-03,0.)); +#315636 = ADVANCED_FACE('',(#315637),#315662,.F.); +#315637 = FACE_BOUND('',#315638,.F.); +#315638 = EDGE_LOOP('',(#315639,#315640,#315648,#315656)); +#315639 = ORIENTED_EDGE('',*,*,#315618,.T.); +#315640 = ORIENTED_EDGE('',*,*,#315641,.T.); +#315641 = EDGE_CURVE('',#315611,#315642,#315644,.T.); +#315642 = VERTEX_POINT('',#315643); +#315643 = CARTESIAN_POINT('',(122.6845,-122.537998,-3.5E-02)); +#315644 = LINE('',#315645,#315646); +#315645 = CARTESIAN_POINT('',(126.097498,-119.125,-3.5E-02)); +#315646 = VECTOR('',#315647,1.); +#315647 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#315648 = ORIENTED_EDGE('',*,*,#315649,.F.); +#315649 = EDGE_CURVE('',#315650,#315642,#315652,.T.); +#315650 = VERTEX_POINT('',#315651); +#315651 = CARTESIAN_POINT('',(122.6845,-122.537998,0.)); +#315652 = LINE('',#315653,#315654); +#315653 = CARTESIAN_POINT('',(122.6845,-122.537998,0.)); +#315654 = VECTOR('',#315655,1.); +#315655 = DIRECTION('',(0.,0.,-1.)); +#315656 = ORIENTED_EDGE('',*,*,#315657,.F.); +#315657 = EDGE_CURVE('',#315619,#315650,#315658,.T.); +#315658 = LINE('',#315659,#315660); +#315659 = CARTESIAN_POINT('',(126.097498,-119.125,0.)); +#315660 = VECTOR('',#315661,1.); +#315661 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#315662 = PLANE('',#315663); +#315663 = AXIS2_PLACEMENT_3D('',#315664,#315665,#315666); +#315664 = CARTESIAN_POINT('',(126.097498,-119.125,0.)); +#315665 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#315666 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#315667 = ADVANCED_FACE('',(#315668),#315693,.F.); +#315668 = FACE_BOUND('',#315669,.F.); +#315669 = EDGE_LOOP('',(#315670,#315671,#315679,#315687)); +#315670 = ORIENTED_EDGE('',*,*,#315649,.T.); +#315671 = ORIENTED_EDGE('',*,*,#315672,.T.); +#315672 = EDGE_CURVE('',#315642,#315673,#315675,.T.); +#315673 = VERTEX_POINT('',#315674); +#315674 = CARTESIAN_POINT('',(122.6845,-151.108763,-3.5E-02)); +#315675 = LINE('',#315676,#315677); +#315676 = CARTESIAN_POINT('',(122.6845,-122.537998,-3.5E-02)); +#315677 = VECTOR('',#315678,1.); +#315678 = DIRECTION('',(0.,-1.,0.)); +#315679 = ORIENTED_EDGE('',*,*,#315680,.F.); +#315680 = EDGE_CURVE('',#315681,#315673,#315683,.T.); +#315681 = VERTEX_POINT('',#315682); +#315682 = CARTESIAN_POINT('',(122.6845,-151.108763,0.)); +#315683 = LINE('',#315684,#315685); +#315684 = CARTESIAN_POINT('',(122.6845,-151.108763,0.)); +#315685 = VECTOR('',#315686,1.); +#315686 = DIRECTION('',(0.,0.,-1.)); +#315687 = ORIENTED_EDGE('',*,*,#315688,.F.); +#315688 = EDGE_CURVE('',#315650,#315681,#315689,.T.); +#315689 = LINE('',#315690,#315691); +#315690 = CARTESIAN_POINT('',(122.6845,-122.537998,0.)); +#315691 = VECTOR('',#315692,1.); +#315692 = DIRECTION('',(0.,-1.,0.)); +#315693 = PLANE('',#315694); +#315694 = AXIS2_PLACEMENT_3D('',#315695,#315696,#315697); +#315695 = CARTESIAN_POINT('',(122.6845,-122.537998,0.)); +#315696 = DIRECTION('',(-1.,-0.,-0.)); +#315697 = DIRECTION('',(0.,-1.,0.)); +#315698 = ADVANCED_FACE('',(#315699),#315724,.F.); +#315699 = FACE_BOUND('',#315700,.F.); +#315700 = EDGE_LOOP('',(#315701,#315702,#315710,#315718)); +#315701 = ORIENTED_EDGE('',*,*,#315680,.T.); +#315702 = ORIENTED_EDGE('',*,*,#315703,.T.); +#315703 = EDGE_CURVE('',#315673,#315704,#315706,.T.); +#315704 = VERTEX_POINT('',#315705); +#315705 = CARTESIAN_POINT('',(124.475735,-152.9,-3.5E-02)); +#315706 = LINE('',#315707,#315708); +#315707 = CARTESIAN_POINT('',(122.6845,-151.108763,-3.5E-02)); +#315708 = VECTOR('',#315709,1.); +#315709 = DIRECTION('',(0.707106386427,-0.707107175946,0.)); +#315710 = ORIENTED_EDGE('',*,*,#315711,.F.); +#315711 = EDGE_CURVE('',#315712,#315704,#315714,.T.); +#315712 = VERTEX_POINT('',#315713); +#315713 = CARTESIAN_POINT('',(124.475735,-152.9,0.)); +#315714 = LINE('',#315715,#315716); +#315715 = CARTESIAN_POINT('',(124.475735,-152.9,0.)); +#315716 = VECTOR('',#315717,1.); +#315717 = DIRECTION('',(0.,0.,-1.)); +#315718 = ORIENTED_EDGE('',*,*,#315719,.F.); +#315719 = EDGE_CURVE('',#315681,#315712,#315720,.T.); +#315720 = LINE('',#315721,#315722); +#315721 = CARTESIAN_POINT('',(122.6845,-151.108763,0.)); +#315722 = VECTOR('',#315723,1.); +#315723 = DIRECTION('',(0.707106386427,-0.707107175946,0.)); +#315724 = PLANE('',#315725); +#315725 = AXIS2_PLACEMENT_3D('',#315726,#315727,#315728); +#315726 = CARTESIAN_POINT('',(122.6845,-151.108763,0.)); +#315727 = DIRECTION('',(-0.707107175946,-0.707106386427,-0.)); +#315728 = DIRECTION('',(0.707106386427,-0.707107175946,0.)); +#315729 = ADVANCED_FACE('',(#315730),#315755,.F.); +#315730 = FACE_BOUND('',#315731,.F.); +#315731 = EDGE_LOOP('',(#315732,#315733,#315741,#315749)); +#315732 = ORIENTED_EDGE('',*,*,#315711,.T.); +#315733 = ORIENTED_EDGE('',*,*,#315734,.T.); +#315734 = EDGE_CURVE('',#315704,#315735,#315737,.T.); +#315735 = VERTEX_POINT('',#315736); +#315736 = CARTESIAN_POINT('',(124.519509,-152.901921,-3.5E-02)); +#315737 = LINE('',#315738,#315739); +#315738 = CARTESIAN_POINT('',(124.475735,-152.9,-3.5E-02)); +#315739 = VECTOR('',#315740,1.); +#315740 = DIRECTION('',(0.99903846404,-4.384230112403E-02,0.)); +#315741 = ORIENTED_EDGE('',*,*,#315742,.F.); +#315742 = EDGE_CURVE('',#315743,#315735,#315745,.T.); +#315743 = VERTEX_POINT('',#315744); +#315744 = CARTESIAN_POINT('',(124.519509,-152.901921,0.)); +#315745 = LINE('',#315746,#315747); +#315746 = CARTESIAN_POINT('',(124.519509,-152.901921,0.)); +#315747 = VECTOR('',#315748,1.); +#315748 = DIRECTION('',(0.,0.,-1.)); +#315749 = ORIENTED_EDGE('',*,*,#315750,.F.); +#315750 = EDGE_CURVE('',#315712,#315743,#315751,.T.); +#315751 = LINE('',#315752,#315753); +#315752 = CARTESIAN_POINT('',(124.475735,-152.9,0.)); +#315753 = VECTOR('',#315754,1.); +#315754 = DIRECTION('',(0.99903846404,-4.384230112403E-02,0.)); +#315755 = PLANE('',#315756); +#315756 = AXIS2_PLACEMENT_3D('',#315757,#315758,#315759); +#315757 = CARTESIAN_POINT('',(124.475735,-152.9,0.)); +#315758 = DIRECTION('',(-4.384230112403E-02,-0.99903846404,-0.)); +#315759 = DIRECTION('',(0.99903846404,-4.384230112403E-02,0.)); +#315760 = ADVANCED_FACE('',(#315761),#315786,.F.); +#315761 = FACE_BOUND('',#315762,.F.); +#315762 = EDGE_LOOP('',(#315763,#315764,#315772,#315780)); +#315763 = ORIENTED_EDGE('',*,*,#315742,.T.); +#315764 = ORIENTED_EDGE('',*,*,#315765,.T.); +#315765 = EDGE_CURVE('',#315735,#315766,#315768,.T.); +#315766 = VERTEX_POINT('',#315767); +#315767 = CARTESIAN_POINT('',(124.555557,-152.916853,-3.5E-02)); +#315768 = LINE('',#315769,#315770); +#315769 = CARTESIAN_POINT('',(124.519509,-152.901921,-3.5E-02)); +#315770 = VECTOR('',#315771,1.); +#315771 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315772 = ORIENTED_EDGE('',*,*,#315773,.F.); +#315773 = EDGE_CURVE('',#315774,#315766,#315776,.T.); +#315774 = VERTEX_POINT('',#315775); +#315775 = CARTESIAN_POINT('',(124.555557,-152.916853,0.)); +#315776 = LINE('',#315777,#315778); +#315777 = CARTESIAN_POINT('',(124.555557,-152.916853,0.)); +#315778 = VECTOR('',#315779,1.); +#315779 = DIRECTION('',(0.,0.,-1.)); +#315780 = ORIENTED_EDGE('',*,*,#315781,.F.); +#315781 = EDGE_CURVE('',#315743,#315774,#315782,.T.); +#315782 = LINE('',#315783,#315784); +#315783 = CARTESIAN_POINT('',(124.519509,-152.901921,0.)); +#315784 = VECTOR('',#315785,1.); +#315785 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315786 = PLANE('',#315787); +#315787 = AXIS2_PLACEMENT_3D('',#315788,#315789,#315790); +#315788 = CARTESIAN_POINT('',(124.519509,-152.901921,0.)); +#315789 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#315790 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315791 = ADVANCED_FACE('',(#315792),#315817,.F.); +#315792 = FACE_BOUND('',#315793,.F.); +#315793 = EDGE_LOOP('',(#315794,#315795,#315803,#315811)); +#315794 = ORIENTED_EDGE('',*,*,#315773,.T.); +#315795 = ORIENTED_EDGE('',*,*,#315796,.T.); +#315796 = EDGE_CURVE('',#315766,#315797,#315799,.T.); +#315797 = VERTEX_POINT('',#315798); +#315798 = CARTESIAN_POINT('',(126.641421,-155.,-3.5E-02)); +#315799 = LINE('',#315800,#315801); +#315800 = CARTESIAN_POINT('',(124.555557,-152.916853,-3.5E-02)); +#315801 = VECTOR('',#315802,1.); +#315802 = DIRECTION('',(0.707567461832,-0.706645800212,0.)); +#315803 = ORIENTED_EDGE('',*,*,#315804,.F.); +#315804 = EDGE_CURVE('',#315805,#315797,#315807,.T.); +#315805 = VERTEX_POINT('',#315806); +#315806 = CARTESIAN_POINT('',(126.641421,-155.,0.)); +#315807 = LINE('',#315808,#315809); +#315808 = CARTESIAN_POINT('',(126.641421,-155.,0.)); +#315809 = VECTOR('',#315810,1.); +#315810 = DIRECTION('',(0.,0.,-1.)); +#315811 = ORIENTED_EDGE('',*,*,#315812,.F.); +#315812 = EDGE_CURVE('',#315774,#315805,#315813,.T.); +#315813 = LINE('',#315814,#315815); +#315814 = CARTESIAN_POINT('',(124.555557,-152.916853,0.)); +#315815 = VECTOR('',#315816,1.); +#315816 = DIRECTION('',(0.707567461832,-0.706645800212,0.)); +#315817 = PLANE('',#315818); +#315818 = AXIS2_PLACEMENT_3D('',#315819,#315820,#315821); +#315819 = CARTESIAN_POINT('',(124.555557,-152.916853,0.)); +#315820 = DIRECTION('',(-0.706645800212,-0.707567461832,-0.)); +#315821 = DIRECTION('',(0.707567461832,-0.706645800212,0.)); +#315822 = ADVANCED_FACE('',(#315823),#315848,.F.); +#315823 = FACE_BOUND('',#315824,.F.); +#315824 = EDGE_LOOP('',(#315825,#315826,#315834,#315842)); +#315825 = ORIENTED_EDGE('',*,*,#315804,.T.); +#315826 = ORIENTED_EDGE('',*,*,#315827,.T.); +#315827 = EDGE_CURVE('',#315797,#315828,#315830,.T.); +#315828 = VERTEX_POINT('',#315829); +#315829 = CARTESIAN_POINT('',(128.889578,-155.,-3.5E-02)); +#315830 = LINE('',#315831,#315832); +#315831 = CARTESIAN_POINT('',(126.641421,-155.,-3.5E-02)); +#315832 = VECTOR('',#315833,1.); +#315833 = DIRECTION('',(1.,0.,0.)); +#315834 = ORIENTED_EDGE('',*,*,#315835,.F.); +#315835 = EDGE_CURVE('',#315836,#315828,#315838,.T.); +#315836 = VERTEX_POINT('',#315837); +#315837 = CARTESIAN_POINT('',(128.889578,-155.,0.)); +#315838 = LINE('',#315839,#315840); +#315839 = CARTESIAN_POINT('',(128.889578,-155.,0.)); +#315840 = VECTOR('',#315841,1.); +#315841 = DIRECTION('',(0.,0.,-1.)); +#315842 = ORIENTED_EDGE('',*,*,#315843,.F.); +#315843 = EDGE_CURVE('',#315805,#315836,#315844,.T.); +#315844 = LINE('',#315845,#315846); +#315845 = CARTESIAN_POINT('',(126.641421,-155.,0.)); +#315846 = VECTOR('',#315847,1.); +#315847 = DIRECTION('',(1.,0.,0.)); +#315848 = PLANE('',#315849); +#315849 = AXIS2_PLACEMENT_3D('',#315850,#315851,#315852); +#315850 = CARTESIAN_POINT('',(126.641421,-155.,0.)); +#315851 = DIRECTION('',(0.,-1.,0.)); +#315852 = DIRECTION('',(1.,0.,0.)); +#315853 = ADVANCED_FACE('',(#315854),#315879,.F.); +#315854 = FACE_BOUND('',#315855,.F.); +#315855 = EDGE_LOOP('',(#315856,#315857,#315865,#315873)); +#315856 = ORIENTED_EDGE('',*,*,#315835,.T.); +#315857 = ORIENTED_EDGE('',*,*,#315858,.T.); +#315858 = EDGE_CURVE('',#315828,#315859,#315861,.T.); +#315859 = VERTEX_POINT('',#315860); +#315860 = CARTESIAN_POINT('',(133.009943,-150.882353,-3.5E-02)); +#315861 = LINE('',#315862,#315863); +#315862 = CARTESIAN_POINT('',(128.889578,-155.,-3.5E-02)); +#315863 = VECTOR('',#315864,1.); +#315864 = DIRECTION('',(0.707340041234,0.706873444166,0.)); +#315865 = ORIENTED_EDGE('',*,*,#315866,.F.); +#315866 = EDGE_CURVE('',#315867,#315859,#315869,.T.); +#315867 = VERTEX_POINT('',#315868); +#315868 = CARTESIAN_POINT('',(133.009943,-150.882353,0.)); +#315869 = LINE('',#315870,#315871); +#315870 = CARTESIAN_POINT('',(133.009943,-150.882353,0.)); +#315871 = VECTOR('',#315872,1.); +#315872 = DIRECTION('',(0.,0.,-1.)); +#315873 = ORIENTED_EDGE('',*,*,#315874,.F.); +#315874 = EDGE_CURVE('',#315836,#315867,#315875,.T.); +#315875 = LINE('',#315876,#315877); +#315876 = CARTESIAN_POINT('',(128.889578,-155.,0.)); +#315877 = VECTOR('',#315878,1.); +#315878 = DIRECTION('',(0.707340041234,0.706873444166,0.)); +#315879 = PLANE('',#315880); +#315880 = AXIS2_PLACEMENT_3D('',#315881,#315882,#315883); +#315881 = CARTESIAN_POINT('',(128.889578,-155.,0.)); +#315882 = DIRECTION('',(0.706873444166,-0.707340041234,0.)); +#315883 = DIRECTION('',(0.707340041234,0.706873444166,0.)); +#315884 = ADVANCED_FACE('',(#315885),#315912,.T.); +#315885 = FACE_BOUND('',#315886,.F.); +#315886 = EDGE_LOOP('',(#315887,#315888,#315897,#315905)); +#315887 = ORIENTED_EDGE('',*,*,#315866,.T.); +#315888 = ORIENTED_EDGE('',*,*,#315889,.T.); +#315889 = EDGE_CURVE('',#315859,#315890,#315892,.T.); +#315890 = VERTEX_POINT('',#315891); +#315891 = CARTESIAN_POINT('',(133.141422,-150.9,-3.5E-02)); +#315892 = CIRCLE('',#315893,0.100583911996); +#315893 = AXIS2_PLACEMENT_3D('',#315894,#315895,#315896); +#315894 = CARTESIAN_POINT('',(133.06562375368,-150.9661192045,-3.5E-02) + ); +#315895 = DIRECTION('',(0.,0.,-1.)); +#315896 = DIRECTION('',(-0.553575145164,0.832799230701,0.)); +#315897 = ORIENTED_EDGE('',*,*,#315898,.F.); +#315898 = EDGE_CURVE('',#315899,#315890,#315901,.T.); +#315899 = VERTEX_POINT('',#315900); +#315900 = CARTESIAN_POINT('',(133.141422,-150.9,0.)); +#315901 = LINE('',#315902,#315903); +#315902 = CARTESIAN_POINT('',(133.141422,-150.9,0.)); +#315903 = VECTOR('',#315904,1.); +#315904 = DIRECTION('',(0.,0.,-1.)); +#315905 = ORIENTED_EDGE('',*,*,#315906,.F.); +#315906 = EDGE_CURVE('',#315867,#315899,#315907,.T.); +#315907 = CIRCLE('',#315908,0.100583911996); +#315908 = AXIS2_PLACEMENT_3D('',#315909,#315910,#315911); +#315909 = CARTESIAN_POINT('',(133.06562375368,-150.9661192045,0.)); +#315910 = DIRECTION('',(0.,0.,-1.)); +#315911 = DIRECTION('',(-0.553575145164,0.832799230701,0.)); +#315912 = CYLINDRICAL_SURFACE('',#315913,0.100583911996); +#315913 = AXIS2_PLACEMENT_3D('',#315914,#315915,#315916); +#315914 = CARTESIAN_POINT('',(133.06562375368,-150.9661192045,0.)); +#315915 = DIRECTION('',(-0.,-0.,1.)); +#315916 = DIRECTION('',(-0.553575145164,0.832799230701,0.)); +#315917 = ADVANCED_FACE('',(#315918),#315943,.F.); +#315918 = FACE_BOUND('',#315919,.F.); +#315919 = EDGE_LOOP('',(#315920,#315921,#315929,#315937)); +#315920 = ORIENTED_EDGE('',*,*,#315898,.T.); +#315921 = ORIENTED_EDGE('',*,*,#315922,.T.); +#315922 = EDGE_CURVE('',#315890,#315923,#315925,.T.); +#315923 = VERTEX_POINT('',#315924); +#315924 = CARTESIAN_POINT('',(135.519509,-150.901921,-3.5E-02)); +#315925 = LINE('',#315926,#315927); +#315926 = CARTESIAN_POINT('',(133.141422,-150.9,-3.5E-02)); +#315927 = VECTOR('',#315928,1.); +#315928 = DIRECTION('',(0.999999673736,-8.077918819743E-04,0.)); +#315929 = ORIENTED_EDGE('',*,*,#315930,.F.); +#315930 = EDGE_CURVE('',#315931,#315923,#315933,.T.); +#315931 = VERTEX_POINT('',#315932); +#315932 = CARTESIAN_POINT('',(135.519509,-150.901921,0.)); +#315933 = LINE('',#315934,#315935); +#315934 = CARTESIAN_POINT('',(135.519509,-150.901921,0.)); +#315935 = VECTOR('',#315936,1.); +#315936 = DIRECTION('',(0.,0.,-1.)); +#315937 = ORIENTED_EDGE('',*,*,#315938,.F.); +#315938 = EDGE_CURVE('',#315899,#315931,#315939,.T.); +#315939 = LINE('',#315940,#315941); +#315940 = CARTESIAN_POINT('',(133.141422,-150.9,0.)); +#315941 = VECTOR('',#315942,1.); +#315942 = DIRECTION('',(0.999999673736,-8.077918819743E-04,0.)); +#315943 = PLANE('',#315944); +#315944 = AXIS2_PLACEMENT_3D('',#315945,#315946,#315947); +#315945 = CARTESIAN_POINT('',(133.141422,-150.9,0.)); +#315946 = DIRECTION('',(-8.077918819743E-04,-0.999999673736,-0.)); +#315947 = DIRECTION('',(0.999999673736,-8.077918819743E-04,0.)); +#315948 = ADVANCED_FACE('',(#315949),#315974,.F.); +#315949 = FACE_BOUND('',#315950,.F.); +#315950 = EDGE_LOOP('',(#315951,#315952,#315960,#315968)); +#315951 = ORIENTED_EDGE('',*,*,#315930,.T.); +#315952 = ORIENTED_EDGE('',*,*,#315953,.T.); +#315953 = EDGE_CURVE('',#315923,#315954,#315956,.T.); +#315954 = VERTEX_POINT('',#315955); +#315955 = CARTESIAN_POINT('',(135.555557,-150.916853,-3.5E-02)); +#315956 = LINE('',#315957,#315958); +#315957 = CARTESIAN_POINT('',(135.519509,-150.901921,-3.5E-02)); +#315958 = VECTOR('',#315959,1.); +#315959 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315960 = ORIENTED_EDGE('',*,*,#315961,.F.); +#315961 = EDGE_CURVE('',#315962,#315954,#315964,.T.); +#315962 = VERTEX_POINT('',#315963); +#315963 = CARTESIAN_POINT('',(135.555557,-150.916853,0.)); +#315964 = LINE('',#315965,#315966); +#315965 = CARTESIAN_POINT('',(135.555557,-150.916853,0.)); +#315966 = VECTOR('',#315967,1.); +#315967 = DIRECTION('',(0.,0.,-1.)); +#315968 = ORIENTED_EDGE('',*,*,#315969,.F.); +#315969 = EDGE_CURVE('',#315931,#315962,#315970,.T.); +#315970 = LINE('',#315971,#315972); +#315971 = CARTESIAN_POINT('',(135.519509,-150.901921,0.)); +#315972 = VECTOR('',#315973,1.); +#315973 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315974 = PLANE('',#315975); +#315975 = AXIS2_PLACEMENT_3D('',#315976,#315977,#315978); +#315976 = CARTESIAN_POINT('',(135.519509,-150.901921,0.)); +#315977 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#315978 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#315979 = ADVANCED_FACE('',(#315980),#316005,.F.); +#315980 = FACE_BOUND('',#315981,.F.); +#315981 = EDGE_LOOP('',(#315982,#315983,#315991,#315999)); +#315982 = ORIENTED_EDGE('',*,*,#315961,.T.); +#315983 = ORIENTED_EDGE('',*,*,#315984,.T.); +#315984 = EDGE_CURVE('',#315954,#315985,#315987,.T.); +#315985 = VERTEX_POINT('',#315986); +#315986 = CARTESIAN_POINT('',(138.283148,-153.644443,-3.5E-02)); +#315987 = LINE('',#315988,#315989); +#315988 = CARTESIAN_POINT('',(135.555557,-150.916853,-3.5E-02)); +#315989 = VECTOR('',#315990,1.); +#315990 = DIRECTION('',(0.707106910808,-0.707106651565,0.)); +#315991 = ORIENTED_EDGE('',*,*,#315992,.F.); +#315992 = EDGE_CURVE('',#315993,#315985,#315995,.T.); +#315993 = VERTEX_POINT('',#315994); +#315994 = CARTESIAN_POINT('',(138.283148,-153.644443,0.)); +#315995 = LINE('',#315996,#315997); +#315996 = CARTESIAN_POINT('',(138.283148,-153.644443,0.)); +#315997 = VECTOR('',#315998,1.); +#315998 = DIRECTION('',(0.,0.,-1.)); +#315999 = ORIENTED_EDGE('',*,*,#316000,.F.); +#316000 = EDGE_CURVE('',#315962,#315993,#316001,.T.); +#316001 = LINE('',#316002,#316003); +#316002 = CARTESIAN_POINT('',(135.555557,-150.916853,0.)); +#316003 = VECTOR('',#316004,1.); +#316004 = DIRECTION('',(0.707106910808,-0.707106651565,0.)); +#316005 = PLANE('',#316006); +#316006 = AXIS2_PLACEMENT_3D('',#316007,#316008,#316009); +#316007 = CARTESIAN_POINT('',(135.555557,-150.916853,0.)); +#316008 = DIRECTION('',(-0.707106651565,-0.707106910808,-0.)); +#316009 = DIRECTION('',(0.707106910808,-0.707106651565,0.)); +#316010 = ADVANCED_FACE('',(#316011),#316036,.F.); +#316011 = FACE_BOUND('',#316012,.F.); +#316012 = EDGE_LOOP('',(#316013,#316014,#316022,#316030)); +#316013 = ORIENTED_EDGE('',*,*,#315992,.T.); +#316014 = ORIENTED_EDGE('',*,*,#316015,.T.); +#316015 = EDGE_CURVE('',#315985,#316016,#316018,.T.); +#316016 = VERTEX_POINT('',#316017); +#316017 = CARTESIAN_POINT('',(138.298079,-153.680491,-3.5E-02)); +#316018 = LINE('',#316019,#316020); +#316019 = CARTESIAN_POINT('',(138.283148,-153.644443,-3.5E-02)); +#316020 = VECTOR('',#316021,1.); +#316021 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#316022 = ORIENTED_EDGE('',*,*,#316023,.F.); +#316023 = EDGE_CURVE('',#316024,#316016,#316026,.T.); +#316024 = VERTEX_POINT('',#316025); +#316025 = CARTESIAN_POINT('',(138.298079,-153.680491,0.)); +#316026 = LINE('',#316027,#316028); +#316027 = CARTESIAN_POINT('',(138.298079,-153.680491,0.)); +#316028 = VECTOR('',#316029,1.); +#316029 = DIRECTION('',(0.,0.,-1.)); +#316030 = ORIENTED_EDGE('',*,*,#316031,.F.); +#316031 = EDGE_CURVE('',#315993,#316024,#316032,.T.); +#316032 = LINE('',#316033,#316034); +#316033 = CARTESIAN_POINT('',(138.283148,-153.644443,0.)); +#316034 = VECTOR('',#316035,1.); +#316035 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#316036 = PLANE('',#316037); +#316037 = AXIS2_PLACEMENT_3D('',#316038,#316039,#316040); +#316038 = CARTESIAN_POINT('',(138.283148,-153.644443,0.)); +#316039 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#316040 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#316041 = ADVANCED_FACE('',(#316042),#316067,.F.); +#316042 = FACE_BOUND('',#316043,.F.); +#316043 = EDGE_LOOP('',(#316044,#316045,#316053,#316061)); +#316044 = ORIENTED_EDGE('',*,*,#316023,.T.); +#316045 = ORIENTED_EDGE('',*,*,#316046,.T.); +#316046 = EDGE_CURVE('',#316016,#316047,#316049,.T.); +#316047 = VERTEX_POINT('',#316048); +#316048 = CARTESIAN_POINT('',(138.298079,-154.369509,-3.5E-02)); +#316049 = LINE('',#316050,#316051); +#316050 = CARTESIAN_POINT('',(138.298079,-153.680491,-3.5E-02)); +#316051 = VECTOR('',#316052,1.); +#316052 = DIRECTION('',(0.,-1.,0.)); +#316053 = ORIENTED_EDGE('',*,*,#316054,.F.); +#316054 = EDGE_CURVE('',#316055,#316047,#316057,.T.); +#316055 = VERTEX_POINT('',#316056); +#316056 = CARTESIAN_POINT('',(138.298079,-154.369509,0.)); +#316057 = LINE('',#316058,#316059); +#316058 = CARTESIAN_POINT('',(138.298079,-154.369509,0.)); +#316059 = VECTOR('',#316060,1.); +#316060 = DIRECTION('',(0.,0.,-1.)); +#316061 = ORIENTED_EDGE('',*,*,#316062,.F.); +#316062 = EDGE_CURVE('',#316024,#316055,#316063,.T.); +#316063 = LINE('',#316064,#316065); +#316064 = CARTESIAN_POINT('',(138.298079,-153.680491,0.)); +#316065 = VECTOR('',#316066,1.); +#316066 = DIRECTION('',(0.,-1.,0.)); +#316067 = PLANE('',#316068); +#316068 = AXIS2_PLACEMENT_3D('',#316069,#316070,#316071); +#316069 = CARTESIAN_POINT('',(138.298079,-153.680491,0.)); +#316070 = DIRECTION('',(-1.,-0.,-0.)); +#316071 = DIRECTION('',(0.,-1.,0.)); +#316072 = ADVANCED_FACE('',(#316073),#316098,.F.); +#316073 = FACE_BOUND('',#316074,.F.); +#316074 = EDGE_LOOP('',(#316075,#316076,#316084,#316092)); +#316075 = ORIENTED_EDGE('',*,*,#316054,.T.); +#316076 = ORIENTED_EDGE('',*,*,#316077,.T.); +#316077 = EDGE_CURVE('',#316047,#316078,#316080,.T.); +#316078 = VERTEX_POINT('',#316079); +#316079 = CARTESIAN_POINT('',(138.283147,-154.405557,-3.5E-02)); +#316080 = LINE('',#316081,#316082); +#316081 = CARTESIAN_POINT('',(138.298079,-154.369509,-3.5E-02)); +#316082 = VECTOR('',#316083,1.); +#316083 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#316084 = ORIENTED_EDGE('',*,*,#316085,.F.); +#316085 = EDGE_CURVE('',#316086,#316078,#316088,.T.); +#316086 = VERTEX_POINT('',#316087); +#316087 = CARTESIAN_POINT('',(138.283147,-154.405557,0.)); +#316088 = LINE('',#316089,#316090); +#316089 = CARTESIAN_POINT('',(138.283147,-154.405557,0.)); +#316090 = VECTOR('',#316091,1.); +#316091 = DIRECTION('',(0.,0.,-1.)); +#316092 = ORIENTED_EDGE('',*,*,#316093,.F.); +#316093 = EDGE_CURVE('',#316055,#316086,#316094,.T.); +#316094 = LINE('',#316095,#316096); +#316095 = CARTESIAN_POINT('',(138.298079,-154.369509,0.)); +#316096 = VECTOR('',#316097,1.); +#316097 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#316098 = PLANE('',#316099); +#316099 = AXIS2_PLACEMENT_3D('',#316100,#316101,#316102); +#316100 = CARTESIAN_POINT('',(138.298079,-154.369509,0.)); +#316101 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#316102 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#316103 = ADVANCED_FACE('',(#316104),#316129,.F.); +#316104 = FACE_BOUND('',#316105,.F.); +#316105 = EDGE_LOOP('',(#316106,#316107,#316115,#316123)); +#316106 = ORIENTED_EDGE('',*,*,#316085,.T.); +#316107 = ORIENTED_EDGE('',*,*,#316108,.T.); +#316108 = EDGE_CURVE('',#316078,#316109,#316111,.T.); +#316109 = VERTEX_POINT('',#316110); +#316110 = CARTESIAN_POINT('',(137.641422,-155.05,-3.5E-02)); +#316111 = LINE('',#316112,#316113); +#316112 = CARTESIAN_POINT('',(138.283147,-154.405557,-3.5E-02)); +#316113 = VECTOR('',#316114,1.); +#316114 = DIRECTION('',(-0.7056109092,-0.708599495356,0.)); +#316115 = ORIENTED_EDGE('',*,*,#316116,.F.); +#316116 = EDGE_CURVE('',#316117,#316109,#316119,.T.); +#316117 = VERTEX_POINT('',#316118); +#316118 = CARTESIAN_POINT('',(137.641422,-155.05,0.)); +#316119 = LINE('',#316120,#316121); +#316120 = CARTESIAN_POINT('',(137.641422,-155.05,0.)); +#316121 = VECTOR('',#316122,1.); +#316122 = DIRECTION('',(0.,0.,-1.)); +#316123 = ORIENTED_EDGE('',*,*,#316124,.F.); +#316124 = EDGE_CURVE('',#316086,#316117,#316125,.T.); +#316125 = LINE('',#316126,#316127); +#316126 = CARTESIAN_POINT('',(138.283147,-154.405557,0.)); +#316127 = VECTOR('',#316128,1.); +#316128 = DIRECTION('',(-0.7056109092,-0.708599495356,0.)); +#316129 = PLANE('',#316130); +#316130 = AXIS2_PLACEMENT_3D('',#316131,#316132,#316133); +#316131 = CARTESIAN_POINT('',(138.283147,-154.405557,0.)); +#316132 = DIRECTION('',(-0.708599495356,0.7056109092,0.)); +#316133 = DIRECTION('',(-0.7056109092,-0.708599495356,0.)); +#316134 = ADVANCED_FACE('',(#316135),#316160,.F.); +#316135 = FACE_BOUND('',#316136,.F.); +#316136 = EDGE_LOOP('',(#316137,#316138,#316146,#316154)); +#316137 = ORIENTED_EDGE('',*,*,#316116,.T.); +#316138 = ORIENTED_EDGE('',*,*,#316139,.T.); +#316139 = EDGE_CURVE('',#316109,#316140,#316142,.T.); +#316140 = VERTEX_POINT('',#316141); +#316141 = CARTESIAN_POINT('',(138.108578,-155.05,-3.5E-02)); +#316142 = LINE('',#316143,#316144); +#316143 = CARTESIAN_POINT('',(137.641422,-155.05,-3.5E-02)); +#316144 = VECTOR('',#316145,1.); +#316145 = DIRECTION('',(1.,0.,0.)); +#316146 = ORIENTED_EDGE('',*,*,#316147,.F.); +#316147 = EDGE_CURVE('',#316148,#316140,#316150,.T.); +#316148 = VERTEX_POINT('',#316149); +#316149 = CARTESIAN_POINT('',(138.108578,-155.05,0.)); +#316150 = LINE('',#316151,#316152); +#316151 = CARTESIAN_POINT('',(138.108578,-155.05,0.)); +#316152 = VECTOR('',#316153,1.); +#316153 = DIRECTION('',(0.,0.,-1.)); +#316154 = ORIENTED_EDGE('',*,*,#316155,.F.); +#316155 = EDGE_CURVE('',#316117,#316148,#316156,.T.); +#316156 = LINE('',#316157,#316158); +#316157 = CARTESIAN_POINT('',(137.641422,-155.05,0.)); +#316158 = VECTOR('',#316159,1.); +#316159 = DIRECTION('',(1.,0.,0.)); +#316160 = PLANE('',#316161); +#316161 = AXIS2_PLACEMENT_3D('',#316162,#316163,#316164); +#316162 = CARTESIAN_POINT('',(137.641422,-155.05,0.)); +#316163 = DIRECTION('',(0.,-1.,0.)); +#316164 = DIRECTION('',(1.,0.,0.)); +#316165 = ADVANCED_FACE('',(#316166),#316191,.F.); +#316166 = FACE_BOUND('',#316167,.F.); +#316167 = EDGE_LOOP('',(#316168,#316169,#316177,#316185)); +#316168 = ORIENTED_EDGE('',*,*,#316147,.T.); +#316169 = ORIENTED_EDGE('',*,*,#316170,.T.); +#316170 = EDGE_CURVE('',#316140,#316171,#316173,.T.); +#316171 = VERTEX_POINT('',#316172); +#316172 = CARTESIAN_POINT('',(139.011651,-154.149644,-3.5E-02)); +#316173 = LINE('',#316174,#316175); +#316174 = CARTESIAN_POINT('',(138.108578,-155.05,-3.5E-02)); +#316175 = VECTOR('',#316176,1.); +#316176 = DIRECTION('',(0.708171286484,0.706040670924,0.)); +#316177 = ORIENTED_EDGE('',*,*,#316178,.F.); +#316178 = EDGE_CURVE('',#316179,#316171,#316181,.T.); +#316179 = VERTEX_POINT('',#316180); +#316180 = CARTESIAN_POINT('',(139.011651,-154.149644,0.)); +#316181 = LINE('',#316182,#316183); +#316182 = CARTESIAN_POINT('',(139.011651,-154.149644,0.)); +#316183 = VECTOR('',#316184,1.); +#316184 = DIRECTION('',(0.,0.,-1.)); +#316185 = ORIENTED_EDGE('',*,*,#316186,.F.); +#316186 = EDGE_CURVE('',#316148,#316179,#316187,.T.); +#316187 = LINE('',#316188,#316189); +#316188 = CARTESIAN_POINT('',(138.108578,-155.05,0.)); +#316189 = VECTOR('',#316190,1.); +#316190 = DIRECTION('',(0.708171286484,0.706040670924,0.)); +#316191 = PLANE('',#316192); +#316192 = AXIS2_PLACEMENT_3D('',#316193,#316194,#316195); +#316193 = CARTESIAN_POINT('',(138.108578,-155.05,0.)); +#316194 = DIRECTION('',(0.706040670924,-0.708171286484,0.)); +#316195 = DIRECTION('',(0.708171286484,0.706040670924,0.)); +#316196 = ADVANCED_FACE('',(#316197),#316222,.F.); +#316197 = FACE_BOUND('',#316198,.F.); +#316198 = EDGE_LOOP('',(#316199,#316200,#316208,#316216)); +#316199 = ORIENTED_EDGE('',*,*,#316178,.T.); +#316200 = ORIENTED_EDGE('',*,*,#316201,.T.); +#316201 = EDGE_CURVE('',#316171,#316202,#316204,.T.); +#316202 = VERTEX_POINT('',#316203); +#316203 = CARTESIAN_POINT('',(139.0477,-154.134712,-3.5E-02)); +#316204 = LINE('',#316205,#316206); +#316205 = CARTESIAN_POINT('',(139.011651,-154.149644,-3.5E-02)); +#316206 = VECTOR('',#316207,1.); +#316207 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#316208 = ORIENTED_EDGE('',*,*,#316209,.F.); +#316209 = EDGE_CURVE('',#316210,#316202,#316212,.T.); +#316210 = VERTEX_POINT('',#316211); +#316211 = CARTESIAN_POINT('',(139.0477,-154.134712,0.)); +#316212 = LINE('',#316213,#316214); +#316213 = CARTESIAN_POINT('',(139.0477,-154.134712,0.)); +#316214 = VECTOR('',#316215,1.); +#316215 = DIRECTION('',(0.,0.,-1.)); +#316216 = ORIENTED_EDGE('',*,*,#316217,.F.); +#316217 = EDGE_CURVE('',#316179,#316210,#316218,.T.); +#316218 = LINE('',#316219,#316220); +#316219 = CARTESIAN_POINT('',(139.011651,-154.149644,0.)); +#316220 = VECTOR('',#316221,1.); +#316221 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#316222 = PLANE('',#316223); +#316223 = AXIS2_PLACEMENT_3D('',#316224,#316225,#316226); +#316224 = CARTESIAN_POINT('',(139.011651,-154.149644,0.)); +#316225 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#316226 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#316227 = ADVANCED_FACE('',(#316228),#316253,.F.); +#316228 = FACE_BOUND('',#316229,.F.); +#316229 = EDGE_LOOP('',(#316230,#316231,#316239,#316247)); +#316230 = ORIENTED_EDGE('',*,*,#316209,.T.); +#316231 = ORIENTED_EDGE('',*,*,#316232,.T.); +#316232 = EDGE_CURVE('',#316202,#316233,#316235,.T.); +#316233 = VERTEX_POINT('',#316234); +#316234 = CARTESIAN_POINT('',(139.275667,-154.132791,-3.5E-02)); +#316235 = LINE('',#316236,#316237); +#316236 = CARTESIAN_POINT('',(139.0477,-154.134712,-3.5E-02)); +#316237 = VECTOR('',#316238,1.); +#316238 = DIRECTION('',(0.999964497606,8.426359077899E-03,0.)); +#316239 = ORIENTED_EDGE('',*,*,#316240,.F.); +#316240 = EDGE_CURVE('',#316241,#316233,#316243,.T.); +#316241 = VERTEX_POINT('',#316242); +#316242 = CARTESIAN_POINT('',(139.275667,-154.132791,0.)); +#316243 = LINE('',#316244,#316245); +#316244 = CARTESIAN_POINT('',(139.275667,-154.132791,0.)); +#316245 = VECTOR('',#316246,1.); +#316246 = DIRECTION('',(0.,0.,-1.)); +#316247 = ORIENTED_EDGE('',*,*,#316248,.F.); +#316248 = EDGE_CURVE('',#316210,#316241,#316249,.T.); +#316249 = LINE('',#316250,#316251); +#316250 = CARTESIAN_POINT('',(139.0477,-154.134712,0.)); +#316251 = VECTOR('',#316252,1.); +#316252 = DIRECTION('',(0.999964497606,8.426359077899E-03,0.)); +#316253 = PLANE('',#316254); +#316254 = AXIS2_PLACEMENT_3D('',#316255,#316256,#316257); +#316255 = CARTESIAN_POINT('',(139.0477,-154.134712,0.)); +#316256 = DIRECTION('',(8.426359077899E-03,-0.999964497606,0.)); +#316257 = DIRECTION('',(0.999964497606,8.426359077899E-03,0.)); +#316258 = ADVANCED_FACE('',(#316259),#316284,.F.); +#316259 = FACE_BOUND('',#316260,.F.); +#316260 = EDGE_LOOP('',(#316261,#316262,#316270,#316278)); +#316261 = ORIENTED_EDGE('',*,*,#316240,.T.); +#316262 = ORIENTED_EDGE('',*,*,#316263,.T.); +#316263 = EDGE_CURVE('',#316233,#316264,#316266,.T.); +#316264 = VERTEX_POINT('',#316265); +#316265 = CARTESIAN_POINT('',(139.279634,-154.117986,-3.5E-02)); +#316266 = LINE('',#316267,#316268); +#316267 = CARTESIAN_POINT('',(139.275667,-154.132791,-3.5E-02)); +#316268 = VECTOR('',#316269,1.); +#316269 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#316270 = ORIENTED_EDGE('',*,*,#316271,.F.); +#316271 = EDGE_CURVE('',#316272,#316264,#316274,.T.); +#316272 = VERTEX_POINT('',#316273); +#316273 = CARTESIAN_POINT('',(139.279634,-154.117986,0.)); +#316274 = LINE('',#316275,#316276); +#316275 = CARTESIAN_POINT('',(139.279634,-154.117986,0.)); +#316276 = VECTOR('',#316277,1.); +#316277 = DIRECTION('',(0.,0.,-1.)); +#316278 = ORIENTED_EDGE('',*,*,#316279,.F.); +#316279 = EDGE_CURVE('',#316241,#316272,#316280,.T.); +#316280 = LINE('',#316281,#316282); +#316281 = CARTESIAN_POINT('',(139.275667,-154.132791,0.)); +#316282 = VECTOR('',#316283,1.); +#316283 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#316284 = PLANE('',#316285); +#316285 = AXIS2_PLACEMENT_3D('',#316286,#316287,#316288); +#316286 = CARTESIAN_POINT('',(139.275667,-154.132791,0.)); +#316287 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#316288 = DIRECTION('',(0.258819788118,0.965925627198,0.)); +#316289 = ADVANCED_FACE('',(#316290),#316317,.T.); +#316290 = FACE_BOUND('',#316291,.F.); +#316291 = EDGE_LOOP('',(#316292,#316293,#316302,#316310)); +#316292 = ORIENTED_EDGE('',*,*,#316271,.T.); +#316293 = ORIENTED_EDGE('',*,*,#316294,.T.); +#316294 = EDGE_CURVE('',#316264,#316295,#316297,.T.); +#316295 = VERTEX_POINT('',#316296); +#316296 = CARTESIAN_POINT('',(139.279634,-154.347596,-3.5E-02)); +#316297 = CIRCLE('',#316298,0.299999850918); +#316298 = AXIS2_PLACEMENT_3D('',#316299,#316300,#316301); +#316299 = CARTESIAN_POINT('',(139.55679771069,-154.232791,-3.5E-02)); +#316300 = DIRECTION('',(0.,0.,-1.)); +#316301 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#316302 = ORIENTED_EDGE('',*,*,#316303,.F.); +#316303 = EDGE_CURVE('',#316304,#316295,#316306,.T.); +#316304 = VERTEX_POINT('',#316305); +#316305 = CARTESIAN_POINT('',(139.279634,-154.347596,0.)); +#316306 = LINE('',#316307,#316308); +#316307 = CARTESIAN_POINT('',(139.279634,-154.347596,0.)); +#316308 = VECTOR('',#316309,1.); +#316309 = DIRECTION('',(0.,0.,-1.)); +#316310 = ORIENTED_EDGE('',*,*,#316311,.F.); +#316311 = EDGE_CURVE('',#316272,#316304,#316312,.T.); +#316312 = CIRCLE('',#316313,0.299999850918); +#316313 = AXIS2_PLACEMENT_3D('',#316314,#316315,#316316); +#316314 = CARTESIAN_POINT('',(139.55679771069,-154.232791,0.)); +#316315 = DIRECTION('',(0.,0.,-1.)); +#316316 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#316317 = CYLINDRICAL_SURFACE('',#316318,0.299999850918); +#316318 = AXIS2_PLACEMENT_3D('',#316319,#316320,#316321); +#316319 = CARTESIAN_POINT('',(139.55679771069,-154.232791,0.)); +#316320 = DIRECTION('',(-0.,-0.,1.)); +#316321 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#316322 = ADVANCED_FACE('',(#316323),#316348,.F.); +#316323 = FACE_BOUND('',#316324,.F.); +#316324 = EDGE_LOOP('',(#316325,#316326,#316334,#316342)); +#316325 = ORIENTED_EDGE('',*,*,#316303,.T.); +#316326 = ORIENTED_EDGE('',*,*,#316327,.T.); +#316327 = EDGE_CURVE('',#316295,#316328,#316330,.T.); +#316328 = VERTEX_POINT('',#316329); +#316329 = CARTESIAN_POINT('',(139.275667,-154.332791,-3.5E-02)); +#316330 = LINE('',#316331,#316332); +#316331 = CARTESIAN_POINT('',(139.279634,-154.347596,-3.5E-02)); +#316332 = VECTOR('',#316333,1.); +#316333 = DIRECTION('',(-0.258819788117,0.965925627199,0.)); +#316334 = ORIENTED_EDGE('',*,*,#316335,.F.); +#316335 = EDGE_CURVE('',#316336,#316328,#316338,.T.); +#316336 = VERTEX_POINT('',#316337); +#316337 = CARTESIAN_POINT('',(139.275667,-154.332791,0.)); +#316338 = LINE('',#316339,#316340); +#316339 = CARTESIAN_POINT('',(139.275667,-154.332791,0.)); +#316340 = VECTOR('',#316341,1.); +#316341 = DIRECTION('',(0.,0.,-1.)); +#316342 = ORIENTED_EDGE('',*,*,#316343,.F.); +#316343 = EDGE_CURVE('',#316304,#316336,#316344,.T.); +#316344 = LINE('',#316345,#316346); +#316345 = CARTESIAN_POINT('',(139.279634,-154.347596,0.)); +#316346 = VECTOR('',#316347,1.); +#316347 = DIRECTION('',(-0.258819788117,0.965925627199,0.)); +#316348 = PLANE('',#316349); +#316349 = AXIS2_PLACEMENT_3D('',#316350,#316351,#316352); +#316350 = CARTESIAN_POINT('',(139.279634,-154.347596,0.)); +#316351 = DIRECTION('',(0.965925627199,0.258819788117,0.)); +#316352 = DIRECTION('',(-0.258819788117,0.965925627199,0.)); +#316353 = ADVANCED_FACE('',(#316354),#316379,.F.); +#316354 = FACE_BOUND('',#316355,.F.); +#316355 = EDGE_LOOP('',(#316356,#316357,#316365,#316373)); +#316356 = ORIENTED_EDGE('',*,*,#316335,.T.); +#316357 = ORIENTED_EDGE('',*,*,#316358,.T.); +#316358 = EDGE_CURVE('',#316328,#316359,#316361,.T.); +#316359 = VERTEX_POINT('',#316360); +#316360 = CARTESIAN_POINT('',(139.10863,-154.332791,-3.5E-02)); +#316361 = LINE('',#316362,#316363); +#316362 = CARTESIAN_POINT('',(139.275667,-154.332791,-3.5E-02)); +#316363 = VECTOR('',#316364,1.); +#316364 = DIRECTION('',(-1.,0.,0.)); +#316365 = ORIENTED_EDGE('',*,*,#316366,.F.); +#316366 = EDGE_CURVE('',#316367,#316359,#316369,.T.); +#316367 = VERTEX_POINT('',#316368); +#316368 = CARTESIAN_POINT('',(139.10863,-154.332791,0.)); +#316369 = LINE('',#316370,#316371); +#316370 = CARTESIAN_POINT('',(139.10863,-154.332791,0.)); +#316371 = VECTOR('',#316372,1.); +#316372 = DIRECTION('',(0.,0.,-1.)); +#316373 = ORIENTED_EDGE('',*,*,#316374,.F.); +#316374 = EDGE_CURVE('',#316336,#316367,#316375,.T.); +#316375 = LINE('',#316376,#316377); +#316376 = CARTESIAN_POINT('',(139.275667,-154.332791,0.)); +#316377 = VECTOR('',#316378,1.); +#316378 = DIRECTION('',(-1.,0.,0.)); +#316379 = PLANE('',#316380); +#316380 = AXIS2_PLACEMENT_3D('',#316381,#316382,#316383); +#316381 = CARTESIAN_POINT('',(139.275667,-154.332791,0.)); +#316382 = DIRECTION('',(0.,1.,0.)); +#316383 = DIRECTION('',(-1.,0.,0.)); +#316384 = ADVANCED_FACE('',(#316385),#316410,.F.); +#316385 = FACE_BOUND('',#316386,.F.); +#316386 = EDGE_LOOP('',(#316387,#316388,#316396,#316404)); +#316387 = ORIENTED_EDGE('',*,*,#316366,.T.); +#316388 = ORIENTED_EDGE('',*,*,#316389,.T.); +#316389 = EDGE_CURVE('',#316359,#316390,#316392,.T.); +#316390 = VERTEX_POINT('',#316391); +#316391 = CARTESIAN_POINT('',(138.205557,-155.233147,-3.5E-02)); +#316392 = LINE('',#316393,#316394); +#316393 = CARTESIAN_POINT('',(139.10863,-154.332791,-3.5E-02)); +#316394 = VECTOR('',#316395,1.); +#316395 = DIRECTION('',(-0.708171286484,-0.706040670924,0.)); +#316396 = ORIENTED_EDGE('',*,*,#316397,.F.); +#316397 = EDGE_CURVE('',#316398,#316390,#316400,.T.); +#316398 = VERTEX_POINT('',#316399); +#316399 = CARTESIAN_POINT('',(138.205557,-155.233147,0.)); +#316400 = LINE('',#316401,#316402); +#316401 = CARTESIAN_POINT('',(138.205557,-155.233147,0.)); +#316402 = VECTOR('',#316403,1.); +#316403 = DIRECTION('',(0.,0.,-1.)); +#316404 = ORIENTED_EDGE('',*,*,#316405,.F.); +#316405 = EDGE_CURVE('',#316367,#316398,#316406,.T.); +#316406 = LINE('',#316407,#316408); +#316407 = CARTESIAN_POINT('',(139.10863,-154.332791,0.)); +#316408 = VECTOR('',#316409,1.); +#316409 = DIRECTION('',(-0.708171286484,-0.706040670924,0.)); +#316410 = PLANE('',#316411); +#316411 = AXIS2_PLACEMENT_3D('',#316412,#316413,#316414); +#316412 = CARTESIAN_POINT('',(139.10863,-154.332791,0.)); +#316413 = DIRECTION('',(-0.706040670924,0.708171286484,0.)); +#316414 = DIRECTION('',(-0.708171286484,-0.706040670924,0.)); +#316415 = ADVANCED_FACE('',(#316416),#316441,.F.); +#316416 = FACE_BOUND('',#316417,.F.); +#316417 = EDGE_LOOP('',(#316418,#316419,#316427,#316435)); +#316418 = ORIENTED_EDGE('',*,*,#316397,.T.); +#316419 = ORIENTED_EDGE('',*,*,#316420,.T.); +#316420 = EDGE_CURVE('',#316390,#316421,#316423,.T.); +#316421 = VERTEX_POINT('',#316422); +#316422 = CARTESIAN_POINT('',(138.169509,-155.248079,-3.5E-02)); +#316423 = LINE('',#316424,#316425); +#316424 = CARTESIAN_POINT('',(138.205557,-155.233147,-3.5E-02)); +#316425 = VECTOR('',#316426,1.); +#316426 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#316427 = ORIENTED_EDGE('',*,*,#316428,.F.); +#316428 = EDGE_CURVE('',#316429,#316421,#316431,.T.); +#316429 = VERTEX_POINT('',#316430); +#316430 = CARTESIAN_POINT('',(138.169509,-155.248079,0.)); +#316431 = LINE('',#316432,#316433); +#316432 = CARTESIAN_POINT('',(138.169509,-155.248079,0.)); +#316433 = VECTOR('',#316434,1.); +#316434 = DIRECTION('',(0.,0.,-1.)); +#316435 = ORIENTED_EDGE('',*,*,#316436,.F.); +#316436 = EDGE_CURVE('',#316398,#316429,#316437,.T.); +#316437 = LINE('',#316438,#316439); +#316438 = CARTESIAN_POINT('',(138.205557,-155.233147,0.)); +#316439 = VECTOR('',#316440,1.); +#316440 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#316441 = PLANE('',#316442); +#316442 = AXIS2_PLACEMENT_3D('',#316443,#316444,#316445); +#316443 = CARTESIAN_POINT('',(138.205557,-155.233147,0.)); +#316444 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#316445 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#316446 = ADVANCED_FACE('',(#316447),#316472,.F.); +#316447 = FACE_BOUND('',#316448,.F.); +#316448 = EDGE_LOOP('',(#316449,#316450,#316458,#316466)); +#316449 = ORIENTED_EDGE('',*,*,#316428,.T.); +#316450 = ORIENTED_EDGE('',*,*,#316451,.T.); +#316451 = EDGE_CURVE('',#316421,#316452,#316454,.T.); +#316452 = VERTEX_POINT('',#316453); +#316453 = CARTESIAN_POINT('',(137.380491,-155.248079,-3.5E-02)); +#316454 = LINE('',#316455,#316456); +#316455 = CARTESIAN_POINT('',(138.169509,-155.248079,-3.5E-02)); +#316456 = VECTOR('',#316457,1.); +#316457 = DIRECTION('',(-1.,0.,0.)); +#316458 = ORIENTED_EDGE('',*,*,#316459,.F.); +#316459 = EDGE_CURVE('',#316460,#316452,#316462,.T.); +#316460 = VERTEX_POINT('',#316461); +#316461 = CARTESIAN_POINT('',(137.380491,-155.248079,0.)); +#316462 = LINE('',#316463,#316464); +#316463 = CARTESIAN_POINT('',(137.380491,-155.248079,0.)); +#316464 = VECTOR('',#316465,1.); +#316465 = DIRECTION('',(0.,0.,-1.)); +#316466 = ORIENTED_EDGE('',*,*,#316467,.F.); +#316467 = EDGE_CURVE('',#316429,#316460,#316468,.T.); +#316468 = LINE('',#316469,#316470); +#316469 = CARTESIAN_POINT('',(138.169509,-155.248079,0.)); +#316470 = VECTOR('',#316471,1.); +#316471 = DIRECTION('',(-1.,0.,0.)); +#316472 = PLANE('',#316473); +#316473 = AXIS2_PLACEMENT_3D('',#316474,#316475,#316476); +#316474 = CARTESIAN_POINT('',(138.169509,-155.248079,0.)); +#316475 = DIRECTION('',(0.,1.,0.)); +#316476 = DIRECTION('',(-1.,0.,0.)); +#316477 = ADVANCED_FACE('',(#316478),#316503,.F.); +#316478 = FACE_BOUND('',#316479,.F.); +#316479 = EDGE_LOOP('',(#316480,#316481,#316489,#316497)); +#316480 = ORIENTED_EDGE('',*,*,#316459,.T.); +#316481 = ORIENTED_EDGE('',*,*,#316482,.T.); +#316482 = EDGE_CURVE('',#316452,#316483,#316485,.T.); +#316483 = VERTEX_POINT('',#316484); +#316484 = CARTESIAN_POINT('',(137.344443,-155.233147,-3.5E-02)); +#316485 = LINE('',#316486,#316487); +#316486 = CARTESIAN_POINT('',(137.380491,-155.248079,-3.5E-02)); +#316487 = VECTOR('',#316488,1.); +#316488 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#316489 = ORIENTED_EDGE('',*,*,#316490,.F.); +#316490 = EDGE_CURVE('',#316491,#316483,#316493,.T.); +#316491 = VERTEX_POINT('',#316492); +#316492 = CARTESIAN_POINT('',(137.344443,-155.233147,0.)); +#316493 = LINE('',#316494,#316495); +#316494 = CARTESIAN_POINT('',(137.344443,-155.233147,0.)); +#316495 = VECTOR('',#316496,1.); +#316496 = DIRECTION('',(0.,0.,-1.)); +#316497 = ORIENTED_EDGE('',*,*,#316498,.F.); +#316498 = EDGE_CURVE('',#316460,#316491,#316499,.T.); +#316499 = LINE('',#316500,#316501); +#316500 = CARTESIAN_POINT('',(137.380491,-155.248079,0.)); +#316501 = VECTOR('',#316502,1.); +#316502 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#316503 = PLANE('',#316504); +#316504 = AXIS2_PLACEMENT_3D('',#316505,#316506,#316507); +#316505 = CARTESIAN_POINT('',(137.380491,-155.248079,0.)); +#316506 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#316507 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#316508 = ADVANCED_FACE('',(#316509),#316534,.F.); +#316509 = FACE_BOUND('',#316510,.F.); +#316510 = EDGE_LOOP('',(#316511,#316512,#316520,#316528)); +#316511 = ORIENTED_EDGE('',*,*,#316490,.T.); +#316512 = ORIENTED_EDGE('',*,*,#316513,.T.); +#316513 = EDGE_CURVE('',#316483,#316514,#316516,.T.); +#316514 = VERTEX_POINT('',#316515); +#316515 = CARTESIAN_POINT('',(136.708578,-154.6,-3.5E-02)); +#316516 = LINE('',#316517,#316518); +#316517 = CARTESIAN_POINT('',(137.344443,-155.233147,-3.5E-02)); +#316518 = VECTOR('',#316519,1.); +#316519 = DIRECTION('',(-0.708619653899,0.705590664697,0.)); +#316520 = ORIENTED_EDGE('',*,*,#316521,.F.); +#316521 = EDGE_CURVE('',#316522,#316514,#316524,.T.); +#316522 = VERTEX_POINT('',#316523); +#316523 = CARTESIAN_POINT('',(136.708578,-154.6,0.)); +#316524 = LINE('',#316525,#316526); +#316525 = CARTESIAN_POINT('',(136.708578,-154.6,0.)); +#316526 = VECTOR('',#316527,1.); +#316527 = DIRECTION('',(0.,0.,-1.)); +#316528 = ORIENTED_EDGE('',*,*,#316529,.F.); +#316529 = EDGE_CURVE('',#316491,#316522,#316530,.T.); +#316530 = LINE('',#316531,#316532); +#316531 = CARTESIAN_POINT('',(137.344443,-155.233147,0.)); +#316532 = VECTOR('',#316533,1.); +#316533 = DIRECTION('',(-0.708619653899,0.705590664697,0.)); +#316534 = PLANE('',#316535); +#316535 = AXIS2_PLACEMENT_3D('',#316536,#316537,#316538); +#316536 = CARTESIAN_POINT('',(137.344443,-155.233147,0.)); +#316537 = DIRECTION('',(0.705590664697,0.708619653899,0.)); +#316538 = DIRECTION('',(-0.708619653899,0.705590664697,0.)); +#316539 = ADVANCED_FACE('',(#316540),#316565,.F.); +#316540 = FACE_BOUND('',#316541,.F.); +#316541 = EDGE_LOOP('',(#316542,#316543,#316551,#316559)); +#316542 = ORIENTED_EDGE('',*,*,#316521,.T.); +#316543 = ORIENTED_EDGE('',*,*,#316544,.T.); +#316544 = EDGE_CURVE('',#316514,#316545,#316547,.T.); +#316545 = VERTEX_POINT('',#316546); +#316546 = CARTESIAN_POINT('',(135.706806,-154.598079,-3.5E-02)); +#316547 = LINE('',#316548,#316549); +#316548 = CARTESIAN_POINT('',(136.708578,-154.6,-3.5E-02)); +#316549 = VECTOR('',#316550,1.); +#316550 = DIRECTION('',(-0.999998161406,1.91759848353E-03,0.)); +#316551 = ORIENTED_EDGE('',*,*,#316552,.F.); +#316552 = EDGE_CURVE('',#316553,#316545,#316555,.T.); +#316553 = VERTEX_POINT('',#316554); +#316554 = CARTESIAN_POINT('',(135.706806,-154.598079,0.)); +#316555 = LINE('',#316556,#316557); +#316556 = CARTESIAN_POINT('',(135.706806,-154.598079,0.)); +#316557 = VECTOR('',#316558,1.); +#316558 = DIRECTION('',(0.,0.,-1.)); +#316559 = ORIENTED_EDGE('',*,*,#316560,.F.); +#316560 = EDGE_CURVE('',#316522,#316553,#316561,.T.); +#316561 = LINE('',#316562,#316563); +#316562 = CARTESIAN_POINT('',(136.708578,-154.6,0.)); +#316563 = VECTOR('',#316564,1.); +#316564 = DIRECTION('',(-0.999998161406,1.91759848353E-03,0.)); +#316565 = PLANE('',#316566); +#316566 = AXIS2_PLACEMENT_3D('',#316567,#316568,#316569); +#316567 = CARTESIAN_POINT('',(136.708578,-154.6,0.)); +#316568 = DIRECTION('',(1.91759848353E-03,0.999998161406,0.)); +#316569 = DIRECTION('',(-0.999998161406,1.91759848353E-03,0.)); +#316570 = ADVANCED_FACE('',(#316571),#316596,.F.); +#316571 = FACE_BOUND('',#316572,.F.); +#316572 = EDGE_LOOP('',(#316573,#316574,#316582,#316590)); +#316573 = ORIENTED_EDGE('',*,*,#316552,.T.); +#316574 = ORIENTED_EDGE('',*,*,#316575,.T.); +#316575 = EDGE_CURVE('',#316545,#316576,#316578,.T.); +#316576 = VERTEX_POINT('',#316577); +#316577 = CARTESIAN_POINT('',(135.670758,-154.583148,-3.5E-02)); +#316578 = LINE('',#316579,#316580); +#316579 = CARTESIAN_POINT('',(135.706806,-154.598079,-3.5E-02)); +#316580 = VECTOR('',#316581,1.); +#316581 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#316582 = ORIENTED_EDGE('',*,*,#316583,.F.); +#316583 = EDGE_CURVE('',#316584,#316576,#316586,.T.); +#316584 = VERTEX_POINT('',#316585); +#316585 = CARTESIAN_POINT('',(135.670758,-154.583148,0.)); +#316586 = LINE('',#316587,#316588); +#316587 = CARTESIAN_POINT('',(135.670758,-154.583148,0.)); +#316588 = VECTOR('',#316589,1.); +#316589 = DIRECTION('',(0.,0.,-1.)); +#316590 = ORIENTED_EDGE('',*,*,#316591,.F.); +#316591 = EDGE_CURVE('',#316553,#316584,#316592,.T.); +#316592 = LINE('',#316593,#316594); +#316593 = CARTESIAN_POINT('',(135.706806,-154.598079,0.)); +#316594 = VECTOR('',#316595,1.); +#316595 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#316596 = PLANE('',#316597); +#316597 = AXIS2_PLACEMENT_3D('',#316598,#316599,#316600); +#316598 = CARTESIAN_POINT('',(135.706806,-154.598079,0.)); +#316599 = DIRECTION('',(0.382670952169,0.923884701879,0.)); +#316600 = DIRECTION('',(-0.923884701879,0.382670952169,0.)); +#316601 = ADVANCED_FACE('',(#316602),#316627,.F.); +#316602 = FACE_BOUND('',#316603,.F.); +#316603 = EDGE_LOOP('',(#316604,#316605,#316613,#316621)); +#316604 = ORIENTED_EDGE('',*,*,#316583,.T.); +#316605 = ORIENTED_EDGE('',*,*,#316606,.T.); +#316606 = EDGE_CURVE('',#316576,#316607,#316609,.T.); +#316607 = VERTEX_POINT('',#316608); +#316608 = CARTESIAN_POINT('',(135.598176,-154.513283,-3.5E-02)); +#316609 = LINE('',#316610,#316611); +#316610 = CARTESIAN_POINT('',(135.670758,-154.583148,-3.5E-02)); +#316611 = VECTOR('',#316612,1.); +#316612 = DIRECTION('',(-0.720462923472,0.693493457721,0.)); +#316613 = ORIENTED_EDGE('',*,*,#316614,.F.); +#316614 = EDGE_CURVE('',#316615,#316607,#316617,.T.); +#316615 = VERTEX_POINT('',#316616); +#316616 = CARTESIAN_POINT('',(135.598176,-154.513283,0.)); +#316617 = LINE('',#316618,#316619); +#316618 = CARTESIAN_POINT('',(135.598176,-154.513283,0.)); +#316619 = VECTOR('',#316620,1.); +#316620 = DIRECTION('',(0.,0.,-1.)); +#316621 = ORIENTED_EDGE('',*,*,#316622,.F.); +#316622 = EDGE_CURVE('',#316584,#316615,#316623,.T.); +#316623 = LINE('',#316624,#316625); +#316624 = CARTESIAN_POINT('',(135.670758,-154.583148,0.)); +#316625 = VECTOR('',#316626,1.); +#316626 = DIRECTION('',(-0.720462923472,0.693493457721,0.)); +#316627 = PLANE('',#316628); +#316628 = AXIS2_PLACEMENT_3D('',#316629,#316630,#316631); +#316629 = CARTESIAN_POINT('',(135.670758,-154.583148,0.)); +#316630 = DIRECTION('',(0.693493457721,0.720462923472,0.)); +#316631 = DIRECTION('',(-0.720462923472,0.693493457721,0.)); +#316632 = ADVANCED_FACE('',(#316633),#316658,.F.); +#316633 = FACE_BOUND('',#316634,.F.); +#316634 = EDGE_LOOP('',(#316635,#316636,#316644,#316652)); +#316635 = ORIENTED_EDGE('',*,*,#316614,.T.); +#316636 = ORIENTED_EDGE('',*,*,#316637,.T.); +#316637 = EDGE_CURVE('',#316607,#316638,#316640,.T.); +#316638 = VERTEX_POINT('',#316639); +#316639 = CARTESIAN_POINT('',(135.584903,-154.520947,-3.5E-02)); +#316640 = LINE('',#316641,#316642); +#316641 = CARTESIAN_POINT('',(135.598176,-154.513283,-3.5E-02)); +#316642 = VECTOR('',#316643,1.); +#316643 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#316644 = ORIENTED_EDGE('',*,*,#316645,.F.); +#316645 = EDGE_CURVE('',#316646,#316638,#316648,.T.); +#316646 = VERTEX_POINT('',#316647); +#316647 = CARTESIAN_POINT('',(135.584903,-154.520947,0.)); +#316648 = LINE('',#316649,#316650); +#316649 = CARTESIAN_POINT('',(135.584903,-154.520947,0.)); +#316650 = VECTOR('',#316651,1.); +#316651 = DIRECTION('',(0.,0.,-1.)); +#316652 = ORIENTED_EDGE('',*,*,#316653,.F.); +#316653 = EDGE_CURVE('',#316615,#316646,#316654,.T.); +#316654 = LINE('',#316655,#316656); +#316655 = CARTESIAN_POINT('',(135.598176,-154.513283,0.)); +#316656 = VECTOR('',#316657,1.); +#316657 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#316658 = PLANE('',#316659); +#316659 = AXIS2_PLACEMENT_3D('',#316660,#316661,#316662); +#316660 = CARTESIAN_POINT('',(135.598176,-154.513283,0.)); +#316661 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#316662 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#316663 = ADVANCED_FACE('',(#316664),#316691,.T.); +#316664 = FACE_BOUND('',#316665,.F.); +#316665 = EDGE_LOOP('',(#316666,#316667,#316676,#316684)); +#316666 = ORIENTED_EDGE('',*,*,#316645,.T.); +#316667 = ORIENTED_EDGE('',*,*,#316668,.T.); +#316668 = EDGE_CURVE('',#316638,#316669,#316671,.T.); +#316669 = VERTEX_POINT('',#316670); +#316670 = CARTESIAN_POINT('',(135.747262,-154.358588,-3.5E-02)); +#316671 = CIRCLE('',#316672,0.299999934501); +#316672 = AXIS2_PLACEMENT_3D('',#316673,#316674,#316675); +#316673 = CARTESIAN_POINT('',(135.47009814059,-154.2437831405,-3.5E-02) + ); +#316674 = DIRECTION('',(0.,0.,-1.)); +#316675 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#316676 = ORIENTED_EDGE('',*,*,#316677,.F.); +#316677 = EDGE_CURVE('',#316678,#316669,#316680,.T.); +#316678 = VERTEX_POINT('',#316679); +#316679 = CARTESIAN_POINT('',(135.747262,-154.358588,0.)); +#316680 = LINE('',#316681,#316682); +#316681 = CARTESIAN_POINT('',(135.747262,-154.358588,0.)); +#316682 = VECTOR('',#316683,1.); +#316683 = DIRECTION('',(0.,0.,-1.)); +#316684 = ORIENTED_EDGE('',*,*,#316685,.F.); +#316685 = EDGE_CURVE('',#316646,#316678,#316686,.T.); +#316686 = CIRCLE('',#316687,0.299999934501); +#316687 = AXIS2_PLACEMENT_3D('',#316688,#316689,#316690); +#316688 = CARTESIAN_POINT('',(135.47009814059,-154.2437831405,0.)); +#316689 = DIRECTION('',(0.,0.,-1.)); +#316690 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#316691 = CYLINDRICAL_SURFACE('',#316692,0.299999934501); +#316692 = AXIS2_PLACEMENT_3D('',#316693,#316694,#316695); +#316693 = CARTESIAN_POINT('',(135.47009814059,-154.2437831405,0.)); +#316694 = DIRECTION('',(-0.,-0.,1.)); +#316695 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#316696 = ADVANCED_FACE('',(#316697),#316722,.F.); +#316697 = FACE_BOUND('',#316698,.F.); +#316698 = EDGE_LOOP('',(#316699,#316700,#316708,#316716)); +#316699 = ORIENTED_EDGE('',*,*,#316677,.T.); +#316700 = ORIENTED_EDGE('',*,*,#316701,.T.); +#316701 = EDGE_CURVE('',#316669,#316702,#316704,.T.); +#316702 = VERTEX_POINT('',#316703); +#316703 = CARTESIAN_POINT('',(135.739598,-154.371861,-3.5E-02)); +#316704 = LINE('',#316705,#316706); +#316705 = CARTESIAN_POINT('',(135.747262,-154.358588,-3.5E-02)); +#316706 = VECTOR('',#316707,1.); +#316707 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#316708 = ORIENTED_EDGE('',*,*,#316709,.F.); +#316709 = EDGE_CURVE('',#316710,#316702,#316712,.T.); +#316710 = VERTEX_POINT('',#316711); +#316711 = CARTESIAN_POINT('',(135.739598,-154.371861,0.)); +#316712 = LINE('',#316713,#316714); +#316713 = CARTESIAN_POINT('',(135.739598,-154.371861,0.)); +#316714 = VECTOR('',#316715,1.); +#316715 = DIRECTION('',(0.,0.,-1.)); +#316716 = ORIENTED_EDGE('',*,*,#316717,.F.); +#316717 = EDGE_CURVE('',#316678,#316710,#316718,.T.); +#316718 = LINE('',#316719,#316720); +#316719 = CARTESIAN_POINT('',(135.747262,-154.358588,0.)); +#316720 = VECTOR('',#316721,1.); +#316721 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#316722 = PLANE('',#316723); +#316723 = AXIS2_PLACEMENT_3D('',#316724,#316725,#316726); +#316724 = CARTESIAN_POINT('',(135.747262,-154.358588,0.)); +#316725 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#316726 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#316727 = ADVANCED_FACE('',(#316728),#316753,.F.); +#316728 = FACE_BOUND('',#316729,.F.); +#316729 = EDGE_LOOP('',(#316730,#316731,#316739,#316747)); +#316730 = ORIENTED_EDGE('',*,*,#316709,.T.); +#316731 = ORIENTED_EDGE('',*,*,#316732,.T.); +#316732 = EDGE_CURVE('',#316702,#316733,#316735,.T.); +#316733 = VERTEX_POINT('',#316734); +#316734 = CARTESIAN_POINT('',(135.767736,-154.4,-3.5E-02)); +#316735 = LINE('',#316736,#316737); +#316736 = CARTESIAN_POINT('',(135.739598,-154.371861,-3.5E-02)); +#316737 = VECTOR('',#316738,1.); +#316738 = DIRECTION('',(0.707094216319,-0.707119345831,0.)); +#316739 = ORIENTED_EDGE('',*,*,#316740,.F.); +#316740 = EDGE_CURVE('',#316741,#316733,#316743,.T.); +#316741 = VERTEX_POINT('',#316742); +#316742 = CARTESIAN_POINT('',(135.767736,-154.4,0.)); +#316743 = LINE('',#316744,#316745); +#316744 = CARTESIAN_POINT('',(135.767736,-154.4,0.)); +#316745 = VECTOR('',#316746,1.); +#316746 = DIRECTION('',(0.,0.,-1.)); +#316747 = ORIENTED_EDGE('',*,*,#316748,.F.); +#316748 = EDGE_CURVE('',#316710,#316741,#316749,.T.); +#316749 = LINE('',#316750,#316751); +#316750 = CARTESIAN_POINT('',(135.739598,-154.371861,0.)); +#316751 = VECTOR('',#316752,1.); +#316752 = DIRECTION('',(0.707094216319,-0.707119345831,0.)); +#316753 = PLANE('',#316754); +#316754 = AXIS2_PLACEMENT_3D('',#316755,#316756,#316757); +#316755 = CARTESIAN_POINT('',(135.739598,-154.371861,0.)); +#316756 = DIRECTION('',(-0.707119345831,-0.707094216319,-0.)); +#316757 = DIRECTION('',(0.707094216319,-0.707119345831,0.)); +#316758 = ADVANCED_FACE('',(#316759),#316784,.F.); +#316759 = FACE_BOUND('',#316760,.F.); +#316760 = EDGE_LOOP('',(#316761,#316762,#316770,#316778)); +#316761 = ORIENTED_EDGE('',*,*,#316740,.T.); +#316762 = ORIENTED_EDGE('',*,*,#316763,.T.); +#316763 = EDGE_CURVE('',#316733,#316764,#316766,.T.); +#316764 = VERTEX_POINT('',#316765); +#316765 = CARTESIAN_POINT('',(136.769509,-154.401921,-3.5E-02)); +#316766 = LINE('',#316767,#316768); +#316767 = CARTESIAN_POINT('',(135.767736,-154.4,-3.5E-02)); +#316768 = VECTOR('',#316769,1.); +#316769 = DIRECTION('',(0.99999816141,-1.917596569333E-03,0.)); +#316770 = ORIENTED_EDGE('',*,*,#316771,.F.); +#316771 = EDGE_CURVE('',#316772,#316764,#316774,.T.); +#316772 = VERTEX_POINT('',#316773); +#316773 = CARTESIAN_POINT('',(136.769509,-154.401921,0.)); +#316774 = LINE('',#316775,#316776); +#316775 = CARTESIAN_POINT('',(136.769509,-154.401921,0.)); +#316776 = VECTOR('',#316777,1.); +#316777 = DIRECTION('',(0.,0.,-1.)); +#316778 = ORIENTED_EDGE('',*,*,#316779,.F.); +#316779 = EDGE_CURVE('',#316741,#316772,#316780,.T.); +#316780 = LINE('',#316781,#316782); +#316781 = CARTESIAN_POINT('',(135.767736,-154.4,0.)); +#316782 = VECTOR('',#316783,1.); +#316783 = DIRECTION('',(0.99999816141,-1.917596569333E-03,0.)); +#316784 = PLANE('',#316785); +#316785 = AXIS2_PLACEMENT_3D('',#316786,#316787,#316788); +#316786 = CARTESIAN_POINT('',(135.767736,-154.4,0.)); +#316787 = DIRECTION('',(-1.917596569333E-03,-0.99999816141,-0.)); +#316788 = DIRECTION('',(0.99999816141,-1.917596569333E-03,0.)); +#316789 = ADVANCED_FACE('',(#316790),#316815,.F.); +#316790 = FACE_BOUND('',#316791,.F.); +#316791 = EDGE_LOOP('',(#316792,#316793,#316801,#316809)); +#316792 = ORIENTED_EDGE('',*,*,#316771,.T.); +#316793 = ORIENTED_EDGE('',*,*,#316794,.T.); +#316794 = EDGE_CURVE('',#316764,#316795,#316797,.T.); +#316795 = VERTEX_POINT('',#316796); +#316796 = CARTESIAN_POINT('',(136.805557,-154.416853,-3.5E-02)); +#316797 = LINE('',#316798,#316799); +#316798 = CARTESIAN_POINT('',(136.769509,-154.401921,-3.5E-02)); +#316799 = VECTOR('',#316800,1.); +#316800 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#316801 = ORIENTED_EDGE('',*,*,#316802,.F.); +#316802 = EDGE_CURVE('',#316803,#316795,#316805,.T.); +#316803 = VERTEX_POINT('',#316804); +#316804 = CARTESIAN_POINT('',(136.805557,-154.416853,0.)); +#316805 = LINE('',#316806,#316807); +#316806 = CARTESIAN_POINT('',(136.805557,-154.416853,0.)); +#316807 = VECTOR('',#316808,1.); +#316808 = DIRECTION('',(0.,0.,-1.)); +#316809 = ORIENTED_EDGE('',*,*,#316810,.F.); +#316810 = EDGE_CURVE('',#316772,#316803,#316811,.T.); +#316811 = LINE('',#316812,#316813); +#316812 = CARTESIAN_POINT('',(136.769509,-154.401921,0.)); +#316813 = VECTOR('',#316814,1.); +#316814 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#316815 = PLANE('',#316816); +#316816 = AXIS2_PLACEMENT_3D('',#316817,#316818,#316819); +#316817 = CARTESIAN_POINT('',(136.769509,-154.401921,0.)); +#316818 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#316819 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#316820 = ADVANCED_FACE('',(#316821),#316846,.F.); +#316821 = FACE_BOUND('',#316822,.F.); +#316822 = EDGE_LOOP('',(#316823,#316824,#316832,#316840)); +#316823 = ORIENTED_EDGE('',*,*,#316802,.T.); +#316824 = ORIENTED_EDGE('',*,*,#316825,.T.); +#316825 = EDGE_CURVE('',#316795,#316826,#316828,.T.); +#316826 = VERTEX_POINT('',#316827); +#316827 = CARTESIAN_POINT('',(137.4,-155.008578,-3.5E-02)); +#316828 = LINE('',#316829,#316830); +#316829 = CARTESIAN_POINT('',(136.805557,-154.416853,-3.5E-02)); +#316830 = VECTOR('',#316831,1.); +#316831 = DIRECTION('',(0.708725193792,-0.705484655882,0.)); +#316832 = ORIENTED_EDGE('',*,*,#316833,.F.); +#316833 = EDGE_CURVE('',#316834,#316826,#316836,.T.); +#316834 = VERTEX_POINT('',#316835); +#316835 = CARTESIAN_POINT('',(137.4,-155.008578,0.)); +#316836 = LINE('',#316837,#316838); +#316837 = CARTESIAN_POINT('',(137.4,-155.008578,0.)); +#316838 = VECTOR('',#316839,1.); +#316839 = DIRECTION('',(0.,0.,-1.)); +#316840 = ORIENTED_EDGE('',*,*,#316841,.F.); +#316841 = EDGE_CURVE('',#316803,#316834,#316842,.T.); +#316842 = LINE('',#316843,#316844); +#316843 = CARTESIAN_POINT('',(136.805557,-154.416853,0.)); +#316844 = VECTOR('',#316845,1.); +#316845 = DIRECTION('',(0.708725193792,-0.705484655882,0.)); +#316846 = PLANE('',#316847); +#316847 = AXIS2_PLACEMENT_3D('',#316848,#316849,#316850); +#316848 = CARTESIAN_POINT('',(136.805557,-154.416853,0.)); +#316849 = DIRECTION('',(-0.705484655882,-0.708725193792,-0.)); +#316850 = DIRECTION('',(0.708725193792,-0.705484655882,0.)); +#316851 = ADVANCED_FACE('',(#316852),#316877,.F.); +#316852 = FACE_BOUND('',#316853,.F.); +#316853 = EDGE_LOOP('',(#316854,#316855,#316863,#316871)); +#316854 = ORIENTED_EDGE('',*,*,#316833,.T.); +#316855 = ORIENTED_EDGE('',*,*,#316856,.T.); +#316856 = EDGE_CURVE('',#316826,#316857,#316859,.T.); +#316857 = VERTEX_POINT('',#316858); +#316858 = CARTESIAN_POINT('',(138.1,-154.308578,-3.5E-02)); +#316859 = LINE('',#316860,#316861); +#316860 = CARTESIAN_POINT('',(137.4,-155.008578,-3.5E-02)); +#316861 = VECTOR('',#316862,1.); +#316862 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#316863 = ORIENTED_EDGE('',*,*,#316864,.F.); +#316864 = EDGE_CURVE('',#316865,#316857,#316867,.T.); +#316865 = VERTEX_POINT('',#316866); +#316866 = CARTESIAN_POINT('',(138.1,-154.308578,0.)); +#316867 = LINE('',#316868,#316869); +#316868 = CARTESIAN_POINT('',(138.1,-154.308578,0.)); +#316869 = VECTOR('',#316870,1.); +#316870 = DIRECTION('',(0.,0.,-1.)); +#316871 = ORIENTED_EDGE('',*,*,#316872,.F.); +#316872 = EDGE_CURVE('',#316834,#316865,#316873,.T.); +#316873 = LINE('',#316874,#316875); +#316874 = CARTESIAN_POINT('',(137.4,-155.008578,0.)); +#316875 = VECTOR('',#316876,1.); +#316876 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#316877 = PLANE('',#316878); +#316878 = AXIS2_PLACEMENT_3D('',#316879,#316880,#316881); +#316879 = CARTESIAN_POINT('',(137.4,-155.008578,0.)); +#316880 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#316881 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#316882 = ADVANCED_FACE('',(#316883),#316908,.F.); +#316883 = FACE_BOUND('',#316884,.F.); +#316884 = EDGE_LOOP('',(#316885,#316886,#316894,#316902)); +#316885 = ORIENTED_EDGE('',*,*,#316864,.T.); +#316886 = ORIENTED_EDGE('',*,*,#316887,.T.); +#316887 = EDGE_CURVE('',#316857,#316888,#316890,.T.); +#316888 = VERTEX_POINT('',#316889); +#316889 = CARTESIAN_POINT('',(138.1,-153.741421,-3.5E-02)); +#316890 = LINE('',#316891,#316892); +#316891 = CARTESIAN_POINT('',(138.1,-154.308578,-3.5E-02)); +#316892 = VECTOR('',#316893,1.); +#316893 = DIRECTION('',(0.,1.,0.)); +#316894 = ORIENTED_EDGE('',*,*,#316895,.F.); +#316895 = EDGE_CURVE('',#316896,#316888,#316898,.T.); +#316896 = VERTEX_POINT('',#316897); +#316897 = CARTESIAN_POINT('',(138.1,-153.741421,0.)); +#316898 = LINE('',#316899,#316900); +#316899 = CARTESIAN_POINT('',(138.1,-153.741421,0.)); +#316900 = VECTOR('',#316901,1.); +#316901 = DIRECTION('',(0.,0.,-1.)); +#316902 = ORIENTED_EDGE('',*,*,#316903,.F.); +#316903 = EDGE_CURVE('',#316865,#316896,#316904,.T.); +#316904 = LINE('',#316905,#316906); +#316905 = CARTESIAN_POINT('',(138.1,-154.308578,0.)); +#316906 = VECTOR('',#316907,1.); +#316907 = DIRECTION('',(0.,1.,0.)); +#316908 = PLANE('',#316909); +#316909 = AXIS2_PLACEMENT_3D('',#316910,#316911,#316912); +#316910 = CARTESIAN_POINT('',(138.1,-154.308578,0.)); +#316911 = DIRECTION('',(1.,-0.,0.)); +#316912 = DIRECTION('',(0.,1.,0.)); +#316913 = ADVANCED_FACE('',(#316914),#316939,.F.); +#316914 = FACE_BOUND('',#316915,.F.); +#316915 = EDGE_LOOP('',(#316916,#316917,#316925,#316933)); +#316916 = ORIENTED_EDGE('',*,*,#316895,.T.); +#316917 = ORIENTED_EDGE('',*,*,#316918,.T.); +#316918 = EDGE_CURVE('',#316888,#316919,#316921,.T.); +#316919 = VERTEX_POINT('',#316920); +#316920 = CARTESIAN_POINT('',(135.458578,-151.1,-3.5E-02)); +#316921 = LINE('',#316922,#316923); +#316922 = CARTESIAN_POINT('',(138.1,-153.741421,-3.5E-02)); +#316923 = VECTOR('',#316924,1.); +#316924 = DIRECTION('',(-0.707106915036,0.707106647337,0.)); +#316925 = ORIENTED_EDGE('',*,*,#316926,.F.); +#316926 = EDGE_CURVE('',#316927,#316919,#316929,.T.); +#316927 = VERTEX_POINT('',#316928); +#316928 = CARTESIAN_POINT('',(135.458578,-151.1,0.)); +#316929 = LINE('',#316930,#316931); +#316930 = CARTESIAN_POINT('',(135.458578,-151.1,0.)); +#316931 = VECTOR('',#316932,1.); +#316932 = DIRECTION('',(0.,0.,-1.)); +#316933 = ORIENTED_EDGE('',*,*,#316934,.F.); +#316934 = EDGE_CURVE('',#316896,#316927,#316935,.T.); +#316935 = LINE('',#316936,#316937); +#316936 = CARTESIAN_POINT('',(138.1,-153.741421,0.)); +#316937 = VECTOR('',#316938,1.); +#316938 = DIRECTION('',(-0.707106915036,0.707106647337,0.)); +#316939 = PLANE('',#316940); +#316940 = AXIS2_PLACEMENT_3D('',#316941,#316942,#316943); +#316941 = CARTESIAN_POINT('',(138.1,-153.741421,0.)); +#316942 = DIRECTION('',(0.707106647337,0.707106915036,0.)); +#316943 = DIRECTION('',(-0.707106915036,0.707106647337,0.)); +#316944 = ADVANCED_FACE('',(#316945),#316970,.F.); +#316945 = FACE_BOUND('',#316946,.F.); +#316946 = EDGE_LOOP('',(#316947,#316948,#316956,#316964)); +#316947 = ORIENTED_EDGE('',*,*,#316926,.T.); +#316948 = ORIENTED_EDGE('',*,*,#316949,.T.); +#316949 = EDGE_CURVE('',#316919,#316950,#316952,.T.); +#316950 = VERTEX_POINT('',#316951); +#316951 = CARTESIAN_POINT('',(133.080491,-151.098079,-3.5E-02)); +#316952 = LINE('',#316953,#316954); +#316953 = CARTESIAN_POINT('',(135.458578,-151.1,-3.5E-02)); +#316954 = VECTOR('',#316955,1.); +#316955 = DIRECTION('',(-0.999999673736,8.077918819743E-04,0.)); +#316956 = ORIENTED_EDGE('',*,*,#316957,.F.); +#316957 = EDGE_CURVE('',#316958,#316950,#316960,.T.); +#316958 = VERTEX_POINT('',#316959); +#316959 = CARTESIAN_POINT('',(133.080491,-151.098079,0.)); +#316960 = LINE('',#316961,#316962); +#316961 = CARTESIAN_POINT('',(133.080491,-151.098079,0.)); +#316962 = VECTOR('',#316963,1.); +#316963 = DIRECTION('',(0.,0.,-1.)); +#316964 = ORIENTED_EDGE('',*,*,#316965,.F.); +#316965 = EDGE_CURVE('',#316927,#316958,#316966,.T.); +#316966 = LINE('',#316967,#316968); +#316967 = CARTESIAN_POINT('',(135.458578,-151.1,0.)); +#316968 = VECTOR('',#316969,1.); +#316969 = DIRECTION('',(-0.999999673736,8.077918819743E-04,0.)); +#316970 = PLANE('',#316971); +#316971 = AXIS2_PLACEMENT_3D('',#316972,#316973,#316974); +#316972 = CARTESIAN_POINT('',(135.458578,-151.1,0.)); +#316973 = DIRECTION('',(8.077918819743E-04,0.999999673736,0.)); +#316974 = DIRECTION('',(-0.999999673736,8.077918819743E-04,0.)); +#316975 = ADVANCED_FACE('',(#316976),#317001,.F.); +#316976 = FACE_BOUND('',#316977,.F.); +#316977 = EDGE_LOOP('',(#316978,#316979,#316987,#316995)); +#316978 = ORIENTED_EDGE('',*,*,#316957,.T.); +#316979 = ORIENTED_EDGE('',*,*,#316980,.T.); +#316980 = EDGE_CURVE('',#316950,#316981,#316983,.T.); +#316981 = VERTEX_POINT('',#316982); +#316982 = CARTESIAN_POINT('',(133.076143,-151.096278,-3.5E-02)); +#316983 = LINE('',#316984,#316985); +#316984 = CARTESIAN_POINT('',(133.080491,-151.098079,-3.5E-02)); +#316985 = VECTOR('',#316986,1.); +#316986 = DIRECTION('',(-0.923879575272,0.382683329132,0.)); +#316987 = ORIENTED_EDGE('',*,*,#316988,.F.); +#316988 = EDGE_CURVE('',#316989,#316981,#316991,.T.); +#316989 = VERTEX_POINT('',#316990); +#316990 = CARTESIAN_POINT('',(133.076143,-151.096278,0.)); +#316991 = LINE('',#316992,#316993); +#316992 = CARTESIAN_POINT('',(133.076143,-151.096278,0.)); +#316993 = VECTOR('',#316994,1.); +#316994 = DIRECTION('',(0.,0.,-1.)); +#316995 = ORIENTED_EDGE('',*,*,#316996,.F.); +#316996 = EDGE_CURVE('',#316958,#316989,#316997,.T.); +#316997 = LINE('',#316998,#316999); +#316998 = CARTESIAN_POINT('',(133.080491,-151.098079,0.)); +#316999 = VECTOR('',#317000,1.); +#317000 = DIRECTION('',(-0.923879575272,0.382683329132,0.)); +#317001 = PLANE('',#317002); +#317002 = AXIS2_PLACEMENT_3D('',#317003,#317004,#317005); +#317003 = CARTESIAN_POINT('',(133.080491,-151.098079,0.)); +#317004 = DIRECTION('',(0.382683329132,0.923879575272,0.)); +#317005 = DIRECTION('',(-0.923879575272,0.382683329132,0.)); +#317006 = ADVANCED_FACE('',(#317007),#317032,.F.); +#317007 = FACE_BOUND('',#317008,.F.); +#317008 = EDGE_LOOP('',(#317009,#317010,#317018,#317026)); +#317009 = ORIENTED_EDGE('',*,*,#316988,.T.); +#317010 = ORIENTED_EDGE('',*,*,#317011,.T.); +#317011 = EDGE_CURVE('',#316981,#317012,#317014,.T.); +#317012 = VERTEX_POINT('',#317013); +#317013 = CARTESIAN_POINT('',(128.986557,-155.183147,-3.5E-02)); +#317014 = LINE('',#317015,#317016); +#317015 = CARTESIAN_POINT('',(133.076143,-151.096278,-3.5E-02)); +#317016 = VECTOR('',#317017,1.); +#317017 = DIRECTION('',(-0.707341710604,-0.70687177369,0.)); +#317018 = ORIENTED_EDGE('',*,*,#317019,.F.); +#317019 = EDGE_CURVE('',#317020,#317012,#317022,.T.); +#317020 = VERTEX_POINT('',#317021); +#317021 = CARTESIAN_POINT('',(128.986557,-155.183147,0.)); +#317022 = LINE('',#317023,#317024); +#317023 = CARTESIAN_POINT('',(128.986557,-155.183147,0.)); +#317024 = VECTOR('',#317025,1.); +#317025 = DIRECTION('',(0.,0.,-1.)); +#317026 = ORIENTED_EDGE('',*,*,#317027,.F.); +#317027 = EDGE_CURVE('',#316989,#317020,#317028,.T.); +#317028 = LINE('',#317029,#317030); +#317029 = CARTESIAN_POINT('',(133.076143,-151.096278,0.)); +#317030 = VECTOR('',#317031,1.); +#317031 = DIRECTION('',(-0.707341710604,-0.70687177369,0.)); +#317032 = PLANE('',#317033); +#317033 = AXIS2_PLACEMENT_3D('',#317034,#317035,#317036); +#317034 = CARTESIAN_POINT('',(133.076143,-151.096278,0.)); +#317035 = DIRECTION('',(-0.70687177369,0.707341710604,0.)); +#317036 = DIRECTION('',(-0.707341710604,-0.70687177369,0.)); +#317037 = ADVANCED_FACE('',(#317038),#317063,.F.); +#317038 = FACE_BOUND('',#317039,.F.); +#317039 = EDGE_LOOP('',(#317040,#317041,#317049,#317057)); +#317040 = ORIENTED_EDGE('',*,*,#317019,.T.); +#317041 = ORIENTED_EDGE('',*,*,#317042,.T.); +#317042 = EDGE_CURVE('',#317012,#317043,#317045,.T.); +#317043 = VERTEX_POINT('',#317044); +#317044 = CARTESIAN_POINT('',(128.950509,-155.198079,-3.5E-02)); +#317045 = LINE('',#317046,#317047); +#317046 = CARTESIAN_POINT('',(128.986557,-155.183147,-3.5E-02)); +#317047 = VECTOR('',#317048,1.); +#317048 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#317049 = ORIENTED_EDGE('',*,*,#317050,.F.); +#317050 = EDGE_CURVE('',#317051,#317043,#317053,.T.); +#317051 = VERTEX_POINT('',#317052); +#317052 = CARTESIAN_POINT('',(128.950509,-155.198079,0.)); +#317053 = LINE('',#317054,#317055); +#317054 = CARTESIAN_POINT('',(128.950509,-155.198079,0.)); +#317055 = VECTOR('',#317056,1.); +#317056 = DIRECTION('',(0.,0.,-1.)); +#317057 = ORIENTED_EDGE('',*,*,#317058,.F.); +#317058 = EDGE_CURVE('',#317020,#317051,#317059,.T.); +#317059 = LINE('',#317060,#317061); +#317060 = CARTESIAN_POINT('',(128.986557,-155.183147,0.)); +#317061 = VECTOR('',#317062,1.); +#317062 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#317063 = PLANE('',#317064); +#317064 = AXIS2_PLACEMENT_3D('',#317065,#317066,#317067); +#317065 = CARTESIAN_POINT('',(128.986557,-155.183147,0.)); +#317066 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#317067 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#317068 = ADVANCED_FACE('',(#317069),#317094,.F.); +#317069 = FACE_BOUND('',#317070,.F.); +#317070 = EDGE_LOOP('',(#317071,#317072,#317080,#317088)); +#317071 = ORIENTED_EDGE('',*,*,#317050,.T.); +#317072 = ORIENTED_EDGE('',*,*,#317073,.T.); +#317073 = EDGE_CURVE('',#317043,#317074,#317076,.T.); +#317074 = VERTEX_POINT('',#317075); +#317075 = CARTESIAN_POINT('',(126.580491,-155.198079,-3.5E-02)); +#317076 = LINE('',#317077,#317078); +#317077 = CARTESIAN_POINT('',(128.950509,-155.198079,-3.5E-02)); +#317078 = VECTOR('',#317079,1.); +#317079 = DIRECTION('',(-1.,0.,0.)); +#317080 = ORIENTED_EDGE('',*,*,#317081,.F.); +#317081 = EDGE_CURVE('',#317082,#317074,#317084,.T.); +#317082 = VERTEX_POINT('',#317083); +#317083 = CARTESIAN_POINT('',(126.580491,-155.198079,0.)); +#317084 = LINE('',#317085,#317086); +#317085 = CARTESIAN_POINT('',(126.580491,-155.198079,0.)); +#317086 = VECTOR('',#317087,1.); +#317087 = DIRECTION('',(0.,0.,-1.)); +#317088 = ORIENTED_EDGE('',*,*,#317089,.F.); +#317089 = EDGE_CURVE('',#317051,#317082,#317090,.T.); +#317090 = LINE('',#317091,#317092); +#317091 = CARTESIAN_POINT('',(128.950509,-155.198079,0.)); +#317092 = VECTOR('',#317093,1.); +#317093 = DIRECTION('',(-1.,0.,0.)); +#317094 = PLANE('',#317095); +#317095 = AXIS2_PLACEMENT_3D('',#317096,#317097,#317098); +#317096 = CARTESIAN_POINT('',(128.950509,-155.198079,0.)); +#317097 = DIRECTION('',(0.,1.,0.)); +#317098 = DIRECTION('',(-1.,0.,0.)); +#317099 = ADVANCED_FACE('',(#317100),#317125,.F.); +#317100 = FACE_BOUND('',#317101,.F.); +#317101 = EDGE_LOOP('',(#317102,#317103,#317111,#317119)); +#317102 = ORIENTED_EDGE('',*,*,#317081,.T.); +#317103 = ORIENTED_EDGE('',*,*,#317104,.T.); +#317104 = EDGE_CURVE('',#317074,#317105,#317107,.T.); +#317105 = VERTEX_POINT('',#317106); +#317106 = CARTESIAN_POINT('',(126.544442,-155.183147,-3.5E-02)); +#317107 = LINE('',#317108,#317109); +#317108 = CARTESIAN_POINT('',(126.580491,-155.198079,-3.5E-02)); +#317109 = VECTOR('',#317110,1.); +#317110 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#317111 = ORIENTED_EDGE('',*,*,#317112,.F.); +#317112 = EDGE_CURVE('',#317113,#317105,#317115,.T.); +#317113 = VERTEX_POINT('',#317114); +#317114 = CARTESIAN_POINT('',(126.544442,-155.183147,0.)); +#317115 = LINE('',#317116,#317117); +#317116 = CARTESIAN_POINT('',(126.544442,-155.183147,0.)); +#317117 = VECTOR('',#317118,1.); +#317118 = DIRECTION('',(0.,0.,-1.)); +#317119 = ORIENTED_EDGE('',*,*,#317120,.F.); +#317120 = EDGE_CURVE('',#317082,#317113,#317121,.T.); +#317121 = LINE('',#317122,#317123); +#317122 = CARTESIAN_POINT('',(126.580491,-155.198079,0.)); +#317123 = VECTOR('',#317124,1.); +#317124 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#317125 = PLANE('',#317126); +#317126 = AXIS2_PLACEMENT_3D('',#317127,#317128,#317129); +#317127 = CARTESIAN_POINT('',(126.580491,-155.198079,0.)); +#317128 = DIRECTION('',(0.382683766838,0.923879393968,0.)); +#317129 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#317130 = ADVANCED_FACE('',(#317131),#317156,.F.); +#317131 = FACE_BOUND('',#317132,.F.); +#317132 = EDGE_LOOP('',(#317133,#317134,#317142,#317150)); +#317133 = ORIENTED_EDGE('',*,*,#317112,.T.); +#317134 = ORIENTED_EDGE('',*,*,#317135,.T.); +#317135 = EDGE_CURVE('',#317105,#317136,#317138,.T.); +#317136 = VERTEX_POINT('',#317137); +#317137 = CARTESIAN_POINT('',(124.458578,-153.1,-3.5E-02)); +#317138 = LINE('',#317139,#317140); +#317139 = CARTESIAN_POINT('',(126.544442,-155.183147,-3.5E-02)); +#317140 = VECTOR('',#317141,1.); +#317141 = DIRECTION('',(-0.707567461832,0.706645800212,0.)); +#317142 = ORIENTED_EDGE('',*,*,#317143,.F.); +#317143 = EDGE_CURVE('',#317144,#317136,#317146,.T.); +#317144 = VERTEX_POINT('',#317145); +#317145 = CARTESIAN_POINT('',(124.458578,-153.1,0.)); +#317146 = LINE('',#317147,#317148); +#317147 = CARTESIAN_POINT('',(124.458578,-153.1,0.)); +#317148 = VECTOR('',#317149,1.); +#317149 = DIRECTION('',(0.,0.,-1.)); +#317150 = ORIENTED_EDGE('',*,*,#317151,.F.); +#317151 = EDGE_CURVE('',#317113,#317144,#317152,.T.); +#317152 = LINE('',#317153,#317154); +#317153 = CARTESIAN_POINT('',(126.544442,-155.183147,0.)); +#317154 = VECTOR('',#317155,1.); +#317155 = DIRECTION('',(-0.707567461832,0.706645800212,0.)); +#317156 = PLANE('',#317157); +#317157 = AXIS2_PLACEMENT_3D('',#317158,#317159,#317160); +#317158 = CARTESIAN_POINT('',(126.544442,-155.183147,0.)); +#317159 = DIRECTION('',(0.706645800212,0.707567461832,0.)); +#317160 = DIRECTION('',(-0.707567461832,0.706645800212,0.)); +#317161 = ADVANCED_FACE('',(#317162),#317187,.F.); +#317162 = FACE_BOUND('',#317163,.F.); +#317163 = EDGE_LOOP('',(#317164,#317165,#317173,#317181)); +#317164 = ORIENTED_EDGE('',*,*,#317143,.T.); +#317165 = ORIENTED_EDGE('',*,*,#317166,.T.); +#317166 = EDGE_CURVE('',#317136,#317167,#317169,.T.); +#317167 = VERTEX_POINT('',#317168); +#317168 = CARTESIAN_POINT('',(124.414805,-153.098079,-3.5E-02)); +#317169 = LINE('',#317170,#317171); +#317170 = CARTESIAN_POINT('',(124.458578,-153.1,-3.5E-02)); +#317171 = VECTOR('',#317172,1.); +#317172 = DIRECTION('',(-0.99903842017,4.384330078196E-02,0.)); +#317173 = ORIENTED_EDGE('',*,*,#317174,.F.); +#317174 = EDGE_CURVE('',#317175,#317167,#317177,.T.); +#317175 = VERTEX_POINT('',#317176); +#317176 = CARTESIAN_POINT('',(124.414805,-153.098079,0.)); +#317177 = LINE('',#317178,#317179); +#317178 = CARTESIAN_POINT('',(124.414805,-153.098079,0.)); +#317179 = VECTOR('',#317180,1.); +#317180 = DIRECTION('',(0.,0.,-1.)); +#317181 = ORIENTED_EDGE('',*,*,#317182,.F.); +#317182 = EDGE_CURVE('',#317144,#317175,#317183,.T.); +#317183 = LINE('',#317184,#317185); +#317184 = CARTESIAN_POINT('',(124.458578,-153.1,0.)); +#317185 = VECTOR('',#317186,1.); +#317186 = DIRECTION('',(-0.99903842017,4.384330078196E-02,0.)); +#317187 = PLANE('',#317188); +#317188 = AXIS2_PLACEMENT_3D('',#317189,#317190,#317191); +#317189 = CARTESIAN_POINT('',(124.458578,-153.1,0.)); +#317190 = DIRECTION('',(4.384330078196E-02,0.99903842017,0.)); +#317191 = DIRECTION('',(-0.99903842017,4.384330078196E-02,0.)); +#317192 = ADVANCED_FACE('',(#317193),#317218,.F.); +#317193 = FACE_BOUND('',#317194,.F.); +#317194 = EDGE_LOOP('',(#317195,#317196,#317204,#317212)); +#317195 = ORIENTED_EDGE('',*,*,#317174,.T.); +#317196 = ORIENTED_EDGE('',*,*,#317197,.T.); +#317197 = EDGE_CURVE('',#317167,#317198,#317200,.T.); +#317198 = VERTEX_POINT('',#317199); +#317199 = CARTESIAN_POINT('',(124.378757,-153.083147,-3.5E-02)); +#317200 = LINE('',#317201,#317202); +#317201 = CARTESIAN_POINT('',(124.414805,-153.098079,-3.5E-02)); +#317202 = VECTOR('',#317203,1.); +#317203 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#317204 = ORIENTED_EDGE('',*,*,#317205,.F.); +#317205 = EDGE_CURVE('',#317206,#317198,#317208,.T.); +#317206 = VERTEX_POINT('',#317207); +#317207 = CARTESIAN_POINT('',(124.378757,-153.083147,0.)); +#317208 = LINE('',#317209,#317210); +#317209 = CARTESIAN_POINT('',(124.378757,-153.083147,0.)); +#317210 = VECTOR('',#317211,1.); +#317211 = DIRECTION('',(0.,0.,-1.)); +#317212 = ORIENTED_EDGE('',*,*,#317213,.F.); +#317213 = EDGE_CURVE('',#317175,#317206,#317214,.T.); +#317214 = LINE('',#317215,#317216); +#317215 = CARTESIAN_POINT('',(124.414805,-153.098079,0.)); +#317216 = VECTOR('',#317217,1.); +#317217 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#317218 = PLANE('',#317219); +#317219 = AXIS2_PLACEMENT_3D('',#317220,#317221,#317222); +#317220 = CARTESIAN_POINT('',(124.414805,-153.098079,0.)); +#317221 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#317222 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#317223 = ADVANCED_FACE('',(#317224),#317249,.F.); +#317224 = FACE_BOUND('',#317225,.F.); +#317225 = EDGE_LOOP('',(#317226,#317227,#317235,#317243)); +#317226 = ORIENTED_EDGE('',*,*,#317205,.T.); +#317227 = ORIENTED_EDGE('',*,*,#317228,.T.); +#317228 = EDGE_CURVE('',#317198,#317229,#317231,.T.); +#317229 = VERTEX_POINT('',#317230); +#317230 = CARTESIAN_POINT('',(122.501353,-151.205742,-3.5E-02)); +#317231 = LINE('',#317232,#317233); +#317232 = CARTESIAN_POINT('',(124.378757,-153.083147,-3.5E-02)); +#317233 = VECTOR('',#317234,1.); +#317234 = DIRECTION('',(-0.707106592866,0.707106969507,0.)); +#317235 = ORIENTED_EDGE('',*,*,#317236,.F.); +#317236 = EDGE_CURVE('',#317237,#317229,#317239,.T.); +#317237 = VERTEX_POINT('',#317238); +#317238 = CARTESIAN_POINT('',(122.501353,-151.205742,0.)); +#317239 = LINE('',#317240,#317241); +#317240 = CARTESIAN_POINT('',(122.501353,-151.205742,0.)); +#317241 = VECTOR('',#317242,1.); +#317242 = DIRECTION('',(0.,0.,-1.)); +#317243 = ORIENTED_EDGE('',*,*,#317244,.F.); +#317244 = EDGE_CURVE('',#317206,#317237,#317245,.T.); +#317245 = LINE('',#317246,#317247); +#317246 = CARTESIAN_POINT('',(124.378757,-153.083147,0.)); +#317247 = VECTOR('',#317248,1.); +#317248 = DIRECTION('',(-0.707106592866,0.707106969507,0.)); +#317249 = PLANE('',#317250); +#317250 = AXIS2_PLACEMENT_3D('',#317251,#317252,#317253); +#317251 = CARTESIAN_POINT('',(124.378757,-153.083147,0.)); +#317252 = DIRECTION('',(0.707106969507,0.707106592866,0.)); +#317253 = DIRECTION('',(-0.707106592866,0.707106969507,0.)); +#317254 = ADVANCED_FACE('',(#317255),#317280,.F.); +#317255 = FACE_BOUND('',#317256,.F.); +#317256 = EDGE_LOOP('',(#317257,#317258,#317266,#317274)); +#317257 = ORIENTED_EDGE('',*,*,#317236,.T.); +#317258 = ORIENTED_EDGE('',*,*,#317259,.T.); +#317259 = EDGE_CURVE('',#317229,#317260,#317262,.T.); +#317260 = VERTEX_POINT('',#317261); +#317261 = CARTESIAN_POINT('',(122.486421,-151.169694,-3.5E-02)); +#317262 = LINE('',#317263,#317264); +#317263 = CARTESIAN_POINT('',(122.501353,-151.205742,-3.5E-02)); +#317264 = VECTOR('',#317265,1.); +#317265 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#317266 = ORIENTED_EDGE('',*,*,#317267,.F.); +#317267 = EDGE_CURVE('',#317268,#317260,#317270,.T.); +#317268 = VERTEX_POINT('',#317269); +#317269 = CARTESIAN_POINT('',(122.486421,-151.169694,0.)); +#317270 = LINE('',#317271,#317272); +#317271 = CARTESIAN_POINT('',(122.486421,-151.169694,0.)); +#317272 = VECTOR('',#317273,1.); +#317273 = DIRECTION('',(0.,0.,-1.)); +#317274 = ORIENTED_EDGE('',*,*,#317275,.F.); +#317275 = EDGE_CURVE('',#317237,#317268,#317276,.T.); +#317276 = LINE('',#317277,#317278); +#317277 = CARTESIAN_POINT('',(122.501353,-151.205742,0.)); +#317278 = VECTOR('',#317279,1.); +#317279 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#317280 = PLANE('',#317281); +#317281 = AXIS2_PLACEMENT_3D('',#317282,#317283,#317284); +#317282 = CARTESIAN_POINT('',(122.501353,-151.205742,0.)); +#317283 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#317284 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#317285 = ADVANCED_FACE('',(#317286),#317311,.F.); +#317286 = FACE_BOUND('',#317287,.F.); +#317287 = EDGE_LOOP('',(#317288,#317289,#317297,#317305)); +#317288 = ORIENTED_EDGE('',*,*,#317267,.T.); +#317289 = ORIENTED_EDGE('',*,*,#317290,.T.); +#317290 = EDGE_CURVE('',#317260,#317291,#317293,.T.); +#317291 = VERTEX_POINT('',#317292); +#317292 = CARTESIAN_POINT('',(122.486421,-122.477067,-3.5E-02)); +#317293 = LINE('',#317294,#317295); +#317294 = CARTESIAN_POINT('',(122.486421,-151.169694,-3.5E-02)); +#317295 = VECTOR('',#317296,1.); +#317296 = DIRECTION('',(0.,1.,0.)); +#317297 = ORIENTED_EDGE('',*,*,#317298,.F.); +#317298 = EDGE_CURVE('',#317299,#317291,#317301,.T.); +#317299 = VERTEX_POINT('',#317300); +#317300 = CARTESIAN_POINT('',(122.486421,-122.477067,0.)); +#317301 = LINE('',#317302,#317303); +#317302 = CARTESIAN_POINT('',(122.486421,-122.477067,0.)); +#317303 = VECTOR('',#317304,1.); +#317304 = DIRECTION('',(0.,0.,-1.)); +#317305 = ORIENTED_EDGE('',*,*,#317306,.F.); +#317306 = EDGE_CURVE('',#317268,#317299,#317307,.T.); +#317307 = LINE('',#317308,#317309); +#317308 = CARTESIAN_POINT('',(122.486421,-151.169694,0.)); +#317309 = VECTOR('',#317310,1.); +#317310 = DIRECTION('',(0.,1.,0.)); +#317311 = PLANE('',#317312); +#317312 = AXIS2_PLACEMENT_3D('',#317313,#317314,#317315); +#317313 = CARTESIAN_POINT('',(122.486421,-151.169694,0.)); +#317314 = DIRECTION('',(1.,-0.,0.)); +#317315 = DIRECTION('',(0.,1.,0.)); +#317316 = ADVANCED_FACE('',(#317317),#317342,.F.); +#317317 = FACE_BOUND('',#317318,.F.); +#317318 = EDGE_LOOP('',(#317319,#317320,#317328,#317336)); +#317319 = ORIENTED_EDGE('',*,*,#317298,.T.); +#317320 = ORIENTED_EDGE('',*,*,#317321,.T.); +#317321 = EDGE_CURVE('',#317291,#317322,#317324,.T.); +#317322 = VERTEX_POINT('',#317323); +#317323 = CARTESIAN_POINT('',(122.501353,-122.441019,-3.5E-02)); +#317324 = LINE('',#317325,#317326); +#317325 = CARTESIAN_POINT('',(122.486421,-122.477067,-3.5E-02)); +#317326 = VECTOR('',#317327,1.); +#317327 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#317328 = ORIENTED_EDGE('',*,*,#317329,.F.); +#317329 = EDGE_CURVE('',#317330,#317322,#317332,.T.); +#317330 = VERTEX_POINT('',#317331); +#317331 = CARTESIAN_POINT('',(122.501353,-122.441019,0.)); +#317332 = LINE('',#317333,#317334); +#317333 = CARTESIAN_POINT('',(122.501353,-122.441019,0.)); +#317334 = VECTOR('',#317335,1.); +#317335 = DIRECTION('',(0.,0.,-1.)); +#317336 = ORIENTED_EDGE('',*,*,#317337,.F.); +#317337 = EDGE_CURVE('',#317299,#317330,#317338,.T.); +#317338 = LINE('',#317339,#317340); +#317339 = CARTESIAN_POINT('',(122.486421,-122.477067,0.)); +#317340 = VECTOR('',#317341,1.); +#317341 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#317342 = PLANE('',#317343); +#317343 = AXIS2_PLACEMENT_3D('',#317344,#317345,#317346); +#317344 = CARTESIAN_POINT('',(122.486421,-122.477067,0.)); +#317345 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#317346 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#317347 = ADVANCED_FACE('',(#317348),#317373,.F.); +#317348 = FACE_BOUND('',#317349,.F.); +#317349 = EDGE_LOOP('',(#317350,#317351,#317359,#317367)); +#317350 = ORIENTED_EDGE('',*,*,#317329,.T.); +#317351 = ORIENTED_EDGE('',*,*,#317352,.T.); +#317352 = EDGE_CURVE('',#317322,#317353,#317355,.T.); +#317353 = VERTEX_POINT('',#317354); +#317354 = CARTESIAN_POINT('',(126.000519,-118.941853,-3.5E-02)); +#317355 = LINE('',#317356,#317357); +#317356 = CARTESIAN_POINT('',(122.501353,-122.441019,-3.5E-02)); +#317357 = VECTOR('',#317358,1.); +#317358 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#317359 = ORIENTED_EDGE('',*,*,#317360,.F.); +#317360 = EDGE_CURVE('',#317361,#317353,#317363,.T.); +#317361 = VERTEX_POINT('',#317362); +#317362 = CARTESIAN_POINT('',(126.000519,-118.941853,0.)); +#317363 = LINE('',#317364,#317365); +#317364 = CARTESIAN_POINT('',(126.000519,-118.941853,0.)); +#317365 = VECTOR('',#317366,1.); +#317366 = DIRECTION('',(0.,0.,-1.)); +#317367 = ORIENTED_EDGE('',*,*,#317368,.F.); +#317368 = EDGE_CURVE('',#317330,#317361,#317369,.T.); +#317369 = LINE('',#317370,#317371); +#317370 = CARTESIAN_POINT('',(122.501353,-122.441019,0.)); +#317371 = VECTOR('',#317372,1.); +#317372 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#317373 = PLANE('',#317374); +#317374 = AXIS2_PLACEMENT_3D('',#317375,#317376,#317377); +#317375 = CARTESIAN_POINT('',(122.501353,-122.441019,0.)); +#317376 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#317377 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#317378 = ADVANCED_FACE('',(#317379),#317404,.F.); +#317379 = FACE_BOUND('',#317380,.F.); +#317380 = EDGE_LOOP('',(#317381,#317382,#317390,#317398)); +#317381 = ORIENTED_EDGE('',*,*,#317360,.T.); +#317382 = ORIENTED_EDGE('',*,*,#317383,.T.); +#317383 = EDGE_CURVE('',#317353,#317384,#317386,.T.); +#317384 = VERTEX_POINT('',#317385); +#317385 = CARTESIAN_POINT('',(126.036567,-118.926921,-3.5E-02)); +#317386 = LINE('',#317387,#317388); +#317387 = CARTESIAN_POINT('',(126.000519,-118.941853,-3.5E-02)); +#317388 = VECTOR('',#317389,1.); +#317389 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#317390 = ORIENTED_EDGE('',*,*,#317391,.F.); +#317391 = EDGE_CURVE('',#317392,#317384,#317394,.T.); +#317392 = VERTEX_POINT('',#317393); +#317393 = CARTESIAN_POINT('',(126.036567,-118.926921,0.)); +#317394 = LINE('',#317395,#317396); +#317395 = CARTESIAN_POINT('',(126.036567,-118.926921,0.)); +#317396 = VECTOR('',#317397,1.); +#317397 = DIRECTION('',(0.,0.,-1.)); +#317398 = ORIENTED_EDGE('',*,*,#317399,.F.); +#317399 = EDGE_CURVE('',#317361,#317392,#317400,.T.); +#317400 = LINE('',#317401,#317402); +#317401 = CARTESIAN_POINT('',(126.000519,-118.941853,0.)); +#317402 = VECTOR('',#317403,1.); +#317403 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#317404 = PLANE('',#317405); +#317405 = AXIS2_PLACEMENT_3D('',#317406,#317407,#317408); +#317406 = CARTESIAN_POINT('',(126.000519,-118.941853,0.)); +#317407 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#317408 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#317409 = ADVANCED_FACE('',(#317410),#317435,.F.); +#317410 = FACE_BOUND('',#317411,.F.); +#317411 = EDGE_LOOP('',(#317412,#317413,#317421,#317429)); +#317412 = ORIENTED_EDGE('',*,*,#317391,.T.); +#317413 = ORIENTED_EDGE('',*,*,#317414,.T.); +#317414 = EDGE_CURVE('',#317384,#317415,#317417,.T.); +#317415 = VERTEX_POINT('',#317416); +#317416 = CARTESIAN_POINT('',(126.933578,-118.925,-3.5E-02)); +#317417 = LINE('',#317418,#317419); +#317418 = CARTESIAN_POINT('',(126.036567,-118.926921,-3.5E-02)); +#317419 = VECTOR('',#317420,1.); +#317420 = DIRECTION('',(0.999997706875,2.141551881641E-03,0.)); +#317421 = ORIENTED_EDGE('',*,*,#317422,.F.); +#317422 = EDGE_CURVE('',#317423,#317415,#317425,.T.); +#317423 = VERTEX_POINT('',#317424); +#317424 = CARTESIAN_POINT('',(126.933578,-118.925,0.)); +#317425 = LINE('',#317426,#317427); +#317426 = CARTESIAN_POINT('',(126.933578,-118.925,0.)); +#317427 = VECTOR('',#317428,1.); +#317428 = DIRECTION('',(0.,0.,-1.)); +#317429 = ORIENTED_EDGE('',*,*,#317430,.F.); +#317430 = EDGE_CURVE('',#317392,#317423,#317431,.T.); +#317431 = LINE('',#317432,#317433); +#317432 = CARTESIAN_POINT('',(126.036567,-118.926921,0.)); +#317433 = VECTOR('',#317434,1.); +#317434 = DIRECTION('',(0.999997706875,2.141551881641E-03,0.)); +#317435 = PLANE('',#317436); +#317436 = AXIS2_PLACEMENT_3D('',#317437,#317438,#317439); +#317437 = CARTESIAN_POINT('',(126.036567,-118.926921,0.)); +#317438 = DIRECTION('',(2.141551881641E-03,-0.999997706875,0.)); +#317439 = DIRECTION('',(0.999997706875,2.141551881641E-03,0.)); +#317440 = ADVANCED_FACE('',(#317441),#317457,.F.); +#317441 = FACE_BOUND('',#317442,.F.); +#317442 = EDGE_LOOP('',(#317443,#317444,#317450,#317451)); +#317443 = ORIENTED_EDGE('',*,*,#317422,.T.); +#317444 = ORIENTED_EDGE('',*,*,#317445,.T.); +#317445 = EDGE_CURVE('',#317415,#315165,#317446,.T.); +#317446 = LINE('',#317447,#317448); +#317447 = CARTESIAN_POINT('',(126.933578,-118.925,-3.5E-02)); +#317448 = VECTOR('',#317449,1.); +#317449 = DIRECTION('',(0.708058048859,0.706154232052,0.)); +#317450 = ORIENTED_EDGE('',*,*,#315162,.F.); +#317451 = ORIENTED_EDGE('',*,*,#317452,.F.); +#317452 = EDGE_CURVE('',#317423,#315163,#317453,.T.); +#317453 = LINE('',#317454,#317455); +#317454 = CARTESIAN_POINT('',(126.933578,-118.925,0.)); +#317455 = VECTOR('',#317456,1.); +#317456 = DIRECTION('',(0.708058048859,0.706154232052,0.)); +#317457 = PLANE('',#317458); +#317458 = AXIS2_PLACEMENT_3D('',#317459,#317460,#317461); +#317459 = CARTESIAN_POINT('',(126.933578,-118.925,0.)); +#317460 = DIRECTION('',(0.706154232052,-0.708058048859,0.)); +#317461 = DIRECTION('',(0.708058048859,0.706154232052,0.)); +#317462 = ADVANCED_FACE('',(#317463),#317490,.F.); +#317463 = FACE_BOUND('',#317464,.F.); +#317464 = EDGE_LOOP('',(#317465,#317475,#317482,#317483)); +#317465 = ORIENTED_EDGE('',*,*,#317466,.T.); +#317466 = EDGE_CURVE('',#317467,#317469,#317471,.T.); +#317467 = VERTEX_POINT('',#317468); +#317468 = CARTESIAN_POINT('',(135.607353,-154.243783,0.)); +#317469 = VERTEX_POINT('',#317470); +#317470 = CARTESIAN_POINT('',(135.607353,-154.243783,-3.5E-02)); +#317471 = LINE('',#317472,#317473); +#317472 = CARTESIAN_POINT('',(135.607353,-154.243783,0.)); +#317473 = VECTOR('',#317474,1.); +#317474 = DIRECTION('',(0.,0.,-1.)); +#317475 = ORIENTED_EDGE('',*,*,#317476,.T.); +#317476 = EDGE_CURVE('',#317469,#317469,#317477,.T.); +#317477 = CIRCLE('',#317478,0.137255); +#317478 = AXIS2_PLACEMENT_3D('',#317479,#317480,#317481); +#317479 = CARTESIAN_POINT('',(135.470098,-154.243783,-3.5E-02)); +#317480 = DIRECTION('',(0.,0.,1.)); +#317481 = DIRECTION('',(1.,0.,-0.)); +#317482 = ORIENTED_EDGE('',*,*,#317466,.F.); +#317483 = ORIENTED_EDGE('',*,*,#317484,.F.); +#317484 = EDGE_CURVE('',#317467,#317467,#317485,.T.); +#317485 = CIRCLE('',#317486,0.137255); +#317486 = AXIS2_PLACEMENT_3D('',#317487,#317488,#317489); +#317487 = CARTESIAN_POINT('',(135.470098,-154.243783,0.)); +#317488 = DIRECTION('',(0.,0.,1.)); +#317489 = DIRECTION('',(1.,0.,-0.)); +#317490 = CYLINDRICAL_SURFACE('',#317491,0.137255); +#317491 = AXIS2_PLACEMENT_3D('',#317492,#317493,#317494); +#317492 = CARTESIAN_POINT('',(135.470098,-154.243783,0.)); +#317493 = DIRECTION('',(0.,0.,1.)); +#317494 = DIRECTION('',(1.,0.,-0.)); +#317495 = ADVANCED_FACE('',(#317496),#317523,.F.); +#317496 = FACE_BOUND('',#317497,.F.); +#317497 = EDGE_LOOP('',(#317498,#317508,#317515,#317516)); +#317498 = ORIENTED_EDGE('',*,*,#317499,.T.); +#317499 = EDGE_CURVE('',#317500,#317502,#317504,.T.); +#317500 = VERTEX_POINT('',#317501); +#317501 = CARTESIAN_POINT('',(139.694053,-154.232791,0.)); +#317502 = VERTEX_POINT('',#317503); +#317503 = CARTESIAN_POINT('',(139.694053,-154.232791,-3.5E-02)); +#317504 = LINE('',#317505,#317506); +#317505 = CARTESIAN_POINT('',(139.694053,-154.232791,0.)); +#317506 = VECTOR('',#317507,1.); +#317507 = DIRECTION('',(0.,0.,-1.)); +#317508 = ORIENTED_EDGE('',*,*,#317509,.T.); +#317509 = EDGE_CURVE('',#317502,#317502,#317510,.T.); +#317510 = CIRCLE('',#317511,0.137255); +#317511 = AXIS2_PLACEMENT_3D('',#317512,#317513,#317514); +#317512 = CARTESIAN_POINT('',(139.556798,-154.232791,-3.5E-02)); +#317513 = DIRECTION('',(0.,0.,1.)); +#317514 = DIRECTION('',(1.,0.,-0.)); +#317515 = ORIENTED_EDGE('',*,*,#317499,.F.); +#317516 = ORIENTED_EDGE('',*,*,#317517,.F.); +#317517 = EDGE_CURVE('',#317500,#317500,#317518,.T.); +#317518 = CIRCLE('',#317519,0.137255); +#317519 = AXIS2_PLACEMENT_3D('',#317520,#317521,#317522); +#317520 = CARTESIAN_POINT('',(139.556798,-154.232791,0.)); +#317521 = DIRECTION('',(0.,0.,1.)); +#317522 = DIRECTION('',(1.,0.,-0.)); +#317523 = CYLINDRICAL_SURFACE('',#317524,0.137255); +#317524 = AXIS2_PLACEMENT_3D('',#317525,#317526,#317527); +#317525 = CARTESIAN_POINT('',(139.556798,-154.232791,0.)); +#317526 = DIRECTION('',(0.,0.,1.)); +#317527 = DIRECTION('',(1.,0.,-0.)); +#317528 = ADVANCED_FACE('',(#317529,#317605,#317608),#317611,.F.); +#317529 = FACE_BOUND('',#317530,.F.); +#317530 = EDGE_LOOP('',(#317531,#317532,#317533,#317534,#317535,#317536, + #317537,#317538,#317539,#317540,#317541,#317542,#317543,#317544, + #317545,#317546,#317547,#317548,#317549,#317550,#317551,#317552, + #317553,#317554,#317555,#317556,#317557,#317558,#317559,#317560, + #317561,#317562,#317563,#317564,#317565,#317566,#317567,#317568, + #317569,#317570,#317571,#317572,#317573,#317574,#317575,#317576, + #317577,#317578,#317579,#317580,#317581,#317582,#317583,#317584, + #317585,#317586,#317587,#317588,#317589,#317590,#317591,#317592, + #317593,#317594,#317595,#317596,#317597,#317598,#317599,#317600, + #317601,#317602,#317603,#317604)); +#317531 = ORIENTED_EDGE('',*,*,#315188,.T.); +#317532 = ORIENTED_EDGE('',*,*,#315219,.T.); +#317533 = ORIENTED_EDGE('',*,*,#315251,.T.); +#317534 = ORIENTED_EDGE('',*,*,#315283,.T.); +#317535 = ORIENTED_EDGE('',*,*,#315314,.T.); +#317536 = ORIENTED_EDGE('',*,*,#315345,.T.); +#317537 = ORIENTED_EDGE('',*,*,#315377,.T.); +#317538 = ORIENTED_EDGE('',*,*,#315409,.T.); +#317539 = ORIENTED_EDGE('',*,*,#315440,.T.); +#317540 = ORIENTED_EDGE('',*,*,#315471,.T.); +#317541 = ORIENTED_EDGE('',*,*,#315502,.T.); +#317542 = ORIENTED_EDGE('',*,*,#315533,.T.); +#317543 = ORIENTED_EDGE('',*,*,#315564,.T.); +#317544 = ORIENTED_EDGE('',*,*,#315595,.T.); +#317545 = ORIENTED_EDGE('',*,*,#315626,.T.); +#317546 = ORIENTED_EDGE('',*,*,#315657,.T.); +#317547 = ORIENTED_EDGE('',*,*,#315688,.T.); +#317548 = ORIENTED_EDGE('',*,*,#315719,.T.); +#317549 = ORIENTED_EDGE('',*,*,#315750,.T.); +#317550 = ORIENTED_EDGE('',*,*,#315781,.T.); +#317551 = ORIENTED_EDGE('',*,*,#315812,.T.); +#317552 = ORIENTED_EDGE('',*,*,#315843,.T.); +#317553 = ORIENTED_EDGE('',*,*,#315874,.T.); +#317554 = ORIENTED_EDGE('',*,*,#315906,.T.); +#317555 = ORIENTED_EDGE('',*,*,#315938,.T.); +#317556 = ORIENTED_EDGE('',*,*,#315969,.T.); +#317557 = ORIENTED_EDGE('',*,*,#316000,.T.); +#317558 = ORIENTED_EDGE('',*,*,#316031,.T.); +#317559 = ORIENTED_EDGE('',*,*,#316062,.T.); +#317560 = ORIENTED_EDGE('',*,*,#316093,.T.); +#317561 = ORIENTED_EDGE('',*,*,#316124,.T.); +#317562 = ORIENTED_EDGE('',*,*,#316155,.T.); +#317563 = ORIENTED_EDGE('',*,*,#316186,.T.); +#317564 = ORIENTED_EDGE('',*,*,#316217,.T.); +#317565 = ORIENTED_EDGE('',*,*,#316248,.T.); +#317566 = ORIENTED_EDGE('',*,*,#316279,.T.); +#317567 = ORIENTED_EDGE('',*,*,#316311,.T.); +#317568 = ORIENTED_EDGE('',*,*,#316343,.T.); +#317569 = ORIENTED_EDGE('',*,*,#316374,.T.); +#317570 = ORIENTED_EDGE('',*,*,#316405,.T.); +#317571 = ORIENTED_EDGE('',*,*,#316436,.T.); +#317572 = ORIENTED_EDGE('',*,*,#316467,.T.); +#317573 = ORIENTED_EDGE('',*,*,#316498,.T.); +#317574 = ORIENTED_EDGE('',*,*,#316529,.T.); +#317575 = ORIENTED_EDGE('',*,*,#316560,.T.); +#317576 = ORIENTED_EDGE('',*,*,#316591,.T.); +#317577 = ORIENTED_EDGE('',*,*,#316622,.T.); +#317578 = ORIENTED_EDGE('',*,*,#316653,.T.); +#317579 = ORIENTED_EDGE('',*,*,#316685,.T.); +#317580 = ORIENTED_EDGE('',*,*,#316717,.T.); +#317581 = ORIENTED_EDGE('',*,*,#316748,.T.); +#317582 = ORIENTED_EDGE('',*,*,#316779,.T.); +#317583 = ORIENTED_EDGE('',*,*,#316810,.T.); +#317584 = ORIENTED_EDGE('',*,*,#316841,.T.); +#317585 = ORIENTED_EDGE('',*,*,#316872,.T.); +#317586 = ORIENTED_EDGE('',*,*,#316903,.T.); +#317587 = ORIENTED_EDGE('',*,*,#316934,.T.); +#317588 = ORIENTED_EDGE('',*,*,#316965,.T.); +#317589 = ORIENTED_EDGE('',*,*,#316996,.T.); +#317590 = ORIENTED_EDGE('',*,*,#317027,.T.); +#317591 = ORIENTED_EDGE('',*,*,#317058,.T.); +#317592 = ORIENTED_EDGE('',*,*,#317089,.T.); +#317593 = ORIENTED_EDGE('',*,*,#317120,.T.); +#317594 = ORIENTED_EDGE('',*,*,#317151,.T.); +#317595 = ORIENTED_EDGE('',*,*,#317182,.T.); +#317596 = ORIENTED_EDGE('',*,*,#317213,.T.); +#317597 = ORIENTED_EDGE('',*,*,#317244,.T.); +#317598 = ORIENTED_EDGE('',*,*,#317275,.T.); +#317599 = ORIENTED_EDGE('',*,*,#317306,.T.); +#317600 = ORIENTED_EDGE('',*,*,#317337,.T.); +#317601 = ORIENTED_EDGE('',*,*,#317368,.T.); +#317602 = ORIENTED_EDGE('',*,*,#317399,.T.); +#317603 = ORIENTED_EDGE('',*,*,#317430,.T.); +#317604 = ORIENTED_EDGE('',*,*,#317452,.T.); +#317605 = FACE_BOUND('',#317606,.F.); +#317606 = EDGE_LOOP('',(#317607)); +#317607 = ORIENTED_EDGE('',*,*,#317484,.T.); +#317608 = FACE_BOUND('',#317609,.F.); +#317609 = EDGE_LOOP('',(#317610)); +#317610 = ORIENTED_EDGE('',*,*,#317517,.T.); +#317611 = PLANE('',#317612); +#317612 = AXIS2_PLACEMENT_3D('',#317613,#317614,#317615); +#317613 = CARTESIAN_POINT('',(0.,0.,0.)); +#317614 = DIRECTION('',(-0.,-0.,-1.)); +#317615 = DIRECTION('',(-1.,0.,0.)); +#317616 = ADVANCED_FACE('',(#317617,#317693,#317696),#317699,.T.); +#317617 = FACE_BOUND('',#317618,.T.); +#317618 = EDGE_LOOP('',(#317619,#317620,#317621,#317622,#317623,#317624, + #317625,#317626,#317627,#317628,#317629,#317630,#317631,#317632, + #317633,#317634,#317635,#317636,#317637,#317638,#317639,#317640, + #317641,#317642,#317643,#317644,#317645,#317646,#317647,#317648, + #317649,#317650,#317651,#317652,#317653,#317654,#317655,#317656, + #317657,#317658,#317659,#317660,#317661,#317662,#317663,#317664, + #317665,#317666,#317667,#317668,#317669,#317670,#317671,#317672, + #317673,#317674,#317675,#317676,#317677,#317678,#317679,#317680, + #317681,#317682,#317683,#317684,#317685,#317686,#317687,#317688, + #317689,#317690,#317691,#317692)); +#317619 = ORIENTED_EDGE('',*,*,#315172,.T.); +#317620 = ORIENTED_EDGE('',*,*,#315203,.T.); +#317621 = ORIENTED_EDGE('',*,*,#315234,.T.); +#317622 = ORIENTED_EDGE('',*,*,#315267,.T.); +#317623 = ORIENTED_EDGE('',*,*,#315298,.T.); +#317624 = ORIENTED_EDGE('',*,*,#315329,.T.); +#317625 = ORIENTED_EDGE('',*,*,#315360,.T.); +#317626 = ORIENTED_EDGE('',*,*,#315393,.T.); +#317627 = ORIENTED_EDGE('',*,*,#315424,.T.); +#317628 = ORIENTED_EDGE('',*,*,#315455,.T.); +#317629 = ORIENTED_EDGE('',*,*,#315486,.T.); +#317630 = ORIENTED_EDGE('',*,*,#315517,.T.); +#317631 = ORIENTED_EDGE('',*,*,#315548,.T.); +#317632 = ORIENTED_EDGE('',*,*,#315579,.T.); +#317633 = ORIENTED_EDGE('',*,*,#315610,.T.); +#317634 = ORIENTED_EDGE('',*,*,#315641,.T.); +#317635 = ORIENTED_EDGE('',*,*,#315672,.T.); +#317636 = ORIENTED_EDGE('',*,*,#315703,.T.); +#317637 = ORIENTED_EDGE('',*,*,#315734,.T.); +#317638 = ORIENTED_EDGE('',*,*,#315765,.T.); +#317639 = ORIENTED_EDGE('',*,*,#315796,.T.); +#317640 = ORIENTED_EDGE('',*,*,#315827,.T.); +#317641 = ORIENTED_EDGE('',*,*,#315858,.T.); +#317642 = ORIENTED_EDGE('',*,*,#315889,.T.); +#317643 = ORIENTED_EDGE('',*,*,#315922,.T.); +#317644 = ORIENTED_EDGE('',*,*,#315953,.T.); +#317645 = ORIENTED_EDGE('',*,*,#315984,.T.); +#317646 = ORIENTED_EDGE('',*,*,#316015,.T.); +#317647 = ORIENTED_EDGE('',*,*,#316046,.T.); +#317648 = ORIENTED_EDGE('',*,*,#316077,.T.); +#317649 = ORIENTED_EDGE('',*,*,#316108,.T.); +#317650 = ORIENTED_EDGE('',*,*,#316139,.T.); +#317651 = ORIENTED_EDGE('',*,*,#316170,.T.); +#317652 = ORIENTED_EDGE('',*,*,#316201,.T.); +#317653 = ORIENTED_EDGE('',*,*,#316232,.T.); +#317654 = ORIENTED_EDGE('',*,*,#316263,.T.); +#317655 = ORIENTED_EDGE('',*,*,#316294,.T.); +#317656 = ORIENTED_EDGE('',*,*,#316327,.T.); +#317657 = ORIENTED_EDGE('',*,*,#316358,.T.); +#317658 = ORIENTED_EDGE('',*,*,#316389,.T.); +#317659 = ORIENTED_EDGE('',*,*,#316420,.T.); +#317660 = ORIENTED_EDGE('',*,*,#316451,.T.); +#317661 = ORIENTED_EDGE('',*,*,#316482,.T.); +#317662 = ORIENTED_EDGE('',*,*,#316513,.T.); +#317663 = ORIENTED_EDGE('',*,*,#316544,.T.); +#317664 = ORIENTED_EDGE('',*,*,#316575,.T.); +#317665 = ORIENTED_EDGE('',*,*,#316606,.T.); +#317666 = ORIENTED_EDGE('',*,*,#316637,.T.); +#317667 = ORIENTED_EDGE('',*,*,#316668,.T.); +#317668 = ORIENTED_EDGE('',*,*,#316701,.T.); +#317669 = ORIENTED_EDGE('',*,*,#316732,.T.); +#317670 = ORIENTED_EDGE('',*,*,#316763,.T.); +#317671 = ORIENTED_EDGE('',*,*,#316794,.T.); +#317672 = ORIENTED_EDGE('',*,*,#316825,.T.); +#317673 = ORIENTED_EDGE('',*,*,#316856,.T.); +#317674 = ORIENTED_EDGE('',*,*,#316887,.T.); +#317675 = ORIENTED_EDGE('',*,*,#316918,.T.); +#317676 = ORIENTED_EDGE('',*,*,#316949,.T.); +#317677 = ORIENTED_EDGE('',*,*,#316980,.T.); +#317678 = ORIENTED_EDGE('',*,*,#317011,.T.); +#317679 = ORIENTED_EDGE('',*,*,#317042,.T.); +#317680 = ORIENTED_EDGE('',*,*,#317073,.T.); +#317681 = ORIENTED_EDGE('',*,*,#317104,.T.); +#317682 = ORIENTED_EDGE('',*,*,#317135,.T.); +#317683 = ORIENTED_EDGE('',*,*,#317166,.T.); +#317684 = ORIENTED_EDGE('',*,*,#317197,.T.); +#317685 = ORIENTED_EDGE('',*,*,#317228,.T.); +#317686 = ORIENTED_EDGE('',*,*,#317259,.T.); +#317687 = ORIENTED_EDGE('',*,*,#317290,.T.); +#317688 = ORIENTED_EDGE('',*,*,#317321,.T.); +#317689 = ORIENTED_EDGE('',*,*,#317352,.T.); +#317690 = ORIENTED_EDGE('',*,*,#317383,.T.); +#317691 = ORIENTED_EDGE('',*,*,#317414,.T.); +#317692 = ORIENTED_EDGE('',*,*,#317445,.T.); +#317693 = FACE_BOUND('',#317694,.T.); +#317694 = EDGE_LOOP('',(#317695)); +#317695 = ORIENTED_EDGE('',*,*,#317476,.T.); +#317696 = FACE_BOUND('',#317697,.T.); +#317697 = EDGE_LOOP('',(#317698)); +#317698 = ORIENTED_EDGE('',*,*,#317509,.T.); +#317699 = PLANE('',#317700); +#317700 = AXIS2_PLACEMENT_3D('',#317701,#317702,#317703); +#317701 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#317702 = DIRECTION('',(-0.,-0.,-1.)); +#317703 = DIRECTION('',(-1.,0.,0.)); +#317704 = MANIFOLD_SOLID_BREP('',#317705); +#317705 = CLOSED_SHELL('',(#317706,#317746,#317777,#317808,#317841, + #317872,#317903,#317934,#317967,#317989,#318022,#318055,#318078)); +#317706 = ADVANCED_FACE('',(#317707),#317741,.T.); +#317707 = FACE_BOUND('',#317708,.T.); +#317708 = EDGE_LOOP('',(#317709,#317719,#317727,#317735)); +#317709 = ORIENTED_EDGE('',*,*,#317710,.T.); +#317710 = EDGE_CURVE('',#317711,#317713,#317715,.T.); +#317711 = VERTEX_POINT('',#317712); +#317712 = CARTESIAN_POINT('',(149.433148,-129.645914,1.51)); +#317713 = VERTEX_POINT('',#317714); +#317714 = CARTESIAN_POINT('',(149.433148,-129.645914,1.545)); +#317715 = LINE('',#317716,#317717); +#317716 = CARTESIAN_POINT('',(149.433148,-129.645914,1.51)); +#317717 = VECTOR('',#317718,1.); +#317718 = DIRECTION('',(0.,0.,1.)); +#317719 = ORIENTED_EDGE('',*,*,#317720,.T.); +#317720 = EDGE_CURVE('',#317713,#317721,#317723,.T.); +#317721 = VERTEX_POINT('',#317722); +#317722 = CARTESIAN_POINT('',(149.448079,-129.681962,1.545)); +#317723 = LINE('',#317724,#317725); +#317724 = CARTESIAN_POINT('',(149.433148,-129.645914,1.545)); +#317725 = VECTOR('',#317726,1.); +#317726 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#317727 = ORIENTED_EDGE('',*,*,#317728,.F.); +#317728 = EDGE_CURVE('',#317729,#317721,#317731,.T.); +#317729 = VERTEX_POINT('',#317730); +#317730 = CARTESIAN_POINT('',(149.448079,-129.681962,1.51)); +#317731 = LINE('',#317732,#317733); +#317732 = CARTESIAN_POINT('',(149.448079,-129.681962,1.51)); +#317733 = VECTOR('',#317734,1.); +#317734 = DIRECTION('',(0.,0.,1.)); +#317735 = ORIENTED_EDGE('',*,*,#317736,.F.); +#317736 = EDGE_CURVE('',#317711,#317729,#317737,.T.); +#317737 = LINE('',#317738,#317739); +#317738 = CARTESIAN_POINT('',(149.433148,-129.645914,1.51)); +#317739 = VECTOR('',#317740,1.); +#317740 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#317741 = PLANE('',#317742); +#317742 = AXIS2_PLACEMENT_3D('',#317743,#317744,#317745); +#317743 = CARTESIAN_POINT('',(149.433148,-129.645914,1.51)); +#317744 = DIRECTION('',(0.923884701879,0.382670952169,-0.)); +#317745 = DIRECTION('',(0.382670952169,-0.923884701879,0.)); +#317746 = ADVANCED_FACE('',(#317747),#317772,.T.); +#317747 = FACE_BOUND('',#317748,.T.); +#317748 = EDGE_LOOP('',(#317749,#317750,#317758,#317766)); +#317749 = ORIENTED_EDGE('',*,*,#317728,.T.); +#317750 = ORIENTED_EDGE('',*,*,#317751,.T.); +#317751 = EDGE_CURVE('',#317721,#317752,#317754,.T.); +#317752 = VERTEX_POINT('',#317753); +#317753 = CARTESIAN_POINT('',(149.45,-130.478869,1.545)); +#317754 = LINE('',#317755,#317756); +#317755 = CARTESIAN_POINT('',(149.448079,-129.681962,1.545)); +#317756 = VECTOR('',#317757,1.); +#317757 = DIRECTION('',(2.410562862024E-03,-0.999997094589,0.)); +#317758 = ORIENTED_EDGE('',*,*,#317759,.F.); +#317759 = EDGE_CURVE('',#317760,#317752,#317762,.T.); +#317760 = VERTEX_POINT('',#317761); +#317761 = CARTESIAN_POINT('',(149.45,-130.478869,1.51)); +#317762 = LINE('',#317763,#317764); +#317763 = CARTESIAN_POINT('',(149.45,-130.478869,1.51)); +#317764 = VECTOR('',#317765,1.); +#317765 = DIRECTION('',(0.,0.,1.)); +#317766 = ORIENTED_EDGE('',*,*,#317767,.F.); +#317767 = EDGE_CURVE('',#317729,#317760,#317768,.T.); +#317768 = LINE('',#317769,#317770); +#317769 = CARTESIAN_POINT('',(149.448079,-129.681962,1.51)); +#317770 = VECTOR('',#317771,1.); +#317771 = DIRECTION('',(2.410562862024E-03,-0.999997094589,0.)); +#317772 = PLANE('',#317773); +#317773 = AXIS2_PLACEMENT_3D('',#317774,#317775,#317776); +#317774 = CARTESIAN_POINT('',(149.448079,-129.681962,1.51)); +#317775 = DIRECTION('',(0.999997094589,2.410562862024E-03,-0.)); +#317776 = DIRECTION('',(2.410562862024E-03,-0.999997094589,0.)); +#317777 = ADVANCED_FACE('',(#317778),#317803,.T.); +#317778 = FACE_BOUND('',#317779,.T.); +#317779 = EDGE_LOOP('',(#317780,#317781,#317789,#317797)); +#317780 = ORIENTED_EDGE('',*,*,#317759,.T.); +#317781 = ORIENTED_EDGE('',*,*,#317782,.T.); +#317782 = EDGE_CURVE('',#317752,#317783,#317785,.T.); +#317783 = VERTEX_POINT('',#317784); +#317784 = CARTESIAN_POINT('',(149.464805,-130.482836,1.545)); +#317785 = LINE('',#317786,#317787); +#317786 = CARTESIAN_POINT('',(149.45,-130.478869,1.545)); +#317787 = VECTOR('',#317788,1.); +#317788 = DIRECTION('',(0.965925627199,-0.258819788117,0.)); +#317789 = ORIENTED_EDGE('',*,*,#317790,.F.); +#317790 = EDGE_CURVE('',#317791,#317783,#317793,.T.); +#317791 = VERTEX_POINT('',#317792); +#317792 = CARTESIAN_POINT('',(149.464805,-130.482836,1.51)); +#317793 = LINE('',#317794,#317795); +#317794 = CARTESIAN_POINT('',(149.464805,-130.482836,1.51)); +#317795 = VECTOR('',#317796,1.); +#317796 = DIRECTION('',(0.,0.,1.)); +#317797 = ORIENTED_EDGE('',*,*,#317798,.F.); +#317798 = EDGE_CURVE('',#317760,#317791,#317799,.T.); +#317799 = LINE('',#317800,#317801); +#317800 = CARTESIAN_POINT('',(149.45,-130.478869,1.51)); +#317801 = VECTOR('',#317802,1.); +#317802 = DIRECTION('',(0.965925627199,-0.258819788117,0.)); +#317803 = PLANE('',#317804); +#317804 = AXIS2_PLACEMENT_3D('',#317805,#317806,#317807); +#317805 = CARTESIAN_POINT('',(149.45,-130.478869,1.51)); +#317806 = DIRECTION('',(0.258819788117,0.965925627199,-0.)); +#317807 = DIRECTION('',(0.965925627199,-0.258819788117,0.)); +#317808 = ADVANCED_FACE('',(#317809),#317836,.T.); +#317809 = FACE_BOUND('',#317810,.T.); +#317810 = EDGE_LOOP('',(#317811,#317812,#317821,#317829)); +#317811 = ORIENTED_EDGE('',*,*,#317790,.T.); +#317812 = ORIENTED_EDGE('',*,*,#317813,.T.); +#317813 = EDGE_CURVE('',#317783,#317814,#317816,.T.); +#317814 = VERTEX_POINT('',#317815); +#317815 = CARTESIAN_POINT('',(149.235195,-130.482836,1.545)); +#317816 = CIRCLE('',#317817,0.299999850918); +#317817 = AXIS2_PLACEMENT_3D('',#317818,#317819,#317820); +#317818 = CARTESIAN_POINT('',(149.35,-130.7599997106,1.545)); +#317819 = DIRECTION('',(0.,0.,-1.)); +#317820 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#317821 = ORIENTED_EDGE('',*,*,#317822,.F.); +#317822 = EDGE_CURVE('',#317823,#317814,#317825,.T.); +#317823 = VERTEX_POINT('',#317824); +#317824 = CARTESIAN_POINT('',(149.235195,-130.482836,1.51)); +#317825 = LINE('',#317826,#317827); +#317826 = CARTESIAN_POINT('',(149.235195,-130.482836,1.51)); +#317827 = VECTOR('',#317828,1.); +#317828 = DIRECTION('',(0.,0.,1.)); +#317829 = ORIENTED_EDGE('',*,*,#317830,.F.); +#317830 = EDGE_CURVE('',#317791,#317823,#317831,.T.); +#317831 = CIRCLE('',#317832,0.299999850918); +#317832 = AXIS2_PLACEMENT_3D('',#317833,#317834,#317835); +#317833 = CARTESIAN_POINT('',(149.35,-130.7599997106,1.51)); +#317834 = DIRECTION('',(0.,0.,-1.)); +#317835 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#317836 = CYLINDRICAL_SURFACE('',#317837,0.299999850918); +#317837 = AXIS2_PLACEMENT_3D('',#317838,#317839,#317840); +#317838 = CARTESIAN_POINT('',(149.35,-130.7599997106,1.51)); +#317839 = DIRECTION('',(0.,0.,-1.)); +#317840 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#317841 = ADVANCED_FACE('',(#317842),#317867,.T.); +#317842 = FACE_BOUND('',#317843,.T.); +#317843 = EDGE_LOOP('',(#317844,#317845,#317853,#317861)); +#317844 = ORIENTED_EDGE('',*,*,#317822,.T.); +#317845 = ORIENTED_EDGE('',*,*,#317846,.T.); +#317846 = EDGE_CURVE('',#317814,#317847,#317849,.T.); +#317847 = VERTEX_POINT('',#317848); +#317848 = CARTESIAN_POINT('',(149.25,-130.478869,1.545)); +#317849 = LINE('',#317850,#317851); +#317850 = CARTESIAN_POINT('',(149.235195,-130.482836,1.545)); +#317851 = VECTOR('',#317852,1.); +#317852 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#317853 = ORIENTED_EDGE('',*,*,#317854,.F.); +#317854 = EDGE_CURVE('',#317855,#317847,#317857,.T.); +#317855 = VERTEX_POINT('',#317856); +#317856 = CARTESIAN_POINT('',(149.25,-130.478869,1.51)); +#317857 = LINE('',#317858,#317859); +#317858 = CARTESIAN_POINT('',(149.25,-130.478869,1.51)); +#317859 = VECTOR('',#317860,1.); +#317860 = DIRECTION('',(0.,0.,1.)); +#317861 = ORIENTED_EDGE('',*,*,#317862,.F.); +#317862 = EDGE_CURVE('',#317823,#317855,#317863,.T.); +#317863 = LINE('',#317864,#317865); +#317864 = CARTESIAN_POINT('',(149.235195,-130.482836,1.51)); +#317865 = VECTOR('',#317866,1.); +#317866 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#317867 = PLANE('',#317868); +#317868 = AXIS2_PLACEMENT_3D('',#317869,#317870,#317871); +#317869 = CARTESIAN_POINT('',(149.235195,-130.482836,1.51)); +#317870 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#317871 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#317872 = ADVANCED_FACE('',(#317873),#317898,.T.); +#317873 = FACE_BOUND('',#317874,.T.); +#317874 = EDGE_LOOP('',(#317875,#317876,#317884,#317892)); +#317875 = ORIENTED_EDGE('',*,*,#317854,.T.); +#317876 = ORIENTED_EDGE('',*,*,#317877,.T.); +#317877 = EDGE_CURVE('',#317847,#317878,#317880,.T.); +#317878 = VERTEX_POINT('',#317879); +#317879 = CARTESIAN_POINT('',(149.25,-129.742892,1.545)); +#317880 = LINE('',#317881,#317882); +#317881 = CARTESIAN_POINT('',(149.25,-130.478869,1.545)); +#317882 = VECTOR('',#317883,1.); +#317883 = DIRECTION('',(0.,1.,0.)); +#317884 = ORIENTED_EDGE('',*,*,#317885,.F.); +#317885 = EDGE_CURVE('',#317886,#317878,#317888,.T.); +#317886 = VERTEX_POINT('',#317887); +#317887 = CARTESIAN_POINT('',(149.25,-129.742892,1.51)); +#317888 = LINE('',#317889,#317890); +#317889 = CARTESIAN_POINT('',(149.25,-129.742892,1.51)); +#317890 = VECTOR('',#317891,1.); +#317891 = DIRECTION('',(0.,0.,1.)); +#317892 = ORIENTED_EDGE('',*,*,#317893,.F.); +#317893 = EDGE_CURVE('',#317855,#317886,#317894,.T.); +#317894 = LINE('',#317895,#317896); +#317895 = CARTESIAN_POINT('',(149.25,-130.478869,1.51)); +#317896 = VECTOR('',#317897,1.); +#317897 = DIRECTION('',(0.,1.,0.)); +#317898 = PLANE('',#317899); +#317899 = AXIS2_PLACEMENT_3D('',#317900,#317901,#317902); +#317900 = CARTESIAN_POINT('',(149.25,-130.478869,1.51)); +#317901 = DIRECTION('',(-1.,0.,0.)); +#317902 = DIRECTION('',(0.,1.,0.)); +#317903 = ADVANCED_FACE('',(#317904),#317929,.T.); +#317904 = FACE_BOUND('',#317905,.T.); +#317905 = EDGE_LOOP('',(#317906,#317907,#317915,#317923)); +#317906 = ORIENTED_EDGE('',*,*,#317885,.T.); +#317907 = ORIENTED_EDGE('',*,*,#317908,.T.); +#317908 = EDGE_CURVE('',#317878,#317909,#317911,.T.); +#317909 = VERTEX_POINT('',#317910); +#317910 = CARTESIAN_POINT('',(143.838006,-124.332628,1.545)); +#317911 = LINE('',#317912,#317913); +#317912 = CARTESIAN_POINT('',(149.25,-129.742892,1.545)); +#317913 = VECTOR('',#317914,1.); +#317914 = DIRECTION('',(-0.707219807224,0.70699373708,0.)); +#317915 = ORIENTED_EDGE('',*,*,#317916,.F.); +#317916 = EDGE_CURVE('',#317917,#317909,#317919,.T.); +#317917 = VERTEX_POINT('',#317918); +#317918 = CARTESIAN_POINT('',(143.838006,-124.332628,1.51)); +#317919 = LINE('',#317920,#317921); +#317920 = CARTESIAN_POINT('',(143.838006,-124.332628,1.51)); +#317921 = VECTOR('',#317922,1.); +#317922 = DIRECTION('',(0.,0.,1.)); +#317923 = ORIENTED_EDGE('',*,*,#317924,.F.); +#317924 = EDGE_CURVE('',#317886,#317917,#317925,.T.); +#317925 = LINE('',#317926,#317927); +#317926 = CARTESIAN_POINT('',(149.25,-129.742892,1.51)); +#317927 = VECTOR('',#317928,1.); +#317928 = DIRECTION('',(-0.707219807224,0.70699373708,0.)); +#317929 = PLANE('',#317930); +#317930 = AXIS2_PLACEMENT_3D('',#317931,#317932,#317933); +#317931 = CARTESIAN_POINT('',(149.25,-129.742892,1.51)); +#317932 = DIRECTION('',(-0.70699373708,-0.707219807224,0.)); +#317933 = DIRECTION('',(-0.707219807224,0.70699373708,0.)); +#317934 = ADVANCED_FACE('',(#317935),#317962,.T.); +#317935 = FACE_BOUND('',#317936,.T.); +#317936 = EDGE_LOOP('',(#317937,#317938,#317947,#317955)); +#317937 = ORIENTED_EDGE('',*,*,#317916,.T.); +#317938 = ORIENTED_EDGE('',*,*,#317939,.T.); +#317939 = EDGE_CURVE('',#317909,#317940,#317942,.T.); +#317940 = VERTEX_POINT('',#317941); +#317941 = CARTESIAN_POINT('',(143.896203,-124.106252,1.545)); +#317942 = CIRCLE('',#317943,0.299530114564); +#317943 = AXIS2_PLACEMENT_3D('',#317944,#317945,#317946); +#317944 = CARTESIAN_POINT('',(143.6,-124.1507724708,1.545)); +#317945 = DIRECTION('',(0.,0.,-1.)); +#317946 = DIRECTION('',(0.794597899936,-0.60713604523,0.)); +#317947 = ORIENTED_EDGE('',*,*,#317948,.F.); +#317948 = EDGE_CURVE('',#317949,#317940,#317951,.T.); +#317949 = VERTEX_POINT('',#317950); +#317950 = CARTESIAN_POINT('',(143.896203,-124.106252,1.51)); +#317951 = LINE('',#317952,#317953); +#317952 = CARTESIAN_POINT('',(143.896203,-124.106252,1.51)); +#317953 = VECTOR('',#317954,1.); +#317954 = DIRECTION('',(0.,0.,1.)); +#317955 = ORIENTED_EDGE('',*,*,#317956,.F.); +#317956 = EDGE_CURVE('',#317917,#317949,#317957,.T.); +#317957 = CIRCLE('',#317958,0.299530114564); +#317958 = AXIS2_PLACEMENT_3D('',#317959,#317960,#317961); +#317959 = CARTESIAN_POINT('',(143.6,-124.1507724708,1.51)); +#317960 = DIRECTION('',(0.,0.,-1.)); +#317961 = DIRECTION('',(0.794597899936,-0.60713604523,0.)); +#317962 = CYLINDRICAL_SURFACE('',#317963,0.299530114564); +#317963 = AXIS2_PLACEMENT_3D('',#317964,#317965,#317966); +#317964 = CARTESIAN_POINT('',(143.6,-124.1507724708,1.51)); +#317965 = DIRECTION('',(0.,0.,-1.)); +#317966 = DIRECTION('',(0.794597899936,-0.60713604523,0.)); +#317967 = ADVANCED_FACE('',(#317968),#317984,.T.); +#317968 = FACE_BOUND('',#317969,.T.); +#317969 = EDGE_LOOP('',(#317970,#317971,#317977,#317978)); +#317970 = ORIENTED_EDGE('',*,*,#317948,.T.); +#317971 = ORIENTED_EDGE('',*,*,#317972,.T.); +#317972 = EDGE_CURVE('',#317940,#317713,#317973,.T.); +#317973 = LINE('',#317974,#317975); +#317974 = CARTESIAN_POINT('',(143.896203,-124.106252,1.545)); +#317975 = VECTOR('',#317976,1.); +#317976 = DIRECTION('',(0.706933312479,-0.707280207348,0.)); +#317977 = ORIENTED_EDGE('',*,*,#317710,.F.); +#317978 = ORIENTED_EDGE('',*,*,#317979,.F.); +#317979 = EDGE_CURVE('',#317949,#317711,#317980,.T.); +#317980 = LINE('',#317981,#317982); +#317981 = CARTESIAN_POINT('',(143.896203,-124.106252,1.51)); +#317982 = VECTOR('',#317983,1.); +#317983 = DIRECTION('',(0.706933312479,-0.707280207348,0.)); +#317984 = PLANE('',#317985); +#317985 = AXIS2_PLACEMENT_3D('',#317986,#317987,#317988); +#317986 = CARTESIAN_POINT('',(143.896203,-124.106252,1.51)); +#317987 = DIRECTION('',(0.707280207348,0.706933312479,-0.)); +#317988 = DIRECTION('',(0.706933312479,-0.707280207348,0.)); +#317989 = ADVANCED_FACE('',(#317990),#318017,.F.); +#317990 = FACE_BOUND('',#317991,.T.); +#317991 = EDGE_LOOP('',(#317992,#318002,#318009,#318010)); +#317992 = ORIENTED_EDGE('',*,*,#317993,.T.); +#317993 = EDGE_CURVE('',#317994,#317996,#317998,.T.); +#317994 = VERTEX_POINT('',#317995); +#317995 = CARTESIAN_POINT('',(149.487255,-130.76,1.51)); +#317996 = VERTEX_POINT('',#317997); +#317997 = CARTESIAN_POINT('',(149.487255,-130.76,1.545)); +#317998 = LINE('',#317999,#318000); +#317999 = CARTESIAN_POINT('',(149.487255,-130.76,1.51)); +#318000 = VECTOR('',#318001,1.); +#318001 = DIRECTION('',(0.,0.,1.)); +#318002 = ORIENTED_EDGE('',*,*,#318003,.T.); +#318003 = EDGE_CURVE('',#317996,#317996,#318004,.T.); +#318004 = CIRCLE('',#318005,0.137255); +#318005 = AXIS2_PLACEMENT_3D('',#318006,#318007,#318008); +#318006 = CARTESIAN_POINT('',(149.35,-130.76,1.545)); +#318007 = DIRECTION('',(0.,0.,1.)); +#318008 = DIRECTION('',(1.,0.,-0.)); +#318009 = ORIENTED_EDGE('',*,*,#317993,.F.); +#318010 = ORIENTED_EDGE('',*,*,#318011,.F.); +#318011 = EDGE_CURVE('',#317994,#317994,#318012,.T.); +#318012 = CIRCLE('',#318013,0.137255); +#318013 = AXIS2_PLACEMENT_3D('',#318014,#318015,#318016); +#318014 = CARTESIAN_POINT('',(149.35,-130.76,1.51)); +#318015 = DIRECTION('',(0.,0.,1.)); +#318016 = DIRECTION('',(1.,0.,-0.)); +#318017 = CYLINDRICAL_SURFACE('',#318018,0.137255); +#318018 = AXIS2_PLACEMENT_3D('',#318019,#318020,#318021); +#318019 = CARTESIAN_POINT('',(149.35,-130.76,1.51)); +#318020 = DIRECTION('',(-0.,-0.,-1.)); +#318021 = DIRECTION('',(1.,0.,-0.)); +#318022 = ADVANCED_FACE('',(#318023),#318050,.F.); +#318023 = FACE_BOUND('',#318024,.T.); +#318024 = EDGE_LOOP('',(#318025,#318035,#318042,#318043)); +#318025 = ORIENTED_EDGE('',*,*,#318026,.T.); +#318026 = EDGE_CURVE('',#318027,#318029,#318031,.T.); +#318027 = VERTEX_POINT('',#318028); +#318028 = CARTESIAN_POINT('',(143.737255,-124.15,1.51)); +#318029 = VERTEX_POINT('',#318030); +#318030 = CARTESIAN_POINT('',(143.737255,-124.15,1.545)); +#318031 = LINE('',#318032,#318033); +#318032 = CARTESIAN_POINT('',(143.737255,-124.15,1.51)); +#318033 = VECTOR('',#318034,1.); +#318034 = DIRECTION('',(0.,0.,1.)); +#318035 = ORIENTED_EDGE('',*,*,#318036,.T.); +#318036 = EDGE_CURVE('',#318029,#318029,#318037,.T.); +#318037 = CIRCLE('',#318038,0.137255); +#318038 = AXIS2_PLACEMENT_3D('',#318039,#318040,#318041); +#318039 = CARTESIAN_POINT('',(143.6,-124.15,1.545)); +#318040 = DIRECTION('',(0.,0.,1.)); +#318041 = DIRECTION('',(1.,0.,-0.)); +#318042 = ORIENTED_EDGE('',*,*,#318026,.F.); +#318043 = ORIENTED_EDGE('',*,*,#318044,.F.); +#318044 = EDGE_CURVE('',#318027,#318027,#318045,.T.); +#318045 = CIRCLE('',#318046,0.137255); +#318046 = AXIS2_PLACEMENT_3D('',#318047,#318048,#318049); +#318047 = CARTESIAN_POINT('',(143.6,-124.15,1.51)); +#318048 = DIRECTION('',(0.,0.,1.)); +#318049 = DIRECTION('',(1.,0.,-0.)); +#318050 = CYLINDRICAL_SURFACE('',#318051,0.137255); +#318051 = AXIS2_PLACEMENT_3D('',#318052,#318053,#318054); +#318052 = CARTESIAN_POINT('',(143.6,-124.15,1.51)); +#318053 = DIRECTION('',(-0.,-0.,-1.)); +#318054 = DIRECTION('',(1.,0.,-0.)); +#318055 = ADVANCED_FACE('',(#318056,#318067,#318070),#318073,.F.); +#318056 = FACE_BOUND('',#318057,.T.); +#318057 = EDGE_LOOP('',(#318058,#318059,#318060,#318061,#318062,#318063, + #318064,#318065,#318066)); +#318058 = ORIENTED_EDGE('',*,*,#317736,.T.); +#318059 = ORIENTED_EDGE('',*,*,#317767,.T.); +#318060 = ORIENTED_EDGE('',*,*,#317798,.T.); +#318061 = ORIENTED_EDGE('',*,*,#317830,.T.); +#318062 = ORIENTED_EDGE('',*,*,#317862,.T.); +#318063 = ORIENTED_EDGE('',*,*,#317893,.T.); +#318064 = ORIENTED_EDGE('',*,*,#317924,.T.); +#318065 = ORIENTED_EDGE('',*,*,#317956,.T.); +#318066 = ORIENTED_EDGE('',*,*,#317979,.T.); +#318067 = FACE_BOUND('',#318068,.T.); +#318068 = EDGE_LOOP('',(#318069)); +#318069 = ORIENTED_EDGE('',*,*,#318011,.T.); +#318070 = FACE_BOUND('',#318071,.T.); +#318071 = EDGE_LOOP('',(#318072)); +#318072 = ORIENTED_EDGE('',*,*,#318044,.T.); +#318073 = PLANE('',#318074); +#318074 = AXIS2_PLACEMENT_3D('',#318075,#318076,#318077); +#318075 = CARTESIAN_POINT('',(0.,0.,1.51)); +#318076 = DIRECTION('',(0.,0.,1.)); +#318077 = DIRECTION('',(1.,0.,-0.)); +#318078 = ADVANCED_FACE('',(#318079,#318090,#318093),#318096,.T.); +#318079 = FACE_BOUND('',#318080,.F.); +#318080 = EDGE_LOOP('',(#318081,#318082,#318083,#318084,#318085,#318086, + #318087,#318088,#318089)); +#318081 = ORIENTED_EDGE('',*,*,#317720,.T.); +#318082 = ORIENTED_EDGE('',*,*,#317751,.T.); +#318083 = ORIENTED_EDGE('',*,*,#317782,.T.); +#318084 = ORIENTED_EDGE('',*,*,#317813,.T.); +#318085 = ORIENTED_EDGE('',*,*,#317846,.T.); +#318086 = ORIENTED_EDGE('',*,*,#317877,.T.); +#318087 = ORIENTED_EDGE('',*,*,#317908,.T.); +#318088 = ORIENTED_EDGE('',*,*,#317939,.T.); +#318089 = ORIENTED_EDGE('',*,*,#317972,.T.); +#318090 = FACE_BOUND('',#318091,.F.); +#318091 = EDGE_LOOP('',(#318092)); +#318092 = ORIENTED_EDGE('',*,*,#318003,.T.); +#318093 = FACE_BOUND('',#318094,.F.); +#318094 = EDGE_LOOP('',(#318095)); +#318095 = ORIENTED_EDGE('',*,*,#318036,.T.); +#318096 = PLANE('',#318097); +#318097 = AXIS2_PLACEMENT_3D('',#318098,#318099,#318100); +#318098 = CARTESIAN_POINT('',(0.,0.,1.545)); +#318099 = DIRECTION('',(0.,0.,1.)); +#318100 = DIRECTION('',(1.,0.,-0.)); +#318101 = MANIFOLD_SOLID_BREP('',#318102); +#318102 = CLOSED_SHELL('',(#318103,#318143,#318174,#318205,#318236, + #318269,#318300,#318331,#318362,#318393,#318426,#318448,#318481, + #318514,#318539)); +#318103 = ADVANCED_FACE('',(#318104),#318138,.T.); +#318104 = FACE_BOUND('',#318105,.T.); +#318105 = EDGE_LOOP('',(#318106,#318116,#318124,#318132)); +#318106 = ORIENTED_EDGE('',*,*,#318107,.T.); +#318107 = EDGE_CURVE('',#318108,#318110,#318112,.T.); +#318108 = VERTEX_POINT('',#318109); +#318109 = CARTESIAN_POINT('',(139.271567,-119.,1.51)); +#318110 = VERTEX_POINT('',#318111); +#318111 = CARTESIAN_POINT('',(139.271567,-119.,1.545)); +#318112 = LINE('',#318113,#318114); +#318113 = CARTESIAN_POINT('',(139.271567,-119.,1.51)); +#318114 = VECTOR('',#318115,1.); +#318115 = DIRECTION('',(0.,0.,1.)); +#318116 = ORIENTED_EDGE('',*,*,#318117,.T.); +#318117 = EDGE_CURVE('',#318110,#318118,#318120,.T.); +#318118 = VERTEX_POINT('',#318119); +#318119 = CARTESIAN_POINT('',(141.819509,-119.001921,1.545)); +#318120 = LINE('',#318121,#318122); +#318121 = CARTESIAN_POINT('',(139.271567,-119.,1.545)); +#318122 = VECTOR('',#318123,1.); +#318123 = DIRECTION('',(0.999999715786,-7.5394159444E-04,0.)); +#318124 = ORIENTED_EDGE('',*,*,#318125,.F.); +#318125 = EDGE_CURVE('',#318126,#318118,#318128,.T.); +#318126 = VERTEX_POINT('',#318127); +#318127 = CARTESIAN_POINT('',(141.819509,-119.001921,1.51)); +#318128 = LINE('',#318129,#318130); +#318129 = CARTESIAN_POINT('',(141.819509,-119.001921,1.51)); +#318130 = VECTOR('',#318131,1.); +#318131 = DIRECTION('',(0.,0.,1.)); +#318132 = ORIENTED_EDGE('',*,*,#318133,.F.); +#318133 = EDGE_CURVE('',#318108,#318126,#318134,.T.); +#318134 = LINE('',#318135,#318136); +#318135 = CARTESIAN_POINT('',(139.271567,-119.,1.51)); +#318136 = VECTOR('',#318137,1.); +#318137 = DIRECTION('',(0.999999715786,-7.5394159444E-04,0.)); +#318138 = PLANE('',#318139); +#318139 = AXIS2_PLACEMENT_3D('',#318140,#318141,#318142); +#318140 = CARTESIAN_POINT('',(139.271567,-119.,1.51)); +#318141 = DIRECTION('',(7.5394159444E-04,0.999999715786,-0.)); +#318142 = DIRECTION('',(0.999999715786,-7.5394159444E-04,0.)); +#318143 = ADVANCED_FACE('',(#318144),#318169,.T.); +#318144 = FACE_BOUND('',#318145,.T.); +#318145 = EDGE_LOOP('',(#318146,#318147,#318155,#318163)); +#318146 = ORIENTED_EDGE('',*,*,#318125,.T.); +#318147 = ORIENTED_EDGE('',*,*,#318148,.T.); +#318148 = EDGE_CURVE('',#318118,#318149,#318151,.T.); +#318149 = VERTEX_POINT('',#318150); +#318150 = CARTESIAN_POINT('',(141.855557,-119.016853,1.545)); +#318151 = LINE('',#318152,#318153); +#318152 = CARTESIAN_POINT('',(141.819509,-119.001921,1.545)); +#318153 = VECTOR('',#318154,1.); +#318154 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#318155 = ORIENTED_EDGE('',*,*,#318156,.F.); +#318156 = EDGE_CURVE('',#318157,#318149,#318159,.T.); +#318157 = VERTEX_POINT('',#318158); +#318158 = CARTESIAN_POINT('',(141.855557,-119.016853,1.51)); +#318159 = LINE('',#318160,#318161); +#318160 = CARTESIAN_POINT('',(141.855557,-119.016853,1.51)); +#318161 = VECTOR('',#318162,1.); +#318162 = DIRECTION('',(0.,0.,1.)); +#318163 = ORIENTED_EDGE('',*,*,#318164,.F.); +#318164 = EDGE_CURVE('',#318126,#318157,#318165,.T.); +#318165 = LINE('',#318166,#318167); +#318166 = CARTESIAN_POINT('',(141.819509,-119.001921,1.51)); +#318167 = VECTOR('',#318168,1.); +#318168 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#318169 = PLANE('',#318170); +#318170 = AXIS2_PLACEMENT_3D('',#318171,#318172,#318173); +#318171 = CARTESIAN_POINT('',(141.819509,-119.001921,1.51)); +#318172 = DIRECTION('',(0.38269282806,0.923875640631,-0.)); +#318173 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#318174 = ADVANCED_FACE('',(#318175),#318200,.T.); +#318175 = FACE_BOUND('',#318176,.T.); +#318176 = EDGE_LOOP('',(#318177,#318178,#318186,#318194)); +#318177 = ORIENTED_EDGE('',*,*,#318156,.T.); +#318178 = ORIENTED_EDGE('',*,*,#318179,.T.); +#318179 = EDGE_CURVE('',#318149,#318180,#318182,.T.); +#318180 = VERTEX_POINT('',#318181); +#318181 = CARTESIAN_POINT('',(142.071921,-119.230499,1.545)); +#318182 = LINE('',#318183,#318184); +#318183 = CARTESIAN_POINT('',(141.855557,-119.016853,1.545)); +#318184 = VECTOR('',#318185,1.); +#318185 = DIRECTION('',(0.711562035748,-0.702623276929,0.)); +#318186 = ORIENTED_EDGE('',*,*,#318187,.F.); +#318187 = EDGE_CURVE('',#318188,#318180,#318190,.T.); +#318188 = VERTEX_POINT('',#318189); +#318189 = CARTESIAN_POINT('',(142.071921,-119.230499,1.51)); +#318190 = LINE('',#318191,#318192); +#318191 = CARTESIAN_POINT('',(142.071921,-119.230499,1.51)); +#318192 = VECTOR('',#318193,1.); +#318193 = DIRECTION('',(0.,0.,1.)); +#318194 = ORIENTED_EDGE('',*,*,#318195,.F.); +#318195 = EDGE_CURVE('',#318157,#318188,#318196,.T.); +#318196 = LINE('',#318197,#318198); +#318197 = CARTESIAN_POINT('',(141.855557,-119.016853,1.51)); +#318198 = VECTOR('',#318199,1.); +#318199 = DIRECTION('',(0.711562035748,-0.702623276929,0.)); +#318200 = PLANE('',#318201); +#318201 = AXIS2_PLACEMENT_3D('',#318202,#318203,#318204); +#318202 = CARTESIAN_POINT('',(141.855557,-119.016853,1.51)); +#318203 = DIRECTION('',(0.702623276929,0.711562035748,-0.)); +#318204 = DIRECTION('',(0.711562035748,-0.702623276929,0.)); +#318205 = ADVANCED_FACE('',(#318206),#318231,.T.); +#318206 = FACE_BOUND('',#318207,.T.); +#318207 = EDGE_LOOP('',(#318208,#318209,#318217,#318225)); +#318208 = ORIENTED_EDGE('',*,*,#318187,.T.); +#318209 = ORIENTED_EDGE('',*,*,#318210,.T.); +#318210 = EDGE_CURVE('',#318180,#318211,#318213,.T.); +#318211 = VERTEX_POINT('',#318212); +#318212 = CARTESIAN_POINT('',(142.085195,-119.222836,1.545)); +#318213 = LINE('',#318214,#318215); +#318214 = CARTESIAN_POINT('',(142.071921,-119.230499,1.545)); +#318215 = VECTOR('',#318216,1.); +#318216 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#318217 = ORIENTED_EDGE('',*,*,#318218,.F.); +#318218 = EDGE_CURVE('',#318219,#318211,#318221,.T.); +#318219 = VERTEX_POINT('',#318220); +#318220 = CARTESIAN_POINT('',(142.085195,-119.222836,1.51)); +#318221 = LINE('',#318222,#318223); +#318222 = CARTESIAN_POINT('',(142.085195,-119.222836,1.51)); +#318223 = VECTOR('',#318224,1.); +#318224 = DIRECTION('',(0.,0.,1.)); +#318225 = ORIENTED_EDGE('',*,*,#318226,.F.); +#318226 = EDGE_CURVE('',#318188,#318219,#318227,.T.); +#318227 = LINE('',#318228,#318229); +#318228 = CARTESIAN_POINT('',(142.071921,-119.230499,1.51)); +#318229 = VECTOR('',#318230,1.); +#318230 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#318231 = PLANE('',#318232); +#318232 = AXIS2_PLACEMENT_3D('',#318233,#318234,#318235); +#318233 = CARTESIAN_POINT('',(142.071921,-119.230499,1.51)); +#318234 = DIRECTION('',(-0.499963423545,0.866046520181,0.)); +#318235 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#318236 = ADVANCED_FACE('',(#318237),#318264,.T.); +#318237 = FACE_BOUND('',#318238,.T.); +#318238 = EDGE_LOOP('',(#318239,#318240,#318249,#318257)); +#318239 = ORIENTED_EDGE('',*,*,#318218,.T.); +#318240 = ORIENTED_EDGE('',*,*,#318241,.T.); +#318241 = EDGE_CURVE('',#318211,#318242,#318244,.T.); +#318242 = VERTEX_POINT('',#318243); +#318243 = CARTESIAN_POINT('',(141.922836,-119.385195,1.545)); +#318244 = CIRCLE('',#318245,0.299999934501); +#318245 = AXIS2_PLACEMENT_3D('',#318246,#318247,#318248); +#318246 = CARTESIAN_POINT('',(142.1999998594,-119.4999998594,1.545)); +#318247 = DIRECTION('',(-0.,0.,-1.)); +#318248 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#318249 = ORIENTED_EDGE('',*,*,#318250,.F.); +#318250 = EDGE_CURVE('',#318251,#318242,#318253,.T.); +#318251 = VERTEX_POINT('',#318252); +#318252 = CARTESIAN_POINT('',(141.922836,-119.385195,1.51)); +#318253 = LINE('',#318254,#318255); +#318254 = CARTESIAN_POINT('',(141.922836,-119.385195,1.51)); +#318255 = VECTOR('',#318256,1.); +#318256 = DIRECTION('',(0.,0.,1.)); +#318257 = ORIENTED_EDGE('',*,*,#318258,.F.); +#318258 = EDGE_CURVE('',#318219,#318251,#318259,.T.); +#318259 = CIRCLE('',#318260,0.299999934501); +#318260 = AXIS2_PLACEMENT_3D('',#318261,#318262,#318263); +#318261 = CARTESIAN_POINT('',(142.1999998594,-119.4999998594,1.51)); +#318262 = DIRECTION('',(-0.,0.,-1.)); +#318263 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#318264 = CYLINDRICAL_SURFACE('',#318265,0.299999934501); +#318265 = AXIS2_PLACEMENT_3D('',#318266,#318267,#318268); +#318266 = CARTESIAN_POINT('',(142.1999998594,-119.4999998594,1.51)); +#318267 = DIRECTION('',(-0.,0.,-1.)); +#318268 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#318269 = ADVANCED_FACE('',(#318270),#318295,.T.); +#318270 = FACE_BOUND('',#318271,.T.); +#318271 = EDGE_LOOP('',(#318272,#318273,#318281,#318289)); +#318272 = ORIENTED_EDGE('',*,*,#318250,.T.); +#318273 = ORIENTED_EDGE('',*,*,#318274,.T.); +#318274 = EDGE_CURVE('',#318242,#318275,#318277,.T.); +#318275 = VERTEX_POINT('',#318276); +#318276 = CARTESIAN_POINT('',(141.930499,-119.371921,1.545)); +#318277 = LINE('',#318278,#318279); +#318278 = CARTESIAN_POINT('',(141.922836,-119.385195,1.545)); +#318279 = VECTOR('',#318280,1.); +#318280 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#318281 = ORIENTED_EDGE('',*,*,#318282,.F.); +#318282 = EDGE_CURVE('',#318283,#318275,#318285,.T.); +#318283 = VERTEX_POINT('',#318284); +#318284 = CARTESIAN_POINT('',(141.930499,-119.371921,1.51)); +#318285 = LINE('',#318286,#318287); +#318286 = CARTESIAN_POINT('',(141.930499,-119.371921,1.51)); +#318287 = VECTOR('',#318288,1.); +#318288 = DIRECTION('',(0.,0.,1.)); +#318289 = ORIENTED_EDGE('',*,*,#318290,.F.); +#318290 = EDGE_CURVE('',#318251,#318283,#318291,.T.); +#318291 = LINE('',#318292,#318293); +#318292 = CARTESIAN_POINT('',(141.922836,-119.385195,1.51)); +#318293 = VECTOR('',#318294,1.); +#318294 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#318295 = PLANE('',#318296); +#318296 = AXIS2_PLACEMENT_3D('',#318297,#318298,#318299); +#318297 = CARTESIAN_POINT('',(141.922836,-119.385195,1.51)); +#318298 = DIRECTION('',(-0.86604652018,0.499963423546,0.)); +#318299 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#318300 = ADVANCED_FACE('',(#318301),#318326,.T.); +#318301 = FACE_BOUND('',#318302,.T.); +#318302 = EDGE_LOOP('',(#318303,#318304,#318312,#318320)); +#318303 = ORIENTED_EDGE('',*,*,#318282,.T.); +#318304 = ORIENTED_EDGE('',*,*,#318305,.T.); +#318305 = EDGE_CURVE('',#318275,#318306,#318308,.T.); +#318306 = VERTEX_POINT('',#318307); +#318307 = CARTESIAN_POINT('',(141.758578,-119.2,1.545)); +#318308 = LINE('',#318309,#318310); +#318309 = CARTESIAN_POINT('',(141.930499,-119.371921,1.545)); +#318310 = VECTOR('',#318311,1.); +#318311 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#318312 = ORIENTED_EDGE('',*,*,#318313,.F.); +#318313 = EDGE_CURVE('',#318314,#318306,#318316,.T.); +#318314 = VERTEX_POINT('',#318315); +#318315 = CARTESIAN_POINT('',(141.758578,-119.2,1.51)); +#318316 = LINE('',#318317,#318318); +#318317 = CARTESIAN_POINT('',(141.758578,-119.2,1.51)); +#318318 = VECTOR('',#318319,1.); +#318319 = DIRECTION('',(0.,0.,1.)); +#318320 = ORIENTED_EDGE('',*,*,#318321,.F.); +#318321 = EDGE_CURVE('',#318283,#318314,#318322,.T.); +#318322 = LINE('',#318323,#318324); +#318323 = CARTESIAN_POINT('',(141.930499,-119.371921,1.51)); +#318324 = VECTOR('',#318325,1.); +#318325 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#318326 = PLANE('',#318327); +#318327 = AXIS2_PLACEMENT_3D('',#318328,#318329,#318330); +#318328 = CARTESIAN_POINT('',(141.930499,-119.371921,1.51)); +#318329 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#318330 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#318331 = ADVANCED_FACE('',(#318332),#318357,.T.); +#318332 = FACE_BOUND('',#318333,.T.); +#318333 = EDGE_LOOP('',(#318334,#318335,#318343,#318351)); +#318334 = ORIENTED_EDGE('',*,*,#318313,.T.); +#318335 = ORIENTED_EDGE('',*,*,#318336,.T.); +#318336 = EDGE_CURVE('',#318306,#318337,#318339,.T.); +#318337 = VERTEX_POINT('',#318338); +#318338 = CARTESIAN_POINT('',(139.287695,-119.2,1.545)); +#318339 = LINE('',#318340,#318341); +#318340 = CARTESIAN_POINT('',(141.758578,-119.2,1.545)); +#318341 = VECTOR('',#318342,1.); +#318342 = DIRECTION('',(-1.,0.,0.)); +#318343 = ORIENTED_EDGE('',*,*,#318344,.F.); +#318344 = EDGE_CURVE('',#318345,#318337,#318347,.T.); +#318345 = VERTEX_POINT('',#318346); +#318346 = CARTESIAN_POINT('',(139.287695,-119.2,1.51)); +#318347 = LINE('',#318348,#318349); +#318348 = CARTESIAN_POINT('',(139.287695,-119.2,1.51)); +#318349 = VECTOR('',#318350,1.); +#318350 = DIRECTION('',(0.,0.,1.)); +#318351 = ORIENTED_EDGE('',*,*,#318352,.F.); +#318352 = EDGE_CURVE('',#318314,#318345,#318353,.T.); +#318353 = LINE('',#318354,#318355); +#318354 = CARTESIAN_POINT('',(141.758578,-119.2,1.51)); +#318355 = VECTOR('',#318356,1.); +#318356 = DIRECTION('',(-1.,0.,0.)); +#318357 = PLANE('',#318358); +#318358 = AXIS2_PLACEMENT_3D('',#318359,#318360,#318361); +#318359 = CARTESIAN_POINT('',(141.758578,-119.2,1.51)); +#318360 = DIRECTION('',(0.,-1.,0.)); +#318361 = DIRECTION('',(-1.,0.,0.)); +#318362 = ADVANCED_FACE('',(#318363),#318388,.T.); +#318363 = FACE_BOUND('',#318364,.T.); +#318364 = EDGE_LOOP('',(#318365,#318366,#318374,#318382)); +#318365 = ORIENTED_EDGE('',*,*,#318344,.T.); +#318366 = ORIENTED_EDGE('',*,*,#318367,.T.); +#318367 = EDGE_CURVE('',#318337,#318368,#318370,.T.); +#318368 = VERTEX_POINT('',#318369); +#318369 = CARTESIAN_POINT('',(139.277164,-119.239304,1.545)); +#318370 = LINE('',#318371,#318372); +#318371 = CARTESIAN_POINT('',(139.287695,-119.2,1.545)); +#318372 = VECTOR('',#318373,1.); +#318373 = DIRECTION('',(-0.258808152181,-0.965928744973,0.)); +#318374 = ORIENTED_EDGE('',*,*,#318375,.F.); +#318375 = EDGE_CURVE('',#318376,#318368,#318378,.T.); +#318376 = VERTEX_POINT('',#318377); +#318377 = CARTESIAN_POINT('',(139.277164,-119.239304,1.51)); +#318378 = LINE('',#318379,#318380); +#318379 = CARTESIAN_POINT('',(139.277164,-119.239304,1.51)); +#318380 = VECTOR('',#318381,1.); +#318381 = DIRECTION('',(0.,0.,1.)); +#318382 = ORIENTED_EDGE('',*,*,#318383,.F.); +#318383 = EDGE_CURVE('',#318345,#318376,#318384,.T.); +#318384 = LINE('',#318385,#318386); +#318385 = CARTESIAN_POINT('',(139.287695,-119.2,1.51)); +#318386 = VECTOR('',#318387,1.); +#318387 = DIRECTION('',(-0.258808152181,-0.965928744973,0.)); +#318388 = PLANE('',#318389); +#318389 = AXIS2_PLACEMENT_3D('',#318390,#318391,#318392); +#318390 = CARTESIAN_POINT('',(139.287695,-119.2,1.51)); +#318391 = DIRECTION('',(0.965928744973,-0.258808152181,0.)); +#318392 = DIRECTION('',(-0.258808152181,-0.965928744973,0.)); +#318393 = ADVANCED_FACE('',(#318394),#318421,.T.); +#318394 = FACE_BOUND('',#318395,.T.); +#318395 = EDGE_LOOP('',(#318396,#318397,#318406,#318414)); +#318396 = ORIENTED_EDGE('',*,*,#318375,.T.); +#318397 = ORIENTED_EDGE('',*,*,#318398,.T.); +#318398 = EDGE_CURVE('',#318368,#318399,#318401,.T.); +#318399 = VERTEX_POINT('',#318400); +#318400 = CARTESIAN_POINT('',(139.238006,-118.941871,1.545)); +#318401 = CIRCLE('',#318402,0.29999967471); +#318402 = AXIS2_PLACEMENT_3D('',#318403,#318404,#318405); +#318403 = CARTESIAN_POINT('',(139.00000033943,-119.1244993394,1.545)); +#318404 = DIRECTION('',(-0.,0.,-1.)); +#318405 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#318406 = ORIENTED_EDGE('',*,*,#318407,.F.); +#318407 = EDGE_CURVE('',#318408,#318399,#318410,.T.); +#318408 = VERTEX_POINT('',#318409); +#318409 = CARTESIAN_POINT('',(139.238006,-118.941871,1.51)); +#318410 = LINE('',#318411,#318412); +#318411 = CARTESIAN_POINT('',(139.238006,-118.941871,1.51)); +#318412 = VECTOR('',#318413,1.); +#318413 = DIRECTION('',(0.,0.,1.)); +#318414 = ORIENTED_EDGE('',*,*,#318415,.F.); +#318415 = EDGE_CURVE('',#318376,#318408,#318416,.T.); +#318416 = CIRCLE('',#318417,0.29999967471); +#318417 = AXIS2_PLACEMENT_3D('',#318418,#318419,#318420); +#318418 = CARTESIAN_POINT('',(139.00000033943,-119.1244993394,1.51)); +#318419 = DIRECTION('',(-0.,0.,-1.)); +#318420 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#318421 = CYLINDRICAL_SURFACE('',#318422,0.29999967471); +#318422 = AXIS2_PLACEMENT_3D('',#318423,#318424,#318425); +#318423 = CARTESIAN_POINT('',(139.00000033943,-119.1244993394,1.51)); +#318424 = DIRECTION('',(-0.,0.,-1.)); +#318425 = DIRECTION('',(0.923879870317,-0.382682616829,-0.)); +#318426 = ADVANCED_FACE('',(#318427),#318443,.T.); +#318427 = FACE_BOUND('',#318428,.T.); +#318428 = EDGE_LOOP('',(#318429,#318430,#318436,#318437)); +#318429 = ORIENTED_EDGE('',*,*,#318407,.T.); +#318430 = ORIENTED_EDGE('',*,*,#318431,.T.); +#318431 = EDGE_CURVE('',#318399,#318110,#318432,.T.); +#318432 = LINE('',#318433,#318434); +#318433 = CARTESIAN_POINT('',(139.238006,-118.941871,1.545)); +#318434 = VECTOR('',#318435,1.); +#318435 = DIRECTION('',(0.500002304048,-0.866024073538,0.)); +#318436 = ORIENTED_EDGE('',*,*,#318107,.F.); +#318437 = ORIENTED_EDGE('',*,*,#318438,.F.); +#318438 = EDGE_CURVE('',#318408,#318108,#318439,.T.); +#318439 = LINE('',#318440,#318441); +#318440 = CARTESIAN_POINT('',(139.238006,-118.941871,1.51)); +#318441 = VECTOR('',#318442,1.); +#318442 = DIRECTION('',(0.500002304048,-0.866024073538,0.)); +#318443 = PLANE('',#318444); +#318444 = AXIS2_PLACEMENT_3D('',#318445,#318446,#318447); +#318445 = CARTESIAN_POINT('',(139.238006,-118.941871,1.51)); +#318446 = DIRECTION('',(0.866024073538,0.500002304048,-0.)); +#318447 = DIRECTION('',(0.500002304048,-0.866024073538,0.)); +#318448 = ADVANCED_FACE('',(#318449),#318476,.F.); +#318449 = FACE_BOUND('',#318450,.T.); +#318450 = EDGE_LOOP('',(#318451,#318461,#318468,#318469)); +#318451 = ORIENTED_EDGE('',*,*,#318452,.T.); +#318452 = EDGE_CURVE('',#318453,#318455,#318457,.T.); +#318453 = VERTEX_POINT('',#318454); +#318454 = CARTESIAN_POINT('',(142.337255,-119.5,1.51)); +#318455 = VERTEX_POINT('',#318456); +#318456 = CARTESIAN_POINT('',(142.337255,-119.5,1.545)); +#318457 = LINE('',#318458,#318459); +#318458 = CARTESIAN_POINT('',(142.337255,-119.5,1.51)); +#318459 = VECTOR('',#318460,1.); +#318460 = DIRECTION('',(0.,0.,1.)); +#318461 = ORIENTED_EDGE('',*,*,#318462,.T.); +#318462 = EDGE_CURVE('',#318455,#318455,#318463,.T.); +#318463 = CIRCLE('',#318464,0.137255); +#318464 = AXIS2_PLACEMENT_3D('',#318465,#318466,#318467); +#318465 = CARTESIAN_POINT('',(142.2,-119.5,1.545)); +#318466 = DIRECTION('',(0.,0.,1.)); +#318467 = DIRECTION('',(1.,0.,-0.)); +#318468 = ORIENTED_EDGE('',*,*,#318452,.F.); +#318469 = ORIENTED_EDGE('',*,*,#318470,.F.); +#318470 = EDGE_CURVE('',#318453,#318453,#318471,.T.); +#318471 = CIRCLE('',#318472,0.137255); +#318472 = AXIS2_PLACEMENT_3D('',#318473,#318474,#318475); +#318473 = CARTESIAN_POINT('',(142.2,-119.5,1.51)); +#318474 = DIRECTION('',(0.,0.,1.)); +#318475 = DIRECTION('',(1.,0.,-0.)); +#318476 = CYLINDRICAL_SURFACE('',#318477,0.137255); +#318477 = AXIS2_PLACEMENT_3D('',#318478,#318479,#318480); +#318478 = CARTESIAN_POINT('',(142.2,-119.5,1.51)); +#318479 = DIRECTION('',(-0.,-0.,-1.)); +#318480 = DIRECTION('',(1.,0.,-0.)); +#318481 = ADVANCED_FACE('',(#318482),#318509,.F.); +#318482 = FACE_BOUND('',#318483,.T.); +#318483 = EDGE_LOOP('',(#318484,#318494,#318501,#318502)); +#318484 = ORIENTED_EDGE('',*,*,#318485,.T.); +#318485 = EDGE_CURVE('',#318486,#318488,#318490,.T.); +#318486 = VERTEX_POINT('',#318487); +#318487 = CARTESIAN_POINT('',(139.137255,-119.124499,1.51)); +#318488 = VERTEX_POINT('',#318489); +#318489 = CARTESIAN_POINT('',(139.137255,-119.124499,1.545)); +#318490 = LINE('',#318491,#318492); +#318491 = CARTESIAN_POINT('',(139.137255,-119.124499,1.51)); +#318492 = VECTOR('',#318493,1.); +#318493 = DIRECTION('',(0.,0.,1.)); +#318494 = ORIENTED_EDGE('',*,*,#318495,.T.); +#318495 = EDGE_CURVE('',#318488,#318488,#318496,.T.); +#318496 = CIRCLE('',#318497,0.137255); +#318497 = AXIS2_PLACEMENT_3D('',#318498,#318499,#318500); +#318498 = CARTESIAN_POINT('',(139.,-119.124499,1.545)); +#318499 = DIRECTION('',(0.,0.,1.)); +#318500 = DIRECTION('',(1.,0.,-0.)); +#318501 = ORIENTED_EDGE('',*,*,#318485,.F.); +#318502 = ORIENTED_EDGE('',*,*,#318503,.F.); +#318503 = EDGE_CURVE('',#318486,#318486,#318504,.T.); +#318504 = CIRCLE('',#318505,0.137255); +#318505 = AXIS2_PLACEMENT_3D('',#318506,#318507,#318508); +#318506 = CARTESIAN_POINT('',(139.,-119.124499,1.51)); +#318507 = DIRECTION('',(0.,0.,1.)); +#318508 = DIRECTION('',(1.,0.,-0.)); +#318509 = CYLINDRICAL_SURFACE('',#318510,0.137255); +#318510 = AXIS2_PLACEMENT_3D('',#318511,#318512,#318513); +#318511 = CARTESIAN_POINT('',(139.,-119.124499,1.51)); +#318512 = DIRECTION('',(-0.,-0.,-1.)); +#318513 = DIRECTION('',(1.,0.,-0.)); +#318514 = ADVANCED_FACE('',(#318515,#318528,#318531),#318534,.F.); +#318515 = FACE_BOUND('',#318516,.T.); +#318516 = EDGE_LOOP('',(#318517,#318518,#318519,#318520,#318521,#318522, + #318523,#318524,#318525,#318526,#318527)); +#318517 = ORIENTED_EDGE('',*,*,#318133,.T.); +#318518 = ORIENTED_EDGE('',*,*,#318164,.T.); +#318519 = ORIENTED_EDGE('',*,*,#318195,.T.); +#318520 = ORIENTED_EDGE('',*,*,#318226,.T.); +#318521 = ORIENTED_EDGE('',*,*,#318258,.T.); +#318522 = ORIENTED_EDGE('',*,*,#318290,.T.); +#318523 = ORIENTED_EDGE('',*,*,#318321,.T.); +#318524 = ORIENTED_EDGE('',*,*,#318352,.T.); +#318525 = ORIENTED_EDGE('',*,*,#318383,.T.); +#318526 = ORIENTED_EDGE('',*,*,#318415,.T.); +#318527 = ORIENTED_EDGE('',*,*,#318438,.T.); +#318528 = FACE_BOUND('',#318529,.T.); +#318529 = EDGE_LOOP('',(#318530)); +#318530 = ORIENTED_EDGE('',*,*,#318470,.T.); +#318531 = FACE_BOUND('',#318532,.T.); +#318532 = EDGE_LOOP('',(#318533)); +#318533 = ORIENTED_EDGE('',*,*,#318503,.T.); +#318534 = PLANE('',#318535); +#318535 = AXIS2_PLACEMENT_3D('',#318536,#318537,#318538); +#318536 = CARTESIAN_POINT('',(0.,0.,1.51)); +#318537 = DIRECTION('',(0.,0.,1.)); +#318538 = DIRECTION('',(1.,0.,-0.)); +#318539 = ADVANCED_FACE('',(#318540,#318553,#318556),#318559,.T.); +#318540 = FACE_BOUND('',#318541,.F.); +#318541 = EDGE_LOOP('',(#318542,#318543,#318544,#318545,#318546,#318547, + #318548,#318549,#318550,#318551,#318552)); +#318542 = ORIENTED_EDGE('',*,*,#318117,.T.); +#318543 = ORIENTED_EDGE('',*,*,#318148,.T.); +#318544 = ORIENTED_EDGE('',*,*,#318179,.T.); +#318545 = ORIENTED_EDGE('',*,*,#318210,.T.); +#318546 = ORIENTED_EDGE('',*,*,#318241,.T.); +#318547 = ORIENTED_EDGE('',*,*,#318274,.T.); +#318548 = ORIENTED_EDGE('',*,*,#318305,.T.); +#318549 = ORIENTED_EDGE('',*,*,#318336,.T.); +#318550 = ORIENTED_EDGE('',*,*,#318367,.T.); +#318551 = ORIENTED_EDGE('',*,*,#318398,.T.); +#318552 = ORIENTED_EDGE('',*,*,#318431,.T.); +#318553 = FACE_BOUND('',#318554,.F.); +#318554 = EDGE_LOOP('',(#318555)); +#318555 = ORIENTED_EDGE('',*,*,#318462,.T.); +#318556 = FACE_BOUND('',#318557,.F.); +#318557 = EDGE_LOOP('',(#318558)); +#318558 = ORIENTED_EDGE('',*,*,#318495,.T.); +#318559 = PLANE('',#318560); +#318560 = AXIS2_PLACEMENT_3D('',#318561,#318562,#318563); +#318561 = CARTESIAN_POINT('',(0.,0.,1.545)); +#318562 = DIRECTION('',(0.,0.,1.)); +#318563 = DIRECTION('',(1.,0.,-0.)); +#318564 = MANIFOLD_SOLID_BREP('',#318565); +#318565 = CLOSED_SHELL('',(#318566,#318606,#318637,#318670,#318701, + #318732,#318765,#318796,#318829,#318851,#318884,#318917,#318940)); +#318566 = ADVANCED_FACE('',(#318567),#318601,.T.); +#318567 = FACE_BOUND('',#318568,.T.); +#318568 = EDGE_LOOP('',(#318569,#318579,#318587,#318595)); +#318569 = ORIENTED_EDGE('',*,*,#318570,.T.); +#318570 = EDGE_CURVE('',#318571,#318573,#318575,.T.); +#318571 = VERTEX_POINT('',#318572); +#318572 = CARTESIAN_POINT('',(136.3,-108.497433,1.51)); +#318573 = VERTEX_POINT('',#318574); +#318574 = CARTESIAN_POINT('',(136.3,-108.497433,1.545)); +#318575 = LINE('',#318576,#318577); +#318576 = CARTESIAN_POINT('',(136.3,-108.497433,1.51)); +#318577 = VECTOR('',#318578,1.); +#318578 = DIRECTION('',(0.,0.,1.)); +#318579 = ORIENTED_EDGE('',*,*,#318580,.T.); +#318580 = EDGE_CURVE('',#318573,#318581,#318583,.T.); +#318581 = VERTEX_POINT('',#318582); +#318582 = CARTESIAN_POINT('',(136.3,-115.818869,1.545)); +#318583 = LINE('',#318584,#318585); +#318584 = CARTESIAN_POINT('',(136.3,-108.497433,1.545)); +#318585 = VECTOR('',#318586,1.); +#318586 = DIRECTION('',(0.,-1.,0.)); +#318587 = ORIENTED_EDGE('',*,*,#318588,.F.); +#318588 = EDGE_CURVE('',#318589,#318581,#318591,.T.); +#318589 = VERTEX_POINT('',#318590); +#318590 = CARTESIAN_POINT('',(136.3,-115.818869,1.51)); +#318591 = LINE('',#318592,#318593); +#318592 = CARTESIAN_POINT('',(136.3,-115.818869,1.51)); +#318593 = VECTOR('',#318594,1.); +#318594 = DIRECTION('',(0.,0.,1.)); +#318595 = ORIENTED_EDGE('',*,*,#318596,.F.); +#318596 = EDGE_CURVE('',#318571,#318589,#318597,.T.); +#318597 = LINE('',#318598,#318599); +#318598 = CARTESIAN_POINT('',(136.3,-108.497433,1.51)); +#318599 = VECTOR('',#318600,1.); +#318600 = DIRECTION('',(0.,-1.,0.)); +#318601 = PLANE('',#318602); +#318602 = AXIS2_PLACEMENT_3D('',#318603,#318604,#318605); +#318603 = CARTESIAN_POINT('',(136.3,-108.497433,1.51)); +#318604 = DIRECTION('',(1.,0.,-0.)); +#318605 = DIRECTION('',(0.,-1.,0.)); +#318606 = ADVANCED_FACE('',(#318607),#318632,.T.); +#318607 = FACE_BOUND('',#318608,.T.); +#318608 = EDGE_LOOP('',(#318609,#318610,#318618,#318626)); +#318609 = ORIENTED_EDGE('',*,*,#318588,.T.); +#318610 = ORIENTED_EDGE('',*,*,#318611,.T.); +#318611 = EDGE_CURVE('',#318581,#318612,#318614,.T.); +#318612 = VERTEX_POINT('',#318613); +#318613 = CARTESIAN_POINT('',(136.314805,-115.822836,1.545)); +#318614 = LINE('',#318615,#318616); +#318615 = CARTESIAN_POINT('',(136.3,-115.818869,1.545)); +#318616 = VECTOR('',#318617,1.); +#318617 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#318618 = ORIENTED_EDGE('',*,*,#318619,.F.); +#318619 = EDGE_CURVE('',#318620,#318612,#318622,.T.); +#318620 = VERTEX_POINT('',#318621); +#318621 = CARTESIAN_POINT('',(136.314805,-115.822836,1.51)); +#318622 = LINE('',#318623,#318624); +#318623 = CARTESIAN_POINT('',(136.314805,-115.822836,1.51)); +#318624 = VECTOR('',#318625,1.); +#318625 = DIRECTION('',(0.,0.,1.)); +#318626 = ORIENTED_EDGE('',*,*,#318627,.F.); +#318627 = EDGE_CURVE('',#318589,#318620,#318628,.T.); +#318628 = LINE('',#318629,#318630); +#318629 = CARTESIAN_POINT('',(136.3,-115.818869,1.51)); +#318630 = VECTOR('',#318631,1.); +#318631 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#318632 = PLANE('',#318633); +#318633 = AXIS2_PLACEMENT_3D('',#318634,#318635,#318636); +#318634 = CARTESIAN_POINT('',(136.3,-115.818869,1.51)); +#318635 = DIRECTION('',(0.258819788118,0.965925627198,-0.)); +#318636 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#318637 = ADVANCED_FACE('',(#318638),#318665,.T.); +#318638 = FACE_BOUND('',#318639,.T.); +#318639 = EDGE_LOOP('',(#318640,#318641,#318650,#318658)); +#318640 = ORIENTED_EDGE('',*,*,#318619,.T.); +#318641 = ORIENTED_EDGE('',*,*,#318642,.T.); +#318642 = EDGE_CURVE('',#318612,#318643,#318645,.T.); +#318643 = VERTEX_POINT('',#318644); +#318644 = CARTESIAN_POINT('',(136.085195,-115.822836,1.545)); +#318645 = CIRCLE('',#318646,0.299999850918); +#318646 = AXIS2_PLACEMENT_3D('',#318647,#318648,#318649); +#318647 = CARTESIAN_POINT('',(136.2,-116.0999997106,1.545)); +#318648 = DIRECTION('',(0.,0.,-1.)); +#318649 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#318650 = ORIENTED_EDGE('',*,*,#318651,.F.); +#318651 = EDGE_CURVE('',#318652,#318643,#318654,.T.); +#318652 = VERTEX_POINT('',#318653); +#318653 = CARTESIAN_POINT('',(136.085195,-115.822836,1.51)); +#318654 = LINE('',#318655,#318656); +#318655 = CARTESIAN_POINT('',(136.085195,-115.822836,1.51)); +#318656 = VECTOR('',#318657,1.); +#318657 = DIRECTION('',(0.,0.,1.)); +#318658 = ORIENTED_EDGE('',*,*,#318659,.F.); +#318659 = EDGE_CURVE('',#318620,#318652,#318660,.T.); +#318660 = CIRCLE('',#318661,0.299999850918); +#318661 = AXIS2_PLACEMENT_3D('',#318662,#318663,#318664); +#318662 = CARTESIAN_POINT('',(136.2,-116.0999997106,1.51)); +#318663 = DIRECTION('',(0.,0.,-1.)); +#318664 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#318665 = CYLINDRICAL_SURFACE('',#318666,0.299999850918); +#318666 = AXIS2_PLACEMENT_3D('',#318667,#318668,#318669); +#318667 = CARTESIAN_POINT('',(136.2,-116.0999997106,1.51)); +#318668 = DIRECTION('',(0.,0.,-1.)); +#318669 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#318670 = ADVANCED_FACE('',(#318671),#318696,.T.); +#318671 = FACE_BOUND('',#318672,.T.); +#318672 = EDGE_LOOP('',(#318673,#318674,#318682,#318690)); +#318673 = ORIENTED_EDGE('',*,*,#318651,.T.); +#318674 = ORIENTED_EDGE('',*,*,#318675,.T.); +#318675 = EDGE_CURVE('',#318643,#318676,#318678,.T.); +#318676 = VERTEX_POINT('',#318677); +#318677 = CARTESIAN_POINT('',(136.1,-115.818869,1.545)); +#318678 = LINE('',#318679,#318680); +#318679 = CARTESIAN_POINT('',(136.085195,-115.822836,1.545)); +#318680 = VECTOR('',#318681,1.); +#318681 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#318682 = ORIENTED_EDGE('',*,*,#318683,.F.); +#318683 = EDGE_CURVE('',#318684,#318676,#318686,.T.); +#318684 = VERTEX_POINT('',#318685); +#318685 = CARTESIAN_POINT('',(136.1,-115.818869,1.51)); +#318686 = LINE('',#318687,#318688); +#318687 = CARTESIAN_POINT('',(136.1,-115.818869,1.51)); +#318688 = VECTOR('',#318689,1.); +#318689 = DIRECTION('',(0.,0.,1.)); +#318690 = ORIENTED_EDGE('',*,*,#318691,.F.); +#318691 = EDGE_CURVE('',#318652,#318684,#318692,.T.); +#318692 = LINE('',#318693,#318694); +#318693 = CARTESIAN_POINT('',(136.085195,-115.822836,1.51)); +#318694 = VECTOR('',#318695,1.); +#318695 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#318696 = PLANE('',#318697); +#318697 = AXIS2_PLACEMENT_3D('',#318698,#318699,#318700); +#318698 = CARTESIAN_POINT('',(136.085195,-115.822836,1.51)); +#318699 = DIRECTION('',(-0.258819788118,0.965925627198,0.)); +#318700 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#318701 = ADVANCED_FACE('',(#318702),#318727,.T.); +#318702 = FACE_BOUND('',#318703,.T.); +#318703 = EDGE_LOOP('',(#318704,#318705,#318713,#318721)); +#318704 = ORIENTED_EDGE('',*,*,#318683,.T.); +#318705 = ORIENTED_EDGE('',*,*,#318706,.T.); +#318706 = EDGE_CURVE('',#318676,#318707,#318709,.T.); +#318707 = VERTEX_POINT('',#318708); +#318708 = CARTESIAN_POINT('',(136.1,-108.44241,1.545)); +#318709 = LINE('',#318710,#318711); +#318710 = CARTESIAN_POINT('',(136.1,-115.818869,1.545)); +#318711 = VECTOR('',#318712,1.); +#318712 = DIRECTION('',(0.,1.,0.)); +#318713 = ORIENTED_EDGE('',*,*,#318714,.F.); +#318714 = EDGE_CURVE('',#318715,#318707,#318717,.T.); +#318715 = VERTEX_POINT('',#318716); +#318716 = CARTESIAN_POINT('',(136.1,-108.44241,1.51)); +#318717 = LINE('',#318718,#318719); +#318718 = CARTESIAN_POINT('',(136.1,-108.44241,1.51)); +#318719 = VECTOR('',#318720,1.); +#318720 = DIRECTION('',(0.,0.,1.)); +#318721 = ORIENTED_EDGE('',*,*,#318722,.F.); +#318722 = EDGE_CURVE('',#318684,#318715,#318723,.T.); +#318723 = LINE('',#318724,#318725); +#318724 = CARTESIAN_POINT('',(136.1,-115.818869,1.51)); +#318725 = VECTOR('',#318726,1.); +#318726 = DIRECTION('',(0.,1.,0.)); +#318727 = PLANE('',#318728); +#318728 = AXIS2_PLACEMENT_3D('',#318729,#318730,#318731); +#318729 = CARTESIAN_POINT('',(136.1,-115.818869,1.51)); +#318730 = DIRECTION('',(-1.,0.,0.)); +#318731 = DIRECTION('',(0.,1.,0.)); +#318732 = ADVANCED_FACE('',(#318733),#318760,.T.); +#318733 = FACE_BOUND('',#318734,.T.); +#318734 = EDGE_LOOP('',(#318735,#318736,#318745,#318753)); +#318735 = ORIENTED_EDGE('',*,*,#318714,.T.); +#318736 = ORIENTED_EDGE('',*,*,#318737,.T.); +#318737 = EDGE_CURVE('',#318707,#318738,#318740,.T.); +#318738 = VERTEX_POINT('',#318739); +#318739 = CARTESIAN_POINT('',(135.977567,-108.239158,1.545)); +#318740 = CIRCLE('',#318741,0.291638856978); +#318741 = AXIS2_PLACEMENT_3D('',#318742,#318743,#318744); +#318742 = CARTESIAN_POINT('',(136.26699502636,-108.2033161187,1.545)); +#318743 = DIRECTION('',(0.,0.,-1.)); +#318744 = DIRECTION('',(-0.572608972943,-0.81982861874,-0.)); +#318745 = ORIENTED_EDGE('',*,*,#318746,.F.); +#318746 = EDGE_CURVE('',#318747,#318738,#318749,.T.); +#318747 = VERTEX_POINT('',#318748); +#318748 = CARTESIAN_POINT('',(135.977567,-108.239158,1.51)); +#318749 = LINE('',#318750,#318751); +#318750 = CARTESIAN_POINT('',(135.977567,-108.239158,1.51)); +#318751 = VECTOR('',#318752,1.); +#318752 = DIRECTION('',(0.,0.,1.)); +#318753 = ORIENTED_EDGE('',*,*,#318754,.F.); +#318754 = EDGE_CURVE('',#318715,#318747,#318755,.T.); +#318755 = CIRCLE('',#318756,0.291638856978); +#318756 = AXIS2_PLACEMENT_3D('',#318757,#318758,#318759); +#318757 = CARTESIAN_POINT('',(136.26699502636,-108.2033161187,1.51)); +#318758 = DIRECTION('',(0.,0.,-1.)); +#318759 = DIRECTION('',(-0.572608972943,-0.81982861874,-0.)); +#318760 = CYLINDRICAL_SURFACE('',#318761,0.291638856978); +#318761 = AXIS2_PLACEMENT_3D('',#318762,#318763,#318764); +#318762 = CARTESIAN_POINT('',(136.26699502636,-108.2033161187,1.51)); +#318763 = DIRECTION('',(0.,0.,-1.)); +#318764 = DIRECTION('',(-0.572608972943,-0.81982861874,-0.)); +#318765 = ADVANCED_FACE('',(#318766),#318791,.T.); +#318766 = FACE_BOUND('',#318767,.T.); +#318767 = EDGE_LOOP('',(#318768,#318769,#318777,#318785)); +#318768 = ORIENTED_EDGE('',*,*,#318746,.T.); +#318769 = ORIENTED_EDGE('',*,*,#318770,.T.); +#318770 = EDGE_CURVE('',#318738,#318771,#318773,.T.); +#318771 = VERTEX_POINT('',#318772); +#318772 = CARTESIAN_POINT('',(135.977567,-108.160842,1.545)); +#318773 = LINE('',#318774,#318775); +#318774 = CARTESIAN_POINT('',(135.977567,-108.239158,1.545)); +#318775 = VECTOR('',#318776,1.); +#318776 = DIRECTION('',(0.,1.,0.)); +#318777 = ORIENTED_EDGE('',*,*,#318778,.F.); +#318778 = EDGE_CURVE('',#318779,#318771,#318781,.T.); +#318779 = VERTEX_POINT('',#318780); +#318780 = CARTESIAN_POINT('',(135.977567,-108.160842,1.51)); +#318781 = LINE('',#318782,#318783); +#318782 = CARTESIAN_POINT('',(135.977567,-108.160842,1.51)); +#318783 = VECTOR('',#318784,1.); +#318784 = DIRECTION('',(0.,0.,1.)); +#318785 = ORIENTED_EDGE('',*,*,#318786,.F.); +#318786 = EDGE_CURVE('',#318747,#318779,#318787,.T.); +#318787 = LINE('',#318788,#318789); +#318788 = CARTESIAN_POINT('',(135.977567,-108.239158,1.51)); +#318789 = VECTOR('',#318790,1.); +#318790 = DIRECTION('',(0.,1.,0.)); +#318791 = PLANE('',#318792); +#318792 = AXIS2_PLACEMENT_3D('',#318793,#318794,#318795); +#318793 = CARTESIAN_POINT('',(135.977567,-108.239158,1.51)); +#318794 = DIRECTION('',(-1.,0.,0.)); +#318795 = DIRECTION('',(0.,1.,0.)); +#318796 = ADVANCED_FACE('',(#318797),#318824,.T.); +#318797 = FACE_BOUND('',#318798,.T.); +#318798 = EDGE_LOOP('',(#318799,#318800,#318809,#318817)); +#318799 = ORIENTED_EDGE('',*,*,#318778,.T.); +#318800 = ORIENTED_EDGE('',*,*,#318801,.T.); +#318801 = EDGE_CURVE('',#318771,#318802,#318804,.T.); +#318802 = VERTEX_POINT('',#318803); +#318803 = CARTESIAN_POINT('',(136.314158,-108.497433,1.545)); +#318804 = CIRCLE('',#318805,0.299999784661); +#318805 = AXIS2_PLACEMENT_3D('',#318806,#318807,#318808); +#318806 = CARTESIAN_POINT('',(136.2750002562,-108.1999997437,1.545)); +#318807 = DIRECTION('',(0.,0.,-1.)); +#318808 = DIRECTION('',(-0.991444899011,0.130525906337,0.)); +#318809 = ORIENTED_EDGE('',*,*,#318810,.F.); +#318810 = EDGE_CURVE('',#318811,#318802,#318813,.T.); +#318811 = VERTEX_POINT('',#318812); +#318812 = CARTESIAN_POINT('',(136.314158,-108.497433,1.51)); +#318813 = LINE('',#318814,#318815); +#318814 = CARTESIAN_POINT('',(136.314158,-108.497433,1.51)); +#318815 = VECTOR('',#318816,1.); +#318816 = DIRECTION('',(0.,0.,1.)); +#318817 = ORIENTED_EDGE('',*,*,#318818,.F.); +#318818 = EDGE_CURVE('',#318779,#318811,#318819,.T.); +#318819 = CIRCLE('',#318820,0.299999784661); +#318820 = AXIS2_PLACEMENT_3D('',#318821,#318822,#318823); +#318821 = CARTESIAN_POINT('',(136.2750002562,-108.1999997437,1.51)); +#318822 = DIRECTION('',(0.,0.,-1.)); +#318823 = DIRECTION('',(-0.991444899011,0.130525906337,0.)); +#318824 = CYLINDRICAL_SURFACE('',#318825,0.299999784661); +#318825 = AXIS2_PLACEMENT_3D('',#318826,#318827,#318828); +#318826 = CARTESIAN_POINT('',(136.2750002562,-108.1999997437,1.51)); +#318827 = DIRECTION('',(0.,0.,-1.)); +#318828 = DIRECTION('',(-0.991444899011,0.130525906337,0.)); +#318829 = ADVANCED_FACE('',(#318830),#318846,.T.); +#318830 = FACE_BOUND('',#318831,.T.); +#318831 = EDGE_LOOP('',(#318832,#318833,#318839,#318840)); +#318832 = ORIENTED_EDGE('',*,*,#318810,.T.); +#318833 = ORIENTED_EDGE('',*,*,#318834,.T.); +#318834 = EDGE_CURVE('',#318802,#318573,#318835,.T.); +#318835 = LINE('',#318836,#318837); +#318836 = CARTESIAN_POINT('',(136.314158,-108.497433,1.545)); +#318837 = VECTOR('',#318838,1.); +#318838 = DIRECTION('',(-1.,0.,0.)); +#318839 = ORIENTED_EDGE('',*,*,#318570,.F.); +#318840 = ORIENTED_EDGE('',*,*,#318841,.F.); +#318841 = EDGE_CURVE('',#318811,#318571,#318842,.T.); +#318842 = LINE('',#318843,#318844); +#318843 = CARTESIAN_POINT('',(136.314158,-108.497433,1.51)); +#318844 = VECTOR('',#318845,1.); +#318845 = DIRECTION('',(-1.,0.,0.)); +#318846 = PLANE('',#318847); +#318847 = AXIS2_PLACEMENT_3D('',#318848,#318849,#318850); +#318848 = CARTESIAN_POINT('',(136.314158,-108.497433,1.51)); +#318849 = DIRECTION('',(0.,-1.,0.)); +#318850 = DIRECTION('',(-1.,0.,0.)); +#318851 = ADVANCED_FACE('',(#318852),#318879,.F.); +#318852 = FACE_BOUND('',#318853,.T.); +#318853 = EDGE_LOOP('',(#318854,#318864,#318871,#318872)); +#318854 = ORIENTED_EDGE('',*,*,#318855,.T.); +#318855 = EDGE_CURVE('',#318856,#318858,#318860,.T.); +#318856 = VERTEX_POINT('',#318857); +#318857 = CARTESIAN_POINT('',(136.337255,-116.1,1.51)); +#318858 = VERTEX_POINT('',#318859); +#318859 = CARTESIAN_POINT('',(136.337255,-116.1,1.545)); +#318860 = LINE('',#318861,#318862); +#318861 = CARTESIAN_POINT('',(136.337255,-116.1,1.51)); +#318862 = VECTOR('',#318863,1.); +#318863 = DIRECTION('',(0.,0.,1.)); +#318864 = ORIENTED_EDGE('',*,*,#318865,.T.); +#318865 = EDGE_CURVE('',#318858,#318858,#318866,.T.); +#318866 = CIRCLE('',#318867,0.137255); +#318867 = AXIS2_PLACEMENT_3D('',#318868,#318869,#318870); +#318868 = CARTESIAN_POINT('',(136.2,-116.1,1.545)); +#318869 = DIRECTION('',(0.,0.,1.)); +#318870 = DIRECTION('',(1.,0.,-0.)); +#318871 = ORIENTED_EDGE('',*,*,#318855,.F.); +#318872 = ORIENTED_EDGE('',*,*,#318873,.F.); +#318873 = EDGE_CURVE('',#318856,#318856,#318874,.T.); +#318874 = CIRCLE('',#318875,0.137255); +#318875 = AXIS2_PLACEMENT_3D('',#318876,#318877,#318878); +#318876 = CARTESIAN_POINT('',(136.2,-116.1,1.51)); +#318877 = DIRECTION('',(0.,0.,1.)); +#318878 = DIRECTION('',(1.,0.,-0.)); +#318879 = CYLINDRICAL_SURFACE('',#318880,0.137255); +#318880 = AXIS2_PLACEMENT_3D('',#318881,#318882,#318883); +#318881 = CARTESIAN_POINT('',(136.2,-116.1,1.51)); +#318882 = DIRECTION('',(-0.,-0.,-1.)); +#318883 = DIRECTION('',(1.,0.,-0.)); +#318884 = ADVANCED_FACE('',(#318885),#318912,.F.); +#318885 = FACE_BOUND('',#318886,.T.); +#318886 = EDGE_LOOP('',(#318887,#318897,#318904,#318905)); +#318887 = ORIENTED_EDGE('',*,*,#318888,.T.); +#318888 = EDGE_CURVE('',#318889,#318891,#318893,.T.); +#318889 = VERTEX_POINT('',#318890); +#318890 = CARTESIAN_POINT('',(136.412255,-108.2,1.51)); +#318891 = VERTEX_POINT('',#318892); +#318892 = CARTESIAN_POINT('',(136.412255,-108.2,1.545)); +#318893 = LINE('',#318894,#318895); +#318894 = CARTESIAN_POINT('',(136.412255,-108.2,1.51)); +#318895 = VECTOR('',#318896,1.); +#318896 = DIRECTION('',(0.,0.,1.)); +#318897 = ORIENTED_EDGE('',*,*,#318898,.T.); +#318898 = EDGE_CURVE('',#318891,#318891,#318899,.T.); +#318899 = CIRCLE('',#318900,0.137255); +#318900 = AXIS2_PLACEMENT_3D('',#318901,#318902,#318903); +#318901 = CARTESIAN_POINT('',(136.275,-108.2,1.545)); +#318902 = DIRECTION('',(0.,0.,1.)); +#318903 = DIRECTION('',(1.,0.,-0.)); +#318904 = ORIENTED_EDGE('',*,*,#318888,.F.); +#318905 = ORIENTED_EDGE('',*,*,#318906,.F.); +#318906 = EDGE_CURVE('',#318889,#318889,#318907,.T.); +#318907 = CIRCLE('',#318908,0.137255); +#318908 = AXIS2_PLACEMENT_3D('',#318909,#318910,#318911); +#318909 = CARTESIAN_POINT('',(136.275,-108.2,1.51)); +#318910 = DIRECTION('',(0.,0.,1.)); +#318911 = DIRECTION('',(1.,0.,-0.)); +#318912 = CYLINDRICAL_SURFACE('',#318913,0.137255); +#318913 = AXIS2_PLACEMENT_3D('',#318914,#318915,#318916); +#318914 = CARTESIAN_POINT('',(136.275,-108.2,1.51)); +#318915 = DIRECTION('',(-0.,-0.,-1.)); +#318916 = DIRECTION('',(1.,0.,-0.)); +#318917 = ADVANCED_FACE('',(#318918,#318929,#318932),#318935,.F.); +#318918 = FACE_BOUND('',#318919,.T.); +#318919 = EDGE_LOOP('',(#318920,#318921,#318922,#318923,#318924,#318925, + #318926,#318927,#318928)); +#318920 = ORIENTED_EDGE('',*,*,#318596,.T.); +#318921 = ORIENTED_EDGE('',*,*,#318627,.T.); +#318922 = ORIENTED_EDGE('',*,*,#318659,.T.); +#318923 = ORIENTED_EDGE('',*,*,#318691,.T.); +#318924 = ORIENTED_EDGE('',*,*,#318722,.T.); +#318925 = ORIENTED_EDGE('',*,*,#318754,.T.); +#318926 = ORIENTED_EDGE('',*,*,#318786,.T.); +#318927 = ORIENTED_EDGE('',*,*,#318818,.T.); +#318928 = ORIENTED_EDGE('',*,*,#318841,.T.); +#318929 = FACE_BOUND('',#318930,.T.); +#318930 = EDGE_LOOP('',(#318931)); +#318931 = ORIENTED_EDGE('',*,*,#318873,.T.); +#318932 = FACE_BOUND('',#318933,.T.); +#318933 = EDGE_LOOP('',(#318934)); +#318934 = ORIENTED_EDGE('',*,*,#318906,.T.); +#318935 = PLANE('',#318936); +#318936 = AXIS2_PLACEMENT_3D('',#318937,#318938,#318939); +#318937 = CARTESIAN_POINT('',(0.,0.,1.51)); +#318938 = DIRECTION('',(0.,0.,1.)); +#318939 = DIRECTION('',(1.,0.,-0.)); +#318940 = ADVANCED_FACE('',(#318941,#318952,#318955),#318958,.T.); +#318941 = FACE_BOUND('',#318942,.F.); +#318942 = EDGE_LOOP('',(#318943,#318944,#318945,#318946,#318947,#318948, + #318949,#318950,#318951)); +#318943 = ORIENTED_EDGE('',*,*,#318580,.T.); +#318944 = ORIENTED_EDGE('',*,*,#318611,.T.); +#318945 = ORIENTED_EDGE('',*,*,#318642,.T.); +#318946 = ORIENTED_EDGE('',*,*,#318675,.T.); +#318947 = ORIENTED_EDGE('',*,*,#318706,.T.); +#318948 = ORIENTED_EDGE('',*,*,#318737,.T.); +#318949 = ORIENTED_EDGE('',*,*,#318770,.T.); +#318950 = ORIENTED_EDGE('',*,*,#318801,.T.); +#318951 = ORIENTED_EDGE('',*,*,#318834,.T.); +#318952 = FACE_BOUND('',#318953,.F.); +#318953 = EDGE_LOOP('',(#318954)); +#318954 = ORIENTED_EDGE('',*,*,#318865,.T.); +#318955 = FACE_BOUND('',#318956,.F.); +#318956 = EDGE_LOOP('',(#318957)); +#318957 = ORIENTED_EDGE('',*,*,#318898,.T.); +#318958 = PLANE('',#318959); +#318959 = AXIS2_PLACEMENT_3D('',#318960,#318961,#318962); +#318960 = CARTESIAN_POINT('',(0.,0.,1.545)); +#318961 = DIRECTION('',(0.,0.,1.)); +#318962 = DIRECTION('',(1.,0.,-0.)); +#318963 = MANIFOLD_SOLID_BREP('',#318964); +#318964 = CLOSED_SHELL('',(#318965,#319005,#319038,#319069,#319102, + #319133,#319164,#319197,#319228,#319261,#319283,#319316,#319337)); +#318965 = ADVANCED_FACE('',(#318966),#319000,.T.); +#318966 = FACE_BOUND('',#318967,.T.); +#318967 = EDGE_LOOP('',(#318968,#318978,#318986,#318994)); +#318968 = ORIENTED_EDGE('',*,*,#318969,.T.); +#318969 = EDGE_CURVE('',#318970,#318972,#318974,.T.); +#318970 = VERTEX_POINT('',#318971); +#318971 = CARTESIAN_POINT('',(124.910544,-88.900735,1.51)); +#318972 = VERTEX_POINT('',#318973); +#318973 = CARTESIAN_POINT('',(124.910544,-88.900735,1.545)); +#318974 = LINE('',#318975,#318976); +#318975 = CARTESIAN_POINT('',(124.910544,-88.900735,1.51)); +#318976 = VECTOR('',#318977,1.); +#318977 = DIRECTION('',(0.,0.,1.)); +#318978 = ORIENTED_EDGE('',*,*,#318979,.T.); +#318979 = EDGE_CURVE('',#318972,#318980,#318982,.T.); +#318980 = VERTEX_POINT('',#318981); +#318981 = CARTESIAN_POINT('',(125.400244,-88.902656,1.545)); +#318982 = LINE('',#318983,#318984); +#318983 = CARTESIAN_POINT('',(124.910544,-88.900735,1.545)); +#318984 = VECTOR('',#318985,1.); +#318985 = DIRECTION('',(0.99999230587,-3.922779700985E-03,0.)); +#318986 = ORIENTED_EDGE('',*,*,#318987,.F.); +#318987 = EDGE_CURVE('',#318988,#318980,#318990,.T.); +#318988 = VERTEX_POINT('',#318989); +#318989 = CARTESIAN_POINT('',(125.400244,-88.902656,1.51)); +#318990 = LINE('',#318991,#318992); +#318991 = CARTESIAN_POINT('',(125.400244,-88.902656,1.51)); +#318992 = VECTOR('',#318993,1.); +#318993 = DIRECTION('',(0.,0.,1.)); +#318994 = ORIENTED_EDGE('',*,*,#318995,.F.); +#318995 = EDGE_CURVE('',#318970,#318988,#318996,.T.); +#318996 = LINE('',#318997,#318998); +#318997 = CARTESIAN_POINT('',(124.910544,-88.900735,1.51)); +#318998 = VECTOR('',#318999,1.); +#318999 = DIRECTION('',(0.99999230587,-3.922779700985E-03,0.)); +#319000 = PLANE('',#319001); +#319001 = AXIS2_PLACEMENT_3D('',#319002,#319003,#319004); +#319002 = CARTESIAN_POINT('',(124.910544,-88.900735,1.51)); +#319003 = DIRECTION('',(3.922779700985E-03,0.99999230587,-0.)); +#319004 = DIRECTION('',(0.99999230587,-3.922779700985E-03,0.)); +#319005 = ADVANCED_FACE('',(#319006),#319033,.T.); +#319006 = FACE_BOUND('',#319007,.T.); +#319007 = EDGE_LOOP('',(#319008,#319009,#319018,#319026)); +#319008 = ORIENTED_EDGE('',*,*,#318987,.T.); +#319009 = ORIENTED_EDGE('',*,*,#319010,.T.); +#319010 = EDGE_CURVE('',#318980,#319011,#319013,.T.); +#319011 = VERTEX_POINT('',#319012); +#319012 = CARTESIAN_POINT('',(125.578079,-89.080491,1.545)); +#319013 = CIRCLE('',#319014,0.282178978979); +#319014 = AXIS2_PLACEMENT_3D('',#319015,#319016,#319017); +#319015 = CARTESIAN_POINT('',(125.31053852756,-89.17019647243,1.545)); +#319016 = DIRECTION('',(0.,0.,-1.)); +#319017 = DIRECTION('',(0.317902746557,0.94812332728,0.)); +#319018 = ORIENTED_EDGE('',*,*,#319019,.F.); +#319019 = EDGE_CURVE('',#319020,#319011,#319022,.T.); +#319020 = VERTEX_POINT('',#319021); +#319021 = CARTESIAN_POINT('',(125.578079,-89.080491,1.51)); +#319022 = LINE('',#319023,#319024); +#319023 = CARTESIAN_POINT('',(125.578079,-89.080491,1.51)); +#319024 = VECTOR('',#319025,1.); +#319025 = DIRECTION('',(0.,0.,1.)); +#319026 = ORIENTED_EDGE('',*,*,#319027,.F.); +#319027 = EDGE_CURVE('',#318988,#319020,#319028,.T.); +#319028 = CIRCLE('',#319029,0.282178978979); +#319029 = AXIS2_PLACEMENT_3D('',#319030,#319031,#319032); +#319030 = CARTESIAN_POINT('',(125.31053852756,-89.17019647243,1.51)); +#319031 = DIRECTION('',(0.,0.,-1.)); +#319032 = DIRECTION('',(0.317902746557,0.94812332728,0.)); +#319033 = CYLINDRICAL_SURFACE('',#319034,0.282178978979); +#319034 = AXIS2_PLACEMENT_3D('',#319035,#319036,#319037); +#319035 = CARTESIAN_POINT('',(125.31053852756,-89.17019647243,1.51)); +#319036 = DIRECTION('',(0.,0.,-1.)); +#319037 = DIRECTION('',(0.317902746557,0.94812332728,0.)); +#319038 = ADVANCED_FACE('',(#319039),#319064,.T.); +#319039 = FACE_BOUND('',#319040,.T.); +#319040 = EDGE_LOOP('',(#319041,#319042,#319050,#319058)); +#319041 = ORIENTED_EDGE('',*,*,#319019,.T.); +#319042 = ORIENTED_EDGE('',*,*,#319043,.T.); +#319043 = EDGE_CURVE('',#319011,#319044,#319046,.T.); +#319044 = VERTEX_POINT('',#319045); +#319045 = CARTESIAN_POINT('',(125.578079,-89.119509,1.545)); +#319046 = LINE('',#319047,#319048); +#319047 = CARTESIAN_POINT('',(125.578079,-89.080491,1.545)); +#319048 = VECTOR('',#319049,1.); +#319049 = DIRECTION('',(0.,-1.,0.)); +#319050 = ORIENTED_EDGE('',*,*,#319051,.F.); +#319051 = EDGE_CURVE('',#319052,#319044,#319054,.T.); +#319052 = VERTEX_POINT('',#319053); +#319053 = CARTESIAN_POINT('',(125.578079,-89.119509,1.51)); +#319054 = LINE('',#319055,#319056); +#319055 = CARTESIAN_POINT('',(125.578079,-89.119509,1.51)); +#319056 = VECTOR('',#319057,1.); +#319057 = DIRECTION('',(0.,0.,1.)); +#319058 = ORIENTED_EDGE('',*,*,#319059,.F.); +#319059 = EDGE_CURVE('',#319020,#319052,#319060,.T.); +#319060 = LINE('',#319061,#319062); +#319061 = CARTESIAN_POINT('',(125.578079,-89.080491,1.51)); +#319062 = VECTOR('',#319063,1.); +#319063 = DIRECTION('',(0.,-1.,0.)); +#319064 = PLANE('',#319065); +#319065 = AXIS2_PLACEMENT_3D('',#319066,#319067,#319068); +#319066 = CARTESIAN_POINT('',(125.578079,-89.080491,1.51)); +#319067 = DIRECTION('',(1.,0.,-0.)); +#319068 = DIRECTION('',(0.,-1.,0.)); +#319069 = ADVANCED_FACE('',(#319070),#319097,.T.); +#319070 = FACE_BOUND('',#319071,.T.); +#319071 = EDGE_LOOP('',(#319072,#319073,#319082,#319090)); +#319072 = ORIENTED_EDGE('',*,*,#319051,.T.); +#319073 = ORIENTED_EDGE('',*,*,#319074,.T.); +#319074 = EDGE_CURVE('',#319044,#319075,#319077,.T.); +#319075 = VERTEX_POINT('',#319076); +#319076 = CARTESIAN_POINT('',(125.424443,-89.183147,1.545)); +#319077 = CIRCLE('',#319078,0.100000590676); +#319078 = AXIS2_PLACEMENT_3D('',#319079,#319080,#319081); +#319079 = CARTESIAN_POINT('',(125.48,-89.0999993128,1.545)); +#319080 = DIRECTION('',(-0.,0.,-1.)); +#319081 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#319082 = ORIENTED_EDGE('',*,*,#319083,.F.); +#319083 = EDGE_CURVE('',#319084,#319075,#319086,.T.); +#319084 = VERTEX_POINT('',#319085); +#319085 = CARTESIAN_POINT('',(125.424443,-89.183147,1.51)); +#319086 = LINE('',#319087,#319088); +#319087 = CARTESIAN_POINT('',(125.424443,-89.183147,1.51)); +#319088 = VECTOR('',#319089,1.); +#319089 = DIRECTION('',(0.,0.,1.)); +#319090 = ORIENTED_EDGE('',*,*,#319091,.F.); +#319091 = EDGE_CURVE('',#319052,#319084,#319092,.T.); +#319092 = CIRCLE('',#319093,0.100000590676); +#319093 = AXIS2_PLACEMENT_3D('',#319094,#319095,#319096); +#319094 = CARTESIAN_POINT('',(125.48,-89.0999993128,1.51)); +#319095 = DIRECTION('',(-0.,0.,-1.)); +#319096 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#319097 = CYLINDRICAL_SURFACE('',#319098,0.100000590676); +#319098 = AXIS2_PLACEMENT_3D('',#319099,#319100,#319101); +#319099 = CARTESIAN_POINT('',(125.48,-89.0999993128,1.51)); +#319100 = DIRECTION('',(-0.,0.,-1.)); +#319101 = DIRECTION('',(0.98078420674,-0.19509571961,-0.)); +#319102 = ADVANCED_FACE('',(#319103),#319128,.T.); +#319103 = FACE_BOUND('',#319104,.T.); +#319104 = EDGE_LOOP('',(#319105,#319106,#319114,#319122)); +#319105 = ORIENTED_EDGE('',*,*,#319083,.T.); +#319106 = ORIENTED_EDGE('',*,*,#319107,.T.); +#319107 = EDGE_CURVE('',#319075,#319108,#319110,.T.); +#319108 = VERTEX_POINT('',#319109); +#319109 = CARTESIAN_POINT('',(125.339313,-89.100735,1.545)); +#319110 = LINE('',#319111,#319112); +#319111 = CARTESIAN_POINT('',(125.424443,-89.183147,1.545)); +#319112 = VECTOR('',#319113,1.); +#319113 = DIRECTION('',(-0.718483492842,0.695544010479,0.)); +#319114 = ORIENTED_EDGE('',*,*,#319115,.F.); +#319115 = EDGE_CURVE('',#319116,#319108,#319118,.T.); +#319116 = VERTEX_POINT('',#319117); +#319117 = CARTESIAN_POINT('',(125.339313,-89.100735,1.51)); +#319118 = LINE('',#319119,#319120); +#319119 = CARTESIAN_POINT('',(125.339313,-89.100735,1.51)); +#319120 = VECTOR('',#319121,1.); +#319121 = DIRECTION('',(0.,0.,1.)); +#319122 = ORIENTED_EDGE('',*,*,#319123,.F.); +#319123 = EDGE_CURVE('',#319084,#319116,#319124,.T.); +#319124 = LINE('',#319125,#319126); +#319125 = CARTESIAN_POINT('',(125.424443,-89.183147,1.51)); +#319126 = VECTOR('',#319127,1.); +#319127 = DIRECTION('',(-0.718483492842,0.695544010479,0.)); +#319128 = PLANE('',#319129); +#319129 = AXIS2_PLACEMENT_3D('',#319130,#319131,#319132); +#319130 = CARTESIAN_POINT('',(125.424443,-89.183147,1.51)); +#319131 = DIRECTION('',(-0.695544010479,-0.718483492842,0.)); +#319132 = DIRECTION('',(-0.718483492842,0.695544010479,0.)); +#319133 = ADVANCED_FACE('',(#319134),#319159,.T.); +#319134 = FACE_BOUND('',#319135,.T.); +#319135 = EDGE_LOOP('',(#319136,#319137,#319145,#319153)); +#319136 = ORIENTED_EDGE('',*,*,#319115,.T.); +#319137 = ORIENTED_EDGE('',*,*,#319138,.T.); +#319138 = EDGE_CURVE('',#319108,#319139,#319141,.T.); +#319139 = VERTEX_POINT('',#319140); +#319140 = CARTESIAN_POINT('',(124.957099,-89.100735,1.545)); +#319141 = LINE('',#319142,#319143); +#319142 = CARTESIAN_POINT('',(125.339313,-89.100735,1.545)); +#319143 = VECTOR('',#319144,1.); +#319144 = DIRECTION('',(-1.,0.,0.)); +#319145 = ORIENTED_EDGE('',*,*,#319146,.F.); +#319146 = EDGE_CURVE('',#319147,#319139,#319149,.T.); +#319147 = VERTEX_POINT('',#319148); +#319148 = CARTESIAN_POINT('',(124.957099,-89.100735,1.51)); +#319149 = LINE('',#319150,#319151); +#319150 = CARTESIAN_POINT('',(124.957099,-89.100735,1.51)); +#319151 = VECTOR('',#319152,1.); +#319152 = DIRECTION('',(0.,0.,1.)); +#319153 = ORIENTED_EDGE('',*,*,#319154,.F.); +#319154 = EDGE_CURVE('',#319116,#319147,#319155,.T.); +#319155 = LINE('',#319156,#319157); +#319156 = CARTESIAN_POINT('',(125.339313,-89.100735,1.51)); +#319157 = VECTOR('',#319158,1.); +#319158 = DIRECTION('',(-1.,0.,0.)); +#319159 = PLANE('',#319160); +#319160 = AXIS2_PLACEMENT_3D('',#319161,#319162,#319163); +#319161 = CARTESIAN_POINT('',(125.339313,-89.100735,1.51)); +#319162 = DIRECTION('',(0.,-1.,0.)); +#319163 = DIRECTION('',(-1.,0.,0.)); +#319164 = ADVANCED_FACE('',(#319165),#319192,.T.); +#319165 = FACE_BOUND('',#319166,.T.); +#319166 = EDGE_LOOP('',(#319167,#319168,#319177,#319185)); +#319167 = ORIENTED_EDGE('',*,*,#319146,.T.); +#319168 = ORIENTED_EDGE('',*,*,#319169,.T.); +#319169 = EDGE_CURVE('',#319139,#319170,#319172,.T.); +#319170 = VERTEX_POINT('',#319171); +#319171 = CARTESIAN_POINT('',(124.421753,-89.243857,1.545)); +#319172 = CIRCLE('',#319173,0.29995931201); +#319173 = AXIS2_PLACEMENT_3D('',#319174,#319175,#319176); +#319174 = CARTESIAN_POINT('',(124.65974605127,-89.06127853355,1.545)); +#319175 = DIRECTION('',(-0.,0.,-1.)); +#319176 = DIRECTION('',(0.991310943927,-0.131539395052,-0.)); +#319177 = ORIENTED_EDGE('',*,*,#319178,.F.); +#319178 = EDGE_CURVE('',#319179,#319170,#319181,.T.); +#319179 = VERTEX_POINT('',#319180); +#319180 = CARTESIAN_POINT('',(124.421753,-89.243857,1.51)); +#319181 = LINE('',#319182,#319183); +#319182 = CARTESIAN_POINT('',(124.421753,-89.243857,1.51)); +#319183 = VECTOR('',#319184,1.); +#319184 = DIRECTION('',(0.,0.,1.)); +#319185 = ORIENTED_EDGE('',*,*,#319186,.F.); +#319186 = EDGE_CURVE('',#319147,#319179,#319187,.T.); +#319187 = CIRCLE('',#319188,0.29995931201); +#319188 = AXIS2_PLACEMENT_3D('',#319189,#319190,#319191); +#319189 = CARTESIAN_POINT('',(124.65974605127,-89.06127853355,1.51)); +#319190 = DIRECTION('',(-0.,0.,-1.)); +#319191 = DIRECTION('',(0.991310943927,-0.131539395052,-0.)); +#319192 = CYLINDRICAL_SURFACE('',#319193,0.29995931201); +#319193 = AXIS2_PLACEMENT_3D('',#319194,#319195,#319196); +#319194 = CARTESIAN_POINT('',(124.65974605127,-89.06127853355,1.51)); +#319195 = DIRECTION('',(-0.,0.,-1.)); +#319196 = DIRECTION('',(0.991310943927,-0.131539395052,-0.)); +#319197 = ADVANCED_FACE('',(#319198),#319223,.T.); +#319198 = FACE_BOUND('',#319199,.T.); +#319199 = EDGE_LOOP('',(#319200,#319201,#319209,#319217)); +#319200 = ORIENTED_EDGE('',*,*,#319178,.T.); +#319201 = ORIENTED_EDGE('',*,*,#319202,.T.); +#319202 = EDGE_CURVE('',#319170,#319203,#319205,.T.); +#319203 = VERTEX_POINT('',#319204); +#319204 = CARTESIAN_POINT('',(124.382595,-89.176034,1.545)); +#319205 = LINE('',#319206,#319207); +#319206 = CARTESIAN_POINT('',(124.421753,-89.243857,1.545)); +#319207 = VECTOR('',#319208,1.); +#319208 = DIRECTION('',(-0.500003569146,0.866023343127,0.)); +#319209 = ORIENTED_EDGE('',*,*,#319210,.F.); +#319210 = EDGE_CURVE('',#319211,#319203,#319213,.T.); +#319211 = VERTEX_POINT('',#319212); +#319212 = CARTESIAN_POINT('',(124.382595,-89.176034,1.51)); +#319213 = LINE('',#319214,#319215); +#319214 = CARTESIAN_POINT('',(124.382595,-89.176034,1.51)); +#319215 = VECTOR('',#319216,1.); +#319216 = DIRECTION('',(0.,0.,1.)); +#319217 = ORIENTED_EDGE('',*,*,#319218,.F.); +#319218 = EDGE_CURVE('',#319179,#319211,#319219,.T.); +#319219 = LINE('',#319220,#319221); +#319220 = CARTESIAN_POINT('',(124.421753,-89.243857,1.51)); +#319221 = VECTOR('',#319222,1.); +#319222 = DIRECTION('',(-0.500003569146,0.866023343127,0.)); +#319223 = PLANE('',#319224); +#319224 = AXIS2_PLACEMENT_3D('',#319225,#319226,#319227); +#319225 = CARTESIAN_POINT('',(124.421753,-89.243857,1.51)); +#319226 = DIRECTION('',(-0.866023343127,-0.500003569146,0.)); +#319227 = DIRECTION('',(-0.500003569146,0.866023343127,0.)); +#319228 = ADVANCED_FACE('',(#319229),#319256,.T.); +#319229 = FACE_BOUND('',#319230,.T.); +#319230 = EDGE_LOOP('',(#319231,#319232,#319241,#319249)); +#319231 = ORIENTED_EDGE('',*,*,#319210,.T.); +#319232 = ORIENTED_EDGE('',*,*,#319233,.T.); +#319233 = EDGE_CURVE('',#319203,#319234,#319236,.T.); +#319234 = VERTEX_POINT('',#319235); +#319235 = CARTESIAN_POINT('',(124.897765,-88.878601,1.545)); +#319236 = CIRCLE('',#319237,0.299999913311); +#319237 = AXIS2_PLACEMENT_3D('',#319238,#319239,#319240); +#319238 = CARTESIAN_POINT('',(124.65975877822,-89.061229,1.545)); +#319239 = DIRECTION('',(0.,0.,-1.)); +#319240 = DIRECTION('',(-0.923879527727,-0.382683443915,-0.)); +#319241 = ORIENTED_EDGE('',*,*,#319242,.F.); +#319242 = EDGE_CURVE('',#319243,#319234,#319245,.T.); +#319243 = VERTEX_POINT('',#319244); +#319244 = CARTESIAN_POINT('',(124.897765,-88.878601,1.51)); +#319245 = LINE('',#319246,#319247); +#319246 = CARTESIAN_POINT('',(124.897765,-88.878601,1.51)); +#319247 = VECTOR('',#319248,1.); +#319248 = DIRECTION('',(0.,0.,1.)); +#319249 = ORIENTED_EDGE('',*,*,#319250,.F.); +#319250 = EDGE_CURVE('',#319211,#319243,#319251,.T.); +#319251 = CIRCLE('',#319252,0.299999913311); +#319252 = AXIS2_PLACEMENT_3D('',#319253,#319254,#319255); +#319253 = CARTESIAN_POINT('',(124.65975877822,-89.061229,1.51)); +#319254 = DIRECTION('',(0.,0.,-1.)); +#319255 = DIRECTION('',(-0.923879527727,-0.382683443915,-0.)); +#319256 = CYLINDRICAL_SURFACE('',#319257,0.299999913311); +#319257 = AXIS2_PLACEMENT_3D('',#319258,#319259,#319260); +#319258 = CARTESIAN_POINT('',(124.65975877822,-89.061229,1.51)); +#319259 = DIRECTION('',(0.,0.,-1.)); +#319260 = DIRECTION('',(-0.923879527727,-0.382683443915,-0.)); +#319261 = ADVANCED_FACE('',(#319262),#319278,.T.); +#319262 = FACE_BOUND('',#319263,.T.); +#319263 = EDGE_LOOP('',(#319264,#319265,#319271,#319272)); +#319264 = ORIENTED_EDGE('',*,*,#319242,.T.); +#319265 = ORIENTED_EDGE('',*,*,#319266,.T.); +#319266 = EDGE_CURVE('',#319234,#318972,#319267,.T.); +#319267 = LINE('',#319268,#319269); +#319268 = CARTESIAN_POINT('',(124.897765,-88.878601,1.545)); +#319269 = VECTOR('',#319270,1.); +#319270 = DIRECTION('',(0.499997920671,-0.866026604282,0.)); +#319271 = ORIENTED_EDGE('',*,*,#318969,.F.); +#319272 = ORIENTED_EDGE('',*,*,#319273,.F.); +#319273 = EDGE_CURVE('',#319243,#318970,#319274,.T.); +#319274 = LINE('',#319275,#319276); +#319275 = CARTESIAN_POINT('',(124.897765,-88.878601,1.51)); +#319276 = VECTOR('',#319277,1.); +#319277 = DIRECTION('',(0.499997920671,-0.866026604282,0.)); +#319278 = PLANE('',#319279); +#319279 = AXIS2_PLACEMENT_3D('',#319280,#319281,#319282); +#319280 = CARTESIAN_POINT('',(124.897765,-88.878601,1.51)); +#319281 = DIRECTION('',(0.866026604282,0.499997920671,-0.)); +#319282 = DIRECTION('',(0.499997920671,-0.866026604282,0.)); +#319283 = ADVANCED_FACE('',(#319284),#319311,.F.); +#319284 = FACE_BOUND('',#319285,.T.); +#319285 = EDGE_LOOP('',(#319286,#319296,#319303,#319304)); +#319286 = ORIENTED_EDGE('',*,*,#319287,.T.); +#319287 = EDGE_CURVE('',#319288,#319290,#319292,.T.); +#319288 = VERTEX_POINT('',#319289); +#319289 = CARTESIAN_POINT('',(124.797014,-89.061229,1.51)); +#319290 = VERTEX_POINT('',#319291); +#319291 = CARTESIAN_POINT('',(124.797014,-89.061229,1.545)); +#319292 = LINE('',#319293,#319294); +#319293 = CARTESIAN_POINT('',(124.797014,-89.061229,1.51)); +#319294 = VECTOR('',#319295,1.); +#319295 = DIRECTION('',(0.,0.,1.)); +#319296 = ORIENTED_EDGE('',*,*,#319297,.T.); +#319297 = EDGE_CURVE('',#319290,#319290,#319298,.T.); +#319298 = CIRCLE('',#319299,0.137255); +#319299 = AXIS2_PLACEMENT_3D('',#319300,#319301,#319302); +#319300 = CARTESIAN_POINT('',(124.659759,-89.061229,1.545)); +#319301 = DIRECTION('',(0.,0.,1.)); +#319302 = DIRECTION('',(1.,0.,-0.)); +#319303 = ORIENTED_EDGE('',*,*,#319287,.F.); +#319304 = ORIENTED_EDGE('',*,*,#319305,.F.); +#319305 = EDGE_CURVE('',#319288,#319288,#319306,.T.); +#319306 = CIRCLE('',#319307,0.137255); +#319307 = AXIS2_PLACEMENT_3D('',#319308,#319309,#319310); +#319308 = CARTESIAN_POINT('',(124.659759,-89.061229,1.51)); +#319309 = DIRECTION('',(0.,0.,1.)); +#319310 = DIRECTION('',(1.,0.,-0.)); +#319311 = CYLINDRICAL_SURFACE('',#319312,0.137255); +#319312 = AXIS2_PLACEMENT_3D('',#319313,#319314,#319315); +#319313 = CARTESIAN_POINT('',(124.659759,-89.061229,1.51)); +#319314 = DIRECTION('',(-0.,-0.,-1.)); +#319315 = DIRECTION('',(1.,0.,-0.)); +#319316 = ADVANCED_FACE('',(#319317,#319329),#319332,.F.); +#319317 = FACE_BOUND('',#319318,.T.); +#319318 = EDGE_LOOP('',(#319319,#319320,#319321,#319322,#319323,#319324, + #319325,#319326,#319327,#319328)); +#319319 = ORIENTED_EDGE('',*,*,#318995,.T.); +#319320 = ORIENTED_EDGE('',*,*,#319027,.T.); +#319321 = ORIENTED_EDGE('',*,*,#319059,.T.); +#319322 = ORIENTED_EDGE('',*,*,#319091,.T.); +#319323 = ORIENTED_EDGE('',*,*,#319123,.T.); +#319324 = ORIENTED_EDGE('',*,*,#319154,.T.); +#319325 = ORIENTED_EDGE('',*,*,#319186,.T.); +#319326 = ORIENTED_EDGE('',*,*,#319218,.T.); +#319327 = ORIENTED_EDGE('',*,*,#319250,.T.); +#319328 = ORIENTED_EDGE('',*,*,#319273,.T.); +#319329 = FACE_BOUND('',#319330,.T.); +#319330 = EDGE_LOOP('',(#319331)); +#319331 = ORIENTED_EDGE('',*,*,#319305,.T.); +#319332 = PLANE('',#319333); +#319333 = AXIS2_PLACEMENT_3D('',#319334,#319335,#319336); +#319334 = CARTESIAN_POINT('',(0.,0.,1.51)); +#319335 = DIRECTION('',(0.,0.,1.)); +#319336 = DIRECTION('',(1.,0.,-0.)); +#319337 = ADVANCED_FACE('',(#319338,#319350),#319353,.T.); +#319338 = FACE_BOUND('',#319339,.F.); +#319339 = EDGE_LOOP('',(#319340,#319341,#319342,#319343,#319344,#319345, + #319346,#319347,#319348,#319349)); +#319340 = ORIENTED_EDGE('',*,*,#318979,.T.); +#319341 = ORIENTED_EDGE('',*,*,#319010,.T.); +#319342 = ORIENTED_EDGE('',*,*,#319043,.T.); +#319343 = ORIENTED_EDGE('',*,*,#319074,.T.); +#319344 = ORIENTED_EDGE('',*,*,#319107,.T.); +#319345 = ORIENTED_EDGE('',*,*,#319138,.T.); +#319346 = ORIENTED_EDGE('',*,*,#319169,.T.); +#319347 = ORIENTED_EDGE('',*,*,#319202,.T.); +#319348 = ORIENTED_EDGE('',*,*,#319233,.T.); +#319349 = ORIENTED_EDGE('',*,*,#319266,.T.); +#319350 = FACE_BOUND('',#319351,.F.); +#319351 = EDGE_LOOP('',(#319352)); +#319352 = ORIENTED_EDGE('',*,*,#319297,.T.); +#319353 = PLANE('',#319354); +#319354 = AXIS2_PLACEMENT_3D('',#319355,#319356,#319357); +#319355 = CARTESIAN_POINT('',(0.,0.,1.545)); +#319356 = DIRECTION('',(0.,0.,1.)); +#319357 = DIRECTION('',(1.,0.,-0.)); +#319358 = MANIFOLD_SOLID_BREP('',#319359); +#319359 = CLOSED_SHELL('',(#319360,#319402,#319433,#319464,#319495, + #319528,#319559,#319590,#319623,#319654,#319685,#319718,#319749, + #319780,#319811,#319842,#319873,#319895,#319928,#319956)); +#319360 = ADVANCED_FACE('',(#319361),#319397,.T.); +#319361 = FACE_BOUND('',#319362,.F.); +#319362 = EDGE_LOOP('',(#319363,#319373,#319382,#319390)); +#319363 = ORIENTED_EDGE('',*,*,#319364,.T.); +#319364 = EDGE_CURVE('',#319365,#319367,#319369,.T.); +#319365 = VERTEX_POINT('',#319366); +#319366 = CARTESIAN_POINT('',(147.614443,-128.816853,0.)); +#319367 = VERTEX_POINT('',#319368); +#319368 = CARTESIAN_POINT('',(147.614443,-128.816853,-3.5E-02)); +#319369 = LINE('',#319370,#319371); +#319370 = CARTESIAN_POINT('',(147.614443,-128.816853,0.)); +#319371 = VECTOR('',#319372,1.); +#319372 = DIRECTION('',(0.,0.,-1.)); +#319373 = ORIENTED_EDGE('',*,*,#319374,.T.); +#319374 = EDGE_CURVE('',#319367,#319375,#319377,.T.); +#319375 = VERTEX_POINT('',#319376); +#319376 = CARTESIAN_POINT('',(147.768079,-128.880491,-3.5E-02)); +#319377 = CIRCLE('',#319378,0.100000590676); +#319378 = AXIS2_PLACEMENT_3D('',#319379,#319380,#319381); +#319379 = CARTESIAN_POINT('',(147.67,-128.9000006871,-3.5E-02)); +#319380 = DIRECTION('',(0.,0.,-1.)); +#319381 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#319382 = ORIENTED_EDGE('',*,*,#319383,.F.); +#319383 = EDGE_CURVE('',#319384,#319375,#319386,.T.); +#319384 = VERTEX_POINT('',#319385); +#319385 = CARTESIAN_POINT('',(147.768079,-128.880491,0.)); +#319386 = LINE('',#319387,#319388); +#319387 = CARTESIAN_POINT('',(147.768079,-128.880491,0.)); +#319388 = VECTOR('',#319389,1.); +#319389 = DIRECTION('',(0.,0.,-1.)); +#319390 = ORIENTED_EDGE('',*,*,#319391,.F.); +#319391 = EDGE_CURVE('',#319365,#319384,#319392,.T.); +#319392 = CIRCLE('',#319393,0.100000590676); +#319393 = AXIS2_PLACEMENT_3D('',#319394,#319395,#319396); +#319394 = CARTESIAN_POINT('',(147.67,-128.9000006871,0.)); +#319395 = DIRECTION('',(0.,0.,-1.)); +#319396 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#319397 = CYLINDRICAL_SURFACE('',#319398,0.100000590676); +#319398 = AXIS2_PLACEMENT_3D('',#319399,#319400,#319401); +#319399 = CARTESIAN_POINT('',(147.67,-128.9000006871,0.)); +#319400 = DIRECTION('',(-0.,-0.,1.)); +#319401 = DIRECTION('',(-0.555566718399,0.831471960686,0.)); +#319402 = ADVANCED_FACE('',(#319403),#319428,.F.); +#319403 = FACE_BOUND('',#319404,.F.); +#319404 = EDGE_LOOP('',(#319405,#319406,#319414,#319422)); +#319405 = ORIENTED_EDGE('',*,*,#319383,.T.); +#319406 = ORIENTED_EDGE('',*,*,#319407,.T.); +#319407 = EDGE_CURVE('',#319375,#319408,#319410,.T.); +#319408 = VERTEX_POINT('',#319409); +#319409 = CARTESIAN_POINT('',(147.77,-129.038578,-3.5E-02)); +#319410 = LINE('',#319411,#319412); +#319411 = CARTESIAN_POINT('',(147.768079,-128.880491,-3.5E-02)); +#319412 = VECTOR('',#319413,1.); +#319413 = DIRECTION('',(1.215063976438E-02,-0.999926178252,0.)); +#319414 = ORIENTED_EDGE('',*,*,#319415,.F.); +#319415 = EDGE_CURVE('',#319416,#319408,#319418,.T.); +#319416 = VERTEX_POINT('',#319417); +#319417 = CARTESIAN_POINT('',(147.77,-129.038578,0.)); +#319418 = LINE('',#319419,#319420); +#319419 = CARTESIAN_POINT('',(147.77,-129.038578,0.)); +#319420 = VECTOR('',#319421,1.); +#319421 = DIRECTION('',(0.,0.,-1.)); +#319422 = ORIENTED_EDGE('',*,*,#319423,.F.); +#319423 = EDGE_CURVE('',#319384,#319416,#319424,.T.); +#319424 = LINE('',#319425,#319426); +#319425 = CARTESIAN_POINT('',(147.768079,-128.880491,0.)); +#319426 = VECTOR('',#319427,1.); +#319427 = DIRECTION('',(1.215063976438E-02,-0.999926178252,0.)); +#319428 = PLANE('',#319429); +#319429 = AXIS2_PLACEMENT_3D('',#319430,#319431,#319432); +#319430 = CARTESIAN_POINT('',(147.768079,-128.880491,0.)); +#319431 = DIRECTION('',(-0.999926178252,-1.215063976438E-02,-0.)); +#319432 = DIRECTION('',(1.215063976438E-02,-0.999926178252,0.)); +#319433 = ADVANCED_FACE('',(#319434),#319459,.F.); +#319434 = FACE_BOUND('',#319435,.F.); +#319435 = EDGE_LOOP('',(#319436,#319437,#319445,#319453)); +#319436 = ORIENTED_EDGE('',*,*,#319415,.T.); +#319437 = ORIENTED_EDGE('',*,*,#319438,.T.); +#319438 = EDGE_CURVE('',#319408,#319439,#319441,.T.); +#319439 = VERTEX_POINT('',#319440); +#319440 = CARTESIAN_POINT('',(149.221921,-130.490499,-3.5E-02)); +#319441 = LINE('',#319442,#319443); +#319442 = CARTESIAN_POINT('',(147.77,-129.038578,-3.5E-02)); +#319443 = VECTOR('',#319444,1.); +#319444 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#319445 = ORIENTED_EDGE('',*,*,#319446,.F.); +#319446 = EDGE_CURVE('',#319447,#319439,#319449,.T.); +#319447 = VERTEX_POINT('',#319448); +#319448 = CARTESIAN_POINT('',(149.221921,-130.490499,0.)); +#319449 = LINE('',#319450,#319451); +#319450 = CARTESIAN_POINT('',(149.221921,-130.490499,0.)); +#319451 = VECTOR('',#319452,1.); +#319452 = DIRECTION('',(0.,0.,-1.)); +#319453 = ORIENTED_EDGE('',*,*,#319454,.F.); +#319454 = EDGE_CURVE('',#319416,#319447,#319455,.T.); +#319455 = LINE('',#319456,#319457); +#319456 = CARTESIAN_POINT('',(147.77,-129.038578,0.)); +#319457 = VECTOR('',#319458,1.); +#319458 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#319459 = PLANE('',#319460); +#319460 = AXIS2_PLACEMENT_3D('',#319461,#319462,#319463); +#319461 = CARTESIAN_POINT('',(147.77,-129.038578,0.)); +#319462 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#319463 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#319464 = ADVANCED_FACE('',(#319465),#319490,.F.); +#319465 = FACE_BOUND('',#319466,.F.); +#319466 = EDGE_LOOP('',(#319467,#319468,#319476,#319484)); +#319467 = ORIENTED_EDGE('',*,*,#319446,.T.); +#319468 = ORIENTED_EDGE('',*,*,#319469,.T.); +#319469 = EDGE_CURVE('',#319439,#319470,#319472,.T.); +#319470 = VERTEX_POINT('',#319471); +#319471 = CARTESIAN_POINT('',(149.235195,-130.482836,-3.5E-02)); +#319472 = LINE('',#319473,#319474); +#319473 = CARTESIAN_POINT('',(149.221921,-130.490499,-3.5E-02)); +#319474 = VECTOR('',#319475,1.); +#319475 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#319476 = ORIENTED_EDGE('',*,*,#319477,.F.); +#319477 = EDGE_CURVE('',#319478,#319470,#319480,.T.); +#319478 = VERTEX_POINT('',#319479); +#319479 = CARTESIAN_POINT('',(149.235195,-130.482836,0.)); +#319480 = LINE('',#319481,#319482); +#319481 = CARTESIAN_POINT('',(149.235195,-130.482836,0.)); +#319482 = VECTOR('',#319483,1.); +#319483 = DIRECTION('',(0.,0.,-1.)); +#319484 = ORIENTED_EDGE('',*,*,#319485,.F.); +#319485 = EDGE_CURVE('',#319447,#319478,#319486,.T.); +#319486 = LINE('',#319487,#319488); +#319487 = CARTESIAN_POINT('',(149.221921,-130.490499,0.)); +#319488 = VECTOR('',#319489,1.); +#319489 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#319490 = PLANE('',#319491); +#319491 = AXIS2_PLACEMENT_3D('',#319492,#319493,#319494); +#319492 = CARTESIAN_POINT('',(149.221921,-130.490499,0.)); +#319493 = DIRECTION('',(0.499963423546,-0.86604652018,0.)); +#319494 = DIRECTION('',(0.86604652018,0.499963423546,0.)); +#319495 = ADVANCED_FACE('',(#319496),#319523,.T.); +#319496 = FACE_BOUND('',#319497,.F.); +#319497 = EDGE_LOOP('',(#319498,#319499,#319508,#319516)); +#319498 = ORIENTED_EDGE('',*,*,#319477,.T.); +#319499 = ORIENTED_EDGE('',*,*,#319500,.T.); +#319500 = EDGE_CURVE('',#319470,#319501,#319503,.T.); +#319501 = VERTEX_POINT('',#319502); +#319502 = CARTESIAN_POINT('',(149.627164,-130.874805,-3.5E-02)); +#319503 = CIRCLE('',#319504,0.300000357606); +#319504 = AXIS2_PLACEMENT_3D('',#319505,#319506,#319507); +#319505 = CARTESIAN_POINT('',(149.34999955764,-130.7600004423,-3.5E-02) + ); +#319506 = DIRECTION('',(0.,0.,-1.)); +#319507 = DIRECTION('',(-0.382681402637,0.92388037325,0.)); +#319508 = ORIENTED_EDGE('',*,*,#319509,.F.); +#319509 = EDGE_CURVE('',#319510,#319501,#319512,.T.); +#319510 = VERTEX_POINT('',#319511); +#319511 = CARTESIAN_POINT('',(149.627164,-130.874805,0.)); +#319512 = LINE('',#319513,#319514); +#319513 = CARTESIAN_POINT('',(149.627164,-130.874805,0.)); +#319514 = VECTOR('',#319515,1.); +#319515 = DIRECTION('',(0.,0.,-1.)); +#319516 = ORIENTED_EDGE('',*,*,#319517,.F.); +#319517 = EDGE_CURVE('',#319478,#319510,#319518,.T.); +#319518 = CIRCLE('',#319519,0.300000357606); +#319519 = AXIS2_PLACEMENT_3D('',#319520,#319521,#319522); +#319520 = CARTESIAN_POINT('',(149.34999955764,-130.7600004423,0.)); +#319521 = DIRECTION('',(0.,0.,-1.)); +#319522 = DIRECTION('',(-0.382681402637,0.92388037325,0.)); +#319523 = CYLINDRICAL_SURFACE('',#319524,0.300000357606); +#319524 = AXIS2_PLACEMENT_3D('',#319525,#319526,#319527); +#319525 = CARTESIAN_POINT('',(149.34999955764,-130.7600004423,0.)); +#319526 = DIRECTION('',(-0.,-0.,1.)); +#319527 = DIRECTION('',(-0.382681402637,0.92388037325,0.)); +#319528 = ADVANCED_FACE('',(#319529),#319554,.F.); +#319529 = FACE_BOUND('',#319530,.F.); +#319530 = EDGE_LOOP('',(#319531,#319532,#319540,#319548)); +#319531 = ORIENTED_EDGE('',*,*,#319509,.T.); +#319532 = ORIENTED_EDGE('',*,*,#319533,.T.); +#319533 = EDGE_CURVE('',#319501,#319534,#319536,.T.); +#319534 = VERTEX_POINT('',#319535); +#319535 = CARTESIAN_POINT('',(149.6195,-130.888078,-3.5E-02)); +#319536 = LINE('',#319537,#319538); +#319537 = CARTESIAN_POINT('',(149.627164,-130.874805,-3.5E-02)); +#319538 = VECTOR('',#319539,1.); +#319539 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#319540 = ORIENTED_EDGE('',*,*,#319541,.F.); +#319541 = EDGE_CURVE('',#319542,#319534,#319544,.T.); +#319542 = VERTEX_POINT('',#319543); +#319543 = CARTESIAN_POINT('',(149.6195,-130.888078,0.)); +#319544 = LINE('',#319545,#319546); +#319545 = CARTESIAN_POINT('',(149.6195,-130.888078,0.)); +#319546 = VECTOR('',#319547,1.); +#319547 = DIRECTION('',(0.,0.,-1.)); +#319548 = ORIENTED_EDGE('',*,*,#319549,.F.); +#319549 = EDGE_CURVE('',#319510,#319542,#319550,.T.); +#319550 = LINE('',#319551,#319552); +#319551 = CARTESIAN_POINT('',(149.627164,-130.874805,0.)); +#319552 = VECTOR('',#319553,1.); +#319553 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#319554 = PLANE('',#319555); +#319555 = AXIS2_PLACEMENT_3D('',#319556,#319557,#319558); +#319556 = CARTESIAN_POINT('',(149.627164,-130.874805,0.)); +#319557 = DIRECTION('',(-0.86600195708,0.500040608684,0.)); +#319558 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#319559 = ADVANCED_FACE('',(#319560),#319585,.F.); +#319560 = FACE_BOUND('',#319561,.F.); +#319561 = EDGE_LOOP('',(#319562,#319563,#319571,#319579)); +#319562 = ORIENTED_EDGE('',*,*,#319541,.T.); +#319563 = ORIENTED_EDGE('',*,*,#319564,.T.); +#319564 = EDGE_CURVE('',#319534,#319565,#319567,.T.); +#319565 = VERTEX_POINT('',#319566); +#319566 = CARTESIAN_POINT('',(150.333147,-131.604442,-3.5E-02)); +#319567 = LINE('',#319568,#319569); +#319568 = CARTESIAN_POINT('',(149.6195,-130.888078,-3.5E-02)); +#319569 = VECTOR('',#319570,1.); +#319570 = DIRECTION('',(0.705762014757,-0.708448995007,0.)); +#319571 = ORIENTED_EDGE('',*,*,#319572,.F.); +#319572 = EDGE_CURVE('',#319573,#319565,#319575,.T.); +#319573 = VERTEX_POINT('',#319574); +#319574 = CARTESIAN_POINT('',(150.333147,-131.604442,0.)); +#319575 = LINE('',#319576,#319577); +#319576 = CARTESIAN_POINT('',(150.333147,-131.604442,0.)); +#319577 = VECTOR('',#319578,1.); +#319578 = DIRECTION('',(0.,0.,-1.)); +#319579 = ORIENTED_EDGE('',*,*,#319580,.F.); +#319580 = EDGE_CURVE('',#319542,#319573,#319581,.T.); +#319581 = LINE('',#319582,#319583); +#319582 = CARTESIAN_POINT('',(149.6195,-130.888078,0.)); +#319583 = VECTOR('',#319584,1.); +#319584 = DIRECTION('',(0.705762014757,-0.708448995007,0.)); +#319585 = PLANE('',#319586); +#319586 = AXIS2_PLACEMENT_3D('',#319587,#319588,#319589); +#319587 = CARTESIAN_POINT('',(149.6195,-130.888078,0.)); +#319588 = DIRECTION('',(-0.708448995007,-0.705762014757,-0.)); +#319589 = DIRECTION('',(0.705762014757,-0.708448995007,0.)); +#319590 = ADVANCED_FACE('',(#319591),#319618,.T.); +#319591 = FACE_BOUND('',#319592,.F.); +#319592 = EDGE_LOOP('',(#319593,#319594,#319603,#319611)); +#319593 = ORIENTED_EDGE('',*,*,#319572,.T.); +#319594 = ORIENTED_EDGE('',*,*,#319595,.T.); +#319595 = EDGE_CURVE('',#319565,#319596,#319598,.T.); +#319596 = VERTEX_POINT('',#319597); +#319597 = CARTESIAN_POINT('',(150.194442,-131.743147,-3.5E-02)); +#319598 = CIRCLE('',#319599,0.10000071281); +#319599 = AXIS2_PLACEMENT_3D('',#319600,#319601,#319602); +#319600 = CARTESIAN_POINT('',(150.2499995,-131.6599995,-3.5E-02)); +#319601 = DIRECTION('',(0.,0.,-1.)); +#319602 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#319603 = ORIENTED_EDGE('',*,*,#319604,.F.); +#319604 = EDGE_CURVE('',#319605,#319596,#319607,.T.); +#319605 = VERTEX_POINT('',#319606); +#319606 = CARTESIAN_POINT('',(150.194442,-131.743147,0.)); +#319607 = LINE('',#319608,#319609); +#319608 = CARTESIAN_POINT('',(150.194442,-131.743147,0.)); +#319609 = VECTOR('',#319610,1.); +#319610 = DIRECTION('',(0.,0.,-1.)); +#319611 = ORIENTED_EDGE('',*,*,#319612,.F.); +#319612 = EDGE_CURVE('',#319573,#319605,#319613,.T.); +#319613 = CIRCLE('',#319614,0.10000071281); +#319614 = AXIS2_PLACEMENT_3D('',#319615,#319616,#319617); +#319615 = CARTESIAN_POINT('',(150.2499995,-131.6599995,0.)); +#319616 = DIRECTION('',(0.,0.,-1.)); +#319617 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#319618 = CYLINDRICAL_SURFACE('',#319619,0.10000071281); +#319619 = AXIS2_PLACEMENT_3D('',#319620,#319621,#319622); +#319620 = CARTESIAN_POINT('',(150.2499995,-131.6599995,0.)); +#319621 = DIRECTION('',(-0.,-0.,1.)); +#319622 = DIRECTION('',(0.831469073206,0.555571039834,0.)); +#319623 = ADVANCED_FACE('',(#319624),#319649,.F.); +#319624 = FACE_BOUND('',#319625,.F.); +#319625 = EDGE_LOOP('',(#319626,#319627,#319635,#319643)); +#319626 = ORIENTED_EDGE('',*,*,#319604,.T.); +#319627 = ORIENTED_EDGE('',*,*,#319628,.T.); +#319628 = EDGE_CURVE('',#319596,#319629,#319631,.T.); +#319629 = VERTEX_POINT('',#319630); +#319630 = CARTESIAN_POINT('',(149.478078,-131.0295,-3.5E-02)); +#319631 = LINE('',#319632,#319633); +#319632 = CARTESIAN_POINT('',(150.194442,-131.743147,-3.5E-02)); +#319633 = VECTOR('',#319634,1.); +#319634 = DIRECTION('',(-0.708448995007,0.705762014757,0.)); +#319635 = ORIENTED_EDGE('',*,*,#319636,.F.); +#319636 = EDGE_CURVE('',#319637,#319629,#319639,.T.); +#319637 = VERTEX_POINT('',#319638); +#319638 = CARTESIAN_POINT('',(149.478078,-131.0295,0.)); +#319639 = LINE('',#319640,#319641); +#319640 = CARTESIAN_POINT('',(149.478078,-131.0295,0.)); +#319641 = VECTOR('',#319642,1.); +#319642 = DIRECTION('',(0.,0.,-1.)); +#319643 = ORIENTED_EDGE('',*,*,#319644,.F.); +#319644 = EDGE_CURVE('',#319605,#319637,#319645,.T.); +#319645 = LINE('',#319646,#319647); +#319646 = CARTESIAN_POINT('',(150.194442,-131.743147,0.)); +#319647 = VECTOR('',#319648,1.); +#319648 = DIRECTION('',(-0.708448995007,0.705762014757,0.)); +#319649 = PLANE('',#319650); +#319650 = AXIS2_PLACEMENT_3D('',#319651,#319652,#319653); +#319651 = CARTESIAN_POINT('',(150.194442,-131.743147,0.)); +#319652 = DIRECTION('',(0.705762014757,0.708448995007,0.)); +#319653 = DIRECTION('',(-0.708448995007,0.705762014757,0.)); +#319654 = ADVANCED_FACE('',(#319655),#319680,.F.); +#319655 = FACE_BOUND('',#319656,.F.); +#319656 = EDGE_LOOP('',(#319657,#319658,#319666,#319674)); +#319657 = ORIENTED_EDGE('',*,*,#319636,.T.); +#319658 = ORIENTED_EDGE('',*,*,#319659,.T.); +#319659 = EDGE_CURVE('',#319629,#319660,#319662,.T.); +#319660 = VERTEX_POINT('',#319661); +#319661 = CARTESIAN_POINT('',(149.464805,-131.037164,-3.5E-02)); +#319662 = LINE('',#319663,#319664); +#319663 = CARTESIAN_POINT('',(149.478078,-131.0295,-3.5E-02)); +#319664 = VECTOR('',#319665,1.); +#319665 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#319666 = ORIENTED_EDGE('',*,*,#319667,.F.); +#319667 = EDGE_CURVE('',#319668,#319660,#319670,.T.); +#319668 = VERTEX_POINT('',#319669); +#319669 = CARTESIAN_POINT('',(149.464805,-131.037164,0.)); +#319670 = LINE('',#319671,#319672); +#319671 = CARTESIAN_POINT('',(149.464805,-131.037164,0.)); +#319672 = VECTOR('',#319673,1.); +#319673 = DIRECTION('',(0.,0.,-1.)); +#319674 = ORIENTED_EDGE('',*,*,#319675,.F.); +#319675 = EDGE_CURVE('',#319637,#319668,#319676,.T.); +#319676 = LINE('',#319677,#319678); +#319677 = CARTESIAN_POINT('',(149.478078,-131.0295,0.)); +#319678 = VECTOR('',#319679,1.); +#319679 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#319680 = PLANE('',#319681); +#319681 = AXIS2_PLACEMENT_3D('',#319682,#319683,#319684); +#319682 = CARTESIAN_POINT('',(149.478078,-131.0295,0.)); +#319683 = DIRECTION('',(-0.500040608683,0.866001957081,0.)); +#319684 = DIRECTION('',(-0.866001957081,-0.500040608683,0.)); +#319685 = ADVANCED_FACE('',(#319686),#319713,.T.); +#319686 = FACE_BOUND('',#319687,.F.); +#319687 = EDGE_LOOP('',(#319688,#319689,#319698,#319706)); +#319688 = ORIENTED_EDGE('',*,*,#319667,.T.); +#319689 = ORIENTED_EDGE('',*,*,#319690,.T.); +#319690 = EDGE_CURVE('',#319660,#319691,#319693,.T.); +#319691 = VERTEX_POINT('',#319692); +#319692 = CARTESIAN_POINT('',(149.072836,-130.645195,-3.5E-02)); +#319693 = CIRCLE('',#319694,0.300000357606); +#319694 = AXIS2_PLACEMENT_3D('',#319695,#319696,#319697); +#319695 = CARTESIAN_POINT('',(149.35000044236,-130.7599995576,-3.5E-02) + ); +#319696 = DIRECTION('',(0.,0.,-1.)); +#319697 = DIRECTION('',(0.382681402637,-0.92388037325,0.)); +#319698 = ORIENTED_EDGE('',*,*,#319699,.F.); +#319699 = EDGE_CURVE('',#319700,#319691,#319702,.T.); +#319700 = VERTEX_POINT('',#319701); +#319701 = CARTESIAN_POINT('',(149.072836,-130.645195,0.)); +#319702 = LINE('',#319703,#319704); +#319703 = CARTESIAN_POINT('',(149.072836,-130.645195,0.)); +#319704 = VECTOR('',#319705,1.); +#319705 = DIRECTION('',(0.,0.,-1.)); +#319706 = ORIENTED_EDGE('',*,*,#319707,.F.); +#319707 = EDGE_CURVE('',#319668,#319700,#319708,.T.); +#319708 = CIRCLE('',#319709,0.300000357606); +#319709 = AXIS2_PLACEMENT_3D('',#319710,#319711,#319712); +#319710 = CARTESIAN_POINT('',(149.35000044236,-130.7599995576,0.)); +#319711 = DIRECTION('',(0.,0.,-1.)); +#319712 = DIRECTION('',(0.382681402637,-0.92388037325,0.)); +#319713 = CYLINDRICAL_SURFACE('',#319714,0.300000357606); +#319714 = AXIS2_PLACEMENT_3D('',#319715,#319716,#319717); +#319715 = CARTESIAN_POINT('',(149.35000044236,-130.7599995576,0.)); +#319716 = DIRECTION('',(-0.,-0.,1.)); +#319717 = DIRECTION('',(0.382681402637,-0.92388037325,0.)); +#319718 = ADVANCED_FACE('',(#319719),#319744,.F.); +#319719 = FACE_BOUND('',#319720,.F.); +#319720 = EDGE_LOOP('',(#319721,#319722,#319730,#319738)); +#319721 = ORIENTED_EDGE('',*,*,#319699,.T.); +#319722 = ORIENTED_EDGE('',*,*,#319723,.T.); +#319723 = EDGE_CURVE('',#319691,#319724,#319726,.T.); +#319724 = VERTEX_POINT('',#319725); +#319725 = CARTESIAN_POINT('',(149.080499,-130.631921,-3.5E-02)); +#319726 = LINE('',#319727,#319728); +#319727 = CARTESIAN_POINT('',(149.072836,-130.645195,-3.5E-02)); +#319728 = VECTOR('',#319729,1.); +#319729 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#319730 = ORIENTED_EDGE('',*,*,#319731,.F.); +#319731 = EDGE_CURVE('',#319732,#319724,#319734,.T.); +#319732 = VERTEX_POINT('',#319733); +#319733 = CARTESIAN_POINT('',(149.080499,-130.631921,0.)); +#319734 = LINE('',#319735,#319736); +#319735 = CARTESIAN_POINT('',(149.080499,-130.631921,0.)); +#319736 = VECTOR('',#319737,1.); +#319737 = DIRECTION('',(0.,0.,-1.)); +#319738 = ORIENTED_EDGE('',*,*,#319739,.F.); +#319739 = EDGE_CURVE('',#319700,#319732,#319740,.T.); +#319740 = LINE('',#319741,#319742); +#319741 = CARTESIAN_POINT('',(149.072836,-130.645195,0.)); +#319742 = VECTOR('',#319743,1.); +#319743 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#319744 = PLANE('',#319745); +#319745 = AXIS2_PLACEMENT_3D('',#319746,#319747,#319748); +#319746 = CARTESIAN_POINT('',(149.072836,-130.645195,0.)); +#319747 = DIRECTION('',(0.86604652018,-0.499963423546,0.)); +#319748 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#319749 = ADVANCED_FACE('',(#319750),#319775,.F.); +#319750 = FACE_BOUND('',#319751,.F.); +#319751 = EDGE_LOOP('',(#319752,#319753,#319761,#319769)); +#319752 = ORIENTED_EDGE('',*,*,#319731,.T.); +#319753 = ORIENTED_EDGE('',*,*,#319754,.T.); +#319754 = EDGE_CURVE('',#319724,#319755,#319757,.T.); +#319755 = VERTEX_POINT('',#319756); +#319756 = CARTESIAN_POINT('',(147.586853,-129.135557,-3.5E-02)); +#319757 = LINE('',#319758,#319759); +#319758 = CARTESIAN_POINT('',(149.080499,-130.631921,-3.5E-02)); +#319759 = VECTOR('',#319760,1.); +#319760 = DIRECTION('',(-0.706463710102,0.707749267968,0.)); +#319761 = ORIENTED_EDGE('',*,*,#319762,.F.); +#319762 = EDGE_CURVE('',#319763,#319755,#319765,.T.); +#319763 = VERTEX_POINT('',#319764); +#319764 = CARTESIAN_POINT('',(147.586853,-129.135557,0.)); +#319765 = LINE('',#319766,#319767); +#319766 = CARTESIAN_POINT('',(147.586853,-129.135557,0.)); +#319767 = VECTOR('',#319768,1.); +#319768 = DIRECTION('',(0.,0.,-1.)); +#319769 = ORIENTED_EDGE('',*,*,#319770,.F.); +#319770 = EDGE_CURVE('',#319732,#319763,#319771,.T.); +#319771 = LINE('',#319772,#319773); +#319772 = CARTESIAN_POINT('',(149.080499,-130.631921,0.)); +#319773 = VECTOR('',#319774,1.); +#319774 = DIRECTION('',(-0.706463710102,0.707749267968,0.)); +#319775 = PLANE('',#319776); +#319776 = AXIS2_PLACEMENT_3D('',#319777,#319778,#319779); +#319777 = CARTESIAN_POINT('',(149.080499,-130.631921,0.)); +#319778 = DIRECTION('',(0.707749267968,0.706463710102,0.)); +#319779 = DIRECTION('',(-0.706463710102,0.707749267968,0.)); +#319780 = ADVANCED_FACE('',(#319781),#319806,.F.); +#319781 = FACE_BOUND('',#319782,.F.); +#319782 = EDGE_LOOP('',(#319783,#319784,#319792,#319800)); +#319783 = ORIENTED_EDGE('',*,*,#319762,.T.); +#319784 = ORIENTED_EDGE('',*,*,#319785,.T.); +#319785 = EDGE_CURVE('',#319755,#319786,#319788,.T.); +#319786 = VERTEX_POINT('',#319787); +#319787 = CARTESIAN_POINT('',(147.571921,-129.099509,-3.5E-02)); +#319788 = LINE('',#319789,#319790); +#319789 = CARTESIAN_POINT('',(147.586853,-129.135557,-3.5E-02)); +#319790 = VECTOR('',#319791,1.); +#319791 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#319792 = ORIENTED_EDGE('',*,*,#319793,.F.); +#319793 = EDGE_CURVE('',#319794,#319786,#319796,.T.); +#319794 = VERTEX_POINT('',#319795); +#319795 = CARTESIAN_POINT('',(147.571921,-129.099509,0.)); +#319796 = LINE('',#319797,#319798); +#319797 = CARTESIAN_POINT('',(147.571921,-129.099509,0.)); +#319798 = VECTOR('',#319799,1.); +#319799 = DIRECTION('',(0.,0.,-1.)); +#319800 = ORIENTED_EDGE('',*,*,#319801,.F.); +#319801 = EDGE_CURVE('',#319763,#319794,#319802,.T.); +#319802 = LINE('',#319803,#319804); +#319803 = CARTESIAN_POINT('',(147.586853,-129.135557,0.)); +#319804 = VECTOR('',#319805,1.); +#319805 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#319806 = PLANE('',#319807); +#319807 = AXIS2_PLACEMENT_3D('',#319808,#319809,#319810); +#319808 = CARTESIAN_POINT('',(147.586853,-129.135557,0.)); +#319809 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#319810 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#319811 = ADVANCED_FACE('',(#319812),#319837,.F.); +#319812 = FACE_BOUND('',#319813,.F.); +#319813 = EDGE_LOOP('',(#319814,#319815,#319823,#319831)); +#319814 = ORIENTED_EDGE('',*,*,#319793,.T.); +#319815 = ORIENTED_EDGE('',*,*,#319816,.T.); +#319816 = EDGE_CURVE('',#319786,#319817,#319819,.T.); +#319817 = VERTEX_POINT('',#319818); +#319818 = CARTESIAN_POINT('',(147.571921,-128.880491,-3.5E-02)); +#319819 = LINE('',#319820,#319821); +#319820 = CARTESIAN_POINT('',(147.571921,-129.099509,-3.5E-02)); +#319821 = VECTOR('',#319822,1.); +#319822 = DIRECTION('',(0.,1.,0.)); +#319823 = ORIENTED_EDGE('',*,*,#319824,.F.); +#319824 = EDGE_CURVE('',#319825,#319817,#319827,.T.); +#319825 = VERTEX_POINT('',#319826); +#319826 = CARTESIAN_POINT('',(147.571921,-128.880491,0.)); +#319827 = LINE('',#319828,#319829); +#319828 = CARTESIAN_POINT('',(147.571921,-128.880491,0.)); +#319829 = VECTOR('',#319830,1.); +#319830 = DIRECTION('',(0.,0.,-1.)); +#319831 = ORIENTED_EDGE('',*,*,#319832,.F.); +#319832 = EDGE_CURVE('',#319794,#319825,#319833,.T.); +#319833 = LINE('',#319834,#319835); +#319834 = CARTESIAN_POINT('',(147.571921,-129.099509,0.)); +#319835 = VECTOR('',#319836,1.); +#319836 = DIRECTION('',(0.,1.,0.)); +#319837 = PLANE('',#319838); +#319838 = AXIS2_PLACEMENT_3D('',#319839,#319840,#319841); +#319839 = CARTESIAN_POINT('',(147.571921,-129.099509,0.)); +#319840 = DIRECTION('',(1.,-0.,0.)); +#319841 = DIRECTION('',(0.,1.,0.)); +#319842 = ADVANCED_FACE('',(#319843),#319868,.F.); +#319843 = FACE_BOUND('',#319844,.F.); +#319844 = EDGE_LOOP('',(#319845,#319846,#319854,#319862)); +#319845 = ORIENTED_EDGE('',*,*,#319824,.T.); +#319846 = ORIENTED_EDGE('',*,*,#319847,.T.); +#319847 = EDGE_CURVE('',#319817,#319848,#319850,.T.); +#319848 = VERTEX_POINT('',#319849); +#319849 = CARTESIAN_POINT('',(147.586853,-128.844443,-3.5E-02)); +#319850 = LINE('',#319851,#319852); +#319851 = CARTESIAN_POINT('',(147.571921,-128.880491,-3.5E-02)); +#319852 = VECTOR('',#319853,1.); +#319853 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#319854 = ORIENTED_EDGE('',*,*,#319855,.F.); +#319855 = EDGE_CURVE('',#319856,#319848,#319858,.T.); +#319856 = VERTEX_POINT('',#319857); +#319857 = CARTESIAN_POINT('',(147.586853,-128.844443,0.)); +#319858 = LINE('',#319859,#319860); +#319859 = CARTESIAN_POINT('',(147.586853,-128.844443,0.)); +#319860 = VECTOR('',#319861,1.); +#319861 = DIRECTION('',(0.,0.,-1.)); +#319862 = ORIENTED_EDGE('',*,*,#319863,.F.); +#319863 = EDGE_CURVE('',#319825,#319856,#319864,.T.); +#319864 = LINE('',#319865,#319866); +#319865 = CARTESIAN_POINT('',(147.571921,-128.880491,0.)); +#319866 = VECTOR('',#319867,1.); +#319867 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#319868 = PLANE('',#319869); +#319869 = AXIS2_PLACEMENT_3D('',#319870,#319871,#319872); +#319870 = CARTESIAN_POINT('',(147.571921,-128.880491,0.)); +#319871 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#319872 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#319873 = ADVANCED_FACE('',(#319874),#319890,.F.); +#319874 = FACE_BOUND('',#319875,.F.); +#319875 = EDGE_LOOP('',(#319876,#319877,#319883,#319884)); +#319876 = ORIENTED_EDGE('',*,*,#319855,.T.); +#319877 = ORIENTED_EDGE('',*,*,#319878,.T.); +#319878 = EDGE_CURVE('',#319848,#319367,#319879,.T.); +#319879 = LINE('',#319880,#319881); +#319880 = CARTESIAN_POINT('',(147.586853,-128.844443,-3.5E-02)); +#319881 = VECTOR('',#319882,1.); +#319882 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#319883 = ORIENTED_EDGE('',*,*,#319364,.F.); +#319884 = ORIENTED_EDGE('',*,*,#319885,.F.); +#319885 = EDGE_CURVE('',#319856,#319365,#319886,.T.); +#319886 = LINE('',#319887,#319888); +#319887 = CARTESIAN_POINT('',(147.586853,-128.844443,0.)); +#319888 = VECTOR('',#319889,1.); +#319889 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#319890 = PLANE('',#319891); +#319891 = AXIS2_PLACEMENT_3D('',#319892,#319893,#319894); +#319892 = CARTESIAN_POINT('',(147.586853,-128.844443,0.)); +#319893 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#319894 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#319895 = ADVANCED_FACE('',(#319896),#319923,.F.); +#319896 = FACE_BOUND('',#319897,.F.); +#319897 = EDGE_LOOP('',(#319898,#319908,#319915,#319916)); +#319898 = ORIENTED_EDGE('',*,*,#319899,.T.); +#319899 = EDGE_CURVE('',#319900,#319902,#319904,.T.); +#319900 = VERTEX_POINT('',#319901); +#319901 = CARTESIAN_POINT('',(149.487255,-130.76,0.)); +#319902 = VERTEX_POINT('',#319903); +#319903 = CARTESIAN_POINT('',(149.487255,-130.76,-3.5E-02)); +#319904 = LINE('',#319905,#319906); +#319905 = CARTESIAN_POINT('',(149.487255,-130.76,0.)); +#319906 = VECTOR('',#319907,1.); +#319907 = DIRECTION('',(0.,0.,-1.)); +#319908 = ORIENTED_EDGE('',*,*,#319909,.T.); +#319909 = EDGE_CURVE('',#319902,#319902,#319910,.T.); +#319910 = CIRCLE('',#319911,0.137255); +#319911 = AXIS2_PLACEMENT_3D('',#319912,#319913,#319914); +#319912 = CARTESIAN_POINT('',(149.35,-130.76,-3.5E-02)); +#319913 = DIRECTION('',(0.,0.,1.)); +#319914 = DIRECTION('',(1.,0.,-0.)); +#319915 = ORIENTED_EDGE('',*,*,#319899,.F.); +#319916 = ORIENTED_EDGE('',*,*,#319917,.F.); +#319917 = EDGE_CURVE('',#319900,#319900,#319918,.T.); +#319918 = CIRCLE('',#319919,0.137255); +#319919 = AXIS2_PLACEMENT_3D('',#319920,#319921,#319922); +#319920 = CARTESIAN_POINT('',(149.35,-130.76,0.)); +#319921 = DIRECTION('',(0.,0.,1.)); +#319922 = DIRECTION('',(1.,0.,-0.)); +#319923 = CYLINDRICAL_SURFACE('',#319924,0.137255); +#319924 = AXIS2_PLACEMENT_3D('',#319925,#319926,#319927); +#319925 = CARTESIAN_POINT('',(149.35,-130.76,0.)); +#319926 = DIRECTION('',(0.,0.,1.)); +#319927 = DIRECTION('',(1.,0.,-0.)); +#319928 = ADVANCED_FACE('',(#319929,#319948),#319951,.F.); +#319929 = FACE_BOUND('',#319930,.F.); +#319930 = EDGE_LOOP('',(#319931,#319932,#319933,#319934,#319935,#319936, + #319937,#319938,#319939,#319940,#319941,#319942,#319943,#319944, + #319945,#319946,#319947)); +#319931 = ORIENTED_EDGE('',*,*,#319391,.T.); +#319932 = ORIENTED_EDGE('',*,*,#319423,.T.); +#319933 = ORIENTED_EDGE('',*,*,#319454,.T.); +#319934 = ORIENTED_EDGE('',*,*,#319485,.T.); +#319935 = ORIENTED_EDGE('',*,*,#319517,.T.); +#319936 = ORIENTED_EDGE('',*,*,#319549,.T.); +#319937 = ORIENTED_EDGE('',*,*,#319580,.T.); +#319938 = ORIENTED_EDGE('',*,*,#319612,.T.); +#319939 = ORIENTED_EDGE('',*,*,#319644,.T.); +#319940 = ORIENTED_EDGE('',*,*,#319675,.T.); +#319941 = ORIENTED_EDGE('',*,*,#319707,.T.); +#319942 = ORIENTED_EDGE('',*,*,#319739,.T.); +#319943 = ORIENTED_EDGE('',*,*,#319770,.T.); +#319944 = ORIENTED_EDGE('',*,*,#319801,.T.); +#319945 = ORIENTED_EDGE('',*,*,#319832,.T.); +#319946 = ORIENTED_EDGE('',*,*,#319863,.T.); +#319947 = ORIENTED_EDGE('',*,*,#319885,.T.); +#319948 = FACE_BOUND('',#319949,.F.); +#319949 = EDGE_LOOP('',(#319950)); +#319950 = ORIENTED_EDGE('',*,*,#319917,.T.); +#319951 = PLANE('',#319952); +#319952 = AXIS2_PLACEMENT_3D('',#319953,#319954,#319955); +#319953 = CARTESIAN_POINT('',(0.,0.,0.)); +#319954 = DIRECTION('',(-0.,-0.,-1.)); +#319955 = DIRECTION('',(-1.,0.,0.)); +#319956 = ADVANCED_FACE('',(#319957,#319976),#319979,.T.); +#319957 = FACE_BOUND('',#319958,.T.); +#319958 = EDGE_LOOP('',(#319959,#319960,#319961,#319962,#319963,#319964, + #319965,#319966,#319967,#319968,#319969,#319970,#319971,#319972, + #319973,#319974,#319975)); +#319959 = ORIENTED_EDGE('',*,*,#319374,.T.); +#319960 = ORIENTED_EDGE('',*,*,#319407,.T.); +#319961 = ORIENTED_EDGE('',*,*,#319438,.T.); +#319962 = ORIENTED_EDGE('',*,*,#319469,.T.); +#319963 = ORIENTED_EDGE('',*,*,#319500,.T.); +#319964 = ORIENTED_EDGE('',*,*,#319533,.T.); +#319965 = ORIENTED_EDGE('',*,*,#319564,.T.); +#319966 = ORIENTED_EDGE('',*,*,#319595,.T.); +#319967 = ORIENTED_EDGE('',*,*,#319628,.T.); +#319968 = ORIENTED_EDGE('',*,*,#319659,.T.); +#319969 = ORIENTED_EDGE('',*,*,#319690,.T.); +#319970 = ORIENTED_EDGE('',*,*,#319723,.T.); +#319971 = ORIENTED_EDGE('',*,*,#319754,.T.); +#319972 = ORIENTED_EDGE('',*,*,#319785,.T.); +#319973 = ORIENTED_EDGE('',*,*,#319816,.T.); +#319974 = ORIENTED_EDGE('',*,*,#319847,.T.); +#319975 = ORIENTED_EDGE('',*,*,#319878,.T.); +#319976 = FACE_BOUND('',#319977,.T.); +#319977 = EDGE_LOOP('',(#319978)); +#319978 = ORIENTED_EDGE('',*,*,#319909,.T.); +#319979 = PLANE('',#319980); +#319980 = AXIS2_PLACEMENT_3D('',#319981,#319982,#319983); +#319981 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#319982 = DIRECTION('',(-0.,-0.,-1.)); +#319983 = DIRECTION('',(-1.,0.,0.)); +#319984 = MANIFOLD_SOLID_BREP('',#319985); +#319985 = CLOSED_SHELL('',(#319986,#320026,#320057,#320088,#320119, + #320150,#320183,#320214,#320247,#320278,#320309,#320342,#320373, + #320404,#320437,#320468,#320499,#320530,#320561,#320592,#320623, + #320654,#320685,#320716,#320747,#320778,#320809,#320840,#320871, + #320904,#320935,#320966,#320999,#321030,#321061,#321092,#321123, + #321154,#321187,#321218,#321249,#321280,#321311,#321342,#321364, + #321397,#321430,#321488)); +#319986 = ADVANCED_FACE('',(#319987),#320021,.F.); +#319987 = FACE_BOUND('',#319988,.F.); +#319988 = EDGE_LOOP('',(#319989,#319999,#320007,#320015)); +#319989 = ORIENTED_EDGE('',*,*,#319990,.T.); +#319990 = EDGE_CURVE('',#319991,#319993,#319995,.T.); +#319991 = VERTEX_POINT('',#319992); +#319992 = CARTESIAN_POINT('',(147.125519,-113.796853,0.)); +#319993 = VERTEX_POINT('',#319994); +#319994 = CARTESIAN_POINT('',(147.125519,-113.796853,-3.5E-02)); +#319995 = LINE('',#319996,#319997); +#319996 = CARTESIAN_POINT('',(147.125519,-113.796853,0.)); +#319997 = VECTOR('',#319998,1.); +#319998 = DIRECTION('',(0.,0.,-1.)); +#319999 = ORIENTED_EDGE('',*,*,#320000,.T.); +#320000 = EDGE_CURVE('',#319993,#320001,#320003,.T.); +#320001 = VERTEX_POINT('',#320002); +#320002 = CARTESIAN_POINT('',(147.161567,-113.781921,-3.5E-02)); +#320003 = LINE('',#320004,#320005); +#320004 = CARTESIAN_POINT('',(147.125519,-113.796853,-3.5E-02)); +#320005 = VECTOR('',#320006,1.); +#320006 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#320007 = ORIENTED_EDGE('',*,*,#320008,.F.); +#320008 = EDGE_CURVE('',#320009,#320001,#320011,.T.); +#320009 = VERTEX_POINT('',#320010); +#320010 = CARTESIAN_POINT('',(147.161567,-113.781921,0.)); +#320011 = LINE('',#320012,#320013); +#320012 = CARTESIAN_POINT('',(147.161567,-113.781921,0.)); +#320013 = VECTOR('',#320014,1.); +#320014 = DIRECTION('',(0.,0.,-1.)); +#320015 = ORIENTED_EDGE('',*,*,#320016,.F.); +#320016 = EDGE_CURVE('',#319991,#320009,#320017,.T.); +#320017 = LINE('',#320018,#320019); +#320018 = CARTESIAN_POINT('',(147.125519,-113.796853,0.)); +#320019 = VECTOR('',#320020,1.); +#320020 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#320021 = PLANE('',#320022); +#320022 = AXIS2_PLACEMENT_3D('',#320023,#320024,#320025); +#320023 = CARTESIAN_POINT('',(147.125519,-113.796853,0.)); +#320024 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#320025 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#320026 = ADVANCED_FACE('',(#320027),#320052,.F.); +#320027 = FACE_BOUND('',#320028,.F.); +#320028 = EDGE_LOOP('',(#320029,#320030,#320038,#320046)); +#320029 = ORIENTED_EDGE('',*,*,#320008,.T.); +#320030 = ORIENTED_EDGE('',*,*,#320031,.T.); +#320031 = EDGE_CURVE('',#320001,#320032,#320034,.T.); +#320032 = VERTEX_POINT('',#320033); +#320033 = CARTESIAN_POINT('',(147.919509,-113.781921,-3.5E-02)); +#320034 = LINE('',#320035,#320036); +#320035 = CARTESIAN_POINT('',(147.161567,-113.781921,-3.5E-02)); +#320036 = VECTOR('',#320037,1.); +#320037 = DIRECTION('',(1.,0.,0.)); +#320038 = ORIENTED_EDGE('',*,*,#320039,.F.); +#320039 = EDGE_CURVE('',#320040,#320032,#320042,.T.); +#320040 = VERTEX_POINT('',#320041); +#320041 = CARTESIAN_POINT('',(147.919509,-113.781921,0.)); +#320042 = LINE('',#320043,#320044); +#320043 = CARTESIAN_POINT('',(147.919509,-113.781921,0.)); +#320044 = VECTOR('',#320045,1.); +#320045 = DIRECTION('',(0.,0.,-1.)); +#320046 = ORIENTED_EDGE('',*,*,#320047,.F.); +#320047 = EDGE_CURVE('',#320009,#320040,#320048,.T.); +#320048 = LINE('',#320049,#320050); +#320049 = CARTESIAN_POINT('',(147.161567,-113.781921,0.)); +#320050 = VECTOR('',#320051,1.); +#320051 = DIRECTION('',(1.,0.,0.)); +#320052 = PLANE('',#320053); +#320053 = AXIS2_PLACEMENT_3D('',#320054,#320055,#320056); +#320054 = CARTESIAN_POINT('',(147.161567,-113.781921,0.)); +#320055 = DIRECTION('',(0.,-1.,0.)); +#320056 = DIRECTION('',(1.,0.,0.)); +#320057 = ADVANCED_FACE('',(#320058),#320083,.F.); +#320058 = FACE_BOUND('',#320059,.F.); +#320059 = EDGE_LOOP('',(#320060,#320061,#320069,#320077)); +#320060 = ORIENTED_EDGE('',*,*,#320039,.T.); +#320061 = ORIENTED_EDGE('',*,*,#320062,.T.); +#320062 = EDGE_CURVE('',#320032,#320063,#320065,.T.); +#320063 = VERTEX_POINT('',#320064); +#320064 = CARTESIAN_POINT('',(147.955557,-113.796853,-3.5E-02)); +#320065 = LINE('',#320066,#320067); +#320066 = CARTESIAN_POINT('',(147.919509,-113.781921,-3.5E-02)); +#320067 = VECTOR('',#320068,1.); +#320068 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320069 = ORIENTED_EDGE('',*,*,#320070,.F.); +#320070 = EDGE_CURVE('',#320071,#320063,#320073,.T.); +#320071 = VERTEX_POINT('',#320072); +#320072 = CARTESIAN_POINT('',(147.955557,-113.796853,0.)); +#320073 = LINE('',#320074,#320075); +#320074 = CARTESIAN_POINT('',(147.955557,-113.796853,0.)); +#320075 = VECTOR('',#320076,1.); +#320076 = DIRECTION('',(0.,0.,-1.)); +#320077 = ORIENTED_EDGE('',*,*,#320078,.F.); +#320078 = EDGE_CURVE('',#320040,#320071,#320079,.T.); +#320079 = LINE('',#320080,#320081); +#320080 = CARTESIAN_POINT('',(147.919509,-113.781921,0.)); +#320081 = VECTOR('',#320082,1.); +#320082 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320083 = PLANE('',#320084); +#320084 = AXIS2_PLACEMENT_3D('',#320085,#320086,#320087); +#320085 = CARTESIAN_POINT('',(147.919509,-113.781921,0.)); +#320086 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#320087 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320088 = ADVANCED_FACE('',(#320089),#320114,.F.); +#320089 = FACE_BOUND('',#320090,.F.); +#320090 = EDGE_LOOP('',(#320091,#320092,#320100,#320108)); +#320091 = ORIENTED_EDGE('',*,*,#320070,.T.); +#320092 = ORIENTED_EDGE('',*,*,#320093,.T.); +#320093 = EDGE_CURVE('',#320063,#320094,#320096,.T.); +#320094 = VERTEX_POINT('',#320095); +#320095 = CARTESIAN_POINT('',(148.413568,-114.252146,-3.5E-02)); +#320096 = LINE('',#320097,#320098); +#320097 = CARTESIAN_POINT('',(147.955557,-113.796853,-3.5E-02)); +#320098 = VECTOR('',#320099,1.); +#320099 = DIRECTION('',(0.709207996029,-0.704999303807,0.)); +#320100 = ORIENTED_EDGE('',*,*,#320101,.F.); +#320101 = EDGE_CURVE('',#320102,#320094,#320104,.T.); +#320102 = VERTEX_POINT('',#320103); +#320103 = CARTESIAN_POINT('',(148.413568,-114.252146,0.)); +#320104 = LINE('',#320105,#320106); +#320105 = CARTESIAN_POINT('',(148.413568,-114.252146,0.)); +#320106 = VECTOR('',#320107,1.); +#320107 = DIRECTION('',(0.,0.,-1.)); +#320108 = ORIENTED_EDGE('',*,*,#320109,.F.); +#320109 = EDGE_CURVE('',#320071,#320102,#320110,.T.); +#320110 = LINE('',#320111,#320112); +#320111 = CARTESIAN_POINT('',(147.955557,-113.796853,0.)); +#320112 = VECTOR('',#320113,1.); +#320113 = DIRECTION('',(0.709207996029,-0.704999303807,0.)); +#320114 = PLANE('',#320115); +#320115 = AXIS2_PLACEMENT_3D('',#320116,#320117,#320118); +#320116 = CARTESIAN_POINT('',(147.955557,-113.796853,0.)); +#320117 = DIRECTION('',(-0.704999303807,-0.709207996029,-0.)); +#320118 = DIRECTION('',(0.709207996029,-0.704999303807,0.)); +#320119 = ADVANCED_FACE('',(#320120),#320145,.F.); +#320120 = FACE_BOUND('',#320121,.F.); +#320121 = EDGE_LOOP('',(#320122,#320123,#320131,#320139)); +#320122 = ORIENTED_EDGE('',*,*,#320101,.T.); +#320123 = ORIENTED_EDGE('',*,*,#320124,.T.); +#320124 = EDGE_CURVE('',#320094,#320125,#320127,.T.); +#320125 = VERTEX_POINT('',#320126); +#320126 = CARTESIAN_POINT('',(148.46635,-114.230284,-3.5E-02)); +#320127 = LINE('',#320128,#320129); +#320128 = CARTESIAN_POINT('',(148.413568,-114.252146,-3.5E-02)); +#320129 = VECTOR('',#320130,1.); +#320130 = DIRECTION('',(0.923885846228,0.382668189349,0.)); +#320131 = ORIENTED_EDGE('',*,*,#320132,.F.); +#320132 = EDGE_CURVE('',#320133,#320125,#320135,.T.); +#320133 = VERTEX_POINT('',#320134); +#320134 = CARTESIAN_POINT('',(148.46635,-114.230284,0.)); +#320135 = LINE('',#320136,#320137); +#320136 = CARTESIAN_POINT('',(148.46635,-114.230284,0.)); +#320137 = VECTOR('',#320138,1.); +#320138 = DIRECTION('',(0.,0.,-1.)); +#320139 = ORIENTED_EDGE('',*,*,#320140,.F.); +#320140 = EDGE_CURVE('',#320102,#320133,#320141,.T.); +#320141 = LINE('',#320142,#320143); +#320142 = CARTESIAN_POINT('',(148.413568,-114.252146,0.)); +#320143 = VECTOR('',#320144,1.); +#320144 = DIRECTION('',(0.923885846228,0.382668189349,0.)); +#320145 = PLANE('',#320146); +#320146 = AXIS2_PLACEMENT_3D('',#320147,#320148,#320149); +#320147 = CARTESIAN_POINT('',(148.413568,-114.252146,0.)); +#320148 = DIRECTION('',(0.382668189349,-0.923885846228,0.)); +#320149 = DIRECTION('',(0.923885846228,0.382668189349,0.)); +#320150 = ADVANCED_FACE('',(#320151),#320178,.T.); +#320151 = FACE_BOUND('',#320152,.F.); +#320152 = EDGE_LOOP('',(#320153,#320154,#320163,#320171)); +#320153 = ORIENTED_EDGE('',*,*,#320132,.T.); +#320154 = ORIENTED_EDGE('',*,*,#320155,.T.); +#320155 = EDGE_CURVE('',#320125,#320156,#320158,.T.); +#320156 = VERTEX_POINT('',#320157); +#320157 = CARTESIAN_POINT('',(148.714454,-114.305546,-3.5E-02)); +#320158 = CIRCLE('',#320159,0.274997948292); +#320159 = AXIS2_PLACEMENT_3D('',#320160,#320161,#320162); +#320160 = CARTESIAN_POINT('',(148.52,-114.499997828,-3.5E-02)); +#320161 = DIRECTION('',(0.,0.,-1.)); +#320162 = DIRECTION('',(-0.195092364627,0.9807848741,0.)); +#320163 = ORIENTED_EDGE('',*,*,#320164,.F.); +#320164 = EDGE_CURVE('',#320165,#320156,#320167,.T.); +#320165 = VERTEX_POINT('',#320166); +#320166 = CARTESIAN_POINT('',(148.714454,-114.305546,0.)); +#320167 = LINE('',#320168,#320169); +#320168 = CARTESIAN_POINT('',(148.714454,-114.305546,0.)); +#320169 = VECTOR('',#320170,1.); +#320170 = DIRECTION('',(0.,0.,-1.)); +#320171 = ORIENTED_EDGE('',*,*,#320172,.F.); +#320172 = EDGE_CURVE('',#320133,#320165,#320173,.T.); +#320173 = CIRCLE('',#320174,0.274997948292); +#320174 = AXIS2_PLACEMENT_3D('',#320175,#320176,#320177); +#320175 = CARTESIAN_POINT('',(148.52,-114.499997828,0.)); +#320176 = DIRECTION('',(0.,0.,-1.)); +#320177 = DIRECTION('',(-0.195092364627,0.9807848741,0.)); +#320178 = CYLINDRICAL_SURFACE('',#320179,0.274997948292); +#320179 = AXIS2_PLACEMENT_3D('',#320180,#320181,#320182); +#320180 = CARTESIAN_POINT('',(148.52,-114.499997828,0.)); +#320181 = DIRECTION('',(-0.,-0.,1.)); +#320182 = DIRECTION('',(-0.195092364627,0.9807848741,0.)); +#320183 = ADVANCED_FACE('',(#320184),#320209,.F.); +#320184 = FACE_BOUND('',#320185,.F.); +#320185 = EDGE_LOOP('',(#320186,#320187,#320195,#320203)); +#320186 = ORIENTED_EDGE('',*,*,#320164,.T.); +#320187 = ORIENTED_EDGE('',*,*,#320188,.T.); +#320188 = EDGE_CURVE('',#320156,#320189,#320191,.T.); +#320189 = VERTEX_POINT('',#320190); +#320190 = CARTESIAN_POINT('',(148.819454,-114.410545,-3.5E-02)); +#320191 = LINE('',#320192,#320193); +#320192 = CARTESIAN_POINT('',(148.714454,-114.305546,-3.5E-02)); +#320193 = VECTOR('',#320194,1.); +#320194 = DIRECTION('',(0.70711014837,-0.707103413987,0.)); +#320195 = ORIENTED_EDGE('',*,*,#320196,.F.); +#320196 = EDGE_CURVE('',#320197,#320189,#320199,.T.); +#320197 = VERTEX_POINT('',#320198); +#320198 = CARTESIAN_POINT('',(148.819454,-114.410545,0.)); +#320199 = LINE('',#320200,#320201); +#320200 = CARTESIAN_POINT('',(148.819454,-114.410545,0.)); +#320201 = VECTOR('',#320202,1.); +#320202 = DIRECTION('',(0.,0.,-1.)); +#320203 = ORIENTED_EDGE('',*,*,#320204,.F.); +#320204 = EDGE_CURVE('',#320165,#320197,#320205,.T.); +#320205 = LINE('',#320206,#320207); +#320206 = CARTESIAN_POINT('',(148.714454,-114.305546,0.)); +#320207 = VECTOR('',#320208,1.); +#320208 = DIRECTION('',(0.70711014837,-0.707103413987,0.)); +#320209 = PLANE('',#320210); +#320210 = AXIS2_PLACEMENT_3D('',#320211,#320212,#320213); +#320211 = CARTESIAN_POINT('',(148.714454,-114.305546,0.)); +#320212 = DIRECTION('',(-0.707103413987,-0.70711014837,-0.)); +#320213 = DIRECTION('',(0.70711014837,-0.707103413987,0.)); +#320214 = ADVANCED_FACE('',(#320215),#320242,.T.); +#320215 = FACE_BOUND('',#320216,.F.); +#320216 = EDGE_LOOP('',(#320217,#320218,#320227,#320235)); +#320217 = ORIENTED_EDGE('',*,*,#320196,.T.); +#320218 = ORIENTED_EDGE('',*,*,#320219,.T.); +#320219 = EDGE_CURVE('',#320189,#320220,#320222,.T.); +#320220 = VERTEX_POINT('',#320221); +#320221 = CARTESIAN_POINT('',(148.777781,-114.833654,-3.5E-02)); +#320222 = CIRCLE('',#320223,0.274999563134); +#320223 = AXIS2_PLACEMENT_3D('',#320224,#320225,#320226); +#320224 = CARTESIAN_POINT('',(148.62500043535,-114.6049995471,-3.5E-02) + ); +#320225 = DIRECTION('',(0.,0.,-1.)); +#320226 = DIRECTION('',(0.707104994738,0.707108567631,0.)); +#320227 = ORIENTED_EDGE('',*,*,#320228,.F.); +#320228 = EDGE_CURVE('',#320229,#320220,#320231,.T.); +#320229 = VERTEX_POINT('',#320230); +#320230 = CARTESIAN_POINT('',(148.777781,-114.833654,0.)); +#320231 = LINE('',#320232,#320233); +#320232 = CARTESIAN_POINT('',(148.777781,-114.833654,0.)); +#320233 = VECTOR('',#320234,1.); +#320234 = DIRECTION('',(0.,0.,-1.)); +#320235 = ORIENTED_EDGE('',*,*,#320236,.F.); +#320236 = EDGE_CURVE('',#320197,#320229,#320237,.T.); +#320237 = CIRCLE('',#320238,0.274999563134); +#320238 = AXIS2_PLACEMENT_3D('',#320239,#320240,#320241); +#320239 = CARTESIAN_POINT('',(148.62500043535,-114.6049995471,0.)); +#320240 = DIRECTION('',(0.,0.,-1.)); +#320241 = DIRECTION('',(0.707104994738,0.707108567631,0.)); +#320242 = CYLINDRICAL_SURFACE('',#320243,0.274999563134); +#320243 = AXIS2_PLACEMENT_3D('',#320244,#320245,#320246); +#320244 = CARTESIAN_POINT('',(148.62500043535,-114.6049995471,0.)); +#320245 = DIRECTION('',(-0.,-0.,1.)); +#320246 = DIRECTION('',(0.707104994738,0.707108567631,0.)); +#320247 = ADVANCED_FACE('',(#320248),#320273,.F.); +#320248 = FACE_BOUND('',#320249,.F.); +#320249 = EDGE_LOOP('',(#320250,#320251,#320259,#320267)); +#320250 = ORIENTED_EDGE('',*,*,#320228,.T.); +#320251 = ORIENTED_EDGE('',*,*,#320252,.T.); +#320252 = EDGE_CURVE('',#320220,#320253,#320255,.T.); +#320253 = VERTEX_POINT('',#320254); +#320254 = CARTESIAN_POINT('',(148.725,-114.855516,-3.5E-02)); +#320255 = LINE('',#320256,#320257); +#320256 = CARTESIAN_POINT('',(148.777781,-114.833654,-3.5E-02)); +#320257 = VECTOR('',#320258,1.); +#320258 = DIRECTION('',(-0.923883282997,-0.382674377766,0.)); +#320259 = ORIENTED_EDGE('',*,*,#320260,.F.); +#320260 = EDGE_CURVE('',#320261,#320253,#320263,.T.); +#320261 = VERTEX_POINT('',#320262); +#320262 = CARTESIAN_POINT('',(148.725,-114.855516,0.)); +#320263 = LINE('',#320264,#320265); +#320264 = CARTESIAN_POINT('',(148.725,-114.855516,0.)); +#320265 = VECTOR('',#320266,1.); +#320266 = DIRECTION('',(0.,0.,-1.)); +#320267 = ORIENTED_EDGE('',*,*,#320268,.F.); +#320268 = EDGE_CURVE('',#320229,#320261,#320269,.T.); +#320269 = LINE('',#320270,#320271); +#320270 = CARTESIAN_POINT('',(148.777781,-114.833654,0.)); +#320271 = VECTOR('',#320272,1.); +#320272 = DIRECTION('',(-0.923883282997,-0.382674377766,0.)); +#320273 = PLANE('',#320274); +#320274 = AXIS2_PLACEMENT_3D('',#320275,#320276,#320277); +#320275 = CARTESIAN_POINT('',(148.777781,-114.833654,0.)); +#320276 = DIRECTION('',(-0.382674377766,0.923883282997,0.)); +#320277 = DIRECTION('',(-0.923883282997,-0.382674377766,0.)); +#320278 = ADVANCED_FACE('',(#320279),#320304,.F.); +#320279 = FACE_BOUND('',#320280,.F.); +#320280 = EDGE_LOOP('',(#320281,#320282,#320290,#320298)); +#320281 = ORIENTED_EDGE('',*,*,#320260,.T.); +#320282 = ORIENTED_EDGE('',*,*,#320283,.T.); +#320283 = EDGE_CURVE('',#320253,#320284,#320286,.T.); +#320284 = VERTEX_POINT('',#320285); +#320285 = CARTESIAN_POINT('',(148.723079,-116.069509,-3.5E-02)); +#320286 = LINE('',#320287,#320288); +#320287 = CARTESIAN_POINT('',(148.725,-114.855516,-3.5E-02)); +#320288 = VECTOR('',#320289,1.); +#320289 = DIRECTION('',(-1.582379465912E-03,-0.999998748037,0.)); +#320290 = ORIENTED_EDGE('',*,*,#320291,.F.); +#320291 = EDGE_CURVE('',#320292,#320284,#320294,.T.); +#320292 = VERTEX_POINT('',#320293); +#320293 = CARTESIAN_POINT('',(148.723079,-116.069509,0.)); +#320294 = LINE('',#320295,#320296); +#320295 = CARTESIAN_POINT('',(148.723079,-116.069509,0.)); +#320296 = VECTOR('',#320297,1.); +#320297 = DIRECTION('',(0.,0.,-1.)); +#320298 = ORIENTED_EDGE('',*,*,#320299,.F.); +#320299 = EDGE_CURVE('',#320261,#320292,#320300,.T.); +#320300 = LINE('',#320301,#320302); +#320301 = CARTESIAN_POINT('',(148.725,-114.855516,0.)); +#320302 = VECTOR('',#320303,1.); +#320303 = DIRECTION('',(-1.582379465912E-03,-0.999998748037,0.)); +#320304 = PLANE('',#320305); +#320305 = AXIS2_PLACEMENT_3D('',#320306,#320307,#320308); +#320306 = CARTESIAN_POINT('',(148.725,-114.855516,0.)); +#320307 = DIRECTION('',(-0.999998748037,1.582379465912E-03,0.)); +#320308 = DIRECTION('',(-1.582379465912E-03,-0.999998748037,0.)); +#320309 = ADVANCED_FACE('',(#320310),#320337,.T.); +#320310 = FACE_BOUND('',#320311,.F.); +#320311 = EDGE_LOOP('',(#320312,#320313,#320322,#320330)); +#320312 = ORIENTED_EDGE('',*,*,#320291,.T.); +#320313 = ORIENTED_EDGE('',*,*,#320314,.T.); +#320314 = EDGE_CURVE('',#320284,#320315,#320317,.T.); +#320315 = VERTEX_POINT('',#320316); +#320316 = CARTESIAN_POINT('',(148.526921,-116.069509,-3.5E-02)); +#320317 = CIRCLE('',#320318,0.100000456609); +#320318 = AXIS2_PLACEMENT_3D('',#320319,#320320,#320321); +#320319 = CARTESIAN_POINT('',(148.625,-116.05,-3.5E-02)); +#320320 = DIRECTION('',(-0.,0.,-1.)); +#320321 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#320322 = ORIENTED_EDGE('',*,*,#320323,.F.); +#320323 = EDGE_CURVE('',#320324,#320315,#320326,.T.); +#320324 = VERTEX_POINT('',#320325); +#320325 = CARTESIAN_POINT('',(148.526921,-116.069509,0.)); +#320326 = LINE('',#320327,#320328); +#320327 = CARTESIAN_POINT('',(148.526921,-116.069509,0.)); +#320328 = VECTOR('',#320329,1.); +#320329 = DIRECTION('',(0.,0.,-1.)); +#320330 = ORIENTED_EDGE('',*,*,#320331,.F.); +#320331 = EDGE_CURVE('',#320292,#320324,#320332,.T.); +#320332 = CIRCLE('',#320333,0.100000456609); +#320333 = AXIS2_PLACEMENT_3D('',#320334,#320335,#320336); +#320334 = CARTESIAN_POINT('',(148.625,-116.05,0.)); +#320335 = DIRECTION('',(-0.,0.,-1.)); +#320336 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#320337 = CYLINDRICAL_SURFACE('',#320338,0.100000456609); +#320338 = AXIS2_PLACEMENT_3D('',#320339,#320340,#320341); +#320339 = CARTESIAN_POINT('',(148.625,-116.05,0.)); +#320340 = DIRECTION('',(0.,-0.,1.)); +#320341 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#320342 = ADVANCED_FACE('',(#320343),#320368,.F.); +#320343 = FACE_BOUND('',#320344,.F.); +#320344 = EDGE_LOOP('',(#320345,#320346,#320354,#320362)); +#320345 = ORIENTED_EDGE('',*,*,#320323,.T.); +#320346 = ORIENTED_EDGE('',*,*,#320347,.T.); +#320347 = EDGE_CURVE('',#320315,#320348,#320350,.T.); +#320348 = VERTEX_POINT('',#320349); +#320349 = CARTESIAN_POINT('',(148.525,-114.855517,-3.5E-02)); +#320350 = LINE('',#320351,#320352); +#320351 = CARTESIAN_POINT('',(148.526921,-116.069509,-3.5E-02)); +#320352 = VECTOR('',#320353,1.); +#320353 = DIRECTION('',(-1.58238076936E-03,0.999998748035,0.)); +#320354 = ORIENTED_EDGE('',*,*,#320355,.F.); +#320355 = EDGE_CURVE('',#320356,#320348,#320358,.T.); +#320356 = VERTEX_POINT('',#320357); +#320357 = CARTESIAN_POINT('',(148.525,-114.855517,0.)); +#320358 = LINE('',#320359,#320360); +#320359 = CARTESIAN_POINT('',(148.525,-114.855517,0.)); +#320360 = VECTOR('',#320361,1.); +#320361 = DIRECTION('',(0.,0.,-1.)); +#320362 = ORIENTED_EDGE('',*,*,#320363,.F.); +#320363 = EDGE_CURVE('',#320324,#320356,#320364,.T.); +#320364 = LINE('',#320365,#320366); +#320365 = CARTESIAN_POINT('',(148.526921,-116.069509,0.)); +#320366 = VECTOR('',#320367,1.); +#320367 = DIRECTION('',(-1.58238076936E-03,0.999998748035,0.)); +#320368 = PLANE('',#320369); +#320369 = AXIS2_PLACEMENT_3D('',#320370,#320371,#320372); +#320370 = CARTESIAN_POINT('',(148.526921,-116.069509,0.)); +#320371 = DIRECTION('',(0.999998748035,1.58238076936E-03,0.)); +#320372 = DIRECTION('',(-1.58238076936E-03,0.999998748035,0.)); +#320373 = ADVANCED_FACE('',(#320374),#320399,.F.); +#320374 = FACE_BOUND('',#320375,.F.); +#320375 = EDGE_LOOP('',(#320376,#320377,#320385,#320393)); +#320376 = ORIENTED_EDGE('',*,*,#320355,.T.); +#320377 = ORIENTED_EDGE('',*,*,#320378,.T.); +#320378 = EDGE_CURVE('',#320348,#320379,#320381,.T.); +#320379 = VERTEX_POINT('',#320380); +#320380 = CARTESIAN_POINT('',(148.472218,-114.833654,-3.5E-02)); +#320381 = LINE('',#320382,#320383); +#320382 = CARTESIAN_POINT('',(148.525,-114.855517,-3.5E-02)); +#320383 = VECTOR('',#320384,1.); +#320384 = DIRECTION('',(-0.923879657823,0.382683129836,0.)); +#320385 = ORIENTED_EDGE('',*,*,#320386,.F.); +#320386 = EDGE_CURVE('',#320387,#320379,#320389,.T.); +#320387 = VERTEX_POINT('',#320388); +#320388 = CARTESIAN_POINT('',(148.472218,-114.833654,0.)); +#320389 = LINE('',#320390,#320391); +#320390 = CARTESIAN_POINT('',(148.472218,-114.833654,0.)); +#320391 = VECTOR('',#320392,1.); +#320392 = DIRECTION('',(0.,0.,-1.)); +#320393 = ORIENTED_EDGE('',*,*,#320394,.F.); +#320394 = EDGE_CURVE('',#320356,#320387,#320395,.T.); +#320395 = LINE('',#320396,#320397); +#320396 = CARTESIAN_POINT('',(148.525,-114.855517,0.)); +#320397 = VECTOR('',#320398,1.); +#320398 = DIRECTION('',(-0.923879657823,0.382683129836,0.)); +#320399 = PLANE('',#320400); +#320400 = AXIS2_PLACEMENT_3D('',#320401,#320402,#320403); +#320401 = CARTESIAN_POINT('',(148.525,-114.855517,0.)); +#320402 = DIRECTION('',(0.382683129836,0.923879657823,0.)); +#320403 = DIRECTION('',(-0.923879657823,0.382683129836,0.)); +#320404 = ADVANCED_FACE('',(#320405),#320432,.T.); +#320405 = FACE_BOUND('',#320406,.F.); +#320406 = EDGE_LOOP('',(#320407,#320408,#320417,#320425)); +#320407 = ORIENTED_EDGE('',*,*,#320386,.T.); +#320408 = ORIENTED_EDGE('',*,*,#320409,.T.); +#320409 = EDGE_CURVE('',#320379,#320410,#320412,.T.); +#320410 = VERTEX_POINT('',#320411); +#320411 = CARTESIAN_POINT('',(148.291346,-114.652782,-3.5E-02)); +#320412 = CIRCLE('',#320413,1.031483080695); +#320413 = AXIS2_PLACEMENT_3D('',#320414,#320415,#320416); +#320414 = CARTESIAN_POINT('',(149.10552228683,-114.0194777131,-3.5E-02) + ); +#320415 = DIRECTION('',(0.,0.,-1.)); +#320416 = DIRECTION('',(-0.613974478772,-0.789325876566,-0.)); +#320417 = ORIENTED_EDGE('',*,*,#320418,.F.); +#320418 = EDGE_CURVE('',#320419,#320410,#320421,.T.); +#320419 = VERTEX_POINT('',#320420); +#320420 = CARTESIAN_POINT('',(148.291346,-114.652782,0.)); +#320421 = LINE('',#320422,#320423); +#320422 = CARTESIAN_POINT('',(148.291346,-114.652782,0.)); +#320423 = VECTOR('',#320424,1.); +#320424 = DIRECTION('',(0.,0.,-1.)); +#320425 = ORIENTED_EDGE('',*,*,#320426,.F.); +#320426 = EDGE_CURVE('',#320387,#320419,#320427,.T.); +#320427 = CIRCLE('',#320428,1.031483080695); +#320428 = AXIS2_PLACEMENT_3D('',#320429,#320430,#320431); +#320429 = CARTESIAN_POINT('',(149.10552228683,-114.0194777131,0.)); +#320430 = DIRECTION('',(0.,0.,-1.)); +#320431 = DIRECTION('',(-0.613974478772,-0.789325876566,-0.)); +#320432 = CYLINDRICAL_SURFACE('',#320433,1.031483080695); +#320433 = AXIS2_PLACEMENT_3D('',#320434,#320435,#320436); +#320434 = CARTESIAN_POINT('',(149.10552228683,-114.0194777131,0.)); +#320435 = DIRECTION('',(-0.,-0.,1.)); +#320436 = DIRECTION('',(-0.613974478772,-0.789325876566,-0.)); +#320437 = ADVANCED_FACE('',(#320438),#320463,.F.); +#320438 = FACE_BOUND('',#320439,.F.); +#320439 = EDGE_LOOP('',(#320440,#320441,#320449,#320457)); +#320440 = ORIENTED_EDGE('',*,*,#320418,.T.); +#320441 = ORIENTED_EDGE('',*,*,#320442,.T.); +#320442 = EDGE_CURVE('',#320410,#320443,#320445,.T.); +#320443 = VERTEX_POINT('',#320444); +#320444 = CARTESIAN_POINT('',(148.250284,-114.55365,-3.5E-02)); +#320445 = LINE('',#320446,#320447); +#320446 = CARTESIAN_POINT('',(148.291346,-114.652782,-3.5E-02)); +#320447 = VECTOR('',#320448,1.); +#320448 = DIRECTION('',(-0.382684873265,0.92387893567,0.)); +#320449 = ORIENTED_EDGE('',*,*,#320450,.F.); +#320450 = EDGE_CURVE('',#320451,#320443,#320453,.T.); +#320451 = VERTEX_POINT('',#320452); +#320452 = CARTESIAN_POINT('',(148.250284,-114.55365,0.)); +#320453 = LINE('',#320454,#320455); +#320454 = CARTESIAN_POINT('',(148.250284,-114.55365,0.)); +#320455 = VECTOR('',#320456,1.); +#320456 = DIRECTION('',(0.,0.,-1.)); +#320457 = ORIENTED_EDGE('',*,*,#320458,.F.); +#320458 = EDGE_CURVE('',#320419,#320451,#320459,.T.); +#320459 = LINE('',#320460,#320461); +#320460 = CARTESIAN_POINT('',(148.291346,-114.652782,0.)); +#320461 = VECTOR('',#320462,1.); +#320462 = DIRECTION('',(-0.382684873265,0.92387893567,0.)); +#320463 = PLANE('',#320464); +#320464 = AXIS2_PLACEMENT_3D('',#320465,#320466,#320467); +#320465 = CARTESIAN_POINT('',(148.291346,-114.652782,0.)); +#320466 = DIRECTION('',(0.92387893567,0.382684873265,0.)); +#320467 = DIRECTION('',(-0.382684873265,0.92387893567,0.)); +#320468 = ADVANCED_FACE('',(#320469),#320494,.F.); +#320469 = FACE_BOUND('',#320470,.F.); +#320470 = EDGE_LOOP('',(#320471,#320472,#320480,#320488)); +#320471 = ORIENTED_EDGE('',*,*,#320450,.T.); +#320472 = ORIENTED_EDGE('',*,*,#320473,.T.); +#320473 = EDGE_CURVE('',#320443,#320474,#320476,.T.); +#320474 = VERTEX_POINT('',#320475); +#320475 = CARTESIAN_POINT('',(148.250284,-114.44635,-3.5E-02)); +#320476 = LINE('',#320477,#320478); +#320477 = CARTESIAN_POINT('',(148.250284,-114.55365,-3.5E-02)); +#320478 = VECTOR('',#320479,1.); +#320479 = DIRECTION('',(0.,1.,0.)); +#320480 = ORIENTED_EDGE('',*,*,#320481,.F.); +#320481 = EDGE_CURVE('',#320482,#320474,#320484,.T.); +#320482 = VERTEX_POINT('',#320483); +#320483 = CARTESIAN_POINT('',(148.250284,-114.44635,0.)); +#320484 = LINE('',#320485,#320486); +#320485 = CARTESIAN_POINT('',(148.250284,-114.44635,0.)); +#320486 = VECTOR('',#320487,1.); +#320487 = DIRECTION('',(0.,0.,-1.)); +#320488 = ORIENTED_EDGE('',*,*,#320489,.F.); +#320489 = EDGE_CURVE('',#320451,#320482,#320490,.T.); +#320490 = LINE('',#320491,#320492); +#320491 = CARTESIAN_POINT('',(148.250284,-114.55365,0.)); +#320492 = VECTOR('',#320493,1.); +#320493 = DIRECTION('',(0.,1.,0.)); +#320494 = PLANE('',#320495); +#320495 = AXIS2_PLACEMENT_3D('',#320496,#320497,#320498); +#320496 = CARTESIAN_POINT('',(148.250284,-114.55365,0.)); +#320497 = DIRECTION('',(1.,-0.,0.)); +#320498 = DIRECTION('',(0.,1.,0.)); +#320499 = ADVANCED_FACE('',(#320500),#320525,.F.); +#320500 = FACE_BOUND('',#320501,.F.); +#320501 = EDGE_LOOP('',(#320502,#320503,#320511,#320519)); +#320502 = ORIENTED_EDGE('',*,*,#320481,.T.); +#320503 = ORIENTED_EDGE('',*,*,#320504,.T.); +#320504 = EDGE_CURVE('',#320474,#320505,#320507,.T.); +#320505 = VERTEX_POINT('',#320506); +#320506 = CARTESIAN_POINT('',(148.272146,-114.393568,-3.5E-02)); +#320507 = LINE('',#320508,#320509); +#320508 = CARTESIAN_POINT('',(148.250284,-114.44635,-3.5E-02)); +#320509 = VECTOR('',#320510,1.); +#320510 = DIRECTION('',(0.382668189349,0.923885846228,0.)); +#320511 = ORIENTED_EDGE('',*,*,#320512,.F.); +#320512 = EDGE_CURVE('',#320513,#320505,#320515,.T.); +#320513 = VERTEX_POINT('',#320514); +#320514 = CARTESIAN_POINT('',(148.272146,-114.393568,0.)); +#320515 = LINE('',#320516,#320517); +#320516 = CARTESIAN_POINT('',(148.272146,-114.393568,0.)); +#320517 = VECTOR('',#320518,1.); +#320518 = DIRECTION('',(0.,0.,-1.)); +#320519 = ORIENTED_EDGE('',*,*,#320520,.F.); +#320520 = EDGE_CURVE('',#320482,#320513,#320521,.T.); +#320521 = LINE('',#320522,#320523); +#320522 = CARTESIAN_POINT('',(148.250284,-114.44635,0.)); +#320523 = VECTOR('',#320524,1.); +#320524 = DIRECTION('',(0.382668189349,0.923885846228,0.)); +#320525 = PLANE('',#320526); +#320526 = AXIS2_PLACEMENT_3D('',#320527,#320528,#320529); +#320527 = CARTESIAN_POINT('',(148.250284,-114.44635,0.)); +#320528 = DIRECTION('',(0.923885846228,-0.382668189349,0.)); +#320529 = DIRECTION('',(0.382668189349,0.923885846228,0.)); +#320530 = ADVANCED_FACE('',(#320531),#320556,.F.); +#320531 = FACE_BOUND('',#320532,.F.); +#320532 = EDGE_LOOP('',(#320533,#320534,#320542,#320550)); +#320533 = ORIENTED_EDGE('',*,*,#320512,.T.); +#320534 = ORIENTED_EDGE('',*,*,#320535,.T.); +#320535 = EDGE_CURVE('',#320505,#320536,#320538,.T.); +#320536 = VERTEX_POINT('',#320537); +#320537 = CARTESIAN_POINT('',(147.858578,-113.98,-3.5E-02)); +#320538 = LINE('',#320539,#320540); +#320539 = CARTESIAN_POINT('',(148.272146,-114.393568,-3.5E-02)); +#320540 = VECTOR('',#320541,1.); +#320541 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#320542 = ORIENTED_EDGE('',*,*,#320543,.F.); +#320543 = EDGE_CURVE('',#320544,#320536,#320546,.T.); +#320544 = VERTEX_POINT('',#320545); +#320545 = CARTESIAN_POINT('',(147.858578,-113.98,0.)); +#320546 = LINE('',#320547,#320548); +#320547 = CARTESIAN_POINT('',(147.858578,-113.98,0.)); +#320548 = VECTOR('',#320549,1.); +#320549 = DIRECTION('',(0.,0.,-1.)); +#320550 = ORIENTED_EDGE('',*,*,#320551,.F.); +#320551 = EDGE_CURVE('',#320513,#320544,#320552,.T.); +#320552 = LINE('',#320553,#320554); +#320553 = CARTESIAN_POINT('',(148.272146,-114.393568,0.)); +#320554 = VECTOR('',#320555,1.); +#320555 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#320556 = PLANE('',#320557); +#320557 = AXIS2_PLACEMENT_3D('',#320558,#320559,#320560); +#320558 = CARTESIAN_POINT('',(148.272146,-114.393568,0.)); +#320559 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#320560 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#320561 = ADVANCED_FACE('',(#320562),#320587,.F.); +#320562 = FACE_BOUND('',#320563,.F.); +#320563 = EDGE_LOOP('',(#320564,#320565,#320573,#320581)); +#320564 = ORIENTED_EDGE('',*,*,#320543,.T.); +#320565 = ORIENTED_EDGE('',*,*,#320566,.T.); +#320566 = EDGE_CURVE('',#320536,#320567,#320569,.T.); +#320567 = VERTEX_POINT('',#320568); +#320568 = CARTESIAN_POINT('',(147.222498,-113.98,-3.5E-02)); +#320569 = LINE('',#320570,#320571); +#320570 = CARTESIAN_POINT('',(147.858578,-113.98,-3.5E-02)); +#320571 = VECTOR('',#320572,1.); +#320572 = DIRECTION('',(-1.,0.,0.)); +#320573 = ORIENTED_EDGE('',*,*,#320574,.F.); +#320574 = EDGE_CURVE('',#320575,#320567,#320577,.T.); +#320575 = VERTEX_POINT('',#320576); +#320576 = CARTESIAN_POINT('',(147.222498,-113.98,0.)); +#320577 = LINE('',#320578,#320579); +#320578 = CARTESIAN_POINT('',(147.222498,-113.98,0.)); +#320579 = VECTOR('',#320580,1.); +#320580 = DIRECTION('',(0.,0.,-1.)); +#320581 = ORIENTED_EDGE('',*,*,#320582,.F.); +#320582 = EDGE_CURVE('',#320544,#320575,#320583,.T.); +#320583 = LINE('',#320584,#320585); +#320584 = CARTESIAN_POINT('',(147.858578,-113.98,0.)); +#320585 = VECTOR('',#320586,1.); +#320586 = DIRECTION('',(-1.,0.,0.)); +#320587 = PLANE('',#320588); +#320588 = AXIS2_PLACEMENT_3D('',#320589,#320590,#320591); +#320589 = CARTESIAN_POINT('',(147.858578,-113.98,0.)); +#320590 = DIRECTION('',(0.,1.,0.)); +#320591 = DIRECTION('',(-1.,0.,0.)); +#320592 = ADVANCED_FACE('',(#320593),#320618,.F.); +#320593 = FACE_BOUND('',#320594,.F.); +#320594 = EDGE_LOOP('',(#320595,#320596,#320604,#320612)); +#320595 = ORIENTED_EDGE('',*,*,#320574,.T.); +#320596 = ORIENTED_EDGE('',*,*,#320597,.T.); +#320597 = EDGE_CURVE('',#320567,#320598,#320600,.T.); +#320598 = VERTEX_POINT('',#320599); +#320599 = CARTESIAN_POINT('',(147.03,-114.172498,-3.5E-02)); +#320600 = LINE('',#320601,#320602); +#320601 = CARTESIAN_POINT('',(147.222498,-113.98,-3.5E-02)); +#320602 = VECTOR('',#320603,1.); +#320603 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#320604 = ORIENTED_EDGE('',*,*,#320605,.F.); +#320605 = EDGE_CURVE('',#320606,#320598,#320608,.T.); +#320606 = VERTEX_POINT('',#320607); +#320607 = CARTESIAN_POINT('',(147.03,-114.172498,0.)); +#320608 = LINE('',#320609,#320610); +#320609 = CARTESIAN_POINT('',(147.03,-114.172498,0.)); +#320610 = VECTOR('',#320611,1.); +#320611 = DIRECTION('',(0.,0.,-1.)); +#320612 = ORIENTED_EDGE('',*,*,#320613,.F.); +#320613 = EDGE_CURVE('',#320575,#320606,#320614,.T.); +#320614 = LINE('',#320615,#320616); +#320615 = CARTESIAN_POINT('',(147.222498,-113.98,0.)); +#320616 = VECTOR('',#320617,1.); +#320617 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#320618 = PLANE('',#320619); +#320619 = AXIS2_PLACEMENT_3D('',#320620,#320621,#320622); +#320620 = CARTESIAN_POINT('',(147.222498,-113.98,0.)); +#320621 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#320622 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#320623 = ADVANCED_FACE('',(#320624),#320649,.F.); +#320624 = FACE_BOUND('',#320625,.F.); +#320625 = EDGE_LOOP('',(#320626,#320627,#320635,#320643)); +#320626 = ORIENTED_EDGE('',*,*,#320605,.T.); +#320627 = ORIENTED_EDGE('',*,*,#320628,.T.); +#320628 = EDGE_CURVE('',#320598,#320629,#320631,.T.); +#320629 = VERTEX_POINT('',#320630); +#320630 = CARTESIAN_POINT('',(147.028079,-117.390813,-3.5E-02)); +#320631 = LINE('',#320632,#320633); +#320632 = CARTESIAN_POINT('',(147.03,-114.172498,-3.5E-02)); +#320633 = VECTOR('',#320634,1.); +#320634 = DIRECTION('',(-5.96896095565E-04,-0.999999821858,0.)); +#320635 = ORIENTED_EDGE('',*,*,#320636,.F.); +#320636 = EDGE_CURVE('',#320637,#320629,#320639,.T.); +#320637 = VERTEX_POINT('',#320638); +#320638 = CARTESIAN_POINT('',(147.028079,-117.390813,0.)); +#320639 = LINE('',#320640,#320641); +#320640 = CARTESIAN_POINT('',(147.028079,-117.390813,0.)); +#320641 = VECTOR('',#320642,1.); +#320642 = DIRECTION('',(0.,0.,-1.)); +#320643 = ORIENTED_EDGE('',*,*,#320644,.F.); +#320644 = EDGE_CURVE('',#320606,#320637,#320645,.T.); +#320645 = LINE('',#320646,#320647); +#320646 = CARTESIAN_POINT('',(147.03,-114.172498,0.)); +#320647 = VECTOR('',#320648,1.); +#320648 = DIRECTION('',(-5.96896095565E-04,-0.999999821858,0.)); +#320649 = PLANE('',#320650); +#320650 = AXIS2_PLACEMENT_3D('',#320651,#320652,#320653); +#320651 = CARTESIAN_POINT('',(147.03,-114.172498,0.)); +#320652 = DIRECTION('',(-0.999999821858,5.96896095565E-04,0.)); +#320653 = DIRECTION('',(-5.96896095565E-04,-0.999999821858,0.)); +#320654 = ADVANCED_FACE('',(#320655),#320680,.F.); +#320655 = FACE_BOUND('',#320656,.F.); +#320656 = EDGE_LOOP('',(#320657,#320658,#320666,#320674)); +#320657 = ORIENTED_EDGE('',*,*,#320636,.T.); +#320658 = ORIENTED_EDGE('',*,*,#320659,.T.); +#320659 = EDGE_CURVE('',#320629,#320660,#320662,.T.); +#320660 = VERTEX_POINT('',#320661); +#320661 = CARTESIAN_POINT('',(147.013147,-117.426862,-3.5E-02)); +#320662 = LINE('',#320663,#320664); +#320663 = CARTESIAN_POINT('',(147.028079,-117.390813,-3.5E-02)); +#320664 = VECTOR('',#320665,1.); +#320665 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#320666 = ORIENTED_EDGE('',*,*,#320667,.F.); +#320667 = EDGE_CURVE('',#320668,#320660,#320670,.T.); +#320668 = VERTEX_POINT('',#320669); +#320669 = CARTESIAN_POINT('',(147.013147,-117.426862,0.)); +#320670 = LINE('',#320671,#320672); +#320671 = CARTESIAN_POINT('',(147.013147,-117.426862,0.)); +#320672 = VECTOR('',#320673,1.); +#320673 = DIRECTION('',(0.,0.,-1.)); +#320674 = ORIENTED_EDGE('',*,*,#320675,.F.); +#320675 = EDGE_CURVE('',#320637,#320668,#320676,.T.); +#320676 = LINE('',#320677,#320678); +#320677 = CARTESIAN_POINT('',(147.028079,-117.390813,0.)); +#320678 = VECTOR('',#320679,1.); +#320679 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#320680 = PLANE('',#320681); +#320681 = AXIS2_PLACEMENT_3D('',#320682,#320683,#320684); +#320682 = CARTESIAN_POINT('',(147.028079,-117.390813,0.)); +#320683 = DIRECTION('',(-0.923879393968,0.382683766837,0.)); +#320684 = DIRECTION('',(-0.382683766837,-0.923879393968,0.)); +#320685 = ADVANCED_FACE('',(#320686),#320711,.F.); +#320686 = FACE_BOUND('',#320687,.F.); +#320687 = EDGE_LOOP('',(#320688,#320689,#320697,#320705)); +#320688 = ORIENTED_EDGE('',*,*,#320667,.T.); +#320689 = ORIENTED_EDGE('',*,*,#320690,.T.); +#320690 = EDGE_CURVE('',#320660,#320691,#320693,.T.); +#320691 = VERTEX_POINT('',#320692); +#320692 = CARTESIAN_POINT('',(143.2,-121.242725,-3.5E-02)); +#320693 = LINE('',#320694,#320695); +#320694 = CARTESIAN_POINT('',(147.013147,-117.426862,-3.5E-02)); +#320695 = VECTOR('',#320696,1.); +#320696 = DIRECTION('',(-0.706854999664,-0.707358473089,0.)); +#320697 = ORIENTED_EDGE('',*,*,#320698,.F.); +#320698 = EDGE_CURVE('',#320699,#320691,#320701,.T.); +#320699 = VERTEX_POINT('',#320700); +#320700 = CARTESIAN_POINT('',(143.2,-121.242725,0.)); +#320701 = LINE('',#320702,#320703); +#320702 = CARTESIAN_POINT('',(143.2,-121.242725,0.)); +#320703 = VECTOR('',#320704,1.); +#320704 = DIRECTION('',(0.,0.,-1.)); +#320705 = ORIENTED_EDGE('',*,*,#320706,.F.); +#320706 = EDGE_CURVE('',#320668,#320699,#320707,.T.); +#320707 = LINE('',#320708,#320709); +#320708 = CARTESIAN_POINT('',(147.013147,-117.426862,0.)); +#320709 = VECTOR('',#320710,1.); +#320710 = DIRECTION('',(-0.706854999664,-0.707358473089,0.)); +#320711 = PLANE('',#320712); +#320712 = AXIS2_PLACEMENT_3D('',#320713,#320714,#320715); +#320713 = CARTESIAN_POINT('',(147.013147,-117.426862,0.)); +#320714 = DIRECTION('',(-0.707358473089,0.706854999664,0.)); +#320715 = DIRECTION('',(-0.706854999664,-0.707358473089,0.)); +#320716 = ADVANCED_FACE('',(#320717),#320742,.F.); +#320717 = FACE_BOUND('',#320718,.F.); +#320718 = EDGE_LOOP('',(#320719,#320720,#320728,#320736)); +#320719 = ORIENTED_EDGE('',*,*,#320698,.T.); +#320720 = ORIENTED_EDGE('',*,*,#320721,.T.); +#320721 = EDGE_CURVE('',#320691,#320722,#320724,.T.); +#320722 = VERTEX_POINT('',#320723); +#320723 = CARTESIAN_POINT('',(143.2,-123.85,-3.5E-02)); +#320724 = LINE('',#320725,#320726); +#320725 = CARTESIAN_POINT('',(143.2,-121.242725,-3.5E-02)); +#320726 = VECTOR('',#320727,1.); +#320727 = DIRECTION('',(0.,-1.,0.)); +#320728 = ORIENTED_EDGE('',*,*,#320729,.F.); +#320729 = EDGE_CURVE('',#320730,#320722,#320732,.T.); +#320730 = VERTEX_POINT('',#320731); +#320731 = CARTESIAN_POINT('',(143.2,-123.85,0.)); +#320732 = LINE('',#320733,#320734); +#320733 = CARTESIAN_POINT('',(143.2,-123.85,0.)); +#320734 = VECTOR('',#320735,1.); +#320735 = DIRECTION('',(0.,0.,-1.)); +#320736 = ORIENTED_EDGE('',*,*,#320737,.F.); +#320737 = EDGE_CURVE('',#320699,#320730,#320738,.T.); +#320738 = LINE('',#320739,#320740); +#320739 = CARTESIAN_POINT('',(143.2,-121.242725,0.)); +#320740 = VECTOR('',#320741,1.); +#320741 = DIRECTION('',(0.,-1.,0.)); +#320742 = PLANE('',#320743); +#320743 = AXIS2_PLACEMENT_3D('',#320744,#320745,#320746); +#320744 = CARTESIAN_POINT('',(143.2,-121.242725,0.)); +#320745 = DIRECTION('',(-1.,-0.,-0.)); +#320746 = DIRECTION('',(0.,-1.,0.)); +#320747 = ADVANCED_FACE('',(#320748),#320773,.F.); +#320748 = FACE_BOUND('',#320749,.F.); +#320749 = EDGE_LOOP('',(#320750,#320751,#320759,#320767)); +#320750 = ORIENTED_EDGE('',*,*,#320729,.T.); +#320751 = ORIENTED_EDGE('',*,*,#320752,.T.); +#320752 = EDGE_CURVE('',#320722,#320753,#320755,.T.); +#320753 = VERTEX_POINT('',#320754); +#320754 = CARTESIAN_POINT('',(143.419509,-123.851921,-3.5E-02)); +#320755 = LINE('',#320756,#320757); +#320756 = CARTESIAN_POINT('',(143.2,-123.85,-3.5E-02)); +#320757 = VECTOR('',#320758,1.); +#320758 = DIRECTION('',(0.999961709139,-8.751014506316E-03,0.)); +#320759 = ORIENTED_EDGE('',*,*,#320760,.F.); +#320760 = EDGE_CURVE('',#320761,#320753,#320763,.T.); +#320761 = VERTEX_POINT('',#320762); +#320762 = CARTESIAN_POINT('',(143.419509,-123.851921,0.)); +#320763 = LINE('',#320764,#320765); +#320764 = CARTESIAN_POINT('',(143.419509,-123.851921,0.)); +#320765 = VECTOR('',#320766,1.); +#320766 = DIRECTION('',(0.,0.,-1.)); +#320767 = ORIENTED_EDGE('',*,*,#320768,.F.); +#320768 = EDGE_CURVE('',#320730,#320761,#320769,.T.); +#320769 = LINE('',#320770,#320771); +#320770 = CARTESIAN_POINT('',(143.2,-123.85,0.)); +#320771 = VECTOR('',#320772,1.); +#320772 = DIRECTION('',(0.999961709139,-8.751014506316E-03,0.)); +#320773 = PLANE('',#320774); +#320774 = AXIS2_PLACEMENT_3D('',#320775,#320776,#320777); +#320775 = CARTESIAN_POINT('',(143.2,-123.85,0.)); +#320776 = DIRECTION('',(-8.751014506316E-03,-0.999961709139,-0.)); +#320777 = DIRECTION('',(0.999961709139,-8.751014506316E-03,0.)); +#320778 = ADVANCED_FACE('',(#320779),#320804,.F.); +#320779 = FACE_BOUND('',#320780,.F.); +#320780 = EDGE_LOOP('',(#320781,#320782,#320790,#320798)); +#320781 = ORIENTED_EDGE('',*,*,#320760,.T.); +#320782 = ORIENTED_EDGE('',*,*,#320783,.T.); +#320783 = EDGE_CURVE('',#320753,#320784,#320786,.T.); +#320784 = VERTEX_POINT('',#320785); +#320785 = CARTESIAN_POINT('',(143.455557,-123.866853,-3.5E-02)); +#320786 = LINE('',#320787,#320788); +#320787 = CARTESIAN_POINT('',(143.419509,-123.851921,-3.5E-02)); +#320788 = VECTOR('',#320789,1.); +#320789 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320790 = ORIENTED_EDGE('',*,*,#320791,.F.); +#320791 = EDGE_CURVE('',#320792,#320784,#320794,.T.); +#320792 = VERTEX_POINT('',#320793); +#320793 = CARTESIAN_POINT('',(143.455557,-123.866853,0.)); +#320794 = LINE('',#320795,#320796); +#320795 = CARTESIAN_POINT('',(143.455557,-123.866853,0.)); +#320796 = VECTOR('',#320797,1.); +#320797 = DIRECTION('',(0.,0.,-1.)); +#320798 = ORIENTED_EDGE('',*,*,#320799,.F.); +#320799 = EDGE_CURVE('',#320761,#320792,#320800,.T.); +#320800 = LINE('',#320801,#320802); +#320801 = CARTESIAN_POINT('',(143.419509,-123.851921,0.)); +#320802 = VECTOR('',#320803,1.); +#320803 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320804 = PLANE('',#320805); +#320805 = AXIS2_PLACEMENT_3D('',#320806,#320807,#320808); +#320806 = CARTESIAN_POINT('',(143.419509,-123.851921,0.)); +#320807 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#320808 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#320809 = ADVANCED_FACE('',(#320810),#320835,.F.); +#320810 = FACE_BOUND('',#320811,.F.); +#320811 = EDGE_LOOP('',(#320812,#320813,#320821,#320829)); +#320812 = ORIENTED_EDGE('',*,*,#320791,.T.); +#320813 = ORIENTED_EDGE('',*,*,#320814,.T.); +#320814 = EDGE_CURVE('',#320784,#320815,#320817,.T.); +#320815 = VERTEX_POINT('',#320816); +#320816 = CARTESIAN_POINT('',(143.471921,-123.880499,-3.5E-02)); +#320817 = LINE('',#320818,#320819); +#320818 = CARTESIAN_POINT('',(143.455557,-123.866853,-3.5E-02)); +#320819 = VECTOR('',#320820,1.); +#320820 = DIRECTION('',(0.768005807566,-0.64044287766,0.)); +#320821 = ORIENTED_EDGE('',*,*,#320822,.F.); +#320822 = EDGE_CURVE('',#320823,#320815,#320825,.T.); +#320823 = VERTEX_POINT('',#320824); +#320824 = CARTESIAN_POINT('',(143.471921,-123.880499,0.)); +#320825 = LINE('',#320826,#320827); +#320826 = CARTESIAN_POINT('',(143.471921,-123.880499,0.)); +#320827 = VECTOR('',#320828,1.); +#320828 = DIRECTION('',(0.,0.,-1.)); +#320829 = ORIENTED_EDGE('',*,*,#320830,.F.); +#320830 = EDGE_CURVE('',#320792,#320823,#320831,.T.); +#320831 = LINE('',#320832,#320833); +#320832 = CARTESIAN_POINT('',(143.455557,-123.866853,0.)); +#320833 = VECTOR('',#320834,1.); +#320834 = DIRECTION('',(0.768005807566,-0.64044287766,0.)); +#320835 = PLANE('',#320836); +#320836 = AXIS2_PLACEMENT_3D('',#320837,#320838,#320839); +#320837 = CARTESIAN_POINT('',(143.455557,-123.866853,0.)); +#320838 = DIRECTION('',(-0.64044287766,-0.768005807566,-0.)); +#320839 = DIRECTION('',(0.768005807566,-0.64044287766,0.)); +#320840 = ADVANCED_FACE('',(#320841),#320866,.F.); +#320841 = FACE_BOUND('',#320842,.F.); +#320842 = EDGE_LOOP('',(#320843,#320844,#320852,#320860)); +#320843 = ORIENTED_EDGE('',*,*,#320822,.T.); +#320844 = ORIENTED_EDGE('',*,*,#320845,.T.); +#320845 = EDGE_CURVE('',#320815,#320846,#320848,.T.); +#320846 = VERTEX_POINT('',#320847); +#320847 = CARTESIAN_POINT('',(143.485195,-123.872836,-3.5E-02)); +#320848 = LINE('',#320849,#320850); +#320849 = CARTESIAN_POINT('',(143.471921,-123.880499,-3.5E-02)); +#320850 = VECTOR('',#320851,1.); +#320851 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#320852 = ORIENTED_EDGE('',*,*,#320853,.F.); +#320853 = EDGE_CURVE('',#320854,#320846,#320856,.T.); +#320854 = VERTEX_POINT('',#320855); +#320855 = CARTESIAN_POINT('',(143.485195,-123.872836,0.)); +#320856 = LINE('',#320857,#320858); +#320857 = CARTESIAN_POINT('',(143.485195,-123.872836,0.)); +#320858 = VECTOR('',#320859,1.); +#320859 = DIRECTION('',(0.,0.,-1.)); +#320860 = ORIENTED_EDGE('',*,*,#320861,.F.); +#320861 = EDGE_CURVE('',#320823,#320854,#320862,.T.); +#320862 = LINE('',#320863,#320864); +#320863 = CARTESIAN_POINT('',(143.471921,-123.880499,0.)); +#320864 = VECTOR('',#320865,1.); +#320865 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#320866 = PLANE('',#320867); +#320867 = AXIS2_PLACEMENT_3D('',#320868,#320869,#320870); +#320868 = CARTESIAN_POINT('',(143.471921,-123.880499,0.)); +#320869 = DIRECTION('',(0.499963423545,-0.866046520181,0.)); +#320870 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#320871 = ADVANCED_FACE('',(#320872),#320899,.T.); +#320872 = FACE_BOUND('',#320873,.F.); +#320873 = EDGE_LOOP('',(#320874,#320875,#320884,#320892)); +#320874 = ORIENTED_EDGE('',*,*,#320853,.T.); +#320875 = ORIENTED_EDGE('',*,*,#320876,.T.); +#320876 = EDGE_CURVE('',#320846,#320877,#320879,.T.); +#320877 = VERTEX_POINT('',#320878); +#320878 = CARTESIAN_POINT('',(143.302567,-124.110842,-3.5E-02)); +#320879 = CIRCLE('',#320880,0.299999792981); +#320880 = AXIS2_PLACEMENT_3D('',#320881,#320882,#320883); +#320881 = CARTESIAN_POINT('',(143.6000002932,-124.1499995265,-3.5E-02)); +#320882 = DIRECTION('',(-0.,0.,-1.)); +#320883 = DIRECTION('',(-0.382684574746,0.923879059321,0.)); +#320884 = ORIENTED_EDGE('',*,*,#320885,.F.); +#320885 = EDGE_CURVE('',#320886,#320877,#320888,.T.); +#320886 = VERTEX_POINT('',#320887); +#320887 = CARTESIAN_POINT('',(143.302567,-124.110842,0.)); +#320888 = LINE('',#320889,#320890); +#320889 = CARTESIAN_POINT('',(143.302567,-124.110842,0.)); +#320890 = VECTOR('',#320891,1.); +#320891 = DIRECTION('',(0.,0.,-1.)); +#320892 = ORIENTED_EDGE('',*,*,#320893,.F.); +#320893 = EDGE_CURVE('',#320854,#320886,#320894,.T.); +#320894 = CIRCLE('',#320895,0.299999792981); +#320895 = AXIS2_PLACEMENT_3D('',#320896,#320897,#320898); +#320896 = CARTESIAN_POINT('',(143.6000002932,-124.1499995265,0.)); +#320897 = DIRECTION('',(-0.,0.,-1.)); +#320898 = DIRECTION('',(-0.382684574746,0.923879059321,0.)); +#320899 = CYLINDRICAL_SURFACE('',#320900,0.299999792981); +#320900 = AXIS2_PLACEMENT_3D('',#320901,#320902,#320903); +#320901 = CARTESIAN_POINT('',(143.6000002932,-124.1499995265,0.)); +#320902 = DIRECTION('',(0.,-0.,1.)); +#320903 = DIRECTION('',(-0.382684574746,0.923879059321,0.)); +#320904 = ADVANCED_FACE('',(#320905),#320930,.F.); +#320905 = FACE_BOUND('',#320906,.F.); +#320906 = EDGE_LOOP('',(#320907,#320908,#320916,#320924)); +#320907 = ORIENTED_EDGE('',*,*,#320885,.T.); +#320908 = ORIENTED_EDGE('',*,*,#320909,.T.); +#320909 = EDGE_CURVE('',#320877,#320910,#320912,.T.); +#320910 = VERTEX_POINT('',#320911); +#320911 = CARTESIAN_POINT('',(143.318869,-124.05,-3.5E-02)); +#320912 = LINE('',#320913,#320914); +#320913 = CARTESIAN_POINT('',(143.302567,-124.110842,-3.5E-02)); +#320914 = VECTOR('',#320915,1.); +#320915 = DIRECTION('',(0.258810679488,0.96592806781,0.)); +#320916 = ORIENTED_EDGE('',*,*,#320917,.F.); +#320917 = EDGE_CURVE('',#320918,#320910,#320920,.T.); +#320918 = VERTEX_POINT('',#320919); +#320919 = CARTESIAN_POINT('',(143.318869,-124.05,0.)); +#320920 = LINE('',#320921,#320922); +#320921 = CARTESIAN_POINT('',(143.318869,-124.05,0.)); +#320922 = VECTOR('',#320923,1.); +#320923 = DIRECTION('',(0.,0.,-1.)); +#320924 = ORIENTED_EDGE('',*,*,#320925,.F.); +#320925 = EDGE_CURVE('',#320886,#320918,#320926,.T.); +#320926 = LINE('',#320927,#320928); +#320927 = CARTESIAN_POINT('',(143.302567,-124.110842,0.)); +#320928 = VECTOR('',#320929,1.); +#320929 = DIRECTION('',(0.258810679488,0.96592806781,0.)); +#320930 = PLANE('',#320931); +#320931 = AXIS2_PLACEMENT_3D('',#320932,#320933,#320934); +#320932 = CARTESIAN_POINT('',(143.302567,-124.110842,0.)); +#320933 = DIRECTION('',(0.96592806781,-0.258810679488,0.)); +#320934 = DIRECTION('',(0.258810679488,0.96592806781,0.)); +#320935 = ADVANCED_FACE('',(#320936),#320961,.F.); +#320936 = FACE_BOUND('',#320937,.F.); +#320937 = EDGE_LOOP('',(#320938,#320939,#320947,#320955)); +#320938 = ORIENTED_EDGE('',*,*,#320917,.T.); +#320939 = ORIENTED_EDGE('',*,*,#320940,.T.); +#320940 = EDGE_CURVE('',#320910,#320941,#320943,.T.); +#320941 = VERTEX_POINT('',#320942); +#320942 = CARTESIAN_POINT('',(143.080491,-124.048079,-3.5E-02)); +#320943 = LINE('',#320944,#320945); +#320944 = CARTESIAN_POINT('',(143.318869,-124.05,-3.5E-02)); +#320945 = VECTOR('',#320946,1.); +#320946 = DIRECTION('',(-0.999967530826,8.058367914459E-03,0.)); +#320947 = ORIENTED_EDGE('',*,*,#320948,.F.); +#320948 = EDGE_CURVE('',#320949,#320941,#320951,.T.); +#320949 = VERTEX_POINT('',#320950); +#320950 = CARTESIAN_POINT('',(143.080491,-124.048079,0.)); +#320951 = LINE('',#320952,#320953); +#320952 = CARTESIAN_POINT('',(143.080491,-124.048079,0.)); +#320953 = VECTOR('',#320954,1.); +#320954 = DIRECTION('',(0.,0.,-1.)); +#320955 = ORIENTED_EDGE('',*,*,#320956,.F.); +#320956 = EDGE_CURVE('',#320918,#320949,#320957,.T.); +#320957 = LINE('',#320958,#320959); +#320958 = CARTESIAN_POINT('',(143.318869,-124.05,0.)); +#320959 = VECTOR('',#320960,1.); +#320960 = DIRECTION('',(-0.999967530826,8.058367914459E-03,0.)); +#320961 = PLANE('',#320962); +#320962 = AXIS2_PLACEMENT_3D('',#320963,#320964,#320965); +#320963 = CARTESIAN_POINT('',(143.318869,-124.05,0.)); +#320964 = DIRECTION('',(8.058367914459E-03,0.999967530826,0.)); +#320965 = DIRECTION('',(-0.999967530826,8.058367914459E-03,0.)); +#320966 = ADVANCED_FACE('',(#320967),#320994,.T.); +#320967 = FACE_BOUND('',#320968,.F.); +#320968 = EDGE_LOOP('',(#320969,#320970,#320979,#320987)); +#320969 = ORIENTED_EDGE('',*,*,#320948,.T.); +#320970 = ORIENTED_EDGE('',*,*,#320971,.T.); +#320971 = EDGE_CURVE('',#320941,#320972,#320974,.T.); +#320972 = VERTEX_POINT('',#320973); +#320973 = CARTESIAN_POINT('',(143.001921,-123.969509,-3.5E-02)); +#320974 = CIRCLE('',#320975,0.100002891901); +#320975 = AXIS2_PLACEMENT_3D('',#320976,#320977,#320978); +#320976 = CARTESIAN_POINT('',(143.10000207103,-123.9499979289,-3.5E-02) + ); +#320977 = DIRECTION('',(0.,0.,-1.)); +#320978 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#320979 = ORIENTED_EDGE('',*,*,#320980,.F.); +#320980 = EDGE_CURVE('',#320981,#320972,#320983,.T.); +#320981 = VERTEX_POINT('',#320982); +#320982 = CARTESIAN_POINT('',(143.001921,-123.969509,0.)); +#320983 = LINE('',#320984,#320985); +#320984 = CARTESIAN_POINT('',(143.001921,-123.969509,0.)); +#320985 = VECTOR('',#320986,1.); +#320986 = DIRECTION('',(0.,0.,-1.)); +#320987 = ORIENTED_EDGE('',*,*,#320988,.F.); +#320988 = EDGE_CURVE('',#320949,#320981,#320989,.T.); +#320989 = CIRCLE('',#320990,0.100002891901); +#320990 = AXIS2_PLACEMENT_3D('',#320991,#320992,#320993); +#320991 = CARTESIAN_POINT('',(143.10000207103,-123.9499979289,0.)); +#320992 = DIRECTION('',(0.,0.,-1.)); +#320993 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#320994 = CYLINDRICAL_SURFACE('',#320995,0.100002891901); +#320995 = AXIS2_PLACEMENT_3D('',#320996,#320997,#320998); +#320996 = CARTESIAN_POINT('',(143.10000207103,-123.9499979289,0.)); +#320997 = DIRECTION('',(-0.,-0.,1.)); +#320998 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#320999 = ADVANCED_FACE('',(#321000),#321025,.F.); +#321000 = FACE_BOUND('',#321001,.F.); +#321001 = EDGE_LOOP('',(#321002,#321003,#321011,#321019)); +#321002 = ORIENTED_EDGE('',*,*,#320980,.T.); +#321003 = ORIENTED_EDGE('',*,*,#321004,.T.); +#321004 = EDGE_CURVE('',#320972,#321005,#321007,.T.); +#321005 = VERTEX_POINT('',#321006); +#321006 = CARTESIAN_POINT('',(143.001921,-121.181795,-3.5E-02)); +#321007 = LINE('',#321008,#321009); +#321008 = CARTESIAN_POINT('',(143.001921,-123.969509,-3.5E-02)); +#321009 = VECTOR('',#321010,1.); +#321010 = DIRECTION('',(0.,1.,0.)); +#321011 = ORIENTED_EDGE('',*,*,#321012,.F.); +#321012 = EDGE_CURVE('',#321013,#321005,#321015,.T.); +#321013 = VERTEX_POINT('',#321014); +#321014 = CARTESIAN_POINT('',(143.001921,-121.181795,0.)); +#321015 = LINE('',#321016,#321017); +#321016 = CARTESIAN_POINT('',(143.001921,-121.181795,0.)); +#321017 = VECTOR('',#321018,1.); +#321018 = DIRECTION('',(0.,0.,-1.)); +#321019 = ORIENTED_EDGE('',*,*,#321020,.F.); +#321020 = EDGE_CURVE('',#320981,#321013,#321021,.T.); +#321021 = LINE('',#321022,#321023); +#321022 = CARTESIAN_POINT('',(143.001921,-123.969509,0.)); +#321023 = VECTOR('',#321024,1.); +#321024 = DIRECTION('',(0.,1.,0.)); +#321025 = PLANE('',#321026); +#321026 = AXIS2_PLACEMENT_3D('',#321027,#321028,#321029); +#321027 = CARTESIAN_POINT('',(143.001921,-123.969509,0.)); +#321028 = DIRECTION('',(1.,-0.,0.)); +#321029 = DIRECTION('',(0.,1.,0.)); +#321030 = ADVANCED_FACE('',(#321031),#321056,.F.); +#321031 = FACE_BOUND('',#321032,.F.); +#321032 = EDGE_LOOP('',(#321033,#321034,#321042,#321050)); +#321033 = ORIENTED_EDGE('',*,*,#321012,.T.); +#321034 = ORIENTED_EDGE('',*,*,#321035,.T.); +#321035 = EDGE_CURVE('',#321005,#321036,#321038,.T.); +#321036 = VERTEX_POINT('',#321037); +#321037 = CARTESIAN_POINT('',(143.016853,-121.145747,-3.5E-02)); +#321038 = LINE('',#321039,#321040); +#321039 = CARTESIAN_POINT('',(143.001921,-121.181795,-3.5E-02)); +#321040 = VECTOR('',#321041,1.); +#321041 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321042 = ORIENTED_EDGE('',*,*,#321043,.F.); +#321043 = EDGE_CURVE('',#321044,#321036,#321046,.T.); +#321044 = VERTEX_POINT('',#321045); +#321045 = CARTESIAN_POINT('',(143.016853,-121.145747,0.)); +#321046 = LINE('',#321047,#321048); +#321047 = CARTESIAN_POINT('',(143.016853,-121.145747,0.)); +#321048 = VECTOR('',#321049,1.); +#321049 = DIRECTION('',(0.,0.,-1.)); +#321050 = ORIENTED_EDGE('',*,*,#321051,.F.); +#321051 = EDGE_CURVE('',#321013,#321044,#321052,.T.); +#321052 = LINE('',#321053,#321054); +#321053 = CARTESIAN_POINT('',(143.001921,-121.181795,0.)); +#321054 = VECTOR('',#321055,1.); +#321055 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321056 = PLANE('',#321057); +#321057 = AXIS2_PLACEMENT_3D('',#321058,#321059,#321060); +#321058 = CARTESIAN_POINT('',(143.001921,-121.181795,0.)); +#321059 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#321060 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321061 = ADVANCED_FACE('',(#321062),#321087,.F.); +#321062 = FACE_BOUND('',#321063,.F.); +#321063 = EDGE_LOOP('',(#321064,#321065,#321073,#321081)); +#321064 = ORIENTED_EDGE('',*,*,#321043,.T.); +#321065 = ORIENTED_EDGE('',*,*,#321066,.T.); +#321066 = EDGE_CURVE('',#321036,#321067,#321069,.T.); +#321067 = VERTEX_POINT('',#321068); +#321068 = CARTESIAN_POINT('',(143.35923,-120.800651,-3.5E-02)); +#321069 = LINE('',#321070,#321071); +#321070 = CARTESIAN_POINT('',(143.016853,-121.145747,-3.5E-02)); +#321071 = VECTOR('',#321072,1.); +#321072 = DIRECTION('',(0.704304619784,0.709897881777,0.)); +#321073 = ORIENTED_EDGE('',*,*,#321074,.F.); +#321074 = EDGE_CURVE('',#321075,#321067,#321077,.T.); +#321075 = VERTEX_POINT('',#321076); +#321076 = CARTESIAN_POINT('',(143.35923,-120.800651,0.)); +#321077 = LINE('',#321078,#321079); +#321078 = CARTESIAN_POINT('',(143.35923,-120.800651,0.)); +#321079 = VECTOR('',#321080,1.); +#321080 = DIRECTION('',(0.,0.,-1.)); +#321081 = ORIENTED_EDGE('',*,*,#321082,.F.); +#321082 = EDGE_CURVE('',#321044,#321075,#321083,.T.); +#321083 = LINE('',#321084,#321085); +#321084 = CARTESIAN_POINT('',(143.016853,-121.145747,0.)); +#321085 = VECTOR('',#321086,1.); +#321086 = DIRECTION('',(0.704304619784,0.709897881777,0.)); +#321087 = PLANE('',#321088); +#321088 = AXIS2_PLACEMENT_3D('',#321089,#321090,#321091); +#321089 = CARTESIAN_POINT('',(143.016853,-121.145747,0.)); +#321090 = DIRECTION('',(0.709897881777,-0.704304619784,0.)); +#321091 = DIRECTION('',(0.704304619784,0.709897881777,0.)); +#321092 = ADVANCED_FACE('',(#321093),#321118,.F.); +#321093 = FACE_BOUND('',#321094,.F.); +#321094 = EDGE_LOOP('',(#321095,#321096,#321104,#321112)); +#321095 = ORIENTED_EDGE('',*,*,#321074,.T.); +#321096 = ORIENTED_EDGE('',*,*,#321097,.T.); +#321097 = EDGE_CURVE('',#321067,#321098,#321100,.T.); +#321098 = VERTEX_POINT('',#321099); +#321099 = CARTESIAN_POINT('',(142.328078,-119.7695,-3.5E-02)); +#321100 = LINE('',#321101,#321102); +#321101 = CARTESIAN_POINT('',(143.35923,-120.800651,-3.5E-02)); +#321102 = VECTOR('',#321103,1.); +#321103 = DIRECTION('',(-0.707107124059,0.707106438314,0.)); +#321104 = ORIENTED_EDGE('',*,*,#321105,.F.); +#321105 = EDGE_CURVE('',#321106,#321098,#321108,.T.); +#321106 = VERTEX_POINT('',#321107); +#321107 = CARTESIAN_POINT('',(142.328078,-119.7695,0.)); +#321108 = LINE('',#321109,#321110); +#321109 = CARTESIAN_POINT('',(142.328078,-119.7695,0.)); +#321110 = VECTOR('',#321111,1.); +#321111 = DIRECTION('',(0.,0.,-1.)); +#321112 = ORIENTED_EDGE('',*,*,#321113,.F.); +#321113 = EDGE_CURVE('',#321075,#321106,#321114,.T.); +#321114 = LINE('',#321115,#321116); +#321115 = CARTESIAN_POINT('',(143.35923,-120.800651,0.)); +#321116 = VECTOR('',#321117,1.); +#321117 = DIRECTION('',(-0.707107124059,0.707106438314,0.)); +#321118 = PLANE('',#321119); +#321119 = AXIS2_PLACEMENT_3D('',#321120,#321121,#321122); +#321120 = CARTESIAN_POINT('',(143.35923,-120.800651,0.)); +#321121 = DIRECTION('',(0.707106438314,0.707107124059,0.)); +#321122 = DIRECTION('',(-0.707107124059,0.707106438314,0.)); +#321123 = ADVANCED_FACE('',(#321124),#321149,.F.); +#321124 = FACE_BOUND('',#321125,.F.); +#321125 = EDGE_LOOP('',(#321126,#321127,#321135,#321143)); +#321126 = ORIENTED_EDGE('',*,*,#321105,.T.); +#321127 = ORIENTED_EDGE('',*,*,#321128,.T.); +#321128 = EDGE_CURVE('',#321098,#321129,#321131,.T.); +#321129 = VERTEX_POINT('',#321130); +#321130 = CARTESIAN_POINT('',(142.314805,-119.777164,-3.5E-02)); +#321131 = LINE('',#321132,#321133); +#321132 = CARTESIAN_POINT('',(142.328078,-119.7695,-3.5E-02)); +#321133 = VECTOR('',#321134,1.); +#321134 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#321135 = ORIENTED_EDGE('',*,*,#321136,.F.); +#321136 = EDGE_CURVE('',#321137,#321129,#321139,.T.); +#321137 = VERTEX_POINT('',#321138); +#321138 = CARTESIAN_POINT('',(142.314805,-119.777164,0.)); +#321139 = LINE('',#321140,#321141); +#321140 = CARTESIAN_POINT('',(142.314805,-119.777164,0.)); +#321141 = VECTOR('',#321142,1.); +#321142 = DIRECTION('',(0.,0.,-1.)); +#321143 = ORIENTED_EDGE('',*,*,#321144,.F.); +#321144 = EDGE_CURVE('',#321106,#321137,#321145,.T.); +#321145 = LINE('',#321146,#321147); +#321146 = CARTESIAN_POINT('',(142.328078,-119.7695,0.)); +#321147 = VECTOR('',#321148,1.); +#321148 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#321149 = PLANE('',#321150); +#321150 = AXIS2_PLACEMENT_3D('',#321151,#321152,#321153); +#321151 = CARTESIAN_POINT('',(142.328078,-119.7695,0.)); +#321152 = DIRECTION('',(-0.500040608684,0.86600195708,0.)); +#321153 = DIRECTION('',(-0.86600195708,-0.500040608684,0.)); +#321154 = ADVANCED_FACE('',(#321155),#321182,.T.); +#321155 = FACE_BOUND('',#321156,.F.); +#321156 = EDGE_LOOP('',(#321157,#321158,#321167,#321175)); +#321157 = ORIENTED_EDGE('',*,*,#321136,.T.); +#321158 = ORIENTED_EDGE('',*,*,#321159,.T.); +#321159 = EDGE_CURVE('',#321129,#321160,#321162,.T.); +#321160 = VERTEX_POINT('',#321161); +#321161 = CARTESIAN_POINT('',(142.477164,-119.614805,-3.5E-02)); +#321162 = CIRCLE('',#321163,0.299999934501); +#321163 = AXIS2_PLACEMENT_3D('',#321164,#321165,#321166); +#321164 = CARTESIAN_POINT('',(142.20000014059,-119.5000001405,-3.5E-02) + ); +#321165 = DIRECTION('',(0.,0.,-1.)); +#321166 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#321167 = ORIENTED_EDGE('',*,*,#321168,.F.); +#321168 = EDGE_CURVE('',#321169,#321160,#321171,.T.); +#321169 = VERTEX_POINT('',#321170); +#321170 = CARTESIAN_POINT('',(142.477164,-119.614805,0.)); +#321171 = LINE('',#321172,#321173); +#321172 = CARTESIAN_POINT('',(142.477164,-119.614805,0.)); +#321173 = VECTOR('',#321174,1.); +#321174 = DIRECTION('',(0.,0.,-1.)); +#321175 = ORIENTED_EDGE('',*,*,#321176,.F.); +#321176 = EDGE_CURVE('',#321137,#321169,#321177,.T.); +#321177 = CIRCLE('',#321178,0.299999934501); +#321178 = AXIS2_PLACEMENT_3D('',#321179,#321180,#321181); +#321179 = CARTESIAN_POINT('',(142.20000014059,-119.5000001405,0.)); +#321180 = DIRECTION('',(0.,0.,-1.)); +#321181 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#321182 = CYLINDRICAL_SURFACE('',#321183,0.299999934501); +#321183 = AXIS2_PLACEMENT_3D('',#321184,#321185,#321186); +#321184 = CARTESIAN_POINT('',(142.20000014059,-119.5000001405,0.)); +#321185 = DIRECTION('',(-0.,-0.,1.)); +#321186 = DIRECTION('',(0.382682948223,-0.923879733049,0.)); +#321187 = ADVANCED_FACE('',(#321188),#321213,.F.); +#321188 = FACE_BOUND('',#321189,.F.); +#321189 = EDGE_LOOP('',(#321190,#321191,#321199,#321207)); +#321190 = ORIENTED_EDGE('',*,*,#321168,.T.); +#321191 = ORIENTED_EDGE('',*,*,#321192,.T.); +#321192 = EDGE_CURVE('',#321160,#321193,#321195,.T.); +#321193 = VERTEX_POINT('',#321194); +#321194 = CARTESIAN_POINT('',(142.4695,-119.628078,-3.5E-02)); +#321195 = LINE('',#321196,#321197); +#321196 = CARTESIAN_POINT('',(142.477164,-119.614805,-3.5E-02)); +#321197 = VECTOR('',#321198,1.); +#321198 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#321199 = ORIENTED_EDGE('',*,*,#321200,.F.); +#321200 = EDGE_CURVE('',#321201,#321193,#321203,.T.); +#321201 = VERTEX_POINT('',#321202); +#321202 = CARTESIAN_POINT('',(142.4695,-119.628078,0.)); +#321203 = LINE('',#321204,#321205); +#321204 = CARTESIAN_POINT('',(142.4695,-119.628078,0.)); +#321205 = VECTOR('',#321206,1.); +#321206 = DIRECTION('',(0.,0.,-1.)); +#321207 = ORIENTED_EDGE('',*,*,#321208,.F.); +#321208 = EDGE_CURVE('',#321169,#321201,#321209,.T.); +#321209 = LINE('',#321210,#321211); +#321210 = CARTESIAN_POINT('',(142.477164,-119.614805,0.)); +#321211 = VECTOR('',#321212,1.); +#321212 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#321213 = PLANE('',#321214); +#321214 = AXIS2_PLACEMENT_3D('',#321215,#321216,#321217); +#321215 = CARTESIAN_POINT('',(142.477164,-119.614805,0.)); +#321216 = DIRECTION('',(-0.866001957081,0.500040608683,0.)); +#321217 = DIRECTION('',(-0.500040608683,-0.866001957081,0.)); +#321218 = ADVANCED_FACE('',(#321219),#321244,.F.); +#321219 = FACE_BOUND('',#321220,.F.); +#321220 = EDGE_LOOP('',(#321221,#321222,#321230,#321238)); +#321221 = ORIENTED_EDGE('',*,*,#321200,.T.); +#321222 = ORIENTED_EDGE('',*,*,#321223,.T.); +#321223 = EDGE_CURVE('',#321193,#321224,#321226,.T.); +#321224 = VERTEX_POINT('',#321225); +#321225 = CARTESIAN_POINT('',(143.500651,-120.65923,-3.5E-02)); +#321226 = LINE('',#321227,#321228); +#321227 = CARTESIAN_POINT('',(142.4695,-119.628078,-3.5E-02)); +#321228 = VECTOR('',#321229,1.); +#321229 = DIRECTION('',(0.707106438314,-0.707107124059,0.)); +#321230 = ORIENTED_EDGE('',*,*,#321231,.F.); +#321231 = EDGE_CURVE('',#321232,#321224,#321234,.T.); +#321232 = VERTEX_POINT('',#321233); +#321233 = CARTESIAN_POINT('',(143.500651,-120.65923,0.)); +#321234 = LINE('',#321235,#321236); +#321235 = CARTESIAN_POINT('',(143.500651,-120.65923,0.)); +#321236 = VECTOR('',#321237,1.); +#321237 = DIRECTION('',(0.,0.,-1.)); +#321238 = ORIENTED_EDGE('',*,*,#321239,.F.); +#321239 = EDGE_CURVE('',#321201,#321232,#321240,.T.); +#321240 = LINE('',#321241,#321242); +#321241 = CARTESIAN_POINT('',(142.4695,-119.628078,0.)); +#321242 = VECTOR('',#321243,1.); +#321243 = DIRECTION('',(0.707106438314,-0.707107124059,0.)); +#321244 = PLANE('',#321245); +#321245 = AXIS2_PLACEMENT_3D('',#321246,#321247,#321248); +#321246 = CARTESIAN_POINT('',(142.4695,-119.628078,0.)); +#321247 = DIRECTION('',(-0.707107124059,-0.707106438314,-0.)); +#321248 = DIRECTION('',(0.707106438314,-0.707107124059,0.)); +#321249 = ADVANCED_FACE('',(#321250),#321275,.F.); +#321250 = FACE_BOUND('',#321251,.F.); +#321251 = EDGE_LOOP('',(#321252,#321253,#321261,#321269)); +#321252 = ORIENTED_EDGE('',*,*,#321231,.T.); +#321253 = ORIENTED_EDGE('',*,*,#321254,.T.); +#321254 = EDGE_CURVE('',#321224,#321255,#321257,.T.); +#321255 = VERTEX_POINT('',#321256); +#321256 = CARTESIAN_POINT('',(146.83,-117.329882,-3.5E-02)); +#321257 = LINE('',#321258,#321259); +#321258 = CARTESIAN_POINT('',(143.500651,-120.65923,-3.5E-02)); +#321259 = VECTOR('',#321260,1.); +#321260 = DIRECTION('',(0.70710688738,0.707106674994,0.)); +#321261 = ORIENTED_EDGE('',*,*,#321262,.F.); +#321262 = EDGE_CURVE('',#321263,#321255,#321265,.T.); +#321263 = VERTEX_POINT('',#321264); +#321264 = CARTESIAN_POINT('',(146.83,-117.329882,0.)); +#321265 = LINE('',#321266,#321267); +#321266 = CARTESIAN_POINT('',(146.83,-117.329882,0.)); +#321267 = VECTOR('',#321268,1.); +#321268 = DIRECTION('',(0.,0.,-1.)); +#321269 = ORIENTED_EDGE('',*,*,#321270,.F.); +#321270 = EDGE_CURVE('',#321232,#321263,#321271,.T.); +#321271 = LINE('',#321272,#321273); +#321272 = CARTESIAN_POINT('',(143.500651,-120.65923,0.)); +#321273 = VECTOR('',#321274,1.); +#321274 = DIRECTION('',(0.70710688738,0.707106674994,0.)); +#321275 = PLANE('',#321276); +#321276 = AXIS2_PLACEMENT_3D('',#321277,#321278,#321279); +#321277 = CARTESIAN_POINT('',(143.500651,-120.65923,0.)); +#321278 = DIRECTION('',(0.707106674994,-0.70710688738,0.)); +#321279 = DIRECTION('',(0.70710688738,0.707106674994,0.)); +#321280 = ADVANCED_FACE('',(#321281),#321306,.F.); +#321281 = FACE_BOUND('',#321282,.F.); +#321282 = EDGE_LOOP('',(#321283,#321284,#321292,#321300)); +#321283 = ORIENTED_EDGE('',*,*,#321262,.T.); +#321284 = ORIENTED_EDGE('',*,*,#321285,.T.); +#321285 = EDGE_CURVE('',#321255,#321286,#321288,.T.); +#321286 = VERTEX_POINT('',#321287); +#321287 = CARTESIAN_POINT('',(146.831921,-114.111567,-3.5E-02)); +#321288 = LINE('',#321289,#321290); +#321289 = CARTESIAN_POINT('',(146.83,-117.329882,-3.5E-02)); +#321290 = VECTOR('',#321291,1.); +#321291 = DIRECTION('',(5.968960955562E-04,0.999999821858,0.)); +#321292 = ORIENTED_EDGE('',*,*,#321293,.F.); +#321293 = EDGE_CURVE('',#321294,#321286,#321296,.T.); +#321294 = VERTEX_POINT('',#321295); +#321295 = CARTESIAN_POINT('',(146.831921,-114.111567,0.)); +#321296 = LINE('',#321297,#321298); +#321297 = CARTESIAN_POINT('',(146.831921,-114.111567,0.)); +#321298 = VECTOR('',#321299,1.); +#321299 = DIRECTION('',(0.,0.,-1.)); +#321300 = ORIENTED_EDGE('',*,*,#321301,.F.); +#321301 = EDGE_CURVE('',#321263,#321294,#321302,.T.); +#321302 = LINE('',#321303,#321304); +#321303 = CARTESIAN_POINT('',(146.83,-117.329882,0.)); +#321304 = VECTOR('',#321305,1.); +#321305 = DIRECTION('',(5.968960955562E-04,0.999999821858,0.)); +#321306 = PLANE('',#321307); +#321307 = AXIS2_PLACEMENT_3D('',#321308,#321309,#321310); +#321308 = CARTESIAN_POINT('',(146.83,-117.329882,0.)); +#321309 = DIRECTION('',(0.999999821858,-5.968960955562E-04,0.)); +#321310 = DIRECTION('',(5.968960955562E-04,0.999999821858,0.)); +#321311 = ADVANCED_FACE('',(#321312),#321337,.F.); +#321312 = FACE_BOUND('',#321313,.F.); +#321313 = EDGE_LOOP('',(#321314,#321315,#321323,#321331)); +#321314 = ORIENTED_EDGE('',*,*,#321293,.T.); +#321315 = ORIENTED_EDGE('',*,*,#321316,.T.); +#321316 = EDGE_CURVE('',#321286,#321317,#321319,.T.); +#321317 = VERTEX_POINT('',#321318); +#321318 = CARTESIAN_POINT('',(146.846853,-114.075519,-3.5E-02)); +#321319 = LINE('',#321320,#321321); +#321320 = CARTESIAN_POINT('',(146.831921,-114.111567,-3.5E-02)); +#321321 = VECTOR('',#321322,1.); +#321322 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321323 = ORIENTED_EDGE('',*,*,#321324,.F.); +#321324 = EDGE_CURVE('',#321325,#321317,#321327,.T.); +#321325 = VERTEX_POINT('',#321326); +#321326 = CARTESIAN_POINT('',(146.846853,-114.075519,0.)); +#321327 = LINE('',#321328,#321329); +#321328 = CARTESIAN_POINT('',(146.846853,-114.075519,0.)); +#321329 = VECTOR('',#321330,1.); +#321330 = DIRECTION('',(0.,0.,-1.)); +#321331 = ORIENTED_EDGE('',*,*,#321332,.F.); +#321332 = EDGE_CURVE('',#321294,#321325,#321333,.T.); +#321333 = LINE('',#321334,#321335); +#321334 = CARTESIAN_POINT('',(146.831921,-114.111567,0.)); +#321335 = VECTOR('',#321336,1.); +#321336 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321337 = PLANE('',#321338); +#321338 = AXIS2_PLACEMENT_3D('',#321339,#321340,#321341); +#321339 = CARTESIAN_POINT('',(146.831921,-114.111567,0.)); +#321340 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#321341 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#321342 = ADVANCED_FACE('',(#321343),#321359,.F.); +#321343 = FACE_BOUND('',#321344,.F.); +#321344 = EDGE_LOOP('',(#321345,#321346,#321352,#321353)); +#321345 = ORIENTED_EDGE('',*,*,#321324,.T.); +#321346 = ORIENTED_EDGE('',*,*,#321347,.T.); +#321347 = EDGE_CURVE('',#321317,#319993,#321348,.T.); +#321348 = LINE('',#321349,#321350); +#321349 = CARTESIAN_POINT('',(146.846853,-114.075519,-3.5E-02)); +#321350 = VECTOR('',#321351,1.); +#321351 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#321352 = ORIENTED_EDGE('',*,*,#319990,.F.); +#321353 = ORIENTED_EDGE('',*,*,#321354,.F.); +#321354 = EDGE_CURVE('',#321325,#319991,#321355,.T.); +#321355 = LINE('',#321356,#321357); +#321356 = CARTESIAN_POINT('',(146.846853,-114.075519,0.)); +#321357 = VECTOR('',#321358,1.); +#321358 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#321359 = PLANE('',#321360); +#321360 = AXIS2_PLACEMENT_3D('',#321361,#321362,#321363); +#321361 = CARTESIAN_POINT('',(146.846853,-114.075519,0.)); +#321362 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321363 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#321364 = ADVANCED_FACE('',(#321365),#321392,.F.); +#321365 = FACE_BOUND('',#321366,.F.); +#321366 = EDGE_LOOP('',(#321367,#321377,#321384,#321385)); +#321367 = ORIENTED_EDGE('',*,*,#321368,.T.); +#321368 = EDGE_CURVE('',#321369,#321371,#321373,.T.); +#321369 = VERTEX_POINT('',#321370); +#321370 = CARTESIAN_POINT('',(143.737255,-124.15,0.)); +#321371 = VERTEX_POINT('',#321372); +#321372 = CARTESIAN_POINT('',(143.737255,-124.15,-3.5E-02)); +#321373 = LINE('',#321374,#321375); +#321374 = CARTESIAN_POINT('',(143.737255,-124.15,0.)); +#321375 = VECTOR('',#321376,1.); +#321376 = DIRECTION('',(0.,0.,-1.)); +#321377 = ORIENTED_EDGE('',*,*,#321378,.T.); +#321378 = EDGE_CURVE('',#321371,#321371,#321379,.T.); +#321379 = CIRCLE('',#321380,0.137255); +#321380 = AXIS2_PLACEMENT_3D('',#321381,#321382,#321383); +#321381 = CARTESIAN_POINT('',(143.6,-124.15,-3.5E-02)); +#321382 = DIRECTION('',(0.,0.,1.)); +#321383 = DIRECTION('',(1.,0.,-0.)); +#321384 = ORIENTED_EDGE('',*,*,#321368,.F.); +#321385 = ORIENTED_EDGE('',*,*,#321386,.F.); +#321386 = EDGE_CURVE('',#321369,#321369,#321387,.T.); +#321387 = CIRCLE('',#321388,0.137255); +#321388 = AXIS2_PLACEMENT_3D('',#321389,#321390,#321391); +#321389 = CARTESIAN_POINT('',(143.6,-124.15,0.)); +#321390 = DIRECTION('',(0.,0.,1.)); +#321391 = DIRECTION('',(1.,0.,-0.)); +#321392 = CYLINDRICAL_SURFACE('',#321393,0.137255); +#321393 = AXIS2_PLACEMENT_3D('',#321394,#321395,#321396); +#321394 = CARTESIAN_POINT('',(143.6,-124.15,0.)); +#321395 = DIRECTION('',(0.,0.,1.)); +#321396 = DIRECTION('',(1.,0.,-0.)); +#321397 = ADVANCED_FACE('',(#321398),#321425,.F.); +#321398 = FACE_BOUND('',#321399,.F.); +#321399 = EDGE_LOOP('',(#321400,#321410,#321417,#321418)); +#321400 = ORIENTED_EDGE('',*,*,#321401,.T.); +#321401 = EDGE_CURVE('',#321402,#321404,#321406,.T.); +#321402 = VERTEX_POINT('',#321403); +#321403 = CARTESIAN_POINT('',(142.337255,-119.5,0.)); +#321404 = VERTEX_POINT('',#321405); +#321405 = CARTESIAN_POINT('',(142.337255,-119.5,-3.5E-02)); +#321406 = LINE('',#321407,#321408); +#321407 = CARTESIAN_POINT('',(142.337255,-119.5,0.)); +#321408 = VECTOR('',#321409,1.); +#321409 = DIRECTION('',(0.,0.,-1.)); +#321410 = ORIENTED_EDGE('',*,*,#321411,.T.); +#321411 = EDGE_CURVE('',#321404,#321404,#321412,.T.); +#321412 = CIRCLE('',#321413,0.137255); +#321413 = AXIS2_PLACEMENT_3D('',#321414,#321415,#321416); +#321414 = CARTESIAN_POINT('',(142.2,-119.5,-3.5E-02)); +#321415 = DIRECTION('',(0.,0.,1.)); +#321416 = DIRECTION('',(1.,0.,-0.)); +#321417 = ORIENTED_EDGE('',*,*,#321401,.F.); +#321418 = ORIENTED_EDGE('',*,*,#321419,.F.); +#321419 = EDGE_CURVE('',#321402,#321402,#321420,.T.); +#321420 = CIRCLE('',#321421,0.137255); +#321421 = AXIS2_PLACEMENT_3D('',#321422,#321423,#321424); +#321422 = CARTESIAN_POINT('',(142.2,-119.5,0.)); +#321423 = DIRECTION('',(0.,0.,1.)); +#321424 = DIRECTION('',(1.,0.,-0.)); +#321425 = CYLINDRICAL_SURFACE('',#321426,0.137255); +#321426 = AXIS2_PLACEMENT_3D('',#321427,#321428,#321429); +#321427 = CARTESIAN_POINT('',(142.2,-119.5,0.)); +#321428 = DIRECTION('',(0.,0.,1.)); +#321429 = DIRECTION('',(1.,0.,-0.)); +#321430 = ADVANCED_FACE('',(#321431,#321477,#321480),#321483,.F.); +#321431 = FACE_BOUND('',#321432,.F.); +#321432 = EDGE_LOOP('',(#321433,#321434,#321435,#321436,#321437,#321438, + #321439,#321440,#321441,#321442,#321443,#321444,#321445,#321446, + #321447,#321448,#321449,#321450,#321451,#321452,#321453,#321454, + #321455,#321456,#321457,#321458,#321459,#321460,#321461,#321462, + #321463,#321464,#321465,#321466,#321467,#321468,#321469,#321470, + #321471,#321472,#321473,#321474,#321475,#321476)); +#321433 = ORIENTED_EDGE('',*,*,#320016,.T.); +#321434 = ORIENTED_EDGE('',*,*,#320047,.T.); +#321435 = ORIENTED_EDGE('',*,*,#320078,.T.); +#321436 = ORIENTED_EDGE('',*,*,#320109,.T.); +#321437 = ORIENTED_EDGE('',*,*,#320140,.T.); +#321438 = ORIENTED_EDGE('',*,*,#320172,.T.); +#321439 = ORIENTED_EDGE('',*,*,#320204,.T.); +#321440 = ORIENTED_EDGE('',*,*,#320236,.T.); +#321441 = ORIENTED_EDGE('',*,*,#320268,.T.); +#321442 = ORIENTED_EDGE('',*,*,#320299,.T.); +#321443 = ORIENTED_EDGE('',*,*,#320331,.T.); +#321444 = ORIENTED_EDGE('',*,*,#320363,.T.); +#321445 = ORIENTED_EDGE('',*,*,#320394,.T.); +#321446 = ORIENTED_EDGE('',*,*,#320426,.T.); +#321447 = ORIENTED_EDGE('',*,*,#320458,.T.); +#321448 = ORIENTED_EDGE('',*,*,#320489,.T.); +#321449 = ORIENTED_EDGE('',*,*,#320520,.T.); +#321450 = ORIENTED_EDGE('',*,*,#320551,.T.); +#321451 = ORIENTED_EDGE('',*,*,#320582,.T.); +#321452 = ORIENTED_EDGE('',*,*,#320613,.T.); +#321453 = ORIENTED_EDGE('',*,*,#320644,.T.); +#321454 = ORIENTED_EDGE('',*,*,#320675,.T.); +#321455 = ORIENTED_EDGE('',*,*,#320706,.T.); +#321456 = ORIENTED_EDGE('',*,*,#320737,.T.); +#321457 = ORIENTED_EDGE('',*,*,#320768,.T.); +#321458 = ORIENTED_EDGE('',*,*,#320799,.T.); +#321459 = ORIENTED_EDGE('',*,*,#320830,.T.); +#321460 = ORIENTED_EDGE('',*,*,#320861,.T.); +#321461 = ORIENTED_EDGE('',*,*,#320893,.T.); +#321462 = ORIENTED_EDGE('',*,*,#320925,.T.); +#321463 = ORIENTED_EDGE('',*,*,#320956,.T.); +#321464 = ORIENTED_EDGE('',*,*,#320988,.T.); +#321465 = ORIENTED_EDGE('',*,*,#321020,.T.); +#321466 = ORIENTED_EDGE('',*,*,#321051,.T.); +#321467 = ORIENTED_EDGE('',*,*,#321082,.T.); +#321468 = ORIENTED_EDGE('',*,*,#321113,.T.); +#321469 = ORIENTED_EDGE('',*,*,#321144,.T.); +#321470 = ORIENTED_EDGE('',*,*,#321176,.T.); +#321471 = ORIENTED_EDGE('',*,*,#321208,.T.); +#321472 = ORIENTED_EDGE('',*,*,#321239,.T.); +#321473 = ORIENTED_EDGE('',*,*,#321270,.T.); +#321474 = ORIENTED_EDGE('',*,*,#321301,.T.); +#321475 = ORIENTED_EDGE('',*,*,#321332,.T.); +#321476 = ORIENTED_EDGE('',*,*,#321354,.T.); +#321477 = FACE_BOUND('',#321478,.F.); +#321478 = EDGE_LOOP('',(#321479)); +#321479 = ORIENTED_EDGE('',*,*,#321386,.T.); +#321480 = FACE_BOUND('',#321481,.F.); +#321481 = EDGE_LOOP('',(#321482)); +#321482 = ORIENTED_EDGE('',*,*,#321419,.T.); +#321483 = PLANE('',#321484); +#321484 = AXIS2_PLACEMENT_3D('',#321485,#321486,#321487); +#321485 = CARTESIAN_POINT('',(0.,0.,0.)); +#321486 = DIRECTION('',(-0.,-0.,-1.)); +#321487 = DIRECTION('',(-1.,0.,0.)); +#321488 = ADVANCED_FACE('',(#321489,#321535,#321538),#321541,.T.); +#321489 = FACE_BOUND('',#321490,.T.); +#321490 = EDGE_LOOP('',(#321491,#321492,#321493,#321494,#321495,#321496, + #321497,#321498,#321499,#321500,#321501,#321502,#321503,#321504, + #321505,#321506,#321507,#321508,#321509,#321510,#321511,#321512, + #321513,#321514,#321515,#321516,#321517,#321518,#321519,#321520, + #321521,#321522,#321523,#321524,#321525,#321526,#321527,#321528, + #321529,#321530,#321531,#321532,#321533,#321534)); +#321491 = ORIENTED_EDGE('',*,*,#320000,.T.); +#321492 = ORIENTED_EDGE('',*,*,#320031,.T.); +#321493 = ORIENTED_EDGE('',*,*,#320062,.T.); +#321494 = ORIENTED_EDGE('',*,*,#320093,.T.); +#321495 = ORIENTED_EDGE('',*,*,#320124,.T.); +#321496 = ORIENTED_EDGE('',*,*,#320155,.T.); +#321497 = ORIENTED_EDGE('',*,*,#320188,.T.); +#321498 = ORIENTED_EDGE('',*,*,#320219,.T.); +#321499 = ORIENTED_EDGE('',*,*,#320252,.T.); +#321500 = ORIENTED_EDGE('',*,*,#320283,.T.); +#321501 = ORIENTED_EDGE('',*,*,#320314,.T.); +#321502 = ORIENTED_EDGE('',*,*,#320347,.T.); +#321503 = ORIENTED_EDGE('',*,*,#320378,.T.); +#321504 = ORIENTED_EDGE('',*,*,#320409,.T.); +#321505 = ORIENTED_EDGE('',*,*,#320442,.T.); +#321506 = ORIENTED_EDGE('',*,*,#320473,.T.); +#321507 = ORIENTED_EDGE('',*,*,#320504,.T.); +#321508 = ORIENTED_EDGE('',*,*,#320535,.T.); +#321509 = ORIENTED_EDGE('',*,*,#320566,.T.); +#321510 = ORIENTED_EDGE('',*,*,#320597,.T.); +#321511 = ORIENTED_EDGE('',*,*,#320628,.T.); +#321512 = ORIENTED_EDGE('',*,*,#320659,.T.); +#321513 = ORIENTED_EDGE('',*,*,#320690,.T.); +#321514 = ORIENTED_EDGE('',*,*,#320721,.T.); +#321515 = ORIENTED_EDGE('',*,*,#320752,.T.); +#321516 = ORIENTED_EDGE('',*,*,#320783,.T.); +#321517 = ORIENTED_EDGE('',*,*,#320814,.T.); +#321518 = ORIENTED_EDGE('',*,*,#320845,.T.); +#321519 = ORIENTED_EDGE('',*,*,#320876,.T.); +#321520 = ORIENTED_EDGE('',*,*,#320909,.T.); +#321521 = ORIENTED_EDGE('',*,*,#320940,.T.); +#321522 = ORIENTED_EDGE('',*,*,#320971,.T.); +#321523 = ORIENTED_EDGE('',*,*,#321004,.T.); +#321524 = ORIENTED_EDGE('',*,*,#321035,.T.); +#321525 = ORIENTED_EDGE('',*,*,#321066,.T.); +#321526 = ORIENTED_EDGE('',*,*,#321097,.T.); +#321527 = ORIENTED_EDGE('',*,*,#321128,.T.); +#321528 = ORIENTED_EDGE('',*,*,#321159,.T.); +#321529 = ORIENTED_EDGE('',*,*,#321192,.T.); +#321530 = ORIENTED_EDGE('',*,*,#321223,.T.); +#321531 = ORIENTED_EDGE('',*,*,#321254,.T.); +#321532 = ORIENTED_EDGE('',*,*,#321285,.T.); +#321533 = ORIENTED_EDGE('',*,*,#321316,.T.); +#321534 = ORIENTED_EDGE('',*,*,#321347,.T.); +#321535 = FACE_BOUND('',#321536,.T.); +#321536 = EDGE_LOOP('',(#321537)); +#321537 = ORIENTED_EDGE('',*,*,#321378,.T.); +#321538 = FACE_BOUND('',#321539,.T.); +#321539 = EDGE_LOOP('',(#321540)); +#321540 = ORIENTED_EDGE('',*,*,#321411,.T.); +#321541 = PLANE('',#321542); +#321542 = AXIS2_PLACEMENT_3D('',#321543,#321544,#321545); +#321543 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#321544 = DIRECTION('',(-0.,-0.,-1.)); +#321545 = DIRECTION('',(-1.,0.,0.)); +#321546 = MANIFOLD_SOLID_BREP('',#321547); +#321547 = CLOSED_SHELL('',(#321548,#321588,#321619,#321650,#321681, + #321712,#321743,#321774,#321807,#321838,#321869,#321900,#321931, + #321962,#321993,#322024,#322057,#322088,#322119,#322150,#322181, + #322212,#322243,#322274,#322305,#322338,#322360,#322393,#322426, + #322466)); +#321548 = ADVANCED_FACE('',(#321549),#321583,.F.); +#321549 = FACE_BOUND('',#321550,.F.); +#321550 = EDGE_LOOP('',(#321551,#321561,#321569,#321577)); +#321551 = ORIENTED_EDGE('',*,*,#321552,.T.); +#321552 = EDGE_CURVE('',#321553,#321555,#321557,.T.); +#321553 = VERTEX_POINT('',#321554); +#321554 = CARTESIAN_POINT('',(136.481131,-116.,0.)); +#321555 = VERTEX_POINT('',#321556); +#321556 = CARTESIAN_POINT('',(136.481131,-116.,-3.5E-02)); +#321557 = LINE('',#321558,#321559); +#321558 = CARTESIAN_POINT('',(136.481131,-116.,0.)); +#321559 = VECTOR('',#321560,1.); +#321560 = DIRECTION('',(0.,0.,-1.)); +#321561 = ORIENTED_EDGE('',*,*,#321562,.T.); +#321562 = EDGE_CURVE('',#321555,#321563,#321565,.T.); +#321563 = VERTEX_POINT('',#321564); +#321564 = CARTESIAN_POINT('',(137.119509,-116.001921,-3.5E-02)); +#321565 = LINE('',#321566,#321567); +#321566 = CARTESIAN_POINT('',(136.481131,-116.,-3.5E-02)); +#321567 = VECTOR('',#321568,1.); +#321568 = DIRECTION('',(0.999995472422,-3.009175288807E-03,0.)); +#321569 = ORIENTED_EDGE('',*,*,#321570,.F.); +#321570 = EDGE_CURVE('',#321571,#321563,#321573,.T.); +#321571 = VERTEX_POINT('',#321572); +#321572 = CARTESIAN_POINT('',(137.119509,-116.001921,0.)); +#321573 = LINE('',#321574,#321575); +#321574 = CARTESIAN_POINT('',(137.119509,-116.001921,0.)); +#321575 = VECTOR('',#321576,1.); +#321576 = DIRECTION('',(0.,0.,-1.)); +#321577 = ORIENTED_EDGE('',*,*,#321578,.F.); +#321578 = EDGE_CURVE('',#321553,#321571,#321579,.T.); +#321579 = LINE('',#321580,#321581); +#321580 = CARTESIAN_POINT('',(136.481131,-116.,0.)); +#321581 = VECTOR('',#321582,1.); +#321582 = DIRECTION('',(0.999995472422,-3.009175288807E-03,0.)); +#321583 = PLANE('',#321584); +#321584 = AXIS2_PLACEMENT_3D('',#321585,#321586,#321587); +#321585 = CARTESIAN_POINT('',(136.481131,-116.,0.)); +#321586 = DIRECTION('',(-3.009175288807E-03,-0.999995472422,-0.)); +#321587 = DIRECTION('',(0.999995472422,-3.009175288807E-03,0.)); +#321588 = ADVANCED_FACE('',(#321589),#321614,.F.); +#321589 = FACE_BOUND('',#321590,.F.); +#321590 = EDGE_LOOP('',(#321591,#321592,#321600,#321608)); +#321591 = ORIENTED_EDGE('',*,*,#321570,.T.); +#321592 = ORIENTED_EDGE('',*,*,#321593,.T.); +#321593 = EDGE_CURVE('',#321563,#321594,#321596,.T.); +#321594 = VERTEX_POINT('',#321595); +#321595 = CARTESIAN_POINT('',(137.155557,-116.016853,-3.5E-02)); +#321596 = LINE('',#321597,#321598); +#321597 = CARTESIAN_POINT('',(137.119509,-116.001921,-3.5E-02)); +#321598 = VECTOR('',#321599,1.); +#321599 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#321600 = ORIENTED_EDGE('',*,*,#321601,.F.); +#321601 = EDGE_CURVE('',#321602,#321594,#321604,.T.); +#321602 = VERTEX_POINT('',#321603); +#321603 = CARTESIAN_POINT('',(137.155557,-116.016853,0.)); +#321604 = LINE('',#321605,#321606); +#321605 = CARTESIAN_POINT('',(137.155557,-116.016853,0.)); +#321606 = VECTOR('',#321607,1.); +#321607 = DIRECTION('',(0.,0.,-1.)); +#321608 = ORIENTED_EDGE('',*,*,#321609,.F.); +#321609 = EDGE_CURVE('',#321571,#321602,#321610,.T.); +#321610 = LINE('',#321611,#321612); +#321611 = CARTESIAN_POINT('',(137.119509,-116.001921,0.)); +#321612 = VECTOR('',#321613,1.); +#321613 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#321614 = PLANE('',#321615); +#321615 = AXIS2_PLACEMENT_3D('',#321616,#321617,#321618); +#321616 = CARTESIAN_POINT('',(137.119509,-116.001921,0.)); +#321617 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#321618 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#321619 = ADVANCED_FACE('',(#321620),#321645,.F.); +#321620 = FACE_BOUND('',#321621,.F.); +#321621 = EDGE_LOOP('',(#321622,#321623,#321631,#321639)); +#321622 = ORIENTED_EDGE('',*,*,#321601,.T.); +#321623 = ORIENTED_EDGE('',*,*,#321624,.T.); +#321624 = EDGE_CURVE('',#321594,#321625,#321627,.T.); +#321625 = VERTEX_POINT('',#321626); +#321626 = CARTESIAN_POINT('',(138.083147,-116.944443,-3.5E-02)); +#321627 = LINE('',#321628,#321629); +#321628 = CARTESIAN_POINT('',(137.155557,-116.016853,-3.5E-02)); +#321629 = VECTOR('',#321630,1.); +#321630 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321631 = ORIENTED_EDGE('',*,*,#321632,.F.); +#321632 = EDGE_CURVE('',#321633,#321625,#321635,.T.); +#321633 = VERTEX_POINT('',#321634); +#321634 = CARTESIAN_POINT('',(138.083147,-116.944443,0.)); +#321635 = LINE('',#321636,#321637); +#321636 = CARTESIAN_POINT('',(138.083147,-116.944443,0.)); +#321637 = VECTOR('',#321638,1.); +#321638 = DIRECTION('',(0.,0.,-1.)); +#321639 = ORIENTED_EDGE('',*,*,#321640,.F.); +#321640 = EDGE_CURVE('',#321602,#321633,#321641,.T.); +#321641 = LINE('',#321642,#321643); +#321642 = CARTESIAN_POINT('',(137.155557,-116.016853,0.)); +#321643 = VECTOR('',#321644,1.); +#321644 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321645 = PLANE('',#321646); +#321646 = AXIS2_PLACEMENT_3D('',#321647,#321648,#321649); +#321647 = CARTESIAN_POINT('',(137.155557,-116.016853,0.)); +#321648 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#321649 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321650 = ADVANCED_FACE('',(#321651),#321676,.F.); +#321651 = FACE_BOUND('',#321652,.F.); +#321652 = EDGE_LOOP('',(#321653,#321654,#321662,#321670)); +#321653 = ORIENTED_EDGE('',*,*,#321632,.T.); +#321654 = ORIENTED_EDGE('',*,*,#321655,.T.); +#321655 = EDGE_CURVE('',#321625,#321656,#321658,.T.); +#321656 = VERTEX_POINT('',#321657); +#321657 = CARTESIAN_POINT('',(138.098079,-116.980491,-3.5E-02)); +#321658 = LINE('',#321659,#321660); +#321659 = CARTESIAN_POINT('',(138.083147,-116.944443,-3.5E-02)); +#321660 = VECTOR('',#321661,1.); +#321661 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#321662 = ORIENTED_EDGE('',*,*,#321663,.F.); +#321663 = EDGE_CURVE('',#321664,#321656,#321666,.T.); +#321664 = VERTEX_POINT('',#321665); +#321665 = CARTESIAN_POINT('',(138.098079,-116.980491,0.)); +#321666 = LINE('',#321667,#321668); +#321667 = CARTESIAN_POINT('',(138.098079,-116.980491,0.)); +#321668 = VECTOR('',#321669,1.); +#321669 = DIRECTION('',(0.,0.,-1.)); +#321670 = ORIENTED_EDGE('',*,*,#321671,.F.); +#321671 = EDGE_CURVE('',#321633,#321664,#321672,.T.); +#321672 = LINE('',#321673,#321674); +#321673 = CARTESIAN_POINT('',(138.083147,-116.944443,0.)); +#321674 = VECTOR('',#321675,1.); +#321675 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#321676 = PLANE('',#321677); +#321677 = AXIS2_PLACEMENT_3D('',#321678,#321679,#321680); +#321678 = CARTESIAN_POINT('',(138.083147,-116.944443,0.)); +#321679 = DIRECTION('',(-0.923875640631,-0.38269282806,-0.)); +#321680 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#321681 = ADVANCED_FACE('',(#321682),#321707,.F.); +#321682 = FACE_BOUND('',#321683,.F.); +#321683 = EDGE_LOOP('',(#321684,#321685,#321693,#321701)); +#321684 = ORIENTED_EDGE('',*,*,#321663,.T.); +#321685 = ORIENTED_EDGE('',*,*,#321686,.T.); +#321686 = EDGE_CURVE('',#321656,#321687,#321689,.T.); +#321687 = VERTEX_POINT('',#321688); +#321688 = CARTESIAN_POINT('',(138.1,-118.083077,-3.5E-02)); +#321689 = LINE('',#321690,#321691); +#321690 = CARTESIAN_POINT('',(138.098079,-116.980491,-3.5E-02)); +#321691 = VECTOR('',#321692,1.); +#321692 = DIRECTION('',(1.742265078999E-03,-0.999998482255,0.)); +#321693 = ORIENTED_EDGE('',*,*,#321694,.F.); +#321694 = EDGE_CURVE('',#321695,#321687,#321697,.T.); +#321695 = VERTEX_POINT('',#321696); +#321696 = CARTESIAN_POINT('',(138.1,-118.083077,0.)); +#321697 = LINE('',#321698,#321699); +#321698 = CARTESIAN_POINT('',(138.1,-118.083077,0.)); +#321699 = VECTOR('',#321700,1.); +#321700 = DIRECTION('',(0.,0.,-1.)); +#321701 = ORIENTED_EDGE('',*,*,#321702,.F.); +#321702 = EDGE_CURVE('',#321664,#321695,#321703,.T.); +#321703 = LINE('',#321704,#321705); +#321704 = CARTESIAN_POINT('',(138.098079,-116.980491,0.)); +#321705 = VECTOR('',#321706,1.); +#321706 = DIRECTION('',(1.742265078999E-03,-0.999998482255,0.)); +#321707 = PLANE('',#321708); +#321708 = AXIS2_PLACEMENT_3D('',#321709,#321710,#321711); +#321709 = CARTESIAN_POINT('',(138.098079,-116.980491,0.)); +#321710 = DIRECTION('',(-0.999998482255,-1.742265078999E-03,-0.)); +#321711 = DIRECTION('',(1.742265078999E-03,-0.999998482255,0.)); +#321712 = ADVANCED_FACE('',(#321713),#321738,.F.); +#321713 = FACE_BOUND('',#321714,.F.); +#321714 = EDGE_LOOP('',(#321715,#321716,#321724,#321732)); +#321715 = ORIENTED_EDGE('',*,*,#321694,.T.); +#321716 = ORIENTED_EDGE('',*,*,#321717,.T.); +#321717 = EDGE_CURVE('',#321687,#321718,#321720,.T.); +#321718 = VERTEX_POINT('',#321719); +#321719 = CARTESIAN_POINT('',(138.871921,-118.854998,-3.5E-02)); +#321720 = LINE('',#321721,#321722); +#321721 = CARTESIAN_POINT('',(138.1,-118.083077,-3.5E-02)); +#321722 = VECTOR('',#321723,1.); +#321723 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321724 = ORIENTED_EDGE('',*,*,#321725,.F.); +#321725 = EDGE_CURVE('',#321726,#321718,#321728,.T.); +#321726 = VERTEX_POINT('',#321727); +#321727 = CARTESIAN_POINT('',(138.871921,-118.854998,0.)); +#321728 = LINE('',#321729,#321730); +#321729 = CARTESIAN_POINT('',(138.871921,-118.854998,0.)); +#321730 = VECTOR('',#321731,1.); +#321731 = DIRECTION('',(0.,0.,-1.)); +#321732 = ORIENTED_EDGE('',*,*,#321733,.F.); +#321733 = EDGE_CURVE('',#321695,#321726,#321734,.T.); +#321734 = LINE('',#321735,#321736); +#321735 = CARTESIAN_POINT('',(138.1,-118.083077,0.)); +#321736 = VECTOR('',#321737,1.); +#321737 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321738 = PLANE('',#321739); +#321739 = AXIS2_PLACEMENT_3D('',#321740,#321741,#321742); +#321740 = CARTESIAN_POINT('',(138.1,-118.083077,0.)); +#321741 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#321742 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#321743 = ADVANCED_FACE('',(#321744),#321769,.F.); +#321744 = FACE_BOUND('',#321745,.F.); +#321745 = EDGE_LOOP('',(#321746,#321747,#321755,#321763)); +#321746 = ORIENTED_EDGE('',*,*,#321725,.T.); +#321747 = ORIENTED_EDGE('',*,*,#321748,.T.); +#321748 = EDGE_CURVE('',#321718,#321749,#321751,.T.); +#321749 = VERTEX_POINT('',#321750); +#321750 = CARTESIAN_POINT('',(138.885195,-118.847335,-3.5E-02)); +#321751 = LINE('',#321752,#321753); +#321752 = CARTESIAN_POINT('',(138.871921,-118.854998,-3.5E-02)); +#321753 = VECTOR('',#321754,1.); +#321754 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#321755 = ORIENTED_EDGE('',*,*,#321756,.F.); +#321756 = EDGE_CURVE('',#321757,#321749,#321759,.T.); +#321757 = VERTEX_POINT('',#321758); +#321758 = CARTESIAN_POINT('',(138.885195,-118.847335,0.)); +#321759 = LINE('',#321760,#321761); +#321760 = CARTESIAN_POINT('',(138.885195,-118.847335,0.)); +#321761 = VECTOR('',#321762,1.); +#321762 = DIRECTION('',(0.,0.,-1.)); +#321763 = ORIENTED_EDGE('',*,*,#321764,.F.); +#321764 = EDGE_CURVE('',#321726,#321757,#321765,.T.); +#321765 = LINE('',#321766,#321767); +#321766 = CARTESIAN_POINT('',(138.871921,-118.854998,0.)); +#321767 = VECTOR('',#321768,1.); +#321768 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#321769 = PLANE('',#321770); +#321770 = AXIS2_PLACEMENT_3D('',#321771,#321772,#321773); +#321771 = CARTESIAN_POINT('',(138.871921,-118.854998,0.)); +#321772 = DIRECTION('',(0.499963423545,-0.866046520181,0.)); +#321773 = DIRECTION('',(0.866046520181,0.499963423545,0.)); +#321774 = ADVANCED_FACE('',(#321775),#321802,.T.); +#321775 = FACE_BOUND('',#321776,.F.); +#321776 = EDGE_LOOP('',(#321777,#321778,#321787,#321795)); +#321777 = ORIENTED_EDGE('',*,*,#321756,.T.); +#321778 = ORIENTED_EDGE('',*,*,#321779,.T.); +#321779 = EDGE_CURVE('',#321749,#321780,#321782,.T.); +#321780 = VERTEX_POINT('',#321781); +#321781 = CARTESIAN_POINT('',(138.722836,-119.009694,-3.5E-02)); +#321782 = CIRCLE('',#321783,0.299999934501); +#321783 = AXIS2_PLACEMENT_3D('',#321784,#321785,#321786); +#321784 = CARTESIAN_POINT('',(138.9999998594,-119.1244988594,-3.5E-02)); +#321785 = DIRECTION('',(-0.,0.,-1.)); +#321786 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#321787 = ORIENTED_EDGE('',*,*,#321788,.F.); +#321788 = EDGE_CURVE('',#321789,#321780,#321791,.T.); +#321789 = VERTEX_POINT('',#321790); +#321790 = CARTESIAN_POINT('',(138.722836,-119.009694,0.)); +#321791 = LINE('',#321792,#321793); +#321792 = CARTESIAN_POINT('',(138.722836,-119.009694,0.)); +#321793 = VECTOR('',#321794,1.); +#321794 = DIRECTION('',(0.,0.,-1.)); +#321795 = ORIENTED_EDGE('',*,*,#321796,.F.); +#321796 = EDGE_CURVE('',#321757,#321789,#321797,.T.); +#321797 = CIRCLE('',#321798,0.299999934501); +#321798 = AXIS2_PLACEMENT_3D('',#321799,#321800,#321801); +#321799 = CARTESIAN_POINT('',(138.9999998594,-119.1244988594,0.)); +#321800 = DIRECTION('',(-0.,0.,-1.)); +#321801 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#321802 = CYLINDRICAL_SURFACE('',#321803,0.299999934501); +#321803 = AXIS2_PLACEMENT_3D('',#321804,#321805,#321806); +#321804 = CARTESIAN_POINT('',(138.9999998594,-119.1244988594,0.)); +#321805 = DIRECTION('',(0.,-0.,1.)); +#321806 = DIRECTION('',(-0.382682948224,0.923879733049,0.)); +#321807 = ADVANCED_FACE('',(#321808),#321833,.F.); +#321808 = FACE_BOUND('',#321809,.F.); +#321809 = EDGE_LOOP('',(#321810,#321811,#321819,#321827)); +#321810 = ORIENTED_EDGE('',*,*,#321788,.T.); +#321811 = ORIENTED_EDGE('',*,*,#321812,.T.); +#321812 = EDGE_CURVE('',#321780,#321813,#321815,.T.); +#321813 = VERTEX_POINT('',#321814); +#321814 = CARTESIAN_POINT('',(138.730499,-118.99642,-3.5E-02)); +#321815 = LINE('',#321816,#321817); +#321816 = CARTESIAN_POINT('',(138.722836,-119.009694,-3.5E-02)); +#321817 = VECTOR('',#321818,1.); +#321818 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#321819 = ORIENTED_EDGE('',*,*,#321820,.F.); +#321820 = EDGE_CURVE('',#321821,#321813,#321823,.T.); +#321821 = VERTEX_POINT('',#321822); +#321822 = CARTESIAN_POINT('',(138.730499,-118.99642,0.)); +#321823 = LINE('',#321824,#321825); +#321824 = CARTESIAN_POINT('',(138.730499,-118.99642,0.)); +#321825 = VECTOR('',#321826,1.); +#321826 = DIRECTION('',(0.,0.,-1.)); +#321827 = ORIENTED_EDGE('',*,*,#321828,.F.); +#321828 = EDGE_CURVE('',#321789,#321821,#321829,.T.); +#321829 = LINE('',#321830,#321831); +#321830 = CARTESIAN_POINT('',(138.722836,-119.009694,0.)); +#321831 = VECTOR('',#321832,1.); +#321832 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#321833 = PLANE('',#321834); +#321834 = AXIS2_PLACEMENT_3D('',#321835,#321836,#321837); +#321835 = CARTESIAN_POINT('',(138.722836,-119.009694,0.)); +#321836 = DIRECTION('',(0.86604652018,-0.499963423546,0.)); +#321837 = DIRECTION('',(0.499963423546,0.86604652018,0.)); +#321838 = ADVANCED_FACE('',(#321839),#321864,.F.); +#321839 = FACE_BOUND('',#321840,.F.); +#321840 = EDGE_LOOP('',(#321841,#321842,#321850,#321858)); +#321841 = ORIENTED_EDGE('',*,*,#321820,.T.); +#321842 = ORIENTED_EDGE('',*,*,#321843,.T.); +#321843 = EDGE_CURVE('',#321813,#321844,#321846,.T.); +#321844 = VERTEX_POINT('',#321845); +#321845 = CARTESIAN_POINT('',(137.916853,-118.180056,-3.5E-02)); +#321846 = LINE('',#321847,#321848); +#321847 = CARTESIAN_POINT('',(138.730499,-118.99642,-3.5E-02)); +#321848 = VECTOR('',#321849,1.); +#321849 = DIRECTION('',(-0.705926717304,0.708284878983,0.)); +#321850 = ORIENTED_EDGE('',*,*,#321851,.F.); +#321851 = EDGE_CURVE('',#321852,#321844,#321854,.T.); +#321852 = VERTEX_POINT('',#321853); +#321853 = CARTESIAN_POINT('',(137.916853,-118.180056,0.)); +#321854 = LINE('',#321855,#321856); +#321855 = CARTESIAN_POINT('',(137.916853,-118.180056,0.)); +#321856 = VECTOR('',#321857,1.); +#321857 = DIRECTION('',(0.,0.,-1.)); +#321858 = ORIENTED_EDGE('',*,*,#321859,.F.); +#321859 = EDGE_CURVE('',#321821,#321852,#321860,.T.); +#321860 = LINE('',#321861,#321862); +#321861 = CARTESIAN_POINT('',(138.730499,-118.99642,0.)); +#321862 = VECTOR('',#321863,1.); +#321863 = DIRECTION('',(-0.705926717304,0.708284878983,0.)); +#321864 = PLANE('',#321865); +#321865 = AXIS2_PLACEMENT_3D('',#321866,#321867,#321868); +#321866 = CARTESIAN_POINT('',(138.730499,-118.99642,0.)); +#321867 = DIRECTION('',(0.708284878983,0.705926717304,0.)); +#321868 = DIRECTION('',(-0.705926717304,0.708284878983,0.)); +#321869 = ADVANCED_FACE('',(#321870),#321895,.F.); +#321870 = FACE_BOUND('',#321871,.F.); +#321871 = EDGE_LOOP('',(#321872,#321873,#321881,#321889)); +#321872 = ORIENTED_EDGE('',*,*,#321851,.T.); +#321873 = ORIENTED_EDGE('',*,*,#321874,.T.); +#321874 = EDGE_CURVE('',#321844,#321875,#321877,.T.); +#321875 = VERTEX_POINT('',#321876); +#321876 = CARTESIAN_POINT('',(137.901921,-118.144008,-3.5E-02)); +#321877 = LINE('',#321878,#321879); +#321878 = CARTESIAN_POINT('',(137.916853,-118.180056,-3.5E-02)); +#321879 = VECTOR('',#321880,1.); +#321880 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#321881 = ORIENTED_EDGE('',*,*,#321882,.F.); +#321882 = EDGE_CURVE('',#321883,#321875,#321885,.T.); +#321883 = VERTEX_POINT('',#321884); +#321884 = CARTESIAN_POINT('',(137.901921,-118.144008,0.)); +#321885 = LINE('',#321886,#321887); +#321886 = CARTESIAN_POINT('',(137.901921,-118.144008,0.)); +#321887 = VECTOR('',#321888,1.); +#321888 = DIRECTION('',(0.,0.,-1.)); +#321889 = ORIENTED_EDGE('',*,*,#321890,.F.); +#321890 = EDGE_CURVE('',#321852,#321883,#321891,.T.); +#321891 = LINE('',#321892,#321893); +#321892 = CARTESIAN_POINT('',(137.916853,-118.180056,0.)); +#321893 = VECTOR('',#321894,1.); +#321894 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#321895 = PLANE('',#321896); +#321896 = AXIS2_PLACEMENT_3D('',#321897,#321898,#321899); +#321897 = CARTESIAN_POINT('',(137.916853,-118.180056,0.)); +#321898 = DIRECTION('',(0.923875640631,0.38269282806,0.)); +#321899 = DIRECTION('',(-0.38269282806,0.923875640631,0.)); +#321900 = ADVANCED_FACE('',(#321901),#321926,.F.); +#321901 = FACE_BOUND('',#321902,.F.); +#321902 = EDGE_LOOP('',(#321903,#321904,#321912,#321920)); +#321903 = ORIENTED_EDGE('',*,*,#321882,.T.); +#321904 = ORIENTED_EDGE('',*,*,#321905,.T.); +#321905 = EDGE_CURVE('',#321875,#321906,#321908,.T.); +#321906 = VERTEX_POINT('',#321907); +#321907 = CARTESIAN_POINT('',(137.9,-117.1,-3.5E-02)); +#321908 = LINE('',#321909,#321910); +#321909 = CARTESIAN_POINT('',(137.901921,-118.144008,-3.5E-02)); +#321910 = VECTOR('',#321911,1.); +#321911 = DIRECTION('',(-1.840021099489E-03,0.99999830716,0.)); +#321912 = ORIENTED_EDGE('',*,*,#321913,.F.); +#321913 = EDGE_CURVE('',#321914,#321906,#321916,.T.); +#321914 = VERTEX_POINT('',#321915); +#321915 = CARTESIAN_POINT('',(137.9,-117.1,0.)); +#321916 = LINE('',#321917,#321918); +#321917 = CARTESIAN_POINT('',(137.9,-117.1,0.)); +#321918 = VECTOR('',#321919,1.); +#321919 = DIRECTION('',(0.,0.,-1.)); +#321920 = ORIENTED_EDGE('',*,*,#321921,.F.); +#321921 = EDGE_CURVE('',#321883,#321914,#321922,.T.); +#321922 = LINE('',#321923,#321924); +#321923 = CARTESIAN_POINT('',(137.901921,-118.144008,0.)); +#321924 = VECTOR('',#321925,1.); +#321925 = DIRECTION('',(-1.840021099489E-03,0.99999830716,0.)); +#321926 = PLANE('',#321927); +#321927 = AXIS2_PLACEMENT_3D('',#321928,#321929,#321930); +#321928 = CARTESIAN_POINT('',(137.901921,-118.144008,0.)); +#321929 = DIRECTION('',(0.99999830716,1.840021099489E-03,0.)); +#321930 = DIRECTION('',(-1.840021099489E-03,0.99999830716,0.)); +#321931 = ADVANCED_FACE('',(#321932),#321957,.F.); +#321932 = FACE_BOUND('',#321933,.F.); +#321933 = EDGE_LOOP('',(#321934,#321935,#321943,#321951)); +#321934 = ORIENTED_EDGE('',*,*,#321913,.T.); +#321935 = ORIENTED_EDGE('',*,*,#321936,.T.); +#321936 = EDGE_CURVE('',#321906,#321937,#321939,.T.); +#321937 = VERTEX_POINT('',#321938); +#321938 = CARTESIAN_POINT('',(134.641421,-117.1,-3.5E-02)); +#321939 = LINE('',#321940,#321941); +#321940 = CARTESIAN_POINT('',(137.9,-117.1,-3.5E-02)); +#321941 = VECTOR('',#321942,1.); +#321942 = DIRECTION('',(-1.,0.,0.)); +#321943 = ORIENTED_EDGE('',*,*,#321944,.F.); +#321944 = EDGE_CURVE('',#321945,#321937,#321947,.T.); +#321945 = VERTEX_POINT('',#321946); +#321946 = CARTESIAN_POINT('',(134.641421,-117.1,0.)); +#321947 = LINE('',#321948,#321949); +#321948 = CARTESIAN_POINT('',(134.641421,-117.1,0.)); +#321949 = VECTOR('',#321950,1.); +#321950 = DIRECTION('',(0.,0.,-1.)); +#321951 = ORIENTED_EDGE('',*,*,#321952,.F.); +#321952 = EDGE_CURVE('',#321914,#321945,#321953,.T.); +#321953 = LINE('',#321954,#321955); +#321954 = CARTESIAN_POINT('',(137.9,-117.1,0.)); +#321955 = VECTOR('',#321956,1.); +#321956 = DIRECTION('',(-1.,0.,0.)); +#321957 = PLANE('',#321958); +#321958 = AXIS2_PLACEMENT_3D('',#321959,#321960,#321961); +#321959 = CARTESIAN_POINT('',(137.9,-117.1,0.)); +#321960 = DIRECTION('',(0.,1.,0.)); +#321961 = DIRECTION('',(-1.,0.,0.)); +#321962 = ADVANCED_FACE('',(#321963),#321988,.F.); +#321963 = FACE_BOUND('',#321964,.F.); +#321964 = EDGE_LOOP('',(#321965,#321966,#321974,#321982)); +#321965 = ORIENTED_EDGE('',*,*,#321944,.T.); +#321966 = ORIENTED_EDGE('',*,*,#321967,.T.); +#321967 = EDGE_CURVE('',#321937,#321968,#321970,.T.); +#321968 = VERTEX_POINT('',#321969); +#321969 = CARTESIAN_POINT('',(134.15,-117.591421,-3.5E-02)); +#321970 = LINE('',#321971,#321972); +#321971 = CARTESIAN_POINT('',(134.641421,-117.1,-3.5E-02)); +#321972 = VECTOR('',#321973,1.); +#321973 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#321974 = ORIENTED_EDGE('',*,*,#321975,.F.); +#321975 = EDGE_CURVE('',#321976,#321968,#321978,.T.); +#321976 = VERTEX_POINT('',#321977); +#321977 = CARTESIAN_POINT('',(134.15,-117.591421,0.)); +#321978 = LINE('',#321979,#321980); +#321979 = CARTESIAN_POINT('',(134.15,-117.591421,0.)); +#321980 = VECTOR('',#321981,1.); +#321981 = DIRECTION('',(0.,0.,-1.)); +#321982 = ORIENTED_EDGE('',*,*,#321983,.F.); +#321983 = EDGE_CURVE('',#321945,#321976,#321984,.T.); +#321984 = LINE('',#321985,#321986); +#321985 = CARTESIAN_POINT('',(134.641421,-117.1,0.)); +#321986 = VECTOR('',#321987,1.); +#321987 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#321988 = PLANE('',#321989); +#321989 = AXIS2_PLACEMENT_3D('',#321990,#321991,#321992); +#321990 = CARTESIAN_POINT('',(134.641421,-117.1,0.)); +#321991 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#321992 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#321993 = ADVANCED_FACE('',(#321994),#322019,.F.); +#321994 = FACE_BOUND('',#321995,.F.); +#321995 = EDGE_LOOP('',(#321996,#321997,#322005,#322013)); +#321996 = ORIENTED_EDGE('',*,*,#321975,.T.); +#321997 = ORIENTED_EDGE('',*,*,#321998,.T.); +#321998 = EDGE_CURVE('',#321968,#321999,#322001,.T.); +#321999 = VERTEX_POINT('',#322000); +#322000 = CARTESIAN_POINT('',(134.148079,-118.219509,-3.5E-02)); +#322001 = LINE('',#322002,#322003); +#322002 = CARTESIAN_POINT('',(134.15,-117.591421,-3.5E-02)); +#322003 = VECTOR('',#322004,1.); +#322004 = DIRECTION('',(-3.058474314455E-03,-0.999995322856,0.)); +#322005 = ORIENTED_EDGE('',*,*,#322006,.F.); +#322006 = EDGE_CURVE('',#322007,#321999,#322009,.T.); +#322007 = VERTEX_POINT('',#322008); +#322008 = CARTESIAN_POINT('',(134.148079,-118.219509,0.)); +#322009 = LINE('',#322010,#322011); +#322010 = CARTESIAN_POINT('',(134.148079,-118.219509,0.)); +#322011 = VECTOR('',#322012,1.); +#322012 = DIRECTION('',(0.,0.,-1.)); +#322013 = ORIENTED_EDGE('',*,*,#322014,.F.); +#322014 = EDGE_CURVE('',#321976,#322007,#322015,.T.); +#322015 = LINE('',#322016,#322017); +#322016 = CARTESIAN_POINT('',(134.15,-117.591421,0.)); +#322017 = VECTOR('',#322018,1.); +#322018 = DIRECTION('',(-3.058474314455E-03,-0.999995322856,0.)); +#322019 = PLANE('',#322020); +#322020 = AXIS2_PLACEMENT_3D('',#322021,#322022,#322023); +#322021 = CARTESIAN_POINT('',(134.15,-117.591421,0.)); +#322022 = DIRECTION('',(-0.999995322856,3.058474314455E-03,0.)); +#322023 = DIRECTION('',(-3.058474314455E-03,-0.999995322856,0.)); +#322024 = ADVANCED_FACE('',(#322025),#322052,.T.); +#322025 = FACE_BOUND('',#322026,.F.); +#322026 = EDGE_LOOP('',(#322027,#322028,#322037,#322045)); +#322027 = ORIENTED_EDGE('',*,*,#322006,.T.); +#322028 = ORIENTED_EDGE('',*,*,#322029,.T.); +#322029 = EDGE_CURVE('',#321999,#322030,#322032,.T.); +#322030 = VERTEX_POINT('',#322031); +#322031 = CARTESIAN_POINT('',(133.951921,-118.219509,-3.5E-02)); +#322032 = CIRCLE('',#322033,0.100000456609); +#322033 = AXIS2_PLACEMENT_3D('',#322034,#322035,#322036); +#322034 = CARTESIAN_POINT('',(134.05,-118.2,-3.5E-02)); +#322035 = DIRECTION('',(-0.,0.,-1.)); +#322036 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#322037 = ORIENTED_EDGE('',*,*,#322038,.F.); +#322038 = EDGE_CURVE('',#322039,#322030,#322041,.T.); +#322039 = VERTEX_POINT('',#322040); +#322040 = CARTESIAN_POINT('',(133.951921,-118.219509,0.)); +#322041 = LINE('',#322042,#322043); +#322042 = CARTESIAN_POINT('',(133.951921,-118.219509,0.)); +#322043 = VECTOR('',#322044,1.); +#322044 = DIRECTION('',(0.,0.,-1.)); +#322045 = ORIENTED_EDGE('',*,*,#322046,.F.); +#322046 = EDGE_CURVE('',#322007,#322039,#322047,.T.); +#322047 = CIRCLE('',#322048,0.100000456609); +#322048 = AXIS2_PLACEMENT_3D('',#322049,#322050,#322051); +#322049 = CARTESIAN_POINT('',(134.05,-118.2,0.)); +#322050 = DIRECTION('',(-0.,0.,-1.)); +#322051 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#322052 = CYLINDRICAL_SURFACE('',#322053,0.100000456609); +#322053 = AXIS2_PLACEMENT_3D('',#322054,#322055,#322056); +#322054 = CARTESIAN_POINT('',(134.05,-118.2,0.)); +#322055 = DIRECTION('',(0.,-0.,1.)); +#322056 = DIRECTION('',(0.980785521645,-0.195089109206,-0.)); +#322057 = ADVANCED_FACE('',(#322058),#322083,.F.); +#322058 = FACE_BOUND('',#322059,.F.); +#322059 = EDGE_LOOP('',(#322060,#322061,#322069,#322077)); +#322060 = ORIENTED_EDGE('',*,*,#322038,.T.); +#322061 = ORIENTED_EDGE('',*,*,#322062,.T.); +#322062 = EDGE_CURVE('',#322030,#322063,#322065,.T.); +#322063 = VERTEX_POINT('',#322064); +#322064 = CARTESIAN_POINT('',(133.951921,-117.530491,-3.5E-02)); +#322065 = LINE('',#322066,#322067); +#322066 = CARTESIAN_POINT('',(133.951921,-118.219509,-3.5E-02)); +#322067 = VECTOR('',#322068,1.); +#322068 = DIRECTION('',(0.,1.,0.)); +#322069 = ORIENTED_EDGE('',*,*,#322070,.F.); +#322070 = EDGE_CURVE('',#322071,#322063,#322073,.T.); +#322071 = VERTEX_POINT('',#322072); +#322072 = CARTESIAN_POINT('',(133.951921,-117.530491,0.)); +#322073 = LINE('',#322074,#322075); +#322074 = CARTESIAN_POINT('',(133.951921,-117.530491,0.)); +#322075 = VECTOR('',#322076,1.); +#322076 = DIRECTION('',(0.,0.,-1.)); +#322077 = ORIENTED_EDGE('',*,*,#322078,.F.); +#322078 = EDGE_CURVE('',#322039,#322071,#322079,.T.); +#322079 = LINE('',#322080,#322081); +#322080 = CARTESIAN_POINT('',(133.951921,-118.219509,0.)); +#322081 = VECTOR('',#322082,1.); +#322082 = DIRECTION('',(0.,1.,0.)); +#322083 = PLANE('',#322084); +#322084 = AXIS2_PLACEMENT_3D('',#322085,#322086,#322087); +#322085 = CARTESIAN_POINT('',(133.951921,-118.219509,0.)); +#322086 = DIRECTION('',(1.,-0.,0.)); +#322087 = DIRECTION('',(0.,1.,0.)); +#322088 = ADVANCED_FACE('',(#322089),#322114,.F.); +#322089 = FACE_BOUND('',#322090,.F.); +#322090 = EDGE_LOOP('',(#322091,#322092,#322100,#322108)); +#322091 = ORIENTED_EDGE('',*,*,#322070,.T.); +#322092 = ORIENTED_EDGE('',*,*,#322093,.T.); +#322093 = EDGE_CURVE('',#322063,#322094,#322096,.T.); +#322094 = VERTEX_POINT('',#322095); +#322095 = CARTESIAN_POINT('',(133.966853,-117.494443,-3.5E-02)); +#322096 = LINE('',#322097,#322098); +#322097 = CARTESIAN_POINT('',(133.951921,-117.530491,-3.5E-02)); +#322098 = VECTOR('',#322099,1.); +#322099 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#322100 = ORIENTED_EDGE('',*,*,#322101,.F.); +#322101 = EDGE_CURVE('',#322102,#322094,#322104,.T.); +#322102 = VERTEX_POINT('',#322103); +#322103 = CARTESIAN_POINT('',(133.966853,-117.494443,0.)); +#322104 = LINE('',#322105,#322106); +#322105 = CARTESIAN_POINT('',(133.966853,-117.494443,0.)); +#322106 = VECTOR('',#322107,1.); +#322107 = DIRECTION('',(0.,0.,-1.)); +#322108 = ORIENTED_EDGE('',*,*,#322109,.F.); +#322109 = EDGE_CURVE('',#322071,#322102,#322110,.T.); +#322110 = LINE('',#322111,#322112); +#322111 = CARTESIAN_POINT('',(133.951921,-117.530491,0.)); +#322112 = VECTOR('',#322113,1.); +#322113 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#322114 = PLANE('',#322115); +#322115 = AXIS2_PLACEMENT_3D('',#322116,#322117,#322118); +#322116 = CARTESIAN_POINT('',(133.951921,-117.530491,0.)); +#322117 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322118 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#322119 = ADVANCED_FACE('',(#322120),#322145,.F.); +#322120 = FACE_BOUND('',#322121,.F.); +#322121 = EDGE_LOOP('',(#322122,#322123,#322131,#322139)); +#322122 = ORIENTED_EDGE('',*,*,#322101,.T.); +#322123 = ORIENTED_EDGE('',*,*,#322124,.T.); +#322124 = EDGE_CURVE('',#322094,#322125,#322127,.T.); +#322125 = VERTEX_POINT('',#322126); +#322126 = CARTESIAN_POINT('',(134.544442,-116.916853,-3.5E-02)); +#322127 = LINE('',#322128,#322129); +#322128 = CARTESIAN_POINT('',(133.966853,-117.494443,-3.5E-02)); +#322129 = VECTOR('',#322130,1.); +#322130 = DIRECTION('',(0.707106169067,0.707107393305,0.)); +#322131 = ORIENTED_EDGE('',*,*,#322132,.F.); +#322132 = EDGE_CURVE('',#322133,#322125,#322135,.T.); +#322133 = VERTEX_POINT('',#322134); +#322134 = CARTESIAN_POINT('',(134.544442,-116.916853,0.)); +#322135 = LINE('',#322136,#322137); +#322136 = CARTESIAN_POINT('',(134.544442,-116.916853,0.)); +#322137 = VECTOR('',#322138,1.); +#322138 = DIRECTION('',(0.,0.,-1.)); +#322139 = ORIENTED_EDGE('',*,*,#322140,.F.); +#322140 = EDGE_CURVE('',#322102,#322133,#322141,.T.); +#322141 = LINE('',#322142,#322143); +#322142 = CARTESIAN_POINT('',(133.966853,-117.494443,0.)); +#322143 = VECTOR('',#322144,1.); +#322144 = DIRECTION('',(0.707106169067,0.707107393305,0.)); +#322145 = PLANE('',#322146); +#322146 = AXIS2_PLACEMENT_3D('',#322147,#322148,#322149); +#322147 = CARTESIAN_POINT('',(133.966853,-117.494443,0.)); +#322148 = DIRECTION('',(0.707107393305,-0.707106169067,0.)); +#322149 = DIRECTION('',(0.707106169067,0.707107393305,0.)); +#322150 = ADVANCED_FACE('',(#322151),#322176,.F.); +#322151 = FACE_BOUND('',#322152,.F.); +#322152 = EDGE_LOOP('',(#322153,#322154,#322162,#322170)); +#322153 = ORIENTED_EDGE('',*,*,#322132,.T.); +#322154 = ORIENTED_EDGE('',*,*,#322155,.T.); +#322155 = EDGE_CURVE('',#322125,#322156,#322158,.T.); +#322156 = VERTEX_POINT('',#322157); +#322157 = CARTESIAN_POINT('',(134.580491,-116.901921,-3.5E-02)); +#322158 = LINE('',#322159,#322160); +#322159 = CARTESIAN_POINT('',(134.544442,-116.916853,-3.5E-02)); +#322160 = VECTOR('',#322161,1.); +#322161 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#322162 = ORIENTED_EDGE('',*,*,#322163,.F.); +#322163 = EDGE_CURVE('',#322164,#322156,#322166,.T.); +#322164 = VERTEX_POINT('',#322165); +#322165 = CARTESIAN_POINT('',(134.580491,-116.901921,0.)); +#322166 = LINE('',#322167,#322168); +#322167 = CARTESIAN_POINT('',(134.580491,-116.901921,0.)); +#322168 = VECTOR('',#322169,1.); +#322169 = DIRECTION('',(0.,0.,-1.)); +#322170 = ORIENTED_EDGE('',*,*,#322171,.F.); +#322171 = EDGE_CURVE('',#322133,#322164,#322172,.T.); +#322172 = LINE('',#322173,#322174); +#322173 = CARTESIAN_POINT('',(134.544442,-116.916853,0.)); +#322174 = VECTOR('',#322175,1.); +#322175 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#322176 = PLANE('',#322177); +#322177 = AXIS2_PLACEMENT_3D('',#322178,#322179,#322180); +#322178 = CARTESIAN_POINT('',(134.544442,-116.916853,0.)); +#322179 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#322180 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#322181 = ADVANCED_FACE('',(#322182),#322207,.F.); +#322182 = FACE_BOUND('',#322183,.F.); +#322183 = EDGE_LOOP('',(#322184,#322185,#322193,#322201)); +#322184 = ORIENTED_EDGE('',*,*,#322163,.T.); +#322185 = ORIENTED_EDGE('',*,*,#322186,.T.); +#322186 = EDGE_CURVE('',#322156,#322187,#322189,.T.); +#322187 = VERTEX_POINT('',#322188); +#322188 = CARTESIAN_POINT('',(137.758578,-116.9,-3.5E-02)); +#322189 = LINE('',#322190,#322191); +#322190 = CARTESIAN_POINT('',(134.580491,-116.901921,-3.5E-02)); +#322191 = VECTOR('',#322192,1.); +#322192 = DIRECTION('',(0.999999817319,6.044515612901E-04,0.)); +#322193 = ORIENTED_EDGE('',*,*,#322194,.F.); +#322194 = EDGE_CURVE('',#322195,#322187,#322197,.T.); +#322195 = VERTEX_POINT('',#322196); +#322196 = CARTESIAN_POINT('',(137.758578,-116.9,0.)); +#322197 = LINE('',#322198,#322199); +#322198 = CARTESIAN_POINT('',(137.758578,-116.9,0.)); +#322199 = VECTOR('',#322200,1.); +#322200 = DIRECTION('',(0.,0.,-1.)); +#322201 = ORIENTED_EDGE('',*,*,#322202,.F.); +#322202 = EDGE_CURVE('',#322164,#322195,#322203,.T.); +#322203 = LINE('',#322204,#322205); +#322204 = CARTESIAN_POINT('',(134.580491,-116.901921,0.)); +#322205 = VECTOR('',#322206,1.); +#322206 = DIRECTION('',(0.999999817319,6.044515612901E-04,0.)); +#322207 = PLANE('',#322208); +#322208 = AXIS2_PLACEMENT_3D('',#322209,#322210,#322211); +#322209 = CARTESIAN_POINT('',(134.580491,-116.901921,0.)); +#322210 = DIRECTION('',(6.044515612901E-04,-0.999999817319,0.)); +#322211 = DIRECTION('',(0.999999817319,6.044515612901E-04,0.)); +#322212 = ADVANCED_FACE('',(#322213),#322238,.F.); +#322213 = FACE_BOUND('',#322214,.F.); +#322214 = EDGE_LOOP('',(#322215,#322216,#322224,#322232)); +#322215 = ORIENTED_EDGE('',*,*,#322194,.T.); +#322216 = ORIENTED_EDGE('',*,*,#322217,.T.); +#322217 = EDGE_CURVE('',#322187,#322218,#322220,.T.); +#322218 = VERTEX_POINT('',#322219); +#322219 = CARTESIAN_POINT('',(137.058578,-116.2,-3.5E-02)); +#322220 = LINE('',#322221,#322222); +#322221 = CARTESIAN_POINT('',(137.758578,-116.9,-3.5E-02)); +#322222 = VECTOR('',#322223,1.); +#322223 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#322224 = ORIENTED_EDGE('',*,*,#322225,.F.); +#322225 = EDGE_CURVE('',#322226,#322218,#322228,.T.); +#322226 = VERTEX_POINT('',#322227); +#322227 = CARTESIAN_POINT('',(137.058578,-116.2,0.)); +#322228 = LINE('',#322229,#322230); +#322229 = CARTESIAN_POINT('',(137.058578,-116.2,0.)); +#322230 = VECTOR('',#322231,1.); +#322231 = DIRECTION('',(0.,0.,-1.)); +#322232 = ORIENTED_EDGE('',*,*,#322233,.F.); +#322233 = EDGE_CURVE('',#322195,#322226,#322234,.T.); +#322234 = LINE('',#322235,#322236); +#322235 = CARTESIAN_POINT('',(137.758578,-116.9,0.)); +#322236 = VECTOR('',#322237,1.); +#322237 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#322238 = PLANE('',#322239); +#322239 = AXIS2_PLACEMENT_3D('',#322240,#322241,#322242); +#322240 = CARTESIAN_POINT('',(137.758578,-116.9,0.)); +#322241 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#322242 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#322243 = ADVANCED_FACE('',(#322244),#322269,.F.); +#322244 = FACE_BOUND('',#322245,.F.); +#322245 = EDGE_LOOP('',(#322246,#322247,#322255,#322263)); +#322246 = ORIENTED_EDGE('',*,*,#322225,.T.); +#322247 = ORIENTED_EDGE('',*,*,#322248,.T.); +#322248 = EDGE_CURVE('',#322218,#322249,#322251,.T.); +#322249 = VERTEX_POINT('',#322250); +#322250 = CARTESIAN_POINT('',(136.481131,-116.2,-3.5E-02)); +#322251 = LINE('',#322252,#322253); +#322252 = CARTESIAN_POINT('',(137.058578,-116.2,-3.5E-02)); +#322253 = VECTOR('',#322254,1.); +#322254 = DIRECTION('',(-1.,0.,0.)); +#322255 = ORIENTED_EDGE('',*,*,#322256,.F.); +#322256 = EDGE_CURVE('',#322257,#322249,#322259,.T.); +#322257 = VERTEX_POINT('',#322258); +#322258 = CARTESIAN_POINT('',(136.481131,-116.2,0.)); +#322259 = LINE('',#322260,#322261); +#322260 = CARTESIAN_POINT('',(136.481131,-116.2,0.)); +#322261 = VECTOR('',#322262,1.); +#322262 = DIRECTION('',(0.,0.,-1.)); +#322263 = ORIENTED_EDGE('',*,*,#322264,.F.); +#322264 = EDGE_CURVE('',#322226,#322257,#322265,.T.); +#322265 = LINE('',#322266,#322267); +#322266 = CARTESIAN_POINT('',(137.058578,-116.2,0.)); +#322267 = VECTOR('',#322268,1.); +#322268 = DIRECTION('',(-1.,0.,0.)); +#322269 = PLANE('',#322270); +#322270 = AXIS2_PLACEMENT_3D('',#322271,#322272,#322273); +#322271 = CARTESIAN_POINT('',(137.058578,-116.2,0.)); +#322272 = DIRECTION('',(0.,1.,0.)); +#322273 = DIRECTION('',(-1.,0.,0.)); +#322274 = ADVANCED_FACE('',(#322275),#322300,.F.); +#322275 = FACE_BOUND('',#322276,.F.); +#322276 = EDGE_LOOP('',(#322277,#322278,#322286,#322294)); +#322277 = ORIENTED_EDGE('',*,*,#322256,.T.); +#322278 = ORIENTED_EDGE('',*,*,#322279,.T.); +#322279 = EDGE_CURVE('',#322249,#322280,#322282,.T.); +#322280 = VERTEX_POINT('',#322281); +#322281 = CARTESIAN_POINT('',(136.477164,-116.214805,-3.5E-02)); +#322282 = LINE('',#322283,#322284); +#322283 = CARTESIAN_POINT('',(136.481131,-116.2,-3.5E-02)); +#322284 = VECTOR('',#322285,1.); +#322285 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#322286 = ORIENTED_EDGE('',*,*,#322287,.F.); +#322287 = EDGE_CURVE('',#322288,#322280,#322290,.T.); +#322288 = VERTEX_POINT('',#322289); +#322289 = CARTESIAN_POINT('',(136.477164,-116.214805,0.)); +#322290 = LINE('',#322291,#322292); +#322291 = CARTESIAN_POINT('',(136.477164,-116.214805,0.)); +#322292 = VECTOR('',#322293,1.); +#322293 = DIRECTION('',(0.,0.,-1.)); +#322294 = ORIENTED_EDGE('',*,*,#322295,.F.); +#322295 = EDGE_CURVE('',#322257,#322288,#322296,.T.); +#322296 = LINE('',#322297,#322298); +#322297 = CARTESIAN_POINT('',(136.481131,-116.2,0.)); +#322298 = VECTOR('',#322299,1.); +#322299 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#322300 = PLANE('',#322301); +#322301 = AXIS2_PLACEMENT_3D('',#322302,#322303,#322304); +#322302 = CARTESIAN_POINT('',(136.481131,-116.2,0.)); +#322303 = DIRECTION('',(-0.965925627198,0.25881978812,0.)); +#322304 = DIRECTION('',(-0.25881978812,-0.965925627198,0.)); +#322305 = ADVANCED_FACE('',(#322306),#322333,.T.); +#322306 = FACE_BOUND('',#322307,.F.); +#322307 = EDGE_LOOP('',(#322308,#322309,#322318,#322326)); +#322308 = ORIENTED_EDGE('',*,*,#322287,.T.); +#322309 = ORIENTED_EDGE('',*,*,#322310,.T.); +#322310 = EDGE_CURVE('',#322280,#322311,#322313,.T.); +#322311 = VERTEX_POINT('',#322312); +#322312 = CARTESIAN_POINT('',(136.477164,-115.985195,-3.5E-02)); +#322313 = CIRCLE('',#322314,0.299999888633); +#322314 = AXIS2_PLACEMENT_3D('',#322315,#322316,#322317); +#322315 = CARTESIAN_POINT('',(136.20000024848,-116.1,-3.5E-02)); +#322316 = DIRECTION('',(-0.,0.,-1.)); +#322317 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#322318 = ORIENTED_EDGE('',*,*,#322319,.F.); +#322319 = EDGE_CURVE('',#322320,#322311,#322322,.T.); +#322320 = VERTEX_POINT('',#322321); +#322321 = CARTESIAN_POINT('',(136.477164,-115.985195,0.)); +#322322 = LINE('',#322323,#322324); +#322323 = CARTESIAN_POINT('',(136.477164,-115.985195,0.)); +#322324 = VECTOR('',#322325,1.); +#322325 = DIRECTION('',(0.,0.,-1.)); +#322326 = ORIENTED_EDGE('',*,*,#322327,.F.); +#322327 = EDGE_CURVE('',#322288,#322320,#322328,.T.); +#322328 = CIRCLE('',#322329,0.299999888633); +#322329 = AXIS2_PLACEMENT_3D('',#322330,#322331,#322332); +#322330 = CARTESIAN_POINT('',(136.20000024848,-116.1,0.)); +#322331 = DIRECTION('',(-0.,0.,-1.)); +#322332 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#322333 = CYLINDRICAL_SURFACE('',#322334,0.299999888633); +#322334 = AXIS2_PLACEMENT_3D('',#322335,#322336,#322337); +#322335 = CARTESIAN_POINT('',(136.20000024848,-116.1,0.)); +#322336 = DIRECTION('',(0.,-0.,1.)); +#322337 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#322338 = ADVANCED_FACE('',(#322339),#322355,.F.); +#322339 = FACE_BOUND('',#322340,.F.); +#322340 = EDGE_LOOP('',(#322341,#322342,#322348,#322349)); +#322341 = ORIENTED_EDGE('',*,*,#322319,.T.); +#322342 = ORIENTED_EDGE('',*,*,#322343,.T.); +#322343 = EDGE_CURVE('',#322311,#321555,#322344,.T.); +#322344 = LINE('',#322345,#322346); +#322345 = CARTESIAN_POINT('',(136.477164,-115.985195,-3.5E-02)); +#322346 = VECTOR('',#322347,1.); +#322347 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#322348 = ORIENTED_EDGE('',*,*,#321552,.F.); +#322349 = ORIENTED_EDGE('',*,*,#322350,.F.); +#322350 = EDGE_CURVE('',#322320,#321553,#322351,.T.); +#322351 = LINE('',#322352,#322353); +#322352 = CARTESIAN_POINT('',(136.477164,-115.985195,0.)); +#322353 = VECTOR('',#322354,1.); +#322354 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#322355 = PLANE('',#322356); +#322356 = AXIS2_PLACEMENT_3D('',#322357,#322358,#322359); +#322357 = CARTESIAN_POINT('',(136.477164,-115.985195,0.)); +#322358 = DIRECTION('',(-0.965925627198,-0.25881978812,-0.)); +#322359 = DIRECTION('',(0.25881978812,-0.965925627198,0.)); +#322360 = ADVANCED_FACE('',(#322361),#322388,.F.); +#322361 = FACE_BOUND('',#322362,.F.); +#322362 = EDGE_LOOP('',(#322363,#322373,#322380,#322381)); +#322363 = ORIENTED_EDGE('',*,*,#322364,.T.); +#322364 = EDGE_CURVE('',#322365,#322367,#322369,.T.); +#322365 = VERTEX_POINT('',#322366); +#322366 = CARTESIAN_POINT('',(139.137255,-119.124499,0.)); +#322367 = VERTEX_POINT('',#322368); +#322368 = CARTESIAN_POINT('',(139.137255,-119.124499,-3.5E-02)); +#322369 = LINE('',#322370,#322371); +#322370 = CARTESIAN_POINT('',(139.137255,-119.124499,0.)); +#322371 = VECTOR('',#322372,1.); +#322372 = DIRECTION('',(0.,0.,-1.)); +#322373 = ORIENTED_EDGE('',*,*,#322374,.T.); +#322374 = EDGE_CURVE('',#322367,#322367,#322375,.T.); +#322375 = CIRCLE('',#322376,0.137255); +#322376 = AXIS2_PLACEMENT_3D('',#322377,#322378,#322379); +#322377 = CARTESIAN_POINT('',(139.,-119.124499,-3.5E-02)); +#322378 = DIRECTION('',(0.,0.,1.)); +#322379 = DIRECTION('',(1.,0.,-0.)); +#322380 = ORIENTED_EDGE('',*,*,#322364,.F.); +#322381 = ORIENTED_EDGE('',*,*,#322382,.F.); +#322382 = EDGE_CURVE('',#322365,#322365,#322383,.T.); +#322383 = CIRCLE('',#322384,0.137255); +#322384 = AXIS2_PLACEMENT_3D('',#322385,#322386,#322387); +#322385 = CARTESIAN_POINT('',(139.,-119.124499,0.)); +#322386 = DIRECTION('',(0.,0.,1.)); +#322387 = DIRECTION('',(1.,0.,-0.)); +#322388 = CYLINDRICAL_SURFACE('',#322389,0.137255); +#322389 = AXIS2_PLACEMENT_3D('',#322390,#322391,#322392); +#322390 = CARTESIAN_POINT('',(139.,-119.124499,0.)); +#322391 = DIRECTION('',(0.,0.,1.)); +#322392 = DIRECTION('',(1.,0.,-0.)); +#322393 = ADVANCED_FACE('',(#322394),#322421,.F.); +#322394 = FACE_BOUND('',#322395,.F.); +#322395 = EDGE_LOOP('',(#322396,#322406,#322413,#322414)); +#322396 = ORIENTED_EDGE('',*,*,#322397,.T.); +#322397 = EDGE_CURVE('',#322398,#322400,#322402,.T.); +#322398 = VERTEX_POINT('',#322399); +#322399 = CARTESIAN_POINT('',(136.337255,-116.1,0.)); +#322400 = VERTEX_POINT('',#322401); +#322401 = CARTESIAN_POINT('',(136.337255,-116.1,-3.5E-02)); +#322402 = LINE('',#322403,#322404); +#322403 = CARTESIAN_POINT('',(136.337255,-116.1,0.)); +#322404 = VECTOR('',#322405,1.); +#322405 = DIRECTION('',(0.,0.,-1.)); +#322406 = ORIENTED_EDGE('',*,*,#322407,.T.); +#322407 = EDGE_CURVE('',#322400,#322400,#322408,.T.); +#322408 = CIRCLE('',#322409,0.137255); +#322409 = AXIS2_PLACEMENT_3D('',#322410,#322411,#322412); +#322410 = CARTESIAN_POINT('',(136.2,-116.1,-3.5E-02)); +#322411 = DIRECTION('',(0.,0.,1.)); +#322412 = DIRECTION('',(1.,0.,-0.)); +#322413 = ORIENTED_EDGE('',*,*,#322397,.F.); +#322414 = ORIENTED_EDGE('',*,*,#322415,.F.); +#322415 = EDGE_CURVE('',#322398,#322398,#322416,.T.); +#322416 = CIRCLE('',#322417,0.137255); +#322417 = AXIS2_PLACEMENT_3D('',#322418,#322419,#322420); +#322418 = CARTESIAN_POINT('',(136.2,-116.1,0.)); +#322419 = DIRECTION('',(0.,0.,1.)); +#322420 = DIRECTION('',(1.,0.,-0.)); +#322421 = CYLINDRICAL_SURFACE('',#322422,0.137255); +#322422 = AXIS2_PLACEMENT_3D('',#322423,#322424,#322425); +#322423 = CARTESIAN_POINT('',(136.2,-116.1,0.)); +#322424 = DIRECTION('',(0.,0.,1.)); +#322425 = DIRECTION('',(1.,0.,-0.)); +#322426 = ADVANCED_FACE('',(#322427,#322455,#322458),#322461,.F.); +#322427 = FACE_BOUND('',#322428,.F.); +#322428 = EDGE_LOOP('',(#322429,#322430,#322431,#322432,#322433,#322434, + #322435,#322436,#322437,#322438,#322439,#322440,#322441,#322442, + #322443,#322444,#322445,#322446,#322447,#322448,#322449,#322450, + #322451,#322452,#322453,#322454)); +#322429 = ORIENTED_EDGE('',*,*,#321578,.T.); +#322430 = ORIENTED_EDGE('',*,*,#321609,.T.); +#322431 = ORIENTED_EDGE('',*,*,#321640,.T.); +#322432 = ORIENTED_EDGE('',*,*,#321671,.T.); +#322433 = ORIENTED_EDGE('',*,*,#321702,.T.); +#322434 = ORIENTED_EDGE('',*,*,#321733,.T.); +#322435 = ORIENTED_EDGE('',*,*,#321764,.T.); +#322436 = ORIENTED_EDGE('',*,*,#321796,.T.); +#322437 = ORIENTED_EDGE('',*,*,#321828,.T.); +#322438 = ORIENTED_EDGE('',*,*,#321859,.T.); +#322439 = ORIENTED_EDGE('',*,*,#321890,.T.); +#322440 = ORIENTED_EDGE('',*,*,#321921,.T.); +#322441 = ORIENTED_EDGE('',*,*,#321952,.T.); +#322442 = ORIENTED_EDGE('',*,*,#321983,.T.); +#322443 = ORIENTED_EDGE('',*,*,#322014,.T.); +#322444 = ORIENTED_EDGE('',*,*,#322046,.T.); +#322445 = ORIENTED_EDGE('',*,*,#322078,.T.); +#322446 = ORIENTED_EDGE('',*,*,#322109,.T.); +#322447 = ORIENTED_EDGE('',*,*,#322140,.T.); +#322448 = ORIENTED_EDGE('',*,*,#322171,.T.); +#322449 = ORIENTED_EDGE('',*,*,#322202,.T.); +#322450 = ORIENTED_EDGE('',*,*,#322233,.T.); +#322451 = ORIENTED_EDGE('',*,*,#322264,.T.); +#322452 = ORIENTED_EDGE('',*,*,#322295,.T.); +#322453 = ORIENTED_EDGE('',*,*,#322327,.T.); +#322454 = ORIENTED_EDGE('',*,*,#322350,.T.); +#322455 = FACE_BOUND('',#322456,.F.); +#322456 = EDGE_LOOP('',(#322457)); +#322457 = ORIENTED_EDGE('',*,*,#322382,.T.); +#322458 = FACE_BOUND('',#322459,.F.); +#322459 = EDGE_LOOP('',(#322460)); +#322460 = ORIENTED_EDGE('',*,*,#322415,.T.); +#322461 = PLANE('',#322462); +#322462 = AXIS2_PLACEMENT_3D('',#322463,#322464,#322465); +#322463 = CARTESIAN_POINT('',(0.,0.,0.)); +#322464 = DIRECTION('',(-0.,-0.,-1.)); +#322465 = DIRECTION('',(-1.,0.,0.)); +#322466 = ADVANCED_FACE('',(#322467,#322495,#322498),#322501,.T.); +#322467 = FACE_BOUND('',#322468,.T.); +#322468 = EDGE_LOOP('',(#322469,#322470,#322471,#322472,#322473,#322474, + #322475,#322476,#322477,#322478,#322479,#322480,#322481,#322482, + #322483,#322484,#322485,#322486,#322487,#322488,#322489,#322490, + #322491,#322492,#322493,#322494)); +#322469 = ORIENTED_EDGE('',*,*,#321562,.T.); +#322470 = ORIENTED_EDGE('',*,*,#321593,.T.); +#322471 = ORIENTED_EDGE('',*,*,#321624,.T.); +#322472 = ORIENTED_EDGE('',*,*,#321655,.T.); +#322473 = ORIENTED_EDGE('',*,*,#321686,.T.); +#322474 = ORIENTED_EDGE('',*,*,#321717,.T.); +#322475 = ORIENTED_EDGE('',*,*,#321748,.T.); +#322476 = ORIENTED_EDGE('',*,*,#321779,.T.); +#322477 = ORIENTED_EDGE('',*,*,#321812,.T.); +#322478 = ORIENTED_EDGE('',*,*,#321843,.T.); +#322479 = ORIENTED_EDGE('',*,*,#321874,.T.); +#322480 = ORIENTED_EDGE('',*,*,#321905,.T.); +#322481 = ORIENTED_EDGE('',*,*,#321936,.T.); +#322482 = ORIENTED_EDGE('',*,*,#321967,.T.); +#322483 = ORIENTED_EDGE('',*,*,#321998,.T.); +#322484 = ORIENTED_EDGE('',*,*,#322029,.T.); +#322485 = ORIENTED_EDGE('',*,*,#322062,.T.); +#322486 = ORIENTED_EDGE('',*,*,#322093,.T.); +#322487 = ORIENTED_EDGE('',*,*,#322124,.T.); +#322488 = ORIENTED_EDGE('',*,*,#322155,.T.); +#322489 = ORIENTED_EDGE('',*,*,#322186,.T.); +#322490 = ORIENTED_EDGE('',*,*,#322217,.T.); +#322491 = ORIENTED_EDGE('',*,*,#322248,.T.); +#322492 = ORIENTED_EDGE('',*,*,#322279,.T.); +#322493 = ORIENTED_EDGE('',*,*,#322310,.T.); +#322494 = ORIENTED_EDGE('',*,*,#322343,.T.); +#322495 = FACE_BOUND('',#322496,.T.); +#322496 = EDGE_LOOP('',(#322497)); +#322497 = ORIENTED_EDGE('',*,*,#322374,.T.); +#322498 = FACE_BOUND('',#322499,.T.); +#322499 = EDGE_LOOP('',(#322500)); +#322500 = ORIENTED_EDGE('',*,*,#322407,.T.); +#322501 = PLANE('',#322502); +#322502 = AXIS2_PLACEMENT_3D('',#322503,#322504,#322505); +#322503 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#322504 = DIRECTION('',(-0.,-0.,-1.)); +#322505 = DIRECTION('',(-1.,0.,0.)); +#322506 = MANIFOLD_SOLID_BREP('',#322507); +#322507 = CLOSED_SHELL('',(#322508,#322548,#322579,#322610,#322641, + #322672,#322703,#322734,#322767,#322798,#322829,#322860,#322891, + #322922,#322955,#322986,#323017,#323048,#323079,#323110,#323141, + #323172,#323205,#323236,#323267,#323298,#323329,#323360,#323391, + #323422,#323455,#323486,#323517,#323548,#323581,#323603,#323636, + #323669,#323718)); +#322508 = ADVANCED_FACE('',(#322509),#322543,.F.); +#322509 = FACE_BOUND('',#322510,.F.); +#322510 = EDGE_LOOP('',(#322511,#322521,#322529,#322537)); +#322511 = ORIENTED_EDGE('',*,*,#322512,.T.); +#322512 = EDGE_CURVE('',#322513,#322515,#322517,.T.); +#322513 = VERTEX_POINT('',#322514); +#322514 = CARTESIAN_POINT('',(124.788235,-89.330499,0.)); +#322515 = VERTEX_POINT('',#322516); +#322516 = CARTESIAN_POINT('',(124.788235,-89.330499,-3.5E-02)); +#322517 = LINE('',#322518,#322519); +#322518 = CARTESIAN_POINT('',(124.788235,-89.330499,0.)); +#322519 = VECTOR('',#322520,1.); +#322520 = DIRECTION('',(0.,0.,-1.)); +#322521 = ORIENTED_EDGE('',*,*,#322522,.T.); +#322522 = EDGE_CURVE('',#322515,#322523,#322525,.T.); +#322523 = VERTEX_POINT('',#322524); +#322524 = CARTESIAN_POINT('',(124.786314,-99.482745,-3.5E-02)); +#322525 = LINE('',#322526,#322527); +#322526 = CARTESIAN_POINT('',(124.788235,-89.330499,-3.5E-02)); +#322527 = VECTOR('',#322528,1.); +#322528 = DIRECTION('',(-1.892192097794E-04,-0.999999982098,0.)); +#322529 = ORIENTED_EDGE('',*,*,#322530,.F.); +#322530 = EDGE_CURVE('',#322531,#322523,#322533,.T.); +#322531 = VERTEX_POINT('',#322532); +#322532 = CARTESIAN_POINT('',(124.786314,-99.482745,0.)); +#322533 = LINE('',#322534,#322535); +#322534 = CARTESIAN_POINT('',(124.786314,-99.482745,0.)); +#322535 = VECTOR('',#322536,1.); +#322536 = DIRECTION('',(0.,0.,-1.)); +#322537 = ORIENTED_EDGE('',*,*,#322538,.F.); +#322538 = EDGE_CURVE('',#322513,#322531,#322539,.T.); +#322539 = LINE('',#322540,#322541); +#322540 = CARTESIAN_POINT('',(124.788235,-89.330499,0.)); +#322541 = VECTOR('',#322542,1.); +#322542 = DIRECTION('',(-1.892192097794E-04,-0.999999982098,0.)); +#322543 = PLANE('',#322544); +#322544 = AXIS2_PLACEMENT_3D('',#322545,#322546,#322547); +#322545 = CARTESIAN_POINT('',(124.788235,-89.330499,0.)); +#322546 = DIRECTION('',(-0.999999982098,1.892192097794E-04,0.)); +#322547 = DIRECTION('',(-1.892192097794E-04,-0.999999982098,0.)); +#322548 = ADVANCED_FACE('',(#322549),#322574,.F.); +#322549 = FACE_BOUND('',#322550,.F.); +#322550 = EDGE_LOOP('',(#322551,#322552,#322560,#322568)); +#322551 = ORIENTED_EDGE('',*,*,#322530,.T.); +#322552 = ORIENTED_EDGE('',*,*,#322553,.T.); +#322553 = EDGE_CURVE('',#322523,#322554,#322556,.T.); +#322554 = VERTEX_POINT('',#322555); +#322555 = CARTESIAN_POINT('',(124.771382,-99.518794,-3.5E-02)); +#322556 = LINE('',#322557,#322558); +#322557 = CARTESIAN_POINT('',(124.786314,-99.482745,-3.5E-02)); +#322558 = VECTOR('',#322559,1.); +#322559 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#322560 = ORIENTED_EDGE('',*,*,#322561,.F.); +#322561 = EDGE_CURVE('',#322562,#322554,#322564,.T.); +#322562 = VERTEX_POINT('',#322563); +#322563 = CARTESIAN_POINT('',(124.771382,-99.518794,0.)); +#322564 = LINE('',#322565,#322566); +#322565 = CARTESIAN_POINT('',(124.771382,-99.518794,0.)); +#322566 = VECTOR('',#322567,1.); +#322567 = DIRECTION('',(0.,0.,-1.)); +#322568 = ORIENTED_EDGE('',*,*,#322569,.F.); +#322569 = EDGE_CURVE('',#322531,#322562,#322570,.T.); +#322570 = LINE('',#322571,#322572); +#322571 = CARTESIAN_POINT('',(124.786314,-99.482745,0.)); +#322572 = VECTOR('',#322573,1.); +#322573 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#322574 = PLANE('',#322575); +#322575 = AXIS2_PLACEMENT_3D('',#322576,#322577,#322578); +#322576 = CARTESIAN_POINT('',(124.786314,-99.482745,0.)); +#322577 = DIRECTION('',(-0.923879393968,0.382683766838,0.)); +#322578 = DIRECTION('',(-0.382683766838,-0.923879393968,0.)); +#322579 = ADVANCED_FACE('',(#322580),#322605,.F.); +#322580 = FACE_BOUND('',#322581,.F.); +#322581 = EDGE_LOOP('',(#322582,#322583,#322591,#322599)); +#322582 = ORIENTED_EDGE('',*,*,#322561,.T.); +#322583 = ORIENTED_EDGE('',*,*,#322584,.T.); +#322584 = EDGE_CURVE('',#322554,#322585,#322587,.T.); +#322585 = VERTEX_POINT('',#322586); +#322586 = CARTESIAN_POINT('',(123.792892,-100.5,-3.5E-02)); +#322587 = LINE('',#322588,#322589); +#322588 = CARTESIAN_POINT('',(124.771382,-99.518794,-3.5E-02)); +#322589 = VECTOR('',#322590,1.); +#322590 = DIRECTION('',(-0.706126103055,-0.708086101109,0.)); +#322591 = ORIENTED_EDGE('',*,*,#322592,.F.); +#322592 = EDGE_CURVE('',#322593,#322585,#322595,.T.); +#322593 = VERTEX_POINT('',#322594); +#322594 = CARTESIAN_POINT('',(123.792892,-100.5,0.)); +#322595 = LINE('',#322596,#322597); +#322596 = CARTESIAN_POINT('',(123.792892,-100.5,0.)); +#322597 = VECTOR('',#322598,1.); +#322598 = DIRECTION('',(0.,0.,-1.)); +#322599 = ORIENTED_EDGE('',*,*,#322600,.F.); +#322600 = EDGE_CURVE('',#322562,#322593,#322601,.T.); +#322601 = LINE('',#322602,#322603); +#322602 = CARTESIAN_POINT('',(124.771382,-99.518794,0.)); +#322603 = VECTOR('',#322604,1.); +#322604 = DIRECTION('',(-0.706126103055,-0.708086101109,0.)); +#322605 = PLANE('',#322606); +#322606 = AXIS2_PLACEMENT_3D('',#322607,#322608,#322609); +#322607 = CARTESIAN_POINT('',(124.771382,-99.518794,0.)); +#322608 = DIRECTION('',(-0.708086101109,0.706126103055,0.)); +#322609 = DIRECTION('',(-0.706126103055,-0.708086101109,0.)); +#322610 = ADVANCED_FACE('',(#322611),#322636,.F.); +#322611 = FACE_BOUND('',#322612,.F.); +#322612 = EDGE_LOOP('',(#322613,#322614,#322622,#322630)); +#322613 = ORIENTED_EDGE('',*,*,#322592,.T.); +#322614 = ORIENTED_EDGE('',*,*,#322615,.T.); +#322615 = EDGE_CURVE('',#322585,#322616,#322618,.T.); +#322616 = VERTEX_POINT('',#322617); +#322617 = CARTESIAN_POINT('',(127.667892,-104.375,-3.5E-02)); +#322618 = LINE('',#322619,#322620); +#322619 = CARTESIAN_POINT('',(123.792892,-100.5,-3.5E-02)); +#322620 = VECTOR('',#322621,1.); +#322621 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#322622 = ORIENTED_EDGE('',*,*,#322623,.F.); +#322623 = EDGE_CURVE('',#322624,#322616,#322626,.T.); +#322624 = VERTEX_POINT('',#322625); +#322625 = CARTESIAN_POINT('',(127.667892,-104.375,0.)); +#322626 = LINE('',#322627,#322628); +#322627 = CARTESIAN_POINT('',(127.667892,-104.375,0.)); +#322628 = VECTOR('',#322629,1.); +#322629 = DIRECTION('',(0.,0.,-1.)); +#322630 = ORIENTED_EDGE('',*,*,#322631,.F.); +#322631 = EDGE_CURVE('',#322593,#322624,#322632,.T.); +#322632 = LINE('',#322633,#322634); +#322633 = CARTESIAN_POINT('',(123.792892,-100.5,0.)); +#322634 = VECTOR('',#322635,1.); +#322635 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#322636 = PLANE('',#322637); +#322637 = AXIS2_PLACEMENT_3D('',#322638,#322639,#322640); +#322638 = CARTESIAN_POINT('',(123.792892,-100.5,0.)); +#322639 = DIRECTION('',(-0.707106781187,-0.707106781187,-0.)); +#322640 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#322641 = ADVANCED_FACE('',(#322642),#322667,.F.); +#322642 = FACE_BOUND('',#322643,.F.); +#322643 = EDGE_LOOP('',(#322644,#322645,#322653,#322661)); +#322644 = ORIENTED_EDGE('',*,*,#322623,.T.); +#322645 = ORIENTED_EDGE('',*,*,#322646,.T.); +#322646 = EDGE_CURVE('',#322616,#322647,#322649,.T.); +#322647 = VERTEX_POINT('',#322648); +#322648 = CARTESIAN_POINT('',(130.444509,-104.376921,-3.5E-02)); +#322649 = LINE('',#322650,#322651); +#322650 = CARTESIAN_POINT('',(127.667892,-104.375,-3.5E-02)); +#322651 = VECTOR('',#322652,1.); +#322652 = DIRECTION('',(0.999999760672,-6.91848944326E-04,0.)); +#322653 = ORIENTED_EDGE('',*,*,#322654,.F.); +#322654 = EDGE_CURVE('',#322655,#322647,#322657,.T.); +#322655 = VERTEX_POINT('',#322656); +#322656 = CARTESIAN_POINT('',(130.444509,-104.376921,0.)); +#322657 = LINE('',#322658,#322659); +#322658 = CARTESIAN_POINT('',(130.444509,-104.376921,0.)); +#322659 = VECTOR('',#322660,1.); +#322660 = DIRECTION('',(0.,0.,-1.)); +#322661 = ORIENTED_EDGE('',*,*,#322662,.F.); +#322662 = EDGE_CURVE('',#322624,#322655,#322663,.T.); +#322663 = LINE('',#322664,#322665); +#322664 = CARTESIAN_POINT('',(127.667892,-104.375,0.)); +#322665 = VECTOR('',#322666,1.); +#322666 = DIRECTION('',(0.999999760672,-6.91848944326E-04,0.)); +#322667 = PLANE('',#322668); +#322668 = AXIS2_PLACEMENT_3D('',#322669,#322670,#322671); +#322669 = CARTESIAN_POINT('',(127.667892,-104.375,0.)); +#322670 = DIRECTION('',(-6.91848944326E-04,-0.999999760672,-0.)); +#322671 = DIRECTION('',(0.999999760672,-6.91848944326E-04,0.)); +#322672 = ADVANCED_FACE('',(#322673),#322698,.F.); +#322673 = FACE_BOUND('',#322674,.F.); +#322674 = EDGE_LOOP('',(#322675,#322676,#322684,#322692)); +#322675 = ORIENTED_EDGE('',*,*,#322654,.T.); +#322676 = ORIENTED_EDGE('',*,*,#322677,.T.); +#322677 = EDGE_CURVE('',#322647,#322678,#322680,.T.); +#322678 = VERTEX_POINT('',#322679); +#322679 = CARTESIAN_POINT('',(130.480557,-104.391853,-3.5E-02)); +#322680 = LINE('',#322681,#322682); +#322681 = CARTESIAN_POINT('',(130.444509,-104.376921,-3.5E-02)); +#322682 = VECTOR('',#322683,1.); +#322683 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322684 = ORIENTED_EDGE('',*,*,#322685,.F.); +#322685 = EDGE_CURVE('',#322686,#322678,#322688,.T.); +#322686 = VERTEX_POINT('',#322687); +#322687 = CARTESIAN_POINT('',(130.480557,-104.391853,0.)); +#322688 = LINE('',#322689,#322690); +#322689 = CARTESIAN_POINT('',(130.480557,-104.391853,0.)); +#322690 = VECTOR('',#322691,1.); +#322691 = DIRECTION('',(0.,0.,-1.)); +#322692 = ORIENTED_EDGE('',*,*,#322693,.F.); +#322693 = EDGE_CURVE('',#322655,#322686,#322694,.T.); +#322694 = LINE('',#322695,#322696); +#322695 = CARTESIAN_POINT('',(130.444509,-104.376921,0.)); +#322696 = VECTOR('',#322697,1.); +#322697 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322698 = PLANE('',#322699); +#322699 = AXIS2_PLACEMENT_3D('',#322700,#322701,#322702); +#322700 = CARTESIAN_POINT('',(130.444509,-104.376921,0.)); +#322701 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#322702 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322703 = ADVANCED_FACE('',(#322704),#322729,.F.); +#322704 = FACE_BOUND('',#322705,.F.); +#322705 = EDGE_LOOP('',(#322706,#322707,#322715,#322723)); +#322706 = ORIENTED_EDGE('',*,*,#322685,.T.); +#322707 = ORIENTED_EDGE('',*,*,#322708,.T.); +#322708 = EDGE_CURVE('',#322678,#322709,#322711,.T.); +#322709 = VERTEX_POINT('',#322710); +#322710 = CARTESIAN_POINT('',(131.444304,-105.352882,-3.5E-02)); +#322711 = LINE('',#322712,#322713); +#322712 = CARTESIAN_POINT('',(130.480557,-104.391853,-3.5E-02)); +#322713 = VECTOR('',#322714,1.); +#322714 = DIRECTION('',(0.708104589418,-0.706107562943,0.)); +#322715 = ORIENTED_EDGE('',*,*,#322716,.F.); +#322716 = EDGE_CURVE('',#322717,#322709,#322719,.T.); +#322717 = VERTEX_POINT('',#322718); +#322718 = CARTESIAN_POINT('',(131.444304,-105.352882,0.)); +#322719 = LINE('',#322720,#322721); +#322720 = CARTESIAN_POINT('',(131.444304,-105.352882,0.)); +#322721 = VECTOR('',#322722,1.); +#322722 = DIRECTION('',(0.,0.,-1.)); +#322723 = ORIENTED_EDGE('',*,*,#322724,.F.); +#322724 = EDGE_CURVE('',#322686,#322717,#322725,.T.); +#322725 = LINE('',#322726,#322727); +#322726 = CARTESIAN_POINT('',(130.480557,-104.391853,0.)); +#322727 = VECTOR('',#322728,1.); +#322728 = DIRECTION('',(0.708104589418,-0.706107562943,0.)); +#322729 = PLANE('',#322730); +#322730 = AXIS2_PLACEMENT_3D('',#322731,#322732,#322733); +#322731 = CARTESIAN_POINT('',(130.480557,-104.391853,0.)); +#322732 = DIRECTION('',(-0.706107562943,-0.708104589418,-0.)); +#322733 = DIRECTION('',(0.708104589418,-0.706107562943,0.)); +#322734 = ADVANCED_FACE('',(#322735),#322762,.T.); +#322735 = FACE_BOUND('',#322736,.F.); +#322736 = EDGE_LOOP('',(#322737,#322738,#322747,#322755)); +#322737 = ORIENTED_EDGE('',*,*,#322716,.T.); +#322738 = ORIENTED_EDGE('',*,*,#322739,.T.); +#322739 = EDGE_CURVE('',#322709,#322740,#322742,.T.); +#322740 = VERTEX_POINT('',#322741); +#322741 = CARTESIAN_POINT('',(131.558057,-105.4,-3.5E-02)); +#322742 = CIRCLE('',#322743,0.119952237428); +#322743 = AXIS2_PLACEMENT_3D('',#322744,#322745,#322746); +#322744 = CARTESIAN_POINT('',(131.4617835,-105.471553843,-3.5E-02)); +#322745 = DIRECTION('',(0.,0.,-1.)); +#322746 = DIRECTION('',(-0.145720499882,0.98932579867,0.)); +#322747 = ORIENTED_EDGE('',*,*,#322748,.F.); +#322748 = EDGE_CURVE('',#322749,#322740,#322751,.T.); +#322749 = VERTEX_POINT('',#322750); +#322750 = CARTESIAN_POINT('',(131.558057,-105.4,0.)); +#322751 = LINE('',#322752,#322753); +#322752 = CARTESIAN_POINT('',(131.558057,-105.4,0.)); +#322753 = VECTOR('',#322754,1.); +#322754 = DIRECTION('',(0.,0.,-1.)); +#322755 = ORIENTED_EDGE('',*,*,#322756,.F.); +#322756 = EDGE_CURVE('',#322717,#322749,#322757,.T.); +#322757 = CIRCLE('',#322758,0.119952237428); +#322758 = AXIS2_PLACEMENT_3D('',#322759,#322760,#322761); +#322759 = CARTESIAN_POINT('',(131.4617835,-105.471553843,0.)); +#322760 = DIRECTION('',(0.,0.,-1.)); +#322761 = DIRECTION('',(-0.145720499882,0.98932579867,0.)); +#322762 = CYLINDRICAL_SURFACE('',#322763,0.119952237428); +#322763 = AXIS2_PLACEMENT_3D('',#322764,#322765,#322766); +#322764 = CARTESIAN_POINT('',(131.4617835,-105.471553843,0.)); +#322765 = DIRECTION('',(-0.,-0.,1.)); +#322766 = DIRECTION('',(-0.145720499882,0.98932579867,0.)); +#322767 = ADVANCED_FACE('',(#322768),#322793,.F.); +#322768 = FACE_BOUND('',#322769,.F.); +#322769 = EDGE_LOOP('',(#322770,#322771,#322779,#322787)); +#322770 = ORIENTED_EDGE('',*,*,#322748,.T.); +#322771 = ORIENTED_EDGE('',*,*,#322772,.T.); +#322772 = EDGE_CURVE('',#322740,#322773,#322775,.T.); +#322773 = VERTEX_POINT('',#322774); +#322774 = CARTESIAN_POINT('',(131.719509,-105.401921,-3.5E-02)); +#322775 = LINE('',#322776,#322777); +#322776 = CARTESIAN_POINT('',(131.558057,-105.4,-3.5E-02)); +#322777 = VECTOR('',#322778,1.); +#322778 = DIRECTION('',(0.999929223063,-1.189743104761E-02,0.)); +#322779 = ORIENTED_EDGE('',*,*,#322780,.F.); +#322780 = EDGE_CURVE('',#322781,#322773,#322783,.T.); +#322781 = VERTEX_POINT('',#322782); +#322782 = CARTESIAN_POINT('',(131.719509,-105.401921,0.)); +#322783 = LINE('',#322784,#322785); +#322784 = CARTESIAN_POINT('',(131.719509,-105.401921,0.)); +#322785 = VECTOR('',#322786,1.); +#322786 = DIRECTION('',(0.,0.,-1.)); +#322787 = ORIENTED_EDGE('',*,*,#322788,.F.); +#322788 = EDGE_CURVE('',#322749,#322781,#322789,.T.); +#322789 = LINE('',#322790,#322791); +#322790 = CARTESIAN_POINT('',(131.558057,-105.4,0.)); +#322791 = VECTOR('',#322792,1.); +#322792 = DIRECTION('',(0.999929223063,-1.189743104761E-02,0.)); +#322793 = PLANE('',#322794); +#322794 = AXIS2_PLACEMENT_3D('',#322795,#322796,#322797); +#322795 = CARTESIAN_POINT('',(131.558057,-105.4,0.)); +#322796 = DIRECTION('',(-1.189743104761E-02,-0.999929223063,-0.)); +#322797 = DIRECTION('',(0.999929223063,-1.189743104761E-02,0.)); +#322798 = ADVANCED_FACE('',(#322799),#322824,.F.); +#322799 = FACE_BOUND('',#322800,.F.); +#322800 = EDGE_LOOP('',(#322801,#322802,#322810,#322818)); +#322801 = ORIENTED_EDGE('',*,*,#322780,.T.); +#322802 = ORIENTED_EDGE('',*,*,#322803,.T.); +#322803 = EDGE_CURVE('',#322773,#322804,#322806,.T.); +#322804 = VERTEX_POINT('',#322805); +#322805 = CARTESIAN_POINT('',(131.755557,-105.416853,-3.5E-02)); +#322806 = LINE('',#322807,#322808); +#322807 = CARTESIAN_POINT('',(131.719509,-105.401921,-3.5E-02)); +#322808 = VECTOR('',#322809,1.); +#322809 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322810 = ORIENTED_EDGE('',*,*,#322811,.F.); +#322811 = EDGE_CURVE('',#322812,#322804,#322814,.T.); +#322812 = VERTEX_POINT('',#322813); +#322813 = CARTESIAN_POINT('',(131.755557,-105.416853,0.)); +#322814 = LINE('',#322815,#322816); +#322815 = CARTESIAN_POINT('',(131.755557,-105.416853,0.)); +#322816 = VECTOR('',#322817,1.); +#322817 = DIRECTION('',(0.,0.,-1.)); +#322818 = ORIENTED_EDGE('',*,*,#322819,.F.); +#322819 = EDGE_CURVE('',#322781,#322812,#322820,.T.); +#322820 = LINE('',#322821,#322822); +#322821 = CARTESIAN_POINT('',(131.719509,-105.401921,0.)); +#322822 = VECTOR('',#322823,1.); +#322823 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322824 = PLANE('',#322825); +#322825 = AXIS2_PLACEMENT_3D('',#322826,#322827,#322828); +#322826 = CARTESIAN_POINT('',(131.719509,-105.401921,0.)); +#322827 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#322828 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#322829 = ADVANCED_FACE('',(#322830),#322855,.F.); +#322830 = FACE_BOUND('',#322831,.F.); +#322831 = EDGE_LOOP('',(#322832,#322833,#322841,#322849)); +#322832 = ORIENTED_EDGE('',*,*,#322811,.T.); +#322833 = ORIENTED_EDGE('',*,*,#322834,.T.); +#322834 = EDGE_CURVE('',#322804,#322835,#322837,.T.); +#322835 = VERTEX_POINT('',#322836); +#322836 = CARTESIAN_POINT('',(134.441421,-108.1,-3.5E-02)); +#322837 = LINE('',#322838,#322839); +#322838 = CARTESIAN_POINT('',(131.755557,-105.416853,-3.5E-02)); +#322839 = VECTOR('',#322840,1.); +#322840 = DIRECTION('',(0.707464523565,-0.706748857726,0.)); +#322841 = ORIENTED_EDGE('',*,*,#322842,.F.); +#322842 = EDGE_CURVE('',#322843,#322835,#322845,.T.); +#322843 = VERTEX_POINT('',#322844); +#322844 = CARTESIAN_POINT('',(134.441421,-108.1,0.)); +#322845 = LINE('',#322846,#322847); +#322846 = CARTESIAN_POINT('',(134.441421,-108.1,0.)); +#322847 = VECTOR('',#322848,1.); +#322848 = DIRECTION('',(0.,0.,-1.)); +#322849 = ORIENTED_EDGE('',*,*,#322850,.F.); +#322850 = EDGE_CURVE('',#322812,#322843,#322851,.T.); +#322851 = LINE('',#322852,#322853); +#322852 = CARTESIAN_POINT('',(131.755557,-105.416853,0.)); +#322853 = VECTOR('',#322854,1.); +#322854 = DIRECTION('',(0.707464523565,-0.706748857726,0.)); +#322855 = PLANE('',#322856); +#322856 = AXIS2_PLACEMENT_3D('',#322857,#322858,#322859); +#322857 = CARTESIAN_POINT('',(131.755557,-105.416853,0.)); +#322858 = DIRECTION('',(-0.706748857726,-0.707464523565,-0.)); +#322859 = DIRECTION('',(0.707464523565,-0.706748857726,0.)); +#322860 = ADVANCED_FACE('',(#322861),#322886,.F.); +#322861 = FACE_BOUND('',#322862,.F.); +#322862 = EDGE_LOOP('',(#322863,#322864,#322872,#322880)); +#322863 = ORIENTED_EDGE('',*,*,#322842,.T.); +#322864 = ORIENTED_EDGE('',*,*,#322865,.T.); +#322865 = EDGE_CURVE('',#322835,#322866,#322868,.T.); +#322866 = VERTEX_POINT('',#322867); +#322867 = CARTESIAN_POINT('',(135.993869,-108.1,-3.5E-02)); +#322868 = LINE('',#322869,#322870); +#322869 = CARTESIAN_POINT('',(134.441421,-108.1,-3.5E-02)); +#322870 = VECTOR('',#322871,1.); +#322871 = DIRECTION('',(1.,0.,0.)); +#322872 = ORIENTED_EDGE('',*,*,#322873,.F.); +#322873 = EDGE_CURVE('',#322874,#322866,#322876,.T.); +#322874 = VERTEX_POINT('',#322875); +#322875 = CARTESIAN_POINT('',(135.993869,-108.1,0.)); +#322876 = LINE('',#322877,#322878); +#322877 = CARTESIAN_POINT('',(135.993869,-108.1,0.)); +#322878 = VECTOR('',#322879,1.); +#322879 = DIRECTION('',(0.,0.,-1.)); +#322880 = ORIENTED_EDGE('',*,*,#322881,.F.); +#322881 = EDGE_CURVE('',#322843,#322874,#322882,.T.); +#322882 = LINE('',#322883,#322884); +#322883 = CARTESIAN_POINT('',(134.441421,-108.1,0.)); +#322884 = VECTOR('',#322885,1.); +#322885 = DIRECTION('',(1.,0.,0.)); +#322886 = PLANE('',#322887); +#322887 = AXIS2_PLACEMENT_3D('',#322888,#322889,#322890); +#322888 = CARTESIAN_POINT('',(134.441421,-108.1,0.)); +#322889 = DIRECTION('',(0.,-1.,0.)); +#322890 = DIRECTION('',(1.,0.,0.)); +#322891 = ADVANCED_FACE('',(#322892),#322917,.F.); +#322892 = FACE_BOUND('',#322893,.F.); +#322893 = EDGE_LOOP('',(#322894,#322895,#322903,#322911)); +#322894 = ORIENTED_EDGE('',*,*,#322873,.T.); +#322895 = ORIENTED_EDGE('',*,*,#322896,.T.); +#322896 = EDGE_CURVE('',#322866,#322897,#322899,.T.); +#322897 = VERTEX_POINT('',#322898); +#322898 = CARTESIAN_POINT('',(135.997836,-108.085195,-3.5E-02)); +#322899 = LINE('',#322900,#322901); +#322900 = CARTESIAN_POINT('',(135.993869,-108.1,-3.5E-02)); +#322901 = VECTOR('',#322902,1.); +#322902 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#322903 = ORIENTED_EDGE('',*,*,#322904,.F.); +#322904 = EDGE_CURVE('',#322905,#322897,#322907,.T.); +#322905 = VERTEX_POINT('',#322906); +#322906 = CARTESIAN_POINT('',(135.997836,-108.085195,0.)); +#322907 = LINE('',#322908,#322909); +#322908 = CARTESIAN_POINT('',(135.997836,-108.085195,0.)); +#322909 = VECTOR('',#322910,1.); +#322910 = DIRECTION('',(0.,0.,-1.)); +#322911 = ORIENTED_EDGE('',*,*,#322912,.F.); +#322912 = EDGE_CURVE('',#322874,#322905,#322913,.T.); +#322913 = LINE('',#322914,#322915); +#322914 = CARTESIAN_POINT('',(135.993869,-108.1,0.)); +#322915 = VECTOR('',#322916,1.); +#322916 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#322917 = PLANE('',#322918); +#322918 = AXIS2_PLACEMENT_3D('',#322919,#322920,#322921); +#322919 = CARTESIAN_POINT('',(135.993869,-108.1,0.)); +#322920 = DIRECTION('',(0.965925627198,-0.25881978812,0.)); +#322921 = DIRECTION('',(0.25881978812,0.965925627198,0.)); +#322922 = ADVANCED_FACE('',(#322923),#322950,.T.); +#322923 = FACE_BOUND('',#322924,.F.); +#322924 = EDGE_LOOP('',(#322925,#322926,#322935,#322943)); +#322925 = ORIENTED_EDGE('',*,*,#322904,.T.); +#322926 = ORIENTED_EDGE('',*,*,#322927,.T.); +#322927 = EDGE_CURVE('',#322897,#322928,#322930,.T.); +#322928 = VERTEX_POINT('',#322929); +#322929 = CARTESIAN_POINT('',(135.997836,-108.314805,-3.5E-02)); +#322930 = CIRCLE('',#322931,0.299999850918); +#322931 = AXIS2_PLACEMENT_3D('',#322932,#322933,#322934); +#322932 = CARTESIAN_POINT('',(136.27499971069,-108.2,-3.5E-02)); +#322933 = DIRECTION('',(0.,0.,-1.)); +#322934 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#322935 = ORIENTED_EDGE('',*,*,#322936,.F.); +#322936 = EDGE_CURVE('',#322937,#322928,#322939,.T.); +#322937 = VERTEX_POINT('',#322938); +#322938 = CARTESIAN_POINT('',(135.997836,-108.314805,0.)); +#322939 = LINE('',#322940,#322941); +#322940 = CARTESIAN_POINT('',(135.997836,-108.314805,0.)); +#322941 = VECTOR('',#322942,1.); +#322942 = DIRECTION('',(0.,0.,-1.)); +#322943 = ORIENTED_EDGE('',*,*,#322944,.F.); +#322944 = EDGE_CURVE('',#322905,#322937,#322945,.T.); +#322945 = CIRCLE('',#322946,0.299999850918); +#322946 = AXIS2_PLACEMENT_3D('',#322947,#322948,#322949); +#322947 = CARTESIAN_POINT('',(136.27499971069,-108.2,0.)); +#322948 = DIRECTION('',(0.,0.,-1.)); +#322949 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#322950 = CYLINDRICAL_SURFACE('',#322951,0.299999850918); +#322951 = AXIS2_PLACEMENT_3D('',#322952,#322953,#322954); +#322952 = CARTESIAN_POINT('',(136.27499971069,-108.2,0.)); +#322953 = DIRECTION('',(-0.,-0.,1.)); +#322954 = DIRECTION('',(-0.92387949476,0.382683523504,-0.)); +#322955 = ADVANCED_FACE('',(#322956),#322981,.F.); +#322956 = FACE_BOUND('',#322957,.F.); +#322957 = EDGE_LOOP('',(#322958,#322959,#322967,#322975)); +#322958 = ORIENTED_EDGE('',*,*,#322936,.T.); +#322959 = ORIENTED_EDGE('',*,*,#322960,.T.); +#322960 = EDGE_CURVE('',#322928,#322961,#322963,.T.); +#322961 = VERTEX_POINT('',#322962); +#322962 = CARTESIAN_POINT('',(135.993869,-108.3,-3.5E-02)); +#322963 = LINE('',#322964,#322965); +#322964 = CARTESIAN_POINT('',(135.997836,-108.314805,-3.5E-02)); +#322965 = VECTOR('',#322966,1.); +#322966 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#322967 = ORIENTED_EDGE('',*,*,#322968,.F.); +#322968 = EDGE_CURVE('',#322969,#322961,#322971,.T.); +#322969 = VERTEX_POINT('',#322970); +#322970 = CARTESIAN_POINT('',(135.993869,-108.3,0.)); +#322971 = LINE('',#322972,#322973); +#322972 = CARTESIAN_POINT('',(135.993869,-108.3,0.)); +#322973 = VECTOR('',#322974,1.); +#322974 = DIRECTION('',(0.,0.,-1.)); +#322975 = ORIENTED_EDGE('',*,*,#322976,.F.); +#322976 = EDGE_CURVE('',#322937,#322969,#322977,.T.); +#322977 = LINE('',#322978,#322979); +#322978 = CARTESIAN_POINT('',(135.997836,-108.314805,0.)); +#322979 = VECTOR('',#322980,1.); +#322980 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#322981 = PLANE('',#322982); +#322982 = AXIS2_PLACEMENT_3D('',#322983,#322984,#322985); +#322983 = CARTESIAN_POINT('',(135.997836,-108.314805,0.)); +#322984 = DIRECTION('',(0.965925627198,0.258819788119,0.)); +#322985 = DIRECTION('',(-0.258819788119,0.965925627198,0.)); +#322986 = ADVANCED_FACE('',(#322987),#323012,.F.); +#322987 = FACE_BOUND('',#322988,.F.); +#322988 = EDGE_LOOP('',(#322989,#322990,#322998,#323006)); +#322989 = ORIENTED_EDGE('',*,*,#322968,.T.); +#322990 = ORIENTED_EDGE('',*,*,#322991,.T.); +#322991 = EDGE_CURVE('',#322961,#322992,#322994,.T.); +#322992 = VERTEX_POINT('',#322993); +#322993 = CARTESIAN_POINT('',(134.380491,-108.298079,-3.5E-02)); +#322994 = LINE('',#322995,#322996); +#322995 = CARTESIAN_POINT('',(135.993869,-108.3,-3.5E-02)); +#322996 = VECTOR('',#322997,1.); +#322997 = DIRECTION('',(-0.999999291154,1.190668670518E-03,0.)); +#322998 = ORIENTED_EDGE('',*,*,#322999,.F.); +#322999 = EDGE_CURVE('',#323000,#322992,#323002,.T.); +#323000 = VERTEX_POINT('',#323001); +#323001 = CARTESIAN_POINT('',(134.380491,-108.298079,0.)); +#323002 = LINE('',#323003,#323004); +#323003 = CARTESIAN_POINT('',(134.380491,-108.298079,0.)); +#323004 = VECTOR('',#323005,1.); +#323005 = DIRECTION('',(0.,0.,-1.)); +#323006 = ORIENTED_EDGE('',*,*,#323007,.F.); +#323007 = EDGE_CURVE('',#322969,#323000,#323008,.T.); +#323008 = LINE('',#323009,#323010); +#323009 = CARTESIAN_POINT('',(135.993869,-108.3,0.)); +#323010 = VECTOR('',#323011,1.); +#323011 = DIRECTION('',(-0.999999291154,1.190668670518E-03,0.)); +#323012 = PLANE('',#323013); +#323013 = AXIS2_PLACEMENT_3D('',#323014,#323015,#323016); +#323014 = CARTESIAN_POINT('',(135.993869,-108.3,0.)); +#323015 = DIRECTION('',(1.190668670518E-03,0.999999291154,0.)); +#323016 = DIRECTION('',(-0.999999291154,1.190668670518E-03,0.)); +#323017 = ADVANCED_FACE('',(#323018),#323043,.F.); +#323018 = FACE_BOUND('',#323019,.F.); +#323019 = EDGE_LOOP('',(#323020,#323021,#323029,#323037)); +#323020 = ORIENTED_EDGE('',*,*,#322999,.T.); +#323021 = ORIENTED_EDGE('',*,*,#323022,.T.); +#323022 = EDGE_CURVE('',#322992,#323023,#323025,.T.); +#323023 = VERTEX_POINT('',#323024); +#323024 = CARTESIAN_POINT('',(134.344443,-108.283148,-3.5E-02)); +#323025 = LINE('',#323026,#323027); +#323026 = CARTESIAN_POINT('',(134.380491,-108.298079,-3.5E-02)); +#323027 = VECTOR('',#323028,1.); +#323028 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323029 = ORIENTED_EDGE('',*,*,#323030,.F.); +#323030 = EDGE_CURVE('',#323031,#323023,#323033,.T.); +#323031 = VERTEX_POINT('',#323032); +#323032 = CARTESIAN_POINT('',(134.344443,-108.283148,0.)); +#323033 = LINE('',#323034,#323035); +#323034 = CARTESIAN_POINT('',(134.344443,-108.283148,0.)); +#323035 = VECTOR('',#323036,1.); +#323036 = DIRECTION('',(0.,0.,-1.)); +#323037 = ORIENTED_EDGE('',*,*,#323038,.F.); +#323038 = EDGE_CURVE('',#323000,#323031,#323039,.T.); +#323039 = LINE('',#323040,#323041); +#323040 = CARTESIAN_POINT('',(134.380491,-108.298079,0.)); +#323041 = VECTOR('',#323042,1.); +#323042 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323043 = PLANE('',#323044); +#323044 = AXIS2_PLACEMENT_3D('',#323045,#323046,#323047); +#323045 = CARTESIAN_POINT('',(134.380491,-108.298079,0.)); +#323046 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#323047 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323048 = ADVANCED_FACE('',(#323049),#323074,.F.); +#323049 = FACE_BOUND('',#323050,.F.); +#323050 = EDGE_LOOP('',(#323051,#323052,#323060,#323068)); +#323051 = ORIENTED_EDGE('',*,*,#323030,.T.); +#323052 = ORIENTED_EDGE('',*,*,#323053,.T.); +#323053 = EDGE_CURVE('',#323023,#323054,#323056,.T.); +#323054 = VERTEX_POINT('',#323055); +#323055 = CARTESIAN_POINT('',(131.658578,-105.6,-3.5E-02)); +#323056 = LINE('',#323057,#323058); +#323057 = CARTESIAN_POINT('',(134.344443,-108.283148,-3.5E-02)); +#323058 = VECTOR('',#323059,1.); +#323059 = DIRECTION('',(-0.707464523431,0.70674885786,0.)); +#323060 = ORIENTED_EDGE('',*,*,#323061,.F.); +#323061 = EDGE_CURVE('',#323062,#323054,#323064,.T.); +#323062 = VERTEX_POINT('',#323063); +#323063 = CARTESIAN_POINT('',(131.658578,-105.6,0.)); +#323064 = LINE('',#323065,#323066); +#323065 = CARTESIAN_POINT('',(131.658578,-105.6,0.)); +#323066 = VECTOR('',#323067,1.); +#323067 = DIRECTION('',(0.,0.,-1.)); +#323068 = ORIENTED_EDGE('',*,*,#323069,.F.); +#323069 = EDGE_CURVE('',#323031,#323062,#323070,.T.); +#323070 = LINE('',#323071,#323072); +#323071 = CARTESIAN_POINT('',(134.344443,-108.283148,0.)); +#323072 = VECTOR('',#323073,1.); +#323073 = DIRECTION('',(-0.707464523431,0.70674885786,0.)); +#323074 = PLANE('',#323075); +#323075 = AXIS2_PLACEMENT_3D('',#323076,#323077,#323078); +#323076 = CARTESIAN_POINT('',(134.344443,-108.283148,0.)); +#323077 = DIRECTION('',(0.70674885786,0.707464523431,0.)); +#323078 = DIRECTION('',(-0.707464523431,0.70674885786,0.)); +#323079 = ADVANCED_FACE('',(#323080),#323105,.F.); +#323080 = FACE_BOUND('',#323081,.F.); +#323081 = EDGE_LOOP('',(#323082,#323083,#323091,#323099)); +#323082 = ORIENTED_EDGE('',*,*,#323061,.T.); +#323083 = ORIENTED_EDGE('',*,*,#323084,.T.); +#323084 = EDGE_CURVE('',#323054,#323085,#323087,.T.); +#323085 = VERTEX_POINT('',#323086); +#323086 = CARTESIAN_POINT('',(131.561044,-105.6,-3.5E-02)); +#323087 = LINE('',#323088,#323089); +#323088 = CARTESIAN_POINT('',(131.658578,-105.6,-3.5E-02)); +#323089 = VECTOR('',#323090,1.); +#323090 = DIRECTION('',(-1.,0.,0.)); +#323091 = ORIENTED_EDGE('',*,*,#323092,.F.); +#323092 = EDGE_CURVE('',#323093,#323085,#323095,.T.); +#323093 = VERTEX_POINT('',#323094); +#323094 = CARTESIAN_POINT('',(131.561044,-105.6,0.)); +#323095 = LINE('',#323096,#323097); +#323096 = CARTESIAN_POINT('',(131.561044,-105.6,0.)); +#323097 = VECTOR('',#323098,1.); +#323098 = DIRECTION('',(0.,0.,-1.)); +#323099 = ORIENTED_EDGE('',*,*,#323100,.F.); +#323100 = EDGE_CURVE('',#323062,#323093,#323101,.T.); +#323101 = LINE('',#323102,#323103); +#323102 = CARTESIAN_POINT('',(131.658578,-105.6,0.)); +#323103 = VECTOR('',#323104,1.); +#323104 = DIRECTION('',(-1.,0.,0.)); +#323105 = PLANE('',#323106); +#323106 = AXIS2_PLACEMENT_3D('',#323107,#323108,#323109); +#323107 = CARTESIAN_POINT('',(131.658578,-105.6,0.)); +#323108 = DIRECTION('',(0.,1.,0.)); +#323109 = DIRECTION('',(-1.,0.,0.)); +#323110 = ADVANCED_FACE('',(#323111),#323136,.F.); +#323111 = FACE_BOUND('',#323112,.F.); +#323112 = EDGE_LOOP('',(#323113,#323114,#323122,#323130)); +#323113 = ORIENTED_EDGE('',*,*,#323092,.T.); +#323114 = ORIENTED_EDGE('',*,*,#323115,.T.); +#323115 = EDGE_CURVE('',#323085,#323116,#323118,.T.); +#323116 = VERTEX_POINT('',#323117); +#323117 = CARTESIAN_POINT('',(130.675,-106.487132,-3.5E-02)); +#323118 = LINE('',#323119,#323120); +#323119 = CARTESIAN_POINT('',(131.561044,-105.6,-3.5E-02)); +#323120 = VECTOR('',#323121,1.); +#323121 = DIRECTION('',(-0.70667277573,-0.707540520424,0.)); +#323122 = ORIENTED_EDGE('',*,*,#323123,.F.); +#323123 = EDGE_CURVE('',#323124,#323116,#323126,.T.); +#323124 = VERTEX_POINT('',#323125); +#323125 = CARTESIAN_POINT('',(130.675,-106.487132,0.)); +#323126 = LINE('',#323127,#323128); +#323127 = CARTESIAN_POINT('',(130.675,-106.487132,0.)); +#323128 = VECTOR('',#323129,1.); +#323129 = DIRECTION('',(0.,0.,-1.)); +#323130 = ORIENTED_EDGE('',*,*,#323131,.F.); +#323131 = EDGE_CURVE('',#323093,#323124,#323132,.T.); +#323132 = LINE('',#323133,#323134); +#323133 = CARTESIAN_POINT('',(131.561044,-105.6,0.)); +#323134 = VECTOR('',#323135,1.); +#323135 = DIRECTION('',(-0.70667277573,-0.707540520424,0.)); +#323136 = PLANE('',#323137); +#323137 = AXIS2_PLACEMENT_3D('',#323138,#323139,#323140); +#323138 = CARTESIAN_POINT('',(131.561044,-105.6,0.)); +#323139 = DIRECTION('',(-0.707540520424,0.70667277573,0.)); +#323140 = DIRECTION('',(-0.70667277573,-0.707540520424,0.)); +#323141 = ADVANCED_FACE('',(#323142),#323167,.F.); +#323142 = FACE_BOUND('',#323143,.F.); +#323143 = EDGE_LOOP('',(#323144,#323145,#323153,#323161)); +#323144 = ORIENTED_EDGE('',*,*,#323123,.T.); +#323145 = ORIENTED_EDGE('',*,*,#323146,.T.); +#323146 = EDGE_CURVE('',#323116,#323147,#323149,.T.); +#323147 = VERTEX_POINT('',#323148); +#323148 = CARTESIAN_POINT('',(130.672118,-107.754264,-3.5E-02)); +#323149 = LINE('',#323150,#323151); +#323150 = CARTESIAN_POINT('',(130.675,-106.487132,-3.5E-02)); +#323151 = VECTOR('',#323152,1.); +#323152 = DIRECTION('',(-2.274421722208E-03,-0.9999974135,0.)); +#323153 = ORIENTED_EDGE('',*,*,#323154,.F.); +#323154 = EDGE_CURVE('',#323155,#323147,#323157,.T.); +#323155 = VERTEX_POINT('',#323156); +#323156 = CARTESIAN_POINT('',(130.672118,-107.754264,0.)); +#323157 = LINE('',#323158,#323159); +#323158 = CARTESIAN_POINT('',(130.672118,-107.754264,0.)); +#323159 = VECTOR('',#323160,1.); +#323160 = DIRECTION('',(0.,0.,-1.)); +#323161 = ORIENTED_EDGE('',*,*,#323162,.F.); +#323162 = EDGE_CURVE('',#323124,#323155,#323163,.T.); +#323163 = LINE('',#323164,#323165); +#323164 = CARTESIAN_POINT('',(130.675,-106.487132,0.)); +#323165 = VECTOR('',#323166,1.); +#323166 = DIRECTION('',(-2.274421722208E-03,-0.9999974135,0.)); +#323167 = PLANE('',#323168); +#323168 = AXIS2_PLACEMENT_3D('',#323169,#323170,#323171); +#323169 = CARTESIAN_POINT('',(130.675,-106.487132,0.)); +#323170 = DIRECTION('',(-0.9999974135,2.274421722208E-03,0.)); +#323171 = DIRECTION('',(-2.274421722208E-03,-0.9999974135,0.)); +#323172 = ADVANCED_FACE('',(#323173),#323200,.T.); +#323173 = FACE_BOUND('',#323174,.F.); +#323174 = EDGE_LOOP('',(#323175,#323176,#323185,#323193)); +#323175 = ORIENTED_EDGE('',*,*,#323154,.T.); +#323176 = ORIENTED_EDGE('',*,*,#323177,.T.); +#323177 = EDGE_CURVE('',#323147,#323178,#323180,.T.); +#323178 = VERTEX_POINT('',#323179); +#323179 = CARTESIAN_POINT('',(130.377882,-107.754264,-3.5E-02)); +#323180 = CIRCLE('',#323181,0.150000292066); +#323181 = AXIS2_PLACEMENT_3D('',#323182,#323183,#323184); +#323182 = CARTESIAN_POINT('',(130.525,-107.725,-3.5E-02)); +#323183 = DIRECTION('',(-0.,0.,-1.)); +#323184 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#323185 = ORIENTED_EDGE('',*,*,#323186,.F.); +#323186 = EDGE_CURVE('',#323187,#323178,#323189,.T.); +#323187 = VERTEX_POINT('',#323188); +#323188 = CARTESIAN_POINT('',(130.377882,-107.754264,0.)); +#323189 = LINE('',#323190,#323191); +#323190 = CARTESIAN_POINT('',(130.377882,-107.754264,0.)); +#323191 = VECTOR('',#323192,1.); +#323192 = DIRECTION('',(0.,0.,-1.)); +#323193 = ORIENTED_EDGE('',*,*,#323194,.F.); +#323194 = EDGE_CURVE('',#323155,#323187,#323195,.T.); +#323195 = CIRCLE('',#323196,0.150000292066); +#323196 = AXIS2_PLACEMENT_3D('',#323197,#323198,#323199); +#323197 = CARTESIAN_POINT('',(130.525,-107.725,0.)); +#323198 = DIRECTION('',(-0.,0.,-1.)); +#323199 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#323200 = CYLINDRICAL_SURFACE('',#323201,0.150000292066); +#323201 = AXIS2_PLACEMENT_3D('',#323202,#323203,#323204); +#323202 = CARTESIAN_POINT('',(130.525,-107.725,0.)); +#323203 = DIRECTION('',(0.,-0.,1.)); +#323204 = DIRECTION('',(0.980784756972,-0.195092953466,-0.)); +#323205 = ADVANCED_FACE('',(#323206),#323231,.F.); +#323206 = FACE_BOUND('',#323207,.F.); +#323207 = EDGE_LOOP('',(#323208,#323209,#323217,#323225)); +#323208 = ORIENTED_EDGE('',*,*,#323186,.T.); +#323209 = ORIENTED_EDGE('',*,*,#323210,.T.); +#323210 = EDGE_CURVE('',#323178,#323211,#323213,.T.); +#323211 = VERTEX_POINT('',#323212); +#323212 = CARTESIAN_POINT('',(130.377882,-106.395736,-3.5E-02)); +#323213 = LINE('',#323214,#323215); +#323214 = CARTESIAN_POINT('',(130.377882,-107.754264,-3.5E-02)); +#323215 = VECTOR('',#323216,1.); +#323216 = DIRECTION('',(0.,1.,0.)); +#323217 = ORIENTED_EDGE('',*,*,#323218,.F.); +#323218 = EDGE_CURVE('',#323219,#323211,#323221,.T.); +#323219 = VERTEX_POINT('',#323220); +#323220 = CARTESIAN_POINT('',(130.377882,-106.395736,0.)); +#323221 = LINE('',#323222,#323223); +#323222 = CARTESIAN_POINT('',(130.377882,-106.395736,0.)); +#323223 = VECTOR('',#323224,1.); +#323224 = DIRECTION('',(0.,0.,-1.)); +#323225 = ORIENTED_EDGE('',*,*,#323226,.F.); +#323226 = EDGE_CURVE('',#323187,#323219,#323227,.T.); +#323227 = LINE('',#323228,#323229); +#323228 = CARTESIAN_POINT('',(130.377882,-107.754264,0.)); +#323229 = VECTOR('',#323230,1.); +#323230 = DIRECTION('',(0.,1.,0.)); +#323231 = PLANE('',#323232); +#323232 = AXIS2_PLACEMENT_3D('',#323233,#323234,#323235); +#323233 = CARTESIAN_POINT('',(130.377882,-107.754264,0.)); +#323234 = DIRECTION('',(1.,-0.,0.)); +#323235 = DIRECTION('',(0.,1.,0.)); +#323236 = ADVANCED_FACE('',(#323237),#323262,.F.); +#323237 = FACE_BOUND('',#323238,.F.); +#323238 = EDGE_LOOP('',(#323239,#323240,#323248,#323256)); +#323239 = ORIENTED_EDGE('',*,*,#323218,.T.); +#323240 = ORIENTED_EDGE('',*,*,#323241,.T.); +#323241 = EDGE_CURVE('',#323211,#323242,#323244,.T.); +#323242 = VERTEX_POINT('',#323243); +#323243 = CARTESIAN_POINT('',(130.400279,-106.341665,-3.5E-02)); +#323244 = LINE('',#323245,#323246); +#323245 = CARTESIAN_POINT('',(130.377882,-106.395736,-3.5E-02)); +#323246 = VECTOR('',#323247,1.); +#323247 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#323248 = ORIENTED_EDGE('',*,*,#323249,.F.); +#323249 = EDGE_CURVE('',#323250,#323242,#323252,.T.); +#323250 = VERTEX_POINT('',#323251); +#323251 = CARTESIAN_POINT('',(130.400279,-106.341665,0.)); +#323252 = LINE('',#323253,#323254); +#323253 = CARTESIAN_POINT('',(130.400279,-106.341665,0.)); +#323254 = VECTOR('',#323255,1.); +#323255 = DIRECTION('',(0.,0.,-1.)); +#323256 = ORIENTED_EDGE('',*,*,#323257,.F.); +#323257 = EDGE_CURVE('',#323219,#323250,#323258,.T.); +#323258 = LINE('',#323259,#323260); +#323259 = CARTESIAN_POINT('',(130.377882,-106.395736,0.)); +#323260 = VECTOR('',#323261,1.); +#323261 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#323262 = PLANE('',#323263); +#323263 = AXIS2_PLACEMENT_3D('',#323264,#323265,#323266); +#323264 = CARTESIAN_POINT('',(130.377882,-106.395736,0.)); +#323265 = DIRECTION('',(0.923879179303,-0.382684285085,0.)); +#323266 = DIRECTION('',(0.382684285085,0.923879179303,0.)); +#323267 = ADVANCED_FACE('',(#323268),#323293,.F.); +#323268 = FACE_BOUND('',#323269,.F.); +#323269 = EDGE_LOOP('',(#323270,#323271,#323279,#323287)); +#323270 = ORIENTED_EDGE('',*,*,#323249,.T.); +#323271 = ORIENTED_EDGE('',*,*,#323272,.T.); +#323272 = EDGE_CURVE('',#323242,#323273,#323275,.T.); +#323273 = VERTEX_POINT('',#323274); +#323274 = CARTESIAN_POINT('',(131.273223,-105.464645,-3.5E-02)); +#323275 = LINE('',#323276,#323277); +#323276 = CARTESIAN_POINT('',(130.400279,-106.341665,-3.5E-02)); +#323277 = VECTOR('',#323278,1.); +#323278 = DIRECTION('',(0.705457880999,0.708751845243,0.)); +#323279 = ORIENTED_EDGE('',*,*,#323280,.F.); +#323280 = EDGE_CURVE('',#323281,#323273,#323283,.T.); +#323281 = VERTEX_POINT('',#323282); +#323282 = CARTESIAN_POINT('',(131.273223,-105.464645,0.)); +#323283 = LINE('',#323284,#323285); +#323284 = CARTESIAN_POINT('',(131.273223,-105.464645,0.)); +#323285 = VECTOR('',#323286,1.); +#323286 = DIRECTION('',(0.,0.,-1.)); +#323287 = ORIENTED_EDGE('',*,*,#323288,.F.); +#323288 = EDGE_CURVE('',#323250,#323281,#323289,.T.); +#323289 = LINE('',#323290,#323291); +#323290 = CARTESIAN_POINT('',(130.400279,-106.341665,0.)); +#323291 = VECTOR('',#323292,1.); +#323292 = DIRECTION('',(0.705457880999,0.708751845243,0.)); +#323293 = PLANE('',#323294); +#323294 = AXIS2_PLACEMENT_3D('',#323295,#323296,#323297); +#323295 = CARTESIAN_POINT('',(130.400279,-106.341665,0.)); +#323296 = DIRECTION('',(0.708751845243,-0.705457880999,0.)); +#323297 = DIRECTION('',(0.705457880999,0.708751845243,0.)); +#323298 = ADVANCED_FACE('',(#323299),#323324,.F.); +#323299 = FACE_BOUND('',#323300,.F.); +#323300 = EDGE_LOOP('',(#323301,#323302,#323310,#323318)); +#323301 = ORIENTED_EDGE('',*,*,#323280,.T.); +#323302 = ORIENTED_EDGE('',*,*,#323303,.T.); +#323303 = EDGE_CURVE('',#323273,#323304,#323306,.T.); +#323304 = VERTEX_POINT('',#323305); +#323305 = CARTESIAN_POINT('',(130.383578,-104.575,-3.5E-02)); +#323306 = LINE('',#323307,#323308); +#323307 = CARTESIAN_POINT('',(131.273223,-105.464645,-3.5E-02)); +#323308 = VECTOR('',#323309,1.); +#323309 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#323310 = ORIENTED_EDGE('',*,*,#323311,.F.); +#323311 = EDGE_CURVE('',#323312,#323304,#323314,.T.); +#323312 = VERTEX_POINT('',#323313); +#323313 = CARTESIAN_POINT('',(130.383578,-104.575,0.)); +#323314 = LINE('',#323315,#323316); +#323315 = CARTESIAN_POINT('',(130.383578,-104.575,0.)); +#323316 = VECTOR('',#323317,1.); +#323317 = DIRECTION('',(0.,0.,-1.)); +#323318 = ORIENTED_EDGE('',*,*,#323319,.F.); +#323319 = EDGE_CURVE('',#323281,#323312,#323320,.T.); +#323320 = LINE('',#323321,#323322); +#323321 = CARTESIAN_POINT('',(131.273223,-105.464645,0.)); +#323322 = VECTOR('',#323323,1.); +#323323 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#323324 = PLANE('',#323325); +#323325 = AXIS2_PLACEMENT_3D('',#323326,#323327,#323328); +#323326 = CARTESIAN_POINT('',(131.273223,-105.464645,0.)); +#323327 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#323328 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#323329 = ADVANCED_FACE('',(#323330),#323355,.F.); +#323330 = FACE_BOUND('',#323331,.F.); +#323331 = EDGE_LOOP('',(#323332,#323333,#323341,#323349)); +#323332 = ORIENTED_EDGE('',*,*,#323311,.T.); +#323333 = ORIENTED_EDGE('',*,*,#323334,.T.); +#323334 = EDGE_CURVE('',#323304,#323335,#323337,.T.); +#323335 = VERTEX_POINT('',#323336); +#323336 = CARTESIAN_POINT('',(127.606962,-104.573079,-3.5E-02)); +#323337 = LINE('',#323338,#323339); +#323338 = CARTESIAN_POINT('',(130.383578,-104.575,-3.5E-02)); +#323339 = VECTOR('',#323340,1.); +#323340 = DIRECTION('',(-0.999999760672,6.918491934957E-04,0.)); +#323341 = ORIENTED_EDGE('',*,*,#323342,.F.); +#323342 = EDGE_CURVE('',#323343,#323335,#323345,.T.); +#323343 = VERTEX_POINT('',#323344); +#323344 = CARTESIAN_POINT('',(127.606962,-104.573079,0.)); +#323345 = LINE('',#323346,#323347); +#323346 = CARTESIAN_POINT('',(127.606962,-104.573079,0.)); +#323347 = VECTOR('',#323348,1.); +#323348 = DIRECTION('',(0.,0.,-1.)); +#323349 = ORIENTED_EDGE('',*,*,#323350,.F.); +#323350 = EDGE_CURVE('',#323312,#323343,#323351,.T.); +#323351 = LINE('',#323352,#323353); +#323352 = CARTESIAN_POINT('',(130.383578,-104.575,0.)); +#323353 = VECTOR('',#323354,1.); +#323354 = DIRECTION('',(-0.999999760672,6.918491934957E-04,0.)); +#323355 = PLANE('',#323356); +#323356 = AXIS2_PLACEMENT_3D('',#323357,#323358,#323359); +#323357 = CARTESIAN_POINT('',(130.383578,-104.575,0.)); +#323358 = DIRECTION('',(6.918491934957E-04,0.999999760672,0.)); +#323359 = DIRECTION('',(-0.999999760672,6.918491934957E-04,0.)); +#323360 = ADVANCED_FACE('',(#323361),#323386,.F.); +#323361 = FACE_BOUND('',#323362,.F.); +#323362 = EDGE_LOOP('',(#323363,#323364,#323372,#323380)); +#323363 = ORIENTED_EDGE('',*,*,#323342,.T.); +#323364 = ORIENTED_EDGE('',*,*,#323365,.T.); +#323365 = EDGE_CURVE('',#323335,#323366,#323368,.T.); +#323366 = VERTEX_POINT('',#323367); +#323367 = CARTESIAN_POINT('',(127.570914,-104.558148,-3.5E-02)); +#323368 = LINE('',#323369,#323370); +#323369 = CARTESIAN_POINT('',(127.606962,-104.573079,-3.5E-02)); +#323370 = VECTOR('',#323371,1.); +#323371 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323372 = ORIENTED_EDGE('',*,*,#323373,.F.); +#323373 = EDGE_CURVE('',#323374,#323366,#323376,.T.); +#323374 = VERTEX_POINT('',#323375); +#323375 = CARTESIAN_POINT('',(127.570914,-104.558148,0.)); +#323376 = LINE('',#323377,#323378); +#323377 = CARTESIAN_POINT('',(127.570914,-104.558148,0.)); +#323378 = VECTOR('',#323379,1.); +#323379 = DIRECTION('',(0.,0.,-1.)); +#323380 = ORIENTED_EDGE('',*,*,#323381,.F.); +#323381 = EDGE_CURVE('',#323343,#323374,#323382,.T.); +#323382 = LINE('',#323383,#323384); +#323383 = CARTESIAN_POINT('',(127.606962,-104.573079,0.)); +#323384 = VECTOR('',#323385,1.); +#323385 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323386 = PLANE('',#323387); +#323387 = AXIS2_PLACEMENT_3D('',#323388,#323389,#323390); +#323388 = CARTESIAN_POINT('',(127.606962,-104.573079,0.)); +#323389 = DIRECTION('',(0.382670952168,0.923884701879,0.)); +#323390 = DIRECTION('',(-0.923884701879,0.382670952168,0.)); +#323391 = ADVANCED_FACE('',(#323392),#323417,.F.); +#323392 = FACE_BOUND('',#323393,.F.); +#323393 = EDGE_LOOP('',(#323394,#323395,#323403,#323411)); +#323394 = ORIENTED_EDGE('',*,*,#323373,.T.); +#323395 = ORIENTED_EDGE('',*,*,#323396,.T.); +#323396 = EDGE_CURVE('',#323366,#323397,#323399,.T.); +#323397 = VERTEX_POINT('',#323398); +#323398 = CARTESIAN_POINT('',(123.592588,-100.579823,-3.5E-02)); +#323399 = LINE('',#323400,#323401); +#323400 = CARTESIAN_POINT('',(127.570914,-104.558148,-3.5E-02)); +#323401 = VECTOR('',#323402,1.); +#323402 = DIRECTION('',(-0.707106870056,0.707106692317,0.)); +#323403 = ORIENTED_EDGE('',*,*,#323404,.F.); +#323404 = EDGE_CURVE('',#323405,#323397,#323407,.T.); +#323405 = VERTEX_POINT('',#323406); +#323406 = CARTESIAN_POINT('',(123.592588,-100.579823,0.)); +#323407 = LINE('',#323408,#323409); +#323408 = CARTESIAN_POINT('',(123.592588,-100.579823,0.)); +#323409 = VECTOR('',#323410,1.); +#323410 = DIRECTION('',(0.,0.,-1.)); +#323411 = ORIENTED_EDGE('',*,*,#323412,.F.); +#323412 = EDGE_CURVE('',#323374,#323405,#323413,.T.); +#323413 = LINE('',#323414,#323415); +#323414 = CARTESIAN_POINT('',(127.570914,-104.558148,0.)); +#323415 = VECTOR('',#323416,1.); +#323416 = DIRECTION('',(-0.707106870056,0.707106692317,0.)); +#323417 = PLANE('',#323418); +#323418 = AXIS2_PLACEMENT_3D('',#323419,#323420,#323421); +#323419 = CARTESIAN_POINT('',(127.570914,-104.558148,0.)); +#323420 = DIRECTION('',(0.707106692317,0.707106870056,0.)); +#323421 = DIRECTION('',(-0.707106870056,0.707106692317,0.)); +#323422 = ADVANCED_FACE('',(#323423),#323450,.T.); +#323423 = FACE_BOUND('',#323424,.F.); +#323424 = EDGE_LOOP('',(#323425,#323426,#323435,#323443)); +#323425 = ORIENTED_EDGE('',*,*,#323404,.T.); +#323426 = ORIENTED_EDGE('',*,*,#323427,.T.); +#323427 = EDGE_CURVE('',#323397,#323428,#323430,.T.); +#323428 = VERTEX_POINT('',#323429); +#323429 = CARTESIAN_POINT('',(123.592588,-100.420179,-3.5E-02)); +#323430 = CIRCLE('',#323431,0.162658753969); +#323431 = AXIS2_PLACEMENT_3D('',#323432,#323433,#323434); +#323432 = CARTESIAN_POINT('',(123.73431420985,-100.500001,-3.5E-02)); +#323433 = DIRECTION('',(0.,0.,-1.)); +#323434 = DIRECTION('',(-0.871310067198,-0.490732887423,-0.)); +#323435 = ORIENTED_EDGE('',*,*,#323436,.F.); +#323436 = EDGE_CURVE('',#323437,#323428,#323439,.T.); +#323437 = VERTEX_POINT('',#323438); +#323438 = CARTESIAN_POINT('',(123.592588,-100.420179,0.)); +#323439 = LINE('',#323440,#323441); +#323440 = CARTESIAN_POINT('',(123.592588,-100.420179,0.)); +#323441 = VECTOR('',#323442,1.); +#323442 = DIRECTION('',(0.,0.,-1.)); +#323443 = ORIENTED_EDGE('',*,*,#323444,.F.); +#323444 = EDGE_CURVE('',#323405,#323437,#323445,.T.); +#323445 = CIRCLE('',#323446,0.162658753969); +#323446 = AXIS2_PLACEMENT_3D('',#323447,#323448,#323449); +#323447 = CARTESIAN_POINT('',(123.73431420985,-100.500001,0.)); +#323448 = DIRECTION('',(0.,0.,-1.)); +#323449 = DIRECTION('',(-0.871310067198,-0.490732887423,-0.)); +#323450 = CYLINDRICAL_SURFACE('',#323451,0.162658753969); +#323451 = AXIS2_PLACEMENT_3D('',#323452,#323453,#323454); +#323452 = CARTESIAN_POINT('',(123.73431420985,-100.500001,0.)); +#323453 = DIRECTION('',(-0.,-0.,1.)); +#323454 = DIRECTION('',(-0.871310067198,-0.490732887423,-0.)); +#323455 = ADVANCED_FACE('',(#323456),#323481,.F.); +#323456 = FACE_BOUND('',#323457,.F.); +#323457 = EDGE_LOOP('',(#323458,#323459,#323467,#323475)); +#323458 = ORIENTED_EDGE('',*,*,#323436,.T.); +#323459 = ORIENTED_EDGE('',*,*,#323460,.T.); +#323460 = EDGE_CURVE('',#323428,#323461,#323463,.T.); +#323461 = VERTEX_POINT('',#323462); +#323462 = CARTESIAN_POINT('',(124.588235,-99.421814,-3.5E-02)); +#323463 = LINE('',#323464,#323465); +#323464 = CARTESIAN_POINT('',(123.592588,-100.420179,-3.5E-02)); +#323465 = VECTOR('',#323466,1.); +#323466 = DIRECTION('',(0.70614228132,0.708069967258,0.)); +#323467 = ORIENTED_EDGE('',*,*,#323468,.F.); +#323468 = EDGE_CURVE('',#323469,#323461,#323471,.T.); +#323469 = VERTEX_POINT('',#323470); +#323470 = CARTESIAN_POINT('',(124.588235,-99.421814,0.)); +#323471 = LINE('',#323472,#323473); +#323472 = CARTESIAN_POINT('',(124.588235,-99.421814,0.)); +#323473 = VECTOR('',#323474,1.); +#323474 = DIRECTION('',(0.,0.,-1.)); +#323475 = ORIENTED_EDGE('',*,*,#323476,.F.); +#323476 = EDGE_CURVE('',#323437,#323469,#323477,.T.); +#323477 = LINE('',#323478,#323479); +#323478 = CARTESIAN_POINT('',(123.592588,-100.420179,0.)); +#323479 = VECTOR('',#323480,1.); +#323480 = DIRECTION('',(0.70614228132,0.708069967258,0.)); +#323481 = PLANE('',#323482); +#323482 = AXIS2_PLACEMENT_3D('',#323483,#323484,#323485); +#323483 = CARTESIAN_POINT('',(123.592588,-100.420179,0.)); +#323484 = DIRECTION('',(0.708069967258,-0.70614228132,0.)); +#323485 = DIRECTION('',(0.70614228132,0.708069967258,0.)); +#323486 = ADVANCED_FACE('',(#323487),#323512,.F.); +#323487 = FACE_BOUND('',#323488,.F.); +#323488 = EDGE_LOOP('',(#323489,#323490,#323498,#323506)); +#323489 = ORIENTED_EDGE('',*,*,#323468,.T.); +#323490 = ORIENTED_EDGE('',*,*,#323491,.T.); +#323491 = EDGE_CURVE('',#323461,#323492,#323494,.T.); +#323492 = VERTEX_POINT('',#323493); +#323493 = CARTESIAN_POINT('',(124.588235,-89.349989,-3.5E-02)); +#323494 = LINE('',#323495,#323496); +#323495 = CARTESIAN_POINT('',(124.588235,-99.421814,-3.5E-02)); +#323496 = VECTOR('',#323497,1.); +#323497 = DIRECTION('',(0.,1.,0.)); +#323498 = ORIENTED_EDGE('',*,*,#323499,.F.); +#323499 = EDGE_CURVE('',#323500,#323492,#323502,.T.); +#323500 = VERTEX_POINT('',#323501); +#323501 = CARTESIAN_POINT('',(124.588235,-89.349989,0.)); +#323502 = LINE('',#323503,#323504); +#323503 = CARTESIAN_POINT('',(124.588235,-89.349989,0.)); +#323504 = VECTOR('',#323505,1.); +#323505 = DIRECTION('',(0.,0.,-1.)); +#323506 = ORIENTED_EDGE('',*,*,#323507,.F.); +#323507 = EDGE_CURVE('',#323469,#323500,#323508,.T.); +#323508 = LINE('',#323509,#323510); +#323509 = CARTESIAN_POINT('',(124.588235,-99.421814,0.)); +#323510 = VECTOR('',#323511,1.); +#323511 = DIRECTION('',(0.,1.,0.)); +#323512 = PLANE('',#323513); +#323513 = AXIS2_PLACEMENT_3D('',#323514,#323515,#323516); +#323514 = CARTESIAN_POINT('',(124.588235,-99.421814,0.)); +#323515 = DIRECTION('',(1.,-0.,0.)); +#323516 = DIRECTION('',(0.,1.,0.)); +#323517 = ADVANCED_FACE('',(#323518),#323543,.F.); +#323518 = FACE_BOUND('',#323519,.F.); +#323519 = EDGE_LOOP('',(#323520,#323521,#323529,#323537)); +#323520 = ORIENTED_EDGE('',*,*,#323499,.T.); +#323521 = ORIENTED_EDGE('',*,*,#323522,.T.); +#323522 = EDGE_CURVE('',#323492,#323523,#323525,.T.); +#323523 = VERTEX_POINT('',#323524); +#323524 = CARTESIAN_POINT('',(124.544954,-89.338393,-3.5E-02)); +#323525 = LINE('',#323526,#323527); +#323526 = CARTESIAN_POINT('',(124.588235,-89.349989,-3.5E-02)); +#323527 = VECTOR('',#323528,1.); +#323528 = DIRECTION('',(-0.96593201358,0.258795952715,0.)); +#323529 = ORIENTED_EDGE('',*,*,#323530,.F.); +#323530 = EDGE_CURVE('',#323531,#323523,#323533,.T.); +#323531 = VERTEX_POINT('',#323532); +#323532 = CARTESIAN_POINT('',(124.544954,-89.338393,0.)); +#323533 = LINE('',#323534,#323535); +#323534 = CARTESIAN_POINT('',(124.544954,-89.338393,0.)); +#323535 = VECTOR('',#323536,1.); +#323536 = DIRECTION('',(0.,0.,-1.)); +#323537 = ORIENTED_EDGE('',*,*,#323538,.F.); +#323538 = EDGE_CURVE('',#323500,#323531,#323539,.T.); +#323539 = LINE('',#323540,#323541); +#323540 = CARTESIAN_POINT('',(124.588235,-89.349989,0.)); +#323541 = VECTOR('',#323542,1.); +#323542 = DIRECTION('',(-0.96593201358,0.258795952715,0.)); +#323543 = PLANE('',#323544); +#323544 = AXIS2_PLACEMENT_3D('',#323545,#323546,#323547); +#323545 = CARTESIAN_POINT('',(124.588235,-89.349989,0.)); +#323546 = DIRECTION('',(0.258795952715,0.96593201358,0.)); +#323547 = DIRECTION('',(-0.96593201358,0.258795952715,0.)); +#323548 = ADVANCED_FACE('',(#323549),#323576,.T.); +#323549 = FACE_BOUND('',#323550,.F.); +#323550 = EDGE_LOOP('',(#323551,#323552,#323561,#323569)); +#323551 = ORIENTED_EDGE('',*,*,#323530,.T.); +#323552 = ORIENTED_EDGE('',*,*,#323553,.T.); +#323553 = EDGE_CURVE('',#323523,#323554,#323556,.T.); +#323554 = VERTEX_POINT('',#323555); +#323555 = CARTESIAN_POINT('',(124.842387,-89.299235,-3.5E-02)); +#323556 = CIRCLE('',#323557,0.299999183254); +#323557 = AXIS2_PLACEMENT_3D('',#323558,#323559,#323560); +#323558 = CARTESIAN_POINT('',(124.65975873463,-89.06122990206,-3.5E-02) + ); +#323559 = DIRECTION('',(0.,0.,-1.)); +#323560 = DIRECTION('',(-0.382683490644,-0.923879508372,-0.)); +#323561 = ORIENTED_EDGE('',*,*,#323562,.F.); +#323562 = EDGE_CURVE('',#323563,#323554,#323565,.T.); +#323563 = VERTEX_POINT('',#323564); +#323564 = CARTESIAN_POINT('',(124.842387,-89.299235,0.)); +#323565 = LINE('',#323566,#323567); +#323566 = CARTESIAN_POINT('',(124.842387,-89.299235,0.)); +#323567 = VECTOR('',#323568,1.); +#323568 = DIRECTION('',(0.,0.,-1.)); +#323569 = ORIENTED_EDGE('',*,*,#323570,.F.); +#323570 = EDGE_CURVE('',#323531,#323563,#323571,.T.); +#323571 = CIRCLE('',#323572,0.299999183254); +#323572 = AXIS2_PLACEMENT_3D('',#323573,#323574,#323575); +#323573 = CARTESIAN_POINT('',(124.65975873463,-89.06122990206,0.)); +#323574 = DIRECTION('',(0.,0.,-1.)); +#323575 = DIRECTION('',(-0.382683490644,-0.923879508372,-0.)); +#323576 = CYLINDRICAL_SURFACE('',#323577,0.299999183254); +#323577 = AXIS2_PLACEMENT_3D('',#323578,#323579,#323580); +#323578 = CARTESIAN_POINT('',(124.65975873463,-89.06122990206,0.)); +#323579 = DIRECTION('',(-0.,-0.,1.)); +#323580 = DIRECTION('',(-0.382683490644,-0.923879508372,-0.)); +#323581 = ADVANCED_FACE('',(#323582),#323598,.F.); +#323582 = FACE_BOUND('',#323583,.F.); +#323583 = EDGE_LOOP('',(#323584,#323585,#323591,#323592)); +#323584 = ORIENTED_EDGE('',*,*,#323562,.T.); +#323585 = ORIENTED_EDGE('',*,*,#323586,.T.); +#323586 = EDGE_CURVE('',#323554,#322515,#323587,.T.); +#323587 = LINE('',#323588,#323589); +#323588 = CARTESIAN_POINT('',(124.842387,-89.299235,-3.5E-02)); +#323589 = VECTOR('',#323590,1.); +#323590 = DIRECTION('',(-0.866030055796,-0.499991942392,0.)); +#323591 = ORIENTED_EDGE('',*,*,#322512,.F.); +#323592 = ORIENTED_EDGE('',*,*,#323593,.F.); +#323593 = EDGE_CURVE('',#323563,#322513,#323594,.T.); +#323594 = LINE('',#323595,#323596); +#323595 = CARTESIAN_POINT('',(124.842387,-89.299235,0.)); +#323596 = VECTOR('',#323597,1.); +#323597 = DIRECTION('',(-0.866030055796,-0.499991942392,0.)); +#323598 = PLANE('',#323599); +#323599 = AXIS2_PLACEMENT_3D('',#323600,#323601,#323602); +#323600 = CARTESIAN_POINT('',(124.842387,-89.299235,0.)); +#323601 = DIRECTION('',(-0.499991942392,0.866030055796,0.)); +#323602 = DIRECTION('',(-0.866030055796,-0.499991942392,0.)); +#323603 = ADVANCED_FACE('',(#323604),#323631,.F.); +#323604 = FACE_BOUND('',#323605,.F.); +#323605 = EDGE_LOOP('',(#323606,#323616,#323623,#323624)); +#323606 = ORIENTED_EDGE('',*,*,#323607,.T.); +#323607 = EDGE_CURVE('',#323608,#323610,#323612,.T.); +#323608 = VERTEX_POINT('',#323609); +#323609 = CARTESIAN_POINT('',(136.412255,-108.2,0.)); +#323610 = VERTEX_POINT('',#323611); +#323611 = CARTESIAN_POINT('',(136.412255,-108.2,-3.5E-02)); +#323612 = LINE('',#323613,#323614); +#323613 = CARTESIAN_POINT('',(136.412255,-108.2,0.)); +#323614 = VECTOR('',#323615,1.); +#323615 = DIRECTION('',(0.,0.,-1.)); +#323616 = ORIENTED_EDGE('',*,*,#323617,.T.); +#323617 = EDGE_CURVE('',#323610,#323610,#323618,.T.); +#323618 = CIRCLE('',#323619,0.137255); +#323619 = AXIS2_PLACEMENT_3D('',#323620,#323621,#323622); +#323620 = CARTESIAN_POINT('',(136.275,-108.2,-3.5E-02)); +#323621 = DIRECTION('',(0.,0.,1.)); +#323622 = DIRECTION('',(1.,0.,-0.)); +#323623 = ORIENTED_EDGE('',*,*,#323607,.F.); +#323624 = ORIENTED_EDGE('',*,*,#323625,.F.); +#323625 = EDGE_CURVE('',#323608,#323608,#323626,.T.); +#323626 = CIRCLE('',#323627,0.137255); +#323627 = AXIS2_PLACEMENT_3D('',#323628,#323629,#323630); +#323628 = CARTESIAN_POINT('',(136.275,-108.2,0.)); +#323629 = DIRECTION('',(0.,0.,1.)); +#323630 = DIRECTION('',(1.,0.,-0.)); +#323631 = CYLINDRICAL_SURFACE('',#323632,0.137255); +#323632 = AXIS2_PLACEMENT_3D('',#323633,#323634,#323635); +#323633 = CARTESIAN_POINT('',(136.275,-108.2,0.)); +#323634 = DIRECTION('',(0.,0.,1.)); +#323635 = DIRECTION('',(1.,0.,-0.)); +#323636 = ADVANCED_FACE('',(#323637),#323664,.F.); +#323637 = FACE_BOUND('',#323638,.F.); +#323638 = EDGE_LOOP('',(#323639,#323649,#323656,#323657)); +#323639 = ORIENTED_EDGE('',*,*,#323640,.T.); +#323640 = EDGE_CURVE('',#323641,#323643,#323645,.T.); +#323641 = VERTEX_POINT('',#323642); +#323642 = CARTESIAN_POINT('',(124.797014,-89.061229,0.)); +#323643 = VERTEX_POINT('',#323644); +#323644 = CARTESIAN_POINT('',(124.797014,-89.061229,-3.5E-02)); +#323645 = LINE('',#323646,#323647); +#323646 = CARTESIAN_POINT('',(124.797014,-89.061229,0.)); +#323647 = VECTOR('',#323648,1.); +#323648 = DIRECTION('',(0.,0.,-1.)); +#323649 = ORIENTED_EDGE('',*,*,#323650,.T.); +#323650 = EDGE_CURVE('',#323643,#323643,#323651,.T.); +#323651 = CIRCLE('',#323652,0.137255); +#323652 = AXIS2_PLACEMENT_3D('',#323653,#323654,#323655); +#323653 = CARTESIAN_POINT('',(124.659759,-89.061229,-3.5E-02)); +#323654 = DIRECTION('',(0.,0.,1.)); +#323655 = DIRECTION('',(1.,0.,-0.)); +#323656 = ORIENTED_EDGE('',*,*,#323640,.F.); +#323657 = ORIENTED_EDGE('',*,*,#323658,.F.); +#323658 = EDGE_CURVE('',#323641,#323641,#323659,.T.); +#323659 = CIRCLE('',#323660,0.137255); +#323660 = AXIS2_PLACEMENT_3D('',#323661,#323662,#323663); +#323661 = CARTESIAN_POINT('',(124.659759,-89.061229,0.)); +#323662 = DIRECTION('',(0.,0.,1.)); +#323663 = DIRECTION('',(1.,0.,-0.)); +#323664 = CYLINDRICAL_SURFACE('',#323665,0.137255); +#323665 = AXIS2_PLACEMENT_3D('',#323666,#323667,#323668); +#323666 = CARTESIAN_POINT('',(124.659759,-89.061229,0.)); +#323667 = DIRECTION('',(0.,0.,1.)); +#323668 = DIRECTION('',(1.,0.,-0.)); +#323669 = ADVANCED_FACE('',(#323670,#323707,#323710),#323713,.F.); +#323670 = FACE_BOUND('',#323671,.F.); +#323671 = EDGE_LOOP('',(#323672,#323673,#323674,#323675,#323676,#323677, + #323678,#323679,#323680,#323681,#323682,#323683,#323684,#323685, + #323686,#323687,#323688,#323689,#323690,#323691,#323692,#323693, + #323694,#323695,#323696,#323697,#323698,#323699,#323700,#323701, + #323702,#323703,#323704,#323705,#323706)); +#323672 = ORIENTED_EDGE('',*,*,#322538,.T.); +#323673 = ORIENTED_EDGE('',*,*,#322569,.T.); +#323674 = ORIENTED_EDGE('',*,*,#322600,.T.); +#323675 = ORIENTED_EDGE('',*,*,#322631,.T.); +#323676 = ORIENTED_EDGE('',*,*,#322662,.T.); +#323677 = ORIENTED_EDGE('',*,*,#322693,.T.); +#323678 = ORIENTED_EDGE('',*,*,#322724,.T.); +#323679 = ORIENTED_EDGE('',*,*,#322756,.T.); +#323680 = ORIENTED_EDGE('',*,*,#322788,.T.); +#323681 = ORIENTED_EDGE('',*,*,#322819,.T.); +#323682 = ORIENTED_EDGE('',*,*,#322850,.T.); +#323683 = ORIENTED_EDGE('',*,*,#322881,.T.); +#323684 = ORIENTED_EDGE('',*,*,#322912,.T.); +#323685 = ORIENTED_EDGE('',*,*,#322944,.T.); +#323686 = ORIENTED_EDGE('',*,*,#322976,.T.); +#323687 = ORIENTED_EDGE('',*,*,#323007,.T.); +#323688 = ORIENTED_EDGE('',*,*,#323038,.T.); +#323689 = ORIENTED_EDGE('',*,*,#323069,.T.); +#323690 = ORIENTED_EDGE('',*,*,#323100,.T.); +#323691 = ORIENTED_EDGE('',*,*,#323131,.T.); +#323692 = ORIENTED_EDGE('',*,*,#323162,.T.); +#323693 = ORIENTED_EDGE('',*,*,#323194,.T.); +#323694 = ORIENTED_EDGE('',*,*,#323226,.T.); +#323695 = ORIENTED_EDGE('',*,*,#323257,.T.); +#323696 = ORIENTED_EDGE('',*,*,#323288,.T.); +#323697 = ORIENTED_EDGE('',*,*,#323319,.T.); +#323698 = ORIENTED_EDGE('',*,*,#323350,.T.); +#323699 = ORIENTED_EDGE('',*,*,#323381,.T.); +#323700 = ORIENTED_EDGE('',*,*,#323412,.T.); +#323701 = ORIENTED_EDGE('',*,*,#323444,.T.); +#323702 = ORIENTED_EDGE('',*,*,#323476,.T.); +#323703 = ORIENTED_EDGE('',*,*,#323507,.T.); +#323704 = ORIENTED_EDGE('',*,*,#323538,.T.); +#323705 = ORIENTED_EDGE('',*,*,#323570,.T.); +#323706 = ORIENTED_EDGE('',*,*,#323593,.T.); +#323707 = FACE_BOUND('',#323708,.F.); +#323708 = EDGE_LOOP('',(#323709)); +#323709 = ORIENTED_EDGE('',*,*,#323625,.T.); +#323710 = FACE_BOUND('',#323711,.F.); +#323711 = EDGE_LOOP('',(#323712)); +#323712 = ORIENTED_EDGE('',*,*,#323658,.T.); +#323713 = PLANE('',#323714); +#323714 = AXIS2_PLACEMENT_3D('',#323715,#323716,#323717); +#323715 = CARTESIAN_POINT('',(0.,0.,0.)); +#323716 = DIRECTION('',(-0.,-0.,-1.)); +#323717 = DIRECTION('',(-1.,0.,0.)); +#323718 = ADVANCED_FACE('',(#323719,#323756,#323759),#323762,.T.); +#323719 = FACE_BOUND('',#323720,.T.); +#323720 = EDGE_LOOP('',(#323721,#323722,#323723,#323724,#323725,#323726, + #323727,#323728,#323729,#323730,#323731,#323732,#323733,#323734, + #323735,#323736,#323737,#323738,#323739,#323740,#323741,#323742, + #323743,#323744,#323745,#323746,#323747,#323748,#323749,#323750, + #323751,#323752,#323753,#323754,#323755)); +#323721 = ORIENTED_EDGE('',*,*,#322522,.T.); +#323722 = ORIENTED_EDGE('',*,*,#322553,.T.); +#323723 = ORIENTED_EDGE('',*,*,#322584,.T.); +#323724 = ORIENTED_EDGE('',*,*,#322615,.T.); +#323725 = ORIENTED_EDGE('',*,*,#322646,.T.); +#323726 = ORIENTED_EDGE('',*,*,#322677,.T.); +#323727 = ORIENTED_EDGE('',*,*,#322708,.T.); +#323728 = ORIENTED_EDGE('',*,*,#322739,.T.); +#323729 = ORIENTED_EDGE('',*,*,#322772,.T.); +#323730 = ORIENTED_EDGE('',*,*,#322803,.T.); +#323731 = ORIENTED_EDGE('',*,*,#322834,.T.); +#323732 = ORIENTED_EDGE('',*,*,#322865,.T.); +#323733 = ORIENTED_EDGE('',*,*,#322896,.T.); +#323734 = ORIENTED_EDGE('',*,*,#322927,.T.); +#323735 = ORIENTED_EDGE('',*,*,#322960,.T.); +#323736 = ORIENTED_EDGE('',*,*,#322991,.T.); +#323737 = ORIENTED_EDGE('',*,*,#323022,.T.); +#323738 = ORIENTED_EDGE('',*,*,#323053,.T.); +#323739 = ORIENTED_EDGE('',*,*,#323084,.T.); +#323740 = ORIENTED_EDGE('',*,*,#323115,.T.); +#323741 = ORIENTED_EDGE('',*,*,#323146,.T.); +#323742 = ORIENTED_EDGE('',*,*,#323177,.T.); +#323743 = ORIENTED_EDGE('',*,*,#323210,.T.); +#323744 = ORIENTED_EDGE('',*,*,#323241,.T.); +#323745 = ORIENTED_EDGE('',*,*,#323272,.T.); +#323746 = ORIENTED_EDGE('',*,*,#323303,.T.); +#323747 = ORIENTED_EDGE('',*,*,#323334,.T.); +#323748 = ORIENTED_EDGE('',*,*,#323365,.T.); +#323749 = ORIENTED_EDGE('',*,*,#323396,.T.); +#323750 = ORIENTED_EDGE('',*,*,#323427,.T.); +#323751 = ORIENTED_EDGE('',*,*,#323460,.T.); +#323752 = ORIENTED_EDGE('',*,*,#323491,.T.); +#323753 = ORIENTED_EDGE('',*,*,#323522,.T.); +#323754 = ORIENTED_EDGE('',*,*,#323553,.T.); +#323755 = ORIENTED_EDGE('',*,*,#323586,.T.); +#323756 = FACE_BOUND('',#323757,.T.); +#323757 = EDGE_LOOP('',(#323758)); +#323758 = ORIENTED_EDGE('',*,*,#323617,.T.); +#323759 = FACE_BOUND('',#323760,.T.); +#323760 = EDGE_LOOP('',(#323761)); +#323761 = ORIENTED_EDGE('',*,*,#323650,.T.); +#323762 = PLANE('',#323763); +#323763 = AXIS2_PLACEMENT_3D('',#323764,#323765,#323766); +#323764 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#323765 = DIRECTION('',(-0.,-0.,-1.)); +#323766 = DIRECTION('',(-1.,0.,0.)); +#323767 = MANIFOLD_SOLID_BREP('',#323768); +#323768 = CLOSED_SHELL('',(#323769,#323809,#323840,#323871,#323902, + #323933,#323964,#323995,#324026,#324057,#324088,#324119,#324150, + #324181,#324212,#324243,#324274,#324307,#324338,#324369,#324400, + #324431,#324462,#324493,#324524,#324555,#324586,#324619,#324650, + #324681,#324712,#324743,#324776,#324798,#324831,#324875)); +#323769 = ADVANCED_FACE('',(#323770),#323804,.T.); +#323770 = FACE_BOUND('',#323771,.T.); +#323771 = EDGE_LOOP('',(#323772,#323782,#323790,#323798)); +#323772 = ORIENTED_EDGE('',*,*,#323773,.T.); +#323773 = EDGE_CURVE('',#323774,#323776,#323778,.T.); +#323774 = VERTEX_POINT('',#323775); +#323775 = CARTESIAN_POINT('',(131.3695,-87.478078,1.51)); +#323776 = VERTEX_POINT('',#323777); +#323777 = CARTESIAN_POINT('',(131.3695,-87.478078,1.545)); +#323778 = LINE('',#323779,#323780); +#323779 = CARTESIAN_POINT('',(131.3695,-87.478078,1.51)); +#323780 = VECTOR('',#323781,1.); +#323781 = DIRECTION('',(0.,0.,1.)); +#323782 = ORIENTED_EDGE('',*,*,#323783,.T.); +#323783 = EDGE_CURVE('',#323776,#323784,#323786,.T.); +#323784 = VERTEX_POINT('',#323785); +#323785 = CARTESIAN_POINT('',(132.833147,-88.944443,1.545)); +#323786 = LINE('',#323787,#323788); +#323787 = CARTESIAN_POINT('',(131.3695,-87.478078,1.545)); +#323788 = VECTOR('',#323789,1.); +#323789 = DIRECTION('',(0.70645053581,-0.707762418085,0.)); +#323790 = ORIENTED_EDGE('',*,*,#323791,.F.); +#323791 = EDGE_CURVE('',#323792,#323784,#323794,.T.); +#323792 = VERTEX_POINT('',#323793); +#323793 = CARTESIAN_POINT('',(132.833147,-88.944443,1.51)); +#323794 = LINE('',#323795,#323796); +#323795 = CARTESIAN_POINT('',(132.833147,-88.944443,1.51)); +#323796 = VECTOR('',#323797,1.); +#323797 = DIRECTION('',(0.,0.,1.)); +#323798 = ORIENTED_EDGE('',*,*,#323799,.F.); +#323799 = EDGE_CURVE('',#323774,#323792,#323800,.T.); +#323800 = LINE('',#323801,#323802); +#323801 = CARTESIAN_POINT('',(131.3695,-87.478078,1.51)); +#323802 = VECTOR('',#323803,1.); +#323803 = DIRECTION('',(0.70645053581,-0.707762418085,0.)); +#323804 = PLANE('',#323805); +#323805 = AXIS2_PLACEMENT_3D('',#323806,#323807,#323808); +#323806 = CARTESIAN_POINT('',(131.3695,-87.478078,1.51)); +#323807 = DIRECTION('',(0.707762418085,0.70645053581,-0.)); +#323808 = DIRECTION('',(0.70645053581,-0.707762418085,0.)); +#323809 = ADVANCED_FACE('',(#323810),#323835,.T.); +#323810 = FACE_BOUND('',#323811,.T.); +#323811 = EDGE_LOOP('',(#323812,#323813,#323821,#323829)); +#323812 = ORIENTED_EDGE('',*,*,#323791,.T.); +#323813 = ORIENTED_EDGE('',*,*,#323814,.T.); +#323814 = EDGE_CURVE('',#323784,#323815,#323817,.T.); +#323815 = VERTEX_POINT('',#323816); +#323816 = CARTESIAN_POINT('',(132.848079,-88.980491,1.545)); +#323817 = LINE('',#323818,#323819); +#323818 = CARTESIAN_POINT('',(132.833147,-88.944443,1.545)); +#323819 = VECTOR('',#323820,1.); +#323820 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323821 = ORIENTED_EDGE('',*,*,#323822,.F.); +#323822 = EDGE_CURVE('',#323823,#323815,#323825,.T.); +#323823 = VERTEX_POINT('',#323824); +#323824 = CARTESIAN_POINT('',(132.848079,-88.980491,1.51)); +#323825 = LINE('',#323826,#323827); +#323826 = CARTESIAN_POINT('',(132.848079,-88.980491,1.51)); +#323827 = VECTOR('',#323828,1.); +#323828 = DIRECTION('',(0.,0.,1.)); +#323829 = ORIENTED_EDGE('',*,*,#323830,.F.); +#323830 = EDGE_CURVE('',#323792,#323823,#323831,.T.); +#323831 = LINE('',#323832,#323833); +#323832 = CARTESIAN_POINT('',(132.833147,-88.944443,1.51)); +#323833 = VECTOR('',#323834,1.); +#323834 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323835 = PLANE('',#323836); +#323836 = AXIS2_PLACEMENT_3D('',#323837,#323838,#323839); +#323837 = CARTESIAN_POINT('',(132.833147,-88.944443,1.51)); +#323838 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#323839 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323840 = ADVANCED_FACE('',(#323841),#323866,.T.); +#323841 = FACE_BOUND('',#323842,.T.); +#323842 = EDGE_LOOP('',(#323843,#323844,#323852,#323860)); +#323843 = ORIENTED_EDGE('',*,*,#323822,.T.); +#323844 = ORIENTED_EDGE('',*,*,#323845,.T.); +#323845 = EDGE_CURVE('',#323815,#323846,#323848,.T.); +#323846 = VERTEX_POINT('',#323847); +#323847 = CARTESIAN_POINT('',(132.848079,-92.872812,1.545)); +#323848 = LINE('',#323849,#323850); +#323849 = CARTESIAN_POINT('',(132.848079,-88.980491,1.545)); +#323850 = VECTOR('',#323851,1.); +#323851 = DIRECTION('',(0.,-1.,0.)); +#323852 = ORIENTED_EDGE('',*,*,#323853,.F.); +#323853 = EDGE_CURVE('',#323854,#323846,#323856,.T.); +#323854 = VERTEX_POINT('',#323855); +#323855 = CARTESIAN_POINT('',(132.848079,-92.872812,1.51)); +#323856 = LINE('',#323857,#323858); +#323857 = CARTESIAN_POINT('',(132.848079,-92.872812,1.51)); +#323858 = VECTOR('',#323859,1.); +#323859 = DIRECTION('',(0.,0.,1.)); +#323860 = ORIENTED_EDGE('',*,*,#323861,.F.); +#323861 = EDGE_CURVE('',#323823,#323854,#323862,.T.); +#323862 = LINE('',#323863,#323864); +#323863 = CARTESIAN_POINT('',(132.848079,-88.980491,1.51)); +#323864 = VECTOR('',#323865,1.); +#323865 = DIRECTION('',(0.,-1.,0.)); +#323866 = PLANE('',#323867); +#323867 = AXIS2_PLACEMENT_3D('',#323868,#323869,#323870); +#323868 = CARTESIAN_POINT('',(132.848079,-88.980491,1.51)); +#323869 = DIRECTION('',(1.,0.,-0.)); +#323870 = DIRECTION('',(0.,-1.,0.)); +#323871 = ADVANCED_FACE('',(#323872),#323897,.T.); +#323872 = FACE_BOUND('',#323873,.T.); +#323873 = EDGE_LOOP('',(#323874,#323875,#323883,#323891)); +#323874 = ORIENTED_EDGE('',*,*,#323853,.T.); +#323875 = ORIENTED_EDGE('',*,*,#323876,.T.); +#323876 = EDGE_CURVE('',#323846,#323877,#323879,.T.); +#323877 = VERTEX_POINT('',#323878); +#323878 = CARTESIAN_POINT('',(132.833147,-92.90886,1.545)); +#323879 = LINE('',#323880,#323881); +#323880 = CARTESIAN_POINT('',(132.848079,-92.872812,1.545)); +#323881 = VECTOR('',#323882,1.); +#323882 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#323883 = ORIENTED_EDGE('',*,*,#323884,.F.); +#323884 = EDGE_CURVE('',#323885,#323877,#323887,.T.); +#323885 = VERTEX_POINT('',#323886); +#323886 = CARTESIAN_POINT('',(132.833147,-92.90886,1.51)); +#323887 = LINE('',#323888,#323889); +#323888 = CARTESIAN_POINT('',(132.833147,-92.90886,1.51)); +#323889 = VECTOR('',#323890,1.); +#323890 = DIRECTION('',(0.,0.,1.)); +#323891 = ORIENTED_EDGE('',*,*,#323892,.F.); +#323892 = EDGE_CURVE('',#323854,#323885,#323893,.T.); +#323893 = LINE('',#323894,#323895); +#323894 = CARTESIAN_POINT('',(132.848079,-92.872812,1.51)); +#323895 = VECTOR('',#323896,1.); +#323896 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#323897 = PLANE('',#323898); +#323898 = AXIS2_PLACEMENT_3D('',#323899,#323900,#323901); +#323899 = CARTESIAN_POINT('',(132.848079,-92.872812,1.51)); +#323900 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#323901 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#323902 = ADVANCED_FACE('',(#323903),#323928,.T.); +#323903 = FACE_BOUND('',#323904,.T.); +#323904 = EDGE_LOOP('',(#323905,#323906,#323914,#323922)); +#323905 = ORIENTED_EDGE('',*,*,#323884,.T.); +#323906 = ORIENTED_EDGE('',*,*,#323907,.T.); +#323907 = EDGE_CURVE('',#323877,#323908,#323910,.T.); +#323908 = VERTEX_POINT('',#323909); +#323909 = CARTESIAN_POINT('',(131.968809,-93.775916,1.545)); +#323910 = LINE('',#323911,#323912); +#323911 = CARTESIAN_POINT('',(132.833147,-92.90886,1.545)); +#323912 = VECTOR('',#323913,1.); +#323913 = DIRECTION('',(-0.705995871478,-0.708215948321,0.)); +#323914 = ORIENTED_EDGE('',*,*,#323915,.F.); +#323915 = EDGE_CURVE('',#323916,#323908,#323918,.T.); +#323916 = VERTEX_POINT('',#323917); +#323917 = CARTESIAN_POINT('',(131.968809,-93.775916,1.51)); +#323918 = LINE('',#323919,#323920); +#323919 = CARTESIAN_POINT('',(131.968809,-93.775916,1.51)); +#323920 = VECTOR('',#323921,1.); +#323921 = DIRECTION('',(0.,0.,1.)); +#323922 = ORIENTED_EDGE('',*,*,#323923,.F.); +#323923 = EDGE_CURVE('',#323885,#323916,#323924,.T.); +#323924 = LINE('',#323925,#323926); +#323925 = CARTESIAN_POINT('',(132.833147,-92.90886,1.51)); +#323926 = VECTOR('',#323927,1.); +#323927 = DIRECTION('',(-0.705995871478,-0.708215948321,0.)); +#323928 = PLANE('',#323929); +#323929 = AXIS2_PLACEMENT_3D('',#323930,#323931,#323932); +#323930 = CARTESIAN_POINT('',(132.833147,-92.90886,1.51)); +#323931 = DIRECTION('',(0.708215948321,-0.705995871478,0.)); +#323932 = DIRECTION('',(-0.705995871478,-0.708215948321,0.)); +#323933 = ADVANCED_FACE('',(#323934),#323959,.T.); +#323934 = FACE_BOUND('',#323935,.T.); +#323935 = EDGE_LOOP('',(#323936,#323937,#323945,#323953)); +#323936 = ORIENTED_EDGE('',*,*,#323915,.T.); +#323937 = ORIENTED_EDGE('',*,*,#323938,.T.); +#323938 = EDGE_CURVE('',#323908,#323939,#323941,.T.); +#323939 = VERTEX_POINT('',#323940); +#323940 = CARTESIAN_POINT('',(132.833147,-94.642972,1.545)); +#323941 = LINE('',#323942,#323943); +#323942 = CARTESIAN_POINT('',(131.968809,-93.775916,1.545)); +#323943 = VECTOR('',#323944,1.); +#323944 = DIRECTION('',(0.705995871478,-0.708215948321,0.)); +#323945 = ORIENTED_EDGE('',*,*,#323946,.F.); +#323946 = EDGE_CURVE('',#323947,#323939,#323949,.T.); +#323947 = VERTEX_POINT('',#323948); +#323948 = CARTESIAN_POINT('',(132.833147,-94.642972,1.51)); +#323949 = LINE('',#323950,#323951); +#323950 = CARTESIAN_POINT('',(132.833147,-94.642972,1.51)); +#323951 = VECTOR('',#323952,1.); +#323952 = DIRECTION('',(0.,0.,1.)); +#323953 = ORIENTED_EDGE('',*,*,#323954,.F.); +#323954 = EDGE_CURVE('',#323916,#323947,#323955,.T.); +#323955 = LINE('',#323956,#323957); +#323956 = CARTESIAN_POINT('',(131.968809,-93.775916,1.51)); +#323957 = VECTOR('',#323958,1.); +#323958 = DIRECTION('',(0.705995871478,-0.708215948321,0.)); +#323959 = PLANE('',#323960); +#323960 = AXIS2_PLACEMENT_3D('',#323961,#323962,#323963); +#323961 = CARTESIAN_POINT('',(131.968809,-93.775916,1.51)); +#323962 = DIRECTION('',(0.708215948321,0.705995871478,-0.)); +#323963 = DIRECTION('',(0.705995871478,-0.708215948321,0.)); +#323964 = ADVANCED_FACE('',(#323965),#323990,.T.); +#323965 = FACE_BOUND('',#323966,.T.); +#323966 = EDGE_LOOP('',(#323967,#323968,#323976,#323984)); +#323967 = ORIENTED_EDGE('',*,*,#323946,.T.); +#323968 = ORIENTED_EDGE('',*,*,#323969,.T.); +#323969 = EDGE_CURVE('',#323939,#323970,#323972,.T.); +#323970 = VERTEX_POINT('',#323971); +#323971 = CARTESIAN_POINT('',(132.848079,-94.67902,1.545)); +#323972 = LINE('',#323973,#323974); +#323973 = CARTESIAN_POINT('',(132.833147,-94.642972,1.545)); +#323974 = VECTOR('',#323975,1.); +#323975 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323976 = ORIENTED_EDGE('',*,*,#323977,.F.); +#323977 = EDGE_CURVE('',#323978,#323970,#323980,.T.); +#323978 = VERTEX_POINT('',#323979); +#323979 = CARTESIAN_POINT('',(132.848079,-94.67902,1.51)); +#323980 = LINE('',#323981,#323982); +#323981 = CARTESIAN_POINT('',(132.848079,-94.67902,1.51)); +#323982 = VECTOR('',#323983,1.); +#323983 = DIRECTION('',(0.,0.,1.)); +#323984 = ORIENTED_EDGE('',*,*,#323985,.F.); +#323985 = EDGE_CURVE('',#323947,#323978,#323986,.T.); +#323986 = LINE('',#323987,#323988); +#323987 = CARTESIAN_POINT('',(132.833147,-94.642972,1.51)); +#323988 = VECTOR('',#323989,1.); +#323989 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323990 = PLANE('',#323991); +#323991 = AXIS2_PLACEMENT_3D('',#323992,#323993,#323994); +#323992 = CARTESIAN_POINT('',(132.833147,-94.642972,1.51)); +#323993 = DIRECTION('',(0.923875640631,0.38269282806,-0.)); +#323994 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#323995 = ADVANCED_FACE('',(#323996),#324021,.T.); +#323996 = FACE_BOUND('',#323997,.T.); +#323997 = EDGE_LOOP('',(#323998,#323999,#324007,#324015)); +#323998 = ORIENTED_EDGE('',*,*,#323977,.T.); +#323999 = ORIENTED_EDGE('',*,*,#324000,.T.); +#324000 = EDGE_CURVE('',#323970,#324001,#324003,.T.); +#324001 = VERTEX_POINT('',#324002); +#324002 = CARTESIAN_POINT('',(132.848079,-108.519509,1.545)); +#324003 = LINE('',#324004,#324005); +#324004 = CARTESIAN_POINT('',(132.848079,-94.67902,1.545)); +#324005 = VECTOR('',#324006,1.); +#324006 = DIRECTION('',(0.,-1.,0.)); +#324007 = ORIENTED_EDGE('',*,*,#324008,.F.); +#324008 = EDGE_CURVE('',#324009,#324001,#324011,.T.); +#324009 = VERTEX_POINT('',#324010); +#324010 = CARTESIAN_POINT('',(132.848079,-108.519509,1.51)); +#324011 = LINE('',#324012,#324013); +#324012 = CARTESIAN_POINT('',(132.848079,-108.519509,1.51)); +#324013 = VECTOR('',#324014,1.); +#324014 = DIRECTION('',(0.,0.,1.)); +#324015 = ORIENTED_EDGE('',*,*,#324016,.F.); +#324016 = EDGE_CURVE('',#323978,#324009,#324017,.T.); +#324017 = LINE('',#324018,#324019); +#324018 = CARTESIAN_POINT('',(132.848079,-94.67902,1.51)); +#324019 = VECTOR('',#324020,1.); +#324020 = DIRECTION('',(0.,-1.,0.)); +#324021 = PLANE('',#324022); +#324022 = AXIS2_PLACEMENT_3D('',#324023,#324024,#324025); +#324023 = CARTESIAN_POINT('',(132.848079,-94.67902,1.51)); +#324024 = DIRECTION('',(1.,0.,-0.)); +#324025 = DIRECTION('',(0.,-1.,0.)); +#324026 = ADVANCED_FACE('',(#324027),#324052,.T.); +#324027 = FACE_BOUND('',#324028,.T.); +#324028 = EDGE_LOOP('',(#324029,#324030,#324038,#324046)); +#324029 = ORIENTED_EDGE('',*,*,#324008,.T.); +#324030 = ORIENTED_EDGE('',*,*,#324031,.T.); +#324031 = EDGE_CURVE('',#324001,#324032,#324034,.T.); +#324032 = VERTEX_POINT('',#324033); +#324033 = CARTESIAN_POINT('',(132.833147,-108.555557,1.545)); +#324034 = LINE('',#324035,#324036); +#324035 = CARTESIAN_POINT('',(132.848079,-108.519509,1.545)); +#324036 = VECTOR('',#324037,1.); +#324037 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324038 = ORIENTED_EDGE('',*,*,#324039,.F.); +#324039 = EDGE_CURVE('',#324040,#324032,#324042,.T.); +#324040 = VERTEX_POINT('',#324041); +#324041 = CARTESIAN_POINT('',(132.833147,-108.555557,1.51)); +#324042 = LINE('',#324043,#324044); +#324043 = CARTESIAN_POINT('',(132.833147,-108.555557,1.51)); +#324044 = VECTOR('',#324045,1.); +#324045 = DIRECTION('',(0.,0.,1.)); +#324046 = ORIENTED_EDGE('',*,*,#324047,.F.); +#324047 = EDGE_CURVE('',#324009,#324040,#324048,.T.); +#324048 = LINE('',#324049,#324050); +#324049 = CARTESIAN_POINT('',(132.848079,-108.519509,1.51)); +#324050 = VECTOR('',#324051,1.); +#324051 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324052 = PLANE('',#324053); +#324053 = AXIS2_PLACEMENT_3D('',#324054,#324055,#324056); +#324054 = CARTESIAN_POINT('',(132.848079,-108.519509,1.51)); +#324055 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#324056 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324057 = ADVANCED_FACE('',(#324058),#324083,.T.); +#324058 = FACE_BOUND('',#324059,.T.); +#324059 = EDGE_LOOP('',(#324060,#324061,#324069,#324077)); +#324060 = ORIENTED_EDGE('',*,*,#324039,.T.); +#324061 = ORIENTED_EDGE('',*,*,#324062,.T.); +#324062 = EDGE_CURVE('',#324032,#324063,#324065,.T.); +#324063 = VERTEX_POINT('',#324064); +#324064 = CARTESIAN_POINT('',(132.4,-108.991422,1.545)); +#324065 = LINE('',#324066,#324067); +#324066 = CARTESIAN_POINT('',(132.833147,-108.555557,1.545)); +#324067 = VECTOR('',#324068,1.); +#324068 = DIRECTION('',(-0.70489172272,-0.709314922471,0.)); +#324069 = ORIENTED_EDGE('',*,*,#324070,.F.); +#324070 = EDGE_CURVE('',#324071,#324063,#324073,.T.); +#324071 = VERTEX_POINT('',#324072); +#324072 = CARTESIAN_POINT('',(132.4,-108.991422,1.51)); +#324073 = LINE('',#324074,#324075); +#324074 = CARTESIAN_POINT('',(132.4,-108.991422,1.51)); +#324075 = VECTOR('',#324076,1.); +#324076 = DIRECTION('',(0.,0.,1.)); +#324077 = ORIENTED_EDGE('',*,*,#324078,.F.); +#324078 = EDGE_CURVE('',#324040,#324071,#324079,.T.); +#324079 = LINE('',#324080,#324081); +#324080 = CARTESIAN_POINT('',(132.833147,-108.555557,1.51)); +#324081 = VECTOR('',#324082,1.); +#324082 = DIRECTION('',(-0.70489172272,-0.709314922471,0.)); +#324083 = PLANE('',#324084); +#324084 = AXIS2_PLACEMENT_3D('',#324085,#324086,#324087); +#324085 = CARTESIAN_POINT('',(132.833147,-108.555557,1.51)); +#324086 = DIRECTION('',(0.709314922471,-0.70489172272,0.)); +#324087 = DIRECTION('',(-0.70489172272,-0.709314922471,0.)); +#324088 = ADVANCED_FACE('',(#324089),#324114,.T.); +#324089 = FACE_BOUND('',#324090,.T.); +#324090 = EDGE_LOOP('',(#324091,#324092,#324100,#324108)); +#324091 = ORIENTED_EDGE('',*,*,#324070,.T.); +#324092 = ORIENTED_EDGE('',*,*,#324093,.T.); +#324093 = EDGE_CURVE('',#324063,#324094,#324096,.T.); +#324094 = VERTEX_POINT('',#324095); +#324095 = CARTESIAN_POINT('',(132.398079,-124.085195,1.545)); +#324096 = LINE('',#324097,#324098); +#324097 = CARTESIAN_POINT('',(132.4,-108.991422,1.545)); +#324098 = VECTOR('',#324099,1.); +#324099 = DIRECTION('',(-1.272710265652E-04,-0.999999991901,0.)); +#324100 = ORIENTED_EDGE('',*,*,#324101,.F.); +#324101 = EDGE_CURVE('',#324102,#324094,#324104,.T.); +#324102 = VERTEX_POINT('',#324103); +#324103 = CARTESIAN_POINT('',(132.398079,-124.085195,1.51)); +#324104 = LINE('',#324105,#324106); +#324105 = CARTESIAN_POINT('',(132.398079,-124.085195,1.51)); +#324106 = VECTOR('',#324107,1.); +#324107 = DIRECTION('',(0.,0.,1.)); +#324108 = ORIENTED_EDGE('',*,*,#324109,.F.); +#324109 = EDGE_CURVE('',#324071,#324102,#324110,.T.); +#324110 = LINE('',#324111,#324112); +#324111 = CARTESIAN_POINT('',(132.4,-108.991422,1.51)); +#324112 = VECTOR('',#324113,1.); +#324113 = DIRECTION('',(-1.272710265652E-04,-0.999999991901,0.)); +#324114 = PLANE('',#324115); +#324115 = AXIS2_PLACEMENT_3D('',#324116,#324117,#324118); +#324116 = CARTESIAN_POINT('',(132.4,-108.991422,1.51)); +#324117 = DIRECTION('',(0.999999991901,-1.272710265652E-04,0.)); +#324118 = DIRECTION('',(-1.272710265652E-04,-0.999999991901,0.)); +#324119 = ADVANCED_FACE('',(#324120),#324145,.T.); +#324120 = FACE_BOUND('',#324121,.T.); +#324121 = EDGE_LOOP('',(#324122,#324123,#324131,#324139)); +#324122 = ORIENTED_EDGE('',*,*,#324101,.T.); +#324123 = ORIENTED_EDGE('',*,*,#324124,.T.); +#324124 = EDGE_CURVE('',#324094,#324125,#324127,.T.); +#324125 = VERTEX_POINT('',#324126); +#324126 = CARTESIAN_POINT('',(132.383147,-124.121243,1.545)); +#324127 = LINE('',#324128,#324129); +#324128 = CARTESIAN_POINT('',(132.398079,-124.085195,1.545)); +#324129 = VECTOR('',#324130,1.); +#324130 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324131 = ORIENTED_EDGE('',*,*,#324132,.F.); +#324132 = EDGE_CURVE('',#324133,#324125,#324135,.T.); +#324133 = VERTEX_POINT('',#324134); +#324134 = CARTESIAN_POINT('',(132.383147,-124.121243,1.51)); +#324135 = LINE('',#324136,#324137); +#324136 = CARTESIAN_POINT('',(132.383147,-124.121243,1.51)); +#324137 = VECTOR('',#324138,1.); +#324138 = DIRECTION('',(0.,0.,1.)); +#324139 = ORIENTED_EDGE('',*,*,#324140,.F.); +#324140 = EDGE_CURVE('',#324102,#324133,#324141,.T.); +#324141 = LINE('',#324142,#324143); +#324142 = CARTESIAN_POINT('',(132.398079,-124.085195,1.51)); +#324143 = VECTOR('',#324144,1.); +#324144 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324145 = PLANE('',#324146); +#324146 = AXIS2_PLACEMENT_3D('',#324147,#324148,#324149); +#324147 = CARTESIAN_POINT('',(132.398079,-124.085195,1.51)); +#324148 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#324149 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#324150 = ADVANCED_FACE('',(#324151),#324176,.T.); +#324151 = FACE_BOUND('',#324152,.T.); +#324152 = EDGE_LOOP('',(#324153,#324154,#324162,#324170)); +#324153 = ORIENTED_EDGE('',*,*,#324132,.T.); +#324154 = ORIENTED_EDGE('',*,*,#324155,.T.); +#324155 = EDGE_CURVE('',#324125,#324156,#324158,.T.); +#324156 = VERTEX_POINT('',#324157); +#324157 = CARTESIAN_POINT('',(130.871243,-125.633147,1.545)); +#324158 = LINE('',#324159,#324160); +#324159 = CARTESIAN_POINT('',(132.383147,-124.121243,1.545)); +#324160 = VECTOR('',#324161,1.); +#324161 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#324162 = ORIENTED_EDGE('',*,*,#324163,.F.); +#324163 = EDGE_CURVE('',#324164,#324156,#324166,.T.); +#324164 = VERTEX_POINT('',#324165); +#324165 = CARTESIAN_POINT('',(130.871243,-125.633147,1.51)); +#324166 = LINE('',#324167,#324168); +#324167 = CARTESIAN_POINT('',(130.871243,-125.633147,1.51)); +#324168 = VECTOR('',#324169,1.); +#324169 = DIRECTION('',(0.,0.,1.)); +#324170 = ORIENTED_EDGE('',*,*,#324171,.F.); +#324171 = EDGE_CURVE('',#324133,#324164,#324172,.T.); +#324172 = LINE('',#324173,#324174); +#324173 = CARTESIAN_POINT('',(132.383147,-124.121243,1.51)); +#324174 = VECTOR('',#324175,1.); +#324175 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#324176 = PLANE('',#324177); +#324177 = AXIS2_PLACEMENT_3D('',#324178,#324179,#324180); +#324178 = CARTESIAN_POINT('',(132.383147,-124.121243,1.51)); +#324179 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#324180 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#324181 = ADVANCED_FACE('',(#324182),#324207,.T.); +#324182 = FACE_BOUND('',#324183,.T.); +#324183 = EDGE_LOOP('',(#324184,#324185,#324193,#324201)); +#324184 = ORIENTED_EDGE('',*,*,#324163,.T.); +#324185 = ORIENTED_EDGE('',*,*,#324186,.T.); +#324186 = EDGE_CURVE('',#324156,#324187,#324189,.T.); +#324187 = VERTEX_POINT('',#324188); +#324188 = CARTESIAN_POINT('',(130.835195,-125.648079,1.545)); +#324189 = LINE('',#324190,#324191); +#324190 = CARTESIAN_POINT('',(130.871243,-125.633147,1.545)); +#324191 = VECTOR('',#324192,1.); +#324192 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#324193 = ORIENTED_EDGE('',*,*,#324194,.F.); +#324194 = EDGE_CURVE('',#324195,#324187,#324197,.T.); +#324195 = VERTEX_POINT('',#324196); +#324196 = CARTESIAN_POINT('',(130.835195,-125.648079,1.51)); +#324197 = LINE('',#324198,#324199); +#324198 = CARTESIAN_POINT('',(130.835195,-125.648079,1.51)); +#324199 = VECTOR('',#324200,1.); +#324200 = DIRECTION('',(0.,0.,1.)); +#324201 = ORIENTED_EDGE('',*,*,#324202,.F.); +#324202 = EDGE_CURVE('',#324164,#324195,#324203,.T.); +#324203 = LINE('',#324204,#324205); +#324204 = CARTESIAN_POINT('',(130.871243,-125.633147,1.51)); +#324205 = VECTOR('',#324206,1.); +#324206 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#324207 = PLANE('',#324208); +#324208 = AXIS2_PLACEMENT_3D('',#324209,#324210,#324211); +#324209 = CARTESIAN_POINT('',(130.871243,-125.633147,1.51)); +#324210 = DIRECTION('',(0.38269282806,-0.923875640631,0.)); +#324211 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#324212 = ADVANCED_FACE('',(#324213),#324238,.T.); +#324213 = FACE_BOUND('',#324214,.T.); +#324214 = EDGE_LOOP('',(#324215,#324216,#324224,#324232)); +#324215 = ORIENTED_EDGE('',*,*,#324194,.T.); +#324216 = ORIENTED_EDGE('',*,*,#324217,.T.); +#324217 = EDGE_CURVE('',#324187,#324218,#324220,.T.); +#324218 = VERTEX_POINT('',#324219); +#324219 = CARTESIAN_POINT('',(127.991421,-125.65,1.545)); +#324220 = LINE('',#324221,#324222); +#324221 = CARTESIAN_POINT('',(130.835195,-125.648079,1.545)); +#324222 = VECTOR('',#324223,1.); +#324223 = DIRECTION('',(-0.999999771843,-6.755106283832E-04,0.)); +#324224 = ORIENTED_EDGE('',*,*,#324225,.F.); +#324225 = EDGE_CURVE('',#324226,#324218,#324228,.T.); +#324226 = VERTEX_POINT('',#324227); +#324227 = CARTESIAN_POINT('',(127.991421,-125.65,1.51)); +#324228 = LINE('',#324229,#324230); +#324229 = CARTESIAN_POINT('',(127.991421,-125.65,1.51)); +#324230 = VECTOR('',#324231,1.); +#324231 = DIRECTION('',(0.,0.,1.)); +#324232 = ORIENTED_EDGE('',*,*,#324233,.F.); +#324233 = EDGE_CURVE('',#324195,#324226,#324234,.T.); +#324234 = LINE('',#324235,#324236); +#324235 = CARTESIAN_POINT('',(130.835195,-125.648079,1.51)); +#324236 = VECTOR('',#324237,1.); +#324237 = DIRECTION('',(-0.999999771843,-6.755106283832E-04,0.)); +#324238 = PLANE('',#324239); +#324239 = AXIS2_PLACEMENT_3D('',#324240,#324241,#324242); +#324240 = CARTESIAN_POINT('',(130.835195,-125.648079,1.51)); +#324241 = DIRECTION('',(6.755106283832E-04,-0.999999771843,0.)); +#324242 = DIRECTION('',(-0.999999771843,-6.755106283832E-04,0.)); +#324243 = ADVANCED_FACE('',(#324244),#324269,.T.); +#324244 = FACE_BOUND('',#324245,.T.); +#324245 = EDGE_LOOP('',(#324246,#324247,#324255,#324263)); +#324246 = ORIENTED_EDGE('',*,*,#324225,.T.); +#324247 = ORIENTED_EDGE('',*,*,#324248,.T.); +#324248 = EDGE_CURVE('',#324218,#324249,#324251,.T.); +#324249 = VERTEX_POINT('',#324250); +#324250 = CARTESIAN_POINT('',(126.375645,-127.263507,1.545)); +#324251 = LINE('',#324252,#324253); +#324252 = CARTESIAN_POINT('',(127.991421,-125.65,1.545)); +#324253 = VECTOR('',#324254,1.); +#324254 = DIRECTION('',(-0.707603442901,-0.706609770379,0.)); +#324255 = ORIENTED_EDGE('',*,*,#324256,.F.); +#324256 = EDGE_CURVE('',#324257,#324249,#324259,.T.); +#324257 = VERTEX_POINT('',#324258); +#324258 = CARTESIAN_POINT('',(126.375645,-127.263507,1.51)); +#324259 = LINE('',#324260,#324261); +#324260 = CARTESIAN_POINT('',(126.375645,-127.263507,1.51)); +#324261 = VECTOR('',#324262,1.); +#324262 = DIRECTION('',(0.,0.,1.)); +#324263 = ORIENTED_EDGE('',*,*,#324264,.F.); +#324264 = EDGE_CURVE('',#324226,#324257,#324265,.T.); +#324265 = LINE('',#324266,#324267); +#324266 = CARTESIAN_POINT('',(127.991421,-125.65,1.51)); +#324267 = VECTOR('',#324268,1.); +#324268 = DIRECTION('',(-0.707603442901,-0.706609770379,0.)); +#324269 = PLANE('',#324270); +#324270 = AXIS2_PLACEMENT_3D('',#324271,#324272,#324273); +#324271 = CARTESIAN_POINT('',(127.991421,-125.65,1.51)); +#324272 = DIRECTION('',(0.706609770379,-0.707603442901,0.)); +#324273 = DIRECTION('',(-0.707603442901,-0.706609770379,0.)); +#324274 = ADVANCED_FACE('',(#324275),#324302,.F.); +#324275 = FACE_BOUND('',#324276,.T.); +#324276 = EDGE_LOOP('',(#324277,#324278,#324287,#324295)); +#324277 = ORIENTED_EDGE('',*,*,#324256,.T.); +#324278 = ORIENTED_EDGE('',*,*,#324279,.T.); +#324279 = EDGE_CURVE('',#324249,#324280,#324282,.T.); +#324280 = VERTEX_POINT('',#324281); +#324281 = CARTESIAN_POINT('',(126.236777,-127.124518,1.545)); +#324282 = CIRCLE('',#324283,0.303472241153); +#324283 = AXIS2_PLACEMENT_3D('',#324284,#324285,#324286); +#324284 = CARTESIAN_POINT('',(126.10308955761,-127.3969571104,1.545)); +#324285 = DIRECTION('',(0.,0.,1.)); +#324286 = DIRECTION('',(0.898123140846,0.439744043595,-0.)); +#324287 = ORIENTED_EDGE('',*,*,#324288,.F.); +#324288 = EDGE_CURVE('',#324289,#324280,#324291,.T.); +#324289 = VERTEX_POINT('',#324290); +#324290 = CARTESIAN_POINT('',(126.236777,-127.124518,1.51)); +#324291 = LINE('',#324292,#324293); +#324292 = CARTESIAN_POINT('',(126.236777,-127.124518,1.51)); +#324293 = VECTOR('',#324294,1.); +#324294 = DIRECTION('',(0.,0.,1.)); +#324295 = ORIENTED_EDGE('',*,*,#324296,.F.); +#324296 = EDGE_CURVE('',#324257,#324289,#324297,.T.); +#324297 = CIRCLE('',#324298,0.303472241153); +#324298 = AXIS2_PLACEMENT_3D('',#324299,#324300,#324301); +#324299 = CARTESIAN_POINT('',(126.10308955761,-127.3969571104,1.51)); +#324300 = DIRECTION('',(0.,0.,1.)); +#324301 = DIRECTION('',(0.898123140846,0.439744043595,-0.)); +#324302 = CYLINDRICAL_SURFACE('',#324303,0.303472241153); +#324303 = AXIS2_PLACEMENT_3D('',#324304,#324305,#324306); +#324304 = CARTESIAN_POINT('',(126.10308955761,-127.3969571104,1.51)); +#324305 = DIRECTION('',(-0.,-0.,-1.)); +#324306 = DIRECTION('',(0.898123140846,0.439744043595,-0.)); +#324307 = ADVANCED_FACE('',(#324308),#324333,.T.); +#324308 = FACE_BOUND('',#324309,.T.); +#324309 = EDGE_LOOP('',(#324310,#324311,#324319,#324327)); +#324310 = ORIENTED_EDGE('',*,*,#324288,.T.); +#324311 = ORIENTED_EDGE('',*,*,#324312,.T.); +#324312 = EDGE_CURVE('',#324280,#324313,#324315,.T.); +#324313 = VERTEX_POINT('',#324314); +#324314 = CARTESIAN_POINT('',(127.894442,-125.466853,1.545)); +#324315 = LINE('',#324316,#324317); +#324316 = CARTESIAN_POINT('',(126.236777,-127.124518,1.545)); +#324317 = VECTOR('',#324318,1.); +#324318 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324319 = ORIENTED_EDGE('',*,*,#324320,.F.); +#324320 = EDGE_CURVE('',#324321,#324313,#324323,.T.); +#324321 = VERTEX_POINT('',#324322); +#324322 = CARTESIAN_POINT('',(127.894442,-125.466853,1.51)); +#324323 = LINE('',#324324,#324325); +#324324 = CARTESIAN_POINT('',(127.894442,-125.466853,1.51)); +#324325 = VECTOR('',#324326,1.); +#324326 = DIRECTION('',(0.,0.,1.)); +#324327 = ORIENTED_EDGE('',*,*,#324328,.F.); +#324328 = EDGE_CURVE('',#324289,#324321,#324329,.T.); +#324329 = LINE('',#324330,#324331); +#324330 = CARTESIAN_POINT('',(126.236777,-127.124518,1.51)); +#324331 = VECTOR('',#324332,1.); +#324332 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324333 = PLANE('',#324334); +#324334 = AXIS2_PLACEMENT_3D('',#324335,#324336,#324337); +#324335 = CARTESIAN_POINT('',(126.236777,-127.124518,1.51)); +#324336 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#324337 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324338 = ADVANCED_FACE('',(#324339),#324364,.T.); +#324339 = FACE_BOUND('',#324340,.T.); +#324340 = EDGE_LOOP('',(#324341,#324342,#324350,#324358)); +#324341 = ORIENTED_EDGE('',*,*,#324320,.T.); +#324342 = ORIENTED_EDGE('',*,*,#324343,.T.); +#324343 = EDGE_CURVE('',#324313,#324344,#324346,.T.); +#324344 = VERTEX_POINT('',#324345); +#324345 = CARTESIAN_POINT('',(127.930491,-125.451921,1.545)); +#324346 = LINE('',#324347,#324348); +#324347 = CARTESIAN_POINT('',(127.894442,-125.466853,1.545)); +#324348 = VECTOR('',#324349,1.); +#324349 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#324350 = ORIENTED_EDGE('',*,*,#324351,.F.); +#324351 = EDGE_CURVE('',#324352,#324344,#324354,.T.); +#324352 = VERTEX_POINT('',#324353); +#324353 = CARTESIAN_POINT('',(127.930491,-125.451921,1.51)); +#324354 = LINE('',#324355,#324356); +#324355 = CARTESIAN_POINT('',(127.930491,-125.451921,1.51)); +#324356 = VECTOR('',#324357,1.); +#324357 = DIRECTION('',(0.,0.,1.)); +#324358 = ORIENTED_EDGE('',*,*,#324359,.F.); +#324359 = EDGE_CURVE('',#324321,#324352,#324360,.T.); +#324360 = LINE('',#324361,#324362); +#324361 = CARTESIAN_POINT('',(127.894442,-125.466853,1.51)); +#324362 = VECTOR('',#324363,1.); +#324363 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#324364 = PLANE('',#324365); +#324365 = AXIS2_PLACEMENT_3D('',#324366,#324367,#324368); +#324366 = CARTESIAN_POINT('',(127.894442,-125.466853,1.51)); +#324367 = DIRECTION('',(-0.382683766838,0.923879393968,0.)); +#324368 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#324369 = ADVANCED_FACE('',(#324370),#324395,.T.); +#324370 = FACE_BOUND('',#324371,.T.); +#324371 = EDGE_LOOP('',(#324372,#324373,#324381,#324389)); +#324372 = ORIENTED_EDGE('',*,*,#324351,.T.); +#324373 = ORIENTED_EDGE('',*,*,#324374,.T.); +#324374 = EDGE_CURVE('',#324344,#324375,#324377,.T.); +#324375 = VERTEX_POINT('',#324376); +#324376 = CARTESIAN_POINT('',(130.774264,-125.45,1.545)); +#324377 = LINE('',#324378,#324379); +#324378 = CARTESIAN_POINT('',(127.930491,-125.451921,1.545)); +#324379 = VECTOR('',#324380,1.); +#324380 = DIRECTION('',(0.999999771843,6.755108659184E-04,0.)); +#324381 = ORIENTED_EDGE('',*,*,#324382,.F.); +#324382 = EDGE_CURVE('',#324383,#324375,#324385,.T.); +#324383 = VERTEX_POINT('',#324384); +#324384 = CARTESIAN_POINT('',(130.774264,-125.45,1.51)); +#324385 = LINE('',#324386,#324387); +#324386 = CARTESIAN_POINT('',(130.774264,-125.45,1.51)); +#324387 = VECTOR('',#324388,1.); +#324388 = DIRECTION('',(0.,0.,1.)); +#324389 = ORIENTED_EDGE('',*,*,#324390,.F.); +#324390 = EDGE_CURVE('',#324352,#324383,#324391,.T.); +#324391 = LINE('',#324392,#324393); +#324392 = CARTESIAN_POINT('',(127.930491,-125.451921,1.51)); +#324393 = VECTOR('',#324394,1.); +#324394 = DIRECTION('',(0.999999771843,6.755108659184E-04,0.)); +#324395 = PLANE('',#324396); +#324396 = AXIS2_PLACEMENT_3D('',#324397,#324398,#324399); +#324397 = CARTESIAN_POINT('',(127.930491,-125.451921,1.51)); +#324398 = DIRECTION('',(-6.755108659184E-04,0.999999771843,0.)); +#324399 = DIRECTION('',(0.999999771843,6.755108659184E-04,0.)); +#324400 = ADVANCED_FACE('',(#324401),#324426,.T.); +#324401 = FACE_BOUND('',#324402,.T.); +#324402 = EDGE_LOOP('',(#324403,#324404,#324412,#324420)); +#324403 = ORIENTED_EDGE('',*,*,#324382,.T.); +#324404 = ORIENTED_EDGE('',*,*,#324405,.T.); +#324405 = EDGE_CURVE('',#324375,#324406,#324408,.T.); +#324406 = VERTEX_POINT('',#324407); +#324407 = CARTESIAN_POINT('',(132.2,-124.024264,1.545)); +#324408 = LINE('',#324409,#324410); +#324409 = CARTESIAN_POINT('',(130.774264,-125.45,1.545)); +#324410 = VECTOR('',#324411,1.); +#324411 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324412 = ORIENTED_EDGE('',*,*,#324413,.F.); +#324413 = EDGE_CURVE('',#324414,#324406,#324416,.T.); +#324414 = VERTEX_POINT('',#324415); +#324415 = CARTESIAN_POINT('',(132.2,-124.024264,1.51)); +#324416 = LINE('',#324417,#324418); +#324417 = CARTESIAN_POINT('',(132.2,-124.024264,1.51)); +#324418 = VECTOR('',#324419,1.); +#324419 = DIRECTION('',(0.,0.,1.)); +#324420 = ORIENTED_EDGE('',*,*,#324421,.F.); +#324421 = EDGE_CURVE('',#324383,#324414,#324422,.T.); +#324422 = LINE('',#324423,#324424); +#324423 = CARTESIAN_POINT('',(130.774264,-125.45,1.51)); +#324424 = VECTOR('',#324425,1.); +#324425 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324426 = PLANE('',#324427); +#324427 = AXIS2_PLACEMENT_3D('',#324428,#324429,#324430); +#324428 = CARTESIAN_POINT('',(130.774264,-125.45,1.51)); +#324429 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#324430 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#324431 = ADVANCED_FACE('',(#324432),#324457,.T.); +#324432 = FACE_BOUND('',#324433,.T.); +#324433 = EDGE_LOOP('',(#324434,#324435,#324443,#324451)); +#324434 = ORIENTED_EDGE('',*,*,#324413,.T.); +#324435 = ORIENTED_EDGE('',*,*,#324436,.T.); +#324436 = EDGE_CURVE('',#324406,#324437,#324439,.T.); +#324437 = VERTEX_POINT('',#324438); +#324438 = CARTESIAN_POINT('',(132.201921,-108.930491,1.545)); +#324439 = LINE('',#324440,#324441); +#324440 = CARTESIAN_POINT('',(132.2,-124.024264,1.545)); +#324441 = VECTOR('',#324442,1.); +#324442 = DIRECTION('',(1.272710265652E-04,0.999999991901,0.)); +#324443 = ORIENTED_EDGE('',*,*,#324444,.F.); +#324444 = EDGE_CURVE('',#324445,#324437,#324447,.T.); +#324445 = VERTEX_POINT('',#324446); +#324446 = CARTESIAN_POINT('',(132.201921,-108.930491,1.51)); +#324447 = LINE('',#324448,#324449); +#324448 = CARTESIAN_POINT('',(132.201921,-108.930491,1.51)); +#324449 = VECTOR('',#324450,1.); +#324450 = DIRECTION('',(0.,0.,1.)); +#324451 = ORIENTED_EDGE('',*,*,#324452,.F.); +#324452 = EDGE_CURVE('',#324414,#324445,#324453,.T.); +#324453 = LINE('',#324454,#324455); +#324454 = CARTESIAN_POINT('',(132.2,-124.024264,1.51)); +#324455 = VECTOR('',#324456,1.); +#324456 = DIRECTION('',(1.272710265652E-04,0.999999991901,0.)); +#324457 = PLANE('',#324458); +#324458 = AXIS2_PLACEMENT_3D('',#324459,#324460,#324461); +#324459 = CARTESIAN_POINT('',(132.2,-124.024264,1.51)); +#324460 = DIRECTION('',(-0.999999991901,1.272710265652E-04,0.)); +#324461 = DIRECTION('',(1.272710265652E-04,0.999999991901,0.)); +#324462 = ADVANCED_FACE('',(#324463),#324488,.T.); +#324463 = FACE_BOUND('',#324464,.T.); +#324464 = EDGE_LOOP('',(#324465,#324466,#324474,#324482)); +#324465 = ORIENTED_EDGE('',*,*,#324444,.T.); +#324466 = ORIENTED_EDGE('',*,*,#324467,.T.); +#324467 = EDGE_CURVE('',#324437,#324468,#324470,.T.); +#324468 = VERTEX_POINT('',#324469); +#324469 = CARTESIAN_POINT('',(132.216853,-108.894443,1.545)); +#324470 = LINE('',#324471,#324472); +#324471 = CARTESIAN_POINT('',(132.201921,-108.930491,1.545)); +#324472 = VECTOR('',#324473,1.); +#324473 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#324474 = ORIENTED_EDGE('',*,*,#324475,.F.); +#324475 = EDGE_CURVE('',#324476,#324468,#324478,.T.); +#324476 = VERTEX_POINT('',#324477); +#324477 = CARTESIAN_POINT('',(132.216853,-108.894443,1.51)); +#324478 = LINE('',#324479,#324480); +#324479 = CARTESIAN_POINT('',(132.216853,-108.894443,1.51)); +#324480 = VECTOR('',#324481,1.); +#324481 = DIRECTION('',(0.,0.,1.)); +#324482 = ORIENTED_EDGE('',*,*,#324483,.F.); +#324483 = EDGE_CURVE('',#324445,#324476,#324484,.T.); +#324484 = LINE('',#324485,#324486); +#324485 = CARTESIAN_POINT('',(132.201921,-108.930491,1.51)); +#324486 = VECTOR('',#324487,1.); +#324487 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#324488 = PLANE('',#324489); +#324489 = AXIS2_PLACEMENT_3D('',#324490,#324491,#324492); +#324490 = CARTESIAN_POINT('',(132.201921,-108.930491,1.51)); +#324491 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#324492 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#324493 = ADVANCED_FACE('',(#324494),#324519,.T.); +#324494 = FACE_BOUND('',#324495,.T.); +#324495 = EDGE_LOOP('',(#324496,#324497,#324505,#324513)); +#324496 = ORIENTED_EDGE('',*,*,#324475,.T.); +#324497 = ORIENTED_EDGE('',*,*,#324498,.T.); +#324498 = EDGE_CURVE('',#324468,#324499,#324501,.T.); +#324499 = VERTEX_POINT('',#324500); +#324500 = CARTESIAN_POINT('',(132.65,-108.458578,1.545)); +#324501 = LINE('',#324502,#324503); +#324502 = CARTESIAN_POINT('',(132.216853,-108.894443,1.545)); +#324503 = VECTOR('',#324504,1.); +#324504 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#324505 = ORIENTED_EDGE('',*,*,#324506,.F.); +#324506 = EDGE_CURVE('',#324507,#324499,#324509,.T.); +#324507 = VERTEX_POINT('',#324508); +#324508 = CARTESIAN_POINT('',(132.65,-108.458578,1.51)); +#324509 = LINE('',#324510,#324511); +#324510 = CARTESIAN_POINT('',(132.65,-108.458578,1.51)); +#324511 = VECTOR('',#324512,1.); +#324512 = DIRECTION('',(0.,0.,1.)); +#324513 = ORIENTED_EDGE('',*,*,#324514,.F.); +#324514 = EDGE_CURVE('',#324476,#324507,#324515,.T.); +#324515 = LINE('',#324516,#324517); +#324516 = CARTESIAN_POINT('',(132.216853,-108.894443,1.51)); +#324517 = VECTOR('',#324518,1.); +#324518 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#324519 = PLANE('',#324520); +#324520 = AXIS2_PLACEMENT_3D('',#324521,#324522,#324523); +#324521 = CARTESIAN_POINT('',(132.216853,-108.894443,1.51)); +#324522 = DIRECTION('',(-0.709314922471,0.704891722721,0.)); +#324523 = DIRECTION('',(0.704891722721,0.709314922471,0.)); +#324524 = ADVANCED_FACE('',(#324525),#324550,.T.); +#324525 = FACE_BOUND('',#324526,.T.); +#324526 = EDGE_LOOP('',(#324527,#324528,#324536,#324544)); +#324527 = ORIENTED_EDGE('',*,*,#324506,.T.); +#324528 = ORIENTED_EDGE('',*,*,#324529,.T.); +#324529 = EDGE_CURVE('',#324499,#324530,#324532,.T.); +#324530 = VERTEX_POINT('',#324531); +#324531 = CARTESIAN_POINT('',(132.65,-94.739951,1.545)); +#324532 = LINE('',#324533,#324534); +#324533 = CARTESIAN_POINT('',(132.65,-108.458578,1.545)); +#324534 = VECTOR('',#324535,1.); +#324535 = DIRECTION('',(0.,1.,0.)); +#324536 = ORIENTED_EDGE('',*,*,#324537,.F.); +#324537 = EDGE_CURVE('',#324538,#324530,#324540,.T.); +#324538 = VERTEX_POINT('',#324539); +#324539 = CARTESIAN_POINT('',(132.65,-94.739951,1.51)); +#324540 = LINE('',#324541,#324542); +#324541 = CARTESIAN_POINT('',(132.65,-94.739951,1.51)); +#324542 = VECTOR('',#324543,1.); +#324543 = DIRECTION('',(0.,0.,1.)); +#324544 = ORIENTED_EDGE('',*,*,#324545,.F.); +#324545 = EDGE_CURVE('',#324507,#324538,#324546,.T.); +#324546 = LINE('',#324547,#324548); +#324547 = CARTESIAN_POINT('',(132.65,-108.458578,1.51)); +#324548 = VECTOR('',#324549,1.); +#324549 = DIRECTION('',(0.,1.,0.)); +#324550 = PLANE('',#324551); +#324551 = AXIS2_PLACEMENT_3D('',#324552,#324553,#324554); +#324552 = CARTESIAN_POINT('',(132.65,-108.458578,1.51)); +#324553 = DIRECTION('',(-1.,0.,0.)); +#324554 = DIRECTION('',(0.,1.,0.)); +#324555 = ADVANCED_FACE('',(#324556),#324581,.T.); +#324556 = FACE_BOUND('',#324557,.T.); +#324557 = EDGE_LOOP('',(#324558,#324559,#324567,#324575)); +#324558 = ORIENTED_EDGE('',*,*,#324537,.T.); +#324559 = ORIENTED_EDGE('',*,*,#324560,.T.); +#324560 = EDGE_CURVE('',#324530,#324561,#324563,.T.); +#324561 = VERTEX_POINT('',#324562); +#324562 = CARTESIAN_POINT('',(131.74424,-93.831473,1.545)); +#324563 = LINE('',#324564,#324565); +#324564 = CARTESIAN_POINT('',(132.65,-94.739951,1.545)); +#324565 = VECTOR('',#324566,1.); +#324566 = DIRECTION('',(-0.706046637076,0.708165338232,0.)); +#324567 = ORIENTED_EDGE('',*,*,#324568,.F.); +#324568 = EDGE_CURVE('',#324569,#324561,#324571,.T.); +#324569 = VERTEX_POINT('',#324570); +#324570 = CARTESIAN_POINT('',(131.74424,-93.831473,1.51)); +#324571 = LINE('',#324572,#324573); +#324572 = CARTESIAN_POINT('',(131.74424,-93.831473,1.51)); +#324573 = VECTOR('',#324574,1.); +#324574 = DIRECTION('',(0.,0.,1.)); +#324575 = ORIENTED_EDGE('',*,*,#324576,.F.); +#324576 = EDGE_CURVE('',#324538,#324569,#324577,.T.); +#324577 = LINE('',#324578,#324579); +#324578 = CARTESIAN_POINT('',(132.65,-94.739951,1.51)); +#324579 = VECTOR('',#324580,1.); +#324580 = DIRECTION('',(-0.706046637076,0.708165338232,0.)); +#324581 = PLANE('',#324582); +#324582 = AXIS2_PLACEMENT_3D('',#324583,#324584,#324585); +#324583 = CARTESIAN_POINT('',(132.65,-94.739951,1.51)); +#324584 = DIRECTION('',(-0.708165338232,-0.706046637076,0.)); +#324585 = DIRECTION('',(-0.706046637076,0.708165338232,0.)); +#324586 = ADVANCED_FACE('',(#324587),#324614,.T.); +#324587 = FACE_BOUND('',#324588,.T.); +#324588 = EDGE_LOOP('',(#324589,#324590,#324599,#324607)); +#324589 = ORIENTED_EDGE('',*,*,#324568,.T.); +#324590 = ORIENTED_EDGE('',*,*,#324591,.T.); +#324591 = EDGE_CURVE('',#324561,#324592,#324594,.T.); +#324592 = VERTEX_POINT('',#324593); +#324593 = CARTESIAN_POINT('',(131.74424,-93.720359,1.545)); +#324594 = CIRCLE('',#324595,9.99975841413E-02); +#324595 = AXIS2_PLACEMENT_3D('',#324596,#324597,#324598); +#324596 = CARTESIAN_POINT('',(131.82738407125,-93.775916,1.545)); +#324597 = DIRECTION('',(0.,0.,-1.)); +#324598 = DIRECTION('',(-0.831460799482,-0.55558342211,-0.)); +#324599 = ORIENTED_EDGE('',*,*,#324600,.F.); +#324600 = EDGE_CURVE('',#324601,#324592,#324603,.T.); +#324601 = VERTEX_POINT('',#324602); +#324602 = CARTESIAN_POINT('',(131.74424,-93.720359,1.51)); +#324603 = LINE('',#324604,#324605); +#324604 = CARTESIAN_POINT('',(131.74424,-93.720359,1.51)); +#324605 = VECTOR('',#324606,1.); +#324606 = DIRECTION('',(0.,0.,1.)); +#324607 = ORIENTED_EDGE('',*,*,#324608,.F.); +#324608 = EDGE_CURVE('',#324569,#324601,#324609,.T.); +#324609 = CIRCLE('',#324610,9.99975841413E-02); +#324610 = AXIS2_PLACEMENT_3D('',#324611,#324612,#324613); +#324611 = CARTESIAN_POINT('',(131.82738407125,-93.775916,1.51)); +#324612 = DIRECTION('',(0.,0.,-1.)); +#324613 = DIRECTION('',(-0.831460799482,-0.55558342211,-0.)); +#324614 = CYLINDRICAL_SURFACE('',#324615,9.99975841413E-02); +#324615 = AXIS2_PLACEMENT_3D('',#324616,#324617,#324618); +#324616 = CARTESIAN_POINT('',(131.82738407125,-93.775916,1.51)); +#324617 = DIRECTION('',(0.,0.,-1.)); +#324618 = DIRECTION('',(-0.831460799482,-0.55558342211,-0.)); +#324619 = ADVANCED_FACE('',(#324620),#324645,.T.); +#324620 = FACE_BOUND('',#324621,.T.); +#324621 = EDGE_LOOP('',(#324622,#324623,#324631,#324639)); +#324622 = ORIENTED_EDGE('',*,*,#324600,.T.); +#324623 = ORIENTED_EDGE('',*,*,#324624,.T.); +#324624 = EDGE_CURVE('',#324592,#324625,#324627,.T.); +#324625 = VERTEX_POINT('',#324626); +#324626 = CARTESIAN_POINT('',(132.65,-92.811881,1.545)); +#324627 = LINE('',#324628,#324629); +#324628 = CARTESIAN_POINT('',(131.74424,-93.720359,1.545)); +#324629 = VECTOR('',#324630,1.); +#324630 = DIRECTION('',(0.706046637076,0.708165338232,0.)); +#324631 = ORIENTED_EDGE('',*,*,#324632,.F.); +#324632 = EDGE_CURVE('',#324633,#324625,#324635,.T.); +#324633 = VERTEX_POINT('',#324634); +#324634 = CARTESIAN_POINT('',(132.65,-92.811881,1.51)); +#324635 = LINE('',#324636,#324637); +#324636 = CARTESIAN_POINT('',(132.65,-92.811881,1.51)); +#324637 = VECTOR('',#324638,1.); +#324638 = DIRECTION('',(0.,0.,1.)); +#324639 = ORIENTED_EDGE('',*,*,#324640,.F.); +#324640 = EDGE_CURVE('',#324601,#324633,#324641,.T.); +#324641 = LINE('',#324642,#324643); +#324642 = CARTESIAN_POINT('',(131.74424,-93.720359,1.51)); +#324643 = VECTOR('',#324644,1.); +#324644 = DIRECTION('',(0.706046637076,0.708165338232,0.)); +#324645 = PLANE('',#324646); +#324646 = AXIS2_PLACEMENT_3D('',#324647,#324648,#324649); +#324647 = CARTESIAN_POINT('',(131.74424,-93.720359,1.51)); +#324648 = DIRECTION('',(-0.708165338232,0.706046637076,0.)); +#324649 = DIRECTION('',(0.706046637076,0.708165338232,0.)); +#324650 = ADVANCED_FACE('',(#324651),#324676,.T.); +#324651 = FACE_BOUND('',#324652,.T.); +#324652 = EDGE_LOOP('',(#324653,#324654,#324662,#324670)); +#324653 = ORIENTED_EDGE('',*,*,#324632,.T.); +#324654 = ORIENTED_EDGE('',*,*,#324655,.T.); +#324655 = EDGE_CURVE('',#324625,#324656,#324658,.T.); +#324656 = VERTEX_POINT('',#324657); +#324657 = CARTESIAN_POINT('',(132.65,-89.041421,1.545)); +#324658 = LINE('',#324659,#324660); +#324659 = CARTESIAN_POINT('',(132.65,-92.811881,1.545)); +#324660 = VECTOR('',#324661,1.); +#324661 = DIRECTION('',(0.,1.,0.)); +#324662 = ORIENTED_EDGE('',*,*,#324663,.F.); +#324663 = EDGE_CURVE('',#324664,#324656,#324666,.T.); +#324664 = VERTEX_POINT('',#324665); +#324665 = CARTESIAN_POINT('',(132.65,-89.041421,1.51)); +#324666 = LINE('',#324667,#324668); +#324667 = CARTESIAN_POINT('',(132.65,-89.041421,1.51)); +#324668 = VECTOR('',#324669,1.); +#324669 = DIRECTION('',(0.,0.,1.)); +#324670 = ORIENTED_EDGE('',*,*,#324671,.F.); +#324671 = EDGE_CURVE('',#324633,#324664,#324672,.T.); +#324672 = LINE('',#324673,#324674); +#324673 = CARTESIAN_POINT('',(132.65,-92.811881,1.51)); +#324674 = VECTOR('',#324675,1.); +#324675 = DIRECTION('',(0.,1.,0.)); +#324676 = PLANE('',#324677); +#324677 = AXIS2_PLACEMENT_3D('',#324678,#324679,#324680); +#324678 = CARTESIAN_POINT('',(132.65,-92.811881,1.51)); +#324679 = DIRECTION('',(-1.,0.,0.)); +#324680 = DIRECTION('',(0.,1.,0.)); +#324681 = ADVANCED_FACE('',(#324682),#324707,.T.); +#324682 = FACE_BOUND('',#324683,.T.); +#324683 = EDGE_LOOP('',(#324684,#324685,#324693,#324701)); +#324684 = ORIENTED_EDGE('',*,*,#324663,.T.); +#324685 = ORIENTED_EDGE('',*,*,#324686,.T.); +#324686 = EDGE_CURVE('',#324656,#324687,#324689,.T.); +#324687 = VERTEX_POINT('',#324688); +#324688 = CARTESIAN_POINT('',(131.228078,-87.6195,1.545)); +#324689 = LINE('',#324690,#324691); +#324690 = CARTESIAN_POINT('',(132.65,-89.041421,1.545)); +#324691 = VECTOR('',#324692,1.); +#324692 = DIRECTION('',(-0.707107029831,0.707106532542,0.)); +#324693 = ORIENTED_EDGE('',*,*,#324694,.F.); +#324694 = EDGE_CURVE('',#324695,#324687,#324697,.T.); +#324695 = VERTEX_POINT('',#324696); +#324696 = CARTESIAN_POINT('',(131.228078,-87.6195,1.51)); +#324697 = LINE('',#324698,#324699); +#324698 = CARTESIAN_POINT('',(131.228078,-87.6195,1.51)); +#324699 = VECTOR('',#324700,1.); +#324700 = DIRECTION('',(0.,0.,1.)); +#324701 = ORIENTED_EDGE('',*,*,#324702,.F.); +#324702 = EDGE_CURVE('',#324664,#324695,#324703,.T.); +#324703 = LINE('',#324704,#324705); +#324704 = CARTESIAN_POINT('',(132.65,-89.041421,1.51)); +#324705 = VECTOR('',#324706,1.); +#324706 = DIRECTION('',(-0.707107029831,0.707106532542,0.)); +#324707 = PLANE('',#324708); +#324708 = AXIS2_PLACEMENT_3D('',#324709,#324710,#324711); +#324709 = CARTESIAN_POINT('',(132.65,-89.041421,1.51)); +#324710 = DIRECTION('',(-0.707106532542,-0.707107029831,0.)); +#324711 = DIRECTION('',(-0.707107029831,0.707106532542,0.)); +#324712 = ADVANCED_FACE('',(#324713),#324738,.T.); +#324713 = FACE_BOUND('',#324714,.T.); +#324714 = EDGE_LOOP('',(#324715,#324716,#324724,#324732)); +#324715 = ORIENTED_EDGE('',*,*,#324694,.T.); +#324716 = ORIENTED_EDGE('',*,*,#324717,.T.); +#324717 = EDGE_CURVE('',#324687,#324718,#324720,.T.); +#324718 = VERTEX_POINT('',#324719); +#324719 = CARTESIAN_POINT('',(131.214805,-87.627164,1.545)); +#324720 = LINE('',#324721,#324722); +#324721 = CARTESIAN_POINT('',(131.228078,-87.6195,1.545)); +#324722 = VECTOR('',#324723,1.); +#324723 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#324724 = ORIENTED_EDGE('',*,*,#324725,.F.); +#324725 = EDGE_CURVE('',#324726,#324718,#324728,.T.); +#324726 = VERTEX_POINT('',#324727); +#324727 = CARTESIAN_POINT('',(131.214805,-87.627164,1.51)); +#324728 = LINE('',#324729,#324730); +#324729 = CARTESIAN_POINT('',(131.214805,-87.627164,1.51)); +#324730 = VECTOR('',#324731,1.); +#324731 = DIRECTION('',(0.,0.,1.)); +#324732 = ORIENTED_EDGE('',*,*,#324733,.F.); +#324733 = EDGE_CURVE('',#324695,#324726,#324734,.T.); +#324734 = LINE('',#324735,#324736); +#324735 = CARTESIAN_POINT('',(131.228078,-87.6195,1.51)); +#324736 = VECTOR('',#324737,1.); +#324737 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#324738 = PLANE('',#324739); +#324739 = AXIS2_PLACEMENT_3D('',#324740,#324741,#324742); +#324740 = CARTESIAN_POINT('',(131.228078,-87.6195,1.51)); +#324741 = DIRECTION('',(0.500040608684,-0.866001957081,0.)); +#324742 = DIRECTION('',(-0.866001957081,-0.500040608684,0.)); +#324743 = ADVANCED_FACE('',(#324744),#324771,.T.); +#324744 = FACE_BOUND('',#324745,.T.); +#324745 = EDGE_LOOP('',(#324746,#324747,#324756,#324764)); +#324746 = ORIENTED_EDGE('',*,*,#324725,.T.); +#324747 = ORIENTED_EDGE('',*,*,#324748,.T.); +#324748 = EDGE_CURVE('',#324718,#324749,#324751,.T.); +#324749 = VERTEX_POINT('',#324750); +#324750 = CARTESIAN_POINT('',(131.377164,-87.464805,1.545)); +#324751 = CIRCLE('',#324752,0.300000118202); +#324752 = AXIS2_PLACEMENT_3D('',#324753,#324754,#324755); +#324753 = CARTESIAN_POINT('',(131.1,-87.35,1.545)); +#324754 = DIRECTION('',(0.,0.,-1.)); +#324755 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#324756 = ORIENTED_EDGE('',*,*,#324757,.F.); +#324757 = EDGE_CURVE('',#324758,#324749,#324760,.T.); +#324758 = VERTEX_POINT('',#324759); +#324759 = CARTESIAN_POINT('',(131.377164,-87.464805,1.51)); +#324760 = LINE('',#324761,#324762); +#324761 = CARTESIAN_POINT('',(131.377164,-87.464805,1.51)); +#324762 = VECTOR('',#324763,1.); +#324763 = DIRECTION('',(0.,0.,1.)); +#324764 = ORIENTED_EDGE('',*,*,#324765,.F.); +#324765 = EDGE_CURVE('',#324726,#324758,#324766,.T.); +#324766 = CIRCLE('',#324767,0.300000118202); +#324767 = AXIS2_PLACEMENT_3D('',#324768,#324769,#324770); +#324768 = CARTESIAN_POINT('',(131.1,-87.35,1.51)); +#324769 = DIRECTION('',(0.,0.,-1.)); +#324770 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#324771 = CYLINDRICAL_SURFACE('',#324772,0.300000118202); +#324772 = AXIS2_PLACEMENT_3D('',#324773,#324774,#324775); +#324773 = CARTESIAN_POINT('',(131.1,-87.35,1.51)); +#324774 = DIRECTION('',(0.,0.,-1.)); +#324775 = DIRECTION('',(0.382683182554,-0.923879635986,0.)); +#324776 = ADVANCED_FACE('',(#324777),#324793,.T.); +#324777 = FACE_BOUND('',#324778,.T.); +#324778 = EDGE_LOOP('',(#324779,#324780,#324786,#324787)); +#324779 = ORIENTED_EDGE('',*,*,#324757,.T.); +#324780 = ORIENTED_EDGE('',*,*,#324781,.T.); +#324781 = EDGE_CURVE('',#324749,#323776,#324782,.T.); +#324782 = LINE('',#324783,#324784); +#324783 = CARTESIAN_POINT('',(131.377164,-87.464805,1.545)); +#324784 = VECTOR('',#324785,1.); +#324785 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#324786 = ORIENTED_EDGE('',*,*,#323773,.F.); +#324787 = ORIENTED_EDGE('',*,*,#324788,.F.); +#324788 = EDGE_CURVE('',#324758,#323774,#324789,.T.); +#324789 = LINE('',#324790,#324791); +#324790 = CARTESIAN_POINT('',(131.377164,-87.464805,1.51)); +#324791 = VECTOR('',#324792,1.); +#324792 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#324793 = PLANE('',#324794); +#324794 = AXIS2_PLACEMENT_3D('',#324795,#324796,#324797); +#324795 = CARTESIAN_POINT('',(131.377164,-87.464805,1.51)); +#324796 = DIRECTION('',(0.86600195708,-0.500040608684,0.)); +#324797 = DIRECTION('',(-0.500040608684,-0.86600195708,0.)); +#324798 = ADVANCED_FACE('',(#324799),#324826,.F.); +#324799 = FACE_BOUND('',#324800,.T.); +#324800 = EDGE_LOOP('',(#324801,#324811,#324818,#324819)); +#324801 = ORIENTED_EDGE('',*,*,#324802,.T.); +#324802 = EDGE_CURVE('',#324803,#324805,#324807,.T.); +#324803 = VERTEX_POINT('',#324804); +#324804 = CARTESIAN_POINT('',(131.237255,-87.35,1.51)); +#324805 = VERTEX_POINT('',#324806); +#324806 = CARTESIAN_POINT('',(131.237255,-87.35,1.545)); +#324807 = LINE('',#324808,#324809); +#324808 = CARTESIAN_POINT('',(131.237255,-87.35,1.51)); +#324809 = VECTOR('',#324810,1.); +#324810 = DIRECTION('',(0.,0.,1.)); +#324811 = ORIENTED_EDGE('',*,*,#324812,.T.); +#324812 = EDGE_CURVE('',#324805,#324805,#324813,.T.); +#324813 = CIRCLE('',#324814,0.137255); +#324814 = AXIS2_PLACEMENT_3D('',#324815,#324816,#324817); +#324815 = CARTESIAN_POINT('',(131.1,-87.35,1.545)); +#324816 = DIRECTION('',(0.,0.,1.)); +#324817 = DIRECTION('',(1.,0.,-0.)); +#324818 = ORIENTED_EDGE('',*,*,#324802,.F.); +#324819 = ORIENTED_EDGE('',*,*,#324820,.F.); +#324820 = EDGE_CURVE('',#324803,#324803,#324821,.T.); +#324821 = CIRCLE('',#324822,0.137255); +#324822 = AXIS2_PLACEMENT_3D('',#324823,#324824,#324825); +#324823 = CARTESIAN_POINT('',(131.1,-87.35,1.51)); +#324824 = DIRECTION('',(0.,0.,1.)); +#324825 = DIRECTION('',(1.,0.,-0.)); +#324826 = CYLINDRICAL_SURFACE('',#324827,0.137255); +#324827 = AXIS2_PLACEMENT_3D('',#324828,#324829,#324830); +#324828 = CARTESIAN_POINT('',(131.1,-87.35,1.51)); +#324829 = DIRECTION('',(-0.,-0.,-1.)); +#324830 = DIRECTION('',(1.,0.,-0.)); +#324831 = ADVANCED_FACE('',(#324832,#324867),#324870,.F.); +#324832 = FACE_BOUND('',#324833,.T.); +#324833 = EDGE_LOOP('',(#324834,#324835,#324836,#324837,#324838,#324839, + #324840,#324841,#324842,#324843,#324844,#324845,#324846,#324847, + #324848,#324849,#324850,#324851,#324852,#324853,#324854,#324855, + #324856,#324857,#324858,#324859,#324860,#324861,#324862,#324863, + #324864,#324865,#324866)); +#324834 = ORIENTED_EDGE('',*,*,#323799,.T.); +#324835 = ORIENTED_EDGE('',*,*,#323830,.T.); +#324836 = ORIENTED_EDGE('',*,*,#323861,.T.); +#324837 = ORIENTED_EDGE('',*,*,#323892,.T.); +#324838 = ORIENTED_EDGE('',*,*,#323923,.T.); +#324839 = ORIENTED_EDGE('',*,*,#323954,.T.); +#324840 = ORIENTED_EDGE('',*,*,#323985,.T.); +#324841 = ORIENTED_EDGE('',*,*,#324016,.T.); +#324842 = ORIENTED_EDGE('',*,*,#324047,.T.); +#324843 = ORIENTED_EDGE('',*,*,#324078,.T.); +#324844 = ORIENTED_EDGE('',*,*,#324109,.T.); +#324845 = ORIENTED_EDGE('',*,*,#324140,.T.); +#324846 = ORIENTED_EDGE('',*,*,#324171,.T.); +#324847 = ORIENTED_EDGE('',*,*,#324202,.T.); +#324848 = ORIENTED_EDGE('',*,*,#324233,.T.); +#324849 = ORIENTED_EDGE('',*,*,#324264,.T.); +#324850 = ORIENTED_EDGE('',*,*,#324296,.T.); +#324851 = ORIENTED_EDGE('',*,*,#324328,.T.); +#324852 = ORIENTED_EDGE('',*,*,#324359,.T.); +#324853 = ORIENTED_EDGE('',*,*,#324390,.T.); +#324854 = ORIENTED_EDGE('',*,*,#324421,.T.); +#324855 = ORIENTED_EDGE('',*,*,#324452,.T.); +#324856 = ORIENTED_EDGE('',*,*,#324483,.T.); +#324857 = ORIENTED_EDGE('',*,*,#324514,.T.); +#324858 = ORIENTED_EDGE('',*,*,#324545,.T.); +#324859 = ORIENTED_EDGE('',*,*,#324576,.T.); +#324860 = ORIENTED_EDGE('',*,*,#324608,.T.); +#324861 = ORIENTED_EDGE('',*,*,#324640,.T.); +#324862 = ORIENTED_EDGE('',*,*,#324671,.T.); +#324863 = ORIENTED_EDGE('',*,*,#324702,.T.); +#324864 = ORIENTED_EDGE('',*,*,#324733,.T.); +#324865 = ORIENTED_EDGE('',*,*,#324765,.T.); +#324866 = ORIENTED_EDGE('',*,*,#324788,.T.); +#324867 = FACE_BOUND('',#324868,.T.); +#324868 = EDGE_LOOP('',(#324869)); +#324869 = ORIENTED_EDGE('',*,*,#324820,.T.); +#324870 = PLANE('',#324871); +#324871 = AXIS2_PLACEMENT_3D('',#324872,#324873,#324874); +#324872 = CARTESIAN_POINT('',(0.,0.,1.51)); +#324873 = DIRECTION('',(0.,0.,1.)); +#324874 = DIRECTION('',(1.,0.,-0.)); +#324875 = ADVANCED_FACE('',(#324876,#324911),#324914,.T.); +#324876 = FACE_BOUND('',#324877,.F.); +#324877 = EDGE_LOOP('',(#324878,#324879,#324880,#324881,#324882,#324883, + #324884,#324885,#324886,#324887,#324888,#324889,#324890,#324891, + #324892,#324893,#324894,#324895,#324896,#324897,#324898,#324899, + #324900,#324901,#324902,#324903,#324904,#324905,#324906,#324907, + #324908,#324909,#324910)); +#324878 = ORIENTED_EDGE('',*,*,#323783,.T.); +#324879 = ORIENTED_EDGE('',*,*,#323814,.T.); +#324880 = ORIENTED_EDGE('',*,*,#323845,.T.); +#324881 = ORIENTED_EDGE('',*,*,#323876,.T.); +#324882 = ORIENTED_EDGE('',*,*,#323907,.T.); +#324883 = ORIENTED_EDGE('',*,*,#323938,.T.); +#324884 = ORIENTED_EDGE('',*,*,#323969,.T.); +#324885 = ORIENTED_EDGE('',*,*,#324000,.T.); +#324886 = ORIENTED_EDGE('',*,*,#324031,.T.); +#324887 = ORIENTED_EDGE('',*,*,#324062,.T.); +#324888 = ORIENTED_EDGE('',*,*,#324093,.T.); +#324889 = ORIENTED_EDGE('',*,*,#324124,.T.); +#324890 = ORIENTED_EDGE('',*,*,#324155,.T.); +#324891 = ORIENTED_EDGE('',*,*,#324186,.T.); +#324892 = ORIENTED_EDGE('',*,*,#324217,.T.); +#324893 = ORIENTED_EDGE('',*,*,#324248,.T.); +#324894 = ORIENTED_EDGE('',*,*,#324279,.T.); +#324895 = ORIENTED_EDGE('',*,*,#324312,.T.); +#324896 = ORIENTED_EDGE('',*,*,#324343,.T.); +#324897 = ORIENTED_EDGE('',*,*,#324374,.T.); +#324898 = ORIENTED_EDGE('',*,*,#324405,.T.); +#324899 = ORIENTED_EDGE('',*,*,#324436,.T.); +#324900 = ORIENTED_EDGE('',*,*,#324467,.T.); +#324901 = ORIENTED_EDGE('',*,*,#324498,.T.); +#324902 = ORIENTED_EDGE('',*,*,#324529,.T.); +#324903 = ORIENTED_EDGE('',*,*,#324560,.T.); +#324904 = ORIENTED_EDGE('',*,*,#324591,.T.); +#324905 = ORIENTED_EDGE('',*,*,#324624,.T.); +#324906 = ORIENTED_EDGE('',*,*,#324655,.T.); +#324907 = ORIENTED_EDGE('',*,*,#324686,.T.); +#324908 = ORIENTED_EDGE('',*,*,#324717,.T.); +#324909 = ORIENTED_EDGE('',*,*,#324748,.T.); +#324910 = ORIENTED_EDGE('',*,*,#324781,.T.); +#324911 = FACE_BOUND('',#324912,.F.); +#324912 = EDGE_LOOP('',(#324913)); +#324913 = ORIENTED_EDGE('',*,*,#324812,.T.); +#324914 = PLANE('',#324915); +#324915 = AXIS2_PLACEMENT_3D('',#324916,#324917,#324918); +#324916 = CARTESIAN_POINT('',(0.,0.,1.545)); +#324917 = DIRECTION('',(0.,0.,1.)); +#324918 = DIRECTION('',(1.,0.,-0.)); +#324919 = MANIFOLD_SOLID_BREP('',#324920); +#324920 = CLOSED_SHELL('',(#324921,#324961,#324994,#325025,#325058, + #325089,#325120,#325151,#325184,#325206,#325239,#325259)); +#324921 = ADVANCED_FACE('',(#324922),#324956,.T.); +#324922 = FACE_BOUND('',#324923,.T.); +#324923 = EDGE_LOOP('',(#324924,#324934,#324942,#324950)); +#324924 = ORIENTED_EDGE('',*,*,#324925,.T.); +#324925 = EDGE_CURVE('',#324926,#324928,#324930,.T.); +#324926 = VERTEX_POINT('',#324927); +#324927 = CARTESIAN_POINT('',(145.681131,-70.85,1.51)); +#324928 = VERTEX_POINT('',#324929); +#324929 = CARTESIAN_POINT('',(145.681131,-70.85,1.545)); +#324930 = LINE('',#324931,#324932); +#324931 = CARTESIAN_POINT('',(145.681131,-70.85,1.51)); +#324932 = VECTOR('',#324933,1.); +#324933 = DIRECTION('',(0.,0.,1.)); +#324934 = ORIENTED_EDGE('',*,*,#324935,.T.); +#324935 = EDGE_CURVE('',#324928,#324936,#324938,.T.); +#324936 = VERTEX_POINT('',#324937); +#324937 = CARTESIAN_POINT('',(146.719509,-70.851921,1.545)); +#324938 = LINE('',#324939,#324940); +#324939 = CARTESIAN_POINT('',(145.681131,-70.85,1.545)); +#324940 = VECTOR('',#324941,1.); +#324941 = DIRECTION('',(0.999998288753,-1.84999750833E-03,0.)); +#324942 = ORIENTED_EDGE('',*,*,#324943,.F.); +#324943 = EDGE_CURVE('',#324944,#324936,#324946,.T.); +#324944 = VERTEX_POINT('',#324945); +#324945 = CARTESIAN_POINT('',(146.719509,-70.851921,1.51)); +#324946 = LINE('',#324947,#324948); +#324947 = CARTESIAN_POINT('',(146.719509,-70.851921,1.51)); +#324948 = VECTOR('',#324949,1.); +#324949 = DIRECTION('',(0.,0.,1.)); +#324950 = ORIENTED_EDGE('',*,*,#324951,.F.); +#324951 = EDGE_CURVE('',#324926,#324944,#324952,.T.); +#324952 = LINE('',#324953,#324954); +#324953 = CARTESIAN_POINT('',(145.681131,-70.85,1.51)); +#324954 = VECTOR('',#324955,1.); +#324955 = DIRECTION('',(0.999998288753,-1.84999750833E-03,0.)); +#324956 = PLANE('',#324957); +#324957 = AXIS2_PLACEMENT_3D('',#324958,#324959,#324960); +#324958 = CARTESIAN_POINT('',(145.681131,-70.85,1.51)); +#324959 = DIRECTION('',(1.84999750833E-03,0.999998288753,-0.)); +#324960 = DIRECTION('',(0.999998288753,-1.84999750833E-03,0.)); +#324961 = ADVANCED_FACE('',(#324962),#324989,.T.); +#324962 = FACE_BOUND('',#324963,.T.); +#324963 = EDGE_LOOP('',(#324964,#324965,#324974,#324982)); +#324964 = ORIENTED_EDGE('',*,*,#324943,.T.); +#324965 = ORIENTED_EDGE('',*,*,#324966,.T.); +#324966 = EDGE_CURVE('',#324936,#324967,#324969,.T.); +#324967 = VERTEX_POINT('',#324968); +#324968 = CARTESIAN_POINT('',(146.848079,-70.980491,1.545)); +#324969 = CIRCLE('',#324970,0.191468187874); +#324970 = AXIS2_PLACEMENT_3D('',#324971,#324972,#324973); +#324971 = CARTESIAN_POINT('',(146.66464085376,-71.03535914624,1.545)); +#324972 = DIRECTION('',(0.,0.,-1.)); +#324973 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#324974 = ORIENTED_EDGE('',*,*,#324975,.F.); +#324975 = EDGE_CURVE('',#324976,#324967,#324978,.T.); +#324976 = VERTEX_POINT('',#324977); +#324977 = CARTESIAN_POINT('',(146.848079,-70.980491,1.51)); +#324978 = LINE('',#324979,#324980); +#324979 = CARTESIAN_POINT('',(146.848079,-70.980491,1.51)); +#324980 = VECTOR('',#324981,1.); +#324981 = DIRECTION('',(0.,0.,1.)); +#324982 = ORIENTED_EDGE('',*,*,#324983,.F.); +#324983 = EDGE_CURVE('',#324944,#324976,#324984,.T.); +#324984 = CIRCLE('',#324985,0.191468187874); +#324985 = AXIS2_PLACEMENT_3D('',#324986,#324987,#324988); +#324986 = CARTESIAN_POINT('',(146.66464085376,-71.03535914624,1.51)); +#324987 = DIRECTION('',(0.,0.,-1.)); +#324988 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#324989 = CYLINDRICAL_SURFACE('',#324990,0.191468187874); +#324990 = AXIS2_PLACEMENT_3D('',#324991,#324992,#324993); +#324991 = CARTESIAN_POINT('',(146.66464085376,-71.03535914624,1.51)); +#324992 = DIRECTION('',(0.,0.,-1.)); +#324993 = DIRECTION('',(0.286565339387,0.958060700719,0.)); +#324994 = ADVANCED_FACE('',(#324995),#325020,.T.); +#324995 = FACE_BOUND('',#324996,.T.); +#324996 = EDGE_LOOP('',(#324997,#324998,#325006,#325014)); +#324997 = ORIENTED_EDGE('',*,*,#324975,.T.); +#324998 = ORIENTED_EDGE('',*,*,#324999,.T.); +#324999 = EDGE_CURVE('',#324967,#325000,#325002,.T.); +#325000 = VERTEX_POINT('',#325001); +#325001 = CARTESIAN_POINT('',(146.848079,-71.019509,1.545)); +#325002 = LINE('',#325003,#325004); +#325003 = CARTESIAN_POINT('',(146.848079,-70.980491,1.545)); +#325004 = VECTOR('',#325005,1.); +#325005 = DIRECTION('',(0.,-1.,0.)); +#325006 = ORIENTED_EDGE('',*,*,#325007,.F.); +#325007 = EDGE_CURVE('',#325008,#325000,#325010,.T.); +#325008 = VERTEX_POINT('',#325009); +#325009 = CARTESIAN_POINT('',(146.848079,-71.019509,1.51)); +#325010 = LINE('',#325011,#325012); +#325011 = CARTESIAN_POINT('',(146.848079,-71.019509,1.51)); +#325012 = VECTOR('',#325013,1.); +#325013 = DIRECTION('',(0.,0.,1.)); +#325014 = ORIENTED_EDGE('',*,*,#325015,.F.); +#325015 = EDGE_CURVE('',#324976,#325008,#325016,.T.); +#325016 = LINE('',#325017,#325018); +#325017 = CARTESIAN_POINT('',(146.848079,-70.980491,1.51)); +#325018 = VECTOR('',#325019,1.); +#325019 = DIRECTION('',(0.,-1.,0.)); +#325020 = PLANE('',#325021); +#325021 = AXIS2_PLACEMENT_3D('',#325022,#325023,#325024); +#325022 = CARTESIAN_POINT('',(146.848079,-70.980491,1.51)); +#325023 = DIRECTION('',(1.,0.,-0.)); +#325024 = DIRECTION('',(0.,-1.,0.)); +#325025 = ADVANCED_FACE('',(#325026),#325053,.T.); +#325026 = FACE_BOUND('',#325027,.T.); +#325027 = EDGE_LOOP('',(#325028,#325029,#325038,#325046)); +#325028 = ORIENTED_EDGE('',*,*,#325007,.T.); +#325029 = ORIENTED_EDGE('',*,*,#325030,.T.); +#325030 = EDGE_CURVE('',#325000,#325031,#325033,.T.); +#325031 = VERTEX_POINT('',#325032); +#325032 = CARTESIAN_POINT('',(146.694443,-71.083147,1.545)); +#325033 = CIRCLE('',#325034,9.999986478839E-02); +#325034 = AXIS2_PLACEMENT_3D('',#325035,#325036,#325037); +#325035 = CARTESIAN_POINT('',(146.7500005,-71.0000005199,1.545)); +#325036 = DIRECTION('',(-0.,0.,-1.)); +#325037 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#325038 = ORIENTED_EDGE('',*,*,#325039,.F.); +#325039 = EDGE_CURVE('',#325040,#325031,#325042,.T.); +#325040 = VERTEX_POINT('',#325041); +#325041 = CARTESIAN_POINT('',(146.694443,-71.083147,1.51)); +#325042 = LINE('',#325043,#325044); +#325043 = CARTESIAN_POINT('',(146.694443,-71.083147,1.51)); +#325044 = VECTOR('',#325045,1.); +#325045 = DIRECTION('',(0.,0.,1.)); +#325046 = ORIENTED_EDGE('',*,*,#325047,.F.); +#325047 = EDGE_CURVE('',#325008,#325040,#325048,.T.); +#325048 = CIRCLE('',#325049,9.999986478839E-02); +#325049 = AXIS2_PLACEMENT_3D('',#325050,#325051,#325052); +#325050 = CARTESIAN_POINT('',(146.7500005,-71.0000005199,1.51)); +#325051 = DIRECTION('',(-0.,0.,-1.)); +#325052 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#325053 = CYLINDRICAL_SURFACE('',#325054,9.999986478839E-02); +#325054 = AXIS2_PLACEMENT_3D('',#325055,#325056,#325057); +#325055 = CARTESIAN_POINT('',(146.7500005,-71.0000005199,1.51)); +#325056 = DIRECTION('',(-0.,0.,-1.)); +#325057 = DIRECTION('',(0.980786326137,-0.195085064683,-0.)); +#325058 = ADVANCED_FACE('',(#325059),#325084,.T.); +#325059 = FACE_BOUND('',#325060,.T.); +#325060 = EDGE_LOOP('',(#325061,#325062,#325070,#325078)); +#325061 = ORIENTED_EDGE('',*,*,#325039,.T.); +#325062 = ORIENTED_EDGE('',*,*,#325063,.T.); +#325063 = EDGE_CURVE('',#325031,#325064,#325066,.T.); +#325064 = VERTEX_POINT('',#325065); +#325065 = CARTESIAN_POINT('',(146.658579,-71.05,1.545)); +#325066 = LINE('',#325067,#325068); +#325067 = CARTESIAN_POINT('',(146.694443,-71.083147,1.545)); +#325068 = VECTOR('',#325069,1.); +#325069 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#325070 = ORIENTED_EDGE('',*,*,#325071,.F.); +#325071 = EDGE_CURVE('',#325072,#325064,#325074,.T.); +#325072 = VERTEX_POINT('',#325073); +#325073 = CARTESIAN_POINT('',(146.658579,-71.05,1.51)); +#325074 = LINE('',#325075,#325076); +#325075 = CARTESIAN_POINT('',(146.658579,-71.05,1.51)); +#325076 = VECTOR('',#325077,1.); +#325077 = DIRECTION('',(0.,0.,1.)); +#325078 = ORIENTED_EDGE('',*,*,#325079,.F.); +#325079 = EDGE_CURVE('',#325040,#325072,#325080,.T.); +#325080 = LINE('',#325081,#325082); +#325081 = CARTESIAN_POINT('',(146.694443,-71.083147,1.51)); +#325082 = VECTOR('',#325083,1.); +#325083 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#325084 = PLANE('',#325085); +#325085 = AXIS2_PLACEMENT_3D('',#325086,#325087,#325088); +#325086 = CARTESIAN_POINT('',(146.694443,-71.083147,1.51)); +#325087 = DIRECTION('',(-0.67874177438,-0.734377017418,0.)); +#325088 = DIRECTION('',(-0.734377017418,0.67874177438,0.)); +#325089 = ADVANCED_FACE('',(#325090),#325115,.T.); +#325090 = FACE_BOUND('',#325091,.T.); +#325091 = EDGE_LOOP('',(#325092,#325093,#325101,#325109)); +#325092 = ORIENTED_EDGE('',*,*,#325071,.T.); +#325093 = ORIENTED_EDGE('',*,*,#325094,.T.); +#325094 = EDGE_CURVE('',#325064,#325095,#325097,.T.); +#325095 = VERTEX_POINT('',#325096); +#325096 = CARTESIAN_POINT('',(145.681131,-71.05,1.545)); +#325097 = LINE('',#325098,#325099); +#325098 = CARTESIAN_POINT('',(146.658579,-71.05,1.545)); +#325099 = VECTOR('',#325100,1.); +#325100 = DIRECTION('',(-1.,0.,0.)); +#325101 = ORIENTED_EDGE('',*,*,#325102,.F.); +#325102 = EDGE_CURVE('',#325103,#325095,#325105,.T.); +#325103 = VERTEX_POINT('',#325104); +#325104 = CARTESIAN_POINT('',(145.681131,-71.05,1.51)); +#325105 = LINE('',#325106,#325107); +#325106 = CARTESIAN_POINT('',(145.681131,-71.05,1.51)); +#325107 = VECTOR('',#325108,1.); +#325108 = DIRECTION('',(0.,0.,1.)); +#325109 = ORIENTED_EDGE('',*,*,#325110,.F.); +#325110 = EDGE_CURVE('',#325072,#325103,#325111,.T.); +#325111 = LINE('',#325112,#325113); +#325112 = CARTESIAN_POINT('',(146.658579,-71.05,1.51)); +#325113 = VECTOR('',#325114,1.); +#325114 = DIRECTION('',(-1.,0.,0.)); +#325115 = PLANE('',#325116); +#325116 = AXIS2_PLACEMENT_3D('',#325117,#325118,#325119); +#325117 = CARTESIAN_POINT('',(146.658579,-71.05,1.51)); +#325118 = DIRECTION('',(0.,-1.,0.)); +#325119 = DIRECTION('',(-1.,0.,0.)); +#325120 = ADVANCED_FACE('',(#325121),#325146,.T.); +#325121 = FACE_BOUND('',#325122,.T.); +#325122 = EDGE_LOOP('',(#325123,#325124,#325132,#325140)); +#325123 = ORIENTED_EDGE('',*,*,#325102,.T.); +#325124 = ORIENTED_EDGE('',*,*,#325125,.T.); +#325125 = EDGE_CURVE('',#325095,#325126,#325128,.T.); +#325126 = VERTEX_POINT('',#325127); +#325127 = CARTESIAN_POINT('',(145.677164,-71.064805,1.545)); +#325128 = LINE('',#325129,#325130); +#325129 = CARTESIAN_POINT('',(145.681131,-71.05,1.545)); +#325130 = VECTOR('',#325131,1.); +#325131 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#325132 = ORIENTED_EDGE('',*,*,#325133,.F.); +#325133 = EDGE_CURVE('',#325134,#325126,#325136,.T.); +#325134 = VERTEX_POINT('',#325135); +#325135 = CARTESIAN_POINT('',(145.677164,-71.064805,1.51)); +#325136 = LINE('',#325137,#325138); +#325137 = CARTESIAN_POINT('',(145.677164,-71.064805,1.51)); +#325138 = VECTOR('',#325139,1.); +#325139 = DIRECTION('',(0.,0.,1.)); +#325140 = ORIENTED_EDGE('',*,*,#325141,.F.); +#325141 = EDGE_CURVE('',#325103,#325134,#325142,.T.); +#325142 = LINE('',#325143,#325144); +#325143 = CARTESIAN_POINT('',(145.681131,-71.05,1.51)); +#325144 = VECTOR('',#325145,1.); +#325145 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#325146 = PLANE('',#325147); +#325147 = AXIS2_PLACEMENT_3D('',#325148,#325149,#325150); +#325148 = CARTESIAN_POINT('',(145.681131,-71.05,1.51)); +#325149 = DIRECTION('',(0.965925627198,-0.258819788118,0.)); +#325150 = DIRECTION('',(-0.258819788118,-0.965925627198,0.)); +#325151 = ADVANCED_FACE('',(#325152),#325179,.T.); +#325152 = FACE_BOUND('',#325153,.T.); +#325153 = EDGE_LOOP('',(#325154,#325155,#325164,#325172)); +#325154 = ORIENTED_EDGE('',*,*,#325133,.T.); +#325155 = ORIENTED_EDGE('',*,*,#325156,.T.); +#325156 = EDGE_CURVE('',#325126,#325157,#325159,.T.); +#325157 = VERTEX_POINT('',#325158); +#325158 = CARTESIAN_POINT('',(145.677164,-70.835195,1.545)); +#325159 = CIRCLE('',#325160,0.299999888633); +#325160 = AXIS2_PLACEMENT_3D('',#325161,#325162,#325163); +#325161 = CARTESIAN_POINT('',(145.40000024848,-70.95,1.545)); +#325162 = DIRECTION('',(-0.,0.,-1.)); +#325163 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#325164 = ORIENTED_EDGE('',*,*,#325165,.F.); +#325165 = EDGE_CURVE('',#325166,#325157,#325168,.T.); +#325166 = VERTEX_POINT('',#325167); +#325167 = CARTESIAN_POINT('',(145.677164,-70.835195,1.51)); +#325168 = LINE('',#325169,#325170); +#325169 = CARTESIAN_POINT('',(145.677164,-70.835195,1.51)); +#325170 = VECTOR('',#325171,1.); +#325171 = DIRECTION('',(0.,0.,1.)); +#325172 = ORIENTED_EDGE('',*,*,#325173,.F.); +#325173 = EDGE_CURVE('',#325134,#325166,#325174,.T.); +#325174 = CIRCLE('',#325175,0.299999888633); +#325175 = AXIS2_PLACEMENT_3D('',#325176,#325177,#325178); +#325176 = CARTESIAN_POINT('',(145.40000024848,-70.95,1.51)); +#325177 = DIRECTION('',(-0.,0.,-1.)); +#325178 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#325179 = CYLINDRICAL_SURFACE('',#325180,0.299999888633); +#325180 = AXIS2_PLACEMENT_3D('',#325181,#325182,#325183); +#325181 = CARTESIAN_POINT('',(145.40000024848,-70.95,1.51)); +#325182 = DIRECTION('',(-0.,0.,-1.)); +#325183 = DIRECTION('',(0.923879514688,-0.382683475394,-0.)); +#325184 = ADVANCED_FACE('',(#325185),#325201,.T.); +#325185 = FACE_BOUND('',#325186,.T.); +#325186 = EDGE_LOOP('',(#325187,#325188,#325194,#325195)); +#325187 = ORIENTED_EDGE('',*,*,#325165,.T.); +#325188 = ORIENTED_EDGE('',*,*,#325189,.T.); +#325189 = EDGE_CURVE('',#325157,#324928,#325190,.T.); +#325190 = LINE('',#325191,#325192); +#325191 = CARTESIAN_POINT('',(145.677164,-70.835195,1.545)); +#325192 = VECTOR('',#325193,1.); +#325193 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#325194 = ORIENTED_EDGE('',*,*,#324925,.F.); +#325195 = ORIENTED_EDGE('',*,*,#325196,.F.); +#325196 = EDGE_CURVE('',#325166,#324926,#325197,.T.); +#325197 = LINE('',#325198,#325199); +#325198 = CARTESIAN_POINT('',(145.677164,-70.835195,1.51)); +#325199 = VECTOR('',#325200,1.); +#325200 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#325201 = PLANE('',#325202); +#325202 = AXIS2_PLACEMENT_3D('',#325203,#325204,#325205); +#325203 = CARTESIAN_POINT('',(145.677164,-70.835195,1.51)); +#325204 = DIRECTION('',(0.965925627198,0.258819788118,-0.)); +#325205 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#325206 = ADVANCED_FACE('',(#325207),#325234,.F.); +#325207 = FACE_BOUND('',#325208,.T.); +#325208 = EDGE_LOOP('',(#325209,#325219,#325226,#325227)); +#325209 = ORIENTED_EDGE('',*,*,#325210,.T.); +#325210 = EDGE_CURVE('',#325211,#325213,#325215,.T.); +#325211 = VERTEX_POINT('',#325212); +#325212 = CARTESIAN_POINT('',(145.537255,-70.95,1.51)); +#325213 = VERTEX_POINT('',#325214); +#325214 = CARTESIAN_POINT('',(145.537255,-70.95,1.545)); +#325215 = LINE('',#325216,#325217); +#325216 = CARTESIAN_POINT('',(145.537255,-70.95,1.51)); +#325217 = VECTOR('',#325218,1.); +#325218 = DIRECTION('',(0.,0.,1.)); +#325219 = ORIENTED_EDGE('',*,*,#325220,.T.); +#325220 = EDGE_CURVE('',#325213,#325213,#325221,.T.); +#325221 = CIRCLE('',#325222,0.137255); +#325222 = AXIS2_PLACEMENT_3D('',#325223,#325224,#325225); +#325223 = CARTESIAN_POINT('',(145.4,-70.95,1.545)); +#325224 = DIRECTION('',(0.,0.,1.)); +#325225 = DIRECTION('',(1.,0.,-0.)); +#325226 = ORIENTED_EDGE('',*,*,#325210,.F.); +#325227 = ORIENTED_EDGE('',*,*,#325228,.F.); +#325228 = EDGE_CURVE('',#325211,#325211,#325229,.T.); +#325229 = CIRCLE('',#325230,0.137255); +#325230 = AXIS2_PLACEMENT_3D('',#325231,#325232,#325233); +#325231 = CARTESIAN_POINT('',(145.4,-70.95,1.51)); +#325232 = DIRECTION('',(0.,0.,1.)); +#325233 = DIRECTION('',(1.,0.,-0.)); +#325234 = CYLINDRICAL_SURFACE('',#325235,0.137255); +#325235 = AXIS2_PLACEMENT_3D('',#325236,#325237,#325238); +#325236 = CARTESIAN_POINT('',(145.4,-70.95,1.51)); +#325237 = DIRECTION('',(-0.,-0.,-1.)); +#325238 = DIRECTION('',(1.,0.,-0.)); +#325239 = ADVANCED_FACE('',(#325240,#325251),#325254,.F.); +#325240 = FACE_BOUND('',#325241,.T.); +#325241 = EDGE_LOOP('',(#325242,#325243,#325244,#325245,#325246,#325247, + #325248,#325249,#325250)); +#325242 = ORIENTED_EDGE('',*,*,#324951,.T.); +#325243 = ORIENTED_EDGE('',*,*,#324983,.T.); +#325244 = ORIENTED_EDGE('',*,*,#325015,.T.); +#325245 = ORIENTED_EDGE('',*,*,#325047,.T.); +#325246 = ORIENTED_EDGE('',*,*,#325079,.T.); +#325247 = ORIENTED_EDGE('',*,*,#325110,.T.); +#325248 = ORIENTED_EDGE('',*,*,#325141,.T.); +#325249 = ORIENTED_EDGE('',*,*,#325173,.T.); +#325250 = ORIENTED_EDGE('',*,*,#325196,.T.); +#325251 = FACE_BOUND('',#325252,.T.); +#325252 = EDGE_LOOP('',(#325253)); +#325253 = ORIENTED_EDGE('',*,*,#325228,.T.); +#325254 = PLANE('',#325255); +#325255 = AXIS2_PLACEMENT_3D('',#325256,#325257,#325258); +#325256 = CARTESIAN_POINT('',(0.,0.,1.51)); +#325257 = DIRECTION('',(0.,0.,1.)); +#325258 = DIRECTION('',(1.,0.,-0.)); +#325259 = ADVANCED_FACE('',(#325260,#325271),#325274,.T.); +#325260 = FACE_BOUND('',#325261,.F.); +#325261 = EDGE_LOOP('',(#325262,#325263,#325264,#325265,#325266,#325267, + #325268,#325269,#325270)); +#325262 = ORIENTED_EDGE('',*,*,#324935,.T.); +#325263 = ORIENTED_EDGE('',*,*,#324966,.T.); +#325264 = ORIENTED_EDGE('',*,*,#324999,.T.); +#325265 = ORIENTED_EDGE('',*,*,#325030,.T.); +#325266 = ORIENTED_EDGE('',*,*,#325063,.T.); +#325267 = ORIENTED_EDGE('',*,*,#325094,.T.); +#325268 = ORIENTED_EDGE('',*,*,#325125,.T.); +#325269 = ORIENTED_EDGE('',*,*,#325156,.T.); +#325270 = ORIENTED_EDGE('',*,*,#325189,.T.); +#325271 = FACE_BOUND('',#325272,.F.); +#325272 = EDGE_LOOP('',(#325273)); +#325273 = ORIENTED_EDGE('',*,*,#325220,.T.); +#325274 = PLANE('',#325275); +#325275 = AXIS2_PLACEMENT_3D('',#325276,#325277,#325278); +#325276 = CARTESIAN_POINT('',(0.,0.,1.545)); +#325277 = DIRECTION('',(0.,0.,1.)); +#325278 = DIRECTION('',(1.,0.,-0.)); +#325279 = MANIFOLD_SOLID_BREP('',#325280); +#325280 = CLOSED_SHELL('',(#325281,#325321,#325352,#325383,#325414, + #325445,#325476,#325507,#325540,#325571,#325602,#325633,#325664, + #325695,#325726,#325757,#325788,#325819,#325850,#325881,#325912, + #325945,#325976,#326007,#326038,#326069,#326100,#326131,#326162, + #326184,#326217,#326250,#326293)); +#325281 = ADVANCED_FACE('',(#325282),#325316,.F.); +#325282 = FACE_BOUND('',#325283,.F.); +#325283 = EDGE_LOOP('',(#325284,#325294,#325302,#325310)); +#325284 = ORIENTED_EDGE('',*,*,#325285,.T.); +#325285 = EDGE_CURVE('',#325286,#325288,#325290,.T.); +#325286 = VERTEX_POINT('',#325287); +#325287 = CARTESIAN_POINT('',(133.378757,-68.716853,0.)); +#325288 = VERTEX_POINT('',#325289); +#325289 = CARTESIAN_POINT('',(133.378757,-68.716853,-3.5E-02)); +#325290 = LINE('',#325291,#325292); +#325291 = CARTESIAN_POINT('',(133.378757,-68.716853,0.)); +#325292 = VECTOR('',#325293,1.); +#325293 = DIRECTION('',(0.,0.,-1.)); +#325294 = ORIENTED_EDGE('',*,*,#325295,.T.); +#325295 = EDGE_CURVE('',#325288,#325296,#325298,.T.); +#325296 = VERTEX_POINT('',#325297); +#325297 = CARTESIAN_POINT('',(133.414806,-68.701921,-3.5E-02)); +#325298 = LINE('',#325299,#325300); +#325299 = CARTESIAN_POINT('',(133.378757,-68.716853,-3.5E-02)); +#325300 = VECTOR('',#325301,1.); +#325301 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#325302 = ORIENTED_EDGE('',*,*,#325303,.F.); +#325303 = EDGE_CURVE('',#325304,#325296,#325306,.T.); +#325304 = VERTEX_POINT('',#325305); +#325305 = CARTESIAN_POINT('',(133.414806,-68.701921,0.)); +#325306 = LINE('',#325307,#325308); +#325307 = CARTESIAN_POINT('',(133.414806,-68.701921,0.)); +#325308 = VECTOR('',#325309,1.); +#325309 = DIRECTION('',(0.,0.,-1.)); +#325310 = ORIENTED_EDGE('',*,*,#325311,.F.); +#325311 = EDGE_CURVE('',#325286,#325304,#325312,.T.); +#325312 = LINE('',#325313,#325314); +#325313 = CARTESIAN_POINT('',(133.378757,-68.716853,0.)); +#325314 = VECTOR('',#325315,1.); +#325315 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#325316 = PLANE('',#325317); +#325317 = AXIS2_PLACEMENT_3D('',#325318,#325319,#325320); +#325318 = CARTESIAN_POINT('',(133.378757,-68.716853,0.)); +#325319 = DIRECTION('',(0.382683766838,-0.923879393968,0.)); +#325320 = DIRECTION('',(0.923879393968,0.382683766838,0.)); +#325321 = ADVANCED_FACE('',(#325322),#325347,.F.); +#325322 = FACE_BOUND('',#325323,.F.); +#325323 = EDGE_LOOP('',(#325324,#325325,#325333,#325341)); +#325324 = ORIENTED_EDGE('',*,*,#325303,.T.); +#325325 = ORIENTED_EDGE('',*,*,#325326,.T.); +#325326 = EDGE_CURVE('',#325296,#325327,#325329,.T.); +#325327 = VERTEX_POINT('',#325328); +#325328 = CARTESIAN_POINT('',(144.368038,-68.701921,-3.5E-02)); +#325329 = LINE('',#325330,#325331); +#325330 = CARTESIAN_POINT('',(133.414806,-68.701921,-3.5E-02)); +#325331 = VECTOR('',#325332,1.); +#325332 = DIRECTION('',(1.,0.,0.)); +#325333 = ORIENTED_EDGE('',*,*,#325334,.F.); +#325334 = EDGE_CURVE('',#325335,#325327,#325337,.T.); +#325335 = VERTEX_POINT('',#325336); +#325336 = CARTESIAN_POINT('',(144.368038,-68.701921,0.)); +#325337 = LINE('',#325338,#325339); +#325338 = CARTESIAN_POINT('',(144.368038,-68.701921,0.)); +#325339 = VECTOR('',#325340,1.); +#325340 = DIRECTION('',(0.,0.,-1.)); +#325341 = ORIENTED_EDGE('',*,*,#325342,.F.); +#325342 = EDGE_CURVE('',#325304,#325335,#325343,.T.); +#325343 = LINE('',#325344,#325345); +#325344 = CARTESIAN_POINT('',(133.414806,-68.701921,0.)); +#325345 = VECTOR('',#325346,1.); +#325346 = DIRECTION('',(1.,0.,0.)); +#325347 = PLANE('',#325348); +#325348 = AXIS2_PLACEMENT_3D('',#325349,#325350,#325351); +#325349 = CARTESIAN_POINT('',(133.414806,-68.701921,0.)); +#325350 = DIRECTION('',(0.,-1.,0.)); +#325351 = DIRECTION('',(1.,0.,0.)); +#325352 = ADVANCED_FACE('',(#325353),#325378,.F.); +#325353 = FACE_BOUND('',#325354,.F.); +#325354 = EDGE_LOOP('',(#325355,#325356,#325364,#325372)); +#325355 = ORIENTED_EDGE('',*,*,#325334,.T.); +#325356 = ORIENTED_EDGE('',*,*,#325357,.T.); +#325357 = EDGE_CURVE('',#325327,#325358,#325360,.T.); +#325358 = VERTEX_POINT('',#325359); +#325359 = CARTESIAN_POINT('',(144.404086,-68.716853,-3.5E-02)); +#325360 = LINE('',#325361,#325362); +#325361 = CARTESIAN_POINT('',(144.368038,-68.701921,-3.5E-02)); +#325362 = VECTOR('',#325363,1.); +#325363 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#325364 = ORIENTED_EDGE('',*,*,#325365,.F.); +#325365 = EDGE_CURVE('',#325366,#325358,#325368,.T.); +#325366 = VERTEX_POINT('',#325367); +#325367 = CARTESIAN_POINT('',(144.404086,-68.716853,0.)); +#325368 = LINE('',#325369,#325370); +#325369 = CARTESIAN_POINT('',(144.404086,-68.716853,0.)); +#325370 = VECTOR('',#325371,1.); +#325371 = DIRECTION('',(0.,0.,-1.)); +#325372 = ORIENTED_EDGE('',*,*,#325373,.F.); +#325373 = EDGE_CURVE('',#325335,#325366,#325374,.T.); +#325374 = LINE('',#325375,#325376); +#325375 = CARTESIAN_POINT('',(144.368038,-68.701921,0.)); +#325376 = VECTOR('',#325377,1.); +#325377 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#325378 = PLANE('',#325379); +#325379 = AXIS2_PLACEMENT_3D('',#325380,#325381,#325382); +#325380 = CARTESIAN_POINT('',(144.368038,-68.701921,0.)); +#325381 = DIRECTION('',(-0.38269282806,-0.923875640631,-0.)); +#325382 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#325383 = ADVANCED_FACE('',(#325384),#325409,.F.); +#325384 = FACE_BOUND('',#325385,.F.); +#325385 = EDGE_LOOP('',(#325386,#325387,#325395,#325403)); +#325386 = ORIENTED_EDGE('',*,*,#325365,.T.); +#325387 = ORIENTED_EDGE('',*,*,#325388,.T.); +#325388 = EDGE_CURVE('',#325358,#325389,#325391,.T.); +#325389 = VERTEX_POINT('',#325390); +#325390 = CARTESIAN_POINT('',(145.483148,-69.795914,-3.5E-02)); +#325391 = LINE('',#325392,#325393); +#325392 = CARTESIAN_POINT('',(144.404086,-68.716853,-3.5E-02)); +#325393 = VECTOR('',#325394,1.); +#325394 = DIRECTION('',(0.707107108835,-0.707106453538,0.)); +#325395 = ORIENTED_EDGE('',*,*,#325396,.F.); +#325396 = EDGE_CURVE('',#325397,#325389,#325399,.T.); +#325397 = VERTEX_POINT('',#325398); +#325398 = CARTESIAN_POINT('',(145.483148,-69.795914,0.)); +#325399 = LINE('',#325400,#325401); +#325400 = CARTESIAN_POINT('',(145.483148,-69.795914,0.)); +#325401 = VECTOR('',#325402,1.); +#325402 = DIRECTION('',(0.,0.,-1.)); +#325403 = ORIENTED_EDGE('',*,*,#325404,.F.); +#325404 = EDGE_CURVE('',#325366,#325397,#325405,.T.); +#325405 = LINE('',#325406,#325407); +#325406 = CARTESIAN_POINT('',(144.404086,-68.716853,0.)); +#325407 = VECTOR('',#325408,1.); +#325408 = DIRECTION('',(0.707107108835,-0.707106453538,0.)); +#325409 = PLANE('',#325410); +#325410 = AXIS2_PLACEMENT_3D('',#325411,#325412,#325413); +#325411 = CARTESIAN_POINT('',(144.404086,-68.716853,0.)); +#325412 = DIRECTION('',(-0.707106453538,-0.707107108835,-0.)); +#325413 = DIRECTION('',(0.707107108835,-0.707106453538,0.)); +#325414 = ADVANCED_FACE('',(#325415),#325440,.F.); +#325415 = FACE_BOUND('',#325416,.F.); +#325416 = EDGE_LOOP('',(#325417,#325418,#325426,#325434)); +#325417 = ORIENTED_EDGE('',*,*,#325396,.T.); +#325418 = ORIENTED_EDGE('',*,*,#325419,.T.); +#325419 = EDGE_CURVE('',#325389,#325420,#325422,.T.); +#325420 = VERTEX_POINT('',#325421); +#325421 = CARTESIAN_POINT('',(145.498079,-69.831962,-3.5E-02)); +#325422 = LINE('',#325423,#325424); +#325423 = CARTESIAN_POINT('',(145.483148,-69.795914,-3.5E-02)); +#325424 = VECTOR('',#325425,1.); +#325425 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#325426 = ORIENTED_EDGE('',*,*,#325427,.F.); +#325427 = EDGE_CURVE('',#325428,#325420,#325430,.T.); +#325428 = VERTEX_POINT('',#325429); +#325429 = CARTESIAN_POINT('',(145.498079,-69.831962,0.)); +#325430 = LINE('',#325431,#325432); +#325431 = CARTESIAN_POINT('',(145.498079,-69.831962,0.)); +#325432 = VECTOR('',#325433,1.); +#325433 = DIRECTION('',(0.,0.,-1.)); +#325434 = ORIENTED_EDGE('',*,*,#325435,.F.); +#325435 = EDGE_CURVE('',#325397,#325428,#325436,.T.); +#325436 = LINE('',#325437,#325438); +#325437 = CARTESIAN_POINT('',(145.483148,-69.795914,0.)); +#325438 = VECTOR('',#325439,1.); +#325439 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#325440 = PLANE('',#325441); +#325441 = AXIS2_PLACEMENT_3D('',#325442,#325443,#325444); +#325442 = CARTESIAN_POINT('',(145.483148,-69.795914,0.)); +#325443 = DIRECTION('',(-0.923884701879,-0.382670952168,-0.)); +#325444 = DIRECTION('',(0.382670952168,-0.923884701879,0.)); +#325445 = ADVANCED_FACE('',(#325446),#325471,.F.); +#325446 = FACE_BOUND('',#325447,.F.); +#325447 = EDGE_LOOP('',(#325448,#325449,#325457,#325465)); +#325448 = ORIENTED_EDGE('',*,*,#325427,.T.); +#325449 = ORIENTED_EDGE('',*,*,#325450,.T.); +#325450 = EDGE_CURVE('',#325420,#325451,#325453,.T.); +#325451 = VERTEX_POINT('',#325452); +#325452 = CARTESIAN_POINT('',(145.5,-70.668869,-3.5E-02)); +#325453 = LINE('',#325454,#325455); +#325454 = CARTESIAN_POINT('',(145.498079,-69.831962,-3.5E-02)); +#325455 = VECTOR('',#325456,1.); +#325456 = DIRECTION('',(2.295350546095E-03,-0.999997365679,0.)); +#325457 = ORIENTED_EDGE('',*,*,#325458,.F.); +#325458 = EDGE_CURVE('',#325459,#325451,#325461,.T.); +#325459 = VERTEX_POINT('',#325460); +#325460 = CARTESIAN_POINT('',(145.5,-70.668869,0.)); +#325461 = LINE('',#325462,#325463); +#325462 = CARTESIAN_POINT('',(145.5,-70.668869,0.)); +#325463 = VECTOR('',#325464,1.); +#325464 = DIRECTION('',(0.,0.,-1.)); +#325465 = ORIENTED_EDGE('',*,*,#325466,.F.); +#325466 = EDGE_CURVE('',#325428,#325459,#325467,.T.); +#325467 = LINE('',#325468,#325469); +#325468 = CARTESIAN_POINT('',(145.498079,-69.831962,0.)); +#325469 = VECTOR('',#325470,1.); +#325470 = DIRECTION('',(2.295350546095E-03,-0.999997365679,0.)); +#325471 = PLANE('',#325472); +#325472 = AXIS2_PLACEMENT_3D('',#325473,#325474,#325475); +#325473 = CARTESIAN_POINT('',(145.498079,-69.831962,0.)); +#325474 = DIRECTION('',(-0.999997365679,-2.295350546095E-03,-0.)); +#325475 = DIRECTION('',(2.295350546095E-03,-0.999997365679,0.)); +#325476 = ADVANCED_FACE('',(#325477),#325502,.F.); +#325477 = FACE_BOUND('',#325478,.F.); +#325478 = EDGE_LOOP('',(#325479,#325480,#325488,#325496)); +#325479 = ORIENTED_EDGE('',*,*,#325458,.T.); +#325480 = ORIENTED_EDGE('',*,*,#325481,.T.); +#325481 = EDGE_CURVE('',#325451,#325482,#325484,.T.); +#325482 = VERTEX_POINT('',#325483); +#325483 = CARTESIAN_POINT('',(145.514805,-70.672836,-3.5E-02)); +#325484 = LINE('',#325485,#325486); +#325485 = CARTESIAN_POINT('',(145.5,-70.668869,-3.5E-02)); +#325486 = VECTOR('',#325487,1.); +#325487 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#325488 = ORIENTED_EDGE('',*,*,#325489,.F.); +#325489 = EDGE_CURVE('',#325490,#325482,#325492,.T.); +#325490 = VERTEX_POINT('',#325491); +#325491 = CARTESIAN_POINT('',(145.514805,-70.672836,0.)); +#325492 = LINE('',#325493,#325494); +#325493 = CARTESIAN_POINT('',(145.514805,-70.672836,0.)); +#325494 = VECTOR('',#325495,1.); +#325495 = DIRECTION('',(0.,0.,-1.)); +#325496 = ORIENTED_EDGE('',*,*,#325497,.F.); +#325497 = EDGE_CURVE('',#325459,#325490,#325498,.T.); +#325498 = LINE('',#325499,#325500); +#325499 = CARTESIAN_POINT('',(145.5,-70.668869,0.)); +#325500 = VECTOR('',#325501,1.); +#325501 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#325502 = PLANE('',#325503); +#325503 = AXIS2_PLACEMENT_3D('',#325504,#325505,#325506); +#325504 = CARTESIAN_POINT('',(145.5,-70.668869,0.)); +#325505 = DIRECTION('',(-0.258819788119,-0.965925627198,-0.)); +#325506 = DIRECTION('',(0.965925627198,-0.258819788119,0.)); +#325507 = ADVANCED_FACE('',(#325508),#325535,.T.); +#325508 = FACE_BOUND('',#325509,.F.); +#325509 = EDGE_LOOP('',(#325510,#325511,#325520,#325528)); +#325510 = ORIENTED_EDGE('',*,*,#325489,.T.); +#325511 = ORIENTED_EDGE('',*,*,#325512,.T.); +#325512 = EDGE_CURVE('',#325482,#325513,#325515,.T.); +#325513 = VERTEX_POINT('',#325514); +#325514 = CARTESIAN_POINT('',(145.285195,-70.672836,-3.5E-02)); +#325515 = CIRCLE('',#325516,0.299999850918); +#325516 = AXIS2_PLACEMENT_3D('',#325517,#325518,#325519); +#325517 = CARTESIAN_POINT('',(145.4,-70.94999971069,-3.5E-02)); +#325518 = DIRECTION('',(0.,0.,-1.)); +#325519 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#325520 = ORIENTED_EDGE('',*,*,#325521,.F.); +#325521 = EDGE_CURVE('',#325522,#325513,#325524,.T.); +#325522 = VERTEX_POINT('',#325523); +#325523 = CARTESIAN_POINT('',(145.285195,-70.672836,0.)); +#325524 = LINE('',#325525,#325526); +#325525 = CARTESIAN_POINT('',(145.285195,-70.672836,0.)); +#325526 = VECTOR('',#325527,1.); +#325527 = DIRECTION('',(0.,0.,-1.)); +#325528 = ORIENTED_EDGE('',*,*,#325529,.F.); +#325529 = EDGE_CURVE('',#325490,#325522,#325530,.T.); +#325530 = CIRCLE('',#325531,0.299999850918); +#325531 = AXIS2_PLACEMENT_3D('',#325532,#325533,#325534); +#325532 = CARTESIAN_POINT('',(145.4,-70.94999971069,0.)); +#325533 = DIRECTION('',(0.,0.,-1.)); +#325534 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#325535 = CYLINDRICAL_SURFACE('',#325536,0.299999850918); +#325536 = AXIS2_PLACEMENT_3D('',#325537,#325538,#325539); +#325537 = CARTESIAN_POINT('',(145.4,-70.94999971069,0.)); +#325538 = DIRECTION('',(-0.,-0.,1.)); +#325539 = DIRECTION('',(0.382683523504,0.92387949476,0.)); +#325540 = ADVANCED_FACE('',(#325541),#325566,.F.); +#325541 = FACE_BOUND('',#325542,.F.); +#325542 = EDGE_LOOP('',(#325543,#325544,#325552,#325560)); +#325543 = ORIENTED_EDGE('',*,*,#325521,.T.); +#325544 = ORIENTED_EDGE('',*,*,#325545,.T.); +#325545 = EDGE_CURVE('',#325513,#325546,#325548,.T.); +#325546 = VERTEX_POINT('',#325547); +#325547 = CARTESIAN_POINT('',(145.3,-70.668869,-3.5E-02)); +#325548 = LINE('',#325549,#325550); +#325549 = CARTESIAN_POINT('',(145.285195,-70.672836,-3.5E-02)); +#325550 = VECTOR('',#325551,1.); +#325551 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#325552 = ORIENTED_EDGE('',*,*,#325553,.F.); +#325553 = EDGE_CURVE('',#325554,#325546,#325556,.T.); +#325554 = VERTEX_POINT('',#325555); +#325555 = CARTESIAN_POINT('',(145.3,-70.668869,0.)); +#325556 = LINE('',#325557,#325558); +#325557 = CARTESIAN_POINT('',(145.3,-70.668869,0.)); +#325558 = VECTOR('',#325559,1.); +#325559 = DIRECTION('',(0.,0.,-1.)); +#325560 = ORIENTED_EDGE('',*,*,#325561,.F.); +#325561 = EDGE_CURVE('',#325522,#325554,#325562,.T.); +#325562 = LINE('',#325563,#325564); +#325563 = CARTESIAN_POINT('',(145.285195,-70.672836,0.)); +#325564 = VECTOR('',#325565,1.); +#325565 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#325566 = PLANE('',#325567); +#325567 = AXIS2_PLACEMENT_3D('',#325568,#325569,#325570); +#325568 = CARTESIAN_POINT('',(145.285195,-70.672836,0.)); +#325569 = DIRECTION('',(0.258819788118,-0.965925627198,0.)); +#325570 = DIRECTION('',(0.965925627198,0.258819788118,0.)); +#325571 = ADVANCED_FACE('',(#325572),#325597,.F.); +#325572 = FACE_BOUND('',#325573,.F.); +#325573 = EDGE_LOOP('',(#325574,#325575,#325583,#325591)); +#325574 = ORIENTED_EDGE('',*,*,#325553,.T.); +#325575 = ORIENTED_EDGE('',*,*,#325576,.T.); +#325576 = EDGE_CURVE('',#325546,#325577,#325579,.T.); +#325577 = VERTEX_POINT('',#325578); +#325578 = CARTESIAN_POINT('',(145.3,-69.892892,-3.5E-02)); +#325579 = LINE('',#325580,#325581); +#325580 = CARTESIAN_POINT('',(145.3,-70.668869,-3.5E-02)); +#325581 = VECTOR('',#325582,1.); +#325582 = DIRECTION('',(0.,1.,0.)); +#325583 = ORIENTED_EDGE('',*,*,#325584,.F.); +#325584 = EDGE_CURVE('',#325585,#325577,#325587,.T.); +#325585 = VERTEX_POINT('',#325586); +#325586 = CARTESIAN_POINT('',(145.3,-69.892892,0.)); +#325587 = LINE('',#325588,#325589); +#325588 = CARTESIAN_POINT('',(145.3,-69.892892,0.)); +#325589 = VECTOR('',#325590,1.); +#325590 = DIRECTION('',(0.,0.,-1.)); +#325591 = ORIENTED_EDGE('',*,*,#325592,.F.); +#325592 = EDGE_CURVE('',#325554,#325585,#325593,.T.); +#325593 = LINE('',#325594,#325595); +#325594 = CARTESIAN_POINT('',(145.3,-70.668869,0.)); +#325595 = VECTOR('',#325596,1.); +#325596 = DIRECTION('',(0.,1.,0.)); +#325597 = PLANE('',#325598); +#325598 = AXIS2_PLACEMENT_3D('',#325599,#325600,#325601); +#325599 = CARTESIAN_POINT('',(145.3,-70.668869,0.)); +#325600 = DIRECTION('',(1.,-0.,0.)); +#325601 = DIRECTION('',(0.,1.,0.)); +#325602 = ADVANCED_FACE('',(#325603),#325628,.F.); +#325603 = FACE_BOUND('',#325604,.F.); +#325604 = EDGE_LOOP('',(#325605,#325606,#325614,#325622)); +#325605 = ORIENTED_EDGE('',*,*,#325584,.T.); +#325606 = ORIENTED_EDGE('',*,*,#325607,.T.); +#325607 = EDGE_CURVE('',#325577,#325608,#325610,.T.); +#325608 = VERTEX_POINT('',#325609); +#325609 = CARTESIAN_POINT('',(144.307107,-68.9,-3.5E-02)); +#325610 = LINE('',#325611,#325612); +#325611 = CARTESIAN_POINT('',(145.3,-69.892892,-3.5E-02)); +#325612 = VECTOR('',#325613,1.); +#325613 = DIRECTION('',(-0.707107137271,0.707106425102,0.)); +#325614 = ORIENTED_EDGE('',*,*,#325615,.F.); +#325615 = EDGE_CURVE('',#325616,#325608,#325618,.T.); +#325616 = VERTEX_POINT('',#325617); +#325617 = CARTESIAN_POINT('',(144.307107,-68.9,0.)); +#325618 = LINE('',#325619,#325620); +#325619 = CARTESIAN_POINT('',(144.307107,-68.9,0.)); +#325620 = VECTOR('',#325621,1.); +#325621 = DIRECTION('',(0.,0.,-1.)); +#325622 = ORIENTED_EDGE('',*,*,#325623,.F.); +#325623 = EDGE_CURVE('',#325585,#325616,#325624,.T.); +#325624 = LINE('',#325625,#325626); +#325625 = CARTESIAN_POINT('',(145.3,-69.892892,0.)); +#325626 = VECTOR('',#325627,1.); +#325627 = DIRECTION('',(-0.707107137271,0.707106425102,0.)); +#325628 = PLANE('',#325629); +#325629 = AXIS2_PLACEMENT_3D('',#325630,#325631,#325632); +#325630 = CARTESIAN_POINT('',(145.3,-69.892892,0.)); +#325631 = DIRECTION('',(0.707106425102,0.707107137271,0.)); +#325632 = DIRECTION('',(-0.707107137271,0.707106425102,0.)); +#325633 = ADVANCED_FACE('',(#325634),#325659,.F.); +#325634 = FACE_BOUND('',#325635,.F.); +#325635 = EDGE_LOOP('',(#325636,#325637,#325645,#325653)); +#325636 = ORIENTED_EDGE('',*,*,#325615,.T.); +#325637 = ORIENTED_EDGE('',*,*,#325638,.T.); +#325638 = EDGE_CURVE('',#325608,#325639,#325641,.T.); +#325639 = VERTEX_POINT('',#325640); +#325640 = CARTESIAN_POINT('',(133.475736,-68.9,-3.5E-02)); +#325641 = LINE('',#325642,#325643); +#325642 = CARTESIAN_POINT('',(144.307107,-68.9,-3.5E-02)); +#325643 = VECTOR('',#325644,1.); +#325644 = DIRECTION('',(-1.,0.,0.)); +#325645 = ORIENTED_EDGE('',*,*,#325646,.F.); +#325646 = EDGE_CURVE('',#325647,#325639,#325649,.T.); +#325647 = VERTEX_POINT('',#325648); +#325648 = CARTESIAN_POINT('',(133.475736,-68.9,0.)); +#325649 = LINE('',#325650,#325651); +#325650 = CARTESIAN_POINT('',(133.475736,-68.9,0.)); +#325651 = VECTOR('',#325652,1.); +#325652 = DIRECTION('',(0.,0.,-1.)); +#325653 = ORIENTED_EDGE('',*,*,#325654,.F.); +#325654 = EDGE_CURVE('',#325616,#325647,#325655,.T.); +#325655 = LINE('',#325656,#325657); +#325656 = CARTESIAN_POINT('',(144.307107,-68.9,0.)); +#325657 = VECTOR('',#325658,1.); +#325658 = DIRECTION('',(-1.,0.,0.)); +#325659 = PLANE('',#325660); +#325660 = AXIS2_PLACEMENT_3D('',#325661,#325662,#325663); +#325661 = CARTESIAN_POINT('',(144.307107,-68.9,0.)); +#325662 = DIRECTION('',(0.,1.,0.)); +#325663 = DIRECTION('',(-1.,0.,0.)); +#325664 = ADVANCED_FACE('',(#325665),#325690,.F.); +#325665 = FACE_BOUND('',#325666,.F.); +#325666 = EDGE_LOOP('',(#325667,#325668,#325676,#325684)); +#325667 = ORIENTED_EDGE('',*,*,#325646,.T.); +#325668 = ORIENTED_EDGE('',*,*,#325669,.T.); +#325669 = EDGE_CURVE('',#325639,#325670,#325672,.T.); +#325670 = VERTEX_POINT('',#325671); +#325671 = CARTESIAN_POINT('',(132.05,-70.325736,-3.5E-02)); +#325672 = LINE('',#325673,#325674); +#325673 = CARTESIAN_POINT('',(133.475736,-68.9,-3.5E-02)); +#325674 = VECTOR('',#325675,1.); +#325675 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#325676 = ORIENTED_EDGE('',*,*,#325677,.F.); +#325677 = EDGE_CURVE('',#325678,#325670,#325680,.T.); +#325678 = VERTEX_POINT('',#325679); +#325679 = CARTESIAN_POINT('',(132.05,-70.325736,0.)); +#325680 = LINE('',#325681,#325682); +#325681 = CARTESIAN_POINT('',(132.05,-70.325736,0.)); +#325682 = VECTOR('',#325683,1.); +#325683 = DIRECTION('',(0.,0.,-1.)); +#325684 = ORIENTED_EDGE('',*,*,#325685,.F.); +#325685 = EDGE_CURVE('',#325647,#325678,#325686,.T.); +#325686 = LINE('',#325687,#325688); +#325687 = CARTESIAN_POINT('',(133.475736,-68.9,0.)); +#325688 = VECTOR('',#325689,1.); +#325689 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#325690 = PLANE('',#325691); +#325691 = AXIS2_PLACEMENT_3D('',#325692,#325693,#325694); +#325692 = CARTESIAN_POINT('',(133.475736,-68.9,0.)); +#325693 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#325694 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#325695 = ADVANCED_FACE('',(#325696),#325721,.F.); +#325696 = FACE_BOUND('',#325697,.F.); +#325697 = EDGE_LOOP('',(#325698,#325699,#325707,#325715)); +#325698 = ORIENTED_EDGE('',*,*,#325677,.T.); +#325699 = ORIENTED_EDGE('',*,*,#325700,.T.); +#325700 = EDGE_CURVE('',#325670,#325701,#325703,.T.); +#325701 = VERTEX_POINT('',#325702); +#325702 = CARTESIAN_POINT('',(132.048079,-80.12098,-3.5E-02)); +#325703 = LINE('',#325704,#325705); +#325704 = CARTESIAN_POINT('',(132.05,-70.325736,-3.5E-02)); +#325705 = VECTOR('',#325706,1.); +#325706 = DIRECTION('',(-1.961155804866E-04,-0.999999980769,0.)); +#325707 = ORIENTED_EDGE('',*,*,#325708,.F.); +#325708 = EDGE_CURVE('',#325709,#325701,#325711,.T.); +#325709 = VERTEX_POINT('',#325710); +#325710 = CARTESIAN_POINT('',(132.048079,-80.12098,0.)); +#325711 = LINE('',#325712,#325713); +#325712 = CARTESIAN_POINT('',(132.048079,-80.12098,0.)); +#325713 = VECTOR('',#325714,1.); +#325714 = DIRECTION('',(0.,0.,-1.)); +#325715 = ORIENTED_EDGE('',*,*,#325716,.F.); +#325716 = EDGE_CURVE('',#325678,#325709,#325717,.T.); +#325717 = LINE('',#325718,#325719); +#325718 = CARTESIAN_POINT('',(132.05,-70.325736,0.)); +#325719 = VECTOR('',#325720,1.); +#325720 = DIRECTION('',(-1.961155804866E-04,-0.999999980769,0.)); +#325721 = PLANE('',#325722); +#325722 = AXIS2_PLACEMENT_3D('',#325723,#325724,#325725); +#325723 = CARTESIAN_POINT('',(132.05,-70.325736,0.)); +#325724 = DIRECTION('',(-0.999999980769,1.961155804866E-04,0.)); +#325725 = DIRECTION('',(-1.961155804866E-04,-0.999999980769,0.)); +#325726 = ADVANCED_FACE('',(#325727),#325752,.F.); +#325727 = FACE_BOUND('',#325728,.F.); +#325728 = EDGE_LOOP('',(#325729,#325730,#325738,#325746)); +#325729 = ORIENTED_EDGE('',*,*,#325708,.T.); +#325730 = ORIENTED_EDGE('',*,*,#325731,.T.); +#325731 = EDGE_CURVE('',#325701,#325732,#325734,.T.); +#325732 = VERTEX_POINT('',#325733); +#325733 = CARTESIAN_POINT('',(132.033147,-80.157028,-3.5E-02)); +#325734 = LINE('',#325735,#325736); +#325735 = CARTESIAN_POINT('',(132.048079,-80.12098,-3.5E-02)); +#325736 = VECTOR('',#325737,1.); +#325737 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325738 = ORIENTED_EDGE('',*,*,#325739,.F.); +#325739 = EDGE_CURVE('',#325740,#325732,#325742,.T.); +#325740 = VERTEX_POINT('',#325741); +#325741 = CARTESIAN_POINT('',(132.033147,-80.157028,0.)); +#325742 = LINE('',#325743,#325744); +#325743 = CARTESIAN_POINT('',(132.033147,-80.157028,0.)); +#325744 = VECTOR('',#325745,1.); +#325745 = DIRECTION('',(0.,0.,-1.)); +#325746 = ORIENTED_EDGE('',*,*,#325747,.F.); +#325747 = EDGE_CURVE('',#325709,#325740,#325748,.T.); +#325748 = LINE('',#325749,#325750); +#325749 = CARTESIAN_POINT('',(132.048079,-80.12098,0.)); +#325750 = VECTOR('',#325751,1.); +#325751 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325752 = PLANE('',#325753); +#325753 = AXIS2_PLACEMENT_3D('',#325754,#325755,#325756); +#325754 = CARTESIAN_POINT('',(132.048079,-80.12098,0.)); +#325755 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#325756 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325757 = ADVANCED_FACE('',(#325758),#325783,.F.); +#325758 = FACE_BOUND('',#325759,.F.); +#325759 = EDGE_LOOP('',(#325760,#325761,#325769,#325777)); +#325760 = ORIENTED_EDGE('',*,*,#325739,.T.); +#325761 = ORIENTED_EDGE('',*,*,#325762,.T.); +#325762 = EDGE_CURVE('',#325732,#325763,#325765,.T.); +#325763 = VERTEX_POINT('',#325764); +#325764 = CARTESIAN_POINT('',(131.7,-80.492892,-3.5E-02)); +#325765 = LINE('',#325766,#325767); +#325766 = CARTESIAN_POINT('',(132.033147,-80.157028,-3.5E-02)); +#325767 = VECTOR('',#325768,1.); +#325768 = DIRECTION('',(-0.704229258309,-0.709972641545,0.)); +#325769 = ORIENTED_EDGE('',*,*,#325770,.F.); +#325770 = EDGE_CURVE('',#325771,#325763,#325773,.T.); +#325771 = VERTEX_POINT('',#325772); +#325772 = CARTESIAN_POINT('',(131.7,-80.492892,0.)); +#325773 = LINE('',#325774,#325775); +#325774 = CARTESIAN_POINT('',(131.7,-80.492892,0.)); +#325775 = VECTOR('',#325776,1.); +#325776 = DIRECTION('',(0.,0.,-1.)); +#325777 = ORIENTED_EDGE('',*,*,#325778,.F.); +#325778 = EDGE_CURVE('',#325740,#325771,#325779,.T.); +#325779 = LINE('',#325780,#325781); +#325780 = CARTESIAN_POINT('',(132.033147,-80.157028,0.)); +#325781 = VECTOR('',#325782,1.); +#325782 = DIRECTION('',(-0.704229258309,-0.709972641545,0.)); +#325783 = PLANE('',#325784); +#325784 = AXIS2_PLACEMENT_3D('',#325785,#325786,#325787); +#325785 = CARTESIAN_POINT('',(132.033147,-80.157028,0.)); +#325786 = DIRECTION('',(-0.709972641545,0.704229258309,0.)); +#325787 = DIRECTION('',(-0.704229258309,-0.709972641545,0.)); +#325788 = ADVANCED_FACE('',(#325789),#325814,.F.); +#325789 = FACE_BOUND('',#325790,.F.); +#325790 = EDGE_LOOP('',(#325791,#325792,#325800,#325808)); +#325791 = ORIENTED_EDGE('',*,*,#325770,.T.); +#325792 = ORIENTED_EDGE('',*,*,#325793,.T.); +#325793 = EDGE_CURVE('',#325763,#325794,#325796,.T.); +#325794 = VERTEX_POINT('',#325795); +#325795 = CARTESIAN_POINT('',(131.698079,-86.869509,-3.5E-02)); +#325796 = LINE('',#325797,#325798); +#325797 = CARTESIAN_POINT('',(131.7,-80.492892,-3.5E-02)); +#325798 = VECTOR('',#325799,1.); +#325799 = DIRECTION('',(-3.012569067282E-04,-0.999999954622,0.)); +#325800 = ORIENTED_EDGE('',*,*,#325801,.F.); +#325801 = EDGE_CURVE('',#325802,#325794,#325804,.T.); +#325802 = VERTEX_POINT('',#325803); +#325803 = CARTESIAN_POINT('',(131.698079,-86.869509,0.)); +#325804 = LINE('',#325805,#325806); +#325805 = CARTESIAN_POINT('',(131.698079,-86.869509,0.)); +#325806 = VECTOR('',#325807,1.); +#325807 = DIRECTION('',(0.,0.,-1.)); +#325808 = ORIENTED_EDGE('',*,*,#325809,.F.); +#325809 = EDGE_CURVE('',#325771,#325802,#325810,.T.); +#325810 = LINE('',#325811,#325812); +#325811 = CARTESIAN_POINT('',(131.7,-80.492892,0.)); +#325812 = VECTOR('',#325813,1.); +#325813 = DIRECTION('',(-3.012569067282E-04,-0.999999954622,0.)); +#325814 = PLANE('',#325815); +#325815 = AXIS2_PLACEMENT_3D('',#325816,#325817,#325818); +#325816 = CARTESIAN_POINT('',(131.7,-80.492892,0.)); +#325817 = DIRECTION('',(-0.999999954622,3.012569067282E-04,0.)); +#325818 = DIRECTION('',(-3.012569067282E-04,-0.999999954622,0.)); +#325819 = ADVANCED_FACE('',(#325820),#325845,.F.); +#325820 = FACE_BOUND('',#325821,.F.); +#325821 = EDGE_LOOP('',(#325822,#325823,#325831,#325839)); +#325822 = ORIENTED_EDGE('',*,*,#325801,.T.); +#325823 = ORIENTED_EDGE('',*,*,#325824,.T.); +#325824 = EDGE_CURVE('',#325794,#325825,#325827,.T.); +#325825 = VERTEX_POINT('',#325826); +#325826 = CARTESIAN_POINT('',(131.683147,-86.905557,-3.5E-02)); +#325827 = LINE('',#325828,#325829); +#325828 = CARTESIAN_POINT('',(131.698079,-86.869509,-3.5E-02)); +#325829 = VECTOR('',#325830,1.); +#325830 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325831 = ORIENTED_EDGE('',*,*,#325832,.F.); +#325832 = EDGE_CURVE('',#325833,#325825,#325835,.T.); +#325833 = VERTEX_POINT('',#325834); +#325834 = CARTESIAN_POINT('',(131.683147,-86.905557,0.)); +#325835 = LINE('',#325836,#325837); +#325836 = CARTESIAN_POINT('',(131.683147,-86.905557,0.)); +#325837 = VECTOR('',#325838,1.); +#325838 = DIRECTION('',(0.,0.,-1.)); +#325839 = ORIENTED_EDGE('',*,*,#325840,.F.); +#325840 = EDGE_CURVE('',#325802,#325833,#325841,.T.); +#325841 = LINE('',#325842,#325843); +#325842 = CARTESIAN_POINT('',(131.698079,-86.869509,0.)); +#325843 = VECTOR('',#325844,1.); +#325844 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325845 = PLANE('',#325846); +#325846 = AXIS2_PLACEMENT_3D('',#325847,#325848,#325849); +#325847 = CARTESIAN_POINT('',(131.698079,-86.869509,0.)); +#325848 = DIRECTION('',(-0.923875640631,0.38269282806,0.)); +#325849 = DIRECTION('',(-0.38269282806,-0.923875640631,0.)); +#325850 = ADVANCED_FACE('',(#325851),#325876,.F.); +#325851 = FACE_BOUND('',#325852,.F.); +#325852 = EDGE_LOOP('',(#325853,#325854,#325862,#325870)); +#325853 = ORIENTED_EDGE('',*,*,#325832,.T.); +#325854 = ORIENTED_EDGE('',*,*,#325855,.T.); +#325855 = EDGE_CURVE('',#325825,#325856,#325858,.T.); +#325856 = VERTEX_POINT('',#325857); +#325857 = CARTESIAN_POINT('',(131.3695,-87.221921,-3.5E-02)); +#325858 = LINE('',#325859,#325860); +#325859 = CARTESIAN_POINT('',(131.683147,-86.905557,-3.5E-02)); +#325860 = VECTOR('',#325861,1.); +#325861 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#325862 = ORIENTED_EDGE('',*,*,#325863,.F.); +#325863 = EDGE_CURVE('',#325864,#325856,#325866,.T.); +#325864 = VERTEX_POINT('',#325865); +#325865 = CARTESIAN_POINT('',(131.3695,-87.221921,0.)); +#325866 = LINE('',#325867,#325868); +#325867 = CARTESIAN_POINT('',(131.3695,-87.221921,0.)); +#325868 = VECTOR('',#325869,1.); +#325869 = DIRECTION('',(0.,0.,-1.)); +#325870 = ORIENTED_EDGE('',*,*,#325871,.F.); +#325871 = EDGE_CURVE('',#325833,#325864,#325872,.T.); +#325872 = LINE('',#325873,#325874); +#325873 = CARTESIAN_POINT('',(131.683147,-86.905557,0.)); +#325874 = VECTOR('',#325875,1.); +#325875 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#325876 = PLANE('',#325877); +#325877 = AXIS2_PLACEMENT_3D('',#325878,#325879,#325880); +#325878 = CARTESIAN_POINT('',(131.683147,-86.905557,0.)); +#325879 = DIRECTION('',(-0.710149662328,0.704050748948,0.)); +#325880 = DIRECTION('',(-0.704050748948,-0.710149662328,0.)); +#325881 = ADVANCED_FACE('',(#325882),#325907,.F.); +#325882 = FACE_BOUND('',#325883,.F.); +#325883 = EDGE_LOOP('',(#325884,#325885,#325893,#325901)); +#325884 = ORIENTED_EDGE('',*,*,#325863,.T.); +#325885 = ORIENTED_EDGE('',*,*,#325886,.T.); +#325886 = EDGE_CURVE('',#325856,#325887,#325889,.T.); +#325887 = VERTEX_POINT('',#325888); +#325888 = CARTESIAN_POINT('',(131.377164,-87.235195,-3.5E-02)); +#325889 = LINE('',#325890,#325891); +#325890 = CARTESIAN_POINT('',(131.3695,-87.221921,-3.5E-02)); +#325891 = VECTOR('',#325892,1.); +#325892 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#325893 = ORIENTED_EDGE('',*,*,#325894,.F.); +#325894 = EDGE_CURVE('',#325895,#325887,#325897,.T.); +#325895 = VERTEX_POINT('',#325896); +#325896 = CARTESIAN_POINT('',(131.377164,-87.235195,0.)); +#325897 = LINE('',#325898,#325899); +#325898 = CARTESIAN_POINT('',(131.377164,-87.235195,0.)); +#325899 = VECTOR('',#325900,1.); +#325900 = DIRECTION('',(0.,0.,-1.)); +#325901 = ORIENTED_EDGE('',*,*,#325902,.F.); +#325902 = EDGE_CURVE('',#325864,#325895,#325903,.T.); +#325903 = LINE('',#325904,#325905); +#325904 = CARTESIAN_POINT('',(131.3695,-87.221921,0.)); +#325905 = VECTOR('',#325906,1.); +#325906 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#325907 = PLANE('',#325908); +#325908 = AXIS2_PLACEMENT_3D('',#325909,#325910,#325911); +#325909 = CARTESIAN_POINT('',(131.3695,-87.221921,0.)); +#325910 = DIRECTION('',(-0.866018269693,-0.500012356405,-0.)); +#325911 = DIRECTION('',(0.500012356405,-0.866018269693,0.)); +#325912 = ADVANCED_FACE('',(#325913),#325940,.T.); +#325913 = FACE_BOUND('',#325914,.F.); +#325914 = EDGE_LOOP('',(#325915,#325916,#325925,#325933)); +#325915 = ORIENTED_EDGE('',*,*,#325894,.T.); +#325916 = ORIENTED_EDGE('',*,*,#325917,.T.); +#325917 = EDGE_CURVE('',#325887,#325918,#325920,.T.); +#325918 = VERTEX_POINT('',#325919); +#325919 = CARTESIAN_POINT('',(131.214805,-87.072836,-3.5E-02)); +#325920 = CIRCLE('',#325921,0.299999934501); +#325921 = AXIS2_PLACEMENT_3D('',#325922,#325923,#325924); +#325922 = CARTESIAN_POINT('',(131.10000014059,-87.3499998594,-3.5E-02)); +#325923 = DIRECTION('',(0.,0.,-1.)); +#325924 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#325925 = ORIENTED_EDGE('',*,*,#325926,.F.); +#325926 = EDGE_CURVE('',#325927,#325918,#325929,.T.); +#325927 = VERTEX_POINT('',#325928); +#325928 = CARTESIAN_POINT('',(131.214805,-87.072836,0.)); +#325929 = LINE('',#325930,#325931); +#325930 = CARTESIAN_POINT('',(131.214805,-87.072836,0.)); +#325931 = VECTOR('',#325932,1.); +#325932 = DIRECTION('',(0.,0.,-1.)); +#325933 = ORIENTED_EDGE('',*,*,#325934,.F.); +#325934 = EDGE_CURVE('',#325895,#325927,#325935,.T.); +#325935 = CIRCLE('',#325936,0.299999934501); +#325936 = AXIS2_PLACEMENT_3D('',#325937,#325938,#325939); +#325937 = CARTESIAN_POINT('',(131.10000014059,-87.3499998594,0.)); +#325938 = DIRECTION('',(0.,0.,-1.)); +#325939 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#325940 = CYLINDRICAL_SURFACE('',#325941,0.299999934501); +#325941 = AXIS2_PLACEMENT_3D('',#325942,#325943,#325944); +#325942 = CARTESIAN_POINT('',(131.10000014059,-87.3499998594,0.)); +#325943 = DIRECTION('',(-0.,-0.,1.)); +#325944 = DIRECTION('',(0.923879733049,0.382682948224,0.)); +#325945 = ADVANCED_FACE('',(#325946),#325971,.F.); +#325946 = FACE_BOUND('',#325947,.F.); +#325947 = EDGE_LOOP('',(#325948,#325949,#325957,#325965)); +#325948 = ORIENTED_EDGE('',*,*,#325926,.T.); +#325949 = ORIENTED_EDGE('',*,*,#325950,.T.); +#325950 = EDGE_CURVE('',#325918,#325951,#325953,.T.); +#325951 = VERTEX_POINT('',#325952); +#325952 = CARTESIAN_POINT('',(131.228078,-87.080499,-3.5E-02)); +#325953 = LINE('',#325954,#325955); +#325954 = CARTESIAN_POINT('',(131.214805,-87.072836,-3.5E-02)); +#325955 = VECTOR('',#325956,1.); +#325956 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#325957 = ORIENTED_EDGE('',*,*,#325958,.F.); +#325958 = EDGE_CURVE('',#325959,#325951,#325961,.T.); +#325959 = VERTEX_POINT('',#325960); +#325960 = CARTESIAN_POINT('',(131.228078,-87.080499,0.)); +#325961 = LINE('',#325962,#325963); +#325962 = CARTESIAN_POINT('',(131.228078,-87.080499,0.)); +#325963 = VECTOR('',#325964,1.); +#325964 = DIRECTION('',(0.,0.,-1.)); +#325965 = ORIENTED_EDGE('',*,*,#325966,.F.); +#325966 = EDGE_CURVE('',#325927,#325959,#325967,.T.); +#325967 = LINE('',#325968,#325969); +#325968 = CARTESIAN_POINT('',(131.214805,-87.072836,0.)); +#325969 = VECTOR('',#325970,1.); +#325970 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#325971 = PLANE('',#325972); +#325972 = AXIS2_PLACEMENT_3D('',#325973,#325974,#325975); +#325973 = CARTESIAN_POINT('',(131.214805,-87.072836,0.)); +#325974 = DIRECTION('',(-0.499991674903,-0.866030210228,-0.)); +#325975 = DIRECTION('',(0.866030210228,-0.499991674903,0.)); +#325976 = ADVANCED_FACE('',(#325977),#326002,.F.); +#325977 = FACE_BOUND('',#325978,.F.); +#325978 = EDGE_LOOP('',(#325979,#325980,#325988,#325996)); +#325979 = ORIENTED_EDGE('',*,*,#325958,.T.); +#325980 = ORIENTED_EDGE('',*,*,#325981,.T.); +#325981 = EDGE_CURVE('',#325951,#325982,#325984,.T.); +#325982 = VERTEX_POINT('',#325983); +#325983 = CARTESIAN_POINT('',(131.5,-86.808578,-3.5E-02)); +#325984 = LINE('',#325985,#325986); +#325985 = CARTESIAN_POINT('',(131.228078,-87.080499,-3.5E-02)); +#325986 = VECTOR('',#325987,1.); +#325987 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#325988 = ORIENTED_EDGE('',*,*,#325989,.F.); +#325989 = EDGE_CURVE('',#325990,#325982,#325992,.T.); +#325990 = VERTEX_POINT('',#325991); +#325991 = CARTESIAN_POINT('',(131.5,-86.808578,0.)); +#325992 = LINE('',#325993,#325994); +#325993 = CARTESIAN_POINT('',(131.5,-86.808578,0.)); +#325994 = VECTOR('',#325995,1.); +#325995 = DIRECTION('',(0.,0.,-1.)); +#325996 = ORIENTED_EDGE('',*,*,#325997,.F.); +#325997 = EDGE_CURVE('',#325959,#325990,#325998,.T.); +#325998 = LINE('',#325999,#326000); +#325999 = CARTESIAN_POINT('',(131.228078,-87.080499,0.)); +#326000 = VECTOR('',#326001,1.); +#326001 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#326002 = PLANE('',#326003); +#326003 = AXIS2_PLACEMENT_3D('',#326004,#326005,#326006); +#326004 = CARTESIAN_POINT('',(131.228078,-87.080499,0.)); +#326005 = DIRECTION('',(0.707105480981,-0.707108081389,0.)); +#326006 = DIRECTION('',(0.707108081389,0.707105480981,0.)); +#326007 = ADVANCED_FACE('',(#326008),#326033,.F.); +#326008 = FACE_BOUND('',#326009,.F.); +#326009 = EDGE_LOOP('',(#326010,#326011,#326019,#326027)); +#326010 = ORIENTED_EDGE('',*,*,#325989,.T.); +#326011 = ORIENTED_EDGE('',*,*,#326012,.T.); +#326012 = EDGE_CURVE('',#325982,#326013,#326015,.T.); +#326013 = VERTEX_POINT('',#326014); +#326014 = CARTESIAN_POINT('',(131.501921,-80.431962,-3.5E-02)); +#326015 = LINE('',#326016,#326017); +#326016 = CARTESIAN_POINT('',(131.5,-86.808578,-3.5E-02)); +#326017 = VECTOR('',#326018,1.); +#326018 = DIRECTION('',(3.012569539767E-04,0.999999954622,0.)); +#326019 = ORIENTED_EDGE('',*,*,#326020,.F.); +#326020 = EDGE_CURVE('',#326021,#326013,#326023,.T.); +#326021 = VERTEX_POINT('',#326022); +#326022 = CARTESIAN_POINT('',(131.501921,-80.431962,0.)); +#326023 = LINE('',#326024,#326025); +#326024 = CARTESIAN_POINT('',(131.501921,-80.431962,0.)); +#326025 = VECTOR('',#326026,1.); +#326026 = DIRECTION('',(0.,0.,-1.)); +#326027 = ORIENTED_EDGE('',*,*,#326028,.F.); +#326028 = EDGE_CURVE('',#325990,#326021,#326029,.T.); +#326029 = LINE('',#326030,#326031); +#326030 = CARTESIAN_POINT('',(131.5,-86.808578,0.)); +#326031 = VECTOR('',#326032,1.); +#326032 = DIRECTION('',(3.012569539767E-04,0.999999954622,0.)); +#326033 = PLANE('',#326034); +#326034 = AXIS2_PLACEMENT_3D('',#326035,#326036,#326037); +#326035 = CARTESIAN_POINT('',(131.5,-86.808578,0.)); +#326036 = DIRECTION('',(0.999999954622,-3.012569539767E-04,0.)); +#326037 = DIRECTION('',(3.012569539767E-04,0.999999954622,0.)); +#326038 = ADVANCED_FACE('',(#326039),#326064,.F.); +#326039 = FACE_BOUND('',#326040,.F.); +#326040 = EDGE_LOOP('',(#326041,#326042,#326050,#326058)); +#326041 = ORIENTED_EDGE('',*,*,#326020,.T.); +#326042 = ORIENTED_EDGE('',*,*,#326043,.T.); +#326043 = EDGE_CURVE('',#326013,#326044,#326046,.T.); +#326044 = VERTEX_POINT('',#326045); +#326045 = CARTESIAN_POINT('',(131.516853,-80.395914,-3.5E-02)); +#326046 = LINE('',#326047,#326048); +#326047 = CARTESIAN_POINT('',(131.501921,-80.431962,-3.5E-02)); +#326048 = VECTOR('',#326049,1.); +#326049 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326050 = ORIENTED_EDGE('',*,*,#326051,.F.); +#326051 = EDGE_CURVE('',#326052,#326044,#326054,.T.); +#326052 = VERTEX_POINT('',#326053); +#326053 = CARTESIAN_POINT('',(131.516853,-80.395914,0.)); +#326054 = LINE('',#326055,#326056); +#326055 = CARTESIAN_POINT('',(131.516853,-80.395914,0.)); +#326056 = VECTOR('',#326057,1.); +#326057 = DIRECTION('',(0.,0.,-1.)); +#326058 = ORIENTED_EDGE('',*,*,#326059,.F.); +#326059 = EDGE_CURVE('',#326021,#326052,#326060,.T.); +#326060 = LINE('',#326061,#326062); +#326061 = CARTESIAN_POINT('',(131.501921,-80.431962,0.)); +#326062 = VECTOR('',#326063,1.); +#326063 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326064 = PLANE('',#326065); +#326065 = AXIS2_PLACEMENT_3D('',#326066,#326067,#326068); +#326066 = CARTESIAN_POINT('',(131.501921,-80.431962,0.)); +#326067 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#326068 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326069 = ADVANCED_FACE('',(#326070),#326095,.F.); +#326070 = FACE_BOUND('',#326071,.F.); +#326071 = EDGE_LOOP('',(#326072,#326073,#326081,#326089)); +#326072 = ORIENTED_EDGE('',*,*,#326051,.T.); +#326073 = ORIENTED_EDGE('',*,*,#326074,.T.); +#326074 = EDGE_CURVE('',#326044,#326075,#326077,.T.); +#326075 = VERTEX_POINT('',#326076); +#326076 = CARTESIAN_POINT('',(131.85,-80.060049,-3.5E-02)); +#326077 = LINE('',#326078,#326079); +#326078 = CARTESIAN_POINT('',(131.516853,-80.395914,-3.5E-02)); +#326079 = VECTOR('',#326080,1.); +#326080 = DIRECTION('',(0.70422820141,0.709973689892,0.)); +#326081 = ORIENTED_EDGE('',*,*,#326082,.F.); +#326082 = EDGE_CURVE('',#326083,#326075,#326085,.T.); +#326083 = VERTEX_POINT('',#326084); +#326084 = CARTESIAN_POINT('',(131.85,-80.060049,0.)); +#326085 = LINE('',#326086,#326087); +#326086 = CARTESIAN_POINT('',(131.85,-80.060049,0.)); +#326087 = VECTOR('',#326088,1.); +#326088 = DIRECTION('',(0.,0.,-1.)); +#326089 = ORIENTED_EDGE('',*,*,#326090,.F.); +#326090 = EDGE_CURVE('',#326052,#326083,#326091,.T.); +#326091 = LINE('',#326092,#326093); +#326092 = CARTESIAN_POINT('',(131.516853,-80.395914,0.)); +#326093 = VECTOR('',#326094,1.); +#326094 = DIRECTION('',(0.70422820141,0.709973689892,0.)); +#326095 = PLANE('',#326096); +#326096 = AXIS2_PLACEMENT_3D('',#326097,#326098,#326099); +#326097 = CARTESIAN_POINT('',(131.516853,-80.395914,0.)); +#326098 = DIRECTION('',(0.709973689892,-0.70422820141,0.)); +#326099 = DIRECTION('',(0.70422820141,0.709973689892,0.)); +#326100 = ADVANCED_FACE('',(#326101),#326126,.F.); +#326101 = FACE_BOUND('',#326102,.F.); +#326102 = EDGE_LOOP('',(#326103,#326104,#326112,#326120)); +#326103 = ORIENTED_EDGE('',*,*,#326082,.T.); +#326104 = ORIENTED_EDGE('',*,*,#326105,.T.); +#326105 = EDGE_CURVE('',#326075,#326106,#326108,.T.); +#326106 = VERTEX_POINT('',#326107); +#326107 = CARTESIAN_POINT('',(131.851921,-70.264806,-3.5E-02)); +#326108 = LINE('',#326109,#326110); +#326109 = CARTESIAN_POINT('',(131.85,-80.060049,-3.5E-02)); +#326110 = VECTOR('',#326111,1.); +#326111 = DIRECTION('',(1.961156005081E-04,0.999999980769,0.)); +#326112 = ORIENTED_EDGE('',*,*,#326113,.F.); +#326113 = EDGE_CURVE('',#326114,#326106,#326116,.T.); +#326114 = VERTEX_POINT('',#326115); +#326115 = CARTESIAN_POINT('',(131.851921,-70.264806,0.)); +#326116 = LINE('',#326117,#326118); +#326117 = CARTESIAN_POINT('',(131.851921,-70.264806,0.)); +#326118 = VECTOR('',#326119,1.); +#326119 = DIRECTION('',(0.,0.,-1.)); +#326120 = ORIENTED_EDGE('',*,*,#326121,.F.); +#326121 = EDGE_CURVE('',#326083,#326114,#326122,.T.); +#326122 = LINE('',#326123,#326124); +#326123 = CARTESIAN_POINT('',(131.85,-80.060049,0.)); +#326124 = VECTOR('',#326125,1.); +#326125 = DIRECTION('',(1.961156005081E-04,0.999999980769,0.)); +#326126 = PLANE('',#326127); +#326127 = AXIS2_PLACEMENT_3D('',#326128,#326129,#326130); +#326128 = CARTESIAN_POINT('',(131.85,-80.060049,0.)); +#326129 = DIRECTION('',(0.999999980769,-1.961156005081E-04,0.)); +#326130 = DIRECTION('',(1.961156005081E-04,0.999999980769,0.)); +#326131 = ADVANCED_FACE('',(#326132),#326157,.F.); +#326132 = FACE_BOUND('',#326133,.F.); +#326133 = EDGE_LOOP('',(#326134,#326135,#326143,#326151)); +#326134 = ORIENTED_EDGE('',*,*,#326113,.T.); +#326135 = ORIENTED_EDGE('',*,*,#326136,.T.); +#326136 = EDGE_CURVE('',#326106,#326137,#326139,.T.); +#326137 = VERTEX_POINT('',#326138); +#326138 = CARTESIAN_POINT('',(131.866853,-70.228758,-3.5E-02)); +#326139 = LINE('',#326140,#326141); +#326140 = CARTESIAN_POINT('',(131.851921,-70.264806,-3.5E-02)); +#326141 = VECTOR('',#326142,1.); +#326142 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326143 = ORIENTED_EDGE('',*,*,#326144,.F.); +#326144 = EDGE_CURVE('',#326145,#326137,#326147,.T.); +#326145 = VERTEX_POINT('',#326146); +#326146 = CARTESIAN_POINT('',(131.866853,-70.228758,0.)); +#326147 = LINE('',#326148,#326149); +#326148 = CARTESIAN_POINT('',(131.866853,-70.228758,0.)); +#326149 = VECTOR('',#326150,1.); +#326150 = DIRECTION('',(0.,0.,-1.)); +#326151 = ORIENTED_EDGE('',*,*,#326152,.F.); +#326152 = EDGE_CURVE('',#326114,#326145,#326153,.T.); +#326153 = LINE('',#326154,#326155); +#326154 = CARTESIAN_POINT('',(131.851921,-70.264806,0.)); +#326155 = VECTOR('',#326156,1.); +#326156 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326157 = PLANE('',#326158); +#326158 = AXIS2_PLACEMENT_3D('',#326159,#326160,#326161); +#326159 = CARTESIAN_POINT('',(131.851921,-70.264806,0.)); +#326160 = DIRECTION('',(0.923875640631,-0.38269282806,0.)); +#326161 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#326162 = ADVANCED_FACE('',(#326163),#326179,.F.); +#326163 = FACE_BOUND('',#326164,.F.); +#326164 = EDGE_LOOP('',(#326165,#326166,#326172,#326173)); +#326165 = ORIENTED_EDGE('',*,*,#326144,.T.); +#326166 = ORIENTED_EDGE('',*,*,#326167,.T.); +#326167 = EDGE_CURVE('',#326137,#325288,#326168,.T.); +#326168 = LINE('',#326169,#326170); +#326169 = CARTESIAN_POINT('',(131.866853,-70.228758,-3.5E-02)); +#326170 = VECTOR('',#326171,1.); +#326171 = DIRECTION('',(0.70710654734,0.707107015033,0.)); +#326172 = ORIENTED_EDGE('',*,*,#325285,.F.); +#326173 = ORIENTED_EDGE('',*,*,#326174,.F.); +#326174 = EDGE_CURVE('',#326145,#325286,#326175,.T.); +#326175 = LINE('',#326176,#326177); +#326176 = CARTESIAN_POINT('',(131.866853,-70.228758,0.)); +#326177 = VECTOR('',#326178,1.); +#326178 = DIRECTION('',(0.70710654734,0.707107015033,0.)); +#326179 = PLANE('',#326180); +#326180 = AXIS2_PLACEMENT_3D('',#326181,#326182,#326183); +#326181 = CARTESIAN_POINT('',(131.866853,-70.228758,0.)); +#326182 = DIRECTION('',(0.707107015033,-0.70710654734,0.)); +#326183 = DIRECTION('',(0.70710654734,0.707107015033,0.)); +#326184 = ADVANCED_FACE('',(#326185),#326212,.F.); +#326185 = FACE_BOUND('',#326186,.F.); +#326186 = EDGE_LOOP('',(#326187,#326197,#326204,#326205)); +#326187 = ORIENTED_EDGE('',*,*,#326188,.T.); +#326188 = EDGE_CURVE('',#326189,#326191,#326193,.T.); +#326189 = VERTEX_POINT('',#326190); +#326190 = CARTESIAN_POINT('',(131.237255,-87.35,0.)); +#326191 = VERTEX_POINT('',#326192); +#326192 = CARTESIAN_POINT('',(131.237255,-87.35,-3.5E-02)); +#326193 = LINE('',#326194,#326195); +#326194 = CARTESIAN_POINT('',(131.237255,-87.35,0.)); +#326195 = VECTOR('',#326196,1.); +#326196 = DIRECTION('',(0.,0.,-1.)); +#326197 = ORIENTED_EDGE('',*,*,#326198,.T.); +#326198 = EDGE_CURVE('',#326191,#326191,#326199,.T.); +#326199 = CIRCLE('',#326200,0.137255); +#326200 = AXIS2_PLACEMENT_3D('',#326201,#326202,#326203); +#326201 = CARTESIAN_POINT('',(131.1,-87.35,-3.5E-02)); +#326202 = DIRECTION('',(0.,0.,1.)); +#326203 = DIRECTION('',(1.,0.,-0.)); +#326204 = ORIENTED_EDGE('',*,*,#326188,.F.); +#326205 = ORIENTED_EDGE('',*,*,#326206,.F.); +#326206 = EDGE_CURVE('',#326189,#326189,#326207,.T.); +#326207 = CIRCLE('',#326208,0.137255); +#326208 = AXIS2_PLACEMENT_3D('',#326209,#326210,#326211); +#326209 = CARTESIAN_POINT('',(131.1,-87.35,0.)); +#326210 = DIRECTION('',(0.,0.,1.)); +#326211 = DIRECTION('',(1.,0.,-0.)); +#326212 = CYLINDRICAL_SURFACE('',#326213,0.137255); +#326213 = AXIS2_PLACEMENT_3D('',#326214,#326215,#326216); +#326214 = CARTESIAN_POINT('',(131.1,-87.35,0.)); +#326215 = DIRECTION('',(0.,0.,1.)); +#326216 = DIRECTION('',(1.,0.,-0.)); +#326217 = ADVANCED_FACE('',(#326218),#326245,.F.); +#326218 = FACE_BOUND('',#326219,.F.); +#326219 = EDGE_LOOP('',(#326220,#326230,#326237,#326238)); +#326220 = ORIENTED_EDGE('',*,*,#326221,.T.); +#326221 = EDGE_CURVE('',#326222,#326224,#326226,.T.); +#326222 = VERTEX_POINT('',#326223); +#326223 = CARTESIAN_POINT('',(145.537255,-70.95,0.)); +#326224 = VERTEX_POINT('',#326225); +#326225 = CARTESIAN_POINT('',(145.537255,-70.95,-3.5E-02)); +#326226 = LINE('',#326227,#326228); +#326227 = CARTESIAN_POINT('',(145.537255,-70.95,0.)); +#326228 = VECTOR('',#326229,1.); +#326229 = DIRECTION('',(0.,0.,-1.)); +#326230 = ORIENTED_EDGE('',*,*,#326231,.T.); +#326231 = EDGE_CURVE('',#326224,#326224,#326232,.T.); +#326232 = CIRCLE('',#326233,0.137255); +#326233 = AXIS2_PLACEMENT_3D('',#326234,#326235,#326236); +#326234 = CARTESIAN_POINT('',(145.4,-70.95,-3.5E-02)); +#326235 = DIRECTION('',(0.,0.,1.)); +#326236 = DIRECTION('',(1.,0.,-0.)); +#326237 = ORIENTED_EDGE('',*,*,#326221,.F.); +#326238 = ORIENTED_EDGE('',*,*,#326239,.F.); +#326239 = EDGE_CURVE('',#326222,#326222,#326240,.T.); +#326240 = CIRCLE('',#326241,0.137255); +#326241 = AXIS2_PLACEMENT_3D('',#326242,#326243,#326244); +#326242 = CARTESIAN_POINT('',(145.4,-70.95,0.)); +#326243 = DIRECTION('',(0.,0.,1.)); +#326244 = DIRECTION('',(1.,0.,-0.)); +#326245 = CYLINDRICAL_SURFACE('',#326246,0.137255); +#326246 = AXIS2_PLACEMENT_3D('',#326247,#326248,#326249); +#326247 = CARTESIAN_POINT('',(145.4,-70.95,0.)); +#326248 = DIRECTION('',(0.,0.,1.)); +#326249 = DIRECTION('',(1.,0.,-0.)); +#326250 = ADVANCED_FACE('',(#326251,#326282,#326285),#326288,.F.); +#326251 = FACE_BOUND('',#326252,.F.); +#326252 = EDGE_LOOP('',(#326253,#326254,#326255,#326256,#326257,#326258, + #326259,#326260,#326261,#326262,#326263,#326264,#326265,#326266, + #326267,#326268,#326269,#326270,#326271,#326272,#326273,#326274, + #326275,#326276,#326277,#326278,#326279,#326280,#326281)); +#326253 = ORIENTED_EDGE('',*,*,#325311,.T.); +#326254 = ORIENTED_EDGE('',*,*,#325342,.T.); +#326255 = ORIENTED_EDGE('',*,*,#325373,.T.); +#326256 = ORIENTED_EDGE('',*,*,#325404,.T.); +#326257 = ORIENTED_EDGE('',*,*,#325435,.T.); +#326258 = ORIENTED_EDGE('',*,*,#325466,.T.); +#326259 = ORIENTED_EDGE('',*,*,#325497,.T.); +#326260 = ORIENTED_EDGE('',*,*,#325529,.T.); +#326261 = ORIENTED_EDGE('',*,*,#325561,.T.); +#326262 = ORIENTED_EDGE('',*,*,#325592,.T.); +#326263 = ORIENTED_EDGE('',*,*,#325623,.T.); +#326264 = ORIENTED_EDGE('',*,*,#325654,.T.); +#326265 = ORIENTED_EDGE('',*,*,#325685,.T.); +#326266 = ORIENTED_EDGE('',*,*,#325716,.T.); +#326267 = ORIENTED_EDGE('',*,*,#325747,.T.); +#326268 = ORIENTED_EDGE('',*,*,#325778,.T.); +#326269 = ORIENTED_EDGE('',*,*,#325809,.T.); +#326270 = ORIENTED_EDGE('',*,*,#325840,.T.); +#326271 = ORIENTED_EDGE('',*,*,#325871,.T.); +#326272 = ORIENTED_EDGE('',*,*,#325902,.T.); +#326273 = ORIENTED_EDGE('',*,*,#325934,.T.); +#326274 = ORIENTED_EDGE('',*,*,#325966,.T.); +#326275 = ORIENTED_EDGE('',*,*,#325997,.T.); +#326276 = ORIENTED_EDGE('',*,*,#326028,.T.); +#326277 = ORIENTED_EDGE('',*,*,#326059,.T.); +#326278 = ORIENTED_EDGE('',*,*,#326090,.T.); +#326279 = ORIENTED_EDGE('',*,*,#326121,.T.); +#326280 = ORIENTED_EDGE('',*,*,#326152,.T.); +#326281 = ORIENTED_EDGE('',*,*,#326174,.T.); +#326282 = FACE_BOUND('',#326283,.F.); +#326283 = EDGE_LOOP('',(#326284)); +#326284 = ORIENTED_EDGE('',*,*,#326206,.T.); +#326285 = FACE_BOUND('',#326286,.F.); +#326286 = EDGE_LOOP('',(#326287)); +#326287 = ORIENTED_EDGE('',*,*,#326239,.T.); +#326288 = PLANE('',#326289); +#326289 = AXIS2_PLACEMENT_3D('',#326290,#326291,#326292); +#326290 = CARTESIAN_POINT('',(0.,0.,0.)); +#326291 = DIRECTION('',(-0.,-0.,-1.)); +#326292 = DIRECTION('',(-1.,0.,0.)); +#326293 = ADVANCED_FACE('',(#326294,#326325,#326328),#326331,.T.); +#326294 = FACE_BOUND('',#326295,.T.); +#326295 = EDGE_LOOP('',(#326296,#326297,#326298,#326299,#326300,#326301, + #326302,#326303,#326304,#326305,#326306,#326307,#326308,#326309, + #326310,#326311,#326312,#326313,#326314,#326315,#326316,#326317, + #326318,#326319,#326320,#326321,#326322,#326323,#326324)); +#326296 = ORIENTED_EDGE('',*,*,#325295,.T.); +#326297 = ORIENTED_EDGE('',*,*,#325326,.T.); +#326298 = ORIENTED_EDGE('',*,*,#325357,.T.); +#326299 = ORIENTED_EDGE('',*,*,#325388,.T.); +#326300 = ORIENTED_EDGE('',*,*,#325419,.T.); +#326301 = ORIENTED_EDGE('',*,*,#325450,.T.); +#326302 = ORIENTED_EDGE('',*,*,#325481,.T.); +#326303 = ORIENTED_EDGE('',*,*,#325512,.T.); +#326304 = ORIENTED_EDGE('',*,*,#325545,.T.); +#326305 = ORIENTED_EDGE('',*,*,#325576,.T.); +#326306 = ORIENTED_EDGE('',*,*,#325607,.T.); +#326307 = ORIENTED_EDGE('',*,*,#325638,.T.); +#326308 = ORIENTED_EDGE('',*,*,#325669,.T.); +#326309 = ORIENTED_EDGE('',*,*,#325700,.T.); +#326310 = ORIENTED_EDGE('',*,*,#325731,.T.); +#326311 = ORIENTED_EDGE('',*,*,#325762,.T.); +#326312 = ORIENTED_EDGE('',*,*,#325793,.T.); +#326313 = ORIENTED_EDGE('',*,*,#325824,.T.); +#326314 = ORIENTED_EDGE('',*,*,#325855,.T.); +#326315 = ORIENTED_EDGE('',*,*,#325886,.T.); +#326316 = ORIENTED_EDGE('',*,*,#325917,.T.); +#326317 = ORIENTED_EDGE('',*,*,#325950,.T.); +#326318 = ORIENTED_EDGE('',*,*,#325981,.T.); +#326319 = ORIENTED_EDGE('',*,*,#326012,.T.); +#326320 = ORIENTED_EDGE('',*,*,#326043,.T.); +#326321 = ORIENTED_EDGE('',*,*,#326074,.T.); +#326322 = ORIENTED_EDGE('',*,*,#326105,.T.); +#326323 = ORIENTED_EDGE('',*,*,#326136,.T.); +#326324 = ORIENTED_EDGE('',*,*,#326167,.T.); +#326325 = FACE_BOUND('',#326326,.T.); +#326326 = EDGE_LOOP('',(#326327)); +#326327 = ORIENTED_EDGE('',*,*,#326198,.T.); +#326328 = FACE_BOUND('',#326329,.T.); +#326329 = EDGE_LOOP('',(#326330)); +#326330 = ORIENTED_EDGE('',*,*,#326231,.T.); +#326331 = PLANE('',#326332); +#326332 = AXIS2_PLACEMENT_3D('',#326333,#326334,#326335); +#326333 = CARTESIAN_POINT('',(0.,0.,-3.5E-02)); +#326334 = DIRECTION('',(-0.,-0.,-1.)); +#326335 = DIRECTION('',(-1.,0.,0.)); +#326336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#326340)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#326337,#326338,#326339)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#326337 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#326338 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#326339 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#326340 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#326337, + 'distance_accuracy_value','confusion accuracy'); +#326341 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#326342,#326344); +#326342 = ( REPRESENTATION_RELATIONSHIP('','',#182991,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#326343) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#326343 = ITEM_DEFINED_TRANSFORMATION('','',#11,#355); +#326344 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #326345); +#326345 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('112','=>[0:1:1:51]','',#5, + #182986,$); +#326346 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#182988)); +#326347 = SHAPE_DEFINITION_REPRESENTATION(#326348,#326354); +#326348 = PRODUCT_DEFINITION_SHAPE('','',#326349); +#326349 = PRODUCT_DEFINITION('design','',#326350,#326353); +#326350 = PRODUCT_DEFINITION_FORMATION('','',#326351); +#326351 = PRODUCT('snips_controller-unsaved-export-kiHHnP_pad', + 'snips_controller-unsaved-export-kiHHnP_pad','',(#326352)); +#326352 = PRODUCT_CONTEXT('',#2,'mechanical'); +#326353 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#326354 = SHAPE_REPRESENTATION('',(#11,#326355,#326447,#326539,#326631, + #326723,#326815,#326907,#326999,#327091,#327183,#327275,#327367, + #327459,#327551,#327643,#327735,#327827,#327919,#328011,#328103, + #328195,#328287,#328379,#328471,#328563,#328655,#328747,#328839, + #328931,#329023,#329115,#329405,#329695,#329748,#330038,#330328, + #330478,#330628,#330918,#331208,#331498,#331788,#332078,#332368, + #332658,#332948,#333238,#333330,#333422,#333514,#333606,#333698, + #333790,#333882,#333974,#334066,#334158,#334250,#334342,#334434, + #334526,#334618,#334710,#334802,#334894,#334947,#335237,#335527, + #335817,#336107,#336160,#336450,#336740,#337030,#337320,#337373, + #337426,#337576,#337866,#338156,#338306,#338596,#338886,#339036, + #339326,#339616,#339766,#340056,#340206,#340356,#340646,#340936, + #341086,#341376,#341526,#341676,#341966,#342256,#342406,#342696, + #342986,#343276,#343566,#343856,#344146,#344296,#344446,#344736, + #345026,#345176,#345466,#345756,#345906,#346196,#346346,#346438, + #346530,#346622,#346772,#347062,#347352,#347642,#347932,#348082, + #348232,#348522,#348812,#349102,#349392,#349682,#349832,#350122, + #350272,#350562,#350654,#350746,#350838,#350988,#351080,#351172, + #351264,#351414,#351506,#351598,#351690,#351840,#351990,#352280, + #352570,#352720,#353010,#353300,#353450,#353542,#353634,#353726, + #353876,#353968,#354060,#354152,#354442,#354732,#355022,#355312, + #355462,#355752,#356042,#356332,#356482,#356772,#356922,#357212, + #357502,#357594,#357686,#357778,#357928,#358020,#358112,#358204, + #358354,#358644,#358934,#359224,#359514,#359664,#359954,#360244, + #360534,#360824,#361114,#361404,#361694,#361984,#362274,#362564, + #362854,#363144,#363434,#363724,#364014,#364304,#364594,#364884, + #365174,#365464,#365754,#366044,#366334,#366624,#366914,#367204, + #367494,#367784,#368074,#368166,#368258,#368350,#368640,#368930, + #369220,#369510,#369602,#369694,#369786,#369936,#370226,#370318, + #370410,#370502,#370792,#371082,#371372,#371662,#371812,#372102, + #372392,#372682,#372972,#373262,#373354,#373446,#373538,#373630, + #373722,#373814,#374104,#374394,#374684,#374974,#375264,#375554, + #375844,#376134,#376424,#376714,#377004,#377294,#377584,#377874, + #378164,#378454,#378744,#379034,#379324,#379614,#379764,#380054, + #380204,#380494,#380586,#380678,#380770,#381060,#381350,#381640, + #381930,#382220,#382510,#382800,#383090,#383380,#383530,#383680, + #383830,#383980,#384130,#384280,#384430,#384580,#384730,#384880, + #385030,#385180,#385330,#385620,#385910,#386200,#386490,#386780, + #387070,#387360,#387650,#387940,#388230,#388520,#388810,#389100, + #389390,#389684,#389978,#390272,#390566,#390860,#391154,#391448, + #391742,#392036,#392330,#392624,#392918,#393208,#393300,#393392, + #393484,#393576,#393668,#393760,#393852,#393944,#394036,#394326, + #394616,#394906,#395196,#395486,#395776,#396066,#396356,#396646, + #396936,#397226,#397516,#397806,#398096,#398386,#398579,#398772, + #398864,#399154,#399444,#399734,#400024,#400314,#400604,#400894, + #401184,#401474,#401764,#402054,#402344,#402634,#402924,#403214, + #403504,#403794,#404084,#404374,#404664,#407540,#407632,#407724, + #407816,#407908,#408000,#408092,#408382,#408672,#408962,#409252, + #409542,#409832,#410122,#410412,#410702,#410992,#411321,#411650, + #411742,#412032,#412322,#412612,#412902,#413192,#413482,#413772, + #414062,#414352,#414642,#414932,#415222,#415512,#415802,#416092, + #416382,#416672,#416962,#417252,#417542,#417634,#417726,#417818), + #417968); +#326355 = MANIFOLD_SOLID_BREP('',#326356); +#326356 = CLOSED_SHELL('',(#326357,#326390,#326410,#326430)); +#326357 = ADVANCED_FACE('',(#326358),#326385,.T.); +#326358 = FACE_BOUND('',#326359,.F.); +#326359 = EDGE_LOOP('',(#326360,#326370,#326377,#326378)); +#326360 = ORIENTED_EDGE('',*,*,#326361,.T.); +#326361 = EDGE_CURVE('',#326362,#326364,#326366,.T.); +#326362 = VERTEX_POINT('',#326363); +#326363 = CARTESIAN_POINT('',(140.7155,-127.5,1.51)); +#326364 = VERTEX_POINT('',#326365); +#326365 = CARTESIAN_POINT('',(140.7155,-127.5,1.55)); +#326366 = LINE('',#326367,#326368); +#326367 = CARTESIAN_POINT('',(140.7155,-127.5,1.51)); +#326368 = VECTOR('',#326369,1.); +#326369 = DIRECTION('',(0.,0.,1.)); +#326370 = ORIENTED_EDGE('',*,*,#326371,.T.); +#326371 = EDGE_CURVE('',#326364,#326364,#326372,.T.); +#326372 = CIRCLE('',#326373,0.7155); +#326373 = AXIS2_PLACEMENT_3D('',#326374,#326375,#326376); +#326374 = CARTESIAN_POINT('',(140.,-127.5,1.55)); +#326375 = DIRECTION('',(0.,0.,1.)); +#326376 = DIRECTION('',(1.,0.,-0.)); +#326377 = ORIENTED_EDGE('',*,*,#326361,.F.); +#326378 = ORIENTED_EDGE('',*,*,#326379,.F.); +#326379 = EDGE_CURVE('',#326362,#326362,#326380,.T.); +#326380 = CIRCLE('',#326381,0.7155); +#326381 = AXIS2_PLACEMENT_3D('',#326382,#326383,#326384); +#326382 = CARTESIAN_POINT('',(140.,-127.5,1.51)); +#326383 = DIRECTION('',(0.,0.,1.)); +#326384 = DIRECTION('',(1.,0.,-0.)); +#326385 = CYLINDRICAL_SURFACE('',#326386,0.7155); +#326386 = AXIS2_PLACEMENT_3D('',#326387,#326388,#326389); +#326387 = CARTESIAN_POINT('',(140.,-127.5,1.51)); +#326388 = DIRECTION('',(-0.,-0.,-1.)); +#326389 = DIRECTION('',(1.,0.,-0.)); +#326390 = ADVANCED_FACE('',(#326391,#326394),#326405,.F.); +#326391 = FACE_BOUND('',#326392,.F.); +#326392 = EDGE_LOOP('',(#326393)); +#326393 = ORIENTED_EDGE('',*,*,#326379,.T.); +#326394 = FACE_BOUND('',#326395,.F.); +#326395 = EDGE_LOOP('',(#326396)); +#326396 = ORIENTED_EDGE('',*,*,#326397,.T.); +#326397 = EDGE_CURVE('',#326398,#326398,#326400,.T.); +#326398 = VERTEX_POINT('',#326399); +#326399 = CARTESIAN_POINT('',(140.,-127.935,1.51)); +#326400 = CIRCLE('',#326401,0.435); +#326401 = AXIS2_PLACEMENT_3D('',#326402,#326403,#326404); +#326402 = CARTESIAN_POINT('',(140.,-127.5,1.51)); +#326403 = DIRECTION('',(-0.,0.,-1.)); +#326404 = DIRECTION('',(-0.,-1.,0.)); +#326405 = PLANE('',#326406); +#326406 = AXIS2_PLACEMENT_3D('',#326407,#326408,#326409); +#326407 = CARTESIAN_POINT('',(0.,0.,1.51)); +#326408 = DIRECTION('',(0.,0.,1.)); +#326409 = DIRECTION('',(1.,0.,-0.)); +#326410 = ADVANCED_FACE('',(#326411,#326414),#326425,.T.); +#326411 = FACE_BOUND('',#326412,.T.); +#326412 = EDGE_LOOP('',(#326413)); +#326413 = ORIENTED_EDGE('',*,*,#326371,.T.); +#326414 = FACE_BOUND('',#326415,.T.); +#326415 = EDGE_LOOP('',(#326416)); +#326416 = ORIENTED_EDGE('',*,*,#326417,.T.); +#326417 = EDGE_CURVE('',#326418,#326418,#326420,.T.); +#326418 = VERTEX_POINT('',#326419); +#326419 = CARTESIAN_POINT('',(140.,-127.935,1.55)); +#326420 = CIRCLE('',#326421,0.435); +#326421 = AXIS2_PLACEMENT_3D('',#326422,#326423,#326424); +#326422 = CARTESIAN_POINT('',(140.,-127.5,1.55)); +#326423 = DIRECTION('',(-0.,0.,-1.)); +#326424 = DIRECTION('',(-0.,-1.,0.)); +#326425 = PLANE('',#326426); +#326426 = AXIS2_PLACEMENT_3D('',#326427,#326428,#326429); +#326427 = CARTESIAN_POINT('',(0.,0.,1.55)); +#326428 = DIRECTION('',(0.,0.,1.)); +#326429 = DIRECTION('',(1.,0.,-0.)); +#326430 = ADVANCED_FACE('',(#326431),#326442,.F.); +#326431 = FACE_BOUND('',#326432,.T.); +#326432 = EDGE_LOOP('',(#326433,#326434,#326440,#326441)); +#326433 = ORIENTED_EDGE('',*,*,#326397,.T.); +#326434 = ORIENTED_EDGE('',*,*,#326435,.T.); +#326435 = EDGE_CURVE('',#326398,#326418,#326436,.T.); +#326436 = LINE('',#326437,#326438); +#326437 = CARTESIAN_POINT('',(140.,-127.935,-4.6E-02)); +#326438 = VECTOR('',#326439,1.); +#326439 = DIRECTION('',(0.,0.,1.)); +#326440 = ORIENTED_EDGE('',*,*,#326417,.F.); +#326441 = ORIENTED_EDGE('',*,*,#326435,.F.); +#326442 = CYLINDRICAL_SURFACE('',#326443,0.435); +#326443 = AXIS2_PLACEMENT_3D('',#326444,#326445,#326446); +#326444 = CARTESIAN_POINT('',(140.,-127.5,-4.6E-02)); +#326445 = DIRECTION('',(-0.,-0.,-1.)); +#326446 = DIRECTION('',(-0.,-1.,0.)); +#326447 = MANIFOLD_SOLID_BREP('',#326448); +#326448 = CLOSED_SHELL('',(#326449,#326482,#326502,#326522)); +#326449 = ADVANCED_FACE('',(#326450),#326477,.T.); +#326450 = FACE_BOUND('',#326451,.T.); +#326451 = EDGE_LOOP('',(#326452,#326462,#326469,#326470)); +#326452 = ORIENTED_EDGE('',*,*,#326453,.T.); +#326453 = EDGE_CURVE('',#326454,#326456,#326458,.T.); +#326454 = VERTEX_POINT('',#326455); +#326455 = CARTESIAN_POINT('',(140.7155,-127.5,0.)); +#326456 = VERTEX_POINT('',#326457); +#326457 = CARTESIAN_POINT('',(140.7155,-127.5,-4.E-02)); +#326458 = LINE('',#326459,#326460); +#326459 = CARTESIAN_POINT('',(140.7155,-127.5,0.)); +#326460 = VECTOR('',#326461,1.); +#326461 = DIRECTION('',(0.,0.,-1.)); +#326462 = ORIENTED_EDGE('',*,*,#326463,.T.); +#326463 = EDGE_CURVE('',#326456,#326456,#326464,.T.); +#326464 = CIRCLE('',#326465,0.7155); +#326465 = AXIS2_PLACEMENT_3D('',#326466,#326467,#326468); +#326466 = CARTESIAN_POINT('',(140.,-127.5,-4.E-02)); +#326467 = DIRECTION('',(0.,0.,1.)); +#326468 = DIRECTION('',(1.,0.,-0.)); +#326469 = ORIENTED_EDGE('',*,*,#326453,.F.); +#326470 = ORIENTED_EDGE('',*,*,#326471,.F.); +#326471 = EDGE_CURVE('',#326454,#326454,#326472,.T.); +#326472 = CIRCLE('',#326473,0.7155); +#326473 = AXIS2_PLACEMENT_3D('',#326474,#326475,#326476); +#326474 = CARTESIAN_POINT('',(140.,-127.5,0.)); +#326475 = DIRECTION('',(0.,0.,1.)); +#326476 = DIRECTION('',(1.,0.,-0.)); +#326477 = CYLINDRICAL_SURFACE('',#326478,0.7155); +#326478 = AXIS2_PLACEMENT_3D('',#326479,#326480,#326481); +#326479 = CARTESIAN_POINT('',(140.,-127.5,0.)); +#326480 = DIRECTION('',(0.,0.,1.)); +#326481 = DIRECTION('',(1.,0.,-0.)); +#326482 = ADVANCED_FACE('',(#326483,#326486),#326497,.F.); +#326483 = FACE_BOUND('',#326484,.F.); +#326484 = EDGE_LOOP('',(#326485)); +#326485 = ORIENTED_EDGE('',*,*,#326471,.F.); +#326486 = FACE_BOUND('',#326487,.F.); +#326487 = EDGE_LOOP('',(#326488)); +#326488 = ORIENTED_EDGE('',*,*,#326489,.F.); +#326489 = EDGE_CURVE('',#326490,#326490,#326492,.T.); +#326490 = VERTEX_POINT('',#326491); +#326491 = CARTESIAN_POINT('',(140.,-127.935,0.)); +#326492 = CIRCLE('',#326493,0.435); +#326493 = AXIS2_PLACEMENT_3D('',#326494,#326495,#326496); +#326494 = CARTESIAN_POINT('',(140.,-127.5,0.)); +#326495 = DIRECTION('',(-0.,0.,-1.)); +#326496 = DIRECTION('',(-0.,-1.,0.)); +#326497 = PLANE('',#326498); +#326498 = AXIS2_PLACEMENT_3D('',#326499,#326500,#326501); +#326499 = CARTESIAN_POINT('',(0.,0.,0.)); +#326500 = DIRECTION('',(-0.,-0.,-1.)); +#326501 = DIRECTION('',(-1.,0.,0.)); +#326502 = ADVANCED_FACE('',(#326503,#326506),#326517,.T.); +#326503 = FACE_BOUND('',#326504,.T.); +#326504 = EDGE_LOOP('',(#326505)); +#326505 = ORIENTED_EDGE('',*,*,#326463,.F.); +#326506 = FACE_BOUND('',#326507,.T.); +#326507 = EDGE_LOOP('',(#326508)); +#326508 = ORIENTED_EDGE('',*,*,#326509,.F.); +#326509 = EDGE_CURVE('',#326510,#326510,#326512,.T.); +#326510 = VERTEX_POINT('',#326511); +#326511 = CARTESIAN_POINT('',(140.,-127.935,-4.E-02)); +#326512 = CIRCLE('',#326513,0.435); +#326513 = AXIS2_PLACEMENT_3D('',#326514,#326515,#326516); +#326514 = CARTESIAN_POINT('',(140.,-127.5,-4.E-02)); +#326515 = DIRECTION('',(-0.,0.,-1.)); +#326516 = DIRECTION('',(-0.,-1.,0.)); +#326517 = PLANE('',#326518); +#326518 = AXIS2_PLACEMENT_3D('',#326519,#326520,#326521); +#326519 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#326520 = DIRECTION('',(-0.,-0.,-1.)); +#326521 = DIRECTION('',(-1.,0.,0.)); +#326522 = ADVANCED_FACE('',(#326523),#326534,.F.); +#326523 = FACE_BOUND('',#326524,.T.); +#326524 = EDGE_LOOP('',(#326525,#326526,#326532,#326533)); +#326525 = ORIENTED_EDGE('',*,*,#326509,.T.); +#326526 = ORIENTED_EDGE('',*,*,#326527,.T.); +#326527 = EDGE_CURVE('',#326510,#326490,#326528,.T.); +#326528 = LINE('',#326529,#326530); +#326529 = CARTESIAN_POINT('',(140.,-127.935,-4.6E-02)); +#326530 = VECTOR('',#326531,1.); +#326531 = DIRECTION('',(0.,0.,1.)); +#326532 = ORIENTED_EDGE('',*,*,#326489,.F.); +#326533 = ORIENTED_EDGE('',*,*,#326527,.F.); +#326534 = CYLINDRICAL_SURFACE('',#326535,0.435); +#326535 = AXIS2_PLACEMENT_3D('',#326536,#326537,#326538); +#326536 = CARTESIAN_POINT('',(140.,-127.5,-4.6E-02)); +#326537 = DIRECTION('',(-0.,-0.,-1.)); +#326538 = DIRECTION('',(-0.,-1.,0.)); +#326539 = MANIFOLD_SOLID_BREP('',#326540); +#326540 = CLOSED_SHELL('',(#326541,#326574,#326594,#326614)); +#326541 = ADVANCED_FACE('',(#326542),#326569,.T.); +#326542 = FACE_BOUND('',#326543,.F.); +#326543 = EDGE_LOOP('',(#326544,#326554,#326561,#326562)); +#326544 = ORIENTED_EDGE('',*,*,#326545,.T.); +#326545 = EDGE_CURVE('',#326546,#326548,#326550,.T.); +#326546 = VERTEX_POINT('',#326547); +#326547 = CARTESIAN_POINT('',(140.,-127.96,-4.E-02)); +#326548 = VERTEX_POINT('',#326549); +#326549 = CARTESIAN_POINT('',(140.,-127.96,1.55)); +#326550 = LINE('',#326551,#326552); +#326551 = CARTESIAN_POINT('',(140.,-127.96,-4.E-02)); +#326552 = VECTOR('',#326553,1.); +#326553 = DIRECTION('',(0.,0.,1.)); +#326554 = ORIENTED_EDGE('',*,*,#326555,.T.); +#326555 = EDGE_CURVE('',#326548,#326548,#326556,.T.); +#326556 = CIRCLE('',#326557,0.46); +#326557 = AXIS2_PLACEMENT_3D('',#326558,#326559,#326560); +#326558 = CARTESIAN_POINT('',(140.,-127.5,1.55)); +#326559 = DIRECTION('',(0.,0.,1.)); +#326560 = DIRECTION('',(-0.,-1.,0.)); +#326561 = ORIENTED_EDGE('',*,*,#326545,.F.); +#326562 = ORIENTED_EDGE('',*,*,#326563,.F.); +#326563 = EDGE_CURVE('',#326546,#326546,#326564,.T.); +#326564 = CIRCLE('',#326565,0.46); +#326565 = AXIS2_PLACEMENT_3D('',#326566,#326567,#326568); +#326566 = CARTESIAN_POINT('',(140.,-127.5,-4.E-02)); +#326567 = DIRECTION('',(0.,0.,1.)); +#326568 = DIRECTION('',(-0.,-1.,0.)); +#326569 = CYLINDRICAL_SURFACE('',#326570,0.46); +#326570 = AXIS2_PLACEMENT_3D('',#326571,#326572,#326573); +#326571 = CARTESIAN_POINT('',(140.,-127.5,-4.E-02)); +#326572 = DIRECTION('',(-0.,-0.,-1.)); +#326573 = DIRECTION('',(-0.,-1.,0.)); +#326574 = ADVANCED_FACE('',(#326575,#326578),#326589,.F.); +#326575 = FACE_BOUND('',#326576,.F.); +#326576 = EDGE_LOOP('',(#326577)); +#326577 = ORIENTED_EDGE('',*,*,#326563,.T.); +#326578 = FACE_BOUND('',#326579,.F.); +#326579 = EDGE_LOOP('',(#326580)); +#326580 = ORIENTED_EDGE('',*,*,#326581,.T.); +#326581 = EDGE_CURVE('',#326582,#326582,#326584,.T.); +#326582 = VERTEX_POINT('',#326583); +#326583 = CARTESIAN_POINT('',(140.,-127.935,-4.E-02)); +#326584 = CIRCLE('',#326585,0.435); +#326585 = AXIS2_PLACEMENT_3D('',#326586,#326587,#326588); +#326586 = CARTESIAN_POINT('',(140.,-127.5,-4.E-02)); +#326587 = DIRECTION('',(-0.,0.,-1.)); +#326588 = DIRECTION('',(-0.,-1.,0.)); +#326589 = PLANE('',#326590); +#326590 = AXIS2_PLACEMENT_3D('',#326591,#326592,#326593); +#326591 = CARTESIAN_POINT('',(140.,-127.96,-4.E-02)); +#326592 = DIRECTION('',(0.,0.,1.)); +#326593 = DIRECTION('',(1.,0.,-0.)); +#326594 = ADVANCED_FACE('',(#326595,#326598),#326609,.T.); +#326595 = FACE_BOUND('',#326596,.T.); +#326596 = EDGE_LOOP('',(#326597)); +#326597 = ORIENTED_EDGE('',*,*,#326555,.T.); +#326598 = FACE_BOUND('',#326599,.T.); +#326599 = EDGE_LOOP('',(#326600)); +#326600 = ORIENTED_EDGE('',*,*,#326601,.T.); +#326601 = EDGE_CURVE('',#326602,#326602,#326604,.T.); +#326602 = VERTEX_POINT('',#326603); +#326603 = CARTESIAN_POINT('',(140.,-127.935,1.55)); +#326604 = CIRCLE('',#326605,0.435); +#326605 = AXIS2_PLACEMENT_3D('',#326606,#326607,#326608); +#326606 = CARTESIAN_POINT('',(140.,-127.5,1.55)); +#326607 = DIRECTION('',(-0.,0.,-1.)); +#326608 = DIRECTION('',(-0.,-1.,0.)); +#326609 = PLANE('',#326610); +#326610 = AXIS2_PLACEMENT_3D('',#326611,#326612,#326613); +#326611 = CARTESIAN_POINT('',(140.,-127.96,1.55)); +#326612 = DIRECTION('',(0.,0.,1.)); +#326613 = DIRECTION('',(1.,0.,-0.)); +#326614 = ADVANCED_FACE('',(#326615),#326626,.F.); +#326615 = FACE_BOUND('',#326616,.T.); +#326616 = EDGE_LOOP('',(#326617,#326618,#326624,#326625)); +#326617 = ORIENTED_EDGE('',*,*,#326581,.T.); +#326618 = ORIENTED_EDGE('',*,*,#326619,.T.); +#326619 = EDGE_CURVE('',#326582,#326602,#326620,.T.); +#326620 = LINE('',#326621,#326622); +#326621 = CARTESIAN_POINT('',(140.,-127.935,-4.6E-02)); +#326622 = VECTOR('',#326623,1.); +#326623 = DIRECTION('',(0.,0.,1.)); +#326624 = ORIENTED_EDGE('',*,*,#326601,.F.); +#326625 = ORIENTED_EDGE('',*,*,#326619,.F.); +#326626 = CYLINDRICAL_SURFACE('',#326627,0.435); +#326627 = AXIS2_PLACEMENT_3D('',#326628,#326629,#326630); +#326628 = CARTESIAN_POINT('',(140.,-127.5,-4.6E-02)); +#326629 = DIRECTION('',(-0.,-0.,-1.)); +#326630 = DIRECTION('',(-0.,-1.,0.)); +#326631 = MANIFOLD_SOLID_BREP('',#326632); +#326632 = CLOSED_SHELL('',(#326633,#326666,#326686,#326706)); +#326633 = ADVANCED_FACE('',(#326634),#326661,.T.); +#326634 = FACE_BOUND('',#326635,.F.); +#326635 = EDGE_LOOP('',(#326636,#326646,#326653,#326654)); +#326636 = ORIENTED_EDGE('',*,*,#326637,.T.); +#326637 = EDGE_CURVE('',#326638,#326640,#326642,.T.); +#326638 = VERTEX_POINT('',#326639); +#326639 = CARTESIAN_POINT('',(138.7155,-127.5,1.51)); +#326640 = VERTEX_POINT('',#326641); +#326641 = CARTESIAN_POINT('',(138.7155,-127.5,1.55)); +#326642 = LINE('',#326643,#326644); +#326643 = CARTESIAN_POINT('',(138.7155,-127.5,1.51)); +#326644 = VECTOR('',#326645,1.); +#326645 = DIRECTION('',(0.,0.,1.)); +#326646 = ORIENTED_EDGE('',*,*,#326647,.T.); +#326647 = EDGE_CURVE('',#326640,#326640,#326648,.T.); +#326648 = CIRCLE('',#326649,0.7155); +#326649 = AXIS2_PLACEMENT_3D('',#326650,#326651,#326652); +#326650 = CARTESIAN_POINT('',(138.,-127.5,1.55)); +#326651 = DIRECTION('',(0.,0.,1.)); +#326652 = DIRECTION('',(1.,0.,-0.)); +#326653 = ORIENTED_EDGE('',*,*,#326637,.F.); +#326654 = ORIENTED_EDGE('',*,*,#326655,.F.); +#326655 = EDGE_CURVE('',#326638,#326638,#326656,.T.); +#326656 = CIRCLE('',#326657,0.7155); +#326657 = AXIS2_PLACEMENT_3D('',#326658,#326659,#326660); +#326658 = CARTESIAN_POINT('',(138.,-127.5,1.51)); +#326659 = DIRECTION('',(0.,0.,1.)); +#326660 = DIRECTION('',(1.,0.,-0.)); +#326661 = CYLINDRICAL_SURFACE('',#326662,0.7155); +#326662 = AXIS2_PLACEMENT_3D('',#326663,#326664,#326665); +#326663 = CARTESIAN_POINT('',(138.,-127.5,1.51)); +#326664 = DIRECTION('',(-0.,-0.,-1.)); +#326665 = DIRECTION('',(1.,0.,-0.)); +#326666 = ADVANCED_FACE('',(#326667,#326670),#326681,.F.); +#326667 = FACE_BOUND('',#326668,.F.); +#326668 = EDGE_LOOP('',(#326669)); +#326669 = ORIENTED_EDGE('',*,*,#326655,.T.); +#326670 = FACE_BOUND('',#326671,.F.); +#326671 = EDGE_LOOP('',(#326672)); +#326672 = ORIENTED_EDGE('',*,*,#326673,.T.); +#326673 = EDGE_CURVE('',#326674,#326674,#326676,.T.); +#326674 = VERTEX_POINT('',#326675); +#326675 = CARTESIAN_POINT('',(138.,-127.935,1.51)); +#326676 = CIRCLE('',#326677,0.435); +#326677 = AXIS2_PLACEMENT_3D('',#326678,#326679,#326680); +#326678 = CARTESIAN_POINT('',(138.,-127.5,1.51)); +#326679 = DIRECTION('',(-0.,0.,-1.)); +#326680 = DIRECTION('',(-0.,-1.,0.)); +#326681 = PLANE('',#326682); +#326682 = AXIS2_PLACEMENT_3D('',#326683,#326684,#326685); +#326683 = CARTESIAN_POINT('',(0.,0.,1.51)); +#326684 = DIRECTION('',(0.,0.,1.)); +#326685 = DIRECTION('',(1.,0.,-0.)); +#326686 = ADVANCED_FACE('',(#326687,#326690),#326701,.T.); +#326687 = FACE_BOUND('',#326688,.T.); +#326688 = EDGE_LOOP('',(#326689)); +#326689 = ORIENTED_EDGE('',*,*,#326647,.T.); +#326690 = FACE_BOUND('',#326691,.T.); +#326691 = EDGE_LOOP('',(#326692)); +#326692 = ORIENTED_EDGE('',*,*,#326693,.T.); +#326693 = EDGE_CURVE('',#326694,#326694,#326696,.T.); +#326694 = VERTEX_POINT('',#326695); +#326695 = CARTESIAN_POINT('',(138.,-127.935,1.55)); +#326696 = CIRCLE('',#326697,0.435); +#326697 = AXIS2_PLACEMENT_3D('',#326698,#326699,#326700); +#326698 = CARTESIAN_POINT('',(138.,-127.5,1.55)); +#326699 = DIRECTION('',(-0.,0.,-1.)); +#326700 = DIRECTION('',(-0.,-1.,0.)); +#326701 = PLANE('',#326702); +#326702 = AXIS2_PLACEMENT_3D('',#326703,#326704,#326705); +#326703 = CARTESIAN_POINT('',(0.,0.,1.55)); +#326704 = DIRECTION('',(0.,0.,1.)); +#326705 = DIRECTION('',(1.,0.,-0.)); +#326706 = ADVANCED_FACE('',(#326707),#326718,.F.); +#326707 = FACE_BOUND('',#326708,.T.); +#326708 = EDGE_LOOP('',(#326709,#326710,#326716,#326717)); +#326709 = ORIENTED_EDGE('',*,*,#326673,.T.); +#326710 = ORIENTED_EDGE('',*,*,#326711,.T.); +#326711 = EDGE_CURVE('',#326674,#326694,#326712,.T.); +#326712 = LINE('',#326713,#326714); +#326713 = CARTESIAN_POINT('',(138.,-127.935,-4.6E-02)); +#326714 = VECTOR('',#326715,1.); +#326715 = DIRECTION('',(0.,0.,1.)); +#326716 = ORIENTED_EDGE('',*,*,#326693,.F.); +#326717 = ORIENTED_EDGE('',*,*,#326711,.F.); +#326718 = CYLINDRICAL_SURFACE('',#326719,0.435); +#326719 = AXIS2_PLACEMENT_3D('',#326720,#326721,#326722); +#326720 = CARTESIAN_POINT('',(138.,-127.5,-4.6E-02)); +#326721 = DIRECTION('',(-0.,-0.,-1.)); +#326722 = DIRECTION('',(-0.,-1.,0.)); +#326723 = MANIFOLD_SOLID_BREP('',#326724); +#326724 = CLOSED_SHELL('',(#326725,#326758,#326778,#326798)); +#326725 = ADVANCED_FACE('',(#326726),#326753,.T.); +#326726 = FACE_BOUND('',#326727,.T.); +#326727 = EDGE_LOOP('',(#326728,#326738,#326745,#326746)); +#326728 = ORIENTED_EDGE('',*,*,#326729,.T.); +#326729 = EDGE_CURVE('',#326730,#326732,#326734,.T.); +#326730 = VERTEX_POINT('',#326731); +#326731 = CARTESIAN_POINT('',(138.7155,-127.5,0.)); +#326732 = VERTEX_POINT('',#326733); +#326733 = CARTESIAN_POINT('',(138.7155,-127.5,-4.E-02)); +#326734 = LINE('',#326735,#326736); +#326735 = CARTESIAN_POINT('',(138.7155,-127.5,0.)); +#326736 = VECTOR('',#326737,1.); +#326737 = DIRECTION('',(0.,0.,-1.)); +#326738 = ORIENTED_EDGE('',*,*,#326739,.T.); +#326739 = EDGE_CURVE('',#326732,#326732,#326740,.T.); +#326740 = CIRCLE('',#326741,0.7155); +#326741 = AXIS2_PLACEMENT_3D('',#326742,#326743,#326744); +#326742 = CARTESIAN_POINT('',(138.,-127.5,-4.E-02)); +#326743 = DIRECTION('',(0.,0.,1.)); +#326744 = DIRECTION('',(1.,0.,-0.)); +#326745 = ORIENTED_EDGE('',*,*,#326729,.F.); +#326746 = ORIENTED_EDGE('',*,*,#326747,.F.); +#326747 = EDGE_CURVE('',#326730,#326730,#326748,.T.); +#326748 = CIRCLE('',#326749,0.7155); +#326749 = AXIS2_PLACEMENT_3D('',#326750,#326751,#326752); +#326750 = CARTESIAN_POINT('',(138.,-127.5,0.)); +#326751 = DIRECTION('',(0.,0.,1.)); +#326752 = DIRECTION('',(1.,0.,-0.)); +#326753 = CYLINDRICAL_SURFACE('',#326754,0.7155); +#326754 = AXIS2_PLACEMENT_3D('',#326755,#326756,#326757); +#326755 = CARTESIAN_POINT('',(138.,-127.5,0.)); +#326756 = DIRECTION('',(0.,0.,1.)); +#326757 = DIRECTION('',(1.,0.,-0.)); +#326758 = ADVANCED_FACE('',(#326759,#326762),#326773,.F.); +#326759 = FACE_BOUND('',#326760,.F.); +#326760 = EDGE_LOOP('',(#326761)); +#326761 = ORIENTED_EDGE('',*,*,#326747,.F.); +#326762 = FACE_BOUND('',#326763,.F.); +#326763 = EDGE_LOOP('',(#326764)); +#326764 = ORIENTED_EDGE('',*,*,#326765,.F.); +#326765 = EDGE_CURVE('',#326766,#326766,#326768,.T.); +#326766 = VERTEX_POINT('',#326767); +#326767 = CARTESIAN_POINT('',(138.,-127.935,0.)); +#326768 = CIRCLE('',#326769,0.435); +#326769 = AXIS2_PLACEMENT_3D('',#326770,#326771,#326772); +#326770 = CARTESIAN_POINT('',(138.,-127.5,0.)); +#326771 = DIRECTION('',(-0.,0.,-1.)); +#326772 = DIRECTION('',(-0.,-1.,0.)); +#326773 = PLANE('',#326774); +#326774 = AXIS2_PLACEMENT_3D('',#326775,#326776,#326777); +#326775 = CARTESIAN_POINT('',(0.,0.,0.)); +#326776 = DIRECTION('',(-0.,-0.,-1.)); +#326777 = DIRECTION('',(-1.,0.,0.)); +#326778 = ADVANCED_FACE('',(#326779,#326782),#326793,.T.); +#326779 = FACE_BOUND('',#326780,.T.); +#326780 = EDGE_LOOP('',(#326781)); +#326781 = ORIENTED_EDGE('',*,*,#326739,.F.); +#326782 = FACE_BOUND('',#326783,.T.); +#326783 = EDGE_LOOP('',(#326784)); +#326784 = ORIENTED_EDGE('',*,*,#326785,.F.); +#326785 = EDGE_CURVE('',#326786,#326786,#326788,.T.); +#326786 = VERTEX_POINT('',#326787); +#326787 = CARTESIAN_POINT('',(138.,-127.935,-4.E-02)); +#326788 = CIRCLE('',#326789,0.435); +#326789 = AXIS2_PLACEMENT_3D('',#326790,#326791,#326792); +#326790 = CARTESIAN_POINT('',(138.,-127.5,-4.E-02)); +#326791 = DIRECTION('',(-0.,0.,-1.)); +#326792 = DIRECTION('',(-0.,-1.,0.)); +#326793 = PLANE('',#326794); +#326794 = AXIS2_PLACEMENT_3D('',#326795,#326796,#326797); +#326795 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#326796 = DIRECTION('',(-0.,-0.,-1.)); +#326797 = DIRECTION('',(-1.,0.,0.)); +#326798 = ADVANCED_FACE('',(#326799),#326810,.F.); +#326799 = FACE_BOUND('',#326800,.T.); +#326800 = EDGE_LOOP('',(#326801,#326802,#326808,#326809)); +#326801 = ORIENTED_EDGE('',*,*,#326785,.T.); +#326802 = ORIENTED_EDGE('',*,*,#326803,.T.); +#326803 = EDGE_CURVE('',#326786,#326766,#326804,.T.); +#326804 = LINE('',#326805,#326806); +#326805 = CARTESIAN_POINT('',(138.,-127.935,-4.6E-02)); +#326806 = VECTOR('',#326807,1.); +#326807 = DIRECTION('',(0.,0.,1.)); +#326808 = ORIENTED_EDGE('',*,*,#326765,.F.); +#326809 = ORIENTED_EDGE('',*,*,#326803,.F.); +#326810 = CYLINDRICAL_SURFACE('',#326811,0.435); +#326811 = AXIS2_PLACEMENT_3D('',#326812,#326813,#326814); +#326812 = CARTESIAN_POINT('',(138.,-127.5,-4.6E-02)); +#326813 = DIRECTION('',(-0.,-0.,-1.)); +#326814 = DIRECTION('',(-0.,-1.,0.)); +#326815 = MANIFOLD_SOLID_BREP('',#326816); +#326816 = CLOSED_SHELL('',(#326817,#326850,#326870,#326890)); +#326817 = ADVANCED_FACE('',(#326818),#326845,.T.); +#326818 = FACE_BOUND('',#326819,.F.); +#326819 = EDGE_LOOP('',(#326820,#326830,#326837,#326838)); +#326820 = ORIENTED_EDGE('',*,*,#326821,.T.); +#326821 = EDGE_CURVE('',#326822,#326824,#326826,.T.); +#326822 = VERTEX_POINT('',#326823); +#326823 = CARTESIAN_POINT('',(138.,-127.96,-4.E-02)); +#326824 = VERTEX_POINT('',#326825); +#326825 = CARTESIAN_POINT('',(138.,-127.96,1.55)); +#326826 = LINE('',#326827,#326828); +#326827 = CARTESIAN_POINT('',(138.,-127.96,-4.E-02)); +#326828 = VECTOR('',#326829,1.); +#326829 = DIRECTION('',(0.,0.,1.)); +#326830 = ORIENTED_EDGE('',*,*,#326831,.T.); +#326831 = EDGE_CURVE('',#326824,#326824,#326832,.T.); +#326832 = CIRCLE('',#326833,0.46); +#326833 = AXIS2_PLACEMENT_3D('',#326834,#326835,#326836); +#326834 = CARTESIAN_POINT('',(138.,-127.5,1.55)); +#326835 = DIRECTION('',(0.,0.,1.)); +#326836 = DIRECTION('',(-0.,-1.,0.)); +#326837 = ORIENTED_EDGE('',*,*,#326821,.F.); +#326838 = ORIENTED_EDGE('',*,*,#326839,.F.); +#326839 = EDGE_CURVE('',#326822,#326822,#326840,.T.); +#326840 = CIRCLE('',#326841,0.46); +#326841 = AXIS2_PLACEMENT_3D('',#326842,#326843,#326844); +#326842 = CARTESIAN_POINT('',(138.,-127.5,-4.E-02)); +#326843 = DIRECTION('',(0.,0.,1.)); +#326844 = DIRECTION('',(-0.,-1.,0.)); +#326845 = CYLINDRICAL_SURFACE('',#326846,0.46); +#326846 = AXIS2_PLACEMENT_3D('',#326847,#326848,#326849); +#326847 = CARTESIAN_POINT('',(138.,-127.5,-4.E-02)); +#326848 = DIRECTION('',(-0.,-0.,-1.)); +#326849 = DIRECTION('',(-0.,-1.,0.)); +#326850 = ADVANCED_FACE('',(#326851,#326854),#326865,.F.); +#326851 = FACE_BOUND('',#326852,.F.); +#326852 = EDGE_LOOP('',(#326853)); +#326853 = ORIENTED_EDGE('',*,*,#326839,.T.); +#326854 = FACE_BOUND('',#326855,.F.); +#326855 = EDGE_LOOP('',(#326856)); +#326856 = ORIENTED_EDGE('',*,*,#326857,.T.); +#326857 = EDGE_CURVE('',#326858,#326858,#326860,.T.); +#326858 = VERTEX_POINT('',#326859); +#326859 = CARTESIAN_POINT('',(138.,-127.935,-4.E-02)); +#326860 = CIRCLE('',#326861,0.435); +#326861 = AXIS2_PLACEMENT_3D('',#326862,#326863,#326864); +#326862 = CARTESIAN_POINT('',(138.,-127.5,-4.E-02)); +#326863 = DIRECTION('',(-0.,0.,-1.)); +#326864 = DIRECTION('',(-0.,-1.,0.)); +#326865 = PLANE('',#326866); +#326866 = AXIS2_PLACEMENT_3D('',#326867,#326868,#326869); +#326867 = CARTESIAN_POINT('',(138.,-127.96,-4.E-02)); +#326868 = DIRECTION('',(0.,0.,1.)); +#326869 = DIRECTION('',(1.,0.,-0.)); +#326870 = ADVANCED_FACE('',(#326871,#326874),#326885,.T.); +#326871 = FACE_BOUND('',#326872,.T.); +#326872 = EDGE_LOOP('',(#326873)); +#326873 = ORIENTED_EDGE('',*,*,#326831,.T.); +#326874 = FACE_BOUND('',#326875,.T.); +#326875 = EDGE_LOOP('',(#326876)); +#326876 = ORIENTED_EDGE('',*,*,#326877,.T.); +#326877 = EDGE_CURVE('',#326878,#326878,#326880,.T.); +#326878 = VERTEX_POINT('',#326879); +#326879 = CARTESIAN_POINT('',(138.,-127.935,1.55)); +#326880 = CIRCLE('',#326881,0.435); +#326881 = AXIS2_PLACEMENT_3D('',#326882,#326883,#326884); +#326882 = CARTESIAN_POINT('',(138.,-127.5,1.55)); +#326883 = DIRECTION('',(-0.,0.,-1.)); +#326884 = DIRECTION('',(-0.,-1.,0.)); +#326885 = PLANE('',#326886); +#326886 = AXIS2_PLACEMENT_3D('',#326887,#326888,#326889); +#326887 = CARTESIAN_POINT('',(138.,-127.96,1.55)); +#326888 = DIRECTION('',(0.,0.,1.)); +#326889 = DIRECTION('',(1.,0.,-0.)); +#326890 = ADVANCED_FACE('',(#326891),#326902,.F.); +#326891 = FACE_BOUND('',#326892,.T.); +#326892 = EDGE_LOOP('',(#326893,#326894,#326900,#326901)); +#326893 = ORIENTED_EDGE('',*,*,#326857,.T.); +#326894 = ORIENTED_EDGE('',*,*,#326895,.T.); +#326895 = EDGE_CURVE('',#326858,#326878,#326896,.T.); +#326896 = LINE('',#326897,#326898); +#326897 = CARTESIAN_POINT('',(138.,-127.935,-4.6E-02)); +#326898 = VECTOR('',#326899,1.); +#326899 = DIRECTION('',(0.,0.,1.)); +#326900 = ORIENTED_EDGE('',*,*,#326877,.F.); +#326901 = ORIENTED_EDGE('',*,*,#326895,.F.); +#326902 = CYLINDRICAL_SURFACE('',#326903,0.435); +#326903 = AXIS2_PLACEMENT_3D('',#326904,#326905,#326906); +#326904 = CARTESIAN_POINT('',(138.,-127.5,-4.6E-02)); +#326905 = DIRECTION('',(-0.,-0.,-1.)); +#326906 = DIRECTION('',(-0.,-1.,0.)); +#326907 = MANIFOLD_SOLID_BREP('',#326908); +#326908 = CLOSED_SHELL('',(#326909,#326942,#326962,#326982)); +#326909 = ADVANCED_FACE('',(#326910),#326937,.T.); +#326910 = FACE_BOUND('',#326911,.F.); +#326911 = EDGE_LOOP('',(#326912,#326922,#326929,#326930)); +#326912 = ORIENTED_EDGE('',*,*,#326913,.T.); +#326913 = EDGE_CURVE('',#326914,#326916,#326918,.T.); +#326914 = VERTEX_POINT('',#326915); +#326915 = CARTESIAN_POINT('',(132.7155,-127.5,1.51)); +#326916 = VERTEX_POINT('',#326917); +#326917 = CARTESIAN_POINT('',(132.7155,-127.5,1.55)); +#326918 = LINE('',#326919,#326920); +#326919 = CARTESIAN_POINT('',(132.7155,-127.5,1.51)); +#326920 = VECTOR('',#326921,1.); +#326921 = DIRECTION('',(0.,0.,1.)); +#326922 = ORIENTED_EDGE('',*,*,#326923,.T.); +#326923 = EDGE_CURVE('',#326916,#326916,#326924,.T.); +#326924 = CIRCLE('',#326925,0.7155); +#326925 = AXIS2_PLACEMENT_3D('',#326926,#326927,#326928); +#326926 = CARTESIAN_POINT('',(132.,-127.5,1.55)); +#326927 = DIRECTION('',(0.,0.,1.)); +#326928 = DIRECTION('',(1.,0.,-0.)); +#326929 = ORIENTED_EDGE('',*,*,#326913,.F.); +#326930 = ORIENTED_EDGE('',*,*,#326931,.F.); +#326931 = EDGE_CURVE('',#326914,#326914,#326932,.T.); +#326932 = CIRCLE('',#326933,0.7155); +#326933 = AXIS2_PLACEMENT_3D('',#326934,#326935,#326936); +#326934 = CARTESIAN_POINT('',(132.,-127.5,1.51)); +#326935 = DIRECTION('',(0.,0.,1.)); +#326936 = DIRECTION('',(1.,0.,-0.)); +#326937 = CYLINDRICAL_SURFACE('',#326938,0.7155); +#326938 = AXIS2_PLACEMENT_3D('',#326939,#326940,#326941); +#326939 = CARTESIAN_POINT('',(132.,-127.5,1.51)); +#326940 = DIRECTION('',(-0.,-0.,-1.)); +#326941 = DIRECTION('',(1.,0.,-0.)); +#326942 = ADVANCED_FACE('',(#326943,#326946),#326957,.F.); +#326943 = FACE_BOUND('',#326944,.F.); +#326944 = EDGE_LOOP('',(#326945)); +#326945 = ORIENTED_EDGE('',*,*,#326931,.T.); +#326946 = FACE_BOUND('',#326947,.F.); +#326947 = EDGE_LOOP('',(#326948)); +#326948 = ORIENTED_EDGE('',*,*,#326949,.T.); +#326949 = EDGE_CURVE('',#326950,#326950,#326952,.T.); +#326950 = VERTEX_POINT('',#326951); +#326951 = CARTESIAN_POINT('',(132.,-127.935,1.51)); +#326952 = CIRCLE('',#326953,0.435); +#326953 = AXIS2_PLACEMENT_3D('',#326954,#326955,#326956); +#326954 = CARTESIAN_POINT('',(132.,-127.5,1.51)); +#326955 = DIRECTION('',(-0.,0.,-1.)); +#326956 = DIRECTION('',(-0.,-1.,0.)); +#326957 = PLANE('',#326958); +#326958 = AXIS2_PLACEMENT_3D('',#326959,#326960,#326961); +#326959 = CARTESIAN_POINT('',(0.,0.,1.51)); +#326960 = DIRECTION('',(0.,0.,1.)); +#326961 = DIRECTION('',(1.,0.,-0.)); +#326962 = ADVANCED_FACE('',(#326963,#326966),#326977,.T.); +#326963 = FACE_BOUND('',#326964,.T.); +#326964 = EDGE_LOOP('',(#326965)); +#326965 = ORIENTED_EDGE('',*,*,#326923,.T.); +#326966 = FACE_BOUND('',#326967,.T.); +#326967 = EDGE_LOOP('',(#326968)); +#326968 = ORIENTED_EDGE('',*,*,#326969,.T.); +#326969 = EDGE_CURVE('',#326970,#326970,#326972,.T.); +#326970 = VERTEX_POINT('',#326971); +#326971 = CARTESIAN_POINT('',(132.,-127.935,1.55)); +#326972 = CIRCLE('',#326973,0.435); +#326973 = AXIS2_PLACEMENT_3D('',#326974,#326975,#326976); +#326974 = CARTESIAN_POINT('',(132.,-127.5,1.55)); +#326975 = DIRECTION('',(-0.,0.,-1.)); +#326976 = DIRECTION('',(-0.,-1.,0.)); +#326977 = PLANE('',#326978); +#326978 = AXIS2_PLACEMENT_3D('',#326979,#326980,#326981); +#326979 = CARTESIAN_POINT('',(0.,0.,1.55)); +#326980 = DIRECTION('',(0.,0.,1.)); +#326981 = DIRECTION('',(1.,0.,-0.)); +#326982 = ADVANCED_FACE('',(#326983),#326994,.F.); +#326983 = FACE_BOUND('',#326984,.T.); +#326984 = EDGE_LOOP('',(#326985,#326986,#326992,#326993)); +#326985 = ORIENTED_EDGE('',*,*,#326949,.T.); +#326986 = ORIENTED_EDGE('',*,*,#326987,.T.); +#326987 = EDGE_CURVE('',#326950,#326970,#326988,.T.); +#326988 = LINE('',#326989,#326990); +#326989 = CARTESIAN_POINT('',(132.,-127.935,-4.6E-02)); +#326990 = VECTOR('',#326991,1.); +#326991 = DIRECTION('',(0.,0.,1.)); +#326992 = ORIENTED_EDGE('',*,*,#326969,.F.); +#326993 = ORIENTED_EDGE('',*,*,#326987,.F.); +#326994 = CYLINDRICAL_SURFACE('',#326995,0.435); +#326995 = AXIS2_PLACEMENT_3D('',#326996,#326997,#326998); +#326996 = CARTESIAN_POINT('',(132.,-127.5,-4.6E-02)); +#326997 = DIRECTION('',(-0.,-0.,-1.)); +#326998 = DIRECTION('',(-0.,-1.,0.)); +#326999 = MANIFOLD_SOLID_BREP('',#327000); +#327000 = CLOSED_SHELL('',(#327001,#327034,#327054,#327074)); +#327001 = ADVANCED_FACE('',(#327002),#327029,.T.); +#327002 = FACE_BOUND('',#327003,.T.); +#327003 = EDGE_LOOP('',(#327004,#327014,#327021,#327022)); +#327004 = ORIENTED_EDGE('',*,*,#327005,.T.); +#327005 = EDGE_CURVE('',#327006,#327008,#327010,.T.); +#327006 = VERTEX_POINT('',#327007); +#327007 = CARTESIAN_POINT('',(132.7155,-127.5,0.)); +#327008 = VERTEX_POINT('',#327009); +#327009 = CARTESIAN_POINT('',(132.7155,-127.5,-4.E-02)); +#327010 = LINE('',#327011,#327012); +#327011 = CARTESIAN_POINT('',(132.7155,-127.5,0.)); +#327012 = VECTOR('',#327013,1.); +#327013 = DIRECTION('',(0.,0.,-1.)); +#327014 = ORIENTED_EDGE('',*,*,#327015,.T.); +#327015 = EDGE_CURVE('',#327008,#327008,#327016,.T.); +#327016 = CIRCLE('',#327017,0.7155); +#327017 = AXIS2_PLACEMENT_3D('',#327018,#327019,#327020); +#327018 = CARTESIAN_POINT('',(132.,-127.5,-4.E-02)); +#327019 = DIRECTION('',(0.,0.,1.)); +#327020 = DIRECTION('',(1.,0.,-0.)); +#327021 = ORIENTED_EDGE('',*,*,#327005,.F.); +#327022 = ORIENTED_EDGE('',*,*,#327023,.F.); +#327023 = EDGE_CURVE('',#327006,#327006,#327024,.T.); +#327024 = CIRCLE('',#327025,0.7155); +#327025 = AXIS2_PLACEMENT_3D('',#327026,#327027,#327028); +#327026 = CARTESIAN_POINT('',(132.,-127.5,0.)); +#327027 = DIRECTION('',(0.,0.,1.)); +#327028 = DIRECTION('',(1.,0.,-0.)); +#327029 = CYLINDRICAL_SURFACE('',#327030,0.7155); +#327030 = AXIS2_PLACEMENT_3D('',#327031,#327032,#327033); +#327031 = CARTESIAN_POINT('',(132.,-127.5,0.)); +#327032 = DIRECTION('',(0.,0.,1.)); +#327033 = DIRECTION('',(1.,0.,-0.)); +#327034 = ADVANCED_FACE('',(#327035,#327038),#327049,.F.); +#327035 = FACE_BOUND('',#327036,.F.); +#327036 = EDGE_LOOP('',(#327037)); +#327037 = ORIENTED_EDGE('',*,*,#327023,.F.); +#327038 = FACE_BOUND('',#327039,.F.); +#327039 = EDGE_LOOP('',(#327040)); +#327040 = ORIENTED_EDGE('',*,*,#327041,.F.); +#327041 = EDGE_CURVE('',#327042,#327042,#327044,.T.); +#327042 = VERTEX_POINT('',#327043); +#327043 = CARTESIAN_POINT('',(132.,-127.935,0.)); +#327044 = CIRCLE('',#327045,0.435); +#327045 = AXIS2_PLACEMENT_3D('',#327046,#327047,#327048); +#327046 = CARTESIAN_POINT('',(132.,-127.5,0.)); +#327047 = DIRECTION('',(-0.,0.,-1.)); +#327048 = DIRECTION('',(-0.,-1.,0.)); +#327049 = PLANE('',#327050); +#327050 = AXIS2_PLACEMENT_3D('',#327051,#327052,#327053); +#327051 = CARTESIAN_POINT('',(0.,0.,0.)); +#327052 = DIRECTION('',(-0.,-0.,-1.)); +#327053 = DIRECTION('',(-1.,0.,0.)); +#327054 = ADVANCED_FACE('',(#327055,#327058),#327069,.T.); +#327055 = FACE_BOUND('',#327056,.T.); +#327056 = EDGE_LOOP('',(#327057)); +#327057 = ORIENTED_EDGE('',*,*,#327015,.F.); +#327058 = FACE_BOUND('',#327059,.T.); +#327059 = EDGE_LOOP('',(#327060)); +#327060 = ORIENTED_EDGE('',*,*,#327061,.F.); +#327061 = EDGE_CURVE('',#327062,#327062,#327064,.T.); +#327062 = VERTEX_POINT('',#327063); +#327063 = CARTESIAN_POINT('',(132.,-127.935,-4.E-02)); +#327064 = CIRCLE('',#327065,0.435); +#327065 = AXIS2_PLACEMENT_3D('',#327066,#327067,#327068); +#327066 = CARTESIAN_POINT('',(132.,-127.5,-4.E-02)); +#327067 = DIRECTION('',(-0.,0.,-1.)); +#327068 = DIRECTION('',(-0.,-1.,0.)); +#327069 = PLANE('',#327070); +#327070 = AXIS2_PLACEMENT_3D('',#327071,#327072,#327073); +#327071 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#327072 = DIRECTION('',(-0.,-0.,-1.)); +#327073 = DIRECTION('',(-1.,0.,0.)); +#327074 = ADVANCED_FACE('',(#327075),#327086,.F.); +#327075 = FACE_BOUND('',#327076,.T.); +#327076 = EDGE_LOOP('',(#327077,#327078,#327084,#327085)); +#327077 = ORIENTED_EDGE('',*,*,#327061,.T.); +#327078 = ORIENTED_EDGE('',*,*,#327079,.T.); +#327079 = EDGE_CURVE('',#327062,#327042,#327080,.T.); +#327080 = LINE('',#327081,#327082); +#327081 = CARTESIAN_POINT('',(132.,-127.935,-4.6E-02)); +#327082 = VECTOR('',#327083,1.); +#327083 = DIRECTION('',(0.,0.,1.)); +#327084 = ORIENTED_EDGE('',*,*,#327041,.F.); +#327085 = ORIENTED_EDGE('',*,*,#327079,.F.); +#327086 = CYLINDRICAL_SURFACE('',#327087,0.435); +#327087 = AXIS2_PLACEMENT_3D('',#327088,#327089,#327090); +#327088 = CARTESIAN_POINT('',(132.,-127.5,-4.6E-02)); +#327089 = DIRECTION('',(-0.,-0.,-1.)); +#327090 = DIRECTION('',(-0.,-1.,0.)); +#327091 = MANIFOLD_SOLID_BREP('',#327092); +#327092 = CLOSED_SHELL('',(#327093,#327126,#327146,#327166)); +#327093 = ADVANCED_FACE('',(#327094),#327121,.T.); +#327094 = FACE_BOUND('',#327095,.F.); +#327095 = EDGE_LOOP('',(#327096,#327106,#327113,#327114)); +#327096 = ORIENTED_EDGE('',*,*,#327097,.T.); +#327097 = EDGE_CURVE('',#327098,#327100,#327102,.T.); +#327098 = VERTEX_POINT('',#327099); +#327099 = CARTESIAN_POINT('',(132.,-127.96,-4.E-02)); +#327100 = VERTEX_POINT('',#327101); +#327101 = CARTESIAN_POINT('',(132.,-127.96,1.55)); +#327102 = LINE('',#327103,#327104); +#327103 = CARTESIAN_POINT('',(132.,-127.96,-4.E-02)); +#327104 = VECTOR('',#327105,1.); +#327105 = DIRECTION('',(0.,0.,1.)); +#327106 = ORIENTED_EDGE('',*,*,#327107,.T.); +#327107 = EDGE_CURVE('',#327100,#327100,#327108,.T.); +#327108 = CIRCLE('',#327109,0.46); +#327109 = AXIS2_PLACEMENT_3D('',#327110,#327111,#327112); +#327110 = CARTESIAN_POINT('',(132.,-127.5,1.55)); +#327111 = DIRECTION('',(0.,0.,1.)); +#327112 = DIRECTION('',(-0.,-1.,0.)); +#327113 = ORIENTED_EDGE('',*,*,#327097,.F.); +#327114 = ORIENTED_EDGE('',*,*,#327115,.F.); +#327115 = EDGE_CURVE('',#327098,#327098,#327116,.T.); +#327116 = CIRCLE('',#327117,0.46); +#327117 = AXIS2_PLACEMENT_3D('',#327118,#327119,#327120); +#327118 = CARTESIAN_POINT('',(132.,-127.5,-4.E-02)); +#327119 = DIRECTION('',(0.,0.,1.)); +#327120 = DIRECTION('',(-0.,-1.,0.)); +#327121 = CYLINDRICAL_SURFACE('',#327122,0.46); +#327122 = AXIS2_PLACEMENT_3D('',#327123,#327124,#327125); +#327123 = CARTESIAN_POINT('',(132.,-127.5,-4.E-02)); +#327124 = DIRECTION('',(-0.,-0.,-1.)); +#327125 = DIRECTION('',(-0.,-1.,0.)); +#327126 = ADVANCED_FACE('',(#327127,#327130),#327141,.F.); +#327127 = FACE_BOUND('',#327128,.F.); +#327128 = EDGE_LOOP('',(#327129)); +#327129 = ORIENTED_EDGE('',*,*,#327115,.T.); +#327130 = FACE_BOUND('',#327131,.F.); +#327131 = EDGE_LOOP('',(#327132)); +#327132 = ORIENTED_EDGE('',*,*,#327133,.T.); +#327133 = EDGE_CURVE('',#327134,#327134,#327136,.T.); +#327134 = VERTEX_POINT('',#327135); +#327135 = CARTESIAN_POINT('',(132.,-127.935,-4.E-02)); +#327136 = CIRCLE('',#327137,0.435); +#327137 = AXIS2_PLACEMENT_3D('',#327138,#327139,#327140); +#327138 = CARTESIAN_POINT('',(132.,-127.5,-4.E-02)); +#327139 = DIRECTION('',(-0.,0.,-1.)); +#327140 = DIRECTION('',(-0.,-1.,0.)); +#327141 = PLANE('',#327142); +#327142 = AXIS2_PLACEMENT_3D('',#327143,#327144,#327145); +#327143 = CARTESIAN_POINT('',(132.,-127.96,-4.E-02)); +#327144 = DIRECTION('',(0.,0.,1.)); +#327145 = DIRECTION('',(1.,0.,-0.)); +#327146 = ADVANCED_FACE('',(#327147,#327150),#327161,.T.); +#327147 = FACE_BOUND('',#327148,.T.); +#327148 = EDGE_LOOP('',(#327149)); +#327149 = ORIENTED_EDGE('',*,*,#327107,.T.); +#327150 = FACE_BOUND('',#327151,.T.); +#327151 = EDGE_LOOP('',(#327152)); +#327152 = ORIENTED_EDGE('',*,*,#327153,.T.); +#327153 = EDGE_CURVE('',#327154,#327154,#327156,.T.); +#327154 = VERTEX_POINT('',#327155); +#327155 = CARTESIAN_POINT('',(132.,-127.935,1.55)); +#327156 = CIRCLE('',#327157,0.435); +#327157 = AXIS2_PLACEMENT_3D('',#327158,#327159,#327160); +#327158 = CARTESIAN_POINT('',(132.,-127.5,1.55)); +#327159 = DIRECTION('',(-0.,0.,-1.)); +#327160 = DIRECTION('',(-0.,-1.,0.)); +#327161 = PLANE('',#327162); +#327162 = AXIS2_PLACEMENT_3D('',#327163,#327164,#327165); +#327163 = CARTESIAN_POINT('',(132.,-127.96,1.55)); +#327164 = DIRECTION('',(0.,0.,1.)); +#327165 = DIRECTION('',(1.,0.,-0.)); +#327166 = ADVANCED_FACE('',(#327167),#327178,.F.); +#327167 = FACE_BOUND('',#327168,.T.); +#327168 = EDGE_LOOP('',(#327169,#327170,#327176,#327177)); +#327169 = ORIENTED_EDGE('',*,*,#327133,.T.); +#327170 = ORIENTED_EDGE('',*,*,#327171,.T.); +#327171 = EDGE_CURVE('',#327134,#327154,#327172,.T.); +#327172 = LINE('',#327173,#327174); +#327173 = CARTESIAN_POINT('',(132.,-127.935,-4.6E-02)); +#327174 = VECTOR('',#327175,1.); +#327175 = DIRECTION('',(0.,0.,1.)); +#327176 = ORIENTED_EDGE('',*,*,#327153,.F.); +#327177 = ORIENTED_EDGE('',*,*,#327171,.F.); +#327178 = CYLINDRICAL_SURFACE('',#327179,0.435); +#327179 = AXIS2_PLACEMENT_3D('',#327180,#327181,#327182); +#327180 = CARTESIAN_POINT('',(132.,-127.5,-4.6E-02)); +#327181 = DIRECTION('',(-0.,-0.,-1.)); +#327182 = DIRECTION('',(-0.,-1.,0.)); +#327183 = MANIFOLD_SOLID_BREP('',#327184); +#327184 = CLOSED_SHELL('',(#327185,#327218,#327238,#327258)); +#327185 = ADVANCED_FACE('',(#327186),#327213,.T.); +#327186 = FACE_BOUND('',#327187,.F.); +#327187 = EDGE_LOOP('',(#327188,#327198,#327205,#327206)); +#327188 = ORIENTED_EDGE('',*,*,#327189,.T.); +#327189 = EDGE_CURVE('',#327190,#327192,#327194,.T.); +#327190 = VERTEX_POINT('',#327191); +#327191 = CARTESIAN_POINT('',(130.7155,-127.5,1.51)); +#327192 = VERTEX_POINT('',#327193); +#327193 = CARTESIAN_POINT('',(130.7155,-127.5,1.55)); +#327194 = LINE('',#327195,#327196); +#327195 = CARTESIAN_POINT('',(130.7155,-127.5,1.51)); +#327196 = VECTOR('',#327197,1.); +#327197 = DIRECTION('',(0.,0.,1.)); +#327198 = ORIENTED_EDGE('',*,*,#327199,.T.); +#327199 = EDGE_CURVE('',#327192,#327192,#327200,.T.); +#327200 = CIRCLE('',#327201,0.7155); +#327201 = AXIS2_PLACEMENT_3D('',#327202,#327203,#327204); +#327202 = CARTESIAN_POINT('',(130.,-127.5,1.55)); +#327203 = DIRECTION('',(0.,0.,1.)); +#327204 = DIRECTION('',(1.,0.,-0.)); +#327205 = ORIENTED_EDGE('',*,*,#327189,.F.); +#327206 = ORIENTED_EDGE('',*,*,#327207,.F.); +#327207 = EDGE_CURVE('',#327190,#327190,#327208,.T.); +#327208 = CIRCLE('',#327209,0.7155); +#327209 = AXIS2_PLACEMENT_3D('',#327210,#327211,#327212); +#327210 = CARTESIAN_POINT('',(130.,-127.5,1.51)); +#327211 = DIRECTION('',(0.,0.,1.)); +#327212 = DIRECTION('',(1.,0.,-0.)); +#327213 = CYLINDRICAL_SURFACE('',#327214,0.7155); +#327214 = AXIS2_PLACEMENT_3D('',#327215,#327216,#327217); +#327215 = CARTESIAN_POINT('',(130.,-127.5,1.51)); +#327216 = DIRECTION('',(-0.,-0.,-1.)); +#327217 = DIRECTION('',(1.,0.,-0.)); +#327218 = ADVANCED_FACE('',(#327219,#327222),#327233,.F.); +#327219 = FACE_BOUND('',#327220,.F.); +#327220 = EDGE_LOOP('',(#327221)); +#327221 = ORIENTED_EDGE('',*,*,#327207,.T.); +#327222 = FACE_BOUND('',#327223,.F.); +#327223 = EDGE_LOOP('',(#327224)); +#327224 = ORIENTED_EDGE('',*,*,#327225,.T.); +#327225 = EDGE_CURVE('',#327226,#327226,#327228,.T.); +#327226 = VERTEX_POINT('',#327227); +#327227 = CARTESIAN_POINT('',(130.,-127.935,1.51)); +#327228 = CIRCLE('',#327229,0.435); +#327229 = AXIS2_PLACEMENT_3D('',#327230,#327231,#327232); +#327230 = CARTESIAN_POINT('',(130.,-127.5,1.51)); +#327231 = DIRECTION('',(-0.,0.,-1.)); +#327232 = DIRECTION('',(-0.,-1.,0.)); +#327233 = PLANE('',#327234); +#327234 = AXIS2_PLACEMENT_3D('',#327235,#327236,#327237); +#327235 = CARTESIAN_POINT('',(0.,0.,1.51)); +#327236 = DIRECTION('',(0.,0.,1.)); +#327237 = DIRECTION('',(1.,0.,-0.)); +#327238 = ADVANCED_FACE('',(#327239,#327242),#327253,.T.); +#327239 = FACE_BOUND('',#327240,.T.); +#327240 = EDGE_LOOP('',(#327241)); +#327241 = ORIENTED_EDGE('',*,*,#327199,.T.); +#327242 = FACE_BOUND('',#327243,.T.); +#327243 = EDGE_LOOP('',(#327244)); +#327244 = ORIENTED_EDGE('',*,*,#327245,.T.); +#327245 = EDGE_CURVE('',#327246,#327246,#327248,.T.); +#327246 = VERTEX_POINT('',#327247); +#327247 = CARTESIAN_POINT('',(130.,-127.935,1.55)); +#327248 = CIRCLE('',#327249,0.435); +#327249 = AXIS2_PLACEMENT_3D('',#327250,#327251,#327252); +#327250 = CARTESIAN_POINT('',(130.,-127.5,1.55)); +#327251 = DIRECTION('',(-0.,0.,-1.)); +#327252 = DIRECTION('',(-0.,-1.,0.)); +#327253 = PLANE('',#327254); +#327254 = AXIS2_PLACEMENT_3D('',#327255,#327256,#327257); +#327255 = CARTESIAN_POINT('',(0.,0.,1.55)); +#327256 = DIRECTION('',(0.,0.,1.)); +#327257 = DIRECTION('',(1.,0.,-0.)); +#327258 = ADVANCED_FACE('',(#327259),#327270,.F.); +#327259 = FACE_BOUND('',#327260,.T.); +#327260 = EDGE_LOOP('',(#327261,#327262,#327268,#327269)); +#327261 = ORIENTED_EDGE('',*,*,#327225,.T.); +#327262 = ORIENTED_EDGE('',*,*,#327263,.T.); +#327263 = EDGE_CURVE('',#327226,#327246,#327264,.T.); +#327264 = LINE('',#327265,#327266); +#327265 = CARTESIAN_POINT('',(130.,-127.935,-4.6E-02)); +#327266 = VECTOR('',#327267,1.); +#327267 = DIRECTION('',(0.,0.,1.)); +#327268 = ORIENTED_EDGE('',*,*,#327245,.F.); +#327269 = ORIENTED_EDGE('',*,*,#327263,.F.); +#327270 = CYLINDRICAL_SURFACE('',#327271,0.435); +#327271 = AXIS2_PLACEMENT_3D('',#327272,#327273,#327274); +#327272 = CARTESIAN_POINT('',(130.,-127.5,-4.6E-02)); +#327273 = DIRECTION('',(-0.,-0.,-1.)); +#327274 = DIRECTION('',(-0.,-1.,0.)); +#327275 = MANIFOLD_SOLID_BREP('',#327276); +#327276 = CLOSED_SHELL('',(#327277,#327310,#327330,#327350)); +#327277 = ADVANCED_FACE('',(#327278),#327305,.T.); +#327278 = FACE_BOUND('',#327279,.T.); +#327279 = EDGE_LOOP('',(#327280,#327290,#327297,#327298)); +#327280 = ORIENTED_EDGE('',*,*,#327281,.T.); +#327281 = EDGE_CURVE('',#327282,#327284,#327286,.T.); +#327282 = VERTEX_POINT('',#327283); +#327283 = CARTESIAN_POINT('',(130.7155,-127.5,0.)); +#327284 = VERTEX_POINT('',#327285); +#327285 = CARTESIAN_POINT('',(130.7155,-127.5,-4.E-02)); +#327286 = LINE('',#327287,#327288); +#327287 = CARTESIAN_POINT('',(130.7155,-127.5,0.)); +#327288 = VECTOR('',#327289,1.); +#327289 = DIRECTION('',(0.,0.,-1.)); +#327290 = ORIENTED_EDGE('',*,*,#327291,.T.); +#327291 = EDGE_CURVE('',#327284,#327284,#327292,.T.); +#327292 = CIRCLE('',#327293,0.7155); +#327293 = AXIS2_PLACEMENT_3D('',#327294,#327295,#327296); +#327294 = CARTESIAN_POINT('',(130.,-127.5,-4.E-02)); +#327295 = DIRECTION('',(0.,0.,1.)); +#327296 = DIRECTION('',(1.,0.,-0.)); +#327297 = ORIENTED_EDGE('',*,*,#327281,.F.); +#327298 = ORIENTED_EDGE('',*,*,#327299,.F.); +#327299 = EDGE_CURVE('',#327282,#327282,#327300,.T.); +#327300 = CIRCLE('',#327301,0.7155); +#327301 = AXIS2_PLACEMENT_3D('',#327302,#327303,#327304); +#327302 = CARTESIAN_POINT('',(130.,-127.5,0.)); +#327303 = DIRECTION('',(0.,0.,1.)); +#327304 = DIRECTION('',(1.,0.,-0.)); +#327305 = CYLINDRICAL_SURFACE('',#327306,0.7155); +#327306 = AXIS2_PLACEMENT_3D('',#327307,#327308,#327309); +#327307 = CARTESIAN_POINT('',(130.,-127.5,0.)); +#327308 = DIRECTION('',(0.,0.,1.)); +#327309 = DIRECTION('',(1.,0.,-0.)); +#327310 = ADVANCED_FACE('',(#327311,#327314),#327325,.F.); +#327311 = FACE_BOUND('',#327312,.F.); +#327312 = EDGE_LOOP('',(#327313)); +#327313 = ORIENTED_EDGE('',*,*,#327299,.F.); +#327314 = FACE_BOUND('',#327315,.F.); +#327315 = EDGE_LOOP('',(#327316)); +#327316 = ORIENTED_EDGE('',*,*,#327317,.F.); +#327317 = EDGE_CURVE('',#327318,#327318,#327320,.T.); +#327318 = VERTEX_POINT('',#327319); +#327319 = CARTESIAN_POINT('',(130.,-127.935,0.)); +#327320 = CIRCLE('',#327321,0.435); +#327321 = AXIS2_PLACEMENT_3D('',#327322,#327323,#327324); +#327322 = CARTESIAN_POINT('',(130.,-127.5,0.)); +#327323 = DIRECTION('',(-0.,0.,-1.)); +#327324 = DIRECTION('',(-0.,-1.,0.)); +#327325 = PLANE('',#327326); +#327326 = AXIS2_PLACEMENT_3D('',#327327,#327328,#327329); +#327327 = CARTESIAN_POINT('',(0.,0.,0.)); +#327328 = DIRECTION('',(-0.,-0.,-1.)); +#327329 = DIRECTION('',(-1.,0.,0.)); +#327330 = ADVANCED_FACE('',(#327331,#327334),#327345,.T.); +#327331 = FACE_BOUND('',#327332,.T.); +#327332 = EDGE_LOOP('',(#327333)); +#327333 = ORIENTED_EDGE('',*,*,#327291,.F.); +#327334 = FACE_BOUND('',#327335,.T.); +#327335 = EDGE_LOOP('',(#327336)); +#327336 = ORIENTED_EDGE('',*,*,#327337,.F.); +#327337 = EDGE_CURVE('',#327338,#327338,#327340,.T.); +#327338 = VERTEX_POINT('',#327339); +#327339 = CARTESIAN_POINT('',(130.,-127.935,-4.E-02)); +#327340 = CIRCLE('',#327341,0.435); +#327341 = AXIS2_PLACEMENT_3D('',#327342,#327343,#327344); +#327342 = CARTESIAN_POINT('',(130.,-127.5,-4.E-02)); +#327343 = DIRECTION('',(-0.,0.,-1.)); +#327344 = DIRECTION('',(-0.,-1.,0.)); +#327345 = PLANE('',#327346); +#327346 = AXIS2_PLACEMENT_3D('',#327347,#327348,#327349); +#327347 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#327348 = DIRECTION('',(-0.,-0.,-1.)); +#327349 = DIRECTION('',(-1.,0.,0.)); +#327350 = ADVANCED_FACE('',(#327351),#327362,.F.); +#327351 = FACE_BOUND('',#327352,.T.); +#327352 = EDGE_LOOP('',(#327353,#327354,#327360,#327361)); +#327353 = ORIENTED_EDGE('',*,*,#327337,.T.); +#327354 = ORIENTED_EDGE('',*,*,#327355,.T.); +#327355 = EDGE_CURVE('',#327338,#327318,#327356,.T.); +#327356 = LINE('',#327357,#327358); +#327357 = CARTESIAN_POINT('',(130.,-127.935,-4.6E-02)); +#327358 = VECTOR('',#327359,1.); +#327359 = DIRECTION('',(0.,0.,1.)); +#327360 = ORIENTED_EDGE('',*,*,#327317,.F.); +#327361 = ORIENTED_EDGE('',*,*,#327355,.F.); +#327362 = CYLINDRICAL_SURFACE('',#327363,0.435); +#327363 = AXIS2_PLACEMENT_3D('',#327364,#327365,#327366); +#327364 = CARTESIAN_POINT('',(130.,-127.5,-4.6E-02)); +#327365 = DIRECTION('',(-0.,-0.,-1.)); +#327366 = DIRECTION('',(-0.,-1.,0.)); +#327367 = MANIFOLD_SOLID_BREP('',#327368); +#327368 = CLOSED_SHELL('',(#327369,#327402,#327422,#327442)); +#327369 = ADVANCED_FACE('',(#327370),#327397,.T.); +#327370 = FACE_BOUND('',#327371,.F.); +#327371 = EDGE_LOOP('',(#327372,#327382,#327389,#327390)); +#327372 = ORIENTED_EDGE('',*,*,#327373,.T.); +#327373 = EDGE_CURVE('',#327374,#327376,#327378,.T.); +#327374 = VERTEX_POINT('',#327375); +#327375 = CARTESIAN_POINT('',(130.,-127.96,-4.E-02)); +#327376 = VERTEX_POINT('',#327377); +#327377 = CARTESIAN_POINT('',(130.,-127.96,1.55)); +#327378 = LINE('',#327379,#327380); +#327379 = CARTESIAN_POINT('',(130.,-127.96,-4.E-02)); +#327380 = VECTOR('',#327381,1.); +#327381 = DIRECTION('',(0.,0.,1.)); +#327382 = ORIENTED_EDGE('',*,*,#327383,.T.); +#327383 = EDGE_CURVE('',#327376,#327376,#327384,.T.); +#327384 = CIRCLE('',#327385,0.46); +#327385 = AXIS2_PLACEMENT_3D('',#327386,#327387,#327388); +#327386 = CARTESIAN_POINT('',(130.,-127.5,1.55)); +#327387 = DIRECTION('',(0.,0.,1.)); +#327388 = DIRECTION('',(-0.,-1.,0.)); +#327389 = ORIENTED_EDGE('',*,*,#327373,.F.); +#327390 = ORIENTED_EDGE('',*,*,#327391,.F.); +#327391 = EDGE_CURVE('',#327374,#327374,#327392,.T.); +#327392 = CIRCLE('',#327393,0.46); +#327393 = AXIS2_PLACEMENT_3D('',#327394,#327395,#327396); +#327394 = CARTESIAN_POINT('',(130.,-127.5,-4.E-02)); +#327395 = DIRECTION('',(0.,0.,1.)); +#327396 = DIRECTION('',(-0.,-1.,0.)); +#327397 = CYLINDRICAL_SURFACE('',#327398,0.46); +#327398 = AXIS2_PLACEMENT_3D('',#327399,#327400,#327401); +#327399 = CARTESIAN_POINT('',(130.,-127.5,-4.E-02)); +#327400 = DIRECTION('',(-0.,-0.,-1.)); +#327401 = DIRECTION('',(-0.,-1.,0.)); +#327402 = ADVANCED_FACE('',(#327403,#327406),#327417,.F.); +#327403 = FACE_BOUND('',#327404,.F.); +#327404 = EDGE_LOOP('',(#327405)); +#327405 = ORIENTED_EDGE('',*,*,#327391,.T.); +#327406 = FACE_BOUND('',#327407,.F.); +#327407 = EDGE_LOOP('',(#327408)); +#327408 = ORIENTED_EDGE('',*,*,#327409,.T.); +#327409 = EDGE_CURVE('',#327410,#327410,#327412,.T.); +#327410 = VERTEX_POINT('',#327411); +#327411 = CARTESIAN_POINT('',(130.,-127.935,-4.E-02)); +#327412 = CIRCLE('',#327413,0.435); +#327413 = AXIS2_PLACEMENT_3D('',#327414,#327415,#327416); +#327414 = CARTESIAN_POINT('',(130.,-127.5,-4.E-02)); +#327415 = DIRECTION('',(-0.,0.,-1.)); +#327416 = DIRECTION('',(-0.,-1.,0.)); +#327417 = PLANE('',#327418); +#327418 = AXIS2_PLACEMENT_3D('',#327419,#327420,#327421); +#327419 = CARTESIAN_POINT('',(130.,-127.96,-4.E-02)); +#327420 = DIRECTION('',(0.,0.,1.)); +#327421 = DIRECTION('',(1.,0.,-0.)); +#327422 = ADVANCED_FACE('',(#327423,#327426),#327437,.T.); +#327423 = FACE_BOUND('',#327424,.T.); +#327424 = EDGE_LOOP('',(#327425)); +#327425 = ORIENTED_EDGE('',*,*,#327383,.T.); +#327426 = FACE_BOUND('',#327427,.T.); +#327427 = EDGE_LOOP('',(#327428)); +#327428 = ORIENTED_EDGE('',*,*,#327429,.T.); +#327429 = EDGE_CURVE('',#327430,#327430,#327432,.T.); +#327430 = VERTEX_POINT('',#327431); +#327431 = CARTESIAN_POINT('',(130.,-127.935,1.55)); +#327432 = CIRCLE('',#327433,0.435); +#327433 = AXIS2_PLACEMENT_3D('',#327434,#327435,#327436); +#327434 = CARTESIAN_POINT('',(130.,-127.5,1.55)); +#327435 = DIRECTION('',(-0.,0.,-1.)); +#327436 = DIRECTION('',(-0.,-1.,0.)); +#327437 = PLANE('',#327438); +#327438 = AXIS2_PLACEMENT_3D('',#327439,#327440,#327441); +#327439 = CARTESIAN_POINT('',(130.,-127.96,1.55)); +#327440 = DIRECTION('',(0.,0.,1.)); +#327441 = DIRECTION('',(1.,0.,-0.)); +#327442 = ADVANCED_FACE('',(#327443),#327454,.F.); +#327443 = FACE_BOUND('',#327444,.T.); +#327444 = EDGE_LOOP('',(#327445,#327446,#327452,#327453)); +#327445 = ORIENTED_EDGE('',*,*,#327409,.T.); +#327446 = ORIENTED_EDGE('',*,*,#327447,.T.); +#327447 = EDGE_CURVE('',#327410,#327430,#327448,.T.); +#327448 = LINE('',#327449,#327450); +#327449 = CARTESIAN_POINT('',(130.,-127.935,-4.6E-02)); +#327450 = VECTOR('',#327451,1.); +#327451 = DIRECTION('',(0.,0.,1.)); +#327452 = ORIENTED_EDGE('',*,*,#327429,.F.); +#327453 = ORIENTED_EDGE('',*,*,#327447,.F.); +#327454 = CYLINDRICAL_SURFACE('',#327455,0.435); +#327455 = AXIS2_PLACEMENT_3D('',#327456,#327457,#327458); +#327456 = CARTESIAN_POINT('',(130.,-127.5,-4.6E-02)); +#327457 = DIRECTION('',(-0.,-0.,-1.)); +#327458 = DIRECTION('',(-0.,-1.,0.)); +#327459 = MANIFOLD_SOLID_BREP('',#327460); +#327460 = CLOSED_SHELL('',(#327461,#327494,#327514,#327534)); +#327461 = ADVANCED_FACE('',(#327462),#327489,.T.); +#327462 = FACE_BOUND('',#327463,.F.); +#327463 = EDGE_LOOP('',(#327464,#327474,#327481,#327482)); +#327464 = ORIENTED_EDGE('',*,*,#327465,.T.); +#327465 = EDGE_CURVE('',#327466,#327468,#327470,.T.); +#327466 = VERTEX_POINT('',#327467); +#327467 = CARTESIAN_POINT('',(128.7155,-127.5,1.51)); +#327468 = VERTEX_POINT('',#327469); +#327469 = CARTESIAN_POINT('',(128.7155,-127.5,1.55)); +#327470 = LINE('',#327471,#327472); +#327471 = CARTESIAN_POINT('',(128.7155,-127.5,1.51)); +#327472 = VECTOR('',#327473,1.); +#327473 = DIRECTION('',(0.,0.,1.)); +#327474 = ORIENTED_EDGE('',*,*,#327475,.T.); +#327475 = EDGE_CURVE('',#327468,#327468,#327476,.T.); +#327476 = CIRCLE('',#327477,0.7155); +#327477 = AXIS2_PLACEMENT_3D('',#327478,#327479,#327480); +#327478 = CARTESIAN_POINT('',(128.,-127.5,1.55)); +#327479 = DIRECTION('',(0.,0.,1.)); +#327480 = DIRECTION('',(1.,0.,-0.)); +#327481 = ORIENTED_EDGE('',*,*,#327465,.F.); +#327482 = ORIENTED_EDGE('',*,*,#327483,.F.); +#327483 = EDGE_CURVE('',#327466,#327466,#327484,.T.); +#327484 = CIRCLE('',#327485,0.7155); +#327485 = AXIS2_PLACEMENT_3D('',#327486,#327487,#327488); +#327486 = CARTESIAN_POINT('',(128.,-127.5,1.51)); +#327487 = DIRECTION('',(0.,0.,1.)); +#327488 = DIRECTION('',(1.,0.,-0.)); +#327489 = CYLINDRICAL_SURFACE('',#327490,0.7155); +#327490 = AXIS2_PLACEMENT_3D('',#327491,#327492,#327493); +#327491 = CARTESIAN_POINT('',(128.,-127.5,1.51)); +#327492 = DIRECTION('',(-0.,-0.,-1.)); +#327493 = DIRECTION('',(1.,0.,-0.)); +#327494 = ADVANCED_FACE('',(#327495,#327498),#327509,.F.); +#327495 = FACE_BOUND('',#327496,.F.); +#327496 = EDGE_LOOP('',(#327497)); +#327497 = ORIENTED_EDGE('',*,*,#327483,.T.); +#327498 = FACE_BOUND('',#327499,.F.); +#327499 = EDGE_LOOP('',(#327500)); +#327500 = ORIENTED_EDGE('',*,*,#327501,.T.); +#327501 = EDGE_CURVE('',#327502,#327502,#327504,.T.); +#327502 = VERTEX_POINT('',#327503); +#327503 = CARTESIAN_POINT('',(128.,-127.935,1.51)); +#327504 = CIRCLE('',#327505,0.435); +#327505 = AXIS2_PLACEMENT_3D('',#327506,#327507,#327508); +#327506 = CARTESIAN_POINT('',(128.,-127.5,1.51)); +#327507 = DIRECTION('',(-0.,0.,-1.)); +#327508 = DIRECTION('',(-0.,-1.,0.)); +#327509 = PLANE('',#327510); +#327510 = AXIS2_PLACEMENT_3D('',#327511,#327512,#327513); +#327511 = CARTESIAN_POINT('',(0.,0.,1.51)); +#327512 = DIRECTION('',(0.,0.,1.)); +#327513 = DIRECTION('',(1.,0.,-0.)); +#327514 = ADVANCED_FACE('',(#327515,#327518),#327529,.T.); +#327515 = FACE_BOUND('',#327516,.T.); +#327516 = EDGE_LOOP('',(#327517)); +#327517 = ORIENTED_EDGE('',*,*,#327475,.T.); +#327518 = FACE_BOUND('',#327519,.T.); +#327519 = EDGE_LOOP('',(#327520)); +#327520 = ORIENTED_EDGE('',*,*,#327521,.T.); +#327521 = EDGE_CURVE('',#327522,#327522,#327524,.T.); +#327522 = VERTEX_POINT('',#327523); +#327523 = CARTESIAN_POINT('',(128.,-127.935,1.55)); +#327524 = CIRCLE('',#327525,0.435); +#327525 = AXIS2_PLACEMENT_3D('',#327526,#327527,#327528); +#327526 = CARTESIAN_POINT('',(128.,-127.5,1.55)); +#327527 = DIRECTION('',(-0.,0.,-1.)); +#327528 = DIRECTION('',(-0.,-1.,0.)); +#327529 = PLANE('',#327530); +#327530 = AXIS2_PLACEMENT_3D('',#327531,#327532,#327533); +#327531 = CARTESIAN_POINT('',(0.,0.,1.55)); +#327532 = DIRECTION('',(0.,0.,1.)); +#327533 = DIRECTION('',(1.,0.,-0.)); +#327534 = ADVANCED_FACE('',(#327535),#327546,.F.); +#327535 = FACE_BOUND('',#327536,.T.); +#327536 = EDGE_LOOP('',(#327537,#327538,#327544,#327545)); +#327537 = ORIENTED_EDGE('',*,*,#327501,.T.); +#327538 = ORIENTED_EDGE('',*,*,#327539,.T.); +#327539 = EDGE_CURVE('',#327502,#327522,#327540,.T.); +#327540 = LINE('',#327541,#327542); +#327541 = CARTESIAN_POINT('',(128.,-127.935,-4.6E-02)); +#327542 = VECTOR('',#327543,1.); +#327543 = DIRECTION('',(0.,0.,1.)); +#327544 = ORIENTED_EDGE('',*,*,#327521,.F.); +#327545 = ORIENTED_EDGE('',*,*,#327539,.F.); +#327546 = CYLINDRICAL_SURFACE('',#327547,0.435); +#327547 = AXIS2_PLACEMENT_3D('',#327548,#327549,#327550); +#327548 = CARTESIAN_POINT('',(128.,-127.5,-4.6E-02)); +#327549 = DIRECTION('',(-0.,-0.,-1.)); +#327550 = DIRECTION('',(-0.,-1.,0.)); +#327551 = MANIFOLD_SOLID_BREP('',#327552); +#327552 = CLOSED_SHELL('',(#327553,#327586,#327606,#327626)); +#327553 = ADVANCED_FACE('',(#327554),#327581,.T.); +#327554 = FACE_BOUND('',#327555,.T.); +#327555 = EDGE_LOOP('',(#327556,#327566,#327573,#327574)); +#327556 = ORIENTED_EDGE('',*,*,#327557,.T.); +#327557 = EDGE_CURVE('',#327558,#327560,#327562,.T.); +#327558 = VERTEX_POINT('',#327559); +#327559 = CARTESIAN_POINT('',(128.7155,-127.5,0.)); +#327560 = VERTEX_POINT('',#327561); +#327561 = CARTESIAN_POINT('',(128.7155,-127.5,-4.E-02)); +#327562 = LINE('',#327563,#327564); +#327563 = CARTESIAN_POINT('',(128.7155,-127.5,0.)); +#327564 = VECTOR('',#327565,1.); +#327565 = DIRECTION('',(0.,0.,-1.)); +#327566 = ORIENTED_EDGE('',*,*,#327567,.T.); +#327567 = EDGE_CURVE('',#327560,#327560,#327568,.T.); +#327568 = CIRCLE('',#327569,0.7155); +#327569 = AXIS2_PLACEMENT_3D('',#327570,#327571,#327572); +#327570 = CARTESIAN_POINT('',(128.,-127.5,-4.E-02)); +#327571 = DIRECTION('',(0.,0.,1.)); +#327572 = DIRECTION('',(1.,0.,-0.)); +#327573 = ORIENTED_EDGE('',*,*,#327557,.F.); +#327574 = ORIENTED_EDGE('',*,*,#327575,.F.); +#327575 = EDGE_CURVE('',#327558,#327558,#327576,.T.); +#327576 = CIRCLE('',#327577,0.7155); +#327577 = AXIS2_PLACEMENT_3D('',#327578,#327579,#327580); +#327578 = CARTESIAN_POINT('',(128.,-127.5,0.)); +#327579 = DIRECTION('',(0.,0.,1.)); +#327580 = DIRECTION('',(1.,0.,-0.)); +#327581 = CYLINDRICAL_SURFACE('',#327582,0.7155); +#327582 = AXIS2_PLACEMENT_3D('',#327583,#327584,#327585); +#327583 = CARTESIAN_POINT('',(128.,-127.5,0.)); +#327584 = DIRECTION('',(0.,0.,1.)); +#327585 = DIRECTION('',(1.,0.,-0.)); +#327586 = ADVANCED_FACE('',(#327587,#327590),#327601,.F.); +#327587 = FACE_BOUND('',#327588,.F.); +#327588 = EDGE_LOOP('',(#327589)); +#327589 = ORIENTED_EDGE('',*,*,#327575,.F.); +#327590 = FACE_BOUND('',#327591,.F.); +#327591 = EDGE_LOOP('',(#327592)); +#327592 = ORIENTED_EDGE('',*,*,#327593,.F.); +#327593 = EDGE_CURVE('',#327594,#327594,#327596,.T.); +#327594 = VERTEX_POINT('',#327595); +#327595 = CARTESIAN_POINT('',(128.,-127.935,0.)); +#327596 = CIRCLE('',#327597,0.435); +#327597 = AXIS2_PLACEMENT_3D('',#327598,#327599,#327600); +#327598 = CARTESIAN_POINT('',(128.,-127.5,0.)); +#327599 = DIRECTION('',(-0.,0.,-1.)); +#327600 = DIRECTION('',(-0.,-1.,0.)); +#327601 = PLANE('',#327602); +#327602 = AXIS2_PLACEMENT_3D('',#327603,#327604,#327605); +#327603 = CARTESIAN_POINT('',(0.,0.,0.)); +#327604 = DIRECTION('',(-0.,-0.,-1.)); +#327605 = DIRECTION('',(-1.,0.,0.)); +#327606 = ADVANCED_FACE('',(#327607,#327610),#327621,.T.); +#327607 = FACE_BOUND('',#327608,.T.); +#327608 = EDGE_LOOP('',(#327609)); +#327609 = ORIENTED_EDGE('',*,*,#327567,.F.); +#327610 = FACE_BOUND('',#327611,.T.); +#327611 = EDGE_LOOP('',(#327612)); +#327612 = ORIENTED_EDGE('',*,*,#327613,.F.); +#327613 = EDGE_CURVE('',#327614,#327614,#327616,.T.); +#327614 = VERTEX_POINT('',#327615); +#327615 = CARTESIAN_POINT('',(128.,-127.935,-4.E-02)); +#327616 = CIRCLE('',#327617,0.435); +#327617 = AXIS2_PLACEMENT_3D('',#327618,#327619,#327620); +#327618 = CARTESIAN_POINT('',(128.,-127.5,-4.E-02)); +#327619 = DIRECTION('',(-0.,0.,-1.)); +#327620 = DIRECTION('',(-0.,-1.,0.)); +#327621 = PLANE('',#327622); +#327622 = AXIS2_PLACEMENT_3D('',#327623,#327624,#327625); +#327623 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#327624 = DIRECTION('',(-0.,-0.,-1.)); +#327625 = DIRECTION('',(-1.,0.,0.)); +#327626 = ADVANCED_FACE('',(#327627),#327638,.F.); +#327627 = FACE_BOUND('',#327628,.T.); +#327628 = EDGE_LOOP('',(#327629,#327630,#327636,#327637)); +#327629 = ORIENTED_EDGE('',*,*,#327613,.T.); +#327630 = ORIENTED_EDGE('',*,*,#327631,.T.); +#327631 = EDGE_CURVE('',#327614,#327594,#327632,.T.); +#327632 = LINE('',#327633,#327634); +#327633 = CARTESIAN_POINT('',(128.,-127.935,-4.6E-02)); +#327634 = VECTOR('',#327635,1.); +#327635 = DIRECTION('',(0.,0.,1.)); +#327636 = ORIENTED_EDGE('',*,*,#327593,.F.); +#327637 = ORIENTED_EDGE('',*,*,#327631,.F.); +#327638 = CYLINDRICAL_SURFACE('',#327639,0.435); +#327639 = AXIS2_PLACEMENT_3D('',#327640,#327641,#327642); +#327640 = CARTESIAN_POINT('',(128.,-127.5,-4.6E-02)); +#327641 = DIRECTION('',(-0.,-0.,-1.)); +#327642 = DIRECTION('',(-0.,-1.,0.)); +#327643 = MANIFOLD_SOLID_BREP('',#327644); +#327644 = CLOSED_SHELL('',(#327645,#327678,#327698,#327718)); +#327645 = ADVANCED_FACE('',(#327646),#327673,.T.); +#327646 = FACE_BOUND('',#327647,.F.); +#327647 = EDGE_LOOP('',(#327648,#327658,#327665,#327666)); +#327648 = ORIENTED_EDGE('',*,*,#327649,.T.); +#327649 = EDGE_CURVE('',#327650,#327652,#327654,.T.); +#327650 = VERTEX_POINT('',#327651); +#327651 = CARTESIAN_POINT('',(128.,-127.96,-4.E-02)); +#327652 = VERTEX_POINT('',#327653); +#327653 = CARTESIAN_POINT('',(128.,-127.96,1.55)); +#327654 = LINE('',#327655,#327656); +#327655 = CARTESIAN_POINT('',(128.,-127.96,-4.E-02)); +#327656 = VECTOR('',#327657,1.); +#327657 = DIRECTION('',(0.,0.,1.)); +#327658 = ORIENTED_EDGE('',*,*,#327659,.T.); +#327659 = EDGE_CURVE('',#327652,#327652,#327660,.T.); +#327660 = CIRCLE('',#327661,0.46); +#327661 = AXIS2_PLACEMENT_3D('',#327662,#327663,#327664); +#327662 = CARTESIAN_POINT('',(128.,-127.5,1.55)); +#327663 = DIRECTION('',(0.,0.,1.)); +#327664 = DIRECTION('',(-0.,-1.,0.)); +#327665 = ORIENTED_EDGE('',*,*,#327649,.F.); +#327666 = ORIENTED_EDGE('',*,*,#327667,.F.); +#327667 = EDGE_CURVE('',#327650,#327650,#327668,.T.); +#327668 = CIRCLE('',#327669,0.46); +#327669 = AXIS2_PLACEMENT_3D('',#327670,#327671,#327672); +#327670 = CARTESIAN_POINT('',(128.,-127.5,-4.E-02)); +#327671 = DIRECTION('',(0.,0.,1.)); +#327672 = DIRECTION('',(-0.,-1.,0.)); +#327673 = CYLINDRICAL_SURFACE('',#327674,0.46); +#327674 = AXIS2_PLACEMENT_3D('',#327675,#327676,#327677); +#327675 = CARTESIAN_POINT('',(128.,-127.5,-4.E-02)); +#327676 = DIRECTION('',(-0.,-0.,-1.)); +#327677 = DIRECTION('',(-0.,-1.,0.)); +#327678 = ADVANCED_FACE('',(#327679,#327682),#327693,.F.); +#327679 = FACE_BOUND('',#327680,.F.); +#327680 = EDGE_LOOP('',(#327681)); +#327681 = ORIENTED_EDGE('',*,*,#327667,.T.); +#327682 = FACE_BOUND('',#327683,.F.); +#327683 = EDGE_LOOP('',(#327684)); +#327684 = ORIENTED_EDGE('',*,*,#327685,.T.); +#327685 = EDGE_CURVE('',#327686,#327686,#327688,.T.); +#327686 = VERTEX_POINT('',#327687); +#327687 = CARTESIAN_POINT('',(128.,-127.935,-4.E-02)); +#327688 = CIRCLE('',#327689,0.435); +#327689 = AXIS2_PLACEMENT_3D('',#327690,#327691,#327692); +#327690 = CARTESIAN_POINT('',(128.,-127.5,-4.E-02)); +#327691 = DIRECTION('',(-0.,0.,-1.)); +#327692 = DIRECTION('',(-0.,-1.,0.)); +#327693 = PLANE('',#327694); +#327694 = AXIS2_PLACEMENT_3D('',#327695,#327696,#327697); +#327695 = CARTESIAN_POINT('',(128.,-127.96,-4.E-02)); +#327696 = DIRECTION('',(0.,0.,1.)); +#327697 = DIRECTION('',(1.,0.,-0.)); +#327698 = ADVANCED_FACE('',(#327699,#327702),#327713,.T.); +#327699 = FACE_BOUND('',#327700,.T.); +#327700 = EDGE_LOOP('',(#327701)); +#327701 = ORIENTED_EDGE('',*,*,#327659,.T.); +#327702 = FACE_BOUND('',#327703,.T.); +#327703 = EDGE_LOOP('',(#327704)); +#327704 = ORIENTED_EDGE('',*,*,#327705,.T.); +#327705 = EDGE_CURVE('',#327706,#327706,#327708,.T.); +#327706 = VERTEX_POINT('',#327707); +#327707 = CARTESIAN_POINT('',(128.,-127.935,1.55)); +#327708 = CIRCLE('',#327709,0.435); +#327709 = AXIS2_PLACEMENT_3D('',#327710,#327711,#327712); +#327710 = CARTESIAN_POINT('',(128.,-127.5,1.55)); +#327711 = DIRECTION('',(-0.,0.,-1.)); +#327712 = DIRECTION('',(-0.,-1.,0.)); +#327713 = PLANE('',#327714); +#327714 = AXIS2_PLACEMENT_3D('',#327715,#327716,#327717); +#327715 = CARTESIAN_POINT('',(128.,-127.96,1.55)); +#327716 = DIRECTION('',(0.,0.,1.)); +#327717 = DIRECTION('',(1.,0.,-0.)); +#327718 = ADVANCED_FACE('',(#327719),#327730,.F.); +#327719 = FACE_BOUND('',#327720,.T.); +#327720 = EDGE_LOOP('',(#327721,#327722,#327728,#327729)); +#327721 = ORIENTED_EDGE('',*,*,#327685,.T.); +#327722 = ORIENTED_EDGE('',*,*,#327723,.T.); +#327723 = EDGE_CURVE('',#327686,#327706,#327724,.T.); +#327724 = LINE('',#327725,#327726); +#327725 = CARTESIAN_POINT('',(128.,-127.935,-4.6E-02)); +#327726 = VECTOR('',#327727,1.); +#327727 = DIRECTION('',(0.,0.,1.)); +#327728 = ORIENTED_EDGE('',*,*,#327705,.F.); +#327729 = ORIENTED_EDGE('',*,*,#327723,.F.); +#327730 = CYLINDRICAL_SURFACE('',#327731,0.435); +#327731 = AXIS2_PLACEMENT_3D('',#327732,#327733,#327734); +#327732 = CARTESIAN_POINT('',(128.,-127.5,-4.6E-02)); +#327733 = DIRECTION('',(-0.,-0.,-1.)); +#327734 = DIRECTION('',(-0.,-1.,0.)); +#327735 = MANIFOLD_SOLID_BREP('',#327736); +#327736 = CLOSED_SHELL('',(#327737,#327770,#327790,#327810)); +#327737 = ADVANCED_FACE('',(#327738),#327765,.T.); +#327738 = FACE_BOUND('',#327739,.F.); +#327739 = EDGE_LOOP('',(#327740,#327750,#327757,#327758)); +#327740 = ORIENTED_EDGE('',*,*,#327741,.T.); +#327741 = EDGE_CURVE('',#327742,#327744,#327746,.T.); +#327742 = VERTEX_POINT('',#327743); +#327743 = CARTESIAN_POINT('',(126.7155,-149.5,1.51)); +#327744 = VERTEX_POINT('',#327745); +#327745 = CARTESIAN_POINT('',(126.7155,-149.5,1.55)); +#327746 = LINE('',#327747,#327748); +#327747 = CARTESIAN_POINT('',(126.7155,-149.5,1.51)); +#327748 = VECTOR('',#327749,1.); +#327749 = DIRECTION('',(0.,0.,1.)); +#327750 = ORIENTED_EDGE('',*,*,#327751,.T.); +#327751 = EDGE_CURVE('',#327744,#327744,#327752,.T.); +#327752 = CIRCLE('',#327753,0.7155); +#327753 = AXIS2_PLACEMENT_3D('',#327754,#327755,#327756); +#327754 = CARTESIAN_POINT('',(126.,-149.5,1.55)); +#327755 = DIRECTION('',(0.,0.,1.)); +#327756 = DIRECTION('',(1.,0.,-0.)); +#327757 = ORIENTED_EDGE('',*,*,#327741,.F.); +#327758 = ORIENTED_EDGE('',*,*,#327759,.F.); +#327759 = EDGE_CURVE('',#327742,#327742,#327760,.T.); +#327760 = CIRCLE('',#327761,0.7155); +#327761 = AXIS2_PLACEMENT_3D('',#327762,#327763,#327764); +#327762 = CARTESIAN_POINT('',(126.,-149.5,1.51)); +#327763 = DIRECTION('',(0.,0.,1.)); +#327764 = DIRECTION('',(1.,0.,-0.)); +#327765 = CYLINDRICAL_SURFACE('',#327766,0.7155); +#327766 = AXIS2_PLACEMENT_3D('',#327767,#327768,#327769); +#327767 = CARTESIAN_POINT('',(126.,-149.5,1.51)); +#327768 = DIRECTION('',(-0.,-0.,-1.)); +#327769 = DIRECTION('',(1.,0.,-0.)); +#327770 = ADVANCED_FACE('',(#327771,#327774),#327785,.F.); +#327771 = FACE_BOUND('',#327772,.F.); +#327772 = EDGE_LOOP('',(#327773)); +#327773 = ORIENTED_EDGE('',*,*,#327759,.T.); +#327774 = FACE_BOUND('',#327775,.F.); +#327775 = EDGE_LOOP('',(#327776)); +#327776 = ORIENTED_EDGE('',*,*,#327777,.T.); +#327777 = EDGE_CURVE('',#327778,#327778,#327780,.T.); +#327778 = VERTEX_POINT('',#327779); +#327779 = CARTESIAN_POINT('',(126.,-149.935,1.51)); +#327780 = CIRCLE('',#327781,0.435); +#327781 = AXIS2_PLACEMENT_3D('',#327782,#327783,#327784); +#327782 = CARTESIAN_POINT('',(126.,-149.5,1.51)); +#327783 = DIRECTION('',(-0.,0.,-1.)); +#327784 = DIRECTION('',(-0.,-1.,0.)); +#327785 = PLANE('',#327786); +#327786 = AXIS2_PLACEMENT_3D('',#327787,#327788,#327789); +#327787 = CARTESIAN_POINT('',(0.,0.,1.51)); +#327788 = DIRECTION('',(0.,0.,1.)); +#327789 = DIRECTION('',(1.,0.,-0.)); +#327790 = ADVANCED_FACE('',(#327791,#327794),#327805,.T.); +#327791 = FACE_BOUND('',#327792,.T.); +#327792 = EDGE_LOOP('',(#327793)); +#327793 = ORIENTED_EDGE('',*,*,#327751,.T.); +#327794 = FACE_BOUND('',#327795,.T.); +#327795 = EDGE_LOOP('',(#327796)); +#327796 = ORIENTED_EDGE('',*,*,#327797,.T.); +#327797 = EDGE_CURVE('',#327798,#327798,#327800,.T.); +#327798 = VERTEX_POINT('',#327799); +#327799 = CARTESIAN_POINT('',(126.,-149.935,1.55)); +#327800 = CIRCLE('',#327801,0.435); +#327801 = AXIS2_PLACEMENT_3D('',#327802,#327803,#327804); +#327802 = CARTESIAN_POINT('',(126.,-149.5,1.55)); +#327803 = DIRECTION('',(-0.,0.,-1.)); +#327804 = DIRECTION('',(-0.,-1.,0.)); +#327805 = PLANE('',#327806); +#327806 = AXIS2_PLACEMENT_3D('',#327807,#327808,#327809); +#327807 = CARTESIAN_POINT('',(0.,0.,1.55)); +#327808 = DIRECTION('',(0.,0.,1.)); +#327809 = DIRECTION('',(1.,0.,-0.)); +#327810 = ADVANCED_FACE('',(#327811),#327822,.F.); +#327811 = FACE_BOUND('',#327812,.T.); +#327812 = EDGE_LOOP('',(#327813,#327814,#327820,#327821)); +#327813 = ORIENTED_EDGE('',*,*,#327777,.T.); +#327814 = ORIENTED_EDGE('',*,*,#327815,.T.); +#327815 = EDGE_CURVE('',#327778,#327798,#327816,.T.); +#327816 = LINE('',#327817,#327818); +#327817 = CARTESIAN_POINT('',(126.,-149.935,-4.6E-02)); +#327818 = VECTOR('',#327819,1.); +#327819 = DIRECTION('',(0.,0.,1.)); +#327820 = ORIENTED_EDGE('',*,*,#327797,.F.); +#327821 = ORIENTED_EDGE('',*,*,#327815,.F.); +#327822 = CYLINDRICAL_SURFACE('',#327823,0.435); +#327823 = AXIS2_PLACEMENT_3D('',#327824,#327825,#327826); +#327824 = CARTESIAN_POINT('',(126.,-149.5,-4.6E-02)); +#327825 = DIRECTION('',(-0.,-0.,-1.)); +#327826 = DIRECTION('',(-0.,-1.,0.)); +#327827 = MANIFOLD_SOLID_BREP('',#327828); +#327828 = CLOSED_SHELL('',(#327829,#327862,#327882,#327902)); +#327829 = ADVANCED_FACE('',(#327830),#327857,.T.); +#327830 = FACE_BOUND('',#327831,.T.); +#327831 = EDGE_LOOP('',(#327832,#327842,#327849,#327850)); +#327832 = ORIENTED_EDGE('',*,*,#327833,.T.); +#327833 = EDGE_CURVE('',#327834,#327836,#327838,.T.); +#327834 = VERTEX_POINT('',#327835); +#327835 = CARTESIAN_POINT('',(126.7155,-149.5,0.)); +#327836 = VERTEX_POINT('',#327837); +#327837 = CARTESIAN_POINT('',(126.7155,-149.5,-4.E-02)); +#327838 = LINE('',#327839,#327840); +#327839 = CARTESIAN_POINT('',(126.7155,-149.5,0.)); +#327840 = VECTOR('',#327841,1.); +#327841 = DIRECTION('',(0.,0.,-1.)); +#327842 = ORIENTED_EDGE('',*,*,#327843,.T.); +#327843 = EDGE_CURVE('',#327836,#327836,#327844,.T.); +#327844 = CIRCLE('',#327845,0.7155); +#327845 = AXIS2_PLACEMENT_3D('',#327846,#327847,#327848); +#327846 = CARTESIAN_POINT('',(126.,-149.5,-4.E-02)); +#327847 = DIRECTION('',(0.,0.,1.)); +#327848 = DIRECTION('',(1.,0.,-0.)); +#327849 = ORIENTED_EDGE('',*,*,#327833,.F.); +#327850 = ORIENTED_EDGE('',*,*,#327851,.F.); +#327851 = EDGE_CURVE('',#327834,#327834,#327852,.T.); +#327852 = CIRCLE('',#327853,0.7155); +#327853 = AXIS2_PLACEMENT_3D('',#327854,#327855,#327856); +#327854 = CARTESIAN_POINT('',(126.,-149.5,0.)); +#327855 = DIRECTION('',(0.,0.,1.)); +#327856 = DIRECTION('',(1.,0.,-0.)); +#327857 = CYLINDRICAL_SURFACE('',#327858,0.7155); +#327858 = AXIS2_PLACEMENT_3D('',#327859,#327860,#327861); +#327859 = CARTESIAN_POINT('',(126.,-149.5,0.)); +#327860 = DIRECTION('',(0.,0.,1.)); +#327861 = DIRECTION('',(1.,0.,-0.)); +#327862 = ADVANCED_FACE('',(#327863,#327866),#327877,.F.); +#327863 = FACE_BOUND('',#327864,.F.); +#327864 = EDGE_LOOP('',(#327865)); +#327865 = ORIENTED_EDGE('',*,*,#327851,.F.); +#327866 = FACE_BOUND('',#327867,.F.); +#327867 = EDGE_LOOP('',(#327868)); +#327868 = ORIENTED_EDGE('',*,*,#327869,.F.); +#327869 = EDGE_CURVE('',#327870,#327870,#327872,.T.); +#327870 = VERTEX_POINT('',#327871); +#327871 = CARTESIAN_POINT('',(126.,-149.935,0.)); +#327872 = CIRCLE('',#327873,0.435); +#327873 = AXIS2_PLACEMENT_3D('',#327874,#327875,#327876); +#327874 = CARTESIAN_POINT('',(126.,-149.5,0.)); +#327875 = DIRECTION('',(-0.,0.,-1.)); +#327876 = DIRECTION('',(-0.,-1.,0.)); +#327877 = PLANE('',#327878); +#327878 = AXIS2_PLACEMENT_3D('',#327879,#327880,#327881); +#327879 = CARTESIAN_POINT('',(0.,0.,0.)); +#327880 = DIRECTION('',(-0.,-0.,-1.)); +#327881 = DIRECTION('',(-1.,0.,0.)); +#327882 = ADVANCED_FACE('',(#327883,#327886),#327897,.T.); +#327883 = FACE_BOUND('',#327884,.T.); +#327884 = EDGE_LOOP('',(#327885)); +#327885 = ORIENTED_EDGE('',*,*,#327843,.F.); +#327886 = FACE_BOUND('',#327887,.T.); +#327887 = EDGE_LOOP('',(#327888)); +#327888 = ORIENTED_EDGE('',*,*,#327889,.F.); +#327889 = EDGE_CURVE('',#327890,#327890,#327892,.T.); +#327890 = VERTEX_POINT('',#327891); +#327891 = CARTESIAN_POINT('',(126.,-149.935,-4.E-02)); +#327892 = CIRCLE('',#327893,0.435); +#327893 = AXIS2_PLACEMENT_3D('',#327894,#327895,#327896); +#327894 = CARTESIAN_POINT('',(126.,-149.5,-4.E-02)); +#327895 = DIRECTION('',(-0.,0.,-1.)); +#327896 = DIRECTION('',(-0.,-1.,0.)); +#327897 = PLANE('',#327898); +#327898 = AXIS2_PLACEMENT_3D('',#327899,#327900,#327901); +#327899 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#327900 = DIRECTION('',(-0.,-0.,-1.)); +#327901 = DIRECTION('',(-1.,0.,0.)); +#327902 = ADVANCED_FACE('',(#327903),#327914,.F.); +#327903 = FACE_BOUND('',#327904,.T.); +#327904 = EDGE_LOOP('',(#327905,#327906,#327912,#327913)); +#327905 = ORIENTED_EDGE('',*,*,#327889,.T.); +#327906 = ORIENTED_EDGE('',*,*,#327907,.T.); +#327907 = EDGE_CURVE('',#327890,#327870,#327908,.T.); +#327908 = LINE('',#327909,#327910); +#327909 = CARTESIAN_POINT('',(126.,-149.935,-4.6E-02)); +#327910 = VECTOR('',#327911,1.); +#327911 = DIRECTION('',(0.,0.,1.)); +#327912 = ORIENTED_EDGE('',*,*,#327869,.F.); +#327913 = ORIENTED_EDGE('',*,*,#327907,.F.); +#327914 = CYLINDRICAL_SURFACE('',#327915,0.435); +#327915 = AXIS2_PLACEMENT_3D('',#327916,#327917,#327918); +#327916 = CARTESIAN_POINT('',(126.,-149.5,-4.6E-02)); +#327917 = DIRECTION('',(-0.,-0.,-1.)); +#327918 = DIRECTION('',(-0.,-1.,0.)); +#327919 = MANIFOLD_SOLID_BREP('',#327920); +#327920 = CLOSED_SHELL('',(#327921,#327954,#327974,#327994)); +#327921 = ADVANCED_FACE('',(#327922),#327949,.T.); +#327922 = FACE_BOUND('',#327923,.F.); +#327923 = EDGE_LOOP('',(#327924,#327934,#327941,#327942)); +#327924 = ORIENTED_EDGE('',*,*,#327925,.T.); +#327925 = EDGE_CURVE('',#327926,#327928,#327930,.T.); +#327926 = VERTEX_POINT('',#327927); +#327927 = CARTESIAN_POINT('',(126.,-149.96,-4.E-02)); +#327928 = VERTEX_POINT('',#327929); +#327929 = CARTESIAN_POINT('',(126.,-149.96,1.55)); +#327930 = LINE('',#327931,#327932); +#327931 = CARTESIAN_POINT('',(126.,-149.96,-4.E-02)); +#327932 = VECTOR('',#327933,1.); +#327933 = DIRECTION('',(0.,0.,1.)); +#327934 = ORIENTED_EDGE('',*,*,#327935,.T.); +#327935 = EDGE_CURVE('',#327928,#327928,#327936,.T.); +#327936 = CIRCLE('',#327937,0.46); +#327937 = AXIS2_PLACEMENT_3D('',#327938,#327939,#327940); +#327938 = CARTESIAN_POINT('',(126.,-149.5,1.55)); +#327939 = DIRECTION('',(0.,0.,1.)); +#327940 = DIRECTION('',(-0.,-1.,0.)); +#327941 = ORIENTED_EDGE('',*,*,#327925,.F.); +#327942 = ORIENTED_EDGE('',*,*,#327943,.F.); +#327943 = EDGE_CURVE('',#327926,#327926,#327944,.T.); +#327944 = CIRCLE('',#327945,0.46); +#327945 = AXIS2_PLACEMENT_3D('',#327946,#327947,#327948); +#327946 = CARTESIAN_POINT('',(126.,-149.5,-4.E-02)); +#327947 = DIRECTION('',(0.,0.,1.)); +#327948 = DIRECTION('',(-0.,-1.,0.)); +#327949 = CYLINDRICAL_SURFACE('',#327950,0.46); +#327950 = AXIS2_PLACEMENT_3D('',#327951,#327952,#327953); +#327951 = CARTESIAN_POINT('',(126.,-149.5,-4.E-02)); +#327952 = DIRECTION('',(-0.,-0.,-1.)); +#327953 = DIRECTION('',(-0.,-1.,0.)); +#327954 = ADVANCED_FACE('',(#327955,#327958),#327969,.F.); +#327955 = FACE_BOUND('',#327956,.F.); +#327956 = EDGE_LOOP('',(#327957)); +#327957 = ORIENTED_EDGE('',*,*,#327943,.T.); +#327958 = FACE_BOUND('',#327959,.F.); +#327959 = EDGE_LOOP('',(#327960)); +#327960 = ORIENTED_EDGE('',*,*,#327961,.T.); +#327961 = EDGE_CURVE('',#327962,#327962,#327964,.T.); +#327962 = VERTEX_POINT('',#327963); +#327963 = CARTESIAN_POINT('',(126.,-149.935,-4.E-02)); +#327964 = CIRCLE('',#327965,0.435); +#327965 = AXIS2_PLACEMENT_3D('',#327966,#327967,#327968); +#327966 = CARTESIAN_POINT('',(126.,-149.5,-4.E-02)); +#327967 = DIRECTION('',(-0.,0.,-1.)); +#327968 = DIRECTION('',(-0.,-1.,0.)); +#327969 = PLANE('',#327970); +#327970 = AXIS2_PLACEMENT_3D('',#327971,#327972,#327973); +#327971 = CARTESIAN_POINT('',(126.,-149.96,-4.E-02)); +#327972 = DIRECTION('',(0.,0.,1.)); +#327973 = DIRECTION('',(1.,0.,-0.)); +#327974 = ADVANCED_FACE('',(#327975,#327978),#327989,.T.); +#327975 = FACE_BOUND('',#327976,.T.); +#327976 = EDGE_LOOP('',(#327977)); +#327977 = ORIENTED_EDGE('',*,*,#327935,.T.); +#327978 = FACE_BOUND('',#327979,.T.); +#327979 = EDGE_LOOP('',(#327980)); +#327980 = ORIENTED_EDGE('',*,*,#327981,.T.); +#327981 = EDGE_CURVE('',#327982,#327982,#327984,.T.); +#327982 = VERTEX_POINT('',#327983); +#327983 = CARTESIAN_POINT('',(126.,-149.935,1.55)); +#327984 = CIRCLE('',#327985,0.435); +#327985 = AXIS2_PLACEMENT_3D('',#327986,#327987,#327988); +#327986 = CARTESIAN_POINT('',(126.,-149.5,1.55)); +#327987 = DIRECTION('',(-0.,0.,-1.)); +#327988 = DIRECTION('',(-0.,-1.,0.)); +#327989 = PLANE('',#327990); +#327990 = AXIS2_PLACEMENT_3D('',#327991,#327992,#327993); +#327991 = CARTESIAN_POINT('',(126.,-149.96,1.55)); +#327992 = DIRECTION('',(0.,0.,1.)); +#327993 = DIRECTION('',(1.,0.,-0.)); +#327994 = ADVANCED_FACE('',(#327995),#328006,.F.); +#327995 = FACE_BOUND('',#327996,.T.); +#327996 = EDGE_LOOP('',(#327997,#327998,#328004,#328005)); +#327997 = ORIENTED_EDGE('',*,*,#327961,.T.); +#327998 = ORIENTED_EDGE('',*,*,#327999,.T.); +#327999 = EDGE_CURVE('',#327962,#327982,#328000,.T.); +#328000 = LINE('',#328001,#328002); +#328001 = CARTESIAN_POINT('',(126.,-149.935,-4.6E-02)); +#328002 = VECTOR('',#328003,1.); +#328003 = DIRECTION('',(0.,0.,1.)); +#328004 = ORIENTED_EDGE('',*,*,#327981,.F.); +#328005 = ORIENTED_EDGE('',*,*,#327999,.F.); +#328006 = CYLINDRICAL_SURFACE('',#328007,0.435); +#328007 = AXIS2_PLACEMENT_3D('',#328008,#328009,#328010); +#328008 = CARTESIAN_POINT('',(126.,-149.5,-4.6E-02)); +#328009 = DIRECTION('',(-0.,-0.,-1.)); +#328010 = DIRECTION('',(-0.,-1.,0.)); +#328011 = MANIFOLD_SOLID_BREP('',#328012); +#328012 = CLOSED_SHELL('',(#328013,#328046,#328066,#328086)); +#328013 = ADVANCED_FACE('',(#328014),#328041,.T.); +#328014 = FACE_BOUND('',#328015,.F.); +#328015 = EDGE_LOOP('',(#328016,#328026,#328033,#328034)); +#328016 = ORIENTED_EDGE('',*,*,#328017,.T.); +#328017 = EDGE_CURVE('',#328018,#328020,#328022,.T.); +#328018 = VERTEX_POINT('',#328019); +#328019 = CARTESIAN_POINT('',(130.7155,-149.5,1.51)); +#328020 = VERTEX_POINT('',#328021); +#328021 = CARTESIAN_POINT('',(130.7155,-149.5,1.55)); +#328022 = LINE('',#328023,#328024); +#328023 = CARTESIAN_POINT('',(130.7155,-149.5,1.51)); +#328024 = VECTOR('',#328025,1.); +#328025 = DIRECTION('',(0.,0.,1.)); +#328026 = ORIENTED_EDGE('',*,*,#328027,.T.); +#328027 = EDGE_CURVE('',#328020,#328020,#328028,.T.); +#328028 = CIRCLE('',#328029,0.7155); +#328029 = AXIS2_PLACEMENT_3D('',#328030,#328031,#328032); +#328030 = CARTESIAN_POINT('',(130.,-149.5,1.55)); +#328031 = DIRECTION('',(0.,0.,1.)); +#328032 = DIRECTION('',(1.,0.,-0.)); +#328033 = ORIENTED_EDGE('',*,*,#328017,.F.); +#328034 = ORIENTED_EDGE('',*,*,#328035,.F.); +#328035 = EDGE_CURVE('',#328018,#328018,#328036,.T.); +#328036 = CIRCLE('',#328037,0.7155); +#328037 = AXIS2_PLACEMENT_3D('',#328038,#328039,#328040); +#328038 = CARTESIAN_POINT('',(130.,-149.5,1.51)); +#328039 = DIRECTION('',(0.,0.,1.)); +#328040 = DIRECTION('',(1.,0.,-0.)); +#328041 = CYLINDRICAL_SURFACE('',#328042,0.7155); +#328042 = AXIS2_PLACEMENT_3D('',#328043,#328044,#328045); +#328043 = CARTESIAN_POINT('',(130.,-149.5,1.51)); +#328044 = DIRECTION('',(-0.,-0.,-1.)); +#328045 = DIRECTION('',(1.,0.,-0.)); +#328046 = ADVANCED_FACE('',(#328047,#328050),#328061,.F.); +#328047 = FACE_BOUND('',#328048,.F.); +#328048 = EDGE_LOOP('',(#328049)); +#328049 = ORIENTED_EDGE('',*,*,#328035,.T.); +#328050 = FACE_BOUND('',#328051,.F.); +#328051 = EDGE_LOOP('',(#328052)); +#328052 = ORIENTED_EDGE('',*,*,#328053,.T.); +#328053 = EDGE_CURVE('',#328054,#328054,#328056,.T.); +#328054 = VERTEX_POINT('',#328055); +#328055 = CARTESIAN_POINT('',(130.,-149.935,1.51)); +#328056 = CIRCLE('',#328057,0.435); +#328057 = AXIS2_PLACEMENT_3D('',#328058,#328059,#328060); +#328058 = CARTESIAN_POINT('',(130.,-149.5,1.51)); +#328059 = DIRECTION('',(-0.,0.,-1.)); +#328060 = DIRECTION('',(-0.,-1.,0.)); +#328061 = PLANE('',#328062); +#328062 = AXIS2_PLACEMENT_3D('',#328063,#328064,#328065); +#328063 = CARTESIAN_POINT('',(0.,0.,1.51)); +#328064 = DIRECTION('',(0.,0.,1.)); +#328065 = DIRECTION('',(1.,0.,-0.)); +#328066 = ADVANCED_FACE('',(#328067,#328070),#328081,.T.); +#328067 = FACE_BOUND('',#328068,.T.); +#328068 = EDGE_LOOP('',(#328069)); +#328069 = ORIENTED_EDGE('',*,*,#328027,.T.); +#328070 = FACE_BOUND('',#328071,.T.); +#328071 = EDGE_LOOP('',(#328072)); +#328072 = ORIENTED_EDGE('',*,*,#328073,.T.); +#328073 = EDGE_CURVE('',#328074,#328074,#328076,.T.); +#328074 = VERTEX_POINT('',#328075); +#328075 = CARTESIAN_POINT('',(130.,-149.935,1.55)); +#328076 = CIRCLE('',#328077,0.435); +#328077 = AXIS2_PLACEMENT_3D('',#328078,#328079,#328080); +#328078 = CARTESIAN_POINT('',(130.,-149.5,1.55)); +#328079 = DIRECTION('',(-0.,0.,-1.)); +#328080 = DIRECTION('',(-0.,-1.,0.)); +#328081 = PLANE('',#328082); +#328082 = AXIS2_PLACEMENT_3D('',#328083,#328084,#328085); +#328083 = CARTESIAN_POINT('',(0.,0.,1.55)); +#328084 = DIRECTION('',(0.,0.,1.)); +#328085 = DIRECTION('',(1.,0.,-0.)); +#328086 = ADVANCED_FACE('',(#328087),#328098,.F.); +#328087 = FACE_BOUND('',#328088,.T.); +#328088 = EDGE_LOOP('',(#328089,#328090,#328096,#328097)); +#328089 = ORIENTED_EDGE('',*,*,#328053,.T.); +#328090 = ORIENTED_EDGE('',*,*,#328091,.T.); +#328091 = EDGE_CURVE('',#328054,#328074,#328092,.T.); +#328092 = LINE('',#328093,#328094); +#328093 = CARTESIAN_POINT('',(130.,-149.935,-4.6E-02)); +#328094 = VECTOR('',#328095,1.); +#328095 = DIRECTION('',(0.,0.,1.)); +#328096 = ORIENTED_EDGE('',*,*,#328073,.F.); +#328097 = ORIENTED_EDGE('',*,*,#328091,.F.); +#328098 = CYLINDRICAL_SURFACE('',#328099,0.435); +#328099 = AXIS2_PLACEMENT_3D('',#328100,#328101,#328102); +#328100 = CARTESIAN_POINT('',(130.,-149.5,-4.6E-02)); +#328101 = DIRECTION('',(-0.,-0.,-1.)); +#328102 = DIRECTION('',(-0.,-1.,0.)); +#328103 = MANIFOLD_SOLID_BREP('',#328104); +#328104 = CLOSED_SHELL('',(#328105,#328138,#328158,#328178)); +#328105 = ADVANCED_FACE('',(#328106),#328133,.T.); +#328106 = FACE_BOUND('',#328107,.T.); +#328107 = EDGE_LOOP('',(#328108,#328118,#328125,#328126)); +#328108 = ORIENTED_EDGE('',*,*,#328109,.T.); +#328109 = EDGE_CURVE('',#328110,#328112,#328114,.T.); +#328110 = VERTEX_POINT('',#328111); +#328111 = CARTESIAN_POINT('',(130.7155,-149.5,0.)); +#328112 = VERTEX_POINT('',#328113); +#328113 = CARTESIAN_POINT('',(130.7155,-149.5,-4.E-02)); +#328114 = LINE('',#328115,#328116); +#328115 = CARTESIAN_POINT('',(130.7155,-149.5,0.)); +#328116 = VECTOR('',#328117,1.); +#328117 = DIRECTION('',(0.,0.,-1.)); +#328118 = ORIENTED_EDGE('',*,*,#328119,.T.); +#328119 = EDGE_CURVE('',#328112,#328112,#328120,.T.); +#328120 = CIRCLE('',#328121,0.7155); +#328121 = AXIS2_PLACEMENT_3D('',#328122,#328123,#328124); +#328122 = CARTESIAN_POINT('',(130.,-149.5,-4.E-02)); +#328123 = DIRECTION('',(0.,0.,1.)); +#328124 = DIRECTION('',(1.,0.,-0.)); +#328125 = ORIENTED_EDGE('',*,*,#328109,.F.); +#328126 = ORIENTED_EDGE('',*,*,#328127,.F.); +#328127 = EDGE_CURVE('',#328110,#328110,#328128,.T.); +#328128 = CIRCLE('',#328129,0.7155); +#328129 = AXIS2_PLACEMENT_3D('',#328130,#328131,#328132); +#328130 = CARTESIAN_POINT('',(130.,-149.5,0.)); +#328131 = DIRECTION('',(0.,0.,1.)); +#328132 = DIRECTION('',(1.,0.,-0.)); +#328133 = CYLINDRICAL_SURFACE('',#328134,0.7155); +#328134 = AXIS2_PLACEMENT_3D('',#328135,#328136,#328137); +#328135 = CARTESIAN_POINT('',(130.,-149.5,0.)); +#328136 = DIRECTION('',(0.,0.,1.)); +#328137 = DIRECTION('',(1.,0.,-0.)); +#328138 = ADVANCED_FACE('',(#328139,#328142),#328153,.F.); +#328139 = FACE_BOUND('',#328140,.F.); +#328140 = EDGE_LOOP('',(#328141)); +#328141 = ORIENTED_EDGE('',*,*,#328127,.F.); +#328142 = FACE_BOUND('',#328143,.F.); +#328143 = EDGE_LOOP('',(#328144)); +#328144 = ORIENTED_EDGE('',*,*,#328145,.F.); +#328145 = EDGE_CURVE('',#328146,#328146,#328148,.T.); +#328146 = VERTEX_POINT('',#328147); +#328147 = CARTESIAN_POINT('',(130.,-149.935,0.)); +#328148 = CIRCLE('',#328149,0.435); +#328149 = AXIS2_PLACEMENT_3D('',#328150,#328151,#328152); +#328150 = CARTESIAN_POINT('',(130.,-149.5,0.)); +#328151 = DIRECTION('',(-0.,0.,-1.)); +#328152 = DIRECTION('',(-0.,-1.,0.)); +#328153 = PLANE('',#328154); +#328154 = AXIS2_PLACEMENT_3D('',#328155,#328156,#328157); +#328155 = CARTESIAN_POINT('',(0.,0.,0.)); +#328156 = DIRECTION('',(-0.,-0.,-1.)); +#328157 = DIRECTION('',(-1.,0.,0.)); +#328158 = ADVANCED_FACE('',(#328159,#328162),#328173,.T.); +#328159 = FACE_BOUND('',#328160,.T.); +#328160 = EDGE_LOOP('',(#328161)); +#328161 = ORIENTED_EDGE('',*,*,#328119,.F.); +#328162 = FACE_BOUND('',#328163,.T.); +#328163 = EDGE_LOOP('',(#328164)); +#328164 = ORIENTED_EDGE('',*,*,#328165,.F.); +#328165 = EDGE_CURVE('',#328166,#328166,#328168,.T.); +#328166 = VERTEX_POINT('',#328167); +#328167 = CARTESIAN_POINT('',(130.,-149.935,-4.E-02)); +#328168 = CIRCLE('',#328169,0.435); +#328169 = AXIS2_PLACEMENT_3D('',#328170,#328171,#328172); +#328170 = CARTESIAN_POINT('',(130.,-149.5,-4.E-02)); +#328171 = DIRECTION('',(-0.,0.,-1.)); +#328172 = DIRECTION('',(-0.,-1.,0.)); +#328173 = PLANE('',#328174); +#328174 = AXIS2_PLACEMENT_3D('',#328175,#328176,#328177); +#328175 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#328176 = DIRECTION('',(-0.,-0.,-1.)); +#328177 = DIRECTION('',(-1.,0.,0.)); +#328178 = ADVANCED_FACE('',(#328179),#328190,.F.); +#328179 = FACE_BOUND('',#328180,.T.); +#328180 = EDGE_LOOP('',(#328181,#328182,#328188,#328189)); +#328181 = ORIENTED_EDGE('',*,*,#328165,.T.); +#328182 = ORIENTED_EDGE('',*,*,#328183,.T.); +#328183 = EDGE_CURVE('',#328166,#328146,#328184,.T.); +#328184 = LINE('',#328185,#328186); +#328185 = CARTESIAN_POINT('',(130.,-149.935,-4.6E-02)); +#328186 = VECTOR('',#328187,1.); +#328187 = DIRECTION('',(0.,0.,1.)); +#328188 = ORIENTED_EDGE('',*,*,#328145,.F.); +#328189 = ORIENTED_EDGE('',*,*,#328183,.F.); +#328190 = CYLINDRICAL_SURFACE('',#328191,0.435); +#328191 = AXIS2_PLACEMENT_3D('',#328192,#328193,#328194); +#328192 = CARTESIAN_POINT('',(130.,-149.5,-4.6E-02)); +#328193 = DIRECTION('',(-0.,-0.,-1.)); +#328194 = DIRECTION('',(-0.,-1.,0.)); +#328195 = MANIFOLD_SOLID_BREP('',#328196); +#328196 = CLOSED_SHELL('',(#328197,#328230,#328250,#328270)); +#328197 = ADVANCED_FACE('',(#328198),#328225,.T.); +#328198 = FACE_BOUND('',#328199,.F.); +#328199 = EDGE_LOOP('',(#328200,#328210,#328217,#328218)); +#328200 = ORIENTED_EDGE('',*,*,#328201,.T.); +#328201 = EDGE_CURVE('',#328202,#328204,#328206,.T.); +#328202 = VERTEX_POINT('',#328203); +#328203 = CARTESIAN_POINT('',(130.,-149.96,-4.E-02)); +#328204 = VERTEX_POINT('',#328205); +#328205 = CARTESIAN_POINT('',(130.,-149.96,1.55)); +#328206 = LINE('',#328207,#328208); +#328207 = CARTESIAN_POINT('',(130.,-149.96,-4.E-02)); +#328208 = VECTOR('',#328209,1.); +#328209 = DIRECTION('',(0.,0.,1.)); +#328210 = ORIENTED_EDGE('',*,*,#328211,.T.); +#328211 = EDGE_CURVE('',#328204,#328204,#328212,.T.); +#328212 = CIRCLE('',#328213,0.46); +#328213 = AXIS2_PLACEMENT_3D('',#328214,#328215,#328216); +#328214 = CARTESIAN_POINT('',(130.,-149.5,1.55)); +#328215 = DIRECTION('',(0.,0.,1.)); +#328216 = DIRECTION('',(-0.,-1.,0.)); +#328217 = ORIENTED_EDGE('',*,*,#328201,.F.); +#328218 = ORIENTED_EDGE('',*,*,#328219,.F.); +#328219 = EDGE_CURVE('',#328202,#328202,#328220,.T.); +#328220 = CIRCLE('',#328221,0.46); +#328221 = AXIS2_PLACEMENT_3D('',#328222,#328223,#328224); +#328222 = CARTESIAN_POINT('',(130.,-149.5,-4.E-02)); +#328223 = DIRECTION('',(0.,0.,1.)); +#328224 = DIRECTION('',(-0.,-1.,0.)); +#328225 = CYLINDRICAL_SURFACE('',#328226,0.46); +#328226 = AXIS2_PLACEMENT_3D('',#328227,#328228,#328229); +#328227 = CARTESIAN_POINT('',(130.,-149.5,-4.E-02)); +#328228 = DIRECTION('',(-0.,-0.,-1.)); +#328229 = DIRECTION('',(-0.,-1.,0.)); +#328230 = ADVANCED_FACE('',(#328231,#328234),#328245,.F.); +#328231 = FACE_BOUND('',#328232,.F.); +#328232 = EDGE_LOOP('',(#328233)); +#328233 = ORIENTED_EDGE('',*,*,#328219,.T.); +#328234 = FACE_BOUND('',#328235,.F.); +#328235 = EDGE_LOOP('',(#328236)); +#328236 = ORIENTED_EDGE('',*,*,#328237,.T.); +#328237 = EDGE_CURVE('',#328238,#328238,#328240,.T.); +#328238 = VERTEX_POINT('',#328239); +#328239 = CARTESIAN_POINT('',(130.,-149.935,-4.E-02)); +#328240 = CIRCLE('',#328241,0.435); +#328241 = AXIS2_PLACEMENT_3D('',#328242,#328243,#328244); +#328242 = CARTESIAN_POINT('',(130.,-149.5,-4.E-02)); +#328243 = DIRECTION('',(-0.,0.,-1.)); +#328244 = DIRECTION('',(-0.,-1.,0.)); +#328245 = PLANE('',#328246); +#328246 = AXIS2_PLACEMENT_3D('',#328247,#328248,#328249); +#328247 = CARTESIAN_POINT('',(130.,-149.96,-4.E-02)); +#328248 = DIRECTION('',(0.,0.,1.)); +#328249 = DIRECTION('',(1.,0.,-0.)); +#328250 = ADVANCED_FACE('',(#328251,#328254),#328265,.T.); +#328251 = FACE_BOUND('',#328252,.T.); +#328252 = EDGE_LOOP('',(#328253)); +#328253 = ORIENTED_EDGE('',*,*,#328211,.T.); +#328254 = FACE_BOUND('',#328255,.T.); +#328255 = EDGE_LOOP('',(#328256)); +#328256 = ORIENTED_EDGE('',*,*,#328257,.T.); +#328257 = EDGE_CURVE('',#328258,#328258,#328260,.T.); +#328258 = VERTEX_POINT('',#328259); +#328259 = CARTESIAN_POINT('',(130.,-149.935,1.55)); +#328260 = CIRCLE('',#328261,0.435); +#328261 = AXIS2_PLACEMENT_3D('',#328262,#328263,#328264); +#328262 = CARTESIAN_POINT('',(130.,-149.5,1.55)); +#328263 = DIRECTION('',(-0.,0.,-1.)); +#328264 = DIRECTION('',(-0.,-1.,0.)); +#328265 = PLANE('',#328266); +#328266 = AXIS2_PLACEMENT_3D('',#328267,#328268,#328269); +#328267 = CARTESIAN_POINT('',(130.,-149.96,1.55)); +#328268 = DIRECTION('',(0.,0.,1.)); +#328269 = DIRECTION('',(1.,0.,-0.)); +#328270 = ADVANCED_FACE('',(#328271),#328282,.F.); +#328271 = FACE_BOUND('',#328272,.T.); +#328272 = EDGE_LOOP('',(#328273,#328274,#328280,#328281)); +#328273 = ORIENTED_EDGE('',*,*,#328237,.T.); +#328274 = ORIENTED_EDGE('',*,*,#328275,.T.); +#328275 = EDGE_CURVE('',#328238,#328258,#328276,.T.); +#328276 = LINE('',#328277,#328278); +#328277 = CARTESIAN_POINT('',(130.,-149.935,-4.6E-02)); +#328278 = VECTOR('',#328279,1.); +#328279 = DIRECTION('',(0.,0.,1.)); +#328280 = ORIENTED_EDGE('',*,*,#328257,.F.); +#328281 = ORIENTED_EDGE('',*,*,#328275,.F.); +#328282 = CYLINDRICAL_SURFACE('',#328283,0.435); +#328283 = AXIS2_PLACEMENT_3D('',#328284,#328285,#328286); +#328284 = CARTESIAN_POINT('',(130.,-149.5,-4.6E-02)); +#328285 = DIRECTION('',(-0.,-0.,-1.)); +#328286 = DIRECTION('',(-0.,-1.,0.)); +#328287 = MANIFOLD_SOLID_BREP('',#328288); +#328288 = CLOSED_SHELL('',(#328289,#328322,#328342,#328362)); +#328289 = ADVANCED_FACE('',(#328290),#328317,.T.); +#328290 = FACE_BOUND('',#328291,.F.); +#328291 = EDGE_LOOP('',(#328292,#328302,#328309,#328310)); +#328292 = ORIENTED_EDGE('',*,*,#328293,.T.); +#328293 = EDGE_CURVE('',#328294,#328296,#328298,.T.); +#328294 = VERTEX_POINT('',#328295); +#328295 = CARTESIAN_POINT('',(132.7155,-149.5,1.51)); +#328296 = VERTEX_POINT('',#328297); +#328297 = CARTESIAN_POINT('',(132.7155,-149.5,1.55)); +#328298 = LINE('',#328299,#328300); +#328299 = CARTESIAN_POINT('',(132.7155,-149.5,1.51)); +#328300 = VECTOR('',#328301,1.); +#328301 = DIRECTION('',(0.,0.,1.)); +#328302 = ORIENTED_EDGE('',*,*,#328303,.T.); +#328303 = EDGE_CURVE('',#328296,#328296,#328304,.T.); +#328304 = CIRCLE('',#328305,0.7155); +#328305 = AXIS2_PLACEMENT_3D('',#328306,#328307,#328308); +#328306 = CARTESIAN_POINT('',(132.,-149.5,1.55)); +#328307 = DIRECTION('',(0.,0.,1.)); +#328308 = DIRECTION('',(1.,0.,-0.)); +#328309 = ORIENTED_EDGE('',*,*,#328293,.F.); +#328310 = ORIENTED_EDGE('',*,*,#328311,.F.); +#328311 = EDGE_CURVE('',#328294,#328294,#328312,.T.); +#328312 = CIRCLE('',#328313,0.7155); +#328313 = AXIS2_PLACEMENT_3D('',#328314,#328315,#328316); +#328314 = CARTESIAN_POINT('',(132.,-149.5,1.51)); +#328315 = DIRECTION('',(0.,0.,1.)); +#328316 = DIRECTION('',(1.,0.,-0.)); +#328317 = CYLINDRICAL_SURFACE('',#328318,0.7155); +#328318 = AXIS2_PLACEMENT_3D('',#328319,#328320,#328321); +#328319 = CARTESIAN_POINT('',(132.,-149.5,1.51)); +#328320 = DIRECTION('',(-0.,-0.,-1.)); +#328321 = DIRECTION('',(1.,0.,-0.)); +#328322 = ADVANCED_FACE('',(#328323,#328326),#328337,.F.); +#328323 = FACE_BOUND('',#328324,.F.); +#328324 = EDGE_LOOP('',(#328325)); +#328325 = ORIENTED_EDGE('',*,*,#328311,.T.); +#328326 = FACE_BOUND('',#328327,.F.); +#328327 = EDGE_LOOP('',(#328328)); +#328328 = ORIENTED_EDGE('',*,*,#328329,.T.); +#328329 = EDGE_CURVE('',#328330,#328330,#328332,.T.); +#328330 = VERTEX_POINT('',#328331); +#328331 = CARTESIAN_POINT('',(132.,-149.935,1.51)); +#328332 = CIRCLE('',#328333,0.435); +#328333 = AXIS2_PLACEMENT_3D('',#328334,#328335,#328336); +#328334 = CARTESIAN_POINT('',(132.,-149.5,1.51)); +#328335 = DIRECTION('',(-0.,0.,-1.)); +#328336 = DIRECTION('',(-0.,-1.,0.)); +#328337 = PLANE('',#328338); +#328338 = AXIS2_PLACEMENT_3D('',#328339,#328340,#328341); +#328339 = CARTESIAN_POINT('',(0.,0.,1.51)); +#328340 = DIRECTION('',(0.,0.,1.)); +#328341 = DIRECTION('',(1.,0.,-0.)); +#328342 = ADVANCED_FACE('',(#328343,#328346),#328357,.T.); +#328343 = FACE_BOUND('',#328344,.T.); +#328344 = EDGE_LOOP('',(#328345)); +#328345 = ORIENTED_EDGE('',*,*,#328303,.T.); +#328346 = FACE_BOUND('',#328347,.T.); +#328347 = EDGE_LOOP('',(#328348)); +#328348 = ORIENTED_EDGE('',*,*,#328349,.T.); +#328349 = EDGE_CURVE('',#328350,#328350,#328352,.T.); +#328350 = VERTEX_POINT('',#328351); +#328351 = CARTESIAN_POINT('',(132.,-149.935,1.55)); +#328352 = CIRCLE('',#328353,0.435); +#328353 = AXIS2_PLACEMENT_3D('',#328354,#328355,#328356); +#328354 = CARTESIAN_POINT('',(132.,-149.5,1.55)); +#328355 = DIRECTION('',(-0.,0.,-1.)); +#328356 = DIRECTION('',(-0.,-1.,0.)); +#328357 = PLANE('',#328358); +#328358 = AXIS2_PLACEMENT_3D('',#328359,#328360,#328361); +#328359 = CARTESIAN_POINT('',(0.,0.,1.55)); +#328360 = DIRECTION('',(0.,0.,1.)); +#328361 = DIRECTION('',(1.,0.,-0.)); +#328362 = ADVANCED_FACE('',(#328363),#328374,.F.); +#328363 = FACE_BOUND('',#328364,.T.); +#328364 = EDGE_LOOP('',(#328365,#328366,#328372,#328373)); +#328365 = ORIENTED_EDGE('',*,*,#328329,.T.); +#328366 = ORIENTED_EDGE('',*,*,#328367,.T.); +#328367 = EDGE_CURVE('',#328330,#328350,#328368,.T.); +#328368 = LINE('',#328369,#328370); +#328369 = CARTESIAN_POINT('',(132.,-149.935,-4.6E-02)); +#328370 = VECTOR('',#328371,1.); +#328371 = DIRECTION('',(0.,0.,1.)); +#328372 = ORIENTED_EDGE('',*,*,#328349,.F.); +#328373 = ORIENTED_EDGE('',*,*,#328367,.F.); +#328374 = CYLINDRICAL_SURFACE('',#328375,0.435); +#328375 = AXIS2_PLACEMENT_3D('',#328376,#328377,#328378); +#328376 = CARTESIAN_POINT('',(132.,-149.5,-4.6E-02)); +#328377 = DIRECTION('',(-0.,-0.,-1.)); +#328378 = DIRECTION('',(-0.,-1.,0.)); +#328379 = MANIFOLD_SOLID_BREP('',#328380); +#328380 = CLOSED_SHELL('',(#328381,#328414,#328434,#328454)); +#328381 = ADVANCED_FACE('',(#328382),#328409,.T.); +#328382 = FACE_BOUND('',#328383,.T.); +#328383 = EDGE_LOOP('',(#328384,#328394,#328401,#328402)); +#328384 = ORIENTED_EDGE('',*,*,#328385,.T.); +#328385 = EDGE_CURVE('',#328386,#328388,#328390,.T.); +#328386 = VERTEX_POINT('',#328387); +#328387 = CARTESIAN_POINT('',(132.7155,-149.5,0.)); +#328388 = VERTEX_POINT('',#328389); +#328389 = CARTESIAN_POINT('',(132.7155,-149.5,-4.E-02)); +#328390 = LINE('',#328391,#328392); +#328391 = CARTESIAN_POINT('',(132.7155,-149.5,0.)); +#328392 = VECTOR('',#328393,1.); +#328393 = DIRECTION('',(0.,0.,-1.)); +#328394 = ORIENTED_EDGE('',*,*,#328395,.T.); +#328395 = EDGE_CURVE('',#328388,#328388,#328396,.T.); +#328396 = CIRCLE('',#328397,0.7155); +#328397 = AXIS2_PLACEMENT_3D('',#328398,#328399,#328400); +#328398 = CARTESIAN_POINT('',(132.,-149.5,-4.E-02)); +#328399 = DIRECTION('',(0.,0.,1.)); +#328400 = DIRECTION('',(1.,0.,-0.)); +#328401 = ORIENTED_EDGE('',*,*,#328385,.F.); +#328402 = ORIENTED_EDGE('',*,*,#328403,.F.); +#328403 = EDGE_CURVE('',#328386,#328386,#328404,.T.); +#328404 = CIRCLE('',#328405,0.7155); +#328405 = AXIS2_PLACEMENT_3D('',#328406,#328407,#328408); +#328406 = CARTESIAN_POINT('',(132.,-149.5,0.)); +#328407 = DIRECTION('',(0.,0.,1.)); +#328408 = DIRECTION('',(1.,0.,-0.)); +#328409 = CYLINDRICAL_SURFACE('',#328410,0.7155); +#328410 = AXIS2_PLACEMENT_3D('',#328411,#328412,#328413); +#328411 = CARTESIAN_POINT('',(132.,-149.5,0.)); +#328412 = DIRECTION('',(0.,0.,1.)); +#328413 = DIRECTION('',(1.,0.,-0.)); +#328414 = ADVANCED_FACE('',(#328415,#328418),#328429,.F.); +#328415 = FACE_BOUND('',#328416,.F.); +#328416 = EDGE_LOOP('',(#328417)); +#328417 = ORIENTED_EDGE('',*,*,#328403,.F.); +#328418 = FACE_BOUND('',#328419,.F.); +#328419 = EDGE_LOOP('',(#328420)); +#328420 = ORIENTED_EDGE('',*,*,#328421,.F.); +#328421 = EDGE_CURVE('',#328422,#328422,#328424,.T.); +#328422 = VERTEX_POINT('',#328423); +#328423 = CARTESIAN_POINT('',(132.,-149.935,0.)); +#328424 = CIRCLE('',#328425,0.435); +#328425 = AXIS2_PLACEMENT_3D('',#328426,#328427,#328428); +#328426 = CARTESIAN_POINT('',(132.,-149.5,0.)); +#328427 = DIRECTION('',(-0.,0.,-1.)); +#328428 = DIRECTION('',(-0.,-1.,0.)); +#328429 = PLANE('',#328430); +#328430 = AXIS2_PLACEMENT_3D('',#328431,#328432,#328433); +#328431 = CARTESIAN_POINT('',(0.,0.,0.)); +#328432 = DIRECTION('',(-0.,-0.,-1.)); +#328433 = DIRECTION('',(-1.,0.,0.)); +#328434 = ADVANCED_FACE('',(#328435,#328438),#328449,.T.); +#328435 = FACE_BOUND('',#328436,.T.); +#328436 = EDGE_LOOP('',(#328437)); +#328437 = ORIENTED_EDGE('',*,*,#328395,.F.); +#328438 = FACE_BOUND('',#328439,.T.); +#328439 = EDGE_LOOP('',(#328440)); +#328440 = ORIENTED_EDGE('',*,*,#328441,.F.); +#328441 = EDGE_CURVE('',#328442,#328442,#328444,.T.); +#328442 = VERTEX_POINT('',#328443); +#328443 = CARTESIAN_POINT('',(132.,-149.935,-4.E-02)); +#328444 = CIRCLE('',#328445,0.435); +#328445 = AXIS2_PLACEMENT_3D('',#328446,#328447,#328448); +#328446 = CARTESIAN_POINT('',(132.,-149.5,-4.E-02)); +#328447 = DIRECTION('',(-0.,0.,-1.)); +#328448 = DIRECTION('',(-0.,-1.,0.)); +#328449 = PLANE('',#328450); +#328450 = AXIS2_PLACEMENT_3D('',#328451,#328452,#328453); +#328451 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#328452 = DIRECTION('',(-0.,-0.,-1.)); +#328453 = DIRECTION('',(-1.,0.,0.)); +#328454 = ADVANCED_FACE('',(#328455),#328466,.F.); +#328455 = FACE_BOUND('',#328456,.T.); +#328456 = EDGE_LOOP('',(#328457,#328458,#328464,#328465)); +#328457 = ORIENTED_EDGE('',*,*,#328441,.T.); +#328458 = ORIENTED_EDGE('',*,*,#328459,.T.); +#328459 = EDGE_CURVE('',#328442,#328422,#328460,.T.); +#328460 = LINE('',#328461,#328462); +#328461 = CARTESIAN_POINT('',(132.,-149.935,-4.6E-02)); +#328462 = VECTOR('',#328463,1.); +#328463 = DIRECTION('',(0.,0.,1.)); +#328464 = ORIENTED_EDGE('',*,*,#328421,.F.); +#328465 = ORIENTED_EDGE('',*,*,#328459,.F.); +#328466 = CYLINDRICAL_SURFACE('',#328467,0.435); +#328467 = AXIS2_PLACEMENT_3D('',#328468,#328469,#328470); +#328468 = CARTESIAN_POINT('',(132.,-149.5,-4.6E-02)); +#328469 = DIRECTION('',(-0.,-0.,-1.)); +#328470 = DIRECTION('',(-0.,-1.,0.)); +#328471 = MANIFOLD_SOLID_BREP('',#328472); +#328472 = CLOSED_SHELL('',(#328473,#328506,#328526,#328546)); +#328473 = ADVANCED_FACE('',(#328474),#328501,.T.); +#328474 = FACE_BOUND('',#328475,.F.); +#328475 = EDGE_LOOP('',(#328476,#328486,#328493,#328494)); +#328476 = ORIENTED_EDGE('',*,*,#328477,.T.); +#328477 = EDGE_CURVE('',#328478,#328480,#328482,.T.); +#328478 = VERTEX_POINT('',#328479); +#328479 = CARTESIAN_POINT('',(132.,-149.96,-4.E-02)); +#328480 = VERTEX_POINT('',#328481); +#328481 = CARTESIAN_POINT('',(132.,-149.96,1.55)); +#328482 = LINE('',#328483,#328484); +#328483 = CARTESIAN_POINT('',(132.,-149.96,-4.E-02)); +#328484 = VECTOR('',#328485,1.); +#328485 = DIRECTION('',(0.,0.,1.)); +#328486 = ORIENTED_EDGE('',*,*,#328487,.T.); +#328487 = EDGE_CURVE('',#328480,#328480,#328488,.T.); +#328488 = CIRCLE('',#328489,0.46); +#328489 = AXIS2_PLACEMENT_3D('',#328490,#328491,#328492); +#328490 = CARTESIAN_POINT('',(132.,-149.5,1.55)); +#328491 = DIRECTION('',(0.,0.,1.)); +#328492 = DIRECTION('',(-0.,-1.,0.)); +#328493 = ORIENTED_EDGE('',*,*,#328477,.F.); +#328494 = ORIENTED_EDGE('',*,*,#328495,.F.); +#328495 = EDGE_CURVE('',#328478,#328478,#328496,.T.); +#328496 = CIRCLE('',#328497,0.46); +#328497 = AXIS2_PLACEMENT_3D('',#328498,#328499,#328500); +#328498 = CARTESIAN_POINT('',(132.,-149.5,-4.E-02)); +#328499 = DIRECTION('',(0.,0.,1.)); +#328500 = DIRECTION('',(-0.,-1.,0.)); +#328501 = CYLINDRICAL_SURFACE('',#328502,0.46); +#328502 = AXIS2_PLACEMENT_3D('',#328503,#328504,#328505); +#328503 = CARTESIAN_POINT('',(132.,-149.5,-4.E-02)); +#328504 = DIRECTION('',(-0.,-0.,-1.)); +#328505 = DIRECTION('',(-0.,-1.,0.)); +#328506 = ADVANCED_FACE('',(#328507,#328510),#328521,.F.); +#328507 = FACE_BOUND('',#328508,.F.); +#328508 = EDGE_LOOP('',(#328509)); +#328509 = ORIENTED_EDGE('',*,*,#328495,.T.); +#328510 = FACE_BOUND('',#328511,.F.); +#328511 = EDGE_LOOP('',(#328512)); +#328512 = ORIENTED_EDGE('',*,*,#328513,.T.); +#328513 = EDGE_CURVE('',#328514,#328514,#328516,.T.); +#328514 = VERTEX_POINT('',#328515); +#328515 = CARTESIAN_POINT('',(132.,-149.935,-4.E-02)); +#328516 = CIRCLE('',#328517,0.435); +#328517 = AXIS2_PLACEMENT_3D('',#328518,#328519,#328520); +#328518 = CARTESIAN_POINT('',(132.,-149.5,-4.E-02)); +#328519 = DIRECTION('',(-0.,0.,-1.)); +#328520 = DIRECTION('',(-0.,-1.,0.)); +#328521 = PLANE('',#328522); +#328522 = AXIS2_PLACEMENT_3D('',#328523,#328524,#328525); +#328523 = CARTESIAN_POINT('',(132.,-149.96,-4.E-02)); +#328524 = DIRECTION('',(0.,0.,1.)); +#328525 = DIRECTION('',(1.,0.,-0.)); +#328526 = ADVANCED_FACE('',(#328527,#328530),#328541,.T.); +#328527 = FACE_BOUND('',#328528,.T.); +#328528 = EDGE_LOOP('',(#328529)); +#328529 = ORIENTED_EDGE('',*,*,#328487,.T.); +#328530 = FACE_BOUND('',#328531,.T.); +#328531 = EDGE_LOOP('',(#328532)); +#328532 = ORIENTED_EDGE('',*,*,#328533,.T.); +#328533 = EDGE_CURVE('',#328534,#328534,#328536,.T.); +#328534 = VERTEX_POINT('',#328535); +#328535 = CARTESIAN_POINT('',(132.,-149.935,1.55)); +#328536 = CIRCLE('',#328537,0.435); +#328537 = AXIS2_PLACEMENT_3D('',#328538,#328539,#328540); +#328538 = CARTESIAN_POINT('',(132.,-149.5,1.55)); +#328539 = DIRECTION('',(-0.,0.,-1.)); +#328540 = DIRECTION('',(-0.,-1.,0.)); +#328541 = PLANE('',#328542); +#328542 = AXIS2_PLACEMENT_3D('',#328543,#328544,#328545); +#328543 = CARTESIAN_POINT('',(132.,-149.96,1.55)); +#328544 = DIRECTION('',(0.,0.,1.)); +#328545 = DIRECTION('',(1.,0.,-0.)); +#328546 = ADVANCED_FACE('',(#328547),#328558,.F.); +#328547 = FACE_BOUND('',#328548,.T.); +#328548 = EDGE_LOOP('',(#328549,#328550,#328556,#328557)); +#328549 = ORIENTED_EDGE('',*,*,#328513,.T.); +#328550 = ORIENTED_EDGE('',*,*,#328551,.T.); +#328551 = EDGE_CURVE('',#328514,#328534,#328552,.T.); +#328552 = LINE('',#328553,#328554); +#328553 = CARTESIAN_POINT('',(132.,-149.935,-4.6E-02)); +#328554 = VECTOR('',#328555,1.); +#328555 = DIRECTION('',(0.,0.,1.)); +#328556 = ORIENTED_EDGE('',*,*,#328533,.F.); +#328557 = ORIENTED_EDGE('',*,*,#328551,.F.); +#328558 = CYLINDRICAL_SURFACE('',#328559,0.435); +#328559 = AXIS2_PLACEMENT_3D('',#328560,#328561,#328562); +#328560 = CARTESIAN_POINT('',(132.,-149.5,-4.6E-02)); +#328561 = DIRECTION('',(-0.,-0.,-1.)); +#328562 = DIRECTION('',(-0.,-1.,0.)); +#328563 = MANIFOLD_SOLID_BREP('',#328564); +#328564 = CLOSED_SHELL('',(#328565,#328598,#328618,#328638)); +#328565 = ADVANCED_FACE('',(#328566),#328593,.T.); +#328566 = FACE_BOUND('',#328567,.F.); +#328567 = EDGE_LOOP('',(#328568,#328578,#328585,#328586)); +#328568 = ORIENTED_EDGE('',*,*,#328569,.T.); +#328569 = EDGE_CURVE('',#328570,#328572,#328574,.T.); +#328570 = VERTEX_POINT('',#328571); +#328571 = CARTESIAN_POINT('',(134.7155,-149.5,1.51)); +#328572 = VERTEX_POINT('',#328573); +#328573 = CARTESIAN_POINT('',(134.7155,-149.5,1.55)); +#328574 = LINE('',#328575,#328576); +#328575 = CARTESIAN_POINT('',(134.7155,-149.5,1.51)); +#328576 = VECTOR('',#328577,1.); +#328577 = DIRECTION('',(0.,0.,1.)); +#328578 = ORIENTED_EDGE('',*,*,#328579,.T.); +#328579 = EDGE_CURVE('',#328572,#328572,#328580,.T.); +#328580 = CIRCLE('',#328581,0.7155); +#328581 = AXIS2_PLACEMENT_3D('',#328582,#328583,#328584); +#328582 = CARTESIAN_POINT('',(134.,-149.5,1.55)); +#328583 = DIRECTION('',(0.,0.,1.)); +#328584 = DIRECTION('',(1.,0.,-0.)); +#328585 = ORIENTED_EDGE('',*,*,#328569,.F.); +#328586 = ORIENTED_EDGE('',*,*,#328587,.F.); +#328587 = EDGE_CURVE('',#328570,#328570,#328588,.T.); +#328588 = CIRCLE('',#328589,0.7155); +#328589 = AXIS2_PLACEMENT_3D('',#328590,#328591,#328592); +#328590 = CARTESIAN_POINT('',(134.,-149.5,1.51)); +#328591 = DIRECTION('',(0.,0.,1.)); +#328592 = DIRECTION('',(1.,0.,-0.)); +#328593 = CYLINDRICAL_SURFACE('',#328594,0.7155); +#328594 = AXIS2_PLACEMENT_3D('',#328595,#328596,#328597); +#328595 = CARTESIAN_POINT('',(134.,-149.5,1.51)); +#328596 = DIRECTION('',(-0.,-0.,-1.)); +#328597 = DIRECTION('',(1.,0.,-0.)); +#328598 = ADVANCED_FACE('',(#328599,#328602),#328613,.F.); +#328599 = FACE_BOUND('',#328600,.F.); +#328600 = EDGE_LOOP('',(#328601)); +#328601 = ORIENTED_EDGE('',*,*,#328587,.T.); +#328602 = FACE_BOUND('',#328603,.F.); +#328603 = EDGE_LOOP('',(#328604)); +#328604 = ORIENTED_EDGE('',*,*,#328605,.T.); +#328605 = EDGE_CURVE('',#328606,#328606,#328608,.T.); +#328606 = VERTEX_POINT('',#328607); +#328607 = CARTESIAN_POINT('',(134.,-149.935,1.51)); +#328608 = CIRCLE('',#328609,0.435); +#328609 = AXIS2_PLACEMENT_3D('',#328610,#328611,#328612); +#328610 = CARTESIAN_POINT('',(134.,-149.5,1.51)); +#328611 = DIRECTION('',(-0.,0.,-1.)); +#328612 = DIRECTION('',(-0.,-1.,0.)); +#328613 = PLANE('',#328614); +#328614 = AXIS2_PLACEMENT_3D('',#328615,#328616,#328617); +#328615 = CARTESIAN_POINT('',(0.,0.,1.51)); +#328616 = DIRECTION('',(0.,0.,1.)); +#328617 = DIRECTION('',(1.,0.,-0.)); +#328618 = ADVANCED_FACE('',(#328619,#328622),#328633,.T.); +#328619 = FACE_BOUND('',#328620,.T.); +#328620 = EDGE_LOOP('',(#328621)); +#328621 = ORIENTED_EDGE('',*,*,#328579,.T.); +#328622 = FACE_BOUND('',#328623,.T.); +#328623 = EDGE_LOOP('',(#328624)); +#328624 = ORIENTED_EDGE('',*,*,#328625,.T.); +#328625 = EDGE_CURVE('',#328626,#328626,#328628,.T.); +#328626 = VERTEX_POINT('',#328627); +#328627 = CARTESIAN_POINT('',(134.,-149.935,1.55)); +#328628 = CIRCLE('',#328629,0.435); +#328629 = AXIS2_PLACEMENT_3D('',#328630,#328631,#328632); +#328630 = CARTESIAN_POINT('',(134.,-149.5,1.55)); +#328631 = DIRECTION('',(-0.,0.,-1.)); +#328632 = DIRECTION('',(-0.,-1.,0.)); +#328633 = PLANE('',#328634); +#328634 = AXIS2_PLACEMENT_3D('',#328635,#328636,#328637); +#328635 = CARTESIAN_POINT('',(0.,0.,1.55)); +#328636 = DIRECTION('',(0.,0.,1.)); +#328637 = DIRECTION('',(1.,0.,-0.)); +#328638 = ADVANCED_FACE('',(#328639),#328650,.F.); +#328639 = FACE_BOUND('',#328640,.T.); +#328640 = EDGE_LOOP('',(#328641,#328642,#328648,#328649)); +#328641 = ORIENTED_EDGE('',*,*,#328605,.T.); +#328642 = ORIENTED_EDGE('',*,*,#328643,.T.); +#328643 = EDGE_CURVE('',#328606,#328626,#328644,.T.); +#328644 = LINE('',#328645,#328646); +#328645 = CARTESIAN_POINT('',(134.,-149.935,-4.6E-02)); +#328646 = VECTOR('',#328647,1.); +#328647 = DIRECTION('',(0.,0.,1.)); +#328648 = ORIENTED_EDGE('',*,*,#328625,.F.); +#328649 = ORIENTED_EDGE('',*,*,#328643,.F.); +#328650 = CYLINDRICAL_SURFACE('',#328651,0.435); +#328651 = AXIS2_PLACEMENT_3D('',#328652,#328653,#328654); +#328652 = CARTESIAN_POINT('',(134.,-149.5,-4.6E-02)); +#328653 = DIRECTION('',(-0.,-0.,-1.)); +#328654 = DIRECTION('',(-0.,-1.,0.)); +#328655 = MANIFOLD_SOLID_BREP('',#328656); +#328656 = CLOSED_SHELL('',(#328657,#328690,#328710,#328730)); +#328657 = ADVANCED_FACE('',(#328658),#328685,.T.); +#328658 = FACE_BOUND('',#328659,.T.); +#328659 = EDGE_LOOP('',(#328660,#328670,#328677,#328678)); +#328660 = ORIENTED_EDGE('',*,*,#328661,.T.); +#328661 = EDGE_CURVE('',#328662,#328664,#328666,.T.); +#328662 = VERTEX_POINT('',#328663); +#328663 = CARTESIAN_POINT('',(134.7155,-149.5,0.)); +#328664 = VERTEX_POINT('',#328665); +#328665 = CARTESIAN_POINT('',(134.7155,-149.5,-4.E-02)); +#328666 = LINE('',#328667,#328668); +#328667 = CARTESIAN_POINT('',(134.7155,-149.5,0.)); +#328668 = VECTOR('',#328669,1.); +#328669 = DIRECTION('',(0.,0.,-1.)); +#328670 = ORIENTED_EDGE('',*,*,#328671,.T.); +#328671 = EDGE_CURVE('',#328664,#328664,#328672,.T.); +#328672 = CIRCLE('',#328673,0.7155); +#328673 = AXIS2_PLACEMENT_3D('',#328674,#328675,#328676); +#328674 = CARTESIAN_POINT('',(134.,-149.5,-4.E-02)); +#328675 = DIRECTION('',(0.,0.,1.)); +#328676 = DIRECTION('',(1.,0.,-0.)); +#328677 = ORIENTED_EDGE('',*,*,#328661,.F.); +#328678 = ORIENTED_EDGE('',*,*,#328679,.F.); +#328679 = EDGE_CURVE('',#328662,#328662,#328680,.T.); +#328680 = CIRCLE('',#328681,0.7155); +#328681 = AXIS2_PLACEMENT_3D('',#328682,#328683,#328684); +#328682 = CARTESIAN_POINT('',(134.,-149.5,0.)); +#328683 = DIRECTION('',(0.,0.,1.)); +#328684 = DIRECTION('',(1.,0.,-0.)); +#328685 = CYLINDRICAL_SURFACE('',#328686,0.7155); +#328686 = AXIS2_PLACEMENT_3D('',#328687,#328688,#328689); +#328687 = CARTESIAN_POINT('',(134.,-149.5,0.)); +#328688 = DIRECTION('',(0.,0.,1.)); +#328689 = DIRECTION('',(1.,0.,-0.)); +#328690 = ADVANCED_FACE('',(#328691,#328694),#328705,.F.); +#328691 = FACE_BOUND('',#328692,.F.); +#328692 = EDGE_LOOP('',(#328693)); +#328693 = ORIENTED_EDGE('',*,*,#328679,.F.); +#328694 = FACE_BOUND('',#328695,.F.); +#328695 = EDGE_LOOP('',(#328696)); +#328696 = ORIENTED_EDGE('',*,*,#328697,.F.); +#328697 = EDGE_CURVE('',#328698,#328698,#328700,.T.); +#328698 = VERTEX_POINT('',#328699); +#328699 = CARTESIAN_POINT('',(134.,-149.935,0.)); +#328700 = CIRCLE('',#328701,0.435); +#328701 = AXIS2_PLACEMENT_3D('',#328702,#328703,#328704); +#328702 = CARTESIAN_POINT('',(134.,-149.5,0.)); +#328703 = DIRECTION('',(-0.,0.,-1.)); +#328704 = DIRECTION('',(-0.,-1.,0.)); +#328705 = PLANE('',#328706); +#328706 = AXIS2_PLACEMENT_3D('',#328707,#328708,#328709); +#328707 = CARTESIAN_POINT('',(0.,0.,0.)); +#328708 = DIRECTION('',(-0.,-0.,-1.)); +#328709 = DIRECTION('',(-1.,0.,0.)); +#328710 = ADVANCED_FACE('',(#328711,#328714),#328725,.T.); +#328711 = FACE_BOUND('',#328712,.T.); +#328712 = EDGE_LOOP('',(#328713)); +#328713 = ORIENTED_EDGE('',*,*,#328671,.F.); +#328714 = FACE_BOUND('',#328715,.T.); +#328715 = EDGE_LOOP('',(#328716)); +#328716 = ORIENTED_EDGE('',*,*,#328717,.F.); +#328717 = EDGE_CURVE('',#328718,#328718,#328720,.T.); +#328718 = VERTEX_POINT('',#328719); +#328719 = CARTESIAN_POINT('',(134.,-149.935,-4.E-02)); +#328720 = CIRCLE('',#328721,0.435); +#328721 = AXIS2_PLACEMENT_3D('',#328722,#328723,#328724); +#328722 = CARTESIAN_POINT('',(134.,-149.5,-4.E-02)); +#328723 = DIRECTION('',(-0.,0.,-1.)); +#328724 = DIRECTION('',(-0.,-1.,0.)); +#328725 = PLANE('',#328726); +#328726 = AXIS2_PLACEMENT_3D('',#328727,#328728,#328729); +#328727 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#328728 = DIRECTION('',(-0.,-0.,-1.)); +#328729 = DIRECTION('',(-1.,0.,0.)); +#328730 = ADVANCED_FACE('',(#328731),#328742,.F.); +#328731 = FACE_BOUND('',#328732,.T.); +#328732 = EDGE_LOOP('',(#328733,#328734,#328740,#328741)); +#328733 = ORIENTED_EDGE('',*,*,#328717,.T.); +#328734 = ORIENTED_EDGE('',*,*,#328735,.T.); +#328735 = EDGE_CURVE('',#328718,#328698,#328736,.T.); +#328736 = LINE('',#328737,#328738); +#328737 = CARTESIAN_POINT('',(134.,-149.935,-4.6E-02)); +#328738 = VECTOR('',#328739,1.); +#328739 = DIRECTION('',(0.,0.,1.)); +#328740 = ORIENTED_EDGE('',*,*,#328697,.F.); +#328741 = ORIENTED_EDGE('',*,*,#328735,.F.); +#328742 = CYLINDRICAL_SURFACE('',#328743,0.435); +#328743 = AXIS2_PLACEMENT_3D('',#328744,#328745,#328746); +#328744 = CARTESIAN_POINT('',(134.,-149.5,-4.6E-02)); +#328745 = DIRECTION('',(-0.,-0.,-1.)); +#328746 = DIRECTION('',(-0.,-1.,0.)); +#328747 = MANIFOLD_SOLID_BREP('',#328748); +#328748 = CLOSED_SHELL('',(#328749,#328782,#328802,#328822)); +#328749 = ADVANCED_FACE('',(#328750),#328777,.T.); +#328750 = FACE_BOUND('',#328751,.F.); +#328751 = EDGE_LOOP('',(#328752,#328762,#328769,#328770)); +#328752 = ORIENTED_EDGE('',*,*,#328753,.T.); +#328753 = EDGE_CURVE('',#328754,#328756,#328758,.T.); +#328754 = VERTEX_POINT('',#328755); +#328755 = CARTESIAN_POINT('',(134.,-149.96,-4.E-02)); +#328756 = VERTEX_POINT('',#328757); +#328757 = CARTESIAN_POINT('',(134.,-149.96,1.55)); +#328758 = LINE('',#328759,#328760); +#328759 = CARTESIAN_POINT('',(134.,-149.96,-4.E-02)); +#328760 = VECTOR('',#328761,1.); +#328761 = DIRECTION('',(0.,0.,1.)); +#328762 = ORIENTED_EDGE('',*,*,#328763,.T.); +#328763 = EDGE_CURVE('',#328756,#328756,#328764,.T.); +#328764 = CIRCLE('',#328765,0.46); +#328765 = AXIS2_PLACEMENT_3D('',#328766,#328767,#328768); +#328766 = CARTESIAN_POINT('',(134.,-149.5,1.55)); +#328767 = DIRECTION('',(0.,0.,1.)); +#328768 = DIRECTION('',(-0.,-1.,0.)); +#328769 = ORIENTED_EDGE('',*,*,#328753,.F.); +#328770 = ORIENTED_EDGE('',*,*,#328771,.F.); +#328771 = EDGE_CURVE('',#328754,#328754,#328772,.T.); +#328772 = CIRCLE('',#328773,0.46); +#328773 = AXIS2_PLACEMENT_3D('',#328774,#328775,#328776); +#328774 = CARTESIAN_POINT('',(134.,-149.5,-4.E-02)); +#328775 = DIRECTION('',(0.,0.,1.)); +#328776 = DIRECTION('',(-0.,-1.,0.)); +#328777 = CYLINDRICAL_SURFACE('',#328778,0.46); +#328778 = AXIS2_PLACEMENT_3D('',#328779,#328780,#328781); +#328779 = CARTESIAN_POINT('',(134.,-149.5,-4.E-02)); +#328780 = DIRECTION('',(-0.,-0.,-1.)); +#328781 = DIRECTION('',(-0.,-1.,0.)); +#328782 = ADVANCED_FACE('',(#328783,#328786),#328797,.F.); +#328783 = FACE_BOUND('',#328784,.F.); +#328784 = EDGE_LOOP('',(#328785)); +#328785 = ORIENTED_EDGE('',*,*,#328771,.T.); +#328786 = FACE_BOUND('',#328787,.F.); +#328787 = EDGE_LOOP('',(#328788)); +#328788 = ORIENTED_EDGE('',*,*,#328789,.T.); +#328789 = EDGE_CURVE('',#328790,#328790,#328792,.T.); +#328790 = VERTEX_POINT('',#328791); +#328791 = CARTESIAN_POINT('',(134.,-149.935,-4.E-02)); +#328792 = CIRCLE('',#328793,0.435); +#328793 = AXIS2_PLACEMENT_3D('',#328794,#328795,#328796); +#328794 = CARTESIAN_POINT('',(134.,-149.5,-4.E-02)); +#328795 = DIRECTION('',(-0.,0.,-1.)); +#328796 = DIRECTION('',(-0.,-1.,0.)); +#328797 = PLANE('',#328798); +#328798 = AXIS2_PLACEMENT_3D('',#328799,#328800,#328801); +#328799 = CARTESIAN_POINT('',(134.,-149.96,-4.E-02)); +#328800 = DIRECTION('',(0.,0.,1.)); +#328801 = DIRECTION('',(1.,0.,-0.)); +#328802 = ADVANCED_FACE('',(#328803,#328806),#328817,.T.); +#328803 = FACE_BOUND('',#328804,.T.); +#328804 = EDGE_LOOP('',(#328805)); +#328805 = ORIENTED_EDGE('',*,*,#328763,.T.); +#328806 = FACE_BOUND('',#328807,.T.); +#328807 = EDGE_LOOP('',(#328808)); +#328808 = ORIENTED_EDGE('',*,*,#328809,.T.); +#328809 = EDGE_CURVE('',#328810,#328810,#328812,.T.); +#328810 = VERTEX_POINT('',#328811); +#328811 = CARTESIAN_POINT('',(134.,-149.935,1.55)); +#328812 = CIRCLE('',#328813,0.435); +#328813 = AXIS2_PLACEMENT_3D('',#328814,#328815,#328816); +#328814 = CARTESIAN_POINT('',(134.,-149.5,1.55)); +#328815 = DIRECTION('',(-0.,0.,-1.)); +#328816 = DIRECTION('',(-0.,-1.,0.)); +#328817 = PLANE('',#328818); +#328818 = AXIS2_PLACEMENT_3D('',#328819,#328820,#328821); +#328819 = CARTESIAN_POINT('',(134.,-149.96,1.55)); +#328820 = DIRECTION('',(0.,0.,1.)); +#328821 = DIRECTION('',(1.,0.,-0.)); +#328822 = ADVANCED_FACE('',(#328823),#328834,.F.); +#328823 = FACE_BOUND('',#328824,.T.); +#328824 = EDGE_LOOP('',(#328825,#328826,#328832,#328833)); +#328825 = ORIENTED_EDGE('',*,*,#328789,.T.); +#328826 = ORIENTED_EDGE('',*,*,#328827,.T.); +#328827 = EDGE_CURVE('',#328790,#328810,#328828,.T.); +#328828 = LINE('',#328829,#328830); +#328829 = CARTESIAN_POINT('',(134.,-149.935,-4.6E-02)); +#328830 = VECTOR('',#328831,1.); +#328831 = DIRECTION('',(0.,0.,1.)); +#328832 = ORIENTED_EDGE('',*,*,#328809,.F.); +#328833 = ORIENTED_EDGE('',*,*,#328827,.F.); +#328834 = CYLINDRICAL_SURFACE('',#328835,0.435); +#328835 = AXIS2_PLACEMENT_3D('',#328836,#328837,#328838); +#328836 = CARTESIAN_POINT('',(134.,-149.5,-4.6E-02)); +#328837 = DIRECTION('',(-0.,-0.,-1.)); +#328838 = DIRECTION('',(-0.,-1.,0.)); +#328839 = MANIFOLD_SOLID_BREP('',#328840); +#328840 = CLOSED_SHELL('',(#328841,#328874,#328894,#328914)); +#328841 = ADVANCED_FACE('',(#328842),#328869,.T.); +#328842 = FACE_BOUND('',#328843,.F.); +#328843 = EDGE_LOOP('',(#328844,#328854,#328861,#328862)); +#328844 = ORIENTED_EDGE('',*,*,#328845,.T.); +#328845 = EDGE_CURVE('',#328846,#328848,#328850,.T.); +#328846 = VERTEX_POINT('',#328847); +#328847 = CARTESIAN_POINT('',(142.7155,-149.5,1.51)); +#328848 = VERTEX_POINT('',#328849); +#328849 = CARTESIAN_POINT('',(142.7155,-149.5,1.55)); +#328850 = LINE('',#328851,#328852); +#328851 = CARTESIAN_POINT('',(142.7155,-149.5,1.51)); +#328852 = VECTOR('',#328853,1.); +#328853 = DIRECTION('',(0.,0.,1.)); +#328854 = ORIENTED_EDGE('',*,*,#328855,.T.); +#328855 = EDGE_CURVE('',#328848,#328848,#328856,.T.); +#328856 = CIRCLE('',#328857,0.7155); +#328857 = AXIS2_PLACEMENT_3D('',#328858,#328859,#328860); +#328858 = CARTESIAN_POINT('',(142.,-149.5,1.55)); +#328859 = DIRECTION('',(0.,0.,1.)); +#328860 = DIRECTION('',(1.,0.,-0.)); +#328861 = ORIENTED_EDGE('',*,*,#328845,.F.); +#328862 = ORIENTED_EDGE('',*,*,#328863,.F.); +#328863 = EDGE_CURVE('',#328846,#328846,#328864,.T.); +#328864 = CIRCLE('',#328865,0.7155); +#328865 = AXIS2_PLACEMENT_3D('',#328866,#328867,#328868); +#328866 = CARTESIAN_POINT('',(142.,-149.5,1.51)); +#328867 = DIRECTION('',(0.,0.,1.)); +#328868 = DIRECTION('',(1.,0.,-0.)); +#328869 = CYLINDRICAL_SURFACE('',#328870,0.7155); +#328870 = AXIS2_PLACEMENT_3D('',#328871,#328872,#328873); +#328871 = CARTESIAN_POINT('',(142.,-149.5,1.51)); +#328872 = DIRECTION('',(-0.,-0.,-1.)); +#328873 = DIRECTION('',(1.,0.,-0.)); +#328874 = ADVANCED_FACE('',(#328875,#328878),#328889,.F.); +#328875 = FACE_BOUND('',#328876,.F.); +#328876 = EDGE_LOOP('',(#328877)); +#328877 = ORIENTED_EDGE('',*,*,#328863,.T.); +#328878 = FACE_BOUND('',#328879,.F.); +#328879 = EDGE_LOOP('',(#328880)); +#328880 = ORIENTED_EDGE('',*,*,#328881,.T.); +#328881 = EDGE_CURVE('',#328882,#328882,#328884,.T.); +#328882 = VERTEX_POINT('',#328883); +#328883 = CARTESIAN_POINT('',(142.,-149.935,1.51)); +#328884 = CIRCLE('',#328885,0.435); +#328885 = AXIS2_PLACEMENT_3D('',#328886,#328887,#328888); +#328886 = CARTESIAN_POINT('',(142.,-149.5,1.51)); +#328887 = DIRECTION('',(-0.,0.,-1.)); +#328888 = DIRECTION('',(-0.,-1.,0.)); +#328889 = PLANE('',#328890); +#328890 = AXIS2_PLACEMENT_3D('',#328891,#328892,#328893); +#328891 = CARTESIAN_POINT('',(0.,0.,1.51)); +#328892 = DIRECTION('',(0.,0.,1.)); +#328893 = DIRECTION('',(1.,0.,-0.)); +#328894 = ADVANCED_FACE('',(#328895,#328898),#328909,.T.); +#328895 = FACE_BOUND('',#328896,.T.); +#328896 = EDGE_LOOP('',(#328897)); +#328897 = ORIENTED_EDGE('',*,*,#328855,.T.); +#328898 = FACE_BOUND('',#328899,.T.); +#328899 = EDGE_LOOP('',(#328900)); +#328900 = ORIENTED_EDGE('',*,*,#328901,.T.); +#328901 = EDGE_CURVE('',#328902,#328902,#328904,.T.); +#328902 = VERTEX_POINT('',#328903); +#328903 = CARTESIAN_POINT('',(142.,-149.935,1.55)); +#328904 = CIRCLE('',#328905,0.435); +#328905 = AXIS2_PLACEMENT_3D('',#328906,#328907,#328908); +#328906 = CARTESIAN_POINT('',(142.,-149.5,1.55)); +#328907 = DIRECTION('',(-0.,0.,-1.)); +#328908 = DIRECTION('',(-0.,-1.,0.)); +#328909 = PLANE('',#328910); +#328910 = AXIS2_PLACEMENT_3D('',#328911,#328912,#328913); +#328911 = CARTESIAN_POINT('',(0.,0.,1.55)); +#328912 = DIRECTION('',(0.,0.,1.)); +#328913 = DIRECTION('',(1.,0.,-0.)); +#328914 = ADVANCED_FACE('',(#328915),#328926,.F.); +#328915 = FACE_BOUND('',#328916,.T.); +#328916 = EDGE_LOOP('',(#328917,#328918,#328924,#328925)); +#328917 = ORIENTED_EDGE('',*,*,#328881,.T.); +#328918 = ORIENTED_EDGE('',*,*,#328919,.T.); +#328919 = EDGE_CURVE('',#328882,#328902,#328920,.T.); +#328920 = LINE('',#328921,#328922); +#328921 = CARTESIAN_POINT('',(142.,-149.935,-4.6E-02)); +#328922 = VECTOR('',#328923,1.); +#328923 = DIRECTION('',(0.,0.,1.)); +#328924 = ORIENTED_EDGE('',*,*,#328901,.F.); +#328925 = ORIENTED_EDGE('',*,*,#328919,.F.); +#328926 = CYLINDRICAL_SURFACE('',#328927,0.435); +#328927 = AXIS2_PLACEMENT_3D('',#328928,#328929,#328930); +#328928 = CARTESIAN_POINT('',(142.,-149.5,-4.6E-02)); +#328929 = DIRECTION('',(-0.,-0.,-1.)); +#328930 = DIRECTION('',(-0.,-1.,0.)); +#328931 = MANIFOLD_SOLID_BREP('',#328932); +#328932 = CLOSED_SHELL('',(#328933,#328966,#328986,#329006)); +#328933 = ADVANCED_FACE('',(#328934),#328961,.T.); +#328934 = FACE_BOUND('',#328935,.T.); +#328935 = EDGE_LOOP('',(#328936,#328946,#328953,#328954)); +#328936 = ORIENTED_EDGE('',*,*,#328937,.T.); +#328937 = EDGE_CURVE('',#328938,#328940,#328942,.T.); +#328938 = VERTEX_POINT('',#328939); +#328939 = CARTESIAN_POINT('',(142.7155,-149.5,0.)); +#328940 = VERTEX_POINT('',#328941); +#328941 = CARTESIAN_POINT('',(142.7155,-149.5,-4.E-02)); +#328942 = LINE('',#328943,#328944); +#328943 = CARTESIAN_POINT('',(142.7155,-149.5,0.)); +#328944 = VECTOR('',#328945,1.); +#328945 = DIRECTION('',(0.,0.,-1.)); +#328946 = ORIENTED_EDGE('',*,*,#328947,.T.); +#328947 = EDGE_CURVE('',#328940,#328940,#328948,.T.); +#328948 = CIRCLE('',#328949,0.7155); +#328949 = AXIS2_PLACEMENT_3D('',#328950,#328951,#328952); +#328950 = CARTESIAN_POINT('',(142.,-149.5,-4.E-02)); +#328951 = DIRECTION('',(0.,0.,1.)); +#328952 = DIRECTION('',(1.,0.,-0.)); +#328953 = ORIENTED_EDGE('',*,*,#328937,.F.); +#328954 = ORIENTED_EDGE('',*,*,#328955,.F.); +#328955 = EDGE_CURVE('',#328938,#328938,#328956,.T.); +#328956 = CIRCLE('',#328957,0.7155); +#328957 = AXIS2_PLACEMENT_3D('',#328958,#328959,#328960); +#328958 = CARTESIAN_POINT('',(142.,-149.5,0.)); +#328959 = DIRECTION('',(0.,0.,1.)); +#328960 = DIRECTION('',(1.,0.,-0.)); +#328961 = CYLINDRICAL_SURFACE('',#328962,0.7155); +#328962 = AXIS2_PLACEMENT_3D('',#328963,#328964,#328965); +#328963 = CARTESIAN_POINT('',(142.,-149.5,0.)); +#328964 = DIRECTION('',(0.,0.,1.)); +#328965 = DIRECTION('',(1.,0.,-0.)); +#328966 = ADVANCED_FACE('',(#328967,#328970),#328981,.F.); +#328967 = FACE_BOUND('',#328968,.F.); +#328968 = EDGE_LOOP('',(#328969)); +#328969 = ORIENTED_EDGE('',*,*,#328955,.F.); +#328970 = FACE_BOUND('',#328971,.F.); +#328971 = EDGE_LOOP('',(#328972)); +#328972 = ORIENTED_EDGE('',*,*,#328973,.F.); +#328973 = EDGE_CURVE('',#328974,#328974,#328976,.T.); +#328974 = VERTEX_POINT('',#328975); +#328975 = CARTESIAN_POINT('',(142.,-149.935,0.)); +#328976 = CIRCLE('',#328977,0.435); +#328977 = AXIS2_PLACEMENT_3D('',#328978,#328979,#328980); +#328978 = CARTESIAN_POINT('',(142.,-149.5,0.)); +#328979 = DIRECTION('',(-0.,0.,-1.)); +#328980 = DIRECTION('',(-0.,-1.,0.)); +#328981 = PLANE('',#328982); +#328982 = AXIS2_PLACEMENT_3D('',#328983,#328984,#328985); +#328983 = CARTESIAN_POINT('',(0.,0.,0.)); +#328984 = DIRECTION('',(-0.,-0.,-1.)); +#328985 = DIRECTION('',(-1.,0.,0.)); +#328986 = ADVANCED_FACE('',(#328987,#328990),#329001,.T.); +#328987 = FACE_BOUND('',#328988,.T.); +#328988 = EDGE_LOOP('',(#328989)); +#328989 = ORIENTED_EDGE('',*,*,#328947,.F.); +#328990 = FACE_BOUND('',#328991,.T.); +#328991 = EDGE_LOOP('',(#328992)); +#328992 = ORIENTED_EDGE('',*,*,#328993,.F.); +#328993 = EDGE_CURVE('',#328994,#328994,#328996,.T.); +#328994 = VERTEX_POINT('',#328995); +#328995 = CARTESIAN_POINT('',(142.,-149.935,-4.E-02)); +#328996 = CIRCLE('',#328997,0.435); +#328997 = AXIS2_PLACEMENT_3D('',#328998,#328999,#329000); +#328998 = CARTESIAN_POINT('',(142.,-149.5,-4.E-02)); +#328999 = DIRECTION('',(-0.,0.,-1.)); +#329000 = DIRECTION('',(-0.,-1.,0.)); +#329001 = PLANE('',#329002); +#329002 = AXIS2_PLACEMENT_3D('',#329003,#329004,#329005); +#329003 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#329004 = DIRECTION('',(-0.,-0.,-1.)); +#329005 = DIRECTION('',(-1.,0.,0.)); +#329006 = ADVANCED_FACE('',(#329007),#329018,.F.); +#329007 = FACE_BOUND('',#329008,.T.); +#329008 = EDGE_LOOP('',(#329009,#329010,#329016,#329017)); +#329009 = ORIENTED_EDGE('',*,*,#328993,.T.); +#329010 = ORIENTED_EDGE('',*,*,#329011,.T.); +#329011 = EDGE_CURVE('',#328994,#328974,#329012,.T.); +#329012 = LINE('',#329013,#329014); +#329013 = CARTESIAN_POINT('',(142.,-149.935,-4.6E-02)); +#329014 = VECTOR('',#329015,1.); +#329015 = DIRECTION('',(0.,0.,1.)); +#329016 = ORIENTED_EDGE('',*,*,#328973,.F.); +#329017 = ORIENTED_EDGE('',*,*,#329011,.F.); +#329018 = CYLINDRICAL_SURFACE('',#329019,0.435); +#329019 = AXIS2_PLACEMENT_3D('',#329020,#329021,#329022); +#329020 = CARTESIAN_POINT('',(142.,-149.5,-4.6E-02)); +#329021 = DIRECTION('',(-0.,-0.,-1.)); +#329022 = DIRECTION('',(-0.,-1.,0.)); +#329023 = MANIFOLD_SOLID_BREP('',#329024); +#329024 = CLOSED_SHELL('',(#329025,#329058,#329078,#329098)); +#329025 = ADVANCED_FACE('',(#329026),#329053,.T.); +#329026 = FACE_BOUND('',#329027,.F.); +#329027 = EDGE_LOOP('',(#329028,#329038,#329045,#329046)); +#329028 = ORIENTED_EDGE('',*,*,#329029,.T.); +#329029 = EDGE_CURVE('',#329030,#329032,#329034,.T.); +#329030 = VERTEX_POINT('',#329031); +#329031 = CARTESIAN_POINT('',(142.,-149.96,-4.E-02)); +#329032 = VERTEX_POINT('',#329033); +#329033 = CARTESIAN_POINT('',(142.,-149.96,1.55)); +#329034 = LINE('',#329035,#329036); +#329035 = CARTESIAN_POINT('',(142.,-149.96,-4.E-02)); +#329036 = VECTOR('',#329037,1.); +#329037 = DIRECTION('',(0.,0.,1.)); +#329038 = ORIENTED_EDGE('',*,*,#329039,.T.); +#329039 = EDGE_CURVE('',#329032,#329032,#329040,.T.); +#329040 = CIRCLE('',#329041,0.46); +#329041 = AXIS2_PLACEMENT_3D('',#329042,#329043,#329044); +#329042 = CARTESIAN_POINT('',(142.,-149.5,1.55)); +#329043 = DIRECTION('',(0.,0.,1.)); +#329044 = DIRECTION('',(-0.,-1.,0.)); +#329045 = ORIENTED_EDGE('',*,*,#329029,.F.); +#329046 = ORIENTED_EDGE('',*,*,#329047,.F.); +#329047 = EDGE_CURVE('',#329030,#329030,#329048,.T.); +#329048 = CIRCLE('',#329049,0.46); +#329049 = AXIS2_PLACEMENT_3D('',#329050,#329051,#329052); +#329050 = CARTESIAN_POINT('',(142.,-149.5,-4.E-02)); +#329051 = DIRECTION('',(0.,0.,1.)); +#329052 = DIRECTION('',(-0.,-1.,0.)); +#329053 = CYLINDRICAL_SURFACE('',#329054,0.46); +#329054 = AXIS2_PLACEMENT_3D('',#329055,#329056,#329057); +#329055 = CARTESIAN_POINT('',(142.,-149.5,-4.E-02)); +#329056 = DIRECTION('',(-0.,-0.,-1.)); +#329057 = DIRECTION('',(-0.,-1.,0.)); +#329058 = ADVANCED_FACE('',(#329059,#329062),#329073,.F.); +#329059 = FACE_BOUND('',#329060,.F.); +#329060 = EDGE_LOOP('',(#329061)); +#329061 = ORIENTED_EDGE('',*,*,#329047,.T.); +#329062 = FACE_BOUND('',#329063,.F.); +#329063 = EDGE_LOOP('',(#329064)); +#329064 = ORIENTED_EDGE('',*,*,#329065,.T.); +#329065 = EDGE_CURVE('',#329066,#329066,#329068,.T.); +#329066 = VERTEX_POINT('',#329067); +#329067 = CARTESIAN_POINT('',(142.,-149.935,-4.E-02)); +#329068 = CIRCLE('',#329069,0.435); +#329069 = AXIS2_PLACEMENT_3D('',#329070,#329071,#329072); +#329070 = CARTESIAN_POINT('',(142.,-149.5,-4.E-02)); +#329071 = DIRECTION('',(-0.,0.,-1.)); +#329072 = DIRECTION('',(-0.,-1.,0.)); +#329073 = PLANE('',#329074); +#329074 = AXIS2_PLACEMENT_3D('',#329075,#329076,#329077); +#329075 = CARTESIAN_POINT('',(142.,-149.96,-4.E-02)); +#329076 = DIRECTION('',(0.,0.,1.)); +#329077 = DIRECTION('',(1.,0.,-0.)); +#329078 = ADVANCED_FACE('',(#329079,#329082),#329093,.T.); +#329079 = FACE_BOUND('',#329080,.T.); +#329080 = EDGE_LOOP('',(#329081)); +#329081 = ORIENTED_EDGE('',*,*,#329039,.T.); +#329082 = FACE_BOUND('',#329083,.T.); +#329083 = EDGE_LOOP('',(#329084)); +#329084 = ORIENTED_EDGE('',*,*,#329085,.T.); +#329085 = EDGE_CURVE('',#329086,#329086,#329088,.T.); +#329086 = VERTEX_POINT('',#329087); +#329087 = CARTESIAN_POINT('',(142.,-149.935,1.55)); +#329088 = CIRCLE('',#329089,0.435); +#329089 = AXIS2_PLACEMENT_3D('',#329090,#329091,#329092); +#329090 = CARTESIAN_POINT('',(142.,-149.5,1.55)); +#329091 = DIRECTION('',(-0.,0.,-1.)); +#329092 = DIRECTION('',(-0.,-1.,0.)); +#329093 = PLANE('',#329094); +#329094 = AXIS2_PLACEMENT_3D('',#329095,#329096,#329097); +#329095 = CARTESIAN_POINT('',(142.,-149.96,1.55)); +#329096 = DIRECTION('',(0.,0.,1.)); +#329097 = DIRECTION('',(1.,0.,-0.)); +#329098 = ADVANCED_FACE('',(#329099),#329110,.F.); +#329099 = FACE_BOUND('',#329100,.T.); +#329100 = EDGE_LOOP('',(#329101,#329102,#329108,#329109)); +#329101 = ORIENTED_EDGE('',*,*,#329065,.T.); +#329102 = ORIENTED_EDGE('',*,*,#329103,.T.); +#329103 = EDGE_CURVE('',#329066,#329086,#329104,.T.); +#329104 = LINE('',#329105,#329106); +#329105 = CARTESIAN_POINT('',(142.,-149.935,-4.6E-02)); +#329106 = VECTOR('',#329107,1.); +#329107 = DIRECTION('',(0.,0.,1.)); +#329108 = ORIENTED_EDGE('',*,*,#329085,.F.); +#329109 = ORIENTED_EDGE('',*,*,#329103,.F.); +#329110 = CYLINDRICAL_SURFACE('',#329111,0.435); +#329111 = AXIS2_PLACEMENT_3D('',#329112,#329113,#329114); +#329112 = CARTESIAN_POINT('',(142.,-149.5,-4.6E-02)); +#329113 = DIRECTION('',(-0.,-0.,-1.)); +#329114 = DIRECTION('',(-0.,-1.,0.)); +#329115 = MANIFOLD_SOLID_BREP('',#329116); +#329116 = CLOSED_SHELL('',(#329117,#329159,#329190,#329223,#329254, + #329287,#329318,#329351,#329373,#329389)); +#329117 = ADVANCED_FACE('',(#329118),#329154,.T.); +#329118 = FACE_BOUND('',#329119,.T.); +#329119 = EDGE_LOOP('',(#329120,#329130,#329139,#329147)); +#329120 = ORIENTED_EDGE('',*,*,#329121,.T.); +#329121 = EDGE_CURVE('',#329122,#329124,#329126,.T.); +#329122 = VERTEX_POINT('',#329123); +#329123 = CARTESIAN_POINT('',(152.55,-60.475,1.51)); +#329124 = VERTEX_POINT('',#329125); +#329125 = CARTESIAN_POINT('',(152.55,-60.475,1.55)); +#329126 = LINE('',#329127,#329128); +#329127 = CARTESIAN_POINT('',(152.55,-60.475,1.51)); +#329128 = VECTOR('',#329129,1.); +#329129 = DIRECTION('',(0.,0.,1.)); +#329130 = ORIENTED_EDGE('',*,*,#329131,.T.); +#329131 = EDGE_CURVE('',#329124,#329132,#329134,.T.); +#329132 = VERTEX_POINT('',#329133); +#329133 = CARTESIAN_POINT('',(152.775,-60.25,1.55)); +#329134 = CIRCLE('',#329135,0.225000087974); +#329135 = AXIS2_PLACEMENT_3D('',#329136,#329137,#329138); +#329136 = CARTESIAN_POINT('',(152.77500008797,-60.47500008797,1.55)); +#329137 = DIRECTION('',(0.,0.,-1.)); +#329138 = DIRECTION('',(-1.,3.909952510777E-07,0.)); +#329139 = ORIENTED_EDGE('',*,*,#329140,.F.); +#329140 = EDGE_CURVE('',#329141,#329132,#329143,.T.); +#329141 = VERTEX_POINT('',#329142); +#329142 = CARTESIAN_POINT('',(152.775,-60.25,1.51)); +#329143 = LINE('',#329144,#329145); +#329144 = CARTESIAN_POINT('',(152.775,-60.25,1.51)); +#329145 = VECTOR('',#329146,1.); +#329146 = DIRECTION('',(0.,0.,1.)); +#329147 = ORIENTED_EDGE('',*,*,#329148,.F.); +#329148 = EDGE_CURVE('',#329122,#329141,#329149,.T.); +#329149 = CIRCLE('',#329150,0.225000087974); +#329150 = AXIS2_PLACEMENT_3D('',#329151,#329152,#329153); +#329151 = CARTESIAN_POINT('',(152.77500008797,-60.47500008797,1.51)); +#329152 = DIRECTION('',(0.,0.,-1.)); +#329153 = DIRECTION('',(-1.,3.909952510777E-07,0.)); +#329154 = CYLINDRICAL_SURFACE('',#329155,0.225000087974); +#329155 = AXIS2_PLACEMENT_3D('',#329156,#329157,#329158); +#329156 = CARTESIAN_POINT('',(152.77500008797,-60.47500008797,1.51)); +#329157 = DIRECTION('',(0.,0.,-1.)); +#329158 = DIRECTION('',(-1.,3.909952510777E-07,0.)); +#329159 = ADVANCED_FACE('',(#329160),#329185,.T.); +#329160 = FACE_BOUND('',#329161,.T.); +#329161 = EDGE_LOOP('',(#329162,#329163,#329171,#329179)); +#329162 = ORIENTED_EDGE('',*,*,#329140,.T.); +#329163 = ORIENTED_EDGE('',*,*,#329164,.T.); +#329164 = EDGE_CURVE('',#329132,#329165,#329167,.T.); +#329165 = VERTEX_POINT('',#329166); +#329166 = CARTESIAN_POINT('',(153.625,-60.25,1.55)); +#329167 = LINE('',#329168,#329169); +#329168 = CARTESIAN_POINT('',(152.775,-60.25,1.55)); +#329169 = VECTOR('',#329170,1.); +#329170 = DIRECTION('',(1.,0.,0.)); +#329171 = ORIENTED_EDGE('',*,*,#329172,.F.); +#329172 = EDGE_CURVE('',#329173,#329165,#329175,.T.); +#329173 = VERTEX_POINT('',#329174); +#329174 = CARTESIAN_POINT('',(153.625,-60.25,1.51)); +#329175 = LINE('',#329176,#329177); +#329176 = CARTESIAN_POINT('',(153.625,-60.25,1.51)); +#329177 = VECTOR('',#329178,1.); +#329178 = DIRECTION('',(0.,0.,1.)); +#329179 = ORIENTED_EDGE('',*,*,#329180,.F.); +#329180 = EDGE_CURVE('',#329141,#329173,#329181,.T.); +#329181 = LINE('',#329182,#329183); +#329182 = CARTESIAN_POINT('',(152.775,-60.25,1.51)); +#329183 = VECTOR('',#329184,1.); +#329184 = DIRECTION('',(1.,0.,0.)); +#329185 = PLANE('',#329186); +#329186 = AXIS2_PLACEMENT_3D('',#329187,#329188,#329189); +#329187 = CARTESIAN_POINT('',(152.775,-60.25,1.51)); +#329188 = DIRECTION('',(0.,1.,0.)); +#329189 = DIRECTION('',(1.,0.,0.)); +#329190 = ADVANCED_FACE('',(#329191),#329218,.T.); +#329191 = FACE_BOUND('',#329192,.T.); +#329192 = EDGE_LOOP('',(#329193,#329194,#329203,#329211)); +#329193 = ORIENTED_EDGE('',*,*,#329172,.T.); +#329194 = ORIENTED_EDGE('',*,*,#329195,.T.); +#329195 = EDGE_CURVE('',#329165,#329196,#329198,.T.); +#329196 = VERTEX_POINT('',#329197); +#329197 = CARTESIAN_POINT('',(153.85,-60.475,1.55)); +#329198 = CIRCLE('',#329199,0.225000087974); +#329199 = AXIS2_PLACEMENT_3D('',#329200,#329201,#329202); +#329200 = CARTESIAN_POINT('',(153.62499991202,-60.47500008797,1.55)); +#329201 = DIRECTION('',(0.,0.,-1.)); +#329202 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329203 = ORIENTED_EDGE('',*,*,#329204,.F.); +#329204 = EDGE_CURVE('',#329205,#329196,#329207,.T.); +#329205 = VERTEX_POINT('',#329206); +#329206 = CARTESIAN_POINT('',(153.85,-60.475,1.51)); +#329207 = LINE('',#329208,#329209); +#329208 = CARTESIAN_POINT('',(153.85,-60.475,1.51)); +#329209 = VECTOR('',#329210,1.); +#329210 = DIRECTION('',(0.,0.,1.)); +#329211 = ORIENTED_EDGE('',*,*,#329212,.F.); +#329212 = EDGE_CURVE('',#329173,#329205,#329213,.T.); +#329213 = CIRCLE('',#329214,0.225000087974); +#329214 = AXIS2_PLACEMENT_3D('',#329215,#329216,#329217); +#329215 = CARTESIAN_POINT('',(153.62499991202,-60.47500008797,1.51)); +#329216 = DIRECTION('',(0.,0.,-1.)); +#329217 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329218 = CYLINDRICAL_SURFACE('',#329219,0.225000087974); +#329219 = AXIS2_PLACEMENT_3D('',#329220,#329221,#329222); +#329220 = CARTESIAN_POINT('',(153.62499991202,-60.47500008797,1.51)); +#329221 = DIRECTION('',(0.,0.,-1.)); +#329222 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329223 = ADVANCED_FACE('',(#329224),#329249,.T.); +#329224 = FACE_BOUND('',#329225,.T.); +#329225 = EDGE_LOOP('',(#329226,#329227,#329235,#329243)); +#329226 = ORIENTED_EDGE('',*,*,#329204,.T.); +#329227 = ORIENTED_EDGE('',*,*,#329228,.T.); +#329228 = EDGE_CURVE('',#329196,#329229,#329231,.T.); +#329229 = VERTEX_POINT('',#329230); +#329230 = CARTESIAN_POINT('',(153.85,-60.925,1.55)); +#329231 = LINE('',#329232,#329233); +#329232 = CARTESIAN_POINT('',(153.85,-60.475,1.55)); +#329233 = VECTOR('',#329234,1.); +#329234 = DIRECTION('',(0.,-1.,0.)); +#329235 = ORIENTED_EDGE('',*,*,#329236,.F.); +#329236 = EDGE_CURVE('',#329237,#329229,#329239,.T.); +#329237 = VERTEX_POINT('',#329238); +#329238 = CARTESIAN_POINT('',(153.85,-60.925,1.51)); +#329239 = LINE('',#329240,#329241); +#329240 = CARTESIAN_POINT('',(153.85,-60.925,1.51)); +#329241 = VECTOR('',#329242,1.); +#329242 = DIRECTION('',(0.,0.,1.)); +#329243 = ORIENTED_EDGE('',*,*,#329244,.F.); +#329244 = EDGE_CURVE('',#329205,#329237,#329245,.T.); +#329245 = LINE('',#329246,#329247); +#329246 = CARTESIAN_POINT('',(153.85,-60.475,1.51)); +#329247 = VECTOR('',#329248,1.); +#329248 = DIRECTION('',(0.,-1.,0.)); +#329249 = PLANE('',#329250); +#329250 = AXIS2_PLACEMENT_3D('',#329251,#329252,#329253); +#329251 = CARTESIAN_POINT('',(153.85,-60.475,1.51)); +#329252 = DIRECTION('',(1.,0.,-0.)); +#329253 = DIRECTION('',(0.,-1.,0.)); +#329254 = ADVANCED_FACE('',(#329255),#329282,.T.); +#329255 = FACE_BOUND('',#329256,.T.); +#329256 = EDGE_LOOP('',(#329257,#329258,#329267,#329275)); +#329257 = ORIENTED_EDGE('',*,*,#329236,.T.); +#329258 = ORIENTED_EDGE('',*,*,#329259,.T.); +#329259 = EDGE_CURVE('',#329229,#329260,#329262,.T.); +#329260 = VERTEX_POINT('',#329261); +#329261 = CARTESIAN_POINT('',(153.625,-61.15,1.55)); +#329262 = CIRCLE('',#329263,0.225000087974); +#329263 = AXIS2_PLACEMENT_3D('',#329264,#329265,#329266); +#329264 = CARTESIAN_POINT('',(153.62499991202,-60.92499991202,1.55)); +#329265 = DIRECTION('',(0.,0.,-1.)); +#329266 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329267 = ORIENTED_EDGE('',*,*,#329268,.F.); +#329268 = EDGE_CURVE('',#329269,#329260,#329271,.T.); +#329269 = VERTEX_POINT('',#329270); +#329270 = CARTESIAN_POINT('',(153.625,-61.15,1.51)); +#329271 = LINE('',#329272,#329273); +#329272 = CARTESIAN_POINT('',(153.625,-61.15,1.51)); +#329273 = VECTOR('',#329274,1.); +#329274 = DIRECTION('',(0.,0.,1.)); +#329275 = ORIENTED_EDGE('',*,*,#329276,.F.); +#329276 = EDGE_CURVE('',#329237,#329269,#329277,.T.); +#329277 = CIRCLE('',#329278,0.225000087974); +#329278 = AXIS2_PLACEMENT_3D('',#329279,#329280,#329281); +#329279 = CARTESIAN_POINT('',(153.62499991202,-60.92499991202,1.51)); +#329280 = DIRECTION('',(0.,0.,-1.)); +#329281 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329282 = CYLINDRICAL_SURFACE('',#329283,0.225000087974); +#329283 = AXIS2_PLACEMENT_3D('',#329284,#329285,#329286); +#329284 = CARTESIAN_POINT('',(153.62499991202,-60.92499991202,1.51)); +#329285 = DIRECTION('',(0.,0.,-1.)); +#329286 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329287 = ADVANCED_FACE('',(#329288),#329313,.T.); +#329288 = FACE_BOUND('',#329289,.T.); +#329289 = EDGE_LOOP('',(#329290,#329291,#329299,#329307)); +#329290 = ORIENTED_EDGE('',*,*,#329268,.T.); +#329291 = ORIENTED_EDGE('',*,*,#329292,.T.); +#329292 = EDGE_CURVE('',#329260,#329293,#329295,.T.); +#329293 = VERTEX_POINT('',#329294); +#329294 = CARTESIAN_POINT('',(152.775,-61.15,1.55)); +#329295 = LINE('',#329296,#329297); +#329296 = CARTESIAN_POINT('',(153.625,-61.15,1.55)); +#329297 = VECTOR('',#329298,1.); +#329298 = DIRECTION('',(-1.,0.,0.)); +#329299 = ORIENTED_EDGE('',*,*,#329300,.F.); +#329300 = EDGE_CURVE('',#329301,#329293,#329303,.T.); +#329301 = VERTEX_POINT('',#329302); +#329302 = CARTESIAN_POINT('',(152.775,-61.15,1.51)); +#329303 = LINE('',#329304,#329305); +#329304 = CARTESIAN_POINT('',(152.775,-61.15,1.51)); +#329305 = VECTOR('',#329306,1.); +#329306 = DIRECTION('',(0.,0.,1.)); +#329307 = ORIENTED_EDGE('',*,*,#329308,.F.); +#329308 = EDGE_CURVE('',#329269,#329301,#329309,.T.); +#329309 = LINE('',#329310,#329311); +#329310 = CARTESIAN_POINT('',(153.625,-61.15,1.51)); +#329311 = VECTOR('',#329312,1.); +#329312 = DIRECTION('',(-1.,0.,0.)); +#329313 = PLANE('',#329314); +#329314 = AXIS2_PLACEMENT_3D('',#329315,#329316,#329317); +#329315 = CARTESIAN_POINT('',(153.625,-61.15,1.51)); +#329316 = DIRECTION('',(0.,-1.,0.)); +#329317 = DIRECTION('',(-1.,0.,0.)); +#329318 = ADVANCED_FACE('',(#329319),#329346,.T.); +#329319 = FACE_BOUND('',#329320,.T.); +#329320 = EDGE_LOOP('',(#329321,#329322,#329331,#329339)); +#329321 = ORIENTED_EDGE('',*,*,#329300,.T.); +#329322 = ORIENTED_EDGE('',*,*,#329323,.T.); +#329323 = EDGE_CURVE('',#329293,#329324,#329326,.T.); +#329324 = VERTEX_POINT('',#329325); +#329325 = CARTESIAN_POINT('',(152.55,-60.925,1.55)); +#329326 = CIRCLE('',#329327,0.225000087974); +#329327 = AXIS2_PLACEMENT_3D('',#329328,#329329,#329330); +#329328 = CARTESIAN_POINT('',(152.77500008797,-60.92499991202,1.55)); +#329329 = DIRECTION('',(0.,0.,-1.)); +#329330 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#329331 = ORIENTED_EDGE('',*,*,#329332,.F.); +#329332 = EDGE_CURVE('',#329333,#329324,#329335,.T.); +#329333 = VERTEX_POINT('',#329334); +#329334 = CARTESIAN_POINT('',(152.55,-60.925,1.51)); +#329335 = LINE('',#329336,#329337); +#329336 = CARTESIAN_POINT('',(152.55,-60.925,1.51)); +#329337 = VECTOR('',#329338,1.); +#329338 = DIRECTION('',(0.,0.,1.)); +#329339 = ORIENTED_EDGE('',*,*,#329340,.F.); +#329340 = EDGE_CURVE('',#329301,#329333,#329341,.T.); +#329341 = CIRCLE('',#329342,0.225000087974); +#329342 = AXIS2_PLACEMENT_3D('',#329343,#329344,#329345); +#329343 = CARTESIAN_POINT('',(152.77500008797,-60.92499991202,1.51)); +#329344 = DIRECTION('',(0.,0.,-1.)); +#329345 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#329346 = CYLINDRICAL_SURFACE('',#329347,0.225000087974); +#329347 = AXIS2_PLACEMENT_3D('',#329348,#329349,#329350); +#329348 = CARTESIAN_POINT('',(152.77500008797,-60.92499991202,1.51)); +#329349 = DIRECTION('',(0.,0.,-1.)); +#329350 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#329351 = ADVANCED_FACE('',(#329352),#329368,.T.); +#329352 = FACE_BOUND('',#329353,.T.); +#329353 = EDGE_LOOP('',(#329354,#329355,#329361,#329362)); +#329354 = ORIENTED_EDGE('',*,*,#329332,.T.); +#329355 = ORIENTED_EDGE('',*,*,#329356,.T.); +#329356 = EDGE_CURVE('',#329324,#329124,#329357,.T.); +#329357 = LINE('',#329358,#329359); +#329358 = CARTESIAN_POINT('',(152.55,-60.925,1.55)); +#329359 = VECTOR('',#329360,1.); +#329360 = DIRECTION('',(0.,1.,0.)); +#329361 = ORIENTED_EDGE('',*,*,#329121,.F.); +#329362 = ORIENTED_EDGE('',*,*,#329363,.F.); +#329363 = EDGE_CURVE('',#329333,#329122,#329364,.T.); +#329364 = LINE('',#329365,#329366); +#329365 = CARTESIAN_POINT('',(152.55,-60.925,1.51)); +#329366 = VECTOR('',#329367,1.); +#329367 = DIRECTION('',(0.,1.,0.)); +#329368 = PLANE('',#329369); +#329369 = AXIS2_PLACEMENT_3D('',#329370,#329371,#329372); +#329370 = CARTESIAN_POINT('',(152.55,-60.925,1.51)); +#329371 = DIRECTION('',(-1.,0.,0.)); +#329372 = DIRECTION('',(0.,1.,0.)); +#329373 = ADVANCED_FACE('',(#329374),#329384,.F.); +#329374 = FACE_BOUND('',#329375,.T.); +#329375 = EDGE_LOOP('',(#329376,#329377,#329378,#329379,#329380,#329381, + #329382,#329383)); +#329376 = ORIENTED_EDGE('',*,*,#329148,.T.); +#329377 = ORIENTED_EDGE('',*,*,#329180,.T.); +#329378 = ORIENTED_EDGE('',*,*,#329212,.T.); +#329379 = ORIENTED_EDGE('',*,*,#329244,.T.); +#329380 = ORIENTED_EDGE('',*,*,#329276,.T.); +#329381 = ORIENTED_EDGE('',*,*,#329308,.T.); +#329382 = ORIENTED_EDGE('',*,*,#329340,.T.); +#329383 = ORIENTED_EDGE('',*,*,#329363,.T.); +#329384 = PLANE('',#329385); +#329385 = AXIS2_PLACEMENT_3D('',#329386,#329387,#329388); +#329386 = CARTESIAN_POINT('',(0.,0.,1.51)); +#329387 = DIRECTION('',(0.,0.,1.)); +#329388 = DIRECTION('',(1.,0.,-0.)); +#329389 = ADVANCED_FACE('',(#329390),#329400,.T.); +#329390 = FACE_BOUND('',#329391,.F.); +#329391 = EDGE_LOOP('',(#329392,#329393,#329394,#329395,#329396,#329397, + #329398,#329399)); +#329392 = ORIENTED_EDGE('',*,*,#329131,.T.); +#329393 = ORIENTED_EDGE('',*,*,#329164,.T.); +#329394 = ORIENTED_EDGE('',*,*,#329195,.T.); +#329395 = ORIENTED_EDGE('',*,*,#329228,.T.); +#329396 = ORIENTED_EDGE('',*,*,#329259,.T.); +#329397 = ORIENTED_EDGE('',*,*,#329292,.T.); +#329398 = ORIENTED_EDGE('',*,*,#329323,.T.); +#329399 = ORIENTED_EDGE('',*,*,#329356,.T.); +#329400 = PLANE('',#329401); +#329401 = AXIS2_PLACEMENT_3D('',#329402,#329403,#329404); +#329402 = CARTESIAN_POINT('',(0.,0.,1.55)); +#329403 = DIRECTION('',(0.,0.,1.)); +#329404 = DIRECTION('',(1.,0.,-0.)); +#329405 = MANIFOLD_SOLID_BREP('',#329406); +#329406 = CLOSED_SHELL('',(#329407,#329449,#329480,#329513,#329544, + #329577,#329608,#329641,#329663,#329679)); +#329407 = ADVANCED_FACE('',(#329408),#329444,.T.); +#329408 = FACE_BOUND('',#329409,.T.); +#329409 = EDGE_LOOP('',(#329410,#329420,#329429,#329437)); +#329410 = ORIENTED_EDGE('',*,*,#329411,.T.); +#329411 = EDGE_CURVE('',#329412,#329414,#329416,.T.); +#329412 = VERTEX_POINT('',#329413); +#329413 = CARTESIAN_POINT('',(148.85,-60.475,1.51)); +#329414 = VERTEX_POINT('',#329415); +#329415 = CARTESIAN_POINT('',(148.85,-60.475,1.55)); +#329416 = LINE('',#329417,#329418); +#329417 = CARTESIAN_POINT('',(148.85,-60.475,1.51)); +#329418 = VECTOR('',#329419,1.); +#329419 = DIRECTION('',(0.,0.,1.)); +#329420 = ORIENTED_EDGE('',*,*,#329421,.T.); +#329421 = EDGE_CURVE('',#329414,#329422,#329424,.T.); +#329422 = VERTEX_POINT('',#329423); +#329423 = CARTESIAN_POINT('',(149.075,-60.25,1.55)); +#329424 = CIRCLE('',#329425,0.225000087974); +#329425 = AXIS2_PLACEMENT_3D('',#329426,#329427,#329428); +#329426 = CARTESIAN_POINT('',(149.07500008797,-60.47500008797,1.55)); +#329427 = DIRECTION('',(0.,0.,-1.)); +#329428 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#329429 = ORIENTED_EDGE('',*,*,#329430,.F.); +#329430 = EDGE_CURVE('',#329431,#329422,#329433,.T.); +#329431 = VERTEX_POINT('',#329432); +#329432 = CARTESIAN_POINT('',(149.075,-60.25,1.51)); +#329433 = LINE('',#329434,#329435); +#329434 = CARTESIAN_POINT('',(149.075,-60.25,1.51)); +#329435 = VECTOR('',#329436,1.); +#329436 = DIRECTION('',(0.,0.,1.)); +#329437 = ORIENTED_EDGE('',*,*,#329438,.F.); +#329438 = EDGE_CURVE('',#329412,#329431,#329439,.T.); +#329439 = CIRCLE('',#329440,0.225000087974); +#329440 = AXIS2_PLACEMENT_3D('',#329441,#329442,#329443); +#329441 = CARTESIAN_POINT('',(149.07500008797,-60.47500008797,1.51)); +#329442 = DIRECTION('',(0.,0.,-1.)); +#329443 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#329444 = CYLINDRICAL_SURFACE('',#329445,0.225000087974); +#329445 = AXIS2_PLACEMENT_3D('',#329446,#329447,#329448); +#329446 = CARTESIAN_POINT('',(149.07500008797,-60.47500008797,1.51)); +#329447 = DIRECTION('',(0.,0.,-1.)); +#329448 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#329449 = ADVANCED_FACE('',(#329450),#329475,.T.); +#329450 = FACE_BOUND('',#329451,.T.); +#329451 = EDGE_LOOP('',(#329452,#329453,#329461,#329469)); +#329452 = ORIENTED_EDGE('',*,*,#329430,.T.); +#329453 = ORIENTED_EDGE('',*,*,#329454,.T.); +#329454 = EDGE_CURVE('',#329422,#329455,#329457,.T.); +#329455 = VERTEX_POINT('',#329456); +#329456 = CARTESIAN_POINT('',(149.925,-60.25,1.55)); +#329457 = LINE('',#329458,#329459); +#329458 = CARTESIAN_POINT('',(149.075,-60.25,1.55)); +#329459 = VECTOR('',#329460,1.); +#329460 = DIRECTION('',(1.,0.,0.)); +#329461 = ORIENTED_EDGE('',*,*,#329462,.F.); +#329462 = EDGE_CURVE('',#329463,#329455,#329465,.T.); +#329463 = VERTEX_POINT('',#329464); +#329464 = CARTESIAN_POINT('',(149.925,-60.25,1.51)); +#329465 = LINE('',#329466,#329467); +#329466 = CARTESIAN_POINT('',(149.925,-60.25,1.51)); +#329467 = VECTOR('',#329468,1.); +#329468 = DIRECTION('',(0.,0.,1.)); +#329469 = ORIENTED_EDGE('',*,*,#329470,.F.); +#329470 = EDGE_CURVE('',#329431,#329463,#329471,.T.); +#329471 = LINE('',#329472,#329473); +#329472 = CARTESIAN_POINT('',(149.075,-60.25,1.51)); +#329473 = VECTOR('',#329474,1.); +#329474 = DIRECTION('',(1.,0.,0.)); +#329475 = PLANE('',#329476); +#329476 = AXIS2_PLACEMENT_3D('',#329477,#329478,#329479); +#329477 = CARTESIAN_POINT('',(149.075,-60.25,1.51)); +#329478 = DIRECTION('',(0.,1.,0.)); +#329479 = DIRECTION('',(1.,0.,0.)); +#329480 = ADVANCED_FACE('',(#329481),#329508,.T.); +#329481 = FACE_BOUND('',#329482,.T.); +#329482 = EDGE_LOOP('',(#329483,#329484,#329493,#329501)); +#329483 = ORIENTED_EDGE('',*,*,#329462,.T.); +#329484 = ORIENTED_EDGE('',*,*,#329485,.T.); +#329485 = EDGE_CURVE('',#329455,#329486,#329488,.T.); +#329486 = VERTEX_POINT('',#329487); +#329487 = CARTESIAN_POINT('',(150.15,-60.475,1.55)); +#329488 = CIRCLE('',#329489,0.225000087974); +#329489 = AXIS2_PLACEMENT_3D('',#329490,#329491,#329492); +#329490 = CARTESIAN_POINT('',(149.92499991202,-60.47500008797,1.55)); +#329491 = DIRECTION('',(0.,0.,-1.)); +#329492 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329493 = ORIENTED_EDGE('',*,*,#329494,.F.); +#329494 = EDGE_CURVE('',#329495,#329486,#329497,.T.); +#329495 = VERTEX_POINT('',#329496); +#329496 = CARTESIAN_POINT('',(150.15,-60.475,1.51)); +#329497 = LINE('',#329498,#329499); +#329498 = CARTESIAN_POINT('',(150.15,-60.475,1.51)); +#329499 = VECTOR('',#329500,1.); +#329500 = DIRECTION('',(0.,0.,1.)); +#329501 = ORIENTED_EDGE('',*,*,#329502,.F.); +#329502 = EDGE_CURVE('',#329463,#329495,#329503,.T.); +#329503 = CIRCLE('',#329504,0.225000087974); +#329504 = AXIS2_PLACEMENT_3D('',#329505,#329506,#329507); +#329505 = CARTESIAN_POINT('',(149.92499991202,-60.47500008797,1.51)); +#329506 = DIRECTION('',(0.,0.,-1.)); +#329507 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329508 = CYLINDRICAL_SURFACE('',#329509,0.225000087974); +#329509 = AXIS2_PLACEMENT_3D('',#329510,#329511,#329512); +#329510 = CARTESIAN_POINT('',(149.92499991202,-60.47500008797,1.51)); +#329511 = DIRECTION('',(0.,0.,-1.)); +#329512 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#329513 = ADVANCED_FACE('',(#329514),#329539,.T.); +#329514 = FACE_BOUND('',#329515,.T.); +#329515 = EDGE_LOOP('',(#329516,#329517,#329525,#329533)); +#329516 = ORIENTED_EDGE('',*,*,#329494,.T.); +#329517 = ORIENTED_EDGE('',*,*,#329518,.T.); +#329518 = EDGE_CURVE('',#329486,#329519,#329521,.T.); +#329519 = VERTEX_POINT('',#329520); +#329520 = CARTESIAN_POINT('',(150.15,-60.925,1.55)); +#329521 = LINE('',#329522,#329523); +#329522 = CARTESIAN_POINT('',(150.15,-60.475,1.55)); +#329523 = VECTOR('',#329524,1.); +#329524 = DIRECTION('',(0.,-1.,0.)); +#329525 = ORIENTED_EDGE('',*,*,#329526,.F.); +#329526 = EDGE_CURVE('',#329527,#329519,#329529,.T.); +#329527 = VERTEX_POINT('',#329528); +#329528 = CARTESIAN_POINT('',(150.15,-60.925,1.51)); +#329529 = LINE('',#329530,#329531); +#329530 = CARTESIAN_POINT('',(150.15,-60.925,1.51)); +#329531 = VECTOR('',#329532,1.); +#329532 = DIRECTION('',(0.,0.,1.)); +#329533 = ORIENTED_EDGE('',*,*,#329534,.F.); +#329534 = EDGE_CURVE('',#329495,#329527,#329535,.T.); +#329535 = LINE('',#329536,#329537); +#329536 = CARTESIAN_POINT('',(150.15,-60.475,1.51)); +#329537 = VECTOR('',#329538,1.); +#329538 = DIRECTION('',(0.,-1.,0.)); +#329539 = PLANE('',#329540); +#329540 = AXIS2_PLACEMENT_3D('',#329541,#329542,#329543); +#329541 = CARTESIAN_POINT('',(150.15,-60.475,1.51)); +#329542 = DIRECTION('',(1.,0.,-0.)); +#329543 = DIRECTION('',(0.,-1.,0.)); +#329544 = ADVANCED_FACE('',(#329545),#329572,.T.); +#329545 = FACE_BOUND('',#329546,.T.); +#329546 = EDGE_LOOP('',(#329547,#329548,#329557,#329565)); +#329547 = ORIENTED_EDGE('',*,*,#329526,.T.); +#329548 = ORIENTED_EDGE('',*,*,#329549,.T.); +#329549 = EDGE_CURVE('',#329519,#329550,#329552,.T.); +#329550 = VERTEX_POINT('',#329551); +#329551 = CARTESIAN_POINT('',(149.925,-61.15,1.55)); +#329552 = CIRCLE('',#329553,0.225000087974); +#329553 = AXIS2_PLACEMENT_3D('',#329554,#329555,#329556); +#329554 = CARTESIAN_POINT('',(149.92499991202,-60.92499991202,1.55)); +#329555 = DIRECTION('',(0.,0.,-1.)); +#329556 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329557 = ORIENTED_EDGE('',*,*,#329558,.F.); +#329558 = EDGE_CURVE('',#329559,#329550,#329561,.T.); +#329559 = VERTEX_POINT('',#329560); +#329560 = CARTESIAN_POINT('',(149.925,-61.15,1.51)); +#329561 = LINE('',#329562,#329563); +#329562 = CARTESIAN_POINT('',(149.925,-61.15,1.51)); +#329563 = VECTOR('',#329564,1.); +#329564 = DIRECTION('',(0.,0.,1.)); +#329565 = ORIENTED_EDGE('',*,*,#329566,.F.); +#329566 = EDGE_CURVE('',#329527,#329559,#329567,.T.); +#329567 = CIRCLE('',#329568,0.225000087974); +#329568 = AXIS2_PLACEMENT_3D('',#329569,#329570,#329571); +#329569 = CARTESIAN_POINT('',(149.92499991202,-60.92499991202,1.51)); +#329570 = DIRECTION('',(0.,0.,-1.)); +#329571 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329572 = CYLINDRICAL_SURFACE('',#329573,0.225000087974); +#329573 = AXIS2_PLACEMENT_3D('',#329574,#329575,#329576); +#329574 = CARTESIAN_POINT('',(149.92499991202,-60.92499991202,1.51)); +#329575 = DIRECTION('',(0.,0.,-1.)); +#329576 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#329577 = ADVANCED_FACE('',(#329578),#329603,.T.); +#329578 = FACE_BOUND('',#329579,.T.); +#329579 = EDGE_LOOP('',(#329580,#329581,#329589,#329597)); +#329580 = ORIENTED_EDGE('',*,*,#329558,.T.); +#329581 = ORIENTED_EDGE('',*,*,#329582,.T.); +#329582 = EDGE_CURVE('',#329550,#329583,#329585,.T.); +#329583 = VERTEX_POINT('',#329584); +#329584 = CARTESIAN_POINT('',(149.075,-61.15,1.55)); +#329585 = LINE('',#329586,#329587); +#329586 = CARTESIAN_POINT('',(149.925,-61.15,1.55)); +#329587 = VECTOR('',#329588,1.); +#329588 = DIRECTION('',(-1.,0.,0.)); +#329589 = ORIENTED_EDGE('',*,*,#329590,.F.); +#329590 = EDGE_CURVE('',#329591,#329583,#329593,.T.); +#329591 = VERTEX_POINT('',#329592); +#329592 = CARTESIAN_POINT('',(149.075,-61.15,1.51)); +#329593 = LINE('',#329594,#329595); +#329594 = CARTESIAN_POINT('',(149.075,-61.15,1.51)); +#329595 = VECTOR('',#329596,1.); +#329596 = DIRECTION('',(0.,0.,1.)); +#329597 = ORIENTED_EDGE('',*,*,#329598,.F.); +#329598 = EDGE_CURVE('',#329559,#329591,#329599,.T.); +#329599 = LINE('',#329600,#329601); +#329600 = CARTESIAN_POINT('',(149.925,-61.15,1.51)); +#329601 = VECTOR('',#329602,1.); +#329602 = DIRECTION('',(-1.,0.,0.)); +#329603 = PLANE('',#329604); +#329604 = AXIS2_PLACEMENT_3D('',#329605,#329606,#329607); +#329605 = CARTESIAN_POINT('',(149.925,-61.15,1.51)); +#329606 = DIRECTION('',(0.,-1.,0.)); +#329607 = DIRECTION('',(-1.,0.,0.)); +#329608 = ADVANCED_FACE('',(#329609),#329636,.T.); +#329609 = FACE_BOUND('',#329610,.T.); +#329610 = EDGE_LOOP('',(#329611,#329612,#329621,#329629)); +#329611 = ORIENTED_EDGE('',*,*,#329590,.T.); +#329612 = ORIENTED_EDGE('',*,*,#329613,.T.); +#329613 = EDGE_CURVE('',#329583,#329614,#329616,.T.); +#329614 = VERTEX_POINT('',#329615); +#329615 = CARTESIAN_POINT('',(148.85,-60.925,1.55)); +#329616 = CIRCLE('',#329617,0.225000087974); +#329617 = AXIS2_PLACEMENT_3D('',#329618,#329619,#329620); +#329618 = CARTESIAN_POINT('',(149.07500008797,-60.92499991202,1.55)); +#329619 = DIRECTION('',(0.,0.,-1.)); +#329620 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#329621 = ORIENTED_EDGE('',*,*,#329622,.F.); +#329622 = EDGE_CURVE('',#329623,#329614,#329625,.T.); +#329623 = VERTEX_POINT('',#329624); +#329624 = CARTESIAN_POINT('',(148.85,-60.925,1.51)); +#329625 = LINE('',#329626,#329627); +#329626 = CARTESIAN_POINT('',(148.85,-60.925,1.51)); +#329627 = VECTOR('',#329628,1.); +#329628 = DIRECTION('',(0.,0.,1.)); +#329629 = ORIENTED_EDGE('',*,*,#329630,.F.); +#329630 = EDGE_CURVE('',#329591,#329623,#329631,.T.); +#329631 = CIRCLE('',#329632,0.225000087974); +#329632 = AXIS2_PLACEMENT_3D('',#329633,#329634,#329635); +#329633 = CARTESIAN_POINT('',(149.07500008797,-60.92499991202,1.51)); +#329634 = DIRECTION('',(0.,0.,-1.)); +#329635 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#329636 = CYLINDRICAL_SURFACE('',#329637,0.225000087974); +#329637 = AXIS2_PLACEMENT_3D('',#329638,#329639,#329640); +#329638 = CARTESIAN_POINT('',(149.07500008797,-60.92499991202,1.51)); +#329639 = DIRECTION('',(0.,0.,-1.)); +#329640 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#329641 = ADVANCED_FACE('',(#329642),#329658,.T.); +#329642 = FACE_BOUND('',#329643,.T.); +#329643 = EDGE_LOOP('',(#329644,#329645,#329651,#329652)); +#329644 = ORIENTED_EDGE('',*,*,#329622,.T.); +#329645 = ORIENTED_EDGE('',*,*,#329646,.T.); +#329646 = EDGE_CURVE('',#329614,#329414,#329647,.T.); +#329647 = LINE('',#329648,#329649); +#329648 = CARTESIAN_POINT('',(148.85,-60.925,1.55)); +#329649 = VECTOR('',#329650,1.); +#329650 = DIRECTION('',(0.,1.,0.)); +#329651 = ORIENTED_EDGE('',*,*,#329411,.F.); +#329652 = ORIENTED_EDGE('',*,*,#329653,.F.); +#329653 = EDGE_CURVE('',#329623,#329412,#329654,.T.); +#329654 = LINE('',#329655,#329656); +#329655 = CARTESIAN_POINT('',(148.85,-60.925,1.51)); +#329656 = VECTOR('',#329657,1.); +#329657 = DIRECTION('',(0.,1.,0.)); +#329658 = PLANE('',#329659); +#329659 = AXIS2_PLACEMENT_3D('',#329660,#329661,#329662); +#329660 = CARTESIAN_POINT('',(148.85,-60.925,1.51)); +#329661 = DIRECTION('',(-1.,0.,0.)); +#329662 = DIRECTION('',(0.,1.,0.)); +#329663 = ADVANCED_FACE('',(#329664),#329674,.F.); +#329664 = FACE_BOUND('',#329665,.T.); +#329665 = EDGE_LOOP('',(#329666,#329667,#329668,#329669,#329670,#329671, + #329672,#329673)); +#329666 = ORIENTED_EDGE('',*,*,#329438,.T.); +#329667 = ORIENTED_EDGE('',*,*,#329470,.T.); +#329668 = ORIENTED_EDGE('',*,*,#329502,.T.); +#329669 = ORIENTED_EDGE('',*,*,#329534,.T.); +#329670 = ORIENTED_EDGE('',*,*,#329566,.T.); +#329671 = ORIENTED_EDGE('',*,*,#329598,.T.); +#329672 = ORIENTED_EDGE('',*,*,#329630,.T.); +#329673 = ORIENTED_EDGE('',*,*,#329653,.T.); +#329674 = PLANE('',#329675); +#329675 = AXIS2_PLACEMENT_3D('',#329676,#329677,#329678); +#329676 = CARTESIAN_POINT('',(0.,0.,1.51)); +#329677 = DIRECTION('',(0.,0.,1.)); +#329678 = DIRECTION('',(1.,0.,-0.)); +#329679 = ADVANCED_FACE('',(#329680),#329690,.T.); +#329680 = FACE_BOUND('',#329681,.F.); +#329681 = EDGE_LOOP('',(#329682,#329683,#329684,#329685,#329686,#329687, + #329688,#329689)); +#329682 = ORIENTED_EDGE('',*,*,#329421,.T.); +#329683 = ORIENTED_EDGE('',*,*,#329454,.T.); +#329684 = ORIENTED_EDGE('',*,*,#329485,.T.); +#329685 = ORIENTED_EDGE('',*,*,#329518,.T.); +#329686 = ORIENTED_EDGE('',*,*,#329549,.T.); +#329687 = ORIENTED_EDGE('',*,*,#329582,.T.); +#329688 = ORIENTED_EDGE('',*,*,#329613,.T.); +#329689 = ORIENTED_EDGE('',*,*,#329646,.T.); +#329690 = PLANE('',#329691); +#329691 = AXIS2_PLACEMENT_3D('',#329692,#329693,#329694); +#329692 = CARTESIAN_POINT('',(0.,0.,1.55)); +#329693 = DIRECTION('',(0.,0.,1.)); +#329694 = DIRECTION('',(1.,0.,-0.)); +#329695 = MANIFOLD_SOLID_BREP('',#329696); +#329696 = CLOSED_SHELL('',(#329697,#329730,#329739)); +#329697 = ADVANCED_FACE('',(#329698),#329725,.T.); +#329698 = FACE_BOUND('',#329699,.F.); +#329699 = EDGE_LOOP('',(#329700,#329710,#329717,#329718)); +#329700 = ORIENTED_EDGE('',*,*,#329701,.T.); +#329701 = EDGE_CURVE('',#329702,#329704,#329706,.T.); +#329702 = VERTEX_POINT('',#329703); +#329703 = CARTESIAN_POINT('',(123.5,-95.,1.51)); +#329704 = VERTEX_POINT('',#329705); +#329705 = CARTESIAN_POINT('',(123.5,-95.,1.55)); +#329706 = LINE('',#329707,#329708); +#329707 = CARTESIAN_POINT('',(123.5,-95.,1.51)); +#329708 = VECTOR('',#329709,1.); +#329709 = DIRECTION('',(0.,0.,1.)); +#329710 = ORIENTED_EDGE('',*,*,#329711,.T.); +#329711 = EDGE_CURVE('',#329704,#329704,#329712,.T.); +#329712 = CIRCLE('',#329713,0.5); +#329713 = AXIS2_PLACEMENT_3D('',#329714,#329715,#329716); +#329714 = CARTESIAN_POINT('',(123.,-95.,1.55)); +#329715 = DIRECTION('',(0.,0.,1.)); +#329716 = DIRECTION('',(1.,0.,-0.)); +#329717 = ORIENTED_EDGE('',*,*,#329701,.F.); +#329718 = ORIENTED_EDGE('',*,*,#329719,.F.); +#329719 = EDGE_CURVE('',#329702,#329702,#329720,.T.); +#329720 = CIRCLE('',#329721,0.5); +#329721 = AXIS2_PLACEMENT_3D('',#329722,#329723,#329724); +#329722 = CARTESIAN_POINT('',(123.,-95.,1.51)); +#329723 = DIRECTION('',(0.,0.,1.)); +#329724 = DIRECTION('',(1.,0.,-0.)); +#329725 = CYLINDRICAL_SURFACE('',#329726,0.5); +#329726 = AXIS2_PLACEMENT_3D('',#329727,#329728,#329729); +#329727 = CARTESIAN_POINT('',(123.,-95.,1.51)); +#329728 = DIRECTION('',(-0.,-0.,-1.)); +#329729 = DIRECTION('',(1.,0.,-0.)); +#329730 = ADVANCED_FACE('',(#329731),#329734,.F.); +#329731 = FACE_BOUND('',#329732,.F.); +#329732 = EDGE_LOOP('',(#329733)); +#329733 = ORIENTED_EDGE('',*,*,#329719,.T.); +#329734 = PLANE('',#329735); +#329735 = AXIS2_PLACEMENT_3D('',#329736,#329737,#329738); +#329736 = CARTESIAN_POINT('',(0.,0.,1.51)); +#329737 = DIRECTION('',(0.,0.,1.)); +#329738 = DIRECTION('',(1.,0.,-0.)); +#329739 = ADVANCED_FACE('',(#329740),#329743,.T.); +#329740 = FACE_BOUND('',#329741,.T.); +#329741 = EDGE_LOOP('',(#329742)); +#329742 = ORIENTED_EDGE('',*,*,#329711,.T.); +#329743 = PLANE('',#329744); +#329744 = AXIS2_PLACEMENT_3D('',#329745,#329746,#329747); +#329745 = CARTESIAN_POINT('',(0.,0.,1.55)); +#329746 = DIRECTION('',(0.,0.,1.)); +#329747 = DIRECTION('',(1.,0.,-0.)); +#329748 = MANIFOLD_SOLID_BREP('',#329749); +#329749 = CLOSED_SHELL('',(#329750,#329792,#329823,#329856,#329887, + #329920,#329951,#329984,#330006,#330022)); +#329750 = ADVANCED_FACE('',(#329751),#329787,.T.); +#329751 = FACE_BOUND('',#329752,.T.); +#329752 = EDGE_LOOP('',(#329753,#329763,#329772,#329780)); +#329753 = ORIENTED_EDGE('',*,*,#329754,.T.); +#329754 = EDGE_CURVE('',#329755,#329757,#329759,.T.); +#329755 = VERTEX_POINT('',#329756); +#329756 = CARTESIAN_POINT('',(124.85,-60.475,1.51)); +#329757 = VERTEX_POINT('',#329758); +#329758 = CARTESIAN_POINT('',(124.85,-60.475,1.55)); +#329759 = LINE('',#329760,#329761); +#329760 = CARTESIAN_POINT('',(124.85,-60.475,1.51)); +#329761 = VECTOR('',#329762,1.); +#329762 = DIRECTION('',(0.,0.,1.)); +#329763 = ORIENTED_EDGE('',*,*,#329764,.T.); +#329764 = EDGE_CURVE('',#329757,#329765,#329767,.T.); +#329765 = VERTEX_POINT('',#329766); +#329766 = CARTESIAN_POINT('',(125.075,-60.25,1.55)); +#329767 = CIRCLE('',#329768,0.225000087974); +#329768 = AXIS2_PLACEMENT_3D('',#329769,#329770,#329771); +#329769 = CARTESIAN_POINT('',(125.07500008797,-60.47500008797,1.55)); +#329770 = DIRECTION('',(0.,0.,-1.)); +#329771 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#329772 = ORIENTED_EDGE('',*,*,#329773,.F.); +#329773 = EDGE_CURVE('',#329774,#329765,#329776,.T.); +#329774 = VERTEX_POINT('',#329775); +#329775 = CARTESIAN_POINT('',(125.075,-60.25,1.51)); +#329776 = LINE('',#329777,#329778); +#329777 = CARTESIAN_POINT('',(125.075,-60.25,1.51)); +#329778 = VECTOR('',#329779,1.); +#329779 = DIRECTION('',(0.,0.,1.)); +#329780 = ORIENTED_EDGE('',*,*,#329781,.F.); +#329781 = EDGE_CURVE('',#329755,#329774,#329782,.T.); +#329782 = CIRCLE('',#329783,0.225000087974); +#329783 = AXIS2_PLACEMENT_3D('',#329784,#329785,#329786); +#329784 = CARTESIAN_POINT('',(125.07500008797,-60.47500008797,1.51)); +#329785 = DIRECTION('',(0.,0.,-1.)); +#329786 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#329787 = CYLINDRICAL_SURFACE('',#329788,0.225000087974); +#329788 = AXIS2_PLACEMENT_3D('',#329789,#329790,#329791); +#329789 = CARTESIAN_POINT('',(125.07500008797,-60.47500008797,1.51)); +#329790 = DIRECTION('',(0.,0.,-1.)); +#329791 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#329792 = ADVANCED_FACE('',(#329793),#329818,.T.); +#329793 = FACE_BOUND('',#329794,.T.); +#329794 = EDGE_LOOP('',(#329795,#329796,#329804,#329812)); +#329795 = ORIENTED_EDGE('',*,*,#329773,.T.); +#329796 = ORIENTED_EDGE('',*,*,#329797,.T.); +#329797 = EDGE_CURVE('',#329765,#329798,#329800,.T.); +#329798 = VERTEX_POINT('',#329799); +#329799 = CARTESIAN_POINT('',(125.925,-60.25,1.55)); +#329800 = LINE('',#329801,#329802); +#329801 = CARTESIAN_POINT('',(125.075,-60.25,1.55)); +#329802 = VECTOR('',#329803,1.); +#329803 = DIRECTION('',(1.,0.,0.)); +#329804 = ORIENTED_EDGE('',*,*,#329805,.F.); +#329805 = EDGE_CURVE('',#329806,#329798,#329808,.T.); +#329806 = VERTEX_POINT('',#329807); +#329807 = CARTESIAN_POINT('',(125.925,-60.25,1.51)); +#329808 = LINE('',#329809,#329810); +#329809 = CARTESIAN_POINT('',(125.925,-60.25,1.51)); +#329810 = VECTOR('',#329811,1.); +#329811 = DIRECTION('',(0.,0.,1.)); +#329812 = ORIENTED_EDGE('',*,*,#329813,.F.); +#329813 = EDGE_CURVE('',#329774,#329806,#329814,.T.); +#329814 = LINE('',#329815,#329816); +#329815 = CARTESIAN_POINT('',(125.075,-60.25,1.51)); +#329816 = VECTOR('',#329817,1.); +#329817 = DIRECTION('',(1.,0.,0.)); +#329818 = PLANE('',#329819); +#329819 = AXIS2_PLACEMENT_3D('',#329820,#329821,#329822); +#329820 = CARTESIAN_POINT('',(125.075,-60.25,1.51)); +#329821 = DIRECTION('',(0.,1.,0.)); +#329822 = DIRECTION('',(1.,0.,0.)); +#329823 = ADVANCED_FACE('',(#329824),#329851,.T.); +#329824 = FACE_BOUND('',#329825,.T.); +#329825 = EDGE_LOOP('',(#329826,#329827,#329836,#329844)); +#329826 = ORIENTED_EDGE('',*,*,#329805,.T.); +#329827 = ORIENTED_EDGE('',*,*,#329828,.T.); +#329828 = EDGE_CURVE('',#329798,#329829,#329831,.T.); +#329829 = VERTEX_POINT('',#329830); +#329830 = CARTESIAN_POINT('',(126.15,-60.475,1.55)); +#329831 = CIRCLE('',#329832,0.225000087974); +#329832 = AXIS2_PLACEMENT_3D('',#329833,#329834,#329835); +#329833 = CARTESIAN_POINT('',(125.92499991202,-60.47500008797,1.55)); +#329834 = DIRECTION('',(0.,0.,-1.)); +#329835 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#329836 = ORIENTED_EDGE('',*,*,#329837,.F.); +#329837 = EDGE_CURVE('',#329838,#329829,#329840,.T.); +#329838 = VERTEX_POINT('',#329839); +#329839 = CARTESIAN_POINT('',(126.15,-60.475,1.51)); +#329840 = LINE('',#329841,#329842); +#329841 = CARTESIAN_POINT('',(126.15,-60.475,1.51)); +#329842 = VECTOR('',#329843,1.); +#329843 = DIRECTION('',(0.,0.,1.)); +#329844 = ORIENTED_EDGE('',*,*,#329845,.F.); +#329845 = EDGE_CURVE('',#329806,#329838,#329846,.T.); +#329846 = CIRCLE('',#329847,0.225000087974); +#329847 = AXIS2_PLACEMENT_3D('',#329848,#329849,#329850); +#329848 = CARTESIAN_POINT('',(125.92499991202,-60.47500008797,1.51)); +#329849 = DIRECTION('',(0.,0.,-1.)); +#329850 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#329851 = CYLINDRICAL_SURFACE('',#329852,0.225000087974); +#329852 = AXIS2_PLACEMENT_3D('',#329853,#329854,#329855); +#329853 = CARTESIAN_POINT('',(125.92499991202,-60.47500008797,1.51)); +#329854 = DIRECTION('',(0.,0.,-1.)); +#329855 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#329856 = ADVANCED_FACE('',(#329857),#329882,.T.); +#329857 = FACE_BOUND('',#329858,.T.); +#329858 = EDGE_LOOP('',(#329859,#329860,#329868,#329876)); +#329859 = ORIENTED_EDGE('',*,*,#329837,.T.); +#329860 = ORIENTED_EDGE('',*,*,#329861,.T.); +#329861 = EDGE_CURVE('',#329829,#329862,#329864,.T.); +#329862 = VERTEX_POINT('',#329863); +#329863 = CARTESIAN_POINT('',(126.15,-60.925,1.55)); +#329864 = LINE('',#329865,#329866); +#329865 = CARTESIAN_POINT('',(126.15,-60.475,1.55)); +#329866 = VECTOR('',#329867,1.); +#329867 = DIRECTION('',(0.,-1.,0.)); +#329868 = ORIENTED_EDGE('',*,*,#329869,.F.); +#329869 = EDGE_CURVE('',#329870,#329862,#329872,.T.); +#329870 = VERTEX_POINT('',#329871); +#329871 = CARTESIAN_POINT('',(126.15,-60.925,1.51)); +#329872 = LINE('',#329873,#329874); +#329873 = CARTESIAN_POINT('',(126.15,-60.925,1.51)); +#329874 = VECTOR('',#329875,1.); +#329875 = DIRECTION('',(0.,0.,1.)); +#329876 = ORIENTED_EDGE('',*,*,#329877,.F.); +#329877 = EDGE_CURVE('',#329838,#329870,#329878,.T.); +#329878 = LINE('',#329879,#329880); +#329879 = CARTESIAN_POINT('',(126.15,-60.475,1.51)); +#329880 = VECTOR('',#329881,1.); +#329881 = DIRECTION('',(0.,-1.,0.)); +#329882 = PLANE('',#329883); +#329883 = AXIS2_PLACEMENT_3D('',#329884,#329885,#329886); +#329884 = CARTESIAN_POINT('',(126.15,-60.475,1.51)); +#329885 = DIRECTION('',(1.,0.,-0.)); +#329886 = DIRECTION('',(0.,-1.,0.)); +#329887 = ADVANCED_FACE('',(#329888),#329915,.T.); +#329888 = FACE_BOUND('',#329889,.T.); +#329889 = EDGE_LOOP('',(#329890,#329891,#329900,#329908)); +#329890 = ORIENTED_EDGE('',*,*,#329869,.T.); +#329891 = ORIENTED_EDGE('',*,*,#329892,.T.); +#329892 = EDGE_CURVE('',#329862,#329893,#329895,.T.); +#329893 = VERTEX_POINT('',#329894); +#329894 = CARTESIAN_POINT('',(125.925,-61.15,1.55)); +#329895 = CIRCLE('',#329896,0.225000087974); +#329896 = AXIS2_PLACEMENT_3D('',#329897,#329898,#329899); +#329897 = CARTESIAN_POINT('',(125.92499991202,-60.92499991202,1.55)); +#329898 = DIRECTION('',(0.,0.,-1.)); +#329899 = DIRECTION('',(1.,-3.909954405556E-07,0.)); +#329900 = ORIENTED_EDGE('',*,*,#329901,.F.); +#329901 = EDGE_CURVE('',#329902,#329893,#329904,.T.); +#329902 = VERTEX_POINT('',#329903); +#329903 = CARTESIAN_POINT('',(125.925,-61.15,1.51)); +#329904 = LINE('',#329905,#329906); +#329905 = CARTESIAN_POINT('',(125.925,-61.15,1.51)); +#329906 = VECTOR('',#329907,1.); +#329907 = DIRECTION('',(0.,0.,1.)); +#329908 = ORIENTED_EDGE('',*,*,#329909,.F.); +#329909 = EDGE_CURVE('',#329870,#329902,#329910,.T.); +#329910 = CIRCLE('',#329911,0.225000087974); +#329911 = AXIS2_PLACEMENT_3D('',#329912,#329913,#329914); +#329912 = CARTESIAN_POINT('',(125.92499991202,-60.92499991202,1.51)); +#329913 = DIRECTION('',(0.,0.,-1.)); +#329914 = DIRECTION('',(1.,-3.909954405556E-07,0.)); +#329915 = CYLINDRICAL_SURFACE('',#329916,0.225000087974); +#329916 = AXIS2_PLACEMENT_3D('',#329917,#329918,#329919); +#329917 = CARTESIAN_POINT('',(125.92499991202,-60.92499991202,1.51)); +#329918 = DIRECTION('',(0.,0.,-1.)); +#329919 = DIRECTION('',(1.,-3.909954405556E-07,0.)); +#329920 = ADVANCED_FACE('',(#329921),#329946,.T.); +#329921 = FACE_BOUND('',#329922,.T.); +#329922 = EDGE_LOOP('',(#329923,#329924,#329932,#329940)); +#329923 = ORIENTED_EDGE('',*,*,#329901,.T.); +#329924 = ORIENTED_EDGE('',*,*,#329925,.T.); +#329925 = EDGE_CURVE('',#329893,#329926,#329928,.T.); +#329926 = VERTEX_POINT('',#329927); +#329927 = CARTESIAN_POINT('',(125.075,-61.15,1.55)); +#329928 = LINE('',#329929,#329930); +#329929 = CARTESIAN_POINT('',(125.925,-61.15,1.55)); +#329930 = VECTOR('',#329931,1.); +#329931 = DIRECTION('',(-1.,0.,0.)); +#329932 = ORIENTED_EDGE('',*,*,#329933,.F.); +#329933 = EDGE_CURVE('',#329934,#329926,#329936,.T.); +#329934 = VERTEX_POINT('',#329935); +#329935 = CARTESIAN_POINT('',(125.075,-61.15,1.51)); +#329936 = LINE('',#329937,#329938); +#329937 = CARTESIAN_POINT('',(125.075,-61.15,1.51)); +#329938 = VECTOR('',#329939,1.); +#329939 = DIRECTION('',(0.,0.,1.)); +#329940 = ORIENTED_EDGE('',*,*,#329941,.F.); +#329941 = EDGE_CURVE('',#329902,#329934,#329942,.T.); +#329942 = LINE('',#329943,#329944); +#329943 = CARTESIAN_POINT('',(125.925,-61.15,1.51)); +#329944 = VECTOR('',#329945,1.); +#329945 = DIRECTION('',(-1.,0.,0.)); +#329946 = PLANE('',#329947); +#329947 = AXIS2_PLACEMENT_3D('',#329948,#329949,#329950); +#329948 = CARTESIAN_POINT('',(125.925,-61.15,1.51)); +#329949 = DIRECTION('',(0.,-1.,0.)); +#329950 = DIRECTION('',(-1.,0.,0.)); +#329951 = ADVANCED_FACE('',(#329952),#329979,.T.); +#329952 = FACE_BOUND('',#329953,.T.); +#329953 = EDGE_LOOP('',(#329954,#329955,#329964,#329972)); +#329954 = ORIENTED_EDGE('',*,*,#329933,.T.); +#329955 = ORIENTED_EDGE('',*,*,#329956,.T.); +#329956 = EDGE_CURVE('',#329926,#329957,#329959,.T.); +#329957 = VERTEX_POINT('',#329958); +#329958 = CARTESIAN_POINT('',(124.85,-60.925,1.55)); +#329959 = CIRCLE('',#329960,0.225000087974); +#329960 = AXIS2_PLACEMENT_3D('',#329961,#329962,#329963); +#329961 = CARTESIAN_POINT('',(125.07500008797,-60.92499991202,1.55)); +#329962 = DIRECTION('',(0.,0.,-1.)); +#329963 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#329964 = ORIENTED_EDGE('',*,*,#329965,.F.); +#329965 = EDGE_CURVE('',#329966,#329957,#329968,.T.); +#329966 = VERTEX_POINT('',#329967); +#329967 = CARTESIAN_POINT('',(124.85,-60.925,1.51)); +#329968 = LINE('',#329969,#329970); +#329969 = CARTESIAN_POINT('',(124.85,-60.925,1.51)); +#329970 = VECTOR('',#329971,1.); +#329971 = DIRECTION('',(0.,0.,1.)); +#329972 = ORIENTED_EDGE('',*,*,#329973,.F.); +#329973 = EDGE_CURVE('',#329934,#329966,#329974,.T.); +#329974 = CIRCLE('',#329975,0.225000087974); +#329975 = AXIS2_PLACEMENT_3D('',#329976,#329977,#329978); +#329976 = CARTESIAN_POINT('',(125.07500008797,-60.92499991202,1.51)); +#329977 = DIRECTION('',(0.,0.,-1.)); +#329978 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#329979 = CYLINDRICAL_SURFACE('',#329980,0.225000087974); +#329980 = AXIS2_PLACEMENT_3D('',#329981,#329982,#329983); +#329981 = CARTESIAN_POINT('',(125.07500008797,-60.92499991202,1.51)); +#329982 = DIRECTION('',(0.,0.,-1.)); +#329983 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#329984 = ADVANCED_FACE('',(#329985),#330001,.T.); +#329985 = FACE_BOUND('',#329986,.T.); +#329986 = EDGE_LOOP('',(#329987,#329988,#329994,#329995)); +#329987 = ORIENTED_EDGE('',*,*,#329965,.T.); +#329988 = ORIENTED_EDGE('',*,*,#329989,.T.); +#329989 = EDGE_CURVE('',#329957,#329757,#329990,.T.); +#329990 = LINE('',#329991,#329992); +#329991 = CARTESIAN_POINT('',(124.85,-60.925,1.55)); +#329992 = VECTOR('',#329993,1.); +#329993 = DIRECTION('',(0.,1.,0.)); +#329994 = ORIENTED_EDGE('',*,*,#329754,.F.); +#329995 = ORIENTED_EDGE('',*,*,#329996,.F.); +#329996 = EDGE_CURVE('',#329966,#329755,#329997,.T.); +#329997 = LINE('',#329998,#329999); +#329998 = CARTESIAN_POINT('',(124.85,-60.925,1.51)); +#329999 = VECTOR('',#330000,1.); +#330000 = DIRECTION('',(0.,1.,0.)); +#330001 = PLANE('',#330002); +#330002 = AXIS2_PLACEMENT_3D('',#330003,#330004,#330005); +#330003 = CARTESIAN_POINT('',(124.85,-60.925,1.51)); +#330004 = DIRECTION('',(-1.,0.,0.)); +#330005 = DIRECTION('',(0.,1.,0.)); +#330006 = ADVANCED_FACE('',(#330007),#330017,.F.); +#330007 = FACE_BOUND('',#330008,.T.); +#330008 = EDGE_LOOP('',(#330009,#330010,#330011,#330012,#330013,#330014, + #330015,#330016)); +#330009 = ORIENTED_EDGE('',*,*,#329781,.T.); +#330010 = ORIENTED_EDGE('',*,*,#329813,.T.); +#330011 = ORIENTED_EDGE('',*,*,#329845,.T.); +#330012 = ORIENTED_EDGE('',*,*,#329877,.T.); +#330013 = ORIENTED_EDGE('',*,*,#329909,.T.); +#330014 = ORIENTED_EDGE('',*,*,#329941,.T.); +#330015 = ORIENTED_EDGE('',*,*,#329973,.T.); +#330016 = ORIENTED_EDGE('',*,*,#329996,.T.); +#330017 = PLANE('',#330018); +#330018 = AXIS2_PLACEMENT_3D('',#330019,#330020,#330021); +#330019 = CARTESIAN_POINT('',(0.,0.,1.51)); +#330020 = DIRECTION('',(0.,0.,1.)); +#330021 = DIRECTION('',(1.,0.,-0.)); +#330022 = ADVANCED_FACE('',(#330023),#330033,.T.); +#330023 = FACE_BOUND('',#330024,.F.); +#330024 = EDGE_LOOP('',(#330025,#330026,#330027,#330028,#330029,#330030, + #330031,#330032)); +#330025 = ORIENTED_EDGE('',*,*,#329764,.T.); +#330026 = ORIENTED_EDGE('',*,*,#329797,.T.); +#330027 = ORIENTED_EDGE('',*,*,#329828,.T.); +#330028 = ORIENTED_EDGE('',*,*,#329861,.T.); +#330029 = ORIENTED_EDGE('',*,*,#329892,.T.); +#330030 = ORIENTED_EDGE('',*,*,#329925,.T.); +#330031 = ORIENTED_EDGE('',*,*,#329956,.T.); +#330032 = ORIENTED_EDGE('',*,*,#329989,.T.); +#330033 = PLANE('',#330034); +#330034 = AXIS2_PLACEMENT_3D('',#330035,#330036,#330037); +#330035 = CARTESIAN_POINT('',(0.,0.,1.55)); +#330036 = DIRECTION('',(0.,0.,1.)); +#330037 = DIRECTION('',(1.,0.,-0.)); +#330038 = MANIFOLD_SOLID_BREP('',#330039); +#330039 = CLOSED_SHELL('',(#330040,#330082,#330113,#330146,#330177, + #330210,#330241,#330274,#330296,#330312)); +#330040 = ADVANCED_FACE('',(#330041),#330077,.T.); +#330041 = FACE_BOUND('',#330042,.T.); +#330042 = EDGE_LOOP('',(#330043,#330053,#330062,#330070)); +#330043 = ORIENTED_EDGE('',*,*,#330044,.T.); +#330044 = EDGE_CURVE('',#330045,#330047,#330049,.T.); +#330045 = VERTEX_POINT('',#330046); +#330046 = CARTESIAN_POINT('',(121.15,-60.475,1.51)); +#330047 = VERTEX_POINT('',#330048); +#330048 = CARTESIAN_POINT('',(121.15,-60.475,1.55)); +#330049 = LINE('',#330050,#330051); +#330050 = CARTESIAN_POINT('',(121.15,-60.475,1.51)); +#330051 = VECTOR('',#330052,1.); +#330052 = DIRECTION('',(0.,0.,1.)); +#330053 = ORIENTED_EDGE('',*,*,#330054,.T.); +#330054 = EDGE_CURVE('',#330047,#330055,#330057,.T.); +#330055 = VERTEX_POINT('',#330056); +#330056 = CARTESIAN_POINT('',(121.375,-60.25,1.55)); +#330057 = CIRCLE('',#330058,0.225000087974); +#330058 = AXIS2_PLACEMENT_3D('',#330059,#330060,#330061); +#330059 = CARTESIAN_POINT('',(121.37500008797,-60.47500008797,1.55)); +#330060 = DIRECTION('',(0.,0.,-1.)); +#330061 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#330062 = ORIENTED_EDGE('',*,*,#330063,.F.); +#330063 = EDGE_CURVE('',#330064,#330055,#330066,.T.); +#330064 = VERTEX_POINT('',#330065); +#330065 = CARTESIAN_POINT('',(121.375,-60.25,1.51)); +#330066 = LINE('',#330067,#330068); +#330067 = CARTESIAN_POINT('',(121.375,-60.25,1.51)); +#330068 = VECTOR('',#330069,1.); +#330069 = DIRECTION('',(0.,0.,1.)); +#330070 = ORIENTED_EDGE('',*,*,#330071,.F.); +#330071 = EDGE_CURVE('',#330045,#330064,#330072,.T.); +#330072 = CIRCLE('',#330073,0.225000087974); +#330073 = AXIS2_PLACEMENT_3D('',#330074,#330075,#330076); +#330074 = CARTESIAN_POINT('',(121.37500008797,-60.47500008797,1.51)); +#330075 = DIRECTION('',(0.,0.,-1.)); +#330076 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#330077 = CYLINDRICAL_SURFACE('',#330078,0.225000087974); +#330078 = AXIS2_PLACEMENT_3D('',#330079,#330080,#330081); +#330079 = CARTESIAN_POINT('',(121.37500008797,-60.47500008797,1.51)); +#330080 = DIRECTION('',(0.,0.,-1.)); +#330081 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#330082 = ADVANCED_FACE('',(#330083),#330108,.T.); +#330083 = FACE_BOUND('',#330084,.T.); +#330084 = EDGE_LOOP('',(#330085,#330086,#330094,#330102)); +#330085 = ORIENTED_EDGE('',*,*,#330063,.T.); +#330086 = ORIENTED_EDGE('',*,*,#330087,.T.); +#330087 = EDGE_CURVE('',#330055,#330088,#330090,.T.); +#330088 = VERTEX_POINT('',#330089); +#330089 = CARTESIAN_POINT('',(122.225,-60.25,1.55)); +#330090 = LINE('',#330091,#330092); +#330091 = CARTESIAN_POINT('',(121.375,-60.25,1.55)); +#330092 = VECTOR('',#330093,1.); +#330093 = DIRECTION('',(1.,0.,0.)); +#330094 = ORIENTED_EDGE('',*,*,#330095,.F.); +#330095 = EDGE_CURVE('',#330096,#330088,#330098,.T.); +#330096 = VERTEX_POINT('',#330097); +#330097 = CARTESIAN_POINT('',(122.225,-60.25,1.51)); +#330098 = LINE('',#330099,#330100); +#330099 = CARTESIAN_POINT('',(122.225,-60.25,1.51)); +#330100 = VECTOR('',#330101,1.); +#330101 = DIRECTION('',(0.,0.,1.)); +#330102 = ORIENTED_EDGE('',*,*,#330103,.F.); +#330103 = EDGE_CURVE('',#330064,#330096,#330104,.T.); +#330104 = LINE('',#330105,#330106); +#330105 = CARTESIAN_POINT('',(121.375,-60.25,1.51)); +#330106 = VECTOR('',#330107,1.); +#330107 = DIRECTION('',(1.,0.,0.)); +#330108 = PLANE('',#330109); +#330109 = AXIS2_PLACEMENT_3D('',#330110,#330111,#330112); +#330110 = CARTESIAN_POINT('',(121.375,-60.25,1.51)); +#330111 = DIRECTION('',(0.,1.,0.)); +#330112 = DIRECTION('',(1.,0.,0.)); +#330113 = ADVANCED_FACE('',(#330114),#330141,.T.); +#330114 = FACE_BOUND('',#330115,.T.); +#330115 = EDGE_LOOP('',(#330116,#330117,#330126,#330134)); +#330116 = ORIENTED_EDGE('',*,*,#330095,.T.); +#330117 = ORIENTED_EDGE('',*,*,#330118,.T.); +#330118 = EDGE_CURVE('',#330088,#330119,#330121,.T.); +#330119 = VERTEX_POINT('',#330120); +#330120 = CARTESIAN_POINT('',(122.45,-60.475,1.55)); +#330121 = CIRCLE('',#330122,0.225000087974); +#330122 = AXIS2_PLACEMENT_3D('',#330123,#330124,#330125); +#330123 = CARTESIAN_POINT('',(122.22499991202,-60.47500008797,1.55)); +#330124 = DIRECTION('',(0.,0.,-1.)); +#330125 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#330126 = ORIENTED_EDGE('',*,*,#330127,.F.); +#330127 = EDGE_CURVE('',#330128,#330119,#330130,.T.); +#330128 = VERTEX_POINT('',#330129); +#330129 = CARTESIAN_POINT('',(122.45,-60.475,1.51)); +#330130 = LINE('',#330131,#330132); +#330131 = CARTESIAN_POINT('',(122.45,-60.475,1.51)); +#330132 = VECTOR('',#330133,1.); +#330133 = DIRECTION('',(0.,0.,1.)); +#330134 = ORIENTED_EDGE('',*,*,#330135,.F.); +#330135 = EDGE_CURVE('',#330096,#330128,#330136,.T.); +#330136 = CIRCLE('',#330137,0.225000087974); +#330137 = AXIS2_PLACEMENT_3D('',#330138,#330139,#330140); +#330138 = CARTESIAN_POINT('',(122.22499991202,-60.47500008797,1.51)); +#330139 = DIRECTION('',(0.,0.,-1.)); +#330140 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#330141 = CYLINDRICAL_SURFACE('',#330142,0.225000087974); +#330142 = AXIS2_PLACEMENT_3D('',#330143,#330144,#330145); +#330143 = CARTESIAN_POINT('',(122.22499991202,-60.47500008797,1.51)); +#330144 = DIRECTION('',(0.,0.,-1.)); +#330145 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#330146 = ADVANCED_FACE('',(#330147),#330172,.T.); +#330147 = FACE_BOUND('',#330148,.T.); +#330148 = EDGE_LOOP('',(#330149,#330150,#330158,#330166)); +#330149 = ORIENTED_EDGE('',*,*,#330127,.T.); +#330150 = ORIENTED_EDGE('',*,*,#330151,.T.); +#330151 = EDGE_CURVE('',#330119,#330152,#330154,.T.); +#330152 = VERTEX_POINT('',#330153); +#330153 = CARTESIAN_POINT('',(122.45,-60.925,1.55)); +#330154 = LINE('',#330155,#330156); +#330155 = CARTESIAN_POINT('',(122.45,-60.475,1.55)); +#330156 = VECTOR('',#330157,1.); +#330157 = DIRECTION('',(0.,-1.,0.)); +#330158 = ORIENTED_EDGE('',*,*,#330159,.F.); +#330159 = EDGE_CURVE('',#330160,#330152,#330162,.T.); +#330160 = VERTEX_POINT('',#330161); +#330161 = CARTESIAN_POINT('',(122.45,-60.925,1.51)); +#330162 = LINE('',#330163,#330164); +#330163 = CARTESIAN_POINT('',(122.45,-60.925,1.51)); +#330164 = VECTOR('',#330165,1.); +#330165 = DIRECTION('',(0.,0.,1.)); +#330166 = ORIENTED_EDGE('',*,*,#330167,.F.); +#330167 = EDGE_CURVE('',#330128,#330160,#330168,.T.); +#330168 = LINE('',#330169,#330170); +#330169 = CARTESIAN_POINT('',(122.45,-60.475,1.51)); +#330170 = VECTOR('',#330171,1.); +#330171 = DIRECTION('',(0.,-1.,0.)); +#330172 = PLANE('',#330173); +#330173 = AXIS2_PLACEMENT_3D('',#330174,#330175,#330176); +#330174 = CARTESIAN_POINT('',(122.45,-60.475,1.51)); +#330175 = DIRECTION('',(1.,0.,-0.)); +#330176 = DIRECTION('',(0.,-1.,0.)); +#330177 = ADVANCED_FACE('',(#330178),#330205,.T.); +#330178 = FACE_BOUND('',#330179,.T.); +#330179 = EDGE_LOOP('',(#330180,#330181,#330190,#330198)); +#330180 = ORIENTED_EDGE('',*,*,#330159,.T.); +#330181 = ORIENTED_EDGE('',*,*,#330182,.T.); +#330182 = EDGE_CURVE('',#330152,#330183,#330185,.T.); +#330183 = VERTEX_POINT('',#330184); +#330184 = CARTESIAN_POINT('',(122.225,-61.15,1.55)); +#330185 = CIRCLE('',#330186,0.225000087974); +#330186 = AXIS2_PLACEMENT_3D('',#330187,#330188,#330189); +#330187 = CARTESIAN_POINT('',(122.22499991202,-60.92499991202,1.55)); +#330188 = DIRECTION('',(0.,0.,-1.)); +#330189 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#330190 = ORIENTED_EDGE('',*,*,#330191,.F.); +#330191 = EDGE_CURVE('',#330192,#330183,#330194,.T.); +#330192 = VERTEX_POINT('',#330193); +#330193 = CARTESIAN_POINT('',(122.225,-61.15,1.51)); +#330194 = LINE('',#330195,#330196); +#330195 = CARTESIAN_POINT('',(122.225,-61.15,1.51)); +#330196 = VECTOR('',#330197,1.); +#330197 = DIRECTION('',(0.,0.,1.)); +#330198 = ORIENTED_EDGE('',*,*,#330199,.F.); +#330199 = EDGE_CURVE('',#330160,#330192,#330200,.T.); +#330200 = CIRCLE('',#330201,0.225000087974); +#330201 = AXIS2_PLACEMENT_3D('',#330202,#330203,#330204); +#330202 = CARTESIAN_POINT('',(122.22499991202,-60.92499991202,1.51)); +#330203 = DIRECTION('',(0.,0.,-1.)); +#330204 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#330205 = CYLINDRICAL_SURFACE('',#330206,0.225000087974); +#330206 = AXIS2_PLACEMENT_3D('',#330207,#330208,#330209); +#330207 = CARTESIAN_POINT('',(122.22499991202,-60.92499991202,1.51)); +#330208 = DIRECTION('',(0.,0.,-1.)); +#330209 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#330210 = ADVANCED_FACE('',(#330211),#330236,.T.); +#330211 = FACE_BOUND('',#330212,.T.); +#330212 = EDGE_LOOP('',(#330213,#330214,#330222,#330230)); +#330213 = ORIENTED_EDGE('',*,*,#330191,.T.); +#330214 = ORIENTED_EDGE('',*,*,#330215,.T.); +#330215 = EDGE_CURVE('',#330183,#330216,#330218,.T.); +#330216 = VERTEX_POINT('',#330217); +#330217 = CARTESIAN_POINT('',(121.375,-61.15,1.55)); +#330218 = LINE('',#330219,#330220); +#330219 = CARTESIAN_POINT('',(122.225,-61.15,1.55)); +#330220 = VECTOR('',#330221,1.); +#330221 = DIRECTION('',(-1.,0.,0.)); +#330222 = ORIENTED_EDGE('',*,*,#330223,.F.); +#330223 = EDGE_CURVE('',#330224,#330216,#330226,.T.); +#330224 = VERTEX_POINT('',#330225); +#330225 = CARTESIAN_POINT('',(121.375,-61.15,1.51)); +#330226 = LINE('',#330227,#330228); +#330227 = CARTESIAN_POINT('',(121.375,-61.15,1.51)); +#330228 = VECTOR('',#330229,1.); +#330229 = DIRECTION('',(0.,0.,1.)); +#330230 = ORIENTED_EDGE('',*,*,#330231,.F.); +#330231 = EDGE_CURVE('',#330192,#330224,#330232,.T.); +#330232 = LINE('',#330233,#330234); +#330233 = CARTESIAN_POINT('',(122.225,-61.15,1.51)); +#330234 = VECTOR('',#330235,1.); +#330235 = DIRECTION('',(-1.,0.,0.)); +#330236 = PLANE('',#330237); +#330237 = AXIS2_PLACEMENT_3D('',#330238,#330239,#330240); +#330238 = CARTESIAN_POINT('',(122.225,-61.15,1.51)); +#330239 = DIRECTION('',(0.,-1.,0.)); +#330240 = DIRECTION('',(-1.,0.,0.)); +#330241 = ADVANCED_FACE('',(#330242),#330269,.T.); +#330242 = FACE_BOUND('',#330243,.T.); +#330243 = EDGE_LOOP('',(#330244,#330245,#330254,#330262)); +#330244 = ORIENTED_EDGE('',*,*,#330223,.T.); +#330245 = ORIENTED_EDGE('',*,*,#330246,.T.); +#330246 = EDGE_CURVE('',#330216,#330247,#330249,.T.); +#330247 = VERTEX_POINT('',#330248); +#330248 = CARTESIAN_POINT('',(121.15,-60.925,1.55)); +#330249 = CIRCLE('',#330250,0.225000087974); +#330250 = AXIS2_PLACEMENT_3D('',#330251,#330252,#330253); +#330251 = CARTESIAN_POINT('',(121.37500008797,-60.92499991202,1.55)); +#330252 = DIRECTION('',(0.,0.,-1.)); +#330253 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330254 = ORIENTED_EDGE('',*,*,#330255,.F.); +#330255 = EDGE_CURVE('',#330256,#330247,#330258,.T.); +#330256 = VERTEX_POINT('',#330257); +#330257 = CARTESIAN_POINT('',(121.15,-60.925,1.51)); +#330258 = LINE('',#330259,#330260); +#330259 = CARTESIAN_POINT('',(121.15,-60.925,1.51)); +#330260 = VECTOR('',#330261,1.); +#330261 = DIRECTION('',(0.,0.,1.)); +#330262 = ORIENTED_EDGE('',*,*,#330263,.F.); +#330263 = EDGE_CURVE('',#330224,#330256,#330264,.T.); +#330264 = CIRCLE('',#330265,0.225000087974); +#330265 = AXIS2_PLACEMENT_3D('',#330266,#330267,#330268); +#330266 = CARTESIAN_POINT('',(121.37500008797,-60.92499991202,1.51)); +#330267 = DIRECTION('',(0.,0.,-1.)); +#330268 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330269 = CYLINDRICAL_SURFACE('',#330270,0.225000087974); +#330270 = AXIS2_PLACEMENT_3D('',#330271,#330272,#330273); +#330271 = CARTESIAN_POINT('',(121.37500008797,-60.92499991202,1.51)); +#330272 = DIRECTION('',(0.,0.,-1.)); +#330273 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330274 = ADVANCED_FACE('',(#330275),#330291,.T.); +#330275 = FACE_BOUND('',#330276,.T.); +#330276 = EDGE_LOOP('',(#330277,#330278,#330284,#330285)); +#330277 = ORIENTED_EDGE('',*,*,#330255,.T.); +#330278 = ORIENTED_EDGE('',*,*,#330279,.T.); +#330279 = EDGE_CURVE('',#330247,#330047,#330280,.T.); +#330280 = LINE('',#330281,#330282); +#330281 = CARTESIAN_POINT('',(121.15,-60.925,1.55)); +#330282 = VECTOR('',#330283,1.); +#330283 = DIRECTION('',(0.,1.,0.)); +#330284 = ORIENTED_EDGE('',*,*,#330044,.F.); +#330285 = ORIENTED_EDGE('',*,*,#330286,.F.); +#330286 = EDGE_CURVE('',#330256,#330045,#330287,.T.); +#330287 = LINE('',#330288,#330289); +#330288 = CARTESIAN_POINT('',(121.15,-60.925,1.51)); +#330289 = VECTOR('',#330290,1.); +#330290 = DIRECTION('',(0.,1.,0.)); +#330291 = PLANE('',#330292); +#330292 = AXIS2_PLACEMENT_3D('',#330293,#330294,#330295); +#330293 = CARTESIAN_POINT('',(121.15,-60.925,1.51)); +#330294 = DIRECTION('',(-1.,0.,0.)); +#330295 = DIRECTION('',(0.,1.,0.)); +#330296 = ADVANCED_FACE('',(#330297),#330307,.F.); +#330297 = FACE_BOUND('',#330298,.T.); +#330298 = EDGE_LOOP('',(#330299,#330300,#330301,#330302,#330303,#330304, + #330305,#330306)); +#330299 = ORIENTED_EDGE('',*,*,#330071,.T.); +#330300 = ORIENTED_EDGE('',*,*,#330103,.T.); +#330301 = ORIENTED_EDGE('',*,*,#330135,.T.); +#330302 = ORIENTED_EDGE('',*,*,#330167,.T.); +#330303 = ORIENTED_EDGE('',*,*,#330199,.T.); +#330304 = ORIENTED_EDGE('',*,*,#330231,.T.); +#330305 = ORIENTED_EDGE('',*,*,#330263,.T.); +#330306 = ORIENTED_EDGE('',*,*,#330286,.T.); +#330307 = PLANE('',#330308); +#330308 = AXIS2_PLACEMENT_3D('',#330309,#330310,#330311); +#330309 = CARTESIAN_POINT('',(0.,0.,1.51)); +#330310 = DIRECTION('',(0.,0.,1.)); +#330311 = DIRECTION('',(1.,0.,-0.)); +#330312 = ADVANCED_FACE('',(#330313),#330323,.T.); +#330313 = FACE_BOUND('',#330314,.F.); +#330314 = EDGE_LOOP('',(#330315,#330316,#330317,#330318,#330319,#330320, + #330321,#330322)); +#330315 = ORIENTED_EDGE('',*,*,#330054,.T.); +#330316 = ORIENTED_EDGE('',*,*,#330087,.T.); +#330317 = ORIENTED_EDGE('',*,*,#330118,.T.); +#330318 = ORIENTED_EDGE('',*,*,#330151,.T.); +#330319 = ORIENTED_EDGE('',*,*,#330182,.T.); +#330320 = ORIENTED_EDGE('',*,*,#330215,.T.); +#330321 = ORIENTED_EDGE('',*,*,#330246,.T.); +#330322 = ORIENTED_EDGE('',*,*,#330279,.T.); +#330323 = PLANE('',#330324); +#330324 = AXIS2_PLACEMENT_3D('',#330325,#330326,#330327); +#330325 = CARTESIAN_POINT('',(0.,0.,1.55)); +#330326 = DIRECTION('',(0.,0.,1.)); +#330327 = DIRECTION('',(1.,0.,-0.)); +#330328 = MANIFOLD_SOLID_BREP('',#330329); +#330329 = CLOSED_SHELL('',(#330330,#330370,#330401,#330432,#330454, + #330466)); +#330330 = ADVANCED_FACE('',(#330331),#330365,.T.); +#330331 = FACE_BOUND('',#330332,.T.); +#330332 = EDGE_LOOP('',(#330333,#330343,#330351,#330359)); +#330333 = ORIENTED_EDGE('',*,*,#330334,.T.); +#330334 = EDGE_CURVE('',#330335,#330337,#330339,.T.); +#330335 = VERTEX_POINT('',#330336); +#330336 = CARTESIAN_POINT('',(130.565,-83.16,1.51)); +#330337 = VERTEX_POINT('',#330338); +#330338 = CARTESIAN_POINT('',(130.565,-83.16,1.55)); +#330339 = LINE('',#330340,#330341); +#330340 = CARTESIAN_POINT('',(130.565,-83.16,1.51)); +#330341 = VECTOR('',#330342,1.); +#330342 = DIRECTION('',(0.,0.,1.)); +#330343 = ORIENTED_EDGE('',*,*,#330344,.T.); +#330344 = EDGE_CURVE('',#330337,#330345,#330347,.T.); +#330345 = VERTEX_POINT('',#330346); +#330346 = CARTESIAN_POINT('',(130.565,-81.66,1.55)); +#330347 = LINE('',#330348,#330349); +#330348 = CARTESIAN_POINT('',(130.565,-83.16,1.55)); +#330349 = VECTOR('',#330350,1.); +#330350 = DIRECTION('',(0.,1.,0.)); +#330351 = ORIENTED_EDGE('',*,*,#330352,.F.); +#330352 = EDGE_CURVE('',#330353,#330345,#330355,.T.); +#330353 = VERTEX_POINT('',#330354); +#330354 = CARTESIAN_POINT('',(130.565,-81.66,1.51)); +#330355 = LINE('',#330356,#330357); +#330356 = CARTESIAN_POINT('',(130.565,-81.66,1.51)); +#330357 = VECTOR('',#330358,1.); +#330358 = DIRECTION('',(0.,0.,1.)); +#330359 = ORIENTED_EDGE('',*,*,#330360,.F.); +#330360 = EDGE_CURVE('',#330335,#330353,#330361,.T.); +#330361 = LINE('',#330362,#330363); +#330362 = CARTESIAN_POINT('',(130.565,-83.16,1.51)); +#330363 = VECTOR('',#330364,1.); +#330364 = DIRECTION('',(0.,1.,0.)); +#330365 = PLANE('',#330366); +#330366 = AXIS2_PLACEMENT_3D('',#330367,#330368,#330369); +#330367 = CARTESIAN_POINT('',(130.565,-83.16,1.51)); +#330368 = DIRECTION('',(-1.,0.,0.)); +#330369 = DIRECTION('',(0.,1.,0.)); +#330370 = ADVANCED_FACE('',(#330371),#330396,.T.); +#330371 = FACE_BOUND('',#330372,.T.); +#330372 = EDGE_LOOP('',(#330373,#330374,#330382,#330390)); +#330373 = ORIENTED_EDGE('',*,*,#330352,.T.); +#330374 = ORIENTED_EDGE('',*,*,#330375,.T.); +#330375 = EDGE_CURVE('',#330345,#330376,#330378,.T.); +#330376 = VERTEX_POINT('',#330377); +#330377 = CARTESIAN_POINT('',(131.465,-81.66,1.55)); +#330378 = LINE('',#330379,#330380); +#330379 = CARTESIAN_POINT('',(130.565,-81.66,1.55)); +#330380 = VECTOR('',#330381,1.); +#330381 = DIRECTION('',(1.,0.,0.)); +#330382 = ORIENTED_EDGE('',*,*,#330383,.F.); +#330383 = EDGE_CURVE('',#330384,#330376,#330386,.T.); +#330384 = VERTEX_POINT('',#330385); +#330385 = CARTESIAN_POINT('',(131.465,-81.66,1.51)); +#330386 = LINE('',#330387,#330388); +#330387 = CARTESIAN_POINT('',(131.465,-81.66,1.51)); +#330388 = VECTOR('',#330389,1.); +#330389 = DIRECTION('',(0.,0.,1.)); +#330390 = ORIENTED_EDGE('',*,*,#330391,.F.); +#330391 = EDGE_CURVE('',#330353,#330384,#330392,.T.); +#330392 = LINE('',#330393,#330394); +#330393 = CARTESIAN_POINT('',(130.565,-81.66,1.51)); +#330394 = VECTOR('',#330395,1.); +#330395 = DIRECTION('',(1.,0.,0.)); +#330396 = PLANE('',#330397); +#330397 = AXIS2_PLACEMENT_3D('',#330398,#330399,#330400); +#330398 = CARTESIAN_POINT('',(130.565,-81.66,1.51)); +#330399 = DIRECTION('',(0.,1.,0.)); +#330400 = DIRECTION('',(1.,0.,0.)); +#330401 = ADVANCED_FACE('',(#330402),#330427,.T.); +#330402 = FACE_BOUND('',#330403,.T.); +#330403 = EDGE_LOOP('',(#330404,#330405,#330413,#330421)); +#330404 = ORIENTED_EDGE('',*,*,#330383,.T.); +#330405 = ORIENTED_EDGE('',*,*,#330406,.T.); +#330406 = EDGE_CURVE('',#330376,#330407,#330409,.T.); +#330407 = VERTEX_POINT('',#330408); +#330408 = CARTESIAN_POINT('',(131.465,-83.16,1.55)); +#330409 = LINE('',#330410,#330411); +#330410 = CARTESIAN_POINT('',(131.465,-81.66,1.55)); +#330411 = VECTOR('',#330412,1.); +#330412 = DIRECTION('',(0.,-1.,0.)); +#330413 = ORIENTED_EDGE('',*,*,#330414,.F.); +#330414 = EDGE_CURVE('',#330415,#330407,#330417,.T.); +#330415 = VERTEX_POINT('',#330416); +#330416 = CARTESIAN_POINT('',(131.465,-83.16,1.51)); +#330417 = LINE('',#330418,#330419); +#330418 = CARTESIAN_POINT('',(131.465,-83.16,1.51)); +#330419 = VECTOR('',#330420,1.); +#330420 = DIRECTION('',(0.,0.,1.)); +#330421 = ORIENTED_EDGE('',*,*,#330422,.F.); +#330422 = EDGE_CURVE('',#330384,#330415,#330423,.T.); +#330423 = LINE('',#330424,#330425); +#330424 = CARTESIAN_POINT('',(131.465,-81.66,1.51)); +#330425 = VECTOR('',#330426,1.); +#330426 = DIRECTION('',(0.,-1.,0.)); +#330427 = PLANE('',#330428); +#330428 = AXIS2_PLACEMENT_3D('',#330429,#330430,#330431); +#330429 = CARTESIAN_POINT('',(131.465,-81.66,1.51)); +#330430 = DIRECTION('',(1.,0.,-0.)); +#330431 = DIRECTION('',(0.,-1.,0.)); +#330432 = ADVANCED_FACE('',(#330433),#330449,.T.); +#330433 = FACE_BOUND('',#330434,.T.); +#330434 = EDGE_LOOP('',(#330435,#330436,#330442,#330443)); +#330435 = ORIENTED_EDGE('',*,*,#330414,.T.); +#330436 = ORIENTED_EDGE('',*,*,#330437,.T.); +#330437 = EDGE_CURVE('',#330407,#330337,#330438,.T.); +#330438 = LINE('',#330439,#330440); +#330439 = CARTESIAN_POINT('',(131.465,-83.16,1.55)); +#330440 = VECTOR('',#330441,1.); +#330441 = DIRECTION('',(-1.,0.,0.)); +#330442 = ORIENTED_EDGE('',*,*,#330334,.F.); +#330443 = ORIENTED_EDGE('',*,*,#330444,.F.); +#330444 = EDGE_CURVE('',#330415,#330335,#330445,.T.); +#330445 = LINE('',#330446,#330447); +#330446 = CARTESIAN_POINT('',(131.465,-83.16,1.51)); +#330447 = VECTOR('',#330448,1.); +#330448 = DIRECTION('',(-1.,0.,0.)); +#330449 = PLANE('',#330450); +#330450 = AXIS2_PLACEMENT_3D('',#330451,#330452,#330453); +#330451 = CARTESIAN_POINT('',(131.465,-83.16,1.51)); +#330452 = DIRECTION('',(0.,-1.,0.)); +#330453 = DIRECTION('',(-1.,0.,0.)); +#330454 = ADVANCED_FACE('',(#330455),#330461,.F.); +#330455 = FACE_BOUND('',#330456,.T.); +#330456 = EDGE_LOOP('',(#330457,#330458,#330459,#330460)); +#330457 = ORIENTED_EDGE('',*,*,#330360,.T.); +#330458 = ORIENTED_EDGE('',*,*,#330391,.T.); +#330459 = ORIENTED_EDGE('',*,*,#330422,.T.); +#330460 = ORIENTED_EDGE('',*,*,#330444,.T.); +#330461 = PLANE('',#330462); +#330462 = AXIS2_PLACEMENT_3D('',#330463,#330464,#330465); +#330463 = CARTESIAN_POINT('',(0.,0.,1.51)); +#330464 = DIRECTION('',(0.,0.,1.)); +#330465 = DIRECTION('',(1.,0.,-0.)); +#330466 = ADVANCED_FACE('',(#330467),#330473,.T.); +#330467 = FACE_BOUND('',#330468,.F.); +#330468 = EDGE_LOOP('',(#330469,#330470,#330471,#330472)); +#330469 = ORIENTED_EDGE('',*,*,#330344,.T.); +#330470 = ORIENTED_EDGE('',*,*,#330375,.T.); +#330471 = ORIENTED_EDGE('',*,*,#330406,.T.); +#330472 = ORIENTED_EDGE('',*,*,#330437,.T.); +#330473 = PLANE('',#330474); +#330474 = AXIS2_PLACEMENT_3D('',#330475,#330476,#330477); +#330475 = CARTESIAN_POINT('',(0.,0.,1.55)); +#330476 = DIRECTION('',(0.,0.,1.)); +#330477 = DIRECTION('',(1.,0.,-0.)); +#330478 = MANIFOLD_SOLID_BREP('',#330479); +#330479 = CLOSED_SHELL('',(#330480,#330520,#330551,#330582,#330604, + #330616)); +#330480 = ADVANCED_FACE('',(#330481),#330515,.T.); +#330481 = FACE_BOUND('',#330482,.T.); +#330482 = EDGE_LOOP('',(#330483,#330493,#330501,#330509)); +#330483 = ORIENTED_EDGE('',*,*,#330484,.T.); +#330484 = EDGE_CURVE('',#330485,#330487,#330489,.T.); +#330485 = VERTEX_POINT('',#330486); +#330486 = CARTESIAN_POINT('',(144.535,-83.16,1.51)); +#330487 = VERTEX_POINT('',#330488); +#330488 = CARTESIAN_POINT('',(144.535,-83.16,1.55)); +#330489 = LINE('',#330490,#330491); +#330490 = CARTESIAN_POINT('',(144.535,-83.16,1.51)); +#330491 = VECTOR('',#330492,1.); +#330492 = DIRECTION('',(0.,0.,1.)); +#330493 = ORIENTED_EDGE('',*,*,#330494,.T.); +#330494 = EDGE_CURVE('',#330487,#330495,#330497,.T.); +#330495 = VERTEX_POINT('',#330496); +#330496 = CARTESIAN_POINT('',(144.535,-81.66,1.55)); +#330497 = LINE('',#330498,#330499); +#330498 = CARTESIAN_POINT('',(144.535,-83.16,1.55)); +#330499 = VECTOR('',#330500,1.); +#330500 = DIRECTION('',(0.,1.,0.)); +#330501 = ORIENTED_EDGE('',*,*,#330502,.F.); +#330502 = EDGE_CURVE('',#330503,#330495,#330505,.T.); +#330503 = VERTEX_POINT('',#330504); +#330504 = CARTESIAN_POINT('',(144.535,-81.66,1.51)); +#330505 = LINE('',#330506,#330507); +#330506 = CARTESIAN_POINT('',(144.535,-81.66,1.51)); +#330507 = VECTOR('',#330508,1.); +#330508 = DIRECTION('',(0.,0.,1.)); +#330509 = ORIENTED_EDGE('',*,*,#330510,.F.); +#330510 = EDGE_CURVE('',#330485,#330503,#330511,.T.); +#330511 = LINE('',#330512,#330513); +#330512 = CARTESIAN_POINT('',(144.535,-83.16,1.51)); +#330513 = VECTOR('',#330514,1.); +#330514 = DIRECTION('',(0.,1.,0.)); +#330515 = PLANE('',#330516); +#330516 = AXIS2_PLACEMENT_3D('',#330517,#330518,#330519); +#330517 = CARTESIAN_POINT('',(144.535,-83.16,1.51)); +#330518 = DIRECTION('',(-1.,0.,0.)); +#330519 = DIRECTION('',(0.,1.,0.)); +#330520 = ADVANCED_FACE('',(#330521),#330546,.T.); +#330521 = FACE_BOUND('',#330522,.T.); +#330522 = EDGE_LOOP('',(#330523,#330524,#330532,#330540)); +#330523 = ORIENTED_EDGE('',*,*,#330502,.T.); +#330524 = ORIENTED_EDGE('',*,*,#330525,.T.); +#330525 = EDGE_CURVE('',#330495,#330526,#330528,.T.); +#330526 = VERTEX_POINT('',#330527); +#330527 = CARTESIAN_POINT('',(145.435,-81.66,1.55)); +#330528 = LINE('',#330529,#330530); +#330529 = CARTESIAN_POINT('',(144.535,-81.66,1.55)); +#330530 = VECTOR('',#330531,1.); +#330531 = DIRECTION('',(1.,0.,0.)); +#330532 = ORIENTED_EDGE('',*,*,#330533,.F.); +#330533 = EDGE_CURVE('',#330534,#330526,#330536,.T.); +#330534 = VERTEX_POINT('',#330535); +#330535 = CARTESIAN_POINT('',(145.435,-81.66,1.51)); +#330536 = LINE('',#330537,#330538); +#330537 = CARTESIAN_POINT('',(145.435,-81.66,1.51)); +#330538 = VECTOR('',#330539,1.); +#330539 = DIRECTION('',(0.,0.,1.)); +#330540 = ORIENTED_EDGE('',*,*,#330541,.F.); +#330541 = EDGE_CURVE('',#330503,#330534,#330542,.T.); +#330542 = LINE('',#330543,#330544); +#330543 = CARTESIAN_POINT('',(144.535,-81.66,1.51)); +#330544 = VECTOR('',#330545,1.); +#330545 = DIRECTION('',(1.,0.,0.)); +#330546 = PLANE('',#330547); +#330547 = AXIS2_PLACEMENT_3D('',#330548,#330549,#330550); +#330548 = CARTESIAN_POINT('',(144.535,-81.66,1.51)); +#330549 = DIRECTION('',(0.,1.,0.)); +#330550 = DIRECTION('',(1.,0.,0.)); +#330551 = ADVANCED_FACE('',(#330552),#330577,.T.); +#330552 = FACE_BOUND('',#330553,.T.); +#330553 = EDGE_LOOP('',(#330554,#330555,#330563,#330571)); +#330554 = ORIENTED_EDGE('',*,*,#330533,.T.); +#330555 = ORIENTED_EDGE('',*,*,#330556,.T.); +#330556 = EDGE_CURVE('',#330526,#330557,#330559,.T.); +#330557 = VERTEX_POINT('',#330558); +#330558 = CARTESIAN_POINT('',(145.435,-83.16,1.55)); +#330559 = LINE('',#330560,#330561); +#330560 = CARTESIAN_POINT('',(145.435,-81.66,1.55)); +#330561 = VECTOR('',#330562,1.); +#330562 = DIRECTION('',(0.,-1.,0.)); +#330563 = ORIENTED_EDGE('',*,*,#330564,.F.); +#330564 = EDGE_CURVE('',#330565,#330557,#330567,.T.); +#330565 = VERTEX_POINT('',#330566); +#330566 = CARTESIAN_POINT('',(145.435,-83.16,1.51)); +#330567 = LINE('',#330568,#330569); +#330568 = CARTESIAN_POINT('',(145.435,-83.16,1.51)); +#330569 = VECTOR('',#330570,1.); +#330570 = DIRECTION('',(0.,0.,1.)); +#330571 = ORIENTED_EDGE('',*,*,#330572,.F.); +#330572 = EDGE_CURVE('',#330534,#330565,#330573,.T.); +#330573 = LINE('',#330574,#330575); +#330574 = CARTESIAN_POINT('',(145.435,-81.66,1.51)); +#330575 = VECTOR('',#330576,1.); +#330576 = DIRECTION('',(0.,-1.,0.)); +#330577 = PLANE('',#330578); +#330578 = AXIS2_PLACEMENT_3D('',#330579,#330580,#330581); +#330579 = CARTESIAN_POINT('',(145.435,-81.66,1.51)); +#330580 = DIRECTION('',(1.,0.,-0.)); +#330581 = DIRECTION('',(0.,-1.,0.)); +#330582 = ADVANCED_FACE('',(#330583),#330599,.T.); +#330583 = FACE_BOUND('',#330584,.T.); +#330584 = EDGE_LOOP('',(#330585,#330586,#330592,#330593)); +#330585 = ORIENTED_EDGE('',*,*,#330564,.T.); +#330586 = ORIENTED_EDGE('',*,*,#330587,.T.); +#330587 = EDGE_CURVE('',#330557,#330487,#330588,.T.); +#330588 = LINE('',#330589,#330590); +#330589 = CARTESIAN_POINT('',(145.435,-83.16,1.55)); +#330590 = VECTOR('',#330591,1.); +#330591 = DIRECTION('',(-1.,0.,0.)); +#330592 = ORIENTED_EDGE('',*,*,#330484,.F.); +#330593 = ORIENTED_EDGE('',*,*,#330594,.F.); +#330594 = EDGE_CURVE('',#330565,#330485,#330595,.T.); +#330595 = LINE('',#330596,#330597); +#330596 = CARTESIAN_POINT('',(145.435,-83.16,1.51)); +#330597 = VECTOR('',#330598,1.); +#330598 = DIRECTION('',(-1.,0.,0.)); +#330599 = PLANE('',#330600); +#330600 = AXIS2_PLACEMENT_3D('',#330601,#330602,#330603); +#330601 = CARTESIAN_POINT('',(145.435,-83.16,1.51)); +#330602 = DIRECTION('',(0.,-1.,0.)); +#330603 = DIRECTION('',(-1.,0.,0.)); +#330604 = ADVANCED_FACE('',(#330605),#330611,.F.); +#330605 = FACE_BOUND('',#330606,.T.); +#330606 = EDGE_LOOP('',(#330607,#330608,#330609,#330610)); +#330607 = ORIENTED_EDGE('',*,*,#330510,.T.); +#330608 = ORIENTED_EDGE('',*,*,#330541,.T.); +#330609 = ORIENTED_EDGE('',*,*,#330572,.T.); +#330610 = ORIENTED_EDGE('',*,*,#330594,.T.); +#330611 = PLANE('',#330612); +#330612 = AXIS2_PLACEMENT_3D('',#330613,#330614,#330615); +#330613 = CARTESIAN_POINT('',(0.,0.,1.51)); +#330614 = DIRECTION('',(0.,0.,1.)); +#330615 = DIRECTION('',(1.,0.,-0.)); +#330616 = ADVANCED_FACE('',(#330617),#330623,.T.); +#330617 = FACE_BOUND('',#330618,.F.); +#330618 = EDGE_LOOP('',(#330619,#330620,#330621,#330622)); +#330619 = ORIENTED_EDGE('',*,*,#330494,.T.); +#330620 = ORIENTED_EDGE('',*,*,#330525,.T.); +#330621 = ORIENTED_EDGE('',*,*,#330556,.T.); +#330622 = ORIENTED_EDGE('',*,*,#330587,.T.); +#330623 = PLANE('',#330624); +#330624 = AXIS2_PLACEMENT_3D('',#330625,#330626,#330627); +#330625 = CARTESIAN_POINT('',(0.,0.,1.55)); +#330626 = DIRECTION('',(0.,0.,1.)); +#330627 = DIRECTION('',(1.,0.,-0.)); +#330628 = MANIFOLD_SOLID_BREP('',#330629); +#330629 = CLOSED_SHELL('',(#330630,#330672,#330703,#330736,#330767, + #330800,#330831,#330864,#330886,#330902)); +#330630 = ADVANCED_FACE('',(#330631),#330667,.T.); +#330631 = FACE_BOUND('',#330632,.T.); +#330632 = EDGE_LOOP('',(#330633,#330643,#330652,#330660)); +#330633 = ORIENTED_EDGE('',*,*,#330634,.T.); +#330634 = EDGE_CURVE('',#330635,#330637,#330639,.T.); +#330635 = VERTEX_POINT('',#330636); +#330636 = CARTESIAN_POINT('',(120.25,-88.225,1.51)); +#330637 = VERTEX_POINT('',#330638); +#330638 = CARTESIAN_POINT('',(120.25,-88.225,1.55)); +#330639 = LINE('',#330640,#330641); +#330640 = CARTESIAN_POINT('',(120.25,-88.225,1.51)); +#330641 = VECTOR('',#330642,1.); +#330642 = DIRECTION('',(0.,0.,1.)); +#330643 = ORIENTED_EDGE('',*,*,#330644,.T.); +#330644 = EDGE_CURVE('',#330637,#330645,#330647,.T.); +#330645 = VERTEX_POINT('',#330646); +#330646 = CARTESIAN_POINT('',(120.475,-88.,1.55)); +#330647 = CIRCLE('',#330648,0.225000087974); +#330648 = AXIS2_PLACEMENT_3D('',#330649,#330650,#330651); +#330649 = CARTESIAN_POINT('',(120.47500008797,-88.22500008797,1.55)); +#330650 = DIRECTION('',(0.,0.,-1.)); +#330651 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330652 = ORIENTED_EDGE('',*,*,#330653,.F.); +#330653 = EDGE_CURVE('',#330654,#330645,#330656,.T.); +#330654 = VERTEX_POINT('',#330655); +#330655 = CARTESIAN_POINT('',(120.475,-88.,1.51)); +#330656 = LINE('',#330657,#330658); +#330657 = CARTESIAN_POINT('',(120.475,-88.,1.51)); +#330658 = VECTOR('',#330659,1.); +#330659 = DIRECTION('',(0.,0.,1.)); +#330660 = ORIENTED_EDGE('',*,*,#330661,.F.); +#330661 = EDGE_CURVE('',#330635,#330654,#330662,.T.); +#330662 = CIRCLE('',#330663,0.225000087974); +#330663 = AXIS2_PLACEMENT_3D('',#330664,#330665,#330666); +#330664 = CARTESIAN_POINT('',(120.47500008797,-88.22500008797,1.51)); +#330665 = DIRECTION('',(0.,0.,-1.)); +#330666 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330667 = CYLINDRICAL_SURFACE('',#330668,0.225000087974); +#330668 = AXIS2_PLACEMENT_3D('',#330669,#330670,#330671); +#330669 = CARTESIAN_POINT('',(120.47500008797,-88.22500008797,1.51)); +#330670 = DIRECTION('',(0.,0.,-1.)); +#330671 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330672 = ADVANCED_FACE('',(#330673),#330698,.T.); +#330673 = FACE_BOUND('',#330674,.T.); +#330674 = EDGE_LOOP('',(#330675,#330676,#330684,#330692)); +#330675 = ORIENTED_EDGE('',*,*,#330653,.T.); +#330676 = ORIENTED_EDGE('',*,*,#330677,.T.); +#330677 = EDGE_CURVE('',#330645,#330678,#330680,.T.); +#330678 = VERTEX_POINT('',#330679); +#330679 = CARTESIAN_POINT('',(120.925,-88.,1.55)); +#330680 = LINE('',#330681,#330682); +#330681 = CARTESIAN_POINT('',(120.475,-88.,1.55)); +#330682 = VECTOR('',#330683,1.); +#330683 = DIRECTION('',(1.,0.,0.)); +#330684 = ORIENTED_EDGE('',*,*,#330685,.F.); +#330685 = EDGE_CURVE('',#330686,#330678,#330688,.T.); +#330686 = VERTEX_POINT('',#330687); +#330687 = CARTESIAN_POINT('',(120.925,-88.,1.51)); +#330688 = LINE('',#330689,#330690); +#330689 = CARTESIAN_POINT('',(120.925,-88.,1.51)); +#330690 = VECTOR('',#330691,1.); +#330691 = DIRECTION('',(0.,0.,1.)); +#330692 = ORIENTED_EDGE('',*,*,#330693,.F.); +#330693 = EDGE_CURVE('',#330654,#330686,#330694,.T.); +#330694 = LINE('',#330695,#330696); +#330695 = CARTESIAN_POINT('',(120.475,-88.,1.51)); +#330696 = VECTOR('',#330697,1.); +#330697 = DIRECTION('',(1.,0.,0.)); +#330698 = PLANE('',#330699); +#330699 = AXIS2_PLACEMENT_3D('',#330700,#330701,#330702); +#330700 = CARTESIAN_POINT('',(120.475,-88.,1.51)); +#330701 = DIRECTION('',(0.,1.,0.)); +#330702 = DIRECTION('',(1.,0.,0.)); +#330703 = ADVANCED_FACE('',(#330704),#330731,.T.); +#330704 = FACE_BOUND('',#330705,.T.); +#330705 = EDGE_LOOP('',(#330706,#330707,#330716,#330724)); +#330706 = ORIENTED_EDGE('',*,*,#330685,.T.); +#330707 = ORIENTED_EDGE('',*,*,#330708,.T.); +#330708 = EDGE_CURVE('',#330678,#330709,#330711,.T.); +#330709 = VERTEX_POINT('',#330710); +#330710 = CARTESIAN_POINT('',(121.15,-88.225,1.55)); +#330711 = CIRCLE('',#330712,0.225000087974); +#330712 = AXIS2_PLACEMENT_3D('',#330713,#330714,#330715); +#330713 = CARTESIAN_POINT('',(120.92499991202,-88.22500008797,1.55)); +#330714 = DIRECTION('',(0.,0.,-1.)); +#330715 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#330716 = ORIENTED_EDGE('',*,*,#330717,.F.); +#330717 = EDGE_CURVE('',#330718,#330709,#330720,.T.); +#330718 = VERTEX_POINT('',#330719); +#330719 = CARTESIAN_POINT('',(121.15,-88.225,1.51)); +#330720 = LINE('',#330721,#330722); +#330721 = CARTESIAN_POINT('',(121.15,-88.225,1.51)); +#330722 = VECTOR('',#330723,1.); +#330723 = DIRECTION('',(0.,0.,1.)); +#330724 = ORIENTED_EDGE('',*,*,#330725,.F.); +#330725 = EDGE_CURVE('',#330686,#330718,#330726,.T.); +#330726 = CIRCLE('',#330727,0.225000087974); +#330727 = AXIS2_PLACEMENT_3D('',#330728,#330729,#330730); +#330728 = CARTESIAN_POINT('',(120.92499991202,-88.22500008797,1.51)); +#330729 = DIRECTION('',(0.,0.,-1.)); +#330730 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#330731 = CYLINDRICAL_SURFACE('',#330732,0.225000087974); +#330732 = AXIS2_PLACEMENT_3D('',#330733,#330734,#330735); +#330733 = CARTESIAN_POINT('',(120.92499991202,-88.22500008797,1.51)); +#330734 = DIRECTION('',(0.,0.,-1.)); +#330735 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#330736 = ADVANCED_FACE('',(#330737),#330762,.T.); +#330737 = FACE_BOUND('',#330738,.T.); +#330738 = EDGE_LOOP('',(#330739,#330740,#330748,#330756)); +#330739 = ORIENTED_EDGE('',*,*,#330717,.T.); +#330740 = ORIENTED_EDGE('',*,*,#330741,.T.); +#330741 = EDGE_CURVE('',#330709,#330742,#330744,.T.); +#330742 = VERTEX_POINT('',#330743); +#330743 = CARTESIAN_POINT('',(121.15,-89.075,1.55)); +#330744 = LINE('',#330745,#330746); +#330745 = CARTESIAN_POINT('',(121.15,-88.225,1.55)); +#330746 = VECTOR('',#330747,1.); +#330747 = DIRECTION('',(0.,-1.,0.)); +#330748 = ORIENTED_EDGE('',*,*,#330749,.F.); +#330749 = EDGE_CURVE('',#330750,#330742,#330752,.T.); +#330750 = VERTEX_POINT('',#330751); +#330751 = CARTESIAN_POINT('',(121.15,-89.075,1.51)); +#330752 = LINE('',#330753,#330754); +#330753 = CARTESIAN_POINT('',(121.15,-89.075,1.51)); +#330754 = VECTOR('',#330755,1.); +#330755 = DIRECTION('',(0.,0.,1.)); +#330756 = ORIENTED_EDGE('',*,*,#330757,.F.); +#330757 = EDGE_CURVE('',#330718,#330750,#330758,.T.); +#330758 = LINE('',#330759,#330760); +#330759 = CARTESIAN_POINT('',(121.15,-88.225,1.51)); +#330760 = VECTOR('',#330761,1.); +#330761 = DIRECTION('',(0.,-1.,0.)); +#330762 = PLANE('',#330763); +#330763 = AXIS2_PLACEMENT_3D('',#330764,#330765,#330766); +#330764 = CARTESIAN_POINT('',(121.15,-88.225,1.51)); +#330765 = DIRECTION('',(1.,0.,-0.)); +#330766 = DIRECTION('',(0.,-1.,0.)); +#330767 = ADVANCED_FACE('',(#330768),#330795,.T.); +#330768 = FACE_BOUND('',#330769,.T.); +#330769 = EDGE_LOOP('',(#330770,#330771,#330780,#330788)); +#330770 = ORIENTED_EDGE('',*,*,#330749,.T.); +#330771 = ORIENTED_EDGE('',*,*,#330772,.T.); +#330772 = EDGE_CURVE('',#330742,#330773,#330775,.T.); +#330773 = VERTEX_POINT('',#330774); +#330774 = CARTESIAN_POINT('',(120.925,-89.3,1.55)); +#330775 = CIRCLE('',#330776,0.225000087974); +#330776 = AXIS2_PLACEMENT_3D('',#330777,#330778,#330779); +#330777 = CARTESIAN_POINT('',(120.92499991202,-89.07499991202,1.55)); +#330778 = DIRECTION('',(0.,0.,-1.)); +#330779 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#330780 = ORIENTED_EDGE('',*,*,#330781,.F.); +#330781 = EDGE_CURVE('',#330782,#330773,#330784,.T.); +#330782 = VERTEX_POINT('',#330783); +#330783 = CARTESIAN_POINT('',(120.925,-89.3,1.51)); +#330784 = LINE('',#330785,#330786); +#330785 = CARTESIAN_POINT('',(120.925,-89.3,1.51)); +#330786 = VECTOR('',#330787,1.); +#330787 = DIRECTION('',(0.,0.,1.)); +#330788 = ORIENTED_EDGE('',*,*,#330789,.F.); +#330789 = EDGE_CURVE('',#330750,#330782,#330790,.T.); +#330790 = CIRCLE('',#330791,0.225000087974); +#330791 = AXIS2_PLACEMENT_3D('',#330792,#330793,#330794); +#330792 = CARTESIAN_POINT('',(120.92499991202,-89.07499991202,1.51)); +#330793 = DIRECTION('',(0.,0.,-1.)); +#330794 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#330795 = CYLINDRICAL_SURFACE('',#330796,0.225000087974); +#330796 = AXIS2_PLACEMENT_3D('',#330797,#330798,#330799); +#330797 = CARTESIAN_POINT('',(120.92499991202,-89.07499991202,1.51)); +#330798 = DIRECTION('',(0.,0.,-1.)); +#330799 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#330800 = ADVANCED_FACE('',(#330801),#330826,.T.); +#330801 = FACE_BOUND('',#330802,.T.); +#330802 = EDGE_LOOP('',(#330803,#330804,#330812,#330820)); +#330803 = ORIENTED_EDGE('',*,*,#330781,.T.); +#330804 = ORIENTED_EDGE('',*,*,#330805,.T.); +#330805 = EDGE_CURVE('',#330773,#330806,#330808,.T.); +#330806 = VERTEX_POINT('',#330807); +#330807 = CARTESIAN_POINT('',(120.475,-89.3,1.55)); +#330808 = LINE('',#330809,#330810); +#330809 = CARTESIAN_POINT('',(120.925,-89.3,1.55)); +#330810 = VECTOR('',#330811,1.); +#330811 = DIRECTION('',(-1.,0.,0.)); +#330812 = ORIENTED_EDGE('',*,*,#330813,.F.); +#330813 = EDGE_CURVE('',#330814,#330806,#330816,.T.); +#330814 = VERTEX_POINT('',#330815); +#330815 = CARTESIAN_POINT('',(120.475,-89.3,1.51)); +#330816 = LINE('',#330817,#330818); +#330817 = CARTESIAN_POINT('',(120.475,-89.3,1.51)); +#330818 = VECTOR('',#330819,1.); +#330819 = DIRECTION('',(0.,0.,1.)); +#330820 = ORIENTED_EDGE('',*,*,#330821,.F.); +#330821 = EDGE_CURVE('',#330782,#330814,#330822,.T.); +#330822 = LINE('',#330823,#330824); +#330823 = CARTESIAN_POINT('',(120.925,-89.3,1.51)); +#330824 = VECTOR('',#330825,1.); +#330825 = DIRECTION('',(-1.,0.,0.)); +#330826 = PLANE('',#330827); +#330827 = AXIS2_PLACEMENT_3D('',#330828,#330829,#330830); +#330828 = CARTESIAN_POINT('',(120.925,-89.3,1.51)); +#330829 = DIRECTION('',(0.,-1.,0.)); +#330830 = DIRECTION('',(-1.,0.,0.)); +#330831 = ADVANCED_FACE('',(#330832),#330859,.T.); +#330832 = FACE_BOUND('',#330833,.T.); +#330833 = EDGE_LOOP('',(#330834,#330835,#330844,#330852)); +#330834 = ORIENTED_EDGE('',*,*,#330813,.T.); +#330835 = ORIENTED_EDGE('',*,*,#330836,.T.); +#330836 = EDGE_CURVE('',#330806,#330837,#330839,.T.); +#330837 = VERTEX_POINT('',#330838); +#330838 = CARTESIAN_POINT('',(120.25,-89.075,1.55)); +#330839 = CIRCLE('',#330840,0.225000087974); +#330840 = AXIS2_PLACEMENT_3D('',#330841,#330842,#330843); +#330841 = CARTESIAN_POINT('',(120.47500008797,-89.07499991202,1.55)); +#330842 = DIRECTION('',(0.,0.,-1.)); +#330843 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330844 = ORIENTED_EDGE('',*,*,#330845,.F.); +#330845 = EDGE_CURVE('',#330846,#330837,#330848,.T.); +#330846 = VERTEX_POINT('',#330847); +#330847 = CARTESIAN_POINT('',(120.25,-89.075,1.51)); +#330848 = LINE('',#330849,#330850); +#330849 = CARTESIAN_POINT('',(120.25,-89.075,1.51)); +#330850 = VECTOR('',#330851,1.); +#330851 = DIRECTION('',(0.,0.,1.)); +#330852 = ORIENTED_EDGE('',*,*,#330853,.F.); +#330853 = EDGE_CURVE('',#330814,#330846,#330854,.T.); +#330854 = CIRCLE('',#330855,0.225000087974); +#330855 = AXIS2_PLACEMENT_3D('',#330856,#330857,#330858); +#330856 = CARTESIAN_POINT('',(120.47500008797,-89.07499991202,1.51)); +#330857 = DIRECTION('',(0.,0.,-1.)); +#330858 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330859 = CYLINDRICAL_SURFACE('',#330860,0.225000087974); +#330860 = AXIS2_PLACEMENT_3D('',#330861,#330862,#330863); +#330861 = CARTESIAN_POINT('',(120.47500008797,-89.07499991202,1.51)); +#330862 = DIRECTION('',(0.,0.,-1.)); +#330863 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#330864 = ADVANCED_FACE('',(#330865),#330881,.T.); +#330865 = FACE_BOUND('',#330866,.T.); +#330866 = EDGE_LOOP('',(#330867,#330868,#330874,#330875)); +#330867 = ORIENTED_EDGE('',*,*,#330845,.T.); +#330868 = ORIENTED_EDGE('',*,*,#330869,.T.); +#330869 = EDGE_CURVE('',#330837,#330637,#330870,.T.); +#330870 = LINE('',#330871,#330872); +#330871 = CARTESIAN_POINT('',(120.25,-89.075,1.55)); +#330872 = VECTOR('',#330873,1.); +#330873 = DIRECTION('',(0.,1.,0.)); +#330874 = ORIENTED_EDGE('',*,*,#330634,.F.); +#330875 = ORIENTED_EDGE('',*,*,#330876,.F.); +#330876 = EDGE_CURVE('',#330846,#330635,#330877,.T.); +#330877 = LINE('',#330878,#330879); +#330878 = CARTESIAN_POINT('',(120.25,-89.075,1.51)); +#330879 = VECTOR('',#330880,1.); +#330880 = DIRECTION('',(0.,1.,0.)); +#330881 = PLANE('',#330882); +#330882 = AXIS2_PLACEMENT_3D('',#330883,#330884,#330885); +#330883 = CARTESIAN_POINT('',(120.25,-89.075,1.51)); +#330884 = DIRECTION('',(-1.,0.,0.)); +#330885 = DIRECTION('',(0.,1.,0.)); +#330886 = ADVANCED_FACE('',(#330887),#330897,.F.); +#330887 = FACE_BOUND('',#330888,.T.); +#330888 = EDGE_LOOP('',(#330889,#330890,#330891,#330892,#330893,#330894, + #330895,#330896)); +#330889 = ORIENTED_EDGE('',*,*,#330661,.T.); +#330890 = ORIENTED_EDGE('',*,*,#330693,.T.); +#330891 = ORIENTED_EDGE('',*,*,#330725,.T.); +#330892 = ORIENTED_EDGE('',*,*,#330757,.T.); +#330893 = ORIENTED_EDGE('',*,*,#330789,.T.); +#330894 = ORIENTED_EDGE('',*,*,#330821,.T.); +#330895 = ORIENTED_EDGE('',*,*,#330853,.T.); +#330896 = ORIENTED_EDGE('',*,*,#330876,.T.); +#330897 = PLANE('',#330898); +#330898 = AXIS2_PLACEMENT_3D('',#330899,#330900,#330901); +#330899 = CARTESIAN_POINT('',(0.,0.,1.51)); +#330900 = DIRECTION('',(0.,0.,1.)); +#330901 = DIRECTION('',(1.,0.,-0.)); +#330902 = ADVANCED_FACE('',(#330903),#330913,.T.); +#330903 = FACE_BOUND('',#330904,.F.); +#330904 = EDGE_LOOP('',(#330905,#330906,#330907,#330908,#330909,#330910, + #330911,#330912)); +#330905 = ORIENTED_EDGE('',*,*,#330644,.T.); +#330906 = ORIENTED_EDGE('',*,*,#330677,.T.); +#330907 = ORIENTED_EDGE('',*,*,#330708,.T.); +#330908 = ORIENTED_EDGE('',*,*,#330741,.T.); +#330909 = ORIENTED_EDGE('',*,*,#330772,.T.); +#330910 = ORIENTED_EDGE('',*,*,#330805,.T.); +#330911 = ORIENTED_EDGE('',*,*,#330836,.T.); +#330912 = ORIENTED_EDGE('',*,*,#330869,.T.); +#330913 = PLANE('',#330914); +#330914 = AXIS2_PLACEMENT_3D('',#330915,#330916,#330917); +#330915 = CARTESIAN_POINT('',(0.,0.,1.55)); +#330916 = DIRECTION('',(0.,0.,1.)); +#330917 = DIRECTION('',(1.,0.,-0.)); +#330918 = MANIFOLD_SOLID_BREP('',#330919); +#330919 = CLOSED_SHELL('',(#330920,#330962,#330993,#331026,#331057, + #331090,#331121,#331154,#331176,#331192)); +#330920 = ADVANCED_FACE('',(#330921),#330957,.T.); +#330921 = FACE_BOUND('',#330922,.T.); +#330922 = EDGE_LOOP('',(#330923,#330933,#330942,#330950)); +#330923 = ORIENTED_EDGE('',*,*,#330924,.T.); +#330924 = EDGE_CURVE('',#330925,#330927,#330929,.T.); +#330925 = VERTEX_POINT('',#330926); +#330926 = CARTESIAN_POINT('',(120.25,-91.925,1.51)); +#330927 = VERTEX_POINT('',#330928); +#330928 = CARTESIAN_POINT('',(120.25,-91.925,1.55)); +#330929 = LINE('',#330930,#330931); +#330930 = CARTESIAN_POINT('',(120.25,-91.925,1.51)); +#330931 = VECTOR('',#330932,1.); +#330932 = DIRECTION('',(0.,0.,1.)); +#330933 = ORIENTED_EDGE('',*,*,#330934,.T.); +#330934 = EDGE_CURVE('',#330927,#330935,#330937,.T.); +#330935 = VERTEX_POINT('',#330936); +#330936 = CARTESIAN_POINT('',(120.475,-91.7,1.55)); +#330937 = CIRCLE('',#330938,0.225000087974); +#330938 = AXIS2_PLACEMENT_3D('',#330939,#330940,#330941); +#330939 = CARTESIAN_POINT('',(120.47500008797,-91.92500008797,1.55)); +#330940 = DIRECTION('',(0.,0.,-1.)); +#330941 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330942 = ORIENTED_EDGE('',*,*,#330943,.F.); +#330943 = EDGE_CURVE('',#330944,#330935,#330946,.T.); +#330944 = VERTEX_POINT('',#330945); +#330945 = CARTESIAN_POINT('',(120.475,-91.7,1.51)); +#330946 = LINE('',#330947,#330948); +#330947 = CARTESIAN_POINT('',(120.475,-91.7,1.51)); +#330948 = VECTOR('',#330949,1.); +#330949 = DIRECTION('',(0.,0.,1.)); +#330950 = ORIENTED_EDGE('',*,*,#330951,.F.); +#330951 = EDGE_CURVE('',#330925,#330944,#330952,.T.); +#330952 = CIRCLE('',#330953,0.225000087974); +#330953 = AXIS2_PLACEMENT_3D('',#330954,#330955,#330956); +#330954 = CARTESIAN_POINT('',(120.47500008797,-91.92500008797,1.51)); +#330955 = DIRECTION('',(0.,0.,-1.)); +#330956 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330957 = CYLINDRICAL_SURFACE('',#330958,0.225000087974); +#330958 = AXIS2_PLACEMENT_3D('',#330959,#330960,#330961); +#330959 = CARTESIAN_POINT('',(120.47500008797,-91.92500008797,1.51)); +#330960 = DIRECTION('',(0.,0.,-1.)); +#330961 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#330962 = ADVANCED_FACE('',(#330963),#330988,.T.); +#330963 = FACE_BOUND('',#330964,.T.); +#330964 = EDGE_LOOP('',(#330965,#330966,#330974,#330982)); +#330965 = ORIENTED_EDGE('',*,*,#330943,.T.); +#330966 = ORIENTED_EDGE('',*,*,#330967,.T.); +#330967 = EDGE_CURVE('',#330935,#330968,#330970,.T.); +#330968 = VERTEX_POINT('',#330969); +#330969 = CARTESIAN_POINT('',(120.925,-91.7,1.55)); +#330970 = LINE('',#330971,#330972); +#330971 = CARTESIAN_POINT('',(120.475,-91.7,1.55)); +#330972 = VECTOR('',#330973,1.); +#330973 = DIRECTION('',(1.,0.,0.)); +#330974 = ORIENTED_EDGE('',*,*,#330975,.F.); +#330975 = EDGE_CURVE('',#330976,#330968,#330978,.T.); +#330976 = VERTEX_POINT('',#330977); +#330977 = CARTESIAN_POINT('',(120.925,-91.7,1.51)); +#330978 = LINE('',#330979,#330980); +#330979 = CARTESIAN_POINT('',(120.925,-91.7,1.51)); +#330980 = VECTOR('',#330981,1.); +#330981 = DIRECTION('',(0.,0.,1.)); +#330982 = ORIENTED_EDGE('',*,*,#330983,.F.); +#330983 = EDGE_CURVE('',#330944,#330976,#330984,.T.); +#330984 = LINE('',#330985,#330986); +#330985 = CARTESIAN_POINT('',(120.475,-91.7,1.51)); +#330986 = VECTOR('',#330987,1.); +#330987 = DIRECTION('',(1.,0.,0.)); +#330988 = PLANE('',#330989); +#330989 = AXIS2_PLACEMENT_3D('',#330990,#330991,#330992); +#330990 = CARTESIAN_POINT('',(120.475,-91.7,1.51)); +#330991 = DIRECTION('',(0.,1.,0.)); +#330992 = DIRECTION('',(1.,0.,0.)); +#330993 = ADVANCED_FACE('',(#330994),#331021,.T.); +#330994 = FACE_BOUND('',#330995,.T.); +#330995 = EDGE_LOOP('',(#330996,#330997,#331006,#331014)); +#330996 = ORIENTED_EDGE('',*,*,#330975,.T.); +#330997 = ORIENTED_EDGE('',*,*,#330998,.T.); +#330998 = EDGE_CURVE('',#330968,#330999,#331001,.T.); +#330999 = VERTEX_POINT('',#331000); +#331000 = CARTESIAN_POINT('',(121.15,-91.925,1.55)); +#331001 = CIRCLE('',#331002,0.225000087974); +#331002 = AXIS2_PLACEMENT_3D('',#331003,#331004,#331005); +#331003 = CARTESIAN_POINT('',(120.92499991202,-91.92500008797,1.55)); +#331004 = DIRECTION('',(0.,0.,-1.)); +#331005 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#331006 = ORIENTED_EDGE('',*,*,#331007,.F.); +#331007 = EDGE_CURVE('',#331008,#330999,#331010,.T.); +#331008 = VERTEX_POINT('',#331009); +#331009 = CARTESIAN_POINT('',(121.15,-91.925,1.51)); +#331010 = LINE('',#331011,#331012); +#331011 = CARTESIAN_POINT('',(121.15,-91.925,1.51)); +#331012 = VECTOR('',#331013,1.); +#331013 = DIRECTION('',(0.,0.,1.)); +#331014 = ORIENTED_EDGE('',*,*,#331015,.F.); +#331015 = EDGE_CURVE('',#330976,#331008,#331016,.T.); +#331016 = CIRCLE('',#331017,0.225000087974); +#331017 = AXIS2_PLACEMENT_3D('',#331018,#331019,#331020); +#331018 = CARTESIAN_POINT('',(120.92499991202,-91.92500008797,1.51)); +#331019 = DIRECTION('',(0.,0.,-1.)); +#331020 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#331021 = CYLINDRICAL_SURFACE('',#331022,0.225000087974); +#331022 = AXIS2_PLACEMENT_3D('',#331023,#331024,#331025); +#331023 = CARTESIAN_POINT('',(120.92499991202,-91.92500008797,1.51)); +#331024 = DIRECTION('',(0.,0.,-1.)); +#331025 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#331026 = ADVANCED_FACE('',(#331027),#331052,.T.); +#331027 = FACE_BOUND('',#331028,.T.); +#331028 = EDGE_LOOP('',(#331029,#331030,#331038,#331046)); +#331029 = ORIENTED_EDGE('',*,*,#331007,.T.); +#331030 = ORIENTED_EDGE('',*,*,#331031,.T.); +#331031 = EDGE_CURVE('',#330999,#331032,#331034,.T.); +#331032 = VERTEX_POINT('',#331033); +#331033 = CARTESIAN_POINT('',(121.15,-92.775,1.55)); +#331034 = LINE('',#331035,#331036); +#331035 = CARTESIAN_POINT('',(121.15,-91.925,1.55)); +#331036 = VECTOR('',#331037,1.); +#331037 = DIRECTION('',(0.,-1.,0.)); +#331038 = ORIENTED_EDGE('',*,*,#331039,.F.); +#331039 = EDGE_CURVE('',#331040,#331032,#331042,.T.); +#331040 = VERTEX_POINT('',#331041); +#331041 = CARTESIAN_POINT('',(121.15,-92.775,1.51)); +#331042 = LINE('',#331043,#331044); +#331043 = CARTESIAN_POINT('',(121.15,-92.775,1.51)); +#331044 = VECTOR('',#331045,1.); +#331045 = DIRECTION('',(0.,0.,1.)); +#331046 = ORIENTED_EDGE('',*,*,#331047,.F.); +#331047 = EDGE_CURVE('',#331008,#331040,#331048,.T.); +#331048 = LINE('',#331049,#331050); +#331049 = CARTESIAN_POINT('',(121.15,-91.925,1.51)); +#331050 = VECTOR('',#331051,1.); +#331051 = DIRECTION('',(0.,-1.,0.)); +#331052 = PLANE('',#331053); +#331053 = AXIS2_PLACEMENT_3D('',#331054,#331055,#331056); +#331054 = CARTESIAN_POINT('',(121.15,-91.925,1.51)); +#331055 = DIRECTION('',(1.,0.,-0.)); +#331056 = DIRECTION('',(0.,-1.,0.)); +#331057 = ADVANCED_FACE('',(#331058),#331085,.T.); +#331058 = FACE_BOUND('',#331059,.T.); +#331059 = EDGE_LOOP('',(#331060,#331061,#331070,#331078)); +#331060 = ORIENTED_EDGE('',*,*,#331039,.T.); +#331061 = ORIENTED_EDGE('',*,*,#331062,.T.); +#331062 = EDGE_CURVE('',#331032,#331063,#331065,.T.); +#331063 = VERTEX_POINT('',#331064); +#331064 = CARTESIAN_POINT('',(120.925,-93.,1.55)); +#331065 = CIRCLE('',#331066,0.225000087974); +#331066 = AXIS2_PLACEMENT_3D('',#331067,#331068,#331069); +#331067 = CARTESIAN_POINT('',(120.92499991202,-92.77499991202,1.55)); +#331068 = DIRECTION('',(0.,0.,-1.)); +#331069 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#331070 = ORIENTED_EDGE('',*,*,#331071,.F.); +#331071 = EDGE_CURVE('',#331072,#331063,#331074,.T.); +#331072 = VERTEX_POINT('',#331073); +#331073 = CARTESIAN_POINT('',(120.925,-93.,1.51)); +#331074 = LINE('',#331075,#331076); +#331075 = CARTESIAN_POINT('',(120.925,-93.,1.51)); +#331076 = VECTOR('',#331077,1.); +#331077 = DIRECTION('',(0.,0.,1.)); +#331078 = ORIENTED_EDGE('',*,*,#331079,.F.); +#331079 = EDGE_CURVE('',#331040,#331072,#331080,.T.); +#331080 = CIRCLE('',#331081,0.225000087974); +#331081 = AXIS2_PLACEMENT_3D('',#331082,#331083,#331084); +#331082 = CARTESIAN_POINT('',(120.92499991202,-92.77499991202,1.51)); +#331083 = DIRECTION('',(0.,0.,-1.)); +#331084 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#331085 = CYLINDRICAL_SURFACE('',#331086,0.225000087974); +#331086 = AXIS2_PLACEMENT_3D('',#331087,#331088,#331089); +#331087 = CARTESIAN_POINT('',(120.92499991202,-92.77499991202,1.51)); +#331088 = DIRECTION('',(0.,0.,-1.)); +#331089 = DIRECTION('',(1.,-3.909954721353E-07,0.)); +#331090 = ADVANCED_FACE('',(#331091),#331116,.T.); +#331091 = FACE_BOUND('',#331092,.T.); +#331092 = EDGE_LOOP('',(#331093,#331094,#331102,#331110)); +#331093 = ORIENTED_EDGE('',*,*,#331071,.T.); +#331094 = ORIENTED_EDGE('',*,*,#331095,.T.); +#331095 = EDGE_CURVE('',#331063,#331096,#331098,.T.); +#331096 = VERTEX_POINT('',#331097); +#331097 = CARTESIAN_POINT('',(120.475,-93.,1.55)); +#331098 = LINE('',#331099,#331100); +#331099 = CARTESIAN_POINT('',(120.925,-93.,1.55)); +#331100 = VECTOR('',#331101,1.); +#331101 = DIRECTION('',(-1.,0.,0.)); +#331102 = ORIENTED_EDGE('',*,*,#331103,.F.); +#331103 = EDGE_CURVE('',#331104,#331096,#331106,.T.); +#331104 = VERTEX_POINT('',#331105); +#331105 = CARTESIAN_POINT('',(120.475,-93.,1.51)); +#331106 = LINE('',#331107,#331108); +#331107 = CARTESIAN_POINT('',(120.475,-93.,1.51)); +#331108 = VECTOR('',#331109,1.); +#331109 = DIRECTION('',(0.,0.,1.)); +#331110 = ORIENTED_EDGE('',*,*,#331111,.F.); +#331111 = EDGE_CURVE('',#331072,#331104,#331112,.T.); +#331112 = LINE('',#331113,#331114); +#331113 = CARTESIAN_POINT('',(120.925,-93.,1.51)); +#331114 = VECTOR('',#331115,1.); +#331115 = DIRECTION('',(-1.,0.,0.)); +#331116 = PLANE('',#331117); +#331117 = AXIS2_PLACEMENT_3D('',#331118,#331119,#331120); +#331118 = CARTESIAN_POINT('',(120.925,-93.,1.51)); +#331119 = DIRECTION('',(0.,-1.,0.)); +#331120 = DIRECTION('',(-1.,0.,0.)); +#331121 = ADVANCED_FACE('',(#331122),#331149,.T.); +#331122 = FACE_BOUND('',#331123,.T.); +#331123 = EDGE_LOOP('',(#331124,#331125,#331134,#331142)); +#331124 = ORIENTED_EDGE('',*,*,#331103,.T.); +#331125 = ORIENTED_EDGE('',*,*,#331126,.T.); +#331126 = EDGE_CURVE('',#331096,#331127,#331129,.T.); +#331127 = VERTEX_POINT('',#331128); +#331128 = CARTESIAN_POINT('',(120.25,-92.775,1.55)); +#331129 = CIRCLE('',#331130,0.225000087974); +#331130 = AXIS2_PLACEMENT_3D('',#331131,#331132,#331133); +#331131 = CARTESIAN_POINT('',(120.47500008797,-92.77499991202,1.55)); +#331132 = DIRECTION('',(0.,0.,-1.)); +#331133 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#331134 = ORIENTED_EDGE('',*,*,#331135,.F.); +#331135 = EDGE_CURVE('',#331136,#331127,#331138,.T.); +#331136 = VERTEX_POINT('',#331137); +#331137 = CARTESIAN_POINT('',(120.25,-92.775,1.51)); +#331138 = LINE('',#331139,#331140); +#331139 = CARTESIAN_POINT('',(120.25,-92.775,1.51)); +#331140 = VECTOR('',#331141,1.); +#331141 = DIRECTION('',(0.,0.,1.)); +#331142 = ORIENTED_EDGE('',*,*,#331143,.F.); +#331143 = EDGE_CURVE('',#331104,#331136,#331144,.T.); +#331144 = CIRCLE('',#331145,0.225000087974); +#331145 = AXIS2_PLACEMENT_3D('',#331146,#331147,#331148); +#331146 = CARTESIAN_POINT('',(120.47500008797,-92.77499991202,1.51)); +#331147 = DIRECTION('',(0.,0.,-1.)); +#331148 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#331149 = CYLINDRICAL_SURFACE('',#331150,0.225000087974); +#331150 = AXIS2_PLACEMENT_3D('',#331151,#331152,#331153); +#331151 = CARTESIAN_POINT('',(120.47500008797,-92.77499991202,1.51)); +#331152 = DIRECTION('',(0.,0.,-1.)); +#331153 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#331154 = ADVANCED_FACE('',(#331155),#331171,.T.); +#331155 = FACE_BOUND('',#331156,.T.); +#331156 = EDGE_LOOP('',(#331157,#331158,#331164,#331165)); +#331157 = ORIENTED_EDGE('',*,*,#331135,.T.); +#331158 = ORIENTED_EDGE('',*,*,#331159,.T.); +#331159 = EDGE_CURVE('',#331127,#330927,#331160,.T.); +#331160 = LINE('',#331161,#331162); +#331161 = CARTESIAN_POINT('',(120.25,-92.775,1.55)); +#331162 = VECTOR('',#331163,1.); +#331163 = DIRECTION('',(0.,1.,0.)); +#331164 = ORIENTED_EDGE('',*,*,#330924,.F.); +#331165 = ORIENTED_EDGE('',*,*,#331166,.F.); +#331166 = EDGE_CURVE('',#331136,#330925,#331167,.T.); +#331167 = LINE('',#331168,#331169); +#331168 = CARTESIAN_POINT('',(120.25,-92.775,1.51)); +#331169 = VECTOR('',#331170,1.); +#331170 = DIRECTION('',(0.,1.,0.)); +#331171 = PLANE('',#331172); +#331172 = AXIS2_PLACEMENT_3D('',#331173,#331174,#331175); +#331173 = CARTESIAN_POINT('',(120.25,-92.775,1.51)); +#331174 = DIRECTION('',(-1.,0.,0.)); +#331175 = DIRECTION('',(0.,1.,0.)); +#331176 = ADVANCED_FACE('',(#331177),#331187,.F.); +#331177 = FACE_BOUND('',#331178,.T.); +#331178 = EDGE_LOOP('',(#331179,#331180,#331181,#331182,#331183,#331184, + #331185,#331186)); +#331179 = ORIENTED_EDGE('',*,*,#330951,.T.); +#331180 = ORIENTED_EDGE('',*,*,#330983,.T.); +#331181 = ORIENTED_EDGE('',*,*,#331015,.T.); +#331182 = ORIENTED_EDGE('',*,*,#331047,.T.); +#331183 = ORIENTED_EDGE('',*,*,#331079,.T.); +#331184 = ORIENTED_EDGE('',*,*,#331111,.T.); +#331185 = ORIENTED_EDGE('',*,*,#331143,.T.); +#331186 = ORIENTED_EDGE('',*,*,#331166,.T.); +#331187 = PLANE('',#331188); +#331188 = AXIS2_PLACEMENT_3D('',#331189,#331190,#331191); +#331189 = CARTESIAN_POINT('',(0.,0.,1.51)); +#331190 = DIRECTION('',(0.,0.,1.)); +#331191 = DIRECTION('',(1.,0.,-0.)); +#331192 = ADVANCED_FACE('',(#331193),#331203,.T.); +#331193 = FACE_BOUND('',#331194,.F.); +#331194 = EDGE_LOOP('',(#331195,#331196,#331197,#331198,#331199,#331200, + #331201,#331202)); +#331195 = ORIENTED_EDGE('',*,*,#330934,.T.); +#331196 = ORIENTED_EDGE('',*,*,#330967,.T.); +#331197 = ORIENTED_EDGE('',*,*,#330998,.T.); +#331198 = ORIENTED_EDGE('',*,*,#331031,.T.); +#331199 = ORIENTED_EDGE('',*,*,#331062,.T.); +#331200 = ORIENTED_EDGE('',*,*,#331095,.T.); +#331201 = ORIENTED_EDGE('',*,*,#331126,.T.); +#331202 = ORIENTED_EDGE('',*,*,#331159,.T.); +#331203 = PLANE('',#331204); +#331204 = AXIS2_PLACEMENT_3D('',#331205,#331206,#331207); +#331205 = CARTESIAN_POINT('',(0.,0.,1.55)); +#331206 = DIRECTION('',(0.,0.,1.)); +#331207 = DIRECTION('',(1.,0.,-0.)); +#331208 = MANIFOLD_SOLID_BREP('',#331209); +#331209 = CLOSED_SHELL('',(#331210,#331252,#331283,#331316,#331347, + #331380,#331411,#331444,#331466,#331482)); +#331210 = ADVANCED_FACE('',(#331211),#331247,.T.); +#331211 = FACE_BOUND('',#331212,.T.); +#331212 = EDGE_LOOP('',(#331213,#331223,#331232,#331240)); +#331213 = ORIENTED_EDGE('',*,*,#331214,.T.); +#331214 = EDGE_CURVE('',#331215,#331217,#331219,.T.); +#331215 = VERTEX_POINT('',#331216); +#331216 = CARTESIAN_POINT('',(143.45,-157.2,1.51)); +#331217 = VERTEX_POINT('',#331218); +#331218 = CARTESIAN_POINT('',(143.45,-157.2,1.55)); +#331219 = LINE('',#331220,#331221); +#331220 = CARTESIAN_POINT('',(143.45,-157.2,1.51)); +#331221 = VECTOR('',#331222,1.); +#331222 = DIRECTION('',(0.,0.,1.)); +#331223 = ORIENTED_EDGE('',*,*,#331224,.T.); +#331224 = EDGE_CURVE('',#331217,#331225,#331227,.T.); +#331225 = VERTEX_POINT('',#331226); +#331226 = CARTESIAN_POINT('',(143.6,-157.05,1.55)); +#331227 = CIRCLE('',#331228,0.150000058649); +#331228 = AXIS2_PLACEMENT_3D('',#331229,#331230,#331231); +#331229 = CARTESIAN_POINT('',(143.60000005864,-157.2000000586,1.55)); +#331230 = DIRECTION('',(0.,0.,-1.)); +#331231 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#331232 = ORIENTED_EDGE('',*,*,#331233,.F.); +#331233 = EDGE_CURVE('',#331234,#331225,#331236,.T.); +#331234 = VERTEX_POINT('',#331235); +#331235 = CARTESIAN_POINT('',(143.6,-157.05,1.51)); +#331236 = LINE('',#331237,#331238); +#331237 = CARTESIAN_POINT('',(143.6,-157.05,1.51)); +#331238 = VECTOR('',#331239,1.); +#331239 = DIRECTION('',(0.,0.,1.)); +#331240 = ORIENTED_EDGE('',*,*,#331241,.F.); +#331241 = EDGE_CURVE('',#331215,#331234,#331242,.T.); +#331242 = CIRCLE('',#331243,0.150000058649); +#331243 = AXIS2_PLACEMENT_3D('',#331244,#331245,#331246); +#331244 = CARTESIAN_POINT('',(143.60000005864,-157.2000000586,1.51)); +#331245 = DIRECTION('',(0.,0.,-1.)); +#331246 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#331247 = CYLINDRICAL_SURFACE('',#331248,0.150000058649); +#331248 = AXIS2_PLACEMENT_3D('',#331249,#331250,#331251); +#331249 = CARTESIAN_POINT('',(143.60000005864,-157.2000000586,1.51)); +#331250 = DIRECTION('',(0.,0.,-1.)); +#331251 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#331252 = ADVANCED_FACE('',(#331253),#331278,.T.); +#331253 = FACE_BOUND('',#331254,.T.); +#331254 = EDGE_LOOP('',(#331255,#331256,#331264,#331272)); +#331255 = ORIENTED_EDGE('',*,*,#331233,.T.); +#331256 = ORIENTED_EDGE('',*,*,#331257,.T.); +#331257 = EDGE_CURVE('',#331225,#331258,#331260,.T.); +#331258 = VERTEX_POINT('',#331259); +#331259 = CARTESIAN_POINT('',(144.8,-157.05,1.55)); +#331260 = LINE('',#331261,#331262); +#331261 = CARTESIAN_POINT('',(143.6,-157.05,1.55)); +#331262 = VECTOR('',#331263,1.); +#331263 = DIRECTION('',(1.,0.,0.)); +#331264 = ORIENTED_EDGE('',*,*,#331265,.F.); +#331265 = EDGE_CURVE('',#331266,#331258,#331268,.T.); +#331266 = VERTEX_POINT('',#331267); +#331267 = CARTESIAN_POINT('',(144.8,-157.05,1.51)); +#331268 = LINE('',#331269,#331270); +#331269 = CARTESIAN_POINT('',(144.8,-157.05,1.51)); +#331270 = VECTOR('',#331271,1.); +#331271 = DIRECTION('',(0.,0.,1.)); +#331272 = ORIENTED_EDGE('',*,*,#331273,.F.); +#331273 = EDGE_CURVE('',#331234,#331266,#331274,.T.); +#331274 = LINE('',#331275,#331276); +#331275 = CARTESIAN_POINT('',(143.6,-157.05,1.51)); +#331276 = VECTOR('',#331277,1.); +#331277 = DIRECTION('',(1.,0.,0.)); +#331278 = PLANE('',#331279); +#331279 = AXIS2_PLACEMENT_3D('',#331280,#331281,#331282); +#331280 = CARTESIAN_POINT('',(143.6,-157.05,1.51)); +#331281 = DIRECTION('',(0.,1.,0.)); +#331282 = DIRECTION('',(1.,0.,0.)); +#331283 = ADVANCED_FACE('',(#331284),#331311,.T.); +#331284 = FACE_BOUND('',#331285,.T.); +#331285 = EDGE_LOOP('',(#331286,#331287,#331296,#331304)); +#331286 = ORIENTED_EDGE('',*,*,#331265,.T.); +#331287 = ORIENTED_EDGE('',*,*,#331288,.T.); +#331288 = EDGE_CURVE('',#331258,#331289,#331291,.T.); +#331289 = VERTEX_POINT('',#331290); +#331290 = CARTESIAN_POINT('',(144.95,-157.2,1.55)); +#331291 = CIRCLE('',#331292,0.150000058649); +#331292 = AXIS2_PLACEMENT_3D('',#331293,#331294,#331295); +#331293 = CARTESIAN_POINT('',(144.79999994135,-157.2000000586,1.55)); +#331294 = DIRECTION('',(0.,0.,-1.)); +#331295 = DIRECTION('',(3.909950300202E-07,1.,0.)); +#331296 = ORIENTED_EDGE('',*,*,#331297,.F.); +#331297 = EDGE_CURVE('',#331298,#331289,#331300,.T.); +#331298 = VERTEX_POINT('',#331299); +#331299 = CARTESIAN_POINT('',(144.95,-157.2,1.51)); +#331300 = LINE('',#331301,#331302); +#331301 = CARTESIAN_POINT('',(144.95,-157.2,1.51)); +#331302 = VECTOR('',#331303,1.); +#331303 = DIRECTION('',(0.,0.,1.)); +#331304 = ORIENTED_EDGE('',*,*,#331305,.F.); +#331305 = EDGE_CURVE('',#331266,#331298,#331306,.T.); +#331306 = CIRCLE('',#331307,0.150000058649); +#331307 = AXIS2_PLACEMENT_3D('',#331308,#331309,#331310); +#331308 = CARTESIAN_POINT('',(144.79999994135,-157.2000000586,1.51)); +#331309 = DIRECTION('',(0.,0.,-1.)); +#331310 = DIRECTION('',(3.909950300202E-07,1.,0.)); +#331311 = CYLINDRICAL_SURFACE('',#331312,0.150000058649); +#331312 = AXIS2_PLACEMENT_3D('',#331313,#331314,#331315); +#331313 = CARTESIAN_POINT('',(144.79999994135,-157.2000000586,1.51)); +#331314 = DIRECTION('',(0.,0.,-1.)); +#331315 = DIRECTION('',(3.909950300202E-07,1.,0.)); +#331316 = ADVANCED_FACE('',(#331317),#331342,.T.); +#331317 = FACE_BOUND('',#331318,.T.); +#331318 = EDGE_LOOP('',(#331319,#331320,#331328,#331336)); +#331319 = ORIENTED_EDGE('',*,*,#331297,.T.); +#331320 = ORIENTED_EDGE('',*,*,#331321,.T.); +#331321 = EDGE_CURVE('',#331289,#331322,#331324,.T.); +#331322 = VERTEX_POINT('',#331323); +#331323 = CARTESIAN_POINT('',(144.95,-157.9,1.55)); +#331324 = LINE('',#331325,#331326); +#331325 = CARTESIAN_POINT('',(144.95,-157.2,1.55)); +#331326 = VECTOR('',#331327,1.); +#331327 = DIRECTION('',(0.,-1.,0.)); +#331328 = ORIENTED_EDGE('',*,*,#331329,.F.); +#331329 = EDGE_CURVE('',#331330,#331322,#331332,.T.); +#331330 = VERTEX_POINT('',#331331); +#331331 = CARTESIAN_POINT('',(144.95,-157.9,1.51)); +#331332 = LINE('',#331333,#331334); +#331333 = CARTESIAN_POINT('',(144.95,-157.9,1.51)); +#331334 = VECTOR('',#331335,1.); +#331335 = DIRECTION('',(0.,0.,1.)); +#331336 = ORIENTED_EDGE('',*,*,#331337,.F.); +#331337 = EDGE_CURVE('',#331298,#331330,#331338,.T.); +#331338 = LINE('',#331339,#331340); +#331339 = CARTESIAN_POINT('',(144.95,-157.2,1.51)); +#331340 = VECTOR('',#331341,1.); +#331341 = DIRECTION('',(0.,-1.,0.)); +#331342 = PLANE('',#331343); +#331343 = AXIS2_PLACEMENT_3D('',#331344,#331345,#331346); +#331344 = CARTESIAN_POINT('',(144.95,-157.2,1.51)); +#331345 = DIRECTION('',(1.,0.,-0.)); +#331346 = DIRECTION('',(0.,-1.,0.)); +#331347 = ADVANCED_FACE('',(#331348),#331375,.T.); +#331348 = FACE_BOUND('',#331349,.T.); +#331349 = EDGE_LOOP('',(#331350,#331351,#331360,#331368)); +#331350 = ORIENTED_EDGE('',*,*,#331329,.T.); +#331351 = ORIENTED_EDGE('',*,*,#331352,.T.); +#331352 = EDGE_CURVE('',#331322,#331353,#331355,.T.); +#331353 = VERTEX_POINT('',#331354); +#331354 = CARTESIAN_POINT('',(144.8,-158.05,1.55)); +#331355 = CIRCLE('',#331356,0.150000058649); +#331356 = AXIS2_PLACEMENT_3D('',#331357,#331358,#331359); +#331357 = CARTESIAN_POINT('',(144.79999994135,-157.8999999413,1.55)); +#331358 = DIRECTION('',(0.,0.,-1.)); +#331359 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#331360 = ORIENTED_EDGE('',*,*,#331361,.F.); +#331361 = EDGE_CURVE('',#331362,#331353,#331364,.T.); +#331362 = VERTEX_POINT('',#331363); +#331363 = CARTESIAN_POINT('',(144.8,-158.05,1.51)); +#331364 = LINE('',#331365,#331366); +#331365 = CARTESIAN_POINT('',(144.8,-158.05,1.51)); +#331366 = VECTOR('',#331367,1.); +#331367 = DIRECTION('',(0.,0.,1.)); +#331368 = ORIENTED_EDGE('',*,*,#331369,.F.); +#331369 = EDGE_CURVE('',#331330,#331362,#331370,.T.); +#331370 = CIRCLE('',#331371,0.150000058649); +#331371 = AXIS2_PLACEMENT_3D('',#331372,#331373,#331374); +#331372 = CARTESIAN_POINT('',(144.79999994135,-157.8999999413,1.51)); +#331373 = DIRECTION('',(0.,0.,-1.)); +#331374 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#331375 = CYLINDRICAL_SURFACE('',#331376,0.150000058649); +#331376 = AXIS2_PLACEMENT_3D('',#331377,#331378,#331379); +#331377 = CARTESIAN_POINT('',(144.79999994135,-157.8999999413,1.51)); +#331378 = DIRECTION('',(0.,0.,-1.)); +#331379 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#331380 = ADVANCED_FACE('',(#331381),#331406,.T.); +#331381 = FACE_BOUND('',#331382,.T.); +#331382 = EDGE_LOOP('',(#331383,#331384,#331392,#331400)); +#331383 = ORIENTED_EDGE('',*,*,#331361,.T.); +#331384 = ORIENTED_EDGE('',*,*,#331385,.T.); +#331385 = EDGE_CURVE('',#331353,#331386,#331388,.T.); +#331386 = VERTEX_POINT('',#331387); +#331387 = CARTESIAN_POINT('',(143.6,-158.05,1.55)); +#331388 = LINE('',#331389,#331390); +#331389 = CARTESIAN_POINT('',(144.8,-158.05,1.55)); +#331390 = VECTOR('',#331391,1.); +#331391 = DIRECTION('',(-1.,0.,0.)); +#331392 = ORIENTED_EDGE('',*,*,#331393,.F.); +#331393 = EDGE_CURVE('',#331394,#331386,#331396,.T.); +#331394 = VERTEX_POINT('',#331395); +#331395 = CARTESIAN_POINT('',(143.6,-158.05,1.51)); +#331396 = LINE('',#331397,#331398); +#331397 = CARTESIAN_POINT('',(143.6,-158.05,1.51)); +#331398 = VECTOR('',#331399,1.); +#331399 = DIRECTION('',(0.,0.,1.)); +#331400 = ORIENTED_EDGE('',*,*,#331401,.F.); +#331401 = EDGE_CURVE('',#331362,#331394,#331402,.T.); +#331402 = LINE('',#331403,#331404); +#331403 = CARTESIAN_POINT('',(144.8,-158.05,1.51)); +#331404 = VECTOR('',#331405,1.); +#331405 = DIRECTION('',(-1.,0.,0.)); +#331406 = PLANE('',#331407); +#331407 = AXIS2_PLACEMENT_3D('',#331408,#331409,#331410); +#331408 = CARTESIAN_POINT('',(144.8,-158.05,1.51)); +#331409 = DIRECTION('',(0.,-1.,0.)); +#331410 = DIRECTION('',(-1.,0.,0.)); +#331411 = ADVANCED_FACE('',(#331412),#331439,.T.); +#331412 = FACE_BOUND('',#331413,.T.); +#331413 = EDGE_LOOP('',(#331414,#331415,#331424,#331432)); +#331414 = ORIENTED_EDGE('',*,*,#331393,.T.); +#331415 = ORIENTED_EDGE('',*,*,#331416,.T.); +#331416 = EDGE_CURVE('',#331386,#331417,#331419,.T.); +#331417 = VERTEX_POINT('',#331418); +#331418 = CARTESIAN_POINT('',(143.45,-157.9,1.55)); +#331419 = CIRCLE('',#331420,0.150000058649); +#331420 = AXIS2_PLACEMENT_3D('',#331421,#331422,#331423); +#331421 = CARTESIAN_POINT('',(143.60000005864,-157.8999999413,1.55)); +#331422 = DIRECTION('',(0.,0.,-1.)); +#331423 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#331424 = ORIENTED_EDGE('',*,*,#331425,.F.); +#331425 = EDGE_CURVE('',#331426,#331417,#331428,.T.); +#331426 = VERTEX_POINT('',#331427); +#331427 = CARTESIAN_POINT('',(143.45,-157.9,1.51)); +#331428 = LINE('',#331429,#331430); +#331429 = CARTESIAN_POINT('',(143.45,-157.9,1.51)); +#331430 = VECTOR('',#331431,1.); +#331431 = DIRECTION('',(0.,0.,1.)); +#331432 = ORIENTED_EDGE('',*,*,#331433,.F.); +#331433 = EDGE_CURVE('',#331394,#331426,#331434,.T.); +#331434 = CIRCLE('',#331435,0.150000058649); +#331435 = AXIS2_PLACEMENT_3D('',#331436,#331437,#331438); +#331436 = CARTESIAN_POINT('',(143.60000005864,-157.8999999413,1.51)); +#331437 = DIRECTION('',(0.,0.,-1.)); +#331438 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#331439 = CYLINDRICAL_SURFACE('',#331440,0.150000058649); +#331440 = AXIS2_PLACEMENT_3D('',#331441,#331442,#331443); +#331441 = CARTESIAN_POINT('',(143.60000005864,-157.8999999413,1.51)); +#331442 = DIRECTION('',(0.,0.,-1.)); +#331443 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#331444 = ADVANCED_FACE('',(#331445),#331461,.T.); +#331445 = FACE_BOUND('',#331446,.T.); +#331446 = EDGE_LOOP('',(#331447,#331448,#331454,#331455)); +#331447 = ORIENTED_EDGE('',*,*,#331425,.T.); +#331448 = ORIENTED_EDGE('',*,*,#331449,.T.); +#331449 = EDGE_CURVE('',#331417,#331217,#331450,.T.); +#331450 = LINE('',#331451,#331452); +#331451 = CARTESIAN_POINT('',(143.45,-157.9,1.55)); +#331452 = VECTOR('',#331453,1.); +#331453 = DIRECTION('',(0.,1.,0.)); +#331454 = ORIENTED_EDGE('',*,*,#331214,.F.); +#331455 = ORIENTED_EDGE('',*,*,#331456,.F.); +#331456 = EDGE_CURVE('',#331426,#331215,#331457,.T.); +#331457 = LINE('',#331458,#331459); +#331458 = CARTESIAN_POINT('',(143.45,-157.9,1.51)); +#331459 = VECTOR('',#331460,1.); +#331460 = DIRECTION('',(0.,1.,0.)); +#331461 = PLANE('',#331462); +#331462 = AXIS2_PLACEMENT_3D('',#331463,#331464,#331465); +#331463 = CARTESIAN_POINT('',(143.45,-157.9,1.51)); +#331464 = DIRECTION('',(-1.,0.,0.)); +#331465 = DIRECTION('',(0.,1.,0.)); +#331466 = ADVANCED_FACE('',(#331467),#331477,.F.); +#331467 = FACE_BOUND('',#331468,.T.); +#331468 = EDGE_LOOP('',(#331469,#331470,#331471,#331472,#331473,#331474, + #331475,#331476)); +#331469 = ORIENTED_EDGE('',*,*,#331241,.T.); +#331470 = ORIENTED_EDGE('',*,*,#331273,.T.); +#331471 = ORIENTED_EDGE('',*,*,#331305,.T.); +#331472 = ORIENTED_EDGE('',*,*,#331337,.T.); +#331473 = ORIENTED_EDGE('',*,*,#331369,.T.); +#331474 = ORIENTED_EDGE('',*,*,#331401,.T.); +#331475 = ORIENTED_EDGE('',*,*,#331433,.T.); +#331476 = ORIENTED_EDGE('',*,*,#331456,.T.); +#331477 = PLANE('',#331478); +#331478 = AXIS2_PLACEMENT_3D('',#331479,#331480,#331481); +#331479 = CARTESIAN_POINT('',(0.,0.,1.51)); +#331480 = DIRECTION('',(0.,0.,1.)); +#331481 = DIRECTION('',(1.,0.,-0.)); +#331482 = ADVANCED_FACE('',(#331483),#331493,.T.); +#331483 = FACE_BOUND('',#331484,.F.); +#331484 = EDGE_LOOP('',(#331485,#331486,#331487,#331488,#331489,#331490, + #331491,#331492)); +#331485 = ORIENTED_EDGE('',*,*,#331224,.T.); +#331486 = ORIENTED_EDGE('',*,*,#331257,.T.); +#331487 = ORIENTED_EDGE('',*,*,#331288,.T.); +#331488 = ORIENTED_EDGE('',*,*,#331321,.T.); +#331489 = ORIENTED_EDGE('',*,*,#331352,.T.); +#331490 = ORIENTED_EDGE('',*,*,#331385,.T.); +#331491 = ORIENTED_EDGE('',*,*,#331416,.T.); +#331492 = ORIENTED_EDGE('',*,*,#331449,.T.); +#331493 = PLANE('',#331494); +#331494 = AXIS2_PLACEMENT_3D('',#331495,#331496,#331497); +#331495 = CARTESIAN_POINT('',(0.,0.,1.55)); +#331496 = DIRECTION('',(0.,0.,1.)); +#331497 = DIRECTION('',(1.,0.,-0.)); +#331498 = MANIFOLD_SOLID_BREP('',#331499); +#331499 = CLOSED_SHELL('',(#331500,#331542,#331573,#331606,#331637, + #331670,#331701,#331734,#331756,#331772)); +#331500 = ADVANCED_FACE('',(#331501),#331537,.T.); +#331501 = FACE_BOUND('',#331502,.T.); +#331502 = EDGE_LOOP('',(#331503,#331513,#331522,#331530)); +#331503 = ORIENTED_EDGE('',*,*,#331504,.T.); +#331504 = EDGE_CURVE('',#331505,#331507,#331509,.T.); +#331505 = VERTEX_POINT('',#331506); +#331506 = CARTESIAN_POINT('',(126.3,-78.275,1.51)); +#331507 = VERTEX_POINT('',#331508); +#331508 = CARTESIAN_POINT('',(126.3,-78.275,1.55)); +#331509 = LINE('',#331510,#331511); +#331510 = CARTESIAN_POINT('',(126.3,-78.275,1.51)); +#331511 = VECTOR('',#331512,1.); +#331512 = DIRECTION('',(0.,0.,1.)); +#331513 = ORIENTED_EDGE('',*,*,#331514,.T.); +#331514 = EDGE_CURVE('',#331507,#331515,#331517,.T.); +#331515 = VERTEX_POINT('',#331516); +#331516 = CARTESIAN_POINT('',(126.55,-78.025,1.55)); +#331517 = CIRCLE('',#331518,0.249998959685); +#331518 = AXIS2_PLACEMENT_3D('',#331519,#331520,#331521); +#331519 = CARTESIAN_POINT('',(126.54999895968,-78.27499895968,1.55)); +#331520 = DIRECTION('',(0.,0.,-1.)); +#331521 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331522 = ORIENTED_EDGE('',*,*,#331523,.F.); +#331523 = EDGE_CURVE('',#331524,#331515,#331526,.T.); +#331524 = VERTEX_POINT('',#331525); +#331525 = CARTESIAN_POINT('',(126.55,-78.025,1.51)); +#331526 = LINE('',#331527,#331528); +#331527 = CARTESIAN_POINT('',(126.55,-78.025,1.51)); +#331528 = VECTOR('',#331529,1.); +#331529 = DIRECTION('',(0.,0.,1.)); +#331530 = ORIENTED_EDGE('',*,*,#331531,.F.); +#331531 = EDGE_CURVE('',#331505,#331524,#331532,.T.); +#331532 = CIRCLE('',#331533,0.249998959685); +#331533 = AXIS2_PLACEMENT_3D('',#331534,#331535,#331536); +#331534 = CARTESIAN_POINT('',(126.54999895968,-78.27499895968,1.51)); +#331535 = DIRECTION('',(0.,0.,-1.)); +#331536 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331537 = CYLINDRICAL_SURFACE('',#331538,0.249998959685); +#331538 = AXIS2_PLACEMENT_3D('',#331539,#331540,#331541); +#331539 = CARTESIAN_POINT('',(126.54999895968,-78.27499895968,1.51)); +#331540 = DIRECTION('',(0.,0.,-1.)); +#331541 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331542 = ADVANCED_FACE('',(#331543),#331568,.T.); +#331543 = FACE_BOUND('',#331544,.T.); +#331544 = EDGE_LOOP('',(#331545,#331546,#331554,#331562)); +#331545 = ORIENTED_EDGE('',*,*,#331523,.T.); +#331546 = ORIENTED_EDGE('',*,*,#331547,.T.); +#331547 = EDGE_CURVE('',#331515,#331548,#331550,.T.); +#331548 = VERTEX_POINT('',#331549); +#331549 = CARTESIAN_POINT('',(127.25,-78.025,1.55)); +#331550 = LINE('',#331551,#331552); +#331551 = CARTESIAN_POINT('',(126.55,-78.025,1.55)); +#331552 = VECTOR('',#331553,1.); +#331553 = DIRECTION('',(1.,0.,0.)); +#331554 = ORIENTED_EDGE('',*,*,#331555,.F.); +#331555 = EDGE_CURVE('',#331556,#331548,#331558,.T.); +#331556 = VERTEX_POINT('',#331557); +#331557 = CARTESIAN_POINT('',(127.25,-78.025,1.51)); +#331558 = LINE('',#331559,#331560); +#331559 = CARTESIAN_POINT('',(127.25,-78.025,1.51)); +#331560 = VECTOR('',#331561,1.); +#331561 = DIRECTION('',(0.,0.,1.)); +#331562 = ORIENTED_EDGE('',*,*,#331563,.F.); +#331563 = EDGE_CURVE('',#331524,#331556,#331564,.T.); +#331564 = LINE('',#331565,#331566); +#331565 = CARTESIAN_POINT('',(126.55,-78.025,1.51)); +#331566 = VECTOR('',#331567,1.); +#331567 = DIRECTION('',(1.,0.,0.)); +#331568 = PLANE('',#331569); +#331569 = AXIS2_PLACEMENT_3D('',#331570,#331571,#331572); +#331570 = CARTESIAN_POINT('',(126.55,-78.025,1.51)); +#331571 = DIRECTION('',(0.,1.,0.)); +#331572 = DIRECTION('',(1.,0.,0.)); +#331573 = ADVANCED_FACE('',(#331574),#331601,.T.); +#331574 = FACE_BOUND('',#331575,.T.); +#331575 = EDGE_LOOP('',(#331576,#331577,#331586,#331594)); +#331576 = ORIENTED_EDGE('',*,*,#331555,.T.); +#331577 = ORIENTED_EDGE('',*,*,#331578,.T.); +#331578 = EDGE_CURVE('',#331548,#331579,#331581,.T.); +#331579 = VERTEX_POINT('',#331580); +#331580 = CARTESIAN_POINT('',(127.5,-78.275,1.55)); +#331581 = CIRCLE('',#331582,0.249998959685); +#331582 = AXIS2_PLACEMENT_3D('',#331583,#331584,#331585); +#331583 = CARTESIAN_POINT('',(127.25000104031,-78.27499895968,1.55)); +#331584 = DIRECTION('',(0.,0.,-1.)); +#331585 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331586 = ORIENTED_EDGE('',*,*,#331587,.F.); +#331587 = EDGE_CURVE('',#331588,#331579,#331590,.T.); +#331588 = VERTEX_POINT('',#331589); +#331589 = CARTESIAN_POINT('',(127.5,-78.275,1.51)); +#331590 = LINE('',#331591,#331592); +#331591 = CARTESIAN_POINT('',(127.5,-78.275,1.51)); +#331592 = VECTOR('',#331593,1.); +#331593 = DIRECTION('',(0.,0.,1.)); +#331594 = ORIENTED_EDGE('',*,*,#331595,.F.); +#331595 = EDGE_CURVE('',#331556,#331588,#331596,.T.); +#331596 = CIRCLE('',#331597,0.249998959685); +#331597 = AXIS2_PLACEMENT_3D('',#331598,#331599,#331600); +#331598 = CARTESIAN_POINT('',(127.25000104031,-78.27499895968,1.51)); +#331599 = DIRECTION('',(0.,0.,-1.)); +#331600 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331601 = CYLINDRICAL_SURFACE('',#331602,0.249998959685); +#331602 = AXIS2_PLACEMENT_3D('',#331603,#331604,#331605); +#331603 = CARTESIAN_POINT('',(127.25000104031,-78.27499895968,1.51)); +#331604 = DIRECTION('',(0.,0.,-1.)); +#331605 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331606 = ADVANCED_FACE('',(#331607),#331632,.T.); +#331607 = FACE_BOUND('',#331608,.T.); +#331608 = EDGE_LOOP('',(#331609,#331610,#331618,#331626)); +#331609 = ORIENTED_EDGE('',*,*,#331587,.T.); +#331610 = ORIENTED_EDGE('',*,*,#331611,.T.); +#331611 = EDGE_CURVE('',#331579,#331612,#331614,.T.); +#331612 = VERTEX_POINT('',#331613); +#331613 = CARTESIAN_POINT('',(127.5,-79.575,1.55)); +#331614 = LINE('',#331615,#331616); +#331615 = CARTESIAN_POINT('',(127.5,-78.275,1.55)); +#331616 = VECTOR('',#331617,1.); +#331617 = DIRECTION('',(0.,-1.,0.)); +#331618 = ORIENTED_EDGE('',*,*,#331619,.F.); +#331619 = EDGE_CURVE('',#331620,#331612,#331622,.T.); +#331620 = VERTEX_POINT('',#331621); +#331621 = CARTESIAN_POINT('',(127.5,-79.575,1.51)); +#331622 = LINE('',#331623,#331624); +#331623 = CARTESIAN_POINT('',(127.5,-79.575,1.51)); +#331624 = VECTOR('',#331625,1.); +#331625 = DIRECTION('',(0.,0.,1.)); +#331626 = ORIENTED_EDGE('',*,*,#331627,.F.); +#331627 = EDGE_CURVE('',#331588,#331620,#331628,.T.); +#331628 = LINE('',#331629,#331630); +#331629 = CARTESIAN_POINT('',(127.5,-78.275,1.51)); +#331630 = VECTOR('',#331631,1.); +#331631 = DIRECTION('',(0.,-1.,0.)); +#331632 = PLANE('',#331633); +#331633 = AXIS2_PLACEMENT_3D('',#331634,#331635,#331636); +#331634 = CARTESIAN_POINT('',(127.5,-78.275,1.51)); +#331635 = DIRECTION('',(1.,0.,-0.)); +#331636 = DIRECTION('',(0.,-1.,0.)); +#331637 = ADVANCED_FACE('',(#331638),#331665,.T.); +#331638 = FACE_BOUND('',#331639,.T.); +#331639 = EDGE_LOOP('',(#331640,#331641,#331650,#331658)); +#331640 = ORIENTED_EDGE('',*,*,#331619,.T.); +#331641 = ORIENTED_EDGE('',*,*,#331642,.T.); +#331642 = EDGE_CURVE('',#331612,#331643,#331645,.T.); +#331643 = VERTEX_POINT('',#331644); +#331644 = CARTESIAN_POINT('',(127.25,-79.825,1.55)); +#331645 = CIRCLE('',#331646,0.249998959685); +#331646 = AXIS2_PLACEMENT_3D('',#331647,#331648,#331649); +#331647 = CARTESIAN_POINT('',(127.25000104031,-79.57500104031,1.55)); +#331648 = DIRECTION('',(0.,0.,-1.)); +#331649 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331650 = ORIENTED_EDGE('',*,*,#331651,.F.); +#331651 = EDGE_CURVE('',#331652,#331643,#331654,.T.); +#331652 = VERTEX_POINT('',#331653); +#331653 = CARTESIAN_POINT('',(127.25,-79.825,1.51)); +#331654 = LINE('',#331655,#331656); +#331655 = CARTESIAN_POINT('',(127.25,-79.825,1.51)); +#331656 = VECTOR('',#331657,1.); +#331657 = DIRECTION('',(0.,0.,1.)); +#331658 = ORIENTED_EDGE('',*,*,#331659,.F.); +#331659 = EDGE_CURVE('',#331620,#331652,#331660,.T.); +#331660 = CIRCLE('',#331661,0.249998959685); +#331661 = AXIS2_PLACEMENT_3D('',#331662,#331663,#331664); +#331662 = CARTESIAN_POINT('',(127.25000104031,-79.57500104031,1.51)); +#331663 = DIRECTION('',(0.,0.,-1.)); +#331664 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331665 = CYLINDRICAL_SURFACE('',#331666,0.249998959685); +#331666 = AXIS2_PLACEMENT_3D('',#331667,#331668,#331669); +#331667 = CARTESIAN_POINT('',(127.25000104031,-79.57500104031,1.51)); +#331668 = DIRECTION('',(0.,0.,-1.)); +#331669 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331670 = ADVANCED_FACE('',(#331671),#331696,.T.); +#331671 = FACE_BOUND('',#331672,.T.); +#331672 = EDGE_LOOP('',(#331673,#331674,#331682,#331690)); +#331673 = ORIENTED_EDGE('',*,*,#331651,.T.); +#331674 = ORIENTED_EDGE('',*,*,#331675,.T.); +#331675 = EDGE_CURVE('',#331643,#331676,#331678,.T.); +#331676 = VERTEX_POINT('',#331677); +#331677 = CARTESIAN_POINT('',(126.55,-79.825,1.55)); +#331678 = LINE('',#331679,#331680); +#331679 = CARTESIAN_POINT('',(127.25,-79.825,1.55)); +#331680 = VECTOR('',#331681,1.); +#331681 = DIRECTION('',(-1.,0.,0.)); +#331682 = ORIENTED_EDGE('',*,*,#331683,.F.); +#331683 = EDGE_CURVE('',#331684,#331676,#331686,.T.); +#331684 = VERTEX_POINT('',#331685); +#331685 = CARTESIAN_POINT('',(126.55,-79.825,1.51)); +#331686 = LINE('',#331687,#331688); +#331687 = CARTESIAN_POINT('',(126.55,-79.825,1.51)); +#331688 = VECTOR('',#331689,1.); +#331689 = DIRECTION('',(0.,0.,1.)); +#331690 = ORIENTED_EDGE('',*,*,#331691,.F.); +#331691 = EDGE_CURVE('',#331652,#331684,#331692,.T.); +#331692 = LINE('',#331693,#331694); +#331693 = CARTESIAN_POINT('',(127.25,-79.825,1.51)); +#331694 = VECTOR('',#331695,1.); +#331695 = DIRECTION('',(-1.,0.,0.)); +#331696 = PLANE('',#331697); +#331697 = AXIS2_PLACEMENT_3D('',#331698,#331699,#331700); +#331698 = CARTESIAN_POINT('',(127.25,-79.825,1.51)); +#331699 = DIRECTION('',(0.,-1.,0.)); +#331700 = DIRECTION('',(-1.,0.,0.)); +#331701 = ADVANCED_FACE('',(#331702),#331729,.T.); +#331702 = FACE_BOUND('',#331703,.T.); +#331703 = EDGE_LOOP('',(#331704,#331705,#331714,#331722)); +#331704 = ORIENTED_EDGE('',*,*,#331683,.T.); +#331705 = ORIENTED_EDGE('',*,*,#331706,.T.); +#331706 = EDGE_CURVE('',#331676,#331707,#331709,.T.); +#331707 = VERTEX_POINT('',#331708); +#331708 = CARTESIAN_POINT('',(126.3,-79.575,1.55)); +#331709 = CIRCLE('',#331710,0.249998959685); +#331710 = AXIS2_PLACEMENT_3D('',#331711,#331712,#331713); +#331711 = CARTESIAN_POINT('',(126.54999895968,-79.57500104031,1.55)); +#331712 = DIRECTION('',(0.,0.,-1.)); +#331713 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#331714 = ORIENTED_EDGE('',*,*,#331715,.F.); +#331715 = EDGE_CURVE('',#331716,#331707,#331718,.T.); +#331716 = VERTEX_POINT('',#331717); +#331717 = CARTESIAN_POINT('',(126.3,-79.575,1.51)); +#331718 = LINE('',#331719,#331720); +#331719 = CARTESIAN_POINT('',(126.3,-79.575,1.51)); +#331720 = VECTOR('',#331721,1.); +#331721 = DIRECTION('',(0.,0.,1.)); +#331722 = ORIENTED_EDGE('',*,*,#331723,.F.); +#331723 = EDGE_CURVE('',#331684,#331716,#331724,.T.); +#331724 = CIRCLE('',#331725,0.249998959685); +#331725 = AXIS2_PLACEMENT_3D('',#331726,#331727,#331728); +#331726 = CARTESIAN_POINT('',(126.54999895968,-79.57500104031,1.51)); +#331727 = DIRECTION('',(0.,0.,-1.)); +#331728 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#331729 = CYLINDRICAL_SURFACE('',#331730,0.249998959685); +#331730 = AXIS2_PLACEMENT_3D('',#331731,#331732,#331733); +#331731 = CARTESIAN_POINT('',(126.54999895968,-79.57500104031,1.51)); +#331732 = DIRECTION('',(0.,0.,-1.)); +#331733 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#331734 = ADVANCED_FACE('',(#331735),#331751,.T.); +#331735 = FACE_BOUND('',#331736,.T.); +#331736 = EDGE_LOOP('',(#331737,#331738,#331744,#331745)); +#331737 = ORIENTED_EDGE('',*,*,#331715,.T.); +#331738 = ORIENTED_EDGE('',*,*,#331739,.T.); +#331739 = EDGE_CURVE('',#331707,#331507,#331740,.T.); +#331740 = LINE('',#331741,#331742); +#331741 = CARTESIAN_POINT('',(126.3,-79.575,1.55)); +#331742 = VECTOR('',#331743,1.); +#331743 = DIRECTION('',(0.,1.,0.)); +#331744 = ORIENTED_EDGE('',*,*,#331504,.F.); +#331745 = ORIENTED_EDGE('',*,*,#331746,.F.); +#331746 = EDGE_CURVE('',#331716,#331505,#331747,.T.); +#331747 = LINE('',#331748,#331749); +#331748 = CARTESIAN_POINT('',(126.3,-79.575,1.51)); +#331749 = VECTOR('',#331750,1.); +#331750 = DIRECTION('',(0.,1.,0.)); +#331751 = PLANE('',#331752); +#331752 = AXIS2_PLACEMENT_3D('',#331753,#331754,#331755); +#331753 = CARTESIAN_POINT('',(126.3,-79.575,1.51)); +#331754 = DIRECTION('',(-1.,0.,0.)); +#331755 = DIRECTION('',(0.,1.,0.)); +#331756 = ADVANCED_FACE('',(#331757),#331767,.F.); +#331757 = FACE_BOUND('',#331758,.T.); +#331758 = EDGE_LOOP('',(#331759,#331760,#331761,#331762,#331763,#331764, + #331765,#331766)); +#331759 = ORIENTED_EDGE('',*,*,#331531,.T.); +#331760 = ORIENTED_EDGE('',*,*,#331563,.T.); +#331761 = ORIENTED_EDGE('',*,*,#331595,.T.); +#331762 = ORIENTED_EDGE('',*,*,#331627,.T.); +#331763 = ORIENTED_EDGE('',*,*,#331659,.T.); +#331764 = ORIENTED_EDGE('',*,*,#331691,.T.); +#331765 = ORIENTED_EDGE('',*,*,#331723,.T.); +#331766 = ORIENTED_EDGE('',*,*,#331746,.T.); +#331767 = PLANE('',#331768); +#331768 = AXIS2_PLACEMENT_3D('',#331769,#331770,#331771); +#331769 = CARTESIAN_POINT('',(0.,0.,1.51)); +#331770 = DIRECTION('',(0.,0.,1.)); +#331771 = DIRECTION('',(1.,0.,-0.)); +#331772 = ADVANCED_FACE('',(#331773),#331783,.T.); +#331773 = FACE_BOUND('',#331774,.F.); +#331774 = EDGE_LOOP('',(#331775,#331776,#331777,#331778,#331779,#331780, + #331781,#331782)); +#331775 = ORIENTED_EDGE('',*,*,#331514,.T.); +#331776 = ORIENTED_EDGE('',*,*,#331547,.T.); +#331777 = ORIENTED_EDGE('',*,*,#331578,.T.); +#331778 = ORIENTED_EDGE('',*,*,#331611,.T.); +#331779 = ORIENTED_EDGE('',*,*,#331642,.T.); +#331780 = ORIENTED_EDGE('',*,*,#331675,.T.); +#331781 = ORIENTED_EDGE('',*,*,#331706,.T.); +#331782 = ORIENTED_EDGE('',*,*,#331739,.T.); +#331783 = PLANE('',#331784); +#331784 = AXIS2_PLACEMENT_3D('',#331785,#331786,#331787); +#331785 = CARTESIAN_POINT('',(0.,0.,1.55)); +#331786 = DIRECTION('',(0.,0.,1.)); +#331787 = DIRECTION('',(1.,0.,-0.)); +#331788 = MANIFOLD_SOLID_BREP('',#331789); +#331789 = CLOSED_SHELL('',(#331790,#331832,#331863,#331896,#331927, + #331960,#331991,#332024,#332046,#332062)); +#331790 = ADVANCED_FACE('',(#331791),#331827,.T.); +#331791 = FACE_BOUND('',#331792,.T.); +#331792 = EDGE_LOOP('',(#331793,#331803,#331812,#331820)); +#331793 = ORIENTED_EDGE('',*,*,#331794,.T.); +#331794 = EDGE_CURVE('',#331795,#331797,#331799,.T.); +#331795 = VERTEX_POINT('',#331796); +#331796 = CARTESIAN_POINT('',(120.7,-78.275,1.51)); +#331797 = VERTEX_POINT('',#331798); +#331798 = CARTESIAN_POINT('',(120.7,-78.275,1.55)); +#331799 = LINE('',#331800,#331801); +#331800 = CARTESIAN_POINT('',(120.7,-78.275,1.51)); +#331801 = VECTOR('',#331802,1.); +#331802 = DIRECTION('',(0.,0.,1.)); +#331803 = ORIENTED_EDGE('',*,*,#331804,.T.); +#331804 = EDGE_CURVE('',#331797,#331805,#331807,.T.); +#331805 = VERTEX_POINT('',#331806); +#331806 = CARTESIAN_POINT('',(120.95,-78.025,1.55)); +#331807 = CIRCLE('',#331808,0.249998959685); +#331808 = AXIS2_PLACEMENT_3D('',#331809,#331810,#331811); +#331809 = CARTESIAN_POINT('',(120.94999895968,-78.27499895968,1.55)); +#331810 = DIRECTION('',(0.,0.,-1.)); +#331811 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331812 = ORIENTED_EDGE('',*,*,#331813,.F.); +#331813 = EDGE_CURVE('',#331814,#331805,#331816,.T.); +#331814 = VERTEX_POINT('',#331815); +#331815 = CARTESIAN_POINT('',(120.95,-78.025,1.51)); +#331816 = LINE('',#331817,#331818); +#331817 = CARTESIAN_POINT('',(120.95,-78.025,1.51)); +#331818 = VECTOR('',#331819,1.); +#331819 = DIRECTION('',(0.,0.,1.)); +#331820 = ORIENTED_EDGE('',*,*,#331821,.F.); +#331821 = EDGE_CURVE('',#331795,#331814,#331822,.T.); +#331822 = CIRCLE('',#331823,0.249998959685); +#331823 = AXIS2_PLACEMENT_3D('',#331824,#331825,#331826); +#331824 = CARTESIAN_POINT('',(120.94999895968,-78.27499895968,1.51)); +#331825 = DIRECTION('',(0.,0.,-1.)); +#331826 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331827 = CYLINDRICAL_SURFACE('',#331828,0.249998959685); +#331828 = AXIS2_PLACEMENT_3D('',#331829,#331830,#331831); +#331829 = CARTESIAN_POINT('',(120.94999895968,-78.27499895968,1.51)); +#331830 = DIRECTION('',(0.,0.,-1.)); +#331831 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#331832 = ADVANCED_FACE('',(#331833),#331858,.T.); +#331833 = FACE_BOUND('',#331834,.T.); +#331834 = EDGE_LOOP('',(#331835,#331836,#331844,#331852)); +#331835 = ORIENTED_EDGE('',*,*,#331813,.T.); +#331836 = ORIENTED_EDGE('',*,*,#331837,.T.); +#331837 = EDGE_CURVE('',#331805,#331838,#331840,.T.); +#331838 = VERTEX_POINT('',#331839); +#331839 = CARTESIAN_POINT('',(121.65,-78.025,1.55)); +#331840 = LINE('',#331841,#331842); +#331841 = CARTESIAN_POINT('',(120.95,-78.025,1.55)); +#331842 = VECTOR('',#331843,1.); +#331843 = DIRECTION('',(1.,0.,0.)); +#331844 = ORIENTED_EDGE('',*,*,#331845,.F.); +#331845 = EDGE_CURVE('',#331846,#331838,#331848,.T.); +#331846 = VERTEX_POINT('',#331847); +#331847 = CARTESIAN_POINT('',(121.65,-78.025,1.51)); +#331848 = LINE('',#331849,#331850); +#331849 = CARTESIAN_POINT('',(121.65,-78.025,1.51)); +#331850 = VECTOR('',#331851,1.); +#331851 = DIRECTION('',(0.,0.,1.)); +#331852 = ORIENTED_EDGE('',*,*,#331853,.F.); +#331853 = EDGE_CURVE('',#331814,#331846,#331854,.T.); +#331854 = LINE('',#331855,#331856); +#331855 = CARTESIAN_POINT('',(120.95,-78.025,1.51)); +#331856 = VECTOR('',#331857,1.); +#331857 = DIRECTION('',(1.,0.,0.)); +#331858 = PLANE('',#331859); +#331859 = AXIS2_PLACEMENT_3D('',#331860,#331861,#331862); +#331860 = CARTESIAN_POINT('',(120.95,-78.025,1.51)); +#331861 = DIRECTION('',(0.,1.,0.)); +#331862 = DIRECTION('',(1.,0.,0.)); +#331863 = ADVANCED_FACE('',(#331864),#331891,.T.); +#331864 = FACE_BOUND('',#331865,.T.); +#331865 = EDGE_LOOP('',(#331866,#331867,#331876,#331884)); +#331866 = ORIENTED_EDGE('',*,*,#331845,.T.); +#331867 = ORIENTED_EDGE('',*,*,#331868,.T.); +#331868 = EDGE_CURVE('',#331838,#331869,#331871,.T.); +#331869 = VERTEX_POINT('',#331870); +#331870 = CARTESIAN_POINT('',(121.9,-78.275,1.55)); +#331871 = CIRCLE('',#331872,0.249998959685); +#331872 = AXIS2_PLACEMENT_3D('',#331873,#331874,#331875); +#331873 = CARTESIAN_POINT('',(121.65000104031,-78.27499895968,1.55)); +#331874 = DIRECTION('',(0.,0.,-1.)); +#331875 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331876 = ORIENTED_EDGE('',*,*,#331877,.F.); +#331877 = EDGE_CURVE('',#331878,#331869,#331880,.T.); +#331878 = VERTEX_POINT('',#331879); +#331879 = CARTESIAN_POINT('',(121.9,-78.275,1.51)); +#331880 = LINE('',#331881,#331882); +#331881 = CARTESIAN_POINT('',(121.9,-78.275,1.51)); +#331882 = VECTOR('',#331883,1.); +#331883 = DIRECTION('',(0.,0.,1.)); +#331884 = ORIENTED_EDGE('',*,*,#331885,.F.); +#331885 = EDGE_CURVE('',#331846,#331878,#331886,.T.); +#331886 = CIRCLE('',#331887,0.249998959685); +#331887 = AXIS2_PLACEMENT_3D('',#331888,#331889,#331890); +#331888 = CARTESIAN_POINT('',(121.65000104031,-78.27499895968,1.51)); +#331889 = DIRECTION('',(0.,0.,-1.)); +#331890 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331891 = CYLINDRICAL_SURFACE('',#331892,0.249998959685); +#331892 = AXIS2_PLACEMENT_3D('',#331893,#331894,#331895); +#331893 = CARTESIAN_POINT('',(121.65000104031,-78.27499895968,1.51)); +#331894 = DIRECTION('',(0.,0.,-1.)); +#331895 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#331896 = ADVANCED_FACE('',(#331897),#331922,.T.); +#331897 = FACE_BOUND('',#331898,.T.); +#331898 = EDGE_LOOP('',(#331899,#331900,#331908,#331916)); +#331899 = ORIENTED_EDGE('',*,*,#331877,.T.); +#331900 = ORIENTED_EDGE('',*,*,#331901,.T.); +#331901 = EDGE_CURVE('',#331869,#331902,#331904,.T.); +#331902 = VERTEX_POINT('',#331903); +#331903 = CARTESIAN_POINT('',(121.9,-79.575,1.55)); +#331904 = LINE('',#331905,#331906); +#331905 = CARTESIAN_POINT('',(121.9,-78.275,1.55)); +#331906 = VECTOR('',#331907,1.); +#331907 = DIRECTION('',(0.,-1.,0.)); +#331908 = ORIENTED_EDGE('',*,*,#331909,.F.); +#331909 = EDGE_CURVE('',#331910,#331902,#331912,.T.); +#331910 = VERTEX_POINT('',#331911); +#331911 = CARTESIAN_POINT('',(121.9,-79.575,1.51)); +#331912 = LINE('',#331913,#331914); +#331913 = CARTESIAN_POINT('',(121.9,-79.575,1.51)); +#331914 = VECTOR('',#331915,1.); +#331915 = DIRECTION('',(0.,0.,1.)); +#331916 = ORIENTED_EDGE('',*,*,#331917,.F.); +#331917 = EDGE_CURVE('',#331878,#331910,#331918,.T.); +#331918 = LINE('',#331919,#331920); +#331919 = CARTESIAN_POINT('',(121.9,-78.275,1.51)); +#331920 = VECTOR('',#331921,1.); +#331921 = DIRECTION('',(0.,-1.,0.)); +#331922 = PLANE('',#331923); +#331923 = AXIS2_PLACEMENT_3D('',#331924,#331925,#331926); +#331924 = CARTESIAN_POINT('',(121.9,-78.275,1.51)); +#331925 = DIRECTION('',(1.,0.,-0.)); +#331926 = DIRECTION('',(0.,-1.,0.)); +#331927 = ADVANCED_FACE('',(#331928),#331955,.T.); +#331928 = FACE_BOUND('',#331929,.T.); +#331929 = EDGE_LOOP('',(#331930,#331931,#331940,#331948)); +#331930 = ORIENTED_EDGE('',*,*,#331909,.T.); +#331931 = ORIENTED_EDGE('',*,*,#331932,.T.); +#331932 = EDGE_CURVE('',#331902,#331933,#331935,.T.); +#331933 = VERTEX_POINT('',#331934); +#331934 = CARTESIAN_POINT('',(121.65,-79.825,1.55)); +#331935 = CIRCLE('',#331936,0.249998959685); +#331936 = AXIS2_PLACEMENT_3D('',#331937,#331938,#331939); +#331937 = CARTESIAN_POINT('',(121.65000104031,-79.57500104031,1.55)); +#331938 = DIRECTION('',(0.,0.,-1.)); +#331939 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331940 = ORIENTED_EDGE('',*,*,#331941,.F.); +#331941 = EDGE_CURVE('',#331942,#331933,#331944,.T.); +#331942 = VERTEX_POINT('',#331943); +#331943 = CARTESIAN_POINT('',(121.65,-79.825,1.51)); +#331944 = LINE('',#331945,#331946); +#331945 = CARTESIAN_POINT('',(121.65,-79.825,1.51)); +#331946 = VECTOR('',#331947,1.); +#331947 = DIRECTION('',(0.,0.,1.)); +#331948 = ORIENTED_EDGE('',*,*,#331949,.F.); +#331949 = EDGE_CURVE('',#331910,#331942,#331950,.T.); +#331950 = CIRCLE('',#331951,0.249998959685); +#331951 = AXIS2_PLACEMENT_3D('',#331952,#331953,#331954); +#331952 = CARTESIAN_POINT('',(121.65000104031,-79.57500104031,1.51)); +#331953 = DIRECTION('',(0.,0.,-1.)); +#331954 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331955 = CYLINDRICAL_SURFACE('',#331956,0.249998959685); +#331956 = AXIS2_PLACEMENT_3D('',#331957,#331958,#331959); +#331957 = CARTESIAN_POINT('',(121.65000104031,-79.57500104031,1.51)); +#331958 = DIRECTION('',(0.,0.,-1.)); +#331959 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#331960 = ADVANCED_FACE('',(#331961),#331986,.T.); +#331961 = FACE_BOUND('',#331962,.T.); +#331962 = EDGE_LOOP('',(#331963,#331964,#331972,#331980)); +#331963 = ORIENTED_EDGE('',*,*,#331941,.T.); +#331964 = ORIENTED_EDGE('',*,*,#331965,.T.); +#331965 = EDGE_CURVE('',#331933,#331966,#331968,.T.); +#331966 = VERTEX_POINT('',#331967); +#331967 = CARTESIAN_POINT('',(120.95,-79.825,1.55)); +#331968 = LINE('',#331969,#331970); +#331969 = CARTESIAN_POINT('',(121.65,-79.825,1.55)); +#331970 = VECTOR('',#331971,1.); +#331971 = DIRECTION('',(-1.,0.,0.)); +#331972 = ORIENTED_EDGE('',*,*,#331973,.F.); +#331973 = EDGE_CURVE('',#331974,#331966,#331976,.T.); +#331974 = VERTEX_POINT('',#331975); +#331975 = CARTESIAN_POINT('',(120.95,-79.825,1.51)); +#331976 = LINE('',#331977,#331978); +#331977 = CARTESIAN_POINT('',(120.95,-79.825,1.51)); +#331978 = VECTOR('',#331979,1.); +#331979 = DIRECTION('',(0.,0.,1.)); +#331980 = ORIENTED_EDGE('',*,*,#331981,.F.); +#331981 = EDGE_CURVE('',#331942,#331974,#331982,.T.); +#331982 = LINE('',#331983,#331984); +#331983 = CARTESIAN_POINT('',(121.65,-79.825,1.51)); +#331984 = VECTOR('',#331985,1.); +#331985 = DIRECTION('',(-1.,0.,0.)); +#331986 = PLANE('',#331987); +#331987 = AXIS2_PLACEMENT_3D('',#331988,#331989,#331990); +#331988 = CARTESIAN_POINT('',(121.65,-79.825,1.51)); +#331989 = DIRECTION('',(0.,-1.,0.)); +#331990 = DIRECTION('',(-1.,0.,0.)); +#331991 = ADVANCED_FACE('',(#331992),#332019,.T.); +#331992 = FACE_BOUND('',#331993,.T.); +#331993 = EDGE_LOOP('',(#331994,#331995,#332004,#332012)); +#331994 = ORIENTED_EDGE('',*,*,#331973,.T.); +#331995 = ORIENTED_EDGE('',*,*,#331996,.T.); +#331996 = EDGE_CURVE('',#331966,#331997,#331999,.T.); +#331997 = VERTEX_POINT('',#331998); +#331998 = CARTESIAN_POINT('',(120.7,-79.575,1.55)); +#331999 = CIRCLE('',#332000,0.249998959685); +#332000 = AXIS2_PLACEMENT_3D('',#332001,#332002,#332003); +#332001 = CARTESIAN_POINT('',(120.94999895968,-79.57500104031,1.55)); +#332002 = DIRECTION('',(0.,0.,-1.)); +#332003 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#332004 = ORIENTED_EDGE('',*,*,#332005,.F.); +#332005 = EDGE_CURVE('',#332006,#331997,#332008,.T.); +#332006 = VERTEX_POINT('',#332007); +#332007 = CARTESIAN_POINT('',(120.7,-79.575,1.51)); +#332008 = LINE('',#332009,#332010); +#332009 = CARTESIAN_POINT('',(120.7,-79.575,1.51)); +#332010 = VECTOR('',#332011,1.); +#332011 = DIRECTION('',(0.,0.,1.)); +#332012 = ORIENTED_EDGE('',*,*,#332013,.F.); +#332013 = EDGE_CURVE('',#331974,#332006,#332014,.T.); +#332014 = CIRCLE('',#332015,0.249998959685); +#332015 = AXIS2_PLACEMENT_3D('',#332016,#332017,#332018); +#332016 = CARTESIAN_POINT('',(120.94999895968,-79.57500104031,1.51)); +#332017 = DIRECTION('',(0.,0.,-1.)); +#332018 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#332019 = CYLINDRICAL_SURFACE('',#332020,0.249998959685); +#332020 = AXIS2_PLACEMENT_3D('',#332021,#332022,#332023); +#332021 = CARTESIAN_POINT('',(120.94999895968,-79.57500104031,1.51)); +#332022 = DIRECTION('',(0.,0.,-1.)); +#332023 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#332024 = ADVANCED_FACE('',(#332025),#332041,.T.); +#332025 = FACE_BOUND('',#332026,.T.); +#332026 = EDGE_LOOP('',(#332027,#332028,#332034,#332035)); +#332027 = ORIENTED_EDGE('',*,*,#332005,.T.); +#332028 = ORIENTED_EDGE('',*,*,#332029,.T.); +#332029 = EDGE_CURVE('',#331997,#331797,#332030,.T.); +#332030 = LINE('',#332031,#332032); +#332031 = CARTESIAN_POINT('',(120.7,-79.575,1.55)); +#332032 = VECTOR('',#332033,1.); +#332033 = DIRECTION('',(0.,1.,0.)); +#332034 = ORIENTED_EDGE('',*,*,#331794,.F.); +#332035 = ORIENTED_EDGE('',*,*,#332036,.F.); +#332036 = EDGE_CURVE('',#332006,#331795,#332037,.T.); +#332037 = LINE('',#332038,#332039); +#332038 = CARTESIAN_POINT('',(120.7,-79.575,1.51)); +#332039 = VECTOR('',#332040,1.); +#332040 = DIRECTION('',(0.,1.,0.)); +#332041 = PLANE('',#332042); +#332042 = AXIS2_PLACEMENT_3D('',#332043,#332044,#332045); +#332043 = CARTESIAN_POINT('',(120.7,-79.575,1.51)); +#332044 = DIRECTION('',(-1.,0.,0.)); +#332045 = DIRECTION('',(0.,1.,0.)); +#332046 = ADVANCED_FACE('',(#332047),#332057,.F.); +#332047 = FACE_BOUND('',#332048,.T.); +#332048 = EDGE_LOOP('',(#332049,#332050,#332051,#332052,#332053,#332054, + #332055,#332056)); +#332049 = ORIENTED_EDGE('',*,*,#331821,.T.); +#332050 = ORIENTED_EDGE('',*,*,#331853,.T.); +#332051 = ORIENTED_EDGE('',*,*,#331885,.T.); +#332052 = ORIENTED_EDGE('',*,*,#331917,.T.); +#332053 = ORIENTED_EDGE('',*,*,#331949,.T.); +#332054 = ORIENTED_EDGE('',*,*,#331981,.T.); +#332055 = ORIENTED_EDGE('',*,*,#332013,.T.); +#332056 = ORIENTED_EDGE('',*,*,#332036,.T.); +#332057 = PLANE('',#332058); +#332058 = AXIS2_PLACEMENT_3D('',#332059,#332060,#332061); +#332059 = CARTESIAN_POINT('',(0.,0.,1.51)); +#332060 = DIRECTION('',(0.,0.,1.)); +#332061 = DIRECTION('',(1.,0.,-0.)); +#332062 = ADVANCED_FACE('',(#332063),#332073,.T.); +#332063 = FACE_BOUND('',#332064,.F.); +#332064 = EDGE_LOOP('',(#332065,#332066,#332067,#332068,#332069,#332070, + #332071,#332072)); +#332065 = ORIENTED_EDGE('',*,*,#331804,.T.); +#332066 = ORIENTED_EDGE('',*,*,#331837,.T.); +#332067 = ORIENTED_EDGE('',*,*,#331868,.T.); +#332068 = ORIENTED_EDGE('',*,*,#331901,.T.); +#332069 = ORIENTED_EDGE('',*,*,#331932,.T.); +#332070 = ORIENTED_EDGE('',*,*,#331965,.T.); +#332071 = ORIENTED_EDGE('',*,*,#331996,.T.); +#332072 = ORIENTED_EDGE('',*,*,#332029,.T.); +#332073 = PLANE('',#332074); +#332074 = AXIS2_PLACEMENT_3D('',#332075,#332076,#332077); +#332075 = CARTESIAN_POINT('',(0.,0.,1.55)); +#332076 = DIRECTION('',(0.,0.,1.)); +#332077 = DIRECTION('',(1.,0.,-0.)); +#332078 = MANIFOLD_SOLID_BREP('',#332079); +#332079 = CLOSED_SHELL('',(#332080,#332122,#332153,#332186,#332217, + #332250,#332281,#332314,#332336,#332352)); +#332080 = ADVANCED_FACE('',(#332081),#332117,.T.); +#332081 = FACE_BOUND('',#332082,.T.); +#332082 = EDGE_LOOP('',(#332083,#332093,#332102,#332110)); +#332083 = ORIENTED_EDGE('',*,*,#332084,.T.); +#332084 = EDGE_CURVE('',#332085,#332087,#332089,.T.); +#332085 = VERTEX_POINT('',#332086); +#332086 = CARTESIAN_POINT('',(153.8,-101.95,1.51)); +#332087 = VERTEX_POINT('',#332088); +#332088 = CARTESIAN_POINT('',(153.8,-101.95,1.55)); +#332089 = LINE('',#332090,#332091); +#332090 = CARTESIAN_POINT('',(153.8,-101.95,1.51)); +#332091 = VECTOR('',#332092,1.); +#332092 = DIRECTION('',(0.,0.,1.)); +#332093 = ORIENTED_EDGE('',*,*,#332094,.T.); +#332094 = EDGE_CURVE('',#332087,#332095,#332097,.T.); +#332095 = VERTEX_POINT('',#332096); +#332096 = CARTESIAN_POINT('',(154.025,-101.725,1.55)); +#332097 = CIRCLE('',#332098,0.225000087974); +#332098 = AXIS2_PLACEMENT_3D('',#332099,#332100,#332101); +#332099 = CARTESIAN_POINT('',(154.02500008797,-101.9500000879,1.55)); +#332100 = DIRECTION('',(0.,0.,-1.)); +#332101 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#332102 = ORIENTED_EDGE('',*,*,#332103,.F.); +#332103 = EDGE_CURVE('',#332104,#332095,#332106,.T.); +#332104 = VERTEX_POINT('',#332105); +#332105 = CARTESIAN_POINT('',(154.025,-101.725,1.51)); +#332106 = LINE('',#332107,#332108); +#332107 = CARTESIAN_POINT('',(154.025,-101.725,1.51)); +#332108 = VECTOR('',#332109,1.); +#332109 = DIRECTION('',(0.,0.,1.)); +#332110 = ORIENTED_EDGE('',*,*,#332111,.F.); +#332111 = EDGE_CURVE('',#332085,#332104,#332112,.T.); +#332112 = CIRCLE('',#332113,0.225000087974); +#332113 = AXIS2_PLACEMENT_3D('',#332114,#332115,#332116); +#332114 = CARTESIAN_POINT('',(154.02500008797,-101.9500000879,1.51)); +#332115 = DIRECTION('',(0.,0.,-1.)); +#332116 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#332117 = CYLINDRICAL_SURFACE('',#332118,0.225000087974); +#332118 = AXIS2_PLACEMENT_3D('',#332119,#332120,#332121); +#332119 = CARTESIAN_POINT('',(154.02500008797,-101.9500000879,1.51)); +#332120 = DIRECTION('',(0.,0.,-1.)); +#332121 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#332122 = ADVANCED_FACE('',(#332123),#332148,.T.); +#332123 = FACE_BOUND('',#332124,.T.); +#332124 = EDGE_LOOP('',(#332125,#332126,#332134,#332142)); +#332125 = ORIENTED_EDGE('',*,*,#332103,.T.); +#332126 = ORIENTED_EDGE('',*,*,#332127,.T.); +#332127 = EDGE_CURVE('',#332095,#332128,#332130,.T.); +#332128 = VERTEX_POINT('',#332129); +#332129 = CARTESIAN_POINT('',(154.475,-101.725,1.55)); +#332130 = LINE('',#332131,#332132); +#332131 = CARTESIAN_POINT('',(154.025,-101.725,1.55)); +#332132 = VECTOR('',#332133,1.); +#332133 = DIRECTION('',(1.,0.,0.)); +#332134 = ORIENTED_EDGE('',*,*,#332135,.F.); +#332135 = EDGE_CURVE('',#332136,#332128,#332138,.T.); +#332136 = VERTEX_POINT('',#332137); +#332137 = CARTESIAN_POINT('',(154.475,-101.725,1.51)); +#332138 = LINE('',#332139,#332140); +#332139 = CARTESIAN_POINT('',(154.475,-101.725,1.51)); +#332140 = VECTOR('',#332141,1.); +#332141 = DIRECTION('',(0.,0.,1.)); +#332142 = ORIENTED_EDGE('',*,*,#332143,.F.); +#332143 = EDGE_CURVE('',#332104,#332136,#332144,.T.); +#332144 = LINE('',#332145,#332146); +#332145 = CARTESIAN_POINT('',(154.025,-101.725,1.51)); +#332146 = VECTOR('',#332147,1.); +#332147 = DIRECTION('',(1.,0.,0.)); +#332148 = PLANE('',#332149); +#332149 = AXIS2_PLACEMENT_3D('',#332150,#332151,#332152); +#332150 = CARTESIAN_POINT('',(154.025,-101.725,1.51)); +#332151 = DIRECTION('',(0.,1.,0.)); +#332152 = DIRECTION('',(1.,0.,0.)); +#332153 = ADVANCED_FACE('',(#332154),#332181,.T.); +#332154 = FACE_BOUND('',#332155,.T.); +#332155 = EDGE_LOOP('',(#332156,#332157,#332166,#332174)); +#332156 = ORIENTED_EDGE('',*,*,#332135,.T.); +#332157 = ORIENTED_EDGE('',*,*,#332158,.T.); +#332158 = EDGE_CURVE('',#332128,#332159,#332161,.T.); +#332159 = VERTEX_POINT('',#332160); +#332160 = CARTESIAN_POINT('',(154.7,-101.95,1.55)); +#332161 = CIRCLE('',#332162,0.225000087974); +#332162 = AXIS2_PLACEMENT_3D('',#332163,#332164,#332165); +#332163 = CARTESIAN_POINT('',(154.47499991202,-101.9500000879,1.55)); +#332164 = DIRECTION('',(0.,0.,-1.)); +#332165 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332166 = ORIENTED_EDGE('',*,*,#332167,.F.); +#332167 = EDGE_CURVE('',#332168,#332159,#332170,.T.); +#332168 = VERTEX_POINT('',#332169); +#332169 = CARTESIAN_POINT('',(154.7,-101.95,1.51)); +#332170 = LINE('',#332171,#332172); +#332171 = CARTESIAN_POINT('',(154.7,-101.95,1.51)); +#332172 = VECTOR('',#332173,1.); +#332173 = DIRECTION('',(0.,0.,1.)); +#332174 = ORIENTED_EDGE('',*,*,#332175,.F.); +#332175 = EDGE_CURVE('',#332136,#332168,#332176,.T.); +#332176 = CIRCLE('',#332177,0.225000087974); +#332177 = AXIS2_PLACEMENT_3D('',#332178,#332179,#332180); +#332178 = CARTESIAN_POINT('',(154.47499991202,-101.9500000879,1.51)); +#332179 = DIRECTION('',(0.,0.,-1.)); +#332180 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332181 = CYLINDRICAL_SURFACE('',#332182,0.225000087974); +#332182 = AXIS2_PLACEMENT_3D('',#332183,#332184,#332185); +#332183 = CARTESIAN_POINT('',(154.47499991202,-101.9500000879,1.51)); +#332184 = DIRECTION('',(0.,0.,-1.)); +#332185 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332186 = ADVANCED_FACE('',(#332187),#332212,.T.); +#332187 = FACE_BOUND('',#332188,.T.); +#332188 = EDGE_LOOP('',(#332189,#332190,#332198,#332206)); +#332189 = ORIENTED_EDGE('',*,*,#332167,.T.); +#332190 = ORIENTED_EDGE('',*,*,#332191,.T.); +#332191 = EDGE_CURVE('',#332159,#332192,#332194,.T.); +#332192 = VERTEX_POINT('',#332193); +#332193 = CARTESIAN_POINT('',(154.7,-102.8,1.55)); +#332194 = LINE('',#332195,#332196); +#332195 = CARTESIAN_POINT('',(154.7,-101.95,1.55)); +#332196 = VECTOR('',#332197,1.); +#332197 = DIRECTION('',(0.,-1.,0.)); +#332198 = ORIENTED_EDGE('',*,*,#332199,.F.); +#332199 = EDGE_CURVE('',#332200,#332192,#332202,.T.); +#332200 = VERTEX_POINT('',#332201); +#332201 = CARTESIAN_POINT('',(154.7,-102.8,1.51)); +#332202 = LINE('',#332203,#332204); +#332203 = CARTESIAN_POINT('',(154.7,-102.8,1.51)); +#332204 = VECTOR('',#332205,1.); +#332205 = DIRECTION('',(0.,0.,1.)); +#332206 = ORIENTED_EDGE('',*,*,#332207,.F.); +#332207 = EDGE_CURVE('',#332168,#332200,#332208,.T.); +#332208 = LINE('',#332209,#332210); +#332209 = CARTESIAN_POINT('',(154.7,-101.95,1.51)); +#332210 = VECTOR('',#332211,1.); +#332211 = DIRECTION('',(0.,-1.,0.)); +#332212 = PLANE('',#332213); +#332213 = AXIS2_PLACEMENT_3D('',#332214,#332215,#332216); +#332214 = CARTESIAN_POINT('',(154.7,-101.95,1.51)); +#332215 = DIRECTION('',(1.,0.,-0.)); +#332216 = DIRECTION('',(0.,-1.,0.)); +#332217 = ADVANCED_FACE('',(#332218),#332245,.T.); +#332218 = FACE_BOUND('',#332219,.T.); +#332219 = EDGE_LOOP('',(#332220,#332221,#332230,#332238)); +#332220 = ORIENTED_EDGE('',*,*,#332199,.T.); +#332221 = ORIENTED_EDGE('',*,*,#332222,.T.); +#332222 = EDGE_CURVE('',#332192,#332223,#332225,.T.); +#332223 = VERTEX_POINT('',#332224); +#332224 = CARTESIAN_POINT('',(154.475,-103.025,1.55)); +#332225 = CIRCLE('',#332226,0.225000087974); +#332226 = AXIS2_PLACEMENT_3D('',#332227,#332228,#332229); +#332227 = CARTESIAN_POINT('',(154.47499991202,-102.799999912,1.55)); +#332228 = DIRECTION('',(0.,0.,-1.)); +#332229 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#332230 = ORIENTED_EDGE('',*,*,#332231,.F.); +#332231 = EDGE_CURVE('',#332232,#332223,#332234,.T.); +#332232 = VERTEX_POINT('',#332233); +#332233 = CARTESIAN_POINT('',(154.475,-103.025,1.51)); +#332234 = LINE('',#332235,#332236); +#332235 = CARTESIAN_POINT('',(154.475,-103.025,1.51)); +#332236 = VECTOR('',#332237,1.); +#332237 = DIRECTION('',(0.,0.,1.)); +#332238 = ORIENTED_EDGE('',*,*,#332239,.F.); +#332239 = EDGE_CURVE('',#332200,#332232,#332240,.T.); +#332240 = CIRCLE('',#332241,0.225000087974); +#332241 = AXIS2_PLACEMENT_3D('',#332242,#332243,#332244); +#332242 = CARTESIAN_POINT('',(154.47499991202,-102.799999912,1.51)); +#332243 = DIRECTION('',(0.,0.,-1.)); +#332244 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#332245 = CYLINDRICAL_SURFACE('',#332246,0.225000087974); +#332246 = AXIS2_PLACEMENT_3D('',#332247,#332248,#332249); +#332247 = CARTESIAN_POINT('',(154.47499991202,-102.799999912,1.51)); +#332248 = DIRECTION('',(0.,0.,-1.)); +#332249 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#332250 = ADVANCED_FACE('',(#332251),#332276,.T.); +#332251 = FACE_BOUND('',#332252,.T.); +#332252 = EDGE_LOOP('',(#332253,#332254,#332262,#332270)); +#332253 = ORIENTED_EDGE('',*,*,#332231,.T.); +#332254 = ORIENTED_EDGE('',*,*,#332255,.T.); +#332255 = EDGE_CURVE('',#332223,#332256,#332258,.T.); +#332256 = VERTEX_POINT('',#332257); +#332257 = CARTESIAN_POINT('',(154.025,-103.025,1.55)); +#332258 = LINE('',#332259,#332260); +#332259 = CARTESIAN_POINT('',(154.475,-103.025,1.55)); +#332260 = VECTOR('',#332261,1.); +#332261 = DIRECTION('',(-1.,0.,0.)); +#332262 = ORIENTED_EDGE('',*,*,#332263,.F.); +#332263 = EDGE_CURVE('',#332264,#332256,#332266,.T.); +#332264 = VERTEX_POINT('',#332265); +#332265 = CARTESIAN_POINT('',(154.025,-103.025,1.51)); +#332266 = LINE('',#332267,#332268); +#332267 = CARTESIAN_POINT('',(154.025,-103.025,1.51)); +#332268 = VECTOR('',#332269,1.); +#332269 = DIRECTION('',(0.,0.,1.)); +#332270 = ORIENTED_EDGE('',*,*,#332271,.F.); +#332271 = EDGE_CURVE('',#332232,#332264,#332272,.T.); +#332272 = LINE('',#332273,#332274); +#332273 = CARTESIAN_POINT('',(154.475,-103.025,1.51)); +#332274 = VECTOR('',#332275,1.); +#332275 = DIRECTION('',(-1.,0.,0.)); +#332276 = PLANE('',#332277); +#332277 = AXIS2_PLACEMENT_3D('',#332278,#332279,#332280); +#332278 = CARTESIAN_POINT('',(154.475,-103.025,1.51)); +#332279 = DIRECTION('',(0.,-1.,0.)); +#332280 = DIRECTION('',(-1.,0.,0.)); +#332281 = ADVANCED_FACE('',(#332282),#332309,.T.); +#332282 = FACE_BOUND('',#332283,.T.); +#332283 = EDGE_LOOP('',(#332284,#332285,#332294,#332302)); +#332284 = ORIENTED_EDGE('',*,*,#332263,.T.); +#332285 = ORIENTED_EDGE('',*,*,#332286,.T.); +#332286 = EDGE_CURVE('',#332256,#332287,#332289,.T.); +#332287 = VERTEX_POINT('',#332288); +#332288 = CARTESIAN_POINT('',(153.8,-102.8,1.55)); +#332289 = CIRCLE('',#332290,0.225000087974); +#332290 = AXIS2_PLACEMENT_3D('',#332291,#332292,#332293); +#332291 = CARTESIAN_POINT('',(154.02500008797,-102.799999912,1.55)); +#332292 = DIRECTION('',(0.,0.,-1.)); +#332293 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332294 = ORIENTED_EDGE('',*,*,#332295,.F.); +#332295 = EDGE_CURVE('',#332296,#332287,#332298,.T.); +#332296 = VERTEX_POINT('',#332297); +#332297 = CARTESIAN_POINT('',(153.8,-102.8,1.51)); +#332298 = LINE('',#332299,#332300); +#332299 = CARTESIAN_POINT('',(153.8,-102.8,1.51)); +#332300 = VECTOR('',#332301,1.); +#332301 = DIRECTION('',(0.,0.,1.)); +#332302 = ORIENTED_EDGE('',*,*,#332303,.F.); +#332303 = EDGE_CURVE('',#332264,#332296,#332304,.T.); +#332304 = CIRCLE('',#332305,0.225000087974); +#332305 = AXIS2_PLACEMENT_3D('',#332306,#332307,#332308); +#332306 = CARTESIAN_POINT('',(154.02500008797,-102.799999912,1.51)); +#332307 = DIRECTION('',(0.,0.,-1.)); +#332308 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332309 = CYLINDRICAL_SURFACE('',#332310,0.225000087974); +#332310 = AXIS2_PLACEMENT_3D('',#332311,#332312,#332313); +#332311 = CARTESIAN_POINT('',(154.02500008797,-102.799999912,1.51)); +#332312 = DIRECTION('',(0.,0.,-1.)); +#332313 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332314 = ADVANCED_FACE('',(#332315),#332331,.T.); +#332315 = FACE_BOUND('',#332316,.T.); +#332316 = EDGE_LOOP('',(#332317,#332318,#332324,#332325)); +#332317 = ORIENTED_EDGE('',*,*,#332295,.T.); +#332318 = ORIENTED_EDGE('',*,*,#332319,.T.); +#332319 = EDGE_CURVE('',#332287,#332087,#332320,.T.); +#332320 = LINE('',#332321,#332322); +#332321 = CARTESIAN_POINT('',(153.8,-102.8,1.55)); +#332322 = VECTOR('',#332323,1.); +#332323 = DIRECTION('',(0.,1.,0.)); +#332324 = ORIENTED_EDGE('',*,*,#332084,.F.); +#332325 = ORIENTED_EDGE('',*,*,#332326,.F.); +#332326 = EDGE_CURVE('',#332296,#332085,#332327,.T.); +#332327 = LINE('',#332328,#332329); +#332328 = CARTESIAN_POINT('',(153.8,-102.8,1.51)); +#332329 = VECTOR('',#332330,1.); +#332330 = DIRECTION('',(0.,1.,0.)); +#332331 = PLANE('',#332332); +#332332 = AXIS2_PLACEMENT_3D('',#332333,#332334,#332335); +#332333 = CARTESIAN_POINT('',(153.8,-102.8,1.51)); +#332334 = DIRECTION('',(-1.,0.,0.)); +#332335 = DIRECTION('',(0.,1.,0.)); +#332336 = ADVANCED_FACE('',(#332337),#332347,.F.); +#332337 = FACE_BOUND('',#332338,.T.); +#332338 = EDGE_LOOP('',(#332339,#332340,#332341,#332342,#332343,#332344, + #332345,#332346)); +#332339 = ORIENTED_EDGE('',*,*,#332111,.T.); +#332340 = ORIENTED_EDGE('',*,*,#332143,.T.); +#332341 = ORIENTED_EDGE('',*,*,#332175,.T.); +#332342 = ORIENTED_EDGE('',*,*,#332207,.T.); +#332343 = ORIENTED_EDGE('',*,*,#332239,.T.); +#332344 = ORIENTED_EDGE('',*,*,#332271,.T.); +#332345 = ORIENTED_EDGE('',*,*,#332303,.T.); +#332346 = ORIENTED_EDGE('',*,*,#332326,.T.); +#332347 = PLANE('',#332348); +#332348 = AXIS2_PLACEMENT_3D('',#332349,#332350,#332351); +#332349 = CARTESIAN_POINT('',(0.,0.,1.51)); +#332350 = DIRECTION('',(0.,0.,1.)); +#332351 = DIRECTION('',(1.,0.,-0.)); +#332352 = ADVANCED_FACE('',(#332353),#332363,.T.); +#332353 = FACE_BOUND('',#332354,.F.); +#332354 = EDGE_LOOP('',(#332355,#332356,#332357,#332358,#332359,#332360, + #332361,#332362)); +#332355 = ORIENTED_EDGE('',*,*,#332094,.T.); +#332356 = ORIENTED_EDGE('',*,*,#332127,.T.); +#332357 = ORIENTED_EDGE('',*,*,#332158,.T.); +#332358 = ORIENTED_EDGE('',*,*,#332191,.T.); +#332359 = ORIENTED_EDGE('',*,*,#332222,.T.); +#332360 = ORIENTED_EDGE('',*,*,#332255,.T.); +#332361 = ORIENTED_EDGE('',*,*,#332286,.T.); +#332362 = ORIENTED_EDGE('',*,*,#332319,.T.); +#332363 = PLANE('',#332364); +#332364 = AXIS2_PLACEMENT_3D('',#332365,#332366,#332367); +#332365 = CARTESIAN_POINT('',(0.,0.,1.55)); +#332366 = DIRECTION('',(0.,0.,1.)); +#332367 = DIRECTION('',(1.,0.,-0.)); +#332368 = MANIFOLD_SOLID_BREP('',#332369); +#332369 = CLOSED_SHELL('',(#332370,#332412,#332443,#332476,#332507, + #332540,#332571,#332604,#332626,#332642)); +#332370 = ADVANCED_FACE('',(#332371),#332407,.T.); +#332371 = FACE_BOUND('',#332372,.T.); +#332372 = EDGE_LOOP('',(#332373,#332383,#332392,#332400)); +#332373 = ORIENTED_EDGE('',*,*,#332374,.T.); +#332374 = EDGE_CURVE('',#332375,#332377,#332379,.T.); +#332375 = VERTEX_POINT('',#332376); +#332376 = CARTESIAN_POINT('',(153.8,-98.25,1.51)); +#332377 = VERTEX_POINT('',#332378); +#332378 = CARTESIAN_POINT('',(153.8,-98.25,1.55)); +#332379 = LINE('',#332380,#332381); +#332380 = CARTESIAN_POINT('',(153.8,-98.25,1.51)); +#332381 = VECTOR('',#332382,1.); +#332382 = DIRECTION('',(0.,0.,1.)); +#332383 = ORIENTED_EDGE('',*,*,#332384,.T.); +#332384 = EDGE_CURVE('',#332377,#332385,#332387,.T.); +#332385 = VERTEX_POINT('',#332386); +#332386 = CARTESIAN_POINT('',(154.025,-98.025,1.55)); +#332387 = CIRCLE('',#332388,0.225000087974); +#332388 = AXIS2_PLACEMENT_3D('',#332389,#332390,#332391); +#332389 = CARTESIAN_POINT('',(154.02500008797,-98.25000008797,1.55)); +#332390 = DIRECTION('',(0.,0.,-1.)); +#332391 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#332392 = ORIENTED_EDGE('',*,*,#332393,.F.); +#332393 = EDGE_CURVE('',#332394,#332385,#332396,.T.); +#332394 = VERTEX_POINT('',#332395); +#332395 = CARTESIAN_POINT('',(154.025,-98.025,1.51)); +#332396 = LINE('',#332397,#332398); +#332397 = CARTESIAN_POINT('',(154.025,-98.025,1.51)); +#332398 = VECTOR('',#332399,1.); +#332399 = DIRECTION('',(0.,0.,1.)); +#332400 = ORIENTED_EDGE('',*,*,#332401,.F.); +#332401 = EDGE_CURVE('',#332375,#332394,#332402,.T.); +#332402 = CIRCLE('',#332403,0.225000087974); +#332403 = AXIS2_PLACEMENT_3D('',#332404,#332405,#332406); +#332404 = CARTESIAN_POINT('',(154.02500008797,-98.25000008797,1.51)); +#332405 = DIRECTION('',(0.,0.,-1.)); +#332406 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#332407 = CYLINDRICAL_SURFACE('',#332408,0.225000087974); +#332408 = AXIS2_PLACEMENT_3D('',#332409,#332410,#332411); +#332409 = CARTESIAN_POINT('',(154.02500008797,-98.25000008797,1.51)); +#332410 = DIRECTION('',(0.,0.,-1.)); +#332411 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#332412 = ADVANCED_FACE('',(#332413),#332438,.T.); +#332413 = FACE_BOUND('',#332414,.T.); +#332414 = EDGE_LOOP('',(#332415,#332416,#332424,#332432)); +#332415 = ORIENTED_EDGE('',*,*,#332393,.T.); +#332416 = ORIENTED_EDGE('',*,*,#332417,.T.); +#332417 = EDGE_CURVE('',#332385,#332418,#332420,.T.); +#332418 = VERTEX_POINT('',#332419); +#332419 = CARTESIAN_POINT('',(154.475,-98.025,1.55)); +#332420 = LINE('',#332421,#332422); +#332421 = CARTESIAN_POINT('',(154.025,-98.025,1.55)); +#332422 = VECTOR('',#332423,1.); +#332423 = DIRECTION('',(1.,0.,0.)); +#332424 = ORIENTED_EDGE('',*,*,#332425,.F.); +#332425 = EDGE_CURVE('',#332426,#332418,#332428,.T.); +#332426 = VERTEX_POINT('',#332427); +#332427 = CARTESIAN_POINT('',(154.475,-98.025,1.51)); +#332428 = LINE('',#332429,#332430); +#332429 = CARTESIAN_POINT('',(154.475,-98.025,1.51)); +#332430 = VECTOR('',#332431,1.); +#332431 = DIRECTION('',(0.,0.,1.)); +#332432 = ORIENTED_EDGE('',*,*,#332433,.F.); +#332433 = EDGE_CURVE('',#332394,#332426,#332434,.T.); +#332434 = LINE('',#332435,#332436); +#332435 = CARTESIAN_POINT('',(154.025,-98.025,1.51)); +#332436 = VECTOR('',#332437,1.); +#332437 = DIRECTION('',(1.,0.,0.)); +#332438 = PLANE('',#332439); +#332439 = AXIS2_PLACEMENT_3D('',#332440,#332441,#332442); +#332440 = CARTESIAN_POINT('',(154.025,-98.025,1.51)); +#332441 = DIRECTION('',(0.,1.,0.)); +#332442 = DIRECTION('',(1.,0.,0.)); +#332443 = ADVANCED_FACE('',(#332444),#332471,.T.); +#332444 = FACE_BOUND('',#332445,.T.); +#332445 = EDGE_LOOP('',(#332446,#332447,#332456,#332464)); +#332446 = ORIENTED_EDGE('',*,*,#332425,.T.); +#332447 = ORIENTED_EDGE('',*,*,#332448,.T.); +#332448 = EDGE_CURVE('',#332418,#332449,#332451,.T.); +#332449 = VERTEX_POINT('',#332450); +#332450 = CARTESIAN_POINT('',(154.7,-98.25,1.55)); +#332451 = CIRCLE('',#332452,0.225000087974); +#332452 = AXIS2_PLACEMENT_3D('',#332453,#332454,#332455); +#332453 = CARTESIAN_POINT('',(154.47499991202,-98.25000008797,1.55)); +#332454 = DIRECTION('',(0.,0.,-1.)); +#332455 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#332456 = ORIENTED_EDGE('',*,*,#332457,.F.); +#332457 = EDGE_CURVE('',#332458,#332449,#332460,.T.); +#332458 = VERTEX_POINT('',#332459); +#332459 = CARTESIAN_POINT('',(154.7,-98.25,1.51)); +#332460 = LINE('',#332461,#332462); +#332461 = CARTESIAN_POINT('',(154.7,-98.25,1.51)); +#332462 = VECTOR('',#332463,1.); +#332463 = DIRECTION('',(0.,0.,1.)); +#332464 = ORIENTED_EDGE('',*,*,#332465,.F.); +#332465 = EDGE_CURVE('',#332426,#332458,#332466,.T.); +#332466 = CIRCLE('',#332467,0.225000087974); +#332467 = AXIS2_PLACEMENT_3D('',#332468,#332469,#332470); +#332468 = CARTESIAN_POINT('',(154.47499991202,-98.25000008797,1.51)); +#332469 = DIRECTION('',(0.,0.,-1.)); +#332470 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#332471 = CYLINDRICAL_SURFACE('',#332472,0.225000087974); +#332472 = AXIS2_PLACEMENT_3D('',#332473,#332474,#332475); +#332473 = CARTESIAN_POINT('',(154.47499991202,-98.25000008797,1.51)); +#332474 = DIRECTION('',(0.,0.,-1.)); +#332475 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#332476 = ADVANCED_FACE('',(#332477),#332502,.T.); +#332477 = FACE_BOUND('',#332478,.T.); +#332478 = EDGE_LOOP('',(#332479,#332480,#332488,#332496)); +#332479 = ORIENTED_EDGE('',*,*,#332457,.T.); +#332480 = ORIENTED_EDGE('',*,*,#332481,.T.); +#332481 = EDGE_CURVE('',#332449,#332482,#332484,.T.); +#332482 = VERTEX_POINT('',#332483); +#332483 = CARTESIAN_POINT('',(154.7,-99.1,1.55)); +#332484 = LINE('',#332485,#332486); +#332485 = CARTESIAN_POINT('',(154.7,-98.25,1.55)); +#332486 = VECTOR('',#332487,1.); +#332487 = DIRECTION('',(0.,-1.,0.)); +#332488 = ORIENTED_EDGE('',*,*,#332489,.F.); +#332489 = EDGE_CURVE('',#332490,#332482,#332492,.T.); +#332490 = VERTEX_POINT('',#332491); +#332491 = CARTESIAN_POINT('',(154.7,-99.1,1.51)); +#332492 = LINE('',#332493,#332494); +#332493 = CARTESIAN_POINT('',(154.7,-99.1,1.51)); +#332494 = VECTOR('',#332495,1.); +#332495 = DIRECTION('',(0.,0.,1.)); +#332496 = ORIENTED_EDGE('',*,*,#332497,.F.); +#332497 = EDGE_CURVE('',#332458,#332490,#332498,.T.); +#332498 = LINE('',#332499,#332500); +#332499 = CARTESIAN_POINT('',(154.7,-98.25,1.51)); +#332500 = VECTOR('',#332501,1.); +#332501 = DIRECTION('',(0.,-1.,0.)); +#332502 = PLANE('',#332503); +#332503 = AXIS2_PLACEMENT_3D('',#332504,#332505,#332506); +#332504 = CARTESIAN_POINT('',(154.7,-98.25,1.51)); +#332505 = DIRECTION('',(1.,0.,-0.)); +#332506 = DIRECTION('',(0.,-1.,0.)); +#332507 = ADVANCED_FACE('',(#332508),#332535,.T.); +#332508 = FACE_BOUND('',#332509,.T.); +#332509 = EDGE_LOOP('',(#332510,#332511,#332520,#332528)); +#332510 = ORIENTED_EDGE('',*,*,#332489,.T.); +#332511 = ORIENTED_EDGE('',*,*,#332512,.T.); +#332512 = EDGE_CURVE('',#332482,#332513,#332515,.T.); +#332513 = VERTEX_POINT('',#332514); +#332514 = CARTESIAN_POINT('',(154.475,-99.325,1.55)); +#332515 = CIRCLE('',#332516,0.225000087974); +#332516 = AXIS2_PLACEMENT_3D('',#332517,#332518,#332519); +#332517 = CARTESIAN_POINT('',(154.47499991202,-99.09999991202,1.55)); +#332518 = DIRECTION('',(0.,0.,-1.)); +#332519 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#332520 = ORIENTED_EDGE('',*,*,#332521,.F.); +#332521 = EDGE_CURVE('',#332522,#332513,#332524,.T.); +#332522 = VERTEX_POINT('',#332523); +#332523 = CARTESIAN_POINT('',(154.475,-99.325,1.51)); +#332524 = LINE('',#332525,#332526); +#332525 = CARTESIAN_POINT('',(154.475,-99.325,1.51)); +#332526 = VECTOR('',#332527,1.); +#332527 = DIRECTION('',(0.,0.,1.)); +#332528 = ORIENTED_EDGE('',*,*,#332529,.F.); +#332529 = EDGE_CURVE('',#332490,#332522,#332530,.T.); +#332530 = CIRCLE('',#332531,0.225000087974); +#332531 = AXIS2_PLACEMENT_3D('',#332532,#332533,#332534); +#332532 = CARTESIAN_POINT('',(154.47499991202,-99.09999991202,1.51)); +#332533 = DIRECTION('',(0.,0.,-1.)); +#332534 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#332535 = CYLINDRICAL_SURFACE('',#332536,0.225000087974); +#332536 = AXIS2_PLACEMENT_3D('',#332537,#332538,#332539); +#332537 = CARTESIAN_POINT('',(154.47499991202,-99.09999991202,1.51)); +#332538 = DIRECTION('',(0.,0.,-1.)); +#332539 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#332540 = ADVANCED_FACE('',(#332541),#332566,.T.); +#332541 = FACE_BOUND('',#332542,.T.); +#332542 = EDGE_LOOP('',(#332543,#332544,#332552,#332560)); +#332543 = ORIENTED_EDGE('',*,*,#332521,.T.); +#332544 = ORIENTED_EDGE('',*,*,#332545,.T.); +#332545 = EDGE_CURVE('',#332513,#332546,#332548,.T.); +#332546 = VERTEX_POINT('',#332547); +#332547 = CARTESIAN_POINT('',(154.025,-99.325,1.55)); +#332548 = LINE('',#332549,#332550); +#332549 = CARTESIAN_POINT('',(154.475,-99.325,1.55)); +#332550 = VECTOR('',#332551,1.); +#332551 = DIRECTION('',(-1.,0.,0.)); +#332552 = ORIENTED_EDGE('',*,*,#332553,.F.); +#332553 = EDGE_CURVE('',#332554,#332546,#332556,.T.); +#332554 = VERTEX_POINT('',#332555); +#332555 = CARTESIAN_POINT('',(154.025,-99.325,1.51)); +#332556 = LINE('',#332557,#332558); +#332557 = CARTESIAN_POINT('',(154.025,-99.325,1.51)); +#332558 = VECTOR('',#332559,1.); +#332559 = DIRECTION('',(0.,0.,1.)); +#332560 = ORIENTED_EDGE('',*,*,#332561,.F.); +#332561 = EDGE_CURVE('',#332522,#332554,#332562,.T.); +#332562 = LINE('',#332563,#332564); +#332563 = CARTESIAN_POINT('',(154.475,-99.325,1.51)); +#332564 = VECTOR('',#332565,1.); +#332565 = DIRECTION('',(-1.,0.,0.)); +#332566 = PLANE('',#332567); +#332567 = AXIS2_PLACEMENT_3D('',#332568,#332569,#332570); +#332568 = CARTESIAN_POINT('',(154.475,-99.325,1.51)); +#332569 = DIRECTION('',(0.,-1.,0.)); +#332570 = DIRECTION('',(-1.,0.,0.)); +#332571 = ADVANCED_FACE('',(#332572),#332599,.T.); +#332572 = FACE_BOUND('',#332573,.T.); +#332573 = EDGE_LOOP('',(#332574,#332575,#332584,#332592)); +#332574 = ORIENTED_EDGE('',*,*,#332553,.T.); +#332575 = ORIENTED_EDGE('',*,*,#332576,.T.); +#332576 = EDGE_CURVE('',#332546,#332577,#332579,.T.); +#332577 = VERTEX_POINT('',#332578); +#332578 = CARTESIAN_POINT('',(153.8,-99.1,1.55)); +#332579 = CIRCLE('',#332580,0.225000087974); +#332580 = AXIS2_PLACEMENT_3D('',#332581,#332582,#332583); +#332581 = CARTESIAN_POINT('',(154.02500008797,-99.09999991202,1.55)); +#332582 = DIRECTION('',(0.,0.,-1.)); +#332583 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#332584 = ORIENTED_EDGE('',*,*,#332585,.F.); +#332585 = EDGE_CURVE('',#332586,#332577,#332588,.T.); +#332586 = VERTEX_POINT('',#332587); +#332587 = CARTESIAN_POINT('',(153.8,-99.1,1.51)); +#332588 = LINE('',#332589,#332590); +#332589 = CARTESIAN_POINT('',(153.8,-99.1,1.51)); +#332590 = VECTOR('',#332591,1.); +#332591 = DIRECTION('',(0.,0.,1.)); +#332592 = ORIENTED_EDGE('',*,*,#332593,.F.); +#332593 = EDGE_CURVE('',#332554,#332586,#332594,.T.); +#332594 = CIRCLE('',#332595,0.225000087974); +#332595 = AXIS2_PLACEMENT_3D('',#332596,#332597,#332598); +#332596 = CARTESIAN_POINT('',(154.02500008797,-99.09999991202,1.51)); +#332597 = DIRECTION('',(0.,0.,-1.)); +#332598 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#332599 = CYLINDRICAL_SURFACE('',#332600,0.225000087974); +#332600 = AXIS2_PLACEMENT_3D('',#332601,#332602,#332603); +#332601 = CARTESIAN_POINT('',(154.02500008797,-99.09999991202,1.51)); +#332602 = DIRECTION('',(0.,0.,-1.)); +#332603 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#332604 = ADVANCED_FACE('',(#332605),#332621,.T.); +#332605 = FACE_BOUND('',#332606,.T.); +#332606 = EDGE_LOOP('',(#332607,#332608,#332614,#332615)); +#332607 = ORIENTED_EDGE('',*,*,#332585,.T.); +#332608 = ORIENTED_EDGE('',*,*,#332609,.T.); +#332609 = EDGE_CURVE('',#332577,#332377,#332610,.T.); +#332610 = LINE('',#332611,#332612); +#332611 = CARTESIAN_POINT('',(153.8,-99.1,1.55)); +#332612 = VECTOR('',#332613,1.); +#332613 = DIRECTION('',(0.,1.,0.)); +#332614 = ORIENTED_EDGE('',*,*,#332374,.F.); +#332615 = ORIENTED_EDGE('',*,*,#332616,.F.); +#332616 = EDGE_CURVE('',#332586,#332375,#332617,.T.); +#332617 = LINE('',#332618,#332619); +#332618 = CARTESIAN_POINT('',(153.8,-99.1,1.51)); +#332619 = VECTOR('',#332620,1.); +#332620 = DIRECTION('',(0.,1.,0.)); +#332621 = PLANE('',#332622); +#332622 = AXIS2_PLACEMENT_3D('',#332623,#332624,#332625); +#332623 = CARTESIAN_POINT('',(153.8,-99.1,1.51)); +#332624 = DIRECTION('',(-1.,0.,0.)); +#332625 = DIRECTION('',(0.,1.,0.)); +#332626 = ADVANCED_FACE('',(#332627),#332637,.F.); +#332627 = FACE_BOUND('',#332628,.T.); +#332628 = EDGE_LOOP('',(#332629,#332630,#332631,#332632,#332633,#332634, + #332635,#332636)); +#332629 = ORIENTED_EDGE('',*,*,#332401,.T.); +#332630 = ORIENTED_EDGE('',*,*,#332433,.T.); +#332631 = ORIENTED_EDGE('',*,*,#332465,.T.); +#332632 = ORIENTED_EDGE('',*,*,#332497,.T.); +#332633 = ORIENTED_EDGE('',*,*,#332529,.T.); +#332634 = ORIENTED_EDGE('',*,*,#332561,.T.); +#332635 = ORIENTED_EDGE('',*,*,#332593,.T.); +#332636 = ORIENTED_EDGE('',*,*,#332616,.T.); +#332637 = PLANE('',#332638); +#332638 = AXIS2_PLACEMENT_3D('',#332639,#332640,#332641); +#332639 = CARTESIAN_POINT('',(0.,0.,1.51)); +#332640 = DIRECTION('',(0.,0.,1.)); +#332641 = DIRECTION('',(1.,0.,-0.)); +#332642 = ADVANCED_FACE('',(#332643),#332653,.T.); +#332643 = FACE_BOUND('',#332644,.F.); +#332644 = EDGE_LOOP('',(#332645,#332646,#332647,#332648,#332649,#332650, + #332651,#332652)); +#332645 = ORIENTED_EDGE('',*,*,#332384,.T.); +#332646 = ORIENTED_EDGE('',*,*,#332417,.T.); +#332647 = ORIENTED_EDGE('',*,*,#332448,.T.); +#332648 = ORIENTED_EDGE('',*,*,#332481,.T.); +#332649 = ORIENTED_EDGE('',*,*,#332512,.T.); +#332650 = ORIENTED_EDGE('',*,*,#332545,.T.); +#332651 = ORIENTED_EDGE('',*,*,#332576,.T.); +#332652 = ORIENTED_EDGE('',*,*,#332609,.T.); +#332653 = PLANE('',#332654); +#332654 = AXIS2_PLACEMENT_3D('',#332655,#332656,#332657); +#332655 = CARTESIAN_POINT('',(0.,0.,1.55)); +#332656 = DIRECTION('',(0.,0.,1.)); +#332657 = DIRECTION('',(1.,0.,-0.)); +#332658 = MANIFOLD_SOLID_BREP('',#332659); +#332659 = CLOSED_SHELL('',(#332660,#332702,#332733,#332766,#332797, + #332830,#332861,#332894,#332916,#332932)); +#332660 = ADVANCED_FACE('',(#332661),#332697,.T.); +#332661 = FACE_BOUND('',#332662,.T.); +#332662 = EDGE_LOOP('',(#332663,#332673,#332682,#332690)); +#332663 = ORIENTED_EDGE('',*,*,#332664,.T.); +#332664 = EDGE_CURVE('',#332665,#332667,#332669,.T.); +#332665 = VERTEX_POINT('',#332666); +#332666 = CARTESIAN_POINT('',(138.6,-152.405,1.51)); +#332667 = VERTEX_POINT('',#332668); +#332668 = CARTESIAN_POINT('',(138.6,-152.405,1.55)); +#332669 = LINE('',#332670,#332671); +#332670 = CARTESIAN_POINT('',(138.6,-152.405,1.51)); +#332671 = VECTOR('',#332672,1.); +#332672 = DIRECTION('',(0.,0.,1.)); +#332673 = ORIENTED_EDGE('',*,*,#332674,.T.); +#332674 = EDGE_CURVE('',#332667,#332675,#332677,.T.); +#332675 = VERTEX_POINT('',#332676); +#332676 = CARTESIAN_POINT('',(138.675,-152.33,1.55)); +#332677 = CIRCLE('',#332678,7.500002932469E-02); +#332678 = AXIS2_PLACEMENT_3D('',#332679,#332680,#332681); +#332679 = CARTESIAN_POINT('',(138.67500002932,-152.4050000293,1.55)); +#332680 = DIRECTION('',(0.,0.,-1.)); +#332681 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332682 = ORIENTED_EDGE('',*,*,#332683,.F.); +#332683 = EDGE_CURVE('',#332684,#332675,#332686,.T.); +#332684 = VERTEX_POINT('',#332685); +#332685 = CARTESIAN_POINT('',(138.675,-152.33,1.51)); +#332686 = LINE('',#332687,#332688); +#332687 = CARTESIAN_POINT('',(138.675,-152.33,1.51)); +#332688 = VECTOR('',#332689,1.); +#332689 = DIRECTION('',(0.,0.,1.)); +#332690 = ORIENTED_EDGE('',*,*,#332691,.F.); +#332691 = EDGE_CURVE('',#332665,#332684,#332692,.T.); +#332692 = CIRCLE('',#332693,7.500002932469E-02); +#332693 = AXIS2_PLACEMENT_3D('',#332694,#332695,#332696); +#332694 = CARTESIAN_POINT('',(138.67500002932,-152.4050000293,1.51)); +#332695 = DIRECTION('',(0.,0.,-1.)); +#332696 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332697 = CYLINDRICAL_SURFACE('',#332698,7.500002932469E-02); +#332698 = AXIS2_PLACEMENT_3D('',#332699,#332700,#332701); +#332699 = CARTESIAN_POINT('',(138.67500002932,-152.4050000293,1.51)); +#332700 = DIRECTION('',(0.,0.,-1.)); +#332701 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332702 = ADVANCED_FACE('',(#332703),#332728,.T.); +#332703 = FACE_BOUND('',#332704,.T.); +#332704 = EDGE_LOOP('',(#332705,#332706,#332714,#332722)); +#332705 = ORIENTED_EDGE('',*,*,#332683,.T.); +#332706 = ORIENTED_EDGE('',*,*,#332707,.T.); +#332707 = EDGE_CURVE('',#332675,#332708,#332710,.T.); +#332708 = VERTEX_POINT('',#332709); +#332709 = CARTESIAN_POINT('',(138.825,-152.33,1.55)); +#332710 = LINE('',#332711,#332712); +#332711 = CARTESIAN_POINT('',(138.675,-152.33,1.55)); +#332712 = VECTOR('',#332713,1.); +#332713 = DIRECTION('',(1.,0.,0.)); +#332714 = ORIENTED_EDGE('',*,*,#332715,.F.); +#332715 = EDGE_CURVE('',#332716,#332708,#332718,.T.); +#332716 = VERTEX_POINT('',#332717); +#332717 = CARTESIAN_POINT('',(138.825,-152.33,1.51)); +#332718 = LINE('',#332719,#332720); +#332719 = CARTESIAN_POINT('',(138.825,-152.33,1.51)); +#332720 = VECTOR('',#332721,1.); +#332721 = DIRECTION('',(0.,0.,1.)); +#332722 = ORIENTED_EDGE('',*,*,#332723,.F.); +#332723 = EDGE_CURVE('',#332684,#332716,#332724,.T.); +#332724 = LINE('',#332725,#332726); +#332725 = CARTESIAN_POINT('',(138.675,-152.33,1.51)); +#332726 = VECTOR('',#332727,1.); +#332727 = DIRECTION('',(1.,0.,0.)); +#332728 = PLANE('',#332729); +#332729 = AXIS2_PLACEMENT_3D('',#332730,#332731,#332732); +#332730 = CARTESIAN_POINT('',(138.675,-152.33,1.51)); +#332731 = DIRECTION('',(0.,1.,0.)); +#332732 = DIRECTION('',(1.,0.,0.)); +#332733 = ADVANCED_FACE('',(#332734),#332761,.T.); +#332734 = FACE_BOUND('',#332735,.T.); +#332735 = EDGE_LOOP('',(#332736,#332737,#332746,#332754)); +#332736 = ORIENTED_EDGE('',*,*,#332715,.T.); +#332737 = ORIENTED_EDGE('',*,*,#332738,.T.); +#332738 = EDGE_CURVE('',#332708,#332739,#332741,.T.); +#332739 = VERTEX_POINT('',#332740); +#332740 = CARTESIAN_POINT('',(138.9,-152.405,1.55)); +#332741 = CIRCLE('',#332742,7.500002932469E-02); +#332742 = AXIS2_PLACEMENT_3D('',#332743,#332744,#332745); +#332743 = CARTESIAN_POINT('',(138.82499997067,-152.4050000293,1.55)); +#332744 = DIRECTION('',(0.,0.,-1.)); +#332745 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332746 = ORIENTED_EDGE('',*,*,#332747,.F.); +#332747 = EDGE_CURVE('',#332748,#332739,#332750,.T.); +#332748 = VERTEX_POINT('',#332749); +#332749 = CARTESIAN_POINT('',(138.9,-152.405,1.51)); +#332750 = LINE('',#332751,#332752); +#332751 = CARTESIAN_POINT('',(138.9,-152.405,1.51)); +#332752 = VECTOR('',#332753,1.); +#332753 = DIRECTION('',(0.,0.,1.)); +#332754 = ORIENTED_EDGE('',*,*,#332755,.F.); +#332755 = EDGE_CURVE('',#332716,#332748,#332756,.T.); +#332756 = CIRCLE('',#332757,7.500002932469E-02); +#332757 = AXIS2_PLACEMENT_3D('',#332758,#332759,#332760); +#332758 = CARTESIAN_POINT('',(138.82499997067,-152.4050000293,1.51)); +#332759 = DIRECTION('',(0.,0.,-1.)); +#332760 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332761 = CYLINDRICAL_SURFACE('',#332762,7.500002932469E-02); +#332762 = AXIS2_PLACEMENT_3D('',#332763,#332764,#332765); +#332763 = CARTESIAN_POINT('',(138.82499997067,-152.4050000293,1.51)); +#332764 = DIRECTION('',(0.,0.,-1.)); +#332765 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#332766 = ADVANCED_FACE('',(#332767),#332792,.T.); +#332767 = FACE_BOUND('',#332768,.T.); +#332768 = EDGE_LOOP('',(#332769,#332770,#332778,#332786)); +#332769 = ORIENTED_EDGE('',*,*,#332747,.T.); +#332770 = ORIENTED_EDGE('',*,*,#332771,.T.); +#332771 = EDGE_CURVE('',#332739,#332772,#332774,.T.); +#332772 = VERTEX_POINT('',#332773); +#332773 = CARTESIAN_POINT('',(138.9,-153.705,1.55)); +#332774 = LINE('',#332775,#332776); +#332775 = CARTESIAN_POINT('',(138.9,-152.405,1.55)); +#332776 = VECTOR('',#332777,1.); +#332777 = DIRECTION('',(0.,-1.,0.)); +#332778 = ORIENTED_EDGE('',*,*,#332779,.F.); +#332779 = EDGE_CURVE('',#332780,#332772,#332782,.T.); +#332780 = VERTEX_POINT('',#332781); +#332781 = CARTESIAN_POINT('',(138.9,-153.705,1.51)); +#332782 = LINE('',#332783,#332784); +#332783 = CARTESIAN_POINT('',(138.9,-153.705,1.51)); +#332784 = VECTOR('',#332785,1.); +#332785 = DIRECTION('',(0.,0.,1.)); +#332786 = ORIENTED_EDGE('',*,*,#332787,.F.); +#332787 = EDGE_CURVE('',#332748,#332780,#332788,.T.); +#332788 = LINE('',#332789,#332790); +#332789 = CARTESIAN_POINT('',(138.9,-152.405,1.51)); +#332790 = VECTOR('',#332791,1.); +#332791 = DIRECTION('',(0.,-1.,0.)); +#332792 = PLANE('',#332793); +#332793 = AXIS2_PLACEMENT_3D('',#332794,#332795,#332796); +#332794 = CARTESIAN_POINT('',(138.9,-152.405,1.51)); +#332795 = DIRECTION('',(1.,0.,-0.)); +#332796 = DIRECTION('',(0.,-1.,0.)); +#332797 = ADVANCED_FACE('',(#332798),#332825,.T.); +#332798 = FACE_BOUND('',#332799,.T.); +#332799 = EDGE_LOOP('',(#332800,#332801,#332810,#332818)); +#332800 = ORIENTED_EDGE('',*,*,#332779,.T.); +#332801 = ORIENTED_EDGE('',*,*,#332802,.T.); +#332802 = EDGE_CURVE('',#332772,#332803,#332805,.T.); +#332803 = VERTEX_POINT('',#332804); +#332804 = CARTESIAN_POINT('',(138.825,-153.78,1.55)); +#332805 = CIRCLE('',#332806,7.500002932469E-02); +#332806 = AXIS2_PLACEMENT_3D('',#332807,#332808,#332809); +#332807 = CARTESIAN_POINT('',(138.82499997067,-153.7049999706,1.55)); +#332808 = DIRECTION('',(0.,0.,-1.)); +#332809 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#332810 = ORIENTED_EDGE('',*,*,#332811,.F.); +#332811 = EDGE_CURVE('',#332812,#332803,#332814,.T.); +#332812 = VERTEX_POINT('',#332813); +#332813 = CARTESIAN_POINT('',(138.825,-153.78,1.51)); +#332814 = LINE('',#332815,#332816); +#332815 = CARTESIAN_POINT('',(138.825,-153.78,1.51)); +#332816 = VECTOR('',#332817,1.); +#332817 = DIRECTION('',(0.,0.,1.)); +#332818 = ORIENTED_EDGE('',*,*,#332819,.F.); +#332819 = EDGE_CURVE('',#332780,#332812,#332820,.T.); +#332820 = CIRCLE('',#332821,7.500002932469E-02); +#332821 = AXIS2_PLACEMENT_3D('',#332822,#332823,#332824); +#332822 = CARTESIAN_POINT('',(138.82499997067,-153.7049999706,1.51)); +#332823 = DIRECTION('',(0.,0.,-1.)); +#332824 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#332825 = CYLINDRICAL_SURFACE('',#332826,7.500002932469E-02); +#332826 = AXIS2_PLACEMENT_3D('',#332827,#332828,#332829); +#332827 = CARTESIAN_POINT('',(138.82499997067,-153.7049999706,1.51)); +#332828 = DIRECTION('',(0.,0.,-1.)); +#332829 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#332830 = ADVANCED_FACE('',(#332831),#332856,.T.); +#332831 = FACE_BOUND('',#332832,.T.); +#332832 = EDGE_LOOP('',(#332833,#332834,#332842,#332850)); +#332833 = ORIENTED_EDGE('',*,*,#332811,.T.); +#332834 = ORIENTED_EDGE('',*,*,#332835,.T.); +#332835 = EDGE_CURVE('',#332803,#332836,#332838,.T.); +#332836 = VERTEX_POINT('',#332837); +#332837 = CARTESIAN_POINT('',(138.675,-153.78,1.55)); +#332838 = LINE('',#332839,#332840); +#332839 = CARTESIAN_POINT('',(138.825,-153.78,1.55)); +#332840 = VECTOR('',#332841,1.); +#332841 = DIRECTION('',(-1.,0.,0.)); +#332842 = ORIENTED_EDGE('',*,*,#332843,.F.); +#332843 = EDGE_CURVE('',#332844,#332836,#332846,.T.); +#332844 = VERTEX_POINT('',#332845); +#332845 = CARTESIAN_POINT('',(138.675,-153.78,1.51)); +#332846 = LINE('',#332847,#332848); +#332847 = CARTESIAN_POINT('',(138.675,-153.78,1.51)); +#332848 = VECTOR('',#332849,1.); +#332849 = DIRECTION('',(0.,0.,1.)); +#332850 = ORIENTED_EDGE('',*,*,#332851,.F.); +#332851 = EDGE_CURVE('',#332812,#332844,#332852,.T.); +#332852 = LINE('',#332853,#332854); +#332853 = CARTESIAN_POINT('',(138.825,-153.78,1.51)); +#332854 = VECTOR('',#332855,1.); +#332855 = DIRECTION('',(-1.,0.,0.)); +#332856 = PLANE('',#332857); +#332857 = AXIS2_PLACEMENT_3D('',#332858,#332859,#332860); +#332858 = CARTESIAN_POINT('',(138.825,-153.78,1.51)); +#332859 = DIRECTION('',(0.,-1.,0.)); +#332860 = DIRECTION('',(-1.,0.,0.)); +#332861 = ADVANCED_FACE('',(#332862),#332889,.T.); +#332862 = FACE_BOUND('',#332863,.T.); +#332863 = EDGE_LOOP('',(#332864,#332865,#332874,#332882)); +#332864 = ORIENTED_EDGE('',*,*,#332843,.T.); +#332865 = ORIENTED_EDGE('',*,*,#332866,.T.); +#332866 = EDGE_CURVE('',#332836,#332867,#332869,.T.); +#332867 = VERTEX_POINT('',#332868); +#332868 = CARTESIAN_POINT('',(138.6,-153.705,1.55)); +#332869 = CIRCLE('',#332870,7.500002932469E-02); +#332870 = AXIS2_PLACEMENT_3D('',#332871,#332872,#332873); +#332871 = CARTESIAN_POINT('',(138.67500002932,-153.7049999706,1.55)); +#332872 = DIRECTION('',(0.,0.,-1.)); +#332873 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332874 = ORIENTED_EDGE('',*,*,#332875,.F.); +#332875 = EDGE_CURVE('',#332876,#332867,#332878,.T.); +#332876 = VERTEX_POINT('',#332877); +#332877 = CARTESIAN_POINT('',(138.6,-153.705,1.51)); +#332878 = LINE('',#332879,#332880); +#332879 = CARTESIAN_POINT('',(138.6,-153.705,1.51)); +#332880 = VECTOR('',#332881,1.); +#332881 = DIRECTION('',(0.,0.,1.)); +#332882 = ORIENTED_EDGE('',*,*,#332883,.F.); +#332883 = EDGE_CURVE('',#332844,#332876,#332884,.T.); +#332884 = CIRCLE('',#332885,7.500002932469E-02); +#332885 = AXIS2_PLACEMENT_3D('',#332886,#332887,#332888); +#332886 = CARTESIAN_POINT('',(138.67500002932,-153.7049999706,1.51)); +#332887 = DIRECTION('',(0.,0.,-1.)); +#332888 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332889 = CYLINDRICAL_SURFACE('',#332890,7.500002932469E-02); +#332890 = AXIS2_PLACEMENT_3D('',#332891,#332892,#332893); +#332891 = CARTESIAN_POINT('',(138.67500002932,-153.7049999706,1.51)); +#332892 = DIRECTION('',(0.,0.,-1.)); +#332893 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#332894 = ADVANCED_FACE('',(#332895),#332911,.T.); +#332895 = FACE_BOUND('',#332896,.T.); +#332896 = EDGE_LOOP('',(#332897,#332898,#332904,#332905)); +#332897 = ORIENTED_EDGE('',*,*,#332875,.T.); +#332898 = ORIENTED_EDGE('',*,*,#332899,.T.); +#332899 = EDGE_CURVE('',#332867,#332667,#332900,.T.); +#332900 = LINE('',#332901,#332902); +#332901 = CARTESIAN_POINT('',(138.6,-153.705,1.55)); +#332902 = VECTOR('',#332903,1.); +#332903 = DIRECTION('',(0.,1.,0.)); +#332904 = ORIENTED_EDGE('',*,*,#332664,.F.); +#332905 = ORIENTED_EDGE('',*,*,#332906,.F.); +#332906 = EDGE_CURVE('',#332876,#332665,#332907,.T.); +#332907 = LINE('',#332908,#332909); +#332908 = CARTESIAN_POINT('',(138.6,-153.705,1.51)); +#332909 = VECTOR('',#332910,1.); +#332910 = DIRECTION('',(0.,1.,0.)); +#332911 = PLANE('',#332912); +#332912 = AXIS2_PLACEMENT_3D('',#332913,#332914,#332915); +#332913 = CARTESIAN_POINT('',(138.6,-153.705,1.51)); +#332914 = DIRECTION('',(-1.,0.,0.)); +#332915 = DIRECTION('',(0.,1.,0.)); +#332916 = ADVANCED_FACE('',(#332917),#332927,.F.); +#332917 = FACE_BOUND('',#332918,.T.); +#332918 = EDGE_LOOP('',(#332919,#332920,#332921,#332922,#332923,#332924, + #332925,#332926)); +#332919 = ORIENTED_EDGE('',*,*,#332691,.T.); +#332920 = ORIENTED_EDGE('',*,*,#332723,.T.); +#332921 = ORIENTED_EDGE('',*,*,#332755,.T.); +#332922 = ORIENTED_EDGE('',*,*,#332787,.T.); +#332923 = ORIENTED_EDGE('',*,*,#332819,.T.); +#332924 = ORIENTED_EDGE('',*,*,#332851,.T.); +#332925 = ORIENTED_EDGE('',*,*,#332883,.T.); +#332926 = ORIENTED_EDGE('',*,*,#332906,.T.); +#332927 = PLANE('',#332928); +#332928 = AXIS2_PLACEMENT_3D('',#332929,#332930,#332931); +#332929 = CARTESIAN_POINT('',(0.,0.,1.51)); +#332930 = DIRECTION('',(0.,0.,1.)); +#332931 = DIRECTION('',(1.,0.,-0.)); +#332932 = ADVANCED_FACE('',(#332933),#332943,.T.); +#332933 = FACE_BOUND('',#332934,.F.); +#332934 = EDGE_LOOP('',(#332935,#332936,#332937,#332938,#332939,#332940, + #332941,#332942)); +#332935 = ORIENTED_EDGE('',*,*,#332674,.T.); +#332936 = ORIENTED_EDGE('',*,*,#332707,.T.); +#332937 = ORIENTED_EDGE('',*,*,#332738,.T.); +#332938 = ORIENTED_EDGE('',*,*,#332771,.T.); +#332939 = ORIENTED_EDGE('',*,*,#332802,.T.); +#332940 = ORIENTED_EDGE('',*,*,#332835,.T.); +#332941 = ORIENTED_EDGE('',*,*,#332866,.T.); +#332942 = ORIENTED_EDGE('',*,*,#332899,.T.); +#332943 = PLANE('',#332944); +#332944 = AXIS2_PLACEMENT_3D('',#332945,#332946,#332947); +#332945 = CARTESIAN_POINT('',(0.,0.,1.55)); +#332946 = DIRECTION('',(0.,0.,1.)); +#332947 = DIRECTION('',(1.,0.,-0.)); +#332948 = MANIFOLD_SOLID_BREP('',#332949); +#332949 = CLOSED_SHELL('',(#332950,#332992,#333023,#333056,#333087, + #333120,#333151,#333184,#333206,#333222)); +#332950 = ADVANCED_FACE('',(#332951),#332987,.T.); +#332951 = FACE_BOUND('',#332952,.T.); +#332952 = EDGE_LOOP('',(#332953,#332963,#332972,#332980)); +#332953 = ORIENTED_EDGE('',*,*,#332954,.T.); +#332954 = EDGE_CURVE('',#332955,#332957,#332959,.T.); +#332955 = VERTEX_POINT('',#332956); +#332956 = CARTESIAN_POINT('',(135.6,-152.405,1.51)); +#332957 = VERTEX_POINT('',#332958); +#332958 = CARTESIAN_POINT('',(135.6,-152.405,1.55)); +#332959 = LINE('',#332960,#332961); +#332960 = CARTESIAN_POINT('',(135.6,-152.405,1.51)); +#332961 = VECTOR('',#332962,1.); +#332962 = DIRECTION('',(0.,0.,1.)); +#332963 = ORIENTED_EDGE('',*,*,#332964,.T.); +#332964 = EDGE_CURVE('',#332957,#332965,#332967,.T.); +#332965 = VERTEX_POINT('',#332966); +#332966 = CARTESIAN_POINT('',(135.675,-152.33,1.55)); +#332967 = CIRCLE('',#332968,7.500002932469E-02); +#332968 = AXIS2_PLACEMENT_3D('',#332969,#332970,#332971); +#332969 = CARTESIAN_POINT('',(135.67500002932,-152.4050000293,1.55)); +#332970 = DIRECTION('',(0.,0.,-1.)); +#332971 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332972 = ORIENTED_EDGE('',*,*,#332973,.F.); +#332973 = EDGE_CURVE('',#332974,#332965,#332976,.T.); +#332974 = VERTEX_POINT('',#332975); +#332975 = CARTESIAN_POINT('',(135.675,-152.33,1.51)); +#332976 = LINE('',#332977,#332978); +#332977 = CARTESIAN_POINT('',(135.675,-152.33,1.51)); +#332978 = VECTOR('',#332979,1.); +#332979 = DIRECTION('',(0.,0.,1.)); +#332980 = ORIENTED_EDGE('',*,*,#332981,.F.); +#332981 = EDGE_CURVE('',#332955,#332974,#332982,.T.); +#332982 = CIRCLE('',#332983,7.500002932469E-02); +#332983 = AXIS2_PLACEMENT_3D('',#332984,#332985,#332986); +#332984 = CARTESIAN_POINT('',(135.67500002932,-152.4050000293,1.51)); +#332985 = DIRECTION('',(0.,0.,-1.)); +#332986 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332987 = CYLINDRICAL_SURFACE('',#332988,7.500002932469E-02); +#332988 = AXIS2_PLACEMENT_3D('',#332989,#332990,#332991); +#332989 = CARTESIAN_POINT('',(135.67500002932,-152.4050000293,1.51)); +#332990 = DIRECTION('',(0.,0.,-1.)); +#332991 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#332992 = ADVANCED_FACE('',(#332993),#333018,.T.); +#332993 = FACE_BOUND('',#332994,.T.); +#332994 = EDGE_LOOP('',(#332995,#332996,#333004,#333012)); +#332995 = ORIENTED_EDGE('',*,*,#332973,.T.); +#332996 = ORIENTED_EDGE('',*,*,#332997,.T.); +#332997 = EDGE_CURVE('',#332965,#332998,#333000,.T.); +#332998 = VERTEX_POINT('',#332999); +#332999 = CARTESIAN_POINT('',(135.825,-152.33,1.55)); +#333000 = LINE('',#333001,#333002); +#333001 = CARTESIAN_POINT('',(135.675,-152.33,1.55)); +#333002 = VECTOR('',#333003,1.); +#333003 = DIRECTION('',(1.,0.,0.)); +#333004 = ORIENTED_EDGE('',*,*,#333005,.F.); +#333005 = EDGE_CURVE('',#333006,#332998,#333008,.T.); +#333006 = VERTEX_POINT('',#333007); +#333007 = CARTESIAN_POINT('',(135.825,-152.33,1.51)); +#333008 = LINE('',#333009,#333010); +#333009 = CARTESIAN_POINT('',(135.825,-152.33,1.51)); +#333010 = VECTOR('',#333011,1.); +#333011 = DIRECTION('',(0.,0.,1.)); +#333012 = ORIENTED_EDGE('',*,*,#333013,.F.); +#333013 = EDGE_CURVE('',#332974,#333006,#333014,.T.); +#333014 = LINE('',#333015,#333016); +#333015 = CARTESIAN_POINT('',(135.675,-152.33,1.51)); +#333016 = VECTOR('',#333017,1.); +#333017 = DIRECTION('',(1.,0.,0.)); +#333018 = PLANE('',#333019); +#333019 = AXIS2_PLACEMENT_3D('',#333020,#333021,#333022); +#333020 = CARTESIAN_POINT('',(135.675,-152.33,1.51)); +#333021 = DIRECTION('',(0.,1.,0.)); +#333022 = DIRECTION('',(1.,0.,0.)); +#333023 = ADVANCED_FACE('',(#333024),#333051,.T.); +#333024 = FACE_BOUND('',#333025,.T.); +#333025 = EDGE_LOOP('',(#333026,#333027,#333036,#333044)); +#333026 = ORIENTED_EDGE('',*,*,#333005,.T.); +#333027 = ORIENTED_EDGE('',*,*,#333028,.T.); +#333028 = EDGE_CURVE('',#332998,#333029,#333031,.T.); +#333029 = VERTEX_POINT('',#333030); +#333030 = CARTESIAN_POINT('',(135.9,-152.405,1.55)); +#333031 = CIRCLE('',#333032,7.500002932469E-02); +#333032 = AXIS2_PLACEMENT_3D('',#333033,#333034,#333035); +#333033 = CARTESIAN_POINT('',(135.82499997067,-152.4050000293,1.55)); +#333034 = DIRECTION('',(0.,0.,-1.)); +#333035 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#333036 = ORIENTED_EDGE('',*,*,#333037,.F.); +#333037 = EDGE_CURVE('',#333038,#333029,#333040,.T.); +#333038 = VERTEX_POINT('',#333039); +#333039 = CARTESIAN_POINT('',(135.9,-152.405,1.51)); +#333040 = LINE('',#333041,#333042); +#333041 = CARTESIAN_POINT('',(135.9,-152.405,1.51)); +#333042 = VECTOR('',#333043,1.); +#333043 = DIRECTION('',(0.,0.,1.)); +#333044 = ORIENTED_EDGE('',*,*,#333045,.F.); +#333045 = EDGE_CURVE('',#333006,#333038,#333046,.T.); +#333046 = CIRCLE('',#333047,7.500002932469E-02); +#333047 = AXIS2_PLACEMENT_3D('',#333048,#333049,#333050); +#333048 = CARTESIAN_POINT('',(135.82499997067,-152.4050000293,1.51)); +#333049 = DIRECTION('',(0.,0.,-1.)); +#333050 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#333051 = CYLINDRICAL_SURFACE('',#333052,7.500002932469E-02); +#333052 = AXIS2_PLACEMENT_3D('',#333053,#333054,#333055); +#333053 = CARTESIAN_POINT('',(135.82499997067,-152.4050000293,1.51)); +#333054 = DIRECTION('',(0.,0.,-1.)); +#333055 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#333056 = ADVANCED_FACE('',(#333057),#333082,.T.); +#333057 = FACE_BOUND('',#333058,.T.); +#333058 = EDGE_LOOP('',(#333059,#333060,#333068,#333076)); +#333059 = ORIENTED_EDGE('',*,*,#333037,.T.); +#333060 = ORIENTED_EDGE('',*,*,#333061,.T.); +#333061 = EDGE_CURVE('',#333029,#333062,#333064,.T.); +#333062 = VERTEX_POINT('',#333063); +#333063 = CARTESIAN_POINT('',(135.9,-153.705,1.55)); +#333064 = LINE('',#333065,#333066); +#333065 = CARTESIAN_POINT('',(135.9,-152.405,1.55)); +#333066 = VECTOR('',#333067,1.); +#333067 = DIRECTION('',(0.,-1.,0.)); +#333068 = ORIENTED_EDGE('',*,*,#333069,.F.); +#333069 = EDGE_CURVE('',#333070,#333062,#333072,.T.); +#333070 = VERTEX_POINT('',#333071); +#333071 = CARTESIAN_POINT('',(135.9,-153.705,1.51)); +#333072 = LINE('',#333073,#333074); +#333073 = CARTESIAN_POINT('',(135.9,-153.705,1.51)); +#333074 = VECTOR('',#333075,1.); +#333075 = DIRECTION('',(0.,0.,1.)); +#333076 = ORIENTED_EDGE('',*,*,#333077,.F.); +#333077 = EDGE_CURVE('',#333038,#333070,#333078,.T.); +#333078 = LINE('',#333079,#333080); +#333079 = CARTESIAN_POINT('',(135.9,-152.405,1.51)); +#333080 = VECTOR('',#333081,1.); +#333081 = DIRECTION('',(0.,-1.,0.)); +#333082 = PLANE('',#333083); +#333083 = AXIS2_PLACEMENT_3D('',#333084,#333085,#333086); +#333084 = CARTESIAN_POINT('',(135.9,-152.405,1.51)); +#333085 = DIRECTION('',(1.,0.,-0.)); +#333086 = DIRECTION('',(0.,-1.,0.)); +#333087 = ADVANCED_FACE('',(#333088),#333115,.T.); +#333088 = FACE_BOUND('',#333089,.T.); +#333089 = EDGE_LOOP('',(#333090,#333091,#333100,#333108)); +#333090 = ORIENTED_EDGE('',*,*,#333069,.T.); +#333091 = ORIENTED_EDGE('',*,*,#333092,.T.); +#333092 = EDGE_CURVE('',#333062,#333093,#333095,.T.); +#333093 = VERTEX_POINT('',#333094); +#333094 = CARTESIAN_POINT('',(135.825,-153.78,1.55)); +#333095 = CIRCLE('',#333096,7.500002932469E-02); +#333096 = AXIS2_PLACEMENT_3D('',#333097,#333098,#333099); +#333097 = CARTESIAN_POINT('',(135.82499997067,-153.7049999706,1.55)); +#333098 = DIRECTION('',(0.,0.,-1.)); +#333099 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#333100 = ORIENTED_EDGE('',*,*,#333101,.F.); +#333101 = EDGE_CURVE('',#333102,#333093,#333104,.T.); +#333102 = VERTEX_POINT('',#333103); +#333103 = CARTESIAN_POINT('',(135.825,-153.78,1.51)); +#333104 = LINE('',#333105,#333106); +#333105 = CARTESIAN_POINT('',(135.825,-153.78,1.51)); +#333106 = VECTOR('',#333107,1.); +#333107 = DIRECTION('',(0.,0.,1.)); +#333108 = ORIENTED_EDGE('',*,*,#333109,.F.); +#333109 = EDGE_CURVE('',#333070,#333102,#333110,.T.); +#333110 = CIRCLE('',#333111,7.500002932469E-02); +#333111 = AXIS2_PLACEMENT_3D('',#333112,#333113,#333114); +#333112 = CARTESIAN_POINT('',(135.82499997067,-153.7049999706,1.51)); +#333113 = DIRECTION('',(0.,0.,-1.)); +#333114 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#333115 = CYLINDRICAL_SURFACE('',#333116,7.500002932469E-02); +#333116 = AXIS2_PLACEMENT_3D('',#333117,#333118,#333119); +#333117 = CARTESIAN_POINT('',(135.82499997067,-153.7049999706,1.51)); +#333118 = DIRECTION('',(0.,0.,-1.)); +#333119 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#333120 = ADVANCED_FACE('',(#333121),#333146,.T.); +#333121 = FACE_BOUND('',#333122,.T.); +#333122 = EDGE_LOOP('',(#333123,#333124,#333132,#333140)); +#333123 = ORIENTED_EDGE('',*,*,#333101,.T.); +#333124 = ORIENTED_EDGE('',*,*,#333125,.T.); +#333125 = EDGE_CURVE('',#333093,#333126,#333128,.T.); +#333126 = VERTEX_POINT('',#333127); +#333127 = CARTESIAN_POINT('',(135.675,-153.78,1.55)); +#333128 = LINE('',#333129,#333130); +#333129 = CARTESIAN_POINT('',(135.825,-153.78,1.55)); +#333130 = VECTOR('',#333131,1.); +#333131 = DIRECTION('',(-1.,0.,0.)); +#333132 = ORIENTED_EDGE('',*,*,#333133,.F.); +#333133 = EDGE_CURVE('',#333134,#333126,#333136,.T.); +#333134 = VERTEX_POINT('',#333135); +#333135 = CARTESIAN_POINT('',(135.675,-153.78,1.51)); +#333136 = LINE('',#333137,#333138); +#333137 = CARTESIAN_POINT('',(135.675,-153.78,1.51)); +#333138 = VECTOR('',#333139,1.); +#333139 = DIRECTION('',(0.,0.,1.)); +#333140 = ORIENTED_EDGE('',*,*,#333141,.F.); +#333141 = EDGE_CURVE('',#333102,#333134,#333142,.T.); +#333142 = LINE('',#333143,#333144); +#333143 = CARTESIAN_POINT('',(135.825,-153.78,1.51)); +#333144 = VECTOR('',#333145,1.); +#333145 = DIRECTION('',(-1.,0.,0.)); +#333146 = PLANE('',#333147); +#333147 = AXIS2_PLACEMENT_3D('',#333148,#333149,#333150); +#333148 = CARTESIAN_POINT('',(135.825,-153.78,1.51)); +#333149 = DIRECTION('',(0.,-1.,0.)); +#333150 = DIRECTION('',(-1.,0.,0.)); +#333151 = ADVANCED_FACE('',(#333152),#333179,.T.); +#333152 = FACE_BOUND('',#333153,.T.); +#333153 = EDGE_LOOP('',(#333154,#333155,#333164,#333172)); +#333154 = ORIENTED_EDGE('',*,*,#333133,.T.); +#333155 = ORIENTED_EDGE('',*,*,#333156,.T.); +#333156 = EDGE_CURVE('',#333126,#333157,#333159,.T.); +#333157 = VERTEX_POINT('',#333158); +#333158 = CARTESIAN_POINT('',(135.6,-153.705,1.55)); +#333159 = CIRCLE('',#333160,7.500002932469E-02); +#333160 = AXIS2_PLACEMENT_3D('',#333161,#333162,#333163); +#333161 = CARTESIAN_POINT('',(135.67500002932,-153.7049999706,1.55)); +#333162 = DIRECTION('',(0.,0.,-1.)); +#333163 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#333164 = ORIENTED_EDGE('',*,*,#333165,.F.); +#333165 = EDGE_CURVE('',#333166,#333157,#333168,.T.); +#333166 = VERTEX_POINT('',#333167); +#333167 = CARTESIAN_POINT('',(135.6,-153.705,1.51)); +#333168 = LINE('',#333169,#333170); +#333169 = CARTESIAN_POINT('',(135.6,-153.705,1.51)); +#333170 = VECTOR('',#333171,1.); +#333171 = DIRECTION('',(0.,0.,1.)); +#333172 = ORIENTED_EDGE('',*,*,#333173,.F.); +#333173 = EDGE_CURVE('',#333134,#333166,#333174,.T.); +#333174 = CIRCLE('',#333175,7.500002932469E-02); +#333175 = AXIS2_PLACEMENT_3D('',#333176,#333177,#333178); +#333176 = CARTESIAN_POINT('',(135.67500002932,-153.7049999706,1.51)); +#333177 = DIRECTION('',(0.,0.,-1.)); +#333178 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#333179 = CYLINDRICAL_SURFACE('',#333180,7.500002932469E-02); +#333180 = AXIS2_PLACEMENT_3D('',#333181,#333182,#333183); +#333181 = CARTESIAN_POINT('',(135.67500002932,-153.7049999706,1.51)); +#333182 = DIRECTION('',(0.,0.,-1.)); +#333183 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#333184 = ADVANCED_FACE('',(#333185),#333201,.T.); +#333185 = FACE_BOUND('',#333186,.T.); +#333186 = EDGE_LOOP('',(#333187,#333188,#333194,#333195)); +#333187 = ORIENTED_EDGE('',*,*,#333165,.T.); +#333188 = ORIENTED_EDGE('',*,*,#333189,.T.); +#333189 = EDGE_CURVE('',#333157,#332957,#333190,.T.); +#333190 = LINE('',#333191,#333192); +#333191 = CARTESIAN_POINT('',(135.6,-153.705,1.55)); +#333192 = VECTOR('',#333193,1.); +#333193 = DIRECTION('',(0.,1.,0.)); +#333194 = ORIENTED_EDGE('',*,*,#332954,.F.); +#333195 = ORIENTED_EDGE('',*,*,#333196,.F.); +#333196 = EDGE_CURVE('',#333166,#332955,#333197,.T.); +#333197 = LINE('',#333198,#333199); +#333198 = CARTESIAN_POINT('',(135.6,-153.705,1.51)); +#333199 = VECTOR('',#333200,1.); +#333200 = DIRECTION('',(0.,1.,0.)); +#333201 = PLANE('',#333202); +#333202 = AXIS2_PLACEMENT_3D('',#333203,#333204,#333205); +#333203 = CARTESIAN_POINT('',(135.6,-153.705,1.51)); +#333204 = DIRECTION('',(-1.,0.,0.)); +#333205 = DIRECTION('',(0.,1.,0.)); +#333206 = ADVANCED_FACE('',(#333207),#333217,.F.); +#333207 = FACE_BOUND('',#333208,.T.); +#333208 = EDGE_LOOP('',(#333209,#333210,#333211,#333212,#333213,#333214, + #333215,#333216)); +#333209 = ORIENTED_EDGE('',*,*,#332981,.T.); +#333210 = ORIENTED_EDGE('',*,*,#333013,.T.); +#333211 = ORIENTED_EDGE('',*,*,#333045,.T.); +#333212 = ORIENTED_EDGE('',*,*,#333077,.T.); +#333213 = ORIENTED_EDGE('',*,*,#333109,.T.); +#333214 = ORIENTED_EDGE('',*,*,#333141,.T.); +#333215 = ORIENTED_EDGE('',*,*,#333173,.T.); +#333216 = ORIENTED_EDGE('',*,*,#333196,.T.); +#333217 = PLANE('',#333218); +#333218 = AXIS2_PLACEMENT_3D('',#333219,#333220,#333221); +#333219 = CARTESIAN_POINT('',(0.,0.,1.51)); +#333220 = DIRECTION('',(0.,0.,1.)); +#333221 = DIRECTION('',(1.,0.,-0.)); +#333222 = ADVANCED_FACE('',(#333223),#333233,.T.); +#333223 = FACE_BOUND('',#333224,.F.); +#333224 = EDGE_LOOP('',(#333225,#333226,#333227,#333228,#333229,#333230, + #333231,#333232)); +#333225 = ORIENTED_EDGE('',*,*,#332964,.T.); +#333226 = ORIENTED_EDGE('',*,*,#332997,.T.); +#333227 = ORIENTED_EDGE('',*,*,#333028,.T.); +#333228 = ORIENTED_EDGE('',*,*,#333061,.T.); +#333229 = ORIENTED_EDGE('',*,*,#333092,.T.); +#333230 = ORIENTED_EDGE('',*,*,#333125,.T.); +#333231 = ORIENTED_EDGE('',*,*,#333156,.T.); +#333232 = ORIENTED_EDGE('',*,*,#333189,.T.); +#333233 = PLANE('',#333234); +#333234 = AXIS2_PLACEMENT_3D('',#333235,#333236,#333237); +#333235 = CARTESIAN_POINT('',(0.,0.,1.55)); +#333236 = DIRECTION('',(0.,0.,1.)); +#333237 = DIRECTION('',(1.,0.,-0.)); +#333238 = MANIFOLD_SOLID_BREP('',#333239); +#333239 = CLOSED_SHELL('',(#333240,#333273,#333293,#333313)); +#333240 = ADVANCED_FACE('',(#333241),#333268,.T.); +#333241 = FACE_BOUND('',#333242,.F.); +#333242 = EDGE_LOOP('',(#333243,#333253,#333260,#333261)); +#333243 = ORIENTED_EDGE('',*,*,#333244,.T.); +#333244 = EDGE_CURVE('',#333245,#333247,#333249,.T.); +#333245 = VERTEX_POINT('',#333246); +#333246 = CARTESIAN_POINT('',(132.45,-90.25,1.51)); +#333247 = VERTEX_POINT('',#333248); +#333248 = CARTESIAN_POINT('',(132.45,-90.25,1.55)); +#333249 = LINE('',#333250,#333251); +#333250 = CARTESIAN_POINT('',(132.45,-90.25,1.51)); +#333251 = VECTOR('',#333252,1.); +#333252 = DIRECTION('',(0.,0.,1.)); +#333253 = ORIENTED_EDGE('',*,*,#333254,.T.); +#333254 = EDGE_CURVE('',#333247,#333247,#333255,.T.); +#333255 = CIRCLE('',#333256,1.275); +#333256 = AXIS2_PLACEMENT_3D('',#333257,#333258,#333259); +#333257 = CARTESIAN_POINT('',(131.175,-90.25,1.55)); +#333258 = DIRECTION('',(0.,0.,1.)); +#333259 = DIRECTION('',(1.,0.,-0.)); +#333260 = ORIENTED_EDGE('',*,*,#333244,.F.); +#333261 = ORIENTED_EDGE('',*,*,#333262,.F.); +#333262 = EDGE_CURVE('',#333245,#333245,#333263,.T.); +#333263 = CIRCLE('',#333264,1.275); +#333264 = AXIS2_PLACEMENT_3D('',#333265,#333266,#333267); +#333265 = CARTESIAN_POINT('',(131.175,-90.25,1.51)); +#333266 = DIRECTION('',(0.,0.,1.)); +#333267 = DIRECTION('',(1.,0.,-0.)); +#333268 = CYLINDRICAL_SURFACE('',#333269,1.275); +#333269 = AXIS2_PLACEMENT_3D('',#333270,#333271,#333272); +#333270 = CARTESIAN_POINT('',(131.175,-90.25,1.51)); +#333271 = DIRECTION('',(-0.,-0.,-1.)); +#333272 = DIRECTION('',(1.,0.,-0.)); +#333273 = ADVANCED_FACE('',(#333274,#333277),#333288,.F.); +#333274 = FACE_BOUND('',#333275,.F.); +#333275 = EDGE_LOOP('',(#333276)); +#333276 = ORIENTED_EDGE('',*,*,#333262,.T.); +#333277 = FACE_BOUND('',#333278,.F.); +#333278 = EDGE_LOOP('',(#333279)); +#333279 = ORIENTED_EDGE('',*,*,#333280,.T.); +#333280 = EDGE_CURVE('',#333281,#333281,#333283,.T.); +#333281 = VERTEX_POINT('',#333282); +#333282 = CARTESIAN_POINT('',(131.175,-91.,1.51)); +#333283 = CIRCLE('',#333284,0.75); +#333284 = AXIS2_PLACEMENT_3D('',#333285,#333286,#333287); +#333285 = CARTESIAN_POINT('',(131.175,-90.25,1.51)); +#333286 = DIRECTION('',(-0.,0.,-1.)); +#333287 = DIRECTION('',(-0.,-1.,0.)); +#333288 = PLANE('',#333289); +#333289 = AXIS2_PLACEMENT_3D('',#333290,#333291,#333292); +#333290 = CARTESIAN_POINT('',(0.,0.,1.51)); +#333291 = DIRECTION('',(0.,0.,1.)); +#333292 = DIRECTION('',(1.,0.,-0.)); +#333293 = ADVANCED_FACE('',(#333294,#333297),#333308,.T.); +#333294 = FACE_BOUND('',#333295,.T.); +#333295 = EDGE_LOOP('',(#333296)); +#333296 = ORIENTED_EDGE('',*,*,#333254,.T.); +#333297 = FACE_BOUND('',#333298,.T.); +#333298 = EDGE_LOOP('',(#333299)); +#333299 = ORIENTED_EDGE('',*,*,#333300,.T.); +#333300 = EDGE_CURVE('',#333301,#333301,#333303,.T.); +#333301 = VERTEX_POINT('',#333302); +#333302 = CARTESIAN_POINT('',(131.175,-91.,1.55)); +#333303 = CIRCLE('',#333304,0.75); +#333304 = AXIS2_PLACEMENT_3D('',#333305,#333306,#333307); +#333305 = CARTESIAN_POINT('',(131.175,-90.25,1.55)); +#333306 = DIRECTION('',(-0.,0.,-1.)); +#333307 = DIRECTION('',(-0.,-1.,0.)); +#333308 = PLANE('',#333309); +#333309 = AXIS2_PLACEMENT_3D('',#333310,#333311,#333312); +#333310 = CARTESIAN_POINT('',(0.,0.,1.55)); +#333311 = DIRECTION('',(0.,0.,1.)); +#333312 = DIRECTION('',(1.,0.,-0.)); +#333313 = ADVANCED_FACE('',(#333314),#333325,.F.); +#333314 = FACE_BOUND('',#333315,.T.); +#333315 = EDGE_LOOP('',(#333316,#333317,#333323,#333324)); +#333316 = ORIENTED_EDGE('',*,*,#333280,.T.); +#333317 = ORIENTED_EDGE('',*,*,#333318,.T.); +#333318 = EDGE_CURVE('',#333281,#333301,#333319,.T.); +#333319 = LINE('',#333320,#333321); +#333320 = CARTESIAN_POINT('',(131.175,-91.,-4.6E-02)); +#333321 = VECTOR('',#333322,1.); +#333322 = DIRECTION('',(0.,0.,1.)); +#333323 = ORIENTED_EDGE('',*,*,#333300,.F.); +#333324 = ORIENTED_EDGE('',*,*,#333318,.F.); +#333325 = CYLINDRICAL_SURFACE('',#333326,0.75); +#333326 = AXIS2_PLACEMENT_3D('',#333327,#333328,#333329); +#333327 = CARTESIAN_POINT('',(131.175,-90.25,-4.6E-02)); +#333328 = DIRECTION('',(-0.,-0.,-1.)); +#333329 = DIRECTION('',(-0.,-1.,0.)); +#333330 = MANIFOLD_SOLID_BREP('',#333331); +#333331 = CLOSED_SHELL('',(#333332,#333365,#333385,#333405)); +#333332 = ADVANCED_FACE('',(#333333),#333360,.T.); +#333333 = FACE_BOUND('',#333334,.T.); +#333334 = EDGE_LOOP('',(#333335,#333345,#333352,#333353)); +#333335 = ORIENTED_EDGE('',*,*,#333336,.T.); +#333336 = EDGE_CURVE('',#333337,#333339,#333341,.T.); +#333337 = VERTEX_POINT('',#333338); +#333338 = CARTESIAN_POINT('',(132.45,-90.25,0.)); +#333339 = VERTEX_POINT('',#333340); +#333340 = CARTESIAN_POINT('',(132.45,-90.25,-4.E-02)); +#333341 = LINE('',#333342,#333343); +#333342 = CARTESIAN_POINT('',(132.45,-90.25,0.)); +#333343 = VECTOR('',#333344,1.); +#333344 = DIRECTION('',(0.,0.,-1.)); +#333345 = ORIENTED_EDGE('',*,*,#333346,.T.); +#333346 = EDGE_CURVE('',#333339,#333339,#333347,.T.); +#333347 = CIRCLE('',#333348,1.275); +#333348 = AXIS2_PLACEMENT_3D('',#333349,#333350,#333351); +#333349 = CARTESIAN_POINT('',(131.175,-90.25,-4.E-02)); +#333350 = DIRECTION('',(0.,0.,1.)); +#333351 = DIRECTION('',(1.,0.,-0.)); +#333352 = ORIENTED_EDGE('',*,*,#333336,.F.); +#333353 = ORIENTED_EDGE('',*,*,#333354,.F.); +#333354 = EDGE_CURVE('',#333337,#333337,#333355,.T.); +#333355 = CIRCLE('',#333356,1.275); +#333356 = AXIS2_PLACEMENT_3D('',#333357,#333358,#333359); +#333357 = CARTESIAN_POINT('',(131.175,-90.25,0.)); +#333358 = DIRECTION('',(0.,0.,1.)); +#333359 = DIRECTION('',(1.,0.,-0.)); +#333360 = CYLINDRICAL_SURFACE('',#333361,1.275); +#333361 = AXIS2_PLACEMENT_3D('',#333362,#333363,#333364); +#333362 = CARTESIAN_POINT('',(131.175,-90.25,0.)); +#333363 = DIRECTION('',(0.,0.,1.)); +#333364 = DIRECTION('',(1.,0.,-0.)); +#333365 = ADVANCED_FACE('',(#333366,#333369),#333380,.F.); +#333366 = FACE_BOUND('',#333367,.F.); +#333367 = EDGE_LOOP('',(#333368)); +#333368 = ORIENTED_EDGE('',*,*,#333354,.F.); +#333369 = FACE_BOUND('',#333370,.F.); +#333370 = EDGE_LOOP('',(#333371)); +#333371 = ORIENTED_EDGE('',*,*,#333372,.F.); +#333372 = EDGE_CURVE('',#333373,#333373,#333375,.T.); +#333373 = VERTEX_POINT('',#333374); +#333374 = CARTESIAN_POINT('',(131.175,-91.,0.)); +#333375 = CIRCLE('',#333376,0.75); +#333376 = AXIS2_PLACEMENT_3D('',#333377,#333378,#333379); +#333377 = CARTESIAN_POINT('',(131.175,-90.25,0.)); +#333378 = DIRECTION('',(-0.,0.,-1.)); +#333379 = DIRECTION('',(-0.,-1.,0.)); +#333380 = PLANE('',#333381); +#333381 = AXIS2_PLACEMENT_3D('',#333382,#333383,#333384); +#333382 = CARTESIAN_POINT('',(0.,0.,0.)); +#333383 = DIRECTION('',(-0.,-0.,-1.)); +#333384 = DIRECTION('',(-1.,0.,0.)); +#333385 = ADVANCED_FACE('',(#333386,#333389),#333400,.T.); +#333386 = FACE_BOUND('',#333387,.T.); +#333387 = EDGE_LOOP('',(#333388)); +#333388 = ORIENTED_EDGE('',*,*,#333346,.F.); +#333389 = FACE_BOUND('',#333390,.T.); +#333390 = EDGE_LOOP('',(#333391)); +#333391 = ORIENTED_EDGE('',*,*,#333392,.F.); +#333392 = EDGE_CURVE('',#333393,#333393,#333395,.T.); +#333393 = VERTEX_POINT('',#333394); +#333394 = CARTESIAN_POINT('',(131.175,-91.,-4.E-02)); +#333395 = CIRCLE('',#333396,0.75); +#333396 = AXIS2_PLACEMENT_3D('',#333397,#333398,#333399); +#333397 = CARTESIAN_POINT('',(131.175,-90.25,-4.E-02)); +#333398 = DIRECTION('',(-0.,0.,-1.)); +#333399 = DIRECTION('',(-0.,-1.,0.)); +#333400 = PLANE('',#333401); +#333401 = AXIS2_PLACEMENT_3D('',#333402,#333403,#333404); +#333402 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#333403 = DIRECTION('',(-0.,-0.,-1.)); +#333404 = DIRECTION('',(-1.,0.,0.)); +#333405 = ADVANCED_FACE('',(#333406),#333417,.F.); +#333406 = FACE_BOUND('',#333407,.T.); +#333407 = EDGE_LOOP('',(#333408,#333409,#333415,#333416)); +#333408 = ORIENTED_EDGE('',*,*,#333392,.T.); +#333409 = ORIENTED_EDGE('',*,*,#333410,.T.); +#333410 = EDGE_CURVE('',#333393,#333373,#333411,.T.); +#333411 = LINE('',#333412,#333413); +#333412 = CARTESIAN_POINT('',(131.175,-91.,-4.6E-02)); +#333413 = VECTOR('',#333414,1.); +#333414 = DIRECTION('',(0.,0.,1.)); +#333415 = ORIENTED_EDGE('',*,*,#333372,.F.); +#333416 = ORIENTED_EDGE('',*,*,#333410,.F.); +#333417 = CYLINDRICAL_SURFACE('',#333418,0.75); +#333418 = AXIS2_PLACEMENT_3D('',#333419,#333420,#333421); +#333419 = CARTESIAN_POINT('',(131.175,-90.25,-4.6E-02)); +#333420 = DIRECTION('',(-0.,-0.,-1.)); +#333421 = DIRECTION('',(-0.,-1.,0.)); +#333422 = MANIFOLD_SOLID_BREP('',#333423); +#333423 = CLOSED_SHELL('',(#333424,#333457,#333477,#333497)); +#333424 = ADVANCED_FACE('',(#333425),#333452,.T.); +#333425 = FACE_BOUND('',#333426,.F.); +#333426 = EDGE_LOOP('',(#333427,#333437,#333444,#333445)); +#333427 = ORIENTED_EDGE('',*,*,#333428,.T.); +#333428 = EDGE_CURVE('',#333429,#333431,#333433,.T.); +#333429 = VERTEX_POINT('',#333430); +#333430 = CARTESIAN_POINT('',(131.175,-91.025,-4.E-02)); +#333431 = VERTEX_POINT('',#333432); +#333432 = CARTESIAN_POINT('',(131.175,-91.025,1.55)); +#333433 = LINE('',#333434,#333435); +#333434 = CARTESIAN_POINT('',(131.175,-91.025,-4.E-02)); +#333435 = VECTOR('',#333436,1.); +#333436 = DIRECTION('',(0.,0.,1.)); +#333437 = ORIENTED_EDGE('',*,*,#333438,.T.); +#333438 = EDGE_CURVE('',#333431,#333431,#333439,.T.); +#333439 = CIRCLE('',#333440,0.775); +#333440 = AXIS2_PLACEMENT_3D('',#333441,#333442,#333443); +#333441 = CARTESIAN_POINT('',(131.175,-90.25,1.55)); +#333442 = DIRECTION('',(0.,0.,1.)); +#333443 = DIRECTION('',(-0.,-1.,0.)); +#333444 = ORIENTED_EDGE('',*,*,#333428,.F.); +#333445 = ORIENTED_EDGE('',*,*,#333446,.F.); +#333446 = EDGE_CURVE('',#333429,#333429,#333447,.T.); +#333447 = CIRCLE('',#333448,0.775); +#333448 = AXIS2_PLACEMENT_3D('',#333449,#333450,#333451); +#333449 = CARTESIAN_POINT('',(131.175,-90.25,-4.E-02)); +#333450 = DIRECTION('',(0.,0.,1.)); +#333451 = DIRECTION('',(-0.,-1.,0.)); +#333452 = CYLINDRICAL_SURFACE('',#333453,0.775); +#333453 = AXIS2_PLACEMENT_3D('',#333454,#333455,#333456); +#333454 = CARTESIAN_POINT('',(131.175,-90.25,-4.E-02)); +#333455 = DIRECTION('',(-0.,-0.,-1.)); +#333456 = DIRECTION('',(-0.,-1.,0.)); +#333457 = ADVANCED_FACE('',(#333458,#333461),#333472,.F.); +#333458 = FACE_BOUND('',#333459,.F.); +#333459 = EDGE_LOOP('',(#333460)); +#333460 = ORIENTED_EDGE('',*,*,#333446,.T.); +#333461 = FACE_BOUND('',#333462,.F.); +#333462 = EDGE_LOOP('',(#333463)); +#333463 = ORIENTED_EDGE('',*,*,#333464,.T.); +#333464 = EDGE_CURVE('',#333465,#333465,#333467,.T.); +#333465 = VERTEX_POINT('',#333466); +#333466 = CARTESIAN_POINT('',(131.175,-91.,-4.E-02)); +#333467 = CIRCLE('',#333468,0.75); +#333468 = AXIS2_PLACEMENT_3D('',#333469,#333470,#333471); +#333469 = CARTESIAN_POINT('',(131.175,-90.25,-4.E-02)); +#333470 = DIRECTION('',(-0.,0.,-1.)); +#333471 = DIRECTION('',(-0.,-1.,0.)); +#333472 = PLANE('',#333473); +#333473 = AXIS2_PLACEMENT_3D('',#333474,#333475,#333476); +#333474 = CARTESIAN_POINT('',(131.175,-91.025,-4.E-02)); +#333475 = DIRECTION('',(0.,0.,1.)); +#333476 = DIRECTION('',(1.,0.,-0.)); +#333477 = ADVANCED_FACE('',(#333478,#333481),#333492,.T.); +#333478 = FACE_BOUND('',#333479,.T.); +#333479 = EDGE_LOOP('',(#333480)); +#333480 = ORIENTED_EDGE('',*,*,#333438,.T.); +#333481 = FACE_BOUND('',#333482,.T.); +#333482 = EDGE_LOOP('',(#333483)); +#333483 = ORIENTED_EDGE('',*,*,#333484,.T.); +#333484 = EDGE_CURVE('',#333485,#333485,#333487,.T.); +#333485 = VERTEX_POINT('',#333486); +#333486 = CARTESIAN_POINT('',(131.175,-91.,1.55)); +#333487 = CIRCLE('',#333488,0.75); +#333488 = AXIS2_PLACEMENT_3D('',#333489,#333490,#333491); +#333489 = CARTESIAN_POINT('',(131.175,-90.25,1.55)); +#333490 = DIRECTION('',(-0.,0.,-1.)); +#333491 = DIRECTION('',(-0.,-1.,0.)); +#333492 = PLANE('',#333493); +#333493 = AXIS2_PLACEMENT_3D('',#333494,#333495,#333496); +#333494 = CARTESIAN_POINT('',(131.175,-91.025,1.55)); +#333495 = DIRECTION('',(0.,0.,1.)); +#333496 = DIRECTION('',(1.,0.,-0.)); +#333497 = ADVANCED_FACE('',(#333498),#333509,.F.); +#333498 = FACE_BOUND('',#333499,.T.); +#333499 = EDGE_LOOP('',(#333500,#333501,#333507,#333508)); +#333500 = ORIENTED_EDGE('',*,*,#333464,.T.); +#333501 = ORIENTED_EDGE('',*,*,#333502,.T.); +#333502 = EDGE_CURVE('',#333465,#333485,#333503,.T.); +#333503 = LINE('',#333504,#333505); +#333504 = CARTESIAN_POINT('',(131.175,-91.,-4.6E-02)); +#333505 = VECTOR('',#333506,1.); +#333506 = DIRECTION('',(0.,0.,1.)); +#333507 = ORIENTED_EDGE('',*,*,#333484,.F.); +#333508 = ORIENTED_EDGE('',*,*,#333502,.F.); +#333509 = CYLINDRICAL_SURFACE('',#333510,0.75); +#333510 = AXIS2_PLACEMENT_3D('',#333511,#333512,#333513); +#333511 = CARTESIAN_POINT('',(131.175,-90.25,-4.6E-02)); +#333512 = DIRECTION('',(-0.,-0.,-1.)); +#333513 = DIRECTION('',(-0.,-1.,0.)); +#333514 = MANIFOLD_SOLID_BREP('',#333515); +#333515 = CLOSED_SHELL('',(#333516,#333549,#333569,#333589)); +#333516 = ADVANCED_FACE('',(#333517),#333544,.T.); +#333517 = FACE_BOUND('',#333518,.F.); +#333518 = EDGE_LOOP('',(#333519,#333529,#333536,#333537)); +#333519 = ORIENTED_EDGE('',*,*,#333520,.T.); +#333520 = EDGE_CURVE('',#333521,#333523,#333525,.T.); +#333521 = VERTEX_POINT('',#333522); +#333522 = CARTESIAN_POINT('',(132.45,-100.25,1.51)); +#333523 = VERTEX_POINT('',#333524); +#333524 = CARTESIAN_POINT('',(132.45,-100.25,1.55)); +#333525 = LINE('',#333526,#333527); +#333526 = CARTESIAN_POINT('',(132.45,-100.25,1.51)); +#333527 = VECTOR('',#333528,1.); +#333528 = DIRECTION('',(0.,0.,1.)); +#333529 = ORIENTED_EDGE('',*,*,#333530,.T.); +#333530 = EDGE_CURVE('',#333523,#333523,#333531,.T.); +#333531 = CIRCLE('',#333532,1.275); +#333532 = AXIS2_PLACEMENT_3D('',#333533,#333534,#333535); +#333533 = CARTESIAN_POINT('',(131.175,-100.25,1.55)); +#333534 = DIRECTION('',(0.,0.,1.)); +#333535 = DIRECTION('',(1.,0.,-0.)); +#333536 = ORIENTED_EDGE('',*,*,#333520,.F.); +#333537 = ORIENTED_EDGE('',*,*,#333538,.F.); +#333538 = EDGE_CURVE('',#333521,#333521,#333539,.T.); +#333539 = CIRCLE('',#333540,1.275); +#333540 = AXIS2_PLACEMENT_3D('',#333541,#333542,#333543); +#333541 = CARTESIAN_POINT('',(131.175,-100.25,1.51)); +#333542 = DIRECTION('',(0.,0.,1.)); +#333543 = DIRECTION('',(1.,0.,-0.)); +#333544 = CYLINDRICAL_SURFACE('',#333545,1.275); +#333545 = AXIS2_PLACEMENT_3D('',#333546,#333547,#333548); +#333546 = CARTESIAN_POINT('',(131.175,-100.25,1.51)); +#333547 = DIRECTION('',(-0.,-0.,-1.)); +#333548 = DIRECTION('',(1.,0.,-0.)); +#333549 = ADVANCED_FACE('',(#333550,#333553),#333564,.F.); +#333550 = FACE_BOUND('',#333551,.F.); +#333551 = EDGE_LOOP('',(#333552)); +#333552 = ORIENTED_EDGE('',*,*,#333538,.T.); +#333553 = FACE_BOUND('',#333554,.F.); +#333554 = EDGE_LOOP('',(#333555)); +#333555 = ORIENTED_EDGE('',*,*,#333556,.T.); +#333556 = EDGE_CURVE('',#333557,#333557,#333559,.T.); +#333557 = VERTEX_POINT('',#333558); +#333558 = CARTESIAN_POINT('',(131.175,-101.,1.51)); +#333559 = CIRCLE('',#333560,0.75); +#333560 = AXIS2_PLACEMENT_3D('',#333561,#333562,#333563); +#333561 = CARTESIAN_POINT('',(131.175,-100.25,1.51)); +#333562 = DIRECTION('',(-0.,0.,-1.)); +#333563 = DIRECTION('',(-0.,-1.,0.)); +#333564 = PLANE('',#333565); +#333565 = AXIS2_PLACEMENT_3D('',#333566,#333567,#333568); +#333566 = CARTESIAN_POINT('',(0.,0.,1.51)); +#333567 = DIRECTION('',(0.,0.,1.)); +#333568 = DIRECTION('',(1.,0.,-0.)); +#333569 = ADVANCED_FACE('',(#333570,#333573),#333584,.T.); +#333570 = FACE_BOUND('',#333571,.T.); +#333571 = EDGE_LOOP('',(#333572)); +#333572 = ORIENTED_EDGE('',*,*,#333530,.T.); +#333573 = FACE_BOUND('',#333574,.T.); +#333574 = EDGE_LOOP('',(#333575)); +#333575 = ORIENTED_EDGE('',*,*,#333576,.T.); +#333576 = EDGE_CURVE('',#333577,#333577,#333579,.T.); +#333577 = VERTEX_POINT('',#333578); +#333578 = CARTESIAN_POINT('',(131.175,-101.,1.55)); +#333579 = CIRCLE('',#333580,0.75); +#333580 = AXIS2_PLACEMENT_3D('',#333581,#333582,#333583); +#333581 = CARTESIAN_POINT('',(131.175,-100.25,1.55)); +#333582 = DIRECTION('',(-0.,0.,-1.)); +#333583 = DIRECTION('',(-0.,-1.,0.)); +#333584 = PLANE('',#333585); +#333585 = AXIS2_PLACEMENT_3D('',#333586,#333587,#333588); +#333586 = CARTESIAN_POINT('',(0.,0.,1.55)); +#333587 = DIRECTION('',(0.,0.,1.)); +#333588 = DIRECTION('',(1.,0.,-0.)); +#333589 = ADVANCED_FACE('',(#333590),#333601,.F.); +#333590 = FACE_BOUND('',#333591,.T.); +#333591 = EDGE_LOOP('',(#333592,#333593,#333599,#333600)); +#333592 = ORIENTED_EDGE('',*,*,#333556,.T.); +#333593 = ORIENTED_EDGE('',*,*,#333594,.T.); +#333594 = EDGE_CURVE('',#333557,#333577,#333595,.T.); +#333595 = LINE('',#333596,#333597); +#333596 = CARTESIAN_POINT('',(131.175,-101.,-4.6E-02)); +#333597 = VECTOR('',#333598,1.); +#333598 = DIRECTION('',(0.,0.,1.)); +#333599 = ORIENTED_EDGE('',*,*,#333576,.F.); +#333600 = ORIENTED_EDGE('',*,*,#333594,.F.); +#333601 = CYLINDRICAL_SURFACE('',#333602,0.75); +#333602 = AXIS2_PLACEMENT_3D('',#333603,#333604,#333605); +#333603 = CARTESIAN_POINT('',(131.175,-100.25,-4.6E-02)); +#333604 = DIRECTION('',(-0.,-0.,-1.)); +#333605 = DIRECTION('',(-0.,-1.,0.)); +#333606 = MANIFOLD_SOLID_BREP('',#333607); +#333607 = CLOSED_SHELL('',(#333608,#333641,#333661,#333681)); +#333608 = ADVANCED_FACE('',(#333609),#333636,.T.); +#333609 = FACE_BOUND('',#333610,.T.); +#333610 = EDGE_LOOP('',(#333611,#333621,#333628,#333629)); +#333611 = ORIENTED_EDGE('',*,*,#333612,.T.); +#333612 = EDGE_CURVE('',#333613,#333615,#333617,.T.); +#333613 = VERTEX_POINT('',#333614); +#333614 = CARTESIAN_POINT('',(132.45,-100.25,0.)); +#333615 = VERTEX_POINT('',#333616); +#333616 = CARTESIAN_POINT('',(132.45,-100.25,-4.E-02)); +#333617 = LINE('',#333618,#333619); +#333618 = CARTESIAN_POINT('',(132.45,-100.25,0.)); +#333619 = VECTOR('',#333620,1.); +#333620 = DIRECTION('',(0.,0.,-1.)); +#333621 = ORIENTED_EDGE('',*,*,#333622,.T.); +#333622 = EDGE_CURVE('',#333615,#333615,#333623,.T.); +#333623 = CIRCLE('',#333624,1.275); +#333624 = AXIS2_PLACEMENT_3D('',#333625,#333626,#333627); +#333625 = CARTESIAN_POINT('',(131.175,-100.25,-4.E-02)); +#333626 = DIRECTION('',(0.,0.,1.)); +#333627 = DIRECTION('',(1.,0.,-0.)); +#333628 = ORIENTED_EDGE('',*,*,#333612,.F.); +#333629 = ORIENTED_EDGE('',*,*,#333630,.F.); +#333630 = EDGE_CURVE('',#333613,#333613,#333631,.T.); +#333631 = CIRCLE('',#333632,1.275); +#333632 = AXIS2_PLACEMENT_3D('',#333633,#333634,#333635); +#333633 = CARTESIAN_POINT('',(131.175,-100.25,0.)); +#333634 = DIRECTION('',(0.,0.,1.)); +#333635 = DIRECTION('',(1.,0.,-0.)); +#333636 = CYLINDRICAL_SURFACE('',#333637,1.275); +#333637 = AXIS2_PLACEMENT_3D('',#333638,#333639,#333640); +#333638 = CARTESIAN_POINT('',(131.175,-100.25,0.)); +#333639 = DIRECTION('',(0.,0.,1.)); +#333640 = DIRECTION('',(1.,0.,-0.)); +#333641 = ADVANCED_FACE('',(#333642,#333645),#333656,.F.); +#333642 = FACE_BOUND('',#333643,.F.); +#333643 = EDGE_LOOP('',(#333644)); +#333644 = ORIENTED_EDGE('',*,*,#333630,.F.); +#333645 = FACE_BOUND('',#333646,.F.); +#333646 = EDGE_LOOP('',(#333647)); +#333647 = ORIENTED_EDGE('',*,*,#333648,.F.); +#333648 = EDGE_CURVE('',#333649,#333649,#333651,.T.); +#333649 = VERTEX_POINT('',#333650); +#333650 = CARTESIAN_POINT('',(131.175,-101.,0.)); +#333651 = CIRCLE('',#333652,0.75); +#333652 = AXIS2_PLACEMENT_3D('',#333653,#333654,#333655); +#333653 = CARTESIAN_POINT('',(131.175,-100.25,0.)); +#333654 = DIRECTION('',(-0.,0.,-1.)); +#333655 = DIRECTION('',(-0.,-1.,0.)); +#333656 = PLANE('',#333657); +#333657 = AXIS2_PLACEMENT_3D('',#333658,#333659,#333660); +#333658 = CARTESIAN_POINT('',(0.,0.,0.)); +#333659 = DIRECTION('',(-0.,-0.,-1.)); +#333660 = DIRECTION('',(-1.,0.,0.)); +#333661 = ADVANCED_FACE('',(#333662,#333665),#333676,.T.); +#333662 = FACE_BOUND('',#333663,.T.); +#333663 = EDGE_LOOP('',(#333664)); +#333664 = ORIENTED_EDGE('',*,*,#333622,.F.); +#333665 = FACE_BOUND('',#333666,.T.); +#333666 = EDGE_LOOP('',(#333667)); +#333667 = ORIENTED_EDGE('',*,*,#333668,.F.); +#333668 = EDGE_CURVE('',#333669,#333669,#333671,.T.); +#333669 = VERTEX_POINT('',#333670); +#333670 = CARTESIAN_POINT('',(131.175,-101.,-4.E-02)); +#333671 = CIRCLE('',#333672,0.75); +#333672 = AXIS2_PLACEMENT_3D('',#333673,#333674,#333675); +#333673 = CARTESIAN_POINT('',(131.175,-100.25,-4.E-02)); +#333674 = DIRECTION('',(-0.,0.,-1.)); +#333675 = DIRECTION('',(-0.,-1.,0.)); +#333676 = PLANE('',#333677); +#333677 = AXIS2_PLACEMENT_3D('',#333678,#333679,#333680); +#333678 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#333679 = DIRECTION('',(-0.,-0.,-1.)); +#333680 = DIRECTION('',(-1.,0.,0.)); +#333681 = ADVANCED_FACE('',(#333682),#333693,.F.); +#333682 = FACE_BOUND('',#333683,.T.); +#333683 = EDGE_LOOP('',(#333684,#333685,#333691,#333692)); +#333684 = ORIENTED_EDGE('',*,*,#333668,.T.); +#333685 = ORIENTED_EDGE('',*,*,#333686,.T.); +#333686 = EDGE_CURVE('',#333669,#333649,#333687,.T.); +#333687 = LINE('',#333688,#333689); +#333688 = CARTESIAN_POINT('',(131.175,-101.,-4.6E-02)); +#333689 = VECTOR('',#333690,1.); +#333690 = DIRECTION('',(0.,0.,1.)); +#333691 = ORIENTED_EDGE('',*,*,#333648,.F.); +#333692 = ORIENTED_EDGE('',*,*,#333686,.F.); +#333693 = CYLINDRICAL_SURFACE('',#333694,0.75); +#333694 = AXIS2_PLACEMENT_3D('',#333695,#333696,#333697); +#333695 = CARTESIAN_POINT('',(131.175,-100.25,-4.6E-02)); +#333696 = DIRECTION('',(-0.,-0.,-1.)); +#333697 = DIRECTION('',(-0.,-1.,0.)); +#333698 = MANIFOLD_SOLID_BREP('',#333699); +#333699 = CLOSED_SHELL('',(#333700,#333733,#333753,#333773)); +#333700 = ADVANCED_FACE('',(#333701),#333728,.T.); +#333701 = FACE_BOUND('',#333702,.F.); +#333702 = EDGE_LOOP('',(#333703,#333713,#333720,#333721)); +#333703 = ORIENTED_EDGE('',*,*,#333704,.T.); +#333704 = EDGE_CURVE('',#333705,#333707,#333709,.T.); +#333705 = VERTEX_POINT('',#333706); +#333706 = CARTESIAN_POINT('',(131.175,-101.025,-4.E-02)); +#333707 = VERTEX_POINT('',#333708); +#333708 = CARTESIAN_POINT('',(131.175,-101.025,1.55)); +#333709 = LINE('',#333710,#333711); +#333710 = CARTESIAN_POINT('',(131.175,-101.025,-4.E-02)); +#333711 = VECTOR('',#333712,1.); +#333712 = DIRECTION('',(0.,0.,1.)); +#333713 = ORIENTED_EDGE('',*,*,#333714,.T.); +#333714 = EDGE_CURVE('',#333707,#333707,#333715,.T.); +#333715 = CIRCLE('',#333716,0.775); +#333716 = AXIS2_PLACEMENT_3D('',#333717,#333718,#333719); +#333717 = CARTESIAN_POINT('',(131.175,-100.25,1.55)); +#333718 = DIRECTION('',(0.,0.,1.)); +#333719 = DIRECTION('',(-0.,-1.,0.)); +#333720 = ORIENTED_EDGE('',*,*,#333704,.F.); +#333721 = ORIENTED_EDGE('',*,*,#333722,.F.); +#333722 = EDGE_CURVE('',#333705,#333705,#333723,.T.); +#333723 = CIRCLE('',#333724,0.775); +#333724 = AXIS2_PLACEMENT_3D('',#333725,#333726,#333727); +#333725 = CARTESIAN_POINT('',(131.175,-100.25,-4.E-02)); +#333726 = DIRECTION('',(0.,0.,1.)); +#333727 = DIRECTION('',(-0.,-1.,0.)); +#333728 = CYLINDRICAL_SURFACE('',#333729,0.775); +#333729 = AXIS2_PLACEMENT_3D('',#333730,#333731,#333732); +#333730 = CARTESIAN_POINT('',(131.175,-100.25,-4.E-02)); +#333731 = DIRECTION('',(-0.,-0.,-1.)); +#333732 = DIRECTION('',(-0.,-1.,0.)); +#333733 = ADVANCED_FACE('',(#333734,#333737),#333748,.F.); +#333734 = FACE_BOUND('',#333735,.F.); +#333735 = EDGE_LOOP('',(#333736)); +#333736 = ORIENTED_EDGE('',*,*,#333722,.T.); +#333737 = FACE_BOUND('',#333738,.F.); +#333738 = EDGE_LOOP('',(#333739)); +#333739 = ORIENTED_EDGE('',*,*,#333740,.T.); +#333740 = EDGE_CURVE('',#333741,#333741,#333743,.T.); +#333741 = VERTEX_POINT('',#333742); +#333742 = CARTESIAN_POINT('',(131.175,-101.,-4.E-02)); +#333743 = CIRCLE('',#333744,0.75); +#333744 = AXIS2_PLACEMENT_3D('',#333745,#333746,#333747); +#333745 = CARTESIAN_POINT('',(131.175,-100.25,-4.E-02)); +#333746 = DIRECTION('',(-0.,0.,-1.)); +#333747 = DIRECTION('',(-0.,-1.,0.)); +#333748 = PLANE('',#333749); +#333749 = AXIS2_PLACEMENT_3D('',#333750,#333751,#333752); +#333750 = CARTESIAN_POINT('',(131.175,-101.025,-4.E-02)); +#333751 = DIRECTION('',(0.,0.,1.)); +#333752 = DIRECTION('',(1.,0.,-0.)); +#333753 = ADVANCED_FACE('',(#333754,#333757),#333768,.T.); +#333754 = FACE_BOUND('',#333755,.T.); +#333755 = EDGE_LOOP('',(#333756)); +#333756 = ORIENTED_EDGE('',*,*,#333714,.T.); +#333757 = FACE_BOUND('',#333758,.T.); +#333758 = EDGE_LOOP('',(#333759)); +#333759 = ORIENTED_EDGE('',*,*,#333760,.T.); +#333760 = EDGE_CURVE('',#333761,#333761,#333763,.T.); +#333761 = VERTEX_POINT('',#333762); +#333762 = CARTESIAN_POINT('',(131.175,-101.,1.55)); +#333763 = CIRCLE('',#333764,0.75); +#333764 = AXIS2_PLACEMENT_3D('',#333765,#333766,#333767); +#333765 = CARTESIAN_POINT('',(131.175,-100.25,1.55)); +#333766 = DIRECTION('',(-0.,0.,-1.)); +#333767 = DIRECTION('',(-0.,-1.,0.)); +#333768 = PLANE('',#333769); +#333769 = AXIS2_PLACEMENT_3D('',#333770,#333771,#333772); +#333770 = CARTESIAN_POINT('',(131.175,-101.025,1.55)); +#333771 = DIRECTION('',(0.,0.,1.)); +#333772 = DIRECTION('',(1.,0.,-0.)); +#333773 = ADVANCED_FACE('',(#333774),#333785,.F.); +#333774 = FACE_BOUND('',#333775,.T.); +#333775 = EDGE_LOOP('',(#333776,#333777,#333783,#333784)); +#333776 = ORIENTED_EDGE('',*,*,#333740,.T.); +#333777 = ORIENTED_EDGE('',*,*,#333778,.T.); +#333778 = EDGE_CURVE('',#333741,#333761,#333779,.T.); +#333779 = LINE('',#333780,#333781); +#333780 = CARTESIAN_POINT('',(131.175,-101.,-4.6E-02)); +#333781 = VECTOR('',#333782,1.); +#333782 = DIRECTION('',(0.,0.,1.)); +#333783 = ORIENTED_EDGE('',*,*,#333760,.F.); +#333784 = ORIENTED_EDGE('',*,*,#333778,.F.); +#333785 = CYLINDRICAL_SURFACE('',#333786,0.75); +#333786 = AXIS2_PLACEMENT_3D('',#333787,#333788,#333789); +#333787 = CARTESIAN_POINT('',(131.175,-100.25,-4.6E-02)); +#333788 = DIRECTION('',(-0.,-0.,-1.)); +#333789 = DIRECTION('',(-0.,-1.,0.)); +#333790 = MANIFOLD_SOLID_BREP('',#333791); +#333791 = CLOSED_SHELL('',(#333792,#333825,#333845,#333865)); +#333792 = ADVANCED_FACE('',(#333793),#333820,.T.); +#333793 = FACE_BOUND('',#333794,.F.); +#333794 = EDGE_LOOP('',(#333795,#333805,#333812,#333813)); +#333795 = ORIENTED_EDGE('',*,*,#333796,.T.); +#333796 = EDGE_CURVE('',#333797,#333799,#333801,.T.); +#333797 = VERTEX_POINT('',#333798); +#333798 = CARTESIAN_POINT('',(145.1,-90.25,1.51)); +#333799 = VERTEX_POINT('',#333800); +#333800 = CARTESIAN_POINT('',(145.1,-90.25,1.55)); +#333801 = LINE('',#333802,#333803); +#333802 = CARTESIAN_POINT('',(145.1,-90.25,1.51)); +#333803 = VECTOR('',#333804,1.); +#333804 = DIRECTION('',(0.,0.,1.)); +#333805 = ORIENTED_EDGE('',*,*,#333806,.T.); +#333806 = EDGE_CURVE('',#333799,#333799,#333807,.T.); +#333807 = CIRCLE('',#333808,1.275); +#333808 = AXIS2_PLACEMENT_3D('',#333809,#333810,#333811); +#333809 = CARTESIAN_POINT('',(143.825,-90.25,1.55)); +#333810 = DIRECTION('',(0.,0.,1.)); +#333811 = DIRECTION('',(1.,0.,-0.)); +#333812 = ORIENTED_EDGE('',*,*,#333796,.F.); +#333813 = ORIENTED_EDGE('',*,*,#333814,.F.); +#333814 = EDGE_CURVE('',#333797,#333797,#333815,.T.); +#333815 = CIRCLE('',#333816,1.275); +#333816 = AXIS2_PLACEMENT_3D('',#333817,#333818,#333819); +#333817 = CARTESIAN_POINT('',(143.825,-90.25,1.51)); +#333818 = DIRECTION('',(0.,0.,1.)); +#333819 = DIRECTION('',(1.,0.,-0.)); +#333820 = CYLINDRICAL_SURFACE('',#333821,1.275); +#333821 = AXIS2_PLACEMENT_3D('',#333822,#333823,#333824); +#333822 = CARTESIAN_POINT('',(143.825,-90.25,1.51)); +#333823 = DIRECTION('',(-0.,-0.,-1.)); +#333824 = DIRECTION('',(1.,0.,-0.)); +#333825 = ADVANCED_FACE('',(#333826,#333829),#333840,.F.); +#333826 = FACE_BOUND('',#333827,.F.); +#333827 = EDGE_LOOP('',(#333828)); +#333828 = ORIENTED_EDGE('',*,*,#333814,.T.); +#333829 = FACE_BOUND('',#333830,.F.); +#333830 = EDGE_LOOP('',(#333831)); +#333831 = ORIENTED_EDGE('',*,*,#333832,.T.); +#333832 = EDGE_CURVE('',#333833,#333833,#333835,.T.); +#333833 = VERTEX_POINT('',#333834); +#333834 = CARTESIAN_POINT('',(143.825,-91.,1.51)); +#333835 = CIRCLE('',#333836,0.75); +#333836 = AXIS2_PLACEMENT_3D('',#333837,#333838,#333839); +#333837 = CARTESIAN_POINT('',(143.825,-90.25,1.51)); +#333838 = DIRECTION('',(-0.,0.,-1.)); +#333839 = DIRECTION('',(-0.,-1.,0.)); +#333840 = PLANE('',#333841); +#333841 = AXIS2_PLACEMENT_3D('',#333842,#333843,#333844); +#333842 = CARTESIAN_POINT('',(0.,0.,1.51)); +#333843 = DIRECTION('',(0.,0.,1.)); +#333844 = DIRECTION('',(1.,0.,-0.)); +#333845 = ADVANCED_FACE('',(#333846,#333849),#333860,.T.); +#333846 = FACE_BOUND('',#333847,.T.); +#333847 = EDGE_LOOP('',(#333848)); +#333848 = ORIENTED_EDGE('',*,*,#333806,.T.); +#333849 = FACE_BOUND('',#333850,.T.); +#333850 = EDGE_LOOP('',(#333851)); +#333851 = ORIENTED_EDGE('',*,*,#333852,.T.); +#333852 = EDGE_CURVE('',#333853,#333853,#333855,.T.); +#333853 = VERTEX_POINT('',#333854); +#333854 = CARTESIAN_POINT('',(143.825,-91.,1.55)); +#333855 = CIRCLE('',#333856,0.75); +#333856 = AXIS2_PLACEMENT_3D('',#333857,#333858,#333859); +#333857 = CARTESIAN_POINT('',(143.825,-90.25,1.55)); +#333858 = DIRECTION('',(-0.,0.,-1.)); +#333859 = DIRECTION('',(-0.,-1.,0.)); +#333860 = PLANE('',#333861); +#333861 = AXIS2_PLACEMENT_3D('',#333862,#333863,#333864); +#333862 = CARTESIAN_POINT('',(0.,0.,1.55)); +#333863 = DIRECTION('',(0.,0.,1.)); +#333864 = DIRECTION('',(1.,0.,-0.)); +#333865 = ADVANCED_FACE('',(#333866),#333877,.F.); +#333866 = FACE_BOUND('',#333867,.T.); +#333867 = EDGE_LOOP('',(#333868,#333869,#333875,#333876)); +#333868 = ORIENTED_EDGE('',*,*,#333832,.T.); +#333869 = ORIENTED_EDGE('',*,*,#333870,.T.); +#333870 = EDGE_CURVE('',#333833,#333853,#333871,.T.); +#333871 = LINE('',#333872,#333873); +#333872 = CARTESIAN_POINT('',(143.825,-91.,-4.6E-02)); +#333873 = VECTOR('',#333874,1.); +#333874 = DIRECTION('',(0.,0.,1.)); +#333875 = ORIENTED_EDGE('',*,*,#333852,.F.); +#333876 = ORIENTED_EDGE('',*,*,#333870,.F.); +#333877 = CYLINDRICAL_SURFACE('',#333878,0.75); +#333878 = AXIS2_PLACEMENT_3D('',#333879,#333880,#333881); +#333879 = CARTESIAN_POINT('',(143.825,-90.25,-4.6E-02)); +#333880 = DIRECTION('',(-0.,-0.,-1.)); +#333881 = DIRECTION('',(-0.,-1.,0.)); +#333882 = MANIFOLD_SOLID_BREP('',#333883); +#333883 = CLOSED_SHELL('',(#333884,#333917,#333937,#333957)); +#333884 = ADVANCED_FACE('',(#333885),#333912,.T.); +#333885 = FACE_BOUND('',#333886,.T.); +#333886 = EDGE_LOOP('',(#333887,#333897,#333904,#333905)); +#333887 = ORIENTED_EDGE('',*,*,#333888,.T.); +#333888 = EDGE_CURVE('',#333889,#333891,#333893,.T.); +#333889 = VERTEX_POINT('',#333890); +#333890 = CARTESIAN_POINT('',(145.1,-90.25,0.)); +#333891 = VERTEX_POINT('',#333892); +#333892 = CARTESIAN_POINT('',(145.1,-90.25,-4.E-02)); +#333893 = LINE('',#333894,#333895); +#333894 = CARTESIAN_POINT('',(145.1,-90.25,0.)); +#333895 = VECTOR('',#333896,1.); +#333896 = DIRECTION('',(0.,0.,-1.)); +#333897 = ORIENTED_EDGE('',*,*,#333898,.T.); +#333898 = EDGE_CURVE('',#333891,#333891,#333899,.T.); +#333899 = CIRCLE('',#333900,1.275); +#333900 = AXIS2_PLACEMENT_3D('',#333901,#333902,#333903); +#333901 = CARTESIAN_POINT('',(143.825,-90.25,-4.E-02)); +#333902 = DIRECTION('',(0.,0.,1.)); +#333903 = DIRECTION('',(1.,0.,-0.)); +#333904 = ORIENTED_EDGE('',*,*,#333888,.F.); +#333905 = ORIENTED_EDGE('',*,*,#333906,.F.); +#333906 = EDGE_CURVE('',#333889,#333889,#333907,.T.); +#333907 = CIRCLE('',#333908,1.275); +#333908 = AXIS2_PLACEMENT_3D('',#333909,#333910,#333911); +#333909 = CARTESIAN_POINT('',(143.825,-90.25,0.)); +#333910 = DIRECTION('',(0.,0.,1.)); +#333911 = DIRECTION('',(1.,0.,-0.)); +#333912 = CYLINDRICAL_SURFACE('',#333913,1.275); +#333913 = AXIS2_PLACEMENT_3D('',#333914,#333915,#333916); +#333914 = CARTESIAN_POINT('',(143.825,-90.25,0.)); +#333915 = DIRECTION('',(0.,0.,1.)); +#333916 = DIRECTION('',(1.,0.,-0.)); +#333917 = ADVANCED_FACE('',(#333918,#333921),#333932,.F.); +#333918 = FACE_BOUND('',#333919,.F.); +#333919 = EDGE_LOOP('',(#333920)); +#333920 = ORIENTED_EDGE('',*,*,#333906,.F.); +#333921 = FACE_BOUND('',#333922,.F.); +#333922 = EDGE_LOOP('',(#333923)); +#333923 = ORIENTED_EDGE('',*,*,#333924,.F.); +#333924 = EDGE_CURVE('',#333925,#333925,#333927,.T.); +#333925 = VERTEX_POINT('',#333926); +#333926 = CARTESIAN_POINT('',(143.825,-91.,0.)); +#333927 = CIRCLE('',#333928,0.75); +#333928 = AXIS2_PLACEMENT_3D('',#333929,#333930,#333931); +#333929 = CARTESIAN_POINT('',(143.825,-90.25,0.)); +#333930 = DIRECTION('',(-0.,0.,-1.)); +#333931 = DIRECTION('',(-0.,-1.,0.)); +#333932 = PLANE('',#333933); +#333933 = AXIS2_PLACEMENT_3D('',#333934,#333935,#333936); +#333934 = CARTESIAN_POINT('',(0.,0.,0.)); +#333935 = DIRECTION('',(-0.,-0.,-1.)); +#333936 = DIRECTION('',(-1.,0.,0.)); +#333937 = ADVANCED_FACE('',(#333938,#333941),#333952,.T.); +#333938 = FACE_BOUND('',#333939,.T.); +#333939 = EDGE_LOOP('',(#333940)); +#333940 = ORIENTED_EDGE('',*,*,#333898,.F.); +#333941 = FACE_BOUND('',#333942,.T.); +#333942 = EDGE_LOOP('',(#333943)); +#333943 = ORIENTED_EDGE('',*,*,#333944,.F.); +#333944 = EDGE_CURVE('',#333945,#333945,#333947,.T.); +#333945 = VERTEX_POINT('',#333946); +#333946 = CARTESIAN_POINT('',(143.825,-91.,-4.E-02)); +#333947 = CIRCLE('',#333948,0.75); +#333948 = AXIS2_PLACEMENT_3D('',#333949,#333950,#333951); +#333949 = CARTESIAN_POINT('',(143.825,-90.25,-4.E-02)); +#333950 = DIRECTION('',(-0.,0.,-1.)); +#333951 = DIRECTION('',(-0.,-1.,0.)); +#333952 = PLANE('',#333953); +#333953 = AXIS2_PLACEMENT_3D('',#333954,#333955,#333956); +#333954 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#333955 = DIRECTION('',(-0.,-0.,-1.)); +#333956 = DIRECTION('',(-1.,0.,0.)); +#333957 = ADVANCED_FACE('',(#333958),#333969,.F.); +#333958 = FACE_BOUND('',#333959,.T.); +#333959 = EDGE_LOOP('',(#333960,#333961,#333967,#333968)); +#333960 = ORIENTED_EDGE('',*,*,#333944,.T.); +#333961 = ORIENTED_EDGE('',*,*,#333962,.T.); +#333962 = EDGE_CURVE('',#333945,#333925,#333963,.T.); +#333963 = LINE('',#333964,#333965); +#333964 = CARTESIAN_POINT('',(143.825,-91.,-4.6E-02)); +#333965 = VECTOR('',#333966,1.); +#333966 = DIRECTION('',(0.,0.,1.)); +#333967 = ORIENTED_EDGE('',*,*,#333924,.F.); +#333968 = ORIENTED_EDGE('',*,*,#333962,.F.); +#333969 = CYLINDRICAL_SURFACE('',#333970,0.75); +#333970 = AXIS2_PLACEMENT_3D('',#333971,#333972,#333973); +#333971 = CARTESIAN_POINT('',(143.825,-90.25,-4.6E-02)); +#333972 = DIRECTION('',(-0.,-0.,-1.)); +#333973 = DIRECTION('',(-0.,-1.,0.)); +#333974 = MANIFOLD_SOLID_BREP('',#333975); +#333975 = CLOSED_SHELL('',(#333976,#334009,#334029,#334049)); +#333976 = ADVANCED_FACE('',(#333977),#334004,.T.); +#333977 = FACE_BOUND('',#333978,.F.); +#333978 = EDGE_LOOP('',(#333979,#333989,#333996,#333997)); +#333979 = ORIENTED_EDGE('',*,*,#333980,.T.); +#333980 = EDGE_CURVE('',#333981,#333983,#333985,.T.); +#333981 = VERTEX_POINT('',#333982); +#333982 = CARTESIAN_POINT('',(143.825,-91.025,-4.E-02)); +#333983 = VERTEX_POINT('',#333984); +#333984 = CARTESIAN_POINT('',(143.825,-91.025,1.55)); +#333985 = LINE('',#333986,#333987); +#333986 = CARTESIAN_POINT('',(143.825,-91.025,-4.E-02)); +#333987 = VECTOR('',#333988,1.); +#333988 = DIRECTION('',(0.,0.,1.)); +#333989 = ORIENTED_EDGE('',*,*,#333990,.T.); +#333990 = EDGE_CURVE('',#333983,#333983,#333991,.T.); +#333991 = CIRCLE('',#333992,0.775); +#333992 = AXIS2_PLACEMENT_3D('',#333993,#333994,#333995); +#333993 = CARTESIAN_POINT('',(143.825,-90.25,1.55)); +#333994 = DIRECTION('',(0.,0.,1.)); +#333995 = DIRECTION('',(-0.,-1.,0.)); +#333996 = ORIENTED_EDGE('',*,*,#333980,.F.); +#333997 = ORIENTED_EDGE('',*,*,#333998,.F.); +#333998 = EDGE_CURVE('',#333981,#333981,#333999,.T.); +#333999 = CIRCLE('',#334000,0.775); +#334000 = AXIS2_PLACEMENT_3D('',#334001,#334002,#334003); +#334001 = CARTESIAN_POINT('',(143.825,-90.25,-4.E-02)); +#334002 = DIRECTION('',(0.,0.,1.)); +#334003 = DIRECTION('',(-0.,-1.,0.)); +#334004 = CYLINDRICAL_SURFACE('',#334005,0.775); +#334005 = AXIS2_PLACEMENT_3D('',#334006,#334007,#334008); +#334006 = CARTESIAN_POINT('',(143.825,-90.25,-4.E-02)); +#334007 = DIRECTION('',(-0.,-0.,-1.)); +#334008 = DIRECTION('',(-0.,-1.,0.)); +#334009 = ADVANCED_FACE('',(#334010,#334013),#334024,.F.); +#334010 = FACE_BOUND('',#334011,.F.); +#334011 = EDGE_LOOP('',(#334012)); +#334012 = ORIENTED_EDGE('',*,*,#333998,.T.); +#334013 = FACE_BOUND('',#334014,.F.); +#334014 = EDGE_LOOP('',(#334015)); +#334015 = ORIENTED_EDGE('',*,*,#334016,.T.); +#334016 = EDGE_CURVE('',#334017,#334017,#334019,.T.); +#334017 = VERTEX_POINT('',#334018); +#334018 = CARTESIAN_POINT('',(143.825,-91.,-4.E-02)); +#334019 = CIRCLE('',#334020,0.75); +#334020 = AXIS2_PLACEMENT_3D('',#334021,#334022,#334023); +#334021 = CARTESIAN_POINT('',(143.825,-90.25,-4.E-02)); +#334022 = DIRECTION('',(-0.,0.,-1.)); +#334023 = DIRECTION('',(-0.,-1.,0.)); +#334024 = PLANE('',#334025); +#334025 = AXIS2_PLACEMENT_3D('',#334026,#334027,#334028); +#334026 = CARTESIAN_POINT('',(143.825,-91.025,-4.E-02)); +#334027 = DIRECTION('',(0.,0.,1.)); +#334028 = DIRECTION('',(1.,0.,-0.)); +#334029 = ADVANCED_FACE('',(#334030,#334033),#334044,.T.); +#334030 = FACE_BOUND('',#334031,.T.); +#334031 = EDGE_LOOP('',(#334032)); +#334032 = ORIENTED_EDGE('',*,*,#333990,.T.); +#334033 = FACE_BOUND('',#334034,.T.); +#334034 = EDGE_LOOP('',(#334035)); +#334035 = ORIENTED_EDGE('',*,*,#334036,.T.); +#334036 = EDGE_CURVE('',#334037,#334037,#334039,.T.); +#334037 = VERTEX_POINT('',#334038); +#334038 = CARTESIAN_POINT('',(143.825,-91.,1.55)); +#334039 = CIRCLE('',#334040,0.75); +#334040 = AXIS2_PLACEMENT_3D('',#334041,#334042,#334043); +#334041 = CARTESIAN_POINT('',(143.825,-90.25,1.55)); +#334042 = DIRECTION('',(-0.,0.,-1.)); +#334043 = DIRECTION('',(-0.,-1.,0.)); +#334044 = PLANE('',#334045); +#334045 = AXIS2_PLACEMENT_3D('',#334046,#334047,#334048); +#334046 = CARTESIAN_POINT('',(143.825,-91.025,1.55)); +#334047 = DIRECTION('',(0.,0.,1.)); +#334048 = DIRECTION('',(1.,0.,-0.)); +#334049 = ADVANCED_FACE('',(#334050),#334061,.F.); +#334050 = FACE_BOUND('',#334051,.T.); +#334051 = EDGE_LOOP('',(#334052,#334053,#334059,#334060)); +#334052 = ORIENTED_EDGE('',*,*,#334016,.T.); +#334053 = ORIENTED_EDGE('',*,*,#334054,.T.); +#334054 = EDGE_CURVE('',#334017,#334037,#334055,.T.); +#334055 = LINE('',#334056,#334057); +#334056 = CARTESIAN_POINT('',(143.825,-91.,-4.6E-02)); +#334057 = VECTOR('',#334058,1.); +#334058 = DIRECTION('',(0.,0.,1.)); +#334059 = ORIENTED_EDGE('',*,*,#334036,.F.); +#334060 = ORIENTED_EDGE('',*,*,#334054,.F.); +#334061 = CYLINDRICAL_SURFACE('',#334062,0.75); +#334062 = AXIS2_PLACEMENT_3D('',#334063,#334064,#334065); +#334063 = CARTESIAN_POINT('',(143.825,-90.25,-4.6E-02)); +#334064 = DIRECTION('',(-0.,-0.,-1.)); +#334065 = DIRECTION('',(-0.,-1.,0.)); +#334066 = MANIFOLD_SOLID_BREP('',#334067); +#334067 = CLOSED_SHELL('',(#334068,#334101,#334121,#334141)); +#334068 = ADVANCED_FACE('',(#334069),#334096,.T.); +#334069 = FACE_BOUND('',#334070,.F.); +#334070 = EDGE_LOOP('',(#334071,#334081,#334088,#334089)); +#334071 = ORIENTED_EDGE('',*,*,#334072,.T.); +#334072 = EDGE_CURVE('',#334073,#334075,#334077,.T.); +#334073 = VERTEX_POINT('',#334074); +#334074 = CARTESIAN_POINT('',(145.1,-100.25,1.51)); +#334075 = VERTEX_POINT('',#334076); +#334076 = CARTESIAN_POINT('',(145.1,-100.25,1.55)); +#334077 = LINE('',#334078,#334079); +#334078 = CARTESIAN_POINT('',(145.1,-100.25,1.51)); +#334079 = VECTOR('',#334080,1.); +#334080 = DIRECTION('',(0.,0.,1.)); +#334081 = ORIENTED_EDGE('',*,*,#334082,.T.); +#334082 = EDGE_CURVE('',#334075,#334075,#334083,.T.); +#334083 = CIRCLE('',#334084,1.275); +#334084 = AXIS2_PLACEMENT_3D('',#334085,#334086,#334087); +#334085 = CARTESIAN_POINT('',(143.825,-100.25,1.55)); +#334086 = DIRECTION('',(0.,0.,1.)); +#334087 = DIRECTION('',(1.,0.,-0.)); +#334088 = ORIENTED_EDGE('',*,*,#334072,.F.); +#334089 = ORIENTED_EDGE('',*,*,#334090,.F.); +#334090 = EDGE_CURVE('',#334073,#334073,#334091,.T.); +#334091 = CIRCLE('',#334092,1.275); +#334092 = AXIS2_PLACEMENT_3D('',#334093,#334094,#334095); +#334093 = CARTESIAN_POINT('',(143.825,-100.25,1.51)); +#334094 = DIRECTION('',(0.,0.,1.)); +#334095 = DIRECTION('',(1.,0.,-0.)); +#334096 = CYLINDRICAL_SURFACE('',#334097,1.275); +#334097 = AXIS2_PLACEMENT_3D('',#334098,#334099,#334100); +#334098 = CARTESIAN_POINT('',(143.825,-100.25,1.51)); +#334099 = DIRECTION('',(-0.,-0.,-1.)); +#334100 = DIRECTION('',(1.,0.,-0.)); +#334101 = ADVANCED_FACE('',(#334102,#334105),#334116,.F.); +#334102 = FACE_BOUND('',#334103,.F.); +#334103 = EDGE_LOOP('',(#334104)); +#334104 = ORIENTED_EDGE('',*,*,#334090,.T.); +#334105 = FACE_BOUND('',#334106,.F.); +#334106 = EDGE_LOOP('',(#334107)); +#334107 = ORIENTED_EDGE('',*,*,#334108,.T.); +#334108 = EDGE_CURVE('',#334109,#334109,#334111,.T.); +#334109 = VERTEX_POINT('',#334110); +#334110 = CARTESIAN_POINT('',(143.825,-101.,1.51)); +#334111 = CIRCLE('',#334112,0.75); +#334112 = AXIS2_PLACEMENT_3D('',#334113,#334114,#334115); +#334113 = CARTESIAN_POINT('',(143.825,-100.25,1.51)); +#334114 = DIRECTION('',(-0.,0.,-1.)); +#334115 = DIRECTION('',(-0.,-1.,0.)); +#334116 = PLANE('',#334117); +#334117 = AXIS2_PLACEMENT_3D('',#334118,#334119,#334120); +#334118 = CARTESIAN_POINT('',(0.,0.,1.51)); +#334119 = DIRECTION('',(0.,0.,1.)); +#334120 = DIRECTION('',(1.,0.,-0.)); +#334121 = ADVANCED_FACE('',(#334122,#334125),#334136,.T.); +#334122 = FACE_BOUND('',#334123,.T.); +#334123 = EDGE_LOOP('',(#334124)); +#334124 = ORIENTED_EDGE('',*,*,#334082,.T.); +#334125 = FACE_BOUND('',#334126,.T.); +#334126 = EDGE_LOOP('',(#334127)); +#334127 = ORIENTED_EDGE('',*,*,#334128,.T.); +#334128 = EDGE_CURVE('',#334129,#334129,#334131,.T.); +#334129 = VERTEX_POINT('',#334130); +#334130 = CARTESIAN_POINT('',(143.825,-101.,1.55)); +#334131 = CIRCLE('',#334132,0.75); +#334132 = AXIS2_PLACEMENT_3D('',#334133,#334134,#334135); +#334133 = CARTESIAN_POINT('',(143.825,-100.25,1.55)); +#334134 = DIRECTION('',(-0.,0.,-1.)); +#334135 = DIRECTION('',(-0.,-1.,0.)); +#334136 = PLANE('',#334137); +#334137 = AXIS2_PLACEMENT_3D('',#334138,#334139,#334140); +#334138 = CARTESIAN_POINT('',(0.,0.,1.55)); +#334139 = DIRECTION('',(0.,0.,1.)); +#334140 = DIRECTION('',(1.,0.,-0.)); +#334141 = ADVANCED_FACE('',(#334142),#334153,.F.); +#334142 = FACE_BOUND('',#334143,.T.); +#334143 = EDGE_LOOP('',(#334144,#334145,#334151,#334152)); +#334144 = ORIENTED_EDGE('',*,*,#334108,.T.); +#334145 = ORIENTED_EDGE('',*,*,#334146,.T.); +#334146 = EDGE_CURVE('',#334109,#334129,#334147,.T.); +#334147 = LINE('',#334148,#334149); +#334148 = CARTESIAN_POINT('',(143.825,-101.,-4.6E-02)); +#334149 = VECTOR('',#334150,1.); +#334150 = DIRECTION('',(0.,0.,1.)); +#334151 = ORIENTED_EDGE('',*,*,#334128,.F.); +#334152 = ORIENTED_EDGE('',*,*,#334146,.F.); +#334153 = CYLINDRICAL_SURFACE('',#334154,0.75); +#334154 = AXIS2_PLACEMENT_3D('',#334155,#334156,#334157); +#334155 = CARTESIAN_POINT('',(143.825,-100.25,-4.6E-02)); +#334156 = DIRECTION('',(-0.,-0.,-1.)); +#334157 = DIRECTION('',(-0.,-1.,0.)); +#334158 = MANIFOLD_SOLID_BREP('',#334159); +#334159 = CLOSED_SHELL('',(#334160,#334193,#334213,#334233)); +#334160 = ADVANCED_FACE('',(#334161),#334188,.T.); +#334161 = FACE_BOUND('',#334162,.T.); +#334162 = EDGE_LOOP('',(#334163,#334173,#334180,#334181)); +#334163 = ORIENTED_EDGE('',*,*,#334164,.T.); +#334164 = EDGE_CURVE('',#334165,#334167,#334169,.T.); +#334165 = VERTEX_POINT('',#334166); +#334166 = CARTESIAN_POINT('',(145.1,-100.25,0.)); +#334167 = VERTEX_POINT('',#334168); +#334168 = CARTESIAN_POINT('',(145.1,-100.25,-4.E-02)); +#334169 = LINE('',#334170,#334171); +#334170 = CARTESIAN_POINT('',(145.1,-100.25,0.)); +#334171 = VECTOR('',#334172,1.); +#334172 = DIRECTION('',(0.,0.,-1.)); +#334173 = ORIENTED_EDGE('',*,*,#334174,.T.); +#334174 = EDGE_CURVE('',#334167,#334167,#334175,.T.); +#334175 = CIRCLE('',#334176,1.275); +#334176 = AXIS2_PLACEMENT_3D('',#334177,#334178,#334179); +#334177 = CARTESIAN_POINT('',(143.825,-100.25,-4.E-02)); +#334178 = DIRECTION('',(0.,0.,1.)); +#334179 = DIRECTION('',(1.,0.,-0.)); +#334180 = ORIENTED_EDGE('',*,*,#334164,.F.); +#334181 = ORIENTED_EDGE('',*,*,#334182,.F.); +#334182 = EDGE_CURVE('',#334165,#334165,#334183,.T.); +#334183 = CIRCLE('',#334184,1.275); +#334184 = AXIS2_PLACEMENT_3D('',#334185,#334186,#334187); +#334185 = CARTESIAN_POINT('',(143.825,-100.25,0.)); +#334186 = DIRECTION('',(0.,0.,1.)); +#334187 = DIRECTION('',(1.,0.,-0.)); +#334188 = CYLINDRICAL_SURFACE('',#334189,1.275); +#334189 = AXIS2_PLACEMENT_3D('',#334190,#334191,#334192); +#334190 = CARTESIAN_POINT('',(143.825,-100.25,0.)); +#334191 = DIRECTION('',(0.,0.,1.)); +#334192 = DIRECTION('',(1.,0.,-0.)); +#334193 = ADVANCED_FACE('',(#334194,#334197),#334208,.F.); +#334194 = FACE_BOUND('',#334195,.F.); +#334195 = EDGE_LOOP('',(#334196)); +#334196 = ORIENTED_EDGE('',*,*,#334182,.F.); +#334197 = FACE_BOUND('',#334198,.F.); +#334198 = EDGE_LOOP('',(#334199)); +#334199 = ORIENTED_EDGE('',*,*,#334200,.F.); +#334200 = EDGE_CURVE('',#334201,#334201,#334203,.T.); +#334201 = VERTEX_POINT('',#334202); +#334202 = CARTESIAN_POINT('',(143.825,-101.,0.)); +#334203 = CIRCLE('',#334204,0.75); +#334204 = AXIS2_PLACEMENT_3D('',#334205,#334206,#334207); +#334205 = CARTESIAN_POINT('',(143.825,-100.25,0.)); +#334206 = DIRECTION('',(-0.,0.,-1.)); +#334207 = DIRECTION('',(-0.,-1.,0.)); +#334208 = PLANE('',#334209); +#334209 = AXIS2_PLACEMENT_3D('',#334210,#334211,#334212); +#334210 = CARTESIAN_POINT('',(0.,0.,0.)); +#334211 = DIRECTION('',(-0.,-0.,-1.)); +#334212 = DIRECTION('',(-1.,0.,0.)); +#334213 = ADVANCED_FACE('',(#334214,#334217),#334228,.T.); +#334214 = FACE_BOUND('',#334215,.T.); +#334215 = EDGE_LOOP('',(#334216)); +#334216 = ORIENTED_EDGE('',*,*,#334174,.F.); +#334217 = FACE_BOUND('',#334218,.T.); +#334218 = EDGE_LOOP('',(#334219)); +#334219 = ORIENTED_EDGE('',*,*,#334220,.F.); +#334220 = EDGE_CURVE('',#334221,#334221,#334223,.T.); +#334221 = VERTEX_POINT('',#334222); +#334222 = CARTESIAN_POINT('',(143.825,-101.,-4.E-02)); +#334223 = CIRCLE('',#334224,0.75); +#334224 = AXIS2_PLACEMENT_3D('',#334225,#334226,#334227); +#334225 = CARTESIAN_POINT('',(143.825,-100.25,-4.E-02)); +#334226 = DIRECTION('',(-0.,0.,-1.)); +#334227 = DIRECTION('',(-0.,-1.,0.)); +#334228 = PLANE('',#334229); +#334229 = AXIS2_PLACEMENT_3D('',#334230,#334231,#334232); +#334230 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#334231 = DIRECTION('',(-0.,-0.,-1.)); +#334232 = DIRECTION('',(-1.,0.,0.)); +#334233 = ADVANCED_FACE('',(#334234),#334245,.F.); +#334234 = FACE_BOUND('',#334235,.T.); +#334235 = EDGE_LOOP('',(#334236,#334237,#334243,#334244)); +#334236 = ORIENTED_EDGE('',*,*,#334220,.T.); +#334237 = ORIENTED_EDGE('',*,*,#334238,.T.); +#334238 = EDGE_CURVE('',#334221,#334201,#334239,.T.); +#334239 = LINE('',#334240,#334241); +#334240 = CARTESIAN_POINT('',(143.825,-101.,-4.6E-02)); +#334241 = VECTOR('',#334242,1.); +#334242 = DIRECTION('',(0.,0.,1.)); +#334243 = ORIENTED_EDGE('',*,*,#334200,.F.); +#334244 = ORIENTED_EDGE('',*,*,#334238,.F.); +#334245 = CYLINDRICAL_SURFACE('',#334246,0.75); +#334246 = AXIS2_PLACEMENT_3D('',#334247,#334248,#334249); +#334247 = CARTESIAN_POINT('',(143.825,-100.25,-4.6E-02)); +#334248 = DIRECTION('',(-0.,-0.,-1.)); +#334249 = DIRECTION('',(-0.,-1.,0.)); +#334250 = MANIFOLD_SOLID_BREP('',#334251); +#334251 = CLOSED_SHELL('',(#334252,#334285,#334305,#334325)); +#334252 = ADVANCED_FACE('',(#334253),#334280,.T.); +#334253 = FACE_BOUND('',#334254,.F.); +#334254 = EDGE_LOOP('',(#334255,#334265,#334272,#334273)); +#334255 = ORIENTED_EDGE('',*,*,#334256,.T.); +#334256 = EDGE_CURVE('',#334257,#334259,#334261,.T.); +#334257 = VERTEX_POINT('',#334258); +#334258 = CARTESIAN_POINT('',(143.825,-101.025,-4.E-02)); +#334259 = VERTEX_POINT('',#334260); +#334260 = CARTESIAN_POINT('',(143.825,-101.025,1.55)); +#334261 = LINE('',#334262,#334263); +#334262 = CARTESIAN_POINT('',(143.825,-101.025,-4.E-02)); +#334263 = VECTOR('',#334264,1.); +#334264 = DIRECTION('',(0.,0.,1.)); +#334265 = ORIENTED_EDGE('',*,*,#334266,.T.); +#334266 = EDGE_CURVE('',#334259,#334259,#334267,.T.); +#334267 = CIRCLE('',#334268,0.775); +#334268 = AXIS2_PLACEMENT_3D('',#334269,#334270,#334271); +#334269 = CARTESIAN_POINT('',(143.825,-100.25,1.55)); +#334270 = DIRECTION('',(0.,0.,1.)); +#334271 = DIRECTION('',(-0.,-1.,0.)); +#334272 = ORIENTED_EDGE('',*,*,#334256,.F.); +#334273 = ORIENTED_EDGE('',*,*,#334274,.F.); +#334274 = EDGE_CURVE('',#334257,#334257,#334275,.T.); +#334275 = CIRCLE('',#334276,0.775); +#334276 = AXIS2_PLACEMENT_3D('',#334277,#334278,#334279); +#334277 = CARTESIAN_POINT('',(143.825,-100.25,-4.E-02)); +#334278 = DIRECTION('',(0.,0.,1.)); +#334279 = DIRECTION('',(-0.,-1.,0.)); +#334280 = CYLINDRICAL_SURFACE('',#334281,0.775); +#334281 = AXIS2_PLACEMENT_3D('',#334282,#334283,#334284); +#334282 = CARTESIAN_POINT('',(143.825,-100.25,-4.E-02)); +#334283 = DIRECTION('',(-0.,-0.,-1.)); +#334284 = DIRECTION('',(-0.,-1.,0.)); +#334285 = ADVANCED_FACE('',(#334286,#334289),#334300,.F.); +#334286 = FACE_BOUND('',#334287,.F.); +#334287 = EDGE_LOOP('',(#334288)); +#334288 = ORIENTED_EDGE('',*,*,#334274,.T.); +#334289 = FACE_BOUND('',#334290,.F.); +#334290 = EDGE_LOOP('',(#334291)); +#334291 = ORIENTED_EDGE('',*,*,#334292,.T.); +#334292 = EDGE_CURVE('',#334293,#334293,#334295,.T.); +#334293 = VERTEX_POINT('',#334294); +#334294 = CARTESIAN_POINT('',(143.825,-101.,-4.E-02)); +#334295 = CIRCLE('',#334296,0.75); +#334296 = AXIS2_PLACEMENT_3D('',#334297,#334298,#334299); +#334297 = CARTESIAN_POINT('',(143.825,-100.25,-4.E-02)); +#334298 = DIRECTION('',(-0.,0.,-1.)); +#334299 = DIRECTION('',(-0.,-1.,0.)); +#334300 = PLANE('',#334301); +#334301 = AXIS2_PLACEMENT_3D('',#334302,#334303,#334304); +#334302 = CARTESIAN_POINT('',(143.825,-101.025,-4.E-02)); +#334303 = DIRECTION('',(0.,0.,1.)); +#334304 = DIRECTION('',(1.,0.,-0.)); +#334305 = ADVANCED_FACE('',(#334306,#334309),#334320,.T.); +#334306 = FACE_BOUND('',#334307,.T.); +#334307 = EDGE_LOOP('',(#334308)); +#334308 = ORIENTED_EDGE('',*,*,#334266,.T.); +#334309 = FACE_BOUND('',#334310,.T.); +#334310 = EDGE_LOOP('',(#334311)); +#334311 = ORIENTED_EDGE('',*,*,#334312,.T.); +#334312 = EDGE_CURVE('',#334313,#334313,#334315,.T.); +#334313 = VERTEX_POINT('',#334314); +#334314 = CARTESIAN_POINT('',(143.825,-101.,1.55)); +#334315 = CIRCLE('',#334316,0.75); +#334316 = AXIS2_PLACEMENT_3D('',#334317,#334318,#334319); +#334317 = CARTESIAN_POINT('',(143.825,-100.25,1.55)); +#334318 = DIRECTION('',(-0.,0.,-1.)); +#334319 = DIRECTION('',(-0.,-1.,0.)); +#334320 = PLANE('',#334321); +#334321 = AXIS2_PLACEMENT_3D('',#334322,#334323,#334324); +#334322 = CARTESIAN_POINT('',(143.825,-101.025,1.55)); +#334323 = DIRECTION('',(0.,0.,1.)); +#334324 = DIRECTION('',(1.,0.,-0.)); +#334325 = ADVANCED_FACE('',(#334326),#334337,.F.); +#334326 = FACE_BOUND('',#334327,.T.); +#334327 = EDGE_LOOP('',(#334328,#334329,#334335,#334336)); +#334328 = ORIENTED_EDGE('',*,*,#334292,.T.); +#334329 = ORIENTED_EDGE('',*,*,#334330,.T.); +#334330 = EDGE_CURVE('',#334293,#334313,#334331,.T.); +#334331 = LINE('',#334332,#334333); +#334332 = CARTESIAN_POINT('',(143.825,-101.,-4.6E-02)); +#334333 = VECTOR('',#334334,1.); +#334334 = DIRECTION('',(0.,0.,1.)); +#334335 = ORIENTED_EDGE('',*,*,#334312,.F.); +#334336 = ORIENTED_EDGE('',*,*,#334330,.F.); +#334337 = CYLINDRICAL_SURFACE('',#334338,0.75); +#334338 = AXIS2_PLACEMENT_3D('',#334339,#334340,#334341); +#334339 = CARTESIAN_POINT('',(143.825,-100.25,-4.6E-02)); +#334340 = DIRECTION('',(-0.,-0.,-1.)); +#334341 = DIRECTION('',(-0.,-1.,0.)); +#334342 = MANIFOLD_SOLID_BREP('',#334343); +#334343 = CLOSED_SHELL('',(#334344,#334377,#334397,#334417)); +#334344 = ADVANCED_FACE('',(#334345),#334372,.T.); +#334345 = FACE_BOUND('',#334346,.F.); +#334346 = EDGE_LOOP('',(#334347,#334357,#334364,#334365)); +#334347 = ORIENTED_EDGE('',*,*,#334348,.T.); +#334348 = EDGE_CURVE('',#334349,#334351,#334353,.T.); +#334349 = VERTEX_POINT('',#334350); +#334350 = CARTESIAN_POINT('',(141.874999,-101.,1.51)); +#334351 = VERTEX_POINT('',#334352); +#334352 = CARTESIAN_POINT('',(141.874999,-101.,1.55)); +#334353 = LINE('',#334354,#334355); +#334354 = CARTESIAN_POINT('',(141.874999,-101.,1.51)); +#334355 = VECTOR('',#334356,1.); +#334356 = DIRECTION('',(0.,0.,1.)); +#334357 = ORIENTED_EDGE('',*,*,#334358,.T.); +#334358 = EDGE_CURVE('',#334351,#334351,#334359,.T.); +#334359 = CIRCLE('',#334360,1.124999); +#334360 = AXIS2_PLACEMENT_3D('',#334361,#334362,#334363); +#334361 = CARTESIAN_POINT('',(140.75,-101.,1.55)); +#334362 = DIRECTION('',(0.,0.,1.)); +#334363 = DIRECTION('',(1.,0.,-0.)); +#334364 = ORIENTED_EDGE('',*,*,#334348,.F.); +#334365 = ORIENTED_EDGE('',*,*,#334366,.F.); +#334366 = EDGE_CURVE('',#334349,#334349,#334367,.T.); +#334367 = CIRCLE('',#334368,1.124999); +#334368 = AXIS2_PLACEMENT_3D('',#334369,#334370,#334371); +#334369 = CARTESIAN_POINT('',(140.75,-101.,1.51)); +#334370 = DIRECTION('',(0.,0.,1.)); +#334371 = DIRECTION('',(1.,0.,-0.)); +#334372 = CYLINDRICAL_SURFACE('',#334373,1.124999); +#334373 = AXIS2_PLACEMENT_3D('',#334374,#334375,#334376); +#334374 = CARTESIAN_POINT('',(140.75,-101.,1.51)); +#334375 = DIRECTION('',(-0.,-0.,-1.)); +#334376 = DIRECTION('',(1.,0.,-0.)); +#334377 = ADVANCED_FACE('',(#334378,#334381),#334392,.F.); +#334378 = FACE_BOUND('',#334379,.F.); +#334379 = EDGE_LOOP('',(#334380)); +#334380 = ORIENTED_EDGE('',*,*,#334366,.T.); +#334381 = FACE_BOUND('',#334382,.F.); +#334382 = EDGE_LOOP('',(#334383)); +#334383 = ORIENTED_EDGE('',*,*,#334384,.T.); +#334384 = EDGE_CURVE('',#334385,#334385,#334387,.T.); +#334385 = VERTEX_POINT('',#334386); +#334386 = CARTESIAN_POINT('',(140.75,-101.6,1.51)); +#334387 = CIRCLE('',#334388,0.6); +#334388 = AXIS2_PLACEMENT_3D('',#334389,#334390,#334391); +#334389 = CARTESIAN_POINT('',(140.75,-101.,1.51)); +#334390 = DIRECTION('',(-0.,0.,-1.)); +#334391 = DIRECTION('',(-0.,-1.,0.)); +#334392 = PLANE('',#334393); +#334393 = AXIS2_PLACEMENT_3D('',#334394,#334395,#334396); +#334394 = CARTESIAN_POINT('',(0.,0.,1.51)); +#334395 = DIRECTION('',(0.,0.,1.)); +#334396 = DIRECTION('',(1.,0.,-0.)); +#334397 = ADVANCED_FACE('',(#334398,#334401),#334412,.T.); +#334398 = FACE_BOUND('',#334399,.T.); +#334399 = EDGE_LOOP('',(#334400)); +#334400 = ORIENTED_EDGE('',*,*,#334358,.T.); +#334401 = FACE_BOUND('',#334402,.T.); +#334402 = EDGE_LOOP('',(#334403)); +#334403 = ORIENTED_EDGE('',*,*,#334404,.T.); +#334404 = EDGE_CURVE('',#334405,#334405,#334407,.T.); +#334405 = VERTEX_POINT('',#334406); +#334406 = CARTESIAN_POINT('',(140.75,-101.6,1.55)); +#334407 = CIRCLE('',#334408,0.6); +#334408 = AXIS2_PLACEMENT_3D('',#334409,#334410,#334411); +#334409 = CARTESIAN_POINT('',(140.75,-101.,1.55)); +#334410 = DIRECTION('',(-0.,0.,-1.)); +#334411 = DIRECTION('',(-0.,-1.,0.)); +#334412 = PLANE('',#334413); +#334413 = AXIS2_PLACEMENT_3D('',#334414,#334415,#334416); +#334414 = CARTESIAN_POINT('',(0.,0.,1.55)); +#334415 = DIRECTION('',(0.,0.,1.)); +#334416 = DIRECTION('',(1.,0.,-0.)); +#334417 = ADVANCED_FACE('',(#334418),#334429,.F.); +#334418 = FACE_BOUND('',#334419,.T.); +#334419 = EDGE_LOOP('',(#334420,#334421,#334427,#334428)); +#334420 = ORIENTED_EDGE('',*,*,#334384,.T.); +#334421 = ORIENTED_EDGE('',*,*,#334422,.T.); +#334422 = EDGE_CURVE('',#334385,#334405,#334423,.T.); +#334423 = LINE('',#334424,#334425); +#334424 = CARTESIAN_POINT('',(140.75,-101.6,-4.6E-02)); +#334425 = VECTOR('',#334426,1.); +#334426 = DIRECTION('',(0.,0.,1.)); +#334427 = ORIENTED_EDGE('',*,*,#334404,.F.); +#334428 = ORIENTED_EDGE('',*,*,#334422,.F.); +#334429 = CYLINDRICAL_SURFACE('',#334430,0.6); +#334430 = AXIS2_PLACEMENT_3D('',#334431,#334432,#334433); +#334431 = CARTESIAN_POINT('',(140.75,-101.,-4.6E-02)); +#334432 = DIRECTION('',(-0.,-0.,-1.)); +#334433 = DIRECTION('',(-0.,-1.,0.)); +#334434 = MANIFOLD_SOLID_BREP('',#334435); +#334435 = CLOSED_SHELL('',(#334436,#334469,#334489,#334509)); +#334436 = ADVANCED_FACE('',(#334437),#334464,.T.); +#334437 = FACE_BOUND('',#334438,.T.); +#334438 = EDGE_LOOP('',(#334439,#334449,#334456,#334457)); +#334439 = ORIENTED_EDGE('',*,*,#334440,.T.); +#334440 = EDGE_CURVE('',#334441,#334443,#334445,.T.); +#334441 = VERTEX_POINT('',#334442); +#334442 = CARTESIAN_POINT('',(141.874999,-101.,0.)); +#334443 = VERTEX_POINT('',#334444); +#334444 = CARTESIAN_POINT('',(141.874999,-101.,-4.E-02)); +#334445 = LINE('',#334446,#334447); +#334446 = CARTESIAN_POINT('',(141.874999,-101.,0.)); +#334447 = VECTOR('',#334448,1.); +#334448 = DIRECTION('',(0.,0.,-1.)); +#334449 = ORIENTED_EDGE('',*,*,#334450,.T.); +#334450 = EDGE_CURVE('',#334443,#334443,#334451,.T.); +#334451 = CIRCLE('',#334452,1.124999); +#334452 = AXIS2_PLACEMENT_3D('',#334453,#334454,#334455); +#334453 = CARTESIAN_POINT('',(140.75,-101.,-4.E-02)); +#334454 = DIRECTION('',(0.,0.,1.)); +#334455 = DIRECTION('',(1.,0.,-0.)); +#334456 = ORIENTED_EDGE('',*,*,#334440,.F.); +#334457 = ORIENTED_EDGE('',*,*,#334458,.F.); +#334458 = EDGE_CURVE('',#334441,#334441,#334459,.T.); +#334459 = CIRCLE('',#334460,1.124999); +#334460 = AXIS2_PLACEMENT_3D('',#334461,#334462,#334463); +#334461 = CARTESIAN_POINT('',(140.75,-101.,0.)); +#334462 = DIRECTION('',(0.,0.,1.)); +#334463 = DIRECTION('',(1.,0.,-0.)); +#334464 = CYLINDRICAL_SURFACE('',#334465,1.124999); +#334465 = AXIS2_PLACEMENT_3D('',#334466,#334467,#334468); +#334466 = CARTESIAN_POINT('',(140.75,-101.,0.)); +#334467 = DIRECTION('',(0.,0.,1.)); +#334468 = DIRECTION('',(1.,0.,-0.)); +#334469 = ADVANCED_FACE('',(#334470,#334473),#334484,.F.); +#334470 = FACE_BOUND('',#334471,.F.); +#334471 = EDGE_LOOP('',(#334472)); +#334472 = ORIENTED_EDGE('',*,*,#334458,.F.); +#334473 = FACE_BOUND('',#334474,.F.); +#334474 = EDGE_LOOP('',(#334475)); +#334475 = ORIENTED_EDGE('',*,*,#334476,.F.); +#334476 = EDGE_CURVE('',#334477,#334477,#334479,.T.); +#334477 = VERTEX_POINT('',#334478); +#334478 = CARTESIAN_POINT('',(140.75,-101.6,0.)); +#334479 = CIRCLE('',#334480,0.6); +#334480 = AXIS2_PLACEMENT_3D('',#334481,#334482,#334483); +#334481 = CARTESIAN_POINT('',(140.75,-101.,0.)); +#334482 = DIRECTION('',(-0.,0.,-1.)); +#334483 = DIRECTION('',(-0.,-1.,0.)); +#334484 = PLANE('',#334485); +#334485 = AXIS2_PLACEMENT_3D('',#334486,#334487,#334488); +#334486 = CARTESIAN_POINT('',(0.,0.,0.)); +#334487 = DIRECTION('',(-0.,-0.,-1.)); +#334488 = DIRECTION('',(-1.,0.,0.)); +#334489 = ADVANCED_FACE('',(#334490,#334493),#334504,.T.); +#334490 = FACE_BOUND('',#334491,.T.); +#334491 = EDGE_LOOP('',(#334492)); +#334492 = ORIENTED_EDGE('',*,*,#334450,.F.); +#334493 = FACE_BOUND('',#334494,.T.); +#334494 = EDGE_LOOP('',(#334495)); +#334495 = ORIENTED_EDGE('',*,*,#334496,.F.); +#334496 = EDGE_CURVE('',#334497,#334497,#334499,.T.); +#334497 = VERTEX_POINT('',#334498); +#334498 = CARTESIAN_POINT('',(140.75,-101.6,-4.E-02)); +#334499 = CIRCLE('',#334500,0.6); +#334500 = AXIS2_PLACEMENT_3D('',#334501,#334502,#334503); +#334501 = CARTESIAN_POINT('',(140.75,-101.,-4.E-02)); +#334502 = DIRECTION('',(-0.,0.,-1.)); +#334503 = DIRECTION('',(-0.,-1.,0.)); +#334504 = PLANE('',#334505); +#334505 = AXIS2_PLACEMENT_3D('',#334506,#334507,#334508); +#334506 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#334507 = DIRECTION('',(-0.,-0.,-1.)); +#334508 = DIRECTION('',(-1.,0.,0.)); +#334509 = ADVANCED_FACE('',(#334510),#334521,.F.); +#334510 = FACE_BOUND('',#334511,.T.); +#334511 = EDGE_LOOP('',(#334512,#334513,#334519,#334520)); +#334512 = ORIENTED_EDGE('',*,*,#334496,.T.); +#334513 = ORIENTED_EDGE('',*,*,#334514,.T.); +#334514 = EDGE_CURVE('',#334497,#334477,#334515,.T.); +#334515 = LINE('',#334516,#334517); +#334516 = CARTESIAN_POINT('',(140.75,-101.6,-4.6E-02)); +#334517 = VECTOR('',#334518,1.); +#334518 = DIRECTION('',(0.,0.,1.)); +#334519 = ORIENTED_EDGE('',*,*,#334476,.F.); +#334520 = ORIENTED_EDGE('',*,*,#334514,.F.); +#334521 = CYLINDRICAL_SURFACE('',#334522,0.6); +#334522 = AXIS2_PLACEMENT_3D('',#334523,#334524,#334525); +#334523 = CARTESIAN_POINT('',(140.75,-101.,-4.6E-02)); +#334524 = DIRECTION('',(-0.,-0.,-1.)); +#334525 = DIRECTION('',(-0.,-1.,0.)); +#334526 = MANIFOLD_SOLID_BREP('',#334527); +#334527 = CLOSED_SHELL('',(#334528,#334561,#334581,#334601)); +#334528 = ADVANCED_FACE('',(#334529),#334556,.T.); +#334529 = FACE_BOUND('',#334530,.F.); +#334530 = EDGE_LOOP('',(#334531,#334541,#334548,#334549)); +#334531 = ORIENTED_EDGE('',*,*,#334532,.T.); +#334532 = EDGE_CURVE('',#334533,#334535,#334537,.T.); +#334533 = VERTEX_POINT('',#334534); +#334534 = CARTESIAN_POINT('',(140.75,-101.625,-4.E-02)); +#334535 = VERTEX_POINT('',#334536); +#334536 = CARTESIAN_POINT('',(140.75,-101.625,1.55)); +#334537 = LINE('',#334538,#334539); +#334538 = CARTESIAN_POINT('',(140.75,-101.625,-4.E-02)); +#334539 = VECTOR('',#334540,1.); +#334540 = DIRECTION('',(0.,0.,1.)); +#334541 = ORIENTED_EDGE('',*,*,#334542,.T.); +#334542 = EDGE_CURVE('',#334535,#334535,#334543,.T.); +#334543 = CIRCLE('',#334544,0.625); +#334544 = AXIS2_PLACEMENT_3D('',#334545,#334546,#334547); +#334545 = CARTESIAN_POINT('',(140.75,-101.,1.55)); +#334546 = DIRECTION('',(0.,0.,1.)); +#334547 = DIRECTION('',(-0.,-1.,0.)); +#334548 = ORIENTED_EDGE('',*,*,#334532,.F.); +#334549 = ORIENTED_EDGE('',*,*,#334550,.F.); +#334550 = EDGE_CURVE('',#334533,#334533,#334551,.T.); +#334551 = CIRCLE('',#334552,0.625); +#334552 = AXIS2_PLACEMENT_3D('',#334553,#334554,#334555); +#334553 = CARTESIAN_POINT('',(140.75,-101.,-4.E-02)); +#334554 = DIRECTION('',(0.,0.,1.)); +#334555 = DIRECTION('',(-0.,-1.,0.)); +#334556 = CYLINDRICAL_SURFACE('',#334557,0.625); +#334557 = AXIS2_PLACEMENT_3D('',#334558,#334559,#334560); +#334558 = CARTESIAN_POINT('',(140.75,-101.,-4.E-02)); +#334559 = DIRECTION('',(-0.,-0.,-1.)); +#334560 = DIRECTION('',(-0.,-1.,0.)); +#334561 = ADVANCED_FACE('',(#334562,#334565),#334576,.F.); +#334562 = FACE_BOUND('',#334563,.F.); +#334563 = EDGE_LOOP('',(#334564)); +#334564 = ORIENTED_EDGE('',*,*,#334550,.T.); +#334565 = FACE_BOUND('',#334566,.F.); +#334566 = EDGE_LOOP('',(#334567)); +#334567 = ORIENTED_EDGE('',*,*,#334568,.T.); +#334568 = EDGE_CURVE('',#334569,#334569,#334571,.T.); +#334569 = VERTEX_POINT('',#334570); +#334570 = CARTESIAN_POINT('',(140.75,-101.6,-4.E-02)); +#334571 = CIRCLE('',#334572,0.6); +#334572 = AXIS2_PLACEMENT_3D('',#334573,#334574,#334575); +#334573 = CARTESIAN_POINT('',(140.75,-101.,-4.E-02)); +#334574 = DIRECTION('',(-0.,0.,-1.)); +#334575 = DIRECTION('',(-0.,-1.,0.)); +#334576 = PLANE('',#334577); +#334577 = AXIS2_PLACEMENT_3D('',#334578,#334579,#334580); +#334578 = CARTESIAN_POINT('',(140.75,-101.625,-4.E-02)); +#334579 = DIRECTION('',(0.,0.,1.)); +#334580 = DIRECTION('',(1.,0.,-0.)); +#334581 = ADVANCED_FACE('',(#334582,#334585),#334596,.T.); +#334582 = FACE_BOUND('',#334583,.T.); +#334583 = EDGE_LOOP('',(#334584)); +#334584 = ORIENTED_EDGE('',*,*,#334542,.T.); +#334585 = FACE_BOUND('',#334586,.T.); +#334586 = EDGE_LOOP('',(#334587)); +#334587 = ORIENTED_EDGE('',*,*,#334588,.T.); +#334588 = EDGE_CURVE('',#334589,#334589,#334591,.T.); +#334589 = VERTEX_POINT('',#334590); +#334590 = CARTESIAN_POINT('',(140.75,-101.6,1.55)); +#334591 = CIRCLE('',#334592,0.6); +#334592 = AXIS2_PLACEMENT_3D('',#334593,#334594,#334595); +#334593 = CARTESIAN_POINT('',(140.75,-101.,1.55)); +#334594 = DIRECTION('',(-0.,0.,-1.)); +#334595 = DIRECTION('',(-0.,-1.,0.)); +#334596 = PLANE('',#334597); +#334597 = AXIS2_PLACEMENT_3D('',#334598,#334599,#334600); +#334598 = CARTESIAN_POINT('',(140.75,-101.625,1.55)); +#334599 = DIRECTION('',(0.,0.,1.)); +#334600 = DIRECTION('',(1.,0.,-0.)); +#334601 = ADVANCED_FACE('',(#334602),#334613,.F.); +#334602 = FACE_BOUND('',#334603,.T.); +#334603 = EDGE_LOOP('',(#334604,#334605,#334611,#334612)); +#334604 = ORIENTED_EDGE('',*,*,#334568,.T.); +#334605 = ORIENTED_EDGE('',*,*,#334606,.T.); +#334606 = EDGE_CURVE('',#334569,#334589,#334607,.T.); +#334607 = LINE('',#334608,#334609); +#334608 = CARTESIAN_POINT('',(140.75,-101.6,-4.6E-02)); +#334609 = VECTOR('',#334610,1.); +#334610 = DIRECTION('',(0.,0.,1.)); +#334611 = ORIENTED_EDGE('',*,*,#334588,.F.); +#334612 = ORIENTED_EDGE('',*,*,#334606,.F.); +#334613 = CYLINDRICAL_SURFACE('',#334614,0.6); +#334614 = AXIS2_PLACEMENT_3D('',#334615,#334616,#334617); +#334615 = CARTESIAN_POINT('',(140.75,-101.,-4.6E-02)); +#334616 = DIRECTION('',(-0.,-0.,-1.)); +#334617 = DIRECTION('',(-0.,-1.,0.)); +#334618 = MANIFOLD_SOLID_BREP('',#334619); +#334619 = CLOSED_SHELL('',(#334620,#334653,#334673,#334693)); +#334620 = ADVANCED_FACE('',(#334621),#334648,.T.); +#334621 = FACE_BOUND('',#334622,.F.); +#334622 = EDGE_LOOP('',(#334623,#334633,#334640,#334641)); +#334623 = ORIENTED_EDGE('',*,*,#334624,.T.); +#334624 = EDGE_CURVE('',#334625,#334627,#334629,.T.); +#334625 = VERTEX_POINT('',#334626); +#334626 = CARTESIAN_POINT('',(141.874999,-105.5,1.51)); +#334627 = VERTEX_POINT('',#334628); +#334628 = CARTESIAN_POINT('',(141.874999,-105.5,1.55)); +#334629 = LINE('',#334630,#334631); +#334630 = CARTESIAN_POINT('',(141.874999,-105.5,1.51)); +#334631 = VECTOR('',#334632,1.); +#334632 = DIRECTION('',(0.,0.,1.)); +#334633 = ORIENTED_EDGE('',*,*,#334634,.T.); +#334634 = EDGE_CURVE('',#334627,#334627,#334635,.T.); +#334635 = CIRCLE('',#334636,1.124999); +#334636 = AXIS2_PLACEMENT_3D('',#334637,#334638,#334639); +#334637 = CARTESIAN_POINT('',(140.75,-105.5,1.55)); +#334638 = DIRECTION('',(0.,0.,1.)); +#334639 = DIRECTION('',(1.,0.,-0.)); +#334640 = ORIENTED_EDGE('',*,*,#334624,.F.); +#334641 = ORIENTED_EDGE('',*,*,#334642,.F.); +#334642 = EDGE_CURVE('',#334625,#334625,#334643,.T.); +#334643 = CIRCLE('',#334644,1.124999); +#334644 = AXIS2_PLACEMENT_3D('',#334645,#334646,#334647); +#334645 = CARTESIAN_POINT('',(140.75,-105.5,1.51)); +#334646 = DIRECTION('',(0.,0.,1.)); +#334647 = DIRECTION('',(1.,0.,-0.)); +#334648 = CYLINDRICAL_SURFACE('',#334649,1.124999); +#334649 = AXIS2_PLACEMENT_3D('',#334650,#334651,#334652); +#334650 = CARTESIAN_POINT('',(140.75,-105.5,1.51)); +#334651 = DIRECTION('',(-0.,-0.,-1.)); +#334652 = DIRECTION('',(1.,0.,-0.)); +#334653 = ADVANCED_FACE('',(#334654,#334657),#334668,.F.); +#334654 = FACE_BOUND('',#334655,.F.); +#334655 = EDGE_LOOP('',(#334656)); +#334656 = ORIENTED_EDGE('',*,*,#334642,.T.); +#334657 = FACE_BOUND('',#334658,.F.); +#334658 = EDGE_LOOP('',(#334659)); +#334659 = ORIENTED_EDGE('',*,*,#334660,.T.); +#334660 = EDGE_CURVE('',#334661,#334661,#334663,.T.); +#334661 = VERTEX_POINT('',#334662); +#334662 = CARTESIAN_POINT('',(140.75,-106.1,1.51)); +#334663 = CIRCLE('',#334664,0.6); +#334664 = AXIS2_PLACEMENT_3D('',#334665,#334666,#334667); +#334665 = CARTESIAN_POINT('',(140.75,-105.5,1.51)); +#334666 = DIRECTION('',(-0.,0.,-1.)); +#334667 = DIRECTION('',(-0.,-1.,0.)); +#334668 = PLANE('',#334669); +#334669 = AXIS2_PLACEMENT_3D('',#334670,#334671,#334672); +#334670 = CARTESIAN_POINT('',(0.,0.,1.51)); +#334671 = DIRECTION('',(0.,0.,1.)); +#334672 = DIRECTION('',(1.,0.,-0.)); +#334673 = ADVANCED_FACE('',(#334674,#334677),#334688,.T.); +#334674 = FACE_BOUND('',#334675,.T.); +#334675 = EDGE_LOOP('',(#334676)); +#334676 = ORIENTED_EDGE('',*,*,#334634,.T.); +#334677 = FACE_BOUND('',#334678,.T.); +#334678 = EDGE_LOOP('',(#334679)); +#334679 = ORIENTED_EDGE('',*,*,#334680,.T.); +#334680 = EDGE_CURVE('',#334681,#334681,#334683,.T.); +#334681 = VERTEX_POINT('',#334682); +#334682 = CARTESIAN_POINT('',(140.75,-106.1,1.55)); +#334683 = CIRCLE('',#334684,0.6); +#334684 = AXIS2_PLACEMENT_3D('',#334685,#334686,#334687); +#334685 = CARTESIAN_POINT('',(140.75,-105.5,1.55)); +#334686 = DIRECTION('',(-0.,0.,-1.)); +#334687 = DIRECTION('',(-0.,-1.,0.)); +#334688 = PLANE('',#334689); +#334689 = AXIS2_PLACEMENT_3D('',#334690,#334691,#334692); +#334690 = CARTESIAN_POINT('',(0.,0.,1.55)); +#334691 = DIRECTION('',(0.,0.,1.)); +#334692 = DIRECTION('',(1.,0.,-0.)); +#334693 = ADVANCED_FACE('',(#334694),#334705,.F.); +#334694 = FACE_BOUND('',#334695,.T.); +#334695 = EDGE_LOOP('',(#334696,#334697,#334703,#334704)); +#334696 = ORIENTED_EDGE('',*,*,#334660,.T.); +#334697 = ORIENTED_EDGE('',*,*,#334698,.T.); +#334698 = EDGE_CURVE('',#334661,#334681,#334699,.T.); +#334699 = LINE('',#334700,#334701); +#334700 = CARTESIAN_POINT('',(140.75,-106.1,-4.6E-02)); +#334701 = VECTOR('',#334702,1.); +#334702 = DIRECTION('',(0.,0.,1.)); +#334703 = ORIENTED_EDGE('',*,*,#334680,.F.); +#334704 = ORIENTED_EDGE('',*,*,#334698,.F.); +#334705 = CYLINDRICAL_SURFACE('',#334706,0.6); +#334706 = AXIS2_PLACEMENT_3D('',#334707,#334708,#334709); +#334707 = CARTESIAN_POINT('',(140.75,-105.5,-4.6E-02)); +#334708 = DIRECTION('',(-0.,-0.,-1.)); +#334709 = DIRECTION('',(-0.,-1.,0.)); +#334710 = MANIFOLD_SOLID_BREP('',#334711); +#334711 = CLOSED_SHELL('',(#334712,#334745,#334765,#334785)); +#334712 = ADVANCED_FACE('',(#334713),#334740,.T.); +#334713 = FACE_BOUND('',#334714,.T.); +#334714 = EDGE_LOOP('',(#334715,#334725,#334732,#334733)); +#334715 = ORIENTED_EDGE('',*,*,#334716,.T.); +#334716 = EDGE_CURVE('',#334717,#334719,#334721,.T.); +#334717 = VERTEX_POINT('',#334718); +#334718 = CARTESIAN_POINT('',(141.874999,-105.5,0.)); +#334719 = VERTEX_POINT('',#334720); +#334720 = CARTESIAN_POINT('',(141.874999,-105.5,-4.E-02)); +#334721 = LINE('',#334722,#334723); +#334722 = CARTESIAN_POINT('',(141.874999,-105.5,0.)); +#334723 = VECTOR('',#334724,1.); +#334724 = DIRECTION('',(0.,0.,-1.)); +#334725 = ORIENTED_EDGE('',*,*,#334726,.T.); +#334726 = EDGE_CURVE('',#334719,#334719,#334727,.T.); +#334727 = CIRCLE('',#334728,1.124999); +#334728 = AXIS2_PLACEMENT_3D('',#334729,#334730,#334731); +#334729 = CARTESIAN_POINT('',(140.75,-105.5,-4.E-02)); +#334730 = DIRECTION('',(0.,0.,1.)); +#334731 = DIRECTION('',(1.,0.,-0.)); +#334732 = ORIENTED_EDGE('',*,*,#334716,.F.); +#334733 = ORIENTED_EDGE('',*,*,#334734,.F.); +#334734 = EDGE_CURVE('',#334717,#334717,#334735,.T.); +#334735 = CIRCLE('',#334736,1.124999); +#334736 = AXIS2_PLACEMENT_3D('',#334737,#334738,#334739); +#334737 = CARTESIAN_POINT('',(140.75,-105.5,0.)); +#334738 = DIRECTION('',(0.,0.,1.)); +#334739 = DIRECTION('',(1.,0.,-0.)); +#334740 = CYLINDRICAL_SURFACE('',#334741,1.124999); +#334741 = AXIS2_PLACEMENT_3D('',#334742,#334743,#334744); +#334742 = CARTESIAN_POINT('',(140.75,-105.5,0.)); +#334743 = DIRECTION('',(0.,0.,1.)); +#334744 = DIRECTION('',(1.,0.,-0.)); +#334745 = ADVANCED_FACE('',(#334746,#334749),#334760,.F.); +#334746 = FACE_BOUND('',#334747,.F.); +#334747 = EDGE_LOOP('',(#334748)); +#334748 = ORIENTED_EDGE('',*,*,#334734,.F.); +#334749 = FACE_BOUND('',#334750,.F.); +#334750 = EDGE_LOOP('',(#334751)); +#334751 = ORIENTED_EDGE('',*,*,#334752,.F.); +#334752 = EDGE_CURVE('',#334753,#334753,#334755,.T.); +#334753 = VERTEX_POINT('',#334754); +#334754 = CARTESIAN_POINT('',(140.75,-106.1,0.)); +#334755 = CIRCLE('',#334756,0.6); +#334756 = AXIS2_PLACEMENT_3D('',#334757,#334758,#334759); +#334757 = CARTESIAN_POINT('',(140.75,-105.5,0.)); +#334758 = DIRECTION('',(-0.,0.,-1.)); +#334759 = DIRECTION('',(-0.,-1.,0.)); +#334760 = PLANE('',#334761); +#334761 = AXIS2_PLACEMENT_3D('',#334762,#334763,#334764); +#334762 = CARTESIAN_POINT('',(0.,0.,0.)); +#334763 = DIRECTION('',(-0.,-0.,-1.)); +#334764 = DIRECTION('',(-1.,0.,0.)); +#334765 = ADVANCED_FACE('',(#334766,#334769),#334780,.T.); +#334766 = FACE_BOUND('',#334767,.T.); +#334767 = EDGE_LOOP('',(#334768)); +#334768 = ORIENTED_EDGE('',*,*,#334726,.F.); +#334769 = FACE_BOUND('',#334770,.T.); +#334770 = EDGE_LOOP('',(#334771)); +#334771 = ORIENTED_EDGE('',*,*,#334772,.F.); +#334772 = EDGE_CURVE('',#334773,#334773,#334775,.T.); +#334773 = VERTEX_POINT('',#334774); +#334774 = CARTESIAN_POINT('',(140.75,-106.1,-4.E-02)); +#334775 = CIRCLE('',#334776,0.6); +#334776 = AXIS2_PLACEMENT_3D('',#334777,#334778,#334779); +#334777 = CARTESIAN_POINT('',(140.75,-105.5,-4.E-02)); +#334778 = DIRECTION('',(-0.,0.,-1.)); +#334779 = DIRECTION('',(-0.,-1.,0.)); +#334780 = PLANE('',#334781); +#334781 = AXIS2_PLACEMENT_3D('',#334782,#334783,#334784); +#334782 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#334783 = DIRECTION('',(-0.,-0.,-1.)); +#334784 = DIRECTION('',(-1.,0.,0.)); +#334785 = ADVANCED_FACE('',(#334786),#334797,.F.); +#334786 = FACE_BOUND('',#334787,.T.); +#334787 = EDGE_LOOP('',(#334788,#334789,#334795,#334796)); +#334788 = ORIENTED_EDGE('',*,*,#334772,.T.); +#334789 = ORIENTED_EDGE('',*,*,#334790,.T.); +#334790 = EDGE_CURVE('',#334773,#334753,#334791,.T.); +#334791 = LINE('',#334792,#334793); +#334792 = CARTESIAN_POINT('',(140.75,-106.1,-4.6E-02)); +#334793 = VECTOR('',#334794,1.); +#334794 = DIRECTION('',(0.,0.,1.)); +#334795 = ORIENTED_EDGE('',*,*,#334752,.F.); +#334796 = ORIENTED_EDGE('',*,*,#334790,.F.); +#334797 = CYLINDRICAL_SURFACE('',#334798,0.6); +#334798 = AXIS2_PLACEMENT_3D('',#334799,#334800,#334801); +#334799 = CARTESIAN_POINT('',(140.75,-105.5,-4.6E-02)); +#334800 = DIRECTION('',(-0.,-0.,-1.)); +#334801 = DIRECTION('',(-0.,-1.,0.)); +#334802 = MANIFOLD_SOLID_BREP('',#334803); +#334803 = CLOSED_SHELL('',(#334804,#334837,#334857,#334877)); +#334804 = ADVANCED_FACE('',(#334805),#334832,.T.); +#334805 = FACE_BOUND('',#334806,.F.); +#334806 = EDGE_LOOP('',(#334807,#334817,#334824,#334825)); +#334807 = ORIENTED_EDGE('',*,*,#334808,.T.); +#334808 = EDGE_CURVE('',#334809,#334811,#334813,.T.); +#334809 = VERTEX_POINT('',#334810); +#334810 = CARTESIAN_POINT('',(140.75,-106.125,-4.E-02)); +#334811 = VERTEX_POINT('',#334812); +#334812 = CARTESIAN_POINT('',(140.75,-106.125,1.55)); +#334813 = LINE('',#334814,#334815); +#334814 = CARTESIAN_POINT('',(140.75,-106.125,-4.E-02)); +#334815 = VECTOR('',#334816,1.); +#334816 = DIRECTION('',(0.,0.,1.)); +#334817 = ORIENTED_EDGE('',*,*,#334818,.T.); +#334818 = EDGE_CURVE('',#334811,#334811,#334819,.T.); +#334819 = CIRCLE('',#334820,0.625); +#334820 = AXIS2_PLACEMENT_3D('',#334821,#334822,#334823); +#334821 = CARTESIAN_POINT('',(140.75,-105.5,1.55)); +#334822 = DIRECTION('',(0.,0.,1.)); +#334823 = DIRECTION('',(-0.,-1.,0.)); +#334824 = ORIENTED_EDGE('',*,*,#334808,.F.); +#334825 = ORIENTED_EDGE('',*,*,#334826,.F.); +#334826 = EDGE_CURVE('',#334809,#334809,#334827,.T.); +#334827 = CIRCLE('',#334828,0.625); +#334828 = AXIS2_PLACEMENT_3D('',#334829,#334830,#334831); +#334829 = CARTESIAN_POINT('',(140.75,-105.5,-4.E-02)); +#334830 = DIRECTION('',(0.,0.,1.)); +#334831 = DIRECTION('',(-0.,-1.,0.)); +#334832 = CYLINDRICAL_SURFACE('',#334833,0.625); +#334833 = AXIS2_PLACEMENT_3D('',#334834,#334835,#334836); +#334834 = CARTESIAN_POINT('',(140.75,-105.5,-4.E-02)); +#334835 = DIRECTION('',(-0.,-0.,-1.)); +#334836 = DIRECTION('',(-0.,-1.,0.)); +#334837 = ADVANCED_FACE('',(#334838,#334841),#334852,.F.); +#334838 = FACE_BOUND('',#334839,.F.); +#334839 = EDGE_LOOP('',(#334840)); +#334840 = ORIENTED_EDGE('',*,*,#334826,.T.); +#334841 = FACE_BOUND('',#334842,.F.); +#334842 = EDGE_LOOP('',(#334843)); +#334843 = ORIENTED_EDGE('',*,*,#334844,.T.); +#334844 = EDGE_CURVE('',#334845,#334845,#334847,.T.); +#334845 = VERTEX_POINT('',#334846); +#334846 = CARTESIAN_POINT('',(140.75,-106.1,-4.E-02)); +#334847 = CIRCLE('',#334848,0.6); +#334848 = AXIS2_PLACEMENT_3D('',#334849,#334850,#334851); +#334849 = CARTESIAN_POINT('',(140.75,-105.5,-4.E-02)); +#334850 = DIRECTION('',(-0.,0.,-1.)); +#334851 = DIRECTION('',(-0.,-1.,0.)); +#334852 = PLANE('',#334853); +#334853 = AXIS2_PLACEMENT_3D('',#334854,#334855,#334856); +#334854 = CARTESIAN_POINT('',(140.75,-106.125,-4.E-02)); +#334855 = DIRECTION('',(0.,0.,1.)); +#334856 = DIRECTION('',(1.,0.,-0.)); +#334857 = ADVANCED_FACE('',(#334858,#334861),#334872,.T.); +#334858 = FACE_BOUND('',#334859,.T.); +#334859 = EDGE_LOOP('',(#334860)); +#334860 = ORIENTED_EDGE('',*,*,#334818,.T.); +#334861 = FACE_BOUND('',#334862,.T.); +#334862 = EDGE_LOOP('',(#334863)); +#334863 = ORIENTED_EDGE('',*,*,#334864,.T.); +#334864 = EDGE_CURVE('',#334865,#334865,#334867,.T.); +#334865 = VERTEX_POINT('',#334866); +#334866 = CARTESIAN_POINT('',(140.75,-106.1,1.55)); +#334867 = CIRCLE('',#334868,0.6); +#334868 = AXIS2_PLACEMENT_3D('',#334869,#334870,#334871); +#334869 = CARTESIAN_POINT('',(140.75,-105.5,1.55)); +#334870 = DIRECTION('',(-0.,0.,-1.)); +#334871 = DIRECTION('',(-0.,-1.,0.)); +#334872 = PLANE('',#334873); +#334873 = AXIS2_PLACEMENT_3D('',#334874,#334875,#334876); +#334874 = CARTESIAN_POINT('',(140.75,-106.125,1.55)); +#334875 = DIRECTION('',(0.,0.,1.)); +#334876 = DIRECTION('',(1.,0.,-0.)); +#334877 = ADVANCED_FACE('',(#334878),#334889,.F.); +#334878 = FACE_BOUND('',#334879,.T.); +#334879 = EDGE_LOOP('',(#334880,#334881,#334887,#334888)); +#334880 = ORIENTED_EDGE('',*,*,#334844,.T.); +#334881 = ORIENTED_EDGE('',*,*,#334882,.T.); +#334882 = EDGE_CURVE('',#334845,#334865,#334883,.T.); +#334883 = LINE('',#334884,#334885); +#334884 = CARTESIAN_POINT('',(140.75,-106.1,-4.6E-02)); +#334885 = VECTOR('',#334886,1.); +#334886 = DIRECTION('',(0.,0.,1.)); +#334887 = ORIENTED_EDGE('',*,*,#334864,.F.); +#334888 = ORIENTED_EDGE('',*,*,#334882,.F.); +#334889 = CYLINDRICAL_SURFACE('',#334890,0.6); +#334890 = AXIS2_PLACEMENT_3D('',#334891,#334892,#334893); +#334891 = CARTESIAN_POINT('',(140.75,-105.5,-4.6E-02)); +#334892 = DIRECTION('',(-0.,-0.,-1.)); +#334893 = DIRECTION('',(-0.,-1.,0.)); +#334894 = MANIFOLD_SOLID_BREP('',#334895); +#334895 = CLOSED_SHELL('',(#334896,#334929,#334938)); +#334896 = ADVANCED_FACE('',(#334897),#334924,.T.); +#334897 = FACE_BOUND('',#334898,.F.); +#334898 = EDGE_LOOP('',(#334899,#334909,#334916,#334917)); +#334899 = ORIENTED_EDGE('',*,*,#334900,.T.); +#334900 = EDGE_CURVE('',#334901,#334903,#334905,.T.); +#334901 = VERTEX_POINT('',#334902); +#334902 = CARTESIAN_POINT('',(151.8,-127.3,1.51)); +#334903 = VERTEX_POINT('',#334904); +#334904 = CARTESIAN_POINT('',(151.8,-127.3,1.55)); +#334905 = LINE('',#334906,#334907); +#334906 = CARTESIAN_POINT('',(151.8,-127.3,1.51)); +#334907 = VECTOR('',#334908,1.); +#334908 = DIRECTION('',(0.,0.,1.)); +#334909 = ORIENTED_EDGE('',*,*,#334910,.T.); +#334910 = EDGE_CURVE('',#334903,#334903,#334911,.T.); +#334911 = CIRCLE('',#334912,0.5); +#334912 = AXIS2_PLACEMENT_3D('',#334913,#334914,#334915); +#334913 = CARTESIAN_POINT('',(151.3,-127.3,1.55)); +#334914 = DIRECTION('',(0.,0.,1.)); +#334915 = DIRECTION('',(1.,0.,-0.)); +#334916 = ORIENTED_EDGE('',*,*,#334900,.F.); +#334917 = ORIENTED_EDGE('',*,*,#334918,.F.); +#334918 = EDGE_CURVE('',#334901,#334901,#334919,.T.); +#334919 = CIRCLE('',#334920,0.5); +#334920 = AXIS2_PLACEMENT_3D('',#334921,#334922,#334923); +#334921 = CARTESIAN_POINT('',(151.3,-127.3,1.51)); +#334922 = DIRECTION('',(0.,0.,1.)); +#334923 = DIRECTION('',(1.,0.,-0.)); +#334924 = CYLINDRICAL_SURFACE('',#334925,0.5); +#334925 = AXIS2_PLACEMENT_3D('',#334926,#334927,#334928); +#334926 = CARTESIAN_POINT('',(151.3,-127.3,1.51)); +#334927 = DIRECTION('',(-0.,-0.,-1.)); +#334928 = DIRECTION('',(1.,0.,-0.)); +#334929 = ADVANCED_FACE('',(#334930),#334933,.F.); +#334930 = FACE_BOUND('',#334931,.F.); +#334931 = EDGE_LOOP('',(#334932)); +#334932 = ORIENTED_EDGE('',*,*,#334918,.T.); +#334933 = PLANE('',#334934); +#334934 = AXIS2_PLACEMENT_3D('',#334935,#334936,#334937); +#334935 = CARTESIAN_POINT('',(0.,0.,1.51)); +#334936 = DIRECTION('',(0.,0.,1.)); +#334937 = DIRECTION('',(1.,0.,-0.)); +#334938 = ADVANCED_FACE('',(#334939),#334942,.T.); +#334939 = FACE_BOUND('',#334940,.T.); +#334940 = EDGE_LOOP('',(#334941)); +#334941 = ORIENTED_EDGE('',*,*,#334910,.T.); +#334942 = PLANE('',#334943); +#334943 = AXIS2_PLACEMENT_3D('',#334944,#334945,#334946); +#334944 = CARTESIAN_POINT('',(0.,0.,1.55)); +#334945 = DIRECTION('',(0.,0.,1.)); +#334946 = DIRECTION('',(1.,0.,-0.)); +#334947 = MANIFOLD_SOLID_BREP('',#334948); +#334948 = CLOSED_SHELL('',(#334949,#334991,#335022,#335055,#335086, + #335119,#335150,#335183,#335205,#335221)); +#334949 = ADVANCED_FACE('',(#334950),#334986,.T.); +#334950 = FACE_BOUND('',#334951,.T.); +#334951 = EDGE_LOOP('',(#334952,#334962,#334971,#334979)); +#334952 = ORIENTED_EDGE('',*,*,#334953,.T.); +#334953 = EDGE_CURVE('',#334954,#334956,#334958,.T.); +#334954 = VERTEX_POINT('',#334955); +#334955 = CARTESIAN_POINT('',(120.25,-98.25,1.51)); +#334956 = VERTEX_POINT('',#334957); +#334957 = CARTESIAN_POINT('',(120.25,-98.25,1.55)); +#334958 = LINE('',#334959,#334960); +#334959 = CARTESIAN_POINT('',(120.25,-98.25,1.51)); +#334960 = VECTOR('',#334961,1.); +#334961 = DIRECTION('',(0.,0.,1.)); +#334962 = ORIENTED_EDGE('',*,*,#334963,.T.); +#334963 = EDGE_CURVE('',#334956,#334964,#334966,.T.); +#334964 = VERTEX_POINT('',#334965); +#334965 = CARTESIAN_POINT('',(120.475,-98.025,1.55)); +#334966 = CIRCLE('',#334967,0.225000087974); +#334967 = AXIS2_PLACEMENT_3D('',#334968,#334969,#334970); +#334968 = CARTESIAN_POINT('',(120.47500008797,-98.25000008797,1.55)); +#334969 = DIRECTION('',(0.,0.,-1.)); +#334970 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#334971 = ORIENTED_EDGE('',*,*,#334972,.F.); +#334972 = EDGE_CURVE('',#334973,#334964,#334975,.T.); +#334973 = VERTEX_POINT('',#334974); +#334974 = CARTESIAN_POINT('',(120.475,-98.025,1.51)); +#334975 = LINE('',#334976,#334977); +#334976 = CARTESIAN_POINT('',(120.475,-98.025,1.51)); +#334977 = VECTOR('',#334978,1.); +#334978 = DIRECTION('',(0.,0.,1.)); +#334979 = ORIENTED_EDGE('',*,*,#334980,.F.); +#334980 = EDGE_CURVE('',#334954,#334973,#334981,.T.); +#334981 = CIRCLE('',#334982,0.225000087974); +#334982 = AXIS2_PLACEMENT_3D('',#334983,#334984,#334985); +#334983 = CARTESIAN_POINT('',(120.47500008797,-98.25000008797,1.51)); +#334984 = DIRECTION('',(0.,0.,-1.)); +#334985 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#334986 = CYLINDRICAL_SURFACE('',#334987,0.225000087974); +#334987 = AXIS2_PLACEMENT_3D('',#334988,#334989,#334990); +#334988 = CARTESIAN_POINT('',(120.47500008797,-98.25000008797,1.51)); +#334989 = DIRECTION('',(0.,0.,-1.)); +#334990 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#334991 = ADVANCED_FACE('',(#334992),#335017,.T.); +#334992 = FACE_BOUND('',#334993,.T.); +#334993 = EDGE_LOOP('',(#334994,#334995,#335003,#335011)); +#334994 = ORIENTED_EDGE('',*,*,#334972,.T.); +#334995 = ORIENTED_EDGE('',*,*,#334996,.T.); +#334996 = EDGE_CURVE('',#334964,#334997,#334999,.T.); +#334997 = VERTEX_POINT('',#334998); +#334998 = CARTESIAN_POINT('',(120.925,-98.025,1.55)); +#334999 = LINE('',#335000,#335001); +#335000 = CARTESIAN_POINT('',(120.475,-98.025,1.55)); +#335001 = VECTOR('',#335002,1.); +#335002 = DIRECTION('',(1.,0.,0.)); +#335003 = ORIENTED_EDGE('',*,*,#335004,.F.); +#335004 = EDGE_CURVE('',#335005,#334997,#335007,.T.); +#335005 = VERTEX_POINT('',#335006); +#335006 = CARTESIAN_POINT('',(120.925,-98.025,1.51)); +#335007 = LINE('',#335008,#335009); +#335008 = CARTESIAN_POINT('',(120.925,-98.025,1.51)); +#335009 = VECTOR('',#335010,1.); +#335010 = DIRECTION('',(0.,0.,1.)); +#335011 = ORIENTED_EDGE('',*,*,#335012,.F.); +#335012 = EDGE_CURVE('',#334973,#335005,#335013,.T.); +#335013 = LINE('',#335014,#335015); +#335014 = CARTESIAN_POINT('',(120.475,-98.025,1.51)); +#335015 = VECTOR('',#335016,1.); +#335016 = DIRECTION('',(1.,0.,0.)); +#335017 = PLANE('',#335018); +#335018 = AXIS2_PLACEMENT_3D('',#335019,#335020,#335021); +#335019 = CARTESIAN_POINT('',(120.475,-98.025,1.51)); +#335020 = DIRECTION('',(0.,1.,0.)); +#335021 = DIRECTION('',(1.,0.,0.)); +#335022 = ADVANCED_FACE('',(#335023),#335050,.T.); +#335023 = FACE_BOUND('',#335024,.T.); +#335024 = EDGE_LOOP('',(#335025,#335026,#335035,#335043)); +#335025 = ORIENTED_EDGE('',*,*,#335004,.T.); +#335026 = ORIENTED_EDGE('',*,*,#335027,.T.); +#335027 = EDGE_CURVE('',#334997,#335028,#335030,.T.); +#335028 = VERTEX_POINT('',#335029); +#335029 = CARTESIAN_POINT('',(121.15,-98.25,1.55)); +#335030 = CIRCLE('',#335031,0.225000087974); +#335031 = AXIS2_PLACEMENT_3D('',#335032,#335033,#335034); +#335032 = CARTESIAN_POINT('',(120.92499991202,-98.25000008797,1.55)); +#335033 = DIRECTION('',(0.,0.,-1.)); +#335034 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#335035 = ORIENTED_EDGE('',*,*,#335036,.F.); +#335036 = EDGE_CURVE('',#335037,#335028,#335039,.T.); +#335037 = VERTEX_POINT('',#335038); +#335038 = CARTESIAN_POINT('',(121.15,-98.25,1.51)); +#335039 = LINE('',#335040,#335041); +#335040 = CARTESIAN_POINT('',(121.15,-98.25,1.51)); +#335041 = VECTOR('',#335042,1.); +#335042 = DIRECTION('',(0.,0.,1.)); +#335043 = ORIENTED_EDGE('',*,*,#335044,.F.); +#335044 = EDGE_CURVE('',#335005,#335037,#335045,.T.); +#335045 = CIRCLE('',#335046,0.225000087974); +#335046 = AXIS2_PLACEMENT_3D('',#335047,#335048,#335049); +#335047 = CARTESIAN_POINT('',(120.92499991202,-98.25000008797,1.51)); +#335048 = DIRECTION('',(0.,0.,-1.)); +#335049 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#335050 = CYLINDRICAL_SURFACE('',#335051,0.225000087974); +#335051 = AXIS2_PLACEMENT_3D('',#335052,#335053,#335054); +#335052 = CARTESIAN_POINT('',(120.92499991202,-98.25000008797,1.51)); +#335053 = DIRECTION('',(0.,0.,-1.)); +#335054 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#335055 = ADVANCED_FACE('',(#335056),#335081,.T.); +#335056 = FACE_BOUND('',#335057,.T.); +#335057 = EDGE_LOOP('',(#335058,#335059,#335067,#335075)); +#335058 = ORIENTED_EDGE('',*,*,#335036,.T.); +#335059 = ORIENTED_EDGE('',*,*,#335060,.T.); +#335060 = EDGE_CURVE('',#335028,#335061,#335063,.T.); +#335061 = VERTEX_POINT('',#335062); +#335062 = CARTESIAN_POINT('',(121.15,-99.1,1.55)); +#335063 = LINE('',#335064,#335065); +#335064 = CARTESIAN_POINT('',(121.15,-98.25,1.55)); +#335065 = VECTOR('',#335066,1.); +#335066 = DIRECTION('',(0.,-1.,0.)); +#335067 = ORIENTED_EDGE('',*,*,#335068,.F.); +#335068 = EDGE_CURVE('',#335069,#335061,#335071,.T.); +#335069 = VERTEX_POINT('',#335070); +#335070 = CARTESIAN_POINT('',(121.15,-99.1,1.51)); +#335071 = LINE('',#335072,#335073); +#335072 = CARTESIAN_POINT('',(121.15,-99.1,1.51)); +#335073 = VECTOR('',#335074,1.); +#335074 = DIRECTION('',(0.,0.,1.)); +#335075 = ORIENTED_EDGE('',*,*,#335076,.F.); +#335076 = EDGE_CURVE('',#335037,#335069,#335077,.T.); +#335077 = LINE('',#335078,#335079); +#335078 = CARTESIAN_POINT('',(121.15,-98.25,1.51)); +#335079 = VECTOR('',#335080,1.); +#335080 = DIRECTION('',(0.,-1.,0.)); +#335081 = PLANE('',#335082); +#335082 = AXIS2_PLACEMENT_3D('',#335083,#335084,#335085); +#335083 = CARTESIAN_POINT('',(121.15,-98.25,1.51)); +#335084 = DIRECTION('',(1.,0.,-0.)); +#335085 = DIRECTION('',(0.,-1.,0.)); +#335086 = ADVANCED_FACE('',(#335087),#335114,.T.); +#335087 = FACE_BOUND('',#335088,.T.); +#335088 = EDGE_LOOP('',(#335089,#335090,#335099,#335107)); +#335089 = ORIENTED_EDGE('',*,*,#335068,.T.); +#335090 = ORIENTED_EDGE('',*,*,#335091,.T.); +#335091 = EDGE_CURVE('',#335061,#335092,#335094,.T.); +#335092 = VERTEX_POINT('',#335093); +#335093 = CARTESIAN_POINT('',(120.925,-99.325,1.55)); +#335094 = CIRCLE('',#335095,0.225000087974); +#335095 = AXIS2_PLACEMENT_3D('',#335096,#335097,#335098); +#335096 = CARTESIAN_POINT('',(120.92499991202,-99.09999991202,1.55)); +#335097 = DIRECTION('',(0.,0.,-1.)); +#335098 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#335099 = ORIENTED_EDGE('',*,*,#335100,.F.); +#335100 = EDGE_CURVE('',#335101,#335092,#335103,.T.); +#335101 = VERTEX_POINT('',#335102); +#335102 = CARTESIAN_POINT('',(120.925,-99.325,1.51)); +#335103 = LINE('',#335104,#335105); +#335104 = CARTESIAN_POINT('',(120.925,-99.325,1.51)); +#335105 = VECTOR('',#335106,1.); +#335106 = DIRECTION('',(0.,0.,1.)); +#335107 = ORIENTED_EDGE('',*,*,#335108,.F.); +#335108 = EDGE_CURVE('',#335069,#335101,#335109,.T.); +#335109 = CIRCLE('',#335110,0.225000087974); +#335110 = AXIS2_PLACEMENT_3D('',#335111,#335112,#335113); +#335111 = CARTESIAN_POINT('',(120.92499991202,-99.09999991202,1.51)); +#335112 = DIRECTION('',(0.,0.,-1.)); +#335113 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#335114 = CYLINDRICAL_SURFACE('',#335115,0.225000087974); +#335115 = AXIS2_PLACEMENT_3D('',#335116,#335117,#335118); +#335116 = CARTESIAN_POINT('',(120.92499991202,-99.09999991202,1.51)); +#335117 = DIRECTION('',(0.,0.,-1.)); +#335118 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#335119 = ADVANCED_FACE('',(#335120),#335145,.T.); +#335120 = FACE_BOUND('',#335121,.T.); +#335121 = EDGE_LOOP('',(#335122,#335123,#335131,#335139)); +#335122 = ORIENTED_EDGE('',*,*,#335100,.T.); +#335123 = ORIENTED_EDGE('',*,*,#335124,.T.); +#335124 = EDGE_CURVE('',#335092,#335125,#335127,.T.); +#335125 = VERTEX_POINT('',#335126); +#335126 = CARTESIAN_POINT('',(120.475,-99.325,1.55)); +#335127 = LINE('',#335128,#335129); +#335128 = CARTESIAN_POINT('',(120.925,-99.325,1.55)); +#335129 = VECTOR('',#335130,1.); +#335130 = DIRECTION('',(-1.,0.,0.)); +#335131 = ORIENTED_EDGE('',*,*,#335132,.F.); +#335132 = EDGE_CURVE('',#335133,#335125,#335135,.T.); +#335133 = VERTEX_POINT('',#335134); +#335134 = CARTESIAN_POINT('',(120.475,-99.325,1.51)); +#335135 = LINE('',#335136,#335137); +#335136 = CARTESIAN_POINT('',(120.475,-99.325,1.51)); +#335137 = VECTOR('',#335138,1.); +#335138 = DIRECTION('',(0.,0.,1.)); +#335139 = ORIENTED_EDGE('',*,*,#335140,.F.); +#335140 = EDGE_CURVE('',#335101,#335133,#335141,.T.); +#335141 = LINE('',#335142,#335143); +#335142 = CARTESIAN_POINT('',(120.925,-99.325,1.51)); +#335143 = VECTOR('',#335144,1.); +#335144 = DIRECTION('',(-1.,0.,0.)); +#335145 = PLANE('',#335146); +#335146 = AXIS2_PLACEMENT_3D('',#335147,#335148,#335149); +#335147 = CARTESIAN_POINT('',(120.925,-99.325,1.51)); +#335148 = DIRECTION('',(0.,-1.,0.)); +#335149 = DIRECTION('',(-1.,0.,0.)); +#335150 = ADVANCED_FACE('',(#335151),#335178,.T.); +#335151 = FACE_BOUND('',#335152,.T.); +#335152 = EDGE_LOOP('',(#335153,#335154,#335163,#335171)); +#335153 = ORIENTED_EDGE('',*,*,#335132,.T.); +#335154 = ORIENTED_EDGE('',*,*,#335155,.T.); +#335155 = EDGE_CURVE('',#335125,#335156,#335158,.T.); +#335156 = VERTEX_POINT('',#335157); +#335157 = CARTESIAN_POINT('',(120.25,-99.1,1.55)); +#335158 = CIRCLE('',#335159,0.225000087974); +#335159 = AXIS2_PLACEMENT_3D('',#335160,#335161,#335162); +#335160 = CARTESIAN_POINT('',(120.47500008797,-99.09999991202,1.55)); +#335161 = DIRECTION('',(0.,0.,-1.)); +#335162 = DIRECTION('',(-3.909953458167E-07,-1.,-0.)); +#335163 = ORIENTED_EDGE('',*,*,#335164,.F.); +#335164 = EDGE_CURVE('',#335165,#335156,#335167,.T.); +#335165 = VERTEX_POINT('',#335166); +#335166 = CARTESIAN_POINT('',(120.25,-99.1,1.51)); +#335167 = LINE('',#335168,#335169); +#335168 = CARTESIAN_POINT('',(120.25,-99.1,1.51)); +#335169 = VECTOR('',#335170,1.); +#335170 = DIRECTION('',(0.,0.,1.)); +#335171 = ORIENTED_EDGE('',*,*,#335172,.F.); +#335172 = EDGE_CURVE('',#335133,#335165,#335173,.T.); +#335173 = CIRCLE('',#335174,0.225000087974); +#335174 = AXIS2_PLACEMENT_3D('',#335175,#335176,#335177); +#335175 = CARTESIAN_POINT('',(120.47500008797,-99.09999991202,1.51)); +#335176 = DIRECTION('',(0.,0.,-1.)); +#335177 = DIRECTION('',(-3.909953458167E-07,-1.,-0.)); +#335178 = CYLINDRICAL_SURFACE('',#335179,0.225000087974); +#335179 = AXIS2_PLACEMENT_3D('',#335180,#335181,#335182); +#335180 = CARTESIAN_POINT('',(120.47500008797,-99.09999991202,1.51)); +#335181 = DIRECTION('',(0.,0.,-1.)); +#335182 = DIRECTION('',(-3.909953458167E-07,-1.,-0.)); +#335183 = ADVANCED_FACE('',(#335184),#335200,.T.); +#335184 = FACE_BOUND('',#335185,.T.); +#335185 = EDGE_LOOP('',(#335186,#335187,#335193,#335194)); +#335186 = ORIENTED_EDGE('',*,*,#335164,.T.); +#335187 = ORIENTED_EDGE('',*,*,#335188,.T.); +#335188 = EDGE_CURVE('',#335156,#334956,#335189,.T.); +#335189 = LINE('',#335190,#335191); +#335190 = CARTESIAN_POINT('',(120.25,-99.1,1.55)); +#335191 = VECTOR('',#335192,1.); +#335192 = DIRECTION('',(0.,1.,0.)); +#335193 = ORIENTED_EDGE('',*,*,#334953,.F.); +#335194 = ORIENTED_EDGE('',*,*,#335195,.F.); +#335195 = EDGE_CURVE('',#335165,#334954,#335196,.T.); +#335196 = LINE('',#335197,#335198); +#335197 = CARTESIAN_POINT('',(120.25,-99.1,1.51)); +#335198 = VECTOR('',#335199,1.); +#335199 = DIRECTION('',(0.,1.,0.)); +#335200 = PLANE('',#335201); +#335201 = AXIS2_PLACEMENT_3D('',#335202,#335203,#335204); +#335202 = CARTESIAN_POINT('',(120.25,-99.1,1.51)); +#335203 = DIRECTION('',(-1.,0.,0.)); +#335204 = DIRECTION('',(0.,1.,0.)); +#335205 = ADVANCED_FACE('',(#335206),#335216,.F.); +#335206 = FACE_BOUND('',#335207,.T.); +#335207 = EDGE_LOOP('',(#335208,#335209,#335210,#335211,#335212,#335213, + #335214,#335215)); +#335208 = ORIENTED_EDGE('',*,*,#334980,.T.); +#335209 = ORIENTED_EDGE('',*,*,#335012,.T.); +#335210 = ORIENTED_EDGE('',*,*,#335044,.T.); +#335211 = ORIENTED_EDGE('',*,*,#335076,.T.); +#335212 = ORIENTED_EDGE('',*,*,#335108,.T.); +#335213 = ORIENTED_EDGE('',*,*,#335140,.T.); +#335214 = ORIENTED_EDGE('',*,*,#335172,.T.); +#335215 = ORIENTED_EDGE('',*,*,#335195,.T.); +#335216 = PLANE('',#335217); +#335217 = AXIS2_PLACEMENT_3D('',#335218,#335219,#335220); +#335218 = CARTESIAN_POINT('',(0.,0.,1.51)); +#335219 = DIRECTION('',(0.,0.,1.)); +#335220 = DIRECTION('',(1.,0.,-0.)); +#335221 = ADVANCED_FACE('',(#335222),#335232,.T.); +#335222 = FACE_BOUND('',#335223,.F.); +#335223 = EDGE_LOOP('',(#335224,#335225,#335226,#335227,#335228,#335229, + #335230,#335231)); +#335224 = ORIENTED_EDGE('',*,*,#334963,.T.); +#335225 = ORIENTED_EDGE('',*,*,#334996,.T.); +#335226 = ORIENTED_EDGE('',*,*,#335027,.T.); +#335227 = ORIENTED_EDGE('',*,*,#335060,.T.); +#335228 = ORIENTED_EDGE('',*,*,#335091,.T.); +#335229 = ORIENTED_EDGE('',*,*,#335124,.T.); +#335230 = ORIENTED_EDGE('',*,*,#335155,.T.); +#335231 = ORIENTED_EDGE('',*,*,#335188,.T.); +#335232 = PLANE('',#335233); +#335233 = AXIS2_PLACEMENT_3D('',#335234,#335235,#335236); +#335234 = CARTESIAN_POINT('',(0.,0.,1.55)); +#335235 = DIRECTION('',(0.,0.,1.)); +#335236 = DIRECTION('',(1.,0.,-0.)); +#335237 = MANIFOLD_SOLID_BREP('',#335238); +#335238 = CLOSED_SHELL('',(#335239,#335281,#335312,#335345,#335376, + #335409,#335440,#335473,#335495,#335511)); +#335239 = ADVANCED_FACE('',(#335240),#335276,.T.); +#335240 = FACE_BOUND('',#335241,.T.); +#335241 = EDGE_LOOP('',(#335242,#335252,#335261,#335269)); +#335242 = ORIENTED_EDGE('',*,*,#335243,.T.); +#335243 = EDGE_CURVE('',#335244,#335246,#335248,.T.); +#335244 = VERTEX_POINT('',#335245); +#335245 = CARTESIAN_POINT('',(120.25,-101.95,1.51)); +#335246 = VERTEX_POINT('',#335247); +#335247 = CARTESIAN_POINT('',(120.25,-101.95,1.55)); +#335248 = LINE('',#335249,#335250); +#335249 = CARTESIAN_POINT('',(120.25,-101.95,1.51)); +#335250 = VECTOR('',#335251,1.); +#335251 = DIRECTION('',(0.,0.,1.)); +#335252 = ORIENTED_EDGE('',*,*,#335253,.T.); +#335253 = EDGE_CURVE('',#335246,#335254,#335256,.T.); +#335254 = VERTEX_POINT('',#335255); +#335255 = CARTESIAN_POINT('',(120.475,-101.725,1.55)); +#335256 = CIRCLE('',#335257,0.225000087974); +#335257 = AXIS2_PLACEMENT_3D('',#335258,#335259,#335260); +#335258 = CARTESIAN_POINT('',(120.47500008797,-101.9500000879,1.55)); +#335259 = DIRECTION('',(0.,0.,-1.)); +#335260 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#335261 = ORIENTED_EDGE('',*,*,#335262,.F.); +#335262 = EDGE_CURVE('',#335263,#335254,#335265,.T.); +#335263 = VERTEX_POINT('',#335264); +#335264 = CARTESIAN_POINT('',(120.475,-101.725,1.51)); +#335265 = LINE('',#335266,#335267); +#335266 = CARTESIAN_POINT('',(120.475,-101.725,1.51)); +#335267 = VECTOR('',#335268,1.); +#335268 = DIRECTION('',(0.,0.,1.)); +#335269 = ORIENTED_EDGE('',*,*,#335270,.F.); +#335270 = EDGE_CURVE('',#335244,#335263,#335271,.T.); +#335271 = CIRCLE('',#335272,0.225000087974); +#335272 = AXIS2_PLACEMENT_3D('',#335273,#335274,#335275); +#335273 = CARTESIAN_POINT('',(120.47500008797,-101.9500000879,1.51)); +#335274 = DIRECTION('',(0.,0.,-1.)); +#335275 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#335276 = CYLINDRICAL_SURFACE('',#335277,0.225000087974); +#335277 = AXIS2_PLACEMENT_3D('',#335278,#335279,#335280); +#335278 = CARTESIAN_POINT('',(120.47500008797,-101.9500000879,1.51)); +#335279 = DIRECTION('',(0.,0.,-1.)); +#335280 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#335281 = ADVANCED_FACE('',(#335282),#335307,.T.); +#335282 = FACE_BOUND('',#335283,.T.); +#335283 = EDGE_LOOP('',(#335284,#335285,#335293,#335301)); +#335284 = ORIENTED_EDGE('',*,*,#335262,.T.); +#335285 = ORIENTED_EDGE('',*,*,#335286,.T.); +#335286 = EDGE_CURVE('',#335254,#335287,#335289,.T.); +#335287 = VERTEX_POINT('',#335288); +#335288 = CARTESIAN_POINT('',(120.925,-101.725,1.55)); +#335289 = LINE('',#335290,#335291); +#335290 = CARTESIAN_POINT('',(120.475,-101.725,1.55)); +#335291 = VECTOR('',#335292,1.); +#335292 = DIRECTION('',(1.,0.,0.)); +#335293 = ORIENTED_EDGE('',*,*,#335294,.F.); +#335294 = EDGE_CURVE('',#335295,#335287,#335297,.T.); +#335295 = VERTEX_POINT('',#335296); +#335296 = CARTESIAN_POINT('',(120.925,-101.725,1.51)); +#335297 = LINE('',#335298,#335299); +#335298 = CARTESIAN_POINT('',(120.925,-101.725,1.51)); +#335299 = VECTOR('',#335300,1.); +#335300 = DIRECTION('',(0.,0.,1.)); +#335301 = ORIENTED_EDGE('',*,*,#335302,.F.); +#335302 = EDGE_CURVE('',#335263,#335295,#335303,.T.); +#335303 = LINE('',#335304,#335305); +#335304 = CARTESIAN_POINT('',(120.475,-101.725,1.51)); +#335305 = VECTOR('',#335306,1.); +#335306 = DIRECTION('',(1.,0.,0.)); +#335307 = PLANE('',#335308); +#335308 = AXIS2_PLACEMENT_3D('',#335309,#335310,#335311); +#335309 = CARTESIAN_POINT('',(120.475,-101.725,1.51)); +#335310 = DIRECTION('',(0.,1.,0.)); +#335311 = DIRECTION('',(1.,0.,0.)); +#335312 = ADVANCED_FACE('',(#335313),#335340,.T.); +#335313 = FACE_BOUND('',#335314,.T.); +#335314 = EDGE_LOOP('',(#335315,#335316,#335325,#335333)); +#335315 = ORIENTED_EDGE('',*,*,#335294,.T.); +#335316 = ORIENTED_EDGE('',*,*,#335317,.T.); +#335317 = EDGE_CURVE('',#335287,#335318,#335320,.T.); +#335318 = VERTEX_POINT('',#335319); +#335319 = CARTESIAN_POINT('',(121.15,-101.95,1.55)); +#335320 = CIRCLE('',#335321,0.225000087974); +#335321 = AXIS2_PLACEMENT_3D('',#335322,#335323,#335324); +#335322 = CARTESIAN_POINT('',(120.92499991202,-101.9500000879,1.55)); +#335323 = DIRECTION('',(0.,0.,-1.)); +#335324 = DIRECTION('',(3.909955352945E-07,1.,0.)); +#335325 = ORIENTED_EDGE('',*,*,#335326,.F.); +#335326 = EDGE_CURVE('',#335327,#335318,#335329,.T.); +#335327 = VERTEX_POINT('',#335328); +#335328 = CARTESIAN_POINT('',(121.15,-101.95,1.51)); +#335329 = LINE('',#335330,#335331); +#335330 = CARTESIAN_POINT('',(121.15,-101.95,1.51)); +#335331 = VECTOR('',#335332,1.); +#335332 = DIRECTION('',(0.,0.,1.)); +#335333 = ORIENTED_EDGE('',*,*,#335334,.F.); +#335334 = EDGE_CURVE('',#335295,#335327,#335335,.T.); +#335335 = CIRCLE('',#335336,0.225000087974); +#335336 = AXIS2_PLACEMENT_3D('',#335337,#335338,#335339); +#335337 = CARTESIAN_POINT('',(120.92499991202,-101.9500000879,1.51)); +#335338 = DIRECTION('',(0.,0.,-1.)); +#335339 = DIRECTION('',(3.909955352945E-07,1.,0.)); +#335340 = CYLINDRICAL_SURFACE('',#335341,0.225000087974); +#335341 = AXIS2_PLACEMENT_3D('',#335342,#335343,#335344); +#335342 = CARTESIAN_POINT('',(120.92499991202,-101.9500000879,1.51)); +#335343 = DIRECTION('',(0.,0.,-1.)); +#335344 = DIRECTION('',(3.909955352945E-07,1.,0.)); +#335345 = ADVANCED_FACE('',(#335346),#335371,.T.); +#335346 = FACE_BOUND('',#335347,.T.); +#335347 = EDGE_LOOP('',(#335348,#335349,#335357,#335365)); +#335348 = ORIENTED_EDGE('',*,*,#335326,.T.); +#335349 = ORIENTED_EDGE('',*,*,#335350,.T.); +#335350 = EDGE_CURVE('',#335318,#335351,#335353,.T.); +#335351 = VERTEX_POINT('',#335352); +#335352 = CARTESIAN_POINT('',(121.15,-102.8,1.55)); +#335353 = LINE('',#335354,#335355); +#335354 = CARTESIAN_POINT('',(121.15,-101.95,1.55)); +#335355 = VECTOR('',#335356,1.); +#335356 = DIRECTION('',(0.,-1.,0.)); +#335357 = ORIENTED_EDGE('',*,*,#335358,.F.); +#335358 = EDGE_CURVE('',#335359,#335351,#335361,.T.); +#335359 = VERTEX_POINT('',#335360); +#335360 = CARTESIAN_POINT('',(121.15,-102.8,1.51)); +#335361 = LINE('',#335362,#335363); +#335362 = CARTESIAN_POINT('',(121.15,-102.8,1.51)); +#335363 = VECTOR('',#335364,1.); +#335364 = DIRECTION('',(0.,0.,1.)); +#335365 = ORIENTED_EDGE('',*,*,#335366,.F.); +#335366 = EDGE_CURVE('',#335327,#335359,#335367,.T.); +#335367 = LINE('',#335368,#335369); +#335368 = CARTESIAN_POINT('',(121.15,-101.95,1.51)); +#335369 = VECTOR('',#335370,1.); +#335370 = DIRECTION('',(0.,-1.,0.)); +#335371 = PLANE('',#335372); +#335372 = AXIS2_PLACEMENT_3D('',#335373,#335374,#335375); +#335373 = CARTESIAN_POINT('',(121.15,-101.95,1.51)); +#335374 = DIRECTION('',(1.,0.,-0.)); +#335375 = DIRECTION('',(0.,-1.,0.)); +#335376 = ADVANCED_FACE('',(#335377),#335404,.T.); +#335377 = FACE_BOUND('',#335378,.T.); +#335378 = EDGE_LOOP('',(#335379,#335380,#335389,#335397)); +#335379 = ORIENTED_EDGE('',*,*,#335358,.T.); +#335380 = ORIENTED_EDGE('',*,*,#335381,.T.); +#335381 = EDGE_CURVE('',#335351,#335382,#335384,.T.); +#335382 = VERTEX_POINT('',#335383); +#335383 = CARTESIAN_POINT('',(120.925,-103.025,1.55)); +#335384 = CIRCLE('',#335385,0.225000087974); +#335385 = AXIS2_PLACEMENT_3D('',#335386,#335387,#335388); +#335386 = CARTESIAN_POINT('',(120.92499991202,-102.799999912,1.55)); +#335387 = DIRECTION('',(0.,0.,-1.)); +#335388 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#335389 = ORIENTED_EDGE('',*,*,#335390,.F.); +#335390 = EDGE_CURVE('',#335391,#335382,#335393,.T.); +#335391 = VERTEX_POINT('',#335392); +#335392 = CARTESIAN_POINT('',(120.925,-103.025,1.51)); +#335393 = LINE('',#335394,#335395); +#335394 = CARTESIAN_POINT('',(120.925,-103.025,1.51)); +#335395 = VECTOR('',#335396,1.); +#335396 = DIRECTION('',(0.,0.,1.)); +#335397 = ORIENTED_EDGE('',*,*,#335398,.F.); +#335398 = EDGE_CURVE('',#335359,#335391,#335399,.T.); +#335399 = CIRCLE('',#335400,0.225000087974); +#335400 = AXIS2_PLACEMENT_3D('',#335401,#335402,#335403); +#335401 = CARTESIAN_POINT('',(120.92499991202,-102.799999912,1.51)); +#335402 = DIRECTION('',(0.,0.,-1.)); +#335403 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#335404 = CYLINDRICAL_SURFACE('',#335405,0.225000087974); +#335405 = AXIS2_PLACEMENT_3D('',#335406,#335407,#335408); +#335406 = CARTESIAN_POINT('',(120.92499991202,-102.799999912,1.51)); +#335407 = DIRECTION('',(0.,0.,-1.)); +#335408 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#335409 = ADVANCED_FACE('',(#335410),#335435,.T.); +#335410 = FACE_BOUND('',#335411,.T.); +#335411 = EDGE_LOOP('',(#335412,#335413,#335421,#335429)); +#335412 = ORIENTED_EDGE('',*,*,#335390,.T.); +#335413 = ORIENTED_EDGE('',*,*,#335414,.T.); +#335414 = EDGE_CURVE('',#335382,#335415,#335417,.T.); +#335415 = VERTEX_POINT('',#335416); +#335416 = CARTESIAN_POINT('',(120.475,-103.025,1.55)); +#335417 = LINE('',#335418,#335419); +#335418 = CARTESIAN_POINT('',(120.925,-103.025,1.55)); +#335419 = VECTOR('',#335420,1.); +#335420 = DIRECTION('',(-1.,0.,0.)); +#335421 = ORIENTED_EDGE('',*,*,#335422,.F.); +#335422 = EDGE_CURVE('',#335423,#335415,#335425,.T.); +#335423 = VERTEX_POINT('',#335424); +#335424 = CARTESIAN_POINT('',(120.475,-103.025,1.51)); +#335425 = LINE('',#335426,#335427); +#335426 = CARTESIAN_POINT('',(120.475,-103.025,1.51)); +#335427 = VECTOR('',#335428,1.); +#335428 = DIRECTION('',(0.,0.,1.)); +#335429 = ORIENTED_EDGE('',*,*,#335430,.F.); +#335430 = EDGE_CURVE('',#335391,#335423,#335431,.T.); +#335431 = LINE('',#335432,#335433); +#335432 = CARTESIAN_POINT('',(120.925,-103.025,1.51)); +#335433 = VECTOR('',#335434,1.); +#335434 = DIRECTION('',(-1.,0.,0.)); +#335435 = PLANE('',#335436); +#335436 = AXIS2_PLACEMENT_3D('',#335437,#335438,#335439); +#335437 = CARTESIAN_POINT('',(120.925,-103.025,1.51)); +#335438 = DIRECTION('',(0.,-1.,0.)); +#335439 = DIRECTION('',(-1.,0.,0.)); +#335440 = ADVANCED_FACE('',(#335441),#335468,.T.); +#335441 = FACE_BOUND('',#335442,.T.); +#335442 = EDGE_LOOP('',(#335443,#335444,#335453,#335461)); +#335443 = ORIENTED_EDGE('',*,*,#335422,.T.); +#335444 = ORIENTED_EDGE('',*,*,#335445,.T.); +#335445 = EDGE_CURVE('',#335415,#335446,#335448,.T.); +#335446 = VERTEX_POINT('',#335447); +#335447 = CARTESIAN_POINT('',(120.25,-102.8,1.55)); +#335448 = CIRCLE('',#335449,0.225000087974); +#335449 = AXIS2_PLACEMENT_3D('',#335450,#335451,#335452); +#335450 = CARTESIAN_POINT('',(120.47500008797,-102.799999912,1.55)); +#335451 = DIRECTION('',(0.,0.,-1.)); +#335452 = DIRECTION('',(-3.909954721353E-07,-1.,-0.)); +#335453 = ORIENTED_EDGE('',*,*,#335454,.F.); +#335454 = EDGE_CURVE('',#335455,#335446,#335457,.T.); +#335455 = VERTEX_POINT('',#335456); +#335456 = CARTESIAN_POINT('',(120.25,-102.8,1.51)); +#335457 = LINE('',#335458,#335459); +#335458 = CARTESIAN_POINT('',(120.25,-102.8,1.51)); +#335459 = VECTOR('',#335460,1.); +#335460 = DIRECTION('',(0.,0.,1.)); +#335461 = ORIENTED_EDGE('',*,*,#335462,.F.); +#335462 = EDGE_CURVE('',#335423,#335455,#335463,.T.); +#335463 = CIRCLE('',#335464,0.225000087974); +#335464 = AXIS2_PLACEMENT_3D('',#335465,#335466,#335467); +#335465 = CARTESIAN_POINT('',(120.47500008797,-102.799999912,1.51)); +#335466 = DIRECTION('',(0.,0.,-1.)); +#335467 = DIRECTION('',(-3.909954721353E-07,-1.,-0.)); +#335468 = CYLINDRICAL_SURFACE('',#335469,0.225000087974); +#335469 = AXIS2_PLACEMENT_3D('',#335470,#335471,#335472); +#335470 = CARTESIAN_POINT('',(120.47500008797,-102.799999912,1.51)); +#335471 = DIRECTION('',(0.,0.,-1.)); +#335472 = DIRECTION('',(-3.909954721353E-07,-1.,-0.)); +#335473 = ADVANCED_FACE('',(#335474),#335490,.T.); +#335474 = FACE_BOUND('',#335475,.T.); +#335475 = EDGE_LOOP('',(#335476,#335477,#335483,#335484)); +#335476 = ORIENTED_EDGE('',*,*,#335454,.T.); +#335477 = ORIENTED_EDGE('',*,*,#335478,.T.); +#335478 = EDGE_CURVE('',#335446,#335246,#335479,.T.); +#335479 = LINE('',#335480,#335481); +#335480 = CARTESIAN_POINT('',(120.25,-102.8,1.55)); +#335481 = VECTOR('',#335482,1.); +#335482 = DIRECTION('',(0.,1.,0.)); +#335483 = ORIENTED_EDGE('',*,*,#335243,.F.); +#335484 = ORIENTED_EDGE('',*,*,#335485,.F.); +#335485 = EDGE_CURVE('',#335455,#335244,#335486,.T.); +#335486 = LINE('',#335487,#335488); +#335487 = CARTESIAN_POINT('',(120.25,-102.8,1.51)); +#335488 = VECTOR('',#335489,1.); +#335489 = DIRECTION('',(0.,1.,0.)); +#335490 = PLANE('',#335491); +#335491 = AXIS2_PLACEMENT_3D('',#335492,#335493,#335494); +#335492 = CARTESIAN_POINT('',(120.25,-102.8,1.51)); +#335493 = DIRECTION('',(-1.,0.,0.)); +#335494 = DIRECTION('',(0.,1.,0.)); +#335495 = ADVANCED_FACE('',(#335496),#335506,.F.); +#335496 = FACE_BOUND('',#335497,.T.); +#335497 = EDGE_LOOP('',(#335498,#335499,#335500,#335501,#335502,#335503, + #335504,#335505)); +#335498 = ORIENTED_EDGE('',*,*,#335270,.T.); +#335499 = ORIENTED_EDGE('',*,*,#335302,.T.); +#335500 = ORIENTED_EDGE('',*,*,#335334,.T.); +#335501 = ORIENTED_EDGE('',*,*,#335366,.T.); +#335502 = ORIENTED_EDGE('',*,*,#335398,.T.); +#335503 = ORIENTED_EDGE('',*,*,#335430,.T.); +#335504 = ORIENTED_EDGE('',*,*,#335462,.T.); +#335505 = ORIENTED_EDGE('',*,*,#335485,.T.); +#335506 = PLANE('',#335507); +#335507 = AXIS2_PLACEMENT_3D('',#335508,#335509,#335510); +#335508 = CARTESIAN_POINT('',(0.,0.,1.51)); +#335509 = DIRECTION('',(0.,0.,1.)); +#335510 = DIRECTION('',(1.,0.,-0.)); +#335511 = ADVANCED_FACE('',(#335512),#335522,.T.); +#335512 = FACE_BOUND('',#335513,.F.); +#335513 = EDGE_LOOP('',(#335514,#335515,#335516,#335517,#335518,#335519, + #335520,#335521)); +#335514 = ORIENTED_EDGE('',*,*,#335253,.T.); +#335515 = ORIENTED_EDGE('',*,*,#335286,.T.); +#335516 = ORIENTED_EDGE('',*,*,#335317,.T.); +#335517 = ORIENTED_EDGE('',*,*,#335350,.T.); +#335518 = ORIENTED_EDGE('',*,*,#335381,.T.); +#335519 = ORIENTED_EDGE('',*,*,#335414,.T.); +#335520 = ORIENTED_EDGE('',*,*,#335445,.T.); +#335521 = ORIENTED_EDGE('',*,*,#335478,.T.); +#335522 = PLANE('',#335523); +#335523 = AXIS2_PLACEMENT_3D('',#335524,#335525,#335526); +#335524 = CARTESIAN_POINT('',(0.,0.,1.55)); +#335525 = DIRECTION('',(0.,0.,1.)); +#335526 = DIRECTION('',(1.,0.,-0.)); +#335527 = MANIFOLD_SOLID_BREP('',#335528); +#335528 = CLOSED_SHELL('',(#335529,#335571,#335602,#335635,#335666, + #335699,#335730,#335763,#335785,#335801)); +#335529 = ADVANCED_FACE('',(#335530),#335566,.T.); +#335530 = FACE_BOUND('',#335531,.T.); +#335531 = EDGE_LOOP('',(#335532,#335542,#335551,#335559)); +#335532 = ORIENTED_EDGE('',*,*,#335533,.T.); +#335533 = EDGE_CURVE('',#335534,#335536,#335538,.T.); +#335534 = VERTEX_POINT('',#335535); +#335535 = CARTESIAN_POINT('',(153.8,-91.925,1.51)); +#335536 = VERTEX_POINT('',#335537); +#335537 = CARTESIAN_POINT('',(153.8,-91.925,1.55)); +#335538 = LINE('',#335539,#335540); +#335539 = CARTESIAN_POINT('',(153.8,-91.925,1.51)); +#335540 = VECTOR('',#335541,1.); +#335541 = DIRECTION('',(0.,0.,1.)); +#335542 = ORIENTED_EDGE('',*,*,#335543,.T.); +#335543 = EDGE_CURVE('',#335536,#335544,#335546,.T.); +#335544 = VERTEX_POINT('',#335545); +#335545 = CARTESIAN_POINT('',(154.025,-91.7,1.55)); +#335546 = CIRCLE('',#335547,0.225000087974); +#335547 = AXIS2_PLACEMENT_3D('',#335548,#335549,#335550); +#335548 = CARTESIAN_POINT('',(154.02500008797,-91.92500008797,1.55)); +#335549 = DIRECTION('',(0.,0.,-1.)); +#335550 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335551 = ORIENTED_EDGE('',*,*,#335552,.F.); +#335552 = EDGE_CURVE('',#335553,#335544,#335555,.T.); +#335553 = VERTEX_POINT('',#335554); +#335554 = CARTESIAN_POINT('',(154.025,-91.7,1.51)); +#335555 = LINE('',#335556,#335557); +#335556 = CARTESIAN_POINT('',(154.025,-91.7,1.51)); +#335557 = VECTOR('',#335558,1.); +#335558 = DIRECTION('',(0.,0.,1.)); +#335559 = ORIENTED_EDGE('',*,*,#335560,.F.); +#335560 = EDGE_CURVE('',#335534,#335553,#335561,.T.); +#335561 = CIRCLE('',#335562,0.225000087974); +#335562 = AXIS2_PLACEMENT_3D('',#335563,#335564,#335565); +#335563 = CARTESIAN_POINT('',(154.02500008797,-91.92500008797,1.51)); +#335564 = DIRECTION('',(0.,0.,-1.)); +#335565 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335566 = CYLINDRICAL_SURFACE('',#335567,0.225000087974); +#335567 = AXIS2_PLACEMENT_3D('',#335568,#335569,#335570); +#335568 = CARTESIAN_POINT('',(154.02500008797,-91.92500008797,1.51)); +#335569 = DIRECTION('',(0.,0.,-1.)); +#335570 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335571 = ADVANCED_FACE('',(#335572),#335597,.T.); +#335572 = FACE_BOUND('',#335573,.T.); +#335573 = EDGE_LOOP('',(#335574,#335575,#335583,#335591)); +#335574 = ORIENTED_EDGE('',*,*,#335552,.T.); +#335575 = ORIENTED_EDGE('',*,*,#335576,.T.); +#335576 = EDGE_CURVE('',#335544,#335577,#335579,.T.); +#335577 = VERTEX_POINT('',#335578); +#335578 = CARTESIAN_POINT('',(154.475,-91.7,1.55)); +#335579 = LINE('',#335580,#335581); +#335580 = CARTESIAN_POINT('',(154.025,-91.7,1.55)); +#335581 = VECTOR('',#335582,1.); +#335582 = DIRECTION('',(1.,0.,0.)); +#335583 = ORIENTED_EDGE('',*,*,#335584,.F.); +#335584 = EDGE_CURVE('',#335585,#335577,#335587,.T.); +#335585 = VERTEX_POINT('',#335586); +#335586 = CARTESIAN_POINT('',(154.475,-91.7,1.51)); +#335587 = LINE('',#335588,#335589); +#335588 = CARTESIAN_POINT('',(154.475,-91.7,1.51)); +#335589 = VECTOR('',#335590,1.); +#335590 = DIRECTION('',(0.,0.,1.)); +#335591 = ORIENTED_EDGE('',*,*,#335592,.F.); +#335592 = EDGE_CURVE('',#335553,#335585,#335593,.T.); +#335593 = LINE('',#335594,#335595); +#335594 = CARTESIAN_POINT('',(154.025,-91.7,1.51)); +#335595 = VECTOR('',#335596,1.); +#335596 = DIRECTION('',(1.,0.,0.)); +#335597 = PLANE('',#335598); +#335598 = AXIS2_PLACEMENT_3D('',#335599,#335600,#335601); +#335599 = CARTESIAN_POINT('',(154.025,-91.7,1.51)); +#335600 = DIRECTION('',(0.,1.,0.)); +#335601 = DIRECTION('',(1.,0.,0.)); +#335602 = ADVANCED_FACE('',(#335603),#335630,.T.); +#335603 = FACE_BOUND('',#335604,.T.); +#335604 = EDGE_LOOP('',(#335605,#335606,#335615,#335623)); +#335605 = ORIENTED_EDGE('',*,*,#335584,.T.); +#335606 = ORIENTED_EDGE('',*,*,#335607,.T.); +#335607 = EDGE_CURVE('',#335577,#335608,#335610,.T.); +#335608 = VERTEX_POINT('',#335609); +#335609 = CARTESIAN_POINT('',(154.7,-91.925,1.55)); +#335610 = CIRCLE('',#335611,0.225000087974); +#335611 = AXIS2_PLACEMENT_3D('',#335612,#335613,#335614); +#335612 = CARTESIAN_POINT('',(154.47499991202,-91.92500008797,1.55)); +#335613 = DIRECTION('',(0.,0.,-1.)); +#335614 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335615 = ORIENTED_EDGE('',*,*,#335616,.F.); +#335616 = EDGE_CURVE('',#335617,#335608,#335619,.T.); +#335617 = VERTEX_POINT('',#335618); +#335618 = CARTESIAN_POINT('',(154.7,-91.925,1.51)); +#335619 = LINE('',#335620,#335621); +#335620 = CARTESIAN_POINT('',(154.7,-91.925,1.51)); +#335621 = VECTOR('',#335622,1.); +#335622 = DIRECTION('',(0.,0.,1.)); +#335623 = ORIENTED_EDGE('',*,*,#335624,.F.); +#335624 = EDGE_CURVE('',#335585,#335617,#335625,.T.); +#335625 = CIRCLE('',#335626,0.225000087974); +#335626 = AXIS2_PLACEMENT_3D('',#335627,#335628,#335629); +#335627 = CARTESIAN_POINT('',(154.47499991202,-91.92500008797,1.51)); +#335628 = DIRECTION('',(0.,0.,-1.)); +#335629 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335630 = CYLINDRICAL_SURFACE('',#335631,0.225000087974); +#335631 = AXIS2_PLACEMENT_3D('',#335632,#335633,#335634); +#335632 = CARTESIAN_POINT('',(154.47499991202,-91.92500008797,1.51)); +#335633 = DIRECTION('',(0.,0.,-1.)); +#335634 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335635 = ADVANCED_FACE('',(#335636),#335661,.T.); +#335636 = FACE_BOUND('',#335637,.T.); +#335637 = EDGE_LOOP('',(#335638,#335639,#335647,#335655)); +#335638 = ORIENTED_EDGE('',*,*,#335616,.T.); +#335639 = ORIENTED_EDGE('',*,*,#335640,.T.); +#335640 = EDGE_CURVE('',#335608,#335641,#335643,.T.); +#335641 = VERTEX_POINT('',#335642); +#335642 = CARTESIAN_POINT('',(154.7,-92.775,1.55)); +#335643 = LINE('',#335644,#335645); +#335644 = CARTESIAN_POINT('',(154.7,-91.925,1.55)); +#335645 = VECTOR('',#335646,1.); +#335646 = DIRECTION('',(0.,-1.,0.)); +#335647 = ORIENTED_EDGE('',*,*,#335648,.F.); +#335648 = EDGE_CURVE('',#335649,#335641,#335651,.T.); +#335649 = VERTEX_POINT('',#335650); +#335650 = CARTESIAN_POINT('',(154.7,-92.775,1.51)); +#335651 = LINE('',#335652,#335653); +#335652 = CARTESIAN_POINT('',(154.7,-92.775,1.51)); +#335653 = VECTOR('',#335654,1.); +#335654 = DIRECTION('',(0.,0.,1.)); +#335655 = ORIENTED_EDGE('',*,*,#335656,.F.); +#335656 = EDGE_CURVE('',#335617,#335649,#335657,.T.); +#335657 = LINE('',#335658,#335659); +#335658 = CARTESIAN_POINT('',(154.7,-91.925,1.51)); +#335659 = VECTOR('',#335660,1.); +#335660 = DIRECTION('',(0.,-1.,0.)); +#335661 = PLANE('',#335662); +#335662 = AXIS2_PLACEMENT_3D('',#335663,#335664,#335665); +#335663 = CARTESIAN_POINT('',(154.7,-91.925,1.51)); +#335664 = DIRECTION('',(1.,0.,-0.)); +#335665 = DIRECTION('',(0.,-1.,0.)); +#335666 = ADVANCED_FACE('',(#335667),#335694,.T.); +#335667 = FACE_BOUND('',#335668,.T.); +#335668 = EDGE_LOOP('',(#335669,#335670,#335679,#335687)); +#335669 = ORIENTED_EDGE('',*,*,#335648,.T.); +#335670 = ORIENTED_EDGE('',*,*,#335671,.T.); +#335671 = EDGE_CURVE('',#335641,#335672,#335674,.T.); +#335672 = VERTEX_POINT('',#335673); +#335673 = CARTESIAN_POINT('',(154.475,-93.,1.55)); +#335674 = CIRCLE('',#335675,0.225000087974); +#335675 = AXIS2_PLACEMENT_3D('',#335676,#335677,#335678); +#335676 = CARTESIAN_POINT('',(154.47499991202,-92.77499991202,1.55)); +#335677 = DIRECTION('',(0.,0.,-1.)); +#335678 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335679 = ORIENTED_EDGE('',*,*,#335680,.F.); +#335680 = EDGE_CURVE('',#335681,#335672,#335683,.T.); +#335681 = VERTEX_POINT('',#335682); +#335682 = CARTESIAN_POINT('',(154.475,-93.,1.51)); +#335683 = LINE('',#335684,#335685); +#335684 = CARTESIAN_POINT('',(154.475,-93.,1.51)); +#335685 = VECTOR('',#335686,1.); +#335686 = DIRECTION('',(0.,0.,1.)); +#335687 = ORIENTED_EDGE('',*,*,#335688,.F.); +#335688 = EDGE_CURVE('',#335649,#335681,#335689,.T.); +#335689 = CIRCLE('',#335690,0.225000087974); +#335690 = AXIS2_PLACEMENT_3D('',#335691,#335692,#335693); +#335691 = CARTESIAN_POINT('',(154.47499991202,-92.77499991202,1.51)); +#335692 = DIRECTION('',(0.,0.,-1.)); +#335693 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335694 = CYLINDRICAL_SURFACE('',#335695,0.225000087974); +#335695 = AXIS2_PLACEMENT_3D('',#335696,#335697,#335698); +#335696 = CARTESIAN_POINT('',(154.47499991202,-92.77499991202,1.51)); +#335697 = DIRECTION('',(0.,0.,-1.)); +#335698 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335699 = ADVANCED_FACE('',(#335700),#335725,.T.); +#335700 = FACE_BOUND('',#335701,.T.); +#335701 = EDGE_LOOP('',(#335702,#335703,#335711,#335719)); +#335702 = ORIENTED_EDGE('',*,*,#335680,.T.); +#335703 = ORIENTED_EDGE('',*,*,#335704,.T.); +#335704 = EDGE_CURVE('',#335672,#335705,#335707,.T.); +#335705 = VERTEX_POINT('',#335706); +#335706 = CARTESIAN_POINT('',(154.025,-93.,1.55)); +#335707 = LINE('',#335708,#335709); +#335708 = CARTESIAN_POINT('',(154.475,-93.,1.55)); +#335709 = VECTOR('',#335710,1.); +#335710 = DIRECTION('',(-1.,0.,0.)); +#335711 = ORIENTED_EDGE('',*,*,#335712,.F.); +#335712 = EDGE_CURVE('',#335713,#335705,#335715,.T.); +#335713 = VERTEX_POINT('',#335714); +#335714 = CARTESIAN_POINT('',(154.025,-93.,1.51)); +#335715 = LINE('',#335716,#335717); +#335716 = CARTESIAN_POINT('',(154.025,-93.,1.51)); +#335717 = VECTOR('',#335718,1.); +#335718 = DIRECTION('',(0.,0.,1.)); +#335719 = ORIENTED_EDGE('',*,*,#335720,.F.); +#335720 = EDGE_CURVE('',#335681,#335713,#335721,.T.); +#335721 = LINE('',#335722,#335723); +#335722 = CARTESIAN_POINT('',(154.475,-93.,1.51)); +#335723 = VECTOR('',#335724,1.); +#335724 = DIRECTION('',(-1.,0.,0.)); +#335725 = PLANE('',#335726); +#335726 = AXIS2_PLACEMENT_3D('',#335727,#335728,#335729); +#335727 = CARTESIAN_POINT('',(154.475,-93.,1.51)); +#335728 = DIRECTION('',(0.,-1.,0.)); +#335729 = DIRECTION('',(-1.,0.,0.)); +#335730 = ADVANCED_FACE('',(#335731),#335758,.T.); +#335731 = FACE_BOUND('',#335732,.T.); +#335732 = EDGE_LOOP('',(#335733,#335734,#335743,#335751)); +#335733 = ORIENTED_EDGE('',*,*,#335712,.T.); +#335734 = ORIENTED_EDGE('',*,*,#335735,.T.); +#335735 = EDGE_CURVE('',#335705,#335736,#335738,.T.); +#335736 = VERTEX_POINT('',#335737); +#335737 = CARTESIAN_POINT('',(153.8,-92.775,1.55)); +#335738 = CIRCLE('',#335739,0.225000087974); +#335739 = AXIS2_PLACEMENT_3D('',#335740,#335741,#335742); +#335740 = CARTESIAN_POINT('',(154.02500008797,-92.77499991202,1.55)); +#335741 = DIRECTION('',(0.,0.,-1.)); +#335742 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#335743 = ORIENTED_EDGE('',*,*,#335744,.F.); +#335744 = EDGE_CURVE('',#335745,#335736,#335747,.T.); +#335745 = VERTEX_POINT('',#335746); +#335746 = CARTESIAN_POINT('',(153.8,-92.775,1.51)); +#335747 = LINE('',#335748,#335749); +#335748 = CARTESIAN_POINT('',(153.8,-92.775,1.51)); +#335749 = VECTOR('',#335750,1.); +#335750 = DIRECTION('',(0.,0.,1.)); +#335751 = ORIENTED_EDGE('',*,*,#335752,.F.); +#335752 = EDGE_CURVE('',#335713,#335745,#335753,.T.); +#335753 = CIRCLE('',#335754,0.225000087974); +#335754 = AXIS2_PLACEMENT_3D('',#335755,#335756,#335757); +#335755 = CARTESIAN_POINT('',(154.02500008797,-92.77499991202,1.51)); +#335756 = DIRECTION('',(0.,0.,-1.)); +#335757 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#335758 = CYLINDRICAL_SURFACE('',#335759,0.225000087974); +#335759 = AXIS2_PLACEMENT_3D('',#335760,#335761,#335762); +#335760 = CARTESIAN_POINT('',(154.02500008797,-92.77499991202,1.51)); +#335761 = DIRECTION('',(0.,0.,-1.)); +#335762 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#335763 = ADVANCED_FACE('',(#335764),#335780,.T.); +#335764 = FACE_BOUND('',#335765,.T.); +#335765 = EDGE_LOOP('',(#335766,#335767,#335773,#335774)); +#335766 = ORIENTED_EDGE('',*,*,#335744,.T.); +#335767 = ORIENTED_EDGE('',*,*,#335768,.T.); +#335768 = EDGE_CURVE('',#335736,#335536,#335769,.T.); +#335769 = LINE('',#335770,#335771); +#335770 = CARTESIAN_POINT('',(153.8,-92.775,1.55)); +#335771 = VECTOR('',#335772,1.); +#335772 = DIRECTION('',(0.,1.,0.)); +#335773 = ORIENTED_EDGE('',*,*,#335533,.F.); +#335774 = ORIENTED_EDGE('',*,*,#335775,.F.); +#335775 = EDGE_CURVE('',#335745,#335534,#335776,.T.); +#335776 = LINE('',#335777,#335778); +#335777 = CARTESIAN_POINT('',(153.8,-92.775,1.51)); +#335778 = VECTOR('',#335779,1.); +#335779 = DIRECTION('',(0.,1.,0.)); +#335780 = PLANE('',#335781); +#335781 = AXIS2_PLACEMENT_3D('',#335782,#335783,#335784); +#335782 = CARTESIAN_POINT('',(153.8,-92.775,1.51)); +#335783 = DIRECTION('',(-1.,0.,0.)); +#335784 = DIRECTION('',(0.,1.,0.)); +#335785 = ADVANCED_FACE('',(#335786),#335796,.F.); +#335786 = FACE_BOUND('',#335787,.T.); +#335787 = EDGE_LOOP('',(#335788,#335789,#335790,#335791,#335792,#335793, + #335794,#335795)); +#335788 = ORIENTED_EDGE('',*,*,#335560,.T.); +#335789 = ORIENTED_EDGE('',*,*,#335592,.T.); +#335790 = ORIENTED_EDGE('',*,*,#335624,.T.); +#335791 = ORIENTED_EDGE('',*,*,#335656,.T.); +#335792 = ORIENTED_EDGE('',*,*,#335688,.T.); +#335793 = ORIENTED_EDGE('',*,*,#335720,.T.); +#335794 = ORIENTED_EDGE('',*,*,#335752,.T.); +#335795 = ORIENTED_EDGE('',*,*,#335775,.T.); +#335796 = PLANE('',#335797); +#335797 = AXIS2_PLACEMENT_3D('',#335798,#335799,#335800); +#335798 = CARTESIAN_POINT('',(0.,0.,1.51)); +#335799 = DIRECTION('',(0.,0.,1.)); +#335800 = DIRECTION('',(1.,0.,-0.)); +#335801 = ADVANCED_FACE('',(#335802),#335812,.T.); +#335802 = FACE_BOUND('',#335803,.F.); +#335803 = EDGE_LOOP('',(#335804,#335805,#335806,#335807,#335808,#335809, + #335810,#335811)); +#335804 = ORIENTED_EDGE('',*,*,#335543,.T.); +#335805 = ORIENTED_EDGE('',*,*,#335576,.T.); +#335806 = ORIENTED_EDGE('',*,*,#335607,.T.); +#335807 = ORIENTED_EDGE('',*,*,#335640,.T.); +#335808 = ORIENTED_EDGE('',*,*,#335671,.T.); +#335809 = ORIENTED_EDGE('',*,*,#335704,.T.); +#335810 = ORIENTED_EDGE('',*,*,#335735,.T.); +#335811 = ORIENTED_EDGE('',*,*,#335768,.T.); +#335812 = PLANE('',#335813); +#335813 = AXIS2_PLACEMENT_3D('',#335814,#335815,#335816); +#335814 = CARTESIAN_POINT('',(0.,0.,1.55)); +#335815 = DIRECTION('',(0.,0.,1.)); +#335816 = DIRECTION('',(1.,0.,-0.)); +#335817 = MANIFOLD_SOLID_BREP('',#335818); +#335818 = CLOSED_SHELL('',(#335819,#335861,#335892,#335925,#335956, + #335989,#336020,#336053,#336075,#336091)); +#335819 = ADVANCED_FACE('',(#335820),#335856,.T.); +#335820 = FACE_BOUND('',#335821,.T.); +#335821 = EDGE_LOOP('',(#335822,#335832,#335841,#335849)); +#335822 = ORIENTED_EDGE('',*,*,#335823,.T.); +#335823 = EDGE_CURVE('',#335824,#335826,#335828,.T.); +#335824 = VERTEX_POINT('',#335825); +#335825 = CARTESIAN_POINT('',(153.8,-88.225,1.51)); +#335826 = VERTEX_POINT('',#335827); +#335827 = CARTESIAN_POINT('',(153.8,-88.225,1.55)); +#335828 = LINE('',#335829,#335830); +#335829 = CARTESIAN_POINT('',(153.8,-88.225,1.51)); +#335830 = VECTOR('',#335831,1.); +#335831 = DIRECTION('',(0.,0.,1.)); +#335832 = ORIENTED_EDGE('',*,*,#335833,.T.); +#335833 = EDGE_CURVE('',#335826,#335834,#335836,.T.); +#335834 = VERTEX_POINT('',#335835); +#335835 = CARTESIAN_POINT('',(154.025,-88.,1.55)); +#335836 = CIRCLE('',#335837,0.225000087974); +#335837 = AXIS2_PLACEMENT_3D('',#335838,#335839,#335840); +#335838 = CARTESIAN_POINT('',(154.02500008797,-88.22500008797,1.55)); +#335839 = DIRECTION('',(0.,0.,-1.)); +#335840 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335841 = ORIENTED_EDGE('',*,*,#335842,.F.); +#335842 = EDGE_CURVE('',#335843,#335834,#335845,.T.); +#335843 = VERTEX_POINT('',#335844); +#335844 = CARTESIAN_POINT('',(154.025,-88.,1.51)); +#335845 = LINE('',#335846,#335847); +#335846 = CARTESIAN_POINT('',(154.025,-88.,1.51)); +#335847 = VECTOR('',#335848,1.); +#335848 = DIRECTION('',(0.,0.,1.)); +#335849 = ORIENTED_EDGE('',*,*,#335850,.F.); +#335850 = EDGE_CURVE('',#335824,#335843,#335851,.T.); +#335851 = CIRCLE('',#335852,0.225000087974); +#335852 = AXIS2_PLACEMENT_3D('',#335853,#335854,#335855); +#335853 = CARTESIAN_POINT('',(154.02500008797,-88.22500008797,1.51)); +#335854 = DIRECTION('',(0.,0.,-1.)); +#335855 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335856 = CYLINDRICAL_SURFACE('',#335857,0.225000087974); +#335857 = AXIS2_PLACEMENT_3D('',#335858,#335859,#335860); +#335858 = CARTESIAN_POINT('',(154.02500008797,-88.22500008797,1.51)); +#335859 = DIRECTION('',(0.,0.,-1.)); +#335860 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#335861 = ADVANCED_FACE('',(#335862),#335887,.T.); +#335862 = FACE_BOUND('',#335863,.T.); +#335863 = EDGE_LOOP('',(#335864,#335865,#335873,#335881)); +#335864 = ORIENTED_EDGE('',*,*,#335842,.T.); +#335865 = ORIENTED_EDGE('',*,*,#335866,.T.); +#335866 = EDGE_CURVE('',#335834,#335867,#335869,.T.); +#335867 = VERTEX_POINT('',#335868); +#335868 = CARTESIAN_POINT('',(154.475,-88.,1.55)); +#335869 = LINE('',#335870,#335871); +#335870 = CARTESIAN_POINT('',(154.025,-88.,1.55)); +#335871 = VECTOR('',#335872,1.); +#335872 = DIRECTION('',(1.,0.,0.)); +#335873 = ORIENTED_EDGE('',*,*,#335874,.F.); +#335874 = EDGE_CURVE('',#335875,#335867,#335877,.T.); +#335875 = VERTEX_POINT('',#335876); +#335876 = CARTESIAN_POINT('',(154.475,-88.,1.51)); +#335877 = LINE('',#335878,#335879); +#335878 = CARTESIAN_POINT('',(154.475,-88.,1.51)); +#335879 = VECTOR('',#335880,1.); +#335880 = DIRECTION('',(0.,0.,1.)); +#335881 = ORIENTED_EDGE('',*,*,#335882,.F.); +#335882 = EDGE_CURVE('',#335843,#335875,#335883,.T.); +#335883 = LINE('',#335884,#335885); +#335884 = CARTESIAN_POINT('',(154.025,-88.,1.51)); +#335885 = VECTOR('',#335886,1.); +#335886 = DIRECTION('',(1.,0.,0.)); +#335887 = PLANE('',#335888); +#335888 = AXIS2_PLACEMENT_3D('',#335889,#335890,#335891); +#335889 = CARTESIAN_POINT('',(154.025,-88.,1.51)); +#335890 = DIRECTION('',(0.,1.,0.)); +#335891 = DIRECTION('',(1.,0.,0.)); +#335892 = ADVANCED_FACE('',(#335893),#335920,.T.); +#335893 = FACE_BOUND('',#335894,.T.); +#335894 = EDGE_LOOP('',(#335895,#335896,#335905,#335913)); +#335895 = ORIENTED_EDGE('',*,*,#335874,.T.); +#335896 = ORIENTED_EDGE('',*,*,#335897,.T.); +#335897 = EDGE_CURVE('',#335867,#335898,#335900,.T.); +#335898 = VERTEX_POINT('',#335899); +#335899 = CARTESIAN_POINT('',(154.7,-88.225,1.55)); +#335900 = CIRCLE('',#335901,0.225000087974); +#335901 = AXIS2_PLACEMENT_3D('',#335902,#335903,#335904); +#335902 = CARTESIAN_POINT('',(154.47499991202,-88.22500008797,1.55)); +#335903 = DIRECTION('',(0.,0.,-1.)); +#335904 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335905 = ORIENTED_EDGE('',*,*,#335906,.F.); +#335906 = EDGE_CURVE('',#335907,#335898,#335909,.T.); +#335907 = VERTEX_POINT('',#335908); +#335908 = CARTESIAN_POINT('',(154.7,-88.225,1.51)); +#335909 = LINE('',#335910,#335911); +#335910 = CARTESIAN_POINT('',(154.7,-88.225,1.51)); +#335911 = VECTOR('',#335912,1.); +#335912 = DIRECTION('',(0.,0.,1.)); +#335913 = ORIENTED_EDGE('',*,*,#335914,.F.); +#335914 = EDGE_CURVE('',#335875,#335907,#335915,.T.); +#335915 = CIRCLE('',#335916,0.225000087974); +#335916 = AXIS2_PLACEMENT_3D('',#335917,#335918,#335919); +#335917 = CARTESIAN_POINT('',(154.47499991202,-88.22500008797,1.51)); +#335918 = DIRECTION('',(0.,0.,-1.)); +#335919 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335920 = CYLINDRICAL_SURFACE('',#335921,0.225000087974); +#335921 = AXIS2_PLACEMENT_3D('',#335922,#335923,#335924); +#335922 = CARTESIAN_POINT('',(154.47499991202,-88.22500008797,1.51)); +#335923 = DIRECTION('',(0.,0.,-1.)); +#335924 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#335925 = ADVANCED_FACE('',(#335926),#335951,.T.); +#335926 = FACE_BOUND('',#335927,.T.); +#335927 = EDGE_LOOP('',(#335928,#335929,#335937,#335945)); +#335928 = ORIENTED_EDGE('',*,*,#335906,.T.); +#335929 = ORIENTED_EDGE('',*,*,#335930,.T.); +#335930 = EDGE_CURVE('',#335898,#335931,#335933,.T.); +#335931 = VERTEX_POINT('',#335932); +#335932 = CARTESIAN_POINT('',(154.7,-89.075,1.55)); +#335933 = LINE('',#335934,#335935); +#335934 = CARTESIAN_POINT('',(154.7,-88.225,1.55)); +#335935 = VECTOR('',#335936,1.); +#335936 = DIRECTION('',(0.,-1.,0.)); +#335937 = ORIENTED_EDGE('',*,*,#335938,.F.); +#335938 = EDGE_CURVE('',#335939,#335931,#335941,.T.); +#335939 = VERTEX_POINT('',#335940); +#335940 = CARTESIAN_POINT('',(154.7,-89.075,1.51)); +#335941 = LINE('',#335942,#335943); +#335942 = CARTESIAN_POINT('',(154.7,-89.075,1.51)); +#335943 = VECTOR('',#335944,1.); +#335944 = DIRECTION('',(0.,0.,1.)); +#335945 = ORIENTED_EDGE('',*,*,#335946,.F.); +#335946 = EDGE_CURVE('',#335907,#335939,#335947,.T.); +#335947 = LINE('',#335948,#335949); +#335948 = CARTESIAN_POINT('',(154.7,-88.225,1.51)); +#335949 = VECTOR('',#335950,1.); +#335950 = DIRECTION('',(0.,-1.,0.)); +#335951 = PLANE('',#335952); +#335952 = AXIS2_PLACEMENT_3D('',#335953,#335954,#335955); +#335953 = CARTESIAN_POINT('',(154.7,-88.225,1.51)); +#335954 = DIRECTION('',(1.,0.,-0.)); +#335955 = DIRECTION('',(0.,-1.,0.)); +#335956 = ADVANCED_FACE('',(#335957),#335984,.T.); +#335957 = FACE_BOUND('',#335958,.T.); +#335958 = EDGE_LOOP('',(#335959,#335960,#335969,#335977)); +#335959 = ORIENTED_EDGE('',*,*,#335938,.T.); +#335960 = ORIENTED_EDGE('',*,*,#335961,.T.); +#335961 = EDGE_CURVE('',#335931,#335962,#335964,.T.); +#335962 = VERTEX_POINT('',#335963); +#335963 = CARTESIAN_POINT('',(154.475,-89.3,1.55)); +#335964 = CIRCLE('',#335965,0.225000087974); +#335965 = AXIS2_PLACEMENT_3D('',#335966,#335967,#335968); +#335966 = CARTESIAN_POINT('',(154.47499991202,-89.07499991202,1.55)); +#335967 = DIRECTION('',(0.,0.,-1.)); +#335968 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335969 = ORIENTED_EDGE('',*,*,#335970,.F.); +#335970 = EDGE_CURVE('',#335971,#335962,#335973,.T.); +#335971 = VERTEX_POINT('',#335972); +#335972 = CARTESIAN_POINT('',(154.475,-89.3,1.51)); +#335973 = LINE('',#335974,#335975); +#335974 = CARTESIAN_POINT('',(154.475,-89.3,1.51)); +#335975 = VECTOR('',#335976,1.); +#335976 = DIRECTION('',(0.,0.,1.)); +#335977 = ORIENTED_EDGE('',*,*,#335978,.F.); +#335978 = EDGE_CURVE('',#335939,#335971,#335979,.T.); +#335979 = CIRCLE('',#335980,0.225000087974); +#335980 = AXIS2_PLACEMENT_3D('',#335981,#335982,#335983); +#335981 = CARTESIAN_POINT('',(154.47499991202,-89.07499991202,1.51)); +#335982 = DIRECTION('',(0.,0.,-1.)); +#335983 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335984 = CYLINDRICAL_SURFACE('',#335985,0.225000087974); +#335985 = AXIS2_PLACEMENT_3D('',#335986,#335987,#335988); +#335986 = CARTESIAN_POINT('',(154.47499991202,-89.07499991202,1.51)); +#335987 = DIRECTION('',(0.,0.,-1.)); +#335988 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#335989 = ADVANCED_FACE('',(#335990),#336015,.T.); +#335990 = FACE_BOUND('',#335991,.T.); +#335991 = EDGE_LOOP('',(#335992,#335993,#336001,#336009)); +#335992 = ORIENTED_EDGE('',*,*,#335970,.T.); +#335993 = ORIENTED_EDGE('',*,*,#335994,.T.); +#335994 = EDGE_CURVE('',#335962,#335995,#335997,.T.); +#335995 = VERTEX_POINT('',#335996); +#335996 = CARTESIAN_POINT('',(154.025,-89.3,1.55)); +#335997 = LINE('',#335998,#335999); +#335998 = CARTESIAN_POINT('',(154.475,-89.3,1.55)); +#335999 = VECTOR('',#336000,1.); +#336000 = DIRECTION('',(-1.,0.,0.)); +#336001 = ORIENTED_EDGE('',*,*,#336002,.F.); +#336002 = EDGE_CURVE('',#336003,#335995,#336005,.T.); +#336003 = VERTEX_POINT('',#336004); +#336004 = CARTESIAN_POINT('',(154.025,-89.3,1.51)); +#336005 = LINE('',#336006,#336007); +#336006 = CARTESIAN_POINT('',(154.025,-89.3,1.51)); +#336007 = VECTOR('',#336008,1.); +#336008 = DIRECTION('',(0.,0.,1.)); +#336009 = ORIENTED_EDGE('',*,*,#336010,.F.); +#336010 = EDGE_CURVE('',#335971,#336003,#336011,.T.); +#336011 = LINE('',#336012,#336013); +#336012 = CARTESIAN_POINT('',(154.475,-89.3,1.51)); +#336013 = VECTOR('',#336014,1.); +#336014 = DIRECTION('',(-1.,0.,0.)); +#336015 = PLANE('',#336016); +#336016 = AXIS2_PLACEMENT_3D('',#336017,#336018,#336019); +#336017 = CARTESIAN_POINT('',(154.475,-89.3,1.51)); +#336018 = DIRECTION('',(0.,-1.,0.)); +#336019 = DIRECTION('',(-1.,0.,0.)); +#336020 = ADVANCED_FACE('',(#336021),#336048,.T.); +#336021 = FACE_BOUND('',#336022,.T.); +#336022 = EDGE_LOOP('',(#336023,#336024,#336033,#336041)); +#336023 = ORIENTED_EDGE('',*,*,#336002,.T.); +#336024 = ORIENTED_EDGE('',*,*,#336025,.T.); +#336025 = EDGE_CURVE('',#335995,#336026,#336028,.T.); +#336026 = VERTEX_POINT('',#336027); +#336027 = CARTESIAN_POINT('',(153.8,-89.075,1.55)); +#336028 = CIRCLE('',#336029,0.225000087974); +#336029 = AXIS2_PLACEMENT_3D('',#336030,#336031,#336032); +#336030 = CARTESIAN_POINT('',(154.02500008797,-89.07499991202,1.55)); +#336031 = DIRECTION('',(0.,0.,-1.)); +#336032 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336033 = ORIENTED_EDGE('',*,*,#336034,.F.); +#336034 = EDGE_CURVE('',#336035,#336026,#336037,.T.); +#336035 = VERTEX_POINT('',#336036); +#336036 = CARTESIAN_POINT('',(153.8,-89.075,1.51)); +#336037 = LINE('',#336038,#336039); +#336038 = CARTESIAN_POINT('',(153.8,-89.075,1.51)); +#336039 = VECTOR('',#336040,1.); +#336040 = DIRECTION('',(0.,0.,1.)); +#336041 = ORIENTED_EDGE('',*,*,#336042,.F.); +#336042 = EDGE_CURVE('',#336003,#336035,#336043,.T.); +#336043 = CIRCLE('',#336044,0.225000087974); +#336044 = AXIS2_PLACEMENT_3D('',#336045,#336046,#336047); +#336045 = CARTESIAN_POINT('',(154.02500008797,-89.07499991202,1.51)); +#336046 = DIRECTION('',(0.,0.,-1.)); +#336047 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336048 = CYLINDRICAL_SURFACE('',#336049,0.225000087974); +#336049 = AXIS2_PLACEMENT_3D('',#336050,#336051,#336052); +#336050 = CARTESIAN_POINT('',(154.02500008797,-89.07499991202,1.51)); +#336051 = DIRECTION('',(0.,0.,-1.)); +#336052 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336053 = ADVANCED_FACE('',(#336054),#336070,.T.); +#336054 = FACE_BOUND('',#336055,.T.); +#336055 = EDGE_LOOP('',(#336056,#336057,#336063,#336064)); +#336056 = ORIENTED_EDGE('',*,*,#336034,.T.); +#336057 = ORIENTED_EDGE('',*,*,#336058,.T.); +#336058 = EDGE_CURVE('',#336026,#335826,#336059,.T.); +#336059 = LINE('',#336060,#336061); +#336060 = CARTESIAN_POINT('',(153.8,-89.075,1.55)); +#336061 = VECTOR('',#336062,1.); +#336062 = DIRECTION('',(0.,1.,0.)); +#336063 = ORIENTED_EDGE('',*,*,#335823,.F.); +#336064 = ORIENTED_EDGE('',*,*,#336065,.F.); +#336065 = EDGE_CURVE('',#336035,#335824,#336066,.T.); +#336066 = LINE('',#336067,#336068); +#336067 = CARTESIAN_POINT('',(153.8,-89.075,1.51)); +#336068 = VECTOR('',#336069,1.); +#336069 = DIRECTION('',(0.,1.,0.)); +#336070 = PLANE('',#336071); +#336071 = AXIS2_PLACEMENT_3D('',#336072,#336073,#336074); +#336072 = CARTESIAN_POINT('',(153.8,-89.075,1.51)); +#336073 = DIRECTION('',(-1.,0.,0.)); +#336074 = DIRECTION('',(0.,1.,0.)); +#336075 = ADVANCED_FACE('',(#336076),#336086,.F.); +#336076 = FACE_BOUND('',#336077,.T.); +#336077 = EDGE_LOOP('',(#336078,#336079,#336080,#336081,#336082,#336083, + #336084,#336085)); +#336078 = ORIENTED_EDGE('',*,*,#335850,.T.); +#336079 = ORIENTED_EDGE('',*,*,#335882,.T.); +#336080 = ORIENTED_EDGE('',*,*,#335914,.T.); +#336081 = ORIENTED_EDGE('',*,*,#335946,.T.); +#336082 = ORIENTED_EDGE('',*,*,#335978,.T.); +#336083 = ORIENTED_EDGE('',*,*,#336010,.T.); +#336084 = ORIENTED_EDGE('',*,*,#336042,.T.); +#336085 = ORIENTED_EDGE('',*,*,#336065,.T.); +#336086 = PLANE('',#336087); +#336087 = AXIS2_PLACEMENT_3D('',#336088,#336089,#336090); +#336088 = CARTESIAN_POINT('',(0.,0.,1.51)); +#336089 = DIRECTION('',(0.,0.,1.)); +#336090 = DIRECTION('',(1.,0.,-0.)); +#336091 = ADVANCED_FACE('',(#336092),#336102,.T.); +#336092 = FACE_BOUND('',#336093,.F.); +#336093 = EDGE_LOOP('',(#336094,#336095,#336096,#336097,#336098,#336099, + #336100,#336101)); +#336094 = ORIENTED_EDGE('',*,*,#335833,.T.); +#336095 = ORIENTED_EDGE('',*,*,#335866,.T.); +#336096 = ORIENTED_EDGE('',*,*,#335897,.T.); +#336097 = ORIENTED_EDGE('',*,*,#335930,.T.); +#336098 = ORIENTED_EDGE('',*,*,#335961,.T.); +#336099 = ORIENTED_EDGE('',*,*,#335994,.T.); +#336100 = ORIENTED_EDGE('',*,*,#336025,.T.); +#336101 = ORIENTED_EDGE('',*,*,#336058,.T.); +#336102 = PLANE('',#336103); +#336103 = AXIS2_PLACEMENT_3D('',#336104,#336105,#336106); +#336104 = CARTESIAN_POINT('',(0.,0.,1.55)); +#336105 = DIRECTION('',(0.,0.,1.)); +#336106 = DIRECTION('',(1.,0.,-0.)); +#336107 = MANIFOLD_SOLID_BREP('',#336108); +#336108 = CLOSED_SHELL('',(#336109,#336142,#336151)); +#336109 = ADVANCED_FACE('',(#336110),#336137,.T.); +#336110 = FACE_BOUND('',#336111,.F.); +#336111 = EDGE_LOOP('',(#336112,#336122,#336129,#336130)); +#336112 = ORIENTED_EDGE('',*,*,#336113,.T.); +#336113 = EDGE_CURVE('',#336114,#336116,#336118,.T.); +#336114 = VERTEX_POINT('',#336115); +#336115 = CARTESIAN_POINT('',(147.5,-150.1,1.51)); +#336116 = VERTEX_POINT('',#336117); +#336117 = CARTESIAN_POINT('',(147.5,-150.1,1.55)); +#336118 = LINE('',#336119,#336120); +#336119 = CARTESIAN_POINT('',(147.5,-150.1,1.51)); +#336120 = VECTOR('',#336121,1.); +#336121 = DIRECTION('',(0.,0.,1.)); +#336122 = ORIENTED_EDGE('',*,*,#336123,.T.); +#336123 = EDGE_CURVE('',#336116,#336116,#336124,.T.); +#336124 = CIRCLE('',#336125,0.5); +#336125 = AXIS2_PLACEMENT_3D('',#336126,#336127,#336128); +#336126 = CARTESIAN_POINT('',(147.,-150.1,1.55)); +#336127 = DIRECTION('',(0.,0.,1.)); +#336128 = DIRECTION('',(1.,0.,-0.)); +#336129 = ORIENTED_EDGE('',*,*,#336113,.F.); +#336130 = ORIENTED_EDGE('',*,*,#336131,.F.); +#336131 = EDGE_CURVE('',#336114,#336114,#336132,.T.); +#336132 = CIRCLE('',#336133,0.5); +#336133 = AXIS2_PLACEMENT_3D('',#336134,#336135,#336136); +#336134 = CARTESIAN_POINT('',(147.,-150.1,1.51)); +#336135 = DIRECTION('',(0.,0.,1.)); +#336136 = DIRECTION('',(1.,0.,-0.)); +#336137 = CYLINDRICAL_SURFACE('',#336138,0.5); +#336138 = AXIS2_PLACEMENT_3D('',#336139,#336140,#336141); +#336139 = CARTESIAN_POINT('',(147.,-150.1,1.51)); +#336140 = DIRECTION('',(-0.,-0.,-1.)); +#336141 = DIRECTION('',(1.,0.,-0.)); +#336142 = ADVANCED_FACE('',(#336143),#336146,.F.); +#336143 = FACE_BOUND('',#336144,.F.); +#336144 = EDGE_LOOP('',(#336145)); +#336145 = ORIENTED_EDGE('',*,*,#336131,.T.); +#336146 = PLANE('',#336147); +#336147 = AXIS2_PLACEMENT_3D('',#336148,#336149,#336150); +#336148 = CARTESIAN_POINT('',(0.,0.,1.51)); +#336149 = DIRECTION('',(0.,0.,1.)); +#336150 = DIRECTION('',(1.,0.,-0.)); +#336151 = ADVANCED_FACE('',(#336152),#336155,.T.); +#336152 = FACE_BOUND('',#336153,.T.); +#336153 = EDGE_LOOP('',(#336154)); +#336154 = ORIENTED_EDGE('',*,*,#336123,.T.); +#336155 = PLANE('',#336156); +#336156 = AXIS2_PLACEMENT_3D('',#336157,#336158,#336159); +#336157 = CARTESIAN_POINT('',(0.,0.,1.55)); +#336158 = DIRECTION('',(0.,0.,1.)); +#336159 = DIRECTION('',(1.,0.,-0.)); +#336160 = MANIFOLD_SOLID_BREP('',#336161); +#336161 = CLOSED_SHELL('',(#336162,#336204,#336235,#336268,#336299, + #336332,#336363,#336396,#336418,#336434)); +#336162 = ADVANCED_FACE('',(#336163),#336199,.T.); +#336163 = FACE_BOUND('',#336164,.T.); +#336164 = EDGE_LOOP('',(#336165,#336175,#336184,#336192)); +#336165 = ORIENTED_EDGE('',*,*,#336166,.T.); +#336166 = EDGE_CURVE('',#336167,#336169,#336171,.T.); +#336167 = VERTEX_POINT('',#336168); +#336168 = CARTESIAN_POINT('',(126.5,-158.775,1.51)); +#336169 = VERTEX_POINT('',#336170); +#336170 = CARTESIAN_POINT('',(126.5,-158.775,1.55)); +#336171 = LINE('',#336172,#336173); +#336172 = CARTESIAN_POINT('',(126.5,-158.775,1.51)); +#336173 = VECTOR('',#336174,1.); +#336174 = DIRECTION('',(0.,0.,1.)); +#336175 = ORIENTED_EDGE('',*,*,#336176,.T.); +#336176 = EDGE_CURVE('',#336169,#336177,#336179,.T.); +#336177 = VERTEX_POINT('',#336178); +#336178 = CARTESIAN_POINT('',(126.725,-158.55,1.55)); +#336179 = CIRCLE('',#336180,0.225000087974); +#336180 = AXIS2_PLACEMENT_3D('',#336181,#336182,#336183); +#336181 = CARTESIAN_POINT('',(126.72500008797,-158.7750000879,1.55)); +#336182 = DIRECTION('',(0.,0.,-1.)); +#336183 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#336184 = ORIENTED_EDGE('',*,*,#336185,.F.); +#336185 = EDGE_CURVE('',#336186,#336177,#336188,.T.); +#336186 = VERTEX_POINT('',#336187); +#336187 = CARTESIAN_POINT('',(126.725,-158.55,1.51)); +#336188 = LINE('',#336189,#336190); +#336189 = CARTESIAN_POINT('',(126.725,-158.55,1.51)); +#336190 = VECTOR('',#336191,1.); +#336191 = DIRECTION('',(0.,0.,1.)); +#336192 = ORIENTED_EDGE('',*,*,#336193,.F.); +#336193 = EDGE_CURVE('',#336167,#336186,#336194,.T.); +#336194 = CIRCLE('',#336195,0.225000087974); +#336195 = AXIS2_PLACEMENT_3D('',#336196,#336197,#336198); +#336196 = CARTESIAN_POINT('',(126.72500008797,-158.7750000879,1.51)); +#336197 = DIRECTION('',(0.,0.,-1.)); +#336198 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#336199 = CYLINDRICAL_SURFACE('',#336200,0.225000087974); +#336200 = AXIS2_PLACEMENT_3D('',#336201,#336202,#336203); +#336201 = CARTESIAN_POINT('',(126.72500008797,-158.7750000879,1.51)); +#336202 = DIRECTION('',(0.,0.,-1.)); +#336203 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#336204 = ADVANCED_FACE('',(#336205),#336230,.T.); +#336205 = FACE_BOUND('',#336206,.T.); +#336206 = EDGE_LOOP('',(#336207,#336208,#336216,#336224)); +#336207 = ORIENTED_EDGE('',*,*,#336185,.T.); +#336208 = ORIENTED_EDGE('',*,*,#336209,.T.); +#336209 = EDGE_CURVE('',#336177,#336210,#336212,.T.); +#336210 = VERTEX_POINT('',#336211); +#336211 = CARTESIAN_POINT('',(127.575,-158.55,1.55)); +#336212 = LINE('',#336213,#336214); +#336213 = CARTESIAN_POINT('',(126.725,-158.55,1.55)); +#336214 = VECTOR('',#336215,1.); +#336215 = DIRECTION('',(1.,0.,0.)); +#336216 = ORIENTED_EDGE('',*,*,#336217,.F.); +#336217 = EDGE_CURVE('',#336218,#336210,#336220,.T.); +#336218 = VERTEX_POINT('',#336219); +#336219 = CARTESIAN_POINT('',(127.575,-158.55,1.51)); +#336220 = LINE('',#336221,#336222); +#336221 = CARTESIAN_POINT('',(127.575,-158.55,1.51)); +#336222 = VECTOR('',#336223,1.); +#336223 = DIRECTION('',(0.,0.,1.)); +#336224 = ORIENTED_EDGE('',*,*,#336225,.F.); +#336225 = EDGE_CURVE('',#336186,#336218,#336226,.T.); +#336226 = LINE('',#336227,#336228); +#336227 = CARTESIAN_POINT('',(126.725,-158.55,1.51)); +#336228 = VECTOR('',#336229,1.); +#336229 = DIRECTION('',(1.,0.,0.)); +#336230 = PLANE('',#336231); +#336231 = AXIS2_PLACEMENT_3D('',#336232,#336233,#336234); +#336232 = CARTESIAN_POINT('',(126.725,-158.55,1.51)); +#336233 = DIRECTION('',(0.,1.,0.)); +#336234 = DIRECTION('',(1.,0.,0.)); +#336235 = ADVANCED_FACE('',(#336236),#336263,.T.); +#336236 = FACE_BOUND('',#336237,.T.); +#336237 = EDGE_LOOP('',(#336238,#336239,#336248,#336256)); +#336238 = ORIENTED_EDGE('',*,*,#336217,.T.); +#336239 = ORIENTED_EDGE('',*,*,#336240,.T.); +#336240 = EDGE_CURVE('',#336210,#336241,#336243,.T.); +#336241 = VERTEX_POINT('',#336242); +#336242 = CARTESIAN_POINT('',(127.8,-158.775,1.55)); +#336243 = CIRCLE('',#336244,0.225000087974); +#336244 = AXIS2_PLACEMENT_3D('',#336245,#336246,#336247); +#336245 = CARTESIAN_POINT('',(127.57499991202,-158.7750000879,1.55)); +#336246 = DIRECTION('',(0.,0.,-1.)); +#336247 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336248 = ORIENTED_EDGE('',*,*,#336249,.F.); +#336249 = EDGE_CURVE('',#336250,#336241,#336252,.T.); +#336250 = VERTEX_POINT('',#336251); +#336251 = CARTESIAN_POINT('',(127.8,-158.775,1.51)); +#336252 = LINE('',#336253,#336254); +#336253 = CARTESIAN_POINT('',(127.8,-158.775,1.51)); +#336254 = VECTOR('',#336255,1.); +#336255 = DIRECTION('',(0.,0.,1.)); +#336256 = ORIENTED_EDGE('',*,*,#336257,.F.); +#336257 = EDGE_CURVE('',#336218,#336250,#336258,.T.); +#336258 = CIRCLE('',#336259,0.225000087974); +#336259 = AXIS2_PLACEMENT_3D('',#336260,#336261,#336262); +#336260 = CARTESIAN_POINT('',(127.57499991202,-158.7750000879,1.51)); +#336261 = DIRECTION('',(0.,0.,-1.)); +#336262 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336263 = CYLINDRICAL_SURFACE('',#336264,0.225000087974); +#336264 = AXIS2_PLACEMENT_3D('',#336265,#336266,#336267); +#336265 = CARTESIAN_POINT('',(127.57499991202,-158.7750000879,1.51)); +#336266 = DIRECTION('',(0.,0.,-1.)); +#336267 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336268 = ADVANCED_FACE('',(#336269),#336294,.T.); +#336269 = FACE_BOUND('',#336270,.T.); +#336270 = EDGE_LOOP('',(#336271,#336272,#336280,#336288)); +#336271 = ORIENTED_EDGE('',*,*,#336249,.T.); +#336272 = ORIENTED_EDGE('',*,*,#336273,.T.); +#336273 = EDGE_CURVE('',#336241,#336274,#336276,.T.); +#336274 = VERTEX_POINT('',#336275); +#336275 = CARTESIAN_POINT('',(127.8,-159.225,1.55)); +#336276 = LINE('',#336277,#336278); +#336277 = CARTESIAN_POINT('',(127.8,-158.775,1.55)); +#336278 = VECTOR('',#336279,1.); +#336279 = DIRECTION('',(0.,-1.,0.)); +#336280 = ORIENTED_EDGE('',*,*,#336281,.F.); +#336281 = EDGE_CURVE('',#336282,#336274,#336284,.T.); +#336282 = VERTEX_POINT('',#336283); +#336283 = CARTESIAN_POINT('',(127.8,-159.225,1.51)); +#336284 = LINE('',#336285,#336286); +#336285 = CARTESIAN_POINT('',(127.8,-159.225,1.51)); +#336286 = VECTOR('',#336287,1.); +#336287 = DIRECTION('',(0.,0.,1.)); +#336288 = ORIENTED_EDGE('',*,*,#336289,.F.); +#336289 = EDGE_CURVE('',#336250,#336282,#336290,.T.); +#336290 = LINE('',#336291,#336292); +#336291 = CARTESIAN_POINT('',(127.8,-158.775,1.51)); +#336292 = VECTOR('',#336293,1.); +#336293 = DIRECTION('',(0.,-1.,0.)); +#336294 = PLANE('',#336295); +#336295 = AXIS2_PLACEMENT_3D('',#336296,#336297,#336298); +#336296 = CARTESIAN_POINT('',(127.8,-158.775,1.51)); +#336297 = DIRECTION('',(1.,0.,-0.)); +#336298 = DIRECTION('',(0.,-1.,0.)); +#336299 = ADVANCED_FACE('',(#336300),#336327,.T.); +#336300 = FACE_BOUND('',#336301,.T.); +#336301 = EDGE_LOOP('',(#336302,#336303,#336312,#336320)); +#336302 = ORIENTED_EDGE('',*,*,#336281,.T.); +#336303 = ORIENTED_EDGE('',*,*,#336304,.T.); +#336304 = EDGE_CURVE('',#336274,#336305,#336307,.T.); +#336305 = VERTEX_POINT('',#336306); +#336306 = CARTESIAN_POINT('',(127.575,-159.45,1.55)); +#336307 = CIRCLE('',#336308,0.225000087974); +#336308 = AXIS2_PLACEMENT_3D('',#336309,#336310,#336311); +#336309 = CARTESIAN_POINT('',(127.57499991202,-159.224999912,1.55)); +#336310 = DIRECTION('',(0.,0.,-1.)); +#336311 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336312 = ORIENTED_EDGE('',*,*,#336313,.F.); +#336313 = EDGE_CURVE('',#336314,#336305,#336316,.T.); +#336314 = VERTEX_POINT('',#336315); +#336315 = CARTESIAN_POINT('',(127.575,-159.45,1.51)); +#336316 = LINE('',#336317,#336318); +#336317 = CARTESIAN_POINT('',(127.575,-159.45,1.51)); +#336318 = VECTOR('',#336319,1.); +#336319 = DIRECTION('',(0.,0.,1.)); +#336320 = ORIENTED_EDGE('',*,*,#336321,.F.); +#336321 = EDGE_CURVE('',#336282,#336314,#336322,.T.); +#336322 = CIRCLE('',#336323,0.225000087974); +#336323 = AXIS2_PLACEMENT_3D('',#336324,#336325,#336326); +#336324 = CARTESIAN_POINT('',(127.57499991202,-159.224999912,1.51)); +#336325 = DIRECTION('',(0.,0.,-1.)); +#336326 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336327 = CYLINDRICAL_SURFACE('',#336328,0.225000087974); +#336328 = AXIS2_PLACEMENT_3D('',#336329,#336330,#336331); +#336329 = CARTESIAN_POINT('',(127.57499991202,-159.224999912,1.51)); +#336330 = DIRECTION('',(0.,0.,-1.)); +#336331 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336332 = ADVANCED_FACE('',(#336333),#336358,.T.); +#336333 = FACE_BOUND('',#336334,.T.); +#336334 = EDGE_LOOP('',(#336335,#336336,#336344,#336352)); +#336335 = ORIENTED_EDGE('',*,*,#336313,.T.); +#336336 = ORIENTED_EDGE('',*,*,#336337,.T.); +#336337 = EDGE_CURVE('',#336305,#336338,#336340,.T.); +#336338 = VERTEX_POINT('',#336339); +#336339 = CARTESIAN_POINT('',(126.725,-159.45,1.55)); +#336340 = LINE('',#336341,#336342); +#336341 = CARTESIAN_POINT('',(127.575,-159.45,1.55)); +#336342 = VECTOR('',#336343,1.); +#336343 = DIRECTION('',(-1.,0.,0.)); +#336344 = ORIENTED_EDGE('',*,*,#336345,.F.); +#336345 = EDGE_CURVE('',#336346,#336338,#336348,.T.); +#336346 = VERTEX_POINT('',#336347); +#336347 = CARTESIAN_POINT('',(126.725,-159.45,1.51)); +#336348 = LINE('',#336349,#336350); +#336349 = CARTESIAN_POINT('',(126.725,-159.45,1.51)); +#336350 = VECTOR('',#336351,1.); +#336351 = DIRECTION('',(0.,0.,1.)); +#336352 = ORIENTED_EDGE('',*,*,#336353,.F.); +#336353 = EDGE_CURVE('',#336314,#336346,#336354,.T.); +#336354 = LINE('',#336355,#336356); +#336355 = CARTESIAN_POINT('',(127.575,-159.45,1.51)); +#336356 = VECTOR('',#336357,1.); +#336357 = DIRECTION('',(-1.,0.,0.)); +#336358 = PLANE('',#336359); +#336359 = AXIS2_PLACEMENT_3D('',#336360,#336361,#336362); +#336360 = CARTESIAN_POINT('',(127.575,-159.45,1.51)); +#336361 = DIRECTION('',(0.,-1.,0.)); +#336362 = DIRECTION('',(-1.,0.,0.)); +#336363 = ADVANCED_FACE('',(#336364),#336391,.T.); +#336364 = FACE_BOUND('',#336365,.T.); +#336365 = EDGE_LOOP('',(#336366,#336367,#336376,#336384)); +#336366 = ORIENTED_EDGE('',*,*,#336345,.T.); +#336367 = ORIENTED_EDGE('',*,*,#336368,.T.); +#336368 = EDGE_CURVE('',#336338,#336369,#336371,.T.); +#336369 = VERTEX_POINT('',#336370); +#336370 = CARTESIAN_POINT('',(126.5,-159.225,1.55)); +#336371 = CIRCLE('',#336372,0.225000087974); +#336372 = AXIS2_PLACEMENT_3D('',#336373,#336374,#336375); +#336373 = CARTESIAN_POINT('',(126.72500008797,-159.224999912,1.55)); +#336374 = DIRECTION('',(0.,0.,-1.)); +#336375 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336376 = ORIENTED_EDGE('',*,*,#336377,.F.); +#336377 = EDGE_CURVE('',#336378,#336369,#336380,.T.); +#336378 = VERTEX_POINT('',#336379); +#336379 = CARTESIAN_POINT('',(126.5,-159.225,1.51)); +#336380 = LINE('',#336381,#336382); +#336381 = CARTESIAN_POINT('',(126.5,-159.225,1.51)); +#336382 = VECTOR('',#336383,1.); +#336383 = DIRECTION('',(0.,0.,1.)); +#336384 = ORIENTED_EDGE('',*,*,#336385,.F.); +#336385 = EDGE_CURVE('',#336346,#336378,#336386,.T.); +#336386 = CIRCLE('',#336387,0.225000087974); +#336387 = AXIS2_PLACEMENT_3D('',#336388,#336389,#336390); +#336388 = CARTESIAN_POINT('',(126.72500008797,-159.224999912,1.51)); +#336389 = DIRECTION('',(0.,0.,-1.)); +#336390 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336391 = CYLINDRICAL_SURFACE('',#336392,0.225000087974); +#336392 = AXIS2_PLACEMENT_3D('',#336393,#336394,#336395); +#336393 = CARTESIAN_POINT('',(126.72500008797,-159.224999912,1.51)); +#336394 = DIRECTION('',(0.,0.,-1.)); +#336395 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#336396 = ADVANCED_FACE('',(#336397),#336413,.T.); +#336397 = FACE_BOUND('',#336398,.T.); +#336398 = EDGE_LOOP('',(#336399,#336400,#336406,#336407)); +#336399 = ORIENTED_EDGE('',*,*,#336377,.T.); +#336400 = ORIENTED_EDGE('',*,*,#336401,.T.); +#336401 = EDGE_CURVE('',#336369,#336169,#336402,.T.); +#336402 = LINE('',#336403,#336404); +#336403 = CARTESIAN_POINT('',(126.5,-159.225,1.55)); +#336404 = VECTOR('',#336405,1.); +#336405 = DIRECTION('',(0.,1.,0.)); +#336406 = ORIENTED_EDGE('',*,*,#336166,.F.); +#336407 = ORIENTED_EDGE('',*,*,#336408,.F.); +#336408 = EDGE_CURVE('',#336378,#336167,#336409,.T.); +#336409 = LINE('',#336410,#336411); +#336410 = CARTESIAN_POINT('',(126.5,-159.225,1.51)); +#336411 = VECTOR('',#336412,1.); +#336412 = DIRECTION('',(0.,1.,0.)); +#336413 = PLANE('',#336414); +#336414 = AXIS2_PLACEMENT_3D('',#336415,#336416,#336417); +#336415 = CARTESIAN_POINT('',(126.5,-159.225,1.51)); +#336416 = DIRECTION('',(-1.,0.,0.)); +#336417 = DIRECTION('',(0.,1.,0.)); +#336418 = ADVANCED_FACE('',(#336419),#336429,.F.); +#336419 = FACE_BOUND('',#336420,.T.); +#336420 = EDGE_LOOP('',(#336421,#336422,#336423,#336424,#336425,#336426, + #336427,#336428)); +#336421 = ORIENTED_EDGE('',*,*,#336193,.T.); +#336422 = ORIENTED_EDGE('',*,*,#336225,.T.); +#336423 = ORIENTED_EDGE('',*,*,#336257,.T.); +#336424 = ORIENTED_EDGE('',*,*,#336289,.T.); +#336425 = ORIENTED_EDGE('',*,*,#336321,.T.); +#336426 = ORIENTED_EDGE('',*,*,#336353,.T.); +#336427 = ORIENTED_EDGE('',*,*,#336385,.T.); +#336428 = ORIENTED_EDGE('',*,*,#336408,.T.); +#336429 = PLANE('',#336430); +#336430 = AXIS2_PLACEMENT_3D('',#336431,#336432,#336433); +#336431 = CARTESIAN_POINT('',(0.,0.,1.51)); +#336432 = DIRECTION('',(0.,0.,1.)); +#336433 = DIRECTION('',(1.,0.,-0.)); +#336434 = ADVANCED_FACE('',(#336435),#336445,.T.); +#336435 = FACE_BOUND('',#336436,.F.); +#336436 = EDGE_LOOP('',(#336437,#336438,#336439,#336440,#336441,#336442, + #336443,#336444)); +#336437 = ORIENTED_EDGE('',*,*,#336176,.T.); +#336438 = ORIENTED_EDGE('',*,*,#336209,.T.); +#336439 = ORIENTED_EDGE('',*,*,#336240,.T.); +#336440 = ORIENTED_EDGE('',*,*,#336273,.T.); +#336441 = ORIENTED_EDGE('',*,*,#336304,.T.); +#336442 = ORIENTED_EDGE('',*,*,#336337,.T.); +#336443 = ORIENTED_EDGE('',*,*,#336368,.T.); +#336444 = ORIENTED_EDGE('',*,*,#336401,.T.); +#336445 = PLANE('',#336446); +#336446 = AXIS2_PLACEMENT_3D('',#336447,#336448,#336449); +#336447 = CARTESIAN_POINT('',(0.,0.,1.55)); +#336448 = DIRECTION('',(0.,0.,1.)); +#336449 = DIRECTION('',(1.,0.,-0.)); +#336450 = MANIFOLD_SOLID_BREP('',#336451); +#336451 = CLOSED_SHELL('',(#336452,#336494,#336525,#336558,#336589, + #336622,#336653,#336686,#336708,#336724)); +#336452 = ADVANCED_FACE('',(#336453),#336489,.T.); +#336453 = FACE_BOUND('',#336454,.T.); +#336454 = EDGE_LOOP('',(#336455,#336465,#336474,#336482)); +#336455 = ORIENTED_EDGE('',*,*,#336456,.T.); +#336456 = EDGE_CURVE('',#336457,#336459,#336461,.T.); +#336457 = VERTEX_POINT('',#336458); +#336458 = CARTESIAN_POINT('',(130.2,-158.775,1.51)); +#336459 = VERTEX_POINT('',#336460); +#336460 = CARTESIAN_POINT('',(130.2,-158.775,1.55)); +#336461 = LINE('',#336462,#336463); +#336462 = CARTESIAN_POINT('',(130.2,-158.775,1.51)); +#336463 = VECTOR('',#336464,1.); +#336464 = DIRECTION('',(0.,0.,1.)); +#336465 = ORIENTED_EDGE('',*,*,#336466,.T.); +#336466 = EDGE_CURVE('',#336459,#336467,#336469,.T.); +#336467 = VERTEX_POINT('',#336468); +#336468 = CARTESIAN_POINT('',(130.425,-158.55,1.55)); +#336469 = CIRCLE('',#336470,0.225000087974); +#336470 = AXIS2_PLACEMENT_3D('',#336471,#336472,#336473); +#336471 = CARTESIAN_POINT('',(130.42500008797,-158.7750000879,1.55)); +#336472 = DIRECTION('',(0.,0.,-1.)); +#336473 = DIRECTION('',(-1.,3.909955352946E-07,0.)); +#336474 = ORIENTED_EDGE('',*,*,#336475,.F.); +#336475 = EDGE_CURVE('',#336476,#336467,#336478,.T.); +#336476 = VERTEX_POINT('',#336477); +#336477 = CARTESIAN_POINT('',(130.425,-158.55,1.51)); +#336478 = LINE('',#336479,#336480); +#336479 = CARTESIAN_POINT('',(130.425,-158.55,1.51)); +#336480 = VECTOR('',#336481,1.); +#336481 = DIRECTION('',(0.,0.,1.)); +#336482 = ORIENTED_EDGE('',*,*,#336483,.F.); +#336483 = EDGE_CURVE('',#336457,#336476,#336484,.T.); +#336484 = CIRCLE('',#336485,0.225000087974); +#336485 = AXIS2_PLACEMENT_3D('',#336486,#336487,#336488); +#336486 = CARTESIAN_POINT('',(130.42500008797,-158.7750000879,1.51)); +#336487 = DIRECTION('',(0.,0.,-1.)); +#336488 = DIRECTION('',(-1.,3.909955352946E-07,0.)); +#336489 = CYLINDRICAL_SURFACE('',#336490,0.225000087974); +#336490 = AXIS2_PLACEMENT_3D('',#336491,#336492,#336493); +#336491 = CARTESIAN_POINT('',(130.42500008797,-158.7750000879,1.51)); +#336492 = DIRECTION('',(0.,0.,-1.)); +#336493 = DIRECTION('',(-1.,3.909955352946E-07,0.)); +#336494 = ADVANCED_FACE('',(#336495),#336520,.T.); +#336495 = FACE_BOUND('',#336496,.T.); +#336496 = EDGE_LOOP('',(#336497,#336498,#336506,#336514)); +#336497 = ORIENTED_EDGE('',*,*,#336475,.T.); +#336498 = ORIENTED_EDGE('',*,*,#336499,.T.); +#336499 = EDGE_CURVE('',#336467,#336500,#336502,.T.); +#336500 = VERTEX_POINT('',#336501); +#336501 = CARTESIAN_POINT('',(131.275,-158.55,1.55)); +#336502 = LINE('',#336503,#336504); +#336503 = CARTESIAN_POINT('',(130.425,-158.55,1.55)); +#336504 = VECTOR('',#336505,1.); +#336505 = DIRECTION('',(1.,0.,0.)); +#336506 = ORIENTED_EDGE('',*,*,#336507,.F.); +#336507 = EDGE_CURVE('',#336508,#336500,#336510,.T.); +#336508 = VERTEX_POINT('',#336509); +#336509 = CARTESIAN_POINT('',(131.275,-158.55,1.51)); +#336510 = LINE('',#336511,#336512); +#336511 = CARTESIAN_POINT('',(131.275,-158.55,1.51)); +#336512 = VECTOR('',#336513,1.); +#336513 = DIRECTION('',(0.,0.,1.)); +#336514 = ORIENTED_EDGE('',*,*,#336515,.F.); +#336515 = EDGE_CURVE('',#336476,#336508,#336516,.T.); +#336516 = LINE('',#336517,#336518); +#336517 = CARTESIAN_POINT('',(130.425,-158.55,1.51)); +#336518 = VECTOR('',#336519,1.); +#336519 = DIRECTION('',(1.,0.,0.)); +#336520 = PLANE('',#336521); +#336521 = AXIS2_PLACEMENT_3D('',#336522,#336523,#336524); +#336522 = CARTESIAN_POINT('',(130.425,-158.55,1.51)); +#336523 = DIRECTION('',(0.,1.,0.)); +#336524 = DIRECTION('',(1.,0.,0.)); +#336525 = ADVANCED_FACE('',(#336526),#336553,.T.); +#336526 = FACE_BOUND('',#336527,.T.); +#336527 = EDGE_LOOP('',(#336528,#336529,#336538,#336546)); +#336528 = ORIENTED_EDGE('',*,*,#336507,.T.); +#336529 = ORIENTED_EDGE('',*,*,#336530,.T.); +#336530 = EDGE_CURVE('',#336500,#336531,#336533,.T.); +#336531 = VERTEX_POINT('',#336532); +#336532 = CARTESIAN_POINT('',(131.5,-158.775,1.55)); +#336533 = CIRCLE('',#336534,0.225000087974); +#336534 = AXIS2_PLACEMENT_3D('',#336535,#336536,#336537); +#336535 = CARTESIAN_POINT('',(131.27499991202,-158.7750000879,1.55)); +#336536 = DIRECTION('',(0.,0.,-1.)); +#336537 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336538 = ORIENTED_EDGE('',*,*,#336539,.F.); +#336539 = EDGE_CURVE('',#336540,#336531,#336542,.T.); +#336540 = VERTEX_POINT('',#336541); +#336541 = CARTESIAN_POINT('',(131.5,-158.775,1.51)); +#336542 = LINE('',#336543,#336544); +#336543 = CARTESIAN_POINT('',(131.5,-158.775,1.51)); +#336544 = VECTOR('',#336545,1.); +#336545 = DIRECTION('',(0.,0.,1.)); +#336546 = ORIENTED_EDGE('',*,*,#336547,.F.); +#336547 = EDGE_CURVE('',#336508,#336540,#336548,.T.); +#336548 = CIRCLE('',#336549,0.225000087974); +#336549 = AXIS2_PLACEMENT_3D('',#336550,#336551,#336552); +#336550 = CARTESIAN_POINT('',(131.27499991202,-158.7750000879,1.51)); +#336551 = DIRECTION('',(0.,0.,-1.)); +#336552 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336553 = CYLINDRICAL_SURFACE('',#336554,0.225000087974); +#336554 = AXIS2_PLACEMENT_3D('',#336555,#336556,#336557); +#336555 = CARTESIAN_POINT('',(131.27499991202,-158.7750000879,1.51)); +#336556 = DIRECTION('',(0.,0.,-1.)); +#336557 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#336558 = ADVANCED_FACE('',(#336559),#336584,.T.); +#336559 = FACE_BOUND('',#336560,.T.); +#336560 = EDGE_LOOP('',(#336561,#336562,#336570,#336578)); +#336561 = ORIENTED_EDGE('',*,*,#336539,.T.); +#336562 = ORIENTED_EDGE('',*,*,#336563,.T.); +#336563 = EDGE_CURVE('',#336531,#336564,#336566,.T.); +#336564 = VERTEX_POINT('',#336565); +#336565 = CARTESIAN_POINT('',(131.5,-159.225,1.55)); +#336566 = LINE('',#336567,#336568); +#336567 = CARTESIAN_POINT('',(131.5,-158.775,1.55)); +#336568 = VECTOR('',#336569,1.); +#336569 = DIRECTION('',(0.,-1.,0.)); +#336570 = ORIENTED_EDGE('',*,*,#336571,.F.); +#336571 = EDGE_CURVE('',#336572,#336564,#336574,.T.); +#336572 = VERTEX_POINT('',#336573); +#336573 = CARTESIAN_POINT('',(131.5,-159.225,1.51)); +#336574 = LINE('',#336575,#336576); +#336575 = CARTESIAN_POINT('',(131.5,-159.225,1.51)); +#336576 = VECTOR('',#336577,1.); +#336577 = DIRECTION('',(0.,0.,1.)); +#336578 = ORIENTED_EDGE('',*,*,#336579,.F.); +#336579 = EDGE_CURVE('',#336540,#336572,#336580,.T.); +#336580 = LINE('',#336581,#336582); +#336581 = CARTESIAN_POINT('',(131.5,-158.775,1.51)); +#336582 = VECTOR('',#336583,1.); +#336583 = DIRECTION('',(0.,-1.,0.)); +#336584 = PLANE('',#336585); +#336585 = AXIS2_PLACEMENT_3D('',#336586,#336587,#336588); +#336586 = CARTESIAN_POINT('',(131.5,-158.775,1.51)); +#336587 = DIRECTION('',(1.,0.,-0.)); +#336588 = DIRECTION('',(0.,-1.,0.)); +#336589 = ADVANCED_FACE('',(#336590),#336617,.T.); +#336590 = FACE_BOUND('',#336591,.T.); +#336591 = EDGE_LOOP('',(#336592,#336593,#336602,#336610)); +#336592 = ORIENTED_EDGE('',*,*,#336571,.T.); +#336593 = ORIENTED_EDGE('',*,*,#336594,.T.); +#336594 = EDGE_CURVE('',#336564,#336595,#336597,.T.); +#336595 = VERTEX_POINT('',#336596); +#336596 = CARTESIAN_POINT('',(131.275,-159.45,1.55)); +#336597 = CIRCLE('',#336598,0.225000087974); +#336598 = AXIS2_PLACEMENT_3D('',#336599,#336600,#336601); +#336599 = CARTESIAN_POINT('',(131.27499991202,-159.224999912,1.55)); +#336600 = DIRECTION('',(0.,0.,-1.)); +#336601 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336602 = ORIENTED_EDGE('',*,*,#336603,.F.); +#336603 = EDGE_CURVE('',#336604,#336595,#336606,.T.); +#336604 = VERTEX_POINT('',#336605); +#336605 = CARTESIAN_POINT('',(131.275,-159.45,1.51)); +#336606 = LINE('',#336607,#336608); +#336607 = CARTESIAN_POINT('',(131.275,-159.45,1.51)); +#336608 = VECTOR('',#336609,1.); +#336609 = DIRECTION('',(0.,0.,1.)); +#336610 = ORIENTED_EDGE('',*,*,#336611,.F.); +#336611 = EDGE_CURVE('',#336572,#336604,#336612,.T.); +#336612 = CIRCLE('',#336613,0.225000087974); +#336613 = AXIS2_PLACEMENT_3D('',#336614,#336615,#336616); +#336614 = CARTESIAN_POINT('',(131.27499991202,-159.224999912,1.51)); +#336615 = DIRECTION('',(0.,0.,-1.)); +#336616 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336617 = CYLINDRICAL_SURFACE('',#336618,0.225000087974); +#336618 = AXIS2_PLACEMENT_3D('',#336619,#336620,#336621); +#336619 = CARTESIAN_POINT('',(131.27499991202,-159.224999912,1.51)); +#336620 = DIRECTION('',(0.,0.,-1.)); +#336621 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#336622 = ADVANCED_FACE('',(#336623),#336648,.T.); +#336623 = FACE_BOUND('',#336624,.T.); +#336624 = EDGE_LOOP('',(#336625,#336626,#336634,#336642)); +#336625 = ORIENTED_EDGE('',*,*,#336603,.T.); +#336626 = ORIENTED_EDGE('',*,*,#336627,.T.); +#336627 = EDGE_CURVE('',#336595,#336628,#336630,.T.); +#336628 = VERTEX_POINT('',#336629); +#336629 = CARTESIAN_POINT('',(130.425,-159.45,1.55)); +#336630 = LINE('',#336631,#336632); +#336631 = CARTESIAN_POINT('',(131.275,-159.45,1.55)); +#336632 = VECTOR('',#336633,1.); +#336633 = DIRECTION('',(-1.,0.,0.)); +#336634 = ORIENTED_EDGE('',*,*,#336635,.F.); +#336635 = EDGE_CURVE('',#336636,#336628,#336638,.T.); +#336636 = VERTEX_POINT('',#336637); +#336637 = CARTESIAN_POINT('',(130.425,-159.45,1.51)); +#336638 = LINE('',#336639,#336640); +#336639 = CARTESIAN_POINT('',(130.425,-159.45,1.51)); +#336640 = VECTOR('',#336641,1.); +#336641 = DIRECTION('',(0.,0.,1.)); +#336642 = ORIENTED_EDGE('',*,*,#336643,.F.); +#336643 = EDGE_CURVE('',#336604,#336636,#336644,.T.); +#336644 = LINE('',#336645,#336646); +#336645 = CARTESIAN_POINT('',(131.275,-159.45,1.51)); +#336646 = VECTOR('',#336647,1.); +#336647 = DIRECTION('',(-1.,0.,0.)); +#336648 = PLANE('',#336649); +#336649 = AXIS2_PLACEMENT_3D('',#336650,#336651,#336652); +#336650 = CARTESIAN_POINT('',(131.275,-159.45,1.51)); +#336651 = DIRECTION('',(0.,-1.,0.)); +#336652 = DIRECTION('',(-1.,0.,0.)); +#336653 = ADVANCED_FACE('',(#336654),#336681,.T.); +#336654 = FACE_BOUND('',#336655,.T.); +#336655 = EDGE_LOOP('',(#336656,#336657,#336666,#336674)); +#336656 = ORIENTED_EDGE('',*,*,#336635,.T.); +#336657 = ORIENTED_EDGE('',*,*,#336658,.T.); +#336658 = EDGE_CURVE('',#336628,#336659,#336661,.T.); +#336659 = VERTEX_POINT('',#336660); +#336660 = CARTESIAN_POINT('',(130.2,-159.225,1.55)); +#336661 = CIRCLE('',#336662,0.225000087974); +#336662 = AXIS2_PLACEMENT_3D('',#336663,#336664,#336665); +#336663 = CARTESIAN_POINT('',(130.42500008797,-159.224999912,1.55)); +#336664 = DIRECTION('',(0.,0.,-1.)); +#336665 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#336666 = ORIENTED_EDGE('',*,*,#336667,.F.); +#336667 = EDGE_CURVE('',#336668,#336659,#336670,.T.); +#336668 = VERTEX_POINT('',#336669); +#336669 = CARTESIAN_POINT('',(130.2,-159.225,1.51)); +#336670 = LINE('',#336671,#336672); +#336671 = CARTESIAN_POINT('',(130.2,-159.225,1.51)); +#336672 = VECTOR('',#336673,1.); +#336673 = DIRECTION('',(0.,0.,1.)); +#336674 = ORIENTED_EDGE('',*,*,#336675,.F.); +#336675 = EDGE_CURVE('',#336636,#336668,#336676,.T.); +#336676 = CIRCLE('',#336677,0.225000087974); +#336677 = AXIS2_PLACEMENT_3D('',#336678,#336679,#336680); +#336678 = CARTESIAN_POINT('',(130.42500008797,-159.224999912,1.51)); +#336679 = DIRECTION('',(0.,0.,-1.)); +#336680 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#336681 = CYLINDRICAL_SURFACE('',#336682,0.225000087974); +#336682 = AXIS2_PLACEMENT_3D('',#336683,#336684,#336685); +#336683 = CARTESIAN_POINT('',(130.42500008797,-159.224999912,1.51)); +#336684 = DIRECTION('',(0.,0.,-1.)); +#336685 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#336686 = ADVANCED_FACE('',(#336687),#336703,.T.); +#336687 = FACE_BOUND('',#336688,.T.); +#336688 = EDGE_LOOP('',(#336689,#336690,#336696,#336697)); +#336689 = ORIENTED_EDGE('',*,*,#336667,.T.); +#336690 = ORIENTED_EDGE('',*,*,#336691,.T.); +#336691 = EDGE_CURVE('',#336659,#336459,#336692,.T.); +#336692 = LINE('',#336693,#336694); +#336693 = CARTESIAN_POINT('',(130.2,-159.225,1.55)); +#336694 = VECTOR('',#336695,1.); +#336695 = DIRECTION('',(0.,1.,0.)); +#336696 = ORIENTED_EDGE('',*,*,#336456,.F.); +#336697 = ORIENTED_EDGE('',*,*,#336698,.F.); +#336698 = EDGE_CURVE('',#336668,#336457,#336699,.T.); +#336699 = LINE('',#336700,#336701); +#336700 = CARTESIAN_POINT('',(130.2,-159.225,1.51)); +#336701 = VECTOR('',#336702,1.); +#336702 = DIRECTION('',(0.,1.,0.)); +#336703 = PLANE('',#336704); +#336704 = AXIS2_PLACEMENT_3D('',#336705,#336706,#336707); +#336705 = CARTESIAN_POINT('',(130.2,-159.225,1.51)); +#336706 = DIRECTION('',(-1.,0.,0.)); +#336707 = DIRECTION('',(0.,1.,0.)); +#336708 = ADVANCED_FACE('',(#336709),#336719,.F.); +#336709 = FACE_BOUND('',#336710,.T.); +#336710 = EDGE_LOOP('',(#336711,#336712,#336713,#336714,#336715,#336716, + #336717,#336718)); +#336711 = ORIENTED_EDGE('',*,*,#336483,.T.); +#336712 = ORIENTED_EDGE('',*,*,#336515,.T.); +#336713 = ORIENTED_EDGE('',*,*,#336547,.T.); +#336714 = ORIENTED_EDGE('',*,*,#336579,.T.); +#336715 = ORIENTED_EDGE('',*,*,#336611,.T.); +#336716 = ORIENTED_EDGE('',*,*,#336643,.T.); +#336717 = ORIENTED_EDGE('',*,*,#336675,.T.); +#336718 = ORIENTED_EDGE('',*,*,#336698,.T.); +#336719 = PLANE('',#336720); +#336720 = AXIS2_PLACEMENT_3D('',#336721,#336722,#336723); +#336721 = CARTESIAN_POINT('',(0.,0.,1.51)); +#336722 = DIRECTION('',(0.,0.,1.)); +#336723 = DIRECTION('',(1.,0.,-0.)); +#336724 = ADVANCED_FACE('',(#336725),#336735,.T.); +#336725 = FACE_BOUND('',#336726,.F.); +#336726 = EDGE_LOOP('',(#336727,#336728,#336729,#336730,#336731,#336732, + #336733,#336734)); +#336727 = ORIENTED_EDGE('',*,*,#336466,.T.); +#336728 = ORIENTED_EDGE('',*,*,#336499,.T.); +#336729 = ORIENTED_EDGE('',*,*,#336530,.T.); +#336730 = ORIENTED_EDGE('',*,*,#336563,.T.); +#336731 = ORIENTED_EDGE('',*,*,#336594,.T.); +#336732 = ORIENTED_EDGE('',*,*,#336627,.T.); +#336733 = ORIENTED_EDGE('',*,*,#336658,.T.); +#336734 = ORIENTED_EDGE('',*,*,#336691,.T.); +#336735 = PLANE('',#336736); +#336736 = AXIS2_PLACEMENT_3D('',#336737,#336738,#336739); +#336737 = CARTESIAN_POINT('',(0.,0.,1.55)); +#336738 = DIRECTION('',(0.,0.,1.)); +#336739 = DIRECTION('',(1.,0.,-0.)); +#336740 = MANIFOLD_SOLID_BREP('',#336741); +#336741 = CLOSED_SHELL('',(#336742,#336784,#336815,#336848,#336879, + #336912,#336943,#336976,#336998,#337014)); +#336742 = ADVANCED_FACE('',(#336743),#336779,.T.); +#336743 = FACE_BOUND('',#336744,.F.); +#336744 = EDGE_LOOP('',(#336745,#336755,#336764,#336772)); +#336745 = ORIENTED_EDGE('',*,*,#336746,.T.); +#336746 = EDGE_CURVE('',#336747,#336749,#336751,.T.); +#336747 = VERTEX_POINT('',#336748); +#336748 = CARTESIAN_POINT('',(147.525,-130.325,0.)); +#336749 = VERTEX_POINT('',#336750); +#336750 = CARTESIAN_POINT('',(147.525,-130.325,-4.E-02)); +#336751 = LINE('',#336752,#336753); +#336752 = CARTESIAN_POINT('',(147.525,-130.325,0.)); +#336753 = VECTOR('',#336754,1.); +#336754 = DIRECTION('',(0.,0.,-1.)); +#336755 = ORIENTED_EDGE('',*,*,#336756,.T.); +#336756 = EDGE_CURVE('',#336749,#336757,#336759,.T.); +#336757 = VERTEX_POINT('',#336758); +#336758 = CARTESIAN_POINT('',(147.6375,-130.2125,-4.E-02)); +#336759 = CIRCLE('',#336760,0.112498336922); +#336760 = AXIS2_PLACEMENT_3D('',#336761,#336762,#336763); +#336761 = CARTESIAN_POINT('',(147.63749833691,-130.3249983369,-4.E-02)); +#336762 = DIRECTION('',(0.,0.,-1.)); +#336763 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#336764 = ORIENTED_EDGE('',*,*,#336765,.F.); +#336765 = EDGE_CURVE('',#336766,#336757,#336768,.T.); +#336766 = VERTEX_POINT('',#336767); +#336767 = CARTESIAN_POINT('',(147.6375,-130.2125,0.)); +#336768 = LINE('',#336769,#336770); +#336769 = CARTESIAN_POINT('',(147.6375,-130.2125,0.)); +#336770 = VECTOR('',#336771,1.); +#336771 = DIRECTION('',(0.,0.,-1.)); +#336772 = ORIENTED_EDGE('',*,*,#336773,.F.); +#336773 = EDGE_CURVE('',#336747,#336766,#336774,.T.); +#336774 = CIRCLE('',#336775,0.112498336922); +#336775 = AXIS2_PLACEMENT_3D('',#336776,#336777,#336778); +#336776 = CARTESIAN_POINT('',(147.63749833691,-130.3249983369,0.)); +#336777 = DIRECTION('',(0.,0.,-1.)); +#336778 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#336779 = CYLINDRICAL_SURFACE('',#336780,0.112498336922); +#336780 = AXIS2_PLACEMENT_3D('',#336781,#336782,#336783); +#336781 = CARTESIAN_POINT('',(147.63749833691,-130.3249983369,0.)); +#336782 = DIRECTION('',(-0.,-0.,1.)); +#336783 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#336784 = ADVANCED_FACE('',(#336785),#336810,.F.); +#336785 = FACE_BOUND('',#336786,.F.); +#336786 = EDGE_LOOP('',(#336787,#336788,#336796,#336804)); +#336787 = ORIENTED_EDGE('',*,*,#336765,.T.); +#336788 = ORIENTED_EDGE('',*,*,#336789,.T.); +#336789 = EDGE_CURVE('',#336757,#336790,#336792,.T.); +#336790 = VERTEX_POINT('',#336791); +#336791 = CARTESIAN_POINT('',(147.8625,-130.2125,-4.E-02)); +#336792 = LINE('',#336793,#336794); +#336793 = CARTESIAN_POINT('',(147.6375,-130.2125,-4.E-02)); +#336794 = VECTOR('',#336795,1.); +#336795 = DIRECTION('',(1.,0.,0.)); +#336796 = ORIENTED_EDGE('',*,*,#336797,.F.); +#336797 = EDGE_CURVE('',#336798,#336790,#336800,.T.); +#336798 = VERTEX_POINT('',#336799); +#336799 = CARTESIAN_POINT('',(147.8625,-130.2125,0.)); +#336800 = LINE('',#336801,#336802); +#336801 = CARTESIAN_POINT('',(147.8625,-130.2125,0.)); +#336802 = VECTOR('',#336803,1.); +#336803 = DIRECTION('',(0.,0.,-1.)); +#336804 = ORIENTED_EDGE('',*,*,#336805,.F.); +#336805 = EDGE_CURVE('',#336766,#336798,#336806,.T.); +#336806 = LINE('',#336807,#336808); +#336807 = CARTESIAN_POINT('',(147.6375,-130.2125,0.)); +#336808 = VECTOR('',#336809,1.); +#336809 = DIRECTION('',(1.,0.,0.)); +#336810 = PLANE('',#336811); +#336811 = AXIS2_PLACEMENT_3D('',#336812,#336813,#336814); +#336812 = CARTESIAN_POINT('',(147.6375,-130.2125,0.)); +#336813 = DIRECTION('',(0.,-1.,0.)); +#336814 = DIRECTION('',(1.,0.,0.)); +#336815 = ADVANCED_FACE('',(#336816),#336843,.T.); +#336816 = FACE_BOUND('',#336817,.F.); +#336817 = EDGE_LOOP('',(#336818,#336819,#336828,#336836)); +#336818 = ORIENTED_EDGE('',*,*,#336797,.T.); +#336819 = ORIENTED_EDGE('',*,*,#336820,.T.); +#336820 = EDGE_CURVE('',#336790,#336821,#336823,.T.); +#336821 = VERTEX_POINT('',#336822); +#336822 = CARTESIAN_POINT('',(147.975,-130.325,-4.E-02)); +#336823 = CIRCLE('',#336824,0.112498336922); +#336824 = AXIS2_PLACEMENT_3D('',#336825,#336826,#336827); +#336825 = CARTESIAN_POINT('',(147.86250166309,-130.3249983369,-4.E-02)); +#336826 = DIRECTION('',(0.,0.,-1.)); +#336827 = DIRECTION('',(-1.478324167686E-05,0.999999999891,0.)); +#336828 = ORIENTED_EDGE('',*,*,#336829,.F.); +#336829 = EDGE_CURVE('',#336830,#336821,#336832,.T.); +#336830 = VERTEX_POINT('',#336831); +#336831 = CARTESIAN_POINT('',(147.975,-130.325,0.)); +#336832 = LINE('',#336833,#336834); +#336833 = CARTESIAN_POINT('',(147.975,-130.325,0.)); +#336834 = VECTOR('',#336835,1.); +#336835 = DIRECTION('',(0.,0.,-1.)); +#336836 = ORIENTED_EDGE('',*,*,#336837,.F.); +#336837 = EDGE_CURVE('',#336798,#336830,#336838,.T.); +#336838 = CIRCLE('',#336839,0.112498336922); +#336839 = AXIS2_PLACEMENT_3D('',#336840,#336841,#336842); +#336840 = CARTESIAN_POINT('',(147.86250166309,-130.3249983369,0.)); +#336841 = DIRECTION('',(0.,0.,-1.)); +#336842 = DIRECTION('',(-1.478324167686E-05,0.999999999891,0.)); +#336843 = CYLINDRICAL_SURFACE('',#336844,0.112498336922); +#336844 = AXIS2_PLACEMENT_3D('',#336845,#336846,#336847); +#336845 = CARTESIAN_POINT('',(147.86250166309,-130.3249983369,0.)); +#336846 = DIRECTION('',(-0.,-0.,1.)); +#336847 = DIRECTION('',(-1.478324167686E-05,0.999999999891,0.)); +#336848 = ADVANCED_FACE('',(#336849),#336874,.F.); +#336849 = FACE_BOUND('',#336850,.F.); +#336850 = EDGE_LOOP('',(#336851,#336852,#336860,#336868)); +#336851 = ORIENTED_EDGE('',*,*,#336829,.T.); +#336852 = ORIENTED_EDGE('',*,*,#336853,.T.); +#336853 = EDGE_CURVE('',#336821,#336854,#336856,.T.); +#336854 = VERTEX_POINT('',#336855); +#336855 = CARTESIAN_POINT('',(147.975,-131.025,-4.E-02)); +#336856 = LINE('',#336857,#336858); +#336857 = CARTESIAN_POINT('',(147.975,-130.325,-4.E-02)); +#336858 = VECTOR('',#336859,1.); +#336859 = DIRECTION('',(0.,-1.,0.)); +#336860 = ORIENTED_EDGE('',*,*,#336861,.F.); +#336861 = EDGE_CURVE('',#336862,#336854,#336864,.T.); +#336862 = VERTEX_POINT('',#336863); +#336863 = CARTESIAN_POINT('',(147.975,-131.025,0.)); +#336864 = LINE('',#336865,#336866); +#336865 = CARTESIAN_POINT('',(147.975,-131.025,0.)); +#336866 = VECTOR('',#336867,1.); +#336867 = DIRECTION('',(0.,0.,-1.)); +#336868 = ORIENTED_EDGE('',*,*,#336869,.F.); +#336869 = EDGE_CURVE('',#336830,#336862,#336870,.T.); +#336870 = LINE('',#336871,#336872); +#336871 = CARTESIAN_POINT('',(147.975,-130.325,0.)); +#336872 = VECTOR('',#336873,1.); +#336873 = DIRECTION('',(0.,-1.,0.)); +#336874 = PLANE('',#336875); +#336875 = AXIS2_PLACEMENT_3D('',#336876,#336877,#336878); +#336876 = CARTESIAN_POINT('',(147.975,-130.325,0.)); +#336877 = DIRECTION('',(-1.,-0.,-0.)); +#336878 = DIRECTION('',(0.,-1.,0.)); +#336879 = ADVANCED_FACE('',(#336880),#336907,.T.); +#336880 = FACE_BOUND('',#336881,.F.); +#336881 = EDGE_LOOP('',(#336882,#336883,#336892,#336900)); +#336882 = ORIENTED_EDGE('',*,*,#336861,.T.); +#336883 = ORIENTED_EDGE('',*,*,#336884,.T.); +#336884 = EDGE_CURVE('',#336854,#336885,#336887,.T.); +#336885 = VERTEX_POINT('',#336886); +#336886 = CARTESIAN_POINT('',(147.8625,-131.1375,-4.E-02)); +#336887 = CIRCLE('',#336888,0.112498336922); +#336888 = AXIS2_PLACEMENT_3D('',#336889,#336890,#336891); +#336889 = CARTESIAN_POINT('',(147.86250166309,-131.025001663,-4.E-02)); +#336890 = DIRECTION('',(0.,0.,-1.)); +#336891 = DIRECTION('',(0.999999999891,1.478324167687E-05,0.)); +#336892 = ORIENTED_EDGE('',*,*,#336893,.F.); +#336893 = EDGE_CURVE('',#336894,#336885,#336896,.T.); +#336894 = VERTEX_POINT('',#336895); +#336895 = CARTESIAN_POINT('',(147.8625,-131.1375,0.)); +#336896 = LINE('',#336897,#336898); +#336897 = CARTESIAN_POINT('',(147.8625,-131.1375,0.)); +#336898 = VECTOR('',#336899,1.); +#336899 = DIRECTION('',(0.,0.,-1.)); +#336900 = ORIENTED_EDGE('',*,*,#336901,.F.); +#336901 = EDGE_CURVE('',#336862,#336894,#336902,.T.); +#336902 = CIRCLE('',#336903,0.112498336922); +#336903 = AXIS2_PLACEMENT_3D('',#336904,#336905,#336906); +#336904 = CARTESIAN_POINT('',(147.86250166309,-131.025001663,0.)); +#336905 = DIRECTION('',(0.,0.,-1.)); +#336906 = DIRECTION('',(0.999999999891,1.478324167687E-05,0.)); +#336907 = CYLINDRICAL_SURFACE('',#336908,0.112498336922); +#336908 = AXIS2_PLACEMENT_3D('',#336909,#336910,#336911); +#336909 = CARTESIAN_POINT('',(147.86250166309,-131.025001663,0.)); +#336910 = DIRECTION('',(-0.,-0.,1.)); +#336911 = DIRECTION('',(0.999999999891,1.478324167687E-05,0.)); +#336912 = ADVANCED_FACE('',(#336913),#336938,.F.); +#336913 = FACE_BOUND('',#336914,.F.); +#336914 = EDGE_LOOP('',(#336915,#336916,#336924,#336932)); +#336915 = ORIENTED_EDGE('',*,*,#336893,.T.); +#336916 = ORIENTED_EDGE('',*,*,#336917,.T.); +#336917 = EDGE_CURVE('',#336885,#336918,#336920,.T.); +#336918 = VERTEX_POINT('',#336919); +#336919 = CARTESIAN_POINT('',(147.6375,-131.1375,-4.E-02)); +#336920 = LINE('',#336921,#336922); +#336921 = CARTESIAN_POINT('',(147.8625,-131.1375,-4.E-02)); +#336922 = VECTOR('',#336923,1.); +#336923 = DIRECTION('',(-1.,0.,0.)); +#336924 = ORIENTED_EDGE('',*,*,#336925,.F.); +#336925 = EDGE_CURVE('',#336926,#336918,#336928,.T.); +#336926 = VERTEX_POINT('',#336927); +#336927 = CARTESIAN_POINT('',(147.6375,-131.1375,0.)); +#336928 = LINE('',#336929,#336930); +#336929 = CARTESIAN_POINT('',(147.6375,-131.1375,0.)); +#336930 = VECTOR('',#336931,1.); +#336931 = DIRECTION('',(0.,0.,-1.)); +#336932 = ORIENTED_EDGE('',*,*,#336933,.F.); +#336933 = EDGE_CURVE('',#336894,#336926,#336934,.T.); +#336934 = LINE('',#336935,#336936); +#336935 = CARTESIAN_POINT('',(147.8625,-131.1375,0.)); +#336936 = VECTOR('',#336937,1.); +#336937 = DIRECTION('',(-1.,0.,0.)); +#336938 = PLANE('',#336939); +#336939 = AXIS2_PLACEMENT_3D('',#336940,#336941,#336942); +#336940 = CARTESIAN_POINT('',(147.8625,-131.1375,0.)); +#336941 = DIRECTION('',(0.,1.,0.)); +#336942 = DIRECTION('',(-1.,0.,0.)); +#336943 = ADVANCED_FACE('',(#336944),#336971,.T.); +#336944 = FACE_BOUND('',#336945,.F.); +#336945 = EDGE_LOOP('',(#336946,#336947,#336956,#336964)); +#336946 = ORIENTED_EDGE('',*,*,#336925,.T.); +#336947 = ORIENTED_EDGE('',*,*,#336948,.T.); +#336948 = EDGE_CURVE('',#336918,#336949,#336951,.T.); +#336949 = VERTEX_POINT('',#336950); +#336950 = CARTESIAN_POINT('',(147.525,-131.025,-4.E-02)); +#336951 = CIRCLE('',#336952,0.112498336922); +#336952 = AXIS2_PLACEMENT_3D('',#336953,#336954,#336955); +#336953 = CARTESIAN_POINT('',(147.63749833691,-131.025001663,-4.E-02)); +#336954 = DIRECTION('',(0.,0.,-1.)); +#336955 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#336956 = ORIENTED_EDGE('',*,*,#336957,.F.); +#336957 = EDGE_CURVE('',#336958,#336949,#336960,.T.); +#336958 = VERTEX_POINT('',#336959); +#336959 = CARTESIAN_POINT('',(147.525,-131.025,0.)); +#336960 = LINE('',#336961,#336962); +#336961 = CARTESIAN_POINT('',(147.525,-131.025,0.)); +#336962 = VECTOR('',#336963,1.); +#336963 = DIRECTION('',(0.,0.,-1.)); +#336964 = ORIENTED_EDGE('',*,*,#336965,.F.); +#336965 = EDGE_CURVE('',#336926,#336958,#336966,.T.); +#336966 = CIRCLE('',#336967,0.112498336922); +#336967 = AXIS2_PLACEMENT_3D('',#336968,#336969,#336970); +#336968 = CARTESIAN_POINT('',(147.63749833691,-131.025001663,0.)); +#336969 = DIRECTION('',(0.,0.,-1.)); +#336970 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#336971 = CYLINDRICAL_SURFACE('',#336972,0.112498336922); +#336972 = AXIS2_PLACEMENT_3D('',#336973,#336974,#336975); +#336973 = CARTESIAN_POINT('',(147.63749833691,-131.025001663,0.)); +#336974 = DIRECTION('',(-0.,-0.,1.)); +#336975 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#336976 = ADVANCED_FACE('',(#336977),#336993,.F.); +#336977 = FACE_BOUND('',#336978,.F.); +#336978 = EDGE_LOOP('',(#336979,#336980,#336986,#336987)); +#336979 = ORIENTED_EDGE('',*,*,#336957,.T.); +#336980 = ORIENTED_EDGE('',*,*,#336981,.T.); +#336981 = EDGE_CURVE('',#336949,#336749,#336982,.T.); +#336982 = LINE('',#336983,#336984); +#336983 = CARTESIAN_POINT('',(147.525,-131.025,-4.E-02)); +#336984 = VECTOR('',#336985,1.); +#336985 = DIRECTION('',(0.,1.,0.)); +#336986 = ORIENTED_EDGE('',*,*,#336746,.F.); +#336987 = ORIENTED_EDGE('',*,*,#336988,.F.); +#336988 = EDGE_CURVE('',#336958,#336747,#336989,.T.); +#336989 = LINE('',#336990,#336991); +#336990 = CARTESIAN_POINT('',(147.525,-131.025,0.)); +#336991 = VECTOR('',#336992,1.); +#336992 = DIRECTION('',(0.,1.,0.)); +#336993 = PLANE('',#336994); +#336994 = AXIS2_PLACEMENT_3D('',#336995,#336996,#336997); +#336995 = CARTESIAN_POINT('',(147.525,-131.025,0.)); +#336996 = DIRECTION('',(1.,-0.,0.)); +#336997 = DIRECTION('',(0.,1.,0.)); +#336998 = ADVANCED_FACE('',(#336999),#337009,.F.); +#336999 = FACE_BOUND('',#337000,.F.); +#337000 = EDGE_LOOP('',(#337001,#337002,#337003,#337004,#337005,#337006, + #337007,#337008)); +#337001 = ORIENTED_EDGE('',*,*,#336773,.T.); +#337002 = ORIENTED_EDGE('',*,*,#336805,.T.); +#337003 = ORIENTED_EDGE('',*,*,#336837,.T.); +#337004 = ORIENTED_EDGE('',*,*,#336869,.T.); +#337005 = ORIENTED_EDGE('',*,*,#336901,.T.); +#337006 = ORIENTED_EDGE('',*,*,#336933,.T.); +#337007 = ORIENTED_EDGE('',*,*,#336965,.T.); +#337008 = ORIENTED_EDGE('',*,*,#336988,.T.); +#337009 = PLANE('',#337010); +#337010 = AXIS2_PLACEMENT_3D('',#337011,#337012,#337013); +#337011 = CARTESIAN_POINT('',(0.,0.,0.)); +#337012 = DIRECTION('',(-0.,-0.,-1.)); +#337013 = DIRECTION('',(-1.,0.,0.)); +#337014 = ADVANCED_FACE('',(#337015),#337025,.T.); +#337015 = FACE_BOUND('',#337016,.T.); +#337016 = EDGE_LOOP('',(#337017,#337018,#337019,#337020,#337021,#337022, + #337023,#337024)); +#337017 = ORIENTED_EDGE('',*,*,#336756,.T.); +#337018 = ORIENTED_EDGE('',*,*,#336789,.T.); +#337019 = ORIENTED_EDGE('',*,*,#336820,.T.); +#337020 = ORIENTED_EDGE('',*,*,#336853,.T.); +#337021 = ORIENTED_EDGE('',*,*,#336884,.T.); +#337022 = ORIENTED_EDGE('',*,*,#336917,.T.); +#337023 = ORIENTED_EDGE('',*,*,#336948,.T.); +#337024 = ORIENTED_EDGE('',*,*,#336981,.T.); +#337025 = PLANE('',#337026); +#337026 = AXIS2_PLACEMENT_3D('',#337027,#337028,#337029); +#337027 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#337028 = DIRECTION('',(-0.,-0.,-1.)); +#337029 = DIRECTION('',(-1.,0.,0.)); +#337030 = MANIFOLD_SOLID_BREP('',#337031); +#337031 = CLOSED_SHELL('',(#337032,#337074,#337105,#337138,#337169, + #337202,#337233,#337266,#337288,#337304)); +#337032 = ADVANCED_FACE('',(#337033),#337069,.T.); +#337033 = FACE_BOUND('',#337034,.F.); +#337034 = EDGE_LOOP('',(#337035,#337045,#337054,#337062)); +#337035 = ORIENTED_EDGE('',*,*,#337036,.T.); +#337036 = EDGE_CURVE('',#337037,#337039,#337041,.T.); +#337037 = VERTEX_POINT('',#337038); +#337038 = CARTESIAN_POINT('',(139.825,-77.475,0.)); +#337039 = VERTEX_POINT('',#337040); +#337040 = CARTESIAN_POINT('',(139.825,-77.475,-4.E-02)); +#337041 = LINE('',#337042,#337043); +#337042 = CARTESIAN_POINT('',(139.825,-77.475,0.)); +#337043 = VECTOR('',#337044,1.); +#337044 = DIRECTION('',(0.,0.,-1.)); +#337045 = ORIENTED_EDGE('',*,*,#337046,.T.); +#337046 = EDGE_CURVE('',#337039,#337047,#337049,.T.); +#337047 = VERTEX_POINT('',#337048); +#337048 = CARTESIAN_POINT('',(139.9125,-77.3875,-4.E-02)); +#337049 = CIRCLE('',#337050,8.74994651821E-02); +#337050 = AXIS2_PLACEMENT_3D('',#337051,#337052,#337053); +#337051 = CARTESIAN_POINT('',(139.91249946518,-77.47499946518,-4.E-02)); +#337052 = DIRECTION('',(0.,0.,-1.)); +#337053 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337054 = ORIENTED_EDGE('',*,*,#337055,.F.); +#337055 = EDGE_CURVE('',#337056,#337047,#337058,.T.); +#337056 = VERTEX_POINT('',#337057); +#337057 = CARTESIAN_POINT('',(139.9125,-77.3875,0.)); +#337058 = LINE('',#337059,#337060); +#337059 = CARTESIAN_POINT('',(139.9125,-77.3875,0.)); +#337060 = VECTOR('',#337061,1.); +#337061 = DIRECTION('',(0.,0.,-1.)); +#337062 = ORIENTED_EDGE('',*,*,#337063,.F.); +#337063 = EDGE_CURVE('',#337037,#337056,#337064,.T.); +#337064 = CIRCLE('',#337065,8.74994651821E-02); +#337065 = AXIS2_PLACEMENT_3D('',#337066,#337067,#337068); +#337066 = CARTESIAN_POINT('',(139.91249946518,-77.47499946518,0.)); +#337067 = DIRECTION('',(0.,0.,-1.)); +#337068 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337069 = CYLINDRICAL_SURFACE('',#337070,8.74994651821E-02); +#337070 = AXIS2_PLACEMENT_3D('',#337071,#337072,#337073); +#337071 = CARTESIAN_POINT('',(139.91249946518,-77.47499946518,0.)); +#337072 = DIRECTION('',(-0.,-0.,1.)); +#337073 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337074 = ADVANCED_FACE('',(#337075),#337100,.F.); +#337075 = FACE_BOUND('',#337076,.F.); +#337076 = EDGE_LOOP('',(#337077,#337078,#337086,#337094)); +#337077 = ORIENTED_EDGE('',*,*,#337055,.T.); +#337078 = ORIENTED_EDGE('',*,*,#337079,.T.); +#337079 = EDGE_CURVE('',#337047,#337080,#337082,.T.); +#337080 = VERTEX_POINT('',#337081); +#337081 = CARTESIAN_POINT('',(140.3625,-77.3875,-4.E-02)); +#337082 = LINE('',#337083,#337084); +#337083 = CARTESIAN_POINT('',(139.9125,-77.3875,-4.E-02)); +#337084 = VECTOR('',#337085,1.); +#337085 = DIRECTION('',(1.,0.,0.)); +#337086 = ORIENTED_EDGE('',*,*,#337087,.F.); +#337087 = EDGE_CURVE('',#337088,#337080,#337090,.T.); +#337088 = VERTEX_POINT('',#337089); +#337089 = CARTESIAN_POINT('',(140.3625,-77.3875,0.)); +#337090 = LINE('',#337091,#337092); +#337091 = CARTESIAN_POINT('',(140.3625,-77.3875,0.)); +#337092 = VECTOR('',#337093,1.); +#337093 = DIRECTION('',(0.,0.,-1.)); +#337094 = ORIENTED_EDGE('',*,*,#337095,.F.); +#337095 = EDGE_CURVE('',#337056,#337088,#337096,.T.); +#337096 = LINE('',#337097,#337098); +#337097 = CARTESIAN_POINT('',(139.9125,-77.3875,0.)); +#337098 = VECTOR('',#337099,1.); +#337099 = DIRECTION('',(1.,0.,0.)); +#337100 = PLANE('',#337101); +#337101 = AXIS2_PLACEMENT_3D('',#337102,#337103,#337104); +#337102 = CARTESIAN_POINT('',(139.9125,-77.3875,0.)); +#337103 = DIRECTION('',(0.,-1.,0.)); +#337104 = DIRECTION('',(1.,0.,0.)); +#337105 = ADVANCED_FACE('',(#337106),#337133,.T.); +#337106 = FACE_BOUND('',#337107,.F.); +#337107 = EDGE_LOOP('',(#337108,#337109,#337118,#337126)); +#337108 = ORIENTED_EDGE('',*,*,#337087,.T.); +#337109 = ORIENTED_EDGE('',*,*,#337110,.T.); +#337110 = EDGE_CURVE('',#337080,#337111,#337113,.T.); +#337111 = VERTEX_POINT('',#337112); +#337112 = CARTESIAN_POINT('',(140.45,-77.475,-4.E-02)); +#337113 = CIRCLE('',#337114,8.749946518204E-02); +#337114 = AXIS2_PLACEMENT_3D('',#337115,#337116,#337117); +#337115 = CARTESIAN_POINT('',(140.36250053482,-77.47499946518,-4.E-02)); +#337116 = DIRECTION('',(0.,0.,-1.)); +#337117 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337118 = ORIENTED_EDGE('',*,*,#337119,.F.); +#337119 = EDGE_CURVE('',#337120,#337111,#337122,.T.); +#337120 = VERTEX_POINT('',#337121); +#337121 = CARTESIAN_POINT('',(140.45,-77.475,0.)); +#337122 = LINE('',#337123,#337124); +#337123 = CARTESIAN_POINT('',(140.45,-77.475,0.)); +#337124 = VECTOR('',#337125,1.); +#337125 = DIRECTION('',(0.,0.,-1.)); +#337126 = ORIENTED_EDGE('',*,*,#337127,.F.); +#337127 = EDGE_CURVE('',#337088,#337120,#337128,.T.); +#337128 = CIRCLE('',#337129,8.749946518204E-02); +#337129 = AXIS2_PLACEMENT_3D('',#337130,#337131,#337132); +#337130 = CARTESIAN_POINT('',(140.36250053482,-77.47499946518,0.)); +#337131 = DIRECTION('',(0.,0.,-1.)); +#337132 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337133 = CYLINDRICAL_SURFACE('',#337134,8.749946518204E-02); +#337134 = AXIS2_PLACEMENT_3D('',#337135,#337136,#337137); +#337135 = CARTESIAN_POINT('',(140.36250053482,-77.47499946518,0.)); +#337136 = DIRECTION('',(-0.,-0.,1.)); +#337137 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337138 = ADVANCED_FACE('',(#337139),#337164,.F.); +#337139 = FACE_BOUND('',#337140,.F.); +#337140 = EDGE_LOOP('',(#337141,#337142,#337150,#337158)); +#337141 = ORIENTED_EDGE('',*,*,#337119,.T.); +#337142 = ORIENTED_EDGE('',*,*,#337143,.T.); +#337143 = EDGE_CURVE('',#337111,#337144,#337146,.T.); +#337144 = VERTEX_POINT('',#337145); +#337145 = CARTESIAN_POINT('',(140.45,-77.65,-4.E-02)); +#337146 = LINE('',#337147,#337148); +#337147 = CARTESIAN_POINT('',(140.45,-77.475,-4.E-02)); +#337148 = VECTOR('',#337149,1.); +#337149 = DIRECTION('',(0.,-1.,0.)); +#337150 = ORIENTED_EDGE('',*,*,#337151,.F.); +#337151 = EDGE_CURVE('',#337152,#337144,#337154,.T.); +#337152 = VERTEX_POINT('',#337153); +#337153 = CARTESIAN_POINT('',(140.45,-77.65,0.)); +#337154 = LINE('',#337155,#337156); +#337155 = CARTESIAN_POINT('',(140.45,-77.65,0.)); +#337156 = VECTOR('',#337157,1.); +#337157 = DIRECTION('',(0.,0.,-1.)); +#337158 = ORIENTED_EDGE('',*,*,#337159,.F.); +#337159 = EDGE_CURVE('',#337120,#337152,#337160,.T.); +#337160 = LINE('',#337161,#337162); +#337161 = CARTESIAN_POINT('',(140.45,-77.475,0.)); +#337162 = VECTOR('',#337163,1.); +#337163 = DIRECTION('',(0.,-1.,0.)); +#337164 = PLANE('',#337165); +#337165 = AXIS2_PLACEMENT_3D('',#337166,#337167,#337168); +#337166 = CARTESIAN_POINT('',(140.45,-77.475,0.)); +#337167 = DIRECTION('',(-1.,-0.,-0.)); +#337168 = DIRECTION('',(0.,-1.,0.)); +#337169 = ADVANCED_FACE('',(#337170),#337197,.T.); +#337170 = FACE_BOUND('',#337171,.F.); +#337171 = EDGE_LOOP('',(#337172,#337173,#337182,#337190)); +#337172 = ORIENTED_EDGE('',*,*,#337151,.T.); +#337173 = ORIENTED_EDGE('',*,*,#337174,.T.); +#337174 = EDGE_CURVE('',#337144,#337175,#337177,.T.); +#337175 = VERTEX_POINT('',#337176); +#337176 = CARTESIAN_POINT('',(140.3625,-77.7375,-4.E-02)); +#337177 = CIRCLE('',#337178,8.749946518204E-02); +#337178 = AXIS2_PLACEMENT_3D('',#337179,#337180,#337181); +#337179 = CARTESIAN_POINT('',(140.36250053482,-77.65000053482,-4.E-02)); +#337180 = DIRECTION('',(0.,0.,-1.)); +#337181 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#337182 = ORIENTED_EDGE('',*,*,#337183,.F.); +#337183 = EDGE_CURVE('',#337184,#337175,#337186,.T.); +#337184 = VERTEX_POINT('',#337185); +#337185 = CARTESIAN_POINT('',(140.3625,-77.7375,0.)); +#337186 = LINE('',#337187,#337188); +#337187 = CARTESIAN_POINT('',(140.3625,-77.7375,0.)); +#337188 = VECTOR('',#337189,1.); +#337189 = DIRECTION('',(0.,0.,-1.)); +#337190 = ORIENTED_EDGE('',*,*,#337191,.F.); +#337191 = EDGE_CURVE('',#337152,#337184,#337192,.T.); +#337192 = CIRCLE('',#337193,8.749946518204E-02); +#337193 = AXIS2_PLACEMENT_3D('',#337194,#337195,#337196); +#337194 = CARTESIAN_POINT('',(140.36250053482,-77.65000053482,0.)); +#337195 = DIRECTION('',(0.,0.,-1.)); +#337196 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#337197 = CYLINDRICAL_SURFACE('',#337198,8.749946518204E-02); +#337198 = AXIS2_PLACEMENT_3D('',#337199,#337200,#337201); +#337199 = CARTESIAN_POINT('',(140.36250053482,-77.65000053482,0.)); +#337200 = DIRECTION('',(-0.,-0.,1.)); +#337201 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#337202 = ADVANCED_FACE('',(#337203),#337228,.F.); +#337203 = FACE_BOUND('',#337204,.F.); +#337204 = EDGE_LOOP('',(#337205,#337206,#337214,#337222)); +#337205 = ORIENTED_EDGE('',*,*,#337183,.T.); +#337206 = ORIENTED_EDGE('',*,*,#337207,.T.); +#337207 = EDGE_CURVE('',#337175,#337208,#337210,.T.); +#337208 = VERTEX_POINT('',#337209); +#337209 = CARTESIAN_POINT('',(139.9125,-77.7375,-4.E-02)); +#337210 = LINE('',#337211,#337212); +#337211 = CARTESIAN_POINT('',(140.3625,-77.7375,-4.E-02)); +#337212 = VECTOR('',#337213,1.); +#337213 = DIRECTION('',(-1.,0.,0.)); +#337214 = ORIENTED_EDGE('',*,*,#337215,.F.); +#337215 = EDGE_CURVE('',#337216,#337208,#337218,.T.); +#337216 = VERTEX_POINT('',#337217); +#337217 = CARTESIAN_POINT('',(139.9125,-77.7375,0.)); +#337218 = LINE('',#337219,#337220); +#337219 = CARTESIAN_POINT('',(139.9125,-77.7375,0.)); +#337220 = VECTOR('',#337221,1.); +#337221 = DIRECTION('',(0.,0.,-1.)); +#337222 = ORIENTED_EDGE('',*,*,#337223,.F.); +#337223 = EDGE_CURVE('',#337184,#337216,#337224,.T.); +#337224 = LINE('',#337225,#337226); +#337225 = CARTESIAN_POINT('',(140.3625,-77.7375,0.)); +#337226 = VECTOR('',#337227,1.); +#337227 = DIRECTION('',(-1.,0.,0.)); +#337228 = PLANE('',#337229); +#337229 = AXIS2_PLACEMENT_3D('',#337230,#337231,#337232); +#337230 = CARTESIAN_POINT('',(140.3625,-77.7375,0.)); +#337231 = DIRECTION('',(0.,1.,0.)); +#337232 = DIRECTION('',(-1.,0.,0.)); +#337233 = ADVANCED_FACE('',(#337234),#337261,.T.); +#337234 = FACE_BOUND('',#337235,.F.); +#337235 = EDGE_LOOP('',(#337236,#337237,#337246,#337254)); +#337236 = ORIENTED_EDGE('',*,*,#337215,.T.); +#337237 = ORIENTED_EDGE('',*,*,#337238,.T.); +#337238 = EDGE_CURVE('',#337208,#337239,#337241,.T.); +#337239 = VERTEX_POINT('',#337240); +#337240 = CARTESIAN_POINT('',(139.825,-77.65,-4.E-02)); +#337241 = CIRCLE('',#337242,8.74994651821E-02); +#337242 = AXIS2_PLACEMENT_3D('',#337243,#337244,#337245); +#337243 = CARTESIAN_POINT('',(139.91249946518,-77.65000053482,-4.E-02)); +#337244 = DIRECTION('',(0.,0.,-1.)); +#337245 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#337246 = ORIENTED_EDGE('',*,*,#337247,.F.); +#337247 = EDGE_CURVE('',#337248,#337239,#337250,.T.); +#337248 = VERTEX_POINT('',#337249); +#337249 = CARTESIAN_POINT('',(139.825,-77.65,0.)); +#337250 = LINE('',#337251,#337252); +#337251 = CARTESIAN_POINT('',(139.825,-77.65,0.)); +#337252 = VECTOR('',#337253,1.); +#337253 = DIRECTION('',(0.,0.,-1.)); +#337254 = ORIENTED_EDGE('',*,*,#337255,.F.); +#337255 = EDGE_CURVE('',#337216,#337248,#337256,.T.); +#337256 = CIRCLE('',#337257,8.74994651821E-02); +#337257 = AXIS2_PLACEMENT_3D('',#337258,#337259,#337260); +#337258 = CARTESIAN_POINT('',(139.91249946518,-77.65000053482,0.)); +#337259 = DIRECTION('',(0.,0.,-1.)); +#337260 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#337261 = CYLINDRICAL_SURFACE('',#337262,8.74994651821E-02); +#337262 = AXIS2_PLACEMENT_3D('',#337263,#337264,#337265); +#337263 = CARTESIAN_POINT('',(139.91249946518,-77.65000053482,0.)); +#337264 = DIRECTION('',(-0.,-0.,1.)); +#337265 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#337266 = ADVANCED_FACE('',(#337267),#337283,.F.); +#337267 = FACE_BOUND('',#337268,.F.); +#337268 = EDGE_LOOP('',(#337269,#337270,#337276,#337277)); +#337269 = ORIENTED_EDGE('',*,*,#337247,.T.); +#337270 = ORIENTED_EDGE('',*,*,#337271,.T.); +#337271 = EDGE_CURVE('',#337239,#337039,#337272,.T.); +#337272 = LINE('',#337273,#337274); +#337273 = CARTESIAN_POINT('',(139.825,-77.65,-4.E-02)); +#337274 = VECTOR('',#337275,1.); +#337275 = DIRECTION('',(0.,1.,0.)); +#337276 = ORIENTED_EDGE('',*,*,#337036,.F.); +#337277 = ORIENTED_EDGE('',*,*,#337278,.F.); +#337278 = EDGE_CURVE('',#337248,#337037,#337279,.T.); +#337279 = LINE('',#337280,#337281); +#337280 = CARTESIAN_POINT('',(139.825,-77.65,0.)); +#337281 = VECTOR('',#337282,1.); +#337282 = DIRECTION('',(0.,1.,0.)); +#337283 = PLANE('',#337284); +#337284 = AXIS2_PLACEMENT_3D('',#337285,#337286,#337287); +#337285 = CARTESIAN_POINT('',(139.825,-77.65,0.)); +#337286 = DIRECTION('',(1.,-0.,0.)); +#337287 = DIRECTION('',(0.,1.,0.)); +#337288 = ADVANCED_FACE('',(#337289),#337299,.F.); +#337289 = FACE_BOUND('',#337290,.F.); +#337290 = EDGE_LOOP('',(#337291,#337292,#337293,#337294,#337295,#337296, + #337297,#337298)); +#337291 = ORIENTED_EDGE('',*,*,#337063,.T.); +#337292 = ORIENTED_EDGE('',*,*,#337095,.T.); +#337293 = ORIENTED_EDGE('',*,*,#337127,.T.); +#337294 = ORIENTED_EDGE('',*,*,#337159,.T.); +#337295 = ORIENTED_EDGE('',*,*,#337191,.T.); +#337296 = ORIENTED_EDGE('',*,*,#337223,.T.); +#337297 = ORIENTED_EDGE('',*,*,#337255,.T.); +#337298 = ORIENTED_EDGE('',*,*,#337278,.T.); +#337299 = PLANE('',#337300); +#337300 = AXIS2_PLACEMENT_3D('',#337301,#337302,#337303); +#337301 = CARTESIAN_POINT('',(0.,0.,0.)); +#337302 = DIRECTION('',(-0.,-0.,-1.)); +#337303 = DIRECTION('',(-1.,0.,0.)); +#337304 = ADVANCED_FACE('',(#337305),#337315,.T.); +#337305 = FACE_BOUND('',#337306,.T.); +#337306 = EDGE_LOOP('',(#337307,#337308,#337309,#337310,#337311,#337312, + #337313,#337314)); +#337307 = ORIENTED_EDGE('',*,*,#337046,.T.); +#337308 = ORIENTED_EDGE('',*,*,#337079,.T.); +#337309 = ORIENTED_EDGE('',*,*,#337110,.T.); +#337310 = ORIENTED_EDGE('',*,*,#337143,.T.); +#337311 = ORIENTED_EDGE('',*,*,#337174,.T.); +#337312 = ORIENTED_EDGE('',*,*,#337207,.T.); +#337313 = ORIENTED_EDGE('',*,*,#337238,.T.); +#337314 = ORIENTED_EDGE('',*,*,#337271,.T.); +#337315 = PLANE('',#337316); +#337316 = AXIS2_PLACEMENT_3D('',#337317,#337318,#337319); +#337317 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#337318 = DIRECTION('',(-0.,-0.,-1.)); +#337319 = DIRECTION('',(-1.,0.,0.)); +#337320 = MANIFOLD_SOLID_BREP('',#337321); +#337321 = CLOSED_SHELL('',(#337322,#337355,#337364)); +#337322 = ADVANCED_FACE('',(#337323),#337350,.T.); +#337323 = FACE_BOUND('',#337324,.T.); +#337324 = EDGE_LOOP('',(#337325,#337335,#337342,#337343)); +#337325 = ORIENTED_EDGE('',*,*,#337326,.T.); +#337326 = EDGE_CURVE('',#337327,#337329,#337331,.T.); +#337327 = VERTEX_POINT('',#337328); +#337328 = CARTESIAN_POINT('',(150.9,-105.2,0.)); +#337329 = VERTEX_POINT('',#337330); +#337330 = CARTESIAN_POINT('',(150.9,-105.2,-4.E-02)); +#337331 = LINE('',#337332,#337333); +#337332 = CARTESIAN_POINT('',(150.9,-105.2,0.)); +#337333 = VECTOR('',#337334,1.); +#337334 = DIRECTION('',(0.,0.,-1.)); +#337335 = ORIENTED_EDGE('',*,*,#337336,.T.); +#337336 = EDGE_CURVE('',#337329,#337329,#337337,.T.); +#337337 = CIRCLE('',#337338,0.5); +#337338 = AXIS2_PLACEMENT_3D('',#337339,#337340,#337341); +#337339 = CARTESIAN_POINT('',(150.4,-105.2,-4.E-02)); +#337340 = DIRECTION('',(0.,0.,1.)); +#337341 = DIRECTION('',(1.,0.,-0.)); +#337342 = ORIENTED_EDGE('',*,*,#337326,.F.); +#337343 = ORIENTED_EDGE('',*,*,#337344,.F.); +#337344 = EDGE_CURVE('',#337327,#337327,#337345,.T.); +#337345 = CIRCLE('',#337346,0.5); +#337346 = AXIS2_PLACEMENT_3D('',#337347,#337348,#337349); +#337347 = CARTESIAN_POINT('',(150.4,-105.2,0.)); +#337348 = DIRECTION('',(0.,0.,1.)); +#337349 = DIRECTION('',(1.,0.,-0.)); +#337350 = CYLINDRICAL_SURFACE('',#337351,0.5); +#337351 = AXIS2_PLACEMENT_3D('',#337352,#337353,#337354); +#337352 = CARTESIAN_POINT('',(150.4,-105.2,0.)); +#337353 = DIRECTION('',(0.,0.,1.)); +#337354 = DIRECTION('',(1.,0.,-0.)); +#337355 = ADVANCED_FACE('',(#337356),#337359,.F.); +#337356 = FACE_BOUND('',#337357,.T.); +#337357 = EDGE_LOOP('',(#337358)); +#337358 = ORIENTED_EDGE('',*,*,#337344,.T.); +#337359 = PLANE('',#337360); +#337360 = AXIS2_PLACEMENT_3D('',#337361,#337362,#337363); +#337361 = CARTESIAN_POINT('',(0.,0.,0.)); +#337362 = DIRECTION('',(-0.,-0.,-1.)); +#337363 = DIRECTION('',(-1.,0.,0.)); +#337364 = ADVANCED_FACE('',(#337365),#337368,.T.); +#337365 = FACE_BOUND('',#337366,.F.); +#337366 = EDGE_LOOP('',(#337367)); +#337367 = ORIENTED_EDGE('',*,*,#337336,.T.); +#337368 = PLANE('',#337369); +#337369 = AXIS2_PLACEMENT_3D('',#337370,#337371,#337372); +#337370 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#337371 = DIRECTION('',(-0.,-0.,-1.)); +#337372 = DIRECTION('',(-1.,0.,0.)); +#337373 = MANIFOLD_SOLID_BREP('',#337374); +#337374 = CLOSED_SHELL('',(#337375,#337408,#337417)); +#337375 = ADVANCED_FACE('',(#337376),#337403,.T.); +#337376 = FACE_BOUND('',#337377,.T.); +#337377 = EDGE_LOOP('',(#337378,#337388,#337395,#337396)); +#337378 = ORIENTED_EDGE('',*,*,#337379,.T.); +#337379 = EDGE_CURVE('',#337380,#337382,#337384,.T.); +#337380 = VERTEX_POINT('',#337381); +#337381 = CARTESIAN_POINT('',(126.4,-95.3,0.)); +#337382 = VERTEX_POINT('',#337383); +#337383 = CARTESIAN_POINT('',(126.4,-95.3,-4.E-02)); +#337384 = LINE('',#337385,#337386); +#337385 = CARTESIAN_POINT('',(126.4,-95.3,0.)); +#337386 = VECTOR('',#337387,1.); +#337387 = DIRECTION('',(0.,0.,-1.)); +#337388 = ORIENTED_EDGE('',*,*,#337389,.T.); +#337389 = EDGE_CURVE('',#337382,#337382,#337390,.T.); +#337390 = CIRCLE('',#337391,0.5); +#337391 = AXIS2_PLACEMENT_3D('',#337392,#337393,#337394); +#337392 = CARTESIAN_POINT('',(125.9,-95.3,-4.E-02)); +#337393 = DIRECTION('',(0.,0.,1.)); +#337394 = DIRECTION('',(1.,0.,-0.)); +#337395 = ORIENTED_EDGE('',*,*,#337379,.F.); +#337396 = ORIENTED_EDGE('',*,*,#337397,.F.); +#337397 = EDGE_CURVE('',#337380,#337380,#337398,.T.); +#337398 = CIRCLE('',#337399,0.5); +#337399 = AXIS2_PLACEMENT_3D('',#337400,#337401,#337402); +#337400 = CARTESIAN_POINT('',(125.9,-95.3,0.)); +#337401 = DIRECTION('',(0.,0.,1.)); +#337402 = DIRECTION('',(1.,0.,-0.)); +#337403 = CYLINDRICAL_SURFACE('',#337404,0.5); +#337404 = AXIS2_PLACEMENT_3D('',#337405,#337406,#337407); +#337405 = CARTESIAN_POINT('',(125.9,-95.3,0.)); +#337406 = DIRECTION('',(0.,0.,1.)); +#337407 = DIRECTION('',(1.,0.,-0.)); +#337408 = ADVANCED_FACE('',(#337409),#337412,.F.); +#337409 = FACE_BOUND('',#337410,.T.); +#337410 = EDGE_LOOP('',(#337411)); +#337411 = ORIENTED_EDGE('',*,*,#337397,.T.); +#337412 = PLANE('',#337413); +#337413 = AXIS2_PLACEMENT_3D('',#337414,#337415,#337416); +#337414 = CARTESIAN_POINT('',(0.,0.,0.)); +#337415 = DIRECTION('',(-0.,-0.,-1.)); +#337416 = DIRECTION('',(-1.,0.,0.)); +#337417 = ADVANCED_FACE('',(#337418),#337421,.T.); +#337418 = FACE_BOUND('',#337419,.F.); +#337419 = EDGE_LOOP('',(#337420)); +#337420 = ORIENTED_EDGE('',*,*,#337389,.T.); +#337421 = PLANE('',#337422); +#337422 = AXIS2_PLACEMENT_3D('',#337423,#337424,#337425); +#337423 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#337424 = DIRECTION('',(-0.,-0.,-1.)); +#337425 = DIRECTION('',(-1.,0.,0.)); +#337426 = MANIFOLD_SOLID_BREP('',#337427); +#337427 = CLOSED_SHELL('',(#337428,#337468,#337499,#337530,#337552, + #337564)); +#337428 = ADVANCED_FACE('',(#337429),#337463,.T.); +#337429 = FACE_BOUND('',#337430,.T.); +#337430 = EDGE_LOOP('',(#337431,#337441,#337449,#337457)); +#337431 = ORIENTED_EDGE('',*,*,#337432,.T.); +#337432 = EDGE_CURVE('',#337433,#337435,#337437,.T.); +#337433 = VERTEX_POINT('',#337434); +#337434 = CARTESIAN_POINT('',(133.105,-83.16,1.51)); +#337435 = VERTEX_POINT('',#337436); +#337436 = CARTESIAN_POINT('',(133.105,-83.16,1.55)); +#337437 = LINE('',#337438,#337439); +#337438 = CARTESIAN_POINT('',(133.105,-83.16,1.51)); +#337439 = VECTOR('',#337440,1.); +#337440 = DIRECTION('',(0.,0.,1.)); +#337441 = ORIENTED_EDGE('',*,*,#337442,.T.); +#337442 = EDGE_CURVE('',#337435,#337443,#337445,.T.); +#337443 = VERTEX_POINT('',#337444); +#337444 = CARTESIAN_POINT('',(133.105,-81.66,1.55)); +#337445 = LINE('',#337446,#337447); +#337446 = CARTESIAN_POINT('',(133.105,-83.16,1.55)); +#337447 = VECTOR('',#337448,1.); +#337448 = DIRECTION('',(0.,1.,0.)); +#337449 = ORIENTED_EDGE('',*,*,#337450,.F.); +#337450 = EDGE_CURVE('',#337451,#337443,#337453,.T.); +#337451 = VERTEX_POINT('',#337452); +#337452 = CARTESIAN_POINT('',(133.105,-81.66,1.51)); +#337453 = LINE('',#337454,#337455); +#337454 = CARTESIAN_POINT('',(133.105,-81.66,1.51)); +#337455 = VECTOR('',#337456,1.); +#337456 = DIRECTION('',(0.,0.,1.)); +#337457 = ORIENTED_EDGE('',*,*,#337458,.F.); +#337458 = EDGE_CURVE('',#337433,#337451,#337459,.T.); +#337459 = LINE('',#337460,#337461); +#337460 = CARTESIAN_POINT('',(133.105,-83.16,1.51)); +#337461 = VECTOR('',#337462,1.); +#337462 = DIRECTION('',(0.,1.,0.)); +#337463 = PLANE('',#337464); +#337464 = AXIS2_PLACEMENT_3D('',#337465,#337466,#337467); +#337465 = CARTESIAN_POINT('',(133.105,-83.16,1.51)); +#337466 = DIRECTION('',(-1.,0.,0.)); +#337467 = DIRECTION('',(0.,1.,0.)); +#337468 = ADVANCED_FACE('',(#337469),#337494,.T.); +#337469 = FACE_BOUND('',#337470,.T.); +#337470 = EDGE_LOOP('',(#337471,#337472,#337480,#337488)); +#337471 = ORIENTED_EDGE('',*,*,#337450,.T.); +#337472 = ORIENTED_EDGE('',*,*,#337473,.T.); +#337473 = EDGE_CURVE('',#337443,#337474,#337476,.T.); +#337474 = VERTEX_POINT('',#337475); +#337475 = CARTESIAN_POINT('',(134.005,-81.66,1.55)); +#337476 = LINE('',#337477,#337478); +#337477 = CARTESIAN_POINT('',(133.105,-81.66,1.55)); +#337478 = VECTOR('',#337479,1.); +#337479 = DIRECTION('',(1.,0.,0.)); +#337480 = ORIENTED_EDGE('',*,*,#337481,.F.); +#337481 = EDGE_CURVE('',#337482,#337474,#337484,.T.); +#337482 = VERTEX_POINT('',#337483); +#337483 = CARTESIAN_POINT('',(134.005,-81.66,1.51)); +#337484 = LINE('',#337485,#337486); +#337485 = CARTESIAN_POINT('',(134.005,-81.66,1.51)); +#337486 = VECTOR('',#337487,1.); +#337487 = DIRECTION('',(0.,0.,1.)); +#337488 = ORIENTED_EDGE('',*,*,#337489,.F.); +#337489 = EDGE_CURVE('',#337451,#337482,#337490,.T.); +#337490 = LINE('',#337491,#337492); +#337491 = CARTESIAN_POINT('',(133.105,-81.66,1.51)); +#337492 = VECTOR('',#337493,1.); +#337493 = DIRECTION('',(1.,0.,0.)); +#337494 = PLANE('',#337495); +#337495 = AXIS2_PLACEMENT_3D('',#337496,#337497,#337498); +#337496 = CARTESIAN_POINT('',(133.105,-81.66,1.51)); +#337497 = DIRECTION('',(0.,1.,0.)); +#337498 = DIRECTION('',(1.,0.,0.)); +#337499 = ADVANCED_FACE('',(#337500),#337525,.T.); +#337500 = FACE_BOUND('',#337501,.T.); +#337501 = EDGE_LOOP('',(#337502,#337503,#337511,#337519)); +#337502 = ORIENTED_EDGE('',*,*,#337481,.T.); +#337503 = ORIENTED_EDGE('',*,*,#337504,.T.); +#337504 = EDGE_CURVE('',#337474,#337505,#337507,.T.); +#337505 = VERTEX_POINT('',#337506); +#337506 = CARTESIAN_POINT('',(134.005,-83.16,1.55)); +#337507 = LINE('',#337508,#337509); +#337508 = CARTESIAN_POINT('',(134.005,-81.66,1.55)); +#337509 = VECTOR('',#337510,1.); +#337510 = DIRECTION('',(0.,-1.,0.)); +#337511 = ORIENTED_EDGE('',*,*,#337512,.F.); +#337512 = EDGE_CURVE('',#337513,#337505,#337515,.T.); +#337513 = VERTEX_POINT('',#337514); +#337514 = CARTESIAN_POINT('',(134.005,-83.16,1.51)); +#337515 = LINE('',#337516,#337517); +#337516 = CARTESIAN_POINT('',(134.005,-83.16,1.51)); +#337517 = VECTOR('',#337518,1.); +#337518 = DIRECTION('',(0.,0.,1.)); +#337519 = ORIENTED_EDGE('',*,*,#337520,.F.); +#337520 = EDGE_CURVE('',#337482,#337513,#337521,.T.); +#337521 = LINE('',#337522,#337523); +#337522 = CARTESIAN_POINT('',(134.005,-81.66,1.51)); +#337523 = VECTOR('',#337524,1.); +#337524 = DIRECTION('',(0.,-1.,0.)); +#337525 = PLANE('',#337526); +#337526 = AXIS2_PLACEMENT_3D('',#337527,#337528,#337529); +#337527 = CARTESIAN_POINT('',(134.005,-81.66,1.51)); +#337528 = DIRECTION('',(1.,0.,-0.)); +#337529 = DIRECTION('',(0.,-1.,0.)); +#337530 = ADVANCED_FACE('',(#337531),#337547,.T.); +#337531 = FACE_BOUND('',#337532,.T.); +#337532 = EDGE_LOOP('',(#337533,#337534,#337540,#337541)); +#337533 = ORIENTED_EDGE('',*,*,#337512,.T.); +#337534 = ORIENTED_EDGE('',*,*,#337535,.T.); +#337535 = EDGE_CURVE('',#337505,#337435,#337536,.T.); +#337536 = LINE('',#337537,#337538); +#337537 = CARTESIAN_POINT('',(134.005,-83.16,1.55)); +#337538 = VECTOR('',#337539,1.); +#337539 = DIRECTION('',(-1.,0.,0.)); +#337540 = ORIENTED_EDGE('',*,*,#337432,.F.); +#337541 = ORIENTED_EDGE('',*,*,#337542,.F.); +#337542 = EDGE_CURVE('',#337513,#337433,#337543,.T.); +#337543 = LINE('',#337544,#337545); +#337544 = CARTESIAN_POINT('',(134.005,-83.16,1.51)); +#337545 = VECTOR('',#337546,1.); +#337546 = DIRECTION('',(-1.,0.,0.)); +#337547 = PLANE('',#337548); +#337548 = AXIS2_PLACEMENT_3D('',#337549,#337550,#337551); +#337549 = CARTESIAN_POINT('',(134.005,-83.16,1.51)); +#337550 = DIRECTION('',(0.,-1.,0.)); +#337551 = DIRECTION('',(-1.,0.,0.)); +#337552 = ADVANCED_FACE('',(#337553),#337559,.F.); +#337553 = FACE_BOUND('',#337554,.T.); +#337554 = EDGE_LOOP('',(#337555,#337556,#337557,#337558)); +#337555 = ORIENTED_EDGE('',*,*,#337458,.T.); +#337556 = ORIENTED_EDGE('',*,*,#337489,.T.); +#337557 = ORIENTED_EDGE('',*,*,#337520,.T.); +#337558 = ORIENTED_EDGE('',*,*,#337542,.T.); +#337559 = PLANE('',#337560); +#337560 = AXIS2_PLACEMENT_3D('',#337561,#337562,#337563); +#337561 = CARTESIAN_POINT('',(0.,0.,1.51)); +#337562 = DIRECTION('',(0.,0.,1.)); +#337563 = DIRECTION('',(1.,0.,-0.)); +#337564 = ADVANCED_FACE('',(#337565),#337571,.T.); +#337565 = FACE_BOUND('',#337566,.F.); +#337566 = EDGE_LOOP('',(#337567,#337568,#337569,#337570)); +#337567 = ORIENTED_EDGE('',*,*,#337442,.T.); +#337568 = ORIENTED_EDGE('',*,*,#337473,.T.); +#337569 = ORIENTED_EDGE('',*,*,#337504,.T.); +#337570 = ORIENTED_EDGE('',*,*,#337535,.T.); +#337571 = PLANE('',#337572); +#337572 = AXIS2_PLACEMENT_3D('',#337573,#337574,#337575); +#337573 = CARTESIAN_POINT('',(0.,0.,1.55)); +#337574 = DIRECTION('',(0.,0.,1.)); +#337575 = DIRECTION('',(1.,0.,-0.)); +#337576 = MANIFOLD_SOLID_BREP('',#337577); +#337577 = CLOSED_SHELL('',(#337578,#337620,#337651,#337684,#337715, + #337748,#337779,#337812,#337834,#337850)); +#337578 = ADVANCED_FACE('',(#337579),#337615,.T.); +#337579 = FACE_BOUND('',#337580,.T.); +#337580 = EDGE_LOOP('',(#337581,#337591,#337600,#337608)); +#337581 = ORIENTED_EDGE('',*,*,#337582,.T.); +#337582 = EDGE_CURVE('',#337583,#337585,#337587,.T.); +#337583 = VERTEX_POINT('',#337584); +#337584 = CARTESIAN_POINT('',(122.3,-82.175,1.51)); +#337585 = VERTEX_POINT('',#337586); +#337586 = CARTESIAN_POINT('',(122.3,-82.175,1.55)); +#337587 = LINE('',#337588,#337589); +#337588 = CARTESIAN_POINT('',(122.3,-82.175,1.51)); +#337589 = VECTOR('',#337590,1.); +#337590 = DIRECTION('',(0.,0.,1.)); +#337591 = ORIENTED_EDGE('',*,*,#337592,.T.); +#337592 = EDGE_CURVE('',#337585,#337593,#337595,.T.); +#337593 = VERTEX_POINT('',#337594); +#337594 = CARTESIAN_POINT('',(122.45,-82.025,1.55)); +#337595 = CIRCLE('',#337596,0.150000058649); +#337596 = AXIS2_PLACEMENT_3D('',#337597,#337598,#337599); +#337597 = CARTESIAN_POINT('',(122.45000005864,-82.17500005864,1.55)); +#337598 = DIRECTION('',(0.,0.,-1.)); +#337599 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#337600 = ORIENTED_EDGE('',*,*,#337601,.F.); +#337601 = EDGE_CURVE('',#337602,#337593,#337604,.T.); +#337602 = VERTEX_POINT('',#337603); +#337603 = CARTESIAN_POINT('',(122.45,-82.025,1.51)); +#337604 = LINE('',#337605,#337606); +#337605 = CARTESIAN_POINT('',(122.45,-82.025,1.51)); +#337606 = VECTOR('',#337607,1.); +#337607 = DIRECTION('',(0.,0.,1.)); +#337608 = ORIENTED_EDGE('',*,*,#337609,.F.); +#337609 = EDGE_CURVE('',#337583,#337602,#337610,.T.); +#337610 = CIRCLE('',#337611,0.150000058649); +#337611 = AXIS2_PLACEMENT_3D('',#337612,#337613,#337614); +#337612 = CARTESIAN_POINT('',(122.45000005864,-82.17500005864,1.51)); +#337613 = DIRECTION('',(0.,0.,-1.)); +#337614 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#337615 = CYLINDRICAL_SURFACE('',#337616,0.150000058649); +#337616 = AXIS2_PLACEMENT_3D('',#337617,#337618,#337619); +#337617 = CARTESIAN_POINT('',(122.45000005864,-82.17500005864,1.51)); +#337618 = DIRECTION('',(0.,0.,-1.)); +#337619 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#337620 = ADVANCED_FACE('',(#337621),#337646,.T.); +#337621 = FACE_BOUND('',#337622,.T.); +#337622 = EDGE_LOOP('',(#337623,#337624,#337632,#337640)); +#337623 = ORIENTED_EDGE('',*,*,#337601,.T.); +#337624 = ORIENTED_EDGE('',*,*,#337625,.T.); +#337625 = EDGE_CURVE('',#337593,#337626,#337628,.T.); +#337626 = VERTEX_POINT('',#337627); +#337627 = CARTESIAN_POINT('',(122.75,-82.025,1.55)); +#337628 = LINE('',#337629,#337630); +#337629 = CARTESIAN_POINT('',(122.45,-82.025,1.55)); +#337630 = VECTOR('',#337631,1.); +#337631 = DIRECTION('',(1.,0.,0.)); +#337632 = ORIENTED_EDGE('',*,*,#337633,.F.); +#337633 = EDGE_CURVE('',#337634,#337626,#337636,.T.); +#337634 = VERTEX_POINT('',#337635); +#337635 = CARTESIAN_POINT('',(122.75,-82.025,1.51)); +#337636 = LINE('',#337637,#337638); +#337637 = CARTESIAN_POINT('',(122.75,-82.025,1.51)); +#337638 = VECTOR('',#337639,1.); +#337639 = DIRECTION('',(0.,0.,1.)); +#337640 = ORIENTED_EDGE('',*,*,#337641,.F.); +#337641 = EDGE_CURVE('',#337602,#337634,#337642,.T.); +#337642 = LINE('',#337643,#337644); +#337643 = CARTESIAN_POINT('',(122.45,-82.025,1.51)); +#337644 = VECTOR('',#337645,1.); +#337645 = DIRECTION('',(1.,0.,0.)); +#337646 = PLANE('',#337647); +#337647 = AXIS2_PLACEMENT_3D('',#337648,#337649,#337650); +#337648 = CARTESIAN_POINT('',(122.45,-82.025,1.51)); +#337649 = DIRECTION('',(0.,1.,0.)); +#337650 = DIRECTION('',(1.,0.,0.)); +#337651 = ADVANCED_FACE('',(#337652),#337679,.T.); +#337652 = FACE_BOUND('',#337653,.T.); +#337653 = EDGE_LOOP('',(#337654,#337655,#337664,#337672)); +#337654 = ORIENTED_EDGE('',*,*,#337633,.T.); +#337655 = ORIENTED_EDGE('',*,*,#337656,.T.); +#337656 = EDGE_CURVE('',#337626,#337657,#337659,.T.); +#337657 = VERTEX_POINT('',#337658); +#337658 = CARTESIAN_POINT('',(122.9,-82.175,1.55)); +#337659 = CIRCLE('',#337660,0.150000058649); +#337660 = AXIS2_PLACEMENT_3D('',#337661,#337662,#337663); +#337661 = CARTESIAN_POINT('',(122.74999994135,-82.17500005864,1.55)); +#337662 = DIRECTION('',(0.,0.,-1.)); +#337663 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#337664 = ORIENTED_EDGE('',*,*,#337665,.F.); +#337665 = EDGE_CURVE('',#337666,#337657,#337668,.T.); +#337666 = VERTEX_POINT('',#337667); +#337667 = CARTESIAN_POINT('',(122.9,-82.175,1.51)); +#337668 = LINE('',#337669,#337670); +#337669 = CARTESIAN_POINT('',(122.9,-82.175,1.51)); +#337670 = VECTOR('',#337671,1.); +#337671 = DIRECTION('',(0.,0.,1.)); +#337672 = ORIENTED_EDGE('',*,*,#337673,.F.); +#337673 = EDGE_CURVE('',#337634,#337666,#337674,.T.); +#337674 = CIRCLE('',#337675,0.150000058649); +#337675 = AXIS2_PLACEMENT_3D('',#337676,#337677,#337678); +#337676 = CARTESIAN_POINT('',(122.74999994135,-82.17500005864,1.51)); +#337677 = DIRECTION('',(0.,0.,-1.)); +#337678 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#337679 = CYLINDRICAL_SURFACE('',#337680,0.150000058649); +#337680 = AXIS2_PLACEMENT_3D('',#337681,#337682,#337683); +#337681 = CARTESIAN_POINT('',(122.74999994135,-82.17500005864,1.51)); +#337682 = DIRECTION('',(0.,0.,-1.)); +#337683 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#337684 = ADVANCED_FACE('',(#337685),#337710,.T.); +#337685 = FACE_BOUND('',#337686,.T.); +#337686 = EDGE_LOOP('',(#337687,#337688,#337696,#337704)); +#337687 = ORIENTED_EDGE('',*,*,#337665,.T.); +#337688 = ORIENTED_EDGE('',*,*,#337689,.T.); +#337689 = EDGE_CURVE('',#337657,#337690,#337692,.T.); +#337690 = VERTEX_POINT('',#337691); +#337691 = CARTESIAN_POINT('',(122.9,-83.425,1.55)); +#337692 = LINE('',#337693,#337694); +#337693 = CARTESIAN_POINT('',(122.9,-82.175,1.55)); +#337694 = VECTOR('',#337695,1.); +#337695 = DIRECTION('',(0.,-1.,0.)); +#337696 = ORIENTED_EDGE('',*,*,#337697,.F.); +#337697 = EDGE_CURVE('',#337698,#337690,#337700,.T.); +#337698 = VERTEX_POINT('',#337699); +#337699 = CARTESIAN_POINT('',(122.9,-83.425,1.51)); +#337700 = LINE('',#337701,#337702); +#337701 = CARTESIAN_POINT('',(122.9,-83.425,1.51)); +#337702 = VECTOR('',#337703,1.); +#337703 = DIRECTION('',(0.,0.,1.)); +#337704 = ORIENTED_EDGE('',*,*,#337705,.F.); +#337705 = EDGE_CURVE('',#337666,#337698,#337706,.T.); +#337706 = LINE('',#337707,#337708); +#337707 = CARTESIAN_POINT('',(122.9,-82.175,1.51)); +#337708 = VECTOR('',#337709,1.); +#337709 = DIRECTION('',(0.,-1.,0.)); +#337710 = PLANE('',#337711); +#337711 = AXIS2_PLACEMENT_3D('',#337712,#337713,#337714); +#337712 = CARTESIAN_POINT('',(122.9,-82.175,1.51)); +#337713 = DIRECTION('',(1.,0.,-0.)); +#337714 = DIRECTION('',(0.,-1.,0.)); +#337715 = ADVANCED_FACE('',(#337716),#337743,.T.); +#337716 = FACE_BOUND('',#337717,.T.); +#337717 = EDGE_LOOP('',(#337718,#337719,#337728,#337736)); +#337718 = ORIENTED_EDGE('',*,*,#337697,.T.); +#337719 = ORIENTED_EDGE('',*,*,#337720,.T.); +#337720 = EDGE_CURVE('',#337690,#337721,#337723,.T.); +#337721 = VERTEX_POINT('',#337722); +#337722 = CARTESIAN_POINT('',(122.75,-83.575,1.55)); +#337723 = CIRCLE('',#337724,0.150000058649); +#337724 = AXIS2_PLACEMENT_3D('',#337725,#337726,#337727); +#337725 = CARTESIAN_POINT('',(122.74999994135,-83.42499994135,1.55)); +#337726 = DIRECTION('',(0.,0.,-1.)); +#337727 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#337728 = ORIENTED_EDGE('',*,*,#337729,.F.); +#337729 = EDGE_CURVE('',#337730,#337721,#337732,.T.); +#337730 = VERTEX_POINT('',#337731); +#337731 = CARTESIAN_POINT('',(122.75,-83.575,1.51)); +#337732 = LINE('',#337733,#337734); +#337733 = CARTESIAN_POINT('',(122.75,-83.575,1.51)); +#337734 = VECTOR('',#337735,1.); +#337735 = DIRECTION('',(0.,0.,1.)); +#337736 = ORIENTED_EDGE('',*,*,#337737,.F.); +#337737 = EDGE_CURVE('',#337698,#337730,#337738,.T.); +#337738 = CIRCLE('',#337739,0.150000058649); +#337739 = AXIS2_PLACEMENT_3D('',#337740,#337741,#337742); +#337740 = CARTESIAN_POINT('',(122.74999994135,-83.42499994135,1.51)); +#337741 = DIRECTION('',(0.,0.,-1.)); +#337742 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#337743 = CYLINDRICAL_SURFACE('',#337744,0.150000058649); +#337744 = AXIS2_PLACEMENT_3D('',#337745,#337746,#337747); +#337745 = CARTESIAN_POINT('',(122.74999994135,-83.42499994135,1.51)); +#337746 = DIRECTION('',(0.,0.,-1.)); +#337747 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#337748 = ADVANCED_FACE('',(#337749),#337774,.T.); +#337749 = FACE_BOUND('',#337750,.T.); +#337750 = EDGE_LOOP('',(#337751,#337752,#337760,#337768)); +#337751 = ORIENTED_EDGE('',*,*,#337729,.T.); +#337752 = ORIENTED_EDGE('',*,*,#337753,.T.); +#337753 = EDGE_CURVE('',#337721,#337754,#337756,.T.); +#337754 = VERTEX_POINT('',#337755); +#337755 = CARTESIAN_POINT('',(122.45,-83.575,1.55)); +#337756 = LINE('',#337757,#337758); +#337757 = CARTESIAN_POINT('',(122.75,-83.575,1.55)); +#337758 = VECTOR('',#337759,1.); +#337759 = DIRECTION('',(-1.,0.,0.)); +#337760 = ORIENTED_EDGE('',*,*,#337761,.F.); +#337761 = EDGE_CURVE('',#337762,#337754,#337764,.T.); +#337762 = VERTEX_POINT('',#337763); +#337763 = CARTESIAN_POINT('',(122.45,-83.575,1.51)); +#337764 = LINE('',#337765,#337766); +#337765 = CARTESIAN_POINT('',(122.45,-83.575,1.51)); +#337766 = VECTOR('',#337767,1.); +#337767 = DIRECTION('',(0.,0.,1.)); +#337768 = ORIENTED_EDGE('',*,*,#337769,.F.); +#337769 = EDGE_CURVE('',#337730,#337762,#337770,.T.); +#337770 = LINE('',#337771,#337772); +#337771 = CARTESIAN_POINT('',(122.75,-83.575,1.51)); +#337772 = VECTOR('',#337773,1.); +#337773 = DIRECTION('',(-1.,0.,0.)); +#337774 = PLANE('',#337775); +#337775 = AXIS2_PLACEMENT_3D('',#337776,#337777,#337778); +#337776 = CARTESIAN_POINT('',(122.75,-83.575,1.51)); +#337777 = DIRECTION('',(0.,-1.,0.)); +#337778 = DIRECTION('',(-1.,0.,0.)); +#337779 = ADVANCED_FACE('',(#337780),#337807,.T.); +#337780 = FACE_BOUND('',#337781,.T.); +#337781 = EDGE_LOOP('',(#337782,#337783,#337792,#337800)); +#337782 = ORIENTED_EDGE('',*,*,#337761,.T.); +#337783 = ORIENTED_EDGE('',*,*,#337784,.T.); +#337784 = EDGE_CURVE('',#337754,#337785,#337787,.T.); +#337785 = VERTEX_POINT('',#337786); +#337786 = CARTESIAN_POINT('',(122.3,-83.425,1.55)); +#337787 = CIRCLE('',#337788,0.150000058649); +#337788 = AXIS2_PLACEMENT_3D('',#337789,#337790,#337791); +#337789 = CARTESIAN_POINT('',(122.45000005864,-83.42499994135,1.55)); +#337790 = DIRECTION('',(0.,0.,-1.)); +#337791 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#337792 = ORIENTED_EDGE('',*,*,#337793,.F.); +#337793 = EDGE_CURVE('',#337794,#337785,#337796,.T.); +#337794 = VERTEX_POINT('',#337795); +#337795 = CARTESIAN_POINT('',(122.3,-83.425,1.51)); +#337796 = LINE('',#337797,#337798); +#337797 = CARTESIAN_POINT('',(122.3,-83.425,1.51)); +#337798 = VECTOR('',#337799,1.); +#337799 = DIRECTION('',(0.,0.,1.)); +#337800 = ORIENTED_EDGE('',*,*,#337801,.F.); +#337801 = EDGE_CURVE('',#337762,#337794,#337802,.T.); +#337802 = CIRCLE('',#337803,0.150000058649); +#337803 = AXIS2_PLACEMENT_3D('',#337804,#337805,#337806); +#337804 = CARTESIAN_POINT('',(122.45000005864,-83.42499994135,1.51)); +#337805 = DIRECTION('',(0.,0.,-1.)); +#337806 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#337807 = CYLINDRICAL_SURFACE('',#337808,0.150000058649); +#337808 = AXIS2_PLACEMENT_3D('',#337809,#337810,#337811); +#337809 = CARTESIAN_POINT('',(122.45000005864,-83.42499994135,1.51)); +#337810 = DIRECTION('',(0.,0.,-1.)); +#337811 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#337812 = ADVANCED_FACE('',(#337813),#337829,.T.); +#337813 = FACE_BOUND('',#337814,.T.); +#337814 = EDGE_LOOP('',(#337815,#337816,#337822,#337823)); +#337815 = ORIENTED_EDGE('',*,*,#337793,.T.); +#337816 = ORIENTED_EDGE('',*,*,#337817,.T.); +#337817 = EDGE_CURVE('',#337785,#337585,#337818,.T.); +#337818 = LINE('',#337819,#337820); +#337819 = CARTESIAN_POINT('',(122.3,-83.425,1.55)); +#337820 = VECTOR('',#337821,1.); +#337821 = DIRECTION('',(0.,1.,0.)); +#337822 = ORIENTED_EDGE('',*,*,#337582,.F.); +#337823 = ORIENTED_EDGE('',*,*,#337824,.F.); +#337824 = EDGE_CURVE('',#337794,#337583,#337825,.T.); +#337825 = LINE('',#337826,#337827); +#337826 = CARTESIAN_POINT('',(122.3,-83.425,1.51)); +#337827 = VECTOR('',#337828,1.); +#337828 = DIRECTION('',(0.,1.,0.)); +#337829 = PLANE('',#337830); +#337830 = AXIS2_PLACEMENT_3D('',#337831,#337832,#337833); +#337831 = CARTESIAN_POINT('',(122.3,-83.425,1.51)); +#337832 = DIRECTION('',(-1.,0.,0.)); +#337833 = DIRECTION('',(0.,1.,0.)); +#337834 = ADVANCED_FACE('',(#337835),#337845,.F.); +#337835 = FACE_BOUND('',#337836,.T.); +#337836 = EDGE_LOOP('',(#337837,#337838,#337839,#337840,#337841,#337842, + #337843,#337844)); +#337837 = ORIENTED_EDGE('',*,*,#337609,.T.); +#337838 = ORIENTED_EDGE('',*,*,#337641,.T.); +#337839 = ORIENTED_EDGE('',*,*,#337673,.T.); +#337840 = ORIENTED_EDGE('',*,*,#337705,.T.); +#337841 = ORIENTED_EDGE('',*,*,#337737,.T.); +#337842 = ORIENTED_EDGE('',*,*,#337769,.T.); +#337843 = ORIENTED_EDGE('',*,*,#337801,.T.); +#337844 = ORIENTED_EDGE('',*,*,#337824,.T.); +#337845 = PLANE('',#337846); +#337846 = AXIS2_PLACEMENT_3D('',#337847,#337848,#337849); +#337847 = CARTESIAN_POINT('',(0.,0.,1.51)); +#337848 = DIRECTION('',(0.,0.,1.)); +#337849 = DIRECTION('',(1.,0.,-0.)); +#337850 = ADVANCED_FACE('',(#337851),#337861,.T.); +#337851 = FACE_BOUND('',#337852,.F.); +#337852 = EDGE_LOOP('',(#337853,#337854,#337855,#337856,#337857,#337858, + #337859,#337860)); +#337853 = ORIENTED_EDGE('',*,*,#337592,.T.); +#337854 = ORIENTED_EDGE('',*,*,#337625,.T.); +#337855 = ORIENTED_EDGE('',*,*,#337656,.T.); +#337856 = ORIENTED_EDGE('',*,*,#337689,.T.); +#337857 = ORIENTED_EDGE('',*,*,#337720,.T.); +#337858 = ORIENTED_EDGE('',*,*,#337753,.T.); +#337859 = ORIENTED_EDGE('',*,*,#337784,.T.); +#337860 = ORIENTED_EDGE('',*,*,#337817,.T.); +#337861 = PLANE('',#337862); +#337862 = AXIS2_PLACEMENT_3D('',#337863,#337864,#337865); +#337863 = CARTESIAN_POINT('',(0.,0.,1.55)); +#337864 = DIRECTION('',(0.,0.,1.)); +#337865 = DIRECTION('',(1.,0.,-0.)); +#337866 = MANIFOLD_SOLID_BREP('',#337867); +#337867 = CLOSED_SHELL('',(#337868,#337910,#337941,#337974,#338005, + #338038,#338069,#338102,#338124,#338140)); +#337868 = ADVANCED_FACE('',(#337869),#337905,.T.); +#337869 = FACE_BOUND('',#337870,.F.); +#337870 = EDGE_LOOP('',(#337871,#337881,#337890,#337898)); +#337871 = ORIENTED_EDGE('',*,*,#337872,.T.); +#337872 = EDGE_CURVE('',#337873,#337875,#337877,.T.); +#337873 = VERTEX_POINT('',#337874); +#337874 = CARTESIAN_POINT('',(141.125,-76.175,0.)); +#337875 = VERTEX_POINT('',#337876); +#337876 = CARTESIAN_POINT('',(141.125,-76.175,-4.E-02)); +#337877 = LINE('',#337878,#337879); +#337878 = CARTESIAN_POINT('',(141.125,-76.175,0.)); +#337879 = VECTOR('',#337880,1.); +#337880 = DIRECTION('',(0.,0.,-1.)); +#337881 = ORIENTED_EDGE('',*,*,#337882,.T.); +#337882 = EDGE_CURVE('',#337875,#337883,#337885,.T.); +#337883 = VERTEX_POINT('',#337884); +#337884 = CARTESIAN_POINT('',(141.2125,-76.0875,-4.E-02)); +#337885 = CIRCLE('',#337886,8.74994651821E-02); +#337886 = AXIS2_PLACEMENT_3D('',#337887,#337888,#337889); +#337887 = CARTESIAN_POINT('',(141.21249946518,-76.17499946518,-4.E-02)); +#337888 = DIRECTION('',(0.,0.,-1.)); +#337889 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337890 = ORIENTED_EDGE('',*,*,#337891,.F.); +#337891 = EDGE_CURVE('',#337892,#337883,#337894,.T.); +#337892 = VERTEX_POINT('',#337893); +#337893 = CARTESIAN_POINT('',(141.2125,-76.0875,0.)); +#337894 = LINE('',#337895,#337896); +#337895 = CARTESIAN_POINT('',(141.2125,-76.0875,0.)); +#337896 = VECTOR('',#337897,1.); +#337897 = DIRECTION('',(0.,0.,-1.)); +#337898 = ORIENTED_EDGE('',*,*,#337899,.F.); +#337899 = EDGE_CURVE('',#337873,#337892,#337900,.T.); +#337900 = CIRCLE('',#337901,8.74994651821E-02); +#337901 = AXIS2_PLACEMENT_3D('',#337902,#337903,#337904); +#337902 = CARTESIAN_POINT('',(141.21249946518,-76.17499946518,0.)); +#337903 = DIRECTION('',(0.,0.,-1.)); +#337904 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337905 = CYLINDRICAL_SURFACE('',#337906,8.74994651821E-02); +#337906 = AXIS2_PLACEMENT_3D('',#337907,#337908,#337909); +#337907 = CARTESIAN_POINT('',(141.21249946518,-76.17499946518,0.)); +#337908 = DIRECTION('',(-0.,-0.,1.)); +#337909 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#337910 = ADVANCED_FACE('',(#337911),#337936,.F.); +#337911 = FACE_BOUND('',#337912,.F.); +#337912 = EDGE_LOOP('',(#337913,#337914,#337922,#337930)); +#337913 = ORIENTED_EDGE('',*,*,#337891,.T.); +#337914 = ORIENTED_EDGE('',*,*,#337915,.T.); +#337915 = EDGE_CURVE('',#337883,#337916,#337918,.T.); +#337916 = VERTEX_POINT('',#337917); +#337917 = CARTESIAN_POINT('',(141.3875,-76.0875,-4.E-02)); +#337918 = LINE('',#337919,#337920); +#337919 = CARTESIAN_POINT('',(141.2125,-76.0875,-4.E-02)); +#337920 = VECTOR('',#337921,1.); +#337921 = DIRECTION('',(1.,0.,0.)); +#337922 = ORIENTED_EDGE('',*,*,#337923,.F.); +#337923 = EDGE_CURVE('',#337924,#337916,#337926,.T.); +#337924 = VERTEX_POINT('',#337925); +#337925 = CARTESIAN_POINT('',(141.3875,-76.0875,0.)); +#337926 = LINE('',#337927,#337928); +#337927 = CARTESIAN_POINT('',(141.3875,-76.0875,0.)); +#337928 = VECTOR('',#337929,1.); +#337929 = DIRECTION('',(0.,0.,-1.)); +#337930 = ORIENTED_EDGE('',*,*,#337931,.F.); +#337931 = EDGE_CURVE('',#337892,#337924,#337932,.T.); +#337932 = LINE('',#337933,#337934); +#337933 = CARTESIAN_POINT('',(141.2125,-76.0875,0.)); +#337934 = VECTOR('',#337935,1.); +#337935 = DIRECTION('',(1.,0.,0.)); +#337936 = PLANE('',#337937); +#337937 = AXIS2_PLACEMENT_3D('',#337938,#337939,#337940); +#337938 = CARTESIAN_POINT('',(141.2125,-76.0875,0.)); +#337939 = DIRECTION('',(0.,-1.,0.)); +#337940 = DIRECTION('',(1.,0.,0.)); +#337941 = ADVANCED_FACE('',(#337942),#337969,.T.); +#337942 = FACE_BOUND('',#337943,.F.); +#337943 = EDGE_LOOP('',(#337944,#337945,#337954,#337962)); +#337944 = ORIENTED_EDGE('',*,*,#337923,.T.); +#337945 = ORIENTED_EDGE('',*,*,#337946,.T.); +#337946 = EDGE_CURVE('',#337916,#337947,#337949,.T.); +#337947 = VERTEX_POINT('',#337948); +#337948 = CARTESIAN_POINT('',(141.475,-76.175,-4.E-02)); +#337949 = CIRCLE('',#337950,8.749946518206E-02); +#337950 = AXIS2_PLACEMENT_3D('',#337951,#337952,#337953); +#337951 = CARTESIAN_POINT('',(141.38750053482,-76.17499946518,-4.E-02)); +#337952 = DIRECTION('',(0.,0.,-1.)); +#337953 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337954 = ORIENTED_EDGE('',*,*,#337955,.F.); +#337955 = EDGE_CURVE('',#337956,#337947,#337958,.T.); +#337956 = VERTEX_POINT('',#337957); +#337957 = CARTESIAN_POINT('',(141.475,-76.175,0.)); +#337958 = LINE('',#337959,#337960); +#337959 = CARTESIAN_POINT('',(141.475,-76.175,0.)); +#337960 = VECTOR('',#337961,1.); +#337961 = DIRECTION('',(0.,0.,-1.)); +#337962 = ORIENTED_EDGE('',*,*,#337963,.F.); +#337963 = EDGE_CURVE('',#337924,#337956,#337964,.T.); +#337964 = CIRCLE('',#337965,8.749946518206E-02); +#337965 = AXIS2_PLACEMENT_3D('',#337966,#337967,#337968); +#337966 = CARTESIAN_POINT('',(141.38750053482,-76.17499946518,0.)); +#337967 = DIRECTION('',(0.,0.,-1.)); +#337968 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337969 = CYLINDRICAL_SURFACE('',#337970,8.749946518206E-02); +#337970 = AXIS2_PLACEMENT_3D('',#337971,#337972,#337973); +#337971 = CARTESIAN_POINT('',(141.38750053482,-76.17499946518,0.)); +#337972 = DIRECTION('',(-0.,-0.,1.)); +#337973 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#337974 = ADVANCED_FACE('',(#337975),#338000,.F.); +#337975 = FACE_BOUND('',#337976,.F.); +#337976 = EDGE_LOOP('',(#337977,#337978,#337986,#337994)); +#337977 = ORIENTED_EDGE('',*,*,#337955,.T.); +#337978 = ORIENTED_EDGE('',*,*,#337979,.T.); +#337979 = EDGE_CURVE('',#337947,#337980,#337982,.T.); +#337980 = VERTEX_POINT('',#337981); +#337981 = CARTESIAN_POINT('',(141.475,-76.625,-4.E-02)); +#337982 = LINE('',#337983,#337984); +#337983 = CARTESIAN_POINT('',(141.475,-76.175,-4.E-02)); +#337984 = VECTOR('',#337985,1.); +#337985 = DIRECTION('',(0.,-1.,0.)); +#337986 = ORIENTED_EDGE('',*,*,#337987,.F.); +#337987 = EDGE_CURVE('',#337988,#337980,#337990,.T.); +#337988 = VERTEX_POINT('',#337989); +#337989 = CARTESIAN_POINT('',(141.475,-76.625,0.)); +#337990 = LINE('',#337991,#337992); +#337991 = CARTESIAN_POINT('',(141.475,-76.625,0.)); +#337992 = VECTOR('',#337993,1.); +#337993 = DIRECTION('',(0.,0.,-1.)); +#337994 = ORIENTED_EDGE('',*,*,#337995,.F.); +#337995 = EDGE_CURVE('',#337956,#337988,#337996,.T.); +#337996 = LINE('',#337997,#337998); +#337997 = CARTESIAN_POINT('',(141.475,-76.175,0.)); +#337998 = VECTOR('',#337999,1.); +#337999 = DIRECTION('',(0.,-1.,0.)); +#338000 = PLANE('',#338001); +#338001 = AXIS2_PLACEMENT_3D('',#338002,#338003,#338004); +#338002 = CARTESIAN_POINT('',(141.475,-76.175,0.)); +#338003 = DIRECTION('',(-1.,-0.,-0.)); +#338004 = DIRECTION('',(0.,-1.,0.)); +#338005 = ADVANCED_FACE('',(#338006),#338033,.T.); +#338006 = FACE_BOUND('',#338007,.F.); +#338007 = EDGE_LOOP('',(#338008,#338009,#338018,#338026)); +#338008 = ORIENTED_EDGE('',*,*,#337987,.T.); +#338009 = ORIENTED_EDGE('',*,*,#338010,.T.); +#338010 = EDGE_CURVE('',#337980,#338011,#338013,.T.); +#338011 = VERTEX_POINT('',#338012); +#338012 = CARTESIAN_POINT('',(141.3875,-76.7125,-4.E-02)); +#338013 = CIRCLE('',#338014,8.749946518209E-02); +#338014 = AXIS2_PLACEMENT_3D('',#338015,#338016,#338017); +#338015 = CARTESIAN_POINT('',(141.38750053482,-76.62500053482,-4.E-02)); +#338016 = DIRECTION('',(0.,0.,-1.)); +#338017 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338018 = ORIENTED_EDGE('',*,*,#338019,.F.); +#338019 = EDGE_CURVE('',#338020,#338011,#338022,.T.); +#338020 = VERTEX_POINT('',#338021); +#338021 = CARTESIAN_POINT('',(141.3875,-76.7125,0.)); +#338022 = LINE('',#338023,#338024); +#338023 = CARTESIAN_POINT('',(141.3875,-76.7125,0.)); +#338024 = VECTOR('',#338025,1.); +#338025 = DIRECTION('',(0.,0.,-1.)); +#338026 = ORIENTED_EDGE('',*,*,#338027,.F.); +#338027 = EDGE_CURVE('',#337988,#338020,#338028,.T.); +#338028 = CIRCLE('',#338029,8.749946518209E-02); +#338029 = AXIS2_PLACEMENT_3D('',#338030,#338031,#338032); +#338030 = CARTESIAN_POINT('',(141.38750053482,-76.62500053482,0.)); +#338031 = DIRECTION('',(0.,0.,-1.)); +#338032 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338033 = CYLINDRICAL_SURFACE('',#338034,8.749946518209E-02); +#338034 = AXIS2_PLACEMENT_3D('',#338035,#338036,#338037); +#338035 = CARTESIAN_POINT('',(141.38750053482,-76.62500053482,0.)); +#338036 = DIRECTION('',(-0.,-0.,1.)); +#338037 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338038 = ADVANCED_FACE('',(#338039),#338064,.F.); +#338039 = FACE_BOUND('',#338040,.F.); +#338040 = EDGE_LOOP('',(#338041,#338042,#338050,#338058)); +#338041 = ORIENTED_EDGE('',*,*,#338019,.T.); +#338042 = ORIENTED_EDGE('',*,*,#338043,.T.); +#338043 = EDGE_CURVE('',#338011,#338044,#338046,.T.); +#338044 = VERTEX_POINT('',#338045); +#338045 = CARTESIAN_POINT('',(141.2125,-76.7125,-4.E-02)); +#338046 = LINE('',#338047,#338048); +#338047 = CARTESIAN_POINT('',(141.3875,-76.7125,-4.E-02)); +#338048 = VECTOR('',#338049,1.); +#338049 = DIRECTION('',(-1.,0.,0.)); +#338050 = ORIENTED_EDGE('',*,*,#338051,.F.); +#338051 = EDGE_CURVE('',#338052,#338044,#338054,.T.); +#338052 = VERTEX_POINT('',#338053); +#338053 = CARTESIAN_POINT('',(141.2125,-76.7125,0.)); +#338054 = LINE('',#338055,#338056); +#338055 = CARTESIAN_POINT('',(141.2125,-76.7125,0.)); +#338056 = VECTOR('',#338057,1.); +#338057 = DIRECTION('',(0.,0.,-1.)); +#338058 = ORIENTED_EDGE('',*,*,#338059,.F.); +#338059 = EDGE_CURVE('',#338020,#338052,#338060,.T.); +#338060 = LINE('',#338061,#338062); +#338061 = CARTESIAN_POINT('',(141.3875,-76.7125,0.)); +#338062 = VECTOR('',#338063,1.); +#338063 = DIRECTION('',(-1.,0.,0.)); +#338064 = PLANE('',#338065); +#338065 = AXIS2_PLACEMENT_3D('',#338066,#338067,#338068); +#338066 = CARTESIAN_POINT('',(141.3875,-76.7125,0.)); +#338067 = DIRECTION('',(0.,1.,0.)); +#338068 = DIRECTION('',(-1.,0.,0.)); +#338069 = ADVANCED_FACE('',(#338070),#338097,.T.); +#338070 = FACE_BOUND('',#338071,.F.); +#338071 = EDGE_LOOP('',(#338072,#338073,#338082,#338090)); +#338072 = ORIENTED_EDGE('',*,*,#338051,.T.); +#338073 = ORIENTED_EDGE('',*,*,#338074,.T.); +#338074 = EDGE_CURVE('',#338044,#338075,#338077,.T.); +#338075 = VERTEX_POINT('',#338076); +#338076 = CARTESIAN_POINT('',(141.125,-76.625,-4.E-02)); +#338077 = CIRCLE('',#338078,8.749946518212E-02); +#338078 = AXIS2_PLACEMENT_3D('',#338079,#338080,#338081); +#338079 = CARTESIAN_POINT('',(141.21249946518,-76.62500053482,-4.E-02)); +#338080 = DIRECTION('',(0.,0.,-1.)); +#338081 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338082 = ORIENTED_EDGE('',*,*,#338083,.F.); +#338083 = EDGE_CURVE('',#338084,#338075,#338086,.T.); +#338084 = VERTEX_POINT('',#338085); +#338085 = CARTESIAN_POINT('',(141.125,-76.625,0.)); +#338086 = LINE('',#338087,#338088); +#338087 = CARTESIAN_POINT('',(141.125,-76.625,0.)); +#338088 = VECTOR('',#338089,1.); +#338089 = DIRECTION('',(0.,0.,-1.)); +#338090 = ORIENTED_EDGE('',*,*,#338091,.F.); +#338091 = EDGE_CURVE('',#338052,#338084,#338092,.T.); +#338092 = CIRCLE('',#338093,8.749946518212E-02); +#338093 = AXIS2_PLACEMENT_3D('',#338094,#338095,#338096); +#338094 = CARTESIAN_POINT('',(141.21249946518,-76.62500053482,0.)); +#338095 = DIRECTION('',(0.,0.,-1.)); +#338096 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338097 = CYLINDRICAL_SURFACE('',#338098,8.749946518212E-02); +#338098 = AXIS2_PLACEMENT_3D('',#338099,#338100,#338101); +#338099 = CARTESIAN_POINT('',(141.21249946518,-76.62500053482,0.)); +#338100 = DIRECTION('',(-0.,-0.,1.)); +#338101 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338102 = ADVANCED_FACE('',(#338103),#338119,.F.); +#338103 = FACE_BOUND('',#338104,.F.); +#338104 = EDGE_LOOP('',(#338105,#338106,#338112,#338113)); +#338105 = ORIENTED_EDGE('',*,*,#338083,.T.); +#338106 = ORIENTED_EDGE('',*,*,#338107,.T.); +#338107 = EDGE_CURVE('',#338075,#337875,#338108,.T.); +#338108 = LINE('',#338109,#338110); +#338109 = CARTESIAN_POINT('',(141.125,-76.625,-4.E-02)); +#338110 = VECTOR('',#338111,1.); +#338111 = DIRECTION('',(0.,1.,0.)); +#338112 = ORIENTED_EDGE('',*,*,#337872,.F.); +#338113 = ORIENTED_EDGE('',*,*,#338114,.F.); +#338114 = EDGE_CURVE('',#338084,#337873,#338115,.T.); +#338115 = LINE('',#338116,#338117); +#338116 = CARTESIAN_POINT('',(141.125,-76.625,0.)); +#338117 = VECTOR('',#338118,1.); +#338118 = DIRECTION('',(0.,1.,0.)); +#338119 = PLANE('',#338120); +#338120 = AXIS2_PLACEMENT_3D('',#338121,#338122,#338123); +#338121 = CARTESIAN_POINT('',(141.125,-76.625,0.)); +#338122 = DIRECTION('',(1.,-0.,0.)); +#338123 = DIRECTION('',(0.,1.,0.)); +#338124 = ADVANCED_FACE('',(#338125),#338135,.F.); +#338125 = FACE_BOUND('',#338126,.F.); +#338126 = EDGE_LOOP('',(#338127,#338128,#338129,#338130,#338131,#338132, + #338133,#338134)); +#338127 = ORIENTED_EDGE('',*,*,#337899,.T.); +#338128 = ORIENTED_EDGE('',*,*,#337931,.T.); +#338129 = ORIENTED_EDGE('',*,*,#337963,.T.); +#338130 = ORIENTED_EDGE('',*,*,#337995,.T.); +#338131 = ORIENTED_EDGE('',*,*,#338027,.T.); +#338132 = ORIENTED_EDGE('',*,*,#338059,.T.); +#338133 = ORIENTED_EDGE('',*,*,#338091,.T.); +#338134 = ORIENTED_EDGE('',*,*,#338114,.T.); +#338135 = PLANE('',#338136); +#338136 = AXIS2_PLACEMENT_3D('',#338137,#338138,#338139); +#338137 = CARTESIAN_POINT('',(0.,0.,0.)); +#338138 = DIRECTION('',(-0.,-0.,-1.)); +#338139 = DIRECTION('',(-1.,0.,0.)); +#338140 = ADVANCED_FACE('',(#338141),#338151,.T.); +#338141 = FACE_BOUND('',#338142,.T.); +#338142 = EDGE_LOOP('',(#338143,#338144,#338145,#338146,#338147,#338148, + #338149,#338150)); +#338143 = ORIENTED_EDGE('',*,*,#337882,.T.); +#338144 = ORIENTED_EDGE('',*,*,#337915,.T.); +#338145 = ORIENTED_EDGE('',*,*,#337946,.T.); +#338146 = ORIENTED_EDGE('',*,*,#337979,.T.); +#338147 = ORIENTED_EDGE('',*,*,#338010,.T.); +#338148 = ORIENTED_EDGE('',*,*,#338043,.T.); +#338149 = ORIENTED_EDGE('',*,*,#338074,.T.); +#338150 = ORIENTED_EDGE('',*,*,#338107,.T.); +#338151 = PLANE('',#338152); +#338152 = AXIS2_PLACEMENT_3D('',#338153,#338154,#338155); +#338153 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#338154 = DIRECTION('',(-0.,-0.,-1.)); +#338155 = DIRECTION('',(-1.,0.,0.)); +#338156 = MANIFOLD_SOLID_BREP('',#338157); +#338157 = CLOSED_SHELL('',(#338158,#338198,#338229,#338260,#338282, + #338294)); +#338158 = ADVANCED_FACE('',(#338159),#338193,.T.); +#338159 = FACE_BOUND('',#338160,.T.); +#338160 = EDGE_LOOP('',(#338161,#338171,#338179,#338187)); +#338161 = ORIENTED_EDGE('',*,*,#338162,.T.); +#338162 = EDGE_CURVE('',#338163,#338165,#338167,.T.); +#338163 = VERTEX_POINT('',#338164); +#338164 = CARTESIAN_POINT('',(128.5,-79.07,1.51)); +#338165 = VERTEX_POINT('',#338166); +#338166 = CARTESIAN_POINT('',(128.5,-79.07,1.55)); +#338167 = LINE('',#338168,#338169); +#338168 = CARTESIAN_POINT('',(128.5,-79.07,1.51)); +#338169 = VECTOR('',#338170,1.); +#338170 = DIRECTION('',(0.,0.,1.)); +#338171 = ORIENTED_EDGE('',*,*,#338172,.T.); +#338172 = EDGE_CURVE('',#338165,#338173,#338175,.T.); +#338173 = VERTEX_POINT('',#338174); +#338174 = CARTESIAN_POINT('',(128.5,-78.17,1.55)); +#338175 = LINE('',#338176,#338177); +#338176 = CARTESIAN_POINT('',(128.5,-79.07,1.55)); +#338177 = VECTOR('',#338178,1.); +#338178 = DIRECTION('',(0.,1.,0.)); +#338179 = ORIENTED_EDGE('',*,*,#338180,.F.); +#338180 = EDGE_CURVE('',#338181,#338173,#338183,.T.); +#338181 = VERTEX_POINT('',#338182); +#338182 = CARTESIAN_POINT('',(128.5,-78.17,1.51)); +#338183 = LINE('',#338184,#338185); +#338184 = CARTESIAN_POINT('',(128.5,-78.17,1.51)); +#338185 = VECTOR('',#338186,1.); +#338186 = DIRECTION('',(0.,0.,1.)); +#338187 = ORIENTED_EDGE('',*,*,#338188,.F.); +#338188 = EDGE_CURVE('',#338163,#338181,#338189,.T.); +#338189 = LINE('',#338190,#338191); +#338190 = CARTESIAN_POINT('',(128.5,-79.07,1.51)); +#338191 = VECTOR('',#338192,1.); +#338192 = DIRECTION('',(0.,1.,0.)); +#338193 = PLANE('',#338194); +#338194 = AXIS2_PLACEMENT_3D('',#338195,#338196,#338197); +#338195 = CARTESIAN_POINT('',(128.5,-79.07,1.51)); +#338196 = DIRECTION('',(-1.,0.,0.)); +#338197 = DIRECTION('',(0.,1.,0.)); +#338198 = ADVANCED_FACE('',(#338199),#338224,.T.); +#338199 = FACE_BOUND('',#338200,.T.); +#338200 = EDGE_LOOP('',(#338201,#338202,#338210,#338218)); +#338201 = ORIENTED_EDGE('',*,*,#338180,.T.); +#338202 = ORIENTED_EDGE('',*,*,#338203,.T.); +#338203 = EDGE_CURVE('',#338173,#338204,#338206,.T.); +#338204 = VERTEX_POINT('',#338205); +#338205 = CARTESIAN_POINT('',(130.,-78.17,1.55)); +#338206 = LINE('',#338207,#338208); +#338207 = CARTESIAN_POINT('',(128.5,-78.17,1.55)); +#338208 = VECTOR('',#338209,1.); +#338209 = DIRECTION('',(1.,0.,0.)); +#338210 = ORIENTED_EDGE('',*,*,#338211,.F.); +#338211 = EDGE_CURVE('',#338212,#338204,#338214,.T.); +#338212 = VERTEX_POINT('',#338213); +#338213 = CARTESIAN_POINT('',(130.,-78.17,1.51)); +#338214 = LINE('',#338215,#338216); +#338215 = CARTESIAN_POINT('',(130.,-78.17,1.51)); +#338216 = VECTOR('',#338217,1.); +#338217 = DIRECTION('',(0.,0.,1.)); +#338218 = ORIENTED_EDGE('',*,*,#338219,.F.); +#338219 = EDGE_CURVE('',#338181,#338212,#338220,.T.); +#338220 = LINE('',#338221,#338222); +#338221 = CARTESIAN_POINT('',(128.5,-78.17,1.51)); +#338222 = VECTOR('',#338223,1.); +#338223 = DIRECTION('',(1.,0.,0.)); +#338224 = PLANE('',#338225); +#338225 = AXIS2_PLACEMENT_3D('',#338226,#338227,#338228); +#338226 = CARTESIAN_POINT('',(128.5,-78.17,1.51)); +#338227 = DIRECTION('',(0.,1.,0.)); +#338228 = DIRECTION('',(1.,0.,0.)); +#338229 = ADVANCED_FACE('',(#338230),#338255,.T.); +#338230 = FACE_BOUND('',#338231,.T.); +#338231 = EDGE_LOOP('',(#338232,#338233,#338241,#338249)); +#338232 = ORIENTED_EDGE('',*,*,#338211,.T.); +#338233 = ORIENTED_EDGE('',*,*,#338234,.T.); +#338234 = EDGE_CURVE('',#338204,#338235,#338237,.T.); +#338235 = VERTEX_POINT('',#338236); +#338236 = CARTESIAN_POINT('',(130.,-79.07,1.55)); +#338237 = LINE('',#338238,#338239); +#338238 = CARTESIAN_POINT('',(130.,-78.17,1.55)); +#338239 = VECTOR('',#338240,1.); +#338240 = DIRECTION('',(0.,-1.,0.)); +#338241 = ORIENTED_EDGE('',*,*,#338242,.F.); +#338242 = EDGE_CURVE('',#338243,#338235,#338245,.T.); +#338243 = VERTEX_POINT('',#338244); +#338244 = CARTESIAN_POINT('',(130.,-79.07,1.51)); +#338245 = LINE('',#338246,#338247); +#338246 = CARTESIAN_POINT('',(130.,-79.07,1.51)); +#338247 = VECTOR('',#338248,1.); +#338248 = DIRECTION('',(0.,0.,1.)); +#338249 = ORIENTED_EDGE('',*,*,#338250,.F.); +#338250 = EDGE_CURVE('',#338212,#338243,#338251,.T.); +#338251 = LINE('',#338252,#338253); +#338252 = CARTESIAN_POINT('',(130.,-78.17,1.51)); +#338253 = VECTOR('',#338254,1.); +#338254 = DIRECTION('',(0.,-1.,0.)); +#338255 = PLANE('',#338256); +#338256 = AXIS2_PLACEMENT_3D('',#338257,#338258,#338259); +#338257 = CARTESIAN_POINT('',(130.,-78.17,1.51)); +#338258 = DIRECTION('',(1.,0.,-0.)); +#338259 = DIRECTION('',(0.,-1.,0.)); +#338260 = ADVANCED_FACE('',(#338261),#338277,.T.); +#338261 = FACE_BOUND('',#338262,.T.); +#338262 = EDGE_LOOP('',(#338263,#338264,#338270,#338271)); +#338263 = ORIENTED_EDGE('',*,*,#338242,.T.); +#338264 = ORIENTED_EDGE('',*,*,#338265,.T.); +#338265 = EDGE_CURVE('',#338235,#338165,#338266,.T.); +#338266 = LINE('',#338267,#338268); +#338267 = CARTESIAN_POINT('',(130.,-79.07,1.55)); +#338268 = VECTOR('',#338269,1.); +#338269 = DIRECTION('',(-1.,0.,0.)); +#338270 = ORIENTED_EDGE('',*,*,#338162,.F.); +#338271 = ORIENTED_EDGE('',*,*,#338272,.F.); +#338272 = EDGE_CURVE('',#338243,#338163,#338273,.T.); +#338273 = LINE('',#338274,#338275); +#338274 = CARTESIAN_POINT('',(130.,-79.07,1.51)); +#338275 = VECTOR('',#338276,1.); +#338276 = DIRECTION('',(-1.,0.,0.)); +#338277 = PLANE('',#338278); +#338278 = AXIS2_PLACEMENT_3D('',#338279,#338280,#338281); +#338279 = CARTESIAN_POINT('',(130.,-79.07,1.51)); +#338280 = DIRECTION('',(0.,-1.,0.)); +#338281 = DIRECTION('',(-1.,0.,0.)); +#338282 = ADVANCED_FACE('',(#338283),#338289,.F.); +#338283 = FACE_BOUND('',#338284,.T.); +#338284 = EDGE_LOOP('',(#338285,#338286,#338287,#338288)); +#338285 = ORIENTED_EDGE('',*,*,#338188,.T.); +#338286 = ORIENTED_EDGE('',*,*,#338219,.T.); +#338287 = ORIENTED_EDGE('',*,*,#338250,.T.); +#338288 = ORIENTED_EDGE('',*,*,#338272,.T.); +#338289 = PLANE('',#338290); +#338290 = AXIS2_PLACEMENT_3D('',#338291,#338292,#338293); +#338291 = CARTESIAN_POINT('',(0.,0.,1.51)); +#338292 = DIRECTION('',(0.,0.,1.)); +#338293 = DIRECTION('',(1.,0.,-0.)); +#338294 = ADVANCED_FACE('',(#338295),#338301,.T.); +#338295 = FACE_BOUND('',#338296,.F.); +#338296 = EDGE_LOOP('',(#338297,#338298,#338299,#338300)); +#338297 = ORIENTED_EDGE('',*,*,#338172,.T.); +#338298 = ORIENTED_EDGE('',*,*,#338203,.T.); +#338299 = ORIENTED_EDGE('',*,*,#338234,.T.); +#338300 = ORIENTED_EDGE('',*,*,#338265,.T.); +#338301 = PLANE('',#338302); +#338302 = AXIS2_PLACEMENT_3D('',#338303,#338304,#338305); +#338303 = CARTESIAN_POINT('',(0.,0.,1.55)); +#338304 = DIRECTION('',(0.,0.,1.)); +#338305 = DIRECTION('',(1.,0.,-0.)); +#338306 = MANIFOLD_SOLID_BREP('',#338307); +#338307 = CLOSED_SHELL('',(#338308,#338350,#338381,#338414,#338445, + #338478,#338509,#338542,#338564,#338580)); +#338308 = ADVANCED_FACE('',(#338309),#338345,.T.); +#338309 = FACE_BOUND('',#338310,.T.); +#338310 = EDGE_LOOP('',(#338311,#338321,#338330,#338338)); +#338311 = ORIENTED_EDGE('',*,*,#338312,.T.); +#338312 = EDGE_CURVE('',#338313,#338315,#338317,.T.); +#338313 = VERTEX_POINT('',#338314); +#338314 = CARTESIAN_POINT('',(123.3,-82.175,1.51)); +#338315 = VERTEX_POINT('',#338316); +#338316 = CARTESIAN_POINT('',(123.3,-82.175,1.55)); +#338317 = LINE('',#338318,#338319); +#338318 = CARTESIAN_POINT('',(123.3,-82.175,1.51)); +#338319 = VECTOR('',#338320,1.); +#338320 = DIRECTION('',(0.,0.,1.)); +#338321 = ORIENTED_EDGE('',*,*,#338322,.T.); +#338322 = EDGE_CURVE('',#338315,#338323,#338325,.T.); +#338323 = VERTEX_POINT('',#338324); +#338324 = CARTESIAN_POINT('',(123.45,-82.025,1.55)); +#338325 = CIRCLE('',#338326,0.150000058649); +#338326 = AXIS2_PLACEMENT_3D('',#338327,#338328,#338329); +#338327 = CARTESIAN_POINT('',(123.45000005864,-82.17500005864,1.55)); +#338328 = DIRECTION('',(0.,0.,-1.)); +#338329 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#338330 = ORIENTED_EDGE('',*,*,#338331,.F.); +#338331 = EDGE_CURVE('',#338332,#338323,#338334,.T.); +#338332 = VERTEX_POINT('',#338333); +#338333 = CARTESIAN_POINT('',(123.45,-82.025,1.51)); +#338334 = LINE('',#338335,#338336); +#338335 = CARTESIAN_POINT('',(123.45,-82.025,1.51)); +#338336 = VECTOR('',#338337,1.); +#338337 = DIRECTION('',(0.,0.,1.)); +#338338 = ORIENTED_EDGE('',*,*,#338339,.F.); +#338339 = EDGE_CURVE('',#338313,#338332,#338340,.T.); +#338340 = CIRCLE('',#338341,0.150000058649); +#338341 = AXIS2_PLACEMENT_3D('',#338342,#338343,#338344); +#338342 = CARTESIAN_POINT('',(123.45000005864,-82.17500005864,1.51)); +#338343 = DIRECTION('',(0.,0.,-1.)); +#338344 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#338345 = CYLINDRICAL_SURFACE('',#338346,0.150000058649); +#338346 = AXIS2_PLACEMENT_3D('',#338347,#338348,#338349); +#338347 = CARTESIAN_POINT('',(123.45000005864,-82.17500005864,1.51)); +#338348 = DIRECTION('',(0.,0.,-1.)); +#338349 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#338350 = ADVANCED_FACE('',(#338351),#338376,.T.); +#338351 = FACE_BOUND('',#338352,.T.); +#338352 = EDGE_LOOP('',(#338353,#338354,#338362,#338370)); +#338353 = ORIENTED_EDGE('',*,*,#338331,.T.); +#338354 = ORIENTED_EDGE('',*,*,#338355,.T.); +#338355 = EDGE_CURVE('',#338323,#338356,#338358,.T.); +#338356 = VERTEX_POINT('',#338357); +#338357 = CARTESIAN_POINT('',(123.75,-82.025,1.55)); +#338358 = LINE('',#338359,#338360); +#338359 = CARTESIAN_POINT('',(123.45,-82.025,1.55)); +#338360 = VECTOR('',#338361,1.); +#338361 = DIRECTION('',(1.,0.,0.)); +#338362 = ORIENTED_EDGE('',*,*,#338363,.F.); +#338363 = EDGE_CURVE('',#338364,#338356,#338366,.T.); +#338364 = VERTEX_POINT('',#338365); +#338365 = CARTESIAN_POINT('',(123.75,-82.025,1.51)); +#338366 = LINE('',#338367,#338368); +#338367 = CARTESIAN_POINT('',(123.75,-82.025,1.51)); +#338368 = VECTOR('',#338369,1.); +#338369 = DIRECTION('',(0.,0.,1.)); +#338370 = ORIENTED_EDGE('',*,*,#338371,.F.); +#338371 = EDGE_CURVE('',#338332,#338364,#338372,.T.); +#338372 = LINE('',#338373,#338374); +#338373 = CARTESIAN_POINT('',(123.45,-82.025,1.51)); +#338374 = VECTOR('',#338375,1.); +#338375 = DIRECTION('',(1.,0.,0.)); +#338376 = PLANE('',#338377); +#338377 = AXIS2_PLACEMENT_3D('',#338378,#338379,#338380); +#338378 = CARTESIAN_POINT('',(123.45,-82.025,1.51)); +#338379 = DIRECTION('',(0.,1.,0.)); +#338380 = DIRECTION('',(1.,0.,0.)); +#338381 = ADVANCED_FACE('',(#338382),#338409,.T.); +#338382 = FACE_BOUND('',#338383,.T.); +#338383 = EDGE_LOOP('',(#338384,#338385,#338394,#338402)); +#338384 = ORIENTED_EDGE('',*,*,#338363,.T.); +#338385 = ORIENTED_EDGE('',*,*,#338386,.T.); +#338386 = EDGE_CURVE('',#338356,#338387,#338389,.T.); +#338387 = VERTEX_POINT('',#338388); +#338388 = CARTESIAN_POINT('',(123.9,-82.175,1.55)); +#338389 = CIRCLE('',#338390,0.150000058649); +#338390 = AXIS2_PLACEMENT_3D('',#338391,#338392,#338393); +#338391 = CARTESIAN_POINT('',(123.74999994135,-82.17500005864,1.55)); +#338392 = DIRECTION('',(0.,0.,-1.)); +#338393 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#338394 = ORIENTED_EDGE('',*,*,#338395,.F.); +#338395 = EDGE_CURVE('',#338396,#338387,#338398,.T.); +#338396 = VERTEX_POINT('',#338397); +#338397 = CARTESIAN_POINT('',(123.9,-82.175,1.51)); +#338398 = LINE('',#338399,#338400); +#338399 = CARTESIAN_POINT('',(123.9,-82.175,1.51)); +#338400 = VECTOR('',#338401,1.); +#338401 = DIRECTION('',(0.,0.,1.)); +#338402 = ORIENTED_EDGE('',*,*,#338403,.F.); +#338403 = EDGE_CURVE('',#338364,#338396,#338404,.T.); +#338404 = CIRCLE('',#338405,0.150000058649); +#338405 = AXIS2_PLACEMENT_3D('',#338406,#338407,#338408); +#338406 = CARTESIAN_POINT('',(123.74999994135,-82.17500005864,1.51)); +#338407 = DIRECTION('',(0.,0.,-1.)); +#338408 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#338409 = CYLINDRICAL_SURFACE('',#338410,0.150000058649); +#338410 = AXIS2_PLACEMENT_3D('',#338411,#338412,#338413); +#338411 = CARTESIAN_POINT('',(123.74999994135,-82.17500005864,1.51)); +#338412 = DIRECTION('',(0.,0.,-1.)); +#338413 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#338414 = ADVANCED_FACE('',(#338415),#338440,.T.); +#338415 = FACE_BOUND('',#338416,.T.); +#338416 = EDGE_LOOP('',(#338417,#338418,#338426,#338434)); +#338417 = ORIENTED_EDGE('',*,*,#338395,.T.); +#338418 = ORIENTED_EDGE('',*,*,#338419,.T.); +#338419 = EDGE_CURVE('',#338387,#338420,#338422,.T.); +#338420 = VERTEX_POINT('',#338421); +#338421 = CARTESIAN_POINT('',(123.9,-83.425,1.55)); +#338422 = LINE('',#338423,#338424); +#338423 = CARTESIAN_POINT('',(123.9,-82.175,1.55)); +#338424 = VECTOR('',#338425,1.); +#338425 = DIRECTION('',(0.,-1.,0.)); +#338426 = ORIENTED_EDGE('',*,*,#338427,.F.); +#338427 = EDGE_CURVE('',#338428,#338420,#338430,.T.); +#338428 = VERTEX_POINT('',#338429); +#338429 = CARTESIAN_POINT('',(123.9,-83.425,1.51)); +#338430 = LINE('',#338431,#338432); +#338431 = CARTESIAN_POINT('',(123.9,-83.425,1.51)); +#338432 = VECTOR('',#338433,1.); +#338433 = DIRECTION('',(0.,0.,1.)); +#338434 = ORIENTED_EDGE('',*,*,#338435,.F.); +#338435 = EDGE_CURVE('',#338396,#338428,#338436,.T.); +#338436 = LINE('',#338437,#338438); +#338437 = CARTESIAN_POINT('',(123.9,-82.175,1.51)); +#338438 = VECTOR('',#338439,1.); +#338439 = DIRECTION('',(0.,-1.,0.)); +#338440 = PLANE('',#338441); +#338441 = AXIS2_PLACEMENT_3D('',#338442,#338443,#338444); +#338442 = CARTESIAN_POINT('',(123.9,-82.175,1.51)); +#338443 = DIRECTION('',(1.,0.,-0.)); +#338444 = DIRECTION('',(0.,-1.,0.)); +#338445 = ADVANCED_FACE('',(#338446),#338473,.T.); +#338446 = FACE_BOUND('',#338447,.T.); +#338447 = EDGE_LOOP('',(#338448,#338449,#338458,#338466)); +#338448 = ORIENTED_EDGE('',*,*,#338427,.T.); +#338449 = ORIENTED_EDGE('',*,*,#338450,.T.); +#338450 = EDGE_CURVE('',#338420,#338451,#338453,.T.); +#338451 = VERTEX_POINT('',#338452); +#338452 = CARTESIAN_POINT('',(123.75,-83.575,1.55)); +#338453 = CIRCLE('',#338454,0.150000058649); +#338454 = AXIS2_PLACEMENT_3D('',#338455,#338456,#338457); +#338455 = CARTESIAN_POINT('',(123.74999994135,-83.42499994135,1.55)); +#338456 = DIRECTION('',(0.,0.,-1.)); +#338457 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#338458 = ORIENTED_EDGE('',*,*,#338459,.F.); +#338459 = EDGE_CURVE('',#338460,#338451,#338462,.T.); +#338460 = VERTEX_POINT('',#338461); +#338461 = CARTESIAN_POINT('',(123.75,-83.575,1.51)); +#338462 = LINE('',#338463,#338464); +#338463 = CARTESIAN_POINT('',(123.75,-83.575,1.51)); +#338464 = VECTOR('',#338465,1.); +#338465 = DIRECTION('',(0.,0.,1.)); +#338466 = ORIENTED_EDGE('',*,*,#338467,.F.); +#338467 = EDGE_CURVE('',#338428,#338460,#338468,.T.); +#338468 = CIRCLE('',#338469,0.150000058649); +#338469 = AXIS2_PLACEMENT_3D('',#338470,#338471,#338472); +#338470 = CARTESIAN_POINT('',(123.74999994135,-83.42499994135,1.51)); +#338471 = DIRECTION('',(0.,0.,-1.)); +#338472 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#338473 = CYLINDRICAL_SURFACE('',#338474,0.150000058649); +#338474 = AXIS2_PLACEMENT_3D('',#338475,#338476,#338477); +#338475 = CARTESIAN_POINT('',(123.74999994135,-83.42499994135,1.51)); +#338476 = DIRECTION('',(0.,0.,-1.)); +#338477 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#338478 = ADVANCED_FACE('',(#338479),#338504,.T.); +#338479 = FACE_BOUND('',#338480,.T.); +#338480 = EDGE_LOOP('',(#338481,#338482,#338490,#338498)); +#338481 = ORIENTED_EDGE('',*,*,#338459,.T.); +#338482 = ORIENTED_EDGE('',*,*,#338483,.T.); +#338483 = EDGE_CURVE('',#338451,#338484,#338486,.T.); +#338484 = VERTEX_POINT('',#338485); +#338485 = CARTESIAN_POINT('',(123.45,-83.575,1.55)); +#338486 = LINE('',#338487,#338488); +#338487 = CARTESIAN_POINT('',(123.75,-83.575,1.55)); +#338488 = VECTOR('',#338489,1.); +#338489 = DIRECTION('',(-1.,0.,0.)); +#338490 = ORIENTED_EDGE('',*,*,#338491,.F.); +#338491 = EDGE_CURVE('',#338492,#338484,#338494,.T.); +#338492 = VERTEX_POINT('',#338493); +#338493 = CARTESIAN_POINT('',(123.45,-83.575,1.51)); +#338494 = LINE('',#338495,#338496); +#338495 = CARTESIAN_POINT('',(123.45,-83.575,1.51)); +#338496 = VECTOR('',#338497,1.); +#338497 = DIRECTION('',(0.,0.,1.)); +#338498 = ORIENTED_EDGE('',*,*,#338499,.F.); +#338499 = EDGE_CURVE('',#338460,#338492,#338500,.T.); +#338500 = LINE('',#338501,#338502); +#338501 = CARTESIAN_POINT('',(123.75,-83.575,1.51)); +#338502 = VECTOR('',#338503,1.); +#338503 = DIRECTION('',(-1.,0.,0.)); +#338504 = PLANE('',#338505); +#338505 = AXIS2_PLACEMENT_3D('',#338506,#338507,#338508); +#338506 = CARTESIAN_POINT('',(123.75,-83.575,1.51)); +#338507 = DIRECTION('',(0.,-1.,0.)); +#338508 = DIRECTION('',(-1.,0.,0.)); +#338509 = ADVANCED_FACE('',(#338510),#338537,.T.); +#338510 = FACE_BOUND('',#338511,.T.); +#338511 = EDGE_LOOP('',(#338512,#338513,#338522,#338530)); +#338512 = ORIENTED_EDGE('',*,*,#338491,.T.); +#338513 = ORIENTED_EDGE('',*,*,#338514,.T.); +#338514 = EDGE_CURVE('',#338484,#338515,#338517,.T.); +#338515 = VERTEX_POINT('',#338516); +#338516 = CARTESIAN_POINT('',(123.3,-83.425,1.55)); +#338517 = CIRCLE('',#338518,0.150000058649); +#338518 = AXIS2_PLACEMENT_3D('',#338519,#338520,#338521); +#338519 = CARTESIAN_POINT('',(123.45000005864,-83.42499994135,1.55)); +#338520 = DIRECTION('',(0.,0.,-1.)); +#338521 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#338522 = ORIENTED_EDGE('',*,*,#338523,.F.); +#338523 = EDGE_CURVE('',#338524,#338515,#338526,.T.); +#338524 = VERTEX_POINT('',#338525); +#338525 = CARTESIAN_POINT('',(123.3,-83.425,1.51)); +#338526 = LINE('',#338527,#338528); +#338527 = CARTESIAN_POINT('',(123.3,-83.425,1.51)); +#338528 = VECTOR('',#338529,1.); +#338529 = DIRECTION('',(0.,0.,1.)); +#338530 = ORIENTED_EDGE('',*,*,#338531,.F.); +#338531 = EDGE_CURVE('',#338492,#338524,#338532,.T.); +#338532 = CIRCLE('',#338533,0.150000058649); +#338533 = AXIS2_PLACEMENT_3D('',#338534,#338535,#338536); +#338534 = CARTESIAN_POINT('',(123.45000005864,-83.42499994135,1.51)); +#338535 = DIRECTION('',(0.,0.,-1.)); +#338536 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#338537 = CYLINDRICAL_SURFACE('',#338538,0.150000058649); +#338538 = AXIS2_PLACEMENT_3D('',#338539,#338540,#338541); +#338539 = CARTESIAN_POINT('',(123.45000005864,-83.42499994135,1.51)); +#338540 = DIRECTION('',(0.,0.,-1.)); +#338541 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#338542 = ADVANCED_FACE('',(#338543),#338559,.T.); +#338543 = FACE_BOUND('',#338544,.T.); +#338544 = EDGE_LOOP('',(#338545,#338546,#338552,#338553)); +#338545 = ORIENTED_EDGE('',*,*,#338523,.T.); +#338546 = ORIENTED_EDGE('',*,*,#338547,.T.); +#338547 = EDGE_CURVE('',#338515,#338315,#338548,.T.); +#338548 = LINE('',#338549,#338550); +#338549 = CARTESIAN_POINT('',(123.3,-83.425,1.55)); +#338550 = VECTOR('',#338551,1.); +#338551 = DIRECTION('',(0.,1.,0.)); +#338552 = ORIENTED_EDGE('',*,*,#338312,.F.); +#338553 = ORIENTED_EDGE('',*,*,#338554,.F.); +#338554 = EDGE_CURVE('',#338524,#338313,#338555,.T.); +#338555 = LINE('',#338556,#338557); +#338556 = CARTESIAN_POINT('',(123.3,-83.425,1.51)); +#338557 = VECTOR('',#338558,1.); +#338558 = DIRECTION('',(0.,1.,0.)); +#338559 = PLANE('',#338560); +#338560 = AXIS2_PLACEMENT_3D('',#338561,#338562,#338563); +#338561 = CARTESIAN_POINT('',(123.3,-83.425,1.51)); +#338562 = DIRECTION('',(-1.,0.,0.)); +#338563 = DIRECTION('',(0.,1.,0.)); +#338564 = ADVANCED_FACE('',(#338565),#338575,.F.); +#338565 = FACE_BOUND('',#338566,.T.); +#338566 = EDGE_LOOP('',(#338567,#338568,#338569,#338570,#338571,#338572, + #338573,#338574)); +#338567 = ORIENTED_EDGE('',*,*,#338339,.T.); +#338568 = ORIENTED_EDGE('',*,*,#338371,.T.); +#338569 = ORIENTED_EDGE('',*,*,#338403,.T.); +#338570 = ORIENTED_EDGE('',*,*,#338435,.T.); +#338571 = ORIENTED_EDGE('',*,*,#338467,.T.); +#338572 = ORIENTED_EDGE('',*,*,#338499,.T.); +#338573 = ORIENTED_EDGE('',*,*,#338531,.T.); +#338574 = ORIENTED_EDGE('',*,*,#338554,.T.); +#338575 = PLANE('',#338576); +#338576 = AXIS2_PLACEMENT_3D('',#338577,#338578,#338579); +#338577 = CARTESIAN_POINT('',(0.,0.,1.51)); +#338578 = DIRECTION('',(0.,0.,1.)); +#338579 = DIRECTION('',(1.,0.,-0.)); +#338580 = ADVANCED_FACE('',(#338581),#338591,.T.); +#338581 = FACE_BOUND('',#338582,.F.); +#338582 = EDGE_LOOP('',(#338583,#338584,#338585,#338586,#338587,#338588, + #338589,#338590)); +#338583 = ORIENTED_EDGE('',*,*,#338322,.T.); +#338584 = ORIENTED_EDGE('',*,*,#338355,.T.); +#338585 = ORIENTED_EDGE('',*,*,#338386,.T.); +#338586 = ORIENTED_EDGE('',*,*,#338419,.T.); +#338587 = ORIENTED_EDGE('',*,*,#338450,.T.); +#338588 = ORIENTED_EDGE('',*,*,#338483,.T.); +#338589 = ORIENTED_EDGE('',*,*,#338514,.T.); +#338590 = ORIENTED_EDGE('',*,*,#338547,.T.); +#338591 = PLANE('',#338592); +#338592 = AXIS2_PLACEMENT_3D('',#338593,#338594,#338595); +#338593 = CARTESIAN_POINT('',(0.,0.,1.55)); +#338594 = DIRECTION('',(0.,0.,1.)); +#338595 = DIRECTION('',(1.,0.,-0.)); +#338596 = MANIFOLD_SOLID_BREP('',#338597); +#338597 = CLOSED_SHELL('',(#338598,#338640,#338671,#338704,#338735, + #338768,#338799,#338832,#338854,#338870)); +#338598 = ADVANCED_FACE('',(#338599),#338635,.T.); +#338599 = FACE_BOUND('',#338600,.F.); +#338600 = EDGE_LOOP('',(#338601,#338611,#338620,#338628)); +#338601 = ORIENTED_EDGE('',*,*,#338602,.T.); +#338602 = EDGE_CURVE('',#338603,#338605,#338607,.T.); +#338603 = VERTEX_POINT('',#338604); +#338604 = CARTESIAN_POINT('',(141.625,-76.175,0.)); +#338605 = VERTEX_POINT('',#338606); +#338606 = CARTESIAN_POINT('',(141.625,-76.175,-4.E-02)); +#338607 = LINE('',#338608,#338609); +#338608 = CARTESIAN_POINT('',(141.625,-76.175,0.)); +#338609 = VECTOR('',#338610,1.); +#338610 = DIRECTION('',(0.,0.,-1.)); +#338611 = ORIENTED_EDGE('',*,*,#338612,.T.); +#338612 = EDGE_CURVE('',#338605,#338613,#338615,.T.); +#338613 = VERTEX_POINT('',#338614); +#338614 = CARTESIAN_POINT('',(141.7125,-76.0875,-4.E-02)); +#338615 = CIRCLE('',#338616,8.74994651821E-02); +#338616 = AXIS2_PLACEMENT_3D('',#338617,#338618,#338619); +#338617 = CARTESIAN_POINT('',(141.71249946518,-76.17499946518,-4.E-02)); +#338618 = DIRECTION('',(0.,0.,-1.)); +#338619 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#338620 = ORIENTED_EDGE('',*,*,#338621,.F.); +#338621 = EDGE_CURVE('',#338622,#338613,#338624,.T.); +#338622 = VERTEX_POINT('',#338623); +#338623 = CARTESIAN_POINT('',(141.7125,-76.0875,0.)); +#338624 = LINE('',#338625,#338626); +#338625 = CARTESIAN_POINT('',(141.7125,-76.0875,0.)); +#338626 = VECTOR('',#338627,1.); +#338627 = DIRECTION('',(0.,0.,-1.)); +#338628 = ORIENTED_EDGE('',*,*,#338629,.F.); +#338629 = EDGE_CURVE('',#338603,#338622,#338630,.T.); +#338630 = CIRCLE('',#338631,8.74994651821E-02); +#338631 = AXIS2_PLACEMENT_3D('',#338632,#338633,#338634); +#338632 = CARTESIAN_POINT('',(141.71249946518,-76.17499946518,0.)); +#338633 = DIRECTION('',(0.,0.,-1.)); +#338634 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#338635 = CYLINDRICAL_SURFACE('',#338636,8.74994651821E-02); +#338636 = AXIS2_PLACEMENT_3D('',#338637,#338638,#338639); +#338637 = CARTESIAN_POINT('',(141.71249946518,-76.17499946518,0.)); +#338638 = DIRECTION('',(-0.,-0.,1.)); +#338639 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#338640 = ADVANCED_FACE('',(#338641),#338666,.F.); +#338641 = FACE_BOUND('',#338642,.F.); +#338642 = EDGE_LOOP('',(#338643,#338644,#338652,#338660)); +#338643 = ORIENTED_EDGE('',*,*,#338621,.T.); +#338644 = ORIENTED_EDGE('',*,*,#338645,.T.); +#338645 = EDGE_CURVE('',#338613,#338646,#338648,.T.); +#338646 = VERTEX_POINT('',#338647); +#338647 = CARTESIAN_POINT('',(141.8875,-76.0875,-4.E-02)); +#338648 = LINE('',#338649,#338650); +#338649 = CARTESIAN_POINT('',(141.7125,-76.0875,-4.E-02)); +#338650 = VECTOR('',#338651,1.); +#338651 = DIRECTION('',(1.,0.,0.)); +#338652 = ORIENTED_EDGE('',*,*,#338653,.F.); +#338653 = EDGE_CURVE('',#338654,#338646,#338656,.T.); +#338654 = VERTEX_POINT('',#338655); +#338655 = CARTESIAN_POINT('',(141.8875,-76.0875,0.)); +#338656 = LINE('',#338657,#338658); +#338657 = CARTESIAN_POINT('',(141.8875,-76.0875,0.)); +#338658 = VECTOR('',#338659,1.); +#338659 = DIRECTION('',(0.,0.,-1.)); +#338660 = ORIENTED_EDGE('',*,*,#338661,.F.); +#338661 = EDGE_CURVE('',#338622,#338654,#338662,.T.); +#338662 = LINE('',#338663,#338664); +#338663 = CARTESIAN_POINT('',(141.7125,-76.0875,0.)); +#338664 = VECTOR('',#338665,1.); +#338665 = DIRECTION('',(1.,0.,0.)); +#338666 = PLANE('',#338667); +#338667 = AXIS2_PLACEMENT_3D('',#338668,#338669,#338670); +#338668 = CARTESIAN_POINT('',(141.7125,-76.0875,0.)); +#338669 = DIRECTION('',(0.,-1.,0.)); +#338670 = DIRECTION('',(1.,0.,0.)); +#338671 = ADVANCED_FACE('',(#338672),#338699,.T.); +#338672 = FACE_BOUND('',#338673,.F.); +#338673 = EDGE_LOOP('',(#338674,#338675,#338684,#338692)); +#338674 = ORIENTED_EDGE('',*,*,#338653,.T.); +#338675 = ORIENTED_EDGE('',*,*,#338676,.T.); +#338676 = EDGE_CURVE('',#338646,#338677,#338679,.T.); +#338677 = VERTEX_POINT('',#338678); +#338678 = CARTESIAN_POINT('',(141.975,-76.175,-4.E-02)); +#338679 = CIRCLE('',#338680,8.749946518206E-02); +#338680 = AXIS2_PLACEMENT_3D('',#338681,#338682,#338683); +#338681 = CARTESIAN_POINT('',(141.88750053482,-76.17499946518,-4.E-02)); +#338682 = DIRECTION('',(0.,0.,-1.)); +#338683 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#338684 = ORIENTED_EDGE('',*,*,#338685,.F.); +#338685 = EDGE_CURVE('',#338686,#338677,#338688,.T.); +#338686 = VERTEX_POINT('',#338687); +#338687 = CARTESIAN_POINT('',(141.975,-76.175,0.)); +#338688 = LINE('',#338689,#338690); +#338689 = CARTESIAN_POINT('',(141.975,-76.175,0.)); +#338690 = VECTOR('',#338691,1.); +#338691 = DIRECTION('',(0.,0.,-1.)); +#338692 = ORIENTED_EDGE('',*,*,#338693,.F.); +#338693 = EDGE_CURVE('',#338654,#338686,#338694,.T.); +#338694 = CIRCLE('',#338695,8.749946518206E-02); +#338695 = AXIS2_PLACEMENT_3D('',#338696,#338697,#338698); +#338696 = CARTESIAN_POINT('',(141.88750053482,-76.17499946518,0.)); +#338697 = DIRECTION('',(0.,0.,-1.)); +#338698 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#338699 = CYLINDRICAL_SURFACE('',#338700,8.749946518206E-02); +#338700 = AXIS2_PLACEMENT_3D('',#338701,#338702,#338703); +#338701 = CARTESIAN_POINT('',(141.88750053482,-76.17499946518,0.)); +#338702 = DIRECTION('',(-0.,-0.,1.)); +#338703 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#338704 = ADVANCED_FACE('',(#338705),#338730,.F.); +#338705 = FACE_BOUND('',#338706,.F.); +#338706 = EDGE_LOOP('',(#338707,#338708,#338716,#338724)); +#338707 = ORIENTED_EDGE('',*,*,#338685,.T.); +#338708 = ORIENTED_EDGE('',*,*,#338709,.T.); +#338709 = EDGE_CURVE('',#338677,#338710,#338712,.T.); +#338710 = VERTEX_POINT('',#338711); +#338711 = CARTESIAN_POINT('',(141.975,-76.625,-4.E-02)); +#338712 = LINE('',#338713,#338714); +#338713 = CARTESIAN_POINT('',(141.975,-76.175,-4.E-02)); +#338714 = VECTOR('',#338715,1.); +#338715 = DIRECTION('',(0.,-1.,0.)); +#338716 = ORIENTED_EDGE('',*,*,#338717,.F.); +#338717 = EDGE_CURVE('',#338718,#338710,#338720,.T.); +#338718 = VERTEX_POINT('',#338719); +#338719 = CARTESIAN_POINT('',(141.975,-76.625,0.)); +#338720 = LINE('',#338721,#338722); +#338721 = CARTESIAN_POINT('',(141.975,-76.625,0.)); +#338722 = VECTOR('',#338723,1.); +#338723 = DIRECTION('',(0.,0.,-1.)); +#338724 = ORIENTED_EDGE('',*,*,#338725,.F.); +#338725 = EDGE_CURVE('',#338686,#338718,#338726,.T.); +#338726 = LINE('',#338727,#338728); +#338727 = CARTESIAN_POINT('',(141.975,-76.175,0.)); +#338728 = VECTOR('',#338729,1.); +#338729 = DIRECTION('',(0.,-1.,0.)); +#338730 = PLANE('',#338731); +#338731 = AXIS2_PLACEMENT_3D('',#338732,#338733,#338734); +#338732 = CARTESIAN_POINT('',(141.975,-76.175,0.)); +#338733 = DIRECTION('',(-1.,-0.,-0.)); +#338734 = DIRECTION('',(0.,-1.,0.)); +#338735 = ADVANCED_FACE('',(#338736),#338763,.T.); +#338736 = FACE_BOUND('',#338737,.F.); +#338737 = EDGE_LOOP('',(#338738,#338739,#338748,#338756)); +#338738 = ORIENTED_EDGE('',*,*,#338717,.T.); +#338739 = ORIENTED_EDGE('',*,*,#338740,.T.); +#338740 = EDGE_CURVE('',#338710,#338741,#338743,.T.); +#338741 = VERTEX_POINT('',#338742); +#338742 = CARTESIAN_POINT('',(141.8875,-76.7125,-4.E-02)); +#338743 = CIRCLE('',#338744,8.749946518209E-02); +#338744 = AXIS2_PLACEMENT_3D('',#338745,#338746,#338747); +#338745 = CARTESIAN_POINT('',(141.88750053482,-76.62500053482,-4.E-02)); +#338746 = DIRECTION('',(0.,0.,-1.)); +#338747 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338748 = ORIENTED_EDGE('',*,*,#338749,.F.); +#338749 = EDGE_CURVE('',#338750,#338741,#338752,.T.); +#338750 = VERTEX_POINT('',#338751); +#338751 = CARTESIAN_POINT('',(141.8875,-76.7125,0.)); +#338752 = LINE('',#338753,#338754); +#338753 = CARTESIAN_POINT('',(141.8875,-76.7125,0.)); +#338754 = VECTOR('',#338755,1.); +#338755 = DIRECTION('',(0.,0.,-1.)); +#338756 = ORIENTED_EDGE('',*,*,#338757,.F.); +#338757 = EDGE_CURVE('',#338718,#338750,#338758,.T.); +#338758 = CIRCLE('',#338759,8.749946518209E-02); +#338759 = AXIS2_PLACEMENT_3D('',#338760,#338761,#338762); +#338760 = CARTESIAN_POINT('',(141.88750053482,-76.62500053482,0.)); +#338761 = DIRECTION('',(0.,0.,-1.)); +#338762 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338763 = CYLINDRICAL_SURFACE('',#338764,8.749946518209E-02); +#338764 = AXIS2_PLACEMENT_3D('',#338765,#338766,#338767); +#338765 = CARTESIAN_POINT('',(141.88750053482,-76.62500053482,0.)); +#338766 = DIRECTION('',(-0.,-0.,1.)); +#338767 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#338768 = ADVANCED_FACE('',(#338769),#338794,.F.); +#338769 = FACE_BOUND('',#338770,.F.); +#338770 = EDGE_LOOP('',(#338771,#338772,#338780,#338788)); +#338771 = ORIENTED_EDGE('',*,*,#338749,.T.); +#338772 = ORIENTED_EDGE('',*,*,#338773,.T.); +#338773 = EDGE_CURVE('',#338741,#338774,#338776,.T.); +#338774 = VERTEX_POINT('',#338775); +#338775 = CARTESIAN_POINT('',(141.7125,-76.7125,-4.E-02)); +#338776 = LINE('',#338777,#338778); +#338777 = CARTESIAN_POINT('',(141.8875,-76.7125,-4.E-02)); +#338778 = VECTOR('',#338779,1.); +#338779 = DIRECTION('',(-1.,0.,0.)); +#338780 = ORIENTED_EDGE('',*,*,#338781,.F.); +#338781 = EDGE_CURVE('',#338782,#338774,#338784,.T.); +#338782 = VERTEX_POINT('',#338783); +#338783 = CARTESIAN_POINT('',(141.7125,-76.7125,0.)); +#338784 = LINE('',#338785,#338786); +#338785 = CARTESIAN_POINT('',(141.7125,-76.7125,0.)); +#338786 = VECTOR('',#338787,1.); +#338787 = DIRECTION('',(0.,0.,-1.)); +#338788 = ORIENTED_EDGE('',*,*,#338789,.F.); +#338789 = EDGE_CURVE('',#338750,#338782,#338790,.T.); +#338790 = LINE('',#338791,#338792); +#338791 = CARTESIAN_POINT('',(141.8875,-76.7125,0.)); +#338792 = VECTOR('',#338793,1.); +#338793 = DIRECTION('',(-1.,0.,0.)); +#338794 = PLANE('',#338795); +#338795 = AXIS2_PLACEMENT_3D('',#338796,#338797,#338798); +#338796 = CARTESIAN_POINT('',(141.8875,-76.7125,0.)); +#338797 = DIRECTION('',(0.,1.,0.)); +#338798 = DIRECTION('',(-1.,0.,0.)); +#338799 = ADVANCED_FACE('',(#338800),#338827,.T.); +#338800 = FACE_BOUND('',#338801,.F.); +#338801 = EDGE_LOOP('',(#338802,#338803,#338812,#338820)); +#338802 = ORIENTED_EDGE('',*,*,#338781,.T.); +#338803 = ORIENTED_EDGE('',*,*,#338804,.T.); +#338804 = EDGE_CURVE('',#338774,#338805,#338807,.T.); +#338805 = VERTEX_POINT('',#338806); +#338806 = CARTESIAN_POINT('',(141.625,-76.625,-4.E-02)); +#338807 = CIRCLE('',#338808,8.749946518212E-02); +#338808 = AXIS2_PLACEMENT_3D('',#338809,#338810,#338811); +#338809 = CARTESIAN_POINT('',(141.71249946518,-76.62500053482,-4.E-02)); +#338810 = DIRECTION('',(0.,0.,-1.)); +#338811 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338812 = ORIENTED_EDGE('',*,*,#338813,.F.); +#338813 = EDGE_CURVE('',#338814,#338805,#338816,.T.); +#338814 = VERTEX_POINT('',#338815); +#338815 = CARTESIAN_POINT('',(141.625,-76.625,0.)); +#338816 = LINE('',#338817,#338818); +#338817 = CARTESIAN_POINT('',(141.625,-76.625,0.)); +#338818 = VECTOR('',#338819,1.); +#338819 = DIRECTION('',(0.,0.,-1.)); +#338820 = ORIENTED_EDGE('',*,*,#338821,.F.); +#338821 = EDGE_CURVE('',#338782,#338814,#338822,.T.); +#338822 = CIRCLE('',#338823,8.749946518212E-02); +#338823 = AXIS2_PLACEMENT_3D('',#338824,#338825,#338826); +#338824 = CARTESIAN_POINT('',(141.71249946518,-76.62500053482,0.)); +#338825 = DIRECTION('',(0.,0.,-1.)); +#338826 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338827 = CYLINDRICAL_SURFACE('',#338828,8.749946518212E-02); +#338828 = AXIS2_PLACEMENT_3D('',#338829,#338830,#338831); +#338829 = CARTESIAN_POINT('',(141.71249946518,-76.62500053482,0.)); +#338830 = DIRECTION('',(-0.,-0.,1.)); +#338831 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#338832 = ADVANCED_FACE('',(#338833),#338849,.F.); +#338833 = FACE_BOUND('',#338834,.F.); +#338834 = EDGE_LOOP('',(#338835,#338836,#338842,#338843)); +#338835 = ORIENTED_EDGE('',*,*,#338813,.T.); +#338836 = ORIENTED_EDGE('',*,*,#338837,.T.); +#338837 = EDGE_CURVE('',#338805,#338605,#338838,.T.); +#338838 = LINE('',#338839,#338840); +#338839 = CARTESIAN_POINT('',(141.625,-76.625,-4.E-02)); +#338840 = VECTOR('',#338841,1.); +#338841 = DIRECTION('',(0.,1.,0.)); +#338842 = ORIENTED_EDGE('',*,*,#338602,.F.); +#338843 = ORIENTED_EDGE('',*,*,#338844,.F.); +#338844 = EDGE_CURVE('',#338814,#338603,#338845,.T.); +#338845 = LINE('',#338846,#338847); +#338846 = CARTESIAN_POINT('',(141.625,-76.625,0.)); +#338847 = VECTOR('',#338848,1.); +#338848 = DIRECTION('',(0.,1.,0.)); +#338849 = PLANE('',#338850); +#338850 = AXIS2_PLACEMENT_3D('',#338851,#338852,#338853); +#338851 = CARTESIAN_POINT('',(141.625,-76.625,0.)); +#338852 = DIRECTION('',(1.,-0.,0.)); +#338853 = DIRECTION('',(0.,1.,0.)); +#338854 = ADVANCED_FACE('',(#338855),#338865,.F.); +#338855 = FACE_BOUND('',#338856,.F.); +#338856 = EDGE_LOOP('',(#338857,#338858,#338859,#338860,#338861,#338862, + #338863,#338864)); +#338857 = ORIENTED_EDGE('',*,*,#338629,.T.); +#338858 = ORIENTED_EDGE('',*,*,#338661,.T.); +#338859 = ORIENTED_EDGE('',*,*,#338693,.T.); +#338860 = ORIENTED_EDGE('',*,*,#338725,.T.); +#338861 = ORIENTED_EDGE('',*,*,#338757,.T.); +#338862 = ORIENTED_EDGE('',*,*,#338789,.T.); +#338863 = ORIENTED_EDGE('',*,*,#338821,.T.); +#338864 = ORIENTED_EDGE('',*,*,#338844,.T.); +#338865 = PLANE('',#338866); +#338866 = AXIS2_PLACEMENT_3D('',#338867,#338868,#338869); +#338867 = CARTESIAN_POINT('',(0.,0.,0.)); +#338868 = DIRECTION('',(-0.,-0.,-1.)); +#338869 = DIRECTION('',(-1.,0.,0.)); +#338870 = ADVANCED_FACE('',(#338871),#338881,.T.); +#338871 = FACE_BOUND('',#338872,.T.); +#338872 = EDGE_LOOP('',(#338873,#338874,#338875,#338876,#338877,#338878, + #338879,#338880)); +#338873 = ORIENTED_EDGE('',*,*,#338612,.T.); +#338874 = ORIENTED_EDGE('',*,*,#338645,.T.); +#338875 = ORIENTED_EDGE('',*,*,#338676,.T.); +#338876 = ORIENTED_EDGE('',*,*,#338709,.T.); +#338877 = ORIENTED_EDGE('',*,*,#338740,.T.); +#338878 = ORIENTED_EDGE('',*,*,#338773,.T.); +#338879 = ORIENTED_EDGE('',*,*,#338804,.T.); +#338880 = ORIENTED_EDGE('',*,*,#338837,.T.); +#338881 = PLANE('',#338882); +#338882 = AXIS2_PLACEMENT_3D('',#338883,#338884,#338885); +#338883 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#338884 = DIRECTION('',(-0.,-0.,-1.)); +#338885 = DIRECTION('',(-1.,0.,0.)); +#338886 = MANIFOLD_SOLID_BREP('',#338887); +#338887 = CLOSED_SHELL('',(#338888,#338928,#338959,#338990,#339012, + #339024)); +#338888 = ADVANCED_FACE('',(#338889),#338923,.T.); +#338889 = FACE_BOUND('',#338890,.T.); +#338890 = EDGE_LOOP('',(#338891,#338901,#338909,#338917)); +#338891 = ORIENTED_EDGE('',*,*,#338892,.T.); +#338892 = EDGE_CURVE('',#338893,#338895,#338897,.T.); +#338893 = VERTEX_POINT('',#338894); +#338894 = CARTESIAN_POINT('',(141.995,-83.16,1.51)); +#338895 = VERTEX_POINT('',#338896); +#338896 = CARTESIAN_POINT('',(141.995,-83.16,1.55)); +#338897 = LINE('',#338898,#338899); +#338898 = CARTESIAN_POINT('',(141.995,-83.16,1.51)); +#338899 = VECTOR('',#338900,1.); +#338900 = DIRECTION('',(0.,0.,1.)); +#338901 = ORIENTED_EDGE('',*,*,#338902,.T.); +#338902 = EDGE_CURVE('',#338895,#338903,#338905,.T.); +#338903 = VERTEX_POINT('',#338904); +#338904 = CARTESIAN_POINT('',(141.995,-81.66,1.55)); +#338905 = LINE('',#338906,#338907); +#338906 = CARTESIAN_POINT('',(141.995,-83.16,1.55)); +#338907 = VECTOR('',#338908,1.); +#338908 = DIRECTION('',(0.,1.,0.)); +#338909 = ORIENTED_EDGE('',*,*,#338910,.F.); +#338910 = EDGE_CURVE('',#338911,#338903,#338913,.T.); +#338911 = VERTEX_POINT('',#338912); +#338912 = CARTESIAN_POINT('',(141.995,-81.66,1.51)); +#338913 = LINE('',#338914,#338915); +#338914 = CARTESIAN_POINT('',(141.995,-81.66,1.51)); +#338915 = VECTOR('',#338916,1.); +#338916 = DIRECTION('',(0.,0.,1.)); +#338917 = ORIENTED_EDGE('',*,*,#338918,.F.); +#338918 = EDGE_CURVE('',#338893,#338911,#338919,.T.); +#338919 = LINE('',#338920,#338921); +#338920 = CARTESIAN_POINT('',(141.995,-83.16,1.51)); +#338921 = VECTOR('',#338922,1.); +#338922 = DIRECTION('',(0.,1.,0.)); +#338923 = PLANE('',#338924); +#338924 = AXIS2_PLACEMENT_3D('',#338925,#338926,#338927); +#338925 = CARTESIAN_POINT('',(141.995,-83.16,1.51)); +#338926 = DIRECTION('',(-1.,0.,0.)); +#338927 = DIRECTION('',(0.,1.,0.)); +#338928 = ADVANCED_FACE('',(#338929),#338954,.T.); +#338929 = FACE_BOUND('',#338930,.T.); +#338930 = EDGE_LOOP('',(#338931,#338932,#338940,#338948)); +#338931 = ORIENTED_EDGE('',*,*,#338910,.T.); +#338932 = ORIENTED_EDGE('',*,*,#338933,.T.); +#338933 = EDGE_CURVE('',#338903,#338934,#338936,.T.); +#338934 = VERTEX_POINT('',#338935); +#338935 = CARTESIAN_POINT('',(142.895,-81.66,1.55)); +#338936 = LINE('',#338937,#338938); +#338937 = CARTESIAN_POINT('',(141.995,-81.66,1.55)); +#338938 = VECTOR('',#338939,1.); +#338939 = DIRECTION('',(1.,0.,0.)); +#338940 = ORIENTED_EDGE('',*,*,#338941,.F.); +#338941 = EDGE_CURVE('',#338942,#338934,#338944,.T.); +#338942 = VERTEX_POINT('',#338943); +#338943 = CARTESIAN_POINT('',(142.895,-81.66,1.51)); +#338944 = LINE('',#338945,#338946); +#338945 = CARTESIAN_POINT('',(142.895,-81.66,1.51)); +#338946 = VECTOR('',#338947,1.); +#338947 = DIRECTION('',(0.,0.,1.)); +#338948 = ORIENTED_EDGE('',*,*,#338949,.F.); +#338949 = EDGE_CURVE('',#338911,#338942,#338950,.T.); +#338950 = LINE('',#338951,#338952); +#338951 = CARTESIAN_POINT('',(141.995,-81.66,1.51)); +#338952 = VECTOR('',#338953,1.); +#338953 = DIRECTION('',(1.,0.,0.)); +#338954 = PLANE('',#338955); +#338955 = AXIS2_PLACEMENT_3D('',#338956,#338957,#338958); +#338956 = CARTESIAN_POINT('',(141.995,-81.66,1.51)); +#338957 = DIRECTION('',(0.,1.,0.)); +#338958 = DIRECTION('',(1.,0.,0.)); +#338959 = ADVANCED_FACE('',(#338960),#338985,.T.); +#338960 = FACE_BOUND('',#338961,.T.); +#338961 = EDGE_LOOP('',(#338962,#338963,#338971,#338979)); +#338962 = ORIENTED_EDGE('',*,*,#338941,.T.); +#338963 = ORIENTED_EDGE('',*,*,#338964,.T.); +#338964 = EDGE_CURVE('',#338934,#338965,#338967,.T.); +#338965 = VERTEX_POINT('',#338966); +#338966 = CARTESIAN_POINT('',(142.895,-83.16,1.55)); +#338967 = LINE('',#338968,#338969); +#338968 = CARTESIAN_POINT('',(142.895,-81.66,1.55)); +#338969 = VECTOR('',#338970,1.); +#338970 = DIRECTION('',(0.,-1.,0.)); +#338971 = ORIENTED_EDGE('',*,*,#338972,.F.); +#338972 = EDGE_CURVE('',#338973,#338965,#338975,.T.); +#338973 = VERTEX_POINT('',#338974); +#338974 = CARTESIAN_POINT('',(142.895,-83.16,1.51)); +#338975 = LINE('',#338976,#338977); +#338976 = CARTESIAN_POINT('',(142.895,-83.16,1.51)); +#338977 = VECTOR('',#338978,1.); +#338978 = DIRECTION('',(0.,0.,1.)); +#338979 = ORIENTED_EDGE('',*,*,#338980,.F.); +#338980 = EDGE_CURVE('',#338942,#338973,#338981,.T.); +#338981 = LINE('',#338982,#338983); +#338982 = CARTESIAN_POINT('',(142.895,-81.66,1.51)); +#338983 = VECTOR('',#338984,1.); +#338984 = DIRECTION('',(0.,-1.,0.)); +#338985 = PLANE('',#338986); +#338986 = AXIS2_PLACEMENT_3D('',#338987,#338988,#338989); +#338987 = CARTESIAN_POINT('',(142.895,-81.66,1.51)); +#338988 = DIRECTION('',(1.,0.,-0.)); +#338989 = DIRECTION('',(0.,-1.,0.)); +#338990 = ADVANCED_FACE('',(#338991),#339007,.T.); +#338991 = FACE_BOUND('',#338992,.T.); +#338992 = EDGE_LOOP('',(#338993,#338994,#339000,#339001)); +#338993 = ORIENTED_EDGE('',*,*,#338972,.T.); +#338994 = ORIENTED_EDGE('',*,*,#338995,.T.); +#338995 = EDGE_CURVE('',#338965,#338895,#338996,.T.); +#338996 = LINE('',#338997,#338998); +#338997 = CARTESIAN_POINT('',(142.895,-83.16,1.55)); +#338998 = VECTOR('',#338999,1.); +#338999 = DIRECTION('',(-1.,0.,0.)); +#339000 = ORIENTED_EDGE('',*,*,#338892,.F.); +#339001 = ORIENTED_EDGE('',*,*,#339002,.F.); +#339002 = EDGE_CURVE('',#338973,#338893,#339003,.T.); +#339003 = LINE('',#339004,#339005); +#339004 = CARTESIAN_POINT('',(142.895,-83.16,1.51)); +#339005 = VECTOR('',#339006,1.); +#339006 = DIRECTION('',(-1.,0.,0.)); +#339007 = PLANE('',#339008); +#339008 = AXIS2_PLACEMENT_3D('',#339009,#339010,#339011); +#339009 = CARTESIAN_POINT('',(142.895,-83.16,1.51)); +#339010 = DIRECTION('',(0.,-1.,0.)); +#339011 = DIRECTION('',(-1.,0.,0.)); +#339012 = ADVANCED_FACE('',(#339013),#339019,.F.); +#339013 = FACE_BOUND('',#339014,.T.); +#339014 = EDGE_LOOP('',(#339015,#339016,#339017,#339018)); +#339015 = ORIENTED_EDGE('',*,*,#338918,.T.); +#339016 = ORIENTED_EDGE('',*,*,#338949,.T.); +#339017 = ORIENTED_EDGE('',*,*,#338980,.T.); +#339018 = ORIENTED_EDGE('',*,*,#339002,.T.); +#339019 = PLANE('',#339020); +#339020 = AXIS2_PLACEMENT_3D('',#339021,#339022,#339023); +#339021 = CARTESIAN_POINT('',(0.,0.,1.51)); +#339022 = DIRECTION('',(0.,0.,1.)); +#339023 = DIRECTION('',(1.,0.,-0.)); +#339024 = ADVANCED_FACE('',(#339025),#339031,.T.); +#339025 = FACE_BOUND('',#339026,.F.); +#339026 = EDGE_LOOP('',(#339027,#339028,#339029,#339030)); +#339027 = ORIENTED_EDGE('',*,*,#338902,.T.); +#339028 = ORIENTED_EDGE('',*,*,#338933,.T.); +#339029 = ORIENTED_EDGE('',*,*,#338964,.T.); +#339030 = ORIENTED_EDGE('',*,*,#338995,.T.); +#339031 = PLANE('',#339032); +#339032 = AXIS2_PLACEMENT_3D('',#339033,#339034,#339035); +#339033 = CARTESIAN_POINT('',(0.,0.,1.55)); +#339034 = DIRECTION('',(0.,0.,1.)); +#339035 = DIRECTION('',(1.,0.,-0.)); +#339036 = MANIFOLD_SOLID_BREP('',#339037); +#339037 = CLOSED_SHELL('',(#339038,#339080,#339111,#339144,#339175, + #339208,#339239,#339272,#339294,#339310)); +#339038 = ADVANCED_FACE('',(#339039),#339075,.T.); +#339039 = FACE_BOUND('',#339040,.T.); +#339040 = EDGE_LOOP('',(#339041,#339051,#339060,#339068)); +#339041 = ORIENTED_EDGE('',*,*,#339042,.T.); +#339042 = EDGE_CURVE('',#339043,#339045,#339047,.T.); +#339043 = VERTEX_POINT('',#339044); +#339044 = CARTESIAN_POINT('',(123.25,-112.,1.51)); +#339045 = VERTEX_POINT('',#339046); +#339046 = CARTESIAN_POINT('',(123.25,-112.,1.55)); +#339047 = LINE('',#339048,#339049); +#339048 = CARTESIAN_POINT('',(123.25,-112.,1.51)); +#339049 = VECTOR('',#339050,1.); +#339050 = DIRECTION('',(0.,0.,1.)); +#339051 = ORIENTED_EDGE('',*,*,#339052,.T.); +#339052 = EDGE_CURVE('',#339045,#339053,#339055,.T.); +#339053 = VERTEX_POINT('',#339054); +#339054 = CARTESIAN_POINT('',(123.75,-111.5,1.55)); +#339055 = CIRCLE('',#339056,0.500001333575); +#339056 = AXIS2_PLACEMENT_3D('',#339057,#339058,#339059); +#339057 = CARTESIAN_POINT('',(123.75000133357,-112.0000013335,1.55)); +#339058 = DIRECTION('',(0.,0.,-1.)); +#339059 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339060 = ORIENTED_EDGE('',*,*,#339061,.F.); +#339061 = EDGE_CURVE('',#339062,#339053,#339064,.T.); +#339062 = VERTEX_POINT('',#339063); +#339063 = CARTESIAN_POINT('',(123.75,-111.5,1.51)); +#339064 = LINE('',#339065,#339066); +#339065 = CARTESIAN_POINT('',(123.75,-111.5,1.51)); +#339066 = VECTOR('',#339067,1.); +#339067 = DIRECTION('',(0.,0.,1.)); +#339068 = ORIENTED_EDGE('',*,*,#339069,.F.); +#339069 = EDGE_CURVE('',#339043,#339062,#339070,.T.); +#339070 = CIRCLE('',#339071,0.500001333575); +#339071 = AXIS2_PLACEMENT_3D('',#339072,#339073,#339074); +#339072 = CARTESIAN_POINT('',(123.75000133357,-112.0000013335,1.51)); +#339073 = DIRECTION('',(0.,0.,-1.)); +#339074 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339075 = CYLINDRICAL_SURFACE('',#339076,0.500001333575); +#339076 = AXIS2_PLACEMENT_3D('',#339077,#339078,#339079); +#339077 = CARTESIAN_POINT('',(123.75000133357,-112.0000013335,1.51)); +#339078 = DIRECTION('',(0.,0.,-1.)); +#339079 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339080 = ADVANCED_FACE('',(#339081),#339106,.T.); +#339081 = FACE_BOUND('',#339082,.T.); +#339082 = EDGE_LOOP('',(#339083,#339084,#339092,#339100)); +#339083 = ORIENTED_EDGE('',*,*,#339061,.T.); +#339084 = ORIENTED_EDGE('',*,*,#339085,.T.); +#339085 = EDGE_CURVE('',#339053,#339086,#339088,.T.); +#339086 = VERTEX_POINT('',#339087); +#339087 = CARTESIAN_POINT('',(124.75,-111.5,1.55)); +#339088 = LINE('',#339089,#339090); +#339089 = CARTESIAN_POINT('',(123.75,-111.5,1.55)); +#339090 = VECTOR('',#339091,1.); +#339091 = DIRECTION('',(1.,0.,0.)); +#339092 = ORIENTED_EDGE('',*,*,#339093,.F.); +#339093 = EDGE_CURVE('',#339094,#339086,#339096,.T.); +#339094 = VERTEX_POINT('',#339095); +#339095 = CARTESIAN_POINT('',(124.75,-111.5,1.51)); +#339096 = LINE('',#339097,#339098); +#339097 = CARTESIAN_POINT('',(124.75,-111.5,1.51)); +#339098 = VECTOR('',#339099,1.); +#339099 = DIRECTION('',(0.,0.,1.)); +#339100 = ORIENTED_EDGE('',*,*,#339101,.F.); +#339101 = EDGE_CURVE('',#339062,#339094,#339102,.T.); +#339102 = LINE('',#339103,#339104); +#339103 = CARTESIAN_POINT('',(123.75,-111.5,1.51)); +#339104 = VECTOR('',#339105,1.); +#339105 = DIRECTION('',(1.,0.,0.)); +#339106 = PLANE('',#339107); +#339107 = AXIS2_PLACEMENT_3D('',#339108,#339109,#339110); +#339108 = CARTESIAN_POINT('',(123.75,-111.5,1.51)); +#339109 = DIRECTION('',(0.,1.,0.)); +#339110 = DIRECTION('',(1.,0.,0.)); +#339111 = ADVANCED_FACE('',(#339112),#339139,.T.); +#339112 = FACE_BOUND('',#339113,.T.); +#339113 = EDGE_LOOP('',(#339114,#339115,#339124,#339132)); +#339114 = ORIENTED_EDGE('',*,*,#339093,.T.); +#339115 = ORIENTED_EDGE('',*,*,#339116,.T.); +#339116 = EDGE_CURVE('',#339086,#339117,#339119,.T.); +#339117 = VERTEX_POINT('',#339118); +#339118 = CARTESIAN_POINT('',(125.25,-112.,1.55)); +#339119 = CIRCLE('',#339120,0.500001333575); +#339120 = AXIS2_PLACEMENT_3D('',#339121,#339122,#339123); +#339121 = CARTESIAN_POINT('',(124.74999866642,-112.0000013335,1.55)); +#339122 = DIRECTION('',(0.,0.,-1.)); +#339123 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339124 = ORIENTED_EDGE('',*,*,#339125,.F.); +#339125 = EDGE_CURVE('',#339126,#339117,#339128,.T.); +#339126 = VERTEX_POINT('',#339127); +#339127 = CARTESIAN_POINT('',(125.25,-112.,1.51)); +#339128 = LINE('',#339129,#339130); +#339129 = CARTESIAN_POINT('',(125.25,-112.,1.51)); +#339130 = VECTOR('',#339131,1.); +#339131 = DIRECTION('',(0.,0.,1.)); +#339132 = ORIENTED_EDGE('',*,*,#339133,.F.); +#339133 = EDGE_CURVE('',#339094,#339126,#339134,.T.); +#339134 = CIRCLE('',#339135,0.500001333575); +#339135 = AXIS2_PLACEMENT_3D('',#339136,#339137,#339138); +#339136 = CARTESIAN_POINT('',(124.74999866642,-112.0000013335,1.51)); +#339137 = DIRECTION('',(0.,0.,-1.)); +#339138 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339139 = CYLINDRICAL_SURFACE('',#339140,0.500001333575); +#339140 = AXIS2_PLACEMENT_3D('',#339141,#339142,#339143); +#339141 = CARTESIAN_POINT('',(124.74999866642,-112.0000013335,1.51)); +#339142 = DIRECTION('',(0.,0.,-1.)); +#339143 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339144 = ADVANCED_FACE('',(#339145),#339170,.T.); +#339145 = FACE_BOUND('',#339146,.T.); +#339146 = EDGE_LOOP('',(#339147,#339148,#339156,#339164)); +#339147 = ORIENTED_EDGE('',*,*,#339125,.T.); +#339148 = ORIENTED_EDGE('',*,*,#339149,.T.); +#339149 = EDGE_CURVE('',#339117,#339150,#339152,.T.); +#339150 = VERTEX_POINT('',#339151); +#339151 = CARTESIAN_POINT('',(125.25,-113.,1.55)); +#339152 = LINE('',#339153,#339154); +#339153 = CARTESIAN_POINT('',(125.25,-112.,1.55)); +#339154 = VECTOR('',#339155,1.); +#339155 = DIRECTION('',(0.,-1.,0.)); +#339156 = ORIENTED_EDGE('',*,*,#339157,.F.); +#339157 = EDGE_CURVE('',#339158,#339150,#339160,.T.); +#339158 = VERTEX_POINT('',#339159); +#339159 = CARTESIAN_POINT('',(125.25,-113.,1.51)); +#339160 = LINE('',#339161,#339162); +#339161 = CARTESIAN_POINT('',(125.25,-113.,1.51)); +#339162 = VECTOR('',#339163,1.); +#339163 = DIRECTION('',(0.,0.,1.)); +#339164 = ORIENTED_EDGE('',*,*,#339165,.F.); +#339165 = EDGE_CURVE('',#339126,#339158,#339166,.T.); +#339166 = LINE('',#339167,#339168); +#339167 = CARTESIAN_POINT('',(125.25,-112.,1.51)); +#339168 = VECTOR('',#339169,1.); +#339169 = DIRECTION('',(0.,-1.,0.)); +#339170 = PLANE('',#339171); +#339171 = AXIS2_PLACEMENT_3D('',#339172,#339173,#339174); +#339172 = CARTESIAN_POINT('',(125.25,-112.,1.51)); +#339173 = DIRECTION('',(1.,0.,-0.)); +#339174 = DIRECTION('',(0.,-1.,0.)); +#339175 = ADVANCED_FACE('',(#339176),#339203,.T.); +#339176 = FACE_BOUND('',#339177,.T.); +#339177 = EDGE_LOOP('',(#339178,#339179,#339188,#339196)); +#339178 = ORIENTED_EDGE('',*,*,#339157,.T.); +#339179 = ORIENTED_EDGE('',*,*,#339180,.T.); +#339180 = EDGE_CURVE('',#339150,#339181,#339183,.T.); +#339181 = VERTEX_POINT('',#339182); +#339182 = CARTESIAN_POINT('',(124.75,-113.5,1.55)); +#339183 = CIRCLE('',#339184,0.500001333575); +#339184 = AXIS2_PLACEMENT_3D('',#339185,#339186,#339187); +#339185 = CARTESIAN_POINT('',(124.74999866642,-112.9999986664,1.55)); +#339186 = DIRECTION('',(0.,0.,-1.)); +#339187 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339188 = ORIENTED_EDGE('',*,*,#339189,.F.); +#339189 = EDGE_CURVE('',#339190,#339181,#339192,.T.); +#339190 = VERTEX_POINT('',#339191); +#339191 = CARTESIAN_POINT('',(124.75,-113.5,1.51)); +#339192 = LINE('',#339193,#339194); +#339193 = CARTESIAN_POINT('',(124.75,-113.5,1.51)); +#339194 = VECTOR('',#339195,1.); +#339195 = DIRECTION('',(0.,0.,1.)); +#339196 = ORIENTED_EDGE('',*,*,#339197,.F.); +#339197 = EDGE_CURVE('',#339158,#339190,#339198,.T.); +#339198 = CIRCLE('',#339199,0.500001333575); +#339199 = AXIS2_PLACEMENT_3D('',#339200,#339201,#339202); +#339200 = CARTESIAN_POINT('',(124.74999866642,-112.9999986664,1.51)); +#339201 = DIRECTION('',(0.,0.,-1.)); +#339202 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339203 = CYLINDRICAL_SURFACE('',#339204,0.500001333575); +#339204 = AXIS2_PLACEMENT_3D('',#339205,#339206,#339207); +#339205 = CARTESIAN_POINT('',(124.74999866642,-112.9999986664,1.51)); +#339206 = DIRECTION('',(0.,0.,-1.)); +#339207 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339208 = ADVANCED_FACE('',(#339209),#339234,.T.); +#339209 = FACE_BOUND('',#339210,.T.); +#339210 = EDGE_LOOP('',(#339211,#339212,#339220,#339228)); +#339211 = ORIENTED_EDGE('',*,*,#339189,.T.); +#339212 = ORIENTED_EDGE('',*,*,#339213,.T.); +#339213 = EDGE_CURVE('',#339181,#339214,#339216,.T.); +#339214 = VERTEX_POINT('',#339215); +#339215 = CARTESIAN_POINT('',(123.75,-113.5,1.55)); +#339216 = LINE('',#339217,#339218); +#339217 = CARTESIAN_POINT('',(124.75,-113.5,1.55)); +#339218 = VECTOR('',#339219,1.); +#339219 = DIRECTION('',(-1.,0.,0.)); +#339220 = ORIENTED_EDGE('',*,*,#339221,.F.); +#339221 = EDGE_CURVE('',#339222,#339214,#339224,.T.); +#339222 = VERTEX_POINT('',#339223); +#339223 = CARTESIAN_POINT('',(123.75,-113.5,1.51)); +#339224 = LINE('',#339225,#339226); +#339225 = CARTESIAN_POINT('',(123.75,-113.5,1.51)); +#339226 = VECTOR('',#339227,1.); +#339227 = DIRECTION('',(0.,0.,1.)); +#339228 = ORIENTED_EDGE('',*,*,#339229,.F.); +#339229 = EDGE_CURVE('',#339190,#339222,#339230,.T.); +#339230 = LINE('',#339231,#339232); +#339231 = CARTESIAN_POINT('',(124.75,-113.5,1.51)); +#339232 = VECTOR('',#339233,1.); +#339233 = DIRECTION('',(-1.,0.,0.)); +#339234 = PLANE('',#339235); +#339235 = AXIS2_PLACEMENT_3D('',#339236,#339237,#339238); +#339236 = CARTESIAN_POINT('',(124.75,-113.5,1.51)); +#339237 = DIRECTION('',(0.,-1.,0.)); +#339238 = DIRECTION('',(-1.,0.,0.)); +#339239 = ADVANCED_FACE('',(#339240),#339267,.T.); +#339240 = FACE_BOUND('',#339241,.T.); +#339241 = EDGE_LOOP('',(#339242,#339243,#339252,#339260)); +#339242 = ORIENTED_EDGE('',*,*,#339221,.T.); +#339243 = ORIENTED_EDGE('',*,*,#339244,.T.); +#339244 = EDGE_CURVE('',#339214,#339245,#339247,.T.); +#339245 = VERTEX_POINT('',#339246); +#339246 = CARTESIAN_POINT('',(123.25,-113.,1.55)); +#339247 = CIRCLE('',#339248,0.500001333575); +#339248 = AXIS2_PLACEMENT_3D('',#339249,#339250,#339251); +#339249 = CARTESIAN_POINT('',(123.75000133357,-112.9999986664,1.55)); +#339250 = DIRECTION('',(0.,0.,-1.)); +#339251 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339252 = ORIENTED_EDGE('',*,*,#339253,.F.); +#339253 = EDGE_CURVE('',#339254,#339245,#339256,.T.); +#339254 = VERTEX_POINT('',#339255); +#339255 = CARTESIAN_POINT('',(123.25,-113.,1.51)); +#339256 = LINE('',#339257,#339258); +#339257 = CARTESIAN_POINT('',(123.25,-113.,1.51)); +#339258 = VECTOR('',#339259,1.); +#339259 = DIRECTION('',(0.,0.,1.)); +#339260 = ORIENTED_EDGE('',*,*,#339261,.F.); +#339261 = EDGE_CURVE('',#339222,#339254,#339262,.T.); +#339262 = CIRCLE('',#339263,0.500001333575); +#339263 = AXIS2_PLACEMENT_3D('',#339264,#339265,#339266); +#339264 = CARTESIAN_POINT('',(123.75000133357,-112.9999986664,1.51)); +#339265 = DIRECTION('',(0.,0.,-1.)); +#339266 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339267 = CYLINDRICAL_SURFACE('',#339268,0.500001333575); +#339268 = AXIS2_PLACEMENT_3D('',#339269,#339270,#339271); +#339269 = CARTESIAN_POINT('',(123.75000133357,-112.9999986664,1.51)); +#339270 = DIRECTION('',(0.,0.,-1.)); +#339271 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339272 = ADVANCED_FACE('',(#339273),#339289,.T.); +#339273 = FACE_BOUND('',#339274,.T.); +#339274 = EDGE_LOOP('',(#339275,#339276,#339282,#339283)); +#339275 = ORIENTED_EDGE('',*,*,#339253,.T.); +#339276 = ORIENTED_EDGE('',*,*,#339277,.T.); +#339277 = EDGE_CURVE('',#339245,#339045,#339278,.T.); +#339278 = LINE('',#339279,#339280); +#339279 = CARTESIAN_POINT('',(123.25,-113.,1.55)); +#339280 = VECTOR('',#339281,1.); +#339281 = DIRECTION('',(0.,1.,0.)); +#339282 = ORIENTED_EDGE('',*,*,#339042,.F.); +#339283 = ORIENTED_EDGE('',*,*,#339284,.F.); +#339284 = EDGE_CURVE('',#339254,#339043,#339285,.T.); +#339285 = LINE('',#339286,#339287); +#339286 = CARTESIAN_POINT('',(123.25,-113.,1.51)); +#339287 = VECTOR('',#339288,1.); +#339288 = DIRECTION('',(0.,1.,0.)); +#339289 = PLANE('',#339290); +#339290 = AXIS2_PLACEMENT_3D('',#339291,#339292,#339293); +#339291 = CARTESIAN_POINT('',(123.25,-113.,1.51)); +#339292 = DIRECTION('',(-1.,0.,0.)); +#339293 = DIRECTION('',(0.,1.,0.)); +#339294 = ADVANCED_FACE('',(#339295),#339305,.F.); +#339295 = FACE_BOUND('',#339296,.T.); +#339296 = EDGE_LOOP('',(#339297,#339298,#339299,#339300,#339301,#339302, + #339303,#339304)); +#339297 = ORIENTED_EDGE('',*,*,#339069,.T.); +#339298 = ORIENTED_EDGE('',*,*,#339101,.T.); +#339299 = ORIENTED_EDGE('',*,*,#339133,.T.); +#339300 = ORIENTED_EDGE('',*,*,#339165,.T.); +#339301 = ORIENTED_EDGE('',*,*,#339197,.T.); +#339302 = ORIENTED_EDGE('',*,*,#339229,.T.); +#339303 = ORIENTED_EDGE('',*,*,#339261,.T.); +#339304 = ORIENTED_EDGE('',*,*,#339284,.T.); +#339305 = PLANE('',#339306); +#339306 = AXIS2_PLACEMENT_3D('',#339307,#339308,#339309); +#339307 = CARTESIAN_POINT('',(0.,0.,1.51)); +#339308 = DIRECTION('',(0.,0.,1.)); +#339309 = DIRECTION('',(1.,0.,-0.)); +#339310 = ADVANCED_FACE('',(#339311),#339321,.T.); +#339311 = FACE_BOUND('',#339312,.F.); +#339312 = EDGE_LOOP('',(#339313,#339314,#339315,#339316,#339317,#339318, + #339319,#339320)); +#339313 = ORIENTED_EDGE('',*,*,#339052,.T.); +#339314 = ORIENTED_EDGE('',*,*,#339085,.T.); +#339315 = ORIENTED_EDGE('',*,*,#339116,.T.); +#339316 = ORIENTED_EDGE('',*,*,#339149,.T.); +#339317 = ORIENTED_EDGE('',*,*,#339180,.T.); +#339318 = ORIENTED_EDGE('',*,*,#339213,.T.); +#339319 = ORIENTED_EDGE('',*,*,#339244,.T.); +#339320 = ORIENTED_EDGE('',*,*,#339277,.T.); +#339321 = PLANE('',#339322); +#339322 = AXIS2_PLACEMENT_3D('',#339323,#339324,#339325); +#339323 = CARTESIAN_POINT('',(0.,0.,1.55)); +#339324 = DIRECTION('',(0.,0.,1.)); +#339325 = DIRECTION('',(1.,0.,-0.)); +#339326 = MANIFOLD_SOLID_BREP('',#339327); +#339327 = CLOSED_SHELL('',(#339328,#339370,#339401,#339434,#339465, + #339498,#339529,#339562,#339584,#339600)); +#339328 = ADVANCED_FACE('',(#339329),#339365,.T.); +#339329 = FACE_BOUND('',#339330,.T.); +#339330 = EDGE_LOOP('',(#339331,#339341,#339350,#339358)); +#339331 = ORIENTED_EDGE('',*,*,#339332,.T.); +#339332 = EDGE_CURVE('',#339333,#339335,#339337,.T.); +#339333 = VERTEX_POINT('',#339334); +#339334 = CARTESIAN_POINT('',(133.5,-112.,1.51)); +#339335 = VERTEX_POINT('',#339336); +#339336 = CARTESIAN_POINT('',(133.5,-112.,1.55)); +#339337 = LINE('',#339338,#339339); +#339338 = CARTESIAN_POINT('',(133.5,-112.,1.51)); +#339339 = VECTOR('',#339340,1.); +#339340 = DIRECTION('',(0.,0.,1.)); +#339341 = ORIENTED_EDGE('',*,*,#339342,.T.); +#339342 = EDGE_CURVE('',#339335,#339343,#339345,.T.); +#339343 = VERTEX_POINT('',#339344); +#339344 = CARTESIAN_POINT('',(134.,-111.5,1.55)); +#339345 = CIRCLE('',#339346,0.500001333575); +#339346 = AXIS2_PLACEMENT_3D('',#339347,#339348,#339349); +#339347 = CARTESIAN_POINT('',(134.00000133357,-112.0000013335,1.55)); +#339348 = DIRECTION('',(0.,0.,-1.)); +#339349 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339350 = ORIENTED_EDGE('',*,*,#339351,.F.); +#339351 = EDGE_CURVE('',#339352,#339343,#339354,.T.); +#339352 = VERTEX_POINT('',#339353); +#339353 = CARTESIAN_POINT('',(134.,-111.5,1.51)); +#339354 = LINE('',#339355,#339356); +#339355 = CARTESIAN_POINT('',(134.,-111.5,1.51)); +#339356 = VECTOR('',#339357,1.); +#339357 = DIRECTION('',(0.,0.,1.)); +#339358 = ORIENTED_EDGE('',*,*,#339359,.F.); +#339359 = EDGE_CURVE('',#339333,#339352,#339360,.T.); +#339360 = CIRCLE('',#339361,0.500001333575); +#339361 = AXIS2_PLACEMENT_3D('',#339362,#339363,#339364); +#339362 = CARTESIAN_POINT('',(134.00000133357,-112.0000013335,1.51)); +#339363 = DIRECTION('',(0.,0.,-1.)); +#339364 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339365 = CYLINDRICAL_SURFACE('',#339366,0.500001333575); +#339366 = AXIS2_PLACEMENT_3D('',#339367,#339368,#339369); +#339367 = CARTESIAN_POINT('',(134.00000133357,-112.0000013335,1.51)); +#339368 = DIRECTION('',(0.,0.,-1.)); +#339369 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339370 = ADVANCED_FACE('',(#339371),#339396,.T.); +#339371 = FACE_BOUND('',#339372,.T.); +#339372 = EDGE_LOOP('',(#339373,#339374,#339382,#339390)); +#339373 = ORIENTED_EDGE('',*,*,#339351,.T.); +#339374 = ORIENTED_EDGE('',*,*,#339375,.T.); +#339375 = EDGE_CURVE('',#339343,#339376,#339378,.T.); +#339376 = VERTEX_POINT('',#339377); +#339377 = CARTESIAN_POINT('',(135.,-111.5,1.55)); +#339378 = LINE('',#339379,#339380); +#339379 = CARTESIAN_POINT('',(134.,-111.5,1.55)); +#339380 = VECTOR('',#339381,1.); +#339381 = DIRECTION('',(1.,0.,0.)); +#339382 = ORIENTED_EDGE('',*,*,#339383,.F.); +#339383 = EDGE_CURVE('',#339384,#339376,#339386,.T.); +#339384 = VERTEX_POINT('',#339385); +#339385 = CARTESIAN_POINT('',(135.,-111.5,1.51)); +#339386 = LINE('',#339387,#339388); +#339387 = CARTESIAN_POINT('',(135.,-111.5,1.51)); +#339388 = VECTOR('',#339389,1.); +#339389 = DIRECTION('',(0.,0.,1.)); +#339390 = ORIENTED_EDGE('',*,*,#339391,.F.); +#339391 = EDGE_CURVE('',#339352,#339384,#339392,.T.); +#339392 = LINE('',#339393,#339394); +#339393 = CARTESIAN_POINT('',(134.,-111.5,1.51)); +#339394 = VECTOR('',#339395,1.); +#339395 = DIRECTION('',(1.,0.,0.)); +#339396 = PLANE('',#339397); +#339397 = AXIS2_PLACEMENT_3D('',#339398,#339399,#339400); +#339398 = CARTESIAN_POINT('',(134.,-111.5,1.51)); +#339399 = DIRECTION('',(0.,1.,0.)); +#339400 = DIRECTION('',(1.,0.,0.)); +#339401 = ADVANCED_FACE('',(#339402),#339429,.T.); +#339402 = FACE_BOUND('',#339403,.T.); +#339403 = EDGE_LOOP('',(#339404,#339405,#339414,#339422)); +#339404 = ORIENTED_EDGE('',*,*,#339383,.T.); +#339405 = ORIENTED_EDGE('',*,*,#339406,.T.); +#339406 = EDGE_CURVE('',#339376,#339407,#339409,.T.); +#339407 = VERTEX_POINT('',#339408); +#339408 = CARTESIAN_POINT('',(135.5,-112.,1.55)); +#339409 = CIRCLE('',#339410,0.500001333575); +#339410 = AXIS2_PLACEMENT_3D('',#339411,#339412,#339413); +#339411 = CARTESIAN_POINT('',(134.99999866642,-112.0000013335,1.55)); +#339412 = DIRECTION('',(0.,0.,-1.)); +#339413 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339414 = ORIENTED_EDGE('',*,*,#339415,.F.); +#339415 = EDGE_CURVE('',#339416,#339407,#339418,.T.); +#339416 = VERTEX_POINT('',#339417); +#339417 = CARTESIAN_POINT('',(135.5,-112.,1.51)); +#339418 = LINE('',#339419,#339420); +#339419 = CARTESIAN_POINT('',(135.5,-112.,1.51)); +#339420 = VECTOR('',#339421,1.); +#339421 = DIRECTION('',(0.,0.,1.)); +#339422 = ORIENTED_EDGE('',*,*,#339423,.F.); +#339423 = EDGE_CURVE('',#339384,#339416,#339424,.T.); +#339424 = CIRCLE('',#339425,0.500001333575); +#339425 = AXIS2_PLACEMENT_3D('',#339426,#339427,#339428); +#339426 = CARTESIAN_POINT('',(134.99999866642,-112.0000013335,1.51)); +#339427 = DIRECTION('',(0.,0.,-1.)); +#339428 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339429 = CYLINDRICAL_SURFACE('',#339430,0.500001333575); +#339430 = AXIS2_PLACEMENT_3D('',#339431,#339432,#339433); +#339431 = CARTESIAN_POINT('',(134.99999866642,-112.0000013335,1.51)); +#339432 = DIRECTION('',(0.,0.,-1.)); +#339433 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339434 = ADVANCED_FACE('',(#339435),#339460,.T.); +#339435 = FACE_BOUND('',#339436,.T.); +#339436 = EDGE_LOOP('',(#339437,#339438,#339446,#339454)); +#339437 = ORIENTED_EDGE('',*,*,#339415,.T.); +#339438 = ORIENTED_EDGE('',*,*,#339439,.T.); +#339439 = EDGE_CURVE('',#339407,#339440,#339442,.T.); +#339440 = VERTEX_POINT('',#339441); +#339441 = CARTESIAN_POINT('',(135.5,-113.,1.55)); +#339442 = LINE('',#339443,#339444); +#339443 = CARTESIAN_POINT('',(135.5,-112.,1.55)); +#339444 = VECTOR('',#339445,1.); +#339445 = DIRECTION('',(0.,-1.,0.)); +#339446 = ORIENTED_EDGE('',*,*,#339447,.F.); +#339447 = EDGE_CURVE('',#339448,#339440,#339450,.T.); +#339448 = VERTEX_POINT('',#339449); +#339449 = CARTESIAN_POINT('',(135.5,-113.,1.51)); +#339450 = LINE('',#339451,#339452); +#339451 = CARTESIAN_POINT('',(135.5,-113.,1.51)); +#339452 = VECTOR('',#339453,1.); +#339453 = DIRECTION('',(0.,0.,1.)); +#339454 = ORIENTED_EDGE('',*,*,#339455,.F.); +#339455 = EDGE_CURVE('',#339416,#339448,#339456,.T.); +#339456 = LINE('',#339457,#339458); +#339457 = CARTESIAN_POINT('',(135.5,-112.,1.51)); +#339458 = VECTOR('',#339459,1.); +#339459 = DIRECTION('',(0.,-1.,0.)); +#339460 = PLANE('',#339461); +#339461 = AXIS2_PLACEMENT_3D('',#339462,#339463,#339464); +#339462 = CARTESIAN_POINT('',(135.5,-112.,1.51)); +#339463 = DIRECTION('',(1.,0.,-0.)); +#339464 = DIRECTION('',(0.,-1.,0.)); +#339465 = ADVANCED_FACE('',(#339466),#339493,.T.); +#339466 = FACE_BOUND('',#339467,.T.); +#339467 = EDGE_LOOP('',(#339468,#339469,#339478,#339486)); +#339468 = ORIENTED_EDGE('',*,*,#339447,.T.); +#339469 = ORIENTED_EDGE('',*,*,#339470,.T.); +#339470 = EDGE_CURVE('',#339440,#339471,#339473,.T.); +#339471 = VERTEX_POINT('',#339472); +#339472 = CARTESIAN_POINT('',(135.,-113.5,1.55)); +#339473 = CIRCLE('',#339474,0.500001333575); +#339474 = AXIS2_PLACEMENT_3D('',#339475,#339476,#339477); +#339475 = CARTESIAN_POINT('',(134.99999866642,-112.9999986664,1.55)); +#339476 = DIRECTION('',(0.,0.,-1.)); +#339477 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339478 = ORIENTED_EDGE('',*,*,#339479,.F.); +#339479 = EDGE_CURVE('',#339480,#339471,#339482,.T.); +#339480 = VERTEX_POINT('',#339481); +#339481 = CARTESIAN_POINT('',(135.,-113.5,1.51)); +#339482 = LINE('',#339483,#339484); +#339483 = CARTESIAN_POINT('',(135.,-113.5,1.51)); +#339484 = VECTOR('',#339485,1.); +#339485 = DIRECTION('',(0.,0.,1.)); +#339486 = ORIENTED_EDGE('',*,*,#339487,.F.); +#339487 = EDGE_CURVE('',#339448,#339480,#339488,.T.); +#339488 = CIRCLE('',#339489,0.500001333575); +#339489 = AXIS2_PLACEMENT_3D('',#339490,#339491,#339492); +#339490 = CARTESIAN_POINT('',(134.99999866642,-112.9999986664,1.51)); +#339491 = DIRECTION('',(0.,0.,-1.)); +#339492 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339493 = CYLINDRICAL_SURFACE('',#339494,0.500001333575); +#339494 = AXIS2_PLACEMENT_3D('',#339495,#339496,#339497); +#339495 = CARTESIAN_POINT('',(134.99999866642,-112.9999986664,1.51)); +#339496 = DIRECTION('',(0.,0.,-1.)); +#339497 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339498 = ADVANCED_FACE('',(#339499),#339524,.T.); +#339499 = FACE_BOUND('',#339500,.T.); +#339500 = EDGE_LOOP('',(#339501,#339502,#339510,#339518)); +#339501 = ORIENTED_EDGE('',*,*,#339479,.T.); +#339502 = ORIENTED_EDGE('',*,*,#339503,.T.); +#339503 = EDGE_CURVE('',#339471,#339504,#339506,.T.); +#339504 = VERTEX_POINT('',#339505); +#339505 = CARTESIAN_POINT('',(134.,-113.5,1.55)); +#339506 = LINE('',#339507,#339508); +#339507 = CARTESIAN_POINT('',(135.,-113.5,1.55)); +#339508 = VECTOR('',#339509,1.); +#339509 = DIRECTION('',(-1.,0.,0.)); +#339510 = ORIENTED_EDGE('',*,*,#339511,.F.); +#339511 = EDGE_CURVE('',#339512,#339504,#339514,.T.); +#339512 = VERTEX_POINT('',#339513); +#339513 = CARTESIAN_POINT('',(134.,-113.5,1.51)); +#339514 = LINE('',#339515,#339516); +#339515 = CARTESIAN_POINT('',(134.,-113.5,1.51)); +#339516 = VECTOR('',#339517,1.); +#339517 = DIRECTION('',(0.,0.,1.)); +#339518 = ORIENTED_EDGE('',*,*,#339519,.F.); +#339519 = EDGE_CURVE('',#339480,#339512,#339520,.T.); +#339520 = LINE('',#339521,#339522); +#339521 = CARTESIAN_POINT('',(135.,-113.5,1.51)); +#339522 = VECTOR('',#339523,1.); +#339523 = DIRECTION('',(-1.,0.,0.)); +#339524 = PLANE('',#339525); +#339525 = AXIS2_PLACEMENT_3D('',#339526,#339527,#339528); +#339526 = CARTESIAN_POINT('',(135.,-113.5,1.51)); +#339527 = DIRECTION('',(0.,-1.,0.)); +#339528 = DIRECTION('',(-1.,0.,0.)); +#339529 = ADVANCED_FACE('',(#339530),#339557,.T.); +#339530 = FACE_BOUND('',#339531,.T.); +#339531 = EDGE_LOOP('',(#339532,#339533,#339542,#339550)); +#339532 = ORIENTED_EDGE('',*,*,#339511,.T.); +#339533 = ORIENTED_EDGE('',*,*,#339534,.T.); +#339534 = EDGE_CURVE('',#339504,#339535,#339537,.T.); +#339535 = VERTEX_POINT('',#339536); +#339536 = CARTESIAN_POINT('',(133.5,-113.,1.55)); +#339537 = CIRCLE('',#339538,0.500001333575); +#339538 = AXIS2_PLACEMENT_3D('',#339539,#339540,#339541); +#339539 = CARTESIAN_POINT('',(134.00000133357,-112.9999986664,1.55)); +#339540 = DIRECTION('',(0.,0.,-1.)); +#339541 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339542 = ORIENTED_EDGE('',*,*,#339543,.F.); +#339543 = EDGE_CURVE('',#339544,#339535,#339546,.T.); +#339544 = VERTEX_POINT('',#339545); +#339545 = CARTESIAN_POINT('',(133.5,-113.,1.51)); +#339546 = LINE('',#339547,#339548); +#339547 = CARTESIAN_POINT('',(133.5,-113.,1.51)); +#339548 = VECTOR('',#339549,1.); +#339549 = DIRECTION('',(0.,0.,1.)); +#339550 = ORIENTED_EDGE('',*,*,#339551,.F.); +#339551 = EDGE_CURVE('',#339512,#339544,#339552,.T.); +#339552 = CIRCLE('',#339553,0.500001333575); +#339553 = AXIS2_PLACEMENT_3D('',#339554,#339555,#339556); +#339554 = CARTESIAN_POINT('',(134.00000133357,-112.9999986664,1.51)); +#339555 = DIRECTION('',(0.,0.,-1.)); +#339556 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339557 = CYLINDRICAL_SURFACE('',#339558,0.500001333575); +#339558 = AXIS2_PLACEMENT_3D('',#339559,#339560,#339561); +#339559 = CARTESIAN_POINT('',(134.00000133357,-112.9999986664,1.51)); +#339560 = DIRECTION('',(0.,0.,-1.)); +#339561 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339562 = ADVANCED_FACE('',(#339563),#339579,.T.); +#339563 = FACE_BOUND('',#339564,.T.); +#339564 = EDGE_LOOP('',(#339565,#339566,#339572,#339573)); +#339565 = ORIENTED_EDGE('',*,*,#339543,.T.); +#339566 = ORIENTED_EDGE('',*,*,#339567,.T.); +#339567 = EDGE_CURVE('',#339535,#339335,#339568,.T.); +#339568 = LINE('',#339569,#339570); +#339569 = CARTESIAN_POINT('',(133.5,-113.,1.55)); +#339570 = VECTOR('',#339571,1.); +#339571 = DIRECTION('',(0.,1.,0.)); +#339572 = ORIENTED_EDGE('',*,*,#339332,.F.); +#339573 = ORIENTED_EDGE('',*,*,#339574,.F.); +#339574 = EDGE_CURVE('',#339544,#339333,#339575,.T.); +#339575 = LINE('',#339576,#339577); +#339576 = CARTESIAN_POINT('',(133.5,-113.,1.51)); +#339577 = VECTOR('',#339578,1.); +#339578 = DIRECTION('',(0.,1.,0.)); +#339579 = PLANE('',#339580); +#339580 = AXIS2_PLACEMENT_3D('',#339581,#339582,#339583); +#339581 = CARTESIAN_POINT('',(133.5,-113.,1.51)); +#339582 = DIRECTION('',(-1.,0.,0.)); +#339583 = DIRECTION('',(0.,1.,0.)); +#339584 = ADVANCED_FACE('',(#339585),#339595,.F.); +#339585 = FACE_BOUND('',#339586,.T.); +#339586 = EDGE_LOOP('',(#339587,#339588,#339589,#339590,#339591,#339592, + #339593,#339594)); +#339587 = ORIENTED_EDGE('',*,*,#339359,.T.); +#339588 = ORIENTED_EDGE('',*,*,#339391,.T.); +#339589 = ORIENTED_EDGE('',*,*,#339423,.T.); +#339590 = ORIENTED_EDGE('',*,*,#339455,.T.); +#339591 = ORIENTED_EDGE('',*,*,#339487,.T.); +#339592 = ORIENTED_EDGE('',*,*,#339519,.T.); +#339593 = ORIENTED_EDGE('',*,*,#339551,.T.); +#339594 = ORIENTED_EDGE('',*,*,#339574,.T.); +#339595 = PLANE('',#339596); +#339596 = AXIS2_PLACEMENT_3D('',#339597,#339598,#339599); +#339597 = CARTESIAN_POINT('',(0.,0.,1.51)); +#339598 = DIRECTION('',(0.,0.,1.)); +#339599 = DIRECTION('',(1.,0.,-0.)); +#339600 = ADVANCED_FACE('',(#339601),#339611,.T.); +#339601 = FACE_BOUND('',#339602,.F.); +#339602 = EDGE_LOOP('',(#339603,#339604,#339605,#339606,#339607,#339608, + #339609,#339610)); +#339603 = ORIENTED_EDGE('',*,*,#339342,.T.); +#339604 = ORIENTED_EDGE('',*,*,#339375,.T.); +#339605 = ORIENTED_EDGE('',*,*,#339406,.T.); +#339606 = ORIENTED_EDGE('',*,*,#339439,.T.); +#339607 = ORIENTED_EDGE('',*,*,#339470,.T.); +#339608 = ORIENTED_EDGE('',*,*,#339503,.T.); +#339609 = ORIENTED_EDGE('',*,*,#339534,.T.); +#339610 = ORIENTED_EDGE('',*,*,#339567,.T.); +#339611 = PLANE('',#339612); +#339612 = AXIS2_PLACEMENT_3D('',#339613,#339614,#339615); +#339613 = CARTESIAN_POINT('',(0.,0.,1.55)); +#339614 = DIRECTION('',(0.,0.,1.)); +#339615 = DIRECTION('',(1.,0.,-0.)); +#339616 = MANIFOLD_SOLID_BREP('',#339617); +#339617 = CLOSED_SHELL('',(#339618,#339658,#339689,#339720,#339742, + #339754)); +#339618 = ADVANCED_FACE('',(#339619),#339653,.T.); +#339619 = FACE_BOUND('',#339620,.T.); +#339620 = EDGE_LOOP('',(#339621,#339631,#339639,#339647)); +#339621 = ORIENTED_EDGE('',*,*,#339622,.T.); +#339622 = EDGE_CURVE('',#339623,#339625,#339627,.T.); +#339623 = VERTEX_POINT('',#339624); +#339624 = CARTESIAN_POINT('',(143.265,-83.16,1.51)); +#339625 = VERTEX_POINT('',#339626); +#339626 = CARTESIAN_POINT('',(143.265,-83.16,1.55)); +#339627 = LINE('',#339628,#339629); +#339628 = CARTESIAN_POINT('',(143.265,-83.16,1.51)); +#339629 = VECTOR('',#339630,1.); +#339630 = DIRECTION('',(0.,0.,1.)); +#339631 = ORIENTED_EDGE('',*,*,#339632,.T.); +#339632 = EDGE_CURVE('',#339625,#339633,#339635,.T.); +#339633 = VERTEX_POINT('',#339634); +#339634 = CARTESIAN_POINT('',(143.265,-81.66,1.55)); +#339635 = LINE('',#339636,#339637); +#339636 = CARTESIAN_POINT('',(143.265,-83.16,1.55)); +#339637 = VECTOR('',#339638,1.); +#339638 = DIRECTION('',(0.,1.,0.)); +#339639 = ORIENTED_EDGE('',*,*,#339640,.F.); +#339640 = EDGE_CURVE('',#339641,#339633,#339643,.T.); +#339641 = VERTEX_POINT('',#339642); +#339642 = CARTESIAN_POINT('',(143.265,-81.66,1.51)); +#339643 = LINE('',#339644,#339645); +#339644 = CARTESIAN_POINT('',(143.265,-81.66,1.51)); +#339645 = VECTOR('',#339646,1.); +#339646 = DIRECTION('',(0.,0.,1.)); +#339647 = ORIENTED_EDGE('',*,*,#339648,.F.); +#339648 = EDGE_CURVE('',#339623,#339641,#339649,.T.); +#339649 = LINE('',#339650,#339651); +#339650 = CARTESIAN_POINT('',(143.265,-83.16,1.51)); +#339651 = VECTOR('',#339652,1.); +#339652 = DIRECTION('',(0.,1.,0.)); +#339653 = PLANE('',#339654); +#339654 = AXIS2_PLACEMENT_3D('',#339655,#339656,#339657); +#339655 = CARTESIAN_POINT('',(143.265,-83.16,1.51)); +#339656 = DIRECTION('',(-1.,0.,0.)); +#339657 = DIRECTION('',(0.,1.,0.)); +#339658 = ADVANCED_FACE('',(#339659),#339684,.T.); +#339659 = FACE_BOUND('',#339660,.T.); +#339660 = EDGE_LOOP('',(#339661,#339662,#339670,#339678)); +#339661 = ORIENTED_EDGE('',*,*,#339640,.T.); +#339662 = ORIENTED_EDGE('',*,*,#339663,.T.); +#339663 = EDGE_CURVE('',#339633,#339664,#339666,.T.); +#339664 = VERTEX_POINT('',#339665); +#339665 = CARTESIAN_POINT('',(144.165,-81.66,1.55)); +#339666 = LINE('',#339667,#339668); +#339667 = CARTESIAN_POINT('',(143.265,-81.66,1.55)); +#339668 = VECTOR('',#339669,1.); +#339669 = DIRECTION('',(1.,0.,0.)); +#339670 = ORIENTED_EDGE('',*,*,#339671,.F.); +#339671 = EDGE_CURVE('',#339672,#339664,#339674,.T.); +#339672 = VERTEX_POINT('',#339673); +#339673 = CARTESIAN_POINT('',(144.165,-81.66,1.51)); +#339674 = LINE('',#339675,#339676); +#339675 = CARTESIAN_POINT('',(144.165,-81.66,1.51)); +#339676 = VECTOR('',#339677,1.); +#339677 = DIRECTION('',(0.,0.,1.)); +#339678 = ORIENTED_EDGE('',*,*,#339679,.F.); +#339679 = EDGE_CURVE('',#339641,#339672,#339680,.T.); +#339680 = LINE('',#339681,#339682); +#339681 = CARTESIAN_POINT('',(143.265,-81.66,1.51)); +#339682 = VECTOR('',#339683,1.); +#339683 = DIRECTION('',(1.,0.,0.)); +#339684 = PLANE('',#339685); +#339685 = AXIS2_PLACEMENT_3D('',#339686,#339687,#339688); +#339686 = CARTESIAN_POINT('',(143.265,-81.66,1.51)); +#339687 = DIRECTION('',(0.,1.,0.)); +#339688 = DIRECTION('',(1.,0.,0.)); +#339689 = ADVANCED_FACE('',(#339690),#339715,.T.); +#339690 = FACE_BOUND('',#339691,.T.); +#339691 = EDGE_LOOP('',(#339692,#339693,#339701,#339709)); +#339692 = ORIENTED_EDGE('',*,*,#339671,.T.); +#339693 = ORIENTED_EDGE('',*,*,#339694,.T.); +#339694 = EDGE_CURVE('',#339664,#339695,#339697,.T.); +#339695 = VERTEX_POINT('',#339696); +#339696 = CARTESIAN_POINT('',(144.165,-83.16,1.55)); +#339697 = LINE('',#339698,#339699); +#339698 = CARTESIAN_POINT('',(144.165,-81.66,1.55)); +#339699 = VECTOR('',#339700,1.); +#339700 = DIRECTION('',(0.,-1.,0.)); +#339701 = ORIENTED_EDGE('',*,*,#339702,.F.); +#339702 = EDGE_CURVE('',#339703,#339695,#339705,.T.); +#339703 = VERTEX_POINT('',#339704); +#339704 = CARTESIAN_POINT('',(144.165,-83.16,1.51)); +#339705 = LINE('',#339706,#339707); +#339706 = CARTESIAN_POINT('',(144.165,-83.16,1.51)); +#339707 = VECTOR('',#339708,1.); +#339708 = DIRECTION('',(0.,0.,1.)); +#339709 = ORIENTED_EDGE('',*,*,#339710,.F.); +#339710 = EDGE_CURVE('',#339672,#339703,#339711,.T.); +#339711 = LINE('',#339712,#339713); +#339712 = CARTESIAN_POINT('',(144.165,-81.66,1.51)); +#339713 = VECTOR('',#339714,1.); +#339714 = DIRECTION('',(0.,-1.,0.)); +#339715 = PLANE('',#339716); +#339716 = AXIS2_PLACEMENT_3D('',#339717,#339718,#339719); +#339717 = CARTESIAN_POINT('',(144.165,-81.66,1.51)); +#339718 = DIRECTION('',(1.,0.,-0.)); +#339719 = DIRECTION('',(0.,-1.,0.)); +#339720 = ADVANCED_FACE('',(#339721),#339737,.T.); +#339721 = FACE_BOUND('',#339722,.T.); +#339722 = EDGE_LOOP('',(#339723,#339724,#339730,#339731)); +#339723 = ORIENTED_EDGE('',*,*,#339702,.T.); +#339724 = ORIENTED_EDGE('',*,*,#339725,.T.); +#339725 = EDGE_CURVE('',#339695,#339625,#339726,.T.); +#339726 = LINE('',#339727,#339728); +#339727 = CARTESIAN_POINT('',(144.165,-83.16,1.55)); +#339728 = VECTOR('',#339729,1.); +#339729 = DIRECTION('',(-1.,0.,0.)); +#339730 = ORIENTED_EDGE('',*,*,#339622,.F.); +#339731 = ORIENTED_EDGE('',*,*,#339732,.F.); +#339732 = EDGE_CURVE('',#339703,#339623,#339733,.T.); +#339733 = LINE('',#339734,#339735); +#339734 = CARTESIAN_POINT('',(144.165,-83.16,1.51)); +#339735 = VECTOR('',#339736,1.); +#339736 = DIRECTION('',(-1.,0.,0.)); +#339737 = PLANE('',#339738); +#339738 = AXIS2_PLACEMENT_3D('',#339739,#339740,#339741); +#339739 = CARTESIAN_POINT('',(144.165,-83.16,1.51)); +#339740 = DIRECTION('',(0.,-1.,0.)); +#339741 = DIRECTION('',(-1.,0.,0.)); +#339742 = ADVANCED_FACE('',(#339743),#339749,.F.); +#339743 = FACE_BOUND('',#339744,.T.); +#339744 = EDGE_LOOP('',(#339745,#339746,#339747,#339748)); +#339745 = ORIENTED_EDGE('',*,*,#339648,.T.); +#339746 = ORIENTED_EDGE('',*,*,#339679,.T.); +#339747 = ORIENTED_EDGE('',*,*,#339710,.T.); +#339748 = ORIENTED_EDGE('',*,*,#339732,.T.); +#339749 = PLANE('',#339750); +#339750 = AXIS2_PLACEMENT_3D('',#339751,#339752,#339753); +#339751 = CARTESIAN_POINT('',(0.,0.,1.51)); +#339752 = DIRECTION('',(0.,0.,1.)); +#339753 = DIRECTION('',(1.,0.,-0.)); +#339754 = ADVANCED_FACE('',(#339755),#339761,.T.); +#339755 = FACE_BOUND('',#339756,.F.); +#339756 = EDGE_LOOP('',(#339757,#339758,#339759,#339760)); +#339757 = ORIENTED_EDGE('',*,*,#339632,.T.); +#339758 = ORIENTED_EDGE('',*,*,#339663,.T.); +#339759 = ORIENTED_EDGE('',*,*,#339694,.T.); +#339760 = ORIENTED_EDGE('',*,*,#339725,.T.); +#339761 = PLANE('',#339762); +#339762 = AXIS2_PLACEMENT_3D('',#339763,#339764,#339765); +#339763 = CARTESIAN_POINT('',(0.,0.,1.55)); +#339764 = DIRECTION('',(0.,0.,1.)); +#339765 = DIRECTION('',(1.,0.,-0.)); +#339766 = MANIFOLD_SOLID_BREP('',#339767); +#339767 = CLOSED_SHELL('',(#339768,#339810,#339841,#339874,#339905, + #339938,#339969,#340002,#340024,#340040)); +#339768 = ADVANCED_FACE('',(#339769),#339805,.T.); +#339769 = FACE_BOUND('',#339770,.T.); +#339770 = EDGE_LOOP('',(#339771,#339781,#339790,#339798)); +#339771 = ORIENTED_EDGE('',*,*,#339772,.T.); +#339772 = EDGE_CURVE('',#339773,#339775,#339777,.T.); +#339773 = VERTEX_POINT('',#339774); +#339774 = CARTESIAN_POINT('',(143.75,-112.,1.51)); +#339775 = VERTEX_POINT('',#339776); +#339776 = CARTESIAN_POINT('',(143.75,-112.,1.55)); +#339777 = LINE('',#339778,#339779); +#339778 = CARTESIAN_POINT('',(143.75,-112.,1.51)); +#339779 = VECTOR('',#339780,1.); +#339780 = DIRECTION('',(0.,0.,1.)); +#339781 = ORIENTED_EDGE('',*,*,#339782,.T.); +#339782 = EDGE_CURVE('',#339775,#339783,#339785,.T.); +#339783 = VERTEX_POINT('',#339784); +#339784 = CARTESIAN_POINT('',(144.25,-111.5,1.55)); +#339785 = CIRCLE('',#339786,0.500001333575); +#339786 = AXIS2_PLACEMENT_3D('',#339787,#339788,#339789); +#339787 = CARTESIAN_POINT('',(144.25000133357,-112.0000013335,1.55)); +#339788 = DIRECTION('',(0.,0.,-1.)); +#339789 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339790 = ORIENTED_EDGE('',*,*,#339791,.F.); +#339791 = EDGE_CURVE('',#339792,#339783,#339794,.T.); +#339792 = VERTEX_POINT('',#339793); +#339793 = CARTESIAN_POINT('',(144.25,-111.5,1.51)); +#339794 = LINE('',#339795,#339796); +#339795 = CARTESIAN_POINT('',(144.25,-111.5,1.51)); +#339796 = VECTOR('',#339797,1.); +#339797 = DIRECTION('',(0.,0.,1.)); +#339798 = ORIENTED_EDGE('',*,*,#339799,.F.); +#339799 = EDGE_CURVE('',#339773,#339792,#339800,.T.); +#339800 = CIRCLE('',#339801,0.500001333575); +#339801 = AXIS2_PLACEMENT_3D('',#339802,#339803,#339804); +#339802 = CARTESIAN_POINT('',(144.25000133357,-112.0000013335,1.51)); +#339803 = DIRECTION('',(0.,0.,-1.)); +#339804 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339805 = CYLINDRICAL_SURFACE('',#339806,0.500001333575); +#339806 = AXIS2_PLACEMENT_3D('',#339807,#339808,#339809); +#339807 = CARTESIAN_POINT('',(144.25000133357,-112.0000013335,1.51)); +#339808 = DIRECTION('',(0.,0.,-1.)); +#339809 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#339810 = ADVANCED_FACE('',(#339811),#339836,.T.); +#339811 = FACE_BOUND('',#339812,.T.); +#339812 = EDGE_LOOP('',(#339813,#339814,#339822,#339830)); +#339813 = ORIENTED_EDGE('',*,*,#339791,.T.); +#339814 = ORIENTED_EDGE('',*,*,#339815,.T.); +#339815 = EDGE_CURVE('',#339783,#339816,#339818,.T.); +#339816 = VERTEX_POINT('',#339817); +#339817 = CARTESIAN_POINT('',(145.25,-111.5,1.55)); +#339818 = LINE('',#339819,#339820); +#339819 = CARTESIAN_POINT('',(144.25,-111.5,1.55)); +#339820 = VECTOR('',#339821,1.); +#339821 = DIRECTION('',(1.,0.,0.)); +#339822 = ORIENTED_EDGE('',*,*,#339823,.F.); +#339823 = EDGE_CURVE('',#339824,#339816,#339826,.T.); +#339824 = VERTEX_POINT('',#339825); +#339825 = CARTESIAN_POINT('',(145.25,-111.5,1.51)); +#339826 = LINE('',#339827,#339828); +#339827 = CARTESIAN_POINT('',(145.25,-111.5,1.51)); +#339828 = VECTOR('',#339829,1.); +#339829 = DIRECTION('',(0.,0.,1.)); +#339830 = ORIENTED_EDGE('',*,*,#339831,.F.); +#339831 = EDGE_CURVE('',#339792,#339824,#339832,.T.); +#339832 = LINE('',#339833,#339834); +#339833 = CARTESIAN_POINT('',(144.25,-111.5,1.51)); +#339834 = VECTOR('',#339835,1.); +#339835 = DIRECTION('',(1.,0.,0.)); +#339836 = PLANE('',#339837); +#339837 = AXIS2_PLACEMENT_3D('',#339838,#339839,#339840); +#339838 = CARTESIAN_POINT('',(144.25,-111.5,1.51)); +#339839 = DIRECTION('',(0.,1.,0.)); +#339840 = DIRECTION('',(1.,0.,0.)); +#339841 = ADVANCED_FACE('',(#339842),#339869,.T.); +#339842 = FACE_BOUND('',#339843,.T.); +#339843 = EDGE_LOOP('',(#339844,#339845,#339854,#339862)); +#339844 = ORIENTED_EDGE('',*,*,#339823,.T.); +#339845 = ORIENTED_EDGE('',*,*,#339846,.T.); +#339846 = EDGE_CURVE('',#339816,#339847,#339849,.T.); +#339847 = VERTEX_POINT('',#339848); +#339848 = CARTESIAN_POINT('',(145.75,-112.,1.55)); +#339849 = CIRCLE('',#339850,0.500001333575); +#339850 = AXIS2_PLACEMENT_3D('',#339851,#339852,#339853); +#339851 = CARTESIAN_POINT('',(145.24999866642,-112.0000013335,1.55)); +#339852 = DIRECTION('',(0.,0.,-1.)); +#339853 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339854 = ORIENTED_EDGE('',*,*,#339855,.F.); +#339855 = EDGE_CURVE('',#339856,#339847,#339858,.T.); +#339856 = VERTEX_POINT('',#339857); +#339857 = CARTESIAN_POINT('',(145.75,-112.,1.51)); +#339858 = LINE('',#339859,#339860); +#339859 = CARTESIAN_POINT('',(145.75,-112.,1.51)); +#339860 = VECTOR('',#339861,1.); +#339861 = DIRECTION('',(0.,0.,1.)); +#339862 = ORIENTED_EDGE('',*,*,#339863,.F.); +#339863 = EDGE_CURVE('',#339824,#339856,#339864,.T.); +#339864 = CIRCLE('',#339865,0.500001333575); +#339865 = AXIS2_PLACEMENT_3D('',#339866,#339867,#339868); +#339866 = CARTESIAN_POINT('',(145.24999866642,-112.0000013335,1.51)); +#339867 = DIRECTION('',(0.,0.,-1.)); +#339868 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339869 = CYLINDRICAL_SURFACE('',#339870,0.500001333575); +#339870 = AXIS2_PLACEMENT_3D('',#339871,#339872,#339873); +#339871 = CARTESIAN_POINT('',(145.24999866642,-112.0000013335,1.51)); +#339872 = DIRECTION('',(0.,0.,-1.)); +#339873 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#339874 = ADVANCED_FACE('',(#339875),#339900,.T.); +#339875 = FACE_BOUND('',#339876,.T.); +#339876 = EDGE_LOOP('',(#339877,#339878,#339886,#339894)); +#339877 = ORIENTED_EDGE('',*,*,#339855,.T.); +#339878 = ORIENTED_EDGE('',*,*,#339879,.T.); +#339879 = EDGE_CURVE('',#339847,#339880,#339882,.T.); +#339880 = VERTEX_POINT('',#339881); +#339881 = CARTESIAN_POINT('',(145.75,-113.,1.55)); +#339882 = LINE('',#339883,#339884); +#339883 = CARTESIAN_POINT('',(145.75,-112.,1.55)); +#339884 = VECTOR('',#339885,1.); +#339885 = DIRECTION('',(0.,-1.,0.)); +#339886 = ORIENTED_EDGE('',*,*,#339887,.F.); +#339887 = EDGE_CURVE('',#339888,#339880,#339890,.T.); +#339888 = VERTEX_POINT('',#339889); +#339889 = CARTESIAN_POINT('',(145.75,-113.,1.51)); +#339890 = LINE('',#339891,#339892); +#339891 = CARTESIAN_POINT('',(145.75,-113.,1.51)); +#339892 = VECTOR('',#339893,1.); +#339893 = DIRECTION('',(0.,0.,1.)); +#339894 = ORIENTED_EDGE('',*,*,#339895,.F.); +#339895 = EDGE_CURVE('',#339856,#339888,#339896,.T.); +#339896 = LINE('',#339897,#339898); +#339897 = CARTESIAN_POINT('',(145.75,-112.,1.51)); +#339898 = VECTOR('',#339899,1.); +#339899 = DIRECTION('',(0.,-1.,0.)); +#339900 = PLANE('',#339901); +#339901 = AXIS2_PLACEMENT_3D('',#339902,#339903,#339904); +#339902 = CARTESIAN_POINT('',(145.75,-112.,1.51)); +#339903 = DIRECTION('',(1.,0.,-0.)); +#339904 = DIRECTION('',(0.,-1.,0.)); +#339905 = ADVANCED_FACE('',(#339906),#339933,.T.); +#339906 = FACE_BOUND('',#339907,.T.); +#339907 = EDGE_LOOP('',(#339908,#339909,#339918,#339926)); +#339908 = ORIENTED_EDGE('',*,*,#339887,.T.); +#339909 = ORIENTED_EDGE('',*,*,#339910,.T.); +#339910 = EDGE_CURVE('',#339880,#339911,#339913,.T.); +#339911 = VERTEX_POINT('',#339912); +#339912 = CARTESIAN_POINT('',(145.25,-113.5,1.55)); +#339913 = CIRCLE('',#339914,0.500001333575); +#339914 = AXIS2_PLACEMENT_3D('',#339915,#339916,#339917); +#339915 = CARTESIAN_POINT('',(145.24999866642,-112.9999986664,1.55)); +#339916 = DIRECTION('',(0.,0.,-1.)); +#339917 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339918 = ORIENTED_EDGE('',*,*,#339919,.F.); +#339919 = EDGE_CURVE('',#339920,#339911,#339922,.T.); +#339920 = VERTEX_POINT('',#339921); +#339921 = CARTESIAN_POINT('',(145.25,-113.5,1.51)); +#339922 = LINE('',#339923,#339924); +#339923 = CARTESIAN_POINT('',(145.25,-113.5,1.51)); +#339924 = VECTOR('',#339925,1.); +#339925 = DIRECTION('',(0.,0.,1.)); +#339926 = ORIENTED_EDGE('',*,*,#339927,.F.); +#339927 = EDGE_CURVE('',#339888,#339920,#339928,.T.); +#339928 = CIRCLE('',#339929,0.500001333575); +#339929 = AXIS2_PLACEMENT_3D('',#339930,#339931,#339932); +#339930 = CARTESIAN_POINT('',(145.24999866642,-112.9999986664,1.51)); +#339931 = DIRECTION('',(0.,0.,-1.)); +#339932 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339933 = CYLINDRICAL_SURFACE('',#339934,0.500001333575); +#339934 = AXIS2_PLACEMENT_3D('',#339935,#339936,#339937); +#339935 = CARTESIAN_POINT('',(145.24999866642,-112.9999986664,1.51)); +#339936 = DIRECTION('',(0.,0.,-1.)); +#339937 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#339938 = ADVANCED_FACE('',(#339939),#339964,.T.); +#339939 = FACE_BOUND('',#339940,.T.); +#339940 = EDGE_LOOP('',(#339941,#339942,#339950,#339958)); +#339941 = ORIENTED_EDGE('',*,*,#339919,.T.); +#339942 = ORIENTED_EDGE('',*,*,#339943,.T.); +#339943 = EDGE_CURVE('',#339911,#339944,#339946,.T.); +#339944 = VERTEX_POINT('',#339945); +#339945 = CARTESIAN_POINT('',(144.25,-113.5,1.55)); +#339946 = LINE('',#339947,#339948); +#339947 = CARTESIAN_POINT('',(145.25,-113.5,1.55)); +#339948 = VECTOR('',#339949,1.); +#339949 = DIRECTION('',(-1.,0.,0.)); +#339950 = ORIENTED_EDGE('',*,*,#339951,.F.); +#339951 = EDGE_CURVE('',#339952,#339944,#339954,.T.); +#339952 = VERTEX_POINT('',#339953); +#339953 = CARTESIAN_POINT('',(144.25,-113.5,1.51)); +#339954 = LINE('',#339955,#339956); +#339955 = CARTESIAN_POINT('',(144.25,-113.5,1.51)); +#339956 = VECTOR('',#339957,1.); +#339957 = DIRECTION('',(0.,0.,1.)); +#339958 = ORIENTED_EDGE('',*,*,#339959,.F.); +#339959 = EDGE_CURVE('',#339920,#339952,#339960,.T.); +#339960 = LINE('',#339961,#339962); +#339961 = CARTESIAN_POINT('',(145.25,-113.5,1.51)); +#339962 = VECTOR('',#339963,1.); +#339963 = DIRECTION('',(-1.,0.,0.)); +#339964 = PLANE('',#339965); +#339965 = AXIS2_PLACEMENT_3D('',#339966,#339967,#339968); +#339966 = CARTESIAN_POINT('',(145.25,-113.5,1.51)); +#339967 = DIRECTION('',(0.,-1.,0.)); +#339968 = DIRECTION('',(-1.,0.,0.)); +#339969 = ADVANCED_FACE('',(#339970),#339997,.T.); +#339970 = FACE_BOUND('',#339971,.T.); +#339971 = EDGE_LOOP('',(#339972,#339973,#339982,#339990)); +#339972 = ORIENTED_EDGE('',*,*,#339951,.T.); +#339973 = ORIENTED_EDGE('',*,*,#339974,.T.); +#339974 = EDGE_CURVE('',#339944,#339975,#339977,.T.); +#339975 = VERTEX_POINT('',#339976); +#339976 = CARTESIAN_POINT('',(143.75,-113.,1.55)); +#339977 = CIRCLE('',#339978,0.500001333575); +#339978 = AXIS2_PLACEMENT_3D('',#339979,#339980,#339981); +#339979 = CARTESIAN_POINT('',(144.25000133357,-112.9999986664,1.55)); +#339980 = DIRECTION('',(0.,0.,-1.)); +#339981 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339982 = ORIENTED_EDGE('',*,*,#339983,.F.); +#339983 = EDGE_CURVE('',#339984,#339975,#339986,.T.); +#339984 = VERTEX_POINT('',#339985); +#339985 = CARTESIAN_POINT('',(143.75,-113.,1.51)); +#339986 = LINE('',#339987,#339988); +#339987 = CARTESIAN_POINT('',(143.75,-113.,1.51)); +#339988 = VECTOR('',#339989,1.); +#339989 = DIRECTION('',(0.,0.,1.)); +#339990 = ORIENTED_EDGE('',*,*,#339991,.F.); +#339991 = EDGE_CURVE('',#339952,#339984,#339992,.T.); +#339992 = CIRCLE('',#339993,0.500001333575); +#339993 = AXIS2_PLACEMENT_3D('',#339994,#339995,#339996); +#339994 = CARTESIAN_POINT('',(144.25000133357,-112.9999986664,1.51)); +#339995 = DIRECTION('',(0.,0.,-1.)); +#339996 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#339997 = CYLINDRICAL_SURFACE('',#339998,0.500001333575); +#339998 = AXIS2_PLACEMENT_3D('',#339999,#340000,#340001); +#339999 = CARTESIAN_POINT('',(144.25000133357,-112.9999986664,1.51)); +#340000 = DIRECTION('',(0.,0.,-1.)); +#340001 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340002 = ADVANCED_FACE('',(#340003),#340019,.T.); +#340003 = FACE_BOUND('',#340004,.T.); +#340004 = EDGE_LOOP('',(#340005,#340006,#340012,#340013)); +#340005 = ORIENTED_EDGE('',*,*,#339983,.T.); +#340006 = ORIENTED_EDGE('',*,*,#340007,.T.); +#340007 = EDGE_CURVE('',#339975,#339775,#340008,.T.); +#340008 = LINE('',#340009,#340010); +#340009 = CARTESIAN_POINT('',(143.75,-113.,1.55)); +#340010 = VECTOR('',#340011,1.); +#340011 = DIRECTION('',(0.,1.,0.)); +#340012 = ORIENTED_EDGE('',*,*,#339772,.F.); +#340013 = ORIENTED_EDGE('',*,*,#340014,.F.); +#340014 = EDGE_CURVE('',#339984,#339773,#340015,.T.); +#340015 = LINE('',#340016,#340017); +#340016 = CARTESIAN_POINT('',(143.75,-113.,1.51)); +#340017 = VECTOR('',#340018,1.); +#340018 = DIRECTION('',(0.,1.,0.)); +#340019 = PLANE('',#340020); +#340020 = AXIS2_PLACEMENT_3D('',#340021,#340022,#340023); +#340021 = CARTESIAN_POINT('',(143.75,-113.,1.51)); +#340022 = DIRECTION('',(-1.,0.,0.)); +#340023 = DIRECTION('',(0.,1.,0.)); +#340024 = ADVANCED_FACE('',(#340025),#340035,.F.); +#340025 = FACE_BOUND('',#340026,.T.); +#340026 = EDGE_LOOP('',(#340027,#340028,#340029,#340030,#340031,#340032, + #340033,#340034)); +#340027 = ORIENTED_EDGE('',*,*,#339799,.T.); +#340028 = ORIENTED_EDGE('',*,*,#339831,.T.); +#340029 = ORIENTED_EDGE('',*,*,#339863,.T.); +#340030 = ORIENTED_EDGE('',*,*,#339895,.T.); +#340031 = ORIENTED_EDGE('',*,*,#339927,.T.); +#340032 = ORIENTED_EDGE('',*,*,#339959,.T.); +#340033 = ORIENTED_EDGE('',*,*,#339991,.T.); +#340034 = ORIENTED_EDGE('',*,*,#340014,.T.); +#340035 = PLANE('',#340036); +#340036 = AXIS2_PLACEMENT_3D('',#340037,#340038,#340039); +#340037 = CARTESIAN_POINT('',(0.,0.,1.51)); +#340038 = DIRECTION('',(0.,0.,1.)); +#340039 = DIRECTION('',(1.,0.,-0.)); +#340040 = ADVANCED_FACE('',(#340041),#340051,.T.); +#340041 = FACE_BOUND('',#340042,.F.); +#340042 = EDGE_LOOP('',(#340043,#340044,#340045,#340046,#340047,#340048, + #340049,#340050)); +#340043 = ORIENTED_EDGE('',*,*,#339782,.T.); +#340044 = ORIENTED_EDGE('',*,*,#339815,.T.); +#340045 = ORIENTED_EDGE('',*,*,#339846,.T.); +#340046 = ORIENTED_EDGE('',*,*,#339879,.T.); +#340047 = ORIENTED_EDGE('',*,*,#339910,.T.); +#340048 = ORIENTED_EDGE('',*,*,#339943,.T.); +#340049 = ORIENTED_EDGE('',*,*,#339974,.T.); +#340050 = ORIENTED_EDGE('',*,*,#340007,.T.); +#340051 = PLANE('',#340052); +#340052 = AXIS2_PLACEMENT_3D('',#340053,#340054,#340055); +#340053 = CARTESIAN_POINT('',(0.,0.,1.55)); +#340054 = DIRECTION('',(0.,0.,1.)); +#340055 = DIRECTION('',(1.,0.,-0.)); +#340056 = MANIFOLD_SOLID_BREP('',#340057); +#340057 = CLOSED_SHELL('',(#340058,#340098,#340129,#340160,#340182, + #340194)); +#340058 = ADVANCED_FACE('',(#340059),#340093,.T.); +#340059 = FACE_BOUND('',#340060,.T.); +#340060 = EDGE_LOOP('',(#340061,#340071,#340079,#340087)); +#340061 = ORIENTED_EDGE('',*,*,#340062,.T.); +#340062 = EDGE_CURVE('',#340063,#340065,#340067,.T.); +#340063 = VERTEX_POINT('',#340064); +#340064 = CARTESIAN_POINT('',(146.,-80.34,1.51)); +#340065 = VERTEX_POINT('',#340066); +#340066 = CARTESIAN_POINT('',(146.,-80.34,1.55)); +#340067 = LINE('',#340068,#340069); +#340068 = CARTESIAN_POINT('',(146.,-80.34,1.51)); +#340069 = VECTOR('',#340070,1.); +#340070 = DIRECTION('',(0.,0.,1.)); +#340071 = ORIENTED_EDGE('',*,*,#340072,.T.); +#340072 = EDGE_CURVE('',#340065,#340073,#340075,.T.); +#340073 = VERTEX_POINT('',#340074); +#340074 = CARTESIAN_POINT('',(146.,-79.44,1.55)); +#340075 = LINE('',#340076,#340077); +#340076 = CARTESIAN_POINT('',(146.,-80.34,1.55)); +#340077 = VECTOR('',#340078,1.); +#340078 = DIRECTION('',(0.,1.,0.)); +#340079 = ORIENTED_EDGE('',*,*,#340080,.F.); +#340080 = EDGE_CURVE('',#340081,#340073,#340083,.T.); +#340081 = VERTEX_POINT('',#340082); +#340082 = CARTESIAN_POINT('',(146.,-79.44,1.51)); +#340083 = LINE('',#340084,#340085); +#340084 = CARTESIAN_POINT('',(146.,-79.44,1.51)); +#340085 = VECTOR('',#340086,1.); +#340086 = DIRECTION('',(0.,0.,1.)); +#340087 = ORIENTED_EDGE('',*,*,#340088,.F.); +#340088 = EDGE_CURVE('',#340063,#340081,#340089,.T.); +#340089 = LINE('',#340090,#340091); +#340090 = CARTESIAN_POINT('',(146.,-80.34,1.51)); +#340091 = VECTOR('',#340092,1.); +#340092 = DIRECTION('',(0.,1.,0.)); +#340093 = PLANE('',#340094); +#340094 = AXIS2_PLACEMENT_3D('',#340095,#340096,#340097); +#340095 = CARTESIAN_POINT('',(146.,-80.34,1.51)); +#340096 = DIRECTION('',(-1.,0.,0.)); +#340097 = DIRECTION('',(0.,1.,0.)); +#340098 = ADVANCED_FACE('',(#340099),#340124,.T.); +#340099 = FACE_BOUND('',#340100,.T.); +#340100 = EDGE_LOOP('',(#340101,#340102,#340110,#340118)); +#340101 = ORIENTED_EDGE('',*,*,#340080,.T.); +#340102 = ORIENTED_EDGE('',*,*,#340103,.T.); +#340103 = EDGE_CURVE('',#340073,#340104,#340106,.T.); +#340104 = VERTEX_POINT('',#340105); +#340105 = CARTESIAN_POINT('',(147.5,-79.44,1.55)); +#340106 = LINE('',#340107,#340108); +#340107 = CARTESIAN_POINT('',(146.,-79.44,1.55)); +#340108 = VECTOR('',#340109,1.); +#340109 = DIRECTION('',(1.,0.,0.)); +#340110 = ORIENTED_EDGE('',*,*,#340111,.F.); +#340111 = EDGE_CURVE('',#340112,#340104,#340114,.T.); +#340112 = VERTEX_POINT('',#340113); +#340113 = CARTESIAN_POINT('',(147.5,-79.44,1.51)); +#340114 = LINE('',#340115,#340116); +#340115 = CARTESIAN_POINT('',(147.5,-79.44,1.51)); +#340116 = VECTOR('',#340117,1.); +#340117 = DIRECTION('',(0.,0.,1.)); +#340118 = ORIENTED_EDGE('',*,*,#340119,.F.); +#340119 = EDGE_CURVE('',#340081,#340112,#340120,.T.); +#340120 = LINE('',#340121,#340122); +#340121 = CARTESIAN_POINT('',(146.,-79.44,1.51)); +#340122 = VECTOR('',#340123,1.); +#340123 = DIRECTION('',(1.,0.,0.)); +#340124 = PLANE('',#340125); +#340125 = AXIS2_PLACEMENT_3D('',#340126,#340127,#340128); +#340126 = CARTESIAN_POINT('',(146.,-79.44,1.51)); +#340127 = DIRECTION('',(0.,1.,0.)); +#340128 = DIRECTION('',(1.,0.,0.)); +#340129 = ADVANCED_FACE('',(#340130),#340155,.T.); +#340130 = FACE_BOUND('',#340131,.T.); +#340131 = EDGE_LOOP('',(#340132,#340133,#340141,#340149)); +#340132 = ORIENTED_EDGE('',*,*,#340111,.T.); +#340133 = ORIENTED_EDGE('',*,*,#340134,.T.); +#340134 = EDGE_CURVE('',#340104,#340135,#340137,.T.); +#340135 = VERTEX_POINT('',#340136); +#340136 = CARTESIAN_POINT('',(147.5,-80.34,1.55)); +#340137 = LINE('',#340138,#340139); +#340138 = CARTESIAN_POINT('',(147.5,-79.44,1.55)); +#340139 = VECTOR('',#340140,1.); +#340140 = DIRECTION('',(0.,-1.,0.)); +#340141 = ORIENTED_EDGE('',*,*,#340142,.F.); +#340142 = EDGE_CURVE('',#340143,#340135,#340145,.T.); +#340143 = VERTEX_POINT('',#340144); +#340144 = CARTESIAN_POINT('',(147.5,-80.34,1.51)); +#340145 = LINE('',#340146,#340147); +#340146 = CARTESIAN_POINT('',(147.5,-80.34,1.51)); +#340147 = VECTOR('',#340148,1.); +#340148 = DIRECTION('',(0.,0.,1.)); +#340149 = ORIENTED_EDGE('',*,*,#340150,.F.); +#340150 = EDGE_CURVE('',#340112,#340143,#340151,.T.); +#340151 = LINE('',#340152,#340153); +#340152 = CARTESIAN_POINT('',(147.5,-79.44,1.51)); +#340153 = VECTOR('',#340154,1.); +#340154 = DIRECTION('',(0.,-1.,0.)); +#340155 = PLANE('',#340156); +#340156 = AXIS2_PLACEMENT_3D('',#340157,#340158,#340159); +#340157 = CARTESIAN_POINT('',(147.5,-79.44,1.51)); +#340158 = DIRECTION('',(1.,0.,-0.)); +#340159 = DIRECTION('',(0.,-1.,0.)); +#340160 = ADVANCED_FACE('',(#340161),#340177,.T.); +#340161 = FACE_BOUND('',#340162,.T.); +#340162 = EDGE_LOOP('',(#340163,#340164,#340170,#340171)); +#340163 = ORIENTED_EDGE('',*,*,#340142,.T.); +#340164 = ORIENTED_EDGE('',*,*,#340165,.T.); +#340165 = EDGE_CURVE('',#340135,#340065,#340166,.T.); +#340166 = LINE('',#340167,#340168); +#340167 = CARTESIAN_POINT('',(147.5,-80.34,1.55)); +#340168 = VECTOR('',#340169,1.); +#340169 = DIRECTION('',(-1.,0.,0.)); +#340170 = ORIENTED_EDGE('',*,*,#340062,.F.); +#340171 = ORIENTED_EDGE('',*,*,#340172,.F.); +#340172 = EDGE_CURVE('',#340143,#340063,#340173,.T.); +#340173 = LINE('',#340174,#340175); +#340174 = CARTESIAN_POINT('',(147.5,-80.34,1.51)); +#340175 = VECTOR('',#340176,1.); +#340176 = DIRECTION('',(-1.,0.,0.)); +#340177 = PLANE('',#340178); +#340178 = AXIS2_PLACEMENT_3D('',#340179,#340180,#340181); +#340179 = CARTESIAN_POINT('',(147.5,-80.34,1.51)); +#340180 = DIRECTION('',(0.,-1.,0.)); +#340181 = DIRECTION('',(-1.,0.,0.)); +#340182 = ADVANCED_FACE('',(#340183),#340189,.F.); +#340183 = FACE_BOUND('',#340184,.T.); +#340184 = EDGE_LOOP('',(#340185,#340186,#340187,#340188)); +#340185 = ORIENTED_EDGE('',*,*,#340088,.T.); +#340186 = ORIENTED_EDGE('',*,*,#340119,.T.); +#340187 = ORIENTED_EDGE('',*,*,#340150,.T.); +#340188 = ORIENTED_EDGE('',*,*,#340172,.T.); +#340189 = PLANE('',#340190); +#340190 = AXIS2_PLACEMENT_3D('',#340191,#340192,#340193); +#340191 = CARTESIAN_POINT('',(0.,0.,1.51)); +#340192 = DIRECTION('',(0.,0.,1.)); +#340193 = DIRECTION('',(1.,0.,-0.)); +#340194 = ADVANCED_FACE('',(#340195),#340201,.T.); +#340195 = FACE_BOUND('',#340196,.F.); +#340196 = EDGE_LOOP('',(#340197,#340198,#340199,#340200)); +#340197 = ORIENTED_EDGE('',*,*,#340072,.T.); +#340198 = ORIENTED_EDGE('',*,*,#340103,.T.); +#340199 = ORIENTED_EDGE('',*,*,#340134,.T.); +#340200 = ORIENTED_EDGE('',*,*,#340165,.T.); +#340201 = PLANE('',#340202); +#340202 = AXIS2_PLACEMENT_3D('',#340203,#340204,#340205); +#340203 = CARTESIAN_POINT('',(0.,0.,1.55)); +#340204 = DIRECTION('',(0.,0.,1.)); +#340205 = DIRECTION('',(1.,0.,-0.)); +#340206 = MANIFOLD_SOLID_BREP('',#340207); +#340207 = CLOSED_SHELL('',(#340208,#340248,#340279,#340310,#340332, + #340344)); +#340208 = ADVANCED_FACE('',(#340209),#340243,.T.); +#340209 = FACE_BOUND('',#340210,.T.); +#340210 = EDGE_LOOP('',(#340211,#340221,#340229,#340237)); +#340211 = ORIENTED_EDGE('',*,*,#340212,.T.); +#340212 = EDGE_CURVE('',#340213,#340215,#340217,.T.); +#340213 = VERTEX_POINT('',#340214); +#340214 = CARTESIAN_POINT('',(146.,-79.07,1.51)); +#340215 = VERTEX_POINT('',#340216); +#340216 = CARTESIAN_POINT('',(146.,-79.07,1.55)); +#340217 = LINE('',#340218,#340219); +#340218 = CARTESIAN_POINT('',(146.,-79.07,1.51)); +#340219 = VECTOR('',#340220,1.); +#340220 = DIRECTION('',(0.,0.,1.)); +#340221 = ORIENTED_EDGE('',*,*,#340222,.T.); +#340222 = EDGE_CURVE('',#340215,#340223,#340225,.T.); +#340223 = VERTEX_POINT('',#340224); +#340224 = CARTESIAN_POINT('',(146.,-78.17,1.55)); +#340225 = LINE('',#340226,#340227); +#340226 = CARTESIAN_POINT('',(146.,-79.07,1.55)); +#340227 = VECTOR('',#340228,1.); +#340228 = DIRECTION('',(0.,1.,0.)); +#340229 = ORIENTED_EDGE('',*,*,#340230,.F.); +#340230 = EDGE_CURVE('',#340231,#340223,#340233,.T.); +#340231 = VERTEX_POINT('',#340232); +#340232 = CARTESIAN_POINT('',(146.,-78.17,1.51)); +#340233 = LINE('',#340234,#340235); +#340234 = CARTESIAN_POINT('',(146.,-78.17,1.51)); +#340235 = VECTOR('',#340236,1.); +#340236 = DIRECTION('',(0.,0.,1.)); +#340237 = ORIENTED_EDGE('',*,*,#340238,.F.); +#340238 = EDGE_CURVE('',#340213,#340231,#340239,.T.); +#340239 = LINE('',#340240,#340241); +#340240 = CARTESIAN_POINT('',(146.,-79.07,1.51)); +#340241 = VECTOR('',#340242,1.); +#340242 = DIRECTION('',(0.,1.,0.)); +#340243 = PLANE('',#340244); +#340244 = AXIS2_PLACEMENT_3D('',#340245,#340246,#340247); +#340245 = CARTESIAN_POINT('',(146.,-79.07,1.51)); +#340246 = DIRECTION('',(-1.,0.,0.)); +#340247 = DIRECTION('',(0.,1.,0.)); +#340248 = ADVANCED_FACE('',(#340249),#340274,.T.); +#340249 = FACE_BOUND('',#340250,.T.); +#340250 = EDGE_LOOP('',(#340251,#340252,#340260,#340268)); +#340251 = ORIENTED_EDGE('',*,*,#340230,.T.); +#340252 = ORIENTED_EDGE('',*,*,#340253,.T.); +#340253 = EDGE_CURVE('',#340223,#340254,#340256,.T.); +#340254 = VERTEX_POINT('',#340255); +#340255 = CARTESIAN_POINT('',(147.5,-78.17,1.55)); +#340256 = LINE('',#340257,#340258); +#340257 = CARTESIAN_POINT('',(146.,-78.17,1.55)); +#340258 = VECTOR('',#340259,1.); +#340259 = DIRECTION('',(1.,0.,0.)); +#340260 = ORIENTED_EDGE('',*,*,#340261,.F.); +#340261 = EDGE_CURVE('',#340262,#340254,#340264,.T.); +#340262 = VERTEX_POINT('',#340263); +#340263 = CARTESIAN_POINT('',(147.5,-78.17,1.51)); +#340264 = LINE('',#340265,#340266); +#340265 = CARTESIAN_POINT('',(147.5,-78.17,1.51)); +#340266 = VECTOR('',#340267,1.); +#340267 = DIRECTION('',(0.,0.,1.)); +#340268 = ORIENTED_EDGE('',*,*,#340269,.F.); +#340269 = EDGE_CURVE('',#340231,#340262,#340270,.T.); +#340270 = LINE('',#340271,#340272); +#340271 = CARTESIAN_POINT('',(146.,-78.17,1.51)); +#340272 = VECTOR('',#340273,1.); +#340273 = DIRECTION('',(1.,0.,0.)); +#340274 = PLANE('',#340275); +#340275 = AXIS2_PLACEMENT_3D('',#340276,#340277,#340278); +#340276 = CARTESIAN_POINT('',(146.,-78.17,1.51)); +#340277 = DIRECTION('',(0.,1.,0.)); +#340278 = DIRECTION('',(1.,0.,0.)); +#340279 = ADVANCED_FACE('',(#340280),#340305,.T.); +#340280 = FACE_BOUND('',#340281,.T.); +#340281 = EDGE_LOOP('',(#340282,#340283,#340291,#340299)); +#340282 = ORIENTED_EDGE('',*,*,#340261,.T.); +#340283 = ORIENTED_EDGE('',*,*,#340284,.T.); +#340284 = EDGE_CURVE('',#340254,#340285,#340287,.T.); +#340285 = VERTEX_POINT('',#340286); +#340286 = CARTESIAN_POINT('',(147.5,-79.07,1.55)); +#340287 = LINE('',#340288,#340289); +#340288 = CARTESIAN_POINT('',(147.5,-78.17,1.55)); +#340289 = VECTOR('',#340290,1.); +#340290 = DIRECTION('',(0.,-1.,0.)); +#340291 = ORIENTED_EDGE('',*,*,#340292,.F.); +#340292 = EDGE_CURVE('',#340293,#340285,#340295,.T.); +#340293 = VERTEX_POINT('',#340294); +#340294 = CARTESIAN_POINT('',(147.5,-79.07,1.51)); +#340295 = LINE('',#340296,#340297); +#340296 = CARTESIAN_POINT('',(147.5,-79.07,1.51)); +#340297 = VECTOR('',#340298,1.); +#340298 = DIRECTION('',(0.,0.,1.)); +#340299 = ORIENTED_EDGE('',*,*,#340300,.F.); +#340300 = EDGE_CURVE('',#340262,#340293,#340301,.T.); +#340301 = LINE('',#340302,#340303); +#340302 = CARTESIAN_POINT('',(147.5,-78.17,1.51)); +#340303 = VECTOR('',#340304,1.); +#340304 = DIRECTION('',(0.,-1.,0.)); +#340305 = PLANE('',#340306); +#340306 = AXIS2_PLACEMENT_3D('',#340307,#340308,#340309); +#340307 = CARTESIAN_POINT('',(147.5,-78.17,1.51)); +#340308 = DIRECTION('',(1.,0.,-0.)); +#340309 = DIRECTION('',(0.,-1.,0.)); +#340310 = ADVANCED_FACE('',(#340311),#340327,.T.); +#340311 = FACE_BOUND('',#340312,.T.); +#340312 = EDGE_LOOP('',(#340313,#340314,#340320,#340321)); +#340313 = ORIENTED_EDGE('',*,*,#340292,.T.); +#340314 = ORIENTED_EDGE('',*,*,#340315,.T.); +#340315 = EDGE_CURVE('',#340285,#340215,#340316,.T.); +#340316 = LINE('',#340317,#340318); +#340317 = CARTESIAN_POINT('',(147.5,-79.07,1.55)); +#340318 = VECTOR('',#340319,1.); +#340319 = DIRECTION('',(-1.,0.,0.)); +#340320 = ORIENTED_EDGE('',*,*,#340212,.F.); +#340321 = ORIENTED_EDGE('',*,*,#340322,.F.); +#340322 = EDGE_CURVE('',#340293,#340213,#340323,.T.); +#340323 = LINE('',#340324,#340325); +#340324 = CARTESIAN_POINT('',(147.5,-79.07,1.51)); +#340325 = VECTOR('',#340326,1.); +#340326 = DIRECTION('',(-1.,0.,0.)); +#340327 = PLANE('',#340328); +#340328 = AXIS2_PLACEMENT_3D('',#340329,#340330,#340331); +#340329 = CARTESIAN_POINT('',(147.5,-79.07,1.51)); +#340330 = DIRECTION('',(0.,-1.,0.)); +#340331 = DIRECTION('',(-1.,0.,0.)); +#340332 = ADVANCED_FACE('',(#340333),#340339,.F.); +#340333 = FACE_BOUND('',#340334,.T.); +#340334 = EDGE_LOOP('',(#340335,#340336,#340337,#340338)); +#340335 = ORIENTED_EDGE('',*,*,#340238,.T.); +#340336 = ORIENTED_EDGE('',*,*,#340269,.T.); +#340337 = ORIENTED_EDGE('',*,*,#340300,.T.); +#340338 = ORIENTED_EDGE('',*,*,#340322,.T.); +#340339 = PLANE('',#340340); +#340340 = AXIS2_PLACEMENT_3D('',#340341,#340342,#340343); +#340341 = CARTESIAN_POINT('',(0.,0.,1.51)); +#340342 = DIRECTION('',(0.,0.,1.)); +#340343 = DIRECTION('',(1.,0.,-0.)); +#340344 = ADVANCED_FACE('',(#340345),#340351,.T.); +#340345 = FACE_BOUND('',#340346,.F.); +#340346 = EDGE_LOOP('',(#340347,#340348,#340349,#340350)); +#340347 = ORIENTED_EDGE('',*,*,#340222,.T.); +#340348 = ORIENTED_EDGE('',*,*,#340253,.T.); +#340349 = ORIENTED_EDGE('',*,*,#340284,.T.); +#340350 = ORIENTED_EDGE('',*,*,#340315,.T.); +#340351 = PLANE('',#340352); +#340352 = AXIS2_PLACEMENT_3D('',#340353,#340354,#340355); +#340353 = CARTESIAN_POINT('',(0.,0.,1.55)); +#340354 = DIRECTION('',(0.,0.,1.)); +#340355 = DIRECTION('',(1.,0.,-0.)); +#340356 = MANIFOLD_SOLID_BREP('',#340357); +#340357 = CLOSED_SHELL('',(#340358,#340400,#340431,#340464,#340495, + #340528,#340559,#340592,#340614,#340630)); +#340358 = ADVANCED_FACE('',(#340359),#340395,.T.); +#340359 = FACE_BOUND('',#340360,.T.); +#340360 = EDGE_LOOP('',(#340361,#340371,#340380,#340388)); +#340361 = ORIENTED_EDGE('',*,*,#340362,.T.); +#340362 = EDGE_CURVE('',#340363,#340365,#340367,.T.); +#340363 = VERTEX_POINT('',#340364); +#340364 = CARTESIAN_POINT('',(123.25,-120.75,1.51)); +#340365 = VERTEX_POINT('',#340366); +#340366 = CARTESIAN_POINT('',(123.25,-120.75,1.55)); +#340367 = LINE('',#340368,#340369); +#340368 = CARTESIAN_POINT('',(123.25,-120.75,1.51)); +#340369 = VECTOR('',#340370,1.); +#340370 = DIRECTION('',(0.,0.,1.)); +#340371 = ORIENTED_EDGE('',*,*,#340372,.T.); +#340372 = EDGE_CURVE('',#340365,#340373,#340375,.T.); +#340373 = VERTEX_POINT('',#340374); +#340374 = CARTESIAN_POINT('',(123.75,-120.25,1.55)); +#340375 = CIRCLE('',#340376,0.500001333575); +#340376 = AXIS2_PLACEMENT_3D('',#340377,#340378,#340379); +#340377 = CARTESIAN_POINT('',(123.75000133357,-120.7500013335,1.55)); +#340378 = DIRECTION('',(0.,0.,-1.)); +#340379 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340380 = ORIENTED_EDGE('',*,*,#340381,.F.); +#340381 = EDGE_CURVE('',#340382,#340373,#340384,.T.); +#340382 = VERTEX_POINT('',#340383); +#340383 = CARTESIAN_POINT('',(123.75,-120.25,1.51)); +#340384 = LINE('',#340385,#340386); +#340385 = CARTESIAN_POINT('',(123.75,-120.25,1.51)); +#340386 = VECTOR('',#340387,1.); +#340387 = DIRECTION('',(0.,0.,1.)); +#340388 = ORIENTED_EDGE('',*,*,#340389,.F.); +#340389 = EDGE_CURVE('',#340363,#340382,#340390,.T.); +#340390 = CIRCLE('',#340391,0.500001333575); +#340391 = AXIS2_PLACEMENT_3D('',#340392,#340393,#340394); +#340392 = CARTESIAN_POINT('',(123.75000133357,-120.7500013335,1.51)); +#340393 = DIRECTION('',(0.,0.,-1.)); +#340394 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340395 = CYLINDRICAL_SURFACE('',#340396,0.500001333575); +#340396 = AXIS2_PLACEMENT_3D('',#340397,#340398,#340399); +#340397 = CARTESIAN_POINT('',(123.75000133357,-120.7500013335,1.51)); +#340398 = DIRECTION('',(0.,0.,-1.)); +#340399 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340400 = ADVANCED_FACE('',(#340401),#340426,.T.); +#340401 = FACE_BOUND('',#340402,.T.); +#340402 = EDGE_LOOP('',(#340403,#340404,#340412,#340420)); +#340403 = ORIENTED_EDGE('',*,*,#340381,.T.); +#340404 = ORIENTED_EDGE('',*,*,#340405,.T.); +#340405 = EDGE_CURVE('',#340373,#340406,#340408,.T.); +#340406 = VERTEX_POINT('',#340407); +#340407 = CARTESIAN_POINT('',(124.75,-120.25,1.55)); +#340408 = LINE('',#340409,#340410); +#340409 = CARTESIAN_POINT('',(123.75,-120.25,1.55)); +#340410 = VECTOR('',#340411,1.); +#340411 = DIRECTION('',(1.,0.,0.)); +#340412 = ORIENTED_EDGE('',*,*,#340413,.F.); +#340413 = EDGE_CURVE('',#340414,#340406,#340416,.T.); +#340414 = VERTEX_POINT('',#340415); +#340415 = CARTESIAN_POINT('',(124.75,-120.25,1.51)); +#340416 = LINE('',#340417,#340418); +#340417 = CARTESIAN_POINT('',(124.75,-120.25,1.51)); +#340418 = VECTOR('',#340419,1.); +#340419 = DIRECTION('',(0.,0.,1.)); +#340420 = ORIENTED_EDGE('',*,*,#340421,.F.); +#340421 = EDGE_CURVE('',#340382,#340414,#340422,.T.); +#340422 = LINE('',#340423,#340424); +#340423 = CARTESIAN_POINT('',(123.75,-120.25,1.51)); +#340424 = VECTOR('',#340425,1.); +#340425 = DIRECTION('',(1.,0.,0.)); +#340426 = PLANE('',#340427); +#340427 = AXIS2_PLACEMENT_3D('',#340428,#340429,#340430); +#340428 = CARTESIAN_POINT('',(123.75,-120.25,1.51)); +#340429 = DIRECTION('',(0.,1.,0.)); +#340430 = DIRECTION('',(1.,0.,0.)); +#340431 = ADVANCED_FACE('',(#340432),#340459,.T.); +#340432 = FACE_BOUND('',#340433,.T.); +#340433 = EDGE_LOOP('',(#340434,#340435,#340444,#340452)); +#340434 = ORIENTED_EDGE('',*,*,#340413,.T.); +#340435 = ORIENTED_EDGE('',*,*,#340436,.T.); +#340436 = EDGE_CURVE('',#340406,#340437,#340439,.T.); +#340437 = VERTEX_POINT('',#340438); +#340438 = CARTESIAN_POINT('',(125.25,-120.75,1.55)); +#340439 = CIRCLE('',#340440,0.500001333575); +#340440 = AXIS2_PLACEMENT_3D('',#340441,#340442,#340443); +#340441 = CARTESIAN_POINT('',(124.74999866642,-120.7500013335,1.55)); +#340442 = DIRECTION('',(0.,0.,-1.)); +#340443 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340444 = ORIENTED_EDGE('',*,*,#340445,.F.); +#340445 = EDGE_CURVE('',#340446,#340437,#340448,.T.); +#340446 = VERTEX_POINT('',#340447); +#340447 = CARTESIAN_POINT('',(125.25,-120.75,1.51)); +#340448 = LINE('',#340449,#340450); +#340449 = CARTESIAN_POINT('',(125.25,-120.75,1.51)); +#340450 = VECTOR('',#340451,1.); +#340451 = DIRECTION('',(0.,0.,1.)); +#340452 = ORIENTED_EDGE('',*,*,#340453,.F.); +#340453 = EDGE_CURVE('',#340414,#340446,#340454,.T.); +#340454 = CIRCLE('',#340455,0.500001333575); +#340455 = AXIS2_PLACEMENT_3D('',#340456,#340457,#340458); +#340456 = CARTESIAN_POINT('',(124.74999866642,-120.7500013335,1.51)); +#340457 = DIRECTION('',(0.,0.,-1.)); +#340458 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340459 = CYLINDRICAL_SURFACE('',#340460,0.500001333575); +#340460 = AXIS2_PLACEMENT_3D('',#340461,#340462,#340463); +#340461 = CARTESIAN_POINT('',(124.74999866642,-120.7500013335,1.51)); +#340462 = DIRECTION('',(0.,0.,-1.)); +#340463 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340464 = ADVANCED_FACE('',(#340465),#340490,.T.); +#340465 = FACE_BOUND('',#340466,.T.); +#340466 = EDGE_LOOP('',(#340467,#340468,#340476,#340484)); +#340467 = ORIENTED_EDGE('',*,*,#340445,.T.); +#340468 = ORIENTED_EDGE('',*,*,#340469,.T.); +#340469 = EDGE_CURVE('',#340437,#340470,#340472,.T.); +#340470 = VERTEX_POINT('',#340471); +#340471 = CARTESIAN_POINT('',(125.25,-121.75,1.55)); +#340472 = LINE('',#340473,#340474); +#340473 = CARTESIAN_POINT('',(125.25,-120.75,1.55)); +#340474 = VECTOR('',#340475,1.); +#340475 = DIRECTION('',(0.,-1.,0.)); +#340476 = ORIENTED_EDGE('',*,*,#340477,.F.); +#340477 = EDGE_CURVE('',#340478,#340470,#340480,.T.); +#340478 = VERTEX_POINT('',#340479); +#340479 = CARTESIAN_POINT('',(125.25,-121.75,1.51)); +#340480 = LINE('',#340481,#340482); +#340481 = CARTESIAN_POINT('',(125.25,-121.75,1.51)); +#340482 = VECTOR('',#340483,1.); +#340483 = DIRECTION('',(0.,0.,1.)); +#340484 = ORIENTED_EDGE('',*,*,#340485,.F.); +#340485 = EDGE_CURVE('',#340446,#340478,#340486,.T.); +#340486 = LINE('',#340487,#340488); +#340487 = CARTESIAN_POINT('',(125.25,-120.75,1.51)); +#340488 = VECTOR('',#340489,1.); +#340489 = DIRECTION('',(0.,-1.,0.)); +#340490 = PLANE('',#340491); +#340491 = AXIS2_PLACEMENT_3D('',#340492,#340493,#340494); +#340492 = CARTESIAN_POINT('',(125.25,-120.75,1.51)); +#340493 = DIRECTION('',(1.,0.,-0.)); +#340494 = DIRECTION('',(0.,-1.,0.)); +#340495 = ADVANCED_FACE('',(#340496),#340523,.T.); +#340496 = FACE_BOUND('',#340497,.T.); +#340497 = EDGE_LOOP('',(#340498,#340499,#340508,#340516)); +#340498 = ORIENTED_EDGE('',*,*,#340477,.T.); +#340499 = ORIENTED_EDGE('',*,*,#340500,.T.); +#340500 = EDGE_CURVE('',#340470,#340501,#340503,.T.); +#340501 = VERTEX_POINT('',#340502); +#340502 = CARTESIAN_POINT('',(124.75,-122.25,1.55)); +#340503 = CIRCLE('',#340504,0.500001333575); +#340504 = AXIS2_PLACEMENT_3D('',#340505,#340506,#340507); +#340505 = CARTESIAN_POINT('',(124.74999866642,-121.7499986664,1.55)); +#340506 = DIRECTION('',(0.,0.,-1.)); +#340507 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340508 = ORIENTED_EDGE('',*,*,#340509,.F.); +#340509 = EDGE_CURVE('',#340510,#340501,#340512,.T.); +#340510 = VERTEX_POINT('',#340511); +#340511 = CARTESIAN_POINT('',(124.75,-122.25,1.51)); +#340512 = LINE('',#340513,#340514); +#340513 = CARTESIAN_POINT('',(124.75,-122.25,1.51)); +#340514 = VECTOR('',#340515,1.); +#340515 = DIRECTION('',(0.,0.,1.)); +#340516 = ORIENTED_EDGE('',*,*,#340517,.F.); +#340517 = EDGE_CURVE('',#340478,#340510,#340518,.T.); +#340518 = CIRCLE('',#340519,0.500001333575); +#340519 = AXIS2_PLACEMENT_3D('',#340520,#340521,#340522); +#340520 = CARTESIAN_POINT('',(124.74999866642,-121.7499986664,1.51)); +#340521 = DIRECTION('',(0.,0.,-1.)); +#340522 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340523 = CYLINDRICAL_SURFACE('',#340524,0.500001333575); +#340524 = AXIS2_PLACEMENT_3D('',#340525,#340526,#340527); +#340525 = CARTESIAN_POINT('',(124.74999866642,-121.7499986664,1.51)); +#340526 = DIRECTION('',(0.,0.,-1.)); +#340527 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340528 = ADVANCED_FACE('',(#340529),#340554,.T.); +#340529 = FACE_BOUND('',#340530,.T.); +#340530 = EDGE_LOOP('',(#340531,#340532,#340540,#340548)); +#340531 = ORIENTED_EDGE('',*,*,#340509,.T.); +#340532 = ORIENTED_EDGE('',*,*,#340533,.T.); +#340533 = EDGE_CURVE('',#340501,#340534,#340536,.T.); +#340534 = VERTEX_POINT('',#340535); +#340535 = CARTESIAN_POINT('',(123.75,-122.25,1.55)); +#340536 = LINE('',#340537,#340538); +#340537 = CARTESIAN_POINT('',(124.75,-122.25,1.55)); +#340538 = VECTOR('',#340539,1.); +#340539 = DIRECTION('',(-1.,0.,0.)); +#340540 = ORIENTED_EDGE('',*,*,#340541,.F.); +#340541 = EDGE_CURVE('',#340542,#340534,#340544,.T.); +#340542 = VERTEX_POINT('',#340543); +#340543 = CARTESIAN_POINT('',(123.75,-122.25,1.51)); +#340544 = LINE('',#340545,#340546); +#340545 = CARTESIAN_POINT('',(123.75,-122.25,1.51)); +#340546 = VECTOR('',#340547,1.); +#340547 = DIRECTION('',(0.,0.,1.)); +#340548 = ORIENTED_EDGE('',*,*,#340549,.F.); +#340549 = EDGE_CURVE('',#340510,#340542,#340550,.T.); +#340550 = LINE('',#340551,#340552); +#340551 = CARTESIAN_POINT('',(124.75,-122.25,1.51)); +#340552 = VECTOR('',#340553,1.); +#340553 = DIRECTION('',(-1.,0.,0.)); +#340554 = PLANE('',#340555); +#340555 = AXIS2_PLACEMENT_3D('',#340556,#340557,#340558); +#340556 = CARTESIAN_POINT('',(124.75,-122.25,1.51)); +#340557 = DIRECTION('',(0.,-1.,0.)); +#340558 = DIRECTION('',(-1.,0.,0.)); +#340559 = ADVANCED_FACE('',(#340560),#340587,.T.); +#340560 = FACE_BOUND('',#340561,.T.); +#340561 = EDGE_LOOP('',(#340562,#340563,#340572,#340580)); +#340562 = ORIENTED_EDGE('',*,*,#340541,.T.); +#340563 = ORIENTED_EDGE('',*,*,#340564,.T.); +#340564 = EDGE_CURVE('',#340534,#340565,#340567,.T.); +#340565 = VERTEX_POINT('',#340566); +#340566 = CARTESIAN_POINT('',(123.25,-121.75,1.55)); +#340567 = CIRCLE('',#340568,0.500001333575); +#340568 = AXIS2_PLACEMENT_3D('',#340569,#340570,#340571); +#340569 = CARTESIAN_POINT('',(123.75000133357,-121.7499986664,1.55)); +#340570 = DIRECTION('',(0.,0.,-1.)); +#340571 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340572 = ORIENTED_EDGE('',*,*,#340573,.F.); +#340573 = EDGE_CURVE('',#340574,#340565,#340576,.T.); +#340574 = VERTEX_POINT('',#340575); +#340575 = CARTESIAN_POINT('',(123.25,-121.75,1.51)); +#340576 = LINE('',#340577,#340578); +#340577 = CARTESIAN_POINT('',(123.25,-121.75,1.51)); +#340578 = VECTOR('',#340579,1.); +#340579 = DIRECTION('',(0.,0.,1.)); +#340580 = ORIENTED_EDGE('',*,*,#340581,.F.); +#340581 = EDGE_CURVE('',#340542,#340574,#340582,.T.); +#340582 = CIRCLE('',#340583,0.500001333575); +#340583 = AXIS2_PLACEMENT_3D('',#340584,#340585,#340586); +#340584 = CARTESIAN_POINT('',(123.75000133357,-121.7499986664,1.51)); +#340585 = DIRECTION('',(0.,0.,-1.)); +#340586 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340587 = CYLINDRICAL_SURFACE('',#340588,0.500001333575); +#340588 = AXIS2_PLACEMENT_3D('',#340589,#340590,#340591); +#340589 = CARTESIAN_POINT('',(123.75000133357,-121.7499986664,1.51)); +#340590 = DIRECTION('',(0.,0.,-1.)); +#340591 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340592 = ADVANCED_FACE('',(#340593),#340609,.T.); +#340593 = FACE_BOUND('',#340594,.T.); +#340594 = EDGE_LOOP('',(#340595,#340596,#340602,#340603)); +#340595 = ORIENTED_EDGE('',*,*,#340573,.T.); +#340596 = ORIENTED_EDGE('',*,*,#340597,.T.); +#340597 = EDGE_CURVE('',#340565,#340365,#340598,.T.); +#340598 = LINE('',#340599,#340600); +#340599 = CARTESIAN_POINT('',(123.25,-121.75,1.55)); +#340600 = VECTOR('',#340601,1.); +#340601 = DIRECTION('',(0.,1.,0.)); +#340602 = ORIENTED_EDGE('',*,*,#340362,.F.); +#340603 = ORIENTED_EDGE('',*,*,#340604,.F.); +#340604 = EDGE_CURVE('',#340574,#340363,#340605,.T.); +#340605 = LINE('',#340606,#340607); +#340606 = CARTESIAN_POINT('',(123.25,-121.75,1.51)); +#340607 = VECTOR('',#340608,1.); +#340608 = DIRECTION('',(0.,1.,0.)); +#340609 = PLANE('',#340610); +#340610 = AXIS2_PLACEMENT_3D('',#340611,#340612,#340613); +#340611 = CARTESIAN_POINT('',(123.25,-121.75,1.51)); +#340612 = DIRECTION('',(-1.,0.,0.)); +#340613 = DIRECTION('',(0.,1.,0.)); +#340614 = ADVANCED_FACE('',(#340615),#340625,.F.); +#340615 = FACE_BOUND('',#340616,.T.); +#340616 = EDGE_LOOP('',(#340617,#340618,#340619,#340620,#340621,#340622, + #340623,#340624)); +#340617 = ORIENTED_EDGE('',*,*,#340389,.T.); +#340618 = ORIENTED_EDGE('',*,*,#340421,.T.); +#340619 = ORIENTED_EDGE('',*,*,#340453,.T.); +#340620 = ORIENTED_EDGE('',*,*,#340485,.T.); +#340621 = ORIENTED_EDGE('',*,*,#340517,.T.); +#340622 = ORIENTED_EDGE('',*,*,#340549,.T.); +#340623 = ORIENTED_EDGE('',*,*,#340581,.T.); +#340624 = ORIENTED_EDGE('',*,*,#340604,.T.); +#340625 = PLANE('',#340626); +#340626 = AXIS2_PLACEMENT_3D('',#340627,#340628,#340629); +#340627 = CARTESIAN_POINT('',(0.,0.,1.51)); +#340628 = DIRECTION('',(0.,0.,1.)); +#340629 = DIRECTION('',(1.,0.,-0.)); +#340630 = ADVANCED_FACE('',(#340631),#340641,.T.); +#340631 = FACE_BOUND('',#340632,.F.); +#340632 = EDGE_LOOP('',(#340633,#340634,#340635,#340636,#340637,#340638, + #340639,#340640)); +#340633 = ORIENTED_EDGE('',*,*,#340372,.T.); +#340634 = ORIENTED_EDGE('',*,*,#340405,.T.); +#340635 = ORIENTED_EDGE('',*,*,#340436,.T.); +#340636 = ORIENTED_EDGE('',*,*,#340469,.T.); +#340637 = ORIENTED_EDGE('',*,*,#340500,.T.); +#340638 = ORIENTED_EDGE('',*,*,#340533,.T.); +#340639 = ORIENTED_EDGE('',*,*,#340564,.T.); +#340640 = ORIENTED_EDGE('',*,*,#340597,.T.); +#340641 = PLANE('',#340642); +#340642 = AXIS2_PLACEMENT_3D('',#340643,#340644,#340645); +#340643 = CARTESIAN_POINT('',(0.,0.,1.55)); +#340644 = DIRECTION('',(0.,0.,1.)); +#340645 = DIRECTION('',(1.,0.,-0.)); +#340646 = MANIFOLD_SOLID_BREP('',#340647); +#340647 = CLOSED_SHELL('',(#340648,#340690,#340721,#340754,#340785, + #340818,#340849,#340882,#340904,#340920)); +#340648 = ADVANCED_FACE('',(#340649),#340685,.T.); +#340649 = FACE_BOUND('',#340650,.T.); +#340650 = EDGE_LOOP('',(#340651,#340661,#340670,#340678)); +#340651 = ORIENTED_EDGE('',*,*,#340652,.T.); +#340652 = EDGE_CURVE('',#340653,#340655,#340657,.T.); +#340653 = VERTEX_POINT('',#340654); +#340654 = CARTESIAN_POINT('',(133.5,-120.75,1.51)); +#340655 = VERTEX_POINT('',#340656); +#340656 = CARTESIAN_POINT('',(133.5,-120.75,1.55)); +#340657 = LINE('',#340658,#340659); +#340658 = CARTESIAN_POINT('',(133.5,-120.75,1.51)); +#340659 = VECTOR('',#340660,1.); +#340660 = DIRECTION('',(0.,0.,1.)); +#340661 = ORIENTED_EDGE('',*,*,#340662,.T.); +#340662 = EDGE_CURVE('',#340655,#340663,#340665,.T.); +#340663 = VERTEX_POINT('',#340664); +#340664 = CARTESIAN_POINT('',(134.,-120.25,1.55)); +#340665 = CIRCLE('',#340666,0.500001333575); +#340666 = AXIS2_PLACEMENT_3D('',#340667,#340668,#340669); +#340667 = CARTESIAN_POINT('',(134.00000133357,-120.7500013335,1.55)); +#340668 = DIRECTION('',(0.,0.,-1.)); +#340669 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340670 = ORIENTED_EDGE('',*,*,#340671,.F.); +#340671 = EDGE_CURVE('',#340672,#340663,#340674,.T.); +#340672 = VERTEX_POINT('',#340673); +#340673 = CARTESIAN_POINT('',(134.,-120.25,1.51)); +#340674 = LINE('',#340675,#340676); +#340675 = CARTESIAN_POINT('',(134.,-120.25,1.51)); +#340676 = VECTOR('',#340677,1.); +#340677 = DIRECTION('',(0.,0.,1.)); +#340678 = ORIENTED_EDGE('',*,*,#340679,.F.); +#340679 = EDGE_CURVE('',#340653,#340672,#340680,.T.); +#340680 = CIRCLE('',#340681,0.500001333575); +#340681 = AXIS2_PLACEMENT_3D('',#340682,#340683,#340684); +#340682 = CARTESIAN_POINT('',(134.00000133357,-120.7500013335,1.51)); +#340683 = DIRECTION('',(0.,0.,-1.)); +#340684 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340685 = CYLINDRICAL_SURFACE('',#340686,0.500001333575); +#340686 = AXIS2_PLACEMENT_3D('',#340687,#340688,#340689); +#340687 = CARTESIAN_POINT('',(134.00000133357,-120.7500013335,1.51)); +#340688 = DIRECTION('',(0.,0.,-1.)); +#340689 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#340690 = ADVANCED_FACE('',(#340691),#340716,.T.); +#340691 = FACE_BOUND('',#340692,.T.); +#340692 = EDGE_LOOP('',(#340693,#340694,#340702,#340710)); +#340693 = ORIENTED_EDGE('',*,*,#340671,.T.); +#340694 = ORIENTED_EDGE('',*,*,#340695,.T.); +#340695 = EDGE_CURVE('',#340663,#340696,#340698,.T.); +#340696 = VERTEX_POINT('',#340697); +#340697 = CARTESIAN_POINT('',(135.,-120.25,1.55)); +#340698 = LINE('',#340699,#340700); +#340699 = CARTESIAN_POINT('',(134.,-120.25,1.55)); +#340700 = VECTOR('',#340701,1.); +#340701 = DIRECTION('',(1.,0.,0.)); +#340702 = ORIENTED_EDGE('',*,*,#340703,.F.); +#340703 = EDGE_CURVE('',#340704,#340696,#340706,.T.); +#340704 = VERTEX_POINT('',#340705); +#340705 = CARTESIAN_POINT('',(135.,-120.25,1.51)); +#340706 = LINE('',#340707,#340708); +#340707 = CARTESIAN_POINT('',(135.,-120.25,1.51)); +#340708 = VECTOR('',#340709,1.); +#340709 = DIRECTION('',(0.,0.,1.)); +#340710 = ORIENTED_EDGE('',*,*,#340711,.F.); +#340711 = EDGE_CURVE('',#340672,#340704,#340712,.T.); +#340712 = LINE('',#340713,#340714); +#340713 = CARTESIAN_POINT('',(134.,-120.25,1.51)); +#340714 = VECTOR('',#340715,1.); +#340715 = DIRECTION('',(1.,0.,0.)); +#340716 = PLANE('',#340717); +#340717 = AXIS2_PLACEMENT_3D('',#340718,#340719,#340720); +#340718 = CARTESIAN_POINT('',(134.,-120.25,1.51)); +#340719 = DIRECTION('',(0.,1.,0.)); +#340720 = DIRECTION('',(1.,0.,0.)); +#340721 = ADVANCED_FACE('',(#340722),#340749,.T.); +#340722 = FACE_BOUND('',#340723,.T.); +#340723 = EDGE_LOOP('',(#340724,#340725,#340734,#340742)); +#340724 = ORIENTED_EDGE('',*,*,#340703,.T.); +#340725 = ORIENTED_EDGE('',*,*,#340726,.T.); +#340726 = EDGE_CURVE('',#340696,#340727,#340729,.T.); +#340727 = VERTEX_POINT('',#340728); +#340728 = CARTESIAN_POINT('',(135.5,-120.75,1.55)); +#340729 = CIRCLE('',#340730,0.500001333575); +#340730 = AXIS2_PLACEMENT_3D('',#340731,#340732,#340733); +#340731 = CARTESIAN_POINT('',(134.99999866642,-120.7500013335,1.55)); +#340732 = DIRECTION('',(0.,0.,-1.)); +#340733 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340734 = ORIENTED_EDGE('',*,*,#340735,.F.); +#340735 = EDGE_CURVE('',#340736,#340727,#340738,.T.); +#340736 = VERTEX_POINT('',#340737); +#340737 = CARTESIAN_POINT('',(135.5,-120.75,1.51)); +#340738 = LINE('',#340739,#340740); +#340739 = CARTESIAN_POINT('',(135.5,-120.75,1.51)); +#340740 = VECTOR('',#340741,1.); +#340741 = DIRECTION('',(0.,0.,1.)); +#340742 = ORIENTED_EDGE('',*,*,#340743,.F.); +#340743 = EDGE_CURVE('',#340704,#340736,#340744,.T.); +#340744 = CIRCLE('',#340745,0.500001333575); +#340745 = AXIS2_PLACEMENT_3D('',#340746,#340747,#340748); +#340746 = CARTESIAN_POINT('',(134.99999866642,-120.7500013335,1.51)); +#340747 = DIRECTION('',(0.,0.,-1.)); +#340748 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340749 = CYLINDRICAL_SURFACE('',#340750,0.500001333575); +#340750 = AXIS2_PLACEMENT_3D('',#340751,#340752,#340753); +#340751 = CARTESIAN_POINT('',(134.99999866642,-120.7500013335,1.51)); +#340752 = DIRECTION('',(0.,0.,-1.)); +#340753 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#340754 = ADVANCED_FACE('',(#340755),#340780,.T.); +#340755 = FACE_BOUND('',#340756,.T.); +#340756 = EDGE_LOOP('',(#340757,#340758,#340766,#340774)); +#340757 = ORIENTED_EDGE('',*,*,#340735,.T.); +#340758 = ORIENTED_EDGE('',*,*,#340759,.T.); +#340759 = EDGE_CURVE('',#340727,#340760,#340762,.T.); +#340760 = VERTEX_POINT('',#340761); +#340761 = CARTESIAN_POINT('',(135.5,-121.75,1.55)); +#340762 = LINE('',#340763,#340764); +#340763 = CARTESIAN_POINT('',(135.5,-120.75,1.55)); +#340764 = VECTOR('',#340765,1.); +#340765 = DIRECTION('',(0.,-1.,0.)); +#340766 = ORIENTED_EDGE('',*,*,#340767,.F.); +#340767 = EDGE_CURVE('',#340768,#340760,#340770,.T.); +#340768 = VERTEX_POINT('',#340769); +#340769 = CARTESIAN_POINT('',(135.5,-121.75,1.51)); +#340770 = LINE('',#340771,#340772); +#340771 = CARTESIAN_POINT('',(135.5,-121.75,1.51)); +#340772 = VECTOR('',#340773,1.); +#340773 = DIRECTION('',(0.,0.,1.)); +#340774 = ORIENTED_EDGE('',*,*,#340775,.F.); +#340775 = EDGE_CURVE('',#340736,#340768,#340776,.T.); +#340776 = LINE('',#340777,#340778); +#340777 = CARTESIAN_POINT('',(135.5,-120.75,1.51)); +#340778 = VECTOR('',#340779,1.); +#340779 = DIRECTION('',(0.,-1.,0.)); +#340780 = PLANE('',#340781); +#340781 = AXIS2_PLACEMENT_3D('',#340782,#340783,#340784); +#340782 = CARTESIAN_POINT('',(135.5,-120.75,1.51)); +#340783 = DIRECTION('',(1.,0.,-0.)); +#340784 = DIRECTION('',(0.,-1.,0.)); +#340785 = ADVANCED_FACE('',(#340786),#340813,.T.); +#340786 = FACE_BOUND('',#340787,.T.); +#340787 = EDGE_LOOP('',(#340788,#340789,#340798,#340806)); +#340788 = ORIENTED_EDGE('',*,*,#340767,.T.); +#340789 = ORIENTED_EDGE('',*,*,#340790,.T.); +#340790 = EDGE_CURVE('',#340760,#340791,#340793,.T.); +#340791 = VERTEX_POINT('',#340792); +#340792 = CARTESIAN_POINT('',(135.,-122.25,1.55)); +#340793 = CIRCLE('',#340794,0.500001333575); +#340794 = AXIS2_PLACEMENT_3D('',#340795,#340796,#340797); +#340795 = CARTESIAN_POINT('',(134.99999866642,-121.7499986664,1.55)); +#340796 = DIRECTION('',(0.,0.,-1.)); +#340797 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340798 = ORIENTED_EDGE('',*,*,#340799,.F.); +#340799 = EDGE_CURVE('',#340800,#340791,#340802,.T.); +#340800 = VERTEX_POINT('',#340801); +#340801 = CARTESIAN_POINT('',(135.,-122.25,1.51)); +#340802 = LINE('',#340803,#340804); +#340803 = CARTESIAN_POINT('',(135.,-122.25,1.51)); +#340804 = VECTOR('',#340805,1.); +#340805 = DIRECTION('',(0.,0.,1.)); +#340806 = ORIENTED_EDGE('',*,*,#340807,.F.); +#340807 = EDGE_CURVE('',#340768,#340800,#340808,.T.); +#340808 = CIRCLE('',#340809,0.500001333575); +#340809 = AXIS2_PLACEMENT_3D('',#340810,#340811,#340812); +#340810 = CARTESIAN_POINT('',(134.99999866642,-121.7499986664,1.51)); +#340811 = DIRECTION('',(0.,0.,-1.)); +#340812 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340813 = CYLINDRICAL_SURFACE('',#340814,0.500001333575); +#340814 = AXIS2_PLACEMENT_3D('',#340815,#340816,#340817); +#340815 = CARTESIAN_POINT('',(134.99999866642,-121.7499986664,1.51)); +#340816 = DIRECTION('',(0.,0.,-1.)); +#340817 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#340818 = ADVANCED_FACE('',(#340819),#340844,.T.); +#340819 = FACE_BOUND('',#340820,.T.); +#340820 = EDGE_LOOP('',(#340821,#340822,#340830,#340838)); +#340821 = ORIENTED_EDGE('',*,*,#340799,.T.); +#340822 = ORIENTED_EDGE('',*,*,#340823,.T.); +#340823 = EDGE_CURVE('',#340791,#340824,#340826,.T.); +#340824 = VERTEX_POINT('',#340825); +#340825 = CARTESIAN_POINT('',(134.,-122.25,1.55)); +#340826 = LINE('',#340827,#340828); +#340827 = CARTESIAN_POINT('',(135.,-122.25,1.55)); +#340828 = VECTOR('',#340829,1.); +#340829 = DIRECTION('',(-1.,0.,0.)); +#340830 = ORIENTED_EDGE('',*,*,#340831,.F.); +#340831 = EDGE_CURVE('',#340832,#340824,#340834,.T.); +#340832 = VERTEX_POINT('',#340833); +#340833 = CARTESIAN_POINT('',(134.,-122.25,1.51)); +#340834 = LINE('',#340835,#340836); +#340835 = CARTESIAN_POINT('',(134.,-122.25,1.51)); +#340836 = VECTOR('',#340837,1.); +#340837 = DIRECTION('',(0.,0.,1.)); +#340838 = ORIENTED_EDGE('',*,*,#340839,.F.); +#340839 = EDGE_CURVE('',#340800,#340832,#340840,.T.); +#340840 = LINE('',#340841,#340842); +#340841 = CARTESIAN_POINT('',(135.,-122.25,1.51)); +#340842 = VECTOR('',#340843,1.); +#340843 = DIRECTION('',(-1.,0.,0.)); +#340844 = PLANE('',#340845); +#340845 = AXIS2_PLACEMENT_3D('',#340846,#340847,#340848); +#340846 = CARTESIAN_POINT('',(135.,-122.25,1.51)); +#340847 = DIRECTION('',(0.,-1.,0.)); +#340848 = DIRECTION('',(-1.,0.,0.)); +#340849 = ADVANCED_FACE('',(#340850),#340877,.T.); +#340850 = FACE_BOUND('',#340851,.T.); +#340851 = EDGE_LOOP('',(#340852,#340853,#340862,#340870)); +#340852 = ORIENTED_EDGE('',*,*,#340831,.T.); +#340853 = ORIENTED_EDGE('',*,*,#340854,.T.); +#340854 = EDGE_CURVE('',#340824,#340855,#340857,.T.); +#340855 = VERTEX_POINT('',#340856); +#340856 = CARTESIAN_POINT('',(133.5,-121.75,1.55)); +#340857 = CIRCLE('',#340858,0.500001333575); +#340858 = AXIS2_PLACEMENT_3D('',#340859,#340860,#340861); +#340859 = CARTESIAN_POINT('',(134.00000133357,-121.7499986664,1.55)); +#340860 = DIRECTION('',(0.,0.,-1.)); +#340861 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340862 = ORIENTED_EDGE('',*,*,#340863,.F.); +#340863 = EDGE_CURVE('',#340864,#340855,#340866,.T.); +#340864 = VERTEX_POINT('',#340865); +#340865 = CARTESIAN_POINT('',(133.5,-121.75,1.51)); +#340866 = LINE('',#340867,#340868); +#340867 = CARTESIAN_POINT('',(133.5,-121.75,1.51)); +#340868 = VECTOR('',#340869,1.); +#340869 = DIRECTION('',(0.,0.,1.)); +#340870 = ORIENTED_EDGE('',*,*,#340871,.F.); +#340871 = EDGE_CURVE('',#340832,#340864,#340872,.T.); +#340872 = CIRCLE('',#340873,0.500001333575); +#340873 = AXIS2_PLACEMENT_3D('',#340874,#340875,#340876); +#340874 = CARTESIAN_POINT('',(134.00000133357,-121.7499986664,1.51)); +#340875 = DIRECTION('',(0.,0.,-1.)); +#340876 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340877 = CYLINDRICAL_SURFACE('',#340878,0.500001333575); +#340878 = AXIS2_PLACEMENT_3D('',#340879,#340880,#340881); +#340879 = CARTESIAN_POINT('',(134.00000133357,-121.7499986664,1.51)); +#340880 = DIRECTION('',(0.,0.,-1.)); +#340881 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#340882 = ADVANCED_FACE('',(#340883),#340899,.T.); +#340883 = FACE_BOUND('',#340884,.T.); +#340884 = EDGE_LOOP('',(#340885,#340886,#340892,#340893)); +#340885 = ORIENTED_EDGE('',*,*,#340863,.T.); +#340886 = ORIENTED_EDGE('',*,*,#340887,.T.); +#340887 = EDGE_CURVE('',#340855,#340655,#340888,.T.); +#340888 = LINE('',#340889,#340890); +#340889 = CARTESIAN_POINT('',(133.5,-121.75,1.55)); +#340890 = VECTOR('',#340891,1.); +#340891 = DIRECTION('',(0.,1.,0.)); +#340892 = ORIENTED_EDGE('',*,*,#340652,.F.); +#340893 = ORIENTED_EDGE('',*,*,#340894,.F.); +#340894 = EDGE_CURVE('',#340864,#340653,#340895,.T.); +#340895 = LINE('',#340896,#340897); +#340896 = CARTESIAN_POINT('',(133.5,-121.75,1.51)); +#340897 = VECTOR('',#340898,1.); +#340898 = DIRECTION('',(0.,1.,0.)); +#340899 = PLANE('',#340900); +#340900 = AXIS2_PLACEMENT_3D('',#340901,#340902,#340903); +#340901 = CARTESIAN_POINT('',(133.5,-121.75,1.51)); +#340902 = DIRECTION('',(-1.,0.,0.)); +#340903 = DIRECTION('',(0.,1.,0.)); +#340904 = ADVANCED_FACE('',(#340905),#340915,.F.); +#340905 = FACE_BOUND('',#340906,.T.); +#340906 = EDGE_LOOP('',(#340907,#340908,#340909,#340910,#340911,#340912, + #340913,#340914)); +#340907 = ORIENTED_EDGE('',*,*,#340679,.T.); +#340908 = ORIENTED_EDGE('',*,*,#340711,.T.); +#340909 = ORIENTED_EDGE('',*,*,#340743,.T.); +#340910 = ORIENTED_EDGE('',*,*,#340775,.T.); +#340911 = ORIENTED_EDGE('',*,*,#340807,.T.); +#340912 = ORIENTED_EDGE('',*,*,#340839,.T.); +#340913 = ORIENTED_EDGE('',*,*,#340871,.T.); +#340914 = ORIENTED_EDGE('',*,*,#340894,.T.); +#340915 = PLANE('',#340916); +#340916 = AXIS2_PLACEMENT_3D('',#340917,#340918,#340919); +#340917 = CARTESIAN_POINT('',(0.,0.,1.51)); +#340918 = DIRECTION('',(0.,0.,1.)); +#340919 = DIRECTION('',(1.,0.,-0.)); +#340920 = ADVANCED_FACE('',(#340921),#340931,.T.); +#340921 = FACE_BOUND('',#340922,.F.); +#340922 = EDGE_LOOP('',(#340923,#340924,#340925,#340926,#340927,#340928, + #340929,#340930)); +#340923 = ORIENTED_EDGE('',*,*,#340662,.T.); +#340924 = ORIENTED_EDGE('',*,*,#340695,.T.); +#340925 = ORIENTED_EDGE('',*,*,#340726,.T.); +#340926 = ORIENTED_EDGE('',*,*,#340759,.T.); +#340927 = ORIENTED_EDGE('',*,*,#340790,.T.); +#340928 = ORIENTED_EDGE('',*,*,#340823,.T.); +#340929 = ORIENTED_EDGE('',*,*,#340854,.T.); +#340930 = ORIENTED_EDGE('',*,*,#340887,.T.); +#340931 = PLANE('',#340932); +#340932 = AXIS2_PLACEMENT_3D('',#340933,#340934,#340935); +#340933 = CARTESIAN_POINT('',(0.,0.,1.55)); +#340934 = DIRECTION('',(0.,0.,1.)); +#340935 = DIRECTION('',(1.,0.,-0.)); +#340936 = MANIFOLD_SOLID_BREP('',#340937); +#340937 = CLOSED_SHELL('',(#340938,#340978,#341009,#341040,#341062, + #341074)); +#340938 = ADVANCED_FACE('',(#340939),#340973,.T.); +#340939 = FACE_BOUND('',#340940,.T.); +#340940 = EDGE_LOOP('',(#340941,#340951,#340959,#340967)); +#340941 = ORIENTED_EDGE('',*,*,#340942,.T.); +#340942 = EDGE_CURVE('',#340943,#340945,#340947,.T.); +#340943 = VERTEX_POINT('',#340944); +#340944 = CARTESIAN_POINT('',(146.,-77.8,1.51)); +#340945 = VERTEX_POINT('',#340946); +#340946 = CARTESIAN_POINT('',(146.,-77.8,1.55)); +#340947 = LINE('',#340948,#340949); +#340948 = CARTESIAN_POINT('',(146.,-77.8,1.51)); +#340949 = VECTOR('',#340950,1.); +#340950 = DIRECTION('',(0.,0.,1.)); +#340951 = ORIENTED_EDGE('',*,*,#340952,.T.); +#340952 = EDGE_CURVE('',#340945,#340953,#340955,.T.); +#340953 = VERTEX_POINT('',#340954); +#340954 = CARTESIAN_POINT('',(146.,-76.9,1.55)); +#340955 = LINE('',#340956,#340957); +#340956 = CARTESIAN_POINT('',(146.,-77.8,1.55)); +#340957 = VECTOR('',#340958,1.); +#340958 = DIRECTION('',(0.,1.,0.)); +#340959 = ORIENTED_EDGE('',*,*,#340960,.F.); +#340960 = EDGE_CURVE('',#340961,#340953,#340963,.T.); +#340961 = VERTEX_POINT('',#340962); +#340962 = CARTESIAN_POINT('',(146.,-76.9,1.51)); +#340963 = LINE('',#340964,#340965); +#340964 = CARTESIAN_POINT('',(146.,-76.9,1.51)); +#340965 = VECTOR('',#340966,1.); +#340966 = DIRECTION('',(0.,0.,1.)); +#340967 = ORIENTED_EDGE('',*,*,#340968,.F.); +#340968 = EDGE_CURVE('',#340943,#340961,#340969,.T.); +#340969 = LINE('',#340970,#340971); +#340970 = CARTESIAN_POINT('',(146.,-77.8,1.51)); +#340971 = VECTOR('',#340972,1.); +#340972 = DIRECTION('',(0.,1.,0.)); +#340973 = PLANE('',#340974); +#340974 = AXIS2_PLACEMENT_3D('',#340975,#340976,#340977); +#340975 = CARTESIAN_POINT('',(146.,-77.8,1.51)); +#340976 = DIRECTION('',(-1.,0.,0.)); +#340977 = DIRECTION('',(0.,1.,0.)); +#340978 = ADVANCED_FACE('',(#340979),#341004,.T.); +#340979 = FACE_BOUND('',#340980,.T.); +#340980 = EDGE_LOOP('',(#340981,#340982,#340990,#340998)); +#340981 = ORIENTED_EDGE('',*,*,#340960,.T.); +#340982 = ORIENTED_EDGE('',*,*,#340983,.T.); +#340983 = EDGE_CURVE('',#340953,#340984,#340986,.T.); +#340984 = VERTEX_POINT('',#340985); +#340985 = CARTESIAN_POINT('',(147.5,-76.9,1.55)); +#340986 = LINE('',#340987,#340988); +#340987 = CARTESIAN_POINT('',(146.,-76.9,1.55)); +#340988 = VECTOR('',#340989,1.); +#340989 = DIRECTION('',(1.,0.,0.)); +#340990 = ORIENTED_EDGE('',*,*,#340991,.F.); +#340991 = EDGE_CURVE('',#340992,#340984,#340994,.T.); +#340992 = VERTEX_POINT('',#340993); +#340993 = CARTESIAN_POINT('',(147.5,-76.9,1.51)); +#340994 = LINE('',#340995,#340996); +#340995 = CARTESIAN_POINT('',(147.5,-76.9,1.51)); +#340996 = VECTOR('',#340997,1.); +#340997 = DIRECTION('',(0.,0.,1.)); +#340998 = ORIENTED_EDGE('',*,*,#340999,.F.); +#340999 = EDGE_CURVE('',#340961,#340992,#341000,.T.); +#341000 = LINE('',#341001,#341002); +#341001 = CARTESIAN_POINT('',(146.,-76.9,1.51)); +#341002 = VECTOR('',#341003,1.); +#341003 = DIRECTION('',(1.,0.,0.)); +#341004 = PLANE('',#341005); +#341005 = AXIS2_PLACEMENT_3D('',#341006,#341007,#341008); +#341006 = CARTESIAN_POINT('',(146.,-76.9,1.51)); +#341007 = DIRECTION('',(0.,1.,0.)); +#341008 = DIRECTION('',(1.,0.,0.)); +#341009 = ADVANCED_FACE('',(#341010),#341035,.T.); +#341010 = FACE_BOUND('',#341011,.T.); +#341011 = EDGE_LOOP('',(#341012,#341013,#341021,#341029)); +#341012 = ORIENTED_EDGE('',*,*,#340991,.T.); +#341013 = ORIENTED_EDGE('',*,*,#341014,.T.); +#341014 = EDGE_CURVE('',#340984,#341015,#341017,.T.); +#341015 = VERTEX_POINT('',#341016); +#341016 = CARTESIAN_POINT('',(147.5,-77.8,1.55)); +#341017 = LINE('',#341018,#341019); +#341018 = CARTESIAN_POINT('',(147.5,-76.9,1.55)); +#341019 = VECTOR('',#341020,1.); +#341020 = DIRECTION('',(0.,-1.,0.)); +#341021 = ORIENTED_EDGE('',*,*,#341022,.F.); +#341022 = EDGE_CURVE('',#341023,#341015,#341025,.T.); +#341023 = VERTEX_POINT('',#341024); +#341024 = CARTESIAN_POINT('',(147.5,-77.8,1.51)); +#341025 = LINE('',#341026,#341027); +#341026 = CARTESIAN_POINT('',(147.5,-77.8,1.51)); +#341027 = VECTOR('',#341028,1.); +#341028 = DIRECTION('',(0.,0.,1.)); +#341029 = ORIENTED_EDGE('',*,*,#341030,.F.); +#341030 = EDGE_CURVE('',#340992,#341023,#341031,.T.); +#341031 = LINE('',#341032,#341033); +#341032 = CARTESIAN_POINT('',(147.5,-76.9,1.51)); +#341033 = VECTOR('',#341034,1.); +#341034 = DIRECTION('',(0.,-1.,0.)); +#341035 = PLANE('',#341036); +#341036 = AXIS2_PLACEMENT_3D('',#341037,#341038,#341039); +#341037 = CARTESIAN_POINT('',(147.5,-76.9,1.51)); +#341038 = DIRECTION('',(1.,0.,-0.)); +#341039 = DIRECTION('',(0.,-1.,0.)); +#341040 = ADVANCED_FACE('',(#341041),#341057,.T.); +#341041 = FACE_BOUND('',#341042,.T.); +#341042 = EDGE_LOOP('',(#341043,#341044,#341050,#341051)); +#341043 = ORIENTED_EDGE('',*,*,#341022,.T.); +#341044 = ORIENTED_EDGE('',*,*,#341045,.T.); +#341045 = EDGE_CURVE('',#341015,#340945,#341046,.T.); +#341046 = LINE('',#341047,#341048); +#341047 = CARTESIAN_POINT('',(147.5,-77.8,1.55)); +#341048 = VECTOR('',#341049,1.); +#341049 = DIRECTION('',(-1.,0.,0.)); +#341050 = ORIENTED_EDGE('',*,*,#340942,.F.); +#341051 = ORIENTED_EDGE('',*,*,#341052,.F.); +#341052 = EDGE_CURVE('',#341023,#340943,#341053,.T.); +#341053 = LINE('',#341054,#341055); +#341054 = CARTESIAN_POINT('',(147.5,-77.8,1.51)); +#341055 = VECTOR('',#341056,1.); +#341056 = DIRECTION('',(-1.,0.,0.)); +#341057 = PLANE('',#341058); +#341058 = AXIS2_PLACEMENT_3D('',#341059,#341060,#341061); +#341059 = CARTESIAN_POINT('',(147.5,-77.8,1.51)); +#341060 = DIRECTION('',(0.,-1.,0.)); +#341061 = DIRECTION('',(-1.,0.,0.)); +#341062 = ADVANCED_FACE('',(#341063),#341069,.F.); +#341063 = FACE_BOUND('',#341064,.T.); +#341064 = EDGE_LOOP('',(#341065,#341066,#341067,#341068)); +#341065 = ORIENTED_EDGE('',*,*,#340968,.T.); +#341066 = ORIENTED_EDGE('',*,*,#340999,.T.); +#341067 = ORIENTED_EDGE('',*,*,#341030,.T.); +#341068 = ORIENTED_EDGE('',*,*,#341052,.T.); +#341069 = PLANE('',#341070); +#341070 = AXIS2_PLACEMENT_3D('',#341071,#341072,#341073); +#341071 = CARTESIAN_POINT('',(0.,0.,1.51)); +#341072 = DIRECTION('',(0.,0.,1.)); +#341073 = DIRECTION('',(1.,0.,-0.)); +#341074 = ADVANCED_FACE('',(#341075),#341081,.T.); +#341075 = FACE_BOUND('',#341076,.F.); +#341076 = EDGE_LOOP('',(#341077,#341078,#341079,#341080)); +#341077 = ORIENTED_EDGE('',*,*,#340952,.T.); +#341078 = ORIENTED_EDGE('',*,*,#340983,.T.); +#341079 = ORIENTED_EDGE('',*,*,#341014,.T.); +#341080 = ORIENTED_EDGE('',*,*,#341045,.T.); +#341081 = PLANE('',#341082); +#341082 = AXIS2_PLACEMENT_3D('',#341083,#341084,#341085); +#341083 = CARTESIAN_POINT('',(0.,0.,1.55)); +#341084 = DIRECTION('',(0.,0.,1.)); +#341085 = DIRECTION('',(1.,0.,-0.)); +#341086 = MANIFOLD_SOLID_BREP('',#341087); +#341087 = CLOSED_SHELL('',(#341088,#341130,#341161,#341194,#341225, + #341258,#341289,#341322,#341344,#341360)); +#341088 = ADVANCED_FACE('',(#341089),#341125,.T.); +#341089 = FACE_BOUND('',#341090,.T.); +#341090 = EDGE_LOOP('',(#341091,#341101,#341110,#341118)); +#341091 = ORIENTED_EDGE('',*,*,#341092,.T.); +#341092 = EDGE_CURVE('',#341093,#341095,#341097,.T.); +#341093 = VERTEX_POINT('',#341094); +#341094 = CARTESIAN_POINT('',(143.75,-120.75,1.51)); +#341095 = VERTEX_POINT('',#341096); +#341096 = CARTESIAN_POINT('',(143.75,-120.75,1.55)); +#341097 = LINE('',#341098,#341099); +#341098 = CARTESIAN_POINT('',(143.75,-120.75,1.51)); +#341099 = VECTOR('',#341100,1.); +#341100 = DIRECTION('',(0.,0.,1.)); +#341101 = ORIENTED_EDGE('',*,*,#341102,.T.); +#341102 = EDGE_CURVE('',#341095,#341103,#341105,.T.); +#341103 = VERTEX_POINT('',#341104); +#341104 = CARTESIAN_POINT('',(144.25,-120.25,1.55)); +#341105 = CIRCLE('',#341106,0.500001333575); +#341106 = AXIS2_PLACEMENT_3D('',#341107,#341108,#341109); +#341107 = CARTESIAN_POINT('',(144.25000133357,-120.7500013335,1.55)); +#341108 = DIRECTION('',(0.,0.,-1.)); +#341109 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#341110 = ORIENTED_EDGE('',*,*,#341111,.F.); +#341111 = EDGE_CURVE('',#341112,#341103,#341114,.T.); +#341112 = VERTEX_POINT('',#341113); +#341113 = CARTESIAN_POINT('',(144.25,-120.25,1.51)); +#341114 = LINE('',#341115,#341116); +#341115 = CARTESIAN_POINT('',(144.25,-120.25,1.51)); +#341116 = VECTOR('',#341117,1.); +#341117 = DIRECTION('',(0.,0.,1.)); +#341118 = ORIENTED_EDGE('',*,*,#341119,.F.); +#341119 = EDGE_CURVE('',#341093,#341112,#341120,.T.); +#341120 = CIRCLE('',#341121,0.500001333575); +#341121 = AXIS2_PLACEMENT_3D('',#341122,#341123,#341124); +#341122 = CARTESIAN_POINT('',(144.25000133357,-120.7500013335,1.51)); +#341123 = DIRECTION('',(0.,0.,-1.)); +#341124 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#341125 = CYLINDRICAL_SURFACE('',#341126,0.500001333575); +#341126 = AXIS2_PLACEMENT_3D('',#341127,#341128,#341129); +#341127 = CARTESIAN_POINT('',(144.25000133357,-120.7500013335,1.51)); +#341128 = DIRECTION('',(0.,0.,-1.)); +#341129 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#341130 = ADVANCED_FACE('',(#341131),#341156,.T.); +#341131 = FACE_BOUND('',#341132,.T.); +#341132 = EDGE_LOOP('',(#341133,#341134,#341142,#341150)); +#341133 = ORIENTED_EDGE('',*,*,#341111,.T.); +#341134 = ORIENTED_EDGE('',*,*,#341135,.T.); +#341135 = EDGE_CURVE('',#341103,#341136,#341138,.T.); +#341136 = VERTEX_POINT('',#341137); +#341137 = CARTESIAN_POINT('',(145.25,-120.25,1.55)); +#341138 = LINE('',#341139,#341140); +#341139 = CARTESIAN_POINT('',(144.25,-120.25,1.55)); +#341140 = VECTOR('',#341141,1.); +#341141 = DIRECTION('',(1.,0.,0.)); +#341142 = ORIENTED_EDGE('',*,*,#341143,.F.); +#341143 = EDGE_CURVE('',#341144,#341136,#341146,.T.); +#341144 = VERTEX_POINT('',#341145); +#341145 = CARTESIAN_POINT('',(145.25,-120.25,1.51)); +#341146 = LINE('',#341147,#341148); +#341147 = CARTESIAN_POINT('',(145.25,-120.25,1.51)); +#341148 = VECTOR('',#341149,1.); +#341149 = DIRECTION('',(0.,0.,1.)); +#341150 = ORIENTED_EDGE('',*,*,#341151,.F.); +#341151 = EDGE_CURVE('',#341112,#341144,#341152,.T.); +#341152 = LINE('',#341153,#341154); +#341153 = CARTESIAN_POINT('',(144.25,-120.25,1.51)); +#341154 = VECTOR('',#341155,1.); +#341155 = DIRECTION('',(1.,0.,0.)); +#341156 = PLANE('',#341157); +#341157 = AXIS2_PLACEMENT_3D('',#341158,#341159,#341160); +#341158 = CARTESIAN_POINT('',(144.25,-120.25,1.51)); +#341159 = DIRECTION('',(0.,1.,0.)); +#341160 = DIRECTION('',(1.,0.,0.)); +#341161 = ADVANCED_FACE('',(#341162),#341189,.T.); +#341162 = FACE_BOUND('',#341163,.T.); +#341163 = EDGE_LOOP('',(#341164,#341165,#341174,#341182)); +#341164 = ORIENTED_EDGE('',*,*,#341143,.T.); +#341165 = ORIENTED_EDGE('',*,*,#341166,.T.); +#341166 = EDGE_CURVE('',#341136,#341167,#341169,.T.); +#341167 = VERTEX_POINT('',#341168); +#341168 = CARTESIAN_POINT('',(145.75,-120.75,1.55)); +#341169 = CIRCLE('',#341170,0.500001333575); +#341170 = AXIS2_PLACEMENT_3D('',#341171,#341172,#341173); +#341171 = CARTESIAN_POINT('',(145.24999866642,-120.7500013335,1.55)); +#341172 = DIRECTION('',(0.,0.,-1.)); +#341173 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#341174 = ORIENTED_EDGE('',*,*,#341175,.F.); +#341175 = EDGE_CURVE('',#341176,#341167,#341178,.T.); +#341176 = VERTEX_POINT('',#341177); +#341177 = CARTESIAN_POINT('',(145.75,-120.75,1.51)); +#341178 = LINE('',#341179,#341180); +#341179 = CARTESIAN_POINT('',(145.75,-120.75,1.51)); +#341180 = VECTOR('',#341181,1.); +#341181 = DIRECTION('',(0.,0.,1.)); +#341182 = ORIENTED_EDGE('',*,*,#341183,.F.); +#341183 = EDGE_CURVE('',#341144,#341176,#341184,.T.); +#341184 = CIRCLE('',#341185,0.500001333575); +#341185 = AXIS2_PLACEMENT_3D('',#341186,#341187,#341188); +#341186 = CARTESIAN_POINT('',(145.24999866642,-120.7500013335,1.51)); +#341187 = DIRECTION('',(0.,0.,-1.)); +#341188 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#341189 = CYLINDRICAL_SURFACE('',#341190,0.500001333575); +#341190 = AXIS2_PLACEMENT_3D('',#341191,#341192,#341193); +#341191 = CARTESIAN_POINT('',(145.24999866642,-120.7500013335,1.51)); +#341192 = DIRECTION('',(0.,0.,-1.)); +#341193 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#341194 = ADVANCED_FACE('',(#341195),#341220,.T.); +#341195 = FACE_BOUND('',#341196,.T.); +#341196 = EDGE_LOOP('',(#341197,#341198,#341206,#341214)); +#341197 = ORIENTED_EDGE('',*,*,#341175,.T.); +#341198 = ORIENTED_EDGE('',*,*,#341199,.T.); +#341199 = EDGE_CURVE('',#341167,#341200,#341202,.T.); +#341200 = VERTEX_POINT('',#341201); +#341201 = CARTESIAN_POINT('',(145.75,-121.75,1.55)); +#341202 = LINE('',#341203,#341204); +#341203 = CARTESIAN_POINT('',(145.75,-120.75,1.55)); +#341204 = VECTOR('',#341205,1.); +#341205 = DIRECTION('',(0.,-1.,0.)); +#341206 = ORIENTED_EDGE('',*,*,#341207,.F.); +#341207 = EDGE_CURVE('',#341208,#341200,#341210,.T.); +#341208 = VERTEX_POINT('',#341209); +#341209 = CARTESIAN_POINT('',(145.75,-121.75,1.51)); +#341210 = LINE('',#341211,#341212); +#341211 = CARTESIAN_POINT('',(145.75,-121.75,1.51)); +#341212 = VECTOR('',#341213,1.); +#341213 = DIRECTION('',(0.,0.,1.)); +#341214 = ORIENTED_EDGE('',*,*,#341215,.F.); +#341215 = EDGE_CURVE('',#341176,#341208,#341216,.T.); +#341216 = LINE('',#341217,#341218); +#341217 = CARTESIAN_POINT('',(145.75,-120.75,1.51)); +#341218 = VECTOR('',#341219,1.); +#341219 = DIRECTION('',(0.,-1.,0.)); +#341220 = PLANE('',#341221); +#341221 = AXIS2_PLACEMENT_3D('',#341222,#341223,#341224); +#341222 = CARTESIAN_POINT('',(145.75,-120.75,1.51)); +#341223 = DIRECTION('',(1.,0.,-0.)); +#341224 = DIRECTION('',(0.,-1.,0.)); +#341225 = ADVANCED_FACE('',(#341226),#341253,.T.); +#341226 = FACE_BOUND('',#341227,.T.); +#341227 = EDGE_LOOP('',(#341228,#341229,#341238,#341246)); +#341228 = ORIENTED_EDGE('',*,*,#341207,.T.); +#341229 = ORIENTED_EDGE('',*,*,#341230,.T.); +#341230 = EDGE_CURVE('',#341200,#341231,#341233,.T.); +#341231 = VERTEX_POINT('',#341232); +#341232 = CARTESIAN_POINT('',(145.25,-122.25,1.55)); +#341233 = CIRCLE('',#341234,0.500001333575); +#341234 = AXIS2_PLACEMENT_3D('',#341235,#341236,#341237); +#341235 = CARTESIAN_POINT('',(145.24999866642,-121.7499986664,1.55)); +#341236 = DIRECTION('',(0.,0.,-1.)); +#341237 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#341238 = ORIENTED_EDGE('',*,*,#341239,.F.); +#341239 = EDGE_CURVE('',#341240,#341231,#341242,.T.); +#341240 = VERTEX_POINT('',#341241); +#341241 = CARTESIAN_POINT('',(145.25,-122.25,1.51)); +#341242 = LINE('',#341243,#341244); +#341243 = CARTESIAN_POINT('',(145.25,-122.25,1.51)); +#341244 = VECTOR('',#341245,1.); +#341245 = DIRECTION('',(0.,0.,1.)); +#341246 = ORIENTED_EDGE('',*,*,#341247,.F.); +#341247 = EDGE_CURVE('',#341208,#341240,#341248,.T.); +#341248 = CIRCLE('',#341249,0.500001333575); +#341249 = AXIS2_PLACEMENT_3D('',#341250,#341251,#341252); +#341250 = CARTESIAN_POINT('',(145.24999866642,-121.7499986664,1.51)); +#341251 = DIRECTION('',(0.,0.,-1.)); +#341252 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#341253 = CYLINDRICAL_SURFACE('',#341254,0.500001333575); +#341254 = AXIS2_PLACEMENT_3D('',#341255,#341256,#341257); +#341255 = CARTESIAN_POINT('',(145.24999866642,-121.7499986664,1.51)); +#341256 = DIRECTION('',(0.,0.,-1.)); +#341257 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#341258 = ADVANCED_FACE('',(#341259),#341284,.T.); +#341259 = FACE_BOUND('',#341260,.T.); +#341260 = EDGE_LOOP('',(#341261,#341262,#341270,#341278)); +#341261 = ORIENTED_EDGE('',*,*,#341239,.T.); +#341262 = ORIENTED_EDGE('',*,*,#341263,.T.); +#341263 = EDGE_CURVE('',#341231,#341264,#341266,.T.); +#341264 = VERTEX_POINT('',#341265); +#341265 = CARTESIAN_POINT('',(144.25,-122.25,1.55)); +#341266 = LINE('',#341267,#341268); +#341267 = CARTESIAN_POINT('',(145.25,-122.25,1.55)); +#341268 = VECTOR('',#341269,1.); +#341269 = DIRECTION('',(-1.,0.,0.)); +#341270 = ORIENTED_EDGE('',*,*,#341271,.F.); +#341271 = EDGE_CURVE('',#341272,#341264,#341274,.T.); +#341272 = VERTEX_POINT('',#341273); +#341273 = CARTESIAN_POINT('',(144.25,-122.25,1.51)); +#341274 = LINE('',#341275,#341276); +#341275 = CARTESIAN_POINT('',(144.25,-122.25,1.51)); +#341276 = VECTOR('',#341277,1.); +#341277 = DIRECTION('',(0.,0.,1.)); +#341278 = ORIENTED_EDGE('',*,*,#341279,.F.); +#341279 = EDGE_CURVE('',#341240,#341272,#341280,.T.); +#341280 = LINE('',#341281,#341282); +#341281 = CARTESIAN_POINT('',(145.25,-122.25,1.51)); +#341282 = VECTOR('',#341283,1.); +#341283 = DIRECTION('',(-1.,0.,0.)); +#341284 = PLANE('',#341285); +#341285 = AXIS2_PLACEMENT_3D('',#341286,#341287,#341288); +#341286 = CARTESIAN_POINT('',(145.25,-122.25,1.51)); +#341287 = DIRECTION('',(0.,-1.,0.)); +#341288 = DIRECTION('',(-1.,0.,0.)); +#341289 = ADVANCED_FACE('',(#341290),#341317,.T.); +#341290 = FACE_BOUND('',#341291,.T.); +#341291 = EDGE_LOOP('',(#341292,#341293,#341302,#341310)); +#341292 = ORIENTED_EDGE('',*,*,#341271,.T.); +#341293 = ORIENTED_EDGE('',*,*,#341294,.T.); +#341294 = EDGE_CURVE('',#341264,#341295,#341297,.T.); +#341295 = VERTEX_POINT('',#341296); +#341296 = CARTESIAN_POINT('',(143.75,-121.75,1.55)); +#341297 = CIRCLE('',#341298,0.500001333575); +#341298 = AXIS2_PLACEMENT_3D('',#341299,#341300,#341301); +#341299 = CARTESIAN_POINT('',(144.25000133357,-121.7499986664,1.55)); +#341300 = DIRECTION('',(0.,0.,-1.)); +#341301 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#341302 = ORIENTED_EDGE('',*,*,#341303,.F.); +#341303 = EDGE_CURVE('',#341304,#341295,#341306,.T.); +#341304 = VERTEX_POINT('',#341305); +#341305 = CARTESIAN_POINT('',(143.75,-121.75,1.51)); +#341306 = LINE('',#341307,#341308); +#341307 = CARTESIAN_POINT('',(143.75,-121.75,1.51)); +#341308 = VECTOR('',#341309,1.); +#341309 = DIRECTION('',(0.,0.,1.)); +#341310 = ORIENTED_EDGE('',*,*,#341311,.F.); +#341311 = EDGE_CURVE('',#341272,#341304,#341312,.T.); +#341312 = CIRCLE('',#341313,0.500001333575); +#341313 = AXIS2_PLACEMENT_3D('',#341314,#341315,#341316); +#341314 = CARTESIAN_POINT('',(144.25000133357,-121.7499986664,1.51)); +#341315 = DIRECTION('',(0.,0.,-1.)); +#341316 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#341317 = CYLINDRICAL_SURFACE('',#341318,0.500001333575); +#341318 = AXIS2_PLACEMENT_3D('',#341319,#341320,#341321); +#341319 = CARTESIAN_POINT('',(144.25000133357,-121.7499986664,1.51)); +#341320 = DIRECTION('',(0.,0.,-1.)); +#341321 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#341322 = ADVANCED_FACE('',(#341323),#341339,.T.); +#341323 = FACE_BOUND('',#341324,.T.); +#341324 = EDGE_LOOP('',(#341325,#341326,#341332,#341333)); +#341325 = ORIENTED_EDGE('',*,*,#341303,.T.); +#341326 = ORIENTED_EDGE('',*,*,#341327,.T.); +#341327 = EDGE_CURVE('',#341295,#341095,#341328,.T.); +#341328 = LINE('',#341329,#341330); +#341329 = CARTESIAN_POINT('',(143.75,-121.75,1.55)); +#341330 = VECTOR('',#341331,1.); +#341331 = DIRECTION('',(0.,1.,0.)); +#341332 = ORIENTED_EDGE('',*,*,#341092,.F.); +#341333 = ORIENTED_EDGE('',*,*,#341334,.F.); +#341334 = EDGE_CURVE('',#341304,#341093,#341335,.T.); +#341335 = LINE('',#341336,#341337); +#341336 = CARTESIAN_POINT('',(143.75,-121.75,1.51)); +#341337 = VECTOR('',#341338,1.); +#341338 = DIRECTION('',(0.,1.,0.)); +#341339 = PLANE('',#341340); +#341340 = AXIS2_PLACEMENT_3D('',#341341,#341342,#341343); +#341341 = CARTESIAN_POINT('',(143.75,-121.75,1.51)); +#341342 = DIRECTION('',(-1.,0.,0.)); +#341343 = DIRECTION('',(0.,1.,0.)); +#341344 = ADVANCED_FACE('',(#341345),#341355,.F.); +#341345 = FACE_BOUND('',#341346,.T.); +#341346 = EDGE_LOOP('',(#341347,#341348,#341349,#341350,#341351,#341352, + #341353,#341354)); +#341347 = ORIENTED_EDGE('',*,*,#341119,.T.); +#341348 = ORIENTED_EDGE('',*,*,#341151,.T.); +#341349 = ORIENTED_EDGE('',*,*,#341183,.T.); +#341350 = ORIENTED_EDGE('',*,*,#341215,.T.); +#341351 = ORIENTED_EDGE('',*,*,#341247,.T.); +#341352 = ORIENTED_EDGE('',*,*,#341279,.T.); +#341353 = ORIENTED_EDGE('',*,*,#341311,.T.); +#341354 = ORIENTED_EDGE('',*,*,#341334,.T.); +#341355 = PLANE('',#341356); +#341356 = AXIS2_PLACEMENT_3D('',#341357,#341358,#341359); +#341357 = CARTESIAN_POINT('',(0.,0.,1.51)); +#341358 = DIRECTION('',(0.,0.,1.)); +#341359 = DIRECTION('',(1.,0.,-0.)); +#341360 = ADVANCED_FACE('',(#341361),#341371,.T.); +#341361 = FACE_BOUND('',#341362,.F.); +#341362 = EDGE_LOOP('',(#341363,#341364,#341365,#341366,#341367,#341368, + #341369,#341370)); +#341363 = ORIENTED_EDGE('',*,*,#341102,.T.); +#341364 = ORIENTED_EDGE('',*,*,#341135,.T.); +#341365 = ORIENTED_EDGE('',*,*,#341166,.T.); +#341366 = ORIENTED_EDGE('',*,*,#341199,.T.); +#341367 = ORIENTED_EDGE('',*,*,#341230,.T.); +#341368 = ORIENTED_EDGE('',*,*,#341263,.T.); +#341369 = ORIENTED_EDGE('',*,*,#341294,.T.); +#341370 = ORIENTED_EDGE('',*,*,#341327,.T.); +#341371 = PLANE('',#341372); +#341372 = AXIS2_PLACEMENT_3D('',#341373,#341374,#341375); +#341373 = CARTESIAN_POINT('',(0.,0.,1.55)); +#341374 = DIRECTION('',(0.,0.,1.)); +#341375 = DIRECTION('',(1.,0.,-0.)); +#341376 = MANIFOLD_SOLID_BREP('',#341377); +#341377 = CLOSED_SHELL('',(#341378,#341418,#341449,#341480,#341502, + #341514)); +#341378 = ADVANCED_FACE('',(#341379),#341413,.T.); +#341379 = FACE_BOUND('',#341380,.T.); +#341380 = EDGE_LOOP('',(#341381,#341391,#341399,#341407)); +#341381 = ORIENTED_EDGE('',*,*,#341382,.T.); +#341382 = EDGE_CURVE('',#341383,#341385,#341387,.T.); +#341383 = VERTEX_POINT('',#341384); +#341384 = CARTESIAN_POINT('',(146.,-76.53,1.51)); +#341385 = VERTEX_POINT('',#341386); +#341386 = CARTESIAN_POINT('',(146.,-76.53,1.55)); +#341387 = LINE('',#341388,#341389); +#341388 = CARTESIAN_POINT('',(146.,-76.53,1.51)); +#341389 = VECTOR('',#341390,1.); +#341390 = DIRECTION('',(0.,0.,1.)); +#341391 = ORIENTED_EDGE('',*,*,#341392,.T.); +#341392 = EDGE_CURVE('',#341385,#341393,#341395,.T.); +#341393 = VERTEX_POINT('',#341394); +#341394 = CARTESIAN_POINT('',(146.,-75.63,1.55)); +#341395 = LINE('',#341396,#341397); +#341396 = CARTESIAN_POINT('',(146.,-76.53,1.55)); +#341397 = VECTOR('',#341398,1.); +#341398 = DIRECTION('',(0.,1.,0.)); +#341399 = ORIENTED_EDGE('',*,*,#341400,.F.); +#341400 = EDGE_CURVE('',#341401,#341393,#341403,.T.); +#341401 = VERTEX_POINT('',#341402); +#341402 = CARTESIAN_POINT('',(146.,-75.63,1.51)); +#341403 = LINE('',#341404,#341405); +#341404 = CARTESIAN_POINT('',(146.,-75.63,1.51)); +#341405 = VECTOR('',#341406,1.); +#341406 = DIRECTION('',(0.,0.,1.)); +#341407 = ORIENTED_EDGE('',*,*,#341408,.F.); +#341408 = EDGE_CURVE('',#341383,#341401,#341409,.T.); +#341409 = LINE('',#341410,#341411); +#341410 = CARTESIAN_POINT('',(146.,-76.53,1.51)); +#341411 = VECTOR('',#341412,1.); +#341412 = DIRECTION('',(0.,1.,0.)); +#341413 = PLANE('',#341414); +#341414 = AXIS2_PLACEMENT_3D('',#341415,#341416,#341417); +#341415 = CARTESIAN_POINT('',(146.,-76.53,1.51)); +#341416 = DIRECTION('',(-1.,0.,0.)); +#341417 = DIRECTION('',(0.,1.,0.)); +#341418 = ADVANCED_FACE('',(#341419),#341444,.T.); +#341419 = FACE_BOUND('',#341420,.T.); +#341420 = EDGE_LOOP('',(#341421,#341422,#341430,#341438)); +#341421 = ORIENTED_EDGE('',*,*,#341400,.T.); +#341422 = ORIENTED_EDGE('',*,*,#341423,.T.); +#341423 = EDGE_CURVE('',#341393,#341424,#341426,.T.); +#341424 = VERTEX_POINT('',#341425); +#341425 = CARTESIAN_POINT('',(147.5,-75.63,1.55)); +#341426 = LINE('',#341427,#341428); +#341427 = CARTESIAN_POINT('',(146.,-75.63,1.55)); +#341428 = VECTOR('',#341429,1.); +#341429 = DIRECTION('',(1.,0.,0.)); +#341430 = ORIENTED_EDGE('',*,*,#341431,.F.); +#341431 = EDGE_CURVE('',#341432,#341424,#341434,.T.); +#341432 = VERTEX_POINT('',#341433); +#341433 = CARTESIAN_POINT('',(147.5,-75.63,1.51)); +#341434 = LINE('',#341435,#341436); +#341435 = CARTESIAN_POINT('',(147.5,-75.63,1.51)); +#341436 = VECTOR('',#341437,1.); +#341437 = DIRECTION('',(0.,0.,1.)); +#341438 = ORIENTED_EDGE('',*,*,#341439,.F.); +#341439 = EDGE_CURVE('',#341401,#341432,#341440,.T.); +#341440 = LINE('',#341441,#341442); +#341441 = CARTESIAN_POINT('',(146.,-75.63,1.51)); +#341442 = VECTOR('',#341443,1.); +#341443 = DIRECTION('',(1.,0.,0.)); +#341444 = PLANE('',#341445); +#341445 = AXIS2_PLACEMENT_3D('',#341446,#341447,#341448); +#341446 = CARTESIAN_POINT('',(146.,-75.63,1.51)); +#341447 = DIRECTION('',(0.,1.,0.)); +#341448 = DIRECTION('',(1.,0.,0.)); +#341449 = ADVANCED_FACE('',(#341450),#341475,.T.); +#341450 = FACE_BOUND('',#341451,.T.); +#341451 = EDGE_LOOP('',(#341452,#341453,#341461,#341469)); +#341452 = ORIENTED_EDGE('',*,*,#341431,.T.); +#341453 = ORIENTED_EDGE('',*,*,#341454,.T.); +#341454 = EDGE_CURVE('',#341424,#341455,#341457,.T.); +#341455 = VERTEX_POINT('',#341456); +#341456 = CARTESIAN_POINT('',(147.5,-76.53,1.55)); +#341457 = LINE('',#341458,#341459); +#341458 = CARTESIAN_POINT('',(147.5,-75.63,1.55)); +#341459 = VECTOR('',#341460,1.); +#341460 = DIRECTION('',(0.,-1.,0.)); +#341461 = ORIENTED_EDGE('',*,*,#341462,.F.); +#341462 = EDGE_CURVE('',#341463,#341455,#341465,.T.); +#341463 = VERTEX_POINT('',#341464); +#341464 = CARTESIAN_POINT('',(147.5,-76.53,1.51)); +#341465 = LINE('',#341466,#341467); +#341466 = CARTESIAN_POINT('',(147.5,-76.53,1.51)); +#341467 = VECTOR('',#341468,1.); +#341468 = DIRECTION('',(0.,0.,1.)); +#341469 = ORIENTED_EDGE('',*,*,#341470,.F.); +#341470 = EDGE_CURVE('',#341432,#341463,#341471,.T.); +#341471 = LINE('',#341472,#341473); +#341472 = CARTESIAN_POINT('',(147.5,-75.63,1.51)); +#341473 = VECTOR('',#341474,1.); +#341474 = DIRECTION('',(0.,-1.,0.)); +#341475 = PLANE('',#341476); +#341476 = AXIS2_PLACEMENT_3D('',#341477,#341478,#341479); +#341477 = CARTESIAN_POINT('',(147.5,-75.63,1.51)); +#341478 = DIRECTION('',(1.,0.,-0.)); +#341479 = DIRECTION('',(0.,-1.,0.)); +#341480 = ADVANCED_FACE('',(#341481),#341497,.T.); +#341481 = FACE_BOUND('',#341482,.T.); +#341482 = EDGE_LOOP('',(#341483,#341484,#341490,#341491)); +#341483 = ORIENTED_EDGE('',*,*,#341462,.T.); +#341484 = ORIENTED_EDGE('',*,*,#341485,.T.); +#341485 = EDGE_CURVE('',#341455,#341385,#341486,.T.); +#341486 = LINE('',#341487,#341488); +#341487 = CARTESIAN_POINT('',(147.5,-76.53,1.55)); +#341488 = VECTOR('',#341489,1.); +#341489 = DIRECTION('',(-1.,0.,0.)); +#341490 = ORIENTED_EDGE('',*,*,#341382,.F.); +#341491 = ORIENTED_EDGE('',*,*,#341492,.F.); +#341492 = EDGE_CURVE('',#341463,#341383,#341493,.T.); +#341493 = LINE('',#341494,#341495); +#341494 = CARTESIAN_POINT('',(147.5,-76.53,1.51)); +#341495 = VECTOR('',#341496,1.); +#341496 = DIRECTION('',(-1.,0.,0.)); +#341497 = PLANE('',#341498); +#341498 = AXIS2_PLACEMENT_3D('',#341499,#341500,#341501); +#341499 = CARTESIAN_POINT('',(147.5,-76.53,1.51)); +#341500 = DIRECTION('',(0.,-1.,0.)); +#341501 = DIRECTION('',(-1.,0.,0.)); +#341502 = ADVANCED_FACE('',(#341503),#341509,.F.); +#341503 = FACE_BOUND('',#341504,.T.); +#341504 = EDGE_LOOP('',(#341505,#341506,#341507,#341508)); +#341505 = ORIENTED_EDGE('',*,*,#341408,.T.); +#341506 = ORIENTED_EDGE('',*,*,#341439,.T.); +#341507 = ORIENTED_EDGE('',*,*,#341470,.T.); +#341508 = ORIENTED_EDGE('',*,*,#341492,.T.); +#341509 = PLANE('',#341510); +#341510 = AXIS2_PLACEMENT_3D('',#341511,#341512,#341513); +#341511 = CARTESIAN_POINT('',(0.,0.,1.51)); +#341512 = DIRECTION('',(0.,0.,1.)); +#341513 = DIRECTION('',(1.,0.,-0.)); +#341514 = ADVANCED_FACE('',(#341515),#341521,.T.); +#341515 = FACE_BOUND('',#341516,.F.); +#341516 = EDGE_LOOP('',(#341517,#341518,#341519,#341520)); +#341517 = ORIENTED_EDGE('',*,*,#341392,.T.); +#341518 = ORIENTED_EDGE('',*,*,#341423,.T.); +#341519 = ORIENTED_EDGE('',*,*,#341454,.T.); +#341520 = ORIENTED_EDGE('',*,*,#341485,.T.); +#341521 = PLANE('',#341522); +#341522 = AXIS2_PLACEMENT_3D('',#341523,#341524,#341525); +#341523 = CARTESIAN_POINT('',(0.,0.,1.55)); +#341524 = DIRECTION('',(0.,0.,1.)); +#341525 = DIRECTION('',(1.,0.,-0.)); +#341526 = MANIFOLD_SOLID_BREP('',#341527); +#341527 = CLOSED_SHELL('',(#341528,#341568,#341599,#341630,#341652, + #341664)); +#341528 = ADVANCED_FACE('',(#341529),#341563,.T.); +#341529 = FACE_BOUND('',#341530,.T.); +#341530 = EDGE_LOOP('',(#341531,#341541,#341549,#341557)); +#341531 = ORIENTED_EDGE('',*,*,#341532,.T.); +#341532 = EDGE_CURVE('',#341533,#341535,#341537,.T.); +#341533 = VERTEX_POINT('',#341534); +#341534 = CARTESIAN_POINT('',(128.5,-76.53,1.51)); +#341535 = VERTEX_POINT('',#341536); +#341536 = CARTESIAN_POINT('',(128.5,-76.53,1.55)); +#341537 = LINE('',#341538,#341539); +#341538 = CARTESIAN_POINT('',(128.5,-76.53,1.51)); +#341539 = VECTOR('',#341540,1.); +#341540 = DIRECTION('',(0.,0.,1.)); +#341541 = ORIENTED_EDGE('',*,*,#341542,.T.); +#341542 = EDGE_CURVE('',#341535,#341543,#341545,.T.); +#341543 = VERTEX_POINT('',#341544); +#341544 = CARTESIAN_POINT('',(128.5,-75.63,1.55)); +#341545 = LINE('',#341546,#341547); +#341546 = CARTESIAN_POINT('',(128.5,-76.53,1.55)); +#341547 = VECTOR('',#341548,1.); +#341548 = DIRECTION('',(0.,1.,0.)); +#341549 = ORIENTED_EDGE('',*,*,#341550,.F.); +#341550 = EDGE_CURVE('',#341551,#341543,#341553,.T.); +#341551 = VERTEX_POINT('',#341552); +#341552 = CARTESIAN_POINT('',(128.5,-75.63,1.51)); +#341553 = LINE('',#341554,#341555); +#341554 = CARTESIAN_POINT('',(128.5,-75.63,1.51)); +#341555 = VECTOR('',#341556,1.); +#341556 = DIRECTION('',(0.,0.,1.)); +#341557 = ORIENTED_EDGE('',*,*,#341558,.F.); +#341558 = EDGE_CURVE('',#341533,#341551,#341559,.T.); +#341559 = LINE('',#341560,#341561); +#341560 = CARTESIAN_POINT('',(128.5,-76.53,1.51)); +#341561 = VECTOR('',#341562,1.); +#341562 = DIRECTION('',(0.,1.,0.)); +#341563 = PLANE('',#341564); +#341564 = AXIS2_PLACEMENT_3D('',#341565,#341566,#341567); +#341565 = CARTESIAN_POINT('',(128.5,-76.53,1.51)); +#341566 = DIRECTION('',(-1.,0.,0.)); +#341567 = DIRECTION('',(0.,1.,0.)); +#341568 = ADVANCED_FACE('',(#341569),#341594,.T.); +#341569 = FACE_BOUND('',#341570,.T.); +#341570 = EDGE_LOOP('',(#341571,#341572,#341580,#341588)); +#341571 = ORIENTED_EDGE('',*,*,#341550,.T.); +#341572 = ORIENTED_EDGE('',*,*,#341573,.T.); +#341573 = EDGE_CURVE('',#341543,#341574,#341576,.T.); +#341574 = VERTEX_POINT('',#341575); +#341575 = CARTESIAN_POINT('',(130.,-75.63,1.55)); +#341576 = LINE('',#341577,#341578); +#341577 = CARTESIAN_POINT('',(128.5,-75.63,1.55)); +#341578 = VECTOR('',#341579,1.); +#341579 = DIRECTION('',(1.,0.,0.)); +#341580 = ORIENTED_EDGE('',*,*,#341581,.F.); +#341581 = EDGE_CURVE('',#341582,#341574,#341584,.T.); +#341582 = VERTEX_POINT('',#341583); +#341583 = CARTESIAN_POINT('',(130.,-75.63,1.51)); +#341584 = LINE('',#341585,#341586); +#341585 = CARTESIAN_POINT('',(130.,-75.63,1.51)); +#341586 = VECTOR('',#341587,1.); +#341587 = DIRECTION('',(0.,0.,1.)); +#341588 = ORIENTED_EDGE('',*,*,#341589,.F.); +#341589 = EDGE_CURVE('',#341551,#341582,#341590,.T.); +#341590 = LINE('',#341591,#341592); +#341591 = CARTESIAN_POINT('',(128.5,-75.63,1.51)); +#341592 = VECTOR('',#341593,1.); +#341593 = DIRECTION('',(1.,0.,0.)); +#341594 = PLANE('',#341595); +#341595 = AXIS2_PLACEMENT_3D('',#341596,#341597,#341598); +#341596 = CARTESIAN_POINT('',(128.5,-75.63,1.51)); +#341597 = DIRECTION('',(0.,1.,0.)); +#341598 = DIRECTION('',(1.,0.,0.)); +#341599 = ADVANCED_FACE('',(#341600),#341625,.T.); +#341600 = FACE_BOUND('',#341601,.T.); +#341601 = EDGE_LOOP('',(#341602,#341603,#341611,#341619)); +#341602 = ORIENTED_EDGE('',*,*,#341581,.T.); +#341603 = ORIENTED_EDGE('',*,*,#341604,.T.); +#341604 = EDGE_CURVE('',#341574,#341605,#341607,.T.); +#341605 = VERTEX_POINT('',#341606); +#341606 = CARTESIAN_POINT('',(130.,-76.53,1.55)); +#341607 = LINE('',#341608,#341609); +#341608 = CARTESIAN_POINT('',(130.,-75.63,1.55)); +#341609 = VECTOR('',#341610,1.); +#341610 = DIRECTION('',(0.,-1.,0.)); +#341611 = ORIENTED_EDGE('',*,*,#341612,.F.); +#341612 = EDGE_CURVE('',#341613,#341605,#341615,.T.); +#341613 = VERTEX_POINT('',#341614); +#341614 = CARTESIAN_POINT('',(130.,-76.53,1.51)); +#341615 = LINE('',#341616,#341617); +#341616 = CARTESIAN_POINT('',(130.,-76.53,1.51)); +#341617 = VECTOR('',#341618,1.); +#341618 = DIRECTION('',(0.,0.,1.)); +#341619 = ORIENTED_EDGE('',*,*,#341620,.F.); +#341620 = EDGE_CURVE('',#341582,#341613,#341621,.T.); +#341621 = LINE('',#341622,#341623); +#341622 = CARTESIAN_POINT('',(130.,-75.63,1.51)); +#341623 = VECTOR('',#341624,1.); +#341624 = DIRECTION('',(0.,-1.,0.)); +#341625 = PLANE('',#341626); +#341626 = AXIS2_PLACEMENT_3D('',#341627,#341628,#341629); +#341627 = CARTESIAN_POINT('',(130.,-75.63,1.51)); +#341628 = DIRECTION('',(1.,0.,-0.)); +#341629 = DIRECTION('',(0.,-1.,0.)); +#341630 = ADVANCED_FACE('',(#341631),#341647,.T.); +#341631 = FACE_BOUND('',#341632,.T.); +#341632 = EDGE_LOOP('',(#341633,#341634,#341640,#341641)); +#341633 = ORIENTED_EDGE('',*,*,#341612,.T.); +#341634 = ORIENTED_EDGE('',*,*,#341635,.T.); +#341635 = EDGE_CURVE('',#341605,#341535,#341636,.T.); +#341636 = LINE('',#341637,#341638); +#341637 = CARTESIAN_POINT('',(130.,-76.53,1.55)); +#341638 = VECTOR('',#341639,1.); +#341639 = DIRECTION('',(-1.,0.,0.)); +#341640 = ORIENTED_EDGE('',*,*,#341532,.F.); +#341641 = ORIENTED_EDGE('',*,*,#341642,.F.); +#341642 = EDGE_CURVE('',#341613,#341533,#341643,.T.); +#341643 = LINE('',#341644,#341645); +#341644 = CARTESIAN_POINT('',(130.,-76.53,1.51)); +#341645 = VECTOR('',#341646,1.); +#341646 = DIRECTION('',(-1.,0.,0.)); +#341647 = PLANE('',#341648); +#341648 = AXIS2_PLACEMENT_3D('',#341649,#341650,#341651); +#341649 = CARTESIAN_POINT('',(130.,-76.53,1.51)); +#341650 = DIRECTION('',(0.,-1.,0.)); +#341651 = DIRECTION('',(-1.,0.,0.)); +#341652 = ADVANCED_FACE('',(#341653),#341659,.F.); +#341653 = FACE_BOUND('',#341654,.T.); +#341654 = EDGE_LOOP('',(#341655,#341656,#341657,#341658)); +#341655 = ORIENTED_EDGE('',*,*,#341558,.T.); +#341656 = ORIENTED_EDGE('',*,*,#341589,.T.); +#341657 = ORIENTED_EDGE('',*,*,#341620,.T.); +#341658 = ORIENTED_EDGE('',*,*,#341642,.T.); +#341659 = PLANE('',#341660); +#341660 = AXIS2_PLACEMENT_3D('',#341661,#341662,#341663); +#341661 = CARTESIAN_POINT('',(0.,0.,1.51)); +#341662 = DIRECTION('',(0.,0.,1.)); +#341663 = DIRECTION('',(1.,0.,-0.)); +#341664 = ADVANCED_FACE('',(#341665),#341671,.T.); +#341665 = FACE_BOUND('',#341666,.F.); +#341666 = EDGE_LOOP('',(#341667,#341668,#341669,#341670)); +#341667 = ORIENTED_EDGE('',*,*,#341542,.T.); +#341668 = ORIENTED_EDGE('',*,*,#341573,.T.); +#341669 = ORIENTED_EDGE('',*,*,#341604,.T.); +#341670 = ORIENTED_EDGE('',*,*,#341635,.T.); +#341671 = PLANE('',#341672); +#341672 = AXIS2_PLACEMENT_3D('',#341673,#341674,#341675); +#341673 = CARTESIAN_POINT('',(0.,0.,1.55)); +#341674 = DIRECTION('',(0.,0.,1.)); +#341675 = DIRECTION('',(1.,0.,-0.)); +#341676 = MANIFOLD_SOLID_BREP('',#341677); +#341677 = CLOSED_SHELL('',(#341678,#341720,#341751,#341784,#341815, + #341848,#341879,#341912,#341934,#341950)); +#341678 = ADVANCED_FACE('',(#341679),#341715,.T.); +#341679 = FACE_BOUND('',#341680,.T.); +#341680 = EDGE_LOOP('',(#341681,#341691,#341700,#341708)); +#341681 = ORIENTED_EDGE('',*,*,#341682,.T.); +#341682 = EDGE_CURVE('',#341683,#341685,#341687,.T.); +#341683 = VERTEX_POINT('',#341684); +#341684 = CARTESIAN_POINT('',(121.75,-99.1125,1.51)); +#341685 = VERTEX_POINT('',#341686); +#341686 = CARTESIAN_POINT('',(121.75,-99.1125,1.55)); +#341687 = LINE('',#341688,#341689); +#341688 = CARTESIAN_POINT('',(121.75,-99.1125,1.51)); +#341689 = VECTOR('',#341690,1.); +#341690 = DIRECTION('',(0.,0.,1.)); +#341691 = ORIENTED_EDGE('',*,*,#341692,.T.); +#341692 = EDGE_CURVE('',#341685,#341693,#341695,.T.); +#341693 = VERTEX_POINT('',#341694); +#341694 = CARTESIAN_POINT('',(121.9375,-98.925,1.55)); +#341695 = CIRCLE('',#341696,0.187498366229); +#341696 = AXIS2_PLACEMENT_3D('',#341697,#341698,#341699); +#341697 = CARTESIAN_POINT('',(121.93749836622,-99.11249836622,1.55)); +#341698 = DIRECTION('',(0.,0.,-1.)); +#341699 = DIRECTION('',(-0.999999999962,-8.713558354919E-06,-0.)); +#341700 = ORIENTED_EDGE('',*,*,#341701,.F.); +#341701 = EDGE_CURVE('',#341702,#341693,#341704,.T.); +#341702 = VERTEX_POINT('',#341703); +#341703 = CARTESIAN_POINT('',(121.9375,-98.925,1.51)); +#341704 = LINE('',#341705,#341706); +#341705 = CARTESIAN_POINT('',(121.9375,-98.925,1.51)); +#341706 = VECTOR('',#341707,1.); +#341707 = DIRECTION('',(0.,0.,1.)); +#341708 = ORIENTED_EDGE('',*,*,#341709,.F.); +#341709 = EDGE_CURVE('',#341683,#341702,#341710,.T.); +#341710 = CIRCLE('',#341711,0.187498366229); +#341711 = AXIS2_PLACEMENT_3D('',#341712,#341713,#341714); +#341712 = CARTESIAN_POINT('',(121.93749836622,-99.11249836622,1.51)); +#341713 = DIRECTION('',(0.,0.,-1.)); +#341714 = DIRECTION('',(-0.999999999962,-8.713558354919E-06,-0.)); +#341715 = CYLINDRICAL_SURFACE('',#341716,0.187498366229); +#341716 = AXIS2_PLACEMENT_3D('',#341717,#341718,#341719); +#341717 = CARTESIAN_POINT('',(121.93749836622,-99.11249836622,1.51)); +#341718 = DIRECTION('',(0.,0.,-1.)); +#341719 = DIRECTION('',(-0.999999999962,-8.713558354919E-06,-0.)); +#341720 = ADVANCED_FACE('',(#341721),#341746,.T.); +#341721 = FACE_BOUND('',#341722,.T.); +#341722 = EDGE_LOOP('',(#341723,#341724,#341732,#341740)); +#341723 = ORIENTED_EDGE('',*,*,#341701,.T.); +#341724 = ORIENTED_EDGE('',*,*,#341725,.T.); +#341725 = EDGE_CURVE('',#341693,#341726,#341728,.T.); +#341726 = VERTEX_POINT('',#341727); +#341727 = CARTESIAN_POINT('',(123.3625,-98.925,1.55)); +#341728 = LINE('',#341729,#341730); +#341729 = CARTESIAN_POINT('',(121.9375,-98.925,1.55)); +#341730 = VECTOR('',#341731,1.); +#341731 = DIRECTION('',(1.,0.,0.)); +#341732 = ORIENTED_EDGE('',*,*,#341733,.F.); +#341733 = EDGE_CURVE('',#341734,#341726,#341736,.T.); +#341734 = VERTEX_POINT('',#341735); +#341735 = CARTESIAN_POINT('',(123.3625,-98.925,1.51)); +#341736 = LINE('',#341737,#341738); +#341737 = CARTESIAN_POINT('',(123.3625,-98.925,1.51)); +#341738 = VECTOR('',#341739,1.); +#341739 = DIRECTION('',(0.,0.,1.)); +#341740 = ORIENTED_EDGE('',*,*,#341741,.F.); +#341741 = EDGE_CURVE('',#341702,#341734,#341742,.T.); +#341742 = LINE('',#341743,#341744); +#341743 = CARTESIAN_POINT('',(121.9375,-98.925,1.51)); +#341744 = VECTOR('',#341745,1.); +#341745 = DIRECTION('',(1.,0.,0.)); +#341746 = PLANE('',#341747); +#341747 = AXIS2_PLACEMENT_3D('',#341748,#341749,#341750); +#341748 = CARTESIAN_POINT('',(121.9375,-98.925,1.51)); +#341749 = DIRECTION('',(0.,1.,0.)); +#341750 = DIRECTION('',(1.,0.,0.)); +#341751 = ADVANCED_FACE('',(#341752),#341779,.T.); +#341752 = FACE_BOUND('',#341753,.T.); +#341753 = EDGE_LOOP('',(#341754,#341755,#341764,#341772)); +#341754 = ORIENTED_EDGE('',*,*,#341733,.T.); +#341755 = ORIENTED_EDGE('',*,*,#341756,.T.); +#341756 = EDGE_CURVE('',#341726,#341757,#341759,.T.); +#341757 = VERTEX_POINT('',#341758); +#341758 = CARTESIAN_POINT('',(123.55,-99.1125,1.55)); +#341759 = CIRCLE('',#341760,0.187498366229); +#341760 = AXIS2_PLACEMENT_3D('',#341761,#341762,#341763); +#341761 = CARTESIAN_POINT('',(123.36250163377,-99.11249836622,1.55)); +#341762 = DIRECTION('',(0.,0.,-1.)); +#341763 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#341764 = ORIENTED_EDGE('',*,*,#341765,.F.); +#341765 = EDGE_CURVE('',#341766,#341757,#341768,.T.); +#341766 = VERTEX_POINT('',#341767); +#341767 = CARTESIAN_POINT('',(123.55,-99.1125,1.51)); +#341768 = LINE('',#341769,#341770); +#341769 = CARTESIAN_POINT('',(123.55,-99.1125,1.51)); +#341770 = VECTOR('',#341771,1.); +#341771 = DIRECTION('',(0.,0.,1.)); +#341772 = ORIENTED_EDGE('',*,*,#341773,.F.); +#341773 = EDGE_CURVE('',#341734,#341766,#341774,.T.); +#341774 = CIRCLE('',#341775,0.187498366229); +#341775 = AXIS2_PLACEMENT_3D('',#341776,#341777,#341778); +#341776 = CARTESIAN_POINT('',(123.36250163377,-99.11249836622,1.51)); +#341777 = DIRECTION('',(0.,0.,-1.)); +#341778 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#341779 = CYLINDRICAL_SURFACE('',#341780,0.187498366229); +#341780 = AXIS2_PLACEMENT_3D('',#341781,#341782,#341783); +#341781 = CARTESIAN_POINT('',(123.36250163377,-99.11249836622,1.51)); +#341782 = DIRECTION('',(0.,0.,-1.)); +#341783 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#341784 = ADVANCED_FACE('',(#341785),#341810,.T.); +#341785 = FACE_BOUND('',#341786,.T.); +#341786 = EDGE_LOOP('',(#341787,#341788,#341796,#341804)); +#341787 = ORIENTED_EDGE('',*,*,#341765,.T.); +#341788 = ORIENTED_EDGE('',*,*,#341789,.T.); +#341789 = EDGE_CURVE('',#341757,#341790,#341792,.T.); +#341790 = VERTEX_POINT('',#341791); +#341791 = CARTESIAN_POINT('',(123.55,-99.4875,1.55)); +#341792 = LINE('',#341793,#341794); +#341793 = CARTESIAN_POINT('',(123.55,-99.1125,1.55)); +#341794 = VECTOR('',#341795,1.); +#341795 = DIRECTION('',(0.,-1.,0.)); +#341796 = ORIENTED_EDGE('',*,*,#341797,.F.); +#341797 = EDGE_CURVE('',#341798,#341790,#341800,.T.); +#341798 = VERTEX_POINT('',#341799); +#341799 = CARTESIAN_POINT('',(123.55,-99.4875,1.51)); +#341800 = LINE('',#341801,#341802); +#341801 = CARTESIAN_POINT('',(123.55,-99.4875,1.51)); +#341802 = VECTOR('',#341803,1.); +#341803 = DIRECTION('',(0.,0.,1.)); +#341804 = ORIENTED_EDGE('',*,*,#341805,.F.); +#341805 = EDGE_CURVE('',#341766,#341798,#341806,.T.); +#341806 = LINE('',#341807,#341808); +#341807 = CARTESIAN_POINT('',(123.55,-99.1125,1.51)); +#341808 = VECTOR('',#341809,1.); +#341809 = DIRECTION('',(0.,-1.,0.)); +#341810 = PLANE('',#341811); +#341811 = AXIS2_PLACEMENT_3D('',#341812,#341813,#341814); +#341812 = CARTESIAN_POINT('',(123.55,-99.1125,1.51)); +#341813 = DIRECTION('',(1.,0.,-0.)); +#341814 = DIRECTION('',(0.,-1.,0.)); +#341815 = ADVANCED_FACE('',(#341816),#341843,.T.); +#341816 = FACE_BOUND('',#341817,.T.); +#341817 = EDGE_LOOP('',(#341818,#341819,#341828,#341836)); +#341818 = ORIENTED_EDGE('',*,*,#341797,.T.); +#341819 = ORIENTED_EDGE('',*,*,#341820,.T.); +#341820 = EDGE_CURVE('',#341790,#341821,#341823,.T.); +#341821 = VERTEX_POINT('',#341822); +#341822 = CARTESIAN_POINT('',(123.3625,-99.675,1.55)); +#341823 = CIRCLE('',#341824,0.187498366229); +#341824 = AXIS2_PLACEMENT_3D('',#341825,#341826,#341827); +#341825 = CARTESIAN_POINT('',(123.36250163377,-99.48750163377,1.55)); +#341826 = DIRECTION('',(0.,0.,-1.)); +#341827 = DIRECTION('',(0.999999999962,8.713558354919E-06,0.)); +#341828 = ORIENTED_EDGE('',*,*,#341829,.F.); +#341829 = EDGE_CURVE('',#341830,#341821,#341832,.T.); +#341830 = VERTEX_POINT('',#341831); +#341831 = CARTESIAN_POINT('',(123.3625,-99.675,1.51)); +#341832 = LINE('',#341833,#341834); +#341833 = CARTESIAN_POINT('',(123.3625,-99.675,1.51)); +#341834 = VECTOR('',#341835,1.); +#341835 = DIRECTION('',(0.,0.,1.)); +#341836 = ORIENTED_EDGE('',*,*,#341837,.F.); +#341837 = EDGE_CURVE('',#341798,#341830,#341838,.T.); +#341838 = CIRCLE('',#341839,0.187498366229); +#341839 = AXIS2_PLACEMENT_3D('',#341840,#341841,#341842); +#341840 = CARTESIAN_POINT('',(123.36250163377,-99.48750163377,1.51)); +#341841 = DIRECTION('',(0.,0.,-1.)); +#341842 = DIRECTION('',(0.999999999962,8.713558354919E-06,0.)); +#341843 = CYLINDRICAL_SURFACE('',#341844,0.187498366229); +#341844 = AXIS2_PLACEMENT_3D('',#341845,#341846,#341847); +#341845 = CARTESIAN_POINT('',(123.36250163377,-99.48750163377,1.51)); +#341846 = DIRECTION('',(0.,0.,-1.)); +#341847 = DIRECTION('',(0.999999999962,8.713558354919E-06,0.)); +#341848 = ADVANCED_FACE('',(#341849),#341874,.T.); +#341849 = FACE_BOUND('',#341850,.T.); +#341850 = EDGE_LOOP('',(#341851,#341852,#341860,#341868)); +#341851 = ORIENTED_EDGE('',*,*,#341829,.T.); +#341852 = ORIENTED_EDGE('',*,*,#341853,.T.); +#341853 = EDGE_CURVE('',#341821,#341854,#341856,.T.); +#341854 = VERTEX_POINT('',#341855); +#341855 = CARTESIAN_POINT('',(121.9375,-99.675,1.55)); +#341856 = LINE('',#341857,#341858); +#341857 = CARTESIAN_POINT('',(123.3625,-99.675,1.55)); +#341858 = VECTOR('',#341859,1.); +#341859 = DIRECTION('',(-1.,0.,0.)); +#341860 = ORIENTED_EDGE('',*,*,#341861,.F.); +#341861 = EDGE_CURVE('',#341862,#341854,#341864,.T.); +#341862 = VERTEX_POINT('',#341863); +#341863 = CARTESIAN_POINT('',(121.9375,-99.675,1.51)); +#341864 = LINE('',#341865,#341866); +#341865 = CARTESIAN_POINT('',(121.9375,-99.675,1.51)); +#341866 = VECTOR('',#341867,1.); +#341867 = DIRECTION('',(0.,0.,1.)); +#341868 = ORIENTED_EDGE('',*,*,#341869,.F.); +#341869 = EDGE_CURVE('',#341830,#341862,#341870,.T.); +#341870 = LINE('',#341871,#341872); +#341871 = CARTESIAN_POINT('',(123.3625,-99.675,1.51)); +#341872 = VECTOR('',#341873,1.); +#341873 = DIRECTION('',(-1.,0.,0.)); +#341874 = PLANE('',#341875); +#341875 = AXIS2_PLACEMENT_3D('',#341876,#341877,#341878); +#341876 = CARTESIAN_POINT('',(123.3625,-99.675,1.51)); +#341877 = DIRECTION('',(0.,-1.,0.)); +#341878 = DIRECTION('',(-1.,0.,0.)); +#341879 = ADVANCED_FACE('',(#341880),#341907,.T.); +#341880 = FACE_BOUND('',#341881,.T.); +#341881 = EDGE_LOOP('',(#341882,#341883,#341892,#341900)); +#341882 = ORIENTED_EDGE('',*,*,#341861,.T.); +#341883 = ORIENTED_EDGE('',*,*,#341884,.T.); +#341884 = EDGE_CURVE('',#341854,#341885,#341887,.T.); +#341885 = VERTEX_POINT('',#341886); +#341886 = CARTESIAN_POINT('',(121.75,-99.4875,1.55)); +#341887 = CIRCLE('',#341888,0.187498366229); +#341888 = AXIS2_PLACEMENT_3D('',#341889,#341890,#341891); +#341889 = CARTESIAN_POINT('',(121.93749836622,-99.48750163377,1.55)); +#341890 = DIRECTION('',(0.,0.,-1.)); +#341891 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#341892 = ORIENTED_EDGE('',*,*,#341893,.F.); +#341893 = EDGE_CURVE('',#341894,#341885,#341896,.T.); +#341894 = VERTEX_POINT('',#341895); +#341895 = CARTESIAN_POINT('',(121.75,-99.4875,1.51)); +#341896 = LINE('',#341897,#341898); +#341897 = CARTESIAN_POINT('',(121.75,-99.4875,1.51)); +#341898 = VECTOR('',#341899,1.); +#341899 = DIRECTION('',(0.,0.,1.)); +#341900 = ORIENTED_EDGE('',*,*,#341901,.F.); +#341901 = EDGE_CURVE('',#341862,#341894,#341902,.T.); +#341902 = CIRCLE('',#341903,0.187498366229); +#341903 = AXIS2_PLACEMENT_3D('',#341904,#341905,#341906); +#341904 = CARTESIAN_POINT('',(121.93749836622,-99.48750163377,1.51)); +#341905 = DIRECTION('',(0.,0.,-1.)); +#341906 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#341907 = CYLINDRICAL_SURFACE('',#341908,0.187498366229); +#341908 = AXIS2_PLACEMENT_3D('',#341909,#341910,#341911); +#341909 = CARTESIAN_POINT('',(121.93749836622,-99.48750163377,1.51)); +#341910 = DIRECTION('',(0.,0.,-1.)); +#341911 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#341912 = ADVANCED_FACE('',(#341913),#341929,.T.); +#341913 = FACE_BOUND('',#341914,.T.); +#341914 = EDGE_LOOP('',(#341915,#341916,#341922,#341923)); +#341915 = ORIENTED_EDGE('',*,*,#341893,.T.); +#341916 = ORIENTED_EDGE('',*,*,#341917,.T.); +#341917 = EDGE_CURVE('',#341885,#341685,#341918,.T.); +#341918 = LINE('',#341919,#341920); +#341919 = CARTESIAN_POINT('',(121.75,-99.4875,1.55)); +#341920 = VECTOR('',#341921,1.); +#341921 = DIRECTION('',(0.,1.,0.)); +#341922 = ORIENTED_EDGE('',*,*,#341682,.F.); +#341923 = ORIENTED_EDGE('',*,*,#341924,.F.); +#341924 = EDGE_CURVE('',#341894,#341683,#341925,.T.); +#341925 = LINE('',#341926,#341927); +#341926 = CARTESIAN_POINT('',(121.75,-99.4875,1.51)); +#341927 = VECTOR('',#341928,1.); +#341928 = DIRECTION('',(0.,1.,0.)); +#341929 = PLANE('',#341930); +#341930 = AXIS2_PLACEMENT_3D('',#341931,#341932,#341933); +#341931 = CARTESIAN_POINT('',(121.75,-99.4875,1.51)); +#341932 = DIRECTION('',(-1.,0.,0.)); +#341933 = DIRECTION('',(0.,1.,0.)); +#341934 = ADVANCED_FACE('',(#341935),#341945,.F.); +#341935 = FACE_BOUND('',#341936,.T.); +#341936 = EDGE_LOOP('',(#341937,#341938,#341939,#341940,#341941,#341942, + #341943,#341944)); +#341937 = ORIENTED_EDGE('',*,*,#341709,.T.); +#341938 = ORIENTED_EDGE('',*,*,#341741,.T.); +#341939 = ORIENTED_EDGE('',*,*,#341773,.T.); +#341940 = ORIENTED_EDGE('',*,*,#341805,.T.); +#341941 = ORIENTED_EDGE('',*,*,#341837,.T.); +#341942 = ORIENTED_EDGE('',*,*,#341869,.T.); +#341943 = ORIENTED_EDGE('',*,*,#341901,.T.); +#341944 = ORIENTED_EDGE('',*,*,#341924,.T.); +#341945 = PLANE('',#341946); +#341946 = AXIS2_PLACEMENT_3D('',#341947,#341948,#341949); +#341947 = CARTESIAN_POINT('',(0.,0.,1.51)); +#341948 = DIRECTION('',(0.,0.,1.)); +#341949 = DIRECTION('',(1.,0.,-0.)); +#341950 = ADVANCED_FACE('',(#341951),#341961,.T.); +#341951 = FACE_BOUND('',#341952,.F.); +#341952 = EDGE_LOOP('',(#341953,#341954,#341955,#341956,#341957,#341958, + #341959,#341960)); +#341953 = ORIENTED_EDGE('',*,*,#341692,.T.); +#341954 = ORIENTED_EDGE('',*,*,#341725,.T.); +#341955 = ORIENTED_EDGE('',*,*,#341756,.T.); +#341956 = ORIENTED_EDGE('',*,*,#341789,.T.); +#341957 = ORIENTED_EDGE('',*,*,#341820,.T.); +#341958 = ORIENTED_EDGE('',*,*,#341853,.T.); +#341959 = ORIENTED_EDGE('',*,*,#341884,.T.); +#341960 = ORIENTED_EDGE('',*,*,#341917,.T.); +#341961 = PLANE('',#341962); +#341962 = AXIS2_PLACEMENT_3D('',#341963,#341964,#341965); +#341963 = CARTESIAN_POINT('',(0.,0.,1.55)); +#341964 = DIRECTION('',(0.,0.,1.)); +#341965 = DIRECTION('',(1.,0.,-0.)); +#341966 = MANIFOLD_SOLID_BREP('',#341967); +#341967 = CLOSED_SHELL('',(#341968,#342010,#342041,#342074,#342105, + #342138,#342169,#342202,#342224,#342240)); +#341968 = ADVANCED_FACE('',(#341969),#342005,.T.); +#341969 = FACE_BOUND('',#341970,.T.); +#341970 = EDGE_LOOP('',(#341971,#341981,#341990,#341998)); +#341971 = ORIENTED_EDGE('',*,*,#341972,.T.); +#341972 = EDGE_CURVE('',#341973,#341975,#341977,.T.); +#341973 = VERTEX_POINT('',#341974); +#341974 = CARTESIAN_POINT('',(121.75,-101.5625,1.51)); +#341975 = VERTEX_POINT('',#341976); +#341976 = CARTESIAN_POINT('',(121.75,-101.5625,1.55)); +#341977 = LINE('',#341978,#341979); +#341978 = CARTESIAN_POINT('',(121.75,-101.5625,1.51)); +#341979 = VECTOR('',#341980,1.); +#341980 = DIRECTION('',(0.,0.,1.)); +#341981 = ORIENTED_EDGE('',*,*,#341982,.T.); +#341982 = EDGE_CURVE('',#341975,#341983,#341985,.T.); +#341983 = VERTEX_POINT('',#341984); +#341984 = CARTESIAN_POINT('',(121.9375,-101.375,1.55)); +#341985 = CIRCLE('',#341986,0.187498366229); +#341986 = AXIS2_PLACEMENT_3D('',#341987,#341988,#341989); +#341987 = CARTESIAN_POINT('',(121.93749836622,-101.5624983662,1.55)); +#341988 = DIRECTION('',(0.,0.,-1.)); +#341989 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#341990 = ORIENTED_EDGE('',*,*,#341991,.F.); +#341991 = EDGE_CURVE('',#341992,#341983,#341994,.T.); +#341992 = VERTEX_POINT('',#341993); +#341993 = CARTESIAN_POINT('',(121.9375,-101.375,1.51)); +#341994 = LINE('',#341995,#341996); +#341995 = CARTESIAN_POINT('',(121.9375,-101.375,1.51)); +#341996 = VECTOR('',#341997,1.); +#341997 = DIRECTION('',(0.,0.,1.)); +#341998 = ORIENTED_EDGE('',*,*,#341999,.F.); +#341999 = EDGE_CURVE('',#341973,#341992,#342000,.T.); +#342000 = CIRCLE('',#342001,0.187498366229); +#342001 = AXIS2_PLACEMENT_3D('',#342002,#342003,#342004); +#342002 = CARTESIAN_POINT('',(121.93749836622,-101.5624983662,1.51)); +#342003 = DIRECTION('',(0.,0.,-1.)); +#342004 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#342005 = CYLINDRICAL_SURFACE('',#342006,0.187498366229); +#342006 = AXIS2_PLACEMENT_3D('',#342007,#342008,#342009); +#342007 = CARTESIAN_POINT('',(121.93749836622,-101.5624983662,1.51)); +#342008 = DIRECTION('',(0.,0.,-1.)); +#342009 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#342010 = ADVANCED_FACE('',(#342011),#342036,.T.); +#342011 = FACE_BOUND('',#342012,.T.); +#342012 = EDGE_LOOP('',(#342013,#342014,#342022,#342030)); +#342013 = ORIENTED_EDGE('',*,*,#341991,.T.); +#342014 = ORIENTED_EDGE('',*,*,#342015,.T.); +#342015 = EDGE_CURVE('',#341983,#342016,#342018,.T.); +#342016 = VERTEX_POINT('',#342017); +#342017 = CARTESIAN_POINT('',(123.3625,-101.375,1.55)); +#342018 = LINE('',#342019,#342020); +#342019 = CARTESIAN_POINT('',(121.9375,-101.375,1.55)); +#342020 = VECTOR('',#342021,1.); +#342021 = DIRECTION('',(1.,0.,0.)); +#342022 = ORIENTED_EDGE('',*,*,#342023,.F.); +#342023 = EDGE_CURVE('',#342024,#342016,#342026,.T.); +#342024 = VERTEX_POINT('',#342025); +#342025 = CARTESIAN_POINT('',(123.3625,-101.375,1.51)); +#342026 = LINE('',#342027,#342028); +#342027 = CARTESIAN_POINT('',(123.3625,-101.375,1.51)); +#342028 = VECTOR('',#342029,1.); +#342029 = DIRECTION('',(0.,0.,1.)); +#342030 = ORIENTED_EDGE('',*,*,#342031,.F.); +#342031 = EDGE_CURVE('',#341992,#342024,#342032,.T.); +#342032 = LINE('',#342033,#342034); +#342033 = CARTESIAN_POINT('',(121.9375,-101.375,1.51)); +#342034 = VECTOR('',#342035,1.); +#342035 = DIRECTION('',(1.,0.,0.)); +#342036 = PLANE('',#342037); +#342037 = AXIS2_PLACEMENT_3D('',#342038,#342039,#342040); +#342038 = CARTESIAN_POINT('',(121.9375,-101.375,1.51)); +#342039 = DIRECTION('',(0.,1.,0.)); +#342040 = DIRECTION('',(1.,0.,0.)); +#342041 = ADVANCED_FACE('',(#342042),#342069,.T.); +#342042 = FACE_BOUND('',#342043,.T.); +#342043 = EDGE_LOOP('',(#342044,#342045,#342054,#342062)); +#342044 = ORIENTED_EDGE('',*,*,#342023,.T.); +#342045 = ORIENTED_EDGE('',*,*,#342046,.T.); +#342046 = EDGE_CURVE('',#342016,#342047,#342049,.T.); +#342047 = VERTEX_POINT('',#342048); +#342048 = CARTESIAN_POINT('',(123.55,-101.5625,1.55)); +#342049 = CIRCLE('',#342050,0.187498366229); +#342050 = AXIS2_PLACEMENT_3D('',#342051,#342052,#342053); +#342051 = CARTESIAN_POINT('',(123.36250163377,-101.5624983662,1.55)); +#342052 = DIRECTION('',(0.,0.,-1.)); +#342053 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342054 = ORIENTED_EDGE('',*,*,#342055,.F.); +#342055 = EDGE_CURVE('',#342056,#342047,#342058,.T.); +#342056 = VERTEX_POINT('',#342057); +#342057 = CARTESIAN_POINT('',(123.55,-101.5625,1.51)); +#342058 = LINE('',#342059,#342060); +#342059 = CARTESIAN_POINT('',(123.55,-101.5625,1.51)); +#342060 = VECTOR('',#342061,1.); +#342061 = DIRECTION('',(0.,0.,1.)); +#342062 = ORIENTED_EDGE('',*,*,#342063,.F.); +#342063 = EDGE_CURVE('',#342024,#342056,#342064,.T.); +#342064 = CIRCLE('',#342065,0.187498366229); +#342065 = AXIS2_PLACEMENT_3D('',#342066,#342067,#342068); +#342066 = CARTESIAN_POINT('',(123.36250163377,-101.5624983662,1.51)); +#342067 = DIRECTION('',(0.,0.,-1.)); +#342068 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342069 = CYLINDRICAL_SURFACE('',#342070,0.187498366229); +#342070 = AXIS2_PLACEMENT_3D('',#342071,#342072,#342073); +#342071 = CARTESIAN_POINT('',(123.36250163377,-101.5624983662,1.51)); +#342072 = DIRECTION('',(0.,0.,-1.)); +#342073 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342074 = ADVANCED_FACE('',(#342075),#342100,.T.); +#342075 = FACE_BOUND('',#342076,.T.); +#342076 = EDGE_LOOP('',(#342077,#342078,#342086,#342094)); +#342077 = ORIENTED_EDGE('',*,*,#342055,.T.); +#342078 = ORIENTED_EDGE('',*,*,#342079,.T.); +#342079 = EDGE_CURVE('',#342047,#342080,#342082,.T.); +#342080 = VERTEX_POINT('',#342081); +#342081 = CARTESIAN_POINT('',(123.55,-101.9375,1.55)); +#342082 = LINE('',#342083,#342084); +#342083 = CARTESIAN_POINT('',(123.55,-101.5625,1.55)); +#342084 = VECTOR('',#342085,1.); +#342085 = DIRECTION('',(0.,-1.,0.)); +#342086 = ORIENTED_EDGE('',*,*,#342087,.F.); +#342087 = EDGE_CURVE('',#342088,#342080,#342090,.T.); +#342088 = VERTEX_POINT('',#342089); +#342089 = CARTESIAN_POINT('',(123.55,-101.9375,1.51)); +#342090 = LINE('',#342091,#342092); +#342091 = CARTESIAN_POINT('',(123.55,-101.9375,1.51)); +#342092 = VECTOR('',#342093,1.); +#342093 = DIRECTION('',(0.,0.,1.)); +#342094 = ORIENTED_EDGE('',*,*,#342095,.F.); +#342095 = EDGE_CURVE('',#342056,#342088,#342096,.T.); +#342096 = LINE('',#342097,#342098); +#342097 = CARTESIAN_POINT('',(123.55,-101.5625,1.51)); +#342098 = VECTOR('',#342099,1.); +#342099 = DIRECTION('',(0.,-1.,0.)); +#342100 = PLANE('',#342101); +#342101 = AXIS2_PLACEMENT_3D('',#342102,#342103,#342104); +#342102 = CARTESIAN_POINT('',(123.55,-101.5625,1.51)); +#342103 = DIRECTION('',(1.,0.,-0.)); +#342104 = DIRECTION('',(0.,-1.,0.)); +#342105 = ADVANCED_FACE('',(#342106),#342133,.T.); +#342106 = FACE_BOUND('',#342107,.T.); +#342107 = EDGE_LOOP('',(#342108,#342109,#342118,#342126)); +#342108 = ORIENTED_EDGE('',*,*,#342087,.T.); +#342109 = ORIENTED_EDGE('',*,*,#342110,.T.); +#342110 = EDGE_CURVE('',#342080,#342111,#342113,.T.); +#342111 = VERTEX_POINT('',#342112); +#342112 = CARTESIAN_POINT('',(123.3625,-102.125,1.55)); +#342113 = CIRCLE('',#342114,0.187498366229); +#342114 = AXIS2_PLACEMENT_3D('',#342115,#342116,#342117); +#342115 = CARTESIAN_POINT('',(123.36250163377,-101.9375016337,1.55)); +#342116 = DIRECTION('',(0.,0.,-1.)); +#342117 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342118 = ORIENTED_EDGE('',*,*,#342119,.F.); +#342119 = EDGE_CURVE('',#342120,#342111,#342122,.T.); +#342120 = VERTEX_POINT('',#342121); +#342121 = CARTESIAN_POINT('',(123.3625,-102.125,1.51)); +#342122 = LINE('',#342123,#342124); +#342123 = CARTESIAN_POINT('',(123.3625,-102.125,1.51)); +#342124 = VECTOR('',#342125,1.); +#342125 = DIRECTION('',(0.,0.,1.)); +#342126 = ORIENTED_EDGE('',*,*,#342127,.F.); +#342127 = EDGE_CURVE('',#342088,#342120,#342128,.T.); +#342128 = CIRCLE('',#342129,0.187498366229); +#342129 = AXIS2_PLACEMENT_3D('',#342130,#342131,#342132); +#342130 = CARTESIAN_POINT('',(123.36250163377,-101.9375016337,1.51)); +#342131 = DIRECTION('',(0.,0.,-1.)); +#342132 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342133 = CYLINDRICAL_SURFACE('',#342134,0.187498366229); +#342134 = AXIS2_PLACEMENT_3D('',#342135,#342136,#342137); +#342135 = CARTESIAN_POINT('',(123.36250163377,-101.9375016337,1.51)); +#342136 = DIRECTION('',(0.,0.,-1.)); +#342137 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342138 = ADVANCED_FACE('',(#342139),#342164,.T.); +#342139 = FACE_BOUND('',#342140,.T.); +#342140 = EDGE_LOOP('',(#342141,#342142,#342150,#342158)); +#342141 = ORIENTED_EDGE('',*,*,#342119,.T.); +#342142 = ORIENTED_EDGE('',*,*,#342143,.T.); +#342143 = EDGE_CURVE('',#342111,#342144,#342146,.T.); +#342144 = VERTEX_POINT('',#342145); +#342145 = CARTESIAN_POINT('',(121.9375,-102.125,1.55)); +#342146 = LINE('',#342147,#342148); +#342147 = CARTESIAN_POINT('',(123.3625,-102.125,1.55)); +#342148 = VECTOR('',#342149,1.); +#342149 = DIRECTION('',(-1.,0.,0.)); +#342150 = ORIENTED_EDGE('',*,*,#342151,.F.); +#342151 = EDGE_CURVE('',#342152,#342144,#342154,.T.); +#342152 = VERTEX_POINT('',#342153); +#342153 = CARTESIAN_POINT('',(121.9375,-102.125,1.51)); +#342154 = LINE('',#342155,#342156); +#342155 = CARTESIAN_POINT('',(121.9375,-102.125,1.51)); +#342156 = VECTOR('',#342157,1.); +#342157 = DIRECTION('',(0.,0.,1.)); +#342158 = ORIENTED_EDGE('',*,*,#342159,.F.); +#342159 = EDGE_CURVE('',#342120,#342152,#342160,.T.); +#342160 = LINE('',#342161,#342162); +#342161 = CARTESIAN_POINT('',(123.3625,-102.125,1.51)); +#342162 = VECTOR('',#342163,1.); +#342163 = DIRECTION('',(-1.,0.,0.)); +#342164 = PLANE('',#342165); +#342165 = AXIS2_PLACEMENT_3D('',#342166,#342167,#342168); +#342166 = CARTESIAN_POINT('',(123.3625,-102.125,1.51)); +#342167 = DIRECTION('',(0.,-1.,0.)); +#342168 = DIRECTION('',(-1.,0.,0.)); +#342169 = ADVANCED_FACE('',(#342170),#342197,.T.); +#342170 = FACE_BOUND('',#342171,.T.); +#342171 = EDGE_LOOP('',(#342172,#342173,#342182,#342190)); +#342172 = ORIENTED_EDGE('',*,*,#342151,.T.); +#342173 = ORIENTED_EDGE('',*,*,#342174,.T.); +#342174 = EDGE_CURVE('',#342144,#342175,#342177,.T.); +#342175 = VERTEX_POINT('',#342176); +#342176 = CARTESIAN_POINT('',(121.75,-101.9375,1.55)); +#342177 = CIRCLE('',#342178,0.187498366229); +#342178 = AXIS2_PLACEMENT_3D('',#342179,#342180,#342181); +#342179 = CARTESIAN_POINT('',(121.93749836622,-101.9375016337,1.55)); +#342180 = DIRECTION('',(0.,0.,-1.)); +#342181 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342182 = ORIENTED_EDGE('',*,*,#342183,.F.); +#342183 = EDGE_CURVE('',#342184,#342175,#342186,.T.); +#342184 = VERTEX_POINT('',#342185); +#342185 = CARTESIAN_POINT('',(121.75,-101.9375,1.51)); +#342186 = LINE('',#342187,#342188); +#342187 = CARTESIAN_POINT('',(121.75,-101.9375,1.51)); +#342188 = VECTOR('',#342189,1.); +#342189 = DIRECTION('',(0.,0.,1.)); +#342190 = ORIENTED_EDGE('',*,*,#342191,.F.); +#342191 = EDGE_CURVE('',#342152,#342184,#342192,.T.); +#342192 = CIRCLE('',#342193,0.187498366229); +#342193 = AXIS2_PLACEMENT_3D('',#342194,#342195,#342196); +#342194 = CARTESIAN_POINT('',(121.93749836622,-101.9375016337,1.51)); +#342195 = DIRECTION('',(0.,0.,-1.)); +#342196 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342197 = CYLINDRICAL_SURFACE('',#342198,0.187498366229); +#342198 = AXIS2_PLACEMENT_3D('',#342199,#342200,#342201); +#342199 = CARTESIAN_POINT('',(121.93749836622,-101.9375016337,1.51)); +#342200 = DIRECTION('',(0.,0.,-1.)); +#342201 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342202 = ADVANCED_FACE('',(#342203),#342219,.T.); +#342203 = FACE_BOUND('',#342204,.T.); +#342204 = EDGE_LOOP('',(#342205,#342206,#342212,#342213)); +#342205 = ORIENTED_EDGE('',*,*,#342183,.T.); +#342206 = ORIENTED_EDGE('',*,*,#342207,.T.); +#342207 = EDGE_CURVE('',#342175,#341975,#342208,.T.); +#342208 = LINE('',#342209,#342210); +#342209 = CARTESIAN_POINT('',(121.75,-101.9375,1.55)); +#342210 = VECTOR('',#342211,1.); +#342211 = DIRECTION('',(0.,1.,0.)); +#342212 = ORIENTED_EDGE('',*,*,#341972,.F.); +#342213 = ORIENTED_EDGE('',*,*,#342214,.F.); +#342214 = EDGE_CURVE('',#342184,#341973,#342215,.T.); +#342215 = LINE('',#342216,#342217); +#342216 = CARTESIAN_POINT('',(121.75,-101.9375,1.51)); +#342217 = VECTOR('',#342218,1.); +#342218 = DIRECTION('',(0.,1.,0.)); +#342219 = PLANE('',#342220); +#342220 = AXIS2_PLACEMENT_3D('',#342221,#342222,#342223); +#342221 = CARTESIAN_POINT('',(121.75,-101.9375,1.51)); +#342222 = DIRECTION('',(-1.,0.,0.)); +#342223 = DIRECTION('',(0.,1.,0.)); +#342224 = ADVANCED_FACE('',(#342225),#342235,.F.); +#342225 = FACE_BOUND('',#342226,.T.); +#342226 = EDGE_LOOP('',(#342227,#342228,#342229,#342230,#342231,#342232, + #342233,#342234)); +#342227 = ORIENTED_EDGE('',*,*,#341999,.T.); +#342228 = ORIENTED_EDGE('',*,*,#342031,.T.); +#342229 = ORIENTED_EDGE('',*,*,#342063,.T.); +#342230 = ORIENTED_EDGE('',*,*,#342095,.T.); +#342231 = ORIENTED_EDGE('',*,*,#342127,.T.); +#342232 = ORIENTED_EDGE('',*,*,#342159,.T.); +#342233 = ORIENTED_EDGE('',*,*,#342191,.T.); +#342234 = ORIENTED_EDGE('',*,*,#342214,.T.); +#342235 = PLANE('',#342236); +#342236 = AXIS2_PLACEMENT_3D('',#342237,#342238,#342239); +#342237 = CARTESIAN_POINT('',(0.,0.,1.51)); +#342238 = DIRECTION('',(0.,0.,1.)); +#342239 = DIRECTION('',(1.,0.,-0.)); +#342240 = ADVANCED_FACE('',(#342241),#342251,.T.); +#342241 = FACE_BOUND('',#342242,.F.); +#342242 = EDGE_LOOP('',(#342243,#342244,#342245,#342246,#342247,#342248, + #342249,#342250)); +#342243 = ORIENTED_EDGE('',*,*,#341982,.T.); +#342244 = ORIENTED_EDGE('',*,*,#342015,.T.); +#342245 = ORIENTED_EDGE('',*,*,#342046,.T.); +#342246 = ORIENTED_EDGE('',*,*,#342079,.T.); +#342247 = ORIENTED_EDGE('',*,*,#342110,.T.); +#342248 = ORIENTED_EDGE('',*,*,#342143,.T.); +#342249 = ORIENTED_EDGE('',*,*,#342174,.T.); +#342250 = ORIENTED_EDGE('',*,*,#342207,.T.); +#342251 = PLANE('',#342252); +#342252 = AXIS2_PLACEMENT_3D('',#342253,#342254,#342255); +#342253 = CARTESIAN_POINT('',(0.,0.,1.55)); +#342254 = DIRECTION('',(0.,0.,1.)); +#342255 = DIRECTION('',(1.,0.,-0.)); +#342256 = MANIFOLD_SOLID_BREP('',#342257); +#342257 = CLOSED_SHELL('',(#342258,#342298,#342329,#342360,#342382, + #342394)); +#342258 = ADVANCED_FACE('',(#342259),#342293,.T.); +#342259 = FACE_BOUND('',#342260,.T.); +#342260 = EDGE_LOOP('',(#342261,#342271,#342279,#342287)); +#342261 = ORIENTED_EDGE('',*,*,#342262,.T.); +#342262 = EDGE_CURVE('',#342263,#342265,#342267,.T.); +#342263 = VERTEX_POINT('',#342264); +#342264 = CARTESIAN_POINT('',(128.5,-75.26,1.51)); +#342265 = VERTEX_POINT('',#342266); +#342266 = CARTESIAN_POINT('',(128.5,-75.26,1.55)); +#342267 = LINE('',#342268,#342269); +#342268 = CARTESIAN_POINT('',(128.5,-75.26,1.51)); +#342269 = VECTOR('',#342270,1.); +#342270 = DIRECTION('',(0.,0.,1.)); +#342271 = ORIENTED_EDGE('',*,*,#342272,.T.); +#342272 = EDGE_CURVE('',#342265,#342273,#342275,.T.); +#342273 = VERTEX_POINT('',#342274); +#342274 = CARTESIAN_POINT('',(128.5,-74.36,1.55)); +#342275 = LINE('',#342276,#342277); +#342276 = CARTESIAN_POINT('',(128.5,-75.26,1.55)); +#342277 = VECTOR('',#342278,1.); +#342278 = DIRECTION('',(0.,1.,0.)); +#342279 = ORIENTED_EDGE('',*,*,#342280,.F.); +#342280 = EDGE_CURVE('',#342281,#342273,#342283,.T.); +#342281 = VERTEX_POINT('',#342282); +#342282 = CARTESIAN_POINT('',(128.5,-74.36,1.51)); +#342283 = LINE('',#342284,#342285); +#342284 = CARTESIAN_POINT('',(128.5,-74.36,1.51)); +#342285 = VECTOR('',#342286,1.); +#342286 = DIRECTION('',(0.,0.,1.)); +#342287 = ORIENTED_EDGE('',*,*,#342288,.F.); +#342288 = EDGE_CURVE('',#342263,#342281,#342289,.T.); +#342289 = LINE('',#342290,#342291); +#342290 = CARTESIAN_POINT('',(128.5,-75.26,1.51)); +#342291 = VECTOR('',#342292,1.); +#342292 = DIRECTION('',(0.,1.,0.)); +#342293 = PLANE('',#342294); +#342294 = AXIS2_PLACEMENT_3D('',#342295,#342296,#342297); +#342295 = CARTESIAN_POINT('',(128.5,-75.26,1.51)); +#342296 = DIRECTION('',(-1.,0.,0.)); +#342297 = DIRECTION('',(0.,1.,0.)); +#342298 = ADVANCED_FACE('',(#342299),#342324,.T.); +#342299 = FACE_BOUND('',#342300,.T.); +#342300 = EDGE_LOOP('',(#342301,#342302,#342310,#342318)); +#342301 = ORIENTED_EDGE('',*,*,#342280,.T.); +#342302 = ORIENTED_EDGE('',*,*,#342303,.T.); +#342303 = EDGE_CURVE('',#342273,#342304,#342306,.T.); +#342304 = VERTEX_POINT('',#342305); +#342305 = CARTESIAN_POINT('',(130.,-74.36,1.55)); +#342306 = LINE('',#342307,#342308); +#342307 = CARTESIAN_POINT('',(128.5,-74.36,1.55)); +#342308 = VECTOR('',#342309,1.); +#342309 = DIRECTION('',(1.,0.,0.)); +#342310 = ORIENTED_EDGE('',*,*,#342311,.F.); +#342311 = EDGE_CURVE('',#342312,#342304,#342314,.T.); +#342312 = VERTEX_POINT('',#342313); +#342313 = CARTESIAN_POINT('',(130.,-74.36,1.51)); +#342314 = LINE('',#342315,#342316); +#342315 = CARTESIAN_POINT('',(130.,-74.36,1.51)); +#342316 = VECTOR('',#342317,1.); +#342317 = DIRECTION('',(0.,0.,1.)); +#342318 = ORIENTED_EDGE('',*,*,#342319,.F.); +#342319 = EDGE_CURVE('',#342281,#342312,#342320,.T.); +#342320 = LINE('',#342321,#342322); +#342321 = CARTESIAN_POINT('',(128.5,-74.36,1.51)); +#342322 = VECTOR('',#342323,1.); +#342323 = DIRECTION('',(1.,0.,0.)); +#342324 = PLANE('',#342325); +#342325 = AXIS2_PLACEMENT_3D('',#342326,#342327,#342328); +#342326 = CARTESIAN_POINT('',(128.5,-74.36,1.51)); +#342327 = DIRECTION('',(0.,1.,0.)); +#342328 = DIRECTION('',(1.,0.,0.)); +#342329 = ADVANCED_FACE('',(#342330),#342355,.T.); +#342330 = FACE_BOUND('',#342331,.T.); +#342331 = EDGE_LOOP('',(#342332,#342333,#342341,#342349)); +#342332 = ORIENTED_EDGE('',*,*,#342311,.T.); +#342333 = ORIENTED_EDGE('',*,*,#342334,.T.); +#342334 = EDGE_CURVE('',#342304,#342335,#342337,.T.); +#342335 = VERTEX_POINT('',#342336); +#342336 = CARTESIAN_POINT('',(130.,-75.26,1.55)); +#342337 = LINE('',#342338,#342339); +#342338 = CARTESIAN_POINT('',(130.,-74.36,1.55)); +#342339 = VECTOR('',#342340,1.); +#342340 = DIRECTION('',(0.,-1.,0.)); +#342341 = ORIENTED_EDGE('',*,*,#342342,.F.); +#342342 = EDGE_CURVE('',#342343,#342335,#342345,.T.); +#342343 = VERTEX_POINT('',#342344); +#342344 = CARTESIAN_POINT('',(130.,-75.26,1.51)); +#342345 = LINE('',#342346,#342347); +#342346 = CARTESIAN_POINT('',(130.,-75.26,1.51)); +#342347 = VECTOR('',#342348,1.); +#342348 = DIRECTION('',(0.,0.,1.)); +#342349 = ORIENTED_EDGE('',*,*,#342350,.F.); +#342350 = EDGE_CURVE('',#342312,#342343,#342351,.T.); +#342351 = LINE('',#342352,#342353); +#342352 = CARTESIAN_POINT('',(130.,-74.36,1.51)); +#342353 = VECTOR('',#342354,1.); +#342354 = DIRECTION('',(0.,-1.,0.)); +#342355 = PLANE('',#342356); +#342356 = AXIS2_PLACEMENT_3D('',#342357,#342358,#342359); +#342357 = CARTESIAN_POINT('',(130.,-74.36,1.51)); +#342358 = DIRECTION('',(1.,0.,-0.)); +#342359 = DIRECTION('',(0.,-1.,0.)); +#342360 = ADVANCED_FACE('',(#342361),#342377,.T.); +#342361 = FACE_BOUND('',#342362,.T.); +#342362 = EDGE_LOOP('',(#342363,#342364,#342370,#342371)); +#342363 = ORIENTED_EDGE('',*,*,#342342,.T.); +#342364 = ORIENTED_EDGE('',*,*,#342365,.T.); +#342365 = EDGE_CURVE('',#342335,#342265,#342366,.T.); +#342366 = LINE('',#342367,#342368); +#342367 = CARTESIAN_POINT('',(130.,-75.26,1.55)); +#342368 = VECTOR('',#342369,1.); +#342369 = DIRECTION('',(-1.,0.,0.)); +#342370 = ORIENTED_EDGE('',*,*,#342262,.F.); +#342371 = ORIENTED_EDGE('',*,*,#342372,.F.); +#342372 = EDGE_CURVE('',#342343,#342263,#342373,.T.); +#342373 = LINE('',#342374,#342375); +#342374 = CARTESIAN_POINT('',(130.,-75.26,1.51)); +#342375 = VECTOR('',#342376,1.); +#342376 = DIRECTION('',(-1.,0.,0.)); +#342377 = PLANE('',#342378); +#342378 = AXIS2_PLACEMENT_3D('',#342379,#342380,#342381); +#342379 = CARTESIAN_POINT('',(130.,-75.26,1.51)); +#342380 = DIRECTION('',(0.,-1.,0.)); +#342381 = DIRECTION('',(-1.,0.,0.)); +#342382 = ADVANCED_FACE('',(#342383),#342389,.F.); +#342383 = FACE_BOUND('',#342384,.T.); +#342384 = EDGE_LOOP('',(#342385,#342386,#342387,#342388)); +#342385 = ORIENTED_EDGE('',*,*,#342288,.T.); +#342386 = ORIENTED_EDGE('',*,*,#342319,.T.); +#342387 = ORIENTED_EDGE('',*,*,#342350,.T.); +#342388 = ORIENTED_EDGE('',*,*,#342372,.T.); +#342389 = PLANE('',#342390); +#342390 = AXIS2_PLACEMENT_3D('',#342391,#342392,#342393); +#342391 = CARTESIAN_POINT('',(0.,0.,1.51)); +#342392 = DIRECTION('',(0.,0.,1.)); +#342393 = DIRECTION('',(1.,0.,-0.)); +#342394 = ADVANCED_FACE('',(#342395),#342401,.T.); +#342395 = FACE_BOUND('',#342396,.F.); +#342396 = EDGE_LOOP('',(#342397,#342398,#342399,#342400)); +#342397 = ORIENTED_EDGE('',*,*,#342272,.T.); +#342398 = ORIENTED_EDGE('',*,*,#342303,.T.); +#342399 = ORIENTED_EDGE('',*,*,#342334,.T.); +#342400 = ORIENTED_EDGE('',*,*,#342365,.T.); +#342401 = PLANE('',#342402); +#342402 = AXIS2_PLACEMENT_3D('',#342403,#342404,#342405); +#342403 = CARTESIAN_POINT('',(0.,0.,1.55)); +#342404 = DIRECTION('',(0.,0.,1.)); +#342405 = DIRECTION('',(1.,0.,-0.)); +#342406 = MANIFOLD_SOLID_BREP('',#342407); +#342407 = CLOSED_SHELL('',(#342408,#342450,#342481,#342514,#342545, + #342578,#342609,#342642,#342664,#342680)); +#342408 = ADVANCED_FACE('',(#342409),#342445,.T.); +#342409 = FACE_BOUND('',#342410,.T.); +#342410 = EDGE_LOOP('',(#342411,#342421,#342430,#342438)); +#342411 = ORIENTED_EDGE('',*,*,#342412,.T.); +#342412 = EDGE_CURVE('',#342413,#342415,#342417,.T.); +#342413 = VERTEX_POINT('',#342414); +#342414 = CARTESIAN_POINT('',(121.75,-89.0875,1.51)); +#342415 = VERTEX_POINT('',#342416); +#342416 = CARTESIAN_POINT('',(121.75,-89.0875,1.55)); +#342417 = LINE('',#342418,#342419); +#342418 = CARTESIAN_POINT('',(121.75,-89.0875,1.51)); +#342419 = VECTOR('',#342420,1.); +#342420 = DIRECTION('',(0.,0.,1.)); +#342421 = ORIENTED_EDGE('',*,*,#342422,.T.); +#342422 = EDGE_CURVE('',#342415,#342423,#342425,.T.); +#342423 = VERTEX_POINT('',#342424); +#342424 = CARTESIAN_POINT('',(121.9375,-88.9,1.55)); +#342425 = CIRCLE('',#342426,0.187498366229); +#342426 = AXIS2_PLACEMENT_3D('',#342427,#342428,#342429); +#342427 = CARTESIAN_POINT('',(121.93749836622,-89.08749836622,1.55)); +#342428 = DIRECTION('',(0.,0.,-1.)); +#342429 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#342430 = ORIENTED_EDGE('',*,*,#342431,.F.); +#342431 = EDGE_CURVE('',#342432,#342423,#342434,.T.); +#342432 = VERTEX_POINT('',#342433); +#342433 = CARTESIAN_POINT('',(121.9375,-88.9,1.51)); +#342434 = LINE('',#342435,#342436); +#342435 = CARTESIAN_POINT('',(121.9375,-88.9,1.51)); +#342436 = VECTOR('',#342437,1.); +#342437 = DIRECTION('',(0.,0.,1.)); +#342438 = ORIENTED_EDGE('',*,*,#342439,.F.); +#342439 = EDGE_CURVE('',#342413,#342432,#342440,.T.); +#342440 = CIRCLE('',#342441,0.187498366229); +#342441 = AXIS2_PLACEMENT_3D('',#342442,#342443,#342444); +#342442 = CARTESIAN_POINT('',(121.93749836622,-89.08749836622,1.51)); +#342443 = DIRECTION('',(0.,0.,-1.)); +#342444 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#342445 = CYLINDRICAL_SURFACE('',#342446,0.187498366229); +#342446 = AXIS2_PLACEMENT_3D('',#342447,#342448,#342449); +#342447 = CARTESIAN_POINT('',(121.93749836622,-89.08749836622,1.51)); +#342448 = DIRECTION('',(0.,0.,-1.)); +#342449 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#342450 = ADVANCED_FACE('',(#342451),#342476,.T.); +#342451 = FACE_BOUND('',#342452,.T.); +#342452 = EDGE_LOOP('',(#342453,#342454,#342462,#342470)); +#342453 = ORIENTED_EDGE('',*,*,#342431,.T.); +#342454 = ORIENTED_EDGE('',*,*,#342455,.T.); +#342455 = EDGE_CURVE('',#342423,#342456,#342458,.T.); +#342456 = VERTEX_POINT('',#342457); +#342457 = CARTESIAN_POINT('',(123.3625,-88.9,1.55)); +#342458 = LINE('',#342459,#342460); +#342459 = CARTESIAN_POINT('',(121.9375,-88.9,1.55)); +#342460 = VECTOR('',#342461,1.); +#342461 = DIRECTION('',(1.,0.,0.)); +#342462 = ORIENTED_EDGE('',*,*,#342463,.F.); +#342463 = EDGE_CURVE('',#342464,#342456,#342466,.T.); +#342464 = VERTEX_POINT('',#342465); +#342465 = CARTESIAN_POINT('',(123.3625,-88.9,1.51)); +#342466 = LINE('',#342467,#342468); +#342467 = CARTESIAN_POINT('',(123.3625,-88.9,1.51)); +#342468 = VECTOR('',#342469,1.); +#342469 = DIRECTION('',(0.,0.,1.)); +#342470 = ORIENTED_EDGE('',*,*,#342471,.F.); +#342471 = EDGE_CURVE('',#342432,#342464,#342472,.T.); +#342472 = LINE('',#342473,#342474); +#342473 = CARTESIAN_POINT('',(121.9375,-88.9,1.51)); +#342474 = VECTOR('',#342475,1.); +#342475 = DIRECTION('',(1.,0.,0.)); +#342476 = PLANE('',#342477); +#342477 = AXIS2_PLACEMENT_3D('',#342478,#342479,#342480); +#342478 = CARTESIAN_POINT('',(121.9375,-88.9,1.51)); +#342479 = DIRECTION('',(0.,1.,0.)); +#342480 = DIRECTION('',(1.,0.,0.)); +#342481 = ADVANCED_FACE('',(#342482),#342509,.T.); +#342482 = FACE_BOUND('',#342483,.T.); +#342483 = EDGE_LOOP('',(#342484,#342485,#342494,#342502)); +#342484 = ORIENTED_EDGE('',*,*,#342463,.T.); +#342485 = ORIENTED_EDGE('',*,*,#342486,.T.); +#342486 = EDGE_CURVE('',#342456,#342487,#342489,.T.); +#342487 = VERTEX_POINT('',#342488); +#342488 = CARTESIAN_POINT('',(123.55,-89.0875,1.55)); +#342489 = CIRCLE('',#342490,0.187498366229); +#342490 = AXIS2_PLACEMENT_3D('',#342491,#342492,#342493); +#342491 = CARTESIAN_POINT('',(123.36250163377,-89.08749836622,1.55)); +#342492 = DIRECTION('',(0.,0.,-1.)); +#342493 = DIRECTION('',(-8.713558506504E-06,0.999999999962,0.)); +#342494 = ORIENTED_EDGE('',*,*,#342495,.F.); +#342495 = EDGE_CURVE('',#342496,#342487,#342498,.T.); +#342496 = VERTEX_POINT('',#342497); +#342497 = CARTESIAN_POINT('',(123.55,-89.0875,1.51)); +#342498 = LINE('',#342499,#342500); +#342499 = CARTESIAN_POINT('',(123.55,-89.0875,1.51)); +#342500 = VECTOR('',#342501,1.); +#342501 = DIRECTION('',(0.,0.,1.)); +#342502 = ORIENTED_EDGE('',*,*,#342503,.F.); +#342503 = EDGE_CURVE('',#342464,#342496,#342504,.T.); +#342504 = CIRCLE('',#342505,0.187498366229); +#342505 = AXIS2_PLACEMENT_3D('',#342506,#342507,#342508); +#342506 = CARTESIAN_POINT('',(123.36250163377,-89.08749836622,1.51)); +#342507 = DIRECTION('',(0.,0.,-1.)); +#342508 = DIRECTION('',(-8.713558506504E-06,0.999999999962,0.)); +#342509 = CYLINDRICAL_SURFACE('',#342510,0.187498366229); +#342510 = AXIS2_PLACEMENT_3D('',#342511,#342512,#342513); +#342511 = CARTESIAN_POINT('',(123.36250163377,-89.08749836622,1.51)); +#342512 = DIRECTION('',(0.,0.,-1.)); +#342513 = DIRECTION('',(-8.713558506504E-06,0.999999999962,0.)); +#342514 = ADVANCED_FACE('',(#342515),#342540,.T.); +#342515 = FACE_BOUND('',#342516,.T.); +#342516 = EDGE_LOOP('',(#342517,#342518,#342526,#342534)); +#342517 = ORIENTED_EDGE('',*,*,#342495,.T.); +#342518 = ORIENTED_EDGE('',*,*,#342519,.T.); +#342519 = EDGE_CURVE('',#342487,#342520,#342522,.T.); +#342520 = VERTEX_POINT('',#342521); +#342521 = CARTESIAN_POINT('',(123.55,-89.4625,1.55)); +#342522 = LINE('',#342523,#342524); +#342523 = CARTESIAN_POINT('',(123.55,-89.0875,1.55)); +#342524 = VECTOR('',#342525,1.); +#342525 = DIRECTION('',(0.,-1.,0.)); +#342526 = ORIENTED_EDGE('',*,*,#342527,.F.); +#342527 = EDGE_CURVE('',#342528,#342520,#342530,.T.); +#342528 = VERTEX_POINT('',#342529); +#342529 = CARTESIAN_POINT('',(123.55,-89.4625,1.51)); +#342530 = LINE('',#342531,#342532); +#342531 = CARTESIAN_POINT('',(123.55,-89.4625,1.51)); +#342532 = VECTOR('',#342533,1.); +#342533 = DIRECTION('',(0.,0.,1.)); +#342534 = ORIENTED_EDGE('',*,*,#342535,.F.); +#342535 = EDGE_CURVE('',#342496,#342528,#342536,.T.); +#342536 = LINE('',#342537,#342538); +#342537 = CARTESIAN_POINT('',(123.55,-89.0875,1.51)); +#342538 = VECTOR('',#342539,1.); +#342539 = DIRECTION('',(0.,-1.,0.)); +#342540 = PLANE('',#342541); +#342541 = AXIS2_PLACEMENT_3D('',#342542,#342543,#342544); +#342542 = CARTESIAN_POINT('',(123.55,-89.0875,1.51)); +#342543 = DIRECTION('',(1.,0.,-0.)); +#342544 = DIRECTION('',(0.,-1.,0.)); +#342545 = ADVANCED_FACE('',(#342546),#342573,.T.); +#342546 = FACE_BOUND('',#342547,.T.); +#342547 = EDGE_LOOP('',(#342548,#342549,#342558,#342566)); +#342548 = ORIENTED_EDGE('',*,*,#342527,.T.); +#342549 = ORIENTED_EDGE('',*,*,#342550,.T.); +#342550 = EDGE_CURVE('',#342520,#342551,#342553,.T.); +#342551 = VERTEX_POINT('',#342552); +#342552 = CARTESIAN_POINT('',(123.3625,-89.65,1.55)); +#342553 = CIRCLE('',#342554,0.187498366229); +#342554 = AXIS2_PLACEMENT_3D('',#342555,#342556,#342557); +#342555 = CARTESIAN_POINT('',(123.36250163377,-89.46250163377,1.55)); +#342556 = DIRECTION('',(0.,0.,-1.)); +#342557 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342558 = ORIENTED_EDGE('',*,*,#342559,.F.); +#342559 = EDGE_CURVE('',#342560,#342551,#342562,.T.); +#342560 = VERTEX_POINT('',#342561); +#342561 = CARTESIAN_POINT('',(123.3625,-89.65,1.51)); +#342562 = LINE('',#342563,#342564); +#342563 = CARTESIAN_POINT('',(123.3625,-89.65,1.51)); +#342564 = VECTOR('',#342565,1.); +#342565 = DIRECTION('',(0.,0.,1.)); +#342566 = ORIENTED_EDGE('',*,*,#342567,.F.); +#342567 = EDGE_CURVE('',#342528,#342560,#342568,.T.); +#342568 = CIRCLE('',#342569,0.187498366229); +#342569 = AXIS2_PLACEMENT_3D('',#342570,#342571,#342572); +#342570 = CARTESIAN_POINT('',(123.36250163377,-89.46250163377,1.51)); +#342571 = DIRECTION('',(0.,0.,-1.)); +#342572 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342573 = CYLINDRICAL_SURFACE('',#342574,0.187498366229); +#342574 = AXIS2_PLACEMENT_3D('',#342575,#342576,#342577); +#342575 = CARTESIAN_POINT('',(123.36250163377,-89.46250163377,1.51)); +#342576 = DIRECTION('',(0.,0.,-1.)); +#342577 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#342578 = ADVANCED_FACE('',(#342579),#342604,.T.); +#342579 = FACE_BOUND('',#342580,.T.); +#342580 = EDGE_LOOP('',(#342581,#342582,#342590,#342598)); +#342581 = ORIENTED_EDGE('',*,*,#342559,.T.); +#342582 = ORIENTED_EDGE('',*,*,#342583,.T.); +#342583 = EDGE_CURVE('',#342551,#342584,#342586,.T.); +#342584 = VERTEX_POINT('',#342585); +#342585 = CARTESIAN_POINT('',(121.9375,-89.65,1.55)); +#342586 = LINE('',#342587,#342588); +#342587 = CARTESIAN_POINT('',(123.3625,-89.65,1.55)); +#342588 = VECTOR('',#342589,1.); +#342589 = DIRECTION('',(-1.,0.,0.)); +#342590 = ORIENTED_EDGE('',*,*,#342591,.F.); +#342591 = EDGE_CURVE('',#342592,#342584,#342594,.T.); +#342592 = VERTEX_POINT('',#342593); +#342593 = CARTESIAN_POINT('',(121.9375,-89.65,1.51)); +#342594 = LINE('',#342595,#342596); +#342595 = CARTESIAN_POINT('',(121.9375,-89.65,1.51)); +#342596 = VECTOR('',#342597,1.); +#342597 = DIRECTION('',(0.,0.,1.)); +#342598 = ORIENTED_EDGE('',*,*,#342599,.F.); +#342599 = EDGE_CURVE('',#342560,#342592,#342600,.T.); +#342600 = LINE('',#342601,#342602); +#342601 = CARTESIAN_POINT('',(123.3625,-89.65,1.51)); +#342602 = VECTOR('',#342603,1.); +#342603 = DIRECTION('',(-1.,0.,0.)); +#342604 = PLANE('',#342605); +#342605 = AXIS2_PLACEMENT_3D('',#342606,#342607,#342608); +#342606 = CARTESIAN_POINT('',(123.3625,-89.65,1.51)); +#342607 = DIRECTION('',(0.,-1.,0.)); +#342608 = DIRECTION('',(-1.,0.,0.)); +#342609 = ADVANCED_FACE('',(#342610),#342637,.T.); +#342610 = FACE_BOUND('',#342611,.T.); +#342611 = EDGE_LOOP('',(#342612,#342613,#342622,#342630)); +#342612 = ORIENTED_EDGE('',*,*,#342591,.T.); +#342613 = ORIENTED_EDGE('',*,*,#342614,.T.); +#342614 = EDGE_CURVE('',#342584,#342615,#342617,.T.); +#342615 = VERTEX_POINT('',#342616); +#342616 = CARTESIAN_POINT('',(121.75,-89.4625,1.55)); +#342617 = CIRCLE('',#342618,0.187498366229); +#342618 = AXIS2_PLACEMENT_3D('',#342619,#342620,#342621); +#342619 = CARTESIAN_POINT('',(121.93749836622,-89.46250163377,1.55)); +#342620 = DIRECTION('',(0.,0.,-1.)); +#342621 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342622 = ORIENTED_EDGE('',*,*,#342623,.F.); +#342623 = EDGE_CURVE('',#342624,#342615,#342626,.T.); +#342624 = VERTEX_POINT('',#342625); +#342625 = CARTESIAN_POINT('',(121.75,-89.4625,1.51)); +#342626 = LINE('',#342627,#342628); +#342627 = CARTESIAN_POINT('',(121.75,-89.4625,1.51)); +#342628 = VECTOR('',#342629,1.); +#342629 = DIRECTION('',(0.,0.,1.)); +#342630 = ORIENTED_EDGE('',*,*,#342631,.F.); +#342631 = EDGE_CURVE('',#342592,#342624,#342632,.T.); +#342632 = CIRCLE('',#342633,0.187498366229); +#342633 = AXIS2_PLACEMENT_3D('',#342634,#342635,#342636); +#342634 = CARTESIAN_POINT('',(121.93749836622,-89.46250163377,1.51)); +#342635 = DIRECTION('',(0.,0.,-1.)); +#342636 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342637 = CYLINDRICAL_SURFACE('',#342638,0.187498366229); +#342638 = AXIS2_PLACEMENT_3D('',#342639,#342640,#342641); +#342639 = CARTESIAN_POINT('',(121.93749836622,-89.46250163377,1.51)); +#342640 = DIRECTION('',(0.,0.,-1.)); +#342641 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#342642 = ADVANCED_FACE('',(#342643),#342659,.T.); +#342643 = FACE_BOUND('',#342644,.T.); +#342644 = EDGE_LOOP('',(#342645,#342646,#342652,#342653)); +#342645 = ORIENTED_EDGE('',*,*,#342623,.T.); +#342646 = ORIENTED_EDGE('',*,*,#342647,.T.); +#342647 = EDGE_CURVE('',#342615,#342415,#342648,.T.); +#342648 = LINE('',#342649,#342650); +#342649 = CARTESIAN_POINT('',(121.75,-89.4625,1.55)); +#342650 = VECTOR('',#342651,1.); +#342651 = DIRECTION('',(0.,1.,0.)); +#342652 = ORIENTED_EDGE('',*,*,#342412,.F.); +#342653 = ORIENTED_EDGE('',*,*,#342654,.F.); +#342654 = EDGE_CURVE('',#342624,#342413,#342655,.T.); +#342655 = LINE('',#342656,#342657); +#342656 = CARTESIAN_POINT('',(121.75,-89.4625,1.51)); +#342657 = VECTOR('',#342658,1.); +#342658 = DIRECTION('',(0.,1.,0.)); +#342659 = PLANE('',#342660); +#342660 = AXIS2_PLACEMENT_3D('',#342661,#342662,#342663); +#342661 = CARTESIAN_POINT('',(121.75,-89.4625,1.51)); +#342662 = DIRECTION('',(-1.,0.,0.)); +#342663 = DIRECTION('',(0.,1.,0.)); +#342664 = ADVANCED_FACE('',(#342665),#342675,.F.); +#342665 = FACE_BOUND('',#342666,.T.); +#342666 = EDGE_LOOP('',(#342667,#342668,#342669,#342670,#342671,#342672, + #342673,#342674)); +#342667 = ORIENTED_EDGE('',*,*,#342439,.T.); +#342668 = ORIENTED_EDGE('',*,*,#342471,.T.); +#342669 = ORIENTED_EDGE('',*,*,#342503,.T.); +#342670 = ORIENTED_EDGE('',*,*,#342535,.T.); +#342671 = ORIENTED_EDGE('',*,*,#342567,.T.); +#342672 = ORIENTED_EDGE('',*,*,#342599,.T.); +#342673 = ORIENTED_EDGE('',*,*,#342631,.T.); +#342674 = ORIENTED_EDGE('',*,*,#342654,.T.); +#342675 = PLANE('',#342676); +#342676 = AXIS2_PLACEMENT_3D('',#342677,#342678,#342679); +#342677 = CARTESIAN_POINT('',(0.,0.,1.51)); +#342678 = DIRECTION('',(0.,0.,1.)); +#342679 = DIRECTION('',(1.,0.,-0.)); +#342680 = ADVANCED_FACE('',(#342681),#342691,.T.); +#342681 = FACE_BOUND('',#342682,.F.); +#342682 = EDGE_LOOP('',(#342683,#342684,#342685,#342686,#342687,#342688, + #342689,#342690)); +#342683 = ORIENTED_EDGE('',*,*,#342422,.T.); +#342684 = ORIENTED_EDGE('',*,*,#342455,.T.); +#342685 = ORIENTED_EDGE('',*,*,#342486,.T.); +#342686 = ORIENTED_EDGE('',*,*,#342519,.T.); +#342687 = ORIENTED_EDGE('',*,*,#342550,.T.); +#342688 = ORIENTED_EDGE('',*,*,#342583,.T.); +#342689 = ORIENTED_EDGE('',*,*,#342614,.T.); +#342690 = ORIENTED_EDGE('',*,*,#342647,.T.); +#342691 = PLANE('',#342692); +#342692 = AXIS2_PLACEMENT_3D('',#342693,#342694,#342695); +#342693 = CARTESIAN_POINT('',(0.,0.,1.55)); +#342694 = DIRECTION('',(0.,0.,1.)); +#342695 = DIRECTION('',(1.,0.,-0.)); +#342696 = MANIFOLD_SOLID_BREP('',#342697); +#342697 = CLOSED_SHELL('',(#342698,#342740,#342771,#342804,#342835, + #342868,#342899,#342932,#342954,#342970)); +#342698 = ADVANCED_FACE('',(#342699),#342735,.T.); +#342699 = FACE_BOUND('',#342700,.T.); +#342700 = EDGE_LOOP('',(#342701,#342711,#342720,#342728)); +#342701 = ORIENTED_EDGE('',*,*,#342702,.T.); +#342702 = EDGE_CURVE('',#342703,#342705,#342707,.T.); +#342703 = VERTEX_POINT('',#342704); +#342704 = CARTESIAN_POINT('',(121.75,-91.5375,1.51)); +#342705 = VERTEX_POINT('',#342706); +#342706 = CARTESIAN_POINT('',(121.75,-91.5375,1.55)); +#342707 = LINE('',#342708,#342709); +#342708 = CARTESIAN_POINT('',(121.75,-91.5375,1.51)); +#342709 = VECTOR('',#342710,1.); +#342710 = DIRECTION('',(0.,0.,1.)); +#342711 = ORIENTED_EDGE('',*,*,#342712,.T.); +#342712 = EDGE_CURVE('',#342705,#342713,#342715,.T.); +#342713 = VERTEX_POINT('',#342714); +#342714 = CARTESIAN_POINT('',(121.9375,-91.35,1.55)); +#342715 = CIRCLE('',#342716,0.187498366229); +#342716 = AXIS2_PLACEMENT_3D('',#342717,#342718,#342719); +#342717 = CARTESIAN_POINT('',(121.93749836622,-91.53749836622,1.55)); +#342718 = DIRECTION('',(0.,0.,-1.)); +#342719 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#342720 = ORIENTED_EDGE('',*,*,#342721,.F.); +#342721 = EDGE_CURVE('',#342722,#342713,#342724,.T.); +#342722 = VERTEX_POINT('',#342723); +#342723 = CARTESIAN_POINT('',(121.9375,-91.35,1.51)); +#342724 = LINE('',#342725,#342726); +#342725 = CARTESIAN_POINT('',(121.9375,-91.35,1.51)); +#342726 = VECTOR('',#342727,1.); +#342727 = DIRECTION('',(0.,0.,1.)); +#342728 = ORIENTED_EDGE('',*,*,#342729,.F.); +#342729 = EDGE_CURVE('',#342703,#342722,#342730,.T.); +#342730 = CIRCLE('',#342731,0.187498366229); +#342731 = AXIS2_PLACEMENT_3D('',#342732,#342733,#342734); +#342732 = CARTESIAN_POINT('',(121.93749836622,-91.53749836622,1.51)); +#342733 = DIRECTION('',(0.,0.,-1.)); +#342734 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#342735 = CYLINDRICAL_SURFACE('',#342736,0.187498366229); +#342736 = AXIS2_PLACEMENT_3D('',#342737,#342738,#342739); +#342737 = CARTESIAN_POINT('',(121.93749836622,-91.53749836622,1.51)); +#342738 = DIRECTION('',(0.,0.,-1.)); +#342739 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#342740 = ADVANCED_FACE('',(#342741),#342766,.T.); +#342741 = FACE_BOUND('',#342742,.T.); +#342742 = EDGE_LOOP('',(#342743,#342744,#342752,#342760)); +#342743 = ORIENTED_EDGE('',*,*,#342721,.T.); +#342744 = ORIENTED_EDGE('',*,*,#342745,.T.); +#342745 = EDGE_CURVE('',#342713,#342746,#342748,.T.); +#342746 = VERTEX_POINT('',#342747); +#342747 = CARTESIAN_POINT('',(123.3625,-91.35,1.55)); +#342748 = LINE('',#342749,#342750); +#342749 = CARTESIAN_POINT('',(121.9375,-91.35,1.55)); +#342750 = VECTOR('',#342751,1.); +#342751 = DIRECTION('',(1.,0.,0.)); +#342752 = ORIENTED_EDGE('',*,*,#342753,.F.); +#342753 = EDGE_CURVE('',#342754,#342746,#342756,.T.); +#342754 = VERTEX_POINT('',#342755); +#342755 = CARTESIAN_POINT('',(123.3625,-91.35,1.51)); +#342756 = LINE('',#342757,#342758); +#342757 = CARTESIAN_POINT('',(123.3625,-91.35,1.51)); +#342758 = VECTOR('',#342759,1.); +#342759 = DIRECTION('',(0.,0.,1.)); +#342760 = ORIENTED_EDGE('',*,*,#342761,.F.); +#342761 = EDGE_CURVE('',#342722,#342754,#342762,.T.); +#342762 = LINE('',#342763,#342764); +#342763 = CARTESIAN_POINT('',(121.9375,-91.35,1.51)); +#342764 = VECTOR('',#342765,1.); +#342765 = DIRECTION('',(1.,0.,0.)); +#342766 = PLANE('',#342767); +#342767 = AXIS2_PLACEMENT_3D('',#342768,#342769,#342770); +#342768 = CARTESIAN_POINT('',(121.9375,-91.35,1.51)); +#342769 = DIRECTION('',(0.,1.,0.)); +#342770 = DIRECTION('',(1.,0.,0.)); +#342771 = ADVANCED_FACE('',(#342772),#342799,.T.); +#342772 = FACE_BOUND('',#342773,.T.); +#342773 = EDGE_LOOP('',(#342774,#342775,#342784,#342792)); +#342774 = ORIENTED_EDGE('',*,*,#342753,.T.); +#342775 = ORIENTED_EDGE('',*,*,#342776,.T.); +#342776 = EDGE_CURVE('',#342746,#342777,#342779,.T.); +#342777 = VERTEX_POINT('',#342778); +#342778 = CARTESIAN_POINT('',(123.55,-91.5375,1.55)); +#342779 = CIRCLE('',#342780,0.187498366229); +#342780 = AXIS2_PLACEMENT_3D('',#342781,#342782,#342783); +#342781 = CARTESIAN_POINT('',(123.36250163377,-91.53749836622,1.55)); +#342782 = DIRECTION('',(0.,0.,-1.)); +#342783 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342784 = ORIENTED_EDGE('',*,*,#342785,.F.); +#342785 = EDGE_CURVE('',#342786,#342777,#342788,.T.); +#342786 = VERTEX_POINT('',#342787); +#342787 = CARTESIAN_POINT('',(123.55,-91.5375,1.51)); +#342788 = LINE('',#342789,#342790); +#342789 = CARTESIAN_POINT('',(123.55,-91.5375,1.51)); +#342790 = VECTOR('',#342791,1.); +#342791 = DIRECTION('',(0.,0.,1.)); +#342792 = ORIENTED_EDGE('',*,*,#342793,.F.); +#342793 = EDGE_CURVE('',#342754,#342786,#342794,.T.); +#342794 = CIRCLE('',#342795,0.187498366229); +#342795 = AXIS2_PLACEMENT_3D('',#342796,#342797,#342798); +#342796 = CARTESIAN_POINT('',(123.36250163377,-91.53749836622,1.51)); +#342797 = DIRECTION('',(0.,0.,-1.)); +#342798 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342799 = CYLINDRICAL_SURFACE('',#342800,0.187498366229); +#342800 = AXIS2_PLACEMENT_3D('',#342801,#342802,#342803); +#342801 = CARTESIAN_POINT('',(123.36250163377,-91.53749836622,1.51)); +#342802 = DIRECTION('',(0.,0.,-1.)); +#342803 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#342804 = ADVANCED_FACE('',(#342805),#342830,.T.); +#342805 = FACE_BOUND('',#342806,.T.); +#342806 = EDGE_LOOP('',(#342807,#342808,#342816,#342824)); +#342807 = ORIENTED_EDGE('',*,*,#342785,.T.); +#342808 = ORIENTED_EDGE('',*,*,#342809,.T.); +#342809 = EDGE_CURVE('',#342777,#342810,#342812,.T.); +#342810 = VERTEX_POINT('',#342811); +#342811 = CARTESIAN_POINT('',(123.55,-91.9125,1.55)); +#342812 = LINE('',#342813,#342814); +#342813 = CARTESIAN_POINT('',(123.55,-91.5375,1.55)); +#342814 = VECTOR('',#342815,1.); +#342815 = DIRECTION('',(0.,-1.,0.)); +#342816 = ORIENTED_EDGE('',*,*,#342817,.F.); +#342817 = EDGE_CURVE('',#342818,#342810,#342820,.T.); +#342818 = VERTEX_POINT('',#342819); +#342819 = CARTESIAN_POINT('',(123.55,-91.9125,1.51)); +#342820 = LINE('',#342821,#342822); +#342821 = CARTESIAN_POINT('',(123.55,-91.9125,1.51)); +#342822 = VECTOR('',#342823,1.); +#342823 = DIRECTION('',(0.,0.,1.)); +#342824 = ORIENTED_EDGE('',*,*,#342825,.F.); +#342825 = EDGE_CURVE('',#342786,#342818,#342826,.T.); +#342826 = LINE('',#342827,#342828); +#342827 = CARTESIAN_POINT('',(123.55,-91.5375,1.51)); +#342828 = VECTOR('',#342829,1.); +#342829 = DIRECTION('',(0.,-1.,0.)); +#342830 = PLANE('',#342831); +#342831 = AXIS2_PLACEMENT_3D('',#342832,#342833,#342834); +#342832 = CARTESIAN_POINT('',(123.55,-91.5375,1.51)); +#342833 = DIRECTION('',(1.,0.,-0.)); +#342834 = DIRECTION('',(0.,-1.,0.)); +#342835 = ADVANCED_FACE('',(#342836),#342863,.T.); +#342836 = FACE_BOUND('',#342837,.T.); +#342837 = EDGE_LOOP('',(#342838,#342839,#342848,#342856)); +#342838 = ORIENTED_EDGE('',*,*,#342817,.T.); +#342839 = ORIENTED_EDGE('',*,*,#342840,.T.); +#342840 = EDGE_CURVE('',#342810,#342841,#342843,.T.); +#342841 = VERTEX_POINT('',#342842); +#342842 = CARTESIAN_POINT('',(123.3625,-92.1,1.55)); +#342843 = CIRCLE('',#342844,0.187498366229); +#342844 = AXIS2_PLACEMENT_3D('',#342845,#342846,#342847); +#342845 = CARTESIAN_POINT('',(123.36250163377,-91.91250163377,1.55)); +#342846 = DIRECTION('',(0.,0.,-1.)); +#342847 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#342848 = ORIENTED_EDGE('',*,*,#342849,.F.); +#342849 = EDGE_CURVE('',#342850,#342841,#342852,.T.); +#342850 = VERTEX_POINT('',#342851); +#342851 = CARTESIAN_POINT('',(123.3625,-92.1,1.51)); +#342852 = LINE('',#342853,#342854); +#342853 = CARTESIAN_POINT('',(123.3625,-92.1,1.51)); +#342854 = VECTOR('',#342855,1.); +#342855 = DIRECTION('',(0.,0.,1.)); +#342856 = ORIENTED_EDGE('',*,*,#342857,.F.); +#342857 = EDGE_CURVE('',#342818,#342850,#342858,.T.); +#342858 = CIRCLE('',#342859,0.187498366229); +#342859 = AXIS2_PLACEMENT_3D('',#342860,#342861,#342862); +#342860 = CARTESIAN_POINT('',(123.36250163377,-91.91250163377,1.51)); +#342861 = DIRECTION('',(0.,0.,-1.)); +#342862 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#342863 = CYLINDRICAL_SURFACE('',#342864,0.187498366229); +#342864 = AXIS2_PLACEMENT_3D('',#342865,#342866,#342867); +#342865 = CARTESIAN_POINT('',(123.36250163377,-91.91250163377,1.51)); +#342866 = DIRECTION('',(0.,0.,-1.)); +#342867 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#342868 = ADVANCED_FACE('',(#342869),#342894,.T.); +#342869 = FACE_BOUND('',#342870,.T.); +#342870 = EDGE_LOOP('',(#342871,#342872,#342880,#342888)); +#342871 = ORIENTED_EDGE('',*,*,#342849,.T.); +#342872 = ORIENTED_EDGE('',*,*,#342873,.T.); +#342873 = EDGE_CURVE('',#342841,#342874,#342876,.T.); +#342874 = VERTEX_POINT('',#342875); +#342875 = CARTESIAN_POINT('',(121.9375,-92.1,1.55)); +#342876 = LINE('',#342877,#342878); +#342877 = CARTESIAN_POINT('',(123.3625,-92.1,1.55)); +#342878 = VECTOR('',#342879,1.); +#342879 = DIRECTION('',(-1.,0.,0.)); +#342880 = ORIENTED_EDGE('',*,*,#342881,.F.); +#342881 = EDGE_CURVE('',#342882,#342874,#342884,.T.); +#342882 = VERTEX_POINT('',#342883); +#342883 = CARTESIAN_POINT('',(121.9375,-92.1,1.51)); +#342884 = LINE('',#342885,#342886); +#342885 = CARTESIAN_POINT('',(121.9375,-92.1,1.51)); +#342886 = VECTOR('',#342887,1.); +#342887 = DIRECTION('',(0.,0.,1.)); +#342888 = ORIENTED_EDGE('',*,*,#342889,.F.); +#342889 = EDGE_CURVE('',#342850,#342882,#342890,.T.); +#342890 = LINE('',#342891,#342892); +#342891 = CARTESIAN_POINT('',(123.3625,-92.1,1.51)); +#342892 = VECTOR('',#342893,1.); +#342893 = DIRECTION('',(-1.,0.,0.)); +#342894 = PLANE('',#342895); +#342895 = AXIS2_PLACEMENT_3D('',#342896,#342897,#342898); +#342896 = CARTESIAN_POINT('',(123.3625,-92.1,1.51)); +#342897 = DIRECTION('',(0.,-1.,0.)); +#342898 = DIRECTION('',(-1.,0.,0.)); +#342899 = ADVANCED_FACE('',(#342900),#342927,.T.); +#342900 = FACE_BOUND('',#342901,.T.); +#342901 = EDGE_LOOP('',(#342902,#342903,#342912,#342920)); +#342902 = ORIENTED_EDGE('',*,*,#342881,.T.); +#342903 = ORIENTED_EDGE('',*,*,#342904,.T.); +#342904 = EDGE_CURVE('',#342874,#342905,#342907,.T.); +#342905 = VERTEX_POINT('',#342906); +#342906 = CARTESIAN_POINT('',(121.75,-91.9125,1.55)); +#342907 = CIRCLE('',#342908,0.187498366229); +#342908 = AXIS2_PLACEMENT_3D('',#342909,#342910,#342911); +#342909 = CARTESIAN_POINT('',(121.93749836622,-91.91250163377,1.55)); +#342910 = DIRECTION('',(0.,0.,-1.)); +#342911 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#342912 = ORIENTED_EDGE('',*,*,#342913,.F.); +#342913 = EDGE_CURVE('',#342914,#342905,#342916,.T.); +#342914 = VERTEX_POINT('',#342915); +#342915 = CARTESIAN_POINT('',(121.75,-91.9125,1.51)); +#342916 = LINE('',#342917,#342918); +#342917 = CARTESIAN_POINT('',(121.75,-91.9125,1.51)); +#342918 = VECTOR('',#342919,1.); +#342919 = DIRECTION('',(0.,0.,1.)); +#342920 = ORIENTED_EDGE('',*,*,#342921,.F.); +#342921 = EDGE_CURVE('',#342882,#342914,#342922,.T.); +#342922 = CIRCLE('',#342923,0.187498366229); +#342923 = AXIS2_PLACEMENT_3D('',#342924,#342925,#342926); +#342924 = CARTESIAN_POINT('',(121.93749836622,-91.91250163377,1.51)); +#342925 = DIRECTION('',(0.,0.,-1.)); +#342926 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#342927 = CYLINDRICAL_SURFACE('',#342928,0.187498366229); +#342928 = AXIS2_PLACEMENT_3D('',#342929,#342930,#342931); +#342929 = CARTESIAN_POINT('',(121.93749836622,-91.91250163377,1.51)); +#342930 = DIRECTION('',(0.,0.,-1.)); +#342931 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#342932 = ADVANCED_FACE('',(#342933),#342949,.T.); +#342933 = FACE_BOUND('',#342934,.T.); +#342934 = EDGE_LOOP('',(#342935,#342936,#342942,#342943)); +#342935 = ORIENTED_EDGE('',*,*,#342913,.T.); +#342936 = ORIENTED_EDGE('',*,*,#342937,.T.); +#342937 = EDGE_CURVE('',#342905,#342705,#342938,.T.); +#342938 = LINE('',#342939,#342940); +#342939 = CARTESIAN_POINT('',(121.75,-91.9125,1.55)); +#342940 = VECTOR('',#342941,1.); +#342941 = DIRECTION('',(0.,1.,0.)); +#342942 = ORIENTED_EDGE('',*,*,#342702,.F.); +#342943 = ORIENTED_EDGE('',*,*,#342944,.F.); +#342944 = EDGE_CURVE('',#342914,#342703,#342945,.T.); +#342945 = LINE('',#342946,#342947); +#342946 = CARTESIAN_POINT('',(121.75,-91.9125,1.51)); +#342947 = VECTOR('',#342948,1.); +#342948 = DIRECTION('',(0.,1.,0.)); +#342949 = PLANE('',#342950); +#342950 = AXIS2_PLACEMENT_3D('',#342951,#342952,#342953); +#342951 = CARTESIAN_POINT('',(121.75,-91.9125,1.51)); +#342952 = DIRECTION('',(-1.,0.,0.)); +#342953 = DIRECTION('',(0.,1.,0.)); +#342954 = ADVANCED_FACE('',(#342955),#342965,.F.); +#342955 = FACE_BOUND('',#342956,.T.); +#342956 = EDGE_LOOP('',(#342957,#342958,#342959,#342960,#342961,#342962, + #342963,#342964)); +#342957 = ORIENTED_EDGE('',*,*,#342729,.T.); +#342958 = ORIENTED_EDGE('',*,*,#342761,.T.); +#342959 = ORIENTED_EDGE('',*,*,#342793,.T.); +#342960 = ORIENTED_EDGE('',*,*,#342825,.T.); +#342961 = ORIENTED_EDGE('',*,*,#342857,.T.); +#342962 = ORIENTED_EDGE('',*,*,#342889,.T.); +#342963 = ORIENTED_EDGE('',*,*,#342921,.T.); +#342964 = ORIENTED_EDGE('',*,*,#342944,.T.); +#342965 = PLANE('',#342966); +#342966 = AXIS2_PLACEMENT_3D('',#342967,#342968,#342969); +#342967 = CARTESIAN_POINT('',(0.,0.,1.51)); +#342968 = DIRECTION('',(0.,0.,1.)); +#342969 = DIRECTION('',(1.,0.,-0.)); +#342970 = ADVANCED_FACE('',(#342971),#342981,.T.); +#342971 = FACE_BOUND('',#342972,.F.); +#342972 = EDGE_LOOP('',(#342973,#342974,#342975,#342976,#342977,#342978, + #342979,#342980)); +#342973 = ORIENTED_EDGE('',*,*,#342712,.T.); +#342974 = ORIENTED_EDGE('',*,*,#342745,.T.); +#342975 = ORIENTED_EDGE('',*,*,#342776,.T.); +#342976 = ORIENTED_EDGE('',*,*,#342809,.T.); +#342977 = ORIENTED_EDGE('',*,*,#342840,.T.); +#342978 = ORIENTED_EDGE('',*,*,#342873,.T.); +#342979 = ORIENTED_EDGE('',*,*,#342904,.T.); +#342980 = ORIENTED_EDGE('',*,*,#342937,.T.); +#342981 = PLANE('',#342982); +#342982 = AXIS2_PLACEMENT_3D('',#342983,#342984,#342985); +#342983 = CARTESIAN_POINT('',(0.,0.,1.55)); +#342984 = DIRECTION('',(0.,0.,1.)); +#342985 = DIRECTION('',(1.,0.,-0.)); +#342986 = MANIFOLD_SOLID_BREP('',#342987); +#342987 = CLOSED_SHELL('',(#342988,#343030,#343061,#343094,#343125, + #343158,#343189,#343222,#343244,#343260)); +#342988 = ADVANCED_FACE('',(#342989),#343025,.T.); +#342989 = FACE_BOUND('',#342990,.T.); +#342990 = EDGE_LOOP('',(#342991,#343001,#343010,#343018)); +#342991 = ORIENTED_EDGE('',*,*,#342992,.T.); +#342992 = EDGE_CURVE('',#342993,#342995,#342997,.T.); +#342993 = VERTEX_POINT('',#342994); +#342994 = CARTESIAN_POINT('',(152.2,-61.9375,1.51)); +#342995 = VERTEX_POINT('',#342996); +#342996 = CARTESIAN_POINT('',(152.2,-61.9375,1.55)); +#342997 = LINE('',#342998,#342999); +#342998 = CARTESIAN_POINT('',(152.2,-61.9375,1.51)); +#342999 = VECTOR('',#343000,1.); +#343000 = DIRECTION('',(0.,0.,1.)); +#343001 = ORIENTED_EDGE('',*,*,#343002,.T.); +#343002 = EDGE_CURVE('',#342995,#343003,#343005,.T.); +#343003 = VERTEX_POINT('',#343004); +#343004 = CARTESIAN_POINT('',(152.3875,-61.75,1.55)); +#343005 = CIRCLE('',#343006,0.187498366229); +#343006 = AXIS2_PLACEMENT_3D('',#343007,#343008,#343009); +#343007 = CARTESIAN_POINT('',(152.38749836622,-61.93749836622,1.55)); +#343008 = DIRECTION('',(0.,0.,-1.)); +#343009 = DIRECTION('',(-0.999999999962,-8.713558241229E-06,-0.)); +#343010 = ORIENTED_EDGE('',*,*,#343011,.F.); +#343011 = EDGE_CURVE('',#343012,#343003,#343014,.T.); +#343012 = VERTEX_POINT('',#343013); +#343013 = CARTESIAN_POINT('',(152.3875,-61.75,1.51)); +#343014 = LINE('',#343015,#343016); +#343015 = CARTESIAN_POINT('',(152.3875,-61.75,1.51)); +#343016 = VECTOR('',#343017,1.); +#343017 = DIRECTION('',(0.,0.,1.)); +#343018 = ORIENTED_EDGE('',*,*,#343019,.F.); +#343019 = EDGE_CURVE('',#342993,#343012,#343020,.T.); +#343020 = CIRCLE('',#343021,0.187498366229); +#343021 = AXIS2_PLACEMENT_3D('',#343022,#343023,#343024); +#343022 = CARTESIAN_POINT('',(152.38749836622,-61.93749836622,1.51)); +#343023 = DIRECTION('',(0.,0.,-1.)); +#343024 = DIRECTION('',(-0.999999999962,-8.713558241229E-06,-0.)); +#343025 = CYLINDRICAL_SURFACE('',#343026,0.187498366229); +#343026 = AXIS2_PLACEMENT_3D('',#343027,#343028,#343029); +#343027 = CARTESIAN_POINT('',(152.38749836622,-61.93749836622,1.51)); +#343028 = DIRECTION('',(0.,0.,-1.)); +#343029 = DIRECTION('',(-0.999999999962,-8.713558241229E-06,-0.)); +#343030 = ADVANCED_FACE('',(#343031),#343056,.T.); +#343031 = FACE_BOUND('',#343032,.T.); +#343032 = EDGE_LOOP('',(#343033,#343034,#343042,#343050)); +#343033 = ORIENTED_EDGE('',*,*,#343011,.T.); +#343034 = ORIENTED_EDGE('',*,*,#343035,.T.); +#343035 = EDGE_CURVE('',#343003,#343036,#343038,.T.); +#343036 = VERTEX_POINT('',#343037); +#343037 = CARTESIAN_POINT('',(152.7625,-61.75,1.55)); +#343038 = LINE('',#343039,#343040); +#343039 = CARTESIAN_POINT('',(152.3875,-61.75,1.55)); +#343040 = VECTOR('',#343041,1.); +#343041 = DIRECTION('',(1.,0.,0.)); +#343042 = ORIENTED_EDGE('',*,*,#343043,.F.); +#343043 = EDGE_CURVE('',#343044,#343036,#343046,.T.); +#343044 = VERTEX_POINT('',#343045); +#343045 = CARTESIAN_POINT('',(152.7625,-61.75,1.51)); +#343046 = LINE('',#343047,#343048); +#343047 = CARTESIAN_POINT('',(152.7625,-61.75,1.51)); +#343048 = VECTOR('',#343049,1.); +#343049 = DIRECTION('',(0.,0.,1.)); +#343050 = ORIENTED_EDGE('',*,*,#343051,.F.); +#343051 = EDGE_CURVE('',#343012,#343044,#343052,.T.); +#343052 = LINE('',#343053,#343054); +#343053 = CARTESIAN_POINT('',(152.3875,-61.75,1.51)); +#343054 = VECTOR('',#343055,1.); +#343055 = DIRECTION('',(1.,0.,0.)); +#343056 = PLANE('',#343057); +#343057 = AXIS2_PLACEMENT_3D('',#343058,#343059,#343060); +#343058 = CARTESIAN_POINT('',(152.3875,-61.75,1.51)); +#343059 = DIRECTION('',(0.,1.,0.)); +#343060 = DIRECTION('',(1.,0.,0.)); +#343061 = ADVANCED_FACE('',(#343062),#343089,.T.); +#343062 = FACE_BOUND('',#343063,.T.); +#343063 = EDGE_LOOP('',(#343064,#343065,#343074,#343082)); +#343064 = ORIENTED_EDGE('',*,*,#343043,.T.); +#343065 = ORIENTED_EDGE('',*,*,#343066,.T.); +#343066 = EDGE_CURVE('',#343036,#343067,#343069,.T.); +#343067 = VERTEX_POINT('',#343068); +#343068 = CARTESIAN_POINT('',(152.95,-61.9375,1.55)); +#343069 = CIRCLE('',#343070,0.187498366229); +#343070 = AXIS2_PLACEMENT_3D('',#343071,#343072,#343073); +#343071 = CARTESIAN_POINT('',(152.76250163377,-61.93749836622,1.55)); +#343072 = DIRECTION('',(0.,0.,-1.)); +#343073 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343074 = ORIENTED_EDGE('',*,*,#343075,.F.); +#343075 = EDGE_CURVE('',#343076,#343067,#343078,.T.); +#343076 = VERTEX_POINT('',#343077); +#343077 = CARTESIAN_POINT('',(152.95,-61.9375,1.51)); +#343078 = LINE('',#343079,#343080); +#343079 = CARTESIAN_POINT('',(152.95,-61.9375,1.51)); +#343080 = VECTOR('',#343081,1.); +#343081 = DIRECTION('',(0.,0.,1.)); +#343082 = ORIENTED_EDGE('',*,*,#343083,.F.); +#343083 = EDGE_CURVE('',#343044,#343076,#343084,.T.); +#343084 = CIRCLE('',#343085,0.187498366229); +#343085 = AXIS2_PLACEMENT_3D('',#343086,#343087,#343088); +#343086 = CARTESIAN_POINT('',(152.76250163377,-61.93749836622,1.51)); +#343087 = DIRECTION('',(0.,0.,-1.)); +#343088 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343089 = CYLINDRICAL_SURFACE('',#343090,0.187498366229); +#343090 = AXIS2_PLACEMENT_3D('',#343091,#343092,#343093); +#343091 = CARTESIAN_POINT('',(152.76250163377,-61.93749836622,1.51)); +#343092 = DIRECTION('',(0.,0.,-1.)); +#343093 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343094 = ADVANCED_FACE('',(#343095),#343120,.T.); +#343095 = FACE_BOUND('',#343096,.T.); +#343096 = EDGE_LOOP('',(#343097,#343098,#343106,#343114)); +#343097 = ORIENTED_EDGE('',*,*,#343075,.T.); +#343098 = ORIENTED_EDGE('',*,*,#343099,.T.); +#343099 = EDGE_CURVE('',#343067,#343100,#343102,.T.); +#343100 = VERTEX_POINT('',#343101); +#343101 = CARTESIAN_POINT('',(152.95,-63.3625,1.55)); +#343102 = LINE('',#343103,#343104); +#343103 = CARTESIAN_POINT('',(152.95,-61.9375,1.55)); +#343104 = VECTOR('',#343105,1.); +#343105 = DIRECTION('',(0.,-1.,0.)); +#343106 = ORIENTED_EDGE('',*,*,#343107,.F.); +#343107 = EDGE_CURVE('',#343108,#343100,#343110,.T.); +#343108 = VERTEX_POINT('',#343109); +#343109 = CARTESIAN_POINT('',(152.95,-63.3625,1.51)); +#343110 = LINE('',#343111,#343112); +#343111 = CARTESIAN_POINT('',(152.95,-63.3625,1.51)); +#343112 = VECTOR('',#343113,1.); +#343113 = DIRECTION('',(0.,0.,1.)); +#343114 = ORIENTED_EDGE('',*,*,#343115,.F.); +#343115 = EDGE_CURVE('',#343076,#343108,#343116,.T.); +#343116 = LINE('',#343117,#343118); +#343117 = CARTESIAN_POINT('',(152.95,-61.9375,1.51)); +#343118 = VECTOR('',#343119,1.); +#343119 = DIRECTION('',(0.,-1.,0.)); +#343120 = PLANE('',#343121); +#343121 = AXIS2_PLACEMENT_3D('',#343122,#343123,#343124); +#343122 = CARTESIAN_POINT('',(152.95,-61.9375,1.51)); +#343123 = DIRECTION('',(1.,0.,-0.)); +#343124 = DIRECTION('',(0.,-1.,0.)); +#343125 = ADVANCED_FACE('',(#343126),#343153,.T.); +#343126 = FACE_BOUND('',#343127,.T.); +#343127 = EDGE_LOOP('',(#343128,#343129,#343138,#343146)); +#343128 = ORIENTED_EDGE('',*,*,#343107,.T.); +#343129 = ORIENTED_EDGE('',*,*,#343130,.T.); +#343130 = EDGE_CURVE('',#343100,#343131,#343133,.T.); +#343131 = VERTEX_POINT('',#343132); +#343132 = CARTESIAN_POINT('',(152.7625,-63.55,1.55)); +#343133 = CIRCLE('',#343134,0.187498366229); +#343134 = AXIS2_PLACEMENT_3D('',#343135,#343136,#343137); +#343135 = CARTESIAN_POINT('',(152.76250163377,-63.36250163377,1.55)); +#343136 = DIRECTION('',(0.,0.,-1.)); +#343137 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343138 = ORIENTED_EDGE('',*,*,#343139,.F.); +#343139 = EDGE_CURVE('',#343140,#343131,#343142,.T.); +#343140 = VERTEX_POINT('',#343141); +#343141 = CARTESIAN_POINT('',(152.7625,-63.55,1.51)); +#343142 = LINE('',#343143,#343144); +#343143 = CARTESIAN_POINT('',(152.7625,-63.55,1.51)); +#343144 = VECTOR('',#343145,1.); +#343145 = DIRECTION('',(0.,0.,1.)); +#343146 = ORIENTED_EDGE('',*,*,#343147,.F.); +#343147 = EDGE_CURVE('',#343108,#343140,#343148,.T.); +#343148 = CIRCLE('',#343149,0.187498366229); +#343149 = AXIS2_PLACEMENT_3D('',#343150,#343151,#343152); +#343150 = CARTESIAN_POINT('',(152.76250163377,-63.36250163377,1.51)); +#343151 = DIRECTION('',(0.,0.,-1.)); +#343152 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343153 = CYLINDRICAL_SURFACE('',#343154,0.187498366229); +#343154 = AXIS2_PLACEMENT_3D('',#343155,#343156,#343157); +#343155 = CARTESIAN_POINT('',(152.76250163377,-63.36250163377,1.51)); +#343156 = DIRECTION('',(0.,0.,-1.)); +#343157 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343158 = ADVANCED_FACE('',(#343159),#343184,.T.); +#343159 = FACE_BOUND('',#343160,.T.); +#343160 = EDGE_LOOP('',(#343161,#343162,#343170,#343178)); +#343161 = ORIENTED_EDGE('',*,*,#343139,.T.); +#343162 = ORIENTED_EDGE('',*,*,#343163,.T.); +#343163 = EDGE_CURVE('',#343131,#343164,#343166,.T.); +#343164 = VERTEX_POINT('',#343165); +#343165 = CARTESIAN_POINT('',(152.3875,-63.55,1.55)); +#343166 = LINE('',#343167,#343168); +#343167 = CARTESIAN_POINT('',(152.7625,-63.55,1.55)); +#343168 = VECTOR('',#343169,1.); +#343169 = DIRECTION('',(-1.,0.,0.)); +#343170 = ORIENTED_EDGE('',*,*,#343171,.F.); +#343171 = EDGE_CURVE('',#343172,#343164,#343174,.T.); +#343172 = VERTEX_POINT('',#343173); +#343173 = CARTESIAN_POINT('',(152.3875,-63.55,1.51)); +#343174 = LINE('',#343175,#343176); +#343175 = CARTESIAN_POINT('',(152.3875,-63.55,1.51)); +#343176 = VECTOR('',#343177,1.); +#343177 = DIRECTION('',(0.,0.,1.)); +#343178 = ORIENTED_EDGE('',*,*,#343179,.F.); +#343179 = EDGE_CURVE('',#343140,#343172,#343180,.T.); +#343180 = LINE('',#343181,#343182); +#343181 = CARTESIAN_POINT('',(152.7625,-63.55,1.51)); +#343182 = VECTOR('',#343183,1.); +#343183 = DIRECTION('',(-1.,0.,0.)); +#343184 = PLANE('',#343185); +#343185 = AXIS2_PLACEMENT_3D('',#343186,#343187,#343188); +#343186 = CARTESIAN_POINT('',(152.7625,-63.55,1.51)); +#343187 = DIRECTION('',(0.,-1.,0.)); +#343188 = DIRECTION('',(-1.,0.,0.)); +#343189 = ADVANCED_FACE('',(#343190),#343217,.T.); +#343190 = FACE_BOUND('',#343191,.T.); +#343191 = EDGE_LOOP('',(#343192,#343193,#343202,#343210)); +#343192 = ORIENTED_EDGE('',*,*,#343171,.T.); +#343193 = ORIENTED_EDGE('',*,*,#343194,.T.); +#343194 = EDGE_CURVE('',#343164,#343195,#343197,.T.); +#343195 = VERTEX_POINT('',#343196); +#343196 = CARTESIAN_POINT('',(152.2,-63.3625,1.55)); +#343197 = CIRCLE('',#343198,0.187498366229); +#343198 = AXIS2_PLACEMENT_3D('',#343199,#343200,#343201); +#343199 = CARTESIAN_POINT('',(152.38749836622,-63.36250163377,1.55)); +#343200 = DIRECTION('',(0.,0.,-1.)); +#343201 = DIRECTION('',(8.713558279127E-06,-0.999999999962,0.)); +#343202 = ORIENTED_EDGE('',*,*,#343203,.F.); +#343203 = EDGE_CURVE('',#343204,#343195,#343206,.T.); +#343204 = VERTEX_POINT('',#343205); +#343205 = CARTESIAN_POINT('',(152.2,-63.3625,1.51)); +#343206 = LINE('',#343207,#343208); +#343207 = CARTESIAN_POINT('',(152.2,-63.3625,1.51)); +#343208 = VECTOR('',#343209,1.); +#343209 = DIRECTION('',(0.,0.,1.)); +#343210 = ORIENTED_EDGE('',*,*,#343211,.F.); +#343211 = EDGE_CURVE('',#343172,#343204,#343212,.T.); +#343212 = CIRCLE('',#343213,0.187498366229); +#343213 = AXIS2_PLACEMENT_3D('',#343214,#343215,#343216); +#343214 = CARTESIAN_POINT('',(152.38749836622,-63.36250163377,1.51)); +#343215 = DIRECTION('',(0.,0.,-1.)); +#343216 = DIRECTION('',(8.713558279127E-06,-0.999999999962,0.)); +#343217 = CYLINDRICAL_SURFACE('',#343218,0.187498366229); +#343218 = AXIS2_PLACEMENT_3D('',#343219,#343220,#343221); +#343219 = CARTESIAN_POINT('',(152.38749836622,-63.36250163377,1.51)); +#343220 = DIRECTION('',(0.,0.,-1.)); +#343221 = DIRECTION('',(8.713558279127E-06,-0.999999999962,0.)); +#343222 = ADVANCED_FACE('',(#343223),#343239,.T.); +#343223 = FACE_BOUND('',#343224,.T.); +#343224 = EDGE_LOOP('',(#343225,#343226,#343232,#343233)); +#343225 = ORIENTED_EDGE('',*,*,#343203,.T.); +#343226 = ORIENTED_EDGE('',*,*,#343227,.T.); +#343227 = EDGE_CURVE('',#343195,#342995,#343228,.T.); +#343228 = LINE('',#343229,#343230); +#343229 = CARTESIAN_POINT('',(152.2,-63.3625,1.55)); +#343230 = VECTOR('',#343231,1.); +#343231 = DIRECTION('',(0.,1.,0.)); +#343232 = ORIENTED_EDGE('',*,*,#342992,.F.); +#343233 = ORIENTED_EDGE('',*,*,#343234,.F.); +#343234 = EDGE_CURVE('',#343204,#342993,#343235,.T.); +#343235 = LINE('',#343236,#343237); +#343236 = CARTESIAN_POINT('',(152.2,-63.3625,1.51)); +#343237 = VECTOR('',#343238,1.); +#343238 = DIRECTION('',(0.,1.,0.)); +#343239 = PLANE('',#343240); +#343240 = AXIS2_PLACEMENT_3D('',#343241,#343242,#343243); +#343241 = CARTESIAN_POINT('',(152.2,-63.3625,1.51)); +#343242 = DIRECTION('',(-1.,0.,0.)); +#343243 = DIRECTION('',(0.,1.,0.)); +#343244 = ADVANCED_FACE('',(#343245),#343255,.F.); +#343245 = FACE_BOUND('',#343246,.T.); +#343246 = EDGE_LOOP('',(#343247,#343248,#343249,#343250,#343251,#343252, + #343253,#343254)); +#343247 = ORIENTED_EDGE('',*,*,#343019,.T.); +#343248 = ORIENTED_EDGE('',*,*,#343051,.T.); +#343249 = ORIENTED_EDGE('',*,*,#343083,.T.); +#343250 = ORIENTED_EDGE('',*,*,#343115,.T.); +#343251 = ORIENTED_EDGE('',*,*,#343147,.T.); +#343252 = ORIENTED_EDGE('',*,*,#343179,.T.); +#343253 = ORIENTED_EDGE('',*,*,#343211,.T.); +#343254 = ORIENTED_EDGE('',*,*,#343234,.T.); +#343255 = PLANE('',#343256); +#343256 = AXIS2_PLACEMENT_3D('',#343257,#343258,#343259); +#343257 = CARTESIAN_POINT('',(0.,0.,1.51)); +#343258 = DIRECTION('',(0.,0.,1.)); +#343259 = DIRECTION('',(1.,0.,-0.)); +#343260 = ADVANCED_FACE('',(#343261),#343271,.T.); +#343261 = FACE_BOUND('',#343262,.F.); +#343262 = EDGE_LOOP('',(#343263,#343264,#343265,#343266,#343267,#343268, + #343269,#343270)); +#343263 = ORIENTED_EDGE('',*,*,#343002,.T.); +#343264 = ORIENTED_EDGE('',*,*,#343035,.T.); +#343265 = ORIENTED_EDGE('',*,*,#343066,.T.); +#343266 = ORIENTED_EDGE('',*,*,#343099,.T.); +#343267 = ORIENTED_EDGE('',*,*,#343130,.T.); +#343268 = ORIENTED_EDGE('',*,*,#343163,.T.); +#343269 = ORIENTED_EDGE('',*,*,#343194,.T.); +#343270 = ORIENTED_EDGE('',*,*,#343227,.T.); +#343271 = PLANE('',#343272); +#343272 = AXIS2_PLACEMENT_3D('',#343273,#343274,#343275); +#343273 = CARTESIAN_POINT('',(0.,0.,1.55)); +#343274 = DIRECTION('',(0.,0.,1.)); +#343275 = DIRECTION('',(1.,0.,-0.)); +#343276 = MANIFOLD_SOLID_BREP('',#343277); +#343277 = CLOSED_SHELL('',(#343278,#343320,#343351,#343384,#343415, + #343448,#343479,#343512,#343534,#343550)); +#343278 = ADVANCED_FACE('',(#343279),#343315,.T.); +#343279 = FACE_BOUND('',#343280,.T.); +#343280 = EDGE_LOOP('',(#343281,#343291,#343300,#343308)); +#343281 = ORIENTED_EDGE('',*,*,#343282,.T.); +#343282 = EDGE_CURVE('',#343283,#343285,#343287,.T.); +#343283 = VERTEX_POINT('',#343284); +#343284 = CARTESIAN_POINT('',(149.75,-61.9375,1.51)); +#343285 = VERTEX_POINT('',#343286); +#343286 = CARTESIAN_POINT('',(149.75,-61.9375,1.55)); +#343287 = LINE('',#343288,#343289); +#343288 = CARTESIAN_POINT('',(149.75,-61.9375,1.51)); +#343289 = VECTOR('',#343290,1.); +#343290 = DIRECTION('',(0.,0.,1.)); +#343291 = ORIENTED_EDGE('',*,*,#343292,.T.); +#343292 = EDGE_CURVE('',#343285,#343293,#343295,.T.); +#343293 = VERTEX_POINT('',#343294); +#343294 = CARTESIAN_POINT('',(149.9375,-61.75,1.55)); +#343295 = CIRCLE('',#343296,0.187498366229); +#343296 = AXIS2_PLACEMENT_3D('',#343297,#343298,#343299); +#343297 = CARTESIAN_POINT('',(149.93749836622,-61.93749836622,1.55)); +#343298 = DIRECTION('',(0.,0.,-1.)); +#343299 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#343300 = ORIENTED_EDGE('',*,*,#343301,.F.); +#343301 = EDGE_CURVE('',#343302,#343293,#343304,.T.); +#343302 = VERTEX_POINT('',#343303); +#343303 = CARTESIAN_POINT('',(149.9375,-61.75,1.51)); +#343304 = LINE('',#343305,#343306); +#343305 = CARTESIAN_POINT('',(149.9375,-61.75,1.51)); +#343306 = VECTOR('',#343307,1.); +#343307 = DIRECTION('',(0.,0.,1.)); +#343308 = ORIENTED_EDGE('',*,*,#343309,.F.); +#343309 = EDGE_CURVE('',#343283,#343302,#343310,.T.); +#343310 = CIRCLE('',#343311,0.187498366229); +#343311 = AXIS2_PLACEMENT_3D('',#343312,#343313,#343314); +#343312 = CARTESIAN_POINT('',(149.93749836622,-61.93749836622,1.51)); +#343313 = DIRECTION('',(0.,0.,-1.)); +#343314 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#343315 = CYLINDRICAL_SURFACE('',#343316,0.187498366229); +#343316 = AXIS2_PLACEMENT_3D('',#343317,#343318,#343319); +#343317 = CARTESIAN_POINT('',(149.93749836622,-61.93749836622,1.51)); +#343318 = DIRECTION('',(0.,0.,-1.)); +#343319 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#343320 = ADVANCED_FACE('',(#343321),#343346,.T.); +#343321 = FACE_BOUND('',#343322,.T.); +#343322 = EDGE_LOOP('',(#343323,#343324,#343332,#343340)); +#343323 = ORIENTED_EDGE('',*,*,#343301,.T.); +#343324 = ORIENTED_EDGE('',*,*,#343325,.T.); +#343325 = EDGE_CURVE('',#343293,#343326,#343328,.T.); +#343326 = VERTEX_POINT('',#343327); +#343327 = CARTESIAN_POINT('',(150.3125,-61.75,1.55)); +#343328 = LINE('',#343329,#343330); +#343329 = CARTESIAN_POINT('',(149.9375,-61.75,1.55)); +#343330 = VECTOR('',#343331,1.); +#343331 = DIRECTION('',(1.,0.,0.)); +#343332 = ORIENTED_EDGE('',*,*,#343333,.F.); +#343333 = EDGE_CURVE('',#343334,#343326,#343336,.T.); +#343334 = VERTEX_POINT('',#343335); +#343335 = CARTESIAN_POINT('',(150.3125,-61.75,1.51)); +#343336 = LINE('',#343337,#343338); +#343337 = CARTESIAN_POINT('',(150.3125,-61.75,1.51)); +#343338 = VECTOR('',#343339,1.); +#343339 = DIRECTION('',(0.,0.,1.)); +#343340 = ORIENTED_EDGE('',*,*,#343341,.F.); +#343341 = EDGE_CURVE('',#343302,#343334,#343342,.T.); +#343342 = LINE('',#343343,#343344); +#343343 = CARTESIAN_POINT('',(149.9375,-61.75,1.51)); +#343344 = VECTOR('',#343345,1.); +#343345 = DIRECTION('',(1.,0.,0.)); +#343346 = PLANE('',#343347); +#343347 = AXIS2_PLACEMENT_3D('',#343348,#343349,#343350); +#343348 = CARTESIAN_POINT('',(149.9375,-61.75,1.51)); +#343349 = DIRECTION('',(0.,1.,0.)); +#343350 = DIRECTION('',(1.,0.,0.)); +#343351 = ADVANCED_FACE('',(#343352),#343379,.T.); +#343352 = FACE_BOUND('',#343353,.T.); +#343353 = EDGE_LOOP('',(#343354,#343355,#343364,#343372)); +#343354 = ORIENTED_EDGE('',*,*,#343333,.T.); +#343355 = ORIENTED_EDGE('',*,*,#343356,.T.); +#343356 = EDGE_CURVE('',#343326,#343357,#343359,.T.); +#343357 = VERTEX_POINT('',#343358); +#343358 = CARTESIAN_POINT('',(150.5,-61.9375,1.55)); +#343359 = CIRCLE('',#343360,0.187498366229); +#343360 = AXIS2_PLACEMENT_3D('',#343361,#343362,#343363); +#343361 = CARTESIAN_POINT('',(150.31250163377,-61.93749836622,1.55)); +#343362 = DIRECTION('',(0.,0.,-1.)); +#343363 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343364 = ORIENTED_EDGE('',*,*,#343365,.F.); +#343365 = EDGE_CURVE('',#343366,#343357,#343368,.T.); +#343366 = VERTEX_POINT('',#343367); +#343367 = CARTESIAN_POINT('',(150.5,-61.9375,1.51)); +#343368 = LINE('',#343369,#343370); +#343369 = CARTESIAN_POINT('',(150.5,-61.9375,1.51)); +#343370 = VECTOR('',#343371,1.); +#343371 = DIRECTION('',(0.,0.,1.)); +#343372 = ORIENTED_EDGE('',*,*,#343373,.F.); +#343373 = EDGE_CURVE('',#343334,#343366,#343374,.T.); +#343374 = CIRCLE('',#343375,0.187498366229); +#343375 = AXIS2_PLACEMENT_3D('',#343376,#343377,#343378); +#343376 = CARTESIAN_POINT('',(150.31250163377,-61.93749836622,1.51)); +#343377 = DIRECTION('',(0.,0.,-1.)); +#343378 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343379 = CYLINDRICAL_SURFACE('',#343380,0.187498366229); +#343380 = AXIS2_PLACEMENT_3D('',#343381,#343382,#343383); +#343381 = CARTESIAN_POINT('',(150.31250163377,-61.93749836622,1.51)); +#343382 = DIRECTION('',(0.,0.,-1.)); +#343383 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#343384 = ADVANCED_FACE('',(#343385),#343410,.T.); +#343385 = FACE_BOUND('',#343386,.T.); +#343386 = EDGE_LOOP('',(#343387,#343388,#343396,#343404)); +#343387 = ORIENTED_EDGE('',*,*,#343365,.T.); +#343388 = ORIENTED_EDGE('',*,*,#343389,.T.); +#343389 = EDGE_CURVE('',#343357,#343390,#343392,.T.); +#343390 = VERTEX_POINT('',#343391); +#343391 = CARTESIAN_POINT('',(150.5,-63.3625,1.55)); +#343392 = LINE('',#343393,#343394); +#343393 = CARTESIAN_POINT('',(150.5,-61.9375,1.55)); +#343394 = VECTOR('',#343395,1.); +#343395 = DIRECTION('',(0.,-1.,0.)); +#343396 = ORIENTED_EDGE('',*,*,#343397,.F.); +#343397 = EDGE_CURVE('',#343398,#343390,#343400,.T.); +#343398 = VERTEX_POINT('',#343399); +#343399 = CARTESIAN_POINT('',(150.5,-63.3625,1.51)); +#343400 = LINE('',#343401,#343402); +#343401 = CARTESIAN_POINT('',(150.5,-63.3625,1.51)); +#343402 = VECTOR('',#343403,1.); +#343403 = DIRECTION('',(0.,0.,1.)); +#343404 = ORIENTED_EDGE('',*,*,#343405,.F.); +#343405 = EDGE_CURVE('',#343366,#343398,#343406,.T.); +#343406 = LINE('',#343407,#343408); +#343407 = CARTESIAN_POINT('',(150.5,-61.9375,1.51)); +#343408 = VECTOR('',#343409,1.); +#343409 = DIRECTION('',(0.,-1.,0.)); +#343410 = PLANE('',#343411); +#343411 = AXIS2_PLACEMENT_3D('',#343412,#343413,#343414); +#343412 = CARTESIAN_POINT('',(150.5,-61.9375,1.51)); +#343413 = DIRECTION('',(1.,0.,-0.)); +#343414 = DIRECTION('',(0.,-1.,0.)); +#343415 = ADVANCED_FACE('',(#343416),#343443,.T.); +#343416 = FACE_BOUND('',#343417,.T.); +#343417 = EDGE_LOOP('',(#343418,#343419,#343428,#343436)); +#343418 = ORIENTED_EDGE('',*,*,#343397,.T.); +#343419 = ORIENTED_EDGE('',*,*,#343420,.T.); +#343420 = EDGE_CURVE('',#343390,#343421,#343423,.T.); +#343421 = VERTEX_POINT('',#343422); +#343422 = CARTESIAN_POINT('',(150.3125,-63.55,1.55)); +#343423 = CIRCLE('',#343424,0.187498366229); +#343424 = AXIS2_PLACEMENT_3D('',#343425,#343426,#343427); +#343425 = CARTESIAN_POINT('',(150.31250163377,-63.36250163377,1.55)); +#343426 = DIRECTION('',(0.,0.,-1.)); +#343427 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343428 = ORIENTED_EDGE('',*,*,#343429,.F.); +#343429 = EDGE_CURVE('',#343430,#343421,#343432,.T.); +#343430 = VERTEX_POINT('',#343431); +#343431 = CARTESIAN_POINT('',(150.3125,-63.55,1.51)); +#343432 = LINE('',#343433,#343434); +#343433 = CARTESIAN_POINT('',(150.3125,-63.55,1.51)); +#343434 = VECTOR('',#343435,1.); +#343435 = DIRECTION('',(0.,0.,1.)); +#343436 = ORIENTED_EDGE('',*,*,#343437,.F.); +#343437 = EDGE_CURVE('',#343398,#343430,#343438,.T.); +#343438 = CIRCLE('',#343439,0.187498366229); +#343439 = AXIS2_PLACEMENT_3D('',#343440,#343441,#343442); +#343440 = CARTESIAN_POINT('',(150.31250163377,-63.36250163377,1.51)); +#343441 = DIRECTION('',(0.,0.,-1.)); +#343442 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343443 = CYLINDRICAL_SURFACE('',#343444,0.187498366229); +#343444 = AXIS2_PLACEMENT_3D('',#343445,#343446,#343447); +#343445 = CARTESIAN_POINT('',(150.31250163377,-63.36250163377,1.51)); +#343446 = DIRECTION('',(0.,0.,-1.)); +#343447 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#343448 = ADVANCED_FACE('',(#343449),#343474,.T.); +#343449 = FACE_BOUND('',#343450,.T.); +#343450 = EDGE_LOOP('',(#343451,#343452,#343460,#343468)); +#343451 = ORIENTED_EDGE('',*,*,#343429,.T.); +#343452 = ORIENTED_EDGE('',*,*,#343453,.T.); +#343453 = EDGE_CURVE('',#343421,#343454,#343456,.T.); +#343454 = VERTEX_POINT('',#343455); +#343455 = CARTESIAN_POINT('',(149.9375,-63.55,1.55)); +#343456 = LINE('',#343457,#343458); +#343457 = CARTESIAN_POINT('',(150.3125,-63.55,1.55)); +#343458 = VECTOR('',#343459,1.); +#343459 = DIRECTION('',(-1.,0.,0.)); +#343460 = ORIENTED_EDGE('',*,*,#343461,.F.); +#343461 = EDGE_CURVE('',#343462,#343454,#343464,.T.); +#343462 = VERTEX_POINT('',#343463); +#343463 = CARTESIAN_POINT('',(149.9375,-63.55,1.51)); +#343464 = LINE('',#343465,#343466); +#343465 = CARTESIAN_POINT('',(149.9375,-63.55,1.51)); +#343466 = VECTOR('',#343467,1.); +#343467 = DIRECTION('',(0.,0.,1.)); +#343468 = ORIENTED_EDGE('',*,*,#343469,.F.); +#343469 = EDGE_CURVE('',#343430,#343462,#343470,.T.); +#343470 = LINE('',#343471,#343472); +#343471 = CARTESIAN_POINT('',(150.3125,-63.55,1.51)); +#343472 = VECTOR('',#343473,1.); +#343473 = DIRECTION('',(-1.,0.,0.)); +#343474 = PLANE('',#343475); +#343475 = AXIS2_PLACEMENT_3D('',#343476,#343477,#343478); +#343476 = CARTESIAN_POINT('',(150.3125,-63.55,1.51)); +#343477 = DIRECTION('',(0.,-1.,0.)); +#343478 = DIRECTION('',(-1.,0.,0.)); +#343479 = ADVANCED_FACE('',(#343480),#343507,.T.); +#343480 = FACE_BOUND('',#343481,.T.); +#343481 = EDGE_LOOP('',(#343482,#343483,#343492,#343500)); +#343482 = ORIENTED_EDGE('',*,*,#343461,.T.); +#343483 = ORIENTED_EDGE('',*,*,#343484,.T.); +#343484 = EDGE_CURVE('',#343454,#343485,#343487,.T.); +#343485 = VERTEX_POINT('',#343486); +#343486 = CARTESIAN_POINT('',(149.75,-63.3625,1.55)); +#343487 = CIRCLE('',#343488,0.187498366229); +#343488 = AXIS2_PLACEMENT_3D('',#343489,#343490,#343491); +#343489 = CARTESIAN_POINT('',(149.93749836622,-63.36250163377,1.55)); +#343490 = DIRECTION('',(0.,0.,-1.)); +#343491 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#343492 = ORIENTED_EDGE('',*,*,#343493,.F.); +#343493 = EDGE_CURVE('',#343494,#343485,#343496,.T.); +#343494 = VERTEX_POINT('',#343495); +#343495 = CARTESIAN_POINT('',(149.75,-63.3625,1.51)); +#343496 = LINE('',#343497,#343498); +#343497 = CARTESIAN_POINT('',(149.75,-63.3625,1.51)); +#343498 = VECTOR('',#343499,1.); +#343499 = DIRECTION('',(0.,0.,1.)); +#343500 = ORIENTED_EDGE('',*,*,#343501,.F.); +#343501 = EDGE_CURVE('',#343462,#343494,#343502,.T.); +#343502 = CIRCLE('',#343503,0.187498366229); +#343503 = AXIS2_PLACEMENT_3D('',#343504,#343505,#343506); +#343504 = CARTESIAN_POINT('',(149.93749836622,-63.36250163377,1.51)); +#343505 = DIRECTION('',(0.,0.,-1.)); +#343506 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#343507 = CYLINDRICAL_SURFACE('',#343508,0.187498366229); +#343508 = AXIS2_PLACEMENT_3D('',#343509,#343510,#343511); +#343509 = CARTESIAN_POINT('',(149.93749836622,-63.36250163377,1.51)); +#343510 = DIRECTION('',(0.,0.,-1.)); +#343511 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#343512 = ADVANCED_FACE('',(#343513),#343529,.T.); +#343513 = FACE_BOUND('',#343514,.T.); +#343514 = EDGE_LOOP('',(#343515,#343516,#343522,#343523)); +#343515 = ORIENTED_EDGE('',*,*,#343493,.T.); +#343516 = ORIENTED_EDGE('',*,*,#343517,.T.); +#343517 = EDGE_CURVE('',#343485,#343285,#343518,.T.); +#343518 = LINE('',#343519,#343520); +#343519 = CARTESIAN_POINT('',(149.75,-63.3625,1.55)); +#343520 = VECTOR('',#343521,1.); +#343521 = DIRECTION('',(0.,1.,0.)); +#343522 = ORIENTED_EDGE('',*,*,#343282,.F.); +#343523 = ORIENTED_EDGE('',*,*,#343524,.F.); +#343524 = EDGE_CURVE('',#343494,#343283,#343525,.T.); +#343525 = LINE('',#343526,#343527); +#343526 = CARTESIAN_POINT('',(149.75,-63.3625,1.51)); +#343527 = VECTOR('',#343528,1.); +#343528 = DIRECTION('',(0.,1.,0.)); +#343529 = PLANE('',#343530); +#343530 = AXIS2_PLACEMENT_3D('',#343531,#343532,#343533); +#343531 = CARTESIAN_POINT('',(149.75,-63.3625,1.51)); +#343532 = DIRECTION('',(-1.,0.,0.)); +#343533 = DIRECTION('',(0.,1.,0.)); +#343534 = ADVANCED_FACE('',(#343535),#343545,.F.); +#343535 = FACE_BOUND('',#343536,.T.); +#343536 = EDGE_LOOP('',(#343537,#343538,#343539,#343540,#343541,#343542, + #343543,#343544)); +#343537 = ORIENTED_EDGE('',*,*,#343309,.T.); +#343538 = ORIENTED_EDGE('',*,*,#343341,.T.); +#343539 = ORIENTED_EDGE('',*,*,#343373,.T.); +#343540 = ORIENTED_EDGE('',*,*,#343405,.T.); +#343541 = ORIENTED_EDGE('',*,*,#343437,.T.); +#343542 = ORIENTED_EDGE('',*,*,#343469,.T.); +#343543 = ORIENTED_EDGE('',*,*,#343501,.T.); +#343544 = ORIENTED_EDGE('',*,*,#343524,.T.); +#343545 = PLANE('',#343546); +#343546 = AXIS2_PLACEMENT_3D('',#343547,#343548,#343549); +#343547 = CARTESIAN_POINT('',(0.,0.,1.51)); +#343548 = DIRECTION('',(0.,0.,1.)); +#343549 = DIRECTION('',(1.,0.,-0.)); +#343550 = ADVANCED_FACE('',(#343551),#343561,.T.); +#343551 = FACE_BOUND('',#343552,.F.); +#343552 = EDGE_LOOP('',(#343553,#343554,#343555,#343556,#343557,#343558, + #343559,#343560)); +#343553 = ORIENTED_EDGE('',*,*,#343292,.T.); +#343554 = ORIENTED_EDGE('',*,*,#343325,.T.); +#343555 = ORIENTED_EDGE('',*,*,#343356,.T.); +#343556 = ORIENTED_EDGE('',*,*,#343389,.T.); +#343557 = ORIENTED_EDGE('',*,*,#343420,.T.); +#343558 = ORIENTED_EDGE('',*,*,#343453,.T.); +#343559 = ORIENTED_EDGE('',*,*,#343484,.T.); +#343560 = ORIENTED_EDGE('',*,*,#343517,.T.); +#343561 = PLANE('',#343562); +#343562 = AXIS2_PLACEMENT_3D('',#343563,#343564,#343565); +#343563 = CARTESIAN_POINT('',(0.,0.,1.55)); +#343564 = DIRECTION('',(0.,0.,1.)); +#343565 = DIRECTION('',(1.,0.,-0.)); +#343566 = MANIFOLD_SOLID_BREP('',#343567); +#343567 = CLOSED_SHELL('',(#343568,#343610,#343641,#343674,#343705, + #343738,#343769,#343802,#343824,#343840)); +#343568 = ADVANCED_FACE('',(#343569),#343605,.T.); +#343569 = FACE_BOUND('',#343570,.T.); +#343570 = EDGE_LOOP('',(#343571,#343581,#343590,#343598)); +#343571 = ORIENTED_EDGE('',*,*,#343572,.T.); +#343572 = EDGE_CURVE('',#343573,#343575,#343577,.T.); +#343573 = VERTEX_POINT('',#343574); +#343574 = CARTESIAN_POINT('',(124.5,-61.9375,1.51)); +#343575 = VERTEX_POINT('',#343576); +#343576 = CARTESIAN_POINT('',(124.5,-61.9375,1.55)); +#343577 = LINE('',#343578,#343579); +#343578 = CARTESIAN_POINT('',(124.5,-61.9375,1.51)); +#343579 = VECTOR('',#343580,1.); +#343580 = DIRECTION('',(0.,0.,1.)); +#343581 = ORIENTED_EDGE('',*,*,#343582,.T.); +#343582 = EDGE_CURVE('',#343575,#343583,#343585,.T.); +#343583 = VERTEX_POINT('',#343584); +#343584 = CARTESIAN_POINT('',(124.6875,-61.75,1.55)); +#343585 = CIRCLE('',#343586,0.187498366229); +#343586 = AXIS2_PLACEMENT_3D('',#343587,#343588,#343589); +#343587 = CARTESIAN_POINT('',(124.68749836622,-61.93749836622,1.55)); +#343588 = DIRECTION('',(0.,0.,-1.)); +#343589 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343590 = ORIENTED_EDGE('',*,*,#343591,.F.); +#343591 = EDGE_CURVE('',#343592,#343583,#343594,.T.); +#343592 = VERTEX_POINT('',#343593); +#343593 = CARTESIAN_POINT('',(124.6875,-61.75,1.51)); +#343594 = LINE('',#343595,#343596); +#343595 = CARTESIAN_POINT('',(124.6875,-61.75,1.51)); +#343596 = VECTOR('',#343597,1.); +#343597 = DIRECTION('',(0.,0.,1.)); +#343598 = ORIENTED_EDGE('',*,*,#343599,.F.); +#343599 = EDGE_CURVE('',#343573,#343592,#343600,.T.); +#343600 = CIRCLE('',#343601,0.187498366229); +#343601 = AXIS2_PLACEMENT_3D('',#343602,#343603,#343604); +#343602 = CARTESIAN_POINT('',(124.68749836622,-61.93749836622,1.51)); +#343603 = DIRECTION('',(0.,0.,-1.)); +#343604 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343605 = CYLINDRICAL_SURFACE('',#343606,0.187498366229); +#343606 = AXIS2_PLACEMENT_3D('',#343607,#343608,#343609); +#343607 = CARTESIAN_POINT('',(124.68749836622,-61.93749836622,1.51)); +#343608 = DIRECTION('',(0.,0.,-1.)); +#343609 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343610 = ADVANCED_FACE('',(#343611),#343636,.T.); +#343611 = FACE_BOUND('',#343612,.T.); +#343612 = EDGE_LOOP('',(#343613,#343614,#343622,#343630)); +#343613 = ORIENTED_EDGE('',*,*,#343591,.T.); +#343614 = ORIENTED_EDGE('',*,*,#343615,.T.); +#343615 = EDGE_CURVE('',#343583,#343616,#343618,.T.); +#343616 = VERTEX_POINT('',#343617); +#343617 = CARTESIAN_POINT('',(125.0625,-61.75,1.55)); +#343618 = LINE('',#343619,#343620); +#343619 = CARTESIAN_POINT('',(124.6875,-61.75,1.55)); +#343620 = VECTOR('',#343621,1.); +#343621 = DIRECTION('',(1.,0.,0.)); +#343622 = ORIENTED_EDGE('',*,*,#343623,.F.); +#343623 = EDGE_CURVE('',#343624,#343616,#343626,.T.); +#343624 = VERTEX_POINT('',#343625); +#343625 = CARTESIAN_POINT('',(125.0625,-61.75,1.51)); +#343626 = LINE('',#343627,#343628); +#343627 = CARTESIAN_POINT('',(125.0625,-61.75,1.51)); +#343628 = VECTOR('',#343629,1.); +#343629 = DIRECTION('',(0.,0.,1.)); +#343630 = ORIENTED_EDGE('',*,*,#343631,.F.); +#343631 = EDGE_CURVE('',#343592,#343624,#343632,.T.); +#343632 = LINE('',#343633,#343634); +#343633 = CARTESIAN_POINT('',(124.6875,-61.75,1.51)); +#343634 = VECTOR('',#343635,1.); +#343635 = DIRECTION('',(1.,0.,0.)); +#343636 = PLANE('',#343637); +#343637 = AXIS2_PLACEMENT_3D('',#343638,#343639,#343640); +#343638 = CARTESIAN_POINT('',(124.6875,-61.75,1.51)); +#343639 = DIRECTION('',(0.,1.,0.)); +#343640 = DIRECTION('',(1.,0.,0.)); +#343641 = ADVANCED_FACE('',(#343642),#343669,.T.); +#343642 = FACE_BOUND('',#343643,.T.); +#343643 = EDGE_LOOP('',(#343644,#343645,#343654,#343662)); +#343644 = ORIENTED_EDGE('',*,*,#343623,.T.); +#343645 = ORIENTED_EDGE('',*,*,#343646,.T.); +#343646 = EDGE_CURVE('',#343616,#343647,#343649,.T.); +#343647 = VERTEX_POINT('',#343648); +#343648 = CARTESIAN_POINT('',(125.25,-61.9375,1.55)); +#343649 = CIRCLE('',#343650,0.187498366229); +#343650 = AXIS2_PLACEMENT_3D('',#343651,#343652,#343653); +#343651 = CARTESIAN_POINT('',(125.06250163377,-61.93749836622,1.55)); +#343652 = DIRECTION('',(0.,0.,-1.)); +#343653 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#343654 = ORIENTED_EDGE('',*,*,#343655,.F.); +#343655 = EDGE_CURVE('',#343656,#343647,#343658,.T.); +#343656 = VERTEX_POINT('',#343657); +#343657 = CARTESIAN_POINT('',(125.25,-61.9375,1.51)); +#343658 = LINE('',#343659,#343660); +#343659 = CARTESIAN_POINT('',(125.25,-61.9375,1.51)); +#343660 = VECTOR('',#343661,1.); +#343661 = DIRECTION('',(0.,0.,1.)); +#343662 = ORIENTED_EDGE('',*,*,#343663,.F.); +#343663 = EDGE_CURVE('',#343624,#343656,#343664,.T.); +#343664 = CIRCLE('',#343665,0.187498366229); +#343665 = AXIS2_PLACEMENT_3D('',#343666,#343667,#343668); +#343666 = CARTESIAN_POINT('',(125.06250163377,-61.93749836622,1.51)); +#343667 = DIRECTION('',(0.,0.,-1.)); +#343668 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#343669 = CYLINDRICAL_SURFACE('',#343670,0.187498366229); +#343670 = AXIS2_PLACEMENT_3D('',#343671,#343672,#343673); +#343671 = CARTESIAN_POINT('',(125.06250163377,-61.93749836622,1.51)); +#343672 = DIRECTION('',(0.,0.,-1.)); +#343673 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#343674 = ADVANCED_FACE('',(#343675),#343700,.T.); +#343675 = FACE_BOUND('',#343676,.T.); +#343676 = EDGE_LOOP('',(#343677,#343678,#343686,#343694)); +#343677 = ORIENTED_EDGE('',*,*,#343655,.T.); +#343678 = ORIENTED_EDGE('',*,*,#343679,.T.); +#343679 = EDGE_CURVE('',#343647,#343680,#343682,.T.); +#343680 = VERTEX_POINT('',#343681); +#343681 = CARTESIAN_POINT('',(125.25,-63.3625,1.55)); +#343682 = LINE('',#343683,#343684); +#343683 = CARTESIAN_POINT('',(125.25,-61.9375,1.55)); +#343684 = VECTOR('',#343685,1.); +#343685 = DIRECTION('',(0.,-1.,0.)); +#343686 = ORIENTED_EDGE('',*,*,#343687,.F.); +#343687 = EDGE_CURVE('',#343688,#343680,#343690,.T.); +#343688 = VERTEX_POINT('',#343689); +#343689 = CARTESIAN_POINT('',(125.25,-63.3625,1.51)); +#343690 = LINE('',#343691,#343692); +#343691 = CARTESIAN_POINT('',(125.25,-63.3625,1.51)); +#343692 = VECTOR('',#343693,1.); +#343693 = DIRECTION('',(0.,0.,1.)); +#343694 = ORIENTED_EDGE('',*,*,#343695,.F.); +#343695 = EDGE_CURVE('',#343656,#343688,#343696,.T.); +#343696 = LINE('',#343697,#343698); +#343697 = CARTESIAN_POINT('',(125.25,-61.9375,1.51)); +#343698 = VECTOR('',#343699,1.); +#343699 = DIRECTION('',(0.,-1.,0.)); +#343700 = PLANE('',#343701); +#343701 = AXIS2_PLACEMENT_3D('',#343702,#343703,#343704); +#343702 = CARTESIAN_POINT('',(125.25,-61.9375,1.51)); +#343703 = DIRECTION('',(1.,0.,-0.)); +#343704 = DIRECTION('',(0.,-1.,0.)); +#343705 = ADVANCED_FACE('',(#343706),#343733,.T.); +#343706 = FACE_BOUND('',#343707,.T.); +#343707 = EDGE_LOOP('',(#343708,#343709,#343718,#343726)); +#343708 = ORIENTED_EDGE('',*,*,#343687,.T.); +#343709 = ORIENTED_EDGE('',*,*,#343710,.T.); +#343710 = EDGE_CURVE('',#343680,#343711,#343713,.T.); +#343711 = VERTEX_POINT('',#343712); +#343712 = CARTESIAN_POINT('',(125.0625,-63.55,1.55)); +#343713 = CIRCLE('',#343714,0.187498366229); +#343714 = AXIS2_PLACEMENT_3D('',#343715,#343716,#343717); +#343715 = CARTESIAN_POINT('',(125.06250163377,-63.36250163377,1.55)); +#343716 = DIRECTION('',(0.,0.,-1.)); +#343717 = DIRECTION('',(0.999999999962,8.713558468608E-06,0.)); +#343718 = ORIENTED_EDGE('',*,*,#343719,.F.); +#343719 = EDGE_CURVE('',#343720,#343711,#343722,.T.); +#343720 = VERTEX_POINT('',#343721); +#343721 = CARTESIAN_POINT('',(125.0625,-63.55,1.51)); +#343722 = LINE('',#343723,#343724); +#343723 = CARTESIAN_POINT('',(125.0625,-63.55,1.51)); +#343724 = VECTOR('',#343725,1.); +#343725 = DIRECTION('',(0.,0.,1.)); +#343726 = ORIENTED_EDGE('',*,*,#343727,.F.); +#343727 = EDGE_CURVE('',#343688,#343720,#343728,.T.); +#343728 = CIRCLE('',#343729,0.187498366229); +#343729 = AXIS2_PLACEMENT_3D('',#343730,#343731,#343732); +#343730 = CARTESIAN_POINT('',(125.06250163377,-63.36250163377,1.51)); +#343731 = DIRECTION('',(0.,0.,-1.)); +#343732 = DIRECTION('',(0.999999999962,8.713558468608E-06,0.)); +#343733 = CYLINDRICAL_SURFACE('',#343734,0.187498366229); +#343734 = AXIS2_PLACEMENT_3D('',#343735,#343736,#343737); +#343735 = CARTESIAN_POINT('',(125.06250163377,-63.36250163377,1.51)); +#343736 = DIRECTION('',(0.,0.,-1.)); +#343737 = DIRECTION('',(0.999999999962,8.713558468608E-06,0.)); +#343738 = ADVANCED_FACE('',(#343739),#343764,.T.); +#343739 = FACE_BOUND('',#343740,.T.); +#343740 = EDGE_LOOP('',(#343741,#343742,#343750,#343758)); +#343741 = ORIENTED_EDGE('',*,*,#343719,.T.); +#343742 = ORIENTED_EDGE('',*,*,#343743,.T.); +#343743 = EDGE_CURVE('',#343711,#343744,#343746,.T.); +#343744 = VERTEX_POINT('',#343745); +#343745 = CARTESIAN_POINT('',(124.6875,-63.55,1.55)); +#343746 = LINE('',#343747,#343748); +#343747 = CARTESIAN_POINT('',(125.0625,-63.55,1.55)); +#343748 = VECTOR('',#343749,1.); +#343749 = DIRECTION('',(-1.,0.,0.)); +#343750 = ORIENTED_EDGE('',*,*,#343751,.F.); +#343751 = EDGE_CURVE('',#343752,#343744,#343754,.T.); +#343752 = VERTEX_POINT('',#343753); +#343753 = CARTESIAN_POINT('',(124.6875,-63.55,1.51)); +#343754 = LINE('',#343755,#343756); +#343755 = CARTESIAN_POINT('',(124.6875,-63.55,1.51)); +#343756 = VECTOR('',#343757,1.); +#343757 = DIRECTION('',(0.,0.,1.)); +#343758 = ORIENTED_EDGE('',*,*,#343759,.F.); +#343759 = EDGE_CURVE('',#343720,#343752,#343760,.T.); +#343760 = LINE('',#343761,#343762); +#343761 = CARTESIAN_POINT('',(125.0625,-63.55,1.51)); +#343762 = VECTOR('',#343763,1.); +#343763 = DIRECTION('',(-1.,0.,0.)); +#343764 = PLANE('',#343765); +#343765 = AXIS2_PLACEMENT_3D('',#343766,#343767,#343768); +#343766 = CARTESIAN_POINT('',(125.0625,-63.55,1.51)); +#343767 = DIRECTION('',(0.,-1.,0.)); +#343768 = DIRECTION('',(-1.,0.,0.)); +#343769 = ADVANCED_FACE('',(#343770),#343797,.T.); +#343770 = FACE_BOUND('',#343771,.T.); +#343771 = EDGE_LOOP('',(#343772,#343773,#343782,#343790)); +#343772 = ORIENTED_EDGE('',*,*,#343751,.T.); +#343773 = ORIENTED_EDGE('',*,*,#343774,.T.); +#343774 = EDGE_CURVE('',#343744,#343775,#343777,.T.); +#343775 = VERTEX_POINT('',#343776); +#343776 = CARTESIAN_POINT('',(124.5,-63.3625,1.55)); +#343777 = CIRCLE('',#343778,0.187498366229); +#343778 = AXIS2_PLACEMENT_3D('',#343779,#343780,#343781); +#343779 = CARTESIAN_POINT('',(124.68749836622,-63.36250163377,1.55)); +#343780 = DIRECTION('',(0.,0.,-1.)); +#343781 = DIRECTION('',(8.713558506503E-06,-0.999999999962,0.)); +#343782 = ORIENTED_EDGE('',*,*,#343783,.F.); +#343783 = EDGE_CURVE('',#343784,#343775,#343786,.T.); +#343784 = VERTEX_POINT('',#343785); +#343785 = CARTESIAN_POINT('',(124.5,-63.3625,1.51)); +#343786 = LINE('',#343787,#343788); +#343787 = CARTESIAN_POINT('',(124.5,-63.3625,1.51)); +#343788 = VECTOR('',#343789,1.); +#343789 = DIRECTION('',(0.,0.,1.)); +#343790 = ORIENTED_EDGE('',*,*,#343791,.F.); +#343791 = EDGE_CURVE('',#343752,#343784,#343792,.T.); +#343792 = CIRCLE('',#343793,0.187498366229); +#343793 = AXIS2_PLACEMENT_3D('',#343794,#343795,#343796); +#343794 = CARTESIAN_POINT('',(124.68749836622,-63.36250163377,1.51)); +#343795 = DIRECTION('',(0.,0.,-1.)); +#343796 = DIRECTION('',(8.713558506503E-06,-0.999999999962,0.)); +#343797 = CYLINDRICAL_SURFACE('',#343798,0.187498366229); +#343798 = AXIS2_PLACEMENT_3D('',#343799,#343800,#343801); +#343799 = CARTESIAN_POINT('',(124.68749836622,-63.36250163377,1.51)); +#343800 = DIRECTION('',(0.,0.,-1.)); +#343801 = DIRECTION('',(8.713558506503E-06,-0.999999999962,0.)); +#343802 = ADVANCED_FACE('',(#343803),#343819,.T.); +#343803 = FACE_BOUND('',#343804,.T.); +#343804 = EDGE_LOOP('',(#343805,#343806,#343812,#343813)); +#343805 = ORIENTED_EDGE('',*,*,#343783,.T.); +#343806 = ORIENTED_EDGE('',*,*,#343807,.T.); +#343807 = EDGE_CURVE('',#343775,#343575,#343808,.T.); +#343808 = LINE('',#343809,#343810); +#343809 = CARTESIAN_POINT('',(124.5,-63.3625,1.55)); +#343810 = VECTOR('',#343811,1.); +#343811 = DIRECTION('',(0.,1.,0.)); +#343812 = ORIENTED_EDGE('',*,*,#343572,.F.); +#343813 = ORIENTED_EDGE('',*,*,#343814,.F.); +#343814 = EDGE_CURVE('',#343784,#343573,#343815,.T.); +#343815 = LINE('',#343816,#343817); +#343816 = CARTESIAN_POINT('',(124.5,-63.3625,1.51)); +#343817 = VECTOR('',#343818,1.); +#343818 = DIRECTION('',(0.,1.,0.)); +#343819 = PLANE('',#343820); +#343820 = AXIS2_PLACEMENT_3D('',#343821,#343822,#343823); +#343821 = CARTESIAN_POINT('',(124.5,-63.3625,1.51)); +#343822 = DIRECTION('',(-1.,0.,0.)); +#343823 = DIRECTION('',(0.,1.,0.)); +#343824 = ADVANCED_FACE('',(#343825),#343835,.F.); +#343825 = FACE_BOUND('',#343826,.T.); +#343826 = EDGE_LOOP('',(#343827,#343828,#343829,#343830,#343831,#343832, + #343833,#343834)); +#343827 = ORIENTED_EDGE('',*,*,#343599,.T.); +#343828 = ORIENTED_EDGE('',*,*,#343631,.T.); +#343829 = ORIENTED_EDGE('',*,*,#343663,.T.); +#343830 = ORIENTED_EDGE('',*,*,#343695,.T.); +#343831 = ORIENTED_EDGE('',*,*,#343727,.T.); +#343832 = ORIENTED_EDGE('',*,*,#343759,.T.); +#343833 = ORIENTED_EDGE('',*,*,#343791,.T.); +#343834 = ORIENTED_EDGE('',*,*,#343814,.T.); +#343835 = PLANE('',#343836); +#343836 = AXIS2_PLACEMENT_3D('',#343837,#343838,#343839); +#343837 = CARTESIAN_POINT('',(0.,0.,1.51)); +#343838 = DIRECTION('',(0.,0.,1.)); +#343839 = DIRECTION('',(1.,0.,-0.)); +#343840 = ADVANCED_FACE('',(#343841),#343851,.T.); +#343841 = FACE_BOUND('',#343842,.F.); +#343842 = EDGE_LOOP('',(#343843,#343844,#343845,#343846,#343847,#343848, + #343849,#343850)); +#343843 = ORIENTED_EDGE('',*,*,#343582,.T.); +#343844 = ORIENTED_EDGE('',*,*,#343615,.T.); +#343845 = ORIENTED_EDGE('',*,*,#343646,.T.); +#343846 = ORIENTED_EDGE('',*,*,#343679,.T.); +#343847 = ORIENTED_EDGE('',*,*,#343710,.T.); +#343848 = ORIENTED_EDGE('',*,*,#343743,.T.); +#343849 = ORIENTED_EDGE('',*,*,#343774,.T.); +#343850 = ORIENTED_EDGE('',*,*,#343807,.T.); +#343851 = PLANE('',#343852); +#343852 = AXIS2_PLACEMENT_3D('',#343853,#343854,#343855); +#343853 = CARTESIAN_POINT('',(0.,0.,1.55)); +#343854 = DIRECTION('',(0.,0.,1.)); +#343855 = DIRECTION('',(1.,0.,-0.)); +#343856 = MANIFOLD_SOLID_BREP('',#343857); +#343857 = CLOSED_SHELL('',(#343858,#343900,#343931,#343964,#343995, + #344028,#344059,#344092,#344114,#344130)); +#343858 = ADVANCED_FACE('',(#343859),#343895,.T.); +#343859 = FACE_BOUND('',#343860,.T.); +#343860 = EDGE_LOOP('',(#343861,#343871,#343880,#343888)); +#343861 = ORIENTED_EDGE('',*,*,#343862,.T.); +#343862 = EDGE_CURVE('',#343863,#343865,#343867,.T.); +#343863 = VERTEX_POINT('',#343864); +#343864 = CARTESIAN_POINT('',(122.05,-61.9375,1.51)); +#343865 = VERTEX_POINT('',#343866); +#343866 = CARTESIAN_POINT('',(122.05,-61.9375,1.55)); +#343867 = LINE('',#343868,#343869); +#343868 = CARTESIAN_POINT('',(122.05,-61.9375,1.51)); +#343869 = VECTOR('',#343870,1.); +#343870 = DIRECTION('',(0.,0.,1.)); +#343871 = ORIENTED_EDGE('',*,*,#343872,.T.); +#343872 = EDGE_CURVE('',#343865,#343873,#343875,.T.); +#343873 = VERTEX_POINT('',#343874); +#343874 = CARTESIAN_POINT('',(122.2375,-61.75,1.55)); +#343875 = CIRCLE('',#343876,0.187498366229); +#343876 = AXIS2_PLACEMENT_3D('',#343877,#343878,#343879); +#343877 = CARTESIAN_POINT('',(122.23749836622,-61.93749836622,1.55)); +#343878 = DIRECTION('',(0.,0.,-1.)); +#343879 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343880 = ORIENTED_EDGE('',*,*,#343881,.F.); +#343881 = EDGE_CURVE('',#343882,#343873,#343884,.T.); +#343882 = VERTEX_POINT('',#343883); +#343883 = CARTESIAN_POINT('',(122.2375,-61.75,1.51)); +#343884 = LINE('',#343885,#343886); +#343885 = CARTESIAN_POINT('',(122.2375,-61.75,1.51)); +#343886 = VECTOR('',#343887,1.); +#343887 = DIRECTION('',(0.,0.,1.)); +#343888 = ORIENTED_EDGE('',*,*,#343889,.F.); +#343889 = EDGE_CURVE('',#343863,#343882,#343890,.T.); +#343890 = CIRCLE('',#343891,0.187498366229); +#343891 = AXIS2_PLACEMENT_3D('',#343892,#343893,#343894); +#343892 = CARTESIAN_POINT('',(122.23749836622,-61.93749836622,1.51)); +#343893 = DIRECTION('',(0.,0.,-1.)); +#343894 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343895 = CYLINDRICAL_SURFACE('',#343896,0.187498366229); +#343896 = AXIS2_PLACEMENT_3D('',#343897,#343898,#343899); +#343897 = CARTESIAN_POINT('',(122.23749836622,-61.93749836622,1.51)); +#343898 = DIRECTION('',(0.,0.,-1.)); +#343899 = DIRECTION('',(-0.999999999962,-8.713558392815E-06,-0.)); +#343900 = ADVANCED_FACE('',(#343901),#343926,.T.); +#343901 = FACE_BOUND('',#343902,.T.); +#343902 = EDGE_LOOP('',(#343903,#343904,#343912,#343920)); +#343903 = ORIENTED_EDGE('',*,*,#343881,.T.); +#343904 = ORIENTED_EDGE('',*,*,#343905,.T.); +#343905 = EDGE_CURVE('',#343873,#343906,#343908,.T.); +#343906 = VERTEX_POINT('',#343907); +#343907 = CARTESIAN_POINT('',(122.6125,-61.75,1.55)); +#343908 = LINE('',#343909,#343910); +#343909 = CARTESIAN_POINT('',(122.2375,-61.75,1.55)); +#343910 = VECTOR('',#343911,1.); +#343911 = DIRECTION('',(1.,0.,0.)); +#343912 = ORIENTED_EDGE('',*,*,#343913,.F.); +#343913 = EDGE_CURVE('',#343914,#343906,#343916,.T.); +#343914 = VERTEX_POINT('',#343915); +#343915 = CARTESIAN_POINT('',(122.6125,-61.75,1.51)); +#343916 = LINE('',#343917,#343918); +#343917 = CARTESIAN_POINT('',(122.6125,-61.75,1.51)); +#343918 = VECTOR('',#343919,1.); +#343919 = DIRECTION('',(0.,0.,1.)); +#343920 = ORIENTED_EDGE('',*,*,#343921,.F.); +#343921 = EDGE_CURVE('',#343882,#343914,#343922,.T.); +#343922 = LINE('',#343923,#343924); +#343923 = CARTESIAN_POINT('',(122.2375,-61.75,1.51)); +#343924 = VECTOR('',#343925,1.); +#343925 = DIRECTION('',(1.,0.,0.)); +#343926 = PLANE('',#343927); +#343927 = AXIS2_PLACEMENT_3D('',#343928,#343929,#343930); +#343928 = CARTESIAN_POINT('',(122.2375,-61.75,1.51)); +#343929 = DIRECTION('',(0.,1.,0.)); +#343930 = DIRECTION('',(1.,0.,0.)); +#343931 = ADVANCED_FACE('',(#343932),#343959,.T.); +#343932 = FACE_BOUND('',#343933,.T.); +#343933 = EDGE_LOOP('',(#343934,#343935,#343944,#343952)); +#343934 = ORIENTED_EDGE('',*,*,#343913,.T.); +#343935 = ORIENTED_EDGE('',*,*,#343936,.T.); +#343936 = EDGE_CURVE('',#343906,#343937,#343939,.T.); +#343937 = VERTEX_POINT('',#343938); +#343938 = CARTESIAN_POINT('',(122.8,-61.9375,1.55)); +#343939 = CIRCLE('',#343940,0.187498366229); +#343940 = AXIS2_PLACEMENT_3D('',#343941,#343942,#343943); +#343941 = CARTESIAN_POINT('',(122.61250163377,-61.93749836622,1.55)); +#343942 = DIRECTION('',(0.,0.,-1.)); +#343943 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#343944 = ORIENTED_EDGE('',*,*,#343945,.F.); +#343945 = EDGE_CURVE('',#343946,#343937,#343948,.T.); +#343946 = VERTEX_POINT('',#343947); +#343947 = CARTESIAN_POINT('',(122.8,-61.9375,1.51)); +#343948 = LINE('',#343949,#343950); +#343949 = CARTESIAN_POINT('',(122.8,-61.9375,1.51)); +#343950 = VECTOR('',#343951,1.); +#343951 = DIRECTION('',(0.,0.,1.)); +#343952 = ORIENTED_EDGE('',*,*,#343953,.F.); +#343953 = EDGE_CURVE('',#343914,#343946,#343954,.T.); +#343954 = CIRCLE('',#343955,0.187498366229); +#343955 = AXIS2_PLACEMENT_3D('',#343956,#343957,#343958); +#343956 = CARTESIAN_POINT('',(122.61250163377,-61.93749836622,1.51)); +#343957 = DIRECTION('',(0.,0.,-1.)); +#343958 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#343959 = CYLINDRICAL_SURFACE('',#343960,0.187498366229); +#343960 = AXIS2_PLACEMENT_3D('',#343961,#343962,#343963); +#343961 = CARTESIAN_POINT('',(122.61250163377,-61.93749836622,1.51)); +#343962 = DIRECTION('',(0.,0.,-1.)); +#343963 = DIRECTION('',(-8.713558354919E-06,0.999999999962,0.)); +#343964 = ADVANCED_FACE('',(#343965),#343990,.T.); +#343965 = FACE_BOUND('',#343966,.T.); +#343966 = EDGE_LOOP('',(#343967,#343968,#343976,#343984)); +#343967 = ORIENTED_EDGE('',*,*,#343945,.T.); +#343968 = ORIENTED_EDGE('',*,*,#343969,.T.); +#343969 = EDGE_CURVE('',#343937,#343970,#343972,.T.); +#343970 = VERTEX_POINT('',#343971); +#343971 = CARTESIAN_POINT('',(122.8,-63.3625,1.55)); +#343972 = LINE('',#343973,#343974); +#343973 = CARTESIAN_POINT('',(122.8,-61.9375,1.55)); +#343974 = VECTOR('',#343975,1.); +#343975 = DIRECTION('',(0.,-1.,0.)); +#343976 = ORIENTED_EDGE('',*,*,#343977,.F.); +#343977 = EDGE_CURVE('',#343978,#343970,#343980,.T.); +#343978 = VERTEX_POINT('',#343979); +#343979 = CARTESIAN_POINT('',(122.8,-63.3625,1.51)); +#343980 = LINE('',#343981,#343982); +#343981 = CARTESIAN_POINT('',(122.8,-63.3625,1.51)); +#343982 = VECTOR('',#343983,1.); +#343983 = DIRECTION('',(0.,0.,1.)); +#343984 = ORIENTED_EDGE('',*,*,#343985,.F.); +#343985 = EDGE_CURVE('',#343946,#343978,#343986,.T.); +#343986 = LINE('',#343987,#343988); +#343987 = CARTESIAN_POINT('',(122.8,-61.9375,1.51)); +#343988 = VECTOR('',#343989,1.); +#343989 = DIRECTION('',(0.,-1.,0.)); +#343990 = PLANE('',#343991); +#343991 = AXIS2_PLACEMENT_3D('',#343992,#343993,#343994); +#343992 = CARTESIAN_POINT('',(122.8,-61.9375,1.51)); +#343993 = DIRECTION('',(1.,0.,-0.)); +#343994 = DIRECTION('',(0.,-1.,0.)); +#343995 = ADVANCED_FACE('',(#343996),#344023,.T.); +#343996 = FACE_BOUND('',#343997,.T.); +#343997 = EDGE_LOOP('',(#343998,#343999,#344008,#344016)); +#343998 = ORIENTED_EDGE('',*,*,#343977,.T.); +#343999 = ORIENTED_EDGE('',*,*,#344000,.T.); +#344000 = EDGE_CURVE('',#343970,#344001,#344003,.T.); +#344001 = VERTEX_POINT('',#344002); +#344002 = CARTESIAN_POINT('',(122.6125,-63.55,1.55)); +#344003 = CIRCLE('',#344004,0.187498366229); +#344004 = AXIS2_PLACEMENT_3D('',#344005,#344006,#344007); +#344005 = CARTESIAN_POINT('',(122.61250163377,-63.36250163377,1.55)); +#344006 = DIRECTION('',(0.,0.,-1.)); +#344007 = DIRECTION('',(0.999999999962,8.713558468607E-06,0.)); +#344008 = ORIENTED_EDGE('',*,*,#344009,.F.); +#344009 = EDGE_CURVE('',#344010,#344001,#344012,.T.); +#344010 = VERTEX_POINT('',#344011); +#344011 = CARTESIAN_POINT('',(122.6125,-63.55,1.51)); +#344012 = LINE('',#344013,#344014); +#344013 = CARTESIAN_POINT('',(122.6125,-63.55,1.51)); +#344014 = VECTOR('',#344015,1.); +#344015 = DIRECTION('',(0.,0.,1.)); +#344016 = ORIENTED_EDGE('',*,*,#344017,.F.); +#344017 = EDGE_CURVE('',#343978,#344010,#344018,.T.); +#344018 = CIRCLE('',#344019,0.187498366229); +#344019 = AXIS2_PLACEMENT_3D('',#344020,#344021,#344022); +#344020 = CARTESIAN_POINT('',(122.61250163377,-63.36250163377,1.51)); +#344021 = DIRECTION('',(0.,0.,-1.)); +#344022 = DIRECTION('',(0.999999999962,8.713558468607E-06,0.)); +#344023 = CYLINDRICAL_SURFACE('',#344024,0.187498366229); +#344024 = AXIS2_PLACEMENT_3D('',#344025,#344026,#344027); +#344025 = CARTESIAN_POINT('',(122.61250163377,-63.36250163377,1.51)); +#344026 = DIRECTION('',(0.,0.,-1.)); +#344027 = DIRECTION('',(0.999999999962,8.713558468607E-06,0.)); +#344028 = ADVANCED_FACE('',(#344029),#344054,.T.); +#344029 = FACE_BOUND('',#344030,.T.); +#344030 = EDGE_LOOP('',(#344031,#344032,#344040,#344048)); +#344031 = ORIENTED_EDGE('',*,*,#344009,.T.); +#344032 = ORIENTED_EDGE('',*,*,#344033,.T.); +#344033 = EDGE_CURVE('',#344001,#344034,#344036,.T.); +#344034 = VERTEX_POINT('',#344035); +#344035 = CARTESIAN_POINT('',(122.2375,-63.55,1.55)); +#344036 = LINE('',#344037,#344038); +#344037 = CARTESIAN_POINT('',(122.6125,-63.55,1.55)); +#344038 = VECTOR('',#344039,1.); +#344039 = DIRECTION('',(-1.,0.,0.)); +#344040 = ORIENTED_EDGE('',*,*,#344041,.F.); +#344041 = EDGE_CURVE('',#344042,#344034,#344044,.T.); +#344042 = VERTEX_POINT('',#344043); +#344043 = CARTESIAN_POINT('',(122.2375,-63.55,1.51)); +#344044 = LINE('',#344045,#344046); +#344045 = CARTESIAN_POINT('',(122.2375,-63.55,1.51)); +#344046 = VECTOR('',#344047,1.); +#344047 = DIRECTION('',(0.,0.,1.)); +#344048 = ORIENTED_EDGE('',*,*,#344049,.F.); +#344049 = EDGE_CURVE('',#344010,#344042,#344050,.T.); +#344050 = LINE('',#344051,#344052); +#344051 = CARTESIAN_POINT('',(122.6125,-63.55,1.51)); +#344052 = VECTOR('',#344053,1.); +#344053 = DIRECTION('',(-1.,0.,0.)); +#344054 = PLANE('',#344055); +#344055 = AXIS2_PLACEMENT_3D('',#344056,#344057,#344058); +#344056 = CARTESIAN_POINT('',(122.6125,-63.55,1.51)); +#344057 = DIRECTION('',(0.,-1.,0.)); +#344058 = DIRECTION('',(-1.,0.,0.)); +#344059 = ADVANCED_FACE('',(#344060),#344087,.T.); +#344060 = FACE_BOUND('',#344061,.T.); +#344061 = EDGE_LOOP('',(#344062,#344063,#344072,#344080)); +#344062 = ORIENTED_EDGE('',*,*,#344041,.T.); +#344063 = ORIENTED_EDGE('',*,*,#344064,.T.); +#344064 = EDGE_CURVE('',#344034,#344065,#344067,.T.); +#344065 = VERTEX_POINT('',#344066); +#344066 = CARTESIAN_POINT('',(122.05,-63.3625,1.55)); +#344067 = CIRCLE('',#344068,0.187498366229); +#344068 = AXIS2_PLACEMENT_3D('',#344069,#344070,#344071); +#344069 = CARTESIAN_POINT('',(122.23749836622,-63.36250163377,1.55)); +#344070 = DIRECTION('',(0.,0.,-1.)); +#344071 = DIRECTION('',(8.713558430712E-06,-0.999999999962,0.)); +#344072 = ORIENTED_EDGE('',*,*,#344073,.F.); +#344073 = EDGE_CURVE('',#344074,#344065,#344076,.T.); +#344074 = VERTEX_POINT('',#344075); +#344075 = CARTESIAN_POINT('',(122.05,-63.3625,1.51)); +#344076 = LINE('',#344077,#344078); +#344077 = CARTESIAN_POINT('',(122.05,-63.3625,1.51)); +#344078 = VECTOR('',#344079,1.); +#344079 = DIRECTION('',(0.,0.,1.)); +#344080 = ORIENTED_EDGE('',*,*,#344081,.F.); +#344081 = EDGE_CURVE('',#344042,#344074,#344082,.T.); +#344082 = CIRCLE('',#344083,0.187498366229); +#344083 = AXIS2_PLACEMENT_3D('',#344084,#344085,#344086); +#344084 = CARTESIAN_POINT('',(122.23749836622,-63.36250163377,1.51)); +#344085 = DIRECTION('',(0.,0.,-1.)); +#344086 = DIRECTION('',(8.713558430712E-06,-0.999999999962,0.)); +#344087 = CYLINDRICAL_SURFACE('',#344088,0.187498366229); +#344088 = AXIS2_PLACEMENT_3D('',#344089,#344090,#344091); +#344089 = CARTESIAN_POINT('',(122.23749836622,-63.36250163377,1.51)); +#344090 = DIRECTION('',(0.,0.,-1.)); +#344091 = DIRECTION('',(8.713558430712E-06,-0.999999999962,0.)); +#344092 = ADVANCED_FACE('',(#344093),#344109,.T.); +#344093 = FACE_BOUND('',#344094,.T.); +#344094 = EDGE_LOOP('',(#344095,#344096,#344102,#344103)); +#344095 = ORIENTED_EDGE('',*,*,#344073,.T.); +#344096 = ORIENTED_EDGE('',*,*,#344097,.T.); +#344097 = EDGE_CURVE('',#344065,#343865,#344098,.T.); +#344098 = LINE('',#344099,#344100); +#344099 = CARTESIAN_POINT('',(122.05,-63.3625,1.55)); +#344100 = VECTOR('',#344101,1.); +#344101 = DIRECTION('',(0.,1.,0.)); +#344102 = ORIENTED_EDGE('',*,*,#343862,.F.); +#344103 = ORIENTED_EDGE('',*,*,#344104,.F.); +#344104 = EDGE_CURVE('',#344074,#343863,#344105,.T.); +#344105 = LINE('',#344106,#344107); +#344106 = CARTESIAN_POINT('',(122.05,-63.3625,1.51)); +#344107 = VECTOR('',#344108,1.); +#344108 = DIRECTION('',(0.,1.,0.)); +#344109 = PLANE('',#344110); +#344110 = AXIS2_PLACEMENT_3D('',#344111,#344112,#344113); +#344111 = CARTESIAN_POINT('',(122.05,-63.3625,1.51)); +#344112 = DIRECTION('',(-1.,0.,0.)); +#344113 = DIRECTION('',(0.,1.,0.)); +#344114 = ADVANCED_FACE('',(#344115),#344125,.F.); +#344115 = FACE_BOUND('',#344116,.T.); +#344116 = EDGE_LOOP('',(#344117,#344118,#344119,#344120,#344121,#344122, + #344123,#344124)); +#344117 = ORIENTED_EDGE('',*,*,#343889,.T.); +#344118 = ORIENTED_EDGE('',*,*,#343921,.T.); +#344119 = ORIENTED_EDGE('',*,*,#343953,.T.); +#344120 = ORIENTED_EDGE('',*,*,#343985,.T.); +#344121 = ORIENTED_EDGE('',*,*,#344017,.T.); +#344122 = ORIENTED_EDGE('',*,*,#344049,.T.); +#344123 = ORIENTED_EDGE('',*,*,#344081,.T.); +#344124 = ORIENTED_EDGE('',*,*,#344104,.T.); +#344125 = PLANE('',#344126); +#344126 = AXIS2_PLACEMENT_3D('',#344127,#344128,#344129); +#344127 = CARTESIAN_POINT('',(0.,0.,1.51)); +#344128 = DIRECTION('',(0.,0.,1.)); +#344129 = DIRECTION('',(1.,0.,-0.)); +#344130 = ADVANCED_FACE('',(#344131),#344141,.T.); +#344131 = FACE_BOUND('',#344132,.F.); +#344132 = EDGE_LOOP('',(#344133,#344134,#344135,#344136,#344137,#344138, + #344139,#344140)); +#344133 = ORIENTED_EDGE('',*,*,#343872,.T.); +#344134 = ORIENTED_EDGE('',*,*,#343905,.T.); +#344135 = ORIENTED_EDGE('',*,*,#343936,.T.); +#344136 = ORIENTED_EDGE('',*,*,#343969,.T.); +#344137 = ORIENTED_EDGE('',*,*,#344000,.T.); +#344138 = ORIENTED_EDGE('',*,*,#344033,.T.); +#344139 = ORIENTED_EDGE('',*,*,#344064,.T.); +#344140 = ORIENTED_EDGE('',*,*,#344097,.T.); +#344141 = PLANE('',#344142); +#344142 = AXIS2_PLACEMENT_3D('',#344143,#344144,#344145); +#344143 = CARTESIAN_POINT('',(0.,0.,1.55)); +#344144 = DIRECTION('',(0.,0.,1.)); +#344145 = DIRECTION('',(1.,0.,-0.)); +#344146 = MANIFOLD_SOLID_BREP('',#344147); +#344147 = CLOSED_SHELL('',(#344148,#344188,#344219,#344250,#344272, + #344284)); +#344148 = ADVANCED_FACE('',(#344149),#344183,.T.); +#344149 = FACE_BOUND('',#344150,.T.); +#344150 = EDGE_LOOP('',(#344151,#344161,#344169,#344177)); +#344151 = ORIENTED_EDGE('',*,*,#344152,.T.); +#344152 = EDGE_CURVE('',#344153,#344155,#344157,.T.); +#344153 = VERTEX_POINT('',#344154); +#344154 = CARTESIAN_POINT('',(128.5,-77.8,1.51)); +#344155 = VERTEX_POINT('',#344156); +#344156 = CARTESIAN_POINT('',(128.5,-77.8,1.55)); +#344157 = LINE('',#344158,#344159); +#344158 = CARTESIAN_POINT('',(128.5,-77.8,1.51)); +#344159 = VECTOR('',#344160,1.); +#344160 = DIRECTION('',(0.,0.,1.)); +#344161 = ORIENTED_EDGE('',*,*,#344162,.T.); +#344162 = EDGE_CURVE('',#344155,#344163,#344165,.T.); +#344163 = VERTEX_POINT('',#344164); +#344164 = CARTESIAN_POINT('',(128.5,-76.9,1.55)); +#344165 = LINE('',#344166,#344167); +#344166 = CARTESIAN_POINT('',(128.5,-77.8,1.55)); +#344167 = VECTOR('',#344168,1.); +#344168 = DIRECTION('',(0.,1.,0.)); +#344169 = ORIENTED_EDGE('',*,*,#344170,.F.); +#344170 = EDGE_CURVE('',#344171,#344163,#344173,.T.); +#344171 = VERTEX_POINT('',#344172); +#344172 = CARTESIAN_POINT('',(128.5,-76.9,1.51)); +#344173 = LINE('',#344174,#344175); +#344174 = CARTESIAN_POINT('',(128.5,-76.9,1.51)); +#344175 = VECTOR('',#344176,1.); +#344176 = DIRECTION('',(0.,0.,1.)); +#344177 = ORIENTED_EDGE('',*,*,#344178,.F.); +#344178 = EDGE_CURVE('',#344153,#344171,#344179,.T.); +#344179 = LINE('',#344180,#344181); +#344180 = CARTESIAN_POINT('',(128.5,-77.8,1.51)); +#344181 = VECTOR('',#344182,1.); +#344182 = DIRECTION('',(0.,1.,0.)); +#344183 = PLANE('',#344184); +#344184 = AXIS2_PLACEMENT_3D('',#344185,#344186,#344187); +#344185 = CARTESIAN_POINT('',(128.5,-77.8,1.51)); +#344186 = DIRECTION('',(-1.,0.,0.)); +#344187 = DIRECTION('',(0.,1.,0.)); +#344188 = ADVANCED_FACE('',(#344189),#344214,.T.); +#344189 = FACE_BOUND('',#344190,.T.); +#344190 = EDGE_LOOP('',(#344191,#344192,#344200,#344208)); +#344191 = ORIENTED_EDGE('',*,*,#344170,.T.); +#344192 = ORIENTED_EDGE('',*,*,#344193,.T.); +#344193 = EDGE_CURVE('',#344163,#344194,#344196,.T.); +#344194 = VERTEX_POINT('',#344195); +#344195 = CARTESIAN_POINT('',(130.,-76.9,1.55)); +#344196 = LINE('',#344197,#344198); +#344197 = CARTESIAN_POINT('',(128.5,-76.9,1.55)); +#344198 = VECTOR('',#344199,1.); +#344199 = DIRECTION('',(1.,0.,0.)); +#344200 = ORIENTED_EDGE('',*,*,#344201,.F.); +#344201 = EDGE_CURVE('',#344202,#344194,#344204,.T.); +#344202 = VERTEX_POINT('',#344203); +#344203 = CARTESIAN_POINT('',(130.,-76.9,1.51)); +#344204 = LINE('',#344205,#344206); +#344205 = CARTESIAN_POINT('',(130.,-76.9,1.51)); +#344206 = VECTOR('',#344207,1.); +#344207 = DIRECTION('',(0.,0.,1.)); +#344208 = ORIENTED_EDGE('',*,*,#344209,.F.); +#344209 = EDGE_CURVE('',#344171,#344202,#344210,.T.); +#344210 = LINE('',#344211,#344212); +#344211 = CARTESIAN_POINT('',(128.5,-76.9,1.51)); +#344212 = VECTOR('',#344213,1.); +#344213 = DIRECTION('',(1.,0.,0.)); +#344214 = PLANE('',#344215); +#344215 = AXIS2_PLACEMENT_3D('',#344216,#344217,#344218); +#344216 = CARTESIAN_POINT('',(128.5,-76.9,1.51)); +#344217 = DIRECTION('',(0.,1.,0.)); +#344218 = DIRECTION('',(1.,0.,0.)); +#344219 = ADVANCED_FACE('',(#344220),#344245,.T.); +#344220 = FACE_BOUND('',#344221,.T.); +#344221 = EDGE_LOOP('',(#344222,#344223,#344231,#344239)); +#344222 = ORIENTED_EDGE('',*,*,#344201,.T.); +#344223 = ORIENTED_EDGE('',*,*,#344224,.T.); +#344224 = EDGE_CURVE('',#344194,#344225,#344227,.T.); +#344225 = VERTEX_POINT('',#344226); +#344226 = CARTESIAN_POINT('',(130.,-77.8,1.55)); +#344227 = LINE('',#344228,#344229); +#344228 = CARTESIAN_POINT('',(130.,-76.9,1.55)); +#344229 = VECTOR('',#344230,1.); +#344230 = DIRECTION('',(0.,-1.,0.)); +#344231 = ORIENTED_EDGE('',*,*,#344232,.F.); +#344232 = EDGE_CURVE('',#344233,#344225,#344235,.T.); +#344233 = VERTEX_POINT('',#344234); +#344234 = CARTESIAN_POINT('',(130.,-77.8,1.51)); +#344235 = LINE('',#344236,#344237); +#344236 = CARTESIAN_POINT('',(130.,-77.8,1.51)); +#344237 = VECTOR('',#344238,1.); +#344238 = DIRECTION('',(0.,0.,1.)); +#344239 = ORIENTED_EDGE('',*,*,#344240,.F.); +#344240 = EDGE_CURVE('',#344202,#344233,#344241,.T.); +#344241 = LINE('',#344242,#344243); +#344242 = CARTESIAN_POINT('',(130.,-76.9,1.51)); +#344243 = VECTOR('',#344244,1.); +#344244 = DIRECTION('',(0.,-1.,0.)); +#344245 = PLANE('',#344246); +#344246 = AXIS2_PLACEMENT_3D('',#344247,#344248,#344249); +#344247 = CARTESIAN_POINT('',(130.,-76.9,1.51)); +#344248 = DIRECTION('',(1.,0.,-0.)); +#344249 = DIRECTION('',(0.,-1.,0.)); +#344250 = ADVANCED_FACE('',(#344251),#344267,.T.); +#344251 = FACE_BOUND('',#344252,.T.); +#344252 = EDGE_LOOP('',(#344253,#344254,#344260,#344261)); +#344253 = ORIENTED_EDGE('',*,*,#344232,.T.); +#344254 = ORIENTED_EDGE('',*,*,#344255,.T.); +#344255 = EDGE_CURVE('',#344225,#344155,#344256,.T.); +#344256 = LINE('',#344257,#344258); +#344257 = CARTESIAN_POINT('',(130.,-77.8,1.55)); +#344258 = VECTOR('',#344259,1.); +#344259 = DIRECTION('',(-1.,0.,0.)); +#344260 = ORIENTED_EDGE('',*,*,#344152,.F.); +#344261 = ORIENTED_EDGE('',*,*,#344262,.F.); +#344262 = EDGE_CURVE('',#344233,#344153,#344263,.T.); +#344263 = LINE('',#344264,#344265); +#344264 = CARTESIAN_POINT('',(130.,-77.8,1.51)); +#344265 = VECTOR('',#344266,1.); +#344266 = DIRECTION('',(-1.,0.,0.)); +#344267 = PLANE('',#344268); +#344268 = AXIS2_PLACEMENT_3D('',#344269,#344270,#344271); +#344269 = CARTESIAN_POINT('',(130.,-77.8,1.51)); +#344270 = DIRECTION('',(0.,-1.,0.)); +#344271 = DIRECTION('',(-1.,0.,0.)); +#344272 = ADVANCED_FACE('',(#344273),#344279,.F.); +#344273 = FACE_BOUND('',#344274,.T.); +#344274 = EDGE_LOOP('',(#344275,#344276,#344277,#344278)); +#344275 = ORIENTED_EDGE('',*,*,#344178,.T.); +#344276 = ORIENTED_EDGE('',*,*,#344209,.T.); +#344277 = ORIENTED_EDGE('',*,*,#344240,.T.); +#344278 = ORIENTED_EDGE('',*,*,#344262,.T.); +#344279 = PLANE('',#344280); +#344280 = AXIS2_PLACEMENT_3D('',#344281,#344282,#344283); +#344281 = CARTESIAN_POINT('',(0.,0.,1.51)); +#344282 = DIRECTION('',(0.,0.,1.)); +#344283 = DIRECTION('',(1.,0.,-0.)); +#344284 = ADVANCED_FACE('',(#344285),#344291,.T.); +#344285 = FACE_BOUND('',#344286,.F.); +#344286 = EDGE_LOOP('',(#344287,#344288,#344289,#344290)); +#344287 = ORIENTED_EDGE('',*,*,#344162,.T.); +#344288 = ORIENTED_EDGE('',*,*,#344193,.T.); +#344289 = ORIENTED_EDGE('',*,*,#344224,.T.); +#344290 = ORIENTED_EDGE('',*,*,#344255,.T.); +#344291 = PLANE('',#344292); +#344292 = AXIS2_PLACEMENT_3D('',#344293,#344294,#344295); +#344293 = CARTESIAN_POINT('',(0.,0.,1.55)); +#344294 = DIRECTION('',(0.,0.,1.)); +#344295 = DIRECTION('',(1.,0.,-0.)); +#344296 = MANIFOLD_SOLID_BREP('',#344297); +#344297 = CLOSED_SHELL('',(#344298,#344338,#344369,#344400,#344422, + #344434)); +#344298 = ADVANCED_FACE('',(#344299),#344333,.T.); +#344299 = FACE_BOUND('',#344300,.T.); +#344300 = EDGE_LOOP('',(#344301,#344311,#344319,#344327)); +#344301 = ORIENTED_EDGE('',*,*,#344302,.T.); +#344302 = EDGE_CURVE('',#344303,#344305,#344307,.T.); +#344303 = VERTEX_POINT('',#344304); +#344304 = CARTESIAN_POINT('',(146.,-75.26,1.51)); +#344305 = VERTEX_POINT('',#344306); +#344306 = CARTESIAN_POINT('',(146.,-75.26,1.55)); +#344307 = LINE('',#344308,#344309); +#344308 = CARTESIAN_POINT('',(146.,-75.26,1.51)); +#344309 = VECTOR('',#344310,1.); +#344310 = DIRECTION('',(0.,0.,1.)); +#344311 = ORIENTED_EDGE('',*,*,#344312,.T.); +#344312 = EDGE_CURVE('',#344305,#344313,#344315,.T.); +#344313 = VERTEX_POINT('',#344314); +#344314 = CARTESIAN_POINT('',(146.,-74.36,1.55)); +#344315 = LINE('',#344316,#344317); +#344316 = CARTESIAN_POINT('',(146.,-75.26,1.55)); +#344317 = VECTOR('',#344318,1.); +#344318 = DIRECTION('',(0.,1.,0.)); +#344319 = ORIENTED_EDGE('',*,*,#344320,.F.); +#344320 = EDGE_CURVE('',#344321,#344313,#344323,.T.); +#344321 = VERTEX_POINT('',#344322); +#344322 = CARTESIAN_POINT('',(146.,-74.36,1.51)); +#344323 = LINE('',#344324,#344325); +#344324 = CARTESIAN_POINT('',(146.,-74.36,1.51)); +#344325 = VECTOR('',#344326,1.); +#344326 = DIRECTION('',(0.,0.,1.)); +#344327 = ORIENTED_EDGE('',*,*,#344328,.F.); +#344328 = EDGE_CURVE('',#344303,#344321,#344329,.T.); +#344329 = LINE('',#344330,#344331); +#344330 = CARTESIAN_POINT('',(146.,-75.26,1.51)); +#344331 = VECTOR('',#344332,1.); +#344332 = DIRECTION('',(0.,1.,0.)); +#344333 = PLANE('',#344334); +#344334 = AXIS2_PLACEMENT_3D('',#344335,#344336,#344337); +#344335 = CARTESIAN_POINT('',(146.,-75.26,1.51)); +#344336 = DIRECTION('',(-1.,0.,0.)); +#344337 = DIRECTION('',(0.,1.,0.)); +#344338 = ADVANCED_FACE('',(#344339),#344364,.T.); +#344339 = FACE_BOUND('',#344340,.T.); +#344340 = EDGE_LOOP('',(#344341,#344342,#344350,#344358)); +#344341 = ORIENTED_EDGE('',*,*,#344320,.T.); +#344342 = ORIENTED_EDGE('',*,*,#344343,.T.); +#344343 = EDGE_CURVE('',#344313,#344344,#344346,.T.); +#344344 = VERTEX_POINT('',#344345); +#344345 = CARTESIAN_POINT('',(147.5,-74.36,1.55)); +#344346 = LINE('',#344347,#344348); +#344347 = CARTESIAN_POINT('',(146.,-74.36,1.55)); +#344348 = VECTOR('',#344349,1.); +#344349 = DIRECTION('',(1.,0.,0.)); +#344350 = ORIENTED_EDGE('',*,*,#344351,.F.); +#344351 = EDGE_CURVE('',#344352,#344344,#344354,.T.); +#344352 = VERTEX_POINT('',#344353); +#344353 = CARTESIAN_POINT('',(147.5,-74.36,1.51)); +#344354 = LINE('',#344355,#344356); +#344355 = CARTESIAN_POINT('',(147.5,-74.36,1.51)); +#344356 = VECTOR('',#344357,1.); +#344357 = DIRECTION('',(0.,0.,1.)); +#344358 = ORIENTED_EDGE('',*,*,#344359,.F.); +#344359 = EDGE_CURVE('',#344321,#344352,#344360,.T.); +#344360 = LINE('',#344361,#344362); +#344361 = CARTESIAN_POINT('',(146.,-74.36,1.51)); +#344362 = VECTOR('',#344363,1.); +#344363 = DIRECTION('',(1.,0.,0.)); +#344364 = PLANE('',#344365); +#344365 = AXIS2_PLACEMENT_3D('',#344366,#344367,#344368); +#344366 = CARTESIAN_POINT('',(146.,-74.36,1.51)); +#344367 = DIRECTION('',(0.,1.,0.)); +#344368 = DIRECTION('',(1.,0.,0.)); +#344369 = ADVANCED_FACE('',(#344370),#344395,.T.); +#344370 = FACE_BOUND('',#344371,.T.); +#344371 = EDGE_LOOP('',(#344372,#344373,#344381,#344389)); +#344372 = ORIENTED_EDGE('',*,*,#344351,.T.); +#344373 = ORIENTED_EDGE('',*,*,#344374,.T.); +#344374 = EDGE_CURVE('',#344344,#344375,#344377,.T.); +#344375 = VERTEX_POINT('',#344376); +#344376 = CARTESIAN_POINT('',(147.5,-75.26,1.55)); +#344377 = LINE('',#344378,#344379); +#344378 = CARTESIAN_POINT('',(147.5,-74.36,1.55)); +#344379 = VECTOR('',#344380,1.); +#344380 = DIRECTION('',(0.,-1.,0.)); +#344381 = ORIENTED_EDGE('',*,*,#344382,.F.); +#344382 = EDGE_CURVE('',#344383,#344375,#344385,.T.); +#344383 = VERTEX_POINT('',#344384); +#344384 = CARTESIAN_POINT('',(147.5,-75.26,1.51)); +#344385 = LINE('',#344386,#344387); +#344386 = CARTESIAN_POINT('',(147.5,-75.26,1.51)); +#344387 = VECTOR('',#344388,1.); +#344388 = DIRECTION('',(0.,0.,1.)); +#344389 = ORIENTED_EDGE('',*,*,#344390,.F.); +#344390 = EDGE_CURVE('',#344352,#344383,#344391,.T.); +#344391 = LINE('',#344392,#344393); +#344392 = CARTESIAN_POINT('',(147.5,-74.36,1.51)); +#344393 = VECTOR('',#344394,1.); +#344394 = DIRECTION('',(0.,-1.,0.)); +#344395 = PLANE('',#344396); +#344396 = AXIS2_PLACEMENT_3D('',#344397,#344398,#344399); +#344397 = CARTESIAN_POINT('',(147.5,-74.36,1.51)); +#344398 = DIRECTION('',(1.,0.,-0.)); +#344399 = DIRECTION('',(0.,-1.,0.)); +#344400 = ADVANCED_FACE('',(#344401),#344417,.T.); +#344401 = FACE_BOUND('',#344402,.T.); +#344402 = EDGE_LOOP('',(#344403,#344404,#344410,#344411)); +#344403 = ORIENTED_EDGE('',*,*,#344382,.T.); +#344404 = ORIENTED_EDGE('',*,*,#344405,.T.); +#344405 = EDGE_CURVE('',#344375,#344305,#344406,.T.); +#344406 = LINE('',#344407,#344408); +#344407 = CARTESIAN_POINT('',(147.5,-75.26,1.55)); +#344408 = VECTOR('',#344409,1.); +#344409 = DIRECTION('',(-1.,0.,0.)); +#344410 = ORIENTED_EDGE('',*,*,#344302,.F.); +#344411 = ORIENTED_EDGE('',*,*,#344412,.F.); +#344412 = EDGE_CURVE('',#344383,#344303,#344413,.T.); +#344413 = LINE('',#344414,#344415); +#344414 = CARTESIAN_POINT('',(147.5,-75.26,1.51)); +#344415 = VECTOR('',#344416,1.); +#344416 = DIRECTION('',(-1.,0.,0.)); +#344417 = PLANE('',#344418); +#344418 = AXIS2_PLACEMENT_3D('',#344419,#344420,#344421); +#344419 = CARTESIAN_POINT('',(147.5,-75.26,1.51)); +#344420 = DIRECTION('',(0.,-1.,0.)); +#344421 = DIRECTION('',(-1.,0.,0.)); +#344422 = ADVANCED_FACE('',(#344423),#344429,.F.); +#344423 = FACE_BOUND('',#344424,.T.); +#344424 = EDGE_LOOP('',(#344425,#344426,#344427,#344428)); +#344425 = ORIENTED_EDGE('',*,*,#344328,.T.); +#344426 = ORIENTED_EDGE('',*,*,#344359,.T.); +#344427 = ORIENTED_EDGE('',*,*,#344390,.T.); +#344428 = ORIENTED_EDGE('',*,*,#344412,.T.); +#344429 = PLANE('',#344430); +#344430 = AXIS2_PLACEMENT_3D('',#344431,#344432,#344433); +#344431 = CARTESIAN_POINT('',(0.,0.,1.51)); +#344432 = DIRECTION('',(0.,0.,1.)); +#344433 = DIRECTION('',(1.,0.,-0.)); +#344434 = ADVANCED_FACE('',(#344435),#344441,.T.); +#344435 = FACE_BOUND('',#344436,.F.); +#344436 = EDGE_LOOP('',(#344437,#344438,#344439,#344440)); +#344437 = ORIENTED_EDGE('',*,*,#344312,.T.); +#344438 = ORIENTED_EDGE('',*,*,#344343,.T.); +#344439 = ORIENTED_EDGE('',*,*,#344374,.T.); +#344440 = ORIENTED_EDGE('',*,*,#344405,.T.); +#344441 = PLANE('',#344442); +#344442 = AXIS2_PLACEMENT_3D('',#344443,#344444,#344445); +#344443 = CARTESIAN_POINT('',(0.,0.,1.55)); +#344444 = DIRECTION('',(0.,0.,1.)); +#344445 = DIRECTION('',(1.,0.,-0.)); +#344446 = MANIFOLD_SOLID_BREP('',#344447); +#344447 = CLOSED_SHELL('',(#344448,#344490,#344521,#344554,#344585, + #344618,#344649,#344682,#344704,#344720)); +#344448 = ADVANCED_FACE('',(#344449),#344485,.T.); +#344449 = FACE_BOUND('',#344450,.T.); +#344450 = EDGE_LOOP('',(#344451,#344461,#344470,#344478)); +#344451 = ORIENTED_EDGE('',*,*,#344452,.T.); +#344452 = EDGE_CURVE('',#344453,#344455,#344457,.T.); +#344453 = VERTEX_POINT('',#344454); +#344454 = CARTESIAN_POINT('',(151.4,-101.5625,1.51)); +#344455 = VERTEX_POINT('',#344456); +#344456 = CARTESIAN_POINT('',(151.4,-101.5625,1.55)); +#344457 = LINE('',#344458,#344459); +#344458 = CARTESIAN_POINT('',(151.4,-101.5625,1.51)); +#344459 = VECTOR('',#344460,1.); +#344460 = DIRECTION('',(0.,0.,1.)); +#344461 = ORIENTED_EDGE('',*,*,#344462,.T.); +#344462 = EDGE_CURVE('',#344455,#344463,#344465,.T.); +#344463 = VERTEX_POINT('',#344464); +#344464 = CARTESIAN_POINT('',(151.5875,-101.375,1.55)); +#344465 = CIRCLE('',#344466,0.187498366229); +#344466 = AXIS2_PLACEMENT_3D('',#344467,#344468,#344469); +#344467 = CARTESIAN_POINT('',(151.58749836622,-101.5624983662,1.55)); +#344468 = DIRECTION('',(0.,0.,-1.)); +#344469 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#344470 = ORIENTED_EDGE('',*,*,#344471,.F.); +#344471 = EDGE_CURVE('',#344472,#344463,#344474,.T.); +#344472 = VERTEX_POINT('',#344473); +#344473 = CARTESIAN_POINT('',(151.5875,-101.375,1.51)); +#344474 = LINE('',#344475,#344476); +#344475 = CARTESIAN_POINT('',(151.5875,-101.375,1.51)); +#344476 = VECTOR('',#344477,1.); +#344477 = DIRECTION('',(0.,0.,1.)); +#344478 = ORIENTED_EDGE('',*,*,#344479,.F.); +#344479 = EDGE_CURVE('',#344453,#344472,#344480,.T.); +#344480 = CIRCLE('',#344481,0.187498366229); +#344481 = AXIS2_PLACEMENT_3D('',#344482,#344483,#344484); +#344482 = CARTESIAN_POINT('',(151.58749836622,-101.5624983662,1.51)); +#344483 = DIRECTION('',(0.,0.,-1.)); +#344484 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#344485 = CYLINDRICAL_SURFACE('',#344486,0.187498366229); +#344486 = AXIS2_PLACEMENT_3D('',#344487,#344488,#344489); +#344487 = CARTESIAN_POINT('',(151.58749836622,-101.5624983662,1.51)); +#344488 = DIRECTION('',(0.,0.,-1.)); +#344489 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#344490 = ADVANCED_FACE('',(#344491),#344516,.T.); +#344491 = FACE_BOUND('',#344492,.T.); +#344492 = EDGE_LOOP('',(#344493,#344494,#344502,#344510)); +#344493 = ORIENTED_EDGE('',*,*,#344471,.T.); +#344494 = ORIENTED_EDGE('',*,*,#344495,.T.); +#344495 = EDGE_CURVE('',#344463,#344496,#344498,.T.); +#344496 = VERTEX_POINT('',#344497); +#344497 = CARTESIAN_POINT('',(153.0125,-101.375,1.55)); +#344498 = LINE('',#344499,#344500); +#344499 = CARTESIAN_POINT('',(151.5875,-101.375,1.55)); +#344500 = VECTOR('',#344501,1.); +#344501 = DIRECTION('',(1.,0.,0.)); +#344502 = ORIENTED_EDGE('',*,*,#344503,.F.); +#344503 = EDGE_CURVE('',#344504,#344496,#344506,.T.); +#344504 = VERTEX_POINT('',#344505); +#344505 = CARTESIAN_POINT('',(153.0125,-101.375,1.51)); +#344506 = LINE('',#344507,#344508); +#344507 = CARTESIAN_POINT('',(153.0125,-101.375,1.51)); +#344508 = VECTOR('',#344509,1.); +#344509 = DIRECTION('',(0.,0.,1.)); +#344510 = ORIENTED_EDGE('',*,*,#344511,.F.); +#344511 = EDGE_CURVE('',#344472,#344504,#344512,.T.); +#344512 = LINE('',#344513,#344514); +#344513 = CARTESIAN_POINT('',(151.5875,-101.375,1.51)); +#344514 = VECTOR('',#344515,1.); +#344515 = DIRECTION('',(1.,0.,0.)); +#344516 = PLANE('',#344517); +#344517 = AXIS2_PLACEMENT_3D('',#344518,#344519,#344520); +#344518 = CARTESIAN_POINT('',(151.5875,-101.375,1.51)); +#344519 = DIRECTION('',(0.,1.,0.)); +#344520 = DIRECTION('',(1.,0.,0.)); +#344521 = ADVANCED_FACE('',(#344522),#344549,.T.); +#344522 = FACE_BOUND('',#344523,.T.); +#344523 = EDGE_LOOP('',(#344524,#344525,#344534,#344542)); +#344524 = ORIENTED_EDGE('',*,*,#344503,.T.); +#344525 = ORIENTED_EDGE('',*,*,#344526,.T.); +#344526 = EDGE_CURVE('',#344496,#344527,#344529,.T.); +#344527 = VERTEX_POINT('',#344528); +#344528 = CARTESIAN_POINT('',(153.2,-101.5625,1.55)); +#344529 = CIRCLE('',#344530,0.187498366229); +#344530 = AXIS2_PLACEMENT_3D('',#344531,#344532,#344533); +#344531 = CARTESIAN_POINT('',(153.01250163377,-101.5624983662,1.55)); +#344532 = DIRECTION('',(0.,0.,-1.)); +#344533 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344534 = ORIENTED_EDGE('',*,*,#344535,.F.); +#344535 = EDGE_CURVE('',#344536,#344527,#344538,.T.); +#344536 = VERTEX_POINT('',#344537); +#344537 = CARTESIAN_POINT('',(153.2,-101.5625,1.51)); +#344538 = LINE('',#344539,#344540); +#344539 = CARTESIAN_POINT('',(153.2,-101.5625,1.51)); +#344540 = VECTOR('',#344541,1.); +#344541 = DIRECTION('',(0.,0.,1.)); +#344542 = ORIENTED_EDGE('',*,*,#344543,.F.); +#344543 = EDGE_CURVE('',#344504,#344536,#344544,.T.); +#344544 = CIRCLE('',#344545,0.187498366229); +#344545 = AXIS2_PLACEMENT_3D('',#344546,#344547,#344548); +#344546 = CARTESIAN_POINT('',(153.01250163377,-101.5624983662,1.51)); +#344547 = DIRECTION('',(0.,0.,-1.)); +#344548 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344549 = CYLINDRICAL_SURFACE('',#344550,0.187498366229); +#344550 = AXIS2_PLACEMENT_3D('',#344551,#344552,#344553); +#344551 = CARTESIAN_POINT('',(153.01250163377,-101.5624983662,1.51)); +#344552 = DIRECTION('',(0.,0.,-1.)); +#344553 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344554 = ADVANCED_FACE('',(#344555),#344580,.T.); +#344555 = FACE_BOUND('',#344556,.T.); +#344556 = EDGE_LOOP('',(#344557,#344558,#344566,#344574)); +#344557 = ORIENTED_EDGE('',*,*,#344535,.T.); +#344558 = ORIENTED_EDGE('',*,*,#344559,.T.); +#344559 = EDGE_CURVE('',#344527,#344560,#344562,.T.); +#344560 = VERTEX_POINT('',#344561); +#344561 = CARTESIAN_POINT('',(153.2,-101.9375,1.55)); +#344562 = LINE('',#344563,#344564); +#344563 = CARTESIAN_POINT('',(153.2,-101.5625,1.55)); +#344564 = VECTOR('',#344565,1.); +#344565 = DIRECTION('',(0.,-1.,0.)); +#344566 = ORIENTED_EDGE('',*,*,#344567,.F.); +#344567 = EDGE_CURVE('',#344568,#344560,#344570,.T.); +#344568 = VERTEX_POINT('',#344569); +#344569 = CARTESIAN_POINT('',(153.2,-101.9375,1.51)); +#344570 = LINE('',#344571,#344572); +#344571 = CARTESIAN_POINT('',(153.2,-101.9375,1.51)); +#344572 = VECTOR('',#344573,1.); +#344573 = DIRECTION('',(0.,0.,1.)); +#344574 = ORIENTED_EDGE('',*,*,#344575,.F.); +#344575 = EDGE_CURVE('',#344536,#344568,#344576,.T.); +#344576 = LINE('',#344577,#344578); +#344577 = CARTESIAN_POINT('',(153.2,-101.5625,1.51)); +#344578 = VECTOR('',#344579,1.); +#344579 = DIRECTION('',(0.,-1.,0.)); +#344580 = PLANE('',#344581); +#344581 = AXIS2_PLACEMENT_3D('',#344582,#344583,#344584); +#344582 = CARTESIAN_POINT('',(153.2,-101.5625,1.51)); +#344583 = DIRECTION('',(1.,0.,-0.)); +#344584 = DIRECTION('',(0.,-1.,0.)); +#344585 = ADVANCED_FACE('',(#344586),#344613,.T.); +#344586 = FACE_BOUND('',#344587,.T.); +#344587 = EDGE_LOOP('',(#344588,#344589,#344598,#344606)); +#344588 = ORIENTED_EDGE('',*,*,#344567,.T.); +#344589 = ORIENTED_EDGE('',*,*,#344590,.T.); +#344590 = EDGE_CURVE('',#344560,#344591,#344593,.T.); +#344591 = VERTEX_POINT('',#344592); +#344592 = CARTESIAN_POINT('',(153.0125,-102.125,1.55)); +#344593 = CIRCLE('',#344594,0.187498366229); +#344594 = AXIS2_PLACEMENT_3D('',#344595,#344596,#344597); +#344595 = CARTESIAN_POINT('',(153.01250163377,-101.9375016337,1.55)); +#344596 = DIRECTION('',(0.,0.,-1.)); +#344597 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#344598 = ORIENTED_EDGE('',*,*,#344599,.F.); +#344599 = EDGE_CURVE('',#344600,#344591,#344602,.T.); +#344600 = VERTEX_POINT('',#344601); +#344601 = CARTESIAN_POINT('',(153.0125,-102.125,1.51)); +#344602 = LINE('',#344603,#344604); +#344603 = CARTESIAN_POINT('',(153.0125,-102.125,1.51)); +#344604 = VECTOR('',#344605,1.); +#344605 = DIRECTION('',(0.,0.,1.)); +#344606 = ORIENTED_EDGE('',*,*,#344607,.F.); +#344607 = EDGE_CURVE('',#344568,#344600,#344608,.T.); +#344608 = CIRCLE('',#344609,0.187498366229); +#344609 = AXIS2_PLACEMENT_3D('',#344610,#344611,#344612); +#344610 = CARTESIAN_POINT('',(153.01250163377,-101.9375016337,1.51)); +#344611 = DIRECTION('',(0.,0.,-1.)); +#344612 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#344613 = CYLINDRICAL_SURFACE('',#344614,0.187498366229); +#344614 = AXIS2_PLACEMENT_3D('',#344615,#344616,#344617); +#344615 = CARTESIAN_POINT('',(153.01250163377,-101.9375016337,1.51)); +#344616 = DIRECTION('',(0.,0.,-1.)); +#344617 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#344618 = ADVANCED_FACE('',(#344619),#344644,.T.); +#344619 = FACE_BOUND('',#344620,.T.); +#344620 = EDGE_LOOP('',(#344621,#344622,#344630,#344638)); +#344621 = ORIENTED_EDGE('',*,*,#344599,.T.); +#344622 = ORIENTED_EDGE('',*,*,#344623,.T.); +#344623 = EDGE_CURVE('',#344591,#344624,#344626,.T.); +#344624 = VERTEX_POINT('',#344625); +#344625 = CARTESIAN_POINT('',(151.5875,-102.125,1.55)); +#344626 = LINE('',#344627,#344628); +#344627 = CARTESIAN_POINT('',(153.0125,-102.125,1.55)); +#344628 = VECTOR('',#344629,1.); +#344629 = DIRECTION('',(-1.,0.,0.)); +#344630 = ORIENTED_EDGE('',*,*,#344631,.F.); +#344631 = EDGE_CURVE('',#344632,#344624,#344634,.T.); +#344632 = VERTEX_POINT('',#344633); +#344633 = CARTESIAN_POINT('',(151.5875,-102.125,1.51)); +#344634 = LINE('',#344635,#344636); +#344635 = CARTESIAN_POINT('',(151.5875,-102.125,1.51)); +#344636 = VECTOR('',#344637,1.); +#344637 = DIRECTION('',(0.,0.,1.)); +#344638 = ORIENTED_EDGE('',*,*,#344639,.F.); +#344639 = EDGE_CURVE('',#344600,#344632,#344640,.T.); +#344640 = LINE('',#344641,#344642); +#344641 = CARTESIAN_POINT('',(153.0125,-102.125,1.51)); +#344642 = VECTOR('',#344643,1.); +#344643 = DIRECTION('',(-1.,0.,0.)); +#344644 = PLANE('',#344645); +#344645 = AXIS2_PLACEMENT_3D('',#344646,#344647,#344648); +#344646 = CARTESIAN_POINT('',(153.0125,-102.125,1.51)); +#344647 = DIRECTION('',(0.,-1.,0.)); +#344648 = DIRECTION('',(-1.,0.,0.)); +#344649 = ADVANCED_FACE('',(#344650),#344677,.T.); +#344650 = FACE_BOUND('',#344651,.T.); +#344651 = EDGE_LOOP('',(#344652,#344653,#344662,#344670)); +#344652 = ORIENTED_EDGE('',*,*,#344631,.T.); +#344653 = ORIENTED_EDGE('',*,*,#344654,.T.); +#344654 = EDGE_CURVE('',#344624,#344655,#344657,.T.); +#344655 = VERTEX_POINT('',#344656); +#344656 = CARTESIAN_POINT('',(151.4,-101.9375,1.55)); +#344657 = CIRCLE('',#344658,0.187498366229); +#344658 = AXIS2_PLACEMENT_3D('',#344659,#344660,#344661); +#344659 = CARTESIAN_POINT('',(151.58749836622,-101.9375016337,1.55)); +#344660 = DIRECTION('',(0.,0.,-1.)); +#344661 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344662 = ORIENTED_EDGE('',*,*,#344663,.F.); +#344663 = EDGE_CURVE('',#344664,#344655,#344666,.T.); +#344664 = VERTEX_POINT('',#344665); +#344665 = CARTESIAN_POINT('',(151.4,-101.9375,1.51)); +#344666 = LINE('',#344667,#344668); +#344667 = CARTESIAN_POINT('',(151.4,-101.9375,1.51)); +#344668 = VECTOR('',#344669,1.); +#344669 = DIRECTION('',(0.,0.,1.)); +#344670 = ORIENTED_EDGE('',*,*,#344671,.F.); +#344671 = EDGE_CURVE('',#344632,#344664,#344672,.T.); +#344672 = CIRCLE('',#344673,0.187498366229); +#344673 = AXIS2_PLACEMENT_3D('',#344674,#344675,#344676); +#344674 = CARTESIAN_POINT('',(151.58749836622,-101.9375016337,1.51)); +#344675 = DIRECTION('',(0.,0.,-1.)); +#344676 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344677 = CYLINDRICAL_SURFACE('',#344678,0.187498366229); +#344678 = AXIS2_PLACEMENT_3D('',#344679,#344680,#344681); +#344679 = CARTESIAN_POINT('',(151.58749836622,-101.9375016337,1.51)); +#344680 = DIRECTION('',(0.,0.,-1.)); +#344681 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344682 = ADVANCED_FACE('',(#344683),#344699,.T.); +#344683 = FACE_BOUND('',#344684,.T.); +#344684 = EDGE_LOOP('',(#344685,#344686,#344692,#344693)); +#344685 = ORIENTED_EDGE('',*,*,#344663,.T.); +#344686 = ORIENTED_EDGE('',*,*,#344687,.T.); +#344687 = EDGE_CURVE('',#344655,#344455,#344688,.T.); +#344688 = LINE('',#344689,#344690); +#344689 = CARTESIAN_POINT('',(151.4,-101.9375,1.55)); +#344690 = VECTOR('',#344691,1.); +#344691 = DIRECTION('',(0.,1.,0.)); +#344692 = ORIENTED_EDGE('',*,*,#344452,.F.); +#344693 = ORIENTED_EDGE('',*,*,#344694,.F.); +#344694 = EDGE_CURVE('',#344664,#344453,#344695,.T.); +#344695 = LINE('',#344696,#344697); +#344696 = CARTESIAN_POINT('',(151.4,-101.9375,1.51)); +#344697 = VECTOR('',#344698,1.); +#344698 = DIRECTION('',(0.,1.,0.)); +#344699 = PLANE('',#344700); +#344700 = AXIS2_PLACEMENT_3D('',#344701,#344702,#344703); +#344701 = CARTESIAN_POINT('',(151.4,-101.9375,1.51)); +#344702 = DIRECTION('',(-1.,0.,0.)); +#344703 = DIRECTION('',(0.,1.,0.)); +#344704 = ADVANCED_FACE('',(#344705),#344715,.F.); +#344705 = FACE_BOUND('',#344706,.T.); +#344706 = EDGE_LOOP('',(#344707,#344708,#344709,#344710,#344711,#344712, + #344713,#344714)); +#344707 = ORIENTED_EDGE('',*,*,#344479,.T.); +#344708 = ORIENTED_EDGE('',*,*,#344511,.T.); +#344709 = ORIENTED_EDGE('',*,*,#344543,.T.); +#344710 = ORIENTED_EDGE('',*,*,#344575,.T.); +#344711 = ORIENTED_EDGE('',*,*,#344607,.T.); +#344712 = ORIENTED_EDGE('',*,*,#344639,.T.); +#344713 = ORIENTED_EDGE('',*,*,#344671,.T.); +#344714 = ORIENTED_EDGE('',*,*,#344694,.T.); +#344715 = PLANE('',#344716); +#344716 = AXIS2_PLACEMENT_3D('',#344717,#344718,#344719); +#344717 = CARTESIAN_POINT('',(0.,0.,1.51)); +#344718 = DIRECTION('',(0.,0.,1.)); +#344719 = DIRECTION('',(1.,0.,-0.)); +#344720 = ADVANCED_FACE('',(#344721),#344731,.T.); +#344721 = FACE_BOUND('',#344722,.F.); +#344722 = EDGE_LOOP('',(#344723,#344724,#344725,#344726,#344727,#344728, + #344729,#344730)); +#344723 = ORIENTED_EDGE('',*,*,#344462,.T.); +#344724 = ORIENTED_EDGE('',*,*,#344495,.T.); +#344725 = ORIENTED_EDGE('',*,*,#344526,.T.); +#344726 = ORIENTED_EDGE('',*,*,#344559,.T.); +#344727 = ORIENTED_EDGE('',*,*,#344590,.T.); +#344728 = ORIENTED_EDGE('',*,*,#344623,.T.); +#344729 = ORIENTED_EDGE('',*,*,#344654,.T.); +#344730 = ORIENTED_EDGE('',*,*,#344687,.T.); +#344731 = PLANE('',#344732); +#344732 = AXIS2_PLACEMENT_3D('',#344733,#344734,#344735); +#344733 = CARTESIAN_POINT('',(0.,0.,1.55)); +#344734 = DIRECTION('',(0.,0.,1.)); +#344735 = DIRECTION('',(1.,0.,-0.)); +#344736 = MANIFOLD_SOLID_BREP('',#344737); +#344737 = CLOSED_SHELL('',(#344738,#344780,#344811,#344844,#344875, + #344908,#344939,#344972,#344994,#345010)); +#344738 = ADVANCED_FACE('',(#344739),#344775,.T.); +#344739 = FACE_BOUND('',#344740,.T.); +#344740 = EDGE_LOOP('',(#344741,#344751,#344760,#344768)); +#344741 = ORIENTED_EDGE('',*,*,#344742,.T.); +#344742 = EDGE_CURVE('',#344743,#344745,#344747,.T.); +#344743 = VERTEX_POINT('',#344744); +#344744 = CARTESIAN_POINT('',(151.4,-99.1125,1.51)); +#344745 = VERTEX_POINT('',#344746); +#344746 = CARTESIAN_POINT('',(151.4,-99.1125,1.55)); +#344747 = LINE('',#344748,#344749); +#344748 = CARTESIAN_POINT('',(151.4,-99.1125,1.51)); +#344749 = VECTOR('',#344750,1.); +#344750 = DIRECTION('',(0.,0.,1.)); +#344751 = ORIENTED_EDGE('',*,*,#344752,.T.); +#344752 = EDGE_CURVE('',#344745,#344753,#344755,.T.); +#344753 = VERTEX_POINT('',#344754); +#344754 = CARTESIAN_POINT('',(151.5875,-98.925,1.55)); +#344755 = CIRCLE('',#344756,0.187498366229); +#344756 = AXIS2_PLACEMENT_3D('',#344757,#344758,#344759); +#344757 = CARTESIAN_POINT('',(151.58749836622,-99.11249836622,1.55)); +#344758 = DIRECTION('',(0.,0.,-1.)); +#344759 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#344760 = ORIENTED_EDGE('',*,*,#344761,.F.); +#344761 = EDGE_CURVE('',#344762,#344753,#344764,.T.); +#344762 = VERTEX_POINT('',#344763); +#344763 = CARTESIAN_POINT('',(151.5875,-98.925,1.51)); +#344764 = LINE('',#344765,#344766); +#344765 = CARTESIAN_POINT('',(151.5875,-98.925,1.51)); +#344766 = VECTOR('',#344767,1.); +#344767 = DIRECTION('',(0.,0.,1.)); +#344768 = ORIENTED_EDGE('',*,*,#344769,.F.); +#344769 = EDGE_CURVE('',#344743,#344762,#344770,.T.); +#344770 = CIRCLE('',#344771,0.187498366229); +#344771 = AXIS2_PLACEMENT_3D('',#344772,#344773,#344774); +#344772 = CARTESIAN_POINT('',(151.58749836622,-99.11249836622,1.51)); +#344773 = DIRECTION('',(0.,0.,-1.)); +#344774 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#344775 = CYLINDRICAL_SURFACE('',#344776,0.187498366229); +#344776 = AXIS2_PLACEMENT_3D('',#344777,#344778,#344779); +#344777 = CARTESIAN_POINT('',(151.58749836622,-99.11249836622,1.51)); +#344778 = DIRECTION('',(0.,0.,-1.)); +#344779 = DIRECTION('',(-0.999999999962,-8.713558506504E-06,-0.)); +#344780 = ADVANCED_FACE('',(#344781),#344806,.T.); +#344781 = FACE_BOUND('',#344782,.T.); +#344782 = EDGE_LOOP('',(#344783,#344784,#344792,#344800)); +#344783 = ORIENTED_EDGE('',*,*,#344761,.T.); +#344784 = ORIENTED_EDGE('',*,*,#344785,.T.); +#344785 = EDGE_CURVE('',#344753,#344786,#344788,.T.); +#344786 = VERTEX_POINT('',#344787); +#344787 = CARTESIAN_POINT('',(153.0125,-98.925,1.55)); +#344788 = LINE('',#344789,#344790); +#344789 = CARTESIAN_POINT('',(151.5875,-98.925,1.55)); +#344790 = VECTOR('',#344791,1.); +#344791 = DIRECTION('',(1.,0.,0.)); +#344792 = ORIENTED_EDGE('',*,*,#344793,.F.); +#344793 = EDGE_CURVE('',#344794,#344786,#344796,.T.); +#344794 = VERTEX_POINT('',#344795); +#344795 = CARTESIAN_POINT('',(153.0125,-98.925,1.51)); +#344796 = LINE('',#344797,#344798); +#344797 = CARTESIAN_POINT('',(153.0125,-98.925,1.51)); +#344798 = VECTOR('',#344799,1.); +#344799 = DIRECTION('',(0.,0.,1.)); +#344800 = ORIENTED_EDGE('',*,*,#344801,.F.); +#344801 = EDGE_CURVE('',#344762,#344794,#344802,.T.); +#344802 = LINE('',#344803,#344804); +#344803 = CARTESIAN_POINT('',(151.5875,-98.925,1.51)); +#344804 = VECTOR('',#344805,1.); +#344805 = DIRECTION('',(1.,0.,0.)); +#344806 = PLANE('',#344807); +#344807 = AXIS2_PLACEMENT_3D('',#344808,#344809,#344810); +#344808 = CARTESIAN_POINT('',(151.5875,-98.925,1.51)); +#344809 = DIRECTION('',(0.,1.,0.)); +#344810 = DIRECTION('',(1.,0.,0.)); +#344811 = ADVANCED_FACE('',(#344812),#344839,.T.); +#344812 = FACE_BOUND('',#344813,.T.); +#344813 = EDGE_LOOP('',(#344814,#344815,#344824,#344832)); +#344814 = ORIENTED_EDGE('',*,*,#344793,.T.); +#344815 = ORIENTED_EDGE('',*,*,#344816,.T.); +#344816 = EDGE_CURVE('',#344786,#344817,#344819,.T.); +#344817 = VERTEX_POINT('',#344818); +#344818 = CARTESIAN_POINT('',(153.2,-99.1125,1.55)); +#344819 = CIRCLE('',#344820,0.187498366229); +#344820 = AXIS2_PLACEMENT_3D('',#344821,#344822,#344823); +#344821 = CARTESIAN_POINT('',(153.01250163377,-99.11249836622,1.55)); +#344822 = DIRECTION('',(0.,0.,-1.)); +#344823 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344824 = ORIENTED_EDGE('',*,*,#344825,.F.); +#344825 = EDGE_CURVE('',#344826,#344817,#344828,.T.); +#344826 = VERTEX_POINT('',#344827); +#344827 = CARTESIAN_POINT('',(153.2,-99.1125,1.51)); +#344828 = LINE('',#344829,#344830); +#344829 = CARTESIAN_POINT('',(153.2,-99.1125,1.51)); +#344830 = VECTOR('',#344831,1.); +#344831 = DIRECTION('',(0.,0.,1.)); +#344832 = ORIENTED_EDGE('',*,*,#344833,.F.); +#344833 = EDGE_CURVE('',#344794,#344826,#344834,.T.); +#344834 = CIRCLE('',#344835,0.187498366229); +#344835 = AXIS2_PLACEMENT_3D('',#344836,#344837,#344838); +#344836 = CARTESIAN_POINT('',(153.01250163377,-99.11249836622,1.51)); +#344837 = DIRECTION('',(0.,0.,-1.)); +#344838 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344839 = CYLINDRICAL_SURFACE('',#344840,0.187498366229); +#344840 = AXIS2_PLACEMENT_3D('',#344841,#344842,#344843); +#344841 = CARTESIAN_POINT('',(153.01250163377,-99.11249836622,1.51)); +#344842 = DIRECTION('',(0.,0.,-1.)); +#344843 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#344844 = ADVANCED_FACE('',(#344845),#344870,.T.); +#344845 = FACE_BOUND('',#344846,.T.); +#344846 = EDGE_LOOP('',(#344847,#344848,#344856,#344864)); +#344847 = ORIENTED_EDGE('',*,*,#344825,.T.); +#344848 = ORIENTED_EDGE('',*,*,#344849,.T.); +#344849 = EDGE_CURVE('',#344817,#344850,#344852,.T.); +#344850 = VERTEX_POINT('',#344851); +#344851 = CARTESIAN_POINT('',(153.2,-99.4875,1.55)); +#344852 = LINE('',#344853,#344854); +#344853 = CARTESIAN_POINT('',(153.2,-99.1125,1.55)); +#344854 = VECTOR('',#344855,1.); +#344855 = DIRECTION('',(0.,-1.,0.)); +#344856 = ORIENTED_EDGE('',*,*,#344857,.F.); +#344857 = EDGE_CURVE('',#344858,#344850,#344860,.T.); +#344858 = VERTEX_POINT('',#344859); +#344859 = CARTESIAN_POINT('',(153.2,-99.4875,1.51)); +#344860 = LINE('',#344861,#344862); +#344861 = CARTESIAN_POINT('',(153.2,-99.4875,1.51)); +#344862 = VECTOR('',#344863,1.); +#344863 = DIRECTION('',(0.,0.,1.)); +#344864 = ORIENTED_EDGE('',*,*,#344865,.F.); +#344865 = EDGE_CURVE('',#344826,#344858,#344866,.T.); +#344866 = LINE('',#344867,#344868); +#344867 = CARTESIAN_POINT('',(153.2,-99.1125,1.51)); +#344868 = VECTOR('',#344869,1.); +#344869 = DIRECTION('',(0.,-1.,0.)); +#344870 = PLANE('',#344871); +#344871 = AXIS2_PLACEMENT_3D('',#344872,#344873,#344874); +#344872 = CARTESIAN_POINT('',(153.2,-99.1125,1.51)); +#344873 = DIRECTION('',(1.,0.,-0.)); +#344874 = DIRECTION('',(0.,-1.,0.)); +#344875 = ADVANCED_FACE('',(#344876),#344903,.T.); +#344876 = FACE_BOUND('',#344877,.T.); +#344877 = EDGE_LOOP('',(#344878,#344879,#344888,#344896)); +#344878 = ORIENTED_EDGE('',*,*,#344857,.T.); +#344879 = ORIENTED_EDGE('',*,*,#344880,.T.); +#344880 = EDGE_CURVE('',#344850,#344881,#344883,.T.); +#344881 = VERTEX_POINT('',#344882); +#344882 = CARTESIAN_POINT('',(153.0125,-99.675,1.55)); +#344883 = CIRCLE('',#344884,0.187498366229); +#344884 = AXIS2_PLACEMENT_3D('',#344885,#344886,#344887); +#344885 = CARTESIAN_POINT('',(153.01250163377,-99.48750163377,1.55)); +#344886 = DIRECTION('',(0.,0.,-1.)); +#344887 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#344888 = ORIENTED_EDGE('',*,*,#344889,.F.); +#344889 = EDGE_CURVE('',#344890,#344881,#344892,.T.); +#344890 = VERTEX_POINT('',#344891); +#344891 = CARTESIAN_POINT('',(153.0125,-99.675,1.51)); +#344892 = LINE('',#344893,#344894); +#344893 = CARTESIAN_POINT('',(153.0125,-99.675,1.51)); +#344894 = VECTOR('',#344895,1.); +#344895 = DIRECTION('',(0.,0.,1.)); +#344896 = ORIENTED_EDGE('',*,*,#344897,.F.); +#344897 = EDGE_CURVE('',#344858,#344890,#344898,.T.); +#344898 = CIRCLE('',#344899,0.187498366229); +#344899 = AXIS2_PLACEMENT_3D('',#344900,#344901,#344902); +#344900 = CARTESIAN_POINT('',(153.01250163377,-99.48750163377,1.51)); +#344901 = DIRECTION('',(0.,0.,-1.)); +#344902 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#344903 = CYLINDRICAL_SURFACE('',#344904,0.187498366229); +#344904 = AXIS2_PLACEMENT_3D('',#344905,#344906,#344907); +#344905 = CARTESIAN_POINT('',(153.01250163377,-99.48750163377,1.51)); +#344906 = DIRECTION('',(0.,0.,-1.)); +#344907 = DIRECTION('',(0.999999999962,8.713558506504E-06,0.)); +#344908 = ADVANCED_FACE('',(#344909),#344934,.T.); +#344909 = FACE_BOUND('',#344910,.T.); +#344910 = EDGE_LOOP('',(#344911,#344912,#344920,#344928)); +#344911 = ORIENTED_EDGE('',*,*,#344889,.T.); +#344912 = ORIENTED_EDGE('',*,*,#344913,.T.); +#344913 = EDGE_CURVE('',#344881,#344914,#344916,.T.); +#344914 = VERTEX_POINT('',#344915); +#344915 = CARTESIAN_POINT('',(151.5875,-99.675,1.55)); +#344916 = LINE('',#344917,#344918); +#344917 = CARTESIAN_POINT('',(153.0125,-99.675,1.55)); +#344918 = VECTOR('',#344919,1.); +#344919 = DIRECTION('',(-1.,0.,0.)); +#344920 = ORIENTED_EDGE('',*,*,#344921,.F.); +#344921 = EDGE_CURVE('',#344922,#344914,#344924,.T.); +#344922 = VERTEX_POINT('',#344923); +#344923 = CARTESIAN_POINT('',(151.5875,-99.675,1.51)); +#344924 = LINE('',#344925,#344926); +#344925 = CARTESIAN_POINT('',(151.5875,-99.675,1.51)); +#344926 = VECTOR('',#344927,1.); +#344927 = DIRECTION('',(0.,0.,1.)); +#344928 = ORIENTED_EDGE('',*,*,#344929,.F.); +#344929 = EDGE_CURVE('',#344890,#344922,#344930,.T.); +#344930 = LINE('',#344931,#344932); +#344931 = CARTESIAN_POINT('',(153.0125,-99.675,1.51)); +#344932 = VECTOR('',#344933,1.); +#344933 = DIRECTION('',(-1.,0.,0.)); +#344934 = PLANE('',#344935); +#344935 = AXIS2_PLACEMENT_3D('',#344936,#344937,#344938); +#344936 = CARTESIAN_POINT('',(153.0125,-99.675,1.51)); +#344937 = DIRECTION('',(0.,-1.,0.)); +#344938 = DIRECTION('',(-1.,0.,0.)); +#344939 = ADVANCED_FACE('',(#344940),#344967,.T.); +#344940 = FACE_BOUND('',#344941,.T.); +#344941 = EDGE_LOOP('',(#344942,#344943,#344952,#344960)); +#344942 = ORIENTED_EDGE('',*,*,#344921,.T.); +#344943 = ORIENTED_EDGE('',*,*,#344944,.T.); +#344944 = EDGE_CURVE('',#344914,#344945,#344947,.T.); +#344945 = VERTEX_POINT('',#344946); +#344946 = CARTESIAN_POINT('',(151.4,-99.4875,1.55)); +#344947 = CIRCLE('',#344948,0.187498366229); +#344948 = AXIS2_PLACEMENT_3D('',#344949,#344950,#344951); +#344949 = CARTESIAN_POINT('',(151.58749836622,-99.48750163377,1.55)); +#344950 = DIRECTION('',(0.,0.,-1.)); +#344951 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344952 = ORIENTED_EDGE('',*,*,#344953,.F.); +#344953 = EDGE_CURVE('',#344954,#344945,#344956,.T.); +#344954 = VERTEX_POINT('',#344955); +#344955 = CARTESIAN_POINT('',(151.4,-99.4875,1.51)); +#344956 = LINE('',#344957,#344958); +#344957 = CARTESIAN_POINT('',(151.4,-99.4875,1.51)); +#344958 = VECTOR('',#344959,1.); +#344959 = DIRECTION('',(0.,0.,1.)); +#344960 = ORIENTED_EDGE('',*,*,#344961,.F.); +#344961 = EDGE_CURVE('',#344922,#344954,#344962,.T.); +#344962 = CIRCLE('',#344963,0.187498366229); +#344963 = AXIS2_PLACEMENT_3D('',#344964,#344965,#344966); +#344964 = CARTESIAN_POINT('',(151.58749836622,-99.48750163377,1.51)); +#344965 = DIRECTION('',(0.,0.,-1.)); +#344966 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344967 = CYLINDRICAL_SURFACE('',#344968,0.187498366229); +#344968 = AXIS2_PLACEMENT_3D('',#344969,#344970,#344971); +#344969 = CARTESIAN_POINT('',(151.58749836622,-99.48750163377,1.51)); +#344970 = DIRECTION('',(0.,0.,-1.)); +#344971 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#344972 = ADVANCED_FACE('',(#344973),#344989,.T.); +#344973 = FACE_BOUND('',#344974,.T.); +#344974 = EDGE_LOOP('',(#344975,#344976,#344982,#344983)); +#344975 = ORIENTED_EDGE('',*,*,#344953,.T.); +#344976 = ORIENTED_EDGE('',*,*,#344977,.T.); +#344977 = EDGE_CURVE('',#344945,#344745,#344978,.T.); +#344978 = LINE('',#344979,#344980); +#344979 = CARTESIAN_POINT('',(151.4,-99.4875,1.55)); +#344980 = VECTOR('',#344981,1.); +#344981 = DIRECTION('',(0.,1.,0.)); +#344982 = ORIENTED_EDGE('',*,*,#344742,.F.); +#344983 = ORIENTED_EDGE('',*,*,#344984,.F.); +#344984 = EDGE_CURVE('',#344954,#344743,#344985,.T.); +#344985 = LINE('',#344986,#344987); +#344986 = CARTESIAN_POINT('',(151.4,-99.4875,1.51)); +#344987 = VECTOR('',#344988,1.); +#344988 = DIRECTION('',(0.,1.,0.)); +#344989 = PLANE('',#344990); +#344990 = AXIS2_PLACEMENT_3D('',#344991,#344992,#344993); +#344991 = CARTESIAN_POINT('',(151.4,-99.4875,1.51)); +#344992 = DIRECTION('',(-1.,0.,0.)); +#344993 = DIRECTION('',(0.,1.,0.)); +#344994 = ADVANCED_FACE('',(#344995),#345005,.F.); +#344995 = FACE_BOUND('',#344996,.T.); +#344996 = EDGE_LOOP('',(#344997,#344998,#344999,#345000,#345001,#345002, + #345003,#345004)); +#344997 = ORIENTED_EDGE('',*,*,#344769,.T.); +#344998 = ORIENTED_EDGE('',*,*,#344801,.T.); +#344999 = ORIENTED_EDGE('',*,*,#344833,.T.); +#345000 = ORIENTED_EDGE('',*,*,#344865,.T.); +#345001 = ORIENTED_EDGE('',*,*,#344897,.T.); +#345002 = ORIENTED_EDGE('',*,*,#344929,.T.); +#345003 = ORIENTED_EDGE('',*,*,#344961,.T.); +#345004 = ORIENTED_EDGE('',*,*,#344984,.T.); +#345005 = PLANE('',#345006); +#345006 = AXIS2_PLACEMENT_3D('',#345007,#345008,#345009); +#345007 = CARTESIAN_POINT('',(0.,0.,1.51)); +#345008 = DIRECTION('',(0.,0.,1.)); +#345009 = DIRECTION('',(1.,0.,-0.)); +#345010 = ADVANCED_FACE('',(#345011),#345021,.T.); +#345011 = FACE_BOUND('',#345012,.F.); +#345012 = EDGE_LOOP('',(#345013,#345014,#345015,#345016,#345017,#345018, + #345019,#345020)); +#345013 = ORIENTED_EDGE('',*,*,#344752,.T.); +#345014 = ORIENTED_EDGE('',*,*,#344785,.T.); +#345015 = ORIENTED_EDGE('',*,*,#344816,.T.); +#345016 = ORIENTED_EDGE('',*,*,#344849,.T.); +#345017 = ORIENTED_EDGE('',*,*,#344880,.T.); +#345018 = ORIENTED_EDGE('',*,*,#344913,.T.); +#345019 = ORIENTED_EDGE('',*,*,#344944,.T.); +#345020 = ORIENTED_EDGE('',*,*,#344977,.T.); +#345021 = PLANE('',#345022); +#345022 = AXIS2_PLACEMENT_3D('',#345023,#345024,#345025); +#345023 = CARTESIAN_POINT('',(0.,0.,1.55)); +#345024 = DIRECTION('',(0.,0.,1.)); +#345025 = DIRECTION('',(1.,0.,-0.)); +#345026 = MANIFOLD_SOLID_BREP('',#345027); +#345027 = CLOSED_SHELL('',(#345028,#345068,#345099,#345130,#345152, + #345164)); +#345028 = ADVANCED_FACE('',(#345029),#345063,.T.); +#345029 = FACE_BOUND('',#345030,.T.); +#345030 = EDGE_LOOP('',(#345031,#345041,#345049,#345057)); +#345031 = ORIENTED_EDGE('',*,*,#345032,.T.); +#345032 = EDGE_CURVE('',#345033,#345035,#345037,.T.); +#345033 = VERTEX_POINT('',#345034); +#345034 = CARTESIAN_POINT('',(146.,-73.99,1.51)); +#345035 = VERTEX_POINT('',#345036); +#345036 = CARTESIAN_POINT('',(146.,-73.99,1.55)); +#345037 = LINE('',#345038,#345039); +#345038 = CARTESIAN_POINT('',(146.,-73.99,1.51)); +#345039 = VECTOR('',#345040,1.); +#345040 = DIRECTION('',(0.,0.,1.)); +#345041 = ORIENTED_EDGE('',*,*,#345042,.T.); +#345042 = EDGE_CURVE('',#345035,#345043,#345045,.T.); +#345043 = VERTEX_POINT('',#345044); +#345044 = CARTESIAN_POINT('',(146.,-73.09,1.55)); +#345045 = LINE('',#345046,#345047); +#345046 = CARTESIAN_POINT('',(146.,-73.99,1.55)); +#345047 = VECTOR('',#345048,1.); +#345048 = DIRECTION('',(0.,1.,0.)); +#345049 = ORIENTED_EDGE('',*,*,#345050,.F.); +#345050 = EDGE_CURVE('',#345051,#345043,#345053,.T.); +#345051 = VERTEX_POINT('',#345052); +#345052 = CARTESIAN_POINT('',(146.,-73.09,1.51)); +#345053 = LINE('',#345054,#345055); +#345054 = CARTESIAN_POINT('',(146.,-73.09,1.51)); +#345055 = VECTOR('',#345056,1.); +#345056 = DIRECTION('',(0.,0.,1.)); +#345057 = ORIENTED_EDGE('',*,*,#345058,.F.); +#345058 = EDGE_CURVE('',#345033,#345051,#345059,.T.); +#345059 = LINE('',#345060,#345061); +#345060 = CARTESIAN_POINT('',(146.,-73.99,1.51)); +#345061 = VECTOR('',#345062,1.); +#345062 = DIRECTION('',(0.,1.,0.)); +#345063 = PLANE('',#345064); +#345064 = AXIS2_PLACEMENT_3D('',#345065,#345066,#345067); +#345065 = CARTESIAN_POINT('',(146.,-73.99,1.51)); +#345066 = DIRECTION('',(-1.,0.,0.)); +#345067 = DIRECTION('',(0.,1.,0.)); +#345068 = ADVANCED_FACE('',(#345069),#345094,.T.); +#345069 = FACE_BOUND('',#345070,.T.); +#345070 = EDGE_LOOP('',(#345071,#345072,#345080,#345088)); +#345071 = ORIENTED_EDGE('',*,*,#345050,.T.); +#345072 = ORIENTED_EDGE('',*,*,#345073,.T.); +#345073 = EDGE_CURVE('',#345043,#345074,#345076,.T.); +#345074 = VERTEX_POINT('',#345075); +#345075 = CARTESIAN_POINT('',(147.5,-73.09,1.55)); +#345076 = LINE('',#345077,#345078); +#345077 = CARTESIAN_POINT('',(146.,-73.09,1.55)); +#345078 = VECTOR('',#345079,1.); +#345079 = DIRECTION('',(1.,0.,0.)); +#345080 = ORIENTED_EDGE('',*,*,#345081,.F.); +#345081 = EDGE_CURVE('',#345082,#345074,#345084,.T.); +#345082 = VERTEX_POINT('',#345083); +#345083 = CARTESIAN_POINT('',(147.5,-73.09,1.51)); +#345084 = LINE('',#345085,#345086); +#345085 = CARTESIAN_POINT('',(147.5,-73.09,1.51)); +#345086 = VECTOR('',#345087,1.); +#345087 = DIRECTION('',(0.,0.,1.)); +#345088 = ORIENTED_EDGE('',*,*,#345089,.F.); +#345089 = EDGE_CURVE('',#345051,#345082,#345090,.T.); +#345090 = LINE('',#345091,#345092); +#345091 = CARTESIAN_POINT('',(146.,-73.09,1.51)); +#345092 = VECTOR('',#345093,1.); +#345093 = DIRECTION('',(1.,0.,0.)); +#345094 = PLANE('',#345095); +#345095 = AXIS2_PLACEMENT_3D('',#345096,#345097,#345098); +#345096 = CARTESIAN_POINT('',(146.,-73.09,1.51)); +#345097 = DIRECTION('',(0.,1.,0.)); +#345098 = DIRECTION('',(1.,0.,0.)); +#345099 = ADVANCED_FACE('',(#345100),#345125,.T.); +#345100 = FACE_BOUND('',#345101,.T.); +#345101 = EDGE_LOOP('',(#345102,#345103,#345111,#345119)); +#345102 = ORIENTED_EDGE('',*,*,#345081,.T.); +#345103 = ORIENTED_EDGE('',*,*,#345104,.T.); +#345104 = EDGE_CURVE('',#345074,#345105,#345107,.T.); +#345105 = VERTEX_POINT('',#345106); +#345106 = CARTESIAN_POINT('',(147.5,-73.99,1.55)); +#345107 = LINE('',#345108,#345109); +#345108 = CARTESIAN_POINT('',(147.5,-73.09,1.55)); +#345109 = VECTOR('',#345110,1.); +#345110 = DIRECTION('',(0.,-1.,0.)); +#345111 = ORIENTED_EDGE('',*,*,#345112,.F.); +#345112 = EDGE_CURVE('',#345113,#345105,#345115,.T.); +#345113 = VERTEX_POINT('',#345114); +#345114 = CARTESIAN_POINT('',(147.5,-73.99,1.51)); +#345115 = LINE('',#345116,#345117); +#345116 = CARTESIAN_POINT('',(147.5,-73.99,1.51)); +#345117 = VECTOR('',#345118,1.); +#345118 = DIRECTION('',(0.,0.,1.)); +#345119 = ORIENTED_EDGE('',*,*,#345120,.F.); +#345120 = EDGE_CURVE('',#345082,#345113,#345121,.T.); +#345121 = LINE('',#345122,#345123); +#345122 = CARTESIAN_POINT('',(147.5,-73.09,1.51)); +#345123 = VECTOR('',#345124,1.); +#345124 = DIRECTION('',(0.,-1.,0.)); +#345125 = PLANE('',#345126); +#345126 = AXIS2_PLACEMENT_3D('',#345127,#345128,#345129); +#345127 = CARTESIAN_POINT('',(147.5,-73.09,1.51)); +#345128 = DIRECTION('',(1.,0.,-0.)); +#345129 = DIRECTION('',(0.,-1.,0.)); +#345130 = ADVANCED_FACE('',(#345131),#345147,.T.); +#345131 = FACE_BOUND('',#345132,.T.); +#345132 = EDGE_LOOP('',(#345133,#345134,#345140,#345141)); +#345133 = ORIENTED_EDGE('',*,*,#345112,.T.); +#345134 = ORIENTED_EDGE('',*,*,#345135,.T.); +#345135 = EDGE_CURVE('',#345105,#345035,#345136,.T.); +#345136 = LINE('',#345137,#345138); +#345137 = CARTESIAN_POINT('',(147.5,-73.99,1.55)); +#345138 = VECTOR('',#345139,1.); +#345139 = DIRECTION('',(-1.,0.,0.)); +#345140 = ORIENTED_EDGE('',*,*,#345032,.F.); +#345141 = ORIENTED_EDGE('',*,*,#345142,.F.); +#345142 = EDGE_CURVE('',#345113,#345033,#345143,.T.); +#345143 = LINE('',#345144,#345145); +#345144 = CARTESIAN_POINT('',(147.5,-73.99,1.51)); +#345145 = VECTOR('',#345146,1.); +#345146 = DIRECTION('',(-1.,0.,0.)); +#345147 = PLANE('',#345148); +#345148 = AXIS2_PLACEMENT_3D('',#345149,#345150,#345151); +#345149 = CARTESIAN_POINT('',(147.5,-73.99,1.51)); +#345150 = DIRECTION('',(0.,-1.,0.)); +#345151 = DIRECTION('',(-1.,0.,0.)); +#345152 = ADVANCED_FACE('',(#345153),#345159,.F.); +#345153 = FACE_BOUND('',#345154,.T.); +#345154 = EDGE_LOOP('',(#345155,#345156,#345157,#345158)); +#345155 = ORIENTED_EDGE('',*,*,#345058,.T.); +#345156 = ORIENTED_EDGE('',*,*,#345089,.T.); +#345157 = ORIENTED_EDGE('',*,*,#345120,.T.); +#345158 = ORIENTED_EDGE('',*,*,#345142,.T.); +#345159 = PLANE('',#345160); +#345160 = AXIS2_PLACEMENT_3D('',#345161,#345162,#345163); +#345161 = CARTESIAN_POINT('',(0.,0.,1.51)); +#345162 = DIRECTION('',(0.,0.,1.)); +#345163 = DIRECTION('',(1.,0.,-0.)); +#345164 = ADVANCED_FACE('',(#345165),#345171,.T.); +#345165 = FACE_BOUND('',#345166,.F.); +#345166 = EDGE_LOOP('',(#345167,#345168,#345169,#345170)); +#345167 = ORIENTED_EDGE('',*,*,#345042,.T.); +#345168 = ORIENTED_EDGE('',*,*,#345073,.T.); +#345169 = ORIENTED_EDGE('',*,*,#345104,.T.); +#345170 = ORIENTED_EDGE('',*,*,#345135,.T.); +#345171 = PLANE('',#345172); +#345172 = AXIS2_PLACEMENT_3D('',#345173,#345174,#345175); +#345173 = CARTESIAN_POINT('',(0.,0.,1.55)); +#345174 = DIRECTION('',(0.,0.,1.)); +#345175 = DIRECTION('',(1.,0.,-0.)); +#345176 = MANIFOLD_SOLID_BREP('',#345177); +#345177 = CLOSED_SHELL('',(#345178,#345220,#345251,#345284,#345315, + #345348,#345379,#345412,#345434,#345450)); +#345178 = ADVANCED_FACE('',(#345179),#345215,.T.); +#345179 = FACE_BOUND('',#345180,.T.); +#345180 = EDGE_LOOP('',(#345181,#345191,#345200,#345208)); +#345181 = ORIENTED_EDGE('',*,*,#345182,.T.); +#345182 = EDGE_CURVE('',#345183,#345185,#345187,.T.); +#345183 = VERTEX_POINT('',#345184); +#345184 = CARTESIAN_POINT('',(151.4,-91.5375,1.51)); +#345185 = VERTEX_POINT('',#345186); +#345186 = CARTESIAN_POINT('',(151.4,-91.5375,1.55)); +#345187 = LINE('',#345188,#345189); +#345188 = CARTESIAN_POINT('',(151.4,-91.5375,1.51)); +#345189 = VECTOR('',#345190,1.); +#345190 = DIRECTION('',(0.,0.,1.)); +#345191 = ORIENTED_EDGE('',*,*,#345192,.T.); +#345192 = EDGE_CURVE('',#345185,#345193,#345195,.T.); +#345193 = VERTEX_POINT('',#345194); +#345194 = CARTESIAN_POINT('',(151.5875,-91.35,1.55)); +#345195 = CIRCLE('',#345196,0.187498366229); +#345196 = AXIS2_PLACEMENT_3D('',#345197,#345198,#345199); +#345197 = CARTESIAN_POINT('',(151.58749836622,-91.53749836622,1.55)); +#345198 = DIRECTION('',(0.,0.,-1.)); +#345199 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#345200 = ORIENTED_EDGE('',*,*,#345201,.F.); +#345201 = EDGE_CURVE('',#345202,#345193,#345204,.T.); +#345202 = VERTEX_POINT('',#345203); +#345203 = CARTESIAN_POINT('',(151.5875,-91.35,1.51)); +#345204 = LINE('',#345205,#345206); +#345205 = CARTESIAN_POINT('',(151.5875,-91.35,1.51)); +#345206 = VECTOR('',#345207,1.); +#345207 = DIRECTION('',(0.,0.,1.)); +#345208 = ORIENTED_EDGE('',*,*,#345209,.F.); +#345209 = EDGE_CURVE('',#345183,#345202,#345210,.T.); +#345210 = CIRCLE('',#345211,0.187498366229); +#345211 = AXIS2_PLACEMENT_3D('',#345212,#345213,#345214); +#345212 = CARTESIAN_POINT('',(151.58749836622,-91.53749836622,1.51)); +#345213 = DIRECTION('',(0.,0.,-1.)); +#345214 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#345215 = CYLINDRICAL_SURFACE('',#345216,0.187498366229); +#345216 = AXIS2_PLACEMENT_3D('',#345217,#345218,#345219); +#345217 = CARTESIAN_POINT('',(151.58749836622,-91.53749836622,1.51)); +#345218 = DIRECTION('',(0.,0.,-1.)); +#345219 = DIRECTION('',(-0.999999999962,-8.713558582296E-06,-0.)); +#345220 = ADVANCED_FACE('',(#345221),#345246,.T.); +#345221 = FACE_BOUND('',#345222,.T.); +#345222 = EDGE_LOOP('',(#345223,#345224,#345232,#345240)); +#345223 = ORIENTED_EDGE('',*,*,#345201,.T.); +#345224 = ORIENTED_EDGE('',*,*,#345225,.T.); +#345225 = EDGE_CURVE('',#345193,#345226,#345228,.T.); +#345226 = VERTEX_POINT('',#345227); +#345227 = CARTESIAN_POINT('',(153.0125,-91.35,1.55)); +#345228 = LINE('',#345229,#345230); +#345229 = CARTESIAN_POINT('',(151.5875,-91.35,1.55)); +#345230 = VECTOR('',#345231,1.); +#345231 = DIRECTION('',(1.,0.,0.)); +#345232 = ORIENTED_EDGE('',*,*,#345233,.F.); +#345233 = EDGE_CURVE('',#345234,#345226,#345236,.T.); +#345234 = VERTEX_POINT('',#345235); +#345235 = CARTESIAN_POINT('',(153.0125,-91.35,1.51)); +#345236 = LINE('',#345237,#345238); +#345237 = CARTESIAN_POINT('',(153.0125,-91.35,1.51)); +#345238 = VECTOR('',#345239,1.); +#345239 = DIRECTION('',(0.,0.,1.)); +#345240 = ORIENTED_EDGE('',*,*,#345241,.F.); +#345241 = EDGE_CURVE('',#345202,#345234,#345242,.T.); +#345242 = LINE('',#345243,#345244); +#345243 = CARTESIAN_POINT('',(151.5875,-91.35,1.51)); +#345244 = VECTOR('',#345245,1.); +#345245 = DIRECTION('',(1.,0.,0.)); +#345246 = PLANE('',#345247); +#345247 = AXIS2_PLACEMENT_3D('',#345248,#345249,#345250); +#345248 = CARTESIAN_POINT('',(151.5875,-91.35,1.51)); +#345249 = DIRECTION('',(0.,1.,0.)); +#345250 = DIRECTION('',(1.,0.,0.)); +#345251 = ADVANCED_FACE('',(#345252),#345279,.T.); +#345252 = FACE_BOUND('',#345253,.T.); +#345253 = EDGE_LOOP('',(#345254,#345255,#345264,#345272)); +#345254 = ORIENTED_EDGE('',*,*,#345233,.T.); +#345255 = ORIENTED_EDGE('',*,*,#345256,.T.); +#345256 = EDGE_CURVE('',#345226,#345257,#345259,.T.); +#345257 = VERTEX_POINT('',#345258); +#345258 = CARTESIAN_POINT('',(153.2,-91.5375,1.55)); +#345259 = CIRCLE('',#345260,0.187498366229); +#345260 = AXIS2_PLACEMENT_3D('',#345261,#345262,#345263); +#345261 = CARTESIAN_POINT('',(153.01250163377,-91.53749836622,1.55)); +#345262 = DIRECTION('',(0.,0.,-1.)); +#345263 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#345264 = ORIENTED_EDGE('',*,*,#345265,.F.); +#345265 = EDGE_CURVE('',#345266,#345257,#345268,.T.); +#345266 = VERTEX_POINT('',#345267); +#345267 = CARTESIAN_POINT('',(153.2,-91.5375,1.51)); +#345268 = LINE('',#345269,#345270); +#345269 = CARTESIAN_POINT('',(153.2,-91.5375,1.51)); +#345270 = VECTOR('',#345271,1.); +#345271 = DIRECTION('',(0.,0.,1.)); +#345272 = ORIENTED_EDGE('',*,*,#345273,.F.); +#345273 = EDGE_CURVE('',#345234,#345266,#345274,.T.); +#345274 = CIRCLE('',#345275,0.187498366229); +#345275 = AXIS2_PLACEMENT_3D('',#345276,#345277,#345278); +#345276 = CARTESIAN_POINT('',(153.01250163377,-91.53749836622,1.51)); +#345277 = DIRECTION('',(0.,0.,-1.)); +#345278 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#345279 = CYLINDRICAL_SURFACE('',#345280,0.187498366229); +#345280 = AXIS2_PLACEMENT_3D('',#345281,#345282,#345283); +#345281 = CARTESIAN_POINT('',(153.01250163377,-91.53749836622,1.51)); +#345282 = DIRECTION('',(0.,0.,-1.)); +#345283 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#345284 = ADVANCED_FACE('',(#345285),#345310,.T.); +#345285 = FACE_BOUND('',#345286,.T.); +#345286 = EDGE_LOOP('',(#345287,#345288,#345296,#345304)); +#345287 = ORIENTED_EDGE('',*,*,#345265,.T.); +#345288 = ORIENTED_EDGE('',*,*,#345289,.T.); +#345289 = EDGE_CURVE('',#345257,#345290,#345292,.T.); +#345290 = VERTEX_POINT('',#345291); +#345291 = CARTESIAN_POINT('',(153.2,-91.9125,1.55)); +#345292 = LINE('',#345293,#345294); +#345293 = CARTESIAN_POINT('',(153.2,-91.5375,1.55)); +#345294 = VECTOR('',#345295,1.); +#345295 = DIRECTION('',(0.,-1.,0.)); +#345296 = ORIENTED_EDGE('',*,*,#345297,.F.); +#345297 = EDGE_CURVE('',#345298,#345290,#345300,.T.); +#345298 = VERTEX_POINT('',#345299); +#345299 = CARTESIAN_POINT('',(153.2,-91.9125,1.51)); +#345300 = LINE('',#345301,#345302); +#345301 = CARTESIAN_POINT('',(153.2,-91.9125,1.51)); +#345302 = VECTOR('',#345303,1.); +#345303 = DIRECTION('',(0.,0.,1.)); +#345304 = ORIENTED_EDGE('',*,*,#345305,.F.); +#345305 = EDGE_CURVE('',#345266,#345298,#345306,.T.); +#345306 = LINE('',#345307,#345308); +#345307 = CARTESIAN_POINT('',(153.2,-91.5375,1.51)); +#345308 = VECTOR('',#345309,1.); +#345309 = DIRECTION('',(0.,-1.,0.)); +#345310 = PLANE('',#345311); +#345311 = AXIS2_PLACEMENT_3D('',#345312,#345313,#345314); +#345312 = CARTESIAN_POINT('',(153.2,-91.5375,1.51)); +#345313 = DIRECTION('',(1.,0.,-0.)); +#345314 = DIRECTION('',(0.,-1.,0.)); +#345315 = ADVANCED_FACE('',(#345316),#345343,.T.); +#345316 = FACE_BOUND('',#345317,.T.); +#345317 = EDGE_LOOP('',(#345318,#345319,#345328,#345336)); +#345318 = ORIENTED_EDGE('',*,*,#345297,.T.); +#345319 = ORIENTED_EDGE('',*,*,#345320,.T.); +#345320 = EDGE_CURVE('',#345290,#345321,#345323,.T.); +#345321 = VERTEX_POINT('',#345322); +#345322 = CARTESIAN_POINT('',(153.0125,-92.1,1.55)); +#345323 = CIRCLE('',#345324,0.187498366229); +#345324 = AXIS2_PLACEMENT_3D('',#345325,#345326,#345327); +#345325 = CARTESIAN_POINT('',(153.01250163377,-91.91250163377,1.55)); +#345326 = DIRECTION('',(0.,0.,-1.)); +#345327 = DIRECTION('',(0.999999999962,8.713558658088E-06,0.)); +#345328 = ORIENTED_EDGE('',*,*,#345329,.F.); +#345329 = EDGE_CURVE('',#345330,#345321,#345332,.T.); +#345330 = VERTEX_POINT('',#345331); +#345331 = CARTESIAN_POINT('',(153.0125,-92.1,1.51)); +#345332 = LINE('',#345333,#345334); +#345333 = CARTESIAN_POINT('',(153.0125,-92.1,1.51)); +#345334 = VECTOR('',#345335,1.); +#345335 = DIRECTION('',(0.,0.,1.)); +#345336 = ORIENTED_EDGE('',*,*,#345337,.F.); +#345337 = EDGE_CURVE('',#345298,#345330,#345338,.T.); +#345338 = CIRCLE('',#345339,0.187498366229); +#345339 = AXIS2_PLACEMENT_3D('',#345340,#345341,#345342); +#345340 = CARTESIAN_POINT('',(153.01250163377,-91.91250163377,1.51)); +#345341 = DIRECTION('',(0.,0.,-1.)); +#345342 = DIRECTION('',(0.999999999962,8.713558658088E-06,0.)); +#345343 = CYLINDRICAL_SURFACE('',#345344,0.187498366229); +#345344 = AXIS2_PLACEMENT_3D('',#345345,#345346,#345347); +#345345 = CARTESIAN_POINT('',(153.01250163377,-91.91250163377,1.51)); +#345346 = DIRECTION('',(0.,0.,-1.)); +#345347 = DIRECTION('',(0.999999999962,8.713558658088E-06,0.)); +#345348 = ADVANCED_FACE('',(#345349),#345374,.T.); +#345349 = FACE_BOUND('',#345350,.T.); +#345350 = EDGE_LOOP('',(#345351,#345352,#345360,#345368)); +#345351 = ORIENTED_EDGE('',*,*,#345329,.T.); +#345352 = ORIENTED_EDGE('',*,*,#345353,.T.); +#345353 = EDGE_CURVE('',#345321,#345354,#345356,.T.); +#345354 = VERTEX_POINT('',#345355); +#345355 = CARTESIAN_POINT('',(151.5875,-92.1,1.55)); +#345356 = LINE('',#345357,#345358); +#345357 = CARTESIAN_POINT('',(153.0125,-92.1,1.55)); +#345358 = VECTOR('',#345359,1.); +#345359 = DIRECTION('',(-1.,0.,0.)); +#345360 = ORIENTED_EDGE('',*,*,#345361,.F.); +#345361 = EDGE_CURVE('',#345362,#345354,#345364,.T.); +#345362 = VERTEX_POINT('',#345363); +#345363 = CARTESIAN_POINT('',(151.5875,-92.1,1.51)); +#345364 = LINE('',#345365,#345366); +#345365 = CARTESIAN_POINT('',(151.5875,-92.1,1.51)); +#345366 = VECTOR('',#345367,1.); +#345367 = DIRECTION('',(0.,0.,1.)); +#345368 = ORIENTED_EDGE('',*,*,#345369,.F.); +#345369 = EDGE_CURVE('',#345330,#345362,#345370,.T.); +#345370 = LINE('',#345371,#345372); +#345371 = CARTESIAN_POINT('',(153.0125,-92.1,1.51)); +#345372 = VECTOR('',#345373,1.); +#345373 = DIRECTION('',(-1.,0.,0.)); +#345374 = PLANE('',#345375); +#345375 = AXIS2_PLACEMENT_3D('',#345376,#345377,#345378); +#345376 = CARTESIAN_POINT('',(153.0125,-92.1,1.51)); +#345377 = DIRECTION('',(0.,-1.,0.)); +#345378 = DIRECTION('',(-1.,0.,0.)); +#345379 = ADVANCED_FACE('',(#345380),#345407,.T.); +#345380 = FACE_BOUND('',#345381,.T.); +#345381 = EDGE_LOOP('',(#345382,#345383,#345392,#345400)); +#345382 = ORIENTED_EDGE('',*,*,#345361,.T.); +#345383 = ORIENTED_EDGE('',*,*,#345384,.T.); +#345384 = EDGE_CURVE('',#345354,#345385,#345387,.T.); +#345385 = VERTEX_POINT('',#345386); +#345386 = CARTESIAN_POINT('',(151.4,-91.9125,1.55)); +#345387 = CIRCLE('',#345388,0.187498366229); +#345388 = AXIS2_PLACEMENT_3D('',#345389,#345390,#345391); +#345389 = CARTESIAN_POINT('',(151.58749836622,-91.91250163377,1.55)); +#345390 = DIRECTION('',(0.,0.,-1.)); +#345391 = DIRECTION('',(8.713558582297E-06,-0.999999999962,0.)); +#345392 = ORIENTED_EDGE('',*,*,#345393,.F.); +#345393 = EDGE_CURVE('',#345394,#345385,#345396,.T.); +#345394 = VERTEX_POINT('',#345395); +#345395 = CARTESIAN_POINT('',(151.4,-91.9125,1.51)); +#345396 = LINE('',#345397,#345398); +#345397 = CARTESIAN_POINT('',(151.4,-91.9125,1.51)); +#345398 = VECTOR('',#345399,1.); +#345399 = DIRECTION('',(0.,0.,1.)); +#345400 = ORIENTED_EDGE('',*,*,#345401,.F.); +#345401 = EDGE_CURVE('',#345362,#345394,#345402,.T.); +#345402 = CIRCLE('',#345403,0.187498366229); +#345403 = AXIS2_PLACEMENT_3D('',#345404,#345405,#345406); +#345404 = CARTESIAN_POINT('',(151.58749836622,-91.91250163377,1.51)); +#345405 = DIRECTION('',(0.,0.,-1.)); +#345406 = DIRECTION('',(8.713558582297E-06,-0.999999999962,0.)); +#345407 = CYLINDRICAL_SURFACE('',#345408,0.187498366229); +#345408 = AXIS2_PLACEMENT_3D('',#345409,#345410,#345411); +#345409 = CARTESIAN_POINT('',(151.58749836622,-91.91250163377,1.51)); +#345410 = DIRECTION('',(0.,0.,-1.)); +#345411 = DIRECTION('',(8.713558582297E-06,-0.999999999962,0.)); +#345412 = ADVANCED_FACE('',(#345413),#345429,.T.); +#345413 = FACE_BOUND('',#345414,.T.); +#345414 = EDGE_LOOP('',(#345415,#345416,#345422,#345423)); +#345415 = ORIENTED_EDGE('',*,*,#345393,.T.); +#345416 = ORIENTED_EDGE('',*,*,#345417,.T.); +#345417 = EDGE_CURVE('',#345385,#345185,#345418,.T.); +#345418 = LINE('',#345419,#345420); +#345419 = CARTESIAN_POINT('',(151.4,-91.9125,1.55)); +#345420 = VECTOR('',#345421,1.); +#345421 = DIRECTION('',(0.,1.,0.)); +#345422 = ORIENTED_EDGE('',*,*,#345182,.F.); +#345423 = ORIENTED_EDGE('',*,*,#345424,.F.); +#345424 = EDGE_CURVE('',#345394,#345183,#345425,.T.); +#345425 = LINE('',#345426,#345427); +#345426 = CARTESIAN_POINT('',(151.4,-91.9125,1.51)); +#345427 = VECTOR('',#345428,1.); +#345428 = DIRECTION('',(0.,1.,0.)); +#345429 = PLANE('',#345430); +#345430 = AXIS2_PLACEMENT_3D('',#345431,#345432,#345433); +#345431 = CARTESIAN_POINT('',(151.4,-91.9125,1.51)); +#345432 = DIRECTION('',(-1.,0.,0.)); +#345433 = DIRECTION('',(0.,1.,0.)); +#345434 = ADVANCED_FACE('',(#345435),#345445,.F.); +#345435 = FACE_BOUND('',#345436,.T.); +#345436 = EDGE_LOOP('',(#345437,#345438,#345439,#345440,#345441,#345442, + #345443,#345444)); +#345437 = ORIENTED_EDGE('',*,*,#345209,.T.); +#345438 = ORIENTED_EDGE('',*,*,#345241,.T.); +#345439 = ORIENTED_EDGE('',*,*,#345273,.T.); +#345440 = ORIENTED_EDGE('',*,*,#345305,.T.); +#345441 = ORIENTED_EDGE('',*,*,#345337,.T.); +#345442 = ORIENTED_EDGE('',*,*,#345369,.T.); +#345443 = ORIENTED_EDGE('',*,*,#345401,.T.); +#345444 = ORIENTED_EDGE('',*,*,#345424,.T.); +#345445 = PLANE('',#345446); +#345446 = AXIS2_PLACEMENT_3D('',#345447,#345448,#345449); +#345447 = CARTESIAN_POINT('',(0.,0.,1.51)); +#345448 = DIRECTION('',(0.,0.,1.)); +#345449 = DIRECTION('',(1.,0.,-0.)); +#345450 = ADVANCED_FACE('',(#345451),#345461,.T.); +#345451 = FACE_BOUND('',#345452,.F.); +#345452 = EDGE_LOOP('',(#345453,#345454,#345455,#345456,#345457,#345458, + #345459,#345460)); +#345453 = ORIENTED_EDGE('',*,*,#345192,.T.); +#345454 = ORIENTED_EDGE('',*,*,#345225,.T.); +#345455 = ORIENTED_EDGE('',*,*,#345256,.T.); +#345456 = ORIENTED_EDGE('',*,*,#345289,.T.); +#345457 = ORIENTED_EDGE('',*,*,#345320,.T.); +#345458 = ORIENTED_EDGE('',*,*,#345353,.T.); +#345459 = ORIENTED_EDGE('',*,*,#345384,.T.); +#345460 = ORIENTED_EDGE('',*,*,#345417,.T.); +#345461 = PLANE('',#345462); +#345462 = AXIS2_PLACEMENT_3D('',#345463,#345464,#345465); +#345463 = CARTESIAN_POINT('',(0.,0.,1.55)); +#345464 = DIRECTION('',(0.,0.,1.)); +#345465 = DIRECTION('',(1.,0.,-0.)); +#345466 = MANIFOLD_SOLID_BREP('',#345467); +#345467 = CLOSED_SHELL('',(#345468,#345510,#345541,#345574,#345605, + #345638,#345669,#345702,#345724,#345740)); +#345468 = ADVANCED_FACE('',(#345469),#345505,.T.); +#345469 = FACE_BOUND('',#345470,.T.); +#345470 = EDGE_LOOP('',(#345471,#345481,#345490,#345498)); +#345471 = ORIENTED_EDGE('',*,*,#345472,.T.); +#345472 = EDGE_CURVE('',#345473,#345475,#345477,.T.); +#345473 = VERTEX_POINT('',#345474); +#345474 = CARTESIAN_POINT('',(151.4,-89.0875,1.51)); +#345475 = VERTEX_POINT('',#345476); +#345476 = CARTESIAN_POINT('',(151.4,-89.0875,1.55)); +#345477 = LINE('',#345478,#345479); +#345478 = CARTESIAN_POINT('',(151.4,-89.0875,1.51)); +#345479 = VECTOR('',#345480,1.); +#345480 = DIRECTION('',(0.,0.,1.)); +#345481 = ORIENTED_EDGE('',*,*,#345482,.T.); +#345482 = EDGE_CURVE('',#345475,#345483,#345485,.T.); +#345483 = VERTEX_POINT('',#345484); +#345484 = CARTESIAN_POINT('',(151.5875,-88.9,1.55)); +#345485 = CIRCLE('',#345486,0.187498366229); +#345486 = AXIS2_PLACEMENT_3D('',#345487,#345488,#345489); +#345487 = CARTESIAN_POINT('',(151.58749836622,-89.08749836622,1.55)); +#345488 = DIRECTION('',(0.,0.,-1.)); +#345489 = DIRECTION('',(-0.999999999962,-8.713558658088E-06,-0.)); +#345490 = ORIENTED_EDGE('',*,*,#345491,.F.); +#345491 = EDGE_CURVE('',#345492,#345483,#345494,.T.); +#345492 = VERTEX_POINT('',#345493); +#345493 = CARTESIAN_POINT('',(151.5875,-88.9,1.51)); +#345494 = LINE('',#345495,#345496); +#345495 = CARTESIAN_POINT('',(151.5875,-88.9,1.51)); +#345496 = VECTOR('',#345497,1.); +#345497 = DIRECTION('',(0.,0.,1.)); +#345498 = ORIENTED_EDGE('',*,*,#345499,.F.); +#345499 = EDGE_CURVE('',#345473,#345492,#345500,.T.); +#345500 = CIRCLE('',#345501,0.187498366229); +#345501 = AXIS2_PLACEMENT_3D('',#345502,#345503,#345504); +#345502 = CARTESIAN_POINT('',(151.58749836622,-89.08749836622,1.51)); +#345503 = DIRECTION('',(0.,0.,-1.)); +#345504 = DIRECTION('',(-0.999999999962,-8.713558658088E-06,-0.)); +#345505 = CYLINDRICAL_SURFACE('',#345506,0.187498366229); +#345506 = AXIS2_PLACEMENT_3D('',#345507,#345508,#345509); +#345507 = CARTESIAN_POINT('',(151.58749836622,-89.08749836622,1.51)); +#345508 = DIRECTION('',(0.,0.,-1.)); +#345509 = DIRECTION('',(-0.999999999962,-8.713558658088E-06,-0.)); +#345510 = ADVANCED_FACE('',(#345511),#345536,.T.); +#345511 = FACE_BOUND('',#345512,.T.); +#345512 = EDGE_LOOP('',(#345513,#345514,#345522,#345530)); +#345513 = ORIENTED_EDGE('',*,*,#345491,.T.); +#345514 = ORIENTED_EDGE('',*,*,#345515,.T.); +#345515 = EDGE_CURVE('',#345483,#345516,#345518,.T.); +#345516 = VERTEX_POINT('',#345517); +#345517 = CARTESIAN_POINT('',(153.0125,-88.9,1.55)); +#345518 = LINE('',#345519,#345520); +#345519 = CARTESIAN_POINT('',(151.5875,-88.9,1.55)); +#345520 = VECTOR('',#345521,1.); +#345521 = DIRECTION('',(1.,0.,0.)); +#345522 = ORIENTED_EDGE('',*,*,#345523,.F.); +#345523 = EDGE_CURVE('',#345524,#345516,#345526,.T.); +#345524 = VERTEX_POINT('',#345525); +#345525 = CARTESIAN_POINT('',(153.0125,-88.9,1.51)); +#345526 = LINE('',#345527,#345528); +#345527 = CARTESIAN_POINT('',(153.0125,-88.9,1.51)); +#345528 = VECTOR('',#345529,1.); +#345529 = DIRECTION('',(0.,0.,1.)); +#345530 = ORIENTED_EDGE('',*,*,#345531,.F.); +#345531 = EDGE_CURVE('',#345492,#345524,#345532,.T.); +#345532 = LINE('',#345533,#345534); +#345533 = CARTESIAN_POINT('',(151.5875,-88.9,1.51)); +#345534 = VECTOR('',#345535,1.); +#345535 = DIRECTION('',(1.,0.,0.)); +#345536 = PLANE('',#345537); +#345537 = AXIS2_PLACEMENT_3D('',#345538,#345539,#345540); +#345538 = CARTESIAN_POINT('',(151.5875,-88.9,1.51)); +#345539 = DIRECTION('',(0.,1.,0.)); +#345540 = DIRECTION('',(1.,0.,0.)); +#345541 = ADVANCED_FACE('',(#345542),#345569,.T.); +#345542 = FACE_BOUND('',#345543,.T.); +#345543 = EDGE_LOOP('',(#345544,#345545,#345554,#345562)); +#345544 = ORIENTED_EDGE('',*,*,#345523,.T.); +#345545 = ORIENTED_EDGE('',*,*,#345546,.T.); +#345546 = EDGE_CURVE('',#345516,#345547,#345549,.T.); +#345547 = VERTEX_POINT('',#345548); +#345548 = CARTESIAN_POINT('',(153.2,-89.0875,1.55)); +#345549 = CIRCLE('',#345550,0.187498366229); +#345550 = AXIS2_PLACEMENT_3D('',#345551,#345552,#345553); +#345551 = CARTESIAN_POINT('',(153.01250163377,-89.08749836622,1.55)); +#345552 = DIRECTION('',(0.,0.,-1.)); +#345553 = DIRECTION('',(-8.713558582297E-06,0.999999999962,0.)); +#345554 = ORIENTED_EDGE('',*,*,#345555,.F.); +#345555 = EDGE_CURVE('',#345556,#345547,#345558,.T.); +#345556 = VERTEX_POINT('',#345557); +#345557 = CARTESIAN_POINT('',(153.2,-89.0875,1.51)); +#345558 = LINE('',#345559,#345560); +#345559 = CARTESIAN_POINT('',(153.2,-89.0875,1.51)); +#345560 = VECTOR('',#345561,1.); +#345561 = DIRECTION('',(0.,0.,1.)); +#345562 = ORIENTED_EDGE('',*,*,#345563,.F.); +#345563 = EDGE_CURVE('',#345524,#345556,#345564,.T.); +#345564 = CIRCLE('',#345565,0.187498366229); +#345565 = AXIS2_PLACEMENT_3D('',#345566,#345567,#345568); +#345566 = CARTESIAN_POINT('',(153.01250163377,-89.08749836622,1.51)); +#345567 = DIRECTION('',(0.,0.,-1.)); +#345568 = DIRECTION('',(-8.713558582297E-06,0.999999999962,0.)); +#345569 = CYLINDRICAL_SURFACE('',#345570,0.187498366229); +#345570 = AXIS2_PLACEMENT_3D('',#345571,#345572,#345573); +#345571 = CARTESIAN_POINT('',(153.01250163377,-89.08749836622,1.51)); +#345572 = DIRECTION('',(0.,0.,-1.)); +#345573 = DIRECTION('',(-8.713558582297E-06,0.999999999962,0.)); +#345574 = ADVANCED_FACE('',(#345575),#345600,.T.); +#345575 = FACE_BOUND('',#345576,.T.); +#345576 = EDGE_LOOP('',(#345577,#345578,#345586,#345594)); +#345577 = ORIENTED_EDGE('',*,*,#345555,.T.); +#345578 = ORIENTED_EDGE('',*,*,#345579,.T.); +#345579 = EDGE_CURVE('',#345547,#345580,#345582,.T.); +#345580 = VERTEX_POINT('',#345581); +#345581 = CARTESIAN_POINT('',(153.2,-89.4625,1.55)); +#345582 = LINE('',#345583,#345584); +#345583 = CARTESIAN_POINT('',(153.2,-89.0875,1.55)); +#345584 = VECTOR('',#345585,1.); +#345585 = DIRECTION('',(0.,-1.,0.)); +#345586 = ORIENTED_EDGE('',*,*,#345587,.F.); +#345587 = EDGE_CURVE('',#345588,#345580,#345590,.T.); +#345588 = VERTEX_POINT('',#345589); +#345589 = CARTESIAN_POINT('',(153.2,-89.4625,1.51)); +#345590 = LINE('',#345591,#345592); +#345591 = CARTESIAN_POINT('',(153.2,-89.4625,1.51)); +#345592 = VECTOR('',#345593,1.); +#345593 = DIRECTION('',(0.,0.,1.)); +#345594 = ORIENTED_EDGE('',*,*,#345595,.F.); +#345595 = EDGE_CURVE('',#345556,#345588,#345596,.T.); +#345596 = LINE('',#345597,#345598); +#345597 = CARTESIAN_POINT('',(153.2,-89.0875,1.51)); +#345598 = VECTOR('',#345599,1.); +#345599 = DIRECTION('',(0.,-1.,0.)); +#345600 = PLANE('',#345601); +#345601 = AXIS2_PLACEMENT_3D('',#345602,#345603,#345604); +#345602 = CARTESIAN_POINT('',(153.2,-89.0875,1.51)); +#345603 = DIRECTION('',(1.,0.,-0.)); +#345604 = DIRECTION('',(0.,-1.,0.)); +#345605 = ADVANCED_FACE('',(#345606),#345633,.T.); +#345606 = FACE_BOUND('',#345607,.T.); +#345607 = EDGE_LOOP('',(#345608,#345609,#345618,#345626)); +#345608 = ORIENTED_EDGE('',*,*,#345587,.T.); +#345609 = ORIENTED_EDGE('',*,*,#345610,.T.); +#345610 = EDGE_CURVE('',#345580,#345611,#345613,.T.); +#345611 = VERTEX_POINT('',#345612); +#345612 = CARTESIAN_POINT('',(153.0125,-89.65,1.55)); +#345613 = CIRCLE('',#345614,0.187498366229); +#345614 = AXIS2_PLACEMENT_3D('',#345615,#345616,#345617); +#345615 = CARTESIAN_POINT('',(153.01250163377,-89.46250163377,1.55)); +#345616 = DIRECTION('',(0.,0.,-1.)); +#345617 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#345618 = ORIENTED_EDGE('',*,*,#345619,.F.); +#345619 = EDGE_CURVE('',#345620,#345611,#345622,.T.); +#345620 = VERTEX_POINT('',#345621); +#345621 = CARTESIAN_POINT('',(153.0125,-89.65,1.51)); +#345622 = LINE('',#345623,#345624); +#345623 = CARTESIAN_POINT('',(153.0125,-89.65,1.51)); +#345624 = VECTOR('',#345625,1.); +#345625 = DIRECTION('',(0.,0.,1.)); +#345626 = ORIENTED_EDGE('',*,*,#345627,.F.); +#345627 = EDGE_CURVE('',#345588,#345620,#345628,.T.); +#345628 = CIRCLE('',#345629,0.187498366229); +#345629 = AXIS2_PLACEMENT_3D('',#345630,#345631,#345632); +#345630 = CARTESIAN_POINT('',(153.01250163377,-89.46250163377,1.51)); +#345631 = DIRECTION('',(0.,0.,-1.)); +#345632 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#345633 = CYLINDRICAL_SURFACE('',#345634,0.187498366229); +#345634 = AXIS2_PLACEMENT_3D('',#345635,#345636,#345637); +#345635 = CARTESIAN_POINT('',(153.01250163377,-89.46250163377,1.51)); +#345636 = DIRECTION('',(0.,0.,-1.)); +#345637 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#345638 = ADVANCED_FACE('',(#345639),#345664,.T.); +#345639 = FACE_BOUND('',#345640,.T.); +#345640 = EDGE_LOOP('',(#345641,#345642,#345650,#345658)); +#345641 = ORIENTED_EDGE('',*,*,#345619,.T.); +#345642 = ORIENTED_EDGE('',*,*,#345643,.T.); +#345643 = EDGE_CURVE('',#345611,#345644,#345646,.T.); +#345644 = VERTEX_POINT('',#345645); +#345645 = CARTESIAN_POINT('',(151.5875,-89.65,1.55)); +#345646 = LINE('',#345647,#345648); +#345647 = CARTESIAN_POINT('',(153.0125,-89.65,1.55)); +#345648 = VECTOR('',#345649,1.); +#345649 = DIRECTION('',(-1.,0.,0.)); +#345650 = ORIENTED_EDGE('',*,*,#345651,.F.); +#345651 = EDGE_CURVE('',#345652,#345644,#345654,.T.); +#345652 = VERTEX_POINT('',#345653); +#345653 = CARTESIAN_POINT('',(151.5875,-89.65,1.51)); +#345654 = LINE('',#345655,#345656); +#345655 = CARTESIAN_POINT('',(151.5875,-89.65,1.51)); +#345656 = VECTOR('',#345657,1.); +#345657 = DIRECTION('',(0.,0.,1.)); +#345658 = ORIENTED_EDGE('',*,*,#345659,.F.); +#345659 = EDGE_CURVE('',#345620,#345652,#345660,.T.); +#345660 = LINE('',#345661,#345662); +#345661 = CARTESIAN_POINT('',(153.0125,-89.65,1.51)); +#345662 = VECTOR('',#345663,1.); +#345663 = DIRECTION('',(-1.,0.,0.)); +#345664 = PLANE('',#345665); +#345665 = AXIS2_PLACEMENT_3D('',#345666,#345667,#345668); +#345666 = CARTESIAN_POINT('',(153.0125,-89.65,1.51)); +#345667 = DIRECTION('',(0.,-1.,0.)); +#345668 = DIRECTION('',(-1.,0.,0.)); +#345669 = ADVANCED_FACE('',(#345670),#345697,.T.); +#345670 = FACE_BOUND('',#345671,.T.); +#345671 = EDGE_LOOP('',(#345672,#345673,#345682,#345690)); +#345672 = ORIENTED_EDGE('',*,*,#345651,.T.); +#345673 = ORIENTED_EDGE('',*,*,#345674,.T.); +#345674 = EDGE_CURVE('',#345644,#345675,#345677,.T.); +#345675 = VERTEX_POINT('',#345676); +#345676 = CARTESIAN_POINT('',(151.4,-89.4625,1.55)); +#345677 = CIRCLE('',#345678,0.187498366229); +#345678 = AXIS2_PLACEMENT_3D('',#345679,#345680,#345681); +#345679 = CARTESIAN_POINT('',(151.58749836622,-89.46250163377,1.55)); +#345680 = DIRECTION('',(0.,0.,-1.)); +#345681 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#345682 = ORIENTED_EDGE('',*,*,#345683,.F.); +#345683 = EDGE_CURVE('',#345684,#345675,#345686,.T.); +#345684 = VERTEX_POINT('',#345685); +#345685 = CARTESIAN_POINT('',(151.4,-89.4625,1.51)); +#345686 = LINE('',#345687,#345688); +#345687 = CARTESIAN_POINT('',(151.4,-89.4625,1.51)); +#345688 = VECTOR('',#345689,1.); +#345689 = DIRECTION('',(0.,0.,1.)); +#345690 = ORIENTED_EDGE('',*,*,#345691,.F.); +#345691 = EDGE_CURVE('',#345652,#345684,#345692,.T.); +#345692 = CIRCLE('',#345693,0.187498366229); +#345693 = AXIS2_PLACEMENT_3D('',#345694,#345695,#345696); +#345694 = CARTESIAN_POINT('',(151.58749836622,-89.46250163377,1.51)); +#345695 = DIRECTION('',(0.,0.,-1.)); +#345696 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#345697 = CYLINDRICAL_SURFACE('',#345698,0.187498366229); +#345698 = AXIS2_PLACEMENT_3D('',#345699,#345700,#345701); +#345699 = CARTESIAN_POINT('',(151.58749836622,-89.46250163377,1.51)); +#345700 = DIRECTION('',(0.,0.,-1.)); +#345701 = DIRECTION('',(8.713558582296E-06,-0.999999999962,0.)); +#345702 = ADVANCED_FACE('',(#345703),#345719,.T.); +#345703 = FACE_BOUND('',#345704,.T.); +#345704 = EDGE_LOOP('',(#345705,#345706,#345712,#345713)); +#345705 = ORIENTED_EDGE('',*,*,#345683,.T.); +#345706 = ORIENTED_EDGE('',*,*,#345707,.T.); +#345707 = EDGE_CURVE('',#345675,#345475,#345708,.T.); +#345708 = LINE('',#345709,#345710); +#345709 = CARTESIAN_POINT('',(151.4,-89.4625,1.55)); +#345710 = VECTOR('',#345711,1.); +#345711 = DIRECTION('',(0.,1.,0.)); +#345712 = ORIENTED_EDGE('',*,*,#345472,.F.); +#345713 = ORIENTED_EDGE('',*,*,#345714,.F.); +#345714 = EDGE_CURVE('',#345684,#345473,#345715,.T.); +#345715 = LINE('',#345716,#345717); +#345716 = CARTESIAN_POINT('',(151.4,-89.4625,1.51)); +#345717 = VECTOR('',#345718,1.); +#345718 = DIRECTION('',(0.,1.,0.)); +#345719 = PLANE('',#345720); +#345720 = AXIS2_PLACEMENT_3D('',#345721,#345722,#345723); +#345721 = CARTESIAN_POINT('',(151.4,-89.4625,1.51)); +#345722 = DIRECTION('',(-1.,0.,0.)); +#345723 = DIRECTION('',(0.,1.,0.)); +#345724 = ADVANCED_FACE('',(#345725),#345735,.F.); +#345725 = FACE_BOUND('',#345726,.T.); +#345726 = EDGE_LOOP('',(#345727,#345728,#345729,#345730,#345731,#345732, + #345733,#345734)); +#345727 = ORIENTED_EDGE('',*,*,#345499,.T.); +#345728 = ORIENTED_EDGE('',*,*,#345531,.T.); +#345729 = ORIENTED_EDGE('',*,*,#345563,.T.); +#345730 = ORIENTED_EDGE('',*,*,#345595,.T.); +#345731 = ORIENTED_EDGE('',*,*,#345627,.T.); +#345732 = ORIENTED_EDGE('',*,*,#345659,.T.); +#345733 = ORIENTED_EDGE('',*,*,#345691,.T.); +#345734 = ORIENTED_EDGE('',*,*,#345714,.T.); +#345735 = PLANE('',#345736); +#345736 = AXIS2_PLACEMENT_3D('',#345737,#345738,#345739); +#345737 = CARTESIAN_POINT('',(0.,0.,1.51)); +#345738 = DIRECTION('',(0.,0.,1.)); +#345739 = DIRECTION('',(1.,0.,-0.)); +#345740 = ADVANCED_FACE('',(#345741),#345751,.T.); +#345741 = FACE_BOUND('',#345742,.F.); +#345742 = EDGE_LOOP('',(#345743,#345744,#345745,#345746,#345747,#345748, + #345749,#345750)); +#345743 = ORIENTED_EDGE('',*,*,#345482,.T.); +#345744 = ORIENTED_EDGE('',*,*,#345515,.T.); +#345745 = ORIENTED_EDGE('',*,*,#345546,.T.); +#345746 = ORIENTED_EDGE('',*,*,#345579,.T.); +#345747 = ORIENTED_EDGE('',*,*,#345610,.T.); +#345748 = ORIENTED_EDGE('',*,*,#345643,.T.); +#345749 = ORIENTED_EDGE('',*,*,#345674,.T.); +#345750 = ORIENTED_EDGE('',*,*,#345707,.T.); +#345751 = PLANE('',#345752); +#345752 = AXIS2_PLACEMENT_3D('',#345753,#345754,#345755); +#345753 = CARTESIAN_POINT('',(0.,0.,1.55)); +#345754 = DIRECTION('',(0.,0.,1.)); +#345755 = DIRECTION('',(1.,0.,-0.)); +#345756 = MANIFOLD_SOLID_BREP('',#345757); +#345757 = CLOSED_SHELL('',(#345758,#345798,#345829,#345860,#345882, + #345894)); +#345758 = ADVANCED_FACE('',(#345759),#345793,.T.); +#345759 = FACE_BOUND('',#345760,.T.); +#345760 = EDGE_LOOP('',(#345761,#345771,#345779,#345787)); +#345761 = ORIENTED_EDGE('',*,*,#345762,.T.); +#345762 = EDGE_CURVE('',#345763,#345765,#345767,.T.); +#345763 = VERTEX_POINT('',#345764); +#345764 = CARTESIAN_POINT('',(128.5,-68.91,1.51)); +#345765 = VERTEX_POINT('',#345766); +#345766 = CARTESIAN_POINT('',(128.5,-68.91,1.55)); +#345767 = LINE('',#345768,#345769); +#345768 = CARTESIAN_POINT('',(128.5,-68.91,1.51)); +#345769 = VECTOR('',#345770,1.); +#345770 = DIRECTION('',(0.,0.,1.)); +#345771 = ORIENTED_EDGE('',*,*,#345772,.T.); +#345772 = EDGE_CURVE('',#345765,#345773,#345775,.T.); +#345773 = VERTEX_POINT('',#345774); +#345774 = CARTESIAN_POINT('',(128.5,-68.01,1.55)); +#345775 = LINE('',#345776,#345777); +#345776 = CARTESIAN_POINT('',(128.5,-68.91,1.55)); +#345777 = VECTOR('',#345778,1.); +#345778 = DIRECTION('',(0.,1.,0.)); +#345779 = ORIENTED_EDGE('',*,*,#345780,.F.); +#345780 = EDGE_CURVE('',#345781,#345773,#345783,.T.); +#345781 = VERTEX_POINT('',#345782); +#345782 = CARTESIAN_POINT('',(128.5,-68.01,1.51)); +#345783 = LINE('',#345784,#345785); +#345784 = CARTESIAN_POINT('',(128.5,-68.01,1.51)); +#345785 = VECTOR('',#345786,1.); +#345786 = DIRECTION('',(0.,0.,1.)); +#345787 = ORIENTED_EDGE('',*,*,#345788,.F.); +#345788 = EDGE_CURVE('',#345763,#345781,#345789,.T.); +#345789 = LINE('',#345790,#345791); +#345790 = CARTESIAN_POINT('',(128.5,-68.91,1.51)); +#345791 = VECTOR('',#345792,1.); +#345792 = DIRECTION('',(0.,1.,0.)); +#345793 = PLANE('',#345794); +#345794 = AXIS2_PLACEMENT_3D('',#345795,#345796,#345797); +#345795 = CARTESIAN_POINT('',(128.5,-68.91,1.51)); +#345796 = DIRECTION('',(-1.,0.,0.)); +#345797 = DIRECTION('',(0.,1.,0.)); +#345798 = ADVANCED_FACE('',(#345799),#345824,.T.); +#345799 = FACE_BOUND('',#345800,.T.); +#345800 = EDGE_LOOP('',(#345801,#345802,#345810,#345818)); +#345801 = ORIENTED_EDGE('',*,*,#345780,.T.); +#345802 = ORIENTED_EDGE('',*,*,#345803,.T.); +#345803 = EDGE_CURVE('',#345773,#345804,#345806,.T.); +#345804 = VERTEX_POINT('',#345805); +#345805 = CARTESIAN_POINT('',(130.,-68.01,1.55)); +#345806 = LINE('',#345807,#345808); +#345807 = CARTESIAN_POINT('',(128.5,-68.01,1.55)); +#345808 = VECTOR('',#345809,1.); +#345809 = DIRECTION('',(1.,0.,0.)); +#345810 = ORIENTED_EDGE('',*,*,#345811,.F.); +#345811 = EDGE_CURVE('',#345812,#345804,#345814,.T.); +#345812 = VERTEX_POINT('',#345813); +#345813 = CARTESIAN_POINT('',(130.,-68.01,1.51)); +#345814 = LINE('',#345815,#345816); +#345815 = CARTESIAN_POINT('',(130.,-68.01,1.51)); +#345816 = VECTOR('',#345817,1.); +#345817 = DIRECTION('',(0.,0.,1.)); +#345818 = ORIENTED_EDGE('',*,*,#345819,.F.); +#345819 = EDGE_CURVE('',#345781,#345812,#345820,.T.); +#345820 = LINE('',#345821,#345822); +#345821 = CARTESIAN_POINT('',(128.5,-68.01,1.51)); +#345822 = VECTOR('',#345823,1.); +#345823 = DIRECTION('',(1.,0.,0.)); +#345824 = PLANE('',#345825); +#345825 = AXIS2_PLACEMENT_3D('',#345826,#345827,#345828); +#345826 = CARTESIAN_POINT('',(128.5,-68.01,1.51)); +#345827 = DIRECTION('',(0.,1.,0.)); +#345828 = DIRECTION('',(1.,0.,0.)); +#345829 = ADVANCED_FACE('',(#345830),#345855,.T.); +#345830 = FACE_BOUND('',#345831,.T.); +#345831 = EDGE_LOOP('',(#345832,#345833,#345841,#345849)); +#345832 = ORIENTED_EDGE('',*,*,#345811,.T.); +#345833 = ORIENTED_EDGE('',*,*,#345834,.T.); +#345834 = EDGE_CURVE('',#345804,#345835,#345837,.T.); +#345835 = VERTEX_POINT('',#345836); +#345836 = CARTESIAN_POINT('',(130.,-68.91,1.55)); +#345837 = LINE('',#345838,#345839); +#345838 = CARTESIAN_POINT('',(130.,-68.01,1.55)); +#345839 = VECTOR('',#345840,1.); +#345840 = DIRECTION('',(0.,-1.,0.)); +#345841 = ORIENTED_EDGE('',*,*,#345842,.F.); +#345842 = EDGE_CURVE('',#345843,#345835,#345845,.T.); +#345843 = VERTEX_POINT('',#345844); +#345844 = CARTESIAN_POINT('',(130.,-68.91,1.51)); +#345845 = LINE('',#345846,#345847); +#345846 = CARTESIAN_POINT('',(130.,-68.91,1.51)); +#345847 = VECTOR('',#345848,1.); +#345848 = DIRECTION('',(0.,0.,1.)); +#345849 = ORIENTED_EDGE('',*,*,#345850,.F.); +#345850 = EDGE_CURVE('',#345812,#345843,#345851,.T.); +#345851 = LINE('',#345852,#345853); +#345852 = CARTESIAN_POINT('',(130.,-68.01,1.51)); +#345853 = VECTOR('',#345854,1.); +#345854 = DIRECTION('',(0.,-1.,0.)); +#345855 = PLANE('',#345856); +#345856 = AXIS2_PLACEMENT_3D('',#345857,#345858,#345859); +#345857 = CARTESIAN_POINT('',(130.,-68.01,1.51)); +#345858 = DIRECTION('',(1.,0.,-0.)); +#345859 = DIRECTION('',(0.,-1.,0.)); +#345860 = ADVANCED_FACE('',(#345861),#345877,.T.); +#345861 = FACE_BOUND('',#345862,.T.); +#345862 = EDGE_LOOP('',(#345863,#345864,#345870,#345871)); +#345863 = ORIENTED_EDGE('',*,*,#345842,.T.); +#345864 = ORIENTED_EDGE('',*,*,#345865,.T.); +#345865 = EDGE_CURVE('',#345835,#345765,#345866,.T.); +#345866 = LINE('',#345867,#345868); +#345867 = CARTESIAN_POINT('',(130.,-68.91,1.55)); +#345868 = VECTOR('',#345869,1.); +#345869 = DIRECTION('',(-1.,0.,0.)); +#345870 = ORIENTED_EDGE('',*,*,#345762,.F.); +#345871 = ORIENTED_EDGE('',*,*,#345872,.F.); +#345872 = EDGE_CURVE('',#345843,#345763,#345873,.T.); +#345873 = LINE('',#345874,#345875); +#345874 = CARTESIAN_POINT('',(130.,-68.91,1.51)); +#345875 = VECTOR('',#345876,1.); +#345876 = DIRECTION('',(-1.,0.,0.)); +#345877 = PLANE('',#345878); +#345878 = AXIS2_PLACEMENT_3D('',#345879,#345880,#345881); +#345879 = CARTESIAN_POINT('',(130.,-68.91,1.51)); +#345880 = DIRECTION('',(0.,-1.,0.)); +#345881 = DIRECTION('',(-1.,0.,0.)); +#345882 = ADVANCED_FACE('',(#345883),#345889,.F.); +#345883 = FACE_BOUND('',#345884,.T.); +#345884 = EDGE_LOOP('',(#345885,#345886,#345887,#345888)); +#345885 = ORIENTED_EDGE('',*,*,#345788,.T.); +#345886 = ORIENTED_EDGE('',*,*,#345819,.T.); +#345887 = ORIENTED_EDGE('',*,*,#345850,.T.); +#345888 = ORIENTED_EDGE('',*,*,#345872,.T.); +#345889 = PLANE('',#345890); +#345890 = AXIS2_PLACEMENT_3D('',#345891,#345892,#345893); +#345891 = CARTESIAN_POINT('',(0.,0.,1.51)); +#345892 = DIRECTION('',(0.,0.,1.)); +#345893 = DIRECTION('',(1.,0.,-0.)); +#345894 = ADVANCED_FACE('',(#345895),#345901,.T.); +#345895 = FACE_BOUND('',#345896,.F.); +#345896 = EDGE_LOOP('',(#345897,#345898,#345899,#345900)); +#345897 = ORIENTED_EDGE('',*,*,#345772,.T.); +#345898 = ORIENTED_EDGE('',*,*,#345803,.T.); +#345899 = ORIENTED_EDGE('',*,*,#345834,.T.); +#345900 = ORIENTED_EDGE('',*,*,#345865,.T.); +#345901 = PLANE('',#345902); +#345902 = AXIS2_PLACEMENT_3D('',#345903,#345904,#345905); +#345903 = CARTESIAN_POINT('',(0.,0.,1.55)); +#345904 = DIRECTION('',(0.,0.,1.)); +#345905 = DIRECTION('',(1.,0.,-0.)); +#345906 = MANIFOLD_SOLID_BREP('',#345907); +#345907 = CLOSED_SHELL('',(#345908,#345950,#345981,#346014,#346045, + #346078,#346109,#346142,#346164,#346180)); +#345908 = ADVANCED_FACE('',(#345909),#345945,.T.); +#345909 = FACE_BOUND('',#345910,.F.); +#345910 = EDGE_LOOP('',(#345911,#345921,#345930,#345938)); +#345911 = ORIENTED_EDGE('',*,*,#345912,.T.); +#345912 = EDGE_CURVE('',#345913,#345915,#345917,.T.); +#345913 = VERTEX_POINT('',#345914); +#345914 = CARTESIAN_POINT('',(136.1625,-70.05,0.)); +#345915 = VERTEX_POINT('',#345916); +#345916 = CARTESIAN_POINT('',(136.1625,-70.05,-4.E-02)); +#345917 = LINE('',#345918,#345919); +#345918 = CARTESIAN_POINT('',(136.1625,-70.05,0.)); +#345919 = VECTOR('',#345920,1.); +#345920 = DIRECTION('',(0.,0.,-1.)); +#345921 = ORIENTED_EDGE('',*,*,#345922,.T.); +#345922 = EDGE_CURVE('',#345915,#345923,#345925,.T.); +#345923 = VERTEX_POINT('',#345924); +#345924 = CARTESIAN_POINT('',(136.3125,-69.9,-4.E-02)); +#345925 = CIRCLE('',#345926,0.150000058649); +#345926 = AXIS2_PLACEMENT_3D('',#345927,#345928,#345929); +#345927 = CARTESIAN_POINT('',(136.31250005864,-70.05000005864,-4.E-02)); +#345928 = DIRECTION('',(0.,0.,-1.)); +#345929 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#345930 = ORIENTED_EDGE('',*,*,#345931,.F.); +#345931 = EDGE_CURVE('',#345932,#345923,#345934,.T.); +#345932 = VERTEX_POINT('',#345933); +#345933 = CARTESIAN_POINT('',(136.3125,-69.9,0.)); +#345934 = LINE('',#345935,#345936); +#345935 = CARTESIAN_POINT('',(136.3125,-69.9,0.)); +#345936 = VECTOR('',#345937,1.); +#345937 = DIRECTION('',(0.,0.,-1.)); +#345938 = ORIENTED_EDGE('',*,*,#345939,.F.); +#345939 = EDGE_CURVE('',#345913,#345932,#345940,.T.); +#345940 = CIRCLE('',#345941,0.150000058649); +#345941 = AXIS2_PLACEMENT_3D('',#345942,#345943,#345944); +#345942 = CARTESIAN_POINT('',(136.31250005864,-70.05000005864,0.)); +#345943 = DIRECTION('',(0.,0.,-1.)); +#345944 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#345945 = CYLINDRICAL_SURFACE('',#345946,0.150000058649); +#345946 = AXIS2_PLACEMENT_3D('',#345947,#345948,#345949); +#345947 = CARTESIAN_POINT('',(136.31250005864,-70.05000005864,0.)); +#345948 = DIRECTION('',(-0.,-0.,1.)); +#345949 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#345950 = ADVANCED_FACE('',(#345951),#345976,.F.); +#345951 = FACE_BOUND('',#345952,.F.); +#345952 = EDGE_LOOP('',(#345953,#345954,#345962,#345970)); +#345953 = ORIENTED_EDGE('',*,*,#345931,.T.); +#345954 = ORIENTED_EDGE('',*,*,#345955,.T.); +#345955 = EDGE_CURVE('',#345923,#345956,#345958,.T.); +#345956 = VERTEX_POINT('',#345957); +#345957 = CARTESIAN_POINT('',(137.4875,-69.9,-4.E-02)); +#345958 = LINE('',#345959,#345960); +#345959 = CARTESIAN_POINT('',(136.3125,-69.9,-4.E-02)); +#345960 = VECTOR('',#345961,1.); +#345961 = DIRECTION('',(1.,0.,0.)); +#345962 = ORIENTED_EDGE('',*,*,#345963,.F.); +#345963 = EDGE_CURVE('',#345964,#345956,#345966,.T.); +#345964 = VERTEX_POINT('',#345965); +#345965 = CARTESIAN_POINT('',(137.4875,-69.9,0.)); +#345966 = LINE('',#345967,#345968); +#345967 = CARTESIAN_POINT('',(137.4875,-69.9,0.)); +#345968 = VECTOR('',#345969,1.); +#345969 = DIRECTION('',(0.,0.,-1.)); +#345970 = ORIENTED_EDGE('',*,*,#345971,.F.); +#345971 = EDGE_CURVE('',#345932,#345964,#345972,.T.); +#345972 = LINE('',#345973,#345974); +#345973 = CARTESIAN_POINT('',(136.3125,-69.9,0.)); +#345974 = VECTOR('',#345975,1.); +#345975 = DIRECTION('',(1.,0.,0.)); +#345976 = PLANE('',#345977); +#345977 = AXIS2_PLACEMENT_3D('',#345978,#345979,#345980); +#345978 = CARTESIAN_POINT('',(136.3125,-69.9,0.)); +#345979 = DIRECTION('',(0.,-1.,0.)); +#345980 = DIRECTION('',(1.,0.,0.)); +#345981 = ADVANCED_FACE('',(#345982),#346009,.T.); +#345982 = FACE_BOUND('',#345983,.F.); +#345983 = EDGE_LOOP('',(#345984,#345985,#345994,#346002)); +#345984 = ORIENTED_EDGE('',*,*,#345963,.T.); +#345985 = ORIENTED_EDGE('',*,*,#345986,.T.); +#345986 = EDGE_CURVE('',#345956,#345987,#345989,.T.); +#345987 = VERTEX_POINT('',#345988); +#345988 = CARTESIAN_POINT('',(137.6375,-70.05,-4.E-02)); +#345989 = CIRCLE('',#345990,0.150000058649); +#345990 = AXIS2_PLACEMENT_3D('',#345991,#345992,#345993); +#345991 = CARTESIAN_POINT('',(137.48749994135,-70.05000005864,-4.E-02)); +#345992 = DIRECTION('',(0.,0.,-1.)); +#345993 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#345994 = ORIENTED_EDGE('',*,*,#345995,.F.); +#345995 = EDGE_CURVE('',#345996,#345987,#345998,.T.); +#345996 = VERTEX_POINT('',#345997); +#345997 = CARTESIAN_POINT('',(137.6375,-70.05,0.)); +#345998 = LINE('',#345999,#346000); +#345999 = CARTESIAN_POINT('',(137.6375,-70.05,0.)); +#346000 = VECTOR('',#346001,1.); +#346001 = DIRECTION('',(0.,0.,-1.)); +#346002 = ORIENTED_EDGE('',*,*,#346003,.F.); +#346003 = EDGE_CURVE('',#345964,#345996,#346004,.T.); +#346004 = CIRCLE('',#346005,0.150000058649); +#346005 = AXIS2_PLACEMENT_3D('',#346006,#346007,#346008); +#346006 = CARTESIAN_POINT('',(137.48749994135,-70.05000005864,0.)); +#346007 = DIRECTION('',(0.,0.,-1.)); +#346008 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#346009 = CYLINDRICAL_SURFACE('',#346010,0.150000058649); +#346010 = AXIS2_PLACEMENT_3D('',#346011,#346012,#346013); +#346011 = CARTESIAN_POINT('',(137.48749994135,-70.05000005864,0.)); +#346012 = DIRECTION('',(-0.,-0.,1.)); +#346013 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#346014 = ADVANCED_FACE('',(#346015),#346040,.F.); +#346015 = FACE_BOUND('',#346016,.F.); +#346016 = EDGE_LOOP('',(#346017,#346018,#346026,#346034)); +#346017 = ORIENTED_EDGE('',*,*,#345995,.T.); +#346018 = ORIENTED_EDGE('',*,*,#346019,.T.); +#346019 = EDGE_CURVE('',#345987,#346020,#346022,.T.); +#346020 = VERTEX_POINT('',#346021); +#346021 = CARTESIAN_POINT('',(137.6375,-70.35,-4.E-02)); +#346022 = LINE('',#346023,#346024); +#346023 = CARTESIAN_POINT('',(137.6375,-70.05,-4.E-02)); +#346024 = VECTOR('',#346025,1.); +#346025 = DIRECTION('',(0.,-1.,0.)); +#346026 = ORIENTED_EDGE('',*,*,#346027,.F.); +#346027 = EDGE_CURVE('',#346028,#346020,#346030,.T.); +#346028 = VERTEX_POINT('',#346029); +#346029 = CARTESIAN_POINT('',(137.6375,-70.35,0.)); +#346030 = LINE('',#346031,#346032); +#346031 = CARTESIAN_POINT('',(137.6375,-70.35,0.)); +#346032 = VECTOR('',#346033,1.); +#346033 = DIRECTION('',(0.,0.,-1.)); +#346034 = ORIENTED_EDGE('',*,*,#346035,.F.); +#346035 = EDGE_CURVE('',#345996,#346028,#346036,.T.); +#346036 = LINE('',#346037,#346038); +#346037 = CARTESIAN_POINT('',(137.6375,-70.05,0.)); +#346038 = VECTOR('',#346039,1.); +#346039 = DIRECTION('',(0.,-1.,0.)); +#346040 = PLANE('',#346041); +#346041 = AXIS2_PLACEMENT_3D('',#346042,#346043,#346044); +#346042 = CARTESIAN_POINT('',(137.6375,-70.05,0.)); +#346043 = DIRECTION('',(-1.,-0.,-0.)); +#346044 = DIRECTION('',(0.,-1.,0.)); +#346045 = ADVANCED_FACE('',(#346046),#346073,.T.); +#346046 = FACE_BOUND('',#346047,.F.); +#346047 = EDGE_LOOP('',(#346048,#346049,#346058,#346066)); +#346048 = ORIENTED_EDGE('',*,*,#346027,.T.); +#346049 = ORIENTED_EDGE('',*,*,#346050,.T.); +#346050 = EDGE_CURVE('',#346020,#346051,#346053,.T.); +#346051 = VERTEX_POINT('',#346052); +#346052 = CARTESIAN_POINT('',(137.4875,-70.5,-4.E-02)); +#346053 = CIRCLE('',#346054,0.150000058649); +#346054 = AXIS2_PLACEMENT_3D('',#346055,#346056,#346057); +#346055 = CARTESIAN_POINT('',(137.48749994135,-70.34999994135,-4.E-02)); +#346056 = DIRECTION('',(0.,0.,-1.)); +#346057 = DIRECTION('',(1.,-3.909950300201E-07,0.)); +#346058 = ORIENTED_EDGE('',*,*,#346059,.F.); +#346059 = EDGE_CURVE('',#346060,#346051,#346062,.T.); +#346060 = VERTEX_POINT('',#346061); +#346061 = CARTESIAN_POINT('',(137.4875,-70.5,0.)); +#346062 = LINE('',#346063,#346064); +#346063 = CARTESIAN_POINT('',(137.4875,-70.5,0.)); +#346064 = VECTOR('',#346065,1.); +#346065 = DIRECTION('',(0.,0.,-1.)); +#346066 = ORIENTED_EDGE('',*,*,#346067,.F.); +#346067 = EDGE_CURVE('',#346028,#346060,#346068,.T.); +#346068 = CIRCLE('',#346069,0.150000058649); +#346069 = AXIS2_PLACEMENT_3D('',#346070,#346071,#346072); +#346070 = CARTESIAN_POINT('',(137.48749994135,-70.34999994135,0.)); +#346071 = DIRECTION('',(0.,0.,-1.)); +#346072 = DIRECTION('',(1.,-3.909950300201E-07,0.)); +#346073 = CYLINDRICAL_SURFACE('',#346074,0.150000058649); +#346074 = AXIS2_PLACEMENT_3D('',#346075,#346076,#346077); +#346075 = CARTESIAN_POINT('',(137.48749994135,-70.34999994135,0.)); +#346076 = DIRECTION('',(-0.,-0.,1.)); +#346077 = DIRECTION('',(1.,-3.909950300201E-07,0.)); +#346078 = ADVANCED_FACE('',(#346079),#346104,.F.); +#346079 = FACE_BOUND('',#346080,.F.); +#346080 = EDGE_LOOP('',(#346081,#346082,#346090,#346098)); +#346081 = ORIENTED_EDGE('',*,*,#346059,.T.); +#346082 = ORIENTED_EDGE('',*,*,#346083,.T.); +#346083 = EDGE_CURVE('',#346051,#346084,#346086,.T.); +#346084 = VERTEX_POINT('',#346085); +#346085 = CARTESIAN_POINT('',(136.3125,-70.5,-4.E-02)); +#346086 = LINE('',#346087,#346088); +#346087 = CARTESIAN_POINT('',(137.4875,-70.5,-4.E-02)); +#346088 = VECTOR('',#346089,1.); +#346089 = DIRECTION('',(-1.,0.,0.)); +#346090 = ORIENTED_EDGE('',*,*,#346091,.F.); +#346091 = EDGE_CURVE('',#346092,#346084,#346094,.T.); +#346092 = VERTEX_POINT('',#346093); +#346093 = CARTESIAN_POINT('',(136.3125,-70.5,0.)); +#346094 = LINE('',#346095,#346096); +#346095 = CARTESIAN_POINT('',(136.3125,-70.5,0.)); +#346096 = VECTOR('',#346097,1.); +#346097 = DIRECTION('',(0.,0.,-1.)); +#346098 = ORIENTED_EDGE('',*,*,#346099,.F.); +#346099 = EDGE_CURVE('',#346060,#346092,#346100,.T.); +#346100 = LINE('',#346101,#346102); +#346101 = CARTESIAN_POINT('',(137.4875,-70.5,0.)); +#346102 = VECTOR('',#346103,1.); +#346103 = DIRECTION('',(-1.,0.,0.)); +#346104 = PLANE('',#346105); +#346105 = AXIS2_PLACEMENT_3D('',#346106,#346107,#346108); +#346106 = CARTESIAN_POINT('',(137.4875,-70.5,0.)); +#346107 = DIRECTION('',(0.,1.,0.)); +#346108 = DIRECTION('',(-1.,0.,0.)); +#346109 = ADVANCED_FACE('',(#346110),#346137,.T.); +#346110 = FACE_BOUND('',#346111,.F.); +#346111 = EDGE_LOOP('',(#346112,#346113,#346122,#346130)); +#346112 = ORIENTED_EDGE('',*,*,#346091,.T.); +#346113 = ORIENTED_EDGE('',*,*,#346114,.T.); +#346114 = EDGE_CURVE('',#346084,#346115,#346117,.T.); +#346115 = VERTEX_POINT('',#346116); +#346116 = CARTESIAN_POINT('',(136.1625,-70.35,-4.E-02)); +#346117 = CIRCLE('',#346118,0.150000058649); +#346118 = AXIS2_PLACEMENT_3D('',#346119,#346120,#346121); +#346119 = CARTESIAN_POINT('',(136.31250005864,-70.34999994135,-4.E-02)); +#346120 = DIRECTION('',(0.,0.,-1.)); +#346121 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#346122 = ORIENTED_EDGE('',*,*,#346123,.F.); +#346123 = EDGE_CURVE('',#346124,#346115,#346126,.T.); +#346124 = VERTEX_POINT('',#346125); +#346125 = CARTESIAN_POINT('',(136.1625,-70.35,0.)); +#346126 = LINE('',#346127,#346128); +#346127 = CARTESIAN_POINT('',(136.1625,-70.35,0.)); +#346128 = VECTOR('',#346129,1.); +#346129 = DIRECTION('',(0.,0.,-1.)); +#346130 = ORIENTED_EDGE('',*,*,#346131,.F.); +#346131 = EDGE_CURVE('',#346092,#346124,#346132,.T.); +#346132 = CIRCLE('',#346133,0.150000058649); +#346133 = AXIS2_PLACEMENT_3D('',#346134,#346135,#346136); +#346134 = CARTESIAN_POINT('',(136.31250005864,-70.34999994135,0.)); +#346135 = DIRECTION('',(0.,0.,-1.)); +#346136 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#346137 = CYLINDRICAL_SURFACE('',#346138,0.150000058649); +#346138 = AXIS2_PLACEMENT_3D('',#346139,#346140,#346141); +#346139 = CARTESIAN_POINT('',(136.31250005864,-70.34999994135,0.)); +#346140 = DIRECTION('',(-0.,-0.,1.)); +#346141 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#346142 = ADVANCED_FACE('',(#346143),#346159,.F.); +#346143 = FACE_BOUND('',#346144,.F.); +#346144 = EDGE_LOOP('',(#346145,#346146,#346152,#346153)); +#346145 = ORIENTED_EDGE('',*,*,#346123,.T.); +#346146 = ORIENTED_EDGE('',*,*,#346147,.T.); +#346147 = EDGE_CURVE('',#346115,#345915,#346148,.T.); +#346148 = LINE('',#346149,#346150); +#346149 = CARTESIAN_POINT('',(136.1625,-70.35,-4.E-02)); +#346150 = VECTOR('',#346151,1.); +#346151 = DIRECTION('',(0.,1.,0.)); +#346152 = ORIENTED_EDGE('',*,*,#345912,.F.); +#346153 = ORIENTED_EDGE('',*,*,#346154,.F.); +#346154 = EDGE_CURVE('',#346124,#345913,#346155,.T.); +#346155 = LINE('',#346156,#346157); +#346156 = CARTESIAN_POINT('',(136.1625,-70.35,0.)); +#346157 = VECTOR('',#346158,1.); +#346158 = DIRECTION('',(0.,1.,0.)); +#346159 = PLANE('',#346160); +#346160 = AXIS2_PLACEMENT_3D('',#346161,#346162,#346163); +#346161 = CARTESIAN_POINT('',(136.1625,-70.35,0.)); +#346162 = DIRECTION('',(1.,-0.,0.)); +#346163 = DIRECTION('',(0.,1.,0.)); +#346164 = ADVANCED_FACE('',(#346165),#346175,.F.); +#346165 = FACE_BOUND('',#346166,.F.); +#346166 = EDGE_LOOP('',(#346167,#346168,#346169,#346170,#346171,#346172, + #346173,#346174)); +#346167 = ORIENTED_EDGE('',*,*,#345939,.T.); +#346168 = ORIENTED_EDGE('',*,*,#345971,.T.); +#346169 = ORIENTED_EDGE('',*,*,#346003,.T.); +#346170 = ORIENTED_EDGE('',*,*,#346035,.T.); +#346171 = ORIENTED_EDGE('',*,*,#346067,.T.); +#346172 = ORIENTED_EDGE('',*,*,#346099,.T.); +#346173 = ORIENTED_EDGE('',*,*,#346131,.T.); +#346174 = ORIENTED_EDGE('',*,*,#346154,.T.); +#346175 = PLANE('',#346176); +#346176 = AXIS2_PLACEMENT_3D('',#346177,#346178,#346179); +#346177 = CARTESIAN_POINT('',(0.,0.,0.)); +#346178 = DIRECTION('',(-0.,-0.,-1.)); +#346179 = DIRECTION('',(-1.,0.,0.)); +#346180 = ADVANCED_FACE('',(#346181),#346191,.T.); +#346181 = FACE_BOUND('',#346182,.T.); +#346182 = EDGE_LOOP('',(#346183,#346184,#346185,#346186,#346187,#346188, + #346189,#346190)); +#346183 = ORIENTED_EDGE('',*,*,#345922,.T.); +#346184 = ORIENTED_EDGE('',*,*,#345955,.T.); +#346185 = ORIENTED_EDGE('',*,*,#345986,.T.); +#346186 = ORIENTED_EDGE('',*,*,#346019,.T.); +#346187 = ORIENTED_EDGE('',*,*,#346050,.T.); +#346188 = ORIENTED_EDGE('',*,*,#346083,.T.); +#346189 = ORIENTED_EDGE('',*,*,#346114,.T.); +#346190 = ORIENTED_EDGE('',*,*,#346147,.T.); +#346191 = PLANE('',#346192); +#346192 = AXIS2_PLACEMENT_3D('',#346193,#346194,#346195); +#346193 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#346194 = DIRECTION('',(-0.,-0.,-1.)); +#346195 = DIRECTION('',(-1.,0.,0.)); +#346196 = MANIFOLD_SOLID_BREP('',#346197); +#346197 = CLOSED_SHELL('',(#346198,#346238,#346269,#346300,#346322, + #346334)); +#346198 = ADVANCED_FACE('',(#346199),#346233,.T.); +#346199 = FACE_BOUND('',#346200,.T.); +#346200 = EDGE_LOOP('',(#346201,#346211,#346219,#346227)); +#346201 = ORIENTED_EDGE('',*,*,#346202,.T.); +#346202 = EDGE_CURVE('',#346203,#346205,#346207,.T.); +#346203 = VERTEX_POINT('',#346204); +#346204 = CARTESIAN_POINT('',(140.725,-83.16,1.51)); +#346205 = VERTEX_POINT('',#346206); +#346206 = CARTESIAN_POINT('',(140.725,-83.16,1.55)); +#346207 = LINE('',#346208,#346209); +#346208 = CARTESIAN_POINT('',(140.725,-83.16,1.51)); +#346209 = VECTOR('',#346210,1.); +#346210 = DIRECTION('',(0.,0.,1.)); +#346211 = ORIENTED_EDGE('',*,*,#346212,.T.); +#346212 = EDGE_CURVE('',#346205,#346213,#346215,.T.); +#346213 = VERTEX_POINT('',#346214); +#346214 = CARTESIAN_POINT('',(140.725,-81.66,1.55)); +#346215 = LINE('',#346216,#346217); +#346216 = CARTESIAN_POINT('',(140.725,-83.16,1.55)); +#346217 = VECTOR('',#346218,1.); +#346218 = DIRECTION('',(0.,1.,0.)); +#346219 = ORIENTED_EDGE('',*,*,#346220,.F.); +#346220 = EDGE_CURVE('',#346221,#346213,#346223,.T.); +#346221 = VERTEX_POINT('',#346222); +#346222 = CARTESIAN_POINT('',(140.725,-81.66,1.51)); +#346223 = LINE('',#346224,#346225); +#346224 = CARTESIAN_POINT('',(140.725,-81.66,1.51)); +#346225 = VECTOR('',#346226,1.); +#346226 = DIRECTION('',(0.,0.,1.)); +#346227 = ORIENTED_EDGE('',*,*,#346228,.F.); +#346228 = EDGE_CURVE('',#346203,#346221,#346229,.T.); +#346229 = LINE('',#346230,#346231); +#346230 = CARTESIAN_POINT('',(140.725,-83.16,1.51)); +#346231 = VECTOR('',#346232,1.); +#346232 = DIRECTION('',(0.,1.,0.)); +#346233 = PLANE('',#346234); +#346234 = AXIS2_PLACEMENT_3D('',#346235,#346236,#346237); +#346235 = CARTESIAN_POINT('',(140.725,-83.16,1.51)); +#346236 = DIRECTION('',(-1.,0.,0.)); +#346237 = DIRECTION('',(0.,1.,0.)); +#346238 = ADVANCED_FACE('',(#346239),#346264,.T.); +#346239 = FACE_BOUND('',#346240,.T.); +#346240 = EDGE_LOOP('',(#346241,#346242,#346250,#346258)); +#346241 = ORIENTED_EDGE('',*,*,#346220,.T.); +#346242 = ORIENTED_EDGE('',*,*,#346243,.T.); +#346243 = EDGE_CURVE('',#346213,#346244,#346246,.T.); +#346244 = VERTEX_POINT('',#346245); +#346245 = CARTESIAN_POINT('',(141.625,-81.66,1.55)); +#346246 = LINE('',#346247,#346248); +#346247 = CARTESIAN_POINT('',(140.725,-81.66,1.55)); +#346248 = VECTOR('',#346249,1.); +#346249 = DIRECTION('',(1.,0.,0.)); +#346250 = ORIENTED_EDGE('',*,*,#346251,.F.); +#346251 = EDGE_CURVE('',#346252,#346244,#346254,.T.); +#346252 = VERTEX_POINT('',#346253); +#346253 = CARTESIAN_POINT('',(141.625,-81.66,1.51)); +#346254 = LINE('',#346255,#346256); +#346255 = CARTESIAN_POINT('',(141.625,-81.66,1.51)); +#346256 = VECTOR('',#346257,1.); +#346257 = DIRECTION('',(0.,0.,1.)); +#346258 = ORIENTED_EDGE('',*,*,#346259,.F.); +#346259 = EDGE_CURVE('',#346221,#346252,#346260,.T.); +#346260 = LINE('',#346261,#346262); +#346261 = CARTESIAN_POINT('',(140.725,-81.66,1.51)); +#346262 = VECTOR('',#346263,1.); +#346263 = DIRECTION('',(1.,0.,0.)); +#346264 = PLANE('',#346265); +#346265 = AXIS2_PLACEMENT_3D('',#346266,#346267,#346268); +#346266 = CARTESIAN_POINT('',(140.725,-81.66,1.51)); +#346267 = DIRECTION('',(0.,1.,0.)); +#346268 = DIRECTION('',(1.,0.,0.)); +#346269 = ADVANCED_FACE('',(#346270),#346295,.T.); +#346270 = FACE_BOUND('',#346271,.T.); +#346271 = EDGE_LOOP('',(#346272,#346273,#346281,#346289)); +#346272 = ORIENTED_EDGE('',*,*,#346251,.T.); +#346273 = ORIENTED_EDGE('',*,*,#346274,.T.); +#346274 = EDGE_CURVE('',#346244,#346275,#346277,.T.); +#346275 = VERTEX_POINT('',#346276); +#346276 = CARTESIAN_POINT('',(141.625,-83.16,1.55)); +#346277 = LINE('',#346278,#346279); +#346278 = CARTESIAN_POINT('',(141.625,-81.66,1.55)); +#346279 = VECTOR('',#346280,1.); +#346280 = DIRECTION('',(0.,-1.,0.)); +#346281 = ORIENTED_EDGE('',*,*,#346282,.F.); +#346282 = EDGE_CURVE('',#346283,#346275,#346285,.T.); +#346283 = VERTEX_POINT('',#346284); +#346284 = CARTESIAN_POINT('',(141.625,-83.16,1.51)); +#346285 = LINE('',#346286,#346287); +#346286 = CARTESIAN_POINT('',(141.625,-83.16,1.51)); +#346287 = VECTOR('',#346288,1.); +#346288 = DIRECTION('',(0.,0.,1.)); +#346289 = ORIENTED_EDGE('',*,*,#346290,.F.); +#346290 = EDGE_CURVE('',#346252,#346283,#346291,.T.); +#346291 = LINE('',#346292,#346293); +#346292 = CARTESIAN_POINT('',(141.625,-81.66,1.51)); +#346293 = VECTOR('',#346294,1.); +#346294 = DIRECTION('',(0.,-1.,0.)); +#346295 = PLANE('',#346296); +#346296 = AXIS2_PLACEMENT_3D('',#346297,#346298,#346299); +#346297 = CARTESIAN_POINT('',(141.625,-81.66,1.51)); +#346298 = DIRECTION('',(1.,0.,-0.)); +#346299 = DIRECTION('',(0.,-1.,0.)); +#346300 = ADVANCED_FACE('',(#346301),#346317,.T.); +#346301 = FACE_BOUND('',#346302,.T.); +#346302 = EDGE_LOOP('',(#346303,#346304,#346310,#346311)); +#346303 = ORIENTED_EDGE('',*,*,#346282,.T.); +#346304 = ORIENTED_EDGE('',*,*,#346305,.T.); +#346305 = EDGE_CURVE('',#346275,#346205,#346306,.T.); +#346306 = LINE('',#346307,#346308); +#346307 = CARTESIAN_POINT('',(141.625,-83.16,1.55)); +#346308 = VECTOR('',#346309,1.); +#346309 = DIRECTION('',(-1.,0.,0.)); +#346310 = ORIENTED_EDGE('',*,*,#346202,.F.); +#346311 = ORIENTED_EDGE('',*,*,#346312,.F.); +#346312 = EDGE_CURVE('',#346283,#346203,#346313,.T.); +#346313 = LINE('',#346314,#346315); +#346314 = CARTESIAN_POINT('',(141.625,-83.16,1.51)); +#346315 = VECTOR('',#346316,1.); +#346316 = DIRECTION('',(-1.,0.,0.)); +#346317 = PLANE('',#346318); +#346318 = AXIS2_PLACEMENT_3D('',#346319,#346320,#346321); +#346319 = CARTESIAN_POINT('',(141.625,-83.16,1.51)); +#346320 = DIRECTION('',(0.,-1.,0.)); +#346321 = DIRECTION('',(-1.,0.,0.)); +#346322 = ADVANCED_FACE('',(#346323),#346329,.F.); +#346323 = FACE_BOUND('',#346324,.T.); +#346324 = EDGE_LOOP('',(#346325,#346326,#346327,#346328)); +#346325 = ORIENTED_EDGE('',*,*,#346228,.T.); +#346326 = ORIENTED_EDGE('',*,*,#346259,.T.); +#346327 = ORIENTED_EDGE('',*,*,#346290,.T.); +#346328 = ORIENTED_EDGE('',*,*,#346312,.T.); +#346329 = PLANE('',#346330); +#346330 = AXIS2_PLACEMENT_3D('',#346331,#346332,#346333); +#346331 = CARTESIAN_POINT('',(0.,0.,1.51)); +#346332 = DIRECTION('',(0.,0.,1.)); +#346333 = DIRECTION('',(1.,0.,-0.)); +#346334 = ADVANCED_FACE('',(#346335),#346341,.T.); +#346335 = FACE_BOUND('',#346336,.F.); +#346336 = EDGE_LOOP('',(#346337,#346338,#346339,#346340)); +#346337 = ORIENTED_EDGE('',*,*,#346212,.T.); +#346338 = ORIENTED_EDGE('',*,*,#346243,.T.); +#346339 = ORIENTED_EDGE('',*,*,#346274,.T.); +#346340 = ORIENTED_EDGE('',*,*,#346305,.T.); +#346341 = PLANE('',#346342); +#346342 = AXIS2_PLACEMENT_3D('',#346343,#346344,#346345); +#346343 = CARTESIAN_POINT('',(0.,0.,1.55)); +#346344 = DIRECTION('',(0.,0.,1.)); +#346345 = DIRECTION('',(1.,0.,-0.)); +#346346 = MANIFOLD_SOLID_BREP('',#346347); +#346347 = CLOSED_SHELL('',(#346348,#346381,#346401,#346421)); +#346348 = ADVANCED_FACE('',(#346349),#346376,.T.); +#346349 = FACE_BOUND('',#346350,.F.); +#346350 = EDGE_LOOP('',(#346351,#346361,#346368,#346369)); +#346351 = ORIENTED_EDGE('',*,*,#346352,.T.); +#346352 = EDGE_CURVE('',#346353,#346355,#346357,.T.); +#346353 = VERTEX_POINT('',#346354); +#346354 = CARTESIAN_POINT('',(135.374999,-101.,1.51)); +#346355 = VERTEX_POINT('',#346356); +#346356 = CARTESIAN_POINT('',(135.374999,-101.,1.55)); +#346357 = LINE('',#346358,#346359); +#346358 = CARTESIAN_POINT('',(135.374999,-101.,1.51)); +#346359 = VECTOR('',#346360,1.); +#346360 = DIRECTION('',(0.,0.,1.)); +#346361 = ORIENTED_EDGE('',*,*,#346362,.T.); +#346362 = EDGE_CURVE('',#346355,#346355,#346363,.T.); +#346363 = CIRCLE('',#346364,1.124999); +#346364 = AXIS2_PLACEMENT_3D('',#346365,#346366,#346367); +#346365 = CARTESIAN_POINT('',(134.25,-101.,1.55)); +#346366 = DIRECTION('',(0.,0.,1.)); +#346367 = DIRECTION('',(1.,0.,-0.)); +#346368 = ORIENTED_EDGE('',*,*,#346352,.F.); +#346369 = ORIENTED_EDGE('',*,*,#346370,.F.); +#346370 = EDGE_CURVE('',#346353,#346353,#346371,.T.); +#346371 = CIRCLE('',#346372,1.124999); +#346372 = AXIS2_PLACEMENT_3D('',#346373,#346374,#346375); +#346373 = CARTESIAN_POINT('',(134.25,-101.,1.51)); +#346374 = DIRECTION('',(0.,0.,1.)); +#346375 = DIRECTION('',(1.,0.,-0.)); +#346376 = CYLINDRICAL_SURFACE('',#346377,1.124999); +#346377 = AXIS2_PLACEMENT_3D('',#346378,#346379,#346380); +#346378 = CARTESIAN_POINT('',(134.25,-101.,1.51)); +#346379 = DIRECTION('',(-0.,-0.,-1.)); +#346380 = DIRECTION('',(1.,0.,-0.)); +#346381 = ADVANCED_FACE('',(#346382,#346385),#346396,.F.); +#346382 = FACE_BOUND('',#346383,.F.); +#346383 = EDGE_LOOP('',(#346384)); +#346384 = ORIENTED_EDGE('',*,*,#346370,.T.); +#346385 = FACE_BOUND('',#346386,.F.); +#346386 = EDGE_LOOP('',(#346387)); +#346387 = ORIENTED_EDGE('',*,*,#346388,.T.); +#346388 = EDGE_CURVE('',#346389,#346389,#346391,.T.); +#346389 = VERTEX_POINT('',#346390); +#346390 = CARTESIAN_POINT('',(134.25,-101.6,1.51)); +#346391 = CIRCLE('',#346392,0.6); +#346392 = AXIS2_PLACEMENT_3D('',#346393,#346394,#346395); +#346393 = CARTESIAN_POINT('',(134.25,-101.,1.51)); +#346394 = DIRECTION('',(-0.,0.,-1.)); +#346395 = DIRECTION('',(-0.,-1.,0.)); +#346396 = PLANE('',#346397); +#346397 = AXIS2_PLACEMENT_3D('',#346398,#346399,#346400); +#346398 = CARTESIAN_POINT('',(0.,0.,1.51)); +#346399 = DIRECTION('',(0.,0.,1.)); +#346400 = DIRECTION('',(1.,0.,-0.)); +#346401 = ADVANCED_FACE('',(#346402,#346405),#346416,.T.); +#346402 = FACE_BOUND('',#346403,.T.); +#346403 = EDGE_LOOP('',(#346404)); +#346404 = ORIENTED_EDGE('',*,*,#346362,.T.); +#346405 = FACE_BOUND('',#346406,.T.); +#346406 = EDGE_LOOP('',(#346407)); +#346407 = ORIENTED_EDGE('',*,*,#346408,.T.); +#346408 = EDGE_CURVE('',#346409,#346409,#346411,.T.); +#346409 = VERTEX_POINT('',#346410); +#346410 = CARTESIAN_POINT('',(134.25,-101.6,1.55)); +#346411 = CIRCLE('',#346412,0.6); +#346412 = AXIS2_PLACEMENT_3D('',#346413,#346414,#346415); +#346413 = CARTESIAN_POINT('',(134.25,-101.,1.55)); +#346414 = DIRECTION('',(-0.,0.,-1.)); +#346415 = DIRECTION('',(-0.,-1.,0.)); +#346416 = PLANE('',#346417); +#346417 = AXIS2_PLACEMENT_3D('',#346418,#346419,#346420); +#346418 = CARTESIAN_POINT('',(0.,0.,1.55)); +#346419 = DIRECTION('',(0.,0.,1.)); +#346420 = DIRECTION('',(1.,0.,-0.)); +#346421 = ADVANCED_FACE('',(#346422),#346433,.F.); +#346422 = FACE_BOUND('',#346423,.T.); +#346423 = EDGE_LOOP('',(#346424,#346425,#346431,#346432)); +#346424 = ORIENTED_EDGE('',*,*,#346388,.T.); +#346425 = ORIENTED_EDGE('',*,*,#346426,.T.); +#346426 = EDGE_CURVE('',#346389,#346409,#346427,.T.); +#346427 = LINE('',#346428,#346429); +#346428 = CARTESIAN_POINT('',(134.25,-101.6,-4.6E-02)); +#346429 = VECTOR('',#346430,1.); +#346430 = DIRECTION('',(0.,0.,1.)); +#346431 = ORIENTED_EDGE('',*,*,#346408,.F.); +#346432 = ORIENTED_EDGE('',*,*,#346426,.F.); +#346433 = CYLINDRICAL_SURFACE('',#346434,0.6); +#346434 = AXIS2_PLACEMENT_3D('',#346435,#346436,#346437); +#346435 = CARTESIAN_POINT('',(134.25,-101.,-4.6E-02)); +#346436 = DIRECTION('',(-0.,-0.,-1.)); +#346437 = DIRECTION('',(-0.,-1.,0.)); +#346438 = MANIFOLD_SOLID_BREP('',#346439); +#346439 = CLOSED_SHELL('',(#346440,#346473,#346493,#346513)); +#346440 = ADVANCED_FACE('',(#346441),#346468,.T.); +#346441 = FACE_BOUND('',#346442,.T.); +#346442 = EDGE_LOOP('',(#346443,#346453,#346460,#346461)); +#346443 = ORIENTED_EDGE('',*,*,#346444,.T.); +#346444 = EDGE_CURVE('',#346445,#346447,#346449,.T.); +#346445 = VERTEX_POINT('',#346446); +#346446 = CARTESIAN_POINT('',(135.374999,-101.,0.)); +#346447 = VERTEX_POINT('',#346448); +#346448 = CARTESIAN_POINT('',(135.374999,-101.,-4.E-02)); +#346449 = LINE('',#346450,#346451); +#346450 = CARTESIAN_POINT('',(135.374999,-101.,0.)); +#346451 = VECTOR('',#346452,1.); +#346452 = DIRECTION('',(0.,0.,-1.)); +#346453 = ORIENTED_EDGE('',*,*,#346454,.T.); +#346454 = EDGE_CURVE('',#346447,#346447,#346455,.T.); +#346455 = CIRCLE('',#346456,1.124999); +#346456 = AXIS2_PLACEMENT_3D('',#346457,#346458,#346459); +#346457 = CARTESIAN_POINT('',(134.25,-101.,-4.E-02)); +#346458 = DIRECTION('',(0.,0.,1.)); +#346459 = DIRECTION('',(1.,0.,-0.)); +#346460 = ORIENTED_EDGE('',*,*,#346444,.F.); +#346461 = ORIENTED_EDGE('',*,*,#346462,.F.); +#346462 = EDGE_CURVE('',#346445,#346445,#346463,.T.); +#346463 = CIRCLE('',#346464,1.124999); +#346464 = AXIS2_PLACEMENT_3D('',#346465,#346466,#346467); +#346465 = CARTESIAN_POINT('',(134.25,-101.,0.)); +#346466 = DIRECTION('',(0.,0.,1.)); +#346467 = DIRECTION('',(1.,0.,-0.)); +#346468 = CYLINDRICAL_SURFACE('',#346469,1.124999); +#346469 = AXIS2_PLACEMENT_3D('',#346470,#346471,#346472); +#346470 = CARTESIAN_POINT('',(134.25,-101.,0.)); +#346471 = DIRECTION('',(0.,0.,1.)); +#346472 = DIRECTION('',(1.,0.,-0.)); +#346473 = ADVANCED_FACE('',(#346474,#346477),#346488,.F.); +#346474 = FACE_BOUND('',#346475,.F.); +#346475 = EDGE_LOOP('',(#346476)); +#346476 = ORIENTED_EDGE('',*,*,#346462,.F.); +#346477 = FACE_BOUND('',#346478,.F.); +#346478 = EDGE_LOOP('',(#346479)); +#346479 = ORIENTED_EDGE('',*,*,#346480,.F.); +#346480 = EDGE_CURVE('',#346481,#346481,#346483,.T.); +#346481 = VERTEX_POINT('',#346482); +#346482 = CARTESIAN_POINT('',(134.25,-101.6,0.)); +#346483 = CIRCLE('',#346484,0.6); +#346484 = AXIS2_PLACEMENT_3D('',#346485,#346486,#346487); +#346485 = CARTESIAN_POINT('',(134.25,-101.,0.)); +#346486 = DIRECTION('',(-0.,0.,-1.)); +#346487 = DIRECTION('',(-0.,-1.,0.)); +#346488 = PLANE('',#346489); +#346489 = AXIS2_PLACEMENT_3D('',#346490,#346491,#346492); +#346490 = CARTESIAN_POINT('',(0.,0.,0.)); +#346491 = DIRECTION('',(-0.,-0.,-1.)); +#346492 = DIRECTION('',(-1.,0.,0.)); +#346493 = ADVANCED_FACE('',(#346494,#346497),#346508,.T.); +#346494 = FACE_BOUND('',#346495,.T.); +#346495 = EDGE_LOOP('',(#346496)); +#346496 = ORIENTED_EDGE('',*,*,#346454,.F.); +#346497 = FACE_BOUND('',#346498,.T.); +#346498 = EDGE_LOOP('',(#346499)); +#346499 = ORIENTED_EDGE('',*,*,#346500,.F.); +#346500 = EDGE_CURVE('',#346501,#346501,#346503,.T.); +#346501 = VERTEX_POINT('',#346502); +#346502 = CARTESIAN_POINT('',(134.25,-101.6,-4.E-02)); +#346503 = CIRCLE('',#346504,0.6); +#346504 = AXIS2_PLACEMENT_3D('',#346505,#346506,#346507); +#346505 = CARTESIAN_POINT('',(134.25,-101.,-4.E-02)); +#346506 = DIRECTION('',(-0.,0.,-1.)); +#346507 = DIRECTION('',(-0.,-1.,0.)); +#346508 = PLANE('',#346509); +#346509 = AXIS2_PLACEMENT_3D('',#346510,#346511,#346512); +#346510 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#346511 = DIRECTION('',(-0.,-0.,-1.)); +#346512 = DIRECTION('',(-1.,0.,0.)); +#346513 = ADVANCED_FACE('',(#346514),#346525,.F.); +#346514 = FACE_BOUND('',#346515,.T.); +#346515 = EDGE_LOOP('',(#346516,#346517,#346523,#346524)); +#346516 = ORIENTED_EDGE('',*,*,#346500,.T.); +#346517 = ORIENTED_EDGE('',*,*,#346518,.T.); +#346518 = EDGE_CURVE('',#346501,#346481,#346519,.T.); +#346519 = LINE('',#346520,#346521); +#346520 = CARTESIAN_POINT('',(134.25,-101.6,-4.6E-02)); +#346521 = VECTOR('',#346522,1.); +#346522 = DIRECTION('',(0.,0.,1.)); +#346523 = ORIENTED_EDGE('',*,*,#346480,.F.); +#346524 = ORIENTED_EDGE('',*,*,#346518,.F.); +#346525 = CYLINDRICAL_SURFACE('',#346526,0.6); +#346526 = AXIS2_PLACEMENT_3D('',#346527,#346528,#346529); +#346527 = CARTESIAN_POINT('',(134.25,-101.,-4.6E-02)); +#346528 = DIRECTION('',(-0.,-0.,-1.)); +#346529 = DIRECTION('',(-0.,-1.,0.)); +#346530 = MANIFOLD_SOLID_BREP('',#346531); +#346531 = CLOSED_SHELL('',(#346532,#346565,#346585,#346605)); +#346532 = ADVANCED_FACE('',(#346533),#346560,.T.); +#346533 = FACE_BOUND('',#346534,.F.); +#346534 = EDGE_LOOP('',(#346535,#346545,#346552,#346553)); +#346535 = ORIENTED_EDGE('',*,*,#346536,.T.); +#346536 = EDGE_CURVE('',#346537,#346539,#346541,.T.); +#346537 = VERTEX_POINT('',#346538); +#346538 = CARTESIAN_POINT('',(134.25,-101.625,-4.E-02)); +#346539 = VERTEX_POINT('',#346540); +#346540 = CARTESIAN_POINT('',(134.25,-101.625,1.55)); +#346541 = LINE('',#346542,#346543); +#346542 = CARTESIAN_POINT('',(134.25,-101.625,-4.E-02)); +#346543 = VECTOR('',#346544,1.); +#346544 = DIRECTION('',(0.,0.,1.)); +#346545 = ORIENTED_EDGE('',*,*,#346546,.T.); +#346546 = EDGE_CURVE('',#346539,#346539,#346547,.T.); +#346547 = CIRCLE('',#346548,0.625); +#346548 = AXIS2_PLACEMENT_3D('',#346549,#346550,#346551); +#346549 = CARTESIAN_POINT('',(134.25,-101.,1.55)); +#346550 = DIRECTION('',(0.,0.,1.)); +#346551 = DIRECTION('',(-0.,-1.,0.)); +#346552 = ORIENTED_EDGE('',*,*,#346536,.F.); +#346553 = ORIENTED_EDGE('',*,*,#346554,.F.); +#346554 = EDGE_CURVE('',#346537,#346537,#346555,.T.); +#346555 = CIRCLE('',#346556,0.625); +#346556 = AXIS2_PLACEMENT_3D('',#346557,#346558,#346559); +#346557 = CARTESIAN_POINT('',(134.25,-101.,-4.E-02)); +#346558 = DIRECTION('',(0.,0.,1.)); +#346559 = DIRECTION('',(-0.,-1.,0.)); +#346560 = CYLINDRICAL_SURFACE('',#346561,0.625); +#346561 = AXIS2_PLACEMENT_3D('',#346562,#346563,#346564); +#346562 = CARTESIAN_POINT('',(134.25,-101.,-4.E-02)); +#346563 = DIRECTION('',(-0.,-0.,-1.)); +#346564 = DIRECTION('',(-0.,-1.,0.)); +#346565 = ADVANCED_FACE('',(#346566,#346569),#346580,.F.); +#346566 = FACE_BOUND('',#346567,.F.); +#346567 = EDGE_LOOP('',(#346568)); +#346568 = ORIENTED_EDGE('',*,*,#346554,.T.); +#346569 = FACE_BOUND('',#346570,.F.); +#346570 = EDGE_LOOP('',(#346571)); +#346571 = ORIENTED_EDGE('',*,*,#346572,.T.); +#346572 = EDGE_CURVE('',#346573,#346573,#346575,.T.); +#346573 = VERTEX_POINT('',#346574); +#346574 = CARTESIAN_POINT('',(134.25,-101.6,-4.E-02)); +#346575 = CIRCLE('',#346576,0.6); +#346576 = AXIS2_PLACEMENT_3D('',#346577,#346578,#346579); +#346577 = CARTESIAN_POINT('',(134.25,-101.,-4.E-02)); +#346578 = DIRECTION('',(-0.,0.,-1.)); +#346579 = DIRECTION('',(-0.,-1.,0.)); +#346580 = PLANE('',#346581); +#346581 = AXIS2_PLACEMENT_3D('',#346582,#346583,#346584); +#346582 = CARTESIAN_POINT('',(134.25,-101.625,-4.E-02)); +#346583 = DIRECTION('',(0.,0.,1.)); +#346584 = DIRECTION('',(1.,0.,-0.)); +#346585 = ADVANCED_FACE('',(#346586,#346589),#346600,.T.); +#346586 = FACE_BOUND('',#346587,.T.); +#346587 = EDGE_LOOP('',(#346588)); +#346588 = ORIENTED_EDGE('',*,*,#346546,.T.); +#346589 = FACE_BOUND('',#346590,.T.); +#346590 = EDGE_LOOP('',(#346591)); +#346591 = ORIENTED_EDGE('',*,*,#346592,.T.); +#346592 = EDGE_CURVE('',#346593,#346593,#346595,.T.); +#346593 = VERTEX_POINT('',#346594); +#346594 = CARTESIAN_POINT('',(134.25,-101.6,1.55)); +#346595 = CIRCLE('',#346596,0.6); +#346596 = AXIS2_PLACEMENT_3D('',#346597,#346598,#346599); +#346597 = CARTESIAN_POINT('',(134.25,-101.,1.55)); +#346598 = DIRECTION('',(-0.,0.,-1.)); +#346599 = DIRECTION('',(-0.,-1.,0.)); +#346600 = PLANE('',#346601); +#346601 = AXIS2_PLACEMENT_3D('',#346602,#346603,#346604); +#346602 = CARTESIAN_POINT('',(134.25,-101.625,1.55)); +#346603 = DIRECTION('',(0.,0.,1.)); +#346604 = DIRECTION('',(1.,0.,-0.)); +#346605 = ADVANCED_FACE('',(#346606),#346617,.F.); +#346606 = FACE_BOUND('',#346607,.T.); +#346607 = EDGE_LOOP('',(#346608,#346609,#346615,#346616)); +#346608 = ORIENTED_EDGE('',*,*,#346572,.T.); +#346609 = ORIENTED_EDGE('',*,*,#346610,.T.); +#346610 = EDGE_CURVE('',#346573,#346593,#346611,.T.); +#346611 = LINE('',#346612,#346613); +#346612 = CARTESIAN_POINT('',(134.25,-101.6,-4.6E-02)); +#346613 = VECTOR('',#346614,1.); +#346614 = DIRECTION('',(0.,0.,1.)); +#346615 = ORIENTED_EDGE('',*,*,#346592,.F.); +#346616 = ORIENTED_EDGE('',*,*,#346610,.F.); +#346617 = CYLINDRICAL_SURFACE('',#346618,0.6); +#346618 = AXIS2_PLACEMENT_3D('',#346619,#346620,#346621); +#346619 = CARTESIAN_POINT('',(134.25,-101.,-4.6E-02)); +#346620 = DIRECTION('',(-0.,-0.,-1.)); +#346621 = DIRECTION('',(-0.,-1.,0.)); +#346622 = MANIFOLD_SOLID_BREP('',#346623); +#346623 = CLOSED_SHELL('',(#346624,#346664,#346695,#346726,#346748, + #346760)); +#346624 = ADVANCED_FACE('',(#346625),#346659,.T.); +#346625 = FACE_BOUND('',#346626,.T.); +#346626 = EDGE_LOOP('',(#346627,#346637,#346645,#346653)); +#346627 = ORIENTED_EDGE('',*,*,#346628,.T.); +#346628 = EDGE_CURVE('',#346629,#346631,#346633,.T.); +#346629 = VERTEX_POINT('',#346630); +#346630 = CARTESIAN_POINT('',(146.,-81.61,1.51)); +#346631 = VERTEX_POINT('',#346632); +#346632 = CARTESIAN_POINT('',(146.,-81.61,1.55)); +#346633 = LINE('',#346634,#346635); +#346634 = CARTESIAN_POINT('',(146.,-81.61,1.51)); +#346635 = VECTOR('',#346636,1.); +#346636 = DIRECTION('',(0.,0.,1.)); +#346637 = ORIENTED_EDGE('',*,*,#346638,.T.); +#346638 = EDGE_CURVE('',#346631,#346639,#346641,.T.); +#346639 = VERTEX_POINT('',#346640); +#346640 = CARTESIAN_POINT('',(146.,-80.71,1.55)); +#346641 = LINE('',#346642,#346643); +#346642 = CARTESIAN_POINT('',(146.,-81.61,1.55)); +#346643 = VECTOR('',#346644,1.); +#346644 = DIRECTION('',(0.,1.,0.)); +#346645 = ORIENTED_EDGE('',*,*,#346646,.F.); +#346646 = EDGE_CURVE('',#346647,#346639,#346649,.T.); +#346647 = VERTEX_POINT('',#346648); +#346648 = CARTESIAN_POINT('',(146.,-80.71,1.51)); +#346649 = LINE('',#346650,#346651); +#346650 = CARTESIAN_POINT('',(146.,-80.71,1.51)); +#346651 = VECTOR('',#346652,1.); +#346652 = DIRECTION('',(0.,0.,1.)); +#346653 = ORIENTED_EDGE('',*,*,#346654,.F.); +#346654 = EDGE_CURVE('',#346629,#346647,#346655,.T.); +#346655 = LINE('',#346656,#346657); +#346656 = CARTESIAN_POINT('',(146.,-81.61,1.51)); +#346657 = VECTOR('',#346658,1.); +#346658 = DIRECTION('',(0.,1.,0.)); +#346659 = PLANE('',#346660); +#346660 = AXIS2_PLACEMENT_3D('',#346661,#346662,#346663); +#346661 = CARTESIAN_POINT('',(146.,-81.61,1.51)); +#346662 = DIRECTION('',(-1.,0.,0.)); +#346663 = DIRECTION('',(0.,1.,0.)); +#346664 = ADVANCED_FACE('',(#346665),#346690,.T.); +#346665 = FACE_BOUND('',#346666,.T.); +#346666 = EDGE_LOOP('',(#346667,#346668,#346676,#346684)); +#346667 = ORIENTED_EDGE('',*,*,#346646,.T.); +#346668 = ORIENTED_EDGE('',*,*,#346669,.T.); +#346669 = EDGE_CURVE('',#346639,#346670,#346672,.T.); +#346670 = VERTEX_POINT('',#346671); +#346671 = CARTESIAN_POINT('',(147.5,-80.71,1.55)); +#346672 = LINE('',#346673,#346674); +#346673 = CARTESIAN_POINT('',(146.,-80.71,1.55)); +#346674 = VECTOR('',#346675,1.); +#346675 = DIRECTION('',(1.,0.,0.)); +#346676 = ORIENTED_EDGE('',*,*,#346677,.F.); +#346677 = EDGE_CURVE('',#346678,#346670,#346680,.T.); +#346678 = VERTEX_POINT('',#346679); +#346679 = CARTESIAN_POINT('',(147.5,-80.71,1.51)); +#346680 = LINE('',#346681,#346682); +#346681 = CARTESIAN_POINT('',(147.5,-80.71,1.51)); +#346682 = VECTOR('',#346683,1.); +#346683 = DIRECTION('',(0.,0.,1.)); +#346684 = ORIENTED_EDGE('',*,*,#346685,.F.); +#346685 = EDGE_CURVE('',#346647,#346678,#346686,.T.); +#346686 = LINE('',#346687,#346688); +#346687 = CARTESIAN_POINT('',(146.,-80.71,1.51)); +#346688 = VECTOR('',#346689,1.); +#346689 = DIRECTION('',(1.,0.,0.)); +#346690 = PLANE('',#346691); +#346691 = AXIS2_PLACEMENT_3D('',#346692,#346693,#346694); +#346692 = CARTESIAN_POINT('',(146.,-80.71,1.51)); +#346693 = DIRECTION('',(0.,1.,0.)); +#346694 = DIRECTION('',(1.,0.,0.)); +#346695 = ADVANCED_FACE('',(#346696),#346721,.T.); +#346696 = FACE_BOUND('',#346697,.T.); +#346697 = EDGE_LOOP('',(#346698,#346699,#346707,#346715)); +#346698 = ORIENTED_EDGE('',*,*,#346677,.T.); +#346699 = ORIENTED_EDGE('',*,*,#346700,.T.); +#346700 = EDGE_CURVE('',#346670,#346701,#346703,.T.); +#346701 = VERTEX_POINT('',#346702); +#346702 = CARTESIAN_POINT('',(147.5,-81.61,1.55)); +#346703 = LINE('',#346704,#346705); +#346704 = CARTESIAN_POINT('',(147.5,-80.71,1.55)); +#346705 = VECTOR('',#346706,1.); +#346706 = DIRECTION('',(0.,-1.,0.)); +#346707 = ORIENTED_EDGE('',*,*,#346708,.F.); +#346708 = EDGE_CURVE('',#346709,#346701,#346711,.T.); +#346709 = VERTEX_POINT('',#346710); +#346710 = CARTESIAN_POINT('',(147.5,-81.61,1.51)); +#346711 = LINE('',#346712,#346713); +#346712 = CARTESIAN_POINT('',(147.5,-81.61,1.51)); +#346713 = VECTOR('',#346714,1.); +#346714 = DIRECTION('',(0.,0.,1.)); +#346715 = ORIENTED_EDGE('',*,*,#346716,.F.); +#346716 = EDGE_CURVE('',#346678,#346709,#346717,.T.); +#346717 = LINE('',#346718,#346719); +#346718 = CARTESIAN_POINT('',(147.5,-80.71,1.51)); +#346719 = VECTOR('',#346720,1.); +#346720 = DIRECTION('',(0.,-1.,0.)); +#346721 = PLANE('',#346722); +#346722 = AXIS2_PLACEMENT_3D('',#346723,#346724,#346725); +#346723 = CARTESIAN_POINT('',(147.5,-80.71,1.51)); +#346724 = DIRECTION('',(1.,0.,-0.)); +#346725 = DIRECTION('',(0.,-1.,0.)); +#346726 = ADVANCED_FACE('',(#346727),#346743,.T.); +#346727 = FACE_BOUND('',#346728,.T.); +#346728 = EDGE_LOOP('',(#346729,#346730,#346736,#346737)); +#346729 = ORIENTED_EDGE('',*,*,#346708,.T.); +#346730 = ORIENTED_EDGE('',*,*,#346731,.T.); +#346731 = EDGE_CURVE('',#346701,#346631,#346732,.T.); +#346732 = LINE('',#346733,#346734); +#346733 = CARTESIAN_POINT('',(147.5,-81.61,1.55)); +#346734 = VECTOR('',#346735,1.); +#346735 = DIRECTION('',(-1.,0.,0.)); +#346736 = ORIENTED_EDGE('',*,*,#346628,.F.); +#346737 = ORIENTED_EDGE('',*,*,#346738,.F.); +#346738 = EDGE_CURVE('',#346709,#346629,#346739,.T.); +#346739 = LINE('',#346740,#346741); +#346740 = CARTESIAN_POINT('',(147.5,-81.61,1.51)); +#346741 = VECTOR('',#346742,1.); +#346742 = DIRECTION('',(-1.,0.,0.)); +#346743 = PLANE('',#346744); +#346744 = AXIS2_PLACEMENT_3D('',#346745,#346746,#346747); +#346745 = CARTESIAN_POINT('',(147.5,-81.61,1.51)); +#346746 = DIRECTION('',(0.,-1.,0.)); +#346747 = DIRECTION('',(-1.,0.,0.)); +#346748 = ADVANCED_FACE('',(#346749),#346755,.F.); +#346749 = FACE_BOUND('',#346750,.T.); +#346750 = EDGE_LOOP('',(#346751,#346752,#346753,#346754)); +#346751 = ORIENTED_EDGE('',*,*,#346654,.T.); +#346752 = ORIENTED_EDGE('',*,*,#346685,.T.); +#346753 = ORIENTED_EDGE('',*,*,#346716,.T.); +#346754 = ORIENTED_EDGE('',*,*,#346738,.T.); +#346755 = PLANE('',#346756); +#346756 = AXIS2_PLACEMENT_3D('',#346757,#346758,#346759); +#346757 = CARTESIAN_POINT('',(0.,0.,1.51)); +#346758 = DIRECTION('',(0.,0.,1.)); +#346759 = DIRECTION('',(1.,0.,-0.)); +#346760 = ADVANCED_FACE('',(#346761),#346767,.T.); +#346761 = FACE_BOUND('',#346762,.F.); +#346762 = EDGE_LOOP('',(#346763,#346764,#346765,#346766)); +#346763 = ORIENTED_EDGE('',*,*,#346638,.T.); +#346764 = ORIENTED_EDGE('',*,*,#346669,.T.); +#346765 = ORIENTED_EDGE('',*,*,#346700,.T.); +#346766 = ORIENTED_EDGE('',*,*,#346731,.T.); +#346767 = PLANE('',#346768); +#346768 = AXIS2_PLACEMENT_3D('',#346769,#346770,#346771); +#346769 = CARTESIAN_POINT('',(0.,0.,1.55)); +#346770 = DIRECTION('',(0.,0.,1.)); +#346771 = DIRECTION('',(1.,0.,-0.)); +#346772 = MANIFOLD_SOLID_BREP('',#346773); +#346773 = CLOSED_SHELL('',(#346774,#346816,#346847,#346880,#346911, + #346944,#346975,#347008,#347030,#347046)); +#346774 = ADVANCED_FACE('',(#346775),#346811,.T.); +#346775 = FACE_BOUND('',#346776,.T.); +#346776 = EDGE_LOOP('',(#346777,#346787,#346796,#346804)); +#346777 = ORIENTED_EDGE('',*,*,#346778,.T.); +#346778 = EDGE_CURVE('',#346779,#346781,#346783,.T.); +#346779 = VERTEX_POINT('',#346780); +#346780 = CARTESIAN_POINT('',(152.85,-150.2,1.51)); +#346781 = VERTEX_POINT('',#346782); +#346782 = CARTESIAN_POINT('',(152.85,-150.2,1.55)); +#346783 = LINE('',#346784,#346785); +#346784 = CARTESIAN_POINT('',(152.85,-150.2,1.51)); +#346785 = VECTOR('',#346786,1.); +#346786 = DIRECTION('',(0.,0.,1.)); +#346787 = ORIENTED_EDGE('',*,*,#346788,.T.); +#346788 = EDGE_CURVE('',#346781,#346789,#346791,.T.); +#346789 = VERTEX_POINT('',#346790); +#346790 = CARTESIAN_POINT('',(153.1,-149.95,1.55)); +#346791 = CIRCLE('',#346792,0.249998959685); +#346792 = AXIS2_PLACEMENT_3D('',#346793,#346794,#346795); +#346793 = CARTESIAN_POINT('',(153.09999895968,-150.1999989596,1.55)); +#346794 = DIRECTION('',(0.,0.,-1.)); +#346795 = DIRECTION('',(-0.999999999991,-4.161285723378E-06,-0.)); +#346796 = ORIENTED_EDGE('',*,*,#346797,.F.); +#346797 = EDGE_CURVE('',#346798,#346789,#346800,.T.); +#346798 = VERTEX_POINT('',#346799); +#346799 = CARTESIAN_POINT('',(153.1,-149.95,1.51)); +#346800 = LINE('',#346801,#346802); +#346801 = CARTESIAN_POINT('',(153.1,-149.95,1.51)); +#346802 = VECTOR('',#346803,1.); +#346803 = DIRECTION('',(0.,0.,1.)); +#346804 = ORIENTED_EDGE('',*,*,#346805,.F.); +#346805 = EDGE_CURVE('',#346779,#346798,#346806,.T.); +#346806 = CIRCLE('',#346807,0.249998959685); +#346807 = AXIS2_PLACEMENT_3D('',#346808,#346809,#346810); +#346808 = CARTESIAN_POINT('',(153.09999895968,-150.1999989596,1.51)); +#346809 = DIRECTION('',(0.,0.,-1.)); +#346810 = DIRECTION('',(-0.999999999991,-4.161285723378E-06,-0.)); +#346811 = CYLINDRICAL_SURFACE('',#346812,0.249998959685); +#346812 = AXIS2_PLACEMENT_3D('',#346813,#346814,#346815); +#346813 = CARTESIAN_POINT('',(153.09999895968,-150.1999989596,1.51)); +#346814 = DIRECTION('',(0.,0.,-1.)); +#346815 = DIRECTION('',(-0.999999999991,-4.161285723378E-06,-0.)); +#346816 = ADVANCED_FACE('',(#346817),#346842,.T.); +#346817 = FACE_BOUND('',#346818,.T.); +#346818 = EDGE_LOOP('',(#346819,#346820,#346828,#346836)); +#346819 = ORIENTED_EDGE('',*,*,#346797,.T.); +#346820 = ORIENTED_EDGE('',*,*,#346821,.T.); +#346821 = EDGE_CURVE('',#346789,#346822,#346824,.T.); +#346822 = VERTEX_POINT('',#346823); +#346823 = CARTESIAN_POINT('',(153.6,-149.95,1.55)); +#346824 = LINE('',#346825,#346826); +#346825 = CARTESIAN_POINT('',(153.1,-149.95,1.55)); +#346826 = VECTOR('',#346827,1.); +#346827 = DIRECTION('',(1.,0.,0.)); +#346828 = ORIENTED_EDGE('',*,*,#346829,.F.); +#346829 = EDGE_CURVE('',#346830,#346822,#346832,.T.); +#346830 = VERTEX_POINT('',#346831); +#346831 = CARTESIAN_POINT('',(153.6,-149.95,1.51)); +#346832 = LINE('',#346833,#346834); +#346833 = CARTESIAN_POINT('',(153.6,-149.95,1.51)); +#346834 = VECTOR('',#346835,1.); +#346835 = DIRECTION('',(0.,0.,1.)); +#346836 = ORIENTED_EDGE('',*,*,#346837,.F.); +#346837 = EDGE_CURVE('',#346798,#346830,#346838,.T.); +#346838 = LINE('',#346839,#346840); +#346839 = CARTESIAN_POINT('',(153.1,-149.95,1.51)); +#346840 = VECTOR('',#346841,1.); +#346841 = DIRECTION('',(1.,0.,0.)); +#346842 = PLANE('',#346843); +#346843 = AXIS2_PLACEMENT_3D('',#346844,#346845,#346846); +#346844 = CARTESIAN_POINT('',(153.1,-149.95,1.51)); +#346845 = DIRECTION('',(0.,1.,0.)); +#346846 = DIRECTION('',(1.,0.,0.)); +#346847 = ADVANCED_FACE('',(#346848),#346875,.T.); +#346848 = FACE_BOUND('',#346849,.T.); +#346849 = EDGE_LOOP('',(#346850,#346851,#346860,#346868)); +#346850 = ORIENTED_EDGE('',*,*,#346829,.T.); +#346851 = ORIENTED_EDGE('',*,*,#346852,.T.); +#346852 = EDGE_CURVE('',#346822,#346853,#346855,.T.); +#346853 = VERTEX_POINT('',#346854); +#346854 = CARTESIAN_POINT('',(153.85,-150.2,1.55)); +#346855 = CIRCLE('',#346856,0.249998959685); +#346856 = AXIS2_PLACEMENT_3D('',#346857,#346858,#346859); +#346857 = CARTESIAN_POINT('',(153.60000104031,-150.1999989596,1.55)); +#346858 = DIRECTION('',(0.,0.,-1.)); +#346859 = DIRECTION('',(-4.161285837067E-06,0.999999999991,0.)); +#346860 = ORIENTED_EDGE('',*,*,#346861,.F.); +#346861 = EDGE_CURVE('',#346862,#346853,#346864,.T.); +#346862 = VERTEX_POINT('',#346863); +#346863 = CARTESIAN_POINT('',(153.85,-150.2,1.51)); +#346864 = LINE('',#346865,#346866); +#346865 = CARTESIAN_POINT('',(153.85,-150.2,1.51)); +#346866 = VECTOR('',#346867,1.); +#346867 = DIRECTION('',(0.,0.,1.)); +#346868 = ORIENTED_EDGE('',*,*,#346869,.F.); +#346869 = EDGE_CURVE('',#346830,#346862,#346870,.T.); +#346870 = CIRCLE('',#346871,0.249998959685); +#346871 = AXIS2_PLACEMENT_3D('',#346872,#346873,#346874); +#346872 = CARTESIAN_POINT('',(153.60000104031,-150.1999989596,1.51)); +#346873 = DIRECTION('',(0.,0.,-1.)); +#346874 = DIRECTION('',(-4.161285837067E-06,0.999999999991,0.)); +#346875 = CYLINDRICAL_SURFACE('',#346876,0.249998959685); +#346876 = AXIS2_PLACEMENT_3D('',#346877,#346878,#346879); +#346877 = CARTESIAN_POINT('',(153.60000104031,-150.1999989596,1.51)); +#346878 = DIRECTION('',(0.,0.,-1.)); +#346879 = DIRECTION('',(-4.161285837067E-06,0.999999999991,0.)); +#346880 = ADVANCED_FACE('',(#346881),#346906,.T.); +#346881 = FACE_BOUND('',#346882,.T.); +#346882 = EDGE_LOOP('',(#346883,#346884,#346892,#346900)); +#346883 = ORIENTED_EDGE('',*,*,#346861,.T.); +#346884 = ORIENTED_EDGE('',*,*,#346885,.T.); +#346885 = EDGE_CURVE('',#346853,#346886,#346888,.T.); +#346886 = VERTEX_POINT('',#346887); +#346887 = CARTESIAN_POINT('',(153.85,-151.15,1.55)); +#346888 = LINE('',#346889,#346890); +#346889 = CARTESIAN_POINT('',(153.85,-150.2,1.55)); +#346890 = VECTOR('',#346891,1.); +#346891 = DIRECTION('',(0.,-1.,0.)); +#346892 = ORIENTED_EDGE('',*,*,#346893,.F.); +#346893 = EDGE_CURVE('',#346894,#346886,#346896,.T.); +#346894 = VERTEX_POINT('',#346895); +#346895 = CARTESIAN_POINT('',(153.85,-151.15,1.51)); +#346896 = LINE('',#346897,#346898); +#346897 = CARTESIAN_POINT('',(153.85,-151.15,1.51)); +#346898 = VECTOR('',#346899,1.); +#346899 = DIRECTION('',(0.,0.,1.)); +#346900 = ORIENTED_EDGE('',*,*,#346901,.F.); +#346901 = EDGE_CURVE('',#346862,#346894,#346902,.T.); +#346902 = LINE('',#346903,#346904); +#346903 = CARTESIAN_POINT('',(153.85,-150.2,1.51)); +#346904 = VECTOR('',#346905,1.); +#346905 = DIRECTION('',(0.,-1.,0.)); +#346906 = PLANE('',#346907); +#346907 = AXIS2_PLACEMENT_3D('',#346908,#346909,#346910); +#346908 = CARTESIAN_POINT('',(153.85,-150.2,1.51)); +#346909 = DIRECTION('',(1.,0.,-0.)); +#346910 = DIRECTION('',(0.,-1.,0.)); +#346911 = ADVANCED_FACE('',(#346912),#346939,.T.); +#346912 = FACE_BOUND('',#346913,.T.); +#346913 = EDGE_LOOP('',(#346914,#346915,#346924,#346932)); +#346914 = ORIENTED_EDGE('',*,*,#346893,.T.); +#346915 = ORIENTED_EDGE('',*,*,#346916,.T.); +#346916 = EDGE_CURVE('',#346886,#346917,#346919,.T.); +#346917 = VERTEX_POINT('',#346918); +#346918 = CARTESIAN_POINT('',(153.6,-151.4,1.55)); +#346919 = CIRCLE('',#346920,0.249998959685); +#346920 = AXIS2_PLACEMENT_3D('',#346921,#346922,#346923); +#346921 = CARTESIAN_POINT('',(153.60000104031,-151.1500010403,1.55)); +#346922 = DIRECTION('',(0.,0.,-1.)); +#346923 = DIRECTION('',(0.999999999991,4.161285837066E-06,0.)); +#346924 = ORIENTED_EDGE('',*,*,#346925,.F.); +#346925 = EDGE_CURVE('',#346926,#346917,#346928,.T.); +#346926 = VERTEX_POINT('',#346927); +#346927 = CARTESIAN_POINT('',(153.6,-151.4,1.51)); +#346928 = LINE('',#346929,#346930); +#346929 = CARTESIAN_POINT('',(153.6,-151.4,1.51)); +#346930 = VECTOR('',#346931,1.); +#346931 = DIRECTION('',(0.,0.,1.)); +#346932 = ORIENTED_EDGE('',*,*,#346933,.F.); +#346933 = EDGE_CURVE('',#346894,#346926,#346934,.T.); +#346934 = CIRCLE('',#346935,0.249998959685); +#346935 = AXIS2_PLACEMENT_3D('',#346936,#346937,#346938); +#346936 = CARTESIAN_POINT('',(153.60000104031,-151.1500010403,1.51)); +#346937 = DIRECTION('',(0.,0.,-1.)); +#346938 = DIRECTION('',(0.999999999991,4.161285837066E-06,0.)); +#346939 = CYLINDRICAL_SURFACE('',#346940,0.249998959685); +#346940 = AXIS2_PLACEMENT_3D('',#346941,#346942,#346943); +#346941 = CARTESIAN_POINT('',(153.60000104031,-151.1500010403,1.51)); +#346942 = DIRECTION('',(0.,0.,-1.)); +#346943 = DIRECTION('',(0.999999999991,4.161285837066E-06,0.)); +#346944 = ADVANCED_FACE('',(#346945),#346970,.T.); +#346945 = FACE_BOUND('',#346946,.T.); +#346946 = EDGE_LOOP('',(#346947,#346948,#346956,#346964)); +#346947 = ORIENTED_EDGE('',*,*,#346925,.T.); +#346948 = ORIENTED_EDGE('',*,*,#346949,.T.); +#346949 = EDGE_CURVE('',#346917,#346950,#346952,.T.); +#346950 = VERTEX_POINT('',#346951); +#346951 = CARTESIAN_POINT('',(153.1,-151.4,1.55)); +#346952 = LINE('',#346953,#346954); +#346953 = CARTESIAN_POINT('',(153.6,-151.4,1.55)); +#346954 = VECTOR('',#346955,1.); +#346955 = DIRECTION('',(-1.,0.,0.)); +#346956 = ORIENTED_EDGE('',*,*,#346957,.F.); +#346957 = EDGE_CURVE('',#346958,#346950,#346960,.T.); +#346958 = VERTEX_POINT('',#346959); +#346959 = CARTESIAN_POINT('',(153.1,-151.4,1.51)); +#346960 = LINE('',#346961,#346962); +#346961 = CARTESIAN_POINT('',(153.1,-151.4,1.51)); +#346962 = VECTOR('',#346963,1.); +#346963 = DIRECTION('',(0.,0.,1.)); +#346964 = ORIENTED_EDGE('',*,*,#346965,.F.); +#346965 = EDGE_CURVE('',#346926,#346958,#346966,.T.); +#346966 = LINE('',#346967,#346968); +#346967 = CARTESIAN_POINT('',(153.6,-151.4,1.51)); +#346968 = VECTOR('',#346969,1.); +#346969 = DIRECTION('',(-1.,0.,0.)); +#346970 = PLANE('',#346971); +#346971 = AXIS2_PLACEMENT_3D('',#346972,#346973,#346974); +#346972 = CARTESIAN_POINT('',(153.6,-151.4,1.51)); +#346973 = DIRECTION('',(0.,-1.,0.)); +#346974 = DIRECTION('',(-1.,0.,0.)); +#346975 = ADVANCED_FACE('',(#346976),#347003,.T.); +#346976 = FACE_BOUND('',#346977,.T.); +#346977 = EDGE_LOOP('',(#346978,#346979,#346988,#346996)); +#346978 = ORIENTED_EDGE('',*,*,#346957,.T.); +#346979 = ORIENTED_EDGE('',*,*,#346980,.T.); +#346980 = EDGE_CURVE('',#346950,#346981,#346983,.T.); +#346981 = VERTEX_POINT('',#346982); +#346982 = CARTESIAN_POINT('',(152.85,-151.15,1.55)); +#346983 = CIRCLE('',#346984,0.249998959685); +#346984 = AXIS2_PLACEMENT_3D('',#346985,#346986,#346987); +#346985 = CARTESIAN_POINT('',(153.09999895968,-151.1500010403,1.55)); +#346986 = DIRECTION('',(0.,0.,-1.)); +#346987 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#346988 = ORIENTED_EDGE('',*,*,#346989,.F.); +#346989 = EDGE_CURVE('',#346990,#346981,#346992,.T.); +#346990 = VERTEX_POINT('',#346991); +#346991 = CARTESIAN_POINT('',(152.85,-151.15,1.51)); +#346992 = LINE('',#346993,#346994); +#346993 = CARTESIAN_POINT('',(152.85,-151.15,1.51)); +#346994 = VECTOR('',#346995,1.); +#346995 = DIRECTION('',(0.,0.,1.)); +#346996 = ORIENTED_EDGE('',*,*,#346997,.F.); +#346997 = EDGE_CURVE('',#346958,#346990,#346998,.T.); +#346998 = CIRCLE('',#346999,0.249998959685); +#346999 = AXIS2_PLACEMENT_3D('',#347000,#347001,#347002); +#347000 = CARTESIAN_POINT('',(153.09999895968,-151.1500010403,1.51)); +#347001 = DIRECTION('',(0.,0.,-1.)); +#347002 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#347003 = CYLINDRICAL_SURFACE('',#347004,0.249998959685); +#347004 = AXIS2_PLACEMENT_3D('',#347005,#347006,#347007); +#347005 = CARTESIAN_POINT('',(153.09999895968,-151.1500010403,1.51)); +#347006 = DIRECTION('',(0.,0.,-1.)); +#347007 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#347008 = ADVANCED_FACE('',(#347009),#347025,.T.); +#347009 = FACE_BOUND('',#347010,.T.); +#347010 = EDGE_LOOP('',(#347011,#347012,#347018,#347019)); +#347011 = ORIENTED_EDGE('',*,*,#346989,.T.); +#347012 = ORIENTED_EDGE('',*,*,#347013,.T.); +#347013 = EDGE_CURVE('',#346981,#346781,#347014,.T.); +#347014 = LINE('',#347015,#347016); +#347015 = CARTESIAN_POINT('',(152.85,-151.15,1.55)); +#347016 = VECTOR('',#347017,1.); +#347017 = DIRECTION('',(0.,1.,0.)); +#347018 = ORIENTED_EDGE('',*,*,#346778,.F.); +#347019 = ORIENTED_EDGE('',*,*,#347020,.F.); +#347020 = EDGE_CURVE('',#346990,#346779,#347021,.T.); +#347021 = LINE('',#347022,#347023); +#347022 = CARTESIAN_POINT('',(152.85,-151.15,1.51)); +#347023 = VECTOR('',#347024,1.); +#347024 = DIRECTION('',(0.,1.,0.)); +#347025 = PLANE('',#347026); +#347026 = AXIS2_PLACEMENT_3D('',#347027,#347028,#347029); +#347027 = CARTESIAN_POINT('',(152.85,-151.15,1.51)); +#347028 = DIRECTION('',(-1.,0.,0.)); +#347029 = DIRECTION('',(0.,1.,0.)); +#347030 = ADVANCED_FACE('',(#347031),#347041,.F.); +#347031 = FACE_BOUND('',#347032,.T.); +#347032 = EDGE_LOOP('',(#347033,#347034,#347035,#347036,#347037,#347038, + #347039,#347040)); +#347033 = ORIENTED_EDGE('',*,*,#346805,.T.); +#347034 = ORIENTED_EDGE('',*,*,#346837,.T.); +#347035 = ORIENTED_EDGE('',*,*,#346869,.T.); +#347036 = ORIENTED_EDGE('',*,*,#346901,.T.); +#347037 = ORIENTED_EDGE('',*,*,#346933,.T.); +#347038 = ORIENTED_EDGE('',*,*,#346965,.T.); +#347039 = ORIENTED_EDGE('',*,*,#346997,.T.); +#347040 = ORIENTED_EDGE('',*,*,#347020,.T.); +#347041 = PLANE('',#347042); +#347042 = AXIS2_PLACEMENT_3D('',#347043,#347044,#347045); +#347043 = CARTESIAN_POINT('',(0.,0.,1.51)); +#347044 = DIRECTION('',(0.,0.,1.)); +#347045 = DIRECTION('',(1.,0.,-0.)); +#347046 = ADVANCED_FACE('',(#347047),#347057,.T.); +#347047 = FACE_BOUND('',#347048,.F.); +#347048 = EDGE_LOOP('',(#347049,#347050,#347051,#347052,#347053,#347054, + #347055,#347056)); +#347049 = ORIENTED_EDGE('',*,*,#346788,.T.); +#347050 = ORIENTED_EDGE('',*,*,#346821,.T.); +#347051 = ORIENTED_EDGE('',*,*,#346852,.T.); +#347052 = ORIENTED_EDGE('',*,*,#346885,.T.); +#347053 = ORIENTED_EDGE('',*,*,#346916,.T.); +#347054 = ORIENTED_EDGE('',*,*,#346949,.T.); +#347055 = ORIENTED_EDGE('',*,*,#346980,.T.); +#347056 = ORIENTED_EDGE('',*,*,#347013,.T.); +#347057 = PLANE('',#347058); +#347058 = AXIS2_PLACEMENT_3D('',#347059,#347060,#347061); +#347059 = CARTESIAN_POINT('',(0.,0.,1.55)); +#347060 = DIRECTION('',(0.,0.,1.)); +#347061 = DIRECTION('',(1.,0.,-0.)); +#347062 = MANIFOLD_SOLID_BREP('',#347063); +#347063 = CLOSED_SHELL('',(#347064,#347106,#347137,#347170,#347201, + #347234,#347265,#347298,#347320,#347336)); +#347064 = ADVANCED_FACE('',(#347065),#347101,.T.); +#347065 = FACE_BOUND('',#347066,.T.); +#347066 = EDGE_LOOP('',(#347067,#347077,#347086,#347094)); +#347067 = ORIENTED_EDGE('',*,*,#347068,.T.); +#347068 = EDGE_CURVE('',#347069,#347071,#347073,.T.); +#347069 = VERTEX_POINT('',#347070); +#347070 = CARTESIAN_POINT('',(152.85,-145.05,1.51)); +#347071 = VERTEX_POINT('',#347072); +#347072 = CARTESIAN_POINT('',(152.85,-145.05,1.55)); +#347073 = LINE('',#347074,#347075); +#347074 = CARTESIAN_POINT('',(152.85,-145.05,1.51)); +#347075 = VECTOR('',#347076,1.); +#347076 = DIRECTION('',(0.,0.,1.)); +#347077 = ORIENTED_EDGE('',*,*,#347078,.T.); +#347078 = EDGE_CURVE('',#347071,#347079,#347081,.T.); +#347079 = VERTEX_POINT('',#347080); +#347080 = CARTESIAN_POINT('',(153.1,-144.8,1.55)); +#347081 = CIRCLE('',#347082,0.249998959685); +#347082 = AXIS2_PLACEMENT_3D('',#347083,#347084,#347085); +#347083 = CARTESIAN_POINT('',(153.09999895968,-145.0499989596,1.55)); +#347084 = DIRECTION('',(0.,0.,-1.)); +#347085 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#347086 = ORIENTED_EDGE('',*,*,#347087,.F.); +#347087 = EDGE_CURVE('',#347088,#347079,#347090,.T.); +#347088 = VERTEX_POINT('',#347089); +#347089 = CARTESIAN_POINT('',(153.1,-144.8,1.51)); +#347090 = LINE('',#347091,#347092); +#347091 = CARTESIAN_POINT('',(153.1,-144.8,1.51)); +#347092 = VECTOR('',#347093,1.); +#347093 = DIRECTION('',(0.,0.,1.)); +#347094 = ORIENTED_EDGE('',*,*,#347095,.F.); +#347095 = EDGE_CURVE('',#347069,#347088,#347096,.T.); +#347096 = CIRCLE('',#347097,0.249998959685); +#347097 = AXIS2_PLACEMENT_3D('',#347098,#347099,#347100); +#347098 = CARTESIAN_POINT('',(153.09999895968,-145.0499989596,1.51)); +#347099 = DIRECTION('',(0.,0.,-1.)); +#347100 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#347101 = CYLINDRICAL_SURFACE('',#347102,0.249998959685); +#347102 = AXIS2_PLACEMENT_3D('',#347103,#347104,#347105); +#347103 = CARTESIAN_POINT('',(153.09999895968,-145.0499989596,1.51)); +#347104 = DIRECTION('',(0.,0.,-1.)); +#347105 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#347106 = ADVANCED_FACE('',(#347107),#347132,.T.); +#347107 = FACE_BOUND('',#347108,.T.); +#347108 = EDGE_LOOP('',(#347109,#347110,#347118,#347126)); +#347109 = ORIENTED_EDGE('',*,*,#347087,.T.); +#347110 = ORIENTED_EDGE('',*,*,#347111,.T.); +#347111 = EDGE_CURVE('',#347079,#347112,#347114,.T.); +#347112 = VERTEX_POINT('',#347113); +#347113 = CARTESIAN_POINT('',(153.6,-144.8,1.55)); +#347114 = LINE('',#347115,#347116); +#347115 = CARTESIAN_POINT('',(153.1,-144.8,1.55)); +#347116 = VECTOR('',#347117,1.); +#347117 = DIRECTION('',(1.,0.,0.)); +#347118 = ORIENTED_EDGE('',*,*,#347119,.F.); +#347119 = EDGE_CURVE('',#347120,#347112,#347122,.T.); +#347120 = VERTEX_POINT('',#347121); +#347121 = CARTESIAN_POINT('',(153.6,-144.8,1.51)); +#347122 = LINE('',#347123,#347124); +#347123 = CARTESIAN_POINT('',(153.6,-144.8,1.51)); +#347124 = VECTOR('',#347125,1.); +#347125 = DIRECTION('',(0.,0.,1.)); +#347126 = ORIENTED_EDGE('',*,*,#347127,.F.); +#347127 = EDGE_CURVE('',#347088,#347120,#347128,.T.); +#347128 = LINE('',#347129,#347130); +#347129 = CARTESIAN_POINT('',(153.1,-144.8,1.51)); +#347130 = VECTOR('',#347131,1.); +#347131 = DIRECTION('',(1.,0.,0.)); +#347132 = PLANE('',#347133); +#347133 = AXIS2_PLACEMENT_3D('',#347134,#347135,#347136); +#347134 = CARTESIAN_POINT('',(153.1,-144.8,1.51)); +#347135 = DIRECTION('',(0.,1.,0.)); +#347136 = DIRECTION('',(1.,0.,0.)); +#347137 = ADVANCED_FACE('',(#347138),#347165,.T.); +#347138 = FACE_BOUND('',#347139,.T.); +#347139 = EDGE_LOOP('',(#347140,#347141,#347150,#347158)); +#347140 = ORIENTED_EDGE('',*,*,#347119,.T.); +#347141 = ORIENTED_EDGE('',*,*,#347142,.T.); +#347142 = EDGE_CURVE('',#347112,#347143,#347145,.T.); +#347143 = VERTEX_POINT('',#347144); +#347144 = CARTESIAN_POINT('',(153.85,-145.05,1.55)); +#347145 = CIRCLE('',#347146,0.249998959685); +#347146 = AXIS2_PLACEMENT_3D('',#347147,#347148,#347149); +#347147 = CARTESIAN_POINT('',(153.60000104031,-145.0499989596,1.55)); +#347148 = DIRECTION('',(0.,0.,-1.)); +#347149 = DIRECTION('',(-4.161286064442E-06,0.999999999991,0.)); +#347150 = ORIENTED_EDGE('',*,*,#347151,.F.); +#347151 = EDGE_CURVE('',#347152,#347143,#347154,.T.); +#347152 = VERTEX_POINT('',#347153); +#347153 = CARTESIAN_POINT('',(153.85,-145.05,1.51)); +#347154 = LINE('',#347155,#347156); +#347155 = CARTESIAN_POINT('',(153.85,-145.05,1.51)); +#347156 = VECTOR('',#347157,1.); +#347157 = DIRECTION('',(0.,0.,1.)); +#347158 = ORIENTED_EDGE('',*,*,#347159,.F.); +#347159 = EDGE_CURVE('',#347120,#347152,#347160,.T.); +#347160 = CIRCLE('',#347161,0.249998959685); +#347161 = AXIS2_PLACEMENT_3D('',#347162,#347163,#347164); +#347162 = CARTESIAN_POINT('',(153.60000104031,-145.0499989596,1.51)); +#347163 = DIRECTION('',(0.,0.,-1.)); +#347164 = DIRECTION('',(-4.161286064442E-06,0.999999999991,0.)); +#347165 = CYLINDRICAL_SURFACE('',#347166,0.249998959685); +#347166 = AXIS2_PLACEMENT_3D('',#347167,#347168,#347169); +#347167 = CARTESIAN_POINT('',(153.60000104031,-145.0499989596,1.51)); +#347168 = DIRECTION('',(0.,0.,-1.)); +#347169 = DIRECTION('',(-4.161286064442E-06,0.999999999991,0.)); +#347170 = ADVANCED_FACE('',(#347171),#347196,.T.); +#347171 = FACE_BOUND('',#347172,.T.); +#347172 = EDGE_LOOP('',(#347173,#347174,#347182,#347190)); +#347173 = ORIENTED_EDGE('',*,*,#347151,.T.); +#347174 = ORIENTED_EDGE('',*,*,#347175,.T.); +#347175 = EDGE_CURVE('',#347143,#347176,#347178,.T.); +#347176 = VERTEX_POINT('',#347177); +#347177 = CARTESIAN_POINT('',(153.85,-146.,1.55)); +#347178 = LINE('',#347179,#347180); +#347179 = CARTESIAN_POINT('',(153.85,-145.05,1.55)); +#347180 = VECTOR('',#347181,1.); +#347181 = DIRECTION('',(0.,-1.,0.)); +#347182 = ORIENTED_EDGE('',*,*,#347183,.F.); +#347183 = EDGE_CURVE('',#347184,#347176,#347186,.T.); +#347184 = VERTEX_POINT('',#347185); +#347185 = CARTESIAN_POINT('',(153.85,-146.,1.51)); +#347186 = LINE('',#347187,#347188); +#347187 = CARTESIAN_POINT('',(153.85,-146.,1.51)); +#347188 = VECTOR('',#347189,1.); +#347189 = DIRECTION('',(0.,0.,1.)); +#347190 = ORIENTED_EDGE('',*,*,#347191,.F.); +#347191 = EDGE_CURVE('',#347152,#347184,#347192,.T.); +#347192 = LINE('',#347193,#347194); +#347193 = CARTESIAN_POINT('',(153.85,-145.05,1.51)); +#347194 = VECTOR('',#347195,1.); +#347195 = DIRECTION('',(0.,-1.,0.)); +#347196 = PLANE('',#347197); +#347197 = AXIS2_PLACEMENT_3D('',#347198,#347199,#347200); +#347198 = CARTESIAN_POINT('',(153.85,-145.05,1.51)); +#347199 = DIRECTION('',(1.,0.,-0.)); +#347200 = DIRECTION('',(0.,-1.,0.)); +#347201 = ADVANCED_FACE('',(#347202),#347229,.T.); +#347202 = FACE_BOUND('',#347203,.T.); +#347203 = EDGE_LOOP('',(#347204,#347205,#347214,#347222)); +#347204 = ORIENTED_EDGE('',*,*,#347183,.T.); +#347205 = ORIENTED_EDGE('',*,*,#347206,.T.); +#347206 = EDGE_CURVE('',#347176,#347207,#347209,.T.); +#347207 = VERTEX_POINT('',#347208); +#347208 = CARTESIAN_POINT('',(153.6,-146.25,1.55)); +#347209 = CIRCLE('',#347210,0.249998959685); +#347210 = AXIS2_PLACEMENT_3D('',#347211,#347212,#347213); +#347211 = CARTESIAN_POINT('',(153.60000104031,-146.0000010403,1.55)); +#347212 = DIRECTION('',(0.,0.,-1.)); +#347213 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#347214 = ORIENTED_EDGE('',*,*,#347215,.F.); +#347215 = EDGE_CURVE('',#347216,#347207,#347218,.T.); +#347216 = VERTEX_POINT('',#347217); +#347217 = CARTESIAN_POINT('',(153.6,-146.25,1.51)); +#347218 = LINE('',#347219,#347220); +#347219 = CARTESIAN_POINT('',(153.6,-146.25,1.51)); +#347220 = VECTOR('',#347221,1.); +#347221 = DIRECTION('',(0.,0.,1.)); +#347222 = ORIENTED_EDGE('',*,*,#347223,.F.); +#347223 = EDGE_CURVE('',#347184,#347216,#347224,.T.); +#347224 = CIRCLE('',#347225,0.249998959685); +#347225 = AXIS2_PLACEMENT_3D('',#347226,#347227,#347228); +#347226 = CARTESIAN_POINT('',(153.60000104031,-146.0000010403,1.51)); +#347227 = DIRECTION('',(0.,0.,-1.)); +#347228 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#347229 = CYLINDRICAL_SURFACE('',#347230,0.249998959685); +#347230 = AXIS2_PLACEMENT_3D('',#347231,#347232,#347233); +#347231 = CARTESIAN_POINT('',(153.60000104031,-146.0000010403,1.51)); +#347232 = DIRECTION('',(0.,0.,-1.)); +#347233 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#347234 = ADVANCED_FACE('',(#347235),#347260,.T.); +#347235 = FACE_BOUND('',#347236,.T.); +#347236 = EDGE_LOOP('',(#347237,#347238,#347246,#347254)); +#347237 = ORIENTED_EDGE('',*,*,#347215,.T.); +#347238 = ORIENTED_EDGE('',*,*,#347239,.T.); +#347239 = EDGE_CURVE('',#347207,#347240,#347242,.T.); +#347240 = VERTEX_POINT('',#347241); +#347241 = CARTESIAN_POINT('',(153.1,-146.25,1.55)); +#347242 = LINE('',#347243,#347244); +#347243 = CARTESIAN_POINT('',(153.6,-146.25,1.55)); +#347244 = VECTOR('',#347245,1.); +#347245 = DIRECTION('',(-1.,0.,0.)); +#347246 = ORIENTED_EDGE('',*,*,#347247,.F.); +#347247 = EDGE_CURVE('',#347248,#347240,#347250,.T.); +#347248 = VERTEX_POINT('',#347249); +#347249 = CARTESIAN_POINT('',(153.1,-146.25,1.51)); +#347250 = LINE('',#347251,#347252); +#347251 = CARTESIAN_POINT('',(153.1,-146.25,1.51)); +#347252 = VECTOR('',#347253,1.); +#347253 = DIRECTION('',(0.,0.,1.)); +#347254 = ORIENTED_EDGE('',*,*,#347255,.F.); +#347255 = EDGE_CURVE('',#347216,#347248,#347256,.T.); +#347256 = LINE('',#347257,#347258); +#347257 = CARTESIAN_POINT('',(153.6,-146.25,1.51)); +#347258 = VECTOR('',#347259,1.); +#347259 = DIRECTION('',(-1.,0.,0.)); +#347260 = PLANE('',#347261); +#347261 = AXIS2_PLACEMENT_3D('',#347262,#347263,#347264); +#347262 = CARTESIAN_POINT('',(153.6,-146.25,1.51)); +#347263 = DIRECTION('',(0.,-1.,0.)); +#347264 = DIRECTION('',(-1.,0.,0.)); +#347265 = ADVANCED_FACE('',(#347266),#347293,.T.); +#347266 = FACE_BOUND('',#347267,.T.); +#347267 = EDGE_LOOP('',(#347268,#347269,#347278,#347286)); +#347268 = ORIENTED_EDGE('',*,*,#347247,.T.); +#347269 = ORIENTED_EDGE('',*,*,#347270,.T.); +#347270 = EDGE_CURVE('',#347240,#347271,#347273,.T.); +#347271 = VERTEX_POINT('',#347272); +#347272 = CARTESIAN_POINT('',(152.85,-146.,1.55)); +#347273 = CIRCLE('',#347274,0.249998959685); +#347274 = AXIS2_PLACEMENT_3D('',#347275,#347276,#347277); +#347275 = CARTESIAN_POINT('',(153.09999895968,-146.0000010403,1.55)); +#347276 = DIRECTION('',(0.,0.,-1.)); +#347277 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#347278 = ORIENTED_EDGE('',*,*,#347279,.F.); +#347279 = EDGE_CURVE('',#347280,#347271,#347282,.T.); +#347280 = VERTEX_POINT('',#347281); +#347281 = CARTESIAN_POINT('',(152.85,-146.,1.51)); +#347282 = LINE('',#347283,#347284); +#347283 = CARTESIAN_POINT('',(152.85,-146.,1.51)); +#347284 = VECTOR('',#347285,1.); +#347285 = DIRECTION('',(0.,0.,1.)); +#347286 = ORIENTED_EDGE('',*,*,#347287,.F.); +#347287 = EDGE_CURVE('',#347248,#347280,#347288,.T.); +#347288 = CIRCLE('',#347289,0.249998959685); +#347289 = AXIS2_PLACEMENT_3D('',#347290,#347291,#347292); +#347290 = CARTESIAN_POINT('',(153.09999895968,-146.0000010403,1.51)); +#347291 = DIRECTION('',(0.,0.,-1.)); +#347292 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#347293 = CYLINDRICAL_SURFACE('',#347294,0.249998959685); +#347294 = AXIS2_PLACEMENT_3D('',#347295,#347296,#347297); +#347295 = CARTESIAN_POINT('',(153.09999895968,-146.0000010403,1.51)); +#347296 = DIRECTION('',(0.,0.,-1.)); +#347297 = DIRECTION('',(4.161285609691E-06,-0.999999999991,0.)); +#347298 = ADVANCED_FACE('',(#347299),#347315,.T.); +#347299 = FACE_BOUND('',#347300,.T.); +#347300 = EDGE_LOOP('',(#347301,#347302,#347308,#347309)); +#347301 = ORIENTED_EDGE('',*,*,#347279,.T.); +#347302 = ORIENTED_EDGE('',*,*,#347303,.T.); +#347303 = EDGE_CURVE('',#347271,#347071,#347304,.T.); +#347304 = LINE('',#347305,#347306); +#347305 = CARTESIAN_POINT('',(152.85,-146.,1.55)); +#347306 = VECTOR('',#347307,1.); +#347307 = DIRECTION('',(0.,1.,0.)); +#347308 = ORIENTED_EDGE('',*,*,#347068,.F.); +#347309 = ORIENTED_EDGE('',*,*,#347310,.F.); +#347310 = EDGE_CURVE('',#347280,#347069,#347311,.T.); +#347311 = LINE('',#347312,#347313); +#347312 = CARTESIAN_POINT('',(152.85,-146.,1.51)); +#347313 = VECTOR('',#347314,1.); +#347314 = DIRECTION('',(0.,1.,0.)); +#347315 = PLANE('',#347316); +#347316 = AXIS2_PLACEMENT_3D('',#347317,#347318,#347319); +#347317 = CARTESIAN_POINT('',(152.85,-146.,1.51)); +#347318 = DIRECTION('',(-1.,0.,0.)); +#347319 = DIRECTION('',(0.,1.,0.)); +#347320 = ADVANCED_FACE('',(#347321),#347331,.F.); +#347321 = FACE_BOUND('',#347322,.T.); +#347322 = EDGE_LOOP('',(#347323,#347324,#347325,#347326,#347327,#347328, + #347329,#347330)); +#347323 = ORIENTED_EDGE('',*,*,#347095,.T.); +#347324 = ORIENTED_EDGE('',*,*,#347127,.T.); +#347325 = ORIENTED_EDGE('',*,*,#347159,.T.); +#347326 = ORIENTED_EDGE('',*,*,#347191,.T.); +#347327 = ORIENTED_EDGE('',*,*,#347223,.T.); +#347328 = ORIENTED_EDGE('',*,*,#347255,.T.); +#347329 = ORIENTED_EDGE('',*,*,#347287,.T.); +#347330 = ORIENTED_EDGE('',*,*,#347310,.T.); +#347331 = PLANE('',#347332); +#347332 = AXIS2_PLACEMENT_3D('',#347333,#347334,#347335); +#347333 = CARTESIAN_POINT('',(0.,0.,1.51)); +#347334 = DIRECTION('',(0.,0.,1.)); +#347335 = DIRECTION('',(1.,0.,-0.)); +#347336 = ADVANCED_FACE('',(#347337),#347347,.T.); +#347337 = FACE_BOUND('',#347338,.F.); +#347338 = EDGE_LOOP('',(#347339,#347340,#347341,#347342,#347343,#347344, + #347345,#347346)); +#347339 = ORIENTED_EDGE('',*,*,#347078,.T.); +#347340 = ORIENTED_EDGE('',*,*,#347111,.T.); +#347341 = ORIENTED_EDGE('',*,*,#347142,.T.); +#347342 = ORIENTED_EDGE('',*,*,#347175,.T.); +#347343 = ORIENTED_EDGE('',*,*,#347206,.T.); +#347344 = ORIENTED_EDGE('',*,*,#347239,.T.); +#347345 = ORIENTED_EDGE('',*,*,#347270,.T.); +#347346 = ORIENTED_EDGE('',*,*,#347303,.T.); +#347347 = PLANE('',#347348); +#347348 = AXIS2_PLACEMENT_3D('',#347349,#347350,#347351); +#347349 = CARTESIAN_POINT('',(0.,0.,1.55)); +#347350 = DIRECTION('',(0.,0.,1.)); +#347351 = DIRECTION('',(1.,0.,-0.)); +#347352 = MANIFOLD_SOLID_BREP('',#347353); +#347353 = CLOSED_SHELL('',(#347354,#347396,#347427,#347460,#347491, + #347524,#347555,#347588,#347610,#347626)); +#347354 = ADVANCED_FACE('',(#347355),#347391,.T.); +#347355 = FACE_BOUND('',#347356,.T.); +#347356 = EDGE_LOOP('',(#347357,#347367,#347376,#347384)); +#347357 = ORIENTED_EDGE('',*,*,#347358,.T.); +#347358 = EDGE_CURVE('',#347359,#347361,#347363,.T.); +#347359 = VERTEX_POINT('',#347360); +#347360 = CARTESIAN_POINT('',(148.18,-82.095,1.51)); +#347361 = VERTEX_POINT('',#347362); +#347362 = CARTESIAN_POINT('',(148.18,-82.095,1.55)); +#347363 = LINE('',#347364,#347365); +#347364 = CARTESIAN_POINT('',(148.18,-82.095,1.51)); +#347365 = VECTOR('',#347366,1.); +#347366 = DIRECTION('',(0.,0.,1.)); +#347367 = ORIENTED_EDGE('',*,*,#347368,.T.); +#347368 = EDGE_CURVE('',#347361,#347369,#347371,.T.); +#347369 = VERTEX_POINT('',#347370); +#347370 = CARTESIAN_POINT('',(148.315,-81.96,1.55)); +#347371 = CIRCLE('',#347372,0.135001418495); +#347372 = AXIS2_PLACEMENT_3D('',#347373,#347374,#347375); +#347373 = CARTESIAN_POINT('',(148.31500141848,-82.09500141848,1.55)); +#347374 = DIRECTION('',(0.,0.,-1.)); +#347375 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#347376 = ORIENTED_EDGE('',*,*,#347377,.F.); +#347377 = EDGE_CURVE('',#347378,#347369,#347380,.T.); +#347378 = VERTEX_POINT('',#347379); +#347379 = CARTESIAN_POINT('',(148.315,-81.96,1.51)); +#347380 = LINE('',#347381,#347382); +#347381 = CARTESIAN_POINT('',(148.315,-81.96,1.51)); +#347382 = VECTOR('',#347383,1.); +#347383 = DIRECTION('',(0.,0.,1.)); +#347384 = ORIENTED_EDGE('',*,*,#347385,.F.); +#347385 = EDGE_CURVE('',#347359,#347378,#347386,.T.); +#347386 = CIRCLE('',#347387,0.135001418495); +#347387 = AXIS2_PLACEMENT_3D('',#347388,#347389,#347390); +#347388 = CARTESIAN_POINT('',(148.31500141848,-82.09500141848,1.51)); +#347389 = DIRECTION('',(0.,0.,-1.)); +#347390 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#347391 = CYLINDRICAL_SURFACE('',#347392,0.135001418495); +#347392 = AXIS2_PLACEMENT_3D('',#347393,#347394,#347395); +#347393 = CARTESIAN_POINT('',(148.31500141848,-82.09500141848,1.51)); +#347394 = DIRECTION('',(0.,0.,-1.)); +#347395 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#347396 = ADVANCED_FACE('',(#347397),#347422,.T.); +#347397 = FACE_BOUND('',#347398,.T.); +#347398 = EDGE_LOOP('',(#347399,#347400,#347408,#347416)); +#347399 = ORIENTED_EDGE('',*,*,#347377,.T.); +#347400 = ORIENTED_EDGE('',*,*,#347401,.T.); +#347401 = EDGE_CURVE('',#347369,#347402,#347404,.T.); +#347402 = VERTEX_POINT('',#347403); +#347403 = CARTESIAN_POINT('',(148.685,-81.96,1.55)); +#347404 = LINE('',#347405,#347406); +#347405 = CARTESIAN_POINT('',(148.315,-81.96,1.55)); +#347406 = VECTOR('',#347407,1.); +#347407 = DIRECTION('',(1.,0.,0.)); +#347408 = ORIENTED_EDGE('',*,*,#347409,.F.); +#347409 = EDGE_CURVE('',#347410,#347402,#347412,.T.); +#347410 = VERTEX_POINT('',#347411); +#347411 = CARTESIAN_POINT('',(148.685,-81.96,1.51)); +#347412 = LINE('',#347413,#347414); +#347413 = CARTESIAN_POINT('',(148.685,-81.96,1.51)); +#347414 = VECTOR('',#347415,1.); +#347415 = DIRECTION('',(0.,0.,1.)); +#347416 = ORIENTED_EDGE('',*,*,#347417,.F.); +#347417 = EDGE_CURVE('',#347378,#347410,#347418,.T.); +#347418 = LINE('',#347419,#347420); +#347419 = CARTESIAN_POINT('',(148.315,-81.96,1.51)); +#347420 = VECTOR('',#347421,1.); +#347421 = DIRECTION('',(1.,0.,0.)); +#347422 = PLANE('',#347423); +#347423 = AXIS2_PLACEMENT_3D('',#347424,#347425,#347426); +#347424 = CARTESIAN_POINT('',(148.315,-81.96,1.51)); +#347425 = DIRECTION('',(0.,1.,0.)); +#347426 = DIRECTION('',(1.,0.,0.)); +#347427 = ADVANCED_FACE('',(#347428),#347455,.T.); +#347428 = FACE_BOUND('',#347429,.T.); +#347429 = EDGE_LOOP('',(#347430,#347431,#347440,#347448)); +#347430 = ORIENTED_EDGE('',*,*,#347409,.T.); +#347431 = ORIENTED_EDGE('',*,*,#347432,.T.); +#347432 = EDGE_CURVE('',#347402,#347433,#347435,.T.); +#347433 = VERTEX_POINT('',#347434); +#347434 = CARTESIAN_POINT('',(148.82,-82.095,1.55)); +#347435 = CIRCLE('',#347436,0.135001418495); +#347436 = AXIS2_PLACEMENT_3D('',#347437,#347438,#347439); +#347437 = CARTESIAN_POINT('',(148.68499858151,-82.09500141848,1.55)); +#347438 = DIRECTION('',(0.,0.,-1.)); +#347439 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#347440 = ORIENTED_EDGE('',*,*,#347441,.F.); +#347441 = EDGE_CURVE('',#347442,#347433,#347444,.T.); +#347442 = VERTEX_POINT('',#347443); +#347443 = CARTESIAN_POINT('',(148.82,-82.095,1.51)); +#347444 = LINE('',#347445,#347446); +#347445 = CARTESIAN_POINT('',(148.82,-82.095,1.51)); +#347446 = VECTOR('',#347447,1.); +#347447 = DIRECTION('',(0.,0.,1.)); +#347448 = ORIENTED_EDGE('',*,*,#347449,.F.); +#347449 = EDGE_CURVE('',#347410,#347442,#347450,.T.); +#347450 = CIRCLE('',#347451,0.135001418495); +#347451 = AXIS2_PLACEMENT_3D('',#347452,#347453,#347454); +#347452 = CARTESIAN_POINT('',(148.68499858151,-82.09500141848,1.51)); +#347453 = DIRECTION('',(0.,0.,-1.)); +#347454 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#347455 = CYLINDRICAL_SURFACE('',#347456,0.135001418495); +#347456 = AXIS2_PLACEMENT_3D('',#347457,#347458,#347459); +#347457 = CARTESIAN_POINT('',(148.68499858151,-82.09500141848,1.51)); +#347458 = DIRECTION('',(0.,0.,-1.)); +#347459 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#347460 = ADVANCED_FACE('',(#347461),#347486,.T.); +#347461 = FACE_BOUND('',#347462,.T.); +#347462 = EDGE_LOOP('',(#347463,#347464,#347472,#347480)); +#347463 = ORIENTED_EDGE('',*,*,#347441,.T.); +#347464 = ORIENTED_EDGE('',*,*,#347465,.T.); +#347465 = EDGE_CURVE('',#347433,#347466,#347468,.T.); +#347466 = VERTEX_POINT('',#347467); +#347467 = CARTESIAN_POINT('',(148.82,-82.365,1.55)); +#347468 = LINE('',#347469,#347470); +#347469 = CARTESIAN_POINT('',(148.82,-82.095,1.55)); +#347470 = VECTOR('',#347471,1.); +#347471 = DIRECTION('',(0.,-1.,0.)); +#347472 = ORIENTED_EDGE('',*,*,#347473,.F.); +#347473 = EDGE_CURVE('',#347474,#347466,#347476,.T.); +#347474 = VERTEX_POINT('',#347475); +#347475 = CARTESIAN_POINT('',(148.82,-82.365,1.51)); +#347476 = LINE('',#347477,#347478); +#347477 = CARTESIAN_POINT('',(148.82,-82.365,1.51)); +#347478 = VECTOR('',#347479,1.); +#347479 = DIRECTION('',(0.,0.,1.)); +#347480 = ORIENTED_EDGE('',*,*,#347481,.F.); +#347481 = EDGE_CURVE('',#347442,#347474,#347482,.T.); +#347482 = LINE('',#347483,#347484); +#347483 = CARTESIAN_POINT('',(148.82,-82.095,1.51)); +#347484 = VECTOR('',#347485,1.); +#347485 = DIRECTION('',(0.,-1.,0.)); +#347486 = PLANE('',#347487); +#347487 = AXIS2_PLACEMENT_3D('',#347488,#347489,#347490); +#347488 = CARTESIAN_POINT('',(148.82,-82.095,1.51)); +#347489 = DIRECTION('',(1.,0.,-0.)); +#347490 = DIRECTION('',(0.,-1.,0.)); +#347491 = ADVANCED_FACE('',(#347492),#347519,.T.); +#347492 = FACE_BOUND('',#347493,.T.); +#347493 = EDGE_LOOP('',(#347494,#347495,#347504,#347512)); +#347494 = ORIENTED_EDGE('',*,*,#347473,.T.); +#347495 = ORIENTED_EDGE('',*,*,#347496,.T.); +#347496 = EDGE_CURVE('',#347466,#347497,#347499,.T.); +#347497 = VERTEX_POINT('',#347498); +#347498 = CARTESIAN_POINT('',(148.685,-82.5,1.55)); +#347499 = CIRCLE('',#347500,0.135001418495); +#347500 = AXIS2_PLACEMENT_3D('',#347501,#347502,#347503); +#347501 = CARTESIAN_POINT('',(148.68499858151,-82.36499858151,1.55)); +#347502 = DIRECTION('',(0.,0.,-1.)); +#347503 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#347504 = ORIENTED_EDGE('',*,*,#347505,.F.); +#347505 = EDGE_CURVE('',#347506,#347497,#347508,.T.); +#347506 = VERTEX_POINT('',#347507); +#347507 = CARTESIAN_POINT('',(148.685,-82.5,1.51)); +#347508 = LINE('',#347509,#347510); +#347509 = CARTESIAN_POINT('',(148.685,-82.5,1.51)); +#347510 = VECTOR('',#347511,1.); +#347511 = DIRECTION('',(0.,0.,1.)); +#347512 = ORIENTED_EDGE('',*,*,#347513,.F.); +#347513 = EDGE_CURVE('',#347474,#347506,#347514,.T.); +#347514 = CIRCLE('',#347515,0.135001418495); +#347515 = AXIS2_PLACEMENT_3D('',#347516,#347517,#347518); +#347516 = CARTESIAN_POINT('',(148.68499858151,-82.36499858151,1.51)); +#347517 = DIRECTION('',(0.,0.,-1.)); +#347518 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#347519 = CYLINDRICAL_SURFACE('',#347520,0.135001418495); +#347520 = AXIS2_PLACEMENT_3D('',#347521,#347522,#347523); +#347521 = CARTESIAN_POINT('',(148.68499858151,-82.36499858151,1.51)); +#347522 = DIRECTION('',(0.,0.,-1.)); +#347523 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#347524 = ADVANCED_FACE('',(#347525),#347550,.T.); +#347525 = FACE_BOUND('',#347526,.T.); +#347526 = EDGE_LOOP('',(#347527,#347528,#347536,#347544)); +#347527 = ORIENTED_EDGE('',*,*,#347505,.T.); +#347528 = ORIENTED_EDGE('',*,*,#347529,.T.); +#347529 = EDGE_CURVE('',#347497,#347530,#347532,.T.); +#347530 = VERTEX_POINT('',#347531); +#347531 = CARTESIAN_POINT('',(148.315,-82.5,1.55)); +#347532 = LINE('',#347533,#347534); +#347533 = CARTESIAN_POINT('',(148.685,-82.5,1.55)); +#347534 = VECTOR('',#347535,1.); +#347535 = DIRECTION('',(-1.,0.,0.)); +#347536 = ORIENTED_EDGE('',*,*,#347537,.F.); +#347537 = EDGE_CURVE('',#347538,#347530,#347540,.T.); +#347538 = VERTEX_POINT('',#347539); +#347539 = CARTESIAN_POINT('',(148.315,-82.5,1.51)); +#347540 = LINE('',#347541,#347542); +#347541 = CARTESIAN_POINT('',(148.315,-82.5,1.51)); +#347542 = VECTOR('',#347543,1.); +#347543 = DIRECTION('',(0.,0.,1.)); +#347544 = ORIENTED_EDGE('',*,*,#347545,.F.); +#347545 = EDGE_CURVE('',#347506,#347538,#347546,.T.); +#347546 = LINE('',#347547,#347548); +#347547 = CARTESIAN_POINT('',(148.685,-82.5,1.51)); +#347548 = VECTOR('',#347549,1.); +#347549 = DIRECTION('',(-1.,0.,0.)); +#347550 = PLANE('',#347551); +#347551 = AXIS2_PLACEMENT_3D('',#347552,#347553,#347554); +#347552 = CARTESIAN_POINT('',(148.685,-82.5,1.51)); +#347553 = DIRECTION('',(0.,-1.,0.)); +#347554 = DIRECTION('',(-1.,0.,0.)); +#347555 = ADVANCED_FACE('',(#347556),#347583,.T.); +#347556 = FACE_BOUND('',#347557,.T.); +#347557 = EDGE_LOOP('',(#347558,#347559,#347568,#347576)); +#347558 = ORIENTED_EDGE('',*,*,#347537,.T.); +#347559 = ORIENTED_EDGE('',*,*,#347560,.T.); +#347560 = EDGE_CURVE('',#347530,#347561,#347563,.T.); +#347561 = VERTEX_POINT('',#347562); +#347562 = CARTESIAN_POINT('',(148.18,-82.365,1.55)); +#347563 = CIRCLE('',#347564,0.135001418495); +#347564 = AXIS2_PLACEMENT_3D('',#347565,#347566,#347567); +#347565 = CARTESIAN_POINT('',(148.31500141848,-82.36499858151,1.55)); +#347566 = DIRECTION('',(0.,0.,-1.)); +#347567 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347568 = ORIENTED_EDGE('',*,*,#347569,.F.); +#347569 = EDGE_CURVE('',#347570,#347561,#347572,.T.); +#347570 = VERTEX_POINT('',#347571); +#347571 = CARTESIAN_POINT('',(148.18,-82.365,1.51)); +#347572 = LINE('',#347573,#347574); +#347573 = CARTESIAN_POINT('',(148.18,-82.365,1.51)); +#347574 = VECTOR('',#347575,1.); +#347575 = DIRECTION('',(0.,0.,1.)); +#347576 = ORIENTED_EDGE('',*,*,#347577,.F.); +#347577 = EDGE_CURVE('',#347538,#347570,#347578,.T.); +#347578 = CIRCLE('',#347579,0.135001418495); +#347579 = AXIS2_PLACEMENT_3D('',#347580,#347581,#347582); +#347580 = CARTESIAN_POINT('',(148.31500141848,-82.36499858151,1.51)); +#347581 = DIRECTION('',(0.,0.,-1.)); +#347582 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347583 = CYLINDRICAL_SURFACE('',#347584,0.135001418495); +#347584 = AXIS2_PLACEMENT_3D('',#347585,#347586,#347587); +#347585 = CARTESIAN_POINT('',(148.31500141848,-82.36499858151,1.51)); +#347586 = DIRECTION('',(0.,0.,-1.)); +#347587 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347588 = ADVANCED_FACE('',(#347589),#347605,.T.); +#347589 = FACE_BOUND('',#347590,.T.); +#347590 = EDGE_LOOP('',(#347591,#347592,#347598,#347599)); +#347591 = ORIENTED_EDGE('',*,*,#347569,.T.); +#347592 = ORIENTED_EDGE('',*,*,#347593,.T.); +#347593 = EDGE_CURVE('',#347561,#347361,#347594,.T.); +#347594 = LINE('',#347595,#347596); +#347595 = CARTESIAN_POINT('',(148.18,-82.365,1.55)); +#347596 = VECTOR('',#347597,1.); +#347597 = DIRECTION('',(0.,1.,0.)); +#347598 = ORIENTED_EDGE('',*,*,#347358,.F.); +#347599 = ORIENTED_EDGE('',*,*,#347600,.F.); +#347600 = EDGE_CURVE('',#347570,#347359,#347601,.T.); +#347601 = LINE('',#347602,#347603); +#347602 = CARTESIAN_POINT('',(148.18,-82.365,1.51)); +#347603 = VECTOR('',#347604,1.); +#347604 = DIRECTION('',(0.,1.,0.)); +#347605 = PLANE('',#347606); +#347606 = AXIS2_PLACEMENT_3D('',#347607,#347608,#347609); +#347607 = CARTESIAN_POINT('',(148.18,-82.365,1.51)); +#347608 = DIRECTION('',(-1.,0.,0.)); +#347609 = DIRECTION('',(0.,1.,0.)); +#347610 = ADVANCED_FACE('',(#347611),#347621,.F.); +#347611 = FACE_BOUND('',#347612,.T.); +#347612 = EDGE_LOOP('',(#347613,#347614,#347615,#347616,#347617,#347618, + #347619,#347620)); +#347613 = ORIENTED_EDGE('',*,*,#347385,.T.); +#347614 = ORIENTED_EDGE('',*,*,#347417,.T.); +#347615 = ORIENTED_EDGE('',*,*,#347449,.T.); +#347616 = ORIENTED_EDGE('',*,*,#347481,.T.); +#347617 = ORIENTED_EDGE('',*,*,#347513,.T.); +#347618 = ORIENTED_EDGE('',*,*,#347545,.T.); +#347619 = ORIENTED_EDGE('',*,*,#347577,.T.); +#347620 = ORIENTED_EDGE('',*,*,#347600,.T.); +#347621 = PLANE('',#347622); +#347622 = AXIS2_PLACEMENT_3D('',#347623,#347624,#347625); +#347623 = CARTESIAN_POINT('',(0.,0.,1.51)); +#347624 = DIRECTION('',(0.,0.,1.)); +#347625 = DIRECTION('',(1.,0.,-0.)); +#347626 = ADVANCED_FACE('',(#347627),#347637,.T.); +#347627 = FACE_BOUND('',#347628,.F.); +#347628 = EDGE_LOOP('',(#347629,#347630,#347631,#347632,#347633,#347634, + #347635,#347636)); +#347629 = ORIENTED_EDGE('',*,*,#347368,.T.); +#347630 = ORIENTED_EDGE('',*,*,#347401,.T.); +#347631 = ORIENTED_EDGE('',*,*,#347432,.T.); +#347632 = ORIENTED_EDGE('',*,*,#347465,.T.); +#347633 = ORIENTED_EDGE('',*,*,#347496,.T.); +#347634 = ORIENTED_EDGE('',*,*,#347529,.T.); +#347635 = ORIENTED_EDGE('',*,*,#347560,.T.); +#347636 = ORIENTED_EDGE('',*,*,#347593,.T.); +#347637 = PLANE('',#347638); +#347638 = AXIS2_PLACEMENT_3D('',#347639,#347640,#347641); +#347639 = CARTESIAN_POINT('',(0.,0.,1.55)); +#347640 = DIRECTION('',(0.,0.,1.)); +#347641 = DIRECTION('',(1.,0.,-0.)); +#347642 = MANIFOLD_SOLID_BREP('',#347643); +#347643 = CLOSED_SHELL('',(#347644,#347686,#347717,#347750,#347781, + #347814,#347845,#347878,#347900,#347916)); +#347644 = ADVANCED_FACE('',(#347645),#347681,.T.); +#347645 = FACE_BOUND('',#347646,.T.); +#347646 = EDGE_LOOP('',(#347647,#347657,#347666,#347674)); +#347647 = ORIENTED_EDGE('',*,*,#347648,.T.); +#347648 = EDGE_CURVE('',#347649,#347651,#347653,.T.); +#347649 = VERTEX_POINT('',#347650); +#347650 = CARTESIAN_POINT('',(127.13,-67.215,1.51)); +#347651 = VERTEX_POINT('',#347652); +#347652 = CARTESIAN_POINT('',(127.13,-67.215,1.55)); +#347653 = LINE('',#347654,#347655); +#347654 = CARTESIAN_POINT('',(127.13,-67.215,1.51)); +#347655 = VECTOR('',#347656,1.); +#347656 = DIRECTION('',(0.,0.,1.)); +#347657 = ORIENTED_EDGE('',*,*,#347658,.T.); +#347658 = EDGE_CURVE('',#347651,#347659,#347661,.T.); +#347659 = VERTEX_POINT('',#347660); +#347660 = CARTESIAN_POINT('',(127.265,-67.08,1.55)); +#347661 = CIRCLE('',#347662,0.135001418495); +#347662 = AXIS2_PLACEMENT_3D('',#347663,#347664,#347665); +#347663 = CARTESIAN_POINT('',(127.26500141848,-67.21500141848,1.55)); +#347664 = DIRECTION('',(0.,0.,-1.)); +#347665 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#347666 = ORIENTED_EDGE('',*,*,#347667,.F.); +#347667 = EDGE_CURVE('',#347668,#347659,#347670,.T.); +#347668 = VERTEX_POINT('',#347669); +#347669 = CARTESIAN_POINT('',(127.265,-67.08,1.51)); +#347670 = LINE('',#347671,#347672); +#347671 = CARTESIAN_POINT('',(127.265,-67.08,1.51)); +#347672 = VECTOR('',#347673,1.); +#347673 = DIRECTION('',(0.,0.,1.)); +#347674 = ORIENTED_EDGE('',*,*,#347675,.F.); +#347675 = EDGE_CURVE('',#347649,#347668,#347676,.T.); +#347676 = CIRCLE('',#347677,0.135001418495); +#347677 = AXIS2_PLACEMENT_3D('',#347678,#347679,#347680); +#347678 = CARTESIAN_POINT('',(127.26500141848,-67.21500141848,1.51)); +#347679 = DIRECTION('',(0.,0.,-1.)); +#347680 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#347681 = CYLINDRICAL_SURFACE('',#347682,0.135001418495); +#347682 = AXIS2_PLACEMENT_3D('',#347683,#347684,#347685); +#347683 = CARTESIAN_POINT('',(127.26500141848,-67.21500141848,1.51)); +#347684 = DIRECTION('',(0.,0.,-1.)); +#347685 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#347686 = ADVANCED_FACE('',(#347687),#347712,.T.); +#347687 = FACE_BOUND('',#347688,.T.); +#347688 = EDGE_LOOP('',(#347689,#347690,#347698,#347706)); +#347689 = ORIENTED_EDGE('',*,*,#347667,.T.); +#347690 = ORIENTED_EDGE('',*,*,#347691,.T.); +#347691 = EDGE_CURVE('',#347659,#347692,#347694,.T.); +#347692 = VERTEX_POINT('',#347693); +#347693 = CARTESIAN_POINT('',(127.535,-67.08,1.55)); +#347694 = LINE('',#347695,#347696); +#347695 = CARTESIAN_POINT('',(127.265,-67.08,1.55)); +#347696 = VECTOR('',#347697,1.); +#347697 = DIRECTION('',(1.,0.,0.)); +#347698 = ORIENTED_EDGE('',*,*,#347699,.F.); +#347699 = EDGE_CURVE('',#347700,#347692,#347702,.T.); +#347700 = VERTEX_POINT('',#347701); +#347701 = CARTESIAN_POINT('',(127.535,-67.08,1.51)); +#347702 = LINE('',#347703,#347704); +#347703 = CARTESIAN_POINT('',(127.535,-67.08,1.51)); +#347704 = VECTOR('',#347705,1.); +#347705 = DIRECTION('',(0.,0.,1.)); +#347706 = ORIENTED_EDGE('',*,*,#347707,.F.); +#347707 = EDGE_CURVE('',#347668,#347700,#347708,.T.); +#347708 = LINE('',#347709,#347710); +#347709 = CARTESIAN_POINT('',(127.265,-67.08,1.51)); +#347710 = VECTOR('',#347711,1.); +#347711 = DIRECTION('',(1.,0.,0.)); +#347712 = PLANE('',#347713); +#347713 = AXIS2_PLACEMENT_3D('',#347714,#347715,#347716); +#347714 = CARTESIAN_POINT('',(127.265,-67.08,1.51)); +#347715 = DIRECTION('',(0.,1.,0.)); +#347716 = DIRECTION('',(1.,0.,0.)); +#347717 = ADVANCED_FACE('',(#347718),#347745,.T.); +#347718 = FACE_BOUND('',#347719,.T.); +#347719 = EDGE_LOOP('',(#347720,#347721,#347730,#347738)); +#347720 = ORIENTED_EDGE('',*,*,#347699,.T.); +#347721 = ORIENTED_EDGE('',*,*,#347722,.T.); +#347722 = EDGE_CURVE('',#347692,#347723,#347725,.T.); +#347723 = VERTEX_POINT('',#347724); +#347724 = CARTESIAN_POINT('',(127.67,-67.215,1.55)); +#347725 = CIRCLE('',#347726,0.135001418495); +#347726 = AXIS2_PLACEMENT_3D('',#347727,#347728,#347729); +#347727 = CARTESIAN_POINT('',(127.53499858151,-67.21500141848,1.55)); +#347728 = DIRECTION('',(0.,0.,-1.)); +#347729 = DIRECTION('',(1.050720641103E-05,0.999999999945,0.)); +#347730 = ORIENTED_EDGE('',*,*,#347731,.F.); +#347731 = EDGE_CURVE('',#347732,#347723,#347734,.T.); +#347732 = VERTEX_POINT('',#347733); +#347733 = CARTESIAN_POINT('',(127.67,-67.215,1.51)); +#347734 = LINE('',#347735,#347736); +#347735 = CARTESIAN_POINT('',(127.67,-67.215,1.51)); +#347736 = VECTOR('',#347737,1.); +#347737 = DIRECTION('',(0.,0.,1.)); +#347738 = ORIENTED_EDGE('',*,*,#347739,.F.); +#347739 = EDGE_CURVE('',#347700,#347732,#347740,.T.); +#347740 = CIRCLE('',#347741,0.135001418495); +#347741 = AXIS2_PLACEMENT_3D('',#347742,#347743,#347744); +#347742 = CARTESIAN_POINT('',(127.53499858151,-67.21500141848,1.51)); +#347743 = DIRECTION('',(0.,0.,-1.)); +#347744 = DIRECTION('',(1.050720641103E-05,0.999999999945,0.)); +#347745 = CYLINDRICAL_SURFACE('',#347746,0.135001418495); +#347746 = AXIS2_PLACEMENT_3D('',#347747,#347748,#347749); +#347747 = CARTESIAN_POINT('',(127.53499858151,-67.21500141848,1.51)); +#347748 = DIRECTION('',(0.,0.,-1.)); +#347749 = DIRECTION('',(1.050720641103E-05,0.999999999945,0.)); +#347750 = ADVANCED_FACE('',(#347751),#347776,.T.); +#347751 = FACE_BOUND('',#347752,.T.); +#347752 = EDGE_LOOP('',(#347753,#347754,#347762,#347770)); +#347753 = ORIENTED_EDGE('',*,*,#347731,.T.); +#347754 = ORIENTED_EDGE('',*,*,#347755,.T.); +#347755 = EDGE_CURVE('',#347723,#347756,#347758,.T.); +#347756 = VERTEX_POINT('',#347757); +#347757 = CARTESIAN_POINT('',(127.67,-67.585,1.55)); +#347758 = LINE('',#347759,#347760); +#347759 = CARTESIAN_POINT('',(127.67,-67.215,1.55)); +#347760 = VECTOR('',#347761,1.); +#347761 = DIRECTION('',(0.,-1.,0.)); +#347762 = ORIENTED_EDGE('',*,*,#347763,.F.); +#347763 = EDGE_CURVE('',#347764,#347756,#347766,.T.); +#347764 = VERTEX_POINT('',#347765); +#347765 = CARTESIAN_POINT('',(127.67,-67.585,1.51)); +#347766 = LINE('',#347767,#347768); +#347767 = CARTESIAN_POINT('',(127.67,-67.585,1.51)); +#347768 = VECTOR('',#347769,1.); +#347769 = DIRECTION('',(0.,0.,1.)); +#347770 = ORIENTED_EDGE('',*,*,#347771,.F.); +#347771 = EDGE_CURVE('',#347732,#347764,#347772,.T.); +#347772 = LINE('',#347773,#347774); +#347773 = CARTESIAN_POINT('',(127.67,-67.215,1.51)); +#347774 = VECTOR('',#347775,1.); +#347775 = DIRECTION('',(0.,-1.,0.)); +#347776 = PLANE('',#347777); +#347777 = AXIS2_PLACEMENT_3D('',#347778,#347779,#347780); +#347778 = CARTESIAN_POINT('',(127.67,-67.215,1.51)); +#347779 = DIRECTION('',(1.,0.,-0.)); +#347780 = DIRECTION('',(0.,-1.,0.)); +#347781 = ADVANCED_FACE('',(#347782),#347809,.T.); +#347782 = FACE_BOUND('',#347783,.T.); +#347783 = EDGE_LOOP('',(#347784,#347785,#347794,#347802)); +#347784 = ORIENTED_EDGE('',*,*,#347763,.T.); +#347785 = ORIENTED_EDGE('',*,*,#347786,.T.); +#347786 = EDGE_CURVE('',#347756,#347787,#347789,.T.); +#347787 = VERTEX_POINT('',#347788); +#347788 = CARTESIAN_POINT('',(127.535,-67.72,1.55)); +#347789 = CIRCLE('',#347790,0.135001418495); +#347790 = AXIS2_PLACEMENT_3D('',#347791,#347792,#347793); +#347791 = CARTESIAN_POINT('',(127.53499858151,-67.58499858151,1.55)); +#347792 = DIRECTION('',(0.,0.,-1.)); +#347793 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#347794 = ORIENTED_EDGE('',*,*,#347795,.F.); +#347795 = EDGE_CURVE('',#347796,#347787,#347798,.T.); +#347796 = VERTEX_POINT('',#347797); +#347797 = CARTESIAN_POINT('',(127.535,-67.72,1.51)); +#347798 = LINE('',#347799,#347800); +#347799 = CARTESIAN_POINT('',(127.535,-67.72,1.51)); +#347800 = VECTOR('',#347801,1.); +#347801 = DIRECTION('',(0.,0.,1.)); +#347802 = ORIENTED_EDGE('',*,*,#347803,.F.); +#347803 = EDGE_CURVE('',#347764,#347796,#347804,.T.); +#347804 = CIRCLE('',#347805,0.135001418495); +#347805 = AXIS2_PLACEMENT_3D('',#347806,#347807,#347808); +#347806 = CARTESIAN_POINT('',(127.53499858151,-67.58499858151,1.51)); +#347807 = DIRECTION('',(0.,0.,-1.)); +#347808 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#347809 = CYLINDRICAL_SURFACE('',#347810,0.135001418495); +#347810 = AXIS2_PLACEMENT_3D('',#347811,#347812,#347813); +#347811 = CARTESIAN_POINT('',(127.53499858151,-67.58499858151,1.51)); +#347812 = DIRECTION('',(0.,0.,-1.)); +#347813 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#347814 = ADVANCED_FACE('',(#347815),#347840,.T.); +#347815 = FACE_BOUND('',#347816,.T.); +#347816 = EDGE_LOOP('',(#347817,#347818,#347826,#347834)); +#347817 = ORIENTED_EDGE('',*,*,#347795,.T.); +#347818 = ORIENTED_EDGE('',*,*,#347819,.T.); +#347819 = EDGE_CURVE('',#347787,#347820,#347822,.T.); +#347820 = VERTEX_POINT('',#347821); +#347821 = CARTESIAN_POINT('',(127.265,-67.72,1.55)); +#347822 = LINE('',#347823,#347824); +#347823 = CARTESIAN_POINT('',(127.535,-67.72,1.55)); +#347824 = VECTOR('',#347825,1.); +#347825 = DIRECTION('',(-1.,0.,0.)); +#347826 = ORIENTED_EDGE('',*,*,#347827,.F.); +#347827 = EDGE_CURVE('',#347828,#347820,#347830,.T.); +#347828 = VERTEX_POINT('',#347829); +#347829 = CARTESIAN_POINT('',(127.265,-67.72,1.51)); +#347830 = LINE('',#347831,#347832); +#347831 = CARTESIAN_POINT('',(127.265,-67.72,1.51)); +#347832 = VECTOR('',#347833,1.); +#347833 = DIRECTION('',(0.,0.,1.)); +#347834 = ORIENTED_EDGE('',*,*,#347835,.F.); +#347835 = EDGE_CURVE('',#347796,#347828,#347836,.T.); +#347836 = LINE('',#347837,#347838); +#347837 = CARTESIAN_POINT('',(127.535,-67.72,1.51)); +#347838 = VECTOR('',#347839,1.); +#347839 = DIRECTION('',(-1.,0.,0.)); +#347840 = PLANE('',#347841); +#347841 = AXIS2_PLACEMENT_3D('',#347842,#347843,#347844); +#347842 = CARTESIAN_POINT('',(127.535,-67.72,1.51)); +#347843 = DIRECTION('',(0.,-1.,0.)); +#347844 = DIRECTION('',(-1.,0.,0.)); +#347845 = ADVANCED_FACE('',(#347846),#347873,.T.); +#347846 = FACE_BOUND('',#347847,.T.); +#347847 = EDGE_LOOP('',(#347848,#347849,#347858,#347866)); +#347848 = ORIENTED_EDGE('',*,*,#347827,.T.); +#347849 = ORIENTED_EDGE('',*,*,#347850,.T.); +#347850 = EDGE_CURVE('',#347820,#347851,#347853,.T.); +#347851 = VERTEX_POINT('',#347852); +#347852 = CARTESIAN_POINT('',(127.13,-67.585,1.55)); +#347853 = CIRCLE('',#347854,0.135001418495); +#347854 = AXIS2_PLACEMENT_3D('',#347855,#347856,#347857); +#347855 = CARTESIAN_POINT('',(127.26500141848,-67.58499858151,1.55)); +#347856 = DIRECTION('',(0.,0.,-1.)); +#347857 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347858 = ORIENTED_EDGE('',*,*,#347859,.F.); +#347859 = EDGE_CURVE('',#347860,#347851,#347862,.T.); +#347860 = VERTEX_POINT('',#347861); +#347861 = CARTESIAN_POINT('',(127.13,-67.585,1.51)); +#347862 = LINE('',#347863,#347864); +#347863 = CARTESIAN_POINT('',(127.13,-67.585,1.51)); +#347864 = VECTOR('',#347865,1.); +#347865 = DIRECTION('',(0.,0.,1.)); +#347866 = ORIENTED_EDGE('',*,*,#347867,.F.); +#347867 = EDGE_CURVE('',#347828,#347860,#347868,.T.); +#347868 = CIRCLE('',#347869,0.135001418495); +#347869 = AXIS2_PLACEMENT_3D('',#347870,#347871,#347872); +#347870 = CARTESIAN_POINT('',(127.26500141848,-67.58499858151,1.51)); +#347871 = DIRECTION('',(0.,0.,-1.)); +#347872 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347873 = CYLINDRICAL_SURFACE('',#347874,0.135001418495); +#347874 = AXIS2_PLACEMENT_3D('',#347875,#347876,#347877); +#347875 = CARTESIAN_POINT('',(127.26500141848,-67.58499858151,1.51)); +#347876 = DIRECTION('',(0.,0.,-1.)); +#347877 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#347878 = ADVANCED_FACE('',(#347879),#347895,.T.); +#347879 = FACE_BOUND('',#347880,.T.); +#347880 = EDGE_LOOP('',(#347881,#347882,#347888,#347889)); +#347881 = ORIENTED_EDGE('',*,*,#347859,.T.); +#347882 = ORIENTED_EDGE('',*,*,#347883,.T.); +#347883 = EDGE_CURVE('',#347851,#347651,#347884,.T.); +#347884 = LINE('',#347885,#347886); +#347885 = CARTESIAN_POINT('',(127.13,-67.585,1.55)); +#347886 = VECTOR('',#347887,1.); +#347887 = DIRECTION('',(0.,1.,0.)); +#347888 = ORIENTED_EDGE('',*,*,#347648,.F.); +#347889 = ORIENTED_EDGE('',*,*,#347890,.F.); +#347890 = EDGE_CURVE('',#347860,#347649,#347891,.T.); +#347891 = LINE('',#347892,#347893); +#347892 = CARTESIAN_POINT('',(127.13,-67.585,1.51)); +#347893 = VECTOR('',#347894,1.); +#347894 = DIRECTION('',(0.,1.,0.)); +#347895 = PLANE('',#347896); +#347896 = AXIS2_PLACEMENT_3D('',#347897,#347898,#347899); +#347897 = CARTESIAN_POINT('',(127.13,-67.585,1.51)); +#347898 = DIRECTION('',(-1.,0.,0.)); +#347899 = DIRECTION('',(0.,1.,0.)); +#347900 = ADVANCED_FACE('',(#347901),#347911,.F.); +#347901 = FACE_BOUND('',#347902,.T.); +#347902 = EDGE_LOOP('',(#347903,#347904,#347905,#347906,#347907,#347908, + #347909,#347910)); +#347903 = ORIENTED_EDGE('',*,*,#347675,.T.); +#347904 = ORIENTED_EDGE('',*,*,#347707,.T.); +#347905 = ORIENTED_EDGE('',*,*,#347739,.T.); +#347906 = ORIENTED_EDGE('',*,*,#347771,.T.); +#347907 = ORIENTED_EDGE('',*,*,#347803,.T.); +#347908 = ORIENTED_EDGE('',*,*,#347835,.T.); +#347909 = ORIENTED_EDGE('',*,*,#347867,.T.); +#347910 = ORIENTED_EDGE('',*,*,#347890,.T.); +#347911 = PLANE('',#347912); +#347912 = AXIS2_PLACEMENT_3D('',#347913,#347914,#347915); +#347913 = CARTESIAN_POINT('',(0.,0.,1.51)); +#347914 = DIRECTION('',(0.,0.,1.)); +#347915 = DIRECTION('',(1.,0.,-0.)); +#347916 = ADVANCED_FACE('',(#347917),#347927,.T.); +#347917 = FACE_BOUND('',#347918,.F.); +#347918 = EDGE_LOOP('',(#347919,#347920,#347921,#347922,#347923,#347924, + #347925,#347926)); +#347919 = ORIENTED_EDGE('',*,*,#347658,.T.); +#347920 = ORIENTED_EDGE('',*,*,#347691,.T.); +#347921 = ORIENTED_EDGE('',*,*,#347722,.T.); +#347922 = ORIENTED_EDGE('',*,*,#347755,.T.); +#347923 = ORIENTED_EDGE('',*,*,#347786,.T.); +#347924 = ORIENTED_EDGE('',*,*,#347819,.T.); +#347925 = ORIENTED_EDGE('',*,*,#347850,.T.); +#347926 = ORIENTED_EDGE('',*,*,#347883,.T.); +#347927 = PLANE('',#347928); +#347928 = AXIS2_PLACEMENT_3D('',#347929,#347930,#347931); +#347929 = CARTESIAN_POINT('',(0.,0.,1.55)); +#347930 = DIRECTION('',(0.,0.,1.)); +#347931 = DIRECTION('',(1.,0.,-0.)); +#347932 = MANIFOLD_SOLID_BREP('',#347933); +#347933 = CLOSED_SHELL('',(#347934,#347974,#348005,#348036,#348058, + #348070)); +#347934 = ADVANCED_FACE('',(#347935),#347969,.T.); +#347935 = FACE_BOUND('',#347936,.T.); +#347936 = EDGE_LOOP('',(#347937,#347947,#347955,#347963)); +#347937 = ORIENTED_EDGE('',*,*,#347938,.T.); +#347938 = EDGE_CURVE('',#347939,#347941,#347943,.T.); +#347939 = VERTEX_POINT('',#347940); +#347940 = CARTESIAN_POINT('',(128.5,-67.64,1.51)); +#347941 = VERTEX_POINT('',#347942); +#347942 = CARTESIAN_POINT('',(128.5,-67.64,1.55)); +#347943 = LINE('',#347944,#347945); +#347944 = CARTESIAN_POINT('',(128.5,-67.64,1.51)); +#347945 = VECTOR('',#347946,1.); +#347946 = DIRECTION('',(0.,0.,1.)); +#347947 = ORIENTED_EDGE('',*,*,#347948,.T.); +#347948 = EDGE_CURVE('',#347941,#347949,#347951,.T.); +#347949 = VERTEX_POINT('',#347950); +#347950 = CARTESIAN_POINT('',(128.5,-66.74,1.55)); +#347951 = LINE('',#347952,#347953); +#347952 = CARTESIAN_POINT('',(128.5,-67.64,1.55)); +#347953 = VECTOR('',#347954,1.); +#347954 = DIRECTION('',(0.,1.,0.)); +#347955 = ORIENTED_EDGE('',*,*,#347956,.F.); +#347956 = EDGE_CURVE('',#347957,#347949,#347959,.T.); +#347957 = VERTEX_POINT('',#347958); +#347958 = CARTESIAN_POINT('',(128.5,-66.74,1.51)); +#347959 = LINE('',#347960,#347961); +#347960 = CARTESIAN_POINT('',(128.5,-66.74,1.51)); +#347961 = VECTOR('',#347962,1.); +#347962 = DIRECTION('',(0.,0.,1.)); +#347963 = ORIENTED_EDGE('',*,*,#347964,.F.); +#347964 = EDGE_CURVE('',#347939,#347957,#347965,.T.); +#347965 = LINE('',#347966,#347967); +#347966 = CARTESIAN_POINT('',(128.5,-67.64,1.51)); +#347967 = VECTOR('',#347968,1.); +#347968 = DIRECTION('',(0.,1.,0.)); +#347969 = PLANE('',#347970); +#347970 = AXIS2_PLACEMENT_3D('',#347971,#347972,#347973); +#347971 = CARTESIAN_POINT('',(128.5,-67.64,1.51)); +#347972 = DIRECTION('',(-1.,0.,0.)); +#347973 = DIRECTION('',(0.,1.,0.)); +#347974 = ADVANCED_FACE('',(#347975),#348000,.T.); +#347975 = FACE_BOUND('',#347976,.T.); +#347976 = EDGE_LOOP('',(#347977,#347978,#347986,#347994)); +#347977 = ORIENTED_EDGE('',*,*,#347956,.T.); +#347978 = ORIENTED_EDGE('',*,*,#347979,.T.); +#347979 = EDGE_CURVE('',#347949,#347980,#347982,.T.); +#347980 = VERTEX_POINT('',#347981); +#347981 = CARTESIAN_POINT('',(130.,-66.74,1.55)); +#347982 = LINE('',#347983,#347984); +#347983 = CARTESIAN_POINT('',(128.5,-66.74,1.55)); +#347984 = VECTOR('',#347985,1.); +#347985 = DIRECTION('',(1.,0.,0.)); +#347986 = ORIENTED_EDGE('',*,*,#347987,.F.); +#347987 = EDGE_CURVE('',#347988,#347980,#347990,.T.); +#347988 = VERTEX_POINT('',#347989); +#347989 = CARTESIAN_POINT('',(130.,-66.74,1.51)); +#347990 = LINE('',#347991,#347992); +#347991 = CARTESIAN_POINT('',(130.,-66.74,1.51)); +#347992 = VECTOR('',#347993,1.); +#347993 = DIRECTION('',(0.,0.,1.)); +#347994 = ORIENTED_EDGE('',*,*,#347995,.F.); +#347995 = EDGE_CURVE('',#347957,#347988,#347996,.T.); +#347996 = LINE('',#347997,#347998); +#347997 = CARTESIAN_POINT('',(128.5,-66.74,1.51)); +#347998 = VECTOR('',#347999,1.); +#347999 = DIRECTION('',(1.,0.,0.)); +#348000 = PLANE('',#348001); +#348001 = AXIS2_PLACEMENT_3D('',#348002,#348003,#348004); +#348002 = CARTESIAN_POINT('',(128.5,-66.74,1.51)); +#348003 = DIRECTION('',(0.,1.,0.)); +#348004 = DIRECTION('',(1.,0.,0.)); +#348005 = ADVANCED_FACE('',(#348006),#348031,.T.); +#348006 = FACE_BOUND('',#348007,.T.); +#348007 = EDGE_LOOP('',(#348008,#348009,#348017,#348025)); +#348008 = ORIENTED_EDGE('',*,*,#347987,.T.); +#348009 = ORIENTED_EDGE('',*,*,#348010,.T.); +#348010 = EDGE_CURVE('',#347980,#348011,#348013,.T.); +#348011 = VERTEX_POINT('',#348012); +#348012 = CARTESIAN_POINT('',(130.,-67.64,1.55)); +#348013 = LINE('',#348014,#348015); +#348014 = CARTESIAN_POINT('',(130.,-66.74,1.55)); +#348015 = VECTOR('',#348016,1.); +#348016 = DIRECTION('',(0.,-1.,0.)); +#348017 = ORIENTED_EDGE('',*,*,#348018,.F.); +#348018 = EDGE_CURVE('',#348019,#348011,#348021,.T.); +#348019 = VERTEX_POINT('',#348020); +#348020 = CARTESIAN_POINT('',(130.,-67.64,1.51)); +#348021 = LINE('',#348022,#348023); +#348022 = CARTESIAN_POINT('',(130.,-67.64,1.51)); +#348023 = VECTOR('',#348024,1.); +#348024 = DIRECTION('',(0.,0.,1.)); +#348025 = ORIENTED_EDGE('',*,*,#348026,.F.); +#348026 = EDGE_CURVE('',#347988,#348019,#348027,.T.); +#348027 = LINE('',#348028,#348029); +#348028 = CARTESIAN_POINT('',(130.,-66.74,1.51)); +#348029 = VECTOR('',#348030,1.); +#348030 = DIRECTION('',(0.,-1.,0.)); +#348031 = PLANE('',#348032); +#348032 = AXIS2_PLACEMENT_3D('',#348033,#348034,#348035); +#348033 = CARTESIAN_POINT('',(130.,-66.74,1.51)); +#348034 = DIRECTION('',(1.,0.,-0.)); +#348035 = DIRECTION('',(0.,-1.,0.)); +#348036 = ADVANCED_FACE('',(#348037),#348053,.T.); +#348037 = FACE_BOUND('',#348038,.T.); +#348038 = EDGE_LOOP('',(#348039,#348040,#348046,#348047)); +#348039 = ORIENTED_EDGE('',*,*,#348018,.T.); +#348040 = ORIENTED_EDGE('',*,*,#348041,.T.); +#348041 = EDGE_CURVE('',#348011,#347941,#348042,.T.); +#348042 = LINE('',#348043,#348044); +#348043 = CARTESIAN_POINT('',(130.,-67.64,1.55)); +#348044 = VECTOR('',#348045,1.); +#348045 = DIRECTION('',(-1.,0.,0.)); +#348046 = ORIENTED_EDGE('',*,*,#347938,.F.); +#348047 = ORIENTED_EDGE('',*,*,#348048,.F.); +#348048 = EDGE_CURVE('',#348019,#347939,#348049,.T.); +#348049 = LINE('',#348050,#348051); +#348050 = CARTESIAN_POINT('',(130.,-67.64,1.51)); +#348051 = VECTOR('',#348052,1.); +#348052 = DIRECTION('',(-1.,0.,0.)); +#348053 = PLANE('',#348054); +#348054 = AXIS2_PLACEMENT_3D('',#348055,#348056,#348057); +#348055 = CARTESIAN_POINT('',(130.,-67.64,1.51)); +#348056 = DIRECTION('',(0.,-1.,0.)); +#348057 = DIRECTION('',(-1.,0.,0.)); +#348058 = ADVANCED_FACE('',(#348059),#348065,.F.); +#348059 = FACE_BOUND('',#348060,.T.); +#348060 = EDGE_LOOP('',(#348061,#348062,#348063,#348064)); +#348061 = ORIENTED_EDGE('',*,*,#347964,.T.); +#348062 = ORIENTED_EDGE('',*,*,#347995,.T.); +#348063 = ORIENTED_EDGE('',*,*,#348026,.T.); +#348064 = ORIENTED_EDGE('',*,*,#348048,.T.); +#348065 = PLANE('',#348066); +#348066 = AXIS2_PLACEMENT_3D('',#348067,#348068,#348069); +#348067 = CARTESIAN_POINT('',(0.,0.,1.51)); +#348068 = DIRECTION('',(0.,0.,1.)); +#348069 = DIRECTION('',(1.,0.,-0.)); +#348070 = ADVANCED_FACE('',(#348071),#348077,.T.); +#348071 = FACE_BOUND('',#348072,.F.); +#348072 = EDGE_LOOP('',(#348073,#348074,#348075,#348076)); +#348073 = ORIENTED_EDGE('',*,*,#347948,.T.); +#348074 = ORIENTED_EDGE('',*,*,#347979,.T.); +#348075 = ORIENTED_EDGE('',*,*,#348010,.T.); +#348076 = ORIENTED_EDGE('',*,*,#348041,.T.); +#348077 = PLANE('',#348078); +#348078 = AXIS2_PLACEMENT_3D('',#348079,#348080,#348081); +#348079 = CARTESIAN_POINT('',(0.,0.,1.55)); +#348080 = DIRECTION('',(0.,0.,1.)); +#348081 = DIRECTION('',(1.,0.,-0.)); +#348082 = MANIFOLD_SOLID_BREP('',#348083); +#348083 = CLOSED_SHELL('',(#348084,#348124,#348155,#348186,#348208, + #348220)); +#348084 = ADVANCED_FACE('',(#348085),#348119,.T.); +#348085 = FACE_BOUND('',#348086,.T.); +#348086 = EDGE_LOOP('',(#348087,#348097,#348105,#348113)); +#348087 = ORIENTED_EDGE('',*,*,#348088,.T.); +#348088 = EDGE_CURVE('',#348089,#348091,#348093,.T.); +#348089 = VERTEX_POINT('',#348090); +#348090 = CARTESIAN_POINT('',(146.,-67.64,1.51)); +#348091 = VERTEX_POINT('',#348092); +#348092 = CARTESIAN_POINT('',(146.,-67.64,1.55)); +#348093 = LINE('',#348094,#348095); +#348094 = CARTESIAN_POINT('',(146.,-67.64,1.51)); +#348095 = VECTOR('',#348096,1.); +#348096 = DIRECTION('',(0.,0.,1.)); +#348097 = ORIENTED_EDGE('',*,*,#348098,.T.); +#348098 = EDGE_CURVE('',#348091,#348099,#348101,.T.); +#348099 = VERTEX_POINT('',#348100); +#348100 = CARTESIAN_POINT('',(146.,-66.74,1.55)); +#348101 = LINE('',#348102,#348103); +#348102 = CARTESIAN_POINT('',(146.,-67.64,1.55)); +#348103 = VECTOR('',#348104,1.); +#348104 = DIRECTION('',(0.,1.,0.)); +#348105 = ORIENTED_EDGE('',*,*,#348106,.F.); +#348106 = EDGE_CURVE('',#348107,#348099,#348109,.T.); +#348107 = VERTEX_POINT('',#348108); +#348108 = CARTESIAN_POINT('',(146.,-66.74,1.51)); +#348109 = LINE('',#348110,#348111); +#348110 = CARTESIAN_POINT('',(146.,-66.74,1.51)); +#348111 = VECTOR('',#348112,1.); +#348112 = DIRECTION('',(0.,0.,1.)); +#348113 = ORIENTED_EDGE('',*,*,#348114,.F.); +#348114 = EDGE_CURVE('',#348089,#348107,#348115,.T.); +#348115 = LINE('',#348116,#348117); +#348116 = CARTESIAN_POINT('',(146.,-67.64,1.51)); +#348117 = VECTOR('',#348118,1.); +#348118 = DIRECTION('',(0.,1.,0.)); +#348119 = PLANE('',#348120); +#348120 = AXIS2_PLACEMENT_3D('',#348121,#348122,#348123); +#348121 = CARTESIAN_POINT('',(146.,-67.64,1.51)); +#348122 = DIRECTION('',(-1.,0.,0.)); +#348123 = DIRECTION('',(0.,1.,0.)); +#348124 = ADVANCED_FACE('',(#348125),#348150,.T.); +#348125 = FACE_BOUND('',#348126,.T.); +#348126 = EDGE_LOOP('',(#348127,#348128,#348136,#348144)); +#348127 = ORIENTED_EDGE('',*,*,#348106,.T.); +#348128 = ORIENTED_EDGE('',*,*,#348129,.T.); +#348129 = EDGE_CURVE('',#348099,#348130,#348132,.T.); +#348130 = VERTEX_POINT('',#348131); +#348131 = CARTESIAN_POINT('',(147.5,-66.74,1.55)); +#348132 = LINE('',#348133,#348134); +#348133 = CARTESIAN_POINT('',(146.,-66.74,1.55)); +#348134 = VECTOR('',#348135,1.); +#348135 = DIRECTION('',(1.,0.,0.)); +#348136 = ORIENTED_EDGE('',*,*,#348137,.F.); +#348137 = EDGE_CURVE('',#348138,#348130,#348140,.T.); +#348138 = VERTEX_POINT('',#348139); +#348139 = CARTESIAN_POINT('',(147.5,-66.74,1.51)); +#348140 = LINE('',#348141,#348142); +#348141 = CARTESIAN_POINT('',(147.5,-66.74,1.51)); +#348142 = VECTOR('',#348143,1.); +#348143 = DIRECTION('',(0.,0.,1.)); +#348144 = ORIENTED_EDGE('',*,*,#348145,.F.); +#348145 = EDGE_CURVE('',#348107,#348138,#348146,.T.); +#348146 = LINE('',#348147,#348148); +#348147 = CARTESIAN_POINT('',(146.,-66.74,1.51)); +#348148 = VECTOR('',#348149,1.); +#348149 = DIRECTION('',(1.,0.,0.)); +#348150 = PLANE('',#348151); +#348151 = AXIS2_PLACEMENT_3D('',#348152,#348153,#348154); +#348152 = CARTESIAN_POINT('',(146.,-66.74,1.51)); +#348153 = DIRECTION('',(0.,1.,0.)); +#348154 = DIRECTION('',(1.,0.,0.)); +#348155 = ADVANCED_FACE('',(#348156),#348181,.T.); +#348156 = FACE_BOUND('',#348157,.T.); +#348157 = EDGE_LOOP('',(#348158,#348159,#348167,#348175)); +#348158 = ORIENTED_EDGE('',*,*,#348137,.T.); +#348159 = ORIENTED_EDGE('',*,*,#348160,.T.); +#348160 = EDGE_CURVE('',#348130,#348161,#348163,.T.); +#348161 = VERTEX_POINT('',#348162); +#348162 = CARTESIAN_POINT('',(147.5,-67.64,1.55)); +#348163 = LINE('',#348164,#348165); +#348164 = CARTESIAN_POINT('',(147.5,-66.74,1.55)); +#348165 = VECTOR('',#348166,1.); +#348166 = DIRECTION('',(0.,-1.,0.)); +#348167 = ORIENTED_EDGE('',*,*,#348168,.F.); +#348168 = EDGE_CURVE('',#348169,#348161,#348171,.T.); +#348169 = VERTEX_POINT('',#348170); +#348170 = CARTESIAN_POINT('',(147.5,-67.64,1.51)); +#348171 = LINE('',#348172,#348173); +#348172 = CARTESIAN_POINT('',(147.5,-67.64,1.51)); +#348173 = VECTOR('',#348174,1.); +#348174 = DIRECTION('',(0.,0.,1.)); +#348175 = ORIENTED_EDGE('',*,*,#348176,.F.); +#348176 = EDGE_CURVE('',#348138,#348169,#348177,.T.); +#348177 = LINE('',#348178,#348179); +#348178 = CARTESIAN_POINT('',(147.5,-66.74,1.51)); +#348179 = VECTOR('',#348180,1.); +#348180 = DIRECTION('',(0.,-1.,0.)); +#348181 = PLANE('',#348182); +#348182 = AXIS2_PLACEMENT_3D('',#348183,#348184,#348185); +#348183 = CARTESIAN_POINT('',(147.5,-66.74,1.51)); +#348184 = DIRECTION('',(1.,0.,-0.)); +#348185 = DIRECTION('',(0.,-1.,0.)); +#348186 = ADVANCED_FACE('',(#348187),#348203,.T.); +#348187 = FACE_BOUND('',#348188,.T.); +#348188 = EDGE_LOOP('',(#348189,#348190,#348196,#348197)); +#348189 = ORIENTED_EDGE('',*,*,#348168,.T.); +#348190 = ORIENTED_EDGE('',*,*,#348191,.T.); +#348191 = EDGE_CURVE('',#348161,#348091,#348192,.T.); +#348192 = LINE('',#348193,#348194); +#348193 = CARTESIAN_POINT('',(147.5,-67.64,1.55)); +#348194 = VECTOR('',#348195,1.); +#348195 = DIRECTION('',(-1.,0.,0.)); +#348196 = ORIENTED_EDGE('',*,*,#348088,.F.); +#348197 = ORIENTED_EDGE('',*,*,#348198,.F.); +#348198 = EDGE_CURVE('',#348169,#348089,#348199,.T.); +#348199 = LINE('',#348200,#348201); +#348200 = CARTESIAN_POINT('',(147.5,-67.64,1.51)); +#348201 = VECTOR('',#348202,1.); +#348202 = DIRECTION('',(-1.,0.,0.)); +#348203 = PLANE('',#348204); +#348204 = AXIS2_PLACEMENT_3D('',#348205,#348206,#348207); +#348205 = CARTESIAN_POINT('',(147.5,-67.64,1.51)); +#348206 = DIRECTION('',(0.,-1.,0.)); +#348207 = DIRECTION('',(-1.,0.,0.)); +#348208 = ADVANCED_FACE('',(#348209),#348215,.F.); +#348209 = FACE_BOUND('',#348210,.T.); +#348210 = EDGE_LOOP('',(#348211,#348212,#348213,#348214)); +#348211 = ORIENTED_EDGE('',*,*,#348114,.T.); +#348212 = ORIENTED_EDGE('',*,*,#348145,.T.); +#348213 = ORIENTED_EDGE('',*,*,#348176,.T.); +#348214 = ORIENTED_EDGE('',*,*,#348198,.T.); +#348215 = PLANE('',#348216); +#348216 = AXIS2_PLACEMENT_3D('',#348217,#348218,#348219); +#348217 = CARTESIAN_POINT('',(0.,0.,1.51)); +#348218 = DIRECTION('',(0.,0.,1.)); +#348219 = DIRECTION('',(1.,0.,-0.)); +#348220 = ADVANCED_FACE('',(#348221),#348227,.T.); +#348221 = FACE_BOUND('',#348222,.F.); +#348222 = EDGE_LOOP('',(#348223,#348224,#348225,#348226)); +#348223 = ORIENTED_EDGE('',*,*,#348098,.T.); +#348224 = ORIENTED_EDGE('',*,*,#348129,.T.); +#348225 = ORIENTED_EDGE('',*,*,#348160,.T.); +#348226 = ORIENTED_EDGE('',*,*,#348191,.T.); +#348227 = PLANE('',#348228); +#348228 = AXIS2_PLACEMENT_3D('',#348229,#348230,#348231); +#348229 = CARTESIAN_POINT('',(0.,0.,1.55)); +#348230 = DIRECTION('',(0.,0.,1.)); +#348231 = DIRECTION('',(1.,0.,-0.)); +#348232 = MANIFOLD_SOLID_BREP('',#348233); +#348233 = CLOSED_SHELL('',(#348234,#348276,#348307,#348340,#348371, + #348404,#348435,#348468,#348490,#348506)); +#348234 = ADVANCED_FACE('',(#348235),#348271,.T.); +#348235 = FACE_BOUND('',#348236,.T.); +#348236 = EDGE_LOOP('',(#348237,#348247,#348256,#348264)); +#348237 = ORIENTED_EDGE('',*,*,#348238,.T.); +#348238 = EDGE_CURVE('',#348239,#348241,#348243,.T.); +#348239 = VERTEX_POINT('',#348240); +#348240 = CARTESIAN_POINT('',(126.19,-154.34,1.51)); +#348241 = VERTEX_POINT('',#348242); +#348242 = CARTESIAN_POINT('',(126.19,-154.34,1.55)); +#348243 = LINE('',#348244,#348245); +#348244 = CARTESIAN_POINT('',(126.19,-154.34,1.51)); +#348245 = VECTOR('',#348246,1.); +#348246 = DIRECTION('',(0.,0.,1.)); +#348247 = ORIENTED_EDGE('',*,*,#348248,.T.); +#348248 = EDGE_CURVE('',#348241,#348249,#348251,.T.); +#348249 = VERTEX_POINT('',#348250); +#348250 = CARTESIAN_POINT('',(126.33,-154.2,1.55)); +#348251 = CIRCLE('',#348252,0.139999827125); +#348252 = AXIS2_PLACEMENT_3D('',#348253,#348254,#348255); +#348253 = CARTESIAN_POINT('',(126.32999982712,-154.3399998271,1.55)); +#348254 = DIRECTION('',(0.,0.,-1.)); +#348255 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#348256 = ORIENTED_EDGE('',*,*,#348257,.F.); +#348257 = EDGE_CURVE('',#348258,#348249,#348260,.T.); +#348258 = VERTEX_POINT('',#348259); +#348259 = CARTESIAN_POINT('',(126.33,-154.2,1.51)); +#348260 = LINE('',#348261,#348262); +#348261 = CARTESIAN_POINT('',(126.33,-154.2,1.51)); +#348262 = VECTOR('',#348263,1.); +#348263 = DIRECTION('',(0.,0.,1.)); +#348264 = ORIENTED_EDGE('',*,*,#348265,.F.); +#348265 = EDGE_CURVE('',#348239,#348258,#348266,.T.); +#348266 = CIRCLE('',#348267,0.139999827125); +#348267 = AXIS2_PLACEMENT_3D('',#348268,#348269,#348270); +#348268 = CARTESIAN_POINT('',(126.32999982712,-154.3399998271,1.51)); +#348269 = DIRECTION('',(0.,0.,-1.)); +#348270 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#348271 = CYLINDRICAL_SURFACE('',#348272,0.139999827125); +#348272 = AXIS2_PLACEMENT_3D('',#348273,#348274,#348275); +#348273 = CARTESIAN_POINT('',(126.32999982712,-154.3399998271,1.51)); +#348274 = DIRECTION('',(0.,0.,-1.)); +#348275 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#348276 = ADVANCED_FACE('',(#348277),#348302,.T.); +#348277 = FACE_BOUND('',#348278,.T.); +#348278 = EDGE_LOOP('',(#348279,#348280,#348288,#348296)); +#348279 = ORIENTED_EDGE('',*,*,#348257,.T.); +#348280 = ORIENTED_EDGE('',*,*,#348281,.T.); +#348281 = EDGE_CURVE('',#348249,#348282,#348284,.T.); +#348282 = VERTEX_POINT('',#348283); +#348283 = CARTESIAN_POINT('',(126.67,-154.2,1.55)); +#348284 = LINE('',#348285,#348286); +#348285 = CARTESIAN_POINT('',(126.33,-154.2,1.55)); +#348286 = VECTOR('',#348287,1.); +#348287 = DIRECTION('',(1.,0.,0.)); +#348288 = ORIENTED_EDGE('',*,*,#348289,.F.); +#348289 = EDGE_CURVE('',#348290,#348282,#348292,.T.); +#348290 = VERTEX_POINT('',#348291); +#348291 = CARTESIAN_POINT('',(126.67,-154.2,1.51)); +#348292 = LINE('',#348293,#348294); +#348293 = CARTESIAN_POINT('',(126.67,-154.2,1.51)); +#348294 = VECTOR('',#348295,1.); +#348295 = DIRECTION('',(0.,0.,1.)); +#348296 = ORIENTED_EDGE('',*,*,#348297,.F.); +#348297 = EDGE_CURVE('',#348258,#348290,#348298,.T.); +#348298 = LINE('',#348299,#348300); +#348299 = CARTESIAN_POINT('',(126.33,-154.2,1.51)); +#348300 = VECTOR('',#348301,1.); +#348301 = DIRECTION('',(1.,0.,0.)); +#348302 = PLANE('',#348303); +#348303 = AXIS2_PLACEMENT_3D('',#348304,#348305,#348306); +#348304 = CARTESIAN_POINT('',(126.33,-154.2,1.51)); +#348305 = DIRECTION('',(0.,1.,0.)); +#348306 = DIRECTION('',(1.,0.,0.)); +#348307 = ADVANCED_FACE('',(#348308),#348335,.T.); +#348308 = FACE_BOUND('',#348309,.T.); +#348309 = EDGE_LOOP('',(#348310,#348311,#348320,#348328)); +#348310 = ORIENTED_EDGE('',*,*,#348289,.T.); +#348311 = ORIENTED_EDGE('',*,*,#348312,.T.); +#348312 = EDGE_CURVE('',#348282,#348313,#348315,.T.); +#348313 = VERTEX_POINT('',#348314); +#348314 = CARTESIAN_POINT('',(126.81,-154.34,1.55)); +#348315 = CIRCLE('',#348316,0.139999827125); +#348316 = AXIS2_PLACEMENT_3D('',#348317,#348318,#348319); +#348317 = CARTESIAN_POINT('',(126.67000017287,-154.3399998271,1.55)); +#348318 = DIRECTION('',(0.,0.,-1.)); +#348319 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#348320 = ORIENTED_EDGE('',*,*,#348321,.F.); +#348321 = EDGE_CURVE('',#348322,#348313,#348324,.T.); +#348322 = VERTEX_POINT('',#348323); +#348323 = CARTESIAN_POINT('',(126.81,-154.34,1.51)); +#348324 = LINE('',#348325,#348326); +#348325 = CARTESIAN_POINT('',(126.81,-154.34,1.51)); +#348326 = VECTOR('',#348327,1.); +#348327 = DIRECTION('',(0.,0.,1.)); +#348328 = ORIENTED_EDGE('',*,*,#348329,.F.); +#348329 = EDGE_CURVE('',#348290,#348322,#348330,.T.); +#348330 = CIRCLE('',#348331,0.139999827125); +#348331 = AXIS2_PLACEMENT_3D('',#348332,#348333,#348334); +#348332 = CARTESIAN_POINT('',(126.67000017287,-154.3399998271,1.51)); +#348333 = DIRECTION('',(0.,0.,-1.)); +#348334 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#348335 = CYLINDRICAL_SURFACE('',#348336,0.139999827125); +#348336 = AXIS2_PLACEMENT_3D('',#348337,#348338,#348339); +#348337 = CARTESIAN_POINT('',(126.67000017287,-154.3399998271,1.51)); +#348338 = DIRECTION('',(0.,0.,-1.)); +#348339 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#348340 = ADVANCED_FACE('',(#348341),#348366,.T.); +#348341 = FACE_BOUND('',#348342,.T.); +#348342 = EDGE_LOOP('',(#348343,#348344,#348352,#348360)); +#348343 = ORIENTED_EDGE('',*,*,#348321,.T.); +#348344 = ORIENTED_EDGE('',*,*,#348345,.T.); +#348345 = EDGE_CURVE('',#348313,#348346,#348348,.T.); +#348346 = VERTEX_POINT('',#348347); +#348347 = CARTESIAN_POINT('',(126.81,-154.62,1.55)); +#348348 = LINE('',#348349,#348350); +#348349 = CARTESIAN_POINT('',(126.81,-154.34,1.55)); +#348350 = VECTOR('',#348351,1.); +#348351 = DIRECTION('',(0.,-1.,0.)); +#348352 = ORIENTED_EDGE('',*,*,#348353,.F.); +#348353 = EDGE_CURVE('',#348354,#348346,#348356,.T.); +#348354 = VERTEX_POINT('',#348355); +#348355 = CARTESIAN_POINT('',(126.81,-154.62,1.51)); +#348356 = LINE('',#348357,#348358); +#348357 = CARTESIAN_POINT('',(126.81,-154.62,1.51)); +#348358 = VECTOR('',#348359,1.); +#348359 = DIRECTION('',(0.,0.,1.)); +#348360 = ORIENTED_EDGE('',*,*,#348361,.F.); +#348361 = EDGE_CURVE('',#348322,#348354,#348362,.T.); +#348362 = LINE('',#348363,#348364); +#348363 = CARTESIAN_POINT('',(126.81,-154.34,1.51)); +#348364 = VECTOR('',#348365,1.); +#348365 = DIRECTION('',(0.,-1.,0.)); +#348366 = PLANE('',#348367); +#348367 = AXIS2_PLACEMENT_3D('',#348368,#348369,#348370); +#348368 = CARTESIAN_POINT('',(126.81,-154.34,1.51)); +#348369 = DIRECTION('',(1.,0.,-0.)); +#348370 = DIRECTION('',(0.,-1.,0.)); +#348371 = ADVANCED_FACE('',(#348372),#348399,.T.); +#348372 = FACE_BOUND('',#348373,.T.); +#348373 = EDGE_LOOP('',(#348374,#348375,#348384,#348392)); +#348374 = ORIENTED_EDGE('',*,*,#348353,.T.); +#348375 = ORIENTED_EDGE('',*,*,#348376,.T.); +#348376 = EDGE_CURVE('',#348346,#348377,#348379,.T.); +#348377 = VERTEX_POINT('',#348378); +#348378 = CARTESIAN_POINT('',(126.67,-154.76,1.55)); +#348379 = CIRCLE('',#348380,0.139999827125); +#348380 = AXIS2_PLACEMENT_3D('',#348381,#348382,#348383); +#348381 = CARTESIAN_POINT('',(126.67000017287,-154.6200001728,1.55)); +#348382 = DIRECTION('',(0.,0.,-1.)); +#348383 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#348384 = ORIENTED_EDGE('',*,*,#348385,.F.); +#348385 = EDGE_CURVE('',#348386,#348377,#348388,.T.); +#348386 = VERTEX_POINT('',#348387); +#348387 = CARTESIAN_POINT('',(126.67,-154.76,1.51)); +#348388 = LINE('',#348389,#348390); +#348389 = CARTESIAN_POINT('',(126.67,-154.76,1.51)); +#348390 = VECTOR('',#348391,1.); +#348391 = DIRECTION('',(0.,0.,1.)); +#348392 = ORIENTED_EDGE('',*,*,#348393,.F.); +#348393 = EDGE_CURVE('',#348354,#348386,#348394,.T.); +#348394 = CIRCLE('',#348395,0.139999827125); +#348395 = AXIS2_PLACEMENT_3D('',#348396,#348397,#348398); +#348396 = CARTESIAN_POINT('',(126.67000017287,-154.6200001728,1.51)); +#348397 = DIRECTION('',(0.,0.,-1.)); +#348398 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#348399 = CYLINDRICAL_SURFACE('',#348400,0.139999827125); +#348400 = AXIS2_PLACEMENT_3D('',#348401,#348402,#348403); +#348401 = CARTESIAN_POINT('',(126.67000017287,-154.6200001728,1.51)); +#348402 = DIRECTION('',(0.,0.,-1.)); +#348403 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#348404 = ADVANCED_FACE('',(#348405),#348430,.T.); +#348405 = FACE_BOUND('',#348406,.T.); +#348406 = EDGE_LOOP('',(#348407,#348408,#348416,#348424)); +#348407 = ORIENTED_EDGE('',*,*,#348385,.T.); +#348408 = ORIENTED_EDGE('',*,*,#348409,.T.); +#348409 = EDGE_CURVE('',#348377,#348410,#348412,.T.); +#348410 = VERTEX_POINT('',#348411); +#348411 = CARTESIAN_POINT('',(126.33,-154.76,1.55)); +#348412 = LINE('',#348413,#348414); +#348413 = CARTESIAN_POINT('',(126.67,-154.76,1.55)); +#348414 = VECTOR('',#348415,1.); +#348415 = DIRECTION('',(-1.,0.,0.)); +#348416 = ORIENTED_EDGE('',*,*,#348417,.F.); +#348417 = EDGE_CURVE('',#348418,#348410,#348420,.T.); +#348418 = VERTEX_POINT('',#348419); +#348419 = CARTESIAN_POINT('',(126.33,-154.76,1.51)); +#348420 = LINE('',#348421,#348422); +#348421 = CARTESIAN_POINT('',(126.33,-154.76,1.51)); +#348422 = VECTOR('',#348423,1.); +#348423 = DIRECTION('',(0.,0.,1.)); +#348424 = ORIENTED_EDGE('',*,*,#348425,.F.); +#348425 = EDGE_CURVE('',#348386,#348418,#348426,.T.); +#348426 = LINE('',#348427,#348428); +#348427 = CARTESIAN_POINT('',(126.67,-154.76,1.51)); +#348428 = VECTOR('',#348429,1.); +#348429 = DIRECTION('',(-1.,0.,0.)); +#348430 = PLANE('',#348431); +#348431 = AXIS2_PLACEMENT_3D('',#348432,#348433,#348434); +#348432 = CARTESIAN_POINT('',(126.67,-154.76,1.51)); +#348433 = DIRECTION('',(0.,-1.,0.)); +#348434 = DIRECTION('',(-1.,0.,0.)); +#348435 = ADVANCED_FACE('',(#348436),#348463,.T.); +#348436 = FACE_BOUND('',#348437,.T.); +#348437 = EDGE_LOOP('',(#348438,#348439,#348448,#348456)); +#348438 = ORIENTED_EDGE('',*,*,#348417,.T.); +#348439 = ORIENTED_EDGE('',*,*,#348440,.T.); +#348440 = EDGE_CURVE('',#348410,#348441,#348443,.T.); +#348441 = VERTEX_POINT('',#348442); +#348442 = CARTESIAN_POINT('',(126.19,-154.62,1.55)); +#348443 = CIRCLE('',#348444,0.139999827125); +#348444 = AXIS2_PLACEMENT_3D('',#348445,#348446,#348447); +#348445 = CARTESIAN_POINT('',(126.32999982712,-154.6200001728,1.55)); +#348446 = DIRECTION('',(0.,0.,-1.)); +#348447 = DIRECTION('',(1.23482055276E-06,-0.999999999999,0.)); +#348448 = ORIENTED_EDGE('',*,*,#348449,.F.); +#348449 = EDGE_CURVE('',#348450,#348441,#348452,.T.); +#348450 = VERTEX_POINT('',#348451); +#348451 = CARTESIAN_POINT('',(126.19,-154.62,1.51)); +#348452 = LINE('',#348453,#348454); +#348453 = CARTESIAN_POINT('',(126.19,-154.62,1.51)); +#348454 = VECTOR('',#348455,1.); +#348455 = DIRECTION('',(0.,0.,1.)); +#348456 = ORIENTED_EDGE('',*,*,#348457,.F.); +#348457 = EDGE_CURVE('',#348418,#348450,#348458,.T.); +#348458 = CIRCLE('',#348459,0.139999827125); +#348459 = AXIS2_PLACEMENT_3D('',#348460,#348461,#348462); +#348460 = CARTESIAN_POINT('',(126.32999982712,-154.6200001728,1.51)); +#348461 = DIRECTION('',(0.,0.,-1.)); +#348462 = DIRECTION('',(1.23482055276E-06,-0.999999999999,0.)); +#348463 = CYLINDRICAL_SURFACE('',#348464,0.139999827125); +#348464 = AXIS2_PLACEMENT_3D('',#348465,#348466,#348467); +#348465 = CARTESIAN_POINT('',(126.32999982712,-154.6200001728,1.51)); +#348466 = DIRECTION('',(0.,0.,-1.)); +#348467 = DIRECTION('',(1.23482055276E-06,-0.999999999999,0.)); +#348468 = ADVANCED_FACE('',(#348469),#348485,.T.); +#348469 = FACE_BOUND('',#348470,.T.); +#348470 = EDGE_LOOP('',(#348471,#348472,#348478,#348479)); +#348471 = ORIENTED_EDGE('',*,*,#348449,.T.); +#348472 = ORIENTED_EDGE('',*,*,#348473,.T.); +#348473 = EDGE_CURVE('',#348441,#348241,#348474,.T.); +#348474 = LINE('',#348475,#348476); +#348475 = CARTESIAN_POINT('',(126.19,-154.62,1.55)); +#348476 = VECTOR('',#348477,1.); +#348477 = DIRECTION('',(0.,1.,0.)); +#348478 = ORIENTED_EDGE('',*,*,#348238,.F.); +#348479 = ORIENTED_EDGE('',*,*,#348480,.F.); +#348480 = EDGE_CURVE('',#348450,#348239,#348481,.T.); +#348481 = LINE('',#348482,#348483); +#348482 = CARTESIAN_POINT('',(126.19,-154.62,1.51)); +#348483 = VECTOR('',#348484,1.); +#348484 = DIRECTION('',(0.,1.,0.)); +#348485 = PLANE('',#348486); +#348486 = AXIS2_PLACEMENT_3D('',#348487,#348488,#348489); +#348487 = CARTESIAN_POINT('',(126.19,-154.62,1.51)); +#348488 = DIRECTION('',(-1.,0.,0.)); +#348489 = DIRECTION('',(0.,1.,0.)); +#348490 = ADVANCED_FACE('',(#348491),#348501,.F.); +#348491 = FACE_BOUND('',#348492,.T.); +#348492 = EDGE_LOOP('',(#348493,#348494,#348495,#348496,#348497,#348498, + #348499,#348500)); +#348493 = ORIENTED_EDGE('',*,*,#348265,.T.); +#348494 = ORIENTED_EDGE('',*,*,#348297,.T.); +#348495 = ORIENTED_EDGE('',*,*,#348329,.T.); +#348496 = ORIENTED_EDGE('',*,*,#348361,.T.); +#348497 = ORIENTED_EDGE('',*,*,#348393,.T.); +#348498 = ORIENTED_EDGE('',*,*,#348425,.T.); +#348499 = ORIENTED_EDGE('',*,*,#348457,.T.); +#348500 = ORIENTED_EDGE('',*,*,#348480,.T.); +#348501 = PLANE('',#348502); +#348502 = AXIS2_PLACEMENT_3D('',#348503,#348504,#348505); +#348503 = CARTESIAN_POINT('',(0.,0.,1.51)); +#348504 = DIRECTION('',(0.,0.,1.)); +#348505 = DIRECTION('',(1.,0.,-0.)); +#348506 = ADVANCED_FACE('',(#348507),#348517,.T.); +#348507 = FACE_BOUND('',#348508,.F.); +#348508 = EDGE_LOOP('',(#348509,#348510,#348511,#348512,#348513,#348514, + #348515,#348516)); +#348509 = ORIENTED_EDGE('',*,*,#348248,.T.); +#348510 = ORIENTED_EDGE('',*,*,#348281,.T.); +#348511 = ORIENTED_EDGE('',*,*,#348312,.T.); +#348512 = ORIENTED_EDGE('',*,*,#348345,.T.); +#348513 = ORIENTED_EDGE('',*,*,#348376,.T.); +#348514 = ORIENTED_EDGE('',*,*,#348409,.T.); +#348515 = ORIENTED_EDGE('',*,*,#348440,.T.); +#348516 = ORIENTED_EDGE('',*,*,#348473,.T.); +#348517 = PLANE('',#348518); +#348518 = AXIS2_PLACEMENT_3D('',#348519,#348520,#348521); +#348519 = CARTESIAN_POINT('',(0.,0.,1.55)); +#348520 = DIRECTION('',(0.,0.,1.)); +#348521 = DIRECTION('',(1.,0.,-0.)); +#348522 = MANIFOLD_SOLID_BREP('',#348523); +#348523 = CLOSED_SHELL('',(#348524,#348566,#348597,#348630,#348661, + #348694,#348725,#348758,#348780,#348796)); +#348524 = ADVANCED_FACE('',(#348525),#348561,.T.); +#348525 = FACE_BOUND('',#348526,.T.); +#348526 = EDGE_LOOP('',(#348527,#348537,#348546,#348554)); +#348527 = ORIENTED_EDGE('',*,*,#348528,.T.); +#348528 = EDGE_CURVE('',#348529,#348531,#348533,.T.); +#348529 = VERTEX_POINT('',#348530); +#348530 = CARTESIAN_POINT('',(127.4,-156.3375,1.51)); +#348531 = VERTEX_POINT('',#348532); +#348532 = CARTESIAN_POINT('',(127.4,-156.3375,1.55)); +#348533 = LINE('',#348534,#348535); +#348534 = CARTESIAN_POINT('',(127.4,-156.3375,1.51)); +#348535 = VECTOR('',#348536,1.); +#348536 = DIRECTION('',(0.,0.,1.)); +#348537 = ORIENTED_EDGE('',*,*,#348538,.T.); +#348538 = EDGE_CURVE('',#348531,#348539,#348541,.T.); +#348539 = VERTEX_POINT('',#348540); +#348540 = CARTESIAN_POINT('',(127.5875,-156.15,1.55)); +#348541 = CIRCLE('',#348542,0.187498366229); +#348542 = AXIS2_PLACEMENT_3D('',#348543,#348544,#348545); +#348543 = CARTESIAN_POINT('',(127.58749836622,-156.3374983662,1.55)); +#348544 = DIRECTION('',(0.,0.,-1.)); +#348545 = DIRECTION('',(-0.999999999962,-8.713558582297E-06,-0.)); +#348546 = ORIENTED_EDGE('',*,*,#348547,.F.); +#348547 = EDGE_CURVE('',#348548,#348539,#348550,.T.); +#348548 = VERTEX_POINT('',#348549); +#348549 = CARTESIAN_POINT('',(127.5875,-156.15,1.51)); +#348550 = LINE('',#348551,#348552); +#348551 = CARTESIAN_POINT('',(127.5875,-156.15,1.51)); +#348552 = VECTOR('',#348553,1.); +#348553 = DIRECTION('',(0.,0.,1.)); +#348554 = ORIENTED_EDGE('',*,*,#348555,.F.); +#348555 = EDGE_CURVE('',#348529,#348548,#348556,.T.); +#348556 = CIRCLE('',#348557,0.187498366229); +#348557 = AXIS2_PLACEMENT_3D('',#348558,#348559,#348560); +#348558 = CARTESIAN_POINT('',(127.58749836622,-156.3374983662,1.51)); +#348559 = DIRECTION('',(0.,0.,-1.)); +#348560 = DIRECTION('',(-0.999999999962,-8.713558582297E-06,-0.)); +#348561 = CYLINDRICAL_SURFACE('',#348562,0.187498366229); +#348562 = AXIS2_PLACEMENT_3D('',#348563,#348564,#348565); +#348563 = CARTESIAN_POINT('',(127.58749836622,-156.3374983662,1.51)); +#348564 = DIRECTION('',(0.,0.,-1.)); +#348565 = DIRECTION('',(-0.999999999962,-8.713558582297E-06,-0.)); +#348566 = ADVANCED_FACE('',(#348567),#348592,.T.); +#348567 = FACE_BOUND('',#348568,.T.); +#348568 = EDGE_LOOP('',(#348569,#348570,#348578,#348586)); +#348569 = ORIENTED_EDGE('',*,*,#348547,.T.); +#348570 = ORIENTED_EDGE('',*,*,#348571,.T.); +#348571 = EDGE_CURVE('',#348539,#348572,#348574,.T.); +#348572 = VERTEX_POINT('',#348573); +#348573 = CARTESIAN_POINT('',(127.9625,-156.15,1.55)); +#348574 = LINE('',#348575,#348576); +#348575 = CARTESIAN_POINT('',(127.5875,-156.15,1.55)); +#348576 = VECTOR('',#348577,1.); +#348577 = DIRECTION('',(1.,0.,0.)); +#348578 = ORIENTED_EDGE('',*,*,#348579,.F.); +#348579 = EDGE_CURVE('',#348580,#348572,#348582,.T.); +#348580 = VERTEX_POINT('',#348581); +#348581 = CARTESIAN_POINT('',(127.9625,-156.15,1.51)); +#348582 = LINE('',#348583,#348584); +#348583 = CARTESIAN_POINT('',(127.9625,-156.15,1.51)); +#348584 = VECTOR('',#348585,1.); +#348585 = DIRECTION('',(0.,0.,1.)); +#348586 = ORIENTED_EDGE('',*,*,#348587,.F.); +#348587 = EDGE_CURVE('',#348548,#348580,#348588,.T.); +#348588 = LINE('',#348589,#348590); +#348589 = CARTESIAN_POINT('',(127.5875,-156.15,1.51)); +#348590 = VECTOR('',#348591,1.); +#348591 = DIRECTION('',(1.,0.,0.)); +#348592 = PLANE('',#348593); +#348593 = AXIS2_PLACEMENT_3D('',#348594,#348595,#348596); +#348594 = CARTESIAN_POINT('',(127.5875,-156.15,1.51)); +#348595 = DIRECTION('',(0.,1.,0.)); +#348596 = DIRECTION('',(1.,0.,0.)); +#348597 = ADVANCED_FACE('',(#348598),#348625,.T.); +#348598 = FACE_BOUND('',#348599,.T.); +#348599 = EDGE_LOOP('',(#348600,#348601,#348610,#348618)); +#348600 = ORIENTED_EDGE('',*,*,#348579,.T.); +#348601 = ORIENTED_EDGE('',*,*,#348602,.T.); +#348602 = EDGE_CURVE('',#348572,#348603,#348605,.T.); +#348603 = VERTEX_POINT('',#348604); +#348604 = CARTESIAN_POINT('',(128.15,-156.3375,1.55)); +#348605 = CIRCLE('',#348606,0.187498366229); +#348606 = AXIS2_PLACEMENT_3D('',#348607,#348608,#348609); +#348607 = CARTESIAN_POINT('',(127.96250163377,-156.3374983662,1.55)); +#348608 = DIRECTION('',(0.,0.,-1.)); +#348609 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#348610 = ORIENTED_EDGE('',*,*,#348611,.F.); +#348611 = EDGE_CURVE('',#348612,#348603,#348614,.T.); +#348612 = VERTEX_POINT('',#348613); +#348613 = CARTESIAN_POINT('',(128.15,-156.3375,1.51)); +#348614 = LINE('',#348615,#348616); +#348615 = CARTESIAN_POINT('',(128.15,-156.3375,1.51)); +#348616 = VECTOR('',#348617,1.); +#348617 = DIRECTION('',(0.,0.,1.)); +#348618 = ORIENTED_EDGE('',*,*,#348619,.F.); +#348619 = EDGE_CURVE('',#348580,#348612,#348620,.T.); +#348620 = CIRCLE('',#348621,0.187498366229); +#348621 = AXIS2_PLACEMENT_3D('',#348622,#348623,#348624); +#348622 = CARTESIAN_POINT('',(127.96250163377,-156.3374983662,1.51)); +#348623 = DIRECTION('',(0.,0.,-1.)); +#348624 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#348625 = CYLINDRICAL_SURFACE('',#348626,0.187498366229); +#348626 = AXIS2_PLACEMENT_3D('',#348627,#348628,#348629); +#348627 = CARTESIAN_POINT('',(127.96250163377,-156.3374983662,1.51)); +#348628 = DIRECTION('',(0.,0.,-1.)); +#348629 = DIRECTION('',(-8.713558430711E-06,0.999999999962,0.)); +#348630 = ADVANCED_FACE('',(#348631),#348656,.T.); +#348631 = FACE_BOUND('',#348632,.T.); +#348632 = EDGE_LOOP('',(#348633,#348634,#348642,#348650)); +#348633 = ORIENTED_EDGE('',*,*,#348611,.T.); +#348634 = ORIENTED_EDGE('',*,*,#348635,.T.); +#348635 = EDGE_CURVE('',#348603,#348636,#348638,.T.); +#348636 = VERTEX_POINT('',#348637); +#348637 = CARTESIAN_POINT('',(128.15,-157.7625,1.55)); +#348638 = LINE('',#348639,#348640); +#348639 = CARTESIAN_POINT('',(128.15,-156.3375,1.55)); +#348640 = VECTOR('',#348641,1.); +#348641 = DIRECTION('',(0.,-1.,0.)); +#348642 = ORIENTED_EDGE('',*,*,#348643,.F.); +#348643 = EDGE_CURVE('',#348644,#348636,#348646,.T.); +#348644 = VERTEX_POINT('',#348645); +#348645 = CARTESIAN_POINT('',(128.15,-157.7625,1.51)); +#348646 = LINE('',#348647,#348648); +#348647 = CARTESIAN_POINT('',(128.15,-157.7625,1.51)); +#348648 = VECTOR('',#348649,1.); +#348649 = DIRECTION('',(0.,0.,1.)); +#348650 = ORIENTED_EDGE('',*,*,#348651,.F.); +#348651 = EDGE_CURVE('',#348612,#348644,#348652,.T.); +#348652 = LINE('',#348653,#348654); +#348653 = CARTESIAN_POINT('',(128.15,-156.3375,1.51)); +#348654 = VECTOR('',#348655,1.); +#348655 = DIRECTION('',(0.,-1.,0.)); +#348656 = PLANE('',#348657); +#348657 = AXIS2_PLACEMENT_3D('',#348658,#348659,#348660); +#348658 = CARTESIAN_POINT('',(128.15,-156.3375,1.51)); +#348659 = DIRECTION('',(1.,0.,-0.)); +#348660 = DIRECTION('',(0.,-1.,0.)); +#348661 = ADVANCED_FACE('',(#348662),#348689,.T.); +#348662 = FACE_BOUND('',#348663,.T.); +#348663 = EDGE_LOOP('',(#348664,#348665,#348674,#348682)); +#348664 = ORIENTED_EDGE('',*,*,#348643,.T.); +#348665 = ORIENTED_EDGE('',*,*,#348666,.T.); +#348666 = EDGE_CURVE('',#348636,#348667,#348669,.T.); +#348667 = VERTEX_POINT('',#348668); +#348668 = CARTESIAN_POINT('',(127.9625,-157.95,1.55)); +#348669 = CIRCLE('',#348670,0.187498366229); +#348670 = AXIS2_PLACEMENT_3D('',#348671,#348672,#348673); +#348671 = CARTESIAN_POINT('',(127.96250163377,-157.7625016337,1.55)); +#348672 = DIRECTION('',(0.,0.,-1.)); +#348673 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#348674 = ORIENTED_EDGE('',*,*,#348675,.F.); +#348675 = EDGE_CURVE('',#348676,#348667,#348678,.T.); +#348676 = VERTEX_POINT('',#348677); +#348677 = CARTESIAN_POINT('',(127.9625,-157.95,1.51)); +#348678 = LINE('',#348679,#348680); +#348679 = CARTESIAN_POINT('',(127.9625,-157.95,1.51)); +#348680 = VECTOR('',#348681,1.); +#348681 = DIRECTION('',(0.,0.,1.)); +#348682 = ORIENTED_EDGE('',*,*,#348683,.F.); +#348683 = EDGE_CURVE('',#348644,#348676,#348684,.T.); +#348684 = CIRCLE('',#348685,0.187498366229); +#348685 = AXIS2_PLACEMENT_3D('',#348686,#348687,#348688); +#348686 = CARTESIAN_POINT('',(127.96250163377,-157.7625016337,1.51)); +#348687 = DIRECTION('',(0.,0.,-1.)); +#348688 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#348689 = CYLINDRICAL_SURFACE('',#348690,0.187498366229); +#348690 = AXIS2_PLACEMENT_3D('',#348691,#348692,#348693); +#348691 = CARTESIAN_POINT('',(127.96250163377,-157.7625016337,1.51)); +#348692 = DIRECTION('',(0.,0.,-1.)); +#348693 = DIRECTION('',(0.999999999962,8.713558430711E-06,0.)); +#348694 = ADVANCED_FACE('',(#348695),#348720,.T.); +#348695 = FACE_BOUND('',#348696,.T.); +#348696 = EDGE_LOOP('',(#348697,#348698,#348706,#348714)); +#348697 = ORIENTED_EDGE('',*,*,#348675,.T.); +#348698 = ORIENTED_EDGE('',*,*,#348699,.T.); +#348699 = EDGE_CURVE('',#348667,#348700,#348702,.T.); +#348700 = VERTEX_POINT('',#348701); +#348701 = CARTESIAN_POINT('',(127.5875,-157.95,1.55)); +#348702 = LINE('',#348703,#348704); +#348703 = CARTESIAN_POINT('',(127.9625,-157.95,1.55)); +#348704 = VECTOR('',#348705,1.); +#348705 = DIRECTION('',(-1.,0.,0.)); +#348706 = ORIENTED_EDGE('',*,*,#348707,.F.); +#348707 = EDGE_CURVE('',#348708,#348700,#348710,.T.); +#348708 = VERTEX_POINT('',#348709); +#348709 = CARTESIAN_POINT('',(127.5875,-157.95,1.51)); +#348710 = LINE('',#348711,#348712); +#348711 = CARTESIAN_POINT('',(127.5875,-157.95,1.51)); +#348712 = VECTOR('',#348713,1.); +#348713 = DIRECTION('',(0.,0.,1.)); +#348714 = ORIENTED_EDGE('',*,*,#348715,.F.); +#348715 = EDGE_CURVE('',#348676,#348708,#348716,.T.); +#348716 = LINE('',#348717,#348718); +#348717 = CARTESIAN_POINT('',(127.9625,-157.95,1.51)); +#348718 = VECTOR('',#348719,1.); +#348719 = DIRECTION('',(-1.,0.,0.)); +#348720 = PLANE('',#348721); +#348721 = AXIS2_PLACEMENT_3D('',#348722,#348723,#348724); +#348722 = CARTESIAN_POINT('',(127.9625,-157.95,1.51)); +#348723 = DIRECTION('',(0.,-1.,0.)); +#348724 = DIRECTION('',(-1.,0.,0.)); +#348725 = ADVANCED_FACE('',(#348726),#348753,.T.); +#348726 = FACE_BOUND('',#348727,.T.); +#348727 = EDGE_LOOP('',(#348728,#348729,#348738,#348746)); +#348728 = ORIENTED_EDGE('',*,*,#348707,.T.); +#348729 = ORIENTED_EDGE('',*,*,#348730,.T.); +#348730 = EDGE_CURVE('',#348700,#348731,#348733,.T.); +#348731 = VERTEX_POINT('',#348732); +#348732 = CARTESIAN_POINT('',(127.4,-157.7625,1.55)); +#348733 = CIRCLE('',#348734,0.187498366229); +#348734 = AXIS2_PLACEMENT_3D('',#348735,#348736,#348737); +#348735 = CARTESIAN_POINT('',(127.58749836622,-157.7625016337,1.55)); +#348736 = DIRECTION('',(0.,0.,-1.)); +#348737 = DIRECTION('',(8.713558658088E-06,-0.999999999962,0.)); +#348738 = ORIENTED_EDGE('',*,*,#348739,.F.); +#348739 = EDGE_CURVE('',#348740,#348731,#348742,.T.); +#348740 = VERTEX_POINT('',#348741); +#348741 = CARTESIAN_POINT('',(127.4,-157.7625,1.51)); +#348742 = LINE('',#348743,#348744); +#348743 = CARTESIAN_POINT('',(127.4,-157.7625,1.51)); +#348744 = VECTOR('',#348745,1.); +#348745 = DIRECTION('',(0.,0.,1.)); +#348746 = ORIENTED_EDGE('',*,*,#348747,.F.); +#348747 = EDGE_CURVE('',#348708,#348740,#348748,.T.); +#348748 = CIRCLE('',#348749,0.187498366229); +#348749 = AXIS2_PLACEMENT_3D('',#348750,#348751,#348752); +#348750 = CARTESIAN_POINT('',(127.58749836622,-157.7625016337,1.51)); +#348751 = DIRECTION('',(0.,0.,-1.)); +#348752 = DIRECTION('',(8.713558658088E-06,-0.999999999962,0.)); +#348753 = CYLINDRICAL_SURFACE('',#348754,0.187498366229); +#348754 = AXIS2_PLACEMENT_3D('',#348755,#348756,#348757); +#348755 = CARTESIAN_POINT('',(127.58749836622,-157.7625016337,1.51)); +#348756 = DIRECTION('',(0.,0.,-1.)); +#348757 = DIRECTION('',(8.713558658088E-06,-0.999999999962,0.)); +#348758 = ADVANCED_FACE('',(#348759),#348775,.T.); +#348759 = FACE_BOUND('',#348760,.T.); +#348760 = EDGE_LOOP('',(#348761,#348762,#348768,#348769)); +#348761 = ORIENTED_EDGE('',*,*,#348739,.T.); +#348762 = ORIENTED_EDGE('',*,*,#348763,.T.); +#348763 = EDGE_CURVE('',#348731,#348531,#348764,.T.); +#348764 = LINE('',#348765,#348766); +#348765 = CARTESIAN_POINT('',(127.4,-157.7625,1.55)); +#348766 = VECTOR('',#348767,1.); +#348767 = DIRECTION('',(0.,1.,0.)); +#348768 = ORIENTED_EDGE('',*,*,#348528,.F.); +#348769 = ORIENTED_EDGE('',*,*,#348770,.F.); +#348770 = EDGE_CURVE('',#348740,#348529,#348771,.T.); +#348771 = LINE('',#348772,#348773); +#348772 = CARTESIAN_POINT('',(127.4,-157.7625,1.51)); +#348773 = VECTOR('',#348774,1.); +#348774 = DIRECTION('',(0.,1.,0.)); +#348775 = PLANE('',#348776); +#348776 = AXIS2_PLACEMENT_3D('',#348777,#348778,#348779); +#348777 = CARTESIAN_POINT('',(127.4,-157.7625,1.51)); +#348778 = DIRECTION('',(-1.,0.,0.)); +#348779 = DIRECTION('',(0.,1.,0.)); +#348780 = ADVANCED_FACE('',(#348781),#348791,.F.); +#348781 = FACE_BOUND('',#348782,.T.); +#348782 = EDGE_LOOP('',(#348783,#348784,#348785,#348786,#348787,#348788, + #348789,#348790)); +#348783 = ORIENTED_EDGE('',*,*,#348555,.T.); +#348784 = ORIENTED_EDGE('',*,*,#348587,.T.); +#348785 = ORIENTED_EDGE('',*,*,#348619,.T.); +#348786 = ORIENTED_EDGE('',*,*,#348651,.T.); +#348787 = ORIENTED_EDGE('',*,*,#348683,.T.); +#348788 = ORIENTED_EDGE('',*,*,#348715,.T.); +#348789 = ORIENTED_EDGE('',*,*,#348747,.T.); +#348790 = ORIENTED_EDGE('',*,*,#348770,.T.); +#348791 = PLANE('',#348792); +#348792 = AXIS2_PLACEMENT_3D('',#348793,#348794,#348795); +#348793 = CARTESIAN_POINT('',(0.,0.,1.51)); +#348794 = DIRECTION('',(0.,0.,1.)); +#348795 = DIRECTION('',(1.,0.,-0.)); +#348796 = ADVANCED_FACE('',(#348797),#348807,.T.); +#348797 = FACE_BOUND('',#348798,.F.); +#348798 = EDGE_LOOP('',(#348799,#348800,#348801,#348802,#348803,#348804, + #348805,#348806)); +#348799 = ORIENTED_EDGE('',*,*,#348538,.T.); +#348800 = ORIENTED_EDGE('',*,*,#348571,.T.); +#348801 = ORIENTED_EDGE('',*,*,#348602,.T.); +#348802 = ORIENTED_EDGE('',*,*,#348635,.T.); +#348803 = ORIENTED_EDGE('',*,*,#348666,.T.); +#348804 = ORIENTED_EDGE('',*,*,#348699,.T.); +#348805 = ORIENTED_EDGE('',*,*,#348730,.T.); +#348806 = ORIENTED_EDGE('',*,*,#348763,.T.); +#348807 = PLANE('',#348808); +#348808 = AXIS2_PLACEMENT_3D('',#348809,#348810,#348811); +#348809 = CARTESIAN_POINT('',(0.,0.,1.55)); +#348810 = DIRECTION('',(0.,0.,1.)); +#348811 = DIRECTION('',(1.,0.,-0.)); +#348812 = MANIFOLD_SOLID_BREP('',#348813); +#348813 = CLOSED_SHELL('',(#348814,#348856,#348887,#348920,#348951, + #348984,#349015,#349048,#349070,#349086)); +#348814 = ADVANCED_FACE('',(#348815),#348851,.T.); +#348815 = FACE_BOUND('',#348816,.T.); +#348816 = EDGE_LOOP('',(#348817,#348827,#348836,#348844)); +#348817 = ORIENTED_EDGE('',*,*,#348818,.T.); +#348818 = EDGE_CURVE('',#348819,#348821,#348823,.T.); +#348819 = VERTEX_POINT('',#348820); +#348820 = CARTESIAN_POINT('',(129.85,-156.3375,1.51)); +#348821 = VERTEX_POINT('',#348822); +#348822 = CARTESIAN_POINT('',(129.85,-156.3375,1.55)); +#348823 = LINE('',#348824,#348825); +#348824 = CARTESIAN_POINT('',(129.85,-156.3375,1.51)); +#348825 = VECTOR('',#348826,1.); +#348826 = DIRECTION('',(0.,0.,1.)); +#348827 = ORIENTED_EDGE('',*,*,#348828,.T.); +#348828 = EDGE_CURVE('',#348821,#348829,#348831,.T.); +#348829 = VERTEX_POINT('',#348830); +#348830 = CARTESIAN_POINT('',(130.0375,-156.15,1.55)); +#348831 = CIRCLE('',#348832,0.187498366229); +#348832 = AXIS2_PLACEMENT_3D('',#348833,#348834,#348835); +#348833 = CARTESIAN_POINT('',(130.03749836622,-156.3374983662,1.55)); +#348834 = DIRECTION('',(0.,0.,-1.)); +#348835 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#348836 = ORIENTED_EDGE('',*,*,#348837,.F.); +#348837 = EDGE_CURVE('',#348838,#348829,#348840,.T.); +#348838 = VERTEX_POINT('',#348839); +#348839 = CARTESIAN_POINT('',(130.0375,-156.15,1.51)); +#348840 = LINE('',#348841,#348842); +#348841 = CARTESIAN_POINT('',(130.0375,-156.15,1.51)); +#348842 = VECTOR('',#348843,1.); +#348843 = DIRECTION('',(0.,0.,1.)); +#348844 = ORIENTED_EDGE('',*,*,#348845,.F.); +#348845 = EDGE_CURVE('',#348819,#348838,#348846,.T.); +#348846 = CIRCLE('',#348847,0.187498366229); +#348847 = AXIS2_PLACEMENT_3D('',#348848,#348849,#348850); +#348848 = CARTESIAN_POINT('',(130.03749836622,-156.3374983662,1.51)); +#348849 = DIRECTION('',(0.,0.,-1.)); +#348850 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#348851 = CYLINDRICAL_SURFACE('',#348852,0.187498366229); +#348852 = AXIS2_PLACEMENT_3D('',#348853,#348854,#348855); +#348853 = CARTESIAN_POINT('',(130.03749836622,-156.3374983662,1.51)); +#348854 = DIRECTION('',(0.,0.,-1.)); +#348855 = DIRECTION('',(-0.999999999962,-8.713558430711E-06,-0.)); +#348856 = ADVANCED_FACE('',(#348857),#348882,.T.); +#348857 = FACE_BOUND('',#348858,.T.); +#348858 = EDGE_LOOP('',(#348859,#348860,#348868,#348876)); +#348859 = ORIENTED_EDGE('',*,*,#348837,.T.); +#348860 = ORIENTED_EDGE('',*,*,#348861,.T.); +#348861 = EDGE_CURVE('',#348829,#348862,#348864,.T.); +#348862 = VERTEX_POINT('',#348863); +#348863 = CARTESIAN_POINT('',(130.4125,-156.15,1.55)); +#348864 = LINE('',#348865,#348866); +#348865 = CARTESIAN_POINT('',(130.0375,-156.15,1.55)); +#348866 = VECTOR('',#348867,1.); +#348867 = DIRECTION('',(1.,0.,0.)); +#348868 = ORIENTED_EDGE('',*,*,#348869,.F.); +#348869 = EDGE_CURVE('',#348870,#348862,#348872,.T.); +#348870 = VERTEX_POINT('',#348871); +#348871 = CARTESIAN_POINT('',(130.4125,-156.15,1.51)); +#348872 = LINE('',#348873,#348874); +#348873 = CARTESIAN_POINT('',(130.4125,-156.15,1.51)); +#348874 = VECTOR('',#348875,1.); +#348875 = DIRECTION('',(0.,0.,1.)); +#348876 = ORIENTED_EDGE('',*,*,#348877,.F.); +#348877 = EDGE_CURVE('',#348838,#348870,#348878,.T.); +#348878 = LINE('',#348879,#348880); +#348879 = CARTESIAN_POINT('',(130.0375,-156.15,1.51)); +#348880 = VECTOR('',#348881,1.); +#348881 = DIRECTION('',(1.,0.,0.)); +#348882 = PLANE('',#348883); +#348883 = AXIS2_PLACEMENT_3D('',#348884,#348885,#348886); +#348884 = CARTESIAN_POINT('',(130.0375,-156.15,1.51)); +#348885 = DIRECTION('',(0.,1.,0.)); +#348886 = DIRECTION('',(1.,0.,0.)); +#348887 = ADVANCED_FACE('',(#348888),#348915,.T.); +#348888 = FACE_BOUND('',#348889,.T.); +#348889 = EDGE_LOOP('',(#348890,#348891,#348900,#348908)); +#348890 = ORIENTED_EDGE('',*,*,#348869,.T.); +#348891 = ORIENTED_EDGE('',*,*,#348892,.T.); +#348892 = EDGE_CURVE('',#348862,#348893,#348895,.T.); +#348893 = VERTEX_POINT('',#348894); +#348894 = CARTESIAN_POINT('',(130.6,-156.3375,1.55)); +#348895 = CIRCLE('',#348896,0.187498366229); +#348896 = AXIS2_PLACEMENT_3D('',#348897,#348898,#348899); +#348897 = CARTESIAN_POINT('',(130.41250163377,-156.3374983662,1.55)); +#348898 = DIRECTION('',(0.,0.,-1.)); +#348899 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#348900 = ORIENTED_EDGE('',*,*,#348901,.F.); +#348901 = EDGE_CURVE('',#348902,#348893,#348904,.T.); +#348902 = VERTEX_POINT('',#348903); +#348903 = CARTESIAN_POINT('',(130.6,-156.3375,1.51)); +#348904 = LINE('',#348905,#348906); +#348905 = CARTESIAN_POINT('',(130.6,-156.3375,1.51)); +#348906 = VECTOR('',#348907,1.); +#348907 = DIRECTION('',(0.,0.,1.)); +#348908 = ORIENTED_EDGE('',*,*,#348909,.F.); +#348909 = EDGE_CURVE('',#348870,#348902,#348910,.T.); +#348910 = CIRCLE('',#348911,0.187498366229); +#348911 = AXIS2_PLACEMENT_3D('',#348912,#348913,#348914); +#348912 = CARTESIAN_POINT('',(130.41250163377,-156.3374983662,1.51)); +#348913 = DIRECTION('',(0.,0.,-1.)); +#348914 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#348915 = CYLINDRICAL_SURFACE('',#348916,0.187498366229); +#348916 = AXIS2_PLACEMENT_3D('',#348917,#348918,#348919); +#348917 = CARTESIAN_POINT('',(130.41250163377,-156.3374983662,1.51)); +#348918 = DIRECTION('',(0.,0.,-1.)); +#348919 = DIRECTION('',(-8.713558582296E-06,0.999999999962,0.)); +#348920 = ADVANCED_FACE('',(#348921),#348946,.T.); +#348921 = FACE_BOUND('',#348922,.T.); +#348922 = EDGE_LOOP('',(#348923,#348924,#348932,#348940)); +#348923 = ORIENTED_EDGE('',*,*,#348901,.T.); +#348924 = ORIENTED_EDGE('',*,*,#348925,.T.); +#348925 = EDGE_CURVE('',#348893,#348926,#348928,.T.); +#348926 = VERTEX_POINT('',#348927); +#348927 = CARTESIAN_POINT('',(130.6,-157.7625,1.55)); +#348928 = LINE('',#348929,#348930); +#348929 = CARTESIAN_POINT('',(130.6,-156.3375,1.55)); +#348930 = VECTOR('',#348931,1.); +#348931 = DIRECTION('',(0.,-1.,0.)); +#348932 = ORIENTED_EDGE('',*,*,#348933,.F.); +#348933 = EDGE_CURVE('',#348934,#348926,#348936,.T.); +#348934 = VERTEX_POINT('',#348935); +#348935 = CARTESIAN_POINT('',(130.6,-157.7625,1.51)); +#348936 = LINE('',#348937,#348938); +#348937 = CARTESIAN_POINT('',(130.6,-157.7625,1.51)); +#348938 = VECTOR('',#348939,1.); +#348939 = DIRECTION('',(0.,0.,1.)); +#348940 = ORIENTED_EDGE('',*,*,#348941,.F.); +#348941 = EDGE_CURVE('',#348902,#348934,#348942,.T.); +#348942 = LINE('',#348943,#348944); +#348943 = CARTESIAN_POINT('',(130.6,-156.3375,1.51)); +#348944 = VECTOR('',#348945,1.); +#348945 = DIRECTION('',(0.,-1.,0.)); +#348946 = PLANE('',#348947); +#348947 = AXIS2_PLACEMENT_3D('',#348948,#348949,#348950); +#348948 = CARTESIAN_POINT('',(130.6,-156.3375,1.51)); +#348949 = DIRECTION('',(1.,0.,-0.)); +#348950 = DIRECTION('',(0.,-1.,0.)); +#348951 = ADVANCED_FACE('',(#348952),#348979,.T.); +#348952 = FACE_BOUND('',#348953,.T.); +#348953 = EDGE_LOOP('',(#348954,#348955,#348964,#348972)); +#348954 = ORIENTED_EDGE('',*,*,#348933,.T.); +#348955 = ORIENTED_EDGE('',*,*,#348956,.T.); +#348956 = EDGE_CURVE('',#348926,#348957,#348959,.T.); +#348957 = VERTEX_POINT('',#348958); +#348958 = CARTESIAN_POINT('',(130.4125,-157.95,1.55)); +#348959 = CIRCLE('',#348960,0.187498366229); +#348960 = AXIS2_PLACEMENT_3D('',#348961,#348962,#348963); +#348961 = CARTESIAN_POINT('',(130.41250163377,-157.7625016337,1.55)); +#348962 = DIRECTION('',(0.,0.,-1.)); +#348963 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#348964 = ORIENTED_EDGE('',*,*,#348965,.F.); +#348965 = EDGE_CURVE('',#348966,#348957,#348968,.T.); +#348966 = VERTEX_POINT('',#348967); +#348967 = CARTESIAN_POINT('',(130.4125,-157.95,1.51)); +#348968 = LINE('',#348969,#348970); +#348969 = CARTESIAN_POINT('',(130.4125,-157.95,1.51)); +#348970 = VECTOR('',#348971,1.); +#348971 = DIRECTION('',(0.,0.,1.)); +#348972 = ORIENTED_EDGE('',*,*,#348973,.F.); +#348973 = EDGE_CURVE('',#348934,#348966,#348974,.T.); +#348974 = CIRCLE('',#348975,0.187498366229); +#348975 = AXIS2_PLACEMENT_3D('',#348976,#348977,#348978); +#348976 = CARTESIAN_POINT('',(130.41250163377,-157.7625016337,1.51)); +#348977 = DIRECTION('',(0.,0.,-1.)); +#348978 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#348979 = CYLINDRICAL_SURFACE('',#348980,0.187498366229); +#348980 = AXIS2_PLACEMENT_3D('',#348981,#348982,#348983); +#348981 = CARTESIAN_POINT('',(130.41250163377,-157.7625016337,1.51)); +#348982 = DIRECTION('',(0.,0.,-1.)); +#348983 = DIRECTION('',(0.999999999962,8.713558582296E-06,0.)); +#348984 = ADVANCED_FACE('',(#348985),#349010,.T.); +#348985 = FACE_BOUND('',#348986,.T.); +#348986 = EDGE_LOOP('',(#348987,#348988,#348996,#349004)); +#348987 = ORIENTED_EDGE('',*,*,#348965,.T.); +#348988 = ORIENTED_EDGE('',*,*,#348989,.T.); +#348989 = EDGE_CURVE('',#348957,#348990,#348992,.T.); +#348990 = VERTEX_POINT('',#348991); +#348991 = CARTESIAN_POINT('',(130.0375,-157.95,1.55)); +#348992 = LINE('',#348993,#348994); +#348993 = CARTESIAN_POINT('',(130.4125,-157.95,1.55)); +#348994 = VECTOR('',#348995,1.); +#348995 = DIRECTION('',(-1.,0.,0.)); +#348996 = ORIENTED_EDGE('',*,*,#348997,.F.); +#348997 = EDGE_CURVE('',#348998,#348990,#349000,.T.); +#348998 = VERTEX_POINT('',#348999); +#348999 = CARTESIAN_POINT('',(130.0375,-157.95,1.51)); +#349000 = LINE('',#349001,#349002); +#349001 = CARTESIAN_POINT('',(130.0375,-157.95,1.51)); +#349002 = VECTOR('',#349003,1.); +#349003 = DIRECTION('',(0.,0.,1.)); +#349004 = ORIENTED_EDGE('',*,*,#349005,.F.); +#349005 = EDGE_CURVE('',#348966,#348998,#349006,.T.); +#349006 = LINE('',#349007,#349008); +#349007 = CARTESIAN_POINT('',(130.4125,-157.95,1.51)); +#349008 = VECTOR('',#349009,1.); +#349009 = DIRECTION('',(-1.,0.,0.)); +#349010 = PLANE('',#349011); +#349011 = AXIS2_PLACEMENT_3D('',#349012,#349013,#349014); +#349012 = CARTESIAN_POINT('',(130.4125,-157.95,1.51)); +#349013 = DIRECTION('',(0.,-1.,0.)); +#349014 = DIRECTION('',(-1.,0.,0.)); +#349015 = ADVANCED_FACE('',(#349016),#349043,.T.); +#349016 = FACE_BOUND('',#349017,.T.); +#349017 = EDGE_LOOP('',(#349018,#349019,#349028,#349036)); +#349018 = ORIENTED_EDGE('',*,*,#348997,.T.); +#349019 = ORIENTED_EDGE('',*,*,#349020,.T.); +#349020 = EDGE_CURVE('',#348990,#349021,#349023,.T.); +#349021 = VERTEX_POINT('',#349022); +#349022 = CARTESIAN_POINT('',(129.85,-157.7625,1.55)); +#349023 = CIRCLE('',#349024,0.187498366229); +#349024 = AXIS2_PLACEMENT_3D('',#349025,#349026,#349027); +#349025 = CARTESIAN_POINT('',(130.03749836622,-157.7625016337,1.55)); +#349026 = DIRECTION('',(0.,0.,-1.)); +#349027 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#349028 = ORIENTED_EDGE('',*,*,#349029,.F.); +#349029 = EDGE_CURVE('',#349030,#349021,#349032,.T.); +#349030 = VERTEX_POINT('',#349031); +#349031 = CARTESIAN_POINT('',(129.85,-157.7625,1.51)); +#349032 = LINE('',#349033,#349034); +#349033 = CARTESIAN_POINT('',(129.85,-157.7625,1.51)); +#349034 = VECTOR('',#349035,1.); +#349035 = DIRECTION('',(0.,0.,1.)); +#349036 = ORIENTED_EDGE('',*,*,#349037,.F.); +#349037 = EDGE_CURVE('',#348998,#349030,#349038,.T.); +#349038 = CIRCLE('',#349039,0.187498366229); +#349039 = AXIS2_PLACEMENT_3D('',#349040,#349041,#349042); +#349040 = CARTESIAN_POINT('',(130.03749836622,-157.7625016337,1.51)); +#349041 = DIRECTION('',(0.,0.,-1.)); +#349042 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#349043 = CYLINDRICAL_SURFACE('',#349044,0.187498366229); +#349044 = AXIS2_PLACEMENT_3D('',#349045,#349046,#349047); +#349045 = CARTESIAN_POINT('',(130.03749836622,-157.7625016337,1.51)); +#349046 = DIRECTION('',(0.,0.,-1.)); +#349047 = DIRECTION('',(8.713558430711E-06,-0.999999999962,0.)); +#349048 = ADVANCED_FACE('',(#349049),#349065,.T.); +#349049 = FACE_BOUND('',#349050,.T.); +#349050 = EDGE_LOOP('',(#349051,#349052,#349058,#349059)); +#349051 = ORIENTED_EDGE('',*,*,#349029,.T.); +#349052 = ORIENTED_EDGE('',*,*,#349053,.T.); +#349053 = EDGE_CURVE('',#349021,#348821,#349054,.T.); +#349054 = LINE('',#349055,#349056); +#349055 = CARTESIAN_POINT('',(129.85,-157.7625,1.55)); +#349056 = VECTOR('',#349057,1.); +#349057 = DIRECTION('',(0.,1.,0.)); +#349058 = ORIENTED_EDGE('',*,*,#348818,.F.); +#349059 = ORIENTED_EDGE('',*,*,#349060,.F.); +#349060 = EDGE_CURVE('',#349030,#348819,#349061,.T.); +#349061 = LINE('',#349062,#349063); +#349062 = CARTESIAN_POINT('',(129.85,-157.7625,1.51)); +#349063 = VECTOR('',#349064,1.); +#349064 = DIRECTION('',(0.,1.,0.)); +#349065 = PLANE('',#349066); +#349066 = AXIS2_PLACEMENT_3D('',#349067,#349068,#349069); +#349067 = CARTESIAN_POINT('',(129.85,-157.7625,1.51)); +#349068 = DIRECTION('',(-1.,0.,0.)); +#349069 = DIRECTION('',(0.,1.,0.)); +#349070 = ADVANCED_FACE('',(#349071),#349081,.F.); +#349071 = FACE_BOUND('',#349072,.T.); +#349072 = EDGE_LOOP('',(#349073,#349074,#349075,#349076,#349077,#349078, + #349079,#349080)); +#349073 = ORIENTED_EDGE('',*,*,#348845,.T.); +#349074 = ORIENTED_EDGE('',*,*,#348877,.T.); +#349075 = ORIENTED_EDGE('',*,*,#348909,.T.); +#349076 = ORIENTED_EDGE('',*,*,#348941,.T.); +#349077 = ORIENTED_EDGE('',*,*,#348973,.T.); +#349078 = ORIENTED_EDGE('',*,*,#349005,.T.); +#349079 = ORIENTED_EDGE('',*,*,#349037,.T.); +#349080 = ORIENTED_EDGE('',*,*,#349060,.T.); +#349081 = PLANE('',#349082); +#349082 = AXIS2_PLACEMENT_3D('',#349083,#349084,#349085); +#349083 = CARTESIAN_POINT('',(0.,0.,1.51)); +#349084 = DIRECTION('',(0.,0.,1.)); +#349085 = DIRECTION('',(1.,0.,-0.)); +#349086 = ADVANCED_FACE('',(#349087),#349097,.T.); +#349087 = FACE_BOUND('',#349088,.F.); +#349088 = EDGE_LOOP('',(#349089,#349090,#349091,#349092,#349093,#349094, + #349095,#349096)); +#349089 = ORIENTED_EDGE('',*,*,#348828,.T.); +#349090 = ORIENTED_EDGE('',*,*,#348861,.T.); +#349091 = ORIENTED_EDGE('',*,*,#348892,.T.); +#349092 = ORIENTED_EDGE('',*,*,#348925,.T.); +#349093 = ORIENTED_EDGE('',*,*,#348956,.T.); +#349094 = ORIENTED_EDGE('',*,*,#348989,.T.); +#349095 = ORIENTED_EDGE('',*,*,#349020,.T.); +#349096 = ORIENTED_EDGE('',*,*,#349053,.T.); +#349097 = PLANE('',#349098); +#349098 = AXIS2_PLACEMENT_3D('',#349099,#349100,#349101); +#349099 = CARTESIAN_POINT('',(0.,0.,1.55)); +#349100 = DIRECTION('',(0.,0.,1.)); +#349101 = DIRECTION('',(1.,0.,-0.)); +#349102 = MANIFOLD_SOLID_BREP('',#349103); +#349103 = CLOSED_SHELL('',(#349104,#349146,#349177,#349210,#349241, + #349274,#349305,#349338,#349360,#349376)); +#349104 = ADVANCED_FACE('',(#349105),#349141,.T.); +#349105 = FACE_BOUND('',#349106,.F.); +#349106 = EDGE_LOOP('',(#349107,#349117,#349126,#349134)); +#349107 = ORIENTED_EDGE('',*,*,#349108,.T.); +#349108 = EDGE_CURVE('',#349109,#349111,#349113,.T.); +#349109 = VERTEX_POINT('',#349110); +#349110 = CARTESIAN_POINT('',(147.88,-133.515,0.)); +#349111 = VERTEX_POINT('',#349112); +#349112 = CARTESIAN_POINT('',(147.88,-133.515,-4.E-02)); +#349113 = LINE('',#349114,#349115); +#349114 = CARTESIAN_POINT('',(147.88,-133.515,0.)); +#349115 = VECTOR('',#349116,1.); +#349116 = DIRECTION('',(0.,0.,-1.)); +#349117 = ORIENTED_EDGE('',*,*,#349118,.T.); +#349118 = EDGE_CURVE('',#349111,#349119,#349121,.T.); +#349119 = VERTEX_POINT('',#349120); +#349120 = CARTESIAN_POINT('',(148.015,-133.38,-4.E-02)); +#349121 = CIRCLE('',#349122,0.135001418495); +#349122 = AXIS2_PLACEMENT_3D('',#349123,#349124,#349125); +#349123 = CARTESIAN_POINT('',(148.01500141848,-133.5150014184,-4.E-02)); +#349124 = DIRECTION('',(0.,0.,-1.)); +#349125 = DIRECTION('',(-0.999999999945,1.050720693735E-05,0.)); +#349126 = ORIENTED_EDGE('',*,*,#349127,.F.); +#349127 = EDGE_CURVE('',#349128,#349119,#349130,.T.); +#349128 = VERTEX_POINT('',#349129); +#349129 = CARTESIAN_POINT('',(148.015,-133.38,0.)); +#349130 = LINE('',#349131,#349132); +#349131 = CARTESIAN_POINT('',(148.015,-133.38,0.)); +#349132 = VECTOR('',#349133,1.); +#349133 = DIRECTION('',(0.,0.,-1.)); +#349134 = ORIENTED_EDGE('',*,*,#349135,.F.); +#349135 = EDGE_CURVE('',#349109,#349128,#349136,.T.); +#349136 = CIRCLE('',#349137,0.135001418495); +#349137 = AXIS2_PLACEMENT_3D('',#349138,#349139,#349140); +#349138 = CARTESIAN_POINT('',(148.01500141848,-133.5150014184,0.)); +#349139 = DIRECTION('',(0.,0.,-1.)); +#349140 = DIRECTION('',(-0.999999999945,1.050720693735E-05,0.)); +#349141 = CYLINDRICAL_SURFACE('',#349142,0.135001418495); +#349142 = AXIS2_PLACEMENT_3D('',#349143,#349144,#349145); +#349143 = CARTESIAN_POINT('',(148.01500141848,-133.5150014184,0.)); +#349144 = DIRECTION('',(-0.,-0.,1.)); +#349145 = DIRECTION('',(-0.999999999945,1.050720693735E-05,0.)); +#349146 = ADVANCED_FACE('',(#349147),#349172,.F.); +#349147 = FACE_BOUND('',#349148,.F.); +#349148 = EDGE_LOOP('',(#349149,#349150,#349158,#349166)); +#349149 = ORIENTED_EDGE('',*,*,#349127,.T.); +#349150 = ORIENTED_EDGE('',*,*,#349151,.T.); +#349151 = EDGE_CURVE('',#349119,#349152,#349154,.T.); +#349152 = VERTEX_POINT('',#349153); +#349153 = CARTESIAN_POINT('',(148.285,-133.38,-4.E-02)); +#349154 = LINE('',#349155,#349156); +#349155 = CARTESIAN_POINT('',(148.015,-133.38,-4.E-02)); +#349156 = VECTOR('',#349157,1.); +#349157 = DIRECTION('',(1.,0.,0.)); +#349158 = ORIENTED_EDGE('',*,*,#349159,.F.); +#349159 = EDGE_CURVE('',#349160,#349152,#349162,.T.); +#349160 = VERTEX_POINT('',#349161); +#349161 = CARTESIAN_POINT('',(148.285,-133.38,0.)); +#349162 = LINE('',#349163,#349164); +#349163 = CARTESIAN_POINT('',(148.285,-133.38,0.)); +#349164 = VECTOR('',#349165,1.); +#349165 = DIRECTION('',(0.,0.,-1.)); +#349166 = ORIENTED_EDGE('',*,*,#349167,.F.); +#349167 = EDGE_CURVE('',#349128,#349160,#349168,.T.); +#349168 = LINE('',#349169,#349170); +#349169 = CARTESIAN_POINT('',(148.015,-133.38,0.)); +#349170 = VECTOR('',#349171,1.); +#349171 = DIRECTION('',(1.,0.,0.)); +#349172 = PLANE('',#349173); +#349173 = AXIS2_PLACEMENT_3D('',#349174,#349175,#349176); +#349174 = CARTESIAN_POINT('',(148.015,-133.38,0.)); +#349175 = DIRECTION('',(0.,-1.,0.)); +#349176 = DIRECTION('',(1.,0.,0.)); +#349177 = ADVANCED_FACE('',(#349178),#349205,.T.); +#349178 = FACE_BOUND('',#349179,.F.); +#349179 = EDGE_LOOP('',(#349180,#349181,#349190,#349198)); +#349180 = ORIENTED_EDGE('',*,*,#349159,.T.); +#349181 = ORIENTED_EDGE('',*,*,#349182,.T.); +#349182 = EDGE_CURVE('',#349152,#349183,#349185,.T.); +#349183 = VERTEX_POINT('',#349184); +#349184 = CARTESIAN_POINT('',(148.42,-133.515,-4.E-02)); +#349185 = CIRCLE('',#349186,0.135001418495); +#349186 = AXIS2_PLACEMENT_3D('',#349187,#349188,#349189); +#349187 = CARTESIAN_POINT('',(148.28499858151,-133.5150014184,-4.E-02)); +#349188 = DIRECTION('',(0.,0.,-1.)); +#349189 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#349190 = ORIENTED_EDGE('',*,*,#349191,.F.); +#349191 = EDGE_CURVE('',#349192,#349183,#349194,.T.); +#349192 = VERTEX_POINT('',#349193); +#349193 = CARTESIAN_POINT('',(148.42,-133.515,0.)); +#349194 = LINE('',#349195,#349196); +#349195 = CARTESIAN_POINT('',(148.42,-133.515,0.)); +#349196 = VECTOR('',#349197,1.); +#349197 = DIRECTION('',(0.,0.,-1.)); +#349198 = ORIENTED_EDGE('',*,*,#349199,.F.); +#349199 = EDGE_CURVE('',#349160,#349192,#349200,.T.); +#349200 = CIRCLE('',#349201,0.135001418495); +#349201 = AXIS2_PLACEMENT_3D('',#349202,#349203,#349204); +#349202 = CARTESIAN_POINT('',(148.28499858151,-133.5150014184,0.)); +#349203 = DIRECTION('',(0.,0.,-1.)); +#349204 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#349205 = CYLINDRICAL_SURFACE('',#349206,0.135001418495); +#349206 = AXIS2_PLACEMENT_3D('',#349207,#349208,#349209); +#349207 = CARTESIAN_POINT('',(148.28499858151,-133.5150014184,0.)); +#349208 = DIRECTION('',(-0.,-0.,1.)); +#349209 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#349210 = ADVANCED_FACE('',(#349211),#349236,.F.); +#349211 = FACE_BOUND('',#349212,.F.); +#349212 = EDGE_LOOP('',(#349213,#349214,#349222,#349230)); +#349213 = ORIENTED_EDGE('',*,*,#349191,.T.); +#349214 = ORIENTED_EDGE('',*,*,#349215,.T.); +#349215 = EDGE_CURVE('',#349183,#349216,#349218,.T.); +#349216 = VERTEX_POINT('',#349217); +#349217 = CARTESIAN_POINT('',(148.42,-133.885,-4.E-02)); +#349218 = LINE('',#349219,#349220); +#349219 = CARTESIAN_POINT('',(148.42,-133.515,-4.E-02)); +#349220 = VECTOR('',#349221,1.); +#349221 = DIRECTION('',(0.,-1.,0.)); +#349222 = ORIENTED_EDGE('',*,*,#349223,.F.); +#349223 = EDGE_CURVE('',#349224,#349216,#349226,.T.); +#349224 = VERTEX_POINT('',#349225); +#349225 = CARTESIAN_POINT('',(148.42,-133.885,0.)); +#349226 = LINE('',#349227,#349228); +#349227 = CARTESIAN_POINT('',(148.42,-133.885,0.)); +#349228 = VECTOR('',#349229,1.); +#349229 = DIRECTION('',(0.,0.,-1.)); +#349230 = ORIENTED_EDGE('',*,*,#349231,.F.); +#349231 = EDGE_CURVE('',#349192,#349224,#349232,.T.); +#349232 = LINE('',#349233,#349234); +#349233 = CARTESIAN_POINT('',(148.42,-133.515,0.)); +#349234 = VECTOR('',#349235,1.); +#349235 = DIRECTION('',(0.,-1.,0.)); +#349236 = PLANE('',#349237); +#349237 = AXIS2_PLACEMENT_3D('',#349238,#349239,#349240); +#349238 = CARTESIAN_POINT('',(148.42,-133.515,0.)); +#349239 = DIRECTION('',(-1.,-0.,-0.)); +#349240 = DIRECTION('',(0.,-1.,0.)); +#349241 = ADVANCED_FACE('',(#349242),#349269,.T.); +#349242 = FACE_BOUND('',#349243,.F.); +#349243 = EDGE_LOOP('',(#349244,#349245,#349254,#349262)); +#349244 = ORIENTED_EDGE('',*,*,#349223,.T.); +#349245 = ORIENTED_EDGE('',*,*,#349246,.T.); +#349246 = EDGE_CURVE('',#349216,#349247,#349249,.T.); +#349247 = VERTEX_POINT('',#349248); +#349248 = CARTESIAN_POINT('',(148.285,-134.02,-4.E-02)); +#349249 = CIRCLE('',#349250,0.135001418495); +#349250 = AXIS2_PLACEMENT_3D('',#349251,#349252,#349253); +#349251 = CARTESIAN_POINT('',(148.28499858151,-133.8849985815,-4.E-02)); +#349252 = DIRECTION('',(0.,0.,-1.)); +#349253 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#349254 = ORIENTED_EDGE('',*,*,#349255,.F.); +#349255 = EDGE_CURVE('',#349256,#349247,#349258,.T.); +#349256 = VERTEX_POINT('',#349257); +#349257 = CARTESIAN_POINT('',(148.285,-134.02,0.)); +#349258 = LINE('',#349259,#349260); +#349259 = CARTESIAN_POINT('',(148.285,-134.02,0.)); +#349260 = VECTOR('',#349261,1.); +#349261 = DIRECTION('',(0.,0.,-1.)); +#349262 = ORIENTED_EDGE('',*,*,#349263,.F.); +#349263 = EDGE_CURVE('',#349224,#349256,#349264,.T.); +#349264 = CIRCLE('',#349265,0.135001418495); +#349265 = AXIS2_PLACEMENT_3D('',#349266,#349267,#349268); +#349266 = CARTESIAN_POINT('',(148.28499858151,-133.8849985815,0.)); +#349267 = DIRECTION('',(0.,0.,-1.)); +#349268 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#349269 = CYLINDRICAL_SURFACE('',#349270,0.135001418495); +#349270 = AXIS2_PLACEMENT_3D('',#349271,#349272,#349273); +#349271 = CARTESIAN_POINT('',(148.28499858151,-133.8849985815,0.)); +#349272 = DIRECTION('',(-0.,-0.,1.)); +#349273 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#349274 = ADVANCED_FACE('',(#349275),#349300,.F.); +#349275 = FACE_BOUND('',#349276,.F.); +#349276 = EDGE_LOOP('',(#349277,#349278,#349286,#349294)); +#349277 = ORIENTED_EDGE('',*,*,#349255,.T.); +#349278 = ORIENTED_EDGE('',*,*,#349279,.T.); +#349279 = EDGE_CURVE('',#349247,#349280,#349282,.T.); +#349280 = VERTEX_POINT('',#349281); +#349281 = CARTESIAN_POINT('',(148.015,-134.02,-4.E-02)); +#349282 = LINE('',#349283,#349284); +#349283 = CARTESIAN_POINT('',(148.285,-134.02,-4.E-02)); +#349284 = VECTOR('',#349285,1.); +#349285 = DIRECTION('',(-1.,0.,0.)); +#349286 = ORIENTED_EDGE('',*,*,#349287,.F.); +#349287 = EDGE_CURVE('',#349288,#349280,#349290,.T.); +#349288 = VERTEX_POINT('',#349289); +#349289 = CARTESIAN_POINT('',(148.015,-134.02,0.)); +#349290 = LINE('',#349291,#349292); +#349291 = CARTESIAN_POINT('',(148.015,-134.02,0.)); +#349292 = VECTOR('',#349293,1.); +#349293 = DIRECTION('',(0.,0.,-1.)); +#349294 = ORIENTED_EDGE('',*,*,#349295,.F.); +#349295 = EDGE_CURVE('',#349256,#349288,#349296,.T.); +#349296 = LINE('',#349297,#349298); +#349297 = CARTESIAN_POINT('',(148.285,-134.02,0.)); +#349298 = VECTOR('',#349299,1.); +#349299 = DIRECTION('',(-1.,0.,0.)); +#349300 = PLANE('',#349301); +#349301 = AXIS2_PLACEMENT_3D('',#349302,#349303,#349304); +#349302 = CARTESIAN_POINT('',(148.285,-134.02,0.)); +#349303 = DIRECTION('',(0.,1.,0.)); +#349304 = DIRECTION('',(-1.,0.,0.)); +#349305 = ADVANCED_FACE('',(#349306),#349333,.T.); +#349306 = FACE_BOUND('',#349307,.F.); +#349307 = EDGE_LOOP('',(#349308,#349309,#349318,#349326)); +#349308 = ORIENTED_EDGE('',*,*,#349287,.T.); +#349309 = ORIENTED_EDGE('',*,*,#349310,.T.); +#349310 = EDGE_CURVE('',#349280,#349311,#349313,.T.); +#349311 = VERTEX_POINT('',#349312); +#349312 = CARTESIAN_POINT('',(147.88,-133.885,-4.E-02)); +#349313 = CIRCLE('',#349314,0.135001418495); +#349314 = AXIS2_PLACEMENT_3D('',#349315,#349316,#349317); +#349315 = CARTESIAN_POINT('',(148.01500141848,-133.8849985815,-4.E-02)); +#349316 = DIRECTION('',(0.,0.,-1.)); +#349317 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#349318 = ORIENTED_EDGE('',*,*,#349319,.F.); +#349319 = EDGE_CURVE('',#349320,#349311,#349322,.T.); +#349320 = VERTEX_POINT('',#349321); +#349321 = CARTESIAN_POINT('',(147.88,-133.885,0.)); +#349322 = LINE('',#349323,#349324); +#349323 = CARTESIAN_POINT('',(147.88,-133.885,0.)); +#349324 = VECTOR('',#349325,1.); +#349325 = DIRECTION('',(0.,0.,-1.)); +#349326 = ORIENTED_EDGE('',*,*,#349327,.F.); +#349327 = EDGE_CURVE('',#349288,#349320,#349328,.T.); +#349328 = CIRCLE('',#349329,0.135001418495); +#349329 = AXIS2_PLACEMENT_3D('',#349330,#349331,#349332); +#349330 = CARTESIAN_POINT('',(148.01500141848,-133.8849985815,0.)); +#349331 = DIRECTION('',(0.,0.,-1.)); +#349332 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#349333 = CYLINDRICAL_SURFACE('',#349334,0.135001418495); +#349334 = AXIS2_PLACEMENT_3D('',#349335,#349336,#349337); +#349335 = CARTESIAN_POINT('',(148.01500141848,-133.8849985815,0.)); +#349336 = DIRECTION('',(-0.,-0.,1.)); +#349337 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#349338 = ADVANCED_FACE('',(#349339),#349355,.F.); +#349339 = FACE_BOUND('',#349340,.F.); +#349340 = EDGE_LOOP('',(#349341,#349342,#349348,#349349)); +#349341 = ORIENTED_EDGE('',*,*,#349319,.T.); +#349342 = ORIENTED_EDGE('',*,*,#349343,.T.); +#349343 = EDGE_CURVE('',#349311,#349111,#349344,.T.); +#349344 = LINE('',#349345,#349346); +#349345 = CARTESIAN_POINT('',(147.88,-133.885,-4.E-02)); +#349346 = VECTOR('',#349347,1.); +#349347 = DIRECTION('',(0.,1.,0.)); +#349348 = ORIENTED_EDGE('',*,*,#349108,.F.); +#349349 = ORIENTED_EDGE('',*,*,#349350,.F.); +#349350 = EDGE_CURVE('',#349320,#349109,#349351,.T.); +#349351 = LINE('',#349352,#349353); +#349352 = CARTESIAN_POINT('',(147.88,-133.885,0.)); +#349353 = VECTOR('',#349354,1.); +#349354 = DIRECTION('',(0.,1.,0.)); +#349355 = PLANE('',#349356); +#349356 = AXIS2_PLACEMENT_3D('',#349357,#349358,#349359); +#349357 = CARTESIAN_POINT('',(147.88,-133.885,0.)); +#349358 = DIRECTION('',(1.,-0.,0.)); +#349359 = DIRECTION('',(0.,1.,0.)); +#349360 = ADVANCED_FACE('',(#349361),#349371,.F.); +#349361 = FACE_BOUND('',#349362,.F.); +#349362 = EDGE_LOOP('',(#349363,#349364,#349365,#349366,#349367,#349368, + #349369,#349370)); +#349363 = ORIENTED_EDGE('',*,*,#349135,.T.); +#349364 = ORIENTED_EDGE('',*,*,#349167,.T.); +#349365 = ORIENTED_EDGE('',*,*,#349199,.T.); +#349366 = ORIENTED_EDGE('',*,*,#349231,.T.); +#349367 = ORIENTED_EDGE('',*,*,#349263,.T.); +#349368 = ORIENTED_EDGE('',*,*,#349295,.T.); +#349369 = ORIENTED_EDGE('',*,*,#349327,.T.); +#349370 = ORIENTED_EDGE('',*,*,#349350,.T.); +#349371 = PLANE('',#349372); +#349372 = AXIS2_PLACEMENT_3D('',#349373,#349374,#349375); +#349373 = CARTESIAN_POINT('',(0.,0.,0.)); +#349374 = DIRECTION('',(-0.,-0.,-1.)); +#349375 = DIRECTION('',(-1.,0.,0.)); +#349376 = ADVANCED_FACE('',(#349377),#349387,.T.); +#349377 = FACE_BOUND('',#349378,.T.); +#349378 = EDGE_LOOP('',(#349379,#349380,#349381,#349382,#349383,#349384, + #349385,#349386)); +#349379 = ORIENTED_EDGE('',*,*,#349118,.T.); +#349380 = ORIENTED_EDGE('',*,*,#349151,.T.); +#349381 = ORIENTED_EDGE('',*,*,#349182,.T.); +#349382 = ORIENTED_EDGE('',*,*,#349215,.T.); +#349383 = ORIENTED_EDGE('',*,*,#349246,.T.); +#349384 = ORIENTED_EDGE('',*,*,#349279,.T.); +#349385 = ORIENTED_EDGE('',*,*,#349310,.T.); +#349386 = ORIENTED_EDGE('',*,*,#349343,.T.); +#349387 = PLANE('',#349388); +#349388 = AXIS2_PLACEMENT_3D('',#349389,#349390,#349391); +#349389 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#349390 = DIRECTION('',(-0.,-0.,-1.)); +#349391 = DIRECTION('',(-1.,0.,0.)); +#349392 = MANIFOLD_SOLID_BREP('',#349393); +#349393 = CLOSED_SHELL('',(#349394,#349436,#349467,#349500,#349531, + #349564,#349595,#349628,#349650,#349666)); +#349394 = ADVANCED_FACE('',(#349395),#349431,.T.); +#349395 = FACE_BOUND('',#349396,.F.); +#349396 = EDGE_LOOP('',(#349397,#349407,#349416,#349424)); +#349397 = ORIENTED_EDGE('',*,*,#349398,.T.); +#349398 = EDGE_CURVE('',#349399,#349401,#349403,.T.); +#349399 = VERTEX_POINT('',#349400); +#349400 = CARTESIAN_POINT('',(146.875,-132.1,0.)); +#349401 = VERTEX_POINT('',#349402); +#349402 = CARTESIAN_POINT('',(146.875,-132.1,-4.E-02)); +#349403 = LINE('',#349404,#349405); +#349404 = CARTESIAN_POINT('',(146.875,-132.1,0.)); +#349405 = VECTOR('',#349406,1.); +#349406 = DIRECTION('',(0.,0.,-1.)); +#349407 = ORIENTED_EDGE('',*,*,#349408,.T.); +#349408 = EDGE_CURVE('',#349401,#349409,#349411,.T.); +#349409 = VERTEX_POINT('',#349410); +#349410 = CARTESIAN_POINT('',(146.9875,-131.9875,-4.E-02)); +#349411 = CIRCLE('',#349412,0.112498336922); +#349412 = AXIS2_PLACEMENT_3D('',#349413,#349414,#349415); +#349413 = CARTESIAN_POINT('',(146.98749833691,-132.0999983369,-4.E-02)); +#349414 = DIRECTION('',(0.,0.,-1.)); +#349415 = DIRECTION('',(-0.999999999891,-1.478324192951E-05,-0.)); +#349416 = ORIENTED_EDGE('',*,*,#349417,.F.); +#349417 = EDGE_CURVE('',#349418,#349409,#349420,.T.); +#349418 = VERTEX_POINT('',#349419); +#349419 = CARTESIAN_POINT('',(146.9875,-131.9875,0.)); +#349420 = LINE('',#349421,#349422); +#349421 = CARTESIAN_POINT('',(146.9875,-131.9875,0.)); +#349422 = VECTOR('',#349423,1.); +#349423 = DIRECTION('',(0.,0.,-1.)); +#349424 = ORIENTED_EDGE('',*,*,#349425,.F.); +#349425 = EDGE_CURVE('',#349399,#349418,#349426,.T.); +#349426 = CIRCLE('',#349427,0.112498336922); +#349427 = AXIS2_PLACEMENT_3D('',#349428,#349429,#349430); +#349428 = CARTESIAN_POINT('',(146.98749833691,-132.0999983369,0.)); +#349429 = DIRECTION('',(0.,0.,-1.)); +#349430 = DIRECTION('',(-0.999999999891,-1.478324192951E-05,-0.)); +#349431 = CYLINDRICAL_SURFACE('',#349432,0.112498336922); +#349432 = AXIS2_PLACEMENT_3D('',#349433,#349434,#349435); +#349433 = CARTESIAN_POINT('',(146.98749833691,-132.0999983369,0.)); +#349434 = DIRECTION('',(-0.,-0.,1.)); +#349435 = DIRECTION('',(-0.999999999891,-1.478324192951E-05,-0.)); +#349436 = ADVANCED_FACE('',(#349437),#349462,.F.); +#349437 = FACE_BOUND('',#349438,.F.); +#349438 = EDGE_LOOP('',(#349439,#349440,#349448,#349456)); +#349439 = ORIENTED_EDGE('',*,*,#349417,.T.); +#349440 = ORIENTED_EDGE('',*,*,#349441,.T.); +#349441 = EDGE_CURVE('',#349409,#349442,#349444,.T.); +#349442 = VERTEX_POINT('',#349443); +#349443 = CARTESIAN_POINT('',(147.2125,-131.9875,-4.E-02)); +#349444 = LINE('',#349445,#349446); +#349445 = CARTESIAN_POINT('',(146.9875,-131.9875,-4.E-02)); +#349446 = VECTOR('',#349447,1.); +#349447 = DIRECTION('',(1.,0.,0.)); +#349448 = ORIENTED_EDGE('',*,*,#349449,.F.); +#349449 = EDGE_CURVE('',#349450,#349442,#349452,.T.); +#349450 = VERTEX_POINT('',#349451); +#349451 = CARTESIAN_POINT('',(147.2125,-131.9875,0.)); +#349452 = LINE('',#349453,#349454); +#349453 = CARTESIAN_POINT('',(147.2125,-131.9875,0.)); +#349454 = VECTOR('',#349455,1.); +#349455 = DIRECTION('',(0.,0.,-1.)); +#349456 = ORIENTED_EDGE('',*,*,#349457,.F.); +#349457 = EDGE_CURVE('',#349418,#349450,#349458,.T.); +#349458 = LINE('',#349459,#349460); +#349459 = CARTESIAN_POINT('',(146.9875,-131.9875,0.)); +#349460 = VECTOR('',#349461,1.); +#349461 = DIRECTION('',(1.,0.,0.)); +#349462 = PLANE('',#349463); +#349463 = AXIS2_PLACEMENT_3D('',#349464,#349465,#349466); +#349464 = CARTESIAN_POINT('',(146.9875,-131.9875,0.)); +#349465 = DIRECTION('',(0.,-1.,0.)); +#349466 = DIRECTION('',(1.,0.,0.)); +#349467 = ADVANCED_FACE('',(#349468),#349495,.T.); +#349468 = FACE_BOUND('',#349469,.F.); +#349469 = EDGE_LOOP('',(#349470,#349471,#349480,#349488)); +#349470 = ORIENTED_EDGE('',*,*,#349449,.T.); +#349471 = ORIENTED_EDGE('',*,*,#349472,.T.); +#349472 = EDGE_CURVE('',#349442,#349473,#349475,.T.); +#349473 = VERTEX_POINT('',#349474); +#349474 = CARTESIAN_POINT('',(147.325,-132.1,-4.E-02)); +#349475 = CIRCLE('',#349476,0.112498336922); +#349476 = AXIS2_PLACEMENT_3D('',#349477,#349478,#349479); +#349477 = CARTESIAN_POINT('',(147.21250166309,-132.0999983369,-4.E-02)); +#349478 = DIRECTION('',(0.,0.,-1.)); +#349479 = DIRECTION('',(-1.478324192951E-05,0.999999999891,0.)); +#349480 = ORIENTED_EDGE('',*,*,#349481,.F.); +#349481 = EDGE_CURVE('',#349482,#349473,#349484,.T.); +#349482 = VERTEX_POINT('',#349483); +#349483 = CARTESIAN_POINT('',(147.325,-132.1,0.)); +#349484 = LINE('',#349485,#349486); +#349485 = CARTESIAN_POINT('',(147.325,-132.1,0.)); +#349486 = VECTOR('',#349487,1.); +#349487 = DIRECTION('',(0.,0.,-1.)); +#349488 = ORIENTED_EDGE('',*,*,#349489,.F.); +#349489 = EDGE_CURVE('',#349450,#349482,#349490,.T.); +#349490 = CIRCLE('',#349491,0.112498336922); +#349491 = AXIS2_PLACEMENT_3D('',#349492,#349493,#349494); +#349492 = CARTESIAN_POINT('',(147.21250166309,-132.0999983369,0.)); +#349493 = DIRECTION('',(0.,0.,-1.)); +#349494 = DIRECTION('',(-1.478324192951E-05,0.999999999891,0.)); +#349495 = CYLINDRICAL_SURFACE('',#349496,0.112498336922); +#349496 = AXIS2_PLACEMENT_3D('',#349497,#349498,#349499); +#349497 = CARTESIAN_POINT('',(147.21250166309,-132.0999983369,0.)); +#349498 = DIRECTION('',(-0.,-0.,1.)); +#349499 = DIRECTION('',(-1.478324192951E-05,0.999999999891,0.)); +#349500 = ADVANCED_FACE('',(#349501),#349526,.F.); +#349501 = FACE_BOUND('',#349502,.F.); +#349502 = EDGE_LOOP('',(#349503,#349504,#349512,#349520)); +#349503 = ORIENTED_EDGE('',*,*,#349481,.T.); +#349504 = ORIENTED_EDGE('',*,*,#349505,.T.); +#349505 = EDGE_CURVE('',#349473,#349506,#349508,.T.); +#349506 = VERTEX_POINT('',#349507); +#349507 = CARTESIAN_POINT('',(147.325,-132.8,-4.E-02)); +#349508 = LINE('',#349509,#349510); +#349509 = CARTESIAN_POINT('',(147.325,-132.1,-4.E-02)); +#349510 = VECTOR('',#349511,1.); +#349511 = DIRECTION('',(0.,-1.,0.)); +#349512 = ORIENTED_EDGE('',*,*,#349513,.F.); +#349513 = EDGE_CURVE('',#349514,#349506,#349516,.T.); +#349514 = VERTEX_POINT('',#349515); +#349515 = CARTESIAN_POINT('',(147.325,-132.8,0.)); +#349516 = LINE('',#349517,#349518); +#349517 = CARTESIAN_POINT('',(147.325,-132.8,0.)); +#349518 = VECTOR('',#349519,1.); +#349519 = DIRECTION('',(0.,0.,-1.)); +#349520 = ORIENTED_EDGE('',*,*,#349521,.F.); +#349521 = EDGE_CURVE('',#349482,#349514,#349522,.T.); +#349522 = LINE('',#349523,#349524); +#349523 = CARTESIAN_POINT('',(147.325,-132.1,0.)); +#349524 = VECTOR('',#349525,1.); +#349525 = DIRECTION('',(0.,-1.,0.)); +#349526 = PLANE('',#349527); +#349527 = AXIS2_PLACEMENT_3D('',#349528,#349529,#349530); +#349528 = CARTESIAN_POINT('',(147.325,-132.1,0.)); +#349529 = DIRECTION('',(-1.,-0.,-0.)); +#349530 = DIRECTION('',(0.,-1.,0.)); +#349531 = ADVANCED_FACE('',(#349532),#349559,.T.); +#349532 = FACE_BOUND('',#349533,.F.); +#349533 = EDGE_LOOP('',(#349534,#349535,#349544,#349552)); +#349534 = ORIENTED_EDGE('',*,*,#349513,.T.); +#349535 = ORIENTED_EDGE('',*,*,#349536,.T.); +#349536 = EDGE_CURVE('',#349506,#349537,#349539,.T.); +#349537 = VERTEX_POINT('',#349538); +#349538 = CARTESIAN_POINT('',(147.2125,-132.9125,-4.E-02)); +#349539 = CIRCLE('',#349540,0.112498336922); +#349540 = AXIS2_PLACEMENT_3D('',#349541,#349542,#349543); +#349541 = CARTESIAN_POINT('',(147.21250166309,-132.800001663,-4.E-02)); +#349542 = DIRECTION('',(0.,0.,-1.)); +#349543 = DIRECTION('',(0.999999999891,1.47832419295E-05,0.)); +#349544 = ORIENTED_EDGE('',*,*,#349545,.F.); +#349545 = EDGE_CURVE('',#349546,#349537,#349548,.T.); +#349546 = VERTEX_POINT('',#349547); +#349547 = CARTESIAN_POINT('',(147.2125,-132.9125,0.)); +#349548 = LINE('',#349549,#349550); +#349549 = CARTESIAN_POINT('',(147.2125,-132.9125,0.)); +#349550 = VECTOR('',#349551,1.); +#349551 = DIRECTION('',(0.,0.,-1.)); +#349552 = ORIENTED_EDGE('',*,*,#349553,.F.); +#349553 = EDGE_CURVE('',#349514,#349546,#349554,.T.); +#349554 = CIRCLE('',#349555,0.112498336922); +#349555 = AXIS2_PLACEMENT_3D('',#349556,#349557,#349558); +#349556 = CARTESIAN_POINT('',(147.21250166309,-132.800001663,0.)); +#349557 = DIRECTION('',(0.,0.,-1.)); +#349558 = DIRECTION('',(0.999999999891,1.47832419295E-05,0.)); +#349559 = CYLINDRICAL_SURFACE('',#349560,0.112498336922); +#349560 = AXIS2_PLACEMENT_3D('',#349561,#349562,#349563); +#349561 = CARTESIAN_POINT('',(147.21250166309,-132.800001663,0.)); +#349562 = DIRECTION('',(-0.,-0.,1.)); +#349563 = DIRECTION('',(0.999999999891,1.47832419295E-05,0.)); +#349564 = ADVANCED_FACE('',(#349565),#349590,.F.); +#349565 = FACE_BOUND('',#349566,.F.); +#349566 = EDGE_LOOP('',(#349567,#349568,#349576,#349584)); +#349567 = ORIENTED_EDGE('',*,*,#349545,.T.); +#349568 = ORIENTED_EDGE('',*,*,#349569,.T.); +#349569 = EDGE_CURVE('',#349537,#349570,#349572,.T.); +#349570 = VERTEX_POINT('',#349571); +#349571 = CARTESIAN_POINT('',(146.9875,-132.9125,-4.E-02)); +#349572 = LINE('',#349573,#349574); +#349573 = CARTESIAN_POINT('',(147.2125,-132.9125,-4.E-02)); +#349574 = VECTOR('',#349575,1.); +#349575 = DIRECTION('',(-1.,0.,0.)); +#349576 = ORIENTED_EDGE('',*,*,#349577,.F.); +#349577 = EDGE_CURVE('',#349578,#349570,#349580,.T.); +#349578 = VERTEX_POINT('',#349579); +#349579 = CARTESIAN_POINT('',(146.9875,-132.9125,0.)); +#349580 = LINE('',#349581,#349582); +#349581 = CARTESIAN_POINT('',(146.9875,-132.9125,0.)); +#349582 = VECTOR('',#349583,1.); +#349583 = DIRECTION('',(0.,0.,-1.)); +#349584 = ORIENTED_EDGE('',*,*,#349585,.F.); +#349585 = EDGE_CURVE('',#349546,#349578,#349586,.T.); +#349586 = LINE('',#349587,#349588); +#349587 = CARTESIAN_POINT('',(147.2125,-132.9125,0.)); +#349588 = VECTOR('',#349589,1.); +#349589 = DIRECTION('',(-1.,0.,0.)); +#349590 = PLANE('',#349591); +#349591 = AXIS2_PLACEMENT_3D('',#349592,#349593,#349594); +#349592 = CARTESIAN_POINT('',(147.2125,-132.9125,0.)); +#349593 = DIRECTION('',(0.,1.,0.)); +#349594 = DIRECTION('',(-1.,0.,0.)); +#349595 = ADVANCED_FACE('',(#349596),#349623,.T.); +#349596 = FACE_BOUND('',#349597,.F.); +#349597 = EDGE_LOOP('',(#349598,#349599,#349608,#349616)); +#349598 = ORIENTED_EDGE('',*,*,#349577,.T.); +#349599 = ORIENTED_EDGE('',*,*,#349600,.T.); +#349600 = EDGE_CURVE('',#349570,#349601,#349603,.T.); +#349601 = VERTEX_POINT('',#349602); +#349602 = CARTESIAN_POINT('',(146.875,-132.8,-4.E-02)); +#349603 = CIRCLE('',#349604,0.112498336922); +#349604 = AXIS2_PLACEMENT_3D('',#349605,#349606,#349607); +#349605 = CARTESIAN_POINT('',(146.98749833691,-132.800001663,-4.E-02)); +#349606 = DIRECTION('',(0.,0.,-1.)); +#349607 = DIRECTION('',(1.478324218215E-05,-0.999999999891,0.)); +#349608 = ORIENTED_EDGE('',*,*,#349609,.F.); +#349609 = EDGE_CURVE('',#349610,#349601,#349612,.T.); +#349610 = VERTEX_POINT('',#349611); +#349611 = CARTESIAN_POINT('',(146.875,-132.8,0.)); +#349612 = LINE('',#349613,#349614); +#349613 = CARTESIAN_POINT('',(146.875,-132.8,0.)); +#349614 = VECTOR('',#349615,1.); +#349615 = DIRECTION('',(0.,0.,-1.)); +#349616 = ORIENTED_EDGE('',*,*,#349617,.F.); +#349617 = EDGE_CURVE('',#349578,#349610,#349618,.T.); +#349618 = CIRCLE('',#349619,0.112498336922); +#349619 = AXIS2_PLACEMENT_3D('',#349620,#349621,#349622); +#349620 = CARTESIAN_POINT('',(146.98749833691,-132.800001663,0.)); +#349621 = DIRECTION('',(0.,0.,-1.)); +#349622 = DIRECTION('',(1.478324218215E-05,-0.999999999891,0.)); +#349623 = CYLINDRICAL_SURFACE('',#349624,0.112498336922); +#349624 = AXIS2_PLACEMENT_3D('',#349625,#349626,#349627); +#349625 = CARTESIAN_POINT('',(146.98749833691,-132.800001663,0.)); +#349626 = DIRECTION('',(-0.,-0.,1.)); +#349627 = DIRECTION('',(1.478324218215E-05,-0.999999999891,0.)); +#349628 = ADVANCED_FACE('',(#349629),#349645,.F.); +#349629 = FACE_BOUND('',#349630,.F.); +#349630 = EDGE_LOOP('',(#349631,#349632,#349638,#349639)); +#349631 = ORIENTED_EDGE('',*,*,#349609,.T.); +#349632 = ORIENTED_EDGE('',*,*,#349633,.T.); +#349633 = EDGE_CURVE('',#349601,#349401,#349634,.T.); +#349634 = LINE('',#349635,#349636); +#349635 = CARTESIAN_POINT('',(146.875,-132.8,-4.E-02)); +#349636 = VECTOR('',#349637,1.); +#349637 = DIRECTION('',(0.,1.,0.)); +#349638 = ORIENTED_EDGE('',*,*,#349398,.F.); +#349639 = ORIENTED_EDGE('',*,*,#349640,.F.); +#349640 = EDGE_CURVE('',#349610,#349399,#349641,.T.); +#349641 = LINE('',#349642,#349643); +#349642 = CARTESIAN_POINT('',(146.875,-132.8,0.)); +#349643 = VECTOR('',#349644,1.); +#349644 = DIRECTION('',(0.,1.,0.)); +#349645 = PLANE('',#349646); +#349646 = AXIS2_PLACEMENT_3D('',#349647,#349648,#349649); +#349647 = CARTESIAN_POINT('',(146.875,-132.8,0.)); +#349648 = DIRECTION('',(1.,-0.,0.)); +#349649 = DIRECTION('',(0.,1.,0.)); +#349650 = ADVANCED_FACE('',(#349651),#349661,.F.); +#349651 = FACE_BOUND('',#349652,.F.); +#349652 = EDGE_LOOP('',(#349653,#349654,#349655,#349656,#349657,#349658, + #349659,#349660)); +#349653 = ORIENTED_EDGE('',*,*,#349425,.T.); +#349654 = ORIENTED_EDGE('',*,*,#349457,.T.); +#349655 = ORIENTED_EDGE('',*,*,#349489,.T.); +#349656 = ORIENTED_EDGE('',*,*,#349521,.T.); +#349657 = ORIENTED_EDGE('',*,*,#349553,.T.); +#349658 = ORIENTED_EDGE('',*,*,#349585,.T.); +#349659 = ORIENTED_EDGE('',*,*,#349617,.T.); +#349660 = ORIENTED_EDGE('',*,*,#349640,.T.); +#349661 = PLANE('',#349662); +#349662 = AXIS2_PLACEMENT_3D('',#349663,#349664,#349665); +#349663 = CARTESIAN_POINT('',(0.,0.,0.)); +#349664 = DIRECTION('',(-0.,-0.,-1.)); +#349665 = DIRECTION('',(-1.,0.,0.)); +#349666 = ADVANCED_FACE('',(#349667),#349677,.T.); +#349667 = FACE_BOUND('',#349668,.T.); +#349668 = EDGE_LOOP('',(#349669,#349670,#349671,#349672,#349673,#349674, + #349675,#349676)); +#349669 = ORIENTED_EDGE('',*,*,#349408,.T.); +#349670 = ORIENTED_EDGE('',*,*,#349441,.T.); +#349671 = ORIENTED_EDGE('',*,*,#349472,.T.); +#349672 = ORIENTED_EDGE('',*,*,#349505,.T.); +#349673 = ORIENTED_EDGE('',*,*,#349536,.T.); +#349674 = ORIENTED_EDGE('',*,*,#349569,.T.); +#349675 = ORIENTED_EDGE('',*,*,#349600,.T.); +#349676 = ORIENTED_EDGE('',*,*,#349633,.T.); +#349677 = PLANE('',#349678); +#349678 = AXIS2_PLACEMENT_3D('',#349679,#349680,#349681); +#349679 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#349680 = DIRECTION('',(-0.,-0.,-1.)); +#349681 = DIRECTION('',(-1.,0.,0.)); +#349682 = MANIFOLD_SOLID_BREP('',#349683); +#349683 = CLOSED_SHELL('',(#349684,#349724,#349755,#349786,#349808, + #349820)); +#349684 = ADVANCED_FACE('',(#349685),#349719,.T.); +#349685 = FACE_BOUND('',#349686,.T.); +#349686 = EDGE_LOOP('',(#349687,#349697,#349705,#349713)); +#349687 = ORIENTED_EDGE('',*,*,#349688,.T.); +#349688 = EDGE_CURVE('',#349689,#349691,#349693,.T.); +#349689 = VERTEX_POINT('',#349690); +#349690 = CARTESIAN_POINT('',(146.,-70.18,1.51)); +#349691 = VERTEX_POINT('',#349692); +#349692 = CARTESIAN_POINT('',(146.,-70.18,1.55)); +#349693 = LINE('',#349694,#349695); +#349694 = CARTESIAN_POINT('',(146.,-70.18,1.51)); +#349695 = VECTOR('',#349696,1.); +#349696 = DIRECTION('',(0.,0.,1.)); +#349697 = ORIENTED_EDGE('',*,*,#349698,.T.); +#349698 = EDGE_CURVE('',#349691,#349699,#349701,.T.); +#349699 = VERTEX_POINT('',#349700); +#349700 = CARTESIAN_POINT('',(146.,-69.28,1.55)); +#349701 = LINE('',#349702,#349703); +#349702 = CARTESIAN_POINT('',(146.,-70.18,1.55)); +#349703 = VECTOR('',#349704,1.); +#349704 = DIRECTION('',(0.,1.,0.)); +#349705 = ORIENTED_EDGE('',*,*,#349706,.F.); +#349706 = EDGE_CURVE('',#349707,#349699,#349709,.T.); +#349707 = VERTEX_POINT('',#349708); +#349708 = CARTESIAN_POINT('',(146.,-69.28,1.51)); +#349709 = LINE('',#349710,#349711); +#349710 = CARTESIAN_POINT('',(146.,-69.28,1.51)); +#349711 = VECTOR('',#349712,1.); +#349712 = DIRECTION('',(0.,0.,1.)); +#349713 = ORIENTED_EDGE('',*,*,#349714,.F.); +#349714 = EDGE_CURVE('',#349689,#349707,#349715,.T.); +#349715 = LINE('',#349716,#349717); +#349716 = CARTESIAN_POINT('',(146.,-70.18,1.51)); +#349717 = VECTOR('',#349718,1.); +#349718 = DIRECTION('',(0.,1.,0.)); +#349719 = PLANE('',#349720); +#349720 = AXIS2_PLACEMENT_3D('',#349721,#349722,#349723); +#349721 = CARTESIAN_POINT('',(146.,-70.18,1.51)); +#349722 = DIRECTION('',(-1.,0.,0.)); +#349723 = DIRECTION('',(0.,1.,0.)); +#349724 = ADVANCED_FACE('',(#349725),#349750,.T.); +#349725 = FACE_BOUND('',#349726,.T.); +#349726 = EDGE_LOOP('',(#349727,#349728,#349736,#349744)); +#349727 = ORIENTED_EDGE('',*,*,#349706,.T.); +#349728 = ORIENTED_EDGE('',*,*,#349729,.T.); +#349729 = EDGE_CURVE('',#349699,#349730,#349732,.T.); +#349730 = VERTEX_POINT('',#349731); +#349731 = CARTESIAN_POINT('',(147.5,-69.28,1.55)); +#349732 = LINE('',#349733,#349734); +#349733 = CARTESIAN_POINT('',(146.,-69.28,1.55)); +#349734 = VECTOR('',#349735,1.); +#349735 = DIRECTION('',(1.,0.,0.)); +#349736 = ORIENTED_EDGE('',*,*,#349737,.F.); +#349737 = EDGE_CURVE('',#349738,#349730,#349740,.T.); +#349738 = VERTEX_POINT('',#349739); +#349739 = CARTESIAN_POINT('',(147.5,-69.28,1.51)); +#349740 = LINE('',#349741,#349742); +#349741 = CARTESIAN_POINT('',(147.5,-69.28,1.51)); +#349742 = VECTOR('',#349743,1.); +#349743 = DIRECTION('',(0.,0.,1.)); +#349744 = ORIENTED_EDGE('',*,*,#349745,.F.); +#349745 = EDGE_CURVE('',#349707,#349738,#349746,.T.); +#349746 = LINE('',#349747,#349748); +#349747 = CARTESIAN_POINT('',(146.,-69.28,1.51)); +#349748 = VECTOR('',#349749,1.); +#349749 = DIRECTION('',(1.,0.,0.)); +#349750 = PLANE('',#349751); +#349751 = AXIS2_PLACEMENT_3D('',#349752,#349753,#349754); +#349752 = CARTESIAN_POINT('',(146.,-69.28,1.51)); +#349753 = DIRECTION('',(0.,1.,0.)); +#349754 = DIRECTION('',(1.,0.,0.)); +#349755 = ADVANCED_FACE('',(#349756),#349781,.T.); +#349756 = FACE_BOUND('',#349757,.T.); +#349757 = EDGE_LOOP('',(#349758,#349759,#349767,#349775)); +#349758 = ORIENTED_EDGE('',*,*,#349737,.T.); +#349759 = ORIENTED_EDGE('',*,*,#349760,.T.); +#349760 = EDGE_CURVE('',#349730,#349761,#349763,.T.); +#349761 = VERTEX_POINT('',#349762); +#349762 = CARTESIAN_POINT('',(147.5,-70.18,1.55)); +#349763 = LINE('',#349764,#349765); +#349764 = CARTESIAN_POINT('',(147.5,-69.28,1.55)); +#349765 = VECTOR('',#349766,1.); +#349766 = DIRECTION('',(0.,-1.,0.)); +#349767 = ORIENTED_EDGE('',*,*,#349768,.F.); +#349768 = EDGE_CURVE('',#349769,#349761,#349771,.T.); +#349769 = VERTEX_POINT('',#349770); +#349770 = CARTESIAN_POINT('',(147.5,-70.18,1.51)); +#349771 = LINE('',#349772,#349773); +#349772 = CARTESIAN_POINT('',(147.5,-70.18,1.51)); +#349773 = VECTOR('',#349774,1.); +#349774 = DIRECTION('',(0.,0.,1.)); +#349775 = ORIENTED_EDGE('',*,*,#349776,.F.); +#349776 = EDGE_CURVE('',#349738,#349769,#349777,.T.); +#349777 = LINE('',#349778,#349779); +#349778 = CARTESIAN_POINT('',(147.5,-69.28,1.51)); +#349779 = VECTOR('',#349780,1.); +#349780 = DIRECTION('',(0.,-1.,0.)); +#349781 = PLANE('',#349782); +#349782 = AXIS2_PLACEMENT_3D('',#349783,#349784,#349785); +#349783 = CARTESIAN_POINT('',(147.5,-69.28,1.51)); +#349784 = DIRECTION('',(1.,0.,-0.)); +#349785 = DIRECTION('',(0.,-1.,0.)); +#349786 = ADVANCED_FACE('',(#349787),#349803,.T.); +#349787 = FACE_BOUND('',#349788,.T.); +#349788 = EDGE_LOOP('',(#349789,#349790,#349796,#349797)); +#349789 = ORIENTED_EDGE('',*,*,#349768,.T.); +#349790 = ORIENTED_EDGE('',*,*,#349791,.T.); +#349791 = EDGE_CURVE('',#349761,#349691,#349792,.T.); +#349792 = LINE('',#349793,#349794); +#349793 = CARTESIAN_POINT('',(147.5,-70.18,1.55)); +#349794 = VECTOR('',#349795,1.); +#349795 = DIRECTION('',(-1.,0.,0.)); +#349796 = ORIENTED_EDGE('',*,*,#349688,.F.); +#349797 = ORIENTED_EDGE('',*,*,#349798,.F.); +#349798 = EDGE_CURVE('',#349769,#349689,#349799,.T.); +#349799 = LINE('',#349800,#349801); +#349800 = CARTESIAN_POINT('',(147.5,-70.18,1.51)); +#349801 = VECTOR('',#349802,1.); +#349802 = DIRECTION('',(-1.,0.,0.)); +#349803 = PLANE('',#349804); +#349804 = AXIS2_PLACEMENT_3D('',#349805,#349806,#349807); +#349805 = CARTESIAN_POINT('',(147.5,-70.18,1.51)); +#349806 = DIRECTION('',(0.,-1.,0.)); +#349807 = DIRECTION('',(-1.,0.,0.)); +#349808 = ADVANCED_FACE('',(#349809),#349815,.F.); +#349809 = FACE_BOUND('',#349810,.T.); +#349810 = EDGE_LOOP('',(#349811,#349812,#349813,#349814)); +#349811 = ORIENTED_EDGE('',*,*,#349714,.T.); +#349812 = ORIENTED_EDGE('',*,*,#349745,.T.); +#349813 = ORIENTED_EDGE('',*,*,#349776,.T.); +#349814 = ORIENTED_EDGE('',*,*,#349798,.T.); +#349815 = PLANE('',#349816); +#349816 = AXIS2_PLACEMENT_3D('',#349817,#349818,#349819); +#349817 = CARTESIAN_POINT('',(0.,0.,1.51)); +#349818 = DIRECTION('',(0.,0.,1.)); +#349819 = DIRECTION('',(1.,0.,-0.)); +#349820 = ADVANCED_FACE('',(#349821),#349827,.T.); +#349821 = FACE_BOUND('',#349822,.F.); +#349822 = EDGE_LOOP('',(#349823,#349824,#349825,#349826)); +#349823 = ORIENTED_EDGE('',*,*,#349698,.T.); +#349824 = ORIENTED_EDGE('',*,*,#349729,.T.); +#349825 = ORIENTED_EDGE('',*,*,#349760,.T.); +#349826 = ORIENTED_EDGE('',*,*,#349791,.T.); +#349827 = PLANE('',#349828); +#349828 = AXIS2_PLACEMENT_3D('',#349829,#349830,#349831); +#349829 = CARTESIAN_POINT('',(0.,0.,1.55)); +#349830 = DIRECTION('',(0.,0.,1.)); +#349831 = DIRECTION('',(1.,0.,-0.)); +#349832 = MANIFOLD_SOLID_BREP('',#349833); +#349833 = CLOSED_SHELL('',(#349834,#349876,#349907,#349940,#349971, + #350004,#350035,#350068,#350090,#350106)); +#349834 = ADVANCED_FACE('',(#349835),#349871,.T.); +#349835 = FACE_BOUND('',#349836,.F.); +#349836 = EDGE_LOOP('',(#349837,#349847,#349856,#349864)); +#349837 = ORIENTED_EDGE('',*,*,#349838,.T.); +#349838 = EDGE_CURVE('',#349839,#349841,#349843,.T.); +#349839 = VERTEX_POINT('',#349840); +#349840 = CARTESIAN_POINT('',(143.4,-118.125,0.)); +#349841 = VERTEX_POINT('',#349842); +#349842 = CARTESIAN_POINT('',(143.4,-118.125,-4.E-02)); +#349843 = LINE('',#349844,#349845); +#349844 = CARTESIAN_POINT('',(143.4,-118.125,0.)); +#349845 = VECTOR('',#349846,1.); +#349846 = DIRECTION('',(0.,0.,-1.)); +#349847 = ORIENTED_EDGE('',*,*,#349848,.T.); +#349848 = EDGE_CURVE('',#349841,#349849,#349851,.T.); +#349849 = VERTEX_POINT('',#349850); +#349850 = CARTESIAN_POINT('',(143.625,-117.9,-4.E-02)); +#349851 = CIRCLE('',#349852,0.225000087974); +#349852 = AXIS2_PLACEMENT_3D('',#349853,#349854,#349855); +#349853 = CARTESIAN_POINT('',(143.62500008797,-118.1250000879,-4.E-02)); +#349854 = DIRECTION('',(0.,0.,-1.)); +#349855 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#349856 = ORIENTED_EDGE('',*,*,#349857,.F.); +#349857 = EDGE_CURVE('',#349858,#349849,#349860,.T.); +#349858 = VERTEX_POINT('',#349859); +#349859 = CARTESIAN_POINT('',(143.625,-117.9,0.)); +#349860 = LINE('',#349861,#349862); +#349861 = CARTESIAN_POINT('',(143.625,-117.9,0.)); +#349862 = VECTOR('',#349863,1.); +#349863 = DIRECTION('',(0.,0.,-1.)); +#349864 = ORIENTED_EDGE('',*,*,#349865,.F.); +#349865 = EDGE_CURVE('',#349839,#349858,#349866,.T.); +#349866 = CIRCLE('',#349867,0.225000087974); +#349867 = AXIS2_PLACEMENT_3D('',#349868,#349869,#349870); +#349868 = CARTESIAN_POINT('',(143.62500008797,-118.1250000879,0.)); +#349869 = DIRECTION('',(0.,0.,-1.)); +#349870 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#349871 = CYLINDRICAL_SURFACE('',#349872,0.225000087974); +#349872 = AXIS2_PLACEMENT_3D('',#349873,#349874,#349875); +#349873 = CARTESIAN_POINT('',(143.62500008797,-118.1250000879,0.)); +#349874 = DIRECTION('',(-0.,-0.,1.)); +#349875 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#349876 = ADVANCED_FACE('',(#349877),#349902,.F.); +#349877 = FACE_BOUND('',#349878,.F.); +#349878 = EDGE_LOOP('',(#349879,#349880,#349888,#349896)); +#349879 = ORIENTED_EDGE('',*,*,#349857,.T.); +#349880 = ORIENTED_EDGE('',*,*,#349881,.T.); +#349881 = EDGE_CURVE('',#349849,#349882,#349884,.T.); +#349882 = VERTEX_POINT('',#349883); +#349883 = CARTESIAN_POINT('',(144.375,-117.9,-4.E-02)); +#349884 = LINE('',#349885,#349886); +#349885 = CARTESIAN_POINT('',(143.625,-117.9,-4.E-02)); +#349886 = VECTOR('',#349887,1.); +#349887 = DIRECTION('',(1.,0.,0.)); +#349888 = ORIENTED_EDGE('',*,*,#349889,.F.); +#349889 = EDGE_CURVE('',#349890,#349882,#349892,.T.); +#349890 = VERTEX_POINT('',#349891); +#349891 = CARTESIAN_POINT('',(144.375,-117.9,0.)); +#349892 = LINE('',#349893,#349894); +#349893 = CARTESIAN_POINT('',(144.375,-117.9,0.)); +#349894 = VECTOR('',#349895,1.); +#349895 = DIRECTION('',(0.,0.,-1.)); +#349896 = ORIENTED_EDGE('',*,*,#349897,.F.); +#349897 = EDGE_CURVE('',#349858,#349890,#349898,.T.); +#349898 = LINE('',#349899,#349900); +#349899 = CARTESIAN_POINT('',(143.625,-117.9,0.)); +#349900 = VECTOR('',#349901,1.); +#349901 = DIRECTION('',(1.,0.,0.)); +#349902 = PLANE('',#349903); +#349903 = AXIS2_PLACEMENT_3D('',#349904,#349905,#349906); +#349904 = CARTESIAN_POINT('',(143.625,-117.9,0.)); +#349905 = DIRECTION('',(0.,-1.,0.)); +#349906 = DIRECTION('',(1.,0.,0.)); +#349907 = ADVANCED_FACE('',(#349908),#349935,.T.); +#349908 = FACE_BOUND('',#349909,.F.); +#349909 = EDGE_LOOP('',(#349910,#349911,#349920,#349928)); +#349910 = ORIENTED_EDGE('',*,*,#349889,.T.); +#349911 = ORIENTED_EDGE('',*,*,#349912,.T.); +#349912 = EDGE_CURVE('',#349882,#349913,#349915,.T.); +#349913 = VERTEX_POINT('',#349914); +#349914 = CARTESIAN_POINT('',(144.6,-118.125,-4.E-02)); +#349915 = CIRCLE('',#349916,0.225000087974); +#349916 = AXIS2_PLACEMENT_3D('',#349917,#349918,#349919); +#349917 = CARTESIAN_POINT('',(144.37499991202,-118.1250000879,-4.E-02)); +#349918 = DIRECTION('',(0.,0.,-1.)); +#349919 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#349920 = ORIENTED_EDGE('',*,*,#349921,.F.); +#349921 = EDGE_CURVE('',#349922,#349913,#349924,.T.); +#349922 = VERTEX_POINT('',#349923); +#349923 = CARTESIAN_POINT('',(144.6,-118.125,0.)); +#349924 = LINE('',#349925,#349926); +#349925 = CARTESIAN_POINT('',(144.6,-118.125,0.)); +#349926 = VECTOR('',#349927,1.); +#349927 = DIRECTION('',(0.,0.,-1.)); +#349928 = ORIENTED_EDGE('',*,*,#349929,.F.); +#349929 = EDGE_CURVE('',#349890,#349922,#349930,.T.); +#349930 = CIRCLE('',#349931,0.225000087974); +#349931 = AXIS2_PLACEMENT_3D('',#349932,#349933,#349934); +#349932 = CARTESIAN_POINT('',(144.37499991202,-118.1250000879,0.)); +#349933 = DIRECTION('',(0.,0.,-1.)); +#349934 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#349935 = CYLINDRICAL_SURFACE('',#349936,0.225000087974); +#349936 = AXIS2_PLACEMENT_3D('',#349937,#349938,#349939); +#349937 = CARTESIAN_POINT('',(144.37499991202,-118.1250000879,0.)); +#349938 = DIRECTION('',(-0.,-0.,1.)); +#349939 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#349940 = ADVANCED_FACE('',(#349941),#349966,.F.); +#349941 = FACE_BOUND('',#349942,.F.); +#349942 = EDGE_LOOP('',(#349943,#349944,#349952,#349960)); +#349943 = ORIENTED_EDGE('',*,*,#349921,.T.); +#349944 = ORIENTED_EDGE('',*,*,#349945,.T.); +#349945 = EDGE_CURVE('',#349913,#349946,#349948,.T.); +#349946 = VERTEX_POINT('',#349947); +#349947 = CARTESIAN_POINT('',(144.6,-118.575,-4.E-02)); +#349948 = LINE('',#349949,#349950); +#349949 = CARTESIAN_POINT('',(144.6,-118.125,-4.E-02)); +#349950 = VECTOR('',#349951,1.); +#349951 = DIRECTION('',(0.,-1.,0.)); +#349952 = ORIENTED_EDGE('',*,*,#349953,.F.); +#349953 = EDGE_CURVE('',#349954,#349946,#349956,.T.); +#349954 = VERTEX_POINT('',#349955); +#349955 = CARTESIAN_POINT('',(144.6,-118.575,0.)); +#349956 = LINE('',#349957,#349958); +#349957 = CARTESIAN_POINT('',(144.6,-118.575,0.)); +#349958 = VECTOR('',#349959,1.); +#349959 = DIRECTION('',(0.,0.,-1.)); +#349960 = ORIENTED_EDGE('',*,*,#349961,.F.); +#349961 = EDGE_CURVE('',#349922,#349954,#349962,.T.); +#349962 = LINE('',#349963,#349964); +#349963 = CARTESIAN_POINT('',(144.6,-118.125,0.)); +#349964 = VECTOR('',#349965,1.); +#349965 = DIRECTION('',(0.,-1.,0.)); +#349966 = PLANE('',#349967); +#349967 = AXIS2_PLACEMENT_3D('',#349968,#349969,#349970); +#349968 = CARTESIAN_POINT('',(144.6,-118.125,0.)); +#349969 = DIRECTION('',(-1.,-0.,-0.)); +#349970 = DIRECTION('',(0.,-1.,0.)); +#349971 = ADVANCED_FACE('',(#349972),#349999,.T.); +#349972 = FACE_BOUND('',#349973,.F.); +#349973 = EDGE_LOOP('',(#349974,#349975,#349984,#349992)); +#349974 = ORIENTED_EDGE('',*,*,#349953,.T.); +#349975 = ORIENTED_EDGE('',*,*,#349976,.T.); +#349976 = EDGE_CURVE('',#349946,#349977,#349979,.T.); +#349977 = VERTEX_POINT('',#349978); +#349978 = CARTESIAN_POINT('',(144.375,-118.8,-4.E-02)); +#349979 = CIRCLE('',#349980,0.225000087974); +#349980 = AXIS2_PLACEMENT_3D('',#349981,#349982,#349983); +#349981 = CARTESIAN_POINT('',(144.37499991202,-118.574999912,-4.E-02)); +#349982 = DIRECTION('',(0.,0.,-1.)); +#349983 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#349984 = ORIENTED_EDGE('',*,*,#349985,.F.); +#349985 = EDGE_CURVE('',#349986,#349977,#349988,.T.); +#349986 = VERTEX_POINT('',#349987); +#349987 = CARTESIAN_POINT('',(144.375,-118.8,0.)); +#349988 = LINE('',#349989,#349990); +#349989 = CARTESIAN_POINT('',(144.375,-118.8,0.)); +#349990 = VECTOR('',#349991,1.); +#349991 = DIRECTION('',(0.,0.,-1.)); +#349992 = ORIENTED_EDGE('',*,*,#349993,.F.); +#349993 = EDGE_CURVE('',#349954,#349986,#349994,.T.); +#349994 = CIRCLE('',#349995,0.225000087974); +#349995 = AXIS2_PLACEMENT_3D('',#349996,#349997,#349998); +#349996 = CARTESIAN_POINT('',(144.37499991202,-118.574999912,0.)); +#349997 = DIRECTION('',(0.,0.,-1.)); +#349998 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#349999 = CYLINDRICAL_SURFACE('',#350000,0.225000087974); +#350000 = AXIS2_PLACEMENT_3D('',#350001,#350002,#350003); +#350001 = CARTESIAN_POINT('',(144.37499991202,-118.574999912,0.)); +#350002 = DIRECTION('',(-0.,-0.,1.)); +#350003 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#350004 = ADVANCED_FACE('',(#350005),#350030,.F.); +#350005 = FACE_BOUND('',#350006,.F.); +#350006 = EDGE_LOOP('',(#350007,#350008,#350016,#350024)); +#350007 = ORIENTED_EDGE('',*,*,#349985,.T.); +#350008 = ORIENTED_EDGE('',*,*,#350009,.T.); +#350009 = EDGE_CURVE('',#349977,#350010,#350012,.T.); +#350010 = VERTEX_POINT('',#350011); +#350011 = CARTESIAN_POINT('',(143.625,-118.8,-4.E-02)); +#350012 = LINE('',#350013,#350014); +#350013 = CARTESIAN_POINT('',(144.375,-118.8,-4.E-02)); +#350014 = VECTOR('',#350015,1.); +#350015 = DIRECTION('',(-1.,0.,0.)); +#350016 = ORIENTED_EDGE('',*,*,#350017,.F.); +#350017 = EDGE_CURVE('',#350018,#350010,#350020,.T.); +#350018 = VERTEX_POINT('',#350019); +#350019 = CARTESIAN_POINT('',(143.625,-118.8,0.)); +#350020 = LINE('',#350021,#350022); +#350021 = CARTESIAN_POINT('',(143.625,-118.8,0.)); +#350022 = VECTOR('',#350023,1.); +#350023 = DIRECTION('',(0.,0.,-1.)); +#350024 = ORIENTED_EDGE('',*,*,#350025,.F.); +#350025 = EDGE_CURVE('',#349986,#350018,#350026,.T.); +#350026 = LINE('',#350027,#350028); +#350027 = CARTESIAN_POINT('',(144.375,-118.8,0.)); +#350028 = VECTOR('',#350029,1.); +#350029 = DIRECTION('',(-1.,0.,0.)); +#350030 = PLANE('',#350031); +#350031 = AXIS2_PLACEMENT_3D('',#350032,#350033,#350034); +#350032 = CARTESIAN_POINT('',(144.375,-118.8,0.)); +#350033 = DIRECTION('',(0.,1.,0.)); +#350034 = DIRECTION('',(-1.,0.,0.)); +#350035 = ADVANCED_FACE('',(#350036),#350063,.T.); +#350036 = FACE_BOUND('',#350037,.F.); +#350037 = EDGE_LOOP('',(#350038,#350039,#350048,#350056)); +#350038 = ORIENTED_EDGE('',*,*,#350017,.T.); +#350039 = ORIENTED_EDGE('',*,*,#350040,.T.); +#350040 = EDGE_CURVE('',#350010,#350041,#350043,.T.); +#350041 = VERTEX_POINT('',#350042); +#350042 = CARTESIAN_POINT('',(143.4,-118.575,-4.E-02)); +#350043 = CIRCLE('',#350044,0.225000087974); +#350044 = AXIS2_PLACEMENT_3D('',#350045,#350046,#350047); +#350045 = CARTESIAN_POINT('',(143.62500008797,-118.574999912,-4.E-02)); +#350046 = DIRECTION('',(0.,0.,-1.)); +#350047 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#350048 = ORIENTED_EDGE('',*,*,#350049,.F.); +#350049 = EDGE_CURVE('',#350050,#350041,#350052,.T.); +#350050 = VERTEX_POINT('',#350051); +#350051 = CARTESIAN_POINT('',(143.4,-118.575,0.)); +#350052 = LINE('',#350053,#350054); +#350053 = CARTESIAN_POINT('',(143.4,-118.575,0.)); +#350054 = VECTOR('',#350055,1.); +#350055 = DIRECTION('',(0.,0.,-1.)); +#350056 = ORIENTED_EDGE('',*,*,#350057,.F.); +#350057 = EDGE_CURVE('',#350018,#350050,#350058,.T.); +#350058 = CIRCLE('',#350059,0.225000087974); +#350059 = AXIS2_PLACEMENT_3D('',#350060,#350061,#350062); +#350060 = CARTESIAN_POINT('',(143.62500008797,-118.574999912,0.)); +#350061 = DIRECTION('',(0.,0.,-1.)); +#350062 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#350063 = CYLINDRICAL_SURFACE('',#350064,0.225000087974); +#350064 = AXIS2_PLACEMENT_3D('',#350065,#350066,#350067); +#350065 = CARTESIAN_POINT('',(143.62500008797,-118.574999912,0.)); +#350066 = DIRECTION('',(-0.,-0.,1.)); +#350067 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#350068 = ADVANCED_FACE('',(#350069),#350085,.F.); +#350069 = FACE_BOUND('',#350070,.F.); +#350070 = EDGE_LOOP('',(#350071,#350072,#350078,#350079)); +#350071 = ORIENTED_EDGE('',*,*,#350049,.T.); +#350072 = ORIENTED_EDGE('',*,*,#350073,.T.); +#350073 = EDGE_CURVE('',#350041,#349841,#350074,.T.); +#350074 = LINE('',#350075,#350076); +#350075 = CARTESIAN_POINT('',(143.4,-118.575,-4.E-02)); +#350076 = VECTOR('',#350077,1.); +#350077 = DIRECTION('',(0.,1.,0.)); +#350078 = ORIENTED_EDGE('',*,*,#349838,.F.); +#350079 = ORIENTED_EDGE('',*,*,#350080,.F.); +#350080 = EDGE_CURVE('',#350050,#349839,#350081,.T.); +#350081 = LINE('',#350082,#350083); +#350082 = CARTESIAN_POINT('',(143.4,-118.575,0.)); +#350083 = VECTOR('',#350084,1.); +#350084 = DIRECTION('',(0.,1.,0.)); +#350085 = PLANE('',#350086); +#350086 = AXIS2_PLACEMENT_3D('',#350087,#350088,#350089); +#350087 = CARTESIAN_POINT('',(143.4,-118.575,0.)); +#350088 = DIRECTION('',(1.,-0.,0.)); +#350089 = DIRECTION('',(0.,1.,0.)); +#350090 = ADVANCED_FACE('',(#350091),#350101,.F.); +#350091 = FACE_BOUND('',#350092,.F.); +#350092 = EDGE_LOOP('',(#350093,#350094,#350095,#350096,#350097,#350098, + #350099,#350100)); +#350093 = ORIENTED_EDGE('',*,*,#349865,.T.); +#350094 = ORIENTED_EDGE('',*,*,#349897,.T.); +#350095 = ORIENTED_EDGE('',*,*,#349929,.T.); +#350096 = ORIENTED_EDGE('',*,*,#349961,.T.); +#350097 = ORIENTED_EDGE('',*,*,#349993,.T.); +#350098 = ORIENTED_EDGE('',*,*,#350025,.T.); +#350099 = ORIENTED_EDGE('',*,*,#350057,.T.); +#350100 = ORIENTED_EDGE('',*,*,#350080,.T.); +#350101 = PLANE('',#350102); +#350102 = AXIS2_PLACEMENT_3D('',#350103,#350104,#350105); +#350103 = CARTESIAN_POINT('',(0.,0.,0.)); +#350104 = DIRECTION('',(-0.,-0.,-1.)); +#350105 = DIRECTION('',(-1.,0.,0.)); +#350106 = ADVANCED_FACE('',(#350107),#350117,.T.); +#350107 = FACE_BOUND('',#350108,.T.); +#350108 = EDGE_LOOP('',(#350109,#350110,#350111,#350112,#350113,#350114, + #350115,#350116)); +#350109 = ORIENTED_EDGE('',*,*,#349848,.T.); +#350110 = ORIENTED_EDGE('',*,*,#349881,.T.); +#350111 = ORIENTED_EDGE('',*,*,#349912,.T.); +#350112 = ORIENTED_EDGE('',*,*,#349945,.T.); +#350113 = ORIENTED_EDGE('',*,*,#349976,.T.); +#350114 = ORIENTED_EDGE('',*,*,#350009,.T.); +#350115 = ORIENTED_EDGE('',*,*,#350040,.T.); +#350116 = ORIENTED_EDGE('',*,*,#350073,.T.); +#350117 = PLANE('',#350118); +#350118 = AXIS2_PLACEMENT_3D('',#350119,#350120,#350121); +#350119 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#350120 = DIRECTION('',(-0.,-0.,-1.)); +#350121 = DIRECTION('',(-1.,0.,0.)); +#350122 = MANIFOLD_SOLID_BREP('',#350123); +#350123 = CLOSED_SHELL('',(#350124,#350164,#350195,#350226,#350248, + #350260)); +#350124 = ADVANCED_FACE('',(#350125),#350159,.T.); +#350125 = FACE_BOUND('',#350126,.T.); +#350126 = EDGE_LOOP('',(#350127,#350137,#350145,#350153)); +#350127 = ORIENTED_EDGE('',*,*,#350128,.T.); +#350128 = EDGE_CURVE('',#350129,#350131,#350133,.T.); +#350129 = VERTEX_POINT('',#350130); +#350130 = CARTESIAN_POINT('',(146.,-68.91,1.51)); +#350131 = VERTEX_POINT('',#350132); +#350132 = CARTESIAN_POINT('',(146.,-68.91,1.55)); +#350133 = LINE('',#350134,#350135); +#350134 = CARTESIAN_POINT('',(146.,-68.91,1.51)); +#350135 = VECTOR('',#350136,1.); +#350136 = DIRECTION('',(0.,0.,1.)); +#350137 = ORIENTED_EDGE('',*,*,#350138,.T.); +#350138 = EDGE_CURVE('',#350131,#350139,#350141,.T.); +#350139 = VERTEX_POINT('',#350140); +#350140 = CARTESIAN_POINT('',(146.,-68.01,1.55)); +#350141 = LINE('',#350142,#350143); +#350142 = CARTESIAN_POINT('',(146.,-68.91,1.55)); +#350143 = VECTOR('',#350144,1.); +#350144 = DIRECTION('',(0.,1.,0.)); +#350145 = ORIENTED_EDGE('',*,*,#350146,.F.); +#350146 = EDGE_CURVE('',#350147,#350139,#350149,.T.); +#350147 = VERTEX_POINT('',#350148); +#350148 = CARTESIAN_POINT('',(146.,-68.01,1.51)); +#350149 = LINE('',#350150,#350151); +#350150 = CARTESIAN_POINT('',(146.,-68.01,1.51)); +#350151 = VECTOR('',#350152,1.); +#350152 = DIRECTION('',(0.,0.,1.)); +#350153 = ORIENTED_EDGE('',*,*,#350154,.F.); +#350154 = EDGE_CURVE('',#350129,#350147,#350155,.T.); +#350155 = LINE('',#350156,#350157); +#350156 = CARTESIAN_POINT('',(146.,-68.91,1.51)); +#350157 = VECTOR('',#350158,1.); +#350158 = DIRECTION('',(0.,1.,0.)); +#350159 = PLANE('',#350160); +#350160 = AXIS2_PLACEMENT_3D('',#350161,#350162,#350163); +#350161 = CARTESIAN_POINT('',(146.,-68.91,1.51)); +#350162 = DIRECTION('',(-1.,0.,0.)); +#350163 = DIRECTION('',(0.,1.,0.)); +#350164 = ADVANCED_FACE('',(#350165),#350190,.T.); +#350165 = FACE_BOUND('',#350166,.T.); +#350166 = EDGE_LOOP('',(#350167,#350168,#350176,#350184)); +#350167 = ORIENTED_EDGE('',*,*,#350146,.T.); +#350168 = ORIENTED_EDGE('',*,*,#350169,.T.); +#350169 = EDGE_CURVE('',#350139,#350170,#350172,.T.); +#350170 = VERTEX_POINT('',#350171); +#350171 = CARTESIAN_POINT('',(147.5,-68.01,1.55)); +#350172 = LINE('',#350173,#350174); +#350173 = CARTESIAN_POINT('',(146.,-68.01,1.55)); +#350174 = VECTOR('',#350175,1.); +#350175 = DIRECTION('',(1.,0.,0.)); +#350176 = ORIENTED_EDGE('',*,*,#350177,.F.); +#350177 = EDGE_CURVE('',#350178,#350170,#350180,.T.); +#350178 = VERTEX_POINT('',#350179); +#350179 = CARTESIAN_POINT('',(147.5,-68.01,1.51)); +#350180 = LINE('',#350181,#350182); +#350181 = CARTESIAN_POINT('',(147.5,-68.01,1.51)); +#350182 = VECTOR('',#350183,1.); +#350183 = DIRECTION('',(0.,0.,1.)); +#350184 = ORIENTED_EDGE('',*,*,#350185,.F.); +#350185 = EDGE_CURVE('',#350147,#350178,#350186,.T.); +#350186 = LINE('',#350187,#350188); +#350187 = CARTESIAN_POINT('',(146.,-68.01,1.51)); +#350188 = VECTOR('',#350189,1.); +#350189 = DIRECTION('',(1.,0.,0.)); +#350190 = PLANE('',#350191); +#350191 = AXIS2_PLACEMENT_3D('',#350192,#350193,#350194); +#350192 = CARTESIAN_POINT('',(146.,-68.01,1.51)); +#350193 = DIRECTION('',(0.,1.,0.)); +#350194 = DIRECTION('',(1.,0.,0.)); +#350195 = ADVANCED_FACE('',(#350196),#350221,.T.); +#350196 = FACE_BOUND('',#350197,.T.); +#350197 = EDGE_LOOP('',(#350198,#350199,#350207,#350215)); +#350198 = ORIENTED_EDGE('',*,*,#350177,.T.); +#350199 = ORIENTED_EDGE('',*,*,#350200,.T.); +#350200 = EDGE_CURVE('',#350170,#350201,#350203,.T.); +#350201 = VERTEX_POINT('',#350202); +#350202 = CARTESIAN_POINT('',(147.5,-68.91,1.55)); +#350203 = LINE('',#350204,#350205); +#350204 = CARTESIAN_POINT('',(147.5,-68.01,1.55)); +#350205 = VECTOR('',#350206,1.); +#350206 = DIRECTION('',(0.,-1.,0.)); +#350207 = ORIENTED_EDGE('',*,*,#350208,.F.); +#350208 = EDGE_CURVE('',#350209,#350201,#350211,.T.); +#350209 = VERTEX_POINT('',#350210); +#350210 = CARTESIAN_POINT('',(147.5,-68.91,1.51)); +#350211 = LINE('',#350212,#350213); +#350212 = CARTESIAN_POINT('',(147.5,-68.91,1.51)); +#350213 = VECTOR('',#350214,1.); +#350214 = DIRECTION('',(0.,0.,1.)); +#350215 = ORIENTED_EDGE('',*,*,#350216,.F.); +#350216 = EDGE_CURVE('',#350178,#350209,#350217,.T.); +#350217 = LINE('',#350218,#350219); +#350218 = CARTESIAN_POINT('',(147.5,-68.01,1.51)); +#350219 = VECTOR('',#350220,1.); +#350220 = DIRECTION('',(0.,-1.,0.)); +#350221 = PLANE('',#350222); +#350222 = AXIS2_PLACEMENT_3D('',#350223,#350224,#350225); +#350223 = CARTESIAN_POINT('',(147.5,-68.01,1.51)); +#350224 = DIRECTION('',(1.,0.,-0.)); +#350225 = DIRECTION('',(0.,-1.,0.)); +#350226 = ADVANCED_FACE('',(#350227),#350243,.T.); +#350227 = FACE_BOUND('',#350228,.T.); +#350228 = EDGE_LOOP('',(#350229,#350230,#350236,#350237)); +#350229 = ORIENTED_EDGE('',*,*,#350208,.T.); +#350230 = ORIENTED_EDGE('',*,*,#350231,.T.); +#350231 = EDGE_CURVE('',#350201,#350131,#350232,.T.); +#350232 = LINE('',#350233,#350234); +#350233 = CARTESIAN_POINT('',(147.5,-68.91,1.55)); +#350234 = VECTOR('',#350235,1.); +#350235 = DIRECTION('',(-1.,0.,0.)); +#350236 = ORIENTED_EDGE('',*,*,#350128,.F.); +#350237 = ORIENTED_EDGE('',*,*,#350238,.F.); +#350238 = EDGE_CURVE('',#350209,#350129,#350239,.T.); +#350239 = LINE('',#350240,#350241); +#350240 = CARTESIAN_POINT('',(147.5,-68.91,1.51)); +#350241 = VECTOR('',#350242,1.); +#350242 = DIRECTION('',(-1.,0.,0.)); +#350243 = PLANE('',#350244); +#350244 = AXIS2_PLACEMENT_3D('',#350245,#350246,#350247); +#350245 = CARTESIAN_POINT('',(147.5,-68.91,1.51)); +#350246 = DIRECTION('',(0.,-1.,0.)); +#350247 = DIRECTION('',(-1.,0.,0.)); +#350248 = ADVANCED_FACE('',(#350249),#350255,.F.); +#350249 = FACE_BOUND('',#350250,.T.); +#350250 = EDGE_LOOP('',(#350251,#350252,#350253,#350254)); +#350251 = ORIENTED_EDGE('',*,*,#350154,.T.); +#350252 = ORIENTED_EDGE('',*,*,#350185,.T.); +#350253 = ORIENTED_EDGE('',*,*,#350216,.T.); +#350254 = ORIENTED_EDGE('',*,*,#350238,.T.); +#350255 = PLANE('',#350256); +#350256 = AXIS2_PLACEMENT_3D('',#350257,#350258,#350259); +#350257 = CARTESIAN_POINT('',(0.,0.,1.51)); +#350258 = DIRECTION('',(0.,0.,1.)); +#350259 = DIRECTION('',(1.,0.,-0.)); +#350260 = ADVANCED_FACE('',(#350261),#350267,.T.); +#350261 = FACE_BOUND('',#350262,.F.); +#350262 = EDGE_LOOP('',(#350263,#350264,#350265,#350266)); +#350263 = ORIENTED_EDGE('',*,*,#350138,.T.); +#350264 = ORIENTED_EDGE('',*,*,#350169,.T.); +#350265 = ORIENTED_EDGE('',*,*,#350200,.T.); +#350266 = ORIENTED_EDGE('',*,*,#350231,.T.); +#350267 = PLANE('',#350268); +#350268 = AXIS2_PLACEMENT_3D('',#350269,#350270,#350271); +#350269 = CARTESIAN_POINT('',(0.,0.,1.55)); +#350270 = DIRECTION('',(0.,0.,1.)); +#350271 = DIRECTION('',(1.,0.,-0.)); +#350272 = MANIFOLD_SOLID_BREP('',#350273); +#350273 = CLOSED_SHELL('',(#350274,#350316,#350347,#350380,#350411, + #350444,#350475,#350508,#350530,#350546)); +#350274 = ADVANCED_FACE('',(#350275),#350311,.T.); +#350275 = FACE_BOUND('',#350276,.T.); +#350276 = EDGE_LOOP('',(#350277,#350287,#350296,#350304)); +#350277 = ORIENTED_EDGE('',*,*,#350278,.T.); +#350278 = EDGE_CURVE('',#350279,#350281,#350283,.T.); +#350279 = VERTEX_POINT('',#350280); +#350280 = CARTESIAN_POINT('',(147.93,-152.105,1.51)); +#350281 = VERTEX_POINT('',#350282); +#350282 = CARTESIAN_POINT('',(147.93,-152.105,1.55)); +#350283 = LINE('',#350284,#350285); +#350284 = CARTESIAN_POINT('',(147.93,-152.105,1.51)); +#350285 = VECTOR('',#350286,1.); +#350286 = DIRECTION('',(0.,0.,1.)); +#350287 = ORIENTED_EDGE('',*,*,#350288,.T.); +#350288 = EDGE_CURVE('',#350281,#350289,#350291,.T.); +#350289 = VERTEX_POINT('',#350290); +#350290 = CARTESIAN_POINT('',(148.065,-151.97,1.55)); +#350291 = CIRCLE('',#350292,0.135001418495); +#350292 = AXIS2_PLACEMENT_3D('',#350293,#350294,#350295); +#350293 = CARTESIAN_POINT('',(148.06500141848,-152.1050014184,1.55)); +#350294 = DIRECTION('',(0.,0.,-1.)); +#350295 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#350296 = ORIENTED_EDGE('',*,*,#350297,.F.); +#350297 = EDGE_CURVE('',#350298,#350289,#350300,.T.); +#350298 = VERTEX_POINT('',#350299); +#350299 = CARTESIAN_POINT('',(148.065,-151.97,1.51)); +#350300 = LINE('',#350301,#350302); +#350301 = CARTESIAN_POINT('',(148.065,-151.97,1.51)); +#350302 = VECTOR('',#350303,1.); +#350303 = DIRECTION('',(0.,0.,1.)); +#350304 = ORIENTED_EDGE('',*,*,#350305,.F.); +#350305 = EDGE_CURVE('',#350279,#350298,#350306,.T.); +#350306 = CIRCLE('',#350307,0.135001418495); +#350307 = AXIS2_PLACEMENT_3D('',#350308,#350309,#350310); +#350308 = CARTESIAN_POINT('',(148.06500141848,-152.1050014184,1.51)); +#350309 = DIRECTION('',(0.,0.,-1.)); +#350310 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#350311 = CYLINDRICAL_SURFACE('',#350312,0.135001418495); +#350312 = AXIS2_PLACEMENT_3D('',#350313,#350314,#350315); +#350313 = CARTESIAN_POINT('',(148.06500141848,-152.1050014184,1.51)); +#350314 = DIRECTION('',(0.,0.,-1.)); +#350315 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#350316 = ADVANCED_FACE('',(#350317),#350342,.T.); +#350317 = FACE_BOUND('',#350318,.T.); +#350318 = EDGE_LOOP('',(#350319,#350320,#350328,#350336)); +#350319 = ORIENTED_EDGE('',*,*,#350297,.T.); +#350320 = ORIENTED_EDGE('',*,*,#350321,.T.); +#350321 = EDGE_CURVE('',#350289,#350322,#350324,.T.); +#350322 = VERTEX_POINT('',#350323); +#350323 = CARTESIAN_POINT('',(148.435,-151.97,1.55)); +#350324 = LINE('',#350325,#350326); +#350325 = CARTESIAN_POINT('',(148.065,-151.97,1.55)); +#350326 = VECTOR('',#350327,1.); +#350327 = DIRECTION('',(1.,0.,0.)); +#350328 = ORIENTED_EDGE('',*,*,#350329,.F.); +#350329 = EDGE_CURVE('',#350330,#350322,#350332,.T.); +#350330 = VERTEX_POINT('',#350331); +#350331 = CARTESIAN_POINT('',(148.435,-151.97,1.51)); +#350332 = LINE('',#350333,#350334); +#350333 = CARTESIAN_POINT('',(148.435,-151.97,1.51)); +#350334 = VECTOR('',#350335,1.); +#350335 = DIRECTION('',(0.,0.,1.)); +#350336 = ORIENTED_EDGE('',*,*,#350337,.F.); +#350337 = EDGE_CURVE('',#350298,#350330,#350338,.T.); +#350338 = LINE('',#350339,#350340); +#350339 = CARTESIAN_POINT('',(148.065,-151.97,1.51)); +#350340 = VECTOR('',#350341,1.); +#350341 = DIRECTION('',(1.,0.,0.)); +#350342 = PLANE('',#350343); +#350343 = AXIS2_PLACEMENT_3D('',#350344,#350345,#350346); +#350344 = CARTESIAN_POINT('',(148.065,-151.97,1.51)); +#350345 = DIRECTION('',(0.,1.,0.)); +#350346 = DIRECTION('',(1.,0.,0.)); +#350347 = ADVANCED_FACE('',(#350348),#350375,.T.); +#350348 = FACE_BOUND('',#350349,.T.); +#350349 = EDGE_LOOP('',(#350350,#350351,#350360,#350368)); +#350350 = ORIENTED_EDGE('',*,*,#350329,.T.); +#350351 = ORIENTED_EDGE('',*,*,#350352,.T.); +#350352 = EDGE_CURVE('',#350322,#350353,#350355,.T.); +#350353 = VERTEX_POINT('',#350354); +#350354 = CARTESIAN_POINT('',(148.57,-152.105,1.55)); +#350355 = CIRCLE('',#350356,0.135001418495); +#350356 = AXIS2_PLACEMENT_3D('',#350357,#350358,#350359); +#350357 = CARTESIAN_POINT('',(148.43499858151,-152.1050014184,1.55)); +#350358 = DIRECTION('',(0.,0.,-1.)); +#350359 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#350360 = ORIENTED_EDGE('',*,*,#350361,.F.); +#350361 = EDGE_CURVE('',#350362,#350353,#350364,.T.); +#350362 = VERTEX_POINT('',#350363); +#350363 = CARTESIAN_POINT('',(148.57,-152.105,1.51)); +#350364 = LINE('',#350365,#350366); +#350365 = CARTESIAN_POINT('',(148.57,-152.105,1.51)); +#350366 = VECTOR('',#350367,1.); +#350367 = DIRECTION('',(0.,0.,1.)); +#350368 = ORIENTED_EDGE('',*,*,#350369,.F.); +#350369 = EDGE_CURVE('',#350330,#350362,#350370,.T.); +#350370 = CIRCLE('',#350371,0.135001418495); +#350371 = AXIS2_PLACEMENT_3D('',#350372,#350373,#350374); +#350372 = CARTESIAN_POINT('',(148.43499858151,-152.1050014184,1.51)); +#350373 = DIRECTION('',(0.,0.,-1.)); +#350374 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#350375 = CYLINDRICAL_SURFACE('',#350376,0.135001418495); +#350376 = AXIS2_PLACEMENT_3D('',#350377,#350378,#350379); +#350377 = CARTESIAN_POINT('',(148.43499858151,-152.1050014184,1.51)); +#350378 = DIRECTION('',(0.,0.,-1.)); +#350379 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#350380 = ADVANCED_FACE('',(#350381),#350406,.T.); +#350381 = FACE_BOUND('',#350382,.T.); +#350382 = EDGE_LOOP('',(#350383,#350384,#350392,#350400)); +#350383 = ORIENTED_EDGE('',*,*,#350361,.T.); +#350384 = ORIENTED_EDGE('',*,*,#350385,.T.); +#350385 = EDGE_CURVE('',#350353,#350386,#350388,.T.); +#350386 = VERTEX_POINT('',#350387); +#350387 = CARTESIAN_POINT('',(148.57,-152.375,1.55)); +#350388 = LINE('',#350389,#350390); +#350389 = CARTESIAN_POINT('',(148.57,-152.105,1.55)); +#350390 = VECTOR('',#350391,1.); +#350391 = DIRECTION('',(0.,-1.,0.)); +#350392 = ORIENTED_EDGE('',*,*,#350393,.F.); +#350393 = EDGE_CURVE('',#350394,#350386,#350396,.T.); +#350394 = VERTEX_POINT('',#350395); +#350395 = CARTESIAN_POINT('',(148.57,-152.375,1.51)); +#350396 = LINE('',#350397,#350398); +#350397 = CARTESIAN_POINT('',(148.57,-152.375,1.51)); +#350398 = VECTOR('',#350399,1.); +#350399 = DIRECTION('',(0.,0.,1.)); +#350400 = ORIENTED_EDGE('',*,*,#350401,.F.); +#350401 = EDGE_CURVE('',#350362,#350394,#350402,.T.); +#350402 = LINE('',#350403,#350404); +#350403 = CARTESIAN_POINT('',(148.57,-152.105,1.51)); +#350404 = VECTOR('',#350405,1.); +#350405 = DIRECTION('',(0.,-1.,0.)); +#350406 = PLANE('',#350407); +#350407 = AXIS2_PLACEMENT_3D('',#350408,#350409,#350410); +#350408 = CARTESIAN_POINT('',(148.57,-152.105,1.51)); +#350409 = DIRECTION('',(1.,0.,-0.)); +#350410 = DIRECTION('',(0.,-1.,0.)); +#350411 = ADVANCED_FACE('',(#350412),#350439,.T.); +#350412 = FACE_BOUND('',#350413,.T.); +#350413 = EDGE_LOOP('',(#350414,#350415,#350424,#350432)); +#350414 = ORIENTED_EDGE('',*,*,#350393,.T.); +#350415 = ORIENTED_EDGE('',*,*,#350416,.T.); +#350416 = EDGE_CURVE('',#350386,#350417,#350419,.T.); +#350417 = VERTEX_POINT('',#350418); +#350418 = CARTESIAN_POINT('',(148.435,-152.51,1.55)); +#350419 = CIRCLE('',#350420,0.135001418495); +#350420 = AXIS2_PLACEMENT_3D('',#350421,#350422,#350423); +#350421 = CARTESIAN_POINT('',(148.43499858151,-152.3749985815,1.55)); +#350422 = DIRECTION('',(0.,0.,-1.)); +#350423 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#350424 = ORIENTED_EDGE('',*,*,#350425,.F.); +#350425 = EDGE_CURVE('',#350426,#350417,#350428,.T.); +#350426 = VERTEX_POINT('',#350427); +#350427 = CARTESIAN_POINT('',(148.435,-152.51,1.51)); +#350428 = LINE('',#350429,#350430); +#350429 = CARTESIAN_POINT('',(148.435,-152.51,1.51)); +#350430 = VECTOR('',#350431,1.); +#350431 = DIRECTION('',(0.,0.,1.)); +#350432 = ORIENTED_EDGE('',*,*,#350433,.F.); +#350433 = EDGE_CURVE('',#350394,#350426,#350434,.T.); +#350434 = CIRCLE('',#350435,0.135001418495); +#350435 = AXIS2_PLACEMENT_3D('',#350436,#350437,#350438); +#350436 = CARTESIAN_POINT('',(148.43499858151,-152.3749985815,1.51)); +#350437 = DIRECTION('',(0.,0.,-1.)); +#350438 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#350439 = CYLINDRICAL_SURFACE('',#350440,0.135001418495); +#350440 = AXIS2_PLACEMENT_3D('',#350441,#350442,#350443); +#350441 = CARTESIAN_POINT('',(148.43499858151,-152.3749985815,1.51)); +#350442 = DIRECTION('',(0.,0.,-1.)); +#350443 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#350444 = ADVANCED_FACE('',(#350445),#350470,.T.); +#350445 = FACE_BOUND('',#350446,.T.); +#350446 = EDGE_LOOP('',(#350447,#350448,#350456,#350464)); +#350447 = ORIENTED_EDGE('',*,*,#350425,.T.); +#350448 = ORIENTED_EDGE('',*,*,#350449,.T.); +#350449 = EDGE_CURVE('',#350417,#350450,#350452,.T.); +#350450 = VERTEX_POINT('',#350451); +#350451 = CARTESIAN_POINT('',(148.065,-152.51,1.55)); +#350452 = LINE('',#350453,#350454); +#350453 = CARTESIAN_POINT('',(148.435,-152.51,1.55)); +#350454 = VECTOR('',#350455,1.); +#350455 = DIRECTION('',(-1.,0.,0.)); +#350456 = ORIENTED_EDGE('',*,*,#350457,.F.); +#350457 = EDGE_CURVE('',#350458,#350450,#350460,.T.); +#350458 = VERTEX_POINT('',#350459); +#350459 = CARTESIAN_POINT('',(148.065,-152.51,1.51)); +#350460 = LINE('',#350461,#350462); +#350461 = CARTESIAN_POINT('',(148.065,-152.51,1.51)); +#350462 = VECTOR('',#350463,1.); +#350463 = DIRECTION('',(0.,0.,1.)); +#350464 = ORIENTED_EDGE('',*,*,#350465,.F.); +#350465 = EDGE_CURVE('',#350426,#350458,#350466,.T.); +#350466 = LINE('',#350467,#350468); +#350467 = CARTESIAN_POINT('',(148.435,-152.51,1.51)); +#350468 = VECTOR('',#350469,1.); +#350469 = DIRECTION('',(-1.,0.,0.)); +#350470 = PLANE('',#350471); +#350471 = AXIS2_PLACEMENT_3D('',#350472,#350473,#350474); +#350472 = CARTESIAN_POINT('',(148.435,-152.51,1.51)); +#350473 = DIRECTION('',(0.,-1.,0.)); +#350474 = DIRECTION('',(-1.,0.,0.)); +#350475 = ADVANCED_FACE('',(#350476),#350503,.T.); +#350476 = FACE_BOUND('',#350477,.T.); +#350477 = EDGE_LOOP('',(#350478,#350479,#350488,#350496)); +#350478 = ORIENTED_EDGE('',*,*,#350457,.T.); +#350479 = ORIENTED_EDGE('',*,*,#350480,.T.); +#350480 = EDGE_CURVE('',#350450,#350481,#350483,.T.); +#350481 = VERTEX_POINT('',#350482); +#350482 = CARTESIAN_POINT('',(147.93,-152.375,1.55)); +#350483 = CIRCLE('',#350484,0.135001418495); +#350484 = AXIS2_PLACEMENT_3D('',#350485,#350486,#350487); +#350485 = CARTESIAN_POINT('',(148.06500141848,-152.3749985815,1.55)); +#350486 = DIRECTION('',(0.,0.,-1.)); +#350487 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#350488 = ORIENTED_EDGE('',*,*,#350489,.F.); +#350489 = EDGE_CURVE('',#350490,#350481,#350492,.T.); +#350490 = VERTEX_POINT('',#350491); +#350491 = CARTESIAN_POINT('',(147.93,-152.375,1.51)); +#350492 = LINE('',#350493,#350494); +#350493 = CARTESIAN_POINT('',(147.93,-152.375,1.51)); +#350494 = VECTOR('',#350495,1.); +#350495 = DIRECTION('',(0.,0.,1.)); +#350496 = ORIENTED_EDGE('',*,*,#350497,.F.); +#350497 = EDGE_CURVE('',#350458,#350490,#350498,.T.); +#350498 = CIRCLE('',#350499,0.135001418495); +#350499 = AXIS2_PLACEMENT_3D('',#350500,#350501,#350502); +#350500 = CARTESIAN_POINT('',(148.06500141848,-152.3749985815,1.51)); +#350501 = DIRECTION('',(0.,0.,-1.)); +#350502 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#350503 = CYLINDRICAL_SURFACE('',#350504,0.135001418495); +#350504 = AXIS2_PLACEMENT_3D('',#350505,#350506,#350507); +#350505 = CARTESIAN_POINT('',(148.06500141848,-152.3749985815,1.51)); +#350506 = DIRECTION('',(0.,0.,-1.)); +#350507 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#350508 = ADVANCED_FACE('',(#350509),#350525,.T.); +#350509 = FACE_BOUND('',#350510,.T.); +#350510 = EDGE_LOOP('',(#350511,#350512,#350518,#350519)); +#350511 = ORIENTED_EDGE('',*,*,#350489,.T.); +#350512 = ORIENTED_EDGE('',*,*,#350513,.T.); +#350513 = EDGE_CURVE('',#350481,#350281,#350514,.T.); +#350514 = LINE('',#350515,#350516); +#350515 = CARTESIAN_POINT('',(147.93,-152.375,1.55)); +#350516 = VECTOR('',#350517,1.); +#350517 = DIRECTION('',(0.,1.,0.)); +#350518 = ORIENTED_EDGE('',*,*,#350278,.F.); +#350519 = ORIENTED_EDGE('',*,*,#350520,.F.); +#350520 = EDGE_CURVE('',#350490,#350279,#350521,.T.); +#350521 = LINE('',#350522,#350523); +#350522 = CARTESIAN_POINT('',(147.93,-152.375,1.51)); +#350523 = VECTOR('',#350524,1.); +#350524 = DIRECTION('',(0.,1.,0.)); +#350525 = PLANE('',#350526); +#350526 = AXIS2_PLACEMENT_3D('',#350527,#350528,#350529); +#350527 = CARTESIAN_POINT('',(147.93,-152.375,1.51)); +#350528 = DIRECTION('',(-1.,0.,0.)); +#350529 = DIRECTION('',(0.,1.,0.)); +#350530 = ADVANCED_FACE('',(#350531),#350541,.F.); +#350531 = FACE_BOUND('',#350532,.T.); +#350532 = EDGE_LOOP('',(#350533,#350534,#350535,#350536,#350537,#350538, + #350539,#350540)); +#350533 = ORIENTED_EDGE('',*,*,#350305,.T.); +#350534 = ORIENTED_EDGE('',*,*,#350337,.T.); +#350535 = ORIENTED_EDGE('',*,*,#350369,.T.); +#350536 = ORIENTED_EDGE('',*,*,#350401,.T.); +#350537 = ORIENTED_EDGE('',*,*,#350433,.T.); +#350538 = ORIENTED_EDGE('',*,*,#350465,.T.); +#350539 = ORIENTED_EDGE('',*,*,#350497,.T.); +#350540 = ORIENTED_EDGE('',*,*,#350520,.T.); +#350541 = PLANE('',#350542); +#350542 = AXIS2_PLACEMENT_3D('',#350543,#350544,#350545); +#350543 = CARTESIAN_POINT('',(0.,0.,1.51)); +#350544 = DIRECTION('',(0.,0.,1.)); +#350545 = DIRECTION('',(1.,0.,-0.)); +#350546 = ADVANCED_FACE('',(#350547),#350557,.T.); +#350547 = FACE_BOUND('',#350548,.F.); +#350548 = EDGE_LOOP('',(#350549,#350550,#350551,#350552,#350553,#350554, + #350555,#350556)); +#350549 = ORIENTED_EDGE('',*,*,#350288,.T.); +#350550 = ORIENTED_EDGE('',*,*,#350321,.T.); +#350551 = ORIENTED_EDGE('',*,*,#350352,.T.); +#350552 = ORIENTED_EDGE('',*,*,#350385,.T.); +#350553 = ORIENTED_EDGE('',*,*,#350416,.T.); +#350554 = ORIENTED_EDGE('',*,*,#350449,.T.); +#350555 = ORIENTED_EDGE('',*,*,#350480,.T.); +#350556 = ORIENTED_EDGE('',*,*,#350513,.T.); +#350557 = PLANE('',#350558); +#350558 = AXIS2_PLACEMENT_3D('',#350559,#350560,#350561); +#350559 = CARTESIAN_POINT('',(0.,0.,1.55)); +#350560 = DIRECTION('',(0.,0.,1.)); +#350561 = DIRECTION('',(1.,0.,-0.)); +#350562 = MANIFOLD_SOLID_BREP('',#350563); +#350563 = CLOSED_SHELL('',(#350564,#350597,#350617,#350637)); +#350564 = ADVANCED_FACE('',(#350565),#350592,.T.); +#350565 = FACE_BOUND('',#350566,.F.); +#350566 = EDGE_LOOP('',(#350567,#350577,#350584,#350585)); +#350567 = ORIENTED_EDGE('',*,*,#350568,.T.); +#350568 = EDGE_CURVE('',#350569,#350571,#350573,.T.); +#350569 = VERTEX_POINT('',#350570); +#350570 = CARTESIAN_POINT('',(136.7155,-127.5,1.51)); +#350571 = VERTEX_POINT('',#350572); +#350572 = CARTESIAN_POINT('',(136.7155,-127.5,1.55)); +#350573 = LINE('',#350574,#350575); +#350574 = CARTESIAN_POINT('',(136.7155,-127.5,1.51)); +#350575 = VECTOR('',#350576,1.); +#350576 = DIRECTION('',(0.,0.,1.)); +#350577 = ORIENTED_EDGE('',*,*,#350578,.T.); +#350578 = EDGE_CURVE('',#350571,#350571,#350579,.T.); +#350579 = CIRCLE('',#350580,0.7155); +#350580 = AXIS2_PLACEMENT_3D('',#350581,#350582,#350583); +#350581 = CARTESIAN_POINT('',(136.,-127.5,1.55)); +#350582 = DIRECTION('',(0.,0.,1.)); +#350583 = DIRECTION('',(1.,0.,-0.)); +#350584 = ORIENTED_EDGE('',*,*,#350568,.F.); +#350585 = ORIENTED_EDGE('',*,*,#350586,.F.); +#350586 = EDGE_CURVE('',#350569,#350569,#350587,.T.); +#350587 = CIRCLE('',#350588,0.7155); +#350588 = AXIS2_PLACEMENT_3D('',#350589,#350590,#350591); +#350589 = CARTESIAN_POINT('',(136.,-127.5,1.51)); +#350590 = DIRECTION('',(0.,0.,1.)); +#350591 = DIRECTION('',(1.,0.,-0.)); +#350592 = CYLINDRICAL_SURFACE('',#350593,0.7155); +#350593 = AXIS2_PLACEMENT_3D('',#350594,#350595,#350596); +#350594 = CARTESIAN_POINT('',(136.,-127.5,1.51)); +#350595 = DIRECTION('',(-0.,-0.,-1.)); +#350596 = DIRECTION('',(1.,0.,-0.)); +#350597 = ADVANCED_FACE('',(#350598,#350601),#350612,.F.); +#350598 = FACE_BOUND('',#350599,.F.); +#350599 = EDGE_LOOP('',(#350600)); +#350600 = ORIENTED_EDGE('',*,*,#350586,.T.); +#350601 = FACE_BOUND('',#350602,.F.); +#350602 = EDGE_LOOP('',(#350603)); +#350603 = ORIENTED_EDGE('',*,*,#350604,.T.); +#350604 = EDGE_CURVE('',#350605,#350605,#350607,.T.); +#350605 = VERTEX_POINT('',#350606); +#350606 = CARTESIAN_POINT('',(136.,-127.935,1.51)); +#350607 = CIRCLE('',#350608,0.435); +#350608 = AXIS2_PLACEMENT_3D('',#350609,#350610,#350611); +#350609 = CARTESIAN_POINT('',(136.,-127.5,1.51)); +#350610 = DIRECTION('',(-0.,0.,-1.)); +#350611 = DIRECTION('',(-0.,-1.,0.)); +#350612 = PLANE('',#350613); +#350613 = AXIS2_PLACEMENT_3D('',#350614,#350615,#350616); +#350614 = CARTESIAN_POINT('',(0.,0.,1.51)); +#350615 = DIRECTION('',(0.,0.,1.)); +#350616 = DIRECTION('',(1.,0.,-0.)); +#350617 = ADVANCED_FACE('',(#350618,#350621),#350632,.T.); +#350618 = FACE_BOUND('',#350619,.T.); +#350619 = EDGE_LOOP('',(#350620)); +#350620 = ORIENTED_EDGE('',*,*,#350578,.T.); +#350621 = FACE_BOUND('',#350622,.T.); +#350622 = EDGE_LOOP('',(#350623)); +#350623 = ORIENTED_EDGE('',*,*,#350624,.T.); +#350624 = EDGE_CURVE('',#350625,#350625,#350627,.T.); +#350625 = VERTEX_POINT('',#350626); +#350626 = CARTESIAN_POINT('',(136.,-127.935,1.55)); +#350627 = CIRCLE('',#350628,0.435); +#350628 = AXIS2_PLACEMENT_3D('',#350629,#350630,#350631); +#350629 = CARTESIAN_POINT('',(136.,-127.5,1.55)); +#350630 = DIRECTION('',(-0.,0.,-1.)); +#350631 = DIRECTION('',(-0.,-1.,0.)); +#350632 = PLANE('',#350633); +#350633 = AXIS2_PLACEMENT_3D('',#350634,#350635,#350636); +#350634 = CARTESIAN_POINT('',(0.,0.,1.55)); +#350635 = DIRECTION('',(0.,0.,1.)); +#350636 = DIRECTION('',(1.,0.,-0.)); +#350637 = ADVANCED_FACE('',(#350638),#350649,.F.); +#350638 = FACE_BOUND('',#350639,.T.); +#350639 = EDGE_LOOP('',(#350640,#350641,#350647,#350648)); +#350640 = ORIENTED_EDGE('',*,*,#350604,.T.); +#350641 = ORIENTED_EDGE('',*,*,#350642,.T.); +#350642 = EDGE_CURVE('',#350605,#350625,#350643,.T.); +#350643 = LINE('',#350644,#350645); +#350644 = CARTESIAN_POINT('',(136.,-127.935,-4.6E-02)); +#350645 = VECTOR('',#350646,1.); +#350646 = DIRECTION('',(0.,0.,1.)); +#350647 = ORIENTED_EDGE('',*,*,#350624,.F.); +#350648 = ORIENTED_EDGE('',*,*,#350642,.F.); +#350649 = CYLINDRICAL_SURFACE('',#350650,0.435); +#350650 = AXIS2_PLACEMENT_3D('',#350651,#350652,#350653); +#350651 = CARTESIAN_POINT('',(136.,-127.5,-4.6E-02)); +#350652 = DIRECTION('',(-0.,-0.,-1.)); +#350653 = DIRECTION('',(-0.,-1.,0.)); +#350654 = MANIFOLD_SOLID_BREP('',#350655); +#350655 = CLOSED_SHELL('',(#350656,#350689,#350709,#350729)); +#350656 = ADVANCED_FACE('',(#350657),#350684,.T.); +#350657 = FACE_BOUND('',#350658,.T.); +#350658 = EDGE_LOOP('',(#350659,#350669,#350676,#350677)); +#350659 = ORIENTED_EDGE('',*,*,#350660,.T.); +#350660 = EDGE_CURVE('',#350661,#350663,#350665,.T.); +#350661 = VERTEX_POINT('',#350662); +#350662 = CARTESIAN_POINT('',(136.7155,-127.5,0.)); +#350663 = VERTEX_POINT('',#350664); +#350664 = CARTESIAN_POINT('',(136.7155,-127.5,-4.E-02)); +#350665 = LINE('',#350666,#350667); +#350666 = CARTESIAN_POINT('',(136.7155,-127.5,0.)); +#350667 = VECTOR('',#350668,1.); +#350668 = DIRECTION('',(0.,0.,-1.)); +#350669 = ORIENTED_EDGE('',*,*,#350670,.T.); +#350670 = EDGE_CURVE('',#350663,#350663,#350671,.T.); +#350671 = CIRCLE('',#350672,0.7155); +#350672 = AXIS2_PLACEMENT_3D('',#350673,#350674,#350675); +#350673 = CARTESIAN_POINT('',(136.,-127.5,-4.E-02)); +#350674 = DIRECTION('',(0.,0.,1.)); +#350675 = DIRECTION('',(1.,0.,-0.)); +#350676 = ORIENTED_EDGE('',*,*,#350660,.F.); +#350677 = ORIENTED_EDGE('',*,*,#350678,.F.); +#350678 = EDGE_CURVE('',#350661,#350661,#350679,.T.); +#350679 = CIRCLE('',#350680,0.7155); +#350680 = AXIS2_PLACEMENT_3D('',#350681,#350682,#350683); +#350681 = CARTESIAN_POINT('',(136.,-127.5,0.)); +#350682 = DIRECTION('',(0.,0.,1.)); +#350683 = DIRECTION('',(1.,0.,-0.)); +#350684 = CYLINDRICAL_SURFACE('',#350685,0.7155); +#350685 = AXIS2_PLACEMENT_3D('',#350686,#350687,#350688); +#350686 = CARTESIAN_POINT('',(136.,-127.5,0.)); +#350687 = DIRECTION('',(0.,0.,1.)); +#350688 = DIRECTION('',(1.,0.,-0.)); +#350689 = ADVANCED_FACE('',(#350690,#350693),#350704,.F.); +#350690 = FACE_BOUND('',#350691,.F.); +#350691 = EDGE_LOOP('',(#350692)); +#350692 = ORIENTED_EDGE('',*,*,#350678,.F.); +#350693 = FACE_BOUND('',#350694,.F.); +#350694 = EDGE_LOOP('',(#350695)); +#350695 = ORIENTED_EDGE('',*,*,#350696,.F.); +#350696 = EDGE_CURVE('',#350697,#350697,#350699,.T.); +#350697 = VERTEX_POINT('',#350698); +#350698 = CARTESIAN_POINT('',(136.,-127.935,0.)); +#350699 = CIRCLE('',#350700,0.435); +#350700 = AXIS2_PLACEMENT_3D('',#350701,#350702,#350703); +#350701 = CARTESIAN_POINT('',(136.,-127.5,0.)); +#350702 = DIRECTION('',(-0.,0.,-1.)); +#350703 = DIRECTION('',(-0.,-1.,0.)); +#350704 = PLANE('',#350705); +#350705 = AXIS2_PLACEMENT_3D('',#350706,#350707,#350708); +#350706 = CARTESIAN_POINT('',(0.,0.,0.)); +#350707 = DIRECTION('',(-0.,-0.,-1.)); +#350708 = DIRECTION('',(-1.,0.,0.)); +#350709 = ADVANCED_FACE('',(#350710,#350713),#350724,.T.); +#350710 = FACE_BOUND('',#350711,.T.); +#350711 = EDGE_LOOP('',(#350712)); +#350712 = ORIENTED_EDGE('',*,*,#350670,.F.); +#350713 = FACE_BOUND('',#350714,.T.); +#350714 = EDGE_LOOP('',(#350715)); +#350715 = ORIENTED_EDGE('',*,*,#350716,.F.); +#350716 = EDGE_CURVE('',#350717,#350717,#350719,.T.); +#350717 = VERTEX_POINT('',#350718); +#350718 = CARTESIAN_POINT('',(136.,-127.935,-4.E-02)); +#350719 = CIRCLE('',#350720,0.435); +#350720 = AXIS2_PLACEMENT_3D('',#350721,#350722,#350723); +#350721 = CARTESIAN_POINT('',(136.,-127.5,-4.E-02)); +#350722 = DIRECTION('',(-0.,0.,-1.)); +#350723 = DIRECTION('',(-0.,-1.,0.)); +#350724 = PLANE('',#350725); +#350725 = AXIS2_PLACEMENT_3D('',#350726,#350727,#350728); +#350726 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#350727 = DIRECTION('',(-0.,-0.,-1.)); +#350728 = DIRECTION('',(-1.,0.,0.)); +#350729 = ADVANCED_FACE('',(#350730),#350741,.F.); +#350730 = FACE_BOUND('',#350731,.T.); +#350731 = EDGE_LOOP('',(#350732,#350733,#350739,#350740)); +#350732 = ORIENTED_EDGE('',*,*,#350716,.T.); +#350733 = ORIENTED_EDGE('',*,*,#350734,.T.); +#350734 = EDGE_CURVE('',#350717,#350697,#350735,.T.); +#350735 = LINE('',#350736,#350737); +#350736 = CARTESIAN_POINT('',(136.,-127.935,-4.6E-02)); +#350737 = VECTOR('',#350738,1.); +#350738 = DIRECTION('',(0.,0.,1.)); +#350739 = ORIENTED_EDGE('',*,*,#350696,.F.); +#350740 = ORIENTED_EDGE('',*,*,#350734,.F.); +#350741 = CYLINDRICAL_SURFACE('',#350742,0.435); +#350742 = AXIS2_PLACEMENT_3D('',#350743,#350744,#350745); +#350743 = CARTESIAN_POINT('',(136.,-127.5,-4.6E-02)); +#350744 = DIRECTION('',(-0.,-0.,-1.)); +#350745 = DIRECTION('',(-0.,-1.,0.)); +#350746 = MANIFOLD_SOLID_BREP('',#350747); +#350747 = CLOSED_SHELL('',(#350748,#350781,#350801,#350821)); +#350748 = ADVANCED_FACE('',(#350749),#350776,.T.); +#350749 = FACE_BOUND('',#350750,.F.); +#350750 = EDGE_LOOP('',(#350751,#350761,#350768,#350769)); +#350751 = ORIENTED_EDGE('',*,*,#350752,.T.); +#350752 = EDGE_CURVE('',#350753,#350755,#350757,.T.); +#350753 = VERTEX_POINT('',#350754); +#350754 = CARTESIAN_POINT('',(136.,-127.96,-4.E-02)); +#350755 = VERTEX_POINT('',#350756); +#350756 = CARTESIAN_POINT('',(136.,-127.96,1.55)); +#350757 = LINE('',#350758,#350759); +#350758 = CARTESIAN_POINT('',(136.,-127.96,-4.E-02)); +#350759 = VECTOR('',#350760,1.); +#350760 = DIRECTION('',(0.,0.,1.)); +#350761 = ORIENTED_EDGE('',*,*,#350762,.T.); +#350762 = EDGE_CURVE('',#350755,#350755,#350763,.T.); +#350763 = CIRCLE('',#350764,0.46); +#350764 = AXIS2_PLACEMENT_3D('',#350765,#350766,#350767); +#350765 = CARTESIAN_POINT('',(136.,-127.5,1.55)); +#350766 = DIRECTION('',(0.,0.,1.)); +#350767 = DIRECTION('',(-0.,-1.,0.)); +#350768 = ORIENTED_EDGE('',*,*,#350752,.F.); +#350769 = ORIENTED_EDGE('',*,*,#350770,.F.); +#350770 = EDGE_CURVE('',#350753,#350753,#350771,.T.); +#350771 = CIRCLE('',#350772,0.46); +#350772 = AXIS2_PLACEMENT_3D('',#350773,#350774,#350775); +#350773 = CARTESIAN_POINT('',(136.,-127.5,-4.E-02)); +#350774 = DIRECTION('',(0.,0.,1.)); +#350775 = DIRECTION('',(-0.,-1.,0.)); +#350776 = CYLINDRICAL_SURFACE('',#350777,0.46); +#350777 = AXIS2_PLACEMENT_3D('',#350778,#350779,#350780); +#350778 = CARTESIAN_POINT('',(136.,-127.5,-4.E-02)); +#350779 = DIRECTION('',(-0.,-0.,-1.)); +#350780 = DIRECTION('',(-0.,-1.,0.)); +#350781 = ADVANCED_FACE('',(#350782,#350785),#350796,.F.); +#350782 = FACE_BOUND('',#350783,.F.); +#350783 = EDGE_LOOP('',(#350784)); +#350784 = ORIENTED_EDGE('',*,*,#350770,.T.); +#350785 = FACE_BOUND('',#350786,.F.); +#350786 = EDGE_LOOP('',(#350787)); +#350787 = ORIENTED_EDGE('',*,*,#350788,.T.); +#350788 = EDGE_CURVE('',#350789,#350789,#350791,.T.); +#350789 = VERTEX_POINT('',#350790); +#350790 = CARTESIAN_POINT('',(136.,-127.935,-4.E-02)); +#350791 = CIRCLE('',#350792,0.435); +#350792 = AXIS2_PLACEMENT_3D('',#350793,#350794,#350795); +#350793 = CARTESIAN_POINT('',(136.,-127.5,-4.E-02)); +#350794 = DIRECTION('',(-0.,0.,-1.)); +#350795 = DIRECTION('',(-0.,-1.,0.)); +#350796 = PLANE('',#350797); +#350797 = AXIS2_PLACEMENT_3D('',#350798,#350799,#350800); +#350798 = CARTESIAN_POINT('',(136.,-127.96,-4.E-02)); +#350799 = DIRECTION('',(0.,0.,1.)); +#350800 = DIRECTION('',(1.,0.,-0.)); +#350801 = ADVANCED_FACE('',(#350802,#350805),#350816,.T.); +#350802 = FACE_BOUND('',#350803,.T.); +#350803 = EDGE_LOOP('',(#350804)); +#350804 = ORIENTED_EDGE('',*,*,#350762,.T.); +#350805 = FACE_BOUND('',#350806,.T.); +#350806 = EDGE_LOOP('',(#350807)); +#350807 = ORIENTED_EDGE('',*,*,#350808,.T.); +#350808 = EDGE_CURVE('',#350809,#350809,#350811,.T.); +#350809 = VERTEX_POINT('',#350810); +#350810 = CARTESIAN_POINT('',(136.,-127.935,1.55)); +#350811 = CIRCLE('',#350812,0.435); +#350812 = AXIS2_PLACEMENT_3D('',#350813,#350814,#350815); +#350813 = CARTESIAN_POINT('',(136.,-127.5,1.55)); +#350814 = DIRECTION('',(-0.,0.,-1.)); +#350815 = DIRECTION('',(-0.,-1.,0.)); +#350816 = PLANE('',#350817); +#350817 = AXIS2_PLACEMENT_3D('',#350818,#350819,#350820); +#350818 = CARTESIAN_POINT('',(136.,-127.96,1.55)); +#350819 = DIRECTION('',(0.,0.,1.)); +#350820 = DIRECTION('',(1.,0.,-0.)); +#350821 = ADVANCED_FACE('',(#350822),#350833,.F.); +#350822 = FACE_BOUND('',#350823,.T.); +#350823 = EDGE_LOOP('',(#350824,#350825,#350831,#350832)); +#350824 = ORIENTED_EDGE('',*,*,#350788,.T.); +#350825 = ORIENTED_EDGE('',*,*,#350826,.T.); +#350826 = EDGE_CURVE('',#350789,#350809,#350827,.T.); +#350827 = LINE('',#350828,#350829); +#350828 = CARTESIAN_POINT('',(136.,-127.935,-4.6E-02)); +#350829 = VECTOR('',#350830,1.); +#350830 = DIRECTION('',(0.,0.,1.)); +#350831 = ORIENTED_EDGE('',*,*,#350808,.F.); +#350832 = ORIENTED_EDGE('',*,*,#350826,.F.); +#350833 = CYLINDRICAL_SURFACE('',#350834,0.435); +#350834 = AXIS2_PLACEMENT_3D('',#350835,#350836,#350837); +#350835 = CARTESIAN_POINT('',(136.,-127.5,-4.6E-02)); +#350836 = DIRECTION('',(-0.,-0.,-1.)); +#350837 = DIRECTION('',(-0.,-1.,0.)); +#350838 = MANIFOLD_SOLID_BREP('',#350839); +#350839 = CLOSED_SHELL('',(#350840,#350880,#350911,#350942,#350964, + #350976)); +#350840 = ADVANCED_FACE('',(#350841),#350875,.T.); +#350841 = FACE_BOUND('',#350842,.T.); +#350842 = EDGE_LOOP('',(#350843,#350853,#350861,#350869)); +#350843 = ORIENTED_EDGE('',*,*,#350844,.T.); +#350844 = EDGE_CURVE('',#350845,#350847,#350849,.T.); +#350845 = VERTEX_POINT('',#350846); +#350846 = CARTESIAN_POINT('',(136.915,-83.16,1.51)); +#350847 = VERTEX_POINT('',#350848); +#350848 = CARTESIAN_POINT('',(136.915,-83.16,1.55)); +#350849 = LINE('',#350850,#350851); +#350850 = CARTESIAN_POINT('',(136.915,-83.16,1.51)); +#350851 = VECTOR('',#350852,1.); +#350852 = DIRECTION('',(0.,0.,1.)); +#350853 = ORIENTED_EDGE('',*,*,#350854,.T.); +#350854 = EDGE_CURVE('',#350847,#350855,#350857,.T.); +#350855 = VERTEX_POINT('',#350856); +#350856 = CARTESIAN_POINT('',(136.915,-81.66,1.55)); +#350857 = LINE('',#350858,#350859); +#350858 = CARTESIAN_POINT('',(136.915,-83.16,1.55)); +#350859 = VECTOR('',#350860,1.); +#350860 = DIRECTION('',(0.,1.,0.)); +#350861 = ORIENTED_EDGE('',*,*,#350862,.F.); +#350862 = EDGE_CURVE('',#350863,#350855,#350865,.T.); +#350863 = VERTEX_POINT('',#350864); +#350864 = CARTESIAN_POINT('',(136.915,-81.66,1.51)); +#350865 = LINE('',#350866,#350867); +#350866 = CARTESIAN_POINT('',(136.915,-81.66,1.51)); +#350867 = VECTOR('',#350868,1.); +#350868 = DIRECTION('',(0.,0.,1.)); +#350869 = ORIENTED_EDGE('',*,*,#350870,.F.); +#350870 = EDGE_CURVE('',#350845,#350863,#350871,.T.); +#350871 = LINE('',#350872,#350873); +#350872 = CARTESIAN_POINT('',(136.915,-83.16,1.51)); +#350873 = VECTOR('',#350874,1.); +#350874 = DIRECTION('',(0.,1.,0.)); +#350875 = PLANE('',#350876); +#350876 = AXIS2_PLACEMENT_3D('',#350877,#350878,#350879); +#350877 = CARTESIAN_POINT('',(136.915,-83.16,1.51)); +#350878 = DIRECTION('',(-1.,0.,0.)); +#350879 = DIRECTION('',(0.,1.,0.)); +#350880 = ADVANCED_FACE('',(#350881),#350906,.T.); +#350881 = FACE_BOUND('',#350882,.T.); +#350882 = EDGE_LOOP('',(#350883,#350884,#350892,#350900)); +#350883 = ORIENTED_EDGE('',*,*,#350862,.T.); +#350884 = ORIENTED_EDGE('',*,*,#350885,.T.); +#350885 = EDGE_CURVE('',#350855,#350886,#350888,.T.); +#350886 = VERTEX_POINT('',#350887); +#350887 = CARTESIAN_POINT('',(137.815,-81.66,1.55)); +#350888 = LINE('',#350889,#350890); +#350889 = CARTESIAN_POINT('',(136.915,-81.66,1.55)); +#350890 = VECTOR('',#350891,1.); +#350891 = DIRECTION('',(1.,0.,0.)); +#350892 = ORIENTED_EDGE('',*,*,#350893,.F.); +#350893 = EDGE_CURVE('',#350894,#350886,#350896,.T.); +#350894 = VERTEX_POINT('',#350895); +#350895 = CARTESIAN_POINT('',(137.815,-81.66,1.51)); +#350896 = LINE('',#350897,#350898); +#350897 = CARTESIAN_POINT('',(137.815,-81.66,1.51)); +#350898 = VECTOR('',#350899,1.); +#350899 = DIRECTION('',(0.,0.,1.)); +#350900 = ORIENTED_EDGE('',*,*,#350901,.F.); +#350901 = EDGE_CURVE('',#350863,#350894,#350902,.T.); +#350902 = LINE('',#350903,#350904); +#350903 = CARTESIAN_POINT('',(136.915,-81.66,1.51)); +#350904 = VECTOR('',#350905,1.); +#350905 = DIRECTION('',(1.,0.,0.)); +#350906 = PLANE('',#350907); +#350907 = AXIS2_PLACEMENT_3D('',#350908,#350909,#350910); +#350908 = CARTESIAN_POINT('',(136.915,-81.66,1.51)); +#350909 = DIRECTION('',(0.,1.,0.)); +#350910 = DIRECTION('',(1.,0.,0.)); +#350911 = ADVANCED_FACE('',(#350912),#350937,.T.); +#350912 = FACE_BOUND('',#350913,.T.); +#350913 = EDGE_LOOP('',(#350914,#350915,#350923,#350931)); +#350914 = ORIENTED_EDGE('',*,*,#350893,.T.); +#350915 = ORIENTED_EDGE('',*,*,#350916,.T.); +#350916 = EDGE_CURVE('',#350886,#350917,#350919,.T.); +#350917 = VERTEX_POINT('',#350918); +#350918 = CARTESIAN_POINT('',(137.815,-83.16,1.55)); +#350919 = LINE('',#350920,#350921); +#350920 = CARTESIAN_POINT('',(137.815,-81.66,1.55)); +#350921 = VECTOR('',#350922,1.); +#350922 = DIRECTION('',(0.,-1.,0.)); +#350923 = ORIENTED_EDGE('',*,*,#350924,.F.); +#350924 = EDGE_CURVE('',#350925,#350917,#350927,.T.); +#350925 = VERTEX_POINT('',#350926); +#350926 = CARTESIAN_POINT('',(137.815,-83.16,1.51)); +#350927 = LINE('',#350928,#350929); +#350928 = CARTESIAN_POINT('',(137.815,-83.16,1.51)); +#350929 = VECTOR('',#350930,1.); +#350930 = DIRECTION('',(0.,0.,1.)); +#350931 = ORIENTED_EDGE('',*,*,#350932,.F.); +#350932 = EDGE_CURVE('',#350894,#350925,#350933,.T.); +#350933 = LINE('',#350934,#350935); +#350934 = CARTESIAN_POINT('',(137.815,-81.66,1.51)); +#350935 = VECTOR('',#350936,1.); +#350936 = DIRECTION('',(0.,-1.,0.)); +#350937 = PLANE('',#350938); +#350938 = AXIS2_PLACEMENT_3D('',#350939,#350940,#350941); +#350939 = CARTESIAN_POINT('',(137.815,-81.66,1.51)); +#350940 = DIRECTION('',(1.,0.,-0.)); +#350941 = DIRECTION('',(0.,-1.,0.)); +#350942 = ADVANCED_FACE('',(#350943),#350959,.T.); +#350943 = FACE_BOUND('',#350944,.T.); +#350944 = EDGE_LOOP('',(#350945,#350946,#350952,#350953)); +#350945 = ORIENTED_EDGE('',*,*,#350924,.T.); +#350946 = ORIENTED_EDGE('',*,*,#350947,.T.); +#350947 = EDGE_CURVE('',#350917,#350847,#350948,.T.); +#350948 = LINE('',#350949,#350950); +#350949 = CARTESIAN_POINT('',(137.815,-83.16,1.55)); +#350950 = VECTOR('',#350951,1.); +#350951 = DIRECTION('',(-1.,0.,0.)); +#350952 = ORIENTED_EDGE('',*,*,#350844,.F.); +#350953 = ORIENTED_EDGE('',*,*,#350954,.F.); +#350954 = EDGE_CURVE('',#350925,#350845,#350955,.T.); +#350955 = LINE('',#350956,#350957); +#350956 = CARTESIAN_POINT('',(137.815,-83.16,1.51)); +#350957 = VECTOR('',#350958,1.); +#350958 = DIRECTION('',(-1.,0.,0.)); +#350959 = PLANE('',#350960); +#350960 = AXIS2_PLACEMENT_3D('',#350961,#350962,#350963); +#350961 = CARTESIAN_POINT('',(137.815,-83.16,1.51)); +#350962 = DIRECTION('',(0.,-1.,0.)); +#350963 = DIRECTION('',(-1.,0.,0.)); +#350964 = ADVANCED_FACE('',(#350965),#350971,.F.); +#350965 = FACE_BOUND('',#350966,.T.); +#350966 = EDGE_LOOP('',(#350967,#350968,#350969,#350970)); +#350967 = ORIENTED_EDGE('',*,*,#350870,.T.); +#350968 = ORIENTED_EDGE('',*,*,#350901,.T.); +#350969 = ORIENTED_EDGE('',*,*,#350932,.T.); +#350970 = ORIENTED_EDGE('',*,*,#350954,.T.); +#350971 = PLANE('',#350972); +#350972 = AXIS2_PLACEMENT_3D('',#350973,#350974,#350975); +#350973 = CARTESIAN_POINT('',(0.,0.,1.51)); +#350974 = DIRECTION('',(0.,0.,1.)); +#350975 = DIRECTION('',(1.,0.,-0.)); +#350976 = ADVANCED_FACE('',(#350977),#350983,.T.); +#350977 = FACE_BOUND('',#350978,.F.); +#350978 = EDGE_LOOP('',(#350979,#350980,#350981,#350982)); +#350979 = ORIENTED_EDGE('',*,*,#350854,.T.); +#350980 = ORIENTED_EDGE('',*,*,#350885,.T.); +#350981 = ORIENTED_EDGE('',*,*,#350916,.T.); +#350982 = ORIENTED_EDGE('',*,*,#350947,.T.); +#350983 = PLANE('',#350984); +#350984 = AXIS2_PLACEMENT_3D('',#350985,#350986,#350987); +#350985 = CARTESIAN_POINT('',(0.,0.,1.55)); +#350986 = DIRECTION('',(0.,0.,1.)); +#350987 = DIRECTION('',(1.,0.,-0.)); +#350988 = MANIFOLD_SOLID_BREP('',#350989); +#350989 = CLOSED_SHELL('',(#350990,#351023,#351043,#351063)); +#350990 = ADVANCED_FACE('',(#350991),#351018,.T.); +#350991 = FACE_BOUND('',#350992,.F.); +#350992 = EDGE_LOOP('',(#350993,#351003,#351010,#351011)); +#350993 = ORIENTED_EDGE('',*,*,#350994,.T.); +#350994 = EDGE_CURVE('',#350995,#350997,#350999,.T.); +#350995 = VERTEX_POINT('',#350996); +#350996 = CARTESIAN_POINT('',(124.7155,-149.5,1.51)); +#350997 = VERTEX_POINT('',#350998); +#350998 = CARTESIAN_POINT('',(124.7155,-149.5,1.55)); +#350999 = LINE('',#351000,#351001); +#351000 = CARTESIAN_POINT('',(124.7155,-149.5,1.51)); +#351001 = VECTOR('',#351002,1.); +#351002 = DIRECTION('',(0.,0.,1.)); +#351003 = ORIENTED_EDGE('',*,*,#351004,.T.); +#351004 = EDGE_CURVE('',#350997,#350997,#351005,.T.); +#351005 = CIRCLE('',#351006,0.7155); +#351006 = AXIS2_PLACEMENT_3D('',#351007,#351008,#351009); +#351007 = CARTESIAN_POINT('',(124.,-149.5,1.55)); +#351008 = DIRECTION('',(0.,0.,1.)); +#351009 = DIRECTION('',(1.,0.,-0.)); +#351010 = ORIENTED_EDGE('',*,*,#350994,.F.); +#351011 = ORIENTED_EDGE('',*,*,#351012,.F.); +#351012 = EDGE_CURVE('',#350995,#350995,#351013,.T.); +#351013 = CIRCLE('',#351014,0.7155); +#351014 = AXIS2_PLACEMENT_3D('',#351015,#351016,#351017); +#351015 = CARTESIAN_POINT('',(124.,-149.5,1.51)); +#351016 = DIRECTION('',(0.,0.,1.)); +#351017 = DIRECTION('',(1.,0.,-0.)); +#351018 = CYLINDRICAL_SURFACE('',#351019,0.7155); +#351019 = AXIS2_PLACEMENT_3D('',#351020,#351021,#351022); +#351020 = CARTESIAN_POINT('',(124.,-149.5,1.51)); +#351021 = DIRECTION('',(-0.,-0.,-1.)); +#351022 = DIRECTION('',(1.,0.,-0.)); +#351023 = ADVANCED_FACE('',(#351024,#351027),#351038,.F.); +#351024 = FACE_BOUND('',#351025,.F.); +#351025 = EDGE_LOOP('',(#351026)); +#351026 = ORIENTED_EDGE('',*,*,#351012,.T.); +#351027 = FACE_BOUND('',#351028,.F.); +#351028 = EDGE_LOOP('',(#351029)); +#351029 = ORIENTED_EDGE('',*,*,#351030,.T.); +#351030 = EDGE_CURVE('',#351031,#351031,#351033,.T.); +#351031 = VERTEX_POINT('',#351032); +#351032 = CARTESIAN_POINT('',(124.,-149.935,1.51)); +#351033 = CIRCLE('',#351034,0.435); +#351034 = AXIS2_PLACEMENT_3D('',#351035,#351036,#351037); +#351035 = CARTESIAN_POINT('',(124.,-149.5,1.51)); +#351036 = DIRECTION('',(-0.,0.,-1.)); +#351037 = DIRECTION('',(-0.,-1.,0.)); +#351038 = PLANE('',#351039); +#351039 = AXIS2_PLACEMENT_3D('',#351040,#351041,#351042); +#351040 = CARTESIAN_POINT('',(0.,0.,1.51)); +#351041 = DIRECTION('',(0.,0.,1.)); +#351042 = DIRECTION('',(1.,0.,-0.)); +#351043 = ADVANCED_FACE('',(#351044,#351047),#351058,.T.); +#351044 = FACE_BOUND('',#351045,.T.); +#351045 = EDGE_LOOP('',(#351046)); +#351046 = ORIENTED_EDGE('',*,*,#351004,.T.); +#351047 = FACE_BOUND('',#351048,.T.); +#351048 = EDGE_LOOP('',(#351049)); +#351049 = ORIENTED_EDGE('',*,*,#351050,.T.); +#351050 = EDGE_CURVE('',#351051,#351051,#351053,.T.); +#351051 = VERTEX_POINT('',#351052); +#351052 = CARTESIAN_POINT('',(124.,-149.935,1.55)); +#351053 = CIRCLE('',#351054,0.435); +#351054 = AXIS2_PLACEMENT_3D('',#351055,#351056,#351057); +#351055 = CARTESIAN_POINT('',(124.,-149.5,1.55)); +#351056 = DIRECTION('',(-0.,0.,-1.)); +#351057 = DIRECTION('',(-0.,-1.,0.)); +#351058 = PLANE('',#351059); +#351059 = AXIS2_PLACEMENT_3D('',#351060,#351061,#351062); +#351060 = CARTESIAN_POINT('',(0.,0.,1.55)); +#351061 = DIRECTION('',(0.,0.,1.)); +#351062 = DIRECTION('',(1.,0.,-0.)); +#351063 = ADVANCED_FACE('',(#351064),#351075,.F.); +#351064 = FACE_BOUND('',#351065,.T.); +#351065 = EDGE_LOOP('',(#351066,#351067,#351073,#351074)); +#351066 = ORIENTED_EDGE('',*,*,#351030,.T.); +#351067 = ORIENTED_EDGE('',*,*,#351068,.T.); +#351068 = EDGE_CURVE('',#351031,#351051,#351069,.T.); +#351069 = LINE('',#351070,#351071); +#351070 = CARTESIAN_POINT('',(124.,-149.935,-4.6E-02)); +#351071 = VECTOR('',#351072,1.); +#351072 = DIRECTION('',(0.,0.,1.)); +#351073 = ORIENTED_EDGE('',*,*,#351050,.F.); +#351074 = ORIENTED_EDGE('',*,*,#351068,.F.); +#351075 = CYLINDRICAL_SURFACE('',#351076,0.435); +#351076 = AXIS2_PLACEMENT_3D('',#351077,#351078,#351079); +#351077 = CARTESIAN_POINT('',(124.,-149.5,-4.6E-02)); +#351078 = DIRECTION('',(-0.,-0.,-1.)); +#351079 = DIRECTION('',(-0.,-1.,0.)); +#351080 = MANIFOLD_SOLID_BREP('',#351081); +#351081 = CLOSED_SHELL('',(#351082,#351115,#351135,#351155)); +#351082 = ADVANCED_FACE('',(#351083),#351110,.T.); +#351083 = FACE_BOUND('',#351084,.T.); +#351084 = EDGE_LOOP('',(#351085,#351095,#351102,#351103)); +#351085 = ORIENTED_EDGE('',*,*,#351086,.T.); +#351086 = EDGE_CURVE('',#351087,#351089,#351091,.T.); +#351087 = VERTEX_POINT('',#351088); +#351088 = CARTESIAN_POINT('',(124.7155,-149.5,0.)); +#351089 = VERTEX_POINT('',#351090); +#351090 = CARTESIAN_POINT('',(124.7155,-149.5,-4.E-02)); +#351091 = LINE('',#351092,#351093); +#351092 = CARTESIAN_POINT('',(124.7155,-149.5,0.)); +#351093 = VECTOR('',#351094,1.); +#351094 = DIRECTION('',(0.,0.,-1.)); +#351095 = ORIENTED_EDGE('',*,*,#351096,.T.); +#351096 = EDGE_CURVE('',#351089,#351089,#351097,.T.); +#351097 = CIRCLE('',#351098,0.7155); +#351098 = AXIS2_PLACEMENT_3D('',#351099,#351100,#351101); +#351099 = CARTESIAN_POINT('',(124.,-149.5,-4.E-02)); +#351100 = DIRECTION('',(0.,0.,1.)); +#351101 = DIRECTION('',(1.,0.,-0.)); +#351102 = ORIENTED_EDGE('',*,*,#351086,.F.); +#351103 = ORIENTED_EDGE('',*,*,#351104,.F.); +#351104 = EDGE_CURVE('',#351087,#351087,#351105,.T.); +#351105 = CIRCLE('',#351106,0.7155); +#351106 = AXIS2_PLACEMENT_3D('',#351107,#351108,#351109); +#351107 = CARTESIAN_POINT('',(124.,-149.5,0.)); +#351108 = DIRECTION('',(0.,0.,1.)); +#351109 = DIRECTION('',(1.,0.,-0.)); +#351110 = CYLINDRICAL_SURFACE('',#351111,0.7155); +#351111 = AXIS2_PLACEMENT_3D('',#351112,#351113,#351114); +#351112 = CARTESIAN_POINT('',(124.,-149.5,0.)); +#351113 = DIRECTION('',(0.,0.,1.)); +#351114 = DIRECTION('',(1.,0.,-0.)); +#351115 = ADVANCED_FACE('',(#351116,#351119),#351130,.F.); +#351116 = FACE_BOUND('',#351117,.F.); +#351117 = EDGE_LOOP('',(#351118)); +#351118 = ORIENTED_EDGE('',*,*,#351104,.F.); +#351119 = FACE_BOUND('',#351120,.F.); +#351120 = EDGE_LOOP('',(#351121)); +#351121 = ORIENTED_EDGE('',*,*,#351122,.F.); +#351122 = EDGE_CURVE('',#351123,#351123,#351125,.T.); +#351123 = VERTEX_POINT('',#351124); +#351124 = CARTESIAN_POINT('',(124.,-149.935,0.)); +#351125 = CIRCLE('',#351126,0.435); +#351126 = AXIS2_PLACEMENT_3D('',#351127,#351128,#351129); +#351127 = CARTESIAN_POINT('',(124.,-149.5,0.)); +#351128 = DIRECTION('',(-0.,0.,-1.)); +#351129 = DIRECTION('',(-0.,-1.,0.)); +#351130 = PLANE('',#351131); +#351131 = AXIS2_PLACEMENT_3D('',#351132,#351133,#351134); +#351132 = CARTESIAN_POINT('',(0.,0.,0.)); +#351133 = DIRECTION('',(-0.,-0.,-1.)); +#351134 = DIRECTION('',(-1.,0.,0.)); +#351135 = ADVANCED_FACE('',(#351136,#351139),#351150,.T.); +#351136 = FACE_BOUND('',#351137,.T.); +#351137 = EDGE_LOOP('',(#351138)); +#351138 = ORIENTED_EDGE('',*,*,#351096,.F.); +#351139 = FACE_BOUND('',#351140,.T.); +#351140 = EDGE_LOOP('',(#351141)); +#351141 = ORIENTED_EDGE('',*,*,#351142,.F.); +#351142 = EDGE_CURVE('',#351143,#351143,#351145,.T.); +#351143 = VERTEX_POINT('',#351144); +#351144 = CARTESIAN_POINT('',(124.,-149.935,-4.E-02)); +#351145 = CIRCLE('',#351146,0.435); +#351146 = AXIS2_PLACEMENT_3D('',#351147,#351148,#351149); +#351147 = CARTESIAN_POINT('',(124.,-149.5,-4.E-02)); +#351148 = DIRECTION('',(-0.,0.,-1.)); +#351149 = DIRECTION('',(-0.,-1.,0.)); +#351150 = PLANE('',#351151); +#351151 = AXIS2_PLACEMENT_3D('',#351152,#351153,#351154); +#351152 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#351153 = DIRECTION('',(-0.,-0.,-1.)); +#351154 = DIRECTION('',(-1.,0.,0.)); +#351155 = ADVANCED_FACE('',(#351156),#351167,.F.); +#351156 = FACE_BOUND('',#351157,.T.); +#351157 = EDGE_LOOP('',(#351158,#351159,#351165,#351166)); +#351158 = ORIENTED_EDGE('',*,*,#351142,.T.); +#351159 = ORIENTED_EDGE('',*,*,#351160,.T.); +#351160 = EDGE_CURVE('',#351143,#351123,#351161,.T.); +#351161 = LINE('',#351162,#351163); +#351162 = CARTESIAN_POINT('',(124.,-149.935,-4.6E-02)); +#351163 = VECTOR('',#351164,1.); +#351164 = DIRECTION('',(0.,0.,1.)); +#351165 = ORIENTED_EDGE('',*,*,#351122,.F.); +#351166 = ORIENTED_EDGE('',*,*,#351160,.F.); +#351167 = CYLINDRICAL_SURFACE('',#351168,0.435); +#351168 = AXIS2_PLACEMENT_3D('',#351169,#351170,#351171); +#351169 = CARTESIAN_POINT('',(124.,-149.5,-4.6E-02)); +#351170 = DIRECTION('',(-0.,-0.,-1.)); +#351171 = DIRECTION('',(-0.,-1.,0.)); +#351172 = MANIFOLD_SOLID_BREP('',#351173); +#351173 = CLOSED_SHELL('',(#351174,#351207,#351227,#351247)); +#351174 = ADVANCED_FACE('',(#351175),#351202,.T.); +#351175 = FACE_BOUND('',#351176,.F.); +#351176 = EDGE_LOOP('',(#351177,#351187,#351194,#351195)); +#351177 = ORIENTED_EDGE('',*,*,#351178,.T.); +#351178 = EDGE_CURVE('',#351179,#351181,#351183,.T.); +#351179 = VERTEX_POINT('',#351180); +#351180 = CARTESIAN_POINT('',(124.,-149.96,-4.E-02)); +#351181 = VERTEX_POINT('',#351182); +#351182 = CARTESIAN_POINT('',(124.,-149.96,1.55)); +#351183 = LINE('',#351184,#351185); +#351184 = CARTESIAN_POINT('',(124.,-149.96,-4.E-02)); +#351185 = VECTOR('',#351186,1.); +#351186 = DIRECTION('',(0.,0.,1.)); +#351187 = ORIENTED_EDGE('',*,*,#351188,.T.); +#351188 = EDGE_CURVE('',#351181,#351181,#351189,.T.); +#351189 = CIRCLE('',#351190,0.46); +#351190 = AXIS2_PLACEMENT_3D('',#351191,#351192,#351193); +#351191 = CARTESIAN_POINT('',(124.,-149.5,1.55)); +#351192 = DIRECTION('',(0.,0.,1.)); +#351193 = DIRECTION('',(-0.,-1.,0.)); +#351194 = ORIENTED_EDGE('',*,*,#351178,.F.); +#351195 = ORIENTED_EDGE('',*,*,#351196,.F.); +#351196 = EDGE_CURVE('',#351179,#351179,#351197,.T.); +#351197 = CIRCLE('',#351198,0.46); +#351198 = AXIS2_PLACEMENT_3D('',#351199,#351200,#351201); +#351199 = CARTESIAN_POINT('',(124.,-149.5,-4.E-02)); +#351200 = DIRECTION('',(0.,0.,1.)); +#351201 = DIRECTION('',(-0.,-1.,0.)); +#351202 = CYLINDRICAL_SURFACE('',#351203,0.46); +#351203 = AXIS2_PLACEMENT_3D('',#351204,#351205,#351206); +#351204 = CARTESIAN_POINT('',(124.,-149.5,-4.E-02)); +#351205 = DIRECTION('',(-0.,-0.,-1.)); +#351206 = DIRECTION('',(-0.,-1.,0.)); +#351207 = ADVANCED_FACE('',(#351208,#351211),#351222,.F.); +#351208 = FACE_BOUND('',#351209,.F.); +#351209 = EDGE_LOOP('',(#351210)); +#351210 = ORIENTED_EDGE('',*,*,#351196,.T.); +#351211 = FACE_BOUND('',#351212,.F.); +#351212 = EDGE_LOOP('',(#351213)); +#351213 = ORIENTED_EDGE('',*,*,#351214,.T.); +#351214 = EDGE_CURVE('',#351215,#351215,#351217,.T.); +#351215 = VERTEX_POINT('',#351216); +#351216 = CARTESIAN_POINT('',(124.,-149.935,-4.E-02)); +#351217 = CIRCLE('',#351218,0.435); +#351218 = AXIS2_PLACEMENT_3D('',#351219,#351220,#351221); +#351219 = CARTESIAN_POINT('',(124.,-149.5,-4.E-02)); +#351220 = DIRECTION('',(-0.,0.,-1.)); +#351221 = DIRECTION('',(-0.,-1.,0.)); +#351222 = PLANE('',#351223); +#351223 = AXIS2_PLACEMENT_3D('',#351224,#351225,#351226); +#351224 = CARTESIAN_POINT('',(124.,-149.96,-4.E-02)); +#351225 = DIRECTION('',(0.,0.,1.)); +#351226 = DIRECTION('',(1.,0.,-0.)); +#351227 = ADVANCED_FACE('',(#351228,#351231),#351242,.T.); +#351228 = FACE_BOUND('',#351229,.T.); +#351229 = EDGE_LOOP('',(#351230)); +#351230 = ORIENTED_EDGE('',*,*,#351188,.T.); +#351231 = FACE_BOUND('',#351232,.T.); +#351232 = EDGE_LOOP('',(#351233)); +#351233 = ORIENTED_EDGE('',*,*,#351234,.T.); +#351234 = EDGE_CURVE('',#351235,#351235,#351237,.T.); +#351235 = VERTEX_POINT('',#351236); +#351236 = CARTESIAN_POINT('',(124.,-149.935,1.55)); +#351237 = CIRCLE('',#351238,0.435); +#351238 = AXIS2_PLACEMENT_3D('',#351239,#351240,#351241); +#351239 = CARTESIAN_POINT('',(124.,-149.5,1.55)); +#351240 = DIRECTION('',(-0.,0.,-1.)); +#351241 = DIRECTION('',(-0.,-1.,0.)); +#351242 = PLANE('',#351243); +#351243 = AXIS2_PLACEMENT_3D('',#351244,#351245,#351246); +#351244 = CARTESIAN_POINT('',(124.,-149.96,1.55)); +#351245 = DIRECTION('',(0.,0.,1.)); +#351246 = DIRECTION('',(1.,0.,-0.)); +#351247 = ADVANCED_FACE('',(#351248),#351259,.F.); +#351248 = FACE_BOUND('',#351249,.T.); +#351249 = EDGE_LOOP('',(#351250,#351251,#351257,#351258)); +#351250 = ORIENTED_EDGE('',*,*,#351214,.T.); +#351251 = ORIENTED_EDGE('',*,*,#351252,.T.); +#351252 = EDGE_CURVE('',#351215,#351235,#351253,.T.); +#351253 = LINE('',#351254,#351255); +#351254 = CARTESIAN_POINT('',(124.,-149.935,-4.6E-02)); +#351255 = VECTOR('',#351256,1.); +#351256 = DIRECTION('',(0.,0.,1.)); +#351257 = ORIENTED_EDGE('',*,*,#351234,.F.); +#351258 = ORIENTED_EDGE('',*,*,#351252,.F.); +#351259 = CYLINDRICAL_SURFACE('',#351260,0.435); +#351260 = AXIS2_PLACEMENT_3D('',#351261,#351262,#351263); +#351261 = CARTESIAN_POINT('',(124.,-149.5,-4.6E-02)); +#351262 = DIRECTION('',(-0.,-0.,-1.)); +#351263 = DIRECTION('',(-0.,-1.,0.)); +#351264 = MANIFOLD_SOLID_BREP('',#351265); +#351265 = CLOSED_SHELL('',(#351266,#351306,#351337,#351368,#351390, + #351402)); +#351266 = ADVANCED_FACE('',(#351267),#351301,.T.); +#351267 = FACE_BOUND('',#351268,.T.); +#351268 = EDGE_LOOP('',(#351269,#351279,#351287,#351295)); +#351269 = ORIENTED_EDGE('',*,*,#351270,.T.); +#351270 = EDGE_CURVE('',#351271,#351273,#351275,.T.); +#351271 = VERTEX_POINT('',#351272); +#351272 = CARTESIAN_POINT('',(135.645,-83.16,1.51)); +#351273 = VERTEX_POINT('',#351274); +#351274 = CARTESIAN_POINT('',(135.645,-83.16,1.55)); +#351275 = LINE('',#351276,#351277); +#351276 = CARTESIAN_POINT('',(135.645,-83.16,1.51)); +#351277 = VECTOR('',#351278,1.); +#351278 = DIRECTION('',(0.,0.,1.)); +#351279 = ORIENTED_EDGE('',*,*,#351280,.T.); +#351280 = EDGE_CURVE('',#351273,#351281,#351283,.T.); +#351281 = VERTEX_POINT('',#351282); +#351282 = CARTESIAN_POINT('',(135.645,-81.66,1.55)); +#351283 = LINE('',#351284,#351285); +#351284 = CARTESIAN_POINT('',(135.645,-83.16,1.55)); +#351285 = VECTOR('',#351286,1.); +#351286 = DIRECTION('',(0.,1.,0.)); +#351287 = ORIENTED_EDGE('',*,*,#351288,.F.); +#351288 = EDGE_CURVE('',#351289,#351281,#351291,.T.); +#351289 = VERTEX_POINT('',#351290); +#351290 = CARTESIAN_POINT('',(135.645,-81.66,1.51)); +#351291 = LINE('',#351292,#351293); +#351292 = CARTESIAN_POINT('',(135.645,-81.66,1.51)); +#351293 = VECTOR('',#351294,1.); +#351294 = DIRECTION('',(0.,0.,1.)); +#351295 = ORIENTED_EDGE('',*,*,#351296,.F.); +#351296 = EDGE_CURVE('',#351271,#351289,#351297,.T.); +#351297 = LINE('',#351298,#351299); +#351298 = CARTESIAN_POINT('',(135.645,-83.16,1.51)); +#351299 = VECTOR('',#351300,1.); +#351300 = DIRECTION('',(0.,1.,0.)); +#351301 = PLANE('',#351302); +#351302 = AXIS2_PLACEMENT_3D('',#351303,#351304,#351305); +#351303 = CARTESIAN_POINT('',(135.645,-83.16,1.51)); +#351304 = DIRECTION('',(-1.,0.,0.)); +#351305 = DIRECTION('',(0.,1.,0.)); +#351306 = ADVANCED_FACE('',(#351307),#351332,.T.); +#351307 = FACE_BOUND('',#351308,.T.); +#351308 = EDGE_LOOP('',(#351309,#351310,#351318,#351326)); +#351309 = ORIENTED_EDGE('',*,*,#351288,.T.); +#351310 = ORIENTED_EDGE('',*,*,#351311,.T.); +#351311 = EDGE_CURVE('',#351281,#351312,#351314,.T.); +#351312 = VERTEX_POINT('',#351313); +#351313 = CARTESIAN_POINT('',(136.545,-81.66,1.55)); +#351314 = LINE('',#351315,#351316); +#351315 = CARTESIAN_POINT('',(135.645,-81.66,1.55)); +#351316 = VECTOR('',#351317,1.); +#351317 = DIRECTION('',(1.,0.,0.)); +#351318 = ORIENTED_EDGE('',*,*,#351319,.F.); +#351319 = EDGE_CURVE('',#351320,#351312,#351322,.T.); +#351320 = VERTEX_POINT('',#351321); +#351321 = CARTESIAN_POINT('',(136.545,-81.66,1.51)); +#351322 = LINE('',#351323,#351324); +#351323 = CARTESIAN_POINT('',(136.545,-81.66,1.51)); +#351324 = VECTOR('',#351325,1.); +#351325 = DIRECTION('',(0.,0.,1.)); +#351326 = ORIENTED_EDGE('',*,*,#351327,.F.); +#351327 = EDGE_CURVE('',#351289,#351320,#351328,.T.); +#351328 = LINE('',#351329,#351330); +#351329 = CARTESIAN_POINT('',(135.645,-81.66,1.51)); +#351330 = VECTOR('',#351331,1.); +#351331 = DIRECTION('',(1.,0.,0.)); +#351332 = PLANE('',#351333); +#351333 = AXIS2_PLACEMENT_3D('',#351334,#351335,#351336); +#351334 = CARTESIAN_POINT('',(135.645,-81.66,1.51)); +#351335 = DIRECTION('',(0.,1.,0.)); +#351336 = DIRECTION('',(1.,0.,0.)); +#351337 = ADVANCED_FACE('',(#351338),#351363,.T.); +#351338 = FACE_BOUND('',#351339,.T.); +#351339 = EDGE_LOOP('',(#351340,#351341,#351349,#351357)); +#351340 = ORIENTED_EDGE('',*,*,#351319,.T.); +#351341 = ORIENTED_EDGE('',*,*,#351342,.T.); +#351342 = EDGE_CURVE('',#351312,#351343,#351345,.T.); +#351343 = VERTEX_POINT('',#351344); +#351344 = CARTESIAN_POINT('',(136.545,-83.16,1.55)); +#351345 = LINE('',#351346,#351347); +#351346 = CARTESIAN_POINT('',(136.545,-81.66,1.55)); +#351347 = VECTOR('',#351348,1.); +#351348 = DIRECTION('',(0.,-1.,0.)); +#351349 = ORIENTED_EDGE('',*,*,#351350,.F.); +#351350 = EDGE_CURVE('',#351351,#351343,#351353,.T.); +#351351 = VERTEX_POINT('',#351352); +#351352 = CARTESIAN_POINT('',(136.545,-83.16,1.51)); +#351353 = LINE('',#351354,#351355); +#351354 = CARTESIAN_POINT('',(136.545,-83.16,1.51)); +#351355 = VECTOR('',#351356,1.); +#351356 = DIRECTION('',(0.,0.,1.)); +#351357 = ORIENTED_EDGE('',*,*,#351358,.F.); +#351358 = EDGE_CURVE('',#351320,#351351,#351359,.T.); +#351359 = LINE('',#351360,#351361); +#351360 = CARTESIAN_POINT('',(136.545,-81.66,1.51)); +#351361 = VECTOR('',#351362,1.); +#351362 = DIRECTION('',(0.,-1.,0.)); +#351363 = PLANE('',#351364); +#351364 = AXIS2_PLACEMENT_3D('',#351365,#351366,#351367); +#351365 = CARTESIAN_POINT('',(136.545,-81.66,1.51)); +#351366 = DIRECTION('',(1.,0.,-0.)); +#351367 = DIRECTION('',(0.,-1.,0.)); +#351368 = ADVANCED_FACE('',(#351369),#351385,.T.); +#351369 = FACE_BOUND('',#351370,.T.); +#351370 = EDGE_LOOP('',(#351371,#351372,#351378,#351379)); +#351371 = ORIENTED_EDGE('',*,*,#351350,.T.); +#351372 = ORIENTED_EDGE('',*,*,#351373,.T.); +#351373 = EDGE_CURVE('',#351343,#351273,#351374,.T.); +#351374 = LINE('',#351375,#351376); +#351375 = CARTESIAN_POINT('',(136.545,-83.16,1.55)); +#351376 = VECTOR('',#351377,1.); +#351377 = DIRECTION('',(-1.,0.,0.)); +#351378 = ORIENTED_EDGE('',*,*,#351270,.F.); +#351379 = ORIENTED_EDGE('',*,*,#351380,.F.); +#351380 = EDGE_CURVE('',#351351,#351271,#351381,.T.); +#351381 = LINE('',#351382,#351383); +#351382 = CARTESIAN_POINT('',(136.545,-83.16,1.51)); +#351383 = VECTOR('',#351384,1.); +#351384 = DIRECTION('',(-1.,0.,0.)); +#351385 = PLANE('',#351386); +#351386 = AXIS2_PLACEMENT_3D('',#351387,#351388,#351389); +#351387 = CARTESIAN_POINT('',(136.545,-83.16,1.51)); +#351388 = DIRECTION('',(0.,-1.,0.)); +#351389 = DIRECTION('',(-1.,0.,0.)); +#351390 = ADVANCED_FACE('',(#351391),#351397,.F.); +#351391 = FACE_BOUND('',#351392,.T.); +#351392 = EDGE_LOOP('',(#351393,#351394,#351395,#351396)); +#351393 = ORIENTED_EDGE('',*,*,#351296,.T.); +#351394 = ORIENTED_EDGE('',*,*,#351327,.T.); +#351395 = ORIENTED_EDGE('',*,*,#351358,.T.); +#351396 = ORIENTED_EDGE('',*,*,#351380,.T.); +#351397 = PLANE('',#351398); +#351398 = AXIS2_PLACEMENT_3D('',#351399,#351400,#351401); +#351399 = CARTESIAN_POINT('',(0.,0.,1.51)); +#351400 = DIRECTION('',(0.,0.,1.)); +#351401 = DIRECTION('',(1.,0.,-0.)); +#351402 = ADVANCED_FACE('',(#351403),#351409,.T.); +#351403 = FACE_BOUND('',#351404,.F.); +#351404 = EDGE_LOOP('',(#351405,#351406,#351407,#351408)); +#351405 = ORIENTED_EDGE('',*,*,#351280,.T.); +#351406 = ORIENTED_EDGE('',*,*,#351311,.T.); +#351407 = ORIENTED_EDGE('',*,*,#351342,.T.); +#351408 = ORIENTED_EDGE('',*,*,#351373,.T.); +#351409 = PLANE('',#351410); +#351410 = AXIS2_PLACEMENT_3D('',#351411,#351412,#351413); +#351411 = CARTESIAN_POINT('',(0.,0.,1.55)); +#351412 = DIRECTION('',(0.,0.,1.)); +#351413 = DIRECTION('',(1.,0.,-0.)); +#351414 = MANIFOLD_SOLID_BREP('',#351415); +#351415 = CLOSED_SHELL('',(#351416,#351449,#351469,#351489)); +#351416 = ADVANCED_FACE('',(#351417),#351444,.T.); +#351417 = FACE_BOUND('',#351418,.F.); +#351418 = EDGE_LOOP('',(#351419,#351429,#351436,#351437)); +#351419 = ORIENTED_EDGE('',*,*,#351420,.T.); +#351420 = EDGE_CURVE('',#351421,#351423,#351425,.T.); +#351421 = VERTEX_POINT('',#351422); +#351422 = CARTESIAN_POINT('',(138.7155,-149.5,1.51)); +#351423 = VERTEX_POINT('',#351424); +#351424 = CARTESIAN_POINT('',(138.7155,-149.5,1.55)); +#351425 = LINE('',#351426,#351427); +#351426 = CARTESIAN_POINT('',(138.7155,-149.5,1.51)); +#351427 = VECTOR('',#351428,1.); +#351428 = DIRECTION('',(0.,0.,1.)); +#351429 = ORIENTED_EDGE('',*,*,#351430,.T.); +#351430 = EDGE_CURVE('',#351423,#351423,#351431,.T.); +#351431 = CIRCLE('',#351432,0.7155); +#351432 = AXIS2_PLACEMENT_3D('',#351433,#351434,#351435); +#351433 = CARTESIAN_POINT('',(138.,-149.5,1.55)); +#351434 = DIRECTION('',(0.,0.,1.)); +#351435 = DIRECTION('',(1.,0.,-0.)); +#351436 = ORIENTED_EDGE('',*,*,#351420,.F.); +#351437 = ORIENTED_EDGE('',*,*,#351438,.F.); +#351438 = EDGE_CURVE('',#351421,#351421,#351439,.T.); +#351439 = CIRCLE('',#351440,0.7155); +#351440 = AXIS2_PLACEMENT_3D('',#351441,#351442,#351443); +#351441 = CARTESIAN_POINT('',(138.,-149.5,1.51)); +#351442 = DIRECTION('',(0.,0.,1.)); +#351443 = DIRECTION('',(1.,0.,-0.)); +#351444 = CYLINDRICAL_SURFACE('',#351445,0.7155); +#351445 = AXIS2_PLACEMENT_3D('',#351446,#351447,#351448); +#351446 = CARTESIAN_POINT('',(138.,-149.5,1.51)); +#351447 = DIRECTION('',(-0.,-0.,-1.)); +#351448 = DIRECTION('',(1.,0.,-0.)); +#351449 = ADVANCED_FACE('',(#351450,#351453),#351464,.F.); +#351450 = FACE_BOUND('',#351451,.F.); +#351451 = EDGE_LOOP('',(#351452)); +#351452 = ORIENTED_EDGE('',*,*,#351438,.T.); +#351453 = FACE_BOUND('',#351454,.F.); +#351454 = EDGE_LOOP('',(#351455)); +#351455 = ORIENTED_EDGE('',*,*,#351456,.T.); +#351456 = EDGE_CURVE('',#351457,#351457,#351459,.T.); +#351457 = VERTEX_POINT('',#351458); +#351458 = CARTESIAN_POINT('',(138.,-149.935,1.51)); +#351459 = CIRCLE('',#351460,0.435); +#351460 = AXIS2_PLACEMENT_3D('',#351461,#351462,#351463); +#351461 = CARTESIAN_POINT('',(138.,-149.5,1.51)); +#351462 = DIRECTION('',(-0.,0.,-1.)); +#351463 = DIRECTION('',(-0.,-1.,0.)); +#351464 = PLANE('',#351465); +#351465 = AXIS2_PLACEMENT_3D('',#351466,#351467,#351468); +#351466 = CARTESIAN_POINT('',(0.,0.,1.51)); +#351467 = DIRECTION('',(0.,0.,1.)); +#351468 = DIRECTION('',(1.,0.,-0.)); +#351469 = ADVANCED_FACE('',(#351470,#351473),#351484,.T.); +#351470 = FACE_BOUND('',#351471,.T.); +#351471 = EDGE_LOOP('',(#351472)); +#351472 = ORIENTED_EDGE('',*,*,#351430,.T.); +#351473 = FACE_BOUND('',#351474,.T.); +#351474 = EDGE_LOOP('',(#351475)); +#351475 = ORIENTED_EDGE('',*,*,#351476,.T.); +#351476 = EDGE_CURVE('',#351477,#351477,#351479,.T.); +#351477 = VERTEX_POINT('',#351478); +#351478 = CARTESIAN_POINT('',(138.,-149.935,1.55)); +#351479 = CIRCLE('',#351480,0.435); +#351480 = AXIS2_PLACEMENT_3D('',#351481,#351482,#351483); +#351481 = CARTESIAN_POINT('',(138.,-149.5,1.55)); +#351482 = DIRECTION('',(-0.,0.,-1.)); +#351483 = DIRECTION('',(-0.,-1.,0.)); +#351484 = PLANE('',#351485); +#351485 = AXIS2_PLACEMENT_3D('',#351486,#351487,#351488); +#351486 = CARTESIAN_POINT('',(0.,0.,1.55)); +#351487 = DIRECTION('',(0.,0.,1.)); +#351488 = DIRECTION('',(1.,0.,-0.)); +#351489 = ADVANCED_FACE('',(#351490),#351501,.F.); +#351490 = FACE_BOUND('',#351491,.T.); +#351491 = EDGE_LOOP('',(#351492,#351493,#351499,#351500)); +#351492 = ORIENTED_EDGE('',*,*,#351456,.T.); +#351493 = ORIENTED_EDGE('',*,*,#351494,.T.); +#351494 = EDGE_CURVE('',#351457,#351477,#351495,.T.); +#351495 = LINE('',#351496,#351497); +#351496 = CARTESIAN_POINT('',(138.,-149.935,-4.6E-02)); +#351497 = VECTOR('',#351498,1.); +#351498 = DIRECTION('',(0.,0.,1.)); +#351499 = ORIENTED_EDGE('',*,*,#351476,.F.); +#351500 = ORIENTED_EDGE('',*,*,#351494,.F.); +#351501 = CYLINDRICAL_SURFACE('',#351502,0.435); +#351502 = AXIS2_PLACEMENT_3D('',#351503,#351504,#351505); +#351503 = CARTESIAN_POINT('',(138.,-149.5,-4.6E-02)); +#351504 = DIRECTION('',(-0.,-0.,-1.)); +#351505 = DIRECTION('',(-0.,-1.,0.)); +#351506 = MANIFOLD_SOLID_BREP('',#351507); +#351507 = CLOSED_SHELL('',(#351508,#351541,#351561,#351581)); +#351508 = ADVANCED_FACE('',(#351509),#351536,.T.); +#351509 = FACE_BOUND('',#351510,.T.); +#351510 = EDGE_LOOP('',(#351511,#351521,#351528,#351529)); +#351511 = ORIENTED_EDGE('',*,*,#351512,.T.); +#351512 = EDGE_CURVE('',#351513,#351515,#351517,.T.); +#351513 = VERTEX_POINT('',#351514); +#351514 = CARTESIAN_POINT('',(138.7155,-149.5,0.)); +#351515 = VERTEX_POINT('',#351516); +#351516 = CARTESIAN_POINT('',(138.7155,-149.5,-4.E-02)); +#351517 = LINE('',#351518,#351519); +#351518 = CARTESIAN_POINT('',(138.7155,-149.5,0.)); +#351519 = VECTOR('',#351520,1.); +#351520 = DIRECTION('',(0.,0.,-1.)); +#351521 = ORIENTED_EDGE('',*,*,#351522,.T.); +#351522 = EDGE_CURVE('',#351515,#351515,#351523,.T.); +#351523 = CIRCLE('',#351524,0.7155); +#351524 = AXIS2_PLACEMENT_3D('',#351525,#351526,#351527); +#351525 = CARTESIAN_POINT('',(138.,-149.5,-4.E-02)); +#351526 = DIRECTION('',(0.,0.,1.)); +#351527 = DIRECTION('',(1.,0.,-0.)); +#351528 = ORIENTED_EDGE('',*,*,#351512,.F.); +#351529 = ORIENTED_EDGE('',*,*,#351530,.F.); +#351530 = EDGE_CURVE('',#351513,#351513,#351531,.T.); +#351531 = CIRCLE('',#351532,0.7155); +#351532 = AXIS2_PLACEMENT_3D('',#351533,#351534,#351535); +#351533 = CARTESIAN_POINT('',(138.,-149.5,0.)); +#351534 = DIRECTION('',(0.,0.,1.)); +#351535 = DIRECTION('',(1.,0.,-0.)); +#351536 = CYLINDRICAL_SURFACE('',#351537,0.7155); +#351537 = AXIS2_PLACEMENT_3D('',#351538,#351539,#351540); +#351538 = CARTESIAN_POINT('',(138.,-149.5,0.)); +#351539 = DIRECTION('',(0.,0.,1.)); +#351540 = DIRECTION('',(1.,0.,-0.)); +#351541 = ADVANCED_FACE('',(#351542,#351545),#351556,.F.); +#351542 = FACE_BOUND('',#351543,.F.); +#351543 = EDGE_LOOP('',(#351544)); +#351544 = ORIENTED_EDGE('',*,*,#351530,.F.); +#351545 = FACE_BOUND('',#351546,.F.); +#351546 = EDGE_LOOP('',(#351547)); +#351547 = ORIENTED_EDGE('',*,*,#351548,.F.); +#351548 = EDGE_CURVE('',#351549,#351549,#351551,.T.); +#351549 = VERTEX_POINT('',#351550); +#351550 = CARTESIAN_POINT('',(138.,-149.935,0.)); +#351551 = CIRCLE('',#351552,0.435); +#351552 = AXIS2_PLACEMENT_3D('',#351553,#351554,#351555); +#351553 = CARTESIAN_POINT('',(138.,-149.5,0.)); +#351554 = DIRECTION('',(-0.,0.,-1.)); +#351555 = DIRECTION('',(-0.,-1.,0.)); +#351556 = PLANE('',#351557); +#351557 = AXIS2_PLACEMENT_3D('',#351558,#351559,#351560); +#351558 = CARTESIAN_POINT('',(0.,0.,0.)); +#351559 = DIRECTION('',(-0.,-0.,-1.)); +#351560 = DIRECTION('',(-1.,0.,0.)); +#351561 = ADVANCED_FACE('',(#351562,#351565),#351576,.T.); +#351562 = FACE_BOUND('',#351563,.T.); +#351563 = EDGE_LOOP('',(#351564)); +#351564 = ORIENTED_EDGE('',*,*,#351522,.F.); +#351565 = FACE_BOUND('',#351566,.T.); +#351566 = EDGE_LOOP('',(#351567)); +#351567 = ORIENTED_EDGE('',*,*,#351568,.F.); +#351568 = EDGE_CURVE('',#351569,#351569,#351571,.T.); +#351569 = VERTEX_POINT('',#351570); +#351570 = CARTESIAN_POINT('',(138.,-149.935,-4.E-02)); +#351571 = CIRCLE('',#351572,0.435); +#351572 = AXIS2_PLACEMENT_3D('',#351573,#351574,#351575); +#351573 = CARTESIAN_POINT('',(138.,-149.5,-4.E-02)); +#351574 = DIRECTION('',(-0.,0.,-1.)); +#351575 = DIRECTION('',(-0.,-1.,0.)); +#351576 = PLANE('',#351577); +#351577 = AXIS2_PLACEMENT_3D('',#351578,#351579,#351580); +#351578 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#351579 = DIRECTION('',(-0.,-0.,-1.)); +#351580 = DIRECTION('',(-1.,0.,0.)); +#351581 = ADVANCED_FACE('',(#351582),#351593,.F.); +#351582 = FACE_BOUND('',#351583,.T.); +#351583 = EDGE_LOOP('',(#351584,#351585,#351591,#351592)); +#351584 = ORIENTED_EDGE('',*,*,#351568,.T.); +#351585 = ORIENTED_EDGE('',*,*,#351586,.T.); +#351586 = EDGE_CURVE('',#351569,#351549,#351587,.T.); +#351587 = LINE('',#351588,#351589); +#351588 = CARTESIAN_POINT('',(138.,-149.935,-4.6E-02)); +#351589 = VECTOR('',#351590,1.); +#351590 = DIRECTION('',(0.,0.,1.)); +#351591 = ORIENTED_EDGE('',*,*,#351548,.F.); +#351592 = ORIENTED_EDGE('',*,*,#351586,.F.); +#351593 = CYLINDRICAL_SURFACE('',#351594,0.435); +#351594 = AXIS2_PLACEMENT_3D('',#351595,#351596,#351597); +#351595 = CARTESIAN_POINT('',(138.,-149.5,-4.6E-02)); +#351596 = DIRECTION('',(-0.,-0.,-1.)); +#351597 = DIRECTION('',(-0.,-1.,0.)); +#351598 = MANIFOLD_SOLID_BREP('',#351599); +#351599 = CLOSED_SHELL('',(#351600,#351633,#351653,#351673)); +#351600 = ADVANCED_FACE('',(#351601),#351628,.T.); +#351601 = FACE_BOUND('',#351602,.F.); +#351602 = EDGE_LOOP('',(#351603,#351613,#351620,#351621)); +#351603 = ORIENTED_EDGE('',*,*,#351604,.T.); +#351604 = EDGE_CURVE('',#351605,#351607,#351609,.T.); +#351605 = VERTEX_POINT('',#351606); +#351606 = CARTESIAN_POINT('',(138.,-149.96,-4.E-02)); +#351607 = VERTEX_POINT('',#351608); +#351608 = CARTESIAN_POINT('',(138.,-149.96,1.55)); +#351609 = LINE('',#351610,#351611); +#351610 = CARTESIAN_POINT('',(138.,-149.96,-4.E-02)); +#351611 = VECTOR('',#351612,1.); +#351612 = DIRECTION('',(0.,0.,1.)); +#351613 = ORIENTED_EDGE('',*,*,#351614,.T.); +#351614 = EDGE_CURVE('',#351607,#351607,#351615,.T.); +#351615 = CIRCLE('',#351616,0.46); +#351616 = AXIS2_PLACEMENT_3D('',#351617,#351618,#351619); +#351617 = CARTESIAN_POINT('',(138.,-149.5,1.55)); +#351618 = DIRECTION('',(0.,0.,1.)); +#351619 = DIRECTION('',(-0.,-1.,0.)); +#351620 = ORIENTED_EDGE('',*,*,#351604,.F.); +#351621 = ORIENTED_EDGE('',*,*,#351622,.F.); +#351622 = EDGE_CURVE('',#351605,#351605,#351623,.T.); +#351623 = CIRCLE('',#351624,0.46); +#351624 = AXIS2_PLACEMENT_3D('',#351625,#351626,#351627); +#351625 = CARTESIAN_POINT('',(138.,-149.5,-4.E-02)); +#351626 = DIRECTION('',(0.,0.,1.)); +#351627 = DIRECTION('',(-0.,-1.,0.)); +#351628 = CYLINDRICAL_SURFACE('',#351629,0.46); +#351629 = AXIS2_PLACEMENT_3D('',#351630,#351631,#351632); +#351630 = CARTESIAN_POINT('',(138.,-149.5,-4.E-02)); +#351631 = DIRECTION('',(-0.,-0.,-1.)); +#351632 = DIRECTION('',(-0.,-1.,0.)); +#351633 = ADVANCED_FACE('',(#351634,#351637),#351648,.F.); +#351634 = FACE_BOUND('',#351635,.F.); +#351635 = EDGE_LOOP('',(#351636)); +#351636 = ORIENTED_EDGE('',*,*,#351622,.T.); +#351637 = FACE_BOUND('',#351638,.F.); +#351638 = EDGE_LOOP('',(#351639)); +#351639 = ORIENTED_EDGE('',*,*,#351640,.T.); +#351640 = EDGE_CURVE('',#351641,#351641,#351643,.T.); +#351641 = VERTEX_POINT('',#351642); +#351642 = CARTESIAN_POINT('',(138.,-149.935,-4.E-02)); +#351643 = CIRCLE('',#351644,0.435); +#351644 = AXIS2_PLACEMENT_3D('',#351645,#351646,#351647); +#351645 = CARTESIAN_POINT('',(138.,-149.5,-4.E-02)); +#351646 = DIRECTION('',(-0.,0.,-1.)); +#351647 = DIRECTION('',(-0.,-1.,0.)); +#351648 = PLANE('',#351649); +#351649 = AXIS2_PLACEMENT_3D('',#351650,#351651,#351652); +#351650 = CARTESIAN_POINT('',(138.,-149.96,-4.E-02)); +#351651 = DIRECTION('',(0.,0.,1.)); +#351652 = DIRECTION('',(1.,0.,-0.)); +#351653 = ADVANCED_FACE('',(#351654,#351657),#351668,.T.); +#351654 = FACE_BOUND('',#351655,.T.); +#351655 = EDGE_LOOP('',(#351656)); +#351656 = ORIENTED_EDGE('',*,*,#351614,.T.); +#351657 = FACE_BOUND('',#351658,.T.); +#351658 = EDGE_LOOP('',(#351659)); +#351659 = ORIENTED_EDGE('',*,*,#351660,.T.); +#351660 = EDGE_CURVE('',#351661,#351661,#351663,.T.); +#351661 = VERTEX_POINT('',#351662); +#351662 = CARTESIAN_POINT('',(138.,-149.935,1.55)); +#351663 = CIRCLE('',#351664,0.435); +#351664 = AXIS2_PLACEMENT_3D('',#351665,#351666,#351667); +#351665 = CARTESIAN_POINT('',(138.,-149.5,1.55)); +#351666 = DIRECTION('',(-0.,0.,-1.)); +#351667 = DIRECTION('',(-0.,-1.,0.)); +#351668 = PLANE('',#351669); +#351669 = AXIS2_PLACEMENT_3D('',#351670,#351671,#351672); +#351670 = CARTESIAN_POINT('',(138.,-149.96,1.55)); +#351671 = DIRECTION('',(0.,0.,1.)); +#351672 = DIRECTION('',(1.,0.,-0.)); +#351673 = ADVANCED_FACE('',(#351674),#351685,.F.); +#351674 = FACE_BOUND('',#351675,.T.); +#351675 = EDGE_LOOP('',(#351676,#351677,#351683,#351684)); +#351676 = ORIENTED_EDGE('',*,*,#351640,.T.); +#351677 = ORIENTED_EDGE('',*,*,#351678,.T.); +#351678 = EDGE_CURVE('',#351641,#351661,#351679,.T.); +#351679 = LINE('',#351680,#351681); +#351680 = CARTESIAN_POINT('',(138.,-149.935,-4.6E-02)); +#351681 = VECTOR('',#351682,1.); +#351682 = DIRECTION('',(0.,0.,1.)); +#351683 = ORIENTED_EDGE('',*,*,#351660,.F.); +#351684 = ORIENTED_EDGE('',*,*,#351678,.F.); +#351685 = CYLINDRICAL_SURFACE('',#351686,0.435); +#351686 = AXIS2_PLACEMENT_3D('',#351687,#351688,#351689); +#351687 = CARTESIAN_POINT('',(138.,-149.5,-4.6E-02)); +#351688 = DIRECTION('',(-0.,-0.,-1.)); +#351689 = DIRECTION('',(-0.,-1.,0.)); +#351690 = MANIFOLD_SOLID_BREP('',#351691); +#351691 = CLOSED_SHELL('',(#351692,#351732,#351763,#351794,#351816, + #351828)); +#351692 = ADVANCED_FACE('',(#351693),#351727,.T.); +#351693 = FACE_BOUND('',#351694,.T.); +#351694 = EDGE_LOOP('',(#351695,#351705,#351713,#351721)); +#351695 = ORIENTED_EDGE('',*,*,#351696,.T.); +#351696 = EDGE_CURVE('',#351697,#351699,#351701,.T.); +#351697 = VERTEX_POINT('',#351698); +#351698 = CARTESIAN_POINT('',(134.375,-83.16,1.51)); +#351699 = VERTEX_POINT('',#351700); +#351700 = CARTESIAN_POINT('',(134.375,-83.16,1.55)); +#351701 = LINE('',#351702,#351703); +#351702 = CARTESIAN_POINT('',(134.375,-83.16,1.51)); +#351703 = VECTOR('',#351704,1.); +#351704 = DIRECTION('',(0.,0.,1.)); +#351705 = ORIENTED_EDGE('',*,*,#351706,.T.); +#351706 = EDGE_CURVE('',#351699,#351707,#351709,.T.); +#351707 = VERTEX_POINT('',#351708); +#351708 = CARTESIAN_POINT('',(134.375,-81.66,1.55)); +#351709 = LINE('',#351710,#351711); +#351710 = CARTESIAN_POINT('',(134.375,-83.16,1.55)); +#351711 = VECTOR('',#351712,1.); +#351712 = DIRECTION('',(0.,1.,0.)); +#351713 = ORIENTED_EDGE('',*,*,#351714,.F.); +#351714 = EDGE_CURVE('',#351715,#351707,#351717,.T.); +#351715 = VERTEX_POINT('',#351716); +#351716 = CARTESIAN_POINT('',(134.375,-81.66,1.51)); +#351717 = LINE('',#351718,#351719); +#351718 = CARTESIAN_POINT('',(134.375,-81.66,1.51)); +#351719 = VECTOR('',#351720,1.); +#351720 = DIRECTION('',(0.,0.,1.)); +#351721 = ORIENTED_EDGE('',*,*,#351722,.F.); +#351722 = EDGE_CURVE('',#351697,#351715,#351723,.T.); +#351723 = LINE('',#351724,#351725); +#351724 = CARTESIAN_POINT('',(134.375,-83.16,1.51)); +#351725 = VECTOR('',#351726,1.); +#351726 = DIRECTION('',(0.,1.,0.)); +#351727 = PLANE('',#351728); +#351728 = AXIS2_PLACEMENT_3D('',#351729,#351730,#351731); +#351729 = CARTESIAN_POINT('',(134.375,-83.16,1.51)); +#351730 = DIRECTION('',(-1.,0.,0.)); +#351731 = DIRECTION('',(0.,1.,0.)); +#351732 = ADVANCED_FACE('',(#351733),#351758,.T.); +#351733 = FACE_BOUND('',#351734,.T.); +#351734 = EDGE_LOOP('',(#351735,#351736,#351744,#351752)); +#351735 = ORIENTED_EDGE('',*,*,#351714,.T.); +#351736 = ORIENTED_EDGE('',*,*,#351737,.T.); +#351737 = EDGE_CURVE('',#351707,#351738,#351740,.T.); +#351738 = VERTEX_POINT('',#351739); +#351739 = CARTESIAN_POINT('',(135.275,-81.66,1.55)); +#351740 = LINE('',#351741,#351742); +#351741 = CARTESIAN_POINT('',(134.375,-81.66,1.55)); +#351742 = VECTOR('',#351743,1.); +#351743 = DIRECTION('',(1.,0.,0.)); +#351744 = ORIENTED_EDGE('',*,*,#351745,.F.); +#351745 = EDGE_CURVE('',#351746,#351738,#351748,.T.); +#351746 = VERTEX_POINT('',#351747); +#351747 = CARTESIAN_POINT('',(135.275,-81.66,1.51)); +#351748 = LINE('',#351749,#351750); +#351749 = CARTESIAN_POINT('',(135.275,-81.66,1.51)); +#351750 = VECTOR('',#351751,1.); +#351751 = DIRECTION('',(0.,0.,1.)); +#351752 = ORIENTED_EDGE('',*,*,#351753,.F.); +#351753 = EDGE_CURVE('',#351715,#351746,#351754,.T.); +#351754 = LINE('',#351755,#351756); +#351755 = CARTESIAN_POINT('',(134.375,-81.66,1.51)); +#351756 = VECTOR('',#351757,1.); +#351757 = DIRECTION('',(1.,0.,0.)); +#351758 = PLANE('',#351759); +#351759 = AXIS2_PLACEMENT_3D('',#351760,#351761,#351762); +#351760 = CARTESIAN_POINT('',(134.375,-81.66,1.51)); +#351761 = DIRECTION('',(0.,1.,0.)); +#351762 = DIRECTION('',(1.,0.,0.)); +#351763 = ADVANCED_FACE('',(#351764),#351789,.T.); +#351764 = FACE_BOUND('',#351765,.T.); +#351765 = EDGE_LOOP('',(#351766,#351767,#351775,#351783)); +#351766 = ORIENTED_EDGE('',*,*,#351745,.T.); +#351767 = ORIENTED_EDGE('',*,*,#351768,.T.); +#351768 = EDGE_CURVE('',#351738,#351769,#351771,.T.); +#351769 = VERTEX_POINT('',#351770); +#351770 = CARTESIAN_POINT('',(135.275,-83.16,1.55)); +#351771 = LINE('',#351772,#351773); +#351772 = CARTESIAN_POINT('',(135.275,-81.66,1.55)); +#351773 = VECTOR('',#351774,1.); +#351774 = DIRECTION('',(0.,-1.,0.)); +#351775 = ORIENTED_EDGE('',*,*,#351776,.F.); +#351776 = EDGE_CURVE('',#351777,#351769,#351779,.T.); +#351777 = VERTEX_POINT('',#351778); +#351778 = CARTESIAN_POINT('',(135.275,-83.16,1.51)); +#351779 = LINE('',#351780,#351781); +#351780 = CARTESIAN_POINT('',(135.275,-83.16,1.51)); +#351781 = VECTOR('',#351782,1.); +#351782 = DIRECTION('',(0.,0.,1.)); +#351783 = ORIENTED_EDGE('',*,*,#351784,.F.); +#351784 = EDGE_CURVE('',#351746,#351777,#351785,.T.); +#351785 = LINE('',#351786,#351787); +#351786 = CARTESIAN_POINT('',(135.275,-81.66,1.51)); +#351787 = VECTOR('',#351788,1.); +#351788 = DIRECTION('',(0.,-1.,0.)); +#351789 = PLANE('',#351790); +#351790 = AXIS2_PLACEMENT_3D('',#351791,#351792,#351793); +#351791 = CARTESIAN_POINT('',(135.275,-81.66,1.51)); +#351792 = DIRECTION('',(1.,0.,-0.)); +#351793 = DIRECTION('',(0.,-1.,0.)); +#351794 = ADVANCED_FACE('',(#351795),#351811,.T.); +#351795 = FACE_BOUND('',#351796,.T.); +#351796 = EDGE_LOOP('',(#351797,#351798,#351804,#351805)); +#351797 = ORIENTED_EDGE('',*,*,#351776,.T.); +#351798 = ORIENTED_EDGE('',*,*,#351799,.T.); +#351799 = EDGE_CURVE('',#351769,#351699,#351800,.T.); +#351800 = LINE('',#351801,#351802); +#351801 = CARTESIAN_POINT('',(135.275,-83.16,1.55)); +#351802 = VECTOR('',#351803,1.); +#351803 = DIRECTION('',(-1.,0.,0.)); +#351804 = ORIENTED_EDGE('',*,*,#351696,.F.); +#351805 = ORIENTED_EDGE('',*,*,#351806,.F.); +#351806 = EDGE_CURVE('',#351777,#351697,#351807,.T.); +#351807 = LINE('',#351808,#351809); +#351808 = CARTESIAN_POINT('',(135.275,-83.16,1.51)); +#351809 = VECTOR('',#351810,1.); +#351810 = DIRECTION('',(-1.,0.,0.)); +#351811 = PLANE('',#351812); +#351812 = AXIS2_PLACEMENT_3D('',#351813,#351814,#351815); +#351813 = CARTESIAN_POINT('',(135.275,-83.16,1.51)); +#351814 = DIRECTION('',(0.,-1.,0.)); +#351815 = DIRECTION('',(-1.,0.,0.)); +#351816 = ADVANCED_FACE('',(#351817),#351823,.F.); +#351817 = FACE_BOUND('',#351818,.T.); +#351818 = EDGE_LOOP('',(#351819,#351820,#351821,#351822)); +#351819 = ORIENTED_EDGE('',*,*,#351722,.T.); +#351820 = ORIENTED_EDGE('',*,*,#351753,.T.); +#351821 = ORIENTED_EDGE('',*,*,#351784,.T.); +#351822 = ORIENTED_EDGE('',*,*,#351806,.T.); +#351823 = PLANE('',#351824); +#351824 = AXIS2_PLACEMENT_3D('',#351825,#351826,#351827); +#351825 = CARTESIAN_POINT('',(0.,0.,1.51)); +#351826 = DIRECTION('',(0.,0.,1.)); +#351827 = DIRECTION('',(1.,0.,-0.)); +#351828 = ADVANCED_FACE('',(#351829),#351835,.T.); +#351829 = FACE_BOUND('',#351830,.F.); +#351830 = EDGE_LOOP('',(#351831,#351832,#351833,#351834)); +#351831 = ORIENTED_EDGE('',*,*,#351706,.T.); +#351832 = ORIENTED_EDGE('',*,*,#351737,.T.); +#351833 = ORIENTED_EDGE('',*,*,#351768,.T.); +#351834 = ORIENTED_EDGE('',*,*,#351799,.T.); +#351835 = PLANE('',#351836); +#351836 = AXIS2_PLACEMENT_3D('',#351837,#351838,#351839); +#351837 = CARTESIAN_POINT('',(0.,0.,1.55)); +#351838 = DIRECTION('',(0.,0.,1.)); +#351839 = DIRECTION('',(1.,0.,-0.)); +#351840 = MANIFOLD_SOLID_BREP('',#351841); +#351841 = CLOSED_SHELL('',(#351842,#351882,#351913,#351944,#351966, + #351978)); +#351842 = ADVANCED_FACE('',(#351843),#351877,.T.); +#351843 = FACE_BOUND('',#351844,.T.); +#351844 = EDGE_LOOP('',(#351845,#351855,#351863,#351871)); +#351845 = ORIENTED_EDGE('',*,*,#351846,.T.); +#351846 = EDGE_CURVE('',#351847,#351849,#351851,.T.); +#351847 = VERTEX_POINT('',#351848); +#351848 = CARTESIAN_POINT('',(146.,-66.37,1.51)); +#351849 = VERTEX_POINT('',#351850); +#351850 = CARTESIAN_POINT('',(146.,-66.37,1.55)); +#351851 = LINE('',#351852,#351853); +#351852 = CARTESIAN_POINT('',(146.,-66.37,1.51)); +#351853 = VECTOR('',#351854,1.); +#351854 = DIRECTION('',(0.,0.,1.)); +#351855 = ORIENTED_EDGE('',*,*,#351856,.T.); +#351856 = EDGE_CURVE('',#351849,#351857,#351859,.T.); +#351857 = VERTEX_POINT('',#351858); +#351858 = CARTESIAN_POINT('',(146.,-65.47,1.55)); +#351859 = LINE('',#351860,#351861); +#351860 = CARTESIAN_POINT('',(146.,-66.37,1.55)); +#351861 = VECTOR('',#351862,1.); +#351862 = DIRECTION('',(0.,1.,0.)); +#351863 = ORIENTED_EDGE('',*,*,#351864,.F.); +#351864 = EDGE_CURVE('',#351865,#351857,#351867,.T.); +#351865 = VERTEX_POINT('',#351866); +#351866 = CARTESIAN_POINT('',(146.,-65.47,1.51)); +#351867 = LINE('',#351868,#351869); +#351868 = CARTESIAN_POINT('',(146.,-65.47,1.51)); +#351869 = VECTOR('',#351870,1.); +#351870 = DIRECTION('',(0.,0.,1.)); +#351871 = ORIENTED_EDGE('',*,*,#351872,.F.); +#351872 = EDGE_CURVE('',#351847,#351865,#351873,.T.); +#351873 = LINE('',#351874,#351875); +#351874 = CARTESIAN_POINT('',(146.,-66.37,1.51)); +#351875 = VECTOR('',#351876,1.); +#351876 = DIRECTION('',(0.,1.,0.)); +#351877 = PLANE('',#351878); +#351878 = AXIS2_PLACEMENT_3D('',#351879,#351880,#351881); +#351879 = CARTESIAN_POINT('',(146.,-66.37,1.51)); +#351880 = DIRECTION('',(-1.,0.,0.)); +#351881 = DIRECTION('',(0.,1.,0.)); +#351882 = ADVANCED_FACE('',(#351883),#351908,.T.); +#351883 = FACE_BOUND('',#351884,.T.); +#351884 = EDGE_LOOP('',(#351885,#351886,#351894,#351902)); +#351885 = ORIENTED_EDGE('',*,*,#351864,.T.); +#351886 = ORIENTED_EDGE('',*,*,#351887,.T.); +#351887 = EDGE_CURVE('',#351857,#351888,#351890,.T.); +#351888 = VERTEX_POINT('',#351889); +#351889 = CARTESIAN_POINT('',(147.5,-65.47,1.55)); +#351890 = LINE('',#351891,#351892); +#351891 = CARTESIAN_POINT('',(146.,-65.47,1.55)); +#351892 = VECTOR('',#351893,1.); +#351893 = DIRECTION('',(1.,0.,0.)); +#351894 = ORIENTED_EDGE('',*,*,#351895,.F.); +#351895 = EDGE_CURVE('',#351896,#351888,#351898,.T.); +#351896 = VERTEX_POINT('',#351897); +#351897 = CARTESIAN_POINT('',(147.5,-65.47,1.51)); +#351898 = LINE('',#351899,#351900); +#351899 = CARTESIAN_POINT('',(147.5,-65.47,1.51)); +#351900 = VECTOR('',#351901,1.); +#351901 = DIRECTION('',(0.,0.,1.)); +#351902 = ORIENTED_EDGE('',*,*,#351903,.F.); +#351903 = EDGE_CURVE('',#351865,#351896,#351904,.T.); +#351904 = LINE('',#351905,#351906); +#351905 = CARTESIAN_POINT('',(146.,-65.47,1.51)); +#351906 = VECTOR('',#351907,1.); +#351907 = DIRECTION('',(1.,0.,0.)); +#351908 = PLANE('',#351909); +#351909 = AXIS2_PLACEMENT_3D('',#351910,#351911,#351912); +#351910 = CARTESIAN_POINT('',(146.,-65.47,1.51)); +#351911 = DIRECTION('',(0.,1.,0.)); +#351912 = DIRECTION('',(1.,0.,0.)); +#351913 = ADVANCED_FACE('',(#351914),#351939,.T.); +#351914 = FACE_BOUND('',#351915,.T.); +#351915 = EDGE_LOOP('',(#351916,#351917,#351925,#351933)); +#351916 = ORIENTED_EDGE('',*,*,#351895,.T.); +#351917 = ORIENTED_EDGE('',*,*,#351918,.T.); +#351918 = EDGE_CURVE('',#351888,#351919,#351921,.T.); +#351919 = VERTEX_POINT('',#351920); +#351920 = CARTESIAN_POINT('',(147.5,-66.37,1.55)); +#351921 = LINE('',#351922,#351923); +#351922 = CARTESIAN_POINT('',(147.5,-65.47,1.55)); +#351923 = VECTOR('',#351924,1.); +#351924 = DIRECTION('',(0.,-1.,0.)); +#351925 = ORIENTED_EDGE('',*,*,#351926,.F.); +#351926 = EDGE_CURVE('',#351927,#351919,#351929,.T.); +#351927 = VERTEX_POINT('',#351928); +#351928 = CARTESIAN_POINT('',(147.5,-66.37,1.51)); +#351929 = LINE('',#351930,#351931); +#351930 = CARTESIAN_POINT('',(147.5,-66.37,1.51)); +#351931 = VECTOR('',#351932,1.); +#351932 = DIRECTION('',(0.,0.,1.)); +#351933 = ORIENTED_EDGE('',*,*,#351934,.F.); +#351934 = EDGE_CURVE('',#351896,#351927,#351935,.T.); +#351935 = LINE('',#351936,#351937); +#351936 = CARTESIAN_POINT('',(147.5,-65.47,1.51)); +#351937 = VECTOR('',#351938,1.); +#351938 = DIRECTION('',(0.,-1.,0.)); +#351939 = PLANE('',#351940); +#351940 = AXIS2_PLACEMENT_3D('',#351941,#351942,#351943); +#351941 = CARTESIAN_POINT('',(147.5,-65.47,1.51)); +#351942 = DIRECTION('',(1.,0.,-0.)); +#351943 = DIRECTION('',(0.,-1.,0.)); +#351944 = ADVANCED_FACE('',(#351945),#351961,.T.); +#351945 = FACE_BOUND('',#351946,.T.); +#351946 = EDGE_LOOP('',(#351947,#351948,#351954,#351955)); +#351947 = ORIENTED_EDGE('',*,*,#351926,.T.); +#351948 = ORIENTED_EDGE('',*,*,#351949,.T.); +#351949 = EDGE_CURVE('',#351919,#351849,#351950,.T.); +#351950 = LINE('',#351951,#351952); +#351951 = CARTESIAN_POINT('',(147.5,-66.37,1.55)); +#351952 = VECTOR('',#351953,1.); +#351953 = DIRECTION('',(-1.,0.,0.)); +#351954 = ORIENTED_EDGE('',*,*,#351846,.F.); +#351955 = ORIENTED_EDGE('',*,*,#351956,.F.); +#351956 = EDGE_CURVE('',#351927,#351847,#351957,.T.); +#351957 = LINE('',#351958,#351959); +#351958 = CARTESIAN_POINT('',(147.5,-66.37,1.51)); +#351959 = VECTOR('',#351960,1.); +#351960 = DIRECTION('',(-1.,0.,0.)); +#351961 = PLANE('',#351962); +#351962 = AXIS2_PLACEMENT_3D('',#351963,#351964,#351965); +#351963 = CARTESIAN_POINT('',(147.5,-66.37,1.51)); +#351964 = DIRECTION('',(0.,-1.,0.)); +#351965 = DIRECTION('',(-1.,0.,0.)); +#351966 = ADVANCED_FACE('',(#351967),#351973,.F.); +#351967 = FACE_BOUND('',#351968,.T.); +#351968 = EDGE_LOOP('',(#351969,#351970,#351971,#351972)); +#351969 = ORIENTED_EDGE('',*,*,#351872,.T.); +#351970 = ORIENTED_EDGE('',*,*,#351903,.T.); +#351971 = ORIENTED_EDGE('',*,*,#351934,.T.); +#351972 = ORIENTED_EDGE('',*,*,#351956,.T.); +#351973 = PLANE('',#351974); +#351974 = AXIS2_PLACEMENT_3D('',#351975,#351976,#351977); +#351975 = CARTESIAN_POINT('',(0.,0.,1.51)); +#351976 = DIRECTION('',(0.,0.,1.)); +#351977 = DIRECTION('',(1.,0.,-0.)); +#351978 = ADVANCED_FACE('',(#351979),#351985,.T.); +#351979 = FACE_BOUND('',#351980,.F.); +#351980 = EDGE_LOOP('',(#351981,#351982,#351983,#351984)); +#351981 = ORIENTED_EDGE('',*,*,#351856,.T.); +#351982 = ORIENTED_EDGE('',*,*,#351887,.T.); +#351983 = ORIENTED_EDGE('',*,*,#351918,.T.); +#351984 = ORIENTED_EDGE('',*,*,#351949,.T.); +#351985 = PLANE('',#351986); +#351986 = AXIS2_PLACEMENT_3D('',#351987,#351988,#351989); +#351987 = CARTESIAN_POINT('',(0.,0.,1.55)); +#351988 = DIRECTION('',(0.,0.,1.)); +#351989 = DIRECTION('',(1.,0.,-0.)); +#351990 = MANIFOLD_SOLID_BREP('',#351991); +#351991 = CLOSED_SHELL('',(#351992,#352034,#352065,#352098,#352129, + #352162,#352193,#352226,#352248,#352264)); +#351992 = ADVANCED_FACE('',(#351993),#352029,.T.); +#351993 = FACE_BOUND('',#351994,.F.); +#351994 = EDGE_LOOP('',(#351995,#352005,#352014,#352022)); +#351995 = ORIENTED_EDGE('',*,*,#351996,.T.); +#351996 = EDGE_CURVE('',#351997,#351999,#352001,.T.); +#351997 = VERTEX_POINT('',#351998); +#351998 = CARTESIAN_POINT('',(131.7,-118.552,0.)); +#351999 = VERTEX_POINT('',#352000); +#352000 = CARTESIAN_POINT('',(131.7,-118.552,-4.E-02)); +#352001 = LINE('',#352002,#352003); +#352002 = CARTESIAN_POINT('',(131.7,-118.552,0.)); +#352003 = VECTOR('',#352004,1.); +#352004 = DIRECTION('',(0.,0.,-1.)); +#352005 = ORIENTED_EDGE('',*,*,#352006,.T.); +#352006 = EDGE_CURVE('',#351999,#352007,#352009,.T.); +#352007 = VERTEX_POINT('',#352008); +#352008 = CARTESIAN_POINT('',(131.752,-118.5,-4.E-02)); +#352009 = CIRCLE('',#352010,5.199847263152E-02); +#352010 = AXIS2_PLACEMENT_3D('',#352011,#352012,#352013); +#352011 = CARTESIAN_POINT('',(131.7519984726,-118.5519984726,-4.E-02)); +#352012 = DIRECTION('',(0.,0.,-1.)); +#352013 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#352014 = ORIENTED_EDGE('',*,*,#352015,.F.); +#352015 = EDGE_CURVE('',#352016,#352007,#352018,.T.); +#352016 = VERTEX_POINT('',#352017); +#352017 = CARTESIAN_POINT('',(131.752,-118.5,0.)); +#352018 = LINE('',#352019,#352020); +#352019 = CARTESIAN_POINT('',(131.752,-118.5,0.)); +#352020 = VECTOR('',#352021,1.); +#352021 = DIRECTION('',(0.,0.,-1.)); +#352022 = ORIENTED_EDGE('',*,*,#352023,.F.); +#352023 = EDGE_CURVE('',#351997,#352016,#352024,.T.); +#352024 = CIRCLE('',#352025,5.199847263152E-02); +#352025 = AXIS2_PLACEMENT_3D('',#352026,#352027,#352028); +#352026 = CARTESIAN_POINT('',(131.7519984726,-118.5519984726,0.)); +#352027 = DIRECTION('',(0.,0.,-1.)); +#352028 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#352029 = CYLINDRICAL_SURFACE('',#352030,5.199847263152E-02); +#352030 = AXIS2_PLACEMENT_3D('',#352031,#352032,#352033); +#352031 = CARTESIAN_POINT('',(131.7519984726,-118.5519984726,0.)); +#352032 = DIRECTION('',(-0.,-0.,1.)); +#352033 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#352034 = ADVANCED_FACE('',(#352035),#352060,.F.); +#352035 = FACE_BOUND('',#352036,.F.); +#352036 = EDGE_LOOP('',(#352037,#352038,#352046,#352054)); +#352037 = ORIENTED_EDGE('',*,*,#352015,.T.); +#352038 = ORIENTED_EDGE('',*,*,#352039,.T.); +#352039 = EDGE_CURVE('',#352007,#352040,#352042,.T.); +#352040 = VERTEX_POINT('',#352041); +#352041 = CARTESIAN_POINT('',(132.148,-118.5,-4.E-02)); +#352042 = LINE('',#352043,#352044); +#352043 = CARTESIAN_POINT('',(131.752,-118.5,-4.E-02)); +#352044 = VECTOR('',#352045,1.); +#352045 = DIRECTION('',(1.,0.,0.)); +#352046 = ORIENTED_EDGE('',*,*,#352047,.F.); +#352047 = EDGE_CURVE('',#352048,#352040,#352050,.T.); +#352048 = VERTEX_POINT('',#352049); +#352049 = CARTESIAN_POINT('',(132.148,-118.5,0.)); +#352050 = LINE('',#352051,#352052); +#352051 = CARTESIAN_POINT('',(132.148,-118.5,0.)); +#352052 = VECTOR('',#352053,1.); +#352053 = DIRECTION('',(0.,0.,-1.)); +#352054 = ORIENTED_EDGE('',*,*,#352055,.F.); +#352055 = EDGE_CURVE('',#352016,#352048,#352056,.T.); +#352056 = LINE('',#352057,#352058); +#352057 = CARTESIAN_POINT('',(131.752,-118.5,0.)); +#352058 = VECTOR('',#352059,1.); +#352059 = DIRECTION('',(1.,0.,0.)); +#352060 = PLANE('',#352061); +#352061 = AXIS2_PLACEMENT_3D('',#352062,#352063,#352064); +#352062 = CARTESIAN_POINT('',(131.752,-118.5,0.)); +#352063 = DIRECTION('',(0.,-1.,0.)); +#352064 = DIRECTION('',(1.,0.,0.)); +#352065 = ADVANCED_FACE('',(#352066),#352093,.T.); +#352066 = FACE_BOUND('',#352067,.F.); +#352067 = EDGE_LOOP('',(#352068,#352069,#352078,#352086)); +#352068 = ORIENTED_EDGE('',*,*,#352047,.T.); +#352069 = ORIENTED_EDGE('',*,*,#352070,.T.); +#352070 = EDGE_CURVE('',#352040,#352071,#352073,.T.); +#352071 = VERTEX_POINT('',#352072); +#352072 = CARTESIAN_POINT('',(132.2,-118.552,-4.E-02)); +#352073 = CIRCLE('',#352074,5.199847263154E-02); +#352074 = AXIS2_PLACEMENT_3D('',#352075,#352076,#352077); +#352075 = CARTESIAN_POINT('',(132.14800152739,-118.5519984726,-4.E-02)); +#352076 = DIRECTION('',(0.,0.,-1.)); +#352077 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#352078 = ORIENTED_EDGE('',*,*,#352079,.F.); +#352079 = EDGE_CURVE('',#352080,#352071,#352082,.T.); +#352080 = VERTEX_POINT('',#352081); +#352081 = CARTESIAN_POINT('',(132.2,-118.552,0.)); +#352082 = LINE('',#352083,#352084); +#352083 = CARTESIAN_POINT('',(132.2,-118.552,0.)); +#352084 = VECTOR('',#352085,1.); +#352085 = DIRECTION('',(0.,0.,-1.)); +#352086 = ORIENTED_EDGE('',*,*,#352087,.F.); +#352087 = EDGE_CURVE('',#352048,#352080,#352088,.T.); +#352088 = CIRCLE('',#352089,5.199847263154E-02); +#352089 = AXIS2_PLACEMENT_3D('',#352090,#352091,#352092); +#352090 = CARTESIAN_POINT('',(132.14800152739,-118.5519984726,0.)); +#352091 = DIRECTION('',(0.,0.,-1.)); +#352092 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#352093 = CYLINDRICAL_SURFACE('',#352094,5.199847263154E-02); +#352094 = AXIS2_PLACEMENT_3D('',#352095,#352096,#352097); +#352095 = CARTESIAN_POINT('',(132.14800152739,-118.5519984726,0.)); +#352096 = DIRECTION('',(-0.,-0.,1.)); +#352097 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#352098 = ADVANCED_FACE('',(#352099),#352124,.F.); +#352099 = FACE_BOUND('',#352100,.F.); +#352100 = EDGE_LOOP('',(#352101,#352102,#352110,#352118)); +#352101 = ORIENTED_EDGE('',*,*,#352079,.T.); +#352102 = ORIENTED_EDGE('',*,*,#352103,.T.); +#352103 = EDGE_CURVE('',#352071,#352104,#352106,.T.); +#352104 = VERTEX_POINT('',#352105); +#352105 = CARTESIAN_POINT('',(132.2,-118.648,-4.E-02)); +#352106 = LINE('',#352107,#352108); +#352107 = CARTESIAN_POINT('',(132.2,-118.552,-4.E-02)); +#352108 = VECTOR('',#352109,1.); +#352109 = DIRECTION('',(0.,-1.,0.)); +#352110 = ORIENTED_EDGE('',*,*,#352111,.F.); +#352111 = EDGE_CURVE('',#352112,#352104,#352114,.T.); +#352112 = VERTEX_POINT('',#352113); +#352113 = CARTESIAN_POINT('',(132.2,-118.648,0.)); +#352114 = LINE('',#352115,#352116); +#352115 = CARTESIAN_POINT('',(132.2,-118.648,0.)); +#352116 = VECTOR('',#352117,1.); +#352117 = DIRECTION('',(0.,0.,-1.)); +#352118 = ORIENTED_EDGE('',*,*,#352119,.F.); +#352119 = EDGE_CURVE('',#352080,#352112,#352120,.T.); +#352120 = LINE('',#352121,#352122); +#352121 = CARTESIAN_POINT('',(132.2,-118.552,0.)); +#352122 = VECTOR('',#352123,1.); +#352123 = DIRECTION('',(0.,-1.,0.)); +#352124 = PLANE('',#352125); +#352125 = AXIS2_PLACEMENT_3D('',#352126,#352127,#352128); +#352126 = CARTESIAN_POINT('',(132.2,-118.552,0.)); +#352127 = DIRECTION('',(-1.,-0.,-0.)); +#352128 = DIRECTION('',(0.,-1.,0.)); +#352129 = ADVANCED_FACE('',(#352130),#352157,.T.); +#352130 = FACE_BOUND('',#352131,.F.); +#352131 = EDGE_LOOP('',(#352132,#352133,#352142,#352150)); +#352132 = ORIENTED_EDGE('',*,*,#352111,.T.); +#352133 = ORIENTED_EDGE('',*,*,#352134,.T.); +#352134 = EDGE_CURVE('',#352104,#352135,#352137,.T.); +#352135 = VERTEX_POINT('',#352136); +#352136 = CARTESIAN_POINT('',(132.148,-118.7,-4.E-02)); +#352137 = CIRCLE('',#352138,5.199847263156E-02); +#352138 = AXIS2_PLACEMENT_3D('',#352139,#352140,#352141); +#352139 = CARTESIAN_POINT('',(132.14800152739,-118.6480015273,-4.E-02)); +#352140 = DIRECTION('',(0.,0.,-1.)); +#352141 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#352142 = ORIENTED_EDGE('',*,*,#352143,.F.); +#352143 = EDGE_CURVE('',#352144,#352135,#352146,.T.); +#352144 = VERTEX_POINT('',#352145); +#352145 = CARTESIAN_POINT('',(132.148,-118.7,0.)); +#352146 = LINE('',#352147,#352148); +#352147 = CARTESIAN_POINT('',(132.148,-118.7,0.)); +#352148 = VECTOR('',#352149,1.); +#352149 = DIRECTION('',(0.,0.,-1.)); +#352150 = ORIENTED_EDGE('',*,*,#352151,.F.); +#352151 = EDGE_CURVE('',#352112,#352144,#352152,.T.); +#352152 = CIRCLE('',#352153,5.199847263156E-02); +#352153 = AXIS2_PLACEMENT_3D('',#352154,#352155,#352156); +#352154 = CARTESIAN_POINT('',(132.14800152739,-118.6480015273,0.)); +#352155 = DIRECTION('',(0.,0.,-1.)); +#352156 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#352157 = CYLINDRICAL_SURFACE('',#352158,5.199847263156E-02); +#352158 = AXIS2_PLACEMENT_3D('',#352159,#352160,#352161); +#352159 = CARTESIAN_POINT('',(132.14800152739,-118.6480015273,0.)); +#352160 = DIRECTION('',(-0.,-0.,1.)); +#352161 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#352162 = ADVANCED_FACE('',(#352163),#352188,.F.); +#352163 = FACE_BOUND('',#352164,.F.); +#352164 = EDGE_LOOP('',(#352165,#352166,#352174,#352182)); +#352165 = ORIENTED_EDGE('',*,*,#352143,.T.); +#352166 = ORIENTED_EDGE('',*,*,#352167,.T.); +#352167 = EDGE_CURVE('',#352135,#352168,#352170,.T.); +#352168 = VERTEX_POINT('',#352169); +#352169 = CARTESIAN_POINT('',(131.752,-118.7,-4.E-02)); +#352170 = LINE('',#352171,#352172); +#352171 = CARTESIAN_POINT('',(132.148,-118.7,-4.E-02)); +#352172 = VECTOR('',#352173,1.); +#352173 = DIRECTION('',(-1.,0.,0.)); +#352174 = ORIENTED_EDGE('',*,*,#352175,.F.); +#352175 = EDGE_CURVE('',#352176,#352168,#352178,.T.); +#352176 = VERTEX_POINT('',#352177); +#352177 = CARTESIAN_POINT('',(131.752,-118.7,0.)); +#352178 = LINE('',#352179,#352180); +#352179 = CARTESIAN_POINT('',(131.752,-118.7,0.)); +#352180 = VECTOR('',#352181,1.); +#352181 = DIRECTION('',(0.,0.,-1.)); +#352182 = ORIENTED_EDGE('',*,*,#352183,.F.); +#352183 = EDGE_CURVE('',#352144,#352176,#352184,.T.); +#352184 = LINE('',#352185,#352186); +#352185 = CARTESIAN_POINT('',(132.148,-118.7,0.)); +#352186 = VECTOR('',#352187,1.); +#352187 = DIRECTION('',(-1.,0.,0.)); +#352188 = PLANE('',#352189); +#352189 = AXIS2_PLACEMENT_3D('',#352190,#352191,#352192); +#352190 = CARTESIAN_POINT('',(132.148,-118.7,0.)); +#352191 = DIRECTION('',(0.,1.,0.)); +#352192 = DIRECTION('',(-1.,0.,0.)); +#352193 = ADVANCED_FACE('',(#352194),#352221,.T.); +#352194 = FACE_BOUND('',#352195,.F.); +#352195 = EDGE_LOOP('',(#352196,#352197,#352206,#352214)); +#352196 = ORIENTED_EDGE('',*,*,#352175,.T.); +#352197 = ORIENTED_EDGE('',*,*,#352198,.T.); +#352198 = EDGE_CURVE('',#352168,#352199,#352201,.T.); +#352199 = VERTEX_POINT('',#352200); +#352200 = CARTESIAN_POINT('',(131.7,-118.648,-4.E-02)); +#352201 = CIRCLE('',#352202,5.199847263153E-02); +#352202 = AXIS2_PLACEMENT_3D('',#352203,#352204,#352205); +#352203 = CARTESIAN_POINT('',(131.7519984726,-118.6480015273,-4.E-02)); +#352204 = DIRECTION('',(0.,0.,-1.)); +#352205 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#352206 = ORIENTED_EDGE('',*,*,#352207,.F.); +#352207 = EDGE_CURVE('',#352208,#352199,#352210,.T.); +#352208 = VERTEX_POINT('',#352209); +#352209 = CARTESIAN_POINT('',(131.7,-118.648,0.)); +#352210 = LINE('',#352211,#352212); +#352211 = CARTESIAN_POINT('',(131.7,-118.648,0.)); +#352212 = VECTOR('',#352213,1.); +#352213 = DIRECTION('',(0.,0.,-1.)); +#352214 = ORIENTED_EDGE('',*,*,#352215,.F.); +#352215 = EDGE_CURVE('',#352176,#352208,#352216,.T.); +#352216 = CIRCLE('',#352217,5.199847263153E-02); +#352217 = AXIS2_PLACEMENT_3D('',#352218,#352219,#352220); +#352218 = CARTESIAN_POINT('',(131.7519984726,-118.6480015273,0.)); +#352219 = DIRECTION('',(0.,0.,-1.)); +#352220 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#352221 = CYLINDRICAL_SURFACE('',#352222,5.199847263153E-02); +#352222 = AXIS2_PLACEMENT_3D('',#352223,#352224,#352225); +#352223 = CARTESIAN_POINT('',(131.7519984726,-118.6480015273,0.)); +#352224 = DIRECTION('',(-0.,-0.,1.)); +#352225 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#352226 = ADVANCED_FACE('',(#352227),#352243,.F.); +#352227 = FACE_BOUND('',#352228,.F.); +#352228 = EDGE_LOOP('',(#352229,#352230,#352236,#352237)); +#352229 = ORIENTED_EDGE('',*,*,#352207,.T.); +#352230 = ORIENTED_EDGE('',*,*,#352231,.T.); +#352231 = EDGE_CURVE('',#352199,#351999,#352232,.T.); +#352232 = LINE('',#352233,#352234); +#352233 = CARTESIAN_POINT('',(131.7,-118.648,-4.E-02)); +#352234 = VECTOR('',#352235,1.); +#352235 = DIRECTION('',(0.,1.,0.)); +#352236 = ORIENTED_EDGE('',*,*,#351996,.F.); +#352237 = ORIENTED_EDGE('',*,*,#352238,.F.); +#352238 = EDGE_CURVE('',#352208,#351997,#352239,.T.); +#352239 = LINE('',#352240,#352241); +#352240 = CARTESIAN_POINT('',(131.7,-118.648,0.)); +#352241 = VECTOR('',#352242,1.); +#352242 = DIRECTION('',(0.,1.,0.)); +#352243 = PLANE('',#352244); +#352244 = AXIS2_PLACEMENT_3D('',#352245,#352246,#352247); +#352245 = CARTESIAN_POINT('',(131.7,-118.648,0.)); +#352246 = DIRECTION('',(1.,-0.,0.)); +#352247 = DIRECTION('',(0.,1.,0.)); +#352248 = ADVANCED_FACE('',(#352249),#352259,.F.); +#352249 = FACE_BOUND('',#352250,.F.); +#352250 = EDGE_LOOP('',(#352251,#352252,#352253,#352254,#352255,#352256, + #352257,#352258)); +#352251 = ORIENTED_EDGE('',*,*,#352023,.T.); +#352252 = ORIENTED_EDGE('',*,*,#352055,.T.); +#352253 = ORIENTED_EDGE('',*,*,#352087,.T.); +#352254 = ORIENTED_EDGE('',*,*,#352119,.T.); +#352255 = ORIENTED_EDGE('',*,*,#352151,.T.); +#352256 = ORIENTED_EDGE('',*,*,#352183,.T.); +#352257 = ORIENTED_EDGE('',*,*,#352215,.T.); +#352258 = ORIENTED_EDGE('',*,*,#352238,.T.); +#352259 = PLANE('',#352260); +#352260 = AXIS2_PLACEMENT_3D('',#352261,#352262,#352263); +#352261 = CARTESIAN_POINT('',(0.,0.,0.)); +#352262 = DIRECTION('',(-0.,-0.,-1.)); +#352263 = DIRECTION('',(-1.,0.,0.)); +#352264 = ADVANCED_FACE('',(#352265),#352275,.T.); +#352265 = FACE_BOUND('',#352266,.T.); +#352266 = EDGE_LOOP('',(#352267,#352268,#352269,#352270,#352271,#352272, + #352273,#352274)); +#352267 = ORIENTED_EDGE('',*,*,#352006,.T.); +#352268 = ORIENTED_EDGE('',*,*,#352039,.T.); +#352269 = ORIENTED_EDGE('',*,*,#352070,.T.); +#352270 = ORIENTED_EDGE('',*,*,#352103,.T.); +#352271 = ORIENTED_EDGE('',*,*,#352134,.T.); +#352272 = ORIENTED_EDGE('',*,*,#352167,.T.); +#352273 = ORIENTED_EDGE('',*,*,#352198,.T.); +#352274 = ORIENTED_EDGE('',*,*,#352231,.T.); +#352275 = PLANE('',#352276); +#352276 = AXIS2_PLACEMENT_3D('',#352277,#352278,#352279); +#352277 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#352278 = DIRECTION('',(-0.,-0.,-1.)); +#352279 = DIRECTION('',(-1.,0.,0.)); +#352280 = MANIFOLD_SOLID_BREP('',#352281); +#352281 = CLOSED_SHELL('',(#352282,#352324,#352355,#352388,#352419, + #352452,#352483,#352516,#352538,#352554)); +#352282 = ADVANCED_FACE('',(#352283),#352319,.T.); +#352283 = FACE_BOUND('',#352284,.F.); +#352284 = EDGE_LOOP('',(#352285,#352295,#352304,#352312)); +#352285 = ORIENTED_EDGE('',*,*,#352286,.T.); +#352286 = EDGE_CURVE('',#352287,#352289,#352291,.T.); +#352287 = VERTEX_POINT('',#352288); +#352288 = CARTESIAN_POINT('',(128.65,-119.815,0.)); +#352289 = VERTEX_POINT('',#352290); +#352290 = CARTESIAN_POINT('',(128.65,-119.815,-4.E-02)); +#352291 = LINE('',#352292,#352293); +#352292 = CARTESIAN_POINT('',(128.65,-119.815,0.)); +#352293 = VECTOR('',#352294,1.); +#352294 = DIRECTION('',(0.,0.,-1.)); +#352295 = ORIENTED_EDGE('',*,*,#352296,.T.); +#352296 = EDGE_CURVE('',#352289,#352297,#352299,.T.); +#352297 = VERTEX_POINT('',#352298); +#352298 = CARTESIAN_POINT('',(128.785,-119.68,-4.E-02)); +#352299 = CIRCLE('',#352300,0.135001418495); +#352300 = AXIS2_PLACEMENT_3D('',#352301,#352302,#352303); +#352301 = CARTESIAN_POINT('',(128.78500141848,-119.8150014184,-4.E-02)); +#352302 = DIRECTION('',(0.,0.,-1.)); +#352303 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#352304 = ORIENTED_EDGE('',*,*,#352305,.F.); +#352305 = EDGE_CURVE('',#352306,#352297,#352308,.T.); +#352306 = VERTEX_POINT('',#352307); +#352307 = CARTESIAN_POINT('',(128.785,-119.68,0.)); +#352308 = LINE('',#352309,#352310); +#352309 = CARTESIAN_POINT('',(128.785,-119.68,0.)); +#352310 = VECTOR('',#352311,1.); +#352311 = DIRECTION('',(0.,0.,-1.)); +#352312 = ORIENTED_EDGE('',*,*,#352313,.F.); +#352313 = EDGE_CURVE('',#352287,#352306,#352314,.T.); +#352314 = CIRCLE('',#352315,0.135001418495); +#352315 = AXIS2_PLACEMENT_3D('',#352316,#352317,#352318); +#352316 = CARTESIAN_POINT('',(128.78500141848,-119.8150014184,0.)); +#352317 = DIRECTION('',(0.,0.,-1.)); +#352318 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#352319 = CYLINDRICAL_SURFACE('',#352320,0.135001418495); +#352320 = AXIS2_PLACEMENT_3D('',#352321,#352322,#352323); +#352321 = CARTESIAN_POINT('',(128.78500141848,-119.8150014184,0.)); +#352322 = DIRECTION('',(-0.,-0.,1.)); +#352323 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#352324 = ADVANCED_FACE('',(#352325),#352350,.F.); +#352325 = FACE_BOUND('',#352326,.F.); +#352326 = EDGE_LOOP('',(#352327,#352328,#352336,#352344)); +#352327 = ORIENTED_EDGE('',*,*,#352305,.T.); +#352328 = ORIENTED_EDGE('',*,*,#352329,.T.); +#352329 = EDGE_CURVE('',#352297,#352330,#352332,.T.); +#352330 = VERTEX_POINT('',#352331); +#352331 = CARTESIAN_POINT('',(129.055,-119.68,-4.E-02)); +#352332 = LINE('',#352333,#352334); +#352333 = CARTESIAN_POINT('',(128.785,-119.68,-4.E-02)); +#352334 = VECTOR('',#352335,1.); +#352335 = DIRECTION('',(1.,0.,0.)); +#352336 = ORIENTED_EDGE('',*,*,#352337,.F.); +#352337 = EDGE_CURVE('',#352338,#352330,#352340,.T.); +#352338 = VERTEX_POINT('',#352339); +#352339 = CARTESIAN_POINT('',(129.055,-119.68,0.)); +#352340 = LINE('',#352341,#352342); +#352341 = CARTESIAN_POINT('',(129.055,-119.68,0.)); +#352342 = VECTOR('',#352343,1.); +#352343 = DIRECTION('',(0.,0.,-1.)); +#352344 = ORIENTED_EDGE('',*,*,#352345,.F.); +#352345 = EDGE_CURVE('',#352306,#352338,#352346,.T.); +#352346 = LINE('',#352347,#352348); +#352347 = CARTESIAN_POINT('',(128.785,-119.68,0.)); +#352348 = VECTOR('',#352349,1.); +#352349 = DIRECTION('',(1.,0.,0.)); +#352350 = PLANE('',#352351); +#352351 = AXIS2_PLACEMENT_3D('',#352352,#352353,#352354); +#352352 = CARTESIAN_POINT('',(128.785,-119.68,0.)); +#352353 = DIRECTION('',(0.,-1.,0.)); +#352354 = DIRECTION('',(1.,0.,0.)); +#352355 = ADVANCED_FACE('',(#352356),#352383,.T.); +#352356 = FACE_BOUND('',#352357,.F.); +#352357 = EDGE_LOOP('',(#352358,#352359,#352368,#352376)); +#352358 = ORIENTED_EDGE('',*,*,#352337,.T.); +#352359 = ORIENTED_EDGE('',*,*,#352360,.T.); +#352360 = EDGE_CURVE('',#352330,#352361,#352363,.T.); +#352361 = VERTEX_POINT('',#352362); +#352362 = CARTESIAN_POINT('',(129.19,-119.815,-4.E-02)); +#352363 = CIRCLE('',#352364,0.135001418495); +#352364 = AXIS2_PLACEMENT_3D('',#352365,#352366,#352367); +#352365 = CARTESIAN_POINT('',(129.05499858151,-119.8150014184,-4.E-02)); +#352366 = DIRECTION('',(0.,0.,-1.)); +#352367 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#352368 = ORIENTED_EDGE('',*,*,#352369,.F.); +#352369 = EDGE_CURVE('',#352370,#352361,#352372,.T.); +#352370 = VERTEX_POINT('',#352371); +#352371 = CARTESIAN_POINT('',(129.19,-119.815,0.)); +#352372 = LINE('',#352373,#352374); +#352373 = CARTESIAN_POINT('',(129.19,-119.815,0.)); +#352374 = VECTOR('',#352375,1.); +#352375 = DIRECTION('',(0.,0.,-1.)); +#352376 = ORIENTED_EDGE('',*,*,#352377,.F.); +#352377 = EDGE_CURVE('',#352338,#352370,#352378,.T.); +#352378 = CIRCLE('',#352379,0.135001418495); +#352379 = AXIS2_PLACEMENT_3D('',#352380,#352381,#352382); +#352380 = CARTESIAN_POINT('',(129.05499858151,-119.8150014184,0.)); +#352381 = DIRECTION('',(0.,0.,-1.)); +#352382 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#352383 = CYLINDRICAL_SURFACE('',#352384,0.135001418495); +#352384 = AXIS2_PLACEMENT_3D('',#352385,#352386,#352387); +#352385 = CARTESIAN_POINT('',(129.05499858151,-119.8150014184,0.)); +#352386 = DIRECTION('',(-0.,-0.,1.)); +#352387 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#352388 = ADVANCED_FACE('',(#352389),#352414,.F.); +#352389 = FACE_BOUND('',#352390,.F.); +#352390 = EDGE_LOOP('',(#352391,#352392,#352400,#352408)); +#352391 = ORIENTED_EDGE('',*,*,#352369,.T.); +#352392 = ORIENTED_EDGE('',*,*,#352393,.T.); +#352393 = EDGE_CURVE('',#352361,#352394,#352396,.T.); +#352394 = VERTEX_POINT('',#352395); +#352395 = CARTESIAN_POINT('',(129.19,-120.185,-4.E-02)); +#352396 = LINE('',#352397,#352398); +#352397 = CARTESIAN_POINT('',(129.19,-119.815,-4.E-02)); +#352398 = VECTOR('',#352399,1.); +#352399 = DIRECTION('',(0.,-1.,0.)); +#352400 = ORIENTED_EDGE('',*,*,#352401,.F.); +#352401 = EDGE_CURVE('',#352402,#352394,#352404,.T.); +#352402 = VERTEX_POINT('',#352403); +#352403 = CARTESIAN_POINT('',(129.19,-120.185,0.)); +#352404 = LINE('',#352405,#352406); +#352405 = CARTESIAN_POINT('',(129.19,-120.185,0.)); +#352406 = VECTOR('',#352407,1.); +#352407 = DIRECTION('',(0.,0.,-1.)); +#352408 = ORIENTED_EDGE('',*,*,#352409,.F.); +#352409 = EDGE_CURVE('',#352370,#352402,#352410,.T.); +#352410 = LINE('',#352411,#352412); +#352411 = CARTESIAN_POINT('',(129.19,-119.815,0.)); +#352412 = VECTOR('',#352413,1.); +#352413 = DIRECTION('',(0.,-1.,0.)); +#352414 = PLANE('',#352415); +#352415 = AXIS2_PLACEMENT_3D('',#352416,#352417,#352418); +#352416 = CARTESIAN_POINT('',(129.19,-119.815,0.)); +#352417 = DIRECTION('',(-1.,-0.,-0.)); +#352418 = DIRECTION('',(0.,-1.,0.)); +#352419 = ADVANCED_FACE('',(#352420),#352447,.T.); +#352420 = FACE_BOUND('',#352421,.F.); +#352421 = EDGE_LOOP('',(#352422,#352423,#352432,#352440)); +#352422 = ORIENTED_EDGE('',*,*,#352401,.T.); +#352423 = ORIENTED_EDGE('',*,*,#352424,.T.); +#352424 = EDGE_CURVE('',#352394,#352425,#352427,.T.); +#352425 = VERTEX_POINT('',#352426); +#352426 = CARTESIAN_POINT('',(129.055,-120.32,-4.E-02)); +#352427 = CIRCLE('',#352428,0.135001418495); +#352428 = AXIS2_PLACEMENT_3D('',#352429,#352430,#352431); +#352429 = CARTESIAN_POINT('',(129.05499858151,-120.1849985815,-4.E-02)); +#352430 = DIRECTION('',(0.,0.,-1.)); +#352431 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#352432 = ORIENTED_EDGE('',*,*,#352433,.F.); +#352433 = EDGE_CURVE('',#352434,#352425,#352436,.T.); +#352434 = VERTEX_POINT('',#352435); +#352435 = CARTESIAN_POINT('',(129.055,-120.32,0.)); +#352436 = LINE('',#352437,#352438); +#352437 = CARTESIAN_POINT('',(129.055,-120.32,0.)); +#352438 = VECTOR('',#352439,1.); +#352439 = DIRECTION('',(0.,0.,-1.)); +#352440 = ORIENTED_EDGE('',*,*,#352441,.F.); +#352441 = EDGE_CURVE('',#352402,#352434,#352442,.T.); +#352442 = CIRCLE('',#352443,0.135001418495); +#352443 = AXIS2_PLACEMENT_3D('',#352444,#352445,#352446); +#352444 = CARTESIAN_POINT('',(129.05499858151,-120.1849985815,0.)); +#352445 = DIRECTION('',(0.,0.,-1.)); +#352446 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#352447 = CYLINDRICAL_SURFACE('',#352448,0.135001418495); +#352448 = AXIS2_PLACEMENT_3D('',#352449,#352450,#352451); +#352449 = CARTESIAN_POINT('',(129.05499858151,-120.1849985815,0.)); +#352450 = DIRECTION('',(-0.,-0.,1.)); +#352451 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#352452 = ADVANCED_FACE('',(#352453),#352478,.F.); +#352453 = FACE_BOUND('',#352454,.F.); +#352454 = EDGE_LOOP('',(#352455,#352456,#352464,#352472)); +#352455 = ORIENTED_EDGE('',*,*,#352433,.T.); +#352456 = ORIENTED_EDGE('',*,*,#352457,.T.); +#352457 = EDGE_CURVE('',#352425,#352458,#352460,.T.); +#352458 = VERTEX_POINT('',#352459); +#352459 = CARTESIAN_POINT('',(128.785,-120.32,-4.E-02)); +#352460 = LINE('',#352461,#352462); +#352461 = CARTESIAN_POINT('',(129.055,-120.32,-4.E-02)); +#352462 = VECTOR('',#352463,1.); +#352463 = DIRECTION('',(-1.,0.,0.)); +#352464 = ORIENTED_EDGE('',*,*,#352465,.F.); +#352465 = EDGE_CURVE('',#352466,#352458,#352468,.T.); +#352466 = VERTEX_POINT('',#352467); +#352467 = CARTESIAN_POINT('',(128.785,-120.32,0.)); +#352468 = LINE('',#352469,#352470); +#352469 = CARTESIAN_POINT('',(128.785,-120.32,0.)); +#352470 = VECTOR('',#352471,1.); +#352471 = DIRECTION('',(0.,0.,-1.)); +#352472 = ORIENTED_EDGE('',*,*,#352473,.F.); +#352473 = EDGE_CURVE('',#352434,#352466,#352474,.T.); +#352474 = LINE('',#352475,#352476); +#352475 = CARTESIAN_POINT('',(129.055,-120.32,0.)); +#352476 = VECTOR('',#352477,1.); +#352477 = DIRECTION('',(-1.,0.,0.)); +#352478 = PLANE('',#352479); +#352479 = AXIS2_PLACEMENT_3D('',#352480,#352481,#352482); +#352480 = CARTESIAN_POINT('',(129.055,-120.32,0.)); +#352481 = DIRECTION('',(0.,1.,0.)); +#352482 = DIRECTION('',(-1.,0.,0.)); +#352483 = ADVANCED_FACE('',(#352484),#352511,.T.); +#352484 = FACE_BOUND('',#352485,.F.); +#352485 = EDGE_LOOP('',(#352486,#352487,#352496,#352504)); +#352486 = ORIENTED_EDGE('',*,*,#352465,.T.); +#352487 = ORIENTED_EDGE('',*,*,#352488,.T.); +#352488 = EDGE_CURVE('',#352458,#352489,#352491,.T.); +#352489 = VERTEX_POINT('',#352490); +#352490 = CARTESIAN_POINT('',(128.65,-120.185,-4.E-02)); +#352491 = CIRCLE('',#352492,0.135001418495); +#352492 = AXIS2_PLACEMENT_3D('',#352493,#352494,#352495); +#352493 = CARTESIAN_POINT('',(128.78500141848,-120.1849985815,-4.E-02)); +#352494 = DIRECTION('',(0.,0.,-1.)); +#352495 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#352496 = ORIENTED_EDGE('',*,*,#352497,.F.); +#352497 = EDGE_CURVE('',#352498,#352489,#352500,.T.); +#352498 = VERTEX_POINT('',#352499); +#352499 = CARTESIAN_POINT('',(128.65,-120.185,0.)); +#352500 = LINE('',#352501,#352502); +#352501 = CARTESIAN_POINT('',(128.65,-120.185,0.)); +#352502 = VECTOR('',#352503,1.); +#352503 = DIRECTION('',(0.,0.,-1.)); +#352504 = ORIENTED_EDGE('',*,*,#352505,.F.); +#352505 = EDGE_CURVE('',#352466,#352498,#352506,.T.); +#352506 = CIRCLE('',#352507,0.135001418495); +#352507 = AXIS2_PLACEMENT_3D('',#352508,#352509,#352510); +#352508 = CARTESIAN_POINT('',(128.78500141848,-120.1849985815,0.)); +#352509 = DIRECTION('',(0.,0.,-1.)); +#352510 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#352511 = CYLINDRICAL_SURFACE('',#352512,0.135001418495); +#352512 = AXIS2_PLACEMENT_3D('',#352513,#352514,#352515); +#352513 = CARTESIAN_POINT('',(128.78500141848,-120.1849985815,0.)); +#352514 = DIRECTION('',(-0.,-0.,1.)); +#352515 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#352516 = ADVANCED_FACE('',(#352517),#352533,.F.); +#352517 = FACE_BOUND('',#352518,.F.); +#352518 = EDGE_LOOP('',(#352519,#352520,#352526,#352527)); +#352519 = ORIENTED_EDGE('',*,*,#352497,.T.); +#352520 = ORIENTED_EDGE('',*,*,#352521,.T.); +#352521 = EDGE_CURVE('',#352489,#352289,#352522,.T.); +#352522 = LINE('',#352523,#352524); +#352523 = CARTESIAN_POINT('',(128.65,-120.185,-4.E-02)); +#352524 = VECTOR('',#352525,1.); +#352525 = DIRECTION('',(0.,1.,0.)); +#352526 = ORIENTED_EDGE('',*,*,#352286,.F.); +#352527 = ORIENTED_EDGE('',*,*,#352528,.F.); +#352528 = EDGE_CURVE('',#352498,#352287,#352529,.T.); +#352529 = LINE('',#352530,#352531); +#352530 = CARTESIAN_POINT('',(128.65,-120.185,0.)); +#352531 = VECTOR('',#352532,1.); +#352532 = DIRECTION('',(0.,1.,0.)); +#352533 = PLANE('',#352534); +#352534 = AXIS2_PLACEMENT_3D('',#352535,#352536,#352537); +#352535 = CARTESIAN_POINT('',(128.65,-120.185,0.)); +#352536 = DIRECTION('',(1.,-0.,0.)); +#352537 = DIRECTION('',(0.,1.,0.)); +#352538 = ADVANCED_FACE('',(#352539),#352549,.F.); +#352539 = FACE_BOUND('',#352540,.F.); +#352540 = EDGE_LOOP('',(#352541,#352542,#352543,#352544,#352545,#352546, + #352547,#352548)); +#352541 = ORIENTED_EDGE('',*,*,#352313,.T.); +#352542 = ORIENTED_EDGE('',*,*,#352345,.T.); +#352543 = ORIENTED_EDGE('',*,*,#352377,.T.); +#352544 = ORIENTED_EDGE('',*,*,#352409,.T.); +#352545 = ORIENTED_EDGE('',*,*,#352441,.T.); +#352546 = ORIENTED_EDGE('',*,*,#352473,.T.); +#352547 = ORIENTED_EDGE('',*,*,#352505,.T.); +#352548 = ORIENTED_EDGE('',*,*,#352528,.T.); +#352549 = PLANE('',#352550); +#352550 = AXIS2_PLACEMENT_3D('',#352551,#352552,#352553); +#352551 = CARTESIAN_POINT('',(0.,0.,0.)); +#352552 = DIRECTION('',(-0.,-0.,-1.)); +#352553 = DIRECTION('',(-1.,0.,0.)); +#352554 = ADVANCED_FACE('',(#352555),#352565,.T.); +#352555 = FACE_BOUND('',#352556,.T.); +#352556 = EDGE_LOOP('',(#352557,#352558,#352559,#352560,#352561,#352562, + #352563,#352564)); +#352557 = ORIENTED_EDGE('',*,*,#352296,.T.); +#352558 = ORIENTED_EDGE('',*,*,#352329,.T.); +#352559 = ORIENTED_EDGE('',*,*,#352360,.T.); +#352560 = ORIENTED_EDGE('',*,*,#352393,.T.); +#352561 = ORIENTED_EDGE('',*,*,#352424,.T.); +#352562 = ORIENTED_EDGE('',*,*,#352457,.T.); +#352563 = ORIENTED_EDGE('',*,*,#352488,.T.); +#352564 = ORIENTED_EDGE('',*,*,#352521,.T.); +#352565 = PLANE('',#352566); +#352566 = AXIS2_PLACEMENT_3D('',#352567,#352568,#352569); +#352567 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#352568 = DIRECTION('',(-0.,-0.,-1.)); +#352569 = DIRECTION('',(-1.,0.,0.)); +#352570 = MANIFOLD_SOLID_BREP('',#352571); +#352571 = CLOSED_SHELL('',(#352572,#352612,#352643,#352674,#352696, + #352708)); +#352572 = ADVANCED_FACE('',(#352573),#352607,.T.); +#352573 = FACE_BOUND('',#352574,.T.); +#352574 = EDGE_LOOP('',(#352575,#352585,#352593,#352601)); +#352575 = ORIENTED_EDGE('',*,*,#352576,.T.); +#352576 = EDGE_CURVE('',#352577,#352579,#352581,.T.); +#352577 = VERTEX_POINT('',#352578); +#352578 = CARTESIAN_POINT('',(146.,-72.72,1.51)); +#352579 = VERTEX_POINT('',#352580); +#352580 = CARTESIAN_POINT('',(146.,-72.72,1.55)); +#352581 = LINE('',#352582,#352583); +#352582 = CARTESIAN_POINT('',(146.,-72.72,1.51)); +#352583 = VECTOR('',#352584,1.); +#352584 = DIRECTION('',(0.,0.,1.)); +#352585 = ORIENTED_EDGE('',*,*,#352586,.T.); +#352586 = EDGE_CURVE('',#352579,#352587,#352589,.T.); +#352587 = VERTEX_POINT('',#352588); +#352588 = CARTESIAN_POINT('',(146.,-71.82,1.55)); +#352589 = LINE('',#352590,#352591); +#352590 = CARTESIAN_POINT('',(146.,-72.72,1.55)); +#352591 = VECTOR('',#352592,1.); +#352592 = DIRECTION('',(0.,1.,0.)); +#352593 = ORIENTED_EDGE('',*,*,#352594,.F.); +#352594 = EDGE_CURVE('',#352595,#352587,#352597,.T.); +#352595 = VERTEX_POINT('',#352596); +#352596 = CARTESIAN_POINT('',(146.,-71.82,1.51)); +#352597 = LINE('',#352598,#352599); +#352598 = CARTESIAN_POINT('',(146.,-71.82,1.51)); +#352599 = VECTOR('',#352600,1.); +#352600 = DIRECTION('',(0.,0.,1.)); +#352601 = ORIENTED_EDGE('',*,*,#352602,.F.); +#352602 = EDGE_CURVE('',#352577,#352595,#352603,.T.); +#352603 = LINE('',#352604,#352605); +#352604 = CARTESIAN_POINT('',(146.,-72.72,1.51)); +#352605 = VECTOR('',#352606,1.); +#352606 = DIRECTION('',(0.,1.,0.)); +#352607 = PLANE('',#352608); +#352608 = AXIS2_PLACEMENT_3D('',#352609,#352610,#352611); +#352609 = CARTESIAN_POINT('',(146.,-72.72,1.51)); +#352610 = DIRECTION('',(-1.,0.,0.)); +#352611 = DIRECTION('',(0.,1.,0.)); +#352612 = ADVANCED_FACE('',(#352613),#352638,.T.); +#352613 = FACE_BOUND('',#352614,.T.); +#352614 = EDGE_LOOP('',(#352615,#352616,#352624,#352632)); +#352615 = ORIENTED_EDGE('',*,*,#352594,.T.); +#352616 = ORIENTED_EDGE('',*,*,#352617,.T.); +#352617 = EDGE_CURVE('',#352587,#352618,#352620,.T.); +#352618 = VERTEX_POINT('',#352619); +#352619 = CARTESIAN_POINT('',(147.5,-71.82,1.55)); +#352620 = LINE('',#352621,#352622); +#352621 = CARTESIAN_POINT('',(146.,-71.82,1.55)); +#352622 = VECTOR('',#352623,1.); +#352623 = DIRECTION('',(1.,0.,0.)); +#352624 = ORIENTED_EDGE('',*,*,#352625,.F.); +#352625 = EDGE_CURVE('',#352626,#352618,#352628,.T.); +#352626 = VERTEX_POINT('',#352627); +#352627 = CARTESIAN_POINT('',(147.5,-71.82,1.51)); +#352628 = LINE('',#352629,#352630); +#352629 = CARTESIAN_POINT('',(147.5,-71.82,1.51)); +#352630 = VECTOR('',#352631,1.); +#352631 = DIRECTION('',(0.,0.,1.)); +#352632 = ORIENTED_EDGE('',*,*,#352633,.F.); +#352633 = EDGE_CURVE('',#352595,#352626,#352634,.T.); +#352634 = LINE('',#352635,#352636); +#352635 = CARTESIAN_POINT('',(146.,-71.82,1.51)); +#352636 = VECTOR('',#352637,1.); +#352637 = DIRECTION('',(1.,0.,0.)); +#352638 = PLANE('',#352639); +#352639 = AXIS2_PLACEMENT_3D('',#352640,#352641,#352642); +#352640 = CARTESIAN_POINT('',(146.,-71.82,1.51)); +#352641 = DIRECTION('',(0.,1.,0.)); +#352642 = DIRECTION('',(1.,0.,0.)); +#352643 = ADVANCED_FACE('',(#352644),#352669,.T.); +#352644 = FACE_BOUND('',#352645,.T.); +#352645 = EDGE_LOOP('',(#352646,#352647,#352655,#352663)); +#352646 = ORIENTED_EDGE('',*,*,#352625,.T.); +#352647 = ORIENTED_EDGE('',*,*,#352648,.T.); +#352648 = EDGE_CURVE('',#352618,#352649,#352651,.T.); +#352649 = VERTEX_POINT('',#352650); +#352650 = CARTESIAN_POINT('',(147.5,-72.72,1.55)); +#352651 = LINE('',#352652,#352653); +#352652 = CARTESIAN_POINT('',(147.5,-71.82,1.55)); +#352653 = VECTOR('',#352654,1.); +#352654 = DIRECTION('',(0.,-1.,0.)); +#352655 = ORIENTED_EDGE('',*,*,#352656,.F.); +#352656 = EDGE_CURVE('',#352657,#352649,#352659,.T.); +#352657 = VERTEX_POINT('',#352658); +#352658 = CARTESIAN_POINT('',(147.5,-72.72,1.51)); +#352659 = LINE('',#352660,#352661); +#352660 = CARTESIAN_POINT('',(147.5,-72.72,1.51)); +#352661 = VECTOR('',#352662,1.); +#352662 = DIRECTION('',(0.,0.,1.)); +#352663 = ORIENTED_EDGE('',*,*,#352664,.F.); +#352664 = EDGE_CURVE('',#352626,#352657,#352665,.T.); +#352665 = LINE('',#352666,#352667); +#352666 = CARTESIAN_POINT('',(147.5,-71.82,1.51)); +#352667 = VECTOR('',#352668,1.); +#352668 = DIRECTION('',(0.,-1.,0.)); +#352669 = PLANE('',#352670); +#352670 = AXIS2_PLACEMENT_3D('',#352671,#352672,#352673); +#352671 = CARTESIAN_POINT('',(147.5,-71.82,1.51)); +#352672 = DIRECTION('',(1.,0.,-0.)); +#352673 = DIRECTION('',(0.,-1.,0.)); +#352674 = ADVANCED_FACE('',(#352675),#352691,.T.); +#352675 = FACE_BOUND('',#352676,.T.); +#352676 = EDGE_LOOP('',(#352677,#352678,#352684,#352685)); +#352677 = ORIENTED_EDGE('',*,*,#352656,.T.); +#352678 = ORIENTED_EDGE('',*,*,#352679,.T.); +#352679 = EDGE_CURVE('',#352649,#352579,#352680,.T.); +#352680 = LINE('',#352681,#352682); +#352681 = CARTESIAN_POINT('',(147.5,-72.72,1.55)); +#352682 = VECTOR('',#352683,1.); +#352683 = DIRECTION('',(-1.,0.,0.)); +#352684 = ORIENTED_EDGE('',*,*,#352576,.F.); +#352685 = ORIENTED_EDGE('',*,*,#352686,.F.); +#352686 = EDGE_CURVE('',#352657,#352577,#352687,.T.); +#352687 = LINE('',#352688,#352689); +#352688 = CARTESIAN_POINT('',(147.5,-72.72,1.51)); +#352689 = VECTOR('',#352690,1.); +#352690 = DIRECTION('',(-1.,0.,0.)); +#352691 = PLANE('',#352692); +#352692 = AXIS2_PLACEMENT_3D('',#352693,#352694,#352695); +#352693 = CARTESIAN_POINT('',(147.5,-72.72,1.51)); +#352694 = DIRECTION('',(0.,-1.,0.)); +#352695 = DIRECTION('',(-1.,0.,0.)); +#352696 = ADVANCED_FACE('',(#352697),#352703,.F.); +#352697 = FACE_BOUND('',#352698,.T.); +#352698 = EDGE_LOOP('',(#352699,#352700,#352701,#352702)); +#352699 = ORIENTED_EDGE('',*,*,#352602,.T.); +#352700 = ORIENTED_EDGE('',*,*,#352633,.T.); +#352701 = ORIENTED_EDGE('',*,*,#352664,.T.); +#352702 = ORIENTED_EDGE('',*,*,#352686,.T.); +#352703 = PLANE('',#352704); +#352704 = AXIS2_PLACEMENT_3D('',#352705,#352706,#352707); +#352705 = CARTESIAN_POINT('',(0.,0.,1.51)); +#352706 = DIRECTION('',(0.,0.,1.)); +#352707 = DIRECTION('',(1.,0.,-0.)); +#352708 = ADVANCED_FACE('',(#352709),#352715,.T.); +#352709 = FACE_BOUND('',#352710,.F.); +#352710 = EDGE_LOOP('',(#352711,#352712,#352713,#352714)); +#352711 = ORIENTED_EDGE('',*,*,#352586,.T.); +#352712 = ORIENTED_EDGE('',*,*,#352617,.T.); +#352713 = ORIENTED_EDGE('',*,*,#352648,.T.); +#352714 = ORIENTED_EDGE('',*,*,#352679,.T.); +#352715 = PLANE('',#352716); +#352716 = AXIS2_PLACEMENT_3D('',#352717,#352718,#352719); +#352717 = CARTESIAN_POINT('',(0.,0.,1.55)); +#352718 = DIRECTION('',(0.,0.,1.)); +#352719 = DIRECTION('',(1.,0.,-0.)); +#352720 = MANIFOLD_SOLID_BREP('',#352721); +#352721 = CLOSED_SHELL('',(#352722,#352764,#352795,#352828,#352859, + #352892,#352923,#352956,#352978,#352994)); +#352722 = ADVANCED_FACE('',(#352723),#352759,.T.); +#352723 = FACE_BOUND('',#352724,.F.); +#352724 = EDGE_LOOP('',(#352725,#352735,#352744,#352752)); +#352725 = ORIENTED_EDGE('',*,*,#352726,.T.); +#352726 = EDGE_CURVE('',#352727,#352729,#352731,.T.); +#352727 = VERTEX_POINT('',#352728); +#352728 = CARTESIAN_POINT('',(133.8,-118.952,0.)); +#352729 = VERTEX_POINT('',#352730); +#352730 = CARTESIAN_POINT('',(133.8,-118.952,-4.E-02)); +#352731 = LINE('',#352732,#352733); +#352732 = CARTESIAN_POINT('',(133.8,-118.952,0.)); +#352733 = VECTOR('',#352734,1.); +#352734 = DIRECTION('',(0.,0.,-1.)); +#352735 = ORIENTED_EDGE('',*,*,#352736,.T.); +#352736 = EDGE_CURVE('',#352729,#352737,#352739,.T.); +#352737 = VERTEX_POINT('',#352738); +#352738 = CARTESIAN_POINT('',(133.852,-118.9,-4.E-02)); +#352739 = CIRCLE('',#352740,5.199847263153E-02); +#352740 = AXIS2_PLACEMENT_3D('',#352741,#352742,#352743); +#352741 = CARTESIAN_POINT('',(133.8519984726,-118.9519984726,-4.E-02)); +#352742 = DIRECTION('',(0.,0.,-1.)); +#352743 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#352744 = ORIENTED_EDGE('',*,*,#352745,.F.); +#352745 = EDGE_CURVE('',#352746,#352737,#352748,.T.); +#352746 = VERTEX_POINT('',#352747); +#352747 = CARTESIAN_POINT('',(133.852,-118.9,0.)); +#352748 = LINE('',#352749,#352750); +#352749 = CARTESIAN_POINT('',(133.852,-118.9,0.)); +#352750 = VECTOR('',#352751,1.); +#352751 = DIRECTION('',(0.,0.,-1.)); +#352752 = ORIENTED_EDGE('',*,*,#352753,.F.); +#352753 = EDGE_CURVE('',#352727,#352746,#352754,.T.); +#352754 = CIRCLE('',#352755,5.199847263153E-02); +#352755 = AXIS2_PLACEMENT_3D('',#352756,#352757,#352758); +#352756 = CARTESIAN_POINT('',(133.8519984726,-118.9519984726,0.)); +#352757 = DIRECTION('',(0.,0.,-1.)); +#352758 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#352759 = CYLINDRICAL_SURFACE('',#352760,5.199847263153E-02); +#352760 = AXIS2_PLACEMENT_3D('',#352761,#352762,#352763); +#352761 = CARTESIAN_POINT('',(133.8519984726,-118.9519984726,0.)); +#352762 = DIRECTION('',(-0.,-0.,1.)); +#352763 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#352764 = ADVANCED_FACE('',(#352765),#352790,.F.); +#352765 = FACE_BOUND('',#352766,.F.); +#352766 = EDGE_LOOP('',(#352767,#352768,#352776,#352784)); +#352767 = ORIENTED_EDGE('',*,*,#352745,.T.); +#352768 = ORIENTED_EDGE('',*,*,#352769,.T.); +#352769 = EDGE_CURVE('',#352737,#352770,#352772,.T.); +#352770 = VERTEX_POINT('',#352771); +#352771 = CARTESIAN_POINT('',(134.248,-118.9,-4.E-02)); +#352772 = LINE('',#352773,#352774); +#352773 = CARTESIAN_POINT('',(133.852,-118.9,-4.E-02)); +#352774 = VECTOR('',#352775,1.); +#352775 = DIRECTION('',(1.,0.,0.)); +#352776 = ORIENTED_EDGE('',*,*,#352777,.F.); +#352777 = EDGE_CURVE('',#352778,#352770,#352780,.T.); +#352778 = VERTEX_POINT('',#352779); +#352779 = CARTESIAN_POINT('',(134.248,-118.9,0.)); +#352780 = LINE('',#352781,#352782); +#352781 = CARTESIAN_POINT('',(134.248,-118.9,0.)); +#352782 = VECTOR('',#352783,1.); +#352783 = DIRECTION('',(0.,0.,-1.)); +#352784 = ORIENTED_EDGE('',*,*,#352785,.F.); +#352785 = EDGE_CURVE('',#352746,#352778,#352786,.T.); +#352786 = LINE('',#352787,#352788); +#352787 = CARTESIAN_POINT('',(133.852,-118.9,0.)); +#352788 = VECTOR('',#352789,1.); +#352789 = DIRECTION('',(1.,0.,0.)); +#352790 = PLANE('',#352791); +#352791 = AXIS2_PLACEMENT_3D('',#352792,#352793,#352794); +#352792 = CARTESIAN_POINT('',(133.852,-118.9,0.)); +#352793 = DIRECTION('',(0.,-1.,0.)); +#352794 = DIRECTION('',(1.,0.,0.)); +#352795 = ADVANCED_FACE('',(#352796),#352823,.T.); +#352796 = FACE_BOUND('',#352797,.F.); +#352797 = EDGE_LOOP('',(#352798,#352799,#352808,#352816)); +#352798 = ORIENTED_EDGE('',*,*,#352777,.T.); +#352799 = ORIENTED_EDGE('',*,*,#352800,.T.); +#352800 = EDGE_CURVE('',#352770,#352801,#352803,.T.); +#352801 = VERTEX_POINT('',#352802); +#352802 = CARTESIAN_POINT('',(134.3,-118.952,-4.E-02)); +#352803 = CIRCLE('',#352804,5.199847263153E-02); +#352804 = AXIS2_PLACEMENT_3D('',#352805,#352806,#352807); +#352805 = CARTESIAN_POINT('',(134.24800152739,-118.9519984726,-4.E-02)); +#352806 = DIRECTION('',(0.,0.,-1.)); +#352807 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#352808 = ORIENTED_EDGE('',*,*,#352809,.F.); +#352809 = EDGE_CURVE('',#352810,#352801,#352812,.T.); +#352810 = VERTEX_POINT('',#352811); +#352811 = CARTESIAN_POINT('',(134.3,-118.952,0.)); +#352812 = LINE('',#352813,#352814); +#352813 = CARTESIAN_POINT('',(134.3,-118.952,0.)); +#352814 = VECTOR('',#352815,1.); +#352815 = DIRECTION('',(0.,0.,-1.)); +#352816 = ORIENTED_EDGE('',*,*,#352817,.F.); +#352817 = EDGE_CURVE('',#352778,#352810,#352818,.T.); +#352818 = CIRCLE('',#352819,5.199847263153E-02); +#352819 = AXIS2_PLACEMENT_3D('',#352820,#352821,#352822); +#352820 = CARTESIAN_POINT('',(134.24800152739,-118.9519984726,0.)); +#352821 = DIRECTION('',(0.,0.,-1.)); +#352822 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#352823 = CYLINDRICAL_SURFACE('',#352824,5.199847263153E-02); +#352824 = AXIS2_PLACEMENT_3D('',#352825,#352826,#352827); +#352825 = CARTESIAN_POINT('',(134.24800152739,-118.9519984726,0.)); +#352826 = DIRECTION('',(-0.,-0.,1.)); +#352827 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#352828 = ADVANCED_FACE('',(#352829),#352854,.F.); +#352829 = FACE_BOUND('',#352830,.F.); +#352830 = EDGE_LOOP('',(#352831,#352832,#352840,#352848)); +#352831 = ORIENTED_EDGE('',*,*,#352809,.T.); +#352832 = ORIENTED_EDGE('',*,*,#352833,.T.); +#352833 = EDGE_CURVE('',#352801,#352834,#352836,.T.); +#352834 = VERTEX_POINT('',#352835); +#352835 = CARTESIAN_POINT('',(134.3,-119.048,-4.E-02)); +#352836 = LINE('',#352837,#352838); +#352837 = CARTESIAN_POINT('',(134.3,-118.952,-4.E-02)); +#352838 = VECTOR('',#352839,1.); +#352839 = DIRECTION('',(0.,-1.,0.)); +#352840 = ORIENTED_EDGE('',*,*,#352841,.F.); +#352841 = EDGE_CURVE('',#352842,#352834,#352844,.T.); +#352842 = VERTEX_POINT('',#352843); +#352843 = CARTESIAN_POINT('',(134.3,-119.048,0.)); +#352844 = LINE('',#352845,#352846); +#352845 = CARTESIAN_POINT('',(134.3,-119.048,0.)); +#352846 = VECTOR('',#352847,1.); +#352847 = DIRECTION('',(0.,0.,-1.)); +#352848 = ORIENTED_EDGE('',*,*,#352849,.F.); +#352849 = EDGE_CURVE('',#352810,#352842,#352850,.T.); +#352850 = LINE('',#352851,#352852); +#352851 = CARTESIAN_POINT('',(134.3,-118.952,0.)); +#352852 = VECTOR('',#352853,1.); +#352853 = DIRECTION('',(0.,-1.,0.)); +#352854 = PLANE('',#352855); +#352855 = AXIS2_PLACEMENT_3D('',#352856,#352857,#352858); +#352856 = CARTESIAN_POINT('',(134.3,-118.952,0.)); +#352857 = DIRECTION('',(-1.,-0.,-0.)); +#352858 = DIRECTION('',(0.,-1.,0.)); +#352859 = ADVANCED_FACE('',(#352860),#352887,.T.); +#352860 = FACE_BOUND('',#352861,.F.); +#352861 = EDGE_LOOP('',(#352862,#352863,#352872,#352880)); +#352862 = ORIENTED_EDGE('',*,*,#352841,.T.); +#352863 = ORIENTED_EDGE('',*,*,#352864,.T.); +#352864 = EDGE_CURVE('',#352834,#352865,#352867,.T.); +#352865 = VERTEX_POINT('',#352866); +#352866 = CARTESIAN_POINT('',(134.248,-119.1,-4.E-02)); +#352867 = CIRCLE('',#352868,5.199847263153E-02); +#352868 = AXIS2_PLACEMENT_3D('',#352869,#352870,#352871); +#352869 = CARTESIAN_POINT('',(134.24800152739,-119.0480015273,-4.E-02)); +#352870 = DIRECTION('',(0.,0.,-1.)); +#352871 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#352872 = ORIENTED_EDGE('',*,*,#352873,.F.); +#352873 = EDGE_CURVE('',#352874,#352865,#352876,.T.); +#352874 = VERTEX_POINT('',#352875); +#352875 = CARTESIAN_POINT('',(134.248,-119.1,0.)); +#352876 = LINE('',#352877,#352878); +#352877 = CARTESIAN_POINT('',(134.248,-119.1,0.)); +#352878 = VECTOR('',#352879,1.); +#352879 = DIRECTION('',(0.,0.,-1.)); +#352880 = ORIENTED_EDGE('',*,*,#352881,.F.); +#352881 = EDGE_CURVE('',#352842,#352874,#352882,.T.); +#352882 = CIRCLE('',#352883,5.199847263153E-02); +#352883 = AXIS2_PLACEMENT_3D('',#352884,#352885,#352886); +#352884 = CARTESIAN_POINT('',(134.24800152739,-119.0480015273,0.)); +#352885 = DIRECTION('',(0.,0.,-1.)); +#352886 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#352887 = CYLINDRICAL_SURFACE('',#352888,5.199847263153E-02); +#352888 = AXIS2_PLACEMENT_3D('',#352889,#352890,#352891); +#352889 = CARTESIAN_POINT('',(134.24800152739,-119.0480015273,0.)); +#352890 = DIRECTION('',(-0.,-0.,1.)); +#352891 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#352892 = ADVANCED_FACE('',(#352893),#352918,.F.); +#352893 = FACE_BOUND('',#352894,.F.); +#352894 = EDGE_LOOP('',(#352895,#352896,#352904,#352912)); +#352895 = ORIENTED_EDGE('',*,*,#352873,.T.); +#352896 = ORIENTED_EDGE('',*,*,#352897,.T.); +#352897 = EDGE_CURVE('',#352865,#352898,#352900,.T.); +#352898 = VERTEX_POINT('',#352899); +#352899 = CARTESIAN_POINT('',(133.852,-119.1,-4.E-02)); +#352900 = LINE('',#352901,#352902); +#352901 = CARTESIAN_POINT('',(134.248,-119.1,-4.E-02)); +#352902 = VECTOR('',#352903,1.); +#352903 = DIRECTION('',(-1.,0.,0.)); +#352904 = ORIENTED_EDGE('',*,*,#352905,.F.); +#352905 = EDGE_CURVE('',#352906,#352898,#352908,.T.); +#352906 = VERTEX_POINT('',#352907); +#352907 = CARTESIAN_POINT('',(133.852,-119.1,0.)); +#352908 = LINE('',#352909,#352910); +#352909 = CARTESIAN_POINT('',(133.852,-119.1,0.)); +#352910 = VECTOR('',#352911,1.); +#352911 = DIRECTION('',(0.,0.,-1.)); +#352912 = ORIENTED_EDGE('',*,*,#352913,.F.); +#352913 = EDGE_CURVE('',#352874,#352906,#352914,.T.); +#352914 = LINE('',#352915,#352916); +#352915 = CARTESIAN_POINT('',(134.248,-119.1,0.)); +#352916 = VECTOR('',#352917,1.); +#352917 = DIRECTION('',(-1.,0.,0.)); +#352918 = PLANE('',#352919); +#352919 = AXIS2_PLACEMENT_3D('',#352920,#352921,#352922); +#352920 = CARTESIAN_POINT('',(134.248,-119.1,0.)); +#352921 = DIRECTION('',(0.,1.,0.)); +#352922 = DIRECTION('',(-1.,0.,0.)); +#352923 = ADVANCED_FACE('',(#352924),#352951,.T.); +#352924 = FACE_BOUND('',#352925,.F.); +#352925 = EDGE_LOOP('',(#352926,#352927,#352936,#352944)); +#352926 = ORIENTED_EDGE('',*,*,#352905,.T.); +#352927 = ORIENTED_EDGE('',*,*,#352928,.T.); +#352928 = EDGE_CURVE('',#352898,#352929,#352931,.T.); +#352929 = VERTEX_POINT('',#352930); +#352930 = CARTESIAN_POINT('',(133.8,-119.048,-4.E-02)); +#352931 = CIRCLE('',#352932,5.199847263153E-02); +#352932 = AXIS2_PLACEMENT_3D('',#352933,#352934,#352935); +#352933 = CARTESIAN_POINT('',(133.8519984726,-119.0480015273,-4.E-02)); +#352934 = DIRECTION('',(0.,0.,-1.)); +#352935 = DIRECTION('',(2.937376483938E-05,-0.999999999569,0.)); +#352936 = ORIENTED_EDGE('',*,*,#352937,.F.); +#352937 = EDGE_CURVE('',#352938,#352929,#352940,.T.); +#352938 = VERTEX_POINT('',#352939); +#352939 = CARTESIAN_POINT('',(133.8,-119.048,0.)); +#352940 = LINE('',#352941,#352942); +#352941 = CARTESIAN_POINT('',(133.8,-119.048,0.)); +#352942 = VECTOR('',#352943,1.); +#352943 = DIRECTION('',(0.,0.,-1.)); +#352944 = ORIENTED_EDGE('',*,*,#352945,.F.); +#352945 = EDGE_CURVE('',#352906,#352938,#352946,.T.); +#352946 = CIRCLE('',#352947,5.199847263153E-02); +#352947 = AXIS2_PLACEMENT_3D('',#352948,#352949,#352950); +#352948 = CARTESIAN_POINT('',(133.8519984726,-119.0480015273,0.)); +#352949 = DIRECTION('',(0.,0.,-1.)); +#352950 = DIRECTION('',(2.937376483938E-05,-0.999999999569,0.)); +#352951 = CYLINDRICAL_SURFACE('',#352952,5.199847263153E-02); +#352952 = AXIS2_PLACEMENT_3D('',#352953,#352954,#352955); +#352953 = CARTESIAN_POINT('',(133.8519984726,-119.0480015273,0.)); +#352954 = DIRECTION('',(-0.,-0.,1.)); +#352955 = DIRECTION('',(2.937376483938E-05,-0.999999999569,0.)); +#352956 = ADVANCED_FACE('',(#352957),#352973,.F.); +#352957 = FACE_BOUND('',#352958,.F.); +#352958 = EDGE_LOOP('',(#352959,#352960,#352966,#352967)); +#352959 = ORIENTED_EDGE('',*,*,#352937,.T.); +#352960 = ORIENTED_EDGE('',*,*,#352961,.T.); +#352961 = EDGE_CURVE('',#352929,#352729,#352962,.T.); +#352962 = LINE('',#352963,#352964); +#352963 = CARTESIAN_POINT('',(133.8,-119.048,-4.E-02)); +#352964 = VECTOR('',#352965,1.); +#352965 = DIRECTION('',(0.,1.,0.)); +#352966 = ORIENTED_EDGE('',*,*,#352726,.F.); +#352967 = ORIENTED_EDGE('',*,*,#352968,.F.); +#352968 = EDGE_CURVE('',#352938,#352727,#352969,.T.); +#352969 = LINE('',#352970,#352971); +#352970 = CARTESIAN_POINT('',(133.8,-119.048,0.)); +#352971 = VECTOR('',#352972,1.); +#352972 = DIRECTION('',(0.,1.,0.)); +#352973 = PLANE('',#352974); +#352974 = AXIS2_PLACEMENT_3D('',#352975,#352976,#352977); +#352975 = CARTESIAN_POINT('',(133.8,-119.048,0.)); +#352976 = DIRECTION('',(1.,-0.,0.)); +#352977 = DIRECTION('',(0.,1.,0.)); +#352978 = ADVANCED_FACE('',(#352979),#352989,.F.); +#352979 = FACE_BOUND('',#352980,.F.); +#352980 = EDGE_LOOP('',(#352981,#352982,#352983,#352984,#352985,#352986, + #352987,#352988)); +#352981 = ORIENTED_EDGE('',*,*,#352753,.T.); +#352982 = ORIENTED_EDGE('',*,*,#352785,.T.); +#352983 = ORIENTED_EDGE('',*,*,#352817,.T.); +#352984 = ORIENTED_EDGE('',*,*,#352849,.T.); +#352985 = ORIENTED_EDGE('',*,*,#352881,.T.); +#352986 = ORIENTED_EDGE('',*,*,#352913,.T.); +#352987 = ORIENTED_EDGE('',*,*,#352945,.T.); +#352988 = ORIENTED_EDGE('',*,*,#352968,.T.); +#352989 = PLANE('',#352990); +#352990 = AXIS2_PLACEMENT_3D('',#352991,#352992,#352993); +#352991 = CARTESIAN_POINT('',(0.,0.,0.)); +#352992 = DIRECTION('',(-0.,-0.,-1.)); +#352993 = DIRECTION('',(-1.,0.,0.)); +#352994 = ADVANCED_FACE('',(#352995),#353005,.T.); +#352995 = FACE_BOUND('',#352996,.T.); +#352996 = EDGE_LOOP('',(#352997,#352998,#352999,#353000,#353001,#353002, + #353003,#353004)); +#352997 = ORIENTED_EDGE('',*,*,#352736,.T.); +#352998 = ORIENTED_EDGE('',*,*,#352769,.T.); +#352999 = ORIENTED_EDGE('',*,*,#352800,.T.); +#353000 = ORIENTED_EDGE('',*,*,#352833,.T.); +#353001 = ORIENTED_EDGE('',*,*,#352864,.T.); +#353002 = ORIENTED_EDGE('',*,*,#352897,.T.); +#353003 = ORIENTED_EDGE('',*,*,#352928,.T.); +#353004 = ORIENTED_EDGE('',*,*,#352961,.T.); +#353005 = PLANE('',#353006); +#353006 = AXIS2_PLACEMENT_3D('',#353007,#353008,#353009); +#353007 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#353008 = DIRECTION('',(-0.,-0.,-1.)); +#353009 = DIRECTION('',(-1.,0.,0.)); +#353010 = MANIFOLD_SOLID_BREP('',#353011); +#353011 = CLOSED_SHELL('',(#353012,#353054,#353085,#353118,#353149, + #353182,#353213,#353246,#353268,#353284)); +#353012 = ADVANCED_FACE('',(#353013),#353049,.T.); +#353013 = FACE_BOUND('',#353014,.F.); +#353014 = EDGE_LOOP('',(#353015,#353025,#353034,#353042)); +#353015 = ORIENTED_EDGE('',*,*,#353016,.T.); +#353016 = EDGE_CURVE('',#353017,#353019,#353021,.T.); +#353017 = VERTEX_POINT('',#353018); +#353018 = CARTESIAN_POINT('',(136.82,-122.615,0.)); +#353019 = VERTEX_POINT('',#353020); +#353020 = CARTESIAN_POINT('',(136.82,-122.615,-4.E-02)); +#353021 = LINE('',#353022,#353023); +#353022 = CARTESIAN_POINT('',(136.82,-122.615,0.)); +#353023 = VECTOR('',#353024,1.); +#353024 = DIRECTION('',(0.,0.,-1.)); +#353025 = ORIENTED_EDGE('',*,*,#353026,.T.); +#353026 = EDGE_CURVE('',#353019,#353027,#353029,.T.); +#353027 = VERTEX_POINT('',#353028); +#353028 = CARTESIAN_POINT('',(136.955,-122.48,-4.E-02)); +#353029 = CIRCLE('',#353030,0.135001418495); +#353030 = AXIS2_PLACEMENT_3D('',#353031,#353032,#353033); +#353031 = CARTESIAN_POINT('',(136.95500141848,-122.6150014184,-4.E-02)); +#353032 = DIRECTION('',(0.,0.,-1.)); +#353033 = DIRECTION('',(-0.999999999945,1.050720683208E-05,0.)); +#353034 = ORIENTED_EDGE('',*,*,#353035,.F.); +#353035 = EDGE_CURVE('',#353036,#353027,#353038,.T.); +#353036 = VERTEX_POINT('',#353037); +#353037 = CARTESIAN_POINT('',(136.955,-122.48,0.)); +#353038 = LINE('',#353039,#353040); +#353039 = CARTESIAN_POINT('',(136.955,-122.48,0.)); +#353040 = VECTOR('',#353041,1.); +#353041 = DIRECTION('',(0.,0.,-1.)); +#353042 = ORIENTED_EDGE('',*,*,#353043,.F.); +#353043 = EDGE_CURVE('',#353017,#353036,#353044,.T.); +#353044 = CIRCLE('',#353045,0.135001418495); +#353045 = AXIS2_PLACEMENT_3D('',#353046,#353047,#353048); +#353046 = CARTESIAN_POINT('',(136.95500141848,-122.6150014184,0.)); +#353047 = DIRECTION('',(0.,0.,-1.)); +#353048 = DIRECTION('',(-0.999999999945,1.050720683208E-05,0.)); +#353049 = CYLINDRICAL_SURFACE('',#353050,0.135001418495); +#353050 = AXIS2_PLACEMENT_3D('',#353051,#353052,#353053); +#353051 = CARTESIAN_POINT('',(136.95500141848,-122.6150014184,0.)); +#353052 = DIRECTION('',(-0.,-0.,1.)); +#353053 = DIRECTION('',(-0.999999999945,1.050720683208E-05,0.)); +#353054 = ADVANCED_FACE('',(#353055),#353080,.F.); +#353055 = FACE_BOUND('',#353056,.F.); +#353056 = EDGE_LOOP('',(#353057,#353058,#353066,#353074)); +#353057 = ORIENTED_EDGE('',*,*,#353035,.T.); +#353058 = ORIENTED_EDGE('',*,*,#353059,.T.); +#353059 = EDGE_CURVE('',#353027,#353060,#353062,.T.); +#353060 = VERTEX_POINT('',#353061); +#353061 = CARTESIAN_POINT('',(137.225,-122.48,-4.E-02)); +#353062 = LINE('',#353063,#353064); +#353063 = CARTESIAN_POINT('',(136.955,-122.48,-4.E-02)); +#353064 = VECTOR('',#353065,1.); +#353065 = DIRECTION('',(1.,0.,0.)); +#353066 = ORIENTED_EDGE('',*,*,#353067,.F.); +#353067 = EDGE_CURVE('',#353068,#353060,#353070,.T.); +#353068 = VERTEX_POINT('',#353069); +#353069 = CARTESIAN_POINT('',(137.225,-122.48,0.)); +#353070 = LINE('',#353071,#353072); +#353071 = CARTESIAN_POINT('',(137.225,-122.48,0.)); +#353072 = VECTOR('',#353073,1.); +#353073 = DIRECTION('',(0.,0.,-1.)); +#353074 = ORIENTED_EDGE('',*,*,#353075,.F.); +#353075 = EDGE_CURVE('',#353036,#353068,#353076,.T.); +#353076 = LINE('',#353077,#353078); +#353077 = CARTESIAN_POINT('',(136.955,-122.48,0.)); +#353078 = VECTOR('',#353079,1.); +#353079 = DIRECTION('',(1.,0.,0.)); +#353080 = PLANE('',#353081); +#353081 = AXIS2_PLACEMENT_3D('',#353082,#353083,#353084); +#353082 = CARTESIAN_POINT('',(136.955,-122.48,0.)); +#353083 = DIRECTION('',(0.,-1.,0.)); +#353084 = DIRECTION('',(1.,0.,0.)); +#353085 = ADVANCED_FACE('',(#353086),#353113,.T.); +#353086 = FACE_BOUND('',#353087,.F.); +#353087 = EDGE_LOOP('',(#353088,#353089,#353098,#353106)); +#353088 = ORIENTED_EDGE('',*,*,#353067,.T.); +#353089 = ORIENTED_EDGE('',*,*,#353090,.T.); +#353090 = EDGE_CURVE('',#353060,#353091,#353093,.T.); +#353091 = VERTEX_POINT('',#353092); +#353092 = CARTESIAN_POINT('',(137.36,-122.615,-4.E-02)); +#353093 = CIRCLE('',#353094,0.135001418495); +#353094 = AXIS2_PLACEMENT_3D('',#353095,#353096,#353097); +#353095 = CARTESIAN_POINT('',(137.22499858151,-122.6150014184,-4.E-02)); +#353096 = DIRECTION('',(0.,0.,-1.)); +#353097 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#353098 = ORIENTED_EDGE('',*,*,#353099,.F.); +#353099 = EDGE_CURVE('',#353100,#353091,#353102,.T.); +#353100 = VERTEX_POINT('',#353101); +#353101 = CARTESIAN_POINT('',(137.36,-122.615,0.)); +#353102 = LINE('',#353103,#353104); +#353103 = CARTESIAN_POINT('',(137.36,-122.615,0.)); +#353104 = VECTOR('',#353105,1.); +#353105 = DIRECTION('',(0.,0.,-1.)); +#353106 = ORIENTED_EDGE('',*,*,#353107,.F.); +#353107 = EDGE_CURVE('',#353068,#353100,#353108,.T.); +#353108 = CIRCLE('',#353109,0.135001418495); +#353109 = AXIS2_PLACEMENT_3D('',#353110,#353111,#353112); +#353110 = CARTESIAN_POINT('',(137.22499858151,-122.6150014184,0.)); +#353111 = DIRECTION('',(0.,0.,-1.)); +#353112 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#353113 = CYLINDRICAL_SURFACE('',#353114,0.135001418495); +#353114 = AXIS2_PLACEMENT_3D('',#353115,#353116,#353117); +#353115 = CARTESIAN_POINT('',(137.22499858151,-122.6150014184,0.)); +#353116 = DIRECTION('',(-0.,-0.,1.)); +#353117 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#353118 = ADVANCED_FACE('',(#353119),#353144,.F.); +#353119 = FACE_BOUND('',#353120,.F.); +#353120 = EDGE_LOOP('',(#353121,#353122,#353130,#353138)); +#353121 = ORIENTED_EDGE('',*,*,#353099,.T.); +#353122 = ORIENTED_EDGE('',*,*,#353123,.T.); +#353123 = EDGE_CURVE('',#353091,#353124,#353126,.T.); +#353124 = VERTEX_POINT('',#353125); +#353125 = CARTESIAN_POINT('',(137.36,-122.985,-4.E-02)); +#353126 = LINE('',#353127,#353128); +#353127 = CARTESIAN_POINT('',(137.36,-122.615,-4.E-02)); +#353128 = VECTOR('',#353129,1.); +#353129 = DIRECTION('',(0.,-1.,0.)); +#353130 = ORIENTED_EDGE('',*,*,#353131,.F.); +#353131 = EDGE_CURVE('',#353132,#353124,#353134,.T.); +#353132 = VERTEX_POINT('',#353133); +#353133 = CARTESIAN_POINT('',(137.36,-122.985,0.)); +#353134 = LINE('',#353135,#353136); +#353135 = CARTESIAN_POINT('',(137.36,-122.985,0.)); +#353136 = VECTOR('',#353137,1.); +#353137 = DIRECTION('',(0.,0.,-1.)); +#353138 = ORIENTED_EDGE('',*,*,#353139,.F.); +#353139 = EDGE_CURVE('',#353100,#353132,#353140,.T.); +#353140 = LINE('',#353141,#353142); +#353141 = CARTESIAN_POINT('',(137.36,-122.615,0.)); +#353142 = VECTOR('',#353143,1.); +#353143 = DIRECTION('',(0.,-1.,0.)); +#353144 = PLANE('',#353145); +#353145 = AXIS2_PLACEMENT_3D('',#353146,#353147,#353148); +#353146 = CARTESIAN_POINT('',(137.36,-122.615,0.)); +#353147 = DIRECTION('',(-1.,-0.,-0.)); +#353148 = DIRECTION('',(0.,-1.,0.)); +#353149 = ADVANCED_FACE('',(#353150),#353177,.T.); +#353150 = FACE_BOUND('',#353151,.F.); +#353151 = EDGE_LOOP('',(#353152,#353153,#353162,#353170)); +#353152 = ORIENTED_EDGE('',*,*,#353131,.T.); +#353153 = ORIENTED_EDGE('',*,*,#353154,.T.); +#353154 = EDGE_CURVE('',#353124,#353155,#353157,.T.); +#353155 = VERTEX_POINT('',#353156); +#353156 = CARTESIAN_POINT('',(137.225,-123.12,-4.E-02)); +#353157 = CIRCLE('',#353158,0.135001418495); +#353158 = AXIS2_PLACEMENT_3D('',#353159,#353160,#353161); +#353159 = CARTESIAN_POINT('',(137.22499858151,-122.9849985815,-4.E-02)); +#353160 = DIRECTION('',(0.,0.,-1.)); +#353161 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#353162 = ORIENTED_EDGE('',*,*,#353163,.F.); +#353163 = EDGE_CURVE('',#353164,#353155,#353166,.T.); +#353164 = VERTEX_POINT('',#353165); +#353165 = CARTESIAN_POINT('',(137.225,-123.12,0.)); +#353166 = LINE('',#353167,#353168); +#353167 = CARTESIAN_POINT('',(137.225,-123.12,0.)); +#353168 = VECTOR('',#353169,1.); +#353169 = DIRECTION('',(0.,0.,-1.)); +#353170 = ORIENTED_EDGE('',*,*,#353171,.F.); +#353171 = EDGE_CURVE('',#353132,#353164,#353172,.T.); +#353172 = CIRCLE('',#353173,0.135001418495); +#353173 = AXIS2_PLACEMENT_3D('',#353174,#353175,#353176); +#353174 = CARTESIAN_POINT('',(137.22499858151,-122.9849985815,0.)); +#353175 = DIRECTION('',(0.,0.,-1.)); +#353176 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#353177 = CYLINDRICAL_SURFACE('',#353178,0.135001418495); +#353178 = AXIS2_PLACEMENT_3D('',#353179,#353180,#353181); +#353179 = CARTESIAN_POINT('',(137.22499858151,-122.9849985815,0.)); +#353180 = DIRECTION('',(-0.,-0.,1.)); +#353181 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#353182 = ADVANCED_FACE('',(#353183),#353208,.F.); +#353183 = FACE_BOUND('',#353184,.F.); +#353184 = EDGE_LOOP('',(#353185,#353186,#353194,#353202)); +#353185 = ORIENTED_EDGE('',*,*,#353163,.T.); +#353186 = ORIENTED_EDGE('',*,*,#353187,.T.); +#353187 = EDGE_CURVE('',#353155,#353188,#353190,.T.); +#353188 = VERTEX_POINT('',#353189); +#353189 = CARTESIAN_POINT('',(136.955,-123.12,-4.E-02)); +#353190 = LINE('',#353191,#353192); +#353191 = CARTESIAN_POINT('',(137.225,-123.12,-4.E-02)); +#353192 = VECTOR('',#353193,1.); +#353193 = DIRECTION('',(-1.,0.,0.)); +#353194 = ORIENTED_EDGE('',*,*,#353195,.F.); +#353195 = EDGE_CURVE('',#353196,#353188,#353198,.T.); +#353196 = VERTEX_POINT('',#353197); +#353197 = CARTESIAN_POINT('',(136.955,-123.12,0.)); +#353198 = LINE('',#353199,#353200); +#353199 = CARTESIAN_POINT('',(136.955,-123.12,0.)); +#353200 = VECTOR('',#353201,1.); +#353201 = DIRECTION('',(0.,0.,-1.)); +#353202 = ORIENTED_EDGE('',*,*,#353203,.F.); +#353203 = EDGE_CURVE('',#353164,#353196,#353204,.T.); +#353204 = LINE('',#353205,#353206); +#353205 = CARTESIAN_POINT('',(137.225,-123.12,0.)); +#353206 = VECTOR('',#353207,1.); +#353207 = DIRECTION('',(-1.,0.,0.)); +#353208 = PLANE('',#353209); +#353209 = AXIS2_PLACEMENT_3D('',#353210,#353211,#353212); +#353210 = CARTESIAN_POINT('',(137.225,-123.12,0.)); +#353211 = DIRECTION('',(0.,1.,0.)); +#353212 = DIRECTION('',(-1.,0.,0.)); +#353213 = ADVANCED_FACE('',(#353214),#353241,.T.); +#353214 = FACE_BOUND('',#353215,.F.); +#353215 = EDGE_LOOP('',(#353216,#353217,#353226,#353234)); +#353216 = ORIENTED_EDGE('',*,*,#353195,.T.); +#353217 = ORIENTED_EDGE('',*,*,#353218,.T.); +#353218 = EDGE_CURVE('',#353188,#353219,#353221,.T.); +#353219 = VERTEX_POINT('',#353220); +#353220 = CARTESIAN_POINT('',(136.82,-122.985,-4.E-02)); +#353221 = CIRCLE('',#353222,0.135001418495); +#353222 = AXIS2_PLACEMENT_3D('',#353223,#353224,#353225); +#353223 = CARTESIAN_POINT('',(136.95500141848,-122.9849985815,-4.E-02)); +#353224 = DIRECTION('',(0.,0.,-1.)); +#353225 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#353226 = ORIENTED_EDGE('',*,*,#353227,.F.); +#353227 = EDGE_CURVE('',#353228,#353219,#353230,.T.); +#353228 = VERTEX_POINT('',#353229); +#353229 = CARTESIAN_POINT('',(136.82,-122.985,0.)); +#353230 = LINE('',#353231,#353232); +#353231 = CARTESIAN_POINT('',(136.82,-122.985,0.)); +#353232 = VECTOR('',#353233,1.); +#353233 = DIRECTION('',(0.,0.,-1.)); +#353234 = ORIENTED_EDGE('',*,*,#353235,.F.); +#353235 = EDGE_CURVE('',#353196,#353228,#353236,.T.); +#353236 = CIRCLE('',#353237,0.135001418495); +#353237 = AXIS2_PLACEMENT_3D('',#353238,#353239,#353240); +#353238 = CARTESIAN_POINT('',(136.95500141848,-122.9849985815,0.)); +#353239 = DIRECTION('',(0.,0.,-1.)); +#353240 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#353241 = CYLINDRICAL_SURFACE('',#353242,0.135001418495); +#353242 = AXIS2_PLACEMENT_3D('',#353243,#353244,#353245); +#353243 = CARTESIAN_POINT('',(136.95500141848,-122.9849985815,0.)); +#353244 = DIRECTION('',(-0.,-0.,1.)); +#353245 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#353246 = ADVANCED_FACE('',(#353247),#353263,.F.); +#353247 = FACE_BOUND('',#353248,.F.); +#353248 = EDGE_LOOP('',(#353249,#353250,#353256,#353257)); +#353249 = ORIENTED_EDGE('',*,*,#353227,.T.); +#353250 = ORIENTED_EDGE('',*,*,#353251,.T.); +#353251 = EDGE_CURVE('',#353219,#353019,#353252,.T.); +#353252 = LINE('',#353253,#353254); +#353253 = CARTESIAN_POINT('',(136.82,-122.985,-4.E-02)); +#353254 = VECTOR('',#353255,1.); +#353255 = DIRECTION('',(0.,1.,0.)); +#353256 = ORIENTED_EDGE('',*,*,#353016,.F.); +#353257 = ORIENTED_EDGE('',*,*,#353258,.F.); +#353258 = EDGE_CURVE('',#353228,#353017,#353259,.T.); +#353259 = LINE('',#353260,#353261); +#353260 = CARTESIAN_POINT('',(136.82,-122.985,0.)); +#353261 = VECTOR('',#353262,1.); +#353262 = DIRECTION('',(0.,1.,0.)); +#353263 = PLANE('',#353264); +#353264 = AXIS2_PLACEMENT_3D('',#353265,#353266,#353267); +#353265 = CARTESIAN_POINT('',(136.82,-122.985,0.)); +#353266 = DIRECTION('',(1.,-0.,0.)); +#353267 = DIRECTION('',(0.,1.,0.)); +#353268 = ADVANCED_FACE('',(#353269),#353279,.F.); +#353269 = FACE_BOUND('',#353270,.F.); +#353270 = EDGE_LOOP('',(#353271,#353272,#353273,#353274,#353275,#353276, + #353277,#353278)); +#353271 = ORIENTED_EDGE('',*,*,#353043,.T.); +#353272 = ORIENTED_EDGE('',*,*,#353075,.T.); +#353273 = ORIENTED_EDGE('',*,*,#353107,.T.); +#353274 = ORIENTED_EDGE('',*,*,#353139,.T.); +#353275 = ORIENTED_EDGE('',*,*,#353171,.T.); +#353276 = ORIENTED_EDGE('',*,*,#353203,.T.); +#353277 = ORIENTED_EDGE('',*,*,#353235,.T.); +#353278 = ORIENTED_EDGE('',*,*,#353258,.T.); +#353279 = PLANE('',#353280); +#353280 = AXIS2_PLACEMENT_3D('',#353281,#353282,#353283); +#353281 = CARTESIAN_POINT('',(0.,0.,0.)); +#353282 = DIRECTION('',(-0.,-0.,-1.)); +#353283 = DIRECTION('',(-1.,0.,0.)); +#353284 = ADVANCED_FACE('',(#353285),#353295,.T.); +#353285 = FACE_BOUND('',#353286,.T.); +#353286 = EDGE_LOOP('',(#353287,#353288,#353289,#353290,#353291,#353292, + #353293,#353294)); +#353287 = ORIENTED_EDGE('',*,*,#353026,.T.); +#353288 = ORIENTED_EDGE('',*,*,#353059,.T.); +#353289 = ORIENTED_EDGE('',*,*,#353090,.T.); +#353290 = ORIENTED_EDGE('',*,*,#353123,.T.); +#353291 = ORIENTED_EDGE('',*,*,#353154,.T.); +#353292 = ORIENTED_EDGE('',*,*,#353187,.T.); +#353293 = ORIENTED_EDGE('',*,*,#353218,.T.); +#353294 = ORIENTED_EDGE('',*,*,#353251,.T.); +#353295 = PLANE('',#353296); +#353296 = AXIS2_PLACEMENT_3D('',#353297,#353298,#353299); +#353297 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#353298 = DIRECTION('',(-0.,-0.,-1.)); +#353299 = DIRECTION('',(-1.,0.,0.)); +#353300 = MANIFOLD_SOLID_BREP('',#353301); +#353301 = CLOSED_SHELL('',(#353302,#353342,#353373,#353404,#353426, + #353438)); +#353302 = ADVANCED_FACE('',(#353303),#353337,.T.); +#353303 = FACE_BOUND('',#353304,.T.); +#353304 = EDGE_LOOP('',(#353305,#353315,#353323,#353331)); +#353305 = ORIENTED_EDGE('',*,*,#353306,.T.); +#353306 = EDGE_CURVE('',#353307,#353309,#353311,.T.); +#353307 = VERTEX_POINT('',#353308); +#353308 = CARTESIAN_POINT('',(128.5,-70.18,1.51)); +#353309 = VERTEX_POINT('',#353310); +#353310 = CARTESIAN_POINT('',(128.5,-70.18,1.55)); +#353311 = LINE('',#353312,#353313); +#353312 = CARTESIAN_POINT('',(128.5,-70.18,1.51)); +#353313 = VECTOR('',#353314,1.); +#353314 = DIRECTION('',(0.,0.,1.)); +#353315 = ORIENTED_EDGE('',*,*,#353316,.T.); +#353316 = EDGE_CURVE('',#353309,#353317,#353319,.T.); +#353317 = VERTEX_POINT('',#353318); +#353318 = CARTESIAN_POINT('',(128.5,-69.28,1.55)); +#353319 = LINE('',#353320,#353321); +#353320 = CARTESIAN_POINT('',(128.5,-70.18,1.55)); +#353321 = VECTOR('',#353322,1.); +#353322 = DIRECTION('',(0.,1.,0.)); +#353323 = ORIENTED_EDGE('',*,*,#353324,.F.); +#353324 = EDGE_CURVE('',#353325,#353317,#353327,.T.); +#353325 = VERTEX_POINT('',#353326); +#353326 = CARTESIAN_POINT('',(128.5,-69.28,1.51)); +#353327 = LINE('',#353328,#353329); +#353328 = CARTESIAN_POINT('',(128.5,-69.28,1.51)); +#353329 = VECTOR('',#353330,1.); +#353330 = DIRECTION('',(0.,0.,1.)); +#353331 = ORIENTED_EDGE('',*,*,#353332,.F.); +#353332 = EDGE_CURVE('',#353307,#353325,#353333,.T.); +#353333 = LINE('',#353334,#353335); +#353334 = CARTESIAN_POINT('',(128.5,-70.18,1.51)); +#353335 = VECTOR('',#353336,1.); +#353336 = DIRECTION('',(0.,1.,0.)); +#353337 = PLANE('',#353338); +#353338 = AXIS2_PLACEMENT_3D('',#353339,#353340,#353341); +#353339 = CARTESIAN_POINT('',(128.5,-70.18,1.51)); +#353340 = DIRECTION('',(-1.,0.,0.)); +#353341 = DIRECTION('',(0.,1.,0.)); +#353342 = ADVANCED_FACE('',(#353343),#353368,.T.); +#353343 = FACE_BOUND('',#353344,.T.); +#353344 = EDGE_LOOP('',(#353345,#353346,#353354,#353362)); +#353345 = ORIENTED_EDGE('',*,*,#353324,.T.); +#353346 = ORIENTED_EDGE('',*,*,#353347,.T.); +#353347 = EDGE_CURVE('',#353317,#353348,#353350,.T.); +#353348 = VERTEX_POINT('',#353349); +#353349 = CARTESIAN_POINT('',(130.,-69.28,1.55)); +#353350 = LINE('',#353351,#353352); +#353351 = CARTESIAN_POINT('',(128.5,-69.28,1.55)); +#353352 = VECTOR('',#353353,1.); +#353353 = DIRECTION('',(1.,0.,0.)); +#353354 = ORIENTED_EDGE('',*,*,#353355,.F.); +#353355 = EDGE_CURVE('',#353356,#353348,#353358,.T.); +#353356 = VERTEX_POINT('',#353357); +#353357 = CARTESIAN_POINT('',(130.,-69.28,1.51)); +#353358 = LINE('',#353359,#353360); +#353359 = CARTESIAN_POINT('',(130.,-69.28,1.51)); +#353360 = VECTOR('',#353361,1.); +#353361 = DIRECTION('',(0.,0.,1.)); +#353362 = ORIENTED_EDGE('',*,*,#353363,.F.); +#353363 = EDGE_CURVE('',#353325,#353356,#353364,.T.); +#353364 = LINE('',#353365,#353366); +#353365 = CARTESIAN_POINT('',(128.5,-69.28,1.51)); +#353366 = VECTOR('',#353367,1.); +#353367 = DIRECTION('',(1.,0.,0.)); +#353368 = PLANE('',#353369); +#353369 = AXIS2_PLACEMENT_3D('',#353370,#353371,#353372); +#353370 = CARTESIAN_POINT('',(128.5,-69.28,1.51)); +#353371 = DIRECTION('',(0.,1.,0.)); +#353372 = DIRECTION('',(1.,0.,0.)); +#353373 = ADVANCED_FACE('',(#353374),#353399,.T.); +#353374 = FACE_BOUND('',#353375,.T.); +#353375 = EDGE_LOOP('',(#353376,#353377,#353385,#353393)); +#353376 = ORIENTED_EDGE('',*,*,#353355,.T.); +#353377 = ORIENTED_EDGE('',*,*,#353378,.T.); +#353378 = EDGE_CURVE('',#353348,#353379,#353381,.T.); +#353379 = VERTEX_POINT('',#353380); +#353380 = CARTESIAN_POINT('',(130.,-70.18,1.55)); +#353381 = LINE('',#353382,#353383); +#353382 = CARTESIAN_POINT('',(130.,-69.28,1.55)); +#353383 = VECTOR('',#353384,1.); +#353384 = DIRECTION('',(0.,-1.,0.)); +#353385 = ORIENTED_EDGE('',*,*,#353386,.F.); +#353386 = EDGE_CURVE('',#353387,#353379,#353389,.T.); +#353387 = VERTEX_POINT('',#353388); +#353388 = CARTESIAN_POINT('',(130.,-70.18,1.51)); +#353389 = LINE('',#353390,#353391); +#353390 = CARTESIAN_POINT('',(130.,-70.18,1.51)); +#353391 = VECTOR('',#353392,1.); +#353392 = DIRECTION('',(0.,0.,1.)); +#353393 = ORIENTED_EDGE('',*,*,#353394,.F.); +#353394 = EDGE_CURVE('',#353356,#353387,#353395,.T.); +#353395 = LINE('',#353396,#353397); +#353396 = CARTESIAN_POINT('',(130.,-69.28,1.51)); +#353397 = VECTOR('',#353398,1.); +#353398 = DIRECTION('',(0.,-1.,0.)); +#353399 = PLANE('',#353400); +#353400 = AXIS2_PLACEMENT_3D('',#353401,#353402,#353403); +#353401 = CARTESIAN_POINT('',(130.,-69.28,1.51)); +#353402 = DIRECTION('',(1.,0.,-0.)); +#353403 = DIRECTION('',(0.,-1.,0.)); +#353404 = ADVANCED_FACE('',(#353405),#353421,.T.); +#353405 = FACE_BOUND('',#353406,.T.); +#353406 = EDGE_LOOP('',(#353407,#353408,#353414,#353415)); +#353407 = ORIENTED_EDGE('',*,*,#353386,.T.); +#353408 = ORIENTED_EDGE('',*,*,#353409,.T.); +#353409 = EDGE_CURVE('',#353379,#353309,#353410,.T.); +#353410 = LINE('',#353411,#353412); +#353411 = CARTESIAN_POINT('',(130.,-70.18,1.55)); +#353412 = VECTOR('',#353413,1.); +#353413 = DIRECTION('',(-1.,0.,0.)); +#353414 = ORIENTED_EDGE('',*,*,#353306,.F.); +#353415 = ORIENTED_EDGE('',*,*,#353416,.F.); +#353416 = EDGE_CURVE('',#353387,#353307,#353417,.T.); +#353417 = LINE('',#353418,#353419); +#353418 = CARTESIAN_POINT('',(130.,-70.18,1.51)); +#353419 = VECTOR('',#353420,1.); +#353420 = DIRECTION('',(-1.,0.,0.)); +#353421 = PLANE('',#353422); +#353422 = AXIS2_PLACEMENT_3D('',#353423,#353424,#353425); +#353423 = CARTESIAN_POINT('',(130.,-70.18,1.51)); +#353424 = DIRECTION('',(0.,-1.,0.)); +#353425 = DIRECTION('',(-1.,0.,0.)); +#353426 = ADVANCED_FACE('',(#353427),#353433,.F.); +#353427 = FACE_BOUND('',#353428,.T.); +#353428 = EDGE_LOOP('',(#353429,#353430,#353431,#353432)); +#353429 = ORIENTED_EDGE('',*,*,#353332,.T.); +#353430 = ORIENTED_EDGE('',*,*,#353363,.T.); +#353431 = ORIENTED_EDGE('',*,*,#353394,.T.); +#353432 = ORIENTED_EDGE('',*,*,#353416,.T.); +#353433 = PLANE('',#353434); +#353434 = AXIS2_PLACEMENT_3D('',#353435,#353436,#353437); +#353435 = CARTESIAN_POINT('',(0.,0.,1.51)); +#353436 = DIRECTION('',(0.,0.,1.)); +#353437 = DIRECTION('',(1.,0.,-0.)); +#353438 = ADVANCED_FACE('',(#353439),#353445,.T.); +#353439 = FACE_BOUND('',#353440,.F.); +#353440 = EDGE_LOOP('',(#353441,#353442,#353443,#353444)); +#353441 = ORIENTED_EDGE('',*,*,#353316,.T.); +#353442 = ORIENTED_EDGE('',*,*,#353347,.T.); +#353443 = ORIENTED_EDGE('',*,*,#353378,.T.); +#353444 = ORIENTED_EDGE('',*,*,#353409,.T.); +#353445 = PLANE('',#353446); +#353446 = AXIS2_PLACEMENT_3D('',#353447,#353448,#353449); +#353447 = CARTESIAN_POINT('',(0.,0.,1.55)); +#353448 = DIRECTION('',(0.,0.,1.)); +#353449 = DIRECTION('',(1.,0.,-0.)); +#353450 = MANIFOLD_SOLID_BREP('',#353451); +#353451 = CLOSED_SHELL('',(#353452,#353485,#353505,#353525)); +#353452 = ADVANCED_FACE('',(#353453),#353480,.T.); +#353453 = FACE_BOUND('',#353454,.F.); +#353454 = EDGE_LOOP('',(#353455,#353465,#353472,#353473)); +#353455 = ORIENTED_EDGE('',*,*,#353456,.T.); +#353456 = EDGE_CURVE('',#353457,#353459,#353461,.T.); +#353457 = VERTEX_POINT('',#353458); +#353458 = CARTESIAN_POINT('',(138.525,-86.52,1.51)); +#353459 = VERTEX_POINT('',#353460); +#353460 = CARTESIAN_POINT('',(138.525,-86.52,1.55)); +#353461 = LINE('',#353462,#353463); +#353462 = CARTESIAN_POINT('',(138.525,-86.52,1.51)); +#353463 = VECTOR('',#353464,1.); +#353464 = DIRECTION('',(0.,0.,1.)); +#353465 = ORIENTED_EDGE('',*,*,#353466,.T.); +#353466 = EDGE_CURVE('',#353459,#353459,#353467,.T.); +#353467 = CIRCLE('',#353468,1.025); +#353468 = AXIS2_PLACEMENT_3D('',#353469,#353470,#353471); +#353469 = CARTESIAN_POINT('',(137.5,-86.52,1.55)); +#353470 = DIRECTION('',(0.,0.,1.)); +#353471 = DIRECTION('',(1.,0.,-0.)); +#353472 = ORIENTED_EDGE('',*,*,#353456,.F.); +#353473 = ORIENTED_EDGE('',*,*,#353474,.F.); +#353474 = EDGE_CURVE('',#353457,#353457,#353475,.T.); +#353475 = CIRCLE('',#353476,1.025); +#353476 = AXIS2_PLACEMENT_3D('',#353477,#353478,#353479); +#353477 = CARTESIAN_POINT('',(137.5,-86.52,1.51)); +#353478 = DIRECTION('',(0.,0.,1.)); +#353479 = DIRECTION('',(1.,0.,-0.)); +#353480 = CYLINDRICAL_SURFACE('',#353481,1.025); +#353481 = AXIS2_PLACEMENT_3D('',#353482,#353483,#353484); +#353482 = CARTESIAN_POINT('',(137.5,-86.52,1.51)); +#353483 = DIRECTION('',(-0.,-0.,-1.)); +#353484 = DIRECTION('',(1.,0.,-0.)); +#353485 = ADVANCED_FACE('',(#353486,#353489),#353500,.F.); +#353486 = FACE_BOUND('',#353487,.F.); +#353487 = EDGE_LOOP('',(#353488)); +#353488 = ORIENTED_EDGE('',*,*,#353474,.T.); +#353489 = FACE_BOUND('',#353490,.F.); +#353490 = EDGE_LOOP('',(#353491)); +#353491 = ORIENTED_EDGE('',*,*,#353492,.T.); +#353492 = EDGE_CURVE('',#353493,#353493,#353495,.T.); +#353493 = VERTEX_POINT('',#353494); +#353494 = CARTESIAN_POINT('',(137.5,-87.02,1.51)); +#353495 = CIRCLE('',#353496,0.5); +#353496 = AXIS2_PLACEMENT_3D('',#353497,#353498,#353499); +#353497 = CARTESIAN_POINT('',(137.5,-86.52,1.51)); +#353498 = DIRECTION('',(-0.,0.,-1.)); +#353499 = DIRECTION('',(-0.,-1.,0.)); +#353500 = PLANE('',#353501); +#353501 = AXIS2_PLACEMENT_3D('',#353502,#353503,#353504); +#353502 = CARTESIAN_POINT('',(0.,0.,1.51)); +#353503 = DIRECTION('',(0.,0.,1.)); +#353504 = DIRECTION('',(1.,0.,-0.)); +#353505 = ADVANCED_FACE('',(#353506,#353509),#353520,.T.); +#353506 = FACE_BOUND('',#353507,.T.); +#353507 = EDGE_LOOP('',(#353508)); +#353508 = ORIENTED_EDGE('',*,*,#353466,.T.); +#353509 = FACE_BOUND('',#353510,.T.); +#353510 = EDGE_LOOP('',(#353511)); +#353511 = ORIENTED_EDGE('',*,*,#353512,.T.); +#353512 = EDGE_CURVE('',#353513,#353513,#353515,.T.); +#353513 = VERTEX_POINT('',#353514); +#353514 = CARTESIAN_POINT('',(137.5,-87.02,1.55)); +#353515 = CIRCLE('',#353516,0.5); +#353516 = AXIS2_PLACEMENT_3D('',#353517,#353518,#353519); +#353517 = CARTESIAN_POINT('',(137.5,-86.52,1.55)); +#353518 = DIRECTION('',(-0.,0.,-1.)); +#353519 = DIRECTION('',(-0.,-1.,0.)); +#353520 = PLANE('',#353521); +#353521 = AXIS2_PLACEMENT_3D('',#353522,#353523,#353524); +#353522 = CARTESIAN_POINT('',(0.,0.,1.55)); +#353523 = DIRECTION('',(0.,0.,1.)); +#353524 = DIRECTION('',(1.,0.,-0.)); +#353525 = ADVANCED_FACE('',(#353526),#353537,.F.); +#353526 = FACE_BOUND('',#353527,.T.); +#353527 = EDGE_LOOP('',(#353528,#353529,#353535,#353536)); +#353528 = ORIENTED_EDGE('',*,*,#353492,.T.); +#353529 = ORIENTED_EDGE('',*,*,#353530,.T.); +#353530 = EDGE_CURVE('',#353493,#353513,#353531,.T.); +#353531 = LINE('',#353532,#353533); +#353532 = CARTESIAN_POINT('',(137.5,-87.02,-4.6E-02)); +#353533 = VECTOR('',#353534,1.); +#353534 = DIRECTION('',(0.,0.,1.)); +#353535 = ORIENTED_EDGE('',*,*,#353512,.F.); +#353536 = ORIENTED_EDGE('',*,*,#353530,.F.); +#353537 = CYLINDRICAL_SURFACE('',#353538,0.5); +#353538 = AXIS2_PLACEMENT_3D('',#353539,#353540,#353541); +#353539 = CARTESIAN_POINT('',(137.5,-86.52,-4.6E-02)); +#353540 = DIRECTION('',(-0.,-0.,-1.)); +#353541 = DIRECTION('',(-0.,-1.,0.)); +#353542 = MANIFOLD_SOLID_BREP('',#353543); +#353543 = CLOSED_SHELL('',(#353544,#353577,#353597,#353617)); +#353544 = ADVANCED_FACE('',(#353545),#353572,.T.); +#353545 = FACE_BOUND('',#353546,.T.); +#353546 = EDGE_LOOP('',(#353547,#353557,#353564,#353565)); +#353547 = ORIENTED_EDGE('',*,*,#353548,.T.); +#353548 = EDGE_CURVE('',#353549,#353551,#353553,.T.); +#353549 = VERTEX_POINT('',#353550); +#353550 = CARTESIAN_POINT('',(138.525,-86.52,0.)); +#353551 = VERTEX_POINT('',#353552); +#353552 = CARTESIAN_POINT('',(138.525,-86.52,-4.E-02)); +#353553 = LINE('',#353554,#353555); +#353554 = CARTESIAN_POINT('',(138.525,-86.52,0.)); +#353555 = VECTOR('',#353556,1.); +#353556 = DIRECTION('',(0.,0.,-1.)); +#353557 = ORIENTED_EDGE('',*,*,#353558,.T.); +#353558 = EDGE_CURVE('',#353551,#353551,#353559,.T.); +#353559 = CIRCLE('',#353560,1.025); +#353560 = AXIS2_PLACEMENT_3D('',#353561,#353562,#353563); +#353561 = CARTESIAN_POINT('',(137.5,-86.52,-4.E-02)); +#353562 = DIRECTION('',(0.,0.,1.)); +#353563 = DIRECTION('',(1.,0.,-0.)); +#353564 = ORIENTED_EDGE('',*,*,#353548,.F.); +#353565 = ORIENTED_EDGE('',*,*,#353566,.F.); +#353566 = EDGE_CURVE('',#353549,#353549,#353567,.T.); +#353567 = CIRCLE('',#353568,1.025); +#353568 = AXIS2_PLACEMENT_3D('',#353569,#353570,#353571); +#353569 = CARTESIAN_POINT('',(137.5,-86.52,0.)); +#353570 = DIRECTION('',(0.,0.,1.)); +#353571 = DIRECTION('',(1.,0.,-0.)); +#353572 = CYLINDRICAL_SURFACE('',#353573,1.025); +#353573 = AXIS2_PLACEMENT_3D('',#353574,#353575,#353576); +#353574 = CARTESIAN_POINT('',(137.5,-86.52,0.)); +#353575 = DIRECTION('',(0.,0.,1.)); +#353576 = DIRECTION('',(1.,0.,-0.)); +#353577 = ADVANCED_FACE('',(#353578,#353581),#353592,.F.); +#353578 = FACE_BOUND('',#353579,.F.); +#353579 = EDGE_LOOP('',(#353580)); +#353580 = ORIENTED_EDGE('',*,*,#353566,.F.); +#353581 = FACE_BOUND('',#353582,.F.); +#353582 = EDGE_LOOP('',(#353583)); +#353583 = ORIENTED_EDGE('',*,*,#353584,.F.); +#353584 = EDGE_CURVE('',#353585,#353585,#353587,.T.); +#353585 = VERTEX_POINT('',#353586); +#353586 = CARTESIAN_POINT('',(137.5,-87.02,0.)); +#353587 = CIRCLE('',#353588,0.5); +#353588 = AXIS2_PLACEMENT_3D('',#353589,#353590,#353591); +#353589 = CARTESIAN_POINT('',(137.5,-86.52,0.)); +#353590 = DIRECTION('',(-0.,0.,-1.)); +#353591 = DIRECTION('',(-0.,-1.,0.)); +#353592 = PLANE('',#353593); +#353593 = AXIS2_PLACEMENT_3D('',#353594,#353595,#353596); +#353594 = CARTESIAN_POINT('',(0.,0.,0.)); +#353595 = DIRECTION('',(-0.,-0.,-1.)); +#353596 = DIRECTION('',(-1.,0.,0.)); +#353597 = ADVANCED_FACE('',(#353598,#353601),#353612,.T.); +#353598 = FACE_BOUND('',#353599,.T.); +#353599 = EDGE_LOOP('',(#353600)); +#353600 = ORIENTED_EDGE('',*,*,#353558,.F.); +#353601 = FACE_BOUND('',#353602,.T.); +#353602 = EDGE_LOOP('',(#353603)); +#353603 = ORIENTED_EDGE('',*,*,#353604,.F.); +#353604 = EDGE_CURVE('',#353605,#353605,#353607,.T.); +#353605 = VERTEX_POINT('',#353606); +#353606 = CARTESIAN_POINT('',(137.5,-87.02,-4.E-02)); +#353607 = CIRCLE('',#353608,0.5); +#353608 = AXIS2_PLACEMENT_3D('',#353609,#353610,#353611); +#353609 = CARTESIAN_POINT('',(137.5,-86.52,-4.E-02)); +#353610 = DIRECTION('',(-0.,0.,-1.)); +#353611 = DIRECTION('',(-0.,-1.,0.)); +#353612 = PLANE('',#353613); +#353613 = AXIS2_PLACEMENT_3D('',#353614,#353615,#353616); +#353614 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#353615 = DIRECTION('',(-0.,-0.,-1.)); +#353616 = DIRECTION('',(-1.,0.,0.)); +#353617 = ADVANCED_FACE('',(#353618),#353629,.F.); +#353618 = FACE_BOUND('',#353619,.T.); +#353619 = EDGE_LOOP('',(#353620,#353621,#353627,#353628)); +#353620 = ORIENTED_EDGE('',*,*,#353604,.T.); +#353621 = ORIENTED_EDGE('',*,*,#353622,.T.); +#353622 = EDGE_CURVE('',#353605,#353585,#353623,.T.); +#353623 = LINE('',#353624,#353625); +#353624 = CARTESIAN_POINT('',(137.5,-87.02,-4.6E-02)); +#353625 = VECTOR('',#353626,1.); +#353626 = DIRECTION('',(0.,0.,1.)); +#353627 = ORIENTED_EDGE('',*,*,#353584,.F.); +#353628 = ORIENTED_EDGE('',*,*,#353622,.F.); +#353629 = CYLINDRICAL_SURFACE('',#353630,0.5); +#353630 = AXIS2_PLACEMENT_3D('',#353631,#353632,#353633); +#353631 = CARTESIAN_POINT('',(137.5,-86.52,-4.6E-02)); +#353632 = DIRECTION('',(-0.,-0.,-1.)); +#353633 = DIRECTION('',(-0.,-1.,0.)); +#353634 = MANIFOLD_SOLID_BREP('',#353635); +#353635 = CLOSED_SHELL('',(#353636,#353669,#353689,#353709)); +#353636 = ADVANCED_FACE('',(#353637),#353664,.T.); +#353637 = FACE_BOUND('',#353638,.F.); +#353638 = EDGE_LOOP('',(#353639,#353649,#353656,#353657)); +#353639 = ORIENTED_EDGE('',*,*,#353640,.T.); +#353640 = EDGE_CURVE('',#353641,#353643,#353645,.T.); +#353641 = VERTEX_POINT('',#353642); +#353642 = CARTESIAN_POINT('',(137.5,-87.045,-4.E-02)); +#353643 = VERTEX_POINT('',#353644); +#353644 = CARTESIAN_POINT('',(137.5,-87.045,1.55)); +#353645 = LINE('',#353646,#353647); +#353646 = CARTESIAN_POINT('',(137.5,-87.045,-4.E-02)); +#353647 = VECTOR('',#353648,1.); +#353648 = DIRECTION('',(0.,0.,1.)); +#353649 = ORIENTED_EDGE('',*,*,#353650,.T.); +#353650 = EDGE_CURVE('',#353643,#353643,#353651,.T.); +#353651 = CIRCLE('',#353652,0.525); +#353652 = AXIS2_PLACEMENT_3D('',#353653,#353654,#353655); +#353653 = CARTESIAN_POINT('',(137.5,-86.52,1.55)); +#353654 = DIRECTION('',(0.,0.,1.)); +#353655 = DIRECTION('',(-0.,-1.,0.)); +#353656 = ORIENTED_EDGE('',*,*,#353640,.F.); +#353657 = ORIENTED_EDGE('',*,*,#353658,.F.); +#353658 = EDGE_CURVE('',#353641,#353641,#353659,.T.); +#353659 = CIRCLE('',#353660,0.525); +#353660 = AXIS2_PLACEMENT_3D('',#353661,#353662,#353663); +#353661 = CARTESIAN_POINT('',(137.5,-86.52,-4.E-02)); +#353662 = DIRECTION('',(0.,0.,1.)); +#353663 = DIRECTION('',(-0.,-1.,0.)); +#353664 = CYLINDRICAL_SURFACE('',#353665,0.525); +#353665 = AXIS2_PLACEMENT_3D('',#353666,#353667,#353668); +#353666 = CARTESIAN_POINT('',(137.5,-86.52,-4.E-02)); +#353667 = DIRECTION('',(-0.,-0.,-1.)); +#353668 = DIRECTION('',(-0.,-1.,0.)); +#353669 = ADVANCED_FACE('',(#353670,#353673),#353684,.F.); +#353670 = FACE_BOUND('',#353671,.F.); +#353671 = EDGE_LOOP('',(#353672)); +#353672 = ORIENTED_EDGE('',*,*,#353658,.T.); +#353673 = FACE_BOUND('',#353674,.F.); +#353674 = EDGE_LOOP('',(#353675)); +#353675 = ORIENTED_EDGE('',*,*,#353676,.T.); +#353676 = EDGE_CURVE('',#353677,#353677,#353679,.T.); +#353677 = VERTEX_POINT('',#353678); +#353678 = CARTESIAN_POINT('',(137.5,-87.02,-4.E-02)); +#353679 = CIRCLE('',#353680,0.5); +#353680 = AXIS2_PLACEMENT_3D('',#353681,#353682,#353683); +#353681 = CARTESIAN_POINT('',(137.5,-86.52,-4.E-02)); +#353682 = DIRECTION('',(-0.,0.,-1.)); +#353683 = DIRECTION('',(-0.,-1.,0.)); +#353684 = PLANE('',#353685); +#353685 = AXIS2_PLACEMENT_3D('',#353686,#353687,#353688); +#353686 = CARTESIAN_POINT('',(137.5,-87.045,-4.E-02)); +#353687 = DIRECTION('',(0.,0.,1.)); +#353688 = DIRECTION('',(1.,0.,-0.)); +#353689 = ADVANCED_FACE('',(#353690,#353693),#353704,.T.); +#353690 = FACE_BOUND('',#353691,.T.); +#353691 = EDGE_LOOP('',(#353692)); +#353692 = ORIENTED_EDGE('',*,*,#353650,.T.); +#353693 = FACE_BOUND('',#353694,.T.); +#353694 = EDGE_LOOP('',(#353695)); +#353695 = ORIENTED_EDGE('',*,*,#353696,.T.); +#353696 = EDGE_CURVE('',#353697,#353697,#353699,.T.); +#353697 = VERTEX_POINT('',#353698); +#353698 = CARTESIAN_POINT('',(137.5,-87.02,1.55)); +#353699 = CIRCLE('',#353700,0.5); +#353700 = AXIS2_PLACEMENT_3D('',#353701,#353702,#353703); +#353701 = CARTESIAN_POINT('',(137.5,-86.52,1.55)); +#353702 = DIRECTION('',(-0.,0.,-1.)); +#353703 = DIRECTION('',(-0.,-1.,0.)); +#353704 = PLANE('',#353705); +#353705 = AXIS2_PLACEMENT_3D('',#353706,#353707,#353708); +#353706 = CARTESIAN_POINT('',(137.5,-87.045,1.55)); +#353707 = DIRECTION('',(0.,0.,1.)); +#353708 = DIRECTION('',(1.,0.,-0.)); +#353709 = ADVANCED_FACE('',(#353710),#353721,.F.); +#353710 = FACE_BOUND('',#353711,.T.); +#353711 = EDGE_LOOP('',(#353712,#353713,#353719,#353720)); +#353712 = ORIENTED_EDGE('',*,*,#353676,.T.); +#353713 = ORIENTED_EDGE('',*,*,#353714,.T.); +#353714 = EDGE_CURVE('',#353677,#353697,#353715,.T.); +#353715 = LINE('',#353716,#353717); +#353716 = CARTESIAN_POINT('',(137.5,-87.02,-4.6E-02)); +#353717 = VECTOR('',#353718,1.); +#353718 = DIRECTION('',(0.,0.,1.)); +#353719 = ORIENTED_EDGE('',*,*,#353696,.F.); +#353720 = ORIENTED_EDGE('',*,*,#353714,.F.); +#353721 = CYLINDRICAL_SURFACE('',#353722,0.5); +#353722 = AXIS2_PLACEMENT_3D('',#353723,#353724,#353725); +#353723 = CARTESIAN_POINT('',(137.5,-86.52,-4.6E-02)); +#353724 = DIRECTION('',(-0.,-0.,-1.)); +#353725 = DIRECTION('',(-0.,-1.,0.)); +#353726 = MANIFOLD_SOLID_BREP('',#353727); +#353727 = CLOSED_SHELL('',(#353728,#353768,#353799,#353830,#353852, + #353864)); +#353728 = ADVANCED_FACE('',(#353729),#353763,.T.); +#353729 = FACE_BOUND('',#353730,.T.); +#353730 = EDGE_LOOP('',(#353731,#353741,#353749,#353757)); +#353731 = ORIENTED_EDGE('',*,*,#353732,.T.); +#353732 = EDGE_CURVE('',#353733,#353735,#353737,.T.); +#353733 = VERTEX_POINT('',#353734); +#353734 = CARTESIAN_POINT('',(128.5,-71.45,1.51)); +#353735 = VERTEX_POINT('',#353736); +#353736 = CARTESIAN_POINT('',(128.5,-71.45,1.55)); +#353737 = LINE('',#353738,#353739); +#353738 = CARTESIAN_POINT('',(128.5,-71.45,1.51)); +#353739 = VECTOR('',#353740,1.); +#353740 = DIRECTION('',(0.,0.,1.)); +#353741 = ORIENTED_EDGE('',*,*,#353742,.T.); +#353742 = EDGE_CURVE('',#353735,#353743,#353745,.T.); +#353743 = VERTEX_POINT('',#353744); +#353744 = CARTESIAN_POINT('',(128.5,-70.55,1.55)); +#353745 = LINE('',#353746,#353747); +#353746 = CARTESIAN_POINT('',(128.5,-71.45,1.55)); +#353747 = VECTOR('',#353748,1.); +#353748 = DIRECTION('',(0.,1.,0.)); +#353749 = ORIENTED_EDGE('',*,*,#353750,.F.); +#353750 = EDGE_CURVE('',#353751,#353743,#353753,.T.); +#353751 = VERTEX_POINT('',#353752); +#353752 = CARTESIAN_POINT('',(128.5,-70.55,1.51)); +#353753 = LINE('',#353754,#353755); +#353754 = CARTESIAN_POINT('',(128.5,-70.55,1.51)); +#353755 = VECTOR('',#353756,1.); +#353756 = DIRECTION('',(0.,0.,1.)); +#353757 = ORIENTED_EDGE('',*,*,#353758,.F.); +#353758 = EDGE_CURVE('',#353733,#353751,#353759,.T.); +#353759 = LINE('',#353760,#353761); +#353760 = CARTESIAN_POINT('',(128.5,-71.45,1.51)); +#353761 = VECTOR('',#353762,1.); +#353762 = DIRECTION('',(0.,1.,0.)); +#353763 = PLANE('',#353764); +#353764 = AXIS2_PLACEMENT_3D('',#353765,#353766,#353767); +#353765 = CARTESIAN_POINT('',(128.5,-71.45,1.51)); +#353766 = DIRECTION('',(-1.,0.,0.)); +#353767 = DIRECTION('',(0.,1.,0.)); +#353768 = ADVANCED_FACE('',(#353769),#353794,.T.); +#353769 = FACE_BOUND('',#353770,.T.); +#353770 = EDGE_LOOP('',(#353771,#353772,#353780,#353788)); +#353771 = ORIENTED_EDGE('',*,*,#353750,.T.); +#353772 = ORIENTED_EDGE('',*,*,#353773,.T.); +#353773 = EDGE_CURVE('',#353743,#353774,#353776,.T.); +#353774 = VERTEX_POINT('',#353775); +#353775 = CARTESIAN_POINT('',(130.,-70.55,1.55)); +#353776 = LINE('',#353777,#353778); +#353777 = CARTESIAN_POINT('',(128.5,-70.55,1.55)); +#353778 = VECTOR('',#353779,1.); +#353779 = DIRECTION('',(1.,0.,0.)); +#353780 = ORIENTED_EDGE('',*,*,#353781,.F.); +#353781 = EDGE_CURVE('',#353782,#353774,#353784,.T.); +#353782 = VERTEX_POINT('',#353783); +#353783 = CARTESIAN_POINT('',(130.,-70.55,1.51)); +#353784 = LINE('',#353785,#353786); +#353785 = CARTESIAN_POINT('',(130.,-70.55,1.51)); +#353786 = VECTOR('',#353787,1.); +#353787 = DIRECTION('',(0.,0.,1.)); +#353788 = ORIENTED_EDGE('',*,*,#353789,.F.); +#353789 = EDGE_CURVE('',#353751,#353782,#353790,.T.); +#353790 = LINE('',#353791,#353792); +#353791 = CARTESIAN_POINT('',(128.5,-70.55,1.51)); +#353792 = VECTOR('',#353793,1.); +#353793 = DIRECTION('',(1.,0.,0.)); +#353794 = PLANE('',#353795); +#353795 = AXIS2_PLACEMENT_3D('',#353796,#353797,#353798); +#353796 = CARTESIAN_POINT('',(128.5,-70.55,1.51)); +#353797 = DIRECTION('',(0.,1.,0.)); +#353798 = DIRECTION('',(1.,0.,0.)); +#353799 = ADVANCED_FACE('',(#353800),#353825,.T.); +#353800 = FACE_BOUND('',#353801,.T.); +#353801 = EDGE_LOOP('',(#353802,#353803,#353811,#353819)); +#353802 = ORIENTED_EDGE('',*,*,#353781,.T.); +#353803 = ORIENTED_EDGE('',*,*,#353804,.T.); +#353804 = EDGE_CURVE('',#353774,#353805,#353807,.T.); +#353805 = VERTEX_POINT('',#353806); +#353806 = CARTESIAN_POINT('',(130.,-71.45,1.55)); +#353807 = LINE('',#353808,#353809); +#353808 = CARTESIAN_POINT('',(130.,-70.55,1.55)); +#353809 = VECTOR('',#353810,1.); +#353810 = DIRECTION('',(0.,-1.,0.)); +#353811 = ORIENTED_EDGE('',*,*,#353812,.F.); +#353812 = EDGE_CURVE('',#353813,#353805,#353815,.T.); +#353813 = VERTEX_POINT('',#353814); +#353814 = CARTESIAN_POINT('',(130.,-71.45,1.51)); +#353815 = LINE('',#353816,#353817); +#353816 = CARTESIAN_POINT('',(130.,-71.45,1.51)); +#353817 = VECTOR('',#353818,1.); +#353818 = DIRECTION('',(0.,0.,1.)); +#353819 = ORIENTED_EDGE('',*,*,#353820,.F.); +#353820 = EDGE_CURVE('',#353782,#353813,#353821,.T.); +#353821 = LINE('',#353822,#353823); +#353822 = CARTESIAN_POINT('',(130.,-70.55,1.51)); +#353823 = VECTOR('',#353824,1.); +#353824 = DIRECTION('',(0.,-1.,0.)); +#353825 = PLANE('',#353826); +#353826 = AXIS2_PLACEMENT_3D('',#353827,#353828,#353829); +#353827 = CARTESIAN_POINT('',(130.,-70.55,1.51)); +#353828 = DIRECTION('',(1.,0.,-0.)); +#353829 = DIRECTION('',(0.,-1.,0.)); +#353830 = ADVANCED_FACE('',(#353831),#353847,.T.); +#353831 = FACE_BOUND('',#353832,.T.); +#353832 = EDGE_LOOP('',(#353833,#353834,#353840,#353841)); +#353833 = ORIENTED_EDGE('',*,*,#353812,.T.); +#353834 = ORIENTED_EDGE('',*,*,#353835,.T.); +#353835 = EDGE_CURVE('',#353805,#353735,#353836,.T.); +#353836 = LINE('',#353837,#353838); +#353837 = CARTESIAN_POINT('',(130.,-71.45,1.55)); +#353838 = VECTOR('',#353839,1.); +#353839 = DIRECTION('',(-1.,0.,0.)); +#353840 = ORIENTED_EDGE('',*,*,#353732,.F.); +#353841 = ORIENTED_EDGE('',*,*,#353842,.F.); +#353842 = EDGE_CURVE('',#353813,#353733,#353843,.T.); +#353843 = LINE('',#353844,#353845); +#353844 = CARTESIAN_POINT('',(130.,-71.45,1.51)); +#353845 = VECTOR('',#353846,1.); +#353846 = DIRECTION('',(-1.,0.,0.)); +#353847 = PLANE('',#353848); +#353848 = AXIS2_PLACEMENT_3D('',#353849,#353850,#353851); +#353849 = CARTESIAN_POINT('',(130.,-71.45,1.51)); +#353850 = DIRECTION('',(0.,-1.,0.)); +#353851 = DIRECTION('',(-1.,0.,0.)); +#353852 = ADVANCED_FACE('',(#353853),#353859,.F.); +#353853 = FACE_BOUND('',#353854,.T.); +#353854 = EDGE_LOOP('',(#353855,#353856,#353857,#353858)); +#353855 = ORIENTED_EDGE('',*,*,#353758,.T.); +#353856 = ORIENTED_EDGE('',*,*,#353789,.T.); +#353857 = ORIENTED_EDGE('',*,*,#353820,.T.); +#353858 = ORIENTED_EDGE('',*,*,#353842,.T.); +#353859 = PLANE('',#353860); +#353860 = AXIS2_PLACEMENT_3D('',#353861,#353862,#353863); +#353861 = CARTESIAN_POINT('',(0.,0.,1.51)); +#353862 = DIRECTION('',(0.,0.,1.)); +#353863 = DIRECTION('',(1.,0.,-0.)); +#353864 = ADVANCED_FACE('',(#353865),#353871,.T.); +#353865 = FACE_BOUND('',#353866,.F.); +#353866 = EDGE_LOOP('',(#353867,#353868,#353869,#353870)); +#353867 = ORIENTED_EDGE('',*,*,#353742,.T.); +#353868 = ORIENTED_EDGE('',*,*,#353773,.T.); +#353869 = ORIENTED_EDGE('',*,*,#353804,.T.); +#353870 = ORIENTED_EDGE('',*,*,#353835,.T.); +#353871 = PLANE('',#353872); +#353872 = AXIS2_PLACEMENT_3D('',#353873,#353874,#353875); +#353873 = CARTESIAN_POINT('',(0.,0.,1.55)); +#353874 = DIRECTION('',(0.,0.,1.)); +#353875 = DIRECTION('',(1.,0.,-0.)); +#353876 = MANIFOLD_SOLID_BREP('',#353877); +#353877 = CLOSED_SHELL('',(#353878,#353911,#353931,#353951)); +#353878 = ADVANCED_FACE('',(#353879),#353906,.T.); +#353879 = FACE_BOUND('',#353880,.F.); +#353880 = EDGE_LOOP('',(#353881,#353891,#353898,#353899)); +#353881 = ORIENTED_EDGE('',*,*,#353882,.T.); +#353882 = EDGE_CURVE('',#353883,#353885,#353887,.T.); +#353883 = VERTEX_POINT('',#353884); +#353884 = CARTESIAN_POINT('',(147.255,-95.25,1.51)); +#353885 = VERTEX_POINT('',#353886); +#353886 = CARTESIAN_POINT('',(147.255,-95.25,1.55)); +#353887 = LINE('',#353888,#353889); +#353888 = CARTESIAN_POINT('',(147.255,-95.25,1.51)); +#353889 = VECTOR('',#353890,1.); +#353890 = DIRECTION('',(0.,0.,1.)); +#353891 = ORIENTED_EDGE('',*,*,#353892,.T.); +#353892 = EDGE_CURVE('',#353885,#353885,#353893,.T.); +#353893 = CIRCLE('',#353894,1.025); +#353894 = AXIS2_PLACEMENT_3D('',#353895,#353896,#353897); +#353895 = CARTESIAN_POINT('',(146.23,-95.25,1.55)); +#353896 = DIRECTION('',(0.,0.,1.)); +#353897 = DIRECTION('',(1.,0.,-0.)); +#353898 = ORIENTED_EDGE('',*,*,#353882,.F.); +#353899 = ORIENTED_EDGE('',*,*,#353900,.F.); +#353900 = EDGE_CURVE('',#353883,#353883,#353901,.T.); +#353901 = CIRCLE('',#353902,1.025); +#353902 = AXIS2_PLACEMENT_3D('',#353903,#353904,#353905); +#353903 = CARTESIAN_POINT('',(146.23,-95.25,1.51)); +#353904 = DIRECTION('',(0.,0.,1.)); +#353905 = DIRECTION('',(1.,0.,-0.)); +#353906 = CYLINDRICAL_SURFACE('',#353907,1.025); +#353907 = AXIS2_PLACEMENT_3D('',#353908,#353909,#353910); +#353908 = CARTESIAN_POINT('',(146.23,-95.25,1.51)); +#353909 = DIRECTION('',(-0.,-0.,-1.)); +#353910 = DIRECTION('',(1.,0.,-0.)); +#353911 = ADVANCED_FACE('',(#353912,#353915),#353926,.F.); +#353912 = FACE_BOUND('',#353913,.F.); +#353913 = EDGE_LOOP('',(#353914)); +#353914 = ORIENTED_EDGE('',*,*,#353900,.T.); +#353915 = FACE_BOUND('',#353916,.F.); +#353916 = EDGE_LOOP('',(#353917)); +#353917 = ORIENTED_EDGE('',*,*,#353918,.T.); +#353918 = EDGE_CURVE('',#353919,#353919,#353921,.T.); +#353919 = VERTEX_POINT('',#353920); +#353920 = CARTESIAN_POINT('',(146.23,-95.75,1.51)); +#353921 = CIRCLE('',#353922,0.5); +#353922 = AXIS2_PLACEMENT_3D('',#353923,#353924,#353925); +#353923 = CARTESIAN_POINT('',(146.23,-95.25,1.51)); +#353924 = DIRECTION('',(-0.,0.,-1.)); +#353925 = DIRECTION('',(-0.,-1.,0.)); +#353926 = PLANE('',#353927); +#353927 = AXIS2_PLACEMENT_3D('',#353928,#353929,#353930); +#353928 = CARTESIAN_POINT('',(0.,0.,1.51)); +#353929 = DIRECTION('',(0.,0.,1.)); +#353930 = DIRECTION('',(1.,0.,-0.)); +#353931 = ADVANCED_FACE('',(#353932,#353935),#353946,.T.); +#353932 = FACE_BOUND('',#353933,.T.); +#353933 = EDGE_LOOP('',(#353934)); +#353934 = ORIENTED_EDGE('',*,*,#353892,.T.); +#353935 = FACE_BOUND('',#353936,.T.); +#353936 = EDGE_LOOP('',(#353937)); +#353937 = ORIENTED_EDGE('',*,*,#353938,.T.); +#353938 = EDGE_CURVE('',#353939,#353939,#353941,.T.); +#353939 = VERTEX_POINT('',#353940); +#353940 = CARTESIAN_POINT('',(146.23,-95.75,1.55)); +#353941 = CIRCLE('',#353942,0.5); +#353942 = AXIS2_PLACEMENT_3D('',#353943,#353944,#353945); +#353943 = CARTESIAN_POINT('',(146.23,-95.25,1.55)); +#353944 = DIRECTION('',(-0.,0.,-1.)); +#353945 = DIRECTION('',(-0.,-1.,0.)); +#353946 = PLANE('',#353947); +#353947 = AXIS2_PLACEMENT_3D('',#353948,#353949,#353950); +#353948 = CARTESIAN_POINT('',(0.,0.,1.55)); +#353949 = DIRECTION('',(0.,0.,1.)); +#353950 = DIRECTION('',(1.,0.,-0.)); +#353951 = ADVANCED_FACE('',(#353952),#353963,.F.); +#353952 = FACE_BOUND('',#353953,.T.); +#353953 = EDGE_LOOP('',(#353954,#353955,#353961,#353962)); +#353954 = ORIENTED_EDGE('',*,*,#353918,.T.); +#353955 = ORIENTED_EDGE('',*,*,#353956,.T.); +#353956 = EDGE_CURVE('',#353919,#353939,#353957,.T.); +#353957 = LINE('',#353958,#353959); +#353958 = CARTESIAN_POINT('',(146.23,-95.75,-4.6E-02)); +#353959 = VECTOR('',#353960,1.); +#353960 = DIRECTION('',(0.,0.,1.)); +#353961 = ORIENTED_EDGE('',*,*,#353938,.F.); +#353962 = ORIENTED_EDGE('',*,*,#353956,.F.); +#353963 = CYLINDRICAL_SURFACE('',#353964,0.5); +#353964 = AXIS2_PLACEMENT_3D('',#353965,#353966,#353967); +#353965 = CARTESIAN_POINT('',(146.23,-95.25,-4.6E-02)); +#353966 = DIRECTION('',(-0.,-0.,-1.)); +#353967 = DIRECTION('',(-0.,-1.,0.)); +#353968 = MANIFOLD_SOLID_BREP('',#353969); +#353969 = CLOSED_SHELL('',(#353970,#354003,#354023,#354043)); +#353970 = ADVANCED_FACE('',(#353971),#353998,.T.); +#353971 = FACE_BOUND('',#353972,.T.); +#353972 = EDGE_LOOP('',(#353973,#353983,#353990,#353991)); +#353973 = ORIENTED_EDGE('',*,*,#353974,.T.); +#353974 = EDGE_CURVE('',#353975,#353977,#353979,.T.); +#353975 = VERTEX_POINT('',#353976); +#353976 = CARTESIAN_POINT('',(147.255,-95.25,0.)); +#353977 = VERTEX_POINT('',#353978); +#353978 = CARTESIAN_POINT('',(147.255,-95.25,-4.E-02)); +#353979 = LINE('',#353980,#353981); +#353980 = CARTESIAN_POINT('',(147.255,-95.25,0.)); +#353981 = VECTOR('',#353982,1.); +#353982 = DIRECTION('',(0.,0.,-1.)); +#353983 = ORIENTED_EDGE('',*,*,#353984,.T.); +#353984 = EDGE_CURVE('',#353977,#353977,#353985,.T.); +#353985 = CIRCLE('',#353986,1.025); +#353986 = AXIS2_PLACEMENT_3D('',#353987,#353988,#353989); +#353987 = CARTESIAN_POINT('',(146.23,-95.25,-4.E-02)); +#353988 = DIRECTION('',(0.,0.,1.)); +#353989 = DIRECTION('',(1.,0.,-0.)); +#353990 = ORIENTED_EDGE('',*,*,#353974,.F.); +#353991 = ORIENTED_EDGE('',*,*,#353992,.F.); +#353992 = EDGE_CURVE('',#353975,#353975,#353993,.T.); +#353993 = CIRCLE('',#353994,1.025); +#353994 = AXIS2_PLACEMENT_3D('',#353995,#353996,#353997); +#353995 = CARTESIAN_POINT('',(146.23,-95.25,0.)); +#353996 = DIRECTION('',(0.,0.,1.)); +#353997 = DIRECTION('',(1.,0.,-0.)); +#353998 = CYLINDRICAL_SURFACE('',#353999,1.025); +#353999 = AXIS2_PLACEMENT_3D('',#354000,#354001,#354002); +#354000 = CARTESIAN_POINT('',(146.23,-95.25,0.)); +#354001 = DIRECTION('',(0.,0.,1.)); +#354002 = DIRECTION('',(1.,0.,-0.)); +#354003 = ADVANCED_FACE('',(#354004,#354007),#354018,.F.); +#354004 = FACE_BOUND('',#354005,.F.); +#354005 = EDGE_LOOP('',(#354006)); +#354006 = ORIENTED_EDGE('',*,*,#353992,.F.); +#354007 = FACE_BOUND('',#354008,.F.); +#354008 = EDGE_LOOP('',(#354009)); +#354009 = ORIENTED_EDGE('',*,*,#354010,.F.); +#354010 = EDGE_CURVE('',#354011,#354011,#354013,.T.); +#354011 = VERTEX_POINT('',#354012); +#354012 = CARTESIAN_POINT('',(146.23,-95.75,0.)); +#354013 = CIRCLE('',#354014,0.5); +#354014 = AXIS2_PLACEMENT_3D('',#354015,#354016,#354017); +#354015 = CARTESIAN_POINT('',(146.23,-95.25,0.)); +#354016 = DIRECTION('',(-0.,0.,-1.)); +#354017 = DIRECTION('',(-0.,-1.,0.)); +#354018 = PLANE('',#354019); +#354019 = AXIS2_PLACEMENT_3D('',#354020,#354021,#354022); +#354020 = CARTESIAN_POINT('',(0.,0.,0.)); +#354021 = DIRECTION('',(-0.,-0.,-1.)); +#354022 = DIRECTION('',(-1.,0.,0.)); +#354023 = ADVANCED_FACE('',(#354024,#354027),#354038,.T.); +#354024 = FACE_BOUND('',#354025,.T.); +#354025 = EDGE_LOOP('',(#354026)); +#354026 = ORIENTED_EDGE('',*,*,#353984,.F.); +#354027 = FACE_BOUND('',#354028,.T.); +#354028 = EDGE_LOOP('',(#354029)); +#354029 = ORIENTED_EDGE('',*,*,#354030,.F.); +#354030 = EDGE_CURVE('',#354031,#354031,#354033,.T.); +#354031 = VERTEX_POINT('',#354032); +#354032 = CARTESIAN_POINT('',(146.23,-95.75,-4.E-02)); +#354033 = CIRCLE('',#354034,0.5); +#354034 = AXIS2_PLACEMENT_3D('',#354035,#354036,#354037); +#354035 = CARTESIAN_POINT('',(146.23,-95.25,-4.E-02)); +#354036 = DIRECTION('',(-0.,0.,-1.)); +#354037 = DIRECTION('',(-0.,-1.,0.)); +#354038 = PLANE('',#354039); +#354039 = AXIS2_PLACEMENT_3D('',#354040,#354041,#354042); +#354040 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#354041 = DIRECTION('',(-0.,-0.,-1.)); +#354042 = DIRECTION('',(-1.,0.,0.)); +#354043 = ADVANCED_FACE('',(#354044),#354055,.F.); +#354044 = FACE_BOUND('',#354045,.T.); +#354045 = EDGE_LOOP('',(#354046,#354047,#354053,#354054)); +#354046 = ORIENTED_EDGE('',*,*,#354030,.T.); +#354047 = ORIENTED_EDGE('',*,*,#354048,.T.); +#354048 = EDGE_CURVE('',#354031,#354011,#354049,.T.); +#354049 = LINE('',#354050,#354051); +#354050 = CARTESIAN_POINT('',(146.23,-95.75,-4.6E-02)); +#354051 = VECTOR('',#354052,1.); +#354052 = DIRECTION('',(0.,0.,1.)); +#354053 = ORIENTED_EDGE('',*,*,#354010,.F.); +#354054 = ORIENTED_EDGE('',*,*,#354048,.F.); +#354055 = CYLINDRICAL_SURFACE('',#354056,0.5); +#354056 = AXIS2_PLACEMENT_3D('',#354057,#354058,#354059); +#354057 = CARTESIAN_POINT('',(146.23,-95.25,-4.6E-02)); +#354058 = DIRECTION('',(-0.,-0.,-1.)); +#354059 = DIRECTION('',(-0.,-1.,0.)); +#354060 = MANIFOLD_SOLID_BREP('',#354061); +#354061 = CLOSED_SHELL('',(#354062,#354095,#354115,#354135)); +#354062 = ADVANCED_FACE('',(#354063),#354090,.T.); +#354063 = FACE_BOUND('',#354064,.F.); +#354064 = EDGE_LOOP('',(#354065,#354075,#354082,#354083)); +#354065 = ORIENTED_EDGE('',*,*,#354066,.T.); +#354066 = EDGE_CURVE('',#354067,#354069,#354071,.T.); +#354067 = VERTEX_POINT('',#354068); +#354068 = CARTESIAN_POINT('',(146.23,-95.775,-4.E-02)); +#354069 = VERTEX_POINT('',#354070); +#354070 = CARTESIAN_POINT('',(146.23,-95.775,1.55)); +#354071 = LINE('',#354072,#354073); +#354072 = CARTESIAN_POINT('',(146.23,-95.775,-4.E-02)); +#354073 = VECTOR('',#354074,1.); +#354074 = DIRECTION('',(0.,0.,1.)); +#354075 = ORIENTED_EDGE('',*,*,#354076,.T.); +#354076 = EDGE_CURVE('',#354069,#354069,#354077,.T.); +#354077 = CIRCLE('',#354078,0.525); +#354078 = AXIS2_PLACEMENT_3D('',#354079,#354080,#354081); +#354079 = CARTESIAN_POINT('',(146.23,-95.25,1.55)); +#354080 = DIRECTION('',(0.,0.,1.)); +#354081 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#354082 = ORIENTED_EDGE('',*,*,#354066,.F.); +#354083 = ORIENTED_EDGE('',*,*,#354084,.F.); +#354084 = EDGE_CURVE('',#354067,#354067,#354085,.T.); +#354085 = CIRCLE('',#354086,0.525); +#354086 = AXIS2_PLACEMENT_3D('',#354087,#354088,#354089); +#354087 = CARTESIAN_POINT('',(146.23,-95.25,-4.E-02)); +#354088 = DIRECTION('',(0.,0.,1.)); +#354089 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#354090 = CYLINDRICAL_SURFACE('',#354091,0.525); +#354091 = AXIS2_PLACEMENT_3D('',#354092,#354093,#354094); +#354092 = CARTESIAN_POINT('',(146.23,-95.25,-4.E-02)); +#354093 = DIRECTION('',(-0.,-0.,-1.)); +#354094 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#354095 = ADVANCED_FACE('',(#354096,#354099),#354110,.F.); +#354096 = FACE_BOUND('',#354097,.F.); +#354097 = EDGE_LOOP('',(#354098)); +#354098 = ORIENTED_EDGE('',*,*,#354084,.T.); +#354099 = FACE_BOUND('',#354100,.F.); +#354100 = EDGE_LOOP('',(#354101)); +#354101 = ORIENTED_EDGE('',*,*,#354102,.T.); +#354102 = EDGE_CURVE('',#354103,#354103,#354105,.T.); +#354103 = VERTEX_POINT('',#354104); +#354104 = CARTESIAN_POINT('',(146.23,-95.75,-4.E-02)); +#354105 = CIRCLE('',#354106,0.5); +#354106 = AXIS2_PLACEMENT_3D('',#354107,#354108,#354109); +#354107 = CARTESIAN_POINT('',(146.23,-95.25,-4.E-02)); +#354108 = DIRECTION('',(-0.,0.,-1.)); +#354109 = DIRECTION('',(-0.,-1.,0.)); +#354110 = PLANE('',#354111); +#354111 = AXIS2_PLACEMENT_3D('',#354112,#354113,#354114); +#354112 = CARTESIAN_POINT('',(146.23,-95.775,-4.E-02)); +#354113 = DIRECTION('',(0.,0.,1.)); +#354114 = DIRECTION('',(1.,0.,-0.)); +#354115 = ADVANCED_FACE('',(#354116,#354119),#354130,.T.); +#354116 = FACE_BOUND('',#354117,.T.); +#354117 = EDGE_LOOP('',(#354118)); +#354118 = ORIENTED_EDGE('',*,*,#354076,.T.); +#354119 = FACE_BOUND('',#354120,.T.); +#354120 = EDGE_LOOP('',(#354121)); +#354121 = ORIENTED_EDGE('',*,*,#354122,.T.); +#354122 = EDGE_CURVE('',#354123,#354123,#354125,.T.); +#354123 = VERTEX_POINT('',#354124); +#354124 = CARTESIAN_POINT('',(146.23,-95.75,1.55)); +#354125 = CIRCLE('',#354126,0.5); +#354126 = AXIS2_PLACEMENT_3D('',#354127,#354128,#354129); +#354127 = CARTESIAN_POINT('',(146.23,-95.25,1.55)); +#354128 = DIRECTION('',(-0.,0.,-1.)); +#354129 = DIRECTION('',(-0.,-1.,0.)); +#354130 = PLANE('',#354131); +#354131 = AXIS2_PLACEMENT_3D('',#354132,#354133,#354134); +#354132 = CARTESIAN_POINT('',(146.23,-95.775,1.55)); +#354133 = DIRECTION('',(0.,0.,1.)); +#354134 = DIRECTION('',(1.,0.,-0.)); +#354135 = ADVANCED_FACE('',(#354136),#354147,.F.); +#354136 = FACE_BOUND('',#354137,.T.); +#354137 = EDGE_LOOP('',(#354138,#354139,#354145,#354146)); +#354138 = ORIENTED_EDGE('',*,*,#354102,.T.); +#354139 = ORIENTED_EDGE('',*,*,#354140,.T.); +#354140 = EDGE_CURVE('',#354103,#354123,#354141,.T.); +#354141 = LINE('',#354142,#354143); +#354142 = CARTESIAN_POINT('',(146.23,-95.75,-4.6E-02)); +#354143 = VECTOR('',#354144,1.); +#354144 = DIRECTION('',(0.,0.,1.)); +#354145 = ORIENTED_EDGE('',*,*,#354122,.F.); +#354146 = ORIENTED_EDGE('',*,*,#354140,.F.); +#354147 = CYLINDRICAL_SURFACE('',#354148,0.5); +#354148 = AXIS2_PLACEMENT_3D('',#354149,#354150,#354151); +#354149 = CARTESIAN_POINT('',(146.23,-95.25,-4.6E-02)); +#354150 = DIRECTION('',(-0.,-0.,-1.)); +#354151 = DIRECTION('',(-0.,-1.,0.)); +#354152 = MANIFOLD_SOLID_BREP('',#354153); +#354153 = CLOSED_SHELL('',(#354154,#354196,#354227,#354260,#354291, + #354324,#354355,#354388,#354410,#354426)); +#354154 = ADVANCED_FACE('',(#354155),#354191,.T.); +#354155 = FACE_BOUND('',#354156,.T.); +#354156 = EDGE_LOOP('',(#354157,#354167,#354176,#354184)); +#354157 = ORIENTED_EDGE('',*,*,#354158,.T.); +#354158 = EDGE_CURVE('',#354159,#354161,#354163,.T.); +#354159 = VERTEX_POINT('',#354160); +#354160 = CARTESIAN_POINT('',(127.43,-154.135,1.51)); +#354161 = VERTEX_POINT('',#354162); +#354162 = CARTESIAN_POINT('',(127.43,-154.135,1.55)); +#354163 = LINE('',#354164,#354165); +#354164 = CARTESIAN_POINT('',(127.43,-154.135,1.51)); +#354165 = VECTOR('',#354166,1.); +#354166 = DIRECTION('',(0.,0.,1.)); +#354167 = ORIENTED_EDGE('',*,*,#354168,.T.); +#354168 = EDGE_CURVE('',#354161,#354169,#354171,.T.); +#354169 = VERTEX_POINT('',#354170); +#354170 = CARTESIAN_POINT('',(127.565,-154.,1.55)); +#354171 = CIRCLE('',#354172,0.135001418495); +#354172 = AXIS2_PLACEMENT_3D('',#354173,#354174,#354175); +#354173 = CARTESIAN_POINT('',(127.56500141848,-154.1350014184,1.55)); +#354174 = DIRECTION('',(0.,0.,-1.)); +#354175 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#354176 = ORIENTED_EDGE('',*,*,#354177,.F.); +#354177 = EDGE_CURVE('',#354178,#354169,#354180,.T.); +#354178 = VERTEX_POINT('',#354179); +#354179 = CARTESIAN_POINT('',(127.565,-154.,1.51)); +#354180 = LINE('',#354181,#354182); +#354181 = CARTESIAN_POINT('',(127.565,-154.,1.51)); +#354182 = VECTOR('',#354183,1.); +#354183 = DIRECTION('',(0.,0.,1.)); +#354184 = ORIENTED_EDGE('',*,*,#354185,.F.); +#354185 = EDGE_CURVE('',#354159,#354178,#354186,.T.); +#354186 = CIRCLE('',#354187,0.135001418495); +#354187 = AXIS2_PLACEMENT_3D('',#354188,#354189,#354190); +#354188 = CARTESIAN_POINT('',(127.56500141848,-154.1350014184,1.51)); +#354189 = DIRECTION('',(0.,0.,-1.)); +#354190 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#354191 = CYLINDRICAL_SURFACE('',#354192,0.135001418495); +#354192 = AXIS2_PLACEMENT_3D('',#354193,#354194,#354195); +#354193 = CARTESIAN_POINT('',(127.56500141848,-154.1350014184,1.51)); +#354194 = DIRECTION('',(0.,0.,-1.)); +#354195 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#354196 = ADVANCED_FACE('',(#354197),#354222,.T.); +#354197 = FACE_BOUND('',#354198,.T.); +#354198 = EDGE_LOOP('',(#354199,#354200,#354208,#354216)); +#354199 = ORIENTED_EDGE('',*,*,#354177,.T.); +#354200 = ORIENTED_EDGE('',*,*,#354201,.T.); +#354201 = EDGE_CURVE('',#354169,#354202,#354204,.T.); +#354202 = VERTEX_POINT('',#354203); +#354203 = CARTESIAN_POINT('',(127.935,-154.,1.55)); +#354204 = LINE('',#354205,#354206); +#354205 = CARTESIAN_POINT('',(127.565,-154.,1.55)); +#354206 = VECTOR('',#354207,1.); +#354207 = DIRECTION('',(1.,0.,0.)); +#354208 = ORIENTED_EDGE('',*,*,#354209,.F.); +#354209 = EDGE_CURVE('',#354210,#354202,#354212,.T.); +#354210 = VERTEX_POINT('',#354211); +#354211 = CARTESIAN_POINT('',(127.935,-154.,1.51)); +#354212 = LINE('',#354213,#354214); +#354213 = CARTESIAN_POINT('',(127.935,-154.,1.51)); +#354214 = VECTOR('',#354215,1.); +#354215 = DIRECTION('',(0.,0.,1.)); +#354216 = ORIENTED_EDGE('',*,*,#354217,.F.); +#354217 = EDGE_CURVE('',#354178,#354210,#354218,.T.); +#354218 = LINE('',#354219,#354220); +#354219 = CARTESIAN_POINT('',(127.565,-154.,1.51)); +#354220 = VECTOR('',#354221,1.); +#354221 = DIRECTION('',(1.,0.,0.)); +#354222 = PLANE('',#354223); +#354223 = AXIS2_PLACEMENT_3D('',#354224,#354225,#354226); +#354224 = CARTESIAN_POINT('',(127.565,-154.,1.51)); +#354225 = DIRECTION('',(0.,1.,0.)); +#354226 = DIRECTION('',(1.,0.,0.)); +#354227 = ADVANCED_FACE('',(#354228),#354255,.T.); +#354228 = FACE_BOUND('',#354229,.T.); +#354229 = EDGE_LOOP('',(#354230,#354231,#354240,#354248)); +#354230 = ORIENTED_EDGE('',*,*,#354209,.T.); +#354231 = ORIENTED_EDGE('',*,*,#354232,.T.); +#354232 = EDGE_CURVE('',#354202,#354233,#354235,.T.); +#354233 = VERTEX_POINT('',#354234); +#354234 = CARTESIAN_POINT('',(128.07,-154.135,1.55)); +#354235 = CIRCLE('',#354236,0.135001418495); +#354236 = AXIS2_PLACEMENT_3D('',#354237,#354238,#354239); +#354237 = CARTESIAN_POINT('',(127.93499858151,-154.1350014184,1.55)); +#354238 = DIRECTION('',(0.,0.,-1.)); +#354239 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#354240 = ORIENTED_EDGE('',*,*,#354241,.F.); +#354241 = EDGE_CURVE('',#354242,#354233,#354244,.T.); +#354242 = VERTEX_POINT('',#354243); +#354243 = CARTESIAN_POINT('',(128.07,-154.135,1.51)); +#354244 = LINE('',#354245,#354246); +#354245 = CARTESIAN_POINT('',(128.07,-154.135,1.51)); +#354246 = VECTOR('',#354247,1.); +#354247 = DIRECTION('',(0.,0.,1.)); +#354248 = ORIENTED_EDGE('',*,*,#354249,.F.); +#354249 = EDGE_CURVE('',#354210,#354242,#354250,.T.); +#354250 = CIRCLE('',#354251,0.135001418495); +#354251 = AXIS2_PLACEMENT_3D('',#354252,#354253,#354254); +#354252 = CARTESIAN_POINT('',(127.93499858151,-154.1350014184,1.51)); +#354253 = DIRECTION('',(0.,0.,-1.)); +#354254 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#354255 = CYLINDRICAL_SURFACE('',#354256,0.135001418495); +#354256 = AXIS2_PLACEMENT_3D('',#354257,#354258,#354259); +#354257 = CARTESIAN_POINT('',(127.93499858151,-154.1350014184,1.51)); +#354258 = DIRECTION('',(0.,0.,-1.)); +#354259 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#354260 = ADVANCED_FACE('',(#354261),#354286,.T.); +#354261 = FACE_BOUND('',#354262,.T.); +#354262 = EDGE_LOOP('',(#354263,#354264,#354272,#354280)); +#354263 = ORIENTED_EDGE('',*,*,#354241,.T.); +#354264 = ORIENTED_EDGE('',*,*,#354265,.T.); +#354265 = EDGE_CURVE('',#354233,#354266,#354268,.T.); +#354266 = VERTEX_POINT('',#354267); +#354267 = CARTESIAN_POINT('',(128.07,-154.405,1.55)); +#354268 = LINE('',#354269,#354270); +#354269 = CARTESIAN_POINT('',(128.07,-154.135,1.55)); +#354270 = VECTOR('',#354271,1.); +#354271 = DIRECTION('',(0.,-1.,0.)); +#354272 = ORIENTED_EDGE('',*,*,#354273,.F.); +#354273 = EDGE_CURVE('',#354274,#354266,#354276,.T.); +#354274 = VERTEX_POINT('',#354275); +#354275 = CARTESIAN_POINT('',(128.07,-154.405,1.51)); +#354276 = LINE('',#354277,#354278); +#354277 = CARTESIAN_POINT('',(128.07,-154.405,1.51)); +#354278 = VECTOR('',#354279,1.); +#354279 = DIRECTION('',(0.,0.,1.)); +#354280 = ORIENTED_EDGE('',*,*,#354281,.F.); +#354281 = EDGE_CURVE('',#354242,#354274,#354282,.T.); +#354282 = LINE('',#354283,#354284); +#354283 = CARTESIAN_POINT('',(128.07,-154.135,1.51)); +#354284 = VECTOR('',#354285,1.); +#354285 = DIRECTION('',(0.,-1.,0.)); +#354286 = PLANE('',#354287); +#354287 = AXIS2_PLACEMENT_3D('',#354288,#354289,#354290); +#354288 = CARTESIAN_POINT('',(128.07,-154.135,1.51)); +#354289 = DIRECTION('',(1.,0.,-0.)); +#354290 = DIRECTION('',(0.,-1.,0.)); +#354291 = ADVANCED_FACE('',(#354292),#354319,.T.); +#354292 = FACE_BOUND('',#354293,.T.); +#354293 = EDGE_LOOP('',(#354294,#354295,#354304,#354312)); +#354294 = ORIENTED_EDGE('',*,*,#354273,.T.); +#354295 = ORIENTED_EDGE('',*,*,#354296,.T.); +#354296 = EDGE_CURVE('',#354266,#354297,#354299,.T.); +#354297 = VERTEX_POINT('',#354298); +#354298 = CARTESIAN_POINT('',(127.935,-154.54,1.55)); +#354299 = CIRCLE('',#354300,0.135001418495); +#354300 = AXIS2_PLACEMENT_3D('',#354301,#354302,#354303); +#354301 = CARTESIAN_POINT('',(127.93499858151,-154.4049985815,1.55)); +#354302 = DIRECTION('',(0.,0.,-1.)); +#354303 = DIRECTION('',(0.999999999945,-1.050720630577E-05,0.)); +#354304 = ORIENTED_EDGE('',*,*,#354305,.F.); +#354305 = EDGE_CURVE('',#354306,#354297,#354308,.T.); +#354306 = VERTEX_POINT('',#354307); +#354307 = CARTESIAN_POINT('',(127.935,-154.54,1.51)); +#354308 = LINE('',#354309,#354310); +#354309 = CARTESIAN_POINT('',(127.935,-154.54,1.51)); +#354310 = VECTOR('',#354311,1.); +#354311 = DIRECTION('',(0.,0.,1.)); +#354312 = ORIENTED_EDGE('',*,*,#354313,.F.); +#354313 = EDGE_CURVE('',#354274,#354306,#354314,.T.); +#354314 = CIRCLE('',#354315,0.135001418495); +#354315 = AXIS2_PLACEMENT_3D('',#354316,#354317,#354318); +#354316 = CARTESIAN_POINT('',(127.93499858151,-154.4049985815,1.51)); +#354317 = DIRECTION('',(0.,0.,-1.)); +#354318 = DIRECTION('',(0.999999999945,-1.050720630577E-05,0.)); +#354319 = CYLINDRICAL_SURFACE('',#354320,0.135001418495); +#354320 = AXIS2_PLACEMENT_3D('',#354321,#354322,#354323); +#354321 = CARTESIAN_POINT('',(127.93499858151,-154.4049985815,1.51)); +#354322 = DIRECTION('',(0.,0.,-1.)); +#354323 = DIRECTION('',(0.999999999945,-1.050720630577E-05,0.)); +#354324 = ADVANCED_FACE('',(#354325),#354350,.T.); +#354325 = FACE_BOUND('',#354326,.T.); +#354326 = EDGE_LOOP('',(#354327,#354328,#354336,#354344)); +#354327 = ORIENTED_EDGE('',*,*,#354305,.T.); +#354328 = ORIENTED_EDGE('',*,*,#354329,.T.); +#354329 = EDGE_CURVE('',#354297,#354330,#354332,.T.); +#354330 = VERTEX_POINT('',#354331); +#354331 = CARTESIAN_POINT('',(127.565,-154.54,1.55)); +#354332 = LINE('',#354333,#354334); +#354333 = CARTESIAN_POINT('',(127.935,-154.54,1.55)); +#354334 = VECTOR('',#354335,1.); +#354335 = DIRECTION('',(-1.,0.,0.)); +#354336 = ORIENTED_EDGE('',*,*,#354337,.F.); +#354337 = EDGE_CURVE('',#354338,#354330,#354340,.T.); +#354338 = VERTEX_POINT('',#354339); +#354339 = CARTESIAN_POINT('',(127.565,-154.54,1.51)); +#354340 = LINE('',#354341,#354342); +#354341 = CARTESIAN_POINT('',(127.565,-154.54,1.51)); +#354342 = VECTOR('',#354343,1.); +#354343 = DIRECTION('',(0.,0.,1.)); +#354344 = ORIENTED_EDGE('',*,*,#354345,.F.); +#354345 = EDGE_CURVE('',#354306,#354338,#354346,.T.); +#354346 = LINE('',#354347,#354348); +#354347 = CARTESIAN_POINT('',(127.935,-154.54,1.51)); +#354348 = VECTOR('',#354349,1.); +#354349 = DIRECTION('',(-1.,0.,0.)); +#354350 = PLANE('',#354351); +#354351 = AXIS2_PLACEMENT_3D('',#354352,#354353,#354354); +#354352 = CARTESIAN_POINT('',(127.935,-154.54,1.51)); +#354353 = DIRECTION('',(0.,-1.,0.)); +#354354 = DIRECTION('',(-1.,0.,0.)); +#354355 = ADVANCED_FACE('',(#354356),#354383,.T.); +#354356 = FACE_BOUND('',#354357,.T.); +#354357 = EDGE_LOOP('',(#354358,#354359,#354368,#354376)); +#354358 = ORIENTED_EDGE('',*,*,#354337,.T.); +#354359 = ORIENTED_EDGE('',*,*,#354360,.T.); +#354360 = EDGE_CURVE('',#354330,#354361,#354363,.T.); +#354361 = VERTEX_POINT('',#354362); +#354362 = CARTESIAN_POINT('',(127.43,-154.405,1.55)); +#354363 = CIRCLE('',#354364,0.135001418495); +#354364 = AXIS2_PLACEMENT_3D('',#354365,#354366,#354367); +#354365 = CARTESIAN_POINT('',(127.56500141848,-154.4049985815,1.55)); +#354366 = DIRECTION('',(0.,0.,-1.)); +#354367 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#354368 = ORIENTED_EDGE('',*,*,#354369,.F.); +#354369 = EDGE_CURVE('',#354370,#354361,#354372,.T.); +#354370 = VERTEX_POINT('',#354371); +#354371 = CARTESIAN_POINT('',(127.43,-154.405,1.51)); +#354372 = LINE('',#354373,#354374); +#354373 = CARTESIAN_POINT('',(127.43,-154.405,1.51)); +#354374 = VECTOR('',#354375,1.); +#354375 = DIRECTION('',(0.,0.,1.)); +#354376 = ORIENTED_EDGE('',*,*,#354377,.F.); +#354377 = EDGE_CURVE('',#354338,#354370,#354378,.T.); +#354378 = CIRCLE('',#354379,0.135001418495); +#354379 = AXIS2_PLACEMENT_3D('',#354380,#354381,#354382); +#354380 = CARTESIAN_POINT('',(127.56500141848,-154.4049985815,1.51)); +#354381 = DIRECTION('',(0.,0.,-1.)); +#354382 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#354383 = CYLINDRICAL_SURFACE('',#354384,0.135001418495); +#354384 = AXIS2_PLACEMENT_3D('',#354385,#354386,#354387); +#354385 = CARTESIAN_POINT('',(127.56500141848,-154.4049985815,1.51)); +#354386 = DIRECTION('',(0.,0.,-1.)); +#354387 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#354388 = ADVANCED_FACE('',(#354389),#354405,.T.); +#354389 = FACE_BOUND('',#354390,.T.); +#354390 = EDGE_LOOP('',(#354391,#354392,#354398,#354399)); +#354391 = ORIENTED_EDGE('',*,*,#354369,.T.); +#354392 = ORIENTED_EDGE('',*,*,#354393,.T.); +#354393 = EDGE_CURVE('',#354361,#354161,#354394,.T.); +#354394 = LINE('',#354395,#354396); +#354395 = CARTESIAN_POINT('',(127.43,-154.405,1.55)); +#354396 = VECTOR('',#354397,1.); +#354397 = DIRECTION('',(0.,1.,0.)); +#354398 = ORIENTED_EDGE('',*,*,#354158,.F.); +#354399 = ORIENTED_EDGE('',*,*,#354400,.F.); +#354400 = EDGE_CURVE('',#354370,#354159,#354401,.T.); +#354401 = LINE('',#354402,#354403); +#354402 = CARTESIAN_POINT('',(127.43,-154.405,1.51)); +#354403 = VECTOR('',#354404,1.); +#354404 = DIRECTION('',(0.,1.,0.)); +#354405 = PLANE('',#354406); +#354406 = AXIS2_PLACEMENT_3D('',#354407,#354408,#354409); +#354407 = CARTESIAN_POINT('',(127.43,-154.405,1.51)); +#354408 = DIRECTION('',(-1.,0.,0.)); +#354409 = DIRECTION('',(0.,1.,0.)); +#354410 = ADVANCED_FACE('',(#354411),#354421,.F.); +#354411 = FACE_BOUND('',#354412,.T.); +#354412 = EDGE_LOOP('',(#354413,#354414,#354415,#354416,#354417,#354418, + #354419,#354420)); +#354413 = ORIENTED_EDGE('',*,*,#354185,.T.); +#354414 = ORIENTED_EDGE('',*,*,#354217,.T.); +#354415 = ORIENTED_EDGE('',*,*,#354249,.T.); +#354416 = ORIENTED_EDGE('',*,*,#354281,.T.); +#354417 = ORIENTED_EDGE('',*,*,#354313,.T.); +#354418 = ORIENTED_EDGE('',*,*,#354345,.T.); +#354419 = ORIENTED_EDGE('',*,*,#354377,.T.); +#354420 = ORIENTED_EDGE('',*,*,#354400,.T.); +#354421 = PLANE('',#354422); +#354422 = AXIS2_PLACEMENT_3D('',#354423,#354424,#354425); +#354423 = CARTESIAN_POINT('',(0.,0.,1.51)); +#354424 = DIRECTION('',(0.,0.,1.)); +#354425 = DIRECTION('',(1.,0.,-0.)); +#354426 = ADVANCED_FACE('',(#354427),#354437,.T.); +#354427 = FACE_BOUND('',#354428,.F.); +#354428 = EDGE_LOOP('',(#354429,#354430,#354431,#354432,#354433,#354434, + #354435,#354436)); +#354429 = ORIENTED_EDGE('',*,*,#354168,.T.); +#354430 = ORIENTED_EDGE('',*,*,#354201,.T.); +#354431 = ORIENTED_EDGE('',*,*,#354232,.T.); +#354432 = ORIENTED_EDGE('',*,*,#354265,.T.); +#354433 = ORIENTED_EDGE('',*,*,#354296,.T.); +#354434 = ORIENTED_EDGE('',*,*,#354329,.T.); +#354435 = ORIENTED_EDGE('',*,*,#354360,.T.); +#354436 = ORIENTED_EDGE('',*,*,#354393,.T.); +#354437 = PLANE('',#354438); +#354438 = AXIS2_PLACEMENT_3D('',#354439,#354440,#354441); +#354439 = CARTESIAN_POINT('',(0.,0.,1.55)); +#354440 = DIRECTION('',(0.,0.,1.)); +#354441 = DIRECTION('',(1.,0.,-0.)); +#354442 = MANIFOLD_SOLID_BREP('',#354443); +#354443 = CLOSED_SHELL('',(#354444,#354486,#354517,#354550,#354581, + #354614,#354645,#354678,#354700,#354716)); +#354444 = ADVANCED_FACE('',(#354445),#354481,.T.); +#354445 = FACE_BOUND('',#354446,.T.); +#354446 = EDGE_LOOP('',(#354447,#354457,#354466,#354474)); +#354447 = ORIENTED_EDGE('',*,*,#354448,.T.); +#354448 = EDGE_CURVE('',#354449,#354451,#354453,.T.); +#354449 = VERTEX_POINT('',#354450); +#354450 = CARTESIAN_POINT('',(137.6,-152.405,1.51)); +#354451 = VERTEX_POINT('',#354452); +#354452 = CARTESIAN_POINT('',(137.6,-152.405,1.55)); +#354453 = LINE('',#354454,#354455); +#354454 = CARTESIAN_POINT('',(137.6,-152.405,1.51)); +#354455 = VECTOR('',#354456,1.); +#354456 = DIRECTION('',(0.,0.,1.)); +#354457 = ORIENTED_EDGE('',*,*,#354458,.T.); +#354458 = EDGE_CURVE('',#354451,#354459,#354461,.T.); +#354459 = VERTEX_POINT('',#354460); +#354460 = CARTESIAN_POINT('',(137.675,-152.33,1.55)); +#354461 = CIRCLE('',#354462,7.500002932469E-02); +#354462 = AXIS2_PLACEMENT_3D('',#354463,#354464,#354465); +#354463 = CARTESIAN_POINT('',(137.67500002932,-152.4050000293,1.55)); +#354464 = DIRECTION('',(0.,0.,-1.)); +#354465 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354466 = ORIENTED_EDGE('',*,*,#354467,.F.); +#354467 = EDGE_CURVE('',#354468,#354459,#354470,.T.); +#354468 = VERTEX_POINT('',#354469); +#354469 = CARTESIAN_POINT('',(137.675,-152.33,1.51)); +#354470 = LINE('',#354471,#354472); +#354471 = CARTESIAN_POINT('',(137.675,-152.33,1.51)); +#354472 = VECTOR('',#354473,1.); +#354473 = DIRECTION('',(0.,0.,1.)); +#354474 = ORIENTED_EDGE('',*,*,#354475,.F.); +#354475 = EDGE_CURVE('',#354449,#354468,#354476,.T.); +#354476 = CIRCLE('',#354477,7.500002932469E-02); +#354477 = AXIS2_PLACEMENT_3D('',#354478,#354479,#354480); +#354478 = CARTESIAN_POINT('',(137.67500002932,-152.4050000293,1.51)); +#354479 = DIRECTION('',(0.,0.,-1.)); +#354480 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354481 = CYLINDRICAL_SURFACE('',#354482,7.500002932469E-02); +#354482 = AXIS2_PLACEMENT_3D('',#354483,#354484,#354485); +#354483 = CARTESIAN_POINT('',(137.67500002932,-152.4050000293,1.51)); +#354484 = DIRECTION('',(0.,0.,-1.)); +#354485 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354486 = ADVANCED_FACE('',(#354487),#354512,.T.); +#354487 = FACE_BOUND('',#354488,.T.); +#354488 = EDGE_LOOP('',(#354489,#354490,#354498,#354506)); +#354489 = ORIENTED_EDGE('',*,*,#354467,.T.); +#354490 = ORIENTED_EDGE('',*,*,#354491,.T.); +#354491 = EDGE_CURVE('',#354459,#354492,#354494,.T.); +#354492 = VERTEX_POINT('',#354493); +#354493 = CARTESIAN_POINT('',(137.825,-152.33,1.55)); +#354494 = LINE('',#354495,#354496); +#354495 = CARTESIAN_POINT('',(137.675,-152.33,1.55)); +#354496 = VECTOR('',#354497,1.); +#354497 = DIRECTION('',(1.,0.,0.)); +#354498 = ORIENTED_EDGE('',*,*,#354499,.F.); +#354499 = EDGE_CURVE('',#354500,#354492,#354502,.T.); +#354500 = VERTEX_POINT('',#354501); +#354501 = CARTESIAN_POINT('',(137.825,-152.33,1.51)); +#354502 = LINE('',#354503,#354504); +#354503 = CARTESIAN_POINT('',(137.825,-152.33,1.51)); +#354504 = VECTOR('',#354505,1.); +#354505 = DIRECTION('',(0.,0.,1.)); +#354506 = ORIENTED_EDGE('',*,*,#354507,.F.); +#354507 = EDGE_CURVE('',#354468,#354500,#354508,.T.); +#354508 = LINE('',#354509,#354510); +#354509 = CARTESIAN_POINT('',(137.675,-152.33,1.51)); +#354510 = VECTOR('',#354511,1.); +#354511 = DIRECTION('',(1.,0.,0.)); +#354512 = PLANE('',#354513); +#354513 = AXIS2_PLACEMENT_3D('',#354514,#354515,#354516); +#354514 = CARTESIAN_POINT('',(137.675,-152.33,1.51)); +#354515 = DIRECTION('',(0.,1.,0.)); +#354516 = DIRECTION('',(1.,0.,0.)); +#354517 = ADVANCED_FACE('',(#354518),#354545,.T.); +#354518 = FACE_BOUND('',#354519,.T.); +#354519 = EDGE_LOOP('',(#354520,#354521,#354530,#354538)); +#354520 = ORIENTED_EDGE('',*,*,#354499,.T.); +#354521 = ORIENTED_EDGE('',*,*,#354522,.T.); +#354522 = EDGE_CURVE('',#354492,#354523,#354525,.T.); +#354523 = VERTEX_POINT('',#354524); +#354524 = CARTESIAN_POINT('',(137.9,-152.405,1.55)); +#354525 = CIRCLE('',#354526,7.500002932469E-02); +#354526 = AXIS2_PLACEMENT_3D('',#354527,#354528,#354529); +#354527 = CARTESIAN_POINT('',(137.82499997067,-152.4050000293,1.55)); +#354528 = DIRECTION('',(0.,0.,-1.)); +#354529 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354530 = ORIENTED_EDGE('',*,*,#354531,.F.); +#354531 = EDGE_CURVE('',#354532,#354523,#354534,.T.); +#354532 = VERTEX_POINT('',#354533); +#354533 = CARTESIAN_POINT('',(137.9,-152.405,1.51)); +#354534 = LINE('',#354535,#354536); +#354535 = CARTESIAN_POINT('',(137.9,-152.405,1.51)); +#354536 = VECTOR('',#354537,1.); +#354537 = DIRECTION('',(0.,0.,1.)); +#354538 = ORIENTED_EDGE('',*,*,#354539,.F.); +#354539 = EDGE_CURVE('',#354500,#354532,#354540,.T.); +#354540 = CIRCLE('',#354541,7.500002932469E-02); +#354541 = AXIS2_PLACEMENT_3D('',#354542,#354543,#354544); +#354542 = CARTESIAN_POINT('',(137.82499997067,-152.4050000293,1.51)); +#354543 = DIRECTION('',(0.,0.,-1.)); +#354544 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354545 = CYLINDRICAL_SURFACE('',#354546,7.500002932469E-02); +#354546 = AXIS2_PLACEMENT_3D('',#354547,#354548,#354549); +#354547 = CARTESIAN_POINT('',(137.82499997067,-152.4050000293,1.51)); +#354548 = DIRECTION('',(0.,0.,-1.)); +#354549 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354550 = ADVANCED_FACE('',(#354551),#354576,.T.); +#354551 = FACE_BOUND('',#354552,.T.); +#354552 = EDGE_LOOP('',(#354553,#354554,#354562,#354570)); +#354553 = ORIENTED_EDGE('',*,*,#354531,.T.); +#354554 = ORIENTED_EDGE('',*,*,#354555,.T.); +#354555 = EDGE_CURVE('',#354523,#354556,#354558,.T.); +#354556 = VERTEX_POINT('',#354557); +#354557 = CARTESIAN_POINT('',(137.9,-153.705,1.55)); +#354558 = LINE('',#354559,#354560); +#354559 = CARTESIAN_POINT('',(137.9,-152.405,1.55)); +#354560 = VECTOR('',#354561,1.); +#354561 = DIRECTION('',(0.,-1.,0.)); +#354562 = ORIENTED_EDGE('',*,*,#354563,.F.); +#354563 = EDGE_CURVE('',#354564,#354556,#354566,.T.); +#354564 = VERTEX_POINT('',#354565); +#354565 = CARTESIAN_POINT('',(137.9,-153.705,1.51)); +#354566 = LINE('',#354567,#354568); +#354567 = CARTESIAN_POINT('',(137.9,-153.705,1.51)); +#354568 = VECTOR('',#354569,1.); +#354569 = DIRECTION('',(0.,0.,1.)); +#354570 = ORIENTED_EDGE('',*,*,#354571,.F.); +#354571 = EDGE_CURVE('',#354532,#354564,#354572,.T.); +#354572 = LINE('',#354573,#354574); +#354573 = CARTESIAN_POINT('',(137.9,-152.405,1.51)); +#354574 = VECTOR('',#354575,1.); +#354575 = DIRECTION('',(0.,-1.,0.)); +#354576 = PLANE('',#354577); +#354577 = AXIS2_PLACEMENT_3D('',#354578,#354579,#354580); +#354578 = CARTESIAN_POINT('',(137.9,-152.405,1.51)); +#354579 = DIRECTION('',(1.,0.,-0.)); +#354580 = DIRECTION('',(0.,-1.,0.)); +#354581 = ADVANCED_FACE('',(#354582),#354609,.T.); +#354582 = FACE_BOUND('',#354583,.T.); +#354583 = EDGE_LOOP('',(#354584,#354585,#354594,#354602)); +#354584 = ORIENTED_EDGE('',*,*,#354563,.T.); +#354585 = ORIENTED_EDGE('',*,*,#354586,.T.); +#354586 = EDGE_CURVE('',#354556,#354587,#354589,.T.); +#354587 = VERTEX_POINT('',#354588); +#354588 = CARTESIAN_POINT('',(137.825,-153.78,1.55)); +#354589 = CIRCLE('',#354590,7.500002932469E-02); +#354590 = AXIS2_PLACEMENT_3D('',#354591,#354592,#354593); +#354591 = CARTESIAN_POINT('',(137.82499997067,-153.7049999706,1.55)); +#354592 = DIRECTION('',(0.,0.,-1.)); +#354593 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354594 = ORIENTED_EDGE('',*,*,#354595,.F.); +#354595 = EDGE_CURVE('',#354596,#354587,#354598,.T.); +#354596 = VERTEX_POINT('',#354597); +#354597 = CARTESIAN_POINT('',(137.825,-153.78,1.51)); +#354598 = LINE('',#354599,#354600); +#354599 = CARTESIAN_POINT('',(137.825,-153.78,1.51)); +#354600 = VECTOR('',#354601,1.); +#354601 = DIRECTION('',(0.,0.,1.)); +#354602 = ORIENTED_EDGE('',*,*,#354603,.F.); +#354603 = EDGE_CURVE('',#354564,#354596,#354604,.T.); +#354604 = CIRCLE('',#354605,7.500002932469E-02); +#354605 = AXIS2_PLACEMENT_3D('',#354606,#354607,#354608); +#354606 = CARTESIAN_POINT('',(137.82499997067,-153.7049999706,1.51)); +#354607 = DIRECTION('',(0.,0.,-1.)); +#354608 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354609 = CYLINDRICAL_SURFACE('',#354610,7.500002932469E-02); +#354610 = AXIS2_PLACEMENT_3D('',#354611,#354612,#354613); +#354611 = CARTESIAN_POINT('',(137.82499997067,-153.7049999706,1.51)); +#354612 = DIRECTION('',(0.,0.,-1.)); +#354613 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354614 = ADVANCED_FACE('',(#354615),#354640,.T.); +#354615 = FACE_BOUND('',#354616,.T.); +#354616 = EDGE_LOOP('',(#354617,#354618,#354626,#354634)); +#354617 = ORIENTED_EDGE('',*,*,#354595,.T.); +#354618 = ORIENTED_EDGE('',*,*,#354619,.T.); +#354619 = EDGE_CURVE('',#354587,#354620,#354622,.T.); +#354620 = VERTEX_POINT('',#354621); +#354621 = CARTESIAN_POINT('',(137.675,-153.78,1.55)); +#354622 = LINE('',#354623,#354624); +#354623 = CARTESIAN_POINT('',(137.825,-153.78,1.55)); +#354624 = VECTOR('',#354625,1.); +#354625 = DIRECTION('',(-1.,0.,0.)); +#354626 = ORIENTED_EDGE('',*,*,#354627,.F.); +#354627 = EDGE_CURVE('',#354628,#354620,#354630,.T.); +#354628 = VERTEX_POINT('',#354629); +#354629 = CARTESIAN_POINT('',(137.675,-153.78,1.51)); +#354630 = LINE('',#354631,#354632); +#354631 = CARTESIAN_POINT('',(137.675,-153.78,1.51)); +#354632 = VECTOR('',#354633,1.); +#354633 = DIRECTION('',(0.,0.,1.)); +#354634 = ORIENTED_EDGE('',*,*,#354635,.F.); +#354635 = EDGE_CURVE('',#354596,#354628,#354636,.T.); +#354636 = LINE('',#354637,#354638); +#354637 = CARTESIAN_POINT('',(137.825,-153.78,1.51)); +#354638 = VECTOR('',#354639,1.); +#354639 = DIRECTION('',(-1.,0.,0.)); +#354640 = PLANE('',#354641); +#354641 = AXIS2_PLACEMENT_3D('',#354642,#354643,#354644); +#354642 = CARTESIAN_POINT('',(137.825,-153.78,1.51)); +#354643 = DIRECTION('',(0.,-1.,0.)); +#354644 = DIRECTION('',(-1.,0.,0.)); +#354645 = ADVANCED_FACE('',(#354646),#354673,.T.); +#354646 = FACE_BOUND('',#354647,.T.); +#354647 = EDGE_LOOP('',(#354648,#354649,#354658,#354666)); +#354648 = ORIENTED_EDGE('',*,*,#354627,.T.); +#354649 = ORIENTED_EDGE('',*,*,#354650,.T.); +#354650 = EDGE_CURVE('',#354620,#354651,#354653,.T.); +#354651 = VERTEX_POINT('',#354652); +#354652 = CARTESIAN_POINT('',(137.6,-153.705,1.55)); +#354653 = CIRCLE('',#354654,7.500002932469E-02); +#354654 = AXIS2_PLACEMENT_3D('',#354655,#354656,#354657); +#354655 = CARTESIAN_POINT('',(137.67500002932,-153.7049999706,1.55)); +#354656 = DIRECTION('',(0.,0.,-1.)); +#354657 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354658 = ORIENTED_EDGE('',*,*,#354659,.F.); +#354659 = EDGE_CURVE('',#354660,#354651,#354662,.T.); +#354660 = VERTEX_POINT('',#354661); +#354661 = CARTESIAN_POINT('',(137.6,-153.705,1.51)); +#354662 = LINE('',#354663,#354664); +#354663 = CARTESIAN_POINT('',(137.6,-153.705,1.51)); +#354664 = VECTOR('',#354665,1.); +#354665 = DIRECTION('',(0.,0.,1.)); +#354666 = ORIENTED_EDGE('',*,*,#354667,.F.); +#354667 = EDGE_CURVE('',#354628,#354660,#354668,.T.); +#354668 = CIRCLE('',#354669,7.500002932469E-02); +#354669 = AXIS2_PLACEMENT_3D('',#354670,#354671,#354672); +#354670 = CARTESIAN_POINT('',(137.67500002932,-153.7049999706,1.51)); +#354671 = DIRECTION('',(0.,0.,-1.)); +#354672 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354673 = CYLINDRICAL_SURFACE('',#354674,7.500002932469E-02); +#354674 = AXIS2_PLACEMENT_3D('',#354675,#354676,#354677); +#354675 = CARTESIAN_POINT('',(137.67500002932,-153.7049999706,1.51)); +#354676 = DIRECTION('',(0.,0.,-1.)); +#354677 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354678 = ADVANCED_FACE('',(#354679),#354695,.T.); +#354679 = FACE_BOUND('',#354680,.T.); +#354680 = EDGE_LOOP('',(#354681,#354682,#354688,#354689)); +#354681 = ORIENTED_EDGE('',*,*,#354659,.T.); +#354682 = ORIENTED_EDGE('',*,*,#354683,.T.); +#354683 = EDGE_CURVE('',#354651,#354451,#354684,.T.); +#354684 = LINE('',#354685,#354686); +#354685 = CARTESIAN_POINT('',(137.6,-153.705,1.55)); +#354686 = VECTOR('',#354687,1.); +#354687 = DIRECTION('',(0.,1.,0.)); +#354688 = ORIENTED_EDGE('',*,*,#354448,.F.); +#354689 = ORIENTED_EDGE('',*,*,#354690,.F.); +#354690 = EDGE_CURVE('',#354660,#354449,#354691,.T.); +#354691 = LINE('',#354692,#354693); +#354692 = CARTESIAN_POINT('',(137.6,-153.705,1.51)); +#354693 = VECTOR('',#354694,1.); +#354694 = DIRECTION('',(0.,1.,0.)); +#354695 = PLANE('',#354696); +#354696 = AXIS2_PLACEMENT_3D('',#354697,#354698,#354699); +#354697 = CARTESIAN_POINT('',(137.6,-153.705,1.51)); +#354698 = DIRECTION('',(-1.,0.,0.)); +#354699 = DIRECTION('',(0.,1.,0.)); +#354700 = ADVANCED_FACE('',(#354701),#354711,.F.); +#354701 = FACE_BOUND('',#354702,.T.); +#354702 = EDGE_LOOP('',(#354703,#354704,#354705,#354706,#354707,#354708, + #354709,#354710)); +#354703 = ORIENTED_EDGE('',*,*,#354475,.T.); +#354704 = ORIENTED_EDGE('',*,*,#354507,.T.); +#354705 = ORIENTED_EDGE('',*,*,#354539,.T.); +#354706 = ORIENTED_EDGE('',*,*,#354571,.T.); +#354707 = ORIENTED_EDGE('',*,*,#354603,.T.); +#354708 = ORIENTED_EDGE('',*,*,#354635,.T.); +#354709 = ORIENTED_EDGE('',*,*,#354667,.T.); +#354710 = ORIENTED_EDGE('',*,*,#354690,.T.); +#354711 = PLANE('',#354712); +#354712 = AXIS2_PLACEMENT_3D('',#354713,#354714,#354715); +#354713 = CARTESIAN_POINT('',(0.,0.,1.51)); +#354714 = DIRECTION('',(0.,0.,1.)); +#354715 = DIRECTION('',(1.,0.,-0.)); +#354716 = ADVANCED_FACE('',(#354717),#354727,.T.); +#354717 = FACE_BOUND('',#354718,.F.); +#354718 = EDGE_LOOP('',(#354719,#354720,#354721,#354722,#354723,#354724, + #354725,#354726)); +#354719 = ORIENTED_EDGE('',*,*,#354458,.T.); +#354720 = ORIENTED_EDGE('',*,*,#354491,.T.); +#354721 = ORIENTED_EDGE('',*,*,#354522,.T.); +#354722 = ORIENTED_EDGE('',*,*,#354555,.T.); +#354723 = ORIENTED_EDGE('',*,*,#354586,.T.); +#354724 = ORIENTED_EDGE('',*,*,#354619,.T.); +#354725 = ORIENTED_EDGE('',*,*,#354650,.T.); +#354726 = ORIENTED_EDGE('',*,*,#354683,.T.); +#354727 = PLANE('',#354728); +#354728 = AXIS2_PLACEMENT_3D('',#354729,#354730,#354731); +#354729 = CARTESIAN_POINT('',(0.,0.,1.55)); +#354730 = DIRECTION('',(0.,0.,1.)); +#354731 = DIRECTION('',(1.,0.,-0.)); +#354732 = MANIFOLD_SOLID_BREP('',#354733); +#354733 = CLOSED_SHELL('',(#354734,#354776,#354807,#354840,#354871, + #354904,#354935,#354968,#354990,#355006)); +#354734 = ADVANCED_FACE('',(#354735),#354771,.T.); +#354735 = FACE_BOUND('',#354736,.T.); +#354736 = EDGE_LOOP('',(#354737,#354747,#354756,#354764)); +#354737 = ORIENTED_EDGE('',*,*,#354738,.T.); +#354738 = EDGE_CURVE('',#354739,#354741,#354743,.T.); +#354739 = VERTEX_POINT('',#354740); +#354740 = CARTESIAN_POINT('',(136.6,-152.405,1.51)); +#354741 = VERTEX_POINT('',#354742); +#354742 = CARTESIAN_POINT('',(136.6,-152.405,1.55)); +#354743 = LINE('',#354744,#354745); +#354744 = CARTESIAN_POINT('',(136.6,-152.405,1.51)); +#354745 = VECTOR('',#354746,1.); +#354746 = DIRECTION('',(0.,0.,1.)); +#354747 = ORIENTED_EDGE('',*,*,#354748,.T.); +#354748 = EDGE_CURVE('',#354741,#354749,#354751,.T.); +#354749 = VERTEX_POINT('',#354750); +#354750 = CARTESIAN_POINT('',(136.675,-152.33,1.55)); +#354751 = CIRCLE('',#354752,7.500002932469E-02); +#354752 = AXIS2_PLACEMENT_3D('',#354753,#354754,#354755); +#354753 = CARTESIAN_POINT('',(136.67500002932,-152.4050000293,1.55)); +#354754 = DIRECTION('',(0.,0.,-1.)); +#354755 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354756 = ORIENTED_EDGE('',*,*,#354757,.F.); +#354757 = EDGE_CURVE('',#354758,#354749,#354760,.T.); +#354758 = VERTEX_POINT('',#354759); +#354759 = CARTESIAN_POINT('',(136.675,-152.33,1.51)); +#354760 = LINE('',#354761,#354762); +#354761 = CARTESIAN_POINT('',(136.675,-152.33,1.51)); +#354762 = VECTOR('',#354763,1.); +#354763 = DIRECTION('',(0.,0.,1.)); +#354764 = ORIENTED_EDGE('',*,*,#354765,.F.); +#354765 = EDGE_CURVE('',#354739,#354758,#354766,.T.); +#354766 = CIRCLE('',#354767,7.500002932469E-02); +#354767 = AXIS2_PLACEMENT_3D('',#354768,#354769,#354770); +#354768 = CARTESIAN_POINT('',(136.67500002932,-152.4050000293,1.51)); +#354769 = DIRECTION('',(0.,0.,-1.)); +#354770 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354771 = CYLINDRICAL_SURFACE('',#354772,7.500002932469E-02); +#354772 = AXIS2_PLACEMENT_3D('',#354773,#354774,#354775); +#354773 = CARTESIAN_POINT('',(136.67500002932,-152.4050000293,1.51)); +#354774 = DIRECTION('',(0.,0.,-1.)); +#354775 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#354776 = ADVANCED_FACE('',(#354777),#354802,.T.); +#354777 = FACE_BOUND('',#354778,.T.); +#354778 = EDGE_LOOP('',(#354779,#354780,#354788,#354796)); +#354779 = ORIENTED_EDGE('',*,*,#354757,.T.); +#354780 = ORIENTED_EDGE('',*,*,#354781,.T.); +#354781 = EDGE_CURVE('',#354749,#354782,#354784,.T.); +#354782 = VERTEX_POINT('',#354783); +#354783 = CARTESIAN_POINT('',(136.825,-152.33,1.55)); +#354784 = LINE('',#354785,#354786); +#354785 = CARTESIAN_POINT('',(136.675,-152.33,1.55)); +#354786 = VECTOR('',#354787,1.); +#354787 = DIRECTION('',(1.,0.,0.)); +#354788 = ORIENTED_EDGE('',*,*,#354789,.F.); +#354789 = EDGE_CURVE('',#354790,#354782,#354792,.T.); +#354790 = VERTEX_POINT('',#354791); +#354791 = CARTESIAN_POINT('',(136.825,-152.33,1.51)); +#354792 = LINE('',#354793,#354794); +#354793 = CARTESIAN_POINT('',(136.825,-152.33,1.51)); +#354794 = VECTOR('',#354795,1.); +#354795 = DIRECTION('',(0.,0.,1.)); +#354796 = ORIENTED_EDGE('',*,*,#354797,.F.); +#354797 = EDGE_CURVE('',#354758,#354790,#354798,.T.); +#354798 = LINE('',#354799,#354800); +#354799 = CARTESIAN_POINT('',(136.675,-152.33,1.51)); +#354800 = VECTOR('',#354801,1.); +#354801 = DIRECTION('',(1.,0.,0.)); +#354802 = PLANE('',#354803); +#354803 = AXIS2_PLACEMENT_3D('',#354804,#354805,#354806); +#354804 = CARTESIAN_POINT('',(136.675,-152.33,1.51)); +#354805 = DIRECTION('',(0.,1.,0.)); +#354806 = DIRECTION('',(1.,0.,0.)); +#354807 = ADVANCED_FACE('',(#354808),#354835,.T.); +#354808 = FACE_BOUND('',#354809,.T.); +#354809 = EDGE_LOOP('',(#354810,#354811,#354820,#354828)); +#354810 = ORIENTED_EDGE('',*,*,#354789,.T.); +#354811 = ORIENTED_EDGE('',*,*,#354812,.T.); +#354812 = EDGE_CURVE('',#354782,#354813,#354815,.T.); +#354813 = VERTEX_POINT('',#354814); +#354814 = CARTESIAN_POINT('',(136.9,-152.405,1.55)); +#354815 = CIRCLE('',#354816,7.500002932469E-02); +#354816 = AXIS2_PLACEMENT_3D('',#354817,#354818,#354819); +#354817 = CARTESIAN_POINT('',(136.82499997067,-152.4050000293,1.55)); +#354818 = DIRECTION('',(0.,0.,-1.)); +#354819 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354820 = ORIENTED_EDGE('',*,*,#354821,.F.); +#354821 = EDGE_CURVE('',#354822,#354813,#354824,.T.); +#354822 = VERTEX_POINT('',#354823); +#354823 = CARTESIAN_POINT('',(136.9,-152.405,1.51)); +#354824 = LINE('',#354825,#354826); +#354825 = CARTESIAN_POINT('',(136.9,-152.405,1.51)); +#354826 = VECTOR('',#354827,1.); +#354827 = DIRECTION('',(0.,0.,1.)); +#354828 = ORIENTED_EDGE('',*,*,#354829,.F.); +#354829 = EDGE_CURVE('',#354790,#354822,#354830,.T.); +#354830 = CIRCLE('',#354831,7.500002932469E-02); +#354831 = AXIS2_PLACEMENT_3D('',#354832,#354833,#354834); +#354832 = CARTESIAN_POINT('',(136.82499997067,-152.4050000293,1.51)); +#354833 = DIRECTION('',(0.,0.,-1.)); +#354834 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354835 = CYLINDRICAL_SURFACE('',#354836,7.500002932469E-02); +#354836 = AXIS2_PLACEMENT_3D('',#354837,#354838,#354839); +#354837 = CARTESIAN_POINT('',(136.82499997067,-152.4050000293,1.51)); +#354838 = DIRECTION('',(0.,0.,-1.)); +#354839 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#354840 = ADVANCED_FACE('',(#354841),#354866,.T.); +#354841 = FACE_BOUND('',#354842,.T.); +#354842 = EDGE_LOOP('',(#354843,#354844,#354852,#354860)); +#354843 = ORIENTED_EDGE('',*,*,#354821,.T.); +#354844 = ORIENTED_EDGE('',*,*,#354845,.T.); +#354845 = EDGE_CURVE('',#354813,#354846,#354848,.T.); +#354846 = VERTEX_POINT('',#354847); +#354847 = CARTESIAN_POINT('',(136.9,-153.705,1.55)); +#354848 = LINE('',#354849,#354850); +#354849 = CARTESIAN_POINT('',(136.9,-152.405,1.55)); +#354850 = VECTOR('',#354851,1.); +#354851 = DIRECTION('',(0.,-1.,0.)); +#354852 = ORIENTED_EDGE('',*,*,#354853,.F.); +#354853 = EDGE_CURVE('',#354854,#354846,#354856,.T.); +#354854 = VERTEX_POINT('',#354855); +#354855 = CARTESIAN_POINT('',(136.9,-153.705,1.51)); +#354856 = LINE('',#354857,#354858); +#354857 = CARTESIAN_POINT('',(136.9,-153.705,1.51)); +#354858 = VECTOR('',#354859,1.); +#354859 = DIRECTION('',(0.,0.,1.)); +#354860 = ORIENTED_EDGE('',*,*,#354861,.F.); +#354861 = EDGE_CURVE('',#354822,#354854,#354862,.T.); +#354862 = LINE('',#354863,#354864); +#354863 = CARTESIAN_POINT('',(136.9,-152.405,1.51)); +#354864 = VECTOR('',#354865,1.); +#354865 = DIRECTION('',(0.,-1.,0.)); +#354866 = PLANE('',#354867); +#354867 = AXIS2_PLACEMENT_3D('',#354868,#354869,#354870); +#354868 = CARTESIAN_POINT('',(136.9,-152.405,1.51)); +#354869 = DIRECTION('',(1.,0.,-0.)); +#354870 = DIRECTION('',(0.,-1.,0.)); +#354871 = ADVANCED_FACE('',(#354872),#354899,.T.); +#354872 = FACE_BOUND('',#354873,.T.); +#354873 = EDGE_LOOP('',(#354874,#354875,#354884,#354892)); +#354874 = ORIENTED_EDGE('',*,*,#354853,.T.); +#354875 = ORIENTED_EDGE('',*,*,#354876,.T.); +#354876 = EDGE_CURVE('',#354846,#354877,#354879,.T.); +#354877 = VERTEX_POINT('',#354878); +#354878 = CARTESIAN_POINT('',(136.825,-153.78,1.55)); +#354879 = CIRCLE('',#354880,7.500002932469E-02); +#354880 = AXIS2_PLACEMENT_3D('',#354881,#354882,#354883); +#354881 = CARTESIAN_POINT('',(136.82499997067,-153.7049999706,1.55)); +#354882 = DIRECTION('',(0.,0.,-1.)); +#354883 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354884 = ORIENTED_EDGE('',*,*,#354885,.F.); +#354885 = EDGE_CURVE('',#354886,#354877,#354888,.T.); +#354886 = VERTEX_POINT('',#354887); +#354887 = CARTESIAN_POINT('',(136.825,-153.78,1.51)); +#354888 = LINE('',#354889,#354890); +#354889 = CARTESIAN_POINT('',(136.825,-153.78,1.51)); +#354890 = VECTOR('',#354891,1.); +#354891 = DIRECTION('',(0.,0.,1.)); +#354892 = ORIENTED_EDGE('',*,*,#354893,.F.); +#354893 = EDGE_CURVE('',#354854,#354886,#354894,.T.); +#354894 = CIRCLE('',#354895,7.500002932469E-02); +#354895 = AXIS2_PLACEMENT_3D('',#354896,#354897,#354898); +#354896 = CARTESIAN_POINT('',(136.82499997067,-153.7049999706,1.51)); +#354897 = DIRECTION('',(0.,0.,-1.)); +#354898 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354899 = CYLINDRICAL_SURFACE('',#354900,7.500002932469E-02); +#354900 = AXIS2_PLACEMENT_3D('',#354901,#354902,#354903); +#354901 = CARTESIAN_POINT('',(136.82499997067,-153.7049999706,1.51)); +#354902 = DIRECTION('',(0.,0.,-1.)); +#354903 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#354904 = ADVANCED_FACE('',(#354905),#354930,.T.); +#354905 = FACE_BOUND('',#354906,.T.); +#354906 = EDGE_LOOP('',(#354907,#354908,#354916,#354924)); +#354907 = ORIENTED_EDGE('',*,*,#354885,.T.); +#354908 = ORIENTED_EDGE('',*,*,#354909,.T.); +#354909 = EDGE_CURVE('',#354877,#354910,#354912,.T.); +#354910 = VERTEX_POINT('',#354911); +#354911 = CARTESIAN_POINT('',(136.675,-153.78,1.55)); +#354912 = LINE('',#354913,#354914); +#354913 = CARTESIAN_POINT('',(136.825,-153.78,1.55)); +#354914 = VECTOR('',#354915,1.); +#354915 = DIRECTION('',(-1.,0.,0.)); +#354916 = ORIENTED_EDGE('',*,*,#354917,.F.); +#354917 = EDGE_CURVE('',#354918,#354910,#354920,.T.); +#354918 = VERTEX_POINT('',#354919); +#354919 = CARTESIAN_POINT('',(136.675,-153.78,1.51)); +#354920 = LINE('',#354921,#354922); +#354921 = CARTESIAN_POINT('',(136.675,-153.78,1.51)); +#354922 = VECTOR('',#354923,1.); +#354923 = DIRECTION('',(0.,0.,1.)); +#354924 = ORIENTED_EDGE('',*,*,#354925,.F.); +#354925 = EDGE_CURVE('',#354886,#354918,#354926,.T.); +#354926 = LINE('',#354927,#354928); +#354927 = CARTESIAN_POINT('',(136.825,-153.78,1.51)); +#354928 = VECTOR('',#354929,1.); +#354929 = DIRECTION('',(-1.,0.,0.)); +#354930 = PLANE('',#354931); +#354931 = AXIS2_PLACEMENT_3D('',#354932,#354933,#354934); +#354932 = CARTESIAN_POINT('',(136.825,-153.78,1.51)); +#354933 = DIRECTION('',(0.,-1.,0.)); +#354934 = DIRECTION('',(-1.,0.,0.)); +#354935 = ADVANCED_FACE('',(#354936),#354963,.T.); +#354936 = FACE_BOUND('',#354937,.T.); +#354937 = EDGE_LOOP('',(#354938,#354939,#354948,#354956)); +#354938 = ORIENTED_EDGE('',*,*,#354917,.T.); +#354939 = ORIENTED_EDGE('',*,*,#354940,.T.); +#354940 = EDGE_CURVE('',#354910,#354941,#354943,.T.); +#354941 = VERTEX_POINT('',#354942); +#354942 = CARTESIAN_POINT('',(136.6,-153.705,1.55)); +#354943 = CIRCLE('',#354944,7.500002932469E-02); +#354944 = AXIS2_PLACEMENT_3D('',#354945,#354946,#354947); +#354945 = CARTESIAN_POINT('',(136.67500002932,-153.7049999706,1.55)); +#354946 = DIRECTION('',(0.,0.,-1.)); +#354947 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354948 = ORIENTED_EDGE('',*,*,#354949,.F.); +#354949 = EDGE_CURVE('',#354950,#354941,#354952,.T.); +#354950 = VERTEX_POINT('',#354951); +#354951 = CARTESIAN_POINT('',(136.6,-153.705,1.51)); +#354952 = LINE('',#354953,#354954); +#354953 = CARTESIAN_POINT('',(136.6,-153.705,1.51)); +#354954 = VECTOR('',#354955,1.); +#354955 = DIRECTION('',(0.,0.,1.)); +#354956 = ORIENTED_EDGE('',*,*,#354957,.F.); +#354957 = EDGE_CURVE('',#354918,#354950,#354958,.T.); +#354958 = CIRCLE('',#354959,7.500002932469E-02); +#354959 = AXIS2_PLACEMENT_3D('',#354960,#354961,#354962); +#354960 = CARTESIAN_POINT('',(136.67500002932,-153.7049999706,1.51)); +#354961 = DIRECTION('',(0.,0.,-1.)); +#354962 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354963 = CYLINDRICAL_SURFACE('',#354964,7.500002932469E-02); +#354964 = AXIS2_PLACEMENT_3D('',#354965,#354966,#354967); +#354965 = CARTESIAN_POINT('',(136.67500002932,-153.7049999706,1.51)); +#354966 = DIRECTION('',(0.,0.,-1.)); +#354967 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#354968 = ADVANCED_FACE('',(#354969),#354985,.T.); +#354969 = FACE_BOUND('',#354970,.T.); +#354970 = EDGE_LOOP('',(#354971,#354972,#354978,#354979)); +#354971 = ORIENTED_EDGE('',*,*,#354949,.T.); +#354972 = ORIENTED_EDGE('',*,*,#354973,.T.); +#354973 = EDGE_CURVE('',#354941,#354741,#354974,.T.); +#354974 = LINE('',#354975,#354976); +#354975 = CARTESIAN_POINT('',(136.6,-153.705,1.55)); +#354976 = VECTOR('',#354977,1.); +#354977 = DIRECTION('',(0.,1.,0.)); +#354978 = ORIENTED_EDGE('',*,*,#354738,.F.); +#354979 = ORIENTED_EDGE('',*,*,#354980,.F.); +#354980 = EDGE_CURVE('',#354950,#354739,#354981,.T.); +#354981 = LINE('',#354982,#354983); +#354982 = CARTESIAN_POINT('',(136.6,-153.705,1.51)); +#354983 = VECTOR('',#354984,1.); +#354984 = DIRECTION('',(0.,1.,0.)); +#354985 = PLANE('',#354986); +#354986 = AXIS2_PLACEMENT_3D('',#354987,#354988,#354989); +#354987 = CARTESIAN_POINT('',(136.6,-153.705,1.51)); +#354988 = DIRECTION('',(-1.,0.,0.)); +#354989 = DIRECTION('',(0.,1.,0.)); +#354990 = ADVANCED_FACE('',(#354991),#355001,.F.); +#354991 = FACE_BOUND('',#354992,.T.); +#354992 = EDGE_LOOP('',(#354993,#354994,#354995,#354996,#354997,#354998, + #354999,#355000)); +#354993 = ORIENTED_EDGE('',*,*,#354765,.T.); +#354994 = ORIENTED_EDGE('',*,*,#354797,.T.); +#354995 = ORIENTED_EDGE('',*,*,#354829,.T.); +#354996 = ORIENTED_EDGE('',*,*,#354861,.T.); +#354997 = ORIENTED_EDGE('',*,*,#354893,.T.); +#354998 = ORIENTED_EDGE('',*,*,#354925,.T.); +#354999 = ORIENTED_EDGE('',*,*,#354957,.T.); +#355000 = ORIENTED_EDGE('',*,*,#354980,.T.); +#355001 = PLANE('',#355002); +#355002 = AXIS2_PLACEMENT_3D('',#355003,#355004,#355005); +#355003 = CARTESIAN_POINT('',(0.,0.,1.51)); +#355004 = DIRECTION('',(0.,0.,1.)); +#355005 = DIRECTION('',(1.,0.,-0.)); +#355006 = ADVANCED_FACE('',(#355007),#355017,.T.); +#355007 = FACE_BOUND('',#355008,.F.); +#355008 = EDGE_LOOP('',(#355009,#355010,#355011,#355012,#355013,#355014, + #355015,#355016)); +#355009 = ORIENTED_EDGE('',*,*,#354748,.T.); +#355010 = ORIENTED_EDGE('',*,*,#354781,.T.); +#355011 = ORIENTED_EDGE('',*,*,#354812,.T.); +#355012 = ORIENTED_EDGE('',*,*,#354845,.T.); +#355013 = ORIENTED_EDGE('',*,*,#354876,.T.); +#355014 = ORIENTED_EDGE('',*,*,#354909,.T.); +#355015 = ORIENTED_EDGE('',*,*,#354940,.T.); +#355016 = ORIENTED_EDGE('',*,*,#354973,.T.); +#355017 = PLANE('',#355018); +#355018 = AXIS2_PLACEMENT_3D('',#355019,#355020,#355021); +#355019 = CARTESIAN_POINT('',(0.,0.,1.55)); +#355020 = DIRECTION('',(0.,0.,1.)); +#355021 = DIRECTION('',(1.,0.,-0.)); +#355022 = MANIFOLD_SOLID_BREP('',#355023); +#355023 = CLOSED_SHELL('',(#355024,#355066,#355097,#355130,#355161, + #355194,#355225,#355258,#355280,#355296)); +#355024 = ADVANCED_FACE('',(#355025),#355061,.T.); +#355025 = FACE_BOUND('',#355026,.T.); +#355026 = EDGE_LOOP('',(#355027,#355037,#355046,#355054)); +#355027 = ORIENTED_EDGE('',*,*,#355028,.T.); +#355028 = EDGE_CURVE('',#355029,#355031,#355033,.T.); +#355029 = VERTEX_POINT('',#355030); +#355030 = CARTESIAN_POINT('',(127.43,-153.115,1.51)); +#355031 = VERTEX_POINT('',#355032); +#355032 = CARTESIAN_POINT('',(127.43,-153.115,1.55)); +#355033 = LINE('',#355034,#355035); +#355034 = CARTESIAN_POINT('',(127.43,-153.115,1.51)); +#355035 = VECTOR('',#355036,1.); +#355036 = DIRECTION('',(0.,0.,1.)); +#355037 = ORIENTED_EDGE('',*,*,#355038,.T.); +#355038 = EDGE_CURVE('',#355031,#355039,#355041,.T.); +#355039 = VERTEX_POINT('',#355040); +#355040 = CARTESIAN_POINT('',(127.565,-152.98,1.55)); +#355041 = CIRCLE('',#355042,0.135001418495); +#355042 = AXIS2_PLACEMENT_3D('',#355043,#355044,#355045); +#355043 = CARTESIAN_POINT('',(127.56500141848,-153.1150014184,1.55)); +#355044 = DIRECTION('',(0.,0.,-1.)); +#355045 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#355046 = ORIENTED_EDGE('',*,*,#355047,.F.); +#355047 = EDGE_CURVE('',#355048,#355039,#355050,.T.); +#355048 = VERTEX_POINT('',#355049); +#355049 = CARTESIAN_POINT('',(127.565,-152.98,1.51)); +#355050 = LINE('',#355051,#355052); +#355051 = CARTESIAN_POINT('',(127.565,-152.98,1.51)); +#355052 = VECTOR('',#355053,1.); +#355053 = DIRECTION('',(0.,0.,1.)); +#355054 = ORIENTED_EDGE('',*,*,#355055,.F.); +#355055 = EDGE_CURVE('',#355029,#355048,#355056,.T.); +#355056 = CIRCLE('',#355057,0.135001418495); +#355057 = AXIS2_PLACEMENT_3D('',#355058,#355059,#355060); +#355058 = CARTESIAN_POINT('',(127.56500141848,-153.1150014184,1.51)); +#355059 = DIRECTION('',(0.,0.,-1.)); +#355060 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#355061 = CYLINDRICAL_SURFACE('',#355062,0.135001418495); +#355062 = AXIS2_PLACEMENT_3D('',#355063,#355064,#355065); +#355063 = CARTESIAN_POINT('',(127.56500141848,-153.1150014184,1.51)); +#355064 = DIRECTION('',(0.,0.,-1.)); +#355065 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#355066 = ADVANCED_FACE('',(#355067),#355092,.T.); +#355067 = FACE_BOUND('',#355068,.T.); +#355068 = EDGE_LOOP('',(#355069,#355070,#355078,#355086)); +#355069 = ORIENTED_EDGE('',*,*,#355047,.T.); +#355070 = ORIENTED_EDGE('',*,*,#355071,.T.); +#355071 = EDGE_CURVE('',#355039,#355072,#355074,.T.); +#355072 = VERTEX_POINT('',#355073); +#355073 = CARTESIAN_POINT('',(127.935,-152.98,1.55)); +#355074 = LINE('',#355075,#355076); +#355075 = CARTESIAN_POINT('',(127.565,-152.98,1.55)); +#355076 = VECTOR('',#355077,1.); +#355077 = DIRECTION('',(1.,0.,0.)); +#355078 = ORIENTED_EDGE('',*,*,#355079,.F.); +#355079 = EDGE_CURVE('',#355080,#355072,#355082,.T.); +#355080 = VERTEX_POINT('',#355081); +#355081 = CARTESIAN_POINT('',(127.935,-152.98,1.51)); +#355082 = LINE('',#355083,#355084); +#355083 = CARTESIAN_POINT('',(127.935,-152.98,1.51)); +#355084 = VECTOR('',#355085,1.); +#355085 = DIRECTION('',(0.,0.,1.)); +#355086 = ORIENTED_EDGE('',*,*,#355087,.F.); +#355087 = EDGE_CURVE('',#355048,#355080,#355088,.T.); +#355088 = LINE('',#355089,#355090); +#355089 = CARTESIAN_POINT('',(127.565,-152.98,1.51)); +#355090 = VECTOR('',#355091,1.); +#355091 = DIRECTION('',(1.,0.,0.)); +#355092 = PLANE('',#355093); +#355093 = AXIS2_PLACEMENT_3D('',#355094,#355095,#355096); +#355094 = CARTESIAN_POINT('',(127.565,-152.98,1.51)); +#355095 = DIRECTION('',(0.,1.,0.)); +#355096 = DIRECTION('',(1.,0.,0.)); +#355097 = ADVANCED_FACE('',(#355098),#355125,.T.); +#355098 = FACE_BOUND('',#355099,.T.); +#355099 = EDGE_LOOP('',(#355100,#355101,#355110,#355118)); +#355100 = ORIENTED_EDGE('',*,*,#355079,.T.); +#355101 = ORIENTED_EDGE('',*,*,#355102,.T.); +#355102 = EDGE_CURVE('',#355072,#355103,#355105,.T.); +#355103 = VERTEX_POINT('',#355104); +#355104 = CARTESIAN_POINT('',(128.07,-153.115,1.55)); +#355105 = CIRCLE('',#355106,0.135001418495); +#355106 = AXIS2_PLACEMENT_3D('',#355107,#355108,#355109); +#355107 = CARTESIAN_POINT('',(127.93499858151,-153.1150014184,1.55)); +#355108 = DIRECTION('',(0.,0.,-1.)); +#355109 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#355110 = ORIENTED_EDGE('',*,*,#355111,.F.); +#355111 = EDGE_CURVE('',#355112,#355103,#355114,.T.); +#355112 = VERTEX_POINT('',#355113); +#355113 = CARTESIAN_POINT('',(128.07,-153.115,1.51)); +#355114 = LINE('',#355115,#355116); +#355115 = CARTESIAN_POINT('',(128.07,-153.115,1.51)); +#355116 = VECTOR('',#355117,1.); +#355117 = DIRECTION('',(0.,0.,1.)); +#355118 = ORIENTED_EDGE('',*,*,#355119,.F.); +#355119 = EDGE_CURVE('',#355080,#355112,#355120,.T.); +#355120 = CIRCLE('',#355121,0.135001418495); +#355121 = AXIS2_PLACEMENT_3D('',#355122,#355123,#355124); +#355122 = CARTESIAN_POINT('',(127.93499858151,-153.1150014184,1.51)); +#355123 = DIRECTION('',(0.,0.,-1.)); +#355124 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#355125 = CYLINDRICAL_SURFACE('',#355126,0.135001418495); +#355126 = AXIS2_PLACEMENT_3D('',#355127,#355128,#355129); +#355127 = CARTESIAN_POINT('',(127.93499858151,-153.1150014184,1.51)); +#355128 = DIRECTION('',(0.,0.,-1.)); +#355129 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#355130 = ADVANCED_FACE('',(#355131),#355156,.T.); +#355131 = FACE_BOUND('',#355132,.T.); +#355132 = EDGE_LOOP('',(#355133,#355134,#355142,#355150)); +#355133 = ORIENTED_EDGE('',*,*,#355111,.T.); +#355134 = ORIENTED_EDGE('',*,*,#355135,.T.); +#355135 = EDGE_CURVE('',#355103,#355136,#355138,.T.); +#355136 = VERTEX_POINT('',#355137); +#355137 = CARTESIAN_POINT('',(128.07,-153.385,1.55)); +#355138 = LINE('',#355139,#355140); +#355139 = CARTESIAN_POINT('',(128.07,-153.115,1.55)); +#355140 = VECTOR('',#355141,1.); +#355141 = DIRECTION('',(0.,-1.,0.)); +#355142 = ORIENTED_EDGE('',*,*,#355143,.F.); +#355143 = EDGE_CURVE('',#355144,#355136,#355146,.T.); +#355144 = VERTEX_POINT('',#355145); +#355145 = CARTESIAN_POINT('',(128.07,-153.385,1.51)); +#355146 = LINE('',#355147,#355148); +#355147 = CARTESIAN_POINT('',(128.07,-153.385,1.51)); +#355148 = VECTOR('',#355149,1.); +#355149 = DIRECTION('',(0.,0.,1.)); +#355150 = ORIENTED_EDGE('',*,*,#355151,.F.); +#355151 = EDGE_CURVE('',#355112,#355144,#355152,.T.); +#355152 = LINE('',#355153,#355154); +#355153 = CARTESIAN_POINT('',(128.07,-153.115,1.51)); +#355154 = VECTOR('',#355155,1.); +#355155 = DIRECTION('',(0.,-1.,0.)); +#355156 = PLANE('',#355157); +#355157 = AXIS2_PLACEMENT_3D('',#355158,#355159,#355160); +#355158 = CARTESIAN_POINT('',(128.07,-153.115,1.51)); +#355159 = DIRECTION('',(1.,0.,-0.)); +#355160 = DIRECTION('',(0.,-1.,0.)); +#355161 = ADVANCED_FACE('',(#355162),#355189,.T.); +#355162 = FACE_BOUND('',#355163,.T.); +#355163 = EDGE_LOOP('',(#355164,#355165,#355174,#355182)); +#355164 = ORIENTED_EDGE('',*,*,#355143,.T.); +#355165 = ORIENTED_EDGE('',*,*,#355166,.T.); +#355166 = EDGE_CURVE('',#355136,#355167,#355169,.T.); +#355167 = VERTEX_POINT('',#355168); +#355168 = CARTESIAN_POINT('',(127.935,-153.52,1.55)); +#355169 = CIRCLE('',#355170,0.135001418495); +#355170 = AXIS2_PLACEMENT_3D('',#355171,#355172,#355173); +#355171 = CARTESIAN_POINT('',(127.93499858151,-153.3849985815,1.55)); +#355172 = DIRECTION('',(0.,0.,-1.)); +#355173 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#355174 = ORIENTED_EDGE('',*,*,#355175,.F.); +#355175 = EDGE_CURVE('',#355176,#355167,#355178,.T.); +#355176 = VERTEX_POINT('',#355177); +#355177 = CARTESIAN_POINT('',(127.935,-153.52,1.51)); +#355178 = LINE('',#355179,#355180); +#355179 = CARTESIAN_POINT('',(127.935,-153.52,1.51)); +#355180 = VECTOR('',#355181,1.); +#355181 = DIRECTION('',(0.,0.,1.)); +#355182 = ORIENTED_EDGE('',*,*,#355183,.F.); +#355183 = EDGE_CURVE('',#355144,#355176,#355184,.T.); +#355184 = CIRCLE('',#355185,0.135001418495); +#355185 = AXIS2_PLACEMENT_3D('',#355186,#355187,#355188); +#355186 = CARTESIAN_POINT('',(127.93499858151,-153.3849985815,1.51)); +#355187 = DIRECTION('',(0.,0.,-1.)); +#355188 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#355189 = CYLINDRICAL_SURFACE('',#355190,0.135001418495); +#355190 = AXIS2_PLACEMENT_3D('',#355191,#355192,#355193); +#355191 = CARTESIAN_POINT('',(127.93499858151,-153.3849985815,1.51)); +#355192 = DIRECTION('',(0.,0.,-1.)); +#355193 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#355194 = ADVANCED_FACE('',(#355195),#355220,.T.); +#355195 = FACE_BOUND('',#355196,.T.); +#355196 = EDGE_LOOP('',(#355197,#355198,#355206,#355214)); +#355197 = ORIENTED_EDGE('',*,*,#355175,.T.); +#355198 = ORIENTED_EDGE('',*,*,#355199,.T.); +#355199 = EDGE_CURVE('',#355167,#355200,#355202,.T.); +#355200 = VERTEX_POINT('',#355201); +#355201 = CARTESIAN_POINT('',(127.565,-153.52,1.55)); +#355202 = LINE('',#355203,#355204); +#355203 = CARTESIAN_POINT('',(127.935,-153.52,1.55)); +#355204 = VECTOR('',#355205,1.); +#355205 = DIRECTION('',(-1.,0.,0.)); +#355206 = ORIENTED_EDGE('',*,*,#355207,.F.); +#355207 = EDGE_CURVE('',#355208,#355200,#355210,.T.); +#355208 = VERTEX_POINT('',#355209); +#355209 = CARTESIAN_POINT('',(127.565,-153.52,1.51)); +#355210 = LINE('',#355211,#355212); +#355211 = CARTESIAN_POINT('',(127.565,-153.52,1.51)); +#355212 = VECTOR('',#355213,1.); +#355213 = DIRECTION('',(0.,0.,1.)); +#355214 = ORIENTED_EDGE('',*,*,#355215,.F.); +#355215 = EDGE_CURVE('',#355176,#355208,#355216,.T.); +#355216 = LINE('',#355217,#355218); +#355217 = CARTESIAN_POINT('',(127.935,-153.52,1.51)); +#355218 = VECTOR('',#355219,1.); +#355219 = DIRECTION('',(-1.,0.,0.)); +#355220 = PLANE('',#355221); +#355221 = AXIS2_PLACEMENT_3D('',#355222,#355223,#355224); +#355222 = CARTESIAN_POINT('',(127.935,-153.52,1.51)); +#355223 = DIRECTION('',(0.,-1.,0.)); +#355224 = DIRECTION('',(-1.,0.,0.)); +#355225 = ADVANCED_FACE('',(#355226),#355253,.T.); +#355226 = FACE_BOUND('',#355227,.T.); +#355227 = EDGE_LOOP('',(#355228,#355229,#355238,#355246)); +#355228 = ORIENTED_EDGE('',*,*,#355207,.T.); +#355229 = ORIENTED_EDGE('',*,*,#355230,.T.); +#355230 = EDGE_CURVE('',#355200,#355231,#355233,.T.); +#355231 = VERTEX_POINT('',#355232); +#355232 = CARTESIAN_POINT('',(127.43,-153.385,1.55)); +#355233 = CIRCLE('',#355234,0.135001418495); +#355234 = AXIS2_PLACEMENT_3D('',#355235,#355236,#355237); +#355235 = CARTESIAN_POINT('',(127.56500141848,-153.3849985815,1.55)); +#355236 = DIRECTION('',(0.,0.,-1.)); +#355237 = DIRECTION('',(-1.050720662155E-05,-0.999999999945,-0.)); +#355238 = ORIENTED_EDGE('',*,*,#355239,.F.); +#355239 = EDGE_CURVE('',#355240,#355231,#355242,.T.); +#355240 = VERTEX_POINT('',#355241); +#355241 = CARTESIAN_POINT('',(127.43,-153.385,1.51)); +#355242 = LINE('',#355243,#355244); +#355243 = CARTESIAN_POINT('',(127.43,-153.385,1.51)); +#355244 = VECTOR('',#355245,1.); +#355245 = DIRECTION('',(0.,0.,1.)); +#355246 = ORIENTED_EDGE('',*,*,#355247,.F.); +#355247 = EDGE_CURVE('',#355208,#355240,#355248,.T.); +#355248 = CIRCLE('',#355249,0.135001418495); +#355249 = AXIS2_PLACEMENT_3D('',#355250,#355251,#355252); +#355250 = CARTESIAN_POINT('',(127.56500141848,-153.3849985815,1.51)); +#355251 = DIRECTION('',(0.,0.,-1.)); +#355252 = DIRECTION('',(-1.050720662155E-05,-0.999999999945,-0.)); +#355253 = CYLINDRICAL_SURFACE('',#355254,0.135001418495); +#355254 = AXIS2_PLACEMENT_3D('',#355255,#355256,#355257); +#355255 = CARTESIAN_POINT('',(127.56500141848,-153.3849985815,1.51)); +#355256 = DIRECTION('',(0.,0.,-1.)); +#355257 = DIRECTION('',(-1.050720662155E-05,-0.999999999945,-0.)); +#355258 = ADVANCED_FACE('',(#355259),#355275,.T.); +#355259 = FACE_BOUND('',#355260,.T.); +#355260 = EDGE_LOOP('',(#355261,#355262,#355268,#355269)); +#355261 = ORIENTED_EDGE('',*,*,#355239,.T.); +#355262 = ORIENTED_EDGE('',*,*,#355263,.T.); +#355263 = EDGE_CURVE('',#355231,#355031,#355264,.T.); +#355264 = LINE('',#355265,#355266); +#355265 = CARTESIAN_POINT('',(127.43,-153.385,1.55)); +#355266 = VECTOR('',#355267,1.); +#355267 = DIRECTION('',(0.,1.,0.)); +#355268 = ORIENTED_EDGE('',*,*,#355028,.F.); +#355269 = ORIENTED_EDGE('',*,*,#355270,.F.); +#355270 = EDGE_CURVE('',#355240,#355029,#355271,.T.); +#355271 = LINE('',#355272,#355273); +#355272 = CARTESIAN_POINT('',(127.43,-153.385,1.51)); +#355273 = VECTOR('',#355274,1.); +#355274 = DIRECTION('',(0.,1.,0.)); +#355275 = PLANE('',#355276); +#355276 = AXIS2_PLACEMENT_3D('',#355277,#355278,#355279); +#355277 = CARTESIAN_POINT('',(127.43,-153.385,1.51)); +#355278 = DIRECTION('',(-1.,0.,0.)); +#355279 = DIRECTION('',(0.,1.,0.)); +#355280 = ADVANCED_FACE('',(#355281),#355291,.F.); +#355281 = FACE_BOUND('',#355282,.T.); +#355282 = EDGE_LOOP('',(#355283,#355284,#355285,#355286,#355287,#355288, + #355289,#355290)); +#355283 = ORIENTED_EDGE('',*,*,#355055,.T.); +#355284 = ORIENTED_EDGE('',*,*,#355087,.T.); +#355285 = ORIENTED_EDGE('',*,*,#355119,.T.); +#355286 = ORIENTED_EDGE('',*,*,#355151,.T.); +#355287 = ORIENTED_EDGE('',*,*,#355183,.T.); +#355288 = ORIENTED_EDGE('',*,*,#355215,.T.); +#355289 = ORIENTED_EDGE('',*,*,#355247,.T.); +#355290 = ORIENTED_EDGE('',*,*,#355270,.T.); +#355291 = PLANE('',#355292); +#355292 = AXIS2_PLACEMENT_3D('',#355293,#355294,#355295); +#355293 = CARTESIAN_POINT('',(0.,0.,1.51)); +#355294 = DIRECTION('',(0.,0.,1.)); +#355295 = DIRECTION('',(1.,0.,-0.)); +#355296 = ADVANCED_FACE('',(#355297),#355307,.T.); +#355297 = FACE_BOUND('',#355298,.F.); +#355298 = EDGE_LOOP('',(#355299,#355300,#355301,#355302,#355303,#355304, + #355305,#355306)); +#355299 = ORIENTED_EDGE('',*,*,#355038,.T.); +#355300 = ORIENTED_EDGE('',*,*,#355071,.T.); +#355301 = ORIENTED_EDGE('',*,*,#355102,.T.); +#355302 = ORIENTED_EDGE('',*,*,#355135,.T.); +#355303 = ORIENTED_EDGE('',*,*,#355166,.T.); +#355304 = ORIENTED_EDGE('',*,*,#355199,.T.); +#355305 = ORIENTED_EDGE('',*,*,#355230,.T.); +#355306 = ORIENTED_EDGE('',*,*,#355263,.T.); +#355307 = PLANE('',#355308); +#355308 = AXIS2_PLACEMENT_3D('',#355309,#355310,#355311); +#355309 = CARTESIAN_POINT('',(0.,0.,1.55)); +#355310 = DIRECTION('',(0.,0.,1.)); +#355311 = DIRECTION('',(1.,0.,-0.)); +#355312 = MANIFOLD_SOLID_BREP('',#355313); +#355313 = CLOSED_SHELL('',(#355314,#355354,#355385,#355416,#355438, + #355450)); +#355314 = ADVANCED_FACE('',(#355315),#355349,.T.); +#355315 = FACE_BOUND('',#355316,.T.); +#355316 = EDGE_LOOP('',(#355317,#355327,#355335,#355343)); +#355317 = ORIENTED_EDGE('',*,*,#355318,.T.); +#355318 = EDGE_CURVE('',#355319,#355321,#355323,.T.); +#355319 = VERTEX_POINT('',#355320); +#355320 = CARTESIAN_POINT('',(128.5,-80.34,1.51)); +#355321 = VERTEX_POINT('',#355322); +#355322 = CARTESIAN_POINT('',(128.5,-80.34,1.55)); +#355323 = LINE('',#355324,#355325); +#355324 = CARTESIAN_POINT('',(128.5,-80.34,1.51)); +#355325 = VECTOR('',#355326,1.); +#355326 = DIRECTION('',(0.,0.,1.)); +#355327 = ORIENTED_EDGE('',*,*,#355328,.T.); +#355328 = EDGE_CURVE('',#355321,#355329,#355331,.T.); +#355329 = VERTEX_POINT('',#355330); +#355330 = CARTESIAN_POINT('',(128.5,-79.44,1.55)); +#355331 = LINE('',#355332,#355333); +#355332 = CARTESIAN_POINT('',(128.5,-80.34,1.55)); +#355333 = VECTOR('',#355334,1.); +#355334 = DIRECTION('',(0.,1.,0.)); +#355335 = ORIENTED_EDGE('',*,*,#355336,.F.); +#355336 = EDGE_CURVE('',#355337,#355329,#355339,.T.); +#355337 = VERTEX_POINT('',#355338); +#355338 = CARTESIAN_POINT('',(128.5,-79.44,1.51)); +#355339 = LINE('',#355340,#355341); +#355340 = CARTESIAN_POINT('',(128.5,-79.44,1.51)); +#355341 = VECTOR('',#355342,1.); +#355342 = DIRECTION('',(0.,0.,1.)); +#355343 = ORIENTED_EDGE('',*,*,#355344,.F.); +#355344 = EDGE_CURVE('',#355319,#355337,#355345,.T.); +#355345 = LINE('',#355346,#355347); +#355346 = CARTESIAN_POINT('',(128.5,-80.34,1.51)); +#355347 = VECTOR('',#355348,1.); +#355348 = DIRECTION('',(0.,1.,0.)); +#355349 = PLANE('',#355350); +#355350 = AXIS2_PLACEMENT_3D('',#355351,#355352,#355353); +#355351 = CARTESIAN_POINT('',(128.5,-80.34,1.51)); +#355352 = DIRECTION('',(-1.,0.,0.)); +#355353 = DIRECTION('',(0.,1.,0.)); +#355354 = ADVANCED_FACE('',(#355355),#355380,.T.); +#355355 = FACE_BOUND('',#355356,.T.); +#355356 = EDGE_LOOP('',(#355357,#355358,#355366,#355374)); +#355357 = ORIENTED_EDGE('',*,*,#355336,.T.); +#355358 = ORIENTED_EDGE('',*,*,#355359,.T.); +#355359 = EDGE_CURVE('',#355329,#355360,#355362,.T.); +#355360 = VERTEX_POINT('',#355361); +#355361 = CARTESIAN_POINT('',(130.,-79.44,1.55)); +#355362 = LINE('',#355363,#355364); +#355363 = CARTESIAN_POINT('',(128.5,-79.44,1.55)); +#355364 = VECTOR('',#355365,1.); +#355365 = DIRECTION('',(1.,0.,0.)); +#355366 = ORIENTED_EDGE('',*,*,#355367,.F.); +#355367 = EDGE_CURVE('',#355368,#355360,#355370,.T.); +#355368 = VERTEX_POINT('',#355369); +#355369 = CARTESIAN_POINT('',(130.,-79.44,1.51)); +#355370 = LINE('',#355371,#355372); +#355371 = CARTESIAN_POINT('',(130.,-79.44,1.51)); +#355372 = VECTOR('',#355373,1.); +#355373 = DIRECTION('',(0.,0.,1.)); +#355374 = ORIENTED_EDGE('',*,*,#355375,.F.); +#355375 = EDGE_CURVE('',#355337,#355368,#355376,.T.); +#355376 = LINE('',#355377,#355378); +#355377 = CARTESIAN_POINT('',(128.5,-79.44,1.51)); +#355378 = VECTOR('',#355379,1.); +#355379 = DIRECTION('',(1.,0.,0.)); +#355380 = PLANE('',#355381); +#355381 = AXIS2_PLACEMENT_3D('',#355382,#355383,#355384); +#355382 = CARTESIAN_POINT('',(128.5,-79.44,1.51)); +#355383 = DIRECTION('',(0.,1.,0.)); +#355384 = DIRECTION('',(1.,0.,0.)); +#355385 = ADVANCED_FACE('',(#355386),#355411,.T.); +#355386 = FACE_BOUND('',#355387,.T.); +#355387 = EDGE_LOOP('',(#355388,#355389,#355397,#355405)); +#355388 = ORIENTED_EDGE('',*,*,#355367,.T.); +#355389 = ORIENTED_EDGE('',*,*,#355390,.T.); +#355390 = EDGE_CURVE('',#355360,#355391,#355393,.T.); +#355391 = VERTEX_POINT('',#355392); +#355392 = CARTESIAN_POINT('',(130.,-80.34,1.55)); +#355393 = LINE('',#355394,#355395); +#355394 = CARTESIAN_POINT('',(130.,-79.44,1.55)); +#355395 = VECTOR('',#355396,1.); +#355396 = DIRECTION('',(0.,-1.,0.)); +#355397 = ORIENTED_EDGE('',*,*,#355398,.F.); +#355398 = EDGE_CURVE('',#355399,#355391,#355401,.T.); +#355399 = VERTEX_POINT('',#355400); +#355400 = CARTESIAN_POINT('',(130.,-80.34,1.51)); +#355401 = LINE('',#355402,#355403); +#355402 = CARTESIAN_POINT('',(130.,-80.34,1.51)); +#355403 = VECTOR('',#355404,1.); +#355404 = DIRECTION('',(0.,0.,1.)); +#355405 = ORIENTED_EDGE('',*,*,#355406,.F.); +#355406 = EDGE_CURVE('',#355368,#355399,#355407,.T.); +#355407 = LINE('',#355408,#355409); +#355408 = CARTESIAN_POINT('',(130.,-79.44,1.51)); +#355409 = VECTOR('',#355410,1.); +#355410 = DIRECTION('',(0.,-1.,0.)); +#355411 = PLANE('',#355412); +#355412 = AXIS2_PLACEMENT_3D('',#355413,#355414,#355415); +#355413 = CARTESIAN_POINT('',(130.,-79.44,1.51)); +#355414 = DIRECTION('',(1.,0.,-0.)); +#355415 = DIRECTION('',(0.,-1.,0.)); +#355416 = ADVANCED_FACE('',(#355417),#355433,.T.); +#355417 = FACE_BOUND('',#355418,.T.); +#355418 = EDGE_LOOP('',(#355419,#355420,#355426,#355427)); +#355419 = ORIENTED_EDGE('',*,*,#355398,.T.); +#355420 = ORIENTED_EDGE('',*,*,#355421,.T.); +#355421 = EDGE_CURVE('',#355391,#355321,#355422,.T.); +#355422 = LINE('',#355423,#355424); +#355423 = CARTESIAN_POINT('',(130.,-80.34,1.55)); +#355424 = VECTOR('',#355425,1.); +#355425 = DIRECTION('',(-1.,0.,0.)); +#355426 = ORIENTED_EDGE('',*,*,#355318,.F.); +#355427 = ORIENTED_EDGE('',*,*,#355428,.F.); +#355428 = EDGE_CURVE('',#355399,#355319,#355429,.T.); +#355429 = LINE('',#355430,#355431); +#355430 = CARTESIAN_POINT('',(130.,-80.34,1.51)); +#355431 = VECTOR('',#355432,1.); +#355432 = DIRECTION('',(-1.,0.,0.)); +#355433 = PLANE('',#355434); +#355434 = AXIS2_PLACEMENT_3D('',#355435,#355436,#355437); +#355435 = CARTESIAN_POINT('',(130.,-80.34,1.51)); +#355436 = DIRECTION('',(0.,-1.,0.)); +#355437 = DIRECTION('',(-1.,0.,0.)); +#355438 = ADVANCED_FACE('',(#355439),#355445,.F.); +#355439 = FACE_BOUND('',#355440,.T.); +#355440 = EDGE_LOOP('',(#355441,#355442,#355443,#355444)); +#355441 = ORIENTED_EDGE('',*,*,#355344,.T.); +#355442 = ORIENTED_EDGE('',*,*,#355375,.T.); +#355443 = ORIENTED_EDGE('',*,*,#355406,.T.); +#355444 = ORIENTED_EDGE('',*,*,#355428,.T.); +#355445 = PLANE('',#355446); +#355446 = AXIS2_PLACEMENT_3D('',#355447,#355448,#355449); +#355447 = CARTESIAN_POINT('',(0.,0.,1.51)); +#355448 = DIRECTION('',(0.,0.,1.)); +#355449 = DIRECTION('',(1.,0.,-0.)); +#355450 = ADVANCED_FACE('',(#355451),#355457,.T.); +#355451 = FACE_BOUND('',#355452,.F.); +#355452 = EDGE_LOOP('',(#355453,#355454,#355455,#355456)); +#355453 = ORIENTED_EDGE('',*,*,#355328,.T.); +#355454 = ORIENTED_EDGE('',*,*,#355359,.T.); +#355455 = ORIENTED_EDGE('',*,*,#355390,.T.); +#355456 = ORIENTED_EDGE('',*,*,#355421,.T.); +#355457 = PLANE('',#355458); +#355458 = AXIS2_PLACEMENT_3D('',#355459,#355460,#355461); +#355459 = CARTESIAN_POINT('',(0.,0.,1.55)); +#355460 = DIRECTION('',(0.,0.,1.)); +#355461 = DIRECTION('',(1.,0.,-0.)); +#355462 = MANIFOLD_SOLID_BREP('',#355463); +#355463 = CLOSED_SHELL('',(#355464,#355506,#355537,#355570,#355601, + #355634,#355665,#355698,#355720,#355736)); +#355464 = ADVANCED_FACE('',(#355465),#355501,.T.); +#355465 = FACE_BOUND('',#355466,.T.); +#355466 = EDGE_LOOP('',(#355467,#355477,#355486,#355494)); +#355467 = ORIENTED_EDGE('',*,*,#355468,.T.); +#355468 = EDGE_CURVE('',#355469,#355471,#355473,.T.); +#355469 = VERTEX_POINT('',#355470); +#355470 = CARTESIAN_POINT('',(137.1,-152.405,1.51)); +#355471 = VERTEX_POINT('',#355472); +#355472 = CARTESIAN_POINT('',(137.1,-152.405,1.55)); +#355473 = LINE('',#355474,#355475); +#355474 = CARTESIAN_POINT('',(137.1,-152.405,1.51)); +#355475 = VECTOR('',#355476,1.); +#355476 = DIRECTION('',(0.,0.,1.)); +#355477 = ORIENTED_EDGE('',*,*,#355478,.T.); +#355478 = EDGE_CURVE('',#355471,#355479,#355481,.T.); +#355479 = VERTEX_POINT('',#355480); +#355480 = CARTESIAN_POINT('',(137.175,-152.33,1.55)); +#355481 = CIRCLE('',#355482,7.500002932469E-02); +#355482 = AXIS2_PLACEMENT_3D('',#355483,#355484,#355485); +#355483 = CARTESIAN_POINT('',(137.17500002932,-152.4050000293,1.55)); +#355484 = DIRECTION('',(0.,0.,-1.)); +#355485 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355486 = ORIENTED_EDGE('',*,*,#355487,.F.); +#355487 = EDGE_CURVE('',#355488,#355479,#355490,.T.); +#355488 = VERTEX_POINT('',#355489); +#355489 = CARTESIAN_POINT('',(137.175,-152.33,1.51)); +#355490 = LINE('',#355491,#355492); +#355491 = CARTESIAN_POINT('',(137.175,-152.33,1.51)); +#355492 = VECTOR('',#355493,1.); +#355493 = DIRECTION('',(0.,0.,1.)); +#355494 = ORIENTED_EDGE('',*,*,#355495,.F.); +#355495 = EDGE_CURVE('',#355469,#355488,#355496,.T.); +#355496 = CIRCLE('',#355497,7.500002932469E-02); +#355497 = AXIS2_PLACEMENT_3D('',#355498,#355499,#355500); +#355498 = CARTESIAN_POINT('',(137.17500002932,-152.4050000293,1.51)); +#355499 = DIRECTION('',(0.,0.,-1.)); +#355500 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355501 = CYLINDRICAL_SURFACE('',#355502,7.500002932469E-02); +#355502 = AXIS2_PLACEMENT_3D('',#355503,#355504,#355505); +#355503 = CARTESIAN_POINT('',(137.17500002932,-152.4050000293,1.51)); +#355504 = DIRECTION('',(0.,0.,-1.)); +#355505 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355506 = ADVANCED_FACE('',(#355507),#355532,.T.); +#355507 = FACE_BOUND('',#355508,.T.); +#355508 = EDGE_LOOP('',(#355509,#355510,#355518,#355526)); +#355509 = ORIENTED_EDGE('',*,*,#355487,.T.); +#355510 = ORIENTED_EDGE('',*,*,#355511,.T.); +#355511 = EDGE_CURVE('',#355479,#355512,#355514,.T.); +#355512 = VERTEX_POINT('',#355513); +#355513 = CARTESIAN_POINT('',(137.325,-152.33,1.55)); +#355514 = LINE('',#355515,#355516); +#355515 = CARTESIAN_POINT('',(137.175,-152.33,1.55)); +#355516 = VECTOR('',#355517,1.); +#355517 = DIRECTION('',(1.,0.,0.)); +#355518 = ORIENTED_EDGE('',*,*,#355519,.F.); +#355519 = EDGE_CURVE('',#355520,#355512,#355522,.T.); +#355520 = VERTEX_POINT('',#355521); +#355521 = CARTESIAN_POINT('',(137.325,-152.33,1.51)); +#355522 = LINE('',#355523,#355524); +#355523 = CARTESIAN_POINT('',(137.325,-152.33,1.51)); +#355524 = VECTOR('',#355525,1.); +#355525 = DIRECTION('',(0.,0.,1.)); +#355526 = ORIENTED_EDGE('',*,*,#355527,.F.); +#355527 = EDGE_CURVE('',#355488,#355520,#355528,.T.); +#355528 = LINE('',#355529,#355530); +#355529 = CARTESIAN_POINT('',(137.175,-152.33,1.51)); +#355530 = VECTOR('',#355531,1.); +#355531 = DIRECTION('',(1.,0.,0.)); +#355532 = PLANE('',#355533); +#355533 = AXIS2_PLACEMENT_3D('',#355534,#355535,#355536); +#355534 = CARTESIAN_POINT('',(137.175,-152.33,1.51)); +#355535 = DIRECTION('',(0.,1.,0.)); +#355536 = DIRECTION('',(1.,0.,0.)); +#355537 = ADVANCED_FACE('',(#355538),#355565,.T.); +#355538 = FACE_BOUND('',#355539,.T.); +#355539 = EDGE_LOOP('',(#355540,#355541,#355550,#355558)); +#355540 = ORIENTED_EDGE('',*,*,#355519,.T.); +#355541 = ORIENTED_EDGE('',*,*,#355542,.T.); +#355542 = EDGE_CURVE('',#355512,#355543,#355545,.T.); +#355543 = VERTEX_POINT('',#355544); +#355544 = CARTESIAN_POINT('',(137.4,-152.405,1.55)); +#355545 = CIRCLE('',#355546,7.500002932469E-02); +#355546 = AXIS2_PLACEMENT_3D('',#355547,#355548,#355549); +#355547 = CARTESIAN_POINT('',(137.32499997067,-152.4050000293,1.55)); +#355548 = DIRECTION('',(0.,0.,-1.)); +#355549 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355550 = ORIENTED_EDGE('',*,*,#355551,.F.); +#355551 = EDGE_CURVE('',#355552,#355543,#355554,.T.); +#355552 = VERTEX_POINT('',#355553); +#355553 = CARTESIAN_POINT('',(137.4,-152.405,1.51)); +#355554 = LINE('',#355555,#355556); +#355555 = CARTESIAN_POINT('',(137.4,-152.405,1.51)); +#355556 = VECTOR('',#355557,1.); +#355557 = DIRECTION('',(0.,0.,1.)); +#355558 = ORIENTED_EDGE('',*,*,#355559,.F.); +#355559 = EDGE_CURVE('',#355520,#355552,#355560,.T.); +#355560 = CIRCLE('',#355561,7.500002932469E-02); +#355561 = AXIS2_PLACEMENT_3D('',#355562,#355563,#355564); +#355562 = CARTESIAN_POINT('',(137.32499997067,-152.4050000293,1.51)); +#355563 = DIRECTION('',(0.,0.,-1.)); +#355564 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355565 = CYLINDRICAL_SURFACE('',#355566,7.500002932469E-02); +#355566 = AXIS2_PLACEMENT_3D('',#355567,#355568,#355569); +#355567 = CARTESIAN_POINT('',(137.32499997067,-152.4050000293,1.51)); +#355568 = DIRECTION('',(0.,0.,-1.)); +#355569 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355570 = ADVANCED_FACE('',(#355571),#355596,.T.); +#355571 = FACE_BOUND('',#355572,.T.); +#355572 = EDGE_LOOP('',(#355573,#355574,#355582,#355590)); +#355573 = ORIENTED_EDGE('',*,*,#355551,.T.); +#355574 = ORIENTED_EDGE('',*,*,#355575,.T.); +#355575 = EDGE_CURVE('',#355543,#355576,#355578,.T.); +#355576 = VERTEX_POINT('',#355577); +#355577 = CARTESIAN_POINT('',(137.4,-153.705,1.55)); +#355578 = LINE('',#355579,#355580); +#355579 = CARTESIAN_POINT('',(137.4,-152.405,1.55)); +#355580 = VECTOR('',#355581,1.); +#355581 = DIRECTION('',(0.,-1.,0.)); +#355582 = ORIENTED_EDGE('',*,*,#355583,.F.); +#355583 = EDGE_CURVE('',#355584,#355576,#355586,.T.); +#355584 = VERTEX_POINT('',#355585); +#355585 = CARTESIAN_POINT('',(137.4,-153.705,1.51)); +#355586 = LINE('',#355587,#355588); +#355587 = CARTESIAN_POINT('',(137.4,-153.705,1.51)); +#355588 = VECTOR('',#355589,1.); +#355589 = DIRECTION('',(0.,0.,1.)); +#355590 = ORIENTED_EDGE('',*,*,#355591,.F.); +#355591 = EDGE_CURVE('',#355552,#355584,#355592,.T.); +#355592 = LINE('',#355593,#355594); +#355593 = CARTESIAN_POINT('',(137.4,-152.405,1.51)); +#355594 = VECTOR('',#355595,1.); +#355595 = DIRECTION('',(0.,-1.,0.)); +#355596 = PLANE('',#355597); +#355597 = AXIS2_PLACEMENT_3D('',#355598,#355599,#355600); +#355598 = CARTESIAN_POINT('',(137.4,-152.405,1.51)); +#355599 = DIRECTION('',(1.,0.,-0.)); +#355600 = DIRECTION('',(0.,-1.,0.)); +#355601 = ADVANCED_FACE('',(#355602),#355629,.T.); +#355602 = FACE_BOUND('',#355603,.T.); +#355603 = EDGE_LOOP('',(#355604,#355605,#355614,#355622)); +#355604 = ORIENTED_EDGE('',*,*,#355583,.T.); +#355605 = ORIENTED_EDGE('',*,*,#355606,.T.); +#355606 = EDGE_CURVE('',#355576,#355607,#355609,.T.); +#355607 = VERTEX_POINT('',#355608); +#355608 = CARTESIAN_POINT('',(137.325,-153.78,1.55)); +#355609 = CIRCLE('',#355610,7.500002932469E-02); +#355610 = AXIS2_PLACEMENT_3D('',#355611,#355612,#355613); +#355611 = CARTESIAN_POINT('',(137.32499997067,-153.7049999706,1.55)); +#355612 = DIRECTION('',(0.,0.,-1.)); +#355613 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355614 = ORIENTED_EDGE('',*,*,#355615,.F.); +#355615 = EDGE_CURVE('',#355616,#355607,#355618,.T.); +#355616 = VERTEX_POINT('',#355617); +#355617 = CARTESIAN_POINT('',(137.325,-153.78,1.51)); +#355618 = LINE('',#355619,#355620); +#355619 = CARTESIAN_POINT('',(137.325,-153.78,1.51)); +#355620 = VECTOR('',#355621,1.); +#355621 = DIRECTION('',(0.,0.,1.)); +#355622 = ORIENTED_EDGE('',*,*,#355623,.F.); +#355623 = EDGE_CURVE('',#355584,#355616,#355624,.T.); +#355624 = CIRCLE('',#355625,7.500002932469E-02); +#355625 = AXIS2_PLACEMENT_3D('',#355626,#355627,#355628); +#355626 = CARTESIAN_POINT('',(137.32499997067,-153.7049999706,1.51)); +#355627 = DIRECTION('',(0.,0.,-1.)); +#355628 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355629 = CYLINDRICAL_SURFACE('',#355630,7.500002932469E-02); +#355630 = AXIS2_PLACEMENT_3D('',#355631,#355632,#355633); +#355631 = CARTESIAN_POINT('',(137.32499997067,-153.7049999706,1.51)); +#355632 = DIRECTION('',(0.,0.,-1.)); +#355633 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355634 = ADVANCED_FACE('',(#355635),#355660,.T.); +#355635 = FACE_BOUND('',#355636,.T.); +#355636 = EDGE_LOOP('',(#355637,#355638,#355646,#355654)); +#355637 = ORIENTED_EDGE('',*,*,#355615,.T.); +#355638 = ORIENTED_EDGE('',*,*,#355639,.T.); +#355639 = EDGE_CURVE('',#355607,#355640,#355642,.T.); +#355640 = VERTEX_POINT('',#355641); +#355641 = CARTESIAN_POINT('',(137.175,-153.78,1.55)); +#355642 = LINE('',#355643,#355644); +#355643 = CARTESIAN_POINT('',(137.325,-153.78,1.55)); +#355644 = VECTOR('',#355645,1.); +#355645 = DIRECTION('',(-1.,0.,0.)); +#355646 = ORIENTED_EDGE('',*,*,#355647,.F.); +#355647 = EDGE_CURVE('',#355648,#355640,#355650,.T.); +#355648 = VERTEX_POINT('',#355649); +#355649 = CARTESIAN_POINT('',(137.175,-153.78,1.51)); +#355650 = LINE('',#355651,#355652); +#355651 = CARTESIAN_POINT('',(137.175,-153.78,1.51)); +#355652 = VECTOR('',#355653,1.); +#355653 = DIRECTION('',(0.,0.,1.)); +#355654 = ORIENTED_EDGE('',*,*,#355655,.F.); +#355655 = EDGE_CURVE('',#355616,#355648,#355656,.T.); +#355656 = LINE('',#355657,#355658); +#355657 = CARTESIAN_POINT('',(137.325,-153.78,1.51)); +#355658 = VECTOR('',#355659,1.); +#355659 = DIRECTION('',(-1.,0.,0.)); +#355660 = PLANE('',#355661); +#355661 = AXIS2_PLACEMENT_3D('',#355662,#355663,#355664); +#355662 = CARTESIAN_POINT('',(137.325,-153.78,1.51)); +#355663 = DIRECTION('',(0.,-1.,0.)); +#355664 = DIRECTION('',(-1.,0.,0.)); +#355665 = ADVANCED_FACE('',(#355666),#355693,.T.); +#355666 = FACE_BOUND('',#355667,.T.); +#355667 = EDGE_LOOP('',(#355668,#355669,#355678,#355686)); +#355668 = ORIENTED_EDGE('',*,*,#355647,.T.); +#355669 = ORIENTED_EDGE('',*,*,#355670,.T.); +#355670 = EDGE_CURVE('',#355640,#355671,#355673,.T.); +#355671 = VERTEX_POINT('',#355672); +#355672 = CARTESIAN_POINT('',(137.1,-153.705,1.55)); +#355673 = CIRCLE('',#355674,7.500002932469E-02); +#355674 = AXIS2_PLACEMENT_3D('',#355675,#355676,#355677); +#355675 = CARTESIAN_POINT('',(137.17500002932,-153.7049999706,1.55)); +#355676 = DIRECTION('',(0.,0.,-1.)); +#355677 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355678 = ORIENTED_EDGE('',*,*,#355679,.F.); +#355679 = EDGE_CURVE('',#355680,#355671,#355682,.T.); +#355680 = VERTEX_POINT('',#355681); +#355681 = CARTESIAN_POINT('',(137.1,-153.705,1.51)); +#355682 = LINE('',#355683,#355684); +#355683 = CARTESIAN_POINT('',(137.1,-153.705,1.51)); +#355684 = VECTOR('',#355685,1.); +#355685 = DIRECTION('',(0.,0.,1.)); +#355686 = ORIENTED_EDGE('',*,*,#355687,.F.); +#355687 = EDGE_CURVE('',#355648,#355680,#355688,.T.); +#355688 = CIRCLE('',#355689,7.500002932469E-02); +#355689 = AXIS2_PLACEMENT_3D('',#355690,#355691,#355692); +#355690 = CARTESIAN_POINT('',(137.17500002932,-153.7049999706,1.51)); +#355691 = DIRECTION('',(0.,0.,-1.)); +#355692 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355693 = CYLINDRICAL_SURFACE('',#355694,7.500002932469E-02); +#355694 = AXIS2_PLACEMENT_3D('',#355695,#355696,#355697); +#355695 = CARTESIAN_POINT('',(137.17500002932,-153.7049999706,1.51)); +#355696 = DIRECTION('',(0.,0.,-1.)); +#355697 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355698 = ADVANCED_FACE('',(#355699),#355715,.T.); +#355699 = FACE_BOUND('',#355700,.T.); +#355700 = EDGE_LOOP('',(#355701,#355702,#355708,#355709)); +#355701 = ORIENTED_EDGE('',*,*,#355679,.T.); +#355702 = ORIENTED_EDGE('',*,*,#355703,.T.); +#355703 = EDGE_CURVE('',#355671,#355471,#355704,.T.); +#355704 = LINE('',#355705,#355706); +#355705 = CARTESIAN_POINT('',(137.1,-153.705,1.55)); +#355706 = VECTOR('',#355707,1.); +#355707 = DIRECTION('',(0.,1.,0.)); +#355708 = ORIENTED_EDGE('',*,*,#355468,.F.); +#355709 = ORIENTED_EDGE('',*,*,#355710,.F.); +#355710 = EDGE_CURVE('',#355680,#355469,#355711,.T.); +#355711 = LINE('',#355712,#355713); +#355712 = CARTESIAN_POINT('',(137.1,-153.705,1.51)); +#355713 = VECTOR('',#355714,1.); +#355714 = DIRECTION('',(0.,1.,0.)); +#355715 = PLANE('',#355716); +#355716 = AXIS2_PLACEMENT_3D('',#355717,#355718,#355719); +#355717 = CARTESIAN_POINT('',(137.1,-153.705,1.51)); +#355718 = DIRECTION('',(-1.,0.,0.)); +#355719 = DIRECTION('',(0.,1.,0.)); +#355720 = ADVANCED_FACE('',(#355721),#355731,.F.); +#355721 = FACE_BOUND('',#355722,.T.); +#355722 = EDGE_LOOP('',(#355723,#355724,#355725,#355726,#355727,#355728, + #355729,#355730)); +#355723 = ORIENTED_EDGE('',*,*,#355495,.T.); +#355724 = ORIENTED_EDGE('',*,*,#355527,.T.); +#355725 = ORIENTED_EDGE('',*,*,#355559,.T.); +#355726 = ORIENTED_EDGE('',*,*,#355591,.T.); +#355727 = ORIENTED_EDGE('',*,*,#355623,.T.); +#355728 = ORIENTED_EDGE('',*,*,#355655,.T.); +#355729 = ORIENTED_EDGE('',*,*,#355687,.T.); +#355730 = ORIENTED_EDGE('',*,*,#355710,.T.); +#355731 = PLANE('',#355732); +#355732 = AXIS2_PLACEMENT_3D('',#355733,#355734,#355735); +#355733 = CARTESIAN_POINT('',(0.,0.,1.51)); +#355734 = DIRECTION('',(0.,0.,1.)); +#355735 = DIRECTION('',(1.,0.,-0.)); +#355736 = ADVANCED_FACE('',(#355737),#355747,.T.); +#355737 = FACE_BOUND('',#355738,.F.); +#355738 = EDGE_LOOP('',(#355739,#355740,#355741,#355742,#355743,#355744, + #355745,#355746)); +#355739 = ORIENTED_EDGE('',*,*,#355478,.T.); +#355740 = ORIENTED_EDGE('',*,*,#355511,.T.); +#355741 = ORIENTED_EDGE('',*,*,#355542,.T.); +#355742 = ORIENTED_EDGE('',*,*,#355575,.T.); +#355743 = ORIENTED_EDGE('',*,*,#355606,.T.); +#355744 = ORIENTED_EDGE('',*,*,#355639,.T.); +#355745 = ORIENTED_EDGE('',*,*,#355670,.T.); +#355746 = ORIENTED_EDGE('',*,*,#355703,.T.); +#355747 = PLANE('',#355748); +#355748 = AXIS2_PLACEMENT_3D('',#355749,#355750,#355751); +#355749 = CARTESIAN_POINT('',(0.,0.,1.55)); +#355750 = DIRECTION('',(0.,0.,1.)); +#355751 = DIRECTION('',(1.,0.,-0.)); +#355752 = MANIFOLD_SOLID_BREP('',#355753); +#355753 = CLOSED_SHELL('',(#355754,#355796,#355827,#355860,#355891, + #355924,#355955,#355988,#356010,#356026)); +#355754 = ADVANCED_FACE('',(#355755),#355791,.T.); +#355755 = FACE_BOUND('',#355756,.T.); +#355756 = EDGE_LOOP('',(#355757,#355767,#355776,#355784)); +#355757 = ORIENTED_EDGE('',*,*,#355758,.T.); +#355758 = EDGE_CURVE('',#355759,#355761,#355763,.T.); +#355759 = VERTEX_POINT('',#355760); +#355760 = CARTESIAN_POINT('',(138.1,-152.405,1.51)); +#355761 = VERTEX_POINT('',#355762); +#355762 = CARTESIAN_POINT('',(138.1,-152.405,1.55)); +#355763 = LINE('',#355764,#355765); +#355764 = CARTESIAN_POINT('',(138.1,-152.405,1.51)); +#355765 = VECTOR('',#355766,1.); +#355766 = DIRECTION('',(0.,0.,1.)); +#355767 = ORIENTED_EDGE('',*,*,#355768,.T.); +#355768 = EDGE_CURVE('',#355761,#355769,#355771,.T.); +#355769 = VERTEX_POINT('',#355770); +#355770 = CARTESIAN_POINT('',(138.175,-152.33,1.55)); +#355771 = CIRCLE('',#355772,7.500002932469E-02); +#355772 = AXIS2_PLACEMENT_3D('',#355773,#355774,#355775); +#355773 = CARTESIAN_POINT('',(138.17500002932,-152.4050000293,1.55)); +#355774 = DIRECTION('',(0.,0.,-1.)); +#355775 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355776 = ORIENTED_EDGE('',*,*,#355777,.F.); +#355777 = EDGE_CURVE('',#355778,#355769,#355780,.T.); +#355778 = VERTEX_POINT('',#355779); +#355779 = CARTESIAN_POINT('',(138.175,-152.33,1.51)); +#355780 = LINE('',#355781,#355782); +#355781 = CARTESIAN_POINT('',(138.175,-152.33,1.51)); +#355782 = VECTOR('',#355783,1.); +#355783 = DIRECTION('',(0.,0.,1.)); +#355784 = ORIENTED_EDGE('',*,*,#355785,.F.); +#355785 = EDGE_CURVE('',#355759,#355778,#355786,.T.); +#355786 = CIRCLE('',#355787,7.500002932469E-02); +#355787 = AXIS2_PLACEMENT_3D('',#355788,#355789,#355790); +#355788 = CARTESIAN_POINT('',(138.17500002932,-152.4050000293,1.51)); +#355789 = DIRECTION('',(0.,0.,-1.)); +#355790 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355791 = CYLINDRICAL_SURFACE('',#355792,7.500002932469E-02); +#355792 = AXIS2_PLACEMENT_3D('',#355793,#355794,#355795); +#355793 = CARTESIAN_POINT('',(138.17500002932,-152.4050000293,1.51)); +#355794 = DIRECTION('',(0.,0.,-1.)); +#355795 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#355796 = ADVANCED_FACE('',(#355797),#355822,.T.); +#355797 = FACE_BOUND('',#355798,.T.); +#355798 = EDGE_LOOP('',(#355799,#355800,#355808,#355816)); +#355799 = ORIENTED_EDGE('',*,*,#355777,.T.); +#355800 = ORIENTED_EDGE('',*,*,#355801,.T.); +#355801 = EDGE_CURVE('',#355769,#355802,#355804,.T.); +#355802 = VERTEX_POINT('',#355803); +#355803 = CARTESIAN_POINT('',(138.325,-152.33,1.55)); +#355804 = LINE('',#355805,#355806); +#355805 = CARTESIAN_POINT('',(138.175,-152.33,1.55)); +#355806 = VECTOR('',#355807,1.); +#355807 = DIRECTION('',(1.,0.,0.)); +#355808 = ORIENTED_EDGE('',*,*,#355809,.F.); +#355809 = EDGE_CURVE('',#355810,#355802,#355812,.T.); +#355810 = VERTEX_POINT('',#355811); +#355811 = CARTESIAN_POINT('',(138.325,-152.33,1.51)); +#355812 = LINE('',#355813,#355814); +#355813 = CARTESIAN_POINT('',(138.325,-152.33,1.51)); +#355814 = VECTOR('',#355815,1.); +#355815 = DIRECTION('',(0.,0.,1.)); +#355816 = ORIENTED_EDGE('',*,*,#355817,.F.); +#355817 = EDGE_CURVE('',#355778,#355810,#355818,.T.); +#355818 = LINE('',#355819,#355820); +#355819 = CARTESIAN_POINT('',(138.175,-152.33,1.51)); +#355820 = VECTOR('',#355821,1.); +#355821 = DIRECTION('',(1.,0.,0.)); +#355822 = PLANE('',#355823); +#355823 = AXIS2_PLACEMENT_3D('',#355824,#355825,#355826); +#355824 = CARTESIAN_POINT('',(138.175,-152.33,1.51)); +#355825 = DIRECTION('',(0.,1.,0.)); +#355826 = DIRECTION('',(1.,0.,0.)); +#355827 = ADVANCED_FACE('',(#355828),#355855,.T.); +#355828 = FACE_BOUND('',#355829,.T.); +#355829 = EDGE_LOOP('',(#355830,#355831,#355840,#355848)); +#355830 = ORIENTED_EDGE('',*,*,#355809,.T.); +#355831 = ORIENTED_EDGE('',*,*,#355832,.T.); +#355832 = EDGE_CURVE('',#355802,#355833,#355835,.T.); +#355833 = VERTEX_POINT('',#355834); +#355834 = CARTESIAN_POINT('',(138.4,-152.405,1.55)); +#355835 = CIRCLE('',#355836,7.500002932469E-02); +#355836 = AXIS2_PLACEMENT_3D('',#355837,#355838,#355839); +#355837 = CARTESIAN_POINT('',(138.32499997067,-152.4050000293,1.55)); +#355838 = DIRECTION('',(0.,0.,-1.)); +#355839 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355840 = ORIENTED_EDGE('',*,*,#355841,.F.); +#355841 = EDGE_CURVE('',#355842,#355833,#355844,.T.); +#355842 = VERTEX_POINT('',#355843); +#355843 = CARTESIAN_POINT('',(138.4,-152.405,1.51)); +#355844 = LINE('',#355845,#355846); +#355845 = CARTESIAN_POINT('',(138.4,-152.405,1.51)); +#355846 = VECTOR('',#355847,1.); +#355847 = DIRECTION('',(0.,0.,1.)); +#355848 = ORIENTED_EDGE('',*,*,#355849,.F.); +#355849 = EDGE_CURVE('',#355810,#355842,#355850,.T.); +#355850 = CIRCLE('',#355851,7.500002932469E-02); +#355851 = AXIS2_PLACEMENT_3D('',#355852,#355853,#355854); +#355852 = CARTESIAN_POINT('',(138.32499997067,-152.4050000293,1.51)); +#355853 = DIRECTION('',(0.,0.,-1.)); +#355854 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355855 = CYLINDRICAL_SURFACE('',#355856,7.500002932469E-02); +#355856 = AXIS2_PLACEMENT_3D('',#355857,#355858,#355859); +#355857 = CARTESIAN_POINT('',(138.32499997067,-152.4050000293,1.51)); +#355858 = DIRECTION('',(0.,0.,-1.)); +#355859 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#355860 = ADVANCED_FACE('',(#355861),#355886,.T.); +#355861 = FACE_BOUND('',#355862,.T.); +#355862 = EDGE_LOOP('',(#355863,#355864,#355872,#355880)); +#355863 = ORIENTED_EDGE('',*,*,#355841,.T.); +#355864 = ORIENTED_EDGE('',*,*,#355865,.T.); +#355865 = EDGE_CURVE('',#355833,#355866,#355868,.T.); +#355866 = VERTEX_POINT('',#355867); +#355867 = CARTESIAN_POINT('',(138.4,-153.705,1.55)); +#355868 = LINE('',#355869,#355870); +#355869 = CARTESIAN_POINT('',(138.4,-152.405,1.55)); +#355870 = VECTOR('',#355871,1.); +#355871 = DIRECTION('',(0.,-1.,0.)); +#355872 = ORIENTED_EDGE('',*,*,#355873,.F.); +#355873 = EDGE_CURVE('',#355874,#355866,#355876,.T.); +#355874 = VERTEX_POINT('',#355875); +#355875 = CARTESIAN_POINT('',(138.4,-153.705,1.51)); +#355876 = LINE('',#355877,#355878); +#355877 = CARTESIAN_POINT('',(138.4,-153.705,1.51)); +#355878 = VECTOR('',#355879,1.); +#355879 = DIRECTION('',(0.,0.,1.)); +#355880 = ORIENTED_EDGE('',*,*,#355881,.F.); +#355881 = EDGE_CURVE('',#355842,#355874,#355882,.T.); +#355882 = LINE('',#355883,#355884); +#355883 = CARTESIAN_POINT('',(138.4,-152.405,1.51)); +#355884 = VECTOR('',#355885,1.); +#355885 = DIRECTION('',(0.,-1.,0.)); +#355886 = PLANE('',#355887); +#355887 = AXIS2_PLACEMENT_3D('',#355888,#355889,#355890); +#355888 = CARTESIAN_POINT('',(138.4,-152.405,1.51)); +#355889 = DIRECTION('',(1.,0.,-0.)); +#355890 = DIRECTION('',(0.,-1.,0.)); +#355891 = ADVANCED_FACE('',(#355892),#355919,.T.); +#355892 = FACE_BOUND('',#355893,.T.); +#355893 = EDGE_LOOP('',(#355894,#355895,#355904,#355912)); +#355894 = ORIENTED_EDGE('',*,*,#355873,.T.); +#355895 = ORIENTED_EDGE('',*,*,#355896,.T.); +#355896 = EDGE_CURVE('',#355866,#355897,#355899,.T.); +#355897 = VERTEX_POINT('',#355898); +#355898 = CARTESIAN_POINT('',(138.325,-153.78,1.55)); +#355899 = CIRCLE('',#355900,7.500002932469E-02); +#355900 = AXIS2_PLACEMENT_3D('',#355901,#355902,#355903); +#355901 = CARTESIAN_POINT('',(138.32499997067,-153.7049999706,1.55)); +#355902 = DIRECTION('',(0.,0.,-1.)); +#355903 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355904 = ORIENTED_EDGE('',*,*,#355905,.F.); +#355905 = EDGE_CURVE('',#355906,#355897,#355908,.T.); +#355906 = VERTEX_POINT('',#355907); +#355907 = CARTESIAN_POINT('',(138.325,-153.78,1.51)); +#355908 = LINE('',#355909,#355910); +#355909 = CARTESIAN_POINT('',(138.325,-153.78,1.51)); +#355910 = VECTOR('',#355911,1.); +#355911 = DIRECTION('',(0.,0.,1.)); +#355912 = ORIENTED_EDGE('',*,*,#355913,.F.); +#355913 = EDGE_CURVE('',#355874,#355906,#355914,.T.); +#355914 = CIRCLE('',#355915,7.500002932469E-02); +#355915 = AXIS2_PLACEMENT_3D('',#355916,#355917,#355918); +#355916 = CARTESIAN_POINT('',(138.32499997067,-153.7049999706,1.51)); +#355917 = DIRECTION('',(0.,0.,-1.)); +#355918 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355919 = CYLINDRICAL_SURFACE('',#355920,7.500002932469E-02); +#355920 = AXIS2_PLACEMENT_3D('',#355921,#355922,#355923); +#355921 = CARTESIAN_POINT('',(138.32499997067,-153.7049999706,1.51)); +#355922 = DIRECTION('',(0.,0.,-1.)); +#355923 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#355924 = ADVANCED_FACE('',(#355925),#355950,.T.); +#355925 = FACE_BOUND('',#355926,.T.); +#355926 = EDGE_LOOP('',(#355927,#355928,#355936,#355944)); +#355927 = ORIENTED_EDGE('',*,*,#355905,.T.); +#355928 = ORIENTED_EDGE('',*,*,#355929,.T.); +#355929 = EDGE_CURVE('',#355897,#355930,#355932,.T.); +#355930 = VERTEX_POINT('',#355931); +#355931 = CARTESIAN_POINT('',(138.175,-153.78,1.55)); +#355932 = LINE('',#355933,#355934); +#355933 = CARTESIAN_POINT('',(138.325,-153.78,1.55)); +#355934 = VECTOR('',#355935,1.); +#355935 = DIRECTION('',(-1.,0.,0.)); +#355936 = ORIENTED_EDGE('',*,*,#355937,.F.); +#355937 = EDGE_CURVE('',#355938,#355930,#355940,.T.); +#355938 = VERTEX_POINT('',#355939); +#355939 = CARTESIAN_POINT('',(138.175,-153.78,1.51)); +#355940 = LINE('',#355941,#355942); +#355941 = CARTESIAN_POINT('',(138.175,-153.78,1.51)); +#355942 = VECTOR('',#355943,1.); +#355943 = DIRECTION('',(0.,0.,1.)); +#355944 = ORIENTED_EDGE('',*,*,#355945,.F.); +#355945 = EDGE_CURVE('',#355906,#355938,#355946,.T.); +#355946 = LINE('',#355947,#355948); +#355947 = CARTESIAN_POINT('',(138.325,-153.78,1.51)); +#355948 = VECTOR('',#355949,1.); +#355949 = DIRECTION('',(-1.,0.,0.)); +#355950 = PLANE('',#355951); +#355951 = AXIS2_PLACEMENT_3D('',#355952,#355953,#355954); +#355952 = CARTESIAN_POINT('',(138.325,-153.78,1.51)); +#355953 = DIRECTION('',(0.,-1.,0.)); +#355954 = DIRECTION('',(-1.,0.,0.)); +#355955 = ADVANCED_FACE('',(#355956),#355983,.T.); +#355956 = FACE_BOUND('',#355957,.T.); +#355957 = EDGE_LOOP('',(#355958,#355959,#355968,#355976)); +#355958 = ORIENTED_EDGE('',*,*,#355937,.T.); +#355959 = ORIENTED_EDGE('',*,*,#355960,.T.); +#355960 = EDGE_CURVE('',#355930,#355961,#355963,.T.); +#355961 = VERTEX_POINT('',#355962); +#355962 = CARTESIAN_POINT('',(138.1,-153.705,1.55)); +#355963 = CIRCLE('',#355964,7.500002932469E-02); +#355964 = AXIS2_PLACEMENT_3D('',#355965,#355966,#355967); +#355965 = CARTESIAN_POINT('',(138.17500002932,-153.7049999706,1.55)); +#355966 = DIRECTION('',(0.,0.,-1.)); +#355967 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355968 = ORIENTED_EDGE('',*,*,#355969,.F.); +#355969 = EDGE_CURVE('',#355970,#355961,#355972,.T.); +#355970 = VERTEX_POINT('',#355971); +#355971 = CARTESIAN_POINT('',(138.1,-153.705,1.51)); +#355972 = LINE('',#355973,#355974); +#355973 = CARTESIAN_POINT('',(138.1,-153.705,1.51)); +#355974 = VECTOR('',#355975,1.); +#355975 = DIRECTION('',(0.,0.,1.)); +#355976 = ORIENTED_EDGE('',*,*,#355977,.F.); +#355977 = EDGE_CURVE('',#355938,#355970,#355978,.T.); +#355978 = CIRCLE('',#355979,7.500002932469E-02); +#355979 = AXIS2_PLACEMENT_3D('',#355980,#355981,#355982); +#355980 = CARTESIAN_POINT('',(138.17500002932,-153.7049999706,1.51)); +#355981 = DIRECTION('',(0.,0.,-1.)); +#355982 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355983 = CYLINDRICAL_SURFACE('',#355984,7.500002932469E-02); +#355984 = AXIS2_PLACEMENT_3D('',#355985,#355986,#355987); +#355985 = CARTESIAN_POINT('',(138.17500002932,-153.7049999706,1.51)); +#355986 = DIRECTION('',(0.,0.,-1.)); +#355987 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#355988 = ADVANCED_FACE('',(#355989),#356005,.T.); +#355989 = FACE_BOUND('',#355990,.T.); +#355990 = EDGE_LOOP('',(#355991,#355992,#355998,#355999)); +#355991 = ORIENTED_EDGE('',*,*,#355969,.T.); +#355992 = ORIENTED_EDGE('',*,*,#355993,.T.); +#355993 = EDGE_CURVE('',#355961,#355761,#355994,.T.); +#355994 = LINE('',#355995,#355996); +#355995 = CARTESIAN_POINT('',(138.1,-153.705,1.55)); +#355996 = VECTOR('',#355997,1.); +#355997 = DIRECTION('',(0.,1.,0.)); +#355998 = ORIENTED_EDGE('',*,*,#355758,.F.); +#355999 = ORIENTED_EDGE('',*,*,#356000,.F.); +#356000 = EDGE_CURVE('',#355970,#355759,#356001,.T.); +#356001 = LINE('',#356002,#356003); +#356002 = CARTESIAN_POINT('',(138.1,-153.705,1.51)); +#356003 = VECTOR('',#356004,1.); +#356004 = DIRECTION('',(0.,1.,0.)); +#356005 = PLANE('',#356006); +#356006 = AXIS2_PLACEMENT_3D('',#356007,#356008,#356009); +#356007 = CARTESIAN_POINT('',(138.1,-153.705,1.51)); +#356008 = DIRECTION('',(-1.,0.,0.)); +#356009 = DIRECTION('',(0.,1.,0.)); +#356010 = ADVANCED_FACE('',(#356011),#356021,.F.); +#356011 = FACE_BOUND('',#356012,.T.); +#356012 = EDGE_LOOP('',(#356013,#356014,#356015,#356016,#356017,#356018, + #356019,#356020)); +#356013 = ORIENTED_EDGE('',*,*,#355785,.T.); +#356014 = ORIENTED_EDGE('',*,*,#355817,.T.); +#356015 = ORIENTED_EDGE('',*,*,#355849,.T.); +#356016 = ORIENTED_EDGE('',*,*,#355881,.T.); +#356017 = ORIENTED_EDGE('',*,*,#355913,.T.); +#356018 = ORIENTED_EDGE('',*,*,#355945,.T.); +#356019 = ORIENTED_EDGE('',*,*,#355977,.T.); +#356020 = ORIENTED_EDGE('',*,*,#356000,.T.); +#356021 = PLANE('',#356022); +#356022 = AXIS2_PLACEMENT_3D('',#356023,#356024,#356025); +#356023 = CARTESIAN_POINT('',(0.,0.,1.51)); +#356024 = DIRECTION('',(0.,0.,1.)); +#356025 = DIRECTION('',(1.,0.,-0.)); +#356026 = ADVANCED_FACE('',(#356027),#356037,.T.); +#356027 = FACE_BOUND('',#356028,.F.); +#356028 = EDGE_LOOP('',(#356029,#356030,#356031,#356032,#356033,#356034, + #356035,#356036)); +#356029 = ORIENTED_EDGE('',*,*,#355768,.T.); +#356030 = ORIENTED_EDGE('',*,*,#355801,.T.); +#356031 = ORIENTED_EDGE('',*,*,#355832,.T.); +#356032 = ORIENTED_EDGE('',*,*,#355865,.T.); +#356033 = ORIENTED_EDGE('',*,*,#355896,.T.); +#356034 = ORIENTED_EDGE('',*,*,#355929,.T.); +#356035 = ORIENTED_EDGE('',*,*,#355960,.T.); +#356036 = ORIENTED_EDGE('',*,*,#355993,.T.); +#356037 = PLANE('',#356038); +#356038 = AXIS2_PLACEMENT_3D('',#356039,#356040,#356041); +#356039 = CARTESIAN_POINT('',(0.,0.,1.55)); +#356040 = DIRECTION('',(0.,0.,1.)); +#356041 = DIRECTION('',(1.,0.,-0.)); +#356042 = MANIFOLD_SOLID_BREP('',#356043); +#356043 = CLOSED_SHELL('',(#356044,#356086,#356117,#356150,#356181, + #356214,#356245,#356278,#356300,#356316)); +#356044 = ADVANCED_FACE('',(#356045),#356081,.T.); +#356045 = FACE_BOUND('',#356046,.T.); +#356046 = EDGE_LOOP('',(#356047,#356057,#356066,#356074)); +#356047 = ORIENTED_EDGE('',*,*,#356048,.T.); +#356048 = EDGE_CURVE('',#356049,#356051,#356053,.T.); +#356049 = VERTEX_POINT('',#356050); +#356050 = CARTESIAN_POINT('',(128.68,-154.135,1.51)); +#356051 = VERTEX_POINT('',#356052); +#356052 = CARTESIAN_POINT('',(128.68,-154.135,1.55)); +#356053 = LINE('',#356054,#356055); +#356054 = CARTESIAN_POINT('',(128.68,-154.135,1.51)); +#356055 = VECTOR('',#356056,1.); +#356056 = DIRECTION('',(0.,0.,1.)); +#356057 = ORIENTED_EDGE('',*,*,#356058,.T.); +#356058 = EDGE_CURVE('',#356051,#356059,#356061,.T.); +#356059 = VERTEX_POINT('',#356060); +#356060 = CARTESIAN_POINT('',(128.815,-154.,1.55)); +#356061 = CIRCLE('',#356062,0.135001418495); +#356062 = AXIS2_PLACEMENT_3D('',#356063,#356064,#356065); +#356063 = CARTESIAN_POINT('',(128.81500141848,-154.1350014184,1.55)); +#356064 = DIRECTION('',(0.,0.,-1.)); +#356065 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356066 = ORIENTED_EDGE('',*,*,#356067,.F.); +#356067 = EDGE_CURVE('',#356068,#356059,#356070,.T.); +#356068 = VERTEX_POINT('',#356069); +#356069 = CARTESIAN_POINT('',(128.815,-154.,1.51)); +#356070 = LINE('',#356071,#356072); +#356071 = CARTESIAN_POINT('',(128.815,-154.,1.51)); +#356072 = VECTOR('',#356073,1.); +#356073 = DIRECTION('',(0.,0.,1.)); +#356074 = ORIENTED_EDGE('',*,*,#356075,.F.); +#356075 = EDGE_CURVE('',#356049,#356068,#356076,.T.); +#356076 = CIRCLE('',#356077,0.135001418495); +#356077 = AXIS2_PLACEMENT_3D('',#356078,#356079,#356080); +#356078 = CARTESIAN_POINT('',(128.81500141848,-154.1350014184,1.51)); +#356079 = DIRECTION('',(0.,0.,-1.)); +#356080 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356081 = CYLINDRICAL_SURFACE('',#356082,0.135001418495); +#356082 = AXIS2_PLACEMENT_3D('',#356083,#356084,#356085); +#356083 = CARTESIAN_POINT('',(128.81500141848,-154.1350014184,1.51)); +#356084 = DIRECTION('',(0.,0.,-1.)); +#356085 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356086 = ADVANCED_FACE('',(#356087),#356112,.T.); +#356087 = FACE_BOUND('',#356088,.T.); +#356088 = EDGE_LOOP('',(#356089,#356090,#356098,#356106)); +#356089 = ORIENTED_EDGE('',*,*,#356067,.T.); +#356090 = ORIENTED_EDGE('',*,*,#356091,.T.); +#356091 = EDGE_CURVE('',#356059,#356092,#356094,.T.); +#356092 = VERTEX_POINT('',#356093); +#356093 = CARTESIAN_POINT('',(129.185,-154.,1.55)); +#356094 = LINE('',#356095,#356096); +#356095 = CARTESIAN_POINT('',(128.815,-154.,1.55)); +#356096 = VECTOR('',#356097,1.); +#356097 = DIRECTION('',(1.,0.,0.)); +#356098 = ORIENTED_EDGE('',*,*,#356099,.F.); +#356099 = EDGE_CURVE('',#356100,#356092,#356102,.T.); +#356100 = VERTEX_POINT('',#356101); +#356101 = CARTESIAN_POINT('',(129.185,-154.,1.51)); +#356102 = LINE('',#356103,#356104); +#356103 = CARTESIAN_POINT('',(129.185,-154.,1.51)); +#356104 = VECTOR('',#356105,1.); +#356105 = DIRECTION('',(0.,0.,1.)); +#356106 = ORIENTED_EDGE('',*,*,#356107,.F.); +#356107 = EDGE_CURVE('',#356068,#356100,#356108,.T.); +#356108 = LINE('',#356109,#356110); +#356109 = CARTESIAN_POINT('',(128.815,-154.,1.51)); +#356110 = VECTOR('',#356111,1.); +#356111 = DIRECTION('',(1.,0.,0.)); +#356112 = PLANE('',#356113); +#356113 = AXIS2_PLACEMENT_3D('',#356114,#356115,#356116); +#356114 = CARTESIAN_POINT('',(128.815,-154.,1.51)); +#356115 = DIRECTION('',(0.,1.,0.)); +#356116 = DIRECTION('',(1.,0.,0.)); +#356117 = ADVANCED_FACE('',(#356118),#356145,.T.); +#356118 = FACE_BOUND('',#356119,.T.); +#356119 = EDGE_LOOP('',(#356120,#356121,#356130,#356138)); +#356120 = ORIENTED_EDGE('',*,*,#356099,.T.); +#356121 = ORIENTED_EDGE('',*,*,#356122,.T.); +#356122 = EDGE_CURVE('',#356092,#356123,#356125,.T.); +#356123 = VERTEX_POINT('',#356124); +#356124 = CARTESIAN_POINT('',(129.32,-154.135,1.55)); +#356125 = CIRCLE('',#356126,0.135001418495); +#356126 = AXIS2_PLACEMENT_3D('',#356127,#356128,#356129); +#356127 = CARTESIAN_POINT('',(129.18499858151,-154.1350014184,1.55)); +#356128 = DIRECTION('',(0.,0.,-1.)); +#356129 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356130 = ORIENTED_EDGE('',*,*,#356131,.F.); +#356131 = EDGE_CURVE('',#356132,#356123,#356134,.T.); +#356132 = VERTEX_POINT('',#356133); +#356133 = CARTESIAN_POINT('',(129.32,-154.135,1.51)); +#356134 = LINE('',#356135,#356136); +#356135 = CARTESIAN_POINT('',(129.32,-154.135,1.51)); +#356136 = VECTOR('',#356137,1.); +#356137 = DIRECTION('',(0.,0.,1.)); +#356138 = ORIENTED_EDGE('',*,*,#356139,.F.); +#356139 = EDGE_CURVE('',#356100,#356132,#356140,.T.); +#356140 = CIRCLE('',#356141,0.135001418495); +#356141 = AXIS2_PLACEMENT_3D('',#356142,#356143,#356144); +#356142 = CARTESIAN_POINT('',(129.18499858151,-154.1350014184,1.51)); +#356143 = DIRECTION('',(0.,0.,-1.)); +#356144 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356145 = CYLINDRICAL_SURFACE('',#356146,0.135001418495); +#356146 = AXIS2_PLACEMENT_3D('',#356147,#356148,#356149); +#356147 = CARTESIAN_POINT('',(129.18499858151,-154.1350014184,1.51)); +#356148 = DIRECTION('',(0.,0.,-1.)); +#356149 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356150 = ADVANCED_FACE('',(#356151),#356176,.T.); +#356151 = FACE_BOUND('',#356152,.T.); +#356152 = EDGE_LOOP('',(#356153,#356154,#356162,#356170)); +#356153 = ORIENTED_EDGE('',*,*,#356131,.T.); +#356154 = ORIENTED_EDGE('',*,*,#356155,.T.); +#356155 = EDGE_CURVE('',#356123,#356156,#356158,.T.); +#356156 = VERTEX_POINT('',#356157); +#356157 = CARTESIAN_POINT('',(129.32,-154.405,1.55)); +#356158 = LINE('',#356159,#356160); +#356159 = CARTESIAN_POINT('',(129.32,-154.135,1.55)); +#356160 = VECTOR('',#356161,1.); +#356161 = DIRECTION('',(0.,-1.,0.)); +#356162 = ORIENTED_EDGE('',*,*,#356163,.F.); +#356163 = EDGE_CURVE('',#356164,#356156,#356166,.T.); +#356164 = VERTEX_POINT('',#356165); +#356165 = CARTESIAN_POINT('',(129.32,-154.405,1.51)); +#356166 = LINE('',#356167,#356168); +#356167 = CARTESIAN_POINT('',(129.32,-154.405,1.51)); +#356168 = VECTOR('',#356169,1.); +#356169 = DIRECTION('',(0.,0.,1.)); +#356170 = ORIENTED_EDGE('',*,*,#356171,.F.); +#356171 = EDGE_CURVE('',#356132,#356164,#356172,.T.); +#356172 = LINE('',#356173,#356174); +#356173 = CARTESIAN_POINT('',(129.32,-154.135,1.51)); +#356174 = VECTOR('',#356175,1.); +#356175 = DIRECTION('',(0.,-1.,0.)); +#356176 = PLANE('',#356177); +#356177 = AXIS2_PLACEMENT_3D('',#356178,#356179,#356180); +#356178 = CARTESIAN_POINT('',(129.32,-154.135,1.51)); +#356179 = DIRECTION('',(1.,0.,-0.)); +#356180 = DIRECTION('',(0.,-1.,0.)); +#356181 = ADVANCED_FACE('',(#356182),#356209,.T.); +#356182 = FACE_BOUND('',#356183,.T.); +#356183 = EDGE_LOOP('',(#356184,#356185,#356194,#356202)); +#356184 = ORIENTED_EDGE('',*,*,#356163,.T.); +#356185 = ORIENTED_EDGE('',*,*,#356186,.T.); +#356186 = EDGE_CURVE('',#356156,#356187,#356189,.T.); +#356187 = VERTEX_POINT('',#356188); +#356188 = CARTESIAN_POINT('',(129.185,-154.54,1.55)); +#356189 = CIRCLE('',#356190,0.135001418495); +#356190 = AXIS2_PLACEMENT_3D('',#356191,#356192,#356193); +#356191 = CARTESIAN_POINT('',(129.18499858151,-154.4049985815,1.55)); +#356192 = DIRECTION('',(0.,0.,-1.)); +#356193 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356194 = ORIENTED_EDGE('',*,*,#356195,.F.); +#356195 = EDGE_CURVE('',#356196,#356187,#356198,.T.); +#356196 = VERTEX_POINT('',#356197); +#356197 = CARTESIAN_POINT('',(129.185,-154.54,1.51)); +#356198 = LINE('',#356199,#356200); +#356199 = CARTESIAN_POINT('',(129.185,-154.54,1.51)); +#356200 = VECTOR('',#356201,1.); +#356201 = DIRECTION('',(0.,0.,1.)); +#356202 = ORIENTED_EDGE('',*,*,#356203,.F.); +#356203 = EDGE_CURVE('',#356164,#356196,#356204,.T.); +#356204 = CIRCLE('',#356205,0.135001418495); +#356205 = AXIS2_PLACEMENT_3D('',#356206,#356207,#356208); +#356206 = CARTESIAN_POINT('',(129.18499858151,-154.4049985815,1.51)); +#356207 = DIRECTION('',(0.,0.,-1.)); +#356208 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356209 = CYLINDRICAL_SURFACE('',#356210,0.135001418495); +#356210 = AXIS2_PLACEMENT_3D('',#356211,#356212,#356213); +#356211 = CARTESIAN_POINT('',(129.18499858151,-154.4049985815,1.51)); +#356212 = DIRECTION('',(0.,0.,-1.)); +#356213 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356214 = ADVANCED_FACE('',(#356215),#356240,.T.); +#356215 = FACE_BOUND('',#356216,.T.); +#356216 = EDGE_LOOP('',(#356217,#356218,#356226,#356234)); +#356217 = ORIENTED_EDGE('',*,*,#356195,.T.); +#356218 = ORIENTED_EDGE('',*,*,#356219,.T.); +#356219 = EDGE_CURVE('',#356187,#356220,#356222,.T.); +#356220 = VERTEX_POINT('',#356221); +#356221 = CARTESIAN_POINT('',(128.815,-154.54,1.55)); +#356222 = LINE('',#356223,#356224); +#356223 = CARTESIAN_POINT('',(129.185,-154.54,1.55)); +#356224 = VECTOR('',#356225,1.); +#356225 = DIRECTION('',(-1.,0.,0.)); +#356226 = ORIENTED_EDGE('',*,*,#356227,.F.); +#356227 = EDGE_CURVE('',#356228,#356220,#356230,.T.); +#356228 = VERTEX_POINT('',#356229); +#356229 = CARTESIAN_POINT('',(128.815,-154.54,1.51)); +#356230 = LINE('',#356231,#356232); +#356231 = CARTESIAN_POINT('',(128.815,-154.54,1.51)); +#356232 = VECTOR('',#356233,1.); +#356233 = DIRECTION('',(0.,0.,1.)); +#356234 = ORIENTED_EDGE('',*,*,#356235,.F.); +#356235 = EDGE_CURVE('',#356196,#356228,#356236,.T.); +#356236 = LINE('',#356237,#356238); +#356237 = CARTESIAN_POINT('',(129.185,-154.54,1.51)); +#356238 = VECTOR('',#356239,1.); +#356239 = DIRECTION('',(-1.,0.,0.)); +#356240 = PLANE('',#356241); +#356241 = AXIS2_PLACEMENT_3D('',#356242,#356243,#356244); +#356242 = CARTESIAN_POINT('',(129.185,-154.54,1.51)); +#356243 = DIRECTION('',(0.,-1.,0.)); +#356244 = DIRECTION('',(-1.,0.,0.)); +#356245 = ADVANCED_FACE('',(#356246),#356273,.T.); +#356246 = FACE_BOUND('',#356247,.T.); +#356247 = EDGE_LOOP('',(#356248,#356249,#356258,#356266)); +#356248 = ORIENTED_EDGE('',*,*,#356227,.T.); +#356249 = ORIENTED_EDGE('',*,*,#356250,.T.); +#356250 = EDGE_CURVE('',#356220,#356251,#356253,.T.); +#356251 = VERTEX_POINT('',#356252); +#356252 = CARTESIAN_POINT('',(128.68,-154.405,1.55)); +#356253 = CIRCLE('',#356254,0.135001418495); +#356254 = AXIS2_PLACEMENT_3D('',#356255,#356256,#356257); +#356255 = CARTESIAN_POINT('',(128.81500141848,-154.4049985815,1.55)); +#356256 = DIRECTION('',(0.,0.,-1.)); +#356257 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#356258 = ORIENTED_EDGE('',*,*,#356259,.F.); +#356259 = EDGE_CURVE('',#356260,#356251,#356262,.T.); +#356260 = VERTEX_POINT('',#356261); +#356261 = CARTESIAN_POINT('',(128.68,-154.405,1.51)); +#356262 = LINE('',#356263,#356264); +#356263 = CARTESIAN_POINT('',(128.68,-154.405,1.51)); +#356264 = VECTOR('',#356265,1.); +#356265 = DIRECTION('',(0.,0.,1.)); +#356266 = ORIENTED_EDGE('',*,*,#356267,.F.); +#356267 = EDGE_CURVE('',#356228,#356260,#356268,.T.); +#356268 = CIRCLE('',#356269,0.135001418495); +#356269 = AXIS2_PLACEMENT_3D('',#356270,#356271,#356272); +#356270 = CARTESIAN_POINT('',(128.81500141848,-154.4049985815,1.51)); +#356271 = DIRECTION('',(0.,0.,-1.)); +#356272 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#356273 = CYLINDRICAL_SURFACE('',#356274,0.135001418495); +#356274 = AXIS2_PLACEMENT_3D('',#356275,#356276,#356277); +#356275 = CARTESIAN_POINT('',(128.81500141848,-154.4049985815,1.51)); +#356276 = DIRECTION('',(0.,0.,-1.)); +#356277 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#356278 = ADVANCED_FACE('',(#356279),#356295,.T.); +#356279 = FACE_BOUND('',#356280,.T.); +#356280 = EDGE_LOOP('',(#356281,#356282,#356288,#356289)); +#356281 = ORIENTED_EDGE('',*,*,#356259,.T.); +#356282 = ORIENTED_EDGE('',*,*,#356283,.T.); +#356283 = EDGE_CURVE('',#356251,#356051,#356284,.T.); +#356284 = LINE('',#356285,#356286); +#356285 = CARTESIAN_POINT('',(128.68,-154.405,1.55)); +#356286 = VECTOR('',#356287,1.); +#356287 = DIRECTION('',(0.,1.,0.)); +#356288 = ORIENTED_EDGE('',*,*,#356048,.F.); +#356289 = ORIENTED_EDGE('',*,*,#356290,.F.); +#356290 = EDGE_CURVE('',#356260,#356049,#356291,.T.); +#356291 = LINE('',#356292,#356293); +#356292 = CARTESIAN_POINT('',(128.68,-154.405,1.51)); +#356293 = VECTOR('',#356294,1.); +#356294 = DIRECTION('',(0.,1.,0.)); +#356295 = PLANE('',#356296); +#356296 = AXIS2_PLACEMENT_3D('',#356297,#356298,#356299); +#356297 = CARTESIAN_POINT('',(128.68,-154.405,1.51)); +#356298 = DIRECTION('',(-1.,0.,0.)); +#356299 = DIRECTION('',(0.,1.,0.)); +#356300 = ADVANCED_FACE('',(#356301),#356311,.F.); +#356301 = FACE_BOUND('',#356302,.T.); +#356302 = EDGE_LOOP('',(#356303,#356304,#356305,#356306,#356307,#356308, + #356309,#356310)); +#356303 = ORIENTED_EDGE('',*,*,#356075,.T.); +#356304 = ORIENTED_EDGE('',*,*,#356107,.T.); +#356305 = ORIENTED_EDGE('',*,*,#356139,.T.); +#356306 = ORIENTED_EDGE('',*,*,#356171,.T.); +#356307 = ORIENTED_EDGE('',*,*,#356203,.T.); +#356308 = ORIENTED_EDGE('',*,*,#356235,.T.); +#356309 = ORIENTED_EDGE('',*,*,#356267,.T.); +#356310 = ORIENTED_EDGE('',*,*,#356290,.T.); +#356311 = PLANE('',#356312); +#356312 = AXIS2_PLACEMENT_3D('',#356313,#356314,#356315); +#356313 = CARTESIAN_POINT('',(0.,0.,1.51)); +#356314 = DIRECTION('',(0.,0.,1.)); +#356315 = DIRECTION('',(1.,0.,-0.)); +#356316 = ADVANCED_FACE('',(#356317),#356327,.T.); +#356317 = FACE_BOUND('',#356318,.F.); +#356318 = EDGE_LOOP('',(#356319,#356320,#356321,#356322,#356323,#356324, + #356325,#356326)); +#356319 = ORIENTED_EDGE('',*,*,#356058,.T.); +#356320 = ORIENTED_EDGE('',*,*,#356091,.T.); +#356321 = ORIENTED_EDGE('',*,*,#356122,.T.); +#356322 = ORIENTED_EDGE('',*,*,#356155,.T.); +#356323 = ORIENTED_EDGE('',*,*,#356186,.T.); +#356324 = ORIENTED_EDGE('',*,*,#356219,.T.); +#356325 = ORIENTED_EDGE('',*,*,#356250,.T.); +#356326 = ORIENTED_EDGE('',*,*,#356283,.T.); +#356327 = PLANE('',#356328); +#356328 = AXIS2_PLACEMENT_3D('',#356329,#356330,#356331); +#356329 = CARTESIAN_POINT('',(0.,0.,1.55)); +#356330 = DIRECTION('',(0.,0.,1.)); +#356331 = DIRECTION('',(1.,0.,-0.)); +#356332 = MANIFOLD_SOLID_BREP('',#356333); +#356333 = CLOSED_SHELL('',(#356334,#356374,#356405,#356436,#356458, + #356470)); +#356334 = ADVANCED_FACE('',(#356335),#356369,.T.); +#356335 = FACE_BOUND('',#356336,.T.); +#356336 = EDGE_LOOP('',(#356337,#356347,#356355,#356363)); +#356337 = ORIENTED_EDGE('',*,*,#356338,.T.); +#356338 = EDGE_CURVE('',#356339,#356341,#356343,.T.); +#356339 = VERTEX_POINT('',#356340); +#356340 = CARTESIAN_POINT('',(128.5,-81.61,1.51)); +#356341 = VERTEX_POINT('',#356342); +#356342 = CARTESIAN_POINT('',(128.5,-81.61,1.55)); +#356343 = LINE('',#356344,#356345); +#356344 = CARTESIAN_POINT('',(128.5,-81.61,1.51)); +#356345 = VECTOR('',#356346,1.); +#356346 = DIRECTION('',(0.,0.,1.)); +#356347 = ORIENTED_EDGE('',*,*,#356348,.T.); +#356348 = EDGE_CURVE('',#356341,#356349,#356351,.T.); +#356349 = VERTEX_POINT('',#356350); +#356350 = CARTESIAN_POINT('',(128.5,-80.71,1.55)); +#356351 = LINE('',#356352,#356353); +#356352 = CARTESIAN_POINT('',(128.5,-81.61,1.55)); +#356353 = VECTOR('',#356354,1.); +#356354 = DIRECTION('',(0.,1.,0.)); +#356355 = ORIENTED_EDGE('',*,*,#356356,.F.); +#356356 = EDGE_CURVE('',#356357,#356349,#356359,.T.); +#356357 = VERTEX_POINT('',#356358); +#356358 = CARTESIAN_POINT('',(128.5,-80.71,1.51)); +#356359 = LINE('',#356360,#356361); +#356360 = CARTESIAN_POINT('',(128.5,-80.71,1.51)); +#356361 = VECTOR('',#356362,1.); +#356362 = DIRECTION('',(0.,0.,1.)); +#356363 = ORIENTED_EDGE('',*,*,#356364,.F.); +#356364 = EDGE_CURVE('',#356339,#356357,#356365,.T.); +#356365 = LINE('',#356366,#356367); +#356366 = CARTESIAN_POINT('',(128.5,-81.61,1.51)); +#356367 = VECTOR('',#356368,1.); +#356368 = DIRECTION('',(0.,1.,0.)); +#356369 = PLANE('',#356370); +#356370 = AXIS2_PLACEMENT_3D('',#356371,#356372,#356373); +#356371 = CARTESIAN_POINT('',(128.5,-81.61,1.51)); +#356372 = DIRECTION('',(-1.,0.,0.)); +#356373 = DIRECTION('',(0.,1.,0.)); +#356374 = ADVANCED_FACE('',(#356375),#356400,.T.); +#356375 = FACE_BOUND('',#356376,.T.); +#356376 = EDGE_LOOP('',(#356377,#356378,#356386,#356394)); +#356377 = ORIENTED_EDGE('',*,*,#356356,.T.); +#356378 = ORIENTED_EDGE('',*,*,#356379,.T.); +#356379 = EDGE_CURVE('',#356349,#356380,#356382,.T.); +#356380 = VERTEX_POINT('',#356381); +#356381 = CARTESIAN_POINT('',(130.,-80.71,1.55)); +#356382 = LINE('',#356383,#356384); +#356383 = CARTESIAN_POINT('',(128.5,-80.71,1.55)); +#356384 = VECTOR('',#356385,1.); +#356385 = DIRECTION('',(1.,0.,0.)); +#356386 = ORIENTED_EDGE('',*,*,#356387,.F.); +#356387 = EDGE_CURVE('',#356388,#356380,#356390,.T.); +#356388 = VERTEX_POINT('',#356389); +#356389 = CARTESIAN_POINT('',(130.,-80.71,1.51)); +#356390 = LINE('',#356391,#356392); +#356391 = CARTESIAN_POINT('',(130.,-80.71,1.51)); +#356392 = VECTOR('',#356393,1.); +#356393 = DIRECTION('',(0.,0.,1.)); +#356394 = ORIENTED_EDGE('',*,*,#356395,.F.); +#356395 = EDGE_CURVE('',#356357,#356388,#356396,.T.); +#356396 = LINE('',#356397,#356398); +#356397 = CARTESIAN_POINT('',(128.5,-80.71,1.51)); +#356398 = VECTOR('',#356399,1.); +#356399 = DIRECTION('',(1.,0.,0.)); +#356400 = PLANE('',#356401); +#356401 = AXIS2_PLACEMENT_3D('',#356402,#356403,#356404); +#356402 = CARTESIAN_POINT('',(128.5,-80.71,1.51)); +#356403 = DIRECTION('',(0.,1.,0.)); +#356404 = DIRECTION('',(1.,0.,0.)); +#356405 = ADVANCED_FACE('',(#356406),#356431,.T.); +#356406 = FACE_BOUND('',#356407,.T.); +#356407 = EDGE_LOOP('',(#356408,#356409,#356417,#356425)); +#356408 = ORIENTED_EDGE('',*,*,#356387,.T.); +#356409 = ORIENTED_EDGE('',*,*,#356410,.T.); +#356410 = EDGE_CURVE('',#356380,#356411,#356413,.T.); +#356411 = VERTEX_POINT('',#356412); +#356412 = CARTESIAN_POINT('',(130.,-81.61,1.55)); +#356413 = LINE('',#356414,#356415); +#356414 = CARTESIAN_POINT('',(130.,-80.71,1.55)); +#356415 = VECTOR('',#356416,1.); +#356416 = DIRECTION('',(0.,-1.,0.)); +#356417 = ORIENTED_EDGE('',*,*,#356418,.F.); +#356418 = EDGE_CURVE('',#356419,#356411,#356421,.T.); +#356419 = VERTEX_POINT('',#356420); +#356420 = CARTESIAN_POINT('',(130.,-81.61,1.51)); +#356421 = LINE('',#356422,#356423); +#356422 = CARTESIAN_POINT('',(130.,-81.61,1.51)); +#356423 = VECTOR('',#356424,1.); +#356424 = DIRECTION('',(0.,0.,1.)); +#356425 = ORIENTED_EDGE('',*,*,#356426,.F.); +#356426 = EDGE_CURVE('',#356388,#356419,#356427,.T.); +#356427 = LINE('',#356428,#356429); +#356428 = CARTESIAN_POINT('',(130.,-80.71,1.51)); +#356429 = VECTOR('',#356430,1.); +#356430 = DIRECTION('',(0.,-1.,0.)); +#356431 = PLANE('',#356432); +#356432 = AXIS2_PLACEMENT_3D('',#356433,#356434,#356435); +#356433 = CARTESIAN_POINT('',(130.,-80.71,1.51)); +#356434 = DIRECTION('',(1.,0.,-0.)); +#356435 = DIRECTION('',(0.,-1.,0.)); +#356436 = ADVANCED_FACE('',(#356437),#356453,.T.); +#356437 = FACE_BOUND('',#356438,.T.); +#356438 = EDGE_LOOP('',(#356439,#356440,#356446,#356447)); +#356439 = ORIENTED_EDGE('',*,*,#356418,.T.); +#356440 = ORIENTED_EDGE('',*,*,#356441,.T.); +#356441 = EDGE_CURVE('',#356411,#356341,#356442,.T.); +#356442 = LINE('',#356443,#356444); +#356443 = CARTESIAN_POINT('',(130.,-81.61,1.55)); +#356444 = VECTOR('',#356445,1.); +#356445 = DIRECTION('',(-1.,0.,0.)); +#356446 = ORIENTED_EDGE('',*,*,#356338,.F.); +#356447 = ORIENTED_EDGE('',*,*,#356448,.F.); +#356448 = EDGE_CURVE('',#356419,#356339,#356449,.T.); +#356449 = LINE('',#356450,#356451); +#356450 = CARTESIAN_POINT('',(130.,-81.61,1.51)); +#356451 = VECTOR('',#356452,1.); +#356452 = DIRECTION('',(-1.,0.,0.)); +#356453 = PLANE('',#356454); +#356454 = AXIS2_PLACEMENT_3D('',#356455,#356456,#356457); +#356455 = CARTESIAN_POINT('',(130.,-81.61,1.51)); +#356456 = DIRECTION('',(0.,-1.,0.)); +#356457 = DIRECTION('',(-1.,0.,0.)); +#356458 = ADVANCED_FACE('',(#356459),#356465,.F.); +#356459 = FACE_BOUND('',#356460,.T.); +#356460 = EDGE_LOOP('',(#356461,#356462,#356463,#356464)); +#356461 = ORIENTED_EDGE('',*,*,#356364,.T.); +#356462 = ORIENTED_EDGE('',*,*,#356395,.T.); +#356463 = ORIENTED_EDGE('',*,*,#356426,.T.); +#356464 = ORIENTED_EDGE('',*,*,#356448,.T.); +#356465 = PLANE('',#356466); +#356466 = AXIS2_PLACEMENT_3D('',#356467,#356468,#356469); +#356467 = CARTESIAN_POINT('',(0.,0.,1.51)); +#356468 = DIRECTION('',(0.,0.,1.)); +#356469 = DIRECTION('',(1.,0.,-0.)); +#356470 = ADVANCED_FACE('',(#356471),#356477,.T.); +#356471 = FACE_BOUND('',#356472,.F.); +#356472 = EDGE_LOOP('',(#356473,#356474,#356475,#356476)); +#356473 = ORIENTED_EDGE('',*,*,#356348,.T.); +#356474 = ORIENTED_EDGE('',*,*,#356379,.T.); +#356475 = ORIENTED_EDGE('',*,*,#356410,.T.); +#356476 = ORIENTED_EDGE('',*,*,#356441,.T.); +#356477 = PLANE('',#356478); +#356478 = AXIS2_PLACEMENT_3D('',#356479,#356480,#356481); +#356479 = CARTESIAN_POINT('',(0.,0.,1.55)); +#356480 = DIRECTION('',(0.,0.,1.)); +#356481 = DIRECTION('',(1.,0.,-0.)); +#356482 = MANIFOLD_SOLID_BREP('',#356483); +#356483 = CLOSED_SHELL('',(#356484,#356526,#356557,#356590,#356621, + #356654,#356685,#356718,#356740,#356756)); +#356484 = ADVANCED_FACE('',(#356485),#356521,.T.); +#356485 = FACE_BOUND('',#356486,.T.); +#356486 = EDGE_LOOP('',(#356487,#356497,#356506,#356514)); +#356487 = ORIENTED_EDGE('',*,*,#356488,.T.); +#356488 = EDGE_CURVE('',#356489,#356491,#356493,.T.); +#356489 = VERTEX_POINT('',#356490); +#356490 = CARTESIAN_POINT('',(128.68,-153.115,1.51)); +#356491 = VERTEX_POINT('',#356492); +#356492 = CARTESIAN_POINT('',(128.68,-153.115,1.55)); +#356493 = LINE('',#356494,#356495); +#356494 = CARTESIAN_POINT('',(128.68,-153.115,1.51)); +#356495 = VECTOR('',#356496,1.); +#356496 = DIRECTION('',(0.,0.,1.)); +#356497 = ORIENTED_EDGE('',*,*,#356498,.T.); +#356498 = EDGE_CURVE('',#356491,#356499,#356501,.T.); +#356499 = VERTEX_POINT('',#356500); +#356500 = CARTESIAN_POINT('',(128.815,-152.98,1.55)); +#356501 = CIRCLE('',#356502,0.135001418495); +#356502 = AXIS2_PLACEMENT_3D('',#356503,#356504,#356505); +#356503 = CARTESIAN_POINT('',(128.81500141848,-153.1150014184,1.55)); +#356504 = DIRECTION('',(0.,0.,-1.)); +#356505 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#356506 = ORIENTED_EDGE('',*,*,#356507,.F.); +#356507 = EDGE_CURVE('',#356508,#356499,#356510,.T.); +#356508 = VERTEX_POINT('',#356509); +#356509 = CARTESIAN_POINT('',(128.815,-152.98,1.51)); +#356510 = LINE('',#356511,#356512); +#356511 = CARTESIAN_POINT('',(128.815,-152.98,1.51)); +#356512 = VECTOR('',#356513,1.); +#356513 = DIRECTION('',(0.,0.,1.)); +#356514 = ORIENTED_EDGE('',*,*,#356515,.F.); +#356515 = EDGE_CURVE('',#356489,#356508,#356516,.T.); +#356516 = CIRCLE('',#356517,0.135001418495); +#356517 = AXIS2_PLACEMENT_3D('',#356518,#356519,#356520); +#356518 = CARTESIAN_POINT('',(128.81500141848,-153.1150014184,1.51)); +#356519 = DIRECTION('',(0.,0.,-1.)); +#356520 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#356521 = CYLINDRICAL_SURFACE('',#356522,0.135001418495); +#356522 = AXIS2_PLACEMENT_3D('',#356523,#356524,#356525); +#356523 = CARTESIAN_POINT('',(128.81500141848,-153.1150014184,1.51)); +#356524 = DIRECTION('',(0.,0.,-1.)); +#356525 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#356526 = ADVANCED_FACE('',(#356527),#356552,.T.); +#356527 = FACE_BOUND('',#356528,.T.); +#356528 = EDGE_LOOP('',(#356529,#356530,#356538,#356546)); +#356529 = ORIENTED_EDGE('',*,*,#356507,.T.); +#356530 = ORIENTED_EDGE('',*,*,#356531,.T.); +#356531 = EDGE_CURVE('',#356499,#356532,#356534,.T.); +#356532 = VERTEX_POINT('',#356533); +#356533 = CARTESIAN_POINT('',(129.185,-152.98,1.55)); +#356534 = LINE('',#356535,#356536); +#356535 = CARTESIAN_POINT('',(128.815,-152.98,1.55)); +#356536 = VECTOR('',#356537,1.); +#356537 = DIRECTION('',(1.,0.,0.)); +#356538 = ORIENTED_EDGE('',*,*,#356539,.F.); +#356539 = EDGE_CURVE('',#356540,#356532,#356542,.T.); +#356540 = VERTEX_POINT('',#356541); +#356541 = CARTESIAN_POINT('',(129.185,-152.98,1.51)); +#356542 = LINE('',#356543,#356544); +#356543 = CARTESIAN_POINT('',(129.185,-152.98,1.51)); +#356544 = VECTOR('',#356545,1.); +#356545 = DIRECTION('',(0.,0.,1.)); +#356546 = ORIENTED_EDGE('',*,*,#356547,.F.); +#356547 = EDGE_CURVE('',#356508,#356540,#356548,.T.); +#356548 = LINE('',#356549,#356550); +#356549 = CARTESIAN_POINT('',(128.815,-152.98,1.51)); +#356550 = VECTOR('',#356551,1.); +#356551 = DIRECTION('',(1.,0.,0.)); +#356552 = PLANE('',#356553); +#356553 = AXIS2_PLACEMENT_3D('',#356554,#356555,#356556); +#356554 = CARTESIAN_POINT('',(128.815,-152.98,1.51)); +#356555 = DIRECTION('',(0.,1.,0.)); +#356556 = DIRECTION('',(1.,0.,0.)); +#356557 = ADVANCED_FACE('',(#356558),#356585,.T.); +#356558 = FACE_BOUND('',#356559,.T.); +#356559 = EDGE_LOOP('',(#356560,#356561,#356570,#356578)); +#356560 = ORIENTED_EDGE('',*,*,#356539,.T.); +#356561 = ORIENTED_EDGE('',*,*,#356562,.T.); +#356562 = EDGE_CURVE('',#356532,#356563,#356565,.T.); +#356563 = VERTEX_POINT('',#356564); +#356564 = CARTESIAN_POINT('',(129.32,-153.115,1.55)); +#356565 = CIRCLE('',#356566,0.135001418495); +#356566 = AXIS2_PLACEMENT_3D('',#356567,#356568,#356569); +#356567 = CARTESIAN_POINT('',(129.18499858151,-153.1150014184,1.55)); +#356568 = DIRECTION('',(0.,0.,-1.)); +#356569 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356570 = ORIENTED_EDGE('',*,*,#356571,.F.); +#356571 = EDGE_CURVE('',#356572,#356563,#356574,.T.); +#356572 = VERTEX_POINT('',#356573); +#356573 = CARTESIAN_POINT('',(129.32,-153.115,1.51)); +#356574 = LINE('',#356575,#356576); +#356575 = CARTESIAN_POINT('',(129.32,-153.115,1.51)); +#356576 = VECTOR('',#356577,1.); +#356577 = DIRECTION('',(0.,0.,1.)); +#356578 = ORIENTED_EDGE('',*,*,#356579,.F.); +#356579 = EDGE_CURVE('',#356540,#356572,#356580,.T.); +#356580 = CIRCLE('',#356581,0.135001418495); +#356581 = AXIS2_PLACEMENT_3D('',#356582,#356583,#356584); +#356582 = CARTESIAN_POINT('',(129.18499858151,-153.1150014184,1.51)); +#356583 = DIRECTION('',(0.,0.,-1.)); +#356584 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356585 = CYLINDRICAL_SURFACE('',#356586,0.135001418495); +#356586 = AXIS2_PLACEMENT_3D('',#356587,#356588,#356589); +#356587 = CARTESIAN_POINT('',(129.18499858151,-153.1150014184,1.51)); +#356588 = DIRECTION('',(0.,0.,-1.)); +#356589 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#356590 = ADVANCED_FACE('',(#356591),#356616,.T.); +#356591 = FACE_BOUND('',#356592,.T.); +#356592 = EDGE_LOOP('',(#356593,#356594,#356602,#356610)); +#356593 = ORIENTED_EDGE('',*,*,#356571,.T.); +#356594 = ORIENTED_EDGE('',*,*,#356595,.T.); +#356595 = EDGE_CURVE('',#356563,#356596,#356598,.T.); +#356596 = VERTEX_POINT('',#356597); +#356597 = CARTESIAN_POINT('',(129.32,-153.385,1.55)); +#356598 = LINE('',#356599,#356600); +#356599 = CARTESIAN_POINT('',(129.32,-153.115,1.55)); +#356600 = VECTOR('',#356601,1.); +#356601 = DIRECTION('',(0.,-1.,0.)); +#356602 = ORIENTED_EDGE('',*,*,#356603,.F.); +#356603 = EDGE_CURVE('',#356604,#356596,#356606,.T.); +#356604 = VERTEX_POINT('',#356605); +#356605 = CARTESIAN_POINT('',(129.32,-153.385,1.51)); +#356606 = LINE('',#356607,#356608); +#356607 = CARTESIAN_POINT('',(129.32,-153.385,1.51)); +#356608 = VECTOR('',#356609,1.); +#356609 = DIRECTION('',(0.,0.,1.)); +#356610 = ORIENTED_EDGE('',*,*,#356611,.F.); +#356611 = EDGE_CURVE('',#356572,#356604,#356612,.T.); +#356612 = LINE('',#356613,#356614); +#356613 = CARTESIAN_POINT('',(129.32,-153.115,1.51)); +#356614 = VECTOR('',#356615,1.); +#356615 = DIRECTION('',(0.,-1.,0.)); +#356616 = PLANE('',#356617); +#356617 = AXIS2_PLACEMENT_3D('',#356618,#356619,#356620); +#356618 = CARTESIAN_POINT('',(129.32,-153.115,1.51)); +#356619 = DIRECTION('',(1.,0.,-0.)); +#356620 = DIRECTION('',(0.,-1.,0.)); +#356621 = ADVANCED_FACE('',(#356622),#356649,.T.); +#356622 = FACE_BOUND('',#356623,.T.); +#356623 = EDGE_LOOP('',(#356624,#356625,#356634,#356642)); +#356624 = ORIENTED_EDGE('',*,*,#356603,.T.); +#356625 = ORIENTED_EDGE('',*,*,#356626,.T.); +#356626 = EDGE_CURVE('',#356596,#356627,#356629,.T.); +#356627 = VERTEX_POINT('',#356628); +#356628 = CARTESIAN_POINT('',(129.185,-153.52,1.55)); +#356629 = CIRCLE('',#356630,0.135001418495); +#356630 = AXIS2_PLACEMENT_3D('',#356631,#356632,#356633); +#356631 = CARTESIAN_POINT('',(129.18499858151,-153.3849985815,1.55)); +#356632 = DIRECTION('',(0.,0.,-1.)); +#356633 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356634 = ORIENTED_EDGE('',*,*,#356635,.F.); +#356635 = EDGE_CURVE('',#356636,#356627,#356638,.T.); +#356636 = VERTEX_POINT('',#356637); +#356637 = CARTESIAN_POINT('',(129.185,-153.52,1.51)); +#356638 = LINE('',#356639,#356640); +#356639 = CARTESIAN_POINT('',(129.185,-153.52,1.51)); +#356640 = VECTOR('',#356641,1.); +#356641 = DIRECTION('',(0.,0.,1.)); +#356642 = ORIENTED_EDGE('',*,*,#356643,.F.); +#356643 = EDGE_CURVE('',#356604,#356636,#356644,.T.); +#356644 = CIRCLE('',#356645,0.135001418495); +#356645 = AXIS2_PLACEMENT_3D('',#356646,#356647,#356648); +#356646 = CARTESIAN_POINT('',(129.18499858151,-153.3849985815,1.51)); +#356647 = DIRECTION('',(0.,0.,-1.)); +#356648 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356649 = CYLINDRICAL_SURFACE('',#356650,0.135001418495); +#356650 = AXIS2_PLACEMENT_3D('',#356651,#356652,#356653); +#356651 = CARTESIAN_POINT('',(129.18499858151,-153.3849985815,1.51)); +#356652 = DIRECTION('',(0.,0.,-1.)); +#356653 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#356654 = ADVANCED_FACE('',(#356655),#356680,.T.); +#356655 = FACE_BOUND('',#356656,.T.); +#356656 = EDGE_LOOP('',(#356657,#356658,#356666,#356674)); +#356657 = ORIENTED_EDGE('',*,*,#356635,.T.); +#356658 = ORIENTED_EDGE('',*,*,#356659,.T.); +#356659 = EDGE_CURVE('',#356627,#356660,#356662,.T.); +#356660 = VERTEX_POINT('',#356661); +#356661 = CARTESIAN_POINT('',(128.815,-153.52,1.55)); +#356662 = LINE('',#356663,#356664); +#356663 = CARTESIAN_POINT('',(129.185,-153.52,1.55)); +#356664 = VECTOR('',#356665,1.); +#356665 = DIRECTION('',(-1.,0.,0.)); +#356666 = ORIENTED_EDGE('',*,*,#356667,.F.); +#356667 = EDGE_CURVE('',#356668,#356660,#356670,.T.); +#356668 = VERTEX_POINT('',#356669); +#356669 = CARTESIAN_POINT('',(128.815,-153.52,1.51)); +#356670 = LINE('',#356671,#356672); +#356671 = CARTESIAN_POINT('',(128.815,-153.52,1.51)); +#356672 = VECTOR('',#356673,1.); +#356673 = DIRECTION('',(0.,0.,1.)); +#356674 = ORIENTED_EDGE('',*,*,#356675,.F.); +#356675 = EDGE_CURVE('',#356636,#356668,#356676,.T.); +#356676 = LINE('',#356677,#356678); +#356677 = CARTESIAN_POINT('',(129.185,-153.52,1.51)); +#356678 = VECTOR('',#356679,1.); +#356679 = DIRECTION('',(-1.,0.,0.)); +#356680 = PLANE('',#356681); +#356681 = AXIS2_PLACEMENT_3D('',#356682,#356683,#356684); +#356682 = CARTESIAN_POINT('',(129.185,-153.52,1.51)); +#356683 = DIRECTION('',(0.,-1.,0.)); +#356684 = DIRECTION('',(-1.,0.,0.)); +#356685 = ADVANCED_FACE('',(#356686),#356713,.T.); +#356686 = FACE_BOUND('',#356687,.T.); +#356687 = EDGE_LOOP('',(#356688,#356689,#356698,#356706)); +#356688 = ORIENTED_EDGE('',*,*,#356667,.T.); +#356689 = ORIENTED_EDGE('',*,*,#356690,.T.); +#356690 = EDGE_CURVE('',#356660,#356691,#356693,.T.); +#356691 = VERTEX_POINT('',#356692); +#356692 = CARTESIAN_POINT('',(128.68,-153.385,1.55)); +#356693 = CIRCLE('',#356694,0.135001418495); +#356694 = AXIS2_PLACEMENT_3D('',#356695,#356696,#356697); +#356695 = CARTESIAN_POINT('',(128.81500141848,-153.3849985815,1.55)); +#356696 = DIRECTION('',(0.,0.,-1.)); +#356697 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#356698 = ORIENTED_EDGE('',*,*,#356699,.F.); +#356699 = EDGE_CURVE('',#356700,#356691,#356702,.T.); +#356700 = VERTEX_POINT('',#356701); +#356701 = CARTESIAN_POINT('',(128.68,-153.385,1.51)); +#356702 = LINE('',#356703,#356704); +#356703 = CARTESIAN_POINT('',(128.68,-153.385,1.51)); +#356704 = VECTOR('',#356705,1.); +#356705 = DIRECTION('',(0.,0.,1.)); +#356706 = ORIENTED_EDGE('',*,*,#356707,.F.); +#356707 = EDGE_CURVE('',#356668,#356700,#356708,.T.); +#356708 = CIRCLE('',#356709,0.135001418495); +#356709 = AXIS2_PLACEMENT_3D('',#356710,#356711,#356712); +#356710 = CARTESIAN_POINT('',(128.81500141848,-153.3849985815,1.51)); +#356711 = DIRECTION('',(0.,0.,-1.)); +#356712 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#356713 = CYLINDRICAL_SURFACE('',#356714,0.135001418495); +#356714 = AXIS2_PLACEMENT_3D('',#356715,#356716,#356717); +#356715 = CARTESIAN_POINT('',(128.81500141848,-153.3849985815,1.51)); +#356716 = DIRECTION('',(0.,0.,-1.)); +#356717 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#356718 = ADVANCED_FACE('',(#356719),#356735,.T.); +#356719 = FACE_BOUND('',#356720,.T.); +#356720 = EDGE_LOOP('',(#356721,#356722,#356728,#356729)); +#356721 = ORIENTED_EDGE('',*,*,#356699,.T.); +#356722 = ORIENTED_EDGE('',*,*,#356723,.T.); +#356723 = EDGE_CURVE('',#356691,#356491,#356724,.T.); +#356724 = LINE('',#356725,#356726); +#356725 = CARTESIAN_POINT('',(128.68,-153.385,1.55)); +#356726 = VECTOR('',#356727,1.); +#356727 = DIRECTION('',(0.,1.,0.)); +#356728 = ORIENTED_EDGE('',*,*,#356488,.F.); +#356729 = ORIENTED_EDGE('',*,*,#356730,.F.); +#356730 = EDGE_CURVE('',#356700,#356489,#356731,.T.); +#356731 = LINE('',#356732,#356733); +#356732 = CARTESIAN_POINT('',(128.68,-153.385,1.51)); +#356733 = VECTOR('',#356734,1.); +#356734 = DIRECTION('',(0.,1.,0.)); +#356735 = PLANE('',#356736); +#356736 = AXIS2_PLACEMENT_3D('',#356737,#356738,#356739); +#356737 = CARTESIAN_POINT('',(128.68,-153.385,1.51)); +#356738 = DIRECTION('',(-1.,0.,0.)); +#356739 = DIRECTION('',(0.,1.,0.)); +#356740 = ADVANCED_FACE('',(#356741),#356751,.F.); +#356741 = FACE_BOUND('',#356742,.T.); +#356742 = EDGE_LOOP('',(#356743,#356744,#356745,#356746,#356747,#356748, + #356749,#356750)); +#356743 = ORIENTED_EDGE('',*,*,#356515,.T.); +#356744 = ORIENTED_EDGE('',*,*,#356547,.T.); +#356745 = ORIENTED_EDGE('',*,*,#356579,.T.); +#356746 = ORIENTED_EDGE('',*,*,#356611,.T.); +#356747 = ORIENTED_EDGE('',*,*,#356643,.T.); +#356748 = ORIENTED_EDGE('',*,*,#356675,.T.); +#356749 = ORIENTED_EDGE('',*,*,#356707,.T.); +#356750 = ORIENTED_EDGE('',*,*,#356730,.T.); +#356751 = PLANE('',#356752); +#356752 = AXIS2_PLACEMENT_3D('',#356753,#356754,#356755); +#356753 = CARTESIAN_POINT('',(0.,0.,1.51)); +#356754 = DIRECTION('',(0.,0.,1.)); +#356755 = DIRECTION('',(1.,0.,-0.)); +#356756 = ADVANCED_FACE('',(#356757),#356767,.T.); +#356757 = FACE_BOUND('',#356758,.F.); +#356758 = EDGE_LOOP('',(#356759,#356760,#356761,#356762,#356763,#356764, + #356765,#356766)); +#356759 = ORIENTED_EDGE('',*,*,#356498,.T.); +#356760 = ORIENTED_EDGE('',*,*,#356531,.T.); +#356761 = ORIENTED_EDGE('',*,*,#356562,.T.); +#356762 = ORIENTED_EDGE('',*,*,#356595,.T.); +#356763 = ORIENTED_EDGE('',*,*,#356626,.T.); +#356764 = ORIENTED_EDGE('',*,*,#356659,.T.); +#356765 = ORIENTED_EDGE('',*,*,#356690,.T.); +#356766 = ORIENTED_EDGE('',*,*,#356723,.T.); +#356767 = PLANE('',#356768); +#356768 = AXIS2_PLACEMENT_3D('',#356769,#356770,#356771); +#356769 = CARTESIAN_POINT('',(0.,0.,1.55)); +#356770 = DIRECTION('',(0.,0.,1.)); +#356771 = DIRECTION('',(1.,0.,-0.)); +#356772 = MANIFOLD_SOLID_BREP('',#356773); +#356773 = CLOSED_SHELL('',(#356774,#356814,#356845,#356876,#356898, + #356910)); +#356774 = ADVANCED_FACE('',(#356775),#356809,.T.); +#356775 = FACE_BOUND('',#356776,.T.); +#356776 = EDGE_LOOP('',(#356777,#356787,#356795,#356803)); +#356777 = ORIENTED_EDGE('',*,*,#356778,.T.); +#356778 = EDGE_CURVE('',#356779,#356781,#356783,.T.); +#356779 = VERTEX_POINT('',#356780); +#356780 = CARTESIAN_POINT('',(128.5,-72.72,1.51)); +#356781 = VERTEX_POINT('',#356782); +#356782 = CARTESIAN_POINT('',(128.5,-72.72,1.55)); +#356783 = LINE('',#356784,#356785); +#356784 = CARTESIAN_POINT('',(128.5,-72.72,1.51)); +#356785 = VECTOR('',#356786,1.); +#356786 = DIRECTION('',(0.,0.,1.)); +#356787 = ORIENTED_EDGE('',*,*,#356788,.T.); +#356788 = EDGE_CURVE('',#356781,#356789,#356791,.T.); +#356789 = VERTEX_POINT('',#356790); +#356790 = CARTESIAN_POINT('',(128.5,-71.82,1.55)); +#356791 = LINE('',#356792,#356793); +#356792 = CARTESIAN_POINT('',(128.5,-72.72,1.55)); +#356793 = VECTOR('',#356794,1.); +#356794 = DIRECTION('',(0.,1.,0.)); +#356795 = ORIENTED_EDGE('',*,*,#356796,.F.); +#356796 = EDGE_CURVE('',#356797,#356789,#356799,.T.); +#356797 = VERTEX_POINT('',#356798); +#356798 = CARTESIAN_POINT('',(128.5,-71.82,1.51)); +#356799 = LINE('',#356800,#356801); +#356800 = CARTESIAN_POINT('',(128.5,-71.82,1.51)); +#356801 = VECTOR('',#356802,1.); +#356802 = DIRECTION('',(0.,0.,1.)); +#356803 = ORIENTED_EDGE('',*,*,#356804,.F.); +#356804 = EDGE_CURVE('',#356779,#356797,#356805,.T.); +#356805 = LINE('',#356806,#356807); +#356806 = CARTESIAN_POINT('',(128.5,-72.72,1.51)); +#356807 = VECTOR('',#356808,1.); +#356808 = DIRECTION('',(0.,1.,0.)); +#356809 = PLANE('',#356810); +#356810 = AXIS2_PLACEMENT_3D('',#356811,#356812,#356813); +#356811 = CARTESIAN_POINT('',(128.5,-72.72,1.51)); +#356812 = DIRECTION('',(-1.,0.,0.)); +#356813 = DIRECTION('',(0.,1.,0.)); +#356814 = ADVANCED_FACE('',(#356815),#356840,.T.); +#356815 = FACE_BOUND('',#356816,.T.); +#356816 = EDGE_LOOP('',(#356817,#356818,#356826,#356834)); +#356817 = ORIENTED_EDGE('',*,*,#356796,.T.); +#356818 = ORIENTED_EDGE('',*,*,#356819,.T.); +#356819 = EDGE_CURVE('',#356789,#356820,#356822,.T.); +#356820 = VERTEX_POINT('',#356821); +#356821 = CARTESIAN_POINT('',(130.,-71.82,1.55)); +#356822 = LINE('',#356823,#356824); +#356823 = CARTESIAN_POINT('',(128.5,-71.82,1.55)); +#356824 = VECTOR('',#356825,1.); +#356825 = DIRECTION('',(1.,0.,0.)); +#356826 = ORIENTED_EDGE('',*,*,#356827,.F.); +#356827 = EDGE_CURVE('',#356828,#356820,#356830,.T.); +#356828 = VERTEX_POINT('',#356829); +#356829 = CARTESIAN_POINT('',(130.,-71.82,1.51)); +#356830 = LINE('',#356831,#356832); +#356831 = CARTESIAN_POINT('',(130.,-71.82,1.51)); +#356832 = VECTOR('',#356833,1.); +#356833 = DIRECTION('',(0.,0.,1.)); +#356834 = ORIENTED_EDGE('',*,*,#356835,.F.); +#356835 = EDGE_CURVE('',#356797,#356828,#356836,.T.); +#356836 = LINE('',#356837,#356838); +#356837 = CARTESIAN_POINT('',(128.5,-71.82,1.51)); +#356838 = VECTOR('',#356839,1.); +#356839 = DIRECTION('',(1.,0.,0.)); +#356840 = PLANE('',#356841); +#356841 = AXIS2_PLACEMENT_3D('',#356842,#356843,#356844); +#356842 = CARTESIAN_POINT('',(128.5,-71.82,1.51)); +#356843 = DIRECTION('',(0.,1.,0.)); +#356844 = DIRECTION('',(1.,0.,0.)); +#356845 = ADVANCED_FACE('',(#356846),#356871,.T.); +#356846 = FACE_BOUND('',#356847,.T.); +#356847 = EDGE_LOOP('',(#356848,#356849,#356857,#356865)); +#356848 = ORIENTED_EDGE('',*,*,#356827,.T.); +#356849 = ORIENTED_EDGE('',*,*,#356850,.T.); +#356850 = EDGE_CURVE('',#356820,#356851,#356853,.T.); +#356851 = VERTEX_POINT('',#356852); +#356852 = CARTESIAN_POINT('',(130.,-72.72,1.55)); +#356853 = LINE('',#356854,#356855); +#356854 = CARTESIAN_POINT('',(130.,-71.82,1.55)); +#356855 = VECTOR('',#356856,1.); +#356856 = DIRECTION('',(0.,-1.,0.)); +#356857 = ORIENTED_EDGE('',*,*,#356858,.F.); +#356858 = EDGE_CURVE('',#356859,#356851,#356861,.T.); +#356859 = VERTEX_POINT('',#356860); +#356860 = CARTESIAN_POINT('',(130.,-72.72,1.51)); +#356861 = LINE('',#356862,#356863); +#356862 = CARTESIAN_POINT('',(130.,-72.72,1.51)); +#356863 = VECTOR('',#356864,1.); +#356864 = DIRECTION('',(0.,0.,1.)); +#356865 = ORIENTED_EDGE('',*,*,#356866,.F.); +#356866 = EDGE_CURVE('',#356828,#356859,#356867,.T.); +#356867 = LINE('',#356868,#356869); +#356868 = CARTESIAN_POINT('',(130.,-71.82,1.51)); +#356869 = VECTOR('',#356870,1.); +#356870 = DIRECTION('',(0.,-1.,0.)); +#356871 = PLANE('',#356872); +#356872 = AXIS2_PLACEMENT_3D('',#356873,#356874,#356875); +#356873 = CARTESIAN_POINT('',(130.,-71.82,1.51)); +#356874 = DIRECTION('',(1.,0.,-0.)); +#356875 = DIRECTION('',(0.,-1.,0.)); +#356876 = ADVANCED_FACE('',(#356877),#356893,.T.); +#356877 = FACE_BOUND('',#356878,.T.); +#356878 = EDGE_LOOP('',(#356879,#356880,#356886,#356887)); +#356879 = ORIENTED_EDGE('',*,*,#356858,.T.); +#356880 = ORIENTED_EDGE('',*,*,#356881,.T.); +#356881 = EDGE_CURVE('',#356851,#356781,#356882,.T.); +#356882 = LINE('',#356883,#356884); +#356883 = CARTESIAN_POINT('',(130.,-72.72,1.55)); +#356884 = VECTOR('',#356885,1.); +#356885 = DIRECTION('',(-1.,0.,0.)); +#356886 = ORIENTED_EDGE('',*,*,#356778,.F.); +#356887 = ORIENTED_EDGE('',*,*,#356888,.F.); +#356888 = EDGE_CURVE('',#356859,#356779,#356889,.T.); +#356889 = LINE('',#356890,#356891); +#356890 = CARTESIAN_POINT('',(130.,-72.72,1.51)); +#356891 = VECTOR('',#356892,1.); +#356892 = DIRECTION('',(-1.,0.,0.)); +#356893 = PLANE('',#356894); +#356894 = AXIS2_PLACEMENT_3D('',#356895,#356896,#356897); +#356895 = CARTESIAN_POINT('',(130.,-72.72,1.51)); +#356896 = DIRECTION('',(0.,-1.,0.)); +#356897 = DIRECTION('',(-1.,0.,0.)); +#356898 = ADVANCED_FACE('',(#356899),#356905,.F.); +#356899 = FACE_BOUND('',#356900,.T.); +#356900 = EDGE_LOOP('',(#356901,#356902,#356903,#356904)); +#356901 = ORIENTED_EDGE('',*,*,#356804,.T.); +#356902 = ORIENTED_EDGE('',*,*,#356835,.T.); +#356903 = ORIENTED_EDGE('',*,*,#356866,.T.); +#356904 = ORIENTED_EDGE('',*,*,#356888,.T.); +#356905 = PLANE('',#356906); +#356906 = AXIS2_PLACEMENT_3D('',#356907,#356908,#356909); +#356907 = CARTESIAN_POINT('',(0.,0.,1.51)); +#356908 = DIRECTION('',(0.,0.,1.)); +#356909 = DIRECTION('',(1.,0.,-0.)); +#356910 = ADVANCED_FACE('',(#356911),#356917,.T.); +#356911 = FACE_BOUND('',#356912,.F.); +#356912 = EDGE_LOOP('',(#356913,#356914,#356915,#356916)); +#356913 = ORIENTED_EDGE('',*,*,#356788,.T.); +#356914 = ORIENTED_EDGE('',*,*,#356819,.T.); +#356915 = ORIENTED_EDGE('',*,*,#356850,.T.); +#356916 = ORIENTED_EDGE('',*,*,#356881,.T.); +#356917 = PLANE('',#356918); +#356918 = AXIS2_PLACEMENT_3D('',#356919,#356920,#356921); +#356919 = CARTESIAN_POINT('',(0.,0.,1.55)); +#356920 = DIRECTION('',(0.,0.,1.)); +#356921 = DIRECTION('',(1.,0.,-0.)); +#356922 = MANIFOLD_SOLID_BREP('',#356923); +#356923 = CLOSED_SHELL('',(#356924,#356966,#356997,#357030,#357061, + #357094,#357125,#357158,#357180,#357196)); +#356924 = ADVANCED_FACE('',(#356925),#356961,.T.); +#356925 = FACE_BOUND('',#356926,.T.); +#356926 = EDGE_LOOP('',(#356927,#356937,#356946,#356954)); +#356927 = ORIENTED_EDGE('',*,*,#356928,.T.); +#356928 = EDGE_CURVE('',#356929,#356931,#356933,.T.); +#356929 = VERTEX_POINT('',#356930); +#356930 = CARTESIAN_POINT('',(126.23,-88.915,1.51)); +#356931 = VERTEX_POINT('',#356932); +#356932 = CARTESIAN_POINT('',(126.23,-88.915,1.55)); +#356933 = LINE('',#356934,#356935); +#356934 = CARTESIAN_POINT('',(126.23,-88.915,1.51)); +#356935 = VECTOR('',#356936,1.); +#356936 = DIRECTION('',(0.,0.,1.)); +#356937 = ORIENTED_EDGE('',*,*,#356938,.T.); +#356938 = EDGE_CURVE('',#356931,#356939,#356941,.T.); +#356939 = VERTEX_POINT('',#356940); +#356940 = CARTESIAN_POINT('',(126.365,-88.78,1.55)); +#356941 = CIRCLE('',#356942,0.135001418495); +#356942 = AXIS2_PLACEMENT_3D('',#356943,#356944,#356945); +#356943 = CARTESIAN_POINT('',(126.36500141848,-88.91500141848,1.55)); +#356944 = DIRECTION('',(0.,0.,-1.)); +#356945 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356946 = ORIENTED_EDGE('',*,*,#356947,.F.); +#356947 = EDGE_CURVE('',#356948,#356939,#356950,.T.); +#356948 = VERTEX_POINT('',#356949); +#356949 = CARTESIAN_POINT('',(126.365,-88.78,1.51)); +#356950 = LINE('',#356951,#356952); +#356951 = CARTESIAN_POINT('',(126.365,-88.78,1.51)); +#356952 = VECTOR('',#356953,1.); +#356953 = DIRECTION('',(0.,0.,1.)); +#356954 = ORIENTED_EDGE('',*,*,#356955,.F.); +#356955 = EDGE_CURVE('',#356929,#356948,#356956,.T.); +#356956 = CIRCLE('',#356957,0.135001418495); +#356957 = AXIS2_PLACEMENT_3D('',#356958,#356959,#356960); +#356958 = CARTESIAN_POINT('',(126.36500141848,-88.91500141848,1.51)); +#356959 = DIRECTION('',(0.,0.,-1.)); +#356960 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356961 = CYLINDRICAL_SURFACE('',#356962,0.135001418495); +#356962 = AXIS2_PLACEMENT_3D('',#356963,#356964,#356965); +#356963 = CARTESIAN_POINT('',(126.36500141848,-88.91500141848,1.51)); +#356964 = DIRECTION('',(0.,0.,-1.)); +#356965 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#356966 = ADVANCED_FACE('',(#356967),#356992,.T.); +#356967 = FACE_BOUND('',#356968,.T.); +#356968 = EDGE_LOOP('',(#356969,#356970,#356978,#356986)); +#356969 = ORIENTED_EDGE('',*,*,#356947,.T.); +#356970 = ORIENTED_EDGE('',*,*,#356971,.T.); +#356971 = EDGE_CURVE('',#356939,#356972,#356974,.T.); +#356972 = VERTEX_POINT('',#356973); +#356973 = CARTESIAN_POINT('',(126.635,-88.78,1.55)); +#356974 = LINE('',#356975,#356976); +#356975 = CARTESIAN_POINT('',(126.365,-88.78,1.55)); +#356976 = VECTOR('',#356977,1.); +#356977 = DIRECTION('',(1.,0.,0.)); +#356978 = ORIENTED_EDGE('',*,*,#356979,.F.); +#356979 = EDGE_CURVE('',#356980,#356972,#356982,.T.); +#356980 = VERTEX_POINT('',#356981); +#356981 = CARTESIAN_POINT('',(126.635,-88.78,1.51)); +#356982 = LINE('',#356983,#356984); +#356983 = CARTESIAN_POINT('',(126.635,-88.78,1.51)); +#356984 = VECTOR('',#356985,1.); +#356985 = DIRECTION('',(0.,0.,1.)); +#356986 = ORIENTED_EDGE('',*,*,#356987,.F.); +#356987 = EDGE_CURVE('',#356948,#356980,#356988,.T.); +#356988 = LINE('',#356989,#356990); +#356989 = CARTESIAN_POINT('',(126.365,-88.78,1.51)); +#356990 = VECTOR('',#356991,1.); +#356991 = DIRECTION('',(1.,0.,0.)); +#356992 = PLANE('',#356993); +#356993 = AXIS2_PLACEMENT_3D('',#356994,#356995,#356996); +#356994 = CARTESIAN_POINT('',(126.365,-88.78,1.51)); +#356995 = DIRECTION('',(0.,1.,0.)); +#356996 = DIRECTION('',(1.,0.,0.)); +#356997 = ADVANCED_FACE('',(#356998),#357025,.T.); +#356998 = FACE_BOUND('',#356999,.T.); +#356999 = EDGE_LOOP('',(#357000,#357001,#357010,#357018)); +#357000 = ORIENTED_EDGE('',*,*,#356979,.T.); +#357001 = ORIENTED_EDGE('',*,*,#357002,.T.); +#357002 = EDGE_CURVE('',#356972,#357003,#357005,.T.); +#357003 = VERTEX_POINT('',#357004); +#357004 = CARTESIAN_POINT('',(126.77,-88.915,1.55)); +#357005 = CIRCLE('',#357006,0.135001418495); +#357006 = AXIS2_PLACEMENT_3D('',#357007,#357008,#357009); +#357007 = CARTESIAN_POINT('',(126.63499858151,-88.91500141848,1.55)); +#357008 = DIRECTION('',(0.,0.,-1.)); +#357009 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357010 = ORIENTED_EDGE('',*,*,#357011,.F.); +#357011 = EDGE_CURVE('',#357012,#357003,#357014,.T.); +#357012 = VERTEX_POINT('',#357013); +#357013 = CARTESIAN_POINT('',(126.77,-88.915,1.51)); +#357014 = LINE('',#357015,#357016); +#357015 = CARTESIAN_POINT('',(126.77,-88.915,1.51)); +#357016 = VECTOR('',#357017,1.); +#357017 = DIRECTION('',(0.,0.,1.)); +#357018 = ORIENTED_EDGE('',*,*,#357019,.F.); +#357019 = EDGE_CURVE('',#356980,#357012,#357020,.T.); +#357020 = CIRCLE('',#357021,0.135001418495); +#357021 = AXIS2_PLACEMENT_3D('',#357022,#357023,#357024); +#357022 = CARTESIAN_POINT('',(126.63499858151,-88.91500141848,1.51)); +#357023 = DIRECTION('',(0.,0.,-1.)); +#357024 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357025 = CYLINDRICAL_SURFACE('',#357026,0.135001418495); +#357026 = AXIS2_PLACEMENT_3D('',#357027,#357028,#357029); +#357027 = CARTESIAN_POINT('',(126.63499858151,-88.91500141848,1.51)); +#357028 = DIRECTION('',(0.,0.,-1.)); +#357029 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357030 = ADVANCED_FACE('',(#357031),#357056,.T.); +#357031 = FACE_BOUND('',#357032,.T.); +#357032 = EDGE_LOOP('',(#357033,#357034,#357042,#357050)); +#357033 = ORIENTED_EDGE('',*,*,#357011,.T.); +#357034 = ORIENTED_EDGE('',*,*,#357035,.T.); +#357035 = EDGE_CURVE('',#357003,#357036,#357038,.T.); +#357036 = VERTEX_POINT('',#357037); +#357037 = CARTESIAN_POINT('',(126.77,-89.285,1.55)); +#357038 = LINE('',#357039,#357040); +#357039 = CARTESIAN_POINT('',(126.77,-88.915,1.55)); +#357040 = VECTOR('',#357041,1.); +#357041 = DIRECTION('',(0.,-1.,0.)); +#357042 = ORIENTED_EDGE('',*,*,#357043,.F.); +#357043 = EDGE_CURVE('',#357044,#357036,#357046,.T.); +#357044 = VERTEX_POINT('',#357045); +#357045 = CARTESIAN_POINT('',(126.77,-89.285,1.51)); +#357046 = LINE('',#357047,#357048); +#357047 = CARTESIAN_POINT('',(126.77,-89.285,1.51)); +#357048 = VECTOR('',#357049,1.); +#357049 = DIRECTION('',(0.,0.,1.)); +#357050 = ORIENTED_EDGE('',*,*,#357051,.F.); +#357051 = EDGE_CURVE('',#357012,#357044,#357052,.T.); +#357052 = LINE('',#357053,#357054); +#357053 = CARTESIAN_POINT('',(126.77,-88.915,1.51)); +#357054 = VECTOR('',#357055,1.); +#357055 = DIRECTION('',(0.,-1.,0.)); +#357056 = PLANE('',#357057); +#357057 = AXIS2_PLACEMENT_3D('',#357058,#357059,#357060); +#357058 = CARTESIAN_POINT('',(126.77,-88.915,1.51)); +#357059 = DIRECTION('',(1.,0.,-0.)); +#357060 = DIRECTION('',(0.,-1.,0.)); +#357061 = ADVANCED_FACE('',(#357062),#357089,.T.); +#357062 = FACE_BOUND('',#357063,.T.); +#357063 = EDGE_LOOP('',(#357064,#357065,#357074,#357082)); +#357064 = ORIENTED_EDGE('',*,*,#357043,.T.); +#357065 = ORIENTED_EDGE('',*,*,#357066,.T.); +#357066 = EDGE_CURVE('',#357036,#357067,#357069,.T.); +#357067 = VERTEX_POINT('',#357068); +#357068 = CARTESIAN_POINT('',(126.635,-89.42,1.55)); +#357069 = CIRCLE('',#357070,0.135001418495); +#357070 = AXIS2_PLACEMENT_3D('',#357071,#357072,#357073); +#357071 = CARTESIAN_POINT('',(126.63499858151,-89.28499858151,1.55)); +#357072 = DIRECTION('',(0.,0.,-1.)); +#357073 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357074 = ORIENTED_EDGE('',*,*,#357075,.F.); +#357075 = EDGE_CURVE('',#357076,#357067,#357078,.T.); +#357076 = VERTEX_POINT('',#357077); +#357077 = CARTESIAN_POINT('',(126.635,-89.42,1.51)); +#357078 = LINE('',#357079,#357080); +#357079 = CARTESIAN_POINT('',(126.635,-89.42,1.51)); +#357080 = VECTOR('',#357081,1.); +#357081 = DIRECTION('',(0.,0.,1.)); +#357082 = ORIENTED_EDGE('',*,*,#357083,.F.); +#357083 = EDGE_CURVE('',#357044,#357076,#357084,.T.); +#357084 = CIRCLE('',#357085,0.135001418495); +#357085 = AXIS2_PLACEMENT_3D('',#357086,#357087,#357088); +#357086 = CARTESIAN_POINT('',(126.63499858151,-89.28499858151,1.51)); +#357087 = DIRECTION('',(0.,0.,-1.)); +#357088 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357089 = CYLINDRICAL_SURFACE('',#357090,0.135001418495); +#357090 = AXIS2_PLACEMENT_3D('',#357091,#357092,#357093); +#357091 = CARTESIAN_POINT('',(126.63499858151,-89.28499858151,1.51)); +#357092 = DIRECTION('',(0.,0.,-1.)); +#357093 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357094 = ADVANCED_FACE('',(#357095),#357120,.T.); +#357095 = FACE_BOUND('',#357096,.T.); +#357096 = EDGE_LOOP('',(#357097,#357098,#357106,#357114)); +#357097 = ORIENTED_EDGE('',*,*,#357075,.T.); +#357098 = ORIENTED_EDGE('',*,*,#357099,.T.); +#357099 = EDGE_CURVE('',#357067,#357100,#357102,.T.); +#357100 = VERTEX_POINT('',#357101); +#357101 = CARTESIAN_POINT('',(126.365,-89.42,1.55)); +#357102 = LINE('',#357103,#357104); +#357103 = CARTESIAN_POINT('',(126.635,-89.42,1.55)); +#357104 = VECTOR('',#357105,1.); +#357105 = DIRECTION('',(-1.,0.,0.)); +#357106 = ORIENTED_EDGE('',*,*,#357107,.F.); +#357107 = EDGE_CURVE('',#357108,#357100,#357110,.T.); +#357108 = VERTEX_POINT('',#357109); +#357109 = CARTESIAN_POINT('',(126.365,-89.42,1.51)); +#357110 = LINE('',#357111,#357112); +#357111 = CARTESIAN_POINT('',(126.365,-89.42,1.51)); +#357112 = VECTOR('',#357113,1.); +#357113 = DIRECTION('',(0.,0.,1.)); +#357114 = ORIENTED_EDGE('',*,*,#357115,.F.); +#357115 = EDGE_CURVE('',#357076,#357108,#357116,.T.); +#357116 = LINE('',#357117,#357118); +#357117 = CARTESIAN_POINT('',(126.635,-89.42,1.51)); +#357118 = VECTOR('',#357119,1.); +#357119 = DIRECTION('',(-1.,0.,0.)); +#357120 = PLANE('',#357121); +#357121 = AXIS2_PLACEMENT_3D('',#357122,#357123,#357124); +#357122 = CARTESIAN_POINT('',(126.635,-89.42,1.51)); +#357123 = DIRECTION('',(0.,-1.,0.)); +#357124 = DIRECTION('',(-1.,0.,0.)); +#357125 = ADVANCED_FACE('',(#357126),#357153,.T.); +#357126 = FACE_BOUND('',#357127,.T.); +#357127 = EDGE_LOOP('',(#357128,#357129,#357138,#357146)); +#357128 = ORIENTED_EDGE('',*,*,#357107,.T.); +#357129 = ORIENTED_EDGE('',*,*,#357130,.T.); +#357130 = EDGE_CURVE('',#357100,#357131,#357133,.T.); +#357131 = VERTEX_POINT('',#357132); +#357132 = CARTESIAN_POINT('',(126.23,-89.285,1.55)); +#357133 = CIRCLE('',#357134,0.135001418495); +#357134 = AXIS2_PLACEMENT_3D('',#357135,#357136,#357137); +#357135 = CARTESIAN_POINT('',(126.36500141848,-89.28499858151,1.55)); +#357136 = DIRECTION('',(0.,0.,-1.)); +#357137 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357138 = ORIENTED_EDGE('',*,*,#357139,.F.); +#357139 = EDGE_CURVE('',#357140,#357131,#357142,.T.); +#357140 = VERTEX_POINT('',#357141); +#357141 = CARTESIAN_POINT('',(126.23,-89.285,1.51)); +#357142 = LINE('',#357143,#357144); +#357143 = CARTESIAN_POINT('',(126.23,-89.285,1.51)); +#357144 = VECTOR('',#357145,1.); +#357145 = DIRECTION('',(0.,0.,1.)); +#357146 = ORIENTED_EDGE('',*,*,#357147,.F.); +#357147 = EDGE_CURVE('',#357108,#357140,#357148,.T.); +#357148 = CIRCLE('',#357149,0.135001418495); +#357149 = AXIS2_PLACEMENT_3D('',#357150,#357151,#357152); +#357150 = CARTESIAN_POINT('',(126.36500141848,-89.28499858151,1.51)); +#357151 = DIRECTION('',(0.,0.,-1.)); +#357152 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357153 = CYLINDRICAL_SURFACE('',#357154,0.135001418495); +#357154 = AXIS2_PLACEMENT_3D('',#357155,#357156,#357157); +#357155 = CARTESIAN_POINT('',(126.36500141848,-89.28499858151,1.51)); +#357156 = DIRECTION('',(0.,0.,-1.)); +#357157 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357158 = ADVANCED_FACE('',(#357159),#357175,.T.); +#357159 = FACE_BOUND('',#357160,.T.); +#357160 = EDGE_LOOP('',(#357161,#357162,#357168,#357169)); +#357161 = ORIENTED_EDGE('',*,*,#357139,.T.); +#357162 = ORIENTED_EDGE('',*,*,#357163,.T.); +#357163 = EDGE_CURVE('',#357131,#356931,#357164,.T.); +#357164 = LINE('',#357165,#357166); +#357165 = CARTESIAN_POINT('',(126.23,-89.285,1.55)); +#357166 = VECTOR('',#357167,1.); +#357167 = DIRECTION('',(0.,1.,0.)); +#357168 = ORIENTED_EDGE('',*,*,#356928,.F.); +#357169 = ORIENTED_EDGE('',*,*,#357170,.F.); +#357170 = EDGE_CURVE('',#357140,#356929,#357171,.T.); +#357171 = LINE('',#357172,#357173); +#357172 = CARTESIAN_POINT('',(126.23,-89.285,1.51)); +#357173 = VECTOR('',#357174,1.); +#357174 = DIRECTION('',(0.,1.,0.)); +#357175 = PLANE('',#357176); +#357176 = AXIS2_PLACEMENT_3D('',#357177,#357178,#357179); +#357177 = CARTESIAN_POINT('',(126.23,-89.285,1.51)); +#357178 = DIRECTION('',(-1.,0.,0.)); +#357179 = DIRECTION('',(0.,1.,0.)); +#357180 = ADVANCED_FACE('',(#357181),#357191,.F.); +#357181 = FACE_BOUND('',#357182,.T.); +#357182 = EDGE_LOOP('',(#357183,#357184,#357185,#357186,#357187,#357188, + #357189,#357190)); +#357183 = ORIENTED_EDGE('',*,*,#356955,.T.); +#357184 = ORIENTED_EDGE('',*,*,#356987,.T.); +#357185 = ORIENTED_EDGE('',*,*,#357019,.T.); +#357186 = ORIENTED_EDGE('',*,*,#357051,.T.); +#357187 = ORIENTED_EDGE('',*,*,#357083,.T.); +#357188 = ORIENTED_EDGE('',*,*,#357115,.T.); +#357189 = ORIENTED_EDGE('',*,*,#357147,.T.); +#357190 = ORIENTED_EDGE('',*,*,#357170,.T.); +#357191 = PLANE('',#357192); +#357192 = AXIS2_PLACEMENT_3D('',#357193,#357194,#357195); +#357193 = CARTESIAN_POINT('',(0.,0.,1.51)); +#357194 = DIRECTION('',(0.,0.,1.)); +#357195 = DIRECTION('',(1.,0.,-0.)); +#357196 = ADVANCED_FACE('',(#357197),#357207,.T.); +#357197 = FACE_BOUND('',#357198,.F.); +#357198 = EDGE_LOOP('',(#357199,#357200,#357201,#357202,#357203,#357204, + #357205,#357206)); +#357199 = ORIENTED_EDGE('',*,*,#356938,.T.); +#357200 = ORIENTED_EDGE('',*,*,#356971,.T.); +#357201 = ORIENTED_EDGE('',*,*,#357002,.T.); +#357202 = ORIENTED_EDGE('',*,*,#357035,.T.); +#357203 = ORIENTED_EDGE('',*,*,#357066,.T.); +#357204 = ORIENTED_EDGE('',*,*,#357099,.T.); +#357205 = ORIENTED_EDGE('',*,*,#357130,.T.); +#357206 = ORIENTED_EDGE('',*,*,#357163,.T.); +#357207 = PLANE('',#357208); +#357208 = AXIS2_PLACEMENT_3D('',#357209,#357210,#357211); +#357209 = CARTESIAN_POINT('',(0.,0.,1.55)); +#357210 = DIRECTION('',(0.,0.,1.)); +#357211 = DIRECTION('',(1.,0.,-0.)); +#357212 = MANIFOLD_SOLID_BREP('',#357213); +#357213 = CLOSED_SHELL('',(#357214,#357256,#357287,#357320,#357351, + #357384,#357415,#357448,#357470,#357486)); +#357214 = ADVANCED_FACE('',(#357215),#357251,.T.); +#357215 = FACE_BOUND('',#357216,.T.); +#357216 = EDGE_LOOP('',(#357217,#357227,#357236,#357244)); +#357217 = ORIENTED_EDGE('',*,*,#357218,.T.); +#357218 = EDGE_CURVE('',#357219,#357221,#357223,.T.); +#357219 = VERTEX_POINT('',#357220); +#357220 = CARTESIAN_POINT('',(126.23,-87.715,1.51)); +#357221 = VERTEX_POINT('',#357222); +#357222 = CARTESIAN_POINT('',(126.23,-87.715,1.55)); +#357223 = LINE('',#357224,#357225); +#357224 = CARTESIAN_POINT('',(126.23,-87.715,1.51)); +#357225 = VECTOR('',#357226,1.); +#357226 = DIRECTION('',(0.,0.,1.)); +#357227 = ORIENTED_EDGE('',*,*,#357228,.T.); +#357228 = EDGE_CURVE('',#357221,#357229,#357231,.T.); +#357229 = VERTEX_POINT('',#357230); +#357230 = CARTESIAN_POINT('',(126.365,-87.58,1.55)); +#357231 = CIRCLE('',#357232,0.135001418495); +#357232 = AXIS2_PLACEMENT_3D('',#357233,#357234,#357235); +#357233 = CARTESIAN_POINT('',(126.36500141848,-87.71500141848,1.55)); +#357234 = DIRECTION('',(0.,0.,-1.)); +#357235 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#357236 = ORIENTED_EDGE('',*,*,#357237,.F.); +#357237 = EDGE_CURVE('',#357238,#357229,#357240,.T.); +#357238 = VERTEX_POINT('',#357239); +#357239 = CARTESIAN_POINT('',(126.365,-87.58,1.51)); +#357240 = LINE('',#357241,#357242); +#357241 = CARTESIAN_POINT('',(126.365,-87.58,1.51)); +#357242 = VECTOR('',#357243,1.); +#357243 = DIRECTION('',(0.,0.,1.)); +#357244 = ORIENTED_EDGE('',*,*,#357245,.F.); +#357245 = EDGE_CURVE('',#357219,#357238,#357246,.T.); +#357246 = CIRCLE('',#357247,0.135001418495); +#357247 = AXIS2_PLACEMENT_3D('',#357248,#357249,#357250); +#357248 = CARTESIAN_POINT('',(126.36500141848,-87.71500141848,1.51)); +#357249 = DIRECTION('',(0.,0.,-1.)); +#357250 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#357251 = CYLINDRICAL_SURFACE('',#357252,0.135001418495); +#357252 = AXIS2_PLACEMENT_3D('',#357253,#357254,#357255); +#357253 = CARTESIAN_POINT('',(126.36500141848,-87.71500141848,1.51)); +#357254 = DIRECTION('',(0.,0.,-1.)); +#357255 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#357256 = ADVANCED_FACE('',(#357257),#357282,.T.); +#357257 = FACE_BOUND('',#357258,.T.); +#357258 = EDGE_LOOP('',(#357259,#357260,#357268,#357276)); +#357259 = ORIENTED_EDGE('',*,*,#357237,.T.); +#357260 = ORIENTED_EDGE('',*,*,#357261,.T.); +#357261 = EDGE_CURVE('',#357229,#357262,#357264,.T.); +#357262 = VERTEX_POINT('',#357263); +#357263 = CARTESIAN_POINT('',(126.635,-87.58,1.55)); +#357264 = LINE('',#357265,#357266); +#357265 = CARTESIAN_POINT('',(126.365,-87.58,1.55)); +#357266 = VECTOR('',#357267,1.); +#357267 = DIRECTION('',(1.,0.,0.)); +#357268 = ORIENTED_EDGE('',*,*,#357269,.F.); +#357269 = EDGE_CURVE('',#357270,#357262,#357272,.T.); +#357270 = VERTEX_POINT('',#357271); +#357271 = CARTESIAN_POINT('',(126.635,-87.58,1.51)); +#357272 = LINE('',#357273,#357274); +#357273 = CARTESIAN_POINT('',(126.635,-87.58,1.51)); +#357274 = VECTOR('',#357275,1.); +#357275 = DIRECTION('',(0.,0.,1.)); +#357276 = ORIENTED_EDGE('',*,*,#357277,.F.); +#357277 = EDGE_CURVE('',#357238,#357270,#357278,.T.); +#357278 = LINE('',#357279,#357280); +#357279 = CARTESIAN_POINT('',(126.365,-87.58,1.51)); +#357280 = VECTOR('',#357281,1.); +#357281 = DIRECTION('',(1.,0.,0.)); +#357282 = PLANE('',#357283); +#357283 = AXIS2_PLACEMENT_3D('',#357284,#357285,#357286); +#357284 = CARTESIAN_POINT('',(126.365,-87.58,1.51)); +#357285 = DIRECTION('',(0.,1.,0.)); +#357286 = DIRECTION('',(1.,0.,0.)); +#357287 = ADVANCED_FACE('',(#357288),#357315,.T.); +#357288 = FACE_BOUND('',#357289,.T.); +#357289 = EDGE_LOOP('',(#357290,#357291,#357300,#357308)); +#357290 = ORIENTED_EDGE('',*,*,#357269,.T.); +#357291 = ORIENTED_EDGE('',*,*,#357292,.T.); +#357292 = EDGE_CURVE('',#357262,#357293,#357295,.T.); +#357293 = VERTEX_POINT('',#357294); +#357294 = CARTESIAN_POINT('',(126.77,-87.715,1.55)); +#357295 = CIRCLE('',#357296,0.135001418495); +#357296 = AXIS2_PLACEMENT_3D('',#357297,#357298,#357299); +#357297 = CARTESIAN_POINT('',(126.63499858151,-87.71500141848,1.55)); +#357298 = DIRECTION('',(0.,0.,-1.)); +#357299 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357300 = ORIENTED_EDGE('',*,*,#357301,.F.); +#357301 = EDGE_CURVE('',#357302,#357293,#357304,.T.); +#357302 = VERTEX_POINT('',#357303); +#357303 = CARTESIAN_POINT('',(126.77,-87.715,1.51)); +#357304 = LINE('',#357305,#357306); +#357305 = CARTESIAN_POINT('',(126.77,-87.715,1.51)); +#357306 = VECTOR('',#357307,1.); +#357307 = DIRECTION('',(0.,0.,1.)); +#357308 = ORIENTED_EDGE('',*,*,#357309,.F.); +#357309 = EDGE_CURVE('',#357270,#357302,#357310,.T.); +#357310 = CIRCLE('',#357311,0.135001418495); +#357311 = AXIS2_PLACEMENT_3D('',#357312,#357313,#357314); +#357312 = CARTESIAN_POINT('',(126.63499858151,-87.71500141848,1.51)); +#357313 = DIRECTION('',(0.,0.,-1.)); +#357314 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357315 = CYLINDRICAL_SURFACE('',#357316,0.135001418495); +#357316 = AXIS2_PLACEMENT_3D('',#357317,#357318,#357319); +#357317 = CARTESIAN_POINT('',(126.63499858151,-87.71500141848,1.51)); +#357318 = DIRECTION('',(0.,0.,-1.)); +#357319 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#357320 = ADVANCED_FACE('',(#357321),#357346,.T.); +#357321 = FACE_BOUND('',#357322,.T.); +#357322 = EDGE_LOOP('',(#357323,#357324,#357332,#357340)); +#357323 = ORIENTED_EDGE('',*,*,#357301,.T.); +#357324 = ORIENTED_EDGE('',*,*,#357325,.T.); +#357325 = EDGE_CURVE('',#357293,#357326,#357328,.T.); +#357326 = VERTEX_POINT('',#357327); +#357327 = CARTESIAN_POINT('',(126.77,-88.085,1.55)); +#357328 = LINE('',#357329,#357330); +#357329 = CARTESIAN_POINT('',(126.77,-87.715,1.55)); +#357330 = VECTOR('',#357331,1.); +#357331 = DIRECTION('',(0.,-1.,0.)); +#357332 = ORIENTED_EDGE('',*,*,#357333,.F.); +#357333 = EDGE_CURVE('',#357334,#357326,#357336,.T.); +#357334 = VERTEX_POINT('',#357335); +#357335 = CARTESIAN_POINT('',(126.77,-88.085,1.51)); +#357336 = LINE('',#357337,#357338); +#357337 = CARTESIAN_POINT('',(126.77,-88.085,1.51)); +#357338 = VECTOR('',#357339,1.); +#357339 = DIRECTION('',(0.,0.,1.)); +#357340 = ORIENTED_EDGE('',*,*,#357341,.F.); +#357341 = EDGE_CURVE('',#357302,#357334,#357342,.T.); +#357342 = LINE('',#357343,#357344); +#357343 = CARTESIAN_POINT('',(126.77,-87.715,1.51)); +#357344 = VECTOR('',#357345,1.); +#357345 = DIRECTION('',(0.,-1.,0.)); +#357346 = PLANE('',#357347); +#357347 = AXIS2_PLACEMENT_3D('',#357348,#357349,#357350); +#357348 = CARTESIAN_POINT('',(126.77,-87.715,1.51)); +#357349 = DIRECTION('',(1.,0.,-0.)); +#357350 = DIRECTION('',(0.,-1.,0.)); +#357351 = ADVANCED_FACE('',(#357352),#357379,.T.); +#357352 = FACE_BOUND('',#357353,.T.); +#357353 = EDGE_LOOP('',(#357354,#357355,#357364,#357372)); +#357354 = ORIENTED_EDGE('',*,*,#357333,.T.); +#357355 = ORIENTED_EDGE('',*,*,#357356,.T.); +#357356 = EDGE_CURVE('',#357326,#357357,#357359,.T.); +#357357 = VERTEX_POINT('',#357358); +#357358 = CARTESIAN_POINT('',(126.635,-88.22,1.55)); +#357359 = CIRCLE('',#357360,0.135001418495); +#357360 = AXIS2_PLACEMENT_3D('',#357361,#357362,#357363); +#357361 = CARTESIAN_POINT('',(126.63499858151,-88.08499858151,1.55)); +#357362 = DIRECTION('',(0.,0.,-1.)); +#357363 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357364 = ORIENTED_EDGE('',*,*,#357365,.F.); +#357365 = EDGE_CURVE('',#357366,#357357,#357368,.T.); +#357366 = VERTEX_POINT('',#357367); +#357367 = CARTESIAN_POINT('',(126.635,-88.22,1.51)); +#357368 = LINE('',#357369,#357370); +#357369 = CARTESIAN_POINT('',(126.635,-88.22,1.51)); +#357370 = VECTOR('',#357371,1.); +#357371 = DIRECTION('',(0.,0.,1.)); +#357372 = ORIENTED_EDGE('',*,*,#357373,.F.); +#357373 = EDGE_CURVE('',#357334,#357366,#357374,.T.); +#357374 = CIRCLE('',#357375,0.135001418495); +#357375 = AXIS2_PLACEMENT_3D('',#357376,#357377,#357378); +#357376 = CARTESIAN_POINT('',(126.63499858151,-88.08499858151,1.51)); +#357377 = DIRECTION('',(0.,0.,-1.)); +#357378 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357379 = CYLINDRICAL_SURFACE('',#357380,0.135001418495); +#357380 = AXIS2_PLACEMENT_3D('',#357381,#357382,#357383); +#357381 = CARTESIAN_POINT('',(126.63499858151,-88.08499858151,1.51)); +#357382 = DIRECTION('',(0.,0.,-1.)); +#357383 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#357384 = ADVANCED_FACE('',(#357385),#357410,.T.); +#357385 = FACE_BOUND('',#357386,.T.); +#357386 = EDGE_LOOP('',(#357387,#357388,#357396,#357404)); +#357387 = ORIENTED_EDGE('',*,*,#357365,.T.); +#357388 = ORIENTED_EDGE('',*,*,#357389,.T.); +#357389 = EDGE_CURVE('',#357357,#357390,#357392,.T.); +#357390 = VERTEX_POINT('',#357391); +#357391 = CARTESIAN_POINT('',(126.365,-88.22,1.55)); +#357392 = LINE('',#357393,#357394); +#357393 = CARTESIAN_POINT('',(126.635,-88.22,1.55)); +#357394 = VECTOR('',#357395,1.); +#357395 = DIRECTION('',(-1.,0.,0.)); +#357396 = ORIENTED_EDGE('',*,*,#357397,.F.); +#357397 = EDGE_CURVE('',#357398,#357390,#357400,.T.); +#357398 = VERTEX_POINT('',#357399); +#357399 = CARTESIAN_POINT('',(126.365,-88.22,1.51)); +#357400 = LINE('',#357401,#357402); +#357401 = CARTESIAN_POINT('',(126.365,-88.22,1.51)); +#357402 = VECTOR('',#357403,1.); +#357403 = DIRECTION('',(0.,0.,1.)); +#357404 = ORIENTED_EDGE('',*,*,#357405,.F.); +#357405 = EDGE_CURVE('',#357366,#357398,#357406,.T.); +#357406 = LINE('',#357407,#357408); +#357407 = CARTESIAN_POINT('',(126.635,-88.22,1.51)); +#357408 = VECTOR('',#357409,1.); +#357409 = DIRECTION('',(-1.,0.,0.)); +#357410 = PLANE('',#357411); +#357411 = AXIS2_PLACEMENT_3D('',#357412,#357413,#357414); +#357412 = CARTESIAN_POINT('',(126.635,-88.22,1.51)); +#357413 = DIRECTION('',(0.,-1.,0.)); +#357414 = DIRECTION('',(-1.,0.,0.)); +#357415 = ADVANCED_FACE('',(#357416),#357443,.T.); +#357416 = FACE_BOUND('',#357417,.T.); +#357417 = EDGE_LOOP('',(#357418,#357419,#357428,#357436)); +#357418 = ORIENTED_EDGE('',*,*,#357397,.T.); +#357419 = ORIENTED_EDGE('',*,*,#357420,.T.); +#357420 = EDGE_CURVE('',#357390,#357421,#357423,.T.); +#357421 = VERTEX_POINT('',#357422); +#357422 = CARTESIAN_POINT('',(126.23,-88.085,1.55)); +#357423 = CIRCLE('',#357424,0.135001418495); +#357424 = AXIS2_PLACEMENT_3D('',#357425,#357426,#357427); +#357425 = CARTESIAN_POINT('',(126.36500141848,-88.08499858151,1.55)); +#357426 = DIRECTION('',(0.,0.,-1.)); +#357427 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357428 = ORIENTED_EDGE('',*,*,#357429,.F.); +#357429 = EDGE_CURVE('',#357430,#357421,#357432,.T.); +#357430 = VERTEX_POINT('',#357431); +#357431 = CARTESIAN_POINT('',(126.23,-88.085,1.51)); +#357432 = LINE('',#357433,#357434); +#357433 = CARTESIAN_POINT('',(126.23,-88.085,1.51)); +#357434 = VECTOR('',#357435,1.); +#357435 = DIRECTION('',(0.,0.,1.)); +#357436 = ORIENTED_EDGE('',*,*,#357437,.F.); +#357437 = EDGE_CURVE('',#357398,#357430,#357438,.T.); +#357438 = CIRCLE('',#357439,0.135001418495); +#357439 = AXIS2_PLACEMENT_3D('',#357440,#357441,#357442); +#357440 = CARTESIAN_POINT('',(126.36500141848,-88.08499858151,1.51)); +#357441 = DIRECTION('',(0.,0.,-1.)); +#357442 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357443 = CYLINDRICAL_SURFACE('',#357444,0.135001418495); +#357444 = AXIS2_PLACEMENT_3D('',#357445,#357446,#357447); +#357445 = CARTESIAN_POINT('',(126.36500141848,-88.08499858151,1.51)); +#357446 = DIRECTION('',(0.,0.,-1.)); +#357447 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#357448 = ADVANCED_FACE('',(#357449),#357465,.T.); +#357449 = FACE_BOUND('',#357450,.T.); +#357450 = EDGE_LOOP('',(#357451,#357452,#357458,#357459)); +#357451 = ORIENTED_EDGE('',*,*,#357429,.T.); +#357452 = ORIENTED_EDGE('',*,*,#357453,.T.); +#357453 = EDGE_CURVE('',#357421,#357221,#357454,.T.); +#357454 = LINE('',#357455,#357456); +#357455 = CARTESIAN_POINT('',(126.23,-88.085,1.55)); +#357456 = VECTOR('',#357457,1.); +#357457 = DIRECTION('',(0.,1.,0.)); +#357458 = ORIENTED_EDGE('',*,*,#357218,.F.); +#357459 = ORIENTED_EDGE('',*,*,#357460,.F.); +#357460 = EDGE_CURVE('',#357430,#357219,#357461,.T.); +#357461 = LINE('',#357462,#357463); +#357462 = CARTESIAN_POINT('',(126.23,-88.085,1.51)); +#357463 = VECTOR('',#357464,1.); +#357464 = DIRECTION('',(0.,1.,0.)); +#357465 = PLANE('',#357466); +#357466 = AXIS2_PLACEMENT_3D('',#357467,#357468,#357469); +#357467 = CARTESIAN_POINT('',(126.23,-88.085,1.51)); +#357468 = DIRECTION('',(-1.,0.,0.)); +#357469 = DIRECTION('',(0.,1.,0.)); +#357470 = ADVANCED_FACE('',(#357471),#357481,.F.); +#357471 = FACE_BOUND('',#357472,.T.); +#357472 = EDGE_LOOP('',(#357473,#357474,#357475,#357476,#357477,#357478, + #357479,#357480)); +#357473 = ORIENTED_EDGE('',*,*,#357245,.T.); +#357474 = ORIENTED_EDGE('',*,*,#357277,.T.); +#357475 = ORIENTED_EDGE('',*,*,#357309,.T.); +#357476 = ORIENTED_EDGE('',*,*,#357341,.T.); +#357477 = ORIENTED_EDGE('',*,*,#357373,.T.); +#357478 = ORIENTED_EDGE('',*,*,#357405,.T.); +#357479 = ORIENTED_EDGE('',*,*,#357437,.T.); +#357480 = ORIENTED_EDGE('',*,*,#357460,.T.); +#357481 = PLANE('',#357482); +#357482 = AXIS2_PLACEMENT_3D('',#357483,#357484,#357485); +#357483 = CARTESIAN_POINT('',(0.,0.,1.51)); +#357484 = DIRECTION('',(0.,0.,1.)); +#357485 = DIRECTION('',(1.,0.,-0.)); +#357486 = ADVANCED_FACE('',(#357487),#357497,.T.); +#357487 = FACE_BOUND('',#357488,.F.); +#357488 = EDGE_LOOP('',(#357489,#357490,#357491,#357492,#357493,#357494, + #357495,#357496)); +#357489 = ORIENTED_EDGE('',*,*,#357228,.T.); +#357490 = ORIENTED_EDGE('',*,*,#357261,.T.); +#357491 = ORIENTED_EDGE('',*,*,#357292,.T.); +#357492 = ORIENTED_EDGE('',*,*,#357325,.T.); +#357493 = ORIENTED_EDGE('',*,*,#357356,.T.); +#357494 = ORIENTED_EDGE('',*,*,#357389,.T.); +#357495 = ORIENTED_EDGE('',*,*,#357420,.T.); +#357496 = ORIENTED_EDGE('',*,*,#357453,.T.); +#357497 = PLANE('',#357498); +#357498 = AXIS2_PLACEMENT_3D('',#357499,#357500,#357501); +#357499 = CARTESIAN_POINT('',(0.,0.,1.55)); +#357500 = DIRECTION('',(0.,0.,1.)); +#357501 = DIRECTION('',(1.,0.,-0.)); +#357502 = MANIFOLD_SOLID_BREP('',#357503); +#357503 = CLOSED_SHELL('',(#357504,#357537,#357557,#357577)); +#357504 = ADVANCED_FACE('',(#357505),#357532,.T.); +#357505 = FACE_BOUND('',#357506,.F.); +#357506 = EDGE_LOOP('',(#357507,#357517,#357524,#357525)); +#357507 = ORIENTED_EDGE('',*,*,#357508,.T.); +#357508 = EDGE_CURVE('',#357509,#357511,#357513,.T.); +#357509 = VERTEX_POINT('',#357510); +#357510 = CARTESIAN_POINT('',(128.7155,-149.5,1.51)); +#357511 = VERTEX_POINT('',#357512); +#357512 = CARTESIAN_POINT('',(128.7155,-149.5,1.55)); +#357513 = LINE('',#357514,#357515); +#357514 = CARTESIAN_POINT('',(128.7155,-149.5,1.51)); +#357515 = VECTOR('',#357516,1.); +#357516 = DIRECTION('',(0.,0.,1.)); +#357517 = ORIENTED_EDGE('',*,*,#357518,.T.); +#357518 = EDGE_CURVE('',#357511,#357511,#357519,.T.); +#357519 = CIRCLE('',#357520,0.7155); +#357520 = AXIS2_PLACEMENT_3D('',#357521,#357522,#357523); +#357521 = CARTESIAN_POINT('',(128.,-149.5,1.55)); +#357522 = DIRECTION('',(0.,0.,1.)); +#357523 = DIRECTION('',(1.,0.,-0.)); +#357524 = ORIENTED_EDGE('',*,*,#357508,.F.); +#357525 = ORIENTED_EDGE('',*,*,#357526,.F.); +#357526 = EDGE_CURVE('',#357509,#357509,#357527,.T.); +#357527 = CIRCLE('',#357528,0.7155); +#357528 = AXIS2_PLACEMENT_3D('',#357529,#357530,#357531); +#357529 = CARTESIAN_POINT('',(128.,-149.5,1.51)); +#357530 = DIRECTION('',(0.,0.,1.)); +#357531 = DIRECTION('',(1.,0.,-0.)); +#357532 = CYLINDRICAL_SURFACE('',#357533,0.7155); +#357533 = AXIS2_PLACEMENT_3D('',#357534,#357535,#357536); +#357534 = CARTESIAN_POINT('',(128.,-149.5,1.51)); +#357535 = DIRECTION('',(-0.,-0.,-1.)); +#357536 = DIRECTION('',(1.,0.,-0.)); +#357537 = ADVANCED_FACE('',(#357538,#357541),#357552,.F.); +#357538 = FACE_BOUND('',#357539,.F.); +#357539 = EDGE_LOOP('',(#357540)); +#357540 = ORIENTED_EDGE('',*,*,#357526,.T.); +#357541 = FACE_BOUND('',#357542,.F.); +#357542 = EDGE_LOOP('',(#357543)); +#357543 = ORIENTED_EDGE('',*,*,#357544,.T.); +#357544 = EDGE_CURVE('',#357545,#357545,#357547,.T.); +#357545 = VERTEX_POINT('',#357546); +#357546 = CARTESIAN_POINT('',(128.,-149.935,1.51)); +#357547 = CIRCLE('',#357548,0.435); +#357548 = AXIS2_PLACEMENT_3D('',#357549,#357550,#357551); +#357549 = CARTESIAN_POINT('',(128.,-149.5,1.51)); +#357550 = DIRECTION('',(-0.,0.,-1.)); +#357551 = DIRECTION('',(-0.,-1.,0.)); +#357552 = PLANE('',#357553); +#357553 = AXIS2_PLACEMENT_3D('',#357554,#357555,#357556); +#357554 = CARTESIAN_POINT('',(0.,0.,1.51)); +#357555 = DIRECTION('',(0.,0.,1.)); +#357556 = DIRECTION('',(1.,0.,-0.)); +#357557 = ADVANCED_FACE('',(#357558,#357561),#357572,.T.); +#357558 = FACE_BOUND('',#357559,.T.); +#357559 = EDGE_LOOP('',(#357560)); +#357560 = ORIENTED_EDGE('',*,*,#357518,.T.); +#357561 = FACE_BOUND('',#357562,.T.); +#357562 = EDGE_LOOP('',(#357563)); +#357563 = ORIENTED_EDGE('',*,*,#357564,.T.); +#357564 = EDGE_CURVE('',#357565,#357565,#357567,.T.); +#357565 = VERTEX_POINT('',#357566); +#357566 = CARTESIAN_POINT('',(128.,-149.935,1.55)); +#357567 = CIRCLE('',#357568,0.435); +#357568 = AXIS2_PLACEMENT_3D('',#357569,#357570,#357571); +#357569 = CARTESIAN_POINT('',(128.,-149.5,1.55)); +#357570 = DIRECTION('',(-0.,0.,-1.)); +#357571 = DIRECTION('',(-0.,-1.,0.)); +#357572 = PLANE('',#357573); +#357573 = AXIS2_PLACEMENT_3D('',#357574,#357575,#357576); +#357574 = CARTESIAN_POINT('',(0.,0.,1.55)); +#357575 = DIRECTION('',(0.,0.,1.)); +#357576 = DIRECTION('',(1.,0.,-0.)); +#357577 = ADVANCED_FACE('',(#357578),#357589,.F.); +#357578 = FACE_BOUND('',#357579,.T.); +#357579 = EDGE_LOOP('',(#357580,#357581,#357587,#357588)); +#357580 = ORIENTED_EDGE('',*,*,#357544,.T.); +#357581 = ORIENTED_EDGE('',*,*,#357582,.T.); +#357582 = EDGE_CURVE('',#357545,#357565,#357583,.T.); +#357583 = LINE('',#357584,#357585); +#357584 = CARTESIAN_POINT('',(128.,-149.935,-4.6E-02)); +#357585 = VECTOR('',#357586,1.); +#357586 = DIRECTION('',(0.,0.,1.)); +#357587 = ORIENTED_EDGE('',*,*,#357564,.F.); +#357588 = ORIENTED_EDGE('',*,*,#357582,.F.); +#357589 = CYLINDRICAL_SURFACE('',#357590,0.435); +#357590 = AXIS2_PLACEMENT_3D('',#357591,#357592,#357593); +#357591 = CARTESIAN_POINT('',(128.,-149.5,-4.6E-02)); +#357592 = DIRECTION('',(-0.,-0.,-1.)); +#357593 = DIRECTION('',(-0.,-1.,0.)); +#357594 = MANIFOLD_SOLID_BREP('',#357595); +#357595 = CLOSED_SHELL('',(#357596,#357629,#357649,#357669)); +#357596 = ADVANCED_FACE('',(#357597),#357624,.T.); +#357597 = FACE_BOUND('',#357598,.T.); +#357598 = EDGE_LOOP('',(#357599,#357609,#357616,#357617)); +#357599 = ORIENTED_EDGE('',*,*,#357600,.T.); +#357600 = EDGE_CURVE('',#357601,#357603,#357605,.T.); +#357601 = VERTEX_POINT('',#357602); +#357602 = CARTESIAN_POINT('',(128.7155,-149.5,0.)); +#357603 = VERTEX_POINT('',#357604); +#357604 = CARTESIAN_POINT('',(128.7155,-149.5,-4.E-02)); +#357605 = LINE('',#357606,#357607); +#357606 = CARTESIAN_POINT('',(128.7155,-149.5,0.)); +#357607 = VECTOR('',#357608,1.); +#357608 = DIRECTION('',(0.,0.,-1.)); +#357609 = ORIENTED_EDGE('',*,*,#357610,.T.); +#357610 = EDGE_CURVE('',#357603,#357603,#357611,.T.); +#357611 = CIRCLE('',#357612,0.7155); +#357612 = AXIS2_PLACEMENT_3D('',#357613,#357614,#357615); +#357613 = CARTESIAN_POINT('',(128.,-149.5,-4.E-02)); +#357614 = DIRECTION('',(0.,0.,1.)); +#357615 = DIRECTION('',(1.,0.,-0.)); +#357616 = ORIENTED_EDGE('',*,*,#357600,.F.); +#357617 = ORIENTED_EDGE('',*,*,#357618,.F.); +#357618 = EDGE_CURVE('',#357601,#357601,#357619,.T.); +#357619 = CIRCLE('',#357620,0.7155); +#357620 = AXIS2_PLACEMENT_3D('',#357621,#357622,#357623); +#357621 = CARTESIAN_POINT('',(128.,-149.5,0.)); +#357622 = DIRECTION('',(0.,0.,1.)); +#357623 = DIRECTION('',(1.,0.,-0.)); +#357624 = CYLINDRICAL_SURFACE('',#357625,0.7155); +#357625 = AXIS2_PLACEMENT_3D('',#357626,#357627,#357628); +#357626 = CARTESIAN_POINT('',(128.,-149.5,0.)); +#357627 = DIRECTION('',(0.,0.,1.)); +#357628 = DIRECTION('',(1.,0.,-0.)); +#357629 = ADVANCED_FACE('',(#357630,#357633),#357644,.F.); +#357630 = FACE_BOUND('',#357631,.F.); +#357631 = EDGE_LOOP('',(#357632)); +#357632 = ORIENTED_EDGE('',*,*,#357618,.F.); +#357633 = FACE_BOUND('',#357634,.F.); +#357634 = EDGE_LOOP('',(#357635)); +#357635 = ORIENTED_EDGE('',*,*,#357636,.F.); +#357636 = EDGE_CURVE('',#357637,#357637,#357639,.T.); +#357637 = VERTEX_POINT('',#357638); +#357638 = CARTESIAN_POINT('',(128.,-149.935,0.)); +#357639 = CIRCLE('',#357640,0.435); +#357640 = AXIS2_PLACEMENT_3D('',#357641,#357642,#357643); +#357641 = CARTESIAN_POINT('',(128.,-149.5,0.)); +#357642 = DIRECTION('',(-0.,0.,-1.)); +#357643 = DIRECTION('',(-0.,-1.,0.)); +#357644 = PLANE('',#357645); +#357645 = AXIS2_PLACEMENT_3D('',#357646,#357647,#357648); +#357646 = CARTESIAN_POINT('',(0.,0.,0.)); +#357647 = DIRECTION('',(-0.,-0.,-1.)); +#357648 = DIRECTION('',(-1.,0.,0.)); +#357649 = ADVANCED_FACE('',(#357650,#357653),#357664,.T.); +#357650 = FACE_BOUND('',#357651,.T.); +#357651 = EDGE_LOOP('',(#357652)); +#357652 = ORIENTED_EDGE('',*,*,#357610,.F.); +#357653 = FACE_BOUND('',#357654,.T.); +#357654 = EDGE_LOOP('',(#357655)); +#357655 = ORIENTED_EDGE('',*,*,#357656,.F.); +#357656 = EDGE_CURVE('',#357657,#357657,#357659,.T.); +#357657 = VERTEX_POINT('',#357658); +#357658 = CARTESIAN_POINT('',(128.,-149.935,-4.E-02)); +#357659 = CIRCLE('',#357660,0.435); +#357660 = AXIS2_PLACEMENT_3D('',#357661,#357662,#357663); +#357661 = CARTESIAN_POINT('',(128.,-149.5,-4.E-02)); +#357662 = DIRECTION('',(-0.,0.,-1.)); +#357663 = DIRECTION('',(-0.,-1.,0.)); +#357664 = PLANE('',#357665); +#357665 = AXIS2_PLACEMENT_3D('',#357666,#357667,#357668); +#357666 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#357667 = DIRECTION('',(-0.,-0.,-1.)); +#357668 = DIRECTION('',(-1.,0.,0.)); +#357669 = ADVANCED_FACE('',(#357670),#357681,.F.); +#357670 = FACE_BOUND('',#357671,.T.); +#357671 = EDGE_LOOP('',(#357672,#357673,#357679,#357680)); +#357672 = ORIENTED_EDGE('',*,*,#357656,.T.); +#357673 = ORIENTED_EDGE('',*,*,#357674,.T.); +#357674 = EDGE_CURVE('',#357657,#357637,#357675,.T.); +#357675 = LINE('',#357676,#357677); +#357676 = CARTESIAN_POINT('',(128.,-149.935,-4.6E-02)); +#357677 = VECTOR('',#357678,1.); +#357678 = DIRECTION('',(0.,0.,1.)); +#357679 = ORIENTED_EDGE('',*,*,#357636,.F.); +#357680 = ORIENTED_EDGE('',*,*,#357674,.F.); +#357681 = CYLINDRICAL_SURFACE('',#357682,0.435); +#357682 = AXIS2_PLACEMENT_3D('',#357683,#357684,#357685); +#357683 = CARTESIAN_POINT('',(128.,-149.5,-4.6E-02)); +#357684 = DIRECTION('',(-0.,-0.,-1.)); +#357685 = DIRECTION('',(-0.,-1.,0.)); +#357686 = MANIFOLD_SOLID_BREP('',#357687); +#357687 = CLOSED_SHELL('',(#357688,#357721,#357741,#357761)); +#357688 = ADVANCED_FACE('',(#357689),#357716,.T.); +#357689 = FACE_BOUND('',#357690,.F.); +#357690 = EDGE_LOOP('',(#357691,#357701,#357708,#357709)); +#357691 = ORIENTED_EDGE('',*,*,#357692,.T.); +#357692 = EDGE_CURVE('',#357693,#357695,#357697,.T.); +#357693 = VERTEX_POINT('',#357694); +#357694 = CARTESIAN_POINT('',(128.,-149.96,-4.E-02)); +#357695 = VERTEX_POINT('',#357696); +#357696 = CARTESIAN_POINT('',(128.,-149.96,1.55)); +#357697 = LINE('',#357698,#357699); +#357698 = CARTESIAN_POINT('',(128.,-149.96,-4.E-02)); +#357699 = VECTOR('',#357700,1.); +#357700 = DIRECTION('',(0.,0.,1.)); +#357701 = ORIENTED_EDGE('',*,*,#357702,.T.); +#357702 = EDGE_CURVE('',#357695,#357695,#357703,.T.); +#357703 = CIRCLE('',#357704,0.46); +#357704 = AXIS2_PLACEMENT_3D('',#357705,#357706,#357707); +#357705 = CARTESIAN_POINT('',(128.,-149.5,1.55)); +#357706 = DIRECTION('',(0.,0.,1.)); +#357707 = DIRECTION('',(-0.,-1.,0.)); +#357708 = ORIENTED_EDGE('',*,*,#357692,.F.); +#357709 = ORIENTED_EDGE('',*,*,#357710,.F.); +#357710 = EDGE_CURVE('',#357693,#357693,#357711,.T.); +#357711 = CIRCLE('',#357712,0.46); +#357712 = AXIS2_PLACEMENT_3D('',#357713,#357714,#357715); +#357713 = CARTESIAN_POINT('',(128.,-149.5,-4.E-02)); +#357714 = DIRECTION('',(0.,0.,1.)); +#357715 = DIRECTION('',(-0.,-1.,0.)); +#357716 = CYLINDRICAL_SURFACE('',#357717,0.46); +#357717 = AXIS2_PLACEMENT_3D('',#357718,#357719,#357720); +#357718 = CARTESIAN_POINT('',(128.,-149.5,-4.E-02)); +#357719 = DIRECTION('',(-0.,-0.,-1.)); +#357720 = DIRECTION('',(-0.,-1.,0.)); +#357721 = ADVANCED_FACE('',(#357722,#357725),#357736,.F.); +#357722 = FACE_BOUND('',#357723,.F.); +#357723 = EDGE_LOOP('',(#357724)); +#357724 = ORIENTED_EDGE('',*,*,#357710,.T.); +#357725 = FACE_BOUND('',#357726,.F.); +#357726 = EDGE_LOOP('',(#357727)); +#357727 = ORIENTED_EDGE('',*,*,#357728,.T.); +#357728 = EDGE_CURVE('',#357729,#357729,#357731,.T.); +#357729 = VERTEX_POINT('',#357730); +#357730 = CARTESIAN_POINT('',(128.,-149.935,-4.E-02)); +#357731 = CIRCLE('',#357732,0.435); +#357732 = AXIS2_PLACEMENT_3D('',#357733,#357734,#357735); +#357733 = CARTESIAN_POINT('',(128.,-149.5,-4.E-02)); +#357734 = DIRECTION('',(-0.,0.,-1.)); +#357735 = DIRECTION('',(-0.,-1.,0.)); +#357736 = PLANE('',#357737); +#357737 = AXIS2_PLACEMENT_3D('',#357738,#357739,#357740); +#357738 = CARTESIAN_POINT('',(128.,-149.96,-4.E-02)); +#357739 = DIRECTION('',(0.,0.,1.)); +#357740 = DIRECTION('',(1.,0.,-0.)); +#357741 = ADVANCED_FACE('',(#357742,#357745),#357756,.T.); +#357742 = FACE_BOUND('',#357743,.T.); +#357743 = EDGE_LOOP('',(#357744)); +#357744 = ORIENTED_EDGE('',*,*,#357702,.T.); +#357745 = FACE_BOUND('',#357746,.T.); +#357746 = EDGE_LOOP('',(#357747)); +#357747 = ORIENTED_EDGE('',*,*,#357748,.T.); +#357748 = EDGE_CURVE('',#357749,#357749,#357751,.T.); +#357749 = VERTEX_POINT('',#357750); +#357750 = CARTESIAN_POINT('',(128.,-149.935,1.55)); +#357751 = CIRCLE('',#357752,0.435); +#357752 = AXIS2_PLACEMENT_3D('',#357753,#357754,#357755); +#357753 = CARTESIAN_POINT('',(128.,-149.5,1.55)); +#357754 = DIRECTION('',(-0.,0.,-1.)); +#357755 = DIRECTION('',(-0.,-1.,0.)); +#357756 = PLANE('',#357757); +#357757 = AXIS2_PLACEMENT_3D('',#357758,#357759,#357760); +#357758 = CARTESIAN_POINT('',(128.,-149.96,1.55)); +#357759 = DIRECTION('',(0.,0.,1.)); +#357760 = DIRECTION('',(1.,0.,-0.)); +#357761 = ADVANCED_FACE('',(#357762),#357773,.F.); +#357762 = FACE_BOUND('',#357763,.T.); +#357763 = EDGE_LOOP('',(#357764,#357765,#357771,#357772)); +#357764 = ORIENTED_EDGE('',*,*,#357728,.T.); +#357765 = ORIENTED_EDGE('',*,*,#357766,.T.); +#357766 = EDGE_CURVE('',#357729,#357749,#357767,.T.); +#357767 = LINE('',#357768,#357769); +#357768 = CARTESIAN_POINT('',(128.,-149.935,-4.6E-02)); +#357769 = VECTOR('',#357770,1.); +#357770 = DIRECTION('',(0.,0.,1.)); +#357771 = ORIENTED_EDGE('',*,*,#357748,.F.); +#357772 = ORIENTED_EDGE('',*,*,#357766,.F.); +#357773 = CYLINDRICAL_SURFACE('',#357774,0.435); +#357774 = AXIS2_PLACEMENT_3D('',#357775,#357776,#357777); +#357775 = CARTESIAN_POINT('',(128.,-149.5,-4.6E-02)); +#357776 = DIRECTION('',(-0.,-0.,-1.)); +#357777 = DIRECTION('',(-0.,-1.,0.)); +#357778 = MANIFOLD_SOLID_BREP('',#357779); +#357779 = CLOSED_SHELL('',(#357780,#357820,#357851,#357882,#357904, + #357916)); +#357780 = ADVANCED_FACE('',(#357781),#357815,.T.); +#357781 = FACE_BOUND('',#357782,.T.); +#357782 = EDGE_LOOP('',(#357783,#357793,#357801,#357809)); +#357783 = ORIENTED_EDGE('',*,*,#357784,.T.); +#357784 = EDGE_CURVE('',#357785,#357787,#357789,.T.); +#357785 = VERTEX_POINT('',#357786); +#357786 = CARTESIAN_POINT('',(139.455,-83.16,1.51)); +#357787 = VERTEX_POINT('',#357788); +#357788 = CARTESIAN_POINT('',(139.455,-83.16,1.55)); +#357789 = LINE('',#357790,#357791); +#357790 = CARTESIAN_POINT('',(139.455,-83.16,1.51)); +#357791 = VECTOR('',#357792,1.); +#357792 = DIRECTION('',(0.,0.,1.)); +#357793 = ORIENTED_EDGE('',*,*,#357794,.T.); +#357794 = EDGE_CURVE('',#357787,#357795,#357797,.T.); +#357795 = VERTEX_POINT('',#357796); +#357796 = CARTESIAN_POINT('',(139.455,-81.66,1.55)); +#357797 = LINE('',#357798,#357799); +#357798 = CARTESIAN_POINT('',(139.455,-83.16,1.55)); +#357799 = VECTOR('',#357800,1.); +#357800 = DIRECTION('',(0.,1.,0.)); +#357801 = ORIENTED_EDGE('',*,*,#357802,.F.); +#357802 = EDGE_CURVE('',#357803,#357795,#357805,.T.); +#357803 = VERTEX_POINT('',#357804); +#357804 = CARTESIAN_POINT('',(139.455,-81.66,1.51)); +#357805 = LINE('',#357806,#357807); +#357806 = CARTESIAN_POINT('',(139.455,-81.66,1.51)); +#357807 = VECTOR('',#357808,1.); +#357808 = DIRECTION('',(0.,0.,1.)); +#357809 = ORIENTED_EDGE('',*,*,#357810,.F.); +#357810 = EDGE_CURVE('',#357785,#357803,#357811,.T.); +#357811 = LINE('',#357812,#357813); +#357812 = CARTESIAN_POINT('',(139.455,-83.16,1.51)); +#357813 = VECTOR('',#357814,1.); +#357814 = DIRECTION('',(0.,1.,0.)); +#357815 = PLANE('',#357816); +#357816 = AXIS2_PLACEMENT_3D('',#357817,#357818,#357819); +#357817 = CARTESIAN_POINT('',(139.455,-83.16,1.51)); +#357818 = DIRECTION('',(-1.,0.,0.)); +#357819 = DIRECTION('',(0.,1.,0.)); +#357820 = ADVANCED_FACE('',(#357821),#357846,.T.); +#357821 = FACE_BOUND('',#357822,.T.); +#357822 = EDGE_LOOP('',(#357823,#357824,#357832,#357840)); +#357823 = ORIENTED_EDGE('',*,*,#357802,.T.); +#357824 = ORIENTED_EDGE('',*,*,#357825,.T.); +#357825 = EDGE_CURVE('',#357795,#357826,#357828,.T.); +#357826 = VERTEX_POINT('',#357827); +#357827 = CARTESIAN_POINT('',(140.355,-81.66,1.55)); +#357828 = LINE('',#357829,#357830); +#357829 = CARTESIAN_POINT('',(139.455,-81.66,1.55)); +#357830 = VECTOR('',#357831,1.); +#357831 = DIRECTION('',(1.,0.,0.)); +#357832 = ORIENTED_EDGE('',*,*,#357833,.F.); +#357833 = EDGE_CURVE('',#357834,#357826,#357836,.T.); +#357834 = VERTEX_POINT('',#357835); +#357835 = CARTESIAN_POINT('',(140.355,-81.66,1.51)); +#357836 = LINE('',#357837,#357838); +#357837 = CARTESIAN_POINT('',(140.355,-81.66,1.51)); +#357838 = VECTOR('',#357839,1.); +#357839 = DIRECTION('',(0.,0.,1.)); +#357840 = ORIENTED_EDGE('',*,*,#357841,.F.); +#357841 = EDGE_CURVE('',#357803,#357834,#357842,.T.); +#357842 = LINE('',#357843,#357844); +#357843 = CARTESIAN_POINT('',(139.455,-81.66,1.51)); +#357844 = VECTOR('',#357845,1.); +#357845 = DIRECTION('',(1.,0.,0.)); +#357846 = PLANE('',#357847); +#357847 = AXIS2_PLACEMENT_3D('',#357848,#357849,#357850); +#357848 = CARTESIAN_POINT('',(139.455,-81.66,1.51)); +#357849 = DIRECTION('',(0.,1.,0.)); +#357850 = DIRECTION('',(1.,0.,0.)); +#357851 = ADVANCED_FACE('',(#357852),#357877,.T.); +#357852 = FACE_BOUND('',#357853,.T.); +#357853 = EDGE_LOOP('',(#357854,#357855,#357863,#357871)); +#357854 = ORIENTED_EDGE('',*,*,#357833,.T.); +#357855 = ORIENTED_EDGE('',*,*,#357856,.T.); +#357856 = EDGE_CURVE('',#357826,#357857,#357859,.T.); +#357857 = VERTEX_POINT('',#357858); +#357858 = CARTESIAN_POINT('',(140.355,-83.16,1.55)); +#357859 = LINE('',#357860,#357861); +#357860 = CARTESIAN_POINT('',(140.355,-81.66,1.55)); +#357861 = VECTOR('',#357862,1.); +#357862 = DIRECTION('',(0.,-1.,0.)); +#357863 = ORIENTED_EDGE('',*,*,#357864,.F.); +#357864 = EDGE_CURVE('',#357865,#357857,#357867,.T.); +#357865 = VERTEX_POINT('',#357866); +#357866 = CARTESIAN_POINT('',(140.355,-83.16,1.51)); +#357867 = LINE('',#357868,#357869); +#357868 = CARTESIAN_POINT('',(140.355,-83.16,1.51)); +#357869 = VECTOR('',#357870,1.); +#357870 = DIRECTION('',(0.,0.,1.)); +#357871 = ORIENTED_EDGE('',*,*,#357872,.F.); +#357872 = EDGE_CURVE('',#357834,#357865,#357873,.T.); +#357873 = LINE('',#357874,#357875); +#357874 = CARTESIAN_POINT('',(140.355,-81.66,1.51)); +#357875 = VECTOR('',#357876,1.); +#357876 = DIRECTION('',(0.,-1.,0.)); +#357877 = PLANE('',#357878); +#357878 = AXIS2_PLACEMENT_3D('',#357879,#357880,#357881); +#357879 = CARTESIAN_POINT('',(140.355,-81.66,1.51)); +#357880 = DIRECTION('',(1.,0.,-0.)); +#357881 = DIRECTION('',(0.,-1.,0.)); +#357882 = ADVANCED_FACE('',(#357883),#357899,.T.); +#357883 = FACE_BOUND('',#357884,.T.); +#357884 = EDGE_LOOP('',(#357885,#357886,#357892,#357893)); +#357885 = ORIENTED_EDGE('',*,*,#357864,.T.); +#357886 = ORIENTED_EDGE('',*,*,#357887,.T.); +#357887 = EDGE_CURVE('',#357857,#357787,#357888,.T.); +#357888 = LINE('',#357889,#357890); +#357889 = CARTESIAN_POINT('',(140.355,-83.16,1.55)); +#357890 = VECTOR('',#357891,1.); +#357891 = DIRECTION('',(-1.,0.,0.)); +#357892 = ORIENTED_EDGE('',*,*,#357784,.F.); +#357893 = ORIENTED_EDGE('',*,*,#357894,.F.); +#357894 = EDGE_CURVE('',#357865,#357785,#357895,.T.); +#357895 = LINE('',#357896,#357897); +#357896 = CARTESIAN_POINT('',(140.355,-83.16,1.51)); +#357897 = VECTOR('',#357898,1.); +#357898 = DIRECTION('',(-1.,0.,0.)); +#357899 = PLANE('',#357900); +#357900 = AXIS2_PLACEMENT_3D('',#357901,#357902,#357903); +#357901 = CARTESIAN_POINT('',(140.355,-83.16,1.51)); +#357902 = DIRECTION('',(0.,-1.,0.)); +#357903 = DIRECTION('',(-1.,0.,0.)); +#357904 = ADVANCED_FACE('',(#357905),#357911,.F.); +#357905 = FACE_BOUND('',#357906,.T.); +#357906 = EDGE_LOOP('',(#357907,#357908,#357909,#357910)); +#357907 = ORIENTED_EDGE('',*,*,#357810,.T.); +#357908 = ORIENTED_EDGE('',*,*,#357841,.T.); +#357909 = ORIENTED_EDGE('',*,*,#357872,.T.); +#357910 = ORIENTED_EDGE('',*,*,#357894,.T.); +#357911 = PLANE('',#357912); +#357912 = AXIS2_PLACEMENT_3D('',#357913,#357914,#357915); +#357913 = CARTESIAN_POINT('',(0.,0.,1.51)); +#357914 = DIRECTION('',(0.,0.,1.)); +#357915 = DIRECTION('',(1.,0.,-0.)); +#357916 = ADVANCED_FACE('',(#357917),#357923,.T.); +#357917 = FACE_BOUND('',#357918,.F.); +#357918 = EDGE_LOOP('',(#357919,#357920,#357921,#357922)); +#357919 = ORIENTED_EDGE('',*,*,#357794,.T.); +#357920 = ORIENTED_EDGE('',*,*,#357825,.T.); +#357921 = ORIENTED_EDGE('',*,*,#357856,.T.); +#357922 = ORIENTED_EDGE('',*,*,#357887,.T.); +#357923 = PLANE('',#357924); +#357924 = AXIS2_PLACEMENT_3D('',#357925,#357926,#357927); +#357925 = CARTESIAN_POINT('',(0.,0.,1.55)); +#357926 = DIRECTION('',(0.,0.,1.)); +#357927 = DIRECTION('',(1.,0.,-0.)); +#357928 = MANIFOLD_SOLID_BREP('',#357929); +#357929 = CLOSED_SHELL('',(#357930,#357963,#357983,#358003)); +#357930 = ADVANCED_FACE('',(#357931),#357958,.T.); +#357931 = FACE_BOUND('',#357932,.F.); +#357932 = EDGE_LOOP('',(#357933,#357943,#357950,#357951)); +#357933 = ORIENTED_EDGE('',*,*,#357934,.T.); +#357934 = EDGE_CURVE('',#357935,#357937,#357939,.T.); +#357935 = VERTEX_POINT('',#357936); +#357936 = CARTESIAN_POINT('',(136.7155,-149.5,1.51)); +#357937 = VERTEX_POINT('',#357938); +#357938 = CARTESIAN_POINT('',(136.7155,-149.5,1.55)); +#357939 = LINE('',#357940,#357941); +#357940 = CARTESIAN_POINT('',(136.7155,-149.5,1.51)); +#357941 = VECTOR('',#357942,1.); +#357942 = DIRECTION('',(0.,0.,1.)); +#357943 = ORIENTED_EDGE('',*,*,#357944,.T.); +#357944 = EDGE_CURVE('',#357937,#357937,#357945,.T.); +#357945 = CIRCLE('',#357946,0.7155); +#357946 = AXIS2_PLACEMENT_3D('',#357947,#357948,#357949); +#357947 = CARTESIAN_POINT('',(136.,-149.5,1.55)); +#357948 = DIRECTION('',(0.,0.,1.)); +#357949 = DIRECTION('',(1.,0.,-0.)); +#357950 = ORIENTED_EDGE('',*,*,#357934,.F.); +#357951 = ORIENTED_EDGE('',*,*,#357952,.F.); +#357952 = EDGE_CURVE('',#357935,#357935,#357953,.T.); +#357953 = CIRCLE('',#357954,0.7155); +#357954 = AXIS2_PLACEMENT_3D('',#357955,#357956,#357957); +#357955 = CARTESIAN_POINT('',(136.,-149.5,1.51)); +#357956 = DIRECTION('',(0.,0.,1.)); +#357957 = DIRECTION('',(1.,0.,-0.)); +#357958 = CYLINDRICAL_SURFACE('',#357959,0.7155); +#357959 = AXIS2_PLACEMENT_3D('',#357960,#357961,#357962); +#357960 = CARTESIAN_POINT('',(136.,-149.5,1.51)); +#357961 = DIRECTION('',(-0.,-0.,-1.)); +#357962 = DIRECTION('',(1.,0.,-0.)); +#357963 = ADVANCED_FACE('',(#357964,#357967),#357978,.F.); +#357964 = FACE_BOUND('',#357965,.F.); +#357965 = EDGE_LOOP('',(#357966)); +#357966 = ORIENTED_EDGE('',*,*,#357952,.T.); +#357967 = FACE_BOUND('',#357968,.F.); +#357968 = EDGE_LOOP('',(#357969)); +#357969 = ORIENTED_EDGE('',*,*,#357970,.T.); +#357970 = EDGE_CURVE('',#357971,#357971,#357973,.T.); +#357971 = VERTEX_POINT('',#357972); +#357972 = CARTESIAN_POINT('',(136.,-149.935,1.51)); +#357973 = CIRCLE('',#357974,0.435); +#357974 = AXIS2_PLACEMENT_3D('',#357975,#357976,#357977); +#357975 = CARTESIAN_POINT('',(136.,-149.5,1.51)); +#357976 = DIRECTION('',(-0.,0.,-1.)); +#357977 = DIRECTION('',(-0.,-1.,0.)); +#357978 = PLANE('',#357979); +#357979 = AXIS2_PLACEMENT_3D('',#357980,#357981,#357982); +#357980 = CARTESIAN_POINT('',(0.,0.,1.51)); +#357981 = DIRECTION('',(0.,0.,1.)); +#357982 = DIRECTION('',(1.,0.,-0.)); +#357983 = ADVANCED_FACE('',(#357984,#357987),#357998,.T.); +#357984 = FACE_BOUND('',#357985,.T.); +#357985 = EDGE_LOOP('',(#357986)); +#357986 = ORIENTED_EDGE('',*,*,#357944,.T.); +#357987 = FACE_BOUND('',#357988,.T.); +#357988 = EDGE_LOOP('',(#357989)); +#357989 = ORIENTED_EDGE('',*,*,#357990,.T.); +#357990 = EDGE_CURVE('',#357991,#357991,#357993,.T.); +#357991 = VERTEX_POINT('',#357992); +#357992 = CARTESIAN_POINT('',(136.,-149.935,1.55)); +#357993 = CIRCLE('',#357994,0.435); +#357994 = AXIS2_PLACEMENT_3D('',#357995,#357996,#357997); +#357995 = CARTESIAN_POINT('',(136.,-149.5,1.55)); +#357996 = DIRECTION('',(-0.,0.,-1.)); +#357997 = DIRECTION('',(-0.,-1.,0.)); +#357998 = PLANE('',#357999); +#357999 = AXIS2_PLACEMENT_3D('',#358000,#358001,#358002); +#358000 = CARTESIAN_POINT('',(0.,0.,1.55)); +#358001 = DIRECTION('',(0.,0.,1.)); +#358002 = DIRECTION('',(1.,0.,-0.)); +#358003 = ADVANCED_FACE('',(#358004),#358015,.F.); +#358004 = FACE_BOUND('',#358005,.T.); +#358005 = EDGE_LOOP('',(#358006,#358007,#358013,#358014)); +#358006 = ORIENTED_EDGE('',*,*,#357970,.T.); +#358007 = ORIENTED_EDGE('',*,*,#358008,.T.); +#358008 = EDGE_CURVE('',#357971,#357991,#358009,.T.); +#358009 = LINE('',#358010,#358011); +#358010 = CARTESIAN_POINT('',(136.,-149.935,-4.6E-02)); +#358011 = VECTOR('',#358012,1.); +#358012 = DIRECTION('',(0.,0.,1.)); +#358013 = ORIENTED_EDGE('',*,*,#357990,.F.); +#358014 = ORIENTED_EDGE('',*,*,#358008,.F.); +#358015 = CYLINDRICAL_SURFACE('',#358016,0.435); +#358016 = AXIS2_PLACEMENT_3D('',#358017,#358018,#358019); +#358017 = CARTESIAN_POINT('',(136.,-149.5,-4.6E-02)); +#358018 = DIRECTION('',(-0.,-0.,-1.)); +#358019 = DIRECTION('',(-0.,-1.,0.)); +#358020 = MANIFOLD_SOLID_BREP('',#358021); +#358021 = CLOSED_SHELL('',(#358022,#358055,#358075,#358095)); +#358022 = ADVANCED_FACE('',(#358023),#358050,.T.); +#358023 = FACE_BOUND('',#358024,.T.); +#358024 = EDGE_LOOP('',(#358025,#358035,#358042,#358043)); +#358025 = ORIENTED_EDGE('',*,*,#358026,.T.); +#358026 = EDGE_CURVE('',#358027,#358029,#358031,.T.); +#358027 = VERTEX_POINT('',#358028); +#358028 = CARTESIAN_POINT('',(136.7155,-149.5,0.)); +#358029 = VERTEX_POINT('',#358030); +#358030 = CARTESIAN_POINT('',(136.7155,-149.5,-4.E-02)); +#358031 = LINE('',#358032,#358033); +#358032 = CARTESIAN_POINT('',(136.7155,-149.5,0.)); +#358033 = VECTOR('',#358034,1.); +#358034 = DIRECTION('',(0.,0.,-1.)); +#358035 = ORIENTED_EDGE('',*,*,#358036,.T.); +#358036 = EDGE_CURVE('',#358029,#358029,#358037,.T.); +#358037 = CIRCLE('',#358038,0.7155); +#358038 = AXIS2_PLACEMENT_3D('',#358039,#358040,#358041); +#358039 = CARTESIAN_POINT('',(136.,-149.5,-4.E-02)); +#358040 = DIRECTION('',(0.,0.,1.)); +#358041 = DIRECTION('',(1.,0.,-0.)); +#358042 = ORIENTED_EDGE('',*,*,#358026,.F.); +#358043 = ORIENTED_EDGE('',*,*,#358044,.F.); +#358044 = EDGE_CURVE('',#358027,#358027,#358045,.T.); +#358045 = CIRCLE('',#358046,0.7155); +#358046 = AXIS2_PLACEMENT_3D('',#358047,#358048,#358049); +#358047 = CARTESIAN_POINT('',(136.,-149.5,0.)); +#358048 = DIRECTION('',(0.,0.,1.)); +#358049 = DIRECTION('',(1.,0.,-0.)); +#358050 = CYLINDRICAL_SURFACE('',#358051,0.7155); +#358051 = AXIS2_PLACEMENT_3D('',#358052,#358053,#358054); +#358052 = CARTESIAN_POINT('',(136.,-149.5,0.)); +#358053 = DIRECTION('',(0.,0.,1.)); +#358054 = DIRECTION('',(1.,0.,-0.)); +#358055 = ADVANCED_FACE('',(#358056,#358059),#358070,.F.); +#358056 = FACE_BOUND('',#358057,.F.); +#358057 = EDGE_LOOP('',(#358058)); +#358058 = ORIENTED_EDGE('',*,*,#358044,.F.); +#358059 = FACE_BOUND('',#358060,.F.); +#358060 = EDGE_LOOP('',(#358061)); +#358061 = ORIENTED_EDGE('',*,*,#358062,.F.); +#358062 = EDGE_CURVE('',#358063,#358063,#358065,.T.); +#358063 = VERTEX_POINT('',#358064); +#358064 = CARTESIAN_POINT('',(136.,-149.935,0.)); +#358065 = CIRCLE('',#358066,0.435); +#358066 = AXIS2_PLACEMENT_3D('',#358067,#358068,#358069); +#358067 = CARTESIAN_POINT('',(136.,-149.5,0.)); +#358068 = DIRECTION('',(-0.,0.,-1.)); +#358069 = DIRECTION('',(-0.,-1.,0.)); +#358070 = PLANE('',#358071); +#358071 = AXIS2_PLACEMENT_3D('',#358072,#358073,#358074); +#358072 = CARTESIAN_POINT('',(0.,0.,0.)); +#358073 = DIRECTION('',(-0.,-0.,-1.)); +#358074 = DIRECTION('',(-1.,0.,0.)); +#358075 = ADVANCED_FACE('',(#358076,#358079),#358090,.T.); +#358076 = FACE_BOUND('',#358077,.T.); +#358077 = EDGE_LOOP('',(#358078)); +#358078 = ORIENTED_EDGE('',*,*,#358036,.F.); +#358079 = FACE_BOUND('',#358080,.T.); +#358080 = EDGE_LOOP('',(#358081)); +#358081 = ORIENTED_EDGE('',*,*,#358082,.F.); +#358082 = EDGE_CURVE('',#358083,#358083,#358085,.T.); +#358083 = VERTEX_POINT('',#358084); +#358084 = CARTESIAN_POINT('',(136.,-149.935,-4.E-02)); +#358085 = CIRCLE('',#358086,0.435); +#358086 = AXIS2_PLACEMENT_3D('',#358087,#358088,#358089); +#358087 = CARTESIAN_POINT('',(136.,-149.5,-4.E-02)); +#358088 = DIRECTION('',(-0.,0.,-1.)); +#358089 = DIRECTION('',(-0.,-1.,0.)); +#358090 = PLANE('',#358091); +#358091 = AXIS2_PLACEMENT_3D('',#358092,#358093,#358094); +#358092 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#358093 = DIRECTION('',(-0.,-0.,-1.)); +#358094 = DIRECTION('',(-1.,0.,0.)); +#358095 = ADVANCED_FACE('',(#358096),#358107,.F.); +#358096 = FACE_BOUND('',#358097,.T.); +#358097 = EDGE_LOOP('',(#358098,#358099,#358105,#358106)); +#358098 = ORIENTED_EDGE('',*,*,#358082,.T.); +#358099 = ORIENTED_EDGE('',*,*,#358100,.T.); +#358100 = EDGE_CURVE('',#358083,#358063,#358101,.T.); +#358101 = LINE('',#358102,#358103); +#358102 = CARTESIAN_POINT('',(136.,-149.935,-4.6E-02)); +#358103 = VECTOR('',#358104,1.); +#358104 = DIRECTION('',(0.,0.,1.)); +#358105 = ORIENTED_EDGE('',*,*,#358062,.F.); +#358106 = ORIENTED_EDGE('',*,*,#358100,.F.); +#358107 = CYLINDRICAL_SURFACE('',#358108,0.435); +#358108 = AXIS2_PLACEMENT_3D('',#358109,#358110,#358111); +#358109 = CARTESIAN_POINT('',(136.,-149.5,-4.6E-02)); +#358110 = DIRECTION('',(-0.,-0.,-1.)); +#358111 = DIRECTION('',(-0.,-1.,0.)); +#358112 = MANIFOLD_SOLID_BREP('',#358113); +#358113 = CLOSED_SHELL('',(#358114,#358147,#358167,#358187)); +#358114 = ADVANCED_FACE('',(#358115),#358142,.T.); +#358115 = FACE_BOUND('',#358116,.F.); +#358116 = EDGE_LOOP('',(#358117,#358127,#358134,#358135)); +#358117 = ORIENTED_EDGE('',*,*,#358118,.T.); +#358118 = EDGE_CURVE('',#358119,#358121,#358123,.T.); +#358119 = VERTEX_POINT('',#358120); +#358120 = CARTESIAN_POINT('',(136.,-149.96,-4.E-02)); +#358121 = VERTEX_POINT('',#358122); +#358122 = CARTESIAN_POINT('',(136.,-149.96,1.55)); +#358123 = LINE('',#358124,#358125); +#358124 = CARTESIAN_POINT('',(136.,-149.96,-4.E-02)); +#358125 = VECTOR('',#358126,1.); +#358126 = DIRECTION('',(0.,0.,1.)); +#358127 = ORIENTED_EDGE('',*,*,#358128,.T.); +#358128 = EDGE_CURVE('',#358121,#358121,#358129,.T.); +#358129 = CIRCLE('',#358130,0.46); +#358130 = AXIS2_PLACEMENT_3D('',#358131,#358132,#358133); +#358131 = CARTESIAN_POINT('',(136.,-149.5,1.55)); +#358132 = DIRECTION('',(0.,0.,1.)); +#358133 = DIRECTION('',(-0.,-1.,0.)); +#358134 = ORIENTED_EDGE('',*,*,#358118,.F.); +#358135 = ORIENTED_EDGE('',*,*,#358136,.F.); +#358136 = EDGE_CURVE('',#358119,#358119,#358137,.T.); +#358137 = CIRCLE('',#358138,0.46); +#358138 = AXIS2_PLACEMENT_3D('',#358139,#358140,#358141); +#358139 = CARTESIAN_POINT('',(136.,-149.5,-4.E-02)); +#358140 = DIRECTION('',(0.,0.,1.)); +#358141 = DIRECTION('',(-0.,-1.,0.)); +#358142 = CYLINDRICAL_SURFACE('',#358143,0.46); +#358143 = AXIS2_PLACEMENT_3D('',#358144,#358145,#358146); +#358144 = CARTESIAN_POINT('',(136.,-149.5,-4.E-02)); +#358145 = DIRECTION('',(-0.,-0.,-1.)); +#358146 = DIRECTION('',(-0.,-1.,0.)); +#358147 = ADVANCED_FACE('',(#358148,#358151),#358162,.F.); +#358148 = FACE_BOUND('',#358149,.F.); +#358149 = EDGE_LOOP('',(#358150)); +#358150 = ORIENTED_EDGE('',*,*,#358136,.T.); +#358151 = FACE_BOUND('',#358152,.F.); +#358152 = EDGE_LOOP('',(#358153)); +#358153 = ORIENTED_EDGE('',*,*,#358154,.T.); +#358154 = EDGE_CURVE('',#358155,#358155,#358157,.T.); +#358155 = VERTEX_POINT('',#358156); +#358156 = CARTESIAN_POINT('',(136.,-149.935,-4.E-02)); +#358157 = CIRCLE('',#358158,0.435); +#358158 = AXIS2_PLACEMENT_3D('',#358159,#358160,#358161); +#358159 = CARTESIAN_POINT('',(136.,-149.5,-4.E-02)); +#358160 = DIRECTION('',(-0.,0.,-1.)); +#358161 = DIRECTION('',(-0.,-1.,0.)); +#358162 = PLANE('',#358163); +#358163 = AXIS2_PLACEMENT_3D('',#358164,#358165,#358166); +#358164 = CARTESIAN_POINT('',(136.,-149.96,-4.E-02)); +#358165 = DIRECTION('',(0.,0.,1.)); +#358166 = DIRECTION('',(1.,0.,-0.)); +#358167 = ADVANCED_FACE('',(#358168,#358171),#358182,.T.); +#358168 = FACE_BOUND('',#358169,.T.); +#358169 = EDGE_LOOP('',(#358170)); +#358170 = ORIENTED_EDGE('',*,*,#358128,.T.); +#358171 = FACE_BOUND('',#358172,.T.); +#358172 = EDGE_LOOP('',(#358173)); +#358173 = ORIENTED_EDGE('',*,*,#358174,.T.); +#358174 = EDGE_CURVE('',#358175,#358175,#358177,.T.); +#358175 = VERTEX_POINT('',#358176); +#358176 = CARTESIAN_POINT('',(136.,-149.935,1.55)); +#358177 = CIRCLE('',#358178,0.435); +#358178 = AXIS2_PLACEMENT_3D('',#358179,#358180,#358181); +#358179 = CARTESIAN_POINT('',(136.,-149.5,1.55)); +#358180 = DIRECTION('',(-0.,0.,-1.)); +#358181 = DIRECTION('',(-0.,-1.,0.)); +#358182 = PLANE('',#358183); +#358183 = AXIS2_PLACEMENT_3D('',#358184,#358185,#358186); +#358184 = CARTESIAN_POINT('',(136.,-149.96,1.55)); +#358185 = DIRECTION('',(0.,0.,1.)); +#358186 = DIRECTION('',(1.,0.,-0.)); +#358187 = ADVANCED_FACE('',(#358188),#358199,.F.); +#358188 = FACE_BOUND('',#358189,.T.); +#358189 = EDGE_LOOP('',(#358190,#358191,#358197,#358198)); +#358190 = ORIENTED_EDGE('',*,*,#358154,.T.); +#358191 = ORIENTED_EDGE('',*,*,#358192,.T.); +#358192 = EDGE_CURVE('',#358155,#358175,#358193,.T.); +#358193 = LINE('',#358194,#358195); +#358194 = CARTESIAN_POINT('',(136.,-149.935,-4.6E-02)); +#358195 = VECTOR('',#358196,1.); +#358196 = DIRECTION('',(0.,0.,1.)); +#358197 = ORIENTED_EDGE('',*,*,#358174,.F.); +#358198 = ORIENTED_EDGE('',*,*,#358192,.F.); +#358199 = CYLINDRICAL_SURFACE('',#358200,0.435); +#358200 = AXIS2_PLACEMENT_3D('',#358201,#358202,#358203); +#358201 = CARTESIAN_POINT('',(136.,-149.5,-4.6E-02)); +#358202 = DIRECTION('',(-0.,-0.,-1.)); +#358203 = DIRECTION('',(-0.,-1.,0.)); +#358204 = MANIFOLD_SOLID_BREP('',#358205); +#358205 = CLOSED_SHELL('',(#358206,#358246,#358277,#358308,#358330, + #358342)); +#358206 = ADVANCED_FACE('',(#358207),#358241,.T.); +#358207 = FACE_BOUND('',#358208,.T.); +#358208 = EDGE_LOOP('',(#358209,#358219,#358227,#358235)); +#358209 = ORIENTED_EDGE('',*,*,#358210,.T.); +#358210 = EDGE_CURVE('',#358211,#358213,#358215,.T.); +#358211 = VERTEX_POINT('',#358212); +#358212 = CARTESIAN_POINT('',(138.185,-83.16,1.51)); +#358213 = VERTEX_POINT('',#358214); +#358214 = CARTESIAN_POINT('',(138.185,-83.16,1.55)); +#358215 = LINE('',#358216,#358217); +#358216 = CARTESIAN_POINT('',(138.185,-83.16,1.51)); +#358217 = VECTOR('',#358218,1.); +#358218 = DIRECTION('',(0.,0.,1.)); +#358219 = ORIENTED_EDGE('',*,*,#358220,.T.); +#358220 = EDGE_CURVE('',#358213,#358221,#358223,.T.); +#358221 = VERTEX_POINT('',#358222); +#358222 = CARTESIAN_POINT('',(138.185,-81.66,1.55)); +#358223 = LINE('',#358224,#358225); +#358224 = CARTESIAN_POINT('',(138.185,-83.16,1.55)); +#358225 = VECTOR('',#358226,1.); +#358226 = DIRECTION('',(0.,1.,0.)); +#358227 = ORIENTED_EDGE('',*,*,#358228,.F.); +#358228 = EDGE_CURVE('',#358229,#358221,#358231,.T.); +#358229 = VERTEX_POINT('',#358230); +#358230 = CARTESIAN_POINT('',(138.185,-81.66,1.51)); +#358231 = LINE('',#358232,#358233); +#358232 = CARTESIAN_POINT('',(138.185,-81.66,1.51)); +#358233 = VECTOR('',#358234,1.); +#358234 = DIRECTION('',(0.,0.,1.)); +#358235 = ORIENTED_EDGE('',*,*,#358236,.F.); +#358236 = EDGE_CURVE('',#358211,#358229,#358237,.T.); +#358237 = LINE('',#358238,#358239); +#358238 = CARTESIAN_POINT('',(138.185,-83.16,1.51)); +#358239 = VECTOR('',#358240,1.); +#358240 = DIRECTION('',(0.,1.,0.)); +#358241 = PLANE('',#358242); +#358242 = AXIS2_PLACEMENT_3D('',#358243,#358244,#358245); +#358243 = CARTESIAN_POINT('',(138.185,-83.16,1.51)); +#358244 = DIRECTION('',(-1.,0.,0.)); +#358245 = DIRECTION('',(0.,1.,0.)); +#358246 = ADVANCED_FACE('',(#358247),#358272,.T.); +#358247 = FACE_BOUND('',#358248,.T.); +#358248 = EDGE_LOOP('',(#358249,#358250,#358258,#358266)); +#358249 = ORIENTED_EDGE('',*,*,#358228,.T.); +#358250 = ORIENTED_EDGE('',*,*,#358251,.T.); +#358251 = EDGE_CURVE('',#358221,#358252,#358254,.T.); +#358252 = VERTEX_POINT('',#358253); +#358253 = CARTESIAN_POINT('',(139.085,-81.66,1.55)); +#358254 = LINE('',#358255,#358256); +#358255 = CARTESIAN_POINT('',(138.185,-81.66,1.55)); +#358256 = VECTOR('',#358257,1.); +#358257 = DIRECTION('',(1.,0.,0.)); +#358258 = ORIENTED_EDGE('',*,*,#358259,.F.); +#358259 = EDGE_CURVE('',#358260,#358252,#358262,.T.); +#358260 = VERTEX_POINT('',#358261); +#358261 = CARTESIAN_POINT('',(139.085,-81.66,1.51)); +#358262 = LINE('',#358263,#358264); +#358263 = CARTESIAN_POINT('',(139.085,-81.66,1.51)); +#358264 = VECTOR('',#358265,1.); +#358265 = DIRECTION('',(0.,0.,1.)); +#358266 = ORIENTED_EDGE('',*,*,#358267,.F.); +#358267 = EDGE_CURVE('',#358229,#358260,#358268,.T.); +#358268 = LINE('',#358269,#358270); +#358269 = CARTESIAN_POINT('',(138.185,-81.66,1.51)); +#358270 = VECTOR('',#358271,1.); +#358271 = DIRECTION('',(1.,0.,0.)); +#358272 = PLANE('',#358273); +#358273 = AXIS2_PLACEMENT_3D('',#358274,#358275,#358276); +#358274 = CARTESIAN_POINT('',(138.185,-81.66,1.51)); +#358275 = DIRECTION('',(0.,1.,0.)); +#358276 = DIRECTION('',(1.,0.,0.)); +#358277 = ADVANCED_FACE('',(#358278),#358303,.T.); +#358278 = FACE_BOUND('',#358279,.T.); +#358279 = EDGE_LOOP('',(#358280,#358281,#358289,#358297)); +#358280 = ORIENTED_EDGE('',*,*,#358259,.T.); +#358281 = ORIENTED_EDGE('',*,*,#358282,.T.); +#358282 = EDGE_CURVE('',#358252,#358283,#358285,.T.); +#358283 = VERTEX_POINT('',#358284); +#358284 = CARTESIAN_POINT('',(139.085,-83.16,1.55)); +#358285 = LINE('',#358286,#358287); +#358286 = CARTESIAN_POINT('',(139.085,-81.66,1.55)); +#358287 = VECTOR('',#358288,1.); +#358288 = DIRECTION('',(0.,-1.,0.)); +#358289 = ORIENTED_EDGE('',*,*,#358290,.F.); +#358290 = EDGE_CURVE('',#358291,#358283,#358293,.T.); +#358291 = VERTEX_POINT('',#358292); +#358292 = CARTESIAN_POINT('',(139.085,-83.16,1.51)); +#358293 = LINE('',#358294,#358295); +#358294 = CARTESIAN_POINT('',(139.085,-83.16,1.51)); +#358295 = VECTOR('',#358296,1.); +#358296 = DIRECTION('',(0.,0.,1.)); +#358297 = ORIENTED_EDGE('',*,*,#358298,.F.); +#358298 = EDGE_CURVE('',#358260,#358291,#358299,.T.); +#358299 = LINE('',#358300,#358301); +#358300 = CARTESIAN_POINT('',(139.085,-81.66,1.51)); +#358301 = VECTOR('',#358302,1.); +#358302 = DIRECTION('',(0.,-1.,0.)); +#358303 = PLANE('',#358304); +#358304 = AXIS2_PLACEMENT_3D('',#358305,#358306,#358307); +#358305 = CARTESIAN_POINT('',(139.085,-81.66,1.51)); +#358306 = DIRECTION('',(1.,0.,-0.)); +#358307 = DIRECTION('',(0.,-1.,0.)); +#358308 = ADVANCED_FACE('',(#358309),#358325,.T.); +#358309 = FACE_BOUND('',#358310,.T.); +#358310 = EDGE_LOOP('',(#358311,#358312,#358318,#358319)); +#358311 = ORIENTED_EDGE('',*,*,#358290,.T.); +#358312 = ORIENTED_EDGE('',*,*,#358313,.T.); +#358313 = EDGE_CURVE('',#358283,#358213,#358314,.T.); +#358314 = LINE('',#358315,#358316); +#358315 = CARTESIAN_POINT('',(139.085,-83.16,1.55)); +#358316 = VECTOR('',#358317,1.); +#358317 = DIRECTION('',(-1.,0.,0.)); +#358318 = ORIENTED_EDGE('',*,*,#358210,.F.); +#358319 = ORIENTED_EDGE('',*,*,#358320,.F.); +#358320 = EDGE_CURVE('',#358291,#358211,#358321,.T.); +#358321 = LINE('',#358322,#358323); +#358322 = CARTESIAN_POINT('',(139.085,-83.16,1.51)); +#358323 = VECTOR('',#358324,1.); +#358324 = DIRECTION('',(-1.,0.,0.)); +#358325 = PLANE('',#358326); +#358326 = AXIS2_PLACEMENT_3D('',#358327,#358328,#358329); +#358327 = CARTESIAN_POINT('',(139.085,-83.16,1.51)); +#358328 = DIRECTION('',(0.,-1.,0.)); +#358329 = DIRECTION('',(-1.,0.,0.)); +#358330 = ADVANCED_FACE('',(#358331),#358337,.F.); +#358331 = FACE_BOUND('',#358332,.T.); +#358332 = EDGE_LOOP('',(#358333,#358334,#358335,#358336)); +#358333 = ORIENTED_EDGE('',*,*,#358236,.T.); +#358334 = ORIENTED_EDGE('',*,*,#358267,.T.); +#358335 = ORIENTED_EDGE('',*,*,#358298,.T.); +#358336 = ORIENTED_EDGE('',*,*,#358320,.T.); +#358337 = PLANE('',#358338); +#358338 = AXIS2_PLACEMENT_3D('',#358339,#358340,#358341); +#358339 = CARTESIAN_POINT('',(0.,0.,1.51)); +#358340 = DIRECTION('',(0.,0.,1.)); +#358341 = DIRECTION('',(1.,0.,-0.)); +#358342 = ADVANCED_FACE('',(#358343),#358349,.T.); +#358343 = FACE_BOUND('',#358344,.F.); +#358344 = EDGE_LOOP('',(#358345,#358346,#358347,#358348)); +#358345 = ORIENTED_EDGE('',*,*,#358220,.T.); +#358346 = ORIENTED_EDGE('',*,*,#358251,.T.); +#358347 = ORIENTED_EDGE('',*,*,#358282,.T.); +#358348 = ORIENTED_EDGE('',*,*,#358313,.T.); +#358349 = PLANE('',#358350); +#358350 = AXIS2_PLACEMENT_3D('',#358351,#358352,#358353); +#358351 = CARTESIAN_POINT('',(0.,0.,1.55)); +#358352 = DIRECTION('',(0.,0.,1.)); +#358353 = DIRECTION('',(1.,0.,-0.)); +#358354 = MANIFOLD_SOLID_BREP('',#358355); +#358355 = CLOSED_SHELL('',(#358356,#358398,#358429,#358462,#358493, + #358526,#358557,#358590,#358612,#358628)); +#358356 = ADVANCED_FACE('',(#358357),#358393,.T.); +#358357 = FACE_BOUND('',#358358,.F.); +#358358 = EDGE_LOOP('',(#358359,#358369,#358378,#358386)); +#358359 = ORIENTED_EDGE('',*,*,#358360,.T.); +#358360 = EDGE_CURVE('',#358361,#358363,#358365,.T.); +#358361 = VERTEX_POINT('',#358362); +#358362 = CARTESIAN_POINT('',(122.205,-114.605,0.)); +#358363 = VERTEX_POINT('',#358364); +#358364 = CARTESIAN_POINT('',(122.205,-114.605,-4.E-02)); +#358365 = LINE('',#358366,#358367); +#358366 = CARTESIAN_POINT('',(122.205,-114.605,0.)); +#358367 = VECTOR('',#358368,1.); +#358368 = DIRECTION('',(0.,0.,-1.)); +#358369 = ORIENTED_EDGE('',*,*,#358370,.T.); +#358370 = EDGE_CURVE('',#358363,#358371,#358373,.T.); +#358371 = VERTEX_POINT('',#358372); +#358372 = CARTESIAN_POINT('',(122.34,-114.47,-4.E-02)); +#358373 = CIRCLE('',#358374,0.135001418495); +#358374 = AXIS2_PLACEMENT_3D('',#358375,#358376,#358377); +#358375 = CARTESIAN_POINT('',(122.34000141848,-114.6050014184,-4.E-02)); +#358376 = DIRECTION('',(0.,0.,-1.)); +#358377 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#358378 = ORIENTED_EDGE('',*,*,#358379,.F.); +#358379 = EDGE_CURVE('',#358380,#358371,#358382,.T.); +#358380 = VERTEX_POINT('',#358381); +#358381 = CARTESIAN_POINT('',(122.34,-114.47,0.)); +#358382 = LINE('',#358383,#358384); +#358383 = CARTESIAN_POINT('',(122.34,-114.47,0.)); +#358384 = VECTOR('',#358385,1.); +#358385 = DIRECTION('',(0.,0.,-1.)); +#358386 = ORIENTED_EDGE('',*,*,#358387,.F.); +#358387 = EDGE_CURVE('',#358361,#358380,#358388,.T.); +#358388 = CIRCLE('',#358389,0.135001418495); +#358389 = AXIS2_PLACEMENT_3D('',#358390,#358391,#358392); +#358390 = CARTESIAN_POINT('',(122.34000141848,-114.6050014184,0.)); +#358391 = DIRECTION('',(0.,0.,-1.)); +#358392 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#358393 = CYLINDRICAL_SURFACE('',#358394,0.135001418495); +#358394 = AXIS2_PLACEMENT_3D('',#358395,#358396,#358397); +#358395 = CARTESIAN_POINT('',(122.34000141848,-114.6050014184,0.)); +#358396 = DIRECTION('',(-0.,-0.,1.)); +#358397 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#358398 = ADVANCED_FACE('',(#358399),#358424,.F.); +#358399 = FACE_BOUND('',#358400,.F.); +#358400 = EDGE_LOOP('',(#358401,#358402,#358410,#358418)); +#358401 = ORIENTED_EDGE('',*,*,#358379,.T.); +#358402 = ORIENTED_EDGE('',*,*,#358403,.T.); +#358403 = EDGE_CURVE('',#358371,#358404,#358406,.T.); +#358404 = VERTEX_POINT('',#358405); +#358405 = CARTESIAN_POINT('',(122.71,-114.47,-4.E-02)); +#358406 = LINE('',#358407,#358408); +#358407 = CARTESIAN_POINT('',(122.34,-114.47,-4.E-02)); +#358408 = VECTOR('',#358409,1.); +#358409 = DIRECTION('',(1.,0.,0.)); +#358410 = ORIENTED_EDGE('',*,*,#358411,.F.); +#358411 = EDGE_CURVE('',#358412,#358404,#358414,.T.); +#358412 = VERTEX_POINT('',#358413); +#358413 = CARTESIAN_POINT('',(122.71,-114.47,0.)); +#358414 = LINE('',#358415,#358416); +#358415 = CARTESIAN_POINT('',(122.71,-114.47,0.)); +#358416 = VECTOR('',#358417,1.); +#358417 = DIRECTION('',(0.,0.,-1.)); +#358418 = ORIENTED_EDGE('',*,*,#358419,.F.); +#358419 = EDGE_CURVE('',#358380,#358412,#358420,.T.); +#358420 = LINE('',#358421,#358422); +#358421 = CARTESIAN_POINT('',(122.34,-114.47,0.)); +#358422 = VECTOR('',#358423,1.); +#358423 = DIRECTION('',(1.,0.,0.)); +#358424 = PLANE('',#358425); +#358425 = AXIS2_PLACEMENT_3D('',#358426,#358427,#358428); +#358426 = CARTESIAN_POINT('',(122.34,-114.47,0.)); +#358427 = DIRECTION('',(0.,-1.,0.)); +#358428 = DIRECTION('',(1.,0.,0.)); +#358429 = ADVANCED_FACE('',(#358430),#358457,.T.); +#358430 = FACE_BOUND('',#358431,.F.); +#358431 = EDGE_LOOP('',(#358432,#358433,#358442,#358450)); +#358432 = ORIENTED_EDGE('',*,*,#358411,.T.); +#358433 = ORIENTED_EDGE('',*,*,#358434,.T.); +#358434 = EDGE_CURVE('',#358404,#358435,#358437,.T.); +#358435 = VERTEX_POINT('',#358436); +#358436 = CARTESIAN_POINT('',(122.845,-114.605,-4.E-02)); +#358437 = CIRCLE('',#358438,0.135001418495); +#358438 = AXIS2_PLACEMENT_3D('',#358439,#358440,#358441); +#358439 = CARTESIAN_POINT('',(122.70999858151,-114.6050014184,-4.E-02)); +#358440 = DIRECTION('',(0.,0.,-1.)); +#358441 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358442 = ORIENTED_EDGE('',*,*,#358443,.F.); +#358443 = EDGE_CURVE('',#358444,#358435,#358446,.T.); +#358444 = VERTEX_POINT('',#358445); +#358445 = CARTESIAN_POINT('',(122.845,-114.605,0.)); +#358446 = LINE('',#358447,#358448); +#358447 = CARTESIAN_POINT('',(122.845,-114.605,0.)); +#358448 = VECTOR('',#358449,1.); +#358449 = DIRECTION('',(0.,0.,-1.)); +#358450 = ORIENTED_EDGE('',*,*,#358451,.F.); +#358451 = EDGE_CURVE('',#358412,#358444,#358452,.T.); +#358452 = CIRCLE('',#358453,0.135001418495); +#358453 = AXIS2_PLACEMENT_3D('',#358454,#358455,#358456); +#358454 = CARTESIAN_POINT('',(122.70999858151,-114.6050014184,0.)); +#358455 = DIRECTION('',(0.,0.,-1.)); +#358456 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358457 = CYLINDRICAL_SURFACE('',#358458,0.135001418495); +#358458 = AXIS2_PLACEMENT_3D('',#358459,#358460,#358461); +#358459 = CARTESIAN_POINT('',(122.70999858151,-114.6050014184,0.)); +#358460 = DIRECTION('',(-0.,-0.,1.)); +#358461 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358462 = ADVANCED_FACE('',(#358463),#358488,.F.); +#358463 = FACE_BOUND('',#358464,.F.); +#358464 = EDGE_LOOP('',(#358465,#358466,#358474,#358482)); +#358465 = ORIENTED_EDGE('',*,*,#358443,.T.); +#358466 = ORIENTED_EDGE('',*,*,#358467,.T.); +#358467 = EDGE_CURVE('',#358435,#358468,#358470,.T.); +#358468 = VERTEX_POINT('',#358469); +#358469 = CARTESIAN_POINT('',(122.845,-114.875,-4.E-02)); +#358470 = LINE('',#358471,#358472); +#358471 = CARTESIAN_POINT('',(122.845,-114.605,-4.E-02)); +#358472 = VECTOR('',#358473,1.); +#358473 = DIRECTION('',(0.,-1.,0.)); +#358474 = ORIENTED_EDGE('',*,*,#358475,.F.); +#358475 = EDGE_CURVE('',#358476,#358468,#358478,.T.); +#358476 = VERTEX_POINT('',#358477); +#358477 = CARTESIAN_POINT('',(122.845,-114.875,0.)); +#358478 = LINE('',#358479,#358480); +#358479 = CARTESIAN_POINT('',(122.845,-114.875,0.)); +#358480 = VECTOR('',#358481,1.); +#358481 = DIRECTION('',(0.,0.,-1.)); +#358482 = ORIENTED_EDGE('',*,*,#358483,.F.); +#358483 = EDGE_CURVE('',#358444,#358476,#358484,.T.); +#358484 = LINE('',#358485,#358486); +#358485 = CARTESIAN_POINT('',(122.845,-114.605,0.)); +#358486 = VECTOR('',#358487,1.); +#358487 = DIRECTION('',(0.,-1.,0.)); +#358488 = PLANE('',#358489); +#358489 = AXIS2_PLACEMENT_3D('',#358490,#358491,#358492); +#358490 = CARTESIAN_POINT('',(122.845,-114.605,0.)); +#358491 = DIRECTION('',(-1.,-0.,-0.)); +#358492 = DIRECTION('',(0.,-1.,0.)); +#358493 = ADVANCED_FACE('',(#358494),#358521,.T.); +#358494 = FACE_BOUND('',#358495,.F.); +#358495 = EDGE_LOOP('',(#358496,#358497,#358506,#358514)); +#358496 = ORIENTED_EDGE('',*,*,#358475,.T.); +#358497 = ORIENTED_EDGE('',*,*,#358498,.T.); +#358498 = EDGE_CURVE('',#358468,#358499,#358501,.T.); +#358499 = VERTEX_POINT('',#358500); +#358500 = CARTESIAN_POINT('',(122.71,-115.01,-4.E-02)); +#358501 = CIRCLE('',#358502,0.135001418495); +#358502 = AXIS2_PLACEMENT_3D('',#358503,#358504,#358505); +#358503 = CARTESIAN_POINT('',(122.70999858151,-114.8749985815,-4.E-02)); +#358504 = DIRECTION('',(0.,0.,-1.)); +#358505 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358506 = ORIENTED_EDGE('',*,*,#358507,.F.); +#358507 = EDGE_CURVE('',#358508,#358499,#358510,.T.); +#358508 = VERTEX_POINT('',#358509); +#358509 = CARTESIAN_POINT('',(122.71,-115.01,0.)); +#358510 = LINE('',#358511,#358512); +#358511 = CARTESIAN_POINT('',(122.71,-115.01,0.)); +#358512 = VECTOR('',#358513,1.); +#358513 = DIRECTION('',(0.,0.,-1.)); +#358514 = ORIENTED_EDGE('',*,*,#358515,.F.); +#358515 = EDGE_CURVE('',#358476,#358508,#358516,.T.); +#358516 = CIRCLE('',#358517,0.135001418495); +#358517 = AXIS2_PLACEMENT_3D('',#358518,#358519,#358520); +#358518 = CARTESIAN_POINT('',(122.70999858151,-114.8749985815,0.)); +#358519 = DIRECTION('',(0.,0.,-1.)); +#358520 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358521 = CYLINDRICAL_SURFACE('',#358522,0.135001418495); +#358522 = AXIS2_PLACEMENT_3D('',#358523,#358524,#358525); +#358523 = CARTESIAN_POINT('',(122.70999858151,-114.8749985815,0.)); +#358524 = DIRECTION('',(-0.,-0.,1.)); +#358525 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358526 = ADVANCED_FACE('',(#358527),#358552,.F.); +#358527 = FACE_BOUND('',#358528,.F.); +#358528 = EDGE_LOOP('',(#358529,#358530,#358538,#358546)); +#358529 = ORIENTED_EDGE('',*,*,#358507,.T.); +#358530 = ORIENTED_EDGE('',*,*,#358531,.T.); +#358531 = EDGE_CURVE('',#358499,#358532,#358534,.T.); +#358532 = VERTEX_POINT('',#358533); +#358533 = CARTESIAN_POINT('',(122.34,-115.01,-4.E-02)); +#358534 = LINE('',#358535,#358536); +#358535 = CARTESIAN_POINT('',(122.71,-115.01,-4.E-02)); +#358536 = VECTOR('',#358537,1.); +#358537 = DIRECTION('',(-1.,0.,0.)); +#358538 = ORIENTED_EDGE('',*,*,#358539,.F.); +#358539 = EDGE_CURVE('',#358540,#358532,#358542,.T.); +#358540 = VERTEX_POINT('',#358541); +#358541 = CARTESIAN_POINT('',(122.34,-115.01,0.)); +#358542 = LINE('',#358543,#358544); +#358543 = CARTESIAN_POINT('',(122.34,-115.01,0.)); +#358544 = VECTOR('',#358545,1.); +#358545 = DIRECTION('',(0.,0.,-1.)); +#358546 = ORIENTED_EDGE('',*,*,#358547,.F.); +#358547 = EDGE_CURVE('',#358508,#358540,#358548,.T.); +#358548 = LINE('',#358549,#358550); +#358549 = CARTESIAN_POINT('',(122.71,-115.01,0.)); +#358550 = VECTOR('',#358551,1.); +#358551 = DIRECTION('',(-1.,0.,0.)); +#358552 = PLANE('',#358553); +#358553 = AXIS2_PLACEMENT_3D('',#358554,#358555,#358556); +#358554 = CARTESIAN_POINT('',(122.71,-115.01,0.)); +#358555 = DIRECTION('',(0.,1.,0.)); +#358556 = DIRECTION('',(-1.,0.,0.)); +#358557 = ADVANCED_FACE('',(#358558),#358585,.T.); +#358558 = FACE_BOUND('',#358559,.F.); +#358559 = EDGE_LOOP('',(#358560,#358561,#358570,#358578)); +#358560 = ORIENTED_EDGE('',*,*,#358539,.T.); +#358561 = ORIENTED_EDGE('',*,*,#358562,.T.); +#358562 = EDGE_CURVE('',#358532,#358563,#358565,.T.); +#358563 = VERTEX_POINT('',#358564); +#358564 = CARTESIAN_POINT('',(122.205,-114.875,-4.E-02)); +#358565 = CIRCLE('',#358566,0.135001418495); +#358566 = AXIS2_PLACEMENT_3D('',#358567,#358568,#358569); +#358567 = CARTESIAN_POINT('',(122.34000141848,-114.8749985815,-4.E-02)); +#358568 = DIRECTION('',(0.,0.,-1.)); +#358569 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#358570 = ORIENTED_EDGE('',*,*,#358571,.F.); +#358571 = EDGE_CURVE('',#358572,#358563,#358574,.T.); +#358572 = VERTEX_POINT('',#358573); +#358573 = CARTESIAN_POINT('',(122.205,-114.875,0.)); +#358574 = LINE('',#358575,#358576); +#358575 = CARTESIAN_POINT('',(122.205,-114.875,0.)); +#358576 = VECTOR('',#358577,1.); +#358577 = DIRECTION('',(0.,0.,-1.)); +#358578 = ORIENTED_EDGE('',*,*,#358579,.F.); +#358579 = EDGE_CURVE('',#358540,#358572,#358580,.T.); +#358580 = CIRCLE('',#358581,0.135001418495); +#358581 = AXIS2_PLACEMENT_3D('',#358582,#358583,#358584); +#358582 = CARTESIAN_POINT('',(122.34000141848,-114.8749985815,0.)); +#358583 = DIRECTION('',(0.,0.,-1.)); +#358584 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#358585 = CYLINDRICAL_SURFACE('',#358586,0.135001418495); +#358586 = AXIS2_PLACEMENT_3D('',#358587,#358588,#358589); +#358587 = CARTESIAN_POINT('',(122.34000141848,-114.8749985815,0.)); +#358588 = DIRECTION('',(-0.,-0.,1.)); +#358589 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#358590 = ADVANCED_FACE('',(#358591),#358607,.F.); +#358591 = FACE_BOUND('',#358592,.F.); +#358592 = EDGE_LOOP('',(#358593,#358594,#358600,#358601)); +#358593 = ORIENTED_EDGE('',*,*,#358571,.T.); +#358594 = ORIENTED_EDGE('',*,*,#358595,.T.); +#358595 = EDGE_CURVE('',#358563,#358363,#358596,.T.); +#358596 = LINE('',#358597,#358598); +#358597 = CARTESIAN_POINT('',(122.205,-114.875,-4.E-02)); +#358598 = VECTOR('',#358599,1.); +#358599 = DIRECTION('',(0.,1.,0.)); +#358600 = ORIENTED_EDGE('',*,*,#358360,.F.); +#358601 = ORIENTED_EDGE('',*,*,#358602,.F.); +#358602 = EDGE_CURVE('',#358572,#358361,#358603,.T.); +#358603 = LINE('',#358604,#358605); +#358604 = CARTESIAN_POINT('',(122.205,-114.875,0.)); +#358605 = VECTOR('',#358606,1.); +#358606 = DIRECTION('',(0.,1.,0.)); +#358607 = PLANE('',#358608); +#358608 = AXIS2_PLACEMENT_3D('',#358609,#358610,#358611); +#358609 = CARTESIAN_POINT('',(122.205,-114.875,0.)); +#358610 = DIRECTION('',(1.,-0.,0.)); +#358611 = DIRECTION('',(0.,1.,0.)); +#358612 = ADVANCED_FACE('',(#358613),#358623,.F.); +#358613 = FACE_BOUND('',#358614,.F.); +#358614 = EDGE_LOOP('',(#358615,#358616,#358617,#358618,#358619,#358620, + #358621,#358622)); +#358615 = ORIENTED_EDGE('',*,*,#358387,.T.); +#358616 = ORIENTED_EDGE('',*,*,#358419,.T.); +#358617 = ORIENTED_EDGE('',*,*,#358451,.T.); +#358618 = ORIENTED_EDGE('',*,*,#358483,.T.); +#358619 = ORIENTED_EDGE('',*,*,#358515,.T.); +#358620 = ORIENTED_EDGE('',*,*,#358547,.T.); +#358621 = ORIENTED_EDGE('',*,*,#358579,.T.); +#358622 = ORIENTED_EDGE('',*,*,#358602,.T.); +#358623 = PLANE('',#358624); +#358624 = AXIS2_PLACEMENT_3D('',#358625,#358626,#358627); +#358625 = CARTESIAN_POINT('',(0.,0.,0.)); +#358626 = DIRECTION('',(-0.,-0.,-1.)); +#358627 = DIRECTION('',(-1.,0.,0.)); +#358628 = ADVANCED_FACE('',(#358629),#358639,.T.); +#358629 = FACE_BOUND('',#358630,.T.); +#358630 = EDGE_LOOP('',(#358631,#358632,#358633,#358634,#358635,#358636, + #358637,#358638)); +#358631 = ORIENTED_EDGE('',*,*,#358370,.T.); +#358632 = ORIENTED_EDGE('',*,*,#358403,.T.); +#358633 = ORIENTED_EDGE('',*,*,#358434,.T.); +#358634 = ORIENTED_EDGE('',*,*,#358467,.T.); +#358635 = ORIENTED_EDGE('',*,*,#358498,.T.); +#358636 = ORIENTED_EDGE('',*,*,#358531,.T.); +#358637 = ORIENTED_EDGE('',*,*,#358562,.T.); +#358638 = ORIENTED_EDGE('',*,*,#358595,.T.); +#358639 = PLANE('',#358640); +#358640 = AXIS2_PLACEMENT_3D('',#358641,#358642,#358643); +#358641 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#358642 = DIRECTION('',(-0.,-0.,-1.)); +#358643 = DIRECTION('',(-1.,0.,0.)); +#358644 = MANIFOLD_SOLID_BREP('',#358645); +#358645 = CLOSED_SHELL('',(#358646,#358688,#358719,#358752,#358783, + #358816,#358847,#358880,#358902,#358918)); +#358646 = ADVANCED_FACE('',(#358647),#358683,.T.); +#358647 = FACE_BOUND('',#358648,.F.); +#358648 = EDGE_LOOP('',(#358649,#358659,#358668,#358676)); +#358649 = ORIENTED_EDGE('',*,*,#358650,.T.); +#358650 = EDGE_CURVE('',#358651,#358653,#358655,.T.); +#358651 = VERTEX_POINT('',#358652); +#358652 = CARTESIAN_POINT('',(122.205,-113.625,0.)); +#358653 = VERTEX_POINT('',#358654); +#358654 = CARTESIAN_POINT('',(122.205,-113.625,-4.E-02)); +#358655 = LINE('',#358656,#358657); +#358656 = CARTESIAN_POINT('',(122.205,-113.625,0.)); +#358657 = VECTOR('',#358658,1.); +#358658 = DIRECTION('',(0.,0.,-1.)); +#358659 = ORIENTED_EDGE('',*,*,#358660,.T.); +#358660 = EDGE_CURVE('',#358653,#358661,#358663,.T.); +#358661 = VERTEX_POINT('',#358662); +#358662 = CARTESIAN_POINT('',(122.34,-113.49,-4.E-02)); +#358663 = CIRCLE('',#358664,0.135001418495); +#358664 = AXIS2_PLACEMENT_3D('',#358665,#358666,#358667); +#358665 = CARTESIAN_POINT('',(122.34000141848,-113.6250014184,-4.E-02)); +#358666 = DIRECTION('',(0.,0.,-1.)); +#358667 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#358668 = ORIENTED_EDGE('',*,*,#358669,.F.); +#358669 = EDGE_CURVE('',#358670,#358661,#358672,.T.); +#358670 = VERTEX_POINT('',#358671); +#358671 = CARTESIAN_POINT('',(122.34,-113.49,0.)); +#358672 = LINE('',#358673,#358674); +#358673 = CARTESIAN_POINT('',(122.34,-113.49,0.)); +#358674 = VECTOR('',#358675,1.); +#358675 = DIRECTION('',(0.,0.,-1.)); +#358676 = ORIENTED_EDGE('',*,*,#358677,.F.); +#358677 = EDGE_CURVE('',#358651,#358670,#358678,.T.); +#358678 = CIRCLE('',#358679,0.135001418495); +#358679 = AXIS2_PLACEMENT_3D('',#358680,#358681,#358682); +#358680 = CARTESIAN_POINT('',(122.34000141848,-113.6250014184,0.)); +#358681 = DIRECTION('',(0.,0.,-1.)); +#358682 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#358683 = CYLINDRICAL_SURFACE('',#358684,0.135001418495); +#358684 = AXIS2_PLACEMENT_3D('',#358685,#358686,#358687); +#358685 = CARTESIAN_POINT('',(122.34000141848,-113.6250014184,0.)); +#358686 = DIRECTION('',(-0.,-0.,1.)); +#358687 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#358688 = ADVANCED_FACE('',(#358689),#358714,.F.); +#358689 = FACE_BOUND('',#358690,.F.); +#358690 = EDGE_LOOP('',(#358691,#358692,#358700,#358708)); +#358691 = ORIENTED_EDGE('',*,*,#358669,.T.); +#358692 = ORIENTED_EDGE('',*,*,#358693,.T.); +#358693 = EDGE_CURVE('',#358661,#358694,#358696,.T.); +#358694 = VERTEX_POINT('',#358695); +#358695 = CARTESIAN_POINT('',(122.71,-113.49,-4.E-02)); +#358696 = LINE('',#358697,#358698); +#358697 = CARTESIAN_POINT('',(122.34,-113.49,-4.E-02)); +#358698 = VECTOR('',#358699,1.); +#358699 = DIRECTION('',(1.,0.,0.)); +#358700 = ORIENTED_EDGE('',*,*,#358701,.F.); +#358701 = EDGE_CURVE('',#358702,#358694,#358704,.T.); +#358702 = VERTEX_POINT('',#358703); +#358703 = CARTESIAN_POINT('',(122.71,-113.49,0.)); +#358704 = LINE('',#358705,#358706); +#358705 = CARTESIAN_POINT('',(122.71,-113.49,0.)); +#358706 = VECTOR('',#358707,1.); +#358707 = DIRECTION('',(0.,0.,-1.)); +#358708 = ORIENTED_EDGE('',*,*,#358709,.F.); +#358709 = EDGE_CURVE('',#358670,#358702,#358710,.T.); +#358710 = LINE('',#358711,#358712); +#358711 = CARTESIAN_POINT('',(122.34,-113.49,0.)); +#358712 = VECTOR('',#358713,1.); +#358713 = DIRECTION('',(1.,0.,0.)); +#358714 = PLANE('',#358715); +#358715 = AXIS2_PLACEMENT_3D('',#358716,#358717,#358718); +#358716 = CARTESIAN_POINT('',(122.34,-113.49,0.)); +#358717 = DIRECTION('',(0.,-1.,0.)); +#358718 = DIRECTION('',(1.,0.,0.)); +#358719 = ADVANCED_FACE('',(#358720),#358747,.T.); +#358720 = FACE_BOUND('',#358721,.F.); +#358721 = EDGE_LOOP('',(#358722,#358723,#358732,#358740)); +#358722 = ORIENTED_EDGE('',*,*,#358701,.T.); +#358723 = ORIENTED_EDGE('',*,*,#358724,.T.); +#358724 = EDGE_CURVE('',#358694,#358725,#358727,.T.); +#358725 = VERTEX_POINT('',#358726); +#358726 = CARTESIAN_POINT('',(122.845,-113.625,-4.E-02)); +#358727 = CIRCLE('',#358728,0.135001418495); +#358728 = AXIS2_PLACEMENT_3D('',#358729,#358730,#358731); +#358729 = CARTESIAN_POINT('',(122.70999858151,-113.6250014184,-4.E-02)); +#358730 = DIRECTION('',(0.,0.,-1.)); +#358731 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358732 = ORIENTED_EDGE('',*,*,#358733,.F.); +#358733 = EDGE_CURVE('',#358734,#358725,#358736,.T.); +#358734 = VERTEX_POINT('',#358735); +#358735 = CARTESIAN_POINT('',(122.845,-113.625,0.)); +#358736 = LINE('',#358737,#358738); +#358737 = CARTESIAN_POINT('',(122.845,-113.625,0.)); +#358738 = VECTOR('',#358739,1.); +#358739 = DIRECTION('',(0.,0.,-1.)); +#358740 = ORIENTED_EDGE('',*,*,#358741,.F.); +#358741 = EDGE_CURVE('',#358702,#358734,#358742,.T.); +#358742 = CIRCLE('',#358743,0.135001418495); +#358743 = AXIS2_PLACEMENT_3D('',#358744,#358745,#358746); +#358744 = CARTESIAN_POINT('',(122.70999858151,-113.6250014184,0.)); +#358745 = DIRECTION('',(0.,0.,-1.)); +#358746 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358747 = CYLINDRICAL_SURFACE('',#358748,0.135001418495); +#358748 = AXIS2_PLACEMENT_3D('',#358749,#358750,#358751); +#358749 = CARTESIAN_POINT('',(122.70999858151,-113.6250014184,0.)); +#358750 = DIRECTION('',(-0.,-0.,1.)); +#358751 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#358752 = ADVANCED_FACE('',(#358753),#358778,.F.); +#358753 = FACE_BOUND('',#358754,.F.); +#358754 = EDGE_LOOP('',(#358755,#358756,#358764,#358772)); +#358755 = ORIENTED_EDGE('',*,*,#358733,.T.); +#358756 = ORIENTED_EDGE('',*,*,#358757,.T.); +#358757 = EDGE_CURVE('',#358725,#358758,#358760,.T.); +#358758 = VERTEX_POINT('',#358759); +#358759 = CARTESIAN_POINT('',(122.845,-113.895,-4.E-02)); +#358760 = LINE('',#358761,#358762); +#358761 = CARTESIAN_POINT('',(122.845,-113.625,-4.E-02)); +#358762 = VECTOR('',#358763,1.); +#358763 = DIRECTION('',(0.,-1.,0.)); +#358764 = ORIENTED_EDGE('',*,*,#358765,.F.); +#358765 = EDGE_CURVE('',#358766,#358758,#358768,.T.); +#358766 = VERTEX_POINT('',#358767); +#358767 = CARTESIAN_POINT('',(122.845,-113.895,0.)); +#358768 = LINE('',#358769,#358770); +#358769 = CARTESIAN_POINT('',(122.845,-113.895,0.)); +#358770 = VECTOR('',#358771,1.); +#358771 = DIRECTION('',(0.,0.,-1.)); +#358772 = ORIENTED_EDGE('',*,*,#358773,.F.); +#358773 = EDGE_CURVE('',#358734,#358766,#358774,.T.); +#358774 = LINE('',#358775,#358776); +#358775 = CARTESIAN_POINT('',(122.845,-113.625,0.)); +#358776 = VECTOR('',#358777,1.); +#358777 = DIRECTION('',(0.,-1.,0.)); +#358778 = PLANE('',#358779); +#358779 = AXIS2_PLACEMENT_3D('',#358780,#358781,#358782); +#358780 = CARTESIAN_POINT('',(122.845,-113.625,0.)); +#358781 = DIRECTION('',(-1.,-0.,-0.)); +#358782 = DIRECTION('',(0.,-1.,0.)); +#358783 = ADVANCED_FACE('',(#358784),#358811,.T.); +#358784 = FACE_BOUND('',#358785,.F.); +#358785 = EDGE_LOOP('',(#358786,#358787,#358796,#358804)); +#358786 = ORIENTED_EDGE('',*,*,#358765,.T.); +#358787 = ORIENTED_EDGE('',*,*,#358788,.T.); +#358788 = EDGE_CURVE('',#358758,#358789,#358791,.T.); +#358789 = VERTEX_POINT('',#358790); +#358790 = CARTESIAN_POINT('',(122.71,-114.03,-4.E-02)); +#358791 = CIRCLE('',#358792,0.135001418495); +#358792 = AXIS2_PLACEMENT_3D('',#358793,#358794,#358795); +#358793 = CARTESIAN_POINT('',(122.70999858151,-113.8949985815,-4.E-02)); +#358794 = DIRECTION('',(0.,0.,-1.)); +#358795 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358796 = ORIENTED_EDGE('',*,*,#358797,.F.); +#358797 = EDGE_CURVE('',#358798,#358789,#358800,.T.); +#358798 = VERTEX_POINT('',#358799); +#358799 = CARTESIAN_POINT('',(122.71,-114.03,0.)); +#358800 = LINE('',#358801,#358802); +#358801 = CARTESIAN_POINT('',(122.71,-114.03,0.)); +#358802 = VECTOR('',#358803,1.); +#358803 = DIRECTION('',(0.,0.,-1.)); +#358804 = ORIENTED_EDGE('',*,*,#358805,.F.); +#358805 = EDGE_CURVE('',#358766,#358798,#358806,.T.); +#358806 = CIRCLE('',#358807,0.135001418495); +#358807 = AXIS2_PLACEMENT_3D('',#358808,#358809,#358810); +#358808 = CARTESIAN_POINT('',(122.70999858151,-113.8949985815,0.)); +#358809 = DIRECTION('',(0.,0.,-1.)); +#358810 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358811 = CYLINDRICAL_SURFACE('',#358812,0.135001418495); +#358812 = AXIS2_PLACEMENT_3D('',#358813,#358814,#358815); +#358813 = CARTESIAN_POINT('',(122.70999858151,-113.8949985815,0.)); +#358814 = DIRECTION('',(-0.,-0.,1.)); +#358815 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#358816 = ADVANCED_FACE('',(#358817),#358842,.F.); +#358817 = FACE_BOUND('',#358818,.F.); +#358818 = EDGE_LOOP('',(#358819,#358820,#358828,#358836)); +#358819 = ORIENTED_EDGE('',*,*,#358797,.T.); +#358820 = ORIENTED_EDGE('',*,*,#358821,.T.); +#358821 = EDGE_CURVE('',#358789,#358822,#358824,.T.); +#358822 = VERTEX_POINT('',#358823); +#358823 = CARTESIAN_POINT('',(122.34,-114.03,-4.E-02)); +#358824 = LINE('',#358825,#358826); +#358825 = CARTESIAN_POINT('',(122.71,-114.03,-4.E-02)); +#358826 = VECTOR('',#358827,1.); +#358827 = DIRECTION('',(-1.,0.,0.)); +#358828 = ORIENTED_EDGE('',*,*,#358829,.F.); +#358829 = EDGE_CURVE('',#358830,#358822,#358832,.T.); +#358830 = VERTEX_POINT('',#358831); +#358831 = CARTESIAN_POINT('',(122.34,-114.03,0.)); +#358832 = LINE('',#358833,#358834); +#358833 = CARTESIAN_POINT('',(122.34,-114.03,0.)); +#358834 = VECTOR('',#358835,1.); +#358835 = DIRECTION('',(0.,0.,-1.)); +#358836 = ORIENTED_EDGE('',*,*,#358837,.F.); +#358837 = EDGE_CURVE('',#358798,#358830,#358838,.T.); +#358838 = LINE('',#358839,#358840); +#358839 = CARTESIAN_POINT('',(122.71,-114.03,0.)); +#358840 = VECTOR('',#358841,1.); +#358841 = DIRECTION('',(-1.,0.,0.)); +#358842 = PLANE('',#358843); +#358843 = AXIS2_PLACEMENT_3D('',#358844,#358845,#358846); +#358844 = CARTESIAN_POINT('',(122.71,-114.03,0.)); +#358845 = DIRECTION('',(0.,1.,0.)); +#358846 = DIRECTION('',(-1.,0.,0.)); +#358847 = ADVANCED_FACE('',(#358848),#358875,.T.); +#358848 = FACE_BOUND('',#358849,.F.); +#358849 = EDGE_LOOP('',(#358850,#358851,#358860,#358868)); +#358850 = ORIENTED_EDGE('',*,*,#358829,.T.); +#358851 = ORIENTED_EDGE('',*,*,#358852,.T.); +#358852 = EDGE_CURVE('',#358822,#358853,#358855,.T.); +#358853 = VERTEX_POINT('',#358854); +#358854 = CARTESIAN_POINT('',(122.205,-113.895,-4.E-02)); +#358855 = CIRCLE('',#358856,0.135001418495); +#358856 = AXIS2_PLACEMENT_3D('',#358857,#358858,#358859); +#358857 = CARTESIAN_POINT('',(122.34000141848,-113.8949985815,-4.E-02)); +#358858 = DIRECTION('',(0.,0.,-1.)); +#358859 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#358860 = ORIENTED_EDGE('',*,*,#358861,.F.); +#358861 = EDGE_CURVE('',#358862,#358853,#358864,.T.); +#358862 = VERTEX_POINT('',#358863); +#358863 = CARTESIAN_POINT('',(122.205,-113.895,0.)); +#358864 = LINE('',#358865,#358866); +#358865 = CARTESIAN_POINT('',(122.205,-113.895,0.)); +#358866 = VECTOR('',#358867,1.); +#358867 = DIRECTION('',(0.,0.,-1.)); +#358868 = ORIENTED_EDGE('',*,*,#358869,.F.); +#358869 = EDGE_CURVE('',#358830,#358862,#358870,.T.); +#358870 = CIRCLE('',#358871,0.135001418495); +#358871 = AXIS2_PLACEMENT_3D('',#358872,#358873,#358874); +#358872 = CARTESIAN_POINT('',(122.34000141848,-113.8949985815,0.)); +#358873 = DIRECTION('',(0.,0.,-1.)); +#358874 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#358875 = CYLINDRICAL_SURFACE('',#358876,0.135001418495); +#358876 = AXIS2_PLACEMENT_3D('',#358877,#358878,#358879); +#358877 = CARTESIAN_POINT('',(122.34000141848,-113.8949985815,0.)); +#358878 = DIRECTION('',(-0.,-0.,1.)); +#358879 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#358880 = ADVANCED_FACE('',(#358881),#358897,.F.); +#358881 = FACE_BOUND('',#358882,.F.); +#358882 = EDGE_LOOP('',(#358883,#358884,#358890,#358891)); +#358883 = ORIENTED_EDGE('',*,*,#358861,.T.); +#358884 = ORIENTED_EDGE('',*,*,#358885,.T.); +#358885 = EDGE_CURVE('',#358853,#358653,#358886,.T.); +#358886 = LINE('',#358887,#358888); +#358887 = CARTESIAN_POINT('',(122.205,-113.895,-4.E-02)); +#358888 = VECTOR('',#358889,1.); +#358889 = DIRECTION('',(0.,1.,0.)); +#358890 = ORIENTED_EDGE('',*,*,#358650,.F.); +#358891 = ORIENTED_EDGE('',*,*,#358892,.F.); +#358892 = EDGE_CURVE('',#358862,#358651,#358893,.T.); +#358893 = LINE('',#358894,#358895); +#358894 = CARTESIAN_POINT('',(122.205,-113.895,0.)); +#358895 = VECTOR('',#358896,1.); +#358896 = DIRECTION('',(0.,1.,0.)); +#358897 = PLANE('',#358898); +#358898 = AXIS2_PLACEMENT_3D('',#358899,#358900,#358901); +#358899 = CARTESIAN_POINT('',(122.205,-113.895,0.)); +#358900 = DIRECTION('',(1.,-0.,0.)); +#358901 = DIRECTION('',(0.,1.,0.)); +#358902 = ADVANCED_FACE('',(#358903),#358913,.F.); +#358903 = FACE_BOUND('',#358904,.F.); +#358904 = EDGE_LOOP('',(#358905,#358906,#358907,#358908,#358909,#358910, + #358911,#358912)); +#358905 = ORIENTED_EDGE('',*,*,#358677,.T.); +#358906 = ORIENTED_EDGE('',*,*,#358709,.T.); +#358907 = ORIENTED_EDGE('',*,*,#358741,.T.); +#358908 = ORIENTED_EDGE('',*,*,#358773,.T.); +#358909 = ORIENTED_EDGE('',*,*,#358805,.T.); +#358910 = ORIENTED_EDGE('',*,*,#358837,.T.); +#358911 = ORIENTED_EDGE('',*,*,#358869,.T.); +#358912 = ORIENTED_EDGE('',*,*,#358892,.T.); +#358913 = PLANE('',#358914); +#358914 = AXIS2_PLACEMENT_3D('',#358915,#358916,#358917); +#358915 = CARTESIAN_POINT('',(0.,0.,0.)); +#358916 = DIRECTION('',(-0.,-0.,-1.)); +#358917 = DIRECTION('',(-1.,0.,0.)); +#358918 = ADVANCED_FACE('',(#358919),#358929,.T.); +#358919 = FACE_BOUND('',#358920,.T.); +#358920 = EDGE_LOOP('',(#358921,#358922,#358923,#358924,#358925,#358926, + #358927,#358928)); +#358921 = ORIENTED_EDGE('',*,*,#358660,.T.); +#358922 = ORIENTED_EDGE('',*,*,#358693,.T.); +#358923 = ORIENTED_EDGE('',*,*,#358724,.T.); +#358924 = ORIENTED_EDGE('',*,*,#358757,.T.); +#358925 = ORIENTED_EDGE('',*,*,#358788,.T.); +#358926 = ORIENTED_EDGE('',*,*,#358821,.T.); +#358927 = ORIENTED_EDGE('',*,*,#358852,.T.); +#358928 = ORIENTED_EDGE('',*,*,#358885,.T.); +#358929 = PLANE('',#358930); +#358930 = AXIS2_PLACEMENT_3D('',#358931,#358932,#358933); +#358931 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#358932 = DIRECTION('',(-0.,-0.,-1.)); +#358933 = DIRECTION('',(-1.,0.,0.)); +#358934 = MANIFOLD_SOLID_BREP('',#358935); +#358935 = CLOSED_SHELL('',(#358936,#358978,#359009,#359042,#359073, + #359106,#359137,#359170,#359192,#359208)); +#358936 = ADVANCED_FACE('',(#358937),#358973,.T.); +#358937 = FACE_BOUND('',#358938,.F.); +#358938 = EDGE_LOOP('',(#358939,#358949,#358958,#358966)); +#358939 = ORIENTED_EDGE('',*,*,#358940,.T.); +#358940 = EDGE_CURVE('',#358941,#358943,#358945,.T.); +#358941 = VERTEX_POINT('',#358942); +#358942 = CARTESIAN_POINT('',(132.125,-107.2125,0.)); +#358943 = VERTEX_POINT('',#358944); +#358944 = CARTESIAN_POINT('',(132.125,-107.2125,-4.E-02)); +#358945 = LINE('',#358946,#358947); +#358946 = CARTESIAN_POINT('',(132.125,-107.2125,0.)); +#358947 = VECTOR('',#358948,1.); +#358948 = DIRECTION('',(0.,0.,-1.)); +#358949 = ORIENTED_EDGE('',*,*,#358950,.T.); +#358950 = EDGE_CURVE('',#358943,#358951,#358953,.T.); +#358951 = VERTEX_POINT('',#358952); +#358952 = CARTESIAN_POINT('',(132.275,-107.0625,-4.E-02)); +#358953 = CIRCLE('',#358954,0.150000058649); +#358954 = AXIS2_PLACEMENT_3D('',#358955,#358956,#358957); +#358955 = CARTESIAN_POINT('',(132.27500005864,-107.2125000586,-4.E-02)); +#358956 = DIRECTION('',(0.,0.,-1.)); +#358957 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#358958 = ORIENTED_EDGE('',*,*,#358959,.F.); +#358959 = EDGE_CURVE('',#358960,#358951,#358962,.T.); +#358960 = VERTEX_POINT('',#358961); +#358961 = CARTESIAN_POINT('',(132.275,-107.0625,0.)); +#358962 = LINE('',#358963,#358964); +#358963 = CARTESIAN_POINT('',(132.275,-107.0625,0.)); +#358964 = VECTOR('',#358965,1.); +#358965 = DIRECTION('',(0.,0.,-1.)); +#358966 = ORIENTED_EDGE('',*,*,#358967,.F.); +#358967 = EDGE_CURVE('',#358941,#358960,#358968,.T.); +#358968 = CIRCLE('',#358969,0.150000058649); +#358969 = AXIS2_PLACEMENT_3D('',#358970,#358971,#358972); +#358970 = CARTESIAN_POINT('',(132.27500005864,-107.2125000586,0.)); +#358971 = DIRECTION('',(0.,0.,-1.)); +#358972 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#358973 = CYLINDRICAL_SURFACE('',#358974,0.150000058649); +#358974 = AXIS2_PLACEMENT_3D('',#358975,#358976,#358977); +#358975 = CARTESIAN_POINT('',(132.27500005864,-107.2125000586,0.)); +#358976 = DIRECTION('',(-0.,-0.,1.)); +#358977 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#358978 = ADVANCED_FACE('',(#358979),#359004,.F.); +#358979 = FACE_BOUND('',#358980,.F.); +#358980 = EDGE_LOOP('',(#358981,#358982,#358990,#358998)); +#358981 = ORIENTED_EDGE('',*,*,#358959,.T.); +#358982 = ORIENTED_EDGE('',*,*,#358983,.T.); +#358983 = EDGE_CURVE('',#358951,#358984,#358986,.T.); +#358984 = VERTEX_POINT('',#358985); +#358985 = CARTESIAN_POINT('',(132.575,-107.0625,-4.E-02)); +#358986 = LINE('',#358987,#358988); +#358987 = CARTESIAN_POINT('',(132.275,-107.0625,-4.E-02)); +#358988 = VECTOR('',#358989,1.); +#358989 = DIRECTION('',(1.,0.,0.)); +#358990 = ORIENTED_EDGE('',*,*,#358991,.F.); +#358991 = EDGE_CURVE('',#358992,#358984,#358994,.T.); +#358992 = VERTEX_POINT('',#358993); +#358993 = CARTESIAN_POINT('',(132.575,-107.0625,0.)); +#358994 = LINE('',#358995,#358996); +#358995 = CARTESIAN_POINT('',(132.575,-107.0625,0.)); +#358996 = VECTOR('',#358997,1.); +#358997 = DIRECTION('',(0.,0.,-1.)); +#358998 = ORIENTED_EDGE('',*,*,#358999,.F.); +#358999 = EDGE_CURVE('',#358960,#358992,#359000,.T.); +#359000 = LINE('',#359001,#359002); +#359001 = CARTESIAN_POINT('',(132.275,-107.0625,0.)); +#359002 = VECTOR('',#359003,1.); +#359003 = DIRECTION('',(1.,0.,0.)); +#359004 = PLANE('',#359005); +#359005 = AXIS2_PLACEMENT_3D('',#359006,#359007,#359008); +#359006 = CARTESIAN_POINT('',(132.275,-107.0625,0.)); +#359007 = DIRECTION('',(0.,-1.,0.)); +#359008 = DIRECTION('',(1.,0.,0.)); +#359009 = ADVANCED_FACE('',(#359010),#359037,.T.); +#359010 = FACE_BOUND('',#359011,.F.); +#359011 = EDGE_LOOP('',(#359012,#359013,#359022,#359030)); +#359012 = ORIENTED_EDGE('',*,*,#358991,.T.); +#359013 = ORIENTED_EDGE('',*,*,#359014,.T.); +#359014 = EDGE_CURVE('',#358984,#359015,#359017,.T.); +#359015 = VERTEX_POINT('',#359016); +#359016 = CARTESIAN_POINT('',(132.725,-107.2125,-4.E-02)); +#359017 = CIRCLE('',#359018,0.150000058649); +#359018 = AXIS2_PLACEMENT_3D('',#359019,#359020,#359021); +#359019 = CARTESIAN_POINT('',(132.57499994135,-107.2125000586,-4.E-02)); +#359020 = DIRECTION('',(0.,0.,-1.)); +#359021 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#359022 = ORIENTED_EDGE('',*,*,#359023,.F.); +#359023 = EDGE_CURVE('',#359024,#359015,#359026,.T.); +#359024 = VERTEX_POINT('',#359025); +#359025 = CARTESIAN_POINT('',(132.725,-107.2125,0.)); +#359026 = LINE('',#359027,#359028); +#359027 = CARTESIAN_POINT('',(132.725,-107.2125,0.)); +#359028 = VECTOR('',#359029,1.); +#359029 = DIRECTION('',(0.,0.,-1.)); +#359030 = ORIENTED_EDGE('',*,*,#359031,.F.); +#359031 = EDGE_CURVE('',#358992,#359024,#359032,.T.); +#359032 = CIRCLE('',#359033,0.150000058649); +#359033 = AXIS2_PLACEMENT_3D('',#359034,#359035,#359036); +#359034 = CARTESIAN_POINT('',(132.57499994135,-107.2125000586,0.)); +#359035 = DIRECTION('',(0.,0.,-1.)); +#359036 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#359037 = CYLINDRICAL_SURFACE('',#359038,0.150000058649); +#359038 = AXIS2_PLACEMENT_3D('',#359039,#359040,#359041); +#359039 = CARTESIAN_POINT('',(132.57499994135,-107.2125000586,0.)); +#359040 = DIRECTION('',(-0.,-0.,1.)); +#359041 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#359042 = ADVANCED_FACE('',(#359043),#359068,.F.); +#359043 = FACE_BOUND('',#359044,.F.); +#359044 = EDGE_LOOP('',(#359045,#359046,#359054,#359062)); +#359045 = ORIENTED_EDGE('',*,*,#359023,.T.); +#359046 = ORIENTED_EDGE('',*,*,#359047,.T.); +#359047 = EDGE_CURVE('',#359015,#359048,#359050,.T.); +#359048 = VERTEX_POINT('',#359049); +#359049 = CARTESIAN_POINT('',(132.725,-108.2375,-4.E-02)); +#359050 = LINE('',#359051,#359052); +#359051 = CARTESIAN_POINT('',(132.725,-107.2125,-4.E-02)); +#359052 = VECTOR('',#359053,1.); +#359053 = DIRECTION('',(0.,-1.,0.)); +#359054 = ORIENTED_EDGE('',*,*,#359055,.F.); +#359055 = EDGE_CURVE('',#359056,#359048,#359058,.T.); +#359056 = VERTEX_POINT('',#359057); +#359057 = CARTESIAN_POINT('',(132.725,-108.2375,0.)); +#359058 = LINE('',#359059,#359060); +#359059 = CARTESIAN_POINT('',(132.725,-108.2375,0.)); +#359060 = VECTOR('',#359061,1.); +#359061 = DIRECTION('',(0.,0.,-1.)); +#359062 = ORIENTED_EDGE('',*,*,#359063,.F.); +#359063 = EDGE_CURVE('',#359024,#359056,#359064,.T.); +#359064 = LINE('',#359065,#359066); +#359065 = CARTESIAN_POINT('',(132.725,-107.2125,0.)); +#359066 = VECTOR('',#359067,1.); +#359067 = DIRECTION('',(0.,-1.,0.)); +#359068 = PLANE('',#359069); +#359069 = AXIS2_PLACEMENT_3D('',#359070,#359071,#359072); +#359070 = CARTESIAN_POINT('',(132.725,-107.2125,0.)); +#359071 = DIRECTION('',(-1.,-0.,-0.)); +#359072 = DIRECTION('',(0.,-1.,0.)); +#359073 = ADVANCED_FACE('',(#359074),#359101,.T.); +#359074 = FACE_BOUND('',#359075,.F.); +#359075 = EDGE_LOOP('',(#359076,#359077,#359086,#359094)); +#359076 = ORIENTED_EDGE('',*,*,#359055,.T.); +#359077 = ORIENTED_EDGE('',*,*,#359078,.T.); +#359078 = EDGE_CURVE('',#359048,#359079,#359081,.T.); +#359079 = VERTEX_POINT('',#359080); +#359080 = CARTESIAN_POINT('',(132.575,-108.3875,-4.E-02)); +#359081 = CIRCLE('',#359082,0.150000058649); +#359082 = AXIS2_PLACEMENT_3D('',#359083,#359084,#359085); +#359083 = CARTESIAN_POINT('',(132.57499994135,-108.2374999413,-4.E-02)); +#359084 = DIRECTION('',(0.,0.,-1.)); +#359085 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#359086 = ORIENTED_EDGE('',*,*,#359087,.F.); +#359087 = EDGE_CURVE('',#359088,#359079,#359090,.T.); +#359088 = VERTEX_POINT('',#359089); +#359089 = CARTESIAN_POINT('',(132.575,-108.3875,0.)); +#359090 = LINE('',#359091,#359092); +#359091 = CARTESIAN_POINT('',(132.575,-108.3875,0.)); +#359092 = VECTOR('',#359093,1.); +#359093 = DIRECTION('',(0.,0.,-1.)); +#359094 = ORIENTED_EDGE('',*,*,#359095,.F.); +#359095 = EDGE_CURVE('',#359056,#359088,#359096,.T.); +#359096 = CIRCLE('',#359097,0.150000058649); +#359097 = AXIS2_PLACEMENT_3D('',#359098,#359099,#359100); +#359098 = CARTESIAN_POINT('',(132.57499994135,-108.2374999413,0.)); +#359099 = DIRECTION('',(0.,0.,-1.)); +#359100 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#359101 = CYLINDRICAL_SURFACE('',#359102,0.150000058649); +#359102 = AXIS2_PLACEMENT_3D('',#359103,#359104,#359105); +#359103 = CARTESIAN_POINT('',(132.57499994135,-108.2374999413,0.)); +#359104 = DIRECTION('',(-0.,-0.,1.)); +#359105 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#359106 = ADVANCED_FACE('',(#359107),#359132,.F.); +#359107 = FACE_BOUND('',#359108,.F.); +#359108 = EDGE_LOOP('',(#359109,#359110,#359118,#359126)); +#359109 = ORIENTED_EDGE('',*,*,#359087,.T.); +#359110 = ORIENTED_EDGE('',*,*,#359111,.T.); +#359111 = EDGE_CURVE('',#359079,#359112,#359114,.T.); +#359112 = VERTEX_POINT('',#359113); +#359113 = CARTESIAN_POINT('',(132.275,-108.3875,-4.E-02)); +#359114 = LINE('',#359115,#359116); +#359115 = CARTESIAN_POINT('',(132.575,-108.3875,-4.E-02)); +#359116 = VECTOR('',#359117,1.); +#359117 = DIRECTION('',(-1.,0.,0.)); +#359118 = ORIENTED_EDGE('',*,*,#359119,.F.); +#359119 = EDGE_CURVE('',#359120,#359112,#359122,.T.); +#359120 = VERTEX_POINT('',#359121); +#359121 = CARTESIAN_POINT('',(132.275,-108.3875,0.)); +#359122 = LINE('',#359123,#359124); +#359123 = CARTESIAN_POINT('',(132.275,-108.3875,0.)); +#359124 = VECTOR('',#359125,1.); +#359125 = DIRECTION('',(0.,0.,-1.)); +#359126 = ORIENTED_EDGE('',*,*,#359127,.F.); +#359127 = EDGE_CURVE('',#359088,#359120,#359128,.T.); +#359128 = LINE('',#359129,#359130); +#359129 = CARTESIAN_POINT('',(132.575,-108.3875,0.)); +#359130 = VECTOR('',#359131,1.); +#359131 = DIRECTION('',(-1.,0.,0.)); +#359132 = PLANE('',#359133); +#359133 = AXIS2_PLACEMENT_3D('',#359134,#359135,#359136); +#359134 = CARTESIAN_POINT('',(132.575,-108.3875,0.)); +#359135 = DIRECTION('',(0.,1.,0.)); +#359136 = DIRECTION('',(-1.,0.,0.)); +#359137 = ADVANCED_FACE('',(#359138),#359165,.T.); +#359138 = FACE_BOUND('',#359139,.F.); +#359139 = EDGE_LOOP('',(#359140,#359141,#359150,#359158)); +#359140 = ORIENTED_EDGE('',*,*,#359119,.T.); +#359141 = ORIENTED_EDGE('',*,*,#359142,.T.); +#359142 = EDGE_CURVE('',#359112,#359143,#359145,.T.); +#359143 = VERTEX_POINT('',#359144); +#359144 = CARTESIAN_POINT('',(132.125,-108.2375,-4.E-02)); +#359145 = CIRCLE('',#359146,0.150000058649); +#359146 = AXIS2_PLACEMENT_3D('',#359147,#359148,#359149); +#359147 = CARTESIAN_POINT('',(132.27500005864,-108.2374999413,-4.E-02)); +#359148 = DIRECTION('',(0.,0.,-1.)); +#359149 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359150 = ORIENTED_EDGE('',*,*,#359151,.F.); +#359151 = EDGE_CURVE('',#359152,#359143,#359154,.T.); +#359152 = VERTEX_POINT('',#359153); +#359153 = CARTESIAN_POINT('',(132.125,-108.2375,0.)); +#359154 = LINE('',#359155,#359156); +#359155 = CARTESIAN_POINT('',(132.125,-108.2375,0.)); +#359156 = VECTOR('',#359157,1.); +#359157 = DIRECTION('',(0.,0.,-1.)); +#359158 = ORIENTED_EDGE('',*,*,#359159,.F.); +#359159 = EDGE_CURVE('',#359120,#359152,#359160,.T.); +#359160 = CIRCLE('',#359161,0.150000058649); +#359161 = AXIS2_PLACEMENT_3D('',#359162,#359163,#359164); +#359162 = CARTESIAN_POINT('',(132.27500005864,-108.2374999413,0.)); +#359163 = DIRECTION('',(0.,0.,-1.)); +#359164 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359165 = CYLINDRICAL_SURFACE('',#359166,0.150000058649); +#359166 = AXIS2_PLACEMENT_3D('',#359167,#359168,#359169); +#359167 = CARTESIAN_POINT('',(132.27500005864,-108.2374999413,0.)); +#359168 = DIRECTION('',(-0.,-0.,1.)); +#359169 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359170 = ADVANCED_FACE('',(#359171),#359187,.F.); +#359171 = FACE_BOUND('',#359172,.F.); +#359172 = EDGE_LOOP('',(#359173,#359174,#359180,#359181)); +#359173 = ORIENTED_EDGE('',*,*,#359151,.T.); +#359174 = ORIENTED_EDGE('',*,*,#359175,.T.); +#359175 = EDGE_CURVE('',#359143,#358943,#359176,.T.); +#359176 = LINE('',#359177,#359178); +#359177 = CARTESIAN_POINT('',(132.125,-108.2375,-4.E-02)); +#359178 = VECTOR('',#359179,1.); +#359179 = DIRECTION('',(0.,1.,0.)); +#359180 = ORIENTED_EDGE('',*,*,#358940,.F.); +#359181 = ORIENTED_EDGE('',*,*,#359182,.F.); +#359182 = EDGE_CURVE('',#359152,#358941,#359183,.T.); +#359183 = LINE('',#359184,#359185); +#359184 = CARTESIAN_POINT('',(132.125,-108.2375,0.)); +#359185 = VECTOR('',#359186,1.); +#359186 = DIRECTION('',(0.,1.,0.)); +#359187 = PLANE('',#359188); +#359188 = AXIS2_PLACEMENT_3D('',#359189,#359190,#359191); +#359189 = CARTESIAN_POINT('',(132.125,-108.2375,0.)); +#359190 = DIRECTION('',(1.,-0.,0.)); +#359191 = DIRECTION('',(0.,1.,0.)); +#359192 = ADVANCED_FACE('',(#359193),#359203,.F.); +#359193 = FACE_BOUND('',#359194,.F.); +#359194 = EDGE_LOOP('',(#359195,#359196,#359197,#359198,#359199,#359200, + #359201,#359202)); +#359195 = ORIENTED_EDGE('',*,*,#358967,.T.); +#359196 = ORIENTED_EDGE('',*,*,#358999,.T.); +#359197 = ORIENTED_EDGE('',*,*,#359031,.T.); +#359198 = ORIENTED_EDGE('',*,*,#359063,.T.); +#359199 = ORIENTED_EDGE('',*,*,#359095,.T.); +#359200 = ORIENTED_EDGE('',*,*,#359127,.T.); +#359201 = ORIENTED_EDGE('',*,*,#359159,.T.); +#359202 = ORIENTED_EDGE('',*,*,#359182,.T.); +#359203 = PLANE('',#359204); +#359204 = AXIS2_PLACEMENT_3D('',#359205,#359206,#359207); +#359205 = CARTESIAN_POINT('',(0.,0.,0.)); +#359206 = DIRECTION('',(-0.,-0.,-1.)); +#359207 = DIRECTION('',(-1.,0.,0.)); +#359208 = ADVANCED_FACE('',(#359209),#359219,.T.); +#359209 = FACE_BOUND('',#359210,.T.); +#359210 = EDGE_LOOP('',(#359211,#359212,#359213,#359214,#359215,#359216, + #359217,#359218)); +#359211 = ORIENTED_EDGE('',*,*,#358950,.T.); +#359212 = ORIENTED_EDGE('',*,*,#358983,.T.); +#359213 = ORIENTED_EDGE('',*,*,#359014,.T.); +#359214 = ORIENTED_EDGE('',*,*,#359047,.T.); +#359215 = ORIENTED_EDGE('',*,*,#359078,.T.); +#359216 = ORIENTED_EDGE('',*,*,#359111,.T.); +#359217 = ORIENTED_EDGE('',*,*,#359142,.T.); +#359218 = ORIENTED_EDGE('',*,*,#359175,.T.); +#359219 = PLANE('',#359220); +#359220 = AXIS2_PLACEMENT_3D('',#359221,#359222,#359223); +#359221 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#359222 = DIRECTION('',(-0.,-0.,-1.)); +#359223 = DIRECTION('',(-1.,0.,0.)); +#359224 = MANIFOLD_SOLID_BREP('',#359225); +#359225 = CLOSED_SHELL('',(#359226,#359268,#359299,#359332,#359363, + #359396,#359427,#359460,#359482,#359498)); +#359226 = ADVANCED_FACE('',(#359227),#359263,.T.); +#359227 = FACE_BOUND('',#359228,.F.); +#359228 = EDGE_LOOP('',(#359229,#359239,#359248,#359256)); +#359229 = ORIENTED_EDGE('',*,*,#359230,.T.); +#359230 = EDGE_CURVE('',#359231,#359233,#359235,.T.); +#359231 = VERTEX_POINT('',#359232); +#359232 = CARTESIAN_POINT('',(130.225,-109.4875,0.)); +#359233 = VERTEX_POINT('',#359234); +#359234 = CARTESIAN_POINT('',(130.225,-109.4875,-4.E-02)); +#359235 = LINE('',#359236,#359237); +#359236 = CARTESIAN_POINT('',(130.225,-109.4875,0.)); +#359237 = VECTOR('',#359238,1.); +#359238 = DIRECTION('',(0.,0.,-1.)); +#359239 = ORIENTED_EDGE('',*,*,#359240,.T.); +#359240 = EDGE_CURVE('',#359233,#359241,#359243,.T.); +#359241 = VERTEX_POINT('',#359242); +#359242 = CARTESIAN_POINT('',(130.375,-109.3375,-4.E-02)); +#359243 = CIRCLE('',#359244,0.150000058649); +#359244 = AXIS2_PLACEMENT_3D('',#359245,#359246,#359247); +#359245 = CARTESIAN_POINT('',(130.37500005864,-109.4875000586,-4.E-02)); +#359246 = DIRECTION('',(0.,0.,-1.)); +#359247 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#359248 = ORIENTED_EDGE('',*,*,#359249,.F.); +#359249 = EDGE_CURVE('',#359250,#359241,#359252,.T.); +#359250 = VERTEX_POINT('',#359251); +#359251 = CARTESIAN_POINT('',(130.375,-109.3375,0.)); +#359252 = LINE('',#359253,#359254); +#359253 = CARTESIAN_POINT('',(130.375,-109.3375,0.)); +#359254 = VECTOR('',#359255,1.); +#359255 = DIRECTION('',(0.,0.,-1.)); +#359256 = ORIENTED_EDGE('',*,*,#359257,.F.); +#359257 = EDGE_CURVE('',#359231,#359250,#359258,.T.); +#359258 = CIRCLE('',#359259,0.150000058649); +#359259 = AXIS2_PLACEMENT_3D('',#359260,#359261,#359262); +#359260 = CARTESIAN_POINT('',(130.37500005864,-109.4875000586,0.)); +#359261 = DIRECTION('',(0.,0.,-1.)); +#359262 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#359263 = CYLINDRICAL_SURFACE('',#359264,0.150000058649); +#359264 = AXIS2_PLACEMENT_3D('',#359265,#359266,#359267); +#359265 = CARTESIAN_POINT('',(130.37500005864,-109.4875000586,0.)); +#359266 = DIRECTION('',(-0.,-0.,1.)); +#359267 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#359268 = ADVANCED_FACE('',(#359269),#359294,.F.); +#359269 = FACE_BOUND('',#359270,.F.); +#359270 = EDGE_LOOP('',(#359271,#359272,#359280,#359288)); +#359271 = ORIENTED_EDGE('',*,*,#359249,.T.); +#359272 = ORIENTED_EDGE('',*,*,#359273,.T.); +#359273 = EDGE_CURVE('',#359241,#359274,#359276,.T.); +#359274 = VERTEX_POINT('',#359275); +#359275 = CARTESIAN_POINT('',(130.675,-109.3375,-4.E-02)); +#359276 = LINE('',#359277,#359278); +#359277 = CARTESIAN_POINT('',(130.375,-109.3375,-4.E-02)); +#359278 = VECTOR('',#359279,1.); +#359279 = DIRECTION('',(1.,0.,0.)); +#359280 = ORIENTED_EDGE('',*,*,#359281,.F.); +#359281 = EDGE_CURVE('',#359282,#359274,#359284,.T.); +#359282 = VERTEX_POINT('',#359283); +#359283 = CARTESIAN_POINT('',(130.675,-109.3375,0.)); +#359284 = LINE('',#359285,#359286); +#359285 = CARTESIAN_POINT('',(130.675,-109.3375,0.)); +#359286 = VECTOR('',#359287,1.); +#359287 = DIRECTION('',(0.,0.,-1.)); +#359288 = ORIENTED_EDGE('',*,*,#359289,.F.); +#359289 = EDGE_CURVE('',#359250,#359282,#359290,.T.); +#359290 = LINE('',#359291,#359292); +#359291 = CARTESIAN_POINT('',(130.375,-109.3375,0.)); +#359292 = VECTOR('',#359293,1.); +#359293 = DIRECTION('',(1.,0.,0.)); +#359294 = PLANE('',#359295); +#359295 = AXIS2_PLACEMENT_3D('',#359296,#359297,#359298); +#359296 = CARTESIAN_POINT('',(130.375,-109.3375,0.)); +#359297 = DIRECTION('',(0.,-1.,0.)); +#359298 = DIRECTION('',(1.,0.,0.)); +#359299 = ADVANCED_FACE('',(#359300),#359327,.T.); +#359300 = FACE_BOUND('',#359301,.F.); +#359301 = EDGE_LOOP('',(#359302,#359303,#359312,#359320)); +#359302 = ORIENTED_EDGE('',*,*,#359281,.T.); +#359303 = ORIENTED_EDGE('',*,*,#359304,.T.); +#359304 = EDGE_CURVE('',#359274,#359305,#359307,.T.); +#359305 = VERTEX_POINT('',#359306); +#359306 = CARTESIAN_POINT('',(130.825,-109.4875,-4.E-02)); +#359307 = CIRCLE('',#359308,0.150000058649); +#359308 = AXIS2_PLACEMENT_3D('',#359309,#359310,#359311); +#359309 = CARTESIAN_POINT('',(130.67499994135,-109.4875000586,-4.E-02)); +#359310 = DIRECTION('',(0.,0.,-1.)); +#359311 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#359312 = ORIENTED_EDGE('',*,*,#359313,.F.); +#359313 = EDGE_CURVE('',#359314,#359305,#359316,.T.); +#359314 = VERTEX_POINT('',#359315); +#359315 = CARTESIAN_POINT('',(130.825,-109.4875,0.)); +#359316 = LINE('',#359317,#359318); +#359317 = CARTESIAN_POINT('',(130.825,-109.4875,0.)); +#359318 = VECTOR('',#359319,1.); +#359319 = DIRECTION('',(0.,0.,-1.)); +#359320 = ORIENTED_EDGE('',*,*,#359321,.F.); +#359321 = EDGE_CURVE('',#359282,#359314,#359322,.T.); +#359322 = CIRCLE('',#359323,0.150000058649); +#359323 = AXIS2_PLACEMENT_3D('',#359324,#359325,#359326); +#359324 = CARTESIAN_POINT('',(130.67499994135,-109.4875000586,0.)); +#359325 = DIRECTION('',(0.,0.,-1.)); +#359326 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#359327 = CYLINDRICAL_SURFACE('',#359328,0.150000058649); +#359328 = AXIS2_PLACEMENT_3D('',#359329,#359330,#359331); +#359329 = CARTESIAN_POINT('',(130.67499994135,-109.4875000586,0.)); +#359330 = DIRECTION('',(-0.,-0.,1.)); +#359331 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#359332 = ADVANCED_FACE('',(#359333),#359358,.F.); +#359333 = FACE_BOUND('',#359334,.F.); +#359334 = EDGE_LOOP('',(#359335,#359336,#359344,#359352)); +#359335 = ORIENTED_EDGE('',*,*,#359313,.T.); +#359336 = ORIENTED_EDGE('',*,*,#359337,.T.); +#359337 = EDGE_CURVE('',#359305,#359338,#359340,.T.); +#359338 = VERTEX_POINT('',#359339); +#359339 = CARTESIAN_POINT('',(130.825,-110.5125,-4.E-02)); +#359340 = LINE('',#359341,#359342); +#359341 = CARTESIAN_POINT('',(130.825,-109.4875,-4.E-02)); +#359342 = VECTOR('',#359343,1.); +#359343 = DIRECTION('',(0.,-1.,0.)); +#359344 = ORIENTED_EDGE('',*,*,#359345,.F.); +#359345 = EDGE_CURVE('',#359346,#359338,#359348,.T.); +#359346 = VERTEX_POINT('',#359347); +#359347 = CARTESIAN_POINT('',(130.825,-110.5125,0.)); +#359348 = LINE('',#359349,#359350); +#359349 = CARTESIAN_POINT('',(130.825,-110.5125,0.)); +#359350 = VECTOR('',#359351,1.); +#359351 = DIRECTION('',(0.,0.,-1.)); +#359352 = ORIENTED_EDGE('',*,*,#359353,.F.); +#359353 = EDGE_CURVE('',#359314,#359346,#359354,.T.); +#359354 = LINE('',#359355,#359356); +#359355 = CARTESIAN_POINT('',(130.825,-109.4875,0.)); +#359356 = VECTOR('',#359357,1.); +#359357 = DIRECTION('',(0.,-1.,0.)); +#359358 = PLANE('',#359359); +#359359 = AXIS2_PLACEMENT_3D('',#359360,#359361,#359362); +#359360 = CARTESIAN_POINT('',(130.825,-109.4875,0.)); +#359361 = DIRECTION('',(-1.,-0.,-0.)); +#359362 = DIRECTION('',(0.,-1.,0.)); +#359363 = ADVANCED_FACE('',(#359364),#359391,.T.); +#359364 = FACE_BOUND('',#359365,.F.); +#359365 = EDGE_LOOP('',(#359366,#359367,#359376,#359384)); +#359366 = ORIENTED_EDGE('',*,*,#359345,.T.); +#359367 = ORIENTED_EDGE('',*,*,#359368,.T.); +#359368 = EDGE_CURVE('',#359338,#359369,#359371,.T.); +#359369 = VERTEX_POINT('',#359370); +#359370 = CARTESIAN_POINT('',(130.675,-110.6625,-4.E-02)); +#359371 = CIRCLE('',#359372,0.150000058649); +#359372 = AXIS2_PLACEMENT_3D('',#359373,#359374,#359375); +#359373 = CARTESIAN_POINT('',(130.67499994135,-110.5124999413,-4.E-02)); +#359374 = DIRECTION('',(0.,0.,-1.)); +#359375 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#359376 = ORIENTED_EDGE('',*,*,#359377,.F.); +#359377 = EDGE_CURVE('',#359378,#359369,#359380,.T.); +#359378 = VERTEX_POINT('',#359379); +#359379 = CARTESIAN_POINT('',(130.675,-110.6625,0.)); +#359380 = LINE('',#359381,#359382); +#359381 = CARTESIAN_POINT('',(130.675,-110.6625,0.)); +#359382 = VECTOR('',#359383,1.); +#359383 = DIRECTION('',(0.,0.,-1.)); +#359384 = ORIENTED_EDGE('',*,*,#359385,.F.); +#359385 = EDGE_CURVE('',#359346,#359378,#359386,.T.); +#359386 = CIRCLE('',#359387,0.150000058649); +#359387 = AXIS2_PLACEMENT_3D('',#359388,#359389,#359390); +#359388 = CARTESIAN_POINT('',(130.67499994135,-110.5124999413,0.)); +#359389 = DIRECTION('',(0.,0.,-1.)); +#359390 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#359391 = CYLINDRICAL_SURFACE('',#359392,0.150000058649); +#359392 = AXIS2_PLACEMENT_3D('',#359393,#359394,#359395); +#359393 = CARTESIAN_POINT('',(130.67499994135,-110.5124999413,0.)); +#359394 = DIRECTION('',(-0.,-0.,1.)); +#359395 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#359396 = ADVANCED_FACE('',(#359397),#359422,.F.); +#359397 = FACE_BOUND('',#359398,.F.); +#359398 = EDGE_LOOP('',(#359399,#359400,#359408,#359416)); +#359399 = ORIENTED_EDGE('',*,*,#359377,.T.); +#359400 = ORIENTED_EDGE('',*,*,#359401,.T.); +#359401 = EDGE_CURVE('',#359369,#359402,#359404,.T.); +#359402 = VERTEX_POINT('',#359403); +#359403 = CARTESIAN_POINT('',(130.375,-110.6625,-4.E-02)); +#359404 = LINE('',#359405,#359406); +#359405 = CARTESIAN_POINT('',(130.675,-110.6625,-4.E-02)); +#359406 = VECTOR('',#359407,1.); +#359407 = DIRECTION('',(-1.,0.,0.)); +#359408 = ORIENTED_EDGE('',*,*,#359409,.F.); +#359409 = EDGE_CURVE('',#359410,#359402,#359412,.T.); +#359410 = VERTEX_POINT('',#359411); +#359411 = CARTESIAN_POINT('',(130.375,-110.6625,0.)); +#359412 = LINE('',#359413,#359414); +#359413 = CARTESIAN_POINT('',(130.375,-110.6625,0.)); +#359414 = VECTOR('',#359415,1.); +#359415 = DIRECTION('',(0.,0.,-1.)); +#359416 = ORIENTED_EDGE('',*,*,#359417,.F.); +#359417 = EDGE_CURVE('',#359378,#359410,#359418,.T.); +#359418 = LINE('',#359419,#359420); +#359419 = CARTESIAN_POINT('',(130.675,-110.6625,0.)); +#359420 = VECTOR('',#359421,1.); +#359421 = DIRECTION('',(-1.,0.,0.)); +#359422 = PLANE('',#359423); +#359423 = AXIS2_PLACEMENT_3D('',#359424,#359425,#359426); +#359424 = CARTESIAN_POINT('',(130.675,-110.6625,0.)); +#359425 = DIRECTION('',(0.,1.,0.)); +#359426 = DIRECTION('',(-1.,0.,0.)); +#359427 = ADVANCED_FACE('',(#359428),#359455,.T.); +#359428 = FACE_BOUND('',#359429,.F.); +#359429 = EDGE_LOOP('',(#359430,#359431,#359440,#359448)); +#359430 = ORIENTED_EDGE('',*,*,#359409,.T.); +#359431 = ORIENTED_EDGE('',*,*,#359432,.T.); +#359432 = EDGE_CURVE('',#359402,#359433,#359435,.T.); +#359433 = VERTEX_POINT('',#359434); +#359434 = CARTESIAN_POINT('',(130.225,-110.5125,-4.E-02)); +#359435 = CIRCLE('',#359436,0.150000058649); +#359436 = AXIS2_PLACEMENT_3D('',#359437,#359438,#359439); +#359437 = CARTESIAN_POINT('',(130.37500005864,-110.5124999413,-4.E-02)); +#359438 = DIRECTION('',(0.,0.,-1.)); +#359439 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359440 = ORIENTED_EDGE('',*,*,#359441,.F.); +#359441 = EDGE_CURVE('',#359442,#359433,#359444,.T.); +#359442 = VERTEX_POINT('',#359443); +#359443 = CARTESIAN_POINT('',(130.225,-110.5125,0.)); +#359444 = LINE('',#359445,#359446); +#359445 = CARTESIAN_POINT('',(130.225,-110.5125,0.)); +#359446 = VECTOR('',#359447,1.); +#359447 = DIRECTION('',(0.,0.,-1.)); +#359448 = ORIENTED_EDGE('',*,*,#359449,.F.); +#359449 = EDGE_CURVE('',#359410,#359442,#359450,.T.); +#359450 = CIRCLE('',#359451,0.150000058649); +#359451 = AXIS2_PLACEMENT_3D('',#359452,#359453,#359454); +#359452 = CARTESIAN_POINT('',(130.37500005864,-110.5124999413,0.)); +#359453 = DIRECTION('',(0.,0.,-1.)); +#359454 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359455 = CYLINDRICAL_SURFACE('',#359456,0.150000058649); +#359456 = AXIS2_PLACEMENT_3D('',#359457,#359458,#359459); +#359457 = CARTESIAN_POINT('',(130.37500005864,-110.5124999413,0.)); +#359458 = DIRECTION('',(-0.,-0.,1.)); +#359459 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#359460 = ADVANCED_FACE('',(#359461),#359477,.F.); +#359461 = FACE_BOUND('',#359462,.F.); +#359462 = EDGE_LOOP('',(#359463,#359464,#359470,#359471)); +#359463 = ORIENTED_EDGE('',*,*,#359441,.T.); +#359464 = ORIENTED_EDGE('',*,*,#359465,.T.); +#359465 = EDGE_CURVE('',#359433,#359233,#359466,.T.); +#359466 = LINE('',#359467,#359468); +#359467 = CARTESIAN_POINT('',(130.225,-110.5125,-4.E-02)); +#359468 = VECTOR('',#359469,1.); +#359469 = DIRECTION('',(0.,1.,0.)); +#359470 = ORIENTED_EDGE('',*,*,#359230,.F.); +#359471 = ORIENTED_EDGE('',*,*,#359472,.F.); +#359472 = EDGE_CURVE('',#359442,#359231,#359473,.T.); +#359473 = LINE('',#359474,#359475); +#359474 = CARTESIAN_POINT('',(130.225,-110.5125,0.)); +#359475 = VECTOR('',#359476,1.); +#359476 = DIRECTION('',(0.,1.,0.)); +#359477 = PLANE('',#359478); +#359478 = AXIS2_PLACEMENT_3D('',#359479,#359480,#359481); +#359479 = CARTESIAN_POINT('',(130.225,-110.5125,0.)); +#359480 = DIRECTION('',(1.,-0.,0.)); +#359481 = DIRECTION('',(0.,1.,0.)); +#359482 = ADVANCED_FACE('',(#359483),#359493,.F.); +#359483 = FACE_BOUND('',#359484,.F.); +#359484 = EDGE_LOOP('',(#359485,#359486,#359487,#359488,#359489,#359490, + #359491,#359492)); +#359485 = ORIENTED_EDGE('',*,*,#359257,.T.); +#359486 = ORIENTED_EDGE('',*,*,#359289,.T.); +#359487 = ORIENTED_EDGE('',*,*,#359321,.T.); +#359488 = ORIENTED_EDGE('',*,*,#359353,.T.); +#359489 = ORIENTED_EDGE('',*,*,#359385,.T.); +#359490 = ORIENTED_EDGE('',*,*,#359417,.T.); +#359491 = ORIENTED_EDGE('',*,*,#359449,.T.); +#359492 = ORIENTED_EDGE('',*,*,#359472,.T.); +#359493 = PLANE('',#359494); +#359494 = AXIS2_PLACEMENT_3D('',#359495,#359496,#359497); +#359495 = CARTESIAN_POINT('',(0.,0.,0.)); +#359496 = DIRECTION('',(-0.,-0.,-1.)); +#359497 = DIRECTION('',(-1.,0.,0.)); +#359498 = ADVANCED_FACE('',(#359499),#359509,.T.); +#359499 = FACE_BOUND('',#359500,.T.); +#359500 = EDGE_LOOP('',(#359501,#359502,#359503,#359504,#359505,#359506, + #359507,#359508)); +#359501 = ORIENTED_EDGE('',*,*,#359240,.T.); +#359502 = ORIENTED_EDGE('',*,*,#359273,.T.); +#359503 = ORIENTED_EDGE('',*,*,#359304,.T.); +#359504 = ORIENTED_EDGE('',*,*,#359337,.T.); +#359505 = ORIENTED_EDGE('',*,*,#359368,.T.); +#359506 = ORIENTED_EDGE('',*,*,#359401,.T.); +#359507 = ORIENTED_EDGE('',*,*,#359432,.T.); +#359508 = ORIENTED_EDGE('',*,*,#359465,.T.); +#359509 = PLANE('',#359510); +#359510 = AXIS2_PLACEMENT_3D('',#359511,#359512,#359513); +#359511 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#359512 = DIRECTION('',(-0.,-0.,-1.)); +#359513 = DIRECTION('',(-1.,0.,0.)); +#359514 = MANIFOLD_SOLID_BREP('',#359515); +#359515 = CLOSED_SHELL('',(#359516,#359556,#359587,#359618,#359640, + #359652)); +#359516 = ADVANCED_FACE('',(#359517),#359551,.F.); +#359517 = FACE_BOUND('',#359518,.F.); +#359518 = EDGE_LOOP('',(#359519,#359529,#359537,#359545)); +#359519 = ORIENTED_EDGE('',*,*,#359520,.T.); +#359520 = EDGE_CURVE('',#359521,#359523,#359525,.T.); +#359521 = VERTEX_POINT('',#359522); +#359522 = CARTESIAN_POINT('',(127.3,-111.8,0.)); +#359523 = VERTEX_POINT('',#359524); +#359524 = CARTESIAN_POINT('',(127.3,-111.8,-4.E-02)); +#359525 = LINE('',#359526,#359527); +#359526 = CARTESIAN_POINT('',(127.3,-111.8,0.)); +#359527 = VECTOR('',#359528,1.); +#359528 = DIRECTION('',(0.,0.,-1.)); +#359529 = ORIENTED_EDGE('',*,*,#359530,.T.); +#359530 = EDGE_CURVE('',#359523,#359531,#359533,.T.); +#359531 = VERTEX_POINT('',#359532); +#359532 = CARTESIAN_POINT('',(127.3,-108.2,-4.E-02)); +#359533 = LINE('',#359534,#359535); +#359534 = CARTESIAN_POINT('',(127.3,-111.8,-4.E-02)); +#359535 = VECTOR('',#359536,1.); +#359536 = DIRECTION('',(0.,1.,0.)); +#359537 = ORIENTED_EDGE('',*,*,#359538,.F.); +#359538 = EDGE_CURVE('',#359539,#359531,#359541,.T.); +#359539 = VERTEX_POINT('',#359540); +#359540 = CARTESIAN_POINT('',(127.3,-108.2,0.)); +#359541 = LINE('',#359542,#359543); +#359542 = CARTESIAN_POINT('',(127.3,-108.2,0.)); +#359543 = VECTOR('',#359544,1.); +#359544 = DIRECTION('',(0.,0.,-1.)); +#359545 = ORIENTED_EDGE('',*,*,#359546,.F.); +#359546 = EDGE_CURVE('',#359521,#359539,#359547,.T.); +#359547 = LINE('',#359548,#359549); +#359548 = CARTESIAN_POINT('',(127.3,-111.8,0.)); +#359549 = VECTOR('',#359550,1.); +#359550 = DIRECTION('',(0.,1.,0.)); +#359551 = PLANE('',#359552); +#359552 = AXIS2_PLACEMENT_3D('',#359553,#359554,#359555); +#359553 = CARTESIAN_POINT('',(127.3,-111.8,0.)); +#359554 = DIRECTION('',(1.,-0.,0.)); +#359555 = DIRECTION('',(0.,1.,0.)); +#359556 = ADVANCED_FACE('',(#359557),#359582,.F.); +#359557 = FACE_BOUND('',#359558,.F.); +#359558 = EDGE_LOOP('',(#359559,#359560,#359568,#359576)); +#359559 = ORIENTED_EDGE('',*,*,#359538,.T.); +#359560 = ORIENTED_EDGE('',*,*,#359561,.T.); +#359561 = EDGE_CURVE('',#359531,#359562,#359564,.T.); +#359562 = VERTEX_POINT('',#359563); +#359563 = CARTESIAN_POINT('',(128.8,-108.2,-4.E-02)); +#359564 = LINE('',#359565,#359566); +#359565 = CARTESIAN_POINT('',(127.3,-108.2,-4.E-02)); +#359566 = VECTOR('',#359567,1.); +#359567 = DIRECTION('',(1.,0.,0.)); +#359568 = ORIENTED_EDGE('',*,*,#359569,.F.); +#359569 = EDGE_CURVE('',#359570,#359562,#359572,.T.); +#359570 = VERTEX_POINT('',#359571); +#359571 = CARTESIAN_POINT('',(128.8,-108.2,0.)); +#359572 = LINE('',#359573,#359574); +#359573 = CARTESIAN_POINT('',(128.8,-108.2,0.)); +#359574 = VECTOR('',#359575,1.); +#359575 = DIRECTION('',(0.,0.,-1.)); +#359576 = ORIENTED_EDGE('',*,*,#359577,.F.); +#359577 = EDGE_CURVE('',#359539,#359570,#359578,.T.); +#359578 = LINE('',#359579,#359580); +#359579 = CARTESIAN_POINT('',(127.3,-108.2,0.)); +#359580 = VECTOR('',#359581,1.); +#359581 = DIRECTION('',(1.,0.,0.)); +#359582 = PLANE('',#359583); +#359583 = AXIS2_PLACEMENT_3D('',#359584,#359585,#359586); +#359584 = CARTESIAN_POINT('',(127.3,-108.2,0.)); +#359585 = DIRECTION('',(0.,-1.,0.)); +#359586 = DIRECTION('',(1.,0.,0.)); +#359587 = ADVANCED_FACE('',(#359588),#359613,.F.); +#359588 = FACE_BOUND('',#359589,.F.); +#359589 = EDGE_LOOP('',(#359590,#359591,#359599,#359607)); +#359590 = ORIENTED_EDGE('',*,*,#359569,.T.); +#359591 = ORIENTED_EDGE('',*,*,#359592,.T.); +#359592 = EDGE_CURVE('',#359562,#359593,#359595,.T.); +#359593 = VERTEX_POINT('',#359594); +#359594 = CARTESIAN_POINT('',(128.8,-111.8,-4.E-02)); +#359595 = LINE('',#359596,#359597); +#359596 = CARTESIAN_POINT('',(128.8,-108.2,-4.E-02)); +#359597 = VECTOR('',#359598,1.); +#359598 = DIRECTION('',(0.,-1.,0.)); +#359599 = ORIENTED_EDGE('',*,*,#359600,.F.); +#359600 = EDGE_CURVE('',#359601,#359593,#359603,.T.); +#359601 = VERTEX_POINT('',#359602); +#359602 = CARTESIAN_POINT('',(128.8,-111.8,0.)); +#359603 = LINE('',#359604,#359605); +#359604 = CARTESIAN_POINT('',(128.8,-111.8,0.)); +#359605 = VECTOR('',#359606,1.); +#359606 = DIRECTION('',(0.,0.,-1.)); +#359607 = ORIENTED_EDGE('',*,*,#359608,.F.); +#359608 = EDGE_CURVE('',#359570,#359601,#359609,.T.); +#359609 = LINE('',#359610,#359611); +#359610 = CARTESIAN_POINT('',(128.8,-108.2,0.)); +#359611 = VECTOR('',#359612,1.); +#359612 = DIRECTION('',(0.,-1.,0.)); +#359613 = PLANE('',#359614); +#359614 = AXIS2_PLACEMENT_3D('',#359615,#359616,#359617); +#359615 = CARTESIAN_POINT('',(128.8,-108.2,0.)); +#359616 = DIRECTION('',(-1.,-0.,-0.)); +#359617 = DIRECTION('',(0.,-1.,0.)); +#359618 = ADVANCED_FACE('',(#359619),#359635,.F.); +#359619 = FACE_BOUND('',#359620,.F.); +#359620 = EDGE_LOOP('',(#359621,#359622,#359628,#359629)); +#359621 = ORIENTED_EDGE('',*,*,#359600,.T.); +#359622 = ORIENTED_EDGE('',*,*,#359623,.T.); +#359623 = EDGE_CURVE('',#359593,#359523,#359624,.T.); +#359624 = LINE('',#359625,#359626); +#359625 = CARTESIAN_POINT('',(128.8,-111.8,-4.E-02)); +#359626 = VECTOR('',#359627,1.); +#359627 = DIRECTION('',(-1.,0.,0.)); +#359628 = ORIENTED_EDGE('',*,*,#359520,.F.); +#359629 = ORIENTED_EDGE('',*,*,#359630,.F.); +#359630 = EDGE_CURVE('',#359601,#359521,#359631,.T.); +#359631 = LINE('',#359632,#359633); +#359632 = CARTESIAN_POINT('',(128.8,-111.8,0.)); +#359633 = VECTOR('',#359634,1.); +#359634 = DIRECTION('',(-1.,0.,0.)); +#359635 = PLANE('',#359636); +#359636 = AXIS2_PLACEMENT_3D('',#359637,#359638,#359639); +#359637 = CARTESIAN_POINT('',(128.8,-111.8,0.)); +#359638 = DIRECTION('',(0.,1.,0.)); +#359639 = DIRECTION('',(-1.,0.,0.)); +#359640 = ADVANCED_FACE('',(#359641),#359647,.F.); +#359641 = FACE_BOUND('',#359642,.F.); +#359642 = EDGE_LOOP('',(#359643,#359644,#359645,#359646)); +#359643 = ORIENTED_EDGE('',*,*,#359546,.T.); +#359644 = ORIENTED_EDGE('',*,*,#359577,.T.); +#359645 = ORIENTED_EDGE('',*,*,#359608,.T.); +#359646 = ORIENTED_EDGE('',*,*,#359630,.T.); +#359647 = PLANE('',#359648); +#359648 = AXIS2_PLACEMENT_3D('',#359649,#359650,#359651); +#359649 = CARTESIAN_POINT('',(0.,0.,0.)); +#359650 = DIRECTION('',(-0.,-0.,-1.)); +#359651 = DIRECTION('',(-1.,0.,0.)); +#359652 = ADVANCED_FACE('',(#359653),#359659,.T.); +#359653 = FACE_BOUND('',#359654,.T.); +#359654 = EDGE_LOOP('',(#359655,#359656,#359657,#359658)); +#359655 = ORIENTED_EDGE('',*,*,#359530,.T.); +#359656 = ORIENTED_EDGE('',*,*,#359561,.T.); +#359657 = ORIENTED_EDGE('',*,*,#359592,.T.); +#359658 = ORIENTED_EDGE('',*,*,#359623,.T.); +#359659 = PLANE('',#359660); +#359660 = AXIS2_PLACEMENT_3D('',#359661,#359662,#359663); +#359661 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#359662 = DIRECTION('',(-0.,-0.,-1.)); +#359663 = DIRECTION('',(-1.,0.,0.)); +#359664 = MANIFOLD_SOLID_BREP('',#359665); +#359665 = CLOSED_SHELL('',(#359666,#359708,#359739,#359772,#359803, + #359836,#359867,#359900,#359922,#359938)); +#359666 = ADVANCED_FACE('',(#359667),#359703,.T.); +#359667 = FACE_BOUND('',#359668,.F.); +#359668 = EDGE_LOOP('',(#359669,#359679,#359688,#359696)); +#359669 = ORIENTED_EDGE('',*,*,#359670,.T.); +#359670 = EDGE_CURVE('',#359671,#359673,#359675,.T.); +#359671 = VERTEX_POINT('',#359672); +#359672 = CARTESIAN_POINT('',(149.7625,-116.85,0.)); +#359673 = VERTEX_POINT('',#359674); +#359674 = CARTESIAN_POINT('',(149.7625,-116.85,-4.E-02)); +#359675 = LINE('',#359676,#359677); +#359676 = CARTESIAN_POINT('',(149.7625,-116.85,0.)); +#359677 = VECTOR('',#359678,1.); +#359678 = DIRECTION('',(0.,0.,-1.)); +#359679 = ORIENTED_EDGE('',*,*,#359680,.T.); +#359680 = EDGE_CURVE('',#359673,#359681,#359683,.T.); +#359681 = VERTEX_POINT('',#359682); +#359682 = CARTESIAN_POINT('',(149.9125,-116.7,-4.E-02)); +#359683 = CIRCLE('',#359684,0.150000058649); +#359684 = AXIS2_PLACEMENT_3D('',#359685,#359686,#359687); +#359685 = CARTESIAN_POINT('',(149.91250005864,-116.8500000586,-4.E-02)); +#359686 = DIRECTION('',(0.,0.,-1.)); +#359687 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#359688 = ORIENTED_EDGE('',*,*,#359689,.F.); +#359689 = EDGE_CURVE('',#359690,#359681,#359692,.T.); +#359690 = VERTEX_POINT('',#359691); +#359691 = CARTESIAN_POINT('',(149.9125,-116.7,0.)); +#359692 = LINE('',#359693,#359694); +#359693 = CARTESIAN_POINT('',(149.9125,-116.7,0.)); +#359694 = VECTOR('',#359695,1.); +#359695 = DIRECTION('',(0.,0.,-1.)); +#359696 = ORIENTED_EDGE('',*,*,#359697,.F.); +#359697 = EDGE_CURVE('',#359671,#359690,#359698,.T.); +#359698 = CIRCLE('',#359699,0.150000058649); +#359699 = AXIS2_PLACEMENT_3D('',#359700,#359701,#359702); +#359700 = CARTESIAN_POINT('',(149.91250005864,-116.8500000586,0.)); +#359701 = DIRECTION('',(0.,0.,-1.)); +#359702 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#359703 = CYLINDRICAL_SURFACE('',#359704,0.150000058649); +#359704 = AXIS2_PLACEMENT_3D('',#359705,#359706,#359707); +#359705 = CARTESIAN_POINT('',(149.91250005864,-116.8500000586,0.)); +#359706 = DIRECTION('',(-0.,-0.,1.)); +#359707 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#359708 = ADVANCED_FACE('',(#359709),#359734,.F.); +#359709 = FACE_BOUND('',#359710,.F.); +#359710 = EDGE_LOOP('',(#359711,#359712,#359720,#359728)); +#359711 = ORIENTED_EDGE('',*,*,#359689,.T.); +#359712 = ORIENTED_EDGE('',*,*,#359713,.T.); +#359713 = EDGE_CURVE('',#359681,#359714,#359716,.T.); +#359714 = VERTEX_POINT('',#359715); +#359715 = CARTESIAN_POINT('',(151.0875,-116.7,-4.E-02)); +#359716 = LINE('',#359717,#359718); +#359717 = CARTESIAN_POINT('',(149.9125,-116.7,-4.E-02)); +#359718 = VECTOR('',#359719,1.); +#359719 = DIRECTION('',(1.,0.,0.)); +#359720 = ORIENTED_EDGE('',*,*,#359721,.F.); +#359721 = EDGE_CURVE('',#359722,#359714,#359724,.T.); +#359722 = VERTEX_POINT('',#359723); +#359723 = CARTESIAN_POINT('',(151.0875,-116.7,0.)); +#359724 = LINE('',#359725,#359726); +#359725 = CARTESIAN_POINT('',(151.0875,-116.7,0.)); +#359726 = VECTOR('',#359727,1.); +#359727 = DIRECTION('',(0.,0.,-1.)); +#359728 = ORIENTED_EDGE('',*,*,#359729,.F.); +#359729 = EDGE_CURVE('',#359690,#359722,#359730,.T.); +#359730 = LINE('',#359731,#359732); +#359731 = CARTESIAN_POINT('',(149.9125,-116.7,0.)); +#359732 = VECTOR('',#359733,1.); +#359733 = DIRECTION('',(1.,0.,0.)); +#359734 = PLANE('',#359735); +#359735 = AXIS2_PLACEMENT_3D('',#359736,#359737,#359738); +#359736 = CARTESIAN_POINT('',(149.9125,-116.7,0.)); +#359737 = DIRECTION('',(0.,-1.,0.)); +#359738 = DIRECTION('',(1.,0.,0.)); +#359739 = ADVANCED_FACE('',(#359740),#359767,.T.); +#359740 = FACE_BOUND('',#359741,.F.); +#359741 = EDGE_LOOP('',(#359742,#359743,#359752,#359760)); +#359742 = ORIENTED_EDGE('',*,*,#359721,.T.); +#359743 = ORIENTED_EDGE('',*,*,#359744,.T.); +#359744 = EDGE_CURVE('',#359714,#359745,#359747,.T.); +#359745 = VERTEX_POINT('',#359746); +#359746 = CARTESIAN_POINT('',(151.2375,-116.85,-4.E-02)); +#359747 = CIRCLE('',#359748,0.150000058649); +#359748 = AXIS2_PLACEMENT_3D('',#359749,#359750,#359751); +#359749 = CARTESIAN_POINT('',(151.08749994135,-116.8500000586,-4.E-02)); +#359750 = DIRECTION('',(0.,0.,-1.)); +#359751 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#359752 = ORIENTED_EDGE('',*,*,#359753,.F.); +#359753 = EDGE_CURVE('',#359754,#359745,#359756,.T.); +#359754 = VERTEX_POINT('',#359755); +#359755 = CARTESIAN_POINT('',(151.2375,-116.85,0.)); +#359756 = LINE('',#359757,#359758); +#359757 = CARTESIAN_POINT('',(151.2375,-116.85,0.)); +#359758 = VECTOR('',#359759,1.); +#359759 = DIRECTION('',(0.,0.,-1.)); +#359760 = ORIENTED_EDGE('',*,*,#359761,.F.); +#359761 = EDGE_CURVE('',#359722,#359754,#359762,.T.); +#359762 = CIRCLE('',#359763,0.150000058649); +#359763 = AXIS2_PLACEMENT_3D('',#359764,#359765,#359766); +#359764 = CARTESIAN_POINT('',(151.08749994135,-116.8500000586,0.)); +#359765 = DIRECTION('',(0.,0.,-1.)); +#359766 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#359767 = CYLINDRICAL_SURFACE('',#359768,0.150000058649); +#359768 = AXIS2_PLACEMENT_3D('',#359769,#359770,#359771); +#359769 = CARTESIAN_POINT('',(151.08749994135,-116.8500000586,0.)); +#359770 = DIRECTION('',(-0.,-0.,1.)); +#359771 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#359772 = ADVANCED_FACE('',(#359773),#359798,.F.); +#359773 = FACE_BOUND('',#359774,.F.); +#359774 = EDGE_LOOP('',(#359775,#359776,#359784,#359792)); +#359775 = ORIENTED_EDGE('',*,*,#359753,.T.); +#359776 = ORIENTED_EDGE('',*,*,#359777,.T.); +#359777 = EDGE_CURVE('',#359745,#359778,#359780,.T.); +#359778 = VERTEX_POINT('',#359779); +#359779 = CARTESIAN_POINT('',(151.2375,-117.15,-4.E-02)); +#359780 = LINE('',#359781,#359782); +#359781 = CARTESIAN_POINT('',(151.2375,-116.85,-4.E-02)); +#359782 = VECTOR('',#359783,1.); +#359783 = DIRECTION('',(0.,-1.,0.)); +#359784 = ORIENTED_EDGE('',*,*,#359785,.F.); +#359785 = EDGE_CURVE('',#359786,#359778,#359788,.T.); +#359786 = VERTEX_POINT('',#359787); +#359787 = CARTESIAN_POINT('',(151.2375,-117.15,0.)); +#359788 = LINE('',#359789,#359790); +#359789 = CARTESIAN_POINT('',(151.2375,-117.15,0.)); +#359790 = VECTOR('',#359791,1.); +#359791 = DIRECTION('',(0.,0.,-1.)); +#359792 = ORIENTED_EDGE('',*,*,#359793,.F.); +#359793 = EDGE_CURVE('',#359754,#359786,#359794,.T.); +#359794 = LINE('',#359795,#359796); +#359795 = CARTESIAN_POINT('',(151.2375,-116.85,0.)); +#359796 = VECTOR('',#359797,1.); +#359797 = DIRECTION('',(0.,-1.,0.)); +#359798 = PLANE('',#359799); +#359799 = AXIS2_PLACEMENT_3D('',#359800,#359801,#359802); +#359800 = CARTESIAN_POINT('',(151.2375,-116.85,0.)); +#359801 = DIRECTION('',(-1.,-0.,-0.)); +#359802 = DIRECTION('',(0.,-1.,0.)); +#359803 = ADVANCED_FACE('',(#359804),#359831,.T.); +#359804 = FACE_BOUND('',#359805,.F.); +#359805 = EDGE_LOOP('',(#359806,#359807,#359816,#359824)); +#359806 = ORIENTED_EDGE('',*,*,#359785,.T.); +#359807 = ORIENTED_EDGE('',*,*,#359808,.T.); +#359808 = EDGE_CURVE('',#359778,#359809,#359811,.T.); +#359809 = VERTEX_POINT('',#359810); +#359810 = CARTESIAN_POINT('',(151.0875,-117.3,-4.E-02)); +#359811 = CIRCLE('',#359812,0.150000058649); +#359812 = AXIS2_PLACEMENT_3D('',#359813,#359814,#359815); +#359813 = CARTESIAN_POINT('',(151.08749994135,-117.1499999413,-4.E-02)); +#359814 = DIRECTION('',(0.,0.,-1.)); +#359815 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#359816 = ORIENTED_EDGE('',*,*,#359817,.F.); +#359817 = EDGE_CURVE('',#359818,#359809,#359820,.T.); +#359818 = VERTEX_POINT('',#359819); +#359819 = CARTESIAN_POINT('',(151.0875,-117.3,0.)); +#359820 = LINE('',#359821,#359822); +#359821 = CARTESIAN_POINT('',(151.0875,-117.3,0.)); +#359822 = VECTOR('',#359823,1.); +#359823 = DIRECTION('',(0.,0.,-1.)); +#359824 = ORIENTED_EDGE('',*,*,#359825,.F.); +#359825 = EDGE_CURVE('',#359786,#359818,#359826,.T.); +#359826 = CIRCLE('',#359827,0.150000058649); +#359827 = AXIS2_PLACEMENT_3D('',#359828,#359829,#359830); +#359828 = CARTESIAN_POINT('',(151.08749994135,-117.1499999413,0.)); +#359829 = DIRECTION('',(0.,0.,-1.)); +#359830 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#359831 = CYLINDRICAL_SURFACE('',#359832,0.150000058649); +#359832 = AXIS2_PLACEMENT_3D('',#359833,#359834,#359835); +#359833 = CARTESIAN_POINT('',(151.08749994135,-117.1499999413,0.)); +#359834 = DIRECTION('',(-0.,-0.,1.)); +#359835 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#359836 = ADVANCED_FACE('',(#359837),#359862,.F.); +#359837 = FACE_BOUND('',#359838,.F.); +#359838 = EDGE_LOOP('',(#359839,#359840,#359848,#359856)); +#359839 = ORIENTED_EDGE('',*,*,#359817,.T.); +#359840 = ORIENTED_EDGE('',*,*,#359841,.T.); +#359841 = EDGE_CURVE('',#359809,#359842,#359844,.T.); +#359842 = VERTEX_POINT('',#359843); +#359843 = CARTESIAN_POINT('',(149.9125,-117.3,-4.E-02)); +#359844 = LINE('',#359845,#359846); +#359845 = CARTESIAN_POINT('',(151.0875,-117.3,-4.E-02)); +#359846 = VECTOR('',#359847,1.); +#359847 = DIRECTION('',(-1.,0.,0.)); +#359848 = ORIENTED_EDGE('',*,*,#359849,.F.); +#359849 = EDGE_CURVE('',#359850,#359842,#359852,.T.); +#359850 = VERTEX_POINT('',#359851); +#359851 = CARTESIAN_POINT('',(149.9125,-117.3,0.)); +#359852 = LINE('',#359853,#359854); +#359853 = CARTESIAN_POINT('',(149.9125,-117.3,0.)); +#359854 = VECTOR('',#359855,1.); +#359855 = DIRECTION('',(0.,0.,-1.)); +#359856 = ORIENTED_EDGE('',*,*,#359857,.F.); +#359857 = EDGE_CURVE('',#359818,#359850,#359858,.T.); +#359858 = LINE('',#359859,#359860); +#359859 = CARTESIAN_POINT('',(151.0875,-117.3,0.)); +#359860 = VECTOR('',#359861,1.); +#359861 = DIRECTION('',(-1.,0.,0.)); +#359862 = PLANE('',#359863); +#359863 = AXIS2_PLACEMENT_3D('',#359864,#359865,#359866); +#359864 = CARTESIAN_POINT('',(151.0875,-117.3,0.)); +#359865 = DIRECTION('',(0.,1.,0.)); +#359866 = DIRECTION('',(-1.,0.,0.)); +#359867 = ADVANCED_FACE('',(#359868),#359895,.T.); +#359868 = FACE_BOUND('',#359869,.F.); +#359869 = EDGE_LOOP('',(#359870,#359871,#359880,#359888)); +#359870 = ORIENTED_EDGE('',*,*,#359849,.T.); +#359871 = ORIENTED_EDGE('',*,*,#359872,.T.); +#359872 = EDGE_CURVE('',#359842,#359873,#359875,.T.); +#359873 = VERTEX_POINT('',#359874); +#359874 = CARTESIAN_POINT('',(149.7625,-117.15,-4.E-02)); +#359875 = CIRCLE('',#359876,0.150000058649); +#359876 = AXIS2_PLACEMENT_3D('',#359877,#359878,#359879); +#359877 = CARTESIAN_POINT('',(149.91250005864,-117.1499999413,-4.E-02)); +#359878 = DIRECTION('',(0.,0.,-1.)); +#359879 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#359880 = ORIENTED_EDGE('',*,*,#359881,.F.); +#359881 = EDGE_CURVE('',#359882,#359873,#359884,.T.); +#359882 = VERTEX_POINT('',#359883); +#359883 = CARTESIAN_POINT('',(149.7625,-117.15,0.)); +#359884 = LINE('',#359885,#359886); +#359885 = CARTESIAN_POINT('',(149.7625,-117.15,0.)); +#359886 = VECTOR('',#359887,1.); +#359887 = DIRECTION('',(0.,0.,-1.)); +#359888 = ORIENTED_EDGE('',*,*,#359889,.F.); +#359889 = EDGE_CURVE('',#359850,#359882,#359890,.T.); +#359890 = CIRCLE('',#359891,0.150000058649); +#359891 = AXIS2_PLACEMENT_3D('',#359892,#359893,#359894); +#359892 = CARTESIAN_POINT('',(149.91250005864,-117.1499999413,0.)); +#359893 = DIRECTION('',(0.,0.,-1.)); +#359894 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#359895 = CYLINDRICAL_SURFACE('',#359896,0.150000058649); +#359896 = AXIS2_PLACEMENT_3D('',#359897,#359898,#359899); +#359897 = CARTESIAN_POINT('',(149.91250005864,-117.1499999413,0.)); +#359898 = DIRECTION('',(-0.,-0.,1.)); +#359899 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#359900 = ADVANCED_FACE('',(#359901),#359917,.F.); +#359901 = FACE_BOUND('',#359902,.F.); +#359902 = EDGE_LOOP('',(#359903,#359904,#359910,#359911)); +#359903 = ORIENTED_EDGE('',*,*,#359881,.T.); +#359904 = ORIENTED_EDGE('',*,*,#359905,.T.); +#359905 = EDGE_CURVE('',#359873,#359673,#359906,.T.); +#359906 = LINE('',#359907,#359908); +#359907 = CARTESIAN_POINT('',(149.7625,-117.15,-4.E-02)); +#359908 = VECTOR('',#359909,1.); +#359909 = DIRECTION('',(0.,1.,0.)); +#359910 = ORIENTED_EDGE('',*,*,#359670,.F.); +#359911 = ORIENTED_EDGE('',*,*,#359912,.F.); +#359912 = EDGE_CURVE('',#359882,#359671,#359913,.T.); +#359913 = LINE('',#359914,#359915); +#359914 = CARTESIAN_POINT('',(149.7625,-117.15,0.)); +#359915 = VECTOR('',#359916,1.); +#359916 = DIRECTION('',(0.,1.,0.)); +#359917 = PLANE('',#359918); +#359918 = AXIS2_PLACEMENT_3D('',#359919,#359920,#359921); +#359919 = CARTESIAN_POINT('',(149.7625,-117.15,0.)); +#359920 = DIRECTION('',(1.,-0.,0.)); +#359921 = DIRECTION('',(0.,1.,0.)); +#359922 = ADVANCED_FACE('',(#359923),#359933,.F.); +#359923 = FACE_BOUND('',#359924,.F.); +#359924 = EDGE_LOOP('',(#359925,#359926,#359927,#359928,#359929,#359930, + #359931,#359932)); +#359925 = ORIENTED_EDGE('',*,*,#359697,.T.); +#359926 = ORIENTED_EDGE('',*,*,#359729,.T.); +#359927 = ORIENTED_EDGE('',*,*,#359761,.T.); +#359928 = ORIENTED_EDGE('',*,*,#359793,.T.); +#359929 = ORIENTED_EDGE('',*,*,#359825,.T.); +#359930 = ORIENTED_EDGE('',*,*,#359857,.T.); +#359931 = ORIENTED_EDGE('',*,*,#359889,.T.); +#359932 = ORIENTED_EDGE('',*,*,#359912,.T.); +#359933 = PLANE('',#359934); +#359934 = AXIS2_PLACEMENT_3D('',#359935,#359936,#359937); +#359935 = CARTESIAN_POINT('',(0.,0.,0.)); +#359936 = DIRECTION('',(-0.,-0.,-1.)); +#359937 = DIRECTION('',(-1.,0.,0.)); +#359938 = ADVANCED_FACE('',(#359939),#359949,.T.); +#359939 = FACE_BOUND('',#359940,.T.); +#359940 = EDGE_LOOP('',(#359941,#359942,#359943,#359944,#359945,#359946, + #359947,#359948)); +#359941 = ORIENTED_EDGE('',*,*,#359680,.T.); +#359942 = ORIENTED_EDGE('',*,*,#359713,.T.); +#359943 = ORIENTED_EDGE('',*,*,#359744,.T.); +#359944 = ORIENTED_EDGE('',*,*,#359777,.T.); +#359945 = ORIENTED_EDGE('',*,*,#359808,.T.); +#359946 = ORIENTED_EDGE('',*,*,#359841,.T.); +#359947 = ORIENTED_EDGE('',*,*,#359872,.T.); +#359948 = ORIENTED_EDGE('',*,*,#359905,.T.); +#359949 = PLANE('',#359950); +#359950 = AXIS2_PLACEMENT_3D('',#359951,#359952,#359953); +#359951 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#359952 = DIRECTION('',(-0.,-0.,-1.)); +#359953 = DIRECTION('',(-1.,0.,0.)); +#359954 = MANIFOLD_SOLID_BREP('',#359955); +#359955 = CLOSED_SHELL('',(#359956,#359998,#360029,#360062,#360093, + #360126,#360157,#360190,#360212,#360228)); +#359956 = ADVANCED_FACE('',(#359957),#359993,.T.); +#359957 = FACE_BOUND('',#359958,.F.); +#359958 = EDGE_LOOP('',(#359959,#359969,#359978,#359986)); +#359959 = ORIENTED_EDGE('',*,*,#359960,.T.); +#359960 = EDGE_CURVE('',#359961,#359963,#359965,.T.); +#359961 = VERTEX_POINT('',#359962); +#359962 = CARTESIAN_POINT('',(151.48,-114.725,0.)); +#359963 = VERTEX_POINT('',#359964); +#359964 = CARTESIAN_POINT('',(151.48,-114.725,-4.E-02)); +#359965 = LINE('',#359966,#359967); +#359966 = CARTESIAN_POINT('',(151.48,-114.725,0.)); +#359967 = VECTOR('',#359968,1.); +#359968 = DIRECTION('',(0.,0.,-1.)); +#359969 = ORIENTED_EDGE('',*,*,#359970,.T.); +#359970 = EDGE_CURVE('',#359963,#359971,#359973,.T.); +#359971 = VERTEX_POINT('',#359972); +#359972 = CARTESIAN_POINT('',(151.615,-114.59,-4.E-02)); +#359973 = CIRCLE('',#359974,0.135001418495); +#359974 = AXIS2_PLACEMENT_3D('',#359975,#359976,#359977); +#359975 = CARTESIAN_POINT('',(151.61500141848,-114.7250014184,-4.E-02)); +#359976 = DIRECTION('',(0.,0.,-1.)); +#359977 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#359978 = ORIENTED_EDGE('',*,*,#359979,.F.); +#359979 = EDGE_CURVE('',#359980,#359971,#359982,.T.); +#359980 = VERTEX_POINT('',#359981); +#359981 = CARTESIAN_POINT('',(151.615,-114.59,0.)); +#359982 = LINE('',#359983,#359984); +#359983 = CARTESIAN_POINT('',(151.615,-114.59,0.)); +#359984 = VECTOR('',#359985,1.); +#359985 = DIRECTION('',(0.,0.,-1.)); +#359986 = ORIENTED_EDGE('',*,*,#359987,.F.); +#359987 = EDGE_CURVE('',#359961,#359980,#359988,.T.); +#359988 = CIRCLE('',#359989,0.135001418495); +#359989 = AXIS2_PLACEMENT_3D('',#359990,#359991,#359992); +#359990 = CARTESIAN_POINT('',(151.61500141848,-114.7250014184,0.)); +#359991 = DIRECTION('',(0.,0.,-1.)); +#359992 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#359993 = CYLINDRICAL_SURFACE('',#359994,0.135001418495); +#359994 = AXIS2_PLACEMENT_3D('',#359995,#359996,#359997); +#359995 = CARTESIAN_POINT('',(151.61500141848,-114.7250014184,0.)); +#359996 = DIRECTION('',(-0.,-0.,1.)); +#359997 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#359998 = ADVANCED_FACE('',(#359999),#360024,.F.); +#359999 = FACE_BOUND('',#360000,.F.); +#360000 = EDGE_LOOP('',(#360001,#360002,#360010,#360018)); +#360001 = ORIENTED_EDGE('',*,*,#359979,.T.); +#360002 = ORIENTED_EDGE('',*,*,#360003,.T.); +#360003 = EDGE_CURVE('',#359971,#360004,#360006,.T.); +#360004 = VERTEX_POINT('',#360005); +#360005 = CARTESIAN_POINT('',(151.985,-114.59,-4.E-02)); +#360006 = LINE('',#360007,#360008); +#360007 = CARTESIAN_POINT('',(151.615,-114.59,-4.E-02)); +#360008 = VECTOR('',#360009,1.); +#360009 = DIRECTION('',(1.,0.,0.)); +#360010 = ORIENTED_EDGE('',*,*,#360011,.F.); +#360011 = EDGE_CURVE('',#360012,#360004,#360014,.T.); +#360012 = VERTEX_POINT('',#360013); +#360013 = CARTESIAN_POINT('',(151.985,-114.59,0.)); +#360014 = LINE('',#360015,#360016); +#360015 = CARTESIAN_POINT('',(151.985,-114.59,0.)); +#360016 = VECTOR('',#360017,1.); +#360017 = DIRECTION('',(0.,0.,-1.)); +#360018 = ORIENTED_EDGE('',*,*,#360019,.F.); +#360019 = EDGE_CURVE('',#359980,#360012,#360020,.T.); +#360020 = LINE('',#360021,#360022); +#360021 = CARTESIAN_POINT('',(151.615,-114.59,0.)); +#360022 = VECTOR('',#360023,1.); +#360023 = DIRECTION('',(1.,0.,0.)); +#360024 = PLANE('',#360025); +#360025 = AXIS2_PLACEMENT_3D('',#360026,#360027,#360028); +#360026 = CARTESIAN_POINT('',(151.615,-114.59,0.)); +#360027 = DIRECTION('',(0.,-1.,0.)); +#360028 = DIRECTION('',(1.,0.,0.)); +#360029 = ADVANCED_FACE('',(#360030),#360057,.T.); +#360030 = FACE_BOUND('',#360031,.F.); +#360031 = EDGE_LOOP('',(#360032,#360033,#360042,#360050)); +#360032 = ORIENTED_EDGE('',*,*,#360011,.T.); +#360033 = ORIENTED_EDGE('',*,*,#360034,.T.); +#360034 = EDGE_CURVE('',#360004,#360035,#360037,.T.); +#360035 = VERTEX_POINT('',#360036); +#360036 = CARTESIAN_POINT('',(152.12,-114.725,-4.E-02)); +#360037 = CIRCLE('',#360038,0.135001418495); +#360038 = AXIS2_PLACEMENT_3D('',#360039,#360040,#360041); +#360039 = CARTESIAN_POINT('',(151.98499858151,-114.7250014184,-4.E-02)); +#360040 = DIRECTION('',(0.,0.,-1.)); +#360041 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#360042 = ORIENTED_EDGE('',*,*,#360043,.F.); +#360043 = EDGE_CURVE('',#360044,#360035,#360046,.T.); +#360044 = VERTEX_POINT('',#360045); +#360045 = CARTESIAN_POINT('',(152.12,-114.725,0.)); +#360046 = LINE('',#360047,#360048); +#360047 = CARTESIAN_POINT('',(152.12,-114.725,0.)); +#360048 = VECTOR('',#360049,1.); +#360049 = DIRECTION('',(0.,0.,-1.)); +#360050 = ORIENTED_EDGE('',*,*,#360051,.F.); +#360051 = EDGE_CURVE('',#360012,#360044,#360052,.T.); +#360052 = CIRCLE('',#360053,0.135001418495); +#360053 = AXIS2_PLACEMENT_3D('',#360054,#360055,#360056); +#360054 = CARTESIAN_POINT('',(151.98499858151,-114.7250014184,0.)); +#360055 = DIRECTION('',(0.,0.,-1.)); +#360056 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#360057 = CYLINDRICAL_SURFACE('',#360058,0.135001418495); +#360058 = AXIS2_PLACEMENT_3D('',#360059,#360060,#360061); +#360059 = CARTESIAN_POINT('',(151.98499858151,-114.7250014184,0.)); +#360060 = DIRECTION('',(-0.,-0.,1.)); +#360061 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#360062 = ADVANCED_FACE('',(#360063),#360088,.F.); +#360063 = FACE_BOUND('',#360064,.F.); +#360064 = EDGE_LOOP('',(#360065,#360066,#360074,#360082)); +#360065 = ORIENTED_EDGE('',*,*,#360043,.T.); +#360066 = ORIENTED_EDGE('',*,*,#360067,.T.); +#360067 = EDGE_CURVE('',#360035,#360068,#360070,.T.); +#360068 = VERTEX_POINT('',#360069); +#360069 = CARTESIAN_POINT('',(152.12,-114.995,-4.E-02)); +#360070 = LINE('',#360071,#360072); +#360071 = CARTESIAN_POINT('',(152.12,-114.725,-4.E-02)); +#360072 = VECTOR('',#360073,1.); +#360073 = DIRECTION('',(0.,-1.,0.)); +#360074 = ORIENTED_EDGE('',*,*,#360075,.F.); +#360075 = EDGE_CURVE('',#360076,#360068,#360078,.T.); +#360076 = VERTEX_POINT('',#360077); +#360077 = CARTESIAN_POINT('',(152.12,-114.995,0.)); +#360078 = LINE('',#360079,#360080); +#360079 = CARTESIAN_POINT('',(152.12,-114.995,0.)); +#360080 = VECTOR('',#360081,1.); +#360081 = DIRECTION('',(0.,0.,-1.)); +#360082 = ORIENTED_EDGE('',*,*,#360083,.F.); +#360083 = EDGE_CURVE('',#360044,#360076,#360084,.T.); +#360084 = LINE('',#360085,#360086); +#360085 = CARTESIAN_POINT('',(152.12,-114.725,0.)); +#360086 = VECTOR('',#360087,1.); +#360087 = DIRECTION('',(0.,-1.,0.)); +#360088 = PLANE('',#360089); +#360089 = AXIS2_PLACEMENT_3D('',#360090,#360091,#360092); +#360090 = CARTESIAN_POINT('',(152.12,-114.725,0.)); +#360091 = DIRECTION('',(-1.,-0.,-0.)); +#360092 = DIRECTION('',(0.,-1.,0.)); +#360093 = ADVANCED_FACE('',(#360094),#360121,.T.); +#360094 = FACE_BOUND('',#360095,.F.); +#360095 = EDGE_LOOP('',(#360096,#360097,#360106,#360114)); +#360096 = ORIENTED_EDGE('',*,*,#360075,.T.); +#360097 = ORIENTED_EDGE('',*,*,#360098,.T.); +#360098 = EDGE_CURVE('',#360068,#360099,#360101,.T.); +#360099 = VERTEX_POINT('',#360100); +#360100 = CARTESIAN_POINT('',(151.985,-115.13,-4.E-02)); +#360101 = CIRCLE('',#360102,0.135001418495); +#360102 = AXIS2_PLACEMENT_3D('',#360103,#360104,#360105); +#360103 = CARTESIAN_POINT('',(151.98499858151,-114.9949985815,-4.E-02)); +#360104 = DIRECTION('',(0.,0.,-1.)); +#360105 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#360106 = ORIENTED_EDGE('',*,*,#360107,.F.); +#360107 = EDGE_CURVE('',#360108,#360099,#360110,.T.); +#360108 = VERTEX_POINT('',#360109); +#360109 = CARTESIAN_POINT('',(151.985,-115.13,0.)); +#360110 = LINE('',#360111,#360112); +#360111 = CARTESIAN_POINT('',(151.985,-115.13,0.)); +#360112 = VECTOR('',#360113,1.); +#360113 = DIRECTION('',(0.,0.,-1.)); +#360114 = ORIENTED_EDGE('',*,*,#360115,.F.); +#360115 = EDGE_CURVE('',#360076,#360108,#360116,.T.); +#360116 = CIRCLE('',#360117,0.135001418495); +#360117 = AXIS2_PLACEMENT_3D('',#360118,#360119,#360120); +#360118 = CARTESIAN_POINT('',(151.98499858151,-114.9949985815,0.)); +#360119 = DIRECTION('',(0.,0.,-1.)); +#360120 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#360121 = CYLINDRICAL_SURFACE('',#360122,0.135001418495); +#360122 = AXIS2_PLACEMENT_3D('',#360123,#360124,#360125); +#360123 = CARTESIAN_POINT('',(151.98499858151,-114.9949985815,0.)); +#360124 = DIRECTION('',(-0.,-0.,1.)); +#360125 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#360126 = ADVANCED_FACE('',(#360127),#360152,.F.); +#360127 = FACE_BOUND('',#360128,.F.); +#360128 = EDGE_LOOP('',(#360129,#360130,#360138,#360146)); +#360129 = ORIENTED_EDGE('',*,*,#360107,.T.); +#360130 = ORIENTED_EDGE('',*,*,#360131,.T.); +#360131 = EDGE_CURVE('',#360099,#360132,#360134,.T.); +#360132 = VERTEX_POINT('',#360133); +#360133 = CARTESIAN_POINT('',(151.615,-115.13,-4.E-02)); +#360134 = LINE('',#360135,#360136); +#360135 = CARTESIAN_POINT('',(151.985,-115.13,-4.E-02)); +#360136 = VECTOR('',#360137,1.); +#360137 = DIRECTION('',(-1.,0.,0.)); +#360138 = ORIENTED_EDGE('',*,*,#360139,.F.); +#360139 = EDGE_CURVE('',#360140,#360132,#360142,.T.); +#360140 = VERTEX_POINT('',#360141); +#360141 = CARTESIAN_POINT('',(151.615,-115.13,0.)); +#360142 = LINE('',#360143,#360144); +#360143 = CARTESIAN_POINT('',(151.615,-115.13,0.)); +#360144 = VECTOR('',#360145,1.); +#360145 = DIRECTION('',(0.,0.,-1.)); +#360146 = ORIENTED_EDGE('',*,*,#360147,.F.); +#360147 = EDGE_CURVE('',#360108,#360140,#360148,.T.); +#360148 = LINE('',#360149,#360150); +#360149 = CARTESIAN_POINT('',(151.985,-115.13,0.)); +#360150 = VECTOR('',#360151,1.); +#360151 = DIRECTION('',(-1.,0.,0.)); +#360152 = PLANE('',#360153); +#360153 = AXIS2_PLACEMENT_3D('',#360154,#360155,#360156); +#360154 = CARTESIAN_POINT('',(151.985,-115.13,0.)); +#360155 = DIRECTION('',(0.,1.,0.)); +#360156 = DIRECTION('',(-1.,0.,0.)); +#360157 = ADVANCED_FACE('',(#360158),#360185,.T.); +#360158 = FACE_BOUND('',#360159,.F.); +#360159 = EDGE_LOOP('',(#360160,#360161,#360170,#360178)); +#360160 = ORIENTED_EDGE('',*,*,#360139,.T.); +#360161 = ORIENTED_EDGE('',*,*,#360162,.T.); +#360162 = EDGE_CURVE('',#360132,#360163,#360165,.T.); +#360163 = VERTEX_POINT('',#360164); +#360164 = CARTESIAN_POINT('',(151.48,-114.995,-4.E-02)); +#360165 = CIRCLE('',#360166,0.135001418495); +#360166 = AXIS2_PLACEMENT_3D('',#360167,#360168,#360169); +#360167 = CARTESIAN_POINT('',(151.61500141848,-114.9949985815,-4.E-02)); +#360168 = DIRECTION('',(0.,0.,-1.)); +#360169 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#360170 = ORIENTED_EDGE('',*,*,#360171,.F.); +#360171 = EDGE_CURVE('',#360172,#360163,#360174,.T.); +#360172 = VERTEX_POINT('',#360173); +#360173 = CARTESIAN_POINT('',(151.48,-114.995,0.)); +#360174 = LINE('',#360175,#360176); +#360175 = CARTESIAN_POINT('',(151.48,-114.995,0.)); +#360176 = VECTOR('',#360177,1.); +#360177 = DIRECTION('',(0.,0.,-1.)); +#360178 = ORIENTED_EDGE('',*,*,#360179,.F.); +#360179 = EDGE_CURVE('',#360140,#360172,#360180,.T.); +#360180 = CIRCLE('',#360181,0.135001418495); +#360181 = AXIS2_PLACEMENT_3D('',#360182,#360183,#360184); +#360182 = CARTESIAN_POINT('',(151.61500141848,-114.9949985815,0.)); +#360183 = DIRECTION('',(0.,0.,-1.)); +#360184 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#360185 = CYLINDRICAL_SURFACE('',#360186,0.135001418495); +#360186 = AXIS2_PLACEMENT_3D('',#360187,#360188,#360189); +#360187 = CARTESIAN_POINT('',(151.61500141848,-114.9949985815,0.)); +#360188 = DIRECTION('',(-0.,-0.,1.)); +#360189 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#360190 = ADVANCED_FACE('',(#360191),#360207,.F.); +#360191 = FACE_BOUND('',#360192,.F.); +#360192 = EDGE_LOOP('',(#360193,#360194,#360200,#360201)); +#360193 = ORIENTED_EDGE('',*,*,#360171,.T.); +#360194 = ORIENTED_EDGE('',*,*,#360195,.T.); +#360195 = EDGE_CURVE('',#360163,#359963,#360196,.T.); +#360196 = LINE('',#360197,#360198); +#360197 = CARTESIAN_POINT('',(151.48,-114.995,-4.E-02)); +#360198 = VECTOR('',#360199,1.); +#360199 = DIRECTION('',(0.,1.,0.)); +#360200 = ORIENTED_EDGE('',*,*,#359960,.F.); +#360201 = ORIENTED_EDGE('',*,*,#360202,.F.); +#360202 = EDGE_CURVE('',#360172,#359961,#360203,.T.); +#360203 = LINE('',#360204,#360205); +#360204 = CARTESIAN_POINT('',(151.48,-114.995,0.)); +#360205 = VECTOR('',#360206,1.); +#360206 = DIRECTION('',(0.,1.,0.)); +#360207 = PLANE('',#360208); +#360208 = AXIS2_PLACEMENT_3D('',#360209,#360210,#360211); +#360209 = CARTESIAN_POINT('',(151.48,-114.995,0.)); +#360210 = DIRECTION('',(1.,-0.,0.)); +#360211 = DIRECTION('',(0.,1.,0.)); +#360212 = ADVANCED_FACE('',(#360213),#360223,.F.); +#360213 = FACE_BOUND('',#360214,.F.); +#360214 = EDGE_LOOP('',(#360215,#360216,#360217,#360218,#360219,#360220, + #360221,#360222)); +#360215 = ORIENTED_EDGE('',*,*,#359987,.T.); +#360216 = ORIENTED_EDGE('',*,*,#360019,.T.); +#360217 = ORIENTED_EDGE('',*,*,#360051,.T.); +#360218 = ORIENTED_EDGE('',*,*,#360083,.T.); +#360219 = ORIENTED_EDGE('',*,*,#360115,.T.); +#360220 = ORIENTED_EDGE('',*,*,#360147,.T.); +#360221 = ORIENTED_EDGE('',*,*,#360179,.T.); +#360222 = ORIENTED_EDGE('',*,*,#360202,.T.); +#360223 = PLANE('',#360224); +#360224 = AXIS2_PLACEMENT_3D('',#360225,#360226,#360227); +#360225 = CARTESIAN_POINT('',(0.,0.,0.)); +#360226 = DIRECTION('',(-0.,-0.,-1.)); +#360227 = DIRECTION('',(-1.,0.,0.)); +#360228 = ADVANCED_FACE('',(#360229),#360239,.T.); +#360229 = FACE_BOUND('',#360230,.T.); +#360230 = EDGE_LOOP('',(#360231,#360232,#360233,#360234,#360235,#360236, + #360237,#360238)); +#360231 = ORIENTED_EDGE('',*,*,#359970,.T.); +#360232 = ORIENTED_EDGE('',*,*,#360003,.T.); +#360233 = ORIENTED_EDGE('',*,*,#360034,.T.); +#360234 = ORIENTED_EDGE('',*,*,#360067,.T.); +#360235 = ORIENTED_EDGE('',*,*,#360098,.T.); +#360236 = ORIENTED_EDGE('',*,*,#360131,.T.); +#360237 = ORIENTED_EDGE('',*,*,#360162,.T.); +#360238 = ORIENTED_EDGE('',*,*,#360195,.T.); +#360239 = PLANE('',#360240); +#360240 = AXIS2_PLACEMENT_3D('',#360241,#360242,#360243); +#360241 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#360242 = DIRECTION('',(-0.,-0.,-1.)); +#360243 = DIRECTION('',(-1.,0.,0.)); +#360244 = MANIFOLD_SOLID_BREP('',#360245); +#360245 = CLOSED_SHELL('',(#360246,#360288,#360319,#360352,#360383, + #360416,#360447,#360480,#360502,#360518)); +#360246 = ADVANCED_FACE('',(#360247),#360283,.T.); +#360247 = FACE_BOUND('',#360248,.F.); +#360248 = EDGE_LOOP('',(#360249,#360259,#360268,#360276)); +#360249 = ORIENTED_EDGE('',*,*,#360250,.T.); +#360250 = EDGE_CURVE('',#360251,#360253,#360255,.T.); +#360251 = VERTEX_POINT('',#360252); +#360252 = CARTESIAN_POINT('',(132.125,-109.4875,0.)); +#360253 = VERTEX_POINT('',#360254); +#360254 = CARTESIAN_POINT('',(132.125,-109.4875,-4.E-02)); +#360255 = LINE('',#360256,#360257); +#360256 = CARTESIAN_POINT('',(132.125,-109.4875,0.)); +#360257 = VECTOR('',#360258,1.); +#360258 = DIRECTION('',(0.,0.,-1.)); +#360259 = ORIENTED_EDGE('',*,*,#360260,.T.); +#360260 = EDGE_CURVE('',#360253,#360261,#360263,.T.); +#360261 = VERTEX_POINT('',#360262); +#360262 = CARTESIAN_POINT('',(132.275,-109.3375,-4.E-02)); +#360263 = CIRCLE('',#360264,0.150000058649); +#360264 = AXIS2_PLACEMENT_3D('',#360265,#360266,#360267); +#360265 = CARTESIAN_POINT('',(132.27500005864,-109.4875000586,-4.E-02)); +#360266 = DIRECTION('',(0.,0.,-1.)); +#360267 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#360268 = ORIENTED_EDGE('',*,*,#360269,.F.); +#360269 = EDGE_CURVE('',#360270,#360261,#360272,.T.); +#360270 = VERTEX_POINT('',#360271); +#360271 = CARTESIAN_POINT('',(132.275,-109.3375,0.)); +#360272 = LINE('',#360273,#360274); +#360273 = CARTESIAN_POINT('',(132.275,-109.3375,0.)); +#360274 = VECTOR('',#360275,1.); +#360275 = DIRECTION('',(0.,0.,-1.)); +#360276 = ORIENTED_EDGE('',*,*,#360277,.F.); +#360277 = EDGE_CURVE('',#360251,#360270,#360278,.T.); +#360278 = CIRCLE('',#360279,0.150000058649); +#360279 = AXIS2_PLACEMENT_3D('',#360280,#360281,#360282); +#360280 = CARTESIAN_POINT('',(132.27500005864,-109.4875000586,0.)); +#360281 = DIRECTION('',(0.,0.,-1.)); +#360282 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#360283 = CYLINDRICAL_SURFACE('',#360284,0.150000058649); +#360284 = AXIS2_PLACEMENT_3D('',#360285,#360286,#360287); +#360285 = CARTESIAN_POINT('',(132.27500005864,-109.4875000586,0.)); +#360286 = DIRECTION('',(-0.,-0.,1.)); +#360287 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#360288 = ADVANCED_FACE('',(#360289),#360314,.F.); +#360289 = FACE_BOUND('',#360290,.F.); +#360290 = EDGE_LOOP('',(#360291,#360292,#360300,#360308)); +#360291 = ORIENTED_EDGE('',*,*,#360269,.T.); +#360292 = ORIENTED_EDGE('',*,*,#360293,.T.); +#360293 = EDGE_CURVE('',#360261,#360294,#360296,.T.); +#360294 = VERTEX_POINT('',#360295); +#360295 = CARTESIAN_POINT('',(132.575,-109.3375,-4.E-02)); +#360296 = LINE('',#360297,#360298); +#360297 = CARTESIAN_POINT('',(132.275,-109.3375,-4.E-02)); +#360298 = VECTOR('',#360299,1.); +#360299 = DIRECTION('',(1.,0.,0.)); +#360300 = ORIENTED_EDGE('',*,*,#360301,.F.); +#360301 = EDGE_CURVE('',#360302,#360294,#360304,.T.); +#360302 = VERTEX_POINT('',#360303); +#360303 = CARTESIAN_POINT('',(132.575,-109.3375,0.)); +#360304 = LINE('',#360305,#360306); +#360305 = CARTESIAN_POINT('',(132.575,-109.3375,0.)); +#360306 = VECTOR('',#360307,1.); +#360307 = DIRECTION('',(0.,0.,-1.)); +#360308 = ORIENTED_EDGE('',*,*,#360309,.F.); +#360309 = EDGE_CURVE('',#360270,#360302,#360310,.T.); +#360310 = LINE('',#360311,#360312); +#360311 = CARTESIAN_POINT('',(132.275,-109.3375,0.)); +#360312 = VECTOR('',#360313,1.); +#360313 = DIRECTION('',(1.,0.,0.)); +#360314 = PLANE('',#360315); +#360315 = AXIS2_PLACEMENT_3D('',#360316,#360317,#360318); +#360316 = CARTESIAN_POINT('',(132.275,-109.3375,0.)); +#360317 = DIRECTION('',(0.,-1.,0.)); +#360318 = DIRECTION('',(1.,0.,0.)); +#360319 = ADVANCED_FACE('',(#360320),#360347,.T.); +#360320 = FACE_BOUND('',#360321,.F.); +#360321 = EDGE_LOOP('',(#360322,#360323,#360332,#360340)); +#360322 = ORIENTED_EDGE('',*,*,#360301,.T.); +#360323 = ORIENTED_EDGE('',*,*,#360324,.T.); +#360324 = EDGE_CURVE('',#360294,#360325,#360327,.T.); +#360325 = VERTEX_POINT('',#360326); +#360326 = CARTESIAN_POINT('',(132.725,-109.4875,-4.E-02)); +#360327 = CIRCLE('',#360328,0.150000058649); +#360328 = AXIS2_PLACEMENT_3D('',#360329,#360330,#360331); +#360329 = CARTESIAN_POINT('',(132.57499994135,-109.4875000586,-4.E-02)); +#360330 = DIRECTION('',(0.,0.,-1.)); +#360331 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#360332 = ORIENTED_EDGE('',*,*,#360333,.F.); +#360333 = EDGE_CURVE('',#360334,#360325,#360336,.T.); +#360334 = VERTEX_POINT('',#360335); +#360335 = CARTESIAN_POINT('',(132.725,-109.4875,0.)); +#360336 = LINE('',#360337,#360338); +#360337 = CARTESIAN_POINT('',(132.725,-109.4875,0.)); +#360338 = VECTOR('',#360339,1.); +#360339 = DIRECTION('',(0.,0.,-1.)); +#360340 = ORIENTED_EDGE('',*,*,#360341,.F.); +#360341 = EDGE_CURVE('',#360302,#360334,#360342,.T.); +#360342 = CIRCLE('',#360343,0.150000058649); +#360343 = AXIS2_PLACEMENT_3D('',#360344,#360345,#360346); +#360344 = CARTESIAN_POINT('',(132.57499994135,-109.4875000586,0.)); +#360345 = DIRECTION('',(0.,0.,-1.)); +#360346 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#360347 = CYLINDRICAL_SURFACE('',#360348,0.150000058649); +#360348 = AXIS2_PLACEMENT_3D('',#360349,#360350,#360351); +#360349 = CARTESIAN_POINT('',(132.57499994135,-109.4875000586,0.)); +#360350 = DIRECTION('',(-0.,-0.,1.)); +#360351 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#360352 = ADVANCED_FACE('',(#360353),#360378,.F.); +#360353 = FACE_BOUND('',#360354,.F.); +#360354 = EDGE_LOOP('',(#360355,#360356,#360364,#360372)); +#360355 = ORIENTED_EDGE('',*,*,#360333,.T.); +#360356 = ORIENTED_EDGE('',*,*,#360357,.T.); +#360357 = EDGE_CURVE('',#360325,#360358,#360360,.T.); +#360358 = VERTEX_POINT('',#360359); +#360359 = CARTESIAN_POINT('',(132.725,-110.5125,-4.E-02)); +#360360 = LINE('',#360361,#360362); +#360361 = CARTESIAN_POINT('',(132.725,-109.4875,-4.E-02)); +#360362 = VECTOR('',#360363,1.); +#360363 = DIRECTION('',(0.,-1.,0.)); +#360364 = ORIENTED_EDGE('',*,*,#360365,.F.); +#360365 = EDGE_CURVE('',#360366,#360358,#360368,.T.); +#360366 = VERTEX_POINT('',#360367); +#360367 = CARTESIAN_POINT('',(132.725,-110.5125,0.)); +#360368 = LINE('',#360369,#360370); +#360369 = CARTESIAN_POINT('',(132.725,-110.5125,0.)); +#360370 = VECTOR('',#360371,1.); +#360371 = DIRECTION('',(0.,0.,-1.)); +#360372 = ORIENTED_EDGE('',*,*,#360373,.F.); +#360373 = EDGE_CURVE('',#360334,#360366,#360374,.T.); +#360374 = LINE('',#360375,#360376); +#360375 = CARTESIAN_POINT('',(132.725,-109.4875,0.)); +#360376 = VECTOR('',#360377,1.); +#360377 = DIRECTION('',(0.,-1.,0.)); +#360378 = PLANE('',#360379); +#360379 = AXIS2_PLACEMENT_3D('',#360380,#360381,#360382); +#360380 = CARTESIAN_POINT('',(132.725,-109.4875,0.)); +#360381 = DIRECTION('',(-1.,-0.,-0.)); +#360382 = DIRECTION('',(0.,-1.,0.)); +#360383 = ADVANCED_FACE('',(#360384),#360411,.T.); +#360384 = FACE_BOUND('',#360385,.F.); +#360385 = EDGE_LOOP('',(#360386,#360387,#360396,#360404)); +#360386 = ORIENTED_EDGE('',*,*,#360365,.T.); +#360387 = ORIENTED_EDGE('',*,*,#360388,.T.); +#360388 = EDGE_CURVE('',#360358,#360389,#360391,.T.); +#360389 = VERTEX_POINT('',#360390); +#360390 = CARTESIAN_POINT('',(132.575,-110.6625,-4.E-02)); +#360391 = CIRCLE('',#360392,0.150000058649); +#360392 = AXIS2_PLACEMENT_3D('',#360393,#360394,#360395); +#360393 = CARTESIAN_POINT('',(132.57499994135,-110.5124999413,-4.E-02)); +#360394 = DIRECTION('',(0.,0.,-1.)); +#360395 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#360396 = ORIENTED_EDGE('',*,*,#360397,.F.); +#360397 = EDGE_CURVE('',#360398,#360389,#360400,.T.); +#360398 = VERTEX_POINT('',#360399); +#360399 = CARTESIAN_POINT('',(132.575,-110.6625,0.)); +#360400 = LINE('',#360401,#360402); +#360401 = CARTESIAN_POINT('',(132.575,-110.6625,0.)); +#360402 = VECTOR('',#360403,1.); +#360403 = DIRECTION('',(0.,0.,-1.)); +#360404 = ORIENTED_EDGE('',*,*,#360405,.F.); +#360405 = EDGE_CURVE('',#360366,#360398,#360406,.T.); +#360406 = CIRCLE('',#360407,0.150000058649); +#360407 = AXIS2_PLACEMENT_3D('',#360408,#360409,#360410); +#360408 = CARTESIAN_POINT('',(132.57499994135,-110.5124999413,0.)); +#360409 = DIRECTION('',(0.,0.,-1.)); +#360410 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#360411 = CYLINDRICAL_SURFACE('',#360412,0.150000058649); +#360412 = AXIS2_PLACEMENT_3D('',#360413,#360414,#360415); +#360413 = CARTESIAN_POINT('',(132.57499994135,-110.5124999413,0.)); +#360414 = DIRECTION('',(-0.,-0.,1.)); +#360415 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#360416 = ADVANCED_FACE('',(#360417),#360442,.F.); +#360417 = FACE_BOUND('',#360418,.F.); +#360418 = EDGE_LOOP('',(#360419,#360420,#360428,#360436)); +#360419 = ORIENTED_EDGE('',*,*,#360397,.T.); +#360420 = ORIENTED_EDGE('',*,*,#360421,.T.); +#360421 = EDGE_CURVE('',#360389,#360422,#360424,.T.); +#360422 = VERTEX_POINT('',#360423); +#360423 = CARTESIAN_POINT('',(132.275,-110.6625,-4.E-02)); +#360424 = LINE('',#360425,#360426); +#360425 = CARTESIAN_POINT('',(132.575,-110.6625,-4.E-02)); +#360426 = VECTOR('',#360427,1.); +#360427 = DIRECTION('',(-1.,0.,0.)); +#360428 = ORIENTED_EDGE('',*,*,#360429,.F.); +#360429 = EDGE_CURVE('',#360430,#360422,#360432,.T.); +#360430 = VERTEX_POINT('',#360431); +#360431 = CARTESIAN_POINT('',(132.275,-110.6625,0.)); +#360432 = LINE('',#360433,#360434); +#360433 = CARTESIAN_POINT('',(132.275,-110.6625,0.)); +#360434 = VECTOR('',#360435,1.); +#360435 = DIRECTION('',(0.,0.,-1.)); +#360436 = ORIENTED_EDGE('',*,*,#360437,.F.); +#360437 = EDGE_CURVE('',#360398,#360430,#360438,.T.); +#360438 = LINE('',#360439,#360440); +#360439 = CARTESIAN_POINT('',(132.575,-110.6625,0.)); +#360440 = VECTOR('',#360441,1.); +#360441 = DIRECTION('',(-1.,0.,0.)); +#360442 = PLANE('',#360443); +#360443 = AXIS2_PLACEMENT_3D('',#360444,#360445,#360446); +#360444 = CARTESIAN_POINT('',(132.575,-110.6625,0.)); +#360445 = DIRECTION('',(0.,1.,0.)); +#360446 = DIRECTION('',(-1.,0.,0.)); +#360447 = ADVANCED_FACE('',(#360448),#360475,.T.); +#360448 = FACE_BOUND('',#360449,.F.); +#360449 = EDGE_LOOP('',(#360450,#360451,#360460,#360468)); +#360450 = ORIENTED_EDGE('',*,*,#360429,.T.); +#360451 = ORIENTED_EDGE('',*,*,#360452,.T.); +#360452 = EDGE_CURVE('',#360422,#360453,#360455,.T.); +#360453 = VERTEX_POINT('',#360454); +#360454 = CARTESIAN_POINT('',(132.125,-110.5125,-4.E-02)); +#360455 = CIRCLE('',#360456,0.150000058649); +#360456 = AXIS2_PLACEMENT_3D('',#360457,#360458,#360459); +#360457 = CARTESIAN_POINT('',(132.27500005864,-110.5124999413,-4.E-02)); +#360458 = DIRECTION('',(0.,0.,-1.)); +#360459 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#360460 = ORIENTED_EDGE('',*,*,#360461,.F.); +#360461 = EDGE_CURVE('',#360462,#360453,#360464,.T.); +#360462 = VERTEX_POINT('',#360463); +#360463 = CARTESIAN_POINT('',(132.125,-110.5125,0.)); +#360464 = LINE('',#360465,#360466); +#360465 = CARTESIAN_POINT('',(132.125,-110.5125,0.)); +#360466 = VECTOR('',#360467,1.); +#360467 = DIRECTION('',(0.,0.,-1.)); +#360468 = ORIENTED_EDGE('',*,*,#360469,.F.); +#360469 = EDGE_CURVE('',#360430,#360462,#360470,.T.); +#360470 = CIRCLE('',#360471,0.150000058649); +#360471 = AXIS2_PLACEMENT_3D('',#360472,#360473,#360474); +#360472 = CARTESIAN_POINT('',(132.27500005864,-110.5124999413,0.)); +#360473 = DIRECTION('',(0.,0.,-1.)); +#360474 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#360475 = CYLINDRICAL_SURFACE('',#360476,0.150000058649); +#360476 = AXIS2_PLACEMENT_3D('',#360477,#360478,#360479); +#360477 = CARTESIAN_POINT('',(132.27500005864,-110.5124999413,0.)); +#360478 = DIRECTION('',(-0.,-0.,1.)); +#360479 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#360480 = ADVANCED_FACE('',(#360481),#360497,.F.); +#360481 = FACE_BOUND('',#360482,.F.); +#360482 = EDGE_LOOP('',(#360483,#360484,#360490,#360491)); +#360483 = ORIENTED_EDGE('',*,*,#360461,.T.); +#360484 = ORIENTED_EDGE('',*,*,#360485,.T.); +#360485 = EDGE_CURVE('',#360453,#360253,#360486,.T.); +#360486 = LINE('',#360487,#360488); +#360487 = CARTESIAN_POINT('',(132.125,-110.5125,-4.E-02)); +#360488 = VECTOR('',#360489,1.); +#360489 = DIRECTION('',(0.,1.,0.)); +#360490 = ORIENTED_EDGE('',*,*,#360250,.F.); +#360491 = ORIENTED_EDGE('',*,*,#360492,.F.); +#360492 = EDGE_CURVE('',#360462,#360251,#360493,.T.); +#360493 = LINE('',#360494,#360495); +#360494 = CARTESIAN_POINT('',(132.125,-110.5125,0.)); +#360495 = VECTOR('',#360496,1.); +#360496 = DIRECTION('',(0.,1.,0.)); +#360497 = PLANE('',#360498); +#360498 = AXIS2_PLACEMENT_3D('',#360499,#360500,#360501); +#360499 = CARTESIAN_POINT('',(132.125,-110.5125,0.)); +#360500 = DIRECTION('',(1.,-0.,0.)); +#360501 = DIRECTION('',(0.,1.,0.)); +#360502 = ADVANCED_FACE('',(#360503),#360513,.F.); +#360503 = FACE_BOUND('',#360504,.F.); +#360504 = EDGE_LOOP('',(#360505,#360506,#360507,#360508,#360509,#360510, + #360511,#360512)); +#360505 = ORIENTED_EDGE('',*,*,#360277,.T.); +#360506 = ORIENTED_EDGE('',*,*,#360309,.T.); +#360507 = ORIENTED_EDGE('',*,*,#360341,.T.); +#360508 = ORIENTED_EDGE('',*,*,#360373,.T.); +#360509 = ORIENTED_EDGE('',*,*,#360405,.T.); +#360510 = ORIENTED_EDGE('',*,*,#360437,.T.); +#360511 = ORIENTED_EDGE('',*,*,#360469,.T.); +#360512 = ORIENTED_EDGE('',*,*,#360492,.T.); +#360513 = PLANE('',#360514); +#360514 = AXIS2_PLACEMENT_3D('',#360515,#360516,#360517); +#360515 = CARTESIAN_POINT('',(0.,0.,0.)); +#360516 = DIRECTION('',(-0.,-0.,-1.)); +#360517 = DIRECTION('',(-1.,0.,0.)); +#360518 = ADVANCED_FACE('',(#360519),#360529,.T.); +#360519 = FACE_BOUND('',#360520,.T.); +#360520 = EDGE_LOOP('',(#360521,#360522,#360523,#360524,#360525,#360526, + #360527,#360528)); +#360521 = ORIENTED_EDGE('',*,*,#360260,.T.); +#360522 = ORIENTED_EDGE('',*,*,#360293,.T.); +#360523 = ORIENTED_EDGE('',*,*,#360324,.T.); +#360524 = ORIENTED_EDGE('',*,*,#360357,.T.); +#360525 = ORIENTED_EDGE('',*,*,#360388,.T.); +#360526 = ORIENTED_EDGE('',*,*,#360421,.T.); +#360527 = ORIENTED_EDGE('',*,*,#360452,.T.); +#360528 = ORIENTED_EDGE('',*,*,#360485,.T.); +#360529 = PLANE('',#360530); +#360530 = AXIS2_PLACEMENT_3D('',#360531,#360532,#360533); +#360531 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#360532 = DIRECTION('',(-0.,-0.,-1.)); +#360533 = DIRECTION('',(-1.,0.,0.)); +#360534 = MANIFOLD_SOLID_BREP('',#360535); +#360535 = CLOSED_SHELL('',(#360536,#360578,#360609,#360642,#360673, + #360706,#360737,#360770,#360792,#360808)); +#360536 = ADVANCED_FACE('',(#360537),#360573,.T.); +#360537 = FACE_BOUND('',#360538,.F.); +#360538 = EDGE_LOOP('',(#360539,#360549,#360558,#360566)); +#360539 = ORIENTED_EDGE('',*,*,#360540,.T.); +#360540 = EDGE_CURVE('',#360541,#360543,#360545,.T.); +#360541 = VERTEX_POINT('',#360542); +#360542 = CARTESIAN_POINT('',(131.7,-118.952,0.)); +#360543 = VERTEX_POINT('',#360544); +#360544 = CARTESIAN_POINT('',(131.7,-118.952,-4.E-02)); +#360545 = LINE('',#360546,#360547); +#360546 = CARTESIAN_POINT('',(131.7,-118.952,0.)); +#360547 = VECTOR('',#360548,1.); +#360548 = DIRECTION('',(0.,0.,-1.)); +#360549 = ORIENTED_EDGE('',*,*,#360550,.T.); +#360550 = EDGE_CURVE('',#360543,#360551,#360553,.T.); +#360551 = VERTEX_POINT('',#360552); +#360552 = CARTESIAN_POINT('',(131.752,-118.9,-4.E-02)); +#360553 = CIRCLE('',#360554,5.199847263153E-02); +#360554 = AXIS2_PLACEMENT_3D('',#360555,#360556,#360557); +#360555 = CARTESIAN_POINT('',(131.7519984726,-118.9519984726,-4.E-02)); +#360556 = DIRECTION('',(0.,0.,-1.)); +#360557 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#360558 = ORIENTED_EDGE('',*,*,#360559,.F.); +#360559 = EDGE_CURVE('',#360560,#360551,#360562,.T.); +#360560 = VERTEX_POINT('',#360561); +#360561 = CARTESIAN_POINT('',(131.752,-118.9,0.)); +#360562 = LINE('',#360563,#360564); +#360563 = CARTESIAN_POINT('',(131.752,-118.9,0.)); +#360564 = VECTOR('',#360565,1.); +#360565 = DIRECTION('',(0.,0.,-1.)); +#360566 = ORIENTED_EDGE('',*,*,#360567,.F.); +#360567 = EDGE_CURVE('',#360541,#360560,#360568,.T.); +#360568 = CIRCLE('',#360569,5.199847263153E-02); +#360569 = AXIS2_PLACEMENT_3D('',#360570,#360571,#360572); +#360570 = CARTESIAN_POINT('',(131.7519984726,-118.9519984726,0.)); +#360571 = DIRECTION('',(0.,0.,-1.)); +#360572 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#360573 = CYLINDRICAL_SURFACE('',#360574,5.199847263153E-02); +#360574 = AXIS2_PLACEMENT_3D('',#360575,#360576,#360577); +#360575 = CARTESIAN_POINT('',(131.7519984726,-118.9519984726,0.)); +#360576 = DIRECTION('',(-0.,-0.,1.)); +#360577 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#360578 = ADVANCED_FACE('',(#360579),#360604,.F.); +#360579 = FACE_BOUND('',#360580,.F.); +#360580 = EDGE_LOOP('',(#360581,#360582,#360590,#360598)); +#360581 = ORIENTED_EDGE('',*,*,#360559,.T.); +#360582 = ORIENTED_EDGE('',*,*,#360583,.T.); +#360583 = EDGE_CURVE('',#360551,#360584,#360586,.T.); +#360584 = VERTEX_POINT('',#360585); +#360585 = CARTESIAN_POINT('',(132.148,-118.9,-4.E-02)); +#360586 = LINE('',#360587,#360588); +#360587 = CARTESIAN_POINT('',(131.752,-118.9,-4.E-02)); +#360588 = VECTOR('',#360589,1.); +#360589 = DIRECTION('',(1.,0.,0.)); +#360590 = ORIENTED_EDGE('',*,*,#360591,.F.); +#360591 = EDGE_CURVE('',#360592,#360584,#360594,.T.); +#360592 = VERTEX_POINT('',#360593); +#360593 = CARTESIAN_POINT('',(132.148,-118.9,0.)); +#360594 = LINE('',#360595,#360596); +#360595 = CARTESIAN_POINT('',(132.148,-118.9,0.)); +#360596 = VECTOR('',#360597,1.); +#360597 = DIRECTION('',(0.,0.,-1.)); +#360598 = ORIENTED_EDGE('',*,*,#360599,.F.); +#360599 = EDGE_CURVE('',#360560,#360592,#360600,.T.); +#360600 = LINE('',#360601,#360602); +#360601 = CARTESIAN_POINT('',(131.752,-118.9,0.)); +#360602 = VECTOR('',#360603,1.); +#360603 = DIRECTION('',(1.,0.,0.)); +#360604 = PLANE('',#360605); +#360605 = AXIS2_PLACEMENT_3D('',#360606,#360607,#360608); +#360606 = CARTESIAN_POINT('',(131.752,-118.9,0.)); +#360607 = DIRECTION('',(0.,-1.,0.)); +#360608 = DIRECTION('',(1.,0.,0.)); +#360609 = ADVANCED_FACE('',(#360610),#360637,.T.); +#360610 = FACE_BOUND('',#360611,.F.); +#360611 = EDGE_LOOP('',(#360612,#360613,#360622,#360630)); +#360612 = ORIENTED_EDGE('',*,*,#360591,.T.); +#360613 = ORIENTED_EDGE('',*,*,#360614,.T.); +#360614 = EDGE_CURVE('',#360584,#360615,#360617,.T.); +#360615 = VERTEX_POINT('',#360616); +#360616 = CARTESIAN_POINT('',(132.2,-118.952,-4.E-02)); +#360617 = CIRCLE('',#360618,5.199847263153E-02); +#360618 = AXIS2_PLACEMENT_3D('',#360619,#360620,#360621); +#360619 = CARTESIAN_POINT('',(132.14800152739,-118.9519984726,-4.E-02)); +#360620 = DIRECTION('',(0.,0.,-1.)); +#360621 = DIRECTION('',(-2.937376483938E-05,0.999999999569,0.)); +#360622 = ORIENTED_EDGE('',*,*,#360623,.F.); +#360623 = EDGE_CURVE('',#360624,#360615,#360626,.T.); +#360624 = VERTEX_POINT('',#360625); +#360625 = CARTESIAN_POINT('',(132.2,-118.952,0.)); +#360626 = LINE('',#360627,#360628); +#360627 = CARTESIAN_POINT('',(132.2,-118.952,0.)); +#360628 = VECTOR('',#360629,1.); +#360629 = DIRECTION('',(0.,0.,-1.)); +#360630 = ORIENTED_EDGE('',*,*,#360631,.F.); +#360631 = EDGE_CURVE('',#360592,#360624,#360632,.T.); +#360632 = CIRCLE('',#360633,5.199847263153E-02); +#360633 = AXIS2_PLACEMENT_3D('',#360634,#360635,#360636); +#360634 = CARTESIAN_POINT('',(132.14800152739,-118.9519984726,0.)); +#360635 = DIRECTION('',(0.,0.,-1.)); +#360636 = DIRECTION('',(-2.937376483938E-05,0.999999999569,0.)); +#360637 = CYLINDRICAL_SURFACE('',#360638,5.199847263153E-02); +#360638 = AXIS2_PLACEMENT_3D('',#360639,#360640,#360641); +#360639 = CARTESIAN_POINT('',(132.14800152739,-118.9519984726,0.)); +#360640 = DIRECTION('',(-0.,-0.,1.)); +#360641 = DIRECTION('',(-2.937376483938E-05,0.999999999569,0.)); +#360642 = ADVANCED_FACE('',(#360643),#360668,.F.); +#360643 = FACE_BOUND('',#360644,.F.); +#360644 = EDGE_LOOP('',(#360645,#360646,#360654,#360662)); +#360645 = ORIENTED_EDGE('',*,*,#360623,.T.); +#360646 = ORIENTED_EDGE('',*,*,#360647,.T.); +#360647 = EDGE_CURVE('',#360615,#360648,#360650,.T.); +#360648 = VERTEX_POINT('',#360649); +#360649 = CARTESIAN_POINT('',(132.2,-119.048,-4.E-02)); +#360650 = LINE('',#360651,#360652); +#360651 = CARTESIAN_POINT('',(132.2,-118.952,-4.E-02)); +#360652 = VECTOR('',#360653,1.); +#360653 = DIRECTION('',(0.,-1.,0.)); +#360654 = ORIENTED_EDGE('',*,*,#360655,.F.); +#360655 = EDGE_CURVE('',#360656,#360648,#360658,.T.); +#360656 = VERTEX_POINT('',#360657); +#360657 = CARTESIAN_POINT('',(132.2,-119.048,0.)); +#360658 = LINE('',#360659,#360660); +#360659 = CARTESIAN_POINT('',(132.2,-119.048,0.)); +#360660 = VECTOR('',#360661,1.); +#360661 = DIRECTION('',(0.,0.,-1.)); +#360662 = ORIENTED_EDGE('',*,*,#360663,.F.); +#360663 = EDGE_CURVE('',#360624,#360656,#360664,.T.); +#360664 = LINE('',#360665,#360666); +#360665 = CARTESIAN_POINT('',(132.2,-118.952,0.)); +#360666 = VECTOR('',#360667,1.); +#360667 = DIRECTION('',(0.,-1.,0.)); +#360668 = PLANE('',#360669); +#360669 = AXIS2_PLACEMENT_3D('',#360670,#360671,#360672); +#360670 = CARTESIAN_POINT('',(132.2,-118.952,0.)); +#360671 = DIRECTION('',(-1.,-0.,-0.)); +#360672 = DIRECTION('',(0.,-1.,0.)); +#360673 = ADVANCED_FACE('',(#360674),#360701,.T.); +#360674 = FACE_BOUND('',#360675,.F.); +#360675 = EDGE_LOOP('',(#360676,#360677,#360686,#360694)); +#360676 = ORIENTED_EDGE('',*,*,#360655,.T.); +#360677 = ORIENTED_EDGE('',*,*,#360678,.T.); +#360678 = EDGE_CURVE('',#360648,#360679,#360681,.T.); +#360679 = VERTEX_POINT('',#360680); +#360680 = CARTESIAN_POINT('',(132.148,-119.1,-4.E-02)); +#360681 = CIRCLE('',#360682,5.199847263153E-02); +#360682 = AXIS2_PLACEMENT_3D('',#360683,#360684,#360685); +#360683 = CARTESIAN_POINT('',(132.14800152739,-119.0480015273,-4.E-02)); +#360684 = DIRECTION('',(0.,0.,-1.)); +#360685 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#360686 = ORIENTED_EDGE('',*,*,#360687,.F.); +#360687 = EDGE_CURVE('',#360688,#360679,#360690,.T.); +#360688 = VERTEX_POINT('',#360689); +#360689 = CARTESIAN_POINT('',(132.148,-119.1,0.)); +#360690 = LINE('',#360691,#360692); +#360691 = CARTESIAN_POINT('',(132.148,-119.1,0.)); +#360692 = VECTOR('',#360693,1.); +#360693 = DIRECTION('',(0.,0.,-1.)); +#360694 = ORIENTED_EDGE('',*,*,#360695,.F.); +#360695 = EDGE_CURVE('',#360656,#360688,#360696,.T.); +#360696 = CIRCLE('',#360697,5.199847263153E-02); +#360697 = AXIS2_PLACEMENT_3D('',#360698,#360699,#360700); +#360698 = CARTESIAN_POINT('',(132.14800152739,-119.0480015273,0.)); +#360699 = DIRECTION('',(0.,0.,-1.)); +#360700 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#360701 = CYLINDRICAL_SURFACE('',#360702,5.199847263153E-02); +#360702 = AXIS2_PLACEMENT_3D('',#360703,#360704,#360705); +#360703 = CARTESIAN_POINT('',(132.14800152739,-119.0480015273,0.)); +#360704 = DIRECTION('',(-0.,-0.,1.)); +#360705 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#360706 = ADVANCED_FACE('',(#360707),#360732,.F.); +#360707 = FACE_BOUND('',#360708,.F.); +#360708 = EDGE_LOOP('',(#360709,#360710,#360718,#360726)); +#360709 = ORIENTED_EDGE('',*,*,#360687,.T.); +#360710 = ORIENTED_EDGE('',*,*,#360711,.T.); +#360711 = EDGE_CURVE('',#360679,#360712,#360714,.T.); +#360712 = VERTEX_POINT('',#360713); +#360713 = CARTESIAN_POINT('',(131.752,-119.1,-4.E-02)); +#360714 = LINE('',#360715,#360716); +#360715 = CARTESIAN_POINT('',(132.148,-119.1,-4.E-02)); +#360716 = VECTOR('',#360717,1.); +#360717 = DIRECTION('',(-1.,0.,0.)); +#360718 = ORIENTED_EDGE('',*,*,#360719,.F.); +#360719 = EDGE_CURVE('',#360720,#360712,#360722,.T.); +#360720 = VERTEX_POINT('',#360721); +#360721 = CARTESIAN_POINT('',(131.752,-119.1,0.)); +#360722 = LINE('',#360723,#360724); +#360723 = CARTESIAN_POINT('',(131.752,-119.1,0.)); +#360724 = VECTOR('',#360725,1.); +#360725 = DIRECTION('',(0.,0.,-1.)); +#360726 = ORIENTED_EDGE('',*,*,#360727,.F.); +#360727 = EDGE_CURVE('',#360688,#360720,#360728,.T.); +#360728 = LINE('',#360729,#360730); +#360729 = CARTESIAN_POINT('',(132.148,-119.1,0.)); +#360730 = VECTOR('',#360731,1.); +#360731 = DIRECTION('',(-1.,0.,0.)); +#360732 = PLANE('',#360733); +#360733 = AXIS2_PLACEMENT_3D('',#360734,#360735,#360736); +#360734 = CARTESIAN_POINT('',(132.148,-119.1,0.)); +#360735 = DIRECTION('',(0.,1.,0.)); +#360736 = DIRECTION('',(-1.,0.,0.)); +#360737 = ADVANCED_FACE('',(#360738),#360765,.T.); +#360738 = FACE_BOUND('',#360739,.F.); +#360739 = EDGE_LOOP('',(#360740,#360741,#360750,#360758)); +#360740 = ORIENTED_EDGE('',*,*,#360719,.T.); +#360741 = ORIENTED_EDGE('',*,*,#360742,.T.); +#360742 = EDGE_CURVE('',#360712,#360743,#360745,.T.); +#360743 = VERTEX_POINT('',#360744); +#360744 = CARTESIAN_POINT('',(131.7,-119.048,-4.E-02)); +#360745 = CIRCLE('',#360746,5.199847263153E-02); +#360746 = AXIS2_PLACEMENT_3D('',#360747,#360748,#360749); +#360747 = CARTESIAN_POINT('',(131.7519984726,-119.0480015273,-4.E-02)); +#360748 = DIRECTION('',(0.,0.,-1.)); +#360749 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#360750 = ORIENTED_EDGE('',*,*,#360751,.F.); +#360751 = EDGE_CURVE('',#360752,#360743,#360754,.T.); +#360752 = VERTEX_POINT('',#360753); +#360753 = CARTESIAN_POINT('',(131.7,-119.048,0.)); +#360754 = LINE('',#360755,#360756); +#360755 = CARTESIAN_POINT('',(131.7,-119.048,0.)); +#360756 = VECTOR('',#360757,1.); +#360757 = DIRECTION('',(0.,0.,-1.)); +#360758 = ORIENTED_EDGE('',*,*,#360759,.F.); +#360759 = EDGE_CURVE('',#360720,#360752,#360760,.T.); +#360760 = CIRCLE('',#360761,5.199847263153E-02); +#360761 = AXIS2_PLACEMENT_3D('',#360762,#360763,#360764); +#360762 = CARTESIAN_POINT('',(131.7519984726,-119.0480015273,0.)); +#360763 = DIRECTION('',(0.,0.,-1.)); +#360764 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#360765 = CYLINDRICAL_SURFACE('',#360766,5.199847263153E-02); +#360766 = AXIS2_PLACEMENT_3D('',#360767,#360768,#360769); +#360767 = CARTESIAN_POINT('',(131.7519984726,-119.0480015273,0.)); +#360768 = DIRECTION('',(-0.,-0.,1.)); +#360769 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#360770 = ADVANCED_FACE('',(#360771),#360787,.F.); +#360771 = FACE_BOUND('',#360772,.F.); +#360772 = EDGE_LOOP('',(#360773,#360774,#360780,#360781)); +#360773 = ORIENTED_EDGE('',*,*,#360751,.T.); +#360774 = ORIENTED_EDGE('',*,*,#360775,.T.); +#360775 = EDGE_CURVE('',#360743,#360543,#360776,.T.); +#360776 = LINE('',#360777,#360778); +#360777 = CARTESIAN_POINT('',(131.7,-119.048,-4.E-02)); +#360778 = VECTOR('',#360779,1.); +#360779 = DIRECTION('',(0.,1.,0.)); +#360780 = ORIENTED_EDGE('',*,*,#360540,.F.); +#360781 = ORIENTED_EDGE('',*,*,#360782,.F.); +#360782 = EDGE_CURVE('',#360752,#360541,#360783,.T.); +#360783 = LINE('',#360784,#360785); +#360784 = CARTESIAN_POINT('',(131.7,-119.048,0.)); +#360785 = VECTOR('',#360786,1.); +#360786 = DIRECTION('',(0.,1.,0.)); +#360787 = PLANE('',#360788); +#360788 = AXIS2_PLACEMENT_3D('',#360789,#360790,#360791); +#360789 = CARTESIAN_POINT('',(131.7,-119.048,0.)); +#360790 = DIRECTION('',(1.,-0.,0.)); +#360791 = DIRECTION('',(0.,1.,0.)); +#360792 = ADVANCED_FACE('',(#360793),#360803,.F.); +#360793 = FACE_BOUND('',#360794,.F.); +#360794 = EDGE_LOOP('',(#360795,#360796,#360797,#360798,#360799,#360800, + #360801,#360802)); +#360795 = ORIENTED_EDGE('',*,*,#360567,.T.); +#360796 = ORIENTED_EDGE('',*,*,#360599,.T.); +#360797 = ORIENTED_EDGE('',*,*,#360631,.T.); +#360798 = ORIENTED_EDGE('',*,*,#360663,.T.); +#360799 = ORIENTED_EDGE('',*,*,#360695,.T.); +#360800 = ORIENTED_EDGE('',*,*,#360727,.T.); +#360801 = ORIENTED_EDGE('',*,*,#360759,.T.); +#360802 = ORIENTED_EDGE('',*,*,#360782,.T.); +#360803 = PLANE('',#360804); +#360804 = AXIS2_PLACEMENT_3D('',#360805,#360806,#360807); +#360805 = CARTESIAN_POINT('',(0.,0.,0.)); +#360806 = DIRECTION('',(-0.,-0.,-1.)); +#360807 = DIRECTION('',(-1.,0.,0.)); +#360808 = ADVANCED_FACE('',(#360809),#360819,.T.); +#360809 = FACE_BOUND('',#360810,.T.); +#360810 = EDGE_LOOP('',(#360811,#360812,#360813,#360814,#360815,#360816, + #360817,#360818)); +#360811 = ORIENTED_EDGE('',*,*,#360550,.T.); +#360812 = ORIENTED_EDGE('',*,*,#360583,.T.); +#360813 = ORIENTED_EDGE('',*,*,#360614,.T.); +#360814 = ORIENTED_EDGE('',*,*,#360647,.T.); +#360815 = ORIENTED_EDGE('',*,*,#360678,.T.); +#360816 = ORIENTED_EDGE('',*,*,#360711,.T.); +#360817 = ORIENTED_EDGE('',*,*,#360742,.T.); +#360818 = ORIENTED_EDGE('',*,*,#360775,.T.); +#360819 = PLANE('',#360820); +#360820 = AXIS2_PLACEMENT_3D('',#360821,#360822,#360823); +#360821 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#360822 = DIRECTION('',(-0.,-0.,-1.)); +#360823 = DIRECTION('',(-1.,0.,0.)); +#360824 = MANIFOLD_SOLID_BREP('',#360825); +#360825 = CLOSED_SHELL('',(#360826,#360868,#360899,#360932,#360963, + #360996,#361027,#361060,#361082,#361098)); +#360826 = ADVANCED_FACE('',(#360827),#360863,.T.); +#360827 = FACE_BOUND('',#360828,.F.); +#360828 = EDGE_LOOP('',(#360829,#360839,#360848,#360856)); +#360829 = ORIENTED_EDGE('',*,*,#360830,.T.); +#360830 = EDGE_CURVE('',#360831,#360833,#360835,.T.); +#360831 = VERTEX_POINT('',#360832); +#360832 = CARTESIAN_POINT('',(125.77,-120.815,0.)); +#360833 = VERTEX_POINT('',#360834); +#360834 = CARTESIAN_POINT('',(125.77,-120.815,-4.E-02)); +#360835 = LINE('',#360836,#360837); +#360836 = CARTESIAN_POINT('',(125.77,-120.815,0.)); +#360837 = VECTOR('',#360838,1.); +#360838 = DIRECTION('',(0.,0.,-1.)); +#360839 = ORIENTED_EDGE('',*,*,#360840,.T.); +#360840 = EDGE_CURVE('',#360833,#360841,#360843,.T.); +#360841 = VERTEX_POINT('',#360842); +#360842 = CARTESIAN_POINT('',(125.905,-120.68,-4.E-02)); +#360843 = CIRCLE('',#360844,0.135001418495); +#360844 = AXIS2_PLACEMENT_3D('',#360845,#360846,#360847); +#360845 = CARTESIAN_POINT('',(125.90500141848,-120.8150014184,-4.E-02)); +#360846 = DIRECTION('',(0.,0.,-1.)); +#360847 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#360848 = ORIENTED_EDGE('',*,*,#360849,.F.); +#360849 = EDGE_CURVE('',#360850,#360841,#360852,.T.); +#360850 = VERTEX_POINT('',#360851); +#360851 = CARTESIAN_POINT('',(125.905,-120.68,0.)); +#360852 = LINE('',#360853,#360854); +#360853 = CARTESIAN_POINT('',(125.905,-120.68,0.)); +#360854 = VECTOR('',#360855,1.); +#360855 = DIRECTION('',(0.,0.,-1.)); +#360856 = ORIENTED_EDGE('',*,*,#360857,.F.); +#360857 = EDGE_CURVE('',#360831,#360850,#360858,.T.); +#360858 = CIRCLE('',#360859,0.135001418495); +#360859 = AXIS2_PLACEMENT_3D('',#360860,#360861,#360862); +#360860 = CARTESIAN_POINT('',(125.90500141848,-120.8150014184,0.)); +#360861 = DIRECTION('',(0.,0.,-1.)); +#360862 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#360863 = CYLINDRICAL_SURFACE('',#360864,0.135001418495); +#360864 = AXIS2_PLACEMENT_3D('',#360865,#360866,#360867); +#360865 = CARTESIAN_POINT('',(125.90500141848,-120.8150014184,0.)); +#360866 = DIRECTION('',(-0.,-0.,1.)); +#360867 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#360868 = ADVANCED_FACE('',(#360869),#360894,.F.); +#360869 = FACE_BOUND('',#360870,.F.); +#360870 = EDGE_LOOP('',(#360871,#360872,#360880,#360888)); +#360871 = ORIENTED_EDGE('',*,*,#360849,.T.); +#360872 = ORIENTED_EDGE('',*,*,#360873,.T.); +#360873 = EDGE_CURVE('',#360841,#360874,#360876,.T.); +#360874 = VERTEX_POINT('',#360875); +#360875 = CARTESIAN_POINT('',(126.175,-120.68,-4.E-02)); +#360876 = LINE('',#360877,#360878); +#360877 = CARTESIAN_POINT('',(125.905,-120.68,-4.E-02)); +#360878 = VECTOR('',#360879,1.); +#360879 = DIRECTION('',(1.,0.,0.)); +#360880 = ORIENTED_EDGE('',*,*,#360881,.F.); +#360881 = EDGE_CURVE('',#360882,#360874,#360884,.T.); +#360882 = VERTEX_POINT('',#360883); +#360883 = CARTESIAN_POINT('',(126.175,-120.68,0.)); +#360884 = LINE('',#360885,#360886); +#360885 = CARTESIAN_POINT('',(126.175,-120.68,0.)); +#360886 = VECTOR('',#360887,1.); +#360887 = DIRECTION('',(0.,0.,-1.)); +#360888 = ORIENTED_EDGE('',*,*,#360889,.F.); +#360889 = EDGE_CURVE('',#360850,#360882,#360890,.T.); +#360890 = LINE('',#360891,#360892); +#360891 = CARTESIAN_POINT('',(125.905,-120.68,0.)); +#360892 = VECTOR('',#360893,1.); +#360893 = DIRECTION('',(1.,0.,0.)); +#360894 = PLANE('',#360895); +#360895 = AXIS2_PLACEMENT_3D('',#360896,#360897,#360898); +#360896 = CARTESIAN_POINT('',(125.905,-120.68,0.)); +#360897 = DIRECTION('',(0.,-1.,0.)); +#360898 = DIRECTION('',(1.,0.,0.)); +#360899 = ADVANCED_FACE('',(#360900),#360927,.T.); +#360900 = FACE_BOUND('',#360901,.F.); +#360901 = EDGE_LOOP('',(#360902,#360903,#360912,#360920)); +#360902 = ORIENTED_EDGE('',*,*,#360881,.T.); +#360903 = ORIENTED_EDGE('',*,*,#360904,.T.); +#360904 = EDGE_CURVE('',#360874,#360905,#360907,.T.); +#360905 = VERTEX_POINT('',#360906); +#360906 = CARTESIAN_POINT('',(126.31,-120.815,-4.E-02)); +#360907 = CIRCLE('',#360908,0.135001418495); +#360908 = AXIS2_PLACEMENT_3D('',#360909,#360910,#360911); +#360909 = CARTESIAN_POINT('',(126.17499858151,-120.8150014184,-4.E-02)); +#360910 = DIRECTION('',(0.,0.,-1.)); +#360911 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#360912 = ORIENTED_EDGE('',*,*,#360913,.F.); +#360913 = EDGE_CURVE('',#360914,#360905,#360916,.T.); +#360914 = VERTEX_POINT('',#360915); +#360915 = CARTESIAN_POINT('',(126.31,-120.815,0.)); +#360916 = LINE('',#360917,#360918); +#360917 = CARTESIAN_POINT('',(126.31,-120.815,0.)); +#360918 = VECTOR('',#360919,1.); +#360919 = DIRECTION('',(0.,0.,-1.)); +#360920 = ORIENTED_EDGE('',*,*,#360921,.F.); +#360921 = EDGE_CURVE('',#360882,#360914,#360922,.T.); +#360922 = CIRCLE('',#360923,0.135001418495); +#360923 = AXIS2_PLACEMENT_3D('',#360924,#360925,#360926); +#360924 = CARTESIAN_POINT('',(126.17499858151,-120.8150014184,0.)); +#360925 = DIRECTION('',(0.,0.,-1.)); +#360926 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#360927 = CYLINDRICAL_SURFACE('',#360928,0.135001418495); +#360928 = AXIS2_PLACEMENT_3D('',#360929,#360930,#360931); +#360929 = CARTESIAN_POINT('',(126.17499858151,-120.8150014184,0.)); +#360930 = DIRECTION('',(-0.,-0.,1.)); +#360931 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#360932 = ADVANCED_FACE('',(#360933),#360958,.F.); +#360933 = FACE_BOUND('',#360934,.F.); +#360934 = EDGE_LOOP('',(#360935,#360936,#360944,#360952)); +#360935 = ORIENTED_EDGE('',*,*,#360913,.T.); +#360936 = ORIENTED_EDGE('',*,*,#360937,.T.); +#360937 = EDGE_CURVE('',#360905,#360938,#360940,.T.); +#360938 = VERTEX_POINT('',#360939); +#360939 = CARTESIAN_POINT('',(126.31,-121.185,-4.E-02)); +#360940 = LINE('',#360941,#360942); +#360941 = CARTESIAN_POINT('',(126.31,-120.815,-4.E-02)); +#360942 = VECTOR('',#360943,1.); +#360943 = DIRECTION('',(0.,-1.,0.)); +#360944 = ORIENTED_EDGE('',*,*,#360945,.F.); +#360945 = EDGE_CURVE('',#360946,#360938,#360948,.T.); +#360946 = VERTEX_POINT('',#360947); +#360947 = CARTESIAN_POINT('',(126.31,-121.185,0.)); +#360948 = LINE('',#360949,#360950); +#360949 = CARTESIAN_POINT('',(126.31,-121.185,0.)); +#360950 = VECTOR('',#360951,1.); +#360951 = DIRECTION('',(0.,0.,-1.)); +#360952 = ORIENTED_EDGE('',*,*,#360953,.F.); +#360953 = EDGE_CURVE('',#360914,#360946,#360954,.T.); +#360954 = LINE('',#360955,#360956); +#360955 = CARTESIAN_POINT('',(126.31,-120.815,0.)); +#360956 = VECTOR('',#360957,1.); +#360957 = DIRECTION('',(0.,-1.,0.)); +#360958 = PLANE('',#360959); +#360959 = AXIS2_PLACEMENT_3D('',#360960,#360961,#360962); +#360960 = CARTESIAN_POINT('',(126.31,-120.815,0.)); +#360961 = DIRECTION('',(-1.,-0.,-0.)); +#360962 = DIRECTION('',(0.,-1.,0.)); +#360963 = ADVANCED_FACE('',(#360964),#360991,.T.); +#360964 = FACE_BOUND('',#360965,.F.); +#360965 = EDGE_LOOP('',(#360966,#360967,#360976,#360984)); +#360966 = ORIENTED_EDGE('',*,*,#360945,.T.); +#360967 = ORIENTED_EDGE('',*,*,#360968,.T.); +#360968 = EDGE_CURVE('',#360938,#360969,#360971,.T.); +#360969 = VERTEX_POINT('',#360970); +#360970 = CARTESIAN_POINT('',(126.175,-121.32,-4.E-02)); +#360971 = CIRCLE('',#360972,0.135001418495); +#360972 = AXIS2_PLACEMENT_3D('',#360973,#360974,#360975); +#360973 = CARTESIAN_POINT('',(126.17499858151,-121.1849985815,-4.E-02)); +#360974 = DIRECTION('',(0.,0.,-1.)); +#360975 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#360976 = ORIENTED_EDGE('',*,*,#360977,.F.); +#360977 = EDGE_CURVE('',#360978,#360969,#360980,.T.); +#360978 = VERTEX_POINT('',#360979); +#360979 = CARTESIAN_POINT('',(126.175,-121.32,0.)); +#360980 = LINE('',#360981,#360982); +#360981 = CARTESIAN_POINT('',(126.175,-121.32,0.)); +#360982 = VECTOR('',#360983,1.); +#360983 = DIRECTION('',(0.,0.,-1.)); +#360984 = ORIENTED_EDGE('',*,*,#360985,.F.); +#360985 = EDGE_CURVE('',#360946,#360978,#360986,.T.); +#360986 = CIRCLE('',#360987,0.135001418495); +#360987 = AXIS2_PLACEMENT_3D('',#360988,#360989,#360990); +#360988 = CARTESIAN_POINT('',(126.17499858151,-121.1849985815,0.)); +#360989 = DIRECTION('',(0.,0.,-1.)); +#360990 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#360991 = CYLINDRICAL_SURFACE('',#360992,0.135001418495); +#360992 = AXIS2_PLACEMENT_3D('',#360993,#360994,#360995); +#360993 = CARTESIAN_POINT('',(126.17499858151,-121.1849985815,0.)); +#360994 = DIRECTION('',(-0.,-0.,1.)); +#360995 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#360996 = ADVANCED_FACE('',(#360997),#361022,.F.); +#360997 = FACE_BOUND('',#360998,.F.); +#360998 = EDGE_LOOP('',(#360999,#361000,#361008,#361016)); +#360999 = ORIENTED_EDGE('',*,*,#360977,.T.); +#361000 = ORIENTED_EDGE('',*,*,#361001,.T.); +#361001 = EDGE_CURVE('',#360969,#361002,#361004,.T.); +#361002 = VERTEX_POINT('',#361003); +#361003 = CARTESIAN_POINT('',(125.905,-121.32,-4.E-02)); +#361004 = LINE('',#361005,#361006); +#361005 = CARTESIAN_POINT('',(126.175,-121.32,-4.E-02)); +#361006 = VECTOR('',#361007,1.); +#361007 = DIRECTION('',(-1.,0.,0.)); +#361008 = ORIENTED_EDGE('',*,*,#361009,.F.); +#361009 = EDGE_CURVE('',#361010,#361002,#361012,.T.); +#361010 = VERTEX_POINT('',#361011); +#361011 = CARTESIAN_POINT('',(125.905,-121.32,0.)); +#361012 = LINE('',#361013,#361014); +#361013 = CARTESIAN_POINT('',(125.905,-121.32,0.)); +#361014 = VECTOR('',#361015,1.); +#361015 = DIRECTION('',(0.,0.,-1.)); +#361016 = ORIENTED_EDGE('',*,*,#361017,.F.); +#361017 = EDGE_CURVE('',#360978,#361010,#361018,.T.); +#361018 = LINE('',#361019,#361020); +#361019 = CARTESIAN_POINT('',(126.175,-121.32,0.)); +#361020 = VECTOR('',#361021,1.); +#361021 = DIRECTION('',(-1.,0.,0.)); +#361022 = PLANE('',#361023); +#361023 = AXIS2_PLACEMENT_3D('',#361024,#361025,#361026); +#361024 = CARTESIAN_POINT('',(126.175,-121.32,0.)); +#361025 = DIRECTION('',(0.,1.,0.)); +#361026 = DIRECTION('',(-1.,0.,0.)); +#361027 = ADVANCED_FACE('',(#361028),#361055,.T.); +#361028 = FACE_BOUND('',#361029,.F.); +#361029 = EDGE_LOOP('',(#361030,#361031,#361040,#361048)); +#361030 = ORIENTED_EDGE('',*,*,#361009,.T.); +#361031 = ORIENTED_EDGE('',*,*,#361032,.T.); +#361032 = EDGE_CURVE('',#361002,#361033,#361035,.T.); +#361033 = VERTEX_POINT('',#361034); +#361034 = CARTESIAN_POINT('',(125.77,-121.185,-4.E-02)); +#361035 = CIRCLE('',#361036,0.135001418495); +#361036 = AXIS2_PLACEMENT_3D('',#361037,#361038,#361039); +#361037 = CARTESIAN_POINT('',(125.90500141848,-121.1849985815,-4.E-02)); +#361038 = DIRECTION('',(0.,0.,-1.)); +#361039 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361040 = ORIENTED_EDGE('',*,*,#361041,.F.); +#361041 = EDGE_CURVE('',#361042,#361033,#361044,.T.); +#361042 = VERTEX_POINT('',#361043); +#361043 = CARTESIAN_POINT('',(125.77,-121.185,0.)); +#361044 = LINE('',#361045,#361046); +#361045 = CARTESIAN_POINT('',(125.77,-121.185,0.)); +#361046 = VECTOR('',#361047,1.); +#361047 = DIRECTION('',(0.,0.,-1.)); +#361048 = ORIENTED_EDGE('',*,*,#361049,.F.); +#361049 = EDGE_CURVE('',#361010,#361042,#361050,.T.); +#361050 = CIRCLE('',#361051,0.135001418495); +#361051 = AXIS2_PLACEMENT_3D('',#361052,#361053,#361054); +#361052 = CARTESIAN_POINT('',(125.90500141848,-121.1849985815,0.)); +#361053 = DIRECTION('',(0.,0.,-1.)); +#361054 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361055 = CYLINDRICAL_SURFACE('',#361056,0.135001418495); +#361056 = AXIS2_PLACEMENT_3D('',#361057,#361058,#361059); +#361057 = CARTESIAN_POINT('',(125.90500141848,-121.1849985815,0.)); +#361058 = DIRECTION('',(-0.,-0.,1.)); +#361059 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361060 = ADVANCED_FACE('',(#361061),#361077,.F.); +#361061 = FACE_BOUND('',#361062,.F.); +#361062 = EDGE_LOOP('',(#361063,#361064,#361070,#361071)); +#361063 = ORIENTED_EDGE('',*,*,#361041,.T.); +#361064 = ORIENTED_EDGE('',*,*,#361065,.T.); +#361065 = EDGE_CURVE('',#361033,#360833,#361066,.T.); +#361066 = LINE('',#361067,#361068); +#361067 = CARTESIAN_POINT('',(125.77,-121.185,-4.E-02)); +#361068 = VECTOR('',#361069,1.); +#361069 = DIRECTION('',(0.,1.,0.)); +#361070 = ORIENTED_EDGE('',*,*,#360830,.F.); +#361071 = ORIENTED_EDGE('',*,*,#361072,.F.); +#361072 = EDGE_CURVE('',#361042,#360831,#361073,.T.); +#361073 = LINE('',#361074,#361075); +#361074 = CARTESIAN_POINT('',(125.77,-121.185,0.)); +#361075 = VECTOR('',#361076,1.); +#361076 = DIRECTION('',(0.,1.,0.)); +#361077 = PLANE('',#361078); +#361078 = AXIS2_PLACEMENT_3D('',#361079,#361080,#361081); +#361079 = CARTESIAN_POINT('',(125.77,-121.185,0.)); +#361080 = DIRECTION('',(1.,-0.,0.)); +#361081 = DIRECTION('',(0.,1.,0.)); +#361082 = ADVANCED_FACE('',(#361083),#361093,.F.); +#361083 = FACE_BOUND('',#361084,.F.); +#361084 = EDGE_LOOP('',(#361085,#361086,#361087,#361088,#361089,#361090, + #361091,#361092)); +#361085 = ORIENTED_EDGE('',*,*,#360857,.T.); +#361086 = ORIENTED_EDGE('',*,*,#360889,.T.); +#361087 = ORIENTED_EDGE('',*,*,#360921,.T.); +#361088 = ORIENTED_EDGE('',*,*,#360953,.T.); +#361089 = ORIENTED_EDGE('',*,*,#360985,.T.); +#361090 = ORIENTED_EDGE('',*,*,#361017,.T.); +#361091 = ORIENTED_EDGE('',*,*,#361049,.T.); +#361092 = ORIENTED_EDGE('',*,*,#361072,.T.); +#361093 = PLANE('',#361094); +#361094 = AXIS2_PLACEMENT_3D('',#361095,#361096,#361097); +#361095 = CARTESIAN_POINT('',(0.,0.,0.)); +#361096 = DIRECTION('',(-0.,-0.,-1.)); +#361097 = DIRECTION('',(-1.,0.,0.)); +#361098 = ADVANCED_FACE('',(#361099),#361109,.T.); +#361099 = FACE_BOUND('',#361100,.T.); +#361100 = EDGE_LOOP('',(#361101,#361102,#361103,#361104,#361105,#361106, + #361107,#361108)); +#361101 = ORIENTED_EDGE('',*,*,#360840,.T.); +#361102 = ORIENTED_EDGE('',*,*,#360873,.T.); +#361103 = ORIENTED_EDGE('',*,*,#360904,.T.); +#361104 = ORIENTED_EDGE('',*,*,#360937,.T.); +#361105 = ORIENTED_EDGE('',*,*,#360968,.T.); +#361106 = ORIENTED_EDGE('',*,*,#361001,.T.); +#361107 = ORIENTED_EDGE('',*,*,#361032,.T.); +#361108 = ORIENTED_EDGE('',*,*,#361065,.T.); +#361109 = PLANE('',#361110); +#361110 = AXIS2_PLACEMENT_3D('',#361111,#361112,#361113); +#361111 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#361112 = DIRECTION('',(-0.,-0.,-1.)); +#361113 = DIRECTION('',(-1.,0.,0.)); +#361114 = MANIFOLD_SOLID_BREP('',#361115); +#361115 = CLOSED_SHELL('',(#361116,#361158,#361189,#361222,#361253, + #361286,#361317,#361350,#361372,#361388)); +#361116 = ADVANCED_FACE('',(#361117),#361153,.T.); +#361117 = FACE_BOUND('',#361118,.F.); +#361118 = EDGE_LOOP('',(#361119,#361129,#361138,#361146)); +#361119 = ORIENTED_EDGE('',*,*,#361120,.T.); +#361120 = EDGE_CURVE('',#361121,#361123,#361125,.T.); +#361121 = VERTEX_POINT('',#361122); +#361122 = CARTESIAN_POINT('',(131.7,-119.752,0.)); +#361123 = VERTEX_POINT('',#361124); +#361124 = CARTESIAN_POINT('',(131.7,-119.752,-4.E-02)); +#361125 = LINE('',#361126,#361127); +#361126 = CARTESIAN_POINT('',(131.7,-119.752,0.)); +#361127 = VECTOR('',#361128,1.); +#361128 = DIRECTION('',(0.,0.,-1.)); +#361129 = ORIENTED_EDGE('',*,*,#361130,.T.); +#361130 = EDGE_CURVE('',#361123,#361131,#361133,.T.); +#361131 = VERTEX_POINT('',#361132); +#361132 = CARTESIAN_POINT('',(131.752,-119.7,-4.E-02)); +#361133 = CIRCLE('',#361134,5.199847263153E-02); +#361134 = AXIS2_PLACEMENT_3D('',#361135,#361136,#361137); +#361135 = CARTESIAN_POINT('',(131.7519984726,-119.7519984726,-4.E-02)); +#361136 = DIRECTION('',(0.,0.,-1.)); +#361137 = DIRECTION('',(-0.999999999569,-2.93737642928E-05,-0.)); +#361138 = ORIENTED_EDGE('',*,*,#361139,.F.); +#361139 = EDGE_CURVE('',#361140,#361131,#361142,.T.); +#361140 = VERTEX_POINT('',#361141); +#361141 = CARTESIAN_POINT('',(131.752,-119.7,0.)); +#361142 = LINE('',#361143,#361144); +#361143 = CARTESIAN_POINT('',(131.752,-119.7,0.)); +#361144 = VECTOR('',#361145,1.); +#361145 = DIRECTION('',(0.,0.,-1.)); +#361146 = ORIENTED_EDGE('',*,*,#361147,.F.); +#361147 = EDGE_CURVE('',#361121,#361140,#361148,.T.); +#361148 = CIRCLE('',#361149,5.199847263153E-02); +#361149 = AXIS2_PLACEMENT_3D('',#361150,#361151,#361152); +#361150 = CARTESIAN_POINT('',(131.7519984726,-119.7519984726,0.)); +#361151 = DIRECTION('',(0.,0.,-1.)); +#361152 = DIRECTION('',(-0.999999999569,-2.93737642928E-05,-0.)); +#361153 = CYLINDRICAL_SURFACE('',#361154,5.199847263153E-02); +#361154 = AXIS2_PLACEMENT_3D('',#361155,#361156,#361157); +#361155 = CARTESIAN_POINT('',(131.7519984726,-119.7519984726,0.)); +#361156 = DIRECTION('',(-0.,-0.,1.)); +#361157 = DIRECTION('',(-0.999999999569,-2.93737642928E-05,-0.)); +#361158 = ADVANCED_FACE('',(#361159),#361184,.F.); +#361159 = FACE_BOUND('',#361160,.F.); +#361160 = EDGE_LOOP('',(#361161,#361162,#361170,#361178)); +#361161 = ORIENTED_EDGE('',*,*,#361139,.T.); +#361162 = ORIENTED_EDGE('',*,*,#361163,.T.); +#361163 = EDGE_CURVE('',#361131,#361164,#361166,.T.); +#361164 = VERTEX_POINT('',#361165); +#361165 = CARTESIAN_POINT('',(132.148,-119.7,-4.E-02)); +#361166 = LINE('',#361167,#361168); +#361167 = CARTESIAN_POINT('',(131.752,-119.7,-4.E-02)); +#361168 = VECTOR('',#361169,1.); +#361169 = DIRECTION('',(1.,0.,0.)); +#361170 = ORIENTED_EDGE('',*,*,#361171,.F.); +#361171 = EDGE_CURVE('',#361172,#361164,#361174,.T.); +#361172 = VERTEX_POINT('',#361173); +#361173 = CARTESIAN_POINT('',(132.148,-119.7,0.)); +#361174 = LINE('',#361175,#361176); +#361175 = CARTESIAN_POINT('',(132.148,-119.7,0.)); +#361176 = VECTOR('',#361177,1.); +#361177 = DIRECTION('',(0.,0.,-1.)); +#361178 = ORIENTED_EDGE('',*,*,#361179,.F.); +#361179 = EDGE_CURVE('',#361140,#361172,#361180,.T.); +#361180 = LINE('',#361181,#361182); +#361181 = CARTESIAN_POINT('',(131.752,-119.7,0.)); +#361182 = VECTOR('',#361183,1.); +#361183 = DIRECTION('',(1.,0.,0.)); +#361184 = PLANE('',#361185); +#361185 = AXIS2_PLACEMENT_3D('',#361186,#361187,#361188); +#361186 = CARTESIAN_POINT('',(131.752,-119.7,0.)); +#361187 = DIRECTION('',(0.,-1.,0.)); +#361188 = DIRECTION('',(1.,0.,0.)); +#361189 = ADVANCED_FACE('',(#361190),#361217,.T.); +#361190 = FACE_BOUND('',#361191,.F.); +#361191 = EDGE_LOOP('',(#361192,#361193,#361202,#361210)); +#361192 = ORIENTED_EDGE('',*,*,#361171,.T.); +#361193 = ORIENTED_EDGE('',*,*,#361194,.T.); +#361194 = EDGE_CURVE('',#361164,#361195,#361197,.T.); +#361195 = VERTEX_POINT('',#361196); +#361196 = CARTESIAN_POINT('',(132.2,-119.752,-4.E-02)); +#361197 = CIRCLE('',#361198,5.199847263155E-02); +#361198 = AXIS2_PLACEMENT_3D('',#361199,#361200,#361201); +#361199 = CARTESIAN_POINT('',(132.14800152739,-119.7519984726,-4.E-02)); +#361200 = DIRECTION('',(0.,0.,-1.)); +#361201 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#361202 = ORIENTED_EDGE('',*,*,#361203,.F.); +#361203 = EDGE_CURVE('',#361204,#361195,#361206,.T.); +#361204 = VERTEX_POINT('',#361205); +#361205 = CARTESIAN_POINT('',(132.2,-119.752,0.)); +#361206 = LINE('',#361207,#361208); +#361207 = CARTESIAN_POINT('',(132.2,-119.752,0.)); +#361208 = VECTOR('',#361209,1.); +#361209 = DIRECTION('',(0.,0.,-1.)); +#361210 = ORIENTED_EDGE('',*,*,#361211,.F.); +#361211 = EDGE_CURVE('',#361172,#361204,#361212,.T.); +#361212 = CIRCLE('',#361213,5.199847263155E-02); +#361213 = AXIS2_PLACEMENT_3D('',#361214,#361215,#361216); +#361214 = CARTESIAN_POINT('',(132.14800152739,-119.7519984726,0.)); +#361215 = DIRECTION('',(0.,0.,-1.)); +#361216 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#361217 = CYLINDRICAL_SURFACE('',#361218,5.199847263155E-02); +#361218 = AXIS2_PLACEMENT_3D('',#361219,#361220,#361221); +#361219 = CARTESIAN_POINT('',(132.14800152739,-119.7519984726,0.)); +#361220 = DIRECTION('',(-0.,-0.,1.)); +#361221 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#361222 = ADVANCED_FACE('',(#361223),#361248,.F.); +#361223 = FACE_BOUND('',#361224,.F.); +#361224 = EDGE_LOOP('',(#361225,#361226,#361234,#361242)); +#361225 = ORIENTED_EDGE('',*,*,#361203,.T.); +#361226 = ORIENTED_EDGE('',*,*,#361227,.T.); +#361227 = EDGE_CURVE('',#361195,#361228,#361230,.T.); +#361228 = VERTEX_POINT('',#361229); +#361229 = CARTESIAN_POINT('',(132.2,-119.848,-4.E-02)); +#361230 = LINE('',#361231,#361232); +#361231 = CARTESIAN_POINT('',(132.2,-119.752,-4.E-02)); +#361232 = VECTOR('',#361233,1.); +#361233 = DIRECTION('',(0.,-1.,0.)); +#361234 = ORIENTED_EDGE('',*,*,#361235,.F.); +#361235 = EDGE_CURVE('',#361236,#361228,#361238,.T.); +#361236 = VERTEX_POINT('',#361237); +#361237 = CARTESIAN_POINT('',(132.2,-119.848,0.)); +#361238 = LINE('',#361239,#361240); +#361239 = CARTESIAN_POINT('',(132.2,-119.848,0.)); +#361240 = VECTOR('',#361241,1.); +#361241 = DIRECTION('',(0.,0.,-1.)); +#361242 = ORIENTED_EDGE('',*,*,#361243,.F.); +#361243 = EDGE_CURVE('',#361204,#361236,#361244,.T.); +#361244 = LINE('',#361245,#361246); +#361245 = CARTESIAN_POINT('',(132.2,-119.752,0.)); +#361246 = VECTOR('',#361247,1.); +#361247 = DIRECTION('',(0.,-1.,0.)); +#361248 = PLANE('',#361249); +#361249 = AXIS2_PLACEMENT_3D('',#361250,#361251,#361252); +#361250 = CARTESIAN_POINT('',(132.2,-119.752,0.)); +#361251 = DIRECTION('',(-1.,-0.,-0.)); +#361252 = DIRECTION('',(0.,-1.,0.)); +#361253 = ADVANCED_FACE('',(#361254),#361281,.T.); +#361254 = FACE_BOUND('',#361255,.F.); +#361255 = EDGE_LOOP('',(#361256,#361257,#361266,#361274)); +#361256 = ORIENTED_EDGE('',*,*,#361235,.T.); +#361257 = ORIENTED_EDGE('',*,*,#361258,.T.); +#361258 = EDGE_CURVE('',#361228,#361259,#361261,.T.); +#361259 = VERTEX_POINT('',#361260); +#361260 = CARTESIAN_POINT('',(132.148,-119.9,-4.E-02)); +#361261 = CIRCLE('',#361262,5.199847263154E-02); +#361262 = AXIS2_PLACEMENT_3D('',#361263,#361264,#361265); +#361263 = CARTESIAN_POINT('',(132.14800152739,-119.8480015273,-4.E-02)); +#361264 = DIRECTION('',(0.,0.,-1.)); +#361265 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361266 = ORIENTED_EDGE('',*,*,#361267,.F.); +#361267 = EDGE_CURVE('',#361268,#361259,#361270,.T.); +#361268 = VERTEX_POINT('',#361269); +#361269 = CARTESIAN_POINT('',(132.148,-119.9,0.)); +#361270 = LINE('',#361271,#361272); +#361271 = CARTESIAN_POINT('',(132.148,-119.9,0.)); +#361272 = VECTOR('',#361273,1.); +#361273 = DIRECTION('',(0.,0.,-1.)); +#361274 = ORIENTED_EDGE('',*,*,#361275,.F.); +#361275 = EDGE_CURVE('',#361236,#361268,#361276,.T.); +#361276 = CIRCLE('',#361277,5.199847263154E-02); +#361277 = AXIS2_PLACEMENT_3D('',#361278,#361279,#361280); +#361278 = CARTESIAN_POINT('',(132.14800152739,-119.8480015273,0.)); +#361279 = DIRECTION('',(0.,0.,-1.)); +#361280 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361281 = CYLINDRICAL_SURFACE('',#361282,5.199847263154E-02); +#361282 = AXIS2_PLACEMENT_3D('',#361283,#361284,#361285); +#361283 = CARTESIAN_POINT('',(132.14800152739,-119.8480015273,0.)); +#361284 = DIRECTION('',(-0.,-0.,1.)); +#361285 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361286 = ADVANCED_FACE('',(#361287),#361312,.F.); +#361287 = FACE_BOUND('',#361288,.F.); +#361288 = EDGE_LOOP('',(#361289,#361290,#361298,#361306)); +#361289 = ORIENTED_EDGE('',*,*,#361267,.T.); +#361290 = ORIENTED_EDGE('',*,*,#361291,.T.); +#361291 = EDGE_CURVE('',#361259,#361292,#361294,.T.); +#361292 = VERTEX_POINT('',#361293); +#361293 = CARTESIAN_POINT('',(131.752,-119.9,-4.E-02)); +#361294 = LINE('',#361295,#361296); +#361295 = CARTESIAN_POINT('',(132.148,-119.9,-4.E-02)); +#361296 = VECTOR('',#361297,1.); +#361297 = DIRECTION('',(-1.,0.,0.)); +#361298 = ORIENTED_EDGE('',*,*,#361299,.F.); +#361299 = EDGE_CURVE('',#361300,#361292,#361302,.T.); +#361300 = VERTEX_POINT('',#361301); +#361301 = CARTESIAN_POINT('',(131.752,-119.9,0.)); +#361302 = LINE('',#361303,#361304); +#361303 = CARTESIAN_POINT('',(131.752,-119.9,0.)); +#361304 = VECTOR('',#361305,1.); +#361305 = DIRECTION('',(0.,0.,-1.)); +#361306 = ORIENTED_EDGE('',*,*,#361307,.F.); +#361307 = EDGE_CURVE('',#361268,#361300,#361308,.T.); +#361308 = LINE('',#361309,#361310); +#361309 = CARTESIAN_POINT('',(132.148,-119.9,0.)); +#361310 = VECTOR('',#361311,1.); +#361311 = DIRECTION('',(-1.,0.,0.)); +#361312 = PLANE('',#361313); +#361313 = AXIS2_PLACEMENT_3D('',#361314,#361315,#361316); +#361314 = CARTESIAN_POINT('',(132.148,-119.9,0.)); +#361315 = DIRECTION('',(0.,1.,0.)); +#361316 = DIRECTION('',(-1.,0.,0.)); +#361317 = ADVANCED_FACE('',(#361318),#361345,.T.); +#361318 = FACE_BOUND('',#361319,.F.); +#361319 = EDGE_LOOP('',(#361320,#361321,#361330,#361338)); +#361320 = ORIENTED_EDGE('',*,*,#361299,.T.); +#361321 = ORIENTED_EDGE('',*,*,#361322,.T.); +#361322 = EDGE_CURVE('',#361292,#361323,#361325,.T.); +#361323 = VERTEX_POINT('',#361324); +#361324 = CARTESIAN_POINT('',(131.7,-119.848,-4.E-02)); +#361325 = CIRCLE('',#361326,5.199847263152E-02); +#361326 = AXIS2_PLACEMENT_3D('',#361327,#361328,#361329); +#361327 = CARTESIAN_POINT('',(131.7519984726,-119.8480015273,-4.E-02)); +#361328 = DIRECTION('',(0.,0.,-1.)); +#361329 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361330 = ORIENTED_EDGE('',*,*,#361331,.F.); +#361331 = EDGE_CURVE('',#361332,#361323,#361334,.T.); +#361332 = VERTEX_POINT('',#361333); +#361333 = CARTESIAN_POINT('',(131.7,-119.848,0.)); +#361334 = LINE('',#361335,#361336); +#361335 = CARTESIAN_POINT('',(131.7,-119.848,0.)); +#361336 = VECTOR('',#361337,1.); +#361337 = DIRECTION('',(0.,0.,-1.)); +#361338 = ORIENTED_EDGE('',*,*,#361339,.F.); +#361339 = EDGE_CURVE('',#361300,#361332,#361340,.T.); +#361340 = CIRCLE('',#361341,5.199847263152E-02); +#361341 = AXIS2_PLACEMENT_3D('',#361342,#361343,#361344); +#361342 = CARTESIAN_POINT('',(131.7519984726,-119.8480015273,0.)); +#361343 = DIRECTION('',(0.,0.,-1.)); +#361344 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361345 = CYLINDRICAL_SURFACE('',#361346,5.199847263152E-02); +#361346 = AXIS2_PLACEMENT_3D('',#361347,#361348,#361349); +#361347 = CARTESIAN_POINT('',(131.7519984726,-119.8480015273,0.)); +#361348 = DIRECTION('',(-0.,-0.,1.)); +#361349 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361350 = ADVANCED_FACE('',(#361351),#361367,.F.); +#361351 = FACE_BOUND('',#361352,.F.); +#361352 = EDGE_LOOP('',(#361353,#361354,#361360,#361361)); +#361353 = ORIENTED_EDGE('',*,*,#361331,.T.); +#361354 = ORIENTED_EDGE('',*,*,#361355,.T.); +#361355 = EDGE_CURVE('',#361323,#361123,#361356,.T.); +#361356 = LINE('',#361357,#361358); +#361357 = CARTESIAN_POINT('',(131.7,-119.848,-4.E-02)); +#361358 = VECTOR('',#361359,1.); +#361359 = DIRECTION('',(0.,1.,0.)); +#361360 = ORIENTED_EDGE('',*,*,#361120,.F.); +#361361 = ORIENTED_EDGE('',*,*,#361362,.F.); +#361362 = EDGE_CURVE('',#361332,#361121,#361363,.T.); +#361363 = LINE('',#361364,#361365); +#361364 = CARTESIAN_POINT('',(131.7,-119.848,0.)); +#361365 = VECTOR('',#361366,1.); +#361366 = DIRECTION('',(0.,1.,0.)); +#361367 = PLANE('',#361368); +#361368 = AXIS2_PLACEMENT_3D('',#361369,#361370,#361371); +#361369 = CARTESIAN_POINT('',(131.7,-119.848,0.)); +#361370 = DIRECTION('',(1.,-0.,0.)); +#361371 = DIRECTION('',(0.,1.,0.)); +#361372 = ADVANCED_FACE('',(#361373),#361383,.F.); +#361373 = FACE_BOUND('',#361374,.F.); +#361374 = EDGE_LOOP('',(#361375,#361376,#361377,#361378,#361379,#361380, + #361381,#361382)); +#361375 = ORIENTED_EDGE('',*,*,#361147,.T.); +#361376 = ORIENTED_EDGE('',*,*,#361179,.T.); +#361377 = ORIENTED_EDGE('',*,*,#361211,.T.); +#361378 = ORIENTED_EDGE('',*,*,#361243,.T.); +#361379 = ORIENTED_EDGE('',*,*,#361275,.T.); +#361380 = ORIENTED_EDGE('',*,*,#361307,.T.); +#361381 = ORIENTED_EDGE('',*,*,#361339,.T.); +#361382 = ORIENTED_EDGE('',*,*,#361362,.T.); +#361383 = PLANE('',#361384); +#361384 = AXIS2_PLACEMENT_3D('',#361385,#361386,#361387); +#361385 = CARTESIAN_POINT('',(0.,0.,0.)); +#361386 = DIRECTION('',(-0.,-0.,-1.)); +#361387 = DIRECTION('',(-1.,0.,0.)); +#361388 = ADVANCED_FACE('',(#361389),#361399,.T.); +#361389 = FACE_BOUND('',#361390,.T.); +#361390 = EDGE_LOOP('',(#361391,#361392,#361393,#361394,#361395,#361396, + #361397,#361398)); +#361391 = ORIENTED_EDGE('',*,*,#361130,.T.); +#361392 = ORIENTED_EDGE('',*,*,#361163,.T.); +#361393 = ORIENTED_EDGE('',*,*,#361194,.T.); +#361394 = ORIENTED_EDGE('',*,*,#361227,.T.); +#361395 = ORIENTED_EDGE('',*,*,#361258,.T.); +#361396 = ORIENTED_EDGE('',*,*,#361291,.T.); +#361397 = ORIENTED_EDGE('',*,*,#361322,.T.); +#361398 = ORIENTED_EDGE('',*,*,#361355,.T.); +#361399 = PLANE('',#361400); +#361400 = AXIS2_PLACEMENT_3D('',#361401,#361402,#361403); +#361401 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#361402 = DIRECTION('',(-0.,-0.,-1.)); +#361403 = DIRECTION('',(-1.,0.,0.)); +#361404 = MANIFOLD_SOLID_BREP('',#361405); +#361405 = CLOSED_SHELL('',(#361406,#361448,#361479,#361512,#361543, + #361576,#361607,#361640,#361662,#361678)); +#361406 = ADVANCED_FACE('',(#361407),#361443,.T.); +#361407 = FACE_BOUND('',#361408,.F.); +#361408 = EDGE_LOOP('',(#361409,#361419,#361428,#361436)); +#361409 = ORIENTED_EDGE('',*,*,#361410,.T.); +#361410 = EDGE_CURVE('',#361411,#361413,#361415,.T.); +#361411 = VERTEX_POINT('',#361412); +#361412 = CARTESIAN_POINT('',(125.75,-123.815,0.)); +#361413 = VERTEX_POINT('',#361414); +#361414 = CARTESIAN_POINT('',(125.75,-123.815,-4.E-02)); +#361415 = LINE('',#361416,#361417); +#361416 = CARTESIAN_POINT('',(125.75,-123.815,0.)); +#361417 = VECTOR('',#361418,1.); +#361418 = DIRECTION('',(0.,0.,-1.)); +#361419 = ORIENTED_EDGE('',*,*,#361420,.T.); +#361420 = EDGE_CURVE('',#361413,#361421,#361423,.T.); +#361421 = VERTEX_POINT('',#361422); +#361422 = CARTESIAN_POINT('',(125.885,-123.68,-4.E-02)); +#361423 = CIRCLE('',#361424,0.135001418495); +#361424 = AXIS2_PLACEMENT_3D('',#361425,#361426,#361427); +#361425 = CARTESIAN_POINT('',(125.88500141848,-123.8150014184,-4.E-02)); +#361426 = DIRECTION('',(0.,0.,-1.)); +#361427 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#361428 = ORIENTED_EDGE('',*,*,#361429,.F.); +#361429 = EDGE_CURVE('',#361430,#361421,#361432,.T.); +#361430 = VERTEX_POINT('',#361431); +#361431 = CARTESIAN_POINT('',(125.885,-123.68,0.)); +#361432 = LINE('',#361433,#361434); +#361433 = CARTESIAN_POINT('',(125.885,-123.68,0.)); +#361434 = VECTOR('',#361435,1.); +#361435 = DIRECTION('',(0.,0.,-1.)); +#361436 = ORIENTED_EDGE('',*,*,#361437,.F.); +#361437 = EDGE_CURVE('',#361411,#361430,#361438,.T.); +#361438 = CIRCLE('',#361439,0.135001418495); +#361439 = AXIS2_PLACEMENT_3D('',#361440,#361441,#361442); +#361440 = CARTESIAN_POINT('',(125.88500141848,-123.8150014184,0.)); +#361441 = DIRECTION('',(0.,0.,-1.)); +#361442 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#361443 = CYLINDRICAL_SURFACE('',#361444,0.135001418495); +#361444 = AXIS2_PLACEMENT_3D('',#361445,#361446,#361447); +#361445 = CARTESIAN_POINT('',(125.88500141848,-123.8150014184,0.)); +#361446 = DIRECTION('',(-0.,-0.,1.)); +#361447 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#361448 = ADVANCED_FACE('',(#361449),#361474,.F.); +#361449 = FACE_BOUND('',#361450,.F.); +#361450 = EDGE_LOOP('',(#361451,#361452,#361460,#361468)); +#361451 = ORIENTED_EDGE('',*,*,#361429,.T.); +#361452 = ORIENTED_EDGE('',*,*,#361453,.T.); +#361453 = EDGE_CURVE('',#361421,#361454,#361456,.T.); +#361454 = VERTEX_POINT('',#361455); +#361455 = CARTESIAN_POINT('',(126.155,-123.68,-4.E-02)); +#361456 = LINE('',#361457,#361458); +#361457 = CARTESIAN_POINT('',(125.885,-123.68,-4.E-02)); +#361458 = VECTOR('',#361459,1.); +#361459 = DIRECTION('',(1.,0.,0.)); +#361460 = ORIENTED_EDGE('',*,*,#361461,.F.); +#361461 = EDGE_CURVE('',#361462,#361454,#361464,.T.); +#361462 = VERTEX_POINT('',#361463); +#361463 = CARTESIAN_POINT('',(126.155,-123.68,0.)); +#361464 = LINE('',#361465,#361466); +#361465 = CARTESIAN_POINT('',(126.155,-123.68,0.)); +#361466 = VECTOR('',#361467,1.); +#361467 = DIRECTION('',(0.,0.,-1.)); +#361468 = ORIENTED_EDGE('',*,*,#361469,.F.); +#361469 = EDGE_CURVE('',#361430,#361462,#361470,.T.); +#361470 = LINE('',#361471,#361472); +#361471 = CARTESIAN_POINT('',(125.885,-123.68,0.)); +#361472 = VECTOR('',#361473,1.); +#361473 = DIRECTION('',(1.,0.,0.)); +#361474 = PLANE('',#361475); +#361475 = AXIS2_PLACEMENT_3D('',#361476,#361477,#361478); +#361476 = CARTESIAN_POINT('',(125.885,-123.68,0.)); +#361477 = DIRECTION('',(0.,-1.,0.)); +#361478 = DIRECTION('',(1.,0.,0.)); +#361479 = ADVANCED_FACE('',(#361480),#361507,.T.); +#361480 = FACE_BOUND('',#361481,.F.); +#361481 = EDGE_LOOP('',(#361482,#361483,#361492,#361500)); +#361482 = ORIENTED_EDGE('',*,*,#361461,.T.); +#361483 = ORIENTED_EDGE('',*,*,#361484,.T.); +#361484 = EDGE_CURVE('',#361454,#361485,#361487,.T.); +#361485 = VERTEX_POINT('',#361486); +#361486 = CARTESIAN_POINT('',(126.29,-123.815,-4.E-02)); +#361487 = CIRCLE('',#361488,0.135001418495); +#361488 = AXIS2_PLACEMENT_3D('',#361489,#361490,#361491); +#361489 = CARTESIAN_POINT('',(126.15499858151,-123.8150014184,-4.E-02)); +#361490 = DIRECTION('',(0.,0.,-1.)); +#361491 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#361492 = ORIENTED_EDGE('',*,*,#361493,.F.); +#361493 = EDGE_CURVE('',#361494,#361485,#361496,.T.); +#361494 = VERTEX_POINT('',#361495); +#361495 = CARTESIAN_POINT('',(126.29,-123.815,0.)); +#361496 = LINE('',#361497,#361498); +#361497 = CARTESIAN_POINT('',(126.29,-123.815,0.)); +#361498 = VECTOR('',#361499,1.); +#361499 = DIRECTION('',(0.,0.,-1.)); +#361500 = ORIENTED_EDGE('',*,*,#361501,.F.); +#361501 = EDGE_CURVE('',#361462,#361494,#361502,.T.); +#361502 = CIRCLE('',#361503,0.135001418495); +#361503 = AXIS2_PLACEMENT_3D('',#361504,#361505,#361506); +#361504 = CARTESIAN_POINT('',(126.15499858151,-123.8150014184,0.)); +#361505 = DIRECTION('',(0.,0.,-1.)); +#361506 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#361507 = CYLINDRICAL_SURFACE('',#361508,0.135001418495); +#361508 = AXIS2_PLACEMENT_3D('',#361509,#361510,#361511); +#361509 = CARTESIAN_POINT('',(126.15499858151,-123.8150014184,0.)); +#361510 = DIRECTION('',(-0.,-0.,1.)); +#361511 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#361512 = ADVANCED_FACE('',(#361513),#361538,.F.); +#361513 = FACE_BOUND('',#361514,.F.); +#361514 = EDGE_LOOP('',(#361515,#361516,#361524,#361532)); +#361515 = ORIENTED_EDGE('',*,*,#361493,.T.); +#361516 = ORIENTED_EDGE('',*,*,#361517,.T.); +#361517 = EDGE_CURVE('',#361485,#361518,#361520,.T.); +#361518 = VERTEX_POINT('',#361519); +#361519 = CARTESIAN_POINT('',(126.29,-124.185,-4.E-02)); +#361520 = LINE('',#361521,#361522); +#361521 = CARTESIAN_POINT('',(126.29,-123.815,-4.E-02)); +#361522 = VECTOR('',#361523,1.); +#361523 = DIRECTION('',(0.,-1.,0.)); +#361524 = ORIENTED_EDGE('',*,*,#361525,.F.); +#361525 = EDGE_CURVE('',#361526,#361518,#361528,.T.); +#361526 = VERTEX_POINT('',#361527); +#361527 = CARTESIAN_POINT('',(126.29,-124.185,0.)); +#361528 = LINE('',#361529,#361530); +#361529 = CARTESIAN_POINT('',(126.29,-124.185,0.)); +#361530 = VECTOR('',#361531,1.); +#361531 = DIRECTION('',(0.,0.,-1.)); +#361532 = ORIENTED_EDGE('',*,*,#361533,.F.); +#361533 = EDGE_CURVE('',#361494,#361526,#361534,.T.); +#361534 = LINE('',#361535,#361536); +#361535 = CARTESIAN_POINT('',(126.29,-123.815,0.)); +#361536 = VECTOR('',#361537,1.); +#361537 = DIRECTION('',(0.,-1.,0.)); +#361538 = PLANE('',#361539); +#361539 = AXIS2_PLACEMENT_3D('',#361540,#361541,#361542); +#361540 = CARTESIAN_POINT('',(126.29,-123.815,0.)); +#361541 = DIRECTION('',(-1.,-0.,-0.)); +#361542 = DIRECTION('',(0.,-1.,0.)); +#361543 = ADVANCED_FACE('',(#361544),#361571,.T.); +#361544 = FACE_BOUND('',#361545,.F.); +#361545 = EDGE_LOOP('',(#361546,#361547,#361556,#361564)); +#361546 = ORIENTED_EDGE('',*,*,#361525,.T.); +#361547 = ORIENTED_EDGE('',*,*,#361548,.T.); +#361548 = EDGE_CURVE('',#361518,#361549,#361551,.T.); +#361549 = VERTEX_POINT('',#361550); +#361550 = CARTESIAN_POINT('',(126.155,-124.32,-4.E-02)); +#361551 = CIRCLE('',#361552,0.135001418495); +#361552 = AXIS2_PLACEMENT_3D('',#361553,#361554,#361555); +#361553 = CARTESIAN_POINT('',(126.15499858151,-124.1849985815,-4.E-02)); +#361554 = DIRECTION('',(0.,0.,-1.)); +#361555 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#361556 = ORIENTED_EDGE('',*,*,#361557,.F.); +#361557 = EDGE_CURVE('',#361558,#361549,#361560,.T.); +#361558 = VERTEX_POINT('',#361559); +#361559 = CARTESIAN_POINT('',(126.155,-124.32,0.)); +#361560 = LINE('',#361561,#361562); +#361561 = CARTESIAN_POINT('',(126.155,-124.32,0.)); +#361562 = VECTOR('',#361563,1.); +#361563 = DIRECTION('',(0.,0.,-1.)); +#361564 = ORIENTED_EDGE('',*,*,#361565,.F.); +#361565 = EDGE_CURVE('',#361526,#361558,#361566,.T.); +#361566 = CIRCLE('',#361567,0.135001418495); +#361567 = AXIS2_PLACEMENT_3D('',#361568,#361569,#361570); +#361568 = CARTESIAN_POINT('',(126.15499858151,-124.1849985815,0.)); +#361569 = DIRECTION('',(0.,0.,-1.)); +#361570 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#361571 = CYLINDRICAL_SURFACE('',#361572,0.135001418495); +#361572 = AXIS2_PLACEMENT_3D('',#361573,#361574,#361575); +#361573 = CARTESIAN_POINT('',(126.15499858151,-124.1849985815,0.)); +#361574 = DIRECTION('',(-0.,-0.,1.)); +#361575 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#361576 = ADVANCED_FACE('',(#361577),#361602,.F.); +#361577 = FACE_BOUND('',#361578,.F.); +#361578 = EDGE_LOOP('',(#361579,#361580,#361588,#361596)); +#361579 = ORIENTED_EDGE('',*,*,#361557,.T.); +#361580 = ORIENTED_EDGE('',*,*,#361581,.T.); +#361581 = EDGE_CURVE('',#361549,#361582,#361584,.T.); +#361582 = VERTEX_POINT('',#361583); +#361583 = CARTESIAN_POINT('',(125.885,-124.32,-4.E-02)); +#361584 = LINE('',#361585,#361586); +#361585 = CARTESIAN_POINT('',(126.155,-124.32,-4.E-02)); +#361586 = VECTOR('',#361587,1.); +#361587 = DIRECTION('',(-1.,0.,0.)); +#361588 = ORIENTED_EDGE('',*,*,#361589,.F.); +#361589 = EDGE_CURVE('',#361590,#361582,#361592,.T.); +#361590 = VERTEX_POINT('',#361591); +#361591 = CARTESIAN_POINT('',(125.885,-124.32,0.)); +#361592 = LINE('',#361593,#361594); +#361593 = CARTESIAN_POINT('',(125.885,-124.32,0.)); +#361594 = VECTOR('',#361595,1.); +#361595 = DIRECTION('',(0.,0.,-1.)); +#361596 = ORIENTED_EDGE('',*,*,#361597,.F.); +#361597 = EDGE_CURVE('',#361558,#361590,#361598,.T.); +#361598 = LINE('',#361599,#361600); +#361599 = CARTESIAN_POINT('',(126.155,-124.32,0.)); +#361600 = VECTOR('',#361601,1.); +#361601 = DIRECTION('',(-1.,0.,0.)); +#361602 = PLANE('',#361603); +#361603 = AXIS2_PLACEMENT_3D('',#361604,#361605,#361606); +#361604 = CARTESIAN_POINT('',(126.155,-124.32,0.)); +#361605 = DIRECTION('',(0.,1.,0.)); +#361606 = DIRECTION('',(-1.,0.,0.)); +#361607 = ADVANCED_FACE('',(#361608),#361635,.T.); +#361608 = FACE_BOUND('',#361609,.F.); +#361609 = EDGE_LOOP('',(#361610,#361611,#361620,#361628)); +#361610 = ORIENTED_EDGE('',*,*,#361589,.T.); +#361611 = ORIENTED_EDGE('',*,*,#361612,.T.); +#361612 = EDGE_CURVE('',#361582,#361613,#361615,.T.); +#361613 = VERTEX_POINT('',#361614); +#361614 = CARTESIAN_POINT('',(125.75,-124.185,-4.E-02)); +#361615 = CIRCLE('',#361616,0.135001418495); +#361616 = AXIS2_PLACEMENT_3D('',#361617,#361618,#361619); +#361617 = CARTESIAN_POINT('',(125.88500141848,-124.1849985815,-4.E-02)); +#361618 = DIRECTION('',(0.,0.,-1.)); +#361619 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361620 = ORIENTED_EDGE('',*,*,#361621,.F.); +#361621 = EDGE_CURVE('',#361622,#361613,#361624,.T.); +#361622 = VERTEX_POINT('',#361623); +#361623 = CARTESIAN_POINT('',(125.75,-124.185,0.)); +#361624 = LINE('',#361625,#361626); +#361625 = CARTESIAN_POINT('',(125.75,-124.185,0.)); +#361626 = VECTOR('',#361627,1.); +#361627 = DIRECTION('',(0.,0.,-1.)); +#361628 = ORIENTED_EDGE('',*,*,#361629,.F.); +#361629 = EDGE_CURVE('',#361590,#361622,#361630,.T.); +#361630 = CIRCLE('',#361631,0.135001418495); +#361631 = AXIS2_PLACEMENT_3D('',#361632,#361633,#361634); +#361632 = CARTESIAN_POINT('',(125.88500141848,-124.1849985815,0.)); +#361633 = DIRECTION('',(0.,0.,-1.)); +#361634 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361635 = CYLINDRICAL_SURFACE('',#361636,0.135001418495); +#361636 = AXIS2_PLACEMENT_3D('',#361637,#361638,#361639); +#361637 = CARTESIAN_POINT('',(125.88500141848,-124.1849985815,0.)); +#361638 = DIRECTION('',(-0.,-0.,1.)); +#361639 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#361640 = ADVANCED_FACE('',(#361641),#361657,.F.); +#361641 = FACE_BOUND('',#361642,.F.); +#361642 = EDGE_LOOP('',(#361643,#361644,#361650,#361651)); +#361643 = ORIENTED_EDGE('',*,*,#361621,.T.); +#361644 = ORIENTED_EDGE('',*,*,#361645,.T.); +#361645 = EDGE_CURVE('',#361613,#361413,#361646,.T.); +#361646 = LINE('',#361647,#361648); +#361647 = CARTESIAN_POINT('',(125.75,-124.185,-4.E-02)); +#361648 = VECTOR('',#361649,1.); +#361649 = DIRECTION('',(0.,1.,0.)); +#361650 = ORIENTED_EDGE('',*,*,#361410,.F.); +#361651 = ORIENTED_EDGE('',*,*,#361652,.F.); +#361652 = EDGE_CURVE('',#361622,#361411,#361653,.T.); +#361653 = LINE('',#361654,#361655); +#361654 = CARTESIAN_POINT('',(125.75,-124.185,0.)); +#361655 = VECTOR('',#361656,1.); +#361656 = DIRECTION('',(0.,1.,0.)); +#361657 = PLANE('',#361658); +#361658 = AXIS2_PLACEMENT_3D('',#361659,#361660,#361661); +#361659 = CARTESIAN_POINT('',(125.75,-124.185,0.)); +#361660 = DIRECTION('',(1.,-0.,0.)); +#361661 = DIRECTION('',(0.,1.,0.)); +#361662 = ADVANCED_FACE('',(#361663),#361673,.F.); +#361663 = FACE_BOUND('',#361664,.F.); +#361664 = EDGE_LOOP('',(#361665,#361666,#361667,#361668,#361669,#361670, + #361671,#361672)); +#361665 = ORIENTED_EDGE('',*,*,#361437,.T.); +#361666 = ORIENTED_EDGE('',*,*,#361469,.T.); +#361667 = ORIENTED_EDGE('',*,*,#361501,.T.); +#361668 = ORIENTED_EDGE('',*,*,#361533,.T.); +#361669 = ORIENTED_EDGE('',*,*,#361565,.T.); +#361670 = ORIENTED_EDGE('',*,*,#361597,.T.); +#361671 = ORIENTED_EDGE('',*,*,#361629,.T.); +#361672 = ORIENTED_EDGE('',*,*,#361652,.T.); +#361673 = PLANE('',#361674); +#361674 = AXIS2_PLACEMENT_3D('',#361675,#361676,#361677); +#361675 = CARTESIAN_POINT('',(0.,0.,0.)); +#361676 = DIRECTION('',(-0.,-0.,-1.)); +#361677 = DIRECTION('',(-1.,0.,0.)); +#361678 = ADVANCED_FACE('',(#361679),#361689,.T.); +#361679 = FACE_BOUND('',#361680,.T.); +#361680 = EDGE_LOOP('',(#361681,#361682,#361683,#361684,#361685,#361686, + #361687,#361688)); +#361681 = ORIENTED_EDGE('',*,*,#361420,.T.); +#361682 = ORIENTED_EDGE('',*,*,#361453,.T.); +#361683 = ORIENTED_EDGE('',*,*,#361484,.T.); +#361684 = ORIENTED_EDGE('',*,*,#361517,.T.); +#361685 = ORIENTED_EDGE('',*,*,#361548,.T.); +#361686 = ORIENTED_EDGE('',*,*,#361581,.T.); +#361687 = ORIENTED_EDGE('',*,*,#361612,.T.); +#361688 = ORIENTED_EDGE('',*,*,#361645,.T.); +#361689 = PLANE('',#361690); +#361690 = AXIS2_PLACEMENT_3D('',#361691,#361692,#361693); +#361691 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#361692 = DIRECTION('',(-0.,-0.,-1.)); +#361693 = DIRECTION('',(-1.,0.,0.)); +#361694 = MANIFOLD_SOLID_BREP('',#361695); +#361695 = CLOSED_SHELL('',(#361696,#361738,#361769,#361802,#361833, + #361866,#361897,#361930,#361952,#361968)); +#361696 = ADVANCED_FACE('',(#361697),#361733,.T.); +#361697 = FACE_BOUND('',#361698,.F.); +#361698 = EDGE_LOOP('',(#361699,#361709,#361718,#361726)); +#361699 = ORIENTED_EDGE('',*,*,#361700,.T.); +#361700 = EDGE_CURVE('',#361701,#361703,#361705,.T.); +#361701 = VERTEX_POINT('',#361702); +#361702 = CARTESIAN_POINT('',(131.7,-119.352,0.)); +#361703 = VERTEX_POINT('',#361704); +#361704 = CARTESIAN_POINT('',(131.7,-119.352,-4.E-02)); +#361705 = LINE('',#361706,#361707); +#361706 = CARTESIAN_POINT('',(131.7,-119.352,0.)); +#361707 = VECTOR('',#361708,1.); +#361708 = DIRECTION('',(0.,0.,-1.)); +#361709 = ORIENTED_EDGE('',*,*,#361710,.T.); +#361710 = EDGE_CURVE('',#361703,#361711,#361713,.T.); +#361711 = VERTEX_POINT('',#361712); +#361712 = CARTESIAN_POINT('',(131.752,-119.3,-4.E-02)); +#361713 = CIRCLE('',#361714,5.199847263153E-02); +#361714 = AXIS2_PLACEMENT_3D('',#361715,#361716,#361717); +#361715 = CARTESIAN_POINT('',(131.7519984726,-119.3519984726,-4.E-02)); +#361716 = DIRECTION('',(0.,0.,-1.)); +#361717 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#361718 = ORIENTED_EDGE('',*,*,#361719,.F.); +#361719 = EDGE_CURVE('',#361720,#361711,#361722,.T.); +#361720 = VERTEX_POINT('',#361721); +#361721 = CARTESIAN_POINT('',(131.752,-119.3,0.)); +#361722 = LINE('',#361723,#361724); +#361723 = CARTESIAN_POINT('',(131.752,-119.3,0.)); +#361724 = VECTOR('',#361725,1.); +#361725 = DIRECTION('',(0.,0.,-1.)); +#361726 = ORIENTED_EDGE('',*,*,#361727,.F.); +#361727 = EDGE_CURVE('',#361701,#361720,#361728,.T.); +#361728 = CIRCLE('',#361729,5.199847263153E-02); +#361729 = AXIS2_PLACEMENT_3D('',#361730,#361731,#361732); +#361730 = CARTESIAN_POINT('',(131.7519984726,-119.3519984726,0.)); +#361731 = DIRECTION('',(0.,0.,-1.)); +#361732 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#361733 = CYLINDRICAL_SURFACE('',#361734,5.199847263153E-02); +#361734 = AXIS2_PLACEMENT_3D('',#361735,#361736,#361737); +#361735 = CARTESIAN_POINT('',(131.7519984726,-119.3519984726,0.)); +#361736 = DIRECTION('',(-0.,-0.,1.)); +#361737 = DIRECTION('',(-0.999999999569,-2.93737645661E-05,-0.)); +#361738 = ADVANCED_FACE('',(#361739),#361764,.F.); +#361739 = FACE_BOUND('',#361740,.F.); +#361740 = EDGE_LOOP('',(#361741,#361742,#361750,#361758)); +#361741 = ORIENTED_EDGE('',*,*,#361719,.T.); +#361742 = ORIENTED_EDGE('',*,*,#361743,.T.); +#361743 = EDGE_CURVE('',#361711,#361744,#361746,.T.); +#361744 = VERTEX_POINT('',#361745); +#361745 = CARTESIAN_POINT('',(132.148,-119.3,-4.E-02)); +#361746 = LINE('',#361747,#361748); +#361747 = CARTESIAN_POINT('',(131.752,-119.3,-4.E-02)); +#361748 = VECTOR('',#361749,1.); +#361749 = DIRECTION('',(1.,0.,0.)); +#361750 = ORIENTED_EDGE('',*,*,#361751,.F.); +#361751 = EDGE_CURVE('',#361752,#361744,#361754,.T.); +#361752 = VERTEX_POINT('',#361753); +#361753 = CARTESIAN_POINT('',(132.148,-119.3,0.)); +#361754 = LINE('',#361755,#361756); +#361755 = CARTESIAN_POINT('',(132.148,-119.3,0.)); +#361756 = VECTOR('',#361757,1.); +#361757 = DIRECTION('',(0.,0.,-1.)); +#361758 = ORIENTED_EDGE('',*,*,#361759,.F.); +#361759 = EDGE_CURVE('',#361720,#361752,#361760,.T.); +#361760 = LINE('',#361761,#361762); +#361761 = CARTESIAN_POINT('',(131.752,-119.3,0.)); +#361762 = VECTOR('',#361763,1.); +#361763 = DIRECTION('',(1.,0.,0.)); +#361764 = PLANE('',#361765); +#361765 = AXIS2_PLACEMENT_3D('',#361766,#361767,#361768); +#361766 = CARTESIAN_POINT('',(131.752,-119.3,0.)); +#361767 = DIRECTION('',(0.,-1.,0.)); +#361768 = DIRECTION('',(1.,0.,0.)); +#361769 = ADVANCED_FACE('',(#361770),#361797,.T.); +#361770 = FACE_BOUND('',#361771,.F.); +#361771 = EDGE_LOOP('',(#361772,#361773,#361782,#361790)); +#361772 = ORIENTED_EDGE('',*,*,#361751,.T.); +#361773 = ORIENTED_EDGE('',*,*,#361774,.T.); +#361774 = EDGE_CURVE('',#361744,#361775,#361777,.T.); +#361775 = VERTEX_POINT('',#361776); +#361776 = CARTESIAN_POINT('',(132.2,-119.352,-4.E-02)); +#361777 = CIRCLE('',#361778,5.199847263156E-02); +#361778 = AXIS2_PLACEMENT_3D('',#361779,#361780,#361781); +#361779 = CARTESIAN_POINT('',(132.14800152739,-119.3519984726,-4.E-02)); +#361780 = DIRECTION('',(0.,0.,-1.)); +#361781 = DIRECTION('',(-2.937376429278E-05,0.999999999569,0.)); +#361782 = ORIENTED_EDGE('',*,*,#361783,.F.); +#361783 = EDGE_CURVE('',#361784,#361775,#361786,.T.); +#361784 = VERTEX_POINT('',#361785); +#361785 = CARTESIAN_POINT('',(132.2,-119.352,0.)); +#361786 = LINE('',#361787,#361788); +#361787 = CARTESIAN_POINT('',(132.2,-119.352,0.)); +#361788 = VECTOR('',#361789,1.); +#361789 = DIRECTION('',(0.,0.,-1.)); +#361790 = ORIENTED_EDGE('',*,*,#361791,.F.); +#361791 = EDGE_CURVE('',#361752,#361784,#361792,.T.); +#361792 = CIRCLE('',#361793,5.199847263156E-02); +#361793 = AXIS2_PLACEMENT_3D('',#361794,#361795,#361796); +#361794 = CARTESIAN_POINT('',(132.14800152739,-119.3519984726,0.)); +#361795 = DIRECTION('',(0.,0.,-1.)); +#361796 = DIRECTION('',(-2.937376429278E-05,0.999999999569,0.)); +#361797 = CYLINDRICAL_SURFACE('',#361798,5.199847263156E-02); +#361798 = AXIS2_PLACEMENT_3D('',#361799,#361800,#361801); +#361799 = CARTESIAN_POINT('',(132.14800152739,-119.3519984726,0.)); +#361800 = DIRECTION('',(-0.,-0.,1.)); +#361801 = DIRECTION('',(-2.937376429278E-05,0.999999999569,0.)); +#361802 = ADVANCED_FACE('',(#361803),#361828,.F.); +#361803 = FACE_BOUND('',#361804,.F.); +#361804 = EDGE_LOOP('',(#361805,#361806,#361814,#361822)); +#361805 = ORIENTED_EDGE('',*,*,#361783,.T.); +#361806 = ORIENTED_EDGE('',*,*,#361807,.T.); +#361807 = EDGE_CURVE('',#361775,#361808,#361810,.T.); +#361808 = VERTEX_POINT('',#361809); +#361809 = CARTESIAN_POINT('',(132.2,-119.448,-4.E-02)); +#361810 = LINE('',#361811,#361812); +#361811 = CARTESIAN_POINT('',(132.2,-119.352,-4.E-02)); +#361812 = VECTOR('',#361813,1.); +#361813 = DIRECTION('',(0.,-1.,0.)); +#361814 = ORIENTED_EDGE('',*,*,#361815,.F.); +#361815 = EDGE_CURVE('',#361816,#361808,#361818,.T.); +#361816 = VERTEX_POINT('',#361817); +#361817 = CARTESIAN_POINT('',(132.2,-119.448,0.)); +#361818 = LINE('',#361819,#361820); +#361819 = CARTESIAN_POINT('',(132.2,-119.448,0.)); +#361820 = VECTOR('',#361821,1.); +#361821 = DIRECTION('',(0.,0.,-1.)); +#361822 = ORIENTED_EDGE('',*,*,#361823,.F.); +#361823 = EDGE_CURVE('',#361784,#361816,#361824,.T.); +#361824 = LINE('',#361825,#361826); +#361825 = CARTESIAN_POINT('',(132.2,-119.352,0.)); +#361826 = VECTOR('',#361827,1.); +#361827 = DIRECTION('',(0.,-1.,0.)); +#361828 = PLANE('',#361829); +#361829 = AXIS2_PLACEMENT_3D('',#361830,#361831,#361832); +#361830 = CARTESIAN_POINT('',(132.2,-119.352,0.)); +#361831 = DIRECTION('',(-1.,-0.,-0.)); +#361832 = DIRECTION('',(0.,-1.,0.)); +#361833 = ADVANCED_FACE('',(#361834),#361861,.T.); +#361834 = FACE_BOUND('',#361835,.F.); +#361835 = EDGE_LOOP('',(#361836,#361837,#361846,#361854)); +#361836 = ORIENTED_EDGE('',*,*,#361815,.T.); +#361837 = ORIENTED_EDGE('',*,*,#361838,.T.); +#361838 = EDGE_CURVE('',#361808,#361839,#361841,.T.); +#361839 = VERTEX_POINT('',#361840); +#361840 = CARTESIAN_POINT('',(132.148,-119.5,-4.E-02)); +#361841 = CIRCLE('',#361842,5.199847263154E-02); +#361842 = AXIS2_PLACEMENT_3D('',#361843,#361844,#361845); +#361843 = CARTESIAN_POINT('',(132.14800152739,-119.4480015273,-4.E-02)); +#361844 = DIRECTION('',(0.,0.,-1.)); +#361845 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361846 = ORIENTED_EDGE('',*,*,#361847,.F.); +#361847 = EDGE_CURVE('',#361848,#361839,#361850,.T.); +#361848 = VERTEX_POINT('',#361849); +#361849 = CARTESIAN_POINT('',(132.148,-119.5,0.)); +#361850 = LINE('',#361851,#361852); +#361851 = CARTESIAN_POINT('',(132.148,-119.5,0.)); +#361852 = VECTOR('',#361853,1.); +#361853 = DIRECTION('',(0.,0.,-1.)); +#361854 = ORIENTED_EDGE('',*,*,#361855,.F.); +#361855 = EDGE_CURVE('',#361816,#361848,#361856,.T.); +#361856 = CIRCLE('',#361857,5.199847263154E-02); +#361857 = AXIS2_PLACEMENT_3D('',#361858,#361859,#361860); +#361858 = CARTESIAN_POINT('',(132.14800152739,-119.4480015273,0.)); +#361859 = DIRECTION('',(0.,0.,-1.)); +#361860 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361861 = CYLINDRICAL_SURFACE('',#361862,5.199847263154E-02); +#361862 = AXIS2_PLACEMENT_3D('',#361863,#361864,#361865); +#361863 = CARTESIAN_POINT('',(132.14800152739,-119.4480015273,0.)); +#361864 = DIRECTION('',(-0.,-0.,1.)); +#361865 = DIRECTION('',(0.999999999569,2.937376483937E-05,0.)); +#361866 = ADVANCED_FACE('',(#361867),#361892,.F.); +#361867 = FACE_BOUND('',#361868,.F.); +#361868 = EDGE_LOOP('',(#361869,#361870,#361878,#361886)); +#361869 = ORIENTED_EDGE('',*,*,#361847,.T.); +#361870 = ORIENTED_EDGE('',*,*,#361871,.T.); +#361871 = EDGE_CURVE('',#361839,#361872,#361874,.T.); +#361872 = VERTEX_POINT('',#361873); +#361873 = CARTESIAN_POINT('',(131.752,-119.5,-4.E-02)); +#361874 = LINE('',#361875,#361876); +#361875 = CARTESIAN_POINT('',(132.148,-119.5,-4.E-02)); +#361876 = VECTOR('',#361877,1.); +#361877 = DIRECTION('',(-1.,0.,0.)); +#361878 = ORIENTED_EDGE('',*,*,#361879,.F.); +#361879 = EDGE_CURVE('',#361880,#361872,#361882,.T.); +#361880 = VERTEX_POINT('',#361881); +#361881 = CARTESIAN_POINT('',(131.752,-119.5,0.)); +#361882 = LINE('',#361883,#361884); +#361883 = CARTESIAN_POINT('',(131.752,-119.5,0.)); +#361884 = VECTOR('',#361885,1.); +#361885 = DIRECTION('',(0.,0.,-1.)); +#361886 = ORIENTED_EDGE('',*,*,#361887,.F.); +#361887 = EDGE_CURVE('',#361848,#361880,#361888,.T.); +#361888 = LINE('',#361889,#361890); +#361889 = CARTESIAN_POINT('',(132.148,-119.5,0.)); +#361890 = VECTOR('',#361891,1.); +#361891 = DIRECTION('',(-1.,0.,0.)); +#361892 = PLANE('',#361893); +#361893 = AXIS2_PLACEMENT_3D('',#361894,#361895,#361896); +#361894 = CARTESIAN_POINT('',(132.148,-119.5,0.)); +#361895 = DIRECTION('',(0.,1.,0.)); +#361896 = DIRECTION('',(-1.,0.,0.)); +#361897 = ADVANCED_FACE('',(#361898),#361925,.T.); +#361898 = FACE_BOUND('',#361899,.F.); +#361899 = EDGE_LOOP('',(#361900,#361901,#361910,#361918)); +#361900 = ORIENTED_EDGE('',*,*,#361879,.T.); +#361901 = ORIENTED_EDGE('',*,*,#361902,.T.); +#361902 = EDGE_CURVE('',#361872,#361903,#361905,.T.); +#361903 = VERTEX_POINT('',#361904); +#361904 = CARTESIAN_POINT('',(131.7,-119.448,-4.E-02)); +#361905 = CIRCLE('',#361906,5.199847263152E-02); +#361906 = AXIS2_PLACEMENT_3D('',#361907,#361908,#361909); +#361907 = CARTESIAN_POINT('',(131.7519984726,-119.4480015273,-4.E-02)); +#361908 = DIRECTION('',(0.,0.,-1.)); +#361909 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361910 = ORIENTED_EDGE('',*,*,#361911,.F.); +#361911 = EDGE_CURVE('',#361912,#361903,#361914,.T.); +#361912 = VERTEX_POINT('',#361913); +#361913 = CARTESIAN_POINT('',(131.7,-119.448,0.)); +#361914 = LINE('',#361915,#361916); +#361915 = CARTESIAN_POINT('',(131.7,-119.448,0.)); +#361916 = VECTOR('',#361917,1.); +#361917 = DIRECTION('',(0.,0.,-1.)); +#361918 = ORIENTED_EDGE('',*,*,#361919,.F.); +#361919 = EDGE_CURVE('',#361880,#361912,#361920,.T.); +#361920 = CIRCLE('',#361921,5.199847263152E-02); +#361921 = AXIS2_PLACEMENT_3D('',#361922,#361923,#361924); +#361922 = CARTESIAN_POINT('',(131.7519984726,-119.4480015273,0.)); +#361923 = DIRECTION('',(0.,0.,-1.)); +#361924 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361925 = CYLINDRICAL_SURFACE('',#361926,5.199847263152E-02); +#361926 = AXIS2_PLACEMENT_3D('',#361927,#361928,#361929); +#361927 = CARTESIAN_POINT('',(131.7519984726,-119.4480015273,0.)); +#361928 = DIRECTION('',(-0.,-0.,1.)); +#361929 = DIRECTION('',(2.937376538597E-05,-0.999999999569,0.)); +#361930 = ADVANCED_FACE('',(#361931),#361947,.F.); +#361931 = FACE_BOUND('',#361932,.F.); +#361932 = EDGE_LOOP('',(#361933,#361934,#361940,#361941)); +#361933 = ORIENTED_EDGE('',*,*,#361911,.T.); +#361934 = ORIENTED_EDGE('',*,*,#361935,.T.); +#361935 = EDGE_CURVE('',#361903,#361703,#361936,.T.); +#361936 = LINE('',#361937,#361938); +#361937 = CARTESIAN_POINT('',(131.7,-119.448,-4.E-02)); +#361938 = VECTOR('',#361939,1.); +#361939 = DIRECTION('',(0.,1.,0.)); +#361940 = ORIENTED_EDGE('',*,*,#361700,.F.); +#361941 = ORIENTED_EDGE('',*,*,#361942,.F.); +#361942 = EDGE_CURVE('',#361912,#361701,#361943,.T.); +#361943 = LINE('',#361944,#361945); +#361944 = CARTESIAN_POINT('',(131.7,-119.448,0.)); +#361945 = VECTOR('',#361946,1.); +#361946 = DIRECTION('',(0.,1.,0.)); +#361947 = PLANE('',#361948); +#361948 = AXIS2_PLACEMENT_3D('',#361949,#361950,#361951); +#361949 = CARTESIAN_POINT('',(131.7,-119.448,0.)); +#361950 = DIRECTION('',(1.,-0.,0.)); +#361951 = DIRECTION('',(0.,1.,0.)); +#361952 = ADVANCED_FACE('',(#361953),#361963,.F.); +#361953 = FACE_BOUND('',#361954,.F.); +#361954 = EDGE_LOOP('',(#361955,#361956,#361957,#361958,#361959,#361960, + #361961,#361962)); +#361955 = ORIENTED_EDGE('',*,*,#361727,.T.); +#361956 = ORIENTED_EDGE('',*,*,#361759,.T.); +#361957 = ORIENTED_EDGE('',*,*,#361791,.T.); +#361958 = ORIENTED_EDGE('',*,*,#361823,.T.); +#361959 = ORIENTED_EDGE('',*,*,#361855,.T.); +#361960 = ORIENTED_EDGE('',*,*,#361887,.T.); +#361961 = ORIENTED_EDGE('',*,*,#361919,.T.); +#361962 = ORIENTED_EDGE('',*,*,#361942,.T.); +#361963 = PLANE('',#361964); +#361964 = AXIS2_PLACEMENT_3D('',#361965,#361966,#361967); +#361965 = CARTESIAN_POINT('',(0.,0.,0.)); +#361966 = DIRECTION('',(-0.,-0.,-1.)); +#361967 = DIRECTION('',(-1.,0.,0.)); +#361968 = ADVANCED_FACE('',(#361969),#361979,.T.); +#361969 = FACE_BOUND('',#361970,.T.); +#361970 = EDGE_LOOP('',(#361971,#361972,#361973,#361974,#361975,#361976, + #361977,#361978)); +#361971 = ORIENTED_EDGE('',*,*,#361710,.T.); +#361972 = ORIENTED_EDGE('',*,*,#361743,.T.); +#361973 = ORIENTED_EDGE('',*,*,#361774,.T.); +#361974 = ORIENTED_EDGE('',*,*,#361807,.T.); +#361975 = ORIENTED_EDGE('',*,*,#361838,.T.); +#361976 = ORIENTED_EDGE('',*,*,#361871,.T.); +#361977 = ORIENTED_EDGE('',*,*,#361902,.T.); +#361978 = ORIENTED_EDGE('',*,*,#361935,.T.); +#361979 = PLANE('',#361980); +#361980 = AXIS2_PLACEMENT_3D('',#361981,#361982,#361983); +#361981 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#361982 = DIRECTION('',(-0.,-0.,-1.)); +#361983 = DIRECTION('',(-1.,0.,0.)); +#361984 = MANIFOLD_SOLID_BREP('',#361985); +#361985 = CLOSED_SHELL('',(#361986,#362028,#362059,#362092,#362123, + #362156,#362187,#362220,#362242,#362258)); +#361986 = ADVANCED_FACE('',(#361987),#362023,.T.); +#361987 = FACE_BOUND('',#361988,.F.); +#361988 = EDGE_LOOP('',(#361989,#361999,#362008,#362016)); +#361989 = ORIENTED_EDGE('',*,*,#361990,.T.); +#361990 = EDGE_CURVE('',#361991,#361993,#361995,.T.); +#361991 = VERTEX_POINT('',#361992); +#361992 = CARTESIAN_POINT('',(125.75,-122.315,0.)); +#361993 = VERTEX_POINT('',#361994); +#361994 = CARTESIAN_POINT('',(125.75,-122.315,-4.E-02)); +#361995 = LINE('',#361996,#361997); +#361996 = CARTESIAN_POINT('',(125.75,-122.315,0.)); +#361997 = VECTOR('',#361998,1.); +#361998 = DIRECTION('',(0.,0.,-1.)); +#361999 = ORIENTED_EDGE('',*,*,#362000,.T.); +#362000 = EDGE_CURVE('',#361993,#362001,#362003,.T.); +#362001 = VERTEX_POINT('',#362002); +#362002 = CARTESIAN_POINT('',(125.885,-122.18,-4.E-02)); +#362003 = CIRCLE('',#362004,0.135001418495); +#362004 = AXIS2_PLACEMENT_3D('',#362005,#362006,#362007); +#362005 = CARTESIAN_POINT('',(125.88500141848,-122.3150014184,-4.E-02)); +#362006 = DIRECTION('',(0.,0.,-1.)); +#362007 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362008 = ORIENTED_EDGE('',*,*,#362009,.F.); +#362009 = EDGE_CURVE('',#362010,#362001,#362012,.T.); +#362010 = VERTEX_POINT('',#362011); +#362011 = CARTESIAN_POINT('',(125.885,-122.18,0.)); +#362012 = LINE('',#362013,#362014); +#362013 = CARTESIAN_POINT('',(125.885,-122.18,0.)); +#362014 = VECTOR('',#362015,1.); +#362015 = DIRECTION('',(0.,0.,-1.)); +#362016 = ORIENTED_EDGE('',*,*,#362017,.F.); +#362017 = EDGE_CURVE('',#361991,#362010,#362018,.T.); +#362018 = CIRCLE('',#362019,0.135001418495); +#362019 = AXIS2_PLACEMENT_3D('',#362020,#362021,#362022); +#362020 = CARTESIAN_POINT('',(125.88500141848,-122.3150014184,0.)); +#362021 = DIRECTION('',(0.,0.,-1.)); +#362022 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362023 = CYLINDRICAL_SURFACE('',#362024,0.135001418495); +#362024 = AXIS2_PLACEMENT_3D('',#362025,#362026,#362027); +#362025 = CARTESIAN_POINT('',(125.88500141848,-122.3150014184,0.)); +#362026 = DIRECTION('',(-0.,-0.,1.)); +#362027 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362028 = ADVANCED_FACE('',(#362029),#362054,.F.); +#362029 = FACE_BOUND('',#362030,.F.); +#362030 = EDGE_LOOP('',(#362031,#362032,#362040,#362048)); +#362031 = ORIENTED_EDGE('',*,*,#362009,.T.); +#362032 = ORIENTED_EDGE('',*,*,#362033,.T.); +#362033 = EDGE_CURVE('',#362001,#362034,#362036,.T.); +#362034 = VERTEX_POINT('',#362035); +#362035 = CARTESIAN_POINT('',(126.155,-122.18,-4.E-02)); +#362036 = LINE('',#362037,#362038); +#362037 = CARTESIAN_POINT('',(125.885,-122.18,-4.E-02)); +#362038 = VECTOR('',#362039,1.); +#362039 = DIRECTION('',(1.,0.,0.)); +#362040 = ORIENTED_EDGE('',*,*,#362041,.F.); +#362041 = EDGE_CURVE('',#362042,#362034,#362044,.T.); +#362042 = VERTEX_POINT('',#362043); +#362043 = CARTESIAN_POINT('',(126.155,-122.18,0.)); +#362044 = LINE('',#362045,#362046); +#362045 = CARTESIAN_POINT('',(126.155,-122.18,0.)); +#362046 = VECTOR('',#362047,1.); +#362047 = DIRECTION('',(0.,0.,-1.)); +#362048 = ORIENTED_EDGE('',*,*,#362049,.F.); +#362049 = EDGE_CURVE('',#362010,#362042,#362050,.T.); +#362050 = LINE('',#362051,#362052); +#362051 = CARTESIAN_POINT('',(125.885,-122.18,0.)); +#362052 = VECTOR('',#362053,1.); +#362053 = DIRECTION('',(1.,0.,0.)); +#362054 = PLANE('',#362055); +#362055 = AXIS2_PLACEMENT_3D('',#362056,#362057,#362058); +#362056 = CARTESIAN_POINT('',(125.885,-122.18,0.)); +#362057 = DIRECTION('',(0.,-1.,0.)); +#362058 = DIRECTION('',(1.,0.,0.)); +#362059 = ADVANCED_FACE('',(#362060),#362087,.T.); +#362060 = FACE_BOUND('',#362061,.F.); +#362061 = EDGE_LOOP('',(#362062,#362063,#362072,#362080)); +#362062 = ORIENTED_EDGE('',*,*,#362041,.T.); +#362063 = ORIENTED_EDGE('',*,*,#362064,.T.); +#362064 = EDGE_CURVE('',#362034,#362065,#362067,.T.); +#362065 = VERTEX_POINT('',#362066); +#362066 = CARTESIAN_POINT('',(126.29,-122.315,-4.E-02)); +#362067 = CIRCLE('',#362068,0.135001418495); +#362068 = AXIS2_PLACEMENT_3D('',#362069,#362070,#362071); +#362069 = CARTESIAN_POINT('',(126.15499858151,-122.3150014184,-4.E-02)); +#362070 = DIRECTION('',(0.,0.,-1.)); +#362071 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#362072 = ORIENTED_EDGE('',*,*,#362073,.F.); +#362073 = EDGE_CURVE('',#362074,#362065,#362076,.T.); +#362074 = VERTEX_POINT('',#362075); +#362075 = CARTESIAN_POINT('',(126.29,-122.315,0.)); +#362076 = LINE('',#362077,#362078); +#362077 = CARTESIAN_POINT('',(126.29,-122.315,0.)); +#362078 = VECTOR('',#362079,1.); +#362079 = DIRECTION('',(0.,0.,-1.)); +#362080 = ORIENTED_EDGE('',*,*,#362081,.F.); +#362081 = EDGE_CURVE('',#362042,#362074,#362082,.T.); +#362082 = CIRCLE('',#362083,0.135001418495); +#362083 = AXIS2_PLACEMENT_3D('',#362084,#362085,#362086); +#362084 = CARTESIAN_POINT('',(126.15499858151,-122.3150014184,0.)); +#362085 = DIRECTION('',(0.,0.,-1.)); +#362086 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#362087 = CYLINDRICAL_SURFACE('',#362088,0.135001418495); +#362088 = AXIS2_PLACEMENT_3D('',#362089,#362090,#362091); +#362089 = CARTESIAN_POINT('',(126.15499858151,-122.3150014184,0.)); +#362090 = DIRECTION('',(-0.,-0.,1.)); +#362091 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#362092 = ADVANCED_FACE('',(#362093),#362118,.F.); +#362093 = FACE_BOUND('',#362094,.F.); +#362094 = EDGE_LOOP('',(#362095,#362096,#362104,#362112)); +#362095 = ORIENTED_EDGE('',*,*,#362073,.T.); +#362096 = ORIENTED_EDGE('',*,*,#362097,.T.); +#362097 = EDGE_CURVE('',#362065,#362098,#362100,.T.); +#362098 = VERTEX_POINT('',#362099); +#362099 = CARTESIAN_POINT('',(126.29,-122.685,-4.E-02)); +#362100 = LINE('',#362101,#362102); +#362101 = CARTESIAN_POINT('',(126.29,-122.315,-4.E-02)); +#362102 = VECTOR('',#362103,1.); +#362103 = DIRECTION('',(0.,-1.,0.)); +#362104 = ORIENTED_EDGE('',*,*,#362105,.F.); +#362105 = EDGE_CURVE('',#362106,#362098,#362108,.T.); +#362106 = VERTEX_POINT('',#362107); +#362107 = CARTESIAN_POINT('',(126.29,-122.685,0.)); +#362108 = LINE('',#362109,#362110); +#362109 = CARTESIAN_POINT('',(126.29,-122.685,0.)); +#362110 = VECTOR('',#362111,1.); +#362111 = DIRECTION('',(0.,0.,-1.)); +#362112 = ORIENTED_EDGE('',*,*,#362113,.F.); +#362113 = EDGE_CURVE('',#362074,#362106,#362114,.T.); +#362114 = LINE('',#362115,#362116); +#362115 = CARTESIAN_POINT('',(126.29,-122.315,0.)); +#362116 = VECTOR('',#362117,1.); +#362117 = DIRECTION('',(0.,-1.,0.)); +#362118 = PLANE('',#362119); +#362119 = AXIS2_PLACEMENT_3D('',#362120,#362121,#362122); +#362120 = CARTESIAN_POINT('',(126.29,-122.315,0.)); +#362121 = DIRECTION('',(-1.,-0.,-0.)); +#362122 = DIRECTION('',(0.,-1.,0.)); +#362123 = ADVANCED_FACE('',(#362124),#362151,.T.); +#362124 = FACE_BOUND('',#362125,.F.); +#362125 = EDGE_LOOP('',(#362126,#362127,#362136,#362144)); +#362126 = ORIENTED_EDGE('',*,*,#362105,.T.); +#362127 = ORIENTED_EDGE('',*,*,#362128,.T.); +#362128 = EDGE_CURVE('',#362098,#362129,#362131,.T.); +#362129 = VERTEX_POINT('',#362130); +#362130 = CARTESIAN_POINT('',(126.155,-122.82,-4.E-02)); +#362131 = CIRCLE('',#362132,0.135001418495); +#362132 = AXIS2_PLACEMENT_3D('',#362133,#362134,#362135); +#362133 = CARTESIAN_POINT('',(126.15499858151,-122.6849985815,-4.E-02)); +#362134 = DIRECTION('',(0.,0.,-1.)); +#362135 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#362136 = ORIENTED_EDGE('',*,*,#362137,.F.); +#362137 = EDGE_CURVE('',#362138,#362129,#362140,.T.); +#362138 = VERTEX_POINT('',#362139); +#362139 = CARTESIAN_POINT('',(126.155,-122.82,0.)); +#362140 = LINE('',#362141,#362142); +#362141 = CARTESIAN_POINT('',(126.155,-122.82,0.)); +#362142 = VECTOR('',#362143,1.); +#362143 = DIRECTION('',(0.,0.,-1.)); +#362144 = ORIENTED_EDGE('',*,*,#362145,.F.); +#362145 = EDGE_CURVE('',#362106,#362138,#362146,.T.); +#362146 = CIRCLE('',#362147,0.135001418495); +#362147 = AXIS2_PLACEMENT_3D('',#362148,#362149,#362150); +#362148 = CARTESIAN_POINT('',(126.15499858151,-122.6849985815,0.)); +#362149 = DIRECTION('',(0.,0.,-1.)); +#362150 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#362151 = CYLINDRICAL_SURFACE('',#362152,0.135001418495); +#362152 = AXIS2_PLACEMENT_3D('',#362153,#362154,#362155); +#362153 = CARTESIAN_POINT('',(126.15499858151,-122.6849985815,0.)); +#362154 = DIRECTION('',(-0.,-0.,1.)); +#362155 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#362156 = ADVANCED_FACE('',(#362157),#362182,.F.); +#362157 = FACE_BOUND('',#362158,.F.); +#362158 = EDGE_LOOP('',(#362159,#362160,#362168,#362176)); +#362159 = ORIENTED_EDGE('',*,*,#362137,.T.); +#362160 = ORIENTED_EDGE('',*,*,#362161,.T.); +#362161 = EDGE_CURVE('',#362129,#362162,#362164,.T.); +#362162 = VERTEX_POINT('',#362163); +#362163 = CARTESIAN_POINT('',(125.885,-122.82,-4.E-02)); +#362164 = LINE('',#362165,#362166); +#362165 = CARTESIAN_POINT('',(126.155,-122.82,-4.E-02)); +#362166 = VECTOR('',#362167,1.); +#362167 = DIRECTION('',(-1.,0.,0.)); +#362168 = ORIENTED_EDGE('',*,*,#362169,.F.); +#362169 = EDGE_CURVE('',#362170,#362162,#362172,.T.); +#362170 = VERTEX_POINT('',#362171); +#362171 = CARTESIAN_POINT('',(125.885,-122.82,0.)); +#362172 = LINE('',#362173,#362174); +#362173 = CARTESIAN_POINT('',(125.885,-122.82,0.)); +#362174 = VECTOR('',#362175,1.); +#362175 = DIRECTION('',(0.,0.,-1.)); +#362176 = ORIENTED_EDGE('',*,*,#362177,.F.); +#362177 = EDGE_CURVE('',#362138,#362170,#362178,.T.); +#362178 = LINE('',#362179,#362180); +#362179 = CARTESIAN_POINT('',(126.155,-122.82,0.)); +#362180 = VECTOR('',#362181,1.); +#362181 = DIRECTION('',(-1.,0.,0.)); +#362182 = PLANE('',#362183); +#362183 = AXIS2_PLACEMENT_3D('',#362184,#362185,#362186); +#362184 = CARTESIAN_POINT('',(126.155,-122.82,0.)); +#362185 = DIRECTION('',(0.,1.,0.)); +#362186 = DIRECTION('',(-1.,0.,0.)); +#362187 = ADVANCED_FACE('',(#362188),#362215,.T.); +#362188 = FACE_BOUND('',#362189,.F.); +#362189 = EDGE_LOOP('',(#362190,#362191,#362200,#362208)); +#362190 = ORIENTED_EDGE('',*,*,#362169,.T.); +#362191 = ORIENTED_EDGE('',*,*,#362192,.T.); +#362192 = EDGE_CURVE('',#362162,#362193,#362195,.T.); +#362193 = VERTEX_POINT('',#362194); +#362194 = CARTESIAN_POINT('',(125.75,-122.685,-4.E-02)); +#362195 = CIRCLE('',#362196,0.135001418495); +#362196 = AXIS2_PLACEMENT_3D('',#362197,#362198,#362199); +#362197 = CARTESIAN_POINT('',(125.88500141848,-122.6849985815,-4.E-02)); +#362198 = DIRECTION('',(0.,0.,-1.)); +#362199 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362200 = ORIENTED_EDGE('',*,*,#362201,.F.); +#362201 = EDGE_CURVE('',#362202,#362193,#362204,.T.); +#362202 = VERTEX_POINT('',#362203); +#362203 = CARTESIAN_POINT('',(125.75,-122.685,0.)); +#362204 = LINE('',#362205,#362206); +#362205 = CARTESIAN_POINT('',(125.75,-122.685,0.)); +#362206 = VECTOR('',#362207,1.); +#362207 = DIRECTION('',(0.,0.,-1.)); +#362208 = ORIENTED_EDGE('',*,*,#362209,.F.); +#362209 = EDGE_CURVE('',#362170,#362202,#362210,.T.); +#362210 = CIRCLE('',#362211,0.135001418495); +#362211 = AXIS2_PLACEMENT_3D('',#362212,#362213,#362214); +#362212 = CARTESIAN_POINT('',(125.88500141848,-122.6849985815,0.)); +#362213 = DIRECTION('',(0.,0.,-1.)); +#362214 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362215 = CYLINDRICAL_SURFACE('',#362216,0.135001418495); +#362216 = AXIS2_PLACEMENT_3D('',#362217,#362218,#362219); +#362217 = CARTESIAN_POINT('',(125.88500141848,-122.6849985815,0.)); +#362218 = DIRECTION('',(-0.,-0.,1.)); +#362219 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362220 = ADVANCED_FACE('',(#362221),#362237,.F.); +#362221 = FACE_BOUND('',#362222,.F.); +#362222 = EDGE_LOOP('',(#362223,#362224,#362230,#362231)); +#362223 = ORIENTED_EDGE('',*,*,#362201,.T.); +#362224 = ORIENTED_EDGE('',*,*,#362225,.T.); +#362225 = EDGE_CURVE('',#362193,#361993,#362226,.T.); +#362226 = LINE('',#362227,#362228); +#362227 = CARTESIAN_POINT('',(125.75,-122.685,-4.E-02)); +#362228 = VECTOR('',#362229,1.); +#362229 = DIRECTION('',(0.,1.,0.)); +#362230 = ORIENTED_EDGE('',*,*,#361990,.F.); +#362231 = ORIENTED_EDGE('',*,*,#362232,.F.); +#362232 = EDGE_CURVE('',#362202,#361991,#362233,.T.); +#362233 = LINE('',#362234,#362235); +#362234 = CARTESIAN_POINT('',(125.75,-122.685,0.)); +#362235 = VECTOR('',#362236,1.); +#362236 = DIRECTION('',(0.,1.,0.)); +#362237 = PLANE('',#362238); +#362238 = AXIS2_PLACEMENT_3D('',#362239,#362240,#362241); +#362239 = CARTESIAN_POINT('',(125.75,-122.685,0.)); +#362240 = DIRECTION('',(1.,-0.,0.)); +#362241 = DIRECTION('',(0.,1.,0.)); +#362242 = ADVANCED_FACE('',(#362243),#362253,.F.); +#362243 = FACE_BOUND('',#362244,.F.); +#362244 = EDGE_LOOP('',(#362245,#362246,#362247,#362248,#362249,#362250, + #362251,#362252)); +#362245 = ORIENTED_EDGE('',*,*,#362017,.T.); +#362246 = ORIENTED_EDGE('',*,*,#362049,.T.); +#362247 = ORIENTED_EDGE('',*,*,#362081,.T.); +#362248 = ORIENTED_EDGE('',*,*,#362113,.T.); +#362249 = ORIENTED_EDGE('',*,*,#362145,.T.); +#362250 = ORIENTED_EDGE('',*,*,#362177,.T.); +#362251 = ORIENTED_EDGE('',*,*,#362209,.T.); +#362252 = ORIENTED_EDGE('',*,*,#362232,.T.); +#362253 = PLANE('',#362254); +#362254 = AXIS2_PLACEMENT_3D('',#362255,#362256,#362257); +#362255 = CARTESIAN_POINT('',(0.,0.,0.)); +#362256 = DIRECTION('',(-0.,-0.,-1.)); +#362257 = DIRECTION('',(-1.,0.,0.)); +#362258 = ADVANCED_FACE('',(#362259),#362269,.T.); +#362259 = FACE_BOUND('',#362260,.T.); +#362260 = EDGE_LOOP('',(#362261,#362262,#362263,#362264,#362265,#362266, + #362267,#362268)); +#362261 = ORIENTED_EDGE('',*,*,#362000,.T.); +#362262 = ORIENTED_EDGE('',*,*,#362033,.T.); +#362263 = ORIENTED_EDGE('',*,*,#362064,.T.); +#362264 = ORIENTED_EDGE('',*,*,#362097,.T.); +#362265 = ORIENTED_EDGE('',*,*,#362128,.T.); +#362266 = ORIENTED_EDGE('',*,*,#362161,.T.); +#362267 = ORIENTED_EDGE('',*,*,#362192,.T.); +#362268 = ORIENTED_EDGE('',*,*,#362225,.T.); +#362269 = PLANE('',#362270); +#362270 = AXIS2_PLACEMENT_3D('',#362271,#362272,#362273); +#362271 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#362272 = DIRECTION('',(-0.,-0.,-1.)); +#362273 = DIRECTION('',(-1.,0.,0.)); +#362274 = MANIFOLD_SOLID_BREP('',#362275); +#362275 = CLOSED_SHELL('',(#362276,#362318,#362349,#362382,#362413, + #362446,#362477,#362510,#362532,#362548)); +#362276 = ADVANCED_FACE('',(#362277),#362313,.T.); +#362277 = FACE_BOUND('',#362278,.F.); +#362278 = EDGE_LOOP('',(#362279,#362289,#362298,#362306)); +#362279 = ORIENTED_EDGE('',*,*,#362280,.T.); +#362280 = EDGE_CURVE('',#362281,#362283,#362285,.T.); +#362281 = VERTEX_POINT('',#362282); +#362282 = CARTESIAN_POINT('',(146.225,-130.325,0.)); +#362283 = VERTEX_POINT('',#362284); +#362284 = CARTESIAN_POINT('',(146.225,-130.325,-4.E-02)); +#362285 = LINE('',#362286,#362287); +#362286 = CARTESIAN_POINT('',(146.225,-130.325,0.)); +#362287 = VECTOR('',#362288,1.); +#362288 = DIRECTION('',(0.,0.,-1.)); +#362289 = ORIENTED_EDGE('',*,*,#362290,.T.); +#362290 = EDGE_CURVE('',#362283,#362291,#362293,.T.); +#362291 = VERTEX_POINT('',#362292); +#362292 = CARTESIAN_POINT('',(146.3375,-130.2125,-4.E-02)); +#362293 = CIRCLE('',#362294,0.112498336922); +#362294 = AXIS2_PLACEMENT_3D('',#362295,#362296,#362297); +#362295 = CARTESIAN_POINT('',(146.33749833691,-130.3249983369,-4.E-02)); +#362296 = DIRECTION('',(0.,0.,-1.)); +#362297 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#362298 = ORIENTED_EDGE('',*,*,#362299,.F.); +#362299 = EDGE_CURVE('',#362300,#362291,#362302,.T.); +#362300 = VERTEX_POINT('',#362301); +#362301 = CARTESIAN_POINT('',(146.3375,-130.2125,0.)); +#362302 = LINE('',#362303,#362304); +#362303 = CARTESIAN_POINT('',(146.3375,-130.2125,0.)); +#362304 = VECTOR('',#362305,1.); +#362305 = DIRECTION('',(0.,0.,-1.)); +#362306 = ORIENTED_EDGE('',*,*,#362307,.F.); +#362307 = EDGE_CURVE('',#362281,#362300,#362308,.T.); +#362308 = CIRCLE('',#362309,0.112498336922); +#362309 = AXIS2_PLACEMENT_3D('',#362310,#362311,#362312); +#362310 = CARTESIAN_POINT('',(146.33749833691,-130.3249983369,0.)); +#362311 = DIRECTION('',(0.,0.,-1.)); +#362312 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#362313 = CYLINDRICAL_SURFACE('',#362314,0.112498336922); +#362314 = AXIS2_PLACEMENT_3D('',#362315,#362316,#362317); +#362315 = CARTESIAN_POINT('',(146.33749833691,-130.3249983369,0.)); +#362316 = DIRECTION('',(-0.,-0.,1.)); +#362317 = DIRECTION('',(-0.999999999891,-1.478324167686E-05,-0.)); +#362318 = ADVANCED_FACE('',(#362319),#362344,.F.); +#362319 = FACE_BOUND('',#362320,.F.); +#362320 = EDGE_LOOP('',(#362321,#362322,#362330,#362338)); +#362321 = ORIENTED_EDGE('',*,*,#362299,.T.); +#362322 = ORIENTED_EDGE('',*,*,#362323,.T.); +#362323 = EDGE_CURVE('',#362291,#362324,#362326,.T.); +#362324 = VERTEX_POINT('',#362325); +#362325 = CARTESIAN_POINT('',(146.5625,-130.2125,-4.E-02)); +#362326 = LINE('',#362327,#362328); +#362327 = CARTESIAN_POINT('',(146.3375,-130.2125,-4.E-02)); +#362328 = VECTOR('',#362329,1.); +#362329 = DIRECTION('',(1.,0.,0.)); +#362330 = ORIENTED_EDGE('',*,*,#362331,.F.); +#362331 = EDGE_CURVE('',#362332,#362324,#362334,.T.); +#362332 = VERTEX_POINT('',#362333); +#362333 = CARTESIAN_POINT('',(146.5625,-130.2125,0.)); +#362334 = LINE('',#362335,#362336); +#362335 = CARTESIAN_POINT('',(146.5625,-130.2125,0.)); +#362336 = VECTOR('',#362337,1.); +#362337 = DIRECTION('',(0.,0.,-1.)); +#362338 = ORIENTED_EDGE('',*,*,#362339,.F.); +#362339 = EDGE_CURVE('',#362300,#362332,#362340,.T.); +#362340 = LINE('',#362341,#362342); +#362341 = CARTESIAN_POINT('',(146.3375,-130.2125,0.)); +#362342 = VECTOR('',#362343,1.); +#362343 = DIRECTION('',(1.,0.,0.)); +#362344 = PLANE('',#362345); +#362345 = AXIS2_PLACEMENT_3D('',#362346,#362347,#362348); +#362346 = CARTESIAN_POINT('',(146.3375,-130.2125,0.)); +#362347 = DIRECTION('',(0.,-1.,0.)); +#362348 = DIRECTION('',(1.,0.,0.)); +#362349 = ADVANCED_FACE('',(#362350),#362377,.T.); +#362350 = FACE_BOUND('',#362351,.F.); +#362351 = EDGE_LOOP('',(#362352,#362353,#362362,#362370)); +#362352 = ORIENTED_EDGE('',*,*,#362331,.T.); +#362353 = ORIENTED_EDGE('',*,*,#362354,.T.); +#362354 = EDGE_CURVE('',#362324,#362355,#362357,.T.); +#362355 = VERTEX_POINT('',#362356); +#362356 = CARTESIAN_POINT('',(146.675,-130.325,-4.E-02)); +#362357 = CIRCLE('',#362358,0.112498336922); +#362358 = AXIS2_PLACEMENT_3D('',#362359,#362360,#362361); +#362359 = CARTESIAN_POINT('',(146.56250166309,-130.3249983369,-4.E-02)); +#362360 = DIRECTION('',(0.,0.,-1.)); +#362361 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#362362 = ORIENTED_EDGE('',*,*,#362363,.F.); +#362363 = EDGE_CURVE('',#362364,#362355,#362366,.T.); +#362364 = VERTEX_POINT('',#362365); +#362365 = CARTESIAN_POINT('',(146.675,-130.325,0.)); +#362366 = LINE('',#362367,#362368); +#362367 = CARTESIAN_POINT('',(146.675,-130.325,0.)); +#362368 = VECTOR('',#362369,1.); +#362369 = DIRECTION('',(0.,0.,-1.)); +#362370 = ORIENTED_EDGE('',*,*,#362371,.F.); +#362371 = EDGE_CURVE('',#362332,#362364,#362372,.T.); +#362372 = CIRCLE('',#362373,0.112498336922); +#362373 = AXIS2_PLACEMENT_3D('',#362374,#362375,#362376); +#362374 = CARTESIAN_POINT('',(146.56250166309,-130.3249983369,0.)); +#362375 = DIRECTION('',(0.,0.,-1.)); +#362376 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#362377 = CYLINDRICAL_SURFACE('',#362378,0.112498336922); +#362378 = AXIS2_PLACEMENT_3D('',#362379,#362380,#362381); +#362379 = CARTESIAN_POINT('',(146.56250166309,-130.3249983369,0.)); +#362380 = DIRECTION('',(-0.,-0.,1.)); +#362381 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#362382 = ADVANCED_FACE('',(#362383),#362408,.F.); +#362383 = FACE_BOUND('',#362384,.F.); +#362384 = EDGE_LOOP('',(#362385,#362386,#362394,#362402)); +#362385 = ORIENTED_EDGE('',*,*,#362363,.T.); +#362386 = ORIENTED_EDGE('',*,*,#362387,.T.); +#362387 = EDGE_CURVE('',#362355,#362388,#362390,.T.); +#362388 = VERTEX_POINT('',#362389); +#362389 = CARTESIAN_POINT('',(146.675,-131.025,-4.E-02)); +#362390 = LINE('',#362391,#362392); +#362391 = CARTESIAN_POINT('',(146.675,-130.325,-4.E-02)); +#362392 = VECTOR('',#362393,1.); +#362393 = DIRECTION('',(0.,-1.,0.)); +#362394 = ORIENTED_EDGE('',*,*,#362395,.F.); +#362395 = EDGE_CURVE('',#362396,#362388,#362398,.T.); +#362396 = VERTEX_POINT('',#362397); +#362397 = CARTESIAN_POINT('',(146.675,-131.025,0.)); +#362398 = LINE('',#362399,#362400); +#362399 = CARTESIAN_POINT('',(146.675,-131.025,0.)); +#362400 = VECTOR('',#362401,1.); +#362401 = DIRECTION('',(0.,0.,-1.)); +#362402 = ORIENTED_EDGE('',*,*,#362403,.F.); +#362403 = EDGE_CURVE('',#362364,#362396,#362404,.T.); +#362404 = LINE('',#362405,#362406); +#362405 = CARTESIAN_POINT('',(146.675,-130.325,0.)); +#362406 = VECTOR('',#362407,1.); +#362407 = DIRECTION('',(0.,-1.,0.)); +#362408 = PLANE('',#362409); +#362409 = AXIS2_PLACEMENT_3D('',#362410,#362411,#362412); +#362410 = CARTESIAN_POINT('',(146.675,-130.325,0.)); +#362411 = DIRECTION('',(-1.,-0.,-0.)); +#362412 = DIRECTION('',(0.,-1.,0.)); +#362413 = ADVANCED_FACE('',(#362414),#362441,.T.); +#362414 = FACE_BOUND('',#362415,.F.); +#362415 = EDGE_LOOP('',(#362416,#362417,#362426,#362434)); +#362416 = ORIENTED_EDGE('',*,*,#362395,.T.); +#362417 = ORIENTED_EDGE('',*,*,#362418,.T.); +#362418 = EDGE_CURVE('',#362388,#362419,#362421,.T.); +#362419 = VERTEX_POINT('',#362420); +#362420 = CARTESIAN_POINT('',(146.5625,-131.1375,-4.E-02)); +#362421 = CIRCLE('',#362422,0.112498336922); +#362422 = AXIS2_PLACEMENT_3D('',#362423,#362424,#362425); +#362423 = CARTESIAN_POINT('',(146.56250166309,-131.025001663,-4.E-02)); +#362424 = DIRECTION('',(0.,0.,-1.)); +#362425 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#362426 = ORIENTED_EDGE('',*,*,#362427,.F.); +#362427 = EDGE_CURVE('',#362428,#362419,#362430,.T.); +#362428 = VERTEX_POINT('',#362429); +#362429 = CARTESIAN_POINT('',(146.5625,-131.1375,0.)); +#362430 = LINE('',#362431,#362432); +#362431 = CARTESIAN_POINT('',(146.5625,-131.1375,0.)); +#362432 = VECTOR('',#362433,1.); +#362433 = DIRECTION('',(0.,0.,-1.)); +#362434 = ORIENTED_EDGE('',*,*,#362435,.F.); +#362435 = EDGE_CURVE('',#362396,#362428,#362436,.T.); +#362436 = CIRCLE('',#362437,0.112498336922); +#362437 = AXIS2_PLACEMENT_3D('',#362438,#362439,#362440); +#362438 = CARTESIAN_POINT('',(146.56250166309,-131.025001663,0.)); +#362439 = DIRECTION('',(0.,0.,-1.)); +#362440 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#362441 = CYLINDRICAL_SURFACE('',#362442,0.112498336922); +#362442 = AXIS2_PLACEMENT_3D('',#362443,#362444,#362445); +#362443 = CARTESIAN_POINT('',(146.56250166309,-131.025001663,0.)); +#362444 = DIRECTION('',(-0.,-0.,1.)); +#362445 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#362446 = ADVANCED_FACE('',(#362447),#362472,.F.); +#362447 = FACE_BOUND('',#362448,.F.); +#362448 = EDGE_LOOP('',(#362449,#362450,#362458,#362466)); +#362449 = ORIENTED_EDGE('',*,*,#362427,.T.); +#362450 = ORIENTED_EDGE('',*,*,#362451,.T.); +#362451 = EDGE_CURVE('',#362419,#362452,#362454,.T.); +#362452 = VERTEX_POINT('',#362453); +#362453 = CARTESIAN_POINT('',(146.3375,-131.1375,-4.E-02)); +#362454 = LINE('',#362455,#362456); +#362455 = CARTESIAN_POINT('',(146.5625,-131.1375,-4.E-02)); +#362456 = VECTOR('',#362457,1.); +#362457 = DIRECTION('',(-1.,0.,0.)); +#362458 = ORIENTED_EDGE('',*,*,#362459,.F.); +#362459 = EDGE_CURVE('',#362460,#362452,#362462,.T.); +#362460 = VERTEX_POINT('',#362461); +#362461 = CARTESIAN_POINT('',(146.3375,-131.1375,0.)); +#362462 = LINE('',#362463,#362464); +#362463 = CARTESIAN_POINT('',(146.3375,-131.1375,0.)); +#362464 = VECTOR('',#362465,1.); +#362465 = DIRECTION('',(0.,0.,-1.)); +#362466 = ORIENTED_EDGE('',*,*,#362467,.F.); +#362467 = EDGE_CURVE('',#362428,#362460,#362468,.T.); +#362468 = LINE('',#362469,#362470); +#362469 = CARTESIAN_POINT('',(146.5625,-131.1375,0.)); +#362470 = VECTOR('',#362471,1.); +#362471 = DIRECTION('',(-1.,0.,0.)); +#362472 = PLANE('',#362473); +#362473 = AXIS2_PLACEMENT_3D('',#362474,#362475,#362476); +#362474 = CARTESIAN_POINT('',(146.5625,-131.1375,0.)); +#362475 = DIRECTION('',(0.,1.,0.)); +#362476 = DIRECTION('',(-1.,0.,0.)); +#362477 = ADVANCED_FACE('',(#362478),#362505,.T.); +#362478 = FACE_BOUND('',#362479,.F.); +#362479 = EDGE_LOOP('',(#362480,#362481,#362490,#362498)); +#362480 = ORIENTED_EDGE('',*,*,#362459,.T.); +#362481 = ORIENTED_EDGE('',*,*,#362482,.T.); +#362482 = EDGE_CURVE('',#362452,#362483,#362485,.T.); +#362483 = VERTEX_POINT('',#362484); +#362484 = CARTESIAN_POINT('',(146.225,-131.025,-4.E-02)); +#362485 = CIRCLE('',#362486,0.112498336922); +#362486 = AXIS2_PLACEMENT_3D('',#362487,#362488,#362489); +#362487 = CARTESIAN_POINT('',(146.33749833691,-131.025001663,-4.E-02)); +#362488 = DIRECTION('',(0.,0.,-1.)); +#362489 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#362490 = ORIENTED_EDGE('',*,*,#362491,.F.); +#362491 = EDGE_CURVE('',#362492,#362483,#362494,.T.); +#362492 = VERTEX_POINT('',#362493); +#362493 = CARTESIAN_POINT('',(146.225,-131.025,0.)); +#362494 = LINE('',#362495,#362496); +#362495 = CARTESIAN_POINT('',(146.225,-131.025,0.)); +#362496 = VECTOR('',#362497,1.); +#362497 = DIRECTION('',(0.,0.,-1.)); +#362498 = ORIENTED_EDGE('',*,*,#362499,.F.); +#362499 = EDGE_CURVE('',#362460,#362492,#362500,.T.); +#362500 = CIRCLE('',#362501,0.112498336922); +#362501 = AXIS2_PLACEMENT_3D('',#362502,#362503,#362504); +#362502 = CARTESIAN_POINT('',(146.33749833691,-131.025001663,0.)); +#362503 = DIRECTION('',(0.,0.,-1.)); +#362504 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#362505 = CYLINDRICAL_SURFACE('',#362506,0.112498336922); +#362506 = AXIS2_PLACEMENT_3D('',#362507,#362508,#362509); +#362507 = CARTESIAN_POINT('',(146.33749833691,-131.025001663,0.)); +#362508 = DIRECTION('',(-0.,-0.,1.)); +#362509 = DIRECTION('',(1.47832419295E-05,-0.999999999891,0.)); +#362510 = ADVANCED_FACE('',(#362511),#362527,.F.); +#362511 = FACE_BOUND('',#362512,.F.); +#362512 = EDGE_LOOP('',(#362513,#362514,#362520,#362521)); +#362513 = ORIENTED_EDGE('',*,*,#362491,.T.); +#362514 = ORIENTED_EDGE('',*,*,#362515,.T.); +#362515 = EDGE_CURVE('',#362483,#362283,#362516,.T.); +#362516 = LINE('',#362517,#362518); +#362517 = CARTESIAN_POINT('',(146.225,-131.025,-4.E-02)); +#362518 = VECTOR('',#362519,1.); +#362519 = DIRECTION('',(0.,1.,0.)); +#362520 = ORIENTED_EDGE('',*,*,#362280,.F.); +#362521 = ORIENTED_EDGE('',*,*,#362522,.F.); +#362522 = EDGE_CURVE('',#362492,#362281,#362523,.T.); +#362523 = LINE('',#362524,#362525); +#362524 = CARTESIAN_POINT('',(146.225,-131.025,0.)); +#362525 = VECTOR('',#362526,1.); +#362526 = DIRECTION('',(0.,1.,0.)); +#362527 = PLANE('',#362528); +#362528 = AXIS2_PLACEMENT_3D('',#362529,#362530,#362531); +#362529 = CARTESIAN_POINT('',(146.225,-131.025,0.)); +#362530 = DIRECTION('',(1.,-0.,0.)); +#362531 = DIRECTION('',(0.,1.,0.)); +#362532 = ADVANCED_FACE('',(#362533),#362543,.F.); +#362533 = FACE_BOUND('',#362534,.F.); +#362534 = EDGE_LOOP('',(#362535,#362536,#362537,#362538,#362539,#362540, + #362541,#362542)); +#362535 = ORIENTED_EDGE('',*,*,#362307,.T.); +#362536 = ORIENTED_EDGE('',*,*,#362339,.T.); +#362537 = ORIENTED_EDGE('',*,*,#362371,.T.); +#362538 = ORIENTED_EDGE('',*,*,#362403,.T.); +#362539 = ORIENTED_EDGE('',*,*,#362435,.T.); +#362540 = ORIENTED_EDGE('',*,*,#362467,.T.); +#362541 = ORIENTED_EDGE('',*,*,#362499,.T.); +#362542 = ORIENTED_EDGE('',*,*,#362522,.T.); +#362543 = PLANE('',#362544); +#362544 = AXIS2_PLACEMENT_3D('',#362545,#362546,#362547); +#362545 = CARTESIAN_POINT('',(0.,0.,0.)); +#362546 = DIRECTION('',(-0.,-0.,-1.)); +#362547 = DIRECTION('',(-1.,0.,0.)); +#362548 = ADVANCED_FACE('',(#362549),#362559,.T.); +#362549 = FACE_BOUND('',#362550,.T.); +#362550 = EDGE_LOOP('',(#362551,#362552,#362553,#362554,#362555,#362556, + #362557,#362558)); +#362551 = ORIENTED_EDGE('',*,*,#362290,.T.); +#362552 = ORIENTED_EDGE('',*,*,#362323,.T.); +#362553 = ORIENTED_EDGE('',*,*,#362354,.T.); +#362554 = ORIENTED_EDGE('',*,*,#362387,.T.); +#362555 = ORIENTED_EDGE('',*,*,#362418,.T.); +#362556 = ORIENTED_EDGE('',*,*,#362451,.T.); +#362557 = ORIENTED_EDGE('',*,*,#362482,.T.); +#362558 = ORIENTED_EDGE('',*,*,#362515,.T.); +#362559 = PLANE('',#362560); +#362560 = AXIS2_PLACEMENT_3D('',#362561,#362562,#362563); +#362561 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#362562 = DIRECTION('',(-0.,-0.,-1.)); +#362563 = DIRECTION('',(-1.,0.,0.)); +#362564 = MANIFOLD_SOLID_BREP('',#362565); +#362565 = CLOSED_SHELL('',(#362566,#362608,#362639,#362672,#362703, + #362736,#362767,#362800,#362822,#362838)); +#362566 = ADVANCED_FACE('',(#362567),#362603,.T.); +#362567 = FACE_BOUND('',#362568,.F.); +#362568 = EDGE_LOOP('',(#362569,#362579,#362588,#362596)); +#362569 = ORIENTED_EDGE('',*,*,#362570,.T.); +#362570 = EDGE_CURVE('',#362571,#362573,#362575,.T.); +#362571 = VERTEX_POINT('',#362572); +#362572 = CARTESIAN_POINT('',(146.38,-128.715,0.)); +#362573 = VERTEX_POINT('',#362574); +#362574 = CARTESIAN_POINT('',(146.38,-128.715,-4.E-02)); +#362575 = LINE('',#362576,#362577); +#362576 = CARTESIAN_POINT('',(146.38,-128.715,0.)); +#362577 = VECTOR('',#362578,1.); +#362578 = DIRECTION('',(0.,0.,-1.)); +#362579 = ORIENTED_EDGE('',*,*,#362580,.T.); +#362580 = EDGE_CURVE('',#362573,#362581,#362583,.T.); +#362581 = VERTEX_POINT('',#362582); +#362582 = CARTESIAN_POINT('',(146.515,-128.58,-4.E-02)); +#362583 = CIRCLE('',#362584,0.135001418495); +#362584 = AXIS2_PLACEMENT_3D('',#362585,#362586,#362587); +#362585 = CARTESIAN_POINT('',(146.51500141848,-128.7150014184,-4.E-02)); +#362586 = DIRECTION('',(0.,0.,-1.)); +#362587 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362588 = ORIENTED_EDGE('',*,*,#362589,.F.); +#362589 = EDGE_CURVE('',#362590,#362581,#362592,.T.); +#362590 = VERTEX_POINT('',#362591); +#362591 = CARTESIAN_POINT('',(146.515,-128.58,0.)); +#362592 = LINE('',#362593,#362594); +#362593 = CARTESIAN_POINT('',(146.515,-128.58,0.)); +#362594 = VECTOR('',#362595,1.); +#362595 = DIRECTION('',(0.,0.,-1.)); +#362596 = ORIENTED_EDGE('',*,*,#362597,.F.); +#362597 = EDGE_CURVE('',#362571,#362590,#362598,.T.); +#362598 = CIRCLE('',#362599,0.135001418495); +#362599 = AXIS2_PLACEMENT_3D('',#362600,#362601,#362602); +#362600 = CARTESIAN_POINT('',(146.51500141848,-128.7150014184,0.)); +#362601 = DIRECTION('',(0.,0.,-1.)); +#362602 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362603 = CYLINDRICAL_SURFACE('',#362604,0.135001418495); +#362604 = AXIS2_PLACEMENT_3D('',#362605,#362606,#362607); +#362605 = CARTESIAN_POINT('',(146.51500141848,-128.7150014184,0.)); +#362606 = DIRECTION('',(-0.,-0.,1.)); +#362607 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#362608 = ADVANCED_FACE('',(#362609),#362634,.F.); +#362609 = FACE_BOUND('',#362610,.F.); +#362610 = EDGE_LOOP('',(#362611,#362612,#362620,#362628)); +#362611 = ORIENTED_EDGE('',*,*,#362589,.T.); +#362612 = ORIENTED_EDGE('',*,*,#362613,.T.); +#362613 = EDGE_CURVE('',#362581,#362614,#362616,.T.); +#362614 = VERTEX_POINT('',#362615); +#362615 = CARTESIAN_POINT('',(146.785,-128.58,-4.E-02)); +#362616 = LINE('',#362617,#362618); +#362617 = CARTESIAN_POINT('',(146.515,-128.58,-4.E-02)); +#362618 = VECTOR('',#362619,1.); +#362619 = DIRECTION('',(1.,0.,0.)); +#362620 = ORIENTED_EDGE('',*,*,#362621,.F.); +#362621 = EDGE_CURVE('',#362622,#362614,#362624,.T.); +#362622 = VERTEX_POINT('',#362623); +#362623 = CARTESIAN_POINT('',(146.785,-128.58,0.)); +#362624 = LINE('',#362625,#362626); +#362625 = CARTESIAN_POINT('',(146.785,-128.58,0.)); +#362626 = VECTOR('',#362627,1.); +#362627 = DIRECTION('',(0.,0.,-1.)); +#362628 = ORIENTED_EDGE('',*,*,#362629,.F.); +#362629 = EDGE_CURVE('',#362590,#362622,#362630,.T.); +#362630 = LINE('',#362631,#362632); +#362631 = CARTESIAN_POINT('',(146.515,-128.58,0.)); +#362632 = VECTOR('',#362633,1.); +#362633 = DIRECTION('',(1.,0.,0.)); +#362634 = PLANE('',#362635); +#362635 = AXIS2_PLACEMENT_3D('',#362636,#362637,#362638); +#362636 = CARTESIAN_POINT('',(146.515,-128.58,0.)); +#362637 = DIRECTION('',(0.,-1.,0.)); +#362638 = DIRECTION('',(1.,0.,0.)); +#362639 = ADVANCED_FACE('',(#362640),#362667,.T.); +#362640 = FACE_BOUND('',#362641,.F.); +#362641 = EDGE_LOOP('',(#362642,#362643,#362652,#362660)); +#362642 = ORIENTED_EDGE('',*,*,#362621,.T.); +#362643 = ORIENTED_EDGE('',*,*,#362644,.T.); +#362644 = EDGE_CURVE('',#362614,#362645,#362647,.T.); +#362645 = VERTEX_POINT('',#362646); +#362646 = CARTESIAN_POINT('',(146.92,-128.715,-4.E-02)); +#362647 = CIRCLE('',#362648,0.135001418495); +#362648 = AXIS2_PLACEMENT_3D('',#362649,#362650,#362651); +#362649 = CARTESIAN_POINT('',(146.78499858151,-128.7150014184,-4.E-02)); +#362650 = DIRECTION('',(0.,0.,-1.)); +#362651 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#362652 = ORIENTED_EDGE('',*,*,#362653,.F.); +#362653 = EDGE_CURVE('',#362654,#362645,#362656,.T.); +#362654 = VERTEX_POINT('',#362655); +#362655 = CARTESIAN_POINT('',(146.92,-128.715,0.)); +#362656 = LINE('',#362657,#362658); +#362657 = CARTESIAN_POINT('',(146.92,-128.715,0.)); +#362658 = VECTOR('',#362659,1.); +#362659 = DIRECTION('',(0.,0.,-1.)); +#362660 = ORIENTED_EDGE('',*,*,#362661,.F.); +#362661 = EDGE_CURVE('',#362622,#362654,#362662,.T.); +#362662 = CIRCLE('',#362663,0.135001418495); +#362663 = AXIS2_PLACEMENT_3D('',#362664,#362665,#362666); +#362664 = CARTESIAN_POINT('',(146.78499858151,-128.7150014184,0.)); +#362665 = DIRECTION('',(0.,0.,-1.)); +#362666 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#362667 = CYLINDRICAL_SURFACE('',#362668,0.135001418495); +#362668 = AXIS2_PLACEMENT_3D('',#362669,#362670,#362671); +#362669 = CARTESIAN_POINT('',(146.78499858151,-128.7150014184,0.)); +#362670 = DIRECTION('',(-0.,-0.,1.)); +#362671 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#362672 = ADVANCED_FACE('',(#362673),#362698,.F.); +#362673 = FACE_BOUND('',#362674,.F.); +#362674 = EDGE_LOOP('',(#362675,#362676,#362684,#362692)); +#362675 = ORIENTED_EDGE('',*,*,#362653,.T.); +#362676 = ORIENTED_EDGE('',*,*,#362677,.T.); +#362677 = EDGE_CURVE('',#362645,#362678,#362680,.T.); +#362678 = VERTEX_POINT('',#362679); +#362679 = CARTESIAN_POINT('',(146.92,-129.085,-4.E-02)); +#362680 = LINE('',#362681,#362682); +#362681 = CARTESIAN_POINT('',(146.92,-128.715,-4.E-02)); +#362682 = VECTOR('',#362683,1.); +#362683 = DIRECTION('',(0.,-1.,0.)); +#362684 = ORIENTED_EDGE('',*,*,#362685,.F.); +#362685 = EDGE_CURVE('',#362686,#362678,#362688,.T.); +#362686 = VERTEX_POINT('',#362687); +#362687 = CARTESIAN_POINT('',(146.92,-129.085,0.)); +#362688 = LINE('',#362689,#362690); +#362689 = CARTESIAN_POINT('',(146.92,-129.085,0.)); +#362690 = VECTOR('',#362691,1.); +#362691 = DIRECTION('',(0.,0.,-1.)); +#362692 = ORIENTED_EDGE('',*,*,#362693,.F.); +#362693 = EDGE_CURVE('',#362654,#362686,#362694,.T.); +#362694 = LINE('',#362695,#362696); +#362695 = CARTESIAN_POINT('',(146.92,-128.715,0.)); +#362696 = VECTOR('',#362697,1.); +#362697 = DIRECTION('',(0.,-1.,0.)); +#362698 = PLANE('',#362699); +#362699 = AXIS2_PLACEMENT_3D('',#362700,#362701,#362702); +#362700 = CARTESIAN_POINT('',(146.92,-128.715,0.)); +#362701 = DIRECTION('',(-1.,-0.,-0.)); +#362702 = DIRECTION('',(0.,-1.,0.)); +#362703 = ADVANCED_FACE('',(#362704),#362731,.T.); +#362704 = FACE_BOUND('',#362705,.F.); +#362705 = EDGE_LOOP('',(#362706,#362707,#362716,#362724)); +#362706 = ORIENTED_EDGE('',*,*,#362685,.T.); +#362707 = ORIENTED_EDGE('',*,*,#362708,.T.); +#362708 = EDGE_CURVE('',#362678,#362709,#362711,.T.); +#362709 = VERTEX_POINT('',#362710); +#362710 = CARTESIAN_POINT('',(146.785,-129.22,-4.E-02)); +#362711 = CIRCLE('',#362712,0.135001418495); +#362712 = AXIS2_PLACEMENT_3D('',#362713,#362714,#362715); +#362713 = CARTESIAN_POINT('',(146.78499858151,-129.0849985815,-4.E-02)); +#362714 = DIRECTION('',(0.,0.,-1.)); +#362715 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#362716 = ORIENTED_EDGE('',*,*,#362717,.F.); +#362717 = EDGE_CURVE('',#362718,#362709,#362720,.T.); +#362718 = VERTEX_POINT('',#362719); +#362719 = CARTESIAN_POINT('',(146.785,-129.22,0.)); +#362720 = LINE('',#362721,#362722); +#362721 = CARTESIAN_POINT('',(146.785,-129.22,0.)); +#362722 = VECTOR('',#362723,1.); +#362723 = DIRECTION('',(0.,0.,-1.)); +#362724 = ORIENTED_EDGE('',*,*,#362725,.F.); +#362725 = EDGE_CURVE('',#362686,#362718,#362726,.T.); +#362726 = CIRCLE('',#362727,0.135001418495); +#362727 = AXIS2_PLACEMENT_3D('',#362728,#362729,#362730); +#362728 = CARTESIAN_POINT('',(146.78499858151,-129.0849985815,0.)); +#362729 = DIRECTION('',(0.,0.,-1.)); +#362730 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#362731 = CYLINDRICAL_SURFACE('',#362732,0.135001418495); +#362732 = AXIS2_PLACEMENT_3D('',#362733,#362734,#362735); +#362733 = CARTESIAN_POINT('',(146.78499858151,-129.0849985815,0.)); +#362734 = DIRECTION('',(-0.,-0.,1.)); +#362735 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#362736 = ADVANCED_FACE('',(#362737),#362762,.F.); +#362737 = FACE_BOUND('',#362738,.F.); +#362738 = EDGE_LOOP('',(#362739,#362740,#362748,#362756)); +#362739 = ORIENTED_EDGE('',*,*,#362717,.T.); +#362740 = ORIENTED_EDGE('',*,*,#362741,.T.); +#362741 = EDGE_CURVE('',#362709,#362742,#362744,.T.); +#362742 = VERTEX_POINT('',#362743); +#362743 = CARTESIAN_POINT('',(146.515,-129.22,-4.E-02)); +#362744 = LINE('',#362745,#362746); +#362745 = CARTESIAN_POINT('',(146.785,-129.22,-4.E-02)); +#362746 = VECTOR('',#362747,1.); +#362747 = DIRECTION('',(-1.,0.,0.)); +#362748 = ORIENTED_EDGE('',*,*,#362749,.F.); +#362749 = EDGE_CURVE('',#362750,#362742,#362752,.T.); +#362750 = VERTEX_POINT('',#362751); +#362751 = CARTESIAN_POINT('',(146.515,-129.22,0.)); +#362752 = LINE('',#362753,#362754); +#362753 = CARTESIAN_POINT('',(146.515,-129.22,0.)); +#362754 = VECTOR('',#362755,1.); +#362755 = DIRECTION('',(0.,0.,-1.)); +#362756 = ORIENTED_EDGE('',*,*,#362757,.F.); +#362757 = EDGE_CURVE('',#362718,#362750,#362758,.T.); +#362758 = LINE('',#362759,#362760); +#362759 = CARTESIAN_POINT('',(146.785,-129.22,0.)); +#362760 = VECTOR('',#362761,1.); +#362761 = DIRECTION('',(-1.,0.,0.)); +#362762 = PLANE('',#362763); +#362763 = AXIS2_PLACEMENT_3D('',#362764,#362765,#362766); +#362764 = CARTESIAN_POINT('',(146.785,-129.22,0.)); +#362765 = DIRECTION('',(0.,1.,0.)); +#362766 = DIRECTION('',(-1.,0.,0.)); +#362767 = ADVANCED_FACE('',(#362768),#362795,.T.); +#362768 = FACE_BOUND('',#362769,.F.); +#362769 = EDGE_LOOP('',(#362770,#362771,#362780,#362788)); +#362770 = ORIENTED_EDGE('',*,*,#362749,.T.); +#362771 = ORIENTED_EDGE('',*,*,#362772,.T.); +#362772 = EDGE_CURVE('',#362742,#362773,#362775,.T.); +#362773 = VERTEX_POINT('',#362774); +#362774 = CARTESIAN_POINT('',(146.38,-129.085,-4.E-02)); +#362775 = CIRCLE('',#362776,0.135001418495); +#362776 = AXIS2_PLACEMENT_3D('',#362777,#362778,#362779); +#362777 = CARTESIAN_POINT('',(146.51500141848,-129.0849985815,-4.E-02)); +#362778 = DIRECTION('',(0.,0.,-1.)); +#362779 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362780 = ORIENTED_EDGE('',*,*,#362781,.F.); +#362781 = EDGE_CURVE('',#362782,#362773,#362784,.T.); +#362782 = VERTEX_POINT('',#362783); +#362783 = CARTESIAN_POINT('',(146.38,-129.085,0.)); +#362784 = LINE('',#362785,#362786); +#362785 = CARTESIAN_POINT('',(146.38,-129.085,0.)); +#362786 = VECTOR('',#362787,1.); +#362787 = DIRECTION('',(0.,0.,-1.)); +#362788 = ORIENTED_EDGE('',*,*,#362789,.F.); +#362789 = EDGE_CURVE('',#362750,#362782,#362790,.T.); +#362790 = CIRCLE('',#362791,0.135001418495); +#362791 = AXIS2_PLACEMENT_3D('',#362792,#362793,#362794); +#362792 = CARTESIAN_POINT('',(146.51500141848,-129.0849985815,0.)); +#362793 = DIRECTION('',(0.,0.,-1.)); +#362794 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362795 = CYLINDRICAL_SURFACE('',#362796,0.135001418495); +#362796 = AXIS2_PLACEMENT_3D('',#362797,#362798,#362799); +#362797 = CARTESIAN_POINT('',(146.51500141848,-129.0849985815,0.)); +#362798 = DIRECTION('',(-0.,-0.,1.)); +#362799 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#362800 = ADVANCED_FACE('',(#362801),#362817,.F.); +#362801 = FACE_BOUND('',#362802,.F.); +#362802 = EDGE_LOOP('',(#362803,#362804,#362810,#362811)); +#362803 = ORIENTED_EDGE('',*,*,#362781,.T.); +#362804 = ORIENTED_EDGE('',*,*,#362805,.T.); +#362805 = EDGE_CURVE('',#362773,#362573,#362806,.T.); +#362806 = LINE('',#362807,#362808); +#362807 = CARTESIAN_POINT('',(146.38,-129.085,-4.E-02)); +#362808 = VECTOR('',#362809,1.); +#362809 = DIRECTION('',(0.,1.,0.)); +#362810 = ORIENTED_EDGE('',*,*,#362570,.F.); +#362811 = ORIENTED_EDGE('',*,*,#362812,.F.); +#362812 = EDGE_CURVE('',#362782,#362571,#362813,.T.); +#362813 = LINE('',#362814,#362815); +#362814 = CARTESIAN_POINT('',(146.38,-129.085,0.)); +#362815 = VECTOR('',#362816,1.); +#362816 = DIRECTION('',(0.,1.,0.)); +#362817 = PLANE('',#362818); +#362818 = AXIS2_PLACEMENT_3D('',#362819,#362820,#362821); +#362819 = CARTESIAN_POINT('',(146.38,-129.085,0.)); +#362820 = DIRECTION('',(1.,-0.,0.)); +#362821 = DIRECTION('',(0.,1.,0.)); +#362822 = ADVANCED_FACE('',(#362823),#362833,.F.); +#362823 = FACE_BOUND('',#362824,.F.); +#362824 = EDGE_LOOP('',(#362825,#362826,#362827,#362828,#362829,#362830, + #362831,#362832)); +#362825 = ORIENTED_EDGE('',*,*,#362597,.T.); +#362826 = ORIENTED_EDGE('',*,*,#362629,.T.); +#362827 = ORIENTED_EDGE('',*,*,#362661,.T.); +#362828 = ORIENTED_EDGE('',*,*,#362693,.T.); +#362829 = ORIENTED_EDGE('',*,*,#362725,.T.); +#362830 = ORIENTED_EDGE('',*,*,#362757,.T.); +#362831 = ORIENTED_EDGE('',*,*,#362789,.T.); +#362832 = ORIENTED_EDGE('',*,*,#362812,.T.); +#362833 = PLANE('',#362834); +#362834 = AXIS2_PLACEMENT_3D('',#362835,#362836,#362837); +#362835 = CARTESIAN_POINT('',(0.,0.,0.)); +#362836 = DIRECTION('',(-0.,-0.,-1.)); +#362837 = DIRECTION('',(-1.,0.,0.)); +#362838 = ADVANCED_FACE('',(#362839),#362849,.T.); +#362839 = FACE_BOUND('',#362840,.T.); +#362840 = EDGE_LOOP('',(#362841,#362842,#362843,#362844,#362845,#362846, + #362847,#362848)); +#362841 = ORIENTED_EDGE('',*,*,#362580,.T.); +#362842 = ORIENTED_EDGE('',*,*,#362613,.T.); +#362843 = ORIENTED_EDGE('',*,*,#362644,.T.); +#362844 = ORIENTED_EDGE('',*,*,#362677,.T.); +#362845 = ORIENTED_EDGE('',*,*,#362708,.T.); +#362846 = ORIENTED_EDGE('',*,*,#362741,.T.); +#362847 = ORIENTED_EDGE('',*,*,#362772,.T.); +#362848 = ORIENTED_EDGE('',*,*,#362805,.T.); +#362849 = PLANE('',#362850); +#362850 = AXIS2_PLACEMENT_3D('',#362851,#362852,#362853); +#362851 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#362852 = DIRECTION('',(-0.,-0.,-1.)); +#362853 = DIRECTION('',(-1.,0.,0.)); +#362854 = MANIFOLD_SOLID_BREP('',#362855); +#362855 = CLOSED_SHELL('',(#362856,#362898,#362929,#362962,#362993, + #363026,#363057,#363090,#363112,#363128)); +#362856 = ADVANCED_FACE('',(#362857),#362893,.T.); +#362857 = FACE_BOUND('',#362858,.F.); +#362858 = EDGE_LOOP('',(#362859,#362869,#362878,#362886)); +#362859 = ORIENTED_EDGE('',*,*,#362860,.T.); +#362860 = EDGE_CURVE('',#362861,#362863,#362865,.T.); +#362861 = VERTEX_POINT('',#362862); +#362862 = CARTESIAN_POINT('',(145.1125,-126.7,0.)); +#362863 = VERTEX_POINT('',#362864); +#362864 = CARTESIAN_POINT('',(145.1125,-126.7,-4.E-02)); +#362865 = LINE('',#362866,#362867); +#362866 = CARTESIAN_POINT('',(145.1125,-126.7,0.)); +#362867 = VECTOR('',#362868,1.); +#362868 = DIRECTION('',(0.,0.,-1.)); +#362869 = ORIENTED_EDGE('',*,*,#362870,.T.); +#362870 = EDGE_CURVE('',#362863,#362871,#362873,.T.); +#362871 = VERTEX_POINT('',#362872); +#362872 = CARTESIAN_POINT('',(145.2625,-126.55,-4.E-02)); +#362873 = CIRCLE('',#362874,0.150000058649); +#362874 = AXIS2_PLACEMENT_3D('',#362875,#362876,#362877); +#362875 = CARTESIAN_POINT('',(145.26250005864,-126.7000000586,-4.E-02)); +#362876 = DIRECTION('',(0.,0.,-1.)); +#362877 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#362878 = ORIENTED_EDGE('',*,*,#362879,.F.); +#362879 = EDGE_CURVE('',#362880,#362871,#362882,.T.); +#362880 = VERTEX_POINT('',#362881); +#362881 = CARTESIAN_POINT('',(145.2625,-126.55,0.)); +#362882 = LINE('',#362883,#362884); +#362883 = CARTESIAN_POINT('',(145.2625,-126.55,0.)); +#362884 = VECTOR('',#362885,1.); +#362885 = DIRECTION('',(0.,0.,-1.)); +#362886 = ORIENTED_EDGE('',*,*,#362887,.F.); +#362887 = EDGE_CURVE('',#362861,#362880,#362888,.T.); +#362888 = CIRCLE('',#362889,0.150000058649); +#362889 = AXIS2_PLACEMENT_3D('',#362890,#362891,#362892); +#362890 = CARTESIAN_POINT('',(145.26250005864,-126.7000000586,0.)); +#362891 = DIRECTION('',(0.,0.,-1.)); +#362892 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#362893 = CYLINDRICAL_SURFACE('',#362894,0.150000058649); +#362894 = AXIS2_PLACEMENT_3D('',#362895,#362896,#362897); +#362895 = CARTESIAN_POINT('',(145.26250005864,-126.7000000586,0.)); +#362896 = DIRECTION('',(-0.,-0.,1.)); +#362897 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#362898 = ADVANCED_FACE('',(#362899),#362924,.F.); +#362899 = FACE_BOUND('',#362900,.F.); +#362900 = EDGE_LOOP('',(#362901,#362902,#362910,#362918)); +#362901 = ORIENTED_EDGE('',*,*,#362879,.T.); +#362902 = ORIENTED_EDGE('',*,*,#362903,.T.); +#362903 = EDGE_CURVE('',#362871,#362904,#362906,.T.); +#362904 = VERTEX_POINT('',#362905); +#362905 = CARTESIAN_POINT('',(146.4375,-126.55,-4.E-02)); +#362906 = LINE('',#362907,#362908); +#362907 = CARTESIAN_POINT('',(145.2625,-126.55,-4.E-02)); +#362908 = VECTOR('',#362909,1.); +#362909 = DIRECTION('',(1.,0.,0.)); +#362910 = ORIENTED_EDGE('',*,*,#362911,.F.); +#362911 = EDGE_CURVE('',#362912,#362904,#362914,.T.); +#362912 = VERTEX_POINT('',#362913); +#362913 = CARTESIAN_POINT('',(146.4375,-126.55,0.)); +#362914 = LINE('',#362915,#362916); +#362915 = CARTESIAN_POINT('',(146.4375,-126.55,0.)); +#362916 = VECTOR('',#362917,1.); +#362917 = DIRECTION('',(0.,0.,-1.)); +#362918 = ORIENTED_EDGE('',*,*,#362919,.F.); +#362919 = EDGE_CURVE('',#362880,#362912,#362920,.T.); +#362920 = LINE('',#362921,#362922); +#362921 = CARTESIAN_POINT('',(145.2625,-126.55,0.)); +#362922 = VECTOR('',#362923,1.); +#362923 = DIRECTION('',(1.,0.,0.)); +#362924 = PLANE('',#362925); +#362925 = AXIS2_PLACEMENT_3D('',#362926,#362927,#362928); +#362926 = CARTESIAN_POINT('',(145.2625,-126.55,0.)); +#362927 = DIRECTION('',(0.,-1.,0.)); +#362928 = DIRECTION('',(1.,0.,0.)); +#362929 = ADVANCED_FACE('',(#362930),#362957,.T.); +#362930 = FACE_BOUND('',#362931,.F.); +#362931 = EDGE_LOOP('',(#362932,#362933,#362942,#362950)); +#362932 = ORIENTED_EDGE('',*,*,#362911,.T.); +#362933 = ORIENTED_EDGE('',*,*,#362934,.T.); +#362934 = EDGE_CURVE('',#362904,#362935,#362937,.T.); +#362935 = VERTEX_POINT('',#362936); +#362936 = CARTESIAN_POINT('',(146.5875,-126.7,-4.E-02)); +#362937 = CIRCLE('',#362938,0.150000058649); +#362938 = AXIS2_PLACEMENT_3D('',#362939,#362940,#362941); +#362939 = CARTESIAN_POINT('',(146.43749994135,-126.7000000586,-4.E-02)); +#362940 = DIRECTION('',(0.,0.,-1.)); +#362941 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#362942 = ORIENTED_EDGE('',*,*,#362943,.F.); +#362943 = EDGE_CURVE('',#362944,#362935,#362946,.T.); +#362944 = VERTEX_POINT('',#362945); +#362945 = CARTESIAN_POINT('',(146.5875,-126.7,0.)); +#362946 = LINE('',#362947,#362948); +#362947 = CARTESIAN_POINT('',(146.5875,-126.7,0.)); +#362948 = VECTOR('',#362949,1.); +#362949 = DIRECTION('',(0.,0.,-1.)); +#362950 = ORIENTED_EDGE('',*,*,#362951,.F.); +#362951 = EDGE_CURVE('',#362912,#362944,#362952,.T.); +#362952 = CIRCLE('',#362953,0.150000058649); +#362953 = AXIS2_PLACEMENT_3D('',#362954,#362955,#362956); +#362954 = CARTESIAN_POINT('',(146.43749994135,-126.7000000586,0.)); +#362955 = DIRECTION('',(0.,0.,-1.)); +#362956 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#362957 = CYLINDRICAL_SURFACE('',#362958,0.150000058649); +#362958 = AXIS2_PLACEMENT_3D('',#362959,#362960,#362961); +#362959 = CARTESIAN_POINT('',(146.43749994135,-126.7000000586,0.)); +#362960 = DIRECTION('',(-0.,-0.,1.)); +#362961 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#362962 = ADVANCED_FACE('',(#362963),#362988,.F.); +#362963 = FACE_BOUND('',#362964,.F.); +#362964 = EDGE_LOOP('',(#362965,#362966,#362974,#362982)); +#362965 = ORIENTED_EDGE('',*,*,#362943,.T.); +#362966 = ORIENTED_EDGE('',*,*,#362967,.T.); +#362967 = EDGE_CURVE('',#362935,#362968,#362970,.T.); +#362968 = VERTEX_POINT('',#362969); +#362969 = CARTESIAN_POINT('',(146.5875,-127.,-4.E-02)); +#362970 = LINE('',#362971,#362972); +#362971 = CARTESIAN_POINT('',(146.5875,-126.7,-4.E-02)); +#362972 = VECTOR('',#362973,1.); +#362973 = DIRECTION('',(0.,-1.,0.)); +#362974 = ORIENTED_EDGE('',*,*,#362975,.F.); +#362975 = EDGE_CURVE('',#362976,#362968,#362978,.T.); +#362976 = VERTEX_POINT('',#362977); +#362977 = CARTESIAN_POINT('',(146.5875,-127.,0.)); +#362978 = LINE('',#362979,#362980); +#362979 = CARTESIAN_POINT('',(146.5875,-127.,0.)); +#362980 = VECTOR('',#362981,1.); +#362981 = DIRECTION('',(0.,0.,-1.)); +#362982 = ORIENTED_EDGE('',*,*,#362983,.F.); +#362983 = EDGE_CURVE('',#362944,#362976,#362984,.T.); +#362984 = LINE('',#362985,#362986); +#362985 = CARTESIAN_POINT('',(146.5875,-126.7,0.)); +#362986 = VECTOR('',#362987,1.); +#362987 = DIRECTION('',(0.,-1.,0.)); +#362988 = PLANE('',#362989); +#362989 = AXIS2_PLACEMENT_3D('',#362990,#362991,#362992); +#362990 = CARTESIAN_POINT('',(146.5875,-126.7,0.)); +#362991 = DIRECTION('',(-1.,-0.,-0.)); +#362992 = DIRECTION('',(0.,-1.,0.)); +#362993 = ADVANCED_FACE('',(#362994),#363021,.T.); +#362994 = FACE_BOUND('',#362995,.F.); +#362995 = EDGE_LOOP('',(#362996,#362997,#363006,#363014)); +#362996 = ORIENTED_EDGE('',*,*,#362975,.T.); +#362997 = ORIENTED_EDGE('',*,*,#362998,.T.); +#362998 = EDGE_CURVE('',#362968,#362999,#363001,.T.); +#362999 = VERTEX_POINT('',#363000); +#363000 = CARTESIAN_POINT('',(146.4375,-127.15,-4.E-02)); +#363001 = CIRCLE('',#363002,0.150000058649); +#363002 = AXIS2_PLACEMENT_3D('',#363003,#363004,#363005); +#363003 = CARTESIAN_POINT('',(146.43749994135,-126.9999999413,-4.E-02)); +#363004 = DIRECTION('',(0.,0.,-1.)); +#363005 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363006 = ORIENTED_EDGE('',*,*,#363007,.F.); +#363007 = EDGE_CURVE('',#363008,#362999,#363010,.T.); +#363008 = VERTEX_POINT('',#363009); +#363009 = CARTESIAN_POINT('',(146.4375,-127.15,0.)); +#363010 = LINE('',#363011,#363012); +#363011 = CARTESIAN_POINT('',(146.4375,-127.15,0.)); +#363012 = VECTOR('',#363013,1.); +#363013 = DIRECTION('',(0.,0.,-1.)); +#363014 = ORIENTED_EDGE('',*,*,#363015,.F.); +#363015 = EDGE_CURVE('',#362976,#363008,#363016,.T.); +#363016 = CIRCLE('',#363017,0.150000058649); +#363017 = AXIS2_PLACEMENT_3D('',#363018,#363019,#363020); +#363018 = CARTESIAN_POINT('',(146.43749994135,-126.9999999413,0.)); +#363019 = DIRECTION('',(0.,0.,-1.)); +#363020 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363021 = CYLINDRICAL_SURFACE('',#363022,0.150000058649); +#363022 = AXIS2_PLACEMENT_3D('',#363023,#363024,#363025); +#363023 = CARTESIAN_POINT('',(146.43749994135,-126.9999999413,0.)); +#363024 = DIRECTION('',(-0.,-0.,1.)); +#363025 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363026 = ADVANCED_FACE('',(#363027),#363052,.F.); +#363027 = FACE_BOUND('',#363028,.F.); +#363028 = EDGE_LOOP('',(#363029,#363030,#363038,#363046)); +#363029 = ORIENTED_EDGE('',*,*,#363007,.T.); +#363030 = ORIENTED_EDGE('',*,*,#363031,.T.); +#363031 = EDGE_CURVE('',#362999,#363032,#363034,.T.); +#363032 = VERTEX_POINT('',#363033); +#363033 = CARTESIAN_POINT('',(145.2625,-127.15,-4.E-02)); +#363034 = LINE('',#363035,#363036); +#363035 = CARTESIAN_POINT('',(146.4375,-127.15,-4.E-02)); +#363036 = VECTOR('',#363037,1.); +#363037 = DIRECTION('',(-1.,0.,0.)); +#363038 = ORIENTED_EDGE('',*,*,#363039,.F.); +#363039 = EDGE_CURVE('',#363040,#363032,#363042,.T.); +#363040 = VERTEX_POINT('',#363041); +#363041 = CARTESIAN_POINT('',(145.2625,-127.15,0.)); +#363042 = LINE('',#363043,#363044); +#363043 = CARTESIAN_POINT('',(145.2625,-127.15,0.)); +#363044 = VECTOR('',#363045,1.); +#363045 = DIRECTION('',(0.,0.,-1.)); +#363046 = ORIENTED_EDGE('',*,*,#363047,.F.); +#363047 = EDGE_CURVE('',#363008,#363040,#363048,.T.); +#363048 = LINE('',#363049,#363050); +#363049 = CARTESIAN_POINT('',(146.4375,-127.15,0.)); +#363050 = VECTOR('',#363051,1.); +#363051 = DIRECTION('',(-1.,0.,0.)); +#363052 = PLANE('',#363053); +#363053 = AXIS2_PLACEMENT_3D('',#363054,#363055,#363056); +#363054 = CARTESIAN_POINT('',(146.4375,-127.15,0.)); +#363055 = DIRECTION('',(0.,1.,0.)); +#363056 = DIRECTION('',(-1.,0.,0.)); +#363057 = ADVANCED_FACE('',(#363058),#363085,.T.); +#363058 = FACE_BOUND('',#363059,.F.); +#363059 = EDGE_LOOP('',(#363060,#363061,#363070,#363078)); +#363060 = ORIENTED_EDGE('',*,*,#363039,.T.); +#363061 = ORIENTED_EDGE('',*,*,#363062,.T.); +#363062 = EDGE_CURVE('',#363032,#363063,#363065,.T.); +#363063 = VERTEX_POINT('',#363064); +#363064 = CARTESIAN_POINT('',(145.1125,-127.,-4.E-02)); +#363065 = CIRCLE('',#363066,0.150000058649); +#363066 = AXIS2_PLACEMENT_3D('',#363067,#363068,#363069); +#363067 = CARTESIAN_POINT('',(145.26250005864,-126.9999999413,-4.E-02)); +#363068 = DIRECTION('',(0.,0.,-1.)); +#363069 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363070 = ORIENTED_EDGE('',*,*,#363071,.F.); +#363071 = EDGE_CURVE('',#363072,#363063,#363074,.T.); +#363072 = VERTEX_POINT('',#363073); +#363073 = CARTESIAN_POINT('',(145.1125,-127.,0.)); +#363074 = LINE('',#363075,#363076); +#363075 = CARTESIAN_POINT('',(145.1125,-127.,0.)); +#363076 = VECTOR('',#363077,1.); +#363077 = DIRECTION('',(0.,0.,-1.)); +#363078 = ORIENTED_EDGE('',*,*,#363079,.F.); +#363079 = EDGE_CURVE('',#363040,#363072,#363080,.T.); +#363080 = CIRCLE('',#363081,0.150000058649); +#363081 = AXIS2_PLACEMENT_3D('',#363082,#363083,#363084); +#363082 = CARTESIAN_POINT('',(145.26250005864,-126.9999999413,0.)); +#363083 = DIRECTION('',(0.,0.,-1.)); +#363084 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363085 = CYLINDRICAL_SURFACE('',#363086,0.150000058649); +#363086 = AXIS2_PLACEMENT_3D('',#363087,#363088,#363089); +#363087 = CARTESIAN_POINT('',(145.26250005864,-126.9999999413,0.)); +#363088 = DIRECTION('',(-0.,-0.,1.)); +#363089 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363090 = ADVANCED_FACE('',(#363091),#363107,.F.); +#363091 = FACE_BOUND('',#363092,.F.); +#363092 = EDGE_LOOP('',(#363093,#363094,#363100,#363101)); +#363093 = ORIENTED_EDGE('',*,*,#363071,.T.); +#363094 = ORIENTED_EDGE('',*,*,#363095,.T.); +#363095 = EDGE_CURVE('',#363063,#362863,#363096,.T.); +#363096 = LINE('',#363097,#363098); +#363097 = CARTESIAN_POINT('',(145.1125,-127.,-4.E-02)); +#363098 = VECTOR('',#363099,1.); +#363099 = DIRECTION('',(0.,1.,0.)); +#363100 = ORIENTED_EDGE('',*,*,#362860,.F.); +#363101 = ORIENTED_EDGE('',*,*,#363102,.F.); +#363102 = EDGE_CURVE('',#363072,#362861,#363103,.T.); +#363103 = LINE('',#363104,#363105); +#363104 = CARTESIAN_POINT('',(145.1125,-127.,0.)); +#363105 = VECTOR('',#363106,1.); +#363106 = DIRECTION('',(0.,1.,0.)); +#363107 = PLANE('',#363108); +#363108 = AXIS2_PLACEMENT_3D('',#363109,#363110,#363111); +#363109 = CARTESIAN_POINT('',(145.1125,-127.,0.)); +#363110 = DIRECTION('',(1.,-0.,0.)); +#363111 = DIRECTION('',(0.,1.,0.)); +#363112 = ADVANCED_FACE('',(#363113),#363123,.F.); +#363113 = FACE_BOUND('',#363114,.F.); +#363114 = EDGE_LOOP('',(#363115,#363116,#363117,#363118,#363119,#363120, + #363121,#363122)); +#363115 = ORIENTED_EDGE('',*,*,#362887,.T.); +#363116 = ORIENTED_EDGE('',*,*,#362919,.T.); +#363117 = ORIENTED_EDGE('',*,*,#362951,.T.); +#363118 = ORIENTED_EDGE('',*,*,#362983,.T.); +#363119 = ORIENTED_EDGE('',*,*,#363015,.T.); +#363120 = ORIENTED_EDGE('',*,*,#363047,.T.); +#363121 = ORIENTED_EDGE('',*,*,#363079,.T.); +#363122 = ORIENTED_EDGE('',*,*,#363102,.T.); +#363123 = PLANE('',#363124); +#363124 = AXIS2_PLACEMENT_3D('',#363125,#363126,#363127); +#363125 = CARTESIAN_POINT('',(0.,0.,0.)); +#363126 = DIRECTION('',(-0.,-0.,-1.)); +#363127 = DIRECTION('',(-1.,0.,0.)); +#363128 = ADVANCED_FACE('',(#363129),#363139,.T.); +#363129 = FACE_BOUND('',#363130,.T.); +#363130 = EDGE_LOOP('',(#363131,#363132,#363133,#363134,#363135,#363136, + #363137,#363138)); +#363131 = ORIENTED_EDGE('',*,*,#362870,.T.); +#363132 = ORIENTED_EDGE('',*,*,#362903,.T.); +#363133 = ORIENTED_EDGE('',*,*,#362934,.T.); +#363134 = ORIENTED_EDGE('',*,*,#362967,.T.); +#363135 = ORIENTED_EDGE('',*,*,#362998,.T.); +#363136 = ORIENTED_EDGE('',*,*,#363031,.T.); +#363137 = ORIENTED_EDGE('',*,*,#363062,.T.); +#363138 = ORIENTED_EDGE('',*,*,#363095,.T.); +#363139 = PLANE('',#363140); +#363140 = AXIS2_PLACEMENT_3D('',#363141,#363142,#363143); +#363141 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#363142 = DIRECTION('',(-0.,-0.,-1.)); +#363143 = DIRECTION('',(-1.,0.,0.)); +#363144 = MANIFOLD_SOLID_BREP('',#363145); +#363145 = CLOSED_SHELL('',(#363146,#363188,#363219,#363252,#363283, + #363316,#363347,#363380,#363402,#363418)); +#363146 = ADVANCED_FACE('',(#363147),#363183,.T.); +#363147 = FACE_BOUND('',#363148,.F.); +#363148 = EDGE_LOOP('',(#363149,#363159,#363168,#363176)); +#363149 = ORIENTED_EDGE('',*,*,#363150,.T.); +#363150 = EDGE_CURVE('',#363151,#363153,#363155,.T.); +#363151 = VERTEX_POINT('',#363152); +#363152 = CARTESIAN_POINT('',(149.65,-128.225,0.)); +#363153 = VERTEX_POINT('',#363154); +#363154 = CARTESIAN_POINT('',(149.65,-128.225,-4.E-02)); +#363155 = LINE('',#363156,#363157); +#363156 = CARTESIAN_POINT('',(149.65,-128.225,0.)); +#363157 = VECTOR('',#363158,1.); +#363158 = DIRECTION('',(0.,0.,-1.)); +#363159 = ORIENTED_EDGE('',*,*,#363160,.T.); +#363160 = EDGE_CURVE('',#363153,#363161,#363163,.T.); +#363161 = VERTEX_POINT('',#363162); +#363162 = CARTESIAN_POINT('',(149.875,-128.,-4.E-02)); +#363163 = CIRCLE('',#363164,0.225000087974); +#363164 = AXIS2_PLACEMENT_3D('',#363165,#363166,#363167); +#363165 = CARTESIAN_POINT('',(149.87500008797,-128.2250000879,-4.E-02)); +#363166 = DIRECTION('',(0.,0.,-1.)); +#363167 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#363168 = ORIENTED_EDGE('',*,*,#363169,.F.); +#363169 = EDGE_CURVE('',#363170,#363161,#363172,.T.); +#363170 = VERTEX_POINT('',#363171); +#363171 = CARTESIAN_POINT('',(149.875,-128.,0.)); +#363172 = LINE('',#363173,#363174); +#363173 = CARTESIAN_POINT('',(149.875,-128.,0.)); +#363174 = VECTOR('',#363175,1.); +#363175 = DIRECTION('',(0.,0.,-1.)); +#363176 = ORIENTED_EDGE('',*,*,#363177,.F.); +#363177 = EDGE_CURVE('',#363151,#363170,#363178,.T.); +#363178 = CIRCLE('',#363179,0.225000087974); +#363179 = AXIS2_PLACEMENT_3D('',#363180,#363181,#363182); +#363180 = CARTESIAN_POINT('',(149.87500008797,-128.2250000879,0.)); +#363181 = DIRECTION('',(0.,0.,-1.)); +#363182 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#363183 = CYLINDRICAL_SURFACE('',#363184,0.225000087974); +#363184 = AXIS2_PLACEMENT_3D('',#363185,#363186,#363187); +#363185 = CARTESIAN_POINT('',(149.87500008797,-128.2250000879,0.)); +#363186 = DIRECTION('',(-0.,-0.,1.)); +#363187 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#363188 = ADVANCED_FACE('',(#363189),#363214,.F.); +#363189 = FACE_BOUND('',#363190,.F.); +#363190 = EDGE_LOOP('',(#363191,#363192,#363200,#363208)); +#363191 = ORIENTED_EDGE('',*,*,#363169,.T.); +#363192 = ORIENTED_EDGE('',*,*,#363193,.T.); +#363193 = EDGE_CURVE('',#363161,#363194,#363196,.T.); +#363194 = VERTEX_POINT('',#363195); +#363195 = CARTESIAN_POINT('',(150.625,-128.,-4.E-02)); +#363196 = LINE('',#363197,#363198); +#363197 = CARTESIAN_POINT('',(149.875,-128.,-4.E-02)); +#363198 = VECTOR('',#363199,1.); +#363199 = DIRECTION('',(1.,0.,0.)); +#363200 = ORIENTED_EDGE('',*,*,#363201,.F.); +#363201 = EDGE_CURVE('',#363202,#363194,#363204,.T.); +#363202 = VERTEX_POINT('',#363203); +#363203 = CARTESIAN_POINT('',(150.625,-128.,0.)); +#363204 = LINE('',#363205,#363206); +#363205 = CARTESIAN_POINT('',(150.625,-128.,0.)); +#363206 = VECTOR('',#363207,1.); +#363207 = DIRECTION('',(0.,0.,-1.)); +#363208 = ORIENTED_EDGE('',*,*,#363209,.F.); +#363209 = EDGE_CURVE('',#363170,#363202,#363210,.T.); +#363210 = LINE('',#363211,#363212); +#363211 = CARTESIAN_POINT('',(149.875,-128.,0.)); +#363212 = VECTOR('',#363213,1.); +#363213 = DIRECTION('',(1.,0.,0.)); +#363214 = PLANE('',#363215); +#363215 = AXIS2_PLACEMENT_3D('',#363216,#363217,#363218); +#363216 = CARTESIAN_POINT('',(149.875,-128.,0.)); +#363217 = DIRECTION('',(0.,-1.,0.)); +#363218 = DIRECTION('',(1.,0.,0.)); +#363219 = ADVANCED_FACE('',(#363220),#363247,.T.); +#363220 = FACE_BOUND('',#363221,.F.); +#363221 = EDGE_LOOP('',(#363222,#363223,#363232,#363240)); +#363222 = ORIENTED_EDGE('',*,*,#363201,.T.); +#363223 = ORIENTED_EDGE('',*,*,#363224,.T.); +#363224 = EDGE_CURVE('',#363194,#363225,#363227,.T.); +#363225 = VERTEX_POINT('',#363226); +#363226 = CARTESIAN_POINT('',(150.85,-128.225,-4.E-02)); +#363227 = CIRCLE('',#363228,0.225000087974); +#363228 = AXIS2_PLACEMENT_3D('',#363229,#363230,#363231); +#363229 = CARTESIAN_POINT('',(150.62499991202,-128.2250000879,-4.E-02)); +#363230 = DIRECTION('',(0.,0.,-1.)); +#363231 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#363232 = ORIENTED_EDGE('',*,*,#363233,.F.); +#363233 = EDGE_CURVE('',#363234,#363225,#363236,.T.); +#363234 = VERTEX_POINT('',#363235); +#363235 = CARTESIAN_POINT('',(150.85,-128.225,0.)); +#363236 = LINE('',#363237,#363238); +#363237 = CARTESIAN_POINT('',(150.85,-128.225,0.)); +#363238 = VECTOR('',#363239,1.); +#363239 = DIRECTION('',(0.,0.,-1.)); +#363240 = ORIENTED_EDGE('',*,*,#363241,.F.); +#363241 = EDGE_CURVE('',#363202,#363234,#363242,.T.); +#363242 = CIRCLE('',#363243,0.225000087974); +#363243 = AXIS2_PLACEMENT_3D('',#363244,#363245,#363246); +#363244 = CARTESIAN_POINT('',(150.62499991202,-128.2250000879,0.)); +#363245 = DIRECTION('',(0.,0.,-1.)); +#363246 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#363247 = CYLINDRICAL_SURFACE('',#363248,0.225000087974); +#363248 = AXIS2_PLACEMENT_3D('',#363249,#363250,#363251); +#363249 = CARTESIAN_POINT('',(150.62499991202,-128.2250000879,0.)); +#363250 = DIRECTION('',(-0.,-0.,1.)); +#363251 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#363252 = ADVANCED_FACE('',(#363253),#363278,.F.); +#363253 = FACE_BOUND('',#363254,.F.); +#363254 = EDGE_LOOP('',(#363255,#363256,#363264,#363272)); +#363255 = ORIENTED_EDGE('',*,*,#363233,.T.); +#363256 = ORIENTED_EDGE('',*,*,#363257,.T.); +#363257 = EDGE_CURVE('',#363225,#363258,#363260,.T.); +#363258 = VERTEX_POINT('',#363259); +#363259 = CARTESIAN_POINT('',(150.85,-128.675,-4.E-02)); +#363260 = LINE('',#363261,#363262); +#363261 = CARTESIAN_POINT('',(150.85,-128.225,-4.E-02)); +#363262 = VECTOR('',#363263,1.); +#363263 = DIRECTION('',(0.,-1.,0.)); +#363264 = ORIENTED_EDGE('',*,*,#363265,.F.); +#363265 = EDGE_CURVE('',#363266,#363258,#363268,.T.); +#363266 = VERTEX_POINT('',#363267); +#363267 = CARTESIAN_POINT('',(150.85,-128.675,0.)); +#363268 = LINE('',#363269,#363270); +#363269 = CARTESIAN_POINT('',(150.85,-128.675,0.)); +#363270 = VECTOR('',#363271,1.); +#363271 = DIRECTION('',(0.,0.,-1.)); +#363272 = ORIENTED_EDGE('',*,*,#363273,.F.); +#363273 = EDGE_CURVE('',#363234,#363266,#363274,.T.); +#363274 = LINE('',#363275,#363276); +#363275 = CARTESIAN_POINT('',(150.85,-128.225,0.)); +#363276 = VECTOR('',#363277,1.); +#363277 = DIRECTION('',(0.,-1.,0.)); +#363278 = PLANE('',#363279); +#363279 = AXIS2_PLACEMENT_3D('',#363280,#363281,#363282); +#363280 = CARTESIAN_POINT('',(150.85,-128.225,0.)); +#363281 = DIRECTION('',(-1.,-0.,-0.)); +#363282 = DIRECTION('',(0.,-1.,0.)); +#363283 = ADVANCED_FACE('',(#363284),#363311,.T.); +#363284 = FACE_BOUND('',#363285,.F.); +#363285 = EDGE_LOOP('',(#363286,#363287,#363296,#363304)); +#363286 = ORIENTED_EDGE('',*,*,#363265,.T.); +#363287 = ORIENTED_EDGE('',*,*,#363288,.T.); +#363288 = EDGE_CURVE('',#363258,#363289,#363291,.T.); +#363289 = VERTEX_POINT('',#363290); +#363290 = CARTESIAN_POINT('',(150.625,-128.9,-4.E-02)); +#363291 = CIRCLE('',#363292,0.225000087974); +#363292 = AXIS2_PLACEMENT_3D('',#363293,#363294,#363295); +#363293 = CARTESIAN_POINT('',(150.62499991202,-128.674999912,-4.E-02)); +#363294 = DIRECTION('',(0.,0.,-1.)); +#363295 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#363296 = ORIENTED_EDGE('',*,*,#363297,.F.); +#363297 = EDGE_CURVE('',#363298,#363289,#363300,.T.); +#363298 = VERTEX_POINT('',#363299); +#363299 = CARTESIAN_POINT('',(150.625,-128.9,0.)); +#363300 = LINE('',#363301,#363302); +#363301 = CARTESIAN_POINT('',(150.625,-128.9,0.)); +#363302 = VECTOR('',#363303,1.); +#363303 = DIRECTION('',(0.,0.,-1.)); +#363304 = ORIENTED_EDGE('',*,*,#363305,.F.); +#363305 = EDGE_CURVE('',#363266,#363298,#363306,.T.); +#363306 = CIRCLE('',#363307,0.225000087974); +#363307 = AXIS2_PLACEMENT_3D('',#363308,#363309,#363310); +#363308 = CARTESIAN_POINT('',(150.62499991202,-128.674999912,0.)); +#363309 = DIRECTION('',(0.,0.,-1.)); +#363310 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#363311 = CYLINDRICAL_SURFACE('',#363312,0.225000087974); +#363312 = AXIS2_PLACEMENT_3D('',#363313,#363314,#363315); +#363313 = CARTESIAN_POINT('',(150.62499991202,-128.674999912,0.)); +#363314 = DIRECTION('',(-0.,-0.,1.)); +#363315 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#363316 = ADVANCED_FACE('',(#363317),#363342,.F.); +#363317 = FACE_BOUND('',#363318,.F.); +#363318 = EDGE_LOOP('',(#363319,#363320,#363328,#363336)); +#363319 = ORIENTED_EDGE('',*,*,#363297,.T.); +#363320 = ORIENTED_EDGE('',*,*,#363321,.T.); +#363321 = EDGE_CURVE('',#363289,#363322,#363324,.T.); +#363322 = VERTEX_POINT('',#363323); +#363323 = CARTESIAN_POINT('',(149.875,-128.9,-4.E-02)); +#363324 = LINE('',#363325,#363326); +#363325 = CARTESIAN_POINT('',(150.625,-128.9,-4.E-02)); +#363326 = VECTOR('',#363327,1.); +#363327 = DIRECTION('',(-1.,0.,0.)); +#363328 = ORIENTED_EDGE('',*,*,#363329,.F.); +#363329 = EDGE_CURVE('',#363330,#363322,#363332,.T.); +#363330 = VERTEX_POINT('',#363331); +#363331 = CARTESIAN_POINT('',(149.875,-128.9,0.)); +#363332 = LINE('',#363333,#363334); +#363333 = CARTESIAN_POINT('',(149.875,-128.9,0.)); +#363334 = VECTOR('',#363335,1.); +#363335 = DIRECTION('',(0.,0.,-1.)); +#363336 = ORIENTED_EDGE('',*,*,#363337,.F.); +#363337 = EDGE_CURVE('',#363298,#363330,#363338,.T.); +#363338 = LINE('',#363339,#363340); +#363339 = CARTESIAN_POINT('',(150.625,-128.9,0.)); +#363340 = VECTOR('',#363341,1.); +#363341 = DIRECTION('',(-1.,0.,0.)); +#363342 = PLANE('',#363343); +#363343 = AXIS2_PLACEMENT_3D('',#363344,#363345,#363346); +#363344 = CARTESIAN_POINT('',(150.625,-128.9,0.)); +#363345 = DIRECTION('',(0.,1.,0.)); +#363346 = DIRECTION('',(-1.,0.,0.)); +#363347 = ADVANCED_FACE('',(#363348),#363375,.T.); +#363348 = FACE_BOUND('',#363349,.F.); +#363349 = EDGE_LOOP('',(#363350,#363351,#363360,#363368)); +#363350 = ORIENTED_EDGE('',*,*,#363329,.T.); +#363351 = ORIENTED_EDGE('',*,*,#363352,.T.); +#363352 = EDGE_CURVE('',#363322,#363353,#363355,.T.); +#363353 = VERTEX_POINT('',#363354); +#363354 = CARTESIAN_POINT('',(149.65,-128.675,-4.E-02)); +#363355 = CIRCLE('',#363356,0.225000087974); +#363356 = AXIS2_PLACEMENT_3D('',#363357,#363358,#363359); +#363357 = CARTESIAN_POINT('',(149.87500008797,-128.674999912,-4.E-02)); +#363358 = DIRECTION('',(0.,0.,-1.)); +#363359 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#363360 = ORIENTED_EDGE('',*,*,#363361,.F.); +#363361 = EDGE_CURVE('',#363362,#363353,#363364,.T.); +#363362 = VERTEX_POINT('',#363363); +#363363 = CARTESIAN_POINT('',(149.65,-128.675,0.)); +#363364 = LINE('',#363365,#363366); +#363365 = CARTESIAN_POINT('',(149.65,-128.675,0.)); +#363366 = VECTOR('',#363367,1.); +#363367 = DIRECTION('',(0.,0.,-1.)); +#363368 = ORIENTED_EDGE('',*,*,#363369,.F.); +#363369 = EDGE_CURVE('',#363330,#363362,#363370,.T.); +#363370 = CIRCLE('',#363371,0.225000087974); +#363371 = AXIS2_PLACEMENT_3D('',#363372,#363373,#363374); +#363372 = CARTESIAN_POINT('',(149.87500008797,-128.674999912,0.)); +#363373 = DIRECTION('',(0.,0.,-1.)); +#363374 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#363375 = CYLINDRICAL_SURFACE('',#363376,0.225000087974); +#363376 = AXIS2_PLACEMENT_3D('',#363377,#363378,#363379); +#363377 = CARTESIAN_POINT('',(149.87500008797,-128.674999912,0.)); +#363378 = DIRECTION('',(-0.,-0.,1.)); +#363379 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#363380 = ADVANCED_FACE('',(#363381),#363397,.F.); +#363381 = FACE_BOUND('',#363382,.F.); +#363382 = EDGE_LOOP('',(#363383,#363384,#363390,#363391)); +#363383 = ORIENTED_EDGE('',*,*,#363361,.T.); +#363384 = ORIENTED_EDGE('',*,*,#363385,.T.); +#363385 = EDGE_CURVE('',#363353,#363153,#363386,.T.); +#363386 = LINE('',#363387,#363388); +#363387 = CARTESIAN_POINT('',(149.65,-128.675,-4.E-02)); +#363388 = VECTOR('',#363389,1.); +#363389 = DIRECTION('',(0.,1.,0.)); +#363390 = ORIENTED_EDGE('',*,*,#363150,.F.); +#363391 = ORIENTED_EDGE('',*,*,#363392,.F.); +#363392 = EDGE_CURVE('',#363362,#363151,#363393,.T.); +#363393 = LINE('',#363394,#363395); +#363394 = CARTESIAN_POINT('',(149.65,-128.675,0.)); +#363395 = VECTOR('',#363396,1.); +#363396 = DIRECTION('',(0.,1.,0.)); +#363397 = PLANE('',#363398); +#363398 = AXIS2_PLACEMENT_3D('',#363399,#363400,#363401); +#363399 = CARTESIAN_POINT('',(149.65,-128.675,0.)); +#363400 = DIRECTION('',(1.,-0.,0.)); +#363401 = DIRECTION('',(0.,1.,0.)); +#363402 = ADVANCED_FACE('',(#363403),#363413,.F.); +#363403 = FACE_BOUND('',#363404,.F.); +#363404 = EDGE_LOOP('',(#363405,#363406,#363407,#363408,#363409,#363410, + #363411,#363412)); +#363405 = ORIENTED_EDGE('',*,*,#363177,.T.); +#363406 = ORIENTED_EDGE('',*,*,#363209,.T.); +#363407 = ORIENTED_EDGE('',*,*,#363241,.T.); +#363408 = ORIENTED_EDGE('',*,*,#363273,.T.); +#363409 = ORIENTED_EDGE('',*,*,#363305,.T.); +#363410 = ORIENTED_EDGE('',*,*,#363337,.T.); +#363411 = ORIENTED_EDGE('',*,*,#363369,.T.); +#363412 = ORIENTED_EDGE('',*,*,#363392,.T.); +#363413 = PLANE('',#363414); +#363414 = AXIS2_PLACEMENT_3D('',#363415,#363416,#363417); +#363415 = CARTESIAN_POINT('',(0.,0.,0.)); +#363416 = DIRECTION('',(-0.,-0.,-1.)); +#363417 = DIRECTION('',(-1.,0.,0.)); +#363418 = ADVANCED_FACE('',(#363419),#363429,.T.); +#363419 = FACE_BOUND('',#363420,.T.); +#363420 = EDGE_LOOP('',(#363421,#363422,#363423,#363424,#363425,#363426, + #363427,#363428)); +#363421 = ORIENTED_EDGE('',*,*,#363160,.T.); +#363422 = ORIENTED_EDGE('',*,*,#363193,.T.); +#363423 = ORIENTED_EDGE('',*,*,#363224,.T.); +#363424 = ORIENTED_EDGE('',*,*,#363257,.T.); +#363425 = ORIENTED_EDGE('',*,*,#363288,.T.); +#363426 = ORIENTED_EDGE('',*,*,#363321,.T.); +#363427 = ORIENTED_EDGE('',*,*,#363352,.T.); +#363428 = ORIENTED_EDGE('',*,*,#363385,.T.); +#363429 = PLANE('',#363430); +#363430 = AXIS2_PLACEMENT_3D('',#363431,#363432,#363433); +#363431 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#363432 = DIRECTION('',(-0.,-0.,-1.)); +#363433 = DIRECTION('',(-1.,0.,0.)); +#363434 = MANIFOLD_SOLID_BREP('',#363435); +#363435 = CLOSED_SHELL('',(#363436,#363478,#363509,#363542,#363573, + #363606,#363637,#363670,#363692,#363708)); +#363436 = ADVANCED_FACE('',(#363437),#363473,.T.); +#363437 = FACE_BOUND('',#363438,.F.); +#363438 = EDGE_LOOP('',(#363439,#363449,#363458,#363466)); +#363439 = ORIENTED_EDGE('',*,*,#363440,.T.); +#363440 = EDGE_CURVE('',#363441,#363443,#363445,.T.); +#363441 = VERTEX_POINT('',#363442); +#363442 = CARTESIAN_POINT('',(149.93,-130.505,0.)); +#363443 = VERTEX_POINT('',#363444); +#363444 = CARTESIAN_POINT('',(149.93,-130.505,-4.E-02)); +#363445 = LINE('',#363446,#363447); +#363446 = CARTESIAN_POINT('',(149.93,-130.505,0.)); +#363447 = VECTOR('',#363448,1.); +#363448 = DIRECTION('',(0.,0.,-1.)); +#363449 = ORIENTED_EDGE('',*,*,#363450,.T.); +#363450 = EDGE_CURVE('',#363443,#363451,#363453,.T.); +#363451 = VERTEX_POINT('',#363452); +#363452 = CARTESIAN_POINT('',(150.065,-130.37,-4.E-02)); +#363453 = CIRCLE('',#363454,0.135001418495); +#363454 = AXIS2_PLACEMENT_3D('',#363455,#363456,#363457); +#363455 = CARTESIAN_POINT('',(150.06500141848,-130.5050014184,-4.E-02)); +#363456 = DIRECTION('',(0.,0.,-1.)); +#363457 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#363458 = ORIENTED_EDGE('',*,*,#363459,.F.); +#363459 = EDGE_CURVE('',#363460,#363451,#363462,.T.); +#363460 = VERTEX_POINT('',#363461); +#363461 = CARTESIAN_POINT('',(150.065,-130.37,0.)); +#363462 = LINE('',#363463,#363464); +#363463 = CARTESIAN_POINT('',(150.065,-130.37,0.)); +#363464 = VECTOR('',#363465,1.); +#363465 = DIRECTION('',(0.,0.,-1.)); +#363466 = ORIENTED_EDGE('',*,*,#363467,.F.); +#363467 = EDGE_CURVE('',#363441,#363460,#363468,.T.); +#363468 = CIRCLE('',#363469,0.135001418495); +#363469 = AXIS2_PLACEMENT_3D('',#363470,#363471,#363472); +#363470 = CARTESIAN_POINT('',(150.06500141848,-130.5050014184,0.)); +#363471 = DIRECTION('',(0.,0.,-1.)); +#363472 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#363473 = CYLINDRICAL_SURFACE('',#363474,0.135001418495); +#363474 = AXIS2_PLACEMENT_3D('',#363475,#363476,#363477); +#363475 = CARTESIAN_POINT('',(150.06500141848,-130.5050014184,0.)); +#363476 = DIRECTION('',(-0.,-0.,1.)); +#363477 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#363478 = ADVANCED_FACE('',(#363479),#363504,.F.); +#363479 = FACE_BOUND('',#363480,.F.); +#363480 = EDGE_LOOP('',(#363481,#363482,#363490,#363498)); +#363481 = ORIENTED_EDGE('',*,*,#363459,.T.); +#363482 = ORIENTED_EDGE('',*,*,#363483,.T.); +#363483 = EDGE_CURVE('',#363451,#363484,#363486,.T.); +#363484 = VERTEX_POINT('',#363485); +#363485 = CARTESIAN_POINT('',(150.435,-130.37,-4.E-02)); +#363486 = LINE('',#363487,#363488); +#363487 = CARTESIAN_POINT('',(150.065,-130.37,-4.E-02)); +#363488 = VECTOR('',#363489,1.); +#363489 = DIRECTION('',(1.,0.,0.)); +#363490 = ORIENTED_EDGE('',*,*,#363491,.F.); +#363491 = EDGE_CURVE('',#363492,#363484,#363494,.T.); +#363492 = VERTEX_POINT('',#363493); +#363493 = CARTESIAN_POINT('',(150.435,-130.37,0.)); +#363494 = LINE('',#363495,#363496); +#363495 = CARTESIAN_POINT('',(150.435,-130.37,0.)); +#363496 = VECTOR('',#363497,1.); +#363497 = DIRECTION('',(0.,0.,-1.)); +#363498 = ORIENTED_EDGE('',*,*,#363499,.F.); +#363499 = EDGE_CURVE('',#363460,#363492,#363500,.T.); +#363500 = LINE('',#363501,#363502); +#363501 = CARTESIAN_POINT('',(150.065,-130.37,0.)); +#363502 = VECTOR('',#363503,1.); +#363503 = DIRECTION('',(1.,0.,0.)); +#363504 = PLANE('',#363505); +#363505 = AXIS2_PLACEMENT_3D('',#363506,#363507,#363508); +#363506 = CARTESIAN_POINT('',(150.065,-130.37,0.)); +#363507 = DIRECTION('',(0.,-1.,0.)); +#363508 = DIRECTION('',(1.,0.,0.)); +#363509 = ADVANCED_FACE('',(#363510),#363537,.T.); +#363510 = FACE_BOUND('',#363511,.F.); +#363511 = EDGE_LOOP('',(#363512,#363513,#363522,#363530)); +#363512 = ORIENTED_EDGE('',*,*,#363491,.T.); +#363513 = ORIENTED_EDGE('',*,*,#363514,.T.); +#363514 = EDGE_CURVE('',#363484,#363515,#363517,.T.); +#363515 = VERTEX_POINT('',#363516); +#363516 = CARTESIAN_POINT('',(150.57,-130.505,-4.E-02)); +#363517 = CIRCLE('',#363518,0.135001418495); +#363518 = AXIS2_PLACEMENT_3D('',#363519,#363520,#363521); +#363519 = CARTESIAN_POINT('',(150.43499858151,-130.5050014184,-4.E-02)); +#363520 = DIRECTION('',(0.,0.,-1.)); +#363521 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#363522 = ORIENTED_EDGE('',*,*,#363523,.F.); +#363523 = EDGE_CURVE('',#363524,#363515,#363526,.T.); +#363524 = VERTEX_POINT('',#363525); +#363525 = CARTESIAN_POINT('',(150.57,-130.505,0.)); +#363526 = LINE('',#363527,#363528); +#363527 = CARTESIAN_POINT('',(150.57,-130.505,0.)); +#363528 = VECTOR('',#363529,1.); +#363529 = DIRECTION('',(0.,0.,-1.)); +#363530 = ORIENTED_EDGE('',*,*,#363531,.F.); +#363531 = EDGE_CURVE('',#363492,#363524,#363532,.T.); +#363532 = CIRCLE('',#363533,0.135001418495); +#363533 = AXIS2_PLACEMENT_3D('',#363534,#363535,#363536); +#363534 = CARTESIAN_POINT('',(150.43499858151,-130.5050014184,0.)); +#363535 = DIRECTION('',(0.,0.,-1.)); +#363536 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#363537 = CYLINDRICAL_SURFACE('',#363538,0.135001418495); +#363538 = AXIS2_PLACEMENT_3D('',#363539,#363540,#363541); +#363539 = CARTESIAN_POINT('',(150.43499858151,-130.5050014184,0.)); +#363540 = DIRECTION('',(-0.,-0.,1.)); +#363541 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#363542 = ADVANCED_FACE('',(#363543),#363568,.F.); +#363543 = FACE_BOUND('',#363544,.F.); +#363544 = EDGE_LOOP('',(#363545,#363546,#363554,#363562)); +#363545 = ORIENTED_EDGE('',*,*,#363523,.T.); +#363546 = ORIENTED_EDGE('',*,*,#363547,.T.); +#363547 = EDGE_CURVE('',#363515,#363548,#363550,.T.); +#363548 = VERTEX_POINT('',#363549); +#363549 = CARTESIAN_POINT('',(150.57,-130.775,-4.E-02)); +#363550 = LINE('',#363551,#363552); +#363551 = CARTESIAN_POINT('',(150.57,-130.505,-4.E-02)); +#363552 = VECTOR('',#363553,1.); +#363553 = DIRECTION('',(0.,-1.,0.)); +#363554 = ORIENTED_EDGE('',*,*,#363555,.F.); +#363555 = EDGE_CURVE('',#363556,#363548,#363558,.T.); +#363556 = VERTEX_POINT('',#363557); +#363557 = CARTESIAN_POINT('',(150.57,-130.775,0.)); +#363558 = LINE('',#363559,#363560); +#363559 = CARTESIAN_POINT('',(150.57,-130.775,0.)); +#363560 = VECTOR('',#363561,1.); +#363561 = DIRECTION('',(0.,0.,-1.)); +#363562 = ORIENTED_EDGE('',*,*,#363563,.F.); +#363563 = EDGE_CURVE('',#363524,#363556,#363564,.T.); +#363564 = LINE('',#363565,#363566); +#363565 = CARTESIAN_POINT('',(150.57,-130.505,0.)); +#363566 = VECTOR('',#363567,1.); +#363567 = DIRECTION('',(0.,-1.,0.)); +#363568 = PLANE('',#363569); +#363569 = AXIS2_PLACEMENT_3D('',#363570,#363571,#363572); +#363570 = CARTESIAN_POINT('',(150.57,-130.505,0.)); +#363571 = DIRECTION('',(-1.,-0.,-0.)); +#363572 = DIRECTION('',(0.,-1.,0.)); +#363573 = ADVANCED_FACE('',(#363574),#363601,.T.); +#363574 = FACE_BOUND('',#363575,.F.); +#363575 = EDGE_LOOP('',(#363576,#363577,#363586,#363594)); +#363576 = ORIENTED_EDGE('',*,*,#363555,.T.); +#363577 = ORIENTED_EDGE('',*,*,#363578,.T.); +#363578 = EDGE_CURVE('',#363548,#363579,#363581,.T.); +#363579 = VERTEX_POINT('',#363580); +#363580 = CARTESIAN_POINT('',(150.435,-130.91,-4.E-02)); +#363581 = CIRCLE('',#363582,0.135001418495); +#363582 = AXIS2_PLACEMENT_3D('',#363583,#363584,#363585); +#363583 = CARTESIAN_POINT('',(150.43499858151,-130.7749985815,-4.E-02)); +#363584 = DIRECTION('',(0.,0.,-1.)); +#363585 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#363586 = ORIENTED_EDGE('',*,*,#363587,.F.); +#363587 = EDGE_CURVE('',#363588,#363579,#363590,.T.); +#363588 = VERTEX_POINT('',#363589); +#363589 = CARTESIAN_POINT('',(150.435,-130.91,0.)); +#363590 = LINE('',#363591,#363592); +#363591 = CARTESIAN_POINT('',(150.435,-130.91,0.)); +#363592 = VECTOR('',#363593,1.); +#363593 = DIRECTION('',(0.,0.,-1.)); +#363594 = ORIENTED_EDGE('',*,*,#363595,.F.); +#363595 = EDGE_CURVE('',#363556,#363588,#363596,.T.); +#363596 = CIRCLE('',#363597,0.135001418495); +#363597 = AXIS2_PLACEMENT_3D('',#363598,#363599,#363600); +#363598 = CARTESIAN_POINT('',(150.43499858151,-130.7749985815,0.)); +#363599 = DIRECTION('',(0.,0.,-1.)); +#363600 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#363601 = CYLINDRICAL_SURFACE('',#363602,0.135001418495); +#363602 = AXIS2_PLACEMENT_3D('',#363603,#363604,#363605); +#363603 = CARTESIAN_POINT('',(150.43499858151,-130.7749985815,0.)); +#363604 = DIRECTION('',(-0.,-0.,1.)); +#363605 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#363606 = ADVANCED_FACE('',(#363607),#363632,.F.); +#363607 = FACE_BOUND('',#363608,.F.); +#363608 = EDGE_LOOP('',(#363609,#363610,#363618,#363626)); +#363609 = ORIENTED_EDGE('',*,*,#363587,.T.); +#363610 = ORIENTED_EDGE('',*,*,#363611,.T.); +#363611 = EDGE_CURVE('',#363579,#363612,#363614,.T.); +#363612 = VERTEX_POINT('',#363613); +#363613 = CARTESIAN_POINT('',(150.065,-130.91,-4.E-02)); +#363614 = LINE('',#363615,#363616); +#363615 = CARTESIAN_POINT('',(150.435,-130.91,-4.E-02)); +#363616 = VECTOR('',#363617,1.); +#363617 = DIRECTION('',(-1.,0.,0.)); +#363618 = ORIENTED_EDGE('',*,*,#363619,.F.); +#363619 = EDGE_CURVE('',#363620,#363612,#363622,.T.); +#363620 = VERTEX_POINT('',#363621); +#363621 = CARTESIAN_POINT('',(150.065,-130.91,0.)); +#363622 = LINE('',#363623,#363624); +#363623 = CARTESIAN_POINT('',(150.065,-130.91,0.)); +#363624 = VECTOR('',#363625,1.); +#363625 = DIRECTION('',(0.,0.,-1.)); +#363626 = ORIENTED_EDGE('',*,*,#363627,.F.); +#363627 = EDGE_CURVE('',#363588,#363620,#363628,.T.); +#363628 = LINE('',#363629,#363630); +#363629 = CARTESIAN_POINT('',(150.435,-130.91,0.)); +#363630 = VECTOR('',#363631,1.); +#363631 = DIRECTION('',(-1.,0.,0.)); +#363632 = PLANE('',#363633); +#363633 = AXIS2_PLACEMENT_3D('',#363634,#363635,#363636); +#363634 = CARTESIAN_POINT('',(150.435,-130.91,0.)); +#363635 = DIRECTION('',(0.,1.,0.)); +#363636 = DIRECTION('',(-1.,0.,0.)); +#363637 = ADVANCED_FACE('',(#363638),#363665,.T.); +#363638 = FACE_BOUND('',#363639,.F.); +#363639 = EDGE_LOOP('',(#363640,#363641,#363650,#363658)); +#363640 = ORIENTED_EDGE('',*,*,#363619,.T.); +#363641 = ORIENTED_EDGE('',*,*,#363642,.T.); +#363642 = EDGE_CURVE('',#363612,#363643,#363645,.T.); +#363643 = VERTEX_POINT('',#363644); +#363644 = CARTESIAN_POINT('',(149.93,-130.775,-4.E-02)); +#363645 = CIRCLE('',#363646,0.135001418495); +#363646 = AXIS2_PLACEMENT_3D('',#363647,#363648,#363649); +#363647 = CARTESIAN_POINT('',(150.06500141848,-130.7749985815,-4.E-02)); +#363648 = DIRECTION('',(0.,0.,-1.)); +#363649 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#363650 = ORIENTED_EDGE('',*,*,#363651,.F.); +#363651 = EDGE_CURVE('',#363652,#363643,#363654,.T.); +#363652 = VERTEX_POINT('',#363653); +#363653 = CARTESIAN_POINT('',(149.93,-130.775,0.)); +#363654 = LINE('',#363655,#363656); +#363655 = CARTESIAN_POINT('',(149.93,-130.775,0.)); +#363656 = VECTOR('',#363657,1.); +#363657 = DIRECTION('',(0.,0.,-1.)); +#363658 = ORIENTED_EDGE('',*,*,#363659,.F.); +#363659 = EDGE_CURVE('',#363620,#363652,#363660,.T.); +#363660 = CIRCLE('',#363661,0.135001418495); +#363661 = AXIS2_PLACEMENT_3D('',#363662,#363663,#363664); +#363662 = CARTESIAN_POINT('',(150.06500141848,-130.7749985815,0.)); +#363663 = DIRECTION('',(0.,0.,-1.)); +#363664 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#363665 = CYLINDRICAL_SURFACE('',#363666,0.135001418495); +#363666 = AXIS2_PLACEMENT_3D('',#363667,#363668,#363669); +#363667 = CARTESIAN_POINT('',(150.06500141848,-130.7749985815,0.)); +#363668 = DIRECTION('',(-0.,-0.,1.)); +#363669 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#363670 = ADVANCED_FACE('',(#363671),#363687,.F.); +#363671 = FACE_BOUND('',#363672,.F.); +#363672 = EDGE_LOOP('',(#363673,#363674,#363680,#363681)); +#363673 = ORIENTED_EDGE('',*,*,#363651,.T.); +#363674 = ORIENTED_EDGE('',*,*,#363675,.T.); +#363675 = EDGE_CURVE('',#363643,#363443,#363676,.T.); +#363676 = LINE('',#363677,#363678); +#363677 = CARTESIAN_POINT('',(149.93,-130.775,-4.E-02)); +#363678 = VECTOR('',#363679,1.); +#363679 = DIRECTION('',(0.,1.,0.)); +#363680 = ORIENTED_EDGE('',*,*,#363440,.F.); +#363681 = ORIENTED_EDGE('',*,*,#363682,.F.); +#363682 = EDGE_CURVE('',#363652,#363441,#363683,.T.); +#363683 = LINE('',#363684,#363685); +#363684 = CARTESIAN_POINT('',(149.93,-130.775,0.)); +#363685 = VECTOR('',#363686,1.); +#363686 = DIRECTION('',(0.,1.,0.)); +#363687 = PLANE('',#363688); +#363688 = AXIS2_PLACEMENT_3D('',#363689,#363690,#363691); +#363689 = CARTESIAN_POINT('',(149.93,-130.775,0.)); +#363690 = DIRECTION('',(1.,-0.,0.)); +#363691 = DIRECTION('',(0.,1.,0.)); +#363692 = ADVANCED_FACE('',(#363693),#363703,.F.); +#363693 = FACE_BOUND('',#363694,.F.); +#363694 = EDGE_LOOP('',(#363695,#363696,#363697,#363698,#363699,#363700, + #363701,#363702)); +#363695 = ORIENTED_EDGE('',*,*,#363467,.T.); +#363696 = ORIENTED_EDGE('',*,*,#363499,.T.); +#363697 = ORIENTED_EDGE('',*,*,#363531,.T.); +#363698 = ORIENTED_EDGE('',*,*,#363563,.T.); +#363699 = ORIENTED_EDGE('',*,*,#363595,.T.); +#363700 = ORIENTED_EDGE('',*,*,#363627,.T.); +#363701 = ORIENTED_EDGE('',*,*,#363659,.T.); +#363702 = ORIENTED_EDGE('',*,*,#363682,.T.); +#363703 = PLANE('',#363704); +#363704 = AXIS2_PLACEMENT_3D('',#363705,#363706,#363707); +#363705 = CARTESIAN_POINT('',(0.,0.,0.)); +#363706 = DIRECTION('',(-0.,-0.,-1.)); +#363707 = DIRECTION('',(-1.,0.,0.)); +#363708 = ADVANCED_FACE('',(#363709),#363719,.T.); +#363709 = FACE_BOUND('',#363710,.T.); +#363710 = EDGE_LOOP('',(#363711,#363712,#363713,#363714,#363715,#363716, + #363717,#363718)); +#363711 = ORIENTED_EDGE('',*,*,#363450,.T.); +#363712 = ORIENTED_EDGE('',*,*,#363483,.T.); +#363713 = ORIENTED_EDGE('',*,*,#363514,.T.); +#363714 = ORIENTED_EDGE('',*,*,#363547,.T.); +#363715 = ORIENTED_EDGE('',*,*,#363578,.T.); +#363716 = ORIENTED_EDGE('',*,*,#363611,.T.); +#363717 = ORIENTED_EDGE('',*,*,#363642,.T.); +#363718 = ORIENTED_EDGE('',*,*,#363675,.T.); +#363719 = PLANE('',#363720); +#363720 = AXIS2_PLACEMENT_3D('',#363721,#363722,#363723); +#363721 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#363722 = DIRECTION('',(-0.,-0.,-1.)); +#363723 = DIRECTION('',(-1.,0.,0.)); +#363724 = MANIFOLD_SOLID_BREP('',#363725); +#363725 = CLOSED_SHELL('',(#363726,#363768,#363799,#363832,#363863, + #363896,#363927,#363960,#363982,#363998)); +#363726 = ADVANCED_FACE('',(#363727),#363763,.T.); +#363727 = FACE_BOUND('',#363728,.F.); +#363728 = EDGE_LOOP('',(#363729,#363739,#363748,#363756)); +#363729 = ORIENTED_EDGE('',*,*,#363730,.T.); +#363730 = EDGE_CURVE('',#363731,#363733,#363735,.T.); +#363731 = VERTEX_POINT('',#363732); +#363732 = CARTESIAN_POINT('',(146.9875,-125.75,0.)); +#363733 = VERTEX_POINT('',#363734); +#363734 = CARTESIAN_POINT('',(146.9875,-125.75,-4.E-02)); +#363735 = LINE('',#363736,#363737); +#363736 = CARTESIAN_POINT('',(146.9875,-125.75,0.)); +#363737 = VECTOR('',#363738,1.); +#363738 = DIRECTION('',(0.,0.,-1.)); +#363739 = ORIENTED_EDGE('',*,*,#363740,.T.); +#363740 = EDGE_CURVE('',#363733,#363741,#363743,.T.); +#363741 = VERTEX_POINT('',#363742); +#363742 = CARTESIAN_POINT('',(147.1375,-125.6,-4.E-02)); +#363743 = CIRCLE('',#363744,0.150000058649); +#363744 = AXIS2_PLACEMENT_3D('',#363745,#363746,#363747); +#363745 = CARTESIAN_POINT('',(147.13750005864,-125.7500000586,-4.E-02)); +#363746 = DIRECTION('',(0.,0.,-1.)); +#363747 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#363748 = ORIENTED_EDGE('',*,*,#363749,.F.); +#363749 = EDGE_CURVE('',#363750,#363741,#363752,.T.); +#363750 = VERTEX_POINT('',#363751); +#363751 = CARTESIAN_POINT('',(147.1375,-125.6,0.)); +#363752 = LINE('',#363753,#363754); +#363753 = CARTESIAN_POINT('',(147.1375,-125.6,0.)); +#363754 = VECTOR('',#363755,1.); +#363755 = DIRECTION('',(0.,0.,-1.)); +#363756 = ORIENTED_EDGE('',*,*,#363757,.F.); +#363757 = EDGE_CURVE('',#363731,#363750,#363758,.T.); +#363758 = CIRCLE('',#363759,0.150000058649); +#363759 = AXIS2_PLACEMENT_3D('',#363760,#363761,#363762); +#363760 = CARTESIAN_POINT('',(147.13750005864,-125.7500000586,0.)); +#363761 = DIRECTION('',(0.,0.,-1.)); +#363762 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#363763 = CYLINDRICAL_SURFACE('',#363764,0.150000058649); +#363764 = AXIS2_PLACEMENT_3D('',#363765,#363766,#363767); +#363765 = CARTESIAN_POINT('',(147.13750005864,-125.7500000586,0.)); +#363766 = DIRECTION('',(-0.,-0.,1.)); +#363767 = DIRECTION('',(-1.,3.90995124759E-07,0.)); +#363768 = ADVANCED_FACE('',(#363769),#363794,.F.); +#363769 = FACE_BOUND('',#363770,.F.); +#363770 = EDGE_LOOP('',(#363771,#363772,#363780,#363788)); +#363771 = ORIENTED_EDGE('',*,*,#363749,.T.); +#363772 = ORIENTED_EDGE('',*,*,#363773,.T.); +#363773 = EDGE_CURVE('',#363741,#363774,#363776,.T.); +#363774 = VERTEX_POINT('',#363775); +#363775 = CARTESIAN_POINT('',(148.3125,-125.6,-4.E-02)); +#363776 = LINE('',#363777,#363778); +#363777 = CARTESIAN_POINT('',(147.1375,-125.6,-4.E-02)); +#363778 = VECTOR('',#363779,1.); +#363779 = DIRECTION('',(1.,0.,0.)); +#363780 = ORIENTED_EDGE('',*,*,#363781,.F.); +#363781 = EDGE_CURVE('',#363782,#363774,#363784,.T.); +#363782 = VERTEX_POINT('',#363783); +#363783 = CARTESIAN_POINT('',(148.3125,-125.6,0.)); +#363784 = LINE('',#363785,#363786); +#363785 = CARTESIAN_POINT('',(148.3125,-125.6,0.)); +#363786 = VECTOR('',#363787,1.); +#363787 = DIRECTION('',(0.,0.,-1.)); +#363788 = ORIENTED_EDGE('',*,*,#363789,.F.); +#363789 = EDGE_CURVE('',#363750,#363782,#363790,.T.); +#363790 = LINE('',#363791,#363792); +#363791 = CARTESIAN_POINT('',(147.1375,-125.6,0.)); +#363792 = VECTOR('',#363793,1.); +#363793 = DIRECTION('',(1.,0.,0.)); +#363794 = PLANE('',#363795); +#363795 = AXIS2_PLACEMENT_3D('',#363796,#363797,#363798); +#363796 = CARTESIAN_POINT('',(147.1375,-125.6,0.)); +#363797 = DIRECTION('',(0.,-1.,0.)); +#363798 = DIRECTION('',(1.,0.,0.)); +#363799 = ADVANCED_FACE('',(#363800),#363827,.T.); +#363800 = FACE_BOUND('',#363801,.F.); +#363801 = EDGE_LOOP('',(#363802,#363803,#363812,#363820)); +#363802 = ORIENTED_EDGE('',*,*,#363781,.T.); +#363803 = ORIENTED_EDGE('',*,*,#363804,.T.); +#363804 = EDGE_CURVE('',#363774,#363805,#363807,.T.); +#363805 = VERTEX_POINT('',#363806); +#363806 = CARTESIAN_POINT('',(148.4625,-125.75,-4.E-02)); +#363807 = CIRCLE('',#363808,0.150000058649); +#363808 = AXIS2_PLACEMENT_3D('',#363809,#363810,#363811); +#363809 = CARTESIAN_POINT('',(148.31249994135,-125.7500000586,-4.E-02)); +#363810 = DIRECTION('',(0.,0.,-1.)); +#363811 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#363812 = ORIENTED_EDGE('',*,*,#363813,.F.); +#363813 = EDGE_CURVE('',#363814,#363805,#363816,.T.); +#363814 = VERTEX_POINT('',#363815); +#363815 = CARTESIAN_POINT('',(148.4625,-125.75,0.)); +#363816 = LINE('',#363817,#363818); +#363817 = CARTESIAN_POINT('',(148.4625,-125.75,0.)); +#363818 = VECTOR('',#363819,1.); +#363819 = DIRECTION('',(0.,0.,-1.)); +#363820 = ORIENTED_EDGE('',*,*,#363821,.F.); +#363821 = EDGE_CURVE('',#363782,#363814,#363822,.T.); +#363822 = CIRCLE('',#363823,0.150000058649); +#363823 = AXIS2_PLACEMENT_3D('',#363824,#363825,#363826); +#363824 = CARTESIAN_POINT('',(148.31249994135,-125.7500000586,0.)); +#363825 = DIRECTION('',(0.,0.,-1.)); +#363826 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#363827 = CYLINDRICAL_SURFACE('',#363828,0.150000058649); +#363828 = AXIS2_PLACEMENT_3D('',#363829,#363830,#363831); +#363829 = CARTESIAN_POINT('',(148.31249994135,-125.7500000586,0.)); +#363830 = DIRECTION('',(-0.,-0.,1.)); +#363831 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#363832 = ADVANCED_FACE('',(#363833),#363858,.F.); +#363833 = FACE_BOUND('',#363834,.F.); +#363834 = EDGE_LOOP('',(#363835,#363836,#363844,#363852)); +#363835 = ORIENTED_EDGE('',*,*,#363813,.T.); +#363836 = ORIENTED_EDGE('',*,*,#363837,.T.); +#363837 = EDGE_CURVE('',#363805,#363838,#363840,.T.); +#363838 = VERTEX_POINT('',#363839); +#363839 = CARTESIAN_POINT('',(148.4625,-126.05,-4.E-02)); +#363840 = LINE('',#363841,#363842); +#363841 = CARTESIAN_POINT('',(148.4625,-125.75,-4.E-02)); +#363842 = VECTOR('',#363843,1.); +#363843 = DIRECTION('',(0.,-1.,0.)); +#363844 = ORIENTED_EDGE('',*,*,#363845,.F.); +#363845 = EDGE_CURVE('',#363846,#363838,#363848,.T.); +#363846 = VERTEX_POINT('',#363847); +#363847 = CARTESIAN_POINT('',(148.4625,-126.05,0.)); +#363848 = LINE('',#363849,#363850); +#363849 = CARTESIAN_POINT('',(148.4625,-126.05,0.)); +#363850 = VECTOR('',#363851,1.); +#363851 = DIRECTION('',(0.,0.,-1.)); +#363852 = ORIENTED_EDGE('',*,*,#363853,.F.); +#363853 = EDGE_CURVE('',#363814,#363846,#363854,.T.); +#363854 = LINE('',#363855,#363856); +#363855 = CARTESIAN_POINT('',(148.4625,-125.75,0.)); +#363856 = VECTOR('',#363857,1.); +#363857 = DIRECTION('',(0.,-1.,0.)); +#363858 = PLANE('',#363859); +#363859 = AXIS2_PLACEMENT_3D('',#363860,#363861,#363862); +#363860 = CARTESIAN_POINT('',(148.4625,-125.75,0.)); +#363861 = DIRECTION('',(-1.,-0.,-0.)); +#363862 = DIRECTION('',(0.,-1.,0.)); +#363863 = ADVANCED_FACE('',(#363864),#363891,.T.); +#363864 = FACE_BOUND('',#363865,.F.); +#363865 = EDGE_LOOP('',(#363866,#363867,#363876,#363884)); +#363866 = ORIENTED_EDGE('',*,*,#363845,.T.); +#363867 = ORIENTED_EDGE('',*,*,#363868,.T.); +#363868 = EDGE_CURVE('',#363838,#363869,#363871,.T.); +#363869 = VERTEX_POINT('',#363870); +#363870 = CARTESIAN_POINT('',(148.3125,-126.2,-4.E-02)); +#363871 = CIRCLE('',#363872,0.150000058649); +#363872 = AXIS2_PLACEMENT_3D('',#363873,#363874,#363875); +#363873 = CARTESIAN_POINT('',(148.31249994135,-126.0499999413,-4.E-02)); +#363874 = DIRECTION('',(0.,0.,-1.)); +#363875 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363876 = ORIENTED_EDGE('',*,*,#363877,.F.); +#363877 = EDGE_CURVE('',#363878,#363869,#363880,.T.); +#363878 = VERTEX_POINT('',#363879); +#363879 = CARTESIAN_POINT('',(148.3125,-126.2,0.)); +#363880 = LINE('',#363881,#363882); +#363881 = CARTESIAN_POINT('',(148.3125,-126.2,0.)); +#363882 = VECTOR('',#363883,1.); +#363883 = DIRECTION('',(0.,0.,-1.)); +#363884 = ORIENTED_EDGE('',*,*,#363885,.F.); +#363885 = EDGE_CURVE('',#363846,#363878,#363886,.T.); +#363886 = CIRCLE('',#363887,0.150000058649); +#363887 = AXIS2_PLACEMENT_3D('',#363888,#363889,#363890); +#363888 = CARTESIAN_POINT('',(148.31249994135,-126.0499999413,0.)); +#363889 = DIRECTION('',(0.,0.,-1.)); +#363890 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363891 = CYLINDRICAL_SURFACE('',#363892,0.150000058649); +#363892 = AXIS2_PLACEMENT_3D('',#363893,#363894,#363895); +#363893 = CARTESIAN_POINT('',(148.31249994135,-126.0499999413,0.)); +#363894 = DIRECTION('',(-0.,-0.,1.)); +#363895 = DIRECTION('',(1.,-3.909955037148E-07,0.)); +#363896 = ADVANCED_FACE('',(#363897),#363922,.F.); +#363897 = FACE_BOUND('',#363898,.F.); +#363898 = EDGE_LOOP('',(#363899,#363900,#363908,#363916)); +#363899 = ORIENTED_EDGE('',*,*,#363877,.T.); +#363900 = ORIENTED_EDGE('',*,*,#363901,.T.); +#363901 = EDGE_CURVE('',#363869,#363902,#363904,.T.); +#363902 = VERTEX_POINT('',#363903); +#363903 = CARTESIAN_POINT('',(147.1375,-126.2,-4.E-02)); +#363904 = LINE('',#363905,#363906); +#363905 = CARTESIAN_POINT('',(148.3125,-126.2,-4.E-02)); +#363906 = VECTOR('',#363907,1.); +#363907 = DIRECTION('',(-1.,0.,0.)); +#363908 = ORIENTED_EDGE('',*,*,#363909,.F.); +#363909 = EDGE_CURVE('',#363910,#363902,#363912,.T.); +#363910 = VERTEX_POINT('',#363911); +#363911 = CARTESIAN_POINT('',(147.1375,-126.2,0.)); +#363912 = LINE('',#363913,#363914); +#363913 = CARTESIAN_POINT('',(147.1375,-126.2,0.)); +#363914 = VECTOR('',#363915,1.); +#363915 = DIRECTION('',(0.,0.,-1.)); +#363916 = ORIENTED_EDGE('',*,*,#363917,.F.); +#363917 = EDGE_CURVE('',#363878,#363910,#363918,.T.); +#363918 = LINE('',#363919,#363920); +#363919 = CARTESIAN_POINT('',(148.3125,-126.2,0.)); +#363920 = VECTOR('',#363921,1.); +#363921 = DIRECTION('',(-1.,0.,0.)); +#363922 = PLANE('',#363923); +#363923 = AXIS2_PLACEMENT_3D('',#363924,#363925,#363926); +#363924 = CARTESIAN_POINT('',(148.3125,-126.2,0.)); +#363925 = DIRECTION('',(0.,1.,0.)); +#363926 = DIRECTION('',(-1.,0.,0.)); +#363927 = ADVANCED_FACE('',(#363928),#363955,.T.); +#363928 = FACE_BOUND('',#363929,.F.); +#363929 = EDGE_LOOP('',(#363930,#363931,#363940,#363948)); +#363930 = ORIENTED_EDGE('',*,*,#363909,.T.); +#363931 = ORIENTED_EDGE('',*,*,#363932,.T.); +#363932 = EDGE_CURVE('',#363902,#363933,#363935,.T.); +#363933 = VERTEX_POINT('',#363934); +#363934 = CARTESIAN_POINT('',(146.9875,-126.05,-4.E-02)); +#363935 = CIRCLE('',#363936,0.150000058649); +#363936 = AXIS2_PLACEMENT_3D('',#363937,#363938,#363939); +#363937 = CARTESIAN_POINT('',(147.13750005864,-126.0499999413,-4.E-02)); +#363938 = DIRECTION('',(0.,0.,-1.)); +#363939 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363940 = ORIENTED_EDGE('',*,*,#363941,.F.); +#363941 = EDGE_CURVE('',#363942,#363933,#363944,.T.); +#363942 = VERTEX_POINT('',#363943); +#363943 = CARTESIAN_POINT('',(146.9875,-126.05,0.)); +#363944 = LINE('',#363945,#363946); +#363945 = CARTESIAN_POINT('',(146.9875,-126.05,0.)); +#363946 = VECTOR('',#363947,1.); +#363947 = DIRECTION('',(0.,0.,-1.)); +#363948 = ORIENTED_EDGE('',*,*,#363949,.F.); +#363949 = EDGE_CURVE('',#363910,#363942,#363950,.T.); +#363950 = CIRCLE('',#363951,0.150000058649); +#363951 = AXIS2_PLACEMENT_3D('',#363952,#363953,#363954); +#363952 = CARTESIAN_POINT('',(147.13750005864,-126.0499999413,0.)); +#363953 = DIRECTION('',(0.,0.,-1.)); +#363954 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363955 = CYLINDRICAL_SURFACE('',#363956,0.150000058649); +#363956 = AXIS2_PLACEMENT_3D('',#363957,#363958,#363959); +#363957 = CARTESIAN_POINT('',(147.13750005864,-126.0499999413,0.)); +#363958 = DIRECTION('',(-0.,-0.,1.)); +#363959 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#363960 = ADVANCED_FACE('',(#363961),#363977,.F.); +#363961 = FACE_BOUND('',#363962,.F.); +#363962 = EDGE_LOOP('',(#363963,#363964,#363970,#363971)); +#363963 = ORIENTED_EDGE('',*,*,#363941,.T.); +#363964 = ORIENTED_EDGE('',*,*,#363965,.T.); +#363965 = EDGE_CURVE('',#363933,#363733,#363966,.T.); +#363966 = LINE('',#363967,#363968); +#363967 = CARTESIAN_POINT('',(146.9875,-126.05,-4.E-02)); +#363968 = VECTOR('',#363969,1.); +#363969 = DIRECTION('',(0.,1.,0.)); +#363970 = ORIENTED_EDGE('',*,*,#363730,.F.); +#363971 = ORIENTED_EDGE('',*,*,#363972,.F.); +#363972 = EDGE_CURVE('',#363942,#363731,#363973,.T.); +#363973 = LINE('',#363974,#363975); +#363974 = CARTESIAN_POINT('',(146.9875,-126.05,0.)); +#363975 = VECTOR('',#363976,1.); +#363976 = DIRECTION('',(0.,1.,0.)); +#363977 = PLANE('',#363978); +#363978 = AXIS2_PLACEMENT_3D('',#363979,#363980,#363981); +#363979 = CARTESIAN_POINT('',(146.9875,-126.05,0.)); +#363980 = DIRECTION('',(1.,-0.,0.)); +#363981 = DIRECTION('',(0.,1.,0.)); +#363982 = ADVANCED_FACE('',(#363983),#363993,.F.); +#363983 = FACE_BOUND('',#363984,.F.); +#363984 = EDGE_LOOP('',(#363985,#363986,#363987,#363988,#363989,#363990, + #363991,#363992)); +#363985 = ORIENTED_EDGE('',*,*,#363757,.T.); +#363986 = ORIENTED_EDGE('',*,*,#363789,.T.); +#363987 = ORIENTED_EDGE('',*,*,#363821,.T.); +#363988 = ORIENTED_EDGE('',*,*,#363853,.T.); +#363989 = ORIENTED_EDGE('',*,*,#363885,.T.); +#363990 = ORIENTED_EDGE('',*,*,#363917,.T.); +#363991 = ORIENTED_EDGE('',*,*,#363949,.T.); +#363992 = ORIENTED_EDGE('',*,*,#363972,.T.); +#363993 = PLANE('',#363994); +#363994 = AXIS2_PLACEMENT_3D('',#363995,#363996,#363997); +#363995 = CARTESIAN_POINT('',(0.,0.,0.)); +#363996 = DIRECTION('',(-0.,-0.,-1.)); +#363997 = DIRECTION('',(-1.,0.,0.)); +#363998 = ADVANCED_FACE('',(#363999),#364009,.T.); +#363999 = FACE_BOUND('',#364000,.T.); +#364000 = EDGE_LOOP('',(#364001,#364002,#364003,#364004,#364005,#364006, + #364007,#364008)); +#364001 = ORIENTED_EDGE('',*,*,#363740,.T.); +#364002 = ORIENTED_EDGE('',*,*,#363773,.T.); +#364003 = ORIENTED_EDGE('',*,*,#363804,.T.); +#364004 = ORIENTED_EDGE('',*,*,#363837,.T.); +#364005 = ORIENTED_EDGE('',*,*,#363868,.T.); +#364006 = ORIENTED_EDGE('',*,*,#363901,.T.); +#364007 = ORIENTED_EDGE('',*,*,#363932,.T.); +#364008 = ORIENTED_EDGE('',*,*,#363965,.T.); +#364009 = PLANE('',#364010); +#364010 = AXIS2_PLACEMENT_3D('',#364011,#364012,#364013); +#364011 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#364012 = DIRECTION('',(-0.,-0.,-1.)); +#364013 = DIRECTION('',(-1.,0.,0.)); +#364014 = MANIFOLD_SOLID_BREP('',#364015); +#364015 = CLOSED_SHELL('',(#364016,#364058,#364089,#364122,#364153, + #364186,#364217,#364250,#364272,#364288)); +#364016 = ADVANCED_FACE('',(#364017),#364053,.T.); +#364017 = FACE_BOUND('',#364018,.F.); +#364018 = EDGE_LOOP('',(#364019,#364029,#364038,#364046)); +#364019 = ORIENTED_EDGE('',*,*,#364020,.T.); +#364020 = EDGE_CURVE('',#364021,#364023,#364025,.T.); +#364021 = VERTEX_POINT('',#364022); +#364022 = CARTESIAN_POINT('',(147.8875,-117.8,0.)); +#364023 = VERTEX_POINT('',#364024); +#364024 = CARTESIAN_POINT('',(147.8875,-117.8,-4.E-02)); +#364025 = LINE('',#364026,#364027); +#364026 = CARTESIAN_POINT('',(147.8875,-117.8,0.)); +#364027 = VECTOR('',#364028,1.); +#364028 = DIRECTION('',(0.,0.,-1.)); +#364029 = ORIENTED_EDGE('',*,*,#364030,.T.); +#364030 = EDGE_CURVE('',#364023,#364031,#364033,.T.); +#364031 = VERTEX_POINT('',#364032); +#364032 = CARTESIAN_POINT('',(148.0375,-117.65,-4.E-02)); +#364033 = CIRCLE('',#364034,0.150000058649); +#364034 = AXIS2_PLACEMENT_3D('',#364035,#364036,#364037); +#364035 = CARTESIAN_POINT('',(148.03750005864,-117.8000000586,-4.E-02)); +#364036 = DIRECTION('',(0.,0.,-1.)); +#364037 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364038 = ORIENTED_EDGE('',*,*,#364039,.F.); +#364039 = EDGE_CURVE('',#364040,#364031,#364042,.T.); +#364040 = VERTEX_POINT('',#364041); +#364041 = CARTESIAN_POINT('',(148.0375,-117.65,0.)); +#364042 = LINE('',#364043,#364044); +#364043 = CARTESIAN_POINT('',(148.0375,-117.65,0.)); +#364044 = VECTOR('',#364045,1.); +#364045 = DIRECTION('',(0.,0.,-1.)); +#364046 = ORIENTED_EDGE('',*,*,#364047,.F.); +#364047 = EDGE_CURVE('',#364021,#364040,#364048,.T.); +#364048 = CIRCLE('',#364049,0.150000058649); +#364049 = AXIS2_PLACEMENT_3D('',#364050,#364051,#364052); +#364050 = CARTESIAN_POINT('',(148.03750005864,-117.8000000586,0.)); +#364051 = DIRECTION('',(0.,0.,-1.)); +#364052 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364053 = CYLINDRICAL_SURFACE('',#364054,0.150000058649); +#364054 = AXIS2_PLACEMENT_3D('',#364055,#364056,#364057); +#364055 = CARTESIAN_POINT('',(148.03750005864,-117.8000000586,0.)); +#364056 = DIRECTION('',(-0.,-0.,1.)); +#364057 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364058 = ADVANCED_FACE('',(#364059),#364084,.F.); +#364059 = FACE_BOUND('',#364060,.F.); +#364060 = EDGE_LOOP('',(#364061,#364062,#364070,#364078)); +#364061 = ORIENTED_EDGE('',*,*,#364039,.T.); +#364062 = ORIENTED_EDGE('',*,*,#364063,.T.); +#364063 = EDGE_CURVE('',#364031,#364064,#364066,.T.); +#364064 = VERTEX_POINT('',#364065); +#364065 = CARTESIAN_POINT('',(149.2125,-117.65,-4.E-02)); +#364066 = LINE('',#364067,#364068); +#364067 = CARTESIAN_POINT('',(148.0375,-117.65,-4.E-02)); +#364068 = VECTOR('',#364069,1.); +#364069 = DIRECTION('',(1.,0.,0.)); +#364070 = ORIENTED_EDGE('',*,*,#364071,.F.); +#364071 = EDGE_CURVE('',#364072,#364064,#364074,.T.); +#364072 = VERTEX_POINT('',#364073); +#364073 = CARTESIAN_POINT('',(149.2125,-117.65,0.)); +#364074 = LINE('',#364075,#364076); +#364075 = CARTESIAN_POINT('',(149.2125,-117.65,0.)); +#364076 = VECTOR('',#364077,1.); +#364077 = DIRECTION('',(0.,0.,-1.)); +#364078 = ORIENTED_EDGE('',*,*,#364079,.F.); +#364079 = EDGE_CURVE('',#364040,#364072,#364080,.T.); +#364080 = LINE('',#364081,#364082); +#364081 = CARTESIAN_POINT('',(148.0375,-117.65,0.)); +#364082 = VECTOR('',#364083,1.); +#364083 = DIRECTION('',(1.,0.,0.)); +#364084 = PLANE('',#364085); +#364085 = AXIS2_PLACEMENT_3D('',#364086,#364087,#364088); +#364086 = CARTESIAN_POINT('',(148.0375,-117.65,0.)); +#364087 = DIRECTION('',(0.,-1.,0.)); +#364088 = DIRECTION('',(1.,0.,0.)); +#364089 = ADVANCED_FACE('',(#364090),#364117,.T.); +#364090 = FACE_BOUND('',#364091,.F.); +#364091 = EDGE_LOOP('',(#364092,#364093,#364102,#364110)); +#364092 = ORIENTED_EDGE('',*,*,#364071,.T.); +#364093 = ORIENTED_EDGE('',*,*,#364094,.T.); +#364094 = EDGE_CURVE('',#364064,#364095,#364097,.T.); +#364095 = VERTEX_POINT('',#364096); +#364096 = CARTESIAN_POINT('',(149.3625,-117.8,-4.E-02)); +#364097 = CIRCLE('',#364098,0.150000058649); +#364098 = AXIS2_PLACEMENT_3D('',#364099,#364100,#364101); +#364099 = CARTESIAN_POINT('',(149.21249994135,-117.8000000586,-4.E-02)); +#364100 = DIRECTION('',(0.,0.,-1.)); +#364101 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364102 = ORIENTED_EDGE('',*,*,#364103,.F.); +#364103 = EDGE_CURVE('',#364104,#364095,#364106,.T.); +#364104 = VERTEX_POINT('',#364105); +#364105 = CARTESIAN_POINT('',(149.3625,-117.8,0.)); +#364106 = LINE('',#364107,#364108); +#364107 = CARTESIAN_POINT('',(149.3625,-117.8,0.)); +#364108 = VECTOR('',#364109,1.); +#364109 = DIRECTION('',(0.,0.,-1.)); +#364110 = ORIENTED_EDGE('',*,*,#364111,.F.); +#364111 = EDGE_CURVE('',#364072,#364104,#364112,.T.); +#364112 = CIRCLE('',#364113,0.150000058649); +#364113 = AXIS2_PLACEMENT_3D('',#364114,#364115,#364116); +#364114 = CARTESIAN_POINT('',(149.21249994135,-117.8000000586,0.)); +#364115 = DIRECTION('',(0.,0.,-1.)); +#364116 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364117 = CYLINDRICAL_SURFACE('',#364118,0.150000058649); +#364118 = AXIS2_PLACEMENT_3D('',#364119,#364120,#364121); +#364119 = CARTESIAN_POINT('',(149.21249994135,-117.8000000586,0.)); +#364120 = DIRECTION('',(-0.,-0.,1.)); +#364121 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364122 = ADVANCED_FACE('',(#364123),#364148,.F.); +#364123 = FACE_BOUND('',#364124,.F.); +#364124 = EDGE_LOOP('',(#364125,#364126,#364134,#364142)); +#364125 = ORIENTED_EDGE('',*,*,#364103,.T.); +#364126 = ORIENTED_EDGE('',*,*,#364127,.T.); +#364127 = EDGE_CURVE('',#364095,#364128,#364130,.T.); +#364128 = VERTEX_POINT('',#364129); +#364129 = CARTESIAN_POINT('',(149.3625,-118.1,-4.E-02)); +#364130 = LINE('',#364131,#364132); +#364131 = CARTESIAN_POINT('',(149.3625,-117.8,-4.E-02)); +#364132 = VECTOR('',#364133,1.); +#364133 = DIRECTION('',(0.,-1.,0.)); +#364134 = ORIENTED_EDGE('',*,*,#364135,.F.); +#364135 = EDGE_CURVE('',#364136,#364128,#364138,.T.); +#364136 = VERTEX_POINT('',#364137); +#364137 = CARTESIAN_POINT('',(149.3625,-118.1,0.)); +#364138 = LINE('',#364139,#364140); +#364139 = CARTESIAN_POINT('',(149.3625,-118.1,0.)); +#364140 = VECTOR('',#364141,1.); +#364141 = DIRECTION('',(0.,0.,-1.)); +#364142 = ORIENTED_EDGE('',*,*,#364143,.F.); +#364143 = EDGE_CURVE('',#364104,#364136,#364144,.T.); +#364144 = LINE('',#364145,#364146); +#364145 = CARTESIAN_POINT('',(149.3625,-117.8,0.)); +#364146 = VECTOR('',#364147,1.); +#364147 = DIRECTION('',(0.,-1.,0.)); +#364148 = PLANE('',#364149); +#364149 = AXIS2_PLACEMENT_3D('',#364150,#364151,#364152); +#364150 = CARTESIAN_POINT('',(149.3625,-117.8,0.)); +#364151 = DIRECTION('',(-1.,-0.,-0.)); +#364152 = DIRECTION('',(0.,-1.,0.)); +#364153 = ADVANCED_FACE('',(#364154),#364181,.T.); +#364154 = FACE_BOUND('',#364155,.F.); +#364155 = EDGE_LOOP('',(#364156,#364157,#364166,#364174)); +#364156 = ORIENTED_EDGE('',*,*,#364135,.T.); +#364157 = ORIENTED_EDGE('',*,*,#364158,.T.); +#364158 = EDGE_CURVE('',#364128,#364159,#364161,.T.); +#364159 = VERTEX_POINT('',#364160); +#364160 = CARTESIAN_POINT('',(149.2125,-118.25,-4.E-02)); +#364161 = CIRCLE('',#364162,0.150000058649); +#364162 = AXIS2_PLACEMENT_3D('',#364163,#364164,#364165); +#364163 = CARTESIAN_POINT('',(149.21249994135,-118.0999999413,-4.E-02)); +#364164 = DIRECTION('',(0.,0.,-1.)); +#364165 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364166 = ORIENTED_EDGE('',*,*,#364167,.F.); +#364167 = EDGE_CURVE('',#364168,#364159,#364170,.T.); +#364168 = VERTEX_POINT('',#364169); +#364169 = CARTESIAN_POINT('',(149.2125,-118.25,0.)); +#364170 = LINE('',#364171,#364172); +#364171 = CARTESIAN_POINT('',(149.2125,-118.25,0.)); +#364172 = VECTOR('',#364173,1.); +#364173 = DIRECTION('',(0.,0.,-1.)); +#364174 = ORIENTED_EDGE('',*,*,#364175,.F.); +#364175 = EDGE_CURVE('',#364136,#364168,#364176,.T.); +#364176 = CIRCLE('',#364177,0.150000058649); +#364177 = AXIS2_PLACEMENT_3D('',#364178,#364179,#364180); +#364178 = CARTESIAN_POINT('',(149.21249994135,-118.0999999413,0.)); +#364179 = DIRECTION('',(0.,0.,-1.)); +#364180 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364181 = CYLINDRICAL_SURFACE('',#364182,0.150000058649); +#364182 = AXIS2_PLACEMENT_3D('',#364183,#364184,#364185); +#364183 = CARTESIAN_POINT('',(149.21249994135,-118.0999999413,0.)); +#364184 = DIRECTION('',(-0.,-0.,1.)); +#364185 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364186 = ADVANCED_FACE('',(#364187),#364212,.F.); +#364187 = FACE_BOUND('',#364188,.F.); +#364188 = EDGE_LOOP('',(#364189,#364190,#364198,#364206)); +#364189 = ORIENTED_EDGE('',*,*,#364167,.T.); +#364190 = ORIENTED_EDGE('',*,*,#364191,.T.); +#364191 = EDGE_CURVE('',#364159,#364192,#364194,.T.); +#364192 = VERTEX_POINT('',#364193); +#364193 = CARTESIAN_POINT('',(148.0375,-118.25,-4.E-02)); +#364194 = LINE('',#364195,#364196); +#364195 = CARTESIAN_POINT('',(149.2125,-118.25,-4.E-02)); +#364196 = VECTOR('',#364197,1.); +#364197 = DIRECTION('',(-1.,0.,0.)); +#364198 = ORIENTED_EDGE('',*,*,#364199,.F.); +#364199 = EDGE_CURVE('',#364200,#364192,#364202,.T.); +#364200 = VERTEX_POINT('',#364201); +#364201 = CARTESIAN_POINT('',(148.0375,-118.25,0.)); +#364202 = LINE('',#364203,#364204); +#364203 = CARTESIAN_POINT('',(148.0375,-118.25,0.)); +#364204 = VECTOR('',#364205,1.); +#364205 = DIRECTION('',(0.,0.,-1.)); +#364206 = ORIENTED_EDGE('',*,*,#364207,.F.); +#364207 = EDGE_CURVE('',#364168,#364200,#364208,.T.); +#364208 = LINE('',#364209,#364210); +#364209 = CARTESIAN_POINT('',(149.2125,-118.25,0.)); +#364210 = VECTOR('',#364211,1.); +#364211 = DIRECTION('',(-1.,0.,0.)); +#364212 = PLANE('',#364213); +#364213 = AXIS2_PLACEMENT_3D('',#364214,#364215,#364216); +#364214 = CARTESIAN_POINT('',(149.2125,-118.25,0.)); +#364215 = DIRECTION('',(0.,1.,0.)); +#364216 = DIRECTION('',(-1.,0.,0.)); +#364217 = ADVANCED_FACE('',(#364218),#364245,.T.); +#364218 = FACE_BOUND('',#364219,.F.); +#364219 = EDGE_LOOP('',(#364220,#364221,#364230,#364238)); +#364220 = ORIENTED_EDGE('',*,*,#364199,.T.); +#364221 = ORIENTED_EDGE('',*,*,#364222,.T.); +#364222 = EDGE_CURVE('',#364192,#364223,#364225,.T.); +#364223 = VERTEX_POINT('',#364224); +#364224 = CARTESIAN_POINT('',(147.8875,-118.1,-4.E-02)); +#364225 = CIRCLE('',#364226,0.150000058649); +#364226 = AXIS2_PLACEMENT_3D('',#364227,#364228,#364229); +#364227 = CARTESIAN_POINT('',(148.03750005864,-118.0999999413,-4.E-02)); +#364228 = DIRECTION('',(0.,0.,-1.)); +#364229 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364230 = ORIENTED_EDGE('',*,*,#364231,.F.); +#364231 = EDGE_CURVE('',#364232,#364223,#364234,.T.); +#364232 = VERTEX_POINT('',#364233); +#364233 = CARTESIAN_POINT('',(147.8875,-118.1,0.)); +#364234 = LINE('',#364235,#364236); +#364235 = CARTESIAN_POINT('',(147.8875,-118.1,0.)); +#364236 = VECTOR('',#364237,1.); +#364237 = DIRECTION('',(0.,0.,-1.)); +#364238 = ORIENTED_EDGE('',*,*,#364239,.F.); +#364239 = EDGE_CURVE('',#364200,#364232,#364240,.T.); +#364240 = CIRCLE('',#364241,0.150000058649); +#364241 = AXIS2_PLACEMENT_3D('',#364242,#364243,#364244); +#364242 = CARTESIAN_POINT('',(148.03750005864,-118.0999999413,0.)); +#364243 = DIRECTION('',(0.,0.,-1.)); +#364244 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364245 = CYLINDRICAL_SURFACE('',#364246,0.150000058649); +#364246 = AXIS2_PLACEMENT_3D('',#364247,#364248,#364249); +#364247 = CARTESIAN_POINT('',(148.03750005864,-118.0999999413,0.)); +#364248 = DIRECTION('',(-0.,-0.,1.)); +#364249 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364250 = ADVANCED_FACE('',(#364251),#364267,.F.); +#364251 = FACE_BOUND('',#364252,.F.); +#364252 = EDGE_LOOP('',(#364253,#364254,#364260,#364261)); +#364253 = ORIENTED_EDGE('',*,*,#364231,.T.); +#364254 = ORIENTED_EDGE('',*,*,#364255,.T.); +#364255 = EDGE_CURVE('',#364223,#364023,#364256,.T.); +#364256 = LINE('',#364257,#364258); +#364257 = CARTESIAN_POINT('',(147.8875,-118.1,-4.E-02)); +#364258 = VECTOR('',#364259,1.); +#364259 = DIRECTION('',(0.,1.,0.)); +#364260 = ORIENTED_EDGE('',*,*,#364020,.F.); +#364261 = ORIENTED_EDGE('',*,*,#364262,.F.); +#364262 = EDGE_CURVE('',#364232,#364021,#364263,.T.); +#364263 = LINE('',#364264,#364265); +#364264 = CARTESIAN_POINT('',(147.8875,-118.1,0.)); +#364265 = VECTOR('',#364266,1.); +#364266 = DIRECTION('',(0.,1.,0.)); +#364267 = PLANE('',#364268); +#364268 = AXIS2_PLACEMENT_3D('',#364269,#364270,#364271); +#364269 = CARTESIAN_POINT('',(147.8875,-118.1,0.)); +#364270 = DIRECTION('',(1.,-0.,0.)); +#364271 = DIRECTION('',(0.,1.,0.)); +#364272 = ADVANCED_FACE('',(#364273),#364283,.F.); +#364273 = FACE_BOUND('',#364274,.F.); +#364274 = EDGE_LOOP('',(#364275,#364276,#364277,#364278,#364279,#364280, + #364281,#364282)); +#364275 = ORIENTED_EDGE('',*,*,#364047,.T.); +#364276 = ORIENTED_EDGE('',*,*,#364079,.T.); +#364277 = ORIENTED_EDGE('',*,*,#364111,.T.); +#364278 = ORIENTED_EDGE('',*,*,#364143,.T.); +#364279 = ORIENTED_EDGE('',*,*,#364175,.T.); +#364280 = ORIENTED_EDGE('',*,*,#364207,.T.); +#364281 = ORIENTED_EDGE('',*,*,#364239,.T.); +#364282 = ORIENTED_EDGE('',*,*,#364262,.T.); +#364283 = PLANE('',#364284); +#364284 = AXIS2_PLACEMENT_3D('',#364285,#364286,#364287); +#364285 = CARTESIAN_POINT('',(0.,0.,0.)); +#364286 = DIRECTION('',(-0.,-0.,-1.)); +#364287 = DIRECTION('',(-1.,0.,0.)); +#364288 = ADVANCED_FACE('',(#364289),#364299,.T.); +#364289 = FACE_BOUND('',#364290,.T.); +#364290 = EDGE_LOOP('',(#364291,#364292,#364293,#364294,#364295,#364296, + #364297,#364298)); +#364291 = ORIENTED_EDGE('',*,*,#364030,.T.); +#364292 = ORIENTED_EDGE('',*,*,#364063,.T.); +#364293 = ORIENTED_EDGE('',*,*,#364094,.T.); +#364294 = ORIENTED_EDGE('',*,*,#364127,.T.); +#364295 = ORIENTED_EDGE('',*,*,#364158,.T.); +#364296 = ORIENTED_EDGE('',*,*,#364191,.T.); +#364297 = ORIENTED_EDGE('',*,*,#364222,.T.); +#364298 = ORIENTED_EDGE('',*,*,#364255,.T.); +#364299 = PLANE('',#364300); +#364300 = AXIS2_PLACEMENT_3D('',#364301,#364302,#364303); +#364301 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#364302 = DIRECTION('',(-0.,-0.,-1.)); +#364303 = DIRECTION('',(-1.,0.,0.)); +#364304 = MANIFOLD_SOLID_BREP('',#364305); +#364305 = CLOSED_SHELL('',(#364306,#364348,#364379,#364412,#364443, + #364476,#364507,#364540,#364562,#364578)); +#364306 = ADVANCED_FACE('',(#364307),#364343,.T.); +#364307 = FACE_BOUND('',#364308,.F.); +#364308 = EDGE_LOOP('',(#364309,#364319,#364328,#364336)); +#364309 = ORIENTED_EDGE('',*,*,#364310,.T.); +#364310 = EDGE_CURVE('',#364311,#364313,#364315,.T.); +#364311 = VERTEX_POINT('',#364312); +#364312 = CARTESIAN_POINT('',(147.23,-114.315,0.)); +#364313 = VERTEX_POINT('',#364314); +#364314 = CARTESIAN_POINT('',(147.23,-114.315,-4.E-02)); +#364315 = LINE('',#364316,#364317); +#364316 = CARTESIAN_POINT('',(147.23,-114.315,0.)); +#364317 = VECTOR('',#364318,1.); +#364318 = DIRECTION('',(0.,0.,-1.)); +#364319 = ORIENTED_EDGE('',*,*,#364320,.T.); +#364320 = EDGE_CURVE('',#364313,#364321,#364323,.T.); +#364321 = VERTEX_POINT('',#364322); +#364322 = CARTESIAN_POINT('',(147.365,-114.18,-4.E-02)); +#364323 = CIRCLE('',#364324,0.135001418495); +#364324 = AXIS2_PLACEMENT_3D('',#364325,#364326,#364327); +#364325 = CARTESIAN_POINT('',(147.36500141848,-114.3150014184,-4.E-02)); +#364326 = DIRECTION('',(0.,0.,-1.)); +#364327 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#364328 = ORIENTED_EDGE('',*,*,#364329,.F.); +#364329 = EDGE_CURVE('',#364330,#364321,#364332,.T.); +#364330 = VERTEX_POINT('',#364331); +#364331 = CARTESIAN_POINT('',(147.365,-114.18,0.)); +#364332 = LINE('',#364333,#364334); +#364333 = CARTESIAN_POINT('',(147.365,-114.18,0.)); +#364334 = VECTOR('',#364335,1.); +#364335 = DIRECTION('',(0.,0.,-1.)); +#364336 = ORIENTED_EDGE('',*,*,#364337,.F.); +#364337 = EDGE_CURVE('',#364311,#364330,#364338,.T.); +#364338 = CIRCLE('',#364339,0.135001418495); +#364339 = AXIS2_PLACEMENT_3D('',#364340,#364341,#364342); +#364340 = CARTESIAN_POINT('',(147.36500141848,-114.3150014184,0.)); +#364341 = DIRECTION('',(0.,0.,-1.)); +#364342 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#364343 = CYLINDRICAL_SURFACE('',#364344,0.135001418495); +#364344 = AXIS2_PLACEMENT_3D('',#364345,#364346,#364347); +#364345 = CARTESIAN_POINT('',(147.36500141848,-114.3150014184,0.)); +#364346 = DIRECTION('',(-0.,-0.,1.)); +#364347 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#364348 = ADVANCED_FACE('',(#364349),#364374,.F.); +#364349 = FACE_BOUND('',#364350,.F.); +#364350 = EDGE_LOOP('',(#364351,#364352,#364360,#364368)); +#364351 = ORIENTED_EDGE('',*,*,#364329,.T.); +#364352 = ORIENTED_EDGE('',*,*,#364353,.T.); +#364353 = EDGE_CURVE('',#364321,#364354,#364356,.T.); +#364354 = VERTEX_POINT('',#364355); +#364355 = CARTESIAN_POINT('',(147.635,-114.18,-4.E-02)); +#364356 = LINE('',#364357,#364358); +#364357 = CARTESIAN_POINT('',(147.365,-114.18,-4.E-02)); +#364358 = VECTOR('',#364359,1.); +#364359 = DIRECTION('',(1.,0.,0.)); +#364360 = ORIENTED_EDGE('',*,*,#364361,.F.); +#364361 = EDGE_CURVE('',#364362,#364354,#364364,.T.); +#364362 = VERTEX_POINT('',#364363); +#364363 = CARTESIAN_POINT('',(147.635,-114.18,0.)); +#364364 = LINE('',#364365,#364366); +#364365 = CARTESIAN_POINT('',(147.635,-114.18,0.)); +#364366 = VECTOR('',#364367,1.); +#364367 = DIRECTION('',(0.,0.,-1.)); +#364368 = ORIENTED_EDGE('',*,*,#364369,.F.); +#364369 = EDGE_CURVE('',#364330,#364362,#364370,.T.); +#364370 = LINE('',#364371,#364372); +#364371 = CARTESIAN_POINT('',(147.365,-114.18,0.)); +#364372 = VECTOR('',#364373,1.); +#364373 = DIRECTION('',(1.,0.,0.)); +#364374 = PLANE('',#364375); +#364375 = AXIS2_PLACEMENT_3D('',#364376,#364377,#364378); +#364376 = CARTESIAN_POINT('',(147.365,-114.18,0.)); +#364377 = DIRECTION('',(0.,-1.,0.)); +#364378 = DIRECTION('',(1.,0.,0.)); +#364379 = ADVANCED_FACE('',(#364380),#364407,.T.); +#364380 = FACE_BOUND('',#364381,.F.); +#364381 = EDGE_LOOP('',(#364382,#364383,#364392,#364400)); +#364382 = ORIENTED_EDGE('',*,*,#364361,.T.); +#364383 = ORIENTED_EDGE('',*,*,#364384,.T.); +#364384 = EDGE_CURVE('',#364354,#364385,#364387,.T.); +#364385 = VERTEX_POINT('',#364386); +#364386 = CARTESIAN_POINT('',(147.77,-114.315,-4.E-02)); +#364387 = CIRCLE('',#364388,0.135001418495); +#364388 = AXIS2_PLACEMENT_3D('',#364389,#364390,#364391); +#364389 = CARTESIAN_POINT('',(147.63499858151,-114.3150014184,-4.E-02)); +#364390 = DIRECTION('',(0.,0.,-1.)); +#364391 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#364392 = ORIENTED_EDGE('',*,*,#364393,.F.); +#364393 = EDGE_CURVE('',#364394,#364385,#364396,.T.); +#364394 = VERTEX_POINT('',#364395); +#364395 = CARTESIAN_POINT('',(147.77,-114.315,0.)); +#364396 = LINE('',#364397,#364398); +#364397 = CARTESIAN_POINT('',(147.77,-114.315,0.)); +#364398 = VECTOR('',#364399,1.); +#364399 = DIRECTION('',(0.,0.,-1.)); +#364400 = ORIENTED_EDGE('',*,*,#364401,.F.); +#364401 = EDGE_CURVE('',#364362,#364394,#364402,.T.); +#364402 = CIRCLE('',#364403,0.135001418495); +#364403 = AXIS2_PLACEMENT_3D('',#364404,#364405,#364406); +#364404 = CARTESIAN_POINT('',(147.63499858151,-114.3150014184,0.)); +#364405 = DIRECTION('',(0.,0.,-1.)); +#364406 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#364407 = CYLINDRICAL_SURFACE('',#364408,0.135001418495); +#364408 = AXIS2_PLACEMENT_3D('',#364409,#364410,#364411); +#364409 = CARTESIAN_POINT('',(147.63499858151,-114.3150014184,0.)); +#364410 = DIRECTION('',(-0.,-0.,1.)); +#364411 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#364412 = ADVANCED_FACE('',(#364413),#364438,.F.); +#364413 = FACE_BOUND('',#364414,.F.); +#364414 = EDGE_LOOP('',(#364415,#364416,#364424,#364432)); +#364415 = ORIENTED_EDGE('',*,*,#364393,.T.); +#364416 = ORIENTED_EDGE('',*,*,#364417,.T.); +#364417 = EDGE_CURVE('',#364385,#364418,#364420,.T.); +#364418 = VERTEX_POINT('',#364419); +#364419 = CARTESIAN_POINT('',(147.77,-114.685,-4.E-02)); +#364420 = LINE('',#364421,#364422); +#364421 = CARTESIAN_POINT('',(147.77,-114.315,-4.E-02)); +#364422 = VECTOR('',#364423,1.); +#364423 = DIRECTION('',(0.,-1.,0.)); +#364424 = ORIENTED_EDGE('',*,*,#364425,.F.); +#364425 = EDGE_CURVE('',#364426,#364418,#364428,.T.); +#364426 = VERTEX_POINT('',#364427); +#364427 = CARTESIAN_POINT('',(147.77,-114.685,0.)); +#364428 = LINE('',#364429,#364430); +#364429 = CARTESIAN_POINT('',(147.77,-114.685,0.)); +#364430 = VECTOR('',#364431,1.); +#364431 = DIRECTION('',(0.,0.,-1.)); +#364432 = ORIENTED_EDGE('',*,*,#364433,.F.); +#364433 = EDGE_CURVE('',#364394,#364426,#364434,.T.); +#364434 = LINE('',#364435,#364436); +#364435 = CARTESIAN_POINT('',(147.77,-114.315,0.)); +#364436 = VECTOR('',#364437,1.); +#364437 = DIRECTION('',(0.,-1.,0.)); +#364438 = PLANE('',#364439); +#364439 = AXIS2_PLACEMENT_3D('',#364440,#364441,#364442); +#364440 = CARTESIAN_POINT('',(147.77,-114.315,0.)); +#364441 = DIRECTION('',(-1.,-0.,-0.)); +#364442 = DIRECTION('',(0.,-1.,0.)); +#364443 = ADVANCED_FACE('',(#364444),#364471,.T.); +#364444 = FACE_BOUND('',#364445,.F.); +#364445 = EDGE_LOOP('',(#364446,#364447,#364456,#364464)); +#364446 = ORIENTED_EDGE('',*,*,#364425,.T.); +#364447 = ORIENTED_EDGE('',*,*,#364448,.T.); +#364448 = EDGE_CURVE('',#364418,#364449,#364451,.T.); +#364449 = VERTEX_POINT('',#364450); +#364450 = CARTESIAN_POINT('',(147.635,-114.82,-4.E-02)); +#364451 = CIRCLE('',#364452,0.135001418495); +#364452 = AXIS2_PLACEMENT_3D('',#364453,#364454,#364455); +#364453 = CARTESIAN_POINT('',(147.63499858151,-114.6849985815,-4.E-02)); +#364454 = DIRECTION('',(0.,0.,-1.)); +#364455 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#364456 = ORIENTED_EDGE('',*,*,#364457,.F.); +#364457 = EDGE_CURVE('',#364458,#364449,#364460,.T.); +#364458 = VERTEX_POINT('',#364459); +#364459 = CARTESIAN_POINT('',(147.635,-114.82,0.)); +#364460 = LINE('',#364461,#364462); +#364461 = CARTESIAN_POINT('',(147.635,-114.82,0.)); +#364462 = VECTOR('',#364463,1.); +#364463 = DIRECTION('',(0.,0.,-1.)); +#364464 = ORIENTED_EDGE('',*,*,#364465,.F.); +#364465 = EDGE_CURVE('',#364426,#364458,#364466,.T.); +#364466 = CIRCLE('',#364467,0.135001418495); +#364467 = AXIS2_PLACEMENT_3D('',#364468,#364469,#364470); +#364468 = CARTESIAN_POINT('',(147.63499858151,-114.6849985815,0.)); +#364469 = DIRECTION('',(0.,0.,-1.)); +#364470 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#364471 = CYLINDRICAL_SURFACE('',#364472,0.135001418495); +#364472 = AXIS2_PLACEMENT_3D('',#364473,#364474,#364475); +#364473 = CARTESIAN_POINT('',(147.63499858151,-114.6849985815,0.)); +#364474 = DIRECTION('',(-0.,-0.,1.)); +#364475 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#364476 = ADVANCED_FACE('',(#364477),#364502,.F.); +#364477 = FACE_BOUND('',#364478,.F.); +#364478 = EDGE_LOOP('',(#364479,#364480,#364488,#364496)); +#364479 = ORIENTED_EDGE('',*,*,#364457,.T.); +#364480 = ORIENTED_EDGE('',*,*,#364481,.T.); +#364481 = EDGE_CURVE('',#364449,#364482,#364484,.T.); +#364482 = VERTEX_POINT('',#364483); +#364483 = CARTESIAN_POINT('',(147.365,-114.82,-4.E-02)); +#364484 = LINE('',#364485,#364486); +#364485 = CARTESIAN_POINT('',(147.635,-114.82,-4.E-02)); +#364486 = VECTOR('',#364487,1.); +#364487 = DIRECTION('',(-1.,0.,0.)); +#364488 = ORIENTED_EDGE('',*,*,#364489,.F.); +#364489 = EDGE_CURVE('',#364490,#364482,#364492,.T.); +#364490 = VERTEX_POINT('',#364491); +#364491 = CARTESIAN_POINT('',(147.365,-114.82,0.)); +#364492 = LINE('',#364493,#364494); +#364493 = CARTESIAN_POINT('',(147.365,-114.82,0.)); +#364494 = VECTOR('',#364495,1.); +#364495 = DIRECTION('',(0.,0.,-1.)); +#364496 = ORIENTED_EDGE('',*,*,#364497,.F.); +#364497 = EDGE_CURVE('',#364458,#364490,#364498,.T.); +#364498 = LINE('',#364499,#364500); +#364499 = CARTESIAN_POINT('',(147.635,-114.82,0.)); +#364500 = VECTOR('',#364501,1.); +#364501 = DIRECTION('',(-1.,0.,0.)); +#364502 = PLANE('',#364503); +#364503 = AXIS2_PLACEMENT_3D('',#364504,#364505,#364506); +#364504 = CARTESIAN_POINT('',(147.635,-114.82,0.)); +#364505 = DIRECTION('',(0.,1.,0.)); +#364506 = DIRECTION('',(-1.,0.,0.)); +#364507 = ADVANCED_FACE('',(#364508),#364535,.T.); +#364508 = FACE_BOUND('',#364509,.F.); +#364509 = EDGE_LOOP('',(#364510,#364511,#364520,#364528)); +#364510 = ORIENTED_EDGE('',*,*,#364489,.T.); +#364511 = ORIENTED_EDGE('',*,*,#364512,.T.); +#364512 = EDGE_CURVE('',#364482,#364513,#364515,.T.); +#364513 = VERTEX_POINT('',#364514); +#364514 = CARTESIAN_POINT('',(147.23,-114.685,-4.E-02)); +#364515 = CIRCLE('',#364516,0.135001418495); +#364516 = AXIS2_PLACEMENT_3D('',#364517,#364518,#364519); +#364517 = CARTESIAN_POINT('',(147.36500141848,-114.6849985815,-4.E-02)); +#364518 = DIRECTION('',(0.,0.,-1.)); +#364519 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#364520 = ORIENTED_EDGE('',*,*,#364521,.F.); +#364521 = EDGE_CURVE('',#364522,#364513,#364524,.T.); +#364522 = VERTEX_POINT('',#364523); +#364523 = CARTESIAN_POINT('',(147.23,-114.685,0.)); +#364524 = LINE('',#364525,#364526); +#364525 = CARTESIAN_POINT('',(147.23,-114.685,0.)); +#364526 = VECTOR('',#364527,1.); +#364527 = DIRECTION('',(0.,0.,-1.)); +#364528 = ORIENTED_EDGE('',*,*,#364529,.F.); +#364529 = EDGE_CURVE('',#364490,#364522,#364530,.T.); +#364530 = CIRCLE('',#364531,0.135001418495); +#364531 = AXIS2_PLACEMENT_3D('',#364532,#364533,#364534); +#364532 = CARTESIAN_POINT('',(147.36500141848,-114.6849985815,0.)); +#364533 = DIRECTION('',(0.,0.,-1.)); +#364534 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#364535 = CYLINDRICAL_SURFACE('',#364536,0.135001418495); +#364536 = AXIS2_PLACEMENT_3D('',#364537,#364538,#364539); +#364537 = CARTESIAN_POINT('',(147.36500141848,-114.6849985815,0.)); +#364538 = DIRECTION('',(-0.,-0.,1.)); +#364539 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#364540 = ADVANCED_FACE('',(#364541),#364557,.F.); +#364541 = FACE_BOUND('',#364542,.F.); +#364542 = EDGE_LOOP('',(#364543,#364544,#364550,#364551)); +#364543 = ORIENTED_EDGE('',*,*,#364521,.T.); +#364544 = ORIENTED_EDGE('',*,*,#364545,.T.); +#364545 = EDGE_CURVE('',#364513,#364313,#364546,.T.); +#364546 = LINE('',#364547,#364548); +#364547 = CARTESIAN_POINT('',(147.23,-114.685,-4.E-02)); +#364548 = VECTOR('',#364549,1.); +#364549 = DIRECTION('',(0.,1.,0.)); +#364550 = ORIENTED_EDGE('',*,*,#364310,.F.); +#364551 = ORIENTED_EDGE('',*,*,#364552,.F.); +#364552 = EDGE_CURVE('',#364522,#364311,#364553,.T.); +#364553 = LINE('',#364554,#364555); +#364554 = CARTESIAN_POINT('',(147.23,-114.685,0.)); +#364555 = VECTOR('',#364556,1.); +#364556 = DIRECTION('',(0.,1.,0.)); +#364557 = PLANE('',#364558); +#364558 = AXIS2_PLACEMENT_3D('',#364559,#364560,#364561); +#364559 = CARTESIAN_POINT('',(147.23,-114.685,0.)); +#364560 = DIRECTION('',(1.,-0.,0.)); +#364561 = DIRECTION('',(0.,1.,0.)); +#364562 = ADVANCED_FACE('',(#364563),#364573,.F.); +#364563 = FACE_BOUND('',#364564,.F.); +#364564 = EDGE_LOOP('',(#364565,#364566,#364567,#364568,#364569,#364570, + #364571,#364572)); +#364565 = ORIENTED_EDGE('',*,*,#364337,.T.); +#364566 = ORIENTED_EDGE('',*,*,#364369,.T.); +#364567 = ORIENTED_EDGE('',*,*,#364401,.T.); +#364568 = ORIENTED_EDGE('',*,*,#364433,.T.); +#364569 = ORIENTED_EDGE('',*,*,#364465,.T.); +#364570 = ORIENTED_EDGE('',*,*,#364497,.T.); +#364571 = ORIENTED_EDGE('',*,*,#364529,.T.); +#364572 = ORIENTED_EDGE('',*,*,#364552,.T.); +#364573 = PLANE('',#364574); +#364574 = AXIS2_PLACEMENT_3D('',#364575,#364576,#364577); +#364575 = CARTESIAN_POINT('',(0.,0.,0.)); +#364576 = DIRECTION('',(-0.,-0.,-1.)); +#364577 = DIRECTION('',(-1.,0.,0.)); +#364578 = ADVANCED_FACE('',(#364579),#364589,.T.); +#364579 = FACE_BOUND('',#364580,.T.); +#364580 = EDGE_LOOP('',(#364581,#364582,#364583,#364584,#364585,#364586, + #364587,#364588)); +#364581 = ORIENTED_EDGE('',*,*,#364320,.T.); +#364582 = ORIENTED_EDGE('',*,*,#364353,.T.); +#364583 = ORIENTED_EDGE('',*,*,#364384,.T.); +#364584 = ORIENTED_EDGE('',*,*,#364417,.T.); +#364585 = ORIENTED_EDGE('',*,*,#364448,.T.); +#364586 = ORIENTED_EDGE('',*,*,#364481,.T.); +#364587 = ORIENTED_EDGE('',*,*,#364512,.T.); +#364588 = ORIENTED_EDGE('',*,*,#364545,.T.); +#364589 = PLANE('',#364590); +#364590 = AXIS2_PLACEMENT_3D('',#364591,#364592,#364593); +#364591 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#364592 = DIRECTION('',(-0.,-0.,-1.)); +#364593 = DIRECTION('',(-1.,0.,0.)); +#364594 = MANIFOLD_SOLID_BREP('',#364595); +#364595 = CLOSED_SHELL('',(#364596,#364638,#364669,#364702,#364733, + #364766,#364797,#364830,#364852,#364868)); +#364596 = ADVANCED_FACE('',(#364597),#364633,.T.); +#364597 = FACE_BOUND('',#364598,.F.); +#364598 = EDGE_LOOP('',(#364599,#364609,#364618,#364626)); +#364599 = ORIENTED_EDGE('',*,*,#364600,.T.); +#364600 = EDGE_CURVE('',#364601,#364603,#364605,.T.); +#364601 = VERTEX_POINT('',#364602); +#364602 = CARTESIAN_POINT('',(149.6375,-120.8,0.)); +#364603 = VERTEX_POINT('',#364604); +#364604 = CARTESIAN_POINT('',(149.6375,-120.8,-4.E-02)); +#364605 = LINE('',#364606,#364607); +#364606 = CARTESIAN_POINT('',(149.6375,-120.8,0.)); +#364607 = VECTOR('',#364608,1.); +#364608 = DIRECTION('',(0.,0.,-1.)); +#364609 = ORIENTED_EDGE('',*,*,#364610,.T.); +#364610 = EDGE_CURVE('',#364603,#364611,#364613,.T.); +#364611 = VERTEX_POINT('',#364612); +#364612 = CARTESIAN_POINT('',(149.7875,-120.65,-4.E-02)); +#364613 = CIRCLE('',#364614,0.150000058649); +#364614 = AXIS2_PLACEMENT_3D('',#364615,#364616,#364617); +#364615 = CARTESIAN_POINT('',(149.78750005864,-120.8000000586,-4.E-02)); +#364616 = DIRECTION('',(0.,0.,-1.)); +#364617 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364618 = ORIENTED_EDGE('',*,*,#364619,.F.); +#364619 = EDGE_CURVE('',#364620,#364611,#364622,.T.); +#364620 = VERTEX_POINT('',#364621); +#364621 = CARTESIAN_POINT('',(149.7875,-120.65,0.)); +#364622 = LINE('',#364623,#364624); +#364623 = CARTESIAN_POINT('',(149.7875,-120.65,0.)); +#364624 = VECTOR('',#364625,1.); +#364625 = DIRECTION('',(0.,0.,-1.)); +#364626 = ORIENTED_EDGE('',*,*,#364627,.F.); +#364627 = EDGE_CURVE('',#364601,#364620,#364628,.T.); +#364628 = CIRCLE('',#364629,0.150000058649); +#364629 = AXIS2_PLACEMENT_3D('',#364630,#364631,#364632); +#364630 = CARTESIAN_POINT('',(149.78750005864,-120.8000000586,0.)); +#364631 = DIRECTION('',(0.,0.,-1.)); +#364632 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364633 = CYLINDRICAL_SURFACE('',#364634,0.150000058649); +#364634 = AXIS2_PLACEMENT_3D('',#364635,#364636,#364637); +#364635 = CARTESIAN_POINT('',(149.78750005864,-120.8000000586,0.)); +#364636 = DIRECTION('',(-0.,-0.,1.)); +#364637 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#364638 = ADVANCED_FACE('',(#364639),#364664,.F.); +#364639 = FACE_BOUND('',#364640,.F.); +#364640 = EDGE_LOOP('',(#364641,#364642,#364650,#364658)); +#364641 = ORIENTED_EDGE('',*,*,#364619,.T.); +#364642 = ORIENTED_EDGE('',*,*,#364643,.T.); +#364643 = EDGE_CURVE('',#364611,#364644,#364646,.T.); +#364644 = VERTEX_POINT('',#364645); +#364645 = CARTESIAN_POINT('',(150.9625,-120.65,-4.E-02)); +#364646 = LINE('',#364647,#364648); +#364647 = CARTESIAN_POINT('',(149.7875,-120.65,-4.E-02)); +#364648 = VECTOR('',#364649,1.); +#364649 = DIRECTION('',(1.,0.,0.)); +#364650 = ORIENTED_EDGE('',*,*,#364651,.F.); +#364651 = EDGE_CURVE('',#364652,#364644,#364654,.T.); +#364652 = VERTEX_POINT('',#364653); +#364653 = CARTESIAN_POINT('',(150.9625,-120.65,0.)); +#364654 = LINE('',#364655,#364656); +#364655 = CARTESIAN_POINT('',(150.9625,-120.65,0.)); +#364656 = VECTOR('',#364657,1.); +#364657 = DIRECTION('',(0.,0.,-1.)); +#364658 = ORIENTED_EDGE('',*,*,#364659,.F.); +#364659 = EDGE_CURVE('',#364620,#364652,#364660,.T.); +#364660 = LINE('',#364661,#364662); +#364661 = CARTESIAN_POINT('',(149.7875,-120.65,0.)); +#364662 = VECTOR('',#364663,1.); +#364663 = DIRECTION('',(1.,0.,0.)); +#364664 = PLANE('',#364665); +#364665 = AXIS2_PLACEMENT_3D('',#364666,#364667,#364668); +#364666 = CARTESIAN_POINT('',(149.7875,-120.65,0.)); +#364667 = DIRECTION('',(0.,-1.,0.)); +#364668 = DIRECTION('',(1.,0.,0.)); +#364669 = ADVANCED_FACE('',(#364670),#364697,.T.); +#364670 = FACE_BOUND('',#364671,.F.); +#364671 = EDGE_LOOP('',(#364672,#364673,#364682,#364690)); +#364672 = ORIENTED_EDGE('',*,*,#364651,.T.); +#364673 = ORIENTED_EDGE('',*,*,#364674,.T.); +#364674 = EDGE_CURVE('',#364644,#364675,#364677,.T.); +#364675 = VERTEX_POINT('',#364676); +#364676 = CARTESIAN_POINT('',(151.1125,-120.8,-4.E-02)); +#364677 = CIRCLE('',#364678,0.150000058649); +#364678 = AXIS2_PLACEMENT_3D('',#364679,#364680,#364681); +#364679 = CARTESIAN_POINT('',(150.96249994135,-120.8000000586,-4.E-02)); +#364680 = DIRECTION('',(0.,0.,-1.)); +#364681 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364682 = ORIENTED_EDGE('',*,*,#364683,.F.); +#364683 = EDGE_CURVE('',#364684,#364675,#364686,.T.); +#364684 = VERTEX_POINT('',#364685); +#364685 = CARTESIAN_POINT('',(151.1125,-120.8,0.)); +#364686 = LINE('',#364687,#364688); +#364687 = CARTESIAN_POINT('',(151.1125,-120.8,0.)); +#364688 = VECTOR('',#364689,1.); +#364689 = DIRECTION('',(0.,0.,-1.)); +#364690 = ORIENTED_EDGE('',*,*,#364691,.F.); +#364691 = EDGE_CURVE('',#364652,#364684,#364692,.T.); +#364692 = CIRCLE('',#364693,0.150000058649); +#364693 = AXIS2_PLACEMENT_3D('',#364694,#364695,#364696); +#364694 = CARTESIAN_POINT('',(150.96249994135,-120.8000000586,0.)); +#364695 = DIRECTION('',(0.,0.,-1.)); +#364696 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364697 = CYLINDRICAL_SURFACE('',#364698,0.150000058649); +#364698 = AXIS2_PLACEMENT_3D('',#364699,#364700,#364701); +#364699 = CARTESIAN_POINT('',(150.96249994135,-120.8000000586,0.)); +#364700 = DIRECTION('',(-0.,-0.,1.)); +#364701 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364702 = ADVANCED_FACE('',(#364703),#364728,.F.); +#364703 = FACE_BOUND('',#364704,.F.); +#364704 = EDGE_LOOP('',(#364705,#364706,#364714,#364722)); +#364705 = ORIENTED_EDGE('',*,*,#364683,.T.); +#364706 = ORIENTED_EDGE('',*,*,#364707,.T.); +#364707 = EDGE_CURVE('',#364675,#364708,#364710,.T.); +#364708 = VERTEX_POINT('',#364709); +#364709 = CARTESIAN_POINT('',(151.1125,-121.1,-4.E-02)); +#364710 = LINE('',#364711,#364712); +#364711 = CARTESIAN_POINT('',(151.1125,-120.8,-4.E-02)); +#364712 = VECTOR('',#364713,1.); +#364713 = DIRECTION('',(0.,-1.,0.)); +#364714 = ORIENTED_EDGE('',*,*,#364715,.F.); +#364715 = EDGE_CURVE('',#364716,#364708,#364718,.T.); +#364716 = VERTEX_POINT('',#364717); +#364717 = CARTESIAN_POINT('',(151.1125,-121.1,0.)); +#364718 = LINE('',#364719,#364720); +#364719 = CARTESIAN_POINT('',(151.1125,-121.1,0.)); +#364720 = VECTOR('',#364721,1.); +#364721 = DIRECTION('',(0.,0.,-1.)); +#364722 = ORIENTED_EDGE('',*,*,#364723,.F.); +#364723 = EDGE_CURVE('',#364684,#364716,#364724,.T.); +#364724 = LINE('',#364725,#364726); +#364725 = CARTESIAN_POINT('',(151.1125,-120.8,0.)); +#364726 = VECTOR('',#364727,1.); +#364727 = DIRECTION('',(0.,-1.,0.)); +#364728 = PLANE('',#364729); +#364729 = AXIS2_PLACEMENT_3D('',#364730,#364731,#364732); +#364730 = CARTESIAN_POINT('',(151.1125,-120.8,0.)); +#364731 = DIRECTION('',(-1.,-0.,-0.)); +#364732 = DIRECTION('',(0.,-1.,0.)); +#364733 = ADVANCED_FACE('',(#364734),#364761,.T.); +#364734 = FACE_BOUND('',#364735,.F.); +#364735 = EDGE_LOOP('',(#364736,#364737,#364746,#364754)); +#364736 = ORIENTED_EDGE('',*,*,#364715,.T.); +#364737 = ORIENTED_EDGE('',*,*,#364738,.T.); +#364738 = EDGE_CURVE('',#364708,#364739,#364741,.T.); +#364739 = VERTEX_POINT('',#364740); +#364740 = CARTESIAN_POINT('',(150.9625,-121.25,-4.E-02)); +#364741 = CIRCLE('',#364742,0.150000058649); +#364742 = AXIS2_PLACEMENT_3D('',#364743,#364744,#364745); +#364743 = CARTESIAN_POINT('',(150.96249994135,-121.0999999413,-4.E-02)); +#364744 = DIRECTION('',(0.,0.,-1.)); +#364745 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364746 = ORIENTED_EDGE('',*,*,#364747,.F.); +#364747 = EDGE_CURVE('',#364748,#364739,#364750,.T.); +#364748 = VERTEX_POINT('',#364749); +#364749 = CARTESIAN_POINT('',(150.9625,-121.25,0.)); +#364750 = LINE('',#364751,#364752); +#364751 = CARTESIAN_POINT('',(150.9625,-121.25,0.)); +#364752 = VECTOR('',#364753,1.); +#364753 = DIRECTION('',(0.,0.,-1.)); +#364754 = ORIENTED_EDGE('',*,*,#364755,.F.); +#364755 = EDGE_CURVE('',#364716,#364748,#364756,.T.); +#364756 = CIRCLE('',#364757,0.150000058649); +#364757 = AXIS2_PLACEMENT_3D('',#364758,#364759,#364760); +#364758 = CARTESIAN_POINT('',(150.96249994135,-121.0999999413,0.)); +#364759 = DIRECTION('',(0.,0.,-1.)); +#364760 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364761 = CYLINDRICAL_SURFACE('',#364762,0.150000058649); +#364762 = AXIS2_PLACEMENT_3D('',#364763,#364764,#364765); +#364763 = CARTESIAN_POINT('',(150.96249994135,-121.0999999413,0.)); +#364764 = DIRECTION('',(-0.,-0.,1.)); +#364765 = DIRECTION('',(1.,-3.909953142369E-07,0.)); +#364766 = ADVANCED_FACE('',(#364767),#364792,.F.); +#364767 = FACE_BOUND('',#364768,.F.); +#364768 = EDGE_LOOP('',(#364769,#364770,#364778,#364786)); +#364769 = ORIENTED_EDGE('',*,*,#364747,.T.); +#364770 = ORIENTED_EDGE('',*,*,#364771,.T.); +#364771 = EDGE_CURVE('',#364739,#364772,#364774,.T.); +#364772 = VERTEX_POINT('',#364773); +#364773 = CARTESIAN_POINT('',(149.7875,-121.25,-4.E-02)); +#364774 = LINE('',#364775,#364776); +#364775 = CARTESIAN_POINT('',(150.9625,-121.25,-4.E-02)); +#364776 = VECTOR('',#364777,1.); +#364777 = DIRECTION('',(-1.,0.,0.)); +#364778 = ORIENTED_EDGE('',*,*,#364779,.F.); +#364779 = EDGE_CURVE('',#364780,#364772,#364782,.T.); +#364780 = VERTEX_POINT('',#364781); +#364781 = CARTESIAN_POINT('',(149.7875,-121.25,0.)); +#364782 = LINE('',#364783,#364784); +#364783 = CARTESIAN_POINT('',(149.7875,-121.25,0.)); +#364784 = VECTOR('',#364785,1.); +#364785 = DIRECTION('',(0.,0.,-1.)); +#364786 = ORIENTED_EDGE('',*,*,#364787,.F.); +#364787 = EDGE_CURVE('',#364748,#364780,#364788,.T.); +#364788 = LINE('',#364789,#364790); +#364789 = CARTESIAN_POINT('',(150.9625,-121.25,0.)); +#364790 = VECTOR('',#364791,1.); +#364791 = DIRECTION('',(-1.,0.,0.)); +#364792 = PLANE('',#364793); +#364793 = AXIS2_PLACEMENT_3D('',#364794,#364795,#364796); +#364794 = CARTESIAN_POINT('',(150.9625,-121.25,0.)); +#364795 = DIRECTION('',(0.,1.,0.)); +#364796 = DIRECTION('',(-1.,0.,0.)); +#364797 = ADVANCED_FACE('',(#364798),#364825,.T.); +#364798 = FACE_BOUND('',#364799,.F.); +#364799 = EDGE_LOOP('',(#364800,#364801,#364810,#364818)); +#364800 = ORIENTED_EDGE('',*,*,#364779,.T.); +#364801 = ORIENTED_EDGE('',*,*,#364802,.T.); +#364802 = EDGE_CURVE('',#364772,#364803,#364805,.T.); +#364803 = VERTEX_POINT('',#364804); +#364804 = CARTESIAN_POINT('',(149.6375,-121.1,-4.E-02)); +#364805 = CIRCLE('',#364806,0.150000058649); +#364806 = AXIS2_PLACEMENT_3D('',#364807,#364808,#364809); +#364807 = CARTESIAN_POINT('',(149.78750005864,-121.0999999413,-4.E-02)); +#364808 = DIRECTION('',(0.,0.,-1.)); +#364809 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364810 = ORIENTED_EDGE('',*,*,#364811,.F.); +#364811 = EDGE_CURVE('',#364812,#364803,#364814,.T.); +#364812 = VERTEX_POINT('',#364813); +#364813 = CARTESIAN_POINT('',(149.6375,-121.1,0.)); +#364814 = LINE('',#364815,#364816); +#364815 = CARTESIAN_POINT('',(149.6375,-121.1,0.)); +#364816 = VECTOR('',#364817,1.); +#364817 = DIRECTION('',(0.,0.,-1.)); +#364818 = ORIENTED_EDGE('',*,*,#364819,.F.); +#364819 = EDGE_CURVE('',#364780,#364812,#364820,.T.); +#364820 = CIRCLE('',#364821,0.150000058649); +#364821 = AXIS2_PLACEMENT_3D('',#364822,#364823,#364824); +#364822 = CARTESIAN_POINT('',(149.78750005864,-121.0999999413,0.)); +#364823 = DIRECTION('',(0.,0.,-1.)); +#364824 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364825 = CYLINDRICAL_SURFACE('',#364826,0.150000058649); +#364826 = AXIS2_PLACEMENT_3D('',#364827,#364828,#364829); +#364827 = CARTESIAN_POINT('',(149.78750005864,-121.0999999413,0.)); +#364828 = DIRECTION('',(-0.,-0.,1.)); +#364829 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#364830 = ADVANCED_FACE('',(#364831),#364847,.F.); +#364831 = FACE_BOUND('',#364832,.F.); +#364832 = EDGE_LOOP('',(#364833,#364834,#364840,#364841)); +#364833 = ORIENTED_EDGE('',*,*,#364811,.T.); +#364834 = ORIENTED_EDGE('',*,*,#364835,.T.); +#364835 = EDGE_CURVE('',#364803,#364603,#364836,.T.); +#364836 = LINE('',#364837,#364838); +#364837 = CARTESIAN_POINT('',(149.6375,-121.1,-4.E-02)); +#364838 = VECTOR('',#364839,1.); +#364839 = DIRECTION('',(0.,1.,0.)); +#364840 = ORIENTED_EDGE('',*,*,#364600,.F.); +#364841 = ORIENTED_EDGE('',*,*,#364842,.F.); +#364842 = EDGE_CURVE('',#364812,#364601,#364843,.T.); +#364843 = LINE('',#364844,#364845); +#364844 = CARTESIAN_POINT('',(149.6375,-121.1,0.)); +#364845 = VECTOR('',#364846,1.); +#364846 = DIRECTION('',(0.,1.,0.)); +#364847 = PLANE('',#364848); +#364848 = AXIS2_PLACEMENT_3D('',#364849,#364850,#364851); +#364849 = CARTESIAN_POINT('',(149.6375,-121.1,0.)); +#364850 = DIRECTION('',(1.,-0.,0.)); +#364851 = DIRECTION('',(0.,1.,0.)); +#364852 = ADVANCED_FACE('',(#364853),#364863,.F.); +#364853 = FACE_BOUND('',#364854,.F.); +#364854 = EDGE_LOOP('',(#364855,#364856,#364857,#364858,#364859,#364860, + #364861,#364862)); +#364855 = ORIENTED_EDGE('',*,*,#364627,.T.); +#364856 = ORIENTED_EDGE('',*,*,#364659,.T.); +#364857 = ORIENTED_EDGE('',*,*,#364691,.T.); +#364858 = ORIENTED_EDGE('',*,*,#364723,.T.); +#364859 = ORIENTED_EDGE('',*,*,#364755,.T.); +#364860 = ORIENTED_EDGE('',*,*,#364787,.T.); +#364861 = ORIENTED_EDGE('',*,*,#364819,.T.); +#364862 = ORIENTED_EDGE('',*,*,#364842,.T.); +#364863 = PLANE('',#364864); +#364864 = AXIS2_PLACEMENT_3D('',#364865,#364866,#364867); +#364865 = CARTESIAN_POINT('',(0.,0.,0.)); +#364866 = DIRECTION('',(-0.,-0.,-1.)); +#364867 = DIRECTION('',(-1.,0.,0.)); +#364868 = ADVANCED_FACE('',(#364869),#364879,.T.); +#364869 = FACE_BOUND('',#364870,.T.); +#364870 = EDGE_LOOP('',(#364871,#364872,#364873,#364874,#364875,#364876, + #364877,#364878)); +#364871 = ORIENTED_EDGE('',*,*,#364610,.T.); +#364872 = ORIENTED_EDGE('',*,*,#364643,.T.); +#364873 = ORIENTED_EDGE('',*,*,#364674,.T.); +#364874 = ORIENTED_EDGE('',*,*,#364707,.T.); +#364875 = ORIENTED_EDGE('',*,*,#364738,.T.); +#364876 = ORIENTED_EDGE('',*,*,#364771,.T.); +#364877 = ORIENTED_EDGE('',*,*,#364802,.T.); +#364878 = ORIENTED_EDGE('',*,*,#364835,.T.); +#364879 = PLANE('',#364880); +#364880 = AXIS2_PLACEMENT_3D('',#364881,#364882,#364883); +#364881 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#364882 = DIRECTION('',(-0.,-0.,-1.)); +#364883 = DIRECTION('',(-1.,0.,0.)); +#364884 = MANIFOLD_SOLID_BREP('',#364885); +#364885 = CLOSED_SHELL('',(#364886,#364928,#364959,#364992,#365023, + #365056,#365087,#365120,#365142,#365158)); +#364886 = ADVANCED_FACE('',(#364887),#364923,.T.); +#364887 = FACE_BOUND('',#364888,.F.); +#364888 = EDGE_LOOP('',(#364889,#364899,#364908,#364916)); +#364889 = ORIENTED_EDGE('',*,*,#364890,.T.); +#364890 = EDGE_CURVE('',#364891,#364893,#364895,.T.); +#364891 = VERTEX_POINT('',#364892); +#364892 = CARTESIAN_POINT('',(149.65,-124.925,0.)); +#364893 = VERTEX_POINT('',#364894); +#364894 = CARTESIAN_POINT('',(149.65,-124.925,-4.E-02)); +#364895 = LINE('',#364896,#364897); +#364896 = CARTESIAN_POINT('',(149.65,-124.925,0.)); +#364897 = VECTOR('',#364898,1.); +#364898 = DIRECTION('',(0.,0.,-1.)); +#364899 = ORIENTED_EDGE('',*,*,#364900,.T.); +#364900 = EDGE_CURVE('',#364893,#364901,#364903,.T.); +#364901 = VERTEX_POINT('',#364902); +#364902 = CARTESIAN_POINT('',(149.875,-124.7,-4.E-02)); +#364903 = CIRCLE('',#364904,0.225000087974); +#364904 = AXIS2_PLACEMENT_3D('',#364905,#364906,#364907); +#364905 = CARTESIAN_POINT('',(149.87500008797,-124.9250000879,-4.E-02)); +#364906 = DIRECTION('',(0.,0.,-1.)); +#364907 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#364908 = ORIENTED_EDGE('',*,*,#364909,.F.); +#364909 = EDGE_CURVE('',#364910,#364901,#364912,.T.); +#364910 = VERTEX_POINT('',#364911); +#364911 = CARTESIAN_POINT('',(149.875,-124.7,0.)); +#364912 = LINE('',#364913,#364914); +#364913 = CARTESIAN_POINT('',(149.875,-124.7,0.)); +#364914 = VECTOR('',#364915,1.); +#364915 = DIRECTION('',(0.,0.,-1.)); +#364916 = ORIENTED_EDGE('',*,*,#364917,.F.); +#364917 = EDGE_CURVE('',#364891,#364910,#364918,.T.); +#364918 = CIRCLE('',#364919,0.225000087974); +#364919 = AXIS2_PLACEMENT_3D('',#364920,#364921,#364922); +#364920 = CARTESIAN_POINT('',(149.87500008797,-124.9250000879,0.)); +#364921 = DIRECTION('',(0.,0.,-1.)); +#364922 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#364923 = CYLINDRICAL_SURFACE('',#364924,0.225000087974); +#364924 = AXIS2_PLACEMENT_3D('',#364925,#364926,#364927); +#364925 = CARTESIAN_POINT('',(149.87500008797,-124.9250000879,0.)); +#364926 = DIRECTION('',(-0.,-0.,1.)); +#364927 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#364928 = ADVANCED_FACE('',(#364929),#364954,.F.); +#364929 = FACE_BOUND('',#364930,.F.); +#364930 = EDGE_LOOP('',(#364931,#364932,#364940,#364948)); +#364931 = ORIENTED_EDGE('',*,*,#364909,.T.); +#364932 = ORIENTED_EDGE('',*,*,#364933,.T.); +#364933 = EDGE_CURVE('',#364901,#364934,#364936,.T.); +#364934 = VERTEX_POINT('',#364935); +#364935 = CARTESIAN_POINT('',(150.625,-124.7,-4.E-02)); +#364936 = LINE('',#364937,#364938); +#364937 = CARTESIAN_POINT('',(149.875,-124.7,-4.E-02)); +#364938 = VECTOR('',#364939,1.); +#364939 = DIRECTION('',(1.,0.,0.)); +#364940 = ORIENTED_EDGE('',*,*,#364941,.F.); +#364941 = EDGE_CURVE('',#364942,#364934,#364944,.T.); +#364942 = VERTEX_POINT('',#364943); +#364943 = CARTESIAN_POINT('',(150.625,-124.7,0.)); +#364944 = LINE('',#364945,#364946); +#364945 = CARTESIAN_POINT('',(150.625,-124.7,0.)); +#364946 = VECTOR('',#364947,1.); +#364947 = DIRECTION('',(0.,0.,-1.)); +#364948 = ORIENTED_EDGE('',*,*,#364949,.F.); +#364949 = EDGE_CURVE('',#364910,#364942,#364950,.T.); +#364950 = LINE('',#364951,#364952); +#364951 = CARTESIAN_POINT('',(149.875,-124.7,0.)); +#364952 = VECTOR('',#364953,1.); +#364953 = DIRECTION('',(1.,0.,0.)); +#364954 = PLANE('',#364955); +#364955 = AXIS2_PLACEMENT_3D('',#364956,#364957,#364958); +#364956 = CARTESIAN_POINT('',(149.875,-124.7,0.)); +#364957 = DIRECTION('',(0.,-1.,0.)); +#364958 = DIRECTION('',(1.,0.,0.)); +#364959 = ADVANCED_FACE('',(#364960),#364987,.T.); +#364960 = FACE_BOUND('',#364961,.F.); +#364961 = EDGE_LOOP('',(#364962,#364963,#364972,#364980)); +#364962 = ORIENTED_EDGE('',*,*,#364941,.T.); +#364963 = ORIENTED_EDGE('',*,*,#364964,.T.); +#364964 = EDGE_CURVE('',#364934,#364965,#364967,.T.); +#364965 = VERTEX_POINT('',#364966); +#364966 = CARTESIAN_POINT('',(150.85,-124.925,-4.E-02)); +#364967 = CIRCLE('',#364968,0.225000087974); +#364968 = AXIS2_PLACEMENT_3D('',#364969,#364970,#364971); +#364969 = CARTESIAN_POINT('',(150.62499991202,-124.9250000879,-4.E-02)); +#364970 = DIRECTION('',(0.,0.,-1.)); +#364971 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364972 = ORIENTED_EDGE('',*,*,#364973,.F.); +#364973 = EDGE_CURVE('',#364974,#364965,#364976,.T.); +#364974 = VERTEX_POINT('',#364975); +#364975 = CARTESIAN_POINT('',(150.85,-124.925,0.)); +#364976 = LINE('',#364977,#364978); +#364977 = CARTESIAN_POINT('',(150.85,-124.925,0.)); +#364978 = VECTOR('',#364979,1.); +#364979 = DIRECTION('',(0.,0.,-1.)); +#364980 = ORIENTED_EDGE('',*,*,#364981,.F.); +#364981 = EDGE_CURVE('',#364942,#364974,#364982,.T.); +#364982 = CIRCLE('',#364983,0.225000087974); +#364983 = AXIS2_PLACEMENT_3D('',#364984,#364985,#364986); +#364984 = CARTESIAN_POINT('',(150.62499991202,-124.9250000879,0.)); +#364985 = DIRECTION('',(0.,0.,-1.)); +#364986 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364987 = CYLINDRICAL_SURFACE('',#364988,0.225000087974); +#364988 = AXIS2_PLACEMENT_3D('',#364989,#364990,#364991); +#364989 = CARTESIAN_POINT('',(150.62499991202,-124.9250000879,0.)); +#364990 = DIRECTION('',(-0.,-0.,1.)); +#364991 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#364992 = ADVANCED_FACE('',(#364993),#365018,.F.); +#364993 = FACE_BOUND('',#364994,.F.); +#364994 = EDGE_LOOP('',(#364995,#364996,#365004,#365012)); +#364995 = ORIENTED_EDGE('',*,*,#364973,.T.); +#364996 = ORIENTED_EDGE('',*,*,#364997,.T.); +#364997 = EDGE_CURVE('',#364965,#364998,#365000,.T.); +#364998 = VERTEX_POINT('',#364999); +#364999 = CARTESIAN_POINT('',(150.85,-125.375,-4.E-02)); +#365000 = LINE('',#365001,#365002); +#365001 = CARTESIAN_POINT('',(150.85,-124.925,-4.E-02)); +#365002 = VECTOR('',#365003,1.); +#365003 = DIRECTION('',(0.,-1.,0.)); +#365004 = ORIENTED_EDGE('',*,*,#365005,.F.); +#365005 = EDGE_CURVE('',#365006,#364998,#365008,.T.); +#365006 = VERTEX_POINT('',#365007); +#365007 = CARTESIAN_POINT('',(150.85,-125.375,0.)); +#365008 = LINE('',#365009,#365010); +#365009 = CARTESIAN_POINT('',(150.85,-125.375,0.)); +#365010 = VECTOR('',#365011,1.); +#365011 = DIRECTION('',(0.,0.,-1.)); +#365012 = ORIENTED_EDGE('',*,*,#365013,.F.); +#365013 = EDGE_CURVE('',#364974,#365006,#365014,.T.); +#365014 = LINE('',#365015,#365016); +#365015 = CARTESIAN_POINT('',(150.85,-124.925,0.)); +#365016 = VECTOR('',#365017,1.); +#365017 = DIRECTION('',(0.,-1.,0.)); +#365018 = PLANE('',#365019); +#365019 = AXIS2_PLACEMENT_3D('',#365020,#365021,#365022); +#365020 = CARTESIAN_POINT('',(150.85,-124.925,0.)); +#365021 = DIRECTION('',(-1.,-0.,-0.)); +#365022 = DIRECTION('',(0.,-1.,0.)); +#365023 = ADVANCED_FACE('',(#365024),#365051,.T.); +#365024 = FACE_BOUND('',#365025,.F.); +#365025 = EDGE_LOOP('',(#365026,#365027,#365036,#365044)); +#365026 = ORIENTED_EDGE('',*,*,#365005,.T.); +#365027 = ORIENTED_EDGE('',*,*,#365028,.T.); +#365028 = EDGE_CURVE('',#364998,#365029,#365031,.T.); +#365029 = VERTEX_POINT('',#365030); +#365030 = CARTESIAN_POINT('',(150.625,-125.6,-4.E-02)); +#365031 = CIRCLE('',#365032,0.225000087974); +#365032 = AXIS2_PLACEMENT_3D('',#365033,#365034,#365035); +#365033 = CARTESIAN_POINT('',(150.62499991202,-125.374999912,-4.E-02)); +#365034 = DIRECTION('',(0.,0.,-1.)); +#365035 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365036 = ORIENTED_EDGE('',*,*,#365037,.F.); +#365037 = EDGE_CURVE('',#365038,#365029,#365040,.T.); +#365038 = VERTEX_POINT('',#365039); +#365039 = CARTESIAN_POINT('',(150.625,-125.6,0.)); +#365040 = LINE('',#365041,#365042); +#365041 = CARTESIAN_POINT('',(150.625,-125.6,0.)); +#365042 = VECTOR('',#365043,1.); +#365043 = DIRECTION('',(0.,0.,-1.)); +#365044 = ORIENTED_EDGE('',*,*,#365045,.F.); +#365045 = EDGE_CURVE('',#365006,#365038,#365046,.T.); +#365046 = CIRCLE('',#365047,0.225000087974); +#365047 = AXIS2_PLACEMENT_3D('',#365048,#365049,#365050); +#365048 = CARTESIAN_POINT('',(150.62499991202,-125.374999912,0.)); +#365049 = DIRECTION('',(0.,0.,-1.)); +#365050 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365051 = CYLINDRICAL_SURFACE('',#365052,0.225000087974); +#365052 = AXIS2_PLACEMENT_3D('',#365053,#365054,#365055); +#365053 = CARTESIAN_POINT('',(150.62499991202,-125.374999912,0.)); +#365054 = DIRECTION('',(-0.,-0.,1.)); +#365055 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365056 = ADVANCED_FACE('',(#365057),#365082,.F.); +#365057 = FACE_BOUND('',#365058,.F.); +#365058 = EDGE_LOOP('',(#365059,#365060,#365068,#365076)); +#365059 = ORIENTED_EDGE('',*,*,#365037,.T.); +#365060 = ORIENTED_EDGE('',*,*,#365061,.T.); +#365061 = EDGE_CURVE('',#365029,#365062,#365064,.T.); +#365062 = VERTEX_POINT('',#365063); +#365063 = CARTESIAN_POINT('',(149.875,-125.6,-4.E-02)); +#365064 = LINE('',#365065,#365066); +#365065 = CARTESIAN_POINT('',(150.625,-125.6,-4.E-02)); +#365066 = VECTOR('',#365067,1.); +#365067 = DIRECTION('',(-1.,0.,0.)); +#365068 = ORIENTED_EDGE('',*,*,#365069,.F.); +#365069 = EDGE_CURVE('',#365070,#365062,#365072,.T.); +#365070 = VERTEX_POINT('',#365071); +#365071 = CARTESIAN_POINT('',(149.875,-125.6,0.)); +#365072 = LINE('',#365073,#365074); +#365073 = CARTESIAN_POINT('',(149.875,-125.6,0.)); +#365074 = VECTOR('',#365075,1.); +#365075 = DIRECTION('',(0.,0.,-1.)); +#365076 = ORIENTED_EDGE('',*,*,#365077,.F.); +#365077 = EDGE_CURVE('',#365038,#365070,#365078,.T.); +#365078 = LINE('',#365079,#365080); +#365079 = CARTESIAN_POINT('',(150.625,-125.6,0.)); +#365080 = VECTOR('',#365081,1.); +#365081 = DIRECTION('',(-1.,0.,0.)); +#365082 = PLANE('',#365083); +#365083 = AXIS2_PLACEMENT_3D('',#365084,#365085,#365086); +#365084 = CARTESIAN_POINT('',(150.625,-125.6,0.)); +#365085 = DIRECTION('',(0.,1.,0.)); +#365086 = DIRECTION('',(-1.,0.,0.)); +#365087 = ADVANCED_FACE('',(#365088),#365115,.T.); +#365088 = FACE_BOUND('',#365089,.F.); +#365089 = EDGE_LOOP('',(#365090,#365091,#365100,#365108)); +#365090 = ORIENTED_EDGE('',*,*,#365069,.T.); +#365091 = ORIENTED_EDGE('',*,*,#365092,.T.); +#365092 = EDGE_CURVE('',#365062,#365093,#365095,.T.); +#365093 = VERTEX_POINT('',#365094); +#365094 = CARTESIAN_POINT('',(149.65,-125.375,-4.E-02)); +#365095 = CIRCLE('',#365096,0.225000087974); +#365096 = AXIS2_PLACEMENT_3D('',#365097,#365098,#365099); +#365097 = CARTESIAN_POINT('',(149.87500008797,-125.374999912,-4.E-02)); +#365098 = DIRECTION('',(0.,0.,-1.)); +#365099 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365100 = ORIENTED_EDGE('',*,*,#365101,.F.); +#365101 = EDGE_CURVE('',#365102,#365093,#365104,.T.); +#365102 = VERTEX_POINT('',#365103); +#365103 = CARTESIAN_POINT('',(149.65,-125.375,0.)); +#365104 = LINE('',#365105,#365106); +#365105 = CARTESIAN_POINT('',(149.65,-125.375,0.)); +#365106 = VECTOR('',#365107,1.); +#365107 = DIRECTION('',(0.,0.,-1.)); +#365108 = ORIENTED_EDGE('',*,*,#365109,.F.); +#365109 = EDGE_CURVE('',#365070,#365102,#365110,.T.); +#365110 = CIRCLE('',#365111,0.225000087974); +#365111 = AXIS2_PLACEMENT_3D('',#365112,#365113,#365114); +#365112 = CARTESIAN_POINT('',(149.87500008797,-125.374999912,0.)); +#365113 = DIRECTION('',(0.,0.,-1.)); +#365114 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365115 = CYLINDRICAL_SURFACE('',#365116,0.225000087974); +#365116 = AXIS2_PLACEMENT_3D('',#365117,#365118,#365119); +#365117 = CARTESIAN_POINT('',(149.87500008797,-125.374999912,0.)); +#365118 = DIRECTION('',(-0.,-0.,1.)); +#365119 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365120 = ADVANCED_FACE('',(#365121),#365137,.F.); +#365121 = FACE_BOUND('',#365122,.F.); +#365122 = EDGE_LOOP('',(#365123,#365124,#365130,#365131)); +#365123 = ORIENTED_EDGE('',*,*,#365101,.T.); +#365124 = ORIENTED_EDGE('',*,*,#365125,.T.); +#365125 = EDGE_CURVE('',#365093,#364893,#365126,.T.); +#365126 = LINE('',#365127,#365128); +#365127 = CARTESIAN_POINT('',(149.65,-125.375,-4.E-02)); +#365128 = VECTOR('',#365129,1.); +#365129 = DIRECTION('',(0.,1.,0.)); +#365130 = ORIENTED_EDGE('',*,*,#364890,.F.); +#365131 = ORIENTED_EDGE('',*,*,#365132,.F.); +#365132 = EDGE_CURVE('',#365102,#364891,#365133,.T.); +#365133 = LINE('',#365134,#365135); +#365134 = CARTESIAN_POINT('',(149.65,-125.375,0.)); +#365135 = VECTOR('',#365136,1.); +#365136 = DIRECTION('',(0.,1.,0.)); +#365137 = PLANE('',#365138); +#365138 = AXIS2_PLACEMENT_3D('',#365139,#365140,#365141); +#365139 = CARTESIAN_POINT('',(149.65,-125.375,0.)); +#365140 = DIRECTION('',(1.,-0.,0.)); +#365141 = DIRECTION('',(0.,1.,0.)); +#365142 = ADVANCED_FACE('',(#365143),#365153,.F.); +#365143 = FACE_BOUND('',#365144,.F.); +#365144 = EDGE_LOOP('',(#365145,#365146,#365147,#365148,#365149,#365150, + #365151,#365152)); +#365145 = ORIENTED_EDGE('',*,*,#364917,.T.); +#365146 = ORIENTED_EDGE('',*,*,#364949,.T.); +#365147 = ORIENTED_EDGE('',*,*,#364981,.T.); +#365148 = ORIENTED_EDGE('',*,*,#365013,.T.); +#365149 = ORIENTED_EDGE('',*,*,#365045,.T.); +#365150 = ORIENTED_EDGE('',*,*,#365077,.T.); +#365151 = ORIENTED_EDGE('',*,*,#365109,.T.); +#365152 = ORIENTED_EDGE('',*,*,#365132,.T.); +#365153 = PLANE('',#365154); +#365154 = AXIS2_PLACEMENT_3D('',#365155,#365156,#365157); +#365155 = CARTESIAN_POINT('',(0.,0.,0.)); +#365156 = DIRECTION('',(-0.,-0.,-1.)); +#365157 = DIRECTION('',(-1.,0.,0.)); +#365158 = ADVANCED_FACE('',(#365159),#365169,.T.); +#365159 = FACE_BOUND('',#365160,.T.); +#365160 = EDGE_LOOP('',(#365161,#365162,#365163,#365164,#365165,#365166, + #365167,#365168)); +#365161 = ORIENTED_EDGE('',*,*,#364900,.T.); +#365162 = ORIENTED_EDGE('',*,*,#364933,.T.); +#365163 = ORIENTED_EDGE('',*,*,#364964,.T.); +#365164 = ORIENTED_EDGE('',*,*,#364997,.T.); +#365165 = ORIENTED_EDGE('',*,*,#365028,.T.); +#365166 = ORIENTED_EDGE('',*,*,#365061,.T.); +#365167 = ORIENTED_EDGE('',*,*,#365092,.T.); +#365168 = ORIENTED_EDGE('',*,*,#365125,.T.); +#365169 = PLANE('',#365170); +#365170 = AXIS2_PLACEMENT_3D('',#365171,#365172,#365173); +#365171 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#365172 = DIRECTION('',(-0.,-0.,-1.)); +#365173 = DIRECTION('',(-1.,0.,0.)); +#365174 = MANIFOLD_SOLID_BREP('',#365175); +#365175 = CLOSED_SHELL('',(#365176,#365218,#365249,#365282,#365313, + #365346,#365377,#365410,#365432,#365448)); +#365176 = ADVANCED_FACE('',(#365177),#365213,.T.); +#365177 = FACE_BOUND('',#365178,.F.); +#365178 = EDGE_LOOP('',(#365179,#365189,#365198,#365206)); +#365179 = ORIENTED_EDGE('',*,*,#365180,.T.); +#365180 = EDGE_CURVE('',#365181,#365183,#365185,.T.); +#365181 = VERTEX_POINT('',#365182); +#365182 = CARTESIAN_POINT('',(146.14,-120.62,0.)); +#365183 = VERTEX_POINT('',#365184); +#365184 = CARTESIAN_POINT('',(146.14,-120.62,-4.E-02)); +#365185 = LINE('',#365186,#365187); +#365186 = CARTESIAN_POINT('',(146.14,-120.62,0.)); +#365187 = VECTOR('',#365188,1.); +#365188 = DIRECTION('',(0.,0.,-1.)); +#365189 = ORIENTED_EDGE('',*,*,#365190,.T.); +#365190 = EDGE_CURVE('',#365183,#365191,#365193,.T.); +#365191 = VERTEX_POINT('',#365192); +#365192 = CARTESIAN_POINT('',(146.28,-120.48,-4.E-02)); +#365193 = CIRCLE('',#365194,0.139999827125); +#365194 = AXIS2_PLACEMENT_3D('',#365195,#365196,#365197); +#365195 = CARTESIAN_POINT('',(146.27999982712,-120.6199998271,-4.E-02)); +#365196 = DIRECTION('',(0.,0.,-1.)); +#365197 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#365198 = ORIENTED_EDGE('',*,*,#365199,.F.); +#365199 = EDGE_CURVE('',#365200,#365191,#365202,.T.); +#365200 = VERTEX_POINT('',#365201); +#365201 = CARTESIAN_POINT('',(146.28,-120.48,0.)); +#365202 = LINE('',#365203,#365204); +#365203 = CARTESIAN_POINT('',(146.28,-120.48,0.)); +#365204 = VECTOR('',#365205,1.); +#365205 = DIRECTION('',(0.,0.,-1.)); +#365206 = ORIENTED_EDGE('',*,*,#365207,.F.); +#365207 = EDGE_CURVE('',#365181,#365200,#365208,.T.); +#365208 = CIRCLE('',#365209,0.139999827125); +#365209 = AXIS2_PLACEMENT_3D('',#365210,#365211,#365212); +#365210 = CARTESIAN_POINT('',(146.27999982712,-120.6199998271,0.)); +#365211 = DIRECTION('',(0.,0.,-1.)); +#365212 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#365213 = CYLINDRICAL_SURFACE('',#365214,0.139999827125); +#365214 = AXIS2_PLACEMENT_3D('',#365215,#365216,#365217); +#365215 = CARTESIAN_POINT('',(146.27999982712,-120.6199998271,0.)); +#365216 = DIRECTION('',(-0.,-0.,1.)); +#365217 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#365218 = ADVANCED_FACE('',(#365219),#365244,.F.); +#365219 = FACE_BOUND('',#365220,.F.); +#365220 = EDGE_LOOP('',(#365221,#365222,#365230,#365238)); +#365221 = ORIENTED_EDGE('',*,*,#365199,.T.); +#365222 = ORIENTED_EDGE('',*,*,#365223,.T.); +#365223 = EDGE_CURVE('',#365191,#365224,#365226,.T.); +#365224 = VERTEX_POINT('',#365225); +#365225 = CARTESIAN_POINT('',(146.62,-120.48,-4.E-02)); +#365226 = LINE('',#365227,#365228); +#365227 = CARTESIAN_POINT('',(146.28,-120.48,-4.E-02)); +#365228 = VECTOR('',#365229,1.); +#365229 = DIRECTION('',(1.,0.,0.)); +#365230 = ORIENTED_EDGE('',*,*,#365231,.F.); +#365231 = EDGE_CURVE('',#365232,#365224,#365234,.T.); +#365232 = VERTEX_POINT('',#365233); +#365233 = CARTESIAN_POINT('',(146.62,-120.48,0.)); +#365234 = LINE('',#365235,#365236); +#365235 = CARTESIAN_POINT('',(146.62,-120.48,0.)); +#365236 = VECTOR('',#365237,1.); +#365237 = DIRECTION('',(0.,0.,-1.)); +#365238 = ORIENTED_EDGE('',*,*,#365239,.F.); +#365239 = EDGE_CURVE('',#365200,#365232,#365240,.T.); +#365240 = LINE('',#365241,#365242); +#365241 = CARTESIAN_POINT('',(146.28,-120.48,0.)); +#365242 = VECTOR('',#365243,1.); +#365243 = DIRECTION('',(1.,0.,0.)); +#365244 = PLANE('',#365245); +#365245 = AXIS2_PLACEMENT_3D('',#365246,#365247,#365248); +#365246 = CARTESIAN_POINT('',(146.28,-120.48,0.)); +#365247 = DIRECTION('',(0.,-1.,0.)); +#365248 = DIRECTION('',(1.,0.,0.)); +#365249 = ADVANCED_FACE('',(#365250),#365277,.T.); +#365250 = FACE_BOUND('',#365251,.F.); +#365251 = EDGE_LOOP('',(#365252,#365253,#365262,#365270)); +#365252 = ORIENTED_EDGE('',*,*,#365231,.T.); +#365253 = ORIENTED_EDGE('',*,*,#365254,.T.); +#365254 = EDGE_CURVE('',#365224,#365255,#365257,.T.); +#365255 = VERTEX_POINT('',#365256); +#365256 = CARTESIAN_POINT('',(146.76,-120.62,-4.E-02)); +#365257 = CIRCLE('',#365258,0.139999827125); +#365258 = AXIS2_PLACEMENT_3D('',#365259,#365260,#365261); +#365259 = CARTESIAN_POINT('',(146.62000017287,-120.6199998271,-4.E-02)); +#365260 = DIRECTION('',(0.,0.,-1.)); +#365261 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#365262 = ORIENTED_EDGE('',*,*,#365263,.F.); +#365263 = EDGE_CURVE('',#365264,#365255,#365266,.T.); +#365264 = VERTEX_POINT('',#365265); +#365265 = CARTESIAN_POINT('',(146.76,-120.62,0.)); +#365266 = LINE('',#365267,#365268); +#365267 = CARTESIAN_POINT('',(146.76,-120.62,0.)); +#365268 = VECTOR('',#365269,1.); +#365269 = DIRECTION('',(0.,0.,-1.)); +#365270 = ORIENTED_EDGE('',*,*,#365271,.F.); +#365271 = EDGE_CURVE('',#365232,#365264,#365272,.T.); +#365272 = CIRCLE('',#365273,0.139999827125); +#365273 = AXIS2_PLACEMENT_3D('',#365274,#365275,#365276); +#365274 = CARTESIAN_POINT('',(146.62000017287,-120.6199998271,0.)); +#365275 = DIRECTION('',(0.,0.,-1.)); +#365276 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#365277 = CYLINDRICAL_SURFACE('',#365278,0.139999827125); +#365278 = AXIS2_PLACEMENT_3D('',#365279,#365280,#365281); +#365279 = CARTESIAN_POINT('',(146.62000017287,-120.6199998271,0.)); +#365280 = DIRECTION('',(-0.,-0.,1.)); +#365281 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#365282 = ADVANCED_FACE('',(#365283),#365308,.F.); +#365283 = FACE_BOUND('',#365284,.F.); +#365284 = EDGE_LOOP('',(#365285,#365286,#365294,#365302)); +#365285 = ORIENTED_EDGE('',*,*,#365263,.T.); +#365286 = ORIENTED_EDGE('',*,*,#365287,.T.); +#365287 = EDGE_CURVE('',#365255,#365288,#365290,.T.); +#365288 = VERTEX_POINT('',#365289); +#365289 = CARTESIAN_POINT('',(146.76,-120.9,-4.E-02)); +#365290 = LINE('',#365291,#365292); +#365291 = CARTESIAN_POINT('',(146.76,-120.62,-4.E-02)); +#365292 = VECTOR('',#365293,1.); +#365293 = DIRECTION('',(0.,-1.,0.)); +#365294 = ORIENTED_EDGE('',*,*,#365295,.F.); +#365295 = EDGE_CURVE('',#365296,#365288,#365298,.T.); +#365296 = VERTEX_POINT('',#365297); +#365297 = CARTESIAN_POINT('',(146.76,-120.9,0.)); +#365298 = LINE('',#365299,#365300); +#365299 = CARTESIAN_POINT('',(146.76,-120.9,0.)); +#365300 = VECTOR('',#365301,1.); +#365301 = DIRECTION('',(0.,0.,-1.)); +#365302 = ORIENTED_EDGE('',*,*,#365303,.F.); +#365303 = EDGE_CURVE('',#365264,#365296,#365304,.T.); +#365304 = LINE('',#365305,#365306); +#365305 = CARTESIAN_POINT('',(146.76,-120.62,0.)); +#365306 = VECTOR('',#365307,1.); +#365307 = DIRECTION('',(0.,-1.,0.)); +#365308 = PLANE('',#365309); +#365309 = AXIS2_PLACEMENT_3D('',#365310,#365311,#365312); +#365310 = CARTESIAN_POINT('',(146.76,-120.62,0.)); +#365311 = DIRECTION('',(-1.,-0.,-0.)); +#365312 = DIRECTION('',(0.,-1.,0.)); +#365313 = ADVANCED_FACE('',(#365314),#365341,.T.); +#365314 = FACE_BOUND('',#365315,.F.); +#365315 = EDGE_LOOP('',(#365316,#365317,#365326,#365334)); +#365316 = ORIENTED_EDGE('',*,*,#365295,.T.); +#365317 = ORIENTED_EDGE('',*,*,#365318,.T.); +#365318 = EDGE_CURVE('',#365288,#365319,#365321,.T.); +#365319 = VERTEX_POINT('',#365320); +#365320 = CARTESIAN_POINT('',(146.62,-121.04,-4.E-02)); +#365321 = CIRCLE('',#365322,0.139999827125); +#365322 = AXIS2_PLACEMENT_3D('',#365323,#365324,#365325); +#365323 = CARTESIAN_POINT('',(146.62000017287,-120.9000001728,-4.E-02)); +#365324 = DIRECTION('',(0.,0.,-1.)); +#365325 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#365326 = ORIENTED_EDGE('',*,*,#365327,.F.); +#365327 = EDGE_CURVE('',#365328,#365319,#365330,.T.); +#365328 = VERTEX_POINT('',#365329); +#365329 = CARTESIAN_POINT('',(146.62,-121.04,0.)); +#365330 = LINE('',#365331,#365332); +#365331 = CARTESIAN_POINT('',(146.62,-121.04,0.)); +#365332 = VECTOR('',#365333,1.); +#365333 = DIRECTION('',(0.,0.,-1.)); +#365334 = ORIENTED_EDGE('',*,*,#365335,.F.); +#365335 = EDGE_CURVE('',#365296,#365328,#365336,.T.); +#365336 = CIRCLE('',#365337,0.139999827125); +#365337 = AXIS2_PLACEMENT_3D('',#365338,#365339,#365340); +#365338 = CARTESIAN_POINT('',(146.62000017287,-120.9000001728,0.)); +#365339 = DIRECTION('',(0.,0.,-1.)); +#365340 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#365341 = CYLINDRICAL_SURFACE('',#365342,0.139999827125); +#365342 = AXIS2_PLACEMENT_3D('',#365343,#365344,#365345); +#365343 = CARTESIAN_POINT('',(146.62000017287,-120.9000001728,0.)); +#365344 = DIRECTION('',(-0.,-0.,1.)); +#365345 = DIRECTION('',(0.999999999999,1.234820451254E-06,0.)); +#365346 = ADVANCED_FACE('',(#365347),#365372,.F.); +#365347 = FACE_BOUND('',#365348,.F.); +#365348 = EDGE_LOOP('',(#365349,#365350,#365358,#365366)); +#365349 = ORIENTED_EDGE('',*,*,#365327,.T.); +#365350 = ORIENTED_EDGE('',*,*,#365351,.T.); +#365351 = EDGE_CURVE('',#365319,#365352,#365354,.T.); +#365352 = VERTEX_POINT('',#365353); +#365353 = CARTESIAN_POINT('',(146.28,-121.04,-4.E-02)); +#365354 = LINE('',#365355,#365356); +#365355 = CARTESIAN_POINT('',(146.62,-121.04,-4.E-02)); +#365356 = VECTOR('',#365357,1.); +#365357 = DIRECTION('',(-1.,0.,0.)); +#365358 = ORIENTED_EDGE('',*,*,#365359,.F.); +#365359 = EDGE_CURVE('',#365360,#365352,#365362,.T.); +#365360 = VERTEX_POINT('',#365361); +#365361 = CARTESIAN_POINT('',(146.28,-121.04,0.)); +#365362 = LINE('',#365363,#365364); +#365363 = CARTESIAN_POINT('',(146.28,-121.04,0.)); +#365364 = VECTOR('',#365365,1.); +#365365 = DIRECTION('',(0.,0.,-1.)); +#365366 = ORIENTED_EDGE('',*,*,#365367,.F.); +#365367 = EDGE_CURVE('',#365328,#365360,#365368,.T.); +#365368 = LINE('',#365369,#365370); +#365369 = CARTESIAN_POINT('',(146.62,-121.04,0.)); +#365370 = VECTOR('',#365371,1.); +#365371 = DIRECTION('',(-1.,0.,0.)); +#365372 = PLANE('',#365373); +#365373 = AXIS2_PLACEMENT_3D('',#365374,#365375,#365376); +#365374 = CARTESIAN_POINT('',(146.62,-121.04,0.)); +#365375 = DIRECTION('',(0.,1.,0.)); +#365376 = DIRECTION('',(-1.,0.,0.)); +#365377 = ADVANCED_FACE('',(#365378),#365405,.T.); +#365378 = FACE_BOUND('',#365379,.F.); +#365379 = EDGE_LOOP('',(#365380,#365381,#365390,#365398)); +#365380 = ORIENTED_EDGE('',*,*,#365359,.T.); +#365381 = ORIENTED_EDGE('',*,*,#365382,.T.); +#365382 = EDGE_CURVE('',#365352,#365383,#365385,.T.); +#365383 = VERTEX_POINT('',#365384); +#365384 = CARTESIAN_POINT('',(146.14,-120.9,-4.E-02)); +#365385 = CIRCLE('',#365386,0.139999827125); +#365386 = AXIS2_PLACEMENT_3D('',#365387,#365388,#365389); +#365387 = CARTESIAN_POINT('',(146.27999982712,-120.9000001728,-4.E-02)); +#365388 = DIRECTION('',(0.,0.,-1.)); +#365389 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#365390 = ORIENTED_EDGE('',*,*,#365391,.F.); +#365391 = EDGE_CURVE('',#365392,#365383,#365394,.T.); +#365392 = VERTEX_POINT('',#365393); +#365393 = CARTESIAN_POINT('',(146.14,-120.9,0.)); +#365394 = LINE('',#365395,#365396); +#365395 = CARTESIAN_POINT('',(146.14,-120.9,0.)); +#365396 = VECTOR('',#365397,1.); +#365397 = DIRECTION('',(0.,0.,-1.)); +#365398 = ORIENTED_EDGE('',*,*,#365399,.F.); +#365399 = EDGE_CURVE('',#365360,#365392,#365400,.T.); +#365400 = CIRCLE('',#365401,0.139999827125); +#365401 = AXIS2_PLACEMENT_3D('',#365402,#365403,#365404); +#365402 = CARTESIAN_POINT('',(146.27999982712,-120.9000001728,0.)); +#365403 = DIRECTION('',(0.,0.,-1.)); +#365404 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#365405 = CYLINDRICAL_SURFACE('',#365406,0.139999827125); +#365406 = AXIS2_PLACEMENT_3D('',#365407,#365408,#365409); +#365407 = CARTESIAN_POINT('',(146.27999982712,-120.9000001728,0.)); +#365408 = DIRECTION('',(-0.,-0.,1.)); +#365409 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#365410 = ADVANCED_FACE('',(#365411),#365427,.F.); +#365411 = FACE_BOUND('',#365412,.F.); +#365412 = EDGE_LOOP('',(#365413,#365414,#365420,#365421)); +#365413 = ORIENTED_EDGE('',*,*,#365391,.T.); +#365414 = ORIENTED_EDGE('',*,*,#365415,.T.); +#365415 = EDGE_CURVE('',#365383,#365183,#365416,.T.); +#365416 = LINE('',#365417,#365418); +#365417 = CARTESIAN_POINT('',(146.14,-120.9,-4.E-02)); +#365418 = VECTOR('',#365419,1.); +#365419 = DIRECTION('',(0.,1.,0.)); +#365420 = ORIENTED_EDGE('',*,*,#365180,.F.); +#365421 = ORIENTED_EDGE('',*,*,#365422,.F.); +#365422 = EDGE_CURVE('',#365392,#365181,#365423,.T.); +#365423 = LINE('',#365424,#365425); +#365424 = CARTESIAN_POINT('',(146.14,-120.9,0.)); +#365425 = VECTOR('',#365426,1.); +#365426 = DIRECTION('',(0.,1.,0.)); +#365427 = PLANE('',#365428); +#365428 = AXIS2_PLACEMENT_3D('',#365429,#365430,#365431); +#365429 = CARTESIAN_POINT('',(146.14,-120.9,0.)); +#365430 = DIRECTION('',(1.,-0.,0.)); +#365431 = DIRECTION('',(0.,1.,0.)); +#365432 = ADVANCED_FACE('',(#365433),#365443,.F.); +#365433 = FACE_BOUND('',#365434,.F.); +#365434 = EDGE_LOOP('',(#365435,#365436,#365437,#365438,#365439,#365440, + #365441,#365442)); +#365435 = ORIENTED_EDGE('',*,*,#365207,.T.); +#365436 = ORIENTED_EDGE('',*,*,#365239,.T.); +#365437 = ORIENTED_EDGE('',*,*,#365271,.T.); +#365438 = ORIENTED_EDGE('',*,*,#365303,.T.); +#365439 = ORIENTED_EDGE('',*,*,#365335,.T.); +#365440 = ORIENTED_EDGE('',*,*,#365367,.T.); +#365441 = ORIENTED_EDGE('',*,*,#365399,.T.); +#365442 = ORIENTED_EDGE('',*,*,#365422,.T.); +#365443 = PLANE('',#365444); +#365444 = AXIS2_PLACEMENT_3D('',#365445,#365446,#365447); +#365445 = CARTESIAN_POINT('',(0.,0.,0.)); +#365446 = DIRECTION('',(-0.,-0.,-1.)); +#365447 = DIRECTION('',(-1.,0.,0.)); +#365448 = ADVANCED_FACE('',(#365449),#365459,.T.); +#365449 = FACE_BOUND('',#365450,.T.); +#365450 = EDGE_LOOP('',(#365451,#365452,#365453,#365454,#365455,#365456, + #365457,#365458)); +#365451 = ORIENTED_EDGE('',*,*,#365190,.T.); +#365452 = ORIENTED_EDGE('',*,*,#365223,.T.); +#365453 = ORIENTED_EDGE('',*,*,#365254,.T.); +#365454 = ORIENTED_EDGE('',*,*,#365287,.T.); +#365455 = ORIENTED_EDGE('',*,*,#365318,.T.); +#365456 = ORIENTED_EDGE('',*,*,#365351,.T.); +#365457 = ORIENTED_EDGE('',*,*,#365382,.T.); +#365458 = ORIENTED_EDGE('',*,*,#365415,.T.); +#365459 = PLANE('',#365460); +#365460 = AXIS2_PLACEMENT_3D('',#365461,#365462,#365463); +#365461 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#365462 = DIRECTION('',(-0.,-0.,-1.)); +#365463 = DIRECTION('',(-1.,0.,0.)); +#365464 = MANIFOLD_SOLID_BREP('',#365465); +#365465 = CLOSED_SHELL('',(#365466,#365508,#365539,#365572,#365603, + #365636,#365667,#365700,#365722,#365738)); +#365466 = ADVANCED_FACE('',(#365467),#365503,.T.); +#365467 = FACE_BOUND('',#365468,.F.); +#365468 = EDGE_LOOP('',(#365469,#365479,#365488,#365496)); +#365469 = ORIENTED_EDGE('',*,*,#365470,.T.); +#365470 = EDGE_CURVE('',#365471,#365473,#365475,.T.); +#365471 = VERTEX_POINT('',#365472); +#365472 = CARTESIAN_POINT('',(147.7625,-121.75,0.)); +#365473 = VERTEX_POINT('',#365474); +#365474 = CARTESIAN_POINT('',(147.7625,-121.75,-4.E-02)); +#365475 = LINE('',#365476,#365477); +#365476 = CARTESIAN_POINT('',(147.7625,-121.75,0.)); +#365477 = VECTOR('',#365478,1.); +#365478 = DIRECTION('',(0.,0.,-1.)); +#365479 = ORIENTED_EDGE('',*,*,#365480,.T.); +#365480 = EDGE_CURVE('',#365473,#365481,#365483,.T.); +#365481 = VERTEX_POINT('',#365482); +#365482 = CARTESIAN_POINT('',(147.9125,-121.6,-4.E-02)); +#365483 = CIRCLE('',#365484,0.150000058649); +#365484 = AXIS2_PLACEMENT_3D('',#365485,#365486,#365487); +#365485 = CARTESIAN_POINT('',(147.91250005864,-121.7500000586,-4.E-02)); +#365486 = DIRECTION('',(0.,0.,-1.)); +#365487 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#365488 = ORIENTED_EDGE('',*,*,#365489,.F.); +#365489 = EDGE_CURVE('',#365490,#365481,#365492,.T.); +#365490 = VERTEX_POINT('',#365491); +#365491 = CARTESIAN_POINT('',(147.9125,-121.6,0.)); +#365492 = LINE('',#365493,#365494); +#365493 = CARTESIAN_POINT('',(147.9125,-121.6,0.)); +#365494 = VECTOR('',#365495,1.); +#365495 = DIRECTION('',(0.,0.,-1.)); +#365496 = ORIENTED_EDGE('',*,*,#365497,.F.); +#365497 = EDGE_CURVE('',#365471,#365490,#365498,.T.); +#365498 = CIRCLE('',#365499,0.150000058649); +#365499 = AXIS2_PLACEMENT_3D('',#365500,#365501,#365502); +#365500 = CARTESIAN_POINT('',(147.91250005864,-121.7500000586,0.)); +#365501 = DIRECTION('',(0.,0.,-1.)); +#365502 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#365503 = CYLINDRICAL_SURFACE('',#365504,0.150000058649); +#365504 = AXIS2_PLACEMENT_3D('',#365505,#365506,#365507); +#365505 = CARTESIAN_POINT('',(147.91250005864,-121.7500000586,0.)); +#365506 = DIRECTION('',(-0.,-0.,1.)); +#365507 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#365508 = ADVANCED_FACE('',(#365509),#365534,.F.); +#365509 = FACE_BOUND('',#365510,.F.); +#365510 = EDGE_LOOP('',(#365511,#365512,#365520,#365528)); +#365511 = ORIENTED_EDGE('',*,*,#365489,.T.); +#365512 = ORIENTED_EDGE('',*,*,#365513,.T.); +#365513 = EDGE_CURVE('',#365481,#365514,#365516,.T.); +#365514 = VERTEX_POINT('',#365515); +#365515 = CARTESIAN_POINT('',(149.0875,-121.6,-4.E-02)); +#365516 = LINE('',#365517,#365518); +#365517 = CARTESIAN_POINT('',(147.9125,-121.6,-4.E-02)); +#365518 = VECTOR('',#365519,1.); +#365519 = DIRECTION('',(1.,0.,0.)); +#365520 = ORIENTED_EDGE('',*,*,#365521,.F.); +#365521 = EDGE_CURVE('',#365522,#365514,#365524,.T.); +#365522 = VERTEX_POINT('',#365523); +#365523 = CARTESIAN_POINT('',(149.0875,-121.6,0.)); +#365524 = LINE('',#365525,#365526); +#365525 = CARTESIAN_POINT('',(149.0875,-121.6,0.)); +#365526 = VECTOR('',#365527,1.); +#365527 = DIRECTION('',(0.,0.,-1.)); +#365528 = ORIENTED_EDGE('',*,*,#365529,.F.); +#365529 = EDGE_CURVE('',#365490,#365522,#365530,.T.); +#365530 = LINE('',#365531,#365532); +#365531 = CARTESIAN_POINT('',(147.9125,-121.6,0.)); +#365532 = VECTOR('',#365533,1.); +#365533 = DIRECTION('',(1.,0.,0.)); +#365534 = PLANE('',#365535); +#365535 = AXIS2_PLACEMENT_3D('',#365536,#365537,#365538); +#365536 = CARTESIAN_POINT('',(147.9125,-121.6,0.)); +#365537 = DIRECTION('',(0.,-1.,0.)); +#365538 = DIRECTION('',(1.,0.,0.)); +#365539 = ADVANCED_FACE('',(#365540),#365567,.T.); +#365540 = FACE_BOUND('',#365541,.F.); +#365541 = EDGE_LOOP('',(#365542,#365543,#365552,#365560)); +#365542 = ORIENTED_EDGE('',*,*,#365521,.T.); +#365543 = ORIENTED_EDGE('',*,*,#365544,.T.); +#365544 = EDGE_CURVE('',#365514,#365545,#365547,.T.); +#365545 = VERTEX_POINT('',#365546); +#365546 = CARTESIAN_POINT('',(149.2375,-121.75,-4.E-02)); +#365547 = CIRCLE('',#365548,0.150000058649); +#365548 = AXIS2_PLACEMENT_3D('',#365549,#365550,#365551); +#365549 = CARTESIAN_POINT('',(149.08749994135,-121.7500000586,-4.E-02)); +#365550 = DIRECTION('',(0.,0.,-1.)); +#365551 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#365552 = ORIENTED_EDGE('',*,*,#365553,.F.); +#365553 = EDGE_CURVE('',#365554,#365545,#365556,.T.); +#365554 = VERTEX_POINT('',#365555); +#365555 = CARTESIAN_POINT('',(149.2375,-121.75,0.)); +#365556 = LINE('',#365557,#365558); +#365557 = CARTESIAN_POINT('',(149.2375,-121.75,0.)); +#365558 = VECTOR('',#365559,1.); +#365559 = DIRECTION('',(0.,0.,-1.)); +#365560 = ORIENTED_EDGE('',*,*,#365561,.F.); +#365561 = EDGE_CURVE('',#365522,#365554,#365562,.T.); +#365562 = CIRCLE('',#365563,0.150000058649); +#365563 = AXIS2_PLACEMENT_3D('',#365564,#365565,#365566); +#365564 = CARTESIAN_POINT('',(149.08749994135,-121.7500000586,0.)); +#365565 = DIRECTION('',(0.,0.,-1.)); +#365566 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#365567 = CYLINDRICAL_SURFACE('',#365568,0.150000058649); +#365568 = AXIS2_PLACEMENT_3D('',#365569,#365570,#365571); +#365569 = CARTESIAN_POINT('',(149.08749994135,-121.7500000586,0.)); +#365570 = DIRECTION('',(-0.,-0.,1.)); +#365571 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#365572 = ADVANCED_FACE('',(#365573),#365598,.F.); +#365573 = FACE_BOUND('',#365574,.F.); +#365574 = EDGE_LOOP('',(#365575,#365576,#365584,#365592)); +#365575 = ORIENTED_EDGE('',*,*,#365553,.T.); +#365576 = ORIENTED_EDGE('',*,*,#365577,.T.); +#365577 = EDGE_CURVE('',#365545,#365578,#365580,.T.); +#365578 = VERTEX_POINT('',#365579); +#365579 = CARTESIAN_POINT('',(149.2375,-122.05,-4.E-02)); +#365580 = LINE('',#365581,#365582); +#365581 = CARTESIAN_POINT('',(149.2375,-121.75,-4.E-02)); +#365582 = VECTOR('',#365583,1.); +#365583 = DIRECTION('',(0.,-1.,0.)); +#365584 = ORIENTED_EDGE('',*,*,#365585,.F.); +#365585 = EDGE_CURVE('',#365586,#365578,#365588,.T.); +#365586 = VERTEX_POINT('',#365587); +#365587 = CARTESIAN_POINT('',(149.2375,-122.05,0.)); +#365588 = LINE('',#365589,#365590); +#365589 = CARTESIAN_POINT('',(149.2375,-122.05,0.)); +#365590 = VECTOR('',#365591,1.); +#365591 = DIRECTION('',(0.,0.,-1.)); +#365592 = ORIENTED_EDGE('',*,*,#365593,.F.); +#365593 = EDGE_CURVE('',#365554,#365586,#365594,.T.); +#365594 = LINE('',#365595,#365596); +#365595 = CARTESIAN_POINT('',(149.2375,-121.75,0.)); +#365596 = VECTOR('',#365597,1.); +#365597 = DIRECTION('',(0.,-1.,0.)); +#365598 = PLANE('',#365599); +#365599 = AXIS2_PLACEMENT_3D('',#365600,#365601,#365602); +#365600 = CARTESIAN_POINT('',(149.2375,-121.75,0.)); +#365601 = DIRECTION('',(-1.,-0.,-0.)); +#365602 = DIRECTION('',(0.,-1.,0.)); +#365603 = ADVANCED_FACE('',(#365604),#365631,.T.); +#365604 = FACE_BOUND('',#365605,.F.); +#365605 = EDGE_LOOP('',(#365606,#365607,#365616,#365624)); +#365606 = ORIENTED_EDGE('',*,*,#365585,.T.); +#365607 = ORIENTED_EDGE('',*,*,#365608,.T.); +#365608 = EDGE_CURVE('',#365578,#365609,#365611,.T.); +#365609 = VERTEX_POINT('',#365610); +#365610 = CARTESIAN_POINT('',(149.0875,-122.2,-4.E-02)); +#365611 = CIRCLE('',#365612,0.150000058649); +#365612 = AXIS2_PLACEMENT_3D('',#365613,#365614,#365615); +#365613 = CARTESIAN_POINT('',(149.08749994135,-122.0499999413,-4.E-02)); +#365614 = DIRECTION('',(0.,0.,-1.)); +#365615 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#365616 = ORIENTED_EDGE('',*,*,#365617,.F.); +#365617 = EDGE_CURVE('',#365618,#365609,#365620,.T.); +#365618 = VERTEX_POINT('',#365619); +#365619 = CARTESIAN_POINT('',(149.0875,-122.2,0.)); +#365620 = LINE('',#365621,#365622); +#365621 = CARTESIAN_POINT('',(149.0875,-122.2,0.)); +#365622 = VECTOR('',#365623,1.); +#365623 = DIRECTION('',(0.,0.,-1.)); +#365624 = ORIENTED_EDGE('',*,*,#365625,.F.); +#365625 = EDGE_CURVE('',#365586,#365618,#365626,.T.); +#365626 = CIRCLE('',#365627,0.150000058649); +#365627 = AXIS2_PLACEMENT_3D('',#365628,#365629,#365630); +#365628 = CARTESIAN_POINT('',(149.08749994135,-122.0499999413,0.)); +#365629 = DIRECTION('',(0.,0.,-1.)); +#365630 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#365631 = CYLINDRICAL_SURFACE('',#365632,0.150000058649); +#365632 = AXIS2_PLACEMENT_3D('',#365633,#365634,#365635); +#365633 = CARTESIAN_POINT('',(149.08749994135,-122.0499999413,0.)); +#365634 = DIRECTION('',(-0.,-0.,1.)); +#365635 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#365636 = ADVANCED_FACE('',(#365637),#365662,.F.); +#365637 = FACE_BOUND('',#365638,.F.); +#365638 = EDGE_LOOP('',(#365639,#365640,#365648,#365656)); +#365639 = ORIENTED_EDGE('',*,*,#365617,.T.); +#365640 = ORIENTED_EDGE('',*,*,#365641,.T.); +#365641 = EDGE_CURVE('',#365609,#365642,#365644,.T.); +#365642 = VERTEX_POINT('',#365643); +#365643 = CARTESIAN_POINT('',(147.9125,-122.2,-4.E-02)); +#365644 = LINE('',#365645,#365646); +#365645 = CARTESIAN_POINT('',(149.0875,-122.2,-4.E-02)); +#365646 = VECTOR('',#365647,1.); +#365647 = DIRECTION('',(-1.,0.,0.)); +#365648 = ORIENTED_EDGE('',*,*,#365649,.F.); +#365649 = EDGE_CURVE('',#365650,#365642,#365652,.T.); +#365650 = VERTEX_POINT('',#365651); +#365651 = CARTESIAN_POINT('',(147.9125,-122.2,0.)); +#365652 = LINE('',#365653,#365654); +#365653 = CARTESIAN_POINT('',(147.9125,-122.2,0.)); +#365654 = VECTOR('',#365655,1.); +#365655 = DIRECTION('',(0.,0.,-1.)); +#365656 = ORIENTED_EDGE('',*,*,#365657,.F.); +#365657 = EDGE_CURVE('',#365618,#365650,#365658,.T.); +#365658 = LINE('',#365659,#365660); +#365659 = CARTESIAN_POINT('',(149.0875,-122.2,0.)); +#365660 = VECTOR('',#365661,1.); +#365661 = DIRECTION('',(-1.,0.,0.)); +#365662 = PLANE('',#365663); +#365663 = AXIS2_PLACEMENT_3D('',#365664,#365665,#365666); +#365664 = CARTESIAN_POINT('',(149.0875,-122.2,0.)); +#365665 = DIRECTION('',(0.,1.,0.)); +#365666 = DIRECTION('',(-1.,0.,0.)); +#365667 = ADVANCED_FACE('',(#365668),#365695,.T.); +#365668 = FACE_BOUND('',#365669,.F.); +#365669 = EDGE_LOOP('',(#365670,#365671,#365680,#365688)); +#365670 = ORIENTED_EDGE('',*,*,#365649,.T.); +#365671 = ORIENTED_EDGE('',*,*,#365672,.T.); +#365672 = EDGE_CURVE('',#365642,#365673,#365675,.T.); +#365673 = VERTEX_POINT('',#365674); +#365674 = CARTESIAN_POINT('',(147.7625,-122.05,-4.E-02)); +#365675 = CIRCLE('',#365676,0.150000058649); +#365676 = AXIS2_PLACEMENT_3D('',#365677,#365678,#365679); +#365677 = CARTESIAN_POINT('',(147.91250005864,-122.0499999413,-4.E-02)); +#365678 = DIRECTION('',(0.,0.,-1.)); +#365679 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#365680 = ORIENTED_EDGE('',*,*,#365681,.F.); +#365681 = EDGE_CURVE('',#365682,#365673,#365684,.T.); +#365682 = VERTEX_POINT('',#365683); +#365683 = CARTESIAN_POINT('',(147.7625,-122.05,0.)); +#365684 = LINE('',#365685,#365686); +#365685 = CARTESIAN_POINT('',(147.7625,-122.05,0.)); +#365686 = VECTOR('',#365687,1.); +#365687 = DIRECTION('',(0.,0.,-1.)); +#365688 = ORIENTED_EDGE('',*,*,#365689,.F.); +#365689 = EDGE_CURVE('',#365650,#365682,#365690,.T.); +#365690 = CIRCLE('',#365691,0.150000058649); +#365691 = AXIS2_PLACEMENT_3D('',#365692,#365693,#365694); +#365692 = CARTESIAN_POINT('',(147.91250005864,-122.0499999413,0.)); +#365693 = DIRECTION('',(0.,0.,-1.)); +#365694 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#365695 = CYLINDRICAL_SURFACE('',#365696,0.150000058649); +#365696 = AXIS2_PLACEMENT_3D('',#365697,#365698,#365699); +#365697 = CARTESIAN_POINT('',(147.91250005864,-122.0499999413,0.)); +#365698 = DIRECTION('',(-0.,-0.,1.)); +#365699 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#365700 = ADVANCED_FACE('',(#365701),#365717,.F.); +#365701 = FACE_BOUND('',#365702,.F.); +#365702 = EDGE_LOOP('',(#365703,#365704,#365710,#365711)); +#365703 = ORIENTED_EDGE('',*,*,#365681,.T.); +#365704 = ORIENTED_EDGE('',*,*,#365705,.T.); +#365705 = EDGE_CURVE('',#365673,#365473,#365706,.T.); +#365706 = LINE('',#365707,#365708); +#365707 = CARTESIAN_POINT('',(147.7625,-122.05,-4.E-02)); +#365708 = VECTOR('',#365709,1.); +#365709 = DIRECTION('',(0.,1.,0.)); +#365710 = ORIENTED_EDGE('',*,*,#365470,.F.); +#365711 = ORIENTED_EDGE('',*,*,#365712,.F.); +#365712 = EDGE_CURVE('',#365682,#365471,#365713,.T.); +#365713 = LINE('',#365714,#365715); +#365714 = CARTESIAN_POINT('',(147.7625,-122.05,0.)); +#365715 = VECTOR('',#365716,1.); +#365716 = DIRECTION('',(0.,1.,0.)); +#365717 = PLANE('',#365718); +#365718 = AXIS2_PLACEMENT_3D('',#365719,#365720,#365721); +#365719 = CARTESIAN_POINT('',(147.7625,-122.05,0.)); +#365720 = DIRECTION('',(1.,-0.,0.)); +#365721 = DIRECTION('',(0.,1.,0.)); +#365722 = ADVANCED_FACE('',(#365723),#365733,.F.); +#365723 = FACE_BOUND('',#365724,.F.); +#365724 = EDGE_LOOP('',(#365725,#365726,#365727,#365728,#365729,#365730, + #365731,#365732)); +#365725 = ORIENTED_EDGE('',*,*,#365497,.T.); +#365726 = ORIENTED_EDGE('',*,*,#365529,.T.); +#365727 = ORIENTED_EDGE('',*,*,#365561,.T.); +#365728 = ORIENTED_EDGE('',*,*,#365593,.T.); +#365729 = ORIENTED_EDGE('',*,*,#365625,.T.); +#365730 = ORIENTED_EDGE('',*,*,#365657,.T.); +#365731 = ORIENTED_EDGE('',*,*,#365689,.T.); +#365732 = ORIENTED_EDGE('',*,*,#365712,.T.); +#365733 = PLANE('',#365734); +#365734 = AXIS2_PLACEMENT_3D('',#365735,#365736,#365737); +#365735 = CARTESIAN_POINT('',(0.,0.,0.)); +#365736 = DIRECTION('',(-0.,-0.,-1.)); +#365737 = DIRECTION('',(-1.,0.,0.)); +#365738 = ADVANCED_FACE('',(#365739),#365749,.T.); +#365739 = FACE_BOUND('',#365740,.T.); +#365740 = EDGE_LOOP('',(#365741,#365742,#365743,#365744,#365745,#365746, + #365747,#365748)); +#365741 = ORIENTED_EDGE('',*,*,#365480,.T.); +#365742 = ORIENTED_EDGE('',*,*,#365513,.T.); +#365743 = ORIENTED_EDGE('',*,*,#365544,.T.); +#365744 = ORIENTED_EDGE('',*,*,#365577,.T.); +#365745 = ORIENTED_EDGE('',*,*,#365608,.T.); +#365746 = ORIENTED_EDGE('',*,*,#365641,.T.); +#365747 = ORIENTED_EDGE('',*,*,#365672,.T.); +#365748 = ORIENTED_EDGE('',*,*,#365705,.T.); +#365749 = PLANE('',#365750); +#365750 = AXIS2_PLACEMENT_3D('',#365751,#365752,#365753); +#365751 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#365752 = DIRECTION('',(-0.,-0.,-1.)); +#365753 = DIRECTION('',(-1.,0.,0.)); +#365754 = MANIFOLD_SOLID_BREP('',#365755); +#365755 = CLOSED_SHELL('',(#365756,#365798,#365829,#365862,#365893, + #365926,#365957,#365990,#366012,#366028)); +#365756 = ADVANCED_FACE('',(#365757),#365793,.T.); +#365757 = FACE_BOUND('',#365758,.F.); +#365758 = EDGE_LOOP('',(#365759,#365769,#365778,#365786)); +#365759 = ORIENTED_EDGE('',*,*,#365760,.T.); +#365760 = EDGE_CURVE('',#365761,#365763,#365765,.T.); +#365761 = VERTEX_POINT('',#365762); +#365762 = CARTESIAN_POINT('',(143.4,-121.425,0.)); +#365763 = VERTEX_POINT('',#365764); +#365764 = CARTESIAN_POINT('',(143.4,-121.425,-4.E-02)); +#365765 = LINE('',#365766,#365767); +#365766 = CARTESIAN_POINT('',(143.4,-121.425,0.)); +#365767 = VECTOR('',#365768,1.); +#365768 = DIRECTION('',(0.,0.,-1.)); +#365769 = ORIENTED_EDGE('',*,*,#365770,.T.); +#365770 = EDGE_CURVE('',#365763,#365771,#365773,.T.); +#365771 = VERTEX_POINT('',#365772); +#365772 = CARTESIAN_POINT('',(143.625,-121.2,-4.E-02)); +#365773 = CIRCLE('',#365774,0.225000087974); +#365774 = AXIS2_PLACEMENT_3D('',#365775,#365776,#365777); +#365775 = CARTESIAN_POINT('',(143.62500008797,-121.4250000879,-4.E-02)); +#365776 = DIRECTION('',(0.,0.,-1.)); +#365777 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#365778 = ORIENTED_EDGE('',*,*,#365779,.F.); +#365779 = EDGE_CURVE('',#365780,#365771,#365782,.T.); +#365780 = VERTEX_POINT('',#365781); +#365781 = CARTESIAN_POINT('',(143.625,-121.2,0.)); +#365782 = LINE('',#365783,#365784); +#365783 = CARTESIAN_POINT('',(143.625,-121.2,0.)); +#365784 = VECTOR('',#365785,1.); +#365785 = DIRECTION('',(0.,0.,-1.)); +#365786 = ORIENTED_EDGE('',*,*,#365787,.F.); +#365787 = EDGE_CURVE('',#365761,#365780,#365788,.T.); +#365788 = CIRCLE('',#365789,0.225000087974); +#365789 = AXIS2_PLACEMENT_3D('',#365790,#365791,#365792); +#365790 = CARTESIAN_POINT('',(143.62500008797,-121.4250000879,0.)); +#365791 = DIRECTION('',(0.,0.,-1.)); +#365792 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#365793 = CYLINDRICAL_SURFACE('',#365794,0.225000087974); +#365794 = AXIS2_PLACEMENT_3D('',#365795,#365796,#365797); +#365795 = CARTESIAN_POINT('',(143.62500008797,-121.4250000879,0.)); +#365796 = DIRECTION('',(-0.,-0.,1.)); +#365797 = DIRECTION('',(-1.,3.909953458166E-07,0.)); +#365798 = ADVANCED_FACE('',(#365799),#365824,.F.); +#365799 = FACE_BOUND('',#365800,.F.); +#365800 = EDGE_LOOP('',(#365801,#365802,#365810,#365818)); +#365801 = ORIENTED_EDGE('',*,*,#365779,.T.); +#365802 = ORIENTED_EDGE('',*,*,#365803,.T.); +#365803 = EDGE_CURVE('',#365771,#365804,#365806,.T.); +#365804 = VERTEX_POINT('',#365805); +#365805 = CARTESIAN_POINT('',(144.375,-121.2,-4.E-02)); +#365806 = LINE('',#365807,#365808); +#365807 = CARTESIAN_POINT('',(143.625,-121.2,-4.E-02)); +#365808 = VECTOR('',#365809,1.); +#365809 = DIRECTION('',(1.,0.,0.)); +#365810 = ORIENTED_EDGE('',*,*,#365811,.F.); +#365811 = EDGE_CURVE('',#365812,#365804,#365814,.T.); +#365812 = VERTEX_POINT('',#365813); +#365813 = CARTESIAN_POINT('',(144.375,-121.2,0.)); +#365814 = LINE('',#365815,#365816); +#365815 = CARTESIAN_POINT('',(144.375,-121.2,0.)); +#365816 = VECTOR('',#365817,1.); +#365817 = DIRECTION('',(0.,0.,-1.)); +#365818 = ORIENTED_EDGE('',*,*,#365819,.F.); +#365819 = EDGE_CURVE('',#365780,#365812,#365820,.T.); +#365820 = LINE('',#365821,#365822); +#365821 = CARTESIAN_POINT('',(143.625,-121.2,0.)); +#365822 = VECTOR('',#365823,1.); +#365823 = DIRECTION('',(1.,0.,0.)); +#365824 = PLANE('',#365825); +#365825 = AXIS2_PLACEMENT_3D('',#365826,#365827,#365828); +#365826 = CARTESIAN_POINT('',(143.625,-121.2,0.)); +#365827 = DIRECTION('',(0.,-1.,0.)); +#365828 = DIRECTION('',(1.,0.,0.)); +#365829 = ADVANCED_FACE('',(#365830),#365857,.T.); +#365830 = FACE_BOUND('',#365831,.F.); +#365831 = EDGE_LOOP('',(#365832,#365833,#365842,#365850)); +#365832 = ORIENTED_EDGE('',*,*,#365811,.T.); +#365833 = ORIENTED_EDGE('',*,*,#365834,.T.); +#365834 = EDGE_CURVE('',#365804,#365835,#365837,.T.); +#365835 = VERTEX_POINT('',#365836); +#365836 = CARTESIAN_POINT('',(144.6,-121.425,-4.E-02)); +#365837 = CIRCLE('',#365838,0.225000087974); +#365838 = AXIS2_PLACEMENT_3D('',#365839,#365840,#365841); +#365839 = CARTESIAN_POINT('',(144.37499991202,-121.4250000879,-4.E-02)); +#365840 = DIRECTION('',(0.,0.,-1.)); +#365841 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#365842 = ORIENTED_EDGE('',*,*,#365843,.F.); +#365843 = EDGE_CURVE('',#365844,#365835,#365846,.T.); +#365844 = VERTEX_POINT('',#365845); +#365845 = CARTESIAN_POINT('',(144.6,-121.425,0.)); +#365846 = LINE('',#365847,#365848); +#365847 = CARTESIAN_POINT('',(144.6,-121.425,0.)); +#365848 = VECTOR('',#365849,1.); +#365849 = DIRECTION('',(0.,0.,-1.)); +#365850 = ORIENTED_EDGE('',*,*,#365851,.F.); +#365851 = EDGE_CURVE('',#365812,#365844,#365852,.T.); +#365852 = CIRCLE('',#365853,0.225000087974); +#365853 = AXIS2_PLACEMENT_3D('',#365854,#365855,#365856); +#365854 = CARTESIAN_POINT('',(144.37499991202,-121.4250000879,0.)); +#365855 = DIRECTION('',(0.,0.,-1.)); +#365856 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#365857 = CYLINDRICAL_SURFACE('',#365858,0.225000087974); +#365858 = AXIS2_PLACEMENT_3D('',#365859,#365860,#365861); +#365859 = CARTESIAN_POINT('',(144.37499991202,-121.4250000879,0.)); +#365860 = DIRECTION('',(-0.,-0.,1.)); +#365861 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#365862 = ADVANCED_FACE('',(#365863),#365888,.F.); +#365863 = FACE_BOUND('',#365864,.F.); +#365864 = EDGE_LOOP('',(#365865,#365866,#365874,#365882)); +#365865 = ORIENTED_EDGE('',*,*,#365843,.T.); +#365866 = ORIENTED_EDGE('',*,*,#365867,.T.); +#365867 = EDGE_CURVE('',#365835,#365868,#365870,.T.); +#365868 = VERTEX_POINT('',#365869); +#365869 = CARTESIAN_POINT('',(144.6,-121.875,-4.E-02)); +#365870 = LINE('',#365871,#365872); +#365871 = CARTESIAN_POINT('',(144.6,-121.425,-4.E-02)); +#365872 = VECTOR('',#365873,1.); +#365873 = DIRECTION('',(0.,-1.,0.)); +#365874 = ORIENTED_EDGE('',*,*,#365875,.F.); +#365875 = EDGE_CURVE('',#365876,#365868,#365878,.T.); +#365876 = VERTEX_POINT('',#365877); +#365877 = CARTESIAN_POINT('',(144.6,-121.875,0.)); +#365878 = LINE('',#365879,#365880); +#365879 = CARTESIAN_POINT('',(144.6,-121.875,0.)); +#365880 = VECTOR('',#365881,1.); +#365881 = DIRECTION('',(0.,0.,-1.)); +#365882 = ORIENTED_EDGE('',*,*,#365883,.F.); +#365883 = EDGE_CURVE('',#365844,#365876,#365884,.T.); +#365884 = LINE('',#365885,#365886); +#365885 = CARTESIAN_POINT('',(144.6,-121.425,0.)); +#365886 = VECTOR('',#365887,1.); +#365887 = DIRECTION('',(0.,-1.,0.)); +#365888 = PLANE('',#365889); +#365889 = AXIS2_PLACEMENT_3D('',#365890,#365891,#365892); +#365890 = CARTESIAN_POINT('',(144.6,-121.425,0.)); +#365891 = DIRECTION('',(-1.,-0.,-0.)); +#365892 = DIRECTION('',(0.,-1.,0.)); +#365893 = ADVANCED_FACE('',(#365894),#365921,.T.); +#365894 = FACE_BOUND('',#365895,.F.); +#365895 = EDGE_LOOP('',(#365896,#365897,#365906,#365914)); +#365896 = ORIENTED_EDGE('',*,*,#365875,.T.); +#365897 = ORIENTED_EDGE('',*,*,#365898,.T.); +#365898 = EDGE_CURVE('',#365868,#365899,#365901,.T.); +#365899 = VERTEX_POINT('',#365900); +#365900 = CARTESIAN_POINT('',(144.375,-122.1,-4.E-02)); +#365901 = CIRCLE('',#365902,0.225000087974); +#365902 = AXIS2_PLACEMENT_3D('',#365903,#365904,#365905); +#365903 = CARTESIAN_POINT('',(144.37499991202,-121.874999912,-4.E-02)); +#365904 = DIRECTION('',(0.,0.,-1.)); +#365905 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365906 = ORIENTED_EDGE('',*,*,#365907,.F.); +#365907 = EDGE_CURVE('',#365908,#365899,#365910,.T.); +#365908 = VERTEX_POINT('',#365909); +#365909 = CARTESIAN_POINT('',(144.375,-122.1,0.)); +#365910 = LINE('',#365911,#365912); +#365911 = CARTESIAN_POINT('',(144.375,-122.1,0.)); +#365912 = VECTOR('',#365913,1.); +#365913 = DIRECTION('',(0.,0.,-1.)); +#365914 = ORIENTED_EDGE('',*,*,#365915,.F.); +#365915 = EDGE_CURVE('',#365876,#365908,#365916,.T.); +#365916 = CIRCLE('',#365917,0.225000087974); +#365917 = AXIS2_PLACEMENT_3D('',#365918,#365919,#365920); +#365918 = CARTESIAN_POINT('',(144.37499991202,-121.874999912,0.)); +#365919 = DIRECTION('',(0.,0.,-1.)); +#365920 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365921 = CYLINDRICAL_SURFACE('',#365922,0.225000087974); +#365922 = AXIS2_PLACEMENT_3D('',#365923,#365924,#365925); +#365923 = CARTESIAN_POINT('',(144.37499991202,-121.874999912,0.)); +#365924 = DIRECTION('',(-0.,-0.,1.)); +#365925 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#365926 = ADVANCED_FACE('',(#365927),#365952,.F.); +#365927 = FACE_BOUND('',#365928,.F.); +#365928 = EDGE_LOOP('',(#365929,#365930,#365938,#365946)); +#365929 = ORIENTED_EDGE('',*,*,#365907,.T.); +#365930 = ORIENTED_EDGE('',*,*,#365931,.T.); +#365931 = EDGE_CURVE('',#365899,#365932,#365934,.T.); +#365932 = VERTEX_POINT('',#365933); +#365933 = CARTESIAN_POINT('',(143.625,-122.1,-4.E-02)); +#365934 = LINE('',#365935,#365936); +#365935 = CARTESIAN_POINT('',(144.375,-122.1,-4.E-02)); +#365936 = VECTOR('',#365937,1.); +#365937 = DIRECTION('',(-1.,0.,0.)); +#365938 = ORIENTED_EDGE('',*,*,#365939,.F.); +#365939 = EDGE_CURVE('',#365940,#365932,#365942,.T.); +#365940 = VERTEX_POINT('',#365941); +#365941 = CARTESIAN_POINT('',(143.625,-122.1,0.)); +#365942 = LINE('',#365943,#365944); +#365943 = CARTESIAN_POINT('',(143.625,-122.1,0.)); +#365944 = VECTOR('',#365945,1.); +#365945 = DIRECTION('',(0.,0.,-1.)); +#365946 = ORIENTED_EDGE('',*,*,#365947,.F.); +#365947 = EDGE_CURVE('',#365908,#365940,#365948,.T.); +#365948 = LINE('',#365949,#365950); +#365949 = CARTESIAN_POINT('',(144.375,-122.1,0.)); +#365950 = VECTOR('',#365951,1.); +#365951 = DIRECTION('',(-1.,0.,0.)); +#365952 = PLANE('',#365953); +#365953 = AXIS2_PLACEMENT_3D('',#365954,#365955,#365956); +#365954 = CARTESIAN_POINT('',(144.375,-122.1,0.)); +#365955 = DIRECTION('',(0.,1.,0.)); +#365956 = DIRECTION('',(-1.,0.,0.)); +#365957 = ADVANCED_FACE('',(#365958),#365985,.T.); +#365958 = FACE_BOUND('',#365959,.F.); +#365959 = EDGE_LOOP('',(#365960,#365961,#365970,#365978)); +#365960 = ORIENTED_EDGE('',*,*,#365939,.T.); +#365961 = ORIENTED_EDGE('',*,*,#365962,.T.); +#365962 = EDGE_CURVE('',#365932,#365963,#365965,.T.); +#365963 = VERTEX_POINT('',#365964); +#365964 = CARTESIAN_POINT('',(143.4,-121.875,-4.E-02)); +#365965 = CIRCLE('',#365966,0.225000087974); +#365966 = AXIS2_PLACEMENT_3D('',#365967,#365968,#365969); +#365967 = CARTESIAN_POINT('',(143.62500008797,-121.874999912,-4.E-02)); +#365968 = DIRECTION('',(0.,0.,-1.)); +#365969 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365970 = ORIENTED_EDGE('',*,*,#365971,.F.); +#365971 = EDGE_CURVE('',#365972,#365963,#365974,.T.); +#365972 = VERTEX_POINT('',#365973); +#365973 = CARTESIAN_POINT('',(143.4,-121.875,0.)); +#365974 = LINE('',#365975,#365976); +#365975 = CARTESIAN_POINT('',(143.4,-121.875,0.)); +#365976 = VECTOR('',#365977,1.); +#365977 = DIRECTION('',(0.,0.,-1.)); +#365978 = ORIENTED_EDGE('',*,*,#365979,.F.); +#365979 = EDGE_CURVE('',#365940,#365972,#365980,.T.); +#365980 = CIRCLE('',#365981,0.225000087974); +#365981 = AXIS2_PLACEMENT_3D('',#365982,#365983,#365984); +#365982 = CARTESIAN_POINT('',(143.62500008797,-121.874999912,0.)); +#365983 = DIRECTION('',(0.,0.,-1.)); +#365984 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365985 = CYLINDRICAL_SURFACE('',#365986,0.225000087974); +#365986 = AXIS2_PLACEMENT_3D('',#365987,#365988,#365989); +#365987 = CARTESIAN_POINT('',(143.62500008797,-121.874999912,0.)); +#365988 = DIRECTION('',(-0.,-0.,1.)); +#365989 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#365990 = ADVANCED_FACE('',(#365991),#366007,.F.); +#365991 = FACE_BOUND('',#365992,.F.); +#365992 = EDGE_LOOP('',(#365993,#365994,#366000,#366001)); +#365993 = ORIENTED_EDGE('',*,*,#365971,.T.); +#365994 = ORIENTED_EDGE('',*,*,#365995,.T.); +#365995 = EDGE_CURVE('',#365963,#365763,#365996,.T.); +#365996 = LINE('',#365997,#365998); +#365997 = CARTESIAN_POINT('',(143.4,-121.875,-4.E-02)); +#365998 = VECTOR('',#365999,1.); +#365999 = DIRECTION('',(0.,1.,0.)); +#366000 = ORIENTED_EDGE('',*,*,#365760,.F.); +#366001 = ORIENTED_EDGE('',*,*,#366002,.F.); +#366002 = EDGE_CURVE('',#365972,#365761,#366003,.T.); +#366003 = LINE('',#366004,#366005); +#366004 = CARTESIAN_POINT('',(143.4,-121.875,0.)); +#366005 = VECTOR('',#366006,1.); +#366006 = DIRECTION('',(0.,1.,0.)); +#366007 = PLANE('',#366008); +#366008 = AXIS2_PLACEMENT_3D('',#366009,#366010,#366011); +#366009 = CARTESIAN_POINT('',(143.4,-121.875,0.)); +#366010 = DIRECTION('',(1.,-0.,0.)); +#366011 = DIRECTION('',(0.,1.,0.)); +#366012 = ADVANCED_FACE('',(#366013),#366023,.F.); +#366013 = FACE_BOUND('',#366014,.F.); +#366014 = EDGE_LOOP('',(#366015,#366016,#366017,#366018,#366019,#366020, + #366021,#366022)); +#366015 = ORIENTED_EDGE('',*,*,#365787,.T.); +#366016 = ORIENTED_EDGE('',*,*,#365819,.T.); +#366017 = ORIENTED_EDGE('',*,*,#365851,.T.); +#366018 = ORIENTED_EDGE('',*,*,#365883,.T.); +#366019 = ORIENTED_EDGE('',*,*,#365915,.T.); +#366020 = ORIENTED_EDGE('',*,*,#365947,.T.); +#366021 = ORIENTED_EDGE('',*,*,#365979,.T.); +#366022 = ORIENTED_EDGE('',*,*,#366002,.T.); +#366023 = PLANE('',#366024); +#366024 = AXIS2_PLACEMENT_3D('',#366025,#366026,#366027); +#366025 = CARTESIAN_POINT('',(0.,0.,0.)); +#366026 = DIRECTION('',(-0.,-0.,-1.)); +#366027 = DIRECTION('',(-1.,0.,0.)); +#366028 = ADVANCED_FACE('',(#366029),#366039,.T.); +#366029 = FACE_BOUND('',#366030,.T.); +#366030 = EDGE_LOOP('',(#366031,#366032,#366033,#366034,#366035,#366036, + #366037,#366038)); +#366031 = ORIENTED_EDGE('',*,*,#365770,.T.); +#366032 = ORIENTED_EDGE('',*,*,#365803,.T.); +#366033 = ORIENTED_EDGE('',*,*,#365834,.T.); +#366034 = ORIENTED_EDGE('',*,*,#365867,.T.); +#366035 = ORIENTED_EDGE('',*,*,#365898,.T.); +#366036 = ORIENTED_EDGE('',*,*,#365931,.T.); +#366037 = ORIENTED_EDGE('',*,*,#365962,.T.); +#366038 = ORIENTED_EDGE('',*,*,#365995,.T.); +#366039 = PLANE('',#366040); +#366040 = AXIS2_PLACEMENT_3D('',#366041,#366042,#366043); +#366041 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#366042 = DIRECTION('',(-0.,-0.,-1.)); +#366043 = DIRECTION('',(-1.,0.,0.)); +#366044 = MANIFOLD_SOLID_BREP('',#366045); +#366045 = CLOSED_SHELL('',(#366046,#366088,#366119,#366152,#366183, + #366216,#366247,#366280,#366302,#366318)); +#366046 = ADVANCED_FACE('',(#366047),#366083,.T.); +#366047 = FACE_BOUND('',#366048,.F.); +#366048 = EDGE_LOOP('',(#366049,#366059,#366068,#366076)); +#366049 = ORIENTED_EDGE('',*,*,#366050,.T.); +#366050 = EDGE_CURVE('',#366051,#366053,#366055,.T.); +#366051 = VERTEX_POINT('',#366052); +#366052 = CARTESIAN_POINT('',(145.68,-122.355,0.)); +#366053 = VERTEX_POINT('',#366054); +#366054 = CARTESIAN_POINT('',(145.68,-122.355,-4.E-02)); +#366055 = LINE('',#366056,#366057); +#366056 = CARTESIAN_POINT('',(145.68,-122.355,0.)); +#366057 = VECTOR('',#366058,1.); +#366058 = DIRECTION('',(0.,0.,-1.)); +#366059 = ORIENTED_EDGE('',*,*,#366060,.T.); +#366060 = EDGE_CURVE('',#366053,#366061,#366063,.T.); +#366061 = VERTEX_POINT('',#366062); +#366062 = CARTESIAN_POINT('',(145.815,-122.22,-4.E-02)); +#366063 = CIRCLE('',#366064,0.135001418495); +#366064 = AXIS2_PLACEMENT_3D('',#366065,#366066,#366067); +#366065 = CARTESIAN_POINT('',(145.81500141848,-122.3550014184,-4.E-02)); +#366066 = DIRECTION('',(0.,0.,-1.)); +#366067 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366068 = ORIENTED_EDGE('',*,*,#366069,.F.); +#366069 = EDGE_CURVE('',#366070,#366061,#366072,.T.); +#366070 = VERTEX_POINT('',#366071); +#366071 = CARTESIAN_POINT('',(145.815,-122.22,0.)); +#366072 = LINE('',#366073,#366074); +#366073 = CARTESIAN_POINT('',(145.815,-122.22,0.)); +#366074 = VECTOR('',#366075,1.); +#366075 = DIRECTION('',(0.,0.,-1.)); +#366076 = ORIENTED_EDGE('',*,*,#366077,.F.); +#366077 = EDGE_CURVE('',#366051,#366070,#366078,.T.); +#366078 = CIRCLE('',#366079,0.135001418495); +#366079 = AXIS2_PLACEMENT_3D('',#366080,#366081,#366082); +#366080 = CARTESIAN_POINT('',(145.81500141848,-122.3550014184,0.)); +#366081 = DIRECTION('',(0.,0.,-1.)); +#366082 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366083 = CYLINDRICAL_SURFACE('',#366084,0.135001418495); +#366084 = AXIS2_PLACEMENT_3D('',#366085,#366086,#366087); +#366085 = CARTESIAN_POINT('',(145.81500141848,-122.3550014184,0.)); +#366086 = DIRECTION('',(-0.,-0.,1.)); +#366087 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366088 = ADVANCED_FACE('',(#366089),#366114,.F.); +#366089 = FACE_BOUND('',#366090,.F.); +#366090 = EDGE_LOOP('',(#366091,#366092,#366100,#366108)); +#366091 = ORIENTED_EDGE('',*,*,#366069,.T.); +#366092 = ORIENTED_EDGE('',*,*,#366093,.T.); +#366093 = EDGE_CURVE('',#366061,#366094,#366096,.T.); +#366094 = VERTEX_POINT('',#366095); +#366095 = CARTESIAN_POINT('',(146.185,-122.22,-4.E-02)); +#366096 = LINE('',#366097,#366098); +#366097 = CARTESIAN_POINT('',(145.815,-122.22,-4.E-02)); +#366098 = VECTOR('',#366099,1.); +#366099 = DIRECTION('',(1.,0.,0.)); +#366100 = ORIENTED_EDGE('',*,*,#366101,.F.); +#366101 = EDGE_CURVE('',#366102,#366094,#366104,.T.); +#366102 = VERTEX_POINT('',#366103); +#366103 = CARTESIAN_POINT('',(146.185,-122.22,0.)); +#366104 = LINE('',#366105,#366106); +#366105 = CARTESIAN_POINT('',(146.185,-122.22,0.)); +#366106 = VECTOR('',#366107,1.); +#366107 = DIRECTION('',(0.,0.,-1.)); +#366108 = ORIENTED_EDGE('',*,*,#366109,.F.); +#366109 = EDGE_CURVE('',#366070,#366102,#366110,.T.); +#366110 = LINE('',#366111,#366112); +#366111 = CARTESIAN_POINT('',(145.815,-122.22,0.)); +#366112 = VECTOR('',#366113,1.); +#366113 = DIRECTION('',(1.,0.,0.)); +#366114 = PLANE('',#366115); +#366115 = AXIS2_PLACEMENT_3D('',#366116,#366117,#366118); +#366116 = CARTESIAN_POINT('',(145.815,-122.22,0.)); +#366117 = DIRECTION('',(0.,-1.,0.)); +#366118 = DIRECTION('',(1.,0.,0.)); +#366119 = ADVANCED_FACE('',(#366120),#366147,.T.); +#366120 = FACE_BOUND('',#366121,.F.); +#366121 = EDGE_LOOP('',(#366122,#366123,#366132,#366140)); +#366122 = ORIENTED_EDGE('',*,*,#366101,.T.); +#366123 = ORIENTED_EDGE('',*,*,#366124,.T.); +#366124 = EDGE_CURVE('',#366094,#366125,#366127,.T.); +#366125 = VERTEX_POINT('',#366126); +#366126 = CARTESIAN_POINT('',(146.32,-122.355,-4.E-02)); +#366127 = CIRCLE('',#366128,0.135001418495); +#366128 = AXIS2_PLACEMENT_3D('',#366129,#366130,#366131); +#366129 = CARTESIAN_POINT('',(146.18499858151,-122.3550014184,-4.E-02)); +#366130 = DIRECTION('',(0.,0.,-1.)); +#366131 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#366132 = ORIENTED_EDGE('',*,*,#366133,.F.); +#366133 = EDGE_CURVE('',#366134,#366125,#366136,.T.); +#366134 = VERTEX_POINT('',#366135); +#366135 = CARTESIAN_POINT('',(146.32,-122.355,0.)); +#366136 = LINE('',#366137,#366138); +#366137 = CARTESIAN_POINT('',(146.32,-122.355,0.)); +#366138 = VECTOR('',#366139,1.); +#366139 = DIRECTION('',(0.,0.,-1.)); +#366140 = ORIENTED_EDGE('',*,*,#366141,.F.); +#366141 = EDGE_CURVE('',#366102,#366134,#366142,.T.); +#366142 = CIRCLE('',#366143,0.135001418495); +#366143 = AXIS2_PLACEMENT_3D('',#366144,#366145,#366146); +#366144 = CARTESIAN_POINT('',(146.18499858151,-122.3550014184,0.)); +#366145 = DIRECTION('',(0.,0.,-1.)); +#366146 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#366147 = CYLINDRICAL_SURFACE('',#366148,0.135001418495); +#366148 = AXIS2_PLACEMENT_3D('',#366149,#366150,#366151); +#366149 = CARTESIAN_POINT('',(146.18499858151,-122.3550014184,0.)); +#366150 = DIRECTION('',(-0.,-0.,1.)); +#366151 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#366152 = ADVANCED_FACE('',(#366153),#366178,.F.); +#366153 = FACE_BOUND('',#366154,.F.); +#366154 = EDGE_LOOP('',(#366155,#366156,#366164,#366172)); +#366155 = ORIENTED_EDGE('',*,*,#366133,.T.); +#366156 = ORIENTED_EDGE('',*,*,#366157,.T.); +#366157 = EDGE_CURVE('',#366125,#366158,#366160,.T.); +#366158 = VERTEX_POINT('',#366159); +#366159 = CARTESIAN_POINT('',(146.32,-122.625,-4.E-02)); +#366160 = LINE('',#366161,#366162); +#366161 = CARTESIAN_POINT('',(146.32,-122.355,-4.E-02)); +#366162 = VECTOR('',#366163,1.); +#366163 = DIRECTION('',(0.,-1.,0.)); +#366164 = ORIENTED_EDGE('',*,*,#366165,.F.); +#366165 = EDGE_CURVE('',#366166,#366158,#366168,.T.); +#366166 = VERTEX_POINT('',#366167); +#366167 = CARTESIAN_POINT('',(146.32,-122.625,0.)); +#366168 = LINE('',#366169,#366170); +#366169 = CARTESIAN_POINT('',(146.32,-122.625,0.)); +#366170 = VECTOR('',#366171,1.); +#366171 = DIRECTION('',(0.,0.,-1.)); +#366172 = ORIENTED_EDGE('',*,*,#366173,.F.); +#366173 = EDGE_CURVE('',#366134,#366166,#366174,.T.); +#366174 = LINE('',#366175,#366176); +#366175 = CARTESIAN_POINT('',(146.32,-122.355,0.)); +#366176 = VECTOR('',#366177,1.); +#366177 = DIRECTION('',(0.,-1.,0.)); +#366178 = PLANE('',#366179); +#366179 = AXIS2_PLACEMENT_3D('',#366180,#366181,#366182); +#366180 = CARTESIAN_POINT('',(146.32,-122.355,0.)); +#366181 = DIRECTION('',(-1.,-0.,-0.)); +#366182 = DIRECTION('',(0.,-1.,0.)); +#366183 = ADVANCED_FACE('',(#366184),#366211,.T.); +#366184 = FACE_BOUND('',#366185,.F.); +#366185 = EDGE_LOOP('',(#366186,#366187,#366196,#366204)); +#366186 = ORIENTED_EDGE('',*,*,#366165,.T.); +#366187 = ORIENTED_EDGE('',*,*,#366188,.T.); +#366188 = EDGE_CURVE('',#366158,#366189,#366191,.T.); +#366189 = VERTEX_POINT('',#366190); +#366190 = CARTESIAN_POINT('',(146.185,-122.76,-4.E-02)); +#366191 = CIRCLE('',#366192,0.135001418495); +#366192 = AXIS2_PLACEMENT_3D('',#366193,#366194,#366195); +#366193 = CARTESIAN_POINT('',(146.18499858151,-122.6249985815,-4.E-02)); +#366194 = DIRECTION('',(0.,0.,-1.)); +#366195 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#366196 = ORIENTED_EDGE('',*,*,#366197,.F.); +#366197 = EDGE_CURVE('',#366198,#366189,#366200,.T.); +#366198 = VERTEX_POINT('',#366199); +#366199 = CARTESIAN_POINT('',(146.185,-122.76,0.)); +#366200 = LINE('',#366201,#366202); +#366201 = CARTESIAN_POINT('',(146.185,-122.76,0.)); +#366202 = VECTOR('',#366203,1.); +#366203 = DIRECTION('',(0.,0.,-1.)); +#366204 = ORIENTED_EDGE('',*,*,#366205,.F.); +#366205 = EDGE_CURVE('',#366166,#366198,#366206,.T.); +#366206 = CIRCLE('',#366207,0.135001418495); +#366207 = AXIS2_PLACEMENT_3D('',#366208,#366209,#366210); +#366208 = CARTESIAN_POINT('',(146.18499858151,-122.6249985815,0.)); +#366209 = DIRECTION('',(0.,0.,-1.)); +#366210 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#366211 = CYLINDRICAL_SURFACE('',#366212,0.135001418495); +#366212 = AXIS2_PLACEMENT_3D('',#366213,#366214,#366215); +#366213 = CARTESIAN_POINT('',(146.18499858151,-122.6249985815,0.)); +#366214 = DIRECTION('',(-0.,-0.,1.)); +#366215 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#366216 = ADVANCED_FACE('',(#366217),#366242,.F.); +#366217 = FACE_BOUND('',#366218,.F.); +#366218 = EDGE_LOOP('',(#366219,#366220,#366228,#366236)); +#366219 = ORIENTED_EDGE('',*,*,#366197,.T.); +#366220 = ORIENTED_EDGE('',*,*,#366221,.T.); +#366221 = EDGE_CURVE('',#366189,#366222,#366224,.T.); +#366222 = VERTEX_POINT('',#366223); +#366223 = CARTESIAN_POINT('',(145.815,-122.76,-4.E-02)); +#366224 = LINE('',#366225,#366226); +#366225 = CARTESIAN_POINT('',(146.185,-122.76,-4.E-02)); +#366226 = VECTOR('',#366227,1.); +#366227 = DIRECTION('',(-1.,0.,0.)); +#366228 = ORIENTED_EDGE('',*,*,#366229,.F.); +#366229 = EDGE_CURVE('',#366230,#366222,#366232,.T.); +#366230 = VERTEX_POINT('',#366231); +#366231 = CARTESIAN_POINT('',(145.815,-122.76,0.)); +#366232 = LINE('',#366233,#366234); +#366233 = CARTESIAN_POINT('',(145.815,-122.76,0.)); +#366234 = VECTOR('',#366235,1.); +#366235 = DIRECTION('',(0.,0.,-1.)); +#366236 = ORIENTED_EDGE('',*,*,#366237,.F.); +#366237 = EDGE_CURVE('',#366198,#366230,#366238,.T.); +#366238 = LINE('',#366239,#366240); +#366239 = CARTESIAN_POINT('',(146.185,-122.76,0.)); +#366240 = VECTOR('',#366241,1.); +#366241 = DIRECTION('',(-1.,0.,0.)); +#366242 = PLANE('',#366243); +#366243 = AXIS2_PLACEMENT_3D('',#366244,#366245,#366246); +#366244 = CARTESIAN_POINT('',(146.185,-122.76,0.)); +#366245 = DIRECTION('',(0.,1.,0.)); +#366246 = DIRECTION('',(-1.,0.,0.)); +#366247 = ADVANCED_FACE('',(#366248),#366275,.T.); +#366248 = FACE_BOUND('',#366249,.F.); +#366249 = EDGE_LOOP('',(#366250,#366251,#366260,#366268)); +#366250 = ORIENTED_EDGE('',*,*,#366229,.T.); +#366251 = ORIENTED_EDGE('',*,*,#366252,.T.); +#366252 = EDGE_CURVE('',#366222,#366253,#366255,.T.); +#366253 = VERTEX_POINT('',#366254); +#366254 = CARTESIAN_POINT('',(145.68,-122.625,-4.E-02)); +#366255 = CIRCLE('',#366256,0.135001418495); +#366256 = AXIS2_PLACEMENT_3D('',#366257,#366258,#366259); +#366257 = CARTESIAN_POINT('',(145.81500141848,-122.6249985815,-4.E-02)); +#366258 = DIRECTION('',(0.,0.,-1.)); +#366259 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#366260 = ORIENTED_EDGE('',*,*,#366261,.F.); +#366261 = EDGE_CURVE('',#366262,#366253,#366264,.T.); +#366262 = VERTEX_POINT('',#366263); +#366263 = CARTESIAN_POINT('',(145.68,-122.625,0.)); +#366264 = LINE('',#366265,#366266); +#366265 = CARTESIAN_POINT('',(145.68,-122.625,0.)); +#366266 = VECTOR('',#366267,1.); +#366267 = DIRECTION('',(0.,0.,-1.)); +#366268 = ORIENTED_EDGE('',*,*,#366269,.F.); +#366269 = EDGE_CURVE('',#366230,#366262,#366270,.T.); +#366270 = CIRCLE('',#366271,0.135001418495); +#366271 = AXIS2_PLACEMENT_3D('',#366272,#366273,#366274); +#366272 = CARTESIAN_POINT('',(145.81500141848,-122.6249985815,0.)); +#366273 = DIRECTION('',(0.,0.,-1.)); +#366274 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#366275 = CYLINDRICAL_SURFACE('',#366276,0.135001418495); +#366276 = AXIS2_PLACEMENT_3D('',#366277,#366278,#366279); +#366277 = CARTESIAN_POINT('',(145.81500141848,-122.6249985815,0.)); +#366278 = DIRECTION('',(-0.,-0.,1.)); +#366279 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#366280 = ADVANCED_FACE('',(#366281),#366297,.F.); +#366281 = FACE_BOUND('',#366282,.F.); +#366282 = EDGE_LOOP('',(#366283,#366284,#366290,#366291)); +#366283 = ORIENTED_EDGE('',*,*,#366261,.T.); +#366284 = ORIENTED_EDGE('',*,*,#366285,.T.); +#366285 = EDGE_CURVE('',#366253,#366053,#366286,.T.); +#366286 = LINE('',#366287,#366288); +#366287 = CARTESIAN_POINT('',(145.68,-122.625,-4.E-02)); +#366288 = VECTOR('',#366289,1.); +#366289 = DIRECTION('',(0.,1.,0.)); +#366290 = ORIENTED_EDGE('',*,*,#366050,.F.); +#366291 = ORIENTED_EDGE('',*,*,#366292,.F.); +#366292 = EDGE_CURVE('',#366262,#366051,#366293,.T.); +#366293 = LINE('',#366294,#366295); +#366294 = CARTESIAN_POINT('',(145.68,-122.625,0.)); +#366295 = VECTOR('',#366296,1.); +#366296 = DIRECTION('',(0.,1.,0.)); +#366297 = PLANE('',#366298); +#366298 = AXIS2_PLACEMENT_3D('',#366299,#366300,#366301); +#366299 = CARTESIAN_POINT('',(145.68,-122.625,0.)); +#366300 = DIRECTION('',(1.,-0.,0.)); +#366301 = DIRECTION('',(0.,1.,0.)); +#366302 = ADVANCED_FACE('',(#366303),#366313,.F.); +#366303 = FACE_BOUND('',#366304,.F.); +#366304 = EDGE_LOOP('',(#366305,#366306,#366307,#366308,#366309,#366310, + #366311,#366312)); +#366305 = ORIENTED_EDGE('',*,*,#366077,.T.); +#366306 = ORIENTED_EDGE('',*,*,#366109,.T.); +#366307 = ORIENTED_EDGE('',*,*,#366141,.T.); +#366308 = ORIENTED_EDGE('',*,*,#366173,.T.); +#366309 = ORIENTED_EDGE('',*,*,#366205,.T.); +#366310 = ORIENTED_EDGE('',*,*,#366237,.T.); +#366311 = ORIENTED_EDGE('',*,*,#366269,.T.); +#366312 = ORIENTED_EDGE('',*,*,#366292,.T.); +#366313 = PLANE('',#366314); +#366314 = AXIS2_PLACEMENT_3D('',#366315,#366316,#366317); +#366315 = CARTESIAN_POINT('',(0.,0.,0.)); +#366316 = DIRECTION('',(-0.,-0.,-1.)); +#366317 = DIRECTION('',(-1.,0.,0.)); +#366318 = ADVANCED_FACE('',(#366319),#366329,.T.); +#366319 = FACE_BOUND('',#366320,.T.); +#366320 = EDGE_LOOP('',(#366321,#366322,#366323,#366324,#366325,#366326, + #366327,#366328)); +#366321 = ORIENTED_EDGE('',*,*,#366060,.T.); +#366322 = ORIENTED_EDGE('',*,*,#366093,.T.); +#366323 = ORIENTED_EDGE('',*,*,#366124,.T.); +#366324 = ORIENTED_EDGE('',*,*,#366157,.T.); +#366325 = ORIENTED_EDGE('',*,*,#366188,.T.); +#366326 = ORIENTED_EDGE('',*,*,#366221,.T.); +#366327 = ORIENTED_EDGE('',*,*,#366252,.T.); +#366328 = ORIENTED_EDGE('',*,*,#366285,.T.); +#366329 = PLANE('',#366330); +#366330 = AXIS2_PLACEMENT_3D('',#366331,#366332,#366333); +#366331 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#366332 = DIRECTION('',(-0.,-0.,-1.)); +#366333 = DIRECTION('',(-1.,0.,0.)); +#366334 = MANIFOLD_SOLID_BREP('',#366335); +#366335 = CLOSED_SHELL('',(#366336,#366378,#366409,#366442,#366473, + #366506,#366537,#366570,#366592,#366608)); +#366336 = ADVANCED_FACE('',(#366337),#366373,.T.); +#366337 = FACE_BOUND('',#366338,.T.); +#366338 = EDGE_LOOP('',(#366339,#366349,#366358,#366366)); +#366339 = ORIENTED_EDGE('',*,*,#366340,.T.); +#366340 = EDGE_CURVE('',#366341,#366343,#366345,.T.); +#366341 = VERTEX_POINT('',#366342); +#366342 = CARTESIAN_POINT('',(146.75,-155.4,1.51)); +#366343 = VERTEX_POINT('',#366344); +#366344 = CARTESIAN_POINT('',(146.75,-155.4,1.55)); +#366345 = LINE('',#366346,#366347); +#366346 = CARTESIAN_POINT('',(146.75,-155.4,1.51)); +#366347 = VECTOR('',#366348,1.); +#366348 = DIRECTION('',(0.,0.,1.)); +#366349 = ORIENTED_EDGE('',*,*,#366350,.T.); +#366350 = EDGE_CURVE('',#366343,#366351,#366353,.T.); +#366351 = VERTEX_POINT('',#366352); +#366352 = CARTESIAN_POINT('',(146.9,-155.25,1.55)); +#366353 = CIRCLE('',#366354,0.150000058649); +#366354 = AXIS2_PLACEMENT_3D('',#366355,#366356,#366357); +#366355 = CARTESIAN_POINT('',(146.90000005864,-155.4000000586,1.55)); +#366356 = DIRECTION('',(0.,0.,-1.)); +#366357 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#366358 = ORIENTED_EDGE('',*,*,#366359,.F.); +#366359 = EDGE_CURVE('',#366360,#366351,#366362,.T.); +#366360 = VERTEX_POINT('',#366361); +#366361 = CARTESIAN_POINT('',(146.9,-155.25,1.51)); +#366362 = LINE('',#366363,#366364); +#366363 = CARTESIAN_POINT('',(146.9,-155.25,1.51)); +#366364 = VECTOR('',#366365,1.); +#366365 = DIRECTION('',(0.,0.,1.)); +#366366 = ORIENTED_EDGE('',*,*,#366367,.F.); +#366367 = EDGE_CURVE('',#366341,#366360,#366368,.T.); +#366368 = CIRCLE('',#366369,0.150000058649); +#366369 = AXIS2_PLACEMENT_3D('',#366370,#366371,#366372); +#366370 = CARTESIAN_POINT('',(146.90000005864,-155.4000000586,1.51)); +#366371 = DIRECTION('',(0.,0.,-1.)); +#366372 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#366373 = CYLINDRICAL_SURFACE('',#366374,0.150000058649); +#366374 = AXIS2_PLACEMENT_3D('',#366375,#366376,#366377); +#366375 = CARTESIAN_POINT('',(146.90000005864,-155.4000000586,1.51)); +#366376 = DIRECTION('',(0.,0.,-1.)); +#366377 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#366378 = ADVANCED_FACE('',(#366379),#366404,.T.); +#366379 = FACE_BOUND('',#366380,.T.); +#366380 = EDGE_LOOP('',(#366381,#366382,#366390,#366398)); +#366381 = ORIENTED_EDGE('',*,*,#366359,.T.); +#366382 = ORIENTED_EDGE('',*,*,#366383,.T.); +#366383 = EDGE_CURVE('',#366351,#366384,#366386,.T.); +#366384 = VERTEX_POINT('',#366385); +#366385 = CARTESIAN_POINT('',(148.1,-155.25,1.55)); +#366386 = LINE('',#366387,#366388); +#366387 = CARTESIAN_POINT('',(146.9,-155.25,1.55)); +#366388 = VECTOR('',#366389,1.); +#366389 = DIRECTION('',(1.,0.,0.)); +#366390 = ORIENTED_EDGE('',*,*,#366391,.F.); +#366391 = EDGE_CURVE('',#366392,#366384,#366394,.T.); +#366392 = VERTEX_POINT('',#366393); +#366393 = CARTESIAN_POINT('',(148.1,-155.25,1.51)); +#366394 = LINE('',#366395,#366396); +#366395 = CARTESIAN_POINT('',(148.1,-155.25,1.51)); +#366396 = VECTOR('',#366397,1.); +#366397 = DIRECTION('',(0.,0.,1.)); +#366398 = ORIENTED_EDGE('',*,*,#366399,.F.); +#366399 = EDGE_CURVE('',#366360,#366392,#366400,.T.); +#366400 = LINE('',#366401,#366402); +#366401 = CARTESIAN_POINT('',(146.9,-155.25,1.51)); +#366402 = VECTOR('',#366403,1.); +#366403 = DIRECTION('',(1.,0.,0.)); +#366404 = PLANE('',#366405); +#366405 = AXIS2_PLACEMENT_3D('',#366406,#366407,#366408); +#366406 = CARTESIAN_POINT('',(146.9,-155.25,1.51)); +#366407 = DIRECTION('',(0.,1.,0.)); +#366408 = DIRECTION('',(1.,0.,0.)); +#366409 = ADVANCED_FACE('',(#366410),#366437,.T.); +#366410 = FACE_BOUND('',#366411,.T.); +#366411 = EDGE_LOOP('',(#366412,#366413,#366422,#366430)); +#366412 = ORIENTED_EDGE('',*,*,#366391,.T.); +#366413 = ORIENTED_EDGE('',*,*,#366414,.T.); +#366414 = EDGE_CURVE('',#366384,#366415,#366417,.T.); +#366415 = VERTEX_POINT('',#366416); +#366416 = CARTESIAN_POINT('',(148.25,-155.4,1.55)); +#366417 = CIRCLE('',#366418,0.150000058649); +#366418 = AXIS2_PLACEMENT_3D('',#366419,#366420,#366421); +#366419 = CARTESIAN_POINT('',(148.09999994135,-155.4000000586,1.55)); +#366420 = DIRECTION('',(0.,0.,-1.)); +#366421 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#366422 = ORIENTED_EDGE('',*,*,#366423,.F.); +#366423 = EDGE_CURVE('',#366424,#366415,#366426,.T.); +#366424 = VERTEX_POINT('',#366425); +#366425 = CARTESIAN_POINT('',(148.25,-155.4,1.51)); +#366426 = LINE('',#366427,#366428); +#366427 = CARTESIAN_POINT('',(148.25,-155.4,1.51)); +#366428 = VECTOR('',#366429,1.); +#366429 = DIRECTION('',(0.,0.,1.)); +#366430 = ORIENTED_EDGE('',*,*,#366431,.F.); +#366431 = EDGE_CURVE('',#366392,#366424,#366432,.T.); +#366432 = CIRCLE('',#366433,0.150000058649); +#366433 = AXIS2_PLACEMENT_3D('',#366434,#366435,#366436); +#366434 = CARTESIAN_POINT('',(148.09999994135,-155.4000000586,1.51)); +#366435 = DIRECTION('',(0.,0.,-1.)); +#366436 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#366437 = CYLINDRICAL_SURFACE('',#366438,0.150000058649); +#366438 = AXIS2_PLACEMENT_3D('',#366439,#366440,#366441); +#366439 = CARTESIAN_POINT('',(148.09999994135,-155.4000000586,1.51)); +#366440 = DIRECTION('',(0.,0.,-1.)); +#366441 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#366442 = ADVANCED_FACE('',(#366443),#366468,.T.); +#366443 = FACE_BOUND('',#366444,.T.); +#366444 = EDGE_LOOP('',(#366445,#366446,#366454,#366462)); +#366445 = ORIENTED_EDGE('',*,*,#366423,.T.); +#366446 = ORIENTED_EDGE('',*,*,#366447,.T.); +#366447 = EDGE_CURVE('',#366415,#366448,#366450,.T.); +#366448 = VERTEX_POINT('',#366449); +#366449 = CARTESIAN_POINT('',(148.25,-156.1,1.55)); +#366450 = LINE('',#366451,#366452); +#366451 = CARTESIAN_POINT('',(148.25,-155.4,1.55)); +#366452 = VECTOR('',#366453,1.); +#366453 = DIRECTION('',(0.,-1.,0.)); +#366454 = ORIENTED_EDGE('',*,*,#366455,.F.); +#366455 = EDGE_CURVE('',#366456,#366448,#366458,.T.); +#366456 = VERTEX_POINT('',#366457); +#366457 = CARTESIAN_POINT('',(148.25,-156.1,1.51)); +#366458 = LINE('',#366459,#366460); +#366459 = CARTESIAN_POINT('',(148.25,-156.1,1.51)); +#366460 = VECTOR('',#366461,1.); +#366461 = DIRECTION('',(0.,0.,1.)); +#366462 = ORIENTED_EDGE('',*,*,#366463,.F.); +#366463 = EDGE_CURVE('',#366424,#366456,#366464,.T.); +#366464 = LINE('',#366465,#366466); +#366465 = CARTESIAN_POINT('',(148.25,-155.4,1.51)); +#366466 = VECTOR('',#366467,1.); +#366467 = DIRECTION('',(0.,-1.,0.)); +#366468 = PLANE('',#366469); +#366469 = AXIS2_PLACEMENT_3D('',#366470,#366471,#366472); +#366470 = CARTESIAN_POINT('',(148.25,-155.4,1.51)); +#366471 = DIRECTION('',(1.,0.,-0.)); +#366472 = DIRECTION('',(0.,-1.,0.)); +#366473 = ADVANCED_FACE('',(#366474),#366501,.T.); +#366474 = FACE_BOUND('',#366475,.T.); +#366475 = EDGE_LOOP('',(#366476,#366477,#366486,#366494)); +#366476 = ORIENTED_EDGE('',*,*,#366455,.T.); +#366477 = ORIENTED_EDGE('',*,*,#366478,.T.); +#366478 = EDGE_CURVE('',#366448,#366479,#366481,.T.); +#366479 = VERTEX_POINT('',#366480); +#366480 = CARTESIAN_POINT('',(148.1,-156.25,1.55)); +#366481 = CIRCLE('',#366482,0.150000058649); +#366482 = AXIS2_PLACEMENT_3D('',#366483,#366484,#366485); +#366483 = CARTESIAN_POINT('',(148.09999994135,-156.0999999413,1.55)); +#366484 = DIRECTION('',(0.,0.,-1.)); +#366485 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#366486 = ORIENTED_EDGE('',*,*,#366487,.F.); +#366487 = EDGE_CURVE('',#366488,#366479,#366490,.T.); +#366488 = VERTEX_POINT('',#366489); +#366489 = CARTESIAN_POINT('',(148.1,-156.25,1.51)); +#366490 = LINE('',#366491,#366492); +#366491 = CARTESIAN_POINT('',(148.1,-156.25,1.51)); +#366492 = VECTOR('',#366493,1.); +#366493 = DIRECTION('',(0.,0.,1.)); +#366494 = ORIENTED_EDGE('',*,*,#366495,.F.); +#366495 = EDGE_CURVE('',#366456,#366488,#366496,.T.); +#366496 = CIRCLE('',#366497,0.150000058649); +#366497 = AXIS2_PLACEMENT_3D('',#366498,#366499,#366500); +#366498 = CARTESIAN_POINT('',(148.09999994135,-156.0999999413,1.51)); +#366499 = DIRECTION('',(0.,0.,-1.)); +#366500 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#366501 = CYLINDRICAL_SURFACE('',#366502,0.150000058649); +#366502 = AXIS2_PLACEMENT_3D('',#366503,#366504,#366505); +#366503 = CARTESIAN_POINT('',(148.09999994135,-156.0999999413,1.51)); +#366504 = DIRECTION('',(0.,0.,-1.)); +#366505 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#366506 = ADVANCED_FACE('',(#366507),#366532,.T.); +#366507 = FACE_BOUND('',#366508,.T.); +#366508 = EDGE_LOOP('',(#366509,#366510,#366518,#366526)); +#366509 = ORIENTED_EDGE('',*,*,#366487,.T.); +#366510 = ORIENTED_EDGE('',*,*,#366511,.T.); +#366511 = EDGE_CURVE('',#366479,#366512,#366514,.T.); +#366512 = VERTEX_POINT('',#366513); +#366513 = CARTESIAN_POINT('',(146.9,-156.25,1.55)); +#366514 = LINE('',#366515,#366516); +#366515 = CARTESIAN_POINT('',(148.1,-156.25,1.55)); +#366516 = VECTOR('',#366517,1.); +#366517 = DIRECTION('',(-1.,0.,0.)); +#366518 = ORIENTED_EDGE('',*,*,#366519,.F.); +#366519 = EDGE_CURVE('',#366520,#366512,#366522,.T.); +#366520 = VERTEX_POINT('',#366521); +#366521 = CARTESIAN_POINT('',(146.9,-156.25,1.51)); +#366522 = LINE('',#366523,#366524); +#366523 = CARTESIAN_POINT('',(146.9,-156.25,1.51)); +#366524 = VECTOR('',#366525,1.); +#366525 = DIRECTION('',(0.,0.,1.)); +#366526 = ORIENTED_EDGE('',*,*,#366527,.F.); +#366527 = EDGE_CURVE('',#366488,#366520,#366528,.T.); +#366528 = LINE('',#366529,#366530); +#366529 = CARTESIAN_POINT('',(148.1,-156.25,1.51)); +#366530 = VECTOR('',#366531,1.); +#366531 = DIRECTION('',(-1.,0.,0.)); +#366532 = PLANE('',#366533); +#366533 = AXIS2_PLACEMENT_3D('',#366534,#366535,#366536); +#366534 = CARTESIAN_POINT('',(148.1,-156.25,1.51)); +#366535 = DIRECTION('',(0.,-1.,0.)); +#366536 = DIRECTION('',(-1.,0.,0.)); +#366537 = ADVANCED_FACE('',(#366538),#366565,.T.); +#366538 = FACE_BOUND('',#366539,.T.); +#366539 = EDGE_LOOP('',(#366540,#366541,#366550,#366558)); +#366540 = ORIENTED_EDGE('',*,*,#366519,.T.); +#366541 = ORIENTED_EDGE('',*,*,#366542,.T.); +#366542 = EDGE_CURVE('',#366512,#366543,#366545,.T.); +#366543 = VERTEX_POINT('',#366544); +#366544 = CARTESIAN_POINT('',(146.75,-156.1,1.55)); +#366545 = CIRCLE('',#366546,0.150000058649); +#366546 = AXIS2_PLACEMENT_3D('',#366547,#366548,#366549); +#366547 = CARTESIAN_POINT('',(146.90000005864,-156.0999999413,1.55)); +#366548 = DIRECTION('',(0.,0.,-1.)); +#366549 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#366550 = ORIENTED_EDGE('',*,*,#366551,.F.); +#366551 = EDGE_CURVE('',#366552,#366543,#366554,.T.); +#366552 = VERTEX_POINT('',#366553); +#366553 = CARTESIAN_POINT('',(146.75,-156.1,1.51)); +#366554 = LINE('',#366555,#366556); +#366555 = CARTESIAN_POINT('',(146.75,-156.1,1.51)); +#366556 = VECTOR('',#366557,1.); +#366557 = DIRECTION('',(0.,0.,1.)); +#366558 = ORIENTED_EDGE('',*,*,#366559,.F.); +#366559 = EDGE_CURVE('',#366520,#366552,#366560,.T.); +#366560 = CIRCLE('',#366561,0.150000058649); +#366561 = AXIS2_PLACEMENT_3D('',#366562,#366563,#366564); +#366562 = CARTESIAN_POINT('',(146.90000005864,-156.0999999413,1.51)); +#366563 = DIRECTION('',(0.,0.,-1.)); +#366564 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#366565 = CYLINDRICAL_SURFACE('',#366566,0.150000058649); +#366566 = AXIS2_PLACEMENT_3D('',#366567,#366568,#366569); +#366567 = CARTESIAN_POINT('',(146.90000005864,-156.0999999413,1.51)); +#366568 = DIRECTION('',(0.,0.,-1.)); +#366569 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#366570 = ADVANCED_FACE('',(#366571),#366587,.T.); +#366571 = FACE_BOUND('',#366572,.T.); +#366572 = EDGE_LOOP('',(#366573,#366574,#366580,#366581)); +#366573 = ORIENTED_EDGE('',*,*,#366551,.T.); +#366574 = ORIENTED_EDGE('',*,*,#366575,.T.); +#366575 = EDGE_CURVE('',#366543,#366343,#366576,.T.); +#366576 = LINE('',#366577,#366578); +#366577 = CARTESIAN_POINT('',(146.75,-156.1,1.55)); +#366578 = VECTOR('',#366579,1.); +#366579 = DIRECTION('',(0.,1.,0.)); +#366580 = ORIENTED_EDGE('',*,*,#366340,.F.); +#366581 = ORIENTED_EDGE('',*,*,#366582,.F.); +#366582 = EDGE_CURVE('',#366552,#366341,#366583,.T.); +#366583 = LINE('',#366584,#366585); +#366584 = CARTESIAN_POINT('',(146.75,-156.1,1.51)); +#366585 = VECTOR('',#366586,1.); +#366586 = DIRECTION('',(0.,1.,0.)); +#366587 = PLANE('',#366588); +#366588 = AXIS2_PLACEMENT_3D('',#366589,#366590,#366591); +#366589 = CARTESIAN_POINT('',(146.75,-156.1,1.51)); +#366590 = DIRECTION('',(-1.,0.,0.)); +#366591 = DIRECTION('',(0.,1.,0.)); +#366592 = ADVANCED_FACE('',(#366593),#366603,.F.); +#366593 = FACE_BOUND('',#366594,.T.); +#366594 = EDGE_LOOP('',(#366595,#366596,#366597,#366598,#366599,#366600, + #366601,#366602)); +#366595 = ORIENTED_EDGE('',*,*,#366367,.T.); +#366596 = ORIENTED_EDGE('',*,*,#366399,.T.); +#366597 = ORIENTED_EDGE('',*,*,#366431,.T.); +#366598 = ORIENTED_EDGE('',*,*,#366463,.T.); +#366599 = ORIENTED_EDGE('',*,*,#366495,.T.); +#366600 = ORIENTED_EDGE('',*,*,#366527,.T.); +#366601 = ORIENTED_EDGE('',*,*,#366559,.T.); +#366602 = ORIENTED_EDGE('',*,*,#366582,.T.); +#366603 = PLANE('',#366604); +#366604 = AXIS2_PLACEMENT_3D('',#366605,#366606,#366607); +#366605 = CARTESIAN_POINT('',(0.,0.,1.51)); +#366606 = DIRECTION('',(0.,0.,1.)); +#366607 = DIRECTION('',(1.,0.,-0.)); +#366608 = ADVANCED_FACE('',(#366609),#366619,.T.); +#366609 = FACE_BOUND('',#366610,.F.); +#366610 = EDGE_LOOP('',(#366611,#366612,#366613,#366614,#366615,#366616, + #366617,#366618)); +#366611 = ORIENTED_EDGE('',*,*,#366350,.T.); +#366612 = ORIENTED_EDGE('',*,*,#366383,.T.); +#366613 = ORIENTED_EDGE('',*,*,#366414,.T.); +#366614 = ORIENTED_EDGE('',*,*,#366447,.T.); +#366615 = ORIENTED_EDGE('',*,*,#366478,.T.); +#366616 = ORIENTED_EDGE('',*,*,#366511,.T.); +#366617 = ORIENTED_EDGE('',*,*,#366542,.T.); +#366618 = ORIENTED_EDGE('',*,*,#366575,.T.); +#366619 = PLANE('',#366620); +#366620 = AXIS2_PLACEMENT_3D('',#366621,#366622,#366623); +#366621 = CARTESIAN_POINT('',(0.,0.,1.55)); +#366622 = DIRECTION('',(0.,0.,1.)); +#366623 = DIRECTION('',(1.,0.,-0.)); +#366624 = MANIFOLD_SOLID_BREP('',#366625); +#366625 = CLOSED_SHELL('',(#366626,#366668,#366699,#366732,#366763, + #366796,#366827,#366860,#366882,#366898)); +#366626 = ADVANCED_FACE('',(#366627),#366663,.T.); +#366627 = FACE_BOUND('',#366628,.T.); +#366628 = EDGE_LOOP('',(#366629,#366639,#366648,#366656)); +#366629 = ORIENTED_EDGE('',*,*,#366630,.T.); +#366630 = EDGE_CURVE('',#366631,#366633,#366635,.T.); +#366631 = VERTEX_POINT('',#366632); +#366632 = CARTESIAN_POINT('',(147.93,-153.125,1.51)); +#366633 = VERTEX_POINT('',#366634); +#366634 = CARTESIAN_POINT('',(147.93,-153.125,1.55)); +#366635 = LINE('',#366636,#366637); +#366636 = CARTESIAN_POINT('',(147.93,-153.125,1.51)); +#366637 = VECTOR('',#366638,1.); +#366638 = DIRECTION('',(0.,0.,1.)); +#366639 = ORIENTED_EDGE('',*,*,#366640,.T.); +#366640 = EDGE_CURVE('',#366633,#366641,#366643,.T.); +#366641 = VERTEX_POINT('',#366642); +#366642 = CARTESIAN_POINT('',(148.065,-152.99,1.55)); +#366643 = CIRCLE('',#366644,0.135001418495); +#366644 = AXIS2_PLACEMENT_3D('',#366645,#366646,#366647); +#366645 = CARTESIAN_POINT('',(148.06500141848,-153.1250014184,1.55)); +#366646 = DIRECTION('',(0.,0.,-1.)); +#366647 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366648 = ORIENTED_EDGE('',*,*,#366649,.F.); +#366649 = EDGE_CURVE('',#366650,#366641,#366652,.T.); +#366650 = VERTEX_POINT('',#366651); +#366651 = CARTESIAN_POINT('',(148.065,-152.99,1.51)); +#366652 = LINE('',#366653,#366654); +#366653 = CARTESIAN_POINT('',(148.065,-152.99,1.51)); +#366654 = VECTOR('',#366655,1.); +#366655 = DIRECTION('',(0.,0.,1.)); +#366656 = ORIENTED_EDGE('',*,*,#366657,.F.); +#366657 = EDGE_CURVE('',#366631,#366650,#366658,.T.); +#366658 = CIRCLE('',#366659,0.135001418495); +#366659 = AXIS2_PLACEMENT_3D('',#366660,#366661,#366662); +#366660 = CARTESIAN_POINT('',(148.06500141848,-153.1250014184,1.51)); +#366661 = DIRECTION('',(0.,0.,-1.)); +#366662 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366663 = CYLINDRICAL_SURFACE('',#366664,0.135001418495); +#366664 = AXIS2_PLACEMENT_3D('',#366665,#366666,#366667); +#366665 = CARTESIAN_POINT('',(148.06500141848,-153.1250014184,1.51)); +#366666 = DIRECTION('',(0.,0.,-1.)); +#366667 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#366668 = ADVANCED_FACE('',(#366669),#366694,.T.); +#366669 = FACE_BOUND('',#366670,.T.); +#366670 = EDGE_LOOP('',(#366671,#366672,#366680,#366688)); +#366671 = ORIENTED_EDGE('',*,*,#366649,.T.); +#366672 = ORIENTED_EDGE('',*,*,#366673,.T.); +#366673 = EDGE_CURVE('',#366641,#366674,#366676,.T.); +#366674 = VERTEX_POINT('',#366675); +#366675 = CARTESIAN_POINT('',(148.435,-152.99,1.55)); +#366676 = LINE('',#366677,#366678); +#366677 = CARTESIAN_POINT('',(148.065,-152.99,1.55)); +#366678 = VECTOR('',#366679,1.); +#366679 = DIRECTION('',(1.,0.,0.)); +#366680 = ORIENTED_EDGE('',*,*,#366681,.F.); +#366681 = EDGE_CURVE('',#366682,#366674,#366684,.T.); +#366682 = VERTEX_POINT('',#366683); +#366683 = CARTESIAN_POINT('',(148.435,-152.99,1.51)); +#366684 = LINE('',#366685,#366686); +#366685 = CARTESIAN_POINT('',(148.435,-152.99,1.51)); +#366686 = VECTOR('',#366687,1.); +#366687 = DIRECTION('',(0.,0.,1.)); +#366688 = ORIENTED_EDGE('',*,*,#366689,.F.); +#366689 = EDGE_CURVE('',#366650,#366682,#366690,.T.); +#366690 = LINE('',#366691,#366692); +#366691 = CARTESIAN_POINT('',(148.065,-152.99,1.51)); +#366692 = VECTOR('',#366693,1.); +#366693 = DIRECTION('',(1.,0.,0.)); +#366694 = PLANE('',#366695); +#366695 = AXIS2_PLACEMENT_3D('',#366696,#366697,#366698); +#366696 = CARTESIAN_POINT('',(148.065,-152.99,1.51)); +#366697 = DIRECTION('',(0.,1.,0.)); +#366698 = DIRECTION('',(1.,0.,0.)); +#366699 = ADVANCED_FACE('',(#366700),#366727,.T.); +#366700 = FACE_BOUND('',#366701,.T.); +#366701 = EDGE_LOOP('',(#366702,#366703,#366712,#366720)); +#366702 = ORIENTED_EDGE('',*,*,#366681,.T.); +#366703 = ORIENTED_EDGE('',*,*,#366704,.T.); +#366704 = EDGE_CURVE('',#366674,#366705,#366707,.T.); +#366705 = VERTEX_POINT('',#366706); +#366706 = CARTESIAN_POINT('',(148.57,-153.125,1.55)); +#366707 = CIRCLE('',#366708,0.135001418495); +#366708 = AXIS2_PLACEMENT_3D('',#366709,#366710,#366711); +#366709 = CARTESIAN_POINT('',(148.43499858151,-153.1250014184,1.55)); +#366710 = DIRECTION('',(0.,0.,-1.)); +#366711 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#366712 = ORIENTED_EDGE('',*,*,#366713,.F.); +#366713 = EDGE_CURVE('',#366714,#366705,#366716,.T.); +#366714 = VERTEX_POINT('',#366715); +#366715 = CARTESIAN_POINT('',(148.57,-153.125,1.51)); +#366716 = LINE('',#366717,#366718); +#366717 = CARTESIAN_POINT('',(148.57,-153.125,1.51)); +#366718 = VECTOR('',#366719,1.); +#366719 = DIRECTION('',(0.,0.,1.)); +#366720 = ORIENTED_EDGE('',*,*,#366721,.F.); +#366721 = EDGE_CURVE('',#366682,#366714,#366722,.T.); +#366722 = CIRCLE('',#366723,0.135001418495); +#366723 = AXIS2_PLACEMENT_3D('',#366724,#366725,#366726); +#366724 = CARTESIAN_POINT('',(148.43499858151,-153.1250014184,1.51)); +#366725 = DIRECTION('',(0.,0.,-1.)); +#366726 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#366727 = CYLINDRICAL_SURFACE('',#366728,0.135001418495); +#366728 = AXIS2_PLACEMENT_3D('',#366729,#366730,#366731); +#366729 = CARTESIAN_POINT('',(148.43499858151,-153.1250014184,1.51)); +#366730 = DIRECTION('',(0.,0.,-1.)); +#366731 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#366732 = ADVANCED_FACE('',(#366733),#366758,.T.); +#366733 = FACE_BOUND('',#366734,.T.); +#366734 = EDGE_LOOP('',(#366735,#366736,#366744,#366752)); +#366735 = ORIENTED_EDGE('',*,*,#366713,.T.); +#366736 = ORIENTED_EDGE('',*,*,#366737,.T.); +#366737 = EDGE_CURVE('',#366705,#366738,#366740,.T.); +#366738 = VERTEX_POINT('',#366739); +#366739 = CARTESIAN_POINT('',(148.57,-153.395,1.55)); +#366740 = LINE('',#366741,#366742); +#366741 = CARTESIAN_POINT('',(148.57,-153.125,1.55)); +#366742 = VECTOR('',#366743,1.); +#366743 = DIRECTION('',(0.,-1.,0.)); +#366744 = ORIENTED_EDGE('',*,*,#366745,.F.); +#366745 = EDGE_CURVE('',#366746,#366738,#366748,.T.); +#366746 = VERTEX_POINT('',#366747); +#366747 = CARTESIAN_POINT('',(148.57,-153.395,1.51)); +#366748 = LINE('',#366749,#366750); +#366749 = CARTESIAN_POINT('',(148.57,-153.395,1.51)); +#366750 = VECTOR('',#366751,1.); +#366751 = DIRECTION('',(0.,0.,1.)); +#366752 = ORIENTED_EDGE('',*,*,#366753,.F.); +#366753 = EDGE_CURVE('',#366714,#366746,#366754,.T.); +#366754 = LINE('',#366755,#366756); +#366755 = CARTESIAN_POINT('',(148.57,-153.125,1.51)); +#366756 = VECTOR('',#366757,1.); +#366757 = DIRECTION('',(0.,-1.,0.)); +#366758 = PLANE('',#366759); +#366759 = AXIS2_PLACEMENT_3D('',#366760,#366761,#366762); +#366760 = CARTESIAN_POINT('',(148.57,-153.125,1.51)); +#366761 = DIRECTION('',(1.,0.,-0.)); +#366762 = DIRECTION('',(0.,-1.,0.)); +#366763 = ADVANCED_FACE('',(#366764),#366791,.T.); +#366764 = FACE_BOUND('',#366765,.T.); +#366765 = EDGE_LOOP('',(#366766,#366767,#366776,#366784)); +#366766 = ORIENTED_EDGE('',*,*,#366745,.T.); +#366767 = ORIENTED_EDGE('',*,*,#366768,.T.); +#366768 = EDGE_CURVE('',#366738,#366769,#366771,.T.); +#366769 = VERTEX_POINT('',#366770); +#366770 = CARTESIAN_POINT('',(148.435,-153.53,1.55)); +#366771 = CIRCLE('',#366772,0.135001418495); +#366772 = AXIS2_PLACEMENT_3D('',#366773,#366774,#366775); +#366773 = CARTESIAN_POINT('',(148.43499858151,-153.3949985815,1.55)); +#366774 = DIRECTION('',(0.,0.,-1.)); +#366775 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#366776 = ORIENTED_EDGE('',*,*,#366777,.F.); +#366777 = EDGE_CURVE('',#366778,#366769,#366780,.T.); +#366778 = VERTEX_POINT('',#366779); +#366779 = CARTESIAN_POINT('',(148.435,-153.53,1.51)); +#366780 = LINE('',#366781,#366782); +#366781 = CARTESIAN_POINT('',(148.435,-153.53,1.51)); +#366782 = VECTOR('',#366783,1.); +#366783 = DIRECTION('',(0.,0.,1.)); +#366784 = ORIENTED_EDGE('',*,*,#366785,.F.); +#366785 = EDGE_CURVE('',#366746,#366778,#366786,.T.); +#366786 = CIRCLE('',#366787,0.135001418495); +#366787 = AXIS2_PLACEMENT_3D('',#366788,#366789,#366790); +#366788 = CARTESIAN_POINT('',(148.43499858151,-153.3949985815,1.51)); +#366789 = DIRECTION('',(0.,0.,-1.)); +#366790 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#366791 = CYLINDRICAL_SURFACE('',#366792,0.135001418495); +#366792 = AXIS2_PLACEMENT_3D('',#366793,#366794,#366795); +#366793 = CARTESIAN_POINT('',(148.43499858151,-153.3949985815,1.51)); +#366794 = DIRECTION('',(0.,0.,-1.)); +#366795 = DIRECTION('',(0.999999999945,-1.050720672682E-05,0.)); +#366796 = ADVANCED_FACE('',(#366797),#366822,.T.); +#366797 = FACE_BOUND('',#366798,.T.); +#366798 = EDGE_LOOP('',(#366799,#366800,#366808,#366816)); +#366799 = ORIENTED_EDGE('',*,*,#366777,.T.); +#366800 = ORIENTED_EDGE('',*,*,#366801,.T.); +#366801 = EDGE_CURVE('',#366769,#366802,#366804,.T.); +#366802 = VERTEX_POINT('',#366803); +#366803 = CARTESIAN_POINT('',(148.065,-153.53,1.55)); +#366804 = LINE('',#366805,#366806); +#366805 = CARTESIAN_POINT('',(148.435,-153.53,1.55)); +#366806 = VECTOR('',#366807,1.); +#366807 = DIRECTION('',(-1.,0.,0.)); +#366808 = ORIENTED_EDGE('',*,*,#366809,.F.); +#366809 = EDGE_CURVE('',#366810,#366802,#366812,.T.); +#366810 = VERTEX_POINT('',#366811); +#366811 = CARTESIAN_POINT('',(148.065,-153.53,1.51)); +#366812 = LINE('',#366813,#366814); +#366813 = CARTESIAN_POINT('',(148.065,-153.53,1.51)); +#366814 = VECTOR('',#366815,1.); +#366815 = DIRECTION('',(0.,0.,1.)); +#366816 = ORIENTED_EDGE('',*,*,#366817,.F.); +#366817 = EDGE_CURVE('',#366778,#366810,#366818,.T.); +#366818 = LINE('',#366819,#366820); +#366819 = CARTESIAN_POINT('',(148.435,-153.53,1.51)); +#366820 = VECTOR('',#366821,1.); +#366821 = DIRECTION('',(-1.,0.,0.)); +#366822 = PLANE('',#366823); +#366823 = AXIS2_PLACEMENT_3D('',#366824,#366825,#366826); +#366824 = CARTESIAN_POINT('',(148.435,-153.53,1.51)); +#366825 = DIRECTION('',(0.,-1.,0.)); +#366826 = DIRECTION('',(-1.,0.,0.)); +#366827 = ADVANCED_FACE('',(#366828),#366855,.T.); +#366828 = FACE_BOUND('',#366829,.T.); +#366829 = EDGE_LOOP('',(#366830,#366831,#366840,#366848)); +#366830 = ORIENTED_EDGE('',*,*,#366809,.T.); +#366831 = ORIENTED_EDGE('',*,*,#366832,.T.); +#366832 = EDGE_CURVE('',#366802,#366833,#366835,.T.); +#366833 = VERTEX_POINT('',#366834); +#366834 = CARTESIAN_POINT('',(147.93,-153.395,1.55)); +#366835 = CIRCLE('',#366836,0.135001418495); +#366836 = AXIS2_PLACEMENT_3D('',#366837,#366838,#366839); +#366837 = CARTESIAN_POINT('',(148.06500141848,-153.3949985815,1.55)); +#366838 = DIRECTION('',(0.,0.,-1.)); +#366839 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#366840 = ORIENTED_EDGE('',*,*,#366841,.F.); +#366841 = EDGE_CURVE('',#366842,#366833,#366844,.T.); +#366842 = VERTEX_POINT('',#366843); +#366843 = CARTESIAN_POINT('',(147.93,-153.395,1.51)); +#366844 = LINE('',#366845,#366846); +#366845 = CARTESIAN_POINT('',(147.93,-153.395,1.51)); +#366846 = VECTOR('',#366847,1.); +#366847 = DIRECTION('',(0.,0.,1.)); +#366848 = ORIENTED_EDGE('',*,*,#366849,.F.); +#366849 = EDGE_CURVE('',#366810,#366842,#366850,.T.); +#366850 = CIRCLE('',#366851,0.135001418495); +#366851 = AXIS2_PLACEMENT_3D('',#366852,#366853,#366854); +#366852 = CARTESIAN_POINT('',(148.06500141848,-153.3949985815,1.51)); +#366853 = DIRECTION('',(0.,0.,-1.)); +#366854 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#366855 = CYLINDRICAL_SURFACE('',#366856,0.135001418495); +#366856 = AXIS2_PLACEMENT_3D('',#366857,#366858,#366859); +#366857 = CARTESIAN_POINT('',(148.06500141848,-153.3949985815,1.51)); +#366858 = DIRECTION('',(0.,0.,-1.)); +#366859 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#366860 = ADVANCED_FACE('',(#366861),#366877,.T.); +#366861 = FACE_BOUND('',#366862,.T.); +#366862 = EDGE_LOOP('',(#366863,#366864,#366870,#366871)); +#366863 = ORIENTED_EDGE('',*,*,#366841,.T.); +#366864 = ORIENTED_EDGE('',*,*,#366865,.T.); +#366865 = EDGE_CURVE('',#366833,#366633,#366866,.T.); +#366866 = LINE('',#366867,#366868); +#366867 = CARTESIAN_POINT('',(147.93,-153.395,1.55)); +#366868 = VECTOR('',#366869,1.); +#366869 = DIRECTION('',(0.,1.,0.)); +#366870 = ORIENTED_EDGE('',*,*,#366630,.F.); +#366871 = ORIENTED_EDGE('',*,*,#366872,.F.); +#366872 = EDGE_CURVE('',#366842,#366631,#366873,.T.); +#366873 = LINE('',#366874,#366875); +#366874 = CARTESIAN_POINT('',(147.93,-153.395,1.51)); +#366875 = VECTOR('',#366876,1.); +#366876 = DIRECTION('',(0.,1.,0.)); +#366877 = PLANE('',#366878); +#366878 = AXIS2_PLACEMENT_3D('',#366879,#366880,#366881); +#366879 = CARTESIAN_POINT('',(147.93,-153.395,1.51)); +#366880 = DIRECTION('',(-1.,0.,0.)); +#366881 = DIRECTION('',(0.,1.,0.)); +#366882 = ADVANCED_FACE('',(#366883),#366893,.F.); +#366883 = FACE_BOUND('',#366884,.T.); +#366884 = EDGE_LOOP('',(#366885,#366886,#366887,#366888,#366889,#366890, + #366891,#366892)); +#366885 = ORIENTED_EDGE('',*,*,#366657,.T.); +#366886 = ORIENTED_EDGE('',*,*,#366689,.T.); +#366887 = ORIENTED_EDGE('',*,*,#366721,.T.); +#366888 = ORIENTED_EDGE('',*,*,#366753,.T.); +#366889 = ORIENTED_EDGE('',*,*,#366785,.T.); +#366890 = ORIENTED_EDGE('',*,*,#366817,.T.); +#366891 = ORIENTED_EDGE('',*,*,#366849,.T.); +#366892 = ORIENTED_EDGE('',*,*,#366872,.T.); +#366893 = PLANE('',#366894); +#366894 = AXIS2_PLACEMENT_3D('',#366895,#366896,#366897); +#366895 = CARTESIAN_POINT('',(0.,0.,1.51)); +#366896 = DIRECTION('',(0.,0.,1.)); +#366897 = DIRECTION('',(1.,0.,-0.)); +#366898 = ADVANCED_FACE('',(#366899),#366909,.T.); +#366899 = FACE_BOUND('',#366900,.F.); +#366900 = EDGE_LOOP('',(#366901,#366902,#366903,#366904,#366905,#366906, + #366907,#366908)); +#366901 = ORIENTED_EDGE('',*,*,#366640,.T.); +#366902 = ORIENTED_EDGE('',*,*,#366673,.T.); +#366903 = ORIENTED_EDGE('',*,*,#366704,.T.); +#366904 = ORIENTED_EDGE('',*,*,#366737,.T.); +#366905 = ORIENTED_EDGE('',*,*,#366768,.T.); +#366906 = ORIENTED_EDGE('',*,*,#366801,.T.); +#366907 = ORIENTED_EDGE('',*,*,#366832,.T.); +#366908 = ORIENTED_EDGE('',*,*,#366865,.T.); +#366909 = PLANE('',#366910); +#366910 = AXIS2_PLACEMENT_3D('',#366911,#366912,#366913); +#366911 = CARTESIAN_POINT('',(0.,0.,1.55)); +#366912 = DIRECTION('',(0.,0.,1.)); +#366913 = DIRECTION('',(1.,0.,-0.)); +#366914 = MANIFOLD_SOLID_BREP('',#366915); +#366915 = CLOSED_SHELL('',(#366916,#366958,#366989,#367022,#367053, + #367086,#367117,#367150,#367172,#367188)); +#366916 = ADVANCED_FACE('',(#366917),#366953,.T.); +#366917 = FACE_BOUND('',#366918,.T.); +#366918 = EDGE_LOOP('',(#366919,#366929,#366938,#366946)); +#366919 = ORIENTED_EDGE('',*,*,#366920,.T.); +#366920 = EDGE_CURVE('',#366921,#366923,#366925,.T.); +#366921 = VERTEX_POINT('',#366922); +#366922 = CARTESIAN_POINT('',(136.1,-152.405,1.51)); +#366923 = VERTEX_POINT('',#366924); +#366924 = CARTESIAN_POINT('',(136.1,-152.405,1.55)); +#366925 = LINE('',#366926,#366927); +#366926 = CARTESIAN_POINT('',(136.1,-152.405,1.51)); +#366927 = VECTOR('',#366928,1.); +#366928 = DIRECTION('',(0.,0.,1.)); +#366929 = ORIENTED_EDGE('',*,*,#366930,.T.); +#366930 = EDGE_CURVE('',#366923,#366931,#366933,.T.); +#366931 = VERTEX_POINT('',#366932); +#366932 = CARTESIAN_POINT('',(136.175,-152.33,1.55)); +#366933 = CIRCLE('',#366934,7.500002932469E-02); +#366934 = AXIS2_PLACEMENT_3D('',#366935,#366936,#366937); +#366935 = CARTESIAN_POINT('',(136.17500002932,-152.4050000293,1.55)); +#366936 = DIRECTION('',(0.,0.,-1.)); +#366937 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#366938 = ORIENTED_EDGE('',*,*,#366939,.F.); +#366939 = EDGE_CURVE('',#366940,#366931,#366942,.T.); +#366940 = VERTEX_POINT('',#366941); +#366941 = CARTESIAN_POINT('',(136.175,-152.33,1.51)); +#366942 = LINE('',#366943,#366944); +#366943 = CARTESIAN_POINT('',(136.175,-152.33,1.51)); +#366944 = VECTOR('',#366945,1.); +#366945 = DIRECTION('',(0.,0.,1.)); +#366946 = ORIENTED_EDGE('',*,*,#366947,.F.); +#366947 = EDGE_CURVE('',#366921,#366940,#366948,.T.); +#366948 = CIRCLE('',#366949,7.500002932469E-02); +#366949 = AXIS2_PLACEMENT_3D('',#366950,#366951,#366952); +#366950 = CARTESIAN_POINT('',(136.17500002932,-152.4050000293,1.51)); +#366951 = DIRECTION('',(0.,0.,-1.)); +#366952 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#366953 = CYLINDRICAL_SURFACE('',#366954,7.500002932469E-02); +#366954 = AXIS2_PLACEMENT_3D('',#366955,#366956,#366957); +#366955 = CARTESIAN_POINT('',(136.17500002932,-152.4050000293,1.51)); +#366956 = DIRECTION('',(0.,0.,-1.)); +#366957 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#366958 = ADVANCED_FACE('',(#366959),#366984,.T.); +#366959 = FACE_BOUND('',#366960,.T.); +#366960 = EDGE_LOOP('',(#366961,#366962,#366970,#366978)); +#366961 = ORIENTED_EDGE('',*,*,#366939,.T.); +#366962 = ORIENTED_EDGE('',*,*,#366963,.T.); +#366963 = EDGE_CURVE('',#366931,#366964,#366966,.T.); +#366964 = VERTEX_POINT('',#366965); +#366965 = CARTESIAN_POINT('',(136.325,-152.33,1.55)); +#366966 = LINE('',#366967,#366968); +#366967 = CARTESIAN_POINT('',(136.175,-152.33,1.55)); +#366968 = VECTOR('',#366969,1.); +#366969 = DIRECTION('',(1.,0.,0.)); +#366970 = ORIENTED_EDGE('',*,*,#366971,.F.); +#366971 = EDGE_CURVE('',#366972,#366964,#366974,.T.); +#366972 = VERTEX_POINT('',#366973); +#366973 = CARTESIAN_POINT('',(136.325,-152.33,1.51)); +#366974 = LINE('',#366975,#366976); +#366975 = CARTESIAN_POINT('',(136.325,-152.33,1.51)); +#366976 = VECTOR('',#366977,1.); +#366977 = DIRECTION('',(0.,0.,1.)); +#366978 = ORIENTED_EDGE('',*,*,#366979,.F.); +#366979 = EDGE_CURVE('',#366940,#366972,#366980,.T.); +#366980 = LINE('',#366981,#366982); +#366981 = CARTESIAN_POINT('',(136.175,-152.33,1.51)); +#366982 = VECTOR('',#366983,1.); +#366983 = DIRECTION('',(1.,0.,0.)); +#366984 = PLANE('',#366985); +#366985 = AXIS2_PLACEMENT_3D('',#366986,#366987,#366988); +#366986 = CARTESIAN_POINT('',(136.175,-152.33,1.51)); +#366987 = DIRECTION('',(0.,1.,0.)); +#366988 = DIRECTION('',(1.,0.,0.)); +#366989 = ADVANCED_FACE('',(#366990),#367017,.T.); +#366990 = FACE_BOUND('',#366991,.T.); +#366991 = EDGE_LOOP('',(#366992,#366993,#367002,#367010)); +#366992 = ORIENTED_EDGE('',*,*,#366971,.T.); +#366993 = ORIENTED_EDGE('',*,*,#366994,.T.); +#366994 = EDGE_CURVE('',#366964,#366995,#366997,.T.); +#366995 = VERTEX_POINT('',#366996); +#366996 = CARTESIAN_POINT('',(136.4,-152.405,1.55)); +#366997 = CIRCLE('',#366998,7.500002932469E-02); +#366998 = AXIS2_PLACEMENT_3D('',#366999,#367000,#367001); +#366999 = CARTESIAN_POINT('',(136.32499997067,-152.4050000293,1.55)); +#367000 = DIRECTION('',(0.,0.,-1.)); +#367001 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367002 = ORIENTED_EDGE('',*,*,#367003,.F.); +#367003 = EDGE_CURVE('',#367004,#366995,#367006,.T.); +#367004 = VERTEX_POINT('',#367005); +#367005 = CARTESIAN_POINT('',(136.4,-152.405,1.51)); +#367006 = LINE('',#367007,#367008); +#367007 = CARTESIAN_POINT('',(136.4,-152.405,1.51)); +#367008 = VECTOR('',#367009,1.); +#367009 = DIRECTION('',(0.,0.,1.)); +#367010 = ORIENTED_EDGE('',*,*,#367011,.F.); +#367011 = EDGE_CURVE('',#366972,#367004,#367012,.T.); +#367012 = CIRCLE('',#367013,7.500002932469E-02); +#367013 = AXIS2_PLACEMENT_3D('',#367014,#367015,#367016); +#367014 = CARTESIAN_POINT('',(136.32499997067,-152.4050000293,1.51)); +#367015 = DIRECTION('',(0.,0.,-1.)); +#367016 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367017 = CYLINDRICAL_SURFACE('',#367018,7.500002932469E-02); +#367018 = AXIS2_PLACEMENT_3D('',#367019,#367020,#367021); +#367019 = CARTESIAN_POINT('',(136.32499997067,-152.4050000293,1.51)); +#367020 = DIRECTION('',(0.,0.,-1.)); +#367021 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367022 = ADVANCED_FACE('',(#367023),#367048,.T.); +#367023 = FACE_BOUND('',#367024,.T.); +#367024 = EDGE_LOOP('',(#367025,#367026,#367034,#367042)); +#367025 = ORIENTED_EDGE('',*,*,#367003,.T.); +#367026 = ORIENTED_EDGE('',*,*,#367027,.T.); +#367027 = EDGE_CURVE('',#366995,#367028,#367030,.T.); +#367028 = VERTEX_POINT('',#367029); +#367029 = CARTESIAN_POINT('',(136.4,-153.705,1.55)); +#367030 = LINE('',#367031,#367032); +#367031 = CARTESIAN_POINT('',(136.4,-152.405,1.55)); +#367032 = VECTOR('',#367033,1.); +#367033 = DIRECTION('',(0.,-1.,0.)); +#367034 = ORIENTED_EDGE('',*,*,#367035,.F.); +#367035 = EDGE_CURVE('',#367036,#367028,#367038,.T.); +#367036 = VERTEX_POINT('',#367037); +#367037 = CARTESIAN_POINT('',(136.4,-153.705,1.51)); +#367038 = LINE('',#367039,#367040); +#367039 = CARTESIAN_POINT('',(136.4,-153.705,1.51)); +#367040 = VECTOR('',#367041,1.); +#367041 = DIRECTION('',(0.,0.,1.)); +#367042 = ORIENTED_EDGE('',*,*,#367043,.F.); +#367043 = EDGE_CURVE('',#367004,#367036,#367044,.T.); +#367044 = LINE('',#367045,#367046); +#367045 = CARTESIAN_POINT('',(136.4,-152.405,1.51)); +#367046 = VECTOR('',#367047,1.); +#367047 = DIRECTION('',(0.,-1.,0.)); +#367048 = PLANE('',#367049); +#367049 = AXIS2_PLACEMENT_3D('',#367050,#367051,#367052); +#367050 = CARTESIAN_POINT('',(136.4,-152.405,1.51)); +#367051 = DIRECTION('',(1.,0.,-0.)); +#367052 = DIRECTION('',(0.,-1.,0.)); +#367053 = ADVANCED_FACE('',(#367054),#367081,.T.); +#367054 = FACE_BOUND('',#367055,.T.); +#367055 = EDGE_LOOP('',(#367056,#367057,#367066,#367074)); +#367056 = ORIENTED_EDGE('',*,*,#367035,.T.); +#367057 = ORIENTED_EDGE('',*,*,#367058,.T.); +#367058 = EDGE_CURVE('',#367028,#367059,#367061,.T.); +#367059 = VERTEX_POINT('',#367060); +#367060 = CARTESIAN_POINT('',(136.325,-153.78,1.55)); +#367061 = CIRCLE('',#367062,7.500002932469E-02); +#367062 = AXIS2_PLACEMENT_3D('',#367063,#367064,#367065); +#367063 = CARTESIAN_POINT('',(136.32499997067,-153.7049999706,1.55)); +#367064 = DIRECTION('',(0.,0.,-1.)); +#367065 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367066 = ORIENTED_EDGE('',*,*,#367067,.F.); +#367067 = EDGE_CURVE('',#367068,#367059,#367070,.T.); +#367068 = VERTEX_POINT('',#367069); +#367069 = CARTESIAN_POINT('',(136.325,-153.78,1.51)); +#367070 = LINE('',#367071,#367072); +#367071 = CARTESIAN_POINT('',(136.325,-153.78,1.51)); +#367072 = VECTOR('',#367073,1.); +#367073 = DIRECTION('',(0.,0.,1.)); +#367074 = ORIENTED_EDGE('',*,*,#367075,.F.); +#367075 = EDGE_CURVE('',#367036,#367068,#367076,.T.); +#367076 = CIRCLE('',#367077,7.500002932469E-02); +#367077 = AXIS2_PLACEMENT_3D('',#367078,#367079,#367080); +#367078 = CARTESIAN_POINT('',(136.32499997067,-153.7049999706,1.51)); +#367079 = DIRECTION('',(0.,0.,-1.)); +#367080 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367081 = CYLINDRICAL_SURFACE('',#367082,7.500002932469E-02); +#367082 = AXIS2_PLACEMENT_3D('',#367083,#367084,#367085); +#367083 = CARTESIAN_POINT('',(136.32499997067,-153.7049999706,1.51)); +#367084 = DIRECTION('',(0.,0.,-1.)); +#367085 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367086 = ADVANCED_FACE('',(#367087),#367112,.T.); +#367087 = FACE_BOUND('',#367088,.T.); +#367088 = EDGE_LOOP('',(#367089,#367090,#367098,#367106)); +#367089 = ORIENTED_EDGE('',*,*,#367067,.T.); +#367090 = ORIENTED_EDGE('',*,*,#367091,.T.); +#367091 = EDGE_CURVE('',#367059,#367092,#367094,.T.); +#367092 = VERTEX_POINT('',#367093); +#367093 = CARTESIAN_POINT('',(136.175,-153.78,1.55)); +#367094 = LINE('',#367095,#367096); +#367095 = CARTESIAN_POINT('',(136.325,-153.78,1.55)); +#367096 = VECTOR('',#367097,1.); +#367097 = DIRECTION('',(-1.,0.,0.)); +#367098 = ORIENTED_EDGE('',*,*,#367099,.F.); +#367099 = EDGE_CURVE('',#367100,#367092,#367102,.T.); +#367100 = VERTEX_POINT('',#367101); +#367101 = CARTESIAN_POINT('',(136.175,-153.78,1.51)); +#367102 = LINE('',#367103,#367104); +#367103 = CARTESIAN_POINT('',(136.175,-153.78,1.51)); +#367104 = VECTOR('',#367105,1.); +#367105 = DIRECTION('',(0.,0.,1.)); +#367106 = ORIENTED_EDGE('',*,*,#367107,.F.); +#367107 = EDGE_CURVE('',#367068,#367100,#367108,.T.); +#367108 = LINE('',#367109,#367110); +#367109 = CARTESIAN_POINT('',(136.325,-153.78,1.51)); +#367110 = VECTOR('',#367111,1.); +#367111 = DIRECTION('',(-1.,0.,0.)); +#367112 = PLANE('',#367113); +#367113 = AXIS2_PLACEMENT_3D('',#367114,#367115,#367116); +#367114 = CARTESIAN_POINT('',(136.325,-153.78,1.51)); +#367115 = DIRECTION('',(0.,-1.,0.)); +#367116 = DIRECTION('',(-1.,0.,0.)); +#367117 = ADVANCED_FACE('',(#367118),#367145,.T.); +#367118 = FACE_BOUND('',#367119,.T.); +#367119 = EDGE_LOOP('',(#367120,#367121,#367130,#367138)); +#367120 = ORIENTED_EDGE('',*,*,#367099,.T.); +#367121 = ORIENTED_EDGE('',*,*,#367122,.T.); +#367122 = EDGE_CURVE('',#367092,#367123,#367125,.T.); +#367123 = VERTEX_POINT('',#367124); +#367124 = CARTESIAN_POINT('',(136.1,-153.705,1.55)); +#367125 = CIRCLE('',#367126,7.500002932469E-02); +#367126 = AXIS2_PLACEMENT_3D('',#367127,#367128,#367129); +#367127 = CARTESIAN_POINT('',(136.17500002932,-153.7049999706,1.55)); +#367128 = DIRECTION('',(0.,0.,-1.)); +#367129 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#367130 = ORIENTED_EDGE('',*,*,#367131,.F.); +#367131 = EDGE_CURVE('',#367132,#367123,#367134,.T.); +#367132 = VERTEX_POINT('',#367133); +#367133 = CARTESIAN_POINT('',(136.1,-153.705,1.51)); +#367134 = LINE('',#367135,#367136); +#367135 = CARTESIAN_POINT('',(136.1,-153.705,1.51)); +#367136 = VECTOR('',#367137,1.); +#367137 = DIRECTION('',(0.,0.,1.)); +#367138 = ORIENTED_EDGE('',*,*,#367139,.F.); +#367139 = EDGE_CURVE('',#367100,#367132,#367140,.T.); +#367140 = CIRCLE('',#367141,7.500002932469E-02); +#367141 = AXIS2_PLACEMENT_3D('',#367142,#367143,#367144); +#367142 = CARTESIAN_POINT('',(136.17500002932,-153.7049999706,1.51)); +#367143 = DIRECTION('',(0.,0.,-1.)); +#367144 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#367145 = CYLINDRICAL_SURFACE('',#367146,7.500002932469E-02); +#367146 = AXIS2_PLACEMENT_3D('',#367147,#367148,#367149); +#367147 = CARTESIAN_POINT('',(136.17500002932,-153.7049999706,1.51)); +#367148 = DIRECTION('',(0.,0.,-1.)); +#367149 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#367150 = ADVANCED_FACE('',(#367151),#367167,.T.); +#367151 = FACE_BOUND('',#367152,.T.); +#367152 = EDGE_LOOP('',(#367153,#367154,#367160,#367161)); +#367153 = ORIENTED_EDGE('',*,*,#367131,.T.); +#367154 = ORIENTED_EDGE('',*,*,#367155,.T.); +#367155 = EDGE_CURVE('',#367123,#366923,#367156,.T.); +#367156 = LINE('',#367157,#367158); +#367157 = CARTESIAN_POINT('',(136.1,-153.705,1.55)); +#367158 = VECTOR('',#367159,1.); +#367159 = DIRECTION('',(0.,1.,0.)); +#367160 = ORIENTED_EDGE('',*,*,#366920,.F.); +#367161 = ORIENTED_EDGE('',*,*,#367162,.F.); +#367162 = EDGE_CURVE('',#367132,#366921,#367163,.T.); +#367163 = LINE('',#367164,#367165); +#367164 = CARTESIAN_POINT('',(136.1,-153.705,1.51)); +#367165 = VECTOR('',#367166,1.); +#367166 = DIRECTION('',(0.,1.,0.)); +#367167 = PLANE('',#367168); +#367168 = AXIS2_PLACEMENT_3D('',#367169,#367170,#367171); +#367169 = CARTESIAN_POINT('',(136.1,-153.705,1.51)); +#367170 = DIRECTION('',(-1.,0.,0.)); +#367171 = DIRECTION('',(0.,1.,0.)); +#367172 = ADVANCED_FACE('',(#367173),#367183,.F.); +#367173 = FACE_BOUND('',#367174,.T.); +#367174 = EDGE_LOOP('',(#367175,#367176,#367177,#367178,#367179,#367180, + #367181,#367182)); +#367175 = ORIENTED_EDGE('',*,*,#366947,.T.); +#367176 = ORIENTED_EDGE('',*,*,#366979,.T.); +#367177 = ORIENTED_EDGE('',*,*,#367011,.T.); +#367178 = ORIENTED_EDGE('',*,*,#367043,.T.); +#367179 = ORIENTED_EDGE('',*,*,#367075,.T.); +#367180 = ORIENTED_EDGE('',*,*,#367107,.T.); +#367181 = ORIENTED_EDGE('',*,*,#367139,.T.); +#367182 = ORIENTED_EDGE('',*,*,#367162,.T.); +#367183 = PLANE('',#367184); +#367184 = AXIS2_PLACEMENT_3D('',#367185,#367186,#367187); +#367185 = CARTESIAN_POINT('',(0.,0.,1.51)); +#367186 = DIRECTION('',(0.,0.,1.)); +#367187 = DIRECTION('',(1.,0.,-0.)); +#367188 = ADVANCED_FACE('',(#367189),#367199,.T.); +#367189 = FACE_BOUND('',#367190,.F.); +#367190 = EDGE_LOOP('',(#367191,#367192,#367193,#367194,#367195,#367196, + #367197,#367198)); +#367191 = ORIENTED_EDGE('',*,*,#366930,.T.); +#367192 = ORIENTED_EDGE('',*,*,#366963,.T.); +#367193 = ORIENTED_EDGE('',*,*,#366994,.T.); +#367194 = ORIENTED_EDGE('',*,*,#367027,.T.); +#367195 = ORIENTED_EDGE('',*,*,#367058,.T.); +#367196 = ORIENTED_EDGE('',*,*,#367091,.T.); +#367197 = ORIENTED_EDGE('',*,*,#367122,.T.); +#367198 = ORIENTED_EDGE('',*,*,#367155,.T.); +#367199 = PLANE('',#367200); +#367200 = AXIS2_PLACEMENT_3D('',#367201,#367202,#367203); +#367201 = CARTESIAN_POINT('',(0.,0.,1.55)); +#367202 = DIRECTION('',(0.,0.,1.)); +#367203 = DIRECTION('',(1.,0.,-0.)); +#367204 = MANIFOLD_SOLID_BREP('',#367205); +#367205 = CLOSED_SHELL('',(#367206,#367248,#367279,#367312,#367343, + #367376,#367407,#367440,#367462,#367478)); +#367206 = ADVANCED_FACE('',(#367207),#367243,.T.); +#367207 = FACE_BOUND('',#367208,.T.); +#367208 = EDGE_LOOP('',(#367209,#367219,#367228,#367236)); +#367209 = ORIENTED_EDGE('',*,*,#367210,.T.); +#367210 = EDGE_CURVE('',#367211,#367213,#367215,.T.); +#367211 = VERTEX_POINT('',#367212); +#367212 = CARTESIAN_POINT('',(129.93,-153.115,1.51)); +#367213 = VERTEX_POINT('',#367214); +#367214 = CARTESIAN_POINT('',(129.93,-153.115,1.55)); +#367215 = LINE('',#367216,#367217); +#367216 = CARTESIAN_POINT('',(129.93,-153.115,1.51)); +#367217 = VECTOR('',#367218,1.); +#367218 = DIRECTION('',(0.,0.,1.)); +#367219 = ORIENTED_EDGE('',*,*,#367220,.T.); +#367220 = EDGE_CURVE('',#367213,#367221,#367223,.T.); +#367221 = VERTEX_POINT('',#367222); +#367222 = CARTESIAN_POINT('',(130.065,-152.98,1.55)); +#367223 = CIRCLE('',#367224,0.135001418495); +#367224 = AXIS2_PLACEMENT_3D('',#367225,#367226,#367227); +#367225 = CARTESIAN_POINT('',(130.06500141848,-153.1150014184,1.55)); +#367226 = DIRECTION('',(0.,0.,-1.)); +#367227 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#367228 = ORIENTED_EDGE('',*,*,#367229,.F.); +#367229 = EDGE_CURVE('',#367230,#367221,#367232,.T.); +#367230 = VERTEX_POINT('',#367231); +#367231 = CARTESIAN_POINT('',(130.065,-152.98,1.51)); +#367232 = LINE('',#367233,#367234); +#367233 = CARTESIAN_POINT('',(130.065,-152.98,1.51)); +#367234 = VECTOR('',#367235,1.); +#367235 = DIRECTION('',(0.,0.,1.)); +#367236 = ORIENTED_EDGE('',*,*,#367237,.F.); +#367237 = EDGE_CURVE('',#367211,#367230,#367238,.T.); +#367238 = CIRCLE('',#367239,0.135001418495); +#367239 = AXIS2_PLACEMENT_3D('',#367240,#367241,#367242); +#367240 = CARTESIAN_POINT('',(130.06500141848,-153.1150014184,1.51)); +#367241 = DIRECTION('',(0.,0.,-1.)); +#367242 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#367243 = CYLINDRICAL_SURFACE('',#367244,0.135001418495); +#367244 = AXIS2_PLACEMENT_3D('',#367245,#367246,#367247); +#367245 = CARTESIAN_POINT('',(130.06500141848,-153.1150014184,1.51)); +#367246 = DIRECTION('',(0.,0.,-1.)); +#367247 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#367248 = ADVANCED_FACE('',(#367249),#367274,.T.); +#367249 = FACE_BOUND('',#367250,.T.); +#367250 = EDGE_LOOP('',(#367251,#367252,#367260,#367268)); +#367251 = ORIENTED_EDGE('',*,*,#367229,.T.); +#367252 = ORIENTED_EDGE('',*,*,#367253,.T.); +#367253 = EDGE_CURVE('',#367221,#367254,#367256,.T.); +#367254 = VERTEX_POINT('',#367255); +#367255 = CARTESIAN_POINT('',(130.435,-152.98,1.55)); +#367256 = LINE('',#367257,#367258); +#367257 = CARTESIAN_POINT('',(130.065,-152.98,1.55)); +#367258 = VECTOR('',#367259,1.); +#367259 = DIRECTION('',(1.,0.,0.)); +#367260 = ORIENTED_EDGE('',*,*,#367261,.F.); +#367261 = EDGE_CURVE('',#367262,#367254,#367264,.T.); +#367262 = VERTEX_POINT('',#367263); +#367263 = CARTESIAN_POINT('',(130.435,-152.98,1.51)); +#367264 = LINE('',#367265,#367266); +#367265 = CARTESIAN_POINT('',(130.435,-152.98,1.51)); +#367266 = VECTOR('',#367267,1.); +#367267 = DIRECTION('',(0.,0.,1.)); +#367268 = ORIENTED_EDGE('',*,*,#367269,.F.); +#367269 = EDGE_CURVE('',#367230,#367262,#367270,.T.); +#367270 = LINE('',#367271,#367272); +#367271 = CARTESIAN_POINT('',(130.065,-152.98,1.51)); +#367272 = VECTOR('',#367273,1.); +#367273 = DIRECTION('',(1.,0.,0.)); +#367274 = PLANE('',#367275); +#367275 = AXIS2_PLACEMENT_3D('',#367276,#367277,#367278); +#367276 = CARTESIAN_POINT('',(130.065,-152.98,1.51)); +#367277 = DIRECTION('',(0.,1.,0.)); +#367278 = DIRECTION('',(1.,0.,0.)); +#367279 = ADVANCED_FACE('',(#367280),#367307,.T.); +#367280 = FACE_BOUND('',#367281,.T.); +#367281 = EDGE_LOOP('',(#367282,#367283,#367292,#367300)); +#367282 = ORIENTED_EDGE('',*,*,#367261,.T.); +#367283 = ORIENTED_EDGE('',*,*,#367284,.T.); +#367284 = EDGE_CURVE('',#367254,#367285,#367287,.T.); +#367285 = VERTEX_POINT('',#367286); +#367286 = CARTESIAN_POINT('',(130.57,-153.115,1.55)); +#367287 = CIRCLE('',#367288,0.135001418495); +#367288 = AXIS2_PLACEMENT_3D('',#367289,#367290,#367291); +#367289 = CARTESIAN_POINT('',(130.43499858151,-153.1150014184,1.55)); +#367290 = DIRECTION('',(0.,0.,-1.)); +#367291 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#367292 = ORIENTED_EDGE('',*,*,#367293,.F.); +#367293 = EDGE_CURVE('',#367294,#367285,#367296,.T.); +#367294 = VERTEX_POINT('',#367295); +#367295 = CARTESIAN_POINT('',(130.57,-153.115,1.51)); +#367296 = LINE('',#367297,#367298); +#367297 = CARTESIAN_POINT('',(130.57,-153.115,1.51)); +#367298 = VECTOR('',#367299,1.); +#367299 = DIRECTION('',(0.,0.,1.)); +#367300 = ORIENTED_EDGE('',*,*,#367301,.F.); +#367301 = EDGE_CURVE('',#367262,#367294,#367302,.T.); +#367302 = CIRCLE('',#367303,0.135001418495); +#367303 = AXIS2_PLACEMENT_3D('',#367304,#367305,#367306); +#367304 = CARTESIAN_POINT('',(130.43499858151,-153.1150014184,1.51)); +#367305 = DIRECTION('',(0.,0.,-1.)); +#367306 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#367307 = CYLINDRICAL_SURFACE('',#367308,0.135001418495); +#367308 = AXIS2_PLACEMENT_3D('',#367309,#367310,#367311); +#367309 = CARTESIAN_POINT('',(130.43499858151,-153.1150014184,1.51)); +#367310 = DIRECTION('',(0.,0.,-1.)); +#367311 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#367312 = ADVANCED_FACE('',(#367313),#367338,.T.); +#367313 = FACE_BOUND('',#367314,.T.); +#367314 = EDGE_LOOP('',(#367315,#367316,#367324,#367332)); +#367315 = ORIENTED_EDGE('',*,*,#367293,.T.); +#367316 = ORIENTED_EDGE('',*,*,#367317,.T.); +#367317 = EDGE_CURVE('',#367285,#367318,#367320,.T.); +#367318 = VERTEX_POINT('',#367319); +#367319 = CARTESIAN_POINT('',(130.57,-153.385,1.55)); +#367320 = LINE('',#367321,#367322); +#367321 = CARTESIAN_POINT('',(130.57,-153.115,1.55)); +#367322 = VECTOR('',#367323,1.); +#367323 = DIRECTION('',(0.,-1.,0.)); +#367324 = ORIENTED_EDGE('',*,*,#367325,.F.); +#367325 = EDGE_CURVE('',#367326,#367318,#367328,.T.); +#367326 = VERTEX_POINT('',#367327); +#367327 = CARTESIAN_POINT('',(130.57,-153.385,1.51)); +#367328 = LINE('',#367329,#367330); +#367329 = CARTESIAN_POINT('',(130.57,-153.385,1.51)); +#367330 = VECTOR('',#367331,1.); +#367331 = DIRECTION('',(0.,0.,1.)); +#367332 = ORIENTED_EDGE('',*,*,#367333,.F.); +#367333 = EDGE_CURVE('',#367294,#367326,#367334,.T.); +#367334 = LINE('',#367335,#367336); +#367335 = CARTESIAN_POINT('',(130.57,-153.115,1.51)); +#367336 = VECTOR('',#367337,1.); +#367337 = DIRECTION('',(0.,-1.,0.)); +#367338 = PLANE('',#367339); +#367339 = AXIS2_PLACEMENT_3D('',#367340,#367341,#367342); +#367340 = CARTESIAN_POINT('',(130.57,-153.115,1.51)); +#367341 = DIRECTION('',(1.,0.,-0.)); +#367342 = DIRECTION('',(0.,-1.,0.)); +#367343 = ADVANCED_FACE('',(#367344),#367371,.T.); +#367344 = FACE_BOUND('',#367345,.T.); +#367345 = EDGE_LOOP('',(#367346,#367347,#367356,#367364)); +#367346 = ORIENTED_EDGE('',*,*,#367325,.T.); +#367347 = ORIENTED_EDGE('',*,*,#367348,.T.); +#367348 = EDGE_CURVE('',#367318,#367349,#367351,.T.); +#367349 = VERTEX_POINT('',#367350); +#367350 = CARTESIAN_POINT('',(130.435,-153.52,1.55)); +#367351 = CIRCLE('',#367352,0.135001418495); +#367352 = AXIS2_PLACEMENT_3D('',#367353,#367354,#367355); +#367353 = CARTESIAN_POINT('',(130.43499858151,-153.3849985815,1.55)); +#367354 = DIRECTION('',(0.,0.,-1.)); +#367355 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367356 = ORIENTED_EDGE('',*,*,#367357,.F.); +#367357 = EDGE_CURVE('',#367358,#367349,#367360,.T.); +#367358 = VERTEX_POINT('',#367359); +#367359 = CARTESIAN_POINT('',(130.435,-153.52,1.51)); +#367360 = LINE('',#367361,#367362); +#367361 = CARTESIAN_POINT('',(130.435,-153.52,1.51)); +#367362 = VECTOR('',#367363,1.); +#367363 = DIRECTION('',(0.,0.,1.)); +#367364 = ORIENTED_EDGE('',*,*,#367365,.F.); +#367365 = EDGE_CURVE('',#367326,#367358,#367366,.T.); +#367366 = CIRCLE('',#367367,0.135001418495); +#367367 = AXIS2_PLACEMENT_3D('',#367368,#367369,#367370); +#367368 = CARTESIAN_POINT('',(130.43499858151,-153.3849985815,1.51)); +#367369 = DIRECTION('',(0.,0.,-1.)); +#367370 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367371 = CYLINDRICAL_SURFACE('',#367372,0.135001418495); +#367372 = AXIS2_PLACEMENT_3D('',#367373,#367374,#367375); +#367373 = CARTESIAN_POINT('',(130.43499858151,-153.3849985815,1.51)); +#367374 = DIRECTION('',(0.,0.,-1.)); +#367375 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367376 = ADVANCED_FACE('',(#367377),#367402,.T.); +#367377 = FACE_BOUND('',#367378,.T.); +#367378 = EDGE_LOOP('',(#367379,#367380,#367388,#367396)); +#367379 = ORIENTED_EDGE('',*,*,#367357,.T.); +#367380 = ORIENTED_EDGE('',*,*,#367381,.T.); +#367381 = EDGE_CURVE('',#367349,#367382,#367384,.T.); +#367382 = VERTEX_POINT('',#367383); +#367383 = CARTESIAN_POINT('',(130.065,-153.52,1.55)); +#367384 = LINE('',#367385,#367386); +#367385 = CARTESIAN_POINT('',(130.435,-153.52,1.55)); +#367386 = VECTOR('',#367387,1.); +#367387 = DIRECTION('',(-1.,0.,0.)); +#367388 = ORIENTED_EDGE('',*,*,#367389,.F.); +#367389 = EDGE_CURVE('',#367390,#367382,#367392,.T.); +#367390 = VERTEX_POINT('',#367391); +#367391 = CARTESIAN_POINT('',(130.065,-153.52,1.51)); +#367392 = LINE('',#367393,#367394); +#367393 = CARTESIAN_POINT('',(130.065,-153.52,1.51)); +#367394 = VECTOR('',#367395,1.); +#367395 = DIRECTION('',(0.,0.,1.)); +#367396 = ORIENTED_EDGE('',*,*,#367397,.F.); +#367397 = EDGE_CURVE('',#367358,#367390,#367398,.T.); +#367398 = LINE('',#367399,#367400); +#367399 = CARTESIAN_POINT('',(130.435,-153.52,1.51)); +#367400 = VECTOR('',#367401,1.); +#367401 = DIRECTION('',(-1.,0.,0.)); +#367402 = PLANE('',#367403); +#367403 = AXIS2_PLACEMENT_3D('',#367404,#367405,#367406); +#367404 = CARTESIAN_POINT('',(130.435,-153.52,1.51)); +#367405 = DIRECTION('',(0.,-1.,0.)); +#367406 = DIRECTION('',(-1.,0.,0.)); +#367407 = ADVANCED_FACE('',(#367408),#367435,.T.); +#367408 = FACE_BOUND('',#367409,.T.); +#367409 = EDGE_LOOP('',(#367410,#367411,#367420,#367428)); +#367410 = ORIENTED_EDGE('',*,*,#367389,.T.); +#367411 = ORIENTED_EDGE('',*,*,#367412,.T.); +#367412 = EDGE_CURVE('',#367382,#367413,#367415,.T.); +#367413 = VERTEX_POINT('',#367414); +#367414 = CARTESIAN_POINT('',(129.93,-153.385,1.55)); +#367415 = CIRCLE('',#367416,0.135001418495); +#367416 = AXIS2_PLACEMENT_3D('',#367417,#367418,#367419); +#367417 = CARTESIAN_POINT('',(130.06500141848,-153.3849985815,1.55)); +#367418 = DIRECTION('',(0.,0.,-1.)); +#367419 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#367420 = ORIENTED_EDGE('',*,*,#367421,.F.); +#367421 = EDGE_CURVE('',#367422,#367413,#367424,.T.); +#367422 = VERTEX_POINT('',#367423); +#367423 = CARTESIAN_POINT('',(129.93,-153.385,1.51)); +#367424 = LINE('',#367425,#367426); +#367425 = CARTESIAN_POINT('',(129.93,-153.385,1.51)); +#367426 = VECTOR('',#367427,1.); +#367427 = DIRECTION('',(0.,0.,1.)); +#367428 = ORIENTED_EDGE('',*,*,#367429,.F.); +#367429 = EDGE_CURVE('',#367390,#367422,#367430,.T.); +#367430 = CIRCLE('',#367431,0.135001418495); +#367431 = AXIS2_PLACEMENT_3D('',#367432,#367433,#367434); +#367432 = CARTESIAN_POINT('',(130.06500141848,-153.3849985815,1.51)); +#367433 = DIRECTION('',(0.,0.,-1.)); +#367434 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#367435 = CYLINDRICAL_SURFACE('',#367436,0.135001418495); +#367436 = AXIS2_PLACEMENT_3D('',#367437,#367438,#367439); +#367437 = CARTESIAN_POINT('',(130.06500141848,-153.3849985815,1.51)); +#367438 = DIRECTION('',(0.,0.,-1.)); +#367439 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#367440 = ADVANCED_FACE('',(#367441),#367457,.T.); +#367441 = FACE_BOUND('',#367442,.T.); +#367442 = EDGE_LOOP('',(#367443,#367444,#367450,#367451)); +#367443 = ORIENTED_EDGE('',*,*,#367421,.T.); +#367444 = ORIENTED_EDGE('',*,*,#367445,.T.); +#367445 = EDGE_CURVE('',#367413,#367213,#367446,.T.); +#367446 = LINE('',#367447,#367448); +#367447 = CARTESIAN_POINT('',(129.93,-153.385,1.55)); +#367448 = VECTOR('',#367449,1.); +#367449 = DIRECTION('',(0.,1.,0.)); +#367450 = ORIENTED_EDGE('',*,*,#367210,.F.); +#367451 = ORIENTED_EDGE('',*,*,#367452,.F.); +#367452 = EDGE_CURVE('',#367422,#367211,#367453,.T.); +#367453 = LINE('',#367454,#367455); +#367454 = CARTESIAN_POINT('',(129.93,-153.385,1.51)); +#367455 = VECTOR('',#367456,1.); +#367456 = DIRECTION('',(0.,1.,0.)); +#367457 = PLANE('',#367458); +#367458 = AXIS2_PLACEMENT_3D('',#367459,#367460,#367461); +#367459 = CARTESIAN_POINT('',(129.93,-153.385,1.51)); +#367460 = DIRECTION('',(-1.,0.,0.)); +#367461 = DIRECTION('',(0.,1.,0.)); +#367462 = ADVANCED_FACE('',(#367463),#367473,.F.); +#367463 = FACE_BOUND('',#367464,.T.); +#367464 = EDGE_LOOP('',(#367465,#367466,#367467,#367468,#367469,#367470, + #367471,#367472)); +#367465 = ORIENTED_EDGE('',*,*,#367237,.T.); +#367466 = ORIENTED_EDGE('',*,*,#367269,.T.); +#367467 = ORIENTED_EDGE('',*,*,#367301,.T.); +#367468 = ORIENTED_EDGE('',*,*,#367333,.T.); +#367469 = ORIENTED_EDGE('',*,*,#367365,.T.); +#367470 = ORIENTED_EDGE('',*,*,#367397,.T.); +#367471 = ORIENTED_EDGE('',*,*,#367429,.T.); +#367472 = ORIENTED_EDGE('',*,*,#367452,.T.); +#367473 = PLANE('',#367474); +#367474 = AXIS2_PLACEMENT_3D('',#367475,#367476,#367477); +#367475 = CARTESIAN_POINT('',(0.,0.,1.51)); +#367476 = DIRECTION('',(0.,0.,1.)); +#367477 = DIRECTION('',(1.,0.,-0.)); +#367478 = ADVANCED_FACE('',(#367479),#367489,.T.); +#367479 = FACE_BOUND('',#367480,.F.); +#367480 = EDGE_LOOP('',(#367481,#367482,#367483,#367484,#367485,#367486, + #367487,#367488)); +#367481 = ORIENTED_EDGE('',*,*,#367220,.T.); +#367482 = ORIENTED_EDGE('',*,*,#367253,.T.); +#367483 = ORIENTED_EDGE('',*,*,#367284,.T.); +#367484 = ORIENTED_EDGE('',*,*,#367317,.T.); +#367485 = ORIENTED_EDGE('',*,*,#367348,.T.); +#367486 = ORIENTED_EDGE('',*,*,#367381,.T.); +#367487 = ORIENTED_EDGE('',*,*,#367412,.T.); +#367488 = ORIENTED_EDGE('',*,*,#367445,.T.); +#367489 = PLANE('',#367490); +#367490 = AXIS2_PLACEMENT_3D('',#367491,#367492,#367493); +#367491 = CARTESIAN_POINT('',(0.,0.,1.55)); +#367492 = DIRECTION('',(0.,0.,1.)); +#367493 = DIRECTION('',(1.,0.,-0.)); +#367494 = MANIFOLD_SOLID_BREP('',#367495); +#367495 = CLOSED_SHELL('',(#367496,#367538,#367569,#367602,#367633, + #367666,#367697,#367730,#367752,#367768)); +#367496 = ADVANCED_FACE('',(#367497),#367533,.T.); +#367497 = FACE_BOUND('',#367498,.T.); +#367498 = EDGE_LOOP('',(#367499,#367509,#367518,#367526)); +#367499 = ORIENTED_EDGE('',*,*,#367500,.T.); +#367500 = EDGE_CURVE('',#367501,#367503,#367505,.T.); +#367501 = VERTEX_POINT('',#367502); +#367502 = CARTESIAN_POINT('',(143.47,-152.565,1.51)); +#367503 = VERTEX_POINT('',#367504); +#367504 = CARTESIAN_POINT('',(143.47,-152.565,1.55)); +#367505 = LINE('',#367506,#367507); +#367506 = CARTESIAN_POINT('',(143.47,-152.565,1.51)); +#367507 = VECTOR('',#367508,1.); +#367508 = DIRECTION('',(0.,0.,1.)); +#367509 = ORIENTED_EDGE('',*,*,#367510,.T.); +#367510 = EDGE_CURVE('',#367503,#367511,#367513,.T.); +#367511 = VERTEX_POINT('',#367512); +#367512 = CARTESIAN_POINT('',(143.605,-152.43,1.55)); +#367513 = CIRCLE('',#367514,0.135001418495); +#367514 = AXIS2_PLACEMENT_3D('',#367515,#367516,#367517); +#367515 = CARTESIAN_POINT('',(143.60500141848,-152.5650014184,1.55)); +#367516 = DIRECTION('',(0.,0.,-1.)); +#367517 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#367518 = ORIENTED_EDGE('',*,*,#367519,.F.); +#367519 = EDGE_CURVE('',#367520,#367511,#367522,.T.); +#367520 = VERTEX_POINT('',#367521); +#367521 = CARTESIAN_POINT('',(143.605,-152.43,1.51)); +#367522 = LINE('',#367523,#367524); +#367523 = CARTESIAN_POINT('',(143.605,-152.43,1.51)); +#367524 = VECTOR('',#367525,1.); +#367525 = DIRECTION('',(0.,0.,1.)); +#367526 = ORIENTED_EDGE('',*,*,#367527,.F.); +#367527 = EDGE_CURVE('',#367501,#367520,#367528,.T.); +#367528 = CIRCLE('',#367529,0.135001418495); +#367529 = AXIS2_PLACEMENT_3D('',#367530,#367531,#367532); +#367530 = CARTESIAN_POINT('',(143.60500141848,-152.5650014184,1.51)); +#367531 = DIRECTION('',(0.,0.,-1.)); +#367532 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#367533 = CYLINDRICAL_SURFACE('',#367534,0.135001418495); +#367534 = AXIS2_PLACEMENT_3D('',#367535,#367536,#367537); +#367535 = CARTESIAN_POINT('',(143.60500141848,-152.5650014184,1.51)); +#367536 = DIRECTION('',(0.,0.,-1.)); +#367537 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#367538 = ADVANCED_FACE('',(#367539),#367564,.T.); +#367539 = FACE_BOUND('',#367540,.T.); +#367540 = EDGE_LOOP('',(#367541,#367542,#367550,#367558)); +#367541 = ORIENTED_EDGE('',*,*,#367519,.T.); +#367542 = ORIENTED_EDGE('',*,*,#367543,.T.); +#367543 = EDGE_CURVE('',#367511,#367544,#367546,.T.); +#367544 = VERTEX_POINT('',#367545); +#367545 = CARTESIAN_POINT('',(143.875,-152.43,1.55)); +#367546 = LINE('',#367547,#367548); +#367547 = CARTESIAN_POINT('',(143.605,-152.43,1.55)); +#367548 = VECTOR('',#367549,1.); +#367549 = DIRECTION('',(1.,0.,0.)); +#367550 = ORIENTED_EDGE('',*,*,#367551,.F.); +#367551 = EDGE_CURVE('',#367552,#367544,#367554,.T.); +#367552 = VERTEX_POINT('',#367553); +#367553 = CARTESIAN_POINT('',(143.875,-152.43,1.51)); +#367554 = LINE('',#367555,#367556); +#367555 = CARTESIAN_POINT('',(143.875,-152.43,1.51)); +#367556 = VECTOR('',#367557,1.); +#367557 = DIRECTION('',(0.,0.,1.)); +#367558 = ORIENTED_EDGE('',*,*,#367559,.F.); +#367559 = EDGE_CURVE('',#367520,#367552,#367560,.T.); +#367560 = LINE('',#367561,#367562); +#367561 = CARTESIAN_POINT('',(143.605,-152.43,1.51)); +#367562 = VECTOR('',#367563,1.); +#367563 = DIRECTION('',(1.,0.,0.)); +#367564 = PLANE('',#367565); +#367565 = AXIS2_PLACEMENT_3D('',#367566,#367567,#367568); +#367566 = CARTESIAN_POINT('',(143.605,-152.43,1.51)); +#367567 = DIRECTION('',(0.,1.,0.)); +#367568 = DIRECTION('',(1.,0.,0.)); +#367569 = ADVANCED_FACE('',(#367570),#367597,.T.); +#367570 = FACE_BOUND('',#367571,.T.); +#367571 = EDGE_LOOP('',(#367572,#367573,#367582,#367590)); +#367572 = ORIENTED_EDGE('',*,*,#367551,.T.); +#367573 = ORIENTED_EDGE('',*,*,#367574,.T.); +#367574 = EDGE_CURVE('',#367544,#367575,#367577,.T.); +#367575 = VERTEX_POINT('',#367576); +#367576 = CARTESIAN_POINT('',(144.01,-152.565,1.55)); +#367577 = CIRCLE('',#367578,0.135001418495); +#367578 = AXIS2_PLACEMENT_3D('',#367579,#367580,#367581); +#367579 = CARTESIAN_POINT('',(143.87499858151,-152.5650014184,1.55)); +#367580 = DIRECTION('',(0.,0.,-1.)); +#367581 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#367582 = ORIENTED_EDGE('',*,*,#367583,.F.); +#367583 = EDGE_CURVE('',#367584,#367575,#367586,.T.); +#367584 = VERTEX_POINT('',#367585); +#367585 = CARTESIAN_POINT('',(144.01,-152.565,1.51)); +#367586 = LINE('',#367587,#367588); +#367587 = CARTESIAN_POINT('',(144.01,-152.565,1.51)); +#367588 = VECTOR('',#367589,1.); +#367589 = DIRECTION('',(0.,0.,1.)); +#367590 = ORIENTED_EDGE('',*,*,#367591,.F.); +#367591 = EDGE_CURVE('',#367552,#367584,#367592,.T.); +#367592 = CIRCLE('',#367593,0.135001418495); +#367593 = AXIS2_PLACEMENT_3D('',#367594,#367595,#367596); +#367594 = CARTESIAN_POINT('',(143.87499858151,-152.5650014184,1.51)); +#367595 = DIRECTION('',(0.,0.,-1.)); +#367596 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#367597 = CYLINDRICAL_SURFACE('',#367598,0.135001418495); +#367598 = AXIS2_PLACEMENT_3D('',#367599,#367600,#367601); +#367599 = CARTESIAN_POINT('',(143.87499858151,-152.5650014184,1.51)); +#367600 = DIRECTION('',(0.,0.,-1.)); +#367601 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#367602 = ADVANCED_FACE('',(#367603),#367628,.T.); +#367603 = FACE_BOUND('',#367604,.T.); +#367604 = EDGE_LOOP('',(#367605,#367606,#367614,#367622)); +#367605 = ORIENTED_EDGE('',*,*,#367583,.T.); +#367606 = ORIENTED_EDGE('',*,*,#367607,.T.); +#367607 = EDGE_CURVE('',#367575,#367608,#367610,.T.); +#367608 = VERTEX_POINT('',#367609); +#367609 = CARTESIAN_POINT('',(144.01,-152.935,1.55)); +#367610 = LINE('',#367611,#367612); +#367611 = CARTESIAN_POINT('',(144.01,-152.565,1.55)); +#367612 = VECTOR('',#367613,1.); +#367613 = DIRECTION('',(0.,-1.,0.)); +#367614 = ORIENTED_EDGE('',*,*,#367615,.F.); +#367615 = EDGE_CURVE('',#367616,#367608,#367618,.T.); +#367616 = VERTEX_POINT('',#367617); +#367617 = CARTESIAN_POINT('',(144.01,-152.935,1.51)); +#367618 = LINE('',#367619,#367620); +#367619 = CARTESIAN_POINT('',(144.01,-152.935,1.51)); +#367620 = VECTOR('',#367621,1.); +#367621 = DIRECTION('',(0.,0.,1.)); +#367622 = ORIENTED_EDGE('',*,*,#367623,.F.); +#367623 = EDGE_CURVE('',#367584,#367616,#367624,.T.); +#367624 = LINE('',#367625,#367626); +#367625 = CARTESIAN_POINT('',(144.01,-152.565,1.51)); +#367626 = VECTOR('',#367627,1.); +#367627 = DIRECTION('',(0.,-1.,0.)); +#367628 = PLANE('',#367629); +#367629 = AXIS2_PLACEMENT_3D('',#367630,#367631,#367632); +#367630 = CARTESIAN_POINT('',(144.01,-152.565,1.51)); +#367631 = DIRECTION('',(1.,0.,-0.)); +#367632 = DIRECTION('',(0.,-1.,0.)); +#367633 = ADVANCED_FACE('',(#367634),#367661,.T.); +#367634 = FACE_BOUND('',#367635,.T.); +#367635 = EDGE_LOOP('',(#367636,#367637,#367646,#367654)); +#367636 = ORIENTED_EDGE('',*,*,#367615,.T.); +#367637 = ORIENTED_EDGE('',*,*,#367638,.T.); +#367638 = EDGE_CURVE('',#367608,#367639,#367641,.T.); +#367639 = VERTEX_POINT('',#367640); +#367640 = CARTESIAN_POINT('',(143.875,-153.07,1.55)); +#367641 = CIRCLE('',#367642,0.135001418495); +#367642 = AXIS2_PLACEMENT_3D('',#367643,#367644,#367645); +#367643 = CARTESIAN_POINT('',(143.87499858151,-152.9349985815,1.55)); +#367644 = DIRECTION('',(0.,0.,-1.)); +#367645 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367646 = ORIENTED_EDGE('',*,*,#367647,.F.); +#367647 = EDGE_CURVE('',#367648,#367639,#367650,.T.); +#367648 = VERTEX_POINT('',#367649); +#367649 = CARTESIAN_POINT('',(143.875,-153.07,1.51)); +#367650 = LINE('',#367651,#367652); +#367651 = CARTESIAN_POINT('',(143.875,-153.07,1.51)); +#367652 = VECTOR('',#367653,1.); +#367653 = DIRECTION('',(0.,0.,1.)); +#367654 = ORIENTED_EDGE('',*,*,#367655,.F.); +#367655 = EDGE_CURVE('',#367616,#367648,#367656,.T.); +#367656 = CIRCLE('',#367657,0.135001418495); +#367657 = AXIS2_PLACEMENT_3D('',#367658,#367659,#367660); +#367658 = CARTESIAN_POINT('',(143.87499858151,-152.9349985815,1.51)); +#367659 = DIRECTION('',(0.,0.,-1.)); +#367660 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367661 = CYLINDRICAL_SURFACE('',#367662,0.135001418495); +#367662 = AXIS2_PLACEMENT_3D('',#367663,#367664,#367665); +#367663 = CARTESIAN_POINT('',(143.87499858151,-152.9349985815,1.51)); +#367664 = DIRECTION('',(0.,0.,-1.)); +#367665 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#367666 = ADVANCED_FACE('',(#367667),#367692,.T.); +#367667 = FACE_BOUND('',#367668,.T.); +#367668 = EDGE_LOOP('',(#367669,#367670,#367678,#367686)); +#367669 = ORIENTED_EDGE('',*,*,#367647,.T.); +#367670 = ORIENTED_EDGE('',*,*,#367671,.T.); +#367671 = EDGE_CURVE('',#367639,#367672,#367674,.T.); +#367672 = VERTEX_POINT('',#367673); +#367673 = CARTESIAN_POINT('',(143.605,-153.07,1.55)); +#367674 = LINE('',#367675,#367676); +#367675 = CARTESIAN_POINT('',(143.875,-153.07,1.55)); +#367676 = VECTOR('',#367677,1.); +#367677 = DIRECTION('',(-1.,0.,0.)); +#367678 = ORIENTED_EDGE('',*,*,#367679,.F.); +#367679 = EDGE_CURVE('',#367680,#367672,#367682,.T.); +#367680 = VERTEX_POINT('',#367681); +#367681 = CARTESIAN_POINT('',(143.605,-153.07,1.51)); +#367682 = LINE('',#367683,#367684); +#367683 = CARTESIAN_POINT('',(143.605,-153.07,1.51)); +#367684 = VECTOR('',#367685,1.); +#367685 = DIRECTION('',(0.,0.,1.)); +#367686 = ORIENTED_EDGE('',*,*,#367687,.F.); +#367687 = EDGE_CURVE('',#367648,#367680,#367688,.T.); +#367688 = LINE('',#367689,#367690); +#367689 = CARTESIAN_POINT('',(143.875,-153.07,1.51)); +#367690 = VECTOR('',#367691,1.); +#367691 = DIRECTION('',(-1.,0.,0.)); +#367692 = PLANE('',#367693); +#367693 = AXIS2_PLACEMENT_3D('',#367694,#367695,#367696); +#367694 = CARTESIAN_POINT('',(143.875,-153.07,1.51)); +#367695 = DIRECTION('',(0.,-1.,0.)); +#367696 = DIRECTION('',(-1.,0.,0.)); +#367697 = ADVANCED_FACE('',(#367698),#367725,.T.); +#367698 = FACE_BOUND('',#367699,.T.); +#367699 = EDGE_LOOP('',(#367700,#367701,#367710,#367718)); +#367700 = ORIENTED_EDGE('',*,*,#367679,.T.); +#367701 = ORIENTED_EDGE('',*,*,#367702,.T.); +#367702 = EDGE_CURVE('',#367672,#367703,#367705,.T.); +#367703 = VERTEX_POINT('',#367704); +#367704 = CARTESIAN_POINT('',(143.47,-152.935,1.55)); +#367705 = CIRCLE('',#367706,0.135001418495); +#367706 = AXIS2_PLACEMENT_3D('',#367707,#367708,#367709); +#367707 = CARTESIAN_POINT('',(143.60500141848,-152.9349985815,1.55)); +#367708 = DIRECTION('',(0.,0.,-1.)); +#367709 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#367710 = ORIENTED_EDGE('',*,*,#367711,.F.); +#367711 = EDGE_CURVE('',#367712,#367703,#367714,.T.); +#367712 = VERTEX_POINT('',#367713); +#367713 = CARTESIAN_POINT('',(143.47,-152.935,1.51)); +#367714 = LINE('',#367715,#367716); +#367715 = CARTESIAN_POINT('',(143.47,-152.935,1.51)); +#367716 = VECTOR('',#367717,1.); +#367717 = DIRECTION('',(0.,0.,1.)); +#367718 = ORIENTED_EDGE('',*,*,#367719,.F.); +#367719 = EDGE_CURVE('',#367680,#367712,#367720,.T.); +#367720 = CIRCLE('',#367721,0.135001418495); +#367721 = AXIS2_PLACEMENT_3D('',#367722,#367723,#367724); +#367722 = CARTESIAN_POINT('',(143.60500141848,-152.9349985815,1.51)); +#367723 = DIRECTION('',(0.,0.,-1.)); +#367724 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#367725 = CYLINDRICAL_SURFACE('',#367726,0.135001418495); +#367726 = AXIS2_PLACEMENT_3D('',#367727,#367728,#367729); +#367727 = CARTESIAN_POINT('',(143.60500141848,-152.9349985815,1.51)); +#367728 = DIRECTION('',(0.,0.,-1.)); +#367729 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#367730 = ADVANCED_FACE('',(#367731),#367747,.T.); +#367731 = FACE_BOUND('',#367732,.T.); +#367732 = EDGE_LOOP('',(#367733,#367734,#367740,#367741)); +#367733 = ORIENTED_EDGE('',*,*,#367711,.T.); +#367734 = ORIENTED_EDGE('',*,*,#367735,.T.); +#367735 = EDGE_CURVE('',#367703,#367503,#367736,.T.); +#367736 = LINE('',#367737,#367738); +#367737 = CARTESIAN_POINT('',(143.47,-152.935,1.55)); +#367738 = VECTOR('',#367739,1.); +#367739 = DIRECTION('',(0.,1.,0.)); +#367740 = ORIENTED_EDGE('',*,*,#367500,.F.); +#367741 = ORIENTED_EDGE('',*,*,#367742,.F.); +#367742 = EDGE_CURVE('',#367712,#367501,#367743,.T.); +#367743 = LINE('',#367744,#367745); +#367744 = CARTESIAN_POINT('',(143.47,-152.935,1.51)); +#367745 = VECTOR('',#367746,1.); +#367746 = DIRECTION('',(0.,1.,0.)); +#367747 = PLANE('',#367748); +#367748 = AXIS2_PLACEMENT_3D('',#367749,#367750,#367751); +#367749 = CARTESIAN_POINT('',(143.47,-152.935,1.51)); +#367750 = DIRECTION('',(-1.,0.,0.)); +#367751 = DIRECTION('',(0.,1.,0.)); +#367752 = ADVANCED_FACE('',(#367753),#367763,.F.); +#367753 = FACE_BOUND('',#367754,.T.); +#367754 = EDGE_LOOP('',(#367755,#367756,#367757,#367758,#367759,#367760, + #367761,#367762)); +#367755 = ORIENTED_EDGE('',*,*,#367527,.T.); +#367756 = ORIENTED_EDGE('',*,*,#367559,.T.); +#367757 = ORIENTED_EDGE('',*,*,#367591,.T.); +#367758 = ORIENTED_EDGE('',*,*,#367623,.T.); +#367759 = ORIENTED_EDGE('',*,*,#367655,.T.); +#367760 = ORIENTED_EDGE('',*,*,#367687,.T.); +#367761 = ORIENTED_EDGE('',*,*,#367719,.T.); +#367762 = ORIENTED_EDGE('',*,*,#367742,.T.); +#367763 = PLANE('',#367764); +#367764 = AXIS2_PLACEMENT_3D('',#367765,#367766,#367767); +#367765 = CARTESIAN_POINT('',(0.,0.,1.51)); +#367766 = DIRECTION('',(0.,0.,1.)); +#367767 = DIRECTION('',(1.,0.,-0.)); +#367768 = ADVANCED_FACE('',(#367769),#367779,.T.); +#367769 = FACE_BOUND('',#367770,.F.); +#367770 = EDGE_LOOP('',(#367771,#367772,#367773,#367774,#367775,#367776, + #367777,#367778)); +#367771 = ORIENTED_EDGE('',*,*,#367510,.T.); +#367772 = ORIENTED_EDGE('',*,*,#367543,.T.); +#367773 = ORIENTED_EDGE('',*,*,#367574,.T.); +#367774 = ORIENTED_EDGE('',*,*,#367607,.T.); +#367775 = ORIENTED_EDGE('',*,*,#367638,.T.); +#367776 = ORIENTED_EDGE('',*,*,#367671,.T.); +#367777 = ORIENTED_EDGE('',*,*,#367702,.T.); +#367778 = ORIENTED_EDGE('',*,*,#367735,.T.); +#367779 = PLANE('',#367780); +#367780 = AXIS2_PLACEMENT_3D('',#367781,#367782,#367783); +#367781 = CARTESIAN_POINT('',(0.,0.,1.55)); +#367782 = DIRECTION('',(0.,0.,1.)); +#367783 = DIRECTION('',(1.,0.,-0.)); +#367784 = MANIFOLD_SOLID_BREP('',#367785); +#367785 = CLOSED_SHELL('',(#367786,#367828,#367859,#367892,#367923, + #367956,#367987,#368020,#368042,#368058)); +#367786 = ADVANCED_FACE('',(#367787),#367823,.T.); +#367787 = FACE_BOUND('',#367788,.T.); +#367788 = EDGE_LOOP('',(#367789,#367799,#367808,#367816)); +#367789 = ORIENTED_EDGE('',*,*,#367790,.T.); +#367790 = EDGE_CURVE('',#367791,#367793,#367795,.T.); +#367791 = VERTEX_POINT('',#367792); +#367792 = CARTESIAN_POINT('',(139.1,-152.405,1.51)); +#367793 = VERTEX_POINT('',#367794); +#367794 = CARTESIAN_POINT('',(139.1,-152.405,1.55)); +#367795 = LINE('',#367796,#367797); +#367796 = CARTESIAN_POINT('',(139.1,-152.405,1.51)); +#367797 = VECTOR('',#367798,1.); +#367798 = DIRECTION('',(0.,0.,1.)); +#367799 = ORIENTED_EDGE('',*,*,#367800,.T.); +#367800 = EDGE_CURVE('',#367793,#367801,#367803,.T.); +#367801 = VERTEX_POINT('',#367802); +#367802 = CARTESIAN_POINT('',(139.175,-152.33,1.55)); +#367803 = CIRCLE('',#367804,7.500002932469E-02); +#367804 = AXIS2_PLACEMENT_3D('',#367805,#367806,#367807); +#367805 = CARTESIAN_POINT('',(139.17500002932,-152.4050000293,1.55)); +#367806 = DIRECTION('',(0.,0.,-1.)); +#367807 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#367808 = ORIENTED_EDGE('',*,*,#367809,.F.); +#367809 = EDGE_CURVE('',#367810,#367801,#367812,.T.); +#367810 = VERTEX_POINT('',#367811); +#367811 = CARTESIAN_POINT('',(139.175,-152.33,1.51)); +#367812 = LINE('',#367813,#367814); +#367813 = CARTESIAN_POINT('',(139.175,-152.33,1.51)); +#367814 = VECTOR('',#367815,1.); +#367815 = DIRECTION('',(0.,0.,1.)); +#367816 = ORIENTED_EDGE('',*,*,#367817,.F.); +#367817 = EDGE_CURVE('',#367791,#367810,#367818,.T.); +#367818 = CIRCLE('',#367819,7.500002932469E-02); +#367819 = AXIS2_PLACEMENT_3D('',#367820,#367821,#367822); +#367820 = CARTESIAN_POINT('',(139.17500002932,-152.4050000293,1.51)); +#367821 = DIRECTION('',(0.,0.,-1.)); +#367822 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#367823 = CYLINDRICAL_SURFACE('',#367824,7.500002932469E-02); +#367824 = AXIS2_PLACEMENT_3D('',#367825,#367826,#367827); +#367825 = CARTESIAN_POINT('',(139.17500002932,-152.4050000293,1.51)); +#367826 = DIRECTION('',(0.,0.,-1.)); +#367827 = DIRECTION('',(-1.,3.909957879318E-07,0.)); +#367828 = ADVANCED_FACE('',(#367829),#367854,.T.); +#367829 = FACE_BOUND('',#367830,.T.); +#367830 = EDGE_LOOP('',(#367831,#367832,#367840,#367848)); +#367831 = ORIENTED_EDGE('',*,*,#367809,.T.); +#367832 = ORIENTED_EDGE('',*,*,#367833,.T.); +#367833 = EDGE_CURVE('',#367801,#367834,#367836,.T.); +#367834 = VERTEX_POINT('',#367835); +#367835 = CARTESIAN_POINT('',(139.325,-152.33,1.55)); +#367836 = LINE('',#367837,#367838); +#367837 = CARTESIAN_POINT('',(139.175,-152.33,1.55)); +#367838 = VECTOR('',#367839,1.); +#367839 = DIRECTION('',(1.,0.,0.)); +#367840 = ORIENTED_EDGE('',*,*,#367841,.F.); +#367841 = EDGE_CURVE('',#367842,#367834,#367844,.T.); +#367842 = VERTEX_POINT('',#367843); +#367843 = CARTESIAN_POINT('',(139.325,-152.33,1.51)); +#367844 = LINE('',#367845,#367846); +#367845 = CARTESIAN_POINT('',(139.325,-152.33,1.51)); +#367846 = VECTOR('',#367847,1.); +#367847 = DIRECTION('',(0.,0.,1.)); +#367848 = ORIENTED_EDGE('',*,*,#367849,.F.); +#367849 = EDGE_CURVE('',#367810,#367842,#367850,.T.); +#367850 = LINE('',#367851,#367852); +#367851 = CARTESIAN_POINT('',(139.175,-152.33,1.51)); +#367852 = VECTOR('',#367853,1.); +#367853 = DIRECTION('',(1.,0.,0.)); +#367854 = PLANE('',#367855); +#367855 = AXIS2_PLACEMENT_3D('',#367856,#367857,#367858); +#367856 = CARTESIAN_POINT('',(139.175,-152.33,1.51)); +#367857 = DIRECTION('',(0.,1.,0.)); +#367858 = DIRECTION('',(1.,0.,0.)); +#367859 = ADVANCED_FACE('',(#367860),#367887,.T.); +#367860 = FACE_BOUND('',#367861,.T.); +#367861 = EDGE_LOOP('',(#367862,#367863,#367872,#367880)); +#367862 = ORIENTED_EDGE('',*,*,#367841,.T.); +#367863 = ORIENTED_EDGE('',*,*,#367864,.T.); +#367864 = EDGE_CURVE('',#367834,#367865,#367867,.T.); +#367865 = VERTEX_POINT('',#367866); +#367866 = CARTESIAN_POINT('',(139.4,-152.405,1.55)); +#367867 = CIRCLE('',#367868,7.500002932469E-02); +#367868 = AXIS2_PLACEMENT_3D('',#367869,#367870,#367871); +#367869 = CARTESIAN_POINT('',(139.32499997067,-152.4050000293,1.55)); +#367870 = DIRECTION('',(0.,0.,-1.)); +#367871 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367872 = ORIENTED_EDGE('',*,*,#367873,.F.); +#367873 = EDGE_CURVE('',#367874,#367865,#367876,.T.); +#367874 = VERTEX_POINT('',#367875); +#367875 = CARTESIAN_POINT('',(139.4,-152.405,1.51)); +#367876 = LINE('',#367877,#367878); +#367877 = CARTESIAN_POINT('',(139.4,-152.405,1.51)); +#367878 = VECTOR('',#367879,1.); +#367879 = DIRECTION('',(0.,0.,1.)); +#367880 = ORIENTED_EDGE('',*,*,#367881,.F.); +#367881 = EDGE_CURVE('',#367842,#367874,#367882,.T.); +#367882 = CIRCLE('',#367883,7.500002932469E-02); +#367883 = AXIS2_PLACEMENT_3D('',#367884,#367885,#367886); +#367884 = CARTESIAN_POINT('',(139.32499997067,-152.4050000293,1.51)); +#367885 = DIRECTION('',(0.,0.,-1.)); +#367886 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367887 = CYLINDRICAL_SURFACE('',#367888,7.500002932469E-02); +#367888 = AXIS2_PLACEMENT_3D('',#367889,#367890,#367891); +#367889 = CARTESIAN_POINT('',(139.32499997067,-152.4050000293,1.51)); +#367890 = DIRECTION('',(0.,0.,-1.)); +#367891 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#367892 = ADVANCED_FACE('',(#367893),#367918,.T.); +#367893 = FACE_BOUND('',#367894,.T.); +#367894 = EDGE_LOOP('',(#367895,#367896,#367904,#367912)); +#367895 = ORIENTED_EDGE('',*,*,#367873,.T.); +#367896 = ORIENTED_EDGE('',*,*,#367897,.T.); +#367897 = EDGE_CURVE('',#367865,#367898,#367900,.T.); +#367898 = VERTEX_POINT('',#367899); +#367899 = CARTESIAN_POINT('',(139.4,-153.705,1.55)); +#367900 = LINE('',#367901,#367902); +#367901 = CARTESIAN_POINT('',(139.4,-152.405,1.55)); +#367902 = VECTOR('',#367903,1.); +#367903 = DIRECTION('',(0.,-1.,0.)); +#367904 = ORIENTED_EDGE('',*,*,#367905,.F.); +#367905 = EDGE_CURVE('',#367906,#367898,#367908,.T.); +#367906 = VERTEX_POINT('',#367907); +#367907 = CARTESIAN_POINT('',(139.4,-153.705,1.51)); +#367908 = LINE('',#367909,#367910); +#367909 = CARTESIAN_POINT('',(139.4,-153.705,1.51)); +#367910 = VECTOR('',#367911,1.); +#367911 = DIRECTION('',(0.,0.,1.)); +#367912 = ORIENTED_EDGE('',*,*,#367913,.F.); +#367913 = EDGE_CURVE('',#367874,#367906,#367914,.T.); +#367914 = LINE('',#367915,#367916); +#367915 = CARTESIAN_POINT('',(139.4,-152.405,1.51)); +#367916 = VECTOR('',#367917,1.); +#367917 = DIRECTION('',(0.,-1.,0.)); +#367918 = PLANE('',#367919); +#367919 = AXIS2_PLACEMENT_3D('',#367920,#367921,#367922); +#367920 = CARTESIAN_POINT('',(139.4,-152.405,1.51)); +#367921 = DIRECTION('',(1.,0.,-0.)); +#367922 = DIRECTION('',(0.,-1.,0.)); +#367923 = ADVANCED_FACE('',(#367924),#367951,.T.); +#367924 = FACE_BOUND('',#367925,.T.); +#367925 = EDGE_LOOP('',(#367926,#367927,#367936,#367944)); +#367926 = ORIENTED_EDGE('',*,*,#367905,.T.); +#367927 = ORIENTED_EDGE('',*,*,#367928,.T.); +#367928 = EDGE_CURVE('',#367898,#367929,#367931,.T.); +#367929 = VERTEX_POINT('',#367930); +#367930 = CARTESIAN_POINT('',(139.325,-153.78,1.55)); +#367931 = CIRCLE('',#367932,7.500002932469E-02); +#367932 = AXIS2_PLACEMENT_3D('',#367933,#367934,#367935); +#367933 = CARTESIAN_POINT('',(139.32499997067,-153.7049999706,1.55)); +#367934 = DIRECTION('',(0.,0.,-1.)); +#367935 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367936 = ORIENTED_EDGE('',*,*,#367937,.F.); +#367937 = EDGE_CURVE('',#367938,#367929,#367940,.T.); +#367938 = VERTEX_POINT('',#367939); +#367939 = CARTESIAN_POINT('',(139.325,-153.78,1.51)); +#367940 = LINE('',#367941,#367942); +#367941 = CARTESIAN_POINT('',(139.325,-153.78,1.51)); +#367942 = VECTOR('',#367943,1.); +#367943 = DIRECTION('',(0.,0.,1.)); +#367944 = ORIENTED_EDGE('',*,*,#367945,.F.); +#367945 = EDGE_CURVE('',#367906,#367938,#367946,.T.); +#367946 = CIRCLE('',#367947,7.500002932469E-02); +#367947 = AXIS2_PLACEMENT_3D('',#367948,#367949,#367950); +#367948 = CARTESIAN_POINT('',(139.32499997067,-153.7049999706,1.51)); +#367949 = DIRECTION('',(0.,0.,-1.)); +#367950 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367951 = CYLINDRICAL_SURFACE('',#367952,7.500002932469E-02); +#367952 = AXIS2_PLACEMENT_3D('',#367953,#367954,#367955); +#367953 = CARTESIAN_POINT('',(139.32499997067,-153.7049999706,1.51)); +#367954 = DIRECTION('',(0.,0.,-1.)); +#367955 = DIRECTION('',(1.,-3.909957879318E-07,0.)); +#367956 = ADVANCED_FACE('',(#367957),#367982,.T.); +#367957 = FACE_BOUND('',#367958,.T.); +#367958 = EDGE_LOOP('',(#367959,#367960,#367968,#367976)); +#367959 = ORIENTED_EDGE('',*,*,#367937,.T.); +#367960 = ORIENTED_EDGE('',*,*,#367961,.T.); +#367961 = EDGE_CURVE('',#367929,#367962,#367964,.T.); +#367962 = VERTEX_POINT('',#367963); +#367963 = CARTESIAN_POINT('',(139.175,-153.78,1.55)); +#367964 = LINE('',#367965,#367966); +#367965 = CARTESIAN_POINT('',(139.325,-153.78,1.55)); +#367966 = VECTOR('',#367967,1.); +#367967 = DIRECTION('',(-1.,0.,0.)); +#367968 = ORIENTED_EDGE('',*,*,#367969,.F.); +#367969 = EDGE_CURVE('',#367970,#367962,#367972,.T.); +#367970 = VERTEX_POINT('',#367971); +#367971 = CARTESIAN_POINT('',(139.175,-153.78,1.51)); +#367972 = LINE('',#367973,#367974); +#367973 = CARTESIAN_POINT('',(139.175,-153.78,1.51)); +#367974 = VECTOR('',#367975,1.); +#367975 = DIRECTION('',(0.,0.,1.)); +#367976 = ORIENTED_EDGE('',*,*,#367977,.F.); +#367977 = EDGE_CURVE('',#367938,#367970,#367978,.T.); +#367978 = LINE('',#367979,#367980); +#367979 = CARTESIAN_POINT('',(139.325,-153.78,1.51)); +#367980 = VECTOR('',#367981,1.); +#367981 = DIRECTION('',(-1.,0.,0.)); +#367982 = PLANE('',#367983); +#367983 = AXIS2_PLACEMENT_3D('',#367984,#367985,#367986); +#367984 = CARTESIAN_POINT('',(139.325,-153.78,1.51)); +#367985 = DIRECTION('',(0.,-1.,0.)); +#367986 = DIRECTION('',(-1.,0.,0.)); +#367987 = ADVANCED_FACE('',(#367988),#368015,.T.); +#367988 = FACE_BOUND('',#367989,.T.); +#367989 = EDGE_LOOP('',(#367990,#367991,#368000,#368008)); +#367990 = ORIENTED_EDGE('',*,*,#367969,.T.); +#367991 = ORIENTED_EDGE('',*,*,#367992,.T.); +#367992 = EDGE_CURVE('',#367962,#367993,#367995,.T.); +#367993 = VERTEX_POINT('',#367994); +#367994 = CARTESIAN_POINT('',(139.1,-153.705,1.55)); +#367995 = CIRCLE('',#367996,7.500002932469E-02); +#367996 = AXIS2_PLACEMENT_3D('',#367997,#367998,#367999); +#367997 = CARTESIAN_POINT('',(139.17500002932,-153.7049999706,1.55)); +#367998 = DIRECTION('',(0.,0.,-1.)); +#367999 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#368000 = ORIENTED_EDGE('',*,*,#368001,.F.); +#368001 = EDGE_CURVE('',#368002,#367993,#368004,.T.); +#368002 = VERTEX_POINT('',#368003); +#368003 = CARTESIAN_POINT('',(139.1,-153.705,1.51)); +#368004 = LINE('',#368005,#368006); +#368005 = CARTESIAN_POINT('',(139.1,-153.705,1.51)); +#368006 = VECTOR('',#368007,1.); +#368007 = DIRECTION('',(0.,0.,1.)); +#368008 = ORIENTED_EDGE('',*,*,#368009,.F.); +#368009 = EDGE_CURVE('',#367970,#368002,#368010,.T.); +#368010 = CIRCLE('',#368011,7.500002932469E-02); +#368011 = AXIS2_PLACEMENT_3D('',#368012,#368013,#368014); +#368012 = CARTESIAN_POINT('',(139.17500002932,-153.7049999706,1.51)); +#368013 = DIRECTION('',(0.,0.,-1.)); +#368014 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#368015 = CYLINDRICAL_SURFACE('',#368016,7.500002932469E-02); +#368016 = AXIS2_PLACEMENT_3D('',#368017,#368018,#368019); +#368017 = CARTESIAN_POINT('',(139.17500002932,-153.7049999706,1.51)); +#368018 = DIRECTION('',(0.,0.,-1.)); +#368019 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#368020 = ADVANCED_FACE('',(#368021),#368037,.T.); +#368021 = FACE_BOUND('',#368022,.T.); +#368022 = EDGE_LOOP('',(#368023,#368024,#368030,#368031)); +#368023 = ORIENTED_EDGE('',*,*,#368001,.T.); +#368024 = ORIENTED_EDGE('',*,*,#368025,.T.); +#368025 = EDGE_CURVE('',#367993,#367793,#368026,.T.); +#368026 = LINE('',#368027,#368028); +#368027 = CARTESIAN_POINT('',(139.1,-153.705,1.55)); +#368028 = VECTOR('',#368029,1.); +#368029 = DIRECTION('',(0.,1.,0.)); +#368030 = ORIENTED_EDGE('',*,*,#367790,.F.); +#368031 = ORIENTED_EDGE('',*,*,#368032,.F.); +#368032 = EDGE_CURVE('',#368002,#367791,#368033,.T.); +#368033 = LINE('',#368034,#368035); +#368034 = CARTESIAN_POINT('',(139.1,-153.705,1.51)); +#368035 = VECTOR('',#368036,1.); +#368036 = DIRECTION('',(0.,1.,0.)); +#368037 = PLANE('',#368038); +#368038 = AXIS2_PLACEMENT_3D('',#368039,#368040,#368041); +#368039 = CARTESIAN_POINT('',(139.1,-153.705,1.51)); +#368040 = DIRECTION('',(-1.,0.,0.)); +#368041 = DIRECTION('',(0.,1.,0.)); +#368042 = ADVANCED_FACE('',(#368043),#368053,.F.); +#368043 = FACE_BOUND('',#368044,.T.); +#368044 = EDGE_LOOP('',(#368045,#368046,#368047,#368048,#368049,#368050, + #368051,#368052)); +#368045 = ORIENTED_EDGE('',*,*,#367817,.T.); +#368046 = ORIENTED_EDGE('',*,*,#367849,.T.); +#368047 = ORIENTED_EDGE('',*,*,#367881,.T.); +#368048 = ORIENTED_EDGE('',*,*,#367913,.T.); +#368049 = ORIENTED_EDGE('',*,*,#367945,.T.); +#368050 = ORIENTED_EDGE('',*,*,#367977,.T.); +#368051 = ORIENTED_EDGE('',*,*,#368009,.T.); +#368052 = ORIENTED_EDGE('',*,*,#368032,.T.); +#368053 = PLANE('',#368054); +#368054 = AXIS2_PLACEMENT_3D('',#368055,#368056,#368057); +#368055 = CARTESIAN_POINT('',(0.,0.,1.51)); +#368056 = DIRECTION('',(0.,0.,1.)); +#368057 = DIRECTION('',(1.,0.,-0.)); +#368058 = ADVANCED_FACE('',(#368059),#368069,.T.); +#368059 = FACE_BOUND('',#368060,.F.); +#368060 = EDGE_LOOP('',(#368061,#368062,#368063,#368064,#368065,#368066, + #368067,#368068)); +#368061 = ORIENTED_EDGE('',*,*,#367800,.T.); +#368062 = ORIENTED_EDGE('',*,*,#367833,.T.); +#368063 = ORIENTED_EDGE('',*,*,#367864,.T.); +#368064 = ORIENTED_EDGE('',*,*,#367897,.T.); +#368065 = ORIENTED_EDGE('',*,*,#367928,.T.); +#368066 = ORIENTED_EDGE('',*,*,#367961,.T.); +#368067 = ORIENTED_EDGE('',*,*,#367992,.T.); +#368068 = ORIENTED_EDGE('',*,*,#368025,.T.); +#368069 = PLANE('',#368070); +#368070 = AXIS2_PLACEMENT_3D('',#368071,#368072,#368073); +#368071 = CARTESIAN_POINT('',(0.,0.,1.55)); +#368072 = DIRECTION('',(0.,0.,1.)); +#368073 = DIRECTION('',(1.,0.,-0.)); +#368074 = MANIFOLD_SOLID_BREP('',#368075); +#368075 = CLOSED_SHELL('',(#368076,#368109,#368129,#368149)); +#368076 = ADVANCED_FACE('',(#368077),#368104,.T.); +#368077 = FACE_BOUND('',#368078,.F.); +#368078 = EDGE_LOOP('',(#368079,#368089,#368096,#368097)); +#368079 = ORIENTED_EDGE('',*,*,#368080,.T.); +#368080 = EDGE_CURVE('',#368081,#368083,#368085,.T.); +#368081 = VERTEX_POINT('',#368082); +#368082 = CARTESIAN_POINT('',(134.7155,-127.5,1.51)); +#368083 = VERTEX_POINT('',#368084); +#368084 = CARTESIAN_POINT('',(134.7155,-127.5,1.55)); +#368085 = LINE('',#368086,#368087); +#368086 = CARTESIAN_POINT('',(134.7155,-127.5,1.51)); +#368087 = VECTOR('',#368088,1.); +#368088 = DIRECTION('',(0.,0.,1.)); +#368089 = ORIENTED_EDGE('',*,*,#368090,.T.); +#368090 = EDGE_CURVE('',#368083,#368083,#368091,.T.); +#368091 = CIRCLE('',#368092,0.7155); +#368092 = AXIS2_PLACEMENT_3D('',#368093,#368094,#368095); +#368093 = CARTESIAN_POINT('',(134.,-127.5,1.55)); +#368094 = DIRECTION('',(0.,0.,1.)); +#368095 = DIRECTION('',(1.,0.,-0.)); +#368096 = ORIENTED_EDGE('',*,*,#368080,.F.); +#368097 = ORIENTED_EDGE('',*,*,#368098,.F.); +#368098 = EDGE_CURVE('',#368081,#368081,#368099,.T.); +#368099 = CIRCLE('',#368100,0.7155); +#368100 = AXIS2_PLACEMENT_3D('',#368101,#368102,#368103); +#368101 = CARTESIAN_POINT('',(134.,-127.5,1.51)); +#368102 = DIRECTION('',(0.,0.,1.)); +#368103 = DIRECTION('',(1.,0.,-0.)); +#368104 = CYLINDRICAL_SURFACE('',#368105,0.7155); +#368105 = AXIS2_PLACEMENT_3D('',#368106,#368107,#368108); +#368106 = CARTESIAN_POINT('',(134.,-127.5,1.51)); +#368107 = DIRECTION('',(-0.,-0.,-1.)); +#368108 = DIRECTION('',(1.,0.,-0.)); +#368109 = ADVANCED_FACE('',(#368110,#368113),#368124,.F.); +#368110 = FACE_BOUND('',#368111,.F.); +#368111 = EDGE_LOOP('',(#368112)); +#368112 = ORIENTED_EDGE('',*,*,#368098,.T.); +#368113 = FACE_BOUND('',#368114,.F.); +#368114 = EDGE_LOOP('',(#368115)); +#368115 = ORIENTED_EDGE('',*,*,#368116,.T.); +#368116 = EDGE_CURVE('',#368117,#368117,#368119,.T.); +#368117 = VERTEX_POINT('',#368118); +#368118 = CARTESIAN_POINT('',(134.,-127.935,1.51)); +#368119 = CIRCLE('',#368120,0.435); +#368120 = AXIS2_PLACEMENT_3D('',#368121,#368122,#368123); +#368121 = CARTESIAN_POINT('',(134.,-127.5,1.51)); +#368122 = DIRECTION('',(-0.,0.,-1.)); +#368123 = DIRECTION('',(-0.,-1.,0.)); +#368124 = PLANE('',#368125); +#368125 = AXIS2_PLACEMENT_3D('',#368126,#368127,#368128); +#368126 = CARTESIAN_POINT('',(0.,0.,1.51)); +#368127 = DIRECTION('',(0.,0.,1.)); +#368128 = DIRECTION('',(1.,0.,-0.)); +#368129 = ADVANCED_FACE('',(#368130,#368133),#368144,.T.); +#368130 = FACE_BOUND('',#368131,.T.); +#368131 = EDGE_LOOP('',(#368132)); +#368132 = ORIENTED_EDGE('',*,*,#368090,.T.); +#368133 = FACE_BOUND('',#368134,.T.); +#368134 = EDGE_LOOP('',(#368135)); +#368135 = ORIENTED_EDGE('',*,*,#368136,.T.); +#368136 = EDGE_CURVE('',#368137,#368137,#368139,.T.); +#368137 = VERTEX_POINT('',#368138); +#368138 = CARTESIAN_POINT('',(134.,-127.935,1.55)); +#368139 = CIRCLE('',#368140,0.435); +#368140 = AXIS2_PLACEMENT_3D('',#368141,#368142,#368143); +#368141 = CARTESIAN_POINT('',(134.,-127.5,1.55)); +#368142 = DIRECTION('',(-0.,0.,-1.)); +#368143 = DIRECTION('',(-0.,-1.,0.)); +#368144 = PLANE('',#368145); +#368145 = AXIS2_PLACEMENT_3D('',#368146,#368147,#368148); +#368146 = CARTESIAN_POINT('',(0.,0.,1.55)); +#368147 = DIRECTION('',(0.,0.,1.)); +#368148 = DIRECTION('',(1.,0.,-0.)); +#368149 = ADVANCED_FACE('',(#368150),#368161,.F.); +#368150 = FACE_BOUND('',#368151,.T.); +#368151 = EDGE_LOOP('',(#368152,#368153,#368159,#368160)); +#368152 = ORIENTED_EDGE('',*,*,#368116,.T.); +#368153 = ORIENTED_EDGE('',*,*,#368154,.T.); +#368154 = EDGE_CURVE('',#368117,#368137,#368155,.T.); +#368155 = LINE('',#368156,#368157); +#368156 = CARTESIAN_POINT('',(134.,-127.935,-4.6E-02)); +#368157 = VECTOR('',#368158,1.); +#368158 = DIRECTION('',(0.,0.,1.)); +#368159 = ORIENTED_EDGE('',*,*,#368136,.F.); +#368160 = ORIENTED_EDGE('',*,*,#368154,.F.); +#368161 = CYLINDRICAL_SURFACE('',#368162,0.435); +#368162 = AXIS2_PLACEMENT_3D('',#368163,#368164,#368165); +#368163 = CARTESIAN_POINT('',(134.,-127.5,-4.6E-02)); +#368164 = DIRECTION('',(-0.,-0.,-1.)); +#368165 = DIRECTION('',(-0.,-1.,0.)); +#368166 = MANIFOLD_SOLID_BREP('',#368167); +#368167 = CLOSED_SHELL('',(#368168,#368201,#368221,#368241)); +#368168 = ADVANCED_FACE('',(#368169),#368196,.T.); +#368169 = FACE_BOUND('',#368170,.T.); +#368170 = EDGE_LOOP('',(#368171,#368181,#368188,#368189)); +#368171 = ORIENTED_EDGE('',*,*,#368172,.T.); +#368172 = EDGE_CURVE('',#368173,#368175,#368177,.T.); +#368173 = VERTEX_POINT('',#368174); +#368174 = CARTESIAN_POINT('',(134.7155,-127.5,0.)); +#368175 = VERTEX_POINT('',#368176); +#368176 = CARTESIAN_POINT('',(134.7155,-127.5,-4.E-02)); +#368177 = LINE('',#368178,#368179); +#368178 = CARTESIAN_POINT('',(134.7155,-127.5,0.)); +#368179 = VECTOR('',#368180,1.); +#368180 = DIRECTION('',(0.,0.,-1.)); +#368181 = ORIENTED_EDGE('',*,*,#368182,.T.); +#368182 = EDGE_CURVE('',#368175,#368175,#368183,.T.); +#368183 = CIRCLE('',#368184,0.7155); +#368184 = AXIS2_PLACEMENT_3D('',#368185,#368186,#368187); +#368185 = CARTESIAN_POINT('',(134.,-127.5,-4.E-02)); +#368186 = DIRECTION('',(0.,0.,1.)); +#368187 = DIRECTION('',(1.,0.,-0.)); +#368188 = ORIENTED_EDGE('',*,*,#368172,.F.); +#368189 = ORIENTED_EDGE('',*,*,#368190,.F.); +#368190 = EDGE_CURVE('',#368173,#368173,#368191,.T.); +#368191 = CIRCLE('',#368192,0.7155); +#368192 = AXIS2_PLACEMENT_3D('',#368193,#368194,#368195); +#368193 = CARTESIAN_POINT('',(134.,-127.5,0.)); +#368194 = DIRECTION('',(0.,0.,1.)); +#368195 = DIRECTION('',(1.,0.,-0.)); +#368196 = CYLINDRICAL_SURFACE('',#368197,0.7155); +#368197 = AXIS2_PLACEMENT_3D('',#368198,#368199,#368200); +#368198 = CARTESIAN_POINT('',(134.,-127.5,0.)); +#368199 = DIRECTION('',(0.,0.,1.)); +#368200 = DIRECTION('',(1.,0.,-0.)); +#368201 = ADVANCED_FACE('',(#368202,#368205),#368216,.F.); +#368202 = FACE_BOUND('',#368203,.F.); +#368203 = EDGE_LOOP('',(#368204)); +#368204 = ORIENTED_EDGE('',*,*,#368190,.F.); +#368205 = FACE_BOUND('',#368206,.F.); +#368206 = EDGE_LOOP('',(#368207)); +#368207 = ORIENTED_EDGE('',*,*,#368208,.F.); +#368208 = EDGE_CURVE('',#368209,#368209,#368211,.T.); +#368209 = VERTEX_POINT('',#368210); +#368210 = CARTESIAN_POINT('',(134.,-127.935,0.)); +#368211 = CIRCLE('',#368212,0.435); +#368212 = AXIS2_PLACEMENT_3D('',#368213,#368214,#368215); +#368213 = CARTESIAN_POINT('',(134.,-127.5,0.)); +#368214 = DIRECTION('',(-0.,0.,-1.)); +#368215 = DIRECTION('',(-0.,-1.,0.)); +#368216 = PLANE('',#368217); +#368217 = AXIS2_PLACEMENT_3D('',#368218,#368219,#368220); +#368218 = CARTESIAN_POINT('',(0.,0.,0.)); +#368219 = DIRECTION('',(-0.,-0.,-1.)); +#368220 = DIRECTION('',(-1.,0.,0.)); +#368221 = ADVANCED_FACE('',(#368222,#368225),#368236,.T.); +#368222 = FACE_BOUND('',#368223,.T.); +#368223 = EDGE_LOOP('',(#368224)); +#368224 = ORIENTED_EDGE('',*,*,#368182,.F.); +#368225 = FACE_BOUND('',#368226,.T.); +#368226 = EDGE_LOOP('',(#368227)); +#368227 = ORIENTED_EDGE('',*,*,#368228,.F.); +#368228 = EDGE_CURVE('',#368229,#368229,#368231,.T.); +#368229 = VERTEX_POINT('',#368230); +#368230 = CARTESIAN_POINT('',(134.,-127.935,-4.E-02)); +#368231 = CIRCLE('',#368232,0.435); +#368232 = AXIS2_PLACEMENT_3D('',#368233,#368234,#368235); +#368233 = CARTESIAN_POINT('',(134.,-127.5,-4.E-02)); +#368234 = DIRECTION('',(-0.,0.,-1.)); +#368235 = DIRECTION('',(-0.,-1.,0.)); +#368236 = PLANE('',#368237); +#368237 = AXIS2_PLACEMENT_3D('',#368238,#368239,#368240); +#368238 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#368239 = DIRECTION('',(-0.,-0.,-1.)); +#368240 = DIRECTION('',(-1.,0.,0.)); +#368241 = ADVANCED_FACE('',(#368242),#368253,.F.); +#368242 = FACE_BOUND('',#368243,.T.); +#368243 = EDGE_LOOP('',(#368244,#368245,#368251,#368252)); +#368244 = ORIENTED_EDGE('',*,*,#368228,.T.); +#368245 = ORIENTED_EDGE('',*,*,#368246,.T.); +#368246 = EDGE_CURVE('',#368229,#368209,#368247,.T.); +#368247 = LINE('',#368248,#368249); +#368248 = CARTESIAN_POINT('',(134.,-127.935,-4.6E-02)); +#368249 = VECTOR('',#368250,1.); +#368250 = DIRECTION('',(0.,0.,1.)); +#368251 = ORIENTED_EDGE('',*,*,#368208,.F.); +#368252 = ORIENTED_EDGE('',*,*,#368246,.F.); +#368253 = CYLINDRICAL_SURFACE('',#368254,0.435); +#368254 = AXIS2_PLACEMENT_3D('',#368255,#368256,#368257); +#368255 = CARTESIAN_POINT('',(134.,-127.5,-4.6E-02)); +#368256 = DIRECTION('',(-0.,-0.,-1.)); +#368257 = DIRECTION('',(-0.,-1.,0.)); +#368258 = MANIFOLD_SOLID_BREP('',#368259); +#368259 = CLOSED_SHELL('',(#368260,#368293,#368313,#368333)); +#368260 = ADVANCED_FACE('',(#368261),#368288,.T.); +#368261 = FACE_BOUND('',#368262,.F.); +#368262 = EDGE_LOOP('',(#368263,#368273,#368280,#368281)); +#368263 = ORIENTED_EDGE('',*,*,#368264,.T.); +#368264 = EDGE_CURVE('',#368265,#368267,#368269,.T.); +#368265 = VERTEX_POINT('',#368266); +#368266 = CARTESIAN_POINT('',(134.,-127.96,-4.E-02)); +#368267 = VERTEX_POINT('',#368268); +#368268 = CARTESIAN_POINT('',(134.,-127.96,1.55)); +#368269 = LINE('',#368270,#368271); +#368270 = CARTESIAN_POINT('',(134.,-127.96,-4.E-02)); +#368271 = VECTOR('',#368272,1.); +#368272 = DIRECTION('',(0.,0.,1.)); +#368273 = ORIENTED_EDGE('',*,*,#368274,.T.); +#368274 = EDGE_CURVE('',#368267,#368267,#368275,.T.); +#368275 = CIRCLE('',#368276,0.46); +#368276 = AXIS2_PLACEMENT_3D('',#368277,#368278,#368279); +#368277 = CARTESIAN_POINT('',(134.,-127.5,1.55)); +#368278 = DIRECTION('',(0.,0.,1.)); +#368279 = DIRECTION('',(-0.,-1.,0.)); +#368280 = ORIENTED_EDGE('',*,*,#368264,.F.); +#368281 = ORIENTED_EDGE('',*,*,#368282,.F.); +#368282 = EDGE_CURVE('',#368265,#368265,#368283,.T.); +#368283 = CIRCLE('',#368284,0.46); +#368284 = AXIS2_PLACEMENT_3D('',#368285,#368286,#368287); +#368285 = CARTESIAN_POINT('',(134.,-127.5,-4.E-02)); +#368286 = DIRECTION('',(0.,0.,1.)); +#368287 = DIRECTION('',(-0.,-1.,0.)); +#368288 = CYLINDRICAL_SURFACE('',#368289,0.46); +#368289 = AXIS2_PLACEMENT_3D('',#368290,#368291,#368292); +#368290 = CARTESIAN_POINT('',(134.,-127.5,-4.E-02)); +#368291 = DIRECTION('',(-0.,-0.,-1.)); +#368292 = DIRECTION('',(-0.,-1.,0.)); +#368293 = ADVANCED_FACE('',(#368294,#368297),#368308,.F.); +#368294 = FACE_BOUND('',#368295,.F.); +#368295 = EDGE_LOOP('',(#368296)); +#368296 = ORIENTED_EDGE('',*,*,#368282,.T.); +#368297 = FACE_BOUND('',#368298,.F.); +#368298 = EDGE_LOOP('',(#368299)); +#368299 = ORIENTED_EDGE('',*,*,#368300,.T.); +#368300 = EDGE_CURVE('',#368301,#368301,#368303,.T.); +#368301 = VERTEX_POINT('',#368302); +#368302 = CARTESIAN_POINT('',(134.,-127.935,-4.E-02)); +#368303 = CIRCLE('',#368304,0.435); +#368304 = AXIS2_PLACEMENT_3D('',#368305,#368306,#368307); +#368305 = CARTESIAN_POINT('',(134.,-127.5,-4.E-02)); +#368306 = DIRECTION('',(-0.,0.,-1.)); +#368307 = DIRECTION('',(-0.,-1.,0.)); +#368308 = PLANE('',#368309); +#368309 = AXIS2_PLACEMENT_3D('',#368310,#368311,#368312); +#368310 = CARTESIAN_POINT('',(134.,-127.96,-4.E-02)); +#368311 = DIRECTION('',(0.,0.,1.)); +#368312 = DIRECTION('',(1.,0.,-0.)); +#368313 = ADVANCED_FACE('',(#368314,#368317),#368328,.T.); +#368314 = FACE_BOUND('',#368315,.T.); +#368315 = EDGE_LOOP('',(#368316)); +#368316 = ORIENTED_EDGE('',*,*,#368274,.T.); +#368317 = FACE_BOUND('',#368318,.T.); +#368318 = EDGE_LOOP('',(#368319)); +#368319 = ORIENTED_EDGE('',*,*,#368320,.T.); +#368320 = EDGE_CURVE('',#368321,#368321,#368323,.T.); +#368321 = VERTEX_POINT('',#368322); +#368322 = CARTESIAN_POINT('',(134.,-127.935,1.55)); +#368323 = CIRCLE('',#368324,0.435); +#368324 = AXIS2_PLACEMENT_3D('',#368325,#368326,#368327); +#368325 = CARTESIAN_POINT('',(134.,-127.5,1.55)); +#368326 = DIRECTION('',(-0.,0.,-1.)); +#368327 = DIRECTION('',(-0.,-1.,0.)); +#368328 = PLANE('',#368329); +#368329 = AXIS2_PLACEMENT_3D('',#368330,#368331,#368332); +#368330 = CARTESIAN_POINT('',(134.,-127.96,1.55)); +#368331 = DIRECTION('',(0.,0.,1.)); +#368332 = DIRECTION('',(1.,0.,-0.)); +#368333 = ADVANCED_FACE('',(#368334),#368345,.F.); +#368334 = FACE_BOUND('',#368335,.T.); +#368335 = EDGE_LOOP('',(#368336,#368337,#368343,#368344)); +#368336 = ORIENTED_EDGE('',*,*,#368300,.T.); +#368337 = ORIENTED_EDGE('',*,*,#368338,.T.); +#368338 = EDGE_CURVE('',#368301,#368321,#368339,.T.); +#368339 = LINE('',#368340,#368341); +#368340 = CARTESIAN_POINT('',(134.,-127.935,-4.6E-02)); +#368341 = VECTOR('',#368342,1.); +#368342 = DIRECTION('',(0.,0.,1.)); +#368343 = ORIENTED_EDGE('',*,*,#368320,.F.); +#368344 = ORIENTED_EDGE('',*,*,#368338,.F.); +#368345 = CYLINDRICAL_SURFACE('',#368346,0.435); +#368346 = AXIS2_PLACEMENT_3D('',#368347,#368348,#368349); +#368347 = CARTESIAN_POINT('',(134.,-127.5,-4.6E-02)); +#368348 = DIRECTION('',(-0.,-0.,-1.)); +#368349 = DIRECTION('',(-0.,-1.,0.)); +#368350 = MANIFOLD_SOLID_BREP('',#368351); +#368351 = CLOSED_SHELL('',(#368352,#368394,#368425,#368458,#368489, + #368522,#368553,#368586,#368608,#368624)); +#368352 = ADVANCED_FACE('',(#368353),#368389,.T.); +#368353 = FACE_BOUND('',#368354,.T.); +#368354 = EDGE_LOOP('',(#368355,#368365,#368374,#368382)); +#368355 = ORIENTED_EDGE('',*,*,#368356,.T.); +#368356 = EDGE_CURVE('',#368357,#368359,#368361,.T.); +#368357 = VERTEX_POINT('',#368358); +#368358 = CARTESIAN_POINT('',(133.97,-129.815,1.51)); +#368359 = VERTEX_POINT('',#368360); +#368360 = CARTESIAN_POINT('',(133.97,-129.815,1.55)); +#368361 = LINE('',#368362,#368363); +#368362 = CARTESIAN_POINT('',(133.97,-129.815,1.51)); +#368363 = VECTOR('',#368364,1.); +#368364 = DIRECTION('',(0.,0.,1.)); +#368365 = ORIENTED_EDGE('',*,*,#368366,.T.); +#368366 = EDGE_CURVE('',#368359,#368367,#368369,.T.); +#368367 = VERTEX_POINT('',#368368); +#368368 = CARTESIAN_POINT('',(134.105,-129.68,1.55)); +#368369 = CIRCLE('',#368370,0.135001418495); +#368370 = AXIS2_PLACEMENT_3D('',#368371,#368372,#368373); +#368371 = CARTESIAN_POINT('',(134.10500141848,-129.8150014184,1.55)); +#368372 = DIRECTION('',(0.,0.,-1.)); +#368373 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368374 = ORIENTED_EDGE('',*,*,#368375,.F.); +#368375 = EDGE_CURVE('',#368376,#368367,#368378,.T.); +#368376 = VERTEX_POINT('',#368377); +#368377 = CARTESIAN_POINT('',(134.105,-129.68,1.51)); +#368378 = LINE('',#368379,#368380); +#368379 = CARTESIAN_POINT('',(134.105,-129.68,1.51)); +#368380 = VECTOR('',#368381,1.); +#368381 = DIRECTION('',(0.,0.,1.)); +#368382 = ORIENTED_EDGE('',*,*,#368383,.F.); +#368383 = EDGE_CURVE('',#368357,#368376,#368384,.T.); +#368384 = CIRCLE('',#368385,0.135001418495); +#368385 = AXIS2_PLACEMENT_3D('',#368386,#368387,#368388); +#368386 = CARTESIAN_POINT('',(134.10500141848,-129.8150014184,1.51)); +#368387 = DIRECTION('',(0.,0.,-1.)); +#368388 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368389 = CYLINDRICAL_SURFACE('',#368390,0.135001418495); +#368390 = AXIS2_PLACEMENT_3D('',#368391,#368392,#368393); +#368391 = CARTESIAN_POINT('',(134.10500141848,-129.8150014184,1.51)); +#368392 = DIRECTION('',(0.,0.,-1.)); +#368393 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368394 = ADVANCED_FACE('',(#368395),#368420,.T.); +#368395 = FACE_BOUND('',#368396,.T.); +#368396 = EDGE_LOOP('',(#368397,#368398,#368406,#368414)); +#368397 = ORIENTED_EDGE('',*,*,#368375,.T.); +#368398 = ORIENTED_EDGE('',*,*,#368399,.T.); +#368399 = EDGE_CURVE('',#368367,#368400,#368402,.T.); +#368400 = VERTEX_POINT('',#368401); +#368401 = CARTESIAN_POINT('',(134.375,-129.68,1.55)); +#368402 = LINE('',#368403,#368404); +#368403 = CARTESIAN_POINT('',(134.105,-129.68,1.55)); +#368404 = VECTOR('',#368405,1.); +#368405 = DIRECTION('',(1.,0.,0.)); +#368406 = ORIENTED_EDGE('',*,*,#368407,.F.); +#368407 = EDGE_CURVE('',#368408,#368400,#368410,.T.); +#368408 = VERTEX_POINT('',#368409); +#368409 = CARTESIAN_POINT('',(134.375,-129.68,1.51)); +#368410 = LINE('',#368411,#368412); +#368411 = CARTESIAN_POINT('',(134.375,-129.68,1.51)); +#368412 = VECTOR('',#368413,1.); +#368413 = DIRECTION('',(0.,0.,1.)); +#368414 = ORIENTED_EDGE('',*,*,#368415,.F.); +#368415 = EDGE_CURVE('',#368376,#368408,#368416,.T.); +#368416 = LINE('',#368417,#368418); +#368417 = CARTESIAN_POINT('',(134.105,-129.68,1.51)); +#368418 = VECTOR('',#368419,1.); +#368419 = DIRECTION('',(1.,0.,0.)); +#368420 = PLANE('',#368421); +#368421 = AXIS2_PLACEMENT_3D('',#368422,#368423,#368424); +#368422 = CARTESIAN_POINT('',(134.105,-129.68,1.51)); +#368423 = DIRECTION('',(0.,1.,0.)); +#368424 = DIRECTION('',(1.,0.,0.)); +#368425 = ADVANCED_FACE('',(#368426),#368453,.T.); +#368426 = FACE_BOUND('',#368427,.T.); +#368427 = EDGE_LOOP('',(#368428,#368429,#368438,#368446)); +#368428 = ORIENTED_EDGE('',*,*,#368407,.T.); +#368429 = ORIENTED_EDGE('',*,*,#368430,.T.); +#368430 = EDGE_CURVE('',#368400,#368431,#368433,.T.); +#368431 = VERTEX_POINT('',#368432); +#368432 = CARTESIAN_POINT('',(134.51,-129.815,1.55)); +#368433 = CIRCLE('',#368434,0.135001418495); +#368434 = AXIS2_PLACEMENT_3D('',#368435,#368436,#368437); +#368435 = CARTESIAN_POINT('',(134.37499858151,-129.8150014184,1.55)); +#368436 = DIRECTION('',(0.,0.,-1.)); +#368437 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368438 = ORIENTED_EDGE('',*,*,#368439,.F.); +#368439 = EDGE_CURVE('',#368440,#368431,#368442,.T.); +#368440 = VERTEX_POINT('',#368441); +#368441 = CARTESIAN_POINT('',(134.51,-129.815,1.51)); +#368442 = LINE('',#368443,#368444); +#368443 = CARTESIAN_POINT('',(134.51,-129.815,1.51)); +#368444 = VECTOR('',#368445,1.); +#368445 = DIRECTION('',(0.,0.,1.)); +#368446 = ORIENTED_EDGE('',*,*,#368447,.F.); +#368447 = EDGE_CURVE('',#368408,#368440,#368448,.T.); +#368448 = CIRCLE('',#368449,0.135001418495); +#368449 = AXIS2_PLACEMENT_3D('',#368450,#368451,#368452); +#368450 = CARTESIAN_POINT('',(134.37499858151,-129.8150014184,1.51)); +#368451 = DIRECTION('',(0.,0.,-1.)); +#368452 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368453 = CYLINDRICAL_SURFACE('',#368454,0.135001418495); +#368454 = AXIS2_PLACEMENT_3D('',#368455,#368456,#368457); +#368455 = CARTESIAN_POINT('',(134.37499858151,-129.8150014184,1.51)); +#368456 = DIRECTION('',(0.,0.,-1.)); +#368457 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368458 = ADVANCED_FACE('',(#368459),#368484,.T.); +#368459 = FACE_BOUND('',#368460,.T.); +#368460 = EDGE_LOOP('',(#368461,#368462,#368470,#368478)); +#368461 = ORIENTED_EDGE('',*,*,#368439,.T.); +#368462 = ORIENTED_EDGE('',*,*,#368463,.T.); +#368463 = EDGE_CURVE('',#368431,#368464,#368466,.T.); +#368464 = VERTEX_POINT('',#368465); +#368465 = CARTESIAN_POINT('',(134.51,-130.185,1.55)); +#368466 = LINE('',#368467,#368468); +#368467 = CARTESIAN_POINT('',(134.51,-129.815,1.55)); +#368468 = VECTOR('',#368469,1.); +#368469 = DIRECTION('',(0.,-1.,0.)); +#368470 = ORIENTED_EDGE('',*,*,#368471,.F.); +#368471 = EDGE_CURVE('',#368472,#368464,#368474,.T.); +#368472 = VERTEX_POINT('',#368473); +#368473 = CARTESIAN_POINT('',(134.51,-130.185,1.51)); +#368474 = LINE('',#368475,#368476); +#368475 = CARTESIAN_POINT('',(134.51,-130.185,1.51)); +#368476 = VECTOR('',#368477,1.); +#368477 = DIRECTION('',(0.,0.,1.)); +#368478 = ORIENTED_EDGE('',*,*,#368479,.F.); +#368479 = EDGE_CURVE('',#368440,#368472,#368480,.T.); +#368480 = LINE('',#368481,#368482); +#368481 = CARTESIAN_POINT('',(134.51,-129.815,1.51)); +#368482 = VECTOR('',#368483,1.); +#368483 = DIRECTION('',(0.,-1.,0.)); +#368484 = PLANE('',#368485); +#368485 = AXIS2_PLACEMENT_3D('',#368486,#368487,#368488); +#368486 = CARTESIAN_POINT('',(134.51,-129.815,1.51)); +#368487 = DIRECTION('',(1.,0.,-0.)); +#368488 = DIRECTION('',(0.,-1.,0.)); +#368489 = ADVANCED_FACE('',(#368490),#368517,.T.); +#368490 = FACE_BOUND('',#368491,.T.); +#368491 = EDGE_LOOP('',(#368492,#368493,#368502,#368510)); +#368492 = ORIENTED_EDGE('',*,*,#368471,.T.); +#368493 = ORIENTED_EDGE('',*,*,#368494,.T.); +#368494 = EDGE_CURVE('',#368464,#368495,#368497,.T.); +#368495 = VERTEX_POINT('',#368496); +#368496 = CARTESIAN_POINT('',(134.375,-130.32,1.55)); +#368497 = CIRCLE('',#368498,0.135001418495); +#368498 = AXIS2_PLACEMENT_3D('',#368499,#368500,#368501); +#368499 = CARTESIAN_POINT('',(134.37499858151,-130.1849985815,1.55)); +#368500 = DIRECTION('',(0.,0.,-1.)); +#368501 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368502 = ORIENTED_EDGE('',*,*,#368503,.F.); +#368503 = EDGE_CURVE('',#368504,#368495,#368506,.T.); +#368504 = VERTEX_POINT('',#368505); +#368505 = CARTESIAN_POINT('',(134.375,-130.32,1.51)); +#368506 = LINE('',#368507,#368508); +#368507 = CARTESIAN_POINT('',(134.375,-130.32,1.51)); +#368508 = VECTOR('',#368509,1.); +#368509 = DIRECTION('',(0.,0.,1.)); +#368510 = ORIENTED_EDGE('',*,*,#368511,.F.); +#368511 = EDGE_CURVE('',#368472,#368504,#368512,.T.); +#368512 = CIRCLE('',#368513,0.135001418495); +#368513 = AXIS2_PLACEMENT_3D('',#368514,#368515,#368516); +#368514 = CARTESIAN_POINT('',(134.37499858151,-130.1849985815,1.51)); +#368515 = DIRECTION('',(0.,0.,-1.)); +#368516 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368517 = CYLINDRICAL_SURFACE('',#368518,0.135001418495); +#368518 = AXIS2_PLACEMENT_3D('',#368519,#368520,#368521); +#368519 = CARTESIAN_POINT('',(134.37499858151,-130.1849985815,1.51)); +#368520 = DIRECTION('',(0.,0.,-1.)); +#368521 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368522 = ADVANCED_FACE('',(#368523),#368548,.T.); +#368523 = FACE_BOUND('',#368524,.T.); +#368524 = EDGE_LOOP('',(#368525,#368526,#368534,#368542)); +#368525 = ORIENTED_EDGE('',*,*,#368503,.T.); +#368526 = ORIENTED_EDGE('',*,*,#368527,.T.); +#368527 = EDGE_CURVE('',#368495,#368528,#368530,.T.); +#368528 = VERTEX_POINT('',#368529); +#368529 = CARTESIAN_POINT('',(134.105,-130.32,1.55)); +#368530 = LINE('',#368531,#368532); +#368531 = CARTESIAN_POINT('',(134.375,-130.32,1.55)); +#368532 = VECTOR('',#368533,1.); +#368533 = DIRECTION('',(-1.,0.,0.)); +#368534 = ORIENTED_EDGE('',*,*,#368535,.F.); +#368535 = EDGE_CURVE('',#368536,#368528,#368538,.T.); +#368536 = VERTEX_POINT('',#368537); +#368537 = CARTESIAN_POINT('',(134.105,-130.32,1.51)); +#368538 = LINE('',#368539,#368540); +#368539 = CARTESIAN_POINT('',(134.105,-130.32,1.51)); +#368540 = VECTOR('',#368541,1.); +#368541 = DIRECTION('',(0.,0.,1.)); +#368542 = ORIENTED_EDGE('',*,*,#368543,.F.); +#368543 = EDGE_CURVE('',#368504,#368536,#368544,.T.); +#368544 = LINE('',#368545,#368546); +#368545 = CARTESIAN_POINT('',(134.375,-130.32,1.51)); +#368546 = VECTOR('',#368547,1.); +#368547 = DIRECTION('',(-1.,0.,0.)); +#368548 = PLANE('',#368549); +#368549 = AXIS2_PLACEMENT_3D('',#368550,#368551,#368552); +#368550 = CARTESIAN_POINT('',(134.375,-130.32,1.51)); +#368551 = DIRECTION('',(0.,-1.,0.)); +#368552 = DIRECTION('',(-1.,0.,0.)); +#368553 = ADVANCED_FACE('',(#368554),#368581,.T.); +#368554 = FACE_BOUND('',#368555,.T.); +#368555 = EDGE_LOOP('',(#368556,#368557,#368566,#368574)); +#368556 = ORIENTED_EDGE('',*,*,#368535,.T.); +#368557 = ORIENTED_EDGE('',*,*,#368558,.T.); +#368558 = EDGE_CURVE('',#368528,#368559,#368561,.T.); +#368559 = VERTEX_POINT('',#368560); +#368560 = CARTESIAN_POINT('',(133.97,-130.185,1.55)); +#368561 = CIRCLE('',#368562,0.135001418495); +#368562 = AXIS2_PLACEMENT_3D('',#368563,#368564,#368565); +#368563 = CARTESIAN_POINT('',(134.10500141848,-130.1849985815,1.55)); +#368564 = DIRECTION('',(0.,0.,-1.)); +#368565 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368566 = ORIENTED_EDGE('',*,*,#368567,.F.); +#368567 = EDGE_CURVE('',#368568,#368559,#368570,.T.); +#368568 = VERTEX_POINT('',#368569); +#368569 = CARTESIAN_POINT('',(133.97,-130.185,1.51)); +#368570 = LINE('',#368571,#368572); +#368571 = CARTESIAN_POINT('',(133.97,-130.185,1.51)); +#368572 = VECTOR('',#368573,1.); +#368573 = DIRECTION('',(0.,0.,1.)); +#368574 = ORIENTED_EDGE('',*,*,#368575,.F.); +#368575 = EDGE_CURVE('',#368536,#368568,#368576,.T.); +#368576 = CIRCLE('',#368577,0.135001418495); +#368577 = AXIS2_PLACEMENT_3D('',#368578,#368579,#368580); +#368578 = CARTESIAN_POINT('',(134.10500141848,-130.1849985815,1.51)); +#368579 = DIRECTION('',(0.,0.,-1.)); +#368580 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368581 = CYLINDRICAL_SURFACE('',#368582,0.135001418495); +#368582 = AXIS2_PLACEMENT_3D('',#368583,#368584,#368585); +#368583 = CARTESIAN_POINT('',(134.10500141848,-130.1849985815,1.51)); +#368584 = DIRECTION('',(0.,0.,-1.)); +#368585 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368586 = ADVANCED_FACE('',(#368587),#368603,.T.); +#368587 = FACE_BOUND('',#368588,.T.); +#368588 = EDGE_LOOP('',(#368589,#368590,#368596,#368597)); +#368589 = ORIENTED_EDGE('',*,*,#368567,.T.); +#368590 = ORIENTED_EDGE('',*,*,#368591,.T.); +#368591 = EDGE_CURVE('',#368559,#368359,#368592,.T.); +#368592 = LINE('',#368593,#368594); +#368593 = CARTESIAN_POINT('',(133.97,-130.185,1.55)); +#368594 = VECTOR('',#368595,1.); +#368595 = DIRECTION('',(0.,1.,0.)); +#368596 = ORIENTED_EDGE('',*,*,#368356,.F.); +#368597 = ORIENTED_EDGE('',*,*,#368598,.F.); +#368598 = EDGE_CURVE('',#368568,#368357,#368599,.T.); +#368599 = LINE('',#368600,#368601); +#368600 = CARTESIAN_POINT('',(133.97,-130.185,1.51)); +#368601 = VECTOR('',#368602,1.); +#368602 = DIRECTION('',(0.,1.,0.)); +#368603 = PLANE('',#368604); +#368604 = AXIS2_PLACEMENT_3D('',#368605,#368606,#368607); +#368605 = CARTESIAN_POINT('',(133.97,-130.185,1.51)); +#368606 = DIRECTION('',(-1.,0.,0.)); +#368607 = DIRECTION('',(0.,1.,0.)); +#368608 = ADVANCED_FACE('',(#368609),#368619,.F.); +#368609 = FACE_BOUND('',#368610,.T.); +#368610 = EDGE_LOOP('',(#368611,#368612,#368613,#368614,#368615,#368616, + #368617,#368618)); +#368611 = ORIENTED_EDGE('',*,*,#368383,.T.); +#368612 = ORIENTED_EDGE('',*,*,#368415,.T.); +#368613 = ORIENTED_EDGE('',*,*,#368447,.T.); +#368614 = ORIENTED_EDGE('',*,*,#368479,.T.); +#368615 = ORIENTED_EDGE('',*,*,#368511,.T.); +#368616 = ORIENTED_EDGE('',*,*,#368543,.T.); +#368617 = ORIENTED_EDGE('',*,*,#368575,.T.); +#368618 = ORIENTED_EDGE('',*,*,#368598,.T.); +#368619 = PLANE('',#368620); +#368620 = AXIS2_PLACEMENT_3D('',#368621,#368622,#368623); +#368621 = CARTESIAN_POINT('',(0.,0.,1.51)); +#368622 = DIRECTION('',(0.,0.,1.)); +#368623 = DIRECTION('',(1.,0.,-0.)); +#368624 = ADVANCED_FACE('',(#368625),#368635,.T.); +#368625 = FACE_BOUND('',#368626,.F.); +#368626 = EDGE_LOOP('',(#368627,#368628,#368629,#368630,#368631,#368632, + #368633,#368634)); +#368627 = ORIENTED_EDGE('',*,*,#368366,.T.); +#368628 = ORIENTED_EDGE('',*,*,#368399,.T.); +#368629 = ORIENTED_EDGE('',*,*,#368430,.T.); +#368630 = ORIENTED_EDGE('',*,*,#368463,.T.); +#368631 = ORIENTED_EDGE('',*,*,#368494,.T.); +#368632 = ORIENTED_EDGE('',*,*,#368527,.T.); +#368633 = ORIENTED_EDGE('',*,*,#368558,.T.); +#368634 = ORIENTED_EDGE('',*,*,#368591,.T.); +#368635 = PLANE('',#368636); +#368636 = AXIS2_PLACEMENT_3D('',#368637,#368638,#368639); +#368637 = CARTESIAN_POINT('',(0.,0.,1.55)); +#368638 = DIRECTION('',(0.,0.,1.)); +#368639 = DIRECTION('',(1.,0.,-0.)); +#368640 = MANIFOLD_SOLID_BREP('',#368641); +#368641 = CLOSED_SHELL('',(#368642,#368684,#368715,#368748,#368779, + #368812,#368843,#368876,#368898,#368914)); +#368642 = ADVANCED_FACE('',(#368643),#368679,.T.); +#368643 = FACE_BOUND('',#368644,.T.); +#368644 = EDGE_LOOP('',(#368645,#368655,#368664,#368672)); +#368645 = ORIENTED_EDGE('',*,*,#368646,.T.); +#368646 = EDGE_CURVE('',#368647,#368649,#368651,.T.); +#368647 = VERTEX_POINT('',#368648); +#368648 = CARTESIAN_POINT('',(136.47,-129.815,1.51)); +#368649 = VERTEX_POINT('',#368650); +#368650 = CARTESIAN_POINT('',(136.47,-129.815,1.55)); +#368651 = LINE('',#368652,#368653); +#368652 = CARTESIAN_POINT('',(136.47,-129.815,1.51)); +#368653 = VECTOR('',#368654,1.); +#368654 = DIRECTION('',(0.,0.,1.)); +#368655 = ORIENTED_EDGE('',*,*,#368656,.T.); +#368656 = EDGE_CURVE('',#368649,#368657,#368659,.T.); +#368657 = VERTEX_POINT('',#368658); +#368658 = CARTESIAN_POINT('',(136.605,-129.68,1.55)); +#368659 = CIRCLE('',#368660,0.135001418495); +#368660 = AXIS2_PLACEMENT_3D('',#368661,#368662,#368663); +#368661 = CARTESIAN_POINT('',(136.60500141848,-129.8150014184,1.55)); +#368662 = DIRECTION('',(0.,0.,-1.)); +#368663 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368664 = ORIENTED_EDGE('',*,*,#368665,.F.); +#368665 = EDGE_CURVE('',#368666,#368657,#368668,.T.); +#368666 = VERTEX_POINT('',#368667); +#368667 = CARTESIAN_POINT('',(136.605,-129.68,1.51)); +#368668 = LINE('',#368669,#368670); +#368669 = CARTESIAN_POINT('',(136.605,-129.68,1.51)); +#368670 = VECTOR('',#368671,1.); +#368671 = DIRECTION('',(0.,0.,1.)); +#368672 = ORIENTED_EDGE('',*,*,#368673,.F.); +#368673 = EDGE_CURVE('',#368647,#368666,#368674,.T.); +#368674 = CIRCLE('',#368675,0.135001418495); +#368675 = AXIS2_PLACEMENT_3D('',#368676,#368677,#368678); +#368676 = CARTESIAN_POINT('',(136.60500141848,-129.8150014184,1.51)); +#368677 = DIRECTION('',(0.,0.,-1.)); +#368678 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368679 = CYLINDRICAL_SURFACE('',#368680,0.135001418495); +#368680 = AXIS2_PLACEMENT_3D('',#368681,#368682,#368683); +#368681 = CARTESIAN_POINT('',(136.60500141848,-129.8150014184,1.51)); +#368682 = DIRECTION('',(0.,0.,-1.)); +#368683 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#368684 = ADVANCED_FACE('',(#368685),#368710,.T.); +#368685 = FACE_BOUND('',#368686,.T.); +#368686 = EDGE_LOOP('',(#368687,#368688,#368696,#368704)); +#368687 = ORIENTED_EDGE('',*,*,#368665,.T.); +#368688 = ORIENTED_EDGE('',*,*,#368689,.T.); +#368689 = EDGE_CURVE('',#368657,#368690,#368692,.T.); +#368690 = VERTEX_POINT('',#368691); +#368691 = CARTESIAN_POINT('',(136.875,-129.68,1.55)); +#368692 = LINE('',#368693,#368694); +#368693 = CARTESIAN_POINT('',(136.605,-129.68,1.55)); +#368694 = VECTOR('',#368695,1.); +#368695 = DIRECTION('',(1.,0.,0.)); +#368696 = ORIENTED_EDGE('',*,*,#368697,.F.); +#368697 = EDGE_CURVE('',#368698,#368690,#368700,.T.); +#368698 = VERTEX_POINT('',#368699); +#368699 = CARTESIAN_POINT('',(136.875,-129.68,1.51)); +#368700 = LINE('',#368701,#368702); +#368701 = CARTESIAN_POINT('',(136.875,-129.68,1.51)); +#368702 = VECTOR('',#368703,1.); +#368703 = DIRECTION('',(0.,0.,1.)); +#368704 = ORIENTED_EDGE('',*,*,#368705,.F.); +#368705 = EDGE_CURVE('',#368666,#368698,#368706,.T.); +#368706 = LINE('',#368707,#368708); +#368707 = CARTESIAN_POINT('',(136.605,-129.68,1.51)); +#368708 = VECTOR('',#368709,1.); +#368709 = DIRECTION('',(1.,0.,0.)); +#368710 = PLANE('',#368711); +#368711 = AXIS2_PLACEMENT_3D('',#368712,#368713,#368714); +#368712 = CARTESIAN_POINT('',(136.605,-129.68,1.51)); +#368713 = DIRECTION('',(0.,1.,0.)); +#368714 = DIRECTION('',(1.,0.,0.)); +#368715 = ADVANCED_FACE('',(#368716),#368743,.T.); +#368716 = FACE_BOUND('',#368717,.T.); +#368717 = EDGE_LOOP('',(#368718,#368719,#368728,#368736)); +#368718 = ORIENTED_EDGE('',*,*,#368697,.T.); +#368719 = ORIENTED_EDGE('',*,*,#368720,.T.); +#368720 = EDGE_CURVE('',#368690,#368721,#368723,.T.); +#368721 = VERTEX_POINT('',#368722); +#368722 = CARTESIAN_POINT('',(137.01,-129.815,1.55)); +#368723 = CIRCLE('',#368724,0.135001418495); +#368724 = AXIS2_PLACEMENT_3D('',#368725,#368726,#368727); +#368725 = CARTESIAN_POINT('',(136.87499858151,-129.8150014184,1.55)); +#368726 = DIRECTION('',(0.,0.,-1.)); +#368727 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368728 = ORIENTED_EDGE('',*,*,#368729,.F.); +#368729 = EDGE_CURVE('',#368730,#368721,#368732,.T.); +#368730 = VERTEX_POINT('',#368731); +#368731 = CARTESIAN_POINT('',(137.01,-129.815,1.51)); +#368732 = LINE('',#368733,#368734); +#368733 = CARTESIAN_POINT('',(137.01,-129.815,1.51)); +#368734 = VECTOR('',#368735,1.); +#368735 = DIRECTION('',(0.,0.,1.)); +#368736 = ORIENTED_EDGE('',*,*,#368737,.F.); +#368737 = EDGE_CURVE('',#368698,#368730,#368738,.T.); +#368738 = CIRCLE('',#368739,0.135001418495); +#368739 = AXIS2_PLACEMENT_3D('',#368740,#368741,#368742); +#368740 = CARTESIAN_POINT('',(136.87499858151,-129.8150014184,1.51)); +#368741 = DIRECTION('',(0.,0.,-1.)); +#368742 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368743 = CYLINDRICAL_SURFACE('',#368744,0.135001418495); +#368744 = AXIS2_PLACEMENT_3D('',#368745,#368746,#368747); +#368745 = CARTESIAN_POINT('',(136.87499858151,-129.8150014184,1.51)); +#368746 = DIRECTION('',(0.,0.,-1.)); +#368747 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#368748 = ADVANCED_FACE('',(#368749),#368774,.T.); +#368749 = FACE_BOUND('',#368750,.T.); +#368750 = EDGE_LOOP('',(#368751,#368752,#368760,#368768)); +#368751 = ORIENTED_EDGE('',*,*,#368729,.T.); +#368752 = ORIENTED_EDGE('',*,*,#368753,.T.); +#368753 = EDGE_CURVE('',#368721,#368754,#368756,.T.); +#368754 = VERTEX_POINT('',#368755); +#368755 = CARTESIAN_POINT('',(137.01,-130.185,1.55)); +#368756 = LINE('',#368757,#368758); +#368757 = CARTESIAN_POINT('',(137.01,-129.815,1.55)); +#368758 = VECTOR('',#368759,1.); +#368759 = DIRECTION('',(0.,-1.,0.)); +#368760 = ORIENTED_EDGE('',*,*,#368761,.F.); +#368761 = EDGE_CURVE('',#368762,#368754,#368764,.T.); +#368762 = VERTEX_POINT('',#368763); +#368763 = CARTESIAN_POINT('',(137.01,-130.185,1.51)); +#368764 = LINE('',#368765,#368766); +#368765 = CARTESIAN_POINT('',(137.01,-130.185,1.51)); +#368766 = VECTOR('',#368767,1.); +#368767 = DIRECTION('',(0.,0.,1.)); +#368768 = ORIENTED_EDGE('',*,*,#368769,.F.); +#368769 = EDGE_CURVE('',#368730,#368762,#368770,.T.); +#368770 = LINE('',#368771,#368772); +#368771 = CARTESIAN_POINT('',(137.01,-129.815,1.51)); +#368772 = VECTOR('',#368773,1.); +#368773 = DIRECTION('',(0.,-1.,0.)); +#368774 = PLANE('',#368775); +#368775 = AXIS2_PLACEMENT_3D('',#368776,#368777,#368778); +#368776 = CARTESIAN_POINT('',(137.01,-129.815,1.51)); +#368777 = DIRECTION('',(1.,0.,-0.)); +#368778 = DIRECTION('',(0.,-1.,0.)); +#368779 = ADVANCED_FACE('',(#368780),#368807,.T.); +#368780 = FACE_BOUND('',#368781,.T.); +#368781 = EDGE_LOOP('',(#368782,#368783,#368792,#368800)); +#368782 = ORIENTED_EDGE('',*,*,#368761,.T.); +#368783 = ORIENTED_EDGE('',*,*,#368784,.T.); +#368784 = EDGE_CURVE('',#368754,#368785,#368787,.T.); +#368785 = VERTEX_POINT('',#368786); +#368786 = CARTESIAN_POINT('',(136.875,-130.32,1.55)); +#368787 = CIRCLE('',#368788,0.135001418495); +#368788 = AXIS2_PLACEMENT_3D('',#368789,#368790,#368791); +#368789 = CARTESIAN_POINT('',(136.87499858151,-130.1849985815,1.55)); +#368790 = DIRECTION('',(0.,0.,-1.)); +#368791 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368792 = ORIENTED_EDGE('',*,*,#368793,.F.); +#368793 = EDGE_CURVE('',#368794,#368785,#368796,.T.); +#368794 = VERTEX_POINT('',#368795); +#368795 = CARTESIAN_POINT('',(136.875,-130.32,1.51)); +#368796 = LINE('',#368797,#368798); +#368797 = CARTESIAN_POINT('',(136.875,-130.32,1.51)); +#368798 = VECTOR('',#368799,1.); +#368799 = DIRECTION('',(0.,0.,1.)); +#368800 = ORIENTED_EDGE('',*,*,#368801,.F.); +#368801 = EDGE_CURVE('',#368762,#368794,#368802,.T.); +#368802 = CIRCLE('',#368803,0.135001418495); +#368803 = AXIS2_PLACEMENT_3D('',#368804,#368805,#368806); +#368804 = CARTESIAN_POINT('',(136.87499858151,-130.1849985815,1.51)); +#368805 = DIRECTION('',(0.,0.,-1.)); +#368806 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368807 = CYLINDRICAL_SURFACE('',#368808,0.135001418495); +#368808 = AXIS2_PLACEMENT_3D('',#368809,#368810,#368811); +#368809 = CARTESIAN_POINT('',(136.87499858151,-130.1849985815,1.51)); +#368810 = DIRECTION('',(0.,0.,-1.)); +#368811 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#368812 = ADVANCED_FACE('',(#368813),#368838,.T.); +#368813 = FACE_BOUND('',#368814,.T.); +#368814 = EDGE_LOOP('',(#368815,#368816,#368824,#368832)); +#368815 = ORIENTED_EDGE('',*,*,#368793,.T.); +#368816 = ORIENTED_EDGE('',*,*,#368817,.T.); +#368817 = EDGE_CURVE('',#368785,#368818,#368820,.T.); +#368818 = VERTEX_POINT('',#368819); +#368819 = CARTESIAN_POINT('',(136.605,-130.32,1.55)); +#368820 = LINE('',#368821,#368822); +#368821 = CARTESIAN_POINT('',(136.875,-130.32,1.55)); +#368822 = VECTOR('',#368823,1.); +#368823 = DIRECTION('',(-1.,0.,0.)); +#368824 = ORIENTED_EDGE('',*,*,#368825,.F.); +#368825 = EDGE_CURVE('',#368826,#368818,#368828,.T.); +#368826 = VERTEX_POINT('',#368827); +#368827 = CARTESIAN_POINT('',(136.605,-130.32,1.51)); +#368828 = LINE('',#368829,#368830); +#368829 = CARTESIAN_POINT('',(136.605,-130.32,1.51)); +#368830 = VECTOR('',#368831,1.); +#368831 = DIRECTION('',(0.,0.,1.)); +#368832 = ORIENTED_EDGE('',*,*,#368833,.F.); +#368833 = EDGE_CURVE('',#368794,#368826,#368834,.T.); +#368834 = LINE('',#368835,#368836); +#368835 = CARTESIAN_POINT('',(136.875,-130.32,1.51)); +#368836 = VECTOR('',#368837,1.); +#368837 = DIRECTION('',(-1.,0.,0.)); +#368838 = PLANE('',#368839); +#368839 = AXIS2_PLACEMENT_3D('',#368840,#368841,#368842); +#368840 = CARTESIAN_POINT('',(136.875,-130.32,1.51)); +#368841 = DIRECTION('',(0.,-1.,0.)); +#368842 = DIRECTION('',(-1.,0.,0.)); +#368843 = ADVANCED_FACE('',(#368844),#368871,.T.); +#368844 = FACE_BOUND('',#368845,.T.); +#368845 = EDGE_LOOP('',(#368846,#368847,#368856,#368864)); +#368846 = ORIENTED_EDGE('',*,*,#368825,.T.); +#368847 = ORIENTED_EDGE('',*,*,#368848,.T.); +#368848 = EDGE_CURVE('',#368818,#368849,#368851,.T.); +#368849 = VERTEX_POINT('',#368850); +#368850 = CARTESIAN_POINT('',(136.47,-130.185,1.55)); +#368851 = CIRCLE('',#368852,0.135001418495); +#368852 = AXIS2_PLACEMENT_3D('',#368853,#368854,#368855); +#368853 = CARTESIAN_POINT('',(136.60500141848,-130.1849985815,1.55)); +#368854 = DIRECTION('',(0.,0.,-1.)); +#368855 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368856 = ORIENTED_EDGE('',*,*,#368857,.F.); +#368857 = EDGE_CURVE('',#368858,#368849,#368860,.T.); +#368858 = VERTEX_POINT('',#368859); +#368859 = CARTESIAN_POINT('',(136.47,-130.185,1.51)); +#368860 = LINE('',#368861,#368862); +#368861 = CARTESIAN_POINT('',(136.47,-130.185,1.51)); +#368862 = VECTOR('',#368863,1.); +#368863 = DIRECTION('',(0.,0.,1.)); +#368864 = ORIENTED_EDGE('',*,*,#368865,.F.); +#368865 = EDGE_CURVE('',#368826,#368858,#368866,.T.); +#368866 = CIRCLE('',#368867,0.135001418495); +#368867 = AXIS2_PLACEMENT_3D('',#368868,#368869,#368870); +#368868 = CARTESIAN_POINT('',(136.60500141848,-130.1849985815,1.51)); +#368869 = DIRECTION('',(0.,0.,-1.)); +#368870 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368871 = CYLINDRICAL_SURFACE('',#368872,0.135001418495); +#368872 = AXIS2_PLACEMENT_3D('',#368873,#368874,#368875); +#368873 = CARTESIAN_POINT('',(136.60500141848,-130.1849985815,1.51)); +#368874 = DIRECTION('',(0.,0.,-1.)); +#368875 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#368876 = ADVANCED_FACE('',(#368877),#368893,.T.); +#368877 = FACE_BOUND('',#368878,.T.); +#368878 = EDGE_LOOP('',(#368879,#368880,#368886,#368887)); +#368879 = ORIENTED_EDGE('',*,*,#368857,.T.); +#368880 = ORIENTED_EDGE('',*,*,#368881,.T.); +#368881 = EDGE_CURVE('',#368849,#368649,#368882,.T.); +#368882 = LINE('',#368883,#368884); +#368883 = CARTESIAN_POINT('',(136.47,-130.185,1.55)); +#368884 = VECTOR('',#368885,1.); +#368885 = DIRECTION('',(0.,1.,0.)); +#368886 = ORIENTED_EDGE('',*,*,#368646,.F.); +#368887 = ORIENTED_EDGE('',*,*,#368888,.F.); +#368888 = EDGE_CURVE('',#368858,#368647,#368889,.T.); +#368889 = LINE('',#368890,#368891); +#368890 = CARTESIAN_POINT('',(136.47,-130.185,1.51)); +#368891 = VECTOR('',#368892,1.); +#368892 = DIRECTION('',(0.,1.,0.)); +#368893 = PLANE('',#368894); +#368894 = AXIS2_PLACEMENT_3D('',#368895,#368896,#368897); +#368895 = CARTESIAN_POINT('',(136.47,-130.185,1.51)); +#368896 = DIRECTION('',(-1.,0.,0.)); +#368897 = DIRECTION('',(0.,1.,0.)); +#368898 = ADVANCED_FACE('',(#368899),#368909,.F.); +#368899 = FACE_BOUND('',#368900,.T.); +#368900 = EDGE_LOOP('',(#368901,#368902,#368903,#368904,#368905,#368906, + #368907,#368908)); +#368901 = ORIENTED_EDGE('',*,*,#368673,.T.); +#368902 = ORIENTED_EDGE('',*,*,#368705,.T.); +#368903 = ORIENTED_EDGE('',*,*,#368737,.T.); +#368904 = ORIENTED_EDGE('',*,*,#368769,.T.); +#368905 = ORIENTED_EDGE('',*,*,#368801,.T.); +#368906 = ORIENTED_EDGE('',*,*,#368833,.T.); +#368907 = ORIENTED_EDGE('',*,*,#368865,.T.); +#368908 = ORIENTED_EDGE('',*,*,#368888,.T.); +#368909 = PLANE('',#368910); +#368910 = AXIS2_PLACEMENT_3D('',#368911,#368912,#368913); +#368911 = CARTESIAN_POINT('',(0.,0.,1.51)); +#368912 = DIRECTION('',(0.,0.,1.)); +#368913 = DIRECTION('',(1.,0.,-0.)); +#368914 = ADVANCED_FACE('',(#368915),#368925,.T.); +#368915 = FACE_BOUND('',#368916,.F.); +#368916 = EDGE_LOOP('',(#368917,#368918,#368919,#368920,#368921,#368922, + #368923,#368924)); +#368917 = ORIENTED_EDGE('',*,*,#368656,.T.); +#368918 = ORIENTED_EDGE('',*,*,#368689,.T.); +#368919 = ORIENTED_EDGE('',*,*,#368720,.T.); +#368920 = ORIENTED_EDGE('',*,*,#368753,.T.); +#368921 = ORIENTED_EDGE('',*,*,#368784,.T.); +#368922 = ORIENTED_EDGE('',*,*,#368817,.T.); +#368923 = ORIENTED_EDGE('',*,*,#368848,.T.); +#368924 = ORIENTED_EDGE('',*,*,#368881,.T.); +#368925 = PLANE('',#368926); +#368926 = AXIS2_PLACEMENT_3D('',#368927,#368928,#368929); +#368927 = CARTESIAN_POINT('',(0.,0.,1.55)); +#368928 = DIRECTION('',(0.,0.,1.)); +#368929 = DIRECTION('',(1.,0.,-0.)); +#368930 = MANIFOLD_SOLID_BREP('',#368931); +#368931 = CLOSED_SHELL('',(#368932,#368974,#369005,#369038,#369069, + #369102,#369133,#369166,#369188,#369204)); +#368932 = ADVANCED_FACE('',(#368933),#368969,.T.); +#368933 = FACE_BOUND('',#368934,.T.); +#368934 = EDGE_LOOP('',(#368935,#368945,#368954,#368962)); +#368935 = ORIENTED_EDGE('',*,*,#368936,.T.); +#368936 = EDGE_CURVE('',#368937,#368939,#368941,.T.); +#368937 = VERTEX_POINT('',#368938); +#368938 = CARTESIAN_POINT('',(134.93,-131.08,1.51)); +#368939 = VERTEX_POINT('',#368940); +#368940 = CARTESIAN_POINT('',(134.93,-131.08,1.55)); +#368941 = LINE('',#368942,#368943); +#368942 = CARTESIAN_POINT('',(134.93,-131.08,1.51)); +#368943 = VECTOR('',#368944,1.); +#368944 = DIRECTION('',(0.,0.,1.)); +#368945 = ORIENTED_EDGE('',*,*,#368946,.T.); +#368946 = EDGE_CURVE('',#368939,#368947,#368949,.T.); +#368947 = VERTEX_POINT('',#368948); +#368948 = CARTESIAN_POINT('',(135.07,-130.94,1.55)); +#368949 = CIRCLE('',#368950,0.139999827125); +#368950 = AXIS2_PLACEMENT_3D('',#368951,#368952,#368953); +#368951 = CARTESIAN_POINT('',(135.06999982712,-131.0799998271,1.55)); +#368952 = DIRECTION('',(0.,0.,-1.)); +#368953 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#368954 = ORIENTED_EDGE('',*,*,#368955,.F.); +#368955 = EDGE_CURVE('',#368956,#368947,#368958,.T.); +#368956 = VERTEX_POINT('',#368957); +#368957 = CARTESIAN_POINT('',(135.07,-130.94,1.51)); +#368958 = LINE('',#368959,#368960); +#368959 = CARTESIAN_POINT('',(135.07,-130.94,1.51)); +#368960 = VECTOR('',#368961,1.); +#368961 = DIRECTION('',(0.,0.,1.)); +#368962 = ORIENTED_EDGE('',*,*,#368963,.F.); +#368963 = EDGE_CURVE('',#368937,#368956,#368964,.T.); +#368964 = CIRCLE('',#368965,0.139999827125); +#368965 = AXIS2_PLACEMENT_3D('',#368966,#368967,#368968); +#368966 = CARTESIAN_POINT('',(135.06999982712,-131.0799998271,1.51)); +#368967 = DIRECTION('',(0.,0.,-1.)); +#368968 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#368969 = CYLINDRICAL_SURFACE('',#368970,0.139999827125); +#368970 = AXIS2_PLACEMENT_3D('',#368971,#368972,#368973); +#368971 = CARTESIAN_POINT('',(135.06999982712,-131.0799998271,1.51)); +#368972 = DIRECTION('',(0.,0.,-1.)); +#368973 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#368974 = ADVANCED_FACE('',(#368975),#369000,.T.); +#368975 = FACE_BOUND('',#368976,.T.); +#368976 = EDGE_LOOP('',(#368977,#368978,#368986,#368994)); +#368977 = ORIENTED_EDGE('',*,*,#368955,.T.); +#368978 = ORIENTED_EDGE('',*,*,#368979,.T.); +#368979 = EDGE_CURVE('',#368947,#368980,#368982,.T.); +#368980 = VERTEX_POINT('',#368981); +#368981 = CARTESIAN_POINT('',(135.35,-130.94,1.55)); +#368982 = LINE('',#368983,#368984); +#368983 = CARTESIAN_POINT('',(135.07,-130.94,1.55)); +#368984 = VECTOR('',#368985,1.); +#368985 = DIRECTION('',(1.,0.,0.)); +#368986 = ORIENTED_EDGE('',*,*,#368987,.F.); +#368987 = EDGE_CURVE('',#368988,#368980,#368990,.T.); +#368988 = VERTEX_POINT('',#368989); +#368989 = CARTESIAN_POINT('',(135.35,-130.94,1.51)); +#368990 = LINE('',#368991,#368992); +#368991 = CARTESIAN_POINT('',(135.35,-130.94,1.51)); +#368992 = VECTOR('',#368993,1.); +#368993 = DIRECTION('',(0.,0.,1.)); +#368994 = ORIENTED_EDGE('',*,*,#368995,.F.); +#368995 = EDGE_CURVE('',#368956,#368988,#368996,.T.); +#368996 = LINE('',#368997,#368998); +#368997 = CARTESIAN_POINT('',(135.07,-130.94,1.51)); +#368998 = VECTOR('',#368999,1.); +#368999 = DIRECTION('',(1.,0.,0.)); +#369000 = PLANE('',#369001); +#369001 = AXIS2_PLACEMENT_3D('',#369002,#369003,#369004); +#369002 = CARTESIAN_POINT('',(135.07,-130.94,1.51)); +#369003 = DIRECTION('',(0.,1.,0.)); +#369004 = DIRECTION('',(1.,0.,0.)); +#369005 = ADVANCED_FACE('',(#369006),#369033,.T.); +#369006 = FACE_BOUND('',#369007,.T.); +#369007 = EDGE_LOOP('',(#369008,#369009,#369018,#369026)); +#369008 = ORIENTED_EDGE('',*,*,#368987,.T.); +#369009 = ORIENTED_EDGE('',*,*,#369010,.T.); +#369010 = EDGE_CURVE('',#368980,#369011,#369013,.T.); +#369011 = VERTEX_POINT('',#369012); +#369012 = CARTESIAN_POINT('',(135.49,-131.08,1.55)); +#369013 = CIRCLE('',#369014,0.139999827125); +#369014 = AXIS2_PLACEMENT_3D('',#369015,#369016,#369017); +#369015 = CARTESIAN_POINT('',(135.35000017287,-131.0799998271,1.55)); +#369016 = DIRECTION('',(0.,0.,-1.)); +#369017 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#369018 = ORIENTED_EDGE('',*,*,#369019,.F.); +#369019 = EDGE_CURVE('',#369020,#369011,#369022,.T.); +#369020 = VERTEX_POINT('',#369021); +#369021 = CARTESIAN_POINT('',(135.49,-131.08,1.51)); +#369022 = LINE('',#369023,#369024); +#369023 = CARTESIAN_POINT('',(135.49,-131.08,1.51)); +#369024 = VECTOR('',#369025,1.); +#369025 = DIRECTION('',(0.,0.,1.)); +#369026 = ORIENTED_EDGE('',*,*,#369027,.F.); +#369027 = EDGE_CURVE('',#368988,#369020,#369028,.T.); +#369028 = CIRCLE('',#369029,0.139999827125); +#369029 = AXIS2_PLACEMENT_3D('',#369030,#369031,#369032); +#369030 = CARTESIAN_POINT('',(135.35000017287,-131.0799998271,1.51)); +#369031 = DIRECTION('',(0.,0.,-1.)); +#369032 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#369033 = CYLINDRICAL_SURFACE('',#369034,0.139999827125); +#369034 = AXIS2_PLACEMENT_3D('',#369035,#369036,#369037); +#369035 = CARTESIAN_POINT('',(135.35000017287,-131.0799998271,1.51)); +#369036 = DIRECTION('',(0.,0.,-1.)); +#369037 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#369038 = ADVANCED_FACE('',(#369039),#369064,.T.); +#369039 = FACE_BOUND('',#369040,.T.); +#369040 = EDGE_LOOP('',(#369041,#369042,#369050,#369058)); +#369041 = ORIENTED_EDGE('',*,*,#369019,.T.); +#369042 = ORIENTED_EDGE('',*,*,#369043,.T.); +#369043 = EDGE_CURVE('',#369011,#369044,#369046,.T.); +#369044 = VERTEX_POINT('',#369045); +#369045 = CARTESIAN_POINT('',(135.49,-131.42,1.55)); +#369046 = LINE('',#369047,#369048); +#369047 = CARTESIAN_POINT('',(135.49,-131.08,1.55)); +#369048 = VECTOR('',#369049,1.); +#369049 = DIRECTION('',(0.,-1.,0.)); +#369050 = ORIENTED_EDGE('',*,*,#369051,.F.); +#369051 = EDGE_CURVE('',#369052,#369044,#369054,.T.); +#369052 = VERTEX_POINT('',#369053); +#369053 = CARTESIAN_POINT('',(135.49,-131.42,1.51)); +#369054 = LINE('',#369055,#369056); +#369055 = CARTESIAN_POINT('',(135.49,-131.42,1.51)); +#369056 = VECTOR('',#369057,1.); +#369057 = DIRECTION('',(0.,0.,1.)); +#369058 = ORIENTED_EDGE('',*,*,#369059,.F.); +#369059 = EDGE_CURVE('',#369020,#369052,#369060,.T.); +#369060 = LINE('',#369061,#369062); +#369061 = CARTESIAN_POINT('',(135.49,-131.08,1.51)); +#369062 = VECTOR('',#369063,1.); +#369063 = DIRECTION('',(0.,-1.,0.)); +#369064 = PLANE('',#369065); +#369065 = AXIS2_PLACEMENT_3D('',#369066,#369067,#369068); +#369066 = CARTESIAN_POINT('',(135.49,-131.08,1.51)); +#369067 = DIRECTION('',(1.,0.,-0.)); +#369068 = DIRECTION('',(0.,-1.,0.)); +#369069 = ADVANCED_FACE('',(#369070),#369097,.T.); +#369070 = FACE_BOUND('',#369071,.T.); +#369071 = EDGE_LOOP('',(#369072,#369073,#369082,#369090)); +#369072 = ORIENTED_EDGE('',*,*,#369051,.T.); +#369073 = ORIENTED_EDGE('',*,*,#369074,.T.); +#369074 = EDGE_CURVE('',#369044,#369075,#369077,.T.); +#369075 = VERTEX_POINT('',#369076); +#369076 = CARTESIAN_POINT('',(135.35,-131.56,1.55)); +#369077 = CIRCLE('',#369078,0.139999827125); +#369078 = AXIS2_PLACEMENT_3D('',#369079,#369080,#369081); +#369079 = CARTESIAN_POINT('',(135.35000017287,-131.4200001728,1.55)); +#369080 = DIRECTION('',(0.,0.,-1.)); +#369081 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#369082 = ORIENTED_EDGE('',*,*,#369083,.F.); +#369083 = EDGE_CURVE('',#369084,#369075,#369086,.T.); +#369084 = VERTEX_POINT('',#369085); +#369085 = CARTESIAN_POINT('',(135.35,-131.56,1.51)); +#369086 = LINE('',#369087,#369088); +#369087 = CARTESIAN_POINT('',(135.35,-131.56,1.51)); +#369088 = VECTOR('',#369089,1.); +#369089 = DIRECTION('',(0.,0.,1.)); +#369090 = ORIENTED_EDGE('',*,*,#369091,.F.); +#369091 = EDGE_CURVE('',#369052,#369084,#369092,.T.); +#369092 = CIRCLE('',#369093,0.139999827125); +#369093 = AXIS2_PLACEMENT_3D('',#369094,#369095,#369096); +#369094 = CARTESIAN_POINT('',(135.35000017287,-131.4200001728,1.51)); +#369095 = DIRECTION('',(0.,0.,-1.)); +#369096 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#369097 = CYLINDRICAL_SURFACE('',#369098,0.139999827125); +#369098 = AXIS2_PLACEMENT_3D('',#369099,#369100,#369101); +#369099 = CARTESIAN_POINT('',(135.35000017287,-131.4200001728,1.51)); +#369100 = DIRECTION('',(0.,0.,-1.)); +#369101 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#369102 = ADVANCED_FACE('',(#369103),#369128,.T.); +#369103 = FACE_BOUND('',#369104,.T.); +#369104 = EDGE_LOOP('',(#369105,#369106,#369114,#369122)); +#369105 = ORIENTED_EDGE('',*,*,#369083,.T.); +#369106 = ORIENTED_EDGE('',*,*,#369107,.T.); +#369107 = EDGE_CURVE('',#369075,#369108,#369110,.T.); +#369108 = VERTEX_POINT('',#369109); +#369109 = CARTESIAN_POINT('',(135.07,-131.56,1.55)); +#369110 = LINE('',#369111,#369112); +#369111 = CARTESIAN_POINT('',(135.35,-131.56,1.55)); +#369112 = VECTOR('',#369113,1.); +#369113 = DIRECTION('',(-1.,0.,0.)); +#369114 = ORIENTED_EDGE('',*,*,#369115,.F.); +#369115 = EDGE_CURVE('',#369116,#369108,#369118,.T.); +#369116 = VERTEX_POINT('',#369117); +#369117 = CARTESIAN_POINT('',(135.07,-131.56,1.51)); +#369118 = LINE('',#369119,#369120); +#369119 = CARTESIAN_POINT('',(135.07,-131.56,1.51)); +#369120 = VECTOR('',#369121,1.); +#369121 = DIRECTION('',(0.,0.,1.)); +#369122 = ORIENTED_EDGE('',*,*,#369123,.F.); +#369123 = EDGE_CURVE('',#369084,#369116,#369124,.T.); +#369124 = LINE('',#369125,#369126); +#369125 = CARTESIAN_POINT('',(135.35,-131.56,1.51)); +#369126 = VECTOR('',#369127,1.); +#369127 = DIRECTION('',(-1.,0.,0.)); +#369128 = PLANE('',#369129); +#369129 = AXIS2_PLACEMENT_3D('',#369130,#369131,#369132); +#369130 = CARTESIAN_POINT('',(135.35,-131.56,1.51)); +#369131 = DIRECTION('',(0.,-1.,0.)); +#369132 = DIRECTION('',(-1.,0.,0.)); +#369133 = ADVANCED_FACE('',(#369134),#369161,.T.); +#369134 = FACE_BOUND('',#369135,.T.); +#369135 = EDGE_LOOP('',(#369136,#369137,#369146,#369154)); +#369136 = ORIENTED_EDGE('',*,*,#369115,.T.); +#369137 = ORIENTED_EDGE('',*,*,#369138,.T.); +#369138 = EDGE_CURVE('',#369108,#369139,#369141,.T.); +#369139 = VERTEX_POINT('',#369140); +#369140 = CARTESIAN_POINT('',(134.93,-131.42,1.55)); +#369141 = CIRCLE('',#369142,0.139999827125); +#369142 = AXIS2_PLACEMENT_3D('',#369143,#369144,#369145); +#369143 = CARTESIAN_POINT('',(135.06999982712,-131.4200001728,1.55)); +#369144 = DIRECTION('',(0.,0.,-1.)); +#369145 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#369146 = ORIENTED_EDGE('',*,*,#369147,.F.); +#369147 = EDGE_CURVE('',#369148,#369139,#369150,.T.); +#369148 = VERTEX_POINT('',#369149); +#369149 = CARTESIAN_POINT('',(134.93,-131.42,1.51)); +#369150 = LINE('',#369151,#369152); +#369151 = CARTESIAN_POINT('',(134.93,-131.42,1.51)); +#369152 = VECTOR('',#369153,1.); +#369153 = DIRECTION('',(0.,0.,1.)); +#369154 = ORIENTED_EDGE('',*,*,#369155,.F.); +#369155 = EDGE_CURVE('',#369116,#369148,#369156,.T.); +#369156 = CIRCLE('',#369157,0.139999827125); +#369157 = AXIS2_PLACEMENT_3D('',#369158,#369159,#369160); +#369158 = CARTESIAN_POINT('',(135.06999982712,-131.4200001728,1.51)); +#369159 = DIRECTION('',(0.,0.,-1.)); +#369160 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#369161 = CYLINDRICAL_SURFACE('',#369162,0.139999827125); +#369162 = AXIS2_PLACEMENT_3D('',#369163,#369164,#369165); +#369163 = CARTESIAN_POINT('',(135.06999982712,-131.4200001728,1.51)); +#369164 = DIRECTION('',(0.,0.,-1.)); +#369165 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#369166 = ADVANCED_FACE('',(#369167),#369183,.T.); +#369167 = FACE_BOUND('',#369168,.T.); +#369168 = EDGE_LOOP('',(#369169,#369170,#369176,#369177)); +#369169 = ORIENTED_EDGE('',*,*,#369147,.T.); +#369170 = ORIENTED_EDGE('',*,*,#369171,.T.); +#369171 = EDGE_CURVE('',#369139,#368939,#369172,.T.); +#369172 = LINE('',#369173,#369174); +#369173 = CARTESIAN_POINT('',(134.93,-131.42,1.55)); +#369174 = VECTOR('',#369175,1.); +#369175 = DIRECTION('',(0.,1.,0.)); +#369176 = ORIENTED_EDGE('',*,*,#368936,.F.); +#369177 = ORIENTED_EDGE('',*,*,#369178,.F.); +#369178 = EDGE_CURVE('',#369148,#368937,#369179,.T.); +#369179 = LINE('',#369180,#369181); +#369180 = CARTESIAN_POINT('',(134.93,-131.42,1.51)); +#369181 = VECTOR('',#369182,1.); +#369182 = DIRECTION('',(0.,1.,0.)); +#369183 = PLANE('',#369184); +#369184 = AXIS2_PLACEMENT_3D('',#369185,#369186,#369187); +#369185 = CARTESIAN_POINT('',(134.93,-131.42,1.51)); +#369186 = DIRECTION('',(-1.,0.,0.)); +#369187 = DIRECTION('',(0.,1.,0.)); +#369188 = ADVANCED_FACE('',(#369189),#369199,.F.); +#369189 = FACE_BOUND('',#369190,.T.); +#369190 = EDGE_LOOP('',(#369191,#369192,#369193,#369194,#369195,#369196, + #369197,#369198)); +#369191 = ORIENTED_EDGE('',*,*,#368963,.T.); +#369192 = ORIENTED_EDGE('',*,*,#368995,.T.); +#369193 = ORIENTED_EDGE('',*,*,#369027,.T.); +#369194 = ORIENTED_EDGE('',*,*,#369059,.T.); +#369195 = ORIENTED_EDGE('',*,*,#369091,.T.); +#369196 = ORIENTED_EDGE('',*,*,#369123,.T.); +#369197 = ORIENTED_EDGE('',*,*,#369155,.T.); +#369198 = ORIENTED_EDGE('',*,*,#369178,.T.); +#369199 = PLANE('',#369200); +#369200 = AXIS2_PLACEMENT_3D('',#369201,#369202,#369203); +#369201 = CARTESIAN_POINT('',(0.,0.,1.51)); +#369202 = DIRECTION('',(0.,0.,1.)); +#369203 = DIRECTION('',(1.,0.,-0.)); +#369204 = ADVANCED_FACE('',(#369205),#369215,.T.); +#369205 = FACE_BOUND('',#369206,.F.); +#369206 = EDGE_LOOP('',(#369207,#369208,#369209,#369210,#369211,#369212, + #369213,#369214)); +#369207 = ORIENTED_EDGE('',*,*,#368946,.T.); +#369208 = ORIENTED_EDGE('',*,*,#368979,.T.); +#369209 = ORIENTED_EDGE('',*,*,#369010,.T.); +#369210 = ORIENTED_EDGE('',*,*,#369043,.T.); +#369211 = ORIENTED_EDGE('',*,*,#369074,.T.); +#369212 = ORIENTED_EDGE('',*,*,#369107,.T.); +#369213 = ORIENTED_EDGE('',*,*,#369138,.T.); +#369214 = ORIENTED_EDGE('',*,*,#369171,.T.); +#369215 = PLANE('',#369216); +#369216 = AXIS2_PLACEMENT_3D('',#369217,#369218,#369219); +#369217 = CARTESIAN_POINT('',(0.,0.,1.55)); +#369218 = DIRECTION('',(0.,0.,1.)); +#369219 = DIRECTION('',(1.,0.,-0.)); +#369220 = MANIFOLD_SOLID_BREP('',#369221); +#369221 = CLOSED_SHELL('',(#369222,#369264,#369295,#369328,#369359, + #369392,#369423,#369456,#369478,#369494)); +#369222 = ADVANCED_FACE('',(#369223),#369259,.T.); +#369223 = FACE_BOUND('',#369224,.T.); +#369224 = EDGE_LOOP('',(#369225,#369235,#369244,#369252)); +#369225 = ORIENTED_EDGE('',*,*,#369226,.T.); +#369226 = EDGE_CURVE('',#369227,#369229,#369231,.T.); +#369227 = VERTEX_POINT('',#369228); +#369228 = CARTESIAN_POINT('',(134.99,-129.815,1.51)); +#369229 = VERTEX_POINT('',#369230); +#369230 = CARTESIAN_POINT('',(134.99,-129.815,1.55)); +#369231 = LINE('',#369232,#369233); +#369232 = CARTESIAN_POINT('',(134.99,-129.815,1.51)); +#369233 = VECTOR('',#369234,1.); +#369234 = DIRECTION('',(0.,0.,1.)); +#369235 = ORIENTED_EDGE('',*,*,#369236,.T.); +#369236 = EDGE_CURVE('',#369229,#369237,#369239,.T.); +#369237 = VERTEX_POINT('',#369238); +#369238 = CARTESIAN_POINT('',(135.125,-129.68,1.55)); +#369239 = CIRCLE('',#369240,0.135001418495); +#369240 = AXIS2_PLACEMENT_3D('',#369241,#369242,#369243); +#369241 = CARTESIAN_POINT('',(135.12500141848,-129.8150014184,1.55)); +#369242 = DIRECTION('',(0.,0.,-1.)); +#369243 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369244 = ORIENTED_EDGE('',*,*,#369245,.F.); +#369245 = EDGE_CURVE('',#369246,#369237,#369248,.T.); +#369246 = VERTEX_POINT('',#369247); +#369247 = CARTESIAN_POINT('',(135.125,-129.68,1.51)); +#369248 = LINE('',#369249,#369250); +#369249 = CARTESIAN_POINT('',(135.125,-129.68,1.51)); +#369250 = VECTOR('',#369251,1.); +#369251 = DIRECTION('',(0.,0.,1.)); +#369252 = ORIENTED_EDGE('',*,*,#369253,.F.); +#369253 = EDGE_CURVE('',#369227,#369246,#369254,.T.); +#369254 = CIRCLE('',#369255,0.135001418495); +#369255 = AXIS2_PLACEMENT_3D('',#369256,#369257,#369258); +#369256 = CARTESIAN_POINT('',(135.12500141848,-129.8150014184,1.51)); +#369257 = DIRECTION('',(0.,0.,-1.)); +#369258 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369259 = CYLINDRICAL_SURFACE('',#369260,0.135001418495); +#369260 = AXIS2_PLACEMENT_3D('',#369261,#369262,#369263); +#369261 = CARTESIAN_POINT('',(135.12500141848,-129.8150014184,1.51)); +#369262 = DIRECTION('',(0.,0.,-1.)); +#369263 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369264 = ADVANCED_FACE('',(#369265),#369290,.T.); +#369265 = FACE_BOUND('',#369266,.T.); +#369266 = EDGE_LOOP('',(#369267,#369268,#369276,#369284)); +#369267 = ORIENTED_EDGE('',*,*,#369245,.T.); +#369268 = ORIENTED_EDGE('',*,*,#369269,.T.); +#369269 = EDGE_CURVE('',#369237,#369270,#369272,.T.); +#369270 = VERTEX_POINT('',#369271); +#369271 = CARTESIAN_POINT('',(135.395,-129.68,1.55)); +#369272 = LINE('',#369273,#369274); +#369273 = CARTESIAN_POINT('',(135.125,-129.68,1.55)); +#369274 = VECTOR('',#369275,1.); +#369275 = DIRECTION('',(1.,0.,0.)); +#369276 = ORIENTED_EDGE('',*,*,#369277,.F.); +#369277 = EDGE_CURVE('',#369278,#369270,#369280,.T.); +#369278 = VERTEX_POINT('',#369279); +#369279 = CARTESIAN_POINT('',(135.395,-129.68,1.51)); +#369280 = LINE('',#369281,#369282); +#369281 = CARTESIAN_POINT('',(135.395,-129.68,1.51)); +#369282 = VECTOR('',#369283,1.); +#369283 = DIRECTION('',(0.,0.,1.)); +#369284 = ORIENTED_EDGE('',*,*,#369285,.F.); +#369285 = EDGE_CURVE('',#369246,#369278,#369286,.T.); +#369286 = LINE('',#369287,#369288); +#369287 = CARTESIAN_POINT('',(135.125,-129.68,1.51)); +#369288 = VECTOR('',#369289,1.); +#369289 = DIRECTION('',(1.,0.,0.)); +#369290 = PLANE('',#369291); +#369291 = AXIS2_PLACEMENT_3D('',#369292,#369293,#369294); +#369292 = CARTESIAN_POINT('',(135.125,-129.68,1.51)); +#369293 = DIRECTION('',(0.,1.,0.)); +#369294 = DIRECTION('',(1.,0.,0.)); +#369295 = ADVANCED_FACE('',(#369296),#369323,.T.); +#369296 = FACE_BOUND('',#369297,.T.); +#369297 = EDGE_LOOP('',(#369298,#369299,#369308,#369316)); +#369298 = ORIENTED_EDGE('',*,*,#369277,.T.); +#369299 = ORIENTED_EDGE('',*,*,#369300,.T.); +#369300 = EDGE_CURVE('',#369270,#369301,#369303,.T.); +#369301 = VERTEX_POINT('',#369302); +#369302 = CARTESIAN_POINT('',(135.53,-129.815,1.55)); +#369303 = CIRCLE('',#369304,0.135001418495); +#369304 = AXIS2_PLACEMENT_3D('',#369305,#369306,#369307); +#369305 = CARTESIAN_POINT('',(135.39499858151,-129.8150014184,1.55)); +#369306 = DIRECTION('',(0.,0.,-1.)); +#369307 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#369308 = ORIENTED_EDGE('',*,*,#369309,.F.); +#369309 = EDGE_CURVE('',#369310,#369301,#369312,.T.); +#369310 = VERTEX_POINT('',#369311); +#369311 = CARTESIAN_POINT('',(135.53,-129.815,1.51)); +#369312 = LINE('',#369313,#369314); +#369313 = CARTESIAN_POINT('',(135.53,-129.815,1.51)); +#369314 = VECTOR('',#369315,1.); +#369315 = DIRECTION('',(0.,0.,1.)); +#369316 = ORIENTED_EDGE('',*,*,#369317,.F.); +#369317 = EDGE_CURVE('',#369278,#369310,#369318,.T.); +#369318 = CIRCLE('',#369319,0.135001418495); +#369319 = AXIS2_PLACEMENT_3D('',#369320,#369321,#369322); +#369320 = CARTESIAN_POINT('',(135.39499858151,-129.8150014184,1.51)); +#369321 = DIRECTION('',(0.,0.,-1.)); +#369322 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#369323 = CYLINDRICAL_SURFACE('',#369324,0.135001418495); +#369324 = AXIS2_PLACEMENT_3D('',#369325,#369326,#369327); +#369325 = CARTESIAN_POINT('',(135.39499858151,-129.8150014184,1.51)); +#369326 = DIRECTION('',(0.,0.,-1.)); +#369327 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#369328 = ADVANCED_FACE('',(#369329),#369354,.T.); +#369329 = FACE_BOUND('',#369330,.T.); +#369330 = EDGE_LOOP('',(#369331,#369332,#369340,#369348)); +#369331 = ORIENTED_EDGE('',*,*,#369309,.T.); +#369332 = ORIENTED_EDGE('',*,*,#369333,.T.); +#369333 = EDGE_CURVE('',#369301,#369334,#369336,.T.); +#369334 = VERTEX_POINT('',#369335); +#369335 = CARTESIAN_POINT('',(135.53,-130.185,1.55)); +#369336 = LINE('',#369337,#369338); +#369337 = CARTESIAN_POINT('',(135.53,-129.815,1.55)); +#369338 = VECTOR('',#369339,1.); +#369339 = DIRECTION('',(0.,-1.,0.)); +#369340 = ORIENTED_EDGE('',*,*,#369341,.F.); +#369341 = EDGE_CURVE('',#369342,#369334,#369344,.T.); +#369342 = VERTEX_POINT('',#369343); +#369343 = CARTESIAN_POINT('',(135.53,-130.185,1.51)); +#369344 = LINE('',#369345,#369346); +#369345 = CARTESIAN_POINT('',(135.53,-130.185,1.51)); +#369346 = VECTOR('',#369347,1.); +#369347 = DIRECTION('',(0.,0.,1.)); +#369348 = ORIENTED_EDGE('',*,*,#369349,.F.); +#369349 = EDGE_CURVE('',#369310,#369342,#369350,.T.); +#369350 = LINE('',#369351,#369352); +#369351 = CARTESIAN_POINT('',(135.53,-129.815,1.51)); +#369352 = VECTOR('',#369353,1.); +#369353 = DIRECTION('',(0.,-1.,0.)); +#369354 = PLANE('',#369355); +#369355 = AXIS2_PLACEMENT_3D('',#369356,#369357,#369358); +#369356 = CARTESIAN_POINT('',(135.53,-129.815,1.51)); +#369357 = DIRECTION('',(1.,0.,-0.)); +#369358 = DIRECTION('',(0.,-1.,0.)); +#369359 = ADVANCED_FACE('',(#369360),#369387,.T.); +#369360 = FACE_BOUND('',#369361,.T.); +#369361 = EDGE_LOOP('',(#369362,#369363,#369372,#369380)); +#369362 = ORIENTED_EDGE('',*,*,#369341,.T.); +#369363 = ORIENTED_EDGE('',*,*,#369364,.T.); +#369364 = EDGE_CURVE('',#369334,#369365,#369367,.T.); +#369365 = VERTEX_POINT('',#369366); +#369366 = CARTESIAN_POINT('',(135.395,-130.32,1.55)); +#369367 = CIRCLE('',#369368,0.135001418495); +#369368 = AXIS2_PLACEMENT_3D('',#369369,#369370,#369371); +#369369 = CARTESIAN_POINT('',(135.39499858151,-130.1849985815,1.55)); +#369370 = DIRECTION('',(0.,0.,-1.)); +#369371 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#369372 = ORIENTED_EDGE('',*,*,#369373,.F.); +#369373 = EDGE_CURVE('',#369374,#369365,#369376,.T.); +#369374 = VERTEX_POINT('',#369375); +#369375 = CARTESIAN_POINT('',(135.395,-130.32,1.51)); +#369376 = LINE('',#369377,#369378); +#369377 = CARTESIAN_POINT('',(135.395,-130.32,1.51)); +#369378 = VECTOR('',#369379,1.); +#369379 = DIRECTION('',(0.,0.,1.)); +#369380 = ORIENTED_EDGE('',*,*,#369381,.F.); +#369381 = EDGE_CURVE('',#369342,#369374,#369382,.T.); +#369382 = CIRCLE('',#369383,0.135001418495); +#369383 = AXIS2_PLACEMENT_3D('',#369384,#369385,#369386); +#369384 = CARTESIAN_POINT('',(135.39499858151,-130.1849985815,1.51)); +#369385 = DIRECTION('',(0.,0.,-1.)); +#369386 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#369387 = CYLINDRICAL_SURFACE('',#369388,0.135001418495); +#369388 = AXIS2_PLACEMENT_3D('',#369389,#369390,#369391); +#369389 = CARTESIAN_POINT('',(135.39499858151,-130.1849985815,1.51)); +#369390 = DIRECTION('',(0.,0.,-1.)); +#369391 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#369392 = ADVANCED_FACE('',(#369393),#369418,.T.); +#369393 = FACE_BOUND('',#369394,.T.); +#369394 = EDGE_LOOP('',(#369395,#369396,#369404,#369412)); +#369395 = ORIENTED_EDGE('',*,*,#369373,.T.); +#369396 = ORIENTED_EDGE('',*,*,#369397,.T.); +#369397 = EDGE_CURVE('',#369365,#369398,#369400,.T.); +#369398 = VERTEX_POINT('',#369399); +#369399 = CARTESIAN_POINT('',(135.125,-130.32,1.55)); +#369400 = LINE('',#369401,#369402); +#369401 = CARTESIAN_POINT('',(135.395,-130.32,1.55)); +#369402 = VECTOR('',#369403,1.); +#369403 = DIRECTION('',(-1.,0.,0.)); +#369404 = ORIENTED_EDGE('',*,*,#369405,.F.); +#369405 = EDGE_CURVE('',#369406,#369398,#369408,.T.); +#369406 = VERTEX_POINT('',#369407); +#369407 = CARTESIAN_POINT('',(135.125,-130.32,1.51)); +#369408 = LINE('',#369409,#369410); +#369409 = CARTESIAN_POINT('',(135.125,-130.32,1.51)); +#369410 = VECTOR('',#369411,1.); +#369411 = DIRECTION('',(0.,0.,1.)); +#369412 = ORIENTED_EDGE('',*,*,#369413,.F.); +#369413 = EDGE_CURVE('',#369374,#369406,#369414,.T.); +#369414 = LINE('',#369415,#369416); +#369415 = CARTESIAN_POINT('',(135.395,-130.32,1.51)); +#369416 = VECTOR('',#369417,1.); +#369417 = DIRECTION('',(-1.,0.,0.)); +#369418 = PLANE('',#369419); +#369419 = AXIS2_PLACEMENT_3D('',#369420,#369421,#369422); +#369420 = CARTESIAN_POINT('',(135.395,-130.32,1.51)); +#369421 = DIRECTION('',(0.,-1.,0.)); +#369422 = DIRECTION('',(-1.,0.,0.)); +#369423 = ADVANCED_FACE('',(#369424),#369451,.T.); +#369424 = FACE_BOUND('',#369425,.T.); +#369425 = EDGE_LOOP('',(#369426,#369427,#369436,#369444)); +#369426 = ORIENTED_EDGE('',*,*,#369405,.T.); +#369427 = ORIENTED_EDGE('',*,*,#369428,.T.); +#369428 = EDGE_CURVE('',#369398,#369429,#369431,.T.); +#369429 = VERTEX_POINT('',#369430); +#369430 = CARTESIAN_POINT('',(134.99,-130.185,1.55)); +#369431 = CIRCLE('',#369432,0.135001418495); +#369432 = AXIS2_PLACEMENT_3D('',#369433,#369434,#369435); +#369433 = CARTESIAN_POINT('',(135.12500141848,-130.1849985815,1.55)); +#369434 = DIRECTION('',(0.,0.,-1.)); +#369435 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#369436 = ORIENTED_EDGE('',*,*,#369437,.F.); +#369437 = EDGE_CURVE('',#369438,#369429,#369440,.T.); +#369438 = VERTEX_POINT('',#369439); +#369439 = CARTESIAN_POINT('',(134.99,-130.185,1.51)); +#369440 = LINE('',#369441,#369442); +#369441 = CARTESIAN_POINT('',(134.99,-130.185,1.51)); +#369442 = VECTOR('',#369443,1.); +#369443 = DIRECTION('',(0.,0.,1.)); +#369444 = ORIENTED_EDGE('',*,*,#369445,.F.); +#369445 = EDGE_CURVE('',#369406,#369438,#369446,.T.); +#369446 = CIRCLE('',#369447,0.135001418495); +#369447 = AXIS2_PLACEMENT_3D('',#369448,#369449,#369450); +#369448 = CARTESIAN_POINT('',(135.12500141848,-130.1849985815,1.51)); +#369449 = DIRECTION('',(0.,0.,-1.)); +#369450 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#369451 = CYLINDRICAL_SURFACE('',#369452,0.135001418495); +#369452 = AXIS2_PLACEMENT_3D('',#369453,#369454,#369455); +#369453 = CARTESIAN_POINT('',(135.12500141848,-130.1849985815,1.51)); +#369454 = DIRECTION('',(0.,0.,-1.)); +#369455 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#369456 = ADVANCED_FACE('',(#369457),#369473,.T.); +#369457 = FACE_BOUND('',#369458,.T.); +#369458 = EDGE_LOOP('',(#369459,#369460,#369466,#369467)); +#369459 = ORIENTED_EDGE('',*,*,#369437,.T.); +#369460 = ORIENTED_EDGE('',*,*,#369461,.T.); +#369461 = EDGE_CURVE('',#369429,#369229,#369462,.T.); +#369462 = LINE('',#369463,#369464); +#369463 = CARTESIAN_POINT('',(134.99,-130.185,1.55)); +#369464 = VECTOR('',#369465,1.); +#369465 = DIRECTION('',(0.,1.,0.)); +#369466 = ORIENTED_EDGE('',*,*,#369226,.F.); +#369467 = ORIENTED_EDGE('',*,*,#369468,.F.); +#369468 = EDGE_CURVE('',#369438,#369227,#369469,.T.); +#369469 = LINE('',#369470,#369471); +#369470 = CARTESIAN_POINT('',(134.99,-130.185,1.51)); +#369471 = VECTOR('',#369472,1.); +#369472 = DIRECTION('',(0.,1.,0.)); +#369473 = PLANE('',#369474); +#369474 = AXIS2_PLACEMENT_3D('',#369475,#369476,#369477); +#369475 = CARTESIAN_POINT('',(134.99,-130.185,1.51)); +#369476 = DIRECTION('',(-1.,0.,0.)); +#369477 = DIRECTION('',(0.,1.,0.)); +#369478 = ADVANCED_FACE('',(#369479),#369489,.F.); +#369479 = FACE_BOUND('',#369480,.T.); +#369480 = EDGE_LOOP('',(#369481,#369482,#369483,#369484,#369485,#369486, + #369487,#369488)); +#369481 = ORIENTED_EDGE('',*,*,#369253,.T.); +#369482 = ORIENTED_EDGE('',*,*,#369285,.T.); +#369483 = ORIENTED_EDGE('',*,*,#369317,.T.); +#369484 = ORIENTED_EDGE('',*,*,#369349,.T.); +#369485 = ORIENTED_EDGE('',*,*,#369381,.T.); +#369486 = ORIENTED_EDGE('',*,*,#369413,.T.); +#369487 = ORIENTED_EDGE('',*,*,#369445,.T.); +#369488 = ORIENTED_EDGE('',*,*,#369468,.T.); +#369489 = PLANE('',#369490); +#369490 = AXIS2_PLACEMENT_3D('',#369491,#369492,#369493); +#369491 = CARTESIAN_POINT('',(0.,0.,1.51)); +#369492 = DIRECTION('',(0.,0.,1.)); +#369493 = DIRECTION('',(1.,0.,-0.)); +#369494 = ADVANCED_FACE('',(#369495),#369505,.T.); +#369495 = FACE_BOUND('',#369496,.F.); +#369496 = EDGE_LOOP('',(#369497,#369498,#369499,#369500,#369501,#369502, + #369503,#369504)); +#369497 = ORIENTED_EDGE('',*,*,#369236,.T.); +#369498 = ORIENTED_EDGE('',*,*,#369269,.T.); +#369499 = ORIENTED_EDGE('',*,*,#369300,.T.); +#369500 = ORIENTED_EDGE('',*,*,#369333,.T.); +#369501 = ORIENTED_EDGE('',*,*,#369364,.T.); +#369502 = ORIENTED_EDGE('',*,*,#369397,.T.); +#369503 = ORIENTED_EDGE('',*,*,#369428,.T.); +#369504 = ORIENTED_EDGE('',*,*,#369461,.T.); +#369505 = PLANE('',#369506); +#369506 = AXIS2_PLACEMENT_3D('',#369507,#369508,#369509); +#369507 = CARTESIAN_POINT('',(0.,0.,1.55)); +#369508 = DIRECTION('',(0.,0.,1.)); +#369509 = DIRECTION('',(1.,0.,-0.)); +#369510 = MANIFOLD_SOLID_BREP('',#369511); +#369511 = CLOSED_SHELL('',(#369512,#369545,#369565,#369585)); +#369512 = ADVANCED_FACE('',(#369513),#369540,.T.); +#369513 = FACE_BOUND('',#369514,.F.); +#369514 = EDGE_LOOP('',(#369515,#369525,#369532,#369533)); +#369515 = ORIENTED_EDGE('',*,*,#369516,.T.); +#369516 = EDGE_CURVE('',#369517,#369519,#369521,.T.); +#369517 = VERTEX_POINT('',#369518); +#369518 = CARTESIAN_POINT('',(140.7155,-149.5,1.51)); +#369519 = VERTEX_POINT('',#369520); +#369520 = CARTESIAN_POINT('',(140.7155,-149.5,1.55)); +#369521 = LINE('',#369522,#369523); +#369522 = CARTESIAN_POINT('',(140.7155,-149.5,1.51)); +#369523 = VECTOR('',#369524,1.); +#369524 = DIRECTION('',(0.,0.,1.)); +#369525 = ORIENTED_EDGE('',*,*,#369526,.T.); +#369526 = EDGE_CURVE('',#369519,#369519,#369527,.T.); +#369527 = CIRCLE('',#369528,0.7155); +#369528 = AXIS2_PLACEMENT_3D('',#369529,#369530,#369531); +#369529 = CARTESIAN_POINT('',(140.,-149.5,1.55)); +#369530 = DIRECTION('',(0.,0.,1.)); +#369531 = DIRECTION('',(1.,0.,-0.)); +#369532 = ORIENTED_EDGE('',*,*,#369516,.F.); +#369533 = ORIENTED_EDGE('',*,*,#369534,.F.); +#369534 = EDGE_CURVE('',#369517,#369517,#369535,.T.); +#369535 = CIRCLE('',#369536,0.7155); +#369536 = AXIS2_PLACEMENT_3D('',#369537,#369538,#369539); +#369537 = CARTESIAN_POINT('',(140.,-149.5,1.51)); +#369538 = DIRECTION('',(0.,0.,1.)); +#369539 = DIRECTION('',(1.,0.,-0.)); +#369540 = CYLINDRICAL_SURFACE('',#369541,0.7155); +#369541 = AXIS2_PLACEMENT_3D('',#369542,#369543,#369544); +#369542 = CARTESIAN_POINT('',(140.,-149.5,1.51)); +#369543 = DIRECTION('',(-0.,-0.,-1.)); +#369544 = DIRECTION('',(1.,0.,-0.)); +#369545 = ADVANCED_FACE('',(#369546,#369549),#369560,.F.); +#369546 = FACE_BOUND('',#369547,.F.); +#369547 = EDGE_LOOP('',(#369548)); +#369548 = ORIENTED_EDGE('',*,*,#369534,.T.); +#369549 = FACE_BOUND('',#369550,.F.); +#369550 = EDGE_LOOP('',(#369551)); +#369551 = ORIENTED_EDGE('',*,*,#369552,.T.); +#369552 = EDGE_CURVE('',#369553,#369553,#369555,.T.); +#369553 = VERTEX_POINT('',#369554); +#369554 = CARTESIAN_POINT('',(140.,-149.935,1.51)); +#369555 = CIRCLE('',#369556,0.435); +#369556 = AXIS2_PLACEMENT_3D('',#369557,#369558,#369559); +#369557 = CARTESIAN_POINT('',(140.,-149.5,1.51)); +#369558 = DIRECTION('',(-0.,0.,-1.)); +#369559 = DIRECTION('',(-0.,-1.,0.)); +#369560 = PLANE('',#369561); +#369561 = AXIS2_PLACEMENT_3D('',#369562,#369563,#369564); +#369562 = CARTESIAN_POINT('',(0.,0.,1.51)); +#369563 = DIRECTION('',(0.,0.,1.)); +#369564 = DIRECTION('',(1.,0.,-0.)); +#369565 = ADVANCED_FACE('',(#369566,#369569),#369580,.T.); +#369566 = FACE_BOUND('',#369567,.T.); +#369567 = EDGE_LOOP('',(#369568)); +#369568 = ORIENTED_EDGE('',*,*,#369526,.T.); +#369569 = FACE_BOUND('',#369570,.T.); +#369570 = EDGE_LOOP('',(#369571)); +#369571 = ORIENTED_EDGE('',*,*,#369572,.T.); +#369572 = EDGE_CURVE('',#369573,#369573,#369575,.T.); +#369573 = VERTEX_POINT('',#369574); +#369574 = CARTESIAN_POINT('',(140.,-149.935,1.55)); +#369575 = CIRCLE('',#369576,0.435); +#369576 = AXIS2_PLACEMENT_3D('',#369577,#369578,#369579); +#369577 = CARTESIAN_POINT('',(140.,-149.5,1.55)); +#369578 = DIRECTION('',(-0.,0.,-1.)); +#369579 = DIRECTION('',(-0.,-1.,0.)); +#369580 = PLANE('',#369581); +#369581 = AXIS2_PLACEMENT_3D('',#369582,#369583,#369584); +#369582 = CARTESIAN_POINT('',(0.,0.,1.55)); +#369583 = DIRECTION('',(0.,0.,1.)); +#369584 = DIRECTION('',(1.,0.,-0.)); +#369585 = ADVANCED_FACE('',(#369586),#369597,.F.); +#369586 = FACE_BOUND('',#369587,.T.); +#369587 = EDGE_LOOP('',(#369588,#369589,#369595,#369596)); +#369588 = ORIENTED_EDGE('',*,*,#369552,.T.); +#369589 = ORIENTED_EDGE('',*,*,#369590,.T.); +#369590 = EDGE_CURVE('',#369553,#369573,#369591,.T.); +#369591 = LINE('',#369592,#369593); +#369592 = CARTESIAN_POINT('',(140.,-149.935,-4.6E-02)); +#369593 = VECTOR('',#369594,1.); +#369594 = DIRECTION('',(0.,0.,1.)); +#369595 = ORIENTED_EDGE('',*,*,#369572,.F.); +#369596 = ORIENTED_EDGE('',*,*,#369590,.F.); +#369597 = CYLINDRICAL_SURFACE('',#369598,0.435); +#369598 = AXIS2_PLACEMENT_3D('',#369599,#369600,#369601); +#369599 = CARTESIAN_POINT('',(140.,-149.5,-4.6E-02)); +#369600 = DIRECTION('',(-0.,-0.,-1.)); +#369601 = DIRECTION('',(-0.,-1.,0.)); +#369602 = MANIFOLD_SOLID_BREP('',#369603); +#369603 = CLOSED_SHELL('',(#369604,#369637,#369657,#369677)); +#369604 = ADVANCED_FACE('',(#369605),#369632,.T.); +#369605 = FACE_BOUND('',#369606,.T.); +#369606 = EDGE_LOOP('',(#369607,#369617,#369624,#369625)); +#369607 = ORIENTED_EDGE('',*,*,#369608,.T.); +#369608 = EDGE_CURVE('',#369609,#369611,#369613,.T.); +#369609 = VERTEX_POINT('',#369610); +#369610 = CARTESIAN_POINT('',(140.7155,-149.5,0.)); +#369611 = VERTEX_POINT('',#369612); +#369612 = CARTESIAN_POINT('',(140.7155,-149.5,-4.E-02)); +#369613 = LINE('',#369614,#369615); +#369614 = CARTESIAN_POINT('',(140.7155,-149.5,0.)); +#369615 = VECTOR('',#369616,1.); +#369616 = DIRECTION('',(0.,0.,-1.)); +#369617 = ORIENTED_EDGE('',*,*,#369618,.T.); +#369618 = EDGE_CURVE('',#369611,#369611,#369619,.T.); +#369619 = CIRCLE('',#369620,0.7155); +#369620 = AXIS2_PLACEMENT_3D('',#369621,#369622,#369623); +#369621 = CARTESIAN_POINT('',(140.,-149.5,-4.E-02)); +#369622 = DIRECTION('',(0.,0.,1.)); +#369623 = DIRECTION('',(1.,0.,-0.)); +#369624 = ORIENTED_EDGE('',*,*,#369608,.F.); +#369625 = ORIENTED_EDGE('',*,*,#369626,.F.); +#369626 = EDGE_CURVE('',#369609,#369609,#369627,.T.); +#369627 = CIRCLE('',#369628,0.7155); +#369628 = AXIS2_PLACEMENT_3D('',#369629,#369630,#369631); +#369629 = CARTESIAN_POINT('',(140.,-149.5,0.)); +#369630 = DIRECTION('',(0.,0.,1.)); +#369631 = DIRECTION('',(1.,0.,-0.)); +#369632 = CYLINDRICAL_SURFACE('',#369633,0.7155); +#369633 = AXIS2_PLACEMENT_3D('',#369634,#369635,#369636); +#369634 = CARTESIAN_POINT('',(140.,-149.5,0.)); +#369635 = DIRECTION('',(0.,0.,1.)); +#369636 = DIRECTION('',(1.,0.,-0.)); +#369637 = ADVANCED_FACE('',(#369638,#369641),#369652,.F.); +#369638 = FACE_BOUND('',#369639,.F.); +#369639 = EDGE_LOOP('',(#369640)); +#369640 = ORIENTED_EDGE('',*,*,#369626,.F.); +#369641 = FACE_BOUND('',#369642,.F.); +#369642 = EDGE_LOOP('',(#369643)); +#369643 = ORIENTED_EDGE('',*,*,#369644,.F.); +#369644 = EDGE_CURVE('',#369645,#369645,#369647,.T.); +#369645 = VERTEX_POINT('',#369646); +#369646 = CARTESIAN_POINT('',(140.,-149.935,0.)); +#369647 = CIRCLE('',#369648,0.435); +#369648 = AXIS2_PLACEMENT_3D('',#369649,#369650,#369651); +#369649 = CARTESIAN_POINT('',(140.,-149.5,0.)); +#369650 = DIRECTION('',(-0.,0.,-1.)); +#369651 = DIRECTION('',(-0.,-1.,0.)); +#369652 = PLANE('',#369653); +#369653 = AXIS2_PLACEMENT_3D('',#369654,#369655,#369656); +#369654 = CARTESIAN_POINT('',(0.,0.,0.)); +#369655 = DIRECTION('',(-0.,-0.,-1.)); +#369656 = DIRECTION('',(-1.,0.,0.)); +#369657 = ADVANCED_FACE('',(#369658,#369661),#369672,.T.); +#369658 = FACE_BOUND('',#369659,.T.); +#369659 = EDGE_LOOP('',(#369660)); +#369660 = ORIENTED_EDGE('',*,*,#369618,.F.); +#369661 = FACE_BOUND('',#369662,.T.); +#369662 = EDGE_LOOP('',(#369663)); +#369663 = ORIENTED_EDGE('',*,*,#369664,.F.); +#369664 = EDGE_CURVE('',#369665,#369665,#369667,.T.); +#369665 = VERTEX_POINT('',#369666); +#369666 = CARTESIAN_POINT('',(140.,-149.935,-4.E-02)); +#369667 = CIRCLE('',#369668,0.435); +#369668 = AXIS2_PLACEMENT_3D('',#369669,#369670,#369671); +#369669 = CARTESIAN_POINT('',(140.,-149.5,-4.E-02)); +#369670 = DIRECTION('',(-0.,0.,-1.)); +#369671 = DIRECTION('',(-0.,-1.,0.)); +#369672 = PLANE('',#369673); +#369673 = AXIS2_PLACEMENT_3D('',#369674,#369675,#369676); +#369674 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#369675 = DIRECTION('',(-0.,-0.,-1.)); +#369676 = DIRECTION('',(-1.,0.,0.)); +#369677 = ADVANCED_FACE('',(#369678),#369689,.F.); +#369678 = FACE_BOUND('',#369679,.T.); +#369679 = EDGE_LOOP('',(#369680,#369681,#369687,#369688)); +#369680 = ORIENTED_EDGE('',*,*,#369664,.T.); +#369681 = ORIENTED_EDGE('',*,*,#369682,.T.); +#369682 = EDGE_CURVE('',#369665,#369645,#369683,.T.); +#369683 = LINE('',#369684,#369685); +#369684 = CARTESIAN_POINT('',(140.,-149.935,-4.6E-02)); +#369685 = VECTOR('',#369686,1.); +#369686 = DIRECTION('',(0.,0.,1.)); +#369687 = ORIENTED_EDGE('',*,*,#369644,.F.); +#369688 = ORIENTED_EDGE('',*,*,#369682,.F.); +#369689 = CYLINDRICAL_SURFACE('',#369690,0.435); +#369690 = AXIS2_PLACEMENT_3D('',#369691,#369692,#369693); +#369691 = CARTESIAN_POINT('',(140.,-149.5,-4.6E-02)); +#369692 = DIRECTION('',(-0.,-0.,-1.)); +#369693 = DIRECTION('',(-0.,-1.,0.)); +#369694 = MANIFOLD_SOLID_BREP('',#369695); +#369695 = CLOSED_SHELL('',(#369696,#369729,#369749,#369769)); +#369696 = ADVANCED_FACE('',(#369697),#369724,.T.); +#369697 = FACE_BOUND('',#369698,.F.); +#369698 = EDGE_LOOP('',(#369699,#369709,#369716,#369717)); +#369699 = ORIENTED_EDGE('',*,*,#369700,.T.); +#369700 = EDGE_CURVE('',#369701,#369703,#369705,.T.); +#369701 = VERTEX_POINT('',#369702); +#369702 = CARTESIAN_POINT('',(140.,-149.96,-4.E-02)); +#369703 = VERTEX_POINT('',#369704); +#369704 = CARTESIAN_POINT('',(140.,-149.96,1.55)); +#369705 = LINE('',#369706,#369707); +#369706 = CARTESIAN_POINT('',(140.,-149.96,-4.E-02)); +#369707 = VECTOR('',#369708,1.); +#369708 = DIRECTION('',(0.,0.,1.)); +#369709 = ORIENTED_EDGE('',*,*,#369710,.T.); +#369710 = EDGE_CURVE('',#369703,#369703,#369711,.T.); +#369711 = CIRCLE('',#369712,0.46); +#369712 = AXIS2_PLACEMENT_3D('',#369713,#369714,#369715); +#369713 = CARTESIAN_POINT('',(140.,-149.5,1.55)); +#369714 = DIRECTION('',(0.,0.,1.)); +#369715 = DIRECTION('',(-0.,-1.,0.)); +#369716 = ORIENTED_EDGE('',*,*,#369700,.F.); +#369717 = ORIENTED_EDGE('',*,*,#369718,.F.); +#369718 = EDGE_CURVE('',#369701,#369701,#369719,.T.); +#369719 = CIRCLE('',#369720,0.46); +#369720 = AXIS2_PLACEMENT_3D('',#369721,#369722,#369723); +#369721 = CARTESIAN_POINT('',(140.,-149.5,-4.E-02)); +#369722 = DIRECTION('',(0.,0.,1.)); +#369723 = DIRECTION('',(-0.,-1.,0.)); +#369724 = CYLINDRICAL_SURFACE('',#369725,0.46); +#369725 = AXIS2_PLACEMENT_3D('',#369726,#369727,#369728); +#369726 = CARTESIAN_POINT('',(140.,-149.5,-4.E-02)); +#369727 = DIRECTION('',(-0.,-0.,-1.)); +#369728 = DIRECTION('',(-0.,-1.,0.)); +#369729 = ADVANCED_FACE('',(#369730,#369733),#369744,.F.); +#369730 = FACE_BOUND('',#369731,.F.); +#369731 = EDGE_LOOP('',(#369732)); +#369732 = ORIENTED_EDGE('',*,*,#369718,.T.); +#369733 = FACE_BOUND('',#369734,.F.); +#369734 = EDGE_LOOP('',(#369735)); +#369735 = ORIENTED_EDGE('',*,*,#369736,.T.); +#369736 = EDGE_CURVE('',#369737,#369737,#369739,.T.); +#369737 = VERTEX_POINT('',#369738); +#369738 = CARTESIAN_POINT('',(140.,-149.935,-4.E-02)); +#369739 = CIRCLE('',#369740,0.435); +#369740 = AXIS2_PLACEMENT_3D('',#369741,#369742,#369743); +#369741 = CARTESIAN_POINT('',(140.,-149.5,-4.E-02)); +#369742 = DIRECTION('',(-0.,0.,-1.)); +#369743 = DIRECTION('',(-0.,-1.,0.)); +#369744 = PLANE('',#369745); +#369745 = AXIS2_PLACEMENT_3D('',#369746,#369747,#369748); +#369746 = CARTESIAN_POINT('',(140.,-149.96,-4.E-02)); +#369747 = DIRECTION('',(0.,0.,1.)); +#369748 = DIRECTION('',(1.,0.,-0.)); +#369749 = ADVANCED_FACE('',(#369750,#369753),#369764,.T.); +#369750 = FACE_BOUND('',#369751,.T.); +#369751 = EDGE_LOOP('',(#369752)); +#369752 = ORIENTED_EDGE('',*,*,#369710,.T.); +#369753 = FACE_BOUND('',#369754,.T.); +#369754 = EDGE_LOOP('',(#369755)); +#369755 = ORIENTED_EDGE('',*,*,#369756,.T.); +#369756 = EDGE_CURVE('',#369757,#369757,#369759,.T.); +#369757 = VERTEX_POINT('',#369758); +#369758 = CARTESIAN_POINT('',(140.,-149.935,1.55)); +#369759 = CIRCLE('',#369760,0.435); +#369760 = AXIS2_PLACEMENT_3D('',#369761,#369762,#369763); +#369761 = CARTESIAN_POINT('',(140.,-149.5,1.55)); +#369762 = DIRECTION('',(-0.,0.,-1.)); +#369763 = DIRECTION('',(-0.,-1.,0.)); +#369764 = PLANE('',#369765); +#369765 = AXIS2_PLACEMENT_3D('',#369766,#369767,#369768); +#369766 = CARTESIAN_POINT('',(140.,-149.96,1.55)); +#369767 = DIRECTION('',(0.,0.,1.)); +#369768 = DIRECTION('',(1.,0.,-0.)); +#369769 = ADVANCED_FACE('',(#369770),#369781,.F.); +#369770 = FACE_BOUND('',#369771,.T.); +#369771 = EDGE_LOOP('',(#369772,#369773,#369779,#369780)); +#369772 = ORIENTED_EDGE('',*,*,#369736,.T.); +#369773 = ORIENTED_EDGE('',*,*,#369774,.T.); +#369774 = EDGE_CURVE('',#369737,#369757,#369775,.T.); +#369775 = LINE('',#369776,#369777); +#369776 = CARTESIAN_POINT('',(140.,-149.935,-4.6E-02)); +#369777 = VECTOR('',#369778,1.); +#369778 = DIRECTION('',(0.,0.,1.)); +#369779 = ORIENTED_EDGE('',*,*,#369756,.F.); +#369780 = ORIENTED_EDGE('',*,*,#369774,.F.); +#369781 = CYLINDRICAL_SURFACE('',#369782,0.435); +#369782 = AXIS2_PLACEMENT_3D('',#369783,#369784,#369785); +#369783 = CARTESIAN_POINT('',(140.,-149.5,-4.6E-02)); +#369784 = DIRECTION('',(-0.,-0.,-1.)); +#369785 = DIRECTION('',(-0.,-1.,0.)); +#369786 = MANIFOLD_SOLID_BREP('',#369787); +#369787 = CLOSED_SHELL('',(#369788,#369828,#369859,#369890,#369912, + #369924)); +#369788 = ADVANCED_FACE('',(#369789),#369823,.T.); +#369789 = FACE_BOUND('',#369790,.T.); +#369790 = EDGE_LOOP('',(#369791,#369801,#369809,#369817)); +#369791 = ORIENTED_EDGE('',*,*,#369792,.T.); +#369792 = EDGE_CURVE('',#369793,#369795,#369797,.T.); +#369793 = VERTEX_POINT('',#369794); +#369794 = CARTESIAN_POINT('',(128.5,-73.99,1.51)); +#369795 = VERTEX_POINT('',#369796); +#369796 = CARTESIAN_POINT('',(128.5,-73.99,1.55)); +#369797 = LINE('',#369798,#369799); +#369798 = CARTESIAN_POINT('',(128.5,-73.99,1.51)); +#369799 = VECTOR('',#369800,1.); +#369800 = DIRECTION('',(0.,0.,1.)); +#369801 = ORIENTED_EDGE('',*,*,#369802,.T.); +#369802 = EDGE_CURVE('',#369795,#369803,#369805,.T.); +#369803 = VERTEX_POINT('',#369804); +#369804 = CARTESIAN_POINT('',(128.5,-73.09,1.55)); +#369805 = LINE('',#369806,#369807); +#369806 = CARTESIAN_POINT('',(128.5,-73.99,1.55)); +#369807 = VECTOR('',#369808,1.); +#369808 = DIRECTION('',(0.,1.,0.)); +#369809 = ORIENTED_EDGE('',*,*,#369810,.F.); +#369810 = EDGE_CURVE('',#369811,#369803,#369813,.T.); +#369811 = VERTEX_POINT('',#369812); +#369812 = CARTESIAN_POINT('',(128.5,-73.09,1.51)); +#369813 = LINE('',#369814,#369815); +#369814 = CARTESIAN_POINT('',(128.5,-73.09,1.51)); +#369815 = VECTOR('',#369816,1.); +#369816 = DIRECTION('',(0.,0.,1.)); +#369817 = ORIENTED_EDGE('',*,*,#369818,.F.); +#369818 = EDGE_CURVE('',#369793,#369811,#369819,.T.); +#369819 = LINE('',#369820,#369821); +#369820 = CARTESIAN_POINT('',(128.5,-73.99,1.51)); +#369821 = VECTOR('',#369822,1.); +#369822 = DIRECTION('',(0.,1.,0.)); +#369823 = PLANE('',#369824); +#369824 = AXIS2_PLACEMENT_3D('',#369825,#369826,#369827); +#369825 = CARTESIAN_POINT('',(128.5,-73.99,1.51)); +#369826 = DIRECTION('',(-1.,0.,0.)); +#369827 = DIRECTION('',(0.,1.,0.)); +#369828 = ADVANCED_FACE('',(#369829),#369854,.T.); +#369829 = FACE_BOUND('',#369830,.T.); +#369830 = EDGE_LOOP('',(#369831,#369832,#369840,#369848)); +#369831 = ORIENTED_EDGE('',*,*,#369810,.T.); +#369832 = ORIENTED_EDGE('',*,*,#369833,.T.); +#369833 = EDGE_CURVE('',#369803,#369834,#369836,.T.); +#369834 = VERTEX_POINT('',#369835); +#369835 = CARTESIAN_POINT('',(130.,-73.09,1.55)); +#369836 = LINE('',#369837,#369838); +#369837 = CARTESIAN_POINT('',(128.5,-73.09,1.55)); +#369838 = VECTOR('',#369839,1.); +#369839 = DIRECTION('',(1.,0.,0.)); +#369840 = ORIENTED_EDGE('',*,*,#369841,.F.); +#369841 = EDGE_CURVE('',#369842,#369834,#369844,.T.); +#369842 = VERTEX_POINT('',#369843); +#369843 = CARTESIAN_POINT('',(130.,-73.09,1.51)); +#369844 = LINE('',#369845,#369846); +#369845 = CARTESIAN_POINT('',(130.,-73.09,1.51)); +#369846 = VECTOR('',#369847,1.); +#369847 = DIRECTION('',(0.,0.,1.)); +#369848 = ORIENTED_EDGE('',*,*,#369849,.F.); +#369849 = EDGE_CURVE('',#369811,#369842,#369850,.T.); +#369850 = LINE('',#369851,#369852); +#369851 = CARTESIAN_POINT('',(128.5,-73.09,1.51)); +#369852 = VECTOR('',#369853,1.); +#369853 = DIRECTION('',(1.,0.,0.)); +#369854 = PLANE('',#369855); +#369855 = AXIS2_PLACEMENT_3D('',#369856,#369857,#369858); +#369856 = CARTESIAN_POINT('',(128.5,-73.09,1.51)); +#369857 = DIRECTION('',(0.,1.,0.)); +#369858 = DIRECTION('',(1.,0.,0.)); +#369859 = ADVANCED_FACE('',(#369860),#369885,.T.); +#369860 = FACE_BOUND('',#369861,.T.); +#369861 = EDGE_LOOP('',(#369862,#369863,#369871,#369879)); +#369862 = ORIENTED_EDGE('',*,*,#369841,.T.); +#369863 = ORIENTED_EDGE('',*,*,#369864,.T.); +#369864 = EDGE_CURVE('',#369834,#369865,#369867,.T.); +#369865 = VERTEX_POINT('',#369866); +#369866 = CARTESIAN_POINT('',(130.,-73.99,1.55)); +#369867 = LINE('',#369868,#369869); +#369868 = CARTESIAN_POINT('',(130.,-73.09,1.55)); +#369869 = VECTOR('',#369870,1.); +#369870 = DIRECTION('',(0.,-1.,0.)); +#369871 = ORIENTED_EDGE('',*,*,#369872,.F.); +#369872 = EDGE_CURVE('',#369873,#369865,#369875,.T.); +#369873 = VERTEX_POINT('',#369874); +#369874 = CARTESIAN_POINT('',(130.,-73.99,1.51)); +#369875 = LINE('',#369876,#369877); +#369876 = CARTESIAN_POINT('',(130.,-73.99,1.51)); +#369877 = VECTOR('',#369878,1.); +#369878 = DIRECTION('',(0.,0.,1.)); +#369879 = ORIENTED_EDGE('',*,*,#369880,.F.); +#369880 = EDGE_CURVE('',#369842,#369873,#369881,.T.); +#369881 = LINE('',#369882,#369883); +#369882 = CARTESIAN_POINT('',(130.,-73.09,1.51)); +#369883 = VECTOR('',#369884,1.); +#369884 = DIRECTION('',(0.,-1.,0.)); +#369885 = PLANE('',#369886); +#369886 = AXIS2_PLACEMENT_3D('',#369887,#369888,#369889); +#369887 = CARTESIAN_POINT('',(130.,-73.09,1.51)); +#369888 = DIRECTION('',(1.,0.,-0.)); +#369889 = DIRECTION('',(0.,-1.,0.)); +#369890 = ADVANCED_FACE('',(#369891),#369907,.T.); +#369891 = FACE_BOUND('',#369892,.T.); +#369892 = EDGE_LOOP('',(#369893,#369894,#369900,#369901)); +#369893 = ORIENTED_EDGE('',*,*,#369872,.T.); +#369894 = ORIENTED_EDGE('',*,*,#369895,.T.); +#369895 = EDGE_CURVE('',#369865,#369795,#369896,.T.); +#369896 = LINE('',#369897,#369898); +#369897 = CARTESIAN_POINT('',(130.,-73.99,1.55)); +#369898 = VECTOR('',#369899,1.); +#369899 = DIRECTION('',(-1.,0.,0.)); +#369900 = ORIENTED_EDGE('',*,*,#369792,.F.); +#369901 = ORIENTED_EDGE('',*,*,#369902,.F.); +#369902 = EDGE_CURVE('',#369873,#369793,#369903,.T.); +#369903 = LINE('',#369904,#369905); +#369904 = CARTESIAN_POINT('',(130.,-73.99,1.51)); +#369905 = VECTOR('',#369906,1.); +#369906 = DIRECTION('',(-1.,0.,0.)); +#369907 = PLANE('',#369908); +#369908 = AXIS2_PLACEMENT_3D('',#369909,#369910,#369911); +#369909 = CARTESIAN_POINT('',(130.,-73.99,1.51)); +#369910 = DIRECTION('',(0.,-1.,0.)); +#369911 = DIRECTION('',(-1.,0.,0.)); +#369912 = ADVANCED_FACE('',(#369913),#369919,.F.); +#369913 = FACE_BOUND('',#369914,.T.); +#369914 = EDGE_LOOP('',(#369915,#369916,#369917,#369918)); +#369915 = ORIENTED_EDGE('',*,*,#369818,.T.); +#369916 = ORIENTED_EDGE('',*,*,#369849,.T.); +#369917 = ORIENTED_EDGE('',*,*,#369880,.T.); +#369918 = ORIENTED_EDGE('',*,*,#369902,.T.); +#369919 = PLANE('',#369920); +#369920 = AXIS2_PLACEMENT_3D('',#369921,#369922,#369923); +#369921 = CARTESIAN_POINT('',(0.,0.,1.51)); +#369922 = DIRECTION('',(0.,0.,1.)); +#369923 = DIRECTION('',(1.,0.,-0.)); +#369924 = ADVANCED_FACE('',(#369925),#369931,.T.); +#369925 = FACE_BOUND('',#369926,.F.); +#369926 = EDGE_LOOP('',(#369927,#369928,#369929,#369930)); +#369927 = ORIENTED_EDGE('',*,*,#369802,.T.); +#369928 = ORIENTED_EDGE('',*,*,#369833,.T.); +#369929 = ORIENTED_EDGE('',*,*,#369864,.T.); +#369930 = ORIENTED_EDGE('',*,*,#369895,.T.); +#369931 = PLANE('',#369932); +#369932 = AXIS2_PLACEMENT_3D('',#369933,#369934,#369935); +#369933 = CARTESIAN_POINT('',(0.,0.,1.55)); +#369934 = DIRECTION('',(0.,0.,1.)); +#369935 = DIRECTION('',(1.,0.,-0.)); +#369936 = MANIFOLD_SOLID_BREP('',#369937); +#369937 = CLOSED_SHELL('',(#369938,#369980,#370011,#370044,#370075, + #370108,#370139,#370172,#370194,#370210)); +#369938 = ADVANCED_FACE('',(#369939),#369975,.T.); +#369939 = FACE_BOUND('',#369940,.T.); +#369940 = EDGE_LOOP('',(#369941,#369951,#369960,#369968)); +#369941 = ORIENTED_EDGE('',*,*,#369942,.T.); +#369942 = EDGE_CURVE('',#369943,#369945,#369947,.T.); +#369943 = VERTEX_POINT('',#369944); +#369944 = CARTESIAN_POINT('',(139.28,-147.665,1.51)); +#369945 = VERTEX_POINT('',#369946); +#369946 = CARTESIAN_POINT('',(139.28,-147.665,1.55)); +#369947 = LINE('',#369948,#369949); +#369948 = CARTESIAN_POINT('',(139.28,-147.665,1.51)); +#369949 = VECTOR('',#369950,1.); +#369950 = DIRECTION('',(0.,0.,1.)); +#369951 = ORIENTED_EDGE('',*,*,#369952,.T.); +#369952 = EDGE_CURVE('',#369945,#369953,#369955,.T.); +#369953 = VERTEX_POINT('',#369954); +#369954 = CARTESIAN_POINT('',(139.415,-147.53,1.55)); +#369955 = CIRCLE('',#369956,0.135001418495); +#369956 = AXIS2_PLACEMENT_3D('',#369957,#369958,#369959); +#369957 = CARTESIAN_POINT('',(139.41500141848,-147.6650014184,1.55)); +#369958 = DIRECTION('',(0.,0.,-1.)); +#369959 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369960 = ORIENTED_EDGE('',*,*,#369961,.F.); +#369961 = EDGE_CURVE('',#369962,#369953,#369964,.T.); +#369962 = VERTEX_POINT('',#369963); +#369963 = CARTESIAN_POINT('',(139.415,-147.53,1.51)); +#369964 = LINE('',#369965,#369966); +#369965 = CARTESIAN_POINT('',(139.415,-147.53,1.51)); +#369966 = VECTOR('',#369967,1.); +#369967 = DIRECTION('',(0.,0.,1.)); +#369968 = ORIENTED_EDGE('',*,*,#369969,.F.); +#369969 = EDGE_CURVE('',#369943,#369962,#369970,.T.); +#369970 = CIRCLE('',#369971,0.135001418495); +#369971 = AXIS2_PLACEMENT_3D('',#369972,#369973,#369974); +#369972 = CARTESIAN_POINT('',(139.41500141848,-147.6650014184,1.51)); +#369973 = DIRECTION('',(0.,0.,-1.)); +#369974 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369975 = CYLINDRICAL_SURFACE('',#369976,0.135001418495); +#369976 = AXIS2_PLACEMENT_3D('',#369977,#369978,#369979); +#369977 = CARTESIAN_POINT('',(139.41500141848,-147.6650014184,1.51)); +#369978 = DIRECTION('',(0.,0.,-1.)); +#369979 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#369980 = ADVANCED_FACE('',(#369981),#370006,.T.); +#369981 = FACE_BOUND('',#369982,.T.); +#369982 = EDGE_LOOP('',(#369983,#369984,#369992,#370000)); +#369983 = ORIENTED_EDGE('',*,*,#369961,.T.); +#369984 = ORIENTED_EDGE('',*,*,#369985,.T.); +#369985 = EDGE_CURVE('',#369953,#369986,#369988,.T.); +#369986 = VERTEX_POINT('',#369987); +#369987 = CARTESIAN_POINT('',(139.785,-147.53,1.55)); +#369988 = LINE('',#369989,#369990); +#369989 = CARTESIAN_POINT('',(139.415,-147.53,1.55)); +#369990 = VECTOR('',#369991,1.); +#369991 = DIRECTION('',(1.,0.,0.)); +#369992 = ORIENTED_EDGE('',*,*,#369993,.F.); +#369993 = EDGE_CURVE('',#369994,#369986,#369996,.T.); +#369994 = VERTEX_POINT('',#369995); +#369995 = CARTESIAN_POINT('',(139.785,-147.53,1.51)); +#369996 = LINE('',#369997,#369998); +#369997 = CARTESIAN_POINT('',(139.785,-147.53,1.51)); +#369998 = VECTOR('',#369999,1.); +#369999 = DIRECTION('',(0.,0.,1.)); +#370000 = ORIENTED_EDGE('',*,*,#370001,.F.); +#370001 = EDGE_CURVE('',#369962,#369994,#370002,.T.); +#370002 = LINE('',#370003,#370004); +#370003 = CARTESIAN_POINT('',(139.415,-147.53,1.51)); +#370004 = VECTOR('',#370005,1.); +#370005 = DIRECTION('',(1.,0.,0.)); +#370006 = PLANE('',#370007); +#370007 = AXIS2_PLACEMENT_3D('',#370008,#370009,#370010); +#370008 = CARTESIAN_POINT('',(139.415,-147.53,1.51)); +#370009 = DIRECTION('',(0.,1.,0.)); +#370010 = DIRECTION('',(1.,0.,0.)); +#370011 = ADVANCED_FACE('',(#370012),#370039,.T.); +#370012 = FACE_BOUND('',#370013,.T.); +#370013 = EDGE_LOOP('',(#370014,#370015,#370024,#370032)); +#370014 = ORIENTED_EDGE('',*,*,#369993,.T.); +#370015 = ORIENTED_EDGE('',*,*,#370016,.T.); +#370016 = EDGE_CURVE('',#369986,#370017,#370019,.T.); +#370017 = VERTEX_POINT('',#370018); +#370018 = CARTESIAN_POINT('',(139.92,-147.665,1.55)); +#370019 = CIRCLE('',#370020,0.135001418495); +#370020 = AXIS2_PLACEMENT_3D('',#370021,#370022,#370023); +#370021 = CARTESIAN_POINT('',(139.78499858151,-147.6650014184,1.55)); +#370022 = DIRECTION('',(0.,0.,-1.)); +#370023 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#370024 = ORIENTED_EDGE('',*,*,#370025,.F.); +#370025 = EDGE_CURVE('',#370026,#370017,#370028,.T.); +#370026 = VERTEX_POINT('',#370027); +#370027 = CARTESIAN_POINT('',(139.92,-147.665,1.51)); +#370028 = LINE('',#370029,#370030); +#370029 = CARTESIAN_POINT('',(139.92,-147.665,1.51)); +#370030 = VECTOR('',#370031,1.); +#370031 = DIRECTION('',(0.,0.,1.)); +#370032 = ORIENTED_EDGE('',*,*,#370033,.F.); +#370033 = EDGE_CURVE('',#369994,#370026,#370034,.T.); +#370034 = CIRCLE('',#370035,0.135001418495); +#370035 = AXIS2_PLACEMENT_3D('',#370036,#370037,#370038); +#370036 = CARTESIAN_POINT('',(139.78499858151,-147.6650014184,1.51)); +#370037 = DIRECTION('',(0.,0.,-1.)); +#370038 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#370039 = CYLINDRICAL_SURFACE('',#370040,0.135001418495); +#370040 = AXIS2_PLACEMENT_3D('',#370041,#370042,#370043); +#370041 = CARTESIAN_POINT('',(139.78499858151,-147.6650014184,1.51)); +#370042 = DIRECTION('',(0.,0.,-1.)); +#370043 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#370044 = ADVANCED_FACE('',(#370045),#370070,.T.); +#370045 = FACE_BOUND('',#370046,.T.); +#370046 = EDGE_LOOP('',(#370047,#370048,#370056,#370064)); +#370047 = ORIENTED_EDGE('',*,*,#370025,.T.); +#370048 = ORIENTED_EDGE('',*,*,#370049,.T.); +#370049 = EDGE_CURVE('',#370017,#370050,#370052,.T.); +#370050 = VERTEX_POINT('',#370051); +#370051 = CARTESIAN_POINT('',(139.92,-147.935,1.55)); +#370052 = LINE('',#370053,#370054); +#370053 = CARTESIAN_POINT('',(139.92,-147.665,1.55)); +#370054 = VECTOR('',#370055,1.); +#370055 = DIRECTION('',(0.,-1.,0.)); +#370056 = ORIENTED_EDGE('',*,*,#370057,.F.); +#370057 = EDGE_CURVE('',#370058,#370050,#370060,.T.); +#370058 = VERTEX_POINT('',#370059); +#370059 = CARTESIAN_POINT('',(139.92,-147.935,1.51)); +#370060 = LINE('',#370061,#370062); +#370061 = CARTESIAN_POINT('',(139.92,-147.935,1.51)); +#370062 = VECTOR('',#370063,1.); +#370063 = DIRECTION('',(0.,0.,1.)); +#370064 = ORIENTED_EDGE('',*,*,#370065,.F.); +#370065 = EDGE_CURVE('',#370026,#370058,#370066,.T.); +#370066 = LINE('',#370067,#370068); +#370067 = CARTESIAN_POINT('',(139.92,-147.665,1.51)); +#370068 = VECTOR('',#370069,1.); +#370069 = DIRECTION('',(0.,-1.,0.)); +#370070 = PLANE('',#370071); +#370071 = AXIS2_PLACEMENT_3D('',#370072,#370073,#370074); +#370072 = CARTESIAN_POINT('',(139.92,-147.665,1.51)); +#370073 = DIRECTION('',(1.,0.,-0.)); +#370074 = DIRECTION('',(0.,-1.,0.)); +#370075 = ADVANCED_FACE('',(#370076),#370103,.T.); +#370076 = FACE_BOUND('',#370077,.T.); +#370077 = EDGE_LOOP('',(#370078,#370079,#370088,#370096)); +#370078 = ORIENTED_EDGE('',*,*,#370057,.T.); +#370079 = ORIENTED_EDGE('',*,*,#370080,.T.); +#370080 = EDGE_CURVE('',#370050,#370081,#370083,.T.); +#370081 = VERTEX_POINT('',#370082); +#370082 = CARTESIAN_POINT('',(139.785,-148.07,1.55)); +#370083 = CIRCLE('',#370084,0.135001418495); +#370084 = AXIS2_PLACEMENT_3D('',#370085,#370086,#370087); +#370085 = CARTESIAN_POINT('',(139.78499858151,-147.9349985815,1.55)); +#370086 = DIRECTION('',(0.,0.,-1.)); +#370087 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#370088 = ORIENTED_EDGE('',*,*,#370089,.F.); +#370089 = EDGE_CURVE('',#370090,#370081,#370092,.T.); +#370090 = VERTEX_POINT('',#370091); +#370091 = CARTESIAN_POINT('',(139.785,-148.07,1.51)); +#370092 = LINE('',#370093,#370094); +#370093 = CARTESIAN_POINT('',(139.785,-148.07,1.51)); +#370094 = VECTOR('',#370095,1.); +#370095 = DIRECTION('',(0.,0.,1.)); +#370096 = ORIENTED_EDGE('',*,*,#370097,.F.); +#370097 = EDGE_CURVE('',#370058,#370090,#370098,.T.); +#370098 = CIRCLE('',#370099,0.135001418495); +#370099 = AXIS2_PLACEMENT_3D('',#370100,#370101,#370102); +#370100 = CARTESIAN_POINT('',(139.78499858151,-147.9349985815,1.51)); +#370101 = DIRECTION('',(0.,0.,-1.)); +#370102 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#370103 = CYLINDRICAL_SURFACE('',#370104,0.135001418495); +#370104 = AXIS2_PLACEMENT_3D('',#370105,#370106,#370107); +#370105 = CARTESIAN_POINT('',(139.78499858151,-147.9349985815,1.51)); +#370106 = DIRECTION('',(0.,0.,-1.)); +#370107 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#370108 = ADVANCED_FACE('',(#370109),#370134,.T.); +#370109 = FACE_BOUND('',#370110,.T.); +#370110 = EDGE_LOOP('',(#370111,#370112,#370120,#370128)); +#370111 = ORIENTED_EDGE('',*,*,#370089,.T.); +#370112 = ORIENTED_EDGE('',*,*,#370113,.T.); +#370113 = EDGE_CURVE('',#370081,#370114,#370116,.T.); +#370114 = VERTEX_POINT('',#370115); +#370115 = CARTESIAN_POINT('',(139.415,-148.07,1.55)); +#370116 = LINE('',#370117,#370118); +#370117 = CARTESIAN_POINT('',(139.785,-148.07,1.55)); +#370118 = VECTOR('',#370119,1.); +#370119 = DIRECTION('',(-1.,0.,0.)); +#370120 = ORIENTED_EDGE('',*,*,#370121,.F.); +#370121 = EDGE_CURVE('',#370122,#370114,#370124,.T.); +#370122 = VERTEX_POINT('',#370123); +#370123 = CARTESIAN_POINT('',(139.415,-148.07,1.51)); +#370124 = LINE('',#370125,#370126); +#370125 = CARTESIAN_POINT('',(139.415,-148.07,1.51)); +#370126 = VECTOR('',#370127,1.); +#370127 = DIRECTION('',(0.,0.,1.)); +#370128 = ORIENTED_EDGE('',*,*,#370129,.F.); +#370129 = EDGE_CURVE('',#370090,#370122,#370130,.T.); +#370130 = LINE('',#370131,#370132); +#370131 = CARTESIAN_POINT('',(139.785,-148.07,1.51)); +#370132 = VECTOR('',#370133,1.); +#370133 = DIRECTION('',(-1.,0.,0.)); +#370134 = PLANE('',#370135); +#370135 = AXIS2_PLACEMENT_3D('',#370136,#370137,#370138); +#370136 = CARTESIAN_POINT('',(139.785,-148.07,1.51)); +#370137 = DIRECTION('',(0.,-1.,0.)); +#370138 = DIRECTION('',(-1.,0.,0.)); +#370139 = ADVANCED_FACE('',(#370140),#370167,.T.); +#370140 = FACE_BOUND('',#370141,.T.); +#370141 = EDGE_LOOP('',(#370142,#370143,#370152,#370160)); +#370142 = ORIENTED_EDGE('',*,*,#370121,.T.); +#370143 = ORIENTED_EDGE('',*,*,#370144,.T.); +#370144 = EDGE_CURVE('',#370114,#370145,#370147,.T.); +#370145 = VERTEX_POINT('',#370146); +#370146 = CARTESIAN_POINT('',(139.28,-147.935,1.55)); +#370147 = CIRCLE('',#370148,0.135001418495); +#370148 = AXIS2_PLACEMENT_3D('',#370149,#370150,#370151); +#370149 = CARTESIAN_POINT('',(139.41500141848,-147.9349985815,1.55)); +#370150 = DIRECTION('',(0.,0.,-1.)); +#370151 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370152 = ORIENTED_EDGE('',*,*,#370153,.F.); +#370153 = EDGE_CURVE('',#370154,#370145,#370156,.T.); +#370154 = VERTEX_POINT('',#370155); +#370155 = CARTESIAN_POINT('',(139.28,-147.935,1.51)); +#370156 = LINE('',#370157,#370158); +#370157 = CARTESIAN_POINT('',(139.28,-147.935,1.51)); +#370158 = VECTOR('',#370159,1.); +#370159 = DIRECTION('',(0.,0.,1.)); +#370160 = ORIENTED_EDGE('',*,*,#370161,.F.); +#370161 = EDGE_CURVE('',#370122,#370154,#370162,.T.); +#370162 = CIRCLE('',#370163,0.135001418495); +#370163 = AXIS2_PLACEMENT_3D('',#370164,#370165,#370166); +#370164 = CARTESIAN_POINT('',(139.41500141848,-147.9349985815,1.51)); +#370165 = DIRECTION('',(0.,0.,-1.)); +#370166 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370167 = CYLINDRICAL_SURFACE('',#370168,0.135001418495); +#370168 = AXIS2_PLACEMENT_3D('',#370169,#370170,#370171); +#370169 = CARTESIAN_POINT('',(139.41500141848,-147.9349985815,1.51)); +#370170 = DIRECTION('',(0.,0.,-1.)); +#370171 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370172 = ADVANCED_FACE('',(#370173),#370189,.T.); +#370173 = FACE_BOUND('',#370174,.T.); +#370174 = EDGE_LOOP('',(#370175,#370176,#370182,#370183)); +#370175 = ORIENTED_EDGE('',*,*,#370153,.T.); +#370176 = ORIENTED_EDGE('',*,*,#370177,.T.); +#370177 = EDGE_CURVE('',#370145,#369945,#370178,.T.); +#370178 = LINE('',#370179,#370180); +#370179 = CARTESIAN_POINT('',(139.28,-147.935,1.55)); +#370180 = VECTOR('',#370181,1.); +#370181 = DIRECTION('',(0.,1.,0.)); +#370182 = ORIENTED_EDGE('',*,*,#369942,.F.); +#370183 = ORIENTED_EDGE('',*,*,#370184,.F.); +#370184 = EDGE_CURVE('',#370154,#369943,#370185,.T.); +#370185 = LINE('',#370186,#370187); +#370186 = CARTESIAN_POINT('',(139.28,-147.935,1.51)); +#370187 = VECTOR('',#370188,1.); +#370188 = DIRECTION('',(0.,1.,0.)); +#370189 = PLANE('',#370190); +#370190 = AXIS2_PLACEMENT_3D('',#370191,#370192,#370193); +#370191 = CARTESIAN_POINT('',(139.28,-147.935,1.51)); +#370192 = DIRECTION('',(-1.,0.,0.)); +#370193 = DIRECTION('',(0.,1.,0.)); +#370194 = ADVANCED_FACE('',(#370195),#370205,.F.); +#370195 = FACE_BOUND('',#370196,.T.); +#370196 = EDGE_LOOP('',(#370197,#370198,#370199,#370200,#370201,#370202, + #370203,#370204)); +#370197 = ORIENTED_EDGE('',*,*,#369969,.T.); +#370198 = ORIENTED_EDGE('',*,*,#370001,.T.); +#370199 = ORIENTED_EDGE('',*,*,#370033,.T.); +#370200 = ORIENTED_EDGE('',*,*,#370065,.T.); +#370201 = ORIENTED_EDGE('',*,*,#370097,.T.); +#370202 = ORIENTED_EDGE('',*,*,#370129,.T.); +#370203 = ORIENTED_EDGE('',*,*,#370161,.T.); +#370204 = ORIENTED_EDGE('',*,*,#370184,.T.); +#370205 = PLANE('',#370206); +#370206 = AXIS2_PLACEMENT_3D('',#370207,#370208,#370209); +#370207 = CARTESIAN_POINT('',(0.,0.,1.51)); +#370208 = DIRECTION('',(0.,0.,1.)); +#370209 = DIRECTION('',(1.,0.,-0.)); +#370210 = ADVANCED_FACE('',(#370211),#370221,.T.); +#370211 = FACE_BOUND('',#370212,.F.); +#370212 = EDGE_LOOP('',(#370213,#370214,#370215,#370216,#370217,#370218, + #370219,#370220)); +#370213 = ORIENTED_EDGE('',*,*,#369952,.T.); +#370214 = ORIENTED_EDGE('',*,*,#369985,.T.); +#370215 = ORIENTED_EDGE('',*,*,#370016,.T.); +#370216 = ORIENTED_EDGE('',*,*,#370049,.T.); +#370217 = ORIENTED_EDGE('',*,*,#370080,.T.); +#370218 = ORIENTED_EDGE('',*,*,#370113,.T.); +#370219 = ORIENTED_EDGE('',*,*,#370144,.T.); +#370220 = ORIENTED_EDGE('',*,*,#370177,.T.); +#370221 = PLANE('',#370222); +#370222 = AXIS2_PLACEMENT_3D('',#370223,#370224,#370225); +#370223 = CARTESIAN_POINT('',(0.,0.,1.55)); +#370224 = DIRECTION('',(0.,0.,1.)); +#370225 = DIRECTION('',(1.,0.,-0.)); +#370226 = MANIFOLD_SOLID_BREP('',#370227); +#370227 = CLOSED_SHELL('',(#370228,#370261,#370281,#370301)); +#370228 = ADVANCED_FACE('',(#370229),#370256,.T.); +#370229 = FACE_BOUND('',#370230,.F.); +#370230 = EDGE_LOOP('',(#370231,#370241,#370248,#370249)); +#370231 = ORIENTED_EDGE('',*,*,#370232,.T.); +#370232 = EDGE_CURVE('',#370233,#370235,#370237,.T.); +#370233 = VERTEX_POINT('',#370234); +#370234 = CARTESIAN_POINT('',(142.7155,-127.5,1.51)); +#370235 = VERTEX_POINT('',#370236); +#370236 = CARTESIAN_POINT('',(142.7155,-127.5,1.55)); +#370237 = LINE('',#370238,#370239); +#370238 = CARTESIAN_POINT('',(142.7155,-127.5,1.51)); +#370239 = VECTOR('',#370240,1.); +#370240 = DIRECTION('',(0.,0.,1.)); +#370241 = ORIENTED_EDGE('',*,*,#370242,.T.); +#370242 = EDGE_CURVE('',#370235,#370235,#370243,.T.); +#370243 = CIRCLE('',#370244,0.7155); +#370244 = AXIS2_PLACEMENT_3D('',#370245,#370246,#370247); +#370245 = CARTESIAN_POINT('',(142.,-127.5,1.55)); +#370246 = DIRECTION('',(0.,0.,1.)); +#370247 = DIRECTION('',(1.,0.,-0.)); +#370248 = ORIENTED_EDGE('',*,*,#370232,.F.); +#370249 = ORIENTED_EDGE('',*,*,#370250,.F.); +#370250 = EDGE_CURVE('',#370233,#370233,#370251,.T.); +#370251 = CIRCLE('',#370252,0.7155); +#370252 = AXIS2_PLACEMENT_3D('',#370253,#370254,#370255); +#370253 = CARTESIAN_POINT('',(142.,-127.5,1.51)); +#370254 = DIRECTION('',(0.,0.,1.)); +#370255 = DIRECTION('',(1.,0.,-0.)); +#370256 = CYLINDRICAL_SURFACE('',#370257,0.7155); +#370257 = AXIS2_PLACEMENT_3D('',#370258,#370259,#370260); +#370258 = CARTESIAN_POINT('',(142.,-127.5,1.51)); +#370259 = DIRECTION('',(-0.,-0.,-1.)); +#370260 = DIRECTION('',(1.,0.,-0.)); +#370261 = ADVANCED_FACE('',(#370262,#370265),#370276,.F.); +#370262 = FACE_BOUND('',#370263,.F.); +#370263 = EDGE_LOOP('',(#370264)); +#370264 = ORIENTED_EDGE('',*,*,#370250,.T.); +#370265 = FACE_BOUND('',#370266,.F.); +#370266 = EDGE_LOOP('',(#370267)); +#370267 = ORIENTED_EDGE('',*,*,#370268,.T.); +#370268 = EDGE_CURVE('',#370269,#370269,#370271,.T.); +#370269 = VERTEX_POINT('',#370270); +#370270 = CARTESIAN_POINT('',(142.,-127.935,1.51)); +#370271 = CIRCLE('',#370272,0.435); +#370272 = AXIS2_PLACEMENT_3D('',#370273,#370274,#370275); +#370273 = CARTESIAN_POINT('',(142.,-127.5,1.51)); +#370274 = DIRECTION('',(-0.,0.,-1.)); +#370275 = DIRECTION('',(-0.,-1.,0.)); +#370276 = PLANE('',#370277); +#370277 = AXIS2_PLACEMENT_3D('',#370278,#370279,#370280); +#370278 = CARTESIAN_POINT('',(0.,0.,1.51)); +#370279 = DIRECTION('',(0.,0.,1.)); +#370280 = DIRECTION('',(1.,0.,-0.)); +#370281 = ADVANCED_FACE('',(#370282,#370285),#370296,.T.); +#370282 = FACE_BOUND('',#370283,.T.); +#370283 = EDGE_LOOP('',(#370284)); +#370284 = ORIENTED_EDGE('',*,*,#370242,.T.); +#370285 = FACE_BOUND('',#370286,.T.); +#370286 = EDGE_LOOP('',(#370287)); +#370287 = ORIENTED_EDGE('',*,*,#370288,.T.); +#370288 = EDGE_CURVE('',#370289,#370289,#370291,.T.); +#370289 = VERTEX_POINT('',#370290); +#370290 = CARTESIAN_POINT('',(142.,-127.935,1.55)); +#370291 = CIRCLE('',#370292,0.435); +#370292 = AXIS2_PLACEMENT_3D('',#370293,#370294,#370295); +#370293 = CARTESIAN_POINT('',(142.,-127.5,1.55)); +#370294 = DIRECTION('',(-0.,0.,-1.)); +#370295 = DIRECTION('',(-0.,-1.,0.)); +#370296 = PLANE('',#370297); +#370297 = AXIS2_PLACEMENT_3D('',#370298,#370299,#370300); +#370298 = CARTESIAN_POINT('',(0.,0.,1.55)); +#370299 = DIRECTION('',(0.,0.,1.)); +#370300 = DIRECTION('',(1.,0.,-0.)); +#370301 = ADVANCED_FACE('',(#370302),#370313,.F.); +#370302 = FACE_BOUND('',#370303,.T.); +#370303 = EDGE_LOOP('',(#370304,#370305,#370311,#370312)); +#370304 = ORIENTED_EDGE('',*,*,#370268,.T.); +#370305 = ORIENTED_EDGE('',*,*,#370306,.T.); +#370306 = EDGE_CURVE('',#370269,#370289,#370307,.T.); +#370307 = LINE('',#370308,#370309); +#370308 = CARTESIAN_POINT('',(142.,-127.935,-4.6E-02)); +#370309 = VECTOR('',#370310,1.); +#370310 = DIRECTION('',(0.,0.,1.)); +#370311 = ORIENTED_EDGE('',*,*,#370288,.F.); +#370312 = ORIENTED_EDGE('',*,*,#370306,.F.); +#370313 = CYLINDRICAL_SURFACE('',#370314,0.435); +#370314 = AXIS2_PLACEMENT_3D('',#370315,#370316,#370317); +#370315 = CARTESIAN_POINT('',(142.,-127.5,-4.6E-02)); +#370316 = DIRECTION('',(-0.,-0.,-1.)); +#370317 = DIRECTION('',(-0.,-1.,0.)); +#370318 = MANIFOLD_SOLID_BREP('',#370319); +#370319 = CLOSED_SHELL('',(#370320,#370353,#370373,#370393)); +#370320 = ADVANCED_FACE('',(#370321),#370348,.T.); +#370321 = FACE_BOUND('',#370322,.T.); +#370322 = EDGE_LOOP('',(#370323,#370333,#370340,#370341)); +#370323 = ORIENTED_EDGE('',*,*,#370324,.T.); +#370324 = EDGE_CURVE('',#370325,#370327,#370329,.T.); +#370325 = VERTEX_POINT('',#370326); +#370326 = CARTESIAN_POINT('',(142.7155,-127.5,0.)); +#370327 = VERTEX_POINT('',#370328); +#370328 = CARTESIAN_POINT('',(142.7155,-127.5,-4.E-02)); +#370329 = LINE('',#370330,#370331); +#370330 = CARTESIAN_POINT('',(142.7155,-127.5,0.)); +#370331 = VECTOR('',#370332,1.); +#370332 = DIRECTION('',(0.,0.,-1.)); +#370333 = ORIENTED_EDGE('',*,*,#370334,.T.); +#370334 = EDGE_CURVE('',#370327,#370327,#370335,.T.); +#370335 = CIRCLE('',#370336,0.7155); +#370336 = AXIS2_PLACEMENT_3D('',#370337,#370338,#370339); +#370337 = CARTESIAN_POINT('',(142.,-127.5,-4.E-02)); +#370338 = DIRECTION('',(0.,0.,1.)); +#370339 = DIRECTION('',(1.,0.,-0.)); +#370340 = ORIENTED_EDGE('',*,*,#370324,.F.); +#370341 = ORIENTED_EDGE('',*,*,#370342,.F.); +#370342 = EDGE_CURVE('',#370325,#370325,#370343,.T.); +#370343 = CIRCLE('',#370344,0.7155); +#370344 = AXIS2_PLACEMENT_3D('',#370345,#370346,#370347); +#370345 = CARTESIAN_POINT('',(142.,-127.5,0.)); +#370346 = DIRECTION('',(0.,0.,1.)); +#370347 = DIRECTION('',(1.,0.,-0.)); +#370348 = CYLINDRICAL_SURFACE('',#370349,0.7155); +#370349 = AXIS2_PLACEMENT_3D('',#370350,#370351,#370352); +#370350 = CARTESIAN_POINT('',(142.,-127.5,0.)); +#370351 = DIRECTION('',(0.,0.,1.)); +#370352 = DIRECTION('',(1.,0.,-0.)); +#370353 = ADVANCED_FACE('',(#370354,#370357),#370368,.F.); +#370354 = FACE_BOUND('',#370355,.F.); +#370355 = EDGE_LOOP('',(#370356)); +#370356 = ORIENTED_EDGE('',*,*,#370342,.F.); +#370357 = FACE_BOUND('',#370358,.F.); +#370358 = EDGE_LOOP('',(#370359)); +#370359 = ORIENTED_EDGE('',*,*,#370360,.F.); +#370360 = EDGE_CURVE('',#370361,#370361,#370363,.T.); +#370361 = VERTEX_POINT('',#370362); +#370362 = CARTESIAN_POINT('',(142.,-127.935,0.)); +#370363 = CIRCLE('',#370364,0.435); +#370364 = AXIS2_PLACEMENT_3D('',#370365,#370366,#370367); +#370365 = CARTESIAN_POINT('',(142.,-127.5,0.)); +#370366 = DIRECTION('',(-0.,0.,-1.)); +#370367 = DIRECTION('',(-0.,-1.,0.)); +#370368 = PLANE('',#370369); +#370369 = AXIS2_PLACEMENT_3D('',#370370,#370371,#370372); +#370370 = CARTESIAN_POINT('',(0.,0.,0.)); +#370371 = DIRECTION('',(-0.,-0.,-1.)); +#370372 = DIRECTION('',(-1.,0.,0.)); +#370373 = ADVANCED_FACE('',(#370374,#370377),#370388,.T.); +#370374 = FACE_BOUND('',#370375,.T.); +#370375 = EDGE_LOOP('',(#370376)); +#370376 = ORIENTED_EDGE('',*,*,#370334,.F.); +#370377 = FACE_BOUND('',#370378,.T.); +#370378 = EDGE_LOOP('',(#370379)); +#370379 = ORIENTED_EDGE('',*,*,#370380,.F.); +#370380 = EDGE_CURVE('',#370381,#370381,#370383,.T.); +#370381 = VERTEX_POINT('',#370382); +#370382 = CARTESIAN_POINT('',(142.,-127.935,-4.E-02)); +#370383 = CIRCLE('',#370384,0.435); +#370384 = AXIS2_PLACEMENT_3D('',#370385,#370386,#370387); +#370385 = CARTESIAN_POINT('',(142.,-127.5,-4.E-02)); +#370386 = DIRECTION('',(-0.,0.,-1.)); +#370387 = DIRECTION('',(-0.,-1.,0.)); +#370388 = PLANE('',#370389); +#370389 = AXIS2_PLACEMENT_3D('',#370390,#370391,#370392); +#370390 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#370391 = DIRECTION('',(-0.,-0.,-1.)); +#370392 = DIRECTION('',(-1.,0.,0.)); +#370393 = ADVANCED_FACE('',(#370394),#370405,.F.); +#370394 = FACE_BOUND('',#370395,.T.); +#370395 = EDGE_LOOP('',(#370396,#370397,#370403,#370404)); +#370396 = ORIENTED_EDGE('',*,*,#370380,.T.); +#370397 = ORIENTED_EDGE('',*,*,#370398,.T.); +#370398 = EDGE_CURVE('',#370381,#370361,#370399,.T.); +#370399 = LINE('',#370400,#370401); +#370400 = CARTESIAN_POINT('',(142.,-127.935,-4.6E-02)); +#370401 = VECTOR('',#370402,1.); +#370402 = DIRECTION('',(0.,0.,1.)); +#370403 = ORIENTED_EDGE('',*,*,#370360,.F.); +#370404 = ORIENTED_EDGE('',*,*,#370398,.F.); +#370405 = CYLINDRICAL_SURFACE('',#370406,0.435); +#370406 = AXIS2_PLACEMENT_3D('',#370407,#370408,#370409); +#370407 = CARTESIAN_POINT('',(142.,-127.5,-4.6E-02)); +#370408 = DIRECTION('',(-0.,-0.,-1.)); +#370409 = DIRECTION('',(-0.,-1.,0.)); +#370410 = MANIFOLD_SOLID_BREP('',#370411); +#370411 = CLOSED_SHELL('',(#370412,#370445,#370465,#370485)); +#370412 = ADVANCED_FACE('',(#370413),#370440,.T.); +#370413 = FACE_BOUND('',#370414,.F.); +#370414 = EDGE_LOOP('',(#370415,#370425,#370432,#370433)); +#370415 = ORIENTED_EDGE('',*,*,#370416,.T.); +#370416 = EDGE_CURVE('',#370417,#370419,#370421,.T.); +#370417 = VERTEX_POINT('',#370418); +#370418 = CARTESIAN_POINT('',(142.,-127.96,-4.E-02)); +#370419 = VERTEX_POINT('',#370420); +#370420 = CARTESIAN_POINT('',(142.,-127.96,1.55)); +#370421 = LINE('',#370422,#370423); +#370422 = CARTESIAN_POINT('',(142.,-127.96,-4.E-02)); +#370423 = VECTOR('',#370424,1.); +#370424 = DIRECTION('',(0.,0.,1.)); +#370425 = ORIENTED_EDGE('',*,*,#370426,.T.); +#370426 = EDGE_CURVE('',#370419,#370419,#370427,.T.); +#370427 = CIRCLE('',#370428,0.46); +#370428 = AXIS2_PLACEMENT_3D('',#370429,#370430,#370431); +#370429 = CARTESIAN_POINT('',(142.,-127.5,1.55)); +#370430 = DIRECTION('',(0.,0.,1.)); +#370431 = DIRECTION('',(-0.,-1.,0.)); +#370432 = ORIENTED_EDGE('',*,*,#370416,.F.); +#370433 = ORIENTED_EDGE('',*,*,#370434,.F.); +#370434 = EDGE_CURVE('',#370417,#370417,#370435,.T.); +#370435 = CIRCLE('',#370436,0.46); +#370436 = AXIS2_PLACEMENT_3D('',#370437,#370438,#370439); +#370437 = CARTESIAN_POINT('',(142.,-127.5,-4.E-02)); +#370438 = DIRECTION('',(0.,0.,1.)); +#370439 = DIRECTION('',(-0.,-1.,0.)); +#370440 = CYLINDRICAL_SURFACE('',#370441,0.46); +#370441 = AXIS2_PLACEMENT_3D('',#370442,#370443,#370444); +#370442 = CARTESIAN_POINT('',(142.,-127.5,-4.E-02)); +#370443 = DIRECTION('',(-0.,-0.,-1.)); +#370444 = DIRECTION('',(-0.,-1.,0.)); +#370445 = ADVANCED_FACE('',(#370446,#370449),#370460,.F.); +#370446 = FACE_BOUND('',#370447,.F.); +#370447 = EDGE_LOOP('',(#370448)); +#370448 = ORIENTED_EDGE('',*,*,#370434,.T.); +#370449 = FACE_BOUND('',#370450,.F.); +#370450 = EDGE_LOOP('',(#370451)); +#370451 = ORIENTED_EDGE('',*,*,#370452,.T.); +#370452 = EDGE_CURVE('',#370453,#370453,#370455,.T.); +#370453 = VERTEX_POINT('',#370454); +#370454 = CARTESIAN_POINT('',(142.,-127.935,-4.E-02)); +#370455 = CIRCLE('',#370456,0.435); +#370456 = AXIS2_PLACEMENT_3D('',#370457,#370458,#370459); +#370457 = CARTESIAN_POINT('',(142.,-127.5,-4.E-02)); +#370458 = DIRECTION('',(-0.,0.,-1.)); +#370459 = DIRECTION('',(-0.,-1.,0.)); +#370460 = PLANE('',#370461); +#370461 = AXIS2_PLACEMENT_3D('',#370462,#370463,#370464); +#370462 = CARTESIAN_POINT('',(142.,-127.96,-4.E-02)); +#370463 = DIRECTION('',(0.,0.,1.)); +#370464 = DIRECTION('',(1.,0.,-0.)); +#370465 = ADVANCED_FACE('',(#370466,#370469),#370480,.T.); +#370466 = FACE_BOUND('',#370467,.T.); +#370467 = EDGE_LOOP('',(#370468)); +#370468 = ORIENTED_EDGE('',*,*,#370426,.T.); +#370469 = FACE_BOUND('',#370470,.T.); +#370470 = EDGE_LOOP('',(#370471)); +#370471 = ORIENTED_EDGE('',*,*,#370472,.T.); +#370472 = EDGE_CURVE('',#370473,#370473,#370475,.T.); +#370473 = VERTEX_POINT('',#370474); +#370474 = CARTESIAN_POINT('',(142.,-127.935,1.55)); +#370475 = CIRCLE('',#370476,0.435); +#370476 = AXIS2_PLACEMENT_3D('',#370477,#370478,#370479); +#370477 = CARTESIAN_POINT('',(142.,-127.5,1.55)); +#370478 = DIRECTION('',(-0.,0.,-1.)); +#370479 = DIRECTION('',(-0.,-1.,0.)); +#370480 = PLANE('',#370481); +#370481 = AXIS2_PLACEMENT_3D('',#370482,#370483,#370484); +#370482 = CARTESIAN_POINT('',(142.,-127.96,1.55)); +#370483 = DIRECTION('',(0.,0.,1.)); +#370484 = DIRECTION('',(1.,0.,-0.)); +#370485 = ADVANCED_FACE('',(#370486),#370497,.F.); +#370486 = FACE_BOUND('',#370487,.T.); +#370487 = EDGE_LOOP('',(#370488,#370489,#370495,#370496)); +#370488 = ORIENTED_EDGE('',*,*,#370452,.T.); +#370489 = ORIENTED_EDGE('',*,*,#370490,.T.); +#370490 = EDGE_CURVE('',#370453,#370473,#370491,.T.); +#370491 = LINE('',#370492,#370493); +#370492 = CARTESIAN_POINT('',(142.,-127.935,-4.6E-02)); +#370493 = VECTOR('',#370494,1.); +#370494 = DIRECTION('',(0.,0.,1.)); +#370495 = ORIENTED_EDGE('',*,*,#370472,.F.); +#370496 = ORIENTED_EDGE('',*,*,#370490,.F.); +#370497 = CYLINDRICAL_SURFACE('',#370498,0.435); +#370498 = AXIS2_PLACEMENT_3D('',#370499,#370500,#370501); +#370499 = CARTESIAN_POINT('',(142.,-127.5,-4.6E-02)); +#370500 = DIRECTION('',(-0.,-0.,-1.)); +#370501 = DIRECTION('',(-0.,-1.,0.)); +#370502 = MANIFOLD_SOLID_BREP('',#370503); +#370503 = CLOSED_SHELL('',(#370504,#370546,#370577,#370610,#370641, + #370674,#370705,#370738,#370760,#370776)); +#370504 = ADVANCED_FACE('',(#370505),#370541,.T.); +#370505 = FACE_BOUND('',#370506,.T.); +#370506 = EDGE_LOOP('',(#370507,#370517,#370526,#370534)); +#370507 = ORIENTED_EDGE('',*,*,#370508,.T.); +#370508 = EDGE_CURVE('',#370509,#370511,#370513,.T.); +#370509 = VERTEX_POINT('',#370510); +#370510 = CARTESIAN_POINT('',(137.49,-129.815,1.51)); +#370511 = VERTEX_POINT('',#370512); +#370512 = CARTESIAN_POINT('',(137.49,-129.815,1.55)); +#370513 = LINE('',#370514,#370515); +#370514 = CARTESIAN_POINT('',(137.49,-129.815,1.51)); +#370515 = VECTOR('',#370516,1.); +#370516 = DIRECTION('',(0.,0.,1.)); +#370517 = ORIENTED_EDGE('',*,*,#370518,.T.); +#370518 = EDGE_CURVE('',#370511,#370519,#370521,.T.); +#370519 = VERTEX_POINT('',#370520); +#370520 = CARTESIAN_POINT('',(137.625,-129.68,1.55)); +#370521 = CIRCLE('',#370522,0.135001418495); +#370522 = AXIS2_PLACEMENT_3D('',#370523,#370524,#370525); +#370523 = CARTESIAN_POINT('',(137.62500141848,-129.8150014184,1.55)); +#370524 = DIRECTION('',(0.,0.,-1.)); +#370525 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#370526 = ORIENTED_EDGE('',*,*,#370527,.F.); +#370527 = EDGE_CURVE('',#370528,#370519,#370530,.T.); +#370528 = VERTEX_POINT('',#370529); +#370529 = CARTESIAN_POINT('',(137.625,-129.68,1.51)); +#370530 = LINE('',#370531,#370532); +#370531 = CARTESIAN_POINT('',(137.625,-129.68,1.51)); +#370532 = VECTOR('',#370533,1.); +#370533 = DIRECTION('',(0.,0.,1.)); +#370534 = ORIENTED_EDGE('',*,*,#370535,.F.); +#370535 = EDGE_CURVE('',#370509,#370528,#370536,.T.); +#370536 = CIRCLE('',#370537,0.135001418495); +#370537 = AXIS2_PLACEMENT_3D('',#370538,#370539,#370540); +#370538 = CARTESIAN_POINT('',(137.62500141848,-129.8150014184,1.51)); +#370539 = DIRECTION('',(0.,0.,-1.)); +#370540 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#370541 = CYLINDRICAL_SURFACE('',#370542,0.135001418495); +#370542 = AXIS2_PLACEMENT_3D('',#370543,#370544,#370545); +#370543 = CARTESIAN_POINT('',(137.62500141848,-129.8150014184,1.51)); +#370544 = DIRECTION('',(0.,0.,-1.)); +#370545 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#370546 = ADVANCED_FACE('',(#370547),#370572,.T.); +#370547 = FACE_BOUND('',#370548,.T.); +#370548 = EDGE_LOOP('',(#370549,#370550,#370558,#370566)); +#370549 = ORIENTED_EDGE('',*,*,#370527,.T.); +#370550 = ORIENTED_EDGE('',*,*,#370551,.T.); +#370551 = EDGE_CURVE('',#370519,#370552,#370554,.T.); +#370552 = VERTEX_POINT('',#370553); +#370553 = CARTESIAN_POINT('',(137.895,-129.68,1.55)); +#370554 = LINE('',#370555,#370556); +#370555 = CARTESIAN_POINT('',(137.625,-129.68,1.55)); +#370556 = VECTOR('',#370557,1.); +#370557 = DIRECTION('',(1.,0.,0.)); +#370558 = ORIENTED_EDGE('',*,*,#370559,.F.); +#370559 = EDGE_CURVE('',#370560,#370552,#370562,.T.); +#370560 = VERTEX_POINT('',#370561); +#370561 = CARTESIAN_POINT('',(137.895,-129.68,1.51)); +#370562 = LINE('',#370563,#370564); +#370563 = CARTESIAN_POINT('',(137.895,-129.68,1.51)); +#370564 = VECTOR('',#370565,1.); +#370565 = DIRECTION('',(0.,0.,1.)); +#370566 = ORIENTED_EDGE('',*,*,#370567,.F.); +#370567 = EDGE_CURVE('',#370528,#370560,#370568,.T.); +#370568 = LINE('',#370569,#370570); +#370569 = CARTESIAN_POINT('',(137.625,-129.68,1.51)); +#370570 = VECTOR('',#370571,1.); +#370571 = DIRECTION('',(1.,0.,0.)); +#370572 = PLANE('',#370573); +#370573 = AXIS2_PLACEMENT_3D('',#370574,#370575,#370576); +#370574 = CARTESIAN_POINT('',(137.625,-129.68,1.51)); +#370575 = DIRECTION('',(0.,1.,0.)); +#370576 = DIRECTION('',(1.,0.,0.)); +#370577 = ADVANCED_FACE('',(#370578),#370605,.T.); +#370578 = FACE_BOUND('',#370579,.T.); +#370579 = EDGE_LOOP('',(#370580,#370581,#370590,#370598)); +#370580 = ORIENTED_EDGE('',*,*,#370559,.T.); +#370581 = ORIENTED_EDGE('',*,*,#370582,.T.); +#370582 = EDGE_CURVE('',#370552,#370583,#370585,.T.); +#370583 = VERTEX_POINT('',#370584); +#370584 = CARTESIAN_POINT('',(138.03,-129.815,1.55)); +#370585 = CIRCLE('',#370586,0.135001418495); +#370586 = AXIS2_PLACEMENT_3D('',#370587,#370588,#370589); +#370587 = CARTESIAN_POINT('',(137.89499858151,-129.8150014184,1.55)); +#370588 = DIRECTION('',(0.,0.,-1.)); +#370589 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#370590 = ORIENTED_EDGE('',*,*,#370591,.F.); +#370591 = EDGE_CURVE('',#370592,#370583,#370594,.T.); +#370592 = VERTEX_POINT('',#370593); +#370593 = CARTESIAN_POINT('',(138.03,-129.815,1.51)); +#370594 = LINE('',#370595,#370596); +#370595 = CARTESIAN_POINT('',(138.03,-129.815,1.51)); +#370596 = VECTOR('',#370597,1.); +#370597 = DIRECTION('',(0.,0.,1.)); +#370598 = ORIENTED_EDGE('',*,*,#370599,.F.); +#370599 = EDGE_CURVE('',#370560,#370592,#370600,.T.); +#370600 = CIRCLE('',#370601,0.135001418495); +#370601 = AXIS2_PLACEMENT_3D('',#370602,#370603,#370604); +#370602 = CARTESIAN_POINT('',(137.89499858151,-129.8150014184,1.51)); +#370603 = DIRECTION('',(0.,0.,-1.)); +#370604 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#370605 = CYLINDRICAL_SURFACE('',#370606,0.135001418495); +#370606 = AXIS2_PLACEMENT_3D('',#370607,#370608,#370609); +#370607 = CARTESIAN_POINT('',(137.89499858151,-129.8150014184,1.51)); +#370608 = DIRECTION('',(0.,0.,-1.)); +#370609 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#370610 = ADVANCED_FACE('',(#370611),#370636,.T.); +#370611 = FACE_BOUND('',#370612,.T.); +#370612 = EDGE_LOOP('',(#370613,#370614,#370622,#370630)); +#370613 = ORIENTED_EDGE('',*,*,#370591,.T.); +#370614 = ORIENTED_EDGE('',*,*,#370615,.T.); +#370615 = EDGE_CURVE('',#370583,#370616,#370618,.T.); +#370616 = VERTEX_POINT('',#370617); +#370617 = CARTESIAN_POINT('',(138.03,-130.185,1.55)); +#370618 = LINE('',#370619,#370620); +#370619 = CARTESIAN_POINT('',(138.03,-129.815,1.55)); +#370620 = VECTOR('',#370621,1.); +#370621 = DIRECTION('',(0.,-1.,0.)); +#370622 = ORIENTED_EDGE('',*,*,#370623,.F.); +#370623 = EDGE_CURVE('',#370624,#370616,#370626,.T.); +#370624 = VERTEX_POINT('',#370625); +#370625 = CARTESIAN_POINT('',(138.03,-130.185,1.51)); +#370626 = LINE('',#370627,#370628); +#370627 = CARTESIAN_POINT('',(138.03,-130.185,1.51)); +#370628 = VECTOR('',#370629,1.); +#370629 = DIRECTION('',(0.,0.,1.)); +#370630 = ORIENTED_EDGE('',*,*,#370631,.F.); +#370631 = EDGE_CURVE('',#370592,#370624,#370632,.T.); +#370632 = LINE('',#370633,#370634); +#370633 = CARTESIAN_POINT('',(138.03,-129.815,1.51)); +#370634 = VECTOR('',#370635,1.); +#370635 = DIRECTION('',(0.,-1.,0.)); +#370636 = PLANE('',#370637); +#370637 = AXIS2_PLACEMENT_3D('',#370638,#370639,#370640); +#370638 = CARTESIAN_POINT('',(138.03,-129.815,1.51)); +#370639 = DIRECTION('',(1.,0.,-0.)); +#370640 = DIRECTION('',(0.,-1.,0.)); +#370641 = ADVANCED_FACE('',(#370642),#370669,.T.); +#370642 = FACE_BOUND('',#370643,.T.); +#370643 = EDGE_LOOP('',(#370644,#370645,#370654,#370662)); +#370644 = ORIENTED_EDGE('',*,*,#370623,.T.); +#370645 = ORIENTED_EDGE('',*,*,#370646,.T.); +#370646 = EDGE_CURVE('',#370616,#370647,#370649,.T.); +#370647 = VERTEX_POINT('',#370648); +#370648 = CARTESIAN_POINT('',(137.895,-130.32,1.55)); +#370649 = CIRCLE('',#370650,0.135001418495); +#370650 = AXIS2_PLACEMENT_3D('',#370651,#370652,#370653); +#370651 = CARTESIAN_POINT('',(137.89499858151,-130.1849985815,1.55)); +#370652 = DIRECTION('',(0.,0.,-1.)); +#370653 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#370654 = ORIENTED_EDGE('',*,*,#370655,.F.); +#370655 = EDGE_CURVE('',#370656,#370647,#370658,.T.); +#370656 = VERTEX_POINT('',#370657); +#370657 = CARTESIAN_POINT('',(137.895,-130.32,1.51)); +#370658 = LINE('',#370659,#370660); +#370659 = CARTESIAN_POINT('',(137.895,-130.32,1.51)); +#370660 = VECTOR('',#370661,1.); +#370661 = DIRECTION('',(0.,0.,1.)); +#370662 = ORIENTED_EDGE('',*,*,#370663,.F.); +#370663 = EDGE_CURVE('',#370624,#370656,#370664,.T.); +#370664 = CIRCLE('',#370665,0.135001418495); +#370665 = AXIS2_PLACEMENT_3D('',#370666,#370667,#370668); +#370666 = CARTESIAN_POINT('',(137.89499858151,-130.1849985815,1.51)); +#370667 = DIRECTION('',(0.,0.,-1.)); +#370668 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#370669 = CYLINDRICAL_SURFACE('',#370670,0.135001418495); +#370670 = AXIS2_PLACEMENT_3D('',#370671,#370672,#370673); +#370671 = CARTESIAN_POINT('',(137.89499858151,-130.1849985815,1.51)); +#370672 = DIRECTION('',(0.,0.,-1.)); +#370673 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#370674 = ADVANCED_FACE('',(#370675),#370700,.T.); +#370675 = FACE_BOUND('',#370676,.T.); +#370676 = EDGE_LOOP('',(#370677,#370678,#370686,#370694)); +#370677 = ORIENTED_EDGE('',*,*,#370655,.T.); +#370678 = ORIENTED_EDGE('',*,*,#370679,.T.); +#370679 = EDGE_CURVE('',#370647,#370680,#370682,.T.); +#370680 = VERTEX_POINT('',#370681); +#370681 = CARTESIAN_POINT('',(137.625,-130.32,1.55)); +#370682 = LINE('',#370683,#370684); +#370683 = CARTESIAN_POINT('',(137.895,-130.32,1.55)); +#370684 = VECTOR('',#370685,1.); +#370685 = DIRECTION('',(-1.,0.,0.)); +#370686 = ORIENTED_EDGE('',*,*,#370687,.F.); +#370687 = EDGE_CURVE('',#370688,#370680,#370690,.T.); +#370688 = VERTEX_POINT('',#370689); +#370689 = CARTESIAN_POINT('',(137.625,-130.32,1.51)); +#370690 = LINE('',#370691,#370692); +#370691 = CARTESIAN_POINT('',(137.625,-130.32,1.51)); +#370692 = VECTOR('',#370693,1.); +#370693 = DIRECTION('',(0.,0.,1.)); +#370694 = ORIENTED_EDGE('',*,*,#370695,.F.); +#370695 = EDGE_CURVE('',#370656,#370688,#370696,.T.); +#370696 = LINE('',#370697,#370698); +#370697 = CARTESIAN_POINT('',(137.895,-130.32,1.51)); +#370698 = VECTOR('',#370699,1.); +#370699 = DIRECTION('',(-1.,0.,0.)); +#370700 = PLANE('',#370701); +#370701 = AXIS2_PLACEMENT_3D('',#370702,#370703,#370704); +#370702 = CARTESIAN_POINT('',(137.895,-130.32,1.51)); +#370703 = DIRECTION('',(0.,-1.,0.)); +#370704 = DIRECTION('',(-1.,0.,0.)); +#370705 = ADVANCED_FACE('',(#370706),#370733,.T.); +#370706 = FACE_BOUND('',#370707,.T.); +#370707 = EDGE_LOOP('',(#370708,#370709,#370718,#370726)); +#370708 = ORIENTED_EDGE('',*,*,#370687,.T.); +#370709 = ORIENTED_EDGE('',*,*,#370710,.T.); +#370710 = EDGE_CURVE('',#370680,#370711,#370713,.T.); +#370711 = VERTEX_POINT('',#370712); +#370712 = CARTESIAN_POINT('',(137.49,-130.185,1.55)); +#370713 = CIRCLE('',#370714,0.135001418495); +#370714 = AXIS2_PLACEMENT_3D('',#370715,#370716,#370717); +#370715 = CARTESIAN_POINT('',(137.62500141848,-130.1849985815,1.55)); +#370716 = DIRECTION('',(0.,0.,-1.)); +#370717 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370718 = ORIENTED_EDGE('',*,*,#370719,.F.); +#370719 = EDGE_CURVE('',#370720,#370711,#370722,.T.); +#370720 = VERTEX_POINT('',#370721); +#370721 = CARTESIAN_POINT('',(137.49,-130.185,1.51)); +#370722 = LINE('',#370723,#370724); +#370723 = CARTESIAN_POINT('',(137.49,-130.185,1.51)); +#370724 = VECTOR('',#370725,1.); +#370725 = DIRECTION('',(0.,0.,1.)); +#370726 = ORIENTED_EDGE('',*,*,#370727,.F.); +#370727 = EDGE_CURVE('',#370688,#370720,#370728,.T.); +#370728 = CIRCLE('',#370729,0.135001418495); +#370729 = AXIS2_PLACEMENT_3D('',#370730,#370731,#370732); +#370730 = CARTESIAN_POINT('',(137.62500141848,-130.1849985815,1.51)); +#370731 = DIRECTION('',(0.,0.,-1.)); +#370732 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370733 = CYLINDRICAL_SURFACE('',#370734,0.135001418495); +#370734 = AXIS2_PLACEMENT_3D('',#370735,#370736,#370737); +#370735 = CARTESIAN_POINT('',(137.62500141848,-130.1849985815,1.51)); +#370736 = DIRECTION('',(0.,0.,-1.)); +#370737 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#370738 = ADVANCED_FACE('',(#370739),#370755,.T.); +#370739 = FACE_BOUND('',#370740,.T.); +#370740 = EDGE_LOOP('',(#370741,#370742,#370748,#370749)); +#370741 = ORIENTED_EDGE('',*,*,#370719,.T.); +#370742 = ORIENTED_EDGE('',*,*,#370743,.T.); +#370743 = EDGE_CURVE('',#370711,#370511,#370744,.T.); +#370744 = LINE('',#370745,#370746); +#370745 = CARTESIAN_POINT('',(137.49,-130.185,1.55)); +#370746 = VECTOR('',#370747,1.); +#370747 = DIRECTION('',(0.,1.,0.)); +#370748 = ORIENTED_EDGE('',*,*,#370508,.F.); +#370749 = ORIENTED_EDGE('',*,*,#370750,.F.); +#370750 = EDGE_CURVE('',#370720,#370509,#370751,.T.); +#370751 = LINE('',#370752,#370753); +#370752 = CARTESIAN_POINT('',(137.49,-130.185,1.51)); +#370753 = VECTOR('',#370754,1.); +#370754 = DIRECTION('',(0.,1.,0.)); +#370755 = PLANE('',#370756); +#370756 = AXIS2_PLACEMENT_3D('',#370757,#370758,#370759); +#370757 = CARTESIAN_POINT('',(137.49,-130.185,1.51)); +#370758 = DIRECTION('',(-1.,0.,0.)); +#370759 = DIRECTION('',(0.,1.,0.)); +#370760 = ADVANCED_FACE('',(#370761),#370771,.F.); +#370761 = FACE_BOUND('',#370762,.T.); +#370762 = EDGE_LOOP('',(#370763,#370764,#370765,#370766,#370767,#370768, + #370769,#370770)); +#370763 = ORIENTED_EDGE('',*,*,#370535,.T.); +#370764 = ORIENTED_EDGE('',*,*,#370567,.T.); +#370765 = ORIENTED_EDGE('',*,*,#370599,.T.); +#370766 = ORIENTED_EDGE('',*,*,#370631,.T.); +#370767 = ORIENTED_EDGE('',*,*,#370663,.T.); +#370768 = ORIENTED_EDGE('',*,*,#370695,.T.); +#370769 = ORIENTED_EDGE('',*,*,#370727,.T.); +#370770 = ORIENTED_EDGE('',*,*,#370750,.T.); +#370771 = PLANE('',#370772); +#370772 = AXIS2_PLACEMENT_3D('',#370773,#370774,#370775); +#370773 = CARTESIAN_POINT('',(0.,0.,1.51)); +#370774 = DIRECTION('',(0.,0.,1.)); +#370775 = DIRECTION('',(1.,0.,-0.)); +#370776 = ADVANCED_FACE('',(#370777),#370787,.T.); +#370777 = FACE_BOUND('',#370778,.F.); +#370778 = EDGE_LOOP('',(#370779,#370780,#370781,#370782,#370783,#370784, + #370785,#370786)); +#370779 = ORIENTED_EDGE('',*,*,#370518,.T.); +#370780 = ORIENTED_EDGE('',*,*,#370551,.T.); +#370781 = ORIENTED_EDGE('',*,*,#370582,.T.); +#370782 = ORIENTED_EDGE('',*,*,#370615,.T.); +#370783 = ORIENTED_EDGE('',*,*,#370646,.T.); +#370784 = ORIENTED_EDGE('',*,*,#370679,.T.); +#370785 = ORIENTED_EDGE('',*,*,#370710,.T.); +#370786 = ORIENTED_EDGE('',*,*,#370743,.T.); +#370787 = PLANE('',#370788); +#370788 = AXIS2_PLACEMENT_3D('',#370789,#370790,#370791); +#370789 = CARTESIAN_POINT('',(0.,0.,1.55)); +#370790 = DIRECTION('',(0.,0.,1.)); +#370791 = DIRECTION('',(1.,0.,-0.)); +#370792 = MANIFOLD_SOLID_BREP('',#370793); +#370793 = CLOSED_SHELL('',(#370794,#370836,#370867,#370900,#370931, + #370964,#370995,#371028,#371050,#371066)); +#370794 = ADVANCED_FACE('',(#370795),#370831,.T.); +#370795 = FACE_BOUND('',#370796,.T.); +#370796 = EDGE_LOOP('',(#370797,#370807,#370816,#370824)); +#370797 = ORIENTED_EDGE('',*,*,#370798,.T.); +#370798 = EDGE_CURVE('',#370799,#370801,#370803,.T.); +#370799 = VERTEX_POINT('',#370800); +#370800 = CARTESIAN_POINT('',(150.19,-153.09,1.51)); +#370801 = VERTEX_POINT('',#370802); +#370802 = CARTESIAN_POINT('',(150.19,-153.09,1.55)); +#370803 = LINE('',#370804,#370805); +#370804 = CARTESIAN_POINT('',(150.19,-153.09,1.51)); +#370805 = VECTOR('',#370806,1.); +#370806 = DIRECTION('',(0.,0.,1.)); +#370807 = ORIENTED_EDGE('',*,*,#370808,.T.); +#370808 = EDGE_CURVE('',#370801,#370809,#370811,.T.); +#370809 = VERTEX_POINT('',#370810); +#370810 = CARTESIAN_POINT('',(150.33,-152.95,1.55)); +#370811 = CIRCLE('',#370812,0.139999827125); +#370812 = AXIS2_PLACEMENT_3D('',#370813,#370814,#370815); +#370813 = CARTESIAN_POINT('',(150.32999982712,-153.0899998271,1.55)); +#370814 = DIRECTION('',(0.,0.,-1.)); +#370815 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#370816 = ORIENTED_EDGE('',*,*,#370817,.F.); +#370817 = EDGE_CURVE('',#370818,#370809,#370820,.T.); +#370818 = VERTEX_POINT('',#370819); +#370819 = CARTESIAN_POINT('',(150.33,-152.95,1.51)); +#370820 = LINE('',#370821,#370822); +#370821 = CARTESIAN_POINT('',(150.33,-152.95,1.51)); +#370822 = VECTOR('',#370823,1.); +#370823 = DIRECTION('',(0.,0.,1.)); +#370824 = ORIENTED_EDGE('',*,*,#370825,.F.); +#370825 = EDGE_CURVE('',#370799,#370818,#370826,.T.); +#370826 = CIRCLE('',#370827,0.139999827125); +#370827 = AXIS2_PLACEMENT_3D('',#370828,#370829,#370830); +#370828 = CARTESIAN_POINT('',(150.32999982712,-153.0899998271,1.51)); +#370829 = DIRECTION('',(0.,0.,-1.)); +#370830 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#370831 = CYLINDRICAL_SURFACE('',#370832,0.139999827125); +#370832 = AXIS2_PLACEMENT_3D('',#370833,#370834,#370835); +#370833 = CARTESIAN_POINT('',(150.32999982712,-153.0899998271,1.51)); +#370834 = DIRECTION('',(0.,0.,-1.)); +#370835 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#370836 = ADVANCED_FACE('',(#370837),#370862,.T.); +#370837 = FACE_BOUND('',#370838,.T.); +#370838 = EDGE_LOOP('',(#370839,#370840,#370848,#370856)); +#370839 = ORIENTED_EDGE('',*,*,#370817,.T.); +#370840 = ORIENTED_EDGE('',*,*,#370841,.T.); +#370841 = EDGE_CURVE('',#370809,#370842,#370844,.T.); +#370842 = VERTEX_POINT('',#370843); +#370843 = CARTESIAN_POINT('',(150.67,-152.95,1.55)); +#370844 = LINE('',#370845,#370846); +#370845 = CARTESIAN_POINT('',(150.33,-152.95,1.55)); +#370846 = VECTOR('',#370847,1.); +#370847 = DIRECTION('',(1.,0.,0.)); +#370848 = ORIENTED_EDGE('',*,*,#370849,.F.); +#370849 = EDGE_CURVE('',#370850,#370842,#370852,.T.); +#370850 = VERTEX_POINT('',#370851); +#370851 = CARTESIAN_POINT('',(150.67,-152.95,1.51)); +#370852 = LINE('',#370853,#370854); +#370853 = CARTESIAN_POINT('',(150.67,-152.95,1.51)); +#370854 = VECTOR('',#370855,1.); +#370855 = DIRECTION('',(0.,0.,1.)); +#370856 = ORIENTED_EDGE('',*,*,#370857,.F.); +#370857 = EDGE_CURVE('',#370818,#370850,#370858,.T.); +#370858 = LINE('',#370859,#370860); +#370859 = CARTESIAN_POINT('',(150.33,-152.95,1.51)); +#370860 = VECTOR('',#370861,1.); +#370861 = DIRECTION('',(1.,0.,0.)); +#370862 = PLANE('',#370863); +#370863 = AXIS2_PLACEMENT_3D('',#370864,#370865,#370866); +#370864 = CARTESIAN_POINT('',(150.33,-152.95,1.51)); +#370865 = DIRECTION('',(0.,1.,0.)); +#370866 = DIRECTION('',(1.,0.,0.)); +#370867 = ADVANCED_FACE('',(#370868),#370895,.T.); +#370868 = FACE_BOUND('',#370869,.T.); +#370869 = EDGE_LOOP('',(#370870,#370871,#370880,#370888)); +#370870 = ORIENTED_EDGE('',*,*,#370849,.T.); +#370871 = ORIENTED_EDGE('',*,*,#370872,.T.); +#370872 = EDGE_CURVE('',#370842,#370873,#370875,.T.); +#370873 = VERTEX_POINT('',#370874); +#370874 = CARTESIAN_POINT('',(150.81,-153.09,1.55)); +#370875 = CIRCLE('',#370876,0.139999827125); +#370876 = AXIS2_PLACEMENT_3D('',#370877,#370878,#370879); +#370877 = CARTESIAN_POINT('',(150.67000017287,-153.0899998271,1.55)); +#370878 = DIRECTION('',(0.,0.,-1.)); +#370879 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#370880 = ORIENTED_EDGE('',*,*,#370881,.F.); +#370881 = EDGE_CURVE('',#370882,#370873,#370884,.T.); +#370882 = VERTEX_POINT('',#370883); +#370883 = CARTESIAN_POINT('',(150.81,-153.09,1.51)); +#370884 = LINE('',#370885,#370886); +#370885 = CARTESIAN_POINT('',(150.81,-153.09,1.51)); +#370886 = VECTOR('',#370887,1.); +#370887 = DIRECTION('',(0.,0.,1.)); +#370888 = ORIENTED_EDGE('',*,*,#370889,.F.); +#370889 = EDGE_CURVE('',#370850,#370882,#370890,.T.); +#370890 = CIRCLE('',#370891,0.139999827125); +#370891 = AXIS2_PLACEMENT_3D('',#370892,#370893,#370894); +#370892 = CARTESIAN_POINT('',(150.67000017287,-153.0899998271,1.51)); +#370893 = DIRECTION('',(0.,0.,-1.)); +#370894 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#370895 = CYLINDRICAL_SURFACE('',#370896,0.139999827125); +#370896 = AXIS2_PLACEMENT_3D('',#370897,#370898,#370899); +#370897 = CARTESIAN_POINT('',(150.67000017287,-153.0899998271,1.51)); +#370898 = DIRECTION('',(0.,0.,-1.)); +#370899 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#370900 = ADVANCED_FACE('',(#370901),#370926,.T.); +#370901 = FACE_BOUND('',#370902,.T.); +#370902 = EDGE_LOOP('',(#370903,#370904,#370912,#370920)); +#370903 = ORIENTED_EDGE('',*,*,#370881,.T.); +#370904 = ORIENTED_EDGE('',*,*,#370905,.T.); +#370905 = EDGE_CURVE('',#370873,#370906,#370908,.T.); +#370906 = VERTEX_POINT('',#370907); +#370907 = CARTESIAN_POINT('',(150.81,-153.37,1.55)); +#370908 = LINE('',#370909,#370910); +#370909 = CARTESIAN_POINT('',(150.81,-153.09,1.55)); +#370910 = VECTOR('',#370911,1.); +#370911 = DIRECTION('',(0.,-1.,0.)); +#370912 = ORIENTED_EDGE('',*,*,#370913,.F.); +#370913 = EDGE_CURVE('',#370914,#370906,#370916,.T.); +#370914 = VERTEX_POINT('',#370915); +#370915 = CARTESIAN_POINT('',(150.81,-153.37,1.51)); +#370916 = LINE('',#370917,#370918); +#370917 = CARTESIAN_POINT('',(150.81,-153.37,1.51)); +#370918 = VECTOR('',#370919,1.); +#370919 = DIRECTION('',(0.,0.,1.)); +#370920 = ORIENTED_EDGE('',*,*,#370921,.F.); +#370921 = EDGE_CURVE('',#370882,#370914,#370922,.T.); +#370922 = LINE('',#370923,#370924); +#370923 = CARTESIAN_POINT('',(150.81,-153.09,1.51)); +#370924 = VECTOR('',#370925,1.); +#370925 = DIRECTION('',(0.,-1.,0.)); +#370926 = PLANE('',#370927); +#370927 = AXIS2_PLACEMENT_3D('',#370928,#370929,#370930); +#370928 = CARTESIAN_POINT('',(150.81,-153.09,1.51)); +#370929 = DIRECTION('',(1.,0.,-0.)); +#370930 = DIRECTION('',(0.,-1.,0.)); +#370931 = ADVANCED_FACE('',(#370932),#370959,.T.); +#370932 = FACE_BOUND('',#370933,.T.); +#370933 = EDGE_LOOP('',(#370934,#370935,#370944,#370952)); +#370934 = ORIENTED_EDGE('',*,*,#370913,.T.); +#370935 = ORIENTED_EDGE('',*,*,#370936,.T.); +#370936 = EDGE_CURVE('',#370906,#370937,#370939,.T.); +#370937 = VERTEX_POINT('',#370938); +#370938 = CARTESIAN_POINT('',(150.67,-153.51,1.55)); +#370939 = CIRCLE('',#370940,0.139999827125); +#370940 = AXIS2_PLACEMENT_3D('',#370941,#370942,#370943); +#370941 = CARTESIAN_POINT('',(150.67000017287,-153.3700001728,1.55)); +#370942 = DIRECTION('',(0.,0.,-1.)); +#370943 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#370944 = ORIENTED_EDGE('',*,*,#370945,.F.); +#370945 = EDGE_CURVE('',#370946,#370937,#370948,.T.); +#370946 = VERTEX_POINT('',#370947); +#370947 = CARTESIAN_POINT('',(150.67,-153.51,1.51)); +#370948 = LINE('',#370949,#370950); +#370949 = CARTESIAN_POINT('',(150.67,-153.51,1.51)); +#370950 = VECTOR('',#370951,1.); +#370951 = DIRECTION('',(0.,0.,1.)); +#370952 = ORIENTED_EDGE('',*,*,#370953,.F.); +#370953 = EDGE_CURVE('',#370914,#370946,#370954,.T.); +#370954 = CIRCLE('',#370955,0.139999827125); +#370955 = AXIS2_PLACEMENT_3D('',#370956,#370957,#370958); +#370956 = CARTESIAN_POINT('',(150.67000017287,-153.3700001728,1.51)); +#370957 = DIRECTION('',(0.,0.,-1.)); +#370958 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#370959 = CYLINDRICAL_SURFACE('',#370960,0.139999827125); +#370960 = AXIS2_PLACEMENT_3D('',#370961,#370962,#370963); +#370961 = CARTESIAN_POINT('',(150.67000017287,-153.3700001728,1.51)); +#370962 = DIRECTION('',(0.,0.,-1.)); +#370963 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#370964 = ADVANCED_FACE('',(#370965),#370990,.T.); +#370965 = FACE_BOUND('',#370966,.T.); +#370966 = EDGE_LOOP('',(#370967,#370968,#370976,#370984)); +#370967 = ORIENTED_EDGE('',*,*,#370945,.T.); +#370968 = ORIENTED_EDGE('',*,*,#370969,.T.); +#370969 = EDGE_CURVE('',#370937,#370970,#370972,.T.); +#370970 = VERTEX_POINT('',#370971); +#370971 = CARTESIAN_POINT('',(150.33,-153.51,1.55)); +#370972 = LINE('',#370973,#370974); +#370973 = CARTESIAN_POINT('',(150.67,-153.51,1.55)); +#370974 = VECTOR('',#370975,1.); +#370975 = DIRECTION('',(-1.,0.,0.)); +#370976 = ORIENTED_EDGE('',*,*,#370977,.F.); +#370977 = EDGE_CURVE('',#370978,#370970,#370980,.T.); +#370978 = VERTEX_POINT('',#370979); +#370979 = CARTESIAN_POINT('',(150.33,-153.51,1.51)); +#370980 = LINE('',#370981,#370982); +#370981 = CARTESIAN_POINT('',(150.33,-153.51,1.51)); +#370982 = VECTOR('',#370983,1.); +#370983 = DIRECTION('',(0.,0.,1.)); +#370984 = ORIENTED_EDGE('',*,*,#370985,.F.); +#370985 = EDGE_CURVE('',#370946,#370978,#370986,.T.); +#370986 = LINE('',#370987,#370988); +#370987 = CARTESIAN_POINT('',(150.67,-153.51,1.51)); +#370988 = VECTOR('',#370989,1.); +#370989 = DIRECTION('',(-1.,0.,0.)); +#370990 = PLANE('',#370991); +#370991 = AXIS2_PLACEMENT_3D('',#370992,#370993,#370994); +#370992 = CARTESIAN_POINT('',(150.67,-153.51,1.51)); +#370993 = DIRECTION('',(0.,-1.,0.)); +#370994 = DIRECTION('',(-1.,0.,0.)); +#370995 = ADVANCED_FACE('',(#370996),#371023,.T.); +#370996 = FACE_BOUND('',#370997,.T.); +#370997 = EDGE_LOOP('',(#370998,#370999,#371008,#371016)); +#370998 = ORIENTED_EDGE('',*,*,#370977,.T.); +#370999 = ORIENTED_EDGE('',*,*,#371000,.T.); +#371000 = EDGE_CURVE('',#370970,#371001,#371003,.T.); +#371001 = VERTEX_POINT('',#371002); +#371002 = CARTESIAN_POINT('',(150.19,-153.37,1.55)); +#371003 = CIRCLE('',#371004,0.139999827125); +#371004 = AXIS2_PLACEMENT_3D('',#371005,#371006,#371007); +#371005 = CARTESIAN_POINT('',(150.32999982712,-153.3700001728,1.55)); +#371006 = DIRECTION('',(0.,0.,-1.)); +#371007 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#371008 = ORIENTED_EDGE('',*,*,#371009,.F.); +#371009 = EDGE_CURVE('',#371010,#371001,#371012,.T.); +#371010 = VERTEX_POINT('',#371011); +#371011 = CARTESIAN_POINT('',(150.19,-153.37,1.51)); +#371012 = LINE('',#371013,#371014); +#371013 = CARTESIAN_POINT('',(150.19,-153.37,1.51)); +#371014 = VECTOR('',#371015,1.); +#371015 = DIRECTION('',(0.,0.,1.)); +#371016 = ORIENTED_EDGE('',*,*,#371017,.F.); +#371017 = EDGE_CURVE('',#370978,#371010,#371018,.T.); +#371018 = CIRCLE('',#371019,0.139999827125); +#371019 = AXIS2_PLACEMENT_3D('',#371020,#371021,#371022); +#371020 = CARTESIAN_POINT('',(150.32999982712,-153.3700001728,1.51)); +#371021 = DIRECTION('',(0.,0.,-1.)); +#371022 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#371023 = CYLINDRICAL_SURFACE('',#371024,0.139999827125); +#371024 = AXIS2_PLACEMENT_3D('',#371025,#371026,#371027); +#371025 = CARTESIAN_POINT('',(150.32999982712,-153.3700001728,1.51)); +#371026 = DIRECTION('',(0.,0.,-1.)); +#371027 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#371028 = ADVANCED_FACE('',(#371029),#371045,.T.); +#371029 = FACE_BOUND('',#371030,.T.); +#371030 = EDGE_LOOP('',(#371031,#371032,#371038,#371039)); +#371031 = ORIENTED_EDGE('',*,*,#371009,.T.); +#371032 = ORIENTED_EDGE('',*,*,#371033,.T.); +#371033 = EDGE_CURVE('',#371001,#370801,#371034,.T.); +#371034 = LINE('',#371035,#371036); +#371035 = CARTESIAN_POINT('',(150.19,-153.37,1.55)); +#371036 = VECTOR('',#371037,1.); +#371037 = DIRECTION('',(0.,1.,0.)); +#371038 = ORIENTED_EDGE('',*,*,#370798,.F.); +#371039 = ORIENTED_EDGE('',*,*,#371040,.F.); +#371040 = EDGE_CURVE('',#371010,#370799,#371041,.T.); +#371041 = LINE('',#371042,#371043); +#371042 = CARTESIAN_POINT('',(150.19,-153.37,1.51)); +#371043 = VECTOR('',#371044,1.); +#371044 = DIRECTION('',(0.,1.,0.)); +#371045 = PLANE('',#371046); +#371046 = AXIS2_PLACEMENT_3D('',#371047,#371048,#371049); +#371047 = CARTESIAN_POINT('',(150.19,-153.37,1.51)); +#371048 = DIRECTION('',(-1.,0.,0.)); +#371049 = DIRECTION('',(0.,1.,0.)); +#371050 = ADVANCED_FACE('',(#371051),#371061,.F.); +#371051 = FACE_BOUND('',#371052,.T.); +#371052 = EDGE_LOOP('',(#371053,#371054,#371055,#371056,#371057,#371058, + #371059,#371060)); +#371053 = ORIENTED_EDGE('',*,*,#370825,.T.); +#371054 = ORIENTED_EDGE('',*,*,#370857,.T.); +#371055 = ORIENTED_EDGE('',*,*,#370889,.T.); +#371056 = ORIENTED_EDGE('',*,*,#370921,.T.); +#371057 = ORIENTED_EDGE('',*,*,#370953,.T.); +#371058 = ORIENTED_EDGE('',*,*,#370985,.T.); +#371059 = ORIENTED_EDGE('',*,*,#371017,.T.); +#371060 = ORIENTED_EDGE('',*,*,#371040,.T.); +#371061 = PLANE('',#371062); +#371062 = AXIS2_PLACEMENT_3D('',#371063,#371064,#371065); +#371063 = CARTESIAN_POINT('',(0.,0.,1.51)); +#371064 = DIRECTION('',(0.,0.,1.)); +#371065 = DIRECTION('',(1.,0.,-0.)); +#371066 = ADVANCED_FACE('',(#371067),#371077,.T.); +#371067 = FACE_BOUND('',#371068,.F.); +#371068 = EDGE_LOOP('',(#371069,#371070,#371071,#371072,#371073,#371074, + #371075,#371076)); +#371069 = ORIENTED_EDGE('',*,*,#370808,.T.); +#371070 = ORIENTED_EDGE('',*,*,#370841,.T.); +#371071 = ORIENTED_EDGE('',*,*,#370872,.T.); +#371072 = ORIENTED_EDGE('',*,*,#370905,.T.); +#371073 = ORIENTED_EDGE('',*,*,#370936,.T.); +#371074 = ORIENTED_EDGE('',*,*,#370969,.T.); +#371075 = ORIENTED_EDGE('',*,*,#371000,.T.); +#371076 = ORIENTED_EDGE('',*,*,#371033,.T.); +#371077 = PLANE('',#371078); +#371078 = AXIS2_PLACEMENT_3D('',#371079,#371080,#371081); +#371079 = CARTESIAN_POINT('',(0.,0.,1.55)); +#371080 = DIRECTION('',(0.,0.,1.)); +#371081 = DIRECTION('',(1.,0.,-0.)); +#371082 = MANIFOLD_SOLID_BREP('',#371083); +#371083 = CLOSED_SHELL('',(#371084,#371126,#371157,#371190,#371221, + #371254,#371285,#371318,#371340,#371356)); +#371084 = ADVANCED_FACE('',(#371085),#371121,.T.); +#371085 = FACE_BOUND('',#371086,.T.); +#371086 = EDGE_LOOP('',(#371087,#371097,#371106,#371114)); +#371087 = ORIENTED_EDGE('',*,*,#371088,.T.); +#371088 = EDGE_CURVE('',#371089,#371091,#371093,.T.); +#371089 = VERTEX_POINT('',#371090); +#371090 = CARTESIAN_POINT('',(140.69,-128.88,1.51)); +#371091 = VERTEX_POINT('',#371092); +#371092 = CARTESIAN_POINT('',(140.69,-128.88,1.55)); +#371093 = LINE('',#371094,#371095); +#371094 = CARTESIAN_POINT('',(140.69,-128.88,1.51)); +#371095 = VECTOR('',#371096,1.); +#371096 = DIRECTION('',(0.,0.,1.)); +#371097 = ORIENTED_EDGE('',*,*,#371098,.T.); +#371098 = EDGE_CURVE('',#371091,#371099,#371101,.T.); +#371099 = VERTEX_POINT('',#371100); +#371100 = CARTESIAN_POINT('',(140.83,-128.74,1.55)); +#371101 = CIRCLE('',#371102,0.139999827125); +#371102 = AXIS2_PLACEMENT_3D('',#371103,#371104,#371105); +#371103 = CARTESIAN_POINT('',(140.82999982712,-128.8799998271,1.55)); +#371104 = DIRECTION('',(0.,0.,-1.)); +#371105 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#371106 = ORIENTED_EDGE('',*,*,#371107,.F.); +#371107 = EDGE_CURVE('',#371108,#371099,#371110,.T.); +#371108 = VERTEX_POINT('',#371109); +#371109 = CARTESIAN_POINT('',(140.83,-128.74,1.51)); +#371110 = LINE('',#371111,#371112); +#371111 = CARTESIAN_POINT('',(140.83,-128.74,1.51)); +#371112 = VECTOR('',#371113,1.); +#371113 = DIRECTION('',(0.,0.,1.)); +#371114 = ORIENTED_EDGE('',*,*,#371115,.F.); +#371115 = EDGE_CURVE('',#371089,#371108,#371116,.T.); +#371116 = CIRCLE('',#371117,0.139999827125); +#371117 = AXIS2_PLACEMENT_3D('',#371118,#371119,#371120); +#371118 = CARTESIAN_POINT('',(140.82999982712,-128.8799998271,1.51)); +#371119 = DIRECTION('',(0.,0.,-1.)); +#371120 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#371121 = CYLINDRICAL_SURFACE('',#371122,0.139999827125); +#371122 = AXIS2_PLACEMENT_3D('',#371123,#371124,#371125); +#371123 = CARTESIAN_POINT('',(140.82999982712,-128.8799998271,1.51)); +#371124 = DIRECTION('',(0.,0.,-1.)); +#371125 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#371126 = ADVANCED_FACE('',(#371127),#371152,.T.); +#371127 = FACE_BOUND('',#371128,.T.); +#371128 = EDGE_LOOP('',(#371129,#371130,#371138,#371146)); +#371129 = ORIENTED_EDGE('',*,*,#371107,.T.); +#371130 = ORIENTED_EDGE('',*,*,#371131,.T.); +#371131 = EDGE_CURVE('',#371099,#371132,#371134,.T.); +#371132 = VERTEX_POINT('',#371133); +#371133 = CARTESIAN_POINT('',(141.17,-128.74,1.55)); +#371134 = LINE('',#371135,#371136); +#371135 = CARTESIAN_POINT('',(140.83,-128.74,1.55)); +#371136 = VECTOR('',#371137,1.); +#371137 = DIRECTION('',(1.,0.,0.)); +#371138 = ORIENTED_EDGE('',*,*,#371139,.F.); +#371139 = EDGE_CURVE('',#371140,#371132,#371142,.T.); +#371140 = VERTEX_POINT('',#371141); +#371141 = CARTESIAN_POINT('',(141.17,-128.74,1.51)); +#371142 = LINE('',#371143,#371144); +#371143 = CARTESIAN_POINT('',(141.17,-128.74,1.51)); +#371144 = VECTOR('',#371145,1.); +#371145 = DIRECTION('',(0.,0.,1.)); +#371146 = ORIENTED_EDGE('',*,*,#371147,.F.); +#371147 = EDGE_CURVE('',#371108,#371140,#371148,.T.); +#371148 = LINE('',#371149,#371150); +#371149 = CARTESIAN_POINT('',(140.83,-128.74,1.51)); +#371150 = VECTOR('',#371151,1.); +#371151 = DIRECTION('',(1.,0.,0.)); +#371152 = PLANE('',#371153); +#371153 = AXIS2_PLACEMENT_3D('',#371154,#371155,#371156); +#371154 = CARTESIAN_POINT('',(140.83,-128.74,1.51)); +#371155 = DIRECTION('',(0.,1.,0.)); +#371156 = DIRECTION('',(1.,0.,0.)); +#371157 = ADVANCED_FACE('',(#371158),#371185,.T.); +#371158 = FACE_BOUND('',#371159,.T.); +#371159 = EDGE_LOOP('',(#371160,#371161,#371170,#371178)); +#371160 = ORIENTED_EDGE('',*,*,#371139,.T.); +#371161 = ORIENTED_EDGE('',*,*,#371162,.T.); +#371162 = EDGE_CURVE('',#371132,#371163,#371165,.T.); +#371163 = VERTEX_POINT('',#371164); +#371164 = CARTESIAN_POINT('',(141.31,-128.88,1.55)); +#371165 = CIRCLE('',#371166,0.139999827125); +#371166 = AXIS2_PLACEMENT_3D('',#371167,#371168,#371169); +#371167 = CARTESIAN_POINT('',(141.17000017287,-128.8799998271,1.55)); +#371168 = DIRECTION('',(0.,0.,-1.)); +#371169 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#371170 = ORIENTED_EDGE('',*,*,#371171,.F.); +#371171 = EDGE_CURVE('',#371172,#371163,#371174,.T.); +#371172 = VERTEX_POINT('',#371173); +#371173 = CARTESIAN_POINT('',(141.31,-128.88,1.51)); +#371174 = LINE('',#371175,#371176); +#371175 = CARTESIAN_POINT('',(141.31,-128.88,1.51)); +#371176 = VECTOR('',#371177,1.); +#371177 = DIRECTION('',(0.,0.,1.)); +#371178 = ORIENTED_EDGE('',*,*,#371179,.F.); +#371179 = EDGE_CURVE('',#371140,#371172,#371180,.T.); +#371180 = CIRCLE('',#371181,0.139999827125); +#371181 = AXIS2_PLACEMENT_3D('',#371182,#371183,#371184); +#371182 = CARTESIAN_POINT('',(141.17000017287,-128.8799998271,1.51)); +#371183 = DIRECTION('',(0.,0.,-1.)); +#371184 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#371185 = CYLINDRICAL_SURFACE('',#371186,0.139999827125); +#371186 = AXIS2_PLACEMENT_3D('',#371187,#371188,#371189); +#371187 = CARTESIAN_POINT('',(141.17000017287,-128.8799998271,1.51)); +#371188 = DIRECTION('',(0.,0.,-1.)); +#371189 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#371190 = ADVANCED_FACE('',(#371191),#371216,.T.); +#371191 = FACE_BOUND('',#371192,.T.); +#371192 = EDGE_LOOP('',(#371193,#371194,#371202,#371210)); +#371193 = ORIENTED_EDGE('',*,*,#371171,.T.); +#371194 = ORIENTED_EDGE('',*,*,#371195,.T.); +#371195 = EDGE_CURVE('',#371163,#371196,#371198,.T.); +#371196 = VERTEX_POINT('',#371197); +#371197 = CARTESIAN_POINT('',(141.31,-129.16,1.55)); +#371198 = LINE('',#371199,#371200); +#371199 = CARTESIAN_POINT('',(141.31,-128.88,1.55)); +#371200 = VECTOR('',#371201,1.); +#371201 = DIRECTION('',(0.,-1.,0.)); +#371202 = ORIENTED_EDGE('',*,*,#371203,.F.); +#371203 = EDGE_CURVE('',#371204,#371196,#371206,.T.); +#371204 = VERTEX_POINT('',#371205); +#371205 = CARTESIAN_POINT('',(141.31,-129.16,1.51)); +#371206 = LINE('',#371207,#371208); +#371207 = CARTESIAN_POINT('',(141.31,-129.16,1.51)); +#371208 = VECTOR('',#371209,1.); +#371209 = DIRECTION('',(0.,0.,1.)); +#371210 = ORIENTED_EDGE('',*,*,#371211,.F.); +#371211 = EDGE_CURVE('',#371172,#371204,#371212,.T.); +#371212 = LINE('',#371213,#371214); +#371213 = CARTESIAN_POINT('',(141.31,-128.88,1.51)); +#371214 = VECTOR('',#371215,1.); +#371215 = DIRECTION('',(0.,-1.,0.)); +#371216 = PLANE('',#371217); +#371217 = AXIS2_PLACEMENT_3D('',#371218,#371219,#371220); +#371218 = CARTESIAN_POINT('',(141.31,-128.88,1.51)); +#371219 = DIRECTION('',(1.,0.,-0.)); +#371220 = DIRECTION('',(0.,-1.,0.)); +#371221 = ADVANCED_FACE('',(#371222),#371249,.T.); +#371222 = FACE_BOUND('',#371223,.T.); +#371223 = EDGE_LOOP('',(#371224,#371225,#371234,#371242)); +#371224 = ORIENTED_EDGE('',*,*,#371203,.T.); +#371225 = ORIENTED_EDGE('',*,*,#371226,.T.); +#371226 = EDGE_CURVE('',#371196,#371227,#371229,.T.); +#371227 = VERTEX_POINT('',#371228); +#371228 = CARTESIAN_POINT('',(141.17,-129.3,1.55)); +#371229 = CIRCLE('',#371230,0.139999827125); +#371230 = AXIS2_PLACEMENT_3D('',#371231,#371232,#371233); +#371231 = CARTESIAN_POINT('',(141.17000017287,-129.1600001728,1.55)); +#371232 = DIRECTION('',(0.,0.,-1.)); +#371233 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#371234 = ORIENTED_EDGE('',*,*,#371235,.F.); +#371235 = EDGE_CURVE('',#371236,#371227,#371238,.T.); +#371236 = VERTEX_POINT('',#371237); +#371237 = CARTESIAN_POINT('',(141.17,-129.3,1.51)); +#371238 = LINE('',#371239,#371240); +#371239 = CARTESIAN_POINT('',(141.17,-129.3,1.51)); +#371240 = VECTOR('',#371241,1.); +#371241 = DIRECTION('',(0.,0.,1.)); +#371242 = ORIENTED_EDGE('',*,*,#371243,.F.); +#371243 = EDGE_CURVE('',#371204,#371236,#371244,.T.); +#371244 = CIRCLE('',#371245,0.139999827125); +#371245 = AXIS2_PLACEMENT_3D('',#371246,#371247,#371248); +#371246 = CARTESIAN_POINT('',(141.17000017287,-129.1600001728,1.51)); +#371247 = DIRECTION('',(0.,0.,-1.)); +#371248 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#371249 = CYLINDRICAL_SURFACE('',#371250,0.139999827125); +#371250 = AXIS2_PLACEMENT_3D('',#371251,#371252,#371253); +#371251 = CARTESIAN_POINT('',(141.17000017287,-129.1600001728,1.51)); +#371252 = DIRECTION('',(0.,0.,-1.)); +#371253 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#371254 = ADVANCED_FACE('',(#371255),#371280,.T.); +#371255 = FACE_BOUND('',#371256,.T.); +#371256 = EDGE_LOOP('',(#371257,#371258,#371266,#371274)); +#371257 = ORIENTED_EDGE('',*,*,#371235,.T.); +#371258 = ORIENTED_EDGE('',*,*,#371259,.T.); +#371259 = EDGE_CURVE('',#371227,#371260,#371262,.T.); +#371260 = VERTEX_POINT('',#371261); +#371261 = CARTESIAN_POINT('',(140.83,-129.3,1.55)); +#371262 = LINE('',#371263,#371264); +#371263 = CARTESIAN_POINT('',(141.17,-129.3,1.55)); +#371264 = VECTOR('',#371265,1.); +#371265 = DIRECTION('',(-1.,0.,0.)); +#371266 = ORIENTED_EDGE('',*,*,#371267,.F.); +#371267 = EDGE_CURVE('',#371268,#371260,#371270,.T.); +#371268 = VERTEX_POINT('',#371269); +#371269 = CARTESIAN_POINT('',(140.83,-129.3,1.51)); +#371270 = LINE('',#371271,#371272); +#371271 = CARTESIAN_POINT('',(140.83,-129.3,1.51)); +#371272 = VECTOR('',#371273,1.); +#371273 = DIRECTION('',(0.,0.,1.)); +#371274 = ORIENTED_EDGE('',*,*,#371275,.F.); +#371275 = EDGE_CURVE('',#371236,#371268,#371276,.T.); +#371276 = LINE('',#371277,#371278); +#371277 = CARTESIAN_POINT('',(141.17,-129.3,1.51)); +#371278 = VECTOR('',#371279,1.); +#371279 = DIRECTION('',(-1.,0.,0.)); +#371280 = PLANE('',#371281); +#371281 = AXIS2_PLACEMENT_3D('',#371282,#371283,#371284); +#371282 = CARTESIAN_POINT('',(141.17,-129.3,1.51)); +#371283 = DIRECTION('',(0.,-1.,0.)); +#371284 = DIRECTION('',(-1.,0.,0.)); +#371285 = ADVANCED_FACE('',(#371286),#371313,.T.); +#371286 = FACE_BOUND('',#371287,.T.); +#371287 = EDGE_LOOP('',(#371288,#371289,#371298,#371306)); +#371288 = ORIENTED_EDGE('',*,*,#371267,.T.); +#371289 = ORIENTED_EDGE('',*,*,#371290,.T.); +#371290 = EDGE_CURVE('',#371260,#371291,#371293,.T.); +#371291 = VERTEX_POINT('',#371292); +#371292 = CARTESIAN_POINT('',(140.69,-129.16,1.55)); +#371293 = CIRCLE('',#371294,0.139999827125); +#371294 = AXIS2_PLACEMENT_3D('',#371295,#371296,#371297); +#371295 = CARTESIAN_POINT('',(140.82999982712,-129.1600001728,1.55)); +#371296 = DIRECTION('',(0.,0.,-1.)); +#371297 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#371298 = ORIENTED_EDGE('',*,*,#371299,.F.); +#371299 = EDGE_CURVE('',#371300,#371291,#371302,.T.); +#371300 = VERTEX_POINT('',#371301); +#371301 = CARTESIAN_POINT('',(140.69,-129.16,1.51)); +#371302 = LINE('',#371303,#371304); +#371303 = CARTESIAN_POINT('',(140.69,-129.16,1.51)); +#371304 = VECTOR('',#371305,1.); +#371305 = DIRECTION('',(0.,0.,1.)); +#371306 = ORIENTED_EDGE('',*,*,#371307,.F.); +#371307 = EDGE_CURVE('',#371268,#371300,#371308,.T.); +#371308 = CIRCLE('',#371309,0.139999827125); +#371309 = AXIS2_PLACEMENT_3D('',#371310,#371311,#371312); +#371310 = CARTESIAN_POINT('',(140.82999982712,-129.1600001728,1.51)); +#371311 = DIRECTION('',(0.,0.,-1.)); +#371312 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#371313 = CYLINDRICAL_SURFACE('',#371314,0.139999827125); +#371314 = AXIS2_PLACEMENT_3D('',#371315,#371316,#371317); +#371315 = CARTESIAN_POINT('',(140.82999982712,-129.1600001728,1.51)); +#371316 = DIRECTION('',(0.,0.,-1.)); +#371317 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#371318 = ADVANCED_FACE('',(#371319),#371335,.T.); +#371319 = FACE_BOUND('',#371320,.T.); +#371320 = EDGE_LOOP('',(#371321,#371322,#371328,#371329)); +#371321 = ORIENTED_EDGE('',*,*,#371299,.T.); +#371322 = ORIENTED_EDGE('',*,*,#371323,.T.); +#371323 = EDGE_CURVE('',#371291,#371091,#371324,.T.); +#371324 = LINE('',#371325,#371326); +#371325 = CARTESIAN_POINT('',(140.69,-129.16,1.55)); +#371326 = VECTOR('',#371327,1.); +#371327 = DIRECTION('',(0.,1.,0.)); +#371328 = ORIENTED_EDGE('',*,*,#371088,.F.); +#371329 = ORIENTED_EDGE('',*,*,#371330,.F.); +#371330 = EDGE_CURVE('',#371300,#371089,#371331,.T.); +#371331 = LINE('',#371332,#371333); +#371332 = CARTESIAN_POINT('',(140.69,-129.16,1.51)); +#371333 = VECTOR('',#371334,1.); +#371334 = DIRECTION('',(0.,1.,0.)); +#371335 = PLANE('',#371336); +#371336 = AXIS2_PLACEMENT_3D('',#371337,#371338,#371339); +#371337 = CARTESIAN_POINT('',(140.69,-129.16,1.51)); +#371338 = DIRECTION('',(-1.,0.,0.)); +#371339 = DIRECTION('',(0.,1.,0.)); +#371340 = ADVANCED_FACE('',(#371341),#371351,.F.); +#371341 = FACE_BOUND('',#371342,.T.); +#371342 = EDGE_LOOP('',(#371343,#371344,#371345,#371346,#371347,#371348, + #371349,#371350)); +#371343 = ORIENTED_EDGE('',*,*,#371115,.T.); +#371344 = ORIENTED_EDGE('',*,*,#371147,.T.); +#371345 = ORIENTED_EDGE('',*,*,#371179,.T.); +#371346 = ORIENTED_EDGE('',*,*,#371211,.T.); +#371347 = ORIENTED_EDGE('',*,*,#371243,.T.); +#371348 = ORIENTED_EDGE('',*,*,#371275,.T.); +#371349 = ORIENTED_EDGE('',*,*,#371307,.T.); +#371350 = ORIENTED_EDGE('',*,*,#371330,.T.); +#371351 = PLANE('',#371352); +#371352 = AXIS2_PLACEMENT_3D('',#371353,#371354,#371355); +#371353 = CARTESIAN_POINT('',(0.,0.,1.51)); +#371354 = DIRECTION('',(0.,0.,1.)); +#371355 = DIRECTION('',(1.,0.,-0.)); +#371356 = ADVANCED_FACE('',(#371357),#371367,.T.); +#371357 = FACE_BOUND('',#371358,.F.); +#371358 = EDGE_LOOP('',(#371359,#371360,#371361,#371362,#371363,#371364, + #371365,#371366)); +#371359 = ORIENTED_EDGE('',*,*,#371098,.T.); +#371360 = ORIENTED_EDGE('',*,*,#371131,.T.); +#371361 = ORIENTED_EDGE('',*,*,#371162,.T.); +#371362 = ORIENTED_EDGE('',*,*,#371195,.T.); +#371363 = ORIENTED_EDGE('',*,*,#371226,.T.); +#371364 = ORIENTED_EDGE('',*,*,#371259,.T.); +#371365 = ORIENTED_EDGE('',*,*,#371290,.T.); +#371366 = ORIENTED_EDGE('',*,*,#371323,.T.); +#371367 = PLANE('',#371368); +#371368 = AXIS2_PLACEMENT_3D('',#371369,#371370,#371371); +#371369 = CARTESIAN_POINT('',(0.,0.,1.55)); +#371370 = DIRECTION('',(0.,0.,1.)); +#371371 = DIRECTION('',(1.,0.,-0.)); +#371372 = MANIFOLD_SOLID_BREP('',#371373); +#371373 = CLOSED_SHELL('',(#371374,#371416,#371447,#371480,#371511, + #371544,#371575,#371608,#371630,#371646)); +#371374 = ADVANCED_FACE('',(#371375),#371411,.T.); +#371375 = FACE_BOUND('',#371376,.T.); +#371376 = EDGE_LOOP('',(#371377,#371387,#371396,#371404)); +#371377 = ORIENTED_EDGE('',*,*,#371378,.T.); +#371378 = EDGE_CURVE('',#371379,#371381,#371383,.T.); +#371379 = VERTEX_POINT('',#371380); +#371380 = CARTESIAN_POINT('',(126.11,-67.215,1.51)); +#371381 = VERTEX_POINT('',#371382); +#371382 = CARTESIAN_POINT('',(126.11,-67.215,1.55)); +#371383 = LINE('',#371384,#371385); +#371384 = CARTESIAN_POINT('',(126.11,-67.215,1.51)); +#371385 = VECTOR('',#371386,1.); +#371386 = DIRECTION('',(0.,0.,1.)); +#371387 = ORIENTED_EDGE('',*,*,#371388,.T.); +#371388 = EDGE_CURVE('',#371381,#371389,#371391,.T.); +#371389 = VERTEX_POINT('',#371390); +#371390 = CARTESIAN_POINT('',(126.245,-67.08,1.55)); +#371391 = CIRCLE('',#371392,0.135001418495); +#371392 = AXIS2_PLACEMENT_3D('',#371393,#371394,#371395); +#371393 = CARTESIAN_POINT('',(126.24500141848,-67.21500141848,1.55)); +#371394 = DIRECTION('',(0.,0.,-1.)); +#371395 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#371396 = ORIENTED_EDGE('',*,*,#371397,.F.); +#371397 = EDGE_CURVE('',#371398,#371389,#371400,.T.); +#371398 = VERTEX_POINT('',#371399); +#371399 = CARTESIAN_POINT('',(126.245,-67.08,1.51)); +#371400 = LINE('',#371401,#371402); +#371401 = CARTESIAN_POINT('',(126.245,-67.08,1.51)); +#371402 = VECTOR('',#371403,1.); +#371403 = DIRECTION('',(0.,0.,1.)); +#371404 = ORIENTED_EDGE('',*,*,#371405,.F.); +#371405 = EDGE_CURVE('',#371379,#371398,#371406,.T.); +#371406 = CIRCLE('',#371407,0.135001418495); +#371407 = AXIS2_PLACEMENT_3D('',#371408,#371409,#371410); +#371408 = CARTESIAN_POINT('',(126.24500141848,-67.21500141848,1.51)); +#371409 = DIRECTION('',(0.,0.,-1.)); +#371410 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#371411 = CYLINDRICAL_SURFACE('',#371412,0.135001418495); +#371412 = AXIS2_PLACEMENT_3D('',#371413,#371414,#371415); +#371413 = CARTESIAN_POINT('',(126.24500141848,-67.21500141848,1.51)); +#371414 = DIRECTION('',(0.,0.,-1.)); +#371415 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#371416 = ADVANCED_FACE('',(#371417),#371442,.T.); +#371417 = FACE_BOUND('',#371418,.T.); +#371418 = EDGE_LOOP('',(#371419,#371420,#371428,#371436)); +#371419 = ORIENTED_EDGE('',*,*,#371397,.T.); +#371420 = ORIENTED_EDGE('',*,*,#371421,.T.); +#371421 = EDGE_CURVE('',#371389,#371422,#371424,.T.); +#371422 = VERTEX_POINT('',#371423); +#371423 = CARTESIAN_POINT('',(126.515,-67.08,1.55)); +#371424 = LINE('',#371425,#371426); +#371425 = CARTESIAN_POINT('',(126.245,-67.08,1.55)); +#371426 = VECTOR('',#371427,1.); +#371427 = DIRECTION('',(1.,0.,0.)); +#371428 = ORIENTED_EDGE('',*,*,#371429,.F.); +#371429 = EDGE_CURVE('',#371430,#371422,#371432,.T.); +#371430 = VERTEX_POINT('',#371431); +#371431 = CARTESIAN_POINT('',(126.515,-67.08,1.51)); +#371432 = LINE('',#371433,#371434); +#371433 = CARTESIAN_POINT('',(126.515,-67.08,1.51)); +#371434 = VECTOR('',#371435,1.); +#371435 = DIRECTION('',(0.,0.,1.)); +#371436 = ORIENTED_EDGE('',*,*,#371437,.F.); +#371437 = EDGE_CURVE('',#371398,#371430,#371438,.T.); +#371438 = LINE('',#371439,#371440); +#371439 = CARTESIAN_POINT('',(126.245,-67.08,1.51)); +#371440 = VECTOR('',#371441,1.); +#371441 = DIRECTION('',(1.,0.,0.)); +#371442 = PLANE('',#371443); +#371443 = AXIS2_PLACEMENT_3D('',#371444,#371445,#371446); +#371444 = CARTESIAN_POINT('',(126.245,-67.08,1.51)); +#371445 = DIRECTION('',(0.,1.,0.)); +#371446 = DIRECTION('',(1.,0.,0.)); +#371447 = ADVANCED_FACE('',(#371448),#371475,.T.); +#371448 = FACE_BOUND('',#371449,.T.); +#371449 = EDGE_LOOP('',(#371450,#371451,#371460,#371468)); +#371450 = ORIENTED_EDGE('',*,*,#371429,.T.); +#371451 = ORIENTED_EDGE('',*,*,#371452,.T.); +#371452 = EDGE_CURVE('',#371422,#371453,#371455,.T.); +#371453 = VERTEX_POINT('',#371454); +#371454 = CARTESIAN_POINT('',(126.65,-67.215,1.55)); +#371455 = CIRCLE('',#371456,0.135001418495); +#371456 = AXIS2_PLACEMENT_3D('',#371457,#371458,#371459); +#371457 = CARTESIAN_POINT('',(126.51499858151,-67.21500141848,1.55)); +#371458 = DIRECTION('',(0.,0.,-1.)); +#371459 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#371460 = ORIENTED_EDGE('',*,*,#371461,.F.); +#371461 = EDGE_CURVE('',#371462,#371453,#371464,.T.); +#371462 = VERTEX_POINT('',#371463); +#371463 = CARTESIAN_POINT('',(126.65,-67.215,1.51)); +#371464 = LINE('',#371465,#371466); +#371465 = CARTESIAN_POINT('',(126.65,-67.215,1.51)); +#371466 = VECTOR('',#371467,1.); +#371467 = DIRECTION('',(0.,0.,1.)); +#371468 = ORIENTED_EDGE('',*,*,#371469,.F.); +#371469 = EDGE_CURVE('',#371430,#371462,#371470,.T.); +#371470 = CIRCLE('',#371471,0.135001418495); +#371471 = AXIS2_PLACEMENT_3D('',#371472,#371473,#371474); +#371472 = CARTESIAN_POINT('',(126.51499858151,-67.21500141848,1.51)); +#371473 = DIRECTION('',(0.,0.,-1.)); +#371474 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#371475 = CYLINDRICAL_SURFACE('',#371476,0.135001418495); +#371476 = AXIS2_PLACEMENT_3D('',#371477,#371478,#371479); +#371477 = CARTESIAN_POINT('',(126.51499858151,-67.21500141848,1.51)); +#371478 = DIRECTION('',(0.,0.,-1.)); +#371479 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#371480 = ADVANCED_FACE('',(#371481),#371506,.T.); +#371481 = FACE_BOUND('',#371482,.T.); +#371482 = EDGE_LOOP('',(#371483,#371484,#371492,#371500)); +#371483 = ORIENTED_EDGE('',*,*,#371461,.T.); +#371484 = ORIENTED_EDGE('',*,*,#371485,.T.); +#371485 = EDGE_CURVE('',#371453,#371486,#371488,.T.); +#371486 = VERTEX_POINT('',#371487); +#371487 = CARTESIAN_POINT('',(126.65,-67.585,1.55)); +#371488 = LINE('',#371489,#371490); +#371489 = CARTESIAN_POINT('',(126.65,-67.215,1.55)); +#371490 = VECTOR('',#371491,1.); +#371491 = DIRECTION('',(0.,-1.,0.)); +#371492 = ORIENTED_EDGE('',*,*,#371493,.F.); +#371493 = EDGE_CURVE('',#371494,#371486,#371496,.T.); +#371494 = VERTEX_POINT('',#371495); +#371495 = CARTESIAN_POINT('',(126.65,-67.585,1.51)); +#371496 = LINE('',#371497,#371498); +#371497 = CARTESIAN_POINT('',(126.65,-67.585,1.51)); +#371498 = VECTOR('',#371499,1.); +#371499 = DIRECTION('',(0.,0.,1.)); +#371500 = ORIENTED_EDGE('',*,*,#371501,.F.); +#371501 = EDGE_CURVE('',#371462,#371494,#371502,.T.); +#371502 = LINE('',#371503,#371504); +#371503 = CARTESIAN_POINT('',(126.65,-67.215,1.51)); +#371504 = VECTOR('',#371505,1.); +#371505 = DIRECTION('',(0.,-1.,0.)); +#371506 = PLANE('',#371507); +#371507 = AXIS2_PLACEMENT_3D('',#371508,#371509,#371510); +#371508 = CARTESIAN_POINT('',(126.65,-67.215,1.51)); +#371509 = DIRECTION('',(1.,0.,-0.)); +#371510 = DIRECTION('',(0.,-1.,0.)); +#371511 = ADVANCED_FACE('',(#371512),#371539,.T.); +#371512 = FACE_BOUND('',#371513,.T.); +#371513 = EDGE_LOOP('',(#371514,#371515,#371524,#371532)); +#371514 = ORIENTED_EDGE('',*,*,#371493,.T.); +#371515 = ORIENTED_EDGE('',*,*,#371516,.T.); +#371516 = EDGE_CURVE('',#371486,#371517,#371519,.T.); +#371517 = VERTEX_POINT('',#371518); +#371518 = CARTESIAN_POINT('',(126.515,-67.72,1.55)); +#371519 = CIRCLE('',#371520,0.135001418495); +#371520 = AXIS2_PLACEMENT_3D('',#371521,#371522,#371523); +#371521 = CARTESIAN_POINT('',(126.51499858151,-67.58499858151,1.55)); +#371522 = DIRECTION('',(0.,0.,-1.)); +#371523 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#371524 = ORIENTED_EDGE('',*,*,#371525,.F.); +#371525 = EDGE_CURVE('',#371526,#371517,#371528,.T.); +#371526 = VERTEX_POINT('',#371527); +#371527 = CARTESIAN_POINT('',(126.515,-67.72,1.51)); +#371528 = LINE('',#371529,#371530); +#371529 = CARTESIAN_POINT('',(126.515,-67.72,1.51)); +#371530 = VECTOR('',#371531,1.); +#371531 = DIRECTION('',(0.,0.,1.)); +#371532 = ORIENTED_EDGE('',*,*,#371533,.F.); +#371533 = EDGE_CURVE('',#371494,#371526,#371534,.T.); +#371534 = CIRCLE('',#371535,0.135001418495); +#371535 = AXIS2_PLACEMENT_3D('',#371536,#371537,#371538); +#371536 = CARTESIAN_POINT('',(126.51499858151,-67.58499858151,1.51)); +#371537 = DIRECTION('',(0.,0.,-1.)); +#371538 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#371539 = CYLINDRICAL_SURFACE('',#371540,0.135001418495); +#371540 = AXIS2_PLACEMENT_3D('',#371541,#371542,#371543); +#371541 = CARTESIAN_POINT('',(126.51499858151,-67.58499858151,1.51)); +#371542 = DIRECTION('',(0.,0.,-1.)); +#371543 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#371544 = ADVANCED_FACE('',(#371545),#371570,.T.); +#371545 = FACE_BOUND('',#371546,.T.); +#371546 = EDGE_LOOP('',(#371547,#371548,#371556,#371564)); +#371547 = ORIENTED_EDGE('',*,*,#371525,.T.); +#371548 = ORIENTED_EDGE('',*,*,#371549,.T.); +#371549 = EDGE_CURVE('',#371517,#371550,#371552,.T.); +#371550 = VERTEX_POINT('',#371551); +#371551 = CARTESIAN_POINT('',(126.245,-67.72,1.55)); +#371552 = LINE('',#371553,#371554); +#371553 = CARTESIAN_POINT('',(126.515,-67.72,1.55)); +#371554 = VECTOR('',#371555,1.); +#371555 = DIRECTION('',(-1.,0.,0.)); +#371556 = ORIENTED_EDGE('',*,*,#371557,.F.); +#371557 = EDGE_CURVE('',#371558,#371550,#371560,.T.); +#371558 = VERTEX_POINT('',#371559); +#371559 = CARTESIAN_POINT('',(126.245,-67.72,1.51)); +#371560 = LINE('',#371561,#371562); +#371561 = CARTESIAN_POINT('',(126.245,-67.72,1.51)); +#371562 = VECTOR('',#371563,1.); +#371563 = DIRECTION('',(0.,0.,1.)); +#371564 = ORIENTED_EDGE('',*,*,#371565,.F.); +#371565 = EDGE_CURVE('',#371526,#371558,#371566,.T.); +#371566 = LINE('',#371567,#371568); +#371567 = CARTESIAN_POINT('',(126.515,-67.72,1.51)); +#371568 = VECTOR('',#371569,1.); +#371569 = DIRECTION('',(-1.,0.,0.)); +#371570 = PLANE('',#371571); +#371571 = AXIS2_PLACEMENT_3D('',#371572,#371573,#371574); +#371572 = CARTESIAN_POINT('',(126.515,-67.72,1.51)); +#371573 = DIRECTION('',(0.,-1.,0.)); +#371574 = DIRECTION('',(-1.,0.,0.)); +#371575 = ADVANCED_FACE('',(#371576),#371603,.T.); +#371576 = FACE_BOUND('',#371577,.T.); +#371577 = EDGE_LOOP('',(#371578,#371579,#371588,#371596)); +#371578 = ORIENTED_EDGE('',*,*,#371557,.T.); +#371579 = ORIENTED_EDGE('',*,*,#371580,.T.); +#371580 = EDGE_CURVE('',#371550,#371581,#371583,.T.); +#371581 = VERTEX_POINT('',#371582); +#371582 = CARTESIAN_POINT('',(126.11,-67.585,1.55)); +#371583 = CIRCLE('',#371584,0.135001418495); +#371584 = AXIS2_PLACEMENT_3D('',#371585,#371586,#371587); +#371585 = CARTESIAN_POINT('',(126.24500141848,-67.58499858151,1.55)); +#371586 = DIRECTION('',(0.,0.,-1.)); +#371587 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#371588 = ORIENTED_EDGE('',*,*,#371589,.F.); +#371589 = EDGE_CURVE('',#371590,#371581,#371592,.T.); +#371590 = VERTEX_POINT('',#371591); +#371591 = CARTESIAN_POINT('',(126.11,-67.585,1.51)); +#371592 = LINE('',#371593,#371594); +#371593 = CARTESIAN_POINT('',(126.11,-67.585,1.51)); +#371594 = VECTOR('',#371595,1.); +#371595 = DIRECTION('',(0.,0.,1.)); +#371596 = ORIENTED_EDGE('',*,*,#371597,.F.); +#371597 = EDGE_CURVE('',#371558,#371590,#371598,.T.); +#371598 = CIRCLE('',#371599,0.135001418495); +#371599 = AXIS2_PLACEMENT_3D('',#371600,#371601,#371602); +#371600 = CARTESIAN_POINT('',(126.24500141848,-67.58499858151,1.51)); +#371601 = DIRECTION('',(0.,0.,-1.)); +#371602 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#371603 = CYLINDRICAL_SURFACE('',#371604,0.135001418495); +#371604 = AXIS2_PLACEMENT_3D('',#371605,#371606,#371607); +#371605 = CARTESIAN_POINT('',(126.24500141848,-67.58499858151,1.51)); +#371606 = DIRECTION('',(0.,0.,-1.)); +#371607 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#371608 = ADVANCED_FACE('',(#371609),#371625,.T.); +#371609 = FACE_BOUND('',#371610,.T.); +#371610 = EDGE_LOOP('',(#371611,#371612,#371618,#371619)); +#371611 = ORIENTED_EDGE('',*,*,#371589,.T.); +#371612 = ORIENTED_EDGE('',*,*,#371613,.T.); +#371613 = EDGE_CURVE('',#371581,#371381,#371614,.T.); +#371614 = LINE('',#371615,#371616); +#371615 = CARTESIAN_POINT('',(126.11,-67.585,1.55)); +#371616 = VECTOR('',#371617,1.); +#371617 = DIRECTION('',(0.,1.,0.)); +#371618 = ORIENTED_EDGE('',*,*,#371378,.F.); +#371619 = ORIENTED_EDGE('',*,*,#371620,.F.); +#371620 = EDGE_CURVE('',#371590,#371379,#371621,.T.); +#371621 = LINE('',#371622,#371623); +#371622 = CARTESIAN_POINT('',(126.11,-67.585,1.51)); +#371623 = VECTOR('',#371624,1.); +#371624 = DIRECTION('',(0.,1.,0.)); +#371625 = PLANE('',#371626); +#371626 = AXIS2_PLACEMENT_3D('',#371627,#371628,#371629); +#371627 = CARTESIAN_POINT('',(126.11,-67.585,1.51)); +#371628 = DIRECTION('',(-1.,0.,0.)); +#371629 = DIRECTION('',(0.,1.,0.)); +#371630 = ADVANCED_FACE('',(#371631),#371641,.F.); +#371631 = FACE_BOUND('',#371632,.T.); +#371632 = EDGE_LOOP('',(#371633,#371634,#371635,#371636,#371637,#371638, + #371639,#371640)); +#371633 = ORIENTED_EDGE('',*,*,#371405,.T.); +#371634 = ORIENTED_EDGE('',*,*,#371437,.T.); +#371635 = ORIENTED_EDGE('',*,*,#371469,.T.); +#371636 = ORIENTED_EDGE('',*,*,#371501,.T.); +#371637 = ORIENTED_EDGE('',*,*,#371533,.T.); +#371638 = ORIENTED_EDGE('',*,*,#371565,.T.); +#371639 = ORIENTED_EDGE('',*,*,#371597,.T.); +#371640 = ORIENTED_EDGE('',*,*,#371620,.T.); +#371641 = PLANE('',#371642); +#371642 = AXIS2_PLACEMENT_3D('',#371643,#371644,#371645); +#371643 = CARTESIAN_POINT('',(0.,0.,1.51)); +#371644 = DIRECTION('',(0.,0.,1.)); +#371645 = DIRECTION('',(1.,0.,-0.)); +#371646 = ADVANCED_FACE('',(#371647),#371657,.T.); +#371647 = FACE_BOUND('',#371648,.F.); +#371648 = EDGE_LOOP('',(#371649,#371650,#371651,#371652,#371653,#371654, + #371655,#371656)); +#371649 = ORIENTED_EDGE('',*,*,#371388,.T.); +#371650 = ORIENTED_EDGE('',*,*,#371421,.T.); +#371651 = ORIENTED_EDGE('',*,*,#371452,.T.); +#371652 = ORIENTED_EDGE('',*,*,#371485,.T.); +#371653 = ORIENTED_EDGE('',*,*,#371516,.T.); +#371654 = ORIENTED_EDGE('',*,*,#371549,.T.); +#371655 = ORIENTED_EDGE('',*,*,#371580,.T.); +#371656 = ORIENTED_EDGE('',*,*,#371613,.T.); +#371657 = PLANE('',#371658); +#371658 = AXIS2_PLACEMENT_3D('',#371659,#371660,#371661); +#371659 = CARTESIAN_POINT('',(0.,0.,1.55)); +#371660 = DIRECTION('',(0.,0.,1.)); +#371661 = DIRECTION('',(1.,0.,-0.)); +#371662 = MANIFOLD_SOLID_BREP('',#371663); +#371663 = CLOSED_SHELL('',(#371664,#371704,#371735,#371766,#371788, + #371800)); +#371664 = ADVANCED_FACE('',(#371665),#371699,.T.); +#371665 = FACE_BOUND('',#371666,.T.); +#371666 = EDGE_LOOP('',(#371667,#371677,#371685,#371693)); +#371667 = ORIENTED_EDGE('',*,*,#371668,.T.); +#371668 = EDGE_CURVE('',#371669,#371671,#371673,.T.); +#371669 = VERTEX_POINT('',#371670); +#371670 = CARTESIAN_POINT('',(128.5,-66.37,1.51)); +#371671 = VERTEX_POINT('',#371672); +#371672 = CARTESIAN_POINT('',(128.5,-66.37,1.55)); +#371673 = LINE('',#371674,#371675); +#371674 = CARTESIAN_POINT('',(128.5,-66.37,1.51)); +#371675 = VECTOR('',#371676,1.); +#371676 = DIRECTION('',(0.,0.,1.)); +#371677 = ORIENTED_EDGE('',*,*,#371678,.T.); +#371678 = EDGE_CURVE('',#371671,#371679,#371681,.T.); +#371679 = VERTEX_POINT('',#371680); +#371680 = CARTESIAN_POINT('',(128.5,-65.47,1.55)); +#371681 = LINE('',#371682,#371683); +#371682 = CARTESIAN_POINT('',(128.5,-66.37,1.55)); +#371683 = VECTOR('',#371684,1.); +#371684 = DIRECTION('',(0.,1.,0.)); +#371685 = ORIENTED_EDGE('',*,*,#371686,.F.); +#371686 = EDGE_CURVE('',#371687,#371679,#371689,.T.); +#371687 = VERTEX_POINT('',#371688); +#371688 = CARTESIAN_POINT('',(128.5,-65.47,1.51)); +#371689 = LINE('',#371690,#371691); +#371690 = CARTESIAN_POINT('',(128.5,-65.47,1.51)); +#371691 = VECTOR('',#371692,1.); +#371692 = DIRECTION('',(0.,0.,1.)); +#371693 = ORIENTED_EDGE('',*,*,#371694,.F.); +#371694 = EDGE_CURVE('',#371669,#371687,#371695,.T.); +#371695 = LINE('',#371696,#371697); +#371696 = CARTESIAN_POINT('',(128.5,-66.37,1.51)); +#371697 = VECTOR('',#371698,1.); +#371698 = DIRECTION('',(0.,1.,0.)); +#371699 = PLANE('',#371700); +#371700 = AXIS2_PLACEMENT_3D('',#371701,#371702,#371703); +#371701 = CARTESIAN_POINT('',(128.5,-66.37,1.51)); +#371702 = DIRECTION('',(-1.,0.,0.)); +#371703 = DIRECTION('',(0.,1.,0.)); +#371704 = ADVANCED_FACE('',(#371705),#371730,.T.); +#371705 = FACE_BOUND('',#371706,.T.); +#371706 = EDGE_LOOP('',(#371707,#371708,#371716,#371724)); +#371707 = ORIENTED_EDGE('',*,*,#371686,.T.); +#371708 = ORIENTED_EDGE('',*,*,#371709,.T.); +#371709 = EDGE_CURVE('',#371679,#371710,#371712,.T.); +#371710 = VERTEX_POINT('',#371711); +#371711 = CARTESIAN_POINT('',(130.,-65.47,1.55)); +#371712 = LINE('',#371713,#371714); +#371713 = CARTESIAN_POINT('',(128.5,-65.47,1.55)); +#371714 = VECTOR('',#371715,1.); +#371715 = DIRECTION('',(1.,0.,0.)); +#371716 = ORIENTED_EDGE('',*,*,#371717,.F.); +#371717 = EDGE_CURVE('',#371718,#371710,#371720,.T.); +#371718 = VERTEX_POINT('',#371719); +#371719 = CARTESIAN_POINT('',(130.,-65.47,1.51)); +#371720 = LINE('',#371721,#371722); +#371721 = CARTESIAN_POINT('',(130.,-65.47,1.51)); +#371722 = VECTOR('',#371723,1.); +#371723 = DIRECTION('',(0.,0.,1.)); +#371724 = ORIENTED_EDGE('',*,*,#371725,.F.); +#371725 = EDGE_CURVE('',#371687,#371718,#371726,.T.); +#371726 = LINE('',#371727,#371728); +#371727 = CARTESIAN_POINT('',(128.5,-65.47,1.51)); +#371728 = VECTOR('',#371729,1.); +#371729 = DIRECTION('',(1.,0.,0.)); +#371730 = PLANE('',#371731); +#371731 = AXIS2_PLACEMENT_3D('',#371732,#371733,#371734); +#371732 = CARTESIAN_POINT('',(128.5,-65.47,1.51)); +#371733 = DIRECTION('',(0.,1.,0.)); +#371734 = DIRECTION('',(1.,0.,0.)); +#371735 = ADVANCED_FACE('',(#371736),#371761,.T.); +#371736 = FACE_BOUND('',#371737,.T.); +#371737 = EDGE_LOOP('',(#371738,#371739,#371747,#371755)); +#371738 = ORIENTED_EDGE('',*,*,#371717,.T.); +#371739 = ORIENTED_EDGE('',*,*,#371740,.T.); +#371740 = EDGE_CURVE('',#371710,#371741,#371743,.T.); +#371741 = VERTEX_POINT('',#371742); +#371742 = CARTESIAN_POINT('',(130.,-66.37,1.55)); +#371743 = LINE('',#371744,#371745); +#371744 = CARTESIAN_POINT('',(130.,-65.47,1.55)); +#371745 = VECTOR('',#371746,1.); +#371746 = DIRECTION('',(0.,-1.,0.)); +#371747 = ORIENTED_EDGE('',*,*,#371748,.F.); +#371748 = EDGE_CURVE('',#371749,#371741,#371751,.T.); +#371749 = VERTEX_POINT('',#371750); +#371750 = CARTESIAN_POINT('',(130.,-66.37,1.51)); +#371751 = LINE('',#371752,#371753); +#371752 = CARTESIAN_POINT('',(130.,-66.37,1.51)); +#371753 = VECTOR('',#371754,1.); +#371754 = DIRECTION('',(0.,0.,1.)); +#371755 = ORIENTED_EDGE('',*,*,#371756,.F.); +#371756 = EDGE_CURVE('',#371718,#371749,#371757,.T.); +#371757 = LINE('',#371758,#371759); +#371758 = CARTESIAN_POINT('',(130.,-65.47,1.51)); +#371759 = VECTOR('',#371760,1.); +#371760 = DIRECTION('',(0.,-1.,0.)); +#371761 = PLANE('',#371762); +#371762 = AXIS2_PLACEMENT_3D('',#371763,#371764,#371765); +#371763 = CARTESIAN_POINT('',(130.,-65.47,1.51)); +#371764 = DIRECTION('',(1.,0.,-0.)); +#371765 = DIRECTION('',(0.,-1.,0.)); +#371766 = ADVANCED_FACE('',(#371767),#371783,.T.); +#371767 = FACE_BOUND('',#371768,.T.); +#371768 = EDGE_LOOP('',(#371769,#371770,#371776,#371777)); +#371769 = ORIENTED_EDGE('',*,*,#371748,.T.); +#371770 = ORIENTED_EDGE('',*,*,#371771,.T.); +#371771 = EDGE_CURVE('',#371741,#371671,#371772,.T.); +#371772 = LINE('',#371773,#371774); +#371773 = CARTESIAN_POINT('',(130.,-66.37,1.55)); +#371774 = VECTOR('',#371775,1.); +#371775 = DIRECTION('',(-1.,0.,0.)); +#371776 = ORIENTED_EDGE('',*,*,#371668,.F.); +#371777 = ORIENTED_EDGE('',*,*,#371778,.F.); +#371778 = EDGE_CURVE('',#371749,#371669,#371779,.T.); +#371779 = LINE('',#371780,#371781); +#371780 = CARTESIAN_POINT('',(130.,-66.37,1.51)); +#371781 = VECTOR('',#371782,1.); +#371782 = DIRECTION('',(-1.,0.,0.)); +#371783 = PLANE('',#371784); +#371784 = AXIS2_PLACEMENT_3D('',#371785,#371786,#371787); +#371785 = CARTESIAN_POINT('',(130.,-66.37,1.51)); +#371786 = DIRECTION('',(0.,-1.,0.)); +#371787 = DIRECTION('',(-1.,0.,0.)); +#371788 = ADVANCED_FACE('',(#371789),#371795,.F.); +#371789 = FACE_BOUND('',#371790,.T.); +#371790 = EDGE_LOOP('',(#371791,#371792,#371793,#371794)); +#371791 = ORIENTED_EDGE('',*,*,#371694,.T.); +#371792 = ORIENTED_EDGE('',*,*,#371725,.T.); +#371793 = ORIENTED_EDGE('',*,*,#371756,.T.); +#371794 = ORIENTED_EDGE('',*,*,#371778,.T.); +#371795 = PLANE('',#371796); +#371796 = AXIS2_PLACEMENT_3D('',#371797,#371798,#371799); +#371797 = CARTESIAN_POINT('',(0.,0.,1.51)); +#371798 = DIRECTION('',(0.,0.,1.)); +#371799 = DIRECTION('',(1.,0.,-0.)); +#371800 = ADVANCED_FACE('',(#371801),#371807,.T.); +#371801 = FACE_BOUND('',#371802,.F.); +#371802 = EDGE_LOOP('',(#371803,#371804,#371805,#371806)); +#371803 = ORIENTED_EDGE('',*,*,#371678,.T.); +#371804 = ORIENTED_EDGE('',*,*,#371709,.T.); +#371805 = ORIENTED_EDGE('',*,*,#371740,.T.); +#371806 = ORIENTED_EDGE('',*,*,#371771,.T.); +#371807 = PLANE('',#371808); +#371808 = AXIS2_PLACEMENT_3D('',#371809,#371810,#371811); +#371809 = CARTESIAN_POINT('',(0.,0.,1.55)); +#371810 = DIRECTION('',(0.,0.,1.)); +#371811 = DIRECTION('',(1.,0.,-0.)); +#371812 = MANIFOLD_SOLID_BREP('',#371813); +#371813 = CLOSED_SHELL('',(#371814,#371856,#371887,#371920,#371951, + #371984,#372015,#372048,#372070,#372086)); +#371814 = ADVANCED_FACE('',(#371815),#371851,.T.); +#371815 = FACE_BOUND('',#371816,.T.); +#371816 = EDGE_LOOP('',(#371817,#371827,#371836,#371844)); +#371817 = ORIENTED_EDGE('',*,*,#371818,.T.); +#371818 = EDGE_CURVE('',#371819,#371821,#371823,.T.); +#371819 = VERTEX_POINT('',#371820); +#371820 = CARTESIAN_POINT('',(143.45,-155.4,1.51)); +#371821 = VERTEX_POINT('',#371822); +#371822 = CARTESIAN_POINT('',(143.45,-155.4,1.55)); +#371823 = LINE('',#371824,#371825); +#371824 = CARTESIAN_POINT('',(143.45,-155.4,1.51)); +#371825 = VECTOR('',#371826,1.); +#371826 = DIRECTION('',(0.,0.,1.)); +#371827 = ORIENTED_EDGE('',*,*,#371828,.T.); +#371828 = EDGE_CURVE('',#371821,#371829,#371831,.T.); +#371829 = VERTEX_POINT('',#371830); +#371830 = CARTESIAN_POINT('',(143.6,-155.25,1.55)); +#371831 = CIRCLE('',#371832,0.150000058649); +#371832 = AXIS2_PLACEMENT_3D('',#371833,#371834,#371835); +#371833 = CARTESIAN_POINT('',(143.60000005864,-155.4000000586,1.55)); +#371834 = DIRECTION('',(0.,0.,-1.)); +#371835 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#371836 = ORIENTED_EDGE('',*,*,#371837,.F.); +#371837 = EDGE_CURVE('',#371838,#371829,#371840,.T.); +#371838 = VERTEX_POINT('',#371839); +#371839 = CARTESIAN_POINT('',(143.6,-155.25,1.51)); +#371840 = LINE('',#371841,#371842); +#371841 = CARTESIAN_POINT('',(143.6,-155.25,1.51)); +#371842 = VECTOR('',#371843,1.); +#371843 = DIRECTION('',(0.,0.,1.)); +#371844 = ORIENTED_EDGE('',*,*,#371845,.F.); +#371845 = EDGE_CURVE('',#371819,#371838,#371846,.T.); +#371846 = CIRCLE('',#371847,0.150000058649); +#371847 = AXIS2_PLACEMENT_3D('',#371848,#371849,#371850); +#371848 = CARTESIAN_POINT('',(143.60000005864,-155.4000000586,1.51)); +#371849 = DIRECTION('',(0.,0.,-1.)); +#371850 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#371851 = CYLINDRICAL_SURFACE('',#371852,0.150000058649); +#371852 = AXIS2_PLACEMENT_3D('',#371853,#371854,#371855); +#371853 = CARTESIAN_POINT('',(143.60000005864,-155.4000000586,1.51)); +#371854 = DIRECTION('',(0.,0.,-1.)); +#371855 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#371856 = ADVANCED_FACE('',(#371857),#371882,.T.); +#371857 = FACE_BOUND('',#371858,.T.); +#371858 = EDGE_LOOP('',(#371859,#371860,#371868,#371876)); +#371859 = ORIENTED_EDGE('',*,*,#371837,.T.); +#371860 = ORIENTED_EDGE('',*,*,#371861,.T.); +#371861 = EDGE_CURVE('',#371829,#371862,#371864,.T.); +#371862 = VERTEX_POINT('',#371863); +#371863 = CARTESIAN_POINT('',(144.8,-155.25,1.55)); +#371864 = LINE('',#371865,#371866); +#371865 = CARTESIAN_POINT('',(143.6,-155.25,1.55)); +#371866 = VECTOR('',#371867,1.); +#371867 = DIRECTION('',(1.,0.,0.)); +#371868 = ORIENTED_EDGE('',*,*,#371869,.F.); +#371869 = EDGE_CURVE('',#371870,#371862,#371872,.T.); +#371870 = VERTEX_POINT('',#371871); +#371871 = CARTESIAN_POINT('',(144.8,-155.25,1.51)); +#371872 = LINE('',#371873,#371874); +#371873 = CARTESIAN_POINT('',(144.8,-155.25,1.51)); +#371874 = VECTOR('',#371875,1.); +#371875 = DIRECTION('',(0.,0.,1.)); +#371876 = ORIENTED_EDGE('',*,*,#371877,.F.); +#371877 = EDGE_CURVE('',#371838,#371870,#371878,.T.); +#371878 = LINE('',#371879,#371880); +#371879 = CARTESIAN_POINT('',(143.6,-155.25,1.51)); +#371880 = VECTOR('',#371881,1.); +#371881 = DIRECTION('',(1.,0.,0.)); +#371882 = PLANE('',#371883); +#371883 = AXIS2_PLACEMENT_3D('',#371884,#371885,#371886); +#371884 = CARTESIAN_POINT('',(143.6,-155.25,1.51)); +#371885 = DIRECTION('',(0.,1.,0.)); +#371886 = DIRECTION('',(1.,0.,0.)); +#371887 = ADVANCED_FACE('',(#371888),#371915,.T.); +#371888 = FACE_BOUND('',#371889,.T.); +#371889 = EDGE_LOOP('',(#371890,#371891,#371900,#371908)); +#371890 = ORIENTED_EDGE('',*,*,#371869,.T.); +#371891 = ORIENTED_EDGE('',*,*,#371892,.T.); +#371892 = EDGE_CURVE('',#371862,#371893,#371895,.T.); +#371893 = VERTEX_POINT('',#371894); +#371894 = CARTESIAN_POINT('',(144.95,-155.4,1.55)); +#371895 = CIRCLE('',#371896,0.150000058649); +#371896 = AXIS2_PLACEMENT_3D('',#371897,#371898,#371899); +#371897 = CARTESIAN_POINT('',(144.79999994135,-155.4000000586,1.55)); +#371898 = DIRECTION('',(0.,0.,-1.)); +#371899 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#371900 = ORIENTED_EDGE('',*,*,#371901,.F.); +#371901 = EDGE_CURVE('',#371902,#371893,#371904,.T.); +#371902 = VERTEX_POINT('',#371903); +#371903 = CARTESIAN_POINT('',(144.95,-155.4,1.51)); +#371904 = LINE('',#371905,#371906); +#371905 = CARTESIAN_POINT('',(144.95,-155.4,1.51)); +#371906 = VECTOR('',#371907,1.); +#371907 = DIRECTION('',(0.,0.,1.)); +#371908 = ORIENTED_EDGE('',*,*,#371909,.F.); +#371909 = EDGE_CURVE('',#371870,#371902,#371910,.T.); +#371910 = CIRCLE('',#371911,0.150000058649); +#371911 = AXIS2_PLACEMENT_3D('',#371912,#371913,#371914); +#371912 = CARTESIAN_POINT('',(144.79999994135,-155.4000000586,1.51)); +#371913 = DIRECTION('',(0.,0.,-1.)); +#371914 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#371915 = CYLINDRICAL_SURFACE('',#371916,0.150000058649); +#371916 = AXIS2_PLACEMENT_3D('',#371917,#371918,#371919); +#371917 = CARTESIAN_POINT('',(144.79999994135,-155.4000000586,1.51)); +#371918 = DIRECTION('',(0.,0.,-1.)); +#371919 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#371920 = ADVANCED_FACE('',(#371921),#371946,.T.); +#371921 = FACE_BOUND('',#371922,.T.); +#371922 = EDGE_LOOP('',(#371923,#371924,#371932,#371940)); +#371923 = ORIENTED_EDGE('',*,*,#371901,.T.); +#371924 = ORIENTED_EDGE('',*,*,#371925,.T.); +#371925 = EDGE_CURVE('',#371893,#371926,#371928,.T.); +#371926 = VERTEX_POINT('',#371927); +#371927 = CARTESIAN_POINT('',(144.95,-156.1,1.55)); +#371928 = LINE('',#371929,#371930); +#371929 = CARTESIAN_POINT('',(144.95,-155.4,1.55)); +#371930 = VECTOR('',#371931,1.); +#371931 = DIRECTION('',(0.,-1.,0.)); +#371932 = ORIENTED_EDGE('',*,*,#371933,.F.); +#371933 = EDGE_CURVE('',#371934,#371926,#371936,.T.); +#371934 = VERTEX_POINT('',#371935); +#371935 = CARTESIAN_POINT('',(144.95,-156.1,1.51)); +#371936 = LINE('',#371937,#371938); +#371937 = CARTESIAN_POINT('',(144.95,-156.1,1.51)); +#371938 = VECTOR('',#371939,1.); +#371939 = DIRECTION('',(0.,0.,1.)); +#371940 = ORIENTED_EDGE('',*,*,#371941,.F.); +#371941 = EDGE_CURVE('',#371902,#371934,#371942,.T.); +#371942 = LINE('',#371943,#371944); +#371943 = CARTESIAN_POINT('',(144.95,-155.4,1.51)); +#371944 = VECTOR('',#371945,1.); +#371945 = DIRECTION('',(0.,-1.,0.)); +#371946 = PLANE('',#371947); +#371947 = AXIS2_PLACEMENT_3D('',#371948,#371949,#371950); +#371948 = CARTESIAN_POINT('',(144.95,-155.4,1.51)); +#371949 = DIRECTION('',(1.,0.,-0.)); +#371950 = DIRECTION('',(0.,-1.,0.)); +#371951 = ADVANCED_FACE('',(#371952),#371979,.T.); +#371952 = FACE_BOUND('',#371953,.T.); +#371953 = EDGE_LOOP('',(#371954,#371955,#371964,#371972)); +#371954 = ORIENTED_EDGE('',*,*,#371933,.T.); +#371955 = ORIENTED_EDGE('',*,*,#371956,.T.); +#371956 = EDGE_CURVE('',#371926,#371957,#371959,.T.); +#371957 = VERTEX_POINT('',#371958); +#371958 = CARTESIAN_POINT('',(144.8,-156.25,1.55)); +#371959 = CIRCLE('',#371960,0.150000058649); +#371960 = AXIS2_PLACEMENT_3D('',#371961,#371962,#371963); +#371961 = CARTESIAN_POINT('',(144.79999994135,-156.0999999413,1.55)); +#371962 = DIRECTION('',(0.,0.,-1.)); +#371963 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#371964 = ORIENTED_EDGE('',*,*,#371965,.F.); +#371965 = EDGE_CURVE('',#371966,#371957,#371968,.T.); +#371966 = VERTEX_POINT('',#371967); +#371967 = CARTESIAN_POINT('',(144.8,-156.25,1.51)); +#371968 = LINE('',#371969,#371970); +#371969 = CARTESIAN_POINT('',(144.8,-156.25,1.51)); +#371970 = VECTOR('',#371971,1.); +#371971 = DIRECTION('',(0.,0.,1.)); +#371972 = ORIENTED_EDGE('',*,*,#371973,.F.); +#371973 = EDGE_CURVE('',#371934,#371966,#371974,.T.); +#371974 = CIRCLE('',#371975,0.150000058649); +#371975 = AXIS2_PLACEMENT_3D('',#371976,#371977,#371978); +#371976 = CARTESIAN_POINT('',(144.79999994135,-156.0999999413,1.51)); +#371977 = DIRECTION('',(0.,0.,-1.)); +#371978 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#371979 = CYLINDRICAL_SURFACE('',#371980,0.150000058649); +#371980 = AXIS2_PLACEMENT_3D('',#371981,#371982,#371983); +#371981 = CARTESIAN_POINT('',(144.79999994135,-156.0999999413,1.51)); +#371982 = DIRECTION('',(0.,0.,-1.)); +#371983 = DIRECTION('',(1.,-3.909952194981E-07,0.)); +#371984 = ADVANCED_FACE('',(#371985),#372010,.T.); +#371985 = FACE_BOUND('',#371986,.T.); +#371986 = EDGE_LOOP('',(#371987,#371988,#371996,#372004)); +#371987 = ORIENTED_EDGE('',*,*,#371965,.T.); +#371988 = ORIENTED_EDGE('',*,*,#371989,.T.); +#371989 = EDGE_CURVE('',#371957,#371990,#371992,.T.); +#371990 = VERTEX_POINT('',#371991); +#371991 = CARTESIAN_POINT('',(143.6,-156.25,1.55)); +#371992 = LINE('',#371993,#371994); +#371993 = CARTESIAN_POINT('',(144.8,-156.25,1.55)); +#371994 = VECTOR('',#371995,1.); +#371995 = DIRECTION('',(-1.,0.,0.)); +#371996 = ORIENTED_EDGE('',*,*,#371997,.F.); +#371997 = EDGE_CURVE('',#371998,#371990,#372000,.T.); +#371998 = VERTEX_POINT('',#371999); +#371999 = CARTESIAN_POINT('',(143.6,-156.25,1.51)); +#372000 = LINE('',#372001,#372002); +#372001 = CARTESIAN_POINT('',(143.6,-156.25,1.51)); +#372002 = VECTOR('',#372003,1.); +#372003 = DIRECTION('',(0.,0.,1.)); +#372004 = ORIENTED_EDGE('',*,*,#372005,.F.); +#372005 = EDGE_CURVE('',#371966,#371998,#372006,.T.); +#372006 = LINE('',#372007,#372008); +#372007 = CARTESIAN_POINT('',(144.8,-156.25,1.51)); +#372008 = VECTOR('',#372009,1.); +#372009 = DIRECTION('',(-1.,0.,0.)); +#372010 = PLANE('',#372011); +#372011 = AXIS2_PLACEMENT_3D('',#372012,#372013,#372014); +#372012 = CARTESIAN_POINT('',(144.8,-156.25,1.51)); +#372013 = DIRECTION('',(0.,-1.,0.)); +#372014 = DIRECTION('',(-1.,0.,0.)); +#372015 = ADVANCED_FACE('',(#372016),#372043,.T.); +#372016 = FACE_BOUND('',#372017,.T.); +#372017 = EDGE_LOOP('',(#372018,#372019,#372028,#372036)); +#372018 = ORIENTED_EDGE('',*,*,#371997,.T.); +#372019 = ORIENTED_EDGE('',*,*,#372020,.T.); +#372020 = EDGE_CURVE('',#371990,#372021,#372023,.T.); +#372021 = VERTEX_POINT('',#372022); +#372022 = CARTESIAN_POINT('',(143.45,-156.1,1.55)); +#372023 = CIRCLE('',#372024,0.150000058649); +#372024 = AXIS2_PLACEMENT_3D('',#372025,#372026,#372027); +#372025 = CARTESIAN_POINT('',(143.60000005864,-156.0999999413,1.55)); +#372026 = DIRECTION('',(0.,0.,-1.)); +#372027 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#372028 = ORIENTED_EDGE('',*,*,#372029,.F.); +#372029 = EDGE_CURVE('',#372030,#372021,#372032,.T.); +#372030 = VERTEX_POINT('',#372031); +#372031 = CARTESIAN_POINT('',(143.45,-156.1,1.51)); +#372032 = LINE('',#372033,#372034); +#372033 = CARTESIAN_POINT('',(143.45,-156.1,1.51)); +#372034 = VECTOR('',#372035,1.); +#372035 = DIRECTION('',(0.,0.,1.)); +#372036 = ORIENTED_EDGE('',*,*,#372037,.F.); +#372037 = EDGE_CURVE('',#371998,#372030,#372038,.T.); +#372038 = CIRCLE('',#372039,0.150000058649); +#372039 = AXIS2_PLACEMENT_3D('',#372040,#372041,#372042); +#372040 = CARTESIAN_POINT('',(143.60000005864,-156.0999999413,1.51)); +#372041 = DIRECTION('',(0.,0.,-1.)); +#372042 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#372043 = CYLINDRICAL_SURFACE('',#372044,0.150000058649); +#372044 = AXIS2_PLACEMENT_3D('',#372045,#372046,#372047); +#372045 = CARTESIAN_POINT('',(143.60000005864,-156.0999999413,1.51)); +#372046 = DIRECTION('',(0.,0.,-1.)); +#372047 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#372048 = ADVANCED_FACE('',(#372049),#372065,.T.); +#372049 = FACE_BOUND('',#372050,.T.); +#372050 = EDGE_LOOP('',(#372051,#372052,#372058,#372059)); +#372051 = ORIENTED_EDGE('',*,*,#372029,.T.); +#372052 = ORIENTED_EDGE('',*,*,#372053,.T.); +#372053 = EDGE_CURVE('',#372021,#371821,#372054,.T.); +#372054 = LINE('',#372055,#372056); +#372055 = CARTESIAN_POINT('',(143.45,-156.1,1.55)); +#372056 = VECTOR('',#372057,1.); +#372057 = DIRECTION('',(0.,1.,0.)); +#372058 = ORIENTED_EDGE('',*,*,#371818,.F.); +#372059 = ORIENTED_EDGE('',*,*,#372060,.F.); +#372060 = EDGE_CURVE('',#372030,#371819,#372061,.T.); +#372061 = LINE('',#372062,#372063); +#372062 = CARTESIAN_POINT('',(143.45,-156.1,1.51)); +#372063 = VECTOR('',#372064,1.); +#372064 = DIRECTION('',(0.,1.,0.)); +#372065 = PLANE('',#372066); +#372066 = AXIS2_PLACEMENT_3D('',#372067,#372068,#372069); +#372067 = CARTESIAN_POINT('',(143.45,-156.1,1.51)); +#372068 = DIRECTION('',(-1.,0.,0.)); +#372069 = DIRECTION('',(0.,1.,0.)); +#372070 = ADVANCED_FACE('',(#372071),#372081,.F.); +#372071 = FACE_BOUND('',#372072,.T.); +#372072 = EDGE_LOOP('',(#372073,#372074,#372075,#372076,#372077,#372078, + #372079,#372080)); +#372073 = ORIENTED_EDGE('',*,*,#371845,.T.); +#372074 = ORIENTED_EDGE('',*,*,#371877,.T.); +#372075 = ORIENTED_EDGE('',*,*,#371909,.T.); +#372076 = ORIENTED_EDGE('',*,*,#371941,.T.); +#372077 = ORIENTED_EDGE('',*,*,#371973,.T.); +#372078 = ORIENTED_EDGE('',*,*,#372005,.T.); +#372079 = ORIENTED_EDGE('',*,*,#372037,.T.); +#372080 = ORIENTED_EDGE('',*,*,#372060,.T.); +#372081 = PLANE('',#372082); +#372082 = AXIS2_PLACEMENT_3D('',#372083,#372084,#372085); +#372083 = CARTESIAN_POINT('',(0.,0.,1.51)); +#372084 = DIRECTION('',(0.,0.,1.)); +#372085 = DIRECTION('',(1.,0.,-0.)); +#372086 = ADVANCED_FACE('',(#372087),#372097,.T.); +#372087 = FACE_BOUND('',#372088,.F.); +#372088 = EDGE_LOOP('',(#372089,#372090,#372091,#372092,#372093,#372094, + #372095,#372096)); +#372089 = ORIENTED_EDGE('',*,*,#371828,.T.); +#372090 = ORIENTED_EDGE('',*,*,#371861,.T.); +#372091 = ORIENTED_EDGE('',*,*,#371892,.T.); +#372092 = ORIENTED_EDGE('',*,*,#371925,.T.); +#372093 = ORIENTED_EDGE('',*,*,#371956,.T.); +#372094 = ORIENTED_EDGE('',*,*,#371989,.T.); +#372095 = ORIENTED_EDGE('',*,*,#372020,.T.); +#372096 = ORIENTED_EDGE('',*,*,#372053,.T.); +#372097 = PLANE('',#372098); +#372098 = AXIS2_PLACEMENT_3D('',#372099,#372100,#372101); +#372099 = CARTESIAN_POINT('',(0.,0.,1.55)); +#372100 = DIRECTION('',(0.,0.,1.)); +#372101 = DIRECTION('',(1.,0.,-0.)); +#372102 = MANIFOLD_SOLID_BREP('',#372103); +#372103 = CLOSED_SHELL('',(#372104,#372146,#372177,#372210,#372241, + #372274,#372305,#372338,#372360,#372376)); +#372104 = ADVANCED_FACE('',(#372105),#372141,.T.); +#372105 = FACE_BOUND('',#372106,.T.); +#372106 = EDGE_LOOP('',(#372107,#372117,#372126,#372134)); +#372107 = ORIENTED_EDGE('',*,*,#372108,.T.); +#372108 = EDGE_CURVE('',#372109,#372111,#372113,.T.); +#372109 = VERTEX_POINT('',#372110); +#372110 = CARTESIAN_POINT('',(124.3,-82.175,1.51)); +#372111 = VERTEX_POINT('',#372112); +#372112 = CARTESIAN_POINT('',(124.3,-82.175,1.55)); +#372113 = LINE('',#372114,#372115); +#372114 = CARTESIAN_POINT('',(124.3,-82.175,1.51)); +#372115 = VECTOR('',#372116,1.); +#372116 = DIRECTION('',(0.,0.,1.)); +#372117 = ORIENTED_EDGE('',*,*,#372118,.T.); +#372118 = EDGE_CURVE('',#372111,#372119,#372121,.T.); +#372119 = VERTEX_POINT('',#372120); +#372120 = CARTESIAN_POINT('',(124.45,-82.025,1.55)); +#372121 = CIRCLE('',#372122,0.150000058649); +#372122 = AXIS2_PLACEMENT_3D('',#372123,#372124,#372125); +#372123 = CARTESIAN_POINT('',(124.45000005864,-82.17500005864,1.55)); +#372124 = DIRECTION('',(0.,0.,-1.)); +#372125 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#372126 = ORIENTED_EDGE('',*,*,#372127,.F.); +#372127 = EDGE_CURVE('',#372128,#372119,#372130,.T.); +#372128 = VERTEX_POINT('',#372129); +#372129 = CARTESIAN_POINT('',(124.45,-82.025,1.51)); +#372130 = LINE('',#372131,#372132); +#372131 = CARTESIAN_POINT('',(124.45,-82.025,1.51)); +#372132 = VECTOR('',#372133,1.); +#372133 = DIRECTION('',(0.,0.,1.)); +#372134 = ORIENTED_EDGE('',*,*,#372135,.F.); +#372135 = EDGE_CURVE('',#372109,#372128,#372136,.T.); +#372136 = CIRCLE('',#372137,0.150000058649); +#372137 = AXIS2_PLACEMENT_3D('',#372138,#372139,#372140); +#372138 = CARTESIAN_POINT('',(124.45000005864,-82.17500005864,1.51)); +#372139 = DIRECTION('',(0.,0.,-1.)); +#372140 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#372141 = CYLINDRICAL_SURFACE('',#372142,0.150000058649); +#372142 = AXIS2_PLACEMENT_3D('',#372143,#372144,#372145); +#372143 = CARTESIAN_POINT('',(124.45000005864,-82.17500005864,1.51)); +#372144 = DIRECTION('',(0.,0.,-1.)); +#372145 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#372146 = ADVANCED_FACE('',(#372147),#372172,.T.); +#372147 = FACE_BOUND('',#372148,.T.); +#372148 = EDGE_LOOP('',(#372149,#372150,#372158,#372166)); +#372149 = ORIENTED_EDGE('',*,*,#372127,.T.); +#372150 = ORIENTED_EDGE('',*,*,#372151,.T.); +#372151 = EDGE_CURVE('',#372119,#372152,#372154,.T.); +#372152 = VERTEX_POINT('',#372153); +#372153 = CARTESIAN_POINT('',(124.75,-82.025,1.55)); +#372154 = LINE('',#372155,#372156); +#372155 = CARTESIAN_POINT('',(124.45,-82.025,1.55)); +#372156 = VECTOR('',#372157,1.); +#372157 = DIRECTION('',(1.,0.,0.)); +#372158 = ORIENTED_EDGE('',*,*,#372159,.F.); +#372159 = EDGE_CURVE('',#372160,#372152,#372162,.T.); +#372160 = VERTEX_POINT('',#372161); +#372161 = CARTESIAN_POINT('',(124.75,-82.025,1.51)); +#372162 = LINE('',#372163,#372164); +#372163 = CARTESIAN_POINT('',(124.75,-82.025,1.51)); +#372164 = VECTOR('',#372165,1.); +#372165 = DIRECTION('',(0.,0.,1.)); +#372166 = ORIENTED_EDGE('',*,*,#372167,.F.); +#372167 = EDGE_CURVE('',#372128,#372160,#372168,.T.); +#372168 = LINE('',#372169,#372170); +#372169 = CARTESIAN_POINT('',(124.45,-82.025,1.51)); +#372170 = VECTOR('',#372171,1.); +#372171 = DIRECTION('',(1.,0.,0.)); +#372172 = PLANE('',#372173); +#372173 = AXIS2_PLACEMENT_3D('',#372174,#372175,#372176); +#372174 = CARTESIAN_POINT('',(124.45,-82.025,1.51)); +#372175 = DIRECTION('',(0.,1.,0.)); +#372176 = DIRECTION('',(1.,0.,0.)); +#372177 = ADVANCED_FACE('',(#372178),#372205,.T.); +#372178 = FACE_BOUND('',#372179,.T.); +#372179 = EDGE_LOOP('',(#372180,#372181,#372190,#372198)); +#372180 = ORIENTED_EDGE('',*,*,#372159,.T.); +#372181 = ORIENTED_EDGE('',*,*,#372182,.T.); +#372182 = EDGE_CURVE('',#372152,#372183,#372185,.T.); +#372183 = VERTEX_POINT('',#372184); +#372184 = CARTESIAN_POINT('',(124.9,-82.175,1.55)); +#372185 = CIRCLE('',#372186,0.150000058649); +#372186 = AXIS2_PLACEMENT_3D('',#372187,#372188,#372189); +#372187 = CARTESIAN_POINT('',(124.74999994135,-82.17500005864,1.55)); +#372188 = DIRECTION('',(0.,0.,-1.)); +#372189 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#372190 = ORIENTED_EDGE('',*,*,#372191,.F.); +#372191 = EDGE_CURVE('',#372192,#372183,#372194,.T.); +#372192 = VERTEX_POINT('',#372193); +#372193 = CARTESIAN_POINT('',(124.9,-82.175,1.51)); +#372194 = LINE('',#372195,#372196); +#372195 = CARTESIAN_POINT('',(124.9,-82.175,1.51)); +#372196 = VECTOR('',#372197,1.); +#372197 = DIRECTION('',(0.,0.,1.)); +#372198 = ORIENTED_EDGE('',*,*,#372199,.F.); +#372199 = EDGE_CURVE('',#372160,#372192,#372200,.T.); +#372200 = CIRCLE('',#372201,0.150000058649); +#372201 = AXIS2_PLACEMENT_3D('',#372202,#372203,#372204); +#372202 = CARTESIAN_POINT('',(124.74999994135,-82.17500005864,1.51)); +#372203 = DIRECTION('',(0.,0.,-1.)); +#372204 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#372205 = CYLINDRICAL_SURFACE('',#372206,0.150000058649); +#372206 = AXIS2_PLACEMENT_3D('',#372207,#372208,#372209); +#372207 = CARTESIAN_POINT('',(124.74999994135,-82.17500005864,1.51)); +#372208 = DIRECTION('',(0.,0.,-1.)); +#372209 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#372210 = ADVANCED_FACE('',(#372211),#372236,.T.); +#372211 = FACE_BOUND('',#372212,.T.); +#372212 = EDGE_LOOP('',(#372213,#372214,#372222,#372230)); +#372213 = ORIENTED_EDGE('',*,*,#372191,.T.); +#372214 = ORIENTED_EDGE('',*,*,#372215,.T.); +#372215 = EDGE_CURVE('',#372183,#372216,#372218,.T.); +#372216 = VERTEX_POINT('',#372217); +#372217 = CARTESIAN_POINT('',(124.9,-83.425,1.55)); +#372218 = LINE('',#372219,#372220); +#372219 = CARTESIAN_POINT('',(124.9,-82.175,1.55)); +#372220 = VECTOR('',#372221,1.); +#372221 = DIRECTION('',(0.,-1.,0.)); +#372222 = ORIENTED_EDGE('',*,*,#372223,.F.); +#372223 = EDGE_CURVE('',#372224,#372216,#372226,.T.); +#372224 = VERTEX_POINT('',#372225); +#372225 = CARTESIAN_POINT('',(124.9,-83.425,1.51)); +#372226 = LINE('',#372227,#372228); +#372227 = CARTESIAN_POINT('',(124.9,-83.425,1.51)); +#372228 = VECTOR('',#372229,1.); +#372229 = DIRECTION('',(0.,0.,1.)); +#372230 = ORIENTED_EDGE('',*,*,#372231,.F.); +#372231 = EDGE_CURVE('',#372192,#372224,#372232,.T.); +#372232 = LINE('',#372233,#372234); +#372233 = CARTESIAN_POINT('',(124.9,-82.175,1.51)); +#372234 = VECTOR('',#372235,1.); +#372235 = DIRECTION('',(0.,-1.,0.)); +#372236 = PLANE('',#372237); +#372237 = AXIS2_PLACEMENT_3D('',#372238,#372239,#372240); +#372238 = CARTESIAN_POINT('',(124.9,-82.175,1.51)); +#372239 = DIRECTION('',(1.,0.,-0.)); +#372240 = DIRECTION('',(0.,-1.,0.)); +#372241 = ADVANCED_FACE('',(#372242),#372269,.T.); +#372242 = FACE_BOUND('',#372243,.T.); +#372243 = EDGE_LOOP('',(#372244,#372245,#372254,#372262)); +#372244 = ORIENTED_EDGE('',*,*,#372223,.T.); +#372245 = ORIENTED_EDGE('',*,*,#372246,.T.); +#372246 = EDGE_CURVE('',#372216,#372247,#372249,.T.); +#372247 = VERTEX_POINT('',#372248); +#372248 = CARTESIAN_POINT('',(124.75,-83.575,1.55)); +#372249 = CIRCLE('',#372250,0.150000058649); +#372250 = AXIS2_PLACEMENT_3D('',#372251,#372252,#372253); +#372251 = CARTESIAN_POINT('',(124.74999994135,-83.42499994135,1.55)); +#372252 = DIRECTION('',(0.,0.,-1.)); +#372253 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#372254 = ORIENTED_EDGE('',*,*,#372255,.F.); +#372255 = EDGE_CURVE('',#372256,#372247,#372258,.T.); +#372256 = VERTEX_POINT('',#372257); +#372257 = CARTESIAN_POINT('',(124.75,-83.575,1.51)); +#372258 = LINE('',#372259,#372260); +#372259 = CARTESIAN_POINT('',(124.75,-83.575,1.51)); +#372260 = VECTOR('',#372261,1.); +#372261 = DIRECTION('',(0.,0.,1.)); +#372262 = ORIENTED_EDGE('',*,*,#372263,.F.); +#372263 = EDGE_CURVE('',#372224,#372256,#372264,.T.); +#372264 = CIRCLE('',#372265,0.150000058649); +#372265 = AXIS2_PLACEMENT_3D('',#372266,#372267,#372268); +#372266 = CARTESIAN_POINT('',(124.74999994135,-83.42499994135,1.51)); +#372267 = DIRECTION('',(0.,0.,-1.)); +#372268 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#372269 = CYLINDRICAL_SURFACE('',#372270,0.150000058649); +#372270 = AXIS2_PLACEMENT_3D('',#372271,#372272,#372273); +#372271 = CARTESIAN_POINT('',(124.74999994135,-83.42499994135,1.51)); +#372272 = DIRECTION('',(0.,0.,-1.)); +#372273 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#372274 = ADVANCED_FACE('',(#372275),#372300,.T.); +#372275 = FACE_BOUND('',#372276,.T.); +#372276 = EDGE_LOOP('',(#372277,#372278,#372286,#372294)); +#372277 = ORIENTED_EDGE('',*,*,#372255,.T.); +#372278 = ORIENTED_EDGE('',*,*,#372279,.T.); +#372279 = EDGE_CURVE('',#372247,#372280,#372282,.T.); +#372280 = VERTEX_POINT('',#372281); +#372281 = CARTESIAN_POINT('',(124.45,-83.575,1.55)); +#372282 = LINE('',#372283,#372284); +#372283 = CARTESIAN_POINT('',(124.75,-83.575,1.55)); +#372284 = VECTOR('',#372285,1.); +#372285 = DIRECTION('',(-1.,0.,0.)); +#372286 = ORIENTED_EDGE('',*,*,#372287,.F.); +#372287 = EDGE_CURVE('',#372288,#372280,#372290,.T.); +#372288 = VERTEX_POINT('',#372289); +#372289 = CARTESIAN_POINT('',(124.45,-83.575,1.51)); +#372290 = LINE('',#372291,#372292); +#372291 = CARTESIAN_POINT('',(124.45,-83.575,1.51)); +#372292 = VECTOR('',#372293,1.); +#372293 = DIRECTION('',(0.,0.,1.)); +#372294 = ORIENTED_EDGE('',*,*,#372295,.F.); +#372295 = EDGE_CURVE('',#372256,#372288,#372296,.T.); +#372296 = LINE('',#372297,#372298); +#372297 = CARTESIAN_POINT('',(124.75,-83.575,1.51)); +#372298 = VECTOR('',#372299,1.); +#372299 = DIRECTION('',(-1.,0.,0.)); +#372300 = PLANE('',#372301); +#372301 = AXIS2_PLACEMENT_3D('',#372302,#372303,#372304); +#372302 = CARTESIAN_POINT('',(124.75,-83.575,1.51)); +#372303 = DIRECTION('',(0.,-1.,0.)); +#372304 = DIRECTION('',(-1.,0.,0.)); +#372305 = ADVANCED_FACE('',(#372306),#372333,.T.); +#372306 = FACE_BOUND('',#372307,.T.); +#372307 = EDGE_LOOP('',(#372308,#372309,#372318,#372326)); +#372308 = ORIENTED_EDGE('',*,*,#372287,.T.); +#372309 = ORIENTED_EDGE('',*,*,#372310,.T.); +#372310 = EDGE_CURVE('',#372280,#372311,#372313,.T.); +#372311 = VERTEX_POINT('',#372312); +#372312 = CARTESIAN_POINT('',(124.3,-83.425,1.55)); +#372313 = CIRCLE('',#372314,0.150000058649); +#372314 = AXIS2_PLACEMENT_3D('',#372315,#372316,#372317); +#372315 = CARTESIAN_POINT('',(124.45000005864,-83.42499994135,1.55)); +#372316 = DIRECTION('',(0.,0.,-1.)); +#372317 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#372318 = ORIENTED_EDGE('',*,*,#372319,.F.); +#372319 = EDGE_CURVE('',#372320,#372311,#372322,.T.); +#372320 = VERTEX_POINT('',#372321); +#372321 = CARTESIAN_POINT('',(124.3,-83.425,1.51)); +#372322 = LINE('',#372323,#372324); +#372323 = CARTESIAN_POINT('',(124.3,-83.425,1.51)); +#372324 = VECTOR('',#372325,1.); +#372325 = DIRECTION('',(0.,0.,1.)); +#372326 = ORIENTED_EDGE('',*,*,#372327,.F.); +#372327 = EDGE_CURVE('',#372288,#372320,#372328,.T.); +#372328 = CIRCLE('',#372329,0.150000058649); +#372329 = AXIS2_PLACEMENT_3D('',#372330,#372331,#372332); +#372330 = CARTESIAN_POINT('',(124.45000005864,-83.42499994135,1.51)); +#372331 = DIRECTION('',(0.,0.,-1.)); +#372332 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#372333 = CYLINDRICAL_SURFACE('',#372334,0.150000058649); +#372334 = AXIS2_PLACEMENT_3D('',#372335,#372336,#372337); +#372335 = CARTESIAN_POINT('',(124.45000005864,-83.42499994135,1.51)); +#372336 = DIRECTION('',(0.,0.,-1.)); +#372337 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#372338 = ADVANCED_FACE('',(#372339),#372355,.T.); +#372339 = FACE_BOUND('',#372340,.T.); +#372340 = EDGE_LOOP('',(#372341,#372342,#372348,#372349)); +#372341 = ORIENTED_EDGE('',*,*,#372319,.T.); +#372342 = ORIENTED_EDGE('',*,*,#372343,.T.); +#372343 = EDGE_CURVE('',#372311,#372111,#372344,.T.); +#372344 = LINE('',#372345,#372346); +#372345 = CARTESIAN_POINT('',(124.3,-83.425,1.55)); +#372346 = VECTOR('',#372347,1.); +#372347 = DIRECTION('',(0.,1.,0.)); +#372348 = ORIENTED_EDGE('',*,*,#372108,.F.); +#372349 = ORIENTED_EDGE('',*,*,#372350,.F.); +#372350 = EDGE_CURVE('',#372320,#372109,#372351,.T.); +#372351 = LINE('',#372352,#372353); +#372352 = CARTESIAN_POINT('',(124.3,-83.425,1.51)); +#372353 = VECTOR('',#372354,1.); +#372354 = DIRECTION('',(0.,1.,0.)); +#372355 = PLANE('',#372356); +#372356 = AXIS2_PLACEMENT_3D('',#372357,#372358,#372359); +#372357 = CARTESIAN_POINT('',(124.3,-83.425,1.51)); +#372358 = DIRECTION('',(-1.,0.,0.)); +#372359 = DIRECTION('',(0.,1.,0.)); +#372360 = ADVANCED_FACE('',(#372361),#372371,.F.); +#372361 = FACE_BOUND('',#372362,.T.); +#372362 = EDGE_LOOP('',(#372363,#372364,#372365,#372366,#372367,#372368, + #372369,#372370)); +#372363 = ORIENTED_EDGE('',*,*,#372135,.T.); +#372364 = ORIENTED_EDGE('',*,*,#372167,.T.); +#372365 = ORIENTED_EDGE('',*,*,#372199,.T.); +#372366 = ORIENTED_EDGE('',*,*,#372231,.T.); +#372367 = ORIENTED_EDGE('',*,*,#372263,.T.); +#372368 = ORIENTED_EDGE('',*,*,#372295,.T.); +#372369 = ORIENTED_EDGE('',*,*,#372327,.T.); +#372370 = ORIENTED_EDGE('',*,*,#372350,.T.); +#372371 = PLANE('',#372372); +#372372 = AXIS2_PLACEMENT_3D('',#372373,#372374,#372375); +#372373 = CARTESIAN_POINT('',(0.,0.,1.51)); +#372374 = DIRECTION('',(0.,0.,1.)); +#372375 = DIRECTION('',(1.,0.,-0.)); +#372376 = ADVANCED_FACE('',(#372377),#372387,.T.); +#372377 = FACE_BOUND('',#372378,.F.); +#372378 = EDGE_LOOP('',(#372379,#372380,#372381,#372382,#372383,#372384, + #372385,#372386)); +#372379 = ORIENTED_EDGE('',*,*,#372118,.T.); +#372380 = ORIENTED_EDGE('',*,*,#372151,.T.); +#372381 = ORIENTED_EDGE('',*,*,#372182,.T.); +#372382 = ORIENTED_EDGE('',*,*,#372215,.T.); +#372383 = ORIENTED_EDGE('',*,*,#372246,.T.); +#372384 = ORIENTED_EDGE('',*,*,#372279,.T.); +#372385 = ORIENTED_EDGE('',*,*,#372310,.T.); +#372386 = ORIENTED_EDGE('',*,*,#372343,.T.); +#372387 = PLANE('',#372388); +#372388 = AXIS2_PLACEMENT_3D('',#372389,#372390,#372391); +#372389 = CARTESIAN_POINT('',(0.,0.,1.55)); +#372390 = DIRECTION('',(0.,0.,1.)); +#372391 = DIRECTION('',(1.,0.,-0.)); +#372392 = MANIFOLD_SOLID_BREP('',#372393); +#372393 = CLOSED_SHELL('',(#372394,#372436,#372467,#372500,#372531, + #372564,#372595,#372628,#372650,#372666)); +#372394 = ADVANCED_FACE('',(#372395),#372431,.T.); +#372395 = FACE_BOUND('',#372396,.T.); +#372396 = EDGE_LOOP('',(#372397,#372407,#372416,#372424)); +#372397 = ORIENTED_EDGE('',*,*,#372398,.T.); +#372398 = EDGE_CURVE('',#372399,#372401,#372403,.T.); +#372399 = VERTEX_POINT('',#372400); +#372400 = CARTESIAN_POINT('',(142.025,-132.775,1.51)); +#372401 = VERTEX_POINT('',#372402); +#372402 = CARTESIAN_POINT('',(142.025,-132.775,1.55)); +#372403 = LINE('',#372404,#372405); +#372404 = CARTESIAN_POINT('',(142.025,-132.775,1.51)); +#372405 = VECTOR('',#372406,1.); +#372406 = DIRECTION('',(0.,0.,1.)); +#372407 = ORIENTED_EDGE('',*,*,#372408,.T.); +#372408 = EDGE_CURVE('',#372401,#372409,#372411,.T.); +#372409 = VERTEX_POINT('',#372410); +#372410 = CARTESIAN_POINT('',(142.25,-132.55,1.55)); +#372411 = CIRCLE('',#372412,0.225000087974); +#372412 = AXIS2_PLACEMENT_3D('',#372413,#372414,#372415); +#372413 = CARTESIAN_POINT('',(142.25000008797,-132.7750000879,1.55)); +#372414 = DIRECTION('',(0.,0.,-1.)); +#372415 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#372416 = ORIENTED_EDGE('',*,*,#372417,.F.); +#372417 = EDGE_CURVE('',#372418,#372409,#372420,.T.); +#372418 = VERTEX_POINT('',#372419); +#372419 = CARTESIAN_POINT('',(142.25,-132.55,1.51)); +#372420 = LINE('',#372421,#372422); +#372421 = CARTESIAN_POINT('',(142.25,-132.55,1.51)); +#372422 = VECTOR('',#372423,1.); +#372423 = DIRECTION('',(0.,0.,1.)); +#372424 = ORIENTED_EDGE('',*,*,#372425,.F.); +#372425 = EDGE_CURVE('',#372399,#372418,#372426,.T.); +#372426 = CIRCLE('',#372427,0.225000087974); +#372427 = AXIS2_PLACEMENT_3D('',#372428,#372429,#372430); +#372428 = CARTESIAN_POINT('',(142.25000008797,-132.7750000879,1.51)); +#372429 = DIRECTION('',(0.,0.,-1.)); +#372430 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#372431 = CYLINDRICAL_SURFACE('',#372432,0.225000087974); +#372432 = AXIS2_PLACEMENT_3D('',#372433,#372434,#372435); +#372433 = CARTESIAN_POINT('',(142.25000008797,-132.7750000879,1.51)); +#372434 = DIRECTION('',(0.,0.,-1.)); +#372435 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#372436 = ADVANCED_FACE('',(#372437),#372462,.T.); +#372437 = FACE_BOUND('',#372438,.T.); +#372438 = EDGE_LOOP('',(#372439,#372440,#372448,#372456)); +#372439 = ORIENTED_EDGE('',*,*,#372417,.T.); +#372440 = ORIENTED_EDGE('',*,*,#372441,.T.); +#372441 = EDGE_CURVE('',#372409,#372442,#372444,.T.); +#372442 = VERTEX_POINT('',#372443); +#372443 = CARTESIAN_POINT('',(142.75,-132.55,1.55)); +#372444 = LINE('',#372445,#372446); +#372445 = CARTESIAN_POINT('',(142.25,-132.55,1.55)); +#372446 = VECTOR('',#372447,1.); +#372447 = DIRECTION('',(1.,0.,0.)); +#372448 = ORIENTED_EDGE('',*,*,#372449,.F.); +#372449 = EDGE_CURVE('',#372450,#372442,#372452,.T.); +#372450 = VERTEX_POINT('',#372451); +#372451 = CARTESIAN_POINT('',(142.75,-132.55,1.51)); +#372452 = LINE('',#372453,#372454); +#372453 = CARTESIAN_POINT('',(142.75,-132.55,1.51)); +#372454 = VECTOR('',#372455,1.); +#372455 = DIRECTION('',(0.,0.,1.)); +#372456 = ORIENTED_EDGE('',*,*,#372457,.F.); +#372457 = EDGE_CURVE('',#372418,#372450,#372458,.T.); +#372458 = LINE('',#372459,#372460); +#372459 = CARTESIAN_POINT('',(142.25,-132.55,1.51)); +#372460 = VECTOR('',#372461,1.); +#372461 = DIRECTION('',(1.,0.,0.)); +#372462 = PLANE('',#372463); +#372463 = AXIS2_PLACEMENT_3D('',#372464,#372465,#372466); +#372464 = CARTESIAN_POINT('',(142.25,-132.55,1.51)); +#372465 = DIRECTION('',(0.,1.,0.)); +#372466 = DIRECTION('',(1.,0.,0.)); +#372467 = ADVANCED_FACE('',(#372468),#372495,.T.); +#372468 = FACE_BOUND('',#372469,.T.); +#372469 = EDGE_LOOP('',(#372470,#372471,#372480,#372488)); +#372470 = ORIENTED_EDGE('',*,*,#372449,.T.); +#372471 = ORIENTED_EDGE('',*,*,#372472,.T.); +#372472 = EDGE_CURVE('',#372442,#372473,#372475,.T.); +#372473 = VERTEX_POINT('',#372474); +#372474 = CARTESIAN_POINT('',(142.975,-132.775,1.55)); +#372475 = CIRCLE('',#372476,0.225000087974); +#372476 = AXIS2_PLACEMENT_3D('',#372477,#372478,#372479); +#372477 = CARTESIAN_POINT('',(142.74999991202,-132.7750000879,1.55)); +#372478 = DIRECTION('',(0.,0.,-1.)); +#372479 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#372480 = ORIENTED_EDGE('',*,*,#372481,.F.); +#372481 = EDGE_CURVE('',#372482,#372473,#372484,.T.); +#372482 = VERTEX_POINT('',#372483); +#372483 = CARTESIAN_POINT('',(142.975,-132.775,1.51)); +#372484 = LINE('',#372485,#372486); +#372485 = CARTESIAN_POINT('',(142.975,-132.775,1.51)); +#372486 = VECTOR('',#372487,1.); +#372487 = DIRECTION('',(0.,0.,1.)); +#372488 = ORIENTED_EDGE('',*,*,#372489,.F.); +#372489 = EDGE_CURVE('',#372450,#372482,#372490,.T.); +#372490 = CIRCLE('',#372491,0.225000087974); +#372491 = AXIS2_PLACEMENT_3D('',#372492,#372493,#372494); +#372492 = CARTESIAN_POINT('',(142.74999991202,-132.7750000879,1.51)); +#372493 = DIRECTION('',(0.,0.,-1.)); +#372494 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#372495 = CYLINDRICAL_SURFACE('',#372496,0.225000087974); +#372496 = AXIS2_PLACEMENT_3D('',#372497,#372498,#372499); +#372497 = CARTESIAN_POINT('',(142.74999991202,-132.7750000879,1.51)); +#372498 = DIRECTION('',(0.,0.,-1.)); +#372499 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#372500 = ADVANCED_FACE('',(#372501),#372526,.T.); +#372501 = FACE_BOUND('',#372502,.T.); +#372502 = EDGE_LOOP('',(#372503,#372504,#372512,#372520)); +#372503 = ORIENTED_EDGE('',*,*,#372481,.T.); +#372504 = ORIENTED_EDGE('',*,*,#372505,.T.); +#372505 = EDGE_CURVE('',#372473,#372506,#372508,.T.); +#372506 = VERTEX_POINT('',#372507); +#372507 = CARTESIAN_POINT('',(142.975,-133.225,1.55)); +#372508 = LINE('',#372509,#372510); +#372509 = CARTESIAN_POINT('',(142.975,-132.775,1.55)); +#372510 = VECTOR('',#372511,1.); +#372511 = DIRECTION('',(0.,-1.,0.)); +#372512 = ORIENTED_EDGE('',*,*,#372513,.F.); +#372513 = EDGE_CURVE('',#372514,#372506,#372516,.T.); +#372514 = VERTEX_POINT('',#372515); +#372515 = CARTESIAN_POINT('',(142.975,-133.225,1.51)); +#372516 = LINE('',#372517,#372518); +#372517 = CARTESIAN_POINT('',(142.975,-133.225,1.51)); +#372518 = VECTOR('',#372519,1.); +#372519 = DIRECTION('',(0.,0.,1.)); +#372520 = ORIENTED_EDGE('',*,*,#372521,.F.); +#372521 = EDGE_CURVE('',#372482,#372514,#372522,.T.); +#372522 = LINE('',#372523,#372524); +#372523 = CARTESIAN_POINT('',(142.975,-132.775,1.51)); +#372524 = VECTOR('',#372525,1.); +#372525 = DIRECTION('',(0.,-1.,0.)); +#372526 = PLANE('',#372527); +#372527 = AXIS2_PLACEMENT_3D('',#372528,#372529,#372530); +#372528 = CARTESIAN_POINT('',(142.975,-132.775,1.51)); +#372529 = DIRECTION('',(1.,0.,-0.)); +#372530 = DIRECTION('',(0.,-1.,0.)); +#372531 = ADVANCED_FACE('',(#372532),#372559,.T.); +#372532 = FACE_BOUND('',#372533,.T.); +#372533 = EDGE_LOOP('',(#372534,#372535,#372544,#372552)); +#372534 = ORIENTED_EDGE('',*,*,#372513,.T.); +#372535 = ORIENTED_EDGE('',*,*,#372536,.T.); +#372536 = EDGE_CURVE('',#372506,#372537,#372539,.T.); +#372537 = VERTEX_POINT('',#372538); +#372538 = CARTESIAN_POINT('',(142.75,-133.45,1.55)); +#372539 = CIRCLE('',#372540,0.225000087974); +#372540 = AXIS2_PLACEMENT_3D('',#372541,#372542,#372543); +#372541 = CARTESIAN_POINT('',(142.74999991202,-133.224999912,1.55)); +#372542 = DIRECTION('',(0.,0.,-1.)); +#372543 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#372544 = ORIENTED_EDGE('',*,*,#372545,.F.); +#372545 = EDGE_CURVE('',#372546,#372537,#372548,.T.); +#372546 = VERTEX_POINT('',#372547); +#372547 = CARTESIAN_POINT('',(142.75,-133.45,1.51)); +#372548 = LINE('',#372549,#372550); +#372549 = CARTESIAN_POINT('',(142.75,-133.45,1.51)); +#372550 = VECTOR('',#372551,1.); +#372551 = DIRECTION('',(0.,0.,1.)); +#372552 = ORIENTED_EDGE('',*,*,#372553,.F.); +#372553 = EDGE_CURVE('',#372514,#372546,#372554,.T.); +#372554 = CIRCLE('',#372555,0.225000087974); +#372555 = AXIS2_PLACEMENT_3D('',#372556,#372557,#372558); +#372556 = CARTESIAN_POINT('',(142.74999991202,-133.224999912,1.51)); +#372557 = DIRECTION('',(0.,0.,-1.)); +#372558 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#372559 = CYLINDRICAL_SURFACE('',#372560,0.225000087974); +#372560 = AXIS2_PLACEMENT_3D('',#372561,#372562,#372563); +#372561 = CARTESIAN_POINT('',(142.74999991202,-133.224999912,1.51)); +#372562 = DIRECTION('',(0.,0.,-1.)); +#372563 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#372564 = ADVANCED_FACE('',(#372565),#372590,.T.); +#372565 = FACE_BOUND('',#372566,.T.); +#372566 = EDGE_LOOP('',(#372567,#372568,#372576,#372584)); +#372567 = ORIENTED_EDGE('',*,*,#372545,.T.); +#372568 = ORIENTED_EDGE('',*,*,#372569,.T.); +#372569 = EDGE_CURVE('',#372537,#372570,#372572,.T.); +#372570 = VERTEX_POINT('',#372571); +#372571 = CARTESIAN_POINT('',(142.25,-133.45,1.55)); +#372572 = LINE('',#372573,#372574); +#372573 = CARTESIAN_POINT('',(142.75,-133.45,1.55)); +#372574 = VECTOR('',#372575,1.); +#372575 = DIRECTION('',(-1.,0.,0.)); +#372576 = ORIENTED_EDGE('',*,*,#372577,.F.); +#372577 = EDGE_CURVE('',#372578,#372570,#372580,.T.); +#372578 = VERTEX_POINT('',#372579); +#372579 = CARTESIAN_POINT('',(142.25,-133.45,1.51)); +#372580 = LINE('',#372581,#372582); +#372581 = CARTESIAN_POINT('',(142.25,-133.45,1.51)); +#372582 = VECTOR('',#372583,1.); +#372583 = DIRECTION('',(0.,0.,1.)); +#372584 = ORIENTED_EDGE('',*,*,#372585,.F.); +#372585 = EDGE_CURVE('',#372546,#372578,#372586,.T.); +#372586 = LINE('',#372587,#372588); +#372587 = CARTESIAN_POINT('',(142.75,-133.45,1.51)); +#372588 = VECTOR('',#372589,1.); +#372589 = DIRECTION('',(-1.,0.,0.)); +#372590 = PLANE('',#372591); +#372591 = AXIS2_PLACEMENT_3D('',#372592,#372593,#372594); +#372592 = CARTESIAN_POINT('',(142.75,-133.45,1.51)); +#372593 = DIRECTION('',(0.,-1.,0.)); +#372594 = DIRECTION('',(-1.,0.,0.)); +#372595 = ADVANCED_FACE('',(#372596),#372623,.T.); +#372596 = FACE_BOUND('',#372597,.T.); +#372597 = EDGE_LOOP('',(#372598,#372599,#372608,#372616)); +#372598 = ORIENTED_EDGE('',*,*,#372577,.T.); +#372599 = ORIENTED_EDGE('',*,*,#372600,.T.); +#372600 = EDGE_CURVE('',#372570,#372601,#372603,.T.); +#372601 = VERTEX_POINT('',#372602); +#372602 = CARTESIAN_POINT('',(142.025,-133.225,1.55)); +#372603 = CIRCLE('',#372604,0.225000087974); +#372604 = AXIS2_PLACEMENT_3D('',#372605,#372606,#372607); +#372605 = CARTESIAN_POINT('',(142.25000008797,-133.224999912,1.55)); +#372606 = DIRECTION('',(0.,0.,-1.)); +#372607 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#372608 = ORIENTED_EDGE('',*,*,#372609,.F.); +#372609 = EDGE_CURVE('',#372610,#372601,#372612,.T.); +#372610 = VERTEX_POINT('',#372611); +#372611 = CARTESIAN_POINT('',(142.025,-133.225,1.51)); +#372612 = LINE('',#372613,#372614); +#372613 = CARTESIAN_POINT('',(142.025,-133.225,1.51)); +#372614 = VECTOR('',#372615,1.); +#372615 = DIRECTION('',(0.,0.,1.)); +#372616 = ORIENTED_EDGE('',*,*,#372617,.F.); +#372617 = EDGE_CURVE('',#372578,#372610,#372618,.T.); +#372618 = CIRCLE('',#372619,0.225000087974); +#372619 = AXIS2_PLACEMENT_3D('',#372620,#372621,#372622); +#372620 = CARTESIAN_POINT('',(142.25000008797,-133.224999912,1.51)); +#372621 = DIRECTION('',(0.,0.,-1.)); +#372622 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#372623 = CYLINDRICAL_SURFACE('',#372624,0.225000087974); +#372624 = AXIS2_PLACEMENT_3D('',#372625,#372626,#372627); +#372625 = CARTESIAN_POINT('',(142.25000008797,-133.224999912,1.51)); +#372626 = DIRECTION('',(0.,0.,-1.)); +#372627 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#372628 = ADVANCED_FACE('',(#372629),#372645,.T.); +#372629 = FACE_BOUND('',#372630,.T.); +#372630 = EDGE_LOOP('',(#372631,#372632,#372638,#372639)); +#372631 = ORIENTED_EDGE('',*,*,#372609,.T.); +#372632 = ORIENTED_EDGE('',*,*,#372633,.T.); +#372633 = EDGE_CURVE('',#372601,#372401,#372634,.T.); +#372634 = LINE('',#372635,#372636); +#372635 = CARTESIAN_POINT('',(142.025,-133.225,1.55)); +#372636 = VECTOR('',#372637,1.); +#372637 = DIRECTION('',(0.,1.,0.)); +#372638 = ORIENTED_EDGE('',*,*,#372398,.F.); +#372639 = ORIENTED_EDGE('',*,*,#372640,.F.); +#372640 = EDGE_CURVE('',#372610,#372399,#372641,.T.); +#372641 = LINE('',#372642,#372643); +#372642 = CARTESIAN_POINT('',(142.025,-133.225,1.51)); +#372643 = VECTOR('',#372644,1.); +#372644 = DIRECTION('',(0.,1.,0.)); +#372645 = PLANE('',#372646); +#372646 = AXIS2_PLACEMENT_3D('',#372647,#372648,#372649); +#372647 = CARTESIAN_POINT('',(142.025,-133.225,1.51)); +#372648 = DIRECTION('',(-1.,0.,0.)); +#372649 = DIRECTION('',(0.,1.,0.)); +#372650 = ADVANCED_FACE('',(#372651),#372661,.F.); +#372651 = FACE_BOUND('',#372652,.T.); +#372652 = EDGE_LOOP('',(#372653,#372654,#372655,#372656,#372657,#372658, + #372659,#372660)); +#372653 = ORIENTED_EDGE('',*,*,#372425,.T.); +#372654 = ORIENTED_EDGE('',*,*,#372457,.T.); +#372655 = ORIENTED_EDGE('',*,*,#372489,.T.); +#372656 = ORIENTED_EDGE('',*,*,#372521,.T.); +#372657 = ORIENTED_EDGE('',*,*,#372553,.T.); +#372658 = ORIENTED_EDGE('',*,*,#372585,.T.); +#372659 = ORIENTED_EDGE('',*,*,#372617,.T.); +#372660 = ORIENTED_EDGE('',*,*,#372640,.T.); +#372661 = PLANE('',#372662); +#372662 = AXIS2_PLACEMENT_3D('',#372663,#372664,#372665); +#372663 = CARTESIAN_POINT('',(0.,0.,1.51)); +#372664 = DIRECTION('',(0.,0.,1.)); +#372665 = DIRECTION('',(1.,0.,-0.)); +#372666 = ADVANCED_FACE('',(#372667),#372677,.T.); +#372667 = FACE_BOUND('',#372668,.F.); +#372668 = EDGE_LOOP('',(#372669,#372670,#372671,#372672,#372673,#372674, + #372675,#372676)); +#372669 = ORIENTED_EDGE('',*,*,#372408,.T.); +#372670 = ORIENTED_EDGE('',*,*,#372441,.T.); +#372671 = ORIENTED_EDGE('',*,*,#372472,.T.); +#372672 = ORIENTED_EDGE('',*,*,#372505,.T.); +#372673 = ORIENTED_EDGE('',*,*,#372536,.T.); +#372674 = ORIENTED_EDGE('',*,*,#372569,.T.); +#372675 = ORIENTED_EDGE('',*,*,#372600,.T.); +#372676 = ORIENTED_EDGE('',*,*,#372633,.T.); +#372677 = PLANE('',#372678); +#372678 = AXIS2_PLACEMENT_3D('',#372679,#372680,#372681); +#372679 = CARTESIAN_POINT('',(0.,0.,1.55)); +#372680 = DIRECTION('',(0.,0.,1.)); +#372681 = DIRECTION('',(1.,0.,-0.)); +#372682 = MANIFOLD_SOLID_BREP('',#372683); +#372683 = CLOSED_SHELL('',(#372684,#372726,#372757,#372790,#372821, + #372854,#372885,#372918,#372940,#372956)); +#372684 = ADVANCED_FACE('',(#372685),#372721,.T.); +#372685 = FACE_BOUND('',#372686,.T.); +#372686 = EDGE_LOOP('',(#372687,#372697,#372706,#372714)); +#372687 = ORIENTED_EDGE('',*,*,#372688,.T.); +#372688 = EDGE_CURVE('',#372689,#372691,#372693,.T.); +#372689 = VERTEX_POINT('',#372690); +#372690 = CARTESIAN_POINT('',(124.52,-84.455,1.51)); +#372691 = VERTEX_POINT('',#372692); +#372692 = CARTESIAN_POINT('',(124.52,-84.455,1.55)); +#372693 = LINE('',#372694,#372695); +#372694 = CARTESIAN_POINT('',(124.52,-84.455,1.51)); +#372695 = VECTOR('',#372696,1.); +#372696 = DIRECTION('',(0.,0.,1.)); +#372697 = ORIENTED_EDGE('',*,*,#372698,.T.); +#372698 = EDGE_CURVE('',#372691,#372699,#372701,.T.); +#372699 = VERTEX_POINT('',#372700); +#372700 = CARTESIAN_POINT('',(124.66,-84.315,1.55)); +#372701 = CIRCLE('',#372702,0.139999827125); +#372702 = AXIS2_PLACEMENT_3D('',#372703,#372704,#372705); +#372703 = CARTESIAN_POINT('',(124.65999982712,-84.45499982712,1.55)); +#372704 = DIRECTION('',(0.,0.,-1.)); +#372705 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#372706 = ORIENTED_EDGE('',*,*,#372707,.F.); +#372707 = EDGE_CURVE('',#372708,#372699,#372710,.T.); +#372708 = VERTEX_POINT('',#372709); +#372709 = CARTESIAN_POINT('',(124.66,-84.315,1.51)); +#372710 = LINE('',#372711,#372712); +#372711 = CARTESIAN_POINT('',(124.66,-84.315,1.51)); +#372712 = VECTOR('',#372713,1.); +#372713 = DIRECTION('',(0.,0.,1.)); +#372714 = ORIENTED_EDGE('',*,*,#372715,.F.); +#372715 = EDGE_CURVE('',#372689,#372708,#372716,.T.); +#372716 = CIRCLE('',#372717,0.139999827125); +#372717 = AXIS2_PLACEMENT_3D('',#372718,#372719,#372720); +#372718 = CARTESIAN_POINT('',(124.65999982712,-84.45499982712,1.51)); +#372719 = DIRECTION('',(0.,0.,-1.)); +#372720 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#372721 = CYLINDRICAL_SURFACE('',#372722,0.139999827125); +#372722 = AXIS2_PLACEMENT_3D('',#372723,#372724,#372725); +#372723 = CARTESIAN_POINT('',(124.65999982712,-84.45499982712,1.51)); +#372724 = DIRECTION('',(0.,0.,-1.)); +#372725 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#372726 = ADVANCED_FACE('',(#372727),#372752,.T.); +#372727 = FACE_BOUND('',#372728,.T.); +#372728 = EDGE_LOOP('',(#372729,#372730,#372738,#372746)); +#372729 = ORIENTED_EDGE('',*,*,#372707,.T.); +#372730 = ORIENTED_EDGE('',*,*,#372731,.T.); +#372731 = EDGE_CURVE('',#372699,#372732,#372734,.T.); +#372732 = VERTEX_POINT('',#372733); +#372733 = CARTESIAN_POINT('',(124.94,-84.315,1.55)); +#372734 = LINE('',#372735,#372736); +#372735 = CARTESIAN_POINT('',(124.66,-84.315,1.55)); +#372736 = VECTOR('',#372737,1.); +#372737 = DIRECTION('',(1.,0.,0.)); +#372738 = ORIENTED_EDGE('',*,*,#372739,.F.); +#372739 = EDGE_CURVE('',#372740,#372732,#372742,.T.); +#372740 = VERTEX_POINT('',#372741); +#372741 = CARTESIAN_POINT('',(124.94,-84.315,1.51)); +#372742 = LINE('',#372743,#372744); +#372743 = CARTESIAN_POINT('',(124.94,-84.315,1.51)); +#372744 = VECTOR('',#372745,1.); +#372745 = DIRECTION('',(0.,0.,1.)); +#372746 = ORIENTED_EDGE('',*,*,#372747,.F.); +#372747 = EDGE_CURVE('',#372708,#372740,#372748,.T.); +#372748 = LINE('',#372749,#372750); +#372749 = CARTESIAN_POINT('',(124.66,-84.315,1.51)); +#372750 = VECTOR('',#372751,1.); +#372751 = DIRECTION('',(1.,0.,0.)); +#372752 = PLANE('',#372753); +#372753 = AXIS2_PLACEMENT_3D('',#372754,#372755,#372756); +#372754 = CARTESIAN_POINT('',(124.66,-84.315,1.51)); +#372755 = DIRECTION('',(0.,1.,0.)); +#372756 = DIRECTION('',(1.,0.,0.)); +#372757 = ADVANCED_FACE('',(#372758),#372785,.T.); +#372758 = FACE_BOUND('',#372759,.T.); +#372759 = EDGE_LOOP('',(#372760,#372761,#372770,#372778)); +#372760 = ORIENTED_EDGE('',*,*,#372739,.T.); +#372761 = ORIENTED_EDGE('',*,*,#372762,.T.); +#372762 = EDGE_CURVE('',#372732,#372763,#372765,.T.); +#372763 = VERTEX_POINT('',#372764); +#372764 = CARTESIAN_POINT('',(125.08,-84.455,1.55)); +#372765 = CIRCLE('',#372766,0.139999827125); +#372766 = AXIS2_PLACEMENT_3D('',#372767,#372768,#372769); +#372767 = CARTESIAN_POINT('',(124.94000017287,-84.45499982712,1.55)); +#372768 = DIRECTION('',(0.,0.,-1.)); +#372769 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#372770 = ORIENTED_EDGE('',*,*,#372771,.F.); +#372771 = EDGE_CURVE('',#372772,#372763,#372774,.T.); +#372772 = VERTEX_POINT('',#372773); +#372773 = CARTESIAN_POINT('',(125.08,-84.455,1.51)); +#372774 = LINE('',#372775,#372776); +#372775 = CARTESIAN_POINT('',(125.08,-84.455,1.51)); +#372776 = VECTOR('',#372777,1.); +#372777 = DIRECTION('',(0.,0.,1.)); +#372778 = ORIENTED_EDGE('',*,*,#372779,.F.); +#372779 = EDGE_CURVE('',#372740,#372772,#372780,.T.); +#372780 = CIRCLE('',#372781,0.139999827125); +#372781 = AXIS2_PLACEMENT_3D('',#372782,#372783,#372784); +#372782 = CARTESIAN_POINT('',(124.94000017287,-84.45499982712,1.51)); +#372783 = DIRECTION('',(0.,0.,-1.)); +#372784 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#372785 = CYLINDRICAL_SURFACE('',#372786,0.139999827125); +#372786 = AXIS2_PLACEMENT_3D('',#372787,#372788,#372789); +#372787 = CARTESIAN_POINT('',(124.94000017287,-84.45499982712,1.51)); +#372788 = DIRECTION('',(0.,0.,-1.)); +#372789 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#372790 = ADVANCED_FACE('',(#372791),#372816,.T.); +#372791 = FACE_BOUND('',#372792,.T.); +#372792 = EDGE_LOOP('',(#372793,#372794,#372802,#372810)); +#372793 = ORIENTED_EDGE('',*,*,#372771,.T.); +#372794 = ORIENTED_EDGE('',*,*,#372795,.T.); +#372795 = EDGE_CURVE('',#372763,#372796,#372798,.T.); +#372796 = VERTEX_POINT('',#372797); +#372797 = CARTESIAN_POINT('',(125.08,-84.795,1.55)); +#372798 = LINE('',#372799,#372800); +#372799 = CARTESIAN_POINT('',(125.08,-84.455,1.55)); +#372800 = VECTOR('',#372801,1.); +#372801 = DIRECTION('',(0.,-1.,0.)); +#372802 = ORIENTED_EDGE('',*,*,#372803,.F.); +#372803 = EDGE_CURVE('',#372804,#372796,#372806,.T.); +#372804 = VERTEX_POINT('',#372805); +#372805 = CARTESIAN_POINT('',(125.08,-84.795,1.51)); +#372806 = LINE('',#372807,#372808); +#372807 = CARTESIAN_POINT('',(125.08,-84.795,1.51)); +#372808 = VECTOR('',#372809,1.); +#372809 = DIRECTION('',(0.,0.,1.)); +#372810 = ORIENTED_EDGE('',*,*,#372811,.F.); +#372811 = EDGE_CURVE('',#372772,#372804,#372812,.T.); +#372812 = LINE('',#372813,#372814); +#372813 = CARTESIAN_POINT('',(125.08,-84.455,1.51)); +#372814 = VECTOR('',#372815,1.); +#372815 = DIRECTION('',(0.,-1.,0.)); +#372816 = PLANE('',#372817); +#372817 = AXIS2_PLACEMENT_3D('',#372818,#372819,#372820); +#372818 = CARTESIAN_POINT('',(125.08,-84.455,1.51)); +#372819 = DIRECTION('',(1.,0.,-0.)); +#372820 = DIRECTION('',(0.,-1.,0.)); +#372821 = ADVANCED_FACE('',(#372822),#372849,.T.); +#372822 = FACE_BOUND('',#372823,.T.); +#372823 = EDGE_LOOP('',(#372824,#372825,#372834,#372842)); +#372824 = ORIENTED_EDGE('',*,*,#372803,.T.); +#372825 = ORIENTED_EDGE('',*,*,#372826,.T.); +#372826 = EDGE_CURVE('',#372796,#372827,#372829,.T.); +#372827 = VERTEX_POINT('',#372828); +#372828 = CARTESIAN_POINT('',(124.94,-84.935,1.55)); +#372829 = CIRCLE('',#372830,0.139999827125); +#372830 = AXIS2_PLACEMENT_3D('',#372831,#372832,#372833); +#372831 = CARTESIAN_POINT('',(124.94000017287,-84.79500017287,1.55)); +#372832 = DIRECTION('',(0.,0.,-1.)); +#372833 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#372834 = ORIENTED_EDGE('',*,*,#372835,.F.); +#372835 = EDGE_CURVE('',#372836,#372827,#372838,.T.); +#372836 = VERTEX_POINT('',#372837); +#372837 = CARTESIAN_POINT('',(124.94,-84.935,1.51)); +#372838 = LINE('',#372839,#372840); +#372839 = CARTESIAN_POINT('',(124.94,-84.935,1.51)); +#372840 = VECTOR('',#372841,1.); +#372841 = DIRECTION('',(0.,0.,1.)); +#372842 = ORIENTED_EDGE('',*,*,#372843,.F.); +#372843 = EDGE_CURVE('',#372804,#372836,#372844,.T.); +#372844 = CIRCLE('',#372845,0.139999827125); +#372845 = AXIS2_PLACEMENT_3D('',#372846,#372847,#372848); +#372846 = CARTESIAN_POINT('',(124.94000017287,-84.79500017287,1.51)); +#372847 = DIRECTION('',(0.,0.,-1.)); +#372848 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#372849 = CYLINDRICAL_SURFACE('',#372850,0.139999827125); +#372850 = AXIS2_PLACEMENT_3D('',#372851,#372852,#372853); +#372851 = CARTESIAN_POINT('',(124.94000017287,-84.79500017287,1.51)); +#372852 = DIRECTION('',(0.,0.,-1.)); +#372853 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#372854 = ADVANCED_FACE('',(#372855),#372880,.T.); +#372855 = FACE_BOUND('',#372856,.T.); +#372856 = EDGE_LOOP('',(#372857,#372858,#372866,#372874)); +#372857 = ORIENTED_EDGE('',*,*,#372835,.T.); +#372858 = ORIENTED_EDGE('',*,*,#372859,.T.); +#372859 = EDGE_CURVE('',#372827,#372860,#372862,.T.); +#372860 = VERTEX_POINT('',#372861); +#372861 = CARTESIAN_POINT('',(124.66,-84.935,1.55)); +#372862 = LINE('',#372863,#372864); +#372863 = CARTESIAN_POINT('',(124.94,-84.935,1.55)); +#372864 = VECTOR('',#372865,1.); +#372865 = DIRECTION('',(-1.,0.,0.)); +#372866 = ORIENTED_EDGE('',*,*,#372867,.F.); +#372867 = EDGE_CURVE('',#372868,#372860,#372870,.T.); +#372868 = VERTEX_POINT('',#372869); +#372869 = CARTESIAN_POINT('',(124.66,-84.935,1.51)); +#372870 = LINE('',#372871,#372872); +#372871 = CARTESIAN_POINT('',(124.66,-84.935,1.51)); +#372872 = VECTOR('',#372873,1.); +#372873 = DIRECTION('',(0.,0.,1.)); +#372874 = ORIENTED_EDGE('',*,*,#372875,.F.); +#372875 = EDGE_CURVE('',#372836,#372868,#372876,.T.); +#372876 = LINE('',#372877,#372878); +#372877 = CARTESIAN_POINT('',(124.94,-84.935,1.51)); +#372878 = VECTOR('',#372879,1.); +#372879 = DIRECTION('',(-1.,0.,0.)); +#372880 = PLANE('',#372881); +#372881 = AXIS2_PLACEMENT_3D('',#372882,#372883,#372884); +#372882 = CARTESIAN_POINT('',(124.94,-84.935,1.51)); +#372883 = DIRECTION('',(0.,-1.,0.)); +#372884 = DIRECTION('',(-1.,0.,0.)); +#372885 = ADVANCED_FACE('',(#372886),#372913,.T.); +#372886 = FACE_BOUND('',#372887,.T.); +#372887 = EDGE_LOOP('',(#372888,#372889,#372898,#372906)); +#372888 = ORIENTED_EDGE('',*,*,#372867,.T.); +#372889 = ORIENTED_EDGE('',*,*,#372890,.T.); +#372890 = EDGE_CURVE('',#372860,#372891,#372893,.T.); +#372891 = VERTEX_POINT('',#372892); +#372892 = CARTESIAN_POINT('',(124.52,-84.795,1.55)); +#372893 = CIRCLE('',#372894,0.139999827125); +#372894 = AXIS2_PLACEMENT_3D('',#372895,#372896,#372897); +#372895 = CARTESIAN_POINT('',(124.65999982712,-84.79500017287,1.55)); +#372896 = DIRECTION('',(0.,0.,-1.)); +#372897 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#372898 = ORIENTED_EDGE('',*,*,#372899,.F.); +#372899 = EDGE_CURVE('',#372900,#372891,#372902,.T.); +#372900 = VERTEX_POINT('',#372901); +#372901 = CARTESIAN_POINT('',(124.52,-84.795,1.51)); +#372902 = LINE('',#372903,#372904); +#372903 = CARTESIAN_POINT('',(124.52,-84.795,1.51)); +#372904 = VECTOR('',#372905,1.); +#372905 = DIRECTION('',(0.,0.,1.)); +#372906 = ORIENTED_EDGE('',*,*,#372907,.F.); +#372907 = EDGE_CURVE('',#372868,#372900,#372908,.T.); +#372908 = CIRCLE('',#372909,0.139999827125); +#372909 = AXIS2_PLACEMENT_3D('',#372910,#372911,#372912); +#372910 = CARTESIAN_POINT('',(124.65999982712,-84.79500017287,1.51)); +#372911 = DIRECTION('',(0.,0.,-1.)); +#372912 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#372913 = CYLINDRICAL_SURFACE('',#372914,0.139999827125); +#372914 = AXIS2_PLACEMENT_3D('',#372915,#372916,#372917); +#372915 = CARTESIAN_POINT('',(124.65999982712,-84.79500017287,1.51)); +#372916 = DIRECTION('',(0.,0.,-1.)); +#372917 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#372918 = ADVANCED_FACE('',(#372919),#372935,.T.); +#372919 = FACE_BOUND('',#372920,.T.); +#372920 = EDGE_LOOP('',(#372921,#372922,#372928,#372929)); +#372921 = ORIENTED_EDGE('',*,*,#372899,.T.); +#372922 = ORIENTED_EDGE('',*,*,#372923,.T.); +#372923 = EDGE_CURVE('',#372891,#372691,#372924,.T.); +#372924 = LINE('',#372925,#372926); +#372925 = CARTESIAN_POINT('',(124.52,-84.795,1.55)); +#372926 = VECTOR('',#372927,1.); +#372927 = DIRECTION('',(0.,1.,0.)); +#372928 = ORIENTED_EDGE('',*,*,#372688,.F.); +#372929 = ORIENTED_EDGE('',*,*,#372930,.F.); +#372930 = EDGE_CURVE('',#372900,#372689,#372931,.T.); +#372931 = LINE('',#372932,#372933); +#372932 = CARTESIAN_POINT('',(124.52,-84.795,1.51)); +#372933 = VECTOR('',#372934,1.); +#372934 = DIRECTION('',(0.,1.,0.)); +#372935 = PLANE('',#372936); +#372936 = AXIS2_PLACEMENT_3D('',#372937,#372938,#372939); +#372937 = CARTESIAN_POINT('',(124.52,-84.795,1.51)); +#372938 = DIRECTION('',(-1.,0.,0.)); +#372939 = DIRECTION('',(0.,1.,0.)); +#372940 = ADVANCED_FACE('',(#372941),#372951,.F.); +#372941 = FACE_BOUND('',#372942,.T.); +#372942 = EDGE_LOOP('',(#372943,#372944,#372945,#372946,#372947,#372948, + #372949,#372950)); +#372943 = ORIENTED_EDGE('',*,*,#372715,.T.); +#372944 = ORIENTED_EDGE('',*,*,#372747,.T.); +#372945 = ORIENTED_EDGE('',*,*,#372779,.T.); +#372946 = ORIENTED_EDGE('',*,*,#372811,.T.); +#372947 = ORIENTED_EDGE('',*,*,#372843,.T.); +#372948 = ORIENTED_EDGE('',*,*,#372875,.T.); +#372949 = ORIENTED_EDGE('',*,*,#372907,.T.); +#372950 = ORIENTED_EDGE('',*,*,#372930,.T.); +#372951 = PLANE('',#372952); +#372952 = AXIS2_PLACEMENT_3D('',#372953,#372954,#372955); +#372953 = CARTESIAN_POINT('',(0.,0.,1.51)); +#372954 = DIRECTION('',(0.,0.,1.)); +#372955 = DIRECTION('',(1.,0.,-0.)); +#372956 = ADVANCED_FACE('',(#372957),#372967,.T.); +#372957 = FACE_BOUND('',#372958,.F.); +#372958 = EDGE_LOOP('',(#372959,#372960,#372961,#372962,#372963,#372964, + #372965,#372966)); +#372959 = ORIENTED_EDGE('',*,*,#372698,.T.); +#372960 = ORIENTED_EDGE('',*,*,#372731,.T.); +#372961 = ORIENTED_EDGE('',*,*,#372762,.T.); +#372962 = ORIENTED_EDGE('',*,*,#372795,.T.); +#372963 = ORIENTED_EDGE('',*,*,#372826,.T.); +#372964 = ORIENTED_EDGE('',*,*,#372859,.T.); +#372965 = ORIENTED_EDGE('',*,*,#372890,.T.); +#372966 = ORIENTED_EDGE('',*,*,#372923,.T.); +#372967 = PLANE('',#372968); +#372968 = AXIS2_PLACEMENT_3D('',#372969,#372970,#372971); +#372969 = CARTESIAN_POINT('',(0.,0.,1.55)); +#372970 = DIRECTION('',(0.,0.,1.)); +#372971 = DIRECTION('',(1.,0.,-0.)); +#372972 = MANIFOLD_SOLID_BREP('',#372973); +#372973 = CLOSED_SHELL('',(#372974,#373016,#373047,#373080,#373111, + #373144,#373175,#373208,#373230,#373246)); +#372974 = ADVANCED_FACE('',(#372975),#373011,.T.); +#372975 = FACE_BOUND('',#372976,.T.); +#372976 = EDGE_LOOP('',(#372977,#372987,#372996,#373004)); +#372977 = ORIENTED_EDGE('',*,*,#372978,.T.); +#372978 = EDGE_CURVE('',#372979,#372981,#372983,.T.); +#372979 = VERTEX_POINT('',#372980); +#372980 = CARTESIAN_POINT('',(143.275,-129.,1.51)); +#372981 = VERTEX_POINT('',#372982); +#372982 = CARTESIAN_POINT('',(143.275,-129.,1.55)); +#372983 = LINE('',#372984,#372985); +#372984 = CARTESIAN_POINT('',(143.275,-129.,1.51)); +#372985 = VECTOR('',#372986,1.); +#372986 = DIRECTION('',(0.,0.,1.)); +#372987 = ORIENTED_EDGE('',*,*,#372988,.T.); +#372988 = EDGE_CURVE('',#372981,#372989,#372991,.T.); +#372989 = VERTEX_POINT('',#372990); +#372990 = CARTESIAN_POINT('',(143.5,-128.775,1.55)); +#372991 = CIRCLE('',#372992,0.225000087974); +#372992 = AXIS2_PLACEMENT_3D('',#372993,#372994,#372995); +#372993 = CARTESIAN_POINT('',(143.50000008797,-129.0000000879,1.55)); +#372994 = DIRECTION('',(0.,0.,-1.)); +#372995 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#372996 = ORIENTED_EDGE('',*,*,#372997,.F.); +#372997 = EDGE_CURVE('',#372998,#372989,#373000,.T.); +#372998 = VERTEX_POINT('',#372999); +#372999 = CARTESIAN_POINT('',(143.5,-128.775,1.51)); +#373000 = LINE('',#373001,#373002); +#373001 = CARTESIAN_POINT('',(143.5,-128.775,1.51)); +#373002 = VECTOR('',#373003,1.); +#373003 = DIRECTION('',(0.,0.,1.)); +#373004 = ORIENTED_EDGE('',*,*,#373005,.F.); +#373005 = EDGE_CURVE('',#372979,#372998,#373006,.T.); +#373006 = CIRCLE('',#373007,0.225000087974); +#373007 = AXIS2_PLACEMENT_3D('',#373008,#373009,#373010); +#373008 = CARTESIAN_POINT('',(143.50000008797,-129.0000000879,1.51)); +#373009 = DIRECTION('',(0.,0.,-1.)); +#373010 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#373011 = CYLINDRICAL_SURFACE('',#373012,0.225000087974); +#373012 = AXIS2_PLACEMENT_3D('',#373013,#373014,#373015); +#373013 = CARTESIAN_POINT('',(143.50000008797,-129.0000000879,1.51)); +#373014 = DIRECTION('',(0.,0.,-1.)); +#373015 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#373016 = ADVANCED_FACE('',(#373017),#373042,.T.); +#373017 = FACE_BOUND('',#373018,.T.); +#373018 = EDGE_LOOP('',(#373019,#373020,#373028,#373036)); +#373019 = ORIENTED_EDGE('',*,*,#372997,.T.); +#373020 = ORIENTED_EDGE('',*,*,#373021,.T.); +#373021 = EDGE_CURVE('',#372989,#373022,#373024,.T.); +#373022 = VERTEX_POINT('',#373023); +#373023 = CARTESIAN_POINT('',(144.,-128.775,1.55)); +#373024 = LINE('',#373025,#373026); +#373025 = CARTESIAN_POINT('',(143.5,-128.775,1.55)); +#373026 = VECTOR('',#373027,1.); +#373027 = DIRECTION('',(1.,0.,0.)); +#373028 = ORIENTED_EDGE('',*,*,#373029,.F.); +#373029 = EDGE_CURVE('',#373030,#373022,#373032,.T.); +#373030 = VERTEX_POINT('',#373031); +#373031 = CARTESIAN_POINT('',(144.,-128.775,1.51)); +#373032 = LINE('',#373033,#373034); +#373033 = CARTESIAN_POINT('',(144.,-128.775,1.51)); +#373034 = VECTOR('',#373035,1.); +#373035 = DIRECTION('',(0.,0.,1.)); +#373036 = ORIENTED_EDGE('',*,*,#373037,.F.); +#373037 = EDGE_CURVE('',#372998,#373030,#373038,.T.); +#373038 = LINE('',#373039,#373040); +#373039 = CARTESIAN_POINT('',(143.5,-128.775,1.51)); +#373040 = VECTOR('',#373041,1.); +#373041 = DIRECTION('',(1.,0.,0.)); +#373042 = PLANE('',#373043); +#373043 = AXIS2_PLACEMENT_3D('',#373044,#373045,#373046); +#373044 = CARTESIAN_POINT('',(143.5,-128.775,1.51)); +#373045 = DIRECTION('',(0.,1.,0.)); +#373046 = DIRECTION('',(1.,0.,0.)); +#373047 = ADVANCED_FACE('',(#373048),#373075,.T.); +#373048 = FACE_BOUND('',#373049,.T.); +#373049 = EDGE_LOOP('',(#373050,#373051,#373060,#373068)); +#373050 = ORIENTED_EDGE('',*,*,#373029,.T.); +#373051 = ORIENTED_EDGE('',*,*,#373052,.T.); +#373052 = EDGE_CURVE('',#373022,#373053,#373055,.T.); +#373053 = VERTEX_POINT('',#373054); +#373054 = CARTESIAN_POINT('',(144.225,-129.,1.55)); +#373055 = CIRCLE('',#373056,0.225000087974); +#373056 = AXIS2_PLACEMENT_3D('',#373057,#373058,#373059); +#373057 = CARTESIAN_POINT('',(143.99999991202,-129.0000000879,1.55)); +#373058 = DIRECTION('',(0.,0.,-1.)); +#373059 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#373060 = ORIENTED_EDGE('',*,*,#373061,.F.); +#373061 = EDGE_CURVE('',#373062,#373053,#373064,.T.); +#373062 = VERTEX_POINT('',#373063); +#373063 = CARTESIAN_POINT('',(144.225,-129.,1.51)); +#373064 = LINE('',#373065,#373066); +#373065 = CARTESIAN_POINT('',(144.225,-129.,1.51)); +#373066 = VECTOR('',#373067,1.); +#373067 = DIRECTION('',(0.,0.,1.)); +#373068 = ORIENTED_EDGE('',*,*,#373069,.F.); +#373069 = EDGE_CURVE('',#373030,#373062,#373070,.T.); +#373070 = CIRCLE('',#373071,0.225000087974); +#373071 = AXIS2_PLACEMENT_3D('',#373072,#373073,#373074); +#373072 = CARTESIAN_POINT('',(143.99999991202,-129.0000000879,1.51)); +#373073 = DIRECTION('',(0.,0.,-1.)); +#373074 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#373075 = CYLINDRICAL_SURFACE('',#373076,0.225000087974); +#373076 = AXIS2_PLACEMENT_3D('',#373077,#373078,#373079); +#373077 = CARTESIAN_POINT('',(143.99999991202,-129.0000000879,1.51)); +#373078 = DIRECTION('',(0.,0.,-1.)); +#373079 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#373080 = ADVANCED_FACE('',(#373081),#373106,.T.); +#373081 = FACE_BOUND('',#373082,.T.); +#373082 = EDGE_LOOP('',(#373083,#373084,#373092,#373100)); +#373083 = ORIENTED_EDGE('',*,*,#373061,.T.); +#373084 = ORIENTED_EDGE('',*,*,#373085,.T.); +#373085 = EDGE_CURVE('',#373053,#373086,#373088,.T.); +#373086 = VERTEX_POINT('',#373087); +#373087 = CARTESIAN_POINT('',(144.225,-129.45,1.55)); +#373088 = LINE('',#373089,#373090); +#373089 = CARTESIAN_POINT('',(144.225,-129.,1.55)); +#373090 = VECTOR('',#373091,1.); +#373091 = DIRECTION('',(0.,-1.,0.)); +#373092 = ORIENTED_EDGE('',*,*,#373093,.F.); +#373093 = EDGE_CURVE('',#373094,#373086,#373096,.T.); +#373094 = VERTEX_POINT('',#373095); +#373095 = CARTESIAN_POINT('',(144.225,-129.45,1.51)); +#373096 = LINE('',#373097,#373098); +#373097 = CARTESIAN_POINT('',(144.225,-129.45,1.51)); +#373098 = VECTOR('',#373099,1.); +#373099 = DIRECTION('',(0.,0.,1.)); +#373100 = ORIENTED_EDGE('',*,*,#373101,.F.); +#373101 = EDGE_CURVE('',#373062,#373094,#373102,.T.); +#373102 = LINE('',#373103,#373104); +#373103 = CARTESIAN_POINT('',(144.225,-129.,1.51)); +#373104 = VECTOR('',#373105,1.); +#373105 = DIRECTION('',(0.,-1.,0.)); +#373106 = PLANE('',#373107); +#373107 = AXIS2_PLACEMENT_3D('',#373108,#373109,#373110); +#373108 = CARTESIAN_POINT('',(144.225,-129.,1.51)); +#373109 = DIRECTION('',(1.,0.,-0.)); +#373110 = DIRECTION('',(0.,-1.,0.)); +#373111 = ADVANCED_FACE('',(#373112),#373139,.T.); +#373112 = FACE_BOUND('',#373113,.T.); +#373113 = EDGE_LOOP('',(#373114,#373115,#373124,#373132)); +#373114 = ORIENTED_EDGE('',*,*,#373093,.T.); +#373115 = ORIENTED_EDGE('',*,*,#373116,.T.); +#373116 = EDGE_CURVE('',#373086,#373117,#373119,.T.); +#373117 = VERTEX_POINT('',#373118); +#373118 = CARTESIAN_POINT('',(144.,-129.675,1.55)); +#373119 = CIRCLE('',#373120,0.225000087974); +#373120 = AXIS2_PLACEMENT_3D('',#373121,#373122,#373123); +#373121 = CARTESIAN_POINT('',(143.99999991202,-129.449999912,1.55)); +#373122 = DIRECTION('',(0.,0.,-1.)); +#373123 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#373124 = ORIENTED_EDGE('',*,*,#373125,.F.); +#373125 = EDGE_CURVE('',#373126,#373117,#373128,.T.); +#373126 = VERTEX_POINT('',#373127); +#373127 = CARTESIAN_POINT('',(144.,-129.675,1.51)); +#373128 = LINE('',#373129,#373130); +#373129 = CARTESIAN_POINT('',(144.,-129.675,1.51)); +#373130 = VECTOR('',#373131,1.); +#373131 = DIRECTION('',(0.,0.,1.)); +#373132 = ORIENTED_EDGE('',*,*,#373133,.F.); +#373133 = EDGE_CURVE('',#373094,#373126,#373134,.T.); +#373134 = CIRCLE('',#373135,0.225000087974); +#373135 = AXIS2_PLACEMENT_3D('',#373136,#373137,#373138); +#373136 = CARTESIAN_POINT('',(143.99999991202,-129.449999912,1.51)); +#373137 = DIRECTION('',(0.,0.,-1.)); +#373138 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#373139 = CYLINDRICAL_SURFACE('',#373140,0.225000087974); +#373140 = AXIS2_PLACEMENT_3D('',#373141,#373142,#373143); +#373141 = CARTESIAN_POINT('',(143.99999991202,-129.449999912,1.51)); +#373142 = DIRECTION('',(0.,0.,-1.)); +#373143 = DIRECTION('',(1.,-3.909955352945E-07,0.)); +#373144 = ADVANCED_FACE('',(#373145),#373170,.T.); +#373145 = FACE_BOUND('',#373146,.T.); +#373146 = EDGE_LOOP('',(#373147,#373148,#373156,#373164)); +#373147 = ORIENTED_EDGE('',*,*,#373125,.T.); +#373148 = ORIENTED_EDGE('',*,*,#373149,.T.); +#373149 = EDGE_CURVE('',#373117,#373150,#373152,.T.); +#373150 = VERTEX_POINT('',#373151); +#373151 = CARTESIAN_POINT('',(143.5,-129.675,1.55)); +#373152 = LINE('',#373153,#373154); +#373153 = CARTESIAN_POINT('',(144.,-129.675,1.55)); +#373154 = VECTOR('',#373155,1.); +#373155 = DIRECTION('',(-1.,0.,0.)); +#373156 = ORIENTED_EDGE('',*,*,#373157,.F.); +#373157 = EDGE_CURVE('',#373158,#373150,#373160,.T.); +#373158 = VERTEX_POINT('',#373159); +#373159 = CARTESIAN_POINT('',(143.5,-129.675,1.51)); +#373160 = LINE('',#373161,#373162); +#373161 = CARTESIAN_POINT('',(143.5,-129.675,1.51)); +#373162 = VECTOR('',#373163,1.); +#373163 = DIRECTION('',(0.,0.,1.)); +#373164 = ORIENTED_EDGE('',*,*,#373165,.F.); +#373165 = EDGE_CURVE('',#373126,#373158,#373166,.T.); +#373166 = LINE('',#373167,#373168); +#373167 = CARTESIAN_POINT('',(144.,-129.675,1.51)); +#373168 = VECTOR('',#373169,1.); +#373169 = DIRECTION('',(-1.,0.,0.)); +#373170 = PLANE('',#373171); +#373171 = AXIS2_PLACEMENT_3D('',#373172,#373173,#373174); +#373172 = CARTESIAN_POINT('',(144.,-129.675,1.51)); +#373173 = DIRECTION('',(0.,-1.,0.)); +#373174 = DIRECTION('',(-1.,0.,0.)); +#373175 = ADVANCED_FACE('',(#373176),#373203,.T.); +#373176 = FACE_BOUND('',#373177,.T.); +#373177 = EDGE_LOOP('',(#373178,#373179,#373188,#373196)); +#373178 = ORIENTED_EDGE('',*,*,#373157,.T.); +#373179 = ORIENTED_EDGE('',*,*,#373180,.T.); +#373180 = EDGE_CURVE('',#373150,#373181,#373183,.T.); +#373181 = VERTEX_POINT('',#373182); +#373182 = CARTESIAN_POINT('',(143.275,-129.45,1.55)); +#373183 = CIRCLE('',#373184,0.225000087974); +#373184 = AXIS2_PLACEMENT_3D('',#373185,#373186,#373187); +#373185 = CARTESIAN_POINT('',(143.50000008797,-129.449999912,1.55)); +#373186 = DIRECTION('',(0.,0.,-1.)); +#373187 = DIRECTION('',(-3.909956616132E-07,-1.,-0.)); +#373188 = ORIENTED_EDGE('',*,*,#373189,.F.); +#373189 = EDGE_CURVE('',#373190,#373181,#373192,.T.); +#373190 = VERTEX_POINT('',#373191); +#373191 = CARTESIAN_POINT('',(143.275,-129.45,1.51)); +#373192 = LINE('',#373193,#373194); +#373193 = CARTESIAN_POINT('',(143.275,-129.45,1.51)); +#373194 = VECTOR('',#373195,1.); +#373195 = DIRECTION('',(0.,0.,1.)); +#373196 = ORIENTED_EDGE('',*,*,#373197,.F.); +#373197 = EDGE_CURVE('',#373158,#373190,#373198,.T.); +#373198 = CIRCLE('',#373199,0.225000087974); +#373199 = AXIS2_PLACEMENT_3D('',#373200,#373201,#373202); +#373200 = CARTESIAN_POINT('',(143.50000008797,-129.449999912,1.51)); +#373201 = DIRECTION('',(0.,0.,-1.)); +#373202 = DIRECTION('',(-3.909956616132E-07,-1.,-0.)); +#373203 = CYLINDRICAL_SURFACE('',#373204,0.225000087974); +#373204 = AXIS2_PLACEMENT_3D('',#373205,#373206,#373207); +#373205 = CARTESIAN_POINT('',(143.50000008797,-129.449999912,1.51)); +#373206 = DIRECTION('',(0.,0.,-1.)); +#373207 = DIRECTION('',(-3.909956616132E-07,-1.,-0.)); +#373208 = ADVANCED_FACE('',(#373209),#373225,.T.); +#373209 = FACE_BOUND('',#373210,.T.); +#373210 = EDGE_LOOP('',(#373211,#373212,#373218,#373219)); +#373211 = ORIENTED_EDGE('',*,*,#373189,.T.); +#373212 = ORIENTED_EDGE('',*,*,#373213,.T.); +#373213 = EDGE_CURVE('',#373181,#372981,#373214,.T.); +#373214 = LINE('',#373215,#373216); +#373215 = CARTESIAN_POINT('',(143.275,-129.45,1.55)); +#373216 = VECTOR('',#373217,1.); +#373217 = DIRECTION('',(0.,1.,0.)); +#373218 = ORIENTED_EDGE('',*,*,#372978,.F.); +#373219 = ORIENTED_EDGE('',*,*,#373220,.F.); +#373220 = EDGE_CURVE('',#373190,#372979,#373221,.T.); +#373221 = LINE('',#373222,#373223); +#373222 = CARTESIAN_POINT('',(143.275,-129.45,1.51)); +#373223 = VECTOR('',#373224,1.); +#373224 = DIRECTION('',(0.,1.,0.)); +#373225 = PLANE('',#373226); +#373226 = AXIS2_PLACEMENT_3D('',#373227,#373228,#373229); +#373227 = CARTESIAN_POINT('',(143.275,-129.45,1.51)); +#373228 = DIRECTION('',(-1.,0.,0.)); +#373229 = DIRECTION('',(0.,1.,0.)); +#373230 = ADVANCED_FACE('',(#373231),#373241,.F.); +#373231 = FACE_BOUND('',#373232,.T.); +#373232 = EDGE_LOOP('',(#373233,#373234,#373235,#373236,#373237,#373238, + #373239,#373240)); +#373233 = ORIENTED_EDGE('',*,*,#373005,.T.); +#373234 = ORIENTED_EDGE('',*,*,#373037,.T.); +#373235 = ORIENTED_EDGE('',*,*,#373069,.T.); +#373236 = ORIENTED_EDGE('',*,*,#373101,.T.); +#373237 = ORIENTED_EDGE('',*,*,#373133,.T.); +#373238 = ORIENTED_EDGE('',*,*,#373165,.T.); +#373239 = ORIENTED_EDGE('',*,*,#373197,.T.); +#373240 = ORIENTED_EDGE('',*,*,#373220,.T.); +#373241 = PLANE('',#373242); +#373242 = AXIS2_PLACEMENT_3D('',#373243,#373244,#373245); +#373243 = CARTESIAN_POINT('',(0.,0.,1.51)); +#373244 = DIRECTION('',(0.,0.,1.)); +#373245 = DIRECTION('',(1.,0.,-0.)); +#373246 = ADVANCED_FACE('',(#373247),#373257,.T.); +#373247 = FACE_BOUND('',#373248,.F.); +#373248 = EDGE_LOOP('',(#373249,#373250,#373251,#373252,#373253,#373254, + #373255,#373256)); +#373249 = ORIENTED_EDGE('',*,*,#372988,.T.); +#373250 = ORIENTED_EDGE('',*,*,#373021,.T.); +#373251 = ORIENTED_EDGE('',*,*,#373052,.T.); +#373252 = ORIENTED_EDGE('',*,*,#373085,.T.); +#373253 = ORIENTED_EDGE('',*,*,#373116,.T.); +#373254 = ORIENTED_EDGE('',*,*,#373149,.T.); +#373255 = ORIENTED_EDGE('',*,*,#373180,.T.); +#373256 = ORIENTED_EDGE('',*,*,#373213,.T.); +#373257 = PLANE('',#373258); +#373258 = AXIS2_PLACEMENT_3D('',#373259,#373260,#373261); +#373259 = CARTESIAN_POINT('',(0.,0.,1.55)); +#373260 = DIRECTION('',(0.,0.,1.)); +#373261 = DIRECTION('',(1.,0.,-0.)); +#373262 = MANIFOLD_SOLID_BREP('',#373263); +#373263 = CLOSED_SHELL('',(#373264,#373297,#373317,#373337)); +#373264 = ADVANCED_FACE('',(#373265),#373292,.T.); +#373265 = FACE_BOUND('',#373266,.F.); +#373266 = EDGE_LOOP('',(#373267,#373277,#373284,#373285)); +#373267 = ORIENTED_EDGE('',*,*,#373268,.T.); +#373268 = EDGE_CURVE('',#373269,#373271,#373273,.T.); +#373269 = VERTEX_POINT('',#373270); +#373270 = CARTESIAN_POINT('',(136.025,-86.52,1.51)); +#373271 = VERTEX_POINT('',#373272); +#373272 = CARTESIAN_POINT('',(136.025,-86.52,1.55)); +#373273 = LINE('',#373274,#373275); +#373274 = CARTESIAN_POINT('',(136.025,-86.52,1.51)); +#373275 = VECTOR('',#373276,1.); +#373276 = DIRECTION('',(0.,0.,1.)); +#373277 = ORIENTED_EDGE('',*,*,#373278,.T.); +#373278 = EDGE_CURVE('',#373271,#373271,#373279,.T.); +#373279 = CIRCLE('',#373280,1.025); +#373280 = AXIS2_PLACEMENT_3D('',#373281,#373282,#373283); +#373281 = CARTESIAN_POINT('',(135.,-86.52,1.55)); +#373282 = DIRECTION('',(0.,0.,1.)); +#373283 = DIRECTION('',(1.,0.,-0.)); +#373284 = ORIENTED_EDGE('',*,*,#373268,.F.); +#373285 = ORIENTED_EDGE('',*,*,#373286,.F.); +#373286 = EDGE_CURVE('',#373269,#373269,#373287,.T.); +#373287 = CIRCLE('',#373288,1.025); +#373288 = AXIS2_PLACEMENT_3D('',#373289,#373290,#373291); +#373289 = CARTESIAN_POINT('',(135.,-86.52,1.51)); +#373290 = DIRECTION('',(0.,0.,1.)); +#373291 = DIRECTION('',(1.,0.,-0.)); +#373292 = CYLINDRICAL_SURFACE('',#373293,1.025); +#373293 = AXIS2_PLACEMENT_3D('',#373294,#373295,#373296); +#373294 = CARTESIAN_POINT('',(135.,-86.52,1.51)); +#373295 = DIRECTION('',(-0.,-0.,-1.)); +#373296 = DIRECTION('',(1.,0.,-0.)); +#373297 = ADVANCED_FACE('',(#373298,#373301),#373312,.F.); +#373298 = FACE_BOUND('',#373299,.F.); +#373299 = EDGE_LOOP('',(#373300)); +#373300 = ORIENTED_EDGE('',*,*,#373286,.T.); +#373301 = FACE_BOUND('',#373302,.F.); +#373302 = EDGE_LOOP('',(#373303)); +#373303 = ORIENTED_EDGE('',*,*,#373304,.T.); +#373304 = EDGE_CURVE('',#373305,#373305,#373307,.T.); +#373305 = VERTEX_POINT('',#373306); +#373306 = CARTESIAN_POINT('',(135.,-87.02,1.51)); +#373307 = CIRCLE('',#373308,0.5); +#373308 = AXIS2_PLACEMENT_3D('',#373309,#373310,#373311); +#373309 = CARTESIAN_POINT('',(135.,-86.52,1.51)); +#373310 = DIRECTION('',(-0.,0.,-1.)); +#373311 = DIRECTION('',(-0.,-1.,0.)); +#373312 = PLANE('',#373313); +#373313 = AXIS2_PLACEMENT_3D('',#373314,#373315,#373316); +#373314 = CARTESIAN_POINT('',(0.,0.,1.51)); +#373315 = DIRECTION('',(0.,0.,1.)); +#373316 = DIRECTION('',(1.,0.,-0.)); +#373317 = ADVANCED_FACE('',(#373318,#373321),#373332,.T.); +#373318 = FACE_BOUND('',#373319,.T.); +#373319 = EDGE_LOOP('',(#373320)); +#373320 = ORIENTED_EDGE('',*,*,#373278,.T.); +#373321 = FACE_BOUND('',#373322,.T.); +#373322 = EDGE_LOOP('',(#373323)); +#373323 = ORIENTED_EDGE('',*,*,#373324,.T.); +#373324 = EDGE_CURVE('',#373325,#373325,#373327,.T.); +#373325 = VERTEX_POINT('',#373326); +#373326 = CARTESIAN_POINT('',(135.,-87.02,1.55)); +#373327 = CIRCLE('',#373328,0.5); +#373328 = AXIS2_PLACEMENT_3D('',#373329,#373330,#373331); +#373329 = CARTESIAN_POINT('',(135.,-86.52,1.55)); +#373330 = DIRECTION('',(-0.,0.,-1.)); +#373331 = DIRECTION('',(-0.,-1.,0.)); +#373332 = PLANE('',#373333); +#373333 = AXIS2_PLACEMENT_3D('',#373334,#373335,#373336); +#373334 = CARTESIAN_POINT('',(0.,0.,1.55)); +#373335 = DIRECTION('',(0.,0.,1.)); +#373336 = DIRECTION('',(1.,0.,-0.)); +#373337 = ADVANCED_FACE('',(#373338),#373349,.F.); +#373338 = FACE_BOUND('',#373339,.T.); +#373339 = EDGE_LOOP('',(#373340,#373341,#373347,#373348)); +#373340 = ORIENTED_EDGE('',*,*,#373304,.T.); +#373341 = ORIENTED_EDGE('',*,*,#373342,.T.); +#373342 = EDGE_CURVE('',#373305,#373325,#373343,.T.); +#373343 = LINE('',#373344,#373345); +#373344 = CARTESIAN_POINT('',(135.,-87.02,-4.6E-02)); +#373345 = VECTOR('',#373346,1.); +#373346 = DIRECTION('',(0.,0.,1.)); +#373347 = ORIENTED_EDGE('',*,*,#373324,.F.); +#373348 = ORIENTED_EDGE('',*,*,#373342,.F.); +#373349 = CYLINDRICAL_SURFACE('',#373350,0.5); +#373350 = AXIS2_PLACEMENT_3D('',#373351,#373352,#373353); +#373351 = CARTESIAN_POINT('',(135.,-86.52,-4.6E-02)); +#373352 = DIRECTION('',(-0.,-0.,-1.)); +#373353 = DIRECTION('',(-0.,-1.,0.)); +#373354 = MANIFOLD_SOLID_BREP('',#373355); +#373355 = CLOSED_SHELL('',(#373356,#373389,#373409,#373429)); +#373356 = ADVANCED_FACE('',(#373357),#373384,.T.); +#373357 = FACE_BOUND('',#373358,.T.); +#373358 = EDGE_LOOP('',(#373359,#373369,#373376,#373377)); +#373359 = ORIENTED_EDGE('',*,*,#373360,.T.); +#373360 = EDGE_CURVE('',#373361,#373363,#373365,.T.); +#373361 = VERTEX_POINT('',#373362); +#373362 = CARTESIAN_POINT('',(136.025,-86.52,0.)); +#373363 = VERTEX_POINT('',#373364); +#373364 = CARTESIAN_POINT('',(136.025,-86.52,-4.E-02)); +#373365 = LINE('',#373366,#373367); +#373366 = CARTESIAN_POINT('',(136.025,-86.52,0.)); +#373367 = VECTOR('',#373368,1.); +#373368 = DIRECTION('',(0.,0.,-1.)); +#373369 = ORIENTED_EDGE('',*,*,#373370,.T.); +#373370 = EDGE_CURVE('',#373363,#373363,#373371,.T.); +#373371 = CIRCLE('',#373372,1.025); +#373372 = AXIS2_PLACEMENT_3D('',#373373,#373374,#373375); +#373373 = CARTESIAN_POINT('',(135.,-86.52,-4.E-02)); +#373374 = DIRECTION('',(0.,0.,1.)); +#373375 = DIRECTION('',(1.,0.,-0.)); +#373376 = ORIENTED_EDGE('',*,*,#373360,.F.); +#373377 = ORIENTED_EDGE('',*,*,#373378,.F.); +#373378 = EDGE_CURVE('',#373361,#373361,#373379,.T.); +#373379 = CIRCLE('',#373380,1.025); +#373380 = AXIS2_PLACEMENT_3D('',#373381,#373382,#373383); +#373381 = CARTESIAN_POINT('',(135.,-86.52,0.)); +#373382 = DIRECTION('',(0.,0.,1.)); +#373383 = DIRECTION('',(1.,0.,-0.)); +#373384 = CYLINDRICAL_SURFACE('',#373385,1.025); +#373385 = AXIS2_PLACEMENT_3D('',#373386,#373387,#373388); +#373386 = CARTESIAN_POINT('',(135.,-86.52,0.)); +#373387 = DIRECTION('',(0.,0.,1.)); +#373388 = DIRECTION('',(1.,0.,-0.)); +#373389 = ADVANCED_FACE('',(#373390,#373393),#373404,.F.); +#373390 = FACE_BOUND('',#373391,.F.); +#373391 = EDGE_LOOP('',(#373392)); +#373392 = ORIENTED_EDGE('',*,*,#373378,.F.); +#373393 = FACE_BOUND('',#373394,.F.); +#373394 = EDGE_LOOP('',(#373395)); +#373395 = ORIENTED_EDGE('',*,*,#373396,.F.); +#373396 = EDGE_CURVE('',#373397,#373397,#373399,.T.); +#373397 = VERTEX_POINT('',#373398); +#373398 = CARTESIAN_POINT('',(135.,-87.02,0.)); +#373399 = CIRCLE('',#373400,0.5); +#373400 = AXIS2_PLACEMENT_3D('',#373401,#373402,#373403); +#373401 = CARTESIAN_POINT('',(135.,-86.52,0.)); +#373402 = DIRECTION('',(-0.,0.,-1.)); +#373403 = DIRECTION('',(-0.,-1.,0.)); +#373404 = PLANE('',#373405); +#373405 = AXIS2_PLACEMENT_3D('',#373406,#373407,#373408); +#373406 = CARTESIAN_POINT('',(0.,0.,0.)); +#373407 = DIRECTION('',(-0.,-0.,-1.)); +#373408 = DIRECTION('',(-1.,0.,0.)); +#373409 = ADVANCED_FACE('',(#373410,#373413),#373424,.T.); +#373410 = FACE_BOUND('',#373411,.T.); +#373411 = EDGE_LOOP('',(#373412)); +#373412 = ORIENTED_EDGE('',*,*,#373370,.F.); +#373413 = FACE_BOUND('',#373414,.T.); +#373414 = EDGE_LOOP('',(#373415)); +#373415 = ORIENTED_EDGE('',*,*,#373416,.F.); +#373416 = EDGE_CURVE('',#373417,#373417,#373419,.T.); +#373417 = VERTEX_POINT('',#373418); +#373418 = CARTESIAN_POINT('',(135.,-87.02,-4.E-02)); +#373419 = CIRCLE('',#373420,0.5); +#373420 = AXIS2_PLACEMENT_3D('',#373421,#373422,#373423); +#373421 = CARTESIAN_POINT('',(135.,-86.52,-4.E-02)); +#373422 = DIRECTION('',(-0.,0.,-1.)); +#373423 = DIRECTION('',(-0.,-1.,0.)); +#373424 = PLANE('',#373425); +#373425 = AXIS2_PLACEMENT_3D('',#373426,#373427,#373428); +#373426 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#373427 = DIRECTION('',(-0.,-0.,-1.)); +#373428 = DIRECTION('',(-1.,0.,0.)); +#373429 = ADVANCED_FACE('',(#373430),#373441,.F.); +#373430 = FACE_BOUND('',#373431,.T.); +#373431 = EDGE_LOOP('',(#373432,#373433,#373439,#373440)); +#373432 = ORIENTED_EDGE('',*,*,#373416,.T.); +#373433 = ORIENTED_EDGE('',*,*,#373434,.T.); +#373434 = EDGE_CURVE('',#373417,#373397,#373435,.T.); +#373435 = LINE('',#373436,#373437); +#373436 = CARTESIAN_POINT('',(135.,-87.02,-4.6E-02)); +#373437 = VECTOR('',#373438,1.); +#373438 = DIRECTION('',(0.,0.,1.)); +#373439 = ORIENTED_EDGE('',*,*,#373396,.F.); +#373440 = ORIENTED_EDGE('',*,*,#373434,.F.); +#373441 = CYLINDRICAL_SURFACE('',#373442,0.5); +#373442 = AXIS2_PLACEMENT_3D('',#373443,#373444,#373445); +#373443 = CARTESIAN_POINT('',(135.,-86.52,-4.6E-02)); +#373444 = DIRECTION('',(-0.,-0.,-1.)); +#373445 = DIRECTION('',(-0.,-1.,0.)); +#373446 = MANIFOLD_SOLID_BREP('',#373447); +#373447 = CLOSED_SHELL('',(#373448,#373481,#373501,#373521)); +#373448 = ADVANCED_FACE('',(#373449),#373476,.T.); +#373449 = FACE_BOUND('',#373450,.F.); +#373450 = EDGE_LOOP('',(#373451,#373461,#373468,#373469)); +#373451 = ORIENTED_EDGE('',*,*,#373452,.T.); +#373452 = EDGE_CURVE('',#373453,#373455,#373457,.T.); +#373453 = VERTEX_POINT('',#373454); +#373454 = CARTESIAN_POINT('',(135.,-87.045,-4.E-02)); +#373455 = VERTEX_POINT('',#373456); +#373456 = CARTESIAN_POINT('',(135.,-87.045,1.55)); +#373457 = LINE('',#373458,#373459); +#373458 = CARTESIAN_POINT('',(135.,-87.045,-4.E-02)); +#373459 = VECTOR('',#373460,1.); +#373460 = DIRECTION('',(0.,0.,1.)); +#373461 = ORIENTED_EDGE('',*,*,#373462,.T.); +#373462 = EDGE_CURVE('',#373455,#373455,#373463,.T.); +#373463 = CIRCLE('',#373464,0.525); +#373464 = AXIS2_PLACEMENT_3D('',#373465,#373466,#373467); +#373465 = CARTESIAN_POINT('',(135.,-86.52,1.55)); +#373466 = DIRECTION('',(0.,0.,1.)); +#373467 = DIRECTION('',(-0.,-1.,0.)); +#373468 = ORIENTED_EDGE('',*,*,#373452,.F.); +#373469 = ORIENTED_EDGE('',*,*,#373470,.F.); +#373470 = EDGE_CURVE('',#373453,#373453,#373471,.T.); +#373471 = CIRCLE('',#373472,0.525); +#373472 = AXIS2_PLACEMENT_3D('',#373473,#373474,#373475); +#373473 = CARTESIAN_POINT('',(135.,-86.52,-4.E-02)); +#373474 = DIRECTION('',(0.,0.,1.)); +#373475 = DIRECTION('',(-0.,-1.,0.)); +#373476 = CYLINDRICAL_SURFACE('',#373477,0.525); +#373477 = AXIS2_PLACEMENT_3D('',#373478,#373479,#373480); +#373478 = CARTESIAN_POINT('',(135.,-86.52,-4.E-02)); +#373479 = DIRECTION('',(-0.,-0.,-1.)); +#373480 = DIRECTION('',(-0.,-1.,0.)); +#373481 = ADVANCED_FACE('',(#373482,#373485),#373496,.F.); +#373482 = FACE_BOUND('',#373483,.F.); +#373483 = EDGE_LOOP('',(#373484)); +#373484 = ORIENTED_EDGE('',*,*,#373470,.T.); +#373485 = FACE_BOUND('',#373486,.F.); +#373486 = EDGE_LOOP('',(#373487)); +#373487 = ORIENTED_EDGE('',*,*,#373488,.T.); +#373488 = EDGE_CURVE('',#373489,#373489,#373491,.T.); +#373489 = VERTEX_POINT('',#373490); +#373490 = CARTESIAN_POINT('',(135.,-87.02,-4.E-02)); +#373491 = CIRCLE('',#373492,0.5); +#373492 = AXIS2_PLACEMENT_3D('',#373493,#373494,#373495); +#373493 = CARTESIAN_POINT('',(135.,-86.52,-4.E-02)); +#373494 = DIRECTION('',(-0.,0.,-1.)); +#373495 = DIRECTION('',(-0.,-1.,0.)); +#373496 = PLANE('',#373497); +#373497 = AXIS2_PLACEMENT_3D('',#373498,#373499,#373500); +#373498 = CARTESIAN_POINT('',(135.,-87.045,-4.E-02)); +#373499 = DIRECTION('',(0.,0.,1.)); +#373500 = DIRECTION('',(1.,0.,-0.)); +#373501 = ADVANCED_FACE('',(#373502,#373505),#373516,.T.); +#373502 = FACE_BOUND('',#373503,.T.); +#373503 = EDGE_LOOP('',(#373504)); +#373504 = ORIENTED_EDGE('',*,*,#373462,.T.); +#373505 = FACE_BOUND('',#373506,.T.); +#373506 = EDGE_LOOP('',(#373507)); +#373507 = ORIENTED_EDGE('',*,*,#373508,.T.); +#373508 = EDGE_CURVE('',#373509,#373509,#373511,.T.); +#373509 = VERTEX_POINT('',#373510); +#373510 = CARTESIAN_POINT('',(135.,-87.02,1.55)); +#373511 = CIRCLE('',#373512,0.5); +#373512 = AXIS2_PLACEMENT_3D('',#373513,#373514,#373515); +#373513 = CARTESIAN_POINT('',(135.,-86.52,1.55)); +#373514 = DIRECTION('',(-0.,0.,-1.)); +#373515 = DIRECTION('',(-0.,-1.,0.)); +#373516 = PLANE('',#373517); +#373517 = AXIS2_PLACEMENT_3D('',#373518,#373519,#373520); +#373518 = CARTESIAN_POINT('',(135.,-87.045,1.55)); +#373519 = DIRECTION('',(0.,0.,1.)); +#373520 = DIRECTION('',(1.,0.,-0.)); +#373521 = ADVANCED_FACE('',(#373522),#373533,.F.); +#373522 = FACE_BOUND('',#373523,.T.); +#373523 = EDGE_LOOP('',(#373524,#373525,#373531,#373532)); +#373524 = ORIENTED_EDGE('',*,*,#373488,.T.); +#373525 = ORIENTED_EDGE('',*,*,#373526,.T.); +#373526 = EDGE_CURVE('',#373489,#373509,#373527,.T.); +#373527 = LINE('',#373528,#373529); +#373528 = CARTESIAN_POINT('',(135.,-87.02,-4.6E-02)); +#373529 = VECTOR('',#373530,1.); +#373530 = DIRECTION('',(0.,0.,1.)); +#373531 = ORIENTED_EDGE('',*,*,#373508,.F.); +#373532 = ORIENTED_EDGE('',*,*,#373526,.F.); +#373533 = CYLINDRICAL_SURFACE('',#373534,0.5); +#373534 = AXIS2_PLACEMENT_3D('',#373535,#373536,#373537); +#373535 = CARTESIAN_POINT('',(135.,-86.52,-4.6E-02)); +#373536 = DIRECTION('',(-0.,-0.,-1.)); +#373537 = DIRECTION('',(-0.,-1.,0.)); +#373538 = MANIFOLD_SOLID_BREP('',#373539); +#373539 = CLOSED_SHELL('',(#373540,#373573,#373593,#373613)); +#373540 = ADVANCED_FACE('',(#373541),#373568,.T.); +#373541 = FACE_BOUND('',#373542,.F.); +#373542 = EDGE_LOOP('',(#373543,#373553,#373560,#373561)); +#373543 = ORIENTED_EDGE('',*,*,#373544,.T.); +#373544 = EDGE_CURVE('',#373545,#373547,#373549,.T.); +#373545 = VERTEX_POINT('',#373546); +#373546 = CARTESIAN_POINT('',(147.255,-92.75,1.51)); +#373547 = VERTEX_POINT('',#373548); +#373548 = CARTESIAN_POINT('',(147.255,-92.75,1.55)); +#373549 = LINE('',#373550,#373551); +#373550 = CARTESIAN_POINT('',(147.255,-92.75,1.51)); +#373551 = VECTOR('',#373552,1.); +#373552 = DIRECTION('',(0.,0.,1.)); +#373553 = ORIENTED_EDGE('',*,*,#373554,.T.); +#373554 = EDGE_CURVE('',#373547,#373547,#373555,.T.); +#373555 = CIRCLE('',#373556,1.025); +#373556 = AXIS2_PLACEMENT_3D('',#373557,#373558,#373559); +#373557 = CARTESIAN_POINT('',(146.23,-92.75,1.55)); +#373558 = DIRECTION('',(0.,0.,1.)); +#373559 = DIRECTION('',(1.,0.,-0.)); +#373560 = ORIENTED_EDGE('',*,*,#373544,.F.); +#373561 = ORIENTED_EDGE('',*,*,#373562,.F.); +#373562 = EDGE_CURVE('',#373545,#373545,#373563,.T.); +#373563 = CIRCLE('',#373564,1.025); +#373564 = AXIS2_PLACEMENT_3D('',#373565,#373566,#373567); +#373565 = CARTESIAN_POINT('',(146.23,-92.75,1.51)); +#373566 = DIRECTION('',(0.,0.,1.)); +#373567 = DIRECTION('',(1.,0.,-0.)); +#373568 = CYLINDRICAL_SURFACE('',#373569,1.025); +#373569 = AXIS2_PLACEMENT_3D('',#373570,#373571,#373572); +#373570 = CARTESIAN_POINT('',(146.23,-92.75,1.51)); +#373571 = DIRECTION('',(-0.,-0.,-1.)); +#373572 = DIRECTION('',(1.,0.,-0.)); +#373573 = ADVANCED_FACE('',(#373574,#373577),#373588,.F.); +#373574 = FACE_BOUND('',#373575,.F.); +#373575 = EDGE_LOOP('',(#373576)); +#373576 = ORIENTED_EDGE('',*,*,#373562,.T.); +#373577 = FACE_BOUND('',#373578,.F.); +#373578 = EDGE_LOOP('',(#373579)); +#373579 = ORIENTED_EDGE('',*,*,#373580,.T.); +#373580 = EDGE_CURVE('',#373581,#373581,#373583,.T.); +#373581 = VERTEX_POINT('',#373582); +#373582 = CARTESIAN_POINT('',(146.23,-93.25,1.51)); +#373583 = CIRCLE('',#373584,0.5); +#373584 = AXIS2_PLACEMENT_3D('',#373585,#373586,#373587); +#373585 = CARTESIAN_POINT('',(146.23,-92.75,1.51)); +#373586 = DIRECTION('',(-0.,0.,-1.)); +#373587 = DIRECTION('',(-0.,-1.,0.)); +#373588 = PLANE('',#373589); +#373589 = AXIS2_PLACEMENT_3D('',#373590,#373591,#373592); +#373590 = CARTESIAN_POINT('',(0.,0.,1.51)); +#373591 = DIRECTION('',(0.,0.,1.)); +#373592 = DIRECTION('',(1.,0.,-0.)); +#373593 = ADVANCED_FACE('',(#373594,#373597),#373608,.T.); +#373594 = FACE_BOUND('',#373595,.T.); +#373595 = EDGE_LOOP('',(#373596)); +#373596 = ORIENTED_EDGE('',*,*,#373554,.T.); +#373597 = FACE_BOUND('',#373598,.T.); +#373598 = EDGE_LOOP('',(#373599)); +#373599 = ORIENTED_EDGE('',*,*,#373600,.T.); +#373600 = EDGE_CURVE('',#373601,#373601,#373603,.T.); +#373601 = VERTEX_POINT('',#373602); +#373602 = CARTESIAN_POINT('',(146.23,-93.25,1.55)); +#373603 = CIRCLE('',#373604,0.5); +#373604 = AXIS2_PLACEMENT_3D('',#373605,#373606,#373607); +#373605 = CARTESIAN_POINT('',(146.23,-92.75,1.55)); +#373606 = DIRECTION('',(-0.,0.,-1.)); +#373607 = DIRECTION('',(-0.,-1.,0.)); +#373608 = PLANE('',#373609); +#373609 = AXIS2_PLACEMENT_3D('',#373610,#373611,#373612); +#373610 = CARTESIAN_POINT('',(0.,0.,1.55)); +#373611 = DIRECTION('',(0.,0.,1.)); +#373612 = DIRECTION('',(1.,0.,-0.)); +#373613 = ADVANCED_FACE('',(#373614),#373625,.F.); +#373614 = FACE_BOUND('',#373615,.T.); +#373615 = EDGE_LOOP('',(#373616,#373617,#373623,#373624)); +#373616 = ORIENTED_EDGE('',*,*,#373580,.T.); +#373617 = ORIENTED_EDGE('',*,*,#373618,.T.); +#373618 = EDGE_CURVE('',#373581,#373601,#373619,.T.); +#373619 = LINE('',#373620,#373621); +#373620 = CARTESIAN_POINT('',(146.23,-93.25,-4.6E-02)); +#373621 = VECTOR('',#373622,1.); +#373622 = DIRECTION('',(0.,0.,1.)); +#373623 = ORIENTED_EDGE('',*,*,#373600,.F.); +#373624 = ORIENTED_EDGE('',*,*,#373618,.F.); +#373625 = CYLINDRICAL_SURFACE('',#373626,0.5); +#373626 = AXIS2_PLACEMENT_3D('',#373627,#373628,#373629); +#373627 = CARTESIAN_POINT('',(146.23,-92.75,-4.6E-02)); +#373628 = DIRECTION('',(-0.,-0.,-1.)); +#373629 = DIRECTION('',(-0.,-1.,0.)); +#373630 = MANIFOLD_SOLID_BREP('',#373631); +#373631 = CLOSED_SHELL('',(#373632,#373665,#373685,#373705)); +#373632 = ADVANCED_FACE('',(#373633),#373660,.T.); +#373633 = FACE_BOUND('',#373634,.T.); +#373634 = EDGE_LOOP('',(#373635,#373645,#373652,#373653)); +#373635 = ORIENTED_EDGE('',*,*,#373636,.T.); +#373636 = EDGE_CURVE('',#373637,#373639,#373641,.T.); +#373637 = VERTEX_POINT('',#373638); +#373638 = CARTESIAN_POINT('',(147.255,-92.75,0.)); +#373639 = VERTEX_POINT('',#373640); +#373640 = CARTESIAN_POINT('',(147.255,-92.75,-4.E-02)); +#373641 = LINE('',#373642,#373643); +#373642 = CARTESIAN_POINT('',(147.255,-92.75,0.)); +#373643 = VECTOR('',#373644,1.); +#373644 = DIRECTION('',(0.,0.,-1.)); +#373645 = ORIENTED_EDGE('',*,*,#373646,.T.); +#373646 = EDGE_CURVE('',#373639,#373639,#373647,.T.); +#373647 = CIRCLE('',#373648,1.025); +#373648 = AXIS2_PLACEMENT_3D('',#373649,#373650,#373651); +#373649 = CARTESIAN_POINT('',(146.23,-92.75,-4.E-02)); +#373650 = DIRECTION('',(0.,0.,1.)); +#373651 = DIRECTION('',(1.,0.,-0.)); +#373652 = ORIENTED_EDGE('',*,*,#373636,.F.); +#373653 = ORIENTED_EDGE('',*,*,#373654,.F.); +#373654 = EDGE_CURVE('',#373637,#373637,#373655,.T.); +#373655 = CIRCLE('',#373656,1.025); +#373656 = AXIS2_PLACEMENT_3D('',#373657,#373658,#373659); +#373657 = CARTESIAN_POINT('',(146.23,-92.75,0.)); +#373658 = DIRECTION('',(0.,0.,1.)); +#373659 = DIRECTION('',(1.,0.,-0.)); +#373660 = CYLINDRICAL_SURFACE('',#373661,1.025); +#373661 = AXIS2_PLACEMENT_3D('',#373662,#373663,#373664); +#373662 = CARTESIAN_POINT('',(146.23,-92.75,0.)); +#373663 = DIRECTION('',(0.,0.,1.)); +#373664 = DIRECTION('',(1.,0.,-0.)); +#373665 = ADVANCED_FACE('',(#373666,#373669),#373680,.F.); +#373666 = FACE_BOUND('',#373667,.F.); +#373667 = EDGE_LOOP('',(#373668)); +#373668 = ORIENTED_EDGE('',*,*,#373654,.F.); +#373669 = FACE_BOUND('',#373670,.F.); +#373670 = EDGE_LOOP('',(#373671)); +#373671 = ORIENTED_EDGE('',*,*,#373672,.F.); +#373672 = EDGE_CURVE('',#373673,#373673,#373675,.T.); +#373673 = VERTEX_POINT('',#373674); +#373674 = CARTESIAN_POINT('',(146.23,-93.25,0.)); +#373675 = CIRCLE('',#373676,0.5); +#373676 = AXIS2_PLACEMENT_3D('',#373677,#373678,#373679); +#373677 = CARTESIAN_POINT('',(146.23,-92.75,0.)); +#373678 = DIRECTION('',(-0.,0.,-1.)); +#373679 = DIRECTION('',(-0.,-1.,0.)); +#373680 = PLANE('',#373681); +#373681 = AXIS2_PLACEMENT_3D('',#373682,#373683,#373684); +#373682 = CARTESIAN_POINT('',(0.,0.,0.)); +#373683 = DIRECTION('',(-0.,-0.,-1.)); +#373684 = DIRECTION('',(-1.,0.,0.)); +#373685 = ADVANCED_FACE('',(#373686,#373689),#373700,.T.); +#373686 = FACE_BOUND('',#373687,.T.); +#373687 = EDGE_LOOP('',(#373688)); +#373688 = ORIENTED_EDGE('',*,*,#373646,.F.); +#373689 = FACE_BOUND('',#373690,.T.); +#373690 = EDGE_LOOP('',(#373691)); +#373691 = ORIENTED_EDGE('',*,*,#373692,.F.); +#373692 = EDGE_CURVE('',#373693,#373693,#373695,.T.); +#373693 = VERTEX_POINT('',#373694); +#373694 = CARTESIAN_POINT('',(146.23,-93.25,-4.E-02)); +#373695 = CIRCLE('',#373696,0.5); +#373696 = AXIS2_PLACEMENT_3D('',#373697,#373698,#373699); +#373697 = CARTESIAN_POINT('',(146.23,-92.75,-4.E-02)); +#373698 = DIRECTION('',(-0.,0.,-1.)); +#373699 = DIRECTION('',(-0.,-1.,0.)); +#373700 = PLANE('',#373701); +#373701 = AXIS2_PLACEMENT_3D('',#373702,#373703,#373704); +#373702 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#373703 = DIRECTION('',(-0.,-0.,-1.)); +#373704 = DIRECTION('',(-1.,0.,0.)); +#373705 = ADVANCED_FACE('',(#373706),#373717,.F.); +#373706 = FACE_BOUND('',#373707,.T.); +#373707 = EDGE_LOOP('',(#373708,#373709,#373715,#373716)); +#373708 = ORIENTED_EDGE('',*,*,#373692,.T.); +#373709 = ORIENTED_EDGE('',*,*,#373710,.T.); +#373710 = EDGE_CURVE('',#373693,#373673,#373711,.T.); +#373711 = LINE('',#373712,#373713); +#373712 = CARTESIAN_POINT('',(146.23,-93.25,-4.6E-02)); +#373713 = VECTOR('',#373714,1.); +#373714 = DIRECTION('',(0.,0.,1.)); +#373715 = ORIENTED_EDGE('',*,*,#373672,.F.); +#373716 = ORIENTED_EDGE('',*,*,#373710,.F.); +#373717 = CYLINDRICAL_SURFACE('',#373718,0.5); +#373718 = AXIS2_PLACEMENT_3D('',#373719,#373720,#373721); +#373719 = CARTESIAN_POINT('',(146.23,-92.75,-4.6E-02)); +#373720 = DIRECTION('',(-0.,-0.,-1.)); +#373721 = DIRECTION('',(-0.,-1.,0.)); +#373722 = MANIFOLD_SOLID_BREP('',#373723); +#373723 = CLOSED_SHELL('',(#373724,#373757,#373777,#373797)); +#373724 = ADVANCED_FACE('',(#373725),#373752,.T.); +#373725 = FACE_BOUND('',#373726,.F.); +#373726 = EDGE_LOOP('',(#373727,#373737,#373744,#373745)); +#373727 = ORIENTED_EDGE('',*,*,#373728,.T.); +#373728 = EDGE_CURVE('',#373729,#373731,#373733,.T.); +#373729 = VERTEX_POINT('',#373730); +#373730 = CARTESIAN_POINT('',(146.23,-93.275,-4.E-02)); +#373731 = VERTEX_POINT('',#373732); +#373732 = CARTESIAN_POINT('',(146.23,-93.275,1.55)); +#373733 = LINE('',#373734,#373735); +#373734 = CARTESIAN_POINT('',(146.23,-93.275,-4.E-02)); +#373735 = VECTOR('',#373736,1.); +#373736 = DIRECTION('',(0.,0.,1.)); +#373737 = ORIENTED_EDGE('',*,*,#373738,.T.); +#373738 = EDGE_CURVE('',#373731,#373731,#373739,.T.); +#373739 = CIRCLE('',#373740,0.525); +#373740 = AXIS2_PLACEMENT_3D('',#373741,#373742,#373743); +#373741 = CARTESIAN_POINT('',(146.23,-92.75,1.55)); +#373742 = DIRECTION('',(0.,0.,1.)); +#373743 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#373744 = ORIENTED_EDGE('',*,*,#373728,.F.); +#373745 = ORIENTED_EDGE('',*,*,#373746,.F.); +#373746 = EDGE_CURVE('',#373729,#373729,#373747,.T.); +#373747 = CIRCLE('',#373748,0.525); +#373748 = AXIS2_PLACEMENT_3D('',#373749,#373750,#373751); +#373749 = CARTESIAN_POINT('',(146.23,-92.75,-4.E-02)); +#373750 = DIRECTION('',(0.,0.,1.)); +#373751 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#373752 = CYLINDRICAL_SURFACE('',#373753,0.525); +#373753 = AXIS2_PLACEMENT_3D('',#373754,#373755,#373756); +#373754 = CARTESIAN_POINT('',(146.23,-92.75,-4.E-02)); +#373755 = DIRECTION('',(-0.,-0.,-1.)); +#373756 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#373757 = ADVANCED_FACE('',(#373758,#373761),#373772,.F.); +#373758 = FACE_BOUND('',#373759,.F.); +#373759 = EDGE_LOOP('',(#373760)); +#373760 = ORIENTED_EDGE('',*,*,#373746,.T.); +#373761 = FACE_BOUND('',#373762,.F.); +#373762 = EDGE_LOOP('',(#373763)); +#373763 = ORIENTED_EDGE('',*,*,#373764,.T.); +#373764 = EDGE_CURVE('',#373765,#373765,#373767,.T.); +#373765 = VERTEX_POINT('',#373766); +#373766 = CARTESIAN_POINT('',(146.23,-93.25,-4.E-02)); +#373767 = CIRCLE('',#373768,0.5); +#373768 = AXIS2_PLACEMENT_3D('',#373769,#373770,#373771); +#373769 = CARTESIAN_POINT('',(146.23,-92.75,-4.E-02)); +#373770 = DIRECTION('',(-0.,0.,-1.)); +#373771 = DIRECTION('',(-0.,-1.,0.)); +#373772 = PLANE('',#373773); +#373773 = AXIS2_PLACEMENT_3D('',#373774,#373775,#373776); +#373774 = CARTESIAN_POINT('',(146.23,-93.275,-4.E-02)); +#373775 = DIRECTION('',(0.,0.,1.)); +#373776 = DIRECTION('',(1.,0.,-0.)); +#373777 = ADVANCED_FACE('',(#373778,#373781),#373792,.T.); +#373778 = FACE_BOUND('',#373779,.T.); +#373779 = EDGE_LOOP('',(#373780)); +#373780 = ORIENTED_EDGE('',*,*,#373738,.T.); +#373781 = FACE_BOUND('',#373782,.T.); +#373782 = EDGE_LOOP('',(#373783)); +#373783 = ORIENTED_EDGE('',*,*,#373784,.T.); +#373784 = EDGE_CURVE('',#373785,#373785,#373787,.T.); +#373785 = VERTEX_POINT('',#373786); +#373786 = CARTESIAN_POINT('',(146.23,-93.25,1.55)); +#373787 = CIRCLE('',#373788,0.5); +#373788 = AXIS2_PLACEMENT_3D('',#373789,#373790,#373791); +#373789 = CARTESIAN_POINT('',(146.23,-92.75,1.55)); +#373790 = DIRECTION('',(-0.,0.,-1.)); +#373791 = DIRECTION('',(-0.,-1.,0.)); +#373792 = PLANE('',#373793); +#373793 = AXIS2_PLACEMENT_3D('',#373794,#373795,#373796); +#373794 = CARTESIAN_POINT('',(146.23,-93.275,1.55)); +#373795 = DIRECTION('',(0.,0.,1.)); +#373796 = DIRECTION('',(1.,0.,-0.)); +#373797 = ADVANCED_FACE('',(#373798),#373809,.F.); +#373798 = FACE_BOUND('',#373799,.T.); +#373799 = EDGE_LOOP('',(#373800,#373801,#373807,#373808)); +#373800 = ORIENTED_EDGE('',*,*,#373764,.T.); +#373801 = ORIENTED_EDGE('',*,*,#373802,.T.); +#373802 = EDGE_CURVE('',#373765,#373785,#373803,.T.); +#373803 = LINE('',#373804,#373805); +#373804 = CARTESIAN_POINT('',(146.23,-93.25,-4.6E-02)); +#373805 = VECTOR('',#373806,1.); +#373806 = DIRECTION('',(0.,0.,1.)); +#373807 = ORIENTED_EDGE('',*,*,#373784,.F.); +#373808 = ORIENTED_EDGE('',*,*,#373802,.F.); +#373809 = CYLINDRICAL_SURFACE('',#373810,0.5); +#373810 = AXIS2_PLACEMENT_3D('',#373811,#373812,#373813); +#373811 = CARTESIAN_POINT('',(146.23,-92.75,-4.6E-02)); +#373812 = DIRECTION('',(-0.,-0.,-1.)); +#373813 = DIRECTION('',(-0.,-1.,0.)); +#373814 = MANIFOLD_SOLID_BREP('',#373815); +#373815 = CLOSED_SHELL('',(#373816,#373858,#373889,#373922,#373953, + #373986,#374017,#374050,#374072,#374088)); +#373816 = ADVANCED_FACE('',(#373817),#373853,.T.); +#373817 = FACE_BOUND('',#373818,.T.); +#373818 = EDGE_LOOP('',(#373819,#373829,#373838,#373846)); +#373819 = ORIENTED_EDGE('',*,*,#373820,.T.); +#373820 = EDGE_CURVE('',#373821,#373823,#373825,.T.); +#373821 = VERTEX_POINT('',#373822); +#373822 = CARTESIAN_POINT('',(127.19,-65.22,1.51)); +#373823 = VERTEX_POINT('',#373824); +#373824 = CARTESIAN_POINT('',(127.19,-65.22,1.55)); +#373825 = LINE('',#373826,#373827); +#373826 = CARTESIAN_POINT('',(127.19,-65.22,1.51)); +#373827 = VECTOR('',#373828,1.); +#373828 = DIRECTION('',(0.,0.,1.)); +#373829 = ORIENTED_EDGE('',*,*,#373830,.T.); +#373830 = EDGE_CURVE('',#373823,#373831,#373833,.T.); +#373831 = VERTEX_POINT('',#373832); +#373832 = CARTESIAN_POINT('',(127.33,-65.08,1.55)); +#373833 = CIRCLE('',#373834,0.139999827125); +#373834 = AXIS2_PLACEMENT_3D('',#373835,#373836,#373837); +#373835 = CARTESIAN_POINT('',(127.32999982712,-65.21999982712,1.55)); +#373836 = DIRECTION('',(0.,0.,-1.)); +#373837 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#373838 = ORIENTED_EDGE('',*,*,#373839,.F.); +#373839 = EDGE_CURVE('',#373840,#373831,#373842,.T.); +#373840 = VERTEX_POINT('',#373841); +#373841 = CARTESIAN_POINT('',(127.33,-65.08,1.51)); +#373842 = LINE('',#373843,#373844); +#373843 = CARTESIAN_POINT('',(127.33,-65.08,1.51)); +#373844 = VECTOR('',#373845,1.); +#373845 = DIRECTION('',(0.,0.,1.)); +#373846 = ORIENTED_EDGE('',*,*,#373847,.F.); +#373847 = EDGE_CURVE('',#373821,#373840,#373848,.T.); +#373848 = CIRCLE('',#373849,0.139999827125); +#373849 = AXIS2_PLACEMENT_3D('',#373850,#373851,#373852); +#373850 = CARTESIAN_POINT('',(127.32999982712,-65.21999982712,1.51)); +#373851 = DIRECTION('',(0.,0.,-1.)); +#373852 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#373853 = CYLINDRICAL_SURFACE('',#373854,0.139999827125); +#373854 = AXIS2_PLACEMENT_3D('',#373855,#373856,#373857); +#373855 = CARTESIAN_POINT('',(127.32999982712,-65.21999982712,1.51)); +#373856 = DIRECTION('',(0.,0.,-1.)); +#373857 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#373858 = ADVANCED_FACE('',(#373859),#373884,.T.); +#373859 = FACE_BOUND('',#373860,.T.); +#373860 = EDGE_LOOP('',(#373861,#373862,#373870,#373878)); +#373861 = ORIENTED_EDGE('',*,*,#373839,.T.); +#373862 = ORIENTED_EDGE('',*,*,#373863,.T.); +#373863 = EDGE_CURVE('',#373831,#373864,#373866,.T.); +#373864 = VERTEX_POINT('',#373865); +#373865 = CARTESIAN_POINT('',(127.67,-65.08,1.55)); +#373866 = LINE('',#373867,#373868); +#373867 = CARTESIAN_POINT('',(127.33,-65.08,1.55)); +#373868 = VECTOR('',#373869,1.); +#373869 = DIRECTION('',(1.,0.,0.)); +#373870 = ORIENTED_EDGE('',*,*,#373871,.F.); +#373871 = EDGE_CURVE('',#373872,#373864,#373874,.T.); +#373872 = VERTEX_POINT('',#373873); +#373873 = CARTESIAN_POINT('',(127.67,-65.08,1.51)); +#373874 = LINE('',#373875,#373876); +#373875 = CARTESIAN_POINT('',(127.67,-65.08,1.51)); +#373876 = VECTOR('',#373877,1.); +#373877 = DIRECTION('',(0.,0.,1.)); +#373878 = ORIENTED_EDGE('',*,*,#373879,.F.); +#373879 = EDGE_CURVE('',#373840,#373872,#373880,.T.); +#373880 = LINE('',#373881,#373882); +#373881 = CARTESIAN_POINT('',(127.33,-65.08,1.51)); +#373882 = VECTOR('',#373883,1.); +#373883 = DIRECTION('',(1.,0.,0.)); +#373884 = PLANE('',#373885); +#373885 = AXIS2_PLACEMENT_3D('',#373886,#373887,#373888); +#373886 = CARTESIAN_POINT('',(127.33,-65.08,1.51)); +#373887 = DIRECTION('',(0.,1.,0.)); +#373888 = DIRECTION('',(1.,0.,0.)); +#373889 = ADVANCED_FACE('',(#373890),#373917,.T.); +#373890 = FACE_BOUND('',#373891,.T.); +#373891 = EDGE_LOOP('',(#373892,#373893,#373902,#373910)); +#373892 = ORIENTED_EDGE('',*,*,#373871,.T.); +#373893 = ORIENTED_EDGE('',*,*,#373894,.T.); +#373894 = EDGE_CURVE('',#373864,#373895,#373897,.T.); +#373895 = VERTEX_POINT('',#373896); +#373896 = CARTESIAN_POINT('',(127.81,-65.22,1.55)); +#373897 = CIRCLE('',#373898,0.139999827125); +#373898 = AXIS2_PLACEMENT_3D('',#373899,#373900,#373901); +#373899 = CARTESIAN_POINT('',(127.67000017287,-65.21999982712,1.55)); +#373900 = DIRECTION('',(0.,0.,-1.)); +#373901 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#373902 = ORIENTED_EDGE('',*,*,#373903,.F.); +#373903 = EDGE_CURVE('',#373904,#373895,#373906,.T.); +#373904 = VERTEX_POINT('',#373905); +#373905 = CARTESIAN_POINT('',(127.81,-65.22,1.51)); +#373906 = LINE('',#373907,#373908); +#373907 = CARTESIAN_POINT('',(127.81,-65.22,1.51)); +#373908 = VECTOR('',#373909,1.); +#373909 = DIRECTION('',(0.,0.,1.)); +#373910 = ORIENTED_EDGE('',*,*,#373911,.F.); +#373911 = EDGE_CURVE('',#373872,#373904,#373912,.T.); +#373912 = CIRCLE('',#373913,0.139999827125); +#373913 = AXIS2_PLACEMENT_3D('',#373914,#373915,#373916); +#373914 = CARTESIAN_POINT('',(127.67000017287,-65.21999982712,1.51)); +#373915 = DIRECTION('',(0.,0.,-1.)); +#373916 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#373917 = CYLINDRICAL_SURFACE('',#373918,0.139999827125); +#373918 = AXIS2_PLACEMENT_3D('',#373919,#373920,#373921); +#373919 = CARTESIAN_POINT('',(127.67000017287,-65.21999982712,1.51)); +#373920 = DIRECTION('',(0.,0.,-1.)); +#373921 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#373922 = ADVANCED_FACE('',(#373923),#373948,.T.); +#373923 = FACE_BOUND('',#373924,.T.); +#373924 = EDGE_LOOP('',(#373925,#373926,#373934,#373942)); +#373925 = ORIENTED_EDGE('',*,*,#373903,.T.); +#373926 = ORIENTED_EDGE('',*,*,#373927,.T.); +#373927 = EDGE_CURVE('',#373895,#373928,#373930,.T.); +#373928 = VERTEX_POINT('',#373929); +#373929 = CARTESIAN_POINT('',(127.81,-65.5,1.55)); +#373930 = LINE('',#373931,#373932); +#373931 = CARTESIAN_POINT('',(127.81,-65.22,1.55)); +#373932 = VECTOR('',#373933,1.); +#373933 = DIRECTION('',(0.,-1.,0.)); +#373934 = ORIENTED_EDGE('',*,*,#373935,.F.); +#373935 = EDGE_CURVE('',#373936,#373928,#373938,.T.); +#373936 = VERTEX_POINT('',#373937); +#373937 = CARTESIAN_POINT('',(127.81,-65.5,1.51)); +#373938 = LINE('',#373939,#373940); +#373939 = CARTESIAN_POINT('',(127.81,-65.5,1.51)); +#373940 = VECTOR('',#373941,1.); +#373941 = DIRECTION('',(0.,0.,1.)); +#373942 = ORIENTED_EDGE('',*,*,#373943,.F.); +#373943 = EDGE_CURVE('',#373904,#373936,#373944,.T.); +#373944 = LINE('',#373945,#373946); +#373945 = CARTESIAN_POINT('',(127.81,-65.22,1.51)); +#373946 = VECTOR('',#373947,1.); +#373947 = DIRECTION('',(0.,-1.,0.)); +#373948 = PLANE('',#373949); +#373949 = AXIS2_PLACEMENT_3D('',#373950,#373951,#373952); +#373950 = CARTESIAN_POINT('',(127.81,-65.22,1.51)); +#373951 = DIRECTION('',(1.,0.,-0.)); +#373952 = DIRECTION('',(0.,-1.,0.)); +#373953 = ADVANCED_FACE('',(#373954),#373981,.T.); +#373954 = FACE_BOUND('',#373955,.T.); +#373955 = EDGE_LOOP('',(#373956,#373957,#373966,#373974)); +#373956 = ORIENTED_EDGE('',*,*,#373935,.T.); +#373957 = ORIENTED_EDGE('',*,*,#373958,.T.); +#373958 = EDGE_CURVE('',#373928,#373959,#373961,.T.); +#373959 = VERTEX_POINT('',#373960); +#373960 = CARTESIAN_POINT('',(127.67,-65.64,1.55)); +#373961 = CIRCLE('',#373962,0.139999827125); +#373962 = AXIS2_PLACEMENT_3D('',#373963,#373964,#373965); +#373963 = CARTESIAN_POINT('',(127.67000017287,-65.50000017287,1.55)); +#373964 = DIRECTION('',(0.,0.,-1.)); +#373965 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#373966 = ORIENTED_EDGE('',*,*,#373967,.F.); +#373967 = EDGE_CURVE('',#373968,#373959,#373970,.T.); +#373968 = VERTEX_POINT('',#373969); +#373969 = CARTESIAN_POINT('',(127.67,-65.64,1.51)); +#373970 = LINE('',#373971,#373972); +#373971 = CARTESIAN_POINT('',(127.67,-65.64,1.51)); +#373972 = VECTOR('',#373973,1.); +#373973 = DIRECTION('',(0.,0.,1.)); +#373974 = ORIENTED_EDGE('',*,*,#373975,.F.); +#373975 = EDGE_CURVE('',#373936,#373968,#373976,.T.); +#373976 = CIRCLE('',#373977,0.139999827125); +#373977 = AXIS2_PLACEMENT_3D('',#373978,#373979,#373980); +#373978 = CARTESIAN_POINT('',(127.67000017287,-65.50000017287,1.51)); +#373979 = DIRECTION('',(0.,0.,-1.)); +#373980 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#373981 = CYLINDRICAL_SURFACE('',#373982,0.139999827125); +#373982 = AXIS2_PLACEMENT_3D('',#373983,#373984,#373985); +#373983 = CARTESIAN_POINT('',(127.67000017287,-65.50000017287,1.51)); +#373984 = DIRECTION('',(0.,0.,-1.)); +#373985 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#373986 = ADVANCED_FACE('',(#373987),#374012,.T.); +#373987 = FACE_BOUND('',#373988,.T.); +#373988 = EDGE_LOOP('',(#373989,#373990,#373998,#374006)); +#373989 = ORIENTED_EDGE('',*,*,#373967,.T.); +#373990 = ORIENTED_EDGE('',*,*,#373991,.T.); +#373991 = EDGE_CURVE('',#373959,#373992,#373994,.T.); +#373992 = VERTEX_POINT('',#373993); +#373993 = CARTESIAN_POINT('',(127.33,-65.64,1.55)); +#373994 = LINE('',#373995,#373996); +#373995 = CARTESIAN_POINT('',(127.67,-65.64,1.55)); +#373996 = VECTOR('',#373997,1.); +#373997 = DIRECTION('',(-1.,0.,0.)); +#373998 = ORIENTED_EDGE('',*,*,#373999,.F.); +#373999 = EDGE_CURVE('',#374000,#373992,#374002,.T.); +#374000 = VERTEX_POINT('',#374001); +#374001 = CARTESIAN_POINT('',(127.33,-65.64,1.51)); +#374002 = LINE('',#374003,#374004); +#374003 = CARTESIAN_POINT('',(127.33,-65.64,1.51)); +#374004 = VECTOR('',#374005,1.); +#374005 = DIRECTION('',(0.,0.,1.)); +#374006 = ORIENTED_EDGE('',*,*,#374007,.F.); +#374007 = EDGE_CURVE('',#373968,#374000,#374008,.T.); +#374008 = LINE('',#374009,#374010); +#374009 = CARTESIAN_POINT('',(127.67,-65.64,1.51)); +#374010 = VECTOR('',#374011,1.); +#374011 = DIRECTION('',(-1.,0.,0.)); +#374012 = PLANE('',#374013); +#374013 = AXIS2_PLACEMENT_3D('',#374014,#374015,#374016); +#374014 = CARTESIAN_POINT('',(127.67,-65.64,1.51)); +#374015 = DIRECTION('',(0.,-1.,0.)); +#374016 = DIRECTION('',(-1.,0.,0.)); +#374017 = ADVANCED_FACE('',(#374018),#374045,.T.); +#374018 = FACE_BOUND('',#374019,.T.); +#374019 = EDGE_LOOP('',(#374020,#374021,#374030,#374038)); +#374020 = ORIENTED_EDGE('',*,*,#373999,.T.); +#374021 = ORIENTED_EDGE('',*,*,#374022,.T.); +#374022 = EDGE_CURVE('',#373992,#374023,#374025,.T.); +#374023 = VERTEX_POINT('',#374024); +#374024 = CARTESIAN_POINT('',(127.19,-65.5,1.55)); +#374025 = CIRCLE('',#374026,0.139999827125); +#374026 = AXIS2_PLACEMENT_3D('',#374027,#374028,#374029); +#374027 = CARTESIAN_POINT('',(127.32999982712,-65.50000017287,1.55)); +#374028 = DIRECTION('',(0.,0.,-1.)); +#374029 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#374030 = ORIENTED_EDGE('',*,*,#374031,.F.); +#374031 = EDGE_CURVE('',#374032,#374023,#374034,.T.); +#374032 = VERTEX_POINT('',#374033); +#374033 = CARTESIAN_POINT('',(127.19,-65.5,1.51)); +#374034 = LINE('',#374035,#374036); +#374035 = CARTESIAN_POINT('',(127.19,-65.5,1.51)); +#374036 = VECTOR('',#374037,1.); +#374037 = DIRECTION('',(0.,0.,1.)); +#374038 = ORIENTED_EDGE('',*,*,#374039,.F.); +#374039 = EDGE_CURVE('',#374000,#374032,#374040,.T.); +#374040 = CIRCLE('',#374041,0.139999827125); +#374041 = AXIS2_PLACEMENT_3D('',#374042,#374043,#374044); +#374042 = CARTESIAN_POINT('',(127.32999982712,-65.50000017287,1.51)); +#374043 = DIRECTION('',(0.,0.,-1.)); +#374044 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#374045 = CYLINDRICAL_SURFACE('',#374046,0.139999827125); +#374046 = AXIS2_PLACEMENT_3D('',#374047,#374048,#374049); +#374047 = CARTESIAN_POINT('',(127.32999982712,-65.50000017287,1.51)); +#374048 = DIRECTION('',(0.,0.,-1.)); +#374049 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#374050 = ADVANCED_FACE('',(#374051),#374067,.T.); +#374051 = FACE_BOUND('',#374052,.T.); +#374052 = EDGE_LOOP('',(#374053,#374054,#374060,#374061)); +#374053 = ORIENTED_EDGE('',*,*,#374031,.T.); +#374054 = ORIENTED_EDGE('',*,*,#374055,.T.); +#374055 = EDGE_CURVE('',#374023,#373823,#374056,.T.); +#374056 = LINE('',#374057,#374058); +#374057 = CARTESIAN_POINT('',(127.19,-65.5,1.55)); +#374058 = VECTOR('',#374059,1.); +#374059 = DIRECTION('',(0.,1.,0.)); +#374060 = ORIENTED_EDGE('',*,*,#373820,.F.); +#374061 = ORIENTED_EDGE('',*,*,#374062,.F.); +#374062 = EDGE_CURVE('',#374032,#373821,#374063,.T.); +#374063 = LINE('',#374064,#374065); +#374064 = CARTESIAN_POINT('',(127.19,-65.5,1.51)); +#374065 = VECTOR('',#374066,1.); +#374066 = DIRECTION('',(0.,1.,0.)); +#374067 = PLANE('',#374068); +#374068 = AXIS2_PLACEMENT_3D('',#374069,#374070,#374071); +#374069 = CARTESIAN_POINT('',(127.19,-65.5,1.51)); +#374070 = DIRECTION('',(-1.,0.,0.)); +#374071 = DIRECTION('',(0.,1.,0.)); +#374072 = ADVANCED_FACE('',(#374073),#374083,.F.); +#374073 = FACE_BOUND('',#374074,.T.); +#374074 = EDGE_LOOP('',(#374075,#374076,#374077,#374078,#374079,#374080, + #374081,#374082)); +#374075 = ORIENTED_EDGE('',*,*,#373847,.T.); +#374076 = ORIENTED_EDGE('',*,*,#373879,.T.); +#374077 = ORIENTED_EDGE('',*,*,#373911,.T.); +#374078 = ORIENTED_EDGE('',*,*,#373943,.T.); +#374079 = ORIENTED_EDGE('',*,*,#373975,.T.); +#374080 = ORIENTED_EDGE('',*,*,#374007,.T.); +#374081 = ORIENTED_EDGE('',*,*,#374039,.T.); +#374082 = ORIENTED_EDGE('',*,*,#374062,.T.); +#374083 = PLANE('',#374084); +#374084 = AXIS2_PLACEMENT_3D('',#374085,#374086,#374087); +#374085 = CARTESIAN_POINT('',(0.,0.,1.51)); +#374086 = DIRECTION('',(0.,0.,1.)); +#374087 = DIRECTION('',(1.,0.,-0.)); +#374088 = ADVANCED_FACE('',(#374089),#374099,.T.); +#374089 = FACE_BOUND('',#374090,.F.); +#374090 = EDGE_LOOP('',(#374091,#374092,#374093,#374094,#374095,#374096, + #374097,#374098)); +#374091 = ORIENTED_EDGE('',*,*,#373830,.T.); +#374092 = ORIENTED_EDGE('',*,*,#373863,.T.); +#374093 = ORIENTED_EDGE('',*,*,#373894,.T.); +#374094 = ORIENTED_EDGE('',*,*,#373927,.T.); +#374095 = ORIENTED_EDGE('',*,*,#373958,.T.); +#374096 = ORIENTED_EDGE('',*,*,#373991,.T.); +#374097 = ORIENTED_EDGE('',*,*,#374022,.T.); +#374098 = ORIENTED_EDGE('',*,*,#374055,.T.); +#374099 = PLANE('',#374100); +#374100 = AXIS2_PLACEMENT_3D('',#374101,#374102,#374103); +#374101 = CARTESIAN_POINT('',(0.,0.,1.55)); +#374102 = DIRECTION('',(0.,0.,1.)); +#374103 = DIRECTION('',(1.,0.,-0.)); +#374104 = MANIFOLD_SOLID_BREP('',#374105); +#374105 = CLOSED_SHELL('',(#374106,#374148,#374179,#374212,#374243, + #374276,#374307,#374340,#374362,#374378)); +#374106 = ADVANCED_FACE('',(#374107),#374143,.T.); +#374107 = FACE_BOUND('',#374108,.T.); +#374108 = EDGE_LOOP('',(#374109,#374119,#374128,#374136)); +#374109 = ORIENTED_EDGE('',*,*,#374110,.T.); +#374110 = EDGE_CURVE('',#374111,#374113,#374115,.T.); +#374111 = VERTEX_POINT('',#374112); +#374112 = CARTESIAN_POINT('',(125.7,-64.45,1.51)); +#374113 = VERTEX_POINT('',#374114); +#374114 = CARTESIAN_POINT('',(125.7,-64.45,1.55)); +#374115 = LINE('',#374116,#374117); +#374116 = CARTESIAN_POINT('',(125.7,-64.45,1.51)); +#374117 = VECTOR('',#374118,1.); +#374118 = DIRECTION('',(0.,0.,1.)); +#374119 = ORIENTED_EDGE('',*,*,#374120,.T.); +#374120 = EDGE_CURVE('',#374113,#374121,#374123,.T.); +#374121 = VERTEX_POINT('',#374122); +#374122 = CARTESIAN_POINT('',(125.925,-64.225,1.55)); +#374123 = CIRCLE('',#374124,0.225000087974); +#374124 = AXIS2_PLACEMENT_3D('',#374125,#374126,#374127); +#374125 = CARTESIAN_POINT('',(125.92500008797,-64.45000008797,1.55)); +#374126 = DIRECTION('',(0.,0.,-1.)); +#374127 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#374128 = ORIENTED_EDGE('',*,*,#374129,.F.); +#374129 = EDGE_CURVE('',#374130,#374121,#374132,.T.); +#374130 = VERTEX_POINT('',#374131); +#374131 = CARTESIAN_POINT('',(125.925,-64.225,1.51)); +#374132 = LINE('',#374133,#374134); +#374133 = CARTESIAN_POINT('',(125.925,-64.225,1.51)); +#374134 = VECTOR('',#374135,1.); +#374135 = DIRECTION('',(0.,0.,1.)); +#374136 = ORIENTED_EDGE('',*,*,#374137,.F.); +#374137 = EDGE_CURVE('',#374111,#374130,#374138,.T.); +#374138 = CIRCLE('',#374139,0.225000087974); +#374139 = AXIS2_PLACEMENT_3D('',#374140,#374141,#374142); +#374140 = CARTESIAN_POINT('',(125.92500008797,-64.45000008797,1.51)); +#374141 = DIRECTION('',(0.,0.,-1.)); +#374142 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#374143 = CYLINDRICAL_SURFACE('',#374144,0.225000087974); +#374144 = AXIS2_PLACEMENT_3D('',#374145,#374146,#374147); +#374145 = CARTESIAN_POINT('',(125.92500008797,-64.45000008797,1.51)); +#374146 = DIRECTION('',(0.,0.,-1.)); +#374147 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#374148 = ADVANCED_FACE('',(#374149),#374174,.T.); +#374149 = FACE_BOUND('',#374150,.T.); +#374150 = EDGE_LOOP('',(#374151,#374152,#374160,#374168)); +#374151 = ORIENTED_EDGE('',*,*,#374129,.T.); +#374152 = ORIENTED_EDGE('',*,*,#374153,.T.); +#374153 = EDGE_CURVE('',#374121,#374154,#374156,.T.); +#374154 = VERTEX_POINT('',#374155); +#374155 = CARTESIAN_POINT('',(126.375,-64.225,1.55)); +#374156 = LINE('',#374157,#374158); +#374157 = CARTESIAN_POINT('',(125.925,-64.225,1.55)); +#374158 = VECTOR('',#374159,1.); +#374159 = DIRECTION('',(1.,0.,0.)); +#374160 = ORIENTED_EDGE('',*,*,#374161,.F.); +#374161 = EDGE_CURVE('',#374162,#374154,#374164,.T.); +#374162 = VERTEX_POINT('',#374163); +#374163 = CARTESIAN_POINT('',(126.375,-64.225,1.51)); +#374164 = LINE('',#374165,#374166); +#374165 = CARTESIAN_POINT('',(126.375,-64.225,1.51)); +#374166 = VECTOR('',#374167,1.); +#374167 = DIRECTION('',(0.,0.,1.)); +#374168 = ORIENTED_EDGE('',*,*,#374169,.F.); +#374169 = EDGE_CURVE('',#374130,#374162,#374170,.T.); +#374170 = LINE('',#374171,#374172); +#374171 = CARTESIAN_POINT('',(125.925,-64.225,1.51)); +#374172 = VECTOR('',#374173,1.); +#374173 = DIRECTION('',(1.,0.,0.)); +#374174 = PLANE('',#374175); +#374175 = AXIS2_PLACEMENT_3D('',#374176,#374177,#374178); +#374176 = CARTESIAN_POINT('',(125.925,-64.225,1.51)); +#374177 = DIRECTION('',(0.,1.,0.)); +#374178 = DIRECTION('',(1.,0.,0.)); +#374179 = ADVANCED_FACE('',(#374180),#374207,.T.); +#374180 = FACE_BOUND('',#374181,.T.); +#374181 = EDGE_LOOP('',(#374182,#374183,#374192,#374200)); +#374182 = ORIENTED_EDGE('',*,*,#374161,.T.); +#374183 = ORIENTED_EDGE('',*,*,#374184,.T.); +#374184 = EDGE_CURVE('',#374154,#374185,#374187,.T.); +#374185 = VERTEX_POINT('',#374186); +#374186 = CARTESIAN_POINT('',(126.6,-64.45,1.55)); +#374187 = CIRCLE('',#374188,0.225000087974); +#374188 = AXIS2_PLACEMENT_3D('',#374189,#374190,#374191); +#374189 = CARTESIAN_POINT('',(126.37499991202,-64.45000008797,1.55)); +#374190 = DIRECTION('',(0.,0.,-1.)); +#374191 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#374192 = ORIENTED_EDGE('',*,*,#374193,.F.); +#374193 = EDGE_CURVE('',#374194,#374185,#374196,.T.); +#374194 = VERTEX_POINT('',#374195); +#374195 = CARTESIAN_POINT('',(126.6,-64.45,1.51)); +#374196 = LINE('',#374197,#374198); +#374197 = CARTESIAN_POINT('',(126.6,-64.45,1.51)); +#374198 = VECTOR('',#374199,1.); +#374199 = DIRECTION('',(0.,0.,1.)); +#374200 = ORIENTED_EDGE('',*,*,#374201,.F.); +#374201 = EDGE_CURVE('',#374162,#374194,#374202,.T.); +#374202 = CIRCLE('',#374203,0.225000087974); +#374203 = AXIS2_PLACEMENT_3D('',#374204,#374205,#374206); +#374204 = CARTESIAN_POINT('',(126.37499991202,-64.45000008797,1.51)); +#374205 = DIRECTION('',(0.,0.,-1.)); +#374206 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#374207 = CYLINDRICAL_SURFACE('',#374208,0.225000087974); +#374208 = AXIS2_PLACEMENT_3D('',#374209,#374210,#374211); +#374209 = CARTESIAN_POINT('',(126.37499991202,-64.45000008797,1.51)); +#374210 = DIRECTION('',(0.,0.,-1.)); +#374211 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#374212 = ADVANCED_FACE('',(#374213),#374238,.T.); +#374213 = FACE_BOUND('',#374214,.T.); +#374214 = EDGE_LOOP('',(#374215,#374216,#374224,#374232)); +#374215 = ORIENTED_EDGE('',*,*,#374193,.T.); +#374216 = ORIENTED_EDGE('',*,*,#374217,.T.); +#374217 = EDGE_CURVE('',#374185,#374218,#374220,.T.); +#374218 = VERTEX_POINT('',#374219); +#374219 = CARTESIAN_POINT('',(126.6,-64.95,1.55)); +#374220 = LINE('',#374221,#374222); +#374221 = CARTESIAN_POINT('',(126.6,-64.45,1.55)); +#374222 = VECTOR('',#374223,1.); +#374223 = DIRECTION('',(0.,-1.,0.)); +#374224 = ORIENTED_EDGE('',*,*,#374225,.F.); +#374225 = EDGE_CURVE('',#374226,#374218,#374228,.T.); +#374226 = VERTEX_POINT('',#374227); +#374227 = CARTESIAN_POINT('',(126.6,-64.95,1.51)); +#374228 = LINE('',#374229,#374230); +#374229 = CARTESIAN_POINT('',(126.6,-64.95,1.51)); +#374230 = VECTOR('',#374231,1.); +#374231 = DIRECTION('',(0.,0.,1.)); +#374232 = ORIENTED_EDGE('',*,*,#374233,.F.); +#374233 = EDGE_CURVE('',#374194,#374226,#374234,.T.); +#374234 = LINE('',#374235,#374236); +#374235 = CARTESIAN_POINT('',(126.6,-64.45,1.51)); +#374236 = VECTOR('',#374237,1.); +#374237 = DIRECTION('',(0.,-1.,0.)); +#374238 = PLANE('',#374239); +#374239 = AXIS2_PLACEMENT_3D('',#374240,#374241,#374242); +#374240 = CARTESIAN_POINT('',(126.6,-64.45,1.51)); +#374241 = DIRECTION('',(1.,0.,-0.)); +#374242 = DIRECTION('',(0.,-1.,0.)); +#374243 = ADVANCED_FACE('',(#374244),#374271,.T.); +#374244 = FACE_BOUND('',#374245,.T.); +#374245 = EDGE_LOOP('',(#374246,#374247,#374256,#374264)); +#374246 = ORIENTED_EDGE('',*,*,#374225,.T.); +#374247 = ORIENTED_EDGE('',*,*,#374248,.T.); +#374248 = EDGE_CURVE('',#374218,#374249,#374251,.T.); +#374249 = VERTEX_POINT('',#374250); +#374250 = CARTESIAN_POINT('',(126.375,-65.175,1.55)); +#374251 = CIRCLE('',#374252,0.225000087974); +#374252 = AXIS2_PLACEMENT_3D('',#374253,#374254,#374255); +#374253 = CARTESIAN_POINT('',(126.37499991202,-64.94999991202,1.55)); +#374254 = DIRECTION('',(0.,0.,-1.)); +#374255 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#374256 = ORIENTED_EDGE('',*,*,#374257,.F.); +#374257 = EDGE_CURVE('',#374258,#374249,#374260,.T.); +#374258 = VERTEX_POINT('',#374259); +#374259 = CARTESIAN_POINT('',(126.375,-65.175,1.51)); +#374260 = LINE('',#374261,#374262); +#374261 = CARTESIAN_POINT('',(126.375,-65.175,1.51)); +#374262 = VECTOR('',#374263,1.); +#374263 = DIRECTION('',(0.,0.,1.)); +#374264 = ORIENTED_EDGE('',*,*,#374265,.F.); +#374265 = EDGE_CURVE('',#374226,#374258,#374266,.T.); +#374266 = CIRCLE('',#374267,0.225000087974); +#374267 = AXIS2_PLACEMENT_3D('',#374268,#374269,#374270); +#374268 = CARTESIAN_POINT('',(126.37499991202,-64.94999991202,1.51)); +#374269 = DIRECTION('',(0.,0.,-1.)); +#374270 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#374271 = CYLINDRICAL_SURFACE('',#374272,0.225000087974); +#374272 = AXIS2_PLACEMENT_3D('',#374273,#374274,#374275); +#374273 = CARTESIAN_POINT('',(126.37499991202,-64.94999991202,1.51)); +#374274 = DIRECTION('',(0.,0.,-1.)); +#374275 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#374276 = ADVANCED_FACE('',(#374277),#374302,.T.); +#374277 = FACE_BOUND('',#374278,.T.); +#374278 = EDGE_LOOP('',(#374279,#374280,#374288,#374296)); +#374279 = ORIENTED_EDGE('',*,*,#374257,.T.); +#374280 = ORIENTED_EDGE('',*,*,#374281,.T.); +#374281 = EDGE_CURVE('',#374249,#374282,#374284,.T.); +#374282 = VERTEX_POINT('',#374283); +#374283 = CARTESIAN_POINT('',(125.925,-65.175,1.55)); +#374284 = LINE('',#374285,#374286); +#374285 = CARTESIAN_POINT('',(126.375,-65.175,1.55)); +#374286 = VECTOR('',#374287,1.); +#374287 = DIRECTION('',(-1.,0.,0.)); +#374288 = ORIENTED_EDGE('',*,*,#374289,.F.); +#374289 = EDGE_CURVE('',#374290,#374282,#374292,.T.); +#374290 = VERTEX_POINT('',#374291); +#374291 = CARTESIAN_POINT('',(125.925,-65.175,1.51)); +#374292 = LINE('',#374293,#374294); +#374293 = CARTESIAN_POINT('',(125.925,-65.175,1.51)); +#374294 = VECTOR('',#374295,1.); +#374295 = DIRECTION('',(0.,0.,1.)); +#374296 = ORIENTED_EDGE('',*,*,#374297,.F.); +#374297 = EDGE_CURVE('',#374258,#374290,#374298,.T.); +#374298 = LINE('',#374299,#374300); +#374299 = CARTESIAN_POINT('',(126.375,-65.175,1.51)); +#374300 = VECTOR('',#374301,1.); +#374301 = DIRECTION('',(-1.,0.,0.)); +#374302 = PLANE('',#374303); +#374303 = AXIS2_PLACEMENT_3D('',#374304,#374305,#374306); +#374304 = CARTESIAN_POINT('',(126.375,-65.175,1.51)); +#374305 = DIRECTION('',(0.,-1.,0.)); +#374306 = DIRECTION('',(-1.,0.,0.)); +#374307 = ADVANCED_FACE('',(#374308),#374335,.T.); +#374308 = FACE_BOUND('',#374309,.T.); +#374309 = EDGE_LOOP('',(#374310,#374311,#374320,#374328)); +#374310 = ORIENTED_EDGE('',*,*,#374289,.T.); +#374311 = ORIENTED_EDGE('',*,*,#374312,.T.); +#374312 = EDGE_CURVE('',#374282,#374313,#374315,.T.); +#374313 = VERTEX_POINT('',#374314); +#374314 = CARTESIAN_POINT('',(125.7,-64.95,1.55)); +#374315 = CIRCLE('',#374316,0.225000087974); +#374316 = AXIS2_PLACEMENT_3D('',#374317,#374318,#374319); +#374317 = CARTESIAN_POINT('',(125.92500008797,-64.94999991202,1.55)); +#374318 = DIRECTION('',(0.,0.,-1.)); +#374319 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#374320 = ORIENTED_EDGE('',*,*,#374321,.F.); +#374321 = EDGE_CURVE('',#374322,#374313,#374324,.T.); +#374322 = VERTEX_POINT('',#374323); +#374323 = CARTESIAN_POINT('',(125.7,-64.95,1.51)); +#374324 = LINE('',#374325,#374326); +#374325 = CARTESIAN_POINT('',(125.7,-64.95,1.51)); +#374326 = VECTOR('',#374327,1.); +#374327 = DIRECTION('',(0.,0.,1.)); +#374328 = ORIENTED_EDGE('',*,*,#374329,.F.); +#374329 = EDGE_CURVE('',#374290,#374322,#374330,.T.); +#374330 = CIRCLE('',#374331,0.225000087974); +#374331 = AXIS2_PLACEMENT_3D('',#374332,#374333,#374334); +#374332 = CARTESIAN_POINT('',(125.92500008797,-64.94999991202,1.51)); +#374333 = DIRECTION('',(0.,0.,-1.)); +#374334 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#374335 = CYLINDRICAL_SURFACE('',#374336,0.225000087974); +#374336 = AXIS2_PLACEMENT_3D('',#374337,#374338,#374339); +#374337 = CARTESIAN_POINT('',(125.92500008797,-64.94999991202,1.51)); +#374338 = DIRECTION('',(0.,0.,-1.)); +#374339 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#374340 = ADVANCED_FACE('',(#374341),#374357,.T.); +#374341 = FACE_BOUND('',#374342,.T.); +#374342 = EDGE_LOOP('',(#374343,#374344,#374350,#374351)); +#374343 = ORIENTED_EDGE('',*,*,#374321,.T.); +#374344 = ORIENTED_EDGE('',*,*,#374345,.T.); +#374345 = EDGE_CURVE('',#374313,#374113,#374346,.T.); +#374346 = LINE('',#374347,#374348); +#374347 = CARTESIAN_POINT('',(125.7,-64.95,1.55)); +#374348 = VECTOR('',#374349,1.); +#374349 = DIRECTION('',(0.,1.,0.)); +#374350 = ORIENTED_EDGE('',*,*,#374110,.F.); +#374351 = ORIENTED_EDGE('',*,*,#374352,.F.); +#374352 = EDGE_CURVE('',#374322,#374111,#374353,.T.); +#374353 = LINE('',#374354,#374355); +#374354 = CARTESIAN_POINT('',(125.7,-64.95,1.51)); +#374355 = VECTOR('',#374356,1.); +#374356 = DIRECTION('',(0.,1.,0.)); +#374357 = PLANE('',#374358); +#374358 = AXIS2_PLACEMENT_3D('',#374359,#374360,#374361); +#374359 = CARTESIAN_POINT('',(125.7,-64.95,1.51)); +#374360 = DIRECTION('',(-1.,0.,0.)); +#374361 = DIRECTION('',(0.,1.,0.)); +#374362 = ADVANCED_FACE('',(#374363),#374373,.F.); +#374363 = FACE_BOUND('',#374364,.T.); +#374364 = EDGE_LOOP('',(#374365,#374366,#374367,#374368,#374369,#374370, + #374371,#374372)); +#374365 = ORIENTED_EDGE('',*,*,#374137,.T.); +#374366 = ORIENTED_EDGE('',*,*,#374169,.T.); +#374367 = ORIENTED_EDGE('',*,*,#374201,.T.); +#374368 = ORIENTED_EDGE('',*,*,#374233,.T.); +#374369 = ORIENTED_EDGE('',*,*,#374265,.T.); +#374370 = ORIENTED_EDGE('',*,*,#374297,.T.); +#374371 = ORIENTED_EDGE('',*,*,#374329,.T.); +#374372 = ORIENTED_EDGE('',*,*,#374352,.T.); +#374373 = PLANE('',#374374); +#374374 = AXIS2_PLACEMENT_3D('',#374375,#374376,#374377); +#374375 = CARTESIAN_POINT('',(0.,0.,1.51)); +#374376 = DIRECTION('',(0.,0.,1.)); +#374377 = DIRECTION('',(1.,0.,-0.)); +#374378 = ADVANCED_FACE('',(#374379),#374389,.T.); +#374379 = FACE_BOUND('',#374380,.F.); +#374380 = EDGE_LOOP('',(#374381,#374382,#374383,#374384,#374385,#374386, + #374387,#374388)); +#374381 = ORIENTED_EDGE('',*,*,#374120,.T.); +#374382 = ORIENTED_EDGE('',*,*,#374153,.T.); +#374383 = ORIENTED_EDGE('',*,*,#374184,.T.); +#374384 = ORIENTED_EDGE('',*,*,#374217,.T.); +#374385 = ORIENTED_EDGE('',*,*,#374248,.T.); +#374386 = ORIENTED_EDGE('',*,*,#374281,.T.); +#374387 = ORIENTED_EDGE('',*,*,#374312,.T.); +#374388 = ORIENTED_EDGE('',*,*,#374345,.T.); +#374389 = PLANE('',#374390); +#374390 = AXIS2_PLACEMENT_3D('',#374391,#374392,#374393); +#374391 = CARTESIAN_POINT('',(0.,0.,1.55)); +#374392 = DIRECTION('',(0.,0.,1.)); +#374393 = DIRECTION('',(1.,0.,-0.)); +#374394 = MANIFOLD_SOLID_BREP('',#374395); +#374395 = CLOSED_SHELL('',(#374396,#374438,#374469,#374502,#374533, + #374566,#374597,#374630,#374652,#374668)); +#374396 = ADVANCED_FACE('',(#374397),#374433,.T.); +#374397 = FACE_BOUND('',#374398,.T.); +#374398 = EDGE_LOOP('',(#374399,#374409,#374418,#374426)); +#374399 = ORIENTED_EDGE('',*,*,#374400,.T.); +#374400 = EDGE_CURVE('',#374401,#374403,#374405,.T.); +#374401 = VERTEX_POINT('',#374402); +#374402 = CARTESIAN_POINT('',(141.94,-128.88,1.51)); +#374403 = VERTEX_POINT('',#374404); +#374404 = CARTESIAN_POINT('',(141.94,-128.88,1.55)); +#374405 = LINE('',#374406,#374407); +#374406 = CARTESIAN_POINT('',(141.94,-128.88,1.51)); +#374407 = VECTOR('',#374408,1.); +#374408 = DIRECTION('',(0.,0.,1.)); +#374409 = ORIENTED_EDGE('',*,*,#374410,.T.); +#374410 = EDGE_CURVE('',#374403,#374411,#374413,.T.); +#374411 = VERTEX_POINT('',#374412); +#374412 = CARTESIAN_POINT('',(142.08,-128.74,1.55)); +#374413 = CIRCLE('',#374414,0.139999827125); +#374414 = AXIS2_PLACEMENT_3D('',#374415,#374416,#374417); +#374415 = CARTESIAN_POINT('',(142.07999982712,-128.8799998271,1.55)); +#374416 = DIRECTION('',(0.,0.,-1.)); +#374417 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#374418 = ORIENTED_EDGE('',*,*,#374419,.F.); +#374419 = EDGE_CURVE('',#374420,#374411,#374422,.T.); +#374420 = VERTEX_POINT('',#374421); +#374421 = CARTESIAN_POINT('',(142.08,-128.74,1.51)); +#374422 = LINE('',#374423,#374424); +#374423 = CARTESIAN_POINT('',(142.08,-128.74,1.51)); +#374424 = VECTOR('',#374425,1.); +#374425 = DIRECTION('',(0.,0.,1.)); +#374426 = ORIENTED_EDGE('',*,*,#374427,.F.); +#374427 = EDGE_CURVE('',#374401,#374420,#374428,.T.); +#374428 = CIRCLE('',#374429,0.139999827125); +#374429 = AXIS2_PLACEMENT_3D('',#374430,#374431,#374432); +#374430 = CARTESIAN_POINT('',(142.07999982712,-128.8799998271,1.51)); +#374431 = DIRECTION('',(0.,0.,-1.)); +#374432 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#374433 = CYLINDRICAL_SURFACE('',#374434,0.139999827125); +#374434 = AXIS2_PLACEMENT_3D('',#374435,#374436,#374437); +#374435 = CARTESIAN_POINT('',(142.07999982712,-128.8799998271,1.51)); +#374436 = DIRECTION('',(0.,0.,-1.)); +#374437 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#374438 = ADVANCED_FACE('',(#374439),#374464,.T.); +#374439 = FACE_BOUND('',#374440,.T.); +#374440 = EDGE_LOOP('',(#374441,#374442,#374450,#374458)); +#374441 = ORIENTED_EDGE('',*,*,#374419,.T.); +#374442 = ORIENTED_EDGE('',*,*,#374443,.T.); +#374443 = EDGE_CURVE('',#374411,#374444,#374446,.T.); +#374444 = VERTEX_POINT('',#374445); +#374445 = CARTESIAN_POINT('',(142.42,-128.74,1.55)); +#374446 = LINE('',#374447,#374448); +#374447 = CARTESIAN_POINT('',(142.08,-128.74,1.55)); +#374448 = VECTOR('',#374449,1.); +#374449 = DIRECTION('',(1.,0.,0.)); +#374450 = ORIENTED_EDGE('',*,*,#374451,.F.); +#374451 = EDGE_CURVE('',#374452,#374444,#374454,.T.); +#374452 = VERTEX_POINT('',#374453); +#374453 = CARTESIAN_POINT('',(142.42,-128.74,1.51)); +#374454 = LINE('',#374455,#374456); +#374455 = CARTESIAN_POINT('',(142.42,-128.74,1.51)); +#374456 = VECTOR('',#374457,1.); +#374457 = DIRECTION('',(0.,0.,1.)); +#374458 = ORIENTED_EDGE('',*,*,#374459,.F.); +#374459 = EDGE_CURVE('',#374420,#374452,#374460,.T.); +#374460 = LINE('',#374461,#374462); +#374461 = CARTESIAN_POINT('',(142.08,-128.74,1.51)); +#374462 = VECTOR('',#374463,1.); +#374463 = DIRECTION('',(1.,0.,0.)); +#374464 = PLANE('',#374465); +#374465 = AXIS2_PLACEMENT_3D('',#374466,#374467,#374468); +#374466 = CARTESIAN_POINT('',(142.08,-128.74,1.51)); +#374467 = DIRECTION('',(0.,1.,0.)); +#374468 = DIRECTION('',(1.,0.,0.)); +#374469 = ADVANCED_FACE('',(#374470),#374497,.T.); +#374470 = FACE_BOUND('',#374471,.T.); +#374471 = EDGE_LOOP('',(#374472,#374473,#374482,#374490)); +#374472 = ORIENTED_EDGE('',*,*,#374451,.T.); +#374473 = ORIENTED_EDGE('',*,*,#374474,.T.); +#374474 = EDGE_CURVE('',#374444,#374475,#374477,.T.); +#374475 = VERTEX_POINT('',#374476); +#374476 = CARTESIAN_POINT('',(142.56,-128.88,1.55)); +#374477 = CIRCLE('',#374478,0.139999827125); +#374478 = AXIS2_PLACEMENT_3D('',#374479,#374480,#374481); +#374479 = CARTESIAN_POINT('',(142.42000017287,-128.8799998271,1.55)); +#374480 = DIRECTION('',(0.,0.,-1.)); +#374481 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#374482 = ORIENTED_EDGE('',*,*,#374483,.F.); +#374483 = EDGE_CURVE('',#374484,#374475,#374486,.T.); +#374484 = VERTEX_POINT('',#374485); +#374485 = CARTESIAN_POINT('',(142.56,-128.88,1.51)); +#374486 = LINE('',#374487,#374488); +#374487 = CARTESIAN_POINT('',(142.56,-128.88,1.51)); +#374488 = VECTOR('',#374489,1.); +#374489 = DIRECTION('',(0.,0.,1.)); +#374490 = ORIENTED_EDGE('',*,*,#374491,.F.); +#374491 = EDGE_CURVE('',#374452,#374484,#374492,.T.); +#374492 = CIRCLE('',#374493,0.139999827125); +#374493 = AXIS2_PLACEMENT_3D('',#374494,#374495,#374496); +#374494 = CARTESIAN_POINT('',(142.42000017287,-128.8799998271,1.51)); +#374495 = DIRECTION('',(0.,0.,-1.)); +#374496 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#374497 = CYLINDRICAL_SURFACE('',#374498,0.139999827125); +#374498 = AXIS2_PLACEMENT_3D('',#374499,#374500,#374501); +#374499 = CARTESIAN_POINT('',(142.42000017287,-128.8799998271,1.51)); +#374500 = DIRECTION('',(0.,0.,-1.)); +#374501 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#374502 = ADVANCED_FACE('',(#374503),#374528,.T.); +#374503 = FACE_BOUND('',#374504,.T.); +#374504 = EDGE_LOOP('',(#374505,#374506,#374514,#374522)); +#374505 = ORIENTED_EDGE('',*,*,#374483,.T.); +#374506 = ORIENTED_EDGE('',*,*,#374507,.T.); +#374507 = EDGE_CURVE('',#374475,#374508,#374510,.T.); +#374508 = VERTEX_POINT('',#374509); +#374509 = CARTESIAN_POINT('',(142.56,-129.16,1.55)); +#374510 = LINE('',#374511,#374512); +#374511 = CARTESIAN_POINT('',(142.56,-128.88,1.55)); +#374512 = VECTOR('',#374513,1.); +#374513 = DIRECTION('',(0.,-1.,0.)); +#374514 = ORIENTED_EDGE('',*,*,#374515,.F.); +#374515 = EDGE_CURVE('',#374516,#374508,#374518,.T.); +#374516 = VERTEX_POINT('',#374517); +#374517 = CARTESIAN_POINT('',(142.56,-129.16,1.51)); +#374518 = LINE('',#374519,#374520); +#374519 = CARTESIAN_POINT('',(142.56,-129.16,1.51)); +#374520 = VECTOR('',#374521,1.); +#374521 = DIRECTION('',(0.,0.,1.)); +#374522 = ORIENTED_EDGE('',*,*,#374523,.F.); +#374523 = EDGE_CURVE('',#374484,#374516,#374524,.T.); +#374524 = LINE('',#374525,#374526); +#374525 = CARTESIAN_POINT('',(142.56,-128.88,1.51)); +#374526 = VECTOR('',#374527,1.); +#374527 = DIRECTION('',(0.,-1.,0.)); +#374528 = PLANE('',#374529); +#374529 = AXIS2_PLACEMENT_3D('',#374530,#374531,#374532); +#374530 = CARTESIAN_POINT('',(142.56,-128.88,1.51)); +#374531 = DIRECTION('',(1.,0.,-0.)); +#374532 = DIRECTION('',(0.,-1.,0.)); +#374533 = ADVANCED_FACE('',(#374534),#374561,.T.); +#374534 = FACE_BOUND('',#374535,.T.); +#374535 = EDGE_LOOP('',(#374536,#374537,#374546,#374554)); +#374536 = ORIENTED_EDGE('',*,*,#374515,.T.); +#374537 = ORIENTED_EDGE('',*,*,#374538,.T.); +#374538 = EDGE_CURVE('',#374508,#374539,#374541,.T.); +#374539 = VERTEX_POINT('',#374540); +#374540 = CARTESIAN_POINT('',(142.42,-129.3,1.55)); +#374541 = CIRCLE('',#374542,0.139999827125); +#374542 = AXIS2_PLACEMENT_3D('',#374543,#374544,#374545); +#374543 = CARTESIAN_POINT('',(142.42000017287,-129.1600001728,1.55)); +#374544 = DIRECTION('',(0.,0.,-1.)); +#374545 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#374546 = ORIENTED_EDGE('',*,*,#374547,.F.); +#374547 = EDGE_CURVE('',#374548,#374539,#374550,.T.); +#374548 = VERTEX_POINT('',#374549); +#374549 = CARTESIAN_POINT('',(142.42,-129.3,1.51)); +#374550 = LINE('',#374551,#374552); +#374551 = CARTESIAN_POINT('',(142.42,-129.3,1.51)); +#374552 = VECTOR('',#374553,1.); +#374553 = DIRECTION('',(0.,0.,1.)); +#374554 = ORIENTED_EDGE('',*,*,#374555,.F.); +#374555 = EDGE_CURVE('',#374516,#374548,#374556,.T.); +#374556 = CIRCLE('',#374557,0.139999827125); +#374557 = AXIS2_PLACEMENT_3D('',#374558,#374559,#374560); +#374558 = CARTESIAN_POINT('',(142.42000017287,-129.1600001728,1.51)); +#374559 = DIRECTION('',(0.,0.,-1.)); +#374560 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#374561 = CYLINDRICAL_SURFACE('',#374562,0.139999827125); +#374562 = AXIS2_PLACEMENT_3D('',#374563,#374564,#374565); +#374563 = CARTESIAN_POINT('',(142.42000017287,-129.1600001728,1.51)); +#374564 = DIRECTION('',(0.,0.,-1.)); +#374565 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#374566 = ADVANCED_FACE('',(#374567),#374592,.T.); +#374567 = FACE_BOUND('',#374568,.T.); +#374568 = EDGE_LOOP('',(#374569,#374570,#374578,#374586)); +#374569 = ORIENTED_EDGE('',*,*,#374547,.T.); +#374570 = ORIENTED_EDGE('',*,*,#374571,.T.); +#374571 = EDGE_CURVE('',#374539,#374572,#374574,.T.); +#374572 = VERTEX_POINT('',#374573); +#374573 = CARTESIAN_POINT('',(142.08,-129.3,1.55)); +#374574 = LINE('',#374575,#374576); +#374575 = CARTESIAN_POINT('',(142.42,-129.3,1.55)); +#374576 = VECTOR('',#374577,1.); +#374577 = DIRECTION('',(-1.,0.,0.)); +#374578 = ORIENTED_EDGE('',*,*,#374579,.F.); +#374579 = EDGE_CURVE('',#374580,#374572,#374582,.T.); +#374580 = VERTEX_POINT('',#374581); +#374581 = CARTESIAN_POINT('',(142.08,-129.3,1.51)); +#374582 = LINE('',#374583,#374584); +#374583 = CARTESIAN_POINT('',(142.08,-129.3,1.51)); +#374584 = VECTOR('',#374585,1.); +#374585 = DIRECTION('',(0.,0.,1.)); +#374586 = ORIENTED_EDGE('',*,*,#374587,.F.); +#374587 = EDGE_CURVE('',#374548,#374580,#374588,.T.); +#374588 = LINE('',#374589,#374590); +#374589 = CARTESIAN_POINT('',(142.42,-129.3,1.51)); +#374590 = VECTOR('',#374591,1.); +#374591 = DIRECTION('',(-1.,0.,0.)); +#374592 = PLANE('',#374593); +#374593 = AXIS2_PLACEMENT_3D('',#374594,#374595,#374596); +#374594 = CARTESIAN_POINT('',(142.42,-129.3,1.51)); +#374595 = DIRECTION('',(0.,-1.,0.)); +#374596 = DIRECTION('',(-1.,0.,0.)); +#374597 = ADVANCED_FACE('',(#374598),#374625,.T.); +#374598 = FACE_BOUND('',#374599,.T.); +#374599 = EDGE_LOOP('',(#374600,#374601,#374610,#374618)); +#374600 = ORIENTED_EDGE('',*,*,#374579,.T.); +#374601 = ORIENTED_EDGE('',*,*,#374602,.T.); +#374602 = EDGE_CURVE('',#374572,#374603,#374605,.T.); +#374603 = VERTEX_POINT('',#374604); +#374604 = CARTESIAN_POINT('',(141.94,-129.16,1.55)); +#374605 = CIRCLE('',#374606,0.139999827125); +#374606 = AXIS2_PLACEMENT_3D('',#374607,#374608,#374609); +#374607 = CARTESIAN_POINT('',(142.07999982712,-129.1600001728,1.55)); +#374608 = DIRECTION('',(0.,0.,-1.)); +#374609 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#374610 = ORIENTED_EDGE('',*,*,#374611,.F.); +#374611 = EDGE_CURVE('',#374612,#374603,#374614,.T.); +#374612 = VERTEX_POINT('',#374613); +#374613 = CARTESIAN_POINT('',(141.94,-129.16,1.51)); +#374614 = LINE('',#374615,#374616); +#374615 = CARTESIAN_POINT('',(141.94,-129.16,1.51)); +#374616 = VECTOR('',#374617,1.); +#374617 = DIRECTION('',(0.,0.,1.)); +#374618 = ORIENTED_EDGE('',*,*,#374619,.F.); +#374619 = EDGE_CURVE('',#374580,#374612,#374620,.T.); +#374620 = CIRCLE('',#374621,0.139999827125); +#374621 = AXIS2_PLACEMENT_3D('',#374622,#374623,#374624); +#374622 = CARTESIAN_POINT('',(142.07999982712,-129.1600001728,1.51)); +#374623 = DIRECTION('',(0.,0.,-1.)); +#374624 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#374625 = CYLINDRICAL_SURFACE('',#374626,0.139999827125); +#374626 = AXIS2_PLACEMENT_3D('',#374627,#374628,#374629); +#374627 = CARTESIAN_POINT('',(142.07999982712,-129.1600001728,1.51)); +#374628 = DIRECTION('',(0.,0.,-1.)); +#374629 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#374630 = ADVANCED_FACE('',(#374631),#374647,.T.); +#374631 = FACE_BOUND('',#374632,.T.); +#374632 = EDGE_LOOP('',(#374633,#374634,#374640,#374641)); +#374633 = ORIENTED_EDGE('',*,*,#374611,.T.); +#374634 = ORIENTED_EDGE('',*,*,#374635,.T.); +#374635 = EDGE_CURVE('',#374603,#374403,#374636,.T.); +#374636 = LINE('',#374637,#374638); +#374637 = CARTESIAN_POINT('',(141.94,-129.16,1.55)); +#374638 = VECTOR('',#374639,1.); +#374639 = DIRECTION('',(0.,1.,0.)); +#374640 = ORIENTED_EDGE('',*,*,#374400,.F.); +#374641 = ORIENTED_EDGE('',*,*,#374642,.F.); +#374642 = EDGE_CURVE('',#374612,#374401,#374643,.T.); +#374643 = LINE('',#374644,#374645); +#374644 = CARTESIAN_POINT('',(141.94,-129.16,1.51)); +#374645 = VECTOR('',#374646,1.); +#374646 = DIRECTION('',(0.,1.,0.)); +#374647 = PLANE('',#374648); +#374648 = AXIS2_PLACEMENT_3D('',#374649,#374650,#374651); +#374649 = CARTESIAN_POINT('',(141.94,-129.16,1.51)); +#374650 = DIRECTION('',(-1.,0.,0.)); +#374651 = DIRECTION('',(0.,1.,0.)); +#374652 = ADVANCED_FACE('',(#374653),#374663,.F.); +#374653 = FACE_BOUND('',#374654,.T.); +#374654 = EDGE_LOOP('',(#374655,#374656,#374657,#374658,#374659,#374660, + #374661,#374662)); +#374655 = ORIENTED_EDGE('',*,*,#374427,.T.); +#374656 = ORIENTED_EDGE('',*,*,#374459,.T.); +#374657 = ORIENTED_EDGE('',*,*,#374491,.T.); +#374658 = ORIENTED_EDGE('',*,*,#374523,.T.); +#374659 = ORIENTED_EDGE('',*,*,#374555,.T.); +#374660 = ORIENTED_EDGE('',*,*,#374587,.T.); +#374661 = ORIENTED_EDGE('',*,*,#374619,.T.); +#374662 = ORIENTED_EDGE('',*,*,#374642,.T.); +#374663 = PLANE('',#374664); +#374664 = AXIS2_PLACEMENT_3D('',#374665,#374666,#374667); +#374665 = CARTESIAN_POINT('',(0.,0.,1.51)); +#374666 = DIRECTION('',(0.,0.,1.)); +#374667 = DIRECTION('',(1.,0.,-0.)); +#374668 = ADVANCED_FACE('',(#374669),#374679,.T.); +#374669 = FACE_BOUND('',#374670,.F.); +#374670 = EDGE_LOOP('',(#374671,#374672,#374673,#374674,#374675,#374676, + #374677,#374678)); +#374671 = ORIENTED_EDGE('',*,*,#374410,.T.); +#374672 = ORIENTED_EDGE('',*,*,#374443,.T.); +#374673 = ORIENTED_EDGE('',*,*,#374474,.T.); +#374674 = ORIENTED_EDGE('',*,*,#374507,.T.); +#374675 = ORIENTED_EDGE('',*,*,#374538,.T.); +#374676 = ORIENTED_EDGE('',*,*,#374571,.T.); +#374677 = ORIENTED_EDGE('',*,*,#374602,.T.); +#374678 = ORIENTED_EDGE('',*,*,#374635,.T.); +#374679 = PLANE('',#374680); +#374680 = AXIS2_PLACEMENT_3D('',#374681,#374682,#374683); +#374681 = CARTESIAN_POINT('',(0.,0.,1.55)); +#374682 = DIRECTION('',(0.,0.,1.)); +#374683 = DIRECTION('',(1.,0.,-0.)); +#374684 = MANIFOLD_SOLID_BREP('',#374685); +#374685 = CLOSED_SHELL('',(#374686,#374728,#374759,#374792,#374823, + #374856,#374887,#374920,#374942,#374958)); +#374686 = ADVANCED_FACE('',(#374687),#374723,.T.); +#374687 = FACE_BOUND('',#374688,.T.); +#374688 = EDGE_LOOP('',(#374689,#374699,#374708,#374716)); +#374689 = ORIENTED_EDGE('',*,*,#374690,.T.); +#374690 = EDGE_CURVE('',#374691,#374693,#374695,.T.); +#374691 = VERTEX_POINT('',#374692); +#374692 = CARTESIAN_POINT('',(123.4,-85.825,1.51)); +#374693 = VERTEX_POINT('',#374694); +#374694 = CARTESIAN_POINT('',(123.4,-85.825,1.55)); +#374695 = LINE('',#374696,#374697); +#374696 = CARTESIAN_POINT('',(123.4,-85.825,1.51)); +#374697 = VECTOR('',#374698,1.); +#374698 = DIRECTION('',(0.,0.,1.)); +#374699 = ORIENTED_EDGE('',*,*,#374700,.T.); +#374700 = EDGE_CURVE('',#374693,#374701,#374703,.T.); +#374701 = VERTEX_POINT('',#374702); +#374702 = CARTESIAN_POINT('',(123.65,-85.575,1.55)); +#374703 = CIRCLE('',#374704,0.249998959685); +#374704 = AXIS2_PLACEMENT_3D('',#374705,#374706,#374707); +#374705 = CARTESIAN_POINT('',(123.64999895968,-85.82499895968,1.55)); +#374706 = DIRECTION('',(0.,0.,-1.)); +#374707 = DIRECTION('',(-0.999999999991,-4.161285837067E-06,-0.)); +#374708 = ORIENTED_EDGE('',*,*,#374709,.F.); +#374709 = EDGE_CURVE('',#374710,#374701,#374712,.T.); +#374710 = VERTEX_POINT('',#374711); +#374711 = CARTESIAN_POINT('',(123.65,-85.575,1.51)); +#374712 = LINE('',#374713,#374714); +#374713 = CARTESIAN_POINT('',(123.65,-85.575,1.51)); +#374714 = VECTOR('',#374715,1.); +#374715 = DIRECTION('',(0.,0.,1.)); +#374716 = ORIENTED_EDGE('',*,*,#374717,.F.); +#374717 = EDGE_CURVE('',#374691,#374710,#374718,.T.); +#374718 = CIRCLE('',#374719,0.249998959685); +#374719 = AXIS2_PLACEMENT_3D('',#374720,#374721,#374722); +#374720 = CARTESIAN_POINT('',(123.64999895968,-85.82499895968,1.51)); +#374721 = DIRECTION('',(0.,0.,-1.)); +#374722 = DIRECTION('',(-0.999999999991,-4.161285837067E-06,-0.)); +#374723 = CYLINDRICAL_SURFACE('',#374724,0.249998959685); +#374724 = AXIS2_PLACEMENT_3D('',#374725,#374726,#374727); +#374725 = CARTESIAN_POINT('',(123.64999895968,-85.82499895968,1.51)); +#374726 = DIRECTION('',(0.,0.,-1.)); +#374727 = DIRECTION('',(-0.999999999991,-4.161285837067E-06,-0.)); +#374728 = ADVANCED_FACE('',(#374729),#374754,.T.); +#374729 = FACE_BOUND('',#374730,.T.); +#374730 = EDGE_LOOP('',(#374731,#374732,#374740,#374748)); +#374731 = ORIENTED_EDGE('',*,*,#374709,.T.); +#374732 = ORIENTED_EDGE('',*,*,#374733,.T.); +#374733 = EDGE_CURVE('',#374701,#374734,#374736,.T.); +#374734 = VERTEX_POINT('',#374735); +#374735 = CARTESIAN_POINT('',(124.15,-85.575,1.55)); +#374736 = LINE('',#374737,#374738); +#374737 = CARTESIAN_POINT('',(123.65,-85.575,1.55)); +#374738 = VECTOR('',#374739,1.); +#374739 = DIRECTION('',(1.,0.,0.)); +#374740 = ORIENTED_EDGE('',*,*,#374741,.F.); +#374741 = EDGE_CURVE('',#374742,#374734,#374744,.T.); +#374742 = VERTEX_POINT('',#374743); +#374743 = CARTESIAN_POINT('',(124.15,-85.575,1.51)); +#374744 = LINE('',#374745,#374746); +#374745 = CARTESIAN_POINT('',(124.15,-85.575,1.51)); +#374746 = VECTOR('',#374747,1.); +#374747 = DIRECTION('',(0.,0.,1.)); +#374748 = ORIENTED_EDGE('',*,*,#374749,.F.); +#374749 = EDGE_CURVE('',#374710,#374742,#374750,.T.); +#374750 = LINE('',#374751,#374752); +#374751 = CARTESIAN_POINT('',(123.65,-85.575,1.51)); +#374752 = VECTOR('',#374753,1.); +#374753 = DIRECTION('',(1.,0.,0.)); +#374754 = PLANE('',#374755); +#374755 = AXIS2_PLACEMENT_3D('',#374756,#374757,#374758); +#374756 = CARTESIAN_POINT('',(123.65,-85.575,1.51)); +#374757 = DIRECTION('',(0.,1.,0.)); +#374758 = DIRECTION('',(1.,0.,0.)); +#374759 = ADVANCED_FACE('',(#374760),#374787,.T.); +#374760 = FACE_BOUND('',#374761,.T.); +#374761 = EDGE_LOOP('',(#374762,#374763,#374772,#374780)); +#374762 = ORIENTED_EDGE('',*,*,#374741,.T.); +#374763 = ORIENTED_EDGE('',*,*,#374764,.T.); +#374764 = EDGE_CURVE('',#374734,#374765,#374767,.T.); +#374765 = VERTEX_POINT('',#374766); +#374766 = CARTESIAN_POINT('',(124.4,-85.825,1.55)); +#374767 = CIRCLE('',#374768,0.249998959685); +#374768 = AXIS2_PLACEMENT_3D('',#374769,#374770,#374771); +#374769 = CARTESIAN_POINT('',(124.15000104031,-85.82499895968,1.55)); +#374770 = DIRECTION('',(0.,0.,-1.)); +#374771 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#374772 = ORIENTED_EDGE('',*,*,#374773,.F.); +#374773 = EDGE_CURVE('',#374774,#374765,#374776,.T.); +#374774 = VERTEX_POINT('',#374775); +#374775 = CARTESIAN_POINT('',(124.4,-85.825,1.51)); +#374776 = LINE('',#374777,#374778); +#374777 = CARTESIAN_POINT('',(124.4,-85.825,1.51)); +#374778 = VECTOR('',#374779,1.); +#374779 = DIRECTION('',(0.,0.,1.)); +#374780 = ORIENTED_EDGE('',*,*,#374781,.F.); +#374781 = EDGE_CURVE('',#374742,#374774,#374782,.T.); +#374782 = CIRCLE('',#374783,0.249998959685); +#374783 = AXIS2_PLACEMENT_3D('',#374784,#374785,#374786); +#374784 = CARTESIAN_POINT('',(124.15000104031,-85.82499895968,1.51)); +#374785 = DIRECTION('',(0.,0.,-1.)); +#374786 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#374787 = CYLINDRICAL_SURFACE('',#374788,0.249998959685); +#374788 = AXIS2_PLACEMENT_3D('',#374789,#374790,#374791); +#374789 = CARTESIAN_POINT('',(124.15000104031,-85.82499895968,1.51)); +#374790 = DIRECTION('',(0.,0.,-1.)); +#374791 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#374792 = ADVANCED_FACE('',(#374793),#374818,.T.); +#374793 = FACE_BOUND('',#374794,.T.); +#374794 = EDGE_LOOP('',(#374795,#374796,#374804,#374812)); +#374795 = ORIENTED_EDGE('',*,*,#374773,.T.); +#374796 = ORIENTED_EDGE('',*,*,#374797,.T.); +#374797 = EDGE_CURVE('',#374765,#374798,#374800,.T.); +#374798 = VERTEX_POINT('',#374799); +#374799 = CARTESIAN_POINT('',(124.4,-86.775,1.55)); +#374800 = LINE('',#374801,#374802); +#374801 = CARTESIAN_POINT('',(124.4,-85.825,1.55)); +#374802 = VECTOR('',#374803,1.); +#374803 = DIRECTION('',(0.,-1.,0.)); +#374804 = ORIENTED_EDGE('',*,*,#374805,.F.); +#374805 = EDGE_CURVE('',#374806,#374798,#374808,.T.); +#374806 = VERTEX_POINT('',#374807); +#374807 = CARTESIAN_POINT('',(124.4,-86.775,1.51)); +#374808 = LINE('',#374809,#374810); +#374809 = CARTESIAN_POINT('',(124.4,-86.775,1.51)); +#374810 = VECTOR('',#374811,1.); +#374811 = DIRECTION('',(0.,0.,1.)); +#374812 = ORIENTED_EDGE('',*,*,#374813,.F.); +#374813 = EDGE_CURVE('',#374774,#374806,#374814,.T.); +#374814 = LINE('',#374815,#374816); +#374815 = CARTESIAN_POINT('',(124.4,-85.825,1.51)); +#374816 = VECTOR('',#374817,1.); +#374817 = DIRECTION('',(0.,-1.,0.)); +#374818 = PLANE('',#374819); +#374819 = AXIS2_PLACEMENT_3D('',#374820,#374821,#374822); +#374820 = CARTESIAN_POINT('',(124.4,-85.825,1.51)); +#374821 = DIRECTION('',(1.,0.,-0.)); +#374822 = DIRECTION('',(0.,-1.,0.)); +#374823 = ADVANCED_FACE('',(#374824),#374851,.T.); +#374824 = FACE_BOUND('',#374825,.T.); +#374825 = EDGE_LOOP('',(#374826,#374827,#374836,#374844)); +#374826 = ORIENTED_EDGE('',*,*,#374805,.T.); +#374827 = ORIENTED_EDGE('',*,*,#374828,.T.); +#374828 = EDGE_CURVE('',#374798,#374829,#374831,.T.); +#374829 = VERTEX_POINT('',#374830); +#374830 = CARTESIAN_POINT('',(124.15,-87.025,1.55)); +#374831 = CIRCLE('',#374832,0.249998959685); +#374832 = AXIS2_PLACEMENT_3D('',#374833,#374834,#374835); +#374833 = CARTESIAN_POINT('',(124.15000104031,-86.77500104031,1.55)); +#374834 = DIRECTION('',(0.,0.,-1.)); +#374835 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#374836 = ORIENTED_EDGE('',*,*,#374837,.F.); +#374837 = EDGE_CURVE('',#374838,#374829,#374840,.T.); +#374838 = VERTEX_POINT('',#374839); +#374839 = CARTESIAN_POINT('',(124.15,-87.025,1.51)); +#374840 = LINE('',#374841,#374842); +#374841 = CARTESIAN_POINT('',(124.15,-87.025,1.51)); +#374842 = VECTOR('',#374843,1.); +#374843 = DIRECTION('',(0.,0.,1.)); +#374844 = ORIENTED_EDGE('',*,*,#374845,.F.); +#374845 = EDGE_CURVE('',#374806,#374838,#374846,.T.); +#374846 = CIRCLE('',#374847,0.249998959685); +#374847 = AXIS2_PLACEMENT_3D('',#374848,#374849,#374850); +#374848 = CARTESIAN_POINT('',(124.15000104031,-86.77500104031,1.51)); +#374849 = DIRECTION('',(0.,0.,-1.)); +#374850 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#374851 = CYLINDRICAL_SURFACE('',#374852,0.249998959685); +#374852 = AXIS2_PLACEMENT_3D('',#374853,#374854,#374855); +#374853 = CARTESIAN_POINT('',(124.15000104031,-86.77500104031,1.51)); +#374854 = DIRECTION('',(0.,0.,-1.)); +#374855 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#374856 = ADVANCED_FACE('',(#374857),#374882,.T.); +#374857 = FACE_BOUND('',#374858,.T.); +#374858 = EDGE_LOOP('',(#374859,#374860,#374868,#374876)); +#374859 = ORIENTED_EDGE('',*,*,#374837,.T.); +#374860 = ORIENTED_EDGE('',*,*,#374861,.T.); +#374861 = EDGE_CURVE('',#374829,#374862,#374864,.T.); +#374862 = VERTEX_POINT('',#374863); +#374863 = CARTESIAN_POINT('',(123.65,-87.025,1.55)); +#374864 = LINE('',#374865,#374866); +#374865 = CARTESIAN_POINT('',(124.15,-87.025,1.55)); +#374866 = VECTOR('',#374867,1.); +#374867 = DIRECTION('',(-1.,0.,0.)); +#374868 = ORIENTED_EDGE('',*,*,#374869,.F.); +#374869 = EDGE_CURVE('',#374870,#374862,#374872,.T.); +#374870 = VERTEX_POINT('',#374871); +#374871 = CARTESIAN_POINT('',(123.65,-87.025,1.51)); +#374872 = LINE('',#374873,#374874); +#374873 = CARTESIAN_POINT('',(123.65,-87.025,1.51)); +#374874 = VECTOR('',#374875,1.); +#374875 = DIRECTION('',(0.,0.,1.)); +#374876 = ORIENTED_EDGE('',*,*,#374877,.F.); +#374877 = EDGE_CURVE('',#374838,#374870,#374878,.T.); +#374878 = LINE('',#374879,#374880); +#374879 = CARTESIAN_POINT('',(124.15,-87.025,1.51)); +#374880 = VECTOR('',#374881,1.); +#374881 = DIRECTION('',(-1.,0.,0.)); +#374882 = PLANE('',#374883); +#374883 = AXIS2_PLACEMENT_3D('',#374884,#374885,#374886); +#374884 = CARTESIAN_POINT('',(124.15,-87.025,1.51)); +#374885 = DIRECTION('',(0.,-1.,0.)); +#374886 = DIRECTION('',(-1.,0.,0.)); +#374887 = ADVANCED_FACE('',(#374888),#374915,.T.); +#374888 = FACE_BOUND('',#374889,.T.); +#374889 = EDGE_LOOP('',(#374890,#374891,#374900,#374908)); +#374890 = ORIENTED_EDGE('',*,*,#374869,.T.); +#374891 = ORIENTED_EDGE('',*,*,#374892,.T.); +#374892 = EDGE_CURVE('',#374862,#374893,#374895,.T.); +#374893 = VERTEX_POINT('',#374894); +#374894 = CARTESIAN_POINT('',(123.4,-86.775,1.55)); +#374895 = CIRCLE('',#374896,0.249998959685); +#374896 = AXIS2_PLACEMENT_3D('',#374897,#374898,#374899); +#374897 = CARTESIAN_POINT('',(123.64999895968,-86.77500104031,1.55)); +#374898 = DIRECTION('',(0.,0.,-1.)); +#374899 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#374900 = ORIENTED_EDGE('',*,*,#374901,.F.); +#374901 = EDGE_CURVE('',#374902,#374893,#374904,.T.); +#374902 = VERTEX_POINT('',#374903); +#374903 = CARTESIAN_POINT('',(123.4,-86.775,1.51)); +#374904 = LINE('',#374905,#374906); +#374905 = CARTESIAN_POINT('',(123.4,-86.775,1.51)); +#374906 = VECTOR('',#374907,1.); +#374907 = DIRECTION('',(0.,0.,1.)); +#374908 = ORIENTED_EDGE('',*,*,#374909,.F.); +#374909 = EDGE_CURVE('',#374870,#374902,#374910,.T.); +#374910 = CIRCLE('',#374911,0.249998959685); +#374911 = AXIS2_PLACEMENT_3D('',#374912,#374913,#374914); +#374912 = CARTESIAN_POINT('',(123.64999895968,-86.77500104031,1.51)); +#374913 = DIRECTION('',(0.,0.,-1.)); +#374914 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#374915 = CYLINDRICAL_SURFACE('',#374916,0.249998959685); +#374916 = AXIS2_PLACEMENT_3D('',#374917,#374918,#374919); +#374917 = CARTESIAN_POINT('',(123.64999895968,-86.77500104031,1.51)); +#374918 = DIRECTION('',(0.,0.,-1.)); +#374919 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#374920 = ADVANCED_FACE('',(#374921),#374937,.T.); +#374921 = FACE_BOUND('',#374922,.T.); +#374922 = EDGE_LOOP('',(#374923,#374924,#374930,#374931)); +#374923 = ORIENTED_EDGE('',*,*,#374901,.T.); +#374924 = ORIENTED_EDGE('',*,*,#374925,.T.); +#374925 = EDGE_CURVE('',#374893,#374693,#374926,.T.); +#374926 = LINE('',#374927,#374928); +#374927 = CARTESIAN_POINT('',(123.4,-86.775,1.55)); +#374928 = VECTOR('',#374929,1.); +#374929 = DIRECTION('',(0.,1.,0.)); +#374930 = ORIENTED_EDGE('',*,*,#374690,.F.); +#374931 = ORIENTED_EDGE('',*,*,#374932,.F.); +#374932 = EDGE_CURVE('',#374902,#374691,#374933,.T.); +#374933 = LINE('',#374934,#374935); +#374934 = CARTESIAN_POINT('',(123.4,-86.775,1.51)); +#374935 = VECTOR('',#374936,1.); +#374936 = DIRECTION('',(0.,1.,0.)); +#374937 = PLANE('',#374938); +#374938 = AXIS2_PLACEMENT_3D('',#374939,#374940,#374941); +#374939 = CARTESIAN_POINT('',(123.4,-86.775,1.51)); +#374940 = DIRECTION('',(-1.,0.,0.)); +#374941 = DIRECTION('',(0.,1.,0.)); +#374942 = ADVANCED_FACE('',(#374943),#374953,.F.); +#374943 = FACE_BOUND('',#374944,.T.); +#374944 = EDGE_LOOP('',(#374945,#374946,#374947,#374948,#374949,#374950, + #374951,#374952)); +#374945 = ORIENTED_EDGE('',*,*,#374717,.T.); +#374946 = ORIENTED_EDGE('',*,*,#374749,.T.); +#374947 = ORIENTED_EDGE('',*,*,#374781,.T.); +#374948 = ORIENTED_EDGE('',*,*,#374813,.T.); +#374949 = ORIENTED_EDGE('',*,*,#374845,.T.); +#374950 = ORIENTED_EDGE('',*,*,#374877,.T.); +#374951 = ORIENTED_EDGE('',*,*,#374909,.T.); +#374952 = ORIENTED_EDGE('',*,*,#374932,.T.); +#374953 = PLANE('',#374954); +#374954 = AXIS2_PLACEMENT_3D('',#374955,#374956,#374957); +#374955 = CARTESIAN_POINT('',(0.,0.,1.51)); +#374956 = DIRECTION('',(0.,0.,1.)); +#374957 = DIRECTION('',(1.,0.,-0.)); +#374958 = ADVANCED_FACE('',(#374959),#374969,.T.); +#374959 = FACE_BOUND('',#374960,.F.); +#374960 = EDGE_LOOP('',(#374961,#374962,#374963,#374964,#374965,#374966, + #374967,#374968)); +#374961 = ORIENTED_EDGE('',*,*,#374700,.T.); +#374962 = ORIENTED_EDGE('',*,*,#374733,.T.); +#374963 = ORIENTED_EDGE('',*,*,#374764,.T.); +#374964 = ORIENTED_EDGE('',*,*,#374797,.T.); +#374965 = ORIENTED_EDGE('',*,*,#374828,.T.); +#374966 = ORIENTED_EDGE('',*,*,#374861,.T.); +#374967 = ORIENTED_EDGE('',*,*,#374892,.T.); +#374968 = ORIENTED_EDGE('',*,*,#374925,.T.); +#374969 = PLANE('',#374970); +#374970 = AXIS2_PLACEMENT_3D('',#374971,#374972,#374973); +#374971 = CARTESIAN_POINT('',(0.,0.,1.55)); +#374972 = DIRECTION('',(0.,0.,1.)); +#374973 = DIRECTION('',(1.,0.,-0.)); +#374974 = MANIFOLD_SOLID_BREP('',#374975); +#374975 = CLOSED_SHELL('',(#374976,#375018,#375049,#375082,#375113, + #375146,#375177,#375210,#375232,#375248)); +#374976 = ADVANCED_FACE('',(#374977),#375013,.T.); +#374977 = FACE_BOUND('',#374978,.T.); +#374978 = EDGE_LOOP('',(#374979,#374989,#374998,#375006)); +#374979 = ORIENTED_EDGE('',*,*,#374980,.T.); +#374980 = EDGE_CURVE('',#374981,#374983,#374985,.T.); +#374981 = VERTEX_POINT('',#374982); +#374982 = CARTESIAN_POINT('',(148.19,-92.38,1.51)); +#374983 = VERTEX_POINT('',#374984); +#374984 = CARTESIAN_POINT('',(148.19,-92.38,1.55)); +#374985 = LINE('',#374986,#374987); +#374986 = CARTESIAN_POINT('',(148.19,-92.38,1.51)); +#374987 = VECTOR('',#374988,1.); +#374988 = DIRECTION('',(0.,0.,1.)); +#374989 = ORIENTED_EDGE('',*,*,#374990,.T.); +#374990 = EDGE_CURVE('',#374983,#374991,#374993,.T.); +#374991 = VERTEX_POINT('',#374992); +#374992 = CARTESIAN_POINT('',(148.33,-92.24,1.55)); +#374993 = CIRCLE('',#374994,0.139999827125); +#374994 = AXIS2_PLACEMENT_3D('',#374995,#374996,#374997); +#374995 = CARTESIAN_POINT('',(148.32999982712,-92.37999982712,1.55)); +#374996 = DIRECTION('',(0.,0.,-1.)); +#374997 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#374998 = ORIENTED_EDGE('',*,*,#374999,.F.); +#374999 = EDGE_CURVE('',#375000,#374991,#375002,.T.); +#375000 = VERTEX_POINT('',#375001); +#375001 = CARTESIAN_POINT('',(148.33,-92.24,1.51)); +#375002 = LINE('',#375003,#375004); +#375003 = CARTESIAN_POINT('',(148.33,-92.24,1.51)); +#375004 = VECTOR('',#375005,1.); +#375005 = DIRECTION('',(0.,0.,1.)); +#375006 = ORIENTED_EDGE('',*,*,#375007,.F.); +#375007 = EDGE_CURVE('',#374981,#375000,#375008,.T.); +#375008 = CIRCLE('',#375009,0.139999827125); +#375009 = AXIS2_PLACEMENT_3D('',#375010,#375011,#375012); +#375010 = CARTESIAN_POINT('',(148.32999982712,-92.37999982712,1.51)); +#375011 = DIRECTION('',(0.,0.,-1.)); +#375012 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#375013 = CYLINDRICAL_SURFACE('',#375014,0.139999827125); +#375014 = AXIS2_PLACEMENT_3D('',#375015,#375016,#375017); +#375015 = CARTESIAN_POINT('',(148.32999982712,-92.37999982712,1.51)); +#375016 = DIRECTION('',(0.,0.,-1.)); +#375017 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#375018 = ADVANCED_FACE('',(#375019),#375044,.T.); +#375019 = FACE_BOUND('',#375020,.T.); +#375020 = EDGE_LOOP('',(#375021,#375022,#375030,#375038)); +#375021 = ORIENTED_EDGE('',*,*,#374999,.T.); +#375022 = ORIENTED_EDGE('',*,*,#375023,.T.); +#375023 = EDGE_CURVE('',#374991,#375024,#375026,.T.); +#375024 = VERTEX_POINT('',#375025); +#375025 = CARTESIAN_POINT('',(148.67,-92.24,1.55)); +#375026 = LINE('',#375027,#375028); +#375027 = CARTESIAN_POINT('',(148.33,-92.24,1.55)); +#375028 = VECTOR('',#375029,1.); +#375029 = DIRECTION('',(1.,0.,0.)); +#375030 = ORIENTED_EDGE('',*,*,#375031,.F.); +#375031 = EDGE_CURVE('',#375032,#375024,#375034,.T.); +#375032 = VERTEX_POINT('',#375033); +#375033 = CARTESIAN_POINT('',(148.67,-92.24,1.51)); +#375034 = LINE('',#375035,#375036); +#375035 = CARTESIAN_POINT('',(148.67,-92.24,1.51)); +#375036 = VECTOR('',#375037,1.); +#375037 = DIRECTION('',(0.,0.,1.)); +#375038 = ORIENTED_EDGE('',*,*,#375039,.F.); +#375039 = EDGE_CURVE('',#375000,#375032,#375040,.T.); +#375040 = LINE('',#375041,#375042); +#375041 = CARTESIAN_POINT('',(148.33,-92.24,1.51)); +#375042 = VECTOR('',#375043,1.); +#375043 = DIRECTION('',(1.,0.,0.)); +#375044 = PLANE('',#375045); +#375045 = AXIS2_PLACEMENT_3D('',#375046,#375047,#375048); +#375046 = CARTESIAN_POINT('',(148.33,-92.24,1.51)); +#375047 = DIRECTION('',(0.,1.,0.)); +#375048 = DIRECTION('',(1.,0.,0.)); +#375049 = ADVANCED_FACE('',(#375050),#375077,.T.); +#375050 = FACE_BOUND('',#375051,.T.); +#375051 = EDGE_LOOP('',(#375052,#375053,#375062,#375070)); +#375052 = ORIENTED_EDGE('',*,*,#375031,.T.); +#375053 = ORIENTED_EDGE('',*,*,#375054,.T.); +#375054 = EDGE_CURVE('',#375024,#375055,#375057,.T.); +#375055 = VERTEX_POINT('',#375056); +#375056 = CARTESIAN_POINT('',(148.81,-92.38,1.55)); +#375057 = CIRCLE('',#375058,0.139999827125); +#375058 = AXIS2_PLACEMENT_3D('',#375059,#375060,#375061); +#375059 = CARTESIAN_POINT('',(148.67000017287,-92.37999982712,1.55)); +#375060 = DIRECTION('',(0.,0.,-1.)); +#375061 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#375062 = ORIENTED_EDGE('',*,*,#375063,.F.); +#375063 = EDGE_CURVE('',#375064,#375055,#375066,.T.); +#375064 = VERTEX_POINT('',#375065); +#375065 = CARTESIAN_POINT('',(148.81,-92.38,1.51)); +#375066 = LINE('',#375067,#375068); +#375067 = CARTESIAN_POINT('',(148.81,-92.38,1.51)); +#375068 = VECTOR('',#375069,1.); +#375069 = DIRECTION('',(0.,0.,1.)); +#375070 = ORIENTED_EDGE('',*,*,#375071,.F.); +#375071 = EDGE_CURVE('',#375032,#375064,#375072,.T.); +#375072 = CIRCLE('',#375073,0.139999827125); +#375073 = AXIS2_PLACEMENT_3D('',#375074,#375075,#375076); +#375074 = CARTESIAN_POINT('',(148.67000017287,-92.37999982712,1.51)); +#375075 = DIRECTION('',(0.,0.,-1.)); +#375076 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#375077 = CYLINDRICAL_SURFACE('',#375078,0.139999827125); +#375078 = AXIS2_PLACEMENT_3D('',#375079,#375080,#375081); +#375079 = CARTESIAN_POINT('',(148.67000017287,-92.37999982712,1.51)); +#375080 = DIRECTION('',(0.,0.,-1.)); +#375081 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#375082 = ADVANCED_FACE('',(#375083),#375108,.T.); +#375083 = FACE_BOUND('',#375084,.T.); +#375084 = EDGE_LOOP('',(#375085,#375086,#375094,#375102)); +#375085 = ORIENTED_EDGE('',*,*,#375063,.T.); +#375086 = ORIENTED_EDGE('',*,*,#375087,.T.); +#375087 = EDGE_CURVE('',#375055,#375088,#375090,.T.); +#375088 = VERTEX_POINT('',#375089); +#375089 = CARTESIAN_POINT('',(148.81,-92.66,1.55)); +#375090 = LINE('',#375091,#375092); +#375091 = CARTESIAN_POINT('',(148.81,-92.38,1.55)); +#375092 = VECTOR('',#375093,1.); +#375093 = DIRECTION('',(0.,-1.,0.)); +#375094 = ORIENTED_EDGE('',*,*,#375095,.F.); +#375095 = EDGE_CURVE('',#375096,#375088,#375098,.T.); +#375096 = VERTEX_POINT('',#375097); +#375097 = CARTESIAN_POINT('',(148.81,-92.66,1.51)); +#375098 = LINE('',#375099,#375100); +#375099 = CARTESIAN_POINT('',(148.81,-92.66,1.51)); +#375100 = VECTOR('',#375101,1.); +#375101 = DIRECTION('',(0.,0.,1.)); +#375102 = ORIENTED_EDGE('',*,*,#375103,.F.); +#375103 = EDGE_CURVE('',#375064,#375096,#375104,.T.); +#375104 = LINE('',#375105,#375106); +#375105 = CARTESIAN_POINT('',(148.81,-92.38,1.51)); +#375106 = VECTOR('',#375107,1.); +#375107 = DIRECTION('',(0.,-1.,0.)); +#375108 = PLANE('',#375109); +#375109 = AXIS2_PLACEMENT_3D('',#375110,#375111,#375112); +#375110 = CARTESIAN_POINT('',(148.81,-92.38,1.51)); +#375111 = DIRECTION('',(1.,0.,-0.)); +#375112 = DIRECTION('',(0.,-1.,0.)); +#375113 = ADVANCED_FACE('',(#375114),#375141,.T.); +#375114 = FACE_BOUND('',#375115,.T.); +#375115 = EDGE_LOOP('',(#375116,#375117,#375126,#375134)); +#375116 = ORIENTED_EDGE('',*,*,#375095,.T.); +#375117 = ORIENTED_EDGE('',*,*,#375118,.T.); +#375118 = EDGE_CURVE('',#375088,#375119,#375121,.T.); +#375119 = VERTEX_POINT('',#375120); +#375120 = CARTESIAN_POINT('',(148.67,-92.8,1.55)); +#375121 = CIRCLE('',#375122,0.139999827125); +#375122 = AXIS2_PLACEMENT_3D('',#375123,#375124,#375125); +#375123 = CARTESIAN_POINT('',(148.67000017287,-92.66000017287,1.55)); +#375124 = DIRECTION('',(0.,0.,-1.)); +#375125 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#375126 = ORIENTED_EDGE('',*,*,#375127,.F.); +#375127 = EDGE_CURVE('',#375128,#375119,#375130,.T.); +#375128 = VERTEX_POINT('',#375129); +#375129 = CARTESIAN_POINT('',(148.67,-92.8,1.51)); +#375130 = LINE('',#375131,#375132); +#375131 = CARTESIAN_POINT('',(148.67,-92.8,1.51)); +#375132 = VECTOR('',#375133,1.); +#375133 = DIRECTION('',(0.,0.,1.)); +#375134 = ORIENTED_EDGE('',*,*,#375135,.F.); +#375135 = EDGE_CURVE('',#375096,#375128,#375136,.T.); +#375136 = CIRCLE('',#375137,0.139999827125); +#375137 = AXIS2_PLACEMENT_3D('',#375138,#375139,#375140); +#375138 = CARTESIAN_POINT('',(148.67000017287,-92.66000017287,1.51)); +#375139 = DIRECTION('',(0.,0.,-1.)); +#375140 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#375141 = CYLINDRICAL_SURFACE('',#375142,0.139999827125); +#375142 = AXIS2_PLACEMENT_3D('',#375143,#375144,#375145); +#375143 = CARTESIAN_POINT('',(148.67000017287,-92.66000017287,1.51)); +#375144 = DIRECTION('',(0.,0.,-1.)); +#375145 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#375146 = ADVANCED_FACE('',(#375147),#375172,.T.); +#375147 = FACE_BOUND('',#375148,.T.); +#375148 = EDGE_LOOP('',(#375149,#375150,#375158,#375166)); +#375149 = ORIENTED_EDGE('',*,*,#375127,.T.); +#375150 = ORIENTED_EDGE('',*,*,#375151,.T.); +#375151 = EDGE_CURVE('',#375119,#375152,#375154,.T.); +#375152 = VERTEX_POINT('',#375153); +#375153 = CARTESIAN_POINT('',(148.33,-92.8,1.55)); +#375154 = LINE('',#375155,#375156); +#375155 = CARTESIAN_POINT('',(148.67,-92.8,1.55)); +#375156 = VECTOR('',#375157,1.); +#375157 = DIRECTION('',(-1.,0.,0.)); +#375158 = ORIENTED_EDGE('',*,*,#375159,.F.); +#375159 = EDGE_CURVE('',#375160,#375152,#375162,.T.); +#375160 = VERTEX_POINT('',#375161); +#375161 = CARTESIAN_POINT('',(148.33,-92.8,1.51)); +#375162 = LINE('',#375163,#375164); +#375163 = CARTESIAN_POINT('',(148.33,-92.8,1.51)); +#375164 = VECTOR('',#375165,1.); +#375165 = DIRECTION('',(0.,0.,1.)); +#375166 = ORIENTED_EDGE('',*,*,#375167,.F.); +#375167 = EDGE_CURVE('',#375128,#375160,#375168,.T.); +#375168 = LINE('',#375169,#375170); +#375169 = CARTESIAN_POINT('',(148.67,-92.8,1.51)); +#375170 = VECTOR('',#375171,1.); +#375171 = DIRECTION('',(-1.,0.,0.)); +#375172 = PLANE('',#375173); +#375173 = AXIS2_PLACEMENT_3D('',#375174,#375175,#375176); +#375174 = CARTESIAN_POINT('',(148.67,-92.8,1.51)); +#375175 = DIRECTION('',(0.,-1.,0.)); +#375176 = DIRECTION('',(-1.,0.,0.)); +#375177 = ADVANCED_FACE('',(#375178),#375205,.T.); +#375178 = FACE_BOUND('',#375179,.T.); +#375179 = EDGE_LOOP('',(#375180,#375181,#375190,#375198)); +#375180 = ORIENTED_EDGE('',*,*,#375159,.T.); +#375181 = ORIENTED_EDGE('',*,*,#375182,.T.); +#375182 = EDGE_CURVE('',#375152,#375183,#375185,.T.); +#375183 = VERTEX_POINT('',#375184); +#375184 = CARTESIAN_POINT('',(148.19,-92.66,1.55)); +#375185 = CIRCLE('',#375186,0.139999827125); +#375186 = AXIS2_PLACEMENT_3D('',#375187,#375188,#375189); +#375187 = CARTESIAN_POINT('',(148.32999982712,-92.66000017287,1.55)); +#375188 = DIRECTION('',(0.,0.,-1.)); +#375189 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#375190 = ORIENTED_EDGE('',*,*,#375191,.F.); +#375191 = EDGE_CURVE('',#375192,#375183,#375194,.T.); +#375192 = VERTEX_POINT('',#375193); +#375193 = CARTESIAN_POINT('',(148.19,-92.66,1.51)); +#375194 = LINE('',#375195,#375196); +#375195 = CARTESIAN_POINT('',(148.19,-92.66,1.51)); +#375196 = VECTOR('',#375197,1.); +#375197 = DIRECTION('',(0.,0.,1.)); +#375198 = ORIENTED_EDGE('',*,*,#375199,.F.); +#375199 = EDGE_CURVE('',#375160,#375192,#375200,.T.); +#375200 = CIRCLE('',#375201,0.139999827125); +#375201 = AXIS2_PLACEMENT_3D('',#375202,#375203,#375204); +#375202 = CARTESIAN_POINT('',(148.32999982712,-92.66000017287,1.51)); +#375203 = DIRECTION('',(0.,0.,-1.)); +#375204 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#375205 = CYLINDRICAL_SURFACE('',#375206,0.139999827125); +#375206 = AXIS2_PLACEMENT_3D('',#375207,#375208,#375209); +#375207 = CARTESIAN_POINT('',(148.32999982712,-92.66000017287,1.51)); +#375208 = DIRECTION('',(0.,0.,-1.)); +#375209 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#375210 = ADVANCED_FACE('',(#375211),#375227,.T.); +#375211 = FACE_BOUND('',#375212,.T.); +#375212 = EDGE_LOOP('',(#375213,#375214,#375220,#375221)); +#375213 = ORIENTED_EDGE('',*,*,#375191,.T.); +#375214 = ORIENTED_EDGE('',*,*,#375215,.T.); +#375215 = EDGE_CURVE('',#375183,#374983,#375216,.T.); +#375216 = LINE('',#375217,#375218); +#375217 = CARTESIAN_POINT('',(148.19,-92.66,1.55)); +#375218 = VECTOR('',#375219,1.); +#375219 = DIRECTION('',(0.,1.,0.)); +#375220 = ORIENTED_EDGE('',*,*,#374980,.F.); +#375221 = ORIENTED_EDGE('',*,*,#375222,.F.); +#375222 = EDGE_CURVE('',#375192,#374981,#375223,.T.); +#375223 = LINE('',#375224,#375225); +#375224 = CARTESIAN_POINT('',(148.19,-92.66,1.51)); +#375225 = VECTOR('',#375226,1.); +#375226 = DIRECTION('',(0.,1.,0.)); +#375227 = PLANE('',#375228); +#375228 = AXIS2_PLACEMENT_3D('',#375229,#375230,#375231); +#375229 = CARTESIAN_POINT('',(148.19,-92.66,1.51)); +#375230 = DIRECTION('',(-1.,0.,0.)); +#375231 = DIRECTION('',(0.,1.,0.)); +#375232 = ADVANCED_FACE('',(#375233),#375243,.F.); +#375233 = FACE_BOUND('',#375234,.T.); +#375234 = EDGE_LOOP('',(#375235,#375236,#375237,#375238,#375239,#375240, + #375241,#375242)); +#375235 = ORIENTED_EDGE('',*,*,#375007,.T.); +#375236 = ORIENTED_EDGE('',*,*,#375039,.T.); +#375237 = ORIENTED_EDGE('',*,*,#375071,.T.); +#375238 = ORIENTED_EDGE('',*,*,#375103,.T.); +#375239 = ORIENTED_EDGE('',*,*,#375135,.T.); +#375240 = ORIENTED_EDGE('',*,*,#375167,.T.); +#375241 = ORIENTED_EDGE('',*,*,#375199,.T.); +#375242 = ORIENTED_EDGE('',*,*,#375222,.T.); +#375243 = PLANE('',#375244); +#375244 = AXIS2_PLACEMENT_3D('',#375245,#375246,#375247); +#375245 = CARTESIAN_POINT('',(0.,0.,1.51)); +#375246 = DIRECTION('',(0.,0.,1.)); +#375247 = DIRECTION('',(1.,0.,-0.)); +#375248 = ADVANCED_FACE('',(#375249),#375259,.T.); +#375249 = FACE_BOUND('',#375250,.F.); +#375250 = EDGE_LOOP('',(#375251,#375252,#375253,#375254,#375255,#375256, + #375257,#375258)); +#375251 = ORIENTED_EDGE('',*,*,#374990,.T.); +#375252 = ORIENTED_EDGE('',*,*,#375023,.T.); +#375253 = ORIENTED_EDGE('',*,*,#375054,.T.); +#375254 = ORIENTED_EDGE('',*,*,#375087,.T.); +#375255 = ORIENTED_EDGE('',*,*,#375118,.T.); +#375256 = ORIENTED_EDGE('',*,*,#375151,.T.); +#375257 = ORIENTED_EDGE('',*,*,#375182,.T.); +#375258 = ORIENTED_EDGE('',*,*,#375215,.T.); +#375259 = PLANE('',#375260); +#375260 = AXIS2_PLACEMENT_3D('',#375261,#375262,#375263); +#375261 = CARTESIAN_POINT('',(0.,0.,1.55)); +#375262 = DIRECTION('',(0.,0.,1.)); +#375263 = DIRECTION('',(1.,0.,-0.)); +#375264 = MANIFOLD_SOLID_BREP('',#375265); +#375265 = CLOSED_SHELL('',(#375266,#375308,#375339,#375372,#375403, + #375436,#375467,#375500,#375522,#375538)); +#375266 = ADVANCED_FACE('',(#375267),#375303,.T.); +#375267 = FACE_BOUND('',#375268,.T.); +#375268 = EDGE_LOOP('',(#375269,#375279,#375288,#375296)); +#375269 = ORIENTED_EDGE('',*,*,#375270,.T.); +#375270 = EDGE_CURVE('',#375271,#375273,#375275,.T.); +#375271 = VERTEX_POINT('',#375272); +#375272 = CARTESIAN_POINT('',(139.28,-146.645,1.51)); +#375273 = VERTEX_POINT('',#375274); +#375274 = CARTESIAN_POINT('',(139.28,-146.645,1.55)); +#375275 = LINE('',#375276,#375277); +#375276 = CARTESIAN_POINT('',(139.28,-146.645,1.51)); +#375277 = VECTOR('',#375278,1.); +#375278 = DIRECTION('',(0.,0.,1.)); +#375279 = ORIENTED_EDGE('',*,*,#375280,.T.); +#375280 = EDGE_CURVE('',#375273,#375281,#375283,.T.); +#375281 = VERTEX_POINT('',#375282); +#375282 = CARTESIAN_POINT('',(139.415,-146.51,1.55)); +#375283 = CIRCLE('',#375284,0.135001418495); +#375284 = AXIS2_PLACEMENT_3D('',#375285,#375286,#375287); +#375285 = CARTESIAN_POINT('',(139.41500141848,-146.6450014184,1.55)); +#375286 = DIRECTION('',(0.,0.,-1.)); +#375287 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#375288 = ORIENTED_EDGE('',*,*,#375289,.F.); +#375289 = EDGE_CURVE('',#375290,#375281,#375292,.T.); +#375290 = VERTEX_POINT('',#375291); +#375291 = CARTESIAN_POINT('',(139.415,-146.51,1.51)); +#375292 = LINE('',#375293,#375294); +#375293 = CARTESIAN_POINT('',(139.415,-146.51,1.51)); +#375294 = VECTOR('',#375295,1.); +#375295 = DIRECTION('',(0.,0.,1.)); +#375296 = ORIENTED_EDGE('',*,*,#375297,.F.); +#375297 = EDGE_CURVE('',#375271,#375290,#375298,.T.); +#375298 = CIRCLE('',#375299,0.135001418495); +#375299 = AXIS2_PLACEMENT_3D('',#375300,#375301,#375302); +#375300 = CARTESIAN_POINT('',(139.41500141848,-146.6450014184,1.51)); +#375301 = DIRECTION('',(0.,0.,-1.)); +#375302 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#375303 = CYLINDRICAL_SURFACE('',#375304,0.135001418495); +#375304 = AXIS2_PLACEMENT_3D('',#375305,#375306,#375307); +#375305 = CARTESIAN_POINT('',(139.41500141848,-146.6450014184,1.51)); +#375306 = DIRECTION('',(0.,0.,-1.)); +#375307 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#375308 = ADVANCED_FACE('',(#375309),#375334,.T.); +#375309 = FACE_BOUND('',#375310,.T.); +#375310 = EDGE_LOOP('',(#375311,#375312,#375320,#375328)); +#375311 = ORIENTED_EDGE('',*,*,#375289,.T.); +#375312 = ORIENTED_EDGE('',*,*,#375313,.T.); +#375313 = EDGE_CURVE('',#375281,#375314,#375316,.T.); +#375314 = VERTEX_POINT('',#375315); +#375315 = CARTESIAN_POINT('',(139.785,-146.51,1.55)); +#375316 = LINE('',#375317,#375318); +#375317 = CARTESIAN_POINT('',(139.415,-146.51,1.55)); +#375318 = VECTOR('',#375319,1.); +#375319 = DIRECTION('',(1.,0.,0.)); +#375320 = ORIENTED_EDGE('',*,*,#375321,.F.); +#375321 = EDGE_CURVE('',#375322,#375314,#375324,.T.); +#375322 = VERTEX_POINT('',#375323); +#375323 = CARTESIAN_POINT('',(139.785,-146.51,1.51)); +#375324 = LINE('',#375325,#375326); +#375325 = CARTESIAN_POINT('',(139.785,-146.51,1.51)); +#375326 = VECTOR('',#375327,1.); +#375327 = DIRECTION('',(0.,0.,1.)); +#375328 = ORIENTED_EDGE('',*,*,#375329,.F.); +#375329 = EDGE_CURVE('',#375290,#375322,#375330,.T.); +#375330 = LINE('',#375331,#375332); +#375331 = CARTESIAN_POINT('',(139.415,-146.51,1.51)); +#375332 = VECTOR('',#375333,1.); +#375333 = DIRECTION('',(1.,0.,0.)); +#375334 = PLANE('',#375335); +#375335 = AXIS2_PLACEMENT_3D('',#375336,#375337,#375338); +#375336 = CARTESIAN_POINT('',(139.415,-146.51,1.51)); +#375337 = DIRECTION('',(0.,1.,0.)); +#375338 = DIRECTION('',(1.,0.,0.)); +#375339 = ADVANCED_FACE('',(#375340),#375367,.T.); +#375340 = FACE_BOUND('',#375341,.T.); +#375341 = EDGE_LOOP('',(#375342,#375343,#375352,#375360)); +#375342 = ORIENTED_EDGE('',*,*,#375321,.T.); +#375343 = ORIENTED_EDGE('',*,*,#375344,.T.); +#375344 = EDGE_CURVE('',#375314,#375345,#375347,.T.); +#375345 = VERTEX_POINT('',#375346); +#375346 = CARTESIAN_POINT('',(139.92,-146.645,1.55)); +#375347 = CIRCLE('',#375348,0.135001418495); +#375348 = AXIS2_PLACEMENT_3D('',#375349,#375350,#375351); +#375349 = CARTESIAN_POINT('',(139.78499858151,-146.6450014184,1.55)); +#375350 = DIRECTION('',(0.,0.,-1.)); +#375351 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#375352 = ORIENTED_EDGE('',*,*,#375353,.F.); +#375353 = EDGE_CURVE('',#375354,#375345,#375356,.T.); +#375354 = VERTEX_POINT('',#375355); +#375355 = CARTESIAN_POINT('',(139.92,-146.645,1.51)); +#375356 = LINE('',#375357,#375358); +#375357 = CARTESIAN_POINT('',(139.92,-146.645,1.51)); +#375358 = VECTOR('',#375359,1.); +#375359 = DIRECTION('',(0.,0.,1.)); +#375360 = ORIENTED_EDGE('',*,*,#375361,.F.); +#375361 = EDGE_CURVE('',#375322,#375354,#375362,.T.); +#375362 = CIRCLE('',#375363,0.135001418495); +#375363 = AXIS2_PLACEMENT_3D('',#375364,#375365,#375366); +#375364 = CARTESIAN_POINT('',(139.78499858151,-146.6450014184,1.51)); +#375365 = DIRECTION('',(0.,0.,-1.)); +#375366 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#375367 = CYLINDRICAL_SURFACE('',#375368,0.135001418495); +#375368 = AXIS2_PLACEMENT_3D('',#375369,#375370,#375371); +#375369 = CARTESIAN_POINT('',(139.78499858151,-146.6450014184,1.51)); +#375370 = DIRECTION('',(0.,0.,-1.)); +#375371 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#375372 = ADVANCED_FACE('',(#375373),#375398,.T.); +#375373 = FACE_BOUND('',#375374,.T.); +#375374 = EDGE_LOOP('',(#375375,#375376,#375384,#375392)); +#375375 = ORIENTED_EDGE('',*,*,#375353,.T.); +#375376 = ORIENTED_EDGE('',*,*,#375377,.T.); +#375377 = EDGE_CURVE('',#375345,#375378,#375380,.T.); +#375378 = VERTEX_POINT('',#375379); +#375379 = CARTESIAN_POINT('',(139.92,-146.915,1.55)); +#375380 = LINE('',#375381,#375382); +#375381 = CARTESIAN_POINT('',(139.92,-146.645,1.55)); +#375382 = VECTOR('',#375383,1.); +#375383 = DIRECTION('',(0.,-1.,0.)); +#375384 = ORIENTED_EDGE('',*,*,#375385,.F.); +#375385 = EDGE_CURVE('',#375386,#375378,#375388,.T.); +#375386 = VERTEX_POINT('',#375387); +#375387 = CARTESIAN_POINT('',(139.92,-146.915,1.51)); +#375388 = LINE('',#375389,#375390); +#375389 = CARTESIAN_POINT('',(139.92,-146.915,1.51)); +#375390 = VECTOR('',#375391,1.); +#375391 = DIRECTION('',(0.,0.,1.)); +#375392 = ORIENTED_EDGE('',*,*,#375393,.F.); +#375393 = EDGE_CURVE('',#375354,#375386,#375394,.T.); +#375394 = LINE('',#375395,#375396); +#375395 = CARTESIAN_POINT('',(139.92,-146.645,1.51)); +#375396 = VECTOR('',#375397,1.); +#375397 = DIRECTION('',(0.,-1.,0.)); +#375398 = PLANE('',#375399); +#375399 = AXIS2_PLACEMENT_3D('',#375400,#375401,#375402); +#375400 = CARTESIAN_POINT('',(139.92,-146.645,1.51)); +#375401 = DIRECTION('',(1.,0.,-0.)); +#375402 = DIRECTION('',(0.,-1.,0.)); +#375403 = ADVANCED_FACE('',(#375404),#375431,.T.); +#375404 = FACE_BOUND('',#375405,.T.); +#375405 = EDGE_LOOP('',(#375406,#375407,#375416,#375424)); +#375406 = ORIENTED_EDGE('',*,*,#375385,.T.); +#375407 = ORIENTED_EDGE('',*,*,#375408,.T.); +#375408 = EDGE_CURVE('',#375378,#375409,#375411,.T.); +#375409 = VERTEX_POINT('',#375410); +#375410 = CARTESIAN_POINT('',(139.785,-147.05,1.55)); +#375411 = CIRCLE('',#375412,0.135001418495); +#375412 = AXIS2_PLACEMENT_3D('',#375413,#375414,#375415); +#375413 = CARTESIAN_POINT('',(139.78499858151,-146.9149985815,1.55)); +#375414 = DIRECTION('',(0.,0.,-1.)); +#375415 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#375416 = ORIENTED_EDGE('',*,*,#375417,.F.); +#375417 = EDGE_CURVE('',#375418,#375409,#375420,.T.); +#375418 = VERTEX_POINT('',#375419); +#375419 = CARTESIAN_POINT('',(139.785,-147.05,1.51)); +#375420 = LINE('',#375421,#375422); +#375421 = CARTESIAN_POINT('',(139.785,-147.05,1.51)); +#375422 = VECTOR('',#375423,1.); +#375423 = DIRECTION('',(0.,0.,1.)); +#375424 = ORIENTED_EDGE('',*,*,#375425,.F.); +#375425 = EDGE_CURVE('',#375386,#375418,#375426,.T.); +#375426 = CIRCLE('',#375427,0.135001418495); +#375427 = AXIS2_PLACEMENT_3D('',#375428,#375429,#375430); +#375428 = CARTESIAN_POINT('',(139.78499858151,-146.9149985815,1.51)); +#375429 = DIRECTION('',(0.,0.,-1.)); +#375430 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#375431 = CYLINDRICAL_SURFACE('',#375432,0.135001418495); +#375432 = AXIS2_PLACEMENT_3D('',#375433,#375434,#375435); +#375433 = CARTESIAN_POINT('',(139.78499858151,-146.9149985815,1.51)); +#375434 = DIRECTION('',(0.,0.,-1.)); +#375435 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#375436 = ADVANCED_FACE('',(#375437),#375462,.T.); +#375437 = FACE_BOUND('',#375438,.T.); +#375438 = EDGE_LOOP('',(#375439,#375440,#375448,#375456)); +#375439 = ORIENTED_EDGE('',*,*,#375417,.T.); +#375440 = ORIENTED_EDGE('',*,*,#375441,.T.); +#375441 = EDGE_CURVE('',#375409,#375442,#375444,.T.); +#375442 = VERTEX_POINT('',#375443); +#375443 = CARTESIAN_POINT('',(139.415,-147.05,1.55)); +#375444 = LINE('',#375445,#375446); +#375445 = CARTESIAN_POINT('',(139.785,-147.05,1.55)); +#375446 = VECTOR('',#375447,1.); +#375447 = DIRECTION('',(-1.,0.,0.)); +#375448 = ORIENTED_EDGE('',*,*,#375449,.F.); +#375449 = EDGE_CURVE('',#375450,#375442,#375452,.T.); +#375450 = VERTEX_POINT('',#375451); +#375451 = CARTESIAN_POINT('',(139.415,-147.05,1.51)); +#375452 = LINE('',#375453,#375454); +#375453 = CARTESIAN_POINT('',(139.415,-147.05,1.51)); +#375454 = VECTOR('',#375455,1.); +#375455 = DIRECTION('',(0.,0.,1.)); +#375456 = ORIENTED_EDGE('',*,*,#375457,.F.); +#375457 = EDGE_CURVE('',#375418,#375450,#375458,.T.); +#375458 = LINE('',#375459,#375460); +#375459 = CARTESIAN_POINT('',(139.785,-147.05,1.51)); +#375460 = VECTOR('',#375461,1.); +#375461 = DIRECTION('',(-1.,0.,0.)); +#375462 = PLANE('',#375463); +#375463 = AXIS2_PLACEMENT_3D('',#375464,#375465,#375466); +#375464 = CARTESIAN_POINT('',(139.785,-147.05,1.51)); +#375465 = DIRECTION('',(0.,-1.,0.)); +#375466 = DIRECTION('',(-1.,0.,0.)); +#375467 = ADVANCED_FACE('',(#375468),#375495,.T.); +#375468 = FACE_BOUND('',#375469,.T.); +#375469 = EDGE_LOOP('',(#375470,#375471,#375480,#375488)); +#375470 = ORIENTED_EDGE('',*,*,#375449,.T.); +#375471 = ORIENTED_EDGE('',*,*,#375472,.T.); +#375472 = EDGE_CURVE('',#375442,#375473,#375475,.T.); +#375473 = VERTEX_POINT('',#375474); +#375474 = CARTESIAN_POINT('',(139.28,-146.915,1.55)); +#375475 = CIRCLE('',#375476,0.135001418495); +#375476 = AXIS2_PLACEMENT_3D('',#375477,#375478,#375479); +#375477 = CARTESIAN_POINT('',(139.41500141848,-146.9149985815,1.55)); +#375478 = DIRECTION('',(0.,0.,-1.)); +#375479 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#375480 = ORIENTED_EDGE('',*,*,#375481,.F.); +#375481 = EDGE_CURVE('',#375482,#375473,#375484,.T.); +#375482 = VERTEX_POINT('',#375483); +#375483 = CARTESIAN_POINT('',(139.28,-146.915,1.51)); +#375484 = LINE('',#375485,#375486); +#375485 = CARTESIAN_POINT('',(139.28,-146.915,1.51)); +#375486 = VECTOR('',#375487,1.); +#375487 = DIRECTION('',(0.,0.,1.)); +#375488 = ORIENTED_EDGE('',*,*,#375489,.F.); +#375489 = EDGE_CURVE('',#375450,#375482,#375490,.T.); +#375490 = CIRCLE('',#375491,0.135001418495); +#375491 = AXIS2_PLACEMENT_3D('',#375492,#375493,#375494); +#375492 = CARTESIAN_POINT('',(139.41500141848,-146.9149985815,1.51)); +#375493 = DIRECTION('',(0.,0.,-1.)); +#375494 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#375495 = CYLINDRICAL_SURFACE('',#375496,0.135001418495); +#375496 = AXIS2_PLACEMENT_3D('',#375497,#375498,#375499); +#375497 = CARTESIAN_POINT('',(139.41500141848,-146.9149985815,1.51)); +#375498 = DIRECTION('',(0.,0.,-1.)); +#375499 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#375500 = ADVANCED_FACE('',(#375501),#375517,.T.); +#375501 = FACE_BOUND('',#375502,.T.); +#375502 = EDGE_LOOP('',(#375503,#375504,#375510,#375511)); +#375503 = ORIENTED_EDGE('',*,*,#375481,.T.); +#375504 = ORIENTED_EDGE('',*,*,#375505,.T.); +#375505 = EDGE_CURVE('',#375473,#375273,#375506,.T.); +#375506 = LINE('',#375507,#375508); +#375507 = CARTESIAN_POINT('',(139.28,-146.915,1.55)); +#375508 = VECTOR('',#375509,1.); +#375509 = DIRECTION('',(0.,1.,0.)); +#375510 = ORIENTED_EDGE('',*,*,#375270,.F.); +#375511 = ORIENTED_EDGE('',*,*,#375512,.F.); +#375512 = EDGE_CURVE('',#375482,#375271,#375513,.T.); +#375513 = LINE('',#375514,#375515); +#375514 = CARTESIAN_POINT('',(139.28,-146.915,1.51)); +#375515 = VECTOR('',#375516,1.); +#375516 = DIRECTION('',(0.,1.,0.)); +#375517 = PLANE('',#375518); +#375518 = AXIS2_PLACEMENT_3D('',#375519,#375520,#375521); +#375519 = CARTESIAN_POINT('',(139.28,-146.915,1.51)); +#375520 = DIRECTION('',(-1.,0.,0.)); +#375521 = DIRECTION('',(0.,1.,0.)); +#375522 = ADVANCED_FACE('',(#375523),#375533,.F.); +#375523 = FACE_BOUND('',#375524,.T.); +#375524 = EDGE_LOOP('',(#375525,#375526,#375527,#375528,#375529,#375530, + #375531,#375532)); +#375525 = ORIENTED_EDGE('',*,*,#375297,.T.); +#375526 = ORIENTED_EDGE('',*,*,#375329,.T.); +#375527 = ORIENTED_EDGE('',*,*,#375361,.T.); +#375528 = ORIENTED_EDGE('',*,*,#375393,.T.); +#375529 = ORIENTED_EDGE('',*,*,#375425,.T.); +#375530 = ORIENTED_EDGE('',*,*,#375457,.T.); +#375531 = ORIENTED_EDGE('',*,*,#375489,.T.); +#375532 = ORIENTED_EDGE('',*,*,#375512,.T.); +#375533 = PLANE('',#375534); +#375534 = AXIS2_PLACEMENT_3D('',#375535,#375536,#375537); +#375535 = CARTESIAN_POINT('',(0.,0.,1.51)); +#375536 = DIRECTION('',(0.,0.,1.)); +#375537 = DIRECTION('',(1.,0.,-0.)); +#375538 = ADVANCED_FACE('',(#375539),#375549,.T.); +#375539 = FACE_BOUND('',#375540,.F.); +#375540 = EDGE_LOOP('',(#375541,#375542,#375543,#375544,#375545,#375546, + #375547,#375548)); +#375541 = ORIENTED_EDGE('',*,*,#375280,.T.); +#375542 = ORIENTED_EDGE('',*,*,#375313,.T.); +#375543 = ORIENTED_EDGE('',*,*,#375344,.T.); +#375544 = ORIENTED_EDGE('',*,*,#375377,.T.); +#375545 = ORIENTED_EDGE('',*,*,#375408,.T.); +#375546 = ORIENTED_EDGE('',*,*,#375441,.T.); +#375547 = ORIENTED_EDGE('',*,*,#375472,.T.); +#375548 = ORIENTED_EDGE('',*,*,#375505,.T.); +#375549 = PLANE('',#375550); +#375550 = AXIS2_PLACEMENT_3D('',#375551,#375552,#375553); +#375551 = CARTESIAN_POINT('',(0.,0.,1.55)); +#375552 = DIRECTION('',(0.,0.,1.)); +#375553 = DIRECTION('',(1.,0.,-0.)); +#375554 = MANIFOLD_SOLID_BREP('',#375555); +#375555 = CLOSED_SHELL('',(#375556,#375598,#375629,#375662,#375693, + #375726,#375757,#375790,#375812,#375828)); +#375556 = ADVANCED_FACE('',(#375557),#375593,.T.); +#375557 = FACE_BOUND('',#375558,.T.); +#375558 = EDGE_LOOP('',(#375559,#375569,#375578,#375586)); +#375559 = ORIENTED_EDGE('',*,*,#375560,.T.); +#375560 = EDGE_CURVE('',#375561,#375563,#375565,.T.); +#375561 = VERTEX_POINT('',#375562); +#375562 = CARTESIAN_POINT('',(127.12,-66.23,1.51)); +#375563 = VERTEX_POINT('',#375564); +#375564 = CARTESIAN_POINT('',(127.12,-66.23,1.55)); +#375565 = LINE('',#375566,#375567); +#375566 = CARTESIAN_POINT('',(127.12,-66.23,1.51)); +#375567 = VECTOR('',#375568,1.); +#375568 = DIRECTION('',(0.,0.,1.)); +#375569 = ORIENTED_EDGE('',*,*,#375570,.T.); +#375570 = EDGE_CURVE('',#375563,#375571,#375573,.T.); +#375571 = VERTEX_POINT('',#375572); +#375572 = CARTESIAN_POINT('',(127.26,-66.09,1.55)); +#375573 = CIRCLE('',#375574,0.139999827125); +#375574 = AXIS2_PLACEMENT_3D('',#375575,#375576,#375577); +#375575 = CARTESIAN_POINT('',(127.25999982712,-66.22999982712,1.55)); +#375576 = DIRECTION('',(0.,0.,-1.)); +#375577 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#375578 = ORIENTED_EDGE('',*,*,#375579,.F.); +#375579 = EDGE_CURVE('',#375580,#375571,#375582,.T.); +#375580 = VERTEX_POINT('',#375581); +#375581 = CARTESIAN_POINT('',(127.26,-66.09,1.51)); +#375582 = LINE('',#375583,#375584); +#375583 = CARTESIAN_POINT('',(127.26,-66.09,1.51)); +#375584 = VECTOR('',#375585,1.); +#375585 = DIRECTION('',(0.,0.,1.)); +#375586 = ORIENTED_EDGE('',*,*,#375587,.F.); +#375587 = EDGE_CURVE('',#375561,#375580,#375588,.T.); +#375588 = CIRCLE('',#375589,0.139999827125); +#375589 = AXIS2_PLACEMENT_3D('',#375590,#375591,#375592); +#375590 = CARTESIAN_POINT('',(127.25999982712,-66.22999982712,1.51)); +#375591 = DIRECTION('',(0.,0.,-1.)); +#375592 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#375593 = CYLINDRICAL_SURFACE('',#375594,0.139999827125); +#375594 = AXIS2_PLACEMENT_3D('',#375595,#375596,#375597); +#375595 = CARTESIAN_POINT('',(127.25999982712,-66.22999982712,1.51)); +#375596 = DIRECTION('',(0.,0.,-1.)); +#375597 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#375598 = ADVANCED_FACE('',(#375599),#375624,.T.); +#375599 = FACE_BOUND('',#375600,.T.); +#375600 = EDGE_LOOP('',(#375601,#375602,#375610,#375618)); +#375601 = ORIENTED_EDGE('',*,*,#375579,.T.); +#375602 = ORIENTED_EDGE('',*,*,#375603,.T.); +#375603 = EDGE_CURVE('',#375571,#375604,#375606,.T.); +#375604 = VERTEX_POINT('',#375605); +#375605 = CARTESIAN_POINT('',(127.54,-66.09,1.55)); +#375606 = LINE('',#375607,#375608); +#375607 = CARTESIAN_POINT('',(127.26,-66.09,1.55)); +#375608 = VECTOR('',#375609,1.); +#375609 = DIRECTION('',(1.,0.,0.)); +#375610 = ORIENTED_EDGE('',*,*,#375611,.F.); +#375611 = EDGE_CURVE('',#375612,#375604,#375614,.T.); +#375612 = VERTEX_POINT('',#375613); +#375613 = CARTESIAN_POINT('',(127.54,-66.09,1.51)); +#375614 = LINE('',#375615,#375616); +#375615 = CARTESIAN_POINT('',(127.54,-66.09,1.51)); +#375616 = VECTOR('',#375617,1.); +#375617 = DIRECTION('',(0.,0.,1.)); +#375618 = ORIENTED_EDGE('',*,*,#375619,.F.); +#375619 = EDGE_CURVE('',#375580,#375612,#375620,.T.); +#375620 = LINE('',#375621,#375622); +#375621 = CARTESIAN_POINT('',(127.26,-66.09,1.51)); +#375622 = VECTOR('',#375623,1.); +#375623 = DIRECTION('',(1.,0.,0.)); +#375624 = PLANE('',#375625); +#375625 = AXIS2_PLACEMENT_3D('',#375626,#375627,#375628); +#375626 = CARTESIAN_POINT('',(127.26,-66.09,1.51)); +#375627 = DIRECTION('',(0.,1.,0.)); +#375628 = DIRECTION('',(1.,0.,0.)); +#375629 = ADVANCED_FACE('',(#375630),#375657,.T.); +#375630 = FACE_BOUND('',#375631,.T.); +#375631 = EDGE_LOOP('',(#375632,#375633,#375642,#375650)); +#375632 = ORIENTED_EDGE('',*,*,#375611,.T.); +#375633 = ORIENTED_EDGE('',*,*,#375634,.T.); +#375634 = EDGE_CURVE('',#375604,#375635,#375637,.T.); +#375635 = VERTEX_POINT('',#375636); +#375636 = CARTESIAN_POINT('',(127.68,-66.23,1.55)); +#375637 = CIRCLE('',#375638,0.139999827126); +#375638 = AXIS2_PLACEMENT_3D('',#375639,#375640,#375641); +#375639 = CARTESIAN_POINT('',(127.54000017287,-66.22999982712,1.55)); +#375640 = DIRECTION('',(0.,0.,-1.)); +#375641 = DIRECTION('',(-1.234820146735E-06,0.999999999999,0.)); +#375642 = ORIENTED_EDGE('',*,*,#375643,.F.); +#375643 = EDGE_CURVE('',#375644,#375635,#375646,.T.); +#375644 = VERTEX_POINT('',#375645); +#375645 = CARTESIAN_POINT('',(127.68,-66.23,1.51)); +#375646 = LINE('',#375647,#375648); +#375647 = CARTESIAN_POINT('',(127.68,-66.23,1.51)); +#375648 = VECTOR('',#375649,1.); +#375649 = DIRECTION('',(0.,0.,1.)); +#375650 = ORIENTED_EDGE('',*,*,#375651,.F.); +#375651 = EDGE_CURVE('',#375612,#375644,#375652,.T.); +#375652 = CIRCLE('',#375653,0.139999827126); +#375653 = AXIS2_PLACEMENT_3D('',#375654,#375655,#375656); +#375654 = CARTESIAN_POINT('',(127.54000017287,-66.22999982712,1.51)); +#375655 = DIRECTION('',(0.,0.,-1.)); +#375656 = DIRECTION('',(-1.234820146735E-06,0.999999999999,0.)); +#375657 = CYLINDRICAL_SURFACE('',#375658,0.139999827126); +#375658 = AXIS2_PLACEMENT_3D('',#375659,#375660,#375661); +#375659 = CARTESIAN_POINT('',(127.54000017287,-66.22999982712,1.51)); +#375660 = DIRECTION('',(0.,0.,-1.)); +#375661 = DIRECTION('',(-1.234820146735E-06,0.999999999999,0.)); +#375662 = ADVANCED_FACE('',(#375663),#375688,.T.); +#375663 = FACE_BOUND('',#375664,.T.); +#375664 = EDGE_LOOP('',(#375665,#375666,#375674,#375682)); +#375665 = ORIENTED_EDGE('',*,*,#375643,.T.); +#375666 = ORIENTED_EDGE('',*,*,#375667,.T.); +#375667 = EDGE_CURVE('',#375635,#375668,#375670,.T.); +#375668 = VERTEX_POINT('',#375669); +#375669 = CARTESIAN_POINT('',(127.68,-66.57,1.55)); +#375670 = LINE('',#375671,#375672); +#375671 = CARTESIAN_POINT('',(127.68,-66.23,1.55)); +#375672 = VECTOR('',#375673,1.); +#375673 = DIRECTION('',(0.,-1.,0.)); +#375674 = ORIENTED_EDGE('',*,*,#375675,.F.); +#375675 = EDGE_CURVE('',#375676,#375668,#375678,.T.); +#375676 = VERTEX_POINT('',#375677); +#375677 = CARTESIAN_POINT('',(127.68,-66.57,1.51)); +#375678 = LINE('',#375679,#375680); +#375679 = CARTESIAN_POINT('',(127.68,-66.57,1.51)); +#375680 = VECTOR('',#375681,1.); +#375681 = DIRECTION('',(0.,0.,1.)); +#375682 = ORIENTED_EDGE('',*,*,#375683,.F.); +#375683 = EDGE_CURVE('',#375644,#375676,#375684,.T.); +#375684 = LINE('',#375685,#375686); +#375685 = CARTESIAN_POINT('',(127.68,-66.23,1.51)); +#375686 = VECTOR('',#375687,1.); +#375687 = DIRECTION('',(0.,-1.,0.)); +#375688 = PLANE('',#375689); +#375689 = AXIS2_PLACEMENT_3D('',#375690,#375691,#375692); +#375690 = CARTESIAN_POINT('',(127.68,-66.23,1.51)); +#375691 = DIRECTION('',(1.,0.,-0.)); +#375692 = DIRECTION('',(0.,-1.,0.)); +#375693 = ADVANCED_FACE('',(#375694),#375721,.T.); +#375694 = FACE_BOUND('',#375695,.T.); +#375695 = EDGE_LOOP('',(#375696,#375697,#375706,#375714)); +#375696 = ORIENTED_EDGE('',*,*,#375675,.T.); +#375697 = ORIENTED_EDGE('',*,*,#375698,.T.); +#375698 = EDGE_CURVE('',#375668,#375699,#375701,.T.); +#375699 = VERTEX_POINT('',#375700); +#375700 = CARTESIAN_POINT('',(127.54,-66.71,1.55)); +#375701 = CIRCLE('',#375702,0.139999827126); +#375702 = AXIS2_PLACEMENT_3D('',#375703,#375704,#375705); +#375703 = CARTESIAN_POINT('',(127.54000017287,-66.57000017287,1.55)); +#375704 = DIRECTION('',(0.,0.,-1.)); +#375705 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#375706 = ORIENTED_EDGE('',*,*,#375707,.F.); +#375707 = EDGE_CURVE('',#375708,#375699,#375710,.T.); +#375708 = VERTEX_POINT('',#375709); +#375709 = CARTESIAN_POINT('',(127.54,-66.71,1.51)); +#375710 = LINE('',#375711,#375712); +#375711 = CARTESIAN_POINT('',(127.54,-66.71,1.51)); +#375712 = VECTOR('',#375713,1.); +#375713 = DIRECTION('',(0.,0.,1.)); +#375714 = ORIENTED_EDGE('',*,*,#375715,.F.); +#375715 = EDGE_CURVE('',#375676,#375708,#375716,.T.); +#375716 = CIRCLE('',#375717,0.139999827126); +#375717 = AXIS2_PLACEMENT_3D('',#375718,#375719,#375720); +#375718 = CARTESIAN_POINT('',(127.54000017287,-66.57000017287,1.51)); +#375719 = DIRECTION('',(0.,0.,-1.)); +#375720 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#375721 = CYLINDRICAL_SURFACE('',#375722,0.139999827126); +#375722 = AXIS2_PLACEMENT_3D('',#375723,#375724,#375725); +#375723 = CARTESIAN_POINT('',(127.54000017287,-66.57000017287,1.51)); +#375724 = DIRECTION('',(0.,0.,-1.)); +#375725 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#375726 = ADVANCED_FACE('',(#375727),#375752,.T.); +#375727 = FACE_BOUND('',#375728,.T.); +#375728 = EDGE_LOOP('',(#375729,#375730,#375738,#375746)); +#375729 = ORIENTED_EDGE('',*,*,#375707,.T.); +#375730 = ORIENTED_EDGE('',*,*,#375731,.T.); +#375731 = EDGE_CURVE('',#375699,#375732,#375734,.T.); +#375732 = VERTEX_POINT('',#375733); +#375733 = CARTESIAN_POINT('',(127.26,-66.71,1.55)); +#375734 = LINE('',#375735,#375736); +#375735 = CARTESIAN_POINT('',(127.54,-66.71,1.55)); +#375736 = VECTOR('',#375737,1.); +#375737 = DIRECTION('',(-1.,0.,0.)); +#375738 = ORIENTED_EDGE('',*,*,#375739,.F.); +#375739 = EDGE_CURVE('',#375740,#375732,#375742,.T.); +#375740 = VERTEX_POINT('',#375741); +#375741 = CARTESIAN_POINT('',(127.26,-66.71,1.51)); +#375742 = LINE('',#375743,#375744); +#375743 = CARTESIAN_POINT('',(127.26,-66.71,1.51)); +#375744 = VECTOR('',#375745,1.); +#375745 = DIRECTION('',(0.,0.,1.)); +#375746 = ORIENTED_EDGE('',*,*,#375747,.F.); +#375747 = EDGE_CURVE('',#375708,#375740,#375748,.T.); +#375748 = LINE('',#375749,#375750); +#375749 = CARTESIAN_POINT('',(127.54,-66.71,1.51)); +#375750 = VECTOR('',#375751,1.); +#375751 = DIRECTION('',(-1.,0.,0.)); +#375752 = PLANE('',#375753); +#375753 = AXIS2_PLACEMENT_3D('',#375754,#375755,#375756); +#375754 = CARTESIAN_POINT('',(127.54,-66.71,1.51)); +#375755 = DIRECTION('',(0.,-1.,0.)); +#375756 = DIRECTION('',(-1.,0.,0.)); +#375757 = ADVANCED_FACE('',(#375758),#375785,.T.); +#375758 = FACE_BOUND('',#375759,.T.); +#375759 = EDGE_LOOP('',(#375760,#375761,#375770,#375778)); +#375760 = ORIENTED_EDGE('',*,*,#375739,.T.); +#375761 = ORIENTED_EDGE('',*,*,#375762,.T.); +#375762 = EDGE_CURVE('',#375732,#375763,#375765,.T.); +#375763 = VERTEX_POINT('',#375764); +#375764 = CARTESIAN_POINT('',(127.12,-66.57,1.55)); +#375765 = CIRCLE('',#375766,0.139999827125); +#375766 = AXIS2_PLACEMENT_3D('',#375767,#375768,#375769); +#375767 = CARTESIAN_POINT('',(127.25999982712,-66.57000017287,1.55)); +#375768 = DIRECTION('',(0.,0.,-1.)); +#375769 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#375770 = ORIENTED_EDGE('',*,*,#375771,.F.); +#375771 = EDGE_CURVE('',#375772,#375763,#375774,.T.); +#375772 = VERTEX_POINT('',#375773); +#375773 = CARTESIAN_POINT('',(127.12,-66.57,1.51)); +#375774 = LINE('',#375775,#375776); +#375775 = CARTESIAN_POINT('',(127.12,-66.57,1.51)); +#375776 = VECTOR('',#375777,1.); +#375777 = DIRECTION('',(0.,0.,1.)); +#375778 = ORIENTED_EDGE('',*,*,#375779,.F.); +#375779 = EDGE_CURVE('',#375740,#375772,#375780,.T.); +#375780 = CIRCLE('',#375781,0.139999827125); +#375781 = AXIS2_PLACEMENT_3D('',#375782,#375783,#375784); +#375782 = CARTESIAN_POINT('',(127.25999982712,-66.57000017287,1.51)); +#375783 = DIRECTION('',(0.,0.,-1.)); +#375784 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#375785 = CYLINDRICAL_SURFACE('',#375786,0.139999827125); +#375786 = AXIS2_PLACEMENT_3D('',#375787,#375788,#375789); +#375787 = CARTESIAN_POINT('',(127.25999982712,-66.57000017287,1.51)); +#375788 = DIRECTION('',(0.,0.,-1.)); +#375789 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#375790 = ADVANCED_FACE('',(#375791),#375807,.T.); +#375791 = FACE_BOUND('',#375792,.T.); +#375792 = EDGE_LOOP('',(#375793,#375794,#375800,#375801)); +#375793 = ORIENTED_EDGE('',*,*,#375771,.T.); +#375794 = ORIENTED_EDGE('',*,*,#375795,.T.); +#375795 = EDGE_CURVE('',#375763,#375563,#375796,.T.); +#375796 = LINE('',#375797,#375798); +#375797 = CARTESIAN_POINT('',(127.12,-66.57,1.55)); +#375798 = VECTOR('',#375799,1.); +#375799 = DIRECTION('',(0.,1.,0.)); +#375800 = ORIENTED_EDGE('',*,*,#375560,.F.); +#375801 = ORIENTED_EDGE('',*,*,#375802,.F.); +#375802 = EDGE_CURVE('',#375772,#375561,#375803,.T.); +#375803 = LINE('',#375804,#375805); +#375804 = CARTESIAN_POINT('',(127.12,-66.57,1.51)); +#375805 = VECTOR('',#375806,1.); +#375806 = DIRECTION('',(0.,1.,0.)); +#375807 = PLANE('',#375808); +#375808 = AXIS2_PLACEMENT_3D('',#375809,#375810,#375811); +#375809 = CARTESIAN_POINT('',(127.12,-66.57,1.51)); +#375810 = DIRECTION('',(-1.,0.,0.)); +#375811 = DIRECTION('',(0.,1.,0.)); +#375812 = ADVANCED_FACE('',(#375813),#375823,.F.); +#375813 = FACE_BOUND('',#375814,.T.); +#375814 = EDGE_LOOP('',(#375815,#375816,#375817,#375818,#375819,#375820, + #375821,#375822)); +#375815 = ORIENTED_EDGE('',*,*,#375587,.T.); +#375816 = ORIENTED_EDGE('',*,*,#375619,.T.); +#375817 = ORIENTED_EDGE('',*,*,#375651,.T.); +#375818 = ORIENTED_EDGE('',*,*,#375683,.T.); +#375819 = ORIENTED_EDGE('',*,*,#375715,.T.); +#375820 = ORIENTED_EDGE('',*,*,#375747,.T.); +#375821 = ORIENTED_EDGE('',*,*,#375779,.T.); +#375822 = ORIENTED_EDGE('',*,*,#375802,.T.); +#375823 = PLANE('',#375824); +#375824 = AXIS2_PLACEMENT_3D('',#375825,#375826,#375827); +#375825 = CARTESIAN_POINT('',(0.,0.,1.51)); +#375826 = DIRECTION('',(0.,0.,1.)); +#375827 = DIRECTION('',(1.,0.,-0.)); +#375828 = ADVANCED_FACE('',(#375829),#375839,.T.); +#375829 = FACE_BOUND('',#375830,.F.); +#375830 = EDGE_LOOP('',(#375831,#375832,#375833,#375834,#375835,#375836, + #375837,#375838)); +#375831 = ORIENTED_EDGE('',*,*,#375570,.T.); +#375832 = ORIENTED_EDGE('',*,*,#375603,.T.); +#375833 = ORIENTED_EDGE('',*,*,#375634,.T.); +#375834 = ORIENTED_EDGE('',*,*,#375667,.T.); +#375835 = ORIENTED_EDGE('',*,*,#375698,.T.); +#375836 = ORIENTED_EDGE('',*,*,#375731,.T.); +#375837 = ORIENTED_EDGE('',*,*,#375762,.T.); +#375838 = ORIENTED_EDGE('',*,*,#375795,.T.); +#375839 = PLANE('',#375840); +#375840 = AXIS2_PLACEMENT_3D('',#375841,#375842,#375843); +#375841 = CARTESIAN_POINT('',(0.,0.,1.55)); +#375842 = DIRECTION('',(0.,0.,1.)); +#375843 = DIRECTION('',(1.,0.,-0.)); +#375844 = MANIFOLD_SOLID_BREP('',#375845); +#375845 = CLOSED_SHELL('',(#375846,#375888,#375919,#375952,#375983, + #376016,#376047,#376080,#376102,#376118)); +#375846 = ADVANCED_FACE('',(#375847),#375883,.T.); +#375847 = FACE_BOUND('',#375848,.T.); +#375848 = EDGE_LOOP('',(#375849,#375859,#375868,#375876)); +#375849 = ORIENTED_EDGE('',*,*,#375850,.T.); +#375850 = EDGE_CURVE('',#375851,#375853,#375855,.T.); +#375851 = VERTEX_POINT('',#375852); +#375852 = CARTESIAN_POINT('',(148.18,-83.115,1.51)); +#375853 = VERTEX_POINT('',#375854); +#375854 = CARTESIAN_POINT('',(148.18,-83.115,1.55)); +#375855 = LINE('',#375856,#375857); +#375856 = CARTESIAN_POINT('',(148.18,-83.115,1.51)); +#375857 = VECTOR('',#375858,1.); +#375858 = DIRECTION('',(0.,0.,1.)); +#375859 = ORIENTED_EDGE('',*,*,#375860,.T.); +#375860 = EDGE_CURVE('',#375853,#375861,#375863,.T.); +#375861 = VERTEX_POINT('',#375862); +#375862 = CARTESIAN_POINT('',(148.315,-82.98,1.55)); +#375863 = CIRCLE('',#375864,0.135001418495); +#375864 = AXIS2_PLACEMENT_3D('',#375865,#375866,#375867); +#375865 = CARTESIAN_POINT('',(148.31500141848,-83.11500141848,1.55)); +#375866 = DIRECTION('',(0.,0.,-1.)); +#375867 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#375868 = ORIENTED_EDGE('',*,*,#375869,.F.); +#375869 = EDGE_CURVE('',#375870,#375861,#375872,.T.); +#375870 = VERTEX_POINT('',#375871); +#375871 = CARTESIAN_POINT('',(148.315,-82.98,1.51)); +#375872 = LINE('',#375873,#375874); +#375873 = CARTESIAN_POINT('',(148.315,-82.98,1.51)); +#375874 = VECTOR('',#375875,1.); +#375875 = DIRECTION('',(0.,0.,1.)); +#375876 = ORIENTED_EDGE('',*,*,#375877,.F.); +#375877 = EDGE_CURVE('',#375851,#375870,#375878,.T.); +#375878 = CIRCLE('',#375879,0.135001418495); +#375879 = AXIS2_PLACEMENT_3D('',#375880,#375881,#375882); +#375880 = CARTESIAN_POINT('',(148.31500141848,-83.11500141848,1.51)); +#375881 = DIRECTION('',(0.,0.,-1.)); +#375882 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#375883 = CYLINDRICAL_SURFACE('',#375884,0.135001418495); +#375884 = AXIS2_PLACEMENT_3D('',#375885,#375886,#375887); +#375885 = CARTESIAN_POINT('',(148.31500141848,-83.11500141848,1.51)); +#375886 = DIRECTION('',(0.,0.,-1.)); +#375887 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#375888 = ADVANCED_FACE('',(#375889),#375914,.T.); +#375889 = FACE_BOUND('',#375890,.T.); +#375890 = EDGE_LOOP('',(#375891,#375892,#375900,#375908)); +#375891 = ORIENTED_EDGE('',*,*,#375869,.T.); +#375892 = ORIENTED_EDGE('',*,*,#375893,.T.); +#375893 = EDGE_CURVE('',#375861,#375894,#375896,.T.); +#375894 = VERTEX_POINT('',#375895); +#375895 = CARTESIAN_POINT('',(148.685,-82.98,1.55)); +#375896 = LINE('',#375897,#375898); +#375897 = CARTESIAN_POINT('',(148.315,-82.98,1.55)); +#375898 = VECTOR('',#375899,1.); +#375899 = DIRECTION('',(1.,0.,0.)); +#375900 = ORIENTED_EDGE('',*,*,#375901,.F.); +#375901 = EDGE_CURVE('',#375902,#375894,#375904,.T.); +#375902 = VERTEX_POINT('',#375903); +#375903 = CARTESIAN_POINT('',(148.685,-82.98,1.51)); +#375904 = LINE('',#375905,#375906); +#375905 = CARTESIAN_POINT('',(148.685,-82.98,1.51)); +#375906 = VECTOR('',#375907,1.); +#375907 = DIRECTION('',(0.,0.,1.)); +#375908 = ORIENTED_EDGE('',*,*,#375909,.F.); +#375909 = EDGE_CURVE('',#375870,#375902,#375910,.T.); +#375910 = LINE('',#375911,#375912); +#375911 = CARTESIAN_POINT('',(148.315,-82.98,1.51)); +#375912 = VECTOR('',#375913,1.); +#375913 = DIRECTION('',(1.,0.,0.)); +#375914 = PLANE('',#375915); +#375915 = AXIS2_PLACEMENT_3D('',#375916,#375917,#375918); +#375916 = CARTESIAN_POINT('',(148.315,-82.98,1.51)); +#375917 = DIRECTION('',(0.,1.,0.)); +#375918 = DIRECTION('',(1.,0.,0.)); +#375919 = ADVANCED_FACE('',(#375920),#375947,.T.); +#375920 = FACE_BOUND('',#375921,.T.); +#375921 = EDGE_LOOP('',(#375922,#375923,#375932,#375940)); +#375922 = ORIENTED_EDGE('',*,*,#375901,.T.); +#375923 = ORIENTED_EDGE('',*,*,#375924,.T.); +#375924 = EDGE_CURVE('',#375894,#375925,#375927,.T.); +#375925 = VERTEX_POINT('',#375926); +#375926 = CARTESIAN_POINT('',(148.82,-83.115,1.55)); +#375927 = CIRCLE('',#375928,0.135001418495); +#375928 = AXIS2_PLACEMENT_3D('',#375929,#375930,#375931); +#375929 = CARTESIAN_POINT('',(148.68499858151,-83.11500141848,1.55)); +#375930 = DIRECTION('',(0.,0.,-1.)); +#375931 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#375932 = ORIENTED_EDGE('',*,*,#375933,.F.); +#375933 = EDGE_CURVE('',#375934,#375925,#375936,.T.); +#375934 = VERTEX_POINT('',#375935); +#375935 = CARTESIAN_POINT('',(148.82,-83.115,1.51)); +#375936 = LINE('',#375937,#375938); +#375937 = CARTESIAN_POINT('',(148.82,-83.115,1.51)); +#375938 = VECTOR('',#375939,1.); +#375939 = DIRECTION('',(0.,0.,1.)); +#375940 = ORIENTED_EDGE('',*,*,#375941,.F.); +#375941 = EDGE_CURVE('',#375902,#375934,#375942,.T.); +#375942 = CIRCLE('',#375943,0.135001418495); +#375943 = AXIS2_PLACEMENT_3D('',#375944,#375945,#375946); +#375944 = CARTESIAN_POINT('',(148.68499858151,-83.11500141848,1.51)); +#375945 = DIRECTION('',(0.,0.,-1.)); +#375946 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#375947 = CYLINDRICAL_SURFACE('',#375948,0.135001418495); +#375948 = AXIS2_PLACEMENT_3D('',#375949,#375950,#375951); +#375949 = CARTESIAN_POINT('',(148.68499858151,-83.11500141848,1.51)); +#375950 = DIRECTION('',(0.,0.,-1.)); +#375951 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#375952 = ADVANCED_FACE('',(#375953),#375978,.T.); +#375953 = FACE_BOUND('',#375954,.T.); +#375954 = EDGE_LOOP('',(#375955,#375956,#375964,#375972)); +#375955 = ORIENTED_EDGE('',*,*,#375933,.T.); +#375956 = ORIENTED_EDGE('',*,*,#375957,.T.); +#375957 = EDGE_CURVE('',#375925,#375958,#375960,.T.); +#375958 = VERTEX_POINT('',#375959); +#375959 = CARTESIAN_POINT('',(148.82,-83.385,1.55)); +#375960 = LINE('',#375961,#375962); +#375961 = CARTESIAN_POINT('',(148.82,-83.115,1.55)); +#375962 = VECTOR('',#375963,1.); +#375963 = DIRECTION('',(0.,-1.,0.)); +#375964 = ORIENTED_EDGE('',*,*,#375965,.F.); +#375965 = EDGE_CURVE('',#375966,#375958,#375968,.T.); +#375966 = VERTEX_POINT('',#375967); +#375967 = CARTESIAN_POINT('',(148.82,-83.385,1.51)); +#375968 = LINE('',#375969,#375970); +#375969 = CARTESIAN_POINT('',(148.82,-83.385,1.51)); +#375970 = VECTOR('',#375971,1.); +#375971 = DIRECTION('',(0.,0.,1.)); +#375972 = ORIENTED_EDGE('',*,*,#375973,.F.); +#375973 = EDGE_CURVE('',#375934,#375966,#375974,.T.); +#375974 = LINE('',#375975,#375976); +#375975 = CARTESIAN_POINT('',(148.82,-83.115,1.51)); +#375976 = VECTOR('',#375977,1.); +#375977 = DIRECTION('',(0.,-1.,0.)); +#375978 = PLANE('',#375979); +#375979 = AXIS2_PLACEMENT_3D('',#375980,#375981,#375982); +#375980 = CARTESIAN_POINT('',(148.82,-83.115,1.51)); +#375981 = DIRECTION('',(1.,0.,-0.)); +#375982 = DIRECTION('',(0.,-1.,0.)); +#375983 = ADVANCED_FACE('',(#375984),#376011,.T.); +#375984 = FACE_BOUND('',#375985,.T.); +#375985 = EDGE_LOOP('',(#375986,#375987,#375996,#376004)); +#375986 = ORIENTED_EDGE('',*,*,#375965,.T.); +#375987 = ORIENTED_EDGE('',*,*,#375988,.T.); +#375988 = EDGE_CURVE('',#375958,#375989,#375991,.T.); +#375989 = VERTEX_POINT('',#375990); +#375990 = CARTESIAN_POINT('',(148.685,-83.52,1.55)); +#375991 = CIRCLE('',#375992,0.135001418495); +#375992 = AXIS2_PLACEMENT_3D('',#375993,#375994,#375995); +#375993 = CARTESIAN_POINT('',(148.68499858151,-83.38499858151,1.55)); +#375994 = DIRECTION('',(0.,0.,-1.)); +#375995 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#375996 = ORIENTED_EDGE('',*,*,#375997,.F.); +#375997 = EDGE_CURVE('',#375998,#375989,#376000,.T.); +#375998 = VERTEX_POINT('',#375999); +#375999 = CARTESIAN_POINT('',(148.685,-83.52,1.51)); +#376000 = LINE('',#376001,#376002); +#376001 = CARTESIAN_POINT('',(148.685,-83.52,1.51)); +#376002 = VECTOR('',#376003,1.); +#376003 = DIRECTION('',(0.,0.,1.)); +#376004 = ORIENTED_EDGE('',*,*,#376005,.F.); +#376005 = EDGE_CURVE('',#375966,#375998,#376006,.T.); +#376006 = CIRCLE('',#376007,0.135001418495); +#376007 = AXIS2_PLACEMENT_3D('',#376008,#376009,#376010); +#376008 = CARTESIAN_POINT('',(148.68499858151,-83.38499858151,1.51)); +#376009 = DIRECTION('',(0.,0.,-1.)); +#376010 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#376011 = CYLINDRICAL_SURFACE('',#376012,0.135001418495); +#376012 = AXIS2_PLACEMENT_3D('',#376013,#376014,#376015); +#376013 = CARTESIAN_POINT('',(148.68499858151,-83.38499858151,1.51)); +#376014 = DIRECTION('',(0.,0.,-1.)); +#376015 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#376016 = ADVANCED_FACE('',(#376017),#376042,.T.); +#376017 = FACE_BOUND('',#376018,.T.); +#376018 = EDGE_LOOP('',(#376019,#376020,#376028,#376036)); +#376019 = ORIENTED_EDGE('',*,*,#375997,.T.); +#376020 = ORIENTED_EDGE('',*,*,#376021,.T.); +#376021 = EDGE_CURVE('',#375989,#376022,#376024,.T.); +#376022 = VERTEX_POINT('',#376023); +#376023 = CARTESIAN_POINT('',(148.315,-83.52,1.55)); +#376024 = LINE('',#376025,#376026); +#376025 = CARTESIAN_POINT('',(148.685,-83.52,1.55)); +#376026 = VECTOR('',#376027,1.); +#376027 = DIRECTION('',(-1.,0.,0.)); +#376028 = ORIENTED_EDGE('',*,*,#376029,.F.); +#376029 = EDGE_CURVE('',#376030,#376022,#376032,.T.); +#376030 = VERTEX_POINT('',#376031); +#376031 = CARTESIAN_POINT('',(148.315,-83.52,1.51)); +#376032 = LINE('',#376033,#376034); +#376033 = CARTESIAN_POINT('',(148.315,-83.52,1.51)); +#376034 = VECTOR('',#376035,1.); +#376035 = DIRECTION('',(0.,0.,1.)); +#376036 = ORIENTED_EDGE('',*,*,#376037,.F.); +#376037 = EDGE_CURVE('',#375998,#376030,#376038,.T.); +#376038 = LINE('',#376039,#376040); +#376039 = CARTESIAN_POINT('',(148.685,-83.52,1.51)); +#376040 = VECTOR('',#376041,1.); +#376041 = DIRECTION('',(-1.,0.,0.)); +#376042 = PLANE('',#376043); +#376043 = AXIS2_PLACEMENT_3D('',#376044,#376045,#376046); +#376044 = CARTESIAN_POINT('',(148.685,-83.52,1.51)); +#376045 = DIRECTION('',(0.,-1.,0.)); +#376046 = DIRECTION('',(-1.,0.,0.)); +#376047 = ADVANCED_FACE('',(#376048),#376075,.T.); +#376048 = FACE_BOUND('',#376049,.T.); +#376049 = EDGE_LOOP('',(#376050,#376051,#376060,#376068)); +#376050 = ORIENTED_EDGE('',*,*,#376029,.T.); +#376051 = ORIENTED_EDGE('',*,*,#376052,.T.); +#376052 = EDGE_CURVE('',#376022,#376053,#376055,.T.); +#376053 = VERTEX_POINT('',#376054); +#376054 = CARTESIAN_POINT('',(148.18,-83.385,1.55)); +#376055 = CIRCLE('',#376056,0.135001418495); +#376056 = AXIS2_PLACEMENT_3D('',#376057,#376058,#376059); +#376057 = CARTESIAN_POINT('',(148.31500141848,-83.38499858151,1.55)); +#376058 = DIRECTION('',(0.,0.,-1.)); +#376059 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#376060 = ORIENTED_EDGE('',*,*,#376061,.F.); +#376061 = EDGE_CURVE('',#376062,#376053,#376064,.T.); +#376062 = VERTEX_POINT('',#376063); +#376063 = CARTESIAN_POINT('',(148.18,-83.385,1.51)); +#376064 = LINE('',#376065,#376066); +#376065 = CARTESIAN_POINT('',(148.18,-83.385,1.51)); +#376066 = VECTOR('',#376067,1.); +#376067 = DIRECTION('',(0.,0.,1.)); +#376068 = ORIENTED_EDGE('',*,*,#376069,.F.); +#376069 = EDGE_CURVE('',#376030,#376062,#376070,.T.); +#376070 = CIRCLE('',#376071,0.135001418495); +#376071 = AXIS2_PLACEMENT_3D('',#376072,#376073,#376074); +#376072 = CARTESIAN_POINT('',(148.31500141848,-83.38499858151,1.51)); +#376073 = DIRECTION('',(0.,0.,-1.)); +#376074 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#376075 = CYLINDRICAL_SURFACE('',#376076,0.135001418495); +#376076 = AXIS2_PLACEMENT_3D('',#376077,#376078,#376079); +#376077 = CARTESIAN_POINT('',(148.31500141848,-83.38499858151,1.51)); +#376078 = DIRECTION('',(0.,0.,-1.)); +#376079 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#376080 = ADVANCED_FACE('',(#376081),#376097,.T.); +#376081 = FACE_BOUND('',#376082,.T.); +#376082 = EDGE_LOOP('',(#376083,#376084,#376090,#376091)); +#376083 = ORIENTED_EDGE('',*,*,#376061,.T.); +#376084 = ORIENTED_EDGE('',*,*,#376085,.T.); +#376085 = EDGE_CURVE('',#376053,#375853,#376086,.T.); +#376086 = LINE('',#376087,#376088); +#376087 = CARTESIAN_POINT('',(148.18,-83.385,1.55)); +#376088 = VECTOR('',#376089,1.); +#376089 = DIRECTION('',(0.,1.,0.)); +#376090 = ORIENTED_EDGE('',*,*,#375850,.F.); +#376091 = ORIENTED_EDGE('',*,*,#376092,.F.); +#376092 = EDGE_CURVE('',#376062,#375851,#376093,.T.); +#376093 = LINE('',#376094,#376095); +#376094 = CARTESIAN_POINT('',(148.18,-83.385,1.51)); +#376095 = VECTOR('',#376096,1.); +#376096 = DIRECTION('',(0.,1.,0.)); +#376097 = PLANE('',#376098); +#376098 = AXIS2_PLACEMENT_3D('',#376099,#376100,#376101); +#376099 = CARTESIAN_POINT('',(148.18,-83.385,1.51)); +#376100 = DIRECTION('',(-1.,0.,0.)); +#376101 = DIRECTION('',(0.,1.,0.)); +#376102 = ADVANCED_FACE('',(#376103),#376113,.F.); +#376103 = FACE_BOUND('',#376104,.T.); +#376104 = EDGE_LOOP('',(#376105,#376106,#376107,#376108,#376109,#376110, + #376111,#376112)); +#376105 = ORIENTED_EDGE('',*,*,#375877,.T.); +#376106 = ORIENTED_EDGE('',*,*,#375909,.T.); +#376107 = ORIENTED_EDGE('',*,*,#375941,.T.); +#376108 = ORIENTED_EDGE('',*,*,#375973,.T.); +#376109 = ORIENTED_EDGE('',*,*,#376005,.T.); +#376110 = ORIENTED_EDGE('',*,*,#376037,.T.); +#376111 = ORIENTED_EDGE('',*,*,#376069,.T.); +#376112 = ORIENTED_EDGE('',*,*,#376092,.T.); +#376113 = PLANE('',#376114); +#376114 = AXIS2_PLACEMENT_3D('',#376115,#376116,#376117); +#376115 = CARTESIAN_POINT('',(0.,0.,1.51)); +#376116 = DIRECTION('',(0.,0.,1.)); +#376117 = DIRECTION('',(1.,0.,-0.)); +#376118 = ADVANCED_FACE('',(#376119),#376129,.T.); +#376119 = FACE_BOUND('',#376120,.F.); +#376120 = EDGE_LOOP('',(#376121,#376122,#376123,#376124,#376125,#376126, + #376127,#376128)); +#376121 = ORIENTED_EDGE('',*,*,#375860,.T.); +#376122 = ORIENTED_EDGE('',*,*,#375893,.T.); +#376123 = ORIENTED_EDGE('',*,*,#375924,.T.); +#376124 = ORIENTED_EDGE('',*,*,#375957,.T.); +#376125 = ORIENTED_EDGE('',*,*,#375988,.T.); +#376126 = ORIENTED_EDGE('',*,*,#376021,.T.); +#376127 = ORIENTED_EDGE('',*,*,#376052,.T.); +#376128 = ORIENTED_EDGE('',*,*,#376085,.T.); +#376129 = PLANE('',#376130); +#376130 = AXIS2_PLACEMENT_3D('',#376131,#376132,#376133); +#376131 = CARTESIAN_POINT('',(0.,0.,1.55)); +#376132 = DIRECTION('',(0.,0.,1.)); +#376133 = DIRECTION('',(1.,0.,-0.)); +#376134 = MANIFOLD_SOLID_BREP('',#376135); +#376135 = CLOSED_SHELL('',(#376136,#376178,#376209,#376242,#376273, + #376306,#376337,#376370,#376392,#376408)); +#376136 = ADVANCED_FACE('',(#376137),#376173,.T.); +#376137 = FACE_BOUND('',#376138,.F.); +#376138 = EDGE_LOOP('',(#376139,#376149,#376158,#376166)); +#376139 = ORIENTED_EDGE('',*,*,#376140,.T.); +#376140 = EDGE_CURVE('',#376141,#376143,#376145,.T.); +#376141 = VERTEX_POINT('',#376142); +#376142 = CARTESIAN_POINT('',(148.9,-133.515,0.)); +#376143 = VERTEX_POINT('',#376144); +#376144 = CARTESIAN_POINT('',(148.9,-133.515,-4.E-02)); +#376145 = LINE('',#376146,#376147); +#376146 = CARTESIAN_POINT('',(148.9,-133.515,0.)); +#376147 = VECTOR('',#376148,1.); +#376148 = DIRECTION('',(0.,0.,-1.)); +#376149 = ORIENTED_EDGE('',*,*,#376150,.T.); +#376150 = EDGE_CURVE('',#376143,#376151,#376153,.T.); +#376151 = VERTEX_POINT('',#376152); +#376152 = CARTESIAN_POINT('',(149.035,-133.38,-4.E-02)); +#376153 = CIRCLE('',#376154,0.135001418495); +#376154 = AXIS2_PLACEMENT_3D('',#376155,#376156,#376157); +#376155 = CARTESIAN_POINT('',(149.03500141848,-133.5150014184,-4.E-02)); +#376156 = DIRECTION('',(0.,0.,-1.)); +#376157 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#376158 = ORIENTED_EDGE('',*,*,#376159,.F.); +#376159 = EDGE_CURVE('',#376160,#376151,#376162,.T.); +#376160 = VERTEX_POINT('',#376161); +#376161 = CARTESIAN_POINT('',(149.035,-133.38,0.)); +#376162 = LINE('',#376163,#376164); +#376163 = CARTESIAN_POINT('',(149.035,-133.38,0.)); +#376164 = VECTOR('',#376165,1.); +#376165 = DIRECTION('',(0.,0.,-1.)); +#376166 = ORIENTED_EDGE('',*,*,#376167,.F.); +#376167 = EDGE_CURVE('',#376141,#376160,#376168,.T.); +#376168 = CIRCLE('',#376169,0.135001418495); +#376169 = AXIS2_PLACEMENT_3D('',#376170,#376171,#376172); +#376170 = CARTESIAN_POINT('',(149.03500141848,-133.5150014184,0.)); +#376171 = DIRECTION('',(0.,0.,-1.)); +#376172 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#376173 = CYLINDRICAL_SURFACE('',#376174,0.135001418495); +#376174 = AXIS2_PLACEMENT_3D('',#376175,#376176,#376177); +#376175 = CARTESIAN_POINT('',(149.03500141848,-133.5150014184,0.)); +#376176 = DIRECTION('',(-0.,-0.,1.)); +#376177 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#376178 = ADVANCED_FACE('',(#376179),#376204,.F.); +#376179 = FACE_BOUND('',#376180,.F.); +#376180 = EDGE_LOOP('',(#376181,#376182,#376190,#376198)); +#376181 = ORIENTED_EDGE('',*,*,#376159,.T.); +#376182 = ORIENTED_EDGE('',*,*,#376183,.T.); +#376183 = EDGE_CURVE('',#376151,#376184,#376186,.T.); +#376184 = VERTEX_POINT('',#376185); +#376185 = CARTESIAN_POINT('',(149.305,-133.38,-4.E-02)); +#376186 = LINE('',#376187,#376188); +#376187 = CARTESIAN_POINT('',(149.035,-133.38,-4.E-02)); +#376188 = VECTOR('',#376189,1.); +#376189 = DIRECTION('',(1.,0.,0.)); +#376190 = ORIENTED_EDGE('',*,*,#376191,.F.); +#376191 = EDGE_CURVE('',#376192,#376184,#376194,.T.); +#376192 = VERTEX_POINT('',#376193); +#376193 = CARTESIAN_POINT('',(149.305,-133.38,0.)); +#376194 = LINE('',#376195,#376196); +#376195 = CARTESIAN_POINT('',(149.305,-133.38,0.)); +#376196 = VECTOR('',#376197,1.); +#376197 = DIRECTION('',(0.,0.,-1.)); +#376198 = ORIENTED_EDGE('',*,*,#376199,.F.); +#376199 = EDGE_CURVE('',#376160,#376192,#376200,.T.); +#376200 = LINE('',#376201,#376202); +#376201 = CARTESIAN_POINT('',(149.035,-133.38,0.)); +#376202 = VECTOR('',#376203,1.); +#376203 = DIRECTION('',(1.,0.,0.)); +#376204 = PLANE('',#376205); +#376205 = AXIS2_PLACEMENT_3D('',#376206,#376207,#376208); +#376206 = CARTESIAN_POINT('',(149.035,-133.38,0.)); +#376207 = DIRECTION('',(0.,-1.,0.)); +#376208 = DIRECTION('',(1.,0.,0.)); +#376209 = ADVANCED_FACE('',(#376210),#376237,.T.); +#376210 = FACE_BOUND('',#376211,.F.); +#376211 = EDGE_LOOP('',(#376212,#376213,#376222,#376230)); +#376212 = ORIENTED_EDGE('',*,*,#376191,.T.); +#376213 = ORIENTED_EDGE('',*,*,#376214,.T.); +#376214 = EDGE_CURVE('',#376184,#376215,#376217,.T.); +#376215 = VERTEX_POINT('',#376216); +#376216 = CARTESIAN_POINT('',(149.44,-133.515,-4.E-02)); +#376217 = CIRCLE('',#376218,0.135001418495); +#376218 = AXIS2_PLACEMENT_3D('',#376219,#376220,#376221); +#376219 = CARTESIAN_POINT('',(149.30499858151,-133.5150014184,-4.E-02)); +#376220 = DIRECTION('',(0.,0.,-1.)); +#376221 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#376222 = ORIENTED_EDGE('',*,*,#376223,.F.); +#376223 = EDGE_CURVE('',#376224,#376215,#376226,.T.); +#376224 = VERTEX_POINT('',#376225); +#376225 = CARTESIAN_POINT('',(149.44,-133.515,0.)); +#376226 = LINE('',#376227,#376228); +#376227 = CARTESIAN_POINT('',(149.44,-133.515,0.)); +#376228 = VECTOR('',#376229,1.); +#376229 = DIRECTION('',(0.,0.,-1.)); +#376230 = ORIENTED_EDGE('',*,*,#376231,.F.); +#376231 = EDGE_CURVE('',#376192,#376224,#376232,.T.); +#376232 = CIRCLE('',#376233,0.135001418495); +#376233 = AXIS2_PLACEMENT_3D('',#376234,#376235,#376236); +#376234 = CARTESIAN_POINT('',(149.30499858151,-133.5150014184,0.)); +#376235 = DIRECTION('',(0.,0.,-1.)); +#376236 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#376237 = CYLINDRICAL_SURFACE('',#376238,0.135001418495); +#376238 = AXIS2_PLACEMENT_3D('',#376239,#376240,#376241); +#376239 = CARTESIAN_POINT('',(149.30499858151,-133.5150014184,0.)); +#376240 = DIRECTION('',(-0.,-0.,1.)); +#376241 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#376242 = ADVANCED_FACE('',(#376243),#376268,.F.); +#376243 = FACE_BOUND('',#376244,.F.); +#376244 = EDGE_LOOP('',(#376245,#376246,#376254,#376262)); +#376245 = ORIENTED_EDGE('',*,*,#376223,.T.); +#376246 = ORIENTED_EDGE('',*,*,#376247,.T.); +#376247 = EDGE_CURVE('',#376215,#376248,#376250,.T.); +#376248 = VERTEX_POINT('',#376249); +#376249 = CARTESIAN_POINT('',(149.44,-133.885,-4.E-02)); +#376250 = LINE('',#376251,#376252); +#376251 = CARTESIAN_POINT('',(149.44,-133.515,-4.E-02)); +#376252 = VECTOR('',#376253,1.); +#376253 = DIRECTION('',(0.,-1.,0.)); +#376254 = ORIENTED_EDGE('',*,*,#376255,.F.); +#376255 = EDGE_CURVE('',#376256,#376248,#376258,.T.); +#376256 = VERTEX_POINT('',#376257); +#376257 = CARTESIAN_POINT('',(149.44,-133.885,0.)); +#376258 = LINE('',#376259,#376260); +#376259 = CARTESIAN_POINT('',(149.44,-133.885,0.)); +#376260 = VECTOR('',#376261,1.); +#376261 = DIRECTION('',(0.,0.,-1.)); +#376262 = ORIENTED_EDGE('',*,*,#376263,.F.); +#376263 = EDGE_CURVE('',#376224,#376256,#376264,.T.); +#376264 = LINE('',#376265,#376266); +#376265 = CARTESIAN_POINT('',(149.44,-133.515,0.)); +#376266 = VECTOR('',#376267,1.); +#376267 = DIRECTION('',(0.,-1.,0.)); +#376268 = PLANE('',#376269); +#376269 = AXIS2_PLACEMENT_3D('',#376270,#376271,#376272); +#376270 = CARTESIAN_POINT('',(149.44,-133.515,0.)); +#376271 = DIRECTION('',(-1.,-0.,-0.)); +#376272 = DIRECTION('',(0.,-1.,0.)); +#376273 = ADVANCED_FACE('',(#376274),#376301,.T.); +#376274 = FACE_BOUND('',#376275,.F.); +#376275 = EDGE_LOOP('',(#376276,#376277,#376286,#376294)); +#376276 = ORIENTED_EDGE('',*,*,#376255,.T.); +#376277 = ORIENTED_EDGE('',*,*,#376278,.T.); +#376278 = EDGE_CURVE('',#376248,#376279,#376281,.T.); +#376279 = VERTEX_POINT('',#376280); +#376280 = CARTESIAN_POINT('',(149.305,-134.02,-4.E-02)); +#376281 = CIRCLE('',#376282,0.135001418495); +#376282 = AXIS2_PLACEMENT_3D('',#376283,#376284,#376285); +#376283 = CARTESIAN_POINT('',(149.30499858151,-133.8849985815,-4.E-02)); +#376284 = DIRECTION('',(0.,0.,-1.)); +#376285 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#376286 = ORIENTED_EDGE('',*,*,#376287,.F.); +#376287 = EDGE_CURVE('',#376288,#376279,#376290,.T.); +#376288 = VERTEX_POINT('',#376289); +#376289 = CARTESIAN_POINT('',(149.305,-134.02,0.)); +#376290 = LINE('',#376291,#376292); +#376291 = CARTESIAN_POINT('',(149.305,-134.02,0.)); +#376292 = VECTOR('',#376293,1.); +#376293 = DIRECTION('',(0.,0.,-1.)); +#376294 = ORIENTED_EDGE('',*,*,#376295,.F.); +#376295 = EDGE_CURVE('',#376256,#376288,#376296,.T.); +#376296 = CIRCLE('',#376297,0.135001418495); +#376297 = AXIS2_PLACEMENT_3D('',#376298,#376299,#376300); +#376298 = CARTESIAN_POINT('',(149.30499858151,-133.8849985815,0.)); +#376299 = DIRECTION('',(0.,0.,-1.)); +#376300 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#376301 = CYLINDRICAL_SURFACE('',#376302,0.135001418495); +#376302 = AXIS2_PLACEMENT_3D('',#376303,#376304,#376305); +#376303 = CARTESIAN_POINT('',(149.30499858151,-133.8849985815,0.)); +#376304 = DIRECTION('',(-0.,-0.,1.)); +#376305 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#376306 = ADVANCED_FACE('',(#376307),#376332,.F.); +#376307 = FACE_BOUND('',#376308,.F.); +#376308 = EDGE_LOOP('',(#376309,#376310,#376318,#376326)); +#376309 = ORIENTED_EDGE('',*,*,#376287,.T.); +#376310 = ORIENTED_EDGE('',*,*,#376311,.T.); +#376311 = EDGE_CURVE('',#376279,#376312,#376314,.T.); +#376312 = VERTEX_POINT('',#376313); +#376313 = CARTESIAN_POINT('',(149.035,-134.02,-4.E-02)); +#376314 = LINE('',#376315,#376316); +#376315 = CARTESIAN_POINT('',(149.305,-134.02,-4.E-02)); +#376316 = VECTOR('',#376317,1.); +#376317 = DIRECTION('',(-1.,0.,0.)); +#376318 = ORIENTED_EDGE('',*,*,#376319,.F.); +#376319 = EDGE_CURVE('',#376320,#376312,#376322,.T.); +#376320 = VERTEX_POINT('',#376321); +#376321 = CARTESIAN_POINT('',(149.035,-134.02,0.)); +#376322 = LINE('',#376323,#376324); +#376323 = CARTESIAN_POINT('',(149.035,-134.02,0.)); +#376324 = VECTOR('',#376325,1.); +#376325 = DIRECTION('',(0.,0.,-1.)); +#376326 = ORIENTED_EDGE('',*,*,#376327,.F.); +#376327 = EDGE_CURVE('',#376288,#376320,#376328,.T.); +#376328 = LINE('',#376329,#376330); +#376329 = CARTESIAN_POINT('',(149.305,-134.02,0.)); +#376330 = VECTOR('',#376331,1.); +#376331 = DIRECTION('',(-1.,0.,0.)); +#376332 = PLANE('',#376333); +#376333 = AXIS2_PLACEMENT_3D('',#376334,#376335,#376336); +#376334 = CARTESIAN_POINT('',(149.305,-134.02,0.)); +#376335 = DIRECTION('',(0.,1.,0.)); +#376336 = DIRECTION('',(-1.,0.,0.)); +#376337 = ADVANCED_FACE('',(#376338),#376365,.T.); +#376338 = FACE_BOUND('',#376339,.F.); +#376339 = EDGE_LOOP('',(#376340,#376341,#376350,#376358)); +#376340 = ORIENTED_EDGE('',*,*,#376319,.T.); +#376341 = ORIENTED_EDGE('',*,*,#376342,.T.); +#376342 = EDGE_CURVE('',#376312,#376343,#376345,.T.); +#376343 = VERTEX_POINT('',#376344); +#376344 = CARTESIAN_POINT('',(148.9,-133.885,-4.E-02)); +#376345 = CIRCLE('',#376346,0.135001418495); +#376346 = AXIS2_PLACEMENT_3D('',#376347,#376348,#376349); +#376347 = CARTESIAN_POINT('',(149.03500141848,-133.8849985815,-4.E-02)); +#376348 = DIRECTION('',(0.,0.,-1.)); +#376349 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#376350 = ORIENTED_EDGE('',*,*,#376351,.F.); +#376351 = EDGE_CURVE('',#376352,#376343,#376354,.T.); +#376352 = VERTEX_POINT('',#376353); +#376353 = CARTESIAN_POINT('',(148.9,-133.885,0.)); +#376354 = LINE('',#376355,#376356); +#376355 = CARTESIAN_POINT('',(148.9,-133.885,0.)); +#376356 = VECTOR('',#376357,1.); +#376357 = DIRECTION('',(0.,0.,-1.)); +#376358 = ORIENTED_EDGE('',*,*,#376359,.F.); +#376359 = EDGE_CURVE('',#376320,#376352,#376360,.T.); +#376360 = CIRCLE('',#376361,0.135001418495); +#376361 = AXIS2_PLACEMENT_3D('',#376362,#376363,#376364); +#376362 = CARTESIAN_POINT('',(149.03500141848,-133.8849985815,0.)); +#376363 = DIRECTION('',(0.,0.,-1.)); +#376364 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#376365 = CYLINDRICAL_SURFACE('',#376366,0.135001418495); +#376366 = AXIS2_PLACEMENT_3D('',#376367,#376368,#376369); +#376367 = CARTESIAN_POINT('',(149.03500141848,-133.8849985815,0.)); +#376368 = DIRECTION('',(-0.,-0.,1.)); +#376369 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#376370 = ADVANCED_FACE('',(#376371),#376387,.F.); +#376371 = FACE_BOUND('',#376372,.F.); +#376372 = EDGE_LOOP('',(#376373,#376374,#376380,#376381)); +#376373 = ORIENTED_EDGE('',*,*,#376351,.T.); +#376374 = ORIENTED_EDGE('',*,*,#376375,.T.); +#376375 = EDGE_CURVE('',#376343,#376143,#376376,.T.); +#376376 = LINE('',#376377,#376378); +#376377 = CARTESIAN_POINT('',(148.9,-133.885,-4.E-02)); +#376378 = VECTOR('',#376379,1.); +#376379 = DIRECTION('',(0.,1.,0.)); +#376380 = ORIENTED_EDGE('',*,*,#376140,.F.); +#376381 = ORIENTED_EDGE('',*,*,#376382,.F.); +#376382 = EDGE_CURVE('',#376352,#376141,#376383,.T.); +#376383 = LINE('',#376384,#376385); +#376384 = CARTESIAN_POINT('',(148.9,-133.885,0.)); +#376385 = VECTOR('',#376386,1.); +#376386 = DIRECTION('',(0.,1.,0.)); +#376387 = PLANE('',#376388); +#376388 = AXIS2_PLACEMENT_3D('',#376389,#376390,#376391); +#376389 = CARTESIAN_POINT('',(148.9,-133.885,0.)); +#376390 = DIRECTION('',(1.,-0.,0.)); +#376391 = DIRECTION('',(0.,1.,0.)); +#376392 = ADVANCED_FACE('',(#376393),#376403,.F.); +#376393 = FACE_BOUND('',#376394,.F.); +#376394 = EDGE_LOOP('',(#376395,#376396,#376397,#376398,#376399,#376400, + #376401,#376402)); +#376395 = ORIENTED_EDGE('',*,*,#376167,.T.); +#376396 = ORIENTED_EDGE('',*,*,#376199,.T.); +#376397 = ORIENTED_EDGE('',*,*,#376231,.T.); +#376398 = ORIENTED_EDGE('',*,*,#376263,.T.); +#376399 = ORIENTED_EDGE('',*,*,#376295,.T.); +#376400 = ORIENTED_EDGE('',*,*,#376327,.T.); +#376401 = ORIENTED_EDGE('',*,*,#376359,.T.); +#376402 = ORIENTED_EDGE('',*,*,#376382,.T.); +#376403 = PLANE('',#376404); +#376404 = AXIS2_PLACEMENT_3D('',#376405,#376406,#376407); +#376405 = CARTESIAN_POINT('',(0.,0.,0.)); +#376406 = DIRECTION('',(-0.,-0.,-1.)); +#376407 = DIRECTION('',(-1.,0.,0.)); +#376408 = ADVANCED_FACE('',(#376409),#376419,.T.); +#376409 = FACE_BOUND('',#376410,.T.); +#376410 = EDGE_LOOP('',(#376411,#376412,#376413,#376414,#376415,#376416, + #376417,#376418)); +#376411 = ORIENTED_EDGE('',*,*,#376150,.T.); +#376412 = ORIENTED_EDGE('',*,*,#376183,.T.); +#376413 = ORIENTED_EDGE('',*,*,#376214,.T.); +#376414 = ORIENTED_EDGE('',*,*,#376247,.T.); +#376415 = ORIENTED_EDGE('',*,*,#376278,.T.); +#376416 = ORIENTED_EDGE('',*,*,#376311,.T.); +#376417 = ORIENTED_EDGE('',*,*,#376342,.T.); +#376418 = ORIENTED_EDGE('',*,*,#376375,.T.); +#376419 = PLANE('',#376420); +#376420 = AXIS2_PLACEMENT_3D('',#376421,#376422,#376423); +#376421 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#376422 = DIRECTION('',(-0.,-0.,-1.)); +#376423 = DIRECTION('',(-1.,0.,0.)); +#376424 = MANIFOLD_SOLID_BREP('',#376425); +#376425 = CLOSED_SHELL('',(#376426,#376468,#376499,#376532,#376563, + #376596,#376627,#376660,#376682,#376698)); +#376426 = ADVANCED_FACE('',(#376427),#376463,.T.); +#376427 = FACE_BOUND('',#376428,.F.); +#376428 = EDGE_LOOP('',(#376429,#376439,#376448,#376456)); +#376429 = ORIENTED_EDGE('',*,*,#376430,.T.); +#376430 = EDGE_CURVE('',#376431,#376433,#376435,.T.); +#376431 = VERTEX_POINT('',#376432); +#376432 = CARTESIAN_POINT('',(121.3,-108.8,0.)); +#376433 = VERTEX_POINT('',#376434); +#376434 = CARTESIAN_POINT('',(121.3,-108.8,-4.E-02)); +#376435 = LINE('',#376436,#376437); +#376436 = CARTESIAN_POINT('',(121.3,-108.8,0.)); +#376437 = VECTOR('',#376438,1.); +#376438 = DIRECTION('',(0.,0.,-1.)); +#376439 = ORIENTED_EDGE('',*,*,#376440,.T.); +#376440 = EDGE_CURVE('',#376433,#376441,#376443,.T.); +#376441 = VERTEX_POINT('',#376442); +#376442 = CARTESIAN_POINT('',(121.55,-108.55,-4.E-02)); +#376443 = CIRCLE('',#376444,0.249998959685); +#376444 = AXIS2_PLACEMENT_3D('',#376445,#376446,#376447); +#376445 = CARTESIAN_POINT('',(121.54999895968,-108.7999989596,-4.E-02)); +#376446 = DIRECTION('',(0.,0.,-1.)); +#376447 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#376448 = ORIENTED_EDGE('',*,*,#376449,.F.); +#376449 = EDGE_CURVE('',#376450,#376441,#376452,.T.); +#376450 = VERTEX_POINT('',#376451); +#376451 = CARTESIAN_POINT('',(121.55,-108.55,0.)); +#376452 = LINE('',#376453,#376454); +#376453 = CARTESIAN_POINT('',(121.55,-108.55,0.)); +#376454 = VECTOR('',#376455,1.); +#376455 = DIRECTION('',(0.,0.,-1.)); +#376456 = ORIENTED_EDGE('',*,*,#376457,.F.); +#376457 = EDGE_CURVE('',#376431,#376450,#376458,.T.); +#376458 = CIRCLE('',#376459,0.249998959685); +#376459 = AXIS2_PLACEMENT_3D('',#376460,#376461,#376462); +#376460 = CARTESIAN_POINT('',(121.54999895968,-108.7999989596,0.)); +#376461 = DIRECTION('',(0.,0.,-1.)); +#376462 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#376463 = CYLINDRICAL_SURFACE('',#376464,0.249998959685); +#376464 = AXIS2_PLACEMENT_3D('',#376465,#376466,#376467); +#376465 = CARTESIAN_POINT('',(121.54999895968,-108.7999989596,0.)); +#376466 = DIRECTION('',(-0.,-0.,1.)); +#376467 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#376468 = ADVANCED_FACE('',(#376469),#376494,.F.); +#376469 = FACE_BOUND('',#376470,.F.); +#376470 = EDGE_LOOP('',(#376471,#376472,#376480,#376488)); +#376471 = ORIENTED_EDGE('',*,*,#376449,.T.); +#376472 = ORIENTED_EDGE('',*,*,#376473,.T.); +#376473 = EDGE_CURVE('',#376441,#376474,#376476,.T.); +#376474 = VERTEX_POINT('',#376475); +#376475 = CARTESIAN_POINT('',(122.5,-108.55,-4.E-02)); +#376476 = LINE('',#376477,#376478); +#376477 = CARTESIAN_POINT('',(121.55,-108.55,-4.E-02)); +#376478 = VECTOR('',#376479,1.); +#376479 = DIRECTION('',(1.,0.,0.)); +#376480 = ORIENTED_EDGE('',*,*,#376481,.F.); +#376481 = EDGE_CURVE('',#376482,#376474,#376484,.T.); +#376482 = VERTEX_POINT('',#376483); +#376483 = CARTESIAN_POINT('',(122.5,-108.55,0.)); +#376484 = LINE('',#376485,#376486); +#376485 = CARTESIAN_POINT('',(122.5,-108.55,0.)); +#376486 = VECTOR('',#376487,1.); +#376487 = DIRECTION('',(0.,0.,-1.)); +#376488 = ORIENTED_EDGE('',*,*,#376489,.F.); +#376489 = EDGE_CURVE('',#376450,#376482,#376490,.T.); +#376490 = LINE('',#376491,#376492); +#376491 = CARTESIAN_POINT('',(121.55,-108.55,0.)); +#376492 = VECTOR('',#376493,1.); +#376493 = DIRECTION('',(1.,0.,0.)); +#376494 = PLANE('',#376495); +#376495 = AXIS2_PLACEMENT_3D('',#376496,#376497,#376498); +#376496 = CARTESIAN_POINT('',(121.55,-108.55,0.)); +#376497 = DIRECTION('',(0.,-1.,0.)); +#376498 = DIRECTION('',(1.,0.,0.)); +#376499 = ADVANCED_FACE('',(#376500),#376527,.T.); +#376500 = FACE_BOUND('',#376501,.F.); +#376501 = EDGE_LOOP('',(#376502,#376503,#376512,#376520)); +#376502 = ORIENTED_EDGE('',*,*,#376481,.T.); +#376503 = ORIENTED_EDGE('',*,*,#376504,.T.); +#376504 = EDGE_CURVE('',#376474,#376505,#376507,.T.); +#376505 = VERTEX_POINT('',#376506); +#376506 = CARTESIAN_POINT('',(122.75,-108.8,-4.E-02)); +#376507 = CIRCLE('',#376508,0.249998959685); +#376508 = AXIS2_PLACEMENT_3D('',#376509,#376510,#376511); +#376509 = CARTESIAN_POINT('',(122.50000104031,-108.7999989596,-4.E-02)); +#376510 = DIRECTION('',(0.,0.,-1.)); +#376511 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#376512 = ORIENTED_EDGE('',*,*,#376513,.F.); +#376513 = EDGE_CURVE('',#376514,#376505,#376516,.T.); +#376514 = VERTEX_POINT('',#376515); +#376515 = CARTESIAN_POINT('',(122.75,-108.8,0.)); +#376516 = LINE('',#376517,#376518); +#376517 = CARTESIAN_POINT('',(122.75,-108.8,0.)); +#376518 = VECTOR('',#376519,1.); +#376519 = DIRECTION('',(0.,0.,-1.)); +#376520 = ORIENTED_EDGE('',*,*,#376521,.F.); +#376521 = EDGE_CURVE('',#376482,#376514,#376522,.T.); +#376522 = CIRCLE('',#376523,0.249998959685); +#376523 = AXIS2_PLACEMENT_3D('',#376524,#376525,#376526); +#376524 = CARTESIAN_POINT('',(122.50000104031,-108.7999989596,0.)); +#376525 = DIRECTION('',(0.,0.,-1.)); +#376526 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#376527 = CYLINDRICAL_SURFACE('',#376528,0.249998959685); +#376528 = AXIS2_PLACEMENT_3D('',#376529,#376530,#376531); +#376529 = CARTESIAN_POINT('',(122.50000104031,-108.7999989596,0.)); +#376530 = DIRECTION('',(-0.,-0.,1.)); +#376531 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#376532 = ADVANCED_FACE('',(#376533),#376558,.F.); +#376533 = FACE_BOUND('',#376534,.F.); +#376534 = EDGE_LOOP('',(#376535,#376536,#376544,#376552)); +#376535 = ORIENTED_EDGE('',*,*,#376513,.T.); +#376536 = ORIENTED_EDGE('',*,*,#376537,.T.); +#376537 = EDGE_CURVE('',#376505,#376538,#376540,.T.); +#376538 = VERTEX_POINT('',#376539); +#376539 = CARTESIAN_POINT('',(122.75,-109.3,-4.E-02)); +#376540 = LINE('',#376541,#376542); +#376541 = CARTESIAN_POINT('',(122.75,-108.8,-4.E-02)); +#376542 = VECTOR('',#376543,1.); +#376543 = DIRECTION('',(0.,-1.,0.)); +#376544 = ORIENTED_EDGE('',*,*,#376545,.F.); +#376545 = EDGE_CURVE('',#376546,#376538,#376548,.T.); +#376546 = VERTEX_POINT('',#376547); +#376547 = CARTESIAN_POINT('',(122.75,-109.3,0.)); +#376548 = LINE('',#376549,#376550); +#376549 = CARTESIAN_POINT('',(122.75,-109.3,0.)); +#376550 = VECTOR('',#376551,1.); +#376551 = DIRECTION('',(0.,0.,-1.)); +#376552 = ORIENTED_EDGE('',*,*,#376553,.F.); +#376553 = EDGE_CURVE('',#376514,#376546,#376554,.T.); +#376554 = LINE('',#376555,#376556); +#376555 = CARTESIAN_POINT('',(122.75,-108.8,0.)); +#376556 = VECTOR('',#376557,1.); +#376557 = DIRECTION('',(0.,-1.,0.)); +#376558 = PLANE('',#376559); +#376559 = AXIS2_PLACEMENT_3D('',#376560,#376561,#376562); +#376560 = CARTESIAN_POINT('',(122.75,-108.8,0.)); +#376561 = DIRECTION('',(-1.,-0.,-0.)); +#376562 = DIRECTION('',(0.,-1.,0.)); +#376563 = ADVANCED_FACE('',(#376564),#376591,.T.); +#376564 = FACE_BOUND('',#376565,.F.); +#376565 = EDGE_LOOP('',(#376566,#376567,#376576,#376584)); +#376566 = ORIENTED_EDGE('',*,*,#376545,.T.); +#376567 = ORIENTED_EDGE('',*,*,#376568,.T.); +#376568 = EDGE_CURVE('',#376538,#376569,#376571,.T.); +#376569 = VERTEX_POINT('',#376570); +#376570 = CARTESIAN_POINT('',(122.5,-109.55,-4.E-02)); +#376571 = CIRCLE('',#376572,0.249998959685); +#376572 = AXIS2_PLACEMENT_3D('',#376573,#376574,#376575); +#376573 = CARTESIAN_POINT('',(122.50000104031,-109.3000010403,-4.E-02)); +#376574 = DIRECTION('',(0.,0.,-1.)); +#376575 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#376576 = ORIENTED_EDGE('',*,*,#376577,.F.); +#376577 = EDGE_CURVE('',#376578,#376569,#376580,.T.); +#376578 = VERTEX_POINT('',#376579); +#376579 = CARTESIAN_POINT('',(122.5,-109.55,0.)); +#376580 = LINE('',#376581,#376582); +#376581 = CARTESIAN_POINT('',(122.5,-109.55,0.)); +#376582 = VECTOR('',#376583,1.); +#376583 = DIRECTION('',(0.,0.,-1.)); +#376584 = ORIENTED_EDGE('',*,*,#376585,.F.); +#376585 = EDGE_CURVE('',#376546,#376578,#376586,.T.); +#376586 = CIRCLE('',#376587,0.249998959685); +#376587 = AXIS2_PLACEMENT_3D('',#376588,#376589,#376590); +#376588 = CARTESIAN_POINT('',(122.50000104031,-109.3000010403,0.)); +#376589 = DIRECTION('',(0.,0.,-1.)); +#376590 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#376591 = CYLINDRICAL_SURFACE('',#376592,0.249998959685); +#376592 = AXIS2_PLACEMENT_3D('',#376593,#376594,#376595); +#376593 = CARTESIAN_POINT('',(122.50000104031,-109.3000010403,0.)); +#376594 = DIRECTION('',(-0.,-0.,1.)); +#376595 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#376596 = ADVANCED_FACE('',(#376597),#376622,.F.); +#376597 = FACE_BOUND('',#376598,.F.); +#376598 = EDGE_LOOP('',(#376599,#376600,#376608,#376616)); +#376599 = ORIENTED_EDGE('',*,*,#376577,.T.); +#376600 = ORIENTED_EDGE('',*,*,#376601,.T.); +#376601 = EDGE_CURVE('',#376569,#376602,#376604,.T.); +#376602 = VERTEX_POINT('',#376603); +#376603 = CARTESIAN_POINT('',(121.55,-109.55,-4.E-02)); +#376604 = LINE('',#376605,#376606); +#376605 = CARTESIAN_POINT('',(122.5,-109.55,-4.E-02)); +#376606 = VECTOR('',#376607,1.); +#376607 = DIRECTION('',(-1.,0.,0.)); +#376608 = ORIENTED_EDGE('',*,*,#376609,.F.); +#376609 = EDGE_CURVE('',#376610,#376602,#376612,.T.); +#376610 = VERTEX_POINT('',#376611); +#376611 = CARTESIAN_POINT('',(121.55,-109.55,0.)); +#376612 = LINE('',#376613,#376614); +#376613 = CARTESIAN_POINT('',(121.55,-109.55,0.)); +#376614 = VECTOR('',#376615,1.); +#376615 = DIRECTION('',(0.,0.,-1.)); +#376616 = ORIENTED_EDGE('',*,*,#376617,.F.); +#376617 = EDGE_CURVE('',#376578,#376610,#376618,.T.); +#376618 = LINE('',#376619,#376620); +#376619 = CARTESIAN_POINT('',(122.5,-109.55,0.)); +#376620 = VECTOR('',#376621,1.); +#376621 = DIRECTION('',(-1.,0.,0.)); +#376622 = PLANE('',#376623); +#376623 = AXIS2_PLACEMENT_3D('',#376624,#376625,#376626); +#376624 = CARTESIAN_POINT('',(122.5,-109.55,0.)); +#376625 = DIRECTION('',(0.,1.,0.)); +#376626 = DIRECTION('',(-1.,0.,0.)); +#376627 = ADVANCED_FACE('',(#376628),#376655,.T.); +#376628 = FACE_BOUND('',#376629,.F.); +#376629 = EDGE_LOOP('',(#376630,#376631,#376640,#376648)); +#376630 = ORIENTED_EDGE('',*,*,#376609,.T.); +#376631 = ORIENTED_EDGE('',*,*,#376632,.T.); +#376632 = EDGE_CURVE('',#376602,#376633,#376635,.T.); +#376633 = VERTEX_POINT('',#376634); +#376634 = CARTESIAN_POINT('',(121.3,-109.3,-4.E-02)); +#376635 = CIRCLE('',#376636,0.249998959685); +#376636 = AXIS2_PLACEMENT_3D('',#376637,#376638,#376639); +#376637 = CARTESIAN_POINT('',(121.54999895968,-109.3000010403,-4.E-02)); +#376638 = DIRECTION('',(0.,0.,-1.)); +#376639 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#376640 = ORIENTED_EDGE('',*,*,#376641,.F.); +#376641 = EDGE_CURVE('',#376642,#376633,#376644,.T.); +#376642 = VERTEX_POINT('',#376643); +#376643 = CARTESIAN_POINT('',(121.3,-109.3,0.)); +#376644 = LINE('',#376645,#376646); +#376645 = CARTESIAN_POINT('',(121.3,-109.3,0.)); +#376646 = VECTOR('',#376647,1.); +#376647 = DIRECTION('',(0.,0.,-1.)); +#376648 = ORIENTED_EDGE('',*,*,#376649,.F.); +#376649 = EDGE_CURVE('',#376610,#376642,#376650,.T.); +#376650 = CIRCLE('',#376651,0.249998959685); +#376651 = AXIS2_PLACEMENT_3D('',#376652,#376653,#376654); +#376652 = CARTESIAN_POINT('',(121.54999895968,-109.3000010403,0.)); +#376653 = DIRECTION('',(0.,0.,-1.)); +#376654 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#376655 = CYLINDRICAL_SURFACE('',#376656,0.249998959685); +#376656 = AXIS2_PLACEMENT_3D('',#376657,#376658,#376659); +#376657 = CARTESIAN_POINT('',(121.54999895968,-109.3000010403,0.)); +#376658 = DIRECTION('',(-0.,-0.,1.)); +#376659 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#376660 = ADVANCED_FACE('',(#376661),#376677,.F.); +#376661 = FACE_BOUND('',#376662,.F.); +#376662 = EDGE_LOOP('',(#376663,#376664,#376670,#376671)); +#376663 = ORIENTED_EDGE('',*,*,#376641,.T.); +#376664 = ORIENTED_EDGE('',*,*,#376665,.T.); +#376665 = EDGE_CURVE('',#376633,#376433,#376666,.T.); +#376666 = LINE('',#376667,#376668); +#376667 = CARTESIAN_POINT('',(121.3,-109.3,-4.E-02)); +#376668 = VECTOR('',#376669,1.); +#376669 = DIRECTION('',(0.,1.,0.)); +#376670 = ORIENTED_EDGE('',*,*,#376430,.F.); +#376671 = ORIENTED_EDGE('',*,*,#376672,.F.); +#376672 = EDGE_CURVE('',#376642,#376431,#376673,.T.); +#376673 = LINE('',#376674,#376675); +#376674 = CARTESIAN_POINT('',(121.3,-109.3,0.)); +#376675 = VECTOR('',#376676,1.); +#376676 = DIRECTION('',(0.,1.,0.)); +#376677 = PLANE('',#376678); +#376678 = AXIS2_PLACEMENT_3D('',#376679,#376680,#376681); +#376679 = CARTESIAN_POINT('',(121.3,-109.3,0.)); +#376680 = DIRECTION('',(1.,-0.,0.)); +#376681 = DIRECTION('',(0.,1.,0.)); +#376682 = ADVANCED_FACE('',(#376683),#376693,.F.); +#376683 = FACE_BOUND('',#376684,.F.); +#376684 = EDGE_LOOP('',(#376685,#376686,#376687,#376688,#376689,#376690, + #376691,#376692)); +#376685 = ORIENTED_EDGE('',*,*,#376457,.T.); +#376686 = ORIENTED_EDGE('',*,*,#376489,.T.); +#376687 = ORIENTED_EDGE('',*,*,#376521,.T.); +#376688 = ORIENTED_EDGE('',*,*,#376553,.T.); +#376689 = ORIENTED_EDGE('',*,*,#376585,.T.); +#376690 = ORIENTED_EDGE('',*,*,#376617,.T.); +#376691 = ORIENTED_EDGE('',*,*,#376649,.T.); +#376692 = ORIENTED_EDGE('',*,*,#376672,.T.); +#376693 = PLANE('',#376694); +#376694 = AXIS2_PLACEMENT_3D('',#376695,#376696,#376697); +#376695 = CARTESIAN_POINT('',(0.,0.,0.)); +#376696 = DIRECTION('',(-0.,-0.,-1.)); +#376697 = DIRECTION('',(-1.,0.,0.)); +#376698 = ADVANCED_FACE('',(#376699),#376709,.T.); +#376699 = FACE_BOUND('',#376700,.T.); +#376700 = EDGE_LOOP('',(#376701,#376702,#376703,#376704,#376705,#376706, + #376707,#376708)); +#376701 = ORIENTED_EDGE('',*,*,#376440,.T.); +#376702 = ORIENTED_EDGE('',*,*,#376473,.T.); +#376703 = ORIENTED_EDGE('',*,*,#376504,.T.); +#376704 = ORIENTED_EDGE('',*,*,#376537,.T.); +#376705 = ORIENTED_EDGE('',*,*,#376568,.T.); +#376706 = ORIENTED_EDGE('',*,*,#376601,.T.); +#376707 = ORIENTED_EDGE('',*,*,#376632,.T.); +#376708 = ORIENTED_EDGE('',*,*,#376665,.T.); +#376709 = PLANE('',#376710); +#376710 = AXIS2_PLACEMENT_3D('',#376711,#376712,#376713); +#376711 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#376712 = DIRECTION('',(-0.,-0.,-1.)); +#376713 = DIRECTION('',(-1.,0.,0.)); +#376714 = MANIFOLD_SOLID_BREP('',#376715); +#376715 = CLOSED_SHELL('',(#376716,#376758,#376789,#376822,#376853, + #376886,#376917,#376950,#376972,#376988)); +#376716 = ADVANCED_FACE('',(#376717),#376753,.T.); +#376717 = FACE_BOUND('',#376718,.F.); +#376718 = EDGE_LOOP('',(#376719,#376729,#376738,#376746)); +#376719 = ORIENTED_EDGE('',*,*,#376720,.T.); +#376720 = EDGE_CURVE('',#376721,#376723,#376725,.T.); +#376721 = VERTEX_POINT('',#376722); +#376722 = CARTESIAN_POINT('',(141.625,-78.,0.)); +#376723 = VERTEX_POINT('',#376724); +#376724 = CARTESIAN_POINT('',(141.625,-78.,-4.E-02)); +#376725 = LINE('',#376726,#376727); +#376726 = CARTESIAN_POINT('',(141.625,-78.,0.)); +#376727 = VECTOR('',#376728,1.); +#376728 = DIRECTION('',(0.,0.,-1.)); +#376729 = ORIENTED_EDGE('',*,*,#376730,.T.); +#376730 = EDGE_CURVE('',#376723,#376731,#376733,.T.); +#376731 = VERTEX_POINT('',#376732); +#376732 = CARTESIAN_POINT('',(141.7125,-77.9125,-4.E-02)); +#376733 = CIRCLE('',#376734,8.749946518212E-02); +#376734 = AXIS2_PLACEMENT_3D('',#376735,#376736,#376737); +#376735 = CARTESIAN_POINT('',(141.71249946518,-77.99999946518,-4.E-02)); +#376736 = DIRECTION('',(0.,0.,-1.)); +#376737 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#376738 = ORIENTED_EDGE('',*,*,#376739,.F.); +#376739 = EDGE_CURVE('',#376740,#376731,#376742,.T.); +#376740 = VERTEX_POINT('',#376741); +#376741 = CARTESIAN_POINT('',(141.7125,-77.9125,0.)); +#376742 = LINE('',#376743,#376744); +#376743 = CARTESIAN_POINT('',(141.7125,-77.9125,0.)); +#376744 = VECTOR('',#376745,1.); +#376745 = DIRECTION('',(0.,0.,-1.)); +#376746 = ORIENTED_EDGE('',*,*,#376747,.F.); +#376747 = EDGE_CURVE('',#376721,#376740,#376748,.T.); +#376748 = CIRCLE('',#376749,8.749946518212E-02); +#376749 = AXIS2_PLACEMENT_3D('',#376750,#376751,#376752); +#376750 = CARTESIAN_POINT('',(141.71249946518,-77.99999946518,0.)); +#376751 = DIRECTION('',(0.,0.,-1.)); +#376752 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#376753 = CYLINDRICAL_SURFACE('',#376754,8.749946518212E-02); +#376754 = AXIS2_PLACEMENT_3D('',#376755,#376756,#376757); +#376755 = CARTESIAN_POINT('',(141.71249946518,-77.99999946518,0.)); +#376756 = DIRECTION('',(-0.,-0.,1.)); +#376757 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#376758 = ADVANCED_FACE('',(#376759),#376784,.F.); +#376759 = FACE_BOUND('',#376760,.F.); +#376760 = EDGE_LOOP('',(#376761,#376762,#376770,#376778)); +#376761 = ORIENTED_EDGE('',*,*,#376739,.T.); +#376762 = ORIENTED_EDGE('',*,*,#376763,.T.); +#376763 = EDGE_CURVE('',#376731,#376764,#376766,.T.); +#376764 = VERTEX_POINT('',#376765); +#376765 = CARTESIAN_POINT('',(141.8875,-77.9125,-4.E-02)); +#376766 = LINE('',#376767,#376768); +#376767 = CARTESIAN_POINT('',(141.7125,-77.9125,-4.E-02)); +#376768 = VECTOR('',#376769,1.); +#376769 = DIRECTION('',(1.,0.,0.)); +#376770 = ORIENTED_EDGE('',*,*,#376771,.F.); +#376771 = EDGE_CURVE('',#376772,#376764,#376774,.T.); +#376772 = VERTEX_POINT('',#376773); +#376773 = CARTESIAN_POINT('',(141.8875,-77.9125,0.)); +#376774 = LINE('',#376775,#376776); +#376775 = CARTESIAN_POINT('',(141.8875,-77.9125,0.)); +#376776 = VECTOR('',#376777,1.); +#376777 = DIRECTION('',(0.,0.,-1.)); +#376778 = ORIENTED_EDGE('',*,*,#376779,.F.); +#376779 = EDGE_CURVE('',#376740,#376772,#376780,.T.); +#376780 = LINE('',#376781,#376782); +#376781 = CARTESIAN_POINT('',(141.7125,-77.9125,0.)); +#376782 = VECTOR('',#376783,1.); +#376783 = DIRECTION('',(1.,0.,0.)); +#376784 = PLANE('',#376785); +#376785 = AXIS2_PLACEMENT_3D('',#376786,#376787,#376788); +#376786 = CARTESIAN_POINT('',(141.7125,-77.9125,0.)); +#376787 = DIRECTION('',(0.,-1.,0.)); +#376788 = DIRECTION('',(1.,0.,0.)); +#376789 = ADVANCED_FACE('',(#376790),#376817,.T.); +#376790 = FACE_BOUND('',#376791,.F.); +#376791 = EDGE_LOOP('',(#376792,#376793,#376802,#376810)); +#376792 = ORIENTED_EDGE('',*,*,#376771,.T.); +#376793 = ORIENTED_EDGE('',*,*,#376794,.T.); +#376794 = EDGE_CURVE('',#376764,#376795,#376797,.T.); +#376795 = VERTEX_POINT('',#376796); +#376796 = CARTESIAN_POINT('',(141.975,-78.,-4.E-02)); +#376797 = CIRCLE('',#376798,8.749946518209E-02); +#376798 = AXIS2_PLACEMENT_3D('',#376799,#376800,#376801); +#376799 = CARTESIAN_POINT('',(141.88750053482,-77.99999946518,-4.E-02)); +#376800 = DIRECTION('',(0.,0.,-1.)); +#376801 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#376802 = ORIENTED_EDGE('',*,*,#376803,.F.); +#376803 = EDGE_CURVE('',#376804,#376795,#376806,.T.); +#376804 = VERTEX_POINT('',#376805); +#376805 = CARTESIAN_POINT('',(141.975,-78.,0.)); +#376806 = LINE('',#376807,#376808); +#376807 = CARTESIAN_POINT('',(141.975,-78.,0.)); +#376808 = VECTOR('',#376809,1.); +#376809 = DIRECTION('',(0.,0.,-1.)); +#376810 = ORIENTED_EDGE('',*,*,#376811,.F.); +#376811 = EDGE_CURVE('',#376772,#376804,#376812,.T.); +#376812 = CIRCLE('',#376813,8.749946518209E-02); +#376813 = AXIS2_PLACEMENT_3D('',#376814,#376815,#376816); +#376814 = CARTESIAN_POINT('',(141.88750053482,-77.99999946518,0.)); +#376815 = DIRECTION('',(0.,0.,-1.)); +#376816 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#376817 = CYLINDRICAL_SURFACE('',#376818,8.749946518209E-02); +#376818 = AXIS2_PLACEMENT_3D('',#376819,#376820,#376821); +#376819 = CARTESIAN_POINT('',(141.88750053482,-77.99999946518,0.)); +#376820 = DIRECTION('',(-0.,-0.,1.)); +#376821 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#376822 = ADVANCED_FACE('',(#376823),#376848,.F.); +#376823 = FACE_BOUND('',#376824,.F.); +#376824 = EDGE_LOOP('',(#376825,#376826,#376834,#376842)); +#376825 = ORIENTED_EDGE('',*,*,#376803,.T.); +#376826 = ORIENTED_EDGE('',*,*,#376827,.T.); +#376827 = EDGE_CURVE('',#376795,#376828,#376830,.T.); +#376828 = VERTEX_POINT('',#376829); +#376829 = CARTESIAN_POINT('',(141.975,-78.45,-4.E-02)); +#376830 = LINE('',#376831,#376832); +#376831 = CARTESIAN_POINT('',(141.975,-78.,-4.E-02)); +#376832 = VECTOR('',#376833,1.); +#376833 = DIRECTION('',(0.,-1.,0.)); +#376834 = ORIENTED_EDGE('',*,*,#376835,.F.); +#376835 = EDGE_CURVE('',#376836,#376828,#376838,.T.); +#376836 = VERTEX_POINT('',#376837); +#376837 = CARTESIAN_POINT('',(141.975,-78.45,0.)); +#376838 = LINE('',#376839,#376840); +#376839 = CARTESIAN_POINT('',(141.975,-78.45,0.)); +#376840 = VECTOR('',#376841,1.); +#376841 = DIRECTION('',(0.,0.,-1.)); +#376842 = ORIENTED_EDGE('',*,*,#376843,.F.); +#376843 = EDGE_CURVE('',#376804,#376836,#376844,.T.); +#376844 = LINE('',#376845,#376846); +#376845 = CARTESIAN_POINT('',(141.975,-78.,0.)); +#376846 = VECTOR('',#376847,1.); +#376847 = DIRECTION('',(0.,-1.,0.)); +#376848 = PLANE('',#376849); +#376849 = AXIS2_PLACEMENT_3D('',#376850,#376851,#376852); +#376850 = CARTESIAN_POINT('',(141.975,-78.,0.)); +#376851 = DIRECTION('',(-1.,-0.,-0.)); +#376852 = DIRECTION('',(0.,-1.,0.)); +#376853 = ADVANCED_FACE('',(#376854),#376881,.T.); +#376854 = FACE_BOUND('',#376855,.F.); +#376855 = EDGE_LOOP('',(#376856,#376857,#376866,#376874)); +#376856 = ORIENTED_EDGE('',*,*,#376835,.T.); +#376857 = ORIENTED_EDGE('',*,*,#376858,.T.); +#376858 = EDGE_CURVE('',#376828,#376859,#376861,.T.); +#376859 = VERTEX_POINT('',#376860); +#376860 = CARTESIAN_POINT('',(141.8875,-78.5375,-4.E-02)); +#376861 = CIRCLE('',#376862,8.749946518206E-02); +#376862 = AXIS2_PLACEMENT_3D('',#376863,#376864,#376865); +#376863 = CARTESIAN_POINT('',(141.88750053482,-78.45000053482,-4.E-02)); +#376864 = DIRECTION('',(0.,0.,-1.)); +#376865 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#376866 = ORIENTED_EDGE('',*,*,#376867,.F.); +#376867 = EDGE_CURVE('',#376868,#376859,#376870,.T.); +#376868 = VERTEX_POINT('',#376869); +#376869 = CARTESIAN_POINT('',(141.8875,-78.5375,0.)); +#376870 = LINE('',#376871,#376872); +#376871 = CARTESIAN_POINT('',(141.8875,-78.5375,0.)); +#376872 = VECTOR('',#376873,1.); +#376873 = DIRECTION('',(0.,0.,-1.)); +#376874 = ORIENTED_EDGE('',*,*,#376875,.F.); +#376875 = EDGE_CURVE('',#376836,#376868,#376876,.T.); +#376876 = CIRCLE('',#376877,8.749946518206E-02); +#376877 = AXIS2_PLACEMENT_3D('',#376878,#376879,#376880); +#376878 = CARTESIAN_POINT('',(141.88750053482,-78.45000053482,0.)); +#376879 = DIRECTION('',(0.,0.,-1.)); +#376880 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#376881 = CYLINDRICAL_SURFACE('',#376882,8.749946518206E-02); +#376882 = AXIS2_PLACEMENT_3D('',#376883,#376884,#376885); +#376883 = CARTESIAN_POINT('',(141.88750053482,-78.45000053482,0.)); +#376884 = DIRECTION('',(-0.,-0.,1.)); +#376885 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#376886 = ADVANCED_FACE('',(#376887),#376912,.F.); +#376887 = FACE_BOUND('',#376888,.F.); +#376888 = EDGE_LOOP('',(#376889,#376890,#376898,#376906)); +#376889 = ORIENTED_EDGE('',*,*,#376867,.T.); +#376890 = ORIENTED_EDGE('',*,*,#376891,.T.); +#376891 = EDGE_CURVE('',#376859,#376892,#376894,.T.); +#376892 = VERTEX_POINT('',#376893); +#376893 = CARTESIAN_POINT('',(141.7125,-78.5375,-4.E-02)); +#376894 = LINE('',#376895,#376896); +#376895 = CARTESIAN_POINT('',(141.8875,-78.5375,-4.E-02)); +#376896 = VECTOR('',#376897,1.); +#376897 = DIRECTION('',(-1.,0.,0.)); +#376898 = ORIENTED_EDGE('',*,*,#376899,.F.); +#376899 = EDGE_CURVE('',#376900,#376892,#376902,.T.); +#376900 = VERTEX_POINT('',#376901); +#376901 = CARTESIAN_POINT('',(141.7125,-78.5375,0.)); +#376902 = LINE('',#376903,#376904); +#376903 = CARTESIAN_POINT('',(141.7125,-78.5375,0.)); +#376904 = VECTOR('',#376905,1.); +#376905 = DIRECTION('',(0.,0.,-1.)); +#376906 = ORIENTED_EDGE('',*,*,#376907,.F.); +#376907 = EDGE_CURVE('',#376868,#376900,#376908,.T.); +#376908 = LINE('',#376909,#376910); +#376909 = CARTESIAN_POINT('',(141.8875,-78.5375,0.)); +#376910 = VECTOR('',#376911,1.); +#376911 = DIRECTION('',(-1.,0.,0.)); +#376912 = PLANE('',#376913); +#376913 = AXIS2_PLACEMENT_3D('',#376914,#376915,#376916); +#376914 = CARTESIAN_POINT('',(141.8875,-78.5375,0.)); +#376915 = DIRECTION('',(0.,1.,0.)); +#376916 = DIRECTION('',(-1.,0.,0.)); +#376917 = ADVANCED_FACE('',(#376918),#376945,.T.); +#376918 = FACE_BOUND('',#376919,.F.); +#376919 = EDGE_LOOP('',(#376920,#376921,#376930,#376938)); +#376920 = ORIENTED_EDGE('',*,*,#376899,.T.); +#376921 = ORIENTED_EDGE('',*,*,#376922,.T.); +#376922 = EDGE_CURVE('',#376892,#376923,#376925,.T.); +#376923 = VERTEX_POINT('',#376924); +#376924 = CARTESIAN_POINT('',(141.625,-78.45,-4.E-02)); +#376925 = CIRCLE('',#376926,8.74994651821E-02); +#376926 = AXIS2_PLACEMENT_3D('',#376927,#376928,#376929); +#376927 = CARTESIAN_POINT('',(141.71249946518,-78.45000053482,-4.E-02)); +#376928 = DIRECTION('',(0.,0.,-1.)); +#376929 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#376930 = ORIENTED_EDGE('',*,*,#376931,.F.); +#376931 = EDGE_CURVE('',#376932,#376923,#376934,.T.); +#376932 = VERTEX_POINT('',#376933); +#376933 = CARTESIAN_POINT('',(141.625,-78.45,0.)); +#376934 = LINE('',#376935,#376936); +#376935 = CARTESIAN_POINT('',(141.625,-78.45,0.)); +#376936 = VECTOR('',#376937,1.); +#376937 = DIRECTION('',(0.,0.,-1.)); +#376938 = ORIENTED_EDGE('',*,*,#376939,.F.); +#376939 = EDGE_CURVE('',#376900,#376932,#376940,.T.); +#376940 = CIRCLE('',#376941,8.74994651821E-02); +#376941 = AXIS2_PLACEMENT_3D('',#376942,#376943,#376944); +#376942 = CARTESIAN_POINT('',(141.71249946518,-78.45000053482,0.)); +#376943 = DIRECTION('',(0.,0.,-1.)); +#376944 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#376945 = CYLINDRICAL_SURFACE('',#376946,8.74994651821E-02); +#376946 = AXIS2_PLACEMENT_3D('',#376947,#376948,#376949); +#376947 = CARTESIAN_POINT('',(141.71249946518,-78.45000053482,0.)); +#376948 = DIRECTION('',(-0.,-0.,1.)); +#376949 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#376950 = ADVANCED_FACE('',(#376951),#376967,.F.); +#376951 = FACE_BOUND('',#376952,.F.); +#376952 = EDGE_LOOP('',(#376953,#376954,#376960,#376961)); +#376953 = ORIENTED_EDGE('',*,*,#376931,.T.); +#376954 = ORIENTED_EDGE('',*,*,#376955,.T.); +#376955 = EDGE_CURVE('',#376923,#376723,#376956,.T.); +#376956 = LINE('',#376957,#376958); +#376957 = CARTESIAN_POINT('',(141.625,-78.45,-4.E-02)); +#376958 = VECTOR('',#376959,1.); +#376959 = DIRECTION('',(0.,1.,0.)); +#376960 = ORIENTED_EDGE('',*,*,#376720,.F.); +#376961 = ORIENTED_EDGE('',*,*,#376962,.F.); +#376962 = EDGE_CURVE('',#376932,#376721,#376963,.T.); +#376963 = LINE('',#376964,#376965); +#376964 = CARTESIAN_POINT('',(141.625,-78.45,0.)); +#376965 = VECTOR('',#376966,1.); +#376966 = DIRECTION('',(0.,1.,0.)); +#376967 = PLANE('',#376968); +#376968 = AXIS2_PLACEMENT_3D('',#376969,#376970,#376971); +#376969 = CARTESIAN_POINT('',(141.625,-78.45,0.)); +#376970 = DIRECTION('',(1.,-0.,0.)); +#376971 = DIRECTION('',(0.,1.,0.)); +#376972 = ADVANCED_FACE('',(#376973),#376983,.F.); +#376973 = FACE_BOUND('',#376974,.F.); +#376974 = EDGE_LOOP('',(#376975,#376976,#376977,#376978,#376979,#376980, + #376981,#376982)); +#376975 = ORIENTED_EDGE('',*,*,#376747,.T.); +#376976 = ORIENTED_EDGE('',*,*,#376779,.T.); +#376977 = ORIENTED_EDGE('',*,*,#376811,.T.); +#376978 = ORIENTED_EDGE('',*,*,#376843,.T.); +#376979 = ORIENTED_EDGE('',*,*,#376875,.T.); +#376980 = ORIENTED_EDGE('',*,*,#376907,.T.); +#376981 = ORIENTED_EDGE('',*,*,#376939,.T.); +#376982 = ORIENTED_EDGE('',*,*,#376962,.T.); +#376983 = PLANE('',#376984); +#376984 = AXIS2_PLACEMENT_3D('',#376985,#376986,#376987); +#376985 = CARTESIAN_POINT('',(0.,0.,0.)); +#376986 = DIRECTION('',(-0.,-0.,-1.)); +#376987 = DIRECTION('',(-1.,0.,0.)); +#376988 = ADVANCED_FACE('',(#376989),#376999,.T.); +#376989 = FACE_BOUND('',#376990,.T.); +#376990 = EDGE_LOOP('',(#376991,#376992,#376993,#376994,#376995,#376996, + #376997,#376998)); +#376991 = ORIENTED_EDGE('',*,*,#376730,.T.); +#376992 = ORIENTED_EDGE('',*,*,#376763,.T.); +#376993 = ORIENTED_EDGE('',*,*,#376794,.T.); +#376994 = ORIENTED_EDGE('',*,*,#376827,.T.); +#376995 = ORIENTED_EDGE('',*,*,#376858,.T.); +#376996 = ORIENTED_EDGE('',*,*,#376891,.T.); +#376997 = ORIENTED_EDGE('',*,*,#376922,.T.); +#376998 = ORIENTED_EDGE('',*,*,#376955,.T.); +#376999 = PLANE('',#377000); +#377000 = AXIS2_PLACEMENT_3D('',#377001,#377002,#377003); +#377001 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#377002 = DIRECTION('',(-0.,-0.,-1.)); +#377003 = DIRECTION('',(-1.,0.,0.)); +#377004 = MANIFOLD_SOLID_BREP('',#377005); +#377005 = CLOSED_SHELL('',(#377006,#377048,#377079,#377112,#377143, + #377176,#377207,#377240,#377262,#377278)); +#377006 = ADVANCED_FACE('',(#377007),#377043,.T.); +#377007 = FACE_BOUND('',#377008,.F.); +#377008 = EDGE_LOOP('',(#377009,#377019,#377028,#377036)); +#377009 = ORIENTED_EDGE('',*,*,#377010,.T.); +#377010 = EDGE_CURVE('',#377011,#377013,#377015,.T.); +#377011 = VERTEX_POINT('',#377012); +#377012 = CARTESIAN_POINT('',(139.825,-77.975,0.)); +#377013 = VERTEX_POINT('',#377014); +#377014 = CARTESIAN_POINT('',(139.825,-77.975,-4.E-02)); +#377015 = LINE('',#377016,#377017); +#377016 = CARTESIAN_POINT('',(139.825,-77.975,0.)); +#377017 = VECTOR('',#377018,1.); +#377018 = DIRECTION('',(0.,0.,-1.)); +#377019 = ORIENTED_EDGE('',*,*,#377020,.T.); +#377020 = EDGE_CURVE('',#377013,#377021,#377023,.T.); +#377021 = VERTEX_POINT('',#377022); +#377022 = CARTESIAN_POINT('',(139.9125,-77.8875,-4.E-02)); +#377023 = CIRCLE('',#377024,8.74994651821E-02); +#377024 = AXIS2_PLACEMENT_3D('',#377025,#377026,#377027); +#377025 = CARTESIAN_POINT('',(139.91249946518,-77.97499946518,-4.E-02)); +#377026 = DIRECTION('',(0.,0.,-1.)); +#377027 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377028 = ORIENTED_EDGE('',*,*,#377029,.F.); +#377029 = EDGE_CURVE('',#377030,#377021,#377032,.T.); +#377030 = VERTEX_POINT('',#377031); +#377031 = CARTESIAN_POINT('',(139.9125,-77.8875,0.)); +#377032 = LINE('',#377033,#377034); +#377033 = CARTESIAN_POINT('',(139.9125,-77.8875,0.)); +#377034 = VECTOR('',#377035,1.); +#377035 = DIRECTION('',(0.,0.,-1.)); +#377036 = ORIENTED_EDGE('',*,*,#377037,.F.); +#377037 = EDGE_CURVE('',#377011,#377030,#377038,.T.); +#377038 = CIRCLE('',#377039,8.74994651821E-02); +#377039 = AXIS2_PLACEMENT_3D('',#377040,#377041,#377042); +#377040 = CARTESIAN_POINT('',(139.91249946518,-77.97499946518,0.)); +#377041 = DIRECTION('',(0.,0.,-1.)); +#377042 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377043 = CYLINDRICAL_SURFACE('',#377044,8.74994651821E-02); +#377044 = AXIS2_PLACEMENT_3D('',#377045,#377046,#377047); +#377045 = CARTESIAN_POINT('',(139.91249946518,-77.97499946518,0.)); +#377046 = DIRECTION('',(-0.,-0.,1.)); +#377047 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377048 = ADVANCED_FACE('',(#377049),#377074,.F.); +#377049 = FACE_BOUND('',#377050,.F.); +#377050 = EDGE_LOOP('',(#377051,#377052,#377060,#377068)); +#377051 = ORIENTED_EDGE('',*,*,#377029,.T.); +#377052 = ORIENTED_EDGE('',*,*,#377053,.T.); +#377053 = EDGE_CURVE('',#377021,#377054,#377056,.T.); +#377054 = VERTEX_POINT('',#377055); +#377055 = CARTESIAN_POINT('',(140.3625,-77.8875,-4.E-02)); +#377056 = LINE('',#377057,#377058); +#377057 = CARTESIAN_POINT('',(139.9125,-77.8875,-4.E-02)); +#377058 = VECTOR('',#377059,1.); +#377059 = DIRECTION('',(1.,0.,0.)); +#377060 = ORIENTED_EDGE('',*,*,#377061,.F.); +#377061 = EDGE_CURVE('',#377062,#377054,#377064,.T.); +#377062 = VERTEX_POINT('',#377063); +#377063 = CARTESIAN_POINT('',(140.3625,-77.8875,0.)); +#377064 = LINE('',#377065,#377066); +#377065 = CARTESIAN_POINT('',(140.3625,-77.8875,0.)); +#377066 = VECTOR('',#377067,1.); +#377067 = DIRECTION('',(0.,0.,-1.)); +#377068 = ORIENTED_EDGE('',*,*,#377069,.F.); +#377069 = EDGE_CURVE('',#377030,#377062,#377070,.T.); +#377070 = LINE('',#377071,#377072); +#377071 = CARTESIAN_POINT('',(139.9125,-77.8875,0.)); +#377072 = VECTOR('',#377073,1.); +#377073 = DIRECTION('',(1.,0.,0.)); +#377074 = PLANE('',#377075); +#377075 = AXIS2_PLACEMENT_3D('',#377076,#377077,#377078); +#377076 = CARTESIAN_POINT('',(139.9125,-77.8875,0.)); +#377077 = DIRECTION('',(0.,-1.,0.)); +#377078 = DIRECTION('',(1.,0.,0.)); +#377079 = ADVANCED_FACE('',(#377080),#377107,.T.); +#377080 = FACE_BOUND('',#377081,.F.); +#377081 = EDGE_LOOP('',(#377082,#377083,#377092,#377100)); +#377082 = ORIENTED_EDGE('',*,*,#377061,.T.); +#377083 = ORIENTED_EDGE('',*,*,#377084,.T.); +#377084 = EDGE_CURVE('',#377054,#377085,#377087,.T.); +#377085 = VERTEX_POINT('',#377086); +#377086 = CARTESIAN_POINT('',(140.45,-77.975,-4.E-02)); +#377087 = CIRCLE('',#377088,8.749946518204E-02); +#377088 = AXIS2_PLACEMENT_3D('',#377089,#377090,#377091); +#377089 = CARTESIAN_POINT('',(140.36250053482,-77.97499946518,-4.E-02)); +#377090 = DIRECTION('',(0.,0.,-1.)); +#377091 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377092 = ORIENTED_EDGE('',*,*,#377093,.F.); +#377093 = EDGE_CURVE('',#377094,#377085,#377096,.T.); +#377094 = VERTEX_POINT('',#377095); +#377095 = CARTESIAN_POINT('',(140.45,-77.975,0.)); +#377096 = LINE('',#377097,#377098); +#377097 = CARTESIAN_POINT('',(140.45,-77.975,0.)); +#377098 = VECTOR('',#377099,1.); +#377099 = DIRECTION('',(0.,0.,-1.)); +#377100 = ORIENTED_EDGE('',*,*,#377101,.F.); +#377101 = EDGE_CURVE('',#377062,#377094,#377102,.T.); +#377102 = CIRCLE('',#377103,8.749946518204E-02); +#377103 = AXIS2_PLACEMENT_3D('',#377104,#377105,#377106); +#377104 = CARTESIAN_POINT('',(140.36250053482,-77.97499946518,0.)); +#377105 = DIRECTION('',(0.,0.,-1.)); +#377106 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377107 = CYLINDRICAL_SURFACE('',#377108,8.749946518204E-02); +#377108 = AXIS2_PLACEMENT_3D('',#377109,#377110,#377111); +#377109 = CARTESIAN_POINT('',(140.36250053482,-77.97499946518,0.)); +#377110 = DIRECTION('',(-0.,-0.,1.)); +#377111 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377112 = ADVANCED_FACE('',(#377113),#377138,.F.); +#377113 = FACE_BOUND('',#377114,.F.); +#377114 = EDGE_LOOP('',(#377115,#377116,#377124,#377132)); +#377115 = ORIENTED_EDGE('',*,*,#377093,.T.); +#377116 = ORIENTED_EDGE('',*,*,#377117,.T.); +#377117 = EDGE_CURVE('',#377085,#377118,#377120,.T.); +#377118 = VERTEX_POINT('',#377119); +#377119 = CARTESIAN_POINT('',(140.45,-78.15,-4.E-02)); +#377120 = LINE('',#377121,#377122); +#377121 = CARTESIAN_POINT('',(140.45,-77.975,-4.E-02)); +#377122 = VECTOR('',#377123,1.); +#377123 = DIRECTION('',(0.,-1.,0.)); +#377124 = ORIENTED_EDGE('',*,*,#377125,.F.); +#377125 = EDGE_CURVE('',#377126,#377118,#377128,.T.); +#377126 = VERTEX_POINT('',#377127); +#377127 = CARTESIAN_POINT('',(140.45,-78.15,0.)); +#377128 = LINE('',#377129,#377130); +#377129 = CARTESIAN_POINT('',(140.45,-78.15,0.)); +#377130 = VECTOR('',#377131,1.); +#377131 = DIRECTION('',(0.,0.,-1.)); +#377132 = ORIENTED_EDGE('',*,*,#377133,.F.); +#377133 = EDGE_CURVE('',#377094,#377126,#377134,.T.); +#377134 = LINE('',#377135,#377136); +#377135 = CARTESIAN_POINT('',(140.45,-77.975,0.)); +#377136 = VECTOR('',#377137,1.); +#377137 = DIRECTION('',(0.,-1.,0.)); +#377138 = PLANE('',#377139); +#377139 = AXIS2_PLACEMENT_3D('',#377140,#377141,#377142); +#377140 = CARTESIAN_POINT('',(140.45,-77.975,0.)); +#377141 = DIRECTION('',(-1.,-0.,-0.)); +#377142 = DIRECTION('',(0.,-1.,0.)); +#377143 = ADVANCED_FACE('',(#377144),#377171,.T.); +#377144 = FACE_BOUND('',#377145,.F.); +#377145 = EDGE_LOOP('',(#377146,#377147,#377156,#377164)); +#377146 = ORIENTED_EDGE('',*,*,#377125,.T.); +#377147 = ORIENTED_EDGE('',*,*,#377148,.T.); +#377148 = EDGE_CURVE('',#377118,#377149,#377151,.T.); +#377149 = VERTEX_POINT('',#377150); +#377150 = CARTESIAN_POINT('',(140.3625,-78.2375,-4.E-02)); +#377151 = CIRCLE('',#377152,8.749946518204E-02); +#377152 = AXIS2_PLACEMENT_3D('',#377153,#377154,#377155); +#377153 = CARTESIAN_POINT('',(140.36250053482,-78.15000053482,-4.E-02)); +#377154 = DIRECTION('',(0.,0.,-1.)); +#377155 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#377156 = ORIENTED_EDGE('',*,*,#377157,.F.); +#377157 = EDGE_CURVE('',#377158,#377149,#377160,.T.); +#377158 = VERTEX_POINT('',#377159); +#377159 = CARTESIAN_POINT('',(140.3625,-78.2375,0.)); +#377160 = LINE('',#377161,#377162); +#377161 = CARTESIAN_POINT('',(140.3625,-78.2375,0.)); +#377162 = VECTOR('',#377163,1.); +#377163 = DIRECTION('',(0.,0.,-1.)); +#377164 = ORIENTED_EDGE('',*,*,#377165,.F.); +#377165 = EDGE_CURVE('',#377126,#377158,#377166,.T.); +#377166 = CIRCLE('',#377167,8.749946518204E-02); +#377167 = AXIS2_PLACEMENT_3D('',#377168,#377169,#377170); +#377168 = CARTESIAN_POINT('',(140.36250053482,-78.15000053482,0.)); +#377169 = DIRECTION('',(0.,0.,-1.)); +#377170 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#377171 = CYLINDRICAL_SURFACE('',#377172,8.749946518204E-02); +#377172 = AXIS2_PLACEMENT_3D('',#377173,#377174,#377175); +#377173 = CARTESIAN_POINT('',(140.36250053482,-78.15000053482,0.)); +#377174 = DIRECTION('',(-0.,-0.,1.)); +#377175 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#377176 = ADVANCED_FACE('',(#377177),#377202,.F.); +#377177 = FACE_BOUND('',#377178,.F.); +#377178 = EDGE_LOOP('',(#377179,#377180,#377188,#377196)); +#377179 = ORIENTED_EDGE('',*,*,#377157,.T.); +#377180 = ORIENTED_EDGE('',*,*,#377181,.T.); +#377181 = EDGE_CURVE('',#377149,#377182,#377184,.T.); +#377182 = VERTEX_POINT('',#377183); +#377183 = CARTESIAN_POINT('',(139.9125,-78.2375,-4.E-02)); +#377184 = LINE('',#377185,#377186); +#377185 = CARTESIAN_POINT('',(140.3625,-78.2375,-4.E-02)); +#377186 = VECTOR('',#377187,1.); +#377187 = DIRECTION('',(-1.,0.,0.)); +#377188 = ORIENTED_EDGE('',*,*,#377189,.F.); +#377189 = EDGE_CURVE('',#377190,#377182,#377192,.T.); +#377190 = VERTEX_POINT('',#377191); +#377191 = CARTESIAN_POINT('',(139.9125,-78.2375,0.)); +#377192 = LINE('',#377193,#377194); +#377193 = CARTESIAN_POINT('',(139.9125,-78.2375,0.)); +#377194 = VECTOR('',#377195,1.); +#377195 = DIRECTION('',(0.,0.,-1.)); +#377196 = ORIENTED_EDGE('',*,*,#377197,.F.); +#377197 = EDGE_CURVE('',#377158,#377190,#377198,.T.); +#377198 = LINE('',#377199,#377200); +#377199 = CARTESIAN_POINT('',(140.3625,-78.2375,0.)); +#377200 = VECTOR('',#377201,1.); +#377201 = DIRECTION('',(-1.,0.,0.)); +#377202 = PLANE('',#377203); +#377203 = AXIS2_PLACEMENT_3D('',#377204,#377205,#377206); +#377204 = CARTESIAN_POINT('',(140.3625,-78.2375,0.)); +#377205 = DIRECTION('',(0.,1.,0.)); +#377206 = DIRECTION('',(-1.,0.,0.)); +#377207 = ADVANCED_FACE('',(#377208),#377235,.T.); +#377208 = FACE_BOUND('',#377209,.F.); +#377209 = EDGE_LOOP('',(#377210,#377211,#377220,#377228)); +#377210 = ORIENTED_EDGE('',*,*,#377189,.T.); +#377211 = ORIENTED_EDGE('',*,*,#377212,.T.); +#377212 = EDGE_CURVE('',#377182,#377213,#377215,.T.); +#377213 = VERTEX_POINT('',#377214); +#377214 = CARTESIAN_POINT('',(139.825,-78.15,-4.E-02)); +#377215 = CIRCLE('',#377216,8.74994651821E-02); +#377216 = AXIS2_PLACEMENT_3D('',#377217,#377218,#377219); +#377217 = CARTESIAN_POINT('',(139.91249946518,-78.15000053482,-4.E-02)); +#377218 = DIRECTION('',(0.,0.,-1.)); +#377219 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#377220 = ORIENTED_EDGE('',*,*,#377221,.F.); +#377221 = EDGE_CURVE('',#377222,#377213,#377224,.T.); +#377222 = VERTEX_POINT('',#377223); +#377223 = CARTESIAN_POINT('',(139.825,-78.15,0.)); +#377224 = LINE('',#377225,#377226); +#377225 = CARTESIAN_POINT('',(139.825,-78.15,0.)); +#377226 = VECTOR('',#377227,1.); +#377227 = DIRECTION('',(0.,0.,-1.)); +#377228 = ORIENTED_EDGE('',*,*,#377229,.F.); +#377229 = EDGE_CURVE('',#377190,#377222,#377230,.T.); +#377230 = CIRCLE('',#377231,8.74994651821E-02); +#377231 = AXIS2_PLACEMENT_3D('',#377232,#377233,#377234); +#377232 = CARTESIAN_POINT('',(139.91249946518,-78.15000053482,0.)); +#377233 = DIRECTION('',(0.,0.,-1.)); +#377234 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#377235 = CYLINDRICAL_SURFACE('',#377236,8.74994651821E-02); +#377236 = AXIS2_PLACEMENT_3D('',#377237,#377238,#377239); +#377237 = CARTESIAN_POINT('',(139.91249946518,-78.15000053482,0.)); +#377238 = DIRECTION('',(-0.,-0.,1.)); +#377239 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#377240 = ADVANCED_FACE('',(#377241),#377257,.F.); +#377241 = FACE_BOUND('',#377242,.F.); +#377242 = EDGE_LOOP('',(#377243,#377244,#377250,#377251)); +#377243 = ORIENTED_EDGE('',*,*,#377221,.T.); +#377244 = ORIENTED_EDGE('',*,*,#377245,.T.); +#377245 = EDGE_CURVE('',#377213,#377013,#377246,.T.); +#377246 = LINE('',#377247,#377248); +#377247 = CARTESIAN_POINT('',(139.825,-78.15,-4.E-02)); +#377248 = VECTOR('',#377249,1.); +#377249 = DIRECTION('',(0.,1.,0.)); +#377250 = ORIENTED_EDGE('',*,*,#377010,.F.); +#377251 = ORIENTED_EDGE('',*,*,#377252,.F.); +#377252 = EDGE_CURVE('',#377222,#377011,#377253,.T.); +#377253 = LINE('',#377254,#377255); +#377254 = CARTESIAN_POINT('',(139.825,-78.15,0.)); +#377255 = VECTOR('',#377256,1.); +#377256 = DIRECTION('',(0.,1.,0.)); +#377257 = PLANE('',#377258); +#377258 = AXIS2_PLACEMENT_3D('',#377259,#377260,#377261); +#377259 = CARTESIAN_POINT('',(139.825,-78.15,0.)); +#377260 = DIRECTION('',(1.,-0.,0.)); +#377261 = DIRECTION('',(0.,1.,0.)); +#377262 = ADVANCED_FACE('',(#377263),#377273,.F.); +#377263 = FACE_BOUND('',#377264,.F.); +#377264 = EDGE_LOOP('',(#377265,#377266,#377267,#377268,#377269,#377270, + #377271,#377272)); +#377265 = ORIENTED_EDGE('',*,*,#377037,.T.); +#377266 = ORIENTED_EDGE('',*,*,#377069,.T.); +#377267 = ORIENTED_EDGE('',*,*,#377101,.T.); +#377268 = ORIENTED_EDGE('',*,*,#377133,.T.); +#377269 = ORIENTED_EDGE('',*,*,#377165,.T.); +#377270 = ORIENTED_EDGE('',*,*,#377197,.T.); +#377271 = ORIENTED_EDGE('',*,*,#377229,.T.); +#377272 = ORIENTED_EDGE('',*,*,#377252,.T.); +#377273 = PLANE('',#377274); +#377274 = AXIS2_PLACEMENT_3D('',#377275,#377276,#377277); +#377275 = CARTESIAN_POINT('',(0.,0.,0.)); +#377276 = DIRECTION('',(-0.,-0.,-1.)); +#377277 = DIRECTION('',(-1.,0.,0.)); +#377278 = ADVANCED_FACE('',(#377279),#377289,.T.); +#377279 = FACE_BOUND('',#377280,.T.); +#377280 = EDGE_LOOP('',(#377281,#377282,#377283,#377284,#377285,#377286, + #377287,#377288)); +#377281 = ORIENTED_EDGE('',*,*,#377020,.T.); +#377282 = ORIENTED_EDGE('',*,*,#377053,.T.); +#377283 = ORIENTED_EDGE('',*,*,#377084,.T.); +#377284 = ORIENTED_EDGE('',*,*,#377117,.T.); +#377285 = ORIENTED_EDGE('',*,*,#377148,.T.); +#377286 = ORIENTED_EDGE('',*,*,#377181,.T.); +#377287 = ORIENTED_EDGE('',*,*,#377212,.T.); +#377288 = ORIENTED_EDGE('',*,*,#377245,.T.); +#377289 = PLANE('',#377290); +#377290 = AXIS2_PLACEMENT_3D('',#377291,#377292,#377293); +#377291 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#377292 = DIRECTION('',(-0.,-0.,-1.)); +#377293 = DIRECTION('',(-1.,0.,0.)); +#377294 = MANIFOLD_SOLID_BREP('',#377295); +#377295 = CLOSED_SHELL('',(#377296,#377338,#377369,#377402,#377433, + #377466,#377497,#377530,#377552,#377568)); +#377296 = ADVANCED_FACE('',(#377297),#377333,.T.); +#377297 = FACE_BOUND('',#377298,.F.); +#377298 = EDGE_LOOP('',(#377299,#377309,#377318,#377326)); +#377299 = ORIENTED_EDGE('',*,*,#377300,.T.); +#377300 = EDGE_CURVE('',#377301,#377303,#377305,.T.); +#377301 = VERTEX_POINT('',#377302); +#377302 = CARTESIAN_POINT('',(140.625,-76.175,0.)); +#377303 = VERTEX_POINT('',#377304); +#377304 = CARTESIAN_POINT('',(140.625,-76.175,-4.E-02)); +#377305 = LINE('',#377306,#377307); +#377306 = CARTESIAN_POINT('',(140.625,-76.175,0.)); +#377307 = VECTOR('',#377308,1.); +#377308 = DIRECTION('',(0.,0.,-1.)); +#377309 = ORIENTED_EDGE('',*,*,#377310,.T.); +#377310 = EDGE_CURVE('',#377303,#377311,#377313,.T.); +#377311 = VERTEX_POINT('',#377312); +#377312 = CARTESIAN_POINT('',(140.7125,-76.0875,-4.E-02)); +#377313 = CIRCLE('',#377314,8.74994651821E-02); +#377314 = AXIS2_PLACEMENT_3D('',#377315,#377316,#377317); +#377315 = CARTESIAN_POINT('',(140.71249946518,-76.17499946518,-4.E-02)); +#377316 = DIRECTION('',(0.,0.,-1.)); +#377317 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377318 = ORIENTED_EDGE('',*,*,#377319,.F.); +#377319 = EDGE_CURVE('',#377320,#377311,#377322,.T.); +#377320 = VERTEX_POINT('',#377321); +#377321 = CARTESIAN_POINT('',(140.7125,-76.0875,0.)); +#377322 = LINE('',#377323,#377324); +#377323 = CARTESIAN_POINT('',(140.7125,-76.0875,0.)); +#377324 = VECTOR('',#377325,1.); +#377325 = DIRECTION('',(0.,0.,-1.)); +#377326 = ORIENTED_EDGE('',*,*,#377327,.F.); +#377327 = EDGE_CURVE('',#377301,#377320,#377328,.T.); +#377328 = CIRCLE('',#377329,8.74994651821E-02); +#377329 = AXIS2_PLACEMENT_3D('',#377330,#377331,#377332); +#377330 = CARTESIAN_POINT('',(140.71249946518,-76.17499946518,0.)); +#377331 = DIRECTION('',(0.,0.,-1.)); +#377332 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377333 = CYLINDRICAL_SURFACE('',#377334,8.74994651821E-02); +#377334 = AXIS2_PLACEMENT_3D('',#377335,#377336,#377337); +#377335 = CARTESIAN_POINT('',(140.71249946518,-76.17499946518,0.)); +#377336 = DIRECTION('',(-0.,-0.,1.)); +#377337 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#377338 = ADVANCED_FACE('',(#377339),#377364,.F.); +#377339 = FACE_BOUND('',#377340,.F.); +#377340 = EDGE_LOOP('',(#377341,#377342,#377350,#377358)); +#377341 = ORIENTED_EDGE('',*,*,#377319,.T.); +#377342 = ORIENTED_EDGE('',*,*,#377343,.T.); +#377343 = EDGE_CURVE('',#377311,#377344,#377346,.T.); +#377344 = VERTEX_POINT('',#377345); +#377345 = CARTESIAN_POINT('',(140.8875,-76.0875,-4.E-02)); +#377346 = LINE('',#377347,#377348); +#377347 = CARTESIAN_POINT('',(140.7125,-76.0875,-4.E-02)); +#377348 = VECTOR('',#377349,1.); +#377349 = DIRECTION('',(1.,0.,0.)); +#377350 = ORIENTED_EDGE('',*,*,#377351,.F.); +#377351 = EDGE_CURVE('',#377352,#377344,#377354,.T.); +#377352 = VERTEX_POINT('',#377353); +#377353 = CARTESIAN_POINT('',(140.8875,-76.0875,0.)); +#377354 = LINE('',#377355,#377356); +#377355 = CARTESIAN_POINT('',(140.8875,-76.0875,0.)); +#377356 = VECTOR('',#377357,1.); +#377357 = DIRECTION('',(0.,0.,-1.)); +#377358 = ORIENTED_EDGE('',*,*,#377359,.F.); +#377359 = EDGE_CURVE('',#377320,#377352,#377360,.T.); +#377360 = LINE('',#377361,#377362); +#377361 = CARTESIAN_POINT('',(140.7125,-76.0875,0.)); +#377362 = VECTOR('',#377363,1.); +#377363 = DIRECTION('',(1.,0.,0.)); +#377364 = PLANE('',#377365); +#377365 = AXIS2_PLACEMENT_3D('',#377366,#377367,#377368); +#377366 = CARTESIAN_POINT('',(140.7125,-76.0875,0.)); +#377367 = DIRECTION('',(0.,-1.,0.)); +#377368 = DIRECTION('',(1.,0.,0.)); +#377369 = ADVANCED_FACE('',(#377370),#377397,.T.); +#377370 = FACE_BOUND('',#377371,.F.); +#377371 = EDGE_LOOP('',(#377372,#377373,#377382,#377390)); +#377372 = ORIENTED_EDGE('',*,*,#377351,.T.); +#377373 = ORIENTED_EDGE('',*,*,#377374,.T.); +#377374 = EDGE_CURVE('',#377344,#377375,#377377,.T.); +#377375 = VERTEX_POINT('',#377376); +#377376 = CARTESIAN_POINT('',(140.975,-76.175,-4.E-02)); +#377377 = CIRCLE('',#377378,8.749946518206E-02); +#377378 = AXIS2_PLACEMENT_3D('',#377379,#377380,#377381); +#377379 = CARTESIAN_POINT('',(140.88750053482,-76.17499946518,-4.E-02)); +#377380 = DIRECTION('',(0.,0.,-1.)); +#377381 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377382 = ORIENTED_EDGE('',*,*,#377383,.F.); +#377383 = EDGE_CURVE('',#377384,#377375,#377386,.T.); +#377384 = VERTEX_POINT('',#377385); +#377385 = CARTESIAN_POINT('',(140.975,-76.175,0.)); +#377386 = LINE('',#377387,#377388); +#377387 = CARTESIAN_POINT('',(140.975,-76.175,0.)); +#377388 = VECTOR('',#377389,1.); +#377389 = DIRECTION('',(0.,0.,-1.)); +#377390 = ORIENTED_EDGE('',*,*,#377391,.F.); +#377391 = EDGE_CURVE('',#377352,#377384,#377392,.T.); +#377392 = CIRCLE('',#377393,8.749946518206E-02); +#377393 = AXIS2_PLACEMENT_3D('',#377394,#377395,#377396); +#377394 = CARTESIAN_POINT('',(140.88750053482,-76.17499946518,0.)); +#377395 = DIRECTION('',(0.,0.,-1.)); +#377396 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377397 = CYLINDRICAL_SURFACE('',#377398,8.749946518206E-02); +#377398 = AXIS2_PLACEMENT_3D('',#377399,#377400,#377401); +#377399 = CARTESIAN_POINT('',(140.88750053482,-76.17499946518,0.)); +#377400 = DIRECTION('',(-0.,-0.,1.)); +#377401 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#377402 = ADVANCED_FACE('',(#377403),#377428,.F.); +#377403 = FACE_BOUND('',#377404,.F.); +#377404 = EDGE_LOOP('',(#377405,#377406,#377414,#377422)); +#377405 = ORIENTED_EDGE('',*,*,#377383,.T.); +#377406 = ORIENTED_EDGE('',*,*,#377407,.T.); +#377407 = EDGE_CURVE('',#377375,#377408,#377410,.T.); +#377408 = VERTEX_POINT('',#377409); +#377409 = CARTESIAN_POINT('',(140.975,-76.625,-4.E-02)); +#377410 = LINE('',#377411,#377412); +#377411 = CARTESIAN_POINT('',(140.975,-76.175,-4.E-02)); +#377412 = VECTOR('',#377413,1.); +#377413 = DIRECTION('',(0.,-1.,0.)); +#377414 = ORIENTED_EDGE('',*,*,#377415,.F.); +#377415 = EDGE_CURVE('',#377416,#377408,#377418,.T.); +#377416 = VERTEX_POINT('',#377417); +#377417 = CARTESIAN_POINT('',(140.975,-76.625,0.)); +#377418 = LINE('',#377419,#377420); +#377419 = CARTESIAN_POINT('',(140.975,-76.625,0.)); +#377420 = VECTOR('',#377421,1.); +#377421 = DIRECTION('',(0.,0.,-1.)); +#377422 = ORIENTED_EDGE('',*,*,#377423,.F.); +#377423 = EDGE_CURVE('',#377384,#377416,#377424,.T.); +#377424 = LINE('',#377425,#377426); +#377425 = CARTESIAN_POINT('',(140.975,-76.175,0.)); +#377426 = VECTOR('',#377427,1.); +#377427 = DIRECTION('',(0.,-1.,0.)); +#377428 = PLANE('',#377429); +#377429 = AXIS2_PLACEMENT_3D('',#377430,#377431,#377432); +#377430 = CARTESIAN_POINT('',(140.975,-76.175,0.)); +#377431 = DIRECTION('',(-1.,-0.,-0.)); +#377432 = DIRECTION('',(0.,-1.,0.)); +#377433 = ADVANCED_FACE('',(#377434),#377461,.T.); +#377434 = FACE_BOUND('',#377435,.F.); +#377435 = EDGE_LOOP('',(#377436,#377437,#377446,#377454)); +#377436 = ORIENTED_EDGE('',*,*,#377415,.T.); +#377437 = ORIENTED_EDGE('',*,*,#377438,.T.); +#377438 = EDGE_CURVE('',#377408,#377439,#377441,.T.); +#377439 = VERTEX_POINT('',#377440); +#377440 = CARTESIAN_POINT('',(140.8875,-76.7125,-4.E-02)); +#377441 = CIRCLE('',#377442,8.749946518209E-02); +#377442 = AXIS2_PLACEMENT_3D('',#377443,#377444,#377445); +#377443 = CARTESIAN_POINT('',(140.88750053482,-76.62500053482,-4.E-02)); +#377444 = DIRECTION('',(0.,0.,-1.)); +#377445 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#377446 = ORIENTED_EDGE('',*,*,#377447,.F.); +#377447 = EDGE_CURVE('',#377448,#377439,#377450,.T.); +#377448 = VERTEX_POINT('',#377449); +#377449 = CARTESIAN_POINT('',(140.8875,-76.7125,0.)); +#377450 = LINE('',#377451,#377452); +#377451 = CARTESIAN_POINT('',(140.8875,-76.7125,0.)); +#377452 = VECTOR('',#377453,1.); +#377453 = DIRECTION('',(0.,0.,-1.)); +#377454 = ORIENTED_EDGE('',*,*,#377455,.F.); +#377455 = EDGE_CURVE('',#377416,#377448,#377456,.T.); +#377456 = CIRCLE('',#377457,8.749946518209E-02); +#377457 = AXIS2_PLACEMENT_3D('',#377458,#377459,#377460); +#377458 = CARTESIAN_POINT('',(140.88750053482,-76.62500053482,0.)); +#377459 = DIRECTION('',(0.,0.,-1.)); +#377460 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#377461 = CYLINDRICAL_SURFACE('',#377462,8.749946518209E-02); +#377462 = AXIS2_PLACEMENT_3D('',#377463,#377464,#377465); +#377463 = CARTESIAN_POINT('',(140.88750053482,-76.62500053482,0.)); +#377464 = DIRECTION('',(-0.,-0.,1.)); +#377465 = DIRECTION('',(0.999999999981,6.112260934916E-06,0.)); +#377466 = ADVANCED_FACE('',(#377467),#377492,.F.); +#377467 = FACE_BOUND('',#377468,.F.); +#377468 = EDGE_LOOP('',(#377469,#377470,#377478,#377486)); +#377469 = ORIENTED_EDGE('',*,*,#377447,.T.); +#377470 = ORIENTED_EDGE('',*,*,#377471,.T.); +#377471 = EDGE_CURVE('',#377439,#377472,#377474,.T.); +#377472 = VERTEX_POINT('',#377473); +#377473 = CARTESIAN_POINT('',(140.7125,-76.7125,-4.E-02)); +#377474 = LINE('',#377475,#377476); +#377475 = CARTESIAN_POINT('',(140.8875,-76.7125,-4.E-02)); +#377476 = VECTOR('',#377477,1.); +#377477 = DIRECTION('',(-1.,0.,0.)); +#377478 = ORIENTED_EDGE('',*,*,#377479,.F.); +#377479 = EDGE_CURVE('',#377480,#377472,#377482,.T.); +#377480 = VERTEX_POINT('',#377481); +#377481 = CARTESIAN_POINT('',(140.7125,-76.7125,0.)); +#377482 = LINE('',#377483,#377484); +#377483 = CARTESIAN_POINT('',(140.7125,-76.7125,0.)); +#377484 = VECTOR('',#377485,1.); +#377485 = DIRECTION('',(0.,0.,-1.)); +#377486 = ORIENTED_EDGE('',*,*,#377487,.F.); +#377487 = EDGE_CURVE('',#377448,#377480,#377488,.T.); +#377488 = LINE('',#377489,#377490); +#377489 = CARTESIAN_POINT('',(140.8875,-76.7125,0.)); +#377490 = VECTOR('',#377491,1.); +#377491 = DIRECTION('',(-1.,0.,0.)); +#377492 = PLANE('',#377493); +#377493 = AXIS2_PLACEMENT_3D('',#377494,#377495,#377496); +#377494 = CARTESIAN_POINT('',(140.8875,-76.7125,0.)); +#377495 = DIRECTION('',(0.,1.,0.)); +#377496 = DIRECTION('',(-1.,0.,0.)); +#377497 = ADVANCED_FACE('',(#377498),#377525,.T.); +#377498 = FACE_BOUND('',#377499,.F.); +#377499 = EDGE_LOOP('',(#377500,#377501,#377510,#377518)); +#377500 = ORIENTED_EDGE('',*,*,#377479,.T.); +#377501 = ORIENTED_EDGE('',*,*,#377502,.T.); +#377502 = EDGE_CURVE('',#377472,#377503,#377505,.T.); +#377503 = VERTEX_POINT('',#377504); +#377504 = CARTESIAN_POINT('',(140.625,-76.625,-4.E-02)); +#377505 = CIRCLE('',#377506,8.749946518212E-02); +#377506 = AXIS2_PLACEMENT_3D('',#377507,#377508,#377509); +#377507 = CARTESIAN_POINT('',(140.71249946518,-76.62500053482,-4.E-02)); +#377508 = DIRECTION('',(0.,0.,-1.)); +#377509 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#377510 = ORIENTED_EDGE('',*,*,#377511,.F.); +#377511 = EDGE_CURVE('',#377512,#377503,#377514,.T.); +#377512 = VERTEX_POINT('',#377513); +#377513 = CARTESIAN_POINT('',(140.625,-76.625,0.)); +#377514 = LINE('',#377515,#377516); +#377515 = CARTESIAN_POINT('',(140.625,-76.625,0.)); +#377516 = VECTOR('',#377517,1.); +#377517 = DIRECTION('',(0.,0.,-1.)); +#377518 = ORIENTED_EDGE('',*,*,#377519,.F.); +#377519 = EDGE_CURVE('',#377480,#377512,#377520,.T.); +#377520 = CIRCLE('',#377521,8.749946518212E-02); +#377521 = AXIS2_PLACEMENT_3D('',#377522,#377523,#377524); +#377522 = CARTESIAN_POINT('',(140.71249946518,-76.62500053482,0.)); +#377523 = DIRECTION('',(0.,0.,-1.)); +#377524 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#377525 = CYLINDRICAL_SURFACE('',#377526,8.749946518212E-02); +#377526 = AXIS2_PLACEMENT_3D('',#377527,#377528,#377529); +#377527 = CARTESIAN_POINT('',(140.71249946518,-76.62500053482,0.)); +#377528 = DIRECTION('',(-0.,-0.,1.)); +#377529 = DIRECTION('',(6.112260447681E-06,-0.999999999981,0.)); +#377530 = ADVANCED_FACE('',(#377531),#377547,.F.); +#377531 = FACE_BOUND('',#377532,.F.); +#377532 = EDGE_LOOP('',(#377533,#377534,#377540,#377541)); +#377533 = ORIENTED_EDGE('',*,*,#377511,.T.); +#377534 = ORIENTED_EDGE('',*,*,#377535,.T.); +#377535 = EDGE_CURVE('',#377503,#377303,#377536,.T.); +#377536 = LINE('',#377537,#377538); +#377537 = CARTESIAN_POINT('',(140.625,-76.625,-4.E-02)); +#377538 = VECTOR('',#377539,1.); +#377539 = DIRECTION('',(0.,1.,0.)); +#377540 = ORIENTED_EDGE('',*,*,#377300,.F.); +#377541 = ORIENTED_EDGE('',*,*,#377542,.F.); +#377542 = EDGE_CURVE('',#377512,#377301,#377543,.T.); +#377543 = LINE('',#377544,#377545); +#377544 = CARTESIAN_POINT('',(140.625,-76.625,0.)); +#377545 = VECTOR('',#377546,1.); +#377546 = DIRECTION('',(0.,1.,0.)); +#377547 = PLANE('',#377548); +#377548 = AXIS2_PLACEMENT_3D('',#377549,#377550,#377551); +#377549 = CARTESIAN_POINT('',(140.625,-76.625,0.)); +#377550 = DIRECTION('',(1.,-0.,0.)); +#377551 = DIRECTION('',(0.,1.,0.)); +#377552 = ADVANCED_FACE('',(#377553),#377563,.F.); +#377553 = FACE_BOUND('',#377554,.F.); +#377554 = EDGE_LOOP('',(#377555,#377556,#377557,#377558,#377559,#377560, + #377561,#377562)); +#377555 = ORIENTED_EDGE('',*,*,#377327,.T.); +#377556 = ORIENTED_EDGE('',*,*,#377359,.T.); +#377557 = ORIENTED_EDGE('',*,*,#377391,.T.); +#377558 = ORIENTED_EDGE('',*,*,#377423,.T.); +#377559 = ORIENTED_EDGE('',*,*,#377455,.T.); +#377560 = ORIENTED_EDGE('',*,*,#377487,.T.); +#377561 = ORIENTED_EDGE('',*,*,#377519,.T.); +#377562 = ORIENTED_EDGE('',*,*,#377542,.T.); +#377563 = PLANE('',#377564); +#377564 = AXIS2_PLACEMENT_3D('',#377565,#377566,#377567); +#377565 = CARTESIAN_POINT('',(0.,0.,0.)); +#377566 = DIRECTION('',(-0.,-0.,-1.)); +#377567 = DIRECTION('',(-1.,0.,0.)); +#377568 = ADVANCED_FACE('',(#377569),#377579,.T.); +#377569 = FACE_BOUND('',#377570,.T.); +#377570 = EDGE_LOOP('',(#377571,#377572,#377573,#377574,#377575,#377576, + #377577,#377578)); +#377571 = ORIENTED_EDGE('',*,*,#377310,.T.); +#377572 = ORIENTED_EDGE('',*,*,#377343,.T.); +#377573 = ORIENTED_EDGE('',*,*,#377374,.T.); +#377574 = ORIENTED_EDGE('',*,*,#377407,.T.); +#377575 = ORIENTED_EDGE('',*,*,#377438,.T.); +#377576 = ORIENTED_EDGE('',*,*,#377471,.T.); +#377577 = ORIENTED_EDGE('',*,*,#377502,.T.); +#377578 = ORIENTED_EDGE('',*,*,#377535,.T.); +#377579 = PLANE('',#377580); +#377580 = AXIS2_PLACEMENT_3D('',#377581,#377582,#377583); +#377581 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#377582 = DIRECTION('',(-0.,-0.,-1.)); +#377583 = DIRECTION('',(-1.,0.,0.)); +#377584 = MANIFOLD_SOLID_BREP('',#377585); +#377585 = CLOSED_SHELL('',(#377586,#377628,#377659,#377692,#377723, + #377756,#377787,#377820,#377842,#377858)); +#377586 = ADVANCED_FACE('',(#377587),#377623,.T.); +#377587 = FACE_BOUND('',#377588,.F.); +#377588 = EDGE_LOOP('',(#377589,#377599,#377608,#377616)); +#377589 = ORIENTED_EDGE('',*,*,#377590,.T.); +#377590 = EDGE_CURVE('',#377591,#377593,#377595,.T.); +#377591 = VERTEX_POINT('',#377592); +#377592 = CARTESIAN_POINT('',(139.19,-73.34,0.)); +#377593 = VERTEX_POINT('',#377594); +#377594 = CARTESIAN_POINT('',(139.19,-73.34,-4.E-02)); +#377595 = LINE('',#377596,#377597); +#377596 = CARTESIAN_POINT('',(139.19,-73.34,0.)); +#377597 = VECTOR('',#377598,1.); +#377598 = DIRECTION('',(0.,0.,-1.)); +#377599 = ORIENTED_EDGE('',*,*,#377600,.T.); +#377600 = EDGE_CURVE('',#377593,#377601,#377603,.T.); +#377601 = VERTEX_POINT('',#377602); +#377602 = CARTESIAN_POINT('',(139.33,-73.2,-4.E-02)); +#377603 = CIRCLE('',#377604,0.139999827125); +#377604 = AXIS2_PLACEMENT_3D('',#377605,#377606,#377607); +#377605 = CARTESIAN_POINT('',(139.32999982712,-73.33999982712,-4.E-02)); +#377606 = DIRECTION('',(0.,0.,-1.)); +#377607 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#377608 = ORIENTED_EDGE('',*,*,#377609,.F.); +#377609 = EDGE_CURVE('',#377610,#377601,#377612,.T.); +#377610 = VERTEX_POINT('',#377611); +#377611 = CARTESIAN_POINT('',(139.33,-73.2,0.)); +#377612 = LINE('',#377613,#377614); +#377613 = CARTESIAN_POINT('',(139.33,-73.2,0.)); +#377614 = VECTOR('',#377615,1.); +#377615 = DIRECTION('',(0.,0.,-1.)); +#377616 = ORIENTED_EDGE('',*,*,#377617,.F.); +#377617 = EDGE_CURVE('',#377591,#377610,#377618,.T.); +#377618 = CIRCLE('',#377619,0.139999827125); +#377619 = AXIS2_PLACEMENT_3D('',#377620,#377621,#377622); +#377620 = CARTESIAN_POINT('',(139.32999982712,-73.33999982712,0.)); +#377621 = DIRECTION('',(0.,0.,-1.)); +#377622 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#377623 = CYLINDRICAL_SURFACE('',#377624,0.139999827125); +#377624 = AXIS2_PLACEMENT_3D('',#377625,#377626,#377627); +#377625 = CARTESIAN_POINT('',(139.32999982712,-73.33999982712,0.)); +#377626 = DIRECTION('',(-0.,-0.,1.)); +#377627 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#377628 = ADVANCED_FACE('',(#377629),#377654,.F.); +#377629 = FACE_BOUND('',#377630,.F.); +#377630 = EDGE_LOOP('',(#377631,#377632,#377640,#377648)); +#377631 = ORIENTED_EDGE('',*,*,#377609,.T.); +#377632 = ORIENTED_EDGE('',*,*,#377633,.T.); +#377633 = EDGE_CURVE('',#377601,#377634,#377636,.T.); +#377634 = VERTEX_POINT('',#377635); +#377635 = CARTESIAN_POINT('',(139.67,-73.2,-4.E-02)); +#377636 = LINE('',#377637,#377638); +#377637 = CARTESIAN_POINT('',(139.33,-73.2,-4.E-02)); +#377638 = VECTOR('',#377639,1.); +#377639 = DIRECTION('',(1.,0.,0.)); +#377640 = ORIENTED_EDGE('',*,*,#377641,.F.); +#377641 = EDGE_CURVE('',#377642,#377634,#377644,.T.); +#377642 = VERTEX_POINT('',#377643); +#377643 = CARTESIAN_POINT('',(139.67,-73.2,0.)); +#377644 = LINE('',#377645,#377646); +#377645 = CARTESIAN_POINT('',(139.67,-73.2,0.)); +#377646 = VECTOR('',#377647,1.); +#377647 = DIRECTION('',(0.,0.,-1.)); +#377648 = ORIENTED_EDGE('',*,*,#377649,.F.); +#377649 = EDGE_CURVE('',#377610,#377642,#377650,.T.); +#377650 = LINE('',#377651,#377652); +#377651 = CARTESIAN_POINT('',(139.33,-73.2,0.)); +#377652 = VECTOR('',#377653,1.); +#377653 = DIRECTION('',(1.,0.,0.)); +#377654 = PLANE('',#377655); +#377655 = AXIS2_PLACEMENT_3D('',#377656,#377657,#377658); +#377656 = CARTESIAN_POINT('',(139.33,-73.2,0.)); +#377657 = DIRECTION('',(0.,-1.,0.)); +#377658 = DIRECTION('',(1.,0.,0.)); +#377659 = ADVANCED_FACE('',(#377660),#377687,.T.); +#377660 = FACE_BOUND('',#377661,.F.); +#377661 = EDGE_LOOP('',(#377662,#377663,#377672,#377680)); +#377662 = ORIENTED_EDGE('',*,*,#377641,.T.); +#377663 = ORIENTED_EDGE('',*,*,#377664,.T.); +#377664 = EDGE_CURVE('',#377634,#377665,#377667,.T.); +#377665 = VERTEX_POINT('',#377666); +#377666 = CARTESIAN_POINT('',(139.81,-73.34,-4.E-02)); +#377667 = CIRCLE('',#377668,0.139999827125); +#377668 = AXIS2_PLACEMENT_3D('',#377669,#377670,#377671); +#377669 = CARTESIAN_POINT('',(139.67000017287,-73.33999982712,-4.E-02)); +#377670 = DIRECTION('',(0.,0.,-1.)); +#377671 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#377672 = ORIENTED_EDGE('',*,*,#377673,.F.); +#377673 = EDGE_CURVE('',#377674,#377665,#377676,.T.); +#377674 = VERTEX_POINT('',#377675); +#377675 = CARTESIAN_POINT('',(139.81,-73.34,0.)); +#377676 = LINE('',#377677,#377678); +#377677 = CARTESIAN_POINT('',(139.81,-73.34,0.)); +#377678 = VECTOR('',#377679,1.); +#377679 = DIRECTION('',(0.,0.,-1.)); +#377680 = ORIENTED_EDGE('',*,*,#377681,.F.); +#377681 = EDGE_CURVE('',#377642,#377674,#377682,.T.); +#377682 = CIRCLE('',#377683,0.139999827125); +#377683 = AXIS2_PLACEMENT_3D('',#377684,#377685,#377686); +#377684 = CARTESIAN_POINT('',(139.67000017287,-73.33999982712,0.)); +#377685 = DIRECTION('',(0.,0.,-1.)); +#377686 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#377687 = CYLINDRICAL_SURFACE('',#377688,0.139999827125); +#377688 = AXIS2_PLACEMENT_3D('',#377689,#377690,#377691); +#377689 = CARTESIAN_POINT('',(139.67000017287,-73.33999982712,0.)); +#377690 = DIRECTION('',(-0.,-0.,1.)); +#377691 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#377692 = ADVANCED_FACE('',(#377693),#377718,.F.); +#377693 = FACE_BOUND('',#377694,.F.); +#377694 = EDGE_LOOP('',(#377695,#377696,#377704,#377712)); +#377695 = ORIENTED_EDGE('',*,*,#377673,.T.); +#377696 = ORIENTED_EDGE('',*,*,#377697,.T.); +#377697 = EDGE_CURVE('',#377665,#377698,#377700,.T.); +#377698 = VERTEX_POINT('',#377699); +#377699 = CARTESIAN_POINT('',(139.81,-73.62,-4.E-02)); +#377700 = LINE('',#377701,#377702); +#377701 = CARTESIAN_POINT('',(139.81,-73.34,-4.E-02)); +#377702 = VECTOR('',#377703,1.); +#377703 = DIRECTION('',(0.,-1.,0.)); +#377704 = ORIENTED_EDGE('',*,*,#377705,.F.); +#377705 = EDGE_CURVE('',#377706,#377698,#377708,.T.); +#377706 = VERTEX_POINT('',#377707); +#377707 = CARTESIAN_POINT('',(139.81,-73.62,0.)); +#377708 = LINE('',#377709,#377710); +#377709 = CARTESIAN_POINT('',(139.81,-73.62,0.)); +#377710 = VECTOR('',#377711,1.); +#377711 = DIRECTION('',(0.,0.,-1.)); +#377712 = ORIENTED_EDGE('',*,*,#377713,.F.); +#377713 = EDGE_CURVE('',#377674,#377706,#377714,.T.); +#377714 = LINE('',#377715,#377716); +#377715 = CARTESIAN_POINT('',(139.81,-73.34,0.)); +#377716 = VECTOR('',#377717,1.); +#377717 = DIRECTION('',(0.,-1.,0.)); +#377718 = PLANE('',#377719); +#377719 = AXIS2_PLACEMENT_3D('',#377720,#377721,#377722); +#377720 = CARTESIAN_POINT('',(139.81,-73.34,0.)); +#377721 = DIRECTION('',(-1.,-0.,-0.)); +#377722 = DIRECTION('',(0.,-1.,0.)); +#377723 = ADVANCED_FACE('',(#377724),#377751,.T.); +#377724 = FACE_BOUND('',#377725,.F.); +#377725 = EDGE_LOOP('',(#377726,#377727,#377736,#377744)); +#377726 = ORIENTED_EDGE('',*,*,#377705,.T.); +#377727 = ORIENTED_EDGE('',*,*,#377728,.T.); +#377728 = EDGE_CURVE('',#377698,#377729,#377731,.T.); +#377729 = VERTEX_POINT('',#377730); +#377730 = CARTESIAN_POINT('',(139.67,-73.76,-4.E-02)); +#377731 = CIRCLE('',#377732,0.139999827125); +#377732 = AXIS2_PLACEMENT_3D('',#377733,#377734,#377735); +#377733 = CARTESIAN_POINT('',(139.67000017287,-73.62000017287,-4.E-02)); +#377734 = DIRECTION('',(0.,0.,-1.)); +#377735 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#377736 = ORIENTED_EDGE('',*,*,#377737,.F.); +#377737 = EDGE_CURVE('',#377738,#377729,#377740,.T.); +#377738 = VERTEX_POINT('',#377739); +#377739 = CARTESIAN_POINT('',(139.67,-73.76,0.)); +#377740 = LINE('',#377741,#377742); +#377741 = CARTESIAN_POINT('',(139.67,-73.76,0.)); +#377742 = VECTOR('',#377743,1.); +#377743 = DIRECTION('',(0.,0.,-1.)); +#377744 = ORIENTED_EDGE('',*,*,#377745,.F.); +#377745 = EDGE_CURVE('',#377706,#377738,#377746,.T.); +#377746 = CIRCLE('',#377747,0.139999827125); +#377747 = AXIS2_PLACEMENT_3D('',#377748,#377749,#377750); +#377748 = CARTESIAN_POINT('',(139.67000017287,-73.62000017287,0.)); +#377749 = DIRECTION('',(0.,0.,-1.)); +#377750 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#377751 = CYLINDRICAL_SURFACE('',#377752,0.139999827125); +#377752 = AXIS2_PLACEMENT_3D('',#377753,#377754,#377755); +#377753 = CARTESIAN_POINT('',(139.67000017287,-73.62000017287,0.)); +#377754 = DIRECTION('',(-0.,-0.,1.)); +#377755 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#377756 = ADVANCED_FACE('',(#377757),#377782,.F.); +#377757 = FACE_BOUND('',#377758,.F.); +#377758 = EDGE_LOOP('',(#377759,#377760,#377768,#377776)); +#377759 = ORIENTED_EDGE('',*,*,#377737,.T.); +#377760 = ORIENTED_EDGE('',*,*,#377761,.T.); +#377761 = EDGE_CURVE('',#377729,#377762,#377764,.T.); +#377762 = VERTEX_POINT('',#377763); +#377763 = CARTESIAN_POINT('',(139.33,-73.76,-4.E-02)); +#377764 = LINE('',#377765,#377766); +#377765 = CARTESIAN_POINT('',(139.67,-73.76,-4.E-02)); +#377766 = VECTOR('',#377767,1.); +#377767 = DIRECTION('',(-1.,0.,0.)); +#377768 = ORIENTED_EDGE('',*,*,#377769,.F.); +#377769 = EDGE_CURVE('',#377770,#377762,#377772,.T.); +#377770 = VERTEX_POINT('',#377771); +#377771 = CARTESIAN_POINT('',(139.33,-73.76,0.)); +#377772 = LINE('',#377773,#377774); +#377773 = CARTESIAN_POINT('',(139.33,-73.76,0.)); +#377774 = VECTOR('',#377775,1.); +#377775 = DIRECTION('',(0.,0.,-1.)); +#377776 = ORIENTED_EDGE('',*,*,#377777,.F.); +#377777 = EDGE_CURVE('',#377738,#377770,#377778,.T.); +#377778 = LINE('',#377779,#377780); +#377779 = CARTESIAN_POINT('',(139.67,-73.76,0.)); +#377780 = VECTOR('',#377781,1.); +#377781 = DIRECTION('',(-1.,0.,0.)); +#377782 = PLANE('',#377783); +#377783 = AXIS2_PLACEMENT_3D('',#377784,#377785,#377786); +#377784 = CARTESIAN_POINT('',(139.67,-73.76,0.)); +#377785 = DIRECTION('',(0.,1.,0.)); +#377786 = DIRECTION('',(-1.,0.,0.)); +#377787 = ADVANCED_FACE('',(#377788),#377815,.T.); +#377788 = FACE_BOUND('',#377789,.F.); +#377789 = EDGE_LOOP('',(#377790,#377791,#377800,#377808)); +#377790 = ORIENTED_EDGE('',*,*,#377769,.T.); +#377791 = ORIENTED_EDGE('',*,*,#377792,.T.); +#377792 = EDGE_CURVE('',#377762,#377793,#377795,.T.); +#377793 = VERTEX_POINT('',#377794); +#377794 = CARTESIAN_POINT('',(139.19,-73.62,-4.E-02)); +#377795 = CIRCLE('',#377796,0.139999827125); +#377796 = AXIS2_PLACEMENT_3D('',#377797,#377798,#377799); +#377797 = CARTESIAN_POINT('',(139.32999982712,-73.62000017287,-4.E-02)); +#377798 = DIRECTION('',(0.,0.,-1.)); +#377799 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#377800 = ORIENTED_EDGE('',*,*,#377801,.F.); +#377801 = EDGE_CURVE('',#377802,#377793,#377804,.T.); +#377802 = VERTEX_POINT('',#377803); +#377803 = CARTESIAN_POINT('',(139.19,-73.62,0.)); +#377804 = LINE('',#377805,#377806); +#377805 = CARTESIAN_POINT('',(139.19,-73.62,0.)); +#377806 = VECTOR('',#377807,1.); +#377807 = DIRECTION('',(0.,0.,-1.)); +#377808 = ORIENTED_EDGE('',*,*,#377809,.F.); +#377809 = EDGE_CURVE('',#377770,#377802,#377810,.T.); +#377810 = CIRCLE('',#377811,0.139999827125); +#377811 = AXIS2_PLACEMENT_3D('',#377812,#377813,#377814); +#377812 = CARTESIAN_POINT('',(139.32999982712,-73.62000017287,0.)); +#377813 = DIRECTION('',(0.,0.,-1.)); +#377814 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#377815 = CYLINDRICAL_SURFACE('',#377816,0.139999827125); +#377816 = AXIS2_PLACEMENT_3D('',#377817,#377818,#377819); +#377817 = CARTESIAN_POINT('',(139.32999982712,-73.62000017287,0.)); +#377818 = DIRECTION('',(-0.,-0.,1.)); +#377819 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#377820 = ADVANCED_FACE('',(#377821),#377837,.F.); +#377821 = FACE_BOUND('',#377822,.F.); +#377822 = EDGE_LOOP('',(#377823,#377824,#377830,#377831)); +#377823 = ORIENTED_EDGE('',*,*,#377801,.T.); +#377824 = ORIENTED_EDGE('',*,*,#377825,.T.); +#377825 = EDGE_CURVE('',#377793,#377593,#377826,.T.); +#377826 = LINE('',#377827,#377828); +#377827 = CARTESIAN_POINT('',(139.19,-73.62,-4.E-02)); +#377828 = VECTOR('',#377829,1.); +#377829 = DIRECTION('',(0.,1.,0.)); +#377830 = ORIENTED_EDGE('',*,*,#377590,.F.); +#377831 = ORIENTED_EDGE('',*,*,#377832,.F.); +#377832 = EDGE_CURVE('',#377802,#377591,#377833,.T.); +#377833 = LINE('',#377834,#377835); +#377834 = CARTESIAN_POINT('',(139.19,-73.62,0.)); +#377835 = VECTOR('',#377836,1.); +#377836 = DIRECTION('',(0.,1.,0.)); +#377837 = PLANE('',#377838); +#377838 = AXIS2_PLACEMENT_3D('',#377839,#377840,#377841); +#377839 = CARTESIAN_POINT('',(139.19,-73.62,0.)); +#377840 = DIRECTION('',(1.,-0.,0.)); +#377841 = DIRECTION('',(0.,1.,0.)); +#377842 = ADVANCED_FACE('',(#377843),#377853,.F.); +#377843 = FACE_BOUND('',#377844,.F.); +#377844 = EDGE_LOOP('',(#377845,#377846,#377847,#377848,#377849,#377850, + #377851,#377852)); +#377845 = ORIENTED_EDGE('',*,*,#377617,.T.); +#377846 = ORIENTED_EDGE('',*,*,#377649,.T.); +#377847 = ORIENTED_EDGE('',*,*,#377681,.T.); +#377848 = ORIENTED_EDGE('',*,*,#377713,.T.); +#377849 = ORIENTED_EDGE('',*,*,#377745,.T.); +#377850 = ORIENTED_EDGE('',*,*,#377777,.T.); +#377851 = ORIENTED_EDGE('',*,*,#377809,.T.); +#377852 = ORIENTED_EDGE('',*,*,#377832,.T.); +#377853 = PLANE('',#377854); +#377854 = AXIS2_PLACEMENT_3D('',#377855,#377856,#377857); +#377855 = CARTESIAN_POINT('',(0.,0.,0.)); +#377856 = DIRECTION('',(-0.,-0.,-1.)); +#377857 = DIRECTION('',(-1.,0.,0.)); +#377858 = ADVANCED_FACE('',(#377859),#377869,.T.); +#377859 = FACE_BOUND('',#377860,.T.); +#377860 = EDGE_LOOP('',(#377861,#377862,#377863,#377864,#377865,#377866, + #377867,#377868)); +#377861 = ORIENTED_EDGE('',*,*,#377600,.T.); +#377862 = ORIENTED_EDGE('',*,*,#377633,.T.); +#377863 = ORIENTED_EDGE('',*,*,#377664,.T.); +#377864 = ORIENTED_EDGE('',*,*,#377697,.T.); +#377865 = ORIENTED_EDGE('',*,*,#377728,.T.); +#377866 = ORIENTED_EDGE('',*,*,#377761,.T.); +#377867 = ORIENTED_EDGE('',*,*,#377792,.T.); +#377868 = ORIENTED_EDGE('',*,*,#377825,.T.); +#377869 = PLANE('',#377870); +#377870 = AXIS2_PLACEMENT_3D('',#377871,#377872,#377873); +#377871 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#377872 = DIRECTION('',(-0.,-0.,-1.)); +#377873 = DIRECTION('',(-1.,0.,0.)); +#377874 = MANIFOLD_SOLID_BREP('',#377875); +#377875 = CLOSED_SHELL('',(#377876,#377918,#377949,#377982,#378013, + #378046,#378077,#378110,#378132,#378148)); +#377876 = ADVANCED_FACE('',(#377877),#377913,.T.); +#377877 = FACE_BOUND('',#377878,.F.); +#377878 = EDGE_LOOP('',(#377879,#377889,#377898,#377906)); +#377879 = ORIENTED_EDGE('',*,*,#377880,.T.); +#377880 = EDGE_CURVE('',#377881,#377883,#377885,.T.); +#377881 = VERTEX_POINT('',#377882); +#377882 = CARTESIAN_POINT('',(136.925,-77.725,0.)); +#377883 = VERTEX_POINT('',#377884); +#377884 = CARTESIAN_POINT('',(136.925,-77.725,-4.E-02)); +#377885 = LINE('',#377886,#377887); +#377886 = CARTESIAN_POINT('',(136.925,-77.725,0.)); +#377887 = VECTOR('',#377888,1.); +#377888 = DIRECTION('',(0.,0.,-1.)); +#377889 = ORIENTED_EDGE('',*,*,#377890,.T.); +#377890 = EDGE_CURVE('',#377883,#377891,#377893,.T.); +#377891 = VERTEX_POINT('',#377892); +#377892 = CARTESIAN_POINT('',(137.15,-77.5,-4.E-02)); +#377893 = CIRCLE('',#377894,0.225000087974); +#377894 = AXIS2_PLACEMENT_3D('',#377895,#377896,#377897); +#377895 = CARTESIAN_POINT('',(137.15000008797,-77.72500008797,-4.E-02)); +#377896 = DIRECTION('',(0.,0.,-1.)); +#377897 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#377898 = ORIENTED_EDGE('',*,*,#377899,.F.); +#377899 = EDGE_CURVE('',#377900,#377891,#377902,.T.); +#377900 = VERTEX_POINT('',#377901); +#377901 = CARTESIAN_POINT('',(137.15,-77.5,0.)); +#377902 = LINE('',#377903,#377904); +#377903 = CARTESIAN_POINT('',(137.15,-77.5,0.)); +#377904 = VECTOR('',#377905,1.); +#377905 = DIRECTION('',(0.,0.,-1.)); +#377906 = ORIENTED_EDGE('',*,*,#377907,.F.); +#377907 = EDGE_CURVE('',#377881,#377900,#377908,.T.); +#377908 = CIRCLE('',#377909,0.225000087974); +#377909 = AXIS2_PLACEMENT_3D('',#377910,#377911,#377912); +#377910 = CARTESIAN_POINT('',(137.15000008797,-77.72500008797,0.)); +#377911 = DIRECTION('',(0.,0.,-1.)); +#377912 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#377913 = CYLINDRICAL_SURFACE('',#377914,0.225000087974); +#377914 = AXIS2_PLACEMENT_3D('',#377915,#377916,#377917); +#377915 = CARTESIAN_POINT('',(137.15000008797,-77.72500008797,0.)); +#377916 = DIRECTION('',(-0.,-0.,1.)); +#377917 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#377918 = ADVANCED_FACE('',(#377919),#377944,.F.); +#377919 = FACE_BOUND('',#377920,.F.); +#377920 = EDGE_LOOP('',(#377921,#377922,#377930,#377938)); +#377921 = ORIENTED_EDGE('',*,*,#377899,.T.); +#377922 = ORIENTED_EDGE('',*,*,#377923,.T.); +#377923 = EDGE_CURVE('',#377891,#377924,#377926,.T.); +#377924 = VERTEX_POINT('',#377925); +#377925 = CARTESIAN_POINT('',(137.65,-77.5,-4.E-02)); +#377926 = LINE('',#377927,#377928); +#377927 = CARTESIAN_POINT('',(137.15,-77.5,-4.E-02)); +#377928 = VECTOR('',#377929,1.); +#377929 = DIRECTION('',(1.,0.,0.)); +#377930 = ORIENTED_EDGE('',*,*,#377931,.F.); +#377931 = EDGE_CURVE('',#377932,#377924,#377934,.T.); +#377932 = VERTEX_POINT('',#377933); +#377933 = CARTESIAN_POINT('',(137.65,-77.5,0.)); +#377934 = LINE('',#377935,#377936); +#377935 = CARTESIAN_POINT('',(137.65,-77.5,0.)); +#377936 = VECTOR('',#377937,1.); +#377937 = DIRECTION('',(0.,0.,-1.)); +#377938 = ORIENTED_EDGE('',*,*,#377939,.F.); +#377939 = EDGE_CURVE('',#377900,#377932,#377940,.T.); +#377940 = LINE('',#377941,#377942); +#377941 = CARTESIAN_POINT('',(137.15,-77.5,0.)); +#377942 = VECTOR('',#377943,1.); +#377943 = DIRECTION('',(1.,0.,0.)); +#377944 = PLANE('',#377945); +#377945 = AXIS2_PLACEMENT_3D('',#377946,#377947,#377948); +#377946 = CARTESIAN_POINT('',(137.15,-77.5,0.)); +#377947 = DIRECTION('',(0.,-1.,0.)); +#377948 = DIRECTION('',(1.,0.,0.)); +#377949 = ADVANCED_FACE('',(#377950),#377977,.T.); +#377950 = FACE_BOUND('',#377951,.F.); +#377951 = EDGE_LOOP('',(#377952,#377953,#377962,#377970)); +#377952 = ORIENTED_EDGE('',*,*,#377931,.T.); +#377953 = ORIENTED_EDGE('',*,*,#377954,.T.); +#377954 = EDGE_CURVE('',#377924,#377955,#377957,.T.); +#377955 = VERTEX_POINT('',#377956); +#377956 = CARTESIAN_POINT('',(137.875,-77.725,-4.E-02)); +#377957 = CIRCLE('',#377958,0.225000087974); +#377958 = AXIS2_PLACEMENT_3D('',#377959,#377960,#377961); +#377959 = CARTESIAN_POINT('',(137.64999991202,-77.72500008797,-4.E-02)); +#377960 = DIRECTION('',(0.,0.,-1.)); +#377961 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#377962 = ORIENTED_EDGE('',*,*,#377963,.F.); +#377963 = EDGE_CURVE('',#377964,#377955,#377966,.T.); +#377964 = VERTEX_POINT('',#377965); +#377965 = CARTESIAN_POINT('',(137.875,-77.725,0.)); +#377966 = LINE('',#377967,#377968); +#377967 = CARTESIAN_POINT('',(137.875,-77.725,0.)); +#377968 = VECTOR('',#377969,1.); +#377969 = DIRECTION('',(0.,0.,-1.)); +#377970 = ORIENTED_EDGE('',*,*,#377971,.F.); +#377971 = EDGE_CURVE('',#377932,#377964,#377972,.T.); +#377972 = CIRCLE('',#377973,0.225000087974); +#377973 = AXIS2_PLACEMENT_3D('',#377974,#377975,#377976); +#377974 = CARTESIAN_POINT('',(137.64999991202,-77.72500008797,0.)); +#377975 = DIRECTION('',(0.,0.,-1.)); +#377976 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#377977 = CYLINDRICAL_SURFACE('',#377978,0.225000087974); +#377978 = AXIS2_PLACEMENT_3D('',#377979,#377980,#377981); +#377979 = CARTESIAN_POINT('',(137.64999991202,-77.72500008797,0.)); +#377980 = DIRECTION('',(-0.,-0.,1.)); +#377981 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#377982 = ADVANCED_FACE('',(#377983),#378008,.F.); +#377983 = FACE_BOUND('',#377984,.F.); +#377984 = EDGE_LOOP('',(#377985,#377986,#377994,#378002)); +#377985 = ORIENTED_EDGE('',*,*,#377963,.T.); +#377986 = ORIENTED_EDGE('',*,*,#377987,.T.); +#377987 = EDGE_CURVE('',#377955,#377988,#377990,.T.); +#377988 = VERTEX_POINT('',#377989); +#377989 = CARTESIAN_POINT('',(137.875,-78.175,-4.E-02)); +#377990 = LINE('',#377991,#377992); +#377991 = CARTESIAN_POINT('',(137.875,-77.725,-4.E-02)); +#377992 = VECTOR('',#377993,1.); +#377993 = DIRECTION('',(0.,-1.,0.)); +#377994 = ORIENTED_EDGE('',*,*,#377995,.F.); +#377995 = EDGE_CURVE('',#377996,#377988,#377998,.T.); +#377996 = VERTEX_POINT('',#377997); +#377997 = CARTESIAN_POINT('',(137.875,-78.175,0.)); +#377998 = LINE('',#377999,#378000); +#377999 = CARTESIAN_POINT('',(137.875,-78.175,0.)); +#378000 = VECTOR('',#378001,1.); +#378001 = DIRECTION('',(0.,0.,-1.)); +#378002 = ORIENTED_EDGE('',*,*,#378003,.F.); +#378003 = EDGE_CURVE('',#377964,#377996,#378004,.T.); +#378004 = LINE('',#378005,#378006); +#378005 = CARTESIAN_POINT('',(137.875,-77.725,0.)); +#378006 = VECTOR('',#378007,1.); +#378007 = DIRECTION('',(0.,-1.,0.)); +#378008 = PLANE('',#378009); +#378009 = AXIS2_PLACEMENT_3D('',#378010,#378011,#378012); +#378010 = CARTESIAN_POINT('',(137.875,-77.725,0.)); +#378011 = DIRECTION('',(-1.,-0.,-0.)); +#378012 = DIRECTION('',(0.,-1.,0.)); +#378013 = ADVANCED_FACE('',(#378014),#378041,.T.); +#378014 = FACE_BOUND('',#378015,.F.); +#378015 = EDGE_LOOP('',(#378016,#378017,#378026,#378034)); +#378016 = ORIENTED_EDGE('',*,*,#377995,.T.); +#378017 = ORIENTED_EDGE('',*,*,#378018,.T.); +#378018 = EDGE_CURVE('',#377988,#378019,#378021,.T.); +#378019 = VERTEX_POINT('',#378020); +#378020 = CARTESIAN_POINT('',(137.65,-78.4,-4.E-02)); +#378021 = CIRCLE('',#378022,0.225000087974); +#378022 = AXIS2_PLACEMENT_3D('',#378023,#378024,#378025); +#378023 = CARTESIAN_POINT('',(137.64999991202,-78.17499991202,-4.E-02)); +#378024 = DIRECTION('',(0.,0.,-1.)); +#378025 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#378026 = ORIENTED_EDGE('',*,*,#378027,.F.); +#378027 = EDGE_CURVE('',#378028,#378019,#378030,.T.); +#378028 = VERTEX_POINT('',#378029); +#378029 = CARTESIAN_POINT('',(137.65,-78.4,0.)); +#378030 = LINE('',#378031,#378032); +#378031 = CARTESIAN_POINT('',(137.65,-78.4,0.)); +#378032 = VECTOR('',#378033,1.); +#378033 = DIRECTION('',(0.,0.,-1.)); +#378034 = ORIENTED_EDGE('',*,*,#378035,.F.); +#378035 = EDGE_CURVE('',#377996,#378028,#378036,.T.); +#378036 = CIRCLE('',#378037,0.225000087974); +#378037 = AXIS2_PLACEMENT_3D('',#378038,#378039,#378040); +#378038 = CARTESIAN_POINT('',(137.64999991202,-78.17499991202,0.)); +#378039 = DIRECTION('',(0.,0.,-1.)); +#378040 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#378041 = CYLINDRICAL_SURFACE('',#378042,0.225000087974); +#378042 = AXIS2_PLACEMENT_3D('',#378043,#378044,#378045); +#378043 = CARTESIAN_POINT('',(137.64999991202,-78.17499991202,0.)); +#378044 = DIRECTION('',(-0.,-0.,1.)); +#378045 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#378046 = ADVANCED_FACE('',(#378047),#378072,.F.); +#378047 = FACE_BOUND('',#378048,.F.); +#378048 = EDGE_LOOP('',(#378049,#378050,#378058,#378066)); +#378049 = ORIENTED_EDGE('',*,*,#378027,.T.); +#378050 = ORIENTED_EDGE('',*,*,#378051,.T.); +#378051 = EDGE_CURVE('',#378019,#378052,#378054,.T.); +#378052 = VERTEX_POINT('',#378053); +#378053 = CARTESIAN_POINT('',(137.15,-78.4,-4.E-02)); +#378054 = LINE('',#378055,#378056); +#378055 = CARTESIAN_POINT('',(137.65,-78.4,-4.E-02)); +#378056 = VECTOR('',#378057,1.); +#378057 = DIRECTION('',(-1.,0.,0.)); +#378058 = ORIENTED_EDGE('',*,*,#378059,.F.); +#378059 = EDGE_CURVE('',#378060,#378052,#378062,.T.); +#378060 = VERTEX_POINT('',#378061); +#378061 = CARTESIAN_POINT('',(137.15,-78.4,0.)); +#378062 = LINE('',#378063,#378064); +#378063 = CARTESIAN_POINT('',(137.15,-78.4,0.)); +#378064 = VECTOR('',#378065,1.); +#378065 = DIRECTION('',(0.,0.,-1.)); +#378066 = ORIENTED_EDGE('',*,*,#378067,.F.); +#378067 = EDGE_CURVE('',#378028,#378060,#378068,.T.); +#378068 = LINE('',#378069,#378070); +#378069 = CARTESIAN_POINT('',(137.65,-78.4,0.)); +#378070 = VECTOR('',#378071,1.); +#378071 = DIRECTION('',(-1.,0.,0.)); +#378072 = PLANE('',#378073); +#378073 = AXIS2_PLACEMENT_3D('',#378074,#378075,#378076); +#378074 = CARTESIAN_POINT('',(137.65,-78.4,0.)); +#378075 = DIRECTION('',(0.,1.,0.)); +#378076 = DIRECTION('',(-1.,0.,0.)); +#378077 = ADVANCED_FACE('',(#378078),#378105,.T.); +#378078 = FACE_BOUND('',#378079,.F.); +#378079 = EDGE_LOOP('',(#378080,#378081,#378090,#378098)); +#378080 = ORIENTED_EDGE('',*,*,#378059,.T.); +#378081 = ORIENTED_EDGE('',*,*,#378082,.T.); +#378082 = EDGE_CURVE('',#378052,#378083,#378085,.T.); +#378083 = VERTEX_POINT('',#378084); +#378084 = CARTESIAN_POINT('',(136.925,-78.175,-4.E-02)); +#378085 = CIRCLE('',#378086,0.225000087974); +#378086 = AXIS2_PLACEMENT_3D('',#378087,#378088,#378089); +#378087 = CARTESIAN_POINT('',(137.15000008797,-78.17499991202,-4.E-02)); +#378088 = DIRECTION('',(0.,0.,-1.)); +#378089 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#378090 = ORIENTED_EDGE('',*,*,#378091,.F.); +#378091 = EDGE_CURVE('',#378092,#378083,#378094,.T.); +#378092 = VERTEX_POINT('',#378093); +#378093 = CARTESIAN_POINT('',(136.925,-78.175,0.)); +#378094 = LINE('',#378095,#378096); +#378095 = CARTESIAN_POINT('',(136.925,-78.175,0.)); +#378096 = VECTOR('',#378097,1.); +#378097 = DIRECTION('',(0.,0.,-1.)); +#378098 = ORIENTED_EDGE('',*,*,#378099,.F.); +#378099 = EDGE_CURVE('',#378060,#378092,#378100,.T.); +#378100 = CIRCLE('',#378101,0.225000087974); +#378101 = AXIS2_PLACEMENT_3D('',#378102,#378103,#378104); +#378102 = CARTESIAN_POINT('',(137.15000008797,-78.17499991202,0.)); +#378103 = DIRECTION('',(0.,0.,-1.)); +#378104 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#378105 = CYLINDRICAL_SURFACE('',#378106,0.225000087974); +#378106 = AXIS2_PLACEMENT_3D('',#378107,#378108,#378109); +#378107 = CARTESIAN_POINT('',(137.15000008797,-78.17499991202,0.)); +#378108 = DIRECTION('',(-0.,-0.,1.)); +#378109 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#378110 = ADVANCED_FACE('',(#378111),#378127,.F.); +#378111 = FACE_BOUND('',#378112,.F.); +#378112 = EDGE_LOOP('',(#378113,#378114,#378120,#378121)); +#378113 = ORIENTED_EDGE('',*,*,#378091,.T.); +#378114 = ORIENTED_EDGE('',*,*,#378115,.T.); +#378115 = EDGE_CURVE('',#378083,#377883,#378116,.T.); +#378116 = LINE('',#378117,#378118); +#378117 = CARTESIAN_POINT('',(136.925,-78.175,-4.E-02)); +#378118 = VECTOR('',#378119,1.); +#378119 = DIRECTION('',(0.,1.,0.)); +#378120 = ORIENTED_EDGE('',*,*,#377880,.F.); +#378121 = ORIENTED_EDGE('',*,*,#378122,.F.); +#378122 = EDGE_CURVE('',#378092,#377881,#378123,.T.); +#378123 = LINE('',#378124,#378125); +#378124 = CARTESIAN_POINT('',(136.925,-78.175,0.)); +#378125 = VECTOR('',#378126,1.); +#378126 = DIRECTION('',(0.,1.,0.)); +#378127 = PLANE('',#378128); +#378128 = AXIS2_PLACEMENT_3D('',#378129,#378130,#378131); +#378129 = CARTESIAN_POINT('',(136.925,-78.175,0.)); +#378130 = DIRECTION('',(1.,-0.,0.)); +#378131 = DIRECTION('',(0.,1.,0.)); +#378132 = ADVANCED_FACE('',(#378133),#378143,.F.); +#378133 = FACE_BOUND('',#378134,.F.); +#378134 = EDGE_LOOP('',(#378135,#378136,#378137,#378138,#378139,#378140, + #378141,#378142)); +#378135 = ORIENTED_EDGE('',*,*,#377907,.T.); +#378136 = ORIENTED_EDGE('',*,*,#377939,.T.); +#378137 = ORIENTED_EDGE('',*,*,#377971,.T.); +#378138 = ORIENTED_EDGE('',*,*,#378003,.T.); +#378139 = ORIENTED_EDGE('',*,*,#378035,.T.); +#378140 = ORIENTED_EDGE('',*,*,#378067,.T.); +#378141 = ORIENTED_EDGE('',*,*,#378099,.T.); +#378142 = ORIENTED_EDGE('',*,*,#378122,.T.); +#378143 = PLANE('',#378144); +#378144 = AXIS2_PLACEMENT_3D('',#378145,#378146,#378147); +#378145 = CARTESIAN_POINT('',(0.,0.,0.)); +#378146 = DIRECTION('',(-0.,-0.,-1.)); +#378147 = DIRECTION('',(-1.,0.,0.)); +#378148 = ADVANCED_FACE('',(#378149),#378159,.T.); +#378149 = FACE_BOUND('',#378150,.T.); +#378150 = EDGE_LOOP('',(#378151,#378152,#378153,#378154,#378155,#378156, + #378157,#378158)); +#378151 = ORIENTED_EDGE('',*,*,#377890,.T.); +#378152 = ORIENTED_EDGE('',*,*,#377923,.T.); +#378153 = ORIENTED_EDGE('',*,*,#377954,.T.); +#378154 = ORIENTED_EDGE('',*,*,#377987,.T.); +#378155 = ORIENTED_EDGE('',*,*,#378018,.T.); +#378156 = ORIENTED_EDGE('',*,*,#378051,.T.); +#378157 = ORIENTED_EDGE('',*,*,#378082,.T.); +#378158 = ORIENTED_EDGE('',*,*,#378115,.T.); +#378159 = PLANE('',#378160); +#378160 = AXIS2_PLACEMENT_3D('',#378161,#378162,#378163); +#378161 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#378162 = DIRECTION('',(-0.,-0.,-1.)); +#378163 = DIRECTION('',(-1.,0.,0.)); +#378164 = MANIFOLD_SOLID_BREP('',#378165); +#378165 = CLOSED_SHELL('',(#378166,#378208,#378239,#378272,#378303, + #378336,#378367,#378400,#378422,#378438)); +#378166 = ADVANCED_FACE('',(#378167),#378203,.T.); +#378167 = FACE_BOUND('',#378168,.F.); +#378168 = EDGE_LOOP('',(#378169,#378179,#378188,#378196)); +#378169 = ORIENTED_EDGE('',*,*,#378170,.T.); +#378170 = EDGE_CURVE('',#378171,#378173,#378175,.T.); +#378171 = VERTEX_POINT('',#378172); +#378172 = CARTESIAN_POINT('',(137.84,-122.615,0.)); +#378173 = VERTEX_POINT('',#378174); +#378174 = CARTESIAN_POINT('',(137.84,-122.615,-4.E-02)); +#378175 = LINE('',#378176,#378177); +#378176 = CARTESIAN_POINT('',(137.84,-122.615,0.)); +#378177 = VECTOR('',#378178,1.); +#378178 = DIRECTION('',(0.,0.,-1.)); +#378179 = ORIENTED_EDGE('',*,*,#378180,.T.); +#378180 = EDGE_CURVE('',#378173,#378181,#378183,.T.); +#378181 = VERTEX_POINT('',#378182); +#378182 = CARTESIAN_POINT('',(137.975,-122.48,-4.E-02)); +#378183 = CIRCLE('',#378184,0.135001418495); +#378184 = AXIS2_PLACEMENT_3D('',#378185,#378186,#378187); +#378185 = CARTESIAN_POINT('',(137.97500141848,-122.6150014184,-4.E-02)); +#378186 = DIRECTION('',(0.,0.,-1.)); +#378187 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378188 = ORIENTED_EDGE('',*,*,#378189,.F.); +#378189 = EDGE_CURVE('',#378190,#378181,#378192,.T.); +#378190 = VERTEX_POINT('',#378191); +#378191 = CARTESIAN_POINT('',(137.975,-122.48,0.)); +#378192 = LINE('',#378193,#378194); +#378193 = CARTESIAN_POINT('',(137.975,-122.48,0.)); +#378194 = VECTOR('',#378195,1.); +#378195 = DIRECTION('',(0.,0.,-1.)); +#378196 = ORIENTED_EDGE('',*,*,#378197,.F.); +#378197 = EDGE_CURVE('',#378171,#378190,#378198,.T.); +#378198 = CIRCLE('',#378199,0.135001418495); +#378199 = AXIS2_PLACEMENT_3D('',#378200,#378201,#378202); +#378200 = CARTESIAN_POINT('',(137.97500141848,-122.6150014184,0.)); +#378201 = DIRECTION('',(0.,0.,-1.)); +#378202 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378203 = CYLINDRICAL_SURFACE('',#378204,0.135001418495); +#378204 = AXIS2_PLACEMENT_3D('',#378205,#378206,#378207); +#378205 = CARTESIAN_POINT('',(137.97500141848,-122.6150014184,0.)); +#378206 = DIRECTION('',(-0.,-0.,1.)); +#378207 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378208 = ADVANCED_FACE('',(#378209),#378234,.F.); +#378209 = FACE_BOUND('',#378210,.F.); +#378210 = EDGE_LOOP('',(#378211,#378212,#378220,#378228)); +#378211 = ORIENTED_EDGE('',*,*,#378189,.T.); +#378212 = ORIENTED_EDGE('',*,*,#378213,.T.); +#378213 = EDGE_CURVE('',#378181,#378214,#378216,.T.); +#378214 = VERTEX_POINT('',#378215); +#378215 = CARTESIAN_POINT('',(138.245,-122.48,-4.E-02)); +#378216 = LINE('',#378217,#378218); +#378217 = CARTESIAN_POINT('',(137.975,-122.48,-4.E-02)); +#378218 = VECTOR('',#378219,1.); +#378219 = DIRECTION('',(1.,0.,0.)); +#378220 = ORIENTED_EDGE('',*,*,#378221,.F.); +#378221 = EDGE_CURVE('',#378222,#378214,#378224,.T.); +#378222 = VERTEX_POINT('',#378223); +#378223 = CARTESIAN_POINT('',(138.245,-122.48,0.)); +#378224 = LINE('',#378225,#378226); +#378225 = CARTESIAN_POINT('',(138.245,-122.48,0.)); +#378226 = VECTOR('',#378227,1.); +#378227 = DIRECTION('',(0.,0.,-1.)); +#378228 = ORIENTED_EDGE('',*,*,#378229,.F.); +#378229 = EDGE_CURVE('',#378190,#378222,#378230,.T.); +#378230 = LINE('',#378231,#378232); +#378231 = CARTESIAN_POINT('',(137.975,-122.48,0.)); +#378232 = VECTOR('',#378233,1.); +#378233 = DIRECTION('',(1.,0.,0.)); +#378234 = PLANE('',#378235); +#378235 = AXIS2_PLACEMENT_3D('',#378236,#378237,#378238); +#378236 = CARTESIAN_POINT('',(137.975,-122.48,0.)); +#378237 = DIRECTION('',(0.,-1.,0.)); +#378238 = DIRECTION('',(1.,0.,0.)); +#378239 = ADVANCED_FACE('',(#378240),#378267,.T.); +#378240 = FACE_BOUND('',#378241,.F.); +#378241 = EDGE_LOOP('',(#378242,#378243,#378252,#378260)); +#378242 = ORIENTED_EDGE('',*,*,#378221,.T.); +#378243 = ORIENTED_EDGE('',*,*,#378244,.T.); +#378244 = EDGE_CURVE('',#378214,#378245,#378247,.T.); +#378245 = VERTEX_POINT('',#378246); +#378246 = CARTESIAN_POINT('',(138.38,-122.615,-4.E-02)); +#378247 = CIRCLE('',#378248,0.135001418495); +#378248 = AXIS2_PLACEMENT_3D('',#378249,#378250,#378251); +#378249 = CARTESIAN_POINT('',(138.24499858151,-122.6150014184,-4.E-02)); +#378250 = DIRECTION('',(0.,0.,-1.)); +#378251 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378252 = ORIENTED_EDGE('',*,*,#378253,.F.); +#378253 = EDGE_CURVE('',#378254,#378245,#378256,.T.); +#378254 = VERTEX_POINT('',#378255); +#378255 = CARTESIAN_POINT('',(138.38,-122.615,0.)); +#378256 = LINE('',#378257,#378258); +#378257 = CARTESIAN_POINT('',(138.38,-122.615,0.)); +#378258 = VECTOR('',#378259,1.); +#378259 = DIRECTION('',(0.,0.,-1.)); +#378260 = ORIENTED_EDGE('',*,*,#378261,.F.); +#378261 = EDGE_CURVE('',#378222,#378254,#378262,.T.); +#378262 = CIRCLE('',#378263,0.135001418495); +#378263 = AXIS2_PLACEMENT_3D('',#378264,#378265,#378266); +#378264 = CARTESIAN_POINT('',(138.24499858151,-122.6150014184,0.)); +#378265 = DIRECTION('',(0.,0.,-1.)); +#378266 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378267 = CYLINDRICAL_SURFACE('',#378268,0.135001418495); +#378268 = AXIS2_PLACEMENT_3D('',#378269,#378270,#378271); +#378269 = CARTESIAN_POINT('',(138.24499858151,-122.6150014184,0.)); +#378270 = DIRECTION('',(-0.,-0.,1.)); +#378271 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378272 = ADVANCED_FACE('',(#378273),#378298,.F.); +#378273 = FACE_BOUND('',#378274,.F.); +#378274 = EDGE_LOOP('',(#378275,#378276,#378284,#378292)); +#378275 = ORIENTED_EDGE('',*,*,#378253,.T.); +#378276 = ORIENTED_EDGE('',*,*,#378277,.T.); +#378277 = EDGE_CURVE('',#378245,#378278,#378280,.T.); +#378278 = VERTEX_POINT('',#378279); +#378279 = CARTESIAN_POINT('',(138.38,-122.985,-4.E-02)); +#378280 = LINE('',#378281,#378282); +#378281 = CARTESIAN_POINT('',(138.38,-122.615,-4.E-02)); +#378282 = VECTOR('',#378283,1.); +#378283 = DIRECTION('',(0.,-1.,0.)); +#378284 = ORIENTED_EDGE('',*,*,#378285,.F.); +#378285 = EDGE_CURVE('',#378286,#378278,#378288,.T.); +#378286 = VERTEX_POINT('',#378287); +#378287 = CARTESIAN_POINT('',(138.38,-122.985,0.)); +#378288 = LINE('',#378289,#378290); +#378289 = CARTESIAN_POINT('',(138.38,-122.985,0.)); +#378290 = VECTOR('',#378291,1.); +#378291 = DIRECTION('',(0.,0.,-1.)); +#378292 = ORIENTED_EDGE('',*,*,#378293,.F.); +#378293 = EDGE_CURVE('',#378254,#378286,#378294,.T.); +#378294 = LINE('',#378295,#378296); +#378295 = CARTESIAN_POINT('',(138.38,-122.615,0.)); +#378296 = VECTOR('',#378297,1.); +#378297 = DIRECTION('',(0.,-1.,0.)); +#378298 = PLANE('',#378299); +#378299 = AXIS2_PLACEMENT_3D('',#378300,#378301,#378302); +#378300 = CARTESIAN_POINT('',(138.38,-122.615,0.)); +#378301 = DIRECTION('',(-1.,-0.,-0.)); +#378302 = DIRECTION('',(0.,-1.,0.)); +#378303 = ADVANCED_FACE('',(#378304),#378331,.T.); +#378304 = FACE_BOUND('',#378305,.F.); +#378305 = EDGE_LOOP('',(#378306,#378307,#378316,#378324)); +#378306 = ORIENTED_EDGE('',*,*,#378285,.T.); +#378307 = ORIENTED_EDGE('',*,*,#378308,.T.); +#378308 = EDGE_CURVE('',#378278,#378309,#378311,.T.); +#378309 = VERTEX_POINT('',#378310); +#378310 = CARTESIAN_POINT('',(138.245,-123.12,-4.E-02)); +#378311 = CIRCLE('',#378312,0.135001418495); +#378312 = AXIS2_PLACEMENT_3D('',#378313,#378314,#378315); +#378313 = CARTESIAN_POINT('',(138.24499858151,-122.9849985815,-4.E-02)); +#378314 = DIRECTION('',(0.,0.,-1.)); +#378315 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#378316 = ORIENTED_EDGE('',*,*,#378317,.F.); +#378317 = EDGE_CURVE('',#378318,#378309,#378320,.T.); +#378318 = VERTEX_POINT('',#378319); +#378319 = CARTESIAN_POINT('',(138.245,-123.12,0.)); +#378320 = LINE('',#378321,#378322); +#378321 = CARTESIAN_POINT('',(138.245,-123.12,0.)); +#378322 = VECTOR('',#378323,1.); +#378323 = DIRECTION('',(0.,0.,-1.)); +#378324 = ORIENTED_EDGE('',*,*,#378325,.F.); +#378325 = EDGE_CURVE('',#378286,#378318,#378326,.T.); +#378326 = CIRCLE('',#378327,0.135001418495); +#378327 = AXIS2_PLACEMENT_3D('',#378328,#378329,#378330); +#378328 = CARTESIAN_POINT('',(138.24499858151,-122.9849985815,0.)); +#378329 = DIRECTION('',(0.,0.,-1.)); +#378330 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#378331 = CYLINDRICAL_SURFACE('',#378332,0.135001418495); +#378332 = AXIS2_PLACEMENT_3D('',#378333,#378334,#378335); +#378333 = CARTESIAN_POINT('',(138.24499858151,-122.9849985815,0.)); +#378334 = DIRECTION('',(-0.,-0.,1.)); +#378335 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#378336 = ADVANCED_FACE('',(#378337),#378362,.F.); +#378337 = FACE_BOUND('',#378338,.F.); +#378338 = EDGE_LOOP('',(#378339,#378340,#378348,#378356)); +#378339 = ORIENTED_EDGE('',*,*,#378317,.T.); +#378340 = ORIENTED_EDGE('',*,*,#378341,.T.); +#378341 = EDGE_CURVE('',#378309,#378342,#378344,.T.); +#378342 = VERTEX_POINT('',#378343); +#378343 = CARTESIAN_POINT('',(137.975,-123.12,-4.E-02)); +#378344 = LINE('',#378345,#378346); +#378345 = CARTESIAN_POINT('',(138.245,-123.12,-4.E-02)); +#378346 = VECTOR('',#378347,1.); +#378347 = DIRECTION('',(-1.,0.,0.)); +#378348 = ORIENTED_EDGE('',*,*,#378349,.F.); +#378349 = EDGE_CURVE('',#378350,#378342,#378352,.T.); +#378350 = VERTEX_POINT('',#378351); +#378351 = CARTESIAN_POINT('',(137.975,-123.12,0.)); +#378352 = LINE('',#378353,#378354); +#378353 = CARTESIAN_POINT('',(137.975,-123.12,0.)); +#378354 = VECTOR('',#378355,1.); +#378355 = DIRECTION('',(0.,0.,-1.)); +#378356 = ORIENTED_EDGE('',*,*,#378357,.F.); +#378357 = EDGE_CURVE('',#378318,#378350,#378358,.T.); +#378358 = LINE('',#378359,#378360); +#378359 = CARTESIAN_POINT('',(138.245,-123.12,0.)); +#378360 = VECTOR('',#378361,1.); +#378361 = DIRECTION('',(-1.,0.,0.)); +#378362 = PLANE('',#378363); +#378363 = AXIS2_PLACEMENT_3D('',#378364,#378365,#378366); +#378364 = CARTESIAN_POINT('',(138.245,-123.12,0.)); +#378365 = DIRECTION('',(0.,1.,0.)); +#378366 = DIRECTION('',(-1.,0.,0.)); +#378367 = ADVANCED_FACE('',(#378368),#378395,.T.); +#378368 = FACE_BOUND('',#378369,.F.); +#378369 = EDGE_LOOP('',(#378370,#378371,#378380,#378388)); +#378370 = ORIENTED_EDGE('',*,*,#378349,.T.); +#378371 = ORIENTED_EDGE('',*,*,#378372,.T.); +#378372 = EDGE_CURVE('',#378342,#378373,#378375,.T.); +#378373 = VERTEX_POINT('',#378374); +#378374 = CARTESIAN_POINT('',(137.84,-122.985,-4.E-02)); +#378375 = CIRCLE('',#378376,0.135001418495); +#378376 = AXIS2_PLACEMENT_3D('',#378377,#378378,#378379); +#378377 = CARTESIAN_POINT('',(137.97500141848,-122.9849985815,-4.E-02)); +#378378 = DIRECTION('',(0.,0.,-1.)); +#378379 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378380 = ORIENTED_EDGE('',*,*,#378381,.F.); +#378381 = EDGE_CURVE('',#378382,#378373,#378384,.T.); +#378382 = VERTEX_POINT('',#378383); +#378383 = CARTESIAN_POINT('',(137.84,-122.985,0.)); +#378384 = LINE('',#378385,#378386); +#378385 = CARTESIAN_POINT('',(137.84,-122.985,0.)); +#378386 = VECTOR('',#378387,1.); +#378387 = DIRECTION('',(0.,0.,-1.)); +#378388 = ORIENTED_EDGE('',*,*,#378389,.F.); +#378389 = EDGE_CURVE('',#378350,#378382,#378390,.T.); +#378390 = CIRCLE('',#378391,0.135001418495); +#378391 = AXIS2_PLACEMENT_3D('',#378392,#378393,#378394); +#378392 = CARTESIAN_POINT('',(137.97500141848,-122.9849985815,0.)); +#378393 = DIRECTION('',(0.,0.,-1.)); +#378394 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378395 = CYLINDRICAL_SURFACE('',#378396,0.135001418495); +#378396 = AXIS2_PLACEMENT_3D('',#378397,#378398,#378399); +#378397 = CARTESIAN_POINT('',(137.97500141848,-122.9849985815,0.)); +#378398 = DIRECTION('',(-0.,-0.,1.)); +#378399 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378400 = ADVANCED_FACE('',(#378401),#378417,.F.); +#378401 = FACE_BOUND('',#378402,.F.); +#378402 = EDGE_LOOP('',(#378403,#378404,#378410,#378411)); +#378403 = ORIENTED_EDGE('',*,*,#378381,.T.); +#378404 = ORIENTED_EDGE('',*,*,#378405,.T.); +#378405 = EDGE_CURVE('',#378373,#378173,#378406,.T.); +#378406 = LINE('',#378407,#378408); +#378407 = CARTESIAN_POINT('',(137.84,-122.985,-4.E-02)); +#378408 = VECTOR('',#378409,1.); +#378409 = DIRECTION('',(0.,1.,0.)); +#378410 = ORIENTED_EDGE('',*,*,#378170,.F.); +#378411 = ORIENTED_EDGE('',*,*,#378412,.F.); +#378412 = EDGE_CURVE('',#378382,#378171,#378413,.T.); +#378413 = LINE('',#378414,#378415); +#378414 = CARTESIAN_POINT('',(137.84,-122.985,0.)); +#378415 = VECTOR('',#378416,1.); +#378416 = DIRECTION('',(0.,1.,0.)); +#378417 = PLANE('',#378418); +#378418 = AXIS2_PLACEMENT_3D('',#378419,#378420,#378421); +#378419 = CARTESIAN_POINT('',(137.84,-122.985,0.)); +#378420 = DIRECTION('',(1.,-0.,0.)); +#378421 = DIRECTION('',(0.,1.,0.)); +#378422 = ADVANCED_FACE('',(#378423),#378433,.F.); +#378423 = FACE_BOUND('',#378424,.F.); +#378424 = EDGE_LOOP('',(#378425,#378426,#378427,#378428,#378429,#378430, + #378431,#378432)); +#378425 = ORIENTED_EDGE('',*,*,#378197,.T.); +#378426 = ORIENTED_EDGE('',*,*,#378229,.T.); +#378427 = ORIENTED_EDGE('',*,*,#378261,.T.); +#378428 = ORIENTED_EDGE('',*,*,#378293,.T.); +#378429 = ORIENTED_EDGE('',*,*,#378325,.T.); +#378430 = ORIENTED_EDGE('',*,*,#378357,.T.); +#378431 = ORIENTED_EDGE('',*,*,#378389,.T.); +#378432 = ORIENTED_EDGE('',*,*,#378412,.T.); +#378433 = PLANE('',#378434); +#378434 = AXIS2_PLACEMENT_3D('',#378435,#378436,#378437); +#378435 = CARTESIAN_POINT('',(0.,0.,0.)); +#378436 = DIRECTION('',(-0.,-0.,-1.)); +#378437 = DIRECTION('',(-1.,0.,0.)); +#378438 = ADVANCED_FACE('',(#378439),#378449,.T.); +#378439 = FACE_BOUND('',#378440,.T.); +#378440 = EDGE_LOOP('',(#378441,#378442,#378443,#378444,#378445,#378446, + #378447,#378448)); +#378441 = ORIENTED_EDGE('',*,*,#378180,.T.); +#378442 = ORIENTED_EDGE('',*,*,#378213,.T.); +#378443 = ORIENTED_EDGE('',*,*,#378244,.T.); +#378444 = ORIENTED_EDGE('',*,*,#378277,.T.); +#378445 = ORIENTED_EDGE('',*,*,#378308,.T.); +#378446 = ORIENTED_EDGE('',*,*,#378341,.T.); +#378447 = ORIENTED_EDGE('',*,*,#378372,.T.); +#378448 = ORIENTED_EDGE('',*,*,#378405,.T.); +#378449 = PLANE('',#378450); +#378450 = AXIS2_PLACEMENT_3D('',#378451,#378452,#378453); +#378451 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#378452 = DIRECTION('',(-0.,-0.,-1.)); +#378453 = DIRECTION('',(-1.,0.,0.)); +#378454 = MANIFOLD_SOLID_BREP('',#378455); +#378455 = CLOSED_SHELL('',(#378456,#378498,#378529,#378562,#378593, + #378626,#378657,#378690,#378712,#378728)); +#378456 = ADVANCED_FACE('',(#378457),#378493,.T.); +#378457 = FACE_BOUND('',#378458,.F.); +#378458 = EDGE_LOOP('',(#378459,#378469,#378478,#378486)); +#378459 = ORIENTED_EDGE('',*,*,#378460,.T.); +#378460 = EDGE_CURVE('',#378461,#378463,#378465,.T.); +#378461 = VERTEX_POINT('',#378462); +#378462 = CARTESIAN_POINT('',(141.48,-79.23,0.)); +#378463 = VERTEX_POINT('',#378464); +#378464 = CARTESIAN_POINT('',(141.48,-79.23,-4.E-02)); +#378465 = LINE('',#378466,#378467); +#378466 = CARTESIAN_POINT('',(141.48,-79.23,0.)); +#378467 = VECTOR('',#378468,1.); +#378468 = DIRECTION('',(0.,0.,-1.)); +#378469 = ORIENTED_EDGE('',*,*,#378470,.T.); +#378470 = EDGE_CURVE('',#378463,#378471,#378473,.T.); +#378471 = VERTEX_POINT('',#378472); +#378472 = CARTESIAN_POINT('',(141.62,-79.09,-4.E-02)); +#378473 = CIRCLE('',#378474,0.139999827126); +#378474 = AXIS2_PLACEMENT_3D('',#378475,#378476,#378477); +#378475 = CARTESIAN_POINT('',(141.61999982712,-79.22999982712,-4.E-02)); +#378476 = DIRECTION('',(0.,0.,-1.)); +#378477 = DIRECTION('',(-0.999999999999,-1.234820146735E-06,-0.)); +#378478 = ORIENTED_EDGE('',*,*,#378479,.F.); +#378479 = EDGE_CURVE('',#378480,#378471,#378482,.T.); +#378480 = VERTEX_POINT('',#378481); +#378481 = CARTESIAN_POINT('',(141.62,-79.09,0.)); +#378482 = LINE('',#378483,#378484); +#378483 = CARTESIAN_POINT('',(141.62,-79.09,0.)); +#378484 = VECTOR('',#378485,1.); +#378485 = DIRECTION('',(0.,0.,-1.)); +#378486 = ORIENTED_EDGE('',*,*,#378487,.F.); +#378487 = EDGE_CURVE('',#378461,#378480,#378488,.T.); +#378488 = CIRCLE('',#378489,0.139999827126); +#378489 = AXIS2_PLACEMENT_3D('',#378490,#378491,#378492); +#378490 = CARTESIAN_POINT('',(141.61999982712,-79.22999982712,0.)); +#378491 = DIRECTION('',(0.,0.,-1.)); +#378492 = DIRECTION('',(-0.999999999999,-1.234820146735E-06,-0.)); +#378493 = CYLINDRICAL_SURFACE('',#378494,0.139999827126); +#378494 = AXIS2_PLACEMENT_3D('',#378495,#378496,#378497); +#378495 = CARTESIAN_POINT('',(141.61999982712,-79.22999982712,0.)); +#378496 = DIRECTION('',(-0.,-0.,1.)); +#378497 = DIRECTION('',(-0.999999999999,-1.234820146735E-06,-0.)); +#378498 = ADVANCED_FACE('',(#378499),#378524,.F.); +#378499 = FACE_BOUND('',#378500,.F.); +#378500 = EDGE_LOOP('',(#378501,#378502,#378510,#378518)); +#378501 = ORIENTED_EDGE('',*,*,#378479,.T.); +#378502 = ORIENTED_EDGE('',*,*,#378503,.T.); +#378503 = EDGE_CURVE('',#378471,#378504,#378506,.T.); +#378504 = VERTEX_POINT('',#378505); +#378505 = CARTESIAN_POINT('',(141.9,-79.09,-4.E-02)); +#378506 = LINE('',#378507,#378508); +#378507 = CARTESIAN_POINT('',(141.62,-79.09,-4.E-02)); +#378508 = VECTOR('',#378509,1.); +#378509 = DIRECTION('',(1.,0.,0.)); +#378510 = ORIENTED_EDGE('',*,*,#378511,.F.); +#378511 = EDGE_CURVE('',#378512,#378504,#378514,.T.); +#378512 = VERTEX_POINT('',#378513); +#378513 = CARTESIAN_POINT('',(141.9,-79.09,0.)); +#378514 = LINE('',#378515,#378516); +#378515 = CARTESIAN_POINT('',(141.9,-79.09,0.)); +#378516 = VECTOR('',#378517,1.); +#378517 = DIRECTION('',(0.,0.,-1.)); +#378518 = ORIENTED_EDGE('',*,*,#378519,.F.); +#378519 = EDGE_CURVE('',#378480,#378512,#378520,.T.); +#378520 = LINE('',#378521,#378522); +#378521 = CARTESIAN_POINT('',(141.62,-79.09,0.)); +#378522 = VECTOR('',#378523,1.); +#378523 = DIRECTION('',(1.,0.,0.)); +#378524 = PLANE('',#378525); +#378525 = AXIS2_PLACEMENT_3D('',#378526,#378527,#378528); +#378526 = CARTESIAN_POINT('',(141.62,-79.09,0.)); +#378527 = DIRECTION('',(0.,-1.,0.)); +#378528 = DIRECTION('',(1.,0.,0.)); +#378529 = ADVANCED_FACE('',(#378530),#378557,.T.); +#378530 = FACE_BOUND('',#378531,.F.); +#378531 = EDGE_LOOP('',(#378532,#378533,#378542,#378550)); +#378532 = ORIENTED_EDGE('',*,*,#378511,.T.); +#378533 = ORIENTED_EDGE('',*,*,#378534,.T.); +#378534 = EDGE_CURVE('',#378504,#378535,#378537,.T.); +#378535 = VERTEX_POINT('',#378536); +#378536 = CARTESIAN_POINT('',(142.04,-79.23,-4.E-02)); +#378537 = CIRCLE('',#378538,0.139999827125); +#378538 = AXIS2_PLACEMENT_3D('',#378539,#378540,#378541); +#378539 = CARTESIAN_POINT('',(141.90000017287,-79.22999982712,-4.E-02)); +#378540 = DIRECTION('',(0.,0.,-1.)); +#378541 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#378542 = ORIENTED_EDGE('',*,*,#378543,.F.); +#378543 = EDGE_CURVE('',#378544,#378535,#378546,.T.); +#378544 = VERTEX_POINT('',#378545); +#378545 = CARTESIAN_POINT('',(142.04,-79.23,0.)); +#378546 = LINE('',#378547,#378548); +#378547 = CARTESIAN_POINT('',(142.04,-79.23,0.)); +#378548 = VECTOR('',#378549,1.); +#378549 = DIRECTION('',(0.,0.,-1.)); +#378550 = ORIENTED_EDGE('',*,*,#378551,.F.); +#378551 = EDGE_CURVE('',#378512,#378544,#378552,.T.); +#378552 = CIRCLE('',#378553,0.139999827125); +#378553 = AXIS2_PLACEMENT_3D('',#378554,#378555,#378556); +#378554 = CARTESIAN_POINT('',(141.90000017287,-79.22999982712,0.)); +#378555 = DIRECTION('',(0.,0.,-1.)); +#378556 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#378557 = CYLINDRICAL_SURFACE('',#378558,0.139999827125); +#378558 = AXIS2_PLACEMENT_3D('',#378559,#378560,#378561); +#378559 = CARTESIAN_POINT('',(141.90000017287,-79.22999982712,0.)); +#378560 = DIRECTION('',(-0.,-0.,1.)); +#378561 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#378562 = ADVANCED_FACE('',(#378563),#378588,.F.); +#378563 = FACE_BOUND('',#378564,.F.); +#378564 = EDGE_LOOP('',(#378565,#378566,#378574,#378582)); +#378565 = ORIENTED_EDGE('',*,*,#378543,.T.); +#378566 = ORIENTED_EDGE('',*,*,#378567,.T.); +#378567 = EDGE_CURVE('',#378535,#378568,#378570,.T.); +#378568 = VERTEX_POINT('',#378569); +#378569 = CARTESIAN_POINT('',(142.04,-79.57,-4.E-02)); +#378570 = LINE('',#378571,#378572); +#378571 = CARTESIAN_POINT('',(142.04,-79.23,-4.E-02)); +#378572 = VECTOR('',#378573,1.); +#378573 = DIRECTION('',(0.,-1.,0.)); +#378574 = ORIENTED_EDGE('',*,*,#378575,.F.); +#378575 = EDGE_CURVE('',#378576,#378568,#378578,.T.); +#378576 = VERTEX_POINT('',#378577); +#378577 = CARTESIAN_POINT('',(142.04,-79.57,0.)); +#378578 = LINE('',#378579,#378580); +#378579 = CARTESIAN_POINT('',(142.04,-79.57,0.)); +#378580 = VECTOR('',#378581,1.); +#378581 = DIRECTION('',(0.,0.,-1.)); +#378582 = ORIENTED_EDGE('',*,*,#378583,.F.); +#378583 = EDGE_CURVE('',#378544,#378576,#378584,.T.); +#378584 = LINE('',#378585,#378586); +#378585 = CARTESIAN_POINT('',(142.04,-79.23,0.)); +#378586 = VECTOR('',#378587,1.); +#378587 = DIRECTION('',(0.,-1.,0.)); +#378588 = PLANE('',#378589); +#378589 = AXIS2_PLACEMENT_3D('',#378590,#378591,#378592); +#378590 = CARTESIAN_POINT('',(142.04,-79.23,0.)); +#378591 = DIRECTION('',(-1.,-0.,-0.)); +#378592 = DIRECTION('',(0.,-1.,0.)); +#378593 = ADVANCED_FACE('',(#378594),#378621,.T.); +#378594 = FACE_BOUND('',#378595,.F.); +#378595 = EDGE_LOOP('',(#378596,#378597,#378606,#378614)); +#378596 = ORIENTED_EDGE('',*,*,#378575,.T.); +#378597 = ORIENTED_EDGE('',*,*,#378598,.T.); +#378598 = EDGE_CURVE('',#378568,#378599,#378601,.T.); +#378599 = VERTEX_POINT('',#378600); +#378600 = CARTESIAN_POINT('',(141.9,-79.71,-4.E-02)); +#378601 = CIRCLE('',#378602,0.139999827125); +#378602 = AXIS2_PLACEMENT_3D('',#378603,#378604,#378605); +#378603 = CARTESIAN_POINT('',(141.90000017287,-79.57000017287,-4.E-02)); +#378604 = DIRECTION('',(0.,0.,-1.)); +#378605 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#378606 = ORIENTED_EDGE('',*,*,#378607,.F.); +#378607 = EDGE_CURVE('',#378608,#378599,#378610,.T.); +#378608 = VERTEX_POINT('',#378609); +#378609 = CARTESIAN_POINT('',(141.9,-79.71,0.)); +#378610 = LINE('',#378611,#378612); +#378611 = CARTESIAN_POINT('',(141.9,-79.71,0.)); +#378612 = VECTOR('',#378613,1.); +#378613 = DIRECTION('',(0.,0.,-1.)); +#378614 = ORIENTED_EDGE('',*,*,#378615,.F.); +#378615 = EDGE_CURVE('',#378576,#378608,#378616,.T.); +#378616 = CIRCLE('',#378617,0.139999827125); +#378617 = AXIS2_PLACEMENT_3D('',#378618,#378619,#378620); +#378618 = CARTESIAN_POINT('',(141.90000017287,-79.57000017287,0.)); +#378619 = DIRECTION('',(0.,0.,-1.)); +#378620 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#378621 = CYLINDRICAL_SURFACE('',#378622,0.139999827125); +#378622 = AXIS2_PLACEMENT_3D('',#378623,#378624,#378625); +#378623 = CARTESIAN_POINT('',(141.90000017287,-79.57000017287,0.)); +#378624 = DIRECTION('',(-0.,-0.,1.)); +#378625 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#378626 = ADVANCED_FACE('',(#378627),#378652,.F.); +#378627 = FACE_BOUND('',#378628,.F.); +#378628 = EDGE_LOOP('',(#378629,#378630,#378638,#378646)); +#378629 = ORIENTED_EDGE('',*,*,#378607,.T.); +#378630 = ORIENTED_EDGE('',*,*,#378631,.T.); +#378631 = EDGE_CURVE('',#378599,#378632,#378634,.T.); +#378632 = VERTEX_POINT('',#378633); +#378633 = CARTESIAN_POINT('',(141.62,-79.71,-4.E-02)); +#378634 = LINE('',#378635,#378636); +#378635 = CARTESIAN_POINT('',(141.9,-79.71,-4.E-02)); +#378636 = VECTOR('',#378637,1.); +#378637 = DIRECTION('',(-1.,0.,0.)); +#378638 = ORIENTED_EDGE('',*,*,#378639,.F.); +#378639 = EDGE_CURVE('',#378640,#378632,#378642,.T.); +#378640 = VERTEX_POINT('',#378641); +#378641 = CARTESIAN_POINT('',(141.62,-79.71,0.)); +#378642 = LINE('',#378643,#378644); +#378643 = CARTESIAN_POINT('',(141.62,-79.71,0.)); +#378644 = VECTOR('',#378645,1.); +#378645 = DIRECTION('',(0.,0.,-1.)); +#378646 = ORIENTED_EDGE('',*,*,#378647,.F.); +#378647 = EDGE_CURVE('',#378608,#378640,#378648,.T.); +#378648 = LINE('',#378649,#378650); +#378649 = CARTESIAN_POINT('',(141.9,-79.71,0.)); +#378650 = VECTOR('',#378651,1.); +#378651 = DIRECTION('',(-1.,0.,0.)); +#378652 = PLANE('',#378653); +#378653 = AXIS2_PLACEMENT_3D('',#378654,#378655,#378656); +#378654 = CARTESIAN_POINT('',(141.9,-79.71,0.)); +#378655 = DIRECTION('',(0.,1.,0.)); +#378656 = DIRECTION('',(-1.,0.,0.)); +#378657 = ADVANCED_FACE('',(#378658),#378685,.T.); +#378658 = FACE_BOUND('',#378659,.F.); +#378659 = EDGE_LOOP('',(#378660,#378661,#378670,#378678)); +#378660 = ORIENTED_EDGE('',*,*,#378639,.T.); +#378661 = ORIENTED_EDGE('',*,*,#378662,.T.); +#378662 = EDGE_CURVE('',#378632,#378663,#378665,.T.); +#378663 = VERTEX_POINT('',#378664); +#378664 = CARTESIAN_POINT('',(141.48,-79.57,-4.E-02)); +#378665 = CIRCLE('',#378666,0.139999827126); +#378666 = AXIS2_PLACEMENT_3D('',#378667,#378668,#378669); +#378667 = CARTESIAN_POINT('',(141.61999982712,-79.57000017287,-4.E-02)); +#378668 = DIRECTION('',(0.,0.,-1.)); +#378669 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#378670 = ORIENTED_EDGE('',*,*,#378671,.F.); +#378671 = EDGE_CURVE('',#378672,#378663,#378674,.T.); +#378672 = VERTEX_POINT('',#378673); +#378673 = CARTESIAN_POINT('',(141.48,-79.57,0.)); +#378674 = LINE('',#378675,#378676); +#378675 = CARTESIAN_POINT('',(141.48,-79.57,0.)); +#378676 = VECTOR('',#378677,1.); +#378677 = DIRECTION('',(0.,0.,-1.)); +#378678 = ORIENTED_EDGE('',*,*,#378679,.F.); +#378679 = EDGE_CURVE('',#378640,#378672,#378680,.T.); +#378680 = CIRCLE('',#378681,0.139999827126); +#378681 = AXIS2_PLACEMENT_3D('',#378682,#378683,#378684); +#378682 = CARTESIAN_POINT('',(141.61999982712,-79.57000017287,0.)); +#378683 = DIRECTION('',(0.,0.,-1.)); +#378684 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#378685 = CYLINDRICAL_SURFACE('',#378686,0.139999827126); +#378686 = AXIS2_PLACEMENT_3D('',#378687,#378688,#378689); +#378687 = CARTESIAN_POINT('',(141.61999982712,-79.57000017287,0.)); +#378688 = DIRECTION('',(-0.,-0.,1.)); +#378689 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#378690 = ADVANCED_FACE('',(#378691),#378707,.F.); +#378691 = FACE_BOUND('',#378692,.F.); +#378692 = EDGE_LOOP('',(#378693,#378694,#378700,#378701)); +#378693 = ORIENTED_EDGE('',*,*,#378671,.T.); +#378694 = ORIENTED_EDGE('',*,*,#378695,.T.); +#378695 = EDGE_CURVE('',#378663,#378463,#378696,.T.); +#378696 = LINE('',#378697,#378698); +#378697 = CARTESIAN_POINT('',(141.48,-79.57,-4.E-02)); +#378698 = VECTOR('',#378699,1.); +#378699 = DIRECTION('',(0.,1.,0.)); +#378700 = ORIENTED_EDGE('',*,*,#378460,.F.); +#378701 = ORIENTED_EDGE('',*,*,#378702,.F.); +#378702 = EDGE_CURVE('',#378672,#378461,#378703,.T.); +#378703 = LINE('',#378704,#378705); +#378704 = CARTESIAN_POINT('',(141.48,-79.57,0.)); +#378705 = VECTOR('',#378706,1.); +#378706 = DIRECTION('',(0.,1.,0.)); +#378707 = PLANE('',#378708); +#378708 = AXIS2_PLACEMENT_3D('',#378709,#378710,#378711); +#378709 = CARTESIAN_POINT('',(141.48,-79.57,0.)); +#378710 = DIRECTION('',(1.,-0.,0.)); +#378711 = DIRECTION('',(0.,1.,0.)); +#378712 = ADVANCED_FACE('',(#378713),#378723,.F.); +#378713 = FACE_BOUND('',#378714,.F.); +#378714 = EDGE_LOOP('',(#378715,#378716,#378717,#378718,#378719,#378720, + #378721,#378722)); +#378715 = ORIENTED_EDGE('',*,*,#378487,.T.); +#378716 = ORIENTED_EDGE('',*,*,#378519,.T.); +#378717 = ORIENTED_EDGE('',*,*,#378551,.T.); +#378718 = ORIENTED_EDGE('',*,*,#378583,.T.); +#378719 = ORIENTED_EDGE('',*,*,#378615,.T.); +#378720 = ORIENTED_EDGE('',*,*,#378647,.T.); +#378721 = ORIENTED_EDGE('',*,*,#378679,.T.); +#378722 = ORIENTED_EDGE('',*,*,#378702,.T.); +#378723 = PLANE('',#378724); +#378724 = AXIS2_PLACEMENT_3D('',#378725,#378726,#378727); +#378725 = CARTESIAN_POINT('',(0.,0.,0.)); +#378726 = DIRECTION('',(-0.,-0.,-1.)); +#378727 = DIRECTION('',(-1.,0.,0.)); +#378728 = ADVANCED_FACE('',(#378729),#378739,.T.); +#378729 = FACE_BOUND('',#378730,.T.); +#378730 = EDGE_LOOP('',(#378731,#378732,#378733,#378734,#378735,#378736, + #378737,#378738)); +#378731 = ORIENTED_EDGE('',*,*,#378470,.T.); +#378732 = ORIENTED_EDGE('',*,*,#378503,.T.); +#378733 = ORIENTED_EDGE('',*,*,#378534,.T.); +#378734 = ORIENTED_EDGE('',*,*,#378567,.T.); +#378735 = ORIENTED_EDGE('',*,*,#378598,.T.); +#378736 = ORIENTED_EDGE('',*,*,#378631,.T.); +#378737 = ORIENTED_EDGE('',*,*,#378662,.T.); +#378738 = ORIENTED_EDGE('',*,*,#378695,.T.); +#378739 = PLANE('',#378740); +#378740 = AXIS2_PLACEMENT_3D('',#378741,#378742,#378743); +#378741 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#378742 = DIRECTION('',(-0.,-0.,-1.)); +#378743 = DIRECTION('',(-1.,0.,0.)); +#378744 = MANIFOLD_SOLID_BREP('',#378745); +#378745 = CLOSED_SHELL('',(#378746,#378788,#378819,#378852,#378883, + #378916,#378947,#378980,#379002,#379018)); +#378746 = ADVANCED_FACE('',(#378747),#378783,.T.); +#378747 = FACE_BOUND('',#378748,.F.); +#378748 = EDGE_LOOP('',(#378749,#378759,#378768,#378776)); +#378749 = ORIENTED_EDGE('',*,*,#378750,.T.); +#378750 = EDGE_CURVE('',#378751,#378753,#378755,.T.); +#378751 = VERTEX_POINT('',#378752); +#378752 = CARTESIAN_POINT('',(127.63,-119.815,0.)); +#378753 = VERTEX_POINT('',#378754); +#378754 = CARTESIAN_POINT('',(127.63,-119.815,-4.E-02)); +#378755 = LINE('',#378756,#378757); +#378756 = CARTESIAN_POINT('',(127.63,-119.815,0.)); +#378757 = VECTOR('',#378758,1.); +#378758 = DIRECTION('',(0.,0.,-1.)); +#378759 = ORIENTED_EDGE('',*,*,#378760,.T.); +#378760 = EDGE_CURVE('',#378753,#378761,#378763,.T.); +#378761 = VERTEX_POINT('',#378762); +#378762 = CARTESIAN_POINT('',(127.765,-119.68,-4.E-02)); +#378763 = CIRCLE('',#378764,0.135001418495); +#378764 = AXIS2_PLACEMENT_3D('',#378765,#378766,#378767); +#378765 = CARTESIAN_POINT('',(127.76500141848,-119.8150014184,-4.E-02)); +#378766 = DIRECTION('',(0.,0.,-1.)); +#378767 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378768 = ORIENTED_EDGE('',*,*,#378769,.F.); +#378769 = EDGE_CURVE('',#378770,#378761,#378772,.T.); +#378770 = VERTEX_POINT('',#378771); +#378771 = CARTESIAN_POINT('',(127.765,-119.68,0.)); +#378772 = LINE('',#378773,#378774); +#378773 = CARTESIAN_POINT('',(127.765,-119.68,0.)); +#378774 = VECTOR('',#378775,1.); +#378775 = DIRECTION('',(0.,0.,-1.)); +#378776 = ORIENTED_EDGE('',*,*,#378777,.F.); +#378777 = EDGE_CURVE('',#378751,#378770,#378778,.T.); +#378778 = CIRCLE('',#378779,0.135001418495); +#378779 = AXIS2_PLACEMENT_3D('',#378780,#378781,#378782); +#378780 = CARTESIAN_POINT('',(127.76500141848,-119.8150014184,0.)); +#378781 = DIRECTION('',(0.,0.,-1.)); +#378782 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378783 = CYLINDRICAL_SURFACE('',#378784,0.135001418495); +#378784 = AXIS2_PLACEMENT_3D('',#378785,#378786,#378787); +#378785 = CARTESIAN_POINT('',(127.76500141848,-119.8150014184,0.)); +#378786 = DIRECTION('',(-0.,-0.,1.)); +#378787 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#378788 = ADVANCED_FACE('',(#378789),#378814,.F.); +#378789 = FACE_BOUND('',#378790,.F.); +#378790 = EDGE_LOOP('',(#378791,#378792,#378800,#378808)); +#378791 = ORIENTED_EDGE('',*,*,#378769,.T.); +#378792 = ORIENTED_EDGE('',*,*,#378793,.T.); +#378793 = EDGE_CURVE('',#378761,#378794,#378796,.T.); +#378794 = VERTEX_POINT('',#378795); +#378795 = CARTESIAN_POINT('',(128.035,-119.68,-4.E-02)); +#378796 = LINE('',#378797,#378798); +#378797 = CARTESIAN_POINT('',(127.765,-119.68,-4.E-02)); +#378798 = VECTOR('',#378799,1.); +#378799 = DIRECTION('',(1.,0.,0.)); +#378800 = ORIENTED_EDGE('',*,*,#378801,.F.); +#378801 = EDGE_CURVE('',#378802,#378794,#378804,.T.); +#378802 = VERTEX_POINT('',#378803); +#378803 = CARTESIAN_POINT('',(128.035,-119.68,0.)); +#378804 = LINE('',#378805,#378806); +#378805 = CARTESIAN_POINT('',(128.035,-119.68,0.)); +#378806 = VECTOR('',#378807,1.); +#378807 = DIRECTION('',(0.,0.,-1.)); +#378808 = ORIENTED_EDGE('',*,*,#378809,.F.); +#378809 = EDGE_CURVE('',#378770,#378802,#378810,.T.); +#378810 = LINE('',#378811,#378812); +#378811 = CARTESIAN_POINT('',(127.765,-119.68,0.)); +#378812 = VECTOR('',#378813,1.); +#378813 = DIRECTION('',(1.,0.,0.)); +#378814 = PLANE('',#378815); +#378815 = AXIS2_PLACEMENT_3D('',#378816,#378817,#378818); +#378816 = CARTESIAN_POINT('',(127.765,-119.68,0.)); +#378817 = DIRECTION('',(0.,-1.,0.)); +#378818 = DIRECTION('',(1.,0.,0.)); +#378819 = ADVANCED_FACE('',(#378820),#378847,.T.); +#378820 = FACE_BOUND('',#378821,.F.); +#378821 = EDGE_LOOP('',(#378822,#378823,#378832,#378840)); +#378822 = ORIENTED_EDGE('',*,*,#378801,.T.); +#378823 = ORIENTED_EDGE('',*,*,#378824,.T.); +#378824 = EDGE_CURVE('',#378794,#378825,#378827,.T.); +#378825 = VERTEX_POINT('',#378826); +#378826 = CARTESIAN_POINT('',(128.17,-119.815,-4.E-02)); +#378827 = CIRCLE('',#378828,0.135001418495); +#378828 = AXIS2_PLACEMENT_3D('',#378829,#378830,#378831); +#378829 = CARTESIAN_POINT('',(128.03499858151,-119.8150014184,-4.E-02)); +#378830 = DIRECTION('',(0.,0.,-1.)); +#378831 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378832 = ORIENTED_EDGE('',*,*,#378833,.F.); +#378833 = EDGE_CURVE('',#378834,#378825,#378836,.T.); +#378834 = VERTEX_POINT('',#378835); +#378835 = CARTESIAN_POINT('',(128.17,-119.815,0.)); +#378836 = LINE('',#378837,#378838); +#378837 = CARTESIAN_POINT('',(128.17,-119.815,0.)); +#378838 = VECTOR('',#378839,1.); +#378839 = DIRECTION('',(0.,0.,-1.)); +#378840 = ORIENTED_EDGE('',*,*,#378841,.F.); +#378841 = EDGE_CURVE('',#378802,#378834,#378842,.T.); +#378842 = CIRCLE('',#378843,0.135001418495); +#378843 = AXIS2_PLACEMENT_3D('',#378844,#378845,#378846); +#378844 = CARTESIAN_POINT('',(128.03499858151,-119.8150014184,0.)); +#378845 = DIRECTION('',(0.,0.,-1.)); +#378846 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378847 = CYLINDRICAL_SURFACE('',#378848,0.135001418495); +#378848 = AXIS2_PLACEMENT_3D('',#378849,#378850,#378851); +#378849 = CARTESIAN_POINT('',(128.03499858151,-119.8150014184,0.)); +#378850 = DIRECTION('',(-0.,-0.,1.)); +#378851 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#378852 = ADVANCED_FACE('',(#378853),#378878,.F.); +#378853 = FACE_BOUND('',#378854,.F.); +#378854 = EDGE_LOOP('',(#378855,#378856,#378864,#378872)); +#378855 = ORIENTED_EDGE('',*,*,#378833,.T.); +#378856 = ORIENTED_EDGE('',*,*,#378857,.T.); +#378857 = EDGE_CURVE('',#378825,#378858,#378860,.T.); +#378858 = VERTEX_POINT('',#378859); +#378859 = CARTESIAN_POINT('',(128.17,-120.185,-4.E-02)); +#378860 = LINE('',#378861,#378862); +#378861 = CARTESIAN_POINT('',(128.17,-119.815,-4.E-02)); +#378862 = VECTOR('',#378863,1.); +#378863 = DIRECTION('',(0.,-1.,0.)); +#378864 = ORIENTED_EDGE('',*,*,#378865,.F.); +#378865 = EDGE_CURVE('',#378866,#378858,#378868,.T.); +#378866 = VERTEX_POINT('',#378867); +#378867 = CARTESIAN_POINT('',(128.17,-120.185,0.)); +#378868 = LINE('',#378869,#378870); +#378869 = CARTESIAN_POINT('',(128.17,-120.185,0.)); +#378870 = VECTOR('',#378871,1.); +#378871 = DIRECTION('',(0.,0.,-1.)); +#378872 = ORIENTED_EDGE('',*,*,#378873,.F.); +#378873 = EDGE_CURVE('',#378834,#378866,#378874,.T.); +#378874 = LINE('',#378875,#378876); +#378875 = CARTESIAN_POINT('',(128.17,-119.815,0.)); +#378876 = VECTOR('',#378877,1.); +#378877 = DIRECTION('',(0.,-1.,0.)); +#378878 = PLANE('',#378879); +#378879 = AXIS2_PLACEMENT_3D('',#378880,#378881,#378882); +#378880 = CARTESIAN_POINT('',(128.17,-119.815,0.)); +#378881 = DIRECTION('',(-1.,-0.,-0.)); +#378882 = DIRECTION('',(0.,-1.,0.)); +#378883 = ADVANCED_FACE('',(#378884),#378911,.T.); +#378884 = FACE_BOUND('',#378885,.F.); +#378885 = EDGE_LOOP('',(#378886,#378887,#378896,#378904)); +#378886 = ORIENTED_EDGE('',*,*,#378865,.T.); +#378887 = ORIENTED_EDGE('',*,*,#378888,.T.); +#378888 = EDGE_CURVE('',#378858,#378889,#378891,.T.); +#378889 = VERTEX_POINT('',#378890); +#378890 = CARTESIAN_POINT('',(128.035,-120.32,-4.E-02)); +#378891 = CIRCLE('',#378892,0.135001418495); +#378892 = AXIS2_PLACEMENT_3D('',#378893,#378894,#378895); +#378893 = CARTESIAN_POINT('',(128.03499858151,-120.1849985815,-4.E-02)); +#378894 = DIRECTION('',(0.,0.,-1.)); +#378895 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#378896 = ORIENTED_EDGE('',*,*,#378897,.F.); +#378897 = EDGE_CURVE('',#378898,#378889,#378900,.T.); +#378898 = VERTEX_POINT('',#378899); +#378899 = CARTESIAN_POINT('',(128.035,-120.32,0.)); +#378900 = LINE('',#378901,#378902); +#378901 = CARTESIAN_POINT('',(128.035,-120.32,0.)); +#378902 = VECTOR('',#378903,1.); +#378903 = DIRECTION('',(0.,0.,-1.)); +#378904 = ORIENTED_EDGE('',*,*,#378905,.F.); +#378905 = EDGE_CURVE('',#378866,#378898,#378906,.T.); +#378906 = CIRCLE('',#378907,0.135001418495); +#378907 = AXIS2_PLACEMENT_3D('',#378908,#378909,#378910); +#378908 = CARTESIAN_POINT('',(128.03499858151,-120.1849985815,0.)); +#378909 = DIRECTION('',(0.,0.,-1.)); +#378910 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#378911 = CYLINDRICAL_SURFACE('',#378912,0.135001418495); +#378912 = AXIS2_PLACEMENT_3D('',#378913,#378914,#378915); +#378913 = CARTESIAN_POINT('',(128.03499858151,-120.1849985815,0.)); +#378914 = DIRECTION('',(-0.,-0.,1.)); +#378915 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#378916 = ADVANCED_FACE('',(#378917),#378942,.F.); +#378917 = FACE_BOUND('',#378918,.F.); +#378918 = EDGE_LOOP('',(#378919,#378920,#378928,#378936)); +#378919 = ORIENTED_EDGE('',*,*,#378897,.T.); +#378920 = ORIENTED_EDGE('',*,*,#378921,.T.); +#378921 = EDGE_CURVE('',#378889,#378922,#378924,.T.); +#378922 = VERTEX_POINT('',#378923); +#378923 = CARTESIAN_POINT('',(127.765,-120.32,-4.E-02)); +#378924 = LINE('',#378925,#378926); +#378925 = CARTESIAN_POINT('',(128.035,-120.32,-4.E-02)); +#378926 = VECTOR('',#378927,1.); +#378927 = DIRECTION('',(-1.,0.,0.)); +#378928 = ORIENTED_EDGE('',*,*,#378929,.F.); +#378929 = EDGE_CURVE('',#378930,#378922,#378932,.T.); +#378930 = VERTEX_POINT('',#378931); +#378931 = CARTESIAN_POINT('',(127.765,-120.32,0.)); +#378932 = LINE('',#378933,#378934); +#378933 = CARTESIAN_POINT('',(127.765,-120.32,0.)); +#378934 = VECTOR('',#378935,1.); +#378935 = DIRECTION('',(0.,0.,-1.)); +#378936 = ORIENTED_EDGE('',*,*,#378937,.F.); +#378937 = EDGE_CURVE('',#378898,#378930,#378938,.T.); +#378938 = LINE('',#378939,#378940); +#378939 = CARTESIAN_POINT('',(128.035,-120.32,0.)); +#378940 = VECTOR('',#378941,1.); +#378941 = DIRECTION('',(-1.,0.,0.)); +#378942 = PLANE('',#378943); +#378943 = AXIS2_PLACEMENT_3D('',#378944,#378945,#378946); +#378944 = CARTESIAN_POINT('',(128.035,-120.32,0.)); +#378945 = DIRECTION('',(0.,1.,0.)); +#378946 = DIRECTION('',(-1.,0.,0.)); +#378947 = ADVANCED_FACE('',(#378948),#378975,.T.); +#378948 = FACE_BOUND('',#378949,.F.); +#378949 = EDGE_LOOP('',(#378950,#378951,#378960,#378968)); +#378950 = ORIENTED_EDGE('',*,*,#378929,.T.); +#378951 = ORIENTED_EDGE('',*,*,#378952,.T.); +#378952 = EDGE_CURVE('',#378922,#378953,#378955,.T.); +#378953 = VERTEX_POINT('',#378954); +#378954 = CARTESIAN_POINT('',(127.63,-120.185,-4.E-02)); +#378955 = CIRCLE('',#378956,0.135001418495); +#378956 = AXIS2_PLACEMENT_3D('',#378957,#378958,#378959); +#378957 = CARTESIAN_POINT('',(127.76500141848,-120.1849985815,-4.E-02)); +#378958 = DIRECTION('',(0.,0.,-1.)); +#378959 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378960 = ORIENTED_EDGE('',*,*,#378961,.F.); +#378961 = EDGE_CURVE('',#378962,#378953,#378964,.T.); +#378962 = VERTEX_POINT('',#378963); +#378963 = CARTESIAN_POINT('',(127.63,-120.185,0.)); +#378964 = LINE('',#378965,#378966); +#378965 = CARTESIAN_POINT('',(127.63,-120.185,0.)); +#378966 = VECTOR('',#378967,1.); +#378967 = DIRECTION('',(0.,0.,-1.)); +#378968 = ORIENTED_EDGE('',*,*,#378969,.F.); +#378969 = EDGE_CURVE('',#378930,#378962,#378970,.T.); +#378970 = CIRCLE('',#378971,0.135001418495); +#378971 = AXIS2_PLACEMENT_3D('',#378972,#378973,#378974); +#378972 = CARTESIAN_POINT('',(127.76500141848,-120.1849985815,0.)); +#378973 = DIRECTION('',(0.,0.,-1.)); +#378974 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378975 = CYLINDRICAL_SURFACE('',#378976,0.135001418495); +#378976 = AXIS2_PLACEMENT_3D('',#378977,#378978,#378979); +#378977 = CARTESIAN_POINT('',(127.76500141848,-120.1849985815,0.)); +#378978 = DIRECTION('',(-0.,-0.,1.)); +#378979 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#378980 = ADVANCED_FACE('',(#378981),#378997,.F.); +#378981 = FACE_BOUND('',#378982,.F.); +#378982 = EDGE_LOOP('',(#378983,#378984,#378990,#378991)); +#378983 = ORIENTED_EDGE('',*,*,#378961,.T.); +#378984 = ORIENTED_EDGE('',*,*,#378985,.T.); +#378985 = EDGE_CURVE('',#378953,#378753,#378986,.T.); +#378986 = LINE('',#378987,#378988); +#378987 = CARTESIAN_POINT('',(127.63,-120.185,-4.E-02)); +#378988 = VECTOR('',#378989,1.); +#378989 = DIRECTION('',(0.,1.,0.)); +#378990 = ORIENTED_EDGE('',*,*,#378750,.F.); +#378991 = ORIENTED_EDGE('',*,*,#378992,.F.); +#378992 = EDGE_CURVE('',#378962,#378751,#378993,.T.); +#378993 = LINE('',#378994,#378995); +#378994 = CARTESIAN_POINT('',(127.63,-120.185,0.)); +#378995 = VECTOR('',#378996,1.); +#378996 = DIRECTION('',(0.,1.,0.)); +#378997 = PLANE('',#378998); +#378998 = AXIS2_PLACEMENT_3D('',#378999,#379000,#379001); +#378999 = CARTESIAN_POINT('',(127.63,-120.185,0.)); +#379000 = DIRECTION('',(1.,-0.,0.)); +#379001 = DIRECTION('',(0.,1.,0.)); +#379002 = ADVANCED_FACE('',(#379003),#379013,.F.); +#379003 = FACE_BOUND('',#379004,.F.); +#379004 = EDGE_LOOP('',(#379005,#379006,#379007,#379008,#379009,#379010, + #379011,#379012)); +#379005 = ORIENTED_EDGE('',*,*,#378777,.T.); +#379006 = ORIENTED_EDGE('',*,*,#378809,.T.); +#379007 = ORIENTED_EDGE('',*,*,#378841,.T.); +#379008 = ORIENTED_EDGE('',*,*,#378873,.T.); +#379009 = ORIENTED_EDGE('',*,*,#378905,.T.); +#379010 = ORIENTED_EDGE('',*,*,#378937,.T.); +#379011 = ORIENTED_EDGE('',*,*,#378969,.T.); +#379012 = ORIENTED_EDGE('',*,*,#378992,.T.); +#379013 = PLANE('',#379014); +#379014 = AXIS2_PLACEMENT_3D('',#379015,#379016,#379017); +#379015 = CARTESIAN_POINT('',(0.,0.,0.)); +#379016 = DIRECTION('',(-0.,-0.,-1.)); +#379017 = DIRECTION('',(-1.,0.,0.)); +#379018 = ADVANCED_FACE('',(#379019),#379029,.T.); +#379019 = FACE_BOUND('',#379020,.T.); +#379020 = EDGE_LOOP('',(#379021,#379022,#379023,#379024,#379025,#379026, + #379027,#379028)); +#379021 = ORIENTED_EDGE('',*,*,#378760,.T.); +#379022 = ORIENTED_EDGE('',*,*,#378793,.T.); +#379023 = ORIENTED_EDGE('',*,*,#378824,.T.); +#379024 = ORIENTED_EDGE('',*,*,#378857,.T.); +#379025 = ORIENTED_EDGE('',*,*,#378888,.T.); +#379026 = ORIENTED_EDGE('',*,*,#378921,.T.); +#379027 = ORIENTED_EDGE('',*,*,#378952,.T.); +#379028 = ORIENTED_EDGE('',*,*,#378985,.T.); +#379029 = PLANE('',#379030); +#379030 = AXIS2_PLACEMENT_3D('',#379031,#379032,#379033); +#379031 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#379032 = DIRECTION('',(-0.,-0.,-1.)); +#379033 = DIRECTION('',(-1.,0.,0.)); +#379034 = MANIFOLD_SOLID_BREP('',#379035); +#379035 = CLOSED_SHELL('',(#379036,#379078,#379109,#379142,#379173, + #379206,#379237,#379270,#379292,#379308)); +#379036 = ADVANCED_FACE('',(#379037),#379073,.T.); +#379037 = FACE_BOUND('',#379038,.F.); +#379038 = EDGE_LOOP('',(#379039,#379049,#379058,#379066)); +#379039 = ORIENTED_EDGE('',*,*,#379040,.T.); +#379040 = EDGE_CURVE('',#379041,#379043,#379045,.T.); +#379041 = VERTEX_POINT('',#379042); +#379042 = CARTESIAN_POINT('',(122.205,-112.605,0.)); +#379043 = VERTEX_POINT('',#379044); +#379044 = CARTESIAN_POINT('',(122.205,-112.605,-4.E-02)); +#379045 = LINE('',#379046,#379047); +#379046 = CARTESIAN_POINT('',(122.205,-112.605,0.)); +#379047 = VECTOR('',#379048,1.); +#379048 = DIRECTION('',(0.,0.,-1.)); +#379049 = ORIENTED_EDGE('',*,*,#379050,.T.); +#379050 = EDGE_CURVE('',#379043,#379051,#379053,.T.); +#379051 = VERTEX_POINT('',#379052); +#379052 = CARTESIAN_POINT('',(122.34,-112.47,-4.E-02)); +#379053 = CIRCLE('',#379054,0.135001418495); +#379054 = AXIS2_PLACEMENT_3D('',#379055,#379056,#379057); +#379055 = CARTESIAN_POINT('',(122.34000141848,-112.6050014184,-4.E-02)); +#379056 = DIRECTION('',(0.,0.,-1.)); +#379057 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#379058 = ORIENTED_EDGE('',*,*,#379059,.F.); +#379059 = EDGE_CURVE('',#379060,#379051,#379062,.T.); +#379060 = VERTEX_POINT('',#379061); +#379061 = CARTESIAN_POINT('',(122.34,-112.47,0.)); +#379062 = LINE('',#379063,#379064); +#379063 = CARTESIAN_POINT('',(122.34,-112.47,0.)); +#379064 = VECTOR('',#379065,1.); +#379065 = DIRECTION('',(0.,0.,-1.)); +#379066 = ORIENTED_EDGE('',*,*,#379067,.F.); +#379067 = EDGE_CURVE('',#379041,#379060,#379068,.T.); +#379068 = CIRCLE('',#379069,0.135001418495); +#379069 = AXIS2_PLACEMENT_3D('',#379070,#379071,#379072); +#379070 = CARTESIAN_POINT('',(122.34000141848,-112.6050014184,0.)); +#379071 = DIRECTION('',(0.,0.,-1.)); +#379072 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#379073 = CYLINDRICAL_SURFACE('',#379074,0.135001418495); +#379074 = AXIS2_PLACEMENT_3D('',#379075,#379076,#379077); +#379075 = CARTESIAN_POINT('',(122.34000141848,-112.6050014184,0.)); +#379076 = DIRECTION('',(-0.,-0.,1.)); +#379077 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#379078 = ADVANCED_FACE('',(#379079),#379104,.F.); +#379079 = FACE_BOUND('',#379080,.F.); +#379080 = EDGE_LOOP('',(#379081,#379082,#379090,#379098)); +#379081 = ORIENTED_EDGE('',*,*,#379059,.T.); +#379082 = ORIENTED_EDGE('',*,*,#379083,.T.); +#379083 = EDGE_CURVE('',#379051,#379084,#379086,.T.); +#379084 = VERTEX_POINT('',#379085); +#379085 = CARTESIAN_POINT('',(122.71,-112.47,-4.E-02)); +#379086 = LINE('',#379087,#379088); +#379087 = CARTESIAN_POINT('',(122.34,-112.47,-4.E-02)); +#379088 = VECTOR('',#379089,1.); +#379089 = DIRECTION('',(1.,0.,0.)); +#379090 = ORIENTED_EDGE('',*,*,#379091,.F.); +#379091 = EDGE_CURVE('',#379092,#379084,#379094,.T.); +#379092 = VERTEX_POINT('',#379093); +#379093 = CARTESIAN_POINT('',(122.71,-112.47,0.)); +#379094 = LINE('',#379095,#379096); +#379095 = CARTESIAN_POINT('',(122.71,-112.47,0.)); +#379096 = VECTOR('',#379097,1.); +#379097 = DIRECTION('',(0.,0.,-1.)); +#379098 = ORIENTED_EDGE('',*,*,#379099,.F.); +#379099 = EDGE_CURVE('',#379060,#379092,#379100,.T.); +#379100 = LINE('',#379101,#379102); +#379101 = CARTESIAN_POINT('',(122.34,-112.47,0.)); +#379102 = VECTOR('',#379103,1.); +#379103 = DIRECTION('',(1.,0.,0.)); +#379104 = PLANE('',#379105); +#379105 = AXIS2_PLACEMENT_3D('',#379106,#379107,#379108); +#379106 = CARTESIAN_POINT('',(122.34,-112.47,0.)); +#379107 = DIRECTION('',(0.,-1.,0.)); +#379108 = DIRECTION('',(1.,0.,0.)); +#379109 = ADVANCED_FACE('',(#379110),#379137,.T.); +#379110 = FACE_BOUND('',#379111,.F.); +#379111 = EDGE_LOOP('',(#379112,#379113,#379122,#379130)); +#379112 = ORIENTED_EDGE('',*,*,#379091,.T.); +#379113 = ORIENTED_EDGE('',*,*,#379114,.T.); +#379114 = EDGE_CURVE('',#379084,#379115,#379117,.T.); +#379115 = VERTEX_POINT('',#379116); +#379116 = CARTESIAN_POINT('',(122.845,-112.605,-4.E-02)); +#379117 = CIRCLE('',#379118,0.135001418495); +#379118 = AXIS2_PLACEMENT_3D('',#379119,#379120,#379121); +#379119 = CARTESIAN_POINT('',(122.70999858151,-112.6050014184,-4.E-02)); +#379120 = DIRECTION('',(0.,0.,-1.)); +#379121 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#379122 = ORIENTED_EDGE('',*,*,#379123,.F.); +#379123 = EDGE_CURVE('',#379124,#379115,#379126,.T.); +#379124 = VERTEX_POINT('',#379125); +#379125 = CARTESIAN_POINT('',(122.845,-112.605,0.)); +#379126 = LINE('',#379127,#379128); +#379127 = CARTESIAN_POINT('',(122.845,-112.605,0.)); +#379128 = VECTOR('',#379129,1.); +#379129 = DIRECTION('',(0.,0.,-1.)); +#379130 = ORIENTED_EDGE('',*,*,#379131,.F.); +#379131 = EDGE_CURVE('',#379092,#379124,#379132,.T.); +#379132 = CIRCLE('',#379133,0.135001418495); +#379133 = AXIS2_PLACEMENT_3D('',#379134,#379135,#379136); +#379134 = CARTESIAN_POINT('',(122.70999858151,-112.6050014184,0.)); +#379135 = DIRECTION('',(0.,0.,-1.)); +#379136 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#379137 = CYLINDRICAL_SURFACE('',#379138,0.135001418495); +#379138 = AXIS2_PLACEMENT_3D('',#379139,#379140,#379141); +#379139 = CARTESIAN_POINT('',(122.70999858151,-112.6050014184,0.)); +#379140 = DIRECTION('',(-0.,-0.,1.)); +#379141 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#379142 = ADVANCED_FACE('',(#379143),#379168,.F.); +#379143 = FACE_BOUND('',#379144,.F.); +#379144 = EDGE_LOOP('',(#379145,#379146,#379154,#379162)); +#379145 = ORIENTED_EDGE('',*,*,#379123,.T.); +#379146 = ORIENTED_EDGE('',*,*,#379147,.T.); +#379147 = EDGE_CURVE('',#379115,#379148,#379150,.T.); +#379148 = VERTEX_POINT('',#379149); +#379149 = CARTESIAN_POINT('',(122.845,-112.875,-4.E-02)); +#379150 = LINE('',#379151,#379152); +#379151 = CARTESIAN_POINT('',(122.845,-112.605,-4.E-02)); +#379152 = VECTOR('',#379153,1.); +#379153 = DIRECTION('',(0.,-1.,0.)); +#379154 = ORIENTED_EDGE('',*,*,#379155,.F.); +#379155 = EDGE_CURVE('',#379156,#379148,#379158,.T.); +#379156 = VERTEX_POINT('',#379157); +#379157 = CARTESIAN_POINT('',(122.845,-112.875,0.)); +#379158 = LINE('',#379159,#379160); +#379159 = CARTESIAN_POINT('',(122.845,-112.875,0.)); +#379160 = VECTOR('',#379161,1.); +#379161 = DIRECTION('',(0.,0.,-1.)); +#379162 = ORIENTED_EDGE('',*,*,#379163,.F.); +#379163 = EDGE_CURVE('',#379124,#379156,#379164,.T.); +#379164 = LINE('',#379165,#379166); +#379165 = CARTESIAN_POINT('',(122.845,-112.605,0.)); +#379166 = VECTOR('',#379167,1.); +#379167 = DIRECTION('',(0.,-1.,0.)); +#379168 = PLANE('',#379169); +#379169 = AXIS2_PLACEMENT_3D('',#379170,#379171,#379172); +#379170 = CARTESIAN_POINT('',(122.845,-112.605,0.)); +#379171 = DIRECTION('',(-1.,-0.,-0.)); +#379172 = DIRECTION('',(0.,-1.,0.)); +#379173 = ADVANCED_FACE('',(#379174),#379201,.T.); +#379174 = FACE_BOUND('',#379175,.F.); +#379175 = EDGE_LOOP('',(#379176,#379177,#379186,#379194)); +#379176 = ORIENTED_EDGE('',*,*,#379155,.T.); +#379177 = ORIENTED_EDGE('',*,*,#379178,.T.); +#379178 = EDGE_CURVE('',#379148,#379179,#379181,.T.); +#379179 = VERTEX_POINT('',#379180); +#379180 = CARTESIAN_POINT('',(122.71,-113.01,-4.E-02)); +#379181 = CIRCLE('',#379182,0.135001418495); +#379182 = AXIS2_PLACEMENT_3D('',#379183,#379184,#379185); +#379183 = CARTESIAN_POINT('',(122.70999858151,-112.8749985815,-4.E-02)); +#379184 = DIRECTION('',(0.,0.,-1.)); +#379185 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#379186 = ORIENTED_EDGE('',*,*,#379187,.F.); +#379187 = EDGE_CURVE('',#379188,#379179,#379190,.T.); +#379188 = VERTEX_POINT('',#379189); +#379189 = CARTESIAN_POINT('',(122.71,-113.01,0.)); +#379190 = LINE('',#379191,#379192); +#379191 = CARTESIAN_POINT('',(122.71,-113.01,0.)); +#379192 = VECTOR('',#379193,1.); +#379193 = DIRECTION('',(0.,0.,-1.)); +#379194 = ORIENTED_EDGE('',*,*,#379195,.F.); +#379195 = EDGE_CURVE('',#379156,#379188,#379196,.T.); +#379196 = CIRCLE('',#379197,0.135001418495); +#379197 = AXIS2_PLACEMENT_3D('',#379198,#379199,#379200); +#379198 = CARTESIAN_POINT('',(122.70999858151,-112.8749985815,0.)); +#379199 = DIRECTION('',(0.,0.,-1.)); +#379200 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#379201 = CYLINDRICAL_SURFACE('',#379202,0.135001418495); +#379202 = AXIS2_PLACEMENT_3D('',#379203,#379204,#379205); +#379203 = CARTESIAN_POINT('',(122.70999858151,-112.8749985815,0.)); +#379204 = DIRECTION('',(-0.,-0.,1.)); +#379205 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#379206 = ADVANCED_FACE('',(#379207),#379232,.F.); +#379207 = FACE_BOUND('',#379208,.F.); +#379208 = EDGE_LOOP('',(#379209,#379210,#379218,#379226)); +#379209 = ORIENTED_EDGE('',*,*,#379187,.T.); +#379210 = ORIENTED_EDGE('',*,*,#379211,.T.); +#379211 = EDGE_CURVE('',#379179,#379212,#379214,.T.); +#379212 = VERTEX_POINT('',#379213); +#379213 = CARTESIAN_POINT('',(122.34,-113.01,-4.E-02)); +#379214 = LINE('',#379215,#379216); +#379215 = CARTESIAN_POINT('',(122.71,-113.01,-4.E-02)); +#379216 = VECTOR('',#379217,1.); +#379217 = DIRECTION('',(-1.,0.,0.)); +#379218 = ORIENTED_EDGE('',*,*,#379219,.F.); +#379219 = EDGE_CURVE('',#379220,#379212,#379222,.T.); +#379220 = VERTEX_POINT('',#379221); +#379221 = CARTESIAN_POINT('',(122.34,-113.01,0.)); +#379222 = LINE('',#379223,#379224); +#379223 = CARTESIAN_POINT('',(122.34,-113.01,0.)); +#379224 = VECTOR('',#379225,1.); +#379225 = DIRECTION('',(0.,0.,-1.)); +#379226 = ORIENTED_EDGE('',*,*,#379227,.F.); +#379227 = EDGE_CURVE('',#379188,#379220,#379228,.T.); +#379228 = LINE('',#379229,#379230); +#379229 = CARTESIAN_POINT('',(122.71,-113.01,0.)); +#379230 = VECTOR('',#379231,1.); +#379231 = DIRECTION('',(-1.,0.,0.)); +#379232 = PLANE('',#379233); +#379233 = AXIS2_PLACEMENT_3D('',#379234,#379235,#379236); +#379234 = CARTESIAN_POINT('',(122.71,-113.01,0.)); +#379235 = DIRECTION('',(0.,1.,0.)); +#379236 = DIRECTION('',(-1.,0.,0.)); +#379237 = ADVANCED_FACE('',(#379238),#379265,.T.); +#379238 = FACE_BOUND('',#379239,.F.); +#379239 = EDGE_LOOP('',(#379240,#379241,#379250,#379258)); +#379240 = ORIENTED_EDGE('',*,*,#379219,.T.); +#379241 = ORIENTED_EDGE('',*,*,#379242,.T.); +#379242 = EDGE_CURVE('',#379212,#379243,#379245,.T.); +#379243 = VERTEX_POINT('',#379244); +#379244 = CARTESIAN_POINT('',(122.205,-112.875,-4.E-02)); +#379245 = CIRCLE('',#379246,0.135001418495); +#379246 = AXIS2_PLACEMENT_3D('',#379247,#379248,#379249); +#379247 = CARTESIAN_POINT('',(122.34000141848,-112.8749985815,-4.E-02)); +#379248 = DIRECTION('',(0.,0.,-1.)); +#379249 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#379250 = ORIENTED_EDGE('',*,*,#379251,.F.); +#379251 = EDGE_CURVE('',#379252,#379243,#379254,.T.); +#379252 = VERTEX_POINT('',#379253); +#379253 = CARTESIAN_POINT('',(122.205,-112.875,0.)); +#379254 = LINE('',#379255,#379256); +#379255 = CARTESIAN_POINT('',(122.205,-112.875,0.)); +#379256 = VECTOR('',#379257,1.); +#379257 = DIRECTION('',(0.,0.,-1.)); +#379258 = ORIENTED_EDGE('',*,*,#379259,.F.); +#379259 = EDGE_CURVE('',#379220,#379252,#379260,.T.); +#379260 = CIRCLE('',#379261,0.135001418495); +#379261 = AXIS2_PLACEMENT_3D('',#379262,#379263,#379264); +#379262 = CARTESIAN_POINT('',(122.34000141848,-112.8749985815,0.)); +#379263 = DIRECTION('',(0.,0.,-1.)); +#379264 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#379265 = CYLINDRICAL_SURFACE('',#379266,0.135001418495); +#379266 = AXIS2_PLACEMENT_3D('',#379267,#379268,#379269); +#379267 = CARTESIAN_POINT('',(122.34000141848,-112.8749985815,0.)); +#379268 = DIRECTION('',(-0.,-0.,1.)); +#379269 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#379270 = ADVANCED_FACE('',(#379271),#379287,.F.); +#379271 = FACE_BOUND('',#379272,.F.); +#379272 = EDGE_LOOP('',(#379273,#379274,#379280,#379281)); +#379273 = ORIENTED_EDGE('',*,*,#379251,.T.); +#379274 = ORIENTED_EDGE('',*,*,#379275,.T.); +#379275 = EDGE_CURVE('',#379243,#379043,#379276,.T.); +#379276 = LINE('',#379277,#379278); +#379277 = CARTESIAN_POINT('',(122.205,-112.875,-4.E-02)); +#379278 = VECTOR('',#379279,1.); +#379279 = DIRECTION('',(0.,1.,0.)); +#379280 = ORIENTED_EDGE('',*,*,#379040,.F.); +#379281 = ORIENTED_EDGE('',*,*,#379282,.F.); +#379282 = EDGE_CURVE('',#379252,#379041,#379283,.T.); +#379283 = LINE('',#379284,#379285); +#379284 = CARTESIAN_POINT('',(122.205,-112.875,0.)); +#379285 = VECTOR('',#379286,1.); +#379286 = DIRECTION('',(0.,1.,0.)); +#379287 = PLANE('',#379288); +#379288 = AXIS2_PLACEMENT_3D('',#379289,#379290,#379291); +#379289 = CARTESIAN_POINT('',(122.205,-112.875,0.)); +#379290 = DIRECTION('',(1.,-0.,0.)); +#379291 = DIRECTION('',(0.,1.,0.)); +#379292 = ADVANCED_FACE('',(#379293),#379303,.F.); +#379293 = FACE_BOUND('',#379294,.F.); +#379294 = EDGE_LOOP('',(#379295,#379296,#379297,#379298,#379299,#379300, + #379301,#379302)); +#379295 = ORIENTED_EDGE('',*,*,#379067,.T.); +#379296 = ORIENTED_EDGE('',*,*,#379099,.T.); +#379297 = ORIENTED_EDGE('',*,*,#379131,.T.); +#379298 = ORIENTED_EDGE('',*,*,#379163,.T.); +#379299 = ORIENTED_EDGE('',*,*,#379195,.T.); +#379300 = ORIENTED_EDGE('',*,*,#379227,.T.); +#379301 = ORIENTED_EDGE('',*,*,#379259,.T.); +#379302 = ORIENTED_EDGE('',*,*,#379282,.T.); +#379303 = PLANE('',#379304); +#379304 = AXIS2_PLACEMENT_3D('',#379305,#379306,#379307); +#379305 = CARTESIAN_POINT('',(0.,0.,0.)); +#379306 = DIRECTION('',(-0.,-0.,-1.)); +#379307 = DIRECTION('',(-1.,0.,0.)); +#379308 = ADVANCED_FACE('',(#379309),#379319,.T.); +#379309 = FACE_BOUND('',#379310,.T.); +#379310 = EDGE_LOOP('',(#379311,#379312,#379313,#379314,#379315,#379316, + #379317,#379318)); +#379311 = ORIENTED_EDGE('',*,*,#379050,.T.); +#379312 = ORIENTED_EDGE('',*,*,#379083,.T.); +#379313 = ORIENTED_EDGE('',*,*,#379114,.T.); +#379314 = ORIENTED_EDGE('',*,*,#379147,.T.); +#379315 = ORIENTED_EDGE('',*,*,#379178,.T.); +#379316 = ORIENTED_EDGE('',*,*,#379211,.T.); +#379317 = ORIENTED_EDGE('',*,*,#379242,.T.); +#379318 = ORIENTED_EDGE('',*,*,#379275,.T.); +#379319 = PLANE('',#379320); +#379320 = AXIS2_PLACEMENT_3D('',#379321,#379322,#379323); +#379321 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#379322 = DIRECTION('',(-0.,-0.,-1.)); +#379323 = DIRECTION('',(-1.,0.,0.)); +#379324 = MANIFOLD_SOLID_BREP('',#379325); +#379325 = CLOSED_SHELL('',(#379326,#379368,#379399,#379432,#379463, + #379496,#379527,#379560,#379582,#379598)); +#379326 = ADVANCED_FACE('',(#379327),#379363,.T.); +#379327 = FACE_BOUND('',#379328,.F.); +#379328 = EDGE_LOOP('',(#379329,#379339,#379348,#379356)); +#379329 = ORIENTED_EDGE('',*,*,#379330,.T.); +#379330 = EDGE_CURVE('',#379331,#379333,#379335,.T.); +#379331 = VERTEX_POINT('',#379332); +#379332 = CARTESIAN_POINT('',(138.49,-77.515,0.)); +#379333 = VERTEX_POINT('',#379334); +#379334 = CARTESIAN_POINT('',(138.49,-77.515,-4.E-02)); +#379335 = LINE('',#379336,#379337); +#379336 = CARTESIAN_POINT('',(138.49,-77.515,0.)); +#379337 = VECTOR('',#379338,1.); +#379338 = DIRECTION('',(0.,0.,-1.)); +#379339 = ORIENTED_EDGE('',*,*,#379340,.T.); +#379340 = EDGE_CURVE('',#379333,#379341,#379343,.T.); +#379341 = VERTEX_POINT('',#379342); +#379342 = CARTESIAN_POINT('',(138.63,-77.375,-4.E-02)); +#379343 = CIRCLE('',#379344,0.139999827125); +#379344 = AXIS2_PLACEMENT_3D('',#379345,#379346,#379347); +#379345 = CARTESIAN_POINT('',(138.62999982712,-77.51499982712,-4.E-02)); +#379346 = DIRECTION('',(0.,0.,-1.)); +#379347 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#379348 = ORIENTED_EDGE('',*,*,#379349,.F.); +#379349 = EDGE_CURVE('',#379350,#379341,#379352,.T.); +#379350 = VERTEX_POINT('',#379351); +#379351 = CARTESIAN_POINT('',(138.63,-77.375,0.)); +#379352 = LINE('',#379353,#379354); +#379353 = CARTESIAN_POINT('',(138.63,-77.375,0.)); +#379354 = VECTOR('',#379355,1.); +#379355 = DIRECTION('',(0.,0.,-1.)); +#379356 = ORIENTED_EDGE('',*,*,#379357,.F.); +#379357 = EDGE_CURVE('',#379331,#379350,#379358,.T.); +#379358 = CIRCLE('',#379359,0.139999827125); +#379359 = AXIS2_PLACEMENT_3D('',#379360,#379361,#379362); +#379360 = CARTESIAN_POINT('',(138.62999982712,-77.51499982712,0.)); +#379361 = DIRECTION('',(0.,0.,-1.)); +#379362 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#379363 = CYLINDRICAL_SURFACE('',#379364,0.139999827125); +#379364 = AXIS2_PLACEMENT_3D('',#379365,#379366,#379367); +#379365 = CARTESIAN_POINT('',(138.62999982712,-77.51499982712,0.)); +#379366 = DIRECTION('',(-0.,-0.,1.)); +#379367 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#379368 = ADVANCED_FACE('',(#379369),#379394,.F.); +#379369 = FACE_BOUND('',#379370,.F.); +#379370 = EDGE_LOOP('',(#379371,#379372,#379380,#379388)); +#379371 = ORIENTED_EDGE('',*,*,#379349,.T.); +#379372 = ORIENTED_EDGE('',*,*,#379373,.T.); +#379373 = EDGE_CURVE('',#379341,#379374,#379376,.T.); +#379374 = VERTEX_POINT('',#379375); +#379375 = CARTESIAN_POINT('',(138.97,-77.375,-4.E-02)); +#379376 = LINE('',#379377,#379378); +#379377 = CARTESIAN_POINT('',(138.63,-77.375,-4.E-02)); +#379378 = VECTOR('',#379379,1.); +#379379 = DIRECTION('',(1.,0.,0.)); +#379380 = ORIENTED_EDGE('',*,*,#379381,.F.); +#379381 = EDGE_CURVE('',#379382,#379374,#379384,.T.); +#379382 = VERTEX_POINT('',#379383); +#379383 = CARTESIAN_POINT('',(138.97,-77.375,0.)); +#379384 = LINE('',#379385,#379386); +#379385 = CARTESIAN_POINT('',(138.97,-77.375,0.)); +#379386 = VECTOR('',#379387,1.); +#379387 = DIRECTION('',(0.,0.,-1.)); +#379388 = ORIENTED_EDGE('',*,*,#379389,.F.); +#379389 = EDGE_CURVE('',#379350,#379382,#379390,.T.); +#379390 = LINE('',#379391,#379392); +#379391 = CARTESIAN_POINT('',(138.63,-77.375,0.)); +#379392 = VECTOR('',#379393,1.); +#379393 = DIRECTION('',(1.,0.,0.)); +#379394 = PLANE('',#379395); +#379395 = AXIS2_PLACEMENT_3D('',#379396,#379397,#379398); +#379396 = CARTESIAN_POINT('',(138.63,-77.375,0.)); +#379397 = DIRECTION('',(0.,-1.,0.)); +#379398 = DIRECTION('',(1.,0.,0.)); +#379399 = ADVANCED_FACE('',(#379400),#379427,.T.); +#379400 = FACE_BOUND('',#379401,.F.); +#379401 = EDGE_LOOP('',(#379402,#379403,#379412,#379420)); +#379402 = ORIENTED_EDGE('',*,*,#379381,.T.); +#379403 = ORIENTED_EDGE('',*,*,#379404,.T.); +#379404 = EDGE_CURVE('',#379374,#379405,#379407,.T.); +#379405 = VERTEX_POINT('',#379406); +#379406 = CARTESIAN_POINT('',(139.11,-77.515,-4.E-02)); +#379407 = CIRCLE('',#379408,0.139999827125); +#379408 = AXIS2_PLACEMENT_3D('',#379409,#379410,#379411); +#379409 = CARTESIAN_POINT('',(138.97000017287,-77.51499982712,-4.E-02)); +#379410 = DIRECTION('',(0.,0.,-1.)); +#379411 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#379412 = ORIENTED_EDGE('',*,*,#379413,.F.); +#379413 = EDGE_CURVE('',#379414,#379405,#379416,.T.); +#379414 = VERTEX_POINT('',#379415); +#379415 = CARTESIAN_POINT('',(139.11,-77.515,0.)); +#379416 = LINE('',#379417,#379418); +#379417 = CARTESIAN_POINT('',(139.11,-77.515,0.)); +#379418 = VECTOR('',#379419,1.); +#379419 = DIRECTION('',(0.,0.,-1.)); +#379420 = ORIENTED_EDGE('',*,*,#379421,.F.); +#379421 = EDGE_CURVE('',#379382,#379414,#379422,.T.); +#379422 = CIRCLE('',#379423,0.139999827125); +#379423 = AXIS2_PLACEMENT_3D('',#379424,#379425,#379426); +#379424 = CARTESIAN_POINT('',(138.97000017287,-77.51499982712,0.)); +#379425 = DIRECTION('',(0.,0.,-1.)); +#379426 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#379427 = CYLINDRICAL_SURFACE('',#379428,0.139999827125); +#379428 = AXIS2_PLACEMENT_3D('',#379429,#379430,#379431); +#379429 = CARTESIAN_POINT('',(138.97000017287,-77.51499982712,0.)); +#379430 = DIRECTION('',(-0.,-0.,1.)); +#379431 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#379432 = ADVANCED_FACE('',(#379433),#379458,.F.); +#379433 = FACE_BOUND('',#379434,.F.); +#379434 = EDGE_LOOP('',(#379435,#379436,#379444,#379452)); +#379435 = ORIENTED_EDGE('',*,*,#379413,.T.); +#379436 = ORIENTED_EDGE('',*,*,#379437,.T.); +#379437 = EDGE_CURVE('',#379405,#379438,#379440,.T.); +#379438 = VERTEX_POINT('',#379439); +#379439 = CARTESIAN_POINT('',(139.11,-77.795,-4.E-02)); +#379440 = LINE('',#379441,#379442); +#379441 = CARTESIAN_POINT('',(139.11,-77.515,-4.E-02)); +#379442 = VECTOR('',#379443,1.); +#379443 = DIRECTION('',(0.,-1.,0.)); +#379444 = ORIENTED_EDGE('',*,*,#379445,.F.); +#379445 = EDGE_CURVE('',#379446,#379438,#379448,.T.); +#379446 = VERTEX_POINT('',#379447); +#379447 = CARTESIAN_POINT('',(139.11,-77.795,0.)); +#379448 = LINE('',#379449,#379450); +#379449 = CARTESIAN_POINT('',(139.11,-77.795,0.)); +#379450 = VECTOR('',#379451,1.); +#379451 = DIRECTION('',(0.,0.,-1.)); +#379452 = ORIENTED_EDGE('',*,*,#379453,.F.); +#379453 = EDGE_CURVE('',#379414,#379446,#379454,.T.); +#379454 = LINE('',#379455,#379456); +#379455 = CARTESIAN_POINT('',(139.11,-77.515,0.)); +#379456 = VECTOR('',#379457,1.); +#379457 = DIRECTION('',(0.,-1.,0.)); +#379458 = PLANE('',#379459); +#379459 = AXIS2_PLACEMENT_3D('',#379460,#379461,#379462); +#379460 = CARTESIAN_POINT('',(139.11,-77.515,0.)); +#379461 = DIRECTION('',(-1.,-0.,-0.)); +#379462 = DIRECTION('',(0.,-1.,0.)); +#379463 = ADVANCED_FACE('',(#379464),#379491,.T.); +#379464 = FACE_BOUND('',#379465,.F.); +#379465 = EDGE_LOOP('',(#379466,#379467,#379476,#379484)); +#379466 = ORIENTED_EDGE('',*,*,#379445,.T.); +#379467 = ORIENTED_EDGE('',*,*,#379468,.T.); +#379468 = EDGE_CURVE('',#379438,#379469,#379471,.T.); +#379469 = VERTEX_POINT('',#379470); +#379470 = CARTESIAN_POINT('',(138.97,-77.935,-4.E-02)); +#379471 = CIRCLE('',#379472,0.139999827125); +#379472 = AXIS2_PLACEMENT_3D('',#379473,#379474,#379475); +#379473 = CARTESIAN_POINT('',(138.97000017287,-77.79500017287,-4.E-02)); +#379474 = DIRECTION('',(0.,0.,-1.)); +#379475 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#379476 = ORIENTED_EDGE('',*,*,#379477,.F.); +#379477 = EDGE_CURVE('',#379478,#379469,#379480,.T.); +#379478 = VERTEX_POINT('',#379479); +#379479 = CARTESIAN_POINT('',(138.97,-77.935,0.)); +#379480 = LINE('',#379481,#379482); +#379481 = CARTESIAN_POINT('',(138.97,-77.935,0.)); +#379482 = VECTOR('',#379483,1.); +#379483 = DIRECTION('',(0.,0.,-1.)); +#379484 = ORIENTED_EDGE('',*,*,#379485,.F.); +#379485 = EDGE_CURVE('',#379446,#379478,#379486,.T.); +#379486 = CIRCLE('',#379487,0.139999827125); +#379487 = AXIS2_PLACEMENT_3D('',#379488,#379489,#379490); +#379488 = CARTESIAN_POINT('',(138.97000017287,-77.79500017287,0.)); +#379489 = DIRECTION('',(0.,0.,-1.)); +#379490 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#379491 = CYLINDRICAL_SURFACE('',#379492,0.139999827125); +#379492 = AXIS2_PLACEMENT_3D('',#379493,#379494,#379495); +#379493 = CARTESIAN_POINT('',(138.97000017287,-77.79500017287,0.)); +#379494 = DIRECTION('',(-0.,-0.,1.)); +#379495 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#379496 = ADVANCED_FACE('',(#379497),#379522,.F.); +#379497 = FACE_BOUND('',#379498,.F.); +#379498 = EDGE_LOOP('',(#379499,#379500,#379508,#379516)); +#379499 = ORIENTED_EDGE('',*,*,#379477,.T.); +#379500 = ORIENTED_EDGE('',*,*,#379501,.T.); +#379501 = EDGE_CURVE('',#379469,#379502,#379504,.T.); +#379502 = VERTEX_POINT('',#379503); +#379503 = CARTESIAN_POINT('',(138.63,-77.935,-4.E-02)); +#379504 = LINE('',#379505,#379506); +#379505 = CARTESIAN_POINT('',(138.97,-77.935,-4.E-02)); +#379506 = VECTOR('',#379507,1.); +#379507 = DIRECTION('',(-1.,0.,0.)); +#379508 = ORIENTED_EDGE('',*,*,#379509,.F.); +#379509 = EDGE_CURVE('',#379510,#379502,#379512,.T.); +#379510 = VERTEX_POINT('',#379511); +#379511 = CARTESIAN_POINT('',(138.63,-77.935,0.)); +#379512 = LINE('',#379513,#379514); +#379513 = CARTESIAN_POINT('',(138.63,-77.935,0.)); +#379514 = VECTOR('',#379515,1.); +#379515 = DIRECTION('',(0.,0.,-1.)); +#379516 = ORIENTED_EDGE('',*,*,#379517,.F.); +#379517 = EDGE_CURVE('',#379478,#379510,#379518,.T.); +#379518 = LINE('',#379519,#379520); +#379519 = CARTESIAN_POINT('',(138.97,-77.935,0.)); +#379520 = VECTOR('',#379521,1.); +#379521 = DIRECTION('',(-1.,0.,0.)); +#379522 = PLANE('',#379523); +#379523 = AXIS2_PLACEMENT_3D('',#379524,#379525,#379526); +#379524 = CARTESIAN_POINT('',(138.97,-77.935,0.)); +#379525 = DIRECTION('',(0.,1.,0.)); +#379526 = DIRECTION('',(-1.,0.,0.)); +#379527 = ADVANCED_FACE('',(#379528),#379555,.T.); +#379528 = FACE_BOUND('',#379529,.F.); +#379529 = EDGE_LOOP('',(#379530,#379531,#379540,#379548)); +#379530 = ORIENTED_EDGE('',*,*,#379509,.T.); +#379531 = ORIENTED_EDGE('',*,*,#379532,.T.); +#379532 = EDGE_CURVE('',#379502,#379533,#379535,.T.); +#379533 = VERTEX_POINT('',#379534); +#379534 = CARTESIAN_POINT('',(138.49,-77.795,-4.E-02)); +#379535 = CIRCLE('',#379536,0.139999827125); +#379536 = AXIS2_PLACEMENT_3D('',#379537,#379538,#379539); +#379537 = CARTESIAN_POINT('',(138.62999982712,-77.79500017287,-4.E-02)); +#379538 = DIRECTION('',(0.,0.,-1.)); +#379539 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#379540 = ORIENTED_EDGE('',*,*,#379541,.F.); +#379541 = EDGE_CURVE('',#379542,#379533,#379544,.T.); +#379542 = VERTEX_POINT('',#379543); +#379543 = CARTESIAN_POINT('',(138.49,-77.795,0.)); +#379544 = LINE('',#379545,#379546); +#379545 = CARTESIAN_POINT('',(138.49,-77.795,0.)); +#379546 = VECTOR('',#379547,1.); +#379547 = DIRECTION('',(0.,0.,-1.)); +#379548 = ORIENTED_EDGE('',*,*,#379549,.F.); +#379549 = EDGE_CURVE('',#379510,#379542,#379550,.T.); +#379550 = CIRCLE('',#379551,0.139999827125); +#379551 = AXIS2_PLACEMENT_3D('',#379552,#379553,#379554); +#379552 = CARTESIAN_POINT('',(138.62999982712,-77.79500017287,0.)); +#379553 = DIRECTION('',(0.,0.,-1.)); +#379554 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#379555 = CYLINDRICAL_SURFACE('',#379556,0.139999827125); +#379556 = AXIS2_PLACEMENT_3D('',#379557,#379558,#379559); +#379557 = CARTESIAN_POINT('',(138.62999982712,-77.79500017287,0.)); +#379558 = DIRECTION('',(-0.,-0.,1.)); +#379559 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#379560 = ADVANCED_FACE('',(#379561),#379577,.F.); +#379561 = FACE_BOUND('',#379562,.F.); +#379562 = EDGE_LOOP('',(#379563,#379564,#379570,#379571)); +#379563 = ORIENTED_EDGE('',*,*,#379541,.T.); +#379564 = ORIENTED_EDGE('',*,*,#379565,.T.); +#379565 = EDGE_CURVE('',#379533,#379333,#379566,.T.); +#379566 = LINE('',#379567,#379568); +#379567 = CARTESIAN_POINT('',(138.49,-77.795,-4.E-02)); +#379568 = VECTOR('',#379569,1.); +#379569 = DIRECTION('',(0.,1.,0.)); +#379570 = ORIENTED_EDGE('',*,*,#379330,.F.); +#379571 = ORIENTED_EDGE('',*,*,#379572,.F.); +#379572 = EDGE_CURVE('',#379542,#379331,#379573,.T.); +#379573 = LINE('',#379574,#379575); +#379574 = CARTESIAN_POINT('',(138.49,-77.795,0.)); +#379575 = VECTOR('',#379576,1.); +#379576 = DIRECTION('',(0.,1.,0.)); +#379577 = PLANE('',#379578); +#379578 = AXIS2_PLACEMENT_3D('',#379579,#379580,#379581); +#379579 = CARTESIAN_POINT('',(138.49,-77.795,0.)); +#379580 = DIRECTION('',(1.,-0.,0.)); +#379581 = DIRECTION('',(0.,1.,0.)); +#379582 = ADVANCED_FACE('',(#379583),#379593,.F.); +#379583 = FACE_BOUND('',#379584,.F.); +#379584 = EDGE_LOOP('',(#379585,#379586,#379587,#379588,#379589,#379590, + #379591,#379592)); +#379585 = ORIENTED_EDGE('',*,*,#379357,.T.); +#379586 = ORIENTED_EDGE('',*,*,#379389,.T.); +#379587 = ORIENTED_EDGE('',*,*,#379421,.T.); +#379588 = ORIENTED_EDGE('',*,*,#379453,.T.); +#379589 = ORIENTED_EDGE('',*,*,#379485,.T.); +#379590 = ORIENTED_EDGE('',*,*,#379517,.T.); +#379591 = ORIENTED_EDGE('',*,*,#379549,.T.); +#379592 = ORIENTED_EDGE('',*,*,#379572,.T.); +#379593 = PLANE('',#379594); +#379594 = AXIS2_PLACEMENT_3D('',#379595,#379596,#379597); +#379595 = CARTESIAN_POINT('',(0.,0.,0.)); +#379596 = DIRECTION('',(-0.,-0.,-1.)); +#379597 = DIRECTION('',(-1.,0.,0.)); +#379598 = ADVANCED_FACE('',(#379599),#379609,.T.); +#379599 = FACE_BOUND('',#379600,.T.); +#379600 = EDGE_LOOP('',(#379601,#379602,#379603,#379604,#379605,#379606, + #379607,#379608)); +#379601 = ORIENTED_EDGE('',*,*,#379340,.T.); +#379602 = ORIENTED_EDGE('',*,*,#379373,.T.); +#379603 = ORIENTED_EDGE('',*,*,#379404,.T.); +#379604 = ORIENTED_EDGE('',*,*,#379437,.T.); +#379605 = ORIENTED_EDGE('',*,*,#379468,.T.); +#379606 = ORIENTED_EDGE('',*,*,#379501,.T.); +#379607 = ORIENTED_EDGE('',*,*,#379532,.T.); +#379608 = ORIENTED_EDGE('',*,*,#379565,.T.); +#379609 = PLANE('',#379610); +#379610 = AXIS2_PLACEMENT_3D('',#379611,#379612,#379613); +#379611 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#379612 = DIRECTION('',(-0.,-0.,-1.)); +#379613 = DIRECTION('',(-1.,0.,0.)); +#379614 = MANIFOLD_SOLID_BREP('',#379615); +#379615 = CLOSED_SHELL('',(#379616,#379656,#379687,#379718,#379740, + #379752)); +#379616 = ADVANCED_FACE('',(#379617),#379651,.F.); +#379617 = FACE_BOUND('',#379618,.F.); +#379618 = EDGE_LOOP('',(#379619,#379629,#379637,#379645)); +#379619 = ORIENTED_EDGE('',*,*,#379620,.T.); +#379620 = EDGE_CURVE('',#379621,#379623,#379625,.T.); +#379621 = VERTEX_POINT('',#379622); +#379622 = CARTESIAN_POINT('',(124.25,-111.8,0.)); +#379623 = VERTEX_POINT('',#379624); +#379624 = CARTESIAN_POINT('',(124.25,-111.8,-4.E-02)); +#379625 = LINE('',#379626,#379627); +#379626 = CARTESIAN_POINT('',(124.25,-111.8,0.)); +#379627 = VECTOR('',#379628,1.); +#379628 = DIRECTION('',(0.,0.,-1.)); +#379629 = ORIENTED_EDGE('',*,*,#379630,.T.); +#379630 = EDGE_CURVE('',#379623,#379631,#379633,.T.); +#379631 = VERTEX_POINT('',#379632); +#379632 = CARTESIAN_POINT('',(124.25,-108.2,-4.E-02)); +#379633 = LINE('',#379634,#379635); +#379634 = CARTESIAN_POINT('',(124.25,-111.8,-4.E-02)); +#379635 = VECTOR('',#379636,1.); +#379636 = DIRECTION('',(0.,1.,0.)); +#379637 = ORIENTED_EDGE('',*,*,#379638,.F.); +#379638 = EDGE_CURVE('',#379639,#379631,#379641,.T.); +#379639 = VERTEX_POINT('',#379640); +#379640 = CARTESIAN_POINT('',(124.25,-108.2,0.)); +#379641 = LINE('',#379642,#379643); +#379642 = CARTESIAN_POINT('',(124.25,-108.2,0.)); +#379643 = VECTOR('',#379644,1.); +#379644 = DIRECTION('',(0.,0.,-1.)); +#379645 = ORIENTED_EDGE('',*,*,#379646,.F.); +#379646 = EDGE_CURVE('',#379621,#379639,#379647,.T.); +#379647 = LINE('',#379648,#379649); +#379648 = CARTESIAN_POINT('',(124.25,-111.8,0.)); +#379649 = VECTOR('',#379650,1.); +#379650 = DIRECTION('',(0.,1.,0.)); +#379651 = PLANE('',#379652); +#379652 = AXIS2_PLACEMENT_3D('',#379653,#379654,#379655); +#379653 = CARTESIAN_POINT('',(124.25,-111.8,0.)); +#379654 = DIRECTION('',(1.,-0.,0.)); +#379655 = DIRECTION('',(0.,1.,0.)); +#379656 = ADVANCED_FACE('',(#379657),#379682,.F.); +#379657 = FACE_BOUND('',#379658,.F.); +#379658 = EDGE_LOOP('',(#379659,#379660,#379668,#379676)); +#379659 = ORIENTED_EDGE('',*,*,#379638,.T.); +#379660 = ORIENTED_EDGE('',*,*,#379661,.T.); +#379661 = EDGE_CURVE('',#379631,#379662,#379664,.T.); +#379662 = VERTEX_POINT('',#379663); +#379663 = CARTESIAN_POINT('',(125.75,-108.2,-4.E-02)); +#379664 = LINE('',#379665,#379666); +#379665 = CARTESIAN_POINT('',(124.25,-108.2,-4.E-02)); +#379666 = VECTOR('',#379667,1.); +#379667 = DIRECTION('',(1.,0.,0.)); +#379668 = ORIENTED_EDGE('',*,*,#379669,.F.); +#379669 = EDGE_CURVE('',#379670,#379662,#379672,.T.); +#379670 = VERTEX_POINT('',#379671); +#379671 = CARTESIAN_POINT('',(125.75,-108.2,0.)); +#379672 = LINE('',#379673,#379674); +#379673 = CARTESIAN_POINT('',(125.75,-108.2,0.)); +#379674 = VECTOR('',#379675,1.); +#379675 = DIRECTION('',(0.,0.,-1.)); +#379676 = ORIENTED_EDGE('',*,*,#379677,.F.); +#379677 = EDGE_CURVE('',#379639,#379670,#379678,.T.); +#379678 = LINE('',#379679,#379680); +#379679 = CARTESIAN_POINT('',(124.25,-108.2,0.)); +#379680 = VECTOR('',#379681,1.); +#379681 = DIRECTION('',(1.,0.,0.)); +#379682 = PLANE('',#379683); +#379683 = AXIS2_PLACEMENT_3D('',#379684,#379685,#379686); +#379684 = CARTESIAN_POINT('',(124.25,-108.2,0.)); +#379685 = DIRECTION('',(0.,-1.,0.)); +#379686 = DIRECTION('',(1.,0.,0.)); +#379687 = ADVANCED_FACE('',(#379688),#379713,.F.); +#379688 = FACE_BOUND('',#379689,.F.); +#379689 = EDGE_LOOP('',(#379690,#379691,#379699,#379707)); +#379690 = ORIENTED_EDGE('',*,*,#379669,.T.); +#379691 = ORIENTED_EDGE('',*,*,#379692,.T.); +#379692 = EDGE_CURVE('',#379662,#379693,#379695,.T.); +#379693 = VERTEX_POINT('',#379694); +#379694 = CARTESIAN_POINT('',(125.75,-111.8,-4.E-02)); +#379695 = LINE('',#379696,#379697); +#379696 = CARTESIAN_POINT('',(125.75,-108.2,-4.E-02)); +#379697 = VECTOR('',#379698,1.); +#379698 = DIRECTION('',(0.,-1.,0.)); +#379699 = ORIENTED_EDGE('',*,*,#379700,.F.); +#379700 = EDGE_CURVE('',#379701,#379693,#379703,.T.); +#379701 = VERTEX_POINT('',#379702); +#379702 = CARTESIAN_POINT('',(125.75,-111.8,0.)); +#379703 = LINE('',#379704,#379705); +#379704 = CARTESIAN_POINT('',(125.75,-111.8,0.)); +#379705 = VECTOR('',#379706,1.); +#379706 = DIRECTION('',(0.,0.,-1.)); +#379707 = ORIENTED_EDGE('',*,*,#379708,.F.); +#379708 = EDGE_CURVE('',#379670,#379701,#379709,.T.); +#379709 = LINE('',#379710,#379711); +#379710 = CARTESIAN_POINT('',(125.75,-108.2,0.)); +#379711 = VECTOR('',#379712,1.); +#379712 = DIRECTION('',(0.,-1.,0.)); +#379713 = PLANE('',#379714); +#379714 = AXIS2_PLACEMENT_3D('',#379715,#379716,#379717); +#379715 = CARTESIAN_POINT('',(125.75,-108.2,0.)); +#379716 = DIRECTION('',(-1.,-0.,-0.)); +#379717 = DIRECTION('',(0.,-1.,0.)); +#379718 = ADVANCED_FACE('',(#379719),#379735,.F.); +#379719 = FACE_BOUND('',#379720,.F.); +#379720 = EDGE_LOOP('',(#379721,#379722,#379728,#379729)); +#379721 = ORIENTED_EDGE('',*,*,#379700,.T.); +#379722 = ORIENTED_EDGE('',*,*,#379723,.T.); +#379723 = EDGE_CURVE('',#379693,#379623,#379724,.T.); +#379724 = LINE('',#379725,#379726); +#379725 = CARTESIAN_POINT('',(125.75,-111.8,-4.E-02)); +#379726 = VECTOR('',#379727,1.); +#379727 = DIRECTION('',(-1.,0.,0.)); +#379728 = ORIENTED_EDGE('',*,*,#379620,.F.); +#379729 = ORIENTED_EDGE('',*,*,#379730,.F.); +#379730 = EDGE_CURVE('',#379701,#379621,#379731,.T.); +#379731 = LINE('',#379732,#379733); +#379732 = CARTESIAN_POINT('',(125.75,-111.8,0.)); +#379733 = VECTOR('',#379734,1.); +#379734 = DIRECTION('',(-1.,0.,0.)); +#379735 = PLANE('',#379736); +#379736 = AXIS2_PLACEMENT_3D('',#379737,#379738,#379739); +#379737 = CARTESIAN_POINT('',(125.75,-111.8,0.)); +#379738 = DIRECTION('',(0.,1.,0.)); +#379739 = DIRECTION('',(-1.,0.,0.)); +#379740 = ADVANCED_FACE('',(#379741),#379747,.F.); +#379741 = FACE_BOUND('',#379742,.F.); +#379742 = EDGE_LOOP('',(#379743,#379744,#379745,#379746)); +#379743 = ORIENTED_EDGE('',*,*,#379646,.T.); +#379744 = ORIENTED_EDGE('',*,*,#379677,.T.); +#379745 = ORIENTED_EDGE('',*,*,#379708,.T.); +#379746 = ORIENTED_EDGE('',*,*,#379730,.T.); +#379747 = PLANE('',#379748); +#379748 = AXIS2_PLACEMENT_3D('',#379749,#379750,#379751); +#379749 = CARTESIAN_POINT('',(0.,0.,0.)); +#379750 = DIRECTION('',(-0.,-0.,-1.)); +#379751 = DIRECTION('',(-1.,0.,0.)); +#379752 = ADVANCED_FACE('',(#379753),#379759,.T.); +#379753 = FACE_BOUND('',#379754,.T.); +#379754 = EDGE_LOOP('',(#379755,#379756,#379757,#379758)); +#379755 = ORIENTED_EDGE('',*,*,#379630,.T.); +#379756 = ORIENTED_EDGE('',*,*,#379661,.T.); +#379757 = ORIENTED_EDGE('',*,*,#379692,.T.); +#379758 = ORIENTED_EDGE('',*,*,#379723,.T.); +#379759 = PLANE('',#379760); +#379760 = AXIS2_PLACEMENT_3D('',#379761,#379762,#379763); +#379761 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#379762 = DIRECTION('',(-0.,-0.,-1.)); +#379763 = DIRECTION('',(-1.,0.,0.)); +#379764 = MANIFOLD_SOLID_BREP('',#379765); +#379765 = CLOSED_SHELL('',(#379766,#379808,#379839,#379872,#379903, + #379936,#379967,#380000,#380022,#380038)); +#379766 = ADVANCED_FACE('',(#379767),#379803,.T.); +#379767 = FACE_BOUND('',#379768,.F.); +#379768 = EDGE_LOOP('',(#379769,#379779,#379788,#379796)); +#379769 = ORIENTED_EDGE('',*,*,#379770,.T.); +#379770 = EDGE_CURVE('',#379771,#379773,#379775,.T.); +#379771 = VERTEX_POINT('',#379772); +#379772 = CARTESIAN_POINT('',(136.1625,-71.95,0.)); +#379773 = VERTEX_POINT('',#379774); +#379774 = CARTESIAN_POINT('',(136.1625,-71.95,-4.E-02)); +#379775 = LINE('',#379776,#379777); +#379776 = CARTESIAN_POINT('',(136.1625,-71.95,0.)); +#379777 = VECTOR('',#379778,1.); +#379778 = DIRECTION('',(0.,0.,-1.)); +#379779 = ORIENTED_EDGE('',*,*,#379780,.T.); +#379780 = EDGE_CURVE('',#379773,#379781,#379783,.T.); +#379781 = VERTEX_POINT('',#379782); +#379782 = CARTESIAN_POINT('',(136.3125,-71.8,-4.E-02)); +#379783 = CIRCLE('',#379784,0.150000058649); +#379784 = AXIS2_PLACEMENT_3D('',#379785,#379786,#379787); +#379785 = CARTESIAN_POINT('',(136.31250005864,-71.95000005864,-4.E-02)); +#379786 = DIRECTION('',(0.,0.,-1.)); +#379787 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#379788 = ORIENTED_EDGE('',*,*,#379789,.F.); +#379789 = EDGE_CURVE('',#379790,#379781,#379792,.T.); +#379790 = VERTEX_POINT('',#379791); +#379791 = CARTESIAN_POINT('',(136.3125,-71.8,0.)); +#379792 = LINE('',#379793,#379794); +#379793 = CARTESIAN_POINT('',(136.3125,-71.8,0.)); +#379794 = VECTOR('',#379795,1.); +#379795 = DIRECTION('',(0.,0.,-1.)); +#379796 = ORIENTED_EDGE('',*,*,#379797,.F.); +#379797 = EDGE_CURVE('',#379771,#379790,#379798,.T.); +#379798 = CIRCLE('',#379799,0.150000058649); +#379799 = AXIS2_PLACEMENT_3D('',#379800,#379801,#379802); +#379800 = CARTESIAN_POINT('',(136.31250005864,-71.95000005864,0.)); +#379801 = DIRECTION('',(0.,0.,-1.)); +#379802 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#379803 = CYLINDRICAL_SURFACE('',#379804,0.150000058649); +#379804 = AXIS2_PLACEMENT_3D('',#379805,#379806,#379807); +#379805 = CARTESIAN_POINT('',(136.31250005864,-71.95000005864,0.)); +#379806 = DIRECTION('',(-0.,-0.,1.)); +#379807 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#379808 = ADVANCED_FACE('',(#379809),#379834,.F.); +#379809 = FACE_BOUND('',#379810,.F.); +#379810 = EDGE_LOOP('',(#379811,#379812,#379820,#379828)); +#379811 = ORIENTED_EDGE('',*,*,#379789,.T.); +#379812 = ORIENTED_EDGE('',*,*,#379813,.T.); +#379813 = EDGE_CURVE('',#379781,#379814,#379816,.T.); +#379814 = VERTEX_POINT('',#379815); +#379815 = CARTESIAN_POINT('',(137.4875,-71.8,-4.E-02)); +#379816 = LINE('',#379817,#379818); +#379817 = CARTESIAN_POINT('',(136.3125,-71.8,-4.E-02)); +#379818 = VECTOR('',#379819,1.); +#379819 = DIRECTION('',(1.,0.,0.)); +#379820 = ORIENTED_EDGE('',*,*,#379821,.F.); +#379821 = EDGE_CURVE('',#379822,#379814,#379824,.T.); +#379822 = VERTEX_POINT('',#379823); +#379823 = CARTESIAN_POINT('',(137.4875,-71.8,0.)); +#379824 = LINE('',#379825,#379826); +#379825 = CARTESIAN_POINT('',(137.4875,-71.8,0.)); +#379826 = VECTOR('',#379827,1.); +#379827 = DIRECTION('',(0.,0.,-1.)); +#379828 = ORIENTED_EDGE('',*,*,#379829,.F.); +#379829 = EDGE_CURVE('',#379790,#379822,#379830,.T.); +#379830 = LINE('',#379831,#379832); +#379831 = CARTESIAN_POINT('',(136.3125,-71.8,0.)); +#379832 = VECTOR('',#379833,1.); +#379833 = DIRECTION('',(1.,0.,0.)); +#379834 = PLANE('',#379835); +#379835 = AXIS2_PLACEMENT_3D('',#379836,#379837,#379838); +#379836 = CARTESIAN_POINT('',(136.3125,-71.8,0.)); +#379837 = DIRECTION('',(0.,-1.,0.)); +#379838 = DIRECTION('',(1.,0.,0.)); +#379839 = ADVANCED_FACE('',(#379840),#379867,.T.); +#379840 = FACE_BOUND('',#379841,.F.); +#379841 = EDGE_LOOP('',(#379842,#379843,#379852,#379860)); +#379842 = ORIENTED_EDGE('',*,*,#379821,.T.); +#379843 = ORIENTED_EDGE('',*,*,#379844,.T.); +#379844 = EDGE_CURVE('',#379814,#379845,#379847,.T.); +#379845 = VERTEX_POINT('',#379846); +#379846 = CARTESIAN_POINT('',(137.6375,-71.95,-4.E-02)); +#379847 = CIRCLE('',#379848,0.150000058649); +#379848 = AXIS2_PLACEMENT_3D('',#379849,#379850,#379851); +#379849 = CARTESIAN_POINT('',(137.48749994135,-71.95000005864,-4.E-02)); +#379850 = DIRECTION('',(0.,0.,-1.)); +#379851 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#379852 = ORIENTED_EDGE('',*,*,#379853,.F.); +#379853 = EDGE_CURVE('',#379854,#379845,#379856,.T.); +#379854 = VERTEX_POINT('',#379855); +#379855 = CARTESIAN_POINT('',(137.6375,-71.95,0.)); +#379856 = LINE('',#379857,#379858); +#379857 = CARTESIAN_POINT('',(137.6375,-71.95,0.)); +#379858 = VECTOR('',#379859,1.); +#379859 = DIRECTION('',(0.,0.,-1.)); +#379860 = ORIENTED_EDGE('',*,*,#379861,.F.); +#379861 = EDGE_CURVE('',#379822,#379854,#379862,.T.); +#379862 = CIRCLE('',#379863,0.150000058649); +#379863 = AXIS2_PLACEMENT_3D('',#379864,#379865,#379866); +#379864 = CARTESIAN_POINT('',(137.48749994135,-71.95000005864,0.)); +#379865 = DIRECTION('',(0.,0.,-1.)); +#379866 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#379867 = CYLINDRICAL_SURFACE('',#379868,0.150000058649); +#379868 = AXIS2_PLACEMENT_3D('',#379869,#379870,#379871); +#379869 = CARTESIAN_POINT('',(137.48749994135,-71.95000005864,0.)); +#379870 = DIRECTION('',(-0.,-0.,1.)); +#379871 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#379872 = ADVANCED_FACE('',(#379873),#379898,.F.); +#379873 = FACE_BOUND('',#379874,.F.); +#379874 = EDGE_LOOP('',(#379875,#379876,#379884,#379892)); +#379875 = ORIENTED_EDGE('',*,*,#379853,.T.); +#379876 = ORIENTED_EDGE('',*,*,#379877,.T.); +#379877 = EDGE_CURVE('',#379845,#379878,#379880,.T.); +#379878 = VERTEX_POINT('',#379879); +#379879 = CARTESIAN_POINT('',(137.6375,-72.25,-4.E-02)); +#379880 = LINE('',#379881,#379882); +#379881 = CARTESIAN_POINT('',(137.6375,-71.95,-4.E-02)); +#379882 = VECTOR('',#379883,1.); +#379883 = DIRECTION('',(0.,-1.,0.)); +#379884 = ORIENTED_EDGE('',*,*,#379885,.F.); +#379885 = EDGE_CURVE('',#379886,#379878,#379888,.T.); +#379886 = VERTEX_POINT('',#379887); +#379887 = CARTESIAN_POINT('',(137.6375,-72.25,0.)); +#379888 = LINE('',#379889,#379890); +#379889 = CARTESIAN_POINT('',(137.6375,-72.25,0.)); +#379890 = VECTOR('',#379891,1.); +#379891 = DIRECTION('',(0.,0.,-1.)); +#379892 = ORIENTED_EDGE('',*,*,#379893,.F.); +#379893 = EDGE_CURVE('',#379854,#379886,#379894,.T.); +#379894 = LINE('',#379895,#379896); +#379895 = CARTESIAN_POINT('',(137.6375,-71.95,0.)); +#379896 = VECTOR('',#379897,1.); +#379897 = DIRECTION('',(0.,-1.,0.)); +#379898 = PLANE('',#379899); +#379899 = AXIS2_PLACEMENT_3D('',#379900,#379901,#379902); +#379900 = CARTESIAN_POINT('',(137.6375,-71.95,0.)); +#379901 = DIRECTION('',(-1.,-0.,-0.)); +#379902 = DIRECTION('',(0.,-1.,0.)); +#379903 = ADVANCED_FACE('',(#379904),#379931,.T.); +#379904 = FACE_BOUND('',#379905,.F.); +#379905 = EDGE_LOOP('',(#379906,#379907,#379916,#379924)); +#379906 = ORIENTED_EDGE('',*,*,#379885,.T.); +#379907 = ORIENTED_EDGE('',*,*,#379908,.T.); +#379908 = EDGE_CURVE('',#379878,#379909,#379911,.T.); +#379909 = VERTEX_POINT('',#379910); +#379910 = CARTESIAN_POINT('',(137.4875,-72.4,-4.E-02)); +#379911 = CIRCLE('',#379912,0.150000058649); +#379912 = AXIS2_PLACEMENT_3D('',#379913,#379914,#379915); +#379913 = CARTESIAN_POINT('',(137.48749994135,-72.24999994135,-4.E-02)); +#379914 = DIRECTION('',(0.,0.,-1.)); +#379915 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#379916 = ORIENTED_EDGE('',*,*,#379917,.F.); +#379917 = EDGE_CURVE('',#379918,#379909,#379920,.T.); +#379918 = VERTEX_POINT('',#379919); +#379919 = CARTESIAN_POINT('',(137.4875,-72.4,0.)); +#379920 = LINE('',#379921,#379922); +#379921 = CARTESIAN_POINT('',(137.4875,-72.4,0.)); +#379922 = VECTOR('',#379923,1.); +#379923 = DIRECTION('',(0.,0.,-1.)); +#379924 = ORIENTED_EDGE('',*,*,#379925,.F.); +#379925 = EDGE_CURVE('',#379886,#379918,#379926,.T.); +#379926 = CIRCLE('',#379927,0.150000058649); +#379927 = AXIS2_PLACEMENT_3D('',#379928,#379929,#379930); +#379928 = CARTESIAN_POINT('',(137.48749994135,-72.24999994135,0.)); +#379929 = DIRECTION('',(0.,0.,-1.)); +#379930 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#379931 = CYLINDRICAL_SURFACE('',#379932,0.150000058649); +#379932 = AXIS2_PLACEMENT_3D('',#379933,#379934,#379935); +#379933 = CARTESIAN_POINT('',(137.48749994135,-72.24999994135,0.)); +#379934 = DIRECTION('',(-0.,-0.,1.)); +#379935 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#379936 = ADVANCED_FACE('',(#379937),#379962,.F.); +#379937 = FACE_BOUND('',#379938,.F.); +#379938 = EDGE_LOOP('',(#379939,#379940,#379948,#379956)); +#379939 = ORIENTED_EDGE('',*,*,#379917,.T.); +#379940 = ORIENTED_EDGE('',*,*,#379941,.T.); +#379941 = EDGE_CURVE('',#379909,#379942,#379944,.T.); +#379942 = VERTEX_POINT('',#379943); +#379943 = CARTESIAN_POINT('',(136.3125,-72.4,-4.E-02)); +#379944 = LINE('',#379945,#379946); +#379945 = CARTESIAN_POINT('',(137.4875,-72.4,-4.E-02)); +#379946 = VECTOR('',#379947,1.); +#379947 = DIRECTION('',(-1.,0.,0.)); +#379948 = ORIENTED_EDGE('',*,*,#379949,.F.); +#379949 = EDGE_CURVE('',#379950,#379942,#379952,.T.); +#379950 = VERTEX_POINT('',#379951); +#379951 = CARTESIAN_POINT('',(136.3125,-72.4,0.)); +#379952 = LINE('',#379953,#379954); +#379953 = CARTESIAN_POINT('',(136.3125,-72.4,0.)); +#379954 = VECTOR('',#379955,1.); +#379955 = DIRECTION('',(0.,0.,-1.)); +#379956 = ORIENTED_EDGE('',*,*,#379957,.F.); +#379957 = EDGE_CURVE('',#379918,#379950,#379958,.T.); +#379958 = LINE('',#379959,#379960); +#379959 = CARTESIAN_POINT('',(137.4875,-72.4,0.)); +#379960 = VECTOR('',#379961,1.); +#379961 = DIRECTION('',(-1.,0.,0.)); +#379962 = PLANE('',#379963); +#379963 = AXIS2_PLACEMENT_3D('',#379964,#379965,#379966); +#379964 = CARTESIAN_POINT('',(137.4875,-72.4,0.)); +#379965 = DIRECTION('',(0.,1.,0.)); +#379966 = DIRECTION('',(-1.,0.,0.)); +#379967 = ADVANCED_FACE('',(#379968),#379995,.T.); +#379968 = FACE_BOUND('',#379969,.F.); +#379969 = EDGE_LOOP('',(#379970,#379971,#379980,#379988)); +#379970 = ORIENTED_EDGE('',*,*,#379949,.T.); +#379971 = ORIENTED_EDGE('',*,*,#379972,.T.); +#379972 = EDGE_CURVE('',#379942,#379973,#379975,.T.); +#379973 = VERTEX_POINT('',#379974); +#379974 = CARTESIAN_POINT('',(136.1625,-72.25,-4.E-02)); +#379975 = CIRCLE('',#379976,0.150000058649); +#379976 = AXIS2_PLACEMENT_3D('',#379977,#379978,#379979); +#379977 = CARTESIAN_POINT('',(136.31250005864,-72.24999994135,-4.E-02)); +#379978 = DIRECTION('',(0.,0.,-1.)); +#379979 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#379980 = ORIENTED_EDGE('',*,*,#379981,.F.); +#379981 = EDGE_CURVE('',#379982,#379973,#379984,.T.); +#379982 = VERTEX_POINT('',#379983); +#379983 = CARTESIAN_POINT('',(136.1625,-72.25,0.)); +#379984 = LINE('',#379985,#379986); +#379985 = CARTESIAN_POINT('',(136.1625,-72.25,0.)); +#379986 = VECTOR('',#379987,1.); +#379987 = DIRECTION('',(0.,0.,-1.)); +#379988 = ORIENTED_EDGE('',*,*,#379989,.F.); +#379989 = EDGE_CURVE('',#379950,#379982,#379990,.T.); +#379990 = CIRCLE('',#379991,0.150000058649); +#379991 = AXIS2_PLACEMENT_3D('',#379992,#379993,#379994); +#379992 = CARTESIAN_POINT('',(136.31250005864,-72.24999994135,0.)); +#379993 = DIRECTION('',(0.,0.,-1.)); +#379994 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#379995 = CYLINDRICAL_SURFACE('',#379996,0.150000058649); +#379996 = AXIS2_PLACEMENT_3D('',#379997,#379998,#379999); +#379997 = CARTESIAN_POINT('',(136.31250005864,-72.24999994135,0.)); +#379998 = DIRECTION('',(-0.,-0.,1.)); +#379999 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#380000 = ADVANCED_FACE('',(#380001),#380017,.F.); +#380001 = FACE_BOUND('',#380002,.F.); +#380002 = EDGE_LOOP('',(#380003,#380004,#380010,#380011)); +#380003 = ORIENTED_EDGE('',*,*,#379981,.T.); +#380004 = ORIENTED_EDGE('',*,*,#380005,.T.); +#380005 = EDGE_CURVE('',#379973,#379773,#380006,.T.); +#380006 = LINE('',#380007,#380008); +#380007 = CARTESIAN_POINT('',(136.1625,-72.25,-4.E-02)); +#380008 = VECTOR('',#380009,1.); +#380009 = DIRECTION('',(0.,1.,0.)); +#380010 = ORIENTED_EDGE('',*,*,#379770,.F.); +#380011 = ORIENTED_EDGE('',*,*,#380012,.F.); +#380012 = EDGE_CURVE('',#379982,#379771,#380013,.T.); +#380013 = LINE('',#380014,#380015); +#380014 = CARTESIAN_POINT('',(136.1625,-72.25,0.)); +#380015 = VECTOR('',#380016,1.); +#380016 = DIRECTION('',(0.,1.,0.)); +#380017 = PLANE('',#380018); +#380018 = AXIS2_PLACEMENT_3D('',#380019,#380020,#380021); +#380019 = CARTESIAN_POINT('',(136.1625,-72.25,0.)); +#380020 = DIRECTION('',(1.,-0.,0.)); +#380021 = DIRECTION('',(0.,1.,0.)); +#380022 = ADVANCED_FACE('',(#380023),#380033,.F.); +#380023 = FACE_BOUND('',#380024,.F.); +#380024 = EDGE_LOOP('',(#380025,#380026,#380027,#380028,#380029,#380030, + #380031,#380032)); +#380025 = ORIENTED_EDGE('',*,*,#379797,.T.); +#380026 = ORIENTED_EDGE('',*,*,#379829,.T.); +#380027 = ORIENTED_EDGE('',*,*,#379861,.T.); +#380028 = ORIENTED_EDGE('',*,*,#379893,.T.); +#380029 = ORIENTED_EDGE('',*,*,#379925,.T.); +#380030 = ORIENTED_EDGE('',*,*,#379957,.T.); +#380031 = ORIENTED_EDGE('',*,*,#379989,.T.); +#380032 = ORIENTED_EDGE('',*,*,#380012,.T.); +#380033 = PLANE('',#380034); +#380034 = AXIS2_PLACEMENT_3D('',#380035,#380036,#380037); +#380035 = CARTESIAN_POINT('',(0.,0.,0.)); +#380036 = DIRECTION('',(-0.,-0.,-1.)); +#380037 = DIRECTION('',(-1.,0.,0.)); +#380038 = ADVANCED_FACE('',(#380039),#380049,.T.); +#380039 = FACE_BOUND('',#380040,.T.); +#380040 = EDGE_LOOP('',(#380041,#380042,#380043,#380044,#380045,#380046, + #380047,#380048)); +#380041 = ORIENTED_EDGE('',*,*,#379780,.T.); +#380042 = ORIENTED_EDGE('',*,*,#379813,.T.); +#380043 = ORIENTED_EDGE('',*,*,#379844,.T.); +#380044 = ORIENTED_EDGE('',*,*,#379877,.T.); +#380045 = ORIENTED_EDGE('',*,*,#379908,.T.); +#380046 = ORIENTED_EDGE('',*,*,#379941,.T.); +#380047 = ORIENTED_EDGE('',*,*,#379972,.T.); +#380048 = ORIENTED_EDGE('',*,*,#380005,.T.); +#380049 = PLANE('',#380050); +#380050 = AXIS2_PLACEMENT_3D('',#380051,#380052,#380053); +#380051 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#380052 = DIRECTION('',(-0.,-0.,-1.)); +#380053 = DIRECTION('',(-1.,0.,0.)); +#380054 = MANIFOLD_SOLID_BREP('',#380055); +#380055 = CLOSED_SHELL('',(#380056,#380096,#380127,#380158,#380180, + #380192)); +#380056 = ADVANCED_FACE('',(#380057),#380091,.T.); +#380057 = FACE_BOUND('',#380058,.T.); +#380058 = EDGE_LOOP('',(#380059,#380069,#380077,#380085)); +#380059 = ORIENTED_EDGE('',*,*,#380060,.T.); +#380060 = EDGE_CURVE('',#380061,#380063,#380065,.T.); +#380061 = VERTEX_POINT('',#380062); +#380062 = CARTESIAN_POINT('',(131.835,-83.16,1.51)); +#380063 = VERTEX_POINT('',#380064); +#380064 = CARTESIAN_POINT('',(131.835,-83.16,1.55)); +#380065 = LINE('',#380066,#380067); +#380066 = CARTESIAN_POINT('',(131.835,-83.16,1.51)); +#380067 = VECTOR('',#380068,1.); +#380068 = DIRECTION('',(0.,0.,1.)); +#380069 = ORIENTED_EDGE('',*,*,#380070,.T.); +#380070 = EDGE_CURVE('',#380063,#380071,#380073,.T.); +#380071 = VERTEX_POINT('',#380072); +#380072 = CARTESIAN_POINT('',(131.835,-81.66,1.55)); +#380073 = LINE('',#380074,#380075); +#380074 = CARTESIAN_POINT('',(131.835,-83.16,1.55)); +#380075 = VECTOR('',#380076,1.); +#380076 = DIRECTION('',(0.,1.,0.)); +#380077 = ORIENTED_EDGE('',*,*,#380078,.F.); +#380078 = EDGE_CURVE('',#380079,#380071,#380081,.T.); +#380079 = VERTEX_POINT('',#380080); +#380080 = CARTESIAN_POINT('',(131.835,-81.66,1.51)); +#380081 = LINE('',#380082,#380083); +#380082 = CARTESIAN_POINT('',(131.835,-81.66,1.51)); +#380083 = VECTOR('',#380084,1.); +#380084 = DIRECTION('',(0.,0.,1.)); +#380085 = ORIENTED_EDGE('',*,*,#380086,.F.); +#380086 = EDGE_CURVE('',#380061,#380079,#380087,.T.); +#380087 = LINE('',#380088,#380089); +#380088 = CARTESIAN_POINT('',(131.835,-83.16,1.51)); +#380089 = VECTOR('',#380090,1.); +#380090 = DIRECTION('',(0.,1.,0.)); +#380091 = PLANE('',#380092); +#380092 = AXIS2_PLACEMENT_3D('',#380093,#380094,#380095); +#380093 = CARTESIAN_POINT('',(131.835,-83.16,1.51)); +#380094 = DIRECTION('',(-1.,0.,0.)); +#380095 = DIRECTION('',(0.,1.,0.)); +#380096 = ADVANCED_FACE('',(#380097),#380122,.T.); +#380097 = FACE_BOUND('',#380098,.T.); +#380098 = EDGE_LOOP('',(#380099,#380100,#380108,#380116)); +#380099 = ORIENTED_EDGE('',*,*,#380078,.T.); +#380100 = ORIENTED_EDGE('',*,*,#380101,.T.); +#380101 = EDGE_CURVE('',#380071,#380102,#380104,.T.); +#380102 = VERTEX_POINT('',#380103); +#380103 = CARTESIAN_POINT('',(132.735,-81.66,1.55)); +#380104 = LINE('',#380105,#380106); +#380105 = CARTESIAN_POINT('',(131.835,-81.66,1.55)); +#380106 = VECTOR('',#380107,1.); +#380107 = DIRECTION('',(1.,0.,0.)); +#380108 = ORIENTED_EDGE('',*,*,#380109,.F.); +#380109 = EDGE_CURVE('',#380110,#380102,#380112,.T.); +#380110 = VERTEX_POINT('',#380111); +#380111 = CARTESIAN_POINT('',(132.735,-81.66,1.51)); +#380112 = LINE('',#380113,#380114); +#380113 = CARTESIAN_POINT('',(132.735,-81.66,1.51)); +#380114 = VECTOR('',#380115,1.); +#380115 = DIRECTION('',(0.,0.,1.)); +#380116 = ORIENTED_EDGE('',*,*,#380117,.F.); +#380117 = EDGE_CURVE('',#380079,#380110,#380118,.T.); +#380118 = LINE('',#380119,#380120); +#380119 = CARTESIAN_POINT('',(131.835,-81.66,1.51)); +#380120 = VECTOR('',#380121,1.); +#380121 = DIRECTION('',(1.,0.,0.)); +#380122 = PLANE('',#380123); +#380123 = AXIS2_PLACEMENT_3D('',#380124,#380125,#380126); +#380124 = CARTESIAN_POINT('',(131.835,-81.66,1.51)); +#380125 = DIRECTION('',(0.,1.,0.)); +#380126 = DIRECTION('',(1.,0.,0.)); +#380127 = ADVANCED_FACE('',(#380128),#380153,.T.); +#380128 = FACE_BOUND('',#380129,.T.); +#380129 = EDGE_LOOP('',(#380130,#380131,#380139,#380147)); +#380130 = ORIENTED_EDGE('',*,*,#380109,.T.); +#380131 = ORIENTED_EDGE('',*,*,#380132,.T.); +#380132 = EDGE_CURVE('',#380102,#380133,#380135,.T.); +#380133 = VERTEX_POINT('',#380134); +#380134 = CARTESIAN_POINT('',(132.735,-83.16,1.55)); +#380135 = LINE('',#380136,#380137); +#380136 = CARTESIAN_POINT('',(132.735,-81.66,1.55)); +#380137 = VECTOR('',#380138,1.); +#380138 = DIRECTION('',(0.,-1.,0.)); +#380139 = ORIENTED_EDGE('',*,*,#380140,.F.); +#380140 = EDGE_CURVE('',#380141,#380133,#380143,.T.); +#380141 = VERTEX_POINT('',#380142); +#380142 = CARTESIAN_POINT('',(132.735,-83.16,1.51)); +#380143 = LINE('',#380144,#380145); +#380144 = CARTESIAN_POINT('',(132.735,-83.16,1.51)); +#380145 = VECTOR('',#380146,1.); +#380146 = DIRECTION('',(0.,0.,1.)); +#380147 = ORIENTED_EDGE('',*,*,#380148,.F.); +#380148 = EDGE_CURVE('',#380110,#380141,#380149,.T.); +#380149 = LINE('',#380150,#380151); +#380150 = CARTESIAN_POINT('',(132.735,-81.66,1.51)); +#380151 = VECTOR('',#380152,1.); +#380152 = DIRECTION('',(0.,-1.,0.)); +#380153 = PLANE('',#380154); +#380154 = AXIS2_PLACEMENT_3D('',#380155,#380156,#380157); +#380155 = CARTESIAN_POINT('',(132.735,-81.66,1.51)); +#380156 = DIRECTION('',(1.,0.,-0.)); +#380157 = DIRECTION('',(0.,-1.,0.)); +#380158 = ADVANCED_FACE('',(#380159),#380175,.T.); +#380159 = FACE_BOUND('',#380160,.T.); +#380160 = EDGE_LOOP('',(#380161,#380162,#380168,#380169)); +#380161 = ORIENTED_EDGE('',*,*,#380140,.T.); +#380162 = ORIENTED_EDGE('',*,*,#380163,.T.); +#380163 = EDGE_CURVE('',#380133,#380063,#380164,.T.); +#380164 = LINE('',#380165,#380166); +#380165 = CARTESIAN_POINT('',(132.735,-83.16,1.55)); +#380166 = VECTOR('',#380167,1.); +#380167 = DIRECTION('',(-1.,0.,0.)); +#380168 = ORIENTED_EDGE('',*,*,#380060,.F.); +#380169 = ORIENTED_EDGE('',*,*,#380170,.F.); +#380170 = EDGE_CURVE('',#380141,#380061,#380171,.T.); +#380171 = LINE('',#380172,#380173); +#380172 = CARTESIAN_POINT('',(132.735,-83.16,1.51)); +#380173 = VECTOR('',#380174,1.); +#380174 = DIRECTION('',(-1.,0.,0.)); +#380175 = PLANE('',#380176); +#380176 = AXIS2_PLACEMENT_3D('',#380177,#380178,#380179); +#380177 = CARTESIAN_POINT('',(132.735,-83.16,1.51)); +#380178 = DIRECTION('',(0.,-1.,0.)); +#380179 = DIRECTION('',(-1.,0.,0.)); +#380180 = ADVANCED_FACE('',(#380181),#380187,.F.); +#380181 = FACE_BOUND('',#380182,.T.); +#380182 = EDGE_LOOP('',(#380183,#380184,#380185,#380186)); +#380183 = ORIENTED_EDGE('',*,*,#380086,.T.); +#380184 = ORIENTED_EDGE('',*,*,#380117,.T.); +#380185 = ORIENTED_EDGE('',*,*,#380148,.T.); +#380186 = ORIENTED_EDGE('',*,*,#380170,.T.); +#380187 = PLANE('',#380188); +#380188 = AXIS2_PLACEMENT_3D('',#380189,#380190,#380191); +#380189 = CARTESIAN_POINT('',(0.,0.,1.51)); +#380190 = DIRECTION('',(0.,0.,1.)); +#380191 = DIRECTION('',(1.,0.,-0.)); +#380192 = ADVANCED_FACE('',(#380193),#380199,.T.); +#380193 = FACE_BOUND('',#380194,.F.); +#380194 = EDGE_LOOP('',(#380195,#380196,#380197,#380198)); +#380195 = ORIENTED_EDGE('',*,*,#380070,.T.); +#380196 = ORIENTED_EDGE('',*,*,#380101,.T.); +#380197 = ORIENTED_EDGE('',*,*,#380132,.T.); +#380198 = ORIENTED_EDGE('',*,*,#380163,.T.); +#380199 = PLANE('',#380200); +#380200 = AXIS2_PLACEMENT_3D('',#380201,#380202,#380203); +#380201 = CARTESIAN_POINT('',(0.,0.,1.55)); +#380202 = DIRECTION('',(0.,0.,1.)); +#380203 = DIRECTION('',(1.,0.,-0.)); +#380204 = MANIFOLD_SOLID_BREP('',#380205); +#380205 = CLOSED_SHELL('',(#380206,#380248,#380279,#380312,#380343, + #380376,#380407,#380440,#380462,#380478)); +#380206 = ADVANCED_FACE('',(#380207),#380243,.T.); +#380207 = FACE_BOUND('',#380208,.F.); +#380208 = EDGE_LOOP('',(#380209,#380219,#380228,#380236)); +#380209 = ORIENTED_EDGE('',*,*,#380210,.T.); +#380210 = EDGE_CURVE('',#380211,#380213,#380215,.T.); +#380211 = VERTEX_POINT('',#380212); +#380212 = CARTESIAN_POINT('',(142.15,-77.975,0.)); +#380213 = VERTEX_POINT('',#380214); +#380214 = CARTESIAN_POINT('',(142.15,-77.975,-4.E-02)); +#380215 = LINE('',#380216,#380217); +#380216 = CARTESIAN_POINT('',(142.15,-77.975,0.)); +#380217 = VECTOR('',#380218,1.); +#380218 = DIRECTION('',(0.,0.,-1.)); +#380219 = ORIENTED_EDGE('',*,*,#380220,.T.); +#380220 = EDGE_CURVE('',#380213,#380221,#380223,.T.); +#380221 = VERTEX_POINT('',#380222); +#380222 = CARTESIAN_POINT('',(142.2375,-77.8875,-4.E-02)); +#380223 = CIRCLE('',#380224,8.749946518206E-02); +#380224 = AXIS2_PLACEMENT_3D('',#380225,#380226,#380227); +#380225 = CARTESIAN_POINT('',(142.23749946518,-77.97499946518,-4.E-02)); +#380226 = DIRECTION('',(0.,0.,-1.)); +#380227 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#380228 = ORIENTED_EDGE('',*,*,#380229,.F.); +#380229 = EDGE_CURVE('',#380230,#380221,#380232,.T.); +#380230 = VERTEX_POINT('',#380231); +#380231 = CARTESIAN_POINT('',(142.2375,-77.8875,0.)); +#380232 = LINE('',#380233,#380234); +#380233 = CARTESIAN_POINT('',(142.2375,-77.8875,0.)); +#380234 = VECTOR('',#380235,1.); +#380235 = DIRECTION('',(0.,0.,-1.)); +#380236 = ORIENTED_EDGE('',*,*,#380237,.F.); +#380237 = EDGE_CURVE('',#380211,#380230,#380238,.T.); +#380238 = CIRCLE('',#380239,8.749946518206E-02); +#380239 = AXIS2_PLACEMENT_3D('',#380240,#380241,#380242); +#380240 = CARTESIAN_POINT('',(142.23749946518,-77.97499946518,0.)); +#380241 = DIRECTION('',(0.,0.,-1.)); +#380242 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#380243 = CYLINDRICAL_SURFACE('',#380244,8.749946518206E-02); +#380244 = AXIS2_PLACEMENT_3D('',#380245,#380246,#380247); +#380245 = CARTESIAN_POINT('',(142.23749946518,-77.97499946518,0.)); +#380246 = DIRECTION('',(-0.,-0.,1.)); +#380247 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#380248 = ADVANCED_FACE('',(#380249),#380274,.F.); +#380249 = FACE_BOUND('',#380250,.F.); +#380250 = EDGE_LOOP('',(#380251,#380252,#380260,#380268)); +#380251 = ORIENTED_EDGE('',*,*,#380229,.T.); +#380252 = ORIENTED_EDGE('',*,*,#380253,.T.); +#380253 = EDGE_CURVE('',#380221,#380254,#380256,.T.); +#380254 = VERTEX_POINT('',#380255); +#380255 = CARTESIAN_POINT('',(142.6875,-77.8875,-4.E-02)); +#380256 = LINE('',#380257,#380258); +#380257 = CARTESIAN_POINT('',(142.2375,-77.8875,-4.E-02)); +#380258 = VECTOR('',#380259,1.); +#380259 = DIRECTION('',(1.,0.,0.)); +#380260 = ORIENTED_EDGE('',*,*,#380261,.F.); +#380261 = EDGE_CURVE('',#380262,#380254,#380264,.T.); +#380262 = VERTEX_POINT('',#380263); +#380263 = CARTESIAN_POINT('',(142.6875,-77.8875,0.)); +#380264 = LINE('',#380265,#380266); +#380265 = CARTESIAN_POINT('',(142.6875,-77.8875,0.)); +#380266 = VECTOR('',#380267,1.); +#380267 = DIRECTION('',(0.,0.,-1.)); +#380268 = ORIENTED_EDGE('',*,*,#380269,.F.); +#380269 = EDGE_CURVE('',#380230,#380262,#380270,.T.); +#380270 = LINE('',#380271,#380272); +#380271 = CARTESIAN_POINT('',(142.2375,-77.8875,0.)); +#380272 = VECTOR('',#380273,1.); +#380273 = DIRECTION('',(1.,0.,0.)); +#380274 = PLANE('',#380275); +#380275 = AXIS2_PLACEMENT_3D('',#380276,#380277,#380278); +#380276 = CARTESIAN_POINT('',(142.2375,-77.8875,0.)); +#380277 = DIRECTION('',(0.,-1.,0.)); +#380278 = DIRECTION('',(1.,0.,0.)); +#380279 = ADVANCED_FACE('',(#380280),#380307,.T.); +#380280 = FACE_BOUND('',#380281,.F.); +#380281 = EDGE_LOOP('',(#380282,#380283,#380292,#380300)); +#380282 = ORIENTED_EDGE('',*,*,#380261,.T.); +#380283 = ORIENTED_EDGE('',*,*,#380284,.T.); +#380284 = EDGE_CURVE('',#380254,#380285,#380287,.T.); +#380285 = VERTEX_POINT('',#380286); +#380286 = CARTESIAN_POINT('',(142.775,-77.975,-4.E-02)); +#380287 = CIRCLE('',#380288,8.749946518209E-02); +#380288 = AXIS2_PLACEMENT_3D('',#380289,#380290,#380291); +#380289 = CARTESIAN_POINT('',(142.68750053482,-77.97499946518,-4.E-02)); +#380290 = DIRECTION('',(0.,0.,-1.)); +#380291 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#380292 = ORIENTED_EDGE('',*,*,#380293,.F.); +#380293 = EDGE_CURVE('',#380294,#380285,#380296,.T.); +#380294 = VERTEX_POINT('',#380295); +#380295 = CARTESIAN_POINT('',(142.775,-77.975,0.)); +#380296 = LINE('',#380297,#380298); +#380297 = CARTESIAN_POINT('',(142.775,-77.975,0.)); +#380298 = VECTOR('',#380299,1.); +#380299 = DIRECTION('',(0.,0.,-1.)); +#380300 = ORIENTED_EDGE('',*,*,#380301,.F.); +#380301 = EDGE_CURVE('',#380262,#380294,#380302,.T.); +#380302 = CIRCLE('',#380303,8.749946518209E-02); +#380303 = AXIS2_PLACEMENT_3D('',#380304,#380305,#380306); +#380304 = CARTESIAN_POINT('',(142.68750053482,-77.97499946518,0.)); +#380305 = DIRECTION('',(0.,0.,-1.)); +#380306 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#380307 = CYLINDRICAL_SURFACE('',#380308,8.749946518209E-02); +#380308 = AXIS2_PLACEMENT_3D('',#380309,#380310,#380311); +#380309 = CARTESIAN_POINT('',(142.68750053482,-77.97499946518,0.)); +#380310 = DIRECTION('',(-0.,-0.,1.)); +#380311 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#380312 = ADVANCED_FACE('',(#380313),#380338,.F.); +#380313 = FACE_BOUND('',#380314,.F.); +#380314 = EDGE_LOOP('',(#380315,#380316,#380324,#380332)); +#380315 = ORIENTED_EDGE('',*,*,#380293,.T.); +#380316 = ORIENTED_EDGE('',*,*,#380317,.T.); +#380317 = EDGE_CURVE('',#380285,#380318,#380320,.T.); +#380318 = VERTEX_POINT('',#380319); +#380319 = CARTESIAN_POINT('',(142.775,-78.15,-4.E-02)); +#380320 = LINE('',#380321,#380322); +#380321 = CARTESIAN_POINT('',(142.775,-77.975,-4.E-02)); +#380322 = VECTOR('',#380323,1.); +#380323 = DIRECTION('',(0.,-1.,0.)); +#380324 = ORIENTED_EDGE('',*,*,#380325,.F.); +#380325 = EDGE_CURVE('',#380326,#380318,#380328,.T.); +#380326 = VERTEX_POINT('',#380327); +#380327 = CARTESIAN_POINT('',(142.775,-78.15,0.)); +#380328 = LINE('',#380329,#380330); +#380329 = CARTESIAN_POINT('',(142.775,-78.15,0.)); +#380330 = VECTOR('',#380331,1.); +#380331 = DIRECTION('',(0.,0.,-1.)); +#380332 = ORIENTED_EDGE('',*,*,#380333,.F.); +#380333 = EDGE_CURVE('',#380294,#380326,#380334,.T.); +#380334 = LINE('',#380335,#380336); +#380335 = CARTESIAN_POINT('',(142.775,-77.975,0.)); +#380336 = VECTOR('',#380337,1.); +#380337 = DIRECTION('',(0.,-1.,0.)); +#380338 = PLANE('',#380339); +#380339 = AXIS2_PLACEMENT_3D('',#380340,#380341,#380342); +#380340 = CARTESIAN_POINT('',(142.775,-77.975,0.)); +#380341 = DIRECTION('',(-1.,-0.,-0.)); +#380342 = DIRECTION('',(0.,-1.,0.)); +#380343 = ADVANCED_FACE('',(#380344),#380371,.T.); +#380344 = FACE_BOUND('',#380345,.F.); +#380345 = EDGE_LOOP('',(#380346,#380347,#380356,#380364)); +#380346 = ORIENTED_EDGE('',*,*,#380325,.T.); +#380347 = ORIENTED_EDGE('',*,*,#380348,.T.); +#380348 = EDGE_CURVE('',#380318,#380349,#380351,.T.); +#380349 = VERTEX_POINT('',#380350); +#380350 = CARTESIAN_POINT('',(142.6875,-78.2375,-4.E-02)); +#380351 = CIRCLE('',#380352,8.749946518209E-02); +#380352 = AXIS2_PLACEMENT_3D('',#380353,#380354,#380355); +#380353 = CARTESIAN_POINT('',(142.68750053482,-78.15000053482,-4.E-02)); +#380354 = DIRECTION('',(0.,0.,-1.)); +#380355 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#380356 = ORIENTED_EDGE('',*,*,#380357,.F.); +#380357 = EDGE_CURVE('',#380358,#380349,#380360,.T.); +#380358 = VERTEX_POINT('',#380359); +#380359 = CARTESIAN_POINT('',(142.6875,-78.2375,0.)); +#380360 = LINE('',#380361,#380362); +#380361 = CARTESIAN_POINT('',(142.6875,-78.2375,0.)); +#380362 = VECTOR('',#380363,1.); +#380363 = DIRECTION('',(0.,0.,-1.)); +#380364 = ORIENTED_EDGE('',*,*,#380365,.F.); +#380365 = EDGE_CURVE('',#380326,#380358,#380366,.T.); +#380366 = CIRCLE('',#380367,8.749946518209E-02); +#380367 = AXIS2_PLACEMENT_3D('',#380368,#380369,#380370); +#380368 = CARTESIAN_POINT('',(142.68750053482,-78.15000053482,0.)); +#380369 = DIRECTION('',(0.,0.,-1.)); +#380370 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#380371 = CYLINDRICAL_SURFACE('',#380372,8.749946518209E-02); +#380372 = AXIS2_PLACEMENT_3D('',#380373,#380374,#380375); +#380373 = CARTESIAN_POINT('',(142.68750053482,-78.15000053482,0.)); +#380374 = DIRECTION('',(-0.,-0.,1.)); +#380375 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#380376 = ADVANCED_FACE('',(#380377),#380402,.F.); +#380377 = FACE_BOUND('',#380378,.F.); +#380378 = EDGE_LOOP('',(#380379,#380380,#380388,#380396)); +#380379 = ORIENTED_EDGE('',*,*,#380357,.T.); +#380380 = ORIENTED_EDGE('',*,*,#380381,.T.); +#380381 = EDGE_CURVE('',#380349,#380382,#380384,.T.); +#380382 = VERTEX_POINT('',#380383); +#380383 = CARTESIAN_POINT('',(142.2375,-78.2375,-4.E-02)); +#380384 = LINE('',#380385,#380386); +#380385 = CARTESIAN_POINT('',(142.6875,-78.2375,-4.E-02)); +#380386 = VECTOR('',#380387,1.); +#380387 = DIRECTION('',(-1.,0.,0.)); +#380388 = ORIENTED_EDGE('',*,*,#380389,.F.); +#380389 = EDGE_CURVE('',#380390,#380382,#380392,.T.); +#380390 = VERTEX_POINT('',#380391); +#380391 = CARTESIAN_POINT('',(142.2375,-78.2375,0.)); +#380392 = LINE('',#380393,#380394); +#380393 = CARTESIAN_POINT('',(142.2375,-78.2375,0.)); +#380394 = VECTOR('',#380395,1.); +#380395 = DIRECTION('',(0.,0.,-1.)); +#380396 = ORIENTED_EDGE('',*,*,#380397,.F.); +#380397 = EDGE_CURVE('',#380358,#380390,#380398,.T.); +#380398 = LINE('',#380399,#380400); +#380399 = CARTESIAN_POINT('',(142.6875,-78.2375,0.)); +#380400 = VECTOR('',#380401,1.); +#380401 = DIRECTION('',(-1.,0.,0.)); +#380402 = PLANE('',#380403); +#380403 = AXIS2_PLACEMENT_3D('',#380404,#380405,#380406); +#380404 = CARTESIAN_POINT('',(142.6875,-78.2375,0.)); +#380405 = DIRECTION('',(0.,1.,0.)); +#380406 = DIRECTION('',(-1.,0.,0.)); +#380407 = ADVANCED_FACE('',(#380408),#380435,.T.); +#380408 = FACE_BOUND('',#380409,.F.); +#380409 = EDGE_LOOP('',(#380410,#380411,#380420,#380428)); +#380410 = ORIENTED_EDGE('',*,*,#380389,.T.); +#380411 = ORIENTED_EDGE('',*,*,#380412,.T.); +#380412 = EDGE_CURVE('',#380382,#380413,#380415,.T.); +#380413 = VERTEX_POINT('',#380414); +#380414 = CARTESIAN_POINT('',(142.15,-78.15,-4.E-02)); +#380415 = CIRCLE('',#380416,8.749946518206E-02); +#380416 = AXIS2_PLACEMENT_3D('',#380417,#380418,#380419); +#380417 = CARTESIAN_POINT('',(142.23749946518,-78.15000053482,-4.E-02)); +#380418 = DIRECTION('',(0.,0.,-1.)); +#380419 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#380420 = ORIENTED_EDGE('',*,*,#380421,.F.); +#380421 = EDGE_CURVE('',#380422,#380413,#380424,.T.); +#380422 = VERTEX_POINT('',#380423); +#380423 = CARTESIAN_POINT('',(142.15,-78.15,0.)); +#380424 = LINE('',#380425,#380426); +#380425 = CARTESIAN_POINT('',(142.15,-78.15,0.)); +#380426 = VECTOR('',#380427,1.); +#380427 = DIRECTION('',(0.,0.,-1.)); +#380428 = ORIENTED_EDGE('',*,*,#380429,.F.); +#380429 = EDGE_CURVE('',#380390,#380422,#380430,.T.); +#380430 = CIRCLE('',#380431,8.749946518206E-02); +#380431 = AXIS2_PLACEMENT_3D('',#380432,#380433,#380434); +#380432 = CARTESIAN_POINT('',(142.23749946518,-78.15000053482,0.)); +#380433 = DIRECTION('',(0.,0.,-1.)); +#380434 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#380435 = CYLINDRICAL_SURFACE('',#380436,8.749946518206E-02); +#380436 = AXIS2_PLACEMENT_3D('',#380437,#380438,#380439); +#380437 = CARTESIAN_POINT('',(142.23749946518,-78.15000053482,0.)); +#380438 = DIRECTION('',(-0.,-0.,1.)); +#380439 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#380440 = ADVANCED_FACE('',(#380441),#380457,.F.); +#380441 = FACE_BOUND('',#380442,.F.); +#380442 = EDGE_LOOP('',(#380443,#380444,#380450,#380451)); +#380443 = ORIENTED_EDGE('',*,*,#380421,.T.); +#380444 = ORIENTED_EDGE('',*,*,#380445,.T.); +#380445 = EDGE_CURVE('',#380413,#380213,#380446,.T.); +#380446 = LINE('',#380447,#380448); +#380447 = CARTESIAN_POINT('',(142.15,-78.15,-4.E-02)); +#380448 = VECTOR('',#380449,1.); +#380449 = DIRECTION('',(0.,1.,0.)); +#380450 = ORIENTED_EDGE('',*,*,#380210,.F.); +#380451 = ORIENTED_EDGE('',*,*,#380452,.F.); +#380452 = EDGE_CURVE('',#380422,#380211,#380453,.T.); +#380453 = LINE('',#380454,#380455); +#380454 = CARTESIAN_POINT('',(142.15,-78.15,0.)); +#380455 = VECTOR('',#380456,1.); +#380456 = DIRECTION('',(0.,1.,0.)); +#380457 = PLANE('',#380458); +#380458 = AXIS2_PLACEMENT_3D('',#380459,#380460,#380461); +#380459 = CARTESIAN_POINT('',(142.15,-78.15,0.)); +#380460 = DIRECTION('',(1.,-0.,0.)); +#380461 = DIRECTION('',(0.,1.,0.)); +#380462 = ADVANCED_FACE('',(#380463),#380473,.F.); +#380463 = FACE_BOUND('',#380464,.F.); +#380464 = EDGE_LOOP('',(#380465,#380466,#380467,#380468,#380469,#380470, + #380471,#380472)); +#380465 = ORIENTED_EDGE('',*,*,#380237,.T.); +#380466 = ORIENTED_EDGE('',*,*,#380269,.T.); +#380467 = ORIENTED_EDGE('',*,*,#380301,.T.); +#380468 = ORIENTED_EDGE('',*,*,#380333,.T.); +#380469 = ORIENTED_EDGE('',*,*,#380365,.T.); +#380470 = ORIENTED_EDGE('',*,*,#380397,.T.); +#380471 = ORIENTED_EDGE('',*,*,#380429,.T.); +#380472 = ORIENTED_EDGE('',*,*,#380452,.T.); +#380473 = PLANE('',#380474); +#380474 = AXIS2_PLACEMENT_3D('',#380475,#380476,#380477); +#380475 = CARTESIAN_POINT('',(0.,0.,0.)); +#380476 = DIRECTION('',(-0.,-0.,-1.)); +#380477 = DIRECTION('',(-1.,0.,0.)); +#380478 = ADVANCED_FACE('',(#380479),#380489,.T.); +#380479 = FACE_BOUND('',#380480,.T.); +#380480 = EDGE_LOOP('',(#380481,#380482,#380483,#380484,#380485,#380486, + #380487,#380488)); +#380481 = ORIENTED_EDGE('',*,*,#380220,.T.); +#380482 = ORIENTED_EDGE('',*,*,#380253,.T.); +#380483 = ORIENTED_EDGE('',*,*,#380284,.T.); +#380484 = ORIENTED_EDGE('',*,*,#380317,.T.); +#380485 = ORIENTED_EDGE('',*,*,#380348,.T.); +#380486 = ORIENTED_EDGE('',*,*,#380381,.T.); +#380487 = ORIENTED_EDGE('',*,*,#380412,.T.); +#380488 = ORIENTED_EDGE('',*,*,#380445,.T.); +#380489 = PLANE('',#380490); +#380490 = AXIS2_PLACEMENT_3D('',#380491,#380492,#380493); +#380491 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#380492 = DIRECTION('',(-0.,-0.,-1.)); +#380493 = DIRECTION('',(-1.,0.,0.)); +#380494 = MANIFOLD_SOLID_BREP('',#380495); +#380495 = CLOSED_SHELL('',(#380496,#380529,#380549,#380569)); +#380496 = ADVANCED_FACE('',(#380497),#380524,.T.); +#380497 = FACE_BOUND('',#380498,.F.); +#380498 = EDGE_LOOP('',(#380499,#380509,#380516,#380517)); +#380499 = ORIENTED_EDGE('',*,*,#380500,.T.); +#380500 = EDGE_CURVE('',#380501,#380503,#380505,.T.); +#380501 = VERTEX_POINT('',#380502); +#380502 = CARTESIAN_POINT('',(124.7155,-127.5,1.51)); +#380503 = VERTEX_POINT('',#380504); +#380504 = CARTESIAN_POINT('',(124.7155,-127.5,1.55)); +#380505 = LINE('',#380506,#380507); +#380506 = CARTESIAN_POINT('',(124.7155,-127.5,1.51)); +#380507 = VECTOR('',#380508,1.); +#380508 = DIRECTION('',(0.,0.,1.)); +#380509 = ORIENTED_EDGE('',*,*,#380510,.T.); +#380510 = EDGE_CURVE('',#380503,#380503,#380511,.T.); +#380511 = CIRCLE('',#380512,0.7155); +#380512 = AXIS2_PLACEMENT_3D('',#380513,#380514,#380515); +#380513 = CARTESIAN_POINT('',(124.,-127.5,1.55)); +#380514 = DIRECTION('',(0.,0.,1.)); +#380515 = DIRECTION('',(1.,0.,-0.)); +#380516 = ORIENTED_EDGE('',*,*,#380500,.F.); +#380517 = ORIENTED_EDGE('',*,*,#380518,.F.); +#380518 = EDGE_CURVE('',#380501,#380501,#380519,.T.); +#380519 = CIRCLE('',#380520,0.7155); +#380520 = AXIS2_PLACEMENT_3D('',#380521,#380522,#380523); +#380521 = CARTESIAN_POINT('',(124.,-127.5,1.51)); +#380522 = DIRECTION('',(0.,0.,1.)); +#380523 = DIRECTION('',(1.,0.,-0.)); +#380524 = CYLINDRICAL_SURFACE('',#380525,0.7155); +#380525 = AXIS2_PLACEMENT_3D('',#380526,#380527,#380528); +#380526 = CARTESIAN_POINT('',(124.,-127.5,1.51)); +#380527 = DIRECTION('',(-0.,-0.,-1.)); +#380528 = DIRECTION('',(1.,0.,-0.)); +#380529 = ADVANCED_FACE('',(#380530,#380533),#380544,.F.); +#380530 = FACE_BOUND('',#380531,.F.); +#380531 = EDGE_LOOP('',(#380532)); +#380532 = ORIENTED_EDGE('',*,*,#380518,.T.); +#380533 = FACE_BOUND('',#380534,.F.); +#380534 = EDGE_LOOP('',(#380535)); +#380535 = ORIENTED_EDGE('',*,*,#380536,.T.); +#380536 = EDGE_CURVE('',#380537,#380537,#380539,.T.); +#380537 = VERTEX_POINT('',#380538); +#380538 = CARTESIAN_POINT('',(124.,-127.935,1.51)); +#380539 = CIRCLE('',#380540,0.435); +#380540 = AXIS2_PLACEMENT_3D('',#380541,#380542,#380543); +#380541 = CARTESIAN_POINT('',(124.,-127.5,1.51)); +#380542 = DIRECTION('',(-0.,0.,-1.)); +#380543 = DIRECTION('',(-0.,-1.,0.)); +#380544 = PLANE('',#380545); +#380545 = AXIS2_PLACEMENT_3D('',#380546,#380547,#380548); +#380546 = CARTESIAN_POINT('',(0.,0.,1.51)); +#380547 = DIRECTION('',(0.,0.,1.)); +#380548 = DIRECTION('',(1.,0.,-0.)); +#380549 = ADVANCED_FACE('',(#380550,#380553),#380564,.T.); +#380550 = FACE_BOUND('',#380551,.T.); +#380551 = EDGE_LOOP('',(#380552)); +#380552 = ORIENTED_EDGE('',*,*,#380510,.T.); +#380553 = FACE_BOUND('',#380554,.T.); +#380554 = EDGE_LOOP('',(#380555)); +#380555 = ORIENTED_EDGE('',*,*,#380556,.T.); +#380556 = EDGE_CURVE('',#380557,#380557,#380559,.T.); +#380557 = VERTEX_POINT('',#380558); +#380558 = CARTESIAN_POINT('',(124.,-127.935,1.55)); +#380559 = CIRCLE('',#380560,0.435); +#380560 = AXIS2_PLACEMENT_3D('',#380561,#380562,#380563); +#380561 = CARTESIAN_POINT('',(124.,-127.5,1.55)); +#380562 = DIRECTION('',(-0.,0.,-1.)); +#380563 = DIRECTION('',(-0.,-1.,0.)); +#380564 = PLANE('',#380565); +#380565 = AXIS2_PLACEMENT_3D('',#380566,#380567,#380568); +#380566 = CARTESIAN_POINT('',(0.,0.,1.55)); +#380567 = DIRECTION('',(0.,0.,1.)); +#380568 = DIRECTION('',(1.,0.,-0.)); +#380569 = ADVANCED_FACE('',(#380570),#380581,.F.); +#380570 = FACE_BOUND('',#380571,.T.); +#380571 = EDGE_LOOP('',(#380572,#380573,#380579,#380580)); +#380572 = ORIENTED_EDGE('',*,*,#380536,.T.); +#380573 = ORIENTED_EDGE('',*,*,#380574,.T.); +#380574 = EDGE_CURVE('',#380537,#380557,#380575,.T.); +#380575 = LINE('',#380576,#380577); +#380576 = CARTESIAN_POINT('',(124.,-127.935,-4.6E-02)); +#380577 = VECTOR('',#380578,1.); +#380578 = DIRECTION('',(0.,0.,1.)); +#380579 = ORIENTED_EDGE('',*,*,#380556,.F.); +#380580 = ORIENTED_EDGE('',*,*,#380574,.F.); +#380581 = CYLINDRICAL_SURFACE('',#380582,0.435); +#380582 = AXIS2_PLACEMENT_3D('',#380583,#380584,#380585); +#380583 = CARTESIAN_POINT('',(124.,-127.5,-4.6E-02)); +#380584 = DIRECTION('',(-0.,-0.,-1.)); +#380585 = DIRECTION('',(-0.,-1.,0.)); +#380586 = MANIFOLD_SOLID_BREP('',#380587); +#380587 = CLOSED_SHELL('',(#380588,#380621,#380641,#380661)); +#380588 = ADVANCED_FACE('',(#380589),#380616,.T.); +#380589 = FACE_BOUND('',#380590,.T.); +#380590 = EDGE_LOOP('',(#380591,#380601,#380608,#380609)); +#380591 = ORIENTED_EDGE('',*,*,#380592,.T.); +#380592 = EDGE_CURVE('',#380593,#380595,#380597,.T.); +#380593 = VERTEX_POINT('',#380594); +#380594 = CARTESIAN_POINT('',(124.7155,-127.5,0.)); +#380595 = VERTEX_POINT('',#380596); +#380596 = CARTESIAN_POINT('',(124.7155,-127.5,-4.E-02)); +#380597 = LINE('',#380598,#380599); +#380598 = CARTESIAN_POINT('',(124.7155,-127.5,0.)); +#380599 = VECTOR('',#380600,1.); +#380600 = DIRECTION('',(0.,0.,-1.)); +#380601 = ORIENTED_EDGE('',*,*,#380602,.T.); +#380602 = EDGE_CURVE('',#380595,#380595,#380603,.T.); +#380603 = CIRCLE('',#380604,0.7155); +#380604 = AXIS2_PLACEMENT_3D('',#380605,#380606,#380607); +#380605 = CARTESIAN_POINT('',(124.,-127.5,-4.E-02)); +#380606 = DIRECTION('',(0.,0.,1.)); +#380607 = DIRECTION('',(1.,0.,-0.)); +#380608 = ORIENTED_EDGE('',*,*,#380592,.F.); +#380609 = ORIENTED_EDGE('',*,*,#380610,.F.); +#380610 = EDGE_CURVE('',#380593,#380593,#380611,.T.); +#380611 = CIRCLE('',#380612,0.7155); +#380612 = AXIS2_PLACEMENT_3D('',#380613,#380614,#380615); +#380613 = CARTESIAN_POINT('',(124.,-127.5,0.)); +#380614 = DIRECTION('',(0.,0.,1.)); +#380615 = DIRECTION('',(1.,0.,-0.)); +#380616 = CYLINDRICAL_SURFACE('',#380617,0.7155); +#380617 = AXIS2_PLACEMENT_3D('',#380618,#380619,#380620); +#380618 = CARTESIAN_POINT('',(124.,-127.5,0.)); +#380619 = DIRECTION('',(0.,0.,1.)); +#380620 = DIRECTION('',(1.,0.,-0.)); +#380621 = ADVANCED_FACE('',(#380622,#380625),#380636,.F.); +#380622 = FACE_BOUND('',#380623,.F.); +#380623 = EDGE_LOOP('',(#380624)); +#380624 = ORIENTED_EDGE('',*,*,#380610,.F.); +#380625 = FACE_BOUND('',#380626,.F.); +#380626 = EDGE_LOOP('',(#380627)); +#380627 = ORIENTED_EDGE('',*,*,#380628,.F.); +#380628 = EDGE_CURVE('',#380629,#380629,#380631,.T.); +#380629 = VERTEX_POINT('',#380630); +#380630 = CARTESIAN_POINT('',(124.,-127.935,0.)); +#380631 = CIRCLE('',#380632,0.435); +#380632 = AXIS2_PLACEMENT_3D('',#380633,#380634,#380635); +#380633 = CARTESIAN_POINT('',(124.,-127.5,0.)); +#380634 = DIRECTION('',(-0.,0.,-1.)); +#380635 = DIRECTION('',(-0.,-1.,0.)); +#380636 = PLANE('',#380637); +#380637 = AXIS2_PLACEMENT_3D('',#380638,#380639,#380640); +#380638 = CARTESIAN_POINT('',(0.,0.,0.)); +#380639 = DIRECTION('',(-0.,-0.,-1.)); +#380640 = DIRECTION('',(-1.,0.,0.)); +#380641 = ADVANCED_FACE('',(#380642,#380645),#380656,.T.); +#380642 = FACE_BOUND('',#380643,.T.); +#380643 = EDGE_LOOP('',(#380644)); +#380644 = ORIENTED_EDGE('',*,*,#380602,.F.); +#380645 = FACE_BOUND('',#380646,.T.); +#380646 = EDGE_LOOP('',(#380647)); +#380647 = ORIENTED_EDGE('',*,*,#380648,.F.); +#380648 = EDGE_CURVE('',#380649,#380649,#380651,.T.); +#380649 = VERTEX_POINT('',#380650); +#380650 = CARTESIAN_POINT('',(124.,-127.935,-4.E-02)); +#380651 = CIRCLE('',#380652,0.435); +#380652 = AXIS2_PLACEMENT_3D('',#380653,#380654,#380655); +#380653 = CARTESIAN_POINT('',(124.,-127.5,-4.E-02)); +#380654 = DIRECTION('',(-0.,0.,-1.)); +#380655 = DIRECTION('',(-0.,-1.,0.)); +#380656 = PLANE('',#380657); +#380657 = AXIS2_PLACEMENT_3D('',#380658,#380659,#380660); +#380658 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#380659 = DIRECTION('',(-0.,-0.,-1.)); +#380660 = DIRECTION('',(-1.,0.,0.)); +#380661 = ADVANCED_FACE('',(#380662),#380673,.F.); +#380662 = FACE_BOUND('',#380663,.T.); +#380663 = EDGE_LOOP('',(#380664,#380665,#380671,#380672)); +#380664 = ORIENTED_EDGE('',*,*,#380648,.T.); +#380665 = ORIENTED_EDGE('',*,*,#380666,.T.); +#380666 = EDGE_CURVE('',#380649,#380629,#380667,.T.); +#380667 = LINE('',#380668,#380669); +#380668 = CARTESIAN_POINT('',(124.,-127.935,-4.6E-02)); +#380669 = VECTOR('',#380670,1.); +#380670 = DIRECTION('',(0.,0.,1.)); +#380671 = ORIENTED_EDGE('',*,*,#380628,.F.); +#380672 = ORIENTED_EDGE('',*,*,#380666,.F.); +#380673 = CYLINDRICAL_SURFACE('',#380674,0.435); +#380674 = AXIS2_PLACEMENT_3D('',#380675,#380676,#380677); +#380675 = CARTESIAN_POINT('',(124.,-127.5,-4.6E-02)); +#380676 = DIRECTION('',(-0.,-0.,-1.)); +#380677 = DIRECTION('',(-0.,-1.,0.)); +#380678 = MANIFOLD_SOLID_BREP('',#380679); +#380679 = CLOSED_SHELL('',(#380680,#380713,#380733,#380753)); +#380680 = ADVANCED_FACE('',(#380681),#380708,.T.); +#380681 = FACE_BOUND('',#380682,.F.); +#380682 = EDGE_LOOP('',(#380683,#380693,#380700,#380701)); +#380683 = ORIENTED_EDGE('',*,*,#380684,.T.); +#380684 = EDGE_CURVE('',#380685,#380687,#380689,.T.); +#380685 = VERTEX_POINT('',#380686); +#380686 = CARTESIAN_POINT('',(124.,-127.96,-4.E-02)); +#380687 = VERTEX_POINT('',#380688); +#380688 = CARTESIAN_POINT('',(124.,-127.96,1.55)); +#380689 = LINE('',#380690,#380691); +#380690 = CARTESIAN_POINT('',(124.,-127.96,-4.E-02)); +#380691 = VECTOR('',#380692,1.); +#380692 = DIRECTION('',(0.,0.,1.)); +#380693 = ORIENTED_EDGE('',*,*,#380694,.T.); +#380694 = EDGE_CURVE('',#380687,#380687,#380695,.T.); +#380695 = CIRCLE('',#380696,0.46); +#380696 = AXIS2_PLACEMENT_3D('',#380697,#380698,#380699); +#380697 = CARTESIAN_POINT('',(124.,-127.5,1.55)); +#380698 = DIRECTION('',(0.,0.,1.)); +#380699 = DIRECTION('',(-0.,-1.,0.)); +#380700 = ORIENTED_EDGE('',*,*,#380684,.F.); +#380701 = ORIENTED_EDGE('',*,*,#380702,.F.); +#380702 = EDGE_CURVE('',#380685,#380685,#380703,.T.); +#380703 = CIRCLE('',#380704,0.46); +#380704 = AXIS2_PLACEMENT_3D('',#380705,#380706,#380707); +#380705 = CARTESIAN_POINT('',(124.,-127.5,-4.E-02)); +#380706 = DIRECTION('',(0.,0.,1.)); +#380707 = DIRECTION('',(-0.,-1.,0.)); +#380708 = CYLINDRICAL_SURFACE('',#380709,0.46); +#380709 = AXIS2_PLACEMENT_3D('',#380710,#380711,#380712); +#380710 = CARTESIAN_POINT('',(124.,-127.5,-4.E-02)); +#380711 = DIRECTION('',(-0.,-0.,-1.)); +#380712 = DIRECTION('',(-0.,-1.,0.)); +#380713 = ADVANCED_FACE('',(#380714,#380717),#380728,.F.); +#380714 = FACE_BOUND('',#380715,.F.); +#380715 = EDGE_LOOP('',(#380716)); +#380716 = ORIENTED_EDGE('',*,*,#380702,.T.); +#380717 = FACE_BOUND('',#380718,.F.); +#380718 = EDGE_LOOP('',(#380719)); +#380719 = ORIENTED_EDGE('',*,*,#380720,.T.); +#380720 = EDGE_CURVE('',#380721,#380721,#380723,.T.); +#380721 = VERTEX_POINT('',#380722); +#380722 = CARTESIAN_POINT('',(124.,-127.935,-4.E-02)); +#380723 = CIRCLE('',#380724,0.435); +#380724 = AXIS2_PLACEMENT_3D('',#380725,#380726,#380727); +#380725 = CARTESIAN_POINT('',(124.,-127.5,-4.E-02)); +#380726 = DIRECTION('',(-0.,0.,-1.)); +#380727 = DIRECTION('',(-0.,-1.,0.)); +#380728 = PLANE('',#380729); +#380729 = AXIS2_PLACEMENT_3D('',#380730,#380731,#380732); +#380730 = CARTESIAN_POINT('',(124.,-127.96,-4.E-02)); +#380731 = DIRECTION('',(0.,0.,1.)); +#380732 = DIRECTION('',(1.,0.,-0.)); +#380733 = ADVANCED_FACE('',(#380734,#380737),#380748,.T.); +#380734 = FACE_BOUND('',#380735,.T.); +#380735 = EDGE_LOOP('',(#380736)); +#380736 = ORIENTED_EDGE('',*,*,#380694,.T.); +#380737 = FACE_BOUND('',#380738,.T.); +#380738 = EDGE_LOOP('',(#380739)); +#380739 = ORIENTED_EDGE('',*,*,#380740,.T.); +#380740 = EDGE_CURVE('',#380741,#380741,#380743,.T.); +#380741 = VERTEX_POINT('',#380742); +#380742 = CARTESIAN_POINT('',(124.,-127.935,1.55)); +#380743 = CIRCLE('',#380744,0.435); +#380744 = AXIS2_PLACEMENT_3D('',#380745,#380746,#380747); +#380745 = CARTESIAN_POINT('',(124.,-127.5,1.55)); +#380746 = DIRECTION('',(-0.,0.,-1.)); +#380747 = DIRECTION('',(-0.,-1.,0.)); +#380748 = PLANE('',#380749); +#380749 = AXIS2_PLACEMENT_3D('',#380750,#380751,#380752); +#380750 = CARTESIAN_POINT('',(124.,-127.96,1.55)); +#380751 = DIRECTION('',(0.,0.,1.)); +#380752 = DIRECTION('',(1.,0.,-0.)); +#380753 = ADVANCED_FACE('',(#380754),#380765,.F.); +#380754 = FACE_BOUND('',#380755,.T.); +#380755 = EDGE_LOOP('',(#380756,#380757,#380763,#380764)); +#380756 = ORIENTED_EDGE('',*,*,#380720,.T.); +#380757 = ORIENTED_EDGE('',*,*,#380758,.T.); +#380758 = EDGE_CURVE('',#380721,#380741,#380759,.T.); +#380759 = LINE('',#380760,#380761); +#380760 = CARTESIAN_POINT('',(124.,-127.935,-4.6E-02)); +#380761 = VECTOR('',#380762,1.); +#380762 = DIRECTION('',(0.,0.,1.)); +#380763 = ORIENTED_EDGE('',*,*,#380740,.F.); +#380764 = ORIENTED_EDGE('',*,*,#380758,.F.); +#380765 = CYLINDRICAL_SURFACE('',#380766,0.435); +#380766 = AXIS2_PLACEMENT_3D('',#380767,#380768,#380769); +#380767 = CARTESIAN_POINT('',(124.,-127.5,-4.6E-02)); +#380768 = DIRECTION('',(-0.,-0.,-1.)); +#380769 = DIRECTION('',(-0.,-1.,0.)); +#380770 = MANIFOLD_SOLID_BREP('',#380771); +#380771 = CLOSED_SHELL('',(#380772,#380814,#380845,#380878,#380909, + #380942,#380973,#381006,#381028,#381044)); +#380772 = ADVANCED_FACE('',(#380773),#380809,.T.); +#380773 = FACE_BOUND('',#380774,.T.); +#380774 = EDGE_LOOP('',(#380775,#380785,#380794,#380802)); +#380775 = ORIENTED_EDGE('',*,*,#380776,.T.); +#380776 = EDGE_CURVE('',#380777,#380779,#380781,.T.); +#380777 = VERTEX_POINT('',#380778); +#380778 = CARTESIAN_POINT('',(139.5,-112.,1.51)); +#380779 = VERTEX_POINT('',#380780); +#380780 = CARTESIAN_POINT('',(139.5,-112.,1.55)); +#380781 = LINE('',#380782,#380783); +#380782 = CARTESIAN_POINT('',(139.5,-112.,1.51)); +#380783 = VECTOR('',#380784,1.); +#380784 = DIRECTION('',(0.,0.,1.)); +#380785 = ORIENTED_EDGE('',*,*,#380786,.T.); +#380786 = EDGE_CURVE('',#380779,#380787,#380789,.T.); +#380787 = VERTEX_POINT('',#380788); +#380788 = CARTESIAN_POINT('',(140.,-111.5,1.55)); +#380789 = CIRCLE('',#380790,0.500001333575); +#380790 = AXIS2_PLACEMENT_3D('',#380791,#380792,#380793); +#380791 = CARTESIAN_POINT('',(140.00000133357,-112.0000013335,1.55)); +#380792 = DIRECTION('',(0.,0.,-1.)); +#380793 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#380794 = ORIENTED_EDGE('',*,*,#380795,.F.); +#380795 = EDGE_CURVE('',#380796,#380787,#380798,.T.); +#380796 = VERTEX_POINT('',#380797); +#380797 = CARTESIAN_POINT('',(140.,-111.5,1.51)); +#380798 = LINE('',#380799,#380800); +#380799 = CARTESIAN_POINT('',(140.,-111.5,1.51)); +#380800 = VECTOR('',#380801,1.); +#380801 = DIRECTION('',(0.,0.,1.)); +#380802 = ORIENTED_EDGE('',*,*,#380803,.F.); +#380803 = EDGE_CURVE('',#380777,#380796,#380804,.T.); +#380804 = CIRCLE('',#380805,0.500001333575); +#380805 = AXIS2_PLACEMENT_3D('',#380806,#380807,#380808); +#380806 = CARTESIAN_POINT('',(140.00000133357,-112.0000013335,1.51)); +#380807 = DIRECTION('',(0.,0.,-1.)); +#380808 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#380809 = CYLINDRICAL_SURFACE('',#380810,0.500001333575); +#380810 = AXIS2_PLACEMENT_3D('',#380811,#380812,#380813); +#380811 = CARTESIAN_POINT('',(140.00000133357,-112.0000013335,1.51)); +#380812 = DIRECTION('',(0.,0.,-1.)); +#380813 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#380814 = ADVANCED_FACE('',(#380815),#380840,.T.); +#380815 = FACE_BOUND('',#380816,.T.); +#380816 = EDGE_LOOP('',(#380817,#380818,#380826,#380834)); +#380817 = ORIENTED_EDGE('',*,*,#380795,.T.); +#380818 = ORIENTED_EDGE('',*,*,#380819,.T.); +#380819 = EDGE_CURVE('',#380787,#380820,#380822,.T.); +#380820 = VERTEX_POINT('',#380821); +#380821 = CARTESIAN_POINT('',(141.,-111.5,1.55)); +#380822 = LINE('',#380823,#380824); +#380823 = CARTESIAN_POINT('',(140.,-111.5,1.55)); +#380824 = VECTOR('',#380825,1.); +#380825 = DIRECTION('',(1.,0.,0.)); +#380826 = ORIENTED_EDGE('',*,*,#380827,.F.); +#380827 = EDGE_CURVE('',#380828,#380820,#380830,.T.); +#380828 = VERTEX_POINT('',#380829); +#380829 = CARTESIAN_POINT('',(141.,-111.5,1.51)); +#380830 = LINE('',#380831,#380832); +#380831 = CARTESIAN_POINT('',(141.,-111.5,1.51)); +#380832 = VECTOR('',#380833,1.); +#380833 = DIRECTION('',(0.,0.,1.)); +#380834 = ORIENTED_EDGE('',*,*,#380835,.F.); +#380835 = EDGE_CURVE('',#380796,#380828,#380836,.T.); +#380836 = LINE('',#380837,#380838); +#380837 = CARTESIAN_POINT('',(140.,-111.5,1.51)); +#380838 = VECTOR('',#380839,1.); +#380839 = DIRECTION('',(1.,0.,0.)); +#380840 = PLANE('',#380841); +#380841 = AXIS2_PLACEMENT_3D('',#380842,#380843,#380844); +#380842 = CARTESIAN_POINT('',(140.,-111.5,1.51)); +#380843 = DIRECTION('',(0.,1.,0.)); +#380844 = DIRECTION('',(1.,0.,0.)); +#380845 = ADVANCED_FACE('',(#380846),#380873,.T.); +#380846 = FACE_BOUND('',#380847,.T.); +#380847 = EDGE_LOOP('',(#380848,#380849,#380858,#380866)); +#380848 = ORIENTED_EDGE('',*,*,#380827,.T.); +#380849 = ORIENTED_EDGE('',*,*,#380850,.T.); +#380850 = EDGE_CURVE('',#380820,#380851,#380853,.T.); +#380851 = VERTEX_POINT('',#380852); +#380852 = CARTESIAN_POINT('',(141.5,-112.,1.55)); +#380853 = CIRCLE('',#380854,0.500001333575); +#380854 = AXIS2_PLACEMENT_3D('',#380855,#380856,#380857); +#380855 = CARTESIAN_POINT('',(140.99999866642,-112.0000013335,1.55)); +#380856 = DIRECTION('',(0.,0.,-1.)); +#380857 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#380858 = ORIENTED_EDGE('',*,*,#380859,.F.); +#380859 = EDGE_CURVE('',#380860,#380851,#380862,.T.); +#380860 = VERTEX_POINT('',#380861); +#380861 = CARTESIAN_POINT('',(141.5,-112.,1.51)); +#380862 = LINE('',#380863,#380864); +#380863 = CARTESIAN_POINT('',(141.5,-112.,1.51)); +#380864 = VECTOR('',#380865,1.); +#380865 = DIRECTION('',(0.,0.,1.)); +#380866 = ORIENTED_EDGE('',*,*,#380867,.F.); +#380867 = EDGE_CURVE('',#380828,#380860,#380868,.T.); +#380868 = CIRCLE('',#380869,0.500001333575); +#380869 = AXIS2_PLACEMENT_3D('',#380870,#380871,#380872); +#380870 = CARTESIAN_POINT('',(140.99999866642,-112.0000013335,1.51)); +#380871 = DIRECTION('',(0.,0.,-1.)); +#380872 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#380873 = CYLINDRICAL_SURFACE('',#380874,0.500001333575); +#380874 = AXIS2_PLACEMENT_3D('',#380875,#380876,#380877); +#380875 = CARTESIAN_POINT('',(140.99999866642,-112.0000013335,1.51)); +#380876 = DIRECTION('',(0.,0.,-1.)); +#380877 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#380878 = ADVANCED_FACE('',(#380879),#380904,.T.); +#380879 = FACE_BOUND('',#380880,.T.); +#380880 = EDGE_LOOP('',(#380881,#380882,#380890,#380898)); +#380881 = ORIENTED_EDGE('',*,*,#380859,.T.); +#380882 = ORIENTED_EDGE('',*,*,#380883,.T.); +#380883 = EDGE_CURVE('',#380851,#380884,#380886,.T.); +#380884 = VERTEX_POINT('',#380885); +#380885 = CARTESIAN_POINT('',(141.5,-113.,1.55)); +#380886 = LINE('',#380887,#380888); +#380887 = CARTESIAN_POINT('',(141.5,-112.,1.55)); +#380888 = VECTOR('',#380889,1.); +#380889 = DIRECTION('',(0.,-1.,0.)); +#380890 = ORIENTED_EDGE('',*,*,#380891,.F.); +#380891 = EDGE_CURVE('',#380892,#380884,#380894,.T.); +#380892 = VERTEX_POINT('',#380893); +#380893 = CARTESIAN_POINT('',(141.5,-113.,1.51)); +#380894 = LINE('',#380895,#380896); +#380895 = CARTESIAN_POINT('',(141.5,-113.,1.51)); +#380896 = VECTOR('',#380897,1.); +#380897 = DIRECTION('',(0.,0.,1.)); +#380898 = ORIENTED_EDGE('',*,*,#380899,.F.); +#380899 = EDGE_CURVE('',#380860,#380892,#380900,.T.); +#380900 = LINE('',#380901,#380902); +#380901 = CARTESIAN_POINT('',(141.5,-112.,1.51)); +#380902 = VECTOR('',#380903,1.); +#380903 = DIRECTION('',(0.,-1.,0.)); +#380904 = PLANE('',#380905); +#380905 = AXIS2_PLACEMENT_3D('',#380906,#380907,#380908); +#380906 = CARTESIAN_POINT('',(141.5,-112.,1.51)); +#380907 = DIRECTION('',(1.,0.,-0.)); +#380908 = DIRECTION('',(0.,-1.,0.)); +#380909 = ADVANCED_FACE('',(#380910),#380937,.T.); +#380910 = FACE_BOUND('',#380911,.T.); +#380911 = EDGE_LOOP('',(#380912,#380913,#380922,#380930)); +#380912 = ORIENTED_EDGE('',*,*,#380891,.T.); +#380913 = ORIENTED_EDGE('',*,*,#380914,.T.); +#380914 = EDGE_CURVE('',#380884,#380915,#380917,.T.); +#380915 = VERTEX_POINT('',#380916); +#380916 = CARTESIAN_POINT('',(141.,-113.5,1.55)); +#380917 = CIRCLE('',#380918,0.500001333575); +#380918 = AXIS2_PLACEMENT_3D('',#380919,#380920,#380921); +#380919 = CARTESIAN_POINT('',(140.99999866642,-112.9999986664,1.55)); +#380920 = DIRECTION('',(0.,0.,-1.)); +#380921 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#380922 = ORIENTED_EDGE('',*,*,#380923,.F.); +#380923 = EDGE_CURVE('',#380924,#380915,#380926,.T.); +#380924 = VERTEX_POINT('',#380925); +#380925 = CARTESIAN_POINT('',(141.,-113.5,1.51)); +#380926 = LINE('',#380927,#380928); +#380927 = CARTESIAN_POINT('',(141.,-113.5,1.51)); +#380928 = VECTOR('',#380929,1.); +#380929 = DIRECTION('',(0.,0.,1.)); +#380930 = ORIENTED_EDGE('',*,*,#380931,.F.); +#380931 = EDGE_CURVE('',#380892,#380924,#380932,.T.); +#380932 = CIRCLE('',#380933,0.500001333575); +#380933 = AXIS2_PLACEMENT_3D('',#380934,#380935,#380936); +#380934 = CARTESIAN_POINT('',(140.99999866642,-112.9999986664,1.51)); +#380935 = DIRECTION('',(0.,0.,-1.)); +#380936 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#380937 = CYLINDRICAL_SURFACE('',#380938,0.500001333575); +#380938 = AXIS2_PLACEMENT_3D('',#380939,#380940,#380941); +#380939 = CARTESIAN_POINT('',(140.99999866642,-112.9999986664,1.51)); +#380940 = DIRECTION('',(0.,0.,-1.)); +#380941 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#380942 = ADVANCED_FACE('',(#380943),#380968,.T.); +#380943 = FACE_BOUND('',#380944,.T.); +#380944 = EDGE_LOOP('',(#380945,#380946,#380954,#380962)); +#380945 = ORIENTED_EDGE('',*,*,#380923,.T.); +#380946 = ORIENTED_EDGE('',*,*,#380947,.T.); +#380947 = EDGE_CURVE('',#380915,#380948,#380950,.T.); +#380948 = VERTEX_POINT('',#380949); +#380949 = CARTESIAN_POINT('',(140.,-113.5,1.55)); +#380950 = LINE('',#380951,#380952); +#380951 = CARTESIAN_POINT('',(141.,-113.5,1.55)); +#380952 = VECTOR('',#380953,1.); +#380953 = DIRECTION('',(-1.,0.,0.)); +#380954 = ORIENTED_EDGE('',*,*,#380955,.F.); +#380955 = EDGE_CURVE('',#380956,#380948,#380958,.T.); +#380956 = VERTEX_POINT('',#380957); +#380957 = CARTESIAN_POINT('',(140.,-113.5,1.51)); +#380958 = LINE('',#380959,#380960); +#380959 = CARTESIAN_POINT('',(140.,-113.5,1.51)); +#380960 = VECTOR('',#380961,1.); +#380961 = DIRECTION('',(0.,0.,1.)); +#380962 = ORIENTED_EDGE('',*,*,#380963,.F.); +#380963 = EDGE_CURVE('',#380924,#380956,#380964,.T.); +#380964 = LINE('',#380965,#380966); +#380965 = CARTESIAN_POINT('',(141.,-113.5,1.51)); +#380966 = VECTOR('',#380967,1.); +#380967 = DIRECTION('',(-1.,0.,0.)); +#380968 = PLANE('',#380969); +#380969 = AXIS2_PLACEMENT_3D('',#380970,#380971,#380972); +#380970 = CARTESIAN_POINT('',(141.,-113.5,1.51)); +#380971 = DIRECTION('',(0.,-1.,0.)); +#380972 = DIRECTION('',(-1.,0.,0.)); +#380973 = ADVANCED_FACE('',(#380974),#381001,.T.); +#380974 = FACE_BOUND('',#380975,.T.); +#380975 = EDGE_LOOP('',(#380976,#380977,#380986,#380994)); +#380976 = ORIENTED_EDGE('',*,*,#380955,.T.); +#380977 = ORIENTED_EDGE('',*,*,#380978,.T.); +#380978 = EDGE_CURVE('',#380948,#380979,#380981,.T.); +#380979 = VERTEX_POINT('',#380980); +#380980 = CARTESIAN_POINT('',(139.5,-113.,1.55)); +#380981 = CIRCLE('',#380982,0.500001333575); +#380982 = AXIS2_PLACEMENT_3D('',#380983,#380984,#380985); +#380983 = CARTESIAN_POINT('',(140.00000133357,-112.9999986664,1.55)); +#380984 = DIRECTION('',(0.,0.,-1.)); +#380985 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#380986 = ORIENTED_EDGE('',*,*,#380987,.F.); +#380987 = EDGE_CURVE('',#380988,#380979,#380990,.T.); +#380988 = VERTEX_POINT('',#380989); +#380989 = CARTESIAN_POINT('',(139.5,-113.,1.51)); +#380990 = LINE('',#380991,#380992); +#380991 = CARTESIAN_POINT('',(139.5,-113.,1.51)); +#380992 = VECTOR('',#380993,1.); +#380993 = DIRECTION('',(0.,0.,1.)); +#380994 = ORIENTED_EDGE('',*,*,#380995,.F.); +#380995 = EDGE_CURVE('',#380956,#380988,#380996,.T.); +#380996 = CIRCLE('',#380997,0.500001333575); +#380997 = AXIS2_PLACEMENT_3D('',#380998,#380999,#381000); +#380998 = CARTESIAN_POINT('',(140.00000133357,-112.9999986664,1.51)); +#380999 = DIRECTION('',(0.,0.,-1.)); +#381000 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#381001 = CYLINDRICAL_SURFACE('',#381002,0.500001333575); +#381002 = AXIS2_PLACEMENT_3D('',#381003,#381004,#381005); +#381003 = CARTESIAN_POINT('',(140.00000133357,-112.9999986664,1.51)); +#381004 = DIRECTION('',(0.,0.,-1.)); +#381005 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#381006 = ADVANCED_FACE('',(#381007),#381023,.T.); +#381007 = FACE_BOUND('',#381008,.T.); +#381008 = EDGE_LOOP('',(#381009,#381010,#381016,#381017)); +#381009 = ORIENTED_EDGE('',*,*,#380987,.T.); +#381010 = ORIENTED_EDGE('',*,*,#381011,.T.); +#381011 = EDGE_CURVE('',#380979,#380779,#381012,.T.); +#381012 = LINE('',#381013,#381014); +#381013 = CARTESIAN_POINT('',(139.5,-113.,1.55)); +#381014 = VECTOR('',#381015,1.); +#381015 = DIRECTION('',(0.,1.,0.)); +#381016 = ORIENTED_EDGE('',*,*,#380776,.F.); +#381017 = ORIENTED_EDGE('',*,*,#381018,.F.); +#381018 = EDGE_CURVE('',#380988,#380777,#381019,.T.); +#381019 = LINE('',#381020,#381021); +#381020 = CARTESIAN_POINT('',(139.5,-113.,1.51)); +#381021 = VECTOR('',#381022,1.); +#381022 = DIRECTION('',(0.,1.,0.)); +#381023 = PLANE('',#381024); +#381024 = AXIS2_PLACEMENT_3D('',#381025,#381026,#381027); +#381025 = CARTESIAN_POINT('',(139.5,-113.,1.51)); +#381026 = DIRECTION('',(-1.,0.,0.)); +#381027 = DIRECTION('',(0.,1.,0.)); +#381028 = ADVANCED_FACE('',(#381029),#381039,.F.); +#381029 = FACE_BOUND('',#381030,.T.); +#381030 = EDGE_LOOP('',(#381031,#381032,#381033,#381034,#381035,#381036, + #381037,#381038)); +#381031 = ORIENTED_EDGE('',*,*,#380803,.T.); +#381032 = ORIENTED_EDGE('',*,*,#380835,.T.); +#381033 = ORIENTED_EDGE('',*,*,#380867,.T.); +#381034 = ORIENTED_EDGE('',*,*,#380899,.T.); +#381035 = ORIENTED_EDGE('',*,*,#380931,.T.); +#381036 = ORIENTED_EDGE('',*,*,#380963,.T.); +#381037 = ORIENTED_EDGE('',*,*,#380995,.T.); +#381038 = ORIENTED_EDGE('',*,*,#381018,.T.); +#381039 = PLANE('',#381040); +#381040 = AXIS2_PLACEMENT_3D('',#381041,#381042,#381043); +#381041 = CARTESIAN_POINT('',(0.,0.,1.51)); +#381042 = DIRECTION('',(0.,0.,1.)); +#381043 = DIRECTION('',(1.,0.,-0.)); +#381044 = ADVANCED_FACE('',(#381045),#381055,.T.); +#381045 = FACE_BOUND('',#381046,.F.); +#381046 = EDGE_LOOP('',(#381047,#381048,#381049,#381050,#381051,#381052, + #381053,#381054)); +#381047 = ORIENTED_EDGE('',*,*,#380786,.T.); +#381048 = ORIENTED_EDGE('',*,*,#380819,.T.); +#381049 = ORIENTED_EDGE('',*,*,#380850,.T.); +#381050 = ORIENTED_EDGE('',*,*,#380883,.T.); +#381051 = ORIENTED_EDGE('',*,*,#380914,.T.); +#381052 = ORIENTED_EDGE('',*,*,#380947,.T.); +#381053 = ORIENTED_EDGE('',*,*,#380978,.T.); +#381054 = ORIENTED_EDGE('',*,*,#381011,.T.); +#381055 = PLANE('',#381056); +#381056 = AXIS2_PLACEMENT_3D('',#381057,#381058,#381059); +#381057 = CARTESIAN_POINT('',(0.,0.,1.55)); +#381058 = DIRECTION('',(0.,0.,1.)); +#381059 = DIRECTION('',(1.,0.,-0.)); +#381060 = MANIFOLD_SOLID_BREP('',#381061); +#381061 = CLOSED_SHELL('',(#381062,#381104,#381135,#381168,#381199, + #381232,#381263,#381296,#381318,#381334)); +#381062 = ADVANCED_FACE('',(#381063),#381099,.T.); +#381063 = FACE_BOUND('',#381064,.T.); +#381064 = EDGE_LOOP('',(#381065,#381075,#381084,#381092)); +#381065 = ORIENTED_EDGE('',*,*,#381066,.T.); +#381066 = EDGE_CURVE('',#381067,#381069,#381071,.T.); +#381067 = VERTEX_POINT('',#381068); +#381068 = CARTESIAN_POINT('',(151.05,-61.9,1.51)); +#381069 = VERTEX_POINT('',#381070); +#381070 = CARTESIAN_POINT('',(151.05,-61.9,1.55)); +#381071 = LINE('',#381072,#381073); +#381072 = CARTESIAN_POINT('',(151.05,-61.9,1.51)); +#381073 = VECTOR('',#381074,1.); +#381074 = DIRECTION('',(0.,0.,1.)); +#381075 = ORIENTED_EDGE('',*,*,#381076,.T.); +#381076 = EDGE_CURVE('',#381069,#381077,#381079,.T.); +#381077 = VERTEX_POINT('',#381078); +#381078 = CARTESIAN_POINT('',(151.2,-61.75,1.55)); +#381079 = CIRCLE('',#381080,0.150000058649); +#381080 = AXIS2_PLACEMENT_3D('',#381081,#381082,#381083); +#381081 = CARTESIAN_POINT('',(151.20000005864,-61.90000005864,1.55)); +#381082 = DIRECTION('',(0.,0.,-1.)); +#381083 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#381084 = ORIENTED_EDGE('',*,*,#381085,.F.); +#381085 = EDGE_CURVE('',#381086,#381077,#381088,.T.); +#381086 = VERTEX_POINT('',#381087); +#381087 = CARTESIAN_POINT('',(151.2,-61.75,1.51)); +#381088 = LINE('',#381089,#381090); +#381089 = CARTESIAN_POINT('',(151.2,-61.75,1.51)); +#381090 = VECTOR('',#381091,1.); +#381091 = DIRECTION('',(0.,0.,1.)); +#381092 = ORIENTED_EDGE('',*,*,#381093,.F.); +#381093 = EDGE_CURVE('',#381067,#381086,#381094,.T.); +#381094 = CIRCLE('',#381095,0.150000058649); +#381095 = AXIS2_PLACEMENT_3D('',#381096,#381097,#381098); +#381096 = CARTESIAN_POINT('',(151.20000005864,-61.90000005864,1.51)); +#381097 = DIRECTION('',(0.,0.,-1.)); +#381098 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#381099 = CYLINDRICAL_SURFACE('',#381100,0.150000058649); +#381100 = AXIS2_PLACEMENT_3D('',#381101,#381102,#381103); +#381101 = CARTESIAN_POINT('',(151.20000005864,-61.90000005864,1.51)); +#381102 = DIRECTION('',(0.,0.,-1.)); +#381103 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#381104 = ADVANCED_FACE('',(#381105),#381130,.T.); +#381105 = FACE_BOUND('',#381106,.T.); +#381106 = EDGE_LOOP('',(#381107,#381108,#381116,#381124)); +#381107 = ORIENTED_EDGE('',*,*,#381085,.T.); +#381108 = ORIENTED_EDGE('',*,*,#381109,.T.); +#381109 = EDGE_CURVE('',#381077,#381110,#381112,.T.); +#381110 = VERTEX_POINT('',#381111); +#381111 = CARTESIAN_POINT('',(151.5,-61.75,1.55)); +#381112 = LINE('',#381113,#381114); +#381113 = CARTESIAN_POINT('',(151.2,-61.75,1.55)); +#381114 = VECTOR('',#381115,1.); +#381115 = DIRECTION('',(1.,0.,0.)); +#381116 = ORIENTED_EDGE('',*,*,#381117,.F.); +#381117 = EDGE_CURVE('',#381118,#381110,#381120,.T.); +#381118 = VERTEX_POINT('',#381119); +#381119 = CARTESIAN_POINT('',(151.5,-61.75,1.51)); +#381120 = LINE('',#381121,#381122); +#381121 = CARTESIAN_POINT('',(151.5,-61.75,1.51)); +#381122 = VECTOR('',#381123,1.); +#381123 = DIRECTION('',(0.,0.,1.)); +#381124 = ORIENTED_EDGE('',*,*,#381125,.F.); +#381125 = EDGE_CURVE('',#381086,#381118,#381126,.T.); +#381126 = LINE('',#381127,#381128); +#381127 = CARTESIAN_POINT('',(151.2,-61.75,1.51)); +#381128 = VECTOR('',#381129,1.); +#381129 = DIRECTION('',(1.,0.,0.)); +#381130 = PLANE('',#381131); +#381131 = AXIS2_PLACEMENT_3D('',#381132,#381133,#381134); +#381132 = CARTESIAN_POINT('',(151.2,-61.75,1.51)); +#381133 = DIRECTION('',(0.,1.,0.)); +#381134 = DIRECTION('',(1.,0.,0.)); +#381135 = ADVANCED_FACE('',(#381136),#381163,.T.); +#381136 = FACE_BOUND('',#381137,.T.); +#381137 = EDGE_LOOP('',(#381138,#381139,#381148,#381156)); +#381138 = ORIENTED_EDGE('',*,*,#381117,.T.); +#381139 = ORIENTED_EDGE('',*,*,#381140,.T.); +#381140 = EDGE_CURVE('',#381110,#381141,#381143,.T.); +#381141 = VERTEX_POINT('',#381142); +#381142 = CARTESIAN_POINT('',(151.65,-61.9,1.55)); +#381143 = CIRCLE('',#381144,0.150000058649); +#381144 = AXIS2_PLACEMENT_3D('',#381145,#381146,#381147); +#381145 = CARTESIAN_POINT('',(151.49999994135,-61.90000005864,1.55)); +#381146 = DIRECTION('',(0.,0.,-1.)); +#381147 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#381148 = ORIENTED_EDGE('',*,*,#381149,.F.); +#381149 = EDGE_CURVE('',#381150,#381141,#381152,.T.); +#381150 = VERTEX_POINT('',#381151); +#381151 = CARTESIAN_POINT('',(151.65,-61.9,1.51)); +#381152 = LINE('',#381153,#381154); +#381153 = CARTESIAN_POINT('',(151.65,-61.9,1.51)); +#381154 = VECTOR('',#381155,1.); +#381155 = DIRECTION('',(0.,0.,1.)); +#381156 = ORIENTED_EDGE('',*,*,#381157,.F.); +#381157 = EDGE_CURVE('',#381118,#381150,#381158,.T.); +#381158 = CIRCLE('',#381159,0.150000058649); +#381159 = AXIS2_PLACEMENT_3D('',#381160,#381161,#381162); +#381160 = CARTESIAN_POINT('',(151.49999994135,-61.90000005864,1.51)); +#381161 = DIRECTION('',(0.,0.,-1.)); +#381162 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#381163 = CYLINDRICAL_SURFACE('',#381164,0.150000058649); +#381164 = AXIS2_PLACEMENT_3D('',#381165,#381166,#381167); +#381165 = CARTESIAN_POINT('',(151.49999994135,-61.90000005864,1.51)); +#381166 = DIRECTION('',(0.,0.,-1.)); +#381167 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#381168 = ADVANCED_FACE('',(#381169),#381194,.T.); +#381169 = FACE_BOUND('',#381170,.T.); +#381170 = EDGE_LOOP('',(#381171,#381172,#381180,#381188)); +#381171 = ORIENTED_EDGE('',*,*,#381149,.T.); +#381172 = ORIENTED_EDGE('',*,*,#381173,.T.); +#381173 = EDGE_CURVE('',#381141,#381174,#381176,.T.); +#381174 = VERTEX_POINT('',#381175); +#381175 = CARTESIAN_POINT('',(151.65,-63.4,1.55)); +#381176 = LINE('',#381177,#381178); +#381177 = CARTESIAN_POINT('',(151.65,-61.9,1.55)); +#381178 = VECTOR('',#381179,1.); +#381179 = DIRECTION('',(0.,-1.,0.)); +#381180 = ORIENTED_EDGE('',*,*,#381181,.F.); +#381181 = EDGE_CURVE('',#381182,#381174,#381184,.T.); +#381182 = VERTEX_POINT('',#381183); +#381183 = CARTESIAN_POINT('',(151.65,-63.4,1.51)); +#381184 = LINE('',#381185,#381186); +#381185 = CARTESIAN_POINT('',(151.65,-63.4,1.51)); +#381186 = VECTOR('',#381187,1.); +#381187 = DIRECTION('',(0.,0.,1.)); +#381188 = ORIENTED_EDGE('',*,*,#381189,.F.); +#381189 = EDGE_CURVE('',#381150,#381182,#381190,.T.); +#381190 = LINE('',#381191,#381192); +#381191 = CARTESIAN_POINT('',(151.65,-61.9,1.51)); +#381192 = VECTOR('',#381193,1.); +#381193 = DIRECTION('',(0.,-1.,0.)); +#381194 = PLANE('',#381195); +#381195 = AXIS2_PLACEMENT_3D('',#381196,#381197,#381198); +#381196 = CARTESIAN_POINT('',(151.65,-61.9,1.51)); +#381197 = DIRECTION('',(1.,0.,-0.)); +#381198 = DIRECTION('',(0.,-1.,0.)); +#381199 = ADVANCED_FACE('',(#381200),#381227,.T.); +#381200 = FACE_BOUND('',#381201,.T.); +#381201 = EDGE_LOOP('',(#381202,#381203,#381212,#381220)); +#381202 = ORIENTED_EDGE('',*,*,#381181,.T.); +#381203 = ORIENTED_EDGE('',*,*,#381204,.T.); +#381204 = EDGE_CURVE('',#381174,#381205,#381207,.T.); +#381205 = VERTEX_POINT('',#381206); +#381206 = CARTESIAN_POINT('',(151.5,-63.55,1.55)); +#381207 = CIRCLE('',#381208,0.150000058649); +#381208 = AXIS2_PLACEMENT_3D('',#381209,#381210,#381211); +#381209 = CARTESIAN_POINT('',(151.49999994135,-63.39999994135,1.55)); +#381210 = DIRECTION('',(0.,0.,-1.)); +#381211 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#381212 = ORIENTED_EDGE('',*,*,#381213,.F.); +#381213 = EDGE_CURVE('',#381214,#381205,#381216,.T.); +#381214 = VERTEX_POINT('',#381215); +#381215 = CARTESIAN_POINT('',(151.5,-63.55,1.51)); +#381216 = LINE('',#381217,#381218); +#381217 = CARTESIAN_POINT('',(151.5,-63.55,1.51)); +#381218 = VECTOR('',#381219,1.); +#381219 = DIRECTION('',(0.,0.,1.)); +#381220 = ORIENTED_EDGE('',*,*,#381221,.F.); +#381221 = EDGE_CURVE('',#381182,#381214,#381222,.T.); +#381222 = CIRCLE('',#381223,0.150000058649); +#381223 = AXIS2_PLACEMENT_3D('',#381224,#381225,#381226); +#381224 = CARTESIAN_POINT('',(151.49999994135,-63.39999994135,1.51)); +#381225 = DIRECTION('',(0.,0.,-1.)); +#381226 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#381227 = CYLINDRICAL_SURFACE('',#381228,0.150000058649); +#381228 = AXIS2_PLACEMENT_3D('',#381229,#381230,#381231); +#381229 = CARTESIAN_POINT('',(151.49999994135,-63.39999994135,1.51)); +#381230 = DIRECTION('',(0.,0.,-1.)); +#381231 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#381232 = ADVANCED_FACE('',(#381233),#381258,.T.); +#381233 = FACE_BOUND('',#381234,.T.); +#381234 = EDGE_LOOP('',(#381235,#381236,#381244,#381252)); +#381235 = ORIENTED_EDGE('',*,*,#381213,.T.); +#381236 = ORIENTED_EDGE('',*,*,#381237,.T.); +#381237 = EDGE_CURVE('',#381205,#381238,#381240,.T.); +#381238 = VERTEX_POINT('',#381239); +#381239 = CARTESIAN_POINT('',(151.2,-63.55,1.55)); +#381240 = LINE('',#381241,#381242); +#381241 = CARTESIAN_POINT('',(151.5,-63.55,1.55)); +#381242 = VECTOR('',#381243,1.); +#381243 = DIRECTION('',(-1.,0.,0.)); +#381244 = ORIENTED_EDGE('',*,*,#381245,.F.); +#381245 = EDGE_CURVE('',#381246,#381238,#381248,.T.); +#381246 = VERTEX_POINT('',#381247); +#381247 = CARTESIAN_POINT('',(151.2,-63.55,1.51)); +#381248 = LINE('',#381249,#381250); +#381249 = CARTESIAN_POINT('',(151.2,-63.55,1.51)); +#381250 = VECTOR('',#381251,1.); +#381251 = DIRECTION('',(0.,0.,1.)); +#381252 = ORIENTED_EDGE('',*,*,#381253,.F.); +#381253 = EDGE_CURVE('',#381214,#381246,#381254,.T.); +#381254 = LINE('',#381255,#381256); +#381255 = CARTESIAN_POINT('',(151.5,-63.55,1.51)); +#381256 = VECTOR('',#381257,1.); +#381257 = DIRECTION('',(-1.,0.,0.)); +#381258 = PLANE('',#381259); +#381259 = AXIS2_PLACEMENT_3D('',#381260,#381261,#381262); +#381260 = CARTESIAN_POINT('',(151.5,-63.55,1.51)); +#381261 = DIRECTION('',(0.,-1.,0.)); +#381262 = DIRECTION('',(-1.,0.,0.)); +#381263 = ADVANCED_FACE('',(#381264),#381291,.T.); +#381264 = FACE_BOUND('',#381265,.T.); +#381265 = EDGE_LOOP('',(#381266,#381267,#381276,#381284)); +#381266 = ORIENTED_EDGE('',*,*,#381245,.T.); +#381267 = ORIENTED_EDGE('',*,*,#381268,.T.); +#381268 = EDGE_CURVE('',#381238,#381269,#381271,.T.); +#381269 = VERTEX_POINT('',#381270); +#381270 = CARTESIAN_POINT('',(151.05,-63.4,1.55)); +#381271 = CIRCLE('',#381272,0.150000058649); +#381272 = AXIS2_PLACEMENT_3D('',#381273,#381274,#381275); +#381273 = CARTESIAN_POINT('',(151.20000005864,-63.39999994135,1.55)); +#381274 = DIRECTION('',(0.,0.,-1.)); +#381275 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#381276 = ORIENTED_EDGE('',*,*,#381277,.F.); +#381277 = EDGE_CURVE('',#381278,#381269,#381280,.T.); +#381278 = VERTEX_POINT('',#381279); +#381279 = CARTESIAN_POINT('',(151.05,-63.4,1.51)); +#381280 = LINE('',#381281,#381282); +#381281 = CARTESIAN_POINT('',(151.05,-63.4,1.51)); +#381282 = VECTOR('',#381283,1.); +#381283 = DIRECTION('',(0.,0.,1.)); +#381284 = ORIENTED_EDGE('',*,*,#381285,.F.); +#381285 = EDGE_CURVE('',#381246,#381278,#381286,.T.); +#381286 = CIRCLE('',#381287,0.150000058649); +#381287 = AXIS2_PLACEMENT_3D('',#381288,#381289,#381290); +#381288 = CARTESIAN_POINT('',(151.20000005864,-63.39999994135,1.51)); +#381289 = DIRECTION('',(0.,0.,-1.)); +#381290 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#381291 = CYLINDRICAL_SURFACE('',#381292,0.150000058649); +#381292 = AXIS2_PLACEMENT_3D('',#381293,#381294,#381295); +#381293 = CARTESIAN_POINT('',(151.20000005864,-63.39999994135,1.51)); +#381294 = DIRECTION('',(0.,0.,-1.)); +#381295 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#381296 = ADVANCED_FACE('',(#381297),#381313,.T.); +#381297 = FACE_BOUND('',#381298,.T.); +#381298 = EDGE_LOOP('',(#381299,#381300,#381306,#381307)); +#381299 = ORIENTED_EDGE('',*,*,#381277,.T.); +#381300 = ORIENTED_EDGE('',*,*,#381301,.T.); +#381301 = EDGE_CURVE('',#381269,#381069,#381302,.T.); +#381302 = LINE('',#381303,#381304); +#381303 = CARTESIAN_POINT('',(151.05,-63.4,1.55)); +#381304 = VECTOR('',#381305,1.); +#381305 = DIRECTION('',(0.,1.,0.)); +#381306 = ORIENTED_EDGE('',*,*,#381066,.F.); +#381307 = ORIENTED_EDGE('',*,*,#381308,.F.); +#381308 = EDGE_CURVE('',#381278,#381067,#381309,.T.); +#381309 = LINE('',#381310,#381311); +#381310 = CARTESIAN_POINT('',(151.05,-63.4,1.51)); +#381311 = VECTOR('',#381312,1.); +#381312 = DIRECTION('',(0.,1.,0.)); +#381313 = PLANE('',#381314); +#381314 = AXIS2_PLACEMENT_3D('',#381315,#381316,#381317); +#381315 = CARTESIAN_POINT('',(151.05,-63.4,1.51)); +#381316 = DIRECTION('',(-1.,0.,0.)); +#381317 = DIRECTION('',(0.,1.,0.)); +#381318 = ADVANCED_FACE('',(#381319),#381329,.F.); +#381319 = FACE_BOUND('',#381320,.T.); +#381320 = EDGE_LOOP('',(#381321,#381322,#381323,#381324,#381325,#381326, + #381327,#381328)); +#381321 = ORIENTED_EDGE('',*,*,#381093,.T.); +#381322 = ORIENTED_EDGE('',*,*,#381125,.T.); +#381323 = ORIENTED_EDGE('',*,*,#381157,.T.); +#381324 = ORIENTED_EDGE('',*,*,#381189,.T.); +#381325 = ORIENTED_EDGE('',*,*,#381221,.T.); +#381326 = ORIENTED_EDGE('',*,*,#381253,.T.); +#381327 = ORIENTED_EDGE('',*,*,#381285,.T.); +#381328 = ORIENTED_EDGE('',*,*,#381308,.T.); +#381329 = PLANE('',#381330); +#381330 = AXIS2_PLACEMENT_3D('',#381331,#381332,#381333); +#381331 = CARTESIAN_POINT('',(0.,0.,1.51)); +#381332 = DIRECTION('',(0.,0.,1.)); +#381333 = DIRECTION('',(1.,0.,-0.)); +#381334 = ADVANCED_FACE('',(#381335),#381345,.T.); +#381335 = FACE_BOUND('',#381336,.F.); +#381336 = EDGE_LOOP('',(#381337,#381338,#381339,#381340,#381341,#381342, + #381343,#381344)); +#381337 = ORIENTED_EDGE('',*,*,#381076,.T.); +#381338 = ORIENTED_EDGE('',*,*,#381109,.T.); +#381339 = ORIENTED_EDGE('',*,*,#381140,.T.); +#381340 = ORIENTED_EDGE('',*,*,#381173,.T.); +#381341 = ORIENTED_EDGE('',*,*,#381204,.T.); +#381342 = ORIENTED_EDGE('',*,*,#381237,.T.); +#381343 = ORIENTED_EDGE('',*,*,#381268,.T.); +#381344 = ORIENTED_EDGE('',*,*,#381301,.T.); +#381345 = PLANE('',#381346); +#381346 = AXIS2_PLACEMENT_3D('',#381347,#381348,#381349); +#381347 = CARTESIAN_POINT('',(0.,0.,1.55)); +#381348 = DIRECTION('',(0.,0.,1.)); +#381349 = DIRECTION('',(1.,0.,-0.)); +#381350 = MANIFOLD_SOLID_BREP('',#381351); +#381351 = CLOSED_SHELL('',(#381352,#381394,#381425,#381458,#381489, + #381522,#381553,#381586,#381608,#381624)); +#381352 = ADVANCED_FACE('',(#381353),#381389,.T.); +#381353 = FACE_BOUND('',#381354,.T.); +#381354 = EDGE_LOOP('',(#381355,#381365,#381374,#381382)); +#381355 = ORIENTED_EDGE('',*,*,#381356,.T.); +#381356 = EDGE_CURVE('',#381357,#381359,#381361,.T.); +#381357 = VERTEX_POINT('',#381358); +#381358 = CARTESIAN_POINT('',(139.5,-120.75,1.51)); +#381359 = VERTEX_POINT('',#381360); +#381360 = CARTESIAN_POINT('',(139.5,-120.75,1.55)); +#381361 = LINE('',#381362,#381363); +#381362 = CARTESIAN_POINT('',(139.5,-120.75,1.51)); +#381363 = VECTOR('',#381364,1.); +#381364 = DIRECTION('',(0.,0.,1.)); +#381365 = ORIENTED_EDGE('',*,*,#381366,.T.); +#381366 = EDGE_CURVE('',#381359,#381367,#381369,.T.); +#381367 = VERTEX_POINT('',#381368); +#381368 = CARTESIAN_POINT('',(140.,-120.25,1.55)); +#381369 = CIRCLE('',#381370,0.500001333575); +#381370 = AXIS2_PLACEMENT_3D('',#381371,#381372,#381373); +#381371 = CARTESIAN_POINT('',(140.00000133357,-120.7500013335,1.55)); +#381372 = DIRECTION('',(0.,0.,-1.)); +#381373 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381374 = ORIENTED_EDGE('',*,*,#381375,.F.); +#381375 = EDGE_CURVE('',#381376,#381367,#381378,.T.); +#381376 = VERTEX_POINT('',#381377); +#381377 = CARTESIAN_POINT('',(140.,-120.25,1.51)); +#381378 = LINE('',#381379,#381380); +#381379 = CARTESIAN_POINT('',(140.,-120.25,1.51)); +#381380 = VECTOR('',#381381,1.); +#381381 = DIRECTION('',(0.,0.,1.)); +#381382 = ORIENTED_EDGE('',*,*,#381383,.F.); +#381383 = EDGE_CURVE('',#381357,#381376,#381384,.T.); +#381384 = CIRCLE('',#381385,0.500001333575); +#381385 = AXIS2_PLACEMENT_3D('',#381386,#381387,#381388); +#381386 = CARTESIAN_POINT('',(140.00000133357,-120.7500013335,1.51)); +#381387 = DIRECTION('',(0.,0.,-1.)); +#381388 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381389 = CYLINDRICAL_SURFACE('',#381390,0.500001333575); +#381390 = AXIS2_PLACEMENT_3D('',#381391,#381392,#381393); +#381391 = CARTESIAN_POINT('',(140.00000133357,-120.7500013335,1.51)); +#381392 = DIRECTION('',(0.,0.,-1.)); +#381393 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381394 = ADVANCED_FACE('',(#381395),#381420,.T.); +#381395 = FACE_BOUND('',#381396,.T.); +#381396 = EDGE_LOOP('',(#381397,#381398,#381406,#381414)); +#381397 = ORIENTED_EDGE('',*,*,#381375,.T.); +#381398 = ORIENTED_EDGE('',*,*,#381399,.T.); +#381399 = EDGE_CURVE('',#381367,#381400,#381402,.T.); +#381400 = VERTEX_POINT('',#381401); +#381401 = CARTESIAN_POINT('',(141.,-120.25,1.55)); +#381402 = LINE('',#381403,#381404); +#381403 = CARTESIAN_POINT('',(140.,-120.25,1.55)); +#381404 = VECTOR('',#381405,1.); +#381405 = DIRECTION('',(1.,0.,0.)); +#381406 = ORIENTED_EDGE('',*,*,#381407,.F.); +#381407 = EDGE_CURVE('',#381408,#381400,#381410,.T.); +#381408 = VERTEX_POINT('',#381409); +#381409 = CARTESIAN_POINT('',(141.,-120.25,1.51)); +#381410 = LINE('',#381411,#381412); +#381411 = CARTESIAN_POINT('',(141.,-120.25,1.51)); +#381412 = VECTOR('',#381413,1.); +#381413 = DIRECTION('',(0.,0.,1.)); +#381414 = ORIENTED_EDGE('',*,*,#381415,.F.); +#381415 = EDGE_CURVE('',#381376,#381408,#381416,.T.); +#381416 = LINE('',#381417,#381418); +#381417 = CARTESIAN_POINT('',(140.,-120.25,1.51)); +#381418 = VECTOR('',#381419,1.); +#381419 = DIRECTION('',(1.,0.,0.)); +#381420 = PLANE('',#381421); +#381421 = AXIS2_PLACEMENT_3D('',#381422,#381423,#381424); +#381422 = CARTESIAN_POINT('',(140.,-120.25,1.51)); +#381423 = DIRECTION('',(0.,1.,0.)); +#381424 = DIRECTION('',(1.,0.,0.)); +#381425 = ADVANCED_FACE('',(#381426),#381453,.T.); +#381426 = FACE_BOUND('',#381427,.T.); +#381427 = EDGE_LOOP('',(#381428,#381429,#381438,#381446)); +#381428 = ORIENTED_EDGE('',*,*,#381407,.T.); +#381429 = ORIENTED_EDGE('',*,*,#381430,.T.); +#381430 = EDGE_CURVE('',#381400,#381431,#381433,.T.); +#381431 = VERTEX_POINT('',#381432); +#381432 = CARTESIAN_POINT('',(141.5,-120.75,1.55)); +#381433 = CIRCLE('',#381434,0.500001333575); +#381434 = AXIS2_PLACEMENT_3D('',#381435,#381436,#381437); +#381435 = CARTESIAN_POINT('',(140.99999866642,-120.7500013335,1.55)); +#381436 = DIRECTION('',(0.,0.,-1.)); +#381437 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#381438 = ORIENTED_EDGE('',*,*,#381439,.F.); +#381439 = EDGE_CURVE('',#381440,#381431,#381442,.T.); +#381440 = VERTEX_POINT('',#381441); +#381441 = CARTESIAN_POINT('',(141.5,-120.75,1.51)); +#381442 = LINE('',#381443,#381444); +#381443 = CARTESIAN_POINT('',(141.5,-120.75,1.51)); +#381444 = VECTOR('',#381445,1.); +#381445 = DIRECTION('',(0.,0.,1.)); +#381446 = ORIENTED_EDGE('',*,*,#381447,.F.); +#381447 = EDGE_CURVE('',#381408,#381440,#381448,.T.); +#381448 = CIRCLE('',#381449,0.500001333575); +#381449 = AXIS2_PLACEMENT_3D('',#381450,#381451,#381452); +#381450 = CARTESIAN_POINT('',(140.99999866642,-120.7500013335,1.51)); +#381451 = DIRECTION('',(0.,0.,-1.)); +#381452 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#381453 = CYLINDRICAL_SURFACE('',#381454,0.500001333575); +#381454 = AXIS2_PLACEMENT_3D('',#381455,#381456,#381457); +#381455 = CARTESIAN_POINT('',(140.99999866642,-120.7500013335,1.51)); +#381456 = DIRECTION('',(0.,0.,-1.)); +#381457 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#381458 = ADVANCED_FACE('',(#381459),#381484,.T.); +#381459 = FACE_BOUND('',#381460,.T.); +#381460 = EDGE_LOOP('',(#381461,#381462,#381470,#381478)); +#381461 = ORIENTED_EDGE('',*,*,#381439,.T.); +#381462 = ORIENTED_EDGE('',*,*,#381463,.T.); +#381463 = EDGE_CURVE('',#381431,#381464,#381466,.T.); +#381464 = VERTEX_POINT('',#381465); +#381465 = CARTESIAN_POINT('',(141.5,-121.75,1.55)); +#381466 = LINE('',#381467,#381468); +#381467 = CARTESIAN_POINT('',(141.5,-120.75,1.55)); +#381468 = VECTOR('',#381469,1.); +#381469 = DIRECTION('',(0.,-1.,0.)); +#381470 = ORIENTED_EDGE('',*,*,#381471,.F.); +#381471 = EDGE_CURVE('',#381472,#381464,#381474,.T.); +#381472 = VERTEX_POINT('',#381473); +#381473 = CARTESIAN_POINT('',(141.5,-121.75,1.51)); +#381474 = LINE('',#381475,#381476); +#381475 = CARTESIAN_POINT('',(141.5,-121.75,1.51)); +#381476 = VECTOR('',#381477,1.); +#381477 = DIRECTION('',(0.,0.,1.)); +#381478 = ORIENTED_EDGE('',*,*,#381479,.F.); +#381479 = EDGE_CURVE('',#381440,#381472,#381480,.T.); +#381480 = LINE('',#381481,#381482); +#381481 = CARTESIAN_POINT('',(141.5,-120.75,1.51)); +#381482 = VECTOR('',#381483,1.); +#381483 = DIRECTION('',(0.,-1.,0.)); +#381484 = PLANE('',#381485); +#381485 = AXIS2_PLACEMENT_3D('',#381486,#381487,#381488); +#381486 = CARTESIAN_POINT('',(141.5,-120.75,1.51)); +#381487 = DIRECTION('',(1.,0.,-0.)); +#381488 = DIRECTION('',(0.,-1.,0.)); +#381489 = ADVANCED_FACE('',(#381490),#381517,.T.); +#381490 = FACE_BOUND('',#381491,.T.); +#381491 = EDGE_LOOP('',(#381492,#381493,#381502,#381510)); +#381492 = ORIENTED_EDGE('',*,*,#381471,.T.); +#381493 = ORIENTED_EDGE('',*,*,#381494,.T.); +#381494 = EDGE_CURVE('',#381464,#381495,#381497,.T.); +#381495 = VERTEX_POINT('',#381496); +#381496 = CARTESIAN_POINT('',(141.,-122.25,1.55)); +#381497 = CIRCLE('',#381498,0.500001333575); +#381498 = AXIS2_PLACEMENT_3D('',#381499,#381500,#381501); +#381499 = CARTESIAN_POINT('',(140.99999866642,-121.7499986664,1.55)); +#381500 = DIRECTION('',(0.,0.,-1.)); +#381501 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#381502 = ORIENTED_EDGE('',*,*,#381503,.F.); +#381503 = EDGE_CURVE('',#381504,#381495,#381506,.T.); +#381504 = VERTEX_POINT('',#381505); +#381505 = CARTESIAN_POINT('',(141.,-122.25,1.51)); +#381506 = LINE('',#381507,#381508); +#381507 = CARTESIAN_POINT('',(141.,-122.25,1.51)); +#381508 = VECTOR('',#381509,1.); +#381509 = DIRECTION('',(0.,0.,1.)); +#381510 = ORIENTED_EDGE('',*,*,#381511,.F.); +#381511 = EDGE_CURVE('',#381472,#381504,#381512,.T.); +#381512 = CIRCLE('',#381513,0.500001333575); +#381513 = AXIS2_PLACEMENT_3D('',#381514,#381515,#381516); +#381514 = CARTESIAN_POINT('',(140.99999866642,-121.7499986664,1.51)); +#381515 = DIRECTION('',(0.,0.,-1.)); +#381516 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#381517 = CYLINDRICAL_SURFACE('',#381518,0.500001333575); +#381518 = AXIS2_PLACEMENT_3D('',#381519,#381520,#381521); +#381519 = CARTESIAN_POINT('',(140.99999866642,-121.7499986664,1.51)); +#381520 = DIRECTION('',(0.,0.,-1.)); +#381521 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#381522 = ADVANCED_FACE('',(#381523),#381548,.T.); +#381523 = FACE_BOUND('',#381524,.T.); +#381524 = EDGE_LOOP('',(#381525,#381526,#381534,#381542)); +#381525 = ORIENTED_EDGE('',*,*,#381503,.T.); +#381526 = ORIENTED_EDGE('',*,*,#381527,.T.); +#381527 = EDGE_CURVE('',#381495,#381528,#381530,.T.); +#381528 = VERTEX_POINT('',#381529); +#381529 = CARTESIAN_POINT('',(140.,-122.25,1.55)); +#381530 = LINE('',#381531,#381532); +#381531 = CARTESIAN_POINT('',(141.,-122.25,1.55)); +#381532 = VECTOR('',#381533,1.); +#381533 = DIRECTION('',(-1.,0.,0.)); +#381534 = ORIENTED_EDGE('',*,*,#381535,.F.); +#381535 = EDGE_CURVE('',#381536,#381528,#381538,.T.); +#381536 = VERTEX_POINT('',#381537); +#381537 = CARTESIAN_POINT('',(140.,-122.25,1.51)); +#381538 = LINE('',#381539,#381540); +#381539 = CARTESIAN_POINT('',(140.,-122.25,1.51)); +#381540 = VECTOR('',#381541,1.); +#381541 = DIRECTION('',(0.,0.,1.)); +#381542 = ORIENTED_EDGE('',*,*,#381543,.F.); +#381543 = EDGE_CURVE('',#381504,#381536,#381544,.T.); +#381544 = LINE('',#381545,#381546); +#381545 = CARTESIAN_POINT('',(141.,-122.25,1.51)); +#381546 = VECTOR('',#381547,1.); +#381547 = DIRECTION('',(-1.,0.,0.)); +#381548 = PLANE('',#381549); +#381549 = AXIS2_PLACEMENT_3D('',#381550,#381551,#381552); +#381550 = CARTESIAN_POINT('',(141.,-122.25,1.51)); +#381551 = DIRECTION('',(0.,-1.,0.)); +#381552 = DIRECTION('',(-1.,0.,0.)); +#381553 = ADVANCED_FACE('',(#381554),#381581,.T.); +#381554 = FACE_BOUND('',#381555,.T.); +#381555 = EDGE_LOOP('',(#381556,#381557,#381566,#381574)); +#381556 = ORIENTED_EDGE('',*,*,#381535,.T.); +#381557 = ORIENTED_EDGE('',*,*,#381558,.T.); +#381558 = EDGE_CURVE('',#381528,#381559,#381561,.T.); +#381559 = VERTEX_POINT('',#381560); +#381560 = CARTESIAN_POINT('',(139.5,-121.75,1.55)); +#381561 = CIRCLE('',#381562,0.500001333575); +#381562 = AXIS2_PLACEMENT_3D('',#381563,#381564,#381565); +#381563 = CARTESIAN_POINT('',(140.00000133357,-121.7499986664,1.55)); +#381564 = DIRECTION('',(0.,0.,-1.)); +#381565 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#381566 = ORIENTED_EDGE('',*,*,#381567,.F.); +#381567 = EDGE_CURVE('',#381568,#381559,#381570,.T.); +#381568 = VERTEX_POINT('',#381569); +#381569 = CARTESIAN_POINT('',(139.5,-121.75,1.51)); +#381570 = LINE('',#381571,#381572); +#381571 = CARTESIAN_POINT('',(139.5,-121.75,1.51)); +#381572 = VECTOR('',#381573,1.); +#381573 = DIRECTION('',(0.,0.,1.)); +#381574 = ORIENTED_EDGE('',*,*,#381575,.F.); +#381575 = EDGE_CURVE('',#381536,#381568,#381576,.T.); +#381576 = CIRCLE('',#381577,0.500001333575); +#381577 = AXIS2_PLACEMENT_3D('',#381578,#381579,#381580); +#381578 = CARTESIAN_POINT('',(140.00000133357,-121.7499986664,1.51)); +#381579 = DIRECTION('',(0.,0.,-1.)); +#381580 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#381581 = CYLINDRICAL_SURFACE('',#381582,0.500001333575); +#381582 = AXIS2_PLACEMENT_3D('',#381583,#381584,#381585); +#381583 = CARTESIAN_POINT('',(140.00000133357,-121.7499986664,1.51)); +#381584 = DIRECTION('',(0.,0.,-1.)); +#381585 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#381586 = ADVANCED_FACE('',(#381587),#381603,.T.); +#381587 = FACE_BOUND('',#381588,.T.); +#381588 = EDGE_LOOP('',(#381589,#381590,#381596,#381597)); +#381589 = ORIENTED_EDGE('',*,*,#381567,.T.); +#381590 = ORIENTED_EDGE('',*,*,#381591,.T.); +#381591 = EDGE_CURVE('',#381559,#381359,#381592,.T.); +#381592 = LINE('',#381593,#381594); +#381593 = CARTESIAN_POINT('',(139.5,-121.75,1.55)); +#381594 = VECTOR('',#381595,1.); +#381595 = DIRECTION('',(0.,1.,0.)); +#381596 = ORIENTED_EDGE('',*,*,#381356,.F.); +#381597 = ORIENTED_EDGE('',*,*,#381598,.F.); +#381598 = EDGE_CURVE('',#381568,#381357,#381599,.T.); +#381599 = LINE('',#381600,#381601); +#381600 = CARTESIAN_POINT('',(139.5,-121.75,1.51)); +#381601 = VECTOR('',#381602,1.); +#381602 = DIRECTION('',(0.,1.,0.)); +#381603 = PLANE('',#381604); +#381604 = AXIS2_PLACEMENT_3D('',#381605,#381606,#381607); +#381605 = CARTESIAN_POINT('',(139.5,-121.75,1.51)); +#381606 = DIRECTION('',(-1.,0.,0.)); +#381607 = DIRECTION('',(0.,1.,0.)); +#381608 = ADVANCED_FACE('',(#381609),#381619,.F.); +#381609 = FACE_BOUND('',#381610,.T.); +#381610 = EDGE_LOOP('',(#381611,#381612,#381613,#381614,#381615,#381616, + #381617,#381618)); +#381611 = ORIENTED_EDGE('',*,*,#381383,.T.); +#381612 = ORIENTED_EDGE('',*,*,#381415,.T.); +#381613 = ORIENTED_EDGE('',*,*,#381447,.T.); +#381614 = ORIENTED_EDGE('',*,*,#381479,.T.); +#381615 = ORIENTED_EDGE('',*,*,#381511,.T.); +#381616 = ORIENTED_EDGE('',*,*,#381543,.T.); +#381617 = ORIENTED_EDGE('',*,*,#381575,.T.); +#381618 = ORIENTED_EDGE('',*,*,#381598,.T.); +#381619 = PLANE('',#381620); +#381620 = AXIS2_PLACEMENT_3D('',#381621,#381622,#381623); +#381621 = CARTESIAN_POINT('',(0.,0.,1.51)); +#381622 = DIRECTION('',(0.,0.,1.)); +#381623 = DIRECTION('',(1.,0.,-0.)); +#381624 = ADVANCED_FACE('',(#381625),#381635,.T.); +#381625 = FACE_BOUND('',#381626,.F.); +#381626 = EDGE_LOOP('',(#381627,#381628,#381629,#381630,#381631,#381632, + #381633,#381634)); +#381627 = ORIENTED_EDGE('',*,*,#381366,.T.); +#381628 = ORIENTED_EDGE('',*,*,#381399,.T.); +#381629 = ORIENTED_EDGE('',*,*,#381430,.T.); +#381630 = ORIENTED_EDGE('',*,*,#381463,.T.); +#381631 = ORIENTED_EDGE('',*,*,#381494,.T.); +#381632 = ORIENTED_EDGE('',*,*,#381527,.T.); +#381633 = ORIENTED_EDGE('',*,*,#381558,.T.); +#381634 = ORIENTED_EDGE('',*,*,#381591,.T.); +#381635 = PLANE('',#381636); +#381636 = AXIS2_PLACEMENT_3D('',#381637,#381638,#381639); +#381637 = CARTESIAN_POINT('',(0.,0.,1.55)); +#381638 = DIRECTION('',(0.,0.,1.)); +#381639 = DIRECTION('',(1.,0.,-0.)); +#381640 = MANIFOLD_SOLID_BREP('',#381641); +#381641 = CLOSED_SHELL('',(#381642,#381684,#381715,#381748,#381779, + #381812,#381843,#381876,#381898,#381914)); +#381642 = ADVANCED_FACE('',(#381643),#381679,.T.); +#381643 = FACE_BOUND('',#381644,.T.); +#381644 = EDGE_LOOP('',(#381645,#381655,#381664,#381672)); +#381645 = ORIENTED_EDGE('',*,*,#381646,.T.); +#381646 = EDGE_CURVE('',#381647,#381649,#381651,.T.); +#381647 = VERTEX_POINT('',#381648); +#381648 = CARTESIAN_POINT('',(133.97,-131.08,1.51)); +#381649 = VERTEX_POINT('',#381650); +#381650 = CARTESIAN_POINT('',(133.97,-131.08,1.55)); +#381651 = LINE('',#381652,#381653); +#381652 = CARTESIAN_POINT('',(133.97,-131.08,1.51)); +#381653 = VECTOR('',#381654,1.); +#381654 = DIRECTION('',(0.,0.,1.)); +#381655 = ORIENTED_EDGE('',*,*,#381656,.T.); +#381656 = EDGE_CURVE('',#381649,#381657,#381659,.T.); +#381657 = VERTEX_POINT('',#381658); +#381658 = CARTESIAN_POINT('',(134.11,-130.94,1.55)); +#381659 = CIRCLE('',#381660,0.139999827126); +#381660 = AXIS2_PLACEMENT_3D('',#381661,#381662,#381663); +#381661 = CARTESIAN_POINT('',(134.10999982712,-131.0799998271,1.55)); +#381662 = DIRECTION('',(0.,0.,-1.)); +#381663 = DIRECTION('',(-0.999999999999,-1.234820045228E-06,-0.)); +#381664 = ORIENTED_EDGE('',*,*,#381665,.F.); +#381665 = EDGE_CURVE('',#381666,#381657,#381668,.T.); +#381666 = VERTEX_POINT('',#381667); +#381667 = CARTESIAN_POINT('',(134.11,-130.94,1.51)); +#381668 = LINE('',#381669,#381670); +#381669 = CARTESIAN_POINT('',(134.11,-130.94,1.51)); +#381670 = VECTOR('',#381671,1.); +#381671 = DIRECTION('',(0.,0.,1.)); +#381672 = ORIENTED_EDGE('',*,*,#381673,.F.); +#381673 = EDGE_CURVE('',#381647,#381666,#381674,.T.); +#381674 = CIRCLE('',#381675,0.139999827126); +#381675 = AXIS2_PLACEMENT_3D('',#381676,#381677,#381678); +#381676 = CARTESIAN_POINT('',(134.10999982712,-131.0799998271,1.51)); +#381677 = DIRECTION('',(0.,0.,-1.)); +#381678 = DIRECTION('',(-0.999999999999,-1.234820045228E-06,-0.)); +#381679 = CYLINDRICAL_SURFACE('',#381680,0.139999827126); +#381680 = AXIS2_PLACEMENT_3D('',#381681,#381682,#381683); +#381681 = CARTESIAN_POINT('',(134.10999982712,-131.0799998271,1.51)); +#381682 = DIRECTION('',(0.,0.,-1.)); +#381683 = DIRECTION('',(-0.999999999999,-1.234820045228E-06,-0.)); +#381684 = ADVANCED_FACE('',(#381685),#381710,.T.); +#381685 = FACE_BOUND('',#381686,.T.); +#381686 = EDGE_LOOP('',(#381687,#381688,#381696,#381704)); +#381687 = ORIENTED_EDGE('',*,*,#381665,.T.); +#381688 = ORIENTED_EDGE('',*,*,#381689,.T.); +#381689 = EDGE_CURVE('',#381657,#381690,#381692,.T.); +#381690 = VERTEX_POINT('',#381691); +#381691 = CARTESIAN_POINT('',(134.39,-130.94,1.55)); +#381692 = LINE('',#381693,#381694); +#381693 = CARTESIAN_POINT('',(134.11,-130.94,1.55)); +#381694 = VECTOR('',#381695,1.); +#381695 = DIRECTION('',(1.,0.,0.)); +#381696 = ORIENTED_EDGE('',*,*,#381697,.F.); +#381697 = EDGE_CURVE('',#381698,#381690,#381700,.T.); +#381698 = VERTEX_POINT('',#381699); +#381699 = CARTESIAN_POINT('',(134.39,-130.94,1.51)); +#381700 = LINE('',#381701,#381702); +#381701 = CARTESIAN_POINT('',(134.39,-130.94,1.51)); +#381702 = VECTOR('',#381703,1.); +#381703 = DIRECTION('',(0.,0.,1.)); +#381704 = ORIENTED_EDGE('',*,*,#381705,.F.); +#381705 = EDGE_CURVE('',#381666,#381698,#381706,.T.); +#381706 = LINE('',#381707,#381708); +#381707 = CARTESIAN_POINT('',(134.11,-130.94,1.51)); +#381708 = VECTOR('',#381709,1.); +#381709 = DIRECTION('',(1.,0.,0.)); +#381710 = PLANE('',#381711); +#381711 = AXIS2_PLACEMENT_3D('',#381712,#381713,#381714); +#381712 = CARTESIAN_POINT('',(134.11,-130.94,1.51)); +#381713 = DIRECTION('',(0.,1.,0.)); +#381714 = DIRECTION('',(1.,0.,0.)); +#381715 = ADVANCED_FACE('',(#381716),#381743,.T.); +#381716 = FACE_BOUND('',#381717,.T.); +#381717 = EDGE_LOOP('',(#381718,#381719,#381728,#381736)); +#381718 = ORIENTED_EDGE('',*,*,#381697,.T.); +#381719 = ORIENTED_EDGE('',*,*,#381720,.T.); +#381720 = EDGE_CURVE('',#381690,#381721,#381723,.T.); +#381721 = VERTEX_POINT('',#381722); +#381722 = CARTESIAN_POINT('',(134.53,-131.08,1.55)); +#381723 = CIRCLE('',#381724,0.139999827126); +#381724 = AXIS2_PLACEMENT_3D('',#381725,#381726,#381727); +#381725 = CARTESIAN_POINT('',(134.39000017287,-131.0799998271,1.55)); +#381726 = DIRECTION('',(0.,0.,-1.)); +#381727 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#381728 = ORIENTED_EDGE('',*,*,#381729,.F.); +#381729 = EDGE_CURVE('',#381730,#381721,#381732,.T.); +#381730 = VERTEX_POINT('',#381731); +#381731 = CARTESIAN_POINT('',(134.53,-131.08,1.51)); +#381732 = LINE('',#381733,#381734); +#381733 = CARTESIAN_POINT('',(134.53,-131.08,1.51)); +#381734 = VECTOR('',#381735,1.); +#381735 = DIRECTION('',(0.,0.,1.)); +#381736 = ORIENTED_EDGE('',*,*,#381737,.F.); +#381737 = EDGE_CURVE('',#381698,#381730,#381738,.T.); +#381738 = CIRCLE('',#381739,0.139999827126); +#381739 = AXIS2_PLACEMENT_3D('',#381740,#381741,#381742); +#381740 = CARTESIAN_POINT('',(134.39000017287,-131.0799998271,1.51)); +#381741 = DIRECTION('',(0.,0.,-1.)); +#381742 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#381743 = CYLINDRICAL_SURFACE('',#381744,0.139999827126); +#381744 = AXIS2_PLACEMENT_3D('',#381745,#381746,#381747); +#381745 = CARTESIAN_POINT('',(134.39000017287,-131.0799998271,1.51)); +#381746 = DIRECTION('',(0.,0.,-1.)); +#381747 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#381748 = ADVANCED_FACE('',(#381749),#381774,.T.); +#381749 = FACE_BOUND('',#381750,.T.); +#381750 = EDGE_LOOP('',(#381751,#381752,#381760,#381768)); +#381751 = ORIENTED_EDGE('',*,*,#381729,.T.); +#381752 = ORIENTED_EDGE('',*,*,#381753,.T.); +#381753 = EDGE_CURVE('',#381721,#381754,#381756,.T.); +#381754 = VERTEX_POINT('',#381755); +#381755 = CARTESIAN_POINT('',(134.53,-131.42,1.55)); +#381756 = LINE('',#381757,#381758); +#381757 = CARTESIAN_POINT('',(134.53,-131.08,1.55)); +#381758 = VECTOR('',#381759,1.); +#381759 = DIRECTION('',(0.,-1.,0.)); +#381760 = ORIENTED_EDGE('',*,*,#381761,.F.); +#381761 = EDGE_CURVE('',#381762,#381754,#381764,.T.); +#381762 = VERTEX_POINT('',#381763); +#381763 = CARTESIAN_POINT('',(134.53,-131.42,1.51)); +#381764 = LINE('',#381765,#381766); +#381765 = CARTESIAN_POINT('',(134.53,-131.42,1.51)); +#381766 = VECTOR('',#381767,1.); +#381767 = DIRECTION('',(0.,0.,1.)); +#381768 = ORIENTED_EDGE('',*,*,#381769,.F.); +#381769 = EDGE_CURVE('',#381730,#381762,#381770,.T.); +#381770 = LINE('',#381771,#381772); +#381771 = CARTESIAN_POINT('',(134.53,-131.08,1.51)); +#381772 = VECTOR('',#381773,1.); +#381773 = DIRECTION('',(0.,-1.,0.)); +#381774 = PLANE('',#381775); +#381775 = AXIS2_PLACEMENT_3D('',#381776,#381777,#381778); +#381776 = CARTESIAN_POINT('',(134.53,-131.08,1.51)); +#381777 = DIRECTION('',(1.,0.,-0.)); +#381778 = DIRECTION('',(0.,-1.,0.)); +#381779 = ADVANCED_FACE('',(#381780),#381807,.T.); +#381780 = FACE_BOUND('',#381781,.T.); +#381781 = EDGE_LOOP('',(#381782,#381783,#381792,#381800)); +#381782 = ORIENTED_EDGE('',*,*,#381761,.T.); +#381783 = ORIENTED_EDGE('',*,*,#381784,.T.); +#381784 = EDGE_CURVE('',#381754,#381785,#381787,.T.); +#381785 = VERTEX_POINT('',#381786); +#381786 = CARTESIAN_POINT('',(134.39,-131.56,1.55)); +#381787 = CIRCLE('',#381788,0.139999827126); +#381788 = AXIS2_PLACEMENT_3D('',#381789,#381790,#381791); +#381789 = CARTESIAN_POINT('',(134.39000017287,-131.4200001728,1.55)); +#381790 = DIRECTION('',(0.,0.,-1.)); +#381791 = DIRECTION('',(0.999999999999,1.234820045228E-06,0.)); +#381792 = ORIENTED_EDGE('',*,*,#381793,.F.); +#381793 = EDGE_CURVE('',#381794,#381785,#381796,.T.); +#381794 = VERTEX_POINT('',#381795); +#381795 = CARTESIAN_POINT('',(134.39,-131.56,1.51)); +#381796 = LINE('',#381797,#381798); +#381797 = CARTESIAN_POINT('',(134.39,-131.56,1.51)); +#381798 = VECTOR('',#381799,1.); +#381799 = DIRECTION('',(0.,0.,1.)); +#381800 = ORIENTED_EDGE('',*,*,#381801,.F.); +#381801 = EDGE_CURVE('',#381762,#381794,#381802,.T.); +#381802 = CIRCLE('',#381803,0.139999827126); +#381803 = AXIS2_PLACEMENT_3D('',#381804,#381805,#381806); +#381804 = CARTESIAN_POINT('',(134.39000017287,-131.4200001728,1.51)); +#381805 = DIRECTION('',(0.,0.,-1.)); +#381806 = DIRECTION('',(0.999999999999,1.234820045228E-06,0.)); +#381807 = CYLINDRICAL_SURFACE('',#381808,0.139999827126); +#381808 = AXIS2_PLACEMENT_3D('',#381809,#381810,#381811); +#381809 = CARTESIAN_POINT('',(134.39000017287,-131.4200001728,1.51)); +#381810 = DIRECTION('',(0.,0.,-1.)); +#381811 = DIRECTION('',(0.999999999999,1.234820045228E-06,0.)); +#381812 = ADVANCED_FACE('',(#381813),#381838,.T.); +#381813 = FACE_BOUND('',#381814,.T.); +#381814 = EDGE_LOOP('',(#381815,#381816,#381824,#381832)); +#381815 = ORIENTED_EDGE('',*,*,#381793,.T.); +#381816 = ORIENTED_EDGE('',*,*,#381817,.T.); +#381817 = EDGE_CURVE('',#381785,#381818,#381820,.T.); +#381818 = VERTEX_POINT('',#381819); +#381819 = CARTESIAN_POINT('',(134.11,-131.56,1.55)); +#381820 = LINE('',#381821,#381822); +#381821 = CARTESIAN_POINT('',(134.39,-131.56,1.55)); +#381822 = VECTOR('',#381823,1.); +#381823 = DIRECTION('',(-1.,0.,0.)); +#381824 = ORIENTED_EDGE('',*,*,#381825,.F.); +#381825 = EDGE_CURVE('',#381826,#381818,#381828,.T.); +#381826 = VERTEX_POINT('',#381827); +#381827 = CARTESIAN_POINT('',(134.11,-131.56,1.51)); +#381828 = LINE('',#381829,#381830); +#381829 = CARTESIAN_POINT('',(134.11,-131.56,1.51)); +#381830 = VECTOR('',#381831,1.); +#381831 = DIRECTION('',(0.,0.,1.)); +#381832 = ORIENTED_EDGE('',*,*,#381833,.F.); +#381833 = EDGE_CURVE('',#381794,#381826,#381834,.T.); +#381834 = LINE('',#381835,#381836); +#381835 = CARTESIAN_POINT('',(134.39,-131.56,1.51)); +#381836 = VECTOR('',#381837,1.); +#381837 = DIRECTION('',(-1.,0.,0.)); +#381838 = PLANE('',#381839); +#381839 = AXIS2_PLACEMENT_3D('',#381840,#381841,#381842); +#381840 = CARTESIAN_POINT('',(134.39,-131.56,1.51)); +#381841 = DIRECTION('',(0.,-1.,0.)); +#381842 = DIRECTION('',(-1.,0.,0.)); +#381843 = ADVANCED_FACE('',(#381844),#381871,.T.); +#381844 = FACE_BOUND('',#381845,.T.); +#381845 = EDGE_LOOP('',(#381846,#381847,#381856,#381864)); +#381846 = ORIENTED_EDGE('',*,*,#381825,.T.); +#381847 = ORIENTED_EDGE('',*,*,#381848,.T.); +#381848 = EDGE_CURVE('',#381818,#381849,#381851,.T.); +#381849 = VERTEX_POINT('',#381850); +#381850 = CARTESIAN_POINT('',(133.97,-131.42,1.55)); +#381851 = CIRCLE('',#381852,0.139999827126); +#381852 = AXIS2_PLACEMENT_3D('',#381853,#381854,#381855); +#381853 = CARTESIAN_POINT('',(134.10999982712,-131.4200001728,1.55)); +#381854 = DIRECTION('',(0.,0.,-1.)); +#381855 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#381856 = ORIENTED_EDGE('',*,*,#381857,.F.); +#381857 = EDGE_CURVE('',#381858,#381849,#381860,.T.); +#381858 = VERTEX_POINT('',#381859); +#381859 = CARTESIAN_POINT('',(133.97,-131.42,1.51)); +#381860 = LINE('',#381861,#381862); +#381861 = CARTESIAN_POINT('',(133.97,-131.42,1.51)); +#381862 = VECTOR('',#381863,1.); +#381863 = DIRECTION('',(0.,0.,1.)); +#381864 = ORIENTED_EDGE('',*,*,#381865,.F.); +#381865 = EDGE_CURVE('',#381826,#381858,#381866,.T.); +#381866 = CIRCLE('',#381867,0.139999827126); +#381867 = AXIS2_PLACEMENT_3D('',#381868,#381869,#381870); +#381868 = CARTESIAN_POINT('',(134.10999982712,-131.4200001728,1.51)); +#381869 = DIRECTION('',(0.,0.,-1.)); +#381870 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#381871 = CYLINDRICAL_SURFACE('',#381872,0.139999827126); +#381872 = AXIS2_PLACEMENT_3D('',#381873,#381874,#381875); +#381873 = CARTESIAN_POINT('',(134.10999982712,-131.4200001728,1.51)); +#381874 = DIRECTION('',(0.,0.,-1.)); +#381875 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#381876 = ADVANCED_FACE('',(#381877),#381893,.T.); +#381877 = FACE_BOUND('',#381878,.T.); +#381878 = EDGE_LOOP('',(#381879,#381880,#381886,#381887)); +#381879 = ORIENTED_EDGE('',*,*,#381857,.T.); +#381880 = ORIENTED_EDGE('',*,*,#381881,.T.); +#381881 = EDGE_CURVE('',#381849,#381649,#381882,.T.); +#381882 = LINE('',#381883,#381884); +#381883 = CARTESIAN_POINT('',(133.97,-131.42,1.55)); +#381884 = VECTOR('',#381885,1.); +#381885 = DIRECTION('',(0.,1.,0.)); +#381886 = ORIENTED_EDGE('',*,*,#381646,.F.); +#381887 = ORIENTED_EDGE('',*,*,#381888,.F.); +#381888 = EDGE_CURVE('',#381858,#381647,#381889,.T.); +#381889 = LINE('',#381890,#381891); +#381890 = CARTESIAN_POINT('',(133.97,-131.42,1.51)); +#381891 = VECTOR('',#381892,1.); +#381892 = DIRECTION('',(0.,1.,0.)); +#381893 = PLANE('',#381894); +#381894 = AXIS2_PLACEMENT_3D('',#381895,#381896,#381897); +#381895 = CARTESIAN_POINT('',(133.97,-131.42,1.51)); +#381896 = DIRECTION('',(-1.,0.,0.)); +#381897 = DIRECTION('',(0.,1.,0.)); +#381898 = ADVANCED_FACE('',(#381899),#381909,.F.); +#381899 = FACE_BOUND('',#381900,.T.); +#381900 = EDGE_LOOP('',(#381901,#381902,#381903,#381904,#381905,#381906, + #381907,#381908)); +#381901 = ORIENTED_EDGE('',*,*,#381673,.T.); +#381902 = ORIENTED_EDGE('',*,*,#381705,.T.); +#381903 = ORIENTED_EDGE('',*,*,#381737,.T.); +#381904 = ORIENTED_EDGE('',*,*,#381769,.T.); +#381905 = ORIENTED_EDGE('',*,*,#381801,.T.); +#381906 = ORIENTED_EDGE('',*,*,#381833,.T.); +#381907 = ORIENTED_EDGE('',*,*,#381865,.T.); +#381908 = ORIENTED_EDGE('',*,*,#381888,.T.); +#381909 = PLANE('',#381910); +#381910 = AXIS2_PLACEMENT_3D('',#381911,#381912,#381913); +#381911 = CARTESIAN_POINT('',(0.,0.,1.51)); +#381912 = DIRECTION('',(0.,0.,1.)); +#381913 = DIRECTION('',(1.,0.,-0.)); +#381914 = ADVANCED_FACE('',(#381915),#381925,.T.); +#381915 = FACE_BOUND('',#381916,.F.); +#381916 = EDGE_LOOP('',(#381917,#381918,#381919,#381920,#381921,#381922, + #381923,#381924)); +#381917 = ORIENTED_EDGE('',*,*,#381656,.T.); +#381918 = ORIENTED_EDGE('',*,*,#381689,.T.); +#381919 = ORIENTED_EDGE('',*,*,#381720,.T.); +#381920 = ORIENTED_EDGE('',*,*,#381753,.T.); +#381921 = ORIENTED_EDGE('',*,*,#381784,.T.); +#381922 = ORIENTED_EDGE('',*,*,#381817,.T.); +#381923 = ORIENTED_EDGE('',*,*,#381848,.T.); +#381924 = ORIENTED_EDGE('',*,*,#381881,.T.); +#381925 = PLANE('',#381926); +#381926 = AXIS2_PLACEMENT_3D('',#381927,#381928,#381929); +#381927 = CARTESIAN_POINT('',(0.,0.,1.55)); +#381928 = DIRECTION('',(0.,0.,1.)); +#381929 = DIRECTION('',(1.,0.,-0.)); +#381930 = MANIFOLD_SOLID_BREP('',#381931); +#381931 = CLOSED_SHELL('',(#381932,#381974,#382005,#382038,#382069, + #382102,#382133,#382166,#382188,#382204)); +#381932 = ADVANCED_FACE('',(#381933),#381969,.T.); +#381933 = FACE_BOUND('',#381934,.T.); +#381934 = EDGE_LOOP('',(#381935,#381945,#381954,#381962)); +#381935 = ORIENTED_EDGE('',*,*,#381936,.T.); +#381936 = EDGE_CURVE('',#381937,#381939,#381941,.T.); +#381937 = VERTEX_POINT('',#381938); +#381938 = CARTESIAN_POINT('',(149.75,-120.75,1.51)); +#381939 = VERTEX_POINT('',#381940); +#381940 = CARTESIAN_POINT('',(149.75,-120.75,1.55)); +#381941 = LINE('',#381942,#381943); +#381942 = CARTESIAN_POINT('',(149.75,-120.75,1.51)); +#381943 = VECTOR('',#381944,1.); +#381944 = DIRECTION('',(0.,0.,1.)); +#381945 = ORIENTED_EDGE('',*,*,#381946,.T.); +#381946 = EDGE_CURVE('',#381939,#381947,#381949,.T.); +#381947 = VERTEX_POINT('',#381948); +#381948 = CARTESIAN_POINT('',(150.25,-120.25,1.55)); +#381949 = CIRCLE('',#381950,0.500001333575); +#381950 = AXIS2_PLACEMENT_3D('',#381951,#381952,#381953); +#381951 = CARTESIAN_POINT('',(150.25000133357,-120.7500013335,1.55)); +#381952 = DIRECTION('',(0.,0.,-1.)); +#381953 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381954 = ORIENTED_EDGE('',*,*,#381955,.F.); +#381955 = EDGE_CURVE('',#381956,#381947,#381958,.T.); +#381956 = VERTEX_POINT('',#381957); +#381957 = CARTESIAN_POINT('',(150.25,-120.25,1.51)); +#381958 = LINE('',#381959,#381960); +#381959 = CARTESIAN_POINT('',(150.25,-120.25,1.51)); +#381960 = VECTOR('',#381961,1.); +#381961 = DIRECTION('',(0.,0.,1.)); +#381962 = ORIENTED_EDGE('',*,*,#381963,.F.); +#381963 = EDGE_CURVE('',#381937,#381956,#381964,.T.); +#381964 = CIRCLE('',#381965,0.500001333575); +#381965 = AXIS2_PLACEMENT_3D('',#381966,#381967,#381968); +#381966 = CARTESIAN_POINT('',(150.25000133357,-120.7500013335,1.51)); +#381967 = DIRECTION('',(0.,0.,-1.)); +#381968 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381969 = CYLINDRICAL_SURFACE('',#381970,0.500001333575); +#381970 = AXIS2_PLACEMENT_3D('',#381971,#381972,#381973); +#381971 = CARTESIAN_POINT('',(150.25000133357,-120.7500013335,1.51)); +#381972 = DIRECTION('',(0.,0.,-1.)); +#381973 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#381974 = ADVANCED_FACE('',(#381975),#382000,.T.); +#381975 = FACE_BOUND('',#381976,.T.); +#381976 = EDGE_LOOP('',(#381977,#381978,#381986,#381994)); +#381977 = ORIENTED_EDGE('',*,*,#381955,.T.); +#381978 = ORIENTED_EDGE('',*,*,#381979,.T.); +#381979 = EDGE_CURVE('',#381947,#381980,#381982,.T.); +#381980 = VERTEX_POINT('',#381981); +#381981 = CARTESIAN_POINT('',(151.25,-120.25,1.55)); +#381982 = LINE('',#381983,#381984); +#381983 = CARTESIAN_POINT('',(150.25,-120.25,1.55)); +#381984 = VECTOR('',#381985,1.); +#381985 = DIRECTION('',(1.,0.,0.)); +#381986 = ORIENTED_EDGE('',*,*,#381987,.F.); +#381987 = EDGE_CURVE('',#381988,#381980,#381990,.T.); +#381988 = VERTEX_POINT('',#381989); +#381989 = CARTESIAN_POINT('',(151.25,-120.25,1.51)); +#381990 = LINE('',#381991,#381992); +#381991 = CARTESIAN_POINT('',(151.25,-120.25,1.51)); +#381992 = VECTOR('',#381993,1.); +#381993 = DIRECTION('',(0.,0.,1.)); +#381994 = ORIENTED_EDGE('',*,*,#381995,.F.); +#381995 = EDGE_CURVE('',#381956,#381988,#381996,.T.); +#381996 = LINE('',#381997,#381998); +#381997 = CARTESIAN_POINT('',(150.25,-120.25,1.51)); +#381998 = VECTOR('',#381999,1.); +#381999 = DIRECTION('',(1.,0.,0.)); +#382000 = PLANE('',#382001); +#382001 = AXIS2_PLACEMENT_3D('',#382002,#382003,#382004); +#382002 = CARTESIAN_POINT('',(150.25,-120.25,1.51)); +#382003 = DIRECTION('',(0.,1.,0.)); +#382004 = DIRECTION('',(1.,0.,0.)); +#382005 = ADVANCED_FACE('',(#382006),#382033,.T.); +#382006 = FACE_BOUND('',#382007,.T.); +#382007 = EDGE_LOOP('',(#382008,#382009,#382018,#382026)); +#382008 = ORIENTED_EDGE('',*,*,#381987,.T.); +#382009 = ORIENTED_EDGE('',*,*,#382010,.T.); +#382010 = EDGE_CURVE('',#381980,#382011,#382013,.T.); +#382011 = VERTEX_POINT('',#382012); +#382012 = CARTESIAN_POINT('',(151.75,-120.75,1.55)); +#382013 = CIRCLE('',#382014,0.500001333575); +#382014 = AXIS2_PLACEMENT_3D('',#382015,#382016,#382017); +#382015 = CARTESIAN_POINT('',(151.24999866642,-120.7500013335,1.55)); +#382016 = DIRECTION('',(0.,0.,-1.)); +#382017 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382018 = ORIENTED_EDGE('',*,*,#382019,.F.); +#382019 = EDGE_CURVE('',#382020,#382011,#382022,.T.); +#382020 = VERTEX_POINT('',#382021); +#382021 = CARTESIAN_POINT('',(151.75,-120.75,1.51)); +#382022 = LINE('',#382023,#382024); +#382023 = CARTESIAN_POINT('',(151.75,-120.75,1.51)); +#382024 = VECTOR('',#382025,1.); +#382025 = DIRECTION('',(0.,0.,1.)); +#382026 = ORIENTED_EDGE('',*,*,#382027,.F.); +#382027 = EDGE_CURVE('',#381988,#382020,#382028,.T.); +#382028 = CIRCLE('',#382029,0.500001333575); +#382029 = AXIS2_PLACEMENT_3D('',#382030,#382031,#382032); +#382030 = CARTESIAN_POINT('',(151.24999866642,-120.7500013335,1.51)); +#382031 = DIRECTION('',(0.,0.,-1.)); +#382032 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382033 = CYLINDRICAL_SURFACE('',#382034,0.500001333575); +#382034 = AXIS2_PLACEMENT_3D('',#382035,#382036,#382037); +#382035 = CARTESIAN_POINT('',(151.24999866642,-120.7500013335,1.51)); +#382036 = DIRECTION('',(0.,0.,-1.)); +#382037 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382038 = ADVANCED_FACE('',(#382039),#382064,.T.); +#382039 = FACE_BOUND('',#382040,.T.); +#382040 = EDGE_LOOP('',(#382041,#382042,#382050,#382058)); +#382041 = ORIENTED_EDGE('',*,*,#382019,.T.); +#382042 = ORIENTED_EDGE('',*,*,#382043,.T.); +#382043 = EDGE_CURVE('',#382011,#382044,#382046,.T.); +#382044 = VERTEX_POINT('',#382045); +#382045 = CARTESIAN_POINT('',(151.75,-121.75,1.55)); +#382046 = LINE('',#382047,#382048); +#382047 = CARTESIAN_POINT('',(151.75,-120.75,1.55)); +#382048 = VECTOR('',#382049,1.); +#382049 = DIRECTION('',(0.,-1.,0.)); +#382050 = ORIENTED_EDGE('',*,*,#382051,.F.); +#382051 = EDGE_CURVE('',#382052,#382044,#382054,.T.); +#382052 = VERTEX_POINT('',#382053); +#382053 = CARTESIAN_POINT('',(151.75,-121.75,1.51)); +#382054 = LINE('',#382055,#382056); +#382055 = CARTESIAN_POINT('',(151.75,-121.75,1.51)); +#382056 = VECTOR('',#382057,1.); +#382057 = DIRECTION('',(0.,0.,1.)); +#382058 = ORIENTED_EDGE('',*,*,#382059,.F.); +#382059 = EDGE_CURVE('',#382020,#382052,#382060,.T.); +#382060 = LINE('',#382061,#382062); +#382061 = CARTESIAN_POINT('',(151.75,-120.75,1.51)); +#382062 = VECTOR('',#382063,1.); +#382063 = DIRECTION('',(0.,-1.,0.)); +#382064 = PLANE('',#382065); +#382065 = AXIS2_PLACEMENT_3D('',#382066,#382067,#382068); +#382066 = CARTESIAN_POINT('',(151.75,-120.75,1.51)); +#382067 = DIRECTION('',(1.,0.,-0.)); +#382068 = DIRECTION('',(0.,-1.,0.)); +#382069 = ADVANCED_FACE('',(#382070),#382097,.T.); +#382070 = FACE_BOUND('',#382071,.T.); +#382071 = EDGE_LOOP('',(#382072,#382073,#382082,#382090)); +#382072 = ORIENTED_EDGE('',*,*,#382051,.T.); +#382073 = ORIENTED_EDGE('',*,*,#382074,.T.); +#382074 = EDGE_CURVE('',#382044,#382075,#382077,.T.); +#382075 = VERTEX_POINT('',#382076); +#382076 = CARTESIAN_POINT('',(151.25,-122.25,1.55)); +#382077 = CIRCLE('',#382078,0.500001333575); +#382078 = AXIS2_PLACEMENT_3D('',#382079,#382080,#382081); +#382079 = CARTESIAN_POINT('',(151.24999866642,-121.7499986664,1.55)); +#382080 = DIRECTION('',(0.,0.,-1.)); +#382081 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382082 = ORIENTED_EDGE('',*,*,#382083,.F.); +#382083 = EDGE_CURVE('',#382084,#382075,#382086,.T.); +#382084 = VERTEX_POINT('',#382085); +#382085 = CARTESIAN_POINT('',(151.25,-122.25,1.51)); +#382086 = LINE('',#382087,#382088); +#382087 = CARTESIAN_POINT('',(151.25,-122.25,1.51)); +#382088 = VECTOR('',#382089,1.); +#382089 = DIRECTION('',(0.,0.,1.)); +#382090 = ORIENTED_EDGE('',*,*,#382091,.F.); +#382091 = EDGE_CURVE('',#382052,#382084,#382092,.T.); +#382092 = CIRCLE('',#382093,0.500001333575); +#382093 = AXIS2_PLACEMENT_3D('',#382094,#382095,#382096); +#382094 = CARTESIAN_POINT('',(151.24999866642,-121.7499986664,1.51)); +#382095 = DIRECTION('',(0.,0.,-1.)); +#382096 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382097 = CYLINDRICAL_SURFACE('',#382098,0.500001333575); +#382098 = AXIS2_PLACEMENT_3D('',#382099,#382100,#382101); +#382099 = CARTESIAN_POINT('',(151.24999866642,-121.7499986664,1.51)); +#382100 = DIRECTION('',(0.,0.,-1.)); +#382101 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382102 = ADVANCED_FACE('',(#382103),#382128,.T.); +#382103 = FACE_BOUND('',#382104,.T.); +#382104 = EDGE_LOOP('',(#382105,#382106,#382114,#382122)); +#382105 = ORIENTED_EDGE('',*,*,#382083,.T.); +#382106 = ORIENTED_EDGE('',*,*,#382107,.T.); +#382107 = EDGE_CURVE('',#382075,#382108,#382110,.T.); +#382108 = VERTEX_POINT('',#382109); +#382109 = CARTESIAN_POINT('',(150.25,-122.25,1.55)); +#382110 = LINE('',#382111,#382112); +#382111 = CARTESIAN_POINT('',(151.25,-122.25,1.55)); +#382112 = VECTOR('',#382113,1.); +#382113 = DIRECTION('',(-1.,0.,0.)); +#382114 = ORIENTED_EDGE('',*,*,#382115,.F.); +#382115 = EDGE_CURVE('',#382116,#382108,#382118,.T.); +#382116 = VERTEX_POINT('',#382117); +#382117 = CARTESIAN_POINT('',(150.25,-122.25,1.51)); +#382118 = LINE('',#382119,#382120); +#382119 = CARTESIAN_POINT('',(150.25,-122.25,1.51)); +#382120 = VECTOR('',#382121,1.); +#382121 = DIRECTION('',(0.,0.,1.)); +#382122 = ORIENTED_EDGE('',*,*,#382123,.F.); +#382123 = EDGE_CURVE('',#382084,#382116,#382124,.T.); +#382124 = LINE('',#382125,#382126); +#382125 = CARTESIAN_POINT('',(151.25,-122.25,1.51)); +#382126 = VECTOR('',#382127,1.); +#382127 = DIRECTION('',(-1.,0.,0.)); +#382128 = PLANE('',#382129); +#382129 = AXIS2_PLACEMENT_3D('',#382130,#382131,#382132); +#382130 = CARTESIAN_POINT('',(151.25,-122.25,1.51)); +#382131 = DIRECTION('',(0.,-1.,0.)); +#382132 = DIRECTION('',(-1.,0.,0.)); +#382133 = ADVANCED_FACE('',(#382134),#382161,.T.); +#382134 = FACE_BOUND('',#382135,.T.); +#382135 = EDGE_LOOP('',(#382136,#382137,#382146,#382154)); +#382136 = ORIENTED_EDGE('',*,*,#382115,.T.); +#382137 = ORIENTED_EDGE('',*,*,#382138,.T.); +#382138 = EDGE_CURVE('',#382108,#382139,#382141,.T.); +#382139 = VERTEX_POINT('',#382140); +#382140 = CARTESIAN_POINT('',(149.75,-121.75,1.55)); +#382141 = CIRCLE('',#382142,0.500001333575); +#382142 = AXIS2_PLACEMENT_3D('',#382143,#382144,#382145); +#382143 = CARTESIAN_POINT('',(150.25000133357,-121.7499986664,1.55)); +#382144 = DIRECTION('',(0.,0.,-1.)); +#382145 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382146 = ORIENTED_EDGE('',*,*,#382147,.F.); +#382147 = EDGE_CURVE('',#382148,#382139,#382150,.T.); +#382148 = VERTEX_POINT('',#382149); +#382149 = CARTESIAN_POINT('',(149.75,-121.75,1.51)); +#382150 = LINE('',#382151,#382152); +#382151 = CARTESIAN_POINT('',(149.75,-121.75,1.51)); +#382152 = VECTOR('',#382153,1.); +#382153 = DIRECTION('',(0.,0.,1.)); +#382154 = ORIENTED_EDGE('',*,*,#382155,.F.); +#382155 = EDGE_CURVE('',#382116,#382148,#382156,.T.); +#382156 = CIRCLE('',#382157,0.500001333575); +#382157 = AXIS2_PLACEMENT_3D('',#382158,#382159,#382160); +#382158 = CARTESIAN_POINT('',(150.25000133357,-121.7499986664,1.51)); +#382159 = DIRECTION('',(0.,0.,-1.)); +#382160 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382161 = CYLINDRICAL_SURFACE('',#382162,0.500001333575); +#382162 = AXIS2_PLACEMENT_3D('',#382163,#382164,#382165); +#382163 = CARTESIAN_POINT('',(150.25000133357,-121.7499986664,1.51)); +#382164 = DIRECTION('',(0.,0.,-1.)); +#382165 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382166 = ADVANCED_FACE('',(#382167),#382183,.T.); +#382167 = FACE_BOUND('',#382168,.T.); +#382168 = EDGE_LOOP('',(#382169,#382170,#382176,#382177)); +#382169 = ORIENTED_EDGE('',*,*,#382147,.T.); +#382170 = ORIENTED_EDGE('',*,*,#382171,.T.); +#382171 = EDGE_CURVE('',#382139,#381939,#382172,.T.); +#382172 = LINE('',#382173,#382174); +#382173 = CARTESIAN_POINT('',(149.75,-121.75,1.55)); +#382174 = VECTOR('',#382175,1.); +#382175 = DIRECTION('',(0.,1.,0.)); +#382176 = ORIENTED_EDGE('',*,*,#381936,.F.); +#382177 = ORIENTED_EDGE('',*,*,#382178,.F.); +#382178 = EDGE_CURVE('',#382148,#381937,#382179,.T.); +#382179 = LINE('',#382180,#382181); +#382180 = CARTESIAN_POINT('',(149.75,-121.75,1.51)); +#382181 = VECTOR('',#382182,1.); +#382182 = DIRECTION('',(0.,1.,0.)); +#382183 = PLANE('',#382184); +#382184 = AXIS2_PLACEMENT_3D('',#382185,#382186,#382187); +#382185 = CARTESIAN_POINT('',(149.75,-121.75,1.51)); +#382186 = DIRECTION('',(-1.,0.,0.)); +#382187 = DIRECTION('',(0.,1.,0.)); +#382188 = ADVANCED_FACE('',(#382189),#382199,.F.); +#382189 = FACE_BOUND('',#382190,.T.); +#382190 = EDGE_LOOP('',(#382191,#382192,#382193,#382194,#382195,#382196, + #382197,#382198)); +#382191 = ORIENTED_EDGE('',*,*,#381963,.T.); +#382192 = ORIENTED_EDGE('',*,*,#381995,.T.); +#382193 = ORIENTED_EDGE('',*,*,#382027,.T.); +#382194 = ORIENTED_EDGE('',*,*,#382059,.T.); +#382195 = ORIENTED_EDGE('',*,*,#382091,.T.); +#382196 = ORIENTED_EDGE('',*,*,#382123,.T.); +#382197 = ORIENTED_EDGE('',*,*,#382155,.T.); +#382198 = ORIENTED_EDGE('',*,*,#382178,.T.); +#382199 = PLANE('',#382200); +#382200 = AXIS2_PLACEMENT_3D('',#382201,#382202,#382203); +#382201 = CARTESIAN_POINT('',(0.,0.,1.51)); +#382202 = DIRECTION('',(0.,0.,1.)); +#382203 = DIRECTION('',(1.,0.,-0.)); +#382204 = ADVANCED_FACE('',(#382205),#382215,.T.); +#382205 = FACE_BOUND('',#382206,.F.); +#382206 = EDGE_LOOP('',(#382207,#382208,#382209,#382210,#382211,#382212, + #382213,#382214)); +#382207 = ORIENTED_EDGE('',*,*,#381946,.T.); +#382208 = ORIENTED_EDGE('',*,*,#381979,.T.); +#382209 = ORIENTED_EDGE('',*,*,#382010,.T.); +#382210 = ORIENTED_EDGE('',*,*,#382043,.T.); +#382211 = ORIENTED_EDGE('',*,*,#382074,.T.); +#382212 = ORIENTED_EDGE('',*,*,#382107,.T.); +#382213 = ORIENTED_EDGE('',*,*,#382138,.T.); +#382214 = ORIENTED_EDGE('',*,*,#382171,.T.); +#382215 = PLANE('',#382216); +#382216 = AXIS2_PLACEMENT_3D('',#382217,#382218,#382219); +#382217 = CARTESIAN_POINT('',(0.,0.,1.55)); +#382218 = DIRECTION('',(0.,0.,1.)); +#382219 = DIRECTION('',(1.,0.,-0.)); +#382220 = MANIFOLD_SOLID_BREP('',#382221); +#382221 = CLOSED_SHELL('',(#382222,#382264,#382295,#382328,#382359, + #382392,#382423,#382456,#382478,#382494)); +#382222 = ADVANCED_FACE('',(#382223),#382259,.T.); +#382223 = FACE_BOUND('',#382224,.T.); +#382224 = EDGE_LOOP('',(#382225,#382235,#382244,#382252)); +#382225 = ORIENTED_EDGE('',*,*,#382226,.T.); +#382226 = EDGE_CURVE('',#382227,#382229,#382231,.T.); +#382227 = VERTEX_POINT('',#382228); +#382228 = CARTESIAN_POINT('',(150.19,-152.13,1.51)); +#382229 = VERTEX_POINT('',#382230); +#382230 = CARTESIAN_POINT('',(150.19,-152.13,1.55)); +#382231 = LINE('',#382232,#382233); +#382232 = CARTESIAN_POINT('',(150.19,-152.13,1.51)); +#382233 = VECTOR('',#382234,1.); +#382234 = DIRECTION('',(0.,0.,1.)); +#382235 = ORIENTED_EDGE('',*,*,#382236,.T.); +#382236 = EDGE_CURVE('',#382229,#382237,#382239,.T.); +#382237 = VERTEX_POINT('',#382238); +#382238 = CARTESIAN_POINT('',(150.33,-151.99,1.55)); +#382239 = CIRCLE('',#382240,0.139999827125); +#382240 = AXIS2_PLACEMENT_3D('',#382241,#382242,#382243); +#382241 = CARTESIAN_POINT('',(150.32999982712,-152.1299998271,1.55)); +#382242 = DIRECTION('',(0.,0.,-1.)); +#382243 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382244 = ORIENTED_EDGE('',*,*,#382245,.F.); +#382245 = EDGE_CURVE('',#382246,#382237,#382248,.T.); +#382246 = VERTEX_POINT('',#382247); +#382247 = CARTESIAN_POINT('',(150.33,-151.99,1.51)); +#382248 = LINE('',#382249,#382250); +#382249 = CARTESIAN_POINT('',(150.33,-151.99,1.51)); +#382250 = VECTOR('',#382251,1.); +#382251 = DIRECTION('',(0.,0.,1.)); +#382252 = ORIENTED_EDGE('',*,*,#382253,.F.); +#382253 = EDGE_CURVE('',#382227,#382246,#382254,.T.); +#382254 = CIRCLE('',#382255,0.139999827125); +#382255 = AXIS2_PLACEMENT_3D('',#382256,#382257,#382258); +#382256 = CARTESIAN_POINT('',(150.32999982712,-152.1299998271,1.51)); +#382257 = DIRECTION('',(0.,0.,-1.)); +#382258 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382259 = CYLINDRICAL_SURFACE('',#382260,0.139999827125); +#382260 = AXIS2_PLACEMENT_3D('',#382261,#382262,#382263); +#382261 = CARTESIAN_POINT('',(150.32999982712,-152.1299998271,1.51)); +#382262 = DIRECTION('',(0.,0.,-1.)); +#382263 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382264 = ADVANCED_FACE('',(#382265),#382290,.T.); +#382265 = FACE_BOUND('',#382266,.T.); +#382266 = EDGE_LOOP('',(#382267,#382268,#382276,#382284)); +#382267 = ORIENTED_EDGE('',*,*,#382245,.T.); +#382268 = ORIENTED_EDGE('',*,*,#382269,.T.); +#382269 = EDGE_CURVE('',#382237,#382270,#382272,.T.); +#382270 = VERTEX_POINT('',#382271); +#382271 = CARTESIAN_POINT('',(150.67,-151.99,1.55)); +#382272 = LINE('',#382273,#382274); +#382273 = CARTESIAN_POINT('',(150.33,-151.99,1.55)); +#382274 = VECTOR('',#382275,1.); +#382275 = DIRECTION('',(1.,0.,0.)); +#382276 = ORIENTED_EDGE('',*,*,#382277,.F.); +#382277 = EDGE_CURVE('',#382278,#382270,#382280,.T.); +#382278 = VERTEX_POINT('',#382279); +#382279 = CARTESIAN_POINT('',(150.67,-151.99,1.51)); +#382280 = LINE('',#382281,#382282); +#382281 = CARTESIAN_POINT('',(150.67,-151.99,1.51)); +#382282 = VECTOR('',#382283,1.); +#382283 = DIRECTION('',(0.,0.,1.)); +#382284 = ORIENTED_EDGE('',*,*,#382285,.F.); +#382285 = EDGE_CURVE('',#382246,#382278,#382286,.T.); +#382286 = LINE('',#382287,#382288); +#382287 = CARTESIAN_POINT('',(150.33,-151.99,1.51)); +#382288 = VECTOR('',#382289,1.); +#382289 = DIRECTION('',(1.,0.,0.)); +#382290 = PLANE('',#382291); +#382291 = AXIS2_PLACEMENT_3D('',#382292,#382293,#382294); +#382292 = CARTESIAN_POINT('',(150.33,-151.99,1.51)); +#382293 = DIRECTION('',(0.,1.,0.)); +#382294 = DIRECTION('',(1.,0.,0.)); +#382295 = ADVANCED_FACE('',(#382296),#382323,.T.); +#382296 = FACE_BOUND('',#382297,.T.); +#382297 = EDGE_LOOP('',(#382298,#382299,#382308,#382316)); +#382298 = ORIENTED_EDGE('',*,*,#382277,.T.); +#382299 = ORIENTED_EDGE('',*,*,#382300,.T.); +#382300 = EDGE_CURVE('',#382270,#382301,#382303,.T.); +#382301 = VERTEX_POINT('',#382302); +#382302 = CARTESIAN_POINT('',(150.81,-152.13,1.55)); +#382303 = CIRCLE('',#382304,0.139999827125); +#382304 = AXIS2_PLACEMENT_3D('',#382305,#382306,#382307); +#382305 = CARTESIAN_POINT('',(150.67000017287,-152.1299998271,1.55)); +#382306 = DIRECTION('',(0.,0.,-1.)); +#382307 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#382308 = ORIENTED_EDGE('',*,*,#382309,.F.); +#382309 = EDGE_CURVE('',#382310,#382301,#382312,.T.); +#382310 = VERTEX_POINT('',#382311); +#382311 = CARTESIAN_POINT('',(150.81,-152.13,1.51)); +#382312 = LINE('',#382313,#382314); +#382313 = CARTESIAN_POINT('',(150.81,-152.13,1.51)); +#382314 = VECTOR('',#382315,1.); +#382315 = DIRECTION('',(0.,0.,1.)); +#382316 = ORIENTED_EDGE('',*,*,#382317,.F.); +#382317 = EDGE_CURVE('',#382278,#382310,#382318,.T.); +#382318 = CIRCLE('',#382319,0.139999827125); +#382319 = AXIS2_PLACEMENT_3D('',#382320,#382321,#382322); +#382320 = CARTESIAN_POINT('',(150.67000017287,-152.1299998271,1.51)); +#382321 = DIRECTION('',(0.,0.,-1.)); +#382322 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#382323 = CYLINDRICAL_SURFACE('',#382324,0.139999827125); +#382324 = AXIS2_PLACEMENT_3D('',#382325,#382326,#382327); +#382325 = CARTESIAN_POINT('',(150.67000017287,-152.1299998271,1.51)); +#382326 = DIRECTION('',(0.,0.,-1.)); +#382327 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#382328 = ADVANCED_FACE('',(#382329),#382354,.T.); +#382329 = FACE_BOUND('',#382330,.T.); +#382330 = EDGE_LOOP('',(#382331,#382332,#382340,#382348)); +#382331 = ORIENTED_EDGE('',*,*,#382309,.T.); +#382332 = ORIENTED_EDGE('',*,*,#382333,.T.); +#382333 = EDGE_CURVE('',#382301,#382334,#382336,.T.); +#382334 = VERTEX_POINT('',#382335); +#382335 = CARTESIAN_POINT('',(150.81,-152.41,1.55)); +#382336 = LINE('',#382337,#382338); +#382337 = CARTESIAN_POINT('',(150.81,-152.13,1.55)); +#382338 = VECTOR('',#382339,1.); +#382339 = DIRECTION('',(0.,-1.,0.)); +#382340 = ORIENTED_EDGE('',*,*,#382341,.F.); +#382341 = EDGE_CURVE('',#382342,#382334,#382344,.T.); +#382342 = VERTEX_POINT('',#382343); +#382343 = CARTESIAN_POINT('',(150.81,-152.41,1.51)); +#382344 = LINE('',#382345,#382346); +#382345 = CARTESIAN_POINT('',(150.81,-152.41,1.51)); +#382346 = VECTOR('',#382347,1.); +#382347 = DIRECTION('',(0.,0.,1.)); +#382348 = ORIENTED_EDGE('',*,*,#382349,.F.); +#382349 = EDGE_CURVE('',#382310,#382342,#382350,.T.); +#382350 = LINE('',#382351,#382352); +#382351 = CARTESIAN_POINT('',(150.81,-152.13,1.51)); +#382352 = VECTOR('',#382353,1.); +#382353 = DIRECTION('',(0.,-1.,0.)); +#382354 = PLANE('',#382355); +#382355 = AXIS2_PLACEMENT_3D('',#382356,#382357,#382358); +#382356 = CARTESIAN_POINT('',(150.81,-152.13,1.51)); +#382357 = DIRECTION('',(1.,0.,-0.)); +#382358 = DIRECTION('',(0.,-1.,0.)); +#382359 = ADVANCED_FACE('',(#382360),#382387,.T.); +#382360 = FACE_BOUND('',#382361,.T.); +#382361 = EDGE_LOOP('',(#382362,#382363,#382372,#382380)); +#382362 = ORIENTED_EDGE('',*,*,#382341,.T.); +#382363 = ORIENTED_EDGE('',*,*,#382364,.T.); +#382364 = EDGE_CURVE('',#382334,#382365,#382367,.T.); +#382365 = VERTEX_POINT('',#382366); +#382366 = CARTESIAN_POINT('',(150.67,-152.55,1.55)); +#382367 = CIRCLE('',#382368,0.139999827125); +#382368 = AXIS2_PLACEMENT_3D('',#382369,#382370,#382371); +#382369 = CARTESIAN_POINT('',(150.67000017287,-152.4100001728,1.55)); +#382370 = DIRECTION('',(0.,0.,-1.)); +#382371 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382372 = ORIENTED_EDGE('',*,*,#382373,.F.); +#382373 = EDGE_CURVE('',#382374,#382365,#382376,.T.); +#382374 = VERTEX_POINT('',#382375); +#382375 = CARTESIAN_POINT('',(150.67,-152.55,1.51)); +#382376 = LINE('',#382377,#382378); +#382377 = CARTESIAN_POINT('',(150.67,-152.55,1.51)); +#382378 = VECTOR('',#382379,1.); +#382379 = DIRECTION('',(0.,0.,1.)); +#382380 = ORIENTED_EDGE('',*,*,#382381,.F.); +#382381 = EDGE_CURVE('',#382342,#382374,#382382,.T.); +#382382 = CIRCLE('',#382383,0.139999827125); +#382383 = AXIS2_PLACEMENT_3D('',#382384,#382385,#382386); +#382384 = CARTESIAN_POINT('',(150.67000017287,-152.4100001728,1.51)); +#382385 = DIRECTION('',(0.,0.,-1.)); +#382386 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382387 = CYLINDRICAL_SURFACE('',#382388,0.139999827125); +#382388 = AXIS2_PLACEMENT_3D('',#382389,#382390,#382391); +#382389 = CARTESIAN_POINT('',(150.67000017287,-152.4100001728,1.51)); +#382390 = DIRECTION('',(0.,0.,-1.)); +#382391 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382392 = ADVANCED_FACE('',(#382393),#382418,.T.); +#382393 = FACE_BOUND('',#382394,.T.); +#382394 = EDGE_LOOP('',(#382395,#382396,#382404,#382412)); +#382395 = ORIENTED_EDGE('',*,*,#382373,.T.); +#382396 = ORIENTED_EDGE('',*,*,#382397,.T.); +#382397 = EDGE_CURVE('',#382365,#382398,#382400,.T.); +#382398 = VERTEX_POINT('',#382399); +#382399 = CARTESIAN_POINT('',(150.33,-152.55,1.55)); +#382400 = LINE('',#382401,#382402); +#382401 = CARTESIAN_POINT('',(150.67,-152.55,1.55)); +#382402 = VECTOR('',#382403,1.); +#382403 = DIRECTION('',(-1.,0.,0.)); +#382404 = ORIENTED_EDGE('',*,*,#382405,.F.); +#382405 = EDGE_CURVE('',#382406,#382398,#382408,.T.); +#382406 = VERTEX_POINT('',#382407); +#382407 = CARTESIAN_POINT('',(150.33,-152.55,1.51)); +#382408 = LINE('',#382409,#382410); +#382409 = CARTESIAN_POINT('',(150.33,-152.55,1.51)); +#382410 = VECTOR('',#382411,1.); +#382411 = DIRECTION('',(0.,0.,1.)); +#382412 = ORIENTED_EDGE('',*,*,#382413,.F.); +#382413 = EDGE_CURVE('',#382374,#382406,#382414,.T.); +#382414 = LINE('',#382415,#382416); +#382415 = CARTESIAN_POINT('',(150.67,-152.55,1.51)); +#382416 = VECTOR('',#382417,1.); +#382417 = DIRECTION('',(-1.,0.,0.)); +#382418 = PLANE('',#382419); +#382419 = AXIS2_PLACEMENT_3D('',#382420,#382421,#382422); +#382420 = CARTESIAN_POINT('',(150.67,-152.55,1.51)); +#382421 = DIRECTION('',(0.,-1.,0.)); +#382422 = DIRECTION('',(-1.,0.,0.)); +#382423 = ADVANCED_FACE('',(#382424),#382451,.T.); +#382424 = FACE_BOUND('',#382425,.T.); +#382425 = EDGE_LOOP('',(#382426,#382427,#382436,#382444)); +#382426 = ORIENTED_EDGE('',*,*,#382405,.T.); +#382427 = ORIENTED_EDGE('',*,*,#382428,.T.); +#382428 = EDGE_CURVE('',#382398,#382429,#382431,.T.); +#382429 = VERTEX_POINT('',#382430); +#382430 = CARTESIAN_POINT('',(150.19,-152.41,1.55)); +#382431 = CIRCLE('',#382432,0.139999827125); +#382432 = AXIS2_PLACEMENT_3D('',#382433,#382434,#382435); +#382433 = CARTESIAN_POINT('',(150.32999982712,-152.4100001728,1.55)); +#382434 = DIRECTION('',(0.,0.,-1.)); +#382435 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#382436 = ORIENTED_EDGE('',*,*,#382437,.F.); +#382437 = EDGE_CURVE('',#382438,#382429,#382440,.T.); +#382438 = VERTEX_POINT('',#382439); +#382439 = CARTESIAN_POINT('',(150.19,-152.41,1.51)); +#382440 = LINE('',#382441,#382442); +#382441 = CARTESIAN_POINT('',(150.19,-152.41,1.51)); +#382442 = VECTOR('',#382443,1.); +#382443 = DIRECTION('',(0.,0.,1.)); +#382444 = ORIENTED_EDGE('',*,*,#382445,.F.); +#382445 = EDGE_CURVE('',#382406,#382438,#382446,.T.); +#382446 = CIRCLE('',#382447,0.139999827125); +#382447 = AXIS2_PLACEMENT_3D('',#382448,#382449,#382450); +#382448 = CARTESIAN_POINT('',(150.32999982712,-152.4100001728,1.51)); +#382449 = DIRECTION('',(0.,0.,-1.)); +#382450 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#382451 = CYLINDRICAL_SURFACE('',#382452,0.139999827125); +#382452 = AXIS2_PLACEMENT_3D('',#382453,#382454,#382455); +#382453 = CARTESIAN_POINT('',(150.32999982712,-152.4100001728,1.51)); +#382454 = DIRECTION('',(0.,0.,-1.)); +#382455 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#382456 = ADVANCED_FACE('',(#382457),#382473,.T.); +#382457 = FACE_BOUND('',#382458,.T.); +#382458 = EDGE_LOOP('',(#382459,#382460,#382466,#382467)); +#382459 = ORIENTED_EDGE('',*,*,#382437,.T.); +#382460 = ORIENTED_EDGE('',*,*,#382461,.T.); +#382461 = EDGE_CURVE('',#382429,#382229,#382462,.T.); +#382462 = LINE('',#382463,#382464); +#382463 = CARTESIAN_POINT('',(150.19,-152.41,1.55)); +#382464 = VECTOR('',#382465,1.); +#382465 = DIRECTION('',(0.,1.,0.)); +#382466 = ORIENTED_EDGE('',*,*,#382226,.F.); +#382467 = ORIENTED_EDGE('',*,*,#382468,.F.); +#382468 = EDGE_CURVE('',#382438,#382227,#382469,.T.); +#382469 = LINE('',#382470,#382471); +#382470 = CARTESIAN_POINT('',(150.19,-152.41,1.51)); +#382471 = VECTOR('',#382472,1.); +#382472 = DIRECTION('',(0.,1.,0.)); +#382473 = PLANE('',#382474); +#382474 = AXIS2_PLACEMENT_3D('',#382475,#382476,#382477); +#382475 = CARTESIAN_POINT('',(150.19,-152.41,1.51)); +#382476 = DIRECTION('',(-1.,0.,0.)); +#382477 = DIRECTION('',(0.,1.,0.)); +#382478 = ADVANCED_FACE('',(#382479),#382489,.F.); +#382479 = FACE_BOUND('',#382480,.T.); +#382480 = EDGE_LOOP('',(#382481,#382482,#382483,#382484,#382485,#382486, + #382487,#382488)); +#382481 = ORIENTED_EDGE('',*,*,#382253,.T.); +#382482 = ORIENTED_EDGE('',*,*,#382285,.T.); +#382483 = ORIENTED_EDGE('',*,*,#382317,.T.); +#382484 = ORIENTED_EDGE('',*,*,#382349,.T.); +#382485 = ORIENTED_EDGE('',*,*,#382381,.T.); +#382486 = ORIENTED_EDGE('',*,*,#382413,.T.); +#382487 = ORIENTED_EDGE('',*,*,#382445,.T.); +#382488 = ORIENTED_EDGE('',*,*,#382468,.T.); +#382489 = PLANE('',#382490); +#382490 = AXIS2_PLACEMENT_3D('',#382491,#382492,#382493); +#382491 = CARTESIAN_POINT('',(0.,0.,1.51)); +#382492 = DIRECTION('',(0.,0.,1.)); +#382493 = DIRECTION('',(1.,0.,-0.)); +#382494 = ADVANCED_FACE('',(#382495),#382505,.T.); +#382495 = FACE_BOUND('',#382496,.F.); +#382496 = EDGE_LOOP('',(#382497,#382498,#382499,#382500,#382501,#382502, + #382503,#382504)); +#382497 = ORIENTED_EDGE('',*,*,#382236,.T.); +#382498 = ORIENTED_EDGE('',*,*,#382269,.T.); +#382499 = ORIENTED_EDGE('',*,*,#382300,.T.); +#382500 = ORIENTED_EDGE('',*,*,#382333,.T.); +#382501 = ORIENTED_EDGE('',*,*,#382364,.T.); +#382502 = ORIENTED_EDGE('',*,*,#382397,.T.); +#382503 = ORIENTED_EDGE('',*,*,#382428,.T.); +#382504 = ORIENTED_EDGE('',*,*,#382461,.T.); +#382505 = PLANE('',#382506); +#382506 = AXIS2_PLACEMENT_3D('',#382507,#382508,#382509); +#382507 = CARTESIAN_POINT('',(0.,0.,1.55)); +#382508 = DIRECTION('',(0.,0.,1.)); +#382509 = DIRECTION('',(1.,0.,-0.)); +#382510 = MANIFOLD_SOLID_BREP('',#382511); +#382511 = CLOSED_SHELL('',(#382512,#382554,#382585,#382618,#382649, + #382682,#382713,#382746,#382768,#382784)); +#382512 = ADVANCED_FACE('',(#382513),#382549,.T.); +#382513 = FACE_BOUND('',#382514,.T.); +#382514 = EDGE_LOOP('',(#382515,#382525,#382534,#382542)); +#382515 = ORIENTED_EDGE('',*,*,#382516,.T.); +#382516 = EDGE_CURVE('',#382517,#382519,#382521,.T.); +#382517 = VERTEX_POINT('',#382518); +#382518 = CARTESIAN_POINT('',(149.75,-112.,1.51)); +#382519 = VERTEX_POINT('',#382520); +#382520 = CARTESIAN_POINT('',(149.75,-112.,1.55)); +#382521 = LINE('',#382522,#382523); +#382522 = CARTESIAN_POINT('',(149.75,-112.,1.51)); +#382523 = VECTOR('',#382524,1.); +#382524 = DIRECTION('',(0.,0.,1.)); +#382525 = ORIENTED_EDGE('',*,*,#382526,.T.); +#382526 = EDGE_CURVE('',#382519,#382527,#382529,.T.); +#382527 = VERTEX_POINT('',#382528); +#382528 = CARTESIAN_POINT('',(150.25,-111.5,1.55)); +#382529 = CIRCLE('',#382530,0.500001333575); +#382530 = AXIS2_PLACEMENT_3D('',#382531,#382532,#382533); +#382531 = CARTESIAN_POINT('',(150.25000133357,-112.0000013335,1.55)); +#382532 = DIRECTION('',(0.,0.,-1.)); +#382533 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#382534 = ORIENTED_EDGE('',*,*,#382535,.F.); +#382535 = EDGE_CURVE('',#382536,#382527,#382538,.T.); +#382536 = VERTEX_POINT('',#382537); +#382537 = CARTESIAN_POINT('',(150.25,-111.5,1.51)); +#382538 = LINE('',#382539,#382540); +#382539 = CARTESIAN_POINT('',(150.25,-111.5,1.51)); +#382540 = VECTOR('',#382541,1.); +#382541 = DIRECTION('',(0.,0.,1.)); +#382542 = ORIENTED_EDGE('',*,*,#382543,.F.); +#382543 = EDGE_CURVE('',#382517,#382536,#382544,.T.); +#382544 = CIRCLE('',#382545,0.500001333575); +#382545 = AXIS2_PLACEMENT_3D('',#382546,#382547,#382548); +#382546 = CARTESIAN_POINT('',(150.25000133357,-112.0000013335,1.51)); +#382547 = DIRECTION('',(0.,0.,-1.)); +#382548 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#382549 = CYLINDRICAL_SURFACE('',#382550,0.500001333575); +#382550 = AXIS2_PLACEMENT_3D('',#382551,#382552,#382553); +#382551 = CARTESIAN_POINT('',(150.25000133357,-112.0000013335,1.51)); +#382552 = DIRECTION('',(0.,0.,-1.)); +#382553 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#382554 = ADVANCED_FACE('',(#382555),#382580,.T.); +#382555 = FACE_BOUND('',#382556,.T.); +#382556 = EDGE_LOOP('',(#382557,#382558,#382566,#382574)); +#382557 = ORIENTED_EDGE('',*,*,#382535,.T.); +#382558 = ORIENTED_EDGE('',*,*,#382559,.T.); +#382559 = EDGE_CURVE('',#382527,#382560,#382562,.T.); +#382560 = VERTEX_POINT('',#382561); +#382561 = CARTESIAN_POINT('',(151.25,-111.5,1.55)); +#382562 = LINE('',#382563,#382564); +#382563 = CARTESIAN_POINT('',(150.25,-111.5,1.55)); +#382564 = VECTOR('',#382565,1.); +#382565 = DIRECTION('',(1.,0.,0.)); +#382566 = ORIENTED_EDGE('',*,*,#382567,.F.); +#382567 = EDGE_CURVE('',#382568,#382560,#382570,.T.); +#382568 = VERTEX_POINT('',#382569); +#382569 = CARTESIAN_POINT('',(151.25,-111.5,1.51)); +#382570 = LINE('',#382571,#382572); +#382571 = CARTESIAN_POINT('',(151.25,-111.5,1.51)); +#382572 = VECTOR('',#382573,1.); +#382573 = DIRECTION('',(0.,0.,1.)); +#382574 = ORIENTED_EDGE('',*,*,#382575,.F.); +#382575 = EDGE_CURVE('',#382536,#382568,#382576,.T.); +#382576 = LINE('',#382577,#382578); +#382577 = CARTESIAN_POINT('',(150.25,-111.5,1.51)); +#382578 = VECTOR('',#382579,1.); +#382579 = DIRECTION('',(1.,0.,0.)); +#382580 = PLANE('',#382581); +#382581 = AXIS2_PLACEMENT_3D('',#382582,#382583,#382584); +#382582 = CARTESIAN_POINT('',(150.25,-111.5,1.51)); +#382583 = DIRECTION('',(0.,1.,0.)); +#382584 = DIRECTION('',(1.,0.,0.)); +#382585 = ADVANCED_FACE('',(#382586),#382613,.T.); +#382586 = FACE_BOUND('',#382587,.T.); +#382587 = EDGE_LOOP('',(#382588,#382589,#382598,#382606)); +#382588 = ORIENTED_EDGE('',*,*,#382567,.T.); +#382589 = ORIENTED_EDGE('',*,*,#382590,.T.); +#382590 = EDGE_CURVE('',#382560,#382591,#382593,.T.); +#382591 = VERTEX_POINT('',#382592); +#382592 = CARTESIAN_POINT('',(151.75,-112.,1.55)); +#382593 = CIRCLE('',#382594,0.500001333575); +#382594 = AXIS2_PLACEMENT_3D('',#382595,#382596,#382597); +#382595 = CARTESIAN_POINT('',(151.24999866642,-112.0000013335,1.55)); +#382596 = DIRECTION('',(0.,0.,-1.)); +#382597 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382598 = ORIENTED_EDGE('',*,*,#382599,.F.); +#382599 = EDGE_CURVE('',#382600,#382591,#382602,.T.); +#382600 = VERTEX_POINT('',#382601); +#382601 = CARTESIAN_POINT('',(151.75,-112.,1.51)); +#382602 = LINE('',#382603,#382604); +#382603 = CARTESIAN_POINT('',(151.75,-112.,1.51)); +#382604 = VECTOR('',#382605,1.); +#382605 = DIRECTION('',(0.,0.,1.)); +#382606 = ORIENTED_EDGE('',*,*,#382607,.F.); +#382607 = EDGE_CURVE('',#382568,#382600,#382608,.T.); +#382608 = CIRCLE('',#382609,0.500001333575); +#382609 = AXIS2_PLACEMENT_3D('',#382610,#382611,#382612); +#382610 = CARTESIAN_POINT('',(151.24999866642,-112.0000013335,1.51)); +#382611 = DIRECTION('',(0.,0.,-1.)); +#382612 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382613 = CYLINDRICAL_SURFACE('',#382614,0.500001333575); +#382614 = AXIS2_PLACEMENT_3D('',#382615,#382616,#382617); +#382615 = CARTESIAN_POINT('',(151.24999866642,-112.0000013335,1.51)); +#382616 = DIRECTION('',(0.,0.,-1.)); +#382617 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#382618 = ADVANCED_FACE('',(#382619),#382644,.T.); +#382619 = FACE_BOUND('',#382620,.T.); +#382620 = EDGE_LOOP('',(#382621,#382622,#382630,#382638)); +#382621 = ORIENTED_EDGE('',*,*,#382599,.T.); +#382622 = ORIENTED_EDGE('',*,*,#382623,.T.); +#382623 = EDGE_CURVE('',#382591,#382624,#382626,.T.); +#382624 = VERTEX_POINT('',#382625); +#382625 = CARTESIAN_POINT('',(151.75,-113.,1.55)); +#382626 = LINE('',#382627,#382628); +#382627 = CARTESIAN_POINT('',(151.75,-112.,1.55)); +#382628 = VECTOR('',#382629,1.); +#382629 = DIRECTION('',(0.,-1.,0.)); +#382630 = ORIENTED_EDGE('',*,*,#382631,.F.); +#382631 = EDGE_CURVE('',#382632,#382624,#382634,.T.); +#382632 = VERTEX_POINT('',#382633); +#382633 = CARTESIAN_POINT('',(151.75,-113.,1.51)); +#382634 = LINE('',#382635,#382636); +#382635 = CARTESIAN_POINT('',(151.75,-113.,1.51)); +#382636 = VECTOR('',#382637,1.); +#382637 = DIRECTION('',(0.,0.,1.)); +#382638 = ORIENTED_EDGE('',*,*,#382639,.F.); +#382639 = EDGE_CURVE('',#382600,#382632,#382640,.T.); +#382640 = LINE('',#382641,#382642); +#382641 = CARTESIAN_POINT('',(151.75,-112.,1.51)); +#382642 = VECTOR('',#382643,1.); +#382643 = DIRECTION('',(0.,-1.,0.)); +#382644 = PLANE('',#382645); +#382645 = AXIS2_PLACEMENT_3D('',#382646,#382647,#382648); +#382646 = CARTESIAN_POINT('',(151.75,-112.,1.51)); +#382647 = DIRECTION('',(1.,0.,-0.)); +#382648 = DIRECTION('',(0.,-1.,0.)); +#382649 = ADVANCED_FACE('',(#382650),#382677,.T.); +#382650 = FACE_BOUND('',#382651,.T.); +#382651 = EDGE_LOOP('',(#382652,#382653,#382662,#382670)); +#382652 = ORIENTED_EDGE('',*,*,#382631,.T.); +#382653 = ORIENTED_EDGE('',*,*,#382654,.T.); +#382654 = EDGE_CURVE('',#382624,#382655,#382657,.T.); +#382655 = VERTEX_POINT('',#382656); +#382656 = CARTESIAN_POINT('',(151.25,-113.5,1.55)); +#382657 = CIRCLE('',#382658,0.500001333575); +#382658 = AXIS2_PLACEMENT_3D('',#382659,#382660,#382661); +#382659 = CARTESIAN_POINT('',(151.24999866642,-112.9999986664,1.55)); +#382660 = DIRECTION('',(0.,0.,-1.)); +#382661 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382662 = ORIENTED_EDGE('',*,*,#382663,.F.); +#382663 = EDGE_CURVE('',#382664,#382655,#382666,.T.); +#382664 = VERTEX_POINT('',#382665); +#382665 = CARTESIAN_POINT('',(151.25,-113.5,1.51)); +#382666 = LINE('',#382667,#382668); +#382667 = CARTESIAN_POINT('',(151.25,-113.5,1.51)); +#382668 = VECTOR('',#382669,1.); +#382669 = DIRECTION('',(0.,0.,1.)); +#382670 = ORIENTED_EDGE('',*,*,#382671,.F.); +#382671 = EDGE_CURVE('',#382632,#382664,#382672,.T.); +#382672 = CIRCLE('',#382673,0.500001333575); +#382673 = AXIS2_PLACEMENT_3D('',#382674,#382675,#382676); +#382674 = CARTESIAN_POINT('',(151.24999866642,-112.9999986664,1.51)); +#382675 = DIRECTION('',(0.,0.,-1.)); +#382676 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382677 = CYLINDRICAL_SURFACE('',#382678,0.500001333575); +#382678 = AXIS2_PLACEMENT_3D('',#382679,#382680,#382681); +#382679 = CARTESIAN_POINT('',(151.24999866642,-112.9999986664,1.51)); +#382680 = DIRECTION('',(0.,0.,-1.)); +#382681 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#382682 = ADVANCED_FACE('',(#382683),#382708,.T.); +#382683 = FACE_BOUND('',#382684,.T.); +#382684 = EDGE_LOOP('',(#382685,#382686,#382694,#382702)); +#382685 = ORIENTED_EDGE('',*,*,#382663,.T.); +#382686 = ORIENTED_EDGE('',*,*,#382687,.T.); +#382687 = EDGE_CURVE('',#382655,#382688,#382690,.T.); +#382688 = VERTEX_POINT('',#382689); +#382689 = CARTESIAN_POINT('',(150.25,-113.5,1.55)); +#382690 = LINE('',#382691,#382692); +#382691 = CARTESIAN_POINT('',(151.25,-113.5,1.55)); +#382692 = VECTOR('',#382693,1.); +#382693 = DIRECTION('',(-1.,0.,0.)); +#382694 = ORIENTED_EDGE('',*,*,#382695,.F.); +#382695 = EDGE_CURVE('',#382696,#382688,#382698,.T.); +#382696 = VERTEX_POINT('',#382697); +#382697 = CARTESIAN_POINT('',(150.25,-113.5,1.51)); +#382698 = LINE('',#382699,#382700); +#382699 = CARTESIAN_POINT('',(150.25,-113.5,1.51)); +#382700 = VECTOR('',#382701,1.); +#382701 = DIRECTION('',(0.,0.,1.)); +#382702 = ORIENTED_EDGE('',*,*,#382703,.F.); +#382703 = EDGE_CURVE('',#382664,#382696,#382704,.T.); +#382704 = LINE('',#382705,#382706); +#382705 = CARTESIAN_POINT('',(151.25,-113.5,1.51)); +#382706 = VECTOR('',#382707,1.); +#382707 = DIRECTION('',(-1.,0.,0.)); +#382708 = PLANE('',#382709); +#382709 = AXIS2_PLACEMENT_3D('',#382710,#382711,#382712); +#382710 = CARTESIAN_POINT('',(151.25,-113.5,1.51)); +#382711 = DIRECTION('',(0.,-1.,0.)); +#382712 = DIRECTION('',(-1.,0.,0.)); +#382713 = ADVANCED_FACE('',(#382714),#382741,.T.); +#382714 = FACE_BOUND('',#382715,.T.); +#382715 = EDGE_LOOP('',(#382716,#382717,#382726,#382734)); +#382716 = ORIENTED_EDGE('',*,*,#382695,.T.); +#382717 = ORIENTED_EDGE('',*,*,#382718,.T.); +#382718 = EDGE_CURVE('',#382688,#382719,#382721,.T.); +#382719 = VERTEX_POINT('',#382720); +#382720 = CARTESIAN_POINT('',(149.75,-113.,1.55)); +#382721 = CIRCLE('',#382722,0.500001333575); +#382722 = AXIS2_PLACEMENT_3D('',#382723,#382724,#382725); +#382723 = CARTESIAN_POINT('',(150.25000133357,-112.9999986664,1.55)); +#382724 = DIRECTION('',(0.,0.,-1.)); +#382725 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382726 = ORIENTED_EDGE('',*,*,#382727,.F.); +#382727 = EDGE_CURVE('',#382728,#382719,#382730,.T.); +#382728 = VERTEX_POINT('',#382729); +#382729 = CARTESIAN_POINT('',(149.75,-113.,1.51)); +#382730 = LINE('',#382731,#382732); +#382731 = CARTESIAN_POINT('',(149.75,-113.,1.51)); +#382732 = VECTOR('',#382733,1.); +#382733 = DIRECTION('',(0.,0.,1.)); +#382734 = ORIENTED_EDGE('',*,*,#382735,.F.); +#382735 = EDGE_CURVE('',#382696,#382728,#382736,.T.); +#382736 = CIRCLE('',#382737,0.500001333575); +#382737 = AXIS2_PLACEMENT_3D('',#382738,#382739,#382740); +#382738 = CARTESIAN_POINT('',(150.25000133357,-112.9999986664,1.51)); +#382739 = DIRECTION('',(0.,0.,-1.)); +#382740 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382741 = CYLINDRICAL_SURFACE('',#382742,0.500001333575); +#382742 = AXIS2_PLACEMENT_3D('',#382743,#382744,#382745); +#382743 = CARTESIAN_POINT('',(150.25000133357,-112.9999986664,1.51)); +#382744 = DIRECTION('',(0.,0.,-1.)); +#382745 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#382746 = ADVANCED_FACE('',(#382747),#382763,.T.); +#382747 = FACE_BOUND('',#382748,.T.); +#382748 = EDGE_LOOP('',(#382749,#382750,#382756,#382757)); +#382749 = ORIENTED_EDGE('',*,*,#382727,.T.); +#382750 = ORIENTED_EDGE('',*,*,#382751,.T.); +#382751 = EDGE_CURVE('',#382719,#382519,#382752,.T.); +#382752 = LINE('',#382753,#382754); +#382753 = CARTESIAN_POINT('',(149.75,-113.,1.55)); +#382754 = VECTOR('',#382755,1.); +#382755 = DIRECTION('',(0.,1.,0.)); +#382756 = ORIENTED_EDGE('',*,*,#382516,.F.); +#382757 = ORIENTED_EDGE('',*,*,#382758,.F.); +#382758 = EDGE_CURVE('',#382728,#382517,#382759,.T.); +#382759 = LINE('',#382760,#382761); +#382760 = CARTESIAN_POINT('',(149.75,-113.,1.51)); +#382761 = VECTOR('',#382762,1.); +#382762 = DIRECTION('',(0.,1.,0.)); +#382763 = PLANE('',#382764); +#382764 = AXIS2_PLACEMENT_3D('',#382765,#382766,#382767); +#382765 = CARTESIAN_POINT('',(149.75,-113.,1.51)); +#382766 = DIRECTION('',(-1.,0.,0.)); +#382767 = DIRECTION('',(0.,1.,0.)); +#382768 = ADVANCED_FACE('',(#382769),#382779,.F.); +#382769 = FACE_BOUND('',#382770,.T.); +#382770 = EDGE_LOOP('',(#382771,#382772,#382773,#382774,#382775,#382776, + #382777,#382778)); +#382771 = ORIENTED_EDGE('',*,*,#382543,.T.); +#382772 = ORIENTED_EDGE('',*,*,#382575,.T.); +#382773 = ORIENTED_EDGE('',*,*,#382607,.T.); +#382774 = ORIENTED_EDGE('',*,*,#382639,.T.); +#382775 = ORIENTED_EDGE('',*,*,#382671,.T.); +#382776 = ORIENTED_EDGE('',*,*,#382703,.T.); +#382777 = ORIENTED_EDGE('',*,*,#382735,.T.); +#382778 = ORIENTED_EDGE('',*,*,#382758,.T.); +#382779 = PLANE('',#382780); +#382780 = AXIS2_PLACEMENT_3D('',#382781,#382782,#382783); +#382781 = CARTESIAN_POINT('',(0.,0.,1.51)); +#382782 = DIRECTION('',(0.,0.,1.)); +#382783 = DIRECTION('',(1.,0.,-0.)); +#382784 = ADVANCED_FACE('',(#382785),#382795,.T.); +#382785 = FACE_BOUND('',#382786,.F.); +#382786 = EDGE_LOOP('',(#382787,#382788,#382789,#382790,#382791,#382792, + #382793,#382794)); +#382787 = ORIENTED_EDGE('',*,*,#382526,.T.); +#382788 = ORIENTED_EDGE('',*,*,#382559,.T.); +#382789 = ORIENTED_EDGE('',*,*,#382590,.T.); +#382790 = ORIENTED_EDGE('',*,*,#382623,.T.); +#382791 = ORIENTED_EDGE('',*,*,#382654,.T.); +#382792 = ORIENTED_EDGE('',*,*,#382687,.T.); +#382793 = ORIENTED_EDGE('',*,*,#382718,.T.); +#382794 = ORIENTED_EDGE('',*,*,#382751,.T.); +#382795 = PLANE('',#382796); +#382796 = AXIS2_PLACEMENT_3D('',#382797,#382798,#382799); +#382797 = CARTESIAN_POINT('',(0.,0.,1.55)); +#382798 = DIRECTION('',(0.,0.,1.)); +#382799 = DIRECTION('',(1.,0.,-0.)); +#382800 = MANIFOLD_SOLID_BREP('',#382801); +#382801 = CLOSED_SHELL('',(#382802,#382844,#382875,#382908,#382939, + #382972,#383003,#383036,#383058,#383074)); +#382802 = ADVANCED_FACE('',(#382803),#382839,.T.); +#382803 = FACE_BOUND('',#382804,.T.); +#382804 = EDGE_LOOP('',(#382805,#382815,#382824,#382832)); +#382805 = ORIENTED_EDGE('',*,*,#382806,.T.); +#382806 = EDGE_CURVE('',#382807,#382809,#382811,.T.); +#382807 = VERTEX_POINT('',#382808); +#382808 = CARTESIAN_POINT('',(140.69,-129.84,1.51)); +#382809 = VERTEX_POINT('',#382810); +#382810 = CARTESIAN_POINT('',(140.69,-129.84,1.55)); +#382811 = LINE('',#382812,#382813); +#382812 = CARTESIAN_POINT('',(140.69,-129.84,1.51)); +#382813 = VECTOR('',#382814,1.); +#382814 = DIRECTION('',(0.,0.,1.)); +#382815 = ORIENTED_EDGE('',*,*,#382816,.T.); +#382816 = EDGE_CURVE('',#382809,#382817,#382819,.T.); +#382817 = VERTEX_POINT('',#382818); +#382818 = CARTESIAN_POINT('',(140.83,-129.7,1.55)); +#382819 = CIRCLE('',#382820,0.139999827125); +#382820 = AXIS2_PLACEMENT_3D('',#382821,#382822,#382823); +#382821 = CARTESIAN_POINT('',(140.82999982712,-129.8399998271,1.55)); +#382822 = DIRECTION('',(0.,0.,-1.)); +#382823 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382824 = ORIENTED_EDGE('',*,*,#382825,.F.); +#382825 = EDGE_CURVE('',#382826,#382817,#382828,.T.); +#382826 = VERTEX_POINT('',#382827); +#382827 = CARTESIAN_POINT('',(140.83,-129.7,1.51)); +#382828 = LINE('',#382829,#382830); +#382829 = CARTESIAN_POINT('',(140.83,-129.7,1.51)); +#382830 = VECTOR('',#382831,1.); +#382831 = DIRECTION('',(0.,0.,1.)); +#382832 = ORIENTED_EDGE('',*,*,#382833,.F.); +#382833 = EDGE_CURVE('',#382807,#382826,#382834,.T.); +#382834 = CIRCLE('',#382835,0.139999827125); +#382835 = AXIS2_PLACEMENT_3D('',#382836,#382837,#382838); +#382836 = CARTESIAN_POINT('',(140.82999982712,-129.8399998271,1.51)); +#382837 = DIRECTION('',(0.,0.,-1.)); +#382838 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382839 = CYLINDRICAL_SURFACE('',#382840,0.139999827125); +#382840 = AXIS2_PLACEMENT_3D('',#382841,#382842,#382843); +#382841 = CARTESIAN_POINT('',(140.82999982712,-129.8399998271,1.51)); +#382842 = DIRECTION('',(0.,0.,-1.)); +#382843 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#382844 = ADVANCED_FACE('',(#382845),#382870,.T.); +#382845 = FACE_BOUND('',#382846,.T.); +#382846 = EDGE_LOOP('',(#382847,#382848,#382856,#382864)); +#382847 = ORIENTED_EDGE('',*,*,#382825,.T.); +#382848 = ORIENTED_EDGE('',*,*,#382849,.T.); +#382849 = EDGE_CURVE('',#382817,#382850,#382852,.T.); +#382850 = VERTEX_POINT('',#382851); +#382851 = CARTESIAN_POINT('',(141.17,-129.7,1.55)); +#382852 = LINE('',#382853,#382854); +#382853 = CARTESIAN_POINT('',(140.83,-129.7,1.55)); +#382854 = VECTOR('',#382855,1.); +#382855 = DIRECTION('',(1.,0.,0.)); +#382856 = ORIENTED_EDGE('',*,*,#382857,.F.); +#382857 = EDGE_CURVE('',#382858,#382850,#382860,.T.); +#382858 = VERTEX_POINT('',#382859); +#382859 = CARTESIAN_POINT('',(141.17,-129.7,1.51)); +#382860 = LINE('',#382861,#382862); +#382861 = CARTESIAN_POINT('',(141.17,-129.7,1.51)); +#382862 = VECTOR('',#382863,1.); +#382863 = DIRECTION('',(0.,0.,1.)); +#382864 = ORIENTED_EDGE('',*,*,#382865,.F.); +#382865 = EDGE_CURVE('',#382826,#382858,#382866,.T.); +#382866 = LINE('',#382867,#382868); +#382867 = CARTESIAN_POINT('',(140.83,-129.7,1.51)); +#382868 = VECTOR('',#382869,1.); +#382869 = DIRECTION('',(1.,0.,0.)); +#382870 = PLANE('',#382871); +#382871 = AXIS2_PLACEMENT_3D('',#382872,#382873,#382874); +#382872 = CARTESIAN_POINT('',(140.83,-129.7,1.51)); +#382873 = DIRECTION('',(0.,1.,0.)); +#382874 = DIRECTION('',(1.,0.,0.)); +#382875 = ADVANCED_FACE('',(#382876),#382903,.T.); +#382876 = FACE_BOUND('',#382877,.T.); +#382877 = EDGE_LOOP('',(#382878,#382879,#382888,#382896)); +#382878 = ORIENTED_EDGE('',*,*,#382857,.T.); +#382879 = ORIENTED_EDGE('',*,*,#382880,.T.); +#382880 = EDGE_CURVE('',#382850,#382881,#382883,.T.); +#382881 = VERTEX_POINT('',#382882); +#382882 = CARTESIAN_POINT('',(141.31,-129.84,1.55)); +#382883 = CIRCLE('',#382884,0.139999827125); +#382884 = AXIS2_PLACEMENT_3D('',#382885,#382886,#382887); +#382885 = CARTESIAN_POINT('',(141.17000017287,-129.8399998271,1.55)); +#382886 = DIRECTION('',(0.,0.,-1.)); +#382887 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#382888 = ORIENTED_EDGE('',*,*,#382889,.F.); +#382889 = EDGE_CURVE('',#382890,#382881,#382892,.T.); +#382890 = VERTEX_POINT('',#382891); +#382891 = CARTESIAN_POINT('',(141.31,-129.84,1.51)); +#382892 = LINE('',#382893,#382894); +#382893 = CARTESIAN_POINT('',(141.31,-129.84,1.51)); +#382894 = VECTOR('',#382895,1.); +#382895 = DIRECTION('',(0.,0.,1.)); +#382896 = ORIENTED_EDGE('',*,*,#382897,.F.); +#382897 = EDGE_CURVE('',#382858,#382890,#382898,.T.); +#382898 = CIRCLE('',#382899,0.139999827125); +#382899 = AXIS2_PLACEMENT_3D('',#382900,#382901,#382902); +#382900 = CARTESIAN_POINT('',(141.17000017287,-129.8399998271,1.51)); +#382901 = DIRECTION('',(0.,0.,-1.)); +#382902 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#382903 = CYLINDRICAL_SURFACE('',#382904,0.139999827125); +#382904 = AXIS2_PLACEMENT_3D('',#382905,#382906,#382907); +#382905 = CARTESIAN_POINT('',(141.17000017287,-129.8399998271,1.51)); +#382906 = DIRECTION('',(0.,0.,-1.)); +#382907 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#382908 = ADVANCED_FACE('',(#382909),#382934,.T.); +#382909 = FACE_BOUND('',#382910,.T.); +#382910 = EDGE_LOOP('',(#382911,#382912,#382920,#382928)); +#382911 = ORIENTED_EDGE('',*,*,#382889,.T.); +#382912 = ORIENTED_EDGE('',*,*,#382913,.T.); +#382913 = EDGE_CURVE('',#382881,#382914,#382916,.T.); +#382914 = VERTEX_POINT('',#382915); +#382915 = CARTESIAN_POINT('',(141.31,-130.12,1.55)); +#382916 = LINE('',#382917,#382918); +#382917 = CARTESIAN_POINT('',(141.31,-129.84,1.55)); +#382918 = VECTOR('',#382919,1.); +#382919 = DIRECTION('',(0.,-1.,0.)); +#382920 = ORIENTED_EDGE('',*,*,#382921,.F.); +#382921 = EDGE_CURVE('',#382922,#382914,#382924,.T.); +#382922 = VERTEX_POINT('',#382923); +#382923 = CARTESIAN_POINT('',(141.31,-130.12,1.51)); +#382924 = LINE('',#382925,#382926); +#382925 = CARTESIAN_POINT('',(141.31,-130.12,1.51)); +#382926 = VECTOR('',#382927,1.); +#382927 = DIRECTION('',(0.,0.,1.)); +#382928 = ORIENTED_EDGE('',*,*,#382929,.F.); +#382929 = EDGE_CURVE('',#382890,#382922,#382930,.T.); +#382930 = LINE('',#382931,#382932); +#382931 = CARTESIAN_POINT('',(141.31,-129.84,1.51)); +#382932 = VECTOR('',#382933,1.); +#382933 = DIRECTION('',(0.,-1.,0.)); +#382934 = PLANE('',#382935); +#382935 = AXIS2_PLACEMENT_3D('',#382936,#382937,#382938); +#382936 = CARTESIAN_POINT('',(141.31,-129.84,1.51)); +#382937 = DIRECTION('',(1.,0.,-0.)); +#382938 = DIRECTION('',(0.,-1.,0.)); +#382939 = ADVANCED_FACE('',(#382940),#382967,.T.); +#382940 = FACE_BOUND('',#382941,.T.); +#382941 = EDGE_LOOP('',(#382942,#382943,#382952,#382960)); +#382942 = ORIENTED_EDGE('',*,*,#382921,.T.); +#382943 = ORIENTED_EDGE('',*,*,#382944,.T.); +#382944 = EDGE_CURVE('',#382914,#382945,#382947,.T.); +#382945 = VERTEX_POINT('',#382946); +#382946 = CARTESIAN_POINT('',(141.17,-130.26,1.55)); +#382947 = CIRCLE('',#382948,0.139999827125); +#382948 = AXIS2_PLACEMENT_3D('',#382949,#382950,#382951); +#382949 = CARTESIAN_POINT('',(141.17000017287,-130.1200001728,1.55)); +#382950 = DIRECTION('',(0.,0.,-1.)); +#382951 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382952 = ORIENTED_EDGE('',*,*,#382953,.F.); +#382953 = EDGE_CURVE('',#382954,#382945,#382956,.T.); +#382954 = VERTEX_POINT('',#382955); +#382955 = CARTESIAN_POINT('',(141.17,-130.26,1.51)); +#382956 = LINE('',#382957,#382958); +#382957 = CARTESIAN_POINT('',(141.17,-130.26,1.51)); +#382958 = VECTOR('',#382959,1.); +#382959 = DIRECTION('',(0.,0.,1.)); +#382960 = ORIENTED_EDGE('',*,*,#382961,.F.); +#382961 = EDGE_CURVE('',#382922,#382954,#382962,.T.); +#382962 = CIRCLE('',#382963,0.139999827125); +#382963 = AXIS2_PLACEMENT_3D('',#382964,#382965,#382966); +#382964 = CARTESIAN_POINT('',(141.17000017287,-130.1200001728,1.51)); +#382965 = DIRECTION('',(0.,0.,-1.)); +#382966 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382967 = CYLINDRICAL_SURFACE('',#382968,0.139999827125); +#382968 = AXIS2_PLACEMENT_3D('',#382969,#382970,#382971); +#382969 = CARTESIAN_POINT('',(141.17000017287,-130.1200001728,1.51)); +#382970 = DIRECTION('',(0.,0.,-1.)); +#382971 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#382972 = ADVANCED_FACE('',(#382973),#382998,.T.); +#382973 = FACE_BOUND('',#382974,.T.); +#382974 = EDGE_LOOP('',(#382975,#382976,#382984,#382992)); +#382975 = ORIENTED_EDGE('',*,*,#382953,.T.); +#382976 = ORIENTED_EDGE('',*,*,#382977,.T.); +#382977 = EDGE_CURVE('',#382945,#382978,#382980,.T.); +#382978 = VERTEX_POINT('',#382979); +#382979 = CARTESIAN_POINT('',(140.83,-130.26,1.55)); +#382980 = LINE('',#382981,#382982); +#382981 = CARTESIAN_POINT('',(141.17,-130.26,1.55)); +#382982 = VECTOR('',#382983,1.); +#382983 = DIRECTION('',(-1.,0.,0.)); +#382984 = ORIENTED_EDGE('',*,*,#382985,.F.); +#382985 = EDGE_CURVE('',#382986,#382978,#382988,.T.); +#382986 = VERTEX_POINT('',#382987); +#382987 = CARTESIAN_POINT('',(140.83,-130.26,1.51)); +#382988 = LINE('',#382989,#382990); +#382989 = CARTESIAN_POINT('',(140.83,-130.26,1.51)); +#382990 = VECTOR('',#382991,1.); +#382991 = DIRECTION('',(0.,0.,1.)); +#382992 = ORIENTED_EDGE('',*,*,#382993,.F.); +#382993 = EDGE_CURVE('',#382954,#382986,#382994,.T.); +#382994 = LINE('',#382995,#382996); +#382995 = CARTESIAN_POINT('',(141.17,-130.26,1.51)); +#382996 = VECTOR('',#382997,1.); +#382997 = DIRECTION('',(-1.,0.,0.)); +#382998 = PLANE('',#382999); +#382999 = AXIS2_PLACEMENT_3D('',#383000,#383001,#383002); +#383000 = CARTESIAN_POINT('',(141.17,-130.26,1.51)); +#383001 = DIRECTION('',(0.,-1.,0.)); +#383002 = DIRECTION('',(-1.,0.,0.)); +#383003 = ADVANCED_FACE('',(#383004),#383031,.T.); +#383004 = FACE_BOUND('',#383005,.T.); +#383005 = EDGE_LOOP('',(#383006,#383007,#383016,#383024)); +#383006 = ORIENTED_EDGE('',*,*,#382985,.T.); +#383007 = ORIENTED_EDGE('',*,*,#383008,.T.); +#383008 = EDGE_CURVE('',#382978,#383009,#383011,.T.); +#383009 = VERTEX_POINT('',#383010); +#383010 = CARTESIAN_POINT('',(140.69,-130.12,1.55)); +#383011 = CIRCLE('',#383012,0.139999827125); +#383012 = AXIS2_PLACEMENT_3D('',#383013,#383014,#383015); +#383013 = CARTESIAN_POINT('',(140.82999982712,-130.1200001728,1.55)); +#383014 = DIRECTION('',(0.,0.,-1.)); +#383015 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#383016 = ORIENTED_EDGE('',*,*,#383017,.F.); +#383017 = EDGE_CURVE('',#383018,#383009,#383020,.T.); +#383018 = VERTEX_POINT('',#383019); +#383019 = CARTESIAN_POINT('',(140.69,-130.12,1.51)); +#383020 = LINE('',#383021,#383022); +#383021 = CARTESIAN_POINT('',(140.69,-130.12,1.51)); +#383022 = VECTOR('',#383023,1.); +#383023 = DIRECTION('',(0.,0.,1.)); +#383024 = ORIENTED_EDGE('',*,*,#383025,.F.); +#383025 = EDGE_CURVE('',#382986,#383018,#383026,.T.); +#383026 = CIRCLE('',#383027,0.139999827125); +#383027 = AXIS2_PLACEMENT_3D('',#383028,#383029,#383030); +#383028 = CARTESIAN_POINT('',(140.82999982712,-130.1200001728,1.51)); +#383029 = DIRECTION('',(0.,0.,-1.)); +#383030 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#383031 = CYLINDRICAL_SURFACE('',#383032,0.139999827125); +#383032 = AXIS2_PLACEMENT_3D('',#383033,#383034,#383035); +#383033 = CARTESIAN_POINT('',(140.82999982712,-130.1200001728,1.51)); +#383034 = DIRECTION('',(0.,0.,-1.)); +#383035 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#383036 = ADVANCED_FACE('',(#383037),#383053,.T.); +#383037 = FACE_BOUND('',#383038,.T.); +#383038 = EDGE_LOOP('',(#383039,#383040,#383046,#383047)); +#383039 = ORIENTED_EDGE('',*,*,#383017,.T.); +#383040 = ORIENTED_EDGE('',*,*,#383041,.T.); +#383041 = EDGE_CURVE('',#383009,#382809,#383042,.T.); +#383042 = LINE('',#383043,#383044); +#383043 = CARTESIAN_POINT('',(140.69,-130.12,1.55)); +#383044 = VECTOR('',#383045,1.); +#383045 = DIRECTION('',(0.,1.,0.)); +#383046 = ORIENTED_EDGE('',*,*,#382806,.F.); +#383047 = ORIENTED_EDGE('',*,*,#383048,.F.); +#383048 = EDGE_CURVE('',#383018,#382807,#383049,.T.); +#383049 = LINE('',#383050,#383051); +#383050 = CARTESIAN_POINT('',(140.69,-130.12,1.51)); +#383051 = VECTOR('',#383052,1.); +#383052 = DIRECTION('',(0.,1.,0.)); +#383053 = PLANE('',#383054); +#383054 = AXIS2_PLACEMENT_3D('',#383055,#383056,#383057); +#383055 = CARTESIAN_POINT('',(140.69,-130.12,1.51)); +#383056 = DIRECTION('',(-1.,0.,0.)); +#383057 = DIRECTION('',(0.,1.,0.)); +#383058 = ADVANCED_FACE('',(#383059),#383069,.F.); +#383059 = FACE_BOUND('',#383060,.T.); +#383060 = EDGE_LOOP('',(#383061,#383062,#383063,#383064,#383065,#383066, + #383067,#383068)); +#383061 = ORIENTED_EDGE('',*,*,#382833,.T.); +#383062 = ORIENTED_EDGE('',*,*,#382865,.T.); +#383063 = ORIENTED_EDGE('',*,*,#382897,.T.); +#383064 = ORIENTED_EDGE('',*,*,#382929,.T.); +#383065 = ORIENTED_EDGE('',*,*,#382961,.T.); +#383066 = ORIENTED_EDGE('',*,*,#382993,.T.); +#383067 = ORIENTED_EDGE('',*,*,#383025,.T.); +#383068 = ORIENTED_EDGE('',*,*,#383048,.T.); +#383069 = PLANE('',#383070); +#383070 = AXIS2_PLACEMENT_3D('',#383071,#383072,#383073); +#383071 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383072 = DIRECTION('',(0.,0.,1.)); +#383073 = DIRECTION('',(1.,0.,-0.)); +#383074 = ADVANCED_FACE('',(#383075),#383085,.T.); +#383075 = FACE_BOUND('',#383076,.F.); +#383076 = EDGE_LOOP('',(#383077,#383078,#383079,#383080,#383081,#383082, + #383083,#383084)); +#383077 = ORIENTED_EDGE('',*,*,#382816,.T.); +#383078 = ORIENTED_EDGE('',*,*,#382849,.T.); +#383079 = ORIENTED_EDGE('',*,*,#382880,.T.); +#383080 = ORIENTED_EDGE('',*,*,#382913,.T.); +#383081 = ORIENTED_EDGE('',*,*,#382944,.T.); +#383082 = ORIENTED_EDGE('',*,*,#382977,.T.); +#383083 = ORIENTED_EDGE('',*,*,#383008,.T.); +#383084 = ORIENTED_EDGE('',*,*,#383041,.T.); +#383085 = PLANE('',#383086); +#383086 = AXIS2_PLACEMENT_3D('',#383087,#383088,#383089); +#383087 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383088 = DIRECTION('',(0.,0.,1.)); +#383089 = DIRECTION('',(1.,0.,-0.)); +#383090 = MANIFOLD_SOLID_BREP('',#383091); +#383091 = CLOSED_SHELL('',(#383092,#383134,#383165,#383198,#383229, + #383262,#383293,#383326,#383348,#383364)); +#383092 = ADVANCED_FACE('',(#383093),#383129,.T.); +#383093 = FACE_BOUND('',#383094,.T.); +#383094 = EDGE_LOOP('',(#383095,#383105,#383114,#383122)); +#383095 = ORIENTED_EDGE('',*,*,#383096,.T.); +#383096 = EDGE_CURVE('',#383097,#383099,#383101,.T.); +#383097 = VERTEX_POINT('',#383098); +#383098 = CARTESIAN_POINT('',(123.35,-61.9,1.51)); +#383099 = VERTEX_POINT('',#383100); +#383100 = CARTESIAN_POINT('',(123.35,-61.9,1.55)); +#383101 = LINE('',#383102,#383103); +#383102 = CARTESIAN_POINT('',(123.35,-61.9,1.51)); +#383103 = VECTOR('',#383104,1.); +#383104 = DIRECTION('',(0.,0.,1.)); +#383105 = ORIENTED_EDGE('',*,*,#383106,.T.); +#383106 = EDGE_CURVE('',#383099,#383107,#383109,.T.); +#383107 = VERTEX_POINT('',#383108); +#383108 = CARTESIAN_POINT('',(123.5,-61.75,1.55)); +#383109 = CIRCLE('',#383110,0.150000058649); +#383110 = AXIS2_PLACEMENT_3D('',#383111,#383112,#383113); +#383111 = CARTESIAN_POINT('',(123.50000005864,-61.90000005864,1.55)); +#383112 = DIRECTION('',(0.,0.,-1.)); +#383113 = DIRECTION('',(-1.,3.909954563454E-07,0.)); +#383114 = ORIENTED_EDGE('',*,*,#383115,.F.); +#383115 = EDGE_CURVE('',#383116,#383107,#383118,.T.); +#383116 = VERTEX_POINT('',#383117); +#383117 = CARTESIAN_POINT('',(123.5,-61.75,1.51)); +#383118 = LINE('',#383119,#383120); +#383119 = CARTESIAN_POINT('',(123.5,-61.75,1.51)); +#383120 = VECTOR('',#383121,1.); +#383121 = DIRECTION('',(0.,0.,1.)); +#383122 = ORIENTED_EDGE('',*,*,#383123,.F.); +#383123 = EDGE_CURVE('',#383097,#383116,#383124,.T.); +#383124 = CIRCLE('',#383125,0.150000058649); +#383125 = AXIS2_PLACEMENT_3D('',#383126,#383127,#383128); +#383126 = CARTESIAN_POINT('',(123.50000005864,-61.90000005864,1.51)); +#383127 = DIRECTION('',(0.,0.,-1.)); +#383128 = DIRECTION('',(-1.,3.909954563454E-07,0.)); +#383129 = CYLINDRICAL_SURFACE('',#383130,0.150000058649); +#383130 = AXIS2_PLACEMENT_3D('',#383131,#383132,#383133); +#383131 = CARTESIAN_POINT('',(123.50000005864,-61.90000005864,1.51)); +#383132 = DIRECTION('',(0.,0.,-1.)); +#383133 = DIRECTION('',(-1.,3.909954563454E-07,0.)); +#383134 = ADVANCED_FACE('',(#383135),#383160,.T.); +#383135 = FACE_BOUND('',#383136,.T.); +#383136 = EDGE_LOOP('',(#383137,#383138,#383146,#383154)); +#383137 = ORIENTED_EDGE('',*,*,#383115,.T.); +#383138 = ORIENTED_EDGE('',*,*,#383139,.T.); +#383139 = EDGE_CURVE('',#383107,#383140,#383142,.T.); +#383140 = VERTEX_POINT('',#383141); +#383141 = CARTESIAN_POINT('',(123.8,-61.75,1.55)); +#383142 = LINE('',#383143,#383144); +#383143 = CARTESIAN_POINT('',(123.5,-61.75,1.55)); +#383144 = VECTOR('',#383145,1.); +#383145 = DIRECTION('',(1.,0.,0.)); +#383146 = ORIENTED_EDGE('',*,*,#383147,.F.); +#383147 = EDGE_CURVE('',#383148,#383140,#383150,.T.); +#383148 = VERTEX_POINT('',#383149); +#383149 = CARTESIAN_POINT('',(123.8,-61.75,1.51)); +#383150 = LINE('',#383151,#383152); +#383151 = CARTESIAN_POINT('',(123.8,-61.75,1.51)); +#383152 = VECTOR('',#383153,1.); +#383153 = DIRECTION('',(0.,0.,1.)); +#383154 = ORIENTED_EDGE('',*,*,#383155,.F.); +#383155 = EDGE_CURVE('',#383116,#383148,#383156,.T.); +#383156 = LINE('',#383157,#383158); +#383157 = CARTESIAN_POINT('',(123.5,-61.75,1.51)); +#383158 = VECTOR('',#383159,1.); +#383159 = DIRECTION('',(1.,0.,0.)); +#383160 = PLANE('',#383161); +#383161 = AXIS2_PLACEMENT_3D('',#383162,#383163,#383164); +#383162 = CARTESIAN_POINT('',(123.5,-61.75,1.51)); +#383163 = DIRECTION('',(0.,1.,0.)); +#383164 = DIRECTION('',(1.,0.,0.)); +#383165 = ADVANCED_FACE('',(#383166),#383193,.T.); +#383166 = FACE_BOUND('',#383167,.T.); +#383167 = EDGE_LOOP('',(#383168,#383169,#383178,#383186)); +#383168 = ORIENTED_EDGE('',*,*,#383147,.T.); +#383169 = ORIENTED_EDGE('',*,*,#383170,.T.); +#383170 = EDGE_CURVE('',#383140,#383171,#383173,.T.); +#383171 = VERTEX_POINT('',#383172); +#383172 = CARTESIAN_POINT('',(123.95,-61.9,1.55)); +#383173 = CIRCLE('',#383174,0.150000058649); +#383174 = AXIS2_PLACEMENT_3D('',#383175,#383176,#383177); +#383175 = CARTESIAN_POINT('',(123.79999994135,-61.90000005864,1.55)); +#383176 = DIRECTION('',(0.,0.,-1.)); +#383177 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#383178 = ORIENTED_EDGE('',*,*,#383179,.F.); +#383179 = EDGE_CURVE('',#383180,#383171,#383182,.T.); +#383180 = VERTEX_POINT('',#383181); +#383181 = CARTESIAN_POINT('',(123.95,-61.9,1.51)); +#383182 = LINE('',#383183,#383184); +#383183 = CARTESIAN_POINT('',(123.95,-61.9,1.51)); +#383184 = VECTOR('',#383185,1.); +#383185 = DIRECTION('',(0.,0.,1.)); +#383186 = ORIENTED_EDGE('',*,*,#383187,.F.); +#383187 = EDGE_CURVE('',#383148,#383180,#383188,.T.); +#383188 = CIRCLE('',#383189,0.150000058649); +#383189 = AXIS2_PLACEMENT_3D('',#383190,#383191,#383192); +#383190 = CARTESIAN_POINT('',(123.79999994135,-61.90000005864,1.51)); +#383191 = DIRECTION('',(0.,0.,-1.)); +#383192 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#383193 = CYLINDRICAL_SURFACE('',#383194,0.150000058649); +#383194 = AXIS2_PLACEMENT_3D('',#383195,#383196,#383197); +#383195 = CARTESIAN_POINT('',(123.79999994135,-61.90000005864,1.51)); +#383196 = DIRECTION('',(0.,0.,-1.)); +#383197 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#383198 = ADVANCED_FACE('',(#383199),#383224,.T.); +#383199 = FACE_BOUND('',#383200,.T.); +#383200 = EDGE_LOOP('',(#383201,#383202,#383210,#383218)); +#383201 = ORIENTED_EDGE('',*,*,#383179,.T.); +#383202 = ORIENTED_EDGE('',*,*,#383203,.T.); +#383203 = EDGE_CURVE('',#383171,#383204,#383206,.T.); +#383204 = VERTEX_POINT('',#383205); +#383205 = CARTESIAN_POINT('',(123.95,-63.4,1.55)); +#383206 = LINE('',#383207,#383208); +#383207 = CARTESIAN_POINT('',(123.95,-61.9,1.55)); +#383208 = VECTOR('',#383209,1.); +#383209 = DIRECTION('',(0.,-1.,0.)); +#383210 = ORIENTED_EDGE('',*,*,#383211,.F.); +#383211 = EDGE_CURVE('',#383212,#383204,#383214,.T.); +#383212 = VERTEX_POINT('',#383213); +#383213 = CARTESIAN_POINT('',(123.95,-63.4,1.51)); +#383214 = LINE('',#383215,#383216); +#383215 = CARTESIAN_POINT('',(123.95,-63.4,1.51)); +#383216 = VECTOR('',#383217,1.); +#383217 = DIRECTION('',(0.,0.,1.)); +#383218 = ORIENTED_EDGE('',*,*,#383219,.F.); +#383219 = EDGE_CURVE('',#383180,#383212,#383220,.T.); +#383220 = LINE('',#383221,#383222); +#383221 = CARTESIAN_POINT('',(123.95,-61.9,1.51)); +#383222 = VECTOR('',#383223,1.); +#383223 = DIRECTION('',(0.,-1.,0.)); +#383224 = PLANE('',#383225); +#383225 = AXIS2_PLACEMENT_3D('',#383226,#383227,#383228); +#383226 = CARTESIAN_POINT('',(123.95,-61.9,1.51)); +#383227 = DIRECTION('',(1.,0.,-0.)); +#383228 = DIRECTION('',(0.,-1.,0.)); +#383229 = ADVANCED_FACE('',(#383230),#383257,.T.); +#383230 = FACE_BOUND('',#383231,.T.); +#383231 = EDGE_LOOP('',(#383232,#383233,#383242,#383250)); +#383232 = ORIENTED_EDGE('',*,*,#383211,.T.); +#383233 = ORIENTED_EDGE('',*,*,#383234,.T.); +#383234 = EDGE_CURVE('',#383204,#383235,#383237,.T.); +#383235 = VERTEX_POINT('',#383236); +#383236 = CARTESIAN_POINT('',(123.8,-63.55,1.55)); +#383237 = CIRCLE('',#383238,0.150000058649); +#383238 = AXIS2_PLACEMENT_3D('',#383239,#383240,#383241); +#383239 = CARTESIAN_POINT('',(123.79999994135,-63.39999994135,1.55)); +#383240 = DIRECTION('',(0.,0.,-1.)); +#383241 = DIRECTION('',(1.,-3.909954563454E-07,0.)); +#383242 = ORIENTED_EDGE('',*,*,#383243,.F.); +#383243 = EDGE_CURVE('',#383244,#383235,#383246,.T.); +#383244 = VERTEX_POINT('',#383245); +#383245 = CARTESIAN_POINT('',(123.8,-63.55,1.51)); +#383246 = LINE('',#383247,#383248); +#383247 = CARTESIAN_POINT('',(123.8,-63.55,1.51)); +#383248 = VECTOR('',#383249,1.); +#383249 = DIRECTION('',(0.,0.,1.)); +#383250 = ORIENTED_EDGE('',*,*,#383251,.F.); +#383251 = EDGE_CURVE('',#383212,#383244,#383252,.T.); +#383252 = CIRCLE('',#383253,0.150000058649); +#383253 = AXIS2_PLACEMENT_3D('',#383254,#383255,#383256); +#383254 = CARTESIAN_POINT('',(123.79999994135,-63.39999994135,1.51)); +#383255 = DIRECTION('',(0.,0.,-1.)); +#383256 = DIRECTION('',(1.,-3.909954563454E-07,0.)); +#383257 = CYLINDRICAL_SURFACE('',#383258,0.150000058649); +#383258 = AXIS2_PLACEMENT_3D('',#383259,#383260,#383261); +#383259 = CARTESIAN_POINT('',(123.79999994135,-63.39999994135,1.51)); +#383260 = DIRECTION('',(0.,0.,-1.)); +#383261 = DIRECTION('',(1.,-3.909954563454E-07,0.)); +#383262 = ADVANCED_FACE('',(#383263),#383288,.T.); +#383263 = FACE_BOUND('',#383264,.T.); +#383264 = EDGE_LOOP('',(#383265,#383266,#383274,#383282)); +#383265 = ORIENTED_EDGE('',*,*,#383243,.T.); +#383266 = ORIENTED_EDGE('',*,*,#383267,.T.); +#383267 = EDGE_CURVE('',#383235,#383268,#383270,.T.); +#383268 = VERTEX_POINT('',#383269); +#383269 = CARTESIAN_POINT('',(123.5,-63.55,1.55)); +#383270 = LINE('',#383271,#383272); +#383271 = CARTESIAN_POINT('',(123.8,-63.55,1.55)); +#383272 = VECTOR('',#383273,1.); +#383273 = DIRECTION('',(-1.,0.,0.)); +#383274 = ORIENTED_EDGE('',*,*,#383275,.F.); +#383275 = EDGE_CURVE('',#383276,#383268,#383278,.T.); +#383276 = VERTEX_POINT('',#383277); +#383277 = CARTESIAN_POINT('',(123.5,-63.55,1.51)); +#383278 = LINE('',#383279,#383280); +#383279 = CARTESIAN_POINT('',(123.5,-63.55,1.51)); +#383280 = VECTOR('',#383281,1.); +#383281 = DIRECTION('',(0.,0.,1.)); +#383282 = ORIENTED_EDGE('',*,*,#383283,.F.); +#383283 = EDGE_CURVE('',#383244,#383276,#383284,.T.); +#383284 = LINE('',#383285,#383286); +#383285 = CARTESIAN_POINT('',(123.8,-63.55,1.51)); +#383286 = VECTOR('',#383287,1.); +#383287 = DIRECTION('',(-1.,0.,0.)); +#383288 = PLANE('',#383289); +#383289 = AXIS2_PLACEMENT_3D('',#383290,#383291,#383292); +#383290 = CARTESIAN_POINT('',(123.8,-63.55,1.51)); +#383291 = DIRECTION('',(0.,-1.,0.)); +#383292 = DIRECTION('',(-1.,0.,0.)); +#383293 = ADVANCED_FACE('',(#383294),#383321,.T.); +#383294 = FACE_BOUND('',#383295,.T.); +#383295 = EDGE_LOOP('',(#383296,#383297,#383306,#383314)); +#383296 = ORIENTED_EDGE('',*,*,#383275,.T.); +#383297 = ORIENTED_EDGE('',*,*,#383298,.T.); +#383298 = EDGE_CURVE('',#383268,#383299,#383301,.T.); +#383299 = VERTEX_POINT('',#383300); +#383300 = CARTESIAN_POINT('',(123.35,-63.4,1.55)); +#383301 = CIRCLE('',#383302,0.150000058649); +#383302 = AXIS2_PLACEMENT_3D('',#383303,#383304,#383305); +#383303 = CARTESIAN_POINT('',(123.50000005864,-63.39999994135,1.55)); +#383304 = DIRECTION('',(0.,0.,-1.)); +#383305 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#383306 = ORIENTED_EDGE('',*,*,#383307,.F.); +#383307 = EDGE_CURVE('',#383308,#383299,#383310,.T.); +#383308 = VERTEX_POINT('',#383309); +#383309 = CARTESIAN_POINT('',(123.35,-63.4,1.51)); +#383310 = LINE('',#383311,#383312); +#383311 = CARTESIAN_POINT('',(123.35,-63.4,1.51)); +#383312 = VECTOR('',#383313,1.); +#383313 = DIRECTION('',(0.,0.,1.)); +#383314 = ORIENTED_EDGE('',*,*,#383315,.F.); +#383315 = EDGE_CURVE('',#383276,#383308,#383316,.T.); +#383316 = CIRCLE('',#383317,0.150000058649); +#383317 = AXIS2_PLACEMENT_3D('',#383318,#383319,#383320); +#383318 = CARTESIAN_POINT('',(123.50000005864,-63.39999994135,1.51)); +#383319 = DIRECTION('',(0.,0.,-1.)); +#383320 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#383321 = CYLINDRICAL_SURFACE('',#383322,0.150000058649); +#383322 = AXIS2_PLACEMENT_3D('',#383323,#383324,#383325); +#383323 = CARTESIAN_POINT('',(123.50000005864,-63.39999994135,1.51)); +#383324 = DIRECTION('',(0.,0.,-1.)); +#383325 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#383326 = ADVANCED_FACE('',(#383327),#383343,.T.); +#383327 = FACE_BOUND('',#383328,.T.); +#383328 = EDGE_LOOP('',(#383329,#383330,#383336,#383337)); +#383329 = ORIENTED_EDGE('',*,*,#383307,.T.); +#383330 = ORIENTED_EDGE('',*,*,#383331,.T.); +#383331 = EDGE_CURVE('',#383299,#383099,#383332,.T.); +#383332 = LINE('',#383333,#383334); +#383333 = CARTESIAN_POINT('',(123.35,-63.4,1.55)); +#383334 = VECTOR('',#383335,1.); +#383335 = DIRECTION('',(0.,1.,0.)); +#383336 = ORIENTED_EDGE('',*,*,#383096,.F.); +#383337 = ORIENTED_EDGE('',*,*,#383338,.F.); +#383338 = EDGE_CURVE('',#383308,#383097,#383339,.T.); +#383339 = LINE('',#383340,#383341); +#383340 = CARTESIAN_POINT('',(123.35,-63.4,1.51)); +#383341 = VECTOR('',#383342,1.); +#383342 = DIRECTION('',(0.,1.,0.)); +#383343 = PLANE('',#383344); +#383344 = AXIS2_PLACEMENT_3D('',#383345,#383346,#383347); +#383345 = CARTESIAN_POINT('',(123.35,-63.4,1.51)); +#383346 = DIRECTION('',(-1.,0.,0.)); +#383347 = DIRECTION('',(0.,1.,0.)); +#383348 = ADVANCED_FACE('',(#383349),#383359,.F.); +#383349 = FACE_BOUND('',#383350,.T.); +#383350 = EDGE_LOOP('',(#383351,#383352,#383353,#383354,#383355,#383356, + #383357,#383358)); +#383351 = ORIENTED_EDGE('',*,*,#383123,.T.); +#383352 = ORIENTED_EDGE('',*,*,#383155,.T.); +#383353 = ORIENTED_EDGE('',*,*,#383187,.T.); +#383354 = ORIENTED_EDGE('',*,*,#383219,.T.); +#383355 = ORIENTED_EDGE('',*,*,#383251,.T.); +#383356 = ORIENTED_EDGE('',*,*,#383283,.T.); +#383357 = ORIENTED_EDGE('',*,*,#383315,.T.); +#383358 = ORIENTED_EDGE('',*,*,#383338,.T.); +#383359 = PLANE('',#383360); +#383360 = AXIS2_PLACEMENT_3D('',#383361,#383362,#383363); +#383361 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383362 = DIRECTION('',(0.,0.,1.)); +#383363 = DIRECTION('',(1.,0.,-0.)); +#383364 = ADVANCED_FACE('',(#383365),#383375,.T.); +#383365 = FACE_BOUND('',#383366,.F.); +#383366 = EDGE_LOOP('',(#383367,#383368,#383369,#383370,#383371,#383372, + #383373,#383374)); +#383367 = ORIENTED_EDGE('',*,*,#383106,.T.); +#383368 = ORIENTED_EDGE('',*,*,#383139,.T.); +#383369 = ORIENTED_EDGE('',*,*,#383170,.T.); +#383370 = ORIENTED_EDGE('',*,*,#383203,.T.); +#383371 = ORIENTED_EDGE('',*,*,#383234,.T.); +#383372 = ORIENTED_EDGE('',*,*,#383267,.T.); +#383373 = ORIENTED_EDGE('',*,*,#383298,.T.); +#383374 = ORIENTED_EDGE('',*,*,#383331,.T.); +#383375 = PLANE('',#383376); +#383376 = AXIS2_PLACEMENT_3D('',#383377,#383378,#383379); +#383377 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383378 = DIRECTION('',(0.,0.,1.)); +#383379 = DIRECTION('',(1.,0.,-0.)); +#383380 = MANIFOLD_SOLID_BREP('',#383381); +#383381 = CLOSED_SHELL('',(#383382,#383422,#383453,#383484,#383506, + #383518)); +#383382 = ADVANCED_FACE('',(#383383),#383417,.T.); +#383383 = FACE_BOUND('',#383384,.T.); +#383384 = EDGE_LOOP('',(#383385,#383395,#383403,#383411)); +#383385 = ORIENTED_EDGE('',*,*,#383386,.T.); +#383386 = EDGE_CURVE('',#383387,#383389,#383391,.T.); +#383387 = VERTEX_POINT('',#383388); +#383388 = CARTESIAN_POINT('',(128.5,-65.1,1.51)); +#383389 = VERTEX_POINT('',#383390); +#383390 = CARTESIAN_POINT('',(128.5,-65.1,1.55)); +#383391 = LINE('',#383392,#383393); +#383392 = CARTESIAN_POINT('',(128.5,-65.1,1.51)); +#383393 = VECTOR('',#383394,1.); +#383394 = DIRECTION('',(0.,0.,1.)); +#383395 = ORIENTED_EDGE('',*,*,#383396,.T.); +#383396 = EDGE_CURVE('',#383389,#383397,#383399,.T.); +#383397 = VERTEX_POINT('',#383398); +#383398 = CARTESIAN_POINT('',(128.5,-64.2,1.55)); +#383399 = LINE('',#383400,#383401); +#383400 = CARTESIAN_POINT('',(128.5,-65.1,1.55)); +#383401 = VECTOR('',#383402,1.); +#383402 = DIRECTION('',(0.,1.,0.)); +#383403 = ORIENTED_EDGE('',*,*,#383404,.F.); +#383404 = EDGE_CURVE('',#383405,#383397,#383407,.T.); +#383405 = VERTEX_POINT('',#383406); +#383406 = CARTESIAN_POINT('',(128.5,-64.2,1.51)); +#383407 = LINE('',#383408,#383409); +#383408 = CARTESIAN_POINT('',(128.5,-64.2,1.51)); +#383409 = VECTOR('',#383410,1.); +#383410 = DIRECTION('',(0.,0.,1.)); +#383411 = ORIENTED_EDGE('',*,*,#383412,.F.); +#383412 = EDGE_CURVE('',#383387,#383405,#383413,.T.); +#383413 = LINE('',#383414,#383415); +#383414 = CARTESIAN_POINT('',(128.5,-65.1,1.51)); +#383415 = VECTOR('',#383416,1.); +#383416 = DIRECTION('',(0.,1.,0.)); +#383417 = PLANE('',#383418); +#383418 = AXIS2_PLACEMENT_3D('',#383419,#383420,#383421); +#383419 = CARTESIAN_POINT('',(128.5,-65.1,1.51)); +#383420 = DIRECTION('',(-1.,0.,0.)); +#383421 = DIRECTION('',(0.,1.,0.)); +#383422 = ADVANCED_FACE('',(#383423),#383448,.T.); +#383423 = FACE_BOUND('',#383424,.T.); +#383424 = EDGE_LOOP('',(#383425,#383426,#383434,#383442)); +#383425 = ORIENTED_EDGE('',*,*,#383404,.T.); +#383426 = ORIENTED_EDGE('',*,*,#383427,.T.); +#383427 = EDGE_CURVE('',#383397,#383428,#383430,.T.); +#383428 = VERTEX_POINT('',#383429); +#383429 = CARTESIAN_POINT('',(130.,-64.2,1.55)); +#383430 = LINE('',#383431,#383432); +#383431 = CARTESIAN_POINT('',(128.5,-64.2,1.55)); +#383432 = VECTOR('',#383433,1.); +#383433 = DIRECTION('',(1.,0.,0.)); +#383434 = ORIENTED_EDGE('',*,*,#383435,.F.); +#383435 = EDGE_CURVE('',#383436,#383428,#383438,.T.); +#383436 = VERTEX_POINT('',#383437); +#383437 = CARTESIAN_POINT('',(130.,-64.2,1.51)); +#383438 = LINE('',#383439,#383440); +#383439 = CARTESIAN_POINT('',(130.,-64.2,1.51)); +#383440 = VECTOR('',#383441,1.); +#383441 = DIRECTION('',(0.,0.,1.)); +#383442 = ORIENTED_EDGE('',*,*,#383443,.F.); +#383443 = EDGE_CURVE('',#383405,#383436,#383444,.T.); +#383444 = LINE('',#383445,#383446); +#383445 = CARTESIAN_POINT('',(128.5,-64.2,1.51)); +#383446 = VECTOR('',#383447,1.); +#383447 = DIRECTION('',(1.,0.,0.)); +#383448 = PLANE('',#383449); +#383449 = AXIS2_PLACEMENT_3D('',#383450,#383451,#383452); +#383450 = CARTESIAN_POINT('',(128.5,-64.2,1.51)); +#383451 = DIRECTION('',(0.,1.,0.)); +#383452 = DIRECTION('',(1.,0.,0.)); +#383453 = ADVANCED_FACE('',(#383454),#383479,.T.); +#383454 = FACE_BOUND('',#383455,.T.); +#383455 = EDGE_LOOP('',(#383456,#383457,#383465,#383473)); +#383456 = ORIENTED_EDGE('',*,*,#383435,.T.); +#383457 = ORIENTED_EDGE('',*,*,#383458,.T.); +#383458 = EDGE_CURVE('',#383428,#383459,#383461,.T.); +#383459 = VERTEX_POINT('',#383460); +#383460 = CARTESIAN_POINT('',(130.,-65.1,1.55)); +#383461 = LINE('',#383462,#383463); +#383462 = CARTESIAN_POINT('',(130.,-64.2,1.55)); +#383463 = VECTOR('',#383464,1.); +#383464 = DIRECTION('',(0.,-1.,0.)); +#383465 = ORIENTED_EDGE('',*,*,#383466,.F.); +#383466 = EDGE_CURVE('',#383467,#383459,#383469,.T.); +#383467 = VERTEX_POINT('',#383468); +#383468 = CARTESIAN_POINT('',(130.,-65.1,1.51)); +#383469 = LINE('',#383470,#383471); +#383470 = CARTESIAN_POINT('',(130.,-65.1,1.51)); +#383471 = VECTOR('',#383472,1.); +#383472 = DIRECTION('',(0.,0.,1.)); +#383473 = ORIENTED_EDGE('',*,*,#383474,.F.); +#383474 = EDGE_CURVE('',#383436,#383467,#383475,.T.); +#383475 = LINE('',#383476,#383477); +#383476 = CARTESIAN_POINT('',(130.,-64.2,1.51)); +#383477 = VECTOR('',#383478,1.); +#383478 = DIRECTION('',(0.,-1.,0.)); +#383479 = PLANE('',#383480); +#383480 = AXIS2_PLACEMENT_3D('',#383481,#383482,#383483); +#383481 = CARTESIAN_POINT('',(130.,-64.2,1.51)); +#383482 = DIRECTION('',(1.,0.,-0.)); +#383483 = DIRECTION('',(0.,-1.,0.)); +#383484 = ADVANCED_FACE('',(#383485),#383501,.T.); +#383485 = FACE_BOUND('',#383486,.T.); +#383486 = EDGE_LOOP('',(#383487,#383488,#383494,#383495)); +#383487 = ORIENTED_EDGE('',*,*,#383466,.T.); +#383488 = ORIENTED_EDGE('',*,*,#383489,.T.); +#383489 = EDGE_CURVE('',#383459,#383389,#383490,.T.); +#383490 = LINE('',#383491,#383492); +#383491 = CARTESIAN_POINT('',(130.,-65.1,1.55)); +#383492 = VECTOR('',#383493,1.); +#383493 = DIRECTION('',(-1.,0.,0.)); +#383494 = ORIENTED_EDGE('',*,*,#383386,.F.); +#383495 = ORIENTED_EDGE('',*,*,#383496,.F.); +#383496 = EDGE_CURVE('',#383467,#383387,#383497,.T.); +#383497 = LINE('',#383498,#383499); +#383498 = CARTESIAN_POINT('',(130.,-65.1,1.51)); +#383499 = VECTOR('',#383500,1.); +#383500 = DIRECTION('',(-1.,0.,0.)); +#383501 = PLANE('',#383502); +#383502 = AXIS2_PLACEMENT_3D('',#383503,#383504,#383505); +#383503 = CARTESIAN_POINT('',(130.,-65.1,1.51)); +#383504 = DIRECTION('',(0.,-1.,0.)); +#383505 = DIRECTION('',(-1.,0.,0.)); +#383506 = ADVANCED_FACE('',(#383507),#383513,.F.); +#383507 = FACE_BOUND('',#383508,.T.); +#383508 = EDGE_LOOP('',(#383509,#383510,#383511,#383512)); +#383509 = ORIENTED_EDGE('',*,*,#383412,.T.); +#383510 = ORIENTED_EDGE('',*,*,#383443,.T.); +#383511 = ORIENTED_EDGE('',*,*,#383474,.T.); +#383512 = ORIENTED_EDGE('',*,*,#383496,.T.); +#383513 = PLANE('',#383514); +#383514 = AXIS2_PLACEMENT_3D('',#383515,#383516,#383517); +#383515 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383516 = DIRECTION('',(0.,0.,1.)); +#383517 = DIRECTION('',(1.,0.,-0.)); +#383518 = ADVANCED_FACE('',(#383519),#383525,.T.); +#383519 = FACE_BOUND('',#383520,.F.); +#383520 = EDGE_LOOP('',(#383521,#383522,#383523,#383524)); +#383521 = ORIENTED_EDGE('',*,*,#383396,.T.); +#383522 = ORIENTED_EDGE('',*,*,#383427,.T.); +#383523 = ORIENTED_EDGE('',*,*,#383458,.T.); +#383524 = ORIENTED_EDGE('',*,*,#383489,.T.); +#383525 = PLANE('',#383526); +#383526 = AXIS2_PLACEMENT_3D('',#383527,#383528,#383529); +#383527 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383528 = DIRECTION('',(0.,0.,1.)); +#383529 = DIRECTION('',(1.,0.,-0.)); +#383530 = MANIFOLD_SOLID_BREP('',#383531); +#383531 = CLOSED_SHELL('',(#383532,#383572,#383603,#383634,#383656, + #383668)); +#383532 = ADVANCED_FACE('',(#383533),#383567,.T.); +#383533 = FACE_BOUND('',#383534,.T.); +#383534 = EDGE_LOOP('',(#383535,#383545,#383553,#383561)); +#383535 = ORIENTED_EDGE('',*,*,#383536,.T.); +#383536 = EDGE_CURVE('',#383537,#383539,#383541,.T.); +#383537 = VERTEX_POINT('',#383538); +#383538 = CARTESIAN_POINT('',(146.,-65.1,1.51)); +#383539 = VERTEX_POINT('',#383540); +#383540 = CARTESIAN_POINT('',(146.,-65.1,1.55)); +#383541 = LINE('',#383542,#383543); +#383542 = CARTESIAN_POINT('',(146.,-65.1,1.51)); +#383543 = VECTOR('',#383544,1.); +#383544 = DIRECTION('',(0.,0.,1.)); +#383545 = ORIENTED_EDGE('',*,*,#383546,.T.); +#383546 = EDGE_CURVE('',#383539,#383547,#383549,.T.); +#383547 = VERTEX_POINT('',#383548); +#383548 = CARTESIAN_POINT('',(146.,-64.2,1.55)); +#383549 = LINE('',#383550,#383551); +#383550 = CARTESIAN_POINT('',(146.,-65.1,1.55)); +#383551 = VECTOR('',#383552,1.); +#383552 = DIRECTION('',(0.,1.,0.)); +#383553 = ORIENTED_EDGE('',*,*,#383554,.F.); +#383554 = EDGE_CURVE('',#383555,#383547,#383557,.T.); +#383555 = VERTEX_POINT('',#383556); +#383556 = CARTESIAN_POINT('',(146.,-64.2,1.51)); +#383557 = LINE('',#383558,#383559); +#383558 = CARTESIAN_POINT('',(146.,-64.2,1.51)); +#383559 = VECTOR('',#383560,1.); +#383560 = DIRECTION('',(0.,0.,1.)); +#383561 = ORIENTED_EDGE('',*,*,#383562,.F.); +#383562 = EDGE_CURVE('',#383537,#383555,#383563,.T.); +#383563 = LINE('',#383564,#383565); +#383564 = CARTESIAN_POINT('',(146.,-65.1,1.51)); +#383565 = VECTOR('',#383566,1.); +#383566 = DIRECTION('',(0.,1.,0.)); +#383567 = PLANE('',#383568); +#383568 = AXIS2_PLACEMENT_3D('',#383569,#383570,#383571); +#383569 = CARTESIAN_POINT('',(146.,-65.1,1.51)); +#383570 = DIRECTION('',(-1.,0.,0.)); +#383571 = DIRECTION('',(0.,1.,0.)); +#383572 = ADVANCED_FACE('',(#383573),#383598,.T.); +#383573 = FACE_BOUND('',#383574,.T.); +#383574 = EDGE_LOOP('',(#383575,#383576,#383584,#383592)); +#383575 = ORIENTED_EDGE('',*,*,#383554,.T.); +#383576 = ORIENTED_EDGE('',*,*,#383577,.T.); +#383577 = EDGE_CURVE('',#383547,#383578,#383580,.T.); +#383578 = VERTEX_POINT('',#383579); +#383579 = CARTESIAN_POINT('',(147.5,-64.2,1.55)); +#383580 = LINE('',#383581,#383582); +#383581 = CARTESIAN_POINT('',(146.,-64.2,1.55)); +#383582 = VECTOR('',#383583,1.); +#383583 = DIRECTION('',(1.,0.,0.)); +#383584 = ORIENTED_EDGE('',*,*,#383585,.F.); +#383585 = EDGE_CURVE('',#383586,#383578,#383588,.T.); +#383586 = VERTEX_POINT('',#383587); +#383587 = CARTESIAN_POINT('',(147.5,-64.2,1.51)); +#383588 = LINE('',#383589,#383590); +#383589 = CARTESIAN_POINT('',(147.5,-64.2,1.51)); +#383590 = VECTOR('',#383591,1.); +#383591 = DIRECTION('',(0.,0.,1.)); +#383592 = ORIENTED_EDGE('',*,*,#383593,.F.); +#383593 = EDGE_CURVE('',#383555,#383586,#383594,.T.); +#383594 = LINE('',#383595,#383596); +#383595 = CARTESIAN_POINT('',(146.,-64.2,1.51)); +#383596 = VECTOR('',#383597,1.); +#383597 = DIRECTION('',(1.,0.,0.)); +#383598 = PLANE('',#383599); +#383599 = AXIS2_PLACEMENT_3D('',#383600,#383601,#383602); +#383600 = CARTESIAN_POINT('',(146.,-64.2,1.51)); +#383601 = DIRECTION('',(0.,1.,0.)); +#383602 = DIRECTION('',(1.,0.,0.)); +#383603 = ADVANCED_FACE('',(#383604),#383629,.T.); +#383604 = FACE_BOUND('',#383605,.T.); +#383605 = EDGE_LOOP('',(#383606,#383607,#383615,#383623)); +#383606 = ORIENTED_EDGE('',*,*,#383585,.T.); +#383607 = ORIENTED_EDGE('',*,*,#383608,.T.); +#383608 = EDGE_CURVE('',#383578,#383609,#383611,.T.); +#383609 = VERTEX_POINT('',#383610); +#383610 = CARTESIAN_POINT('',(147.5,-65.1,1.55)); +#383611 = LINE('',#383612,#383613); +#383612 = CARTESIAN_POINT('',(147.5,-64.2,1.55)); +#383613 = VECTOR('',#383614,1.); +#383614 = DIRECTION('',(0.,-1.,0.)); +#383615 = ORIENTED_EDGE('',*,*,#383616,.F.); +#383616 = EDGE_CURVE('',#383617,#383609,#383619,.T.); +#383617 = VERTEX_POINT('',#383618); +#383618 = CARTESIAN_POINT('',(147.5,-65.1,1.51)); +#383619 = LINE('',#383620,#383621); +#383620 = CARTESIAN_POINT('',(147.5,-65.1,1.51)); +#383621 = VECTOR('',#383622,1.); +#383622 = DIRECTION('',(0.,0.,1.)); +#383623 = ORIENTED_EDGE('',*,*,#383624,.F.); +#383624 = EDGE_CURVE('',#383586,#383617,#383625,.T.); +#383625 = LINE('',#383626,#383627); +#383626 = CARTESIAN_POINT('',(147.5,-64.2,1.51)); +#383627 = VECTOR('',#383628,1.); +#383628 = DIRECTION('',(0.,-1.,0.)); +#383629 = PLANE('',#383630); +#383630 = AXIS2_PLACEMENT_3D('',#383631,#383632,#383633); +#383631 = CARTESIAN_POINT('',(147.5,-64.2,1.51)); +#383632 = DIRECTION('',(1.,0.,-0.)); +#383633 = DIRECTION('',(0.,-1.,0.)); +#383634 = ADVANCED_FACE('',(#383635),#383651,.T.); +#383635 = FACE_BOUND('',#383636,.T.); +#383636 = EDGE_LOOP('',(#383637,#383638,#383644,#383645)); +#383637 = ORIENTED_EDGE('',*,*,#383616,.T.); +#383638 = ORIENTED_EDGE('',*,*,#383639,.T.); +#383639 = EDGE_CURVE('',#383609,#383539,#383640,.T.); +#383640 = LINE('',#383641,#383642); +#383641 = CARTESIAN_POINT('',(147.5,-65.1,1.55)); +#383642 = VECTOR('',#383643,1.); +#383643 = DIRECTION('',(-1.,0.,0.)); +#383644 = ORIENTED_EDGE('',*,*,#383536,.F.); +#383645 = ORIENTED_EDGE('',*,*,#383646,.F.); +#383646 = EDGE_CURVE('',#383617,#383537,#383647,.T.); +#383647 = LINE('',#383648,#383649); +#383648 = CARTESIAN_POINT('',(147.5,-65.1,1.51)); +#383649 = VECTOR('',#383650,1.); +#383650 = DIRECTION('',(-1.,0.,0.)); +#383651 = PLANE('',#383652); +#383652 = AXIS2_PLACEMENT_3D('',#383653,#383654,#383655); +#383653 = CARTESIAN_POINT('',(147.5,-65.1,1.51)); +#383654 = DIRECTION('',(0.,-1.,0.)); +#383655 = DIRECTION('',(-1.,0.,0.)); +#383656 = ADVANCED_FACE('',(#383657),#383663,.F.); +#383657 = FACE_BOUND('',#383658,.T.); +#383658 = EDGE_LOOP('',(#383659,#383660,#383661,#383662)); +#383659 = ORIENTED_EDGE('',*,*,#383562,.T.); +#383660 = ORIENTED_EDGE('',*,*,#383593,.T.); +#383661 = ORIENTED_EDGE('',*,*,#383624,.T.); +#383662 = ORIENTED_EDGE('',*,*,#383646,.T.); +#383663 = PLANE('',#383664); +#383664 = AXIS2_PLACEMENT_3D('',#383665,#383666,#383667); +#383665 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383666 = DIRECTION('',(0.,0.,1.)); +#383667 = DIRECTION('',(1.,0.,-0.)); +#383668 = ADVANCED_FACE('',(#383669),#383675,.T.); +#383669 = FACE_BOUND('',#383670,.F.); +#383670 = EDGE_LOOP('',(#383671,#383672,#383673,#383674)); +#383671 = ORIENTED_EDGE('',*,*,#383546,.T.); +#383672 = ORIENTED_EDGE('',*,*,#383577,.T.); +#383673 = ORIENTED_EDGE('',*,*,#383608,.T.); +#383674 = ORIENTED_EDGE('',*,*,#383639,.T.); +#383675 = PLANE('',#383676); +#383676 = AXIS2_PLACEMENT_3D('',#383677,#383678,#383679); +#383677 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383678 = DIRECTION('',(0.,0.,1.)); +#383679 = DIRECTION('',(1.,0.,-0.)); +#383680 = MANIFOLD_SOLID_BREP('',#383681); +#383681 = CLOSED_SHELL('',(#383682,#383722,#383753,#383784,#383806, + #383818)); +#383682 = ADVANCED_FACE('',(#383683),#383717,.T.); +#383683 = FACE_BOUND('',#383684,.T.); +#383684 = EDGE_LOOP('',(#383685,#383695,#383703,#383711)); +#383685 = ORIENTED_EDGE('',*,*,#383686,.T.); +#383686 = EDGE_CURVE('',#383687,#383689,#383691,.T.); +#383687 = VERTEX_POINT('',#383688); +#383688 = CARTESIAN_POINT('',(134.65,-71.42,1.51)); +#383689 = VERTEX_POINT('',#383690); +#383690 = CARTESIAN_POINT('',(134.65,-71.42,1.55)); +#383691 = LINE('',#383692,#383693); +#383692 = CARTESIAN_POINT('',(134.65,-71.42,1.51)); +#383693 = VECTOR('',#383694,1.); +#383694 = DIRECTION('',(0.,0.,1.)); +#383695 = ORIENTED_EDGE('',*,*,#383696,.T.); +#383696 = EDGE_CURVE('',#383689,#383697,#383699,.T.); +#383697 = VERTEX_POINT('',#383698); +#383698 = CARTESIAN_POINT('',(134.65,-70.52,1.55)); +#383699 = LINE('',#383700,#383701); +#383700 = CARTESIAN_POINT('',(134.65,-71.42,1.55)); +#383701 = VECTOR('',#383702,1.); +#383702 = DIRECTION('',(0.,1.,0.)); +#383703 = ORIENTED_EDGE('',*,*,#383704,.F.); +#383704 = EDGE_CURVE('',#383705,#383697,#383707,.T.); +#383705 = VERTEX_POINT('',#383706); +#383706 = CARTESIAN_POINT('',(134.65,-70.52,1.51)); +#383707 = LINE('',#383708,#383709); +#383708 = CARTESIAN_POINT('',(134.65,-70.52,1.51)); +#383709 = VECTOR('',#383710,1.); +#383710 = DIRECTION('',(0.,0.,1.)); +#383711 = ORIENTED_EDGE('',*,*,#383712,.F.); +#383712 = EDGE_CURVE('',#383687,#383705,#383713,.T.); +#383713 = LINE('',#383714,#383715); +#383714 = CARTESIAN_POINT('',(134.65,-71.42,1.51)); +#383715 = VECTOR('',#383716,1.); +#383716 = DIRECTION('',(0.,1.,0.)); +#383717 = PLANE('',#383718); +#383718 = AXIS2_PLACEMENT_3D('',#383719,#383720,#383721); +#383719 = CARTESIAN_POINT('',(134.65,-71.42,1.51)); +#383720 = DIRECTION('',(-1.,0.,0.)); +#383721 = DIRECTION('',(0.,1.,0.)); +#383722 = ADVANCED_FACE('',(#383723),#383748,.T.); +#383723 = FACE_BOUND('',#383724,.T.); +#383724 = EDGE_LOOP('',(#383725,#383726,#383734,#383742)); +#383725 = ORIENTED_EDGE('',*,*,#383704,.T.); +#383726 = ORIENTED_EDGE('',*,*,#383727,.T.); +#383727 = EDGE_CURVE('',#383697,#383728,#383730,.T.); +#383728 = VERTEX_POINT('',#383729); +#383729 = CARTESIAN_POINT('',(135.55,-70.52,1.55)); +#383730 = LINE('',#383731,#383732); +#383731 = CARTESIAN_POINT('',(134.65,-70.52,1.55)); +#383732 = VECTOR('',#383733,1.); +#383733 = DIRECTION('',(1.,0.,0.)); +#383734 = ORIENTED_EDGE('',*,*,#383735,.F.); +#383735 = EDGE_CURVE('',#383736,#383728,#383738,.T.); +#383736 = VERTEX_POINT('',#383737); +#383737 = CARTESIAN_POINT('',(135.55,-70.52,1.51)); +#383738 = LINE('',#383739,#383740); +#383739 = CARTESIAN_POINT('',(135.55,-70.52,1.51)); +#383740 = VECTOR('',#383741,1.); +#383741 = DIRECTION('',(0.,0.,1.)); +#383742 = ORIENTED_EDGE('',*,*,#383743,.F.); +#383743 = EDGE_CURVE('',#383705,#383736,#383744,.T.); +#383744 = LINE('',#383745,#383746); +#383745 = CARTESIAN_POINT('',(134.65,-70.52,1.51)); +#383746 = VECTOR('',#383747,1.); +#383747 = DIRECTION('',(1.,0.,0.)); +#383748 = PLANE('',#383749); +#383749 = AXIS2_PLACEMENT_3D('',#383750,#383751,#383752); +#383750 = CARTESIAN_POINT('',(134.65,-70.52,1.51)); +#383751 = DIRECTION('',(0.,1.,0.)); +#383752 = DIRECTION('',(1.,0.,0.)); +#383753 = ADVANCED_FACE('',(#383754),#383779,.T.); +#383754 = FACE_BOUND('',#383755,.T.); +#383755 = EDGE_LOOP('',(#383756,#383757,#383765,#383773)); +#383756 = ORIENTED_EDGE('',*,*,#383735,.T.); +#383757 = ORIENTED_EDGE('',*,*,#383758,.T.); +#383758 = EDGE_CURVE('',#383728,#383759,#383761,.T.); +#383759 = VERTEX_POINT('',#383760); +#383760 = CARTESIAN_POINT('',(135.55,-71.42,1.55)); +#383761 = LINE('',#383762,#383763); +#383762 = CARTESIAN_POINT('',(135.55,-70.52,1.55)); +#383763 = VECTOR('',#383764,1.); +#383764 = DIRECTION('',(0.,-1.,0.)); +#383765 = ORIENTED_EDGE('',*,*,#383766,.F.); +#383766 = EDGE_CURVE('',#383767,#383759,#383769,.T.); +#383767 = VERTEX_POINT('',#383768); +#383768 = CARTESIAN_POINT('',(135.55,-71.42,1.51)); +#383769 = LINE('',#383770,#383771); +#383770 = CARTESIAN_POINT('',(135.55,-71.42,1.51)); +#383771 = VECTOR('',#383772,1.); +#383772 = DIRECTION('',(0.,0.,1.)); +#383773 = ORIENTED_EDGE('',*,*,#383774,.F.); +#383774 = EDGE_CURVE('',#383736,#383767,#383775,.T.); +#383775 = LINE('',#383776,#383777); +#383776 = CARTESIAN_POINT('',(135.55,-70.52,1.51)); +#383777 = VECTOR('',#383778,1.); +#383778 = DIRECTION('',(0.,-1.,0.)); +#383779 = PLANE('',#383780); +#383780 = AXIS2_PLACEMENT_3D('',#383781,#383782,#383783); +#383781 = CARTESIAN_POINT('',(135.55,-70.52,1.51)); +#383782 = DIRECTION('',(1.,0.,-0.)); +#383783 = DIRECTION('',(0.,-1.,0.)); +#383784 = ADVANCED_FACE('',(#383785),#383801,.T.); +#383785 = FACE_BOUND('',#383786,.T.); +#383786 = EDGE_LOOP('',(#383787,#383788,#383794,#383795)); +#383787 = ORIENTED_EDGE('',*,*,#383766,.T.); +#383788 = ORIENTED_EDGE('',*,*,#383789,.T.); +#383789 = EDGE_CURVE('',#383759,#383689,#383790,.T.); +#383790 = LINE('',#383791,#383792); +#383791 = CARTESIAN_POINT('',(135.55,-71.42,1.55)); +#383792 = VECTOR('',#383793,1.); +#383793 = DIRECTION('',(-1.,0.,0.)); +#383794 = ORIENTED_EDGE('',*,*,#383686,.F.); +#383795 = ORIENTED_EDGE('',*,*,#383796,.F.); +#383796 = EDGE_CURVE('',#383767,#383687,#383797,.T.); +#383797 = LINE('',#383798,#383799); +#383798 = CARTESIAN_POINT('',(135.55,-71.42,1.51)); +#383799 = VECTOR('',#383800,1.); +#383800 = DIRECTION('',(-1.,0.,0.)); +#383801 = PLANE('',#383802); +#383802 = AXIS2_PLACEMENT_3D('',#383803,#383804,#383805); +#383803 = CARTESIAN_POINT('',(135.55,-71.42,1.51)); +#383804 = DIRECTION('',(0.,-1.,0.)); +#383805 = DIRECTION('',(-1.,0.,0.)); +#383806 = ADVANCED_FACE('',(#383807),#383813,.F.); +#383807 = FACE_BOUND('',#383808,.T.); +#383808 = EDGE_LOOP('',(#383809,#383810,#383811,#383812)); +#383809 = ORIENTED_EDGE('',*,*,#383712,.T.); +#383810 = ORIENTED_EDGE('',*,*,#383743,.T.); +#383811 = ORIENTED_EDGE('',*,*,#383774,.T.); +#383812 = ORIENTED_EDGE('',*,*,#383796,.T.); +#383813 = PLANE('',#383814); +#383814 = AXIS2_PLACEMENT_3D('',#383815,#383816,#383817); +#383815 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383816 = DIRECTION('',(0.,0.,1.)); +#383817 = DIRECTION('',(1.,0.,-0.)); +#383818 = ADVANCED_FACE('',(#383819),#383825,.T.); +#383819 = FACE_BOUND('',#383820,.F.); +#383820 = EDGE_LOOP('',(#383821,#383822,#383823,#383824)); +#383821 = ORIENTED_EDGE('',*,*,#383696,.T.); +#383822 = ORIENTED_EDGE('',*,*,#383727,.T.); +#383823 = ORIENTED_EDGE('',*,*,#383758,.T.); +#383824 = ORIENTED_EDGE('',*,*,#383789,.T.); +#383825 = PLANE('',#383826); +#383826 = AXIS2_PLACEMENT_3D('',#383827,#383828,#383829); +#383827 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383828 = DIRECTION('',(0.,0.,1.)); +#383829 = DIRECTION('',(1.,0.,-0.)); +#383830 = MANIFOLD_SOLID_BREP('',#383831); +#383831 = CLOSED_SHELL('',(#383832,#383872,#383903,#383934,#383956, + #383968)); +#383832 = ADVANCED_FACE('',(#383833),#383867,.T.); +#383833 = FACE_BOUND('',#383834,.T.); +#383834 = EDGE_LOOP('',(#383835,#383845,#383853,#383861)); +#383835 = ORIENTED_EDGE('',*,*,#383836,.T.); +#383836 = EDGE_CURVE('',#383837,#383839,#383841,.T.); +#383837 = VERTEX_POINT('',#383838); +#383838 = CARTESIAN_POINT('',(134.65,-72.82,1.51)); +#383839 = VERTEX_POINT('',#383840); +#383840 = CARTESIAN_POINT('',(134.65,-72.82,1.55)); +#383841 = LINE('',#383842,#383843); +#383842 = CARTESIAN_POINT('',(134.65,-72.82,1.51)); +#383843 = VECTOR('',#383844,1.); +#383844 = DIRECTION('',(0.,0.,1.)); +#383845 = ORIENTED_EDGE('',*,*,#383846,.T.); +#383846 = EDGE_CURVE('',#383839,#383847,#383849,.T.); +#383847 = VERTEX_POINT('',#383848); +#383848 = CARTESIAN_POINT('',(134.65,-71.92,1.55)); +#383849 = LINE('',#383850,#383851); +#383850 = CARTESIAN_POINT('',(134.65,-72.82,1.55)); +#383851 = VECTOR('',#383852,1.); +#383852 = DIRECTION('',(0.,1.,0.)); +#383853 = ORIENTED_EDGE('',*,*,#383854,.F.); +#383854 = EDGE_CURVE('',#383855,#383847,#383857,.T.); +#383855 = VERTEX_POINT('',#383856); +#383856 = CARTESIAN_POINT('',(134.65,-71.92,1.51)); +#383857 = LINE('',#383858,#383859); +#383858 = CARTESIAN_POINT('',(134.65,-71.92,1.51)); +#383859 = VECTOR('',#383860,1.); +#383860 = DIRECTION('',(0.,0.,1.)); +#383861 = ORIENTED_EDGE('',*,*,#383862,.F.); +#383862 = EDGE_CURVE('',#383837,#383855,#383863,.T.); +#383863 = LINE('',#383864,#383865); +#383864 = CARTESIAN_POINT('',(134.65,-72.82,1.51)); +#383865 = VECTOR('',#383866,1.); +#383866 = DIRECTION('',(0.,1.,0.)); +#383867 = PLANE('',#383868); +#383868 = AXIS2_PLACEMENT_3D('',#383869,#383870,#383871); +#383869 = CARTESIAN_POINT('',(134.65,-72.82,1.51)); +#383870 = DIRECTION('',(-1.,0.,0.)); +#383871 = DIRECTION('',(0.,1.,0.)); +#383872 = ADVANCED_FACE('',(#383873),#383898,.T.); +#383873 = FACE_BOUND('',#383874,.T.); +#383874 = EDGE_LOOP('',(#383875,#383876,#383884,#383892)); +#383875 = ORIENTED_EDGE('',*,*,#383854,.T.); +#383876 = ORIENTED_EDGE('',*,*,#383877,.T.); +#383877 = EDGE_CURVE('',#383847,#383878,#383880,.T.); +#383878 = VERTEX_POINT('',#383879); +#383879 = CARTESIAN_POINT('',(135.55,-71.92,1.55)); +#383880 = LINE('',#383881,#383882); +#383881 = CARTESIAN_POINT('',(134.65,-71.92,1.55)); +#383882 = VECTOR('',#383883,1.); +#383883 = DIRECTION('',(1.,0.,0.)); +#383884 = ORIENTED_EDGE('',*,*,#383885,.F.); +#383885 = EDGE_CURVE('',#383886,#383878,#383888,.T.); +#383886 = VERTEX_POINT('',#383887); +#383887 = CARTESIAN_POINT('',(135.55,-71.92,1.51)); +#383888 = LINE('',#383889,#383890); +#383889 = CARTESIAN_POINT('',(135.55,-71.92,1.51)); +#383890 = VECTOR('',#383891,1.); +#383891 = DIRECTION('',(0.,0.,1.)); +#383892 = ORIENTED_EDGE('',*,*,#383893,.F.); +#383893 = EDGE_CURVE('',#383855,#383886,#383894,.T.); +#383894 = LINE('',#383895,#383896); +#383895 = CARTESIAN_POINT('',(134.65,-71.92,1.51)); +#383896 = VECTOR('',#383897,1.); +#383897 = DIRECTION('',(1.,0.,0.)); +#383898 = PLANE('',#383899); +#383899 = AXIS2_PLACEMENT_3D('',#383900,#383901,#383902); +#383900 = CARTESIAN_POINT('',(134.65,-71.92,1.51)); +#383901 = DIRECTION('',(0.,1.,0.)); +#383902 = DIRECTION('',(1.,0.,0.)); +#383903 = ADVANCED_FACE('',(#383904),#383929,.T.); +#383904 = FACE_BOUND('',#383905,.T.); +#383905 = EDGE_LOOP('',(#383906,#383907,#383915,#383923)); +#383906 = ORIENTED_EDGE('',*,*,#383885,.T.); +#383907 = ORIENTED_EDGE('',*,*,#383908,.T.); +#383908 = EDGE_CURVE('',#383878,#383909,#383911,.T.); +#383909 = VERTEX_POINT('',#383910); +#383910 = CARTESIAN_POINT('',(135.55,-72.82,1.55)); +#383911 = LINE('',#383912,#383913); +#383912 = CARTESIAN_POINT('',(135.55,-71.92,1.55)); +#383913 = VECTOR('',#383914,1.); +#383914 = DIRECTION('',(0.,-1.,0.)); +#383915 = ORIENTED_EDGE('',*,*,#383916,.F.); +#383916 = EDGE_CURVE('',#383917,#383909,#383919,.T.); +#383917 = VERTEX_POINT('',#383918); +#383918 = CARTESIAN_POINT('',(135.55,-72.82,1.51)); +#383919 = LINE('',#383920,#383921); +#383920 = CARTESIAN_POINT('',(135.55,-72.82,1.51)); +#383921 = VECTOR('',#383922,1.); +#383922 = DIRECTION('',(0.,0.,1.)); +#383923 = ORIENTED_EDGE('',*,*,#383924,.F.); +#383924 = EDGE_CURVE('',#383886,#383917,#383925,.T.); +#383925 = LINE('',#383926,#383927); +#383926 = CARTESIAN_POINT('',(135.55,-71.92,1.51)); +#383927 = VECTOR('',#383928,1.); +#383928 = DIRECTION('',(0.,-1.,0.)); +#383929 = PLANE('',#383930); +#383930 = AXIS2_PLACEMENT_3D('',#383931,#383932,#383933); +#383931 = CARTESIAN_POINT('',(135.55,-71.92,1.51)); +#383932 = DIRECTION('',(1.,0.,-0.)); +#383933 = DIRECTION('',(0.,-1.,0.)); +#383934 = ADVANCED_FACE('',(#383935),#383951,.T.); +#383935 = FACE_BOUND('',#383936,.T.); +#383936 = EDGE_LOOP('',(#383937,#383938,#383944,#383945)); +#383937 = ORIENTED_EDGE('',*,*,#383916,.T.); +#383938 = ORIENTED_EDGE('',*,*,#383939,.T.); +#383939 = EDGE_CURVE('',#383909,#383839,#383940,.T.); +#383940 = LINE('',#383941,#383942); +#383941 = CARTESIAN_POINT('',(135.55,-72.82,1.55)); +#383942 = VECTOR('',#383943,1.); +#383943 = DIRECTION('',(-1.,0.,0.)); +#383944 = ORIENTED_EDGE('',*,*,#383836,.F.); +#383945 = ORIENTED_EDGE('',*,*,#383946,.F.); +#383946 = EDGE_CURVE('',#383917,#383837,#383947,.T.); +#383947 = LINE('',#383948,#383949); +#383948 = CARTESIAN_POINT('',(135.55,-72.82,1.51)); +#383949 = VECTOR('',#383950,1.); +#383950 = DIRECTION('',(-1.,0.,0.)); +#383951 = PLANE('',#383952); +#383952 = AXIS2_PLACEMENT_3D('',#383953,#383954,#383955); +#383953 = CARTESIAN_POINT('',(135.55,-72.82,1.51)); +#383954 = DIRECTION('',(0.,-1.,0.)); +#383955 = DIRECTION('',(-1.,0.,0.)); +#383956 = ADVANCED_FACE('',(#383957),#383963,.F.); +#383957 = FACE_BOUND('',#383958,.T.); +#383958 = EDGE_LOOP('',(#383959,#383960,#383961,#383962)); +#383959 = ORIENTED_EDGE('',*,*,#383862,.T.); +#383960 = ORIENTED_EDGE('',*,*,#383893,.T.); +#383961 = ORIENTED_EDGE('',*,*,#383924,.T.); +#383962 = ORIENTED_EDGE('',*,*,#383946,.T.); +#383963 = PLANE('',#383964); +#383964 = AXIS2_PLACEMENT_3D('',#383965,#383966,#383967); +#383965 = CARTESIAN_POINT('',(0.,0.,1.51)); +#383966 = DIRECTION('',(0.,0.,1.)); +#383967 = DIRECTION('',(1.,0.,-0.)); +#383968 = ADVANCED_FACE('',(#383969),#383975,.T.); +#383969 = FACE_BOUND('',#383970,.F.); +#383970 = EDGE_LOOP('',(#383971,#383972,#383973,#383974)); +#383971 = ORIENTED_EDGE('',*,*,#383846,.T.); +#383972 = ORIENTED_EDGE('',*,*,#383877,.T.); +#383973 = ORIENTED_EDGE('',*,*,#383908,.T.); +#383974 = ORIENTED_EDGE('',*,*,#383939,.T.); +#383975 = PLANE('',#383976); +#383976 = AXIS2_PLACEMENT_3D('',#383977,#383978,#383979); +#383977 = CARTESIAN_POINT('',(0.,0.,1.55)); +#383978 = DIRECTION('',(0.,0.,1.)); +#383979 = DIRECTION('',(1.,0.,-0.)); +#383980 = MANIFOLD_SOLID_BREP('',#383981); +#383981 = CLOSED_SHELL('',(#383982,#384022,#384053,#384084,#384106, + #384118)); +#383982 = ADVANCED_FACE('',(#383983),#384017,.T.); +#383983 = FACE_BOUND('',#383984,.T.); +#383984 = EDGE_LOOP('',(#383985,#383995,#384003,#384011)); +#383985 = ORIENTED_EDGE('',*,*,#383986,.T.); +#383986 = EDGE_CURVE('',#383987,#383989,#383991,.T.); +#383987 = VERTEX_POINT('',#383988); +#383988 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#383989 = VERTEX_POINT('',#383990); +#383990 = CARTESIAN_POINT('',(134.65,-74.22,1.55)); +#383991 = LINE('',#383992,#383993); +#383992 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#383993 = VECTOR('',#383994,1.); +#383994 = DIRECTION('',(0.,0.,1.)); +#383995 = ORIENTED_EDGE('',*,*,#383996,.T.); +#383996 = EDGE_CURVE('',#383989,#383997,#383999,.T.); +#383997 = VERTEX_POINT('',#383998); +#383998 = CARTESIAN_POINT('',(134.65,-73.32,1.55)); +#383999 = LINE('',#384000,#384001); +#384000 = CARTESIAN_POINT('',(134.65,-74.22,1.55)); +#384001 = VECTOR('',#384002,1.); +#384002 = DIRECTION('',(0.,1.,0.)); +#384003 = ORIENTED_EDGE('',*,*,#384004,.F.); +#384004 = EDGE_CURVE('',#384005,#383997,#384007,.T.); +#384005 = VERTEX_POINT('',#384006); +#384006 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384007 = LINE('',#384008,#384009); +#384008 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384009 = VECTOR('',#384010,1.); +#384010 = DIRECTION('',(0.,0.,1.)); +#384011 = ORIENTED_EDGE('',*,*,#384012,.F.); +#384012 = EDGE_CURVE('',#383987,#384005,#384013,.T.); +#384013 = LINE('',#384014,#384015); +#384014 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384015 = VECTOR('',#384016,1.); +#384016 = DIRECTION('',(0.,1.,0.)); +#384017 = PLANE('',#384018); +#384018 = AXIS2_PLACEMENT_3D('',#384019,#384020,#384021); +#384019 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384020 = DIRECTION('',(-1.,0.,0.)); +#384021 = DIRECTION('',(0.,1.,0.)); +#384022 = ADVANCED_FACE('',(#384023),#384048,.T.); +#384023 = FACE_BOUND('',#384024,.T.); +#384024 = EDGE_LOOP('',(#384025,#384026,#384034,#384042)); +#384025 = ORIENTED_EDGE('',*,*,#384004,.T.); +#384026 = ORIENTED_EDGE('',*,*,#384027,.T.); +#384027 = EDGE_CURVE('',#383997,#384028,#384030,.T.); +#384028 = VERTEX_POINT('',#384029); +#384029 = CARTESIAN_POINT('',(135.55,-73.32,1.55)); +#384030 = LINE('',#384031,#384032); +#384031 = CARTESIAN_POINT('',(134.65,-73.32,1.55)); +#384032 = VECTOR('',#384033,1.); +#384033 = DIRECTION('',(1.,0.,0.)); +#384034 = ORIENTED_EDGE('',*,*,#384035,.F.); +#384035 = EDGE_CURVE('',#384036,#384028,#384038,.T.); +#384036 = VERTEX_POINT('',#384037); +#384037 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384038 = LINE('',#384039,#384040); +#384039 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384040 = VECTOR('',#384041,1.); +#384041 = DIRECTION('',(0.,0.,1.)); +#384042 = ORIENTED_EDGE('',*,*,#384043,.F.); +#384043 = EDGE_CURVE('',#384005,#384036,#384044,.T.); +#384044 = LINE('',#384045,#384046); +#384045 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384046 = VECTOR('',#384047,1.); +#384047 = DIRECTION('',(1.,0.,0.)); +#384048 = PLANE('',#384049); +#384049 = AXIS2_PLACEMENT_3D('',#384050,#384051,#384052); +#384050 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384051 = DIRECTION('',(0.,1.,0.)); +#384052 = DIRECTION('',(1.,0.,0.)); +#384053 = ADVANCED_FACE('',(#384054),#384079,.T.); +#384054 = FACE_BOUND('',#384055,.T.); +#384055 = EDGE_LOOP('',(#384056,#384057,#384065,#384073)); +#384056 = ORIENTED_EDGE('',*,*,#384035,.T.); +#384057 = ORIENTED_EDGE('',*,*,#384058,.T.); +#384058 = EDGE_CURVE('',#384028,#384059,#384061,.T.); +#384059 = VERTEX_POINT('',#384060); +#384060 = CARTESIAN_POINT('',(135.55,-74.22,1.55)); +#384061 = LINE('',#384062,#384063); +#384062 = CARTESIAN_POINT('',(135.55,-73.32,1.55)); +#384063 = VECTOR('',#384064,1.); +#384064 = DIRECTION('',(0.,-1.,0.)); +#384065 = ORIENTED_EDGE('',*,*,#384066,.F.); +#384066 = EDGE_CURVE('',#384067,#384059,#384069,.T.); +#384067 = VERTEX_POINT('',#384068); +#384068 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384069 = LINE('',#384070,#384071); +#384070 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384071 = VECTOR('',#384072,1.); +#384072 = DIRECTION('',(0.,0.,1.)); +#384073 = ORIENTED_EDGE('',*,*,#384074,.F.); +#384074 = EDGE_CURVE('',#384036,#384067,#384075,.T.); +#384075 = LINE('',#384076,#384077); +#384076 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384077 = VECTOR('',#384078,1.); +#384078 = DIRECTION('',(0.,-1.,0.)); +#384079 = PLANE('',#384080); +#384080 = AXIS2_PLACEMENT_3D('',#384081,#384082,#384083); +#384081 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384082 = DIRECTION('',(1.,0.,-0.)); +#384083 = DIRECTION('',(0.,-1.,0.)); +#384084 = ADVANCED_FACE('',(#384085),#384101,.T.); +#384085 = FACE_BOUND('',#384086,.T.); +#384086 = EDGE_LOOP('',(#384087,#384088,#384094,#384095)); +#384087 = ORIENTED_EDGE('',*,*,#384066,.T.); +#384088 = ORIENTED_EDGE('',*,*,#384089,.T.); +#384089 = EDGE_CURVE('',#384059,#383989,#384090,.T.); +#384090 = LINE('',#384091,#384092); +#384091 = CARTESIAN_POINT('',(135.55,-74.22,1.55)); +#384092 = VECTOR('',#384093,1.); +#384093 = DIRECTION('',(-1.,0.,0.)); +#384094 = ORIENTED_EDGE('',*,*,#383986,.F.); +#384095 = ORIENTED_EDGE('',*,*,#384096,.F.); +#384096 = EDGE_CURVE('',#384067,#383987,#384097,.T.); +#384097 = LINE('',#384098,#384099); +#384098 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384099 = VECTOR('',#384100,1.); +#384100 = DIRECTION('',(-1.,0.,0.)); +#384101 = PLANE('',#384102); +#384102 = AXIS2_PLACEMENT_3D('',#384103,#384104,#384105); +#384103 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384104 = DIRECTION('',(0.,-1.,0.)); +#384105 = DIRECTION('',(-1.,0.,0.)); +#384106 = ADVANCED_FACE('',(#384107),#384113,.F.); +#384107 = FACE_BOUND('',#384108,.T.); +#384108 = EDGE_LOOP('',(#384109,#384110,#384111,#384112)); +#384109 = ORIENTED_EDGE('',*,*,#384012,.T.); +#384110 = ORIENTED_EDGE('',*,*,#384043,.T.); +#384111 = ORIENTED_EDGE('',*,*,#384074,.T.); +#384112 = ORIENTED_EDGE('',*,*,#384096,.T.); +#384113 = PLANE('',#384114); +#384114 = AXIS2_PLACEMENT_3D('',#384115,#384116,#384117); +#384115 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384116 = DIRECTION('',(0.,0.,1.)); +#384117 = DIRECTION('',(1.,0.,-0.)); +#384118 = ADVANCED_FACE('',(#384119),#384125,.T.); +#384119 = FACE_BOUND('',#384120,.F.); +#384120 = EDGE_LOOP('',(#384121,#384122,#384123,#384124)); +#384121 = ORIENTED_EDGE('',*,*,#383996,.T.); +#384122 = ORIENTED_EDGE('',*,*,#384027,.T.); +#384123 = ORIENTED_EDGE('',*,*,#384058,.T.); +#384124 = ORIENTED_EDGE('',*,*,#384089,.T.); +#384125 = PLANE('',#384126); +#384126 = AXIS2_PLACEMENT_3D('',#384127,#384128,#384129); +#384127 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384128 = DIRECTION('',(0.,0.,1.)); +#384129 = DIRECTION('',(1.,0.,-0.)); +#384130 = MANIFOLD_SOLID_BREP('',#384131); +#384131 = CLOSED_SHELL('',(#384132,#384172,#384203,#384234,#384256, + #384268)); +#384132 = ADVANCED_FACE('',(#384133),#384167,.T.); +#384133 = FACE_BOUND('',#384134,.T.); +#384134 = EDGE_LOOP('',(#384135,#384145,#384153,#384161)); +#384135 = ORIENTED_EDGE('',*,*,#384136,.T.); +#384136 = EDGE_CURVE('',#384137,#384139,#384141,.T.); +#384137 = VERTEX_POINT('',#384138); +#384138 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384139 = VERTEX_POINT('',#384140); +#384140 = CARTESIAN_POINT('',(134.65,-74.22,1.55)); +#384141 = LINE('',#384142,#384143); +#384142 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384143 = VECTOR('',#384144,1.); +#384144 = DIRECTION('',(0.,0.,1.)); +#384145 = ORIENTED_EDGE('',*,*,#384146,.T.); +#384146 = EDGE_CURVE('',#384139,#384147,#384149,.T.); +#384147 = VERTEX_POINT('',#384148); +#384148 = CARTESIAN_POINT('',(134.65,-73.32,1.55)); +#384149 = LINE('',#384150,#384151); +#384150 = CARTESIAN_POINT('',(134.65,-74.22,1.55)); +#384151 = VECTOR('',#384152,1.); +#384152 = DIRECTION('',(0.,1.,0.)); +#384153 = ORIENTED_EDGE('',*,*,#384154,.F.); +#384154 = EDGE_CURVE('',#384155,#384147,#384157,.T.); +#384155 = VERTEX_POINT('',#384156); +#384156 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384157 = LINE('',#384158,#384159); +#384158 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384159 = VECTOR('',#384160,1.); +#384160 = DIRECTION('',(0.,0.,1.)); +#384161 = ORIENTED_EDGE('',*,*,#384162,.F.); +#384162 = EDGE_CURVE('',#384137,#384155,#384163,.T.); +#384163 = LINE('',#384164,#384165); +#384164 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384165 = VECTOR('',#384166,1.); +#384166 = DIRECTION('',(0.,1.,0.)); +#384167 = PLANE('',#384168); +#384168 = AXIS2_PLACEMENT_3D('',#384169,#384170,#384171); +#384169 = CARTESIAN_POINT('',(134.65,-74.22,1.51)); +#384170 = DIRECTION('',(-1.,0.,0.)); +#384171 = DIRECTION('',(0.,1.,0.)); +#384172 = ADVANCED_FACE('',(#384173),#384198,.T.); +#384173 = FACE_BOUND('',#384174,.T.); +#384174 = EDGE_LOOP('',(#384175,#384176,#384184,#384192)); +#384175 = ORIENTED_EDGE('',*,*,#384154,.T.); +#384176 = ORIENTED_EDGE('',*,*,#384177,.T.); +#384177 = EDGE_CURVE('',#384147,#384178,#384180,.T.); +#384178 = VERTEX_POINT('',#384179); +#384179 = CARTESIAN_POINT('',(135.55,-73.32,1.55)); +#384180 = LINE('',#384181,#384182); +#384181 = CARTESIAN_POINT('',(134.65,-73.32,1.55)); +#384182 = VECTOR('',#384183,1.); +#384183 = DIRECTION('',(1.,0.,0.)); +#384184 = ORIENTED_EDGE('',*,*,#384185,.F.); +#384185 = EDGE_CURVE('',#384186,#384178,#384188,.T.); +#384186 = VERTEX_POINT('',#384187); +#384187 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384188 = LINE('',#384189,#384190); +#384189 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384190 = VECTOR('',#384191,1.); +#384191 = DIRECTION('',(0.,0.,1.)); +#384192 = ORIENTED_EDGE('',*,*,#384193,.F.); +#384193 = EDGE_CURVE('',#384155,#384186,#384194,.T.); +#384194 = LINE('',#384195,#384196); +#384195 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384196 = VECTOR('',#384197,1.); +#384197 = DIRECTION('',(1.,0.,0.)); +#384198 = PLANE('',#384199); +#384199 = AXIS2_PLACEMENT_3D('',#384200,#384201,#384202); +#384200 = CARTESIAN_POINT('',(134.65,-73.32,1.51)); +#384201 = DIRECTION('',(0.,1.,0.)); +#384202 = DIRECTION('',(1.,0.,0.)); +#384203 = ADVANCED_FACE('',(#384204),#384229,.T.); +#384204 = FACE_BOUND('',#384205,.T.); +#384205 = EDGE_LOOP('',(#384206,#384207,#384215,#384223)); +#384206 = ORIENTED_EDGE('',*,*,#384185,.T.); +#384207 = ORIENTED_EDGE('',*,*,#384208,.T.); +#384208 = EDGE_CURVE('',#384178,#384209,#384211,.T.); +#384209 = VERTEX_POINT('',#384210); +#384210 = CARTESIAN_POINT('',(135.55,-74.22,1.55)); +#384211 = LINE('',#384212,#384213); +#384212 = CARTESIAN_POINT('',(135.55,-73.32,1.55)); +#384213 = VECTOR('',#384214,1.); +#384214 = DIRECTION('',(0.,-1.,0.)); +#384215 = ORIENTED_EDGE('',*,*,#384216,.F.); +#384216 = EDGE_CURVE('',#384217,#384209,#384219,.T.); +#384217 = VERTEX_POINT('',#384218); +#384218 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384219 = LINE('',#384220,#384221); +#384220 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384221 = VECTOR('',#384222,1.); +#384222 = DIRECTION('',(0.,0.,1.)); +#384223 = ORIENTED_EDGE('',*,*,#384224,.F.); +#384224 = EDGE_CURVE('',#384186,#384217,#384225,.T.); +#384225 = LINE('',#384226,#384227); +#384226 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384227 = VECTOR('',#384228,1.); +#384228 = DIRECTION('',(0.,-1.,0.)); +#384229 = PLANE('',#384230); +#384230 = AXIS2_PLACEMENT_3D('',#384231,#384232,#384233); +#384231 = CARTESIAN_POINT('',(135.55,-73.32,1.51)); +#384232 = DIRECTION('',(1.,0.,-0.)); +#384233 = DIRECTION('',(0.,-1.,0.)); +#384234 = ADVANCED_FACE('',(#384235),#384251,.T.); +#384235 = FACE_BOUND('',#384236,.T.); +#384236 = EDGE_LOOP('',(#384237,#384238,#384244,#384245)); +#384237 = ORIENTED_EDGE('',*,*,#384216,.T.); +#384238 = ORIENTED_EDGE('',*,*,#384239,.T.); +#384239 = EDGE_CURVE('',#384209,#384139,#384240,.T.); +#384240 = LINE('',#384241,#384242); +#384241 = CARTESIAN_POINT('',(135.55,-74.22,1.55)); +#384242 = VECTOR('',#384243,1.); +#384243 = DIRECTION('',(-1.,0.,0.)); +#384244 = ORIENTED_EDGE('',*,*,#384136,.F.); +#384245 = ORIENTED_EDGE('',*,*,#384246,.F.); +#384246 = EDGE_CURVE('',#384217,#384137,#384247,.T.); +#384247 = LINE('',#384248,#384249); +#384248 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384249 = VECTOR('',#384250,1.); +#384250 = DIRECTION('',(-1.,0.,0.)); +#384251 = PLANE('',#384252); +#384252 = AXIS2_PLACEMENT_3D('',#384253,#384254,#384255); +#384253 = CARTESIAN_POINT('',(135.55,-74.22,1.51)); +#384254 = DIRECTION('',(0.,-1.,0.)); +#384255 = DIRECTION('',(-1.,0.,0.)); +#384256 = ADVANCED_FACE('',(#384257),#384263,.F.); +#384257 = FACE_BOUND('',#384258,.T.); +#384258 = EDGE_LOOP('',(#384259,#384260,#384261,#384262)); +#384259 = ORIENTED_EDGE('',*,*,#384162,.T.); +#384260 = ORIENTED_EDGE('',*,*,#384193,.T.); +#384261 = ORIENTED_EDGE('',*,*,#384224,.T.); +#384262 = ORIENTED_EDGE('',*,*,#384246,.T.); +#384263 = PLANE('',#384264); +#384264 = AXIS2_PLACEMENT_3D('',#384265,#384266,#384267); +#384265 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384266 = DIRECTION('',(0.,0.,1.)); +#384267 = DIRECTION('',(1.,0.,-0.)); +#384268 = ADVANCED_FACE('',(#384269),#384275,.T.); +#384269 = FACE_BOUND('',#384270,.F.); +#384270 = EDGE_LOOP('',(#384271,#384272,#384273,#384274)); +#384271 = ORIENTED_EDGE('',*,*,#384146,.T.); +#384272 = ORIENTED_EDGE('',*,*,#384177,.T.); +#384273 = ORIENTED_EDGE('',*,*,#384208,.T.); +#384274 = ORIENTED_EDGE('',*,*,#384239,.T.); +#384275 = PLANE('',#384276); +#384276 = AXIS2_PLACEMENT_3D('',#384277,#384278,#384279); +#384277 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384278 = DIRECTION('',(0.,0.,1.)); +#384279 = DIRECTION('',(1.,0.,-0.)); +#384280 = MANIFOLD_SOLID_BREP('',#384281); +#384281 = CLOSED_SHELL('',(#384282,#384322,#384353,#384384,#384406, + #384418)); +#384282 = ADVANCED_FACE('',(#384283),#384317,.T.); +#384283 = FACE_BOUND('',#384284,.T.); +#384284 = EDGE_LOOP('',(#384285,#384295,#384303,#384311)); +#384285 = ORIENTED_EDGE('',*,*,#384286,.T.); +#384286 = EDGE_CURVE('',#384287,#384289,#384291,.T.); +#384287 = VERTEX_POINT('',#384288); +#384288 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384289 = VERTEX_POINT('',#384290); +#384290 = CARTESIAN_POINT('',(136.05,-71.42,1.55)); +#384291 = LINE('',#384292,#384293); +#384292 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384293 = VECTOR('',#384294,1.); +#384294 = DIRECTION('',(0.,0.,1.)); +#384295 = ORIENTED_EDGE('',*,*,#384296,.T.); +#384296 = EDGE_CURVE('',#384289,#384297,#384299,.T.); +#384297 = VERTEX_POINT('',#384298); +#384298 = CARTESIAN_POINT('',(136.05,-70.52,1.55)); +#384299 = LINE('',#384300,#384301); +#384300 = CARTESIAN_POINT('',(136.05,-71.42,1.55)); +#384301 = VECTOR('',#384302,1.); +#384302 = DIRECTION('',(0.,1.,0.)); +#384303 = ORIENTED_EDGE('',*,*,#384304,.F.); +#384304 = EDGE_CURVE('',#384305,#384297,#384307,.T.); +#384305 = VERTEX_POINT('',#384306); +#384306 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384307 = LINE('',#384308,#384309); +#384308 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384309 = VECTOR('',#384310,1.); +#384310 = DIRECTION('',(0.,0.,1.)); +#384311 = ORIENTED_EDGE('',*,*,#384312,.F.); +#384312 = EDGE_CURVE('',#384287,#384305,#384313,.T.); +#384313 = LINE('',#384314,#384315); +#384314 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384315 = VECTOR('',#384316,1.); +#384316 = DIRECTION('',(0.,1.,0.)); +#384317 = PLANE('',#384318); +#384318 = AXIS2_PLACEMENT_3D('',#384319,#384320,#384321); +#384319 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384320 = DIRECTION('',(-1.,0.,0.)); +#384321 = DIRECTION('',(0.,1.,0.)); +#384322 = ADVANCED_FACE('',(#384323),#384348,.T.); +#384323 = FACE_BOUND('',#384324,.T.); +#384324 = EDGE_LOOP('',(#384325,#384326,#384334,#384342)); +#384325 = ORIENTED_EDGE('',*,*,#384304,.T.); +#384326 = ORIENTED_EDGE('',*,*,#384327,.T.); +#384327 = EDGE_CURVE('',#384297,#384328,#384330,.T.); +#384328 = VERTEX_POINT('',#384329); +#384329 = CARTESIAN_POINT('',(136.95,-70.52,1.55)); +#384330 = LINE('',#384331,#384332); +#384331 = CARTESIAN_POINT('',(136.05,-70.52,1.55)); +#384332 = VECTOR('',#384333,1.); +#384333 = DIRECTION('',(1.,0.,0.)); +#384334 = ORIENTED_EDGE('',*,*,#384335,.F.); +#384335 = EDGE_CURVE('',#384336,#384328,#384338,.T.); +#384336 = VERTEX_POINT('',#384337); +#384337 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384338 = LINE('',#384339,#384340); +#384339 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384340 = VECTOR('',#384341,1.); +#384341 = DIRECTION('',(0.,0.,1.)); +#384342 = ORIENTED_EDGE('',*,*,#384343,.F.); +#384343 = EDGE_CURVE('',#384305,#384336,#384344,.T.); +#384344 = LINE('',#384345,#384346); +#384345 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384346 = VECTOR('',#384347,1.); +#384347 = DIRECTION('',(1.,0.,0.)); +#384348 = PLANE('',#384349); +#384349 = AXIS2_PLACEMENT_3D('',#384350,#384351,#384352); +#384350 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384351 = DIRECTION('',(0.,1.,0.)); +#384352 = DIRECTION('',(1.,0.,0.)); +#384353 = ADVANCED_FACE('',(#384354),#384379,.T.); +#384354 = FACE_BOUND('',#384355,.T.); +#384355 = EDGE_LOOP('',(#384356,#384357,#384365,#384373)); +#384356 = ORIENTED_EDGE('',*,*,#384335,.T.); +#384357 = ORIENTED_EDGE('',*,*,#384358,.T.); +#384358 = EDGE_CURVE('',#384328,#384359,#384361,.T.); +#384359 = VERTEX_POINT('',#384360); +#384360 = CARTESIAN_POINT('',(136.95,-71.42,1.55)); +#384361 = LINE('',#384362,#384363); +#384362 = CARTESIAN_POINT('',(136.95,-70.52,1.55)); +#384363 = VECTOR('',#384364,1.); +#384364 = DIRECTION('',(0.,-1.,0.)); +#384365 = ORIENTED_EDGE('',*,*,#384366,.F.); +#384366 = EDGE_CURVE('',#384367,#384359,#384369,.T.); +#384367 = VERTEX_POINT('',#384368); +#384368 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384369 = LINE('',#384370,#384371); +#384370 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384371 = VECTOR('',#384372,1.); +#384372 = DIRECTION('',(0.,0.,1.)); +#384373 = ORIENTED_EDGE('',*,*,#384374,.F.); +#384374 = EDGE_CURVE('',#384336,#384367,#384375,.T.); +#384375 = LINE('',#384376,#384377); +#384376 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384377 = VECTOR('',#384378,1.); +#384378 = DIRECTION('',(0.,-1.,0.)); +#384379 = PLANE('',#384380); +#384380 = AXIS2_PLACEMENT_3D('',#384381,#384382,#384383); +#384381 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384382 = DIRECTION('',(1.,0.,-0.)); +#384383 = DIRECTION('',(0.,-1.,0.)); +#384384 = ADVANCED_FACE('',(#384385),#384401,.T.); +#384385 = FACE_BOUND('',#384386,.T.); +#384386 = EDGE_LOOP('',(#384387,#384388,#384394,#384395)); +#384387 = ORIENTED_EDGE('',*,*,#384366,.T.); +#384388 = ORIENTED_EDGE('',*,*,#384389,.T.); +#384389 = EDGE_CURVE('',#384359,#384289,#384390,.T.); +#384390 = LINE('',#384391,#384392); +#384391 = CARTESIAN_POINT('',(136.95,-71.42,1.55)); +#384392 = VECTOR('',#384393,1.); +#384393 = DIRECTION('',(-1.,0.,0.)); +#384394 = ORIENTED_EDGE('',*,*,#384286,.F.); +#384395 = ORIENTED_EDGE('',*,*,#384396,.F.); +#384396 = EDGE_CURVE('',#384367,#384287,#384397,.T.); +#384397 = LINE('',#384398,#384399); +#384398 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384399 = VECTOR('',#384400,1.); +#384400 = DIRECTION('',(-1.,0.,0.)); +#384401 = PLANE('',#384402); +#384402 = AXIS2_PLACEMENT_3D('',#384403,#384404,#384405); +#384403 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384404 = DIRECTION('',(0.,-1.,0.)); +#384405 = DIRECTION('',(-1.,0.,0.)); +#384406 = ADVANCED_FACE('',(#384407),#384413,.F.); +#384407 = FACE_BOUND('',#384408,.T.); +#384408 = EDGE_LOOP('',(#384409,#384410,#384411,#384412)); +#384409 = ORIENTED_EDGE('',*,*,#384312,.T.); +#384410 = ORIENTED_EDGE('',*,*,#384343,.T.); +#384411 = ORIENTED_EDGE('',*,*,#384374,.T.); +#384412 = ORIENTED_EDGE('',*,*,#384396,.T.); +#384413 = PLANE('',#384414); +#384414 = AXIS2_PLACEMENT_3D('',#384415,#384416,#384417); +#384415 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384416 = DIRECTION('',(0.,0.,1.)); +#384417 = DIRECTION('',(1.,0.,-0.)); +#384418 = ADVANCED_FACE('',(#384419),#384425,.T.); +#384419 = FACE_BOUND('',#384420,.F.); +#384420 = EDGE_LOOP('',(#384421,#384422,#384423,#384424)); +#384421 = ORIENTED_EDGE('',*,*,#384296,.T.); +#384422 = ORIENTED_EDGE('',*,*,#384327,.T.); +#384423 = ORIENTED_EDGE('',*,*,#384358,.T.); +#384424 = ORIENTED_EDGE('',*,*,#384389,.T.); +#384425 = PLANE('',#384426); +#384426 = AXIS2_PLACEMENT_3D('',#384427,#384428,#384429); +#384427 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384428 = DIRECTION('',(0.,0.,1.)); +#384429 = DIRECTION('',(1.,0.,-0.)); +#384430 = MANIFOLD_SOLID_BREP('',#384431); +#384431 = CLOSED_SHELL('',(#384432,#384472,#384503,#384534,#384556, + #384568)); +#384432 = ADVANCED_FACE('',(#384433),#384467,.T.); +#384433 = FACE_BOUND('',#384434,.T.); +#384434 = EDGE_LOOP('',(#384435,#384445,#384453,#384461)); +#384435 = ORIENTED_EDGE('',*,*,#384436,.T.); +#384436 = EDGE_CURVE('',#384437,#384439,#384441,.T.); +#384437 = VERTEX_POINT('',#384438); +#384438 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384439 = VERTEX_POINT('',#384440); +#384440 = CARTESIAN_POINT('',(136.05,-71.42,1.55)); +#384441 = LINE('',#384442,#384443); +#384442 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384443 = VECTOR('',#384444,1.); +#384444 = DIRECTION('',(0.,0.,1.)); +#384445 = ORIENTED_EDGE('',*,*,#384446,.T.); +#384446 = EDGE_CURVE('',#384439,#384447,#384449,.T.); +#384447 = VERTEX_POINT('',#384448); +#384448 = CARTESIAN_POINT('',(136.05,-70.52,1.55)); +#384449 = LINE('',#384450,#384451); +#384450 = CARTESIAN_POINT('',(136.05,-71.42,1.55)); +#384451 = VECTOR('',#384452,1.); +#384452 = DIRECTION('',(0.,1.,0.)); +#384453 = ORIENTED_EDGE('',*,*,#384454,.F.); +#384454 = EDGE_CURVE('',#384455,#384447,#384457,.T.); +#384455 = VERTEX_POINT('',#384456); +#384456 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384457 = LINE('',#384458,#384459); +#384458 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384459 = VECTOR('',#384460,1.); +#384460 = DIRECTION('',(0.,0.,1.)); +#384461 = ORIENTED_EDGE('',*,*,#384462,.F.); +#384462 = EDGE_CURVE('',#384437,#384455,#384463,.T.); +#384463 = LINE('',#384464,#384465); +#384464 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384465 = VECTOR('',#384466,1.); +#384466 = DIRECTION('',(0.,1.,0.)); +#384467 = PLANE('',#384468); +#384468 = AXIS2_PLACEMENT_3D('',#384469,#384470,#384471); +#384469 = CARTESIAN_POINT('',(136.05,-71.42,1.51)); +#384470 = DIRECTION('',(-1.,0.,0.)); +#384471 = DIRECTION('',(0.,1.,0.)); +#384472 = ADVANCED_FACE('',(#384473),#384498,.T.); +#384473 = FACE_BOUND('',#384474,.T.); +#384474 = EDGE_LOOP('',(#384475,#384476,#384484,#384492)); +#384475 = ORIENTED_EDGE('',*,*,#384454,.T.); +#384476 = ORIENTED_EDGE('',*,*,#384477,.T.); +#384477 = EDGE_CURVE('',#384447,#384478,#384480,.T.); +#384478 = VERTEX_POINT('',#384479); +#384479 = CARTESIAN_POINT('',(136.95,-70.52,1.55)); +#384480 = LINE('',#384481,#384482); +#384481 = CARTESIAN_POINT('',(136.05,-70.52,1.55)); +#384482 = VECTOR('',#384483,1.); +#384483 = DIRECTION('',(1.,0.,0.)); +#384484 = ORIENTED_EDGE('',*,*,#384485,.F.); +#384485 = EDGE_CURVE('',#384486,#384478,#384488,.T.); +#384486 = VERTEX_POINT('',#384487); +#384487 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384488 = LINE('',#384489,#384490); +#384489 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384490 = VECTOR('',#384491,1.); +#384491 = DIRECTION('',(0.,0.,1.)); +#384492 = ORIENTED_EDGE('',*,*,#384493,.F.); +#384493 = EDGE_CURVE('',#384455,#384486,#384494,.T.); +#384494 = LINE('',#384495,#384496); +#384495 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384496 = VECTOR('',#384497,1.); +#384497 = DIRECTION('',(1.,0.,0.)); +#384498 = PLANE('',#384499); +#384499 = AXIS2_PLACEMENT_3D('',#384500,#384501,#384502); +#384500 = CARTESIAN_POINT('',(136.05,-70.52,1.51)); +#384501 = DIRECTION('',(0.,1.,0.)); +#384502 = DIRECTION('',(1.,0.,0.)); +#384503 = ADVANCED_FACE('',(#384504),#384529,.T.); +#384504 = FACE_BOUND('',#384505,.T.); +#384505 = EDGE_LOOP('',(#384506,#384507,#384515,#384523)); +#384506 = ORIENTED_EDGE('',*,*,#384485,.T.); +#384507 = ORIENTED_EDGE('',*,*,#384508,.T.); +#384508 = EDGE_CURVE('',#384478,#384509,#384511,.T.); +#384509 = VERTEX_POINT('',#384510); +#384510 = CARTESIAN_POINT('',(136.95,-71.42,1.55)); +#384511 = LINE('',#384512,#384513); +#384512 = CARTESIAN_POINT('',(136.95,-70.52,1.55)); +#384513 = VECTOR('',#384514,1.); +#384514 = DIRECTION('',(0.,-1.,0.)); +#384515 = ORIENTED_EDGE('',*,*,#384516,.F.); +#384516 = EDGE_CURVE('',#384517,#384509,#384519,.T.); +#384517 = VERTEX_POINT('',#384518); +#384518 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384519 = LINE('',#384520,#384521); +#384520 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384521 = VECTOR('',#384522,1.); +#384522 = DIRECTION('',(0.,0.,1.)); +#384523 = ORIENTED_EDGE('',*,*,#384524,.F.); +#384524 = EDGE_CURVE('',#384486,#384517,#384525,.T.); +#384525 = LINE('',#384526,#384527); +#384526 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384527 = VECTOR('',#384528,1.); +#384528 = DIRECTION('',(0.,-1.,0.)); +#384529 = PLANE('',#384530); +#384530 = AXIS2_PLACEMENT_3D('',#384531,#384532,#384533); +#384531 = CARTESIAN_POINT('',(136.95,-70.52,1.51)); +#384532 = DIRECTION('',(1.,0.,-0.)); +#384533 = DIRECTION('',(0.,-1.,0.)); +#384534 = ADVANCED_FACE('',(#384535),#384551,.T.); +#384535 = FACE_BOUND('',#384536,.T.); +#384536 = EDGE_LOOP('',(#384537,#384538,#384544,#384545)); +#384537 = ORIENTED_EDGE('',*,*,#384516,.T.); +#384538 = ORIENTED_EDGE('',*,*,#384539,.T.); +#384539 = EDGE_CURVE('',#384509,#384439,#384540,.T.); +#384540 = LINE('',#384541,#384542); +#384541 = CARTESIAN_POINT('',(136.95,-71.42,1.55)); +#384542 = VECTOR('',#384543,1.); +#384543 = DIRECTION('',(-1.,0.,0.)); +#384544 = ORIENTED_EDGE('',*,*,#384436,.F.); +#384545 = ORIENTED_EDGE('',*,*,#384546,.F.); +#384546 = EDGE_CURVE('',#384517,#384437,#384547,.T.); +#384547 = LINE('',#384548,#384549); +#384548 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384549 = VECTOR('',#384550,1.); +#384550 = DIRECTION('',(-1.,0.,0.)); +#384551 = PLANE('',#384552); +#384552 = AXIS2_PLACEMENT_3D('',#384553,#384554,#384555); +#384553 = CARTESIAN_POINT('',(136.95,-71.42,1.51)); +#384554 = DIRECTION('',(0.,-1.,0.)); +#384555 = DIRECTION('',(-1.,0.,0.)); +#384556 = ADVANCED_FACE('',(#384557),#384563,.F.); +#384557 = FACE_BOUND('',#384558,.T.); +#384558 = EDGE_LOOP('',(#384559,#384560,#384561,#384562)); +#384559 = ORIENTED_EDGE('',*,*,#384462,.T.); +#384560 = ORIENTED_EDGE('',*,*,#384493,.T.); +#384561 = ORIENTED_EDGE('',*,*,#384524,.T.); +#384562 = ORIENTED_EDGE('',*,*,#384546,.T.); +#384563 = PLANE('',#384564); +#384564 = AXIS2_PLACEMENT_3D('',#384565,#384566,#384567); +#384565 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384566 = DIRECTION('',(0.,0.,1.)); +#384567 = DIRECTION('',(1.,0.,-0.)); +#384568 = ADVANCED_FACE('',(#384569),#384575,.T.); +#384569 = FACE_BOUND('',#384570,.F.); +#384570 = EDGE_LOOP('',(#384571,#384572,#384573,#384574)); +#384571 = ORIENTED_EDGE('',*,*,#384446,.T.); +#384572 = ORIENTED_EDGE('',*,*,#384477,.T.); +#384573 = ORIENTED_EDGE('',*,*,#384508,.T.); +#384574 = ORIENTED_EDGE('',*,*,#384539,.T.); +#384575 = PLANE('',#384576); +#384576 = AXIS2_PLACEMENT_3D('',#384577,#384578,#384579); +#384577 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384578 = DIRECTION('',(0.,0.,1.)); +#384579 = DIRECTION('',(1.,0.,-0.)); +#384580 = MANIFOLD_SOLID_BREP('',#384581); +#384581 = CLOSED_SHELL('',(#384582,#384622,#384653,#384684,#384706, + #384718)); +#384582 = ADVANCED_FACE('',(#384583),#384617,.T.); +#384583 = FACE_BOUND('',#384584,.T.); +#384584 = EDGE_LOOP('',(#384585,#384595,#384603,#384611)); +#384585 = ORIENTED_EDGE('',*,*,#384586,.T.); +#384586 = EDGE_CURVE('',#384587,#384589,#384591,.T.); +#384587 = VERTEX_POINT('',#384588); +#384588 = CARTESIAN_POINT('',(136.05,-72.82,1.51)); +#384589 = VERTEX_POINT('',#384590); +#384590 = CARTESIAN_POINT('',(136.05,-72.82,1.55)); +#384591 = LINE('',#384592,#384593); +#384592 = CARTESIAN_POINT('',(136.05,-72.82,1.51)); +#384593 = VECTOR('',#384594,1.); +#384594 = DIRECTION('',(0.,0.,1.)); +#384595 = ORIENTED_EDGE('',*,*,#384596,.T.); +#384596 = EDGE_CURVE('',#384589,#384597,#384599,.T.); +#384597 = VERTEX_POINT('',#384598); +#384598 = CARTESIAN_POINT('',(136.05,-71.92,1.55)); +#384599 = LINE('',#384600,#384601); +#384600 = CARTESIAN_POINT('',(136.05,-72.82,1.55)); +#384601 = VECTOR('',#384602,1.); +#384602 = DIRECTION('',(0.,1.,0.)); +#384603 = ORIENTED_EDGE('',*,*,#384604,.F.); +#384604 = EDGE_CURVE('',#384605,#384597,#384607,.T.); +#384605 = VERTEX_POINT('',#384606); +#384606 = CARTESIAN_POINT('',(136.05,-71.92,1.51)); +#384607 = LINE('',#384608,#384609); +#384608 = CARTESIAN_POINT('',(136.05,-71.92,1.51)); +#384609 = VECTOR('',#384610,1.); +#384610 = DIRECTION('',(0.,0.,1.)); +#384611 = ORIENTED_EDGE('',*,*,#384612,.F.); +#384612 = EDGE_CURVE('',#384587,#384605,#384613,.T.); +#384613 = LINE('',#384614,#384615); +#384614 = CARTESIAN_POINT('',(136.05,-72.82,1.51)); +#384615 = VECTOR('',#384616,1.); +#384616 = DIRECTION('',(0.,1.,0.)); +#384617 = PLANE('',#384618); +#384618 = AXIS2_PLACEMENT_3D('',#384619,#384620,#384621); +#384619 = CARTESIAN_POINT('',(136.05,-72.82,1.51)); +#384620 = DIRECTION('',(-1.,0.,0.)); +#384621 = DIRECTION('',(0.,1.,0.)); +#384622 = ADVANCED_FACE('',(#384623),#384648,.T.); +#384623 = FACE_BOUND('',#384624,.T.); +#384624 = EDGE_LOOP('',(#384625,#384626,#384634,#384642)); +#384625 = ORIENTED_EDGE('',*,*,#384604,.T.); +#384626 = ORIENTED_EDGE('',*,*,#384627,.T.); +#384627 = EDGE_CURVE('',#384597,#384628,#384630,.T.); +#384628 = VERTEX_POINT('',#384629); +#384629 = CARTESIAN_POINT('',(136.95,-71.92,1.55)); +#384630 = LINE('',#384631,#384632); +#384631 = CARTESIAN_POINT('',(136.05,-71.92,1.55)); +#384632 = VECTOR('',#384633,1.); +#384633 = DIRECTION('',(1.,0.,0.)); +#384634 = ORIENTED_EDGE('',*,*,#384635,.F.); +#384635 = EDGE_CURVE('',#384636,#384628,#384638,.T.); +#384636 = VERTEX_POINT('',#384637); +#384637 = CARTESIAN_POINT('',(136.95,-71.92,1.51)); +#384638 = LINE('',#384639,#384640); +#384639 = CARTESIAN_POINT('',(136.95,-71.92,1.51)); +#384640 = VECTOR('',#384641,1.); +#384641 = DIRECTION('',(0.,0.,1.)); +#384642 = ORIENTED_EDGE('',*,*,#384643,.F.); +#384643 = EDGE_CURVE('',#384605,#384636,#384644,.T.); +#384644 = LINE('',#384645,#384646); +#384645 = CARTESIAN_POINT('',(136.05,-71.92,1.51)); +#384646 = VECTOR('',#384647,1.); +#384647 = DIRECTION('',(1.,0.,0.)); +#384648 = PLANE('',#384649); +#384649 = AXIS2_PLACEMENT_3D('',#384650,#384651,#384652); +#384650 = CARTESIAN_POINT('',(136.05,-71.92,1.51)); +#384651 = DIRECTION('',(0.,1.,0.)); +#384652 = DIRECTION('',(1.,0.,0.)); +#384653 = ADVANCED_FACE('',(#384654),#384679,.T.); +#384654 = FACE_BOUND('',#384655,.T.); +#384655 = EDGE_LOOP('',(#384656,#384657,#384665,#384673)); +#384656 = ORIENTED_EDGE('',*,*,#384635,.T.); +#384657 = ORIENTED_EDGE('',*,*,#384658,.T.); +#384658 = EDGE_CURVE('',#384628,#384659,#384661,.T.); +#384659 = VERTEX_POINT('',#384660); +#384660 = CARTESIAN_POINT('',(136.95,-72.82,1.55)); +#384661 = LINE('',#384662,#384663); +#384662 = CARTESIAN_POINT('',(136.95,-71.92,1.55)); +#384663 = VECTOR('',#384664,1.); +#384664 = DIRECTION('',(0.,-1.,0.)); +#384665 = ORIENTED_EDGE('',*,*,#384666,.F.); +#384666 = EDGE_CURVE('',#384667,#384659,#384669,.T.); +#384667 = VERTEX_POINT('',#384668); +#384668 = CARTESIAN_POINT('',(136.95,-72.82,1.51)); +#384669 = LINE('',#384670,#384671); +#384670 = CARTESIAN_POINT('',(136.95,-72.82,1.51)); +#384671 = VECTOR('',#384672,1.); +#384672 = DIRECTION('',(0.,0.,1.)); +#384673 = ORIENTED_EDGE('',*,*,#384674,.F.); +#384674 = EDGE_CURVE('',#384636,#384667,#384675,.T.); +#384675 = LINE('',#384676,#384677); +#384676 = CARTESIAN_POINT('',(136.95,-71.92,1.51)); +#384677 = VECTOR('',#384678,1.); +#384678 = DIRECTION('',(0.,-1.,0.)); +#384679 = PLANE('',#384680); +#384680 = AXIS2_PLACEMENT_3D('',#384681,#384682,#384683); +#384681 = CARTESIAN_POINT('',(136.95,-71.92,1.51)); +#384682 = DIRECTION('',(1.,0.,-0.)); +#384683 = DIRECTION('',(0.,-1.,0.)); +#384684 = ADVANCED_FACE('',(#384685),#384701,.T.); +#384685 = FACE_BOUND('',#384686,.T.); +#384686 = EDGE_LOOP('',(#384687,#384688,#384694,#384695)); +#384687 = ORIENTED_EDGE('',*,*,#384666,.T.); +#384688 = ORIENTED_EDGE('',*,*,#384689,.T.); +#384689 = EDGE_CURVE('',#384659,#384589,#384690,.T.); +#384690 = LINE('',#384691,#384692); +#384691 = CARTESIAN_POINT('',(136.95,-72.82,1.55)); +#384692 = VECTOR('',#384693,1.); +#384693 = DIRECTION('',(-1.,0.,0.)); +#384694 = ORIENTED_EDGE('',*,*,#384586,.F.); +#384695 = ORIENTED_EDGE('',*,*,#384696,.F.); +#384696 = EDGE_CURVE('',#384667,#384587,#384697,.T.); +#384697 = LINE('',#384698,#384699); +#384698 = CARTESIAN_POINT('',(136.95,-72.82,1.51)); +#384699 = VECTOR('',#384700,1.); +#384700 = DIRECTION('',(-1.,0.,0.)); +#384701 = PLANE('',#384702); +#384702 = AXIS2_PLACEMENT_3D('',#384703,#384704,#384705); +#384703 = CARTESIAN_POINT('',(136.95,-72.82,1.51)); +#384704 = DIRECTION('',(0.,-1.,0.)); +#384705 = DIRECTION('',(-1.,0.,0.)); +#384706 = ADVANCED_FACE('',(#384707),#384713,.F.); +#384707 = FACE_BOUND('',#384708,.T.); +#384708 = EDGE_LOOP('',(#384709,#384710,#384711,#384712)); +#384709 = ORIENTED_EDGE('',*,*,#384612,.T.); +#384710 = ORIENTED_EDGE('',*,*,#384643,.T.); +#384711 = ORIENTED_EDGE('',*,*,#384674,.T.); +#384712 = ORIENTED_EDGE('',*,*,#384696,.T.); +#384713 = PLANE('',#384714); +#384714 = AXIS2_PLACEMENT_3D('',#384715,#384716,#384717); +#384715 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384716 = DIRECTION('',(0.,0.,1.)); +#384717 = DIRECTION('',(1.,0.,-0.)); +#384718 = ADVANCED_FACE('',(#384719),#384725,.T.); +#384719 = FACE_BOUND('',#384720,.F.); +#384720 = EDGE_LOOP('',(#384721,#384722,#384723,#384724)); +#384721 = ORIENTED_EDGE('',*,*,#384596,.T.); +#384722 = ORIENTED_EDGE('',*,*,#384627,.T.); +#384723 = ORIENTED_EDGE('',*,*,#384658,.T.); +#384724 = ORIENTED_EDGE('',*,*,#384689,.T.); +#384725 = PLANE('',#384726); +#384726 = AXIS2_PLACEMENT_3D('',#384727,#384728,#384729); +#384727 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384728 = DIRECTION('',(0.,0.,1.)); +#384729 = DIRECTION('',(1.,0.,-0.)); +#384730 = MANIFOLD_SOLID_BREP('',#384731); +#384731 = CLOSED_SHELL('',(#384732,#384772,#384803,#384834,#384856, + #384868)); +#384732 = ADVANCED_FACE('',(#384733),#384767,.T.); +#384733 = FACE_BOUND('',#384734,.T.); +#384734 = EDGE_LOOP('',(#384735,#384745,#384753,#384761)); +#384735 = ORIENTED_EDGE('',*,*,#384736,.T.); +#384736 = EDGE_CURVE('',#384737,#384739,#384741,.T.); +#384737 = VERTEX_POINT('',#384738); +#384738 = CARTESIAN_POINT('',(136.05,-74.22,1.51)); +#384739 = VERTEX_POINT('',#384740); +#384740 = CARTESIAN_POINT('',(136.05,-74.22,1.55)); +#384741 = LINE('',#384742,#384743); +#384742 = CARTESIAN_POINT('',(136.05,-74.22,1.51)); +#384743 = VECTOR('',#384744,1.); +#384744 = DIRECTION('',(0.,0.,1.)); +#384745 = ORIENTED_EDGE('',*,*,#384746,.T.); +#384746 = EDGE_CURVE('',#384739,#384747,#384749,.T.); +#384747 = VERTEX_POINT('',#384748); +#384748 = CARTESIAN_POINT('',(136.05,-73.32,1.55)); +#384749 = LINE('',#384750,#384751); +#384750 = CARTESIAN_POINT('',(136.05,-74.22,1.55)); +#384751 = VECTOR('',#384752,1.); +#384752 = DIRECTION('',(0.,1.,0.)); +#384753 = ORIENTED_EDGE('',*,*,#384754,.F.); +#384754 = EDGE_CURVE('',#384755,#384747,#384757,.T.); +#384755 = VERTEX_POINT('',#384756); +#384756 = CARTESIAN_POINT('',(136.05,-73.32,1.51)); +#384757 = LINE('',#384758,#384759); +#384758 = CARTESIAN_POINT('',(136.05,-73.32,1.51)); +#384759 = VECTOR('',#384760,1.); +#384760 = DIRECTION('',(0.,0.,1.)); +#384761 = ORIENTED_EDGE('',*,*,#384762,.F.); +#384762 = EDGE_CURVE('',#384737,#384755,#384763,.T.); +#384763 = LINE('',#384764,#384765); +#384764 = CARTESIAN_POINT('',(136.05,-74.22,1.51)); +#384765 = VECTOR('',#384766,1.); +#384766 = DIRECTION('',(0.,1.,0.)); +#384767 = PLANE('',#384768); +#384768 = AXIS2_PLACEMENT_3D('',#384769,#384770,#384771); +#384769 = CARTESIAN_POINT('',(136.05,-74.22,1.51)); +#384770 = DIRECTION('',(-1.,0.,0.)); +#384771 = DIRECTION('',(0.,1.,0.)); +#384772 = ADVANCED_FACE('',(#384773),#384798,.T.); +#384773 = FACE_BOUND('',#384774,.T.); +#384774 = EDGE_LOOP('',(#384775,#384776,#384784,#384792)); +#384775 = ORIENTED_EDGE('',*,*,#384754,.T.); +#384776 = ORIENTED_EDGE('',*,*,#384777,.T.); +#384777 = EDGE_CURVE('',#384747,#384778,#384780,.T.); +#384778 = VERTEX_POINT('',#384779); +#384779 = CARTESIAN_POINT('',(136.95,-73.32,1.55)); +#384780 = LINE('',#384781,#384782); +#384781 = CARTESIAN_POINT('',(136.05,-73.32,1.55)); +#384782 = VECTOR('',#384783,1.); +#384783 = DIRECTION('',(1.,0.,0.)); +#384784 = ORIENTED_EDGE('',*,*,#384785,.F.); +#384785 = EDGE_CURVE('',#384786,#384778,#384788,.T.); +#384786 = VERTEX_POINT('',#384787); +#384787 = CARTESIAN_POINT('',(136.95,-73.32,1.51)); +#384788 = LINE('',#384789,#384790); +#384789 = CARTESIAN_POINT('',(136.95,-73.32,1.51)); +#384790 = VECTOR('',#384791,1.); +#384791 = DIRECTION('',(0.,0.,1.)); +#384792 = ORIENTED_EDGE('',*,*,#384793,.F.); +#384793 = EDGE_CURVE('',#384755,#384786,#384794,.T.); +#384794 = LINE('',#384795,#384796); +#384795 = CARTESIAN_POINT('',(136.05,-73.32,1.51)); +#384796 = VECTOR('',#384797,1.); +#384797 = DIRECTION('',(1.,0.,0.)); +#384798 = PLANE('',#384799); +#384799 = AXIS2_PLACEMENT_3D('',#384800,#384801,#384802); +#384800 = CARTESIAN_POINT('',(136.05,-73.32,1.51)); +#384801 = DIRECTION('',(0.,1.,0.)); +#384802 = DIRECTION('',(1.,0.,0.)); +#384803 = ADVANCED_FACE('',(#384804),#384829,.T.); +#384804 = FACE_BOUND('',#384805,.T.); +#384805 = EDGE_LOOP('',(#384806,#384807,#384815,#384823)); +#384806 = ORIENTED_EDGE('',*,*,#384785,.T.); +#384807 = ORIENTED_EDGE('',*,*,#384808,.T.); +#384808 = EDGE_CURVE('',#384778,#384809,#384811,.T.); +#384809 = VERTEX_POINT('',#384810); +#384810 = CARTESIAN_POINT('',(136.95,-74.22,1.55)); +#384811 = LINE('',#384812,#384813); +#384812 = CARTESIAN_POINT('',(136.95,-73.32,1.55)); +#384813 = VECTOR('',#384814,1.); +#384814 = DIRECTION('',(0.,-1.,0.)); +#384815 = ORIENTED_EDGE('',*,*,#384816,.F.); +#384816 = EDGE_CURVE('',#384817,#384809,#384819,.T.); +#384817 = VERTEX_POINT('',#384818); +#384818 = CARTESIAN_POINT('',(136.95,-74.22,1.51)); +#384819 = LINE('',#384820,#384821); +#384820 = CARTESIAN_POINT('',(136.95,-74.22,1.51)); +#384821 = VECTOR('',#384822,1.); +#384822 = DIRECTION('',(0.,0.,1.)); +#384823 = ORIENTED_EDGE('',*,*,#384824,.F.); +#384824 = EDGE_CURVE('',#384786,#384817,#384825,.T.); +#384825 = LINE('',#384826,#384827); +#384826 = CARTESIAN_POINT('',(136.95,-73.32,1.51)); +#384827 = VECTOR('',#384828,1.); +#384828 = DIRECTION('',(0.,-1.,0.)); +#384829 = PLANE('',#384830); +#384830 = AXIS2_PLACEMENT_3D('',#384831,#384832,#384833); +#384831 = CARTESIAN_POINT('',(136.95,-73.32,1.51)); +#384832 = DIRECTION('',(1.,0.,-0.)); +#384833 = DIRECTION('',(0.,-1.,0.)); +#384834 = ADVANCED_FACE('',(#384835),#384851,.T.); +#384835 = FACE_BOUND('',#384836,.T.); +#384836 = EDGE_LOOP('',(#384837,#384838,#384844,#384845)); +#384837 = ORIENTED_EDGE('',*,*,#384816,.T.); +#384838 = ORIENTED_EDGE('',*,*,#384839,.T.); +#384839 = EDGE_CURVE('',#384809,#384739,#384840,.T.); +#384840 = LINE('',#384841,#384842); +#384841 = CARTESIAN_POINT('',(136.95,-74.22,1.55)); +#384842 = VECTOR('',#384843,1.); +#384843 = DIRECTION('',(-1.,0.,0.)); +#384844 = ORIENTED_EDGE('',*,*,#384736,.F.); +#384845 = ORIENTED_EDGE('',*,*,#384846,.F.); +#384846 = EDGE_CURVE('',#384817,#384737,#384847,.T.); +#384847 = LINE('',#384848,#384849); +#384848 = CARTESIAN_POINT('',(136.95,-74.22,1.51)); +#384849 = VECTOR('',#384850,1.); +#384850 = DIRECTION('',(-1.,0.,0.)); +#384851 = PLANE('',#384852); +#384852 = AXIS2_PLACEMENT_3D('',#384853,#384854,#384855); +#384853 = CARTESIAN_POINT('',(136.95,-74.22,1.51)); +#384854 = DIRECTION('',(0.,-1.,0.)); +#384855 = DIRECTION('',(-1.,0.,0.)); +#384856 = ADVANCED_FACE('',(#384857),#384863,.F.); +#384857 = FACE_BOUND('',#384858,.T.); +#384858 = EDGE_LOOP('',(#384859,#384860,#384861,#384862)); +#384859 = ORIENTED_EDGE('',*,*,#384762,.T.); +#384860 = ORIENTED_EDGE('',*,*,#384793,.T.); +#384861 = ORIENTED_EDGE('',*,*,#384824,.T.); +#384862 = ORIENTED_EDGE('',*,*,#384846,.T.); +#384863 = PLANE('',#384864); +#384864 = AXIS2_PLACEMENT_3D('',#384865,#384866,#384867); +#384865 = CARTESIAN_POINT('',(0.,0.,1.51)); +#384866 = DIRECTION('',(0.,0.,1.)); +#384867 = DIRECTION('',(1.,0.,-0.)); +#384868 = ADVANCED_FACE('',(#384869),#384875,.T.); +#384869 = FACE_BOUND('',#384870,.F.); +#384870 = EDGE_LOOP('',(#384871,#384872,#384873,#384874)); +#384871 = ORIENTED_EDGE('',*,*,#384746,.T.); +#384872 = ORIENTED_EDGE('',*,*,#384777,.T.); +#384873 = ORIENTED_EDGE('',*,*,#384808,.T.); +#384874 = ORIENTED_EDGE('',*,*,#384839,.T.); +#384875 = PLANE('',#384876); +#384876 = AXIS2_PLACEMENT_3D('',#384877,#384878,#384879); +#384877 = CARTESIAN_POINT('',(0.,0.,1.55)); +#384878 = DIRECTION('',(0.,0.,1.)); +#384879 = DIRECTION('',(1.,0.,-0.)); +#384880 = MANIFOLD_SOLID_BREP('',#384881); +#384881 = CLOSED_SHELL('',(#384882,#384922,#384953,#384984,#385006, + #385018)); +#384882 = ADVANCED_FACE('',(#384883),#384917,.T.); +#384883 = FACE_BOUND('',#384884,.T.); +#384884 = EDGE_LOOP('',(#384885,#384895,#384903,#384911)); +#384885 = ORIENTED_EDGE('',*,*,#384886,.T.); +#384886 = EDGE_CURVE('',#384887,#384889,#384891,.T.); +#384887 = VERTEX_POINT('',#384888); +#384888 = CARTESIAN_POINT('',(137.45,-71.42,1.51)); +#384889 = VERTEX_POINT('',#384890); +#384890 = CARTESIAN_POINT('',(137.45,-71.42,1.55)); +#384891 = LINE('',#384892,#384893); +#384892 = CARTESIAN_POINT('',(137.45,-71.42,1.51)); +#384893 = VECTOR('',#384894,1.); +#384894 = DIRECTION('',(0.,0.,1.)); +#384895 = ORIENTED_EDGE('',*,*,#384896,.T.); +#384896 = EDGE_CURVE('',#384889,#384897,#384899,.T.); +#384897 = VERTEX_POINT('',#384898); +#384898 = CARTESIAN_POINT('',(137.45,-70.52,1.55)); +#384899 = LINE('',#384900,#384901); +#384900 = CARTESIAN_POINT('',(137.45,-71.42,1.55)); +#384901 = VECTOR('',#384902,1.); +#384902 = DIRECTION('',(0.,1.,0.)); +#384903 = ORIENTED_EDGE('',*,*,#384904,.F.); +#384904 = EDGE_CURVE('',#384905,#384897,#384907,.T.); +#384905 = VERTEX_POINT('',#384906); +#384906 = CARTESIAN_POINT('',(137.45,-70.52,1.51)); +#384907 = LINE('',#384908,#384909); +#384908 = CARTESIAN_POINT('',(137.45,-70.52,1.51)); +#384909 = VECTOR('',#384910,1.); +#384910 = DIRECTION('',(0.,0.,1.)); +#384911 = ORIENTED_EDGE('',*,*,#384912,.F.); +#384912 = EDGE_CURVE('',#384887,#384905,#384913,.T.); +#384913 = LINE('',#384914,#384915); +#384914 = CARTESIAN_POINT('',(137.45,-71.42,1.51)); +#384915 = VECTOR('',#384916,1.); +#384916 = DIRECTION('',(0.,1.,0.)); +#384917 = PLANE('',#384918); +#384918 = AXIS2_PLACEMENT_3D('',#384919,#384920,#384921); +#384919 = CARTESIAN_POINT('',(137.45,-71.42,1.51)); +#384920 = DIRECTION('',(-1.,0.,0.)); +#384921 = DIRECTION('',(0.,1.,0.)); +#384922 = ADVANCED_FACE('',(#384923),#384948,.T.); +#384923 = FACE_BOUND('',#384924,.T.); +#384924 = EDGE_LOOP('',(#384925,#384926,#384934,#384942)); +#384925 = ORIENTED_EDGE('',*,*,#384904,.T.); +#384926 = ORIENTED_EDGE('',*,*,#384927,.T.); +#384927 = EDGE_CURVE('',#384897,#384928,#384930,.T.); +#384928 = VERTEX_POINT('',#384929); +#384929 = CARTESIAN_POINT('',(138.35,-70.52,1.55)); +#384930 = LINE('',#384931,#384932); +#384931 = CARTESIAN_POINT('',(137.45,-70.52,1.55)); +#384932 = VECTOR('',#384933,1.); +#384933 = DIRECTION('',(1.,0.,0.)); +#384934 = ORIENTED_EDGE('',*,*,#384935,.F.); +#384935 = EDGE_CURVE('',#384936,#384928,#384938,.T.); +#384936 = VERTEX_POINT('',#384937); +#384937 = CARTESIAN_POINT('',(138.35,-70.52,1.51)); +#384938 = LINE('',#384939,#384940); +#384939 = CARTESIAN_POINT('',(138.35,-70.52,1.51)); +#384940 = VECTOR('',#384941,1.); +#384941 = DIRECTION('',(0.,0.,1.)); +#384942 = ORIENTED_EDGE('',*,*,#384943,.F.); +#384943 = EDGE_CURVE('',#384905,#384936,#384944,.T.); +#384944 = LINE('',#384945,#384946); +#384945 = CARTESIAN_POINT('',(137.45,-70.52,1.51)); +#384946 = VECTOR('',#384947,1.); +#384947 = DIRECTION('',(1.,0.,0.)); +#384948 = PLANE('',#384949); +#384949 = AXIS2_PLACEMENT_3D('',#384950,#384951,#384952); +#384950 = CARTESIAN_POINT('',(137.45,-70.52,1.51)); +#384951 = DIRECTION('',(0.,1.,0.)); +#384952 = DIRECTION('',(1.,0.,0.)); +#384953 = ADVANCED_FACE('',(#384954),#384979,.T.); +#384954 = FACE_BOUND('',#384955,.T.); +#384955 = EDGE_LOOP('',(#384956,#384957,#384965,#384973)); +#384956 = ORIENTED_EDGE('',*,*,#384935,.T.); +#384957 = ORIENTED_EDGE('',*,*,#384958,.T.); +#384958 = EDGE_CURVE('',#384928,#384959,#384961,.T.); +#384959 = VERTEX_POINT('',#384960); +#384960 = CARTESIAN_POINT('',(138.35,-71.42,1.55)); +#384961 = LINE('',#384962,#384963); +#384962 = CARTESIAN_POINT('',(138.35,-70.52,1.55)); +#384963 = VECTOR('',#384964,1.); +#384964 = DIRECTION('',(0.,-1.,0.)); +#384965 = ORIENTED_EDGE('',*,*,#384966,.F.); +#384966 = EDGE_CURVE('',#384967,#384959,#384969,.T.); +#384967 = VERTEX_POINT('',#384968); +#384968 = CARTESIAN_POINT('',(138.35,-71.42,1.51)); +#384969 = LINE('',#384970,#384971); +#384970 = CARTESIAN_POINT('',(138.35,-71.42,1.51)); +#384971 = VECTOR('',#384972,1.); +#384972 = DIRECTION('',(0.,0.,1.)); +#384973 = ORIENTED_EDGE('',*,*,#384974,.F.); +#384974 = EDGE_CURVE('',#384936,#384967,#384975,.T.); +#384975 = LINE('',#384976,#384977); +#384976 = CARTESIAN_POINT('',(138.35,-70.52,1.51)); +#384977 = VECTOR('',#384978,1.); +#384978 = DIRECTION('',(0.,-1.,0.)); +#384979 = PLANE('',#384980); +#384980 = AXIS2_PLACEMENT_3D('',#384981,#384982,#384983); +#384981 = CARTESIAN_POINT('',(138.35,-70.52,1.51)); +#384982 = DIRECTION('',(1.,0.,-0.)); +#384983 = DIRECTION('',(0.,-1.,0.)); +#384984 = ADVANCED_FACE('',(#384985),#385001,.T.); +#384985 = FACE_BOUND('',#384986,.T.); +#384986 = EDGE_LOOP('',(#384987,#384988,#384994,#384995)); +#384987 = ORIENTED_EDGE('',*,*,#384966,.T.); +#384988 = ORIENTED_EDGE('',*,*,#384989,.T.); +#384989 = EDGE_CURVE('',#384959,#384889,#384990,.T.); +#384990 = LINE('',#384991,#384992); +#384991 = CARTESIAN_POINT('',(138.35,-71.42,1.55)); +#384992 = VECTOR('',#384993,1.); +#384993 = DIRECTION('',(-1.,0.,0.)); +#384994 = ORIENTED_EDGE('',*,*,#384886,.F.); +#384995 = ORIENTED_EDGE('',*,*,#384996,.F.); +#384996 = EDGE_CURVE('',#384967,#384887,#384997,.T.); +#384997 = LINE('',#384998,#384999); +#384998 = CARTESIAN_POINT('',(138.35,-71.42,1.51)); +#384999 = VECTOR('',#385000,1.); +#385000 = DIRECTION('',(-1.,0.,0.)); +#385001 = PLANE('',#385002); +#385002 = AXIS2_PLACEMENT_3D('',#385003,#385004,#385005); +#385003 = CARTESIAN_POINT('',(138.35,-71.42,1.51)); +#385004 = DIRECTION('',(0.,-1.,0.)); +#385005 = DIRECTION('',(-1.,0.,0.)); +#385006 = ADVANCED_FACE('',(#385007),#385013,.F.); +#385007 = FACE_BOUND('',#385008,.T.); +#385008 = EDGE_LOOP('',(#385009,#385010,#385011,#385012)); +#385009 = ORIENTED_EDGE('',*,*,#384912,.T.); +#385010 = ORIENTED_EDGE('',*,*,#384943,.T.); +#385011 = ORIENTED_EDGE('',*,*,#384974,.T.); +#385012 = ORIENTED_EDGE('',*,*,#384996,.T.); +#385013 = PLANE('',#385014); +#385014 = AXIS2_PLACEMENT_3D('',#385015,#385016,#385017); +#385015 = CARTESIAN_POINT('',(0.,0.,1.51)); +#385016 = DIRECTION('',(0.,0.,1.)); +#385017 = DIRECTION('',(1.,0.,-0.)); +#385018 = ADVANCED_FACE('',(#385019),#385025,.T.); +#385019 = FACE_BOUND('',#385020,.F.); +#385020 = EDGE_LOOP('',(#385021,#385022,#385023,#385024)); +#385021 = ORIENTED_EDGE('',*,*,#384896,.T.); +#385022 = ORIENTED_EDGE('',*,*,#384927,.T.); +#385023 = ORIENTED_EDGE('',*,*,#384958,.T.); +#385024 = ORIENTED_EDGE('',*,*,#384989,.T.); +#385025 = PLANE('',#385026); +#385026 = AXIS2_PLACEMENT_3D('',#385027,#385028,#385029); +#385027 = CARTESIAN_POINT('',(0.,0.,1.55)); +#385028 = DIRECTION('',(0.,0.,1.)); +#385029 = DIRECTION('',(1.,0.,-0.)); +#385030 = MANIFOLD_SOLID_BREP('',#385031); +#385031 = CLOSED_SHELL('',(#385032,#385072,#385103,#385134,#385156, + #385168)); +#385032 = ADVANCED_FACE('',(#385033),#385067,.T.); +#385033 = FACE_BOUND('',#385034,.T.); +#385034 = EDGE_LOOP('',(#385035,#385045,#385053,#385061)); +#385035 = ORIENTED_EDGE('',*,*,#385036,.T.); +#385036 = EDGE_CURVE('',#385037,#385039,#385041,.T.); +#385037 = VERTEX_POINT('',#385038); +#385038 = CARTESIAN_POINT('',(137.45,-72.82,1.51)); +#385039 = VERTEX_POINT('',#385040); +#385040 = CARTESIAN_POINT('',(137.45,-72.82,1.55)); +#385041 = LINE('',#385042,#385043); +#385042 = CARTESIAN_POINT('',(137.45,-72.82,1.51)); +#385043 = VECTOR('',#385044,1.); +#385044 = DIRECTION('',(0.,0.,1.)); +#385045 = ORIENTED_EDGE('',*,*,#385046,.T.); +#385046 = EDGE_CURVE('',#385039,#385047,#385049,.T.); +#385047 = VERTEX_POINT('',#385048); +#385048 = CARTESIAN_POINT('',(137.45,-71.92,1.55)); +#385049 = LINE('',#385050,#385051); +#385050 = CARTESIAN_POINT('',(137.45,-72.82,1.55)); +#385051 = VECTOR('',#385052,1.); +#385052 = DIRECTION('',(0.,1.,0.)); +#385053 = ORIENTED_EDGE('',*,*,#385054,.F.); +#385054 = EDGE_CURVE('',#385055,#385047,#385057,.T.); +#385055 = VERTEX_POINT('',#385056); +#385056 = CARTESIAN_POINT('',(137.45,-71.92,1.51)); +#385057 = LINE('',#385058,#385059); +#385058 = CARTESIAN_POINT('',(137.45,-71.92,1.51)); +#385059 = VECTOR('',#385060,1.); +#385060 = DIRECTION('',(0.,0.,1.)); +#385061 = ORIENTED_EDGE('',*,*,#385062,.F.); +#385062 = EDGE_CURVE('',#385037,#385055,#385063,.T.); +#385063 = LINE('',#385064,#385065); +#385064 = CARTESIAN_POINT('',(137.45,-72.82,1.51)); +#385065 = VECTOR('',#385066,1.); +#385066 = DIRECTION('',(0.,1.,0.)); +#385067 = PLANE('',#385068); +#385068 = AXIS2_PLACEMENT_3D('',#385069,#385070,#385071); +#385069 = CARTESIAN_POINT('',(137.45,-72.82,1.51)); +#385070 = DIRECTION('',(-1.,0.,0.)); +#385071 = DIRECTION('',(0.,1.,0.)); +#385072 = ADVANCED_FACE('',(#385073),#385098,.T.); +#385073 = FACE_BOUND('',#385074,.T.); +#385074 = EDGE_LOOP('',(#385075,#385076,#385084,#385092)); +#385075 = ORIENTED_EDGE('',*,*,#385054,.T.); +#385076 = ORIENTED_EDGE('',*,*,#385077,.T.); +#385077 = EDGE_CURVE('',#385047,#385078,#385080,.T.); +#385078 = VERTEX_POINT('',#385079); +#385079 = CARTESIAN_POINT('',(138.35,-71.92,1.55)); +#385080 = LINE('',#385081,#385082); +#385081 = CARTESIAN_POINT('',(137.45,-71.92,1.55)); +#385082 = VECTOR('',#385083,1.); +#385083 = DIRECTION('',(1.,0.,0.)); +#385084 = ORIENTED_EDGE('',*,*,#385085,.F.); +#385085 = EDGE_CURVE('',#385086,#385078,#385088,.T.); +#385086 = VERTEX_POINT('',#385087); +#385087 = CARTESIAN_POINT('',(138.35,-71.92,1.51)); +#385088 = LINE('',#385089,#385090); +#385089 = CARTESIAN_POINT('',(138.35,-71.92,1.51)); +#385090 = VECTOR('',#385091,1.); +#385091 = DIRECTION('',(0.,0.,1.)); +#385092 = ORIENTED_EDGE('',*,*,#385093,.F.); +#385093 = EDGE_CURVE('',#385055,#385086,#385094,.T.); +#385094 = LINE('',#385095,#385096); +#385095 = CARTESIAN_POINT('',(137.45,-71.92,1.51)); +#385096 = VECTOR('',#385097,1.); +#385097 = DIRECTION('',(1.,0.,0.)); +#385098 = PLANE('',#385099); +#385099 = AXIS2_PLACEMENT_3D('',#385100,#385101,#385102); +#385100 = CARTESIAN_POINT('',(137.45,-71.92,1.51)); +#385101 = DIRECTION('',(0.,1.,0.)); +#385102 = DIRECTION('',(1.,0.,0.)); +#385103 = ADVANCED_FACE('',(#385104),#385129,.T.); +#385104 = FACE_BOUND('',#385105,.T.); +#385105 = EDGE_LOOP('',(#385106,#385107,#385115,#385123)); +#385106 = ORIENTED_EDGE('',*,*,#385085,.T.); +#385107 = ORIENTED_EDGE('',*,*,#385108,.T.); +#385108 = EDGE_CURVE('',#385078,#385109,#385111,.T.); +#385109 = VERTEX_POINT('',#385110); +#385110 = CARTESIAN_POINT('',(138.35,-72.82,1.55)); +#385111 = LINE('',#385112,#385113); +#385112 = CARTESIAN_POINT('',(138.35,-71.92,1.55)); +#385113 = VECTOR('',#385114,1.); +#385114 = DIRECTION('',(0.,-1.,0.)); +#385115 = ORIENTED_EDGE('',*,*,#385116,.F.); +#385116 = EDGE_CURVE('',#385117,#385109,#385119,.T.); +#385117 = VERTEX_POINT('',#385118); +#385118 = CARTESIAN_POINT('',(138.35,-72.82,1.51)); +#385119 = LINE('',#385120,#385121); +#385120 = CARTESIAN_POINT('',(138.35,-72.82,1.51)); +#385121 = VECTOR('',#385122,1.); +#385122 = DIRECTION('',(0.,0.,1.)); +#385123 = ORIENTED_EDGE('',*,*,#385124,.F.); +#385124 = EDGE_CURVE('',#385086,#385117,#385125,.T.); +#385125 = LINE('',#385126,#385127); +#385126 = CARTESIAN_POINT('',(138.35,-71.92,1.51)); +#385127 = VECTOR('',#385128,1.); +#385128 = DIRECTION('',(0.,-1.,0.)); +#385129 = PLANE('',#385130); +#385130 = AXIS2_PLACEMENT_3D('',#385131,#385132,#385133); +#385131 = CARTESIAN_POINT('',(138.35,-71.92,1.51)); +#385132 = DIRECTION('',(1.,0.,-0.)); +#385133 = DIRECTION('',(0.,-1.,0.)); +#385134 = ADVANCED_FACE('',(#385135),#385151,.T.); +#385135 = FACE_BOUND('',#385136,.T.); +#385136 = EDGE_LOOP('',(#385137,#385138,#385144,#385145)); +#385137 = ORIENTED_EDGE('',*,*,#385116,.T.); +#385138 = ORIENTED_EDGE('',*,*,#385139,.T.); +#385139 = EDGE_CURVE('',#385109,#385039,#385140,.T.); +#385140 = LINE('',#385141,#385142); +#385141 = CARTESIAN_POINT('',(138.35,-72.82,1.55)); +#385142 = VECTOR('',#385143,1.); +#385143 = DIRECTION('',(-1.,0.,0.)); +#385144 = ORIENTED_EDGE('',*,*,#385036,.F.); +#385145 = ORIENTED_EDGE('',*,*,#385146,.F.); +#385146 = EDGE_CURVE('',#385117,#385037,#385147,.T.); +#385147 = LINE('',#385148,#385149); +#385148 = CARTESIAN_POINT('',(138.35,-72.82,1.51)); +#385149 = VECTOR('',#385150,1.); +#385150 = DIRECTION('',(-1.,0.,0.)); +#385151 = PLANE('',#385152); +#385152 = AXIS2_PLACEMENT_3D('',#385153,#385154,#385155); +#385153 = CARTESIAN_POINT('',(138.35,-72.82,1.51)); +#385154 = DIRECTION('',(0.,-1.,0.)); +#385155 = DIRECTION('',(-1.,0.,0.)); +#385156 = ADVANCED_FACE('',(#385157),#385163,.F.); +#385157 = FACE_BOUND('',#385158,.T.); +#385158 = EDGE_LOOP('',(#385159,#385160,#385161,#385162)); +#385159 = ORIENTED_EDGE('',*,*,#385062,.T.); +#385160 = ORIENTED_EDGE('',*,*,#385093,.T.); +#385161 = ORIENTED_EDGE('',*,*,#385124,.T.); +#385162 = ORIENTED_EDGE('',*,*,#385146,.T.); +#385163 = PLANE('',#385164); +#385164 = AXIS2_PLACEMENT_3D('',#385165,#385166,#385167); +#385165 = CARTESIAN_POINT('',(0.,0.,1.51)); +#385166 = DIRECTION('',(0.,0.,1.)); +#385167 = DIRECTION('',(1.,0.,-0.)); +#385168 = ADVANCED_FACE('',(#385169),#385175,.T.); +#385169 = FACE_BOUND('',#385170,.F.); +#385170 = EDGE_LOOP('',(#385171,#385172,#385173,#385174)); +#385171 = ORIENTED_EDGE('',*,*,#385046,.T.); +#385172 = ORIENTED_EDGE('',*,*,#385077,.T.); +#385173 = ORIENTED_EDGE('',*,*,#385108,.T.); +#385174 = ORIENTED_EDGE('',*,*,#385139,.T.); +#385175 = PLANE('',#385176); +#385176 = AXIS2_PLACEMENT_3D('',#385177,#385178,#385179); +#385177 = CARTESIAN_POINT('',(0.,0.,1.55)); +#385178 = DIRECTION('',(0.,0.,1.)); +#385179 = DIRECTION('',(1.,0.,-0.)); +#385180 = MANIFOLD_SOLID_BREP('',#385181); +#385181 = CLOSED_SHELL('',(#385182,#385222,#385253,#385284,#385306, + #385318)); +#385182 = ADVANCED_FACE('',(#385183),#385217,.T.); +#385183 = FACE_BOUND('',#385184,.T.); +#385184 = EDGE_LOOP('',(#385185,#385195,#385203,#385211)); +#385185 = ORIENTED_EDGE('',*,*,#385186,.T.); +#385186 = EDGE_CURVE('',#385187,#385189,#385191,.T.); +#385187 = VERTEX_POINT('',#385188); +#385188 = CARTESIAN_POINT('',(137.45,-74.22,1.51)); +#385189 = VERTEX_POINT('',#385190); +#385190 = CARTESIAN_POINT('',(137.45,-74.22,1.55)); +#385191 = LINE('',#385192,#385193); +#385192 = CARTESIAN_POINT('',(137.45,-74.22,1.51)); +#385193 = VECTOR('',#385194,1.); +#385194 = DIRECTION('',(0.,0.,1.)); +#385195 = ORIENTED_EDGE('',*,*,#385196,.T.); +#385196 = EDGE_CURVE('',#385189,#385197,#385199,.T.); +#385197 = VERTEX_POINT('',#385198); +#385198 = CARTESIAN_POINT('',(137.45,-73.32,1.55)); +#385199 = LINE('',#385200,#385201); +#385200 = CARTESIAN_POINT('',(137.45,-74.22,1.55)); +#385201 = VECTOR('',#385202,1.); +#385202 = DIRECTION('',(0.,1.,0.)); +#385203 = ORIENTED_EDGE('',*,*,#385204,.F.); +#385204 = EDGE_CURVE('',#385205,#385197,#385207,.T.); +#385205 = VERTEX_POINT('',#385206); +#385206 = CARTESIAN_POINT('',(137.45,-73.32,1.51)); +#385207 = LINE('',#385208,#385209); +#385208 = CARTESIAN_POINT('',(137.45,-73.32,1.51)); +#385209 = VECTOR('',#385210,1.); +#385210 = DIRECTION('',(0.,0.,1.)); +#385211 = ORIENTED_EDGE('',*,*,#385212,.F.); +#385212 = EDGE_CURVE('',#385187,#385205,#385213,.T.); +#385213 = LINE('',#385214,#385215); +#385214 = CARTESIAN_POINT('',(137.45,-74.22,1.51)); +#385215 = VECTOR('',#385216,1.); +#385216 = DIRECTION('',(0.,1.,0.)); +#385217 = PLANE('',#385218); +#385218 = AXIS2_PLACEMENT_3D('',#385219,#385220,#385221); +#385219 = CARTESIAN_POINT('',(137.45,-74.22,1.51)); +#385220 = DIRECTION('',(-1.,0.,0.)); +#385221 = DIRECTION('',(0.,1.,0.)); +#385222 = ADVANCED_FACE('',(#385223),#385248,.T.); +#385223 = FACE_BOUND('',#385224,.T.); +#385224 = EDGE_LOOP('',(#385225,#385226,#385234,#385242)); +#385225 = ORIENTED_EDGE('',*,*,#385204,.T.); +#385226 = ORIENTED_EDGE('',*,*,#385227,.T.); +#385227 = EDGE_CURVE('',#385197,#385228,#385230,.T.); +#385228 = VERTEX_POINT('',#385229); +#385229 = CARTESIAN_POINT('',(138.35,-73.32,1.55)); +#385230 = LINE('',#385231,#385232); +#385231 = CARTESIAN_POINT('',(137.45,-73.32,1.55)); +#385232 = VECTOR('',#385233,1.); +#385233 = DIRECTION('',(1.,0.,0.)); +#385234 = ORIENTED_EDGE('',*,*,#385235,.F.); +#385235 = EDGE_CURVE('',#385236,#385228,#385238,.T.); +#385236 = VERTEX_POINT('',#385237); +#385237 = CARTESIAN_POINT('',(138.35,-73.32,1.51)); +#385238 = LINE('',#385239,#385240); +#385239 = CARTESIAN_POINT('',(138.35,-73.32,1.51)); +#385240 = VECTOR('',#385241,1.); +#385241 = DIRECTION('',(0.,0.,1.)); +#385242 = ORIENTED_EDGE('',*,*,#385243,.F.); +#385243 = EDGE_CURVE('',#385205,#385236,#385244,.T.); +#385244 = LINE('',#385245,#385246); +#385245 = CARTESIAN_POINT('',(137.45,-73.32,1.51)); +#385246 = VECTOR('',#385247,1.); +#385247 = DIRECTION('',(1.,0.,0.)); +#385248 = PLANE('',#385249); +#385249 = AXIS2_PLACEMENT_3D('',#385250,#385251,#385252); +#385250 = CARTESIAN_POINT('',(137.45,-73.32,1.51)); +#385251 = DIRECTION('',(0.,1.,0.)); +#385252 = DIRECTION('',(1.,0.,0.)); +#385253 = ADVANCED_FACE('',(#385254),#385279,.T.); +#385254 = FACE_BOUND('',#385255,.T.); +#385255 = EDGE_LOOP('',(#385256,#385257,#385265,#385273)); +#385256 = ORIENTED_EDGE('',*,*,#385235,.T.); +#385257 = ORIENTED_EDGE('',*,*,#385258,.T.); +#385258 = EDGE_CURVE('',#385228,#385259,#385261,.T.); +#385259 = VERTEX_POINT('',#385260); +#385260 = CARTESIAN_POINT('',(138.35,-74.22,1.55)); +#385261 = LINE('',#385262,#385263); +#385262 = CARTESIAN_POINT('',(138.35,-73.32,1.55)); +#385263 = VECTOR('',#385264,1.); +#385264 = DIRECTION('',(0.,-1.,0.)); +#385265 = ORIENTED_EDGE('',*,*,#385266,.F.); +#385266 = EDGE_CURVE('',#385267,#385259,#385269,.T.); +#385267 = VERTEX_POINT('',#385268); +#385268 = CARTESIAN_POINT('',(138.35,-74.22,1.51)); +#385269 = LINE('',#385270,#385271); +#385270 = CARTESIAN_POINT('',(138.35,-74.22,1.51)); +#385271 = VECTOR('',#385272,1.); +#385272 = DIRECTION('',(0.,0.,1.)); +#385273 = ORIENTED_EDGE('',*,*,#385274,.F.); +#385274 = EDGE_CURVE('',#385236,#385267,#385275,.T.); +#385275 = LINE('',#385276,#385277); +#385276 = CARTESIAN_POINT('',(138.35,-73.32,1.51)); +#385277 = VECTOR('',#385278,1.); +#385278 = DIRECTION('',(0.,-1.,0.)); +#385279 = PLANE('',#385280); +#385280 = AXIS2_PLACEMENT_3D('',#385281,#385282,#385283); +#385281 = CARTESIAN_POINT('',(138.35,-73.32,1.51)); +#385282 = DIRECTION('',(1.,0.,-0.)); +#385283 = DIRECTION('',(0.,-1.,0.)); +#385284 = ADVANCED_FACE('',(#385285),#385301,.T.); +#385285 = FACE_BOUND('',#385286,.T.); +#385286 = EDGE_LOOP('',(#385287,#385288,#385294,#385295)); +#385287 = ORIENTED_EDGE('',*,*,#385266,.T.); +#385288 = ORIENTED_EDGE('',*,*,#385289,.T.); +#385289 = EDGE_CURVE('',#385259,#385189,#385290,.T.); +#385290 = LINE('',#385291,#385292); +#385291 = CARTESIAN_POINT('',(138.35,-74.22,1.55)); +#385292 = VECTOR('',#385293,1.); +#385293 = DIRECTION('',(-1.,0.,0.)); +#385294 = ORIENTED_EDGE('',*,*,#385186,.F.); +#385295 = ORIENTED_EDGE('',*,*,#385296,.F.); +#385296 = EDGE_CURVE('',#385267,#385187,#385297,.T.); +#385297 = LINE('',#385298,#385299); +#385298 = CARTESIAN_POINT('',(138.35,-74.22,1.51)); +#385299 = VECTOR('',#385300,1.); +#385300 = DIRECTION('',(-1.,0.,0.)); +#385301 = PLANE('',#385302); +#385302 = AXIS2_PLACEMENT_3D('',#385303,#385304,#385305); +#385303 = CARTESIAN_POINT('',(138.35,-74.22,1.51)); +#385304 = DIRECTION('',(0.,-1.,0.)); +#385305 = DIRECTION('',(-1.,0.,0.)); +#385306 = ADVANCED_FACE('',(#385307),#385313,.F.); +#385307 = FACE_BOUND('',#385308,.T.); +#385308 = EDGE_LOOP('',(#385309,#385310,#385311,#385312)); +#385309 = ORIENTED_EDGE('',*,*,#385212,.T.); +#385310 = ORIENTED_EDGE('',*,*,#385243,.T.); +#385311 = ORIENTED_EDGE('',*,*,#385274,.T.); +#385312 = ORIENTED_EDGE('',*,*,#385296,.T.); +#385313 = PLANE('',#385314); +#385314 = AXIS2_PLACEMENT_3D('',#385315,#385316,#385317); +#385315 = CARTESIAN_POINT('',(0.,0.,1.51)); +#385316 = DIRECTION('',(0.,0.,1.)); +#385317 = DIRECTION('',(1.,0.,-0.)); +#385318 = ADVANCED_FACE('',(#385319),#385325,.T.); +#385319 = FACE_BOUND('',#385320,.F.); +#385320 = EDGE_LOOP('',(#385321,#385322,#385323,#385324)); +#385321 = ORIENTED_EDGE('',*,*,#385196,.T.); +#385322 = ORIENTED_EDGE('',*,*,#385227,.T.); +#385323 = ORIENTED_EDGE('',*,*,#385258,.T.); +#385324 = ORIENTED_EDGE('',*,*,#385289,.T.); +#385325 = PLANE('',#385326); +#385326 = AXIS2_PLACEMENT_3D('',#385327,#385328,#385329); +#385327 = CARTESIAN_POINT('',(0.,0.,1.55)); +#385328 = DIRECTION('',(0.,0.,1.)); +#385329 = DIRECTION('',(1.,0.,-0.)); +#385330 = MANIFOLD_SOLID_BREP('',#385331); +#385331 = CLOSED_SHELL('',(#385332,#385374,#385405,#385438,#385469, + #385502,#385533,#385566,#385588,#385604)); +#385332 = ADVANCED_FACE('',(#385333),#385369,.T.); +#385333 = FACE_BOUND('',#385334,.T.); +#385334 = EDGE_LOOP('',(#385335,#385345,#385354,#385362)); +#385335 = ORIENTED_EDGE('',*,*,#385336,.T.); +#385336 = EDGE_CURVE('',#385337,#385339,#385341,.T.); +#385337 = VERTEX_POINT('',#385338); +#385338 = CARTESIAN_POINT('',(121.75,-90.35,1.51)); +#385339 = VERTEX_POINT('',#385340); +#385340 = CARTESIAN_POINT('',(121.75,-90.35,1.55)); +#385341 = LINE('',#385342,#385343); +#385342 = CARTESIAN_POINT('',(121.75,-90.35,1.51)); +#385343 = VECTOR('',#385344,1.); +#385344 = DIRECTION('',(0.,0.,1.)); +#385345 = ORIENTED_EDGE('',*,*,#385346,.T.); +#385346 = EDGE_CURVE('',#385339,#385347,#385349,.T.); +#385347 = VERTEX_POINT('',#385348); +#385348 = CARTESIAN_POINT('',(121.9,-90.2,1.55)); +#385349 = CIRCLE('',#385350,0.150000058649); +#385350 = AXIS2_PLACEMENT_3D('',#385351,#385352,#385353); +#385351 = CARTESIAN_POINT('',(121.90000005864,-90.35000005864,1.55)); +#385352 = DIRECTION('',(0.,0.,-1.)); +#385353 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#385354 = ORIENTED_EDGE('',*,*,#385355,.F.); +#385355 = EDGE_CURVE('',#385356,#385347,#385358,.T.); +#385356 = VERTEX_POINT('',#385357); +#385357 = CARTESIAN_POINT('',(121.9,-90.2,1.51)); +#385358 = LINE('',#385359,#385360); +#385359 = CARTESIAN_POINT('',(121.9,-90.2,1.51)); +#385360 = VECTOR('',#385361,1.); +#385361 = DIRECTION('',(0.,0.,1.)); +#385362 = ORIENTED_EDGE('',*,*,#385363,.F.); +#385363 = EDGE_CURVE('',#385337,#385356,#385364,.T.); +#385364 = CIRCLE('',#385365,0.150000058649); +#385365 = AXIS2_PLACEMENT_3D('',#385366,#385367,#385368); +#385366 = CARTESIAN_POINT('',(121.90000005864,-90.35000005864,1.51)); +#385367 = DIRECTION('',(0.,0.,-1.)); +#385368 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#385369 = CYLINDRICAL_SURFACE('',#385370,0.150000058649); +#385370 = AXIS2_PLACEMENT_3D('',#385371,#385372,#385373); +#385371 = CARTESIAN_POINT('',(121.90000005864,-90.35000005864,1.51)); +#385372 = DIRECTION('',(0.,0.,-1.)); +#385373 = DIRECTION('',(-1.,3.90995314237E-07,0.)); +#385374 = ADVANCED_FACE('',(#385375),#385400,.T.); +#385375 = FACE_BOUND('',#385376,.T.); +#385376 = EDGE_LOOP('',(#385377,#385378,#385386,#385394)); +#385377 = ORIENTED_EDGE('',*,*,#385355,.T.); +#385378 = ORIENTED_EDGE('',*,*,#385379,.T.); +#385379 = EDGE_CURVE('',#385347,#385380,#385382,.T.); +#385380 = VERTEX_POINT('',#385381); +#385381 = CARTESIAN_POINT('',(123.4,-90.2,1.55)); +#385382 = LINE('',#385383,#385384); +#385383 = CARTESIAN_POINT('',(121.9,-90.2,1.55)); +#385384 = VECTOR('',#385385,1.); +#385385 = DIRECTION('',(1.,0.,0.)); +#385386 = ORIENTED_EDGE('',*,*,#385387,.F.); +#385387 = EDGE_CURVE('',#385388,#385380,#385390,.T.); +#385388 = VERTEX_POINT('',#385389); +#385389 = CARTESIAN_POINT('',(123.4,-90.2,1.51)); +#385390 = LINE('',#385391,#385392); +#385391 = CARTESIAN_POINT('',(123.4,-90.2,1.51)); +#385392 = VECTOR('',#385393,1.); +#385393 = DIRECTION('',(0.,0.,1.)); +#385394 = ORIENTED_EDGE('',*,*,#385395,.F.); +#385395 = EDGE_CURVE('',#385356,#385388,#385396,.T.); +#385396 = LINE('',#385397,#385398); +#385397 = CARTESIAN_POINT('',(121.9,-90.2,1.51)); +#385398 = VECTOR('',#385399,1.); +#385399 = DIRECTION('',(1.,0.,0.)); +#385400 = PLANE('',#385401); +#385401 = AXIS2_PLACEMENT_3D('',#385402,#385403,#385404); +#385402 = CARTESIAN_POINT('',(121.9,-90.2,1.51)); +#385403 = DIRECTION('',(0.,1.,0.)); +#385404 = DIRECTION('',(1.,0.,0.)); +#385405 = ADVANCED_FACE('',(#385406),#385433,.T.); +#385406 = FACE_BOUND('',#385407,.T.); +#385407 = EDGE_LOOP('',(#385408,#385409,#385418,#385426)); +#385408 = ORIENTED_EDGE('',*,*,#385387,.T.); +#385409 = ORIENTED_EDGE('',*,*,#385410,.T.); +#385410 = EDGE_CURVE('',#385380,#385411,#385413,.T.); +#385411 = VERTEX_POINT('',#385412); +#385412 = CARTESIAN_POINT('',(123.55,-90.35,1.55)); +#385413 = CIRCLE('',#385414,0.150000058649); +#385414 = AXIS2_PLACEMENT_3D('',#385415,#385416,#385417); +#385415 = CARTESIAN_POINT('',(123.39999994135,-90.35000005864,1.55)); +#385416 = DIRECTION('',(0.,0.,-1.)); +#385417 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#385418 = ORIENTED_EDGE('',*,*,#385419,.F.); +#385419 = EDGE_CURVE('',#385420,#385411,#385422,.T.); +#385420 = VERTEX_POINT('',#385421); +#385421 = CARTESIAN_POINT('',(123.55,-90.35,1.51)); +#385422 = LINE('',#385423,#385424); +#385423 = CARTESIAN_POINT('',(123.55,-90.35,1.51)); +#385424 = VECTOR('',#385425,1.); +#385425 = DIRECTION('',(0.,0.,1.)); +#385426 = ORIENTED_EDGE('',*,*,#385427,.F.); +#385427 = EDGE_CURVE('',#385388,#385420,#385428,.T.); +#385428 = CIRCLE('',#385429,0.150000058649); +#385429 = AXIS2_PLACEMENT_3D('',#385430,#385431,#385432); +#385430 = CARTESIAN_POINT('',(123.39999994135,-90.35000005864,1.51)); +#385431 = DIRECTION('',(0.,0.,-1.)); +#385432 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#385433 = CYLINDRICAL_SURFACE('',#385434,0.150000058649); +#385434 = AXIS2_PLACEMENT_3D('',#385435,#385436,#385437); +#385435 = CARTESIAN_POINT('',(123.39999994135,-90.35000005864,1.51)); +#385436 = DIRECTION('',(0.,0.,-1.)); +#385437 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#385438 = ADVANCED_FACE('',(#385439),#385464,.T.); +#385439 = FACE_BOUND('',#385440,.T.); +#385440 = EDGE_LOOP('',(#385441,#385442,#385450,#385458)); +#385441 = ORIENTED_EDGE('',*,*,#385419,.T.); +#385442 = ORIENTED_EDGE('',*,*,#385443,.T.); +#385443 = EDGE_CURVE('',#385411,#385444,#385446,.T.); +#385444 = VERTEX_POINT('',#385445); +#385445 = CARTESIAN_POINT('',(123.55,-90.65,1.55)); +#385446 = LINE('',#385447,#385448); +#385447 = CARTESIAN_POINT('',(123.55,-90.35,1.55)); +#385448 = VECTOR('',#385449,1.); +#385449 = DIRECTION('',(0.,-1.,0.)); +#385450 = ORIENTED_EDGE('',*,*,#385451,.F.); +#385451 = EDGE_CURVE('',#385452,#385444,#385454,.T.); +#385452 = VERTEX_POINT('',#385453); +#385453 = CARTESIAN_POINT('',(123.55,-90.65,1.51)); +#385454 = LINE('',#385455,#385456); +#385455 = CARTESIAN_POINT('',(123.55,-90.65,1.51)); +#385456 = VECTOR('',#385457,1.); +#385457 = DIRECTION('',(0.,0.,1.)); +#385458 = ORIENTED_EDGE('',*,*,#385459,.F.); +#385459 = EDGE_CURVE('',#385420,#385452,#385460,.T.); +#385460 = LINE('',#385461,#385462); +#385461 = CARTESIAN_POINT('',(123.55,-90.35,1.51)); +#385462 = VECTOR('',#385463,1.); +#385463 = DIRECTION('',(0.,-1.,0.)); +#385464 = PLANE('',#385465); +#385465 = AXIS2_PLACEMENT_3D('',#385466,#385467,#385468); +#385466 = CARTESIAN_POINT('',(123.55,-90.35,1.51)); +#385467 = DIRECTION('',(1.,0.,-0.)); +#385468 = DIRECTION('',(0.,-1.,0.)); +#385469 = ADVANCED_FACE('',(#385470),#385497,.T.); +#385470 = FACE_BOUND('',#385471,.T.); +#385471 = EDGE_LOOP('',(#385472,#385473,#385482,#385490)); +#385472 = ORIENTED_EDGE('',*,*,#385451,.T.); +#385473 = ORIENTED_EDGE('',*,*,#385474,.T.); +#385474 = EDGE_CURVE('',#385444,#385475,#385477,.T.); +#385475 = VERTEX_POINT('',#385476); +#385476 = CARTESIAN_POINT('',(123.4,-90.8,1.55)); +#385477 = CIRCLE('',#385478,0.150000058649); +#385478 = AXIS2_PLACEMENT_3D('',#385479,#385480,#385481); +#385479 = CARTESIAN_POINT('',(123.39999994135,-90.64999994135,1.55)); +#385480 = DIRECTION('',(0.,0.,-1.)); +#385481 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#385482 = ORIENTED_EDGE('',*,*,#385483,.F.); +#385483 = EDGE_CURVE('',#385484,#385475,#385486,.T.); +#385484 = VERTEX_POINT('',#385485); +#385485 = CARTESIAN_POINT('',(123.4,-90.8,1.51)); +#385486 = LINE('',#385487,#385488); +#385487 = CARTESIAN_POINT('',(123.4,-90.8,1.51)); +#385488 = VECTOR('',#385489,1.); +#385489 = DIRECTION('',(0.,0.,1.)); +#385490 = ORIENTED_EDGE('',*,*,#385491,.F.); +#385491 = EDGE_CURVE('',#385452,#385484,#385492,.T.); +#385492 = CIRCLE('',#385493,0.150000058649); +#385493 = AXIS2_PLACEMENT_3D('',#385494,#385495,#385496); +#385494 = CARTESIAN_POINT('',(123.39999994135,-90.64999994135,1.51)); +#385495 = DIRECTION('',(0.,0.,-1.)); +#385496 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#385497 = CYLINDRICAL_SURFACE('',#385498,0.150000058649); +#385498 = AXIS2_PLACEMENT_3D('',#385499,#385500,#385501); +#385499 = CARTESIAN_POINT('',(123.39999994135,-90.64999994135,1.51)); +#385500 = DIRECTION('',(0.,0.,-1.)); +#385501 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#385502 = ADVANCED_FACE('',(#385503),#385528,.T.); +#385503 = FACE_BOUND('',#385504,.T.); +#385504 = EDGE_LOOP('',(#385505,#385506,#385514,#385522)); +#385505 = ORIENTED_EDGE('',*,*,#385483,.T.); +#385506 = ORIENTED_EDGE('',*,*,#385507,.T.); +#385507 = EDGE_CURVE('',#385475,#385508,#385510,.T.); +#385508 = VERTEX_POINT('',#385509); +#385509 = CARTESIAN_POINT('',(121.9,-90.8,1.55)); +#385510 = LINE('',#385511,#385512); +#385511 = CARTESIAN_POINT('',(123.4,-90.8,1.55)); +#385512 = VECTOR('',#385513,1.); +#385513 = DIRECTION('',(-1.,0.,0.)); +#385514 = ORIENTED_EDGE('',*,*,#385515,.F.); +#385515 = EDGE_CURVE('',#385516,#385508,#385518,.T.); +#385516 = VERTEX_POINT('',#385517); +#385517 = CARTESIAN_POINT('',(121.9,-90.8,1.51)); +#385518 = LINE('',#385519,#385520); +#385519 = CARTESIAN_POINT('',(121.9,-90.8,1.51)); +#385520 = VECTOR('',#385521,1.); +#385521 = DIRECTION('',(0.,0.,1.)); +#385522 = ORIENTED_EDGE('',*,*,#385523,.F.); +#385523 = EDGE_CURVE('',#385484,#385516,#385524,.T.); +#385524 = LINE('',#385525,#385526); +#385525 = CARTESIAN_POINT('',(123.4,-90.8,1.51)); +#385526 = VECTOR('',#385527,1.); +#385527 = DIRECTION('',(-1.,0.,0.)); +#385528 = PLANE('',#385529); +#385529 = AXIS2_PLACEMENT_3D('',#385530,#385531,#385532); +#385530 = CARTESIAN_POINT('',(123.4,-90.8,1.51)); +#385531 = DIRECTION('',(0.,-1.,0.)); +#385532 = DIRECTION('',(-1.,0.,0.)); +#385533 = ADVANCED_FACE('',(#385534),#385561,.T.); +#385534 = FACE_BOUND('',#385535,.T.); +#385535 = EDGE_LOOP('',(#385536,#385537,#385546,#385554)); +#385536 = ORIENTED_EDGE('',*,*,#385515,.T.); +#385537 = ORIENTED_EDGE('',*,*,#385538,.T.); +#385538 = EDGE_CURVE('',#385508,#385539,#385541,.T.); +#385539 = VERTEX_POINT('',#385540); +#385540 = CARTESIAN_POINT('',(121.75,-90.65,1.55)); +#385541 = CIRCLE('',#385542,0.150000058649); +#385542 = AXIS2_PLACEMENT_3D('',#385543,#385544,#385545); +#385543 = CARTESIAN_POINT('',(121.90000005864,-90.64999994135,1.55)); +#385544 = DIRECTION('',(0.,0.,-1.)); +#385545 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#385546 = ORIENTED_EDGE('',*,*,#385547,.F.); +#385547 = EDGE_CURVE('',#385548,#385539,#385550,.T.); +#385548 = VERTEX_POINT('',#385549); +#385549 = CARTESIAN_POINT('',(121.75,-90.65,1.51)); +#385550 = LINE('',#385551,#385552); +#385551 = CARTESIAN_POINT('',(121.75,-90.65,1.51)); +#385552 = VECTOR('',#385553,1.); +#385553 = DIRECTION('',(0.,0.,1.)); +#385554 = ORIENTED_EDGE('',*,*,#385555,.F.); +#385555 = EDGE_CURVE('',#385516,#385548,#385556,.T.); +#385556 = CIRCLE('',#385557,0.150000058649); +#385557 = AXIS2_PLACEMENT_3D('',#385558,#385559,#385560); +#385558 = CARTESIAN_POINT('',(121.90000005864,-90.64999994135,1.51)); +#385559 = DIRECTION('',(0.,0.,-1.)); +#385560 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#385561 = CYLINDRICAL_SURFACE('',#385562,0.150000058649); +#385562 = AXIS2_PLACEMENT_3D('',#385563,#385564,#385565); +#385563 = CARTESIAN_POINT('',(121.90000005864,-90.64999994135,1.51)); +#385564 = DIRECTION('',(0.,0.,-1.)); +#385565 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#385566 = ADVANCED_FACE('',(#385567),#385583,.T.); +#385567 = FACE_BOUND('',#385568,.T.); +#385568 = EDGE_LOOP('',(#385569,#385570,#385576,#385577)); +#385569 = ORIENTED_EDGE('',*,*,#385547,.T.); +#385570 = ORIENTED_EDGE('',*,*,#385571,.T.); +#385571 = EDGE_CURVE('',#385539,#385339,#385572,.T.); +#385572 = LINE('',#385573,#385574); +#385573 = CARTESIAN_POINT('',(121.75,-90.65,1.55)); +#385574 = VECTOR('',#385575,1.); +#385575 = DIRECTION('',(0.,1.,0.)); +#385576 = ORIENTED_EDGE('',*,*,#385336,.F.); +#385577 = ORIENTED_EDGE('',*,*,#385578,.F.); +#385578 = EDGE_CURVE('',#385548,#385337,#385579,.T.); +#385579 = LINE('',#385580,#385581); +#385580 = CARTESIAN_POINT('',(121.75,-90.65,1.51)); +#385581 = VECTOR('',#385582,1.); +#385582 = DIRECTION('',(0.,1.,0.)); +#385583 = PLANE('',#385584); +#385584 = AXIS2_PLACEMENT_3D('',#385585,#385586,#385587); +#385585 = CARTESIAN_POINT('',(121.75,-90.65,1.51)); +#385586 = DIRECTION('',(-1.,0.,0.)); +#385587 = DIRECTION('',(0.,1.,0.)); +#385588 = ADVANCED_FACE('',(#385589),#385599,.F.); +#385589 = FACE_BOUND('',#385590,.T.); +#385590 = EDGE_LOOP('',(#385591,#385592,#385593,#385594,#385595,#385596, + #385597,#385598)); +#385591 = ORIENTED_EDGE('',*,*,#385363,.T.); +#385592 = ORIENTED_EDGE('',*,*,#385395,.T.); +#385593 = ORIENTED_EDGE('',*,*,#385427,.T.); +#385594 = ORIENTED_EDGE('',*,*,#385459,.T.); +#385595 = ORIENTED_EDGE('',*,*,#385491,.T.); +#385596 = ORIENTED_EDGE('',*,*,#385523,.T.); +#385597 = ORIENTED_EDGE('',*,*,#385555,.T.); +#385598 = ORIENTED_EDGE('',*,*,#385578,.T.); +#385599 = PLANE('',#385600); +#385600 = AXIS2_PLACEMENT_3D('',#385601,#385602,#385603); +#385601 = CARTESIAN_POINT('',(0.,0.,1.51)); +#385602 = DIRECTION('',(0.,0.,1.)); +#385603 = DIRECTION('',(1.,0.,-0.)); +#385604 = ADVANCED_FACE('',(#385605),#385615,.T.); +#385605 = FACE_BOUND('',#385606,.F.); +#385606 = EDGE_LOOP('',(#385607,#385608,#385609,#385610,#385611,#385612, + #385613,#385614)); +#385607 = ORIENTED_EDGE('',*,*,#385346,.T.); +#385608 = ORIENTED_EDGE('',*,*,#385379,.T.); +#385609 = ORIENTED_EDGE('',*,*,#385410,.T.); +#385610 = ORIENTED_EDGE('',*,*,#385443,.T.); +#385611 = ORIENTED_EDGE('',*,*,#385474,.T.); +#385612 = ORIENTED_EDGE('',*,*,#385507,.T.); +#385613 = ORIENTED_EDGE('',*,*,#385538,.T.); +#385614 = ORIENTED_EDGE('',*,*,#385571,.T.); +#385615 = PLANE('',#385616); +#385616 = AXIS2_PLACEMENT_3D('',#385617,#385618,#385619); +#385617 = CARTESIAN_POINT('',(0.,0.,1.55)); +#385618 = DIRECTION('',(0.,0.,1.)); +#385619 = DIRECTION('',(1.,0.,-0.)); +#385620 = MANIFOLD_SOLID_BREP('',#385621); +#385621 = CLOSED_SHELL('',(#385622,#385664,#385695,#385728,#385759, + #385792,#385823,#385856,#385878,#385894)); +#385622 = ADVANCED_FACE('',(#385623),#385659,.T.); +#385623 = FACE_BOUND('',#385624,.T.); +#385624 = EDGE_LOOP('',(#385625,#385635,#385644,#385652)); +#385625 = ORIENTED_EDGE('',*,*,#385626,.T.); +#385626 = EDGE_CURVE('',#385627,#385629,#385631,.T.); +#385627 = VERTEX_POINT('',#385628); +#385628 = CARTESIAN_POINT('',(146.75,-157.2,1.51)); +#385629 = VERTEX_POINT('',#385630); +#385630 = CARTESIAN_POINT('',(146.75,-157.2,1.55)); +#385631 = LINE('',#385632,#385633); +#385632 = CARTESIAN_POINT('',(146.75,-157.2,1.51)); +#385633 = VECTOR('',#385634,1.); +#385634 = DIRECTION('',(0.,0.,1.)); +#385635 = ORIENTED_EDGE('',*,*,#385636,.T.); +#385636 = EDGE_CURVE('',#385629,#385637,#385639,.T.); +#385637 = VERTEX_POINT('',#385638); +#385638 = CARTESIAN_POINT('',(146.9,-157.05,1.55)); +#385639 = CIRCLE('',#385640,0.150000058649); +#385640 = AXIS2_PLACEMENT_3D('',#385641,#385642,#385643); +#385641 = CARTESIAN_POINT('',(146.90000005864,-157.2000000586,1.55)); +#385642 = DIRECTION('',(0.,0.,-1.)); +#385643 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#385644 = ORIENTED_EDGE('',*,*,#385645,.F.); +#385645 = EDGE_CURVE('',#385646,#385637,#385648,.T.); +#385646 = VERTEX_POINT('',#385647); +#385647 = CARTESIAN_POINT('',(146.9,-157.05,1.51)); +#385648 = LINE('',#385649,#385650); +#385649 = CARTESIAN_POINT('',(146.9,-157.05,1.51)); +#385650 = VECTOR('',#385651,1.); +#385651 = DIRECTION('',(0.,0.,1.)); +#385652 = ORIENTED_EDGE('',*,*,#385653,.F.); +#385653 = EDGE_CURVE('',#385627,#385646,#385654,.T.); +#385654 = CIRCLE('',#385655,0.150000058649); +#385655 = AXIS2_PLACEMENT_3D('',#385656,#385657,#385658); +#385656 = CARTESIAN_POINT('',(146.90000005864,-157.2000000586,1.51)); +#385657 = DIRECTION('',(0.,0.,-1.)); +#385658 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#385659 = CYLINDRICAL_SURFACE('',#385660,0.150000058649); +#385660 = AXIS2_PLACEMENT_3D('',#385661,#385662,#385663); +#385661 = CARTESIAN_POINT('',(146.90000005864,-157.2000000586,1.51)); +#385662 = DIRECTION('',(0.,0.,-1.)); +#385663 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#385664 = ADVANCED_FACE('',(#385665),#385690,.T.); +#385665 = FACE_BOUND('',#385666,.T.); +#385666 = EDGE_LOOP('',(#385667,#385668,#385676,#385684)); +#385667 = ORIENTED_EDGE('',*,*,#385645,.T.); +#385668 = ORIENTED_EDGE('',*,*,#385669,.T.); +#385669 = EDGE_CURVE('',#385637,#385670,#385672,.T.); +#385670 = VERTEX_POINT('',#385671); +#385671 = CARTESIAN_POINT('',(148.1,-157.05,1.55)); +#385672 = LINE('',#385673,#385674); +#385673 = CARTESIAN_POINT('',(146.9,-157.05,1.55)); +#385674 = VECTOR('',#385675,1.); +#385675 = DIRECTION('',(1.,0.,0.)); +#385676 = ORIENTED_EDGE('',*,*,#385677,.F.); +#385677 = EDGE_CURVE('',#385678,#385670,#385680,.T.); +#385678 = VERTEX_POINT('',#385679); +#385679 = CARTESIAN_POINT('',(148.1,-157.05,1.51)); +#385680 = LINE('',#385681,#385682); +#385681 = CARTESIAN_POINT('',(148.1,-157.05,1.51)); +#385682 = VECTOR('',#385683,1.); +#385683 = DIRECTION('',(0.,0.,1.)); +#385684 = ORIENTED_EDGE('',*,*,#385685,.F.); +#385685 = EDGE_CURVE('',#385646,#385678,#385686,.T.); +#385686 = LINE('',#385687,#385688); +#385687 = CARTESIAN_POINT('',(146.9,-157.05,1.51)); +#385688 = VECTOR('',#385689,1.); +#385689 = DIRECTION('',(1.,0.,0.)); +#385690 = PLANE('',#385691); +#385691 = AXIS2_PLACEMENT_3D('',#385692,#385693,#385694); +#385692 = CARTESIAN_POINT('',(146.9,-157.05,1.51)); +#385693 = DIRECTION('',(0.,1.,0.)); +#385694 = DIRECTION('',(1.,0.,0.)); +#385695 = ADVANCED_FACE('',(#385696),#385723,.T.); +#385696 = FACE_BOUND('',#385697,.T.); +#385697 = EDGE_LOOP('',(#385698,#385699,#385708,#385716)); +#385698 = ORIENTED_EDGE('',*,*,#385677,.T.); +#385699 = ORIENTED_EDGE('',*,*,#385700,.T.); +#385700 = EDGE_CURVE('',#385670,#385701,#385703,.T.); +#385701 = VERTEX_POINT('',#385702); +#385702 = CARTESIAN_POINT('',(148.25,-157.2,1.55)); +#385703 = CIRCLE('',#385704,0.150000058649); +#385704 = AXIS2_PLACEMENT_3D('',#385705,#385706,#385707); +#385705 = CARTESIAN_POINT('',(148.09999994135,-157.2000000586,1.55)); +#385706 = DIRECTION('',(0.,0.,-1.)); +#385707 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#385708 = ORIENTED_EDGE('',*,*,#385709,.F.); +#385709 = EDGE_CURVE('',#385710,#385701,#385712,.T.); +#385710 = VERTEX_POINT('',#385711); +#385711 = CARTESIAN_POINT('',(148.25,-157.2,1.51)); +#385712 = LINE('',#385713,#385714); +#385713 = CARTESIAN_POINT('',(148.25,-157.2,1.51)); +#385714 = VECTOR('',#385715,1.); +#385715 = DIRECTION('',(0.,0.,1.)); +#385716 = ORIENTED_EDGE('',*,*,#385717,.F.); +#385717 = EDGE_CURVE('',#385678,#385710,#385718,.T.); +#385718 = CIRCLE('',#385719,0.150000058649); +#385719 = AXIS2_PLACEMENT_3D('',#385720,#385721,#385722); +#385720 = CARTESIAN_POINT('',(148.09999994135,-157.2000000586,1.51)); +#385721 = DIRECTION('',(0.,0.,-1.)); +#385722 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#385723 = CYLINDRICAL_SURFACE('',#385724,0.150000058649); +#385724 = AXIS2_PLACEMENT_3D('',#385725,#385726,#385727); +#385725 = CARTESIAN_POINT('',(148.09999994135,-157.2000000586,1.51)); +#385726 = DIRECTION('',(0.,0.,-1.)); +#385727 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#385728 = ADVANCED_FACE('',(#385729),#385754,.T.); +#385729 = FACE_BOUND('',#385730,.T.); +#385730 = EDGE_LOOP('',(#385731,#385732,#385740,#385748)); +#385731 = ORIENTED_EDGE('',*,*,#385709,.T.); +#385732 = ORIENTED_EDGE('',*,*,#385733,.T.); +#385733 = EDGE_CURVE('',#385701,#385734,#385736,.T.); +#385734 = VERTEX_POINT('',#385735); +#385735 = CARTESIAN_POINT('',(148.25,-157.9,1.55)); +#385736 = LINE('',#385737,#385738); +#385737 = CARTESIAN_POINT('',(148.25,-157.2,1.55)); +#385738 = VECTOR('',#385739,1.); +#385739 = DIRECTION('',(0.,-1.,0.)); +#385740 = ORIENTED_EDGE('',*,*,#385741,.F.); +#385741 = EDGE_CURVE('',#385742,#385734,#385744,.T.); +#385742 = VERTEX_POINT('',#385743); +#385743 = CARTESIAN_POINT('',(148.25,-157.9,1.51)); +#385744 = LINE('',#385745,#385746); +#385745 = CARTESIAN_POINT('',(148.25,-157.9,1.51)); +#385746 = VECTOR('',#385747,1.); +#385747 = DIRECTION('',(0.,0.,1.)); +#385748 = ORIENTED_EDGE('',*,*,#385749,.F.); +#385749 = EDGE_CURVE('',#385710,#385742,#385750,.T.); +#385750 = LINE('',#385751,#385752); +#385751 = CARTESIAN_POINT('',(148.25,-157.2,1.51)); +#385752 = VECTOR('',#385753,1.); +#385753 = DIRECTION('',(0.,-1.,0.)); +#385754 = PLANE('',#385755); +#385755 = AXIS2_PLACEMENT_3D('',#385756,#385757,#385758); +#385756 = CARTESIAN_POINT('',(148.25,-157.2,1.51)); +#385757 = DIRECTION('',(1.,0.,-0.)); +#385758 = DIRECTION('',(0.,-1.,0.)); +#385759 = ADVANCED_FACE('',(#385760),#385787,.T.); +#385760 = FACE_BOUND('',#385761,.T.); +#385761 = EDGE_LOOP('',(#385762,#385763,#385772,#385780)); +#385762 = ORIENTED_EDGE('',*,*,#385741,.T.); +#385763 = ORIENTED_EDGE('',*,*,#385764,.T.); +#385764 = EDGE_CURVE('',#385734,#385765,#385767,.T.); +#385765 = VERTEX_POINT('',#385766); +#385766 = CARTESIAN_POINT('',(148.1,-158.05,1.55)); +#385767 = CIRCLE('',#385768,0.150000058649); +#385768 = AXIS2_PLACEMENT_3D('',#385769,#385770,#385771); +#385769 = CARTESIAN_POINT('',(148.09999994135,-157.8999999413,1.55)); +#385770 = DIRECTION('',(0.,0.,-1.)); +#385771 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#385772 = ORIENTED_EDGE('',*,*,#385773,.F.); +#385773 = EDGE_CURVE('',#385774,#385765,#385776,.T.); +#385774 = VERTEX_POINT('',#385775); +#385775 = CARTESIAN_POINT('',(148.1,-158.05,1.51)); +#385776 = LINE('',#385777,#385778); +#385777 = CARTESIAN_POINT('',(148.1,-158.05,1.51)); +#385778 = VECTOR('',#385779,1.); +#385779 = DIRECTION('',(0.,0.,1.)); +#385780 = ORIENTED_EDGE('',*,*,#385781,.F.); +#385781 = EDGE_CURVE('',#385742,#385774,#385782,.T.); +#385782 = CIRCLE('',#385783,0.150000058649); +#385783 = AXIS2_PLACEMENT_3D('',#385784,#385785,#385786); +#385784 = CARTESIAN_POINT('',(148.09999994135,-157.8999999413,1.51)); +#385785 = DIRECTION('',(0.,0.,-1.)); +#385786 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#385787 = CYLINDRICAL_SURFACE('',#385788,0.150000058649); +#385788 = AXIS2_PLACEMENT_3D('',#385789,#385790,#385791); +#385789 = CARTESIAN_POINT('',(148.09999994135,-157.8999999413,1.51)); +#385790 = DIRECTION('',(0.,0.,-1.)); +#385791 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#385792 = ADVANCED_FACE('',(#385793),#385818,.T.); +#385793 = FACE_BOUND('',#385794,.T.); +#385794 = EDGE_LOOP('',(#385795,#385796,#385804,#385812)); +#385795 = ORIENTED_EDGE('',*,*,#385773,.T.); +#385796 = ORIENTED_EDGE('',*,*,#385797,.T.); +#385797 = EDGE_CURVE('',#385765,#385798,#385800,.T.); +#385798 = VERTEX_POINT('',#385799); +#385799 = CARTESIAN_POINT('',(146.9,-158.05,1.55)); +#385800 = LINE('',#385801,#385802); +#385801 = CARTESIAN_POINT('',(148.1,-158.05,1.55)); +#385802 = VECTOR('',#385803,1.); +#385803 = DIRECTION('',(-1.,0.,0.)); +#385804 = ORIENTED_EDGE('',*,*,#385805,.F.); +#385805 = EDGE_CURVE('',#385806,#385798,#385808,.T.); +#385806 = VERTEX_POINT('',#385807); +#385807 = CARTESIAN_POINT('',(146.9,-158.05,1.51)); +#385808 = LINE('',#385809,#385810); +#385809 = CARTESIAN_POINT('',(146.9,-158.05,1.51)); +#385810 = VECTOR('',#385811,1.); +#385811 = DIRECTION('',(0.,0.,1.)); +#385812 = ORIENTED_EDGE('',*,*,#385813,.F.); +#385813 = EDGE_CURVE('',#385774,#385806,#385814,.T.); +#385814 = LINE('',#385815,#385816); +#385815 = CARTESIAN_POINT('',(148.1,-158.05,1.51)); +#385816 = VECTOR('',#385817,1.); +#385817 = DIRECTION('',(-1.,0.,0.)); +#385818 = PLANE('',#385819); +#385819 = AXIS2_PLACEMENT_3D('',#385820,#385821,#385822); +#385820 = CARTESIAN_POINT('',(148.1,-158.05,1.51)); +#385821 = DIRECTION('',(0.,-1.,0.)); +#385822 = DIRECTION('',(-1.,0.,0.)); +#385823 = ADVANCED_FACE('',(#385824),#385851,.T.); +#385824 = FACE_BOUND('',#385825,.T.); +#385825 = EDGE_LOOP('',(#385826,#385827,#385836,#385844)); +#385826 = ORIENTED_EDGE('',*,*,#385805,.T.); +#385827 = ORIENTED_EDGE('',*,*,#385828,.T.); +#385828 = EDGE_CURVE('',#385798,#385829,#385831,.T.); +#385829 = VERTEX_POINT('',#385830); +#385830 = CARTESIAN_POINT('',(146.75,-157.9,1.55)); +#385831 = CIRCLE('',#385832,0.150000058649); +#385832 = AXIS2_PLACEMENT_3D('',#385833,#385834,#385835); +#385833 = CARTESIAN_POINT('',(146.90000005864,-157.8999999413,1.55)); +#385834 = DIRECTION('',(0.,0.,-1.)); +#385835 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#385836 = ORIENTED_EDGE('',*,*,#385837,.F.); +#385837 = EDGE_CURVE('',#385838,#385829,#385840,.T.); +#385838 = VERTEX_POINT('',#385839); +#385839 = CARTESIAN_POINT('',(146.75,-157.9,1.51)); +#385840 = LINE('',#385841,#385842); +#385841 = CARTESIAN_POINT('',(146.75,-157.9,1.51)); +#385842 = VECTOR('',#385843,1.); +#385843 = DIRECTION('',(0.,0.,1.)); +#385844 = ORIENTED_EDGE('',*,*,#385845,.F.); +#385845 = EDGE_CURVE('',#385806,#385838,#385846,.T.); +#385846 = CIRCLE('',#385847,0.150000058649); +#385847 = AXIS2_PLACEMENT_3D('',#385848,#385849,#385850); +#385848 = CARTESIAN_POINT('',(146.90000005864,-157.8999999413,1.51)); +#385849 = DIRECTION('',(0.,0.,-1.)); +#385850 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#385851 = CYLINDRICAL_SURFACE('',#385852,0.150000058649); +#385852 = AXIS2_PLACEMENT_3D('',#385853,#385854,#385855); +#385853 = CARTESIAN_POINT('',(146.90000005864,-157.8999999413,1.51)); +#385854 = DIRECTION('',(0.,0.,-1.)); +#385855 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#385856 = ADVANCED_FACE('',(#385857),#385873,.T.); +#385857 = FACE_BOUND('',#385858,.T.); +#385858 = EDGE_LOOP('',(#385859,#385860,#385866,#385867)); +#385859 = ORIENTED_EDGE('',*,*,#385837,.T.); +#385860 = ORIENTED_EDGE('',*,*,#385861,.T.); +#385861 = EDGE_CURVE('',#385829,#385629,#385862,.T.); +#385862 = LINE('',#385863,#385864); +#385863 = CARTESIAN_POINT('',(146.75,-157.9,1.55)); +#385864 = VECTOR('',#385865,1.); +#385865 = DIRECTION('',(0.,1.,0.)); +#385866 = ORIENTED_EDGE('',*,*,#385626,.F.); +#385867 = ORIENTED_EDGE('',*,*,#385868,.F.); +#385868 = EDGE_CURVE('',#385838,#385627,#385869,.T.); +#385869 = LINE('',#385870,#385871); +#385870 = CARTESIAN_POINT('',(146.75,-157.9,1.51)); +#385871 = VECTOR('',#385872,1.); +#385872 = DIRECTION('',(0.,1.,0.)); +#385873 = PLANE('',#385874); +#385874 = AXIS2_PLACEMENT_3D('',#385875,#385876,#385877); +#385875 = CARTESIAN_POINT('',(146.75,-157.9,1.51)); +#385876 = DIRECTION('',(-1.,0.,0.)); +#385877 = DIRECTION('',(0.,1.,0.)); +#385878 = ADVANCED_FACE('',(#385879),#385889,.F.); +#385879 = FACE_BOUND('',#385880,.T.); +#385880 = EDGE_LOOP('',(#385881,#385882,#385883,#385884,#385885,#385886, + #385887,#385888)); +#385881 = ORIENTED_EDGE('',*,*,#385653,.T.); +#385882 = ORIENTED_EDGE('',*,*,#385685,.T.); +#385883 = ORIENTED_EDGE('',*,*,#385717,.T.); +#385884 = ORIENTED_EDGE('',*,*,#385749,.T.); +#385885 = ORIENTED_EDGE('',*,*,#385781,.T.); +#385886 = ORIENTED_EDGE('',*,*,#385813,.T.); +#385887 = ORIENTED_EDGE('',*,*,#385845,.T.); +#385888 = ORIENTED_EDGE('',*,*,#385868,.T.); +#385889 = PLANE('',#385890); +#385890 = AXIS2_PLACEMENT_3D('',#385891,#385892,#385893); +#385891 = CARTESIAN_POINT('',(0.,0.,1.51)); +#385892 = DIRECTION('',(0.,0.,1.)); +#385893 = DIRECTION('',(1.,0.,-0.)); +#385894 = ADVANCED_FACE('',(#385895),#385905,.T.); +#385895 = FACE_BOUND('',#385896,.F.); +#385896 = EDGE_LOOP('',(#385897,#385898,#385899,#385900,#385901,#385902, + #385903,#385904)); +#385897 = ORIENTED_EDGE('',*,*,#385636,.T.); +#385898 = ORIENTED_EDGE('',*,*,#385669,.T.); +#385899 = ORIENTED_EDGE('',*,*,#385700,.T.); +#385900 = ORIENTED_EDGE('',*,*,#385733,.T.); +#385901 = ORIENTED_EDGE('',*,*,#385764,.T.); +#385902 = ORIENTED_EDGE('',*,*,#385797,.T.); +#385903 = ORIENTED_EDGE('',*,*,#385828,.T.); +#385904 = ORIENTED_EDGE('',*,*,#385861,.T.); +#385905 = PLANE('',#385906); +#385906 = AXIS2_PLACEMENT_3D('',#385907,#385908,#385909); +#385907 = CARTESIAN_POINT('',(0.,0.,1.55)); +#385908 = DIRECTION('',(0.,0.,1.)); +#385909 = DIRECTION('',(1.,0.,-0.)); +#385910 = MANIFOLD_SOLID_BREP('',#385911); +#385911 = CLOSED_SHELL('',(#385912,#385954,#385985,#386018,#386049, + #386082,#386113,#386146,#386168,#386184)); +#385912 = ADVANCED_FACE('',(#385913),#385949,.T.); +#385913 = FACE_BOUND('',#385914,.T.); +#385914 = EDGE_LOOP('',(#385915,#385925,#385934,#385942)); +#385915 = ORIENTED_EDGE('',*,*,#385916,.T.); +#385916 = EDGE_CURVE('',#385917,#385919,#385921,.T.); +#385917 = VERTEX_POINT('',#385918); +#385918 = CARTESIAN_POINT('',(125.3,-82.175,1.51)); +#385919 = VERTEX_POINT('',#385920); +#385920 = CARTESIAN_POINT('',(125.3,-82.175,1.55)); +#385921 = LINE('',#385922,#385923); +#385922 = CARTESIAN_POINT('',(125.3,-82.175,1.51)); +#385923 = VECTOR('',#385924,1.); +#385924 = DIRECTION('',(0.,0.,1.)); +#385925 = ORIENTED_EDGE('',*,*,#385926,.T.); +#385926 = EDGE_CURVE('',#385919,#385927,#385929,.T.); +#385927 = VERTEX_POINT('',#385928); +#385928 = CARTESIAN_POINT('',(125.45,-82.025,1.55)); +#385929 = CIRCLE('',#385930,0.150000058649); +#385930 = AXIS2_PLACEMENT_3D('',#385931,#385932,#385933); +#385931 = CARTESIAN_POINT('',(125.45000005864,-82.17500005864,1.55)); +#385932 = DIRECTION('',(0.,0.,-1.)); +#385933 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#385934 = ORIENTED_EDGE('',*,*,#385935,.F.); +#385935 = EDGE_CURVE('',#385936,#385927,#385938,.T.); +#385936 = VERTEX_POINT('',#385937); +#385937 = CARTESIAN_POINT('',(125.45,-82.025,1.51)); +#385938 = LINE('',#385939,#385940); +#385939 = CARTESIAN_POINT('',(125.45,-82.025,1.51)); +#385940 = VECTOR('',#385941,1.); +#385941 = DIRECTION('',(0.,0.,1.)); +#385942 = ORIENTED_EDGE('',*,*,#385943,.F.); +#385943 = EDGE_CURVE('',#385917,#385936,#385944,.T.); +#385944 = CIRCLE('',#385945,0.150000058649); +#385945 = AXIS2_PLACEMENT_3D('',#385946,#385947,#385948); +#385946 = CARTESIAN_POINT('',(125.45000005864,-82.17500005864,1.51)); +#385947 = DIRECTION('',(0.,0.,-1.)); +#385948 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#385949 = CYLINDRICAL_SURFACE('',#385950,0.150000058649); +#385950 = AXIS2_PLACEMENT_3D('',#385951,#385952,#385953); +#385951 = CARTESIAN_POINT('',(125.45000005864,-82.17500005864,1.51)); +#385952 = DIRECTION('',(0.,0.,-1.)); +#385953 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#385954 = ADVANCED_FACE('',(#385955),#385980,.T.); +#385955 = FACE_BOUND('',#385956,.T.); +#385956 = EDGE_LOOP('',(#385957,#385958,#385966,#385974)); +#385957 = ORIENTED_EDGE('',*,*,#385935,.T.); +#385958 = ORIENTED_EDGE('',*,*,#385959,.T.); +#385959 = EDGE_CURVE('',#385927,#385960,#385962,.T.); +#385960 = VERTEX_POINT('',#385961); +#385961 = CARTESIAN_POINT('',(125.75,-82.025,1.55)); +#385962 = LINE('',#385963,#385964); +#385963 = CARTESIAN_POINT('',(125.45,-82.025,1.55)); +#385964 = VECTOR('',#385965,1.); +#385965 = DIRECTION('',(1.,0.,0.)); +#385966 = ORIENTED_EDGE('',*,*,#385967,.F.); +#385967 = EDGE_CURVE('',#385968,#385960,#385970,.T.); +#385968 = VERTEX_POINT('',#385969); +#385969 = CARTESIAN_POINT('',(125.75,-82.025,1.51)); +#385970 = LINE('',#385971,#385972); +#385971 = CARTESIAN_POINT('',(125.75,-82.025,1.51)); +#385972 = VECTOR('',#385973,1.); +#385973 = DIRECTION('',(0.,0.,1.)); +#385974 = ORIENTED_EDGE('',*,*,#385975,.F.); +#385975 = EDGE_CURVE('',#385936,#385968,#385976,.T.); +#385976 = LINE('',#385977,#385978); +#385977 = CARTESIAN_POINT('',(125.45,-82.025,1.51)); +#385978 = VECTOR('',#385979,1.); +#385979 = DIRECTION('',(1.,0.,0.)); +#385980 = PLANE('',#385981); +#385981 = AXIS2_PLACEMENT_3D('',#385982,#385983,#385984); +#385982 = CARTESIAN_POINT('',(125.45,-82.025,1.51)); +#385983 = DIRECTION('',(0.,1.,0.)); +#385984 = DIRECTION('',(1.,0.,0.)); +#385985 = ADVANCED_FACE('',(#385986),#386013,.T.); +#385986 = FACE_BOUND('',#385987,.T.); +#385987 = EDGE_LOOP('',(#385988,#385989,#385998,#386006)); +#385988 = ORIENTED_EDGE('',*,*,#385967,.T.); +#385989 = ORIENTED_EDGE('',*,*,#385990,.T.); +#385990 = EDGE_CURVE('',#385960,#385991,#385993,.T.); +#385991 = VERTEX_POINT('',#385992); +#385992 = CARTESIAN_POINT('',(125.9,-82.175,1.55)); +#385993 = CIRCLE('',#385994,0.150000058649); +#385994 = AXIS2_PLACEMENT_3D('',#385995,#385996,#385997); +#385995 = CARTESIAN_POINT('',(125.74999994135,-82.17500005864,1.55)); +#385996 = DIRECTION('',(0.,0.,-1.)); +#385997 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#385998 = ORIENTED_EDGE('',*,*,#385999,.F.); +#385999 = EDGE_CURVE('',#386000,#385991,#386002,.T.); +#386000 = VERTEX_POINT('',#386001); +#386001 = CARTESIAN_POINT('',(125.9,-82.175,1.51)); +#386002 = LINE('',#386003,#386004); +#386003 = CARTESIAN_POINT('',(125.9,-82.175,1.51)); +#386004 = VECTOR('',#386005,1.); +#386005 = DIRECTION('',(0.,0.,1.)); +#386006 = ORIENTED_EDGE('',*,*,#386007,.F.); +#386007 = EDGE_CURVE('',#385968,#386000,#386008,.T.); +#386008 = CIRCLE('',#386009,0.150000058649); +#386009 = AXIS2_PLACEMENT_3D('',#386010,#386011,#386012); +#386010 = CARTESIAN_POINT('',(125.74999994135,-82.17500005864,1.51)); +#386011 = DIRECTION('',(0.,0.,-1.)); +#386012 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#386013 = CYLINDRICAL_SURFACE('',#386014,0.150000058649); +#386014 = AXIS2_PLACEMENT_3D('',#386015,#386016,#386017); +#386015 = CARTESIAN_POINT('',(125.74999994135,-82.17500005864,1.51)); +#386016 = DIRECTION('',(0.,0.,-1.)); +#386017 = DIRECTION('',(3.90995314237E-07,1.,0.)); +#386018 = ADVANCED_FACE('',(#386019),#386044,.T.); +#386019 = FACE_BOUND('',#386020,.T.); +#386020 = EDGE_LOOP('',(#386021,#386022,#386030,#386038)); +#386021 = ORIENTED_EDGE('',*,*,#385999,.T.); +#386022 = ORIENTED_EDGE('',*,*,#386023,.T.); +#386023 = EDGE_CURVE('',#385991,#386024,#386026,.T.); +#386024 = VERTEX_POINT('',#386025); +#386025 = CARTESIAN_POINT('',(125.9,-83.425,1.55)); +#386026 = LINE('',#386027,#386028); +#386027 = CARTESIAN_POINT('',(125.9,-82.175,1.55)); +#386028 = VECTOR('',#386029,1.); +#386029 = DIRECTION('',(0.,-1.,0.)); +#386030 = ORIENTED_EDGE('',*,*,#386031,.F.); +#386031 = EDGE_CURVE('',#386032,#386024,#386034,.T.); +#386032 = VERTEX_POINT('',#386033); +#386033 = CARTESIAN_POINT('',(125.9,-83.425,1.51)); +#386034 = LINE('',#386035,#386036); +#386035 = CARTESIAN_POINT('',(125.9,-83.425,1.51)); +#386036 = VECTOR('',#386037,1.); +#386037 = DIRECTION('',(0.,0.,1.)); +#386038 = ORIENTED_EDGE('',*,*,#386039,.F.); +#386039 = EDGE_CURVE('',#386000,#386032,#386040,.T.); +#386040 = LINE('',#386041,#386042); +#386041 = CARTESIAN_POINT('',(125.9,-82.175,1.51)); +#386042 = VECTOR('',#386043,1.); +#386043 = DIRECTION('',(0.,-1.,0.)); +#386044 = PLANE('',#386045); +#386045 = AXIS2_PLACEMENT_3D('',#386046,#386047,#386048); +#386046 = CARTESIAN_POINT('',(125.9,-82.175,1.51)); +#386047 = DIRECTION('',(1.,0.,-0.)); +#386048 = DIRECTION('',(0.,-1.,0.)); +#386049 = ADVANCED_FACE('',(#386050),#386077,.T.); +#386050 = FACE_BOUND('',#386051,.T.); +#386051 = EDGE_LOOP('',(#386052,#386053,#386062,#386070)); +#386052 = ORIENTED_EDGE('',*,*,#386031,.T.); +#386053 = ORIENTED_EDGE('',*,*,#386054,.T.); +#386054 = EDGE_CURVE('',#386024,#386055,#386057,.T.); +#386055 = VERTEX_POINT('',#386056); +#386056 = CARTESIAN_POINT('',(125.75,-83.575,1.55)); +#386057 = CIRCLE('',#386058,0.150000058649); +#386058 = AXIS2_PLACEMENT_3D('',#386059,#386060,#386061); +#386059 = CARTESIAN_POINT('',(125.74999994135,-83.42499994135,1.55)); +#386060 = DIRECTION('',(0.,0.,-1.)); +#386061 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#386062 = ORIENTED_EDGE('',*,*,#386063,.F.); +#386063 = EDGE_CURVE('',#386064,#386055,#386066,.T.); +#386064 = VERTEX_POINT('',#386065); +#386065 = CARTESIAN_POINT('',(125.75,-83.575,1.51)); +#386066 = LINE('',#386067,#386068); +#386067 = CARTESIAN_POINT('',(125.75,-83.575,1.51)); +#386068 = VECTOR('',#386069,1.); +#386069 = DIRECTION('',(0.,0.,1.)); +#386070 = ORIENTED_EDGE('',*,*,#386071,.F.); +#386071 = EDGE_CURVE('',#386032,#386064,#386072,.T.); +#386072 = CIRCLE('',#386073,0.150000058649); +#386073 = AXIS2_PLACEMENT_3D('',#386074,#386075,#386076); +#386074 = CARTESIAN_POINT('',(125.74999994135,-83.42499994135,1.51)); +#386075 = DIRECTION('',(0.,0.,-1.)); +#386076 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#386077 = CYLINDRICAL_SURFACE('',#386078,0.150000058649); +#386078 = AXIS2_PLACEMENT_3D('',#386079,#386080,#386081); +#386079 = CARTESIAN_POINT('',(125.74999994135,-83.42499994135,1.51)); +#386080 = DIRECTION('',(0.,0.,-1.)); +#386081 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#386082 = ADVANCED_FACE('',(#386083),#386108,.T.); +#386083 = FACE_BOUND('',#386084,.T.); +#386084 = EDGE_LOOP('',(#386085,#386086,#386094,#386102)); +#386085 = ORIENTED_EDGE('',*,*,#386063,.T.); +#386086 = ORIENTED_EDGE('',*,*,#386087,.T.); +#386087 = EDGE_CURVE('',#386055,#386088,#386090,.T.); +#386088 = VERTEX_POINT('',#386089); +#386089 = CARTESIAN_POINT('',(125.45,-83.575,1.55)); +#386090 = LINE('',#386091,#386092); +#386091 = CARTESIAN_POINT('',(125.75,-83.575,1.55)); +#386092 = VECTOR('',#386093,1.); +#386093 = DIRECTION('',(-1.,0.,0.)); +#386094 = ORIENTED_EDGE('',*,*,#386095,.F.); +#386095 = EDGE_CURVE('',#386096,#386088,#386098,.T.); +#386096 = VERTEX_POINT('',#386097); +#386097 = CARTESIAN_POINT('',(125.45,-83.575,1.51)); +#386098 = LINE('',#386099,#386100); +#386099 = CARTESIAN_POINT('',(125.45,-83.575,1.51)); +#386100 = VECTOR('',#386101,1.); +#386101 = DIRECTION('',(0.,0.,1.)); +#386102 = ORIENTED_EDGE('',*,*,#386103,.F.); +#386103 = EDGE_CURVE('',#386064,#386096,#386104,.T.); +#386104 = LINE('',#386105,#386106); +#386105 = CARTESIAN_POINT('',(125.75,-83.575,1.51)); +#386106 = VECTOR('',#386107,1.); +#386107 = DIRECTION('',(-1.,0.,0.)); +#386108 = PLANE('',#386109); +#386109 = AXIS2_PLACEMENT_3D('',#386110,#386111,#386112); +#386110 = CARTESIAN_POINT('',(125.75,-83.575,1.51)); +#386111 = DIRECTION('',(0.,-1.,0.)); +#386112 = DIRECTION('',(-1.,0.,0.)); +#386113 = ADVANCED_FACE('',(#386114),#386141,.T.); +#386114 = FACE_BOUND('',#386115,.T.); +#386115 = EDGE_LOOP('',(#386116,#386117,#386126,#386134)); +#386116 = ORIENTED_EDGE('',*,*,#386095,.T.); +#386117 = ORIENTED_EDGE('',*,*,#386118,.T.); +#386118 = EDGE_CURVE('',#386088,#386119,#386121,.T.); +#386119 = VERTEX_POINT('',#386120); +#386120 = CARTESIAN_POINT('',(125.3,-83.425,1.55)); +#386121 = CIRCLE('',#386122,0.150000058649); +#386122 = AXIS2_PLACEMENT_3D('',#386123,#386124,#386125); +#386123 = CARTESIAN_POINT('',(125.45000005864,-83.42499994135,1.55)); +#386124 = DIRECTION('',(0.,0.,-1.)); +#386125 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#386126 = ORIENTED_EDGE('',*,*,#386127,.F.); +#386127 = EDGE_CURVE('',#386128,#386119,#386130,.T.); +#386128 = VERTEX_POINT('',#386129); +#386129 = CARTESIAN_POINT('',(125.3,-83.425,1.51)); +#386130 = LINE('',#386131,#386132); +#386131 = CARTESIAN_POINT('',(125.3,-83.425,1.51)); +#386132 = VECTOR('',#386133,1.); +#386133 = DIRECTION('',(0.,0.,1.)); +#386134 = ORIENTED_EDGE('',*,*,#386135,.F.); +#386135 = EDGE_CURVE('',#386096,#386128,#386136,.T.); +#386136 = CIRCLE('',#386137,0.150000058649); +#386137 = AXIS2_PLACEMENT_3D('',#386138,#386139,#386140); +#386138 = CARTESIAN_POINT('',(125.45000005864,-83.42499994135,1.51)); +#386139 = DIRECTION('',(0.,0.,-1.)); +#386140 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#386141 = CYLINDRICAL_SURFACE('',#386142,0.150000058649); +#386142 = AXIS2_PLACEMENT_3D('',#386143,#386144,#386145); +#386143 = CARTESIAN_POINT('',(125.45000005864,-83.42499994135,1.51)); +#386144 = DIRECTION('',(0.,0.,-1.)); +#386145 = DIRECTION('',(-3.909955037149E-07,-1.,-0.)); +#386146 = ADVANCED_FACE('',(#386147),#386163,.T.); +#386147 = FACE_BOUND('',#386148,.T.); +#386148 = EDGE_LOOP('',(#386149,#386150,#386156,#386157)); +#386149 = ORIENTED_EDGE('',*,*,#386127,.T.); +#386150 = ORIENTED_EDGE('',*,*,#386151,.T.); +#386151 = EDGE_CURVE('',#386119,#385919,#386152,.T.); +#386152 = LINE('',#386153,#386154); +#386153 = CARTESIAN_POINT('',(125.3,-83.425,1.55)); +#386154 = VECTOR('',#386155,1.); +#386155 = DIRECTION('',(0.,1.,0.)); +#386156 = ORIENTED_EDGE('',*,*,#385916,.F.); +#386157 = ORIENTED_EDGE('',*,*,#386158,.F.); +#386158 = EDGE_CURVE('',#386128,#385917,#386159,.T.); +#386159 = LINE('',#386160,#386161); +#386160 = CARTESIAN_POINT('',(125.3,-83.425,1.51)); +#386161 = VECTOR('',#386162,1.); +#386162 = DIRECTION('',(0.,1.,0.)); +#386163 = PLANE('',#386164); +#386164 = AXIS2_PLACEMENT_3D('',#386165,#386166,#386167); +#386165 = CARTESIAN_POINT('',(125.3,-83.425,1.51)); +#386166 = DIRECTION('',(-1.,0.,0.)); +#386167 = DIRECTION('',(0.,1.,0.)); +#386168 = ADVANCED_FACE('',(#386169),#386179,.F.); +#386169 = FACE_BOUND('',#386170,.T.); +#386170 = EDGE_LOOP('',(#386171,#386172,#386173,#386174,#386175,#386176, + #386177,#386178)); +#386171 = ORIENTED_EDGE('',*,*,#385943,.T.); +#386172 = ORIENTED_EDGE('',*,*,#385975,.T.); +#386173 = ORIENTED_EDGE('',*,*,#386007,.T.); +#386174 = ORIENTED_EDGE('',*,*,#386039,.T.); +#386175 = ORIENTED_EDGE('',*,*,#386071,.T.); +#386176 = ORIENTED_EDGE('',*,*,#386103,.T.); +#386177 = ORIENTED_EDGE('',*,*,#386135,.T.); +#386178 = ORIENTED_EDGE('',*,*,#386158,.T.); +#386179 = PLANE('',#386180); +#386180 = AXIS2_PLACEMENT_3D('',#386181,#386182,#386183); +#386181 = CARTESIAN_POINT('',(0.,0.,1.51)); +#386182 = DIRECTION('',(0.,0.,1.)); +#386183 = DIRECTION('',(1.,0.,-0.)); +#386184 = ADVANCED_FACE('',(#386185),#386195,.T.); +#386185 = FACE_BOUND('',#386186,.F.); +#386186 = EDGE_LOOP('',(#386187,#386188,#386189,#386190,#386191,#386192, + #386193,#386194)); +#386187 = ORIENTED_EDGE('',*,*,#385926,.T.); +#386188 = ORIENTED_EDGE('',*,*,#385959,.T.); +#386189 = ORIENTED_EDGE('',*,*,#385990,.T.); +#386190 = ORIENTED_EDGE('',*,*,#386023,.T.); +#386191 = ORIENTED_EDGE('',*,*,#386054,.T.); +#386192 = ORIENTED_EDGE('',*,*,#386087,.T.); +#386193 = ORIENTED_EDGE('',*,*,#386118,.T.); +#386194 = ORIENTED_EDGE('',*,*,#386151,.T.); +#386195 = PLANE('',#386196); +#386196 = AXIS2_PLACEMENT_3D('',#386197,#386198,#386199); +#386197 = CARTESIAN_POINT('',(0.,0.,1.55)); +#386198 = DIRECTION('',(0.,0.,1.)); +#386199 = DIRECTION('',(1.,0.,-0.)); +#386200 = MANIFOLD_SOLID_BREP('',#386201); +#386201 = CLOSED_SHELL('',(#386202,#386244,#386275,#386308,#386339, + #386372,#386403,#386436,#386458,#386474)); +#386202 = ADVANCED_FACE('',(#386203),#386239,.T.); +#386203 = FACE_BOUND('',#386204,.T.); +#386204 = EDGE_LOOP('',(#386205,#386215,#386224,#386232)); +#386205 = ORIENTED_EDGE('',*,*,#386206,.T.); +#386206 = EDGE_CURVE('',#386207,#386209,#386211,.T.); +#386207 = VERTEX_POINT('',#386208); +#386208 = CARTESIAN_POINT('',(144.49,-152.565,1.51)); +#386209 = VERTEX_POINT('',#386210); +#386210 = CARTESIAN_POINT('',(144.49,-152.565,1.55)); +#386211 = LINE('',#386212,#386213); +#386212 = CARTESIAN_POINT('',(144.49,-152.565,1.51)); +#386213 = VECTOR('',#386214,1.); +#386214 = DIRECTION('',(0.,0.,1.)); +#386215 = ORIENTED_EDGE('',*,*,#386216,.T.); +#386216 = EDGE_CURVE('',#386209,#386217,#386219,.T.); +#386217 = VERTEX_POINT('',#386218); +#386218 = CARTESIAN_POINT('',(144.625,-152.43,1.55)); +#386219 = CIRCLE('',#386220,0.135001418495); +#386220 = AXIS2_PLACEMENT_3D('',#386221,#386222,#386223); +#386221 = CARTESIAN_POINT('',(144.62500141848,-152.5650014184,1.55)); +#386222 = DIRECTION('',(0.,0.,-1.)); +#386223 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#386224 = ORIENTED_EDGE('',*,*,#386225,.F.); +#386225 = EDGE_CURVE('',#386226,#386217,#386228,.T.); +#386226 = VERTEX_POINT('',#386227); +#386227 = CARTESIAN_POINT('',(144.625,-152.43,1.51)); +#386228 = LINE('',#386229,#386230); +#386229 = CARTESIAN_POINT('',(144.625,-152.43,1.51)); +#386230 = VECTOR('',#386231,1.); +#386231 = DIRECTION('',(0.,0.,1.)); +#386232 = ORIENTED_EDGE('',*,*,#386233,.F.); +#386233 = EDGE_CURVE('',#386207,#386226,#386234,.T.); +#386234 = CIRCLE('',#386235,0.135001418495); +#386235 = AXIS2_PLACEMENT_3D('',#386236,#386237,#386238); +#386236 = CARTESIAN_POINT('',(144.62500141848,-152.5650014184,1.51)); +#386237 = DIRECTION('',(0.,0.,-1.)); +#386238 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#386239 = CYLINDRICAL_SURFACE('',#386240,0.135001418495); +#386240 = AXIS2_PLACEMENT_3D('',#386241,#386242,#386243); +#386241 = CARTESIAN_POINT('',(144.62500141848,-152.5650014184,1.51)); +#386242 = DIRECTION('',(0.,0.,-1.)); +#386243 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#386244 = ADVANCED_FACE('',(#386245),#386270,.T.); +#386245 = FACE_BOUND('',#386246,.T.); +#386246 = EDGE_LOOP('',(#386247,#386248,#386256,#386264)); +#386247 = ORIENTED_EDGE('',*,*,#386225,.T.); +#386248 = ORIENTED_EDGE('',*,*,#386249,.T.); +#386249 = EDGE_CURVE('',#386217,#386250,#386252,.T.); +#386250 = VERTEX_POINT('',#386251); +#386251 = CARTESIAN_POINT('',(144.895,-152.43,1.55)); +#386252 = LINE('',#386253,#386254); +#386253 = CARTESIAN_POINT('',(144.625,-152.43,1.55)); +#386254 = VECTOR('',#386255,1.); +#386255 = DIRECTION('',(1.,0.,0.)); +#386256 = ORIENTED_EDGE('',*,*,#386257,.F.); +#386257 = EDGE_CURVE('',#386258,#386250,#386260,.T.); +#386258 = VERTEX_POINT('',#386259); +#386259 = CARTESIAN_POINT('',(144.895,-152.43,1.51)); +#386260 = LINE('',#386261,#386262); +#386261 = CARTESIAN_POINT('',(144.895,-152.43,1.51)); +#386262 = VECTOR('',#386263,1.); +#386263 = DIRECTION('',(0.,0.,1.)); +#386264 = ORIENTED_EDGE('',*,*,#386265,.F.); +#386265 = EDGE_CURVE('',#386226,#386258,#386266,.T.); +#386266 = LINE('',#386267,#386268); +#386267 = CARTESIAN_POINT('',(144.625,-152.43,1.51)); +#386268 = VECTOR('',#386269,1.); +#386269 = DIRECTION('',(1.,0.,0.)); +#386270 = PLANE('',#386271); +#386271 = AXIS2_PLACEMENT_3D('',#386272,#386273,#386274); +#386272 = CARTESIAN_POINT('',(144.625,-152.43,1.51)); +#386273 = DIRECTION('',(0.,1.,0.)); +#386274 = DIRECTION('',(1.,0.,0.)); +#386275 = ADVANCED_FACE('',(#386276),#386303,.T.); +#386276 = FACE_BOUND('',#386277,.T.); +#386277 = EDGE_LOOP('',(#386278,#386279,#386288,#386296)); +#386278 = ORIENTED_EDGE('',*,*,#386257,.T.); +#386279 = ORIENTED_EDGE('',*,*,#386280,.T.); +#386280 = EDGE_CURVE('',#386250,#386281,#386283,.T.); +#386281 = VERTEX_POINT('',#386282); +#386282 = CARTESIAN_POINT('',(145.03,-152.565,1.55)); +#386283 = CIRCLE('',#386284,0.135001418495); +#386284 = AXIS2_PLACEMENT_3D('',#386285,#386286,#386287); +#386285 = CARTESIAN_POINT('',(144.89499858151,-152.5650014184,1.55)); +#386286 = DIRECTION('',(0.,0.,-1.)); +#386287 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#386288 = ORIENTED_EDGE('',*,*,#386289,.F.); +#386289 = EDGE_CURVE('',#386290,#386281,#386292,.T.); +#386290 = VERTEX_POINT('',#386291); +#386291 = CARTESIAN_POINT('',(145.03,-152.565,1.51)); +#386292 = LINE('',#386293,#386294); +#386293 = CARTESIAN_POINT('',(145.03,-152.565,1.51)); +#386294 = VECTOR('',#386295,1.); +#386295 = DIRECTION('',(0.,0.,1.)); +#386296 = ORIENTED_EDGE('',*,*,#386297,.F.); +#386297 = EDGE_CURVE('',#386258,#386290,#386298,.T.); +#386298 = CIRCLE('',#386299,0.135001418495); +#386299 = AXIS2_PLACEMENT_3D('',#386300,#386301,#386302); +#386300 = CARTESIAN_POINT('',(144.89499858151,-152.5650014184,1.51)); +#386301 = DIRECTION('',(0.,0.,-1.)); +#386302 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#386303 = CYLINDRICAL_SURFACE('',#386304,0.135001418495); +#386304 = AXIS2_PLACEMENT_3D('',#386305,#386306,#386307); +#386305 = CARTESIAN_POINT('',(144.89499858151,-152.5650014184,1.51)); +#386306 = DIRECTION('',(0.,0.,-1.)); +#386307 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#386308 = ADVANCED_FACE('',(#386309),#386334,.T.); +#386309 = FACE_BOUND('',#386310,.T.); +#386310 = EDGE_LOOP('',(#386311,#386312,#386320,#386328)); +#386311 = ORIENTED_EDGE('',*,*,#386289,.T.); +#386312 = ORIENTED_EDGE('',*,*,#386313,.T.); +#386313 = EDGE_CURVE('',#386281,#386314,#386316,.T.); +#386314 = VERTEX_POINT('',#386315); +#386315 = CARTESIAN_POINT('',(145.03,-152.935,1.55)); +#386316 = LINE('',#386317,#386318); +#386317 = CARTESIAN_POINT('',(145.03,-152.565,1.55)); +#386318 = VECTOR('',#386319,1.); +#386319 = DIRECTION('',(0.,-1.,0.)); +#386320 = ORIENTED_EDGE('',*,*,#386321,.F.); +#386321 = EDGE_CURVE('',#386322,#386314,#386324,.T.); +#386322 = VERTEX_POINT('',#386323); +#386323 = CARTESIAN_POINT('',(145.03,-152.935,1.51)); +#386324 = LINE('',#386325,#386326); +#386325 = CARTESIAN_POINT('',(145.03,-152.935,1.51)); +#386326 = VECTOR('',#386327,1.); +#386327 = DIRECTION('',(0.,0.,1.)); +#386328 = ORIENTED_EDGE('',*,*,#386329,.F.); +#386329 = EDGE_CURVE('',#386290,#386322,#386330,.T.); +#386330 = LINE('',#386331,#386332); +#386331 = CARTESIAN_POINT('',(145.03,-152.565,1.51)); +#386332 = VECTOR('',#386333,1.); +#386333 = DIRECTION('',(0.,-1.,0.)); +#386334 = PLANE('',#386335); +#386335 = AXIS2_PLACEMENT_3D('',#386336,#386337,#386338); +#386336 = CARTESIAN_POINT('',(145.03,-152.565,1.51)); +#386337 = DIRECTION('',(1.,0.,-0.)); +#386338 = DIRECTION('',(0.,-1.,0.)); +#386339 = ADVANCED_FACE('',(#386340),#386367,.T.); +#386340 = FACE_BOUND('',#386341,.T.); +#386341 = EDGE_LOOP('',(#386342,#386343,#386352,#386360)); +#386342 = ORIENTED_EDGE('',*,*,#386321,.T.); +#386343 = ORIENTED_EDGE('',*,*,#386344,.T.); +#386344 = EDGE_CURVE('',#386314,#386345,#386347,.T.); +#386345 = VERTEX_POINT('',#386346); +#386346 = CARTESIAN_POINT('',(144.895,-153.07,1.55)); +#386347 = CIRCLE('',#386348,0.135001418495); +#386348 = AXIS2_PLACEMENT_3D('',#386349,#386350,#386351); +#386349 = CARTESIAN_POINT('',(144.89499858151,-152.9349985815,1.55)); +#386350 = DIRECTION('',(0.,0.,-1.)); +#386351 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#386352 = ORIENTED_EDGE('',*,*,#386353,.F.); +#386353 = EDGE_CURVE('',#386354,#386345,#386356,.T.); +#386354 = VERTEX_POINT('',#386355); +#386355 = CARTESIAN_POINT('',(144.895,-153.07,1.51)); +#386356 = LINE('',#386357,#386358); +#386357 = CARTESIAN_POINT('',(144.895,-153.07,1.51)); +#386358 = VECTOR('',#386359,1.); +#386359 = DIRECTION('',(0.,0.,1.)); +#386360 = ORIENTED_EDGE('',*,*,#386361,.F.); +#386361 = EDGE_CURVE('',#386322,#386354,#386362,.T.); +#386362 = CIRCLE('',#386363,0.135001418495); +#386363 = AXIS2_PLACEMENT_3D('',#386364,#386365,#386366); +#386364 = CARTESIAN_POINT('',(144.89499858151,-152.9349985815,1.51)); +#386365 = DIRECTION('',(0.,0.,-1.)); +#386366 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#386367 = CYLINDRICAL_SURFACE('',#386368,0.135001418495); +#386368 = AXIS2_PLACEMENT_3D('',#386369,#386370,#386371); +#386369 = CARTESIAN_POINT('',(144.89499858151,-152.9349985815,1.51)); +#386370 = DIRECTION('',(0.,0.,-1.)); +#386371 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#386372 = ADVANCED_FACE('',(#386373),#386398,.T.); +#386373 = FACE_BOUND('',#386374,.T.); +#386374 = EDGE_LOOP('',(#386375,#386376,#386384,#386392)); +#386375 = ORIENTED_EDGE('',*,*,#386353,.T.); +#386376 = ORIENTED_EDGE('',*,*,#386377,.T.); +#386377 = EDGE_CURVE('',#386345,#386378,#386380,.T.); +#386378 = VERTEX_POINT('',#386379); +#386379 = CARTESIAN_POINT('',(144.625,-153.07,1.55)); +#386380 = LINE('',#386381,#386382); +#386381 = CARTESIAN_POINT('',(144.895,-153.07,1.55)); +#386382 = VECTOR('',#386383,1.); +#386383 = DIRECTION('',(-1.,0.,0.)); +#386384 = ORIENTED_EDGE('',*,*,#386385,.F.); +#386385 = EDGE_CURVE('',#386386,#386378,#386388,.T.); +#386386 = VERTEX_POINT('',#386387); +#386387 = CARTESIAN_POINT('',(144.625,-153.07,1.51)); +#386388 = LINE('',#386389,#386390); +#386389 = CARTESIAN_POINT('',(144.625,-153.07,1.51)); +#386390 = VECTOR('',#386391,1.); +#386391 = DIRECTION('',(0.,0.,1.)); +#386392 = ORIENTED_EDGE('',*,*,#386393,.F.); +#386393 = EDGE_CURVE('',#386354,#386386,#386394,.T.); +#386394 = LINE('',#386395,#386396); +#386395 = CARTESIAN_POINT('',(144.895,-153.07,1.51)); +#386396 = VECTOR('',#386397,1.); +#386397 = DIRECTION('',(-1.,0.,0.)); +#386398 = PLANE('',#386399); +#386399 = AXIS2_PLACEMENT_3D('',#386400,#386401,#386402); +#386400 = CARTESIAN_POINT('',(144.895,-153.07,1.51)); +#386401 = DIRECTION('',(0.,-1.,0.)); +#386402 = DIRECTION('',(-1.,0.,0.)); +#386403 = ADVANCED_FACE('',(#386404),#386431,.T.); +#386404 = FACE_BOUND('',#386405,.T.); +#386405 = EDGE_LOOP('',(#386406,#386407,#386416,#386424)); +#386406 = ORIENTED_EDGE('',*,*,#386385,.T.); +#386407 = ORIENTED_EDGE('',*,*,#386408,.T.); +#386408 = EDGE_CURVE('',#386378,#386409,#386411,.T.); +#386409 = VERTEX_POINT('',#386410); +#386410 = CARTESIAN_POINT('',(144.49,-152.935,1.55)); +#386411 = CIRCLE('',#386412,0.135001418495); +#386412 = AXIS2_PLACEMENT_3D('',#386413,#386414,#386415); +#386413 = CARTESIAN_POINT('',(144.62500141848,-152.9349985815,1.55)); +#386414 = DIRECTION('',(0.,0.,-1.)); +#386415 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#386416 = ORIENTED_EDGE('',*,*,#386417,.F.); +#386417 = EDGE_CURVE('',#386418,#386409,#386420,.T.); +#386418 = VERTEX_POINT('',#386419); +#386419 = CARTESIAN_POINT('',(144.49,-152.935,1.51)); +#386420 = LINE('',#386421,#386422); +#386421 = CARTESIAN_POINT('',(144.49,-152.935,1.51)); +#386422 = VECTOR('',#386423,1.); +#386423 = DIRECTION('',(0.,0.,1.)); +#386424 = ORIENTED_EDGE('',*,*,#386425,.F.); +#386425 = EDGE_CURVE('',#386386,#386418,#386426,.T.); +#386426 = CIRCLE('',#386427,0.135001418495); +#386427 = AXIS2_PLACEMENT_3D('',#386428,#386429,#386430); +#386428 = CARTESIAN_POINT('',(144.62500141848,-152.9349985815,1.51)); +#386429 = DIRECTION('',(0.,0.,-1.)); +#386430 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#386431 = CYLINDRICAL_SURFACE('',#386432,0.135001418495); +#386432 = AXIS2_PLACEMENT_3D('',#386433,#386434,#386435); +#386433 = CARTESIAN_POINT('',(144.62500141848,-152.9349985815,1.51)); +#386434 = DIRECTION('',(0.,0.,-1.)); +#386435 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#386436 = ADVANCED_FACE('',(#386437),#386453,.T.); +#386437 = FACE_BOUND('',#386438,.T.); +#386438 = EDGE_LOOP('',(#386439,#386440,#386446,#386447)); +#386439 = ORIENTED_EDGE('',*,*,#386417,.T.); +#386440 = ORIENTED_EDGE('',*,*,#386441,.T.); +#386441 = EDGE_CURVE('',#386409,#386209,#386442,.T.); +#386442 = LINE('',#386443,#386444); +#386443 = CARTESIAN_POINT('',(144.49,-152.935,1.55)); +#386444 = VECTOR('',#386445,1.); +#386445 = DIRECTION('',(0.,1.,0.)); +#386446 = ORIENTED_EDGE('',*,*,#386206,.F.); +#386447 = ORIENTED_EDGE('',*,*,#386448,.F.); +#386448 = EDGE_CURVE('',#386418,#386207,#386449,.T.); +#386449 = LINE('',#386450,#386451); +#386450 = CARTESIAN_POINT('',(144.49,-152.935,1.51)); +#386451 = VECTOR('',#386452,1.); +#386452 = DIRECTION('',(0.,1.,0.)); +#386453 = PLANE('',#386454); +#386454 = AXIS2_PLACEMENT_3D('',#386455,#386456,#386457); +#386455 = CARTESIAN_POINT('',(144.49,-152.935,1.51)); +#386456 = DIRECTION('',(-1.,0.,0.)); +#386457 = DIRECTION('',(0.,1.,0.)); +#386458 = ADVANCED_FACE('',(#386459),#386469,.F.); +#386459 = FACE_BOUND('',#386460,.T.); +#386460 = EDGE_LOOP('',(#386461,#386462,#386463,#386464,#386465,#386466, + #386467,#386468)); +#386461 = ORIENTED_EDGE('',*,*,#386233,.T.); +#386462 = ORIENTED_EDGE('',*,*,#386265,.T.); +#386463 = ORIENTED_EDGE('',*,*,#386297,.T.); +#386464 = ORIENTED_EDGE('',*,*,#386329,.T.); +#386465 = ORIENTED_EDGE('',*,*,#386361,.T.); +#386466 = ORIENTED_EDGE('',*,*,#386393,.T.); +#386467 = ORIENTED_EDGE('',*,*,#386425,.T.); +#386468 = ORIENTED_EDGE('',*,*,#386448,.T.); +#386469 = PLANE('',#386470); +#386470 = AXIS2_PLACEMENT_3D('',#386471,#386472,#386473); +#386471 = CARTESIAN_POINT('',(0.,0.,1.51)); +#386472 = DIRECTION('',(0.,0.,1.)); +#386473 = DIRECTION('',(1.,0.,-0.)); +#386474 = ADVANCED_FACE('',(#386475),#386485,.T.); +#386475 = FACE_BOUND('',#386476,.F.); +#386476 = EDGE_LOOP('',(#386477,#386478,#386479,#386480,#386481,#386482, + #386483,#386484)); +#386477 = ORIENTED_EDGE('',*,*,#386216,.T.); +#386478 = ORIENTED_EDGE('',*,*,#386249,.T.); +#386479 = ORIENTED_EDGE('',*,*,#386280,.T.); +#386480 = ORIENTED_EDGE('',*,*,#386313,.T.); +#386481 = ORIENTED_EDGE('',*,*,#386344,.T.); +#386482 = ORIENTED_EDGE('',*,*,#386377,.T.); +#386483 = ORIENTED_EDGE('',*,*,#386408,.T.); +#386484 = ORIENTED_EDGE('',*,*,#386441,.T.); +#386485 = PLANE('',#386486); +#386486 = AXIS2_PLACEMENT_3D('',#386487,#386488,#386489); +#386487 = CARTESIAN_POINT('',(0.,0.,1.55)); +#386488 = DIRECTION('',(0.,0.,1.)); +#386489 = DIRECTION('',(1.,0.,-0.)); +#386490 = MANIFOLD_SOLID_BREP('',#386491); +#386491 = CLOSED_SHELL('',(#386492,#386534,#386565,#386598,#386629, + #386662,#386693,#386726,#386748,#386764)); +#386492 = ADVANCED_FACE('',(#386493),#386529,.T.); +#386493 = FACE_BOUND('',#386494,.T.); +#386494 = EDGE_LOOP('',(#386495,#386505,#386514,#386522)); +#386495 = ORIENTED_EDGE('',*,*,#386496,.T.); +#386496 = EDGE_CURVE('',#386497,#386499,#386501,.T.); +#386497 = VERTEX_POINT('',#386498); +#386498 = CARTESIAN_POINT('',(142.025,-134.325,1.51)); +#386499 = VERTEX_POINT('',#386500); +#386500 = CARTESIAN_POINT('',(142.025,-134.325,1.55)); +#386501 = LINE('',#386502,#386503); +#386502 = CARTESIAN_POINT('',(142.025,-134.325,1.51)); +#386503 = VECTOR('',#386504,1.); +#386504 = DIRECTION('',(0.,0.,1.)); +#386505 = ORIENTED_EDGE('',*,*,#386506,.T.); +#386506 = EDGE_CURVE('',#386499,#386507,#386509,.T.); +#386507 = VERTEX_POINT('',#386508); +#386508 = CARTESIAN_POINT('',(142.25,-134.1,1.55)); +#386509 = CIRCLE('',#386510,0.225000087974); +#386510 = AXIS2_PLACEMENT_3D('',#386511,#386512,#386513); +#386511 = CARTESIAN_POINT('',(142.25000008797,-134.3250000879,1.55)); +#386512 = DIRECTION('',(0.,0.,-1.)); +#386513 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#386514 = ORIENTED_EDGE('',*,*,#386515,.F.); +#386515 = EDGE_CURVE('',#386516,#386507,#386518,.T.); +#386516 = VERTEX_POINT('',#386517); +#386517 = CARTESIAN_POINT('',(142.25,-134.1,1.51)); +#386518 = LINE('',#386519,#386520); +#386519 = CARTESIAN_POINT('',(142.25,-134.1,1.51)); +#386520 = VECTOR('',#386521,1.); +#386521 = DIRECTION('',(0.,0.,1.)); +#386522 = ORIENTED_EDGE('',*,*,#386523,.F.); +#386523 = EDGE_CURVE('',#386497,#386516,#386524,.T.); +#386524 = CIRCLE('',#386525,0.225000087974); +#386525 = AXIS2_PLACEMENT_3D('',#386526,#386527,#386528); +#386526 = CARTESIAN_POINT('',(142.25000008797,-134.3250000879,1.51)); +#386527 = DIRECTION('',(0.,0.,-1.)); +#386528 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#386529 = CYLINDRICAL_SURFACE('',#386530,0.225000087974); +#386530 = AXIS2_PLACEMENT_3D('',#386531,#386532,#386533); +#386531 = CARTESIAN_POINT('',(142.25000008797,-134.3250000879,1.51)); +#386532 = DIRECTION('',(0.,0.,-1.)); +#386533 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#386534 = ADVANCED_FACE('',(#386535),#386560,.T.); +#386535 = FACE_BOUND('',#386536,.T.); +#386536 = EDGE_LOOP('',(#386537,#386538,#386546,#386554)); +#386537 = ORIENTED_EDGE('',*,*,#386515,.T.); +#386538 = ORIENTED_EDGE('',*,*,#386539,.T.); +#386539 = EDGE_CURVE('',#386507,#386540,#386542,.T.); +#386540 = VERTEX_POINT('',#386541); +#386541 = CARTESIAN_POINT('',(142.75,-134.1,1.55)); +#386542 = LINE('',#386543,#386544); +#386543 = CARTESIAN_POINT('',(142.25,-134.1,1.55)); +#386544 = VECTOR('',#386545,1.); +#386545 = DIRECTION('',(1.,0.,0.)); +#386546 = ORIENTED_EDGE('',*,*,#386547,.F.); +#386547 = EDGE_CURVE('',#386548,#386540,#386550,.T.); +#386548 = VERTEX_POINT('',#386549); +#386549 = CARTESIAN_POINT('',(142.75,-134.1,1.51)); +#386550 = LINE('',#386551,#386552); +#386551 = CARTESIAN_POINT('',(142.75,-134.1,1.51)); +#386552 = VECTOR('',#386553,1.); +#386553 = DIRECTION('',(0.,0.,1.)); +#386554 = ORIENTED_EDGE('',*,*,#386555,.F.); +#386555 = EDGE_CURVE('',#386516,#386548,#386556,.T.); +#386556 = LINE('',#386557,#386558); +#386557 = CARTESIAN_POINT('',(142.25,-134.1,1.51)); +#386558 = VECTOR('',#386559,1.); +#386559 = DIRECTION('',(1.,0.,0.)); +#386560 = PLANE('',#386561); +#386561 = AXIS2_PLACEMENT_3D('',#386562,#386563,#386564); +#386562 = CARTESIAN_POINT('',(142.25,-134.1,1.51)); +#386563 = DIRECTION('',(0.,1.,0.)); +#386564 = DIRECTION('',(1.,0.,0.)); +#386565 = ADVANCED_FACE('',(#386566),#386593,.T.); +#386566 = FACE_BOUND('',#386567,.T.); +#386567 = EDGE_LOOP('',(#386568,#386569,#386578,#386586)); +#386568 = ORIENTED_EDGE('',*,*,#386547,.T.); +#386569 = ORIENTED_EDGE('',*,*,#386570,.T.); +#386570 = EDGE_CURVE('',#386540,#386571,#386573,.T.); +#386571 = VERTEX_POINT('',#386572); +#386572 = CARTESIAN_POINT('',(142.975,-134.325,1.55)); +#386573 = CIRCLE('',#386574,0.225000087974); +#386574 = AXIS2_PLACEMENT_3D('',#386575,#386576,#386577); +#386575 = CARTESIAN_POINT('',(142.74999991202,-134.3250000879,1.55)); +#386576 = DIRECTION('',(0.,0.,-1.)); +#386577 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#386578 = ORIENTED_EDGE('',*,*,#386579,.F.); +#386579 = EDGE_CURVE('',#386580,#386571,#386582,.T.); +#386580 = VERTEX_POINT('',#386581); +#386581 = CARTESIAN_POINT('',(142.975,-134.325,1.51)); +#386582 = LINE('',#386583,#386584); +#386583 = CARTESIAN_POINT('',(142.975,-134.325,1.51)); +#386584 = VECTOR('',#386585,1.); +#386585 = DIRECTION('',(0.,0.,1.)); +#386586 = ORIENTED_EDGE('',*,*,#386587,.F.); +#386587 = EDGE_CURVE('',#386548,#386580,#386588,.T.); +#386588 = CIRCLE('',#386589,0.225000087974); +#386589 = AXIS2_PLACEMENT_3D('',#386590,#386591,#386592); +#386590 = CARTESIAN_POINT('',(142.74999991202,-134.3250000879,1.51)); +#386591 = DIRECTION('',(0.,0.,-1.)); +#386592 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#386593 = CYLINDRICAL_SURFACE('',#386594,0.225000087974); +#386594 = AXIS2_PLACEMENT_3D('',#386595,#386596,#386597); +#386595 = CARTESIAN_POINT('',(142.74999991202,-134.3250000879,1.51)); +#386596 = DIRECTION('',(0.,0.,-1.)); +#386597 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#386598 = ADVANCED_FACE('',(#386599),#386624,.T.); +#386599 = FACE_BOUND('',#386600,.T.); +#386600 = EDGE_LOOP('',(#386601,#386602,#386610,#386618)); +#386601 = ORIENTED_EDGE('',*,*,#386579,.T.); +#386602 = ORIENTED_EDGE('',*,*,#386603,.T.); +#386603 = EDGE_CURVE('',#386571,#386604,#386606,.T.); +#386604 = VERTEX_POINT('',#386605); +#386605 = CARTESIAN_POINT('',(142.975,-134.775,1.55)); +#386606 = LINE('',#386607,#386608); +#386607 = CARTESIAN_POINT('',(142.975,-134.325,1.55)); +#386608 = VECTOR('',#386609,1.); +#386609 = DIRECTION('',(0.,-1.,0.)); +#386610 = ORIENTED_EDGE('',*,*,#386611,.F.); +#386611 = EDGE_CURVE('',#386612,#386604,#386614,.T.); +#386612 = VERTEX_POINT('',#386613); +#386613 = CARTESIAN_POINT('',(142.975,-134.775,1.51)); +#386614 = LINE('',#386615,#386616); +#386615 = CARTESIAN_POINT('',(142.975,-134.775,1.51)); +#386616 = VECTOR('',#386617,1.); +#386617 = DIRECTION('',(0.,0.,1.)); +#386618 = ORIENTED_EDGE('',*,*,#386619,.F.); +#386619 = EDGE_CURVE('',#386580,#386612,#386620,.T.); +#386620 = LINE('',#386621,#386622); +#386621 = CARTESIAN_POINT('',(142.975,-134.325,1.51)); +#386622 = VECTOR('',#386623,1.); +#386623 = DIRECTION('',(0.,-1.,0.)); +#386624 = PLANE('',#386625); +#386625 = AXIS2_PLACEMENT_3D('',#386626,#386627,#386628); +#386626 = CARTESIAN_POINT('',(142.975,-134.325,1.51)); +#386627 = DIRECTION('',(1.,0.,-0.)); +#386628 = DIRECTION('',(0.,-1.,0.)); +#386629 = ADVANCED_FACE('',(#386630),#386657,.T.); +#386630 = FACE_BOUND('',#386631,.T.); +#386631 = EDGE_LOOP('',(#386632,#386633,#386642,#386650)); +#386632 = ORIENTED_EDGE('',*,*,#386611,.T.); +#386633 = ORIENTED_EDGE('',*,*,#386634,.T.); +#386634 = EDGE_CURVE('',#386604,#386635,#386637,.T.); +#386635 = VERTEX_POINT('',#386636); +#386636 = CARTESIAN_POINT('',(142.75,-135.,1.55)); +#386637 = CIRCLE('',#386638,0.225000087974); +#386638 = AXIS2_PLACEMENT_3D('',#386639,#386640,#386641); +#386639 = CARTESIAN_POINT('',(142.74999991202,-134.774999912,1.55)); +#386640 = DIRECTION('',(0.,0.,-1.)); +#386641 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#386642 = ORIENTED_EDGE('',*,*,#386643,.F.); +#386643 = EDGE_CURVE('',#386644,#386635,#386646,.T.); +#386644 = VERTEX_POINT('',#386645); +#386645 = CARTESIAN_POINT('',(142.75,-135.,1.51)); +#386646 = LINE('',#386647,#386648); +#386647 = CARTESIAN_POINT('',(142.75,-135.,1.51)); +#386648 = VECTOR('',#386649,1.); +#386649 = DIRECTION('',(0.,0.,1.)); +#386650 = ORIENTED_EDGE('',*,*,#386651,.F.); +#386651 = EDGE_CURVE('',#386612,#386644,#386652,.T.); +#386652 = CIRCLE('',#386653,0.225000087974); +#386653 = AXIS2_PLACEMENT_3D('',#386654,#386655,#386656); +#386654 = CARTESIAN_POINT('',(142.74999991202,-134.774999912,1.51)); +#386655 = DIRECTION('',(0.,0.,-1.)); +#386656 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#386657 = CYLINDRICAL_SURFACE('',#386658,0.225000087974); +#386658 = AXIS2_PLACEMENT_3D('',#386659,#386660,#386661); +#386659 = CARTESIAN_POINT('',(142.74999991202,-134.774999912,1.51)); +#386660 = DIRECTION('',(0.,0.,-1.)); +#386661 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#386662 = ADVANCED_FACE('',(#386663),#386688,.T.); +#386663 = FACE_BOUND('',#386664,.T.); +#386664 = EDGE_LOOP('',(#386665,#386666,#386674,#386682)); +#386665 = ORIENTED_EDGE('',*,*,#386643,.T.); +#386666 = ORIENTED_EDGE('',*,*,#386667,.T.); +#386667 = EDGE_CURVE('',#386635,#386668,#386670,.T.); +#386668 = VERTEX_POINT('',#386669); +#386669 = CARTESIAN_POINT('',(142.25,-135.,1.55)); +#386670 = LINE('',#386671,#386672); +#386671 = CARTESIAN_POINT('',(142.75,-135.,1.55)); +#386672 = VECTOR('',#386673,1.); +#386673 = DIRECTION('',(-1.,0.,0.)); +#386674 = ORIENTED_EDGE('',*,*,#386675,.F.); +#386675 = EDGE_CURVE('',#386676,#386668,#386678,.T.); +#386676 = VERTEX_POINT('',#386677); +#386677 = CARTESIAN_POINT('',(142.25,-135.,1.51)); +#386678 = LINE('',#386679,#386680); +#386679 = CARTESIAN_POINT('',(142.25,-135.,1.51)); +#386680 = VECTOR('',#386681,1.); +#386681 = DIRECTION('',(0.,0.,1.)); +#386682 = ORIENTED_EDGE('',*,*,#386683,.F.); +#386683 = EDGE_CURVE('',#386644,#386676,#386684,.T.); +#386684 = LINE('',#386685,#386686); +#386685 = CARTESIAN_POINT('',(142.75,-135.,1.51)); +#386686 = VECTOR('',#386687,1.); +#386687 = DIRECTION('',(-1.,0.,0.)); +#386688 = PLANE('',#386689); +#386689 = AXIS2_PLACEMENT_3D('',#386690,#386691,#386692); +#386690 = CARTESIAN_POINT('',(142.75,-135.,1.51)); +#386691 = DIRECTION('',(0.,-1.,0.)); +#386692 = DIRECTION('',(-1.,0.,0.)); +#386693 = ADVANCED_FACE('',(#386694),#386721,.T.); +#386694 = FACE_BOUND('',#386695,.T.); +#386695 = EDGE_LOOP('',(#386696,#386697,#386706,#386714)); +#386696 = ORIENTED_EDGE('',*,*,#386675,.T.); +#386697 = ORIENTED_EDGE('',*,*,#386698,.T.); +#386698 = EDGE_CURVE('',#386668,#386699,#386701,.T.); +#386699 = VERTEX_POINT('',#386700); +#386700 = CARTESIAN_POINT('',(142.025,-134.775,1.55)); +#386701 = CIRCLE('',#386702,0.225000087974); +#386702 = AXIS2_PLACEMENT_3D('',#386703,#386704,#386705); +#386703 = CARTESIAN_POINT('',(142.25000008797,-134.774999912,1.55)); +#386704 = DIRECTION('',(0.,0.,-1.)); +#386705 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#386706 = ORIENTED_EDGE('',*,*,#386707,.F.); +#386707 = EDGE_CURVE('',#386708,#386699,#386710,.T.); +#386708 = VERTEX_POINT('',#386709); +#386709 = CARTESIAN_POINT('',(142.025,-134.775,1.51)); +#386710 = LINE('',#386711,#386712); +#386711 = CARTESIAN_POINT('',(142.025,-134.775,1.51)); +#386712 = VECTOR('',#386713,1.); +#386713 = DIRECTION('',(0.,0.,1.)); +#386714 = ORIENTED_EDGE('',*,*,#386715,.F.); +#386715 = EDGE_CURVE('',#386676,#386708,#386716,.T.); +#386716 = CIRCLE('',#386717,0.225000087974); +#386717 = AXIS2_PLACEMENT_3D('',#386718,#386719,#386720); +#386718 = CARTESIAN_POINT('',(142.25000008797,-134.774999912,1.51)); +#386719 = DIRECTION('',(0.,0.,-1.)); +#386720 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#386721 = CYLINDRICAL_SURFACE('',#386722,0.225000087974); +#386722 = AXIS2_PLACEMENT_3D('',#386723,#386724,#386725); +#386723 = CARTESIAN_POINT('',(142.25000008797,-134.774999912,1.51)); +#386724 = DIRECTION('',(0.,0.,-1.)); +#386725 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#386726 = ADVANCED_FACE('',(#386727),#386743,.T.); +#386727 = FACE_BOUND('',#386728,.T.); +#386728 = EDGE_LOOP('',(#386729,#386730,#386736,#386737)); +#386729 = ORIENTED_EDGE('',*,*,#386707,.T.); +#386730 = ORIENTED_EDGE('',*,*,#386731,.T.); +#386731 = EDGE_CURVE('',#386699,#386499,#386732,.T.); +#386732 = LINE('',#386733,#386734); +#386733 = CARTESIAN_POINT('',(142.025,-134.775,1.55)); +#386734 = VECTOR('',#386735,1.); +#386735 = DIRECTION('',(0.,1.,0.)); +#386736 = ORIENTED_EDGE('',*,*,#386496,.F.); +#386737 = ORIENTED_EDGE('',*,*,#386738,.F.); +#386738 = EDGE_CURVE('',#386708,#386497,#386739,.T.); +#386739 = LINE('',#386740,#386741); +#386740 = CARTESIAN_POINT('',(142.025,-134.775,1.51)); +#386741 = VECTOR('',#386742,1.); +#386742 = DIRECTION('',(0.,1.,0.)); +#386743 = PLANE('',#386744); +#386744 = AXIS2_PLACEMENT_3D('',#386745,#386746,#386747); +#386745 = CARTESIAN_POINT('',(142.025,-134.775,1.51)); +#386746 = DIRECTION('',(-1.,0.,0.)); +#386747 = DIRECTION('',(0.,1.,0.)); +#386748 = ADVANCED_FACE('',(#386749),#386759,.F.); +#386749 = FACE_BOUND('',#386750,.T.); +#386750 = EDGE_LOOP('',(#386751,#386752,#386753,#386754,#386755,#386756, + #386757,#386758)); +#386751 = ORIENTED_EDGE('',*,*,#386523,.T.); +#386752 = ORIENTED_EDGE('',*,*,#386555,.T.); +#386753 = ORIENTED_EDGE('',*,*,#386587,.T.); +#386754 = ORIENTED_EDGE('',*,*,#386619,.T.); +#386755 = ORIENTED_EDGE('',*,*,#386651,.T.); +#386756 = ORIENTED_EDGE('',*,*,#386683,.T.); +#386757 = ORIENTED_EDGE('',*,*,#386715,.T.); +#386758 = ORIENTED_EDGE('',*,*,#386738,.T.); +#386759 = PLANE('',#386760); +#386760 = AXIS2_PLACEMENT_3D('',#386761,#386762,#386763); +#386761 = CARTESIAN_POINT('',(0.,0.,1.51)); +#386762 = DIRECTION('',(0.,0.,1.)); +#386763 = DIRECTION('',(1.,0.,-0.)); +#386764 = ADVANCED_FACE('',(#386765),#386775,.T.); +#386765 = FACE_BOUND('',#386766,.F.); +#386766 = EDGE_LOOP('',(#386767,#386768,#386769,#386770,#386771,#386772, + #386773,#386774)); +#386767 = ORIENTED_EDGE('',*,*,#386506,.T.); +#386768 = ORIENTED_EDGE('',*,*,#386539,.T.); +#386769 = ORIENTED_EDGE('',*,*,#386570,.T.); +#386770 = ORIENTED_EDGE('',*,*,#386603,.T.); +#386771 = ORIENTED_EDGE('',*,*,#386634,.T.); +#386772 = ORIENTED_EDGE('',*,*,#386667,.T.); +#386773 = ORIENTED_EDGE('',*,*,#386698,.T.); +#386774 = ORIENTED_EDGE('',*,*,#386731,.T.); +#386775 = PLANE('',#386776); +#386776 = AXIS2_PLACEMENT_3D('',#386777,#386778,#386779); +#386777 = CARTESIAN_POINT('',(0.,0.,1.55)); +#386778 = DIRECTION('',(0.,0.,1.)); +#386779 = DIRECTION('',(1.,0.,-0.)); +#386780 = MANIFOLD_SOLID_BREP('',#386781); +#386781 = CLOSED_SHELL('',(#386782,#386824,#386855,#386888,#386919, + #386952,#386983,#387016,#387038,#387054)); +#386782 = ADVANCED_FACE('',(#386783),#386819,.T.); +#386783 = FACE_BOUND('',#386784,.T.); +#386784 = EDGE_LOOP('',(#386785,#386795,#386804,#386812)); +#386785 = ORIENTED_EDGE('',*,*,#386786,.T.); +#386786 = EDGE_CURVE('',#386787,#386789,#386791,.T.); +#386787 = VERTEX_POINT('',#386788); +#386788 = CARTESIAN_POINT('',(125.48,-84.455,1.51)); +#386789 = VERTEX_POINT('',#386790); +#386790 = CARTESIAN_POINT('',(125.48,-84.455,1.55)); +#386791 = LINE('',#386792,#386793); +#386792 = CARTESIAN_POINT('',(125.48,-84.455,1.51)); +#386793 = VECTOR('',#386794,1.); +#386794 = DIRECTION('',(0.,0.,1.)); +#386795 = ORIENTED_EDGE('',*,*,#386796,.T.); +#386796 = EDGE_CURVE('',#386789,#386797,#386799,.T.); +#386797 = VERTEX_POINT('',#386798); +#386798 = CARTESIAN_POINT('',(125.62,-84.315,1.55)); +#386799 = CIRCLE('',#386800,0.139999827125); +#386800 = AXIS2_PLACEMENT_3D('',#386801,#386802,#386803); +#386801 = CARTESIAN_POINT('',(125.61999982712,-84.45499982712,1.55)); +#386802 = DIRECTION('',(0.,0.,-1.)); +#386803 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#386804 = ORIENTED_EDGE('',*,*,#386805,.F.); +#386805 = EDGE_CURVE('',#386806,#386797,#386808,.T.); +#386806 = VERTEX_POINT('',#386807); +#386807 = CARTESIAN_POINT('',(125.62,-84.315,1.51)); +#386808 = LINE('',#386809,#386810); +#386809 = CARTESIAN_POINT('',(125.62,-84.315,1.51)); +#386810 = VECTOR('',#386811,1.); +#386811 = DIRECTION('',(0.,0.,1.)); +#386812 = ORIENTED_EDGE('',*,*,#386813,.F.); +#386813 = EDGE_CURVE('',#386787,#386806,#386814,.T.); +#386814 = CIRCLE('',#386815,0.139999827125); +#386815 = AXIS2_PLACEMENT_3D('',#386816,#386817,#386818); +#386816 = CARTESIAN_POINT('',(125.61999982712,-84.45499982712,1.51)); +#386817 = DIRECTION('',(0.,0.,-1.)); +#386818 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#386819 = CYLINDRICAL_SURFACE('',#386820,0.139999827125); +#386820 = AXIS2_PLACEMENT_3D('',#386821,#386822,#386823); +#386821 = CARTESIAN_POINT('',(125.61999982712,-84.45499982712,1.51)); +#386822 = DIRECTION('',(0.,0.,-1.)); +#386823 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#386824 = ADVANCED_FACE('',(#386825),#386850,.T.); +#386825 = FACE_BOUND('',#386826,.T.); +#386826 = EDGE_LOOP('',(#386827,#386828,#386836,#386844)); +#386827 = ORIENTED_EDGE('',*,*,#386805,.T.); +#386828 = ORIENTED_EDGE('',*,*,#386829,.T.); +#386829 = EDGE_CURVE('',#386797,#386830,#386832,.T.); +#386830 = VERTEX_POINT('',#386831); +#386831 = CARTESIAN_POINT('',(125.9,-84.315,1.55)); +#386832 = LINE('',#386833,#386834); +#386833 = CARTESIAN_POINT('',(125.62,-84.315,1.55)); +#386834 = VECTOR('',#386835,1.); +#386835 = DIRECTION('',(1.,0.,0.)); +#386836 = ORIENTED_EDGE('',*,*,#386837,.F.); +#386837 = EDGE_CURVE('',#386838,#386830,#386840,.T.); +#386838 = VERTEX_POINT('',#386839); +#386839 = CARTESIAN_POINT('',(125.9,-84.315,1.51)); +#386840 = LINE('',#386841,#386842); +#386841 = CARTESIAN_POINT('',(125.9,-84.315,1.51)); +#386842 = VECTOR('',#386843,1.); +#386843 = DIRECTION('',(0.,0.,1.)); +#386844 = ORIENTED_EDGE('',*,*,#386845,.F.); +#386845 = EDGE_CURVE('',#386806,#386838,#386846,.T.); +#386846 = LINE('',#386847,#386848); +#386847 = CARTESIAN_POINT('',(125.62,-84.315,1.51)); +#386848 = VECTOR('',#386849,1.); +#386849 = DIRECTION('',(1.,0.,0.)); +#386850 = PLANE('',#386851); +#386851 = AXIS2_PLACEMENT_3D('',#386852,#386853,#386854); +#386852 = CARTESIAN_POINT('',(125.62,-84.315,1.51)); +#386853 = DIRECTION('',(0.,1.,0.)); +#386854 = DIRECTION('',(1.,0.,0.)); +#386855 = ADVANCED_FACE('',(#386856),#386883,.T.); +#386856 = FACE_BOUND('',#386857,.T.); +#386857 = EDGE_LOOP('',(#386858,#386859,#386868,#386876)); +#386858 = ORIENTED_EDGE('',*,*,#386837,.T.); +#386859 = ORIENTED_EDGE('',*,*,#386860,.T.); +#386860 = EDGE_CURVE('',#386830,#386861,#386863,.T.); +#386861 = VERTEX_POINT('',#386862); +#386862 = CARTESIAN_POINT('',(126.04,-84.455,1.55)); +#386863 = CIRCLE('',#386864,0.139999827125); +#386864 = AXIS2_PLACEMENT_3D('',#386865,#386866,#386867); +#386865 = CARTESIAN_POINT('',(125.90000017287,-84.45499982712,1.55)); +#386866 = DIRECTION('',(0.,0.,-1.)); +#386867 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#386868 = ORIENTED_EDGE('',*,*,#386869,.F.); +#386869 = EDGE_CURVE('',#386870,#386861,#386872,.T.); +#386870 = VERTEX_POINT('',#386871); +#386871 = CARTESIAN_POINT('',(126.04,-84.455,1.51)); +#386872 = LINE('',#386873,#386874); +#386873 = CARTESIAN_POINT('',(126.04,-84.455,1.51)); +#386874 = VECTOR('',#386875,1.); +#386875 = DIRECTION('',(0.,0.,1.)); +#386876 = ORIENTED_EDGE('',*,*,#386877,.F.); +#386877 = EDGE_CURVE('',#386838,#386870,#386878,.T.); +#386878 = CIRCLE('',#386879,0.139999827125); +#386879 = AXIS2_PLACEMENT_3D('',#386880,#386881,#386882); +#386880 = CARTESIAN_POINT('',(125.90000017287,-84.45499982712,1.51)); +#386881 = DIRECTION('',(0.,0.,-1.)); +#386882 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#386883 = CYLINDRICAL_SURFACE('',#386884,0.139999827125); +#386884 = AXIS2_PLACEMENT_3D('',#386885,#386886,#386887); +#386885 = CARTESIAN_POINT('',(125.90000017287,-84.45499982712,1.51)); +#386886 = DIRECTION('',(0.,0.,-1.)); +#386887 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#386888 = ADVANCED_FACE('',(#386889),#386914,.T.); +#386889 = FACE_BOUND('',#386890,.T.); +#386890 = EDGE_LOOP('',(#386891,#386892,#386900,#386908)); +#386891 = ORIENTED_EDGE('',*,*,#386869,.T.); +#386892 = ORIENTED_EDGE('',*,*,#386893,.T.); +#386893 = EDGE_CURVE('',#386861,#386894,#386896,.T.); +#386894 = VERTEX_POINT('',#386895); +#386895 = CARTESIAN_POINT('',(126.04,-84.795,1.55)); +#386896 = LINE('',#386897,#386898); +#386897 = CARTESIAN_POINT('',(126.04,-84.455,1.55)); +#386898 = VECTOR('',#386899,1.); +#386899 = DIRECTION('',(0.,-1.,0.)); +#386900 = ORIENTED_EDGE('',*,*,#386901,.F.); +#386901 = EDGE_CURVE('',#386902,#386894,#386904,.T.); +#386902 = VERTEX_POINT('',#386903); +#386903 = CARTESIAN_POINT('',(126.04,-84.795,1.51)); +#386904 = LINE('',#386905,#386906); +#386905 = CARTESIAN_POINT('',(126.04,-84.795,1.51)); +#386906 = VECTOR('',#386907,1.); +#386907 = DIRECTION('',(0.,0.,1.)); +#386908 = ORIENTED_EDGE('',*,*,#386909,.F.); +#386909 = EDGE_CURVE('',#386870,#386902,#386910,.T.); +#386910 = LINE('',#386911,#386912); +#386911 = CARTESIAN_POINT('',(126.04,-84.455,1.51)); +#386912 = VECTOR('',#386913,1.); +#386913 = DIRECTION('',(0.,-1.,0.)); +#386914 = PLANE('',#386915); +#386915 = AXIS2_PLACEMENT_3D('',#386916,#386917,#386918); +#386916 = CARTESIAN_POINT('',(126.04,-84.455,1.51)); +#386917 = DIRECTION('',(1.,0.,-0.)); +#386918 = DIRECTION('',(0.,-1.,0.)); +#386919 = ADVANCED_FACE('',(#386920),#386947,.T.); +#386920 = FACE_BOUND('',#386921,.T.); +#386921 = EDGE_LOOP('',(#386922,#386923,#386932,#386940)); +#386922 = ORIENTED_EDGE('',*,*,#386901,.T.); +#386923 = ORIENTED_EDGE('',*,*,#386924,.T.); +#386924 = EDGE_CURVE('',#386894,#386925,#386927,.T.); +#386925 = VERTEX_POINT('',#386926); +#386926 = CARTESIAN_POINT('',(125.9,-84.935,1.55)); +#386927 = CIRCLE('',#386928,0.139999827125); +#386928 = AXIS2_PLACEMENT_3D('',#386929,#386930,#386931); +#386929 = CARTESIAN_POINT('',(125.90000017287,-84.79500017287,1.55)); +#386930 = DIRECTION('',(0.,0.,-1.)); +#386931 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#386932 = ORIENTED_EDGE('',*,*,#386933,.F.); +#386933 = EDGE_CURVE('',#386934,#386925,#386936,.T.); +#386934 = VERTEX_POINT('',#386935); +#386935 = CARTESIAN_POINT('',(125.9,-84.935,1.51)); +#386936 = LINE('',#386937,#386938); +#386937 = CARTESIAN_POINT('',(125.9,-84.935,1.51)); +#386938 = VECTOR('',#386939,1.); +#386939 = DIRECTION('',(0.,0.,1.)); +#386940 = ORIENTED_EDGE('',*,*,#386941,.F.); +#386941 = EDGE_CURVE('',#386902,#386934,#386942,.T.); +#386942 = CIRCLE('',#386943,0.139999827125); +#386943 = AXIS2_PLACEMENT_3D('',#386944,#386945,#386946); +#386944 = CARTESIAN_POINT('',(125.90000017287,-84.79500017287,1.51)); +#386945 = DIRECTION('',(0.,0.,-1.)); +#386946 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#386947 = CYLINDRICAL_SURFACE('',#386948,0.139999827125); +#386948 = AXIS2_PLACEMENT_3D('',#386949,#386950,#386951); +#386949 = CARTESIAN_POINT('',(125.90000017287,-84.79500017287,1.51)); +#386950 = DIRECTION('',(0.,0.,-1.)); +#386951 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#386952 = ADVANCED_FACE('',(#386953),#386978,.T.); +#386953 = FACE_BOUND('',#386954,.T.); +#386954 = EDGE_LOOP('',(#386955,#386956,#386964,#386972)); +#386955 = ORIENTED_EDGE('',*,*,#386933,.T.); +#386956 = ORIENTED_EDGE('',*,*,#386957,.T.); +#386957 = EDGE_CURVE('',#386925,#386958,#386960,.T.); +#386958 = VERTEX_POINT('',#386959); +#386959 = CARTESIAN_POINT('',(125.62,-84.935,1.55)); +#386960 = LINE('',#386961,#386962); +#386961 = CARTESIAN_POINT('',(125.9,-84.935,1.55)); +#386962 = VECTOR('',#386963,1.); +#386963 = DIRECTION('',(-1.,0.,0.)); +#386964 = ORIENTED_EDGE('',*,*,#386965,.F.); +#386965 = EDGE_CURVE('',#386966,#386958,#386968,.T.); +#386966 = VERTEX_POINT('',#386967); +#386967 = CARTESIAN_POINT('',(125.62,-84.935,1.51)); +#386968 = LINE('',#386969,#386970); +#386969 = CARTESIAN_POINT('',(125.62,-84.935,1.51)); +#386970 = VECTOR('',#386971,1.); +#386971 = DIRECTION('',(0.,0.,1.)); +#386972 = ORIENTED_EDGE('',*,*,#386973,.F.); +#386973 = EDGE_CURVE('',#386934,#386966,#386974,.T.); +#386974 = LINE('',#386975,#386976); +#386975 = CARTESIAN_POINT('',(125.9,-84.935,1.51)); +#386976 = VECTOR('',#386977,1.); +#386977 = DIRECTION('',(-1.,0.,0.)); +#386978 = PLANE('',#386979); +#386979 = AXIS2_PLACEMENT_3D('',#386980,#386981,#386982); +#386980 = CARTESIAN_POINT('',(125.9,-84.935,1.51)); +#386981 = DIRECTION('',(0.,-1.,0.)); +#386982 = DIRECTION('',(-1.,0.,0.)); +#386983 = ADVANCED_FACE('',(#386984),#387011,.T.); +#386984 = FACE_BOUND('',#386985,.T.); +#386985 = EDGE_LOOP('',(#386986,#386987,#386996,#387004)); +#386986 = ORIENTED_EDGE('',*,*,#386965,.T.); +#386987 = ORIENTED_EDGE('',*,*,#386988,.T.); +#386988 = EDGE_CURVE('',#386958,#386989,#386991,.T.); +#386989 = VERTEX_POINT('',#386990); +#386990 = CARTESIAN_POINT('',(125.48,-84.795,1.55)); +#386991 = CIRCLE('',#386992,0.139999827125); +#386992 = AXIS2_PLACEMENT_3D('',#386993,#386994,#386995); +#386993 = CARTESIAN_POINT('',(125.61999982712,-84.79500017287,1.55)); +#386994 = DIRECTION('',(0.,0.,-1.)); +#386995 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#386996 = ORIENTED_EDGE('',*,*,#386997,.F.); +#386997 = EDGE_CURVE('',#386998,#386989,#387000,.T.); +#386998 = VERTEX_POINT('',#386999); +#386999 = CARTESIAN_POINT('',(125.48,-84.795,1.51)); +#387000 = LINE('',#387001,#387002); +#387001 = CARTESIAN_POINT('',(125.48,-84.795,1.51)); +#387002 = VECTOR('',#387003,1.); +#387003 = DIRECTION('',(0.,0.,1.)); +#387004 = ORIENTED_EDGE('',*,*,#387005,.F.); +#387005 = EDGE_CURVE('',#386966,#386998,#387006,.T.); +#387006 = CIRCLE('',#387007,0.139999827125); +#387007 = AXIS2_PLACEMENT_3D('',#387008,#387009,#387010); +#387008 = CARTESIAN_POINT('',(125.61999982712,-84.79500017287,1.51)); +#387009 = DIRECTION('',(0.,0.,-1.)); +#387010 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#387011 = CYLINDRICAL_SURFACE('',#387012,0.139999827125); +#387012 = AXIS2_PLACEMENT_3D('',#387013,#387014,#387015); +#387013 = CARTESIAN_POINT('',(125.61999982712,-84.79500017287,1.51)); +#387014 = DIRECTION('',(0.,0.,-1.)); +#387015 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#387016 = ADVANCED_FACE('',(#387017),#387033,.T.); +#387017 = FACE_BOUND('',#387018,.T.); +#387018 = EDGE_LOOP('',(#387019,#387020,#387026,#387027)); +#387019 = ORIENTED_EDGE('',*,*,#386997,.T.); +#387020 = ORIENTED_EDGE('',*,*,#387021,.T.); +#387021 = EDGE_CURVE('',#386989,#386789,#387022,.T.); +#387022 = LINE('',#387023,#387024); +#387023 = CARTESIAN_POINT('',(125.48,-84.795,1.55)); +#387024 = VECTOR('',#387025,1.); +#387025 = DIRECTION('',(0.,1.,0.)); +#387026 = ORIENTED_EDGE('',*,*,#386786,.F.); +#387027 = ORIENTED_EDGE('',*,*,#387028,.F.); +#387028 = EDGE_CURVE('',#386998,#386787,#387029,.T.); +#387029 = LINE('',#387030,#387031); +#387030 = CARTESIAN_POINT('',(125.48,-84.795,1.51)); +#387031 = VECTOR('',#387032,1.); +#387032 = DIRECTION('',(0.,1.,0.)); +#387033 = PLANE('',#387034); +#387034 = AXIS2_PLACEMENT_3D('',#387035,#387036,#387037); +#387035 = CARTESIAN_POINT('',(125.48,-84.795,1.51)); +#387036 = DIRECTION('',(-1.,0.,0.)); +#387037 = DIRECTION('',(0.,1.,0.)); +#387038 = ADVANCED_FACE('',(#387039),#387049,.F.); +#387039 = FACE_BOUND('',#387040,.T.); +#387040 = EDGE_LOOP('',(#387041,#387042,#387043,#387044,#387045,#387046, + #387047,#387048)); +#387041 = ORIENTED_EDGE('',*,*,#386813,.T.); +#387042 = ORIENTED_EDGE('',*,*,#386845,.T.); +#387043 = ORIENTED_EDGE('',*,*,#386877,.T.); +#387044 = ORIENTED_EDGE('',*,*,#386909,.T.); +#387045 = ORIENTED_EDGE('',*,*,#386941,.T.); +#387046 = ORIENTED_EDGE('',*,*,#386973,.T.); +#387047 = ORIENTED_EDGE('',*,*,#387005,.T.); +#387048 = ORIENTED_EDGE('',*,*,#387028,.T.); +#387049 = PLANE('',#387050); +#387050 = AXIS2_PLACEMENT_3D('',#387051,#387052,#387053); +#387051 = CARTESIAN_POINT('',(0.,0.,1.51)); +#387052 = DIRECTION('',(0.,0.,1.)); +#387053 = DIRECTION('',(1.,0.,-0.)); +#387054 = ADVANCED_FACE('',(#387055),#387065,.T.); +#387055 = FACE_BOUND('',#387056,.F.); +#387056 = EDGE_LOOP('',(#387057,#387058,#387059,#387060,#387061,#387062, + #387063,#387064)); +#387057 = ORIENTED_EDGE('',*,*,#386796,.T.); +#387058 = ORIENTED_EDGE('',*,*,#386829,.T.); +#387059 = ORIENTED_EDGE('',*,*,#386860,.T.); +#387060 = ORIENTED_EDGE('',*,*,#386893,.T.); +#387061 = ORIENTED_EDGE('',*,*,#386924,.T.); +#387062 = ORIENTED_EDGE('',*,*,#386957,.T.); +#387063 = ORIENTED_EDGE('',*,*,#386988,.T.); +#387064 = ORIENTED_EDGE('',*,*,#387021,.T.); +#387065 = PLANE('',#387066); +#387066 = AXIS2_PLACEMENT_3D('',#387067,#387068,#387069); +#387067 = CARTESIAN_POINT('',(0.,0.,1.55)); +#387068 = DIRECTION('',(0.,0.,1.)); +#387069 = DIRECTION('',(1.,0.,-0.)); +#387070 = MANIFOLD_SOLID_BREP('',#387071); +#387071 = CLOSED_SHELL('',(#387072,#387114,#387145,#387178,#387209, + #387242,#387273,#387306,#387328,#387344)); +#387072 = ADVANCED_FACE('',(#387073),#387109,.T.); +#387073 = FACE_BOUND('',#387074,.T.); +#387074 = EDGE_LOOP('',(#387075,#387085,#387094,#387102)); +#387075 = ORIENTED_EDGE('',*,*,#387076,.T.); +#387076 = EDGE_CURVE('',#387077,#387079,#387081,.T.); +#387077 = VERTEX_POINT('',#387078); +#387078 = CARTESIAN_POINT('',(151.15,-150.2,1.51)); +#387079 = VERTEX_POINT('',#387080); +#387080 = CARTESIAN_POINT('',(151.15,-150.2,1.55)); +#387081 = LINE('',#387082,#387083); +#387082 = CARTESIAN_POINT('',(151.15,-150.2,1.51)); +#387083 = VECTOR('',#387084,1.); +#387084 = DIRECTION('',(0.,0.,1.)); +#387085 = ORIENTED_EDGE('',*,*,#387086,.T.); +#387086 = EDGE_CURVE('',#387079,#387087,#387089,.T.); +#387087 = VERTEX_POINT('',#387088); +#387088 = CARTESIAN_POINT('',(151.4,-149.95,1.55)); +#387089 = CIRCLE('',#387090,0.249998959685); +#387090 = AXIS2_PLACEMENT_3D('',#387091,#387092,#387093); +#387091 = CARTESIAN_POINT('',(151.39999895968,-150.1999989596,1.55)); +#387092 = DIRECTION('',(0.,0.,-1.)); +#387093 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#387094 = ORIENTED_EDGE('',*,*,#387095,.F.); +#387095 = EDGE_CURVE('',#387096,#387087,#387098,.T.); +#387096 = VERTEX_POINT('',#387097); +#387097 = CARTESIAN_POINT('',(151.4,-149.95,1.51)); +#387098 = LINE('',#387099,#387100); +#387099 = CARTESIAN_POINT('',(151.4,-149.95,1.51)); +#387100 = VECTOR('',#387101,1.); +#387101 = DIRECTION('',(0.,0.,1.)); +#387102 = ORIENTED_EDGE('',*,*,#387103,.F.); +#387103 = EDGE_CURVE('',#387077,#387096,#387104,.T.); +#387104 = CIRCLE('',#387105,0.249998959685); +#387105 = AXIS2_PLACEMENT_3D('',#387106,#387107,#387108); +#387106 = CARTESIAN_POINT('',(151.39999895968,-150.1999989596,1.51)); +#387107 = DIRECTION('',(0.,0.,-1.)); +#387108 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#387109 = CYLINDRICAL_SURFACE('',#387110,0.249998959685); +#387110 = AXIS2_PLACEMENT_3D('',#387111,#387112,#387113); +#387111 = CARTESIAN_POINT('',(151.39999895968,-150.1999989596,1.51)); +#387112 = DIRECTION('',(0.,0.,-1.)); +#387113 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#387114 = ADVANCED_FACE('',(#387115),#387140,.T.); +#387115 = FACE_BOUND('',#387116,.T.); +#387116 = EDGE_LOOP('',(#387117,#387118,#387126,#387134)); +#387117 = ORIENTED_EDGE('',*,*,#387095,.T.); +#387118 = ORIENTED_EDGE('',*,*,#387119,.T.); +#387119 = EDGE_CURVE('',#387087,#387120,#387122,.T.); +#387120 = VERTEX_POINT('',#387121); +#387121 = CARTESIAN_POINT('',(151.9,-149.95,1.55)); +#387122 = LINE('',#387123,#387124); +#387123 = CARTESIAN_POINT('',(151.4,-149.95,1.55)); +#387124 = VECTOR('',#387125,1.); +#387125 = DIRECTION('',(1.,0.,0.)); +#387126 = ORIENTED_EDGE('',*,*,#387127,.F.); +#387127 = EDGE_CURVE('',#387128,#387120,#387130,.T.); +#387128 = VERTEX_POINT('',#387129); +#387129 = CARTESIAN_POINT('',(151.9,-149.95,1.51)); +#387130 = LINE('',#387131,#387132); +#387131 = CARTESIAN_POINT('',(151.9,-149.95,1.51)); +#387132 = VECTOR('',#387133,1.); +#387133 = DIRECTION('',(0.,0.,1.)); +#387134 = ORIENTED_EDGE('',*,*,#387135,.F.); +#387135 = EDGE_CURVE('',#387096,#387128,#387136,.T.); +#387136 = LINE('',#387137,#387138); +#387137 = CARTESIAN_POINT('',(151.4,-149.95,1.51)); +#387138 = VECTOR('',#387139,1.); +#387139 = DIRECTION('',(1.,0.,0.)); +#387140 = PLANE('',#387141); +#387141 = AXIS2_PLACEMENT_3D('',#387142,#387143,#387144); +#387142 = CARTESIAN_POINT('',(151.4,-149.95,1.51)); +#387143 = DIRECTION('',(0.,1.,0.)); +#387144 = DIRECTION('',(1.,0.,0.)); +#387145 = ADVANCED_FACE('',(#387146),#387173,.T.); +#387146 = FACE_BOUND('',#387147,.T.); +#387147 = EDGE_LOOP('',(#387148,#387149,#387158,#387166)); +#387148 = ORIENTED_EDGE('',*,*,#387127,.T.); +#387149 = ORIENTED_EDGE('',*,*,#387150,.T.); +#387150 = EDGE_CURVE('',#387120,#387151,#387153,.T.); +#387151 = VERTEX_POINT('',#387152); +#387152 = CARTESIAN_POINT('',(152.15,-150.2,1.55)); +#387153 = CIRCLE('',#387154,0.249998959685); +#387154 = AXIS2_PLACEMENT_3D('',#387155,#387156,#387157); +#387155 = CARTESIAN_POINT('',(151.90000104031,-150.1999989596,1.55)); +#387156 = DIRECTION('',(0.,0.,-1.)); +#387157 = DIRECTION('',(-4.161285609691E-06,0.999999999991,0.)); +#387158 = ORIENTED_EDGE('',*,*,#387159,.F.); +#387159 = EDGE_CURVE('',#387160,#387151,#387162,.T.); +#387160 = VERTEX_POINT('',#387161); +#387161 = CARTESIAN_POINT('',(152.15,-150.2,1.51)); +#387162 = LINE('',#387163,#387164); +#387163 = CARTESIAN_POINT('',(152.15,-150.2,1.51)); +#387164 = VECTOR('',#387165,1.); +#387165 = DIRECTION('',(0.,0.,1.)); +#387166 = ORIENTED_EDGE('',*,*,#387167,.F.); +#387167 = EDGE_CURVE('',#387128,#387160,#387168,.T.); +#387168 = CIRCLE('',#387169,0.249998959685); +#387169 = AXIS2_PLACEMENT_3D('',#387170,#387171,#387172); +#387170 = CARTESIAN_POINT('',(151.90000104031,-150.1999989596,1.51)); +#387171 = DIRECTION('',(0.,0.,-1.)); +#387172 = DIRECTION('',(-4.161285609691E-06,0.999999999991,0.)); +#387173 = CYLINDRICAL_SURFACE('',#387174,0.249998959685); +#387174 = AXIS2_PLACEMENT_3D('',#387175,#387176,#387177); +#387175 = CARTESIAN_POINT('',(151.90000104031,-150.1999989596,1.51)); +#387176 = DIRECTION('',(0.,0.,-1.)); +#387177 = DIRECTION('',(-4.161285609691E-06,0.999999999991,0.)); +#387178 = ADVANCED_FACE('',(#387179),#387204,.T.); +#387179 = FACE_BOUND('',#387180,.T.); +#387180 = EDGE_LOOP('',(#387181,#387182,#387190,#387198)); +#387181 = ORIENTED_EDGE('',*,*,#387159,.T.); +#387182 = ORIENTED_EDGE('',*,*,#387183,.T.); +#387183 = EDGE_CURVE('',#387151,#387184,#387186,.T.); +#387184 = VERTEX_POINT('',#387185); +#387185 = CARTESIAN_POINT('',(152.15,-151.15,1.55)); +#387186 = LINE('',#387187,#387188); +#387187 = CARTESIAN_POINT('',(152.15,-150.2,1.55)); +#387188 = VECTOR('',#387189,1.); +#387189 = DIRECTION('',(0.,-1.,0.)); +#387190 = ORIENTED_EDGE('',*,*,#387191,.F.); +#387191 = EDGE_CURVE('',#387192,#387184,#387194,.T.); +#387192 = VERTEX_POINT('',#387193); +#387193 = CARTESIAN_POINT('',(152.15,-151.15,1.51)); +#387194 = LINE('',#387195,#387196); +#387195 = CARTESIAN_POINT('',(152.15,-151.15,1.51)); +#387196 = VECTOR('',#387197,1.); +#387197 = DIRECTION('',(0.,0.,1.)); +#387198 = ORIENTED_EDGE('',*,*,#387199,.F.); +#387199 = EDGE_CURVE('',#387160,#387192,#387200,.T.); +#387200 = LINE('',#387201,#387202); +#387201 = CARTESIAN_POINT('',(152.15,-150.2,1.51)); +#387202 = VECTOR('',#387203,1.); +#387203 = DIRECTION('',(0.,-1.,0.)); +#387204 = PLANE('',#387205); +#387205 = AXIS2_PLACEMENT_3D('',#387206,#387207,#387208); +#387206 = CARTESIAN_POINT('',(152.15,-150.2,1.51)); +#387207 = DIRECTION('',(1.,0.,-0.)); +#387208 = DIRECTION('',(0.,-1.,0.)); +#387209 = ADVANCED_FACE('',(#387210),#387237,.T.); +#387210 = FACE_BOUND('',#387211,.T.); +#387211 = EDGE_LOOP('',(#387212,#387213,#387222,#387230)); +#387212 = ORIENTED_EDGE('',*,*,#387191,.T.); +#387213 = ORIENTED_EDGE('',*,*,#387214,.T.); +#387214 = EDGE_CURVE('',#387184,#387215,#387217,.T.); +#387215 = VERTEX_POINT('',#387216); +#387216 = CARTESIAN_POINT('',(151.9,-151.4,1.55)); +#387217 = CIRCLE('',#387218,0.249998959685); +#387218 = AXIS2_PLACEMENT_3D('',#387219,#387220,#387221); +#387219 = CARTESIAN_POINT('',(151.90000104031,-151.1500010403,1.55)); +#387220 = DIRECTION('',(0.,0.,-1.)); +#387221 = DIRECTION('',(0.999999999991,4.161285609691E-06,0.)); +#387222 = ORIENTED_EDGE('',*,*,#387223,.F.); +#387223 = EDGE_CURVE('',#387224,#387215,#387226,.T.); +#387224 = VERTEX_POINT('',#387225); +#387225 = CARTESIAN_POINT('',(151.9,-151.4,1.51)); +#387226 = LINE('',#387227,#387228); +#387227 = CARTESIAN_POINT('',(151.9,-151.4,1.51)); +#387228 = VECTOR('',#387229,1.); +#387229 = DIRECTION('',(0.,0.,1.)); +#387230 = ORIENTED_EDGE('',*,*,#387231,.F.); +#387231 = EDGE_CURVE('',#387192,#387224,#387232,.T.); +#387232 = CIRCLE('',#387233,0.249998959685); +#387233 = AXIS2_PLACEMENT_3D('',#387234,#387235,#387236); +#387234 = CARTESIAN_POINT('',(151.90000104031,-151.1500010403,1.51)); +#387235 = DIRECTION('',(0.,0.,-1.)); +#387236 = DIRECTION('',(0.999999999991,4.161285609691E-06,0.)); +#387237 = CYLINDRICAL_SURFACE('',#387238,0.249998959685); +#387238 = AXIS2_PLACEMENT_3D('',#387239,#387240,#387241); +#387239 = CARTESIAN_POINT('',(151.90000104031,-151.1500010403,1.51)); +#387240 = DIRECTION('',(0.,0.,-1.)); +#387241 = DIRECTION('',(0.999999999991,4.161285609691E-06,0.)); +#387242 = ADVANCED_FACE('',(#387243),#387268,.T.); +#387243 = FACE_BOUND('',#387244,.T.); +#387244 = EDGE_LOOP('',(#387245,#387246,#387254,#387262)); +#387245 = ORIENTED_EDGE('',*,*,#387223,.T.); +#387246 = ORIENTED_EDGE('',*,*,#387247,.T.); +#387247 = EDGE_CURVE('',#387215,#387248,#387250,.T.); +#387248 = VERTEX_POINT('',#387249); +#387249 = CARTESIAN_POINT('',(151.4,-151.4,1.55)); +#387250 = LINE('',#387251,#387252); +#387251 = CARTESIAN_POINT('',(151.9,-151.4,1.55)); +#387252 = VECTOR('',#387253,1.); +#387253 = DIRECTION('',(-1.,0.,0.)); +#387254 = ORIENTED_EDGE('',*,*,#387255,.F.); +#387255 = EDGE_CURVE('',#387256,#387248,#387258,.T.); +#387256 = VERTEX_POINT('',#387257); +#387257 = CARTESIAN_POINT('',(151.4,-151.4,1.51)); +#387258 = LINE('',#387259,#387260); +#387259 = CARTESIAN_POINT('',(151.4,-151.4,1.51)); +#387260 = VECTOR('',#387261,1.); +#387261 = DIRECTION('',(0.,0.,1.)); +#387262 = ORIENTED_EDGE('',*,*,#387263,.F.); +#387263 = EDGE_CURVE('',#387224,#387256,#387264,.T.); +#387264 = LINE('',#387265,#387266); +#387265 = CARTESIAN_POINT('',(151.9,-151.4,1.51)); +#387266 = VECTOR('',#387267,1.); +#387267 = DIRECTION('',(-1.,0.,0.)); +#387268 = PLANE('',#387269); +#387269 = AXIS2_PLACEMENT_3D('',#387270,#387271,#387272); +#387270 = CARTESIAN_POINT('',(151.9,-151.4,1.51)); +#387271 = DIRECTION('',(0.,-1.,0.)); +#387272 = DIRECTION('',(-1.,0.,0.)); +#387273 = ADVANCED_FACE('',(#387274),#387301,.T.); +#387274 = FACE_BOUND('',#387275,.T.); +#387275 = EDGE_LOOP('',(#387276,#387277,#387286,#387294)); +#387276 = ORIENTED_EDGE('',*,*,#387255,.T.); +#387277 = ORIENTED_EDGE('',*,*,#387278,.T.); +#387278 = EDGE_CURVE('',#387248,#387279,#387281,.T.); +#387279 = VERTEX_POINT('',#387280); +#387280 = CARTESIAN_POINT('',(151.15,-151.15,1.55)); +#387281 = CIRCLE('',#387282,0.249998959685); +#387282 = AXIS2_PLACEMENT_3D('',#387283,#387284,#387285); +#387283 = CARTESIAN_POINT('',(151.39999895968,-151.1500010403,1.55)); +#387284 = DIRECTION('',(0.,0.,-1.)); +#387285 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#387286 = ORIENTED_EDGE('',*,*,#387287,.F.); +#387287 = EDGE_CURVE('',#387288,#387279,#387290,.T.); +#387288 = VERTEX_POINT('',#387289); +#387289 = CARTESIAN_POINT('',(151.15,-151.15,1.51)); +#387290 = LINE('',#387291,#387292); +#387291 = CARTESIAN_POINT('',(151.15,-151.15,1.51)); +#387292 = VECTOR('',#387293,1.); +#387293 = DIRECTION('',(0.,0.,1.)); +#387294 = ORIENTED_EDGE('',*,*,#387295,.F.); +#387295 = EDGE_CURVE('',#387256,#387288,#387296,.T.); +#387296 = CIRCLE('',#387297,0.249998959685); +#387297 = AXIS2_PLACEMENT_3D('',#387298,#387299,#387300); +#387298 = CARTESIAN_POINT('',(151.39999895968,-151.1500010403,1.51)); +#387299 = DIRECTION('',(0.,0.,-1.)); +#387300 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#387301 = CYLINDRICAL_SURFACE('',#387302,0.249998959685); +#387302 = AXIS2_PLACEMENT_3D('',#387303,#387304,#387305); +#387303 = CARTESIAN_POINT('',(151.39999895968,-151.1500010403,1.51)); +#387304 = DIRECTION('',(0.,0.,-1.)); +#387305 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#387306 = ADVANCED_FACE('',(#387307),#387323,.T.); +#387307 = FACE_BOUND('',#387308,.T.); +#387308 = EDGE_LOOP('',(#387309,#387310,#387316,#387317)); +#387309 = ORIENTED_EDGE('',*,*,#387287,.T.); +#387310 = ORIENTED_EDGE('',*,*,#387311,.T.); +#387311 = EDGE_CURVE('',#387279,#387079,#387312,.T.); +#387312 = LINE('',#387313,#387314); +#387313 = CARTESIAN_POINT('',(151.15,-151.15,1.55)); +#387314 = VECTOR('',#387315,1.); +#387315 = DIRECTION('',(0.,1.,0.)); +#387316 = ORIENTED_EDGE('',*,*,#387076,.F.); +#387317 = ORIENTED_EDGE('',*,*,#387318,.F.); +#387318 = EDGE_CURVE('',#387288,#387077,#387319,.T.); +#387319 = LINE('',#387320,#387321); +#387320 = CARTESIAN_POINT('',(151.15,-151.15,1.51)); +#387321 = VECTOR('',#387322,1.); +#387322 = DIRECTION('',(0.,1.,0.)); +#387323 = PLANE('',#387324); +#387324 = AXIS2_PLACEMENT_3D('',#387325,#387326,#387327); +#387325 = CARTESIAN_POINT('',(151.15,-151.15,1.51)); +#387326 = DIRECTION('',(-1.,0.,0.)); +#387327 = DIRECTION('',(0.,1.,0.)); +#387328 = ADVANCED_FACE('',(#387329),#387339,.F.); +#387329 = FACE_BOUND('',#387330,.T.); +#387330 = EDGE_LOOP('',(#387331,#387332,#387333,#387334,#387335,#387336, + #387337,#387338)); +#387331 = ORIENTED_EDGE('',*,*,#387103,.T.); +#387332 = ORIENTED_EDGE('',*,*,#387135,.T.); +#387333 = ORIENTED_EDGE('',*,*,#387167,.T.); +#387334 = ORIENTED_EDGE('',*,*,#387199,.T.); +#387335 = ORIENTED_EDGE('',*,*,#387231,.T.); +#387336 = ORIENTED_EDGE('',*,*,#387263,.T.); +#387337 = ORIENTED_EDGE('',*,*,#387295,.T.); +#387338 = ORIENTED_EDGE('',*,*,#387318,.T.); +#387339 = PLANE('',#387340); +#387340 = AXIS2_PLACEMENT_3D('',#387341,#387342,#387343); +#387341 = CARTESIAN_POINT('',(0.,0.,1.51)); +#387342 = DIRECTION('',(0.,0.,1.)); +#387343 = DIRECTION('',(1.,0.,-0.)); +#387344 = ADVANCED_FACE('',(#387345),#387355,.T.); +#387345 = FACE_BOUND('',#387346,.F.); +#387346 = EDGE_LOOP('',(#387347,#387348,#387349,#387350,#387351,#387352, + #387353,#387354)); +#387347 = ORIENTED_EDGE('',*,*,#387086,.T.); +#387348 = ORIENTED_EDGE('',*,*,#387119,.T.); +#387349 = ORIENTED_EDGE('',*,*,#387150,.T.); +#387350 = ORIENTED_EDGE('',*,*,#387183,.T.); +#387351 = ORIENTED_EDGE('',*,*,#387214,.T.); +#387352 = ORIENTED_EDGE('',*,*,#387247,.T.); +#387353 = ORIENTED_EDGE('',*,*,#387278,.T.); +#387354 = ORIENTED_EDGE('',*,*,#387311,.T.); +#387355 = PLANE('',#387356); +#387356 = AXIS2_PLACEMENT_3D('',#387357,#387358,#387359); +#387357 = CARTESIAN_POINT('',(0.,0.,1.55)); +#387358 = DIRECTION('',(0.,0.,1.)); +#387359 = DIRECTION('',(1.,0.,-0.)); +#387360 = MANIFOLD_SOLID_BREP('',#387361); +#387361 = CLOSED_SHELL('',(#387362,#387404,#387435,#387468,#387499, + #387532,#387563,#387596,#387618,#387634)); +#387362 = ADVANCED_FACE('',(#387363),#387399,.T.); +#387363 = FACE_BOUND('',#387364,.T.); +#387364 = EDGE_LOOP('',(#387365,#387375,#387384,#387392)); +#387365 = ORIENTED_EDGE('',*,*,#387366,.T.); +#387366 = EDGE_CURVE('',#387367,#387369,#387371,.T.); +#387367 = VERTEX_POINT('',#387368); +#387368 = CARTESIAN_POINT('',(151.15,-145.05,1.51)); +#387369 = VERTEX_POINT('',#387370); +#387370 = CARTESIAN_POINT('',(151.15,-145.05,1.55)); +#387371 = LINE('',#387372,#387373); +#387372 = CARTESIAN_POINT('',(151.15,-145.05,1.51)); +#387373 = VECTOR('',#387374,1.); +#387374 = DIRECTION('',(0.,0.,1.)); +#387375 = ORIENTED_EDGE('',*,*,#387376,.T.); +#387376 = EDGE_CURVE('',#387369,#387377,#387379,.T.); +#387377 = VERTEX_POINT('',#387378); +#387378 = CARTESIAN_POINT('',(151.4,-144.8,1.55)); +#387379 = CIRCLE('',#387380,0.249998959685); +#387380 = AXIS2_PLACEMENT_3D('',#387381,#387382,#387383); +#387381 = CARTESIAN_POINT('',(151.39999895968,-145.0499989596,1.55)); +#387382 = DIRECTION('',(0.,0.,-1.)); +#387383 = DIRECTION('',(-0.999999999991,-4.161286064442E-06,-0.)); +#387384 = ORIENTED_EDGE('',*,*,#387385,.F.); +#387385 = EDGE_CURVE('',#387386,#387377,#387388,.T.); +#387386 = VERTEX_POINT('',#387387); +#387387 = CARTESIAN_POINT('',(151.4,-144.8,1.51)); +#387388 = LINE('',#387389,#387390); +#387389 = CARTESIAN_POINT('',(151.4,-144.8,1.51)); +#387390 = VECTOR('',#387391,1.); +#387391 = DIRECTION('',(0.,0.,1.)); +#387392 = ORIENTED_EDGE('',*,*,#387393,.F.); +#387393 = EDGE_CURVE('',#387367,#387386,#387394,.T.); +#387394 = CIRCLE('',#387395,0.249998959685); +#387395 = AXIS2_PLACEMENT_3D('',#387396,#387397,#387398); +#387396 = CARTESIAN_POINT('',(151.39999895968,-145.0499989596,1.51)); +#387397 = DIRECTION('',(0.,0.,-1.)); +#387398 = DIRECTION('',(-0.999999999991,-4.161286064442E-06,-0.)); +#387399 = CYLINDRICAL_SURFACE('',#387400,0.249998959685); +#387400 = AXIS2_PLACEMENT_3D('',#387401,#387402,#387403); +#387401 = CARTESIAN_POINT('',(151.39999895968,-145.0499989596,1.51)); +#387402 = DIRECTION('',(0.,0.,-1.)); +#387403 = DIRECTION('',(-0.999999999991,-4.161286064442E-06,-0.)); +#387404 = ADVANCED_FACE('',(#387405),#387430,.T.); +#387405 = FACE_BOUND('',#387406,.T.); +#387406 = EDGE_LOOP('',(#387407,#387408,#387416,#387424)); +#387407 = ORIENTED_EDGE('',*,*,#387385,.T.); +#387408 = ORIENTED_EDGE('',*,*,#387409,.T.); +#387409 = EDGE_CURVE('',#387377,#387410,#387412,.T.); +#387410 = VERTEX_POINT('',#387411); +#387411 = CARTESIAN_POINT('',(151.9,-144.8,1.55)); +#387412 = LINE('',#387413,#387414); +#387413 = CARTESIAN_POINT('',(151.4,-144.8,1.55)); +#387414 = VECTOR('',#387415,1.); +#387415 = DIRECTION('',(1.,0.,0.)); +#387416 = ORIENTED_EDGE('',*,*,#387417,.F.); +#387417 = EDGE_CURVE('',#387418,#387410,#387420,.T.); +#387418 = VERTEX_POINT('',#387419); +#387419 = CARTESIAN_POINT('',(151.9,-144.8,1.51)); +#387420 = LINE('',#387421,#387422); +#387421 = CARTESIAN_POINT('',(151.9,-144.8,1.51)); +#387422 = VECTOR('',#387423,1.); +#387423 = DIRECTION('',(0.,0.,1.)); +#387424 = ORIENTED_EDGE('',*,*,#387425,.F.); +#387425 = EDGE_CURVE('',#387386,#387418,#387426,.T.); +#387426 = LINE('',#387427,#387428); +#387427 = CARTESIAN_POINT('',(151.4,-144.8,1.51)); +#387428 = VECTOR('',#387429,1.); +#387429 = DIRECTION('',(1.,0.,0.)); +#387430 = PLANE('',#387431); +#387431 = AXIS2_PLACEMENT_3D('',#387432,#387433,#387434); +#387432 = CARTESIAN_POINT('',(151.4,-144.8,1.51)); +#387433 = DIRECTION('',(0.,1.,0.)); +#387434 = DIRECTION('',(1.,0.,0.)); +#387435 = ADVANCED_FACE('',(#387436),#387463,.T.); +#387436 = FACE_BOUND('',#387437,.T.); +#387437 = EDGE_LOOP('',(#387438,#387439,#387448,#387456)); +#387438 = ORIENTED_EDGE('',*,*,#387417,.T.); +#387439 = ORIENTED_EDGE('',*,*,#387440,.T.); +#387440 = EDGE_CURVE('',#387410,#387441,#387443,.T.); +#387441 = VERTEX_POINT('',#387442); +#387442 = CARTESIAN_POINT('',(152.15,-145.05,1.55)); +#387443 = CIRCLE('',#387444,0.249998959685); +#387444 = AXIS2_PLACEMENT_3D('',#387445,#387446,#387447); +#387445 = CARTESIAN_POINT('',(151.90000104031,-145.0499989596,1.55)); +#387446 = DIRECTION('',(0.,0.,-1.)); +#387447 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#387448 = ORIENTED_EDGE('',*,*,#387449,.F.); +#387449 = EDGE_CURVE('',#387450,#387441,#387452,.T.); +#387450 = VERTEX_POINT('',#387451); +#387451 = CARTESIAN_POINT('',(152.15,-145.05,1.51)); +#387452 = LINE('',#387453,#387454); +#387453 = CARTESIAN_POINT('',(152.15,-145.05,1.51)); +#387454 = VECTOR('',#387455,1.); +#387455 = DIRECTION('',(0.,0.,1.)); +#387456 = ORIENTED_EDGE('',*,*,#387457,.F.); +#387457 = EDGE_CURVE('',#387418,#387450,#387458,.T.); +#387458 = CIRCLE('',#387459,0.249998959685); +#387459 = AXIS2_PLACEMENT_3D('',#387460,#387461,#387462); +#387460 = CARTESIAN_POINT('',(151.90000104031,-145.0499989596,1.51)); +#387461 = DIRECTION('',(0.,0.,-1.)); +#387462 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#387463 = CYLINDRICAL_SURFACE('',#387464,0.249998959685); +#387464 = AXIS2_PLACEMENT_3D('',#387465,#387466,#387467); +#387465 = CARTESIAN_POINT('',(151.90000104031,-145.0499989596,1.51)); +#387466 = DIRECTION('',(0.,0.,-1.)); +#387467 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#387468 = ADVANCED_FACE('',(#387469),#387494,.T.); +#387469 = FACE_BOUND('',#387470,.T.); +#387470 = EDGE_LOOP('',(#387471,#387472,#387480,#387488)); +#387471 = ORIENTED_EDGE('',*,*,#387449,.T.); +#387472 = ORIENTED_EDGE('',*,*,#387473,.T.); +#387473 = EDGE_CURVE('',#387441,#387474,#387476,.T.); +#387474 = VERTEX_POINT('',#387475); +#387475 = CARTESIAN_POINT('',(152.15,-146.,1.55)); +#387476 = LINE('',#387477,#387478); +#387477 = CARTESIAN_POINT('',(152.15,-145.05,1.55)); +#387478 = VECTOR('',#387479,1.); +#387479 = DIRECTION('',(0.,-1.,0.)); +#387480 = ORIENTED_EDGE('',*,*,#387481,.F.); +#387481 = EDGE_CURVE('',#387482,#387474,#387484,.T.); +#387482 = VERTEX_POINT('',#387483); +#387483 = CARTESIAN_POINT('',(152.15,-146.,1.51)); +#387484 = LINE('',#387485,#387486); +#387485 = CARTESIAN_POINT('',(152.15,-146.,1.51)); +#387486 = VECTOR('',#387487,1.); +#387487 = DIRECTION('',(0.,0.,1.)); +#387488 = ORIENTED_EDGE('',*,*,#387489,.F.); +#387489 = EDGE_CURVE('',#387450,#387482,#387490,.T.); +#387490 = LINE('',#387491,#387492); +#387491 = CARTESIAN_POINT('',(152.15,-145.05,1.51)); +#387492 = VECTOR('',#387493,1.); +#387493 = DIRECTION('',(0.,-1.,0.)); +#387494 = PLANE('',#387495); +#387495 = AXIS2_PLACEMENT_3D('',#387496,#387497,#387498); +#387496 = CARTESIAN_POINT('',(152.15,-145.05,1.51)); +#387497 = DIRECTION('',(1.,0.,-0.)); +#387498 = DIRECTION('',(0.,-1.,0.)); +#387499 = ADVANCED_FACE('',(#387500),#387527,.T.); +#387500 = FACE_BOUND('',#387501,.T.); +#387501 = EDGE_LOOP('',(#387502,#387503,#387512,#387520)); +#387502 = ORIENTED_EDGE('',*,*,#387481,.T.); +#387503 = ORIENTED_EDGE('',*,*,#387504,.T.); +#387504 = EDGE_CURVE('',#387474,#387505,#387507,.T.); +#387505 = VERTEX_POINT('',#387506); +#387506 = CARTESIAN_POINT('',(151.9,-146.25,1.55)); +#387507 = CIRCLE('',#387508,0.249998959685); +#387508 = AXIS2_PLACEMENT_3D('',#387509,#387510,#387511); +#387509 = CARTESIAN_POINT('',(151.90000104031,-146.0000010403,1.55)); +#387510 = DIRECTION('',(0.,0.,-1.)); +#387511 = DIRECTION('',(0.999999999991,4.161285723378E-06,0.)); +#387512 = ORIENTED_EDGE('',*,*,#387513,.F.); +#387513 = EDGE_CURVE('',#387514,#387505,#387516,.T.); +#387514 = VERTEX_POINT('',#387515); +#387515 = CARTESIAN_POINT('',(151.9,-146.25,1.51)); +#387516 = LINE('',#387517,#387518); +#387517 = CARTESIAN_POINT('',(151.9,-146.25,1.51)); +#387518 = VECTOR('',#387519,1.); +#387519 = DIRECTION('',(0.,0.,1.)); +#387520 = ORIENTED_EDGE('',*,*,#387521,.F.); +#387521 = EDGE_CURVE('',#387482,#387514,#387522,.T.); +#387522 = CIRCLE('',#387523,0.249998959685); +#387523 = AXIS2_PLACEMENT_3D('',#387524,#387525,#387526); +#387524 = CARTESIAN_POINT('',(151.90000104031,-146.0000010403,1.51)); +#387525 = DIRECTION('',(0.,0.,-1.)); +#387526 = DIRECTION('',(0.999999999991,4.161285723378E-06,0.)); +#387527 = CYLINDRICAL_SURFACE('',#387528,0.249998959685); +#387528 = AXIS2_PLACEMENT_3D('',#387529,#387530,#387531); +#387529 = CARTESIAN_POINT('',(151.90000104031,-146.0000010403,1.51)); +#387530 = DIRECTION('',(0.,0.,-1.)); +#387531 = DIRECTION('',(0.999999999991,4.161285723378E-06,0.)); +#387532 = ADVANCED_FACE('',(#387533),#387558,.T.); +#387533 = FACE_BOUND('',#387534,.T.); +#387534 = EDGE_LOOP('',(#387535,#387536,#387544,#387552)); +#387535 = ORIENTED_EDGE('',*,*,#387513,.T.); +#387536 = ORIENTED_EDGE('',*,*,#387537,.T.); +#387537 = EDGE_CURVE('',#387505,#387538,#387540,.T.); +#387538 = VERTEX_POINT('',#387539); +#387539 = CARTESIAN_POINT('',(151.4,-146.25,1.55)); +#387540 = LINE('',#387541,#387542); +#387541 = CARTESIAN_POINT('',(151.9,-146.25,1.55)); +#387542 = VECTOR('',#387543,1.); +#387543 = DIRECTION('',(-1.,0.,0.)); +#387544 = ORIENTED_EDGE('',*,*,#387545,.F.); +#387545 = EDGE_CURVE('',#387546,#387538,#387548,.T.); +#387546 = VERTEX_POINT('',#387547); +#387547 = CARTESIAN_POINT('',(151.4,-146.25,1.51)); +#387548 = LINE('',#387549,#387550); +#387549 = CARTESIAN_POINT('',(151.4,-146.25,1.51)); +#387550 = VECTOR('',#387551,1.); +#387551 = DIRECTION('',(0.,0.,1.)); +#387552 = ORIENTED_EDGE('',*,*,#387553,.F.); +#387553 = EDGE_CURVE('',#387514,#387546,#387554,.T.); +#387554 = LINE('',#387555,#387556); +#387555 = CARTESIAN_POINT('',(151.9,-146.25,1.51)); +#387556 = VECTOR('',#387557,1.); +#387557 = DIRECTION('',(-1.,0.,0.)); +#387558 = PLANE('',#387559); +#387559 = AXIS2_PLACEMENT_3D('',#387560,#387561,#387562); +#387560 = CARTESIAN_POINT('',(151.9,-146.25,1.51)); +#387561 = DIRECTION('',(0.,-1.,0.)); +#387562 = DIRECTION('',(-1.,0.,0.)); +#387563 = ADVANCED_FACE('',(#387564),#387591,.T.); +#387564 = FACE_BOUND('',#387565,.T.); +#387565 = EDGE_LOOP('',(#387566,#387567,#387576,#387584)); +#387566 = ORIENTED_EDGE('',*,*,#387545,.T.); +#387567 = ORIENTED_EDGE('',*,*,#387568,.T.); +#387568 = EDGE_CURVE('',#387538,#387569,#387571,.T.); +#387569 = VERTEX_POINT('',#387570); +#387570 = CARTESIAN_POINT('',(151.15,-146.,1.55)); +#387571 = CIRCLE('',#387572,0.249998959685); +#387572 = AXIS2_PLACEMENT_3D('',#387573,#387574,#387575); +#387573 = CARTESIAN_POINT('',(151.39999895968,-146.0000010403,1.55)); +#387574 = DIRECTION('',(0.,0.,-1.)); +#387575 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#387576 = ORIENTED_EDGE('',*,*,#387577,.F.); +#387577 = EDGE_CURVE('',#387578,#387569,#387580,.T.); +#387578 = VERTEX_POINT('',#387579); +#387579 = CARTESIAN_POINT('',(151.15,-146.,1.51)); +#387580 = LINE('',#387581,#387582); +#387581 = CARTESIAN_POINT('',(151.15,-146.,1.51)); +#387582 = VECTOR('',#387583,1.); +#387583 = DIRECTION('',(0.,0.,1.)); +#387584 = ORIENTED_EDGE('',*,*,#387585,.F.); +#387585 = EDGE_CURVE('',#387546,#387578,#387586,.T.); +#387586 = CIRCLE('',#387587,0.249998959685); +#387587 = AXIS2_PLACEMENT_3D('',#387588,#387589,#387590); +#387588 = CARTESIAN_POINT('',(151.39999895968,-146.0000010403,1.51)); +#387589 = DIRECTION('',(0.,0.,-1.)); +#387590 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#387591 = CYLINDRICAL_SURFACE('',#387592,0.249998959685); +#387592 = AXIS2_PLACEMENT_3D('',#387593,#387594,#387595); +#387593 = CARTESIAN_POINT('',(151.39999895968,-146.0000010403,1.51)); +#387594 = DIRECTION('',(0.,0.,-1.)); +#387595 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#387596 = ADVANCED_FACE('',(#387597),#387613,.T.); +#387597 = FACE_BOUND('',#387598,.T.); +#387598 = EDGE_LOOP('',(#387599,#387600,#387606,#387607)); +#387599 = ORIENTED_EDGE('',*,*,#387577,.T.); +#387600 = ORIENTED_EDGE('',*,*,#387601,.T.); +#387601 = EDGE_CURVE('',#387569,#387369,#387602,.T.); +#387602 = LINE('',#387603,#387604); +#387603 = CARTESIAN_POINT('',(151.15,-146.,1.55)); +#387604 = VECTOR('',#387605,1.); +#387605 = DIRECTION('',(0.,1.,0.)); +#387606 = ORIENTED_EDGE('',*,*,#387366,.F.); +#387607 = ORIENTED_EDGE('',*,*,#387608,.F.); +#387608 = EDGE_CURVE('',#387578,#387367,#387609,.T.); +#387609 = LINE('',#387610,#387611); +#387610 = CARTESIAN_POINT('',(151.15,-146.,1.51)); +#387611 = VECTOR('',#387612,1.); +#387612 = DIRECTION('',(0.,1.,0.)); +#387613 = PLANE('',#387614); +#387614 = AXIS2_PLACEMENT_3D('',#387615,#387616,#387617); +#387615 = CARTESIAN_POINT('',(151.15,-146.,1.51)); +#387616 = DIRECTION('',(-1.,0.,0.)); +#387617 = DIRECTION('',(0.,1.,0.)); +#387618 = ADVANCED_FACE('',(#387619),#387629,.F.); +#387619 = FACE_BOUND('',#387620,.T.); +#387620 = EDGE_LOOP('',(#387621,#387622,#387623,#387624,#387625,#387626, + #387627,#387628)); +#387621 = ORIENTED_EDGE('',*,*,#387393,.T.); +#387622 = ORIENTED_EDGE('',*,*,#387425,.T.); +#387623 = ORIENTED_EDGE('',*,*,#387457,.T.); +#387624 = ORIENTED_EDGE('',*,*,#387489,.T.); +#387625 = ORIENTED_EDGE('',*,*,#387521,.T.); +#387626 = ORIENTED_EDGE('',*,*,#387553,.T.); +#387627 = ORIENTED_EDGE('',*,*,#387585,.T.); +#387628 = ORIENTED_EDGE('',*,*,#387608,.T.); +#387629 = PLANE('',#387630); +#387630 = AXIS2_PLACEMENT_3D('',#387631,#387632,#387633); +#387631 = CARTESIAN_POINT('',(0.,0.,1.51)); +#387632 = DIRECTION('',(0.,0.,1.)); +#387633 = DIRECTION('',(1.,0.,-0.)); +#387634 = ADVANCED_FACE('',(#387635),#387645,.T.); +#387635 = FACE_BOUND('',#387636,.F.); +#387636 = EDGE_LOOP('',(#387637,#387638,#387639,#387640,#387641,#387642, + #387643,#387644)); +#387637 = ORIENTED_EDGE('',*,*,#387376,.T.); +#387638 = ORIENTED_EDGE('',*,*,#387409,.T.); +#387639 = ORIENTED_EDGE('',*,*,#387440,.T.); +#387640 = ORIENTED_EDGE('',*,*,#387473,.T.); +#387641 = ORIENTED_EDGE('',*,*,#387504,.T.); +#387642 = ORIENTED_EDGE('',*,*,#387537,.T.); +#387643 = ORIENTED_EDGE('',*,*,#387568,.T.); +#387644 = ORIENTED_EDGE('',*,*,#387601,.T.); +#387645 = PLANE('',#387646); +#387646 = AXIS2_PLACEMENT_3D('',#387647,#387648,#387649); +#387647 = CARTESIAN_POINT('',(0.,0.,1.55)); +#387648 = DIRECTION('',(0.,0.,1.)); +#387649 = DIRECTION('',(1.,0.,-0.)); +#387650 = MANIFOLD_SOLID_BREP('',#387651); +#387651 = CLOSED_SHELL('',(#387652,#387694,#387725,#387758,#387789, + #387822,#387853,#387886,#387908,#387924)); +#387652 = ADVANCED_FACE('',(#387653),#387689,.T.); +#387653 = FACE_BOUND('',#387654,.T.); +#387654 = EDGE_LOOP('',(#387655,#387665,#387674,#387682)); +#387655 = ORIENTED_EDGE('',*,*,#387656,.T.); +#387656 = EDGE_CURVE('',#387657,#387659,#387661,.T.); +#387657 = VERTEX_POINT('',#387658); +#387658 = CARTESIAN_POINT('',(151.4,-100.375,1.51)); +#387659 = VERTEX_POINT('',#387660); +#387660 = CARTESIAN_POINT('',(151.4,-100.375,1.55)); +#387661 = LINE('',#387662,#387663); +#387662 = CARTESIAN_POINT('',(151.4,-100.375,1.51)); +#387663 = VECTOR('',#387664,1.); +#387664 = DIRECTION('',(0.,0.,1.)); +#387665 = ORIENTED_EDGE('',*,*,#387666,.T.); +#387666 = EDGE_CURVE('',#387659,#387667,#387669,.T.); +#387667 = VERTEX_POINT('',#387668); +#387668 = CARTESIAN_POINT('',(151.55,-100.225,1.55)); +#387669 = CIRCLE('',#387670,0.150000058649); +#387670 = AXIS2_PLACEMENT_3D('',#387671,#387672,#387673); +#387671 = CARTESIAN_POINT('',(151.55000005864,-100.3750000586,1.55)); +#387672 = DIRECTION('',(0.,0.,-1.)); +#387673 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#387674 = ORIENTED_EDGE('',*,*,#387675,.F.); +#387675 = EDGE_CURVE('',#387676,#387667,#387678,.T.); +#387676 = VERTEX_POINT('',#387677); +#387677 = CARTESIAN_POINT('',(151.55,-100.225,1.51)); +#387678 = LINE('',#387679,#387680); +#387679 = CARTESIAN_POINT('',(151.55,-100.225,1.51)); +#387680 = VECTOR('',#387681,1.); +#387681 = DIRECTION('',(0.,0.,1.)); +#387682 = ORIENTED_EDGE('',*,*,#387683,.F.); +#387683 = EDGE_CURVE('',#387657,#387676,#387684,.T.); +#387684 = CIRCLE('',#387685,0.150000058649); +#387685 = AXIS2_PLACEMENT_3D('',#387686,#387687,#387688); +#387686 = CARTESIAN_POINT('',(151.55000005864,-100.3750000586,1.51)); +#387687 = DIRECTION('',(0.,0.,-1.)); +#387688 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#387689 = CYLINDRICAL_SURFACE('',#387690,0.150000058649); +#387690 = AXIS2_PLACEMENT_3D('',#387691,#387692,#387693); +#387691 = CARTESIAN_POINT('',(151.55000005864,-100.3750000586,1.51)); +#387692 = DIRECTION('',(0.,0.,-1.)); +#387693 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#387694 = ADVANCED_FACE('',(#387695),#387720,.T.); +#387695 = FACE_BOUND('',#387696,.T.); +#387696 = EDGE_LOOP('',(#387697,#387698,#387706,#387714)); +#387697 = ORIENTED_EDGE('',*,*,#387675,.T.); +#387698 = ORIENTED_EDGE('',*,*,#387699,.T.); +#387699 = EDGE_CURVE('',#387667,#387700,#387702,.T.); +#387700 = VERTEX_POINT('',#387701); +#387701 = CARTESIAN_POINT('',(153.05,-100.225,1.55)); +#387702 = LINE('',#387703,#387704); +#387703 = CARTESIAN_POINT('',(151.55,-100.225,1.55)); +#387704 = VECTOR('',#387705,1.); +#387705 = DIRECTION('',(1.,0.,0.)); +#387706 = ORIENTED_EDGE('',*,*,#387707,.F.); +#387707 = EDGE_CURVE('',#387708,#387700,#387710,.T.); +#387708 = VERTEX_POINT('',#387709); +#387709 = CARTESIAN_POINT('',(153.05,-100.225,1.51)); +#387710 = LINE('',#387711,#387712); +#387711 = CARTESIAN_POINT('',(153.05,-100.225,1.51)); +#387712 = VECTOR('',#387713,1.); +#387713 = DIRECTION('',(0.,0.,1.)); +#387714 = ORIENTED_EDGE('',*,*,#387715,.F.); +#387715 = EDGE_CURVE('',#387676,#387708,#387716,.T.); +#387716 = LINE('',#387717,#387718); +#387717 = CARTESIAN_POINT('',(151.55,-100.225,1.51)); +#387718 = VECTOR('',#387719,1.); +#387719 = DIRECTION('',(1.,0.,0.)); +#387720 = PLANE('',#387721); +#387721 = AXIS2_PLACEMENT_3D('',#387722,#387723,#387724); +#387722 = CARTESIAN_POINT('',(151.55,-100.225,1.51)); +#387723 = DIRECTION('',(0.,1.,0.)); +#387724 = DIRECTION('',(1.,0.,0.)); +#387725 = ADVANCED_FACE('',(#387726),#387753,.T.); +#387726 = FACE_BOUND('',#387727,.T.); +#387727 = EDGE_LOOP('',(#387728,#387729,#387738,#387746)); +#387728 = ORIENTED_EDGE('',*,*,#387707,.T.); +#387729 = ORIENTED_EDGE('',*,*,#387730,.T.); +#387730 = EDGE_CURVE('',#387700,#387731,#387733,.T.); +#387731 = VERTEX_POINT('',#387732); +#387732 = CARTESIAN_POINT('',(153.2,-100.375,1.55)); +#387733 = CIRCLE('',#387734,0.150000058649); +#387734 = AXIS2_PLACEMENT_3D('',#387735,#387736,#387737); +#387735 = CARTESIAN_POINT('',(153.04999994135,-100.3750000586,1.55)); +#387736 = DIRECTION('',(0.,0.,-1.)); +#387737 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#387738 = ORIENTED_EDGE('',*,*,#387739,.F.); +#387739 = EDGE_CURVE('',#387740,#387731,#387742,.T.); +#387740 = VERTEX_POINT('',#387741); +#387741 = CARTESIAN_POINT('',(153.2,-100.375,1.51)); +#387742 = LINE('',#387743,#387744); +#387743 = CARTESIAN_POINT('',(153.2,-100.375,1.51)); +#387744 = VECTOR('',#387745,1.); +#387745 = DIRECTION('',(0.,0.,1.)); +#387746 = ORIENTED_EDGE('',*,*,#387747,.F.); +#387747 = EDGE_CURVE('',#387708,#387740,#387748,.T.); +#387748 = CIRCLE('',#387749,0.150000058649); +#387749 = AXIS2_PLACEMENT_3D('',#387750,#387751,#387752); +#387750 = CARTESIAN_POINT('',(153.04999994135,-100.3750000586,1.51)); +#387751 = DIRECTION('',(0.,0.,-1.)); +#387752 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#387753 = CYLINDRICAL_SURFACE('',#387754,0.150000058649); +#387754 = AXIS2_PLACEMENT_3D('',#387755,#387756,#387757); +#387755 = CARTESIAN_POINT('',(153.04999994135,-100.3750000586,1.51)); +#387756 = DIRECTION('',(0.,0.,-1.)); +#387757 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#387758 = ADVANCED_FACE('',(#387759),#387784,.T.); +#387759 = FACE_BOUND('',#387760,.T.); +#387760 = EDGE_LOOP('',(#387761,#387762,#387770,#387778)); +#387761 = ORIENTED_EDGE('',*,*,#387739,.T.); +#387762 = ORIENTED_EDGE('',*,*,#387763,.T.); +#387763 = EDGE_CURVE('',#387731,#387764,#387766,.T.); +#387764 = VERTEX_POINT('',#387765); +#387765 = CARTESIAN_POINT('',(153.2,-100.675,1.55)); +#387766 = LINE('',#387767,#387768); +#387767 = CARTESIAN_POINT('',(153.2,-100.375,1.55)); +#387768 = VECTOR('',#387769,1.); +#387769 = DIRECTION('',(0.,-1.,0.)); +#387770 = ORIENTED_EDGE('',*,*,#387771,.F.); +#387771 = EDGE_CURVE('',#387772,#387764,#387774,.T.); +#387772 = VERTEX_POINT('',#387773); +#387773 = CARTESIAN_POINT('',(153.2,-100.675,1.51)); +#387774 = LINE('',#387775,#387776); +#387775 = CARTESIAN_POINT('',(153.2,-100.675,1.51)); +#387776 = VECTOR('',#387777,1.); +#387777 = DIRECTION('',(0.,0.,1.)); +#387778 = ORIENTED_EDGE('',*,*,#387779,.F.); +#387779 = EDGE_CURVE('',#387740,#387772,#387780,.T.); +#387780 = LINE('',#387781,#387782); +#387781 = CARTESIAN_POINT('',(153.2,-100.375,1.51)); +#387782 = VECTOR('',#387783,1.); +#387783 = DIRECTION('',(0.,-1.,0.)); +#387784 = PLANE('',#387785); +#387785 = AXIS2_PLACEMENT_3D('',#387786,#387787,#387788); +#387786 = CARTESIAN_POINT('',(153.2,-100.375,1.51)); +#387787 = DIRECTION('',(1.,0.,-0.)); +#387788 = DIRECTION('',(0.,-1.,0.)); +#387789 = ADVANCED_FACE('',(#387790),#387817,.T.); +#387790 = FACE_BOUND('',#387791,.T.); +#387791 = EDGE_LOOP('',(#387792,#387793,#387802,#387810)); +#387792 = ORIENTED_EDGE('',*,*,#387771,.T.); +#387793 = ORIENTED_EDGE('',*,*,#387794,.T.); +#387794 = EDGE_CURVE('',#387764,#387795,#387797,.T.); +#387795 = VERTEX_POINT('',#387796); +#387796 = CARTESIAN_POINT('',(153.05,-100.825,1.55)); +#387797 = CIRCLE('',#387798,0.150000058649); +#387798 = AXIS2_PLACEMENT_3D('',#387799,#387800,#387801); +#387799 = CARTESIAN_POINT('',(153.04999994135,-100.6749999413,1.55)); +#387800 = DIRECTION('',(0.,0.,-1.)); +#387801 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#387802 = ORIENTED_EDGE('',*,*,#387803,.F.); +#387803 = EDGE_CURVE('',#387804,#387795,#387806,.T.); +#387804 = VERTEX_POINT('',#387805); +#387805 = CARTESIAN_POINT('',(153.05,-100.825,1.51)); +#387806 = LINE('',#387807,#387808); +#387807 = CARTESIAN_POINT('',(153.05,-100.825,1.51)); +#387808 = VECTOR('',#387809,1.); +#387809 = DIRECTION('',(0.,0.,1.)); +#387810 = ORIENTED_EDGE('',*,*,#387811,.F.); +#387811 = EDGE_CURVE('',#387772,#387804,#387812,.T.); +#387812 = CIRCLE('',#387813,0.150000058649); +#387813 = AXIS2_PLACEMENT_3D('',#387814,#387815,#387816); +#387814 = CARTESIAN_POINT('',(153.04999994135,-100.6749999413,1.51)); +#387815 = DIRECTION('',(0.,0.,-1.)); +#387816 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#387817 = CYLINDRICAL_SURFACE('',#387818,0.150000058649); +#387818 = AXIS2_PLACEMENT_3D('',#387819,#387820,#387821); +#387819 = CARTESIAN_POINT('',(153.04999994135,-100.6749999413,1.51)); +#387820 = DIRECTION('',(0.,0.,-1.)); +#387821 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#387822 = ADVANCED_FACE('',(#387823),#387848,.T.); +#387823 = FACE_BOUND('',#387824,.T.); +#387824 = EDGE_LOOP('',(#387825,#387826,#387834,#387842)); +#387825 = ORIENTED_EDGE('',*,*,#387803,.T.); +#387826 = ORIENTED_EDGE('',*,*,#387827,.T.); +#387827 = EDGE_CURVE('',#387795,#387828,#387830,.T.); +#387828 = VERTEX_POINT('',#387829); +#387829 = CARTESIAN_POINT('',(151.55,-100.825,1.55)); +#387830 = LINE('',#387831,#387832); +#387831 = CARTESIAN_POINT('',(153.05,-100.825,1.55)); +#387832 = VECTOR('',#387833,1.); +#387833 = DIRECTION('',(-1.,0.,0.)); +#387834 = ORIENTED_EDGE('',*,*,#387835,.F.); +#387835 = EDGE_CURVE('',#387836,#387828,#387838,.T.); +#387836 = VERTEX_POINT('',#387837); +#387837 = CARTESIAN_POINT('',(151.55,-100.825,1.51)); +#387838 = LINE('',#387839,#387840); +#387839 = CARTESIAN_POINT('',(151.55,-100.825,1.51)); +#387840 = VECTOR('',#387841,1.); +#387841 = DIRECTION('',(0.,0.,1.)); +#387842 = ORIENTED_EDGE('',*,*,#387843,.F.); +#387843 = EDGE_CURVE('',#387804,#387836,#387844,.T.); +#387844 = LINE('',#387845,#387846); +#387845 = CARTESIAN_POINT('',(153.05,-100.825,1.51)); +#387846 = VECTOR('',#387847,1.); +#387847 = DIRECTION('',(-1.,0.,0.)); +#387848 = PLANE('',#387849); +#387849 = AXIS2_PLACEMENT_3D('',#387850,#387851,#387852); +#387850 = CARTESIAN_POINT('',(153.05,-100.825,1.51)); +#387851 = DIRECTION('',(0.,-1.,0.)); +#387852 = DIRECTION('',(-1.,0.,0.)); +#387853 = ADVANCED_FACE('',(#387854),#387881,.T.); +#387854 = FACE_BOUND('',#387855,.T.); +#387855 = EDGE_LOOP('',(#387856,#387857,#387866,#387874)); +#387856 = ORIENTED_EDGE('',*,*,#387835,.T.); +#387857 = ORIENTED_EDGE('',*,*,#387858,.T.); +#387858 = EDGE_CURVE('',#387828,#387859,#387861,.T.); +#387859 = VERTEX_POINT('',#387860); +#387860 = CARTESIAN_POINT('',(151.4,-100.675,1.55)); +#387861 = CIRCLE('',#387862,0.150000058649); +#387862 = AXIS2_PLACEMENT_3D('',#387863,#387864,#387865); +#387863 = CARTESIAN_POINT('',(151.55000005864,-100.6749999413,1.55)); +#387864 = DIRECTION('',(0.,0.,-1.)); +#387865 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#387866 = ORIENTED_EDGE('',*,*,#387867,.F.); +#387867 = EDGE_CURVE('',#387868,#387859,#387870,.T.); +#387868 = VERTEX_POINT('',#387869); +#387869 = CARTESIAN_POINT('',(151.4,-100.675,1.51)); +#387870 = LINE('',#387871,#387872); +#387871 = CARTESIAN_POINT('',(151.4,-100.675,1.51)); +#387872 = VECTOR('',#387873,1.); +#387873 = DIRECTION('',(0.,0.,1.)); +#387874 = ORIENTED_EDGE('',*,*,#387875,.F.); +#387875 = EDGE_CURVE('',#387836,#387868,#387876,.T.); +#387876 = CIRCLE('',#387877,0.150000058649); +#387877 = AXIS2_PLACEMENT_3D('',#387878,#387879,#387880); +#387878 = CARTESIAN_POINT('',(151.55000005864,-100.6749999413,1.51)); +#387879 = DIRECTION('',(0.,0.,-1.)); +#387880 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#387881 = CYLINDRICAL_SURFACE('',#387882,0.150000058649); +#387882 = AXIS2_PLACEMENT_3D('',#387883,#387884,#387885); +#387883 = CARTESIAN_POINT('',(151.55000005864,-100.6749999413,1.51)); +#387884 = DIRECTION('',(0.,0.,-1.)); +#387885 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#387886 = ADVANCED_FACE('',(#387887),#387903,.T.); +#387887 = FACE_BOUND('',#387888,.T.); +#387888 = EDGE_LOOP('',(#387889,#387890,#387896,#387897)); +#387889 = ORIENTED_EDGE('',*,*,#387867,.T.); +#387890 = ORIENTED_EDGE('',*,*,#387891,.T.); +#387891 = EDGE_CURVE('',#387859,#387659,#387892,.T.); +#387892 = LINE('',#387893,#387894); +#387893 = CARTESIAN_POINT('',(151.4,-100.675,1.55)); +#387894 = VECTOR('',#387895,1.); +#387895 = DIRECTION('',(0.,1.,0.)); +#387896 = ORIENTED_EDGE('',*,*,#387656,.F.); +#387897 = ORIENTED_EDGE('',*,*,#387898,.F.); +#387898 = EDGE_CURVE('',#387868,#387657,#387899,.T.); +#387899 = LINE('',#387900,#387901); +#387900 = CARTESIAN_POINT('',(151.4,-100.675,1.51)); +#387901 = VECTOR('',#387902,1.); +#387902 = DIRECTION('',(0.,1.,0.)); +#387903 = PLANE('',#387904); +#387904 = AXIS2_PLACEMENT_3D('',#387905,#387906,#387907); +#387905 = CARTESIAN_POINT('',(151.4,-100.675,1.51)); +#387906 = DIRECTION('',(-1.,0.,0.)); +#387907 = DIRECTION('',(0.,1.,0.)); +#387908 = ADVANCED_FACE('',(#387909),#387919,.F.); +#387909 = FACE_BOUND('',#387910,.T.); +#387910 = EDGE_LOOP('',(#387911,#387912,#387913,#387914,#387915,#387916, + #387917,#387918)); +#387911 = ORIENTED_EDGE('',*,*,#387683,.T.); +#387912 = ORIENTED_EDGE('',*,*,#387715,.T.); +#387913 = ORIENTED_EDGE('',*,*,#387747,.T.); +#387914 = ORIENTED_EDGE('',*,*,#387779,.T.); +#387915 = ORIENTED_EDGE('',*,*,#387811,.T.); +#387916 = ORIENTED_EDGE('',*,*,#387843,.T.); +#387917 = ORIENTED_EDGE('',*,*,#387875,.T.); +#387918 = ORIENTED_EDGE('',*,*,#387898,.T.); +#387919 = PLANE('',#387920); +#387920 = AXIS2_PLACEMENT_3D('',#387921,#387922,#387923); +#387921 = CARTESIAN_POINT('',(0.,0.,1.51)); +#387922 = DIRECTION('',(0.,0.,1.)); +#387923 = DIRECTION('',(1.,0.,-0.)); +#387924 = ADVANCED_FACE('',(#387925),#387935,.T.); +#387925 = FACE_BOUND('',#387926,.F.); +#387926 = EDGE_LOOP('',(#387927,#387928,#387929,#387930,#387931,#387932, + #387933,#387934)); +#387927 = ORIENTED_EDGE('',*,*,#387666,.T.); +#387928 = ORIENTED_EDGE('',*,*,#387699,.T.); +#387929 = ORIENTED_EDGE('',*,*,#387730,.T.); +#387930 = ORIENTED_EDGE('',*,*,#387763,.T.); +#387931 = ORIENTED_EDGE('',*,*,#387794,.T.); +#387932 = ORIENTED_EDGE('',*,*,#387827,.T.); +#387933 = ORIENTED_EDGE('',*,*,#387858,.T.); +#387934 = ORIENTED_EDGE('',*,*,#387891,.T.); +#387935 = PLANE('',#387936); +#387936 = AXIS2_PLACEMENT_3D('',#387937,#387938,#387939); +#387937 = CARTESIAN_POINT('',(0.,0.,1.55)); +#387938 = DIRECTION('',(0.,0.,1.)); +#387939 = DIRECTION('',(1.,0.,-0.)); +#387940 = MANIFOLD_SOLID_BREP('',#387941); +#387941 = CLOSED_SHELL('',(#387942,#387984,#388015,#388048,#388079, + #388112,#388143,#388176,#388198,#388214)); +#387942 = ADVANCED_FACE('',(#387943),#387979,.T.); +#387943 = FACE_BOUND('',#387944,.T.); +#387944 = EDGE_LOOP('',(#387945,#387955,#387964,#387972)); +#387945 = ORIENTED_EDGE('',*,*,#387946,.T.); +#387946 = EDGE_CURVE('',#387947,#387949,#387951,.T.); +#387947 = VERTEX_POINT('',#387948); +#387948 = CARTESIAN_POINT('',(129.25,-120.75,1.51)); +#387949 = VERTEX_POINT('',#387950); +#387950 = CARTESIAN_POINT('',(129.25,-120.75,1.55)); +#387951 = LINE('',#387952,#387953); +#387952 = CARTESIAN_POINT('',(129.25,-120.75,1.51)); +#387953 = VECTOR('',#387954,1.); +#387954 = DIRECTION('',(0.,0.,1.)); +#387955 = ORIENTED_EDGE('',*,*,#387956,.T.); +#387956 = EDGE_CURVE('',#387949,#387957,#387959,.T.); +#387957 = VERTEX_POINT('',#387958); +#387958 = CARTESIAN_POINT('',(129.75,-120.25,1.55)); +#387959 = CIRCLE('',#387960,0.500001333575); +#387960 = AXIS2_PLACEMENT_3D('',#387961,#387962,#387963); +#387961 = CARTESIAN_POINT('',(129.75000133357,-120.7500013335,1.55)); +#387962 = DIRECTION('',(0.,0.,-1.)); +#387963 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#387964 = ORIENTED_EDGE('',*,*,#387965,.F.); +#387965 = EDGE_CURVE('',#387966,#387957,#387968,.T.); +#387966 = VERTEX_POINT('',#387967); +#387967 = CARTESIAN_POINT('',(129.75,-120.25,1.51)); +#387968 = LINE('',#387969,#387970); +#387969 = CARTESIAN_POINT('',(129.75,-120.25,1.51)); +#387970 = VECTOR('',#387971,1.); +#387971 = DIRECTION('',(0.,0.,1.)); +#387972 = ORIENTED_EDGE('',*,*,#387973,.F.); +#387973 = EDGE_CURVE('',#387947,#387966,#387974,.T.); +#387974 = CIRCLE('',#387975,0.500001333575); +#387975 = AXIS2_PLACEMENT_3D('',#387976,#387977,#387978); +#387976 = CARTESIAN_POINT('',(129.75000133357,-120.7500013335,1.51)); +#387977 = DIRECTION('',(0.,0.,-1.)); +#387978 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#387979 = CYLINDRICAL_SURFACE('',#387980,0.500001333575); +#387980 = AXIS2_PLACEMENT_3D('',#387981,#387982,#387983); +#387981 = CARTESIAN_POINT('',(129.75000133357,-120.7500013335,1.51)); +#387982 = DIRECTION('',(0.,0.,-1.)); +#387983 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#387984 = ADVANCED_FACE('',(#387985),#388010,.T.); +#387985 = FACE_BOUND('',#387986,.T.); +#387986 = EDGE_LOOP('',(#387987,#387988,#387996,#388004)); +#387987 = ORIENTED_EDGE('',*,*,#387965,.T.); +#387988 = ORIENTED_EDGE('',*,*,#387989,.T.); +#387989 = EDGE_CURVE('',#387957,#387990,#387992,.T.); +#387990 = VERTEX_POINT('',#387991); +#387991 = CARTESIAN_POINT('',(130.75,-120.25,1.55)); +#387992 = LINE('',#387993,#387994); +#387993 = CARTESIAN_POINT('',(129.75,-120.25,1.55)); +#387994 = VECTOR('',#387995,1.); +#387995 = DIRECTION('',(1.,0.,0.)); +#387996 = ORIENTED_EDGE('',*,*,#387997,.F.); +#387997 = EDGE_CURVE('',#387998,#387990,#388000,.T.); +#387998 = VERTEX_POINT('',#387999); +#387999 = CARTESIAN_POINT('',(130.75,-120.25,1.51)); +#388000 = LINE('',#388001,#388002); +#388001 = CARTESIAN_POINT('',(130.75,-120.25,1.51)); +#388002 = VECTOR('',#388003,1.); +#388003 = DIRECTION('',(0.,0.,1.)); +#388004 = ORIENTED_EDGE('',*,*,#388005,.F.); +#388005 = EDGE_CURVE('',#387966,#387998,#388006,.T.); +#388006 = LINE('',#388007,#388008); +#388007 = CARTESIAN_POINT('',(129.75,-120.25,1.51)); +#388008 = VECTOR('',#388009,1.); +#388009 = DIRECTION('',(1.,0.,0.)); +#388010 = PLANE('',#388011); +#388011 = AXIS2_PLACEMENT_3D('',#388012,#388013,#388014); +#388012 = CARTESIAN_POINT('',(129.75,-120.25,1.51)); +#388013 = DIRECTION('',(0.,1.,0.)); +#388014 = DIRECTION('',(1.,0.,0.)); +#388015 = ADVANCED_FACE('',(#388016),#388043,.T.); +#388016 = FACE_BOUND('',#388017,.T.); +#388017 = EDGE_LOOP('',(#388018,#388019,#388028,#388036)); +#388018 = ORIENTED_EDGE('',*,*,#387997,.T.); +#388019 = ORIENTED_EDGE('',*,*,#388020,.T.); +#388020 = EDGE_CURVE('',#387990,#388021,#388023,.T.); +#388021 = VERTEX_POINT('',#388022); +#388022 = CARTESIAN_POINT('',(131.25,-120.75,1.55)); +#388023 = CIRCLE('',#388024,0.500001333575); +#388024 = AXIS2_PLACEMENT_3D('',#388025,#388026,#388027); +#388025 = CARTESIAN_POINT('',(130.74999866642,-120.7500013335,1.55)); +#388026 = DIRECTION('',(0.,0.,-1.)); +#388027 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#388028 = ORIENTED_EDGE('',*,*,#388029,.F.); +#388029 = EDGE_CURVE('',#388030,#388021,#388032,.T.); +#388030 = VERTEX_POINT('',#388031); +#388031 = CARTESIAN_POINT('',(131.25,-120.75,1.51)); +#388032 = LINE('',#388033,#388034); +#388033 = CARTESIAN_POINT('',(131.25,-120.75,1.51)); +#388034 = VECTOR('',#388035,1.); +#388035 = DIRECTION('',(0.,0.,1.)); +#388036 = ORIENTED_EDGE('',*,*,#388037,.F.); +#388037 = EDGE_CURVE('',#387998,#388030,#388038,.T.); +#388038 = CIRCLE('',#388039,0.500001333575); +#388039 = AXIS2_PLACEMENT_3D('',#388040,#388041,#388042); +#388040 = CARTESIAN_POINT('',(130.74999866642,-120.7500013335,1.51)); +#388041 = DIRECTION('',(0.,0.,-1.)); +#388042 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#388043 = CYLINDRICAL_SURFACE('',#388044,0.500001333575); +#388044 = AXIS2_PLACEMENT_3D('',#388045,#388046,#388047); +#388045 = CARTESIAN_POINT('',(130.74999866642,-120.7500013335,1.51)); +#388046 = DIRECTION('',(0.,0.,-1.)); +#388047 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#388048 = ADVANCED_FACE('',(#388049),#388074,.T.); +#388049 = FACE_BOUND('',#388050,.T.); +#388050 = EDGE_LOOP('',(#388051,#388052,#388060,#388068)); +#388051 = ORIENTED_EDGE('',*,*,#388029,.T.); +#388052 = ORIENTED_EDGE('',*,*,#388053,.T.); +#388053 = EDGE_CURVE('',#388021,#388054,#388056,.T.); +#388054 = VERTEX_POINT('',#388055); +#388055 = CARTESIAN_POINT('',(131.25,-121.75,1.55)); +#388056 = LINE('',#388057,#388058); +#388057 = CARTESIAN_POINT('',(131.25,-120.75,1.55)); +#388058 = VECTOR('',#388059,1.); +#388059 = DIRECTION('',(0.,-1.,0.)); +#388060 = ORIENTED_EDGE('',*,*,#388061,.F.); +#388061 = EDGE_CURVE('',#388062,#388054,#388064,.T.); +#388062 = VERTEX_POINT('',#388063); +#388063 = CARTESIAN_POINT('',(131.25,-121.75,1.51)); +#388064 = LINE('',#388065,#388066); +#388065 = CARTESIAN_POINT('',(131.25,-121.75,1.51)); +#388066 = VECTOR('',#388067,1.); +#388067 = DIRECTION('',(0.,0.,1.)); +#388068 = ORIENTED_EDGE('',*,*,#388069,.F.); +#388069 = EDGE_CURVE('',#388030,#388062,#388070,.T.); +#388070 = LINE('',#388071,#388072); +#388071 = CARTESIAN_POINT('',(131.25,-120.75,1.51)); +#388072 = VECTOR('',#388073,1.); +#388073 = DIRECTION('',(0.,-1.,0.)); +#388074 = PLANE('',#388075); +#388075 = AXIS2_PLACEMENT_3D('',#388076,#388077,#388078); +#388076 = CARTESIAN_POINT('',(131.25,-120.75,1.51)); +#388077 = DIRECTION('',(1.,0.,-0.)); +#388078 = DIRECTION('',(0.,-1.,0.)); +#388079 = ADVANCED_FACE('',(#388080),#388107,.T.); +#388080 = FACE_BOUND('',#388081,.T.); +#388081 = EDGE_LOOP('',(#388082,#388083,#388092,#388100)); +#388082 = ORIENTED_EDGE('',*,*,#388061,.T.); +#388083 = ORIENTED_EDGE('',*,*,#388084,.T.); +#388084 = EDGE_CURVE('',#388054,#388085,#388087,.T.); +#388085 = VERTEX_POINT('',#388086); +#388086 = CARTESIAN_POINT('',(130.75,-122.25,1.55)); +#388087 = CIRCLE('',#388088,0.500001333575); +#388088 = AXIS2_PLACEMENT_3D('',#388089,#388090,#388091); +#388089 = CARTESIAN_POINT('',(130.74999866642,-121.7499986664,1.55)); +#388090 = DIRECTION('',(0.,0.,-1.)); +#388091 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#388092 = ORIENTED_EDGE('',*,*,#388093,.F.); +#388093 = EDGE_CURVE('',#388094,#388085,#388096,.T.); +#388094 = VERTEX_POINT('',#388095); +#388095 = CARTESIAN_POINT('',(130.75,-122.25,1.51)); +#388096 = LINE('',#388097,#388098); +#388097 = CARTESIAN_POINT('',(130.75,-122.25,1.51)); +#388098 = VECTOR('',#388099,1.); +#388099 = DIRECTION('',(0.,0.,1.)); +#388100 = ORIENTED_EDGE('',*,*,#388101,.F.); +#388101 = EDGE_CURVE('',#388062,#388094,#388102,.T.); +#388102 = CIRCLE('',#388103,0.500001333575); +#388103 = AXIS2_PLACEMENT_3D('',#388104,#388105,#388106); +#388104 = CARTESIAN_POINT('',(130.74999866642,-121.7499986664,1.51)); +#388105 = DIRECTION('',(0.,0.,-1.)); +#388106 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#388107 = CYLINDRICAL_SURFACE('',#388108,0.500001333575); +#388108 = AXIS2_PLACEMENT_3D('',#388109,#388110,#388111); +#388109 = CARTESIAN_POINT('',(130.74999866642,-121.7499986664,1.51)); +#388110 = DIRECTION('',(0.,0.,-1.)); +#388111 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#388112 = ADVANCED_FACE('',(#388113),#388138,.T.); +#388113 = FACE_BOUND('',#388114,.T.); +#388114 = EDGE_LOOP('',(#388115,#388116,#388124,#388132)); +#388115 = ORIENTED_EDGE('',*,*,#388093,.T.); +#388116 = ORIENTED_EDGE('',*,*,#388117,.T.); +#388117 = EDGE_CURVE('',#388085,#388118,#388120,.T.); +#388118 = VERTEX_POINT('',#388119); +#388119 = CARTESIAN_POINT('',(129.75,-122.25,1.55)); +#388120 = LINE('',#388121,#388122); +#388121 = CARTESIAN_POINT('',(130.75,-122.25,1.55)); +#388122 = VECTOR('',#388123,1.); +#388123 = DIRECTION('',(-1.,0.,0.)); +#388124 = ORIENTED_EDGE('',*,*,#388125,.F.); +#388125 = EDGE_CURVE('',#388126,#388118,#388128,.T.); +#388126 = VERTEX_POINT('',#388127); +#388127 = CARTESIAN_POINT('',(129.75,-122.25,1.51)); +#388128 = LINE('',#388129,#388130); +#388129 = CARTESIAN_POINT('',(129.75,-122.25,1.51)); +#388130 = VECTOR('',#388131,1.); +#388131 = DIRECTION('',(0.,0.,1.)); +#388132 = ORIENTED_EDGE('',*,*,#388133,.F.); +#388133 = EDGE_CURVE('',#388094,#388126,#388134,.T.); +#388134 = LINE('',#388135,#388136); +#388135 = CARTESIAN_POINT('',(130.75,-122.25,1.51)); +#388136 = VECTOR('',#388137,1.); +#388137 = DIRECTION('',(-1.,0.,0.)); +#388138 = PLANE('',#388139); +#388139 = AXIS2_PLACEMENT_3D('',#388140,#388141,#388142); +#388140 = CARTESIAN_POINT('',(130.75,-122.25,1.51)); +#388141 = DIRECTION('',(0.,-1.,0.)); +#388142 = DIRECTION('',(-1.,0.,0.)); +#388143 = ADVANCED_FACE('',(#388144),#388171,.T.); +#388144 = FACE_BOUND('',#388145,.T.); +#388145 = EDGE_LOOP('',(#388146,#388147,#388156,#388164)); +#388146 = ORIENTED_EDGE('',*,*,#388125,.T.); +#388147 = ORIENTED_EDGE('',*,*,#388148,.T.); +#388148 = EDGE_CURVE('',#388118,#388149,#388151,.T.); +#388149 = VERTEX_POINT('',#388150); +#388150 = CARTESIAN_POINT('',(129.25,-121.75,1.55)); +#388151 = CIRCLE('',#388152,0.500001333575); +#388152 = AXIS2_PLACEMENT_3D('',#388153,#388154,#388155); +#388153 = CARTESIAN_POINT('',(129.75000133357,-121.7499986664,1.55)); +#388154 = DIRECTION('',(0.,0.,-1.)); +#388155 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#388156 = ORIENTED_EDGE('',*,*,#388157,.F.); +#388157 = EDGE_CURVE('',#388158,#388149,#388160,.T.); +#388158 = VERTEX_POINT('',#388159); +#388159 = CARTESIAN_POINT('',(129.25,-121.75,1.51)); +#388160 = LINE('',#388161,#388162); +#388161 = CARTESIAN_POINT('',(129.25,-121.75,1.51)); +#388162 = VECTOR('',#388163,1.); +#388163 = DIRECTION('',(0.,0.,1.)); +#388164 = ORIENTED_EDGE('',*,*,#388165,.F.); +#388165 = EDGE_CURVE('',#388126,#388158,#388166,.T.); +#388166 = CIRCLE('',#388167,0.500001333575); +#388167 = AXIS2_PLACEMENT_3D('',#388168,#388169,#388170); +#388168 = CARTESIAN_POINT('',(129.75000133357,-121.7499986664,1.51)); +#388169 = DIRECTION('',(0.,0.,-1.)); +#388170 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#388171 = CYLINDRICAL_SURFACE('',#388172,0.500001333575); +#388172 = AXIS2_PLACEMENT_3D('',#388173,#388174,#388175); +#388173 = CARTESIAN_POINT('',(129.75000133357,-121.7499986664,1.51)); +#388174 = DIRECTION('',(0.,0.,-1.)); +#388175 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#388176 = ADVANCED_FACE('',(#388177),#388193,.T.); +#388177 = FACE_BOUND('',#388178,.T.); +#388178 = EDGE_LOOP('',(#388179,#388180,#388186,#388187)); +#388179 = ORIENTED_EDGE('',*,*,#388157,.T.); +#388180 = ORIENTED_EDGE('',*,*,#388181,.T.); +#388181 = EDGE_CURVE('',#388149,#387949,#388182,.T.); +#388182 = LINE('',#388183,#388184); +#388183 = CARTESIAN_POINT('',(129.25,-121.75,1.55)); +#388184 = VECTOR('',#388185,1.); +#388185 = DIRECTION('',(0.,1.,0.)); +#388186 = ORIENTED_EDGE('',*,*,#387946,.F.); +#388187 = ORIENTED_EDGE('',*,*,#388188,.F.); +#388188 = EDGE_CURVE('',#388158,#387947,#388189,.T.); +#388189 = LINE('',#388190,#388191); +#388190 = CARTESIAN_POINT('',(129.25,-121.75,1.51)); +#388191 = VECTOR('',#388192,1.); +#388192 = DIRECTION('',(0.,1.,0.)); +#388193 = PLANE('',#388194); +#388194 = AXIS2_PLACEMENT_3D('',#388195,#388196,#388197); +#388195 = CARTESIAN_POINT('',(129.25,-121.75,1.51)); +#388196 = DIRECTION('',(-1.,0.,0.)); +#388197 = DIRECTION('',(0.,1.,0.)); +#388198 = ADVANCED_FACE('',(#388199),#388209,.F.); +#388199 = FACE_BOUND('',#388200,.T.); +#388200 = EDGE_LOOP('',(#388201,#388202,#388203,#388204,#388205,#388206, + #388207,#388208)); +#388201 = ORIENTED_EDGE('',*,*,#387973,.T.); +#388202 = ORIENTED_EDGE('',*,*,#388005,.T.); +#388203 = ORIENTED_EDGE('',*,*,#388037,.T.); +#388204 = ORIENTED_EDGE('',*,*,#388069,.T.); +#388205 = ORIENTED_EDGE('',*,*,#388101,.T.); +#388206 = ORIENTED_EDGE('',*,*,#388133,.T.); +#388207 = ORIENTED_EDGE('',*,*,#388165,.T.); +#388208 = ORIENTED_EDGE('',*,*,#388188,.T.); +#388209 = PLANE('',#388210); +#388210 = AXIS2_PLACEMENT_3D('',#388211,#388212,#388213); +#388211 = CARTESIAN_POINT('',(0.,0.,1.51)); +#388212 = DIRECTION('',(0.,0.,1.)); +#388213 = DIRECTION('',(1.,0.,-0.)); +#388214 = ADVANCED_FACE('',(#388215),#388225,.T.); +#388215 = FACE_BOUND('',#388216,.F.); +#388216 = EDGE_LOOP('',(#388217,#388218,#388219,#388220,#388221,#388222, + #388223,#388224)); +#388217 = ORIENTED_EDGE('',*,*,#387956,.T.); +#388218 = ORIENTED_EDGE('',*,*,#387989,.T.); +#388219 = ORIENTED_EDGE('',*,*,#388020,.T.); +#388220 = ORIENTED_EDGE('',*,*,#388053,.T.); +#388221 = ORIENTED_EDGE('',*,*,#388084,.T.); +#388222 = ORIENTED_EDGE('',*,*,#388117,.T.); +#388223 = ORIENTED_EDGE('',*,*,#388148,.T.); +#388224 = ORIENTED_EDGE('',*,*,#388181,.T.); +#388225 = PLANE('',#388226); +#388226 = AXIS2_PLACEMENT_3D('',#388227,#388228,#388229); +#388227 = CARTESIAN_POINT('',(0.,0.,1.55)); +#388228 = DIRECTION('',(0.,0.,1.)); +#388229 = DIRECTION('',(1.,0.,-0.)); +#388230 = MANIFOLD_SOLID_BREP('',#388231); +#388231 = CLOSED_SHELL('',(#388232,#388274,#388305,#388338,#388369, + #388402,#388433,#388466,#388488,#388504)); +#388232 = ADVANCED_FACE('',(#388233),#388269,.T.); +#388233 = FACE_BOUND('',#388234,.T.); +#388234 = EDGE_LOOP('',(#388235,#388245,#388254,#388262)); +#388235 = ORIENTED_EDGE('',*,*,#388236,.T.); +#388236 = EDGE_CURVE('',#388237,#388239,#388241,.T.); +#388237 = VERTEX_POINT('',#388238); +#388238 = CARTESIAN_POINT('',(133.95,-152.48,1.51)); +#388239 = VERTEX_POINT('',#388240); +#388240 = CARTESIAN_POINT('',(133.95,-152.48,1.55)); +#388241 = LINE('',#388242,#388243); +#388242 = CARTESIAN_POINT('',(133.95,-152.48,1.51)); +#388243 = VECTOR('',#388244,1.); +#388244 = DIRECTION('',(0.,0.,1.)); +#388245 = ORIENTED_EDGE('',*,*,#388246,.T.); +#388246 = EDGE_CURVE('',#388239,#388247,#388249,.T.); +#388247 = VERTEX_POINT('',#388248); +#388248 = CARTESIAN_POINT('',(134.1,-152.33,1.55)); +#388249 = CIRCLE('',#388250,0.150000058649); +#388250 = AXIS2_PLACEMENT_3D('',#388251,#388252,#388253); +#388251 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.55)); +#388252 = DIRECTION('',(0.,0.,-1.)); +#388253 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388254 = ORIENTED_EDGE('',*,*,#388255,.F.); +#388255 = EDGE_CURVE('',#388256,#388247,#388258,.T.); +#388256 = VERTEX_POINT('',#388257); +#388257 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#388258 = LINE('',#388259,#388260); +#388259 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#388260 = VECTOR('',#388261,1.); +#388261 = DIRECTION('',(0.,0.,1.)); +#388262 = ORIENTED_EDGE('',*,*,#388263,.F.); +#388263 = EDGE_CURVE('',#388237,#388256,#388264,.T.); +#388264 = CIRCLE('',#388265,0.150000058649); +#388265 = AXIS2_PLACEMENT_3D('',#388266,#388267,#388268); +#388266 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.51)); +#388267 = DIRECTION('',(0.,0.,-1.)); +#388268 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388269 = CYLINDRICAL_SURFACE('',#388270,0.150000058649); +#388270 = AXIS2_PLACEMENT_3D('',#388271,#388272,#388273); +#388271 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.51)); +#388272 = DIRECTION('',(0.,0.,-1.)); +#388273 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388274 = ADVANCED_FACE('',(#388275),#388300,.T.); +#388275 = FACE_BOUND('',#388276,.T.); +#388276 = EDGE_LOOP('',(#388277,#388278,#388286,#388294)); +#388277 = ORIENTED_EDGE('',*,*,#388255,.T.); +#388278 = ORIENTED_EDGE('',*,*,#388279,.T.); +#388279 = EDGE_CURVE('',#388247,#388280,#388282,.T.); +#388280 = VERTEX_POINT('',#388281); +#388281 = CARTESIAN_POINT('',(134.4,-152.33,1.55)); +#388282 = LINE('',#388283,#388284); +#388283 = CARTESIAN_POINT('',(134.1,-152.33,1.55)); +#388284 = VECTOR('',#388285,1.); +#388285 = DIRECTION('',(1.,0.,0.)); +#388286 = ORIENTED_EDGE('',*,*,#388287,.F.); +#388287 = EDGE_CURVE('',#388288,#388280,#388290,.T.); +#388288 = VERTEX_POINT('',#388289); +#388289 = CARTESIAN_POINT('',(134.4,-152.33,1.51)); +#388290 = LINE('',#388291,#388292); +#388291 = CARTESIAN_POINT('',(134.4,-152.33,1.51)); +#388292 = VECTOR('',#388293,1.); +#388293 = DIRECTION('',(0.,0.,1.)); +#388294 = ORIENTED_EDGE('',*,*,#388295,.F.); +#388295 = EDGE_CURVE('',#388256,#388288,#388296,.T.); +#388296 = LINE('',#388297,#388298); +#388297 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#388298 = VECTOR('',#388299,1.); +#388299 = DIRECTION('',(1.,0.,0.)); +#388300 = PLANE('',#388301); +#388301 = AXIS2_PLACEMENT_3D('',#388302,#388303,#388304); +#388302 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#388303 = DIRECTION('',(0.,1.,0.)); +#388304 = DIRECTION('',(1.,0.,0.)); +#388305 = ADVANCED_FACE('',(#388306),#388333,.T.); +#388306 = FACE_BOUND('',#388307,.T.); +#388307 = EDGE_LOOP('',(#388308,#388309,#388318,#388326)); +#388308 = ORIENTED_EDGE('',*,*,#388287,.T.); +#388309 = ORIENTED_EDGE('',*,*,#388310,.T.); +#388310 = EDGE_CURVE('',#388280,#388311,#388313,.T.); +#388311 = VERTEX_POINT('',#388312); +#388312 = CARTESIAN_POINT('',(134.55,-152.48,1.55)); +#388313 = CIRCLE('',#388314,0.150000058649); +#388314 = AXIS2_PLACEMENT_3D('',#388315,#388316,#388317); +#388315 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.55)); +#388316 = DIRECTION('',(0.,0.,-1.)); +#388317 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388318 = ORIENTED_EDGE('',*,*,#388319,.F.); +#388319 = EDGE_CURVE('',#388320,#388311,#388322,.T.); +#388320 = VERTEX_POINT('',#388321); +#388321 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#388322 = LINE('',#388323,#388324); +#388323 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#388324 = VECTOR('',#388325,1.); +#388325 = DIRECTION('',(0.,0.,1.)); +#388326 = ORIENTED_EDGE('',*,*,#388327,.F.); +#388327 = EDGE_CURVE('',#388288,#388320,#388328,.T.); +#388328 = CIRCLE('',#388329,0.150000058649); +#388329 = AXIS2_PLACEMENT_3D('',#388330,#388331,#388332); +#388330 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.51)); +#388331 = DIRECTION('',(0.,0.,-1.)); +#388332 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388333 = CYLINDRICAL_SURFACE('',#388334,0.150000058649); +#388334 = AXIS2_PLACEMENT_3D('',#388335,#388336,#388337); +#388335 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.51)); +#388336 = DIRECTION('',(0.,0.,-1.)); +#388337 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388338 = ADVANCED_FACE('',(#388339),#388364,.T.); +#388339 = FACE_BOUND('',#388340,.T.); +#388340 = EDGE_LOOP('',(#388341,#388342,#388350,#388358)); +#388341 = ORIENTED_EDGE('',*,*,#388319,.T.); +#388342 = ORIENTED_EDGE('',*,*,#388343,.T.); +#388343 = EDGE_CURVE('',#388311,#388344,#388346,.T.); +#388344 = VERTEX_POINT('',#388345); +#388345 = CARTESIAN_POINT('',(134.55,-153.63,1.55)); +#388346 = LINE('',#388347,#388348); +#388347 = CARTESIAN_POINT('',(134.55,-152.48,1.55)); +#388348 = VECTOR('',#388349,1.); +#388349 = DIRECTION('',(0.,-1.,0.)); +#388350 = ORIENTED_EDGE('',*,*,#388351,.F.); +#388351 = EDGE_CURVE('',#388352,#388344,#388354,.T.); +#388352 = VERTEX_POINT('',#388353); +#388353 = CARTESIAN_POINT('',(134.55,-153.63,1.51)); +#388354 = LINE('',#388355,#388356); +#388355 = CARTESIAN_POINT('',(134.55,-153.63,1.51)); +#388356 = VECTOR('',#388357,1.); +#388357 = DIRECTION('',(0.,0.,1.)); +#388358 = ORIENTED_EDGE('',*,*,#388359,.F.); +#388359 = EDGE_CURVE('',#388320,#388352,#388360,.T.); +#388360 = LINE('',#388361,#388362); +#388361 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#388362 = VECTOR('',#388363,1.); +#388363 = DIRECTION('',(0.,-1.,0.)); +#388364 = PLANE('',#388365); +#388365 = AXIS2_PLACEMENT_3D('',#388366,#388367,#388368); +#388366 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#388367 = DIRECTION('',(1.,0.,-0.)); +#388368 = DIRECTION('',(0.,-1.,0.)); +#388369 = ADVANCED_FACE('',(#388370),#388397,.T.); +#388370 = FACE_BOUND('',#388371,.T.); +#388371 = EDGE_LOOP('',(#388372,#388373,#388382,#388390)); +#388372 = ORIENTED_EDGE('',*,*,#388351,.T.); +#388373 = ORIENTED_EDGE('',*,*,#388374,.T.); +#388374 = EDGE_CURVE('',#388344,#388375,#388377,.T.); +#388375 = VERTEX_POINT('',#388376); +#388376 = CARTESIAN_POINT('',(134.4,-153.78,1.55)); +#388377 = CIRCLE('',#388378,0.150000058649); +#388378 = AXIS2_PLACEMENT_3D('',#388379,#388380,#388381); +#388379 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.55)); +#388380 = DIRECTION('',(0.,0.,-1.)); +#388381 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388382 = ORIENTED_EDGE('',*,*,#388383,.F.); +#388383 = EDGE_CURVE('',#388384,#388375,#388386,.T.); +#388384 = VERTEX_POINT('',#388385); +#388385 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#388386 = LINE('',#388387,#388388); +#388387 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#388388 = VECTOR('',#388389,1.); +#388389 = DIRECTION('',(0.,0.,1.)); +#388390 = ORIENTED_EDGE('',*,*,#388391,.F.); +#388391 = EDGE_CURVE('',#388352,#388384,#388392,.T.); +#388392 = CIRCLE('',#388393,0.150000058649); +#388393 = AXIS2_PLACEMENT_3D('',#388394,#388395,#388396); +#388394 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.51)); +#388395 = DIRECTION('',(0.,0.,-1.)); +#388396 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388397 = CYLINDRICAL_SURFACE('',#388398,0.150000058649); +#388398 = AXIS2_PLACEMENT_3D('',#388399,#388400,#388401); +#388399 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.51)); +#388400 = DIRECTION('',(0.,0.,-1.)); +#388401 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388402 = ADVANCED_FACE('',(#388403),#388428,.T.); +#388403 = FACE_BOUND('',#388404,.T.); +#388404 = EDGE_LOOP('',(#388405,#388406,#388414,#388422)); +#388405 = ORIENTED_EDGE('',*,*,#388383,.T.); +#388406 = ORIENTED_EDGE('',*,*,#388407,.T.); +#388407 = EDGE_CURVE('',#388375,#388408,#388410,.T.); +#388408 = VERTEX_POINT('',#388409); +#388409 = CARTESIAN_POINT('',(134.1,-153.78,1.55)); +#388410 = LINE('',#388411,#388412); +#388411 = CARTESIAN_POINT('',(134.4,-153.78,1.55)); +#388412 = VECTOR('',#388413,1.); +#388413 = DIRECTION('',(-1.,0.,0.)); +#388414 = ORIENTED_EDGE('',*,*,#388415,.F.); +#388415 = EDGE_CURVE('',#388416,#388408,#388418,.T.); +#388416 = VERTEX_POINT('',#388417); +#388417 = CARTESIAN_POINT('',(134.1,-153.78,1.51)); +#388418 = LINE('',#388419,#388420); +#388419 = CARTESIAN_POINT('',(134.1,-153.78,1.51)); +#388420 = VECTOR('',#388421,1.); +#388421 = DIRECTION('',(0.,0.,1.)); +#388422 = ORIENTED_EDGE('',*,*,#388423,.F.); +#388423 = EDGE_CURVE('',#388384,#388416,#388424,.T.); +#388424 = LINE('',#388425,#388426); +#388425 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#388426 = VECTOR('',#388427,1.); +#388427 = DIRECTION('',(-1.,0.,0.)); +#388428 = PLANE('',#388429); +#388429 = AXIS2_PLACEMENT_3D('',#388430,#388431,#388432); +#388430 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#388431 = DIRECTION('',(0.,-1.,0.)); +#388432 = DIRECTION('',(-1.,0.,0.)); +#388433 = ADVANCED_FACE('',(#388434),#388461,.T.); +#388434 = FACE_BOUND('',#388435,.T.); +#388435 = EDGE_LOOP('',(#388436,#388437,#388446,#388454)); +#388436 = ORIENTED_EDGE('',*,*,#388415,.T.); +#388437 = ORIENTED_EDGE('',*,*,#388438,.T.); +#388438 = EDGE_CURVE('',#388408,#388439,#388441,.T.); +#388439 = VERTEX_POINT('',#388440); +#388440 = CARTESIAN_POINT('',(133.95,-153.63,1.55)); +#388441 = CIRCLE('',#388442,0.150000058649); +#388442 = AXIS2_PLACEMENT_3D('',#388443,#388444,#388445); +#388443 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.55)); +#388444 = DIRECTION('',(0.,0.,-1.)); +#388445 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388446 = ORIENTED_EDGE('',*,*,#388447,.F.); +#388447 = EDGE_CURVE('',#388448,#388439,#388450,.T.); +#388448 = VERTEX_POINT('',#388449); +#388449 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#388450 = LINE('',#388451,#388452); +#388451 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#388452 = VECTOR('',#388453,1.); +#388453 = DIRECTION('',(0.,0.,1.)); +#388454 = ORIENTED_EDGE('',*,*,#388455,.F.); +#388455 = EDGE_CURVE('',#388416,#388448,#388456,.T.); +#388456 = CIRCLE('',#388457,0.150000058649); +#388457 = AXIS2_PLACEMENT_3D('',#388458,#388459,#388460); +#388458 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.51)); +#388459 = DIRECTION('',(0.,0.,-1.)); +#388460 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388461 = CYLINDRICAL_SURFACE('',#388462,0.150000058649); +#388462 = AXIS2_PLACEMENT_3D('',#388463,#388464,#388465); +#388463 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.51)); +#388464 = DIRECTION('',(0.,0.,-1.)); +#388465 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388466 = ADVANCED_FACE('',(#388467),#388483,.T.); +#388467 = FACE_BOUND('',#388468,.T.); +#388468 = EDGE_LOOP('',(#388469,#388470,#388476,#388477)); +#388469 = ORIENTED_EDGE('',*,*,#388447,.T.); +#388470 = ORIENTED_EDGE('',*,*,#388471,.T.); +#388471 = EDGE_CURVE('',#388439,#388239,#388472,.T.); +#388472 = LINE('',#388473,#388474); +#388473 = CARTESIAN_POINT('',(133.95,-153.63,1.55)); +#388474 = VECTOR('',#388475,1.); +#388475 = DIRECTION('',(0.,1.,0.)); +#388476 = ORIENTED_EDGE('',*,*,#388236,.F.); +#388477 = ORIENTED_EDGE('',*,*,#388478,.F.); +#388478 = EDGE_CURVE('',#388448,#388237,#388479,.T.); +#388479 = LINE('',#388480,#388481); +#388480 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#388481 = VECTOR('',#388482,1.); +#388482 = DIRECTION('',(0.,1.,0.)); +#388483 = PLANE('',#388484); +#388484 = AXIS2_PLACEMENT_3D('',#388485,#388486,#388487); +#388485 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#388486 = DIRECTION('',(-1.,0.,0.)); +#388487 = DIRECTION('',(0.,1.,0.)); +#388488 = ADVANCED_FACE('',(#388489),#388499,.F.); +#388489 = FACE_BOUND('',#388490,.T.); +#388490 = EDGE_LOOP('',(#388491,#388492,#388493,#388494,#388495,#388496, + #388497,#388498)); +#388491 = ORIENTED_EDGE('',*,*,#388263,.T.); +#388492 = ORIENTED_EDGE('',*,*,#388295,.T.); +#388493 = ORIENTED_EDGE('',*,*,#388327,.T.); +#388494 = ORIENTED_EDGE('',*,*,#388359,.T.); +#388495 = ORIENTED_EDGE('',*,*,#388391,.T.); +#388496 = ORIENTED_EDGE('',*,*,#388423,.T.); +#388497 = ORIENTED_EDGE('',*,*,#388455,.T.); +#388498 = ORIENTED_EDGE('',*,*,#388478,.T.); +#388499 = PLANE('',#388500); +#388500 = AXIS2_PLACEMENT_3D('',#388501,#388502,#388503); +#388501 = CARTESIAN_POINT('',(0.,0.,1.51)); +#388502 = DIRECTION('',(0.,0.,1.)); +#388503 = DIRECTION('',(1.,0.,-0.)); +#388504 = ADVANCED_FACE('',(#388505),#388515,.T.); +#388505 = FACE_BOUND('',#388506,.F.); +#388506 = EDGE_LOOP('',(#388507,#388508,#388509,#388510,#388511,#388512, + #388513,#388514)); +#388507 = ORIENTED_EDGE('',*,*,#388246,.T.); +#388508 = ORIENTED_EDGE('',*,*,#388279,.T.); +#388509 = ORIENTED_EDGE('',*,*,#388310,.T.); +#388510 = ORIENTED_EDGE('',*,*,#388343,.T.); +#388511 = ORIENTED_EDGE('',*,*,#388374,.T.); +#388512 = ORIENTED_EDGE('',*,*,#388407,.T.); +#388513 = ORIENTED_EDGE('',*,*,#388438,.T.); +#388514 = ORIENTED_EDGE('',*,*,#388471,.T.); +#388515 = PLANE('',#388516); +#388516 = AXIS2_PLACEMENT_3D('',#388517,#388518,#388519); +#388517 = CARTESIAN_POINT('',(0.,0.,1.55)); +#388518 = DIRECTION('',(0.,0.,1.)); +#388519 = DIRECTION('',(1.,0.,-0.)); +#388520 = MANIFOLD_SOLID_BREP('',#388521); +#388521 = CLOSED_SHELL('',(#388522,#388564,#388595,#388628,#388659, + #388692,#388723,#388756,#388778,#388794)); +#388522 = ADVANCED_FACE('',(#388523),#388559,.T.); +#388523 = FACE_BOUND('',#388524,.T.); +#388524 = EDGE_LOOP('',(#388525,#388535,#388544,#388552)); +#388525 = ORIENTED_EDGE('',*,*,#388526,.T.); +#388526 = EDGE_CURVE('',#388527,#388529,#388531,.T.); +#388527 = VERTEX_POINT('',#388528); +#388528 = CARTESIAN_POINT('',(140.45,-152.48,1.51)); +#388529 = VERTEX_POINT('',#388530); +#388530 = CARTESIAN_POINT('',(140.45,-152.48,1.55)); +#388531 = LINE('',#388532,#388533); +#388532 = CARTESIAN_POINT('',(140.45,-152.48,1.51)); +#388533 = VECTOR('',#388534,1.); +#388534 = DIRECTION('',(0.,0.,1.)); +#388535 = ORIENTED_EDGE('',*,*,#388536,.T.); +#388536 = EDGE_CURVE('',#388529,#388537,#388539,.T.); +#388537 = VERTEX_POINT('',#388538); +#388538 = CARTESIAN_POINT('',(140.6,-152.33,1.55)); +#388539 = CIRCLE('',#388540,0.150000058649); +#388540 = AXIS2_PLACEMENT_3D('',#388541,#388542,#388543); +#388541 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.55)); +#388542 = DIRECTION('',(0.,0.,-1.)); +#388543 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388544 = ORIENTED_EDGE('',*,*,#388545,.F.); +#388545 = EDGE_CURVE('',#388546,#388537,#388548,.T.); +#388546 = VERTEX_POINT('',#388547); +#388547 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388548 = LINE('',#388549,#388550); +#388549 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388550 = VECTOR('',#388551,1.); +#388551 = DIRECTION('',(0.,0.,1.)); +#388552 = ORIENTED_EDGE('',*,*,#388553,.F.); +#388553 = EDGE_CURVE('',#388527,#388546,#388554,.T.); +#388554 = CIRCLE('',#388555,0.150000058649); +#388555 = AXIS2_PLACEMENT_3D('',#388556,#388557,#388558); +#388556 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.51)); +#388557 = DIRECTION('',(0.,0.,-1.)); +#388558 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388559 = CYLINDRICAL_SURFACE('',#388560,0.150000058649); +#388560 = AXIS2_PLACEMENT_3D('',#388561,#388562,#388563); +#388561 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.51)); +#388562 = DIRECTION('',(0.,0.,-1.)); +#388563 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388564 = ADVANCED_FACE('',(#388565),#388590,.T.); +#388565 = FACE_BOUND('',#388566,.T.); +#388566 = EDGE_LOOP('',(#388567,#388568,#388576,#388584)); +#388567 = ORIENTED_EDGE('',*,*,#388545,.T.); +#388568 = ORIENTED_EDGE('',*,*,#388569,.T.); +#388569 = EDGE_CURVE('',#388537,#388570,#388572,.T.); +#388570 = VERTEX_POINT('',#388571); +#388571 = CARTESIAN_POINT('',(140.9,-152.33,1.55)); +#388572 = LINE('',#388573,#388574); +#388573 = CARTESIAN_POINT('',(140.6,-152.33,1.55)); +#388574 = VECTOR('',#388575,1.); +#388575 = DIRECTION('',(1.,0.,0.)); +#388576 = ORIENTED_EDGE('',*,*,#388577,.F.); +#388577 = EDGE_CURVE('',#388578,#388570,#388580,.T.); +#388578 = VERTEX_POINT('',#388579); +#388579 = CARTESIAN_POINT('',(140.9,-152.33,1.51)); +#388580 = LINE('',#388581,#388582); +#388581 = CARTESIAN_POINT('',(140.9,-152.33,1.51)); +#388582 = VECTOR('',#388583,1.); +#388583 = DIRECTION('',(0.,0.,1.)); +#388584 = ORIENTED_EDGE('',*,*,#388585,.F.); +#388585 = EDGE_CURVE('',#388546,#388578,#388586,.T.); +#388586 = LINE('',#388587,#388588); +#388587 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388588 = VECTOR('',#388589,1.); +#388589 = DIRECTION('',(1.,0.,0.)); +#388590 = PLANE('',#388591); +#388591 = AXIS2_PLACEMENT_3D('',#388592,#388593,#388594); +#388592 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388593 = DIRECTION('',(0.,1.,0.)); +#388594 = DIRECTION('',(1.,0.,0.)); +#388595 = ADVANCED_FACE('',(#388596),#388623,.T.); +#388596 = FACE_BOUND('',#388597,.T.); +#388597 = EDGE_LOOP('',(#388598,#388599,#388608,#388616)); +#388598 = ORIENTED_EDGE('',*,*,#388577,.T.); +#388599 = ORIENTED_EDGE('',*,*,#388600,.T.); +#388600 = EDGE_CURVE('',#388570,#388601,#388603,.T.); +#388601 = VERTEX_POINT('',#388602); +#388602 = CARTESIAN_POINT('',(141.05,-152.48,1.55)); +#388603 = CIRCLE('',#388604,0.150000058649); +#388604 = AXIS2_PLACEMENT_3D('',#388605,#388606,#388607); +#388605 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.55)); +#388606 = DIRECTION('',(0.,0.,-1.)); +#388607 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388608 = ORIENTED_EDGE('',*,*,#388609,.F.); +#388609 = EDGE_CURVE('',#388610,#388601,#388612,.T.); +#388610 = VERTEX_POINT('',#388611); +#388611 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388612 = LINE('',#388613,#388614); +#388613 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388614 = VECTOR('',#388615,1.); +#388615 = DIRECTION('',(0.,0.,1.)); +#388616 = ORIENTED_EDGE('',*,*,#388617,.F.); +#388617 = EDGE_CURVE('',#388578,#388610,#388618,.T.); +#388618 = CIRCLE('',#388619,0.150000058649); +#388619 = AXIS2_PLACEMENT_3D('',#388620,#388621,#388622); +#388620 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.51)); +#388621 = DIRECTION('',(0.,0.,-1.)); +#388622 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388623 = CYLINDRICAL_SURFACE('',#388624,0.150000058649); +#388624 = AXIS2_PLACEMENT_3D('',#388625,#388626,#388627); +#388625 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.51)); +#388626 = DIRECTION('',(0.,0.,-1.)); +#388627 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388628 = ADVANCED_FACE('',(#388629),#388654,.T.); +#388629 = FACE_BOUND('',#388630,.T.); +#388630 = EDGE_LOOP('',(#388631,#388632,#388640,#388648)); +#388631 = ORIENTED_EDGE('',*,*,#388609,.T.); +#388632 = ORIENTED_EDGE('',*,*,#388633,.T.); +#388633 = EDGE_CURVE('',#388601,#388634,#388636,.T.); +#388634 = VERTEX_POINT('',#388635); +#388635 = CARTESIAN_POINT('',(141.05,-153.63,1.55)); +#388636 = LINE('',#388637,#388638); +#388637 = CARTESIAN_POINT('',(141.05,-152.48,1.55)); +#388638 = VECTOR('',#388639,1.); +#388639 = DIRECTION('',(0.,-1.,0.)); +#388640 = ORIENTED_EDGE('',*,*,#388641,.F.); +#388641 = EDGE_CURVE('',#388642,#388634,#388644,.T.); +#388642 = VERTEX_POINT('',#388643); +#388643 = CARTESIAN_POINT('',(141.05,-153.63,1.51)); +#388644 = LINE('',#388645,#388646); +#388645 = CARTESIAN_POINT('',(141.05,-153.63,1.51)); +#388646 = VECTOR('',#388647,1.); +#388647 = DIRECTION('',(0.,0.,1.)); +#388648 = ORIENTED_EDGE('',*,*,#388649,.F.); +#388649 = EDGE_CURVE('',#388610,#388642,#388650,.T.); +#388650 = LINE('',#388651,#388652); +#388651 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388652 = VECTOR('',#388653,1.); +#388653 = DIRECTION('',(0.,-1.,0.)); +#388654 = PLANE('',#388655); +#388655 = AXIS2_PLACEMENT_3D('',#388656,#388657,#388658); +#388656 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388657 = DIRECTION('',(1.,0.,-0.)); +#388658 = DIRECTION('',(0.,-1.,0.)); +#388659 = ADVANCED_FACE('',(#388660),#388687,.T.); +#388660 = FACE_BOUND('',#388661,.T.); +#388661 = EDGE_LOOP('',(#388662,#388663,#388672,#388680)); +#388662 = ORIENTED_EDGE('',*,*,#388641,.T.); +#388663 = ORIENTED_EDGE('',*,*,#388664,.T.); +#388664 = EDGE_CURVE('',#388634,#388665,#388667,.T.); +#388665 = VERTEX_POINT('',#388666); +#388666 = CARTESIAN_POINT('',(140.9,-153.78,1.55)); +#388667 = CIRCLE('',#388668,0.150000058649); +#388668 = AXIS2_PLACEMENT_3D('',#388669,#388670,#388671); +#388669 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.55)); +#388670 = DIRECTION('',(0.,0.,-1.)); +#388671 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388672 = ORIENTED_EDGE('',*,*,#388673,.F.); +#388673 = EDGE_CURVE('',#388674,#388665,#388676,.T.); +#388674 = VERTEX_POINT('',#388675); +#388675 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388676 = LINE('',#388677,#388678); +#388677 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388678 = VECTOR('',#388679,1.); +#388679 = DIRECTION('',(0.,0.,1.)); +#388680 = ORIENTED_EDGE('',*,*,#388681,.F.); +#388681 = EDGE_CURVE('',#388642,#388674,#388682,.T.); +#388682 = CIRCLE('',#388683,0.150000058649); +#388683 = AXIS2_PLACEMENT_3D('',#388684,#388685,#388686); +#388684 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.51)); +#388685 = DIRECTION('',(0.,0.,-1.)); +#388686 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388687 = CYLINDRICAL_SURFACE('',#388688,0.150000058649); +#388688 = AXIS2_PLACEMENT_3D('',#388689,#388690,#388691); +#388689 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.51)); +#388690 = DIRECTION('',(0.,0.,-1.)); +#388691 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388692 = ADVANCED_FACE('',(#388693),#388718,.T.); +#388693 = FACE_BOUND('',#388694,.T.); +#388694 = EDGE_LOOP('',(#388695,#388696,#388704,#388712)); +#388695 = ORIENTED_EDGE('',*,*,#388673,.T.); +#388696 = ORIENTED_EDGE('',*,*,#388697,.T.); +#388697 = EDGE_CURVE('',#388665,#388698,#388700,.T.); +#388698 = VERTEX_POINT('',#388699); +#388699 = CARTESIAN_POINT('',(140.6,-153.78,1.55)); +#388700 = LINE('',#388701,#388702); +#388701 = CARTESIAN_POINT('',(140.9,-153.78,1.55)); +#388702 = VECTOR('',#388703,1.); +#388703 = DIRECTION('',(-1.,0.,0.)); +#388704 = ORIENTED_EDGE('',*,*,#388705,.F.); +#388705 = EDGE_CURVE('',#388706,#388698,#388708,.T.); +#388706 = VERTEX_POINT('',#388707); +#388707 = CARTESIAN_POINT('',(140.6,-153.78,1.51)); +#388708 = LINE('',#388709,#388710); +#388709 = CARTESIAN_POINT('',(140.6,-153.78,1.51)); +#388710 = VECTOR('',#388711,1.); +#388711 = DIRECTION('',(0.,0.,1.)); +#388712 = ORIENTED_EDGE('',*,*,#388713,.F.); +#388713 = EDGE_CURVE('',#388674,#388706,#388714,.T.); +#388714 = LINE('',#388715,#388716); +#388715 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388716 = VECTOR('',#388717,1.); +#388717 = DIRECTION('',(-1.,0.,0.)); +#388718 = PLANE('',#388719); +#388719 = AXIS2_PLACEMENT_3D('',#388720,#388721,#388722); +#388720 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388721 = DIRECTION('',(0.,-1.,0.)); +#388722 = DIRECTION('',(-1.,0.,0.)); +#388723 = ADVANCED_FACE('',(#388724),#388751,.T.); +#388724 = FACE_BOUND('',#388725,.T.); +#388725 = EDGE_LOOP('',(#388726,#388727,#388736,#388744)); +#388726 = ORIENTED_EDGE('',*,*,#388705,.T.); +#388727 = ORIENTED_EDGE('',*,*,#388728,.T.); +#388728 = EDGE_CURVE('',#388698,#388729,#388731,.T.); +#388729 = VERTEX_POINT('',#388730); +#388730 = CARTESIAN_POINT('',(140.45,-153.63,1.55)); +#388731 = CIRCLE('',#388732,0.150000058649); +#388732 = AXIS2_PLACEMENT_3D('',#388733,#388734,#388735); +#388733 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.55)); +#388734 = DIRECTION('',(0.,0.,-1.)); +#388735 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388736 = ORIENTED_EDGE('',*,*,#388737,.F.); +#388737 = EDGE_CURVE('',#388738,#388729,#388740,.T.); +#388738 = VERTEX_POINT('',#388739); +#388739 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#388740 = LINE('',#388741,#388742); +#388741 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#388742 = VECTOR('',#388743,1.); +#388743 = DIRECTION('',(0.,0.,1.)); +#388744 = ORIENTED_EDGE('',*,*,#388745,.F.); +#388745 = EDGE_CURVE('',#388706,#388738,#388746,.T.); +#388746 = CIRCLE('',#388747,0.150000058649); +#388747 = AXIS2_PLACEMENT_3D('',#388748,#388749,#388750); +#388748 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.51)); +#388749 = DIRECTION('',(0.,0.,-1.)); +#388750 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388751 = CYLINDRICAL_SURFACE('',#388752,0.150000058649); +#388752 = AXIS2_PLACEMENT_3D('',#388753,#388754,#388755); +#388753 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.51)); +#388754 = DIRECTION('',(0.,0.,-1.)); +#388755 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#388756 = ADVANCED_FACE('',(#388757),#388773,.T.); +#388757 = FACE_BOUND('',#388758,.T.); +#388758 = EDGE_LOOP('',(#388759,#388760,#388766,#388767)); +#388759 = ORIENTED_EDGE('',*,*,#388737,.T.); +#388760 = ORIENTED_EDGE('',*,*,#388761,.T.); +#388761 = EDGE_CURVE('',#388729,#388529,#388762,.T.); +#388762 = LINE('',#388763,#388764); +#388763 = CARTESIAN_POINT('',(140.45,-153.63,1.55)); +#388764 = VECTOR('',#388765,1.); +#388765 = DIRECTION('',(0.,1.,0.)); +#388766 = ORIENTED_EDGE('',*,*,#388526,.F.); +#388767 = ORIENTED_EDGE('',*,*,#388768,.F.); +#388768 = EDGE_CURVE('',#388738,#388527,#388769,.T.); +#388769 = LINE('',#388770,#388771); +#388770 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#388771 = VECTOR('',#388772,1.); +#388772 = DIRECTION('',(0.,1.,0.)); +#388773 = PLANE('',#388774); +#388774 = AXIS2_PLACEMENT_3D('',#388775,#388776,#388777); +#388775 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#388776 = DIRECTION('',(-1.,0.,0.)); +#388777 = DIRECTION('',(0.,1.,0.)); +#388778 = ADVANCED_FACE('',(#388779),#388789,.F.); +#388779 = FACE_BOUND('',#388780,.T.); +#388780 = EDGE_LOOP('',(#388781,#388782,#388783,#388784,#388785,#388786, + #388787,#388788)); +#388781 = ORIENTED_EDGE('',*,*,#388553,.T.); +#388782 = ORIENTED_EDGE('',*,*,#388585,.T.); +#388783 = ORIENTED_EDGE('',*,*,#388617,.T.); +#388784 = ORIENTED_EDGE('',*,*,#388649,.T.); +#388785 = ORIENTED_EDGE('',*,*,#388681,.T.); +#388786 = ORIENTED_EDGE('',*,*,#388713,.T.); +#388787 = ORIENTED_EDGE('',*,*,#388745,.T.); +#388788 = ORIENTED_EDGE('',*,*,#388768,.T.); +#388789 = PLANE('',#388790); +#388790 = AXIS2_PLACEMENT_3D('',#388791,#388792,#388793); +#388791 = CARTESIAN_POINT('',(0.,0.,1.51)); +#388792 = DIRECTION('',(0.,0.,1.)); +#388793 = DIRECTION('',(1.,0.,-0.)); +#388794 = ADVANCED_FACE('',(#388795),#388805,.T.); +#388795 = FACE_BOUND('',#388796,.F.); +#388796 = EDGE_LOOP('',(#388797,#388798,#388799,#388800,#388801,#388802, + #388803,#388804)); +#388797 = ORIENTED_EDGE('',*,*,#388536,.T.); +#388798 = ORIENTED_EDGE('',*,*,#388569,.T.); +#388799 = ORIENTED_EDGE('',*,*,#388600,.T.); +#388800 = ORIENTED_EDGE('',*,*,#388633,.T.); +#388801 = ORIENTED_EDGE('',*,*,#388664,.T.); +#388802 = ORIENTED_EDGE('',*,*,#388697,.T.); +#388803 = ORIENTED_EDGE('',*,*,#388728,.T.); +#388804 = ORIENTED_EDGE('',*,*,#388761,.T.); +#388805 = PLANE('',#388806); +#388806 = AXIS2_PLACEMENT_3D('',#388807,#388808,#388809); +#388807 = CARTESIAN_POINT('',(0.,0.,1.55)); +#388808 = DIRECTION('',(0.,0.,1.)); +#388809 = DIRECTION('',(1.,0.,-0.)); +#388810 = MANIFOLD_SOLID_BREP('',#388811); +#388811 = CLOSED_SHELL('',(#388812,#388854,#388885,#388918,#388949, + #388982,#389013,#389046,#389068,#389084)); +#388812 = ADVANCED_FACE('',(#388813),#388849,.T.); +#388813 = FACE_BOUND('',#388814,.T.); +#388814 = EDGE_LOOP('',(#388815,#388825,#388834,#388842)); +#388815 = ORIENTED_EDGE('',*,*,#388816,.T.); +#388816 = EDGE_CURVE('',#388817,#388819,#388821,.T.); +#388817 = VERTEX_POINT('',#388818); +#388818 = CARTESIAN_POINT('',(140.45,-152.48,1.51)); +#388819 = VERTEX_POINT('',#388820); +#388820 = CARTESIAN_POINT('',(140.45,-152.48,1.55)); +#388821 = LINE('',#388822,#388823); +#388822 = CARTESIAN_POINT('',(140.45,-152.48,1.51)); +#388823 = VECTOR('',#388824,1.); +#388824 = DIRECTION('',(0.,0.,1.)); +#388825 = ORIENTED_EDGE('',*,*,#388826,.T.); +#388826 = EDGE_CURVE('',#388819,#388827,#388829,.T.); +#388827 = VERTEX_POINT('',#388828); +#388828 = CARTESIAN_POINT('',(140.6,-152.33,1.55)); +#388829 = CIRCLE('',#388830,0.150000058649); +#388830 = AXIS2_PLACEMENT_3D('',#388831,#388832,#388833); +#388831 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.55)); +#388832 = DIRECTION('',(0.,0.,-1.)); +#388833 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388834 = ORIENTED_EDGE('',*,*,#388835,.F.); +#388835 = EDGE_CURVE('',#388836,#388827,#388838,.T.); +#388836 = VERTEX_POINT('',#388837); +#388837 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388838 = LINE('',#388839,#388840); +#388839 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388840 = VECTOR('',#388841,1.); +#388841 = DIRECTION('',(0.,0.,1.)); +#388842 = ORIENTED_EDGE('',*,*,#388843,.F.); +#388843 = EDGE_CURVE('',#388817,#388836,#388844,.T.); +#388844 = CIRCLE('',#388845,0.150000058649); +#388845 = AXIS2_PLACEMENT_3D('',#388846,#388847,#388848); +#388846 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.51)); +#388847 = DIRECTION('',(0.,0.,-1.)); +#388848 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388849 = CYLINDRICAL_SURFACE('',#388850,0.150000058649); +#388850 = AXIS2_PLACEMENT_3D('',#388851,#388852,#388853); +#388851 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.51)); +#388852 = DIRECTION('',(0.,0.,-1.)); +#388853 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#388854 = ADVANCED_FACE('',(#388855),#388880,.T.); +#388855 = FACE_BOUND('',#388856,.T.); +#388856 = EDGE_LOOP('',(#388857,#388858,#388866,#388874)); +#388857 = ORIENTED_EDGE('',*,*,#388835,.T.); +#388858 = ORIENTED_EDGE('',*,*,#388859,.T.); +#388859 = EDGE_CURVE('',#388827,#388860,#388862,.T.); +#388860 = VERTEX_POINT('',#388861); +#388861 = CARTESIAN_POINT('',(140.9,-152.33,1.55)); +#388862 = LINE('',#388863,#388864); +#388863 = CARTESIAN_POINT('',(140.6,-152.33,1.55)); +#388864 = VECTOR('',#388865,1.); +#388865 = DIRECTION('',(1.,0.,0.)); +#388866 = ORIENTED_EDGE('',*,*,#388867,.F.); +#388867 = EDGE_CURVE('',#388868,#388860,#388870,.T.); +#388868 = VERTEX_POINT('',#388869); +#388869 = CARTESIAN_POINT('',(140.9,-152.33,1.51)); +#388870 = LINE('',#388871,#388872); +#388871 = CARTESIAN_POINT('',(140.9,-152.33,1.51)); +#388872 = VECTOR('',#388873,1.); +#388873 = DIRECTION('',(0.,0.,1.)); +#388874 = ORIENTED_EDGE('',*,*,#388875,.F.); +#388875 = EDGE_CURVE('',#388836,#388868,#388876,.T.); +#388876 = LINE('',#388877,#388878); +#388877 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388878 = VECTOR('',#388879,1.); +#388879 = DIRECTION('',(1.,0.,0.)); +#388880 = PLANE('',#388881); +#388881 = AXIS2_PLACEMENT_3D('',#388882,#388883,#388884); +#388882 = CARTESIAN_POINT('',(140.6,-152.33,1.51)); +#388883 = DIRECTION('',(0.,1.,0.)); +#388884 = DIRECTION('',(1.,0.,0.)); +#388885 = ADVANCED_FACE('',(#388886),#388913,.T.); +#388886 = FACE_BOUND('',#388887,.T.); +#388887 = EDGE_LOOP('',(#388888,#388889,#388898,#388906)); +#388888 = ORIENTED_EDGE('',*,*,#388867,.T.); +#388889 = ORIENTED_EDGE('',*,*,#388890,.T.); +#388890 = EDGE_CURVE('',#388860,#388891,#388893,.T.); +#388891 = VERTEX_POINT('',#388892); +#388892 = CARTESIAN_POINT('',(141.05,-152.48,1.55)); +#388893 = CIRCLE('',#388894,0.150000058649); +#388894 = AXIS2_PLACEMENT_3D('',#388895,#388896,#388897); +#388895 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.55)); +#388896 = DIRECTION('',(0.,0.,-1.)); +#388897 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388898 = ORIENTED_EDGE('',*,*,#388899,.F.); +#388899 = EDGE_CURVE('',#388900,#388891,#388902,.T.); +#388900 = VERTEX_POINT('',#388901); +#388901 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388902 = LINE('',#388903,#388904); +#388903 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388904 = VECTOR('',#388905,1.); +#388905 = DIRECTION('',(0.,0.,1.)); +#388906 = ORIENTED_EDGE('',*,*,#388907,.F.); +#388907 = EDGE_CURVE('',#388868,#388900,#388908,.T.); +#388908 = CIRCLE('',#388909,0.150000058649); +#388909 = AXIS2_PLACEMENT_3D('',#388910,#388911,#388912); +#388910 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.51)); +#388911 = DIRECTION('',(0.,0.,-1.)); +#388912 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388913 = CYLINDRICAL_SURFACE('',#388914,0.150000058649); +#388914 = AXIS2_PLACEMENT_3D('',#388915,#388916,#388917); +#388915 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.51)); +#388916 = DIRECTION('',(0.,0.,-1.)); +#388917 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#388918 = ADVANCED_FACE('',(#388919),#388944,.T.); +#388919 = FACE_BOUND('',#388920,.T.); +#388920 = EDGE_LOOP('',(#388921,#388922,#388930,#388938)); +#388921 = ORIENTED_EDGE('',*,*,#388899,.T.); +#388922 = ORIENTED_EDGE('',*,*,#388923,.T.); +#388923 = EDGE_CURVE('',#388891,#388924,#388926,.T.); +#388924 = VERTEX_POINT('',#388925); +#388925 = CARTESIAN_POINT('',(141.05,-153.63,1.55)); +#388926 = LINE('',#388927,#388928); +#388927 = CARTESIAN_POINT('',(141.05,-152.48,1.55)); +#388928 = VECTOR('',#388929,1.); +#388929 = DIRECTION('',(0.,-1.,0.)); +#388930 = ORIENTED_EDGE('',*,*,#388931,.F.); +#388931 = EDGE_CURVE('',#388932,#388924,#388934,.T.); +#388932 = VERTEX_POINT('',#388933); +#388933 = CARTESIAN_POINT('',(141.05,-153.63,1.51)); +#388934 = LINE('',#388935,#388936); +#388935 = CARTESIAN_POINT('',(141.05,-153.63,1.51)); +#388936 = VECTOR('',#388937,1.); +#388937 = DIRECTION('',(0.,0.,1.)); +#388938 = ORIENTED_EDGE('',*,*,#388939,.F.); +#388939 = EDGE_CURVE('',#388900,#388932,#388940,.T.); +#388940 = LINE('',#388941,#388942); +#388941 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388942 = VECTOR('',#388943,1.); +#388943 = DIRECTION('',(0.,-1.,0.)); +#388944 = PLANE('',#388945); +#388945 = AXIS2_PLACEMENT_3D('',#388946,#388947,#388948); +#388946 = CARTESIAN_POINT('',(141.05,-152.48,1.51)); +#388947 = DIRECTION('',(1.,0.,-0.)); +#388948 = DIRECTION('',(0.,-1.,0.)); +#388949 = ADVANCED_FACE('',(#388950),#388977,.T.); +#388950 = FACE_BOUND('',#388951,.T.); +#388951 = EDGE_LOOP('',(#388952,#388953,#388962,#388970)); +#388952 = ORIENTED_EDGE('',*,*,#388931,.T.); +#388953 = ORIENTED_EDGE('',*,*,#388954,.T.); +#388954 = EDGE_CURVE('',#388924,#388955,#388957,.T.); +#388955 = VERTEX_POINT('',#388956); +#388956 = CARTESIAN_POINT('',(140.9,-153.78,1.55)); +#388957 = CIRCLE('',#388958,0.150000058649); +#388958 = AXIS2_PLACEMENT_3D('',#388959,#388960,#388961); +#388959 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.55)); +#388960 = DIRECTION('',(0.,0.,-1.)); +#388961 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388962 = ORIENTED_EDGE('',*,*,#388963,.F.); +#388963 = EDGE_CURVE('',#388964,#388955,#388966,.T.); +#388964 = VERTEX_POINT('',#388965); +#388965 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388966 = LINE('',#388967,#388968); +#388967 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#388968 = VECTOR('',#388969,1.); +#388969 = DIRECTION('',(0.,0.,1.)); +#388970 = ORIENTED_EDGE('',*,*,#388971,.F.); +#388971 = EDGE_CURVE('',#388932,#388964,#388972,.T.); +#388972 = CIRCLE('',#388973,0.150000058649); +#388973 = AXIS2_PLACEMENT_3D('',#388974,#388975,#388976); +#388974 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.51)); +#388975 = DIRECTION('',(0.,0.,-1.)); +#388976 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388977 = CYLINDRICAL_SURFACE('',#388978,0.150000058649); +#388978 = AXIS2_PLACEMENT_3D('',#388979,#388980,#388981); +#388979 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.51)); +#388980 = DIRECTION('',(0.,0.,-1.)); +#388981 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#388982 = ADVANCED_FACE('',(#388983),#389008,.T.); +#388983 = FACE_BOUND('',#388984,.T.); +#388984 = EDGE_LOOP('',(#388985,#388986,#388994,#389002)); +#388985 = ORIENTED_EDGE('',*,*,#388963,.T.); +#388986 = ORIENTED_EDGE('',*,*,#388987,.T.); +#388987 = EDGE_CURVE('',#388955,#388988,#388990,.T.); +#388988 = VERTEX_POINT('',#388989); +#388989 = CARTESIAN_POINT('',(140.6,-153.78,1.55)); +#388990 = LINE('',#388991,#388992); +#388991 = CARTESIAN_POINT('',(140.9,-153.78,1.55)); +#388992 = VECTOR('',#388993,1.); +#388993 = DIRECTION('',(-1.,0.,0.)); +#388994 = ORIENTED_EDGE('',*,*,#388995,.F.); +#388995 = EDGE_CURVE('',#388996,#388988,#388998,.T.); +#388996 = VERTEX_POINT('',#388997); +#388997 = CARTESIAN_POINT('',(140.6,-153.78,1.51)); +#388998 = LINE('',#388999,#389000); +#388999 = CARTESIAN_POINT('',(140.6,-153.78,1.51)); +#389000 = VECTOR('',#389001,1.); +#389001 = DIRECTION('',(0.,0.,1.)); +#389002 = ORIENTED_EDGE('',*,*,#389003,.F.); +#389003 = EDGE_CURVE('',#388964,#388996,#389004,.T.); +#389004 = LINE('',#389005,#389006); +#389005 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#389006 = VECTOR('',#389007,1.); +#389007 = DIRECTION('',(-1.,0.,0.)); +#389008 = PLANE('',#389009); +#389009 = AXIS2_PLACEMENT_3D('',#389010,#389011,#389012); +#389010 = CARTESIAN_POINT('',(140.9,-153.78,1.51)); +#389011 = DIRECTION('',(0.,-1.,0.)); +#389012 = DIRECTION('',(-1.,0.,0.)); +#389013 = ADVANCED_FACE('',(#389014),#389041,.T.); +#389014 = FACE_BOUND('',#389015,.T.); +#389015 = EDGE_LOOP('',(#389016,#389017,#389026,#389034)); +#389016 = ORIENTED_EDGE('',*,*,#388995,.T.); +#389017 = ORIENTED_EDGE('',*,*,#389018,.T.); +#389018 = EDGE_CURVE('',#388988,#389019,#389021,.T.); +#389019 = VERTEX_POINT('',#389020); +#389020 = CARTESIAN_POINT('',(140.45,-153.63,1.55)); +#389021 = CIRCLE('',#389022,0.150000058649); +#389022 = AXIS2_PLACEMENT_3D('',#389023,#389024,#389025); +#389023 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.55)); +#389024 = DIRECTION('',(0.,0.,-1.)); +#389025 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389026 = ORIENTED_EDGE('',*,*,#389027,.F.); +#389027 = EDGE_CURVE('',#389028,#389019,#389030,.T.); +#389028 = VERTEX_POINT('',#389029); +#389029 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#389030 = LINE('',#389031,#389032); +#389031 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#389032 = VECTOR('',#389033,1.); +#389033 = DIRECTION('',(0.,0.,1.)); +#389034 = ORIENTED_EDGE('',*,*,#389035,.F.); +#389035 = EDGE_CURVE('',#388996,#389028,#389036,.T.); +#389036 = CIRCLE('',#389037,0.150000058649); +#389037 = AXIS2_PLACEMENT_3D('',#389038,#389039,#389040); +#389038 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.51)); +#389039 = DIRECTION('',(0.,0.,-1.)); +#389040 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389041 = CYLINDRICAL_SURFACE('',#389042,0.150000058649); +#389042 = AXIS2_PLACEMENT_3D('',#389043,#389044,#389045); +#389043 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.51)); +#389044 = DIRECTION('',(0.,0.,-1.)); +#389045 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389046 = ADVANCED_FACE('',(#389047),#389063,.T.); +#389047 = FACE_BOUND('',#389048,.T.); +#389048 = EDGE_LOOP('',(#389049,#389050,#389056,#389057)); +#389049 = ORIENTED_EDGE('',*,*,#389027,.T.); +#389050 = ORIENTED_EDGE('',*,*,#389051,.T.); +#389051 = EDGE_CURVE('',#389019,#388819,#389052,.T.); +#389052 = LINE('',#389053,#389054); +#389053 = CARTESIAN_POINT('',(140.45,-153.63,1.55)); +#389054 = VECTOR('',#389055,1.); +#389055 = DIRECTION('',(0.,1.,0.)); +#389056 = ORIENTED_EDGE('',*,*,#388816,.F.); +#389057 = ORIENTED_EDGE('',*,*,#389058,.F.); +#389058 = EDGE_CURVE('',#389028,#388817,#389059,.T.); +#389059 = LINE('',#389060,#389061); +#389060 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#389061 = VECTOR('',#389062,1.); +#389062 = DIRECTION('',(0.,1.,0.)); +#389063 = PLANE('',#389064); +#389064 = AXIS2_PLACEMENT_3D('',#389065,#389066,#389067); +#389065 = CARTESIAN_POINT('',(140.45,-153.63,1.51)); +#389066 = DIRECTION('',(-1.,0.,0.)); +#389067 = DIRECTION('',(0.,1.,0.)); +#389068 = ADVANCED_FACE('',(#389069),#389079,.F.); +#389069 = FACE_BOUND('',#389070,.T.); +#389070 = EDGE_LOOP('',(#389071,#389072,#389073,#389074,#389075,#389076, + #389077,#389078)); +#389071 = ORIENTED_EDGE('',*,*,#388843,.T.); +#389072 = ORIENTED_EDGE('',*,*,#388875,.T.); +#389073 = ORIENTED_EDGE('',*,*,#388907,.T.); +#389074 = ORIENTED_EDGE('',*,*,#388939,.T.); +#389075 = ORIENTED_EDGE('',*,*,#388971,.T.); +#389076 = ORIENTED_EDGE('',*,*,#389003,.T.); +#389077 = ORIENTED_EDGE('',*,*,#389035,.T.); +#389078 = ORIENTED_EDGE('',*,*,#389058,.T.); +#389079 = PLANE('',#389080); +#389080 = AXIS2_PLACEMENT_3D('',#389081,#389082,#389083); +#389081 = CARTESIAN_POINT('',(0.,0.,1.51)); +#389082 = DIRECTION('',(0.,0.,1.)); +#389083 = DIRECTION('',(1.,0.,-0.)); +#389084 = ADVANCED_FACE('',(#389085),#389095,.T.); +#389085 = FACE_BOUND('',#389086,.F.); +#389086 = EDGE_LOOP('',(#389087,#389088,#389089,#389090,#389091,#389092, + #389093,#389094)); +#389087 = ORIENTED_EDGE('',*,*,#388826,.T.); +#389088 = ORIENTED_EDGE('',*,*,#388859,.T.); +#389089 = ORIENTED_EDGE('',*,*,#388890,.T.); +#389090 = ORIENTED_EDGE('',*,*,#388923,.T.); +#389091 = ORIENTED_EDGE('',*,*,#388954,.T.); +#389092 = ORIENTED_EDGE('',*,*,#388987,.T.); +#389093 = ORIENTED_EDGE('',*,*,#389018,.T.); +#389094 = ORIENTED_EDGE('',*,*,#389051,.T.); +#389095 = PLANE('',#389096); +#389096 = AXIS2_PLACEMENT_3D('',#389097,#389098,#389099); +#389097 = CARTESIAN_POINT('',(0.,0.,1.55)); +#389098 = DIRECTION('',(0.,0.,1.)); +#389099 = DIRECTION('',(1.,0.,-0.)); +#389100 = MANIFOLD_SOLID_BREP('',#389101); +#389101 = CLOSED_SHELL('',(#389102,#389144,#389175,#389208,#389239, + #389272,#389303,#389336,#389358,#389374)); +#389102 = ADVANCED_FACE('',(#389103),#389139,.T.); +#389103 = FACE_BOUND('',#389104,.T.); +#389104 = EDGE_LOOP('',(#389105,#389115,#389124,#389132)); +#389105 = ORIENTED_EDGE('',*,*,#389106,.T.); +#389106 = EDGE_CURVE('',#389107,#389109,#389111,.T.); +#389107 = VERTEX_POINT('',#389108); +#389108 = CARTESIAN_POINT('',(133.95,-152.48,1.51)); +#389109 = VERTEX_POINT('',#389110); +#389110 = CARTESIAN_POINT('',(133.95,-152.48,1.55)); +#389111 = LINE('',#389112,#389113); +#389112 = CARTESIAN_POINT('',(133.95,-152.48,1.51)); +#389113 = VECTOR('',#389114,1.); +#389114 = DIRECTION('',(0.,0.,1.)); +#389115 = ORIENTED_EDGE('',*,*,#389116,.T.); +#389116 = EDGE_CURVE('',#389109,#389117,#389119,.T.); +#389117 = VERTEX_POINT('',#389118); +#389118 = CARTESIAN_POINT('',(134.1,-152.33,1.55)); +#389119 = CIRCLE('',#389120,0.150000058649); +#389120 = AXIS2_PLACEMENT_3D('',#389121,#389122,#389123); +#389121 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.55)); +#389122 = DIRECTION('',(0.,0.,-1.)); +#389123 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#389124 = ORIENTED_EDGE('',*,*,#389125,.F.); +#389125 = EDGE_CURVE('',#389126,#389117,#389128,.T.); +#389126 = VERTEX_POINT('',#389127); +#389127 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#389128 = LINE('',#389129,#389130); +#389129 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#389130 = VECTOR('',#389131,1.); +#389131 = DIRECTION('',(0.,0.,1.)); +#389132 = ORIENTED_EDGE('',*,*,#389133,.F.); +#389133 = EDGE_CURVE('',#389107,#389126,#389134,.T.); +#389134 = CIRCLE('',#389135,0.150000058649); +#389135 = AXIS2_PLACEMENT_3D('',#389136,#389137,#389138); +#389136 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.51)); +#389137 = DIRECTION('',(0.,0.,-1.)); +#389138 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#389139 = CYLINDRICAL_SURFACE('',#389140,0.150000058649); +#389140 = AXIS2_PLACEMENT_3D('',#389141,#389142,#389143); +#389141 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.51)); +#389142 = DIRECTION('',(0.,0.,-1.)); +#389143 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#389144 = ADVANCED_FACE('',(#389145),#389170,.T.); +#389145 = FACE_BOUND('',#389146,.T.); +#389146 = EDGE_LOOP('',(#389147,#389148,#389156,#389164)); +#389147 = ORIENTED_EDGE('',*,*,#389125,.T.); +#389148 = ORIENTED_EDGE('',*,*,#389149,.T.); +#389149 = EDGE_CURVE('',#389117,#389150,#389152,.T.); +#389150 = VERTEX_POINT('',#389151); +#389151 = CARTESIAN_POINT('',(134.4,-152.33,1.55)); +#389152 = LINE('',#389153,#389154); +#389153 = CARTESIAN_POINT('',(134.1,-152.33,1.55)); +#389154 = VECTOR('',#389155,1.); +#389155 = DIRECTION('',(1.,0.,0.)); +#389156 = ORIENTED_EDGE('',*,*,#389157,.F.); +#389157 = EDGE_CURVE('',#389158,#389150,#389160,.T.); +#389158 = VERTEX_POINT('',#389159); +#389159 = CARTESIAN_POINT('',(134.4,-152.33,1.51)); +#389160 = LINE('',#389161,#389162); +#389161 = CARTESIAN_POINT('',(134.4,-152.33,1.51)); +#389162 = VECTOR('',#389163,1.); +#389163 = DIRECTION('',(0.,0.,1.)); +#389164 = ORIENTED_EDGE('',*,*,#389165,.F.); +#389165 = EDGE_CURVE('',#389126,#389158,#389166,.T.); +#389166 = LINE('',#389167,#389168); +#389167 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#389168 = VECTOR('',#389169,1.); +#389169 = DIRECTION('',(1.,0.,0.)); +#389170 = PLANE('',#389171); +#389171 = AXIS2_PLACEMENT_3D('',#389172,#389173,#389174); +#389172 = CARTESIAN_POINT('',(134.1,-152.33,1.51)); +#389173 = DIRECTION('',(0.,1.,0.)); +#389174 = DIRECTION('',(1.,0.,0.)); +#389175 = ADVANCED_FACE('',(#389176),#389203,.T.); +#389176 = FACE_BOUND('',#389177,.T.); +#389177 = EDGE_LOOP('',(#389178,#389179,#389188,#389196)); +#389178 = ORIENTED_EDGE('',*,*,#389157,.T.); +#389179 = ORIENTED_EDGE('',*,*,#389180,.T.); +#389180 = EDGE_CURVE('',#389150,#389181,#389183,.T.); +#389181 = VERTEX_POINT('',#389182); +#389182 = CARTESIAN_POINT('',(134.55,-152.48,1.55)); +#389183 = CIRCLE('',#389184,0.150000058649); +#389184 = AXIS2_PLACEMENT_3D('',#389185,#389186,#389187); +#389185 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.55)); +#389186 = DIRECTION('',(0.,0.,-1.)); +#389187 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#389188 = ORIENTED_EDGE('',*,*,#389189,.F.); +#389189 = EDGE_CURVE('',#389190,#389181,#389192,.T.); +#389190 = VERTEX_POINT('',#389191); +#389191 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#389192 = LINE('',#389193,#389194); +#389193 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#389194 = VECTOR('',#389195,1.); +#389195 = DIRECTION('',(0.,0.,1.)); +#389196 = ORIENTED_EDGE('',*,*,#389197,.F.); +#389197 = EDGE_CURVE('',#389158,#389190,#389198,.T.); +#389198 = CIRCLE('',#389199,0.150000058649); +#389199 = AXIS2_PLACEMENT_3D('',#389200,#389201,#389202); +#389200 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.51)); +#389201 = DIRECTION('',(0.,0.,-1.)); +#389202 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#389203 = CYLINDRICAL_SURFACE('',#389204,0.150000058649); +#389204 = AXIS2_PLACEMENT_3D('',#389205,#389206,#389207); +#389205 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.51)); +#389206 = DIRECTION('',(0.,0.,-1.)); +#389207 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#389208 = ADVANCED_FACE('',(#389209),#389234,.T.); +#389209 = FACE_BOUND('',#389210,.T.); +#389210 = EDGE_LOOP('',(#389211,#389212,#389220,#389228)); +#389211 = ORIENTED_EDGE('',*,*,#389189,.T.); +#389212 = ORIENTED_EDGE('',*,*,#389213,.T.); +#389213 = EDGE_CURVE('',#389181,#389214,#389216,.T.); +#389214 = VERTEX_POINT('',#389215); +#389215 = CARTESIAN_POINT('',(134.55,-153.63,1.55)); +#389216 = LINE('',#389217,#389218); +#389217 = CARTESIAN_POINT('',(134.55,-152.48,1.55)); +#389218 = VECTOR('',#389219,1.); +#389219 = DIRECTION('',(0.,-1.,0.)); +#389220 = ORIENTED_EDGE('',*,*,#389221,.F.); +#389221 = EDGE_CURVE('',#389222,#389214,#389224,.T.); +#389222 = VERTEX_POINT('',#389223); +#389223 = CARTESIAN_POINT('',(134.55,-153.63,1.51)); +#389224 = LINE('',#389225,#389226); +#389225 = CARTESIAN_POINT('',(134.55,-153.63,1.51)); +#389226 = VECTOR('',#389227,1.); +#389227 = DIRECTION('',(0.,0.,1.)); +#389228 = ORIENTED_EDGE('',*,*,#389229,.F.); +#389229 = EDGE_CURVE('',#389190,#389222,#389230,.T.); +#389230 = LINE('',#389231,#389232); +#389231 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#389232 = VECTOR('',#389233,1.); +#389233 = DIRECTION('',(0.,-1.,0.)); +#389234 = PLANE('',#389235); +#389235 = AXIS2_PLACEMENT_3D('',#389236,#389237,#389238); +#389236 = CARTESIAN_POINT('',(134.55,-152.48,1.51)); +#389237 = DIRECTION('',(1.,0.,-0.)); +#389238 = DIRECTION('',(0.,-1.,0.)); +#389239 = ADVANCED_FACE('',(#389240),#389267,.T.); +#389240 = FACE_BOUND('',#389241,.T.); +#389241 = EDGE_LOOP('',(#389242,#389243,#389252,#389260)); +#389242 = ORIENTED_EDGE('',*,*,#389221,.T.); +#389243 = ORIENTED_EDGE('',*,*,#389244,.T.); +#389244 = EDGE_CURVE('',#389214,#389245,#389247,.T.); +#389245 = VERTEX_POINT('',#389246); +#389246 = CARTESIAN_POINT('',(134.4,-153.78,1.55)); +#389247 = CIRCLE('',#389248,0.150000058649); +#389248 = AXIS2_PLACEMENT_3D('',#389249,#389250,#389251); +#389249 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.55)); +#389250 = DIRECTION('',(0.,0.,-1.)); +#389251 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#389252 = ORIENTED_EDGE('',*,*,#389253,.F.); +#389253 = EDGE_CURVE('',#389254,#389245,#389256,.T.); +#389254 = VERTEX_POINT('',#389255); +#389255 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#389256 = LINE('',#389257,#389258); +#389257 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#389258 = VECTOR('',#389259,1.); +#389259 = DIRECTION('',(0.,0.,1.)); +#389260 = ORIENTED_EDGE('',*,*,#389261,.F.); +#389261 = EDGE_CURVE('',#389222,#389254,#389262,.T.); +#389262 = CIRCLE('',#389263,0.150000058649); +#389263 = AXIS2_PLACEMENT_3D('',#389264,#389265,#389266); +#389264 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.51)); +#389265 = DIRECTION('',(0.,0.,-1.)); +#389266 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#389267 = CYLINDRICAL_SURFACE('',#389268,0.150000058649); +#389268 = AXIS2_PLACEMENT_3D('',#389269,#389270,#389271); +#389269 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.51)); +#389270 = DIRECTION('',(0.,0.,-1.)); +#389271 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#389272 = ADVANCED_FACE('',(#389273),#389298,.T.); +#389273 = FACE_BOUND('',#389274,.T.); +#389274 = EDGE_LOOP('',(#389275,#389276,#389284,#389292)); +#389275 = ORIENTED_EDGE('',*,*,#389253,.T.); +#389276 = ORIENTED_EDGE('',*,*,#389277,.T.); +#389277 = EDGE_CURVE('',#389245,#389278,#389280,.T.); +#389278 = VERTEX_POINT('',#389279); +#389279 = CARTESIAN_POINT('',(134.1,-153.78,1.55)); +#389280 = LINE('',#389281,#389282); +#389281 = CARTESIAN_POINT('',(134.4,-153.78,1.55)); +#389282 = VECTOR('',#389283,1.); +#389283 = DIRECTION('',(-1.,0.,0.)); +#389284 = ORIENTED_EDGE('',*,*,#389285,.F.); +#389285 = EDGE_CURVE('',#389286,#389278,#389288,.T.); +#389286 = VERTEX_POINT('',#389287); +#389287 = CARTESIAN_POINT('',(134.1,-153.78,1.51)); +#389288 = LINE('',#389289,#389290); +#389289 = CARTESIAN_POINT('',(134.1,-153.78,1.51)); +#389290 = VECTOR('',#389291,1.); +#389291 = DIRECTION('',(0.,0.,1.)); +#389292 = ORIENTED_EDGE('',*,*,#389293,.F.); +#389293 = EDGE_CURVE('',#389254,#389286,#389294,.T.); +#389294 = LINE('',#389295,#389296); +#389295 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#389296 = VECTOR('',#389297,1.); +#389297 = DIRECTION('',(-1.,0.,0.)); +#389298 = PLANE('',#389299); +#389299 = AXIS2_PLACEMENT_3D('',#389300,#389301,#389302); +#389300 = CARTESIAN_POINT('',(134.4,-153.78,1.51)); +#389301 = DIRECTION('',(0.,-1.,0.)); +#389302 = DIRECTION('',(-1.,0.,0.)); +#389303 = ADVANCED_FACE('',(#389304),#389331,.T.); +#389304 = FACE_BOUND('',#389305,.T.); +#389305 = EDGE_LOOP('',(#389306,#389307,#389316,#389324)); +#389306 = ORIENTED_EDGE('',*,*,#389285,.T.); +#389307 = ORIENTED_EDGE('',*,*,#389308,.T.); +#389308 = EDGE_CURVE('',#389278,#389309,#389311,.T.); +#389309 = VERTEX_POINT('',#389310); +#389310 = CARTESIAN_POINT('',(133.95,-153.63,1.55)); +#389311 = CIRCLE('',#389312,0.150000058649); +#389312 = AXIS2_PLACEMENT_3D('',#389313,#389314,#389315); +#389313 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.55)); +#389314 = DIRECTION('',(0.,0.,-1.)); +#389315 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389316 = ORIENTED_EDGE('',*,*,#389317,.F.); +#389317 = EDGE_CURVE('',#389318,#389309,#389320,.T.); +#389318 = VERTEX_POINT('',#389319); +#389319 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#389320 = LINE('',#389321,#389322); +#389321 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#389322 = VECTOR('',#389323,1.); +#389323 = DIRECTION('',(0.,0.,1.)); +#389324 = ORIENTED_EDGE('',*,*,#389325,.F.); +#389325 = EDGE_CURVE('',#389286,#389318,#389326,.T.); +#389326 = CIRCLE('',#389327,0.150000058649); +#389327 = AXIS2_PLACEMENT_3D('',#389328,#389329,#389330); +#389328 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.51)); +#389329 = DIRECTION('',(0.,0.,-1.)); +#389330 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389331 = CYLINDRICAL_SURFACE('',#389332,0.150000058649); +#389332 = AXIS2_PLACEMENT_3D('',#389333,#389334,#389335); +#389333 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.51)); +#389334 = DIRECTION('',(0.,0.,-1.)); +#389335 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#389336 = ADVANCED_FACE('',(#389337),#389353,.T.); +#389337 = FACE_BOUND('',#389338,.T.); +#389338 = EDGE_LOOP('',(#389339,#389340,#389346,#389347)); +#389339 = ORIENTED_EDGE('',*,*,#389317,.T.); +#389340 = ORIENTED_EDGE('',*,*,#389341,.T.); +#389341 = EDGE_CURVE('',#389309,#389109,#389342,.T.); +#389342 = LINE('',#389343,#389344); +#389343 = CARTESIAN_POINT('',(133.95,-153.63,1.55)); +#389344 = VECTOR('',#389345,1.); +#389345 = DIRECTION('',(0.,1.,0.)); +#389346 = ORIENTED_EDGE('',*,*,#389106,.F.); +#389347 = ORIENTED_EDGE('',*,*,#389348,.F.); +#389348 = EDGE_CURVE('',#389318,#389107,#389349,.T.); +#389349 = LINE('',#389350,#389351); +#389350 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#389351 = VECTOR('',#389352,1.); +#389352 = DIRECTION('',(0.,1.,0.)); +#389353 = PLANE('',#389354); +#389354 = AXIS2_PLACEMENT_3D('',#389355,#389356,#389357); +#389355 = CARTESIAN_POINT('',(133.95,-153.63,1.51)); +#389356 = DIRECTION('',(-1.,0.,0.)); +#389357 = DIRECTION('',(0.,1.,0.)); +#389358 = ADVANCED_FACE('',(#389359),#389369,.F.); +#389359 = FACE_BOUND('',#389360,.T.); +#389360 = EDGE_LOOP('',(#389361,#389362,#389363,#389364,#389365,#389366, + #389367,#389368)); +#389361 = ORIENTED_EDGE('',*,*,#389133,.T.); +#389362 = ORIENTED_EDGE('',*,*,#389165,.T.); +#389363 = ORIENTED_EDGE('',*,*,#389197,.T.); +#389364 = ORIENTED_EDGE('',*,*,#389229,.T.); +#389365 = ORIENTED_EDGE('',*,*,#389261,.T.); +#389366 = ORIENTED_EDGE('',*,*,#389293,.T.); +#389367 = ORIENTED_EDGE('',*,*,#389325,.T.); +#389368 = ORIENTED_EDGE('',*,*,#389348,.T.); +#389369 = PLANE('',#389370); +#389370 = AXIS2_PLACEMENT_3D('',#389371,#389372,#389373); +#389371 = CARTESIAN_POINT('',(0.,0.,1.51)); +#389372 = DIRECTION('',(0.,0.,1.)); +#389373 = DIRECTION('',(1.,0.,-0.)); +#389374 = ADVANCED_FACE('',(#389375),#389385,.T.); +#389375 = FACE_BOUND('',#389376,.F.); +#389376 = EDGE_LOOP('',(#389377,#389378,#389379,#389380,#389381,#389382, + #389383,#389384)); +#389377 = ORIENTED_EDGE('',*,*,#389116,.T.); +#389378 = ORIENTED_EDGE('',*,*,#389149,.T.); +#389379 = ORIENTED_EDGE('',*,*,#389180,.T.); +#389380 = ORIENTED_EDGE('',*,*,#389213,.T.); +#389381 = ORIENTED_EDGE('',*,*,#389244,.T.); +#389382 = ORIENTED_EDGE('',*,*,#389277,.T.); +#389383 = ORIENTED_EDGE('',*,*,#389308,.T.); +#389384 = ORIENTED_EDGE('',*,*,#389341,.T.); +#389385 = PLANE('',#389386); +#389386 = AXIS2_PLACEMENT_3D('',#389387,#389388,#389389); +#389387 = CARTESIAN_POINT('',(0.,0.,1.55)); +#389388 = DIRECTION('',(0.,0.,1.)); +#389389 = DIRECTION('',(1.,0.,-0.)); +#389390 = MANIFOLD_SOLID_BREP('',#389391); +#389391 = CLOSED_SHELL('',(#389392,#389434,#389465,#389496,#389550, + #389604,#389616,#389638,#389655,#389672)); +#389392 = ADVANCED_FACE('',(#389393),#389429,.T.); +#389393 = FACE_BOUND('',#389394,.T.); +#389394 = EDGE_LOOP('',(#389395,#389405,#389414,#389422)); +#389395 = ORIENTED_EDGE('',*,*,#389396,.T.); +#389396 = EDGE_CURVE('',#389397,#389399,#389401,.T.); +#389397 = VERTEX_POINT('',#389398); +#389398 = CARTESIAN_POINT('',(133.68,-154.52,1.51)); +#389399 = VERTEX_POINT('',#389400); +#389400 = CARTESIAN_POINT('',(133.68,-154.52,1.55)); +#389401 = LINE('',#389402,#389403); +#389402 = CARTESIAN_POINT('',(133.68,-154.52,1.51)); +#389403 = VECTOR('',#389404,1.); +#389404 = DIRECTION('',(0.,0.,1.)); +#389405 = ORIENTED_EDGE('',*,*,#389406,.T.); +#389406 = EDGE_CURVE('',#389399,#389407,#389409,.T.); +#389407 = VERTEX_POINT('',#389408); +#389408 = CARTESIAN_POINT('',(132.68,-154.52,1.55)); +#389409 = CIRCLE('',#389410,0.5); +#389410 = AXIS2_PLACEMENT_3D('',#389411,#389412,#389413); +#389411 = CARTESIAN_POINT('',(133.18,-154.5199995566,1.55)); +#389412 = DIRECTION('',(-0.,0.,-1.)); +#389413 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389414 = ORIENTED_EDGE('',*,*,#389415,.F.); +#389415 = EDGE_CURVE('',#389416,#389407,#389418,.T.); +#389416 = VERTEX_POINT('',#389417); +#389417 = CARTESIAN_POINT('',(132.68,-154.52,1.51)); +#389418 = LINE('',#389419,#389420); +#389419 = CARTESIAN_POINT('',(132.68,-154.52,1.51)); +#389420 = VECTOR('',#389421,1.); +#389421 = DIRECTION('',(0.,0.,1.)); +#389422 = ORIENTED_EDGE('',*,*,#389423,.F.); +#389423 = EDGE_CURVE('',#389397,#389416,#389424,.T.); +#389424 = CIRCLE('',#389425,0.5); +#389425 = AXIS2_PLACEMENT_3D('',#389426,#389427,#389428); +#389426 = CARTESIAN_POINT('',(133.18,-154.5199995566,1.51)); +#389427 = DIRECTION('',(-0.,0.,-1.)); +#389428 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389429 = CYLINDRICAL_SURFACE('',#389430,0.5); +#389430 = AXIS2_PLACEMENT_3D('',#389431,#389432,#389433); +#389431 = CARTESIAN_POINT('',(133.18,-154.5199995566,1.51)); +#389432 = DIRECTION('',(-0.,0.,-1.)); +#389433 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389434 = ADVANCED_FACE('',(#389435),#389460,.T.); +#389435 = FACE_BOUND('',#389436,.T.); +#389436 = EDGE_LOOP('',(#389437,#389447,#389453,#389454)); +#389437 = ORIENTED_EDGE('',*,*,#389438,.T.); +#389438 = EDGE_CURVE('',#389439,#389441,#389443,.T.); +#389439 = VERTEX_POINT('',#389440); +#389440 = CARTESIAN_POINT('',(133.68,-153.42,1.51)); +#389441 = VERTEX_POINT('',#389442); +#389442 = CARTESIAN_POINT('',(133.68,-153.42,1.55)); +#389443 = LINE('',#389444,#389445); +#389444 = CARTESIAN_POINT('',(133.68,-153.42,1.51)); +#389445 = VECTOR('',#389446,1.); +#389446 = DIRECTION('',(0.,0.,1.)); +#389447 = ORIENTED_EDGE('',*,*,#389448,.T.); +#389448 = EDGE_CURVE('',#389441,#389399,#389449,.T.); +#389449 = LINE('',#389450,#389451); +#389450 = CARTESIAN_POINT('',(133.68,-153.42,1.55)); +#389451 = VECTOR('',#389452,1.); +#389452 = DIRECTION('',(0.,-1.,0.)); +#389453 = ORIENTED_EDGE('',*,*,#389396,.F.); +#389454 = ORIENTED_EDGE('',*,*,#389455,.F.); +#389455 = EDGE_CURVE('',#389439,#389397,#389456,.T.); +#389456 = LINE('',#389457,#389458); +#389457 = CARTESIAN_POINT('',(133.68,-153.42,1.51)); +#389458 = VECTOR('',#389459,1.); +#389459 = DIRECTION('',(0.,-1.,0.)); +#389460 = PLANE('',#389461); +#389461 = AXIS2_PLACEMENT_3D('',#389462,#389463,#389464); +#389462 = CARTESIAN_POINT('',(133.68,-153.42,1.51)); +#389463 = DIRECTION('',(1.,0.,-0.)); +#389464 = DIRECTION('',(0.,-1.,0.)); +#389465 = ADVANCED_FACE('',(#389466),#389491,.T.); +#389466 = FACE_BOUND('',#389467,.T.); +#389467 = EDGE_LOOP('',(#389468,#389469,#389477,#389485)); +#389468 = ORIENTED_EDGE('',*,*,#389415,.T.); +#389469 = ORIENTED_EDGE('',*,*,#389470,.T.); +#389470 = EDGE_CURVE('',#389407,#389471,#389473,.T.); +#389471 = VERTEX_POINT('',#389472); +#389472 = CARTESIAN_POINT('',(132.68,-153.42,1.55)); +#389473 = LINE('',#389474,#389475); +#389474 = CARTESIAN_POINT('',(132.68,-154.52,1.55)); +#389475 = VECTOR('',#389476,1.); +#389476 = DIRECTION('',(0.,1.,0.)); +#389477 = ORIENTED_EDGE('',*,*,#389478,.F.); +#389478 = EDGE_CURVE('',#389479,#389471,#389481,.T.); +#389479 = VERTEX_POINT('',#389480); +#389480 = CARTESIAN_POINT('',(132.68,-153.42,1.51)); +#389481 = LINE('',#389482,#389483); +#389482 = CARTESIAN_POINT('',(132.68,-153.42,1.51)); +#389483 = VECTOR('',#389484,1.); +#389484 = DIRECTION('',(0.,0.,1.)); +#389485 = ORIENTED_EDGE('',*,*,#389486,.F.); +#389486 = EDGE_CURVE('',#389416,#389479,#389487,.T.); +#389487 = LINE('',#389488,#389489); +#389488 = CARTESIAN_POINT('',(132.68,-154.52,1.51)); +#389489 = VECTOR('',#389490,1.); +#389490 = DIRECTION('',(0.,1.,0.)); +#389491 = PLANE('',#389492); +#389492 = AXIS2_PLACEMENT_3D('',#389493,#389494,#389495); +#389493 = CARTESIAN_POINT('',(132.68,-154.52,1.51)); +#389494 = DIRECTION('',(-1.,0.,0.)); +#389495 = DIRECTION('',(0.,1.,0.)); +#389496 = ADVANCED_FACE('',(#389497,#389509),#389545,.F.); +#389497 = FACE_BOUND('',#389498,.F.); +#389498 = EDGE_LOOP('',(#389499,#389500,#389501,#389508)); +#389499 = ORIENTED_EDGE('',*,*,#389423,.F.); +#389500 = ORIENTED_EDGE('',*,*,#389455,.F.); +#389501 = ORIENTED_EDGE('',*,*,#389502,.F.); +#389502 = EDGE_CURVE('',#389479,#389439,#389503,.T.); +#389503 = CIRCLE('',#389504,0.500000000001); +#389504 = AXIS2_PLACEMENT_3D('',#389505,#389506,#389507); +#389505 = CARTESIAN_POINT('',(133.18,-153.4199991518,1.51)); +#389506 = DIRECTION('',(0.,0.,-1.)); +#389507 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389508 = ORIENTED_EDGE('',*,*,#389486,.F.); +#389509 = FACE_BOUND('',#389510,.F.); +#389510 = EDGE_LOOP('',(#389511,#389522,#389530,#389539)); +#389511 = ORIENTED_EDGE('',*,*,#389512,.T.); +#389512 = EDGE_CURVE('',#389513,#389515,#389517,.T.); +#389513 = VERTEX_POINT('',#389514); +#389514 = CARTESIAN_POINT('',(133.455,-154.52,1.51)); +#389515 = VERTEX_POINT('',#389516); +#389516 = CARTESIAN_POINT('',(132.905,-154.52,1.51)); +#389517 = CIRCLE('',#389518,0.275); +#389518 = AXIS2_PLACEMENT_3D('',#389519,#389520,#389521); +#389519 = CARTESIAN_POINT('',(133.18,-154.52,1.51)); +#389520 = DIRECTION('',(-0.,0.,-1.)); +#389521 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389522 = ORIENTED_EDGE('',*,*,#389523,.T.); +#389523 = EDGE_CURVE('',#389515,#389524,#389526,.T.); +#389524 = VERTEX_POINT('',#389525); +#389525 = CARTESIAN_POINT('',(132.905,-153.42,1.51)); +#389526 = LINE('',#389527,#389528); +#389527 = CARTESIAN_POINT('',(132.905,-76.71,1.51)); +#389528 = VECTOR('',#389529,1.); +#389529 = DIRECTION('',(-0.,1.,0.)); +#389530 = ORIENTED_EDGE('',*,*,#389531,.T.); +#389531 = EDGE_CURVE('',#389524,#389532,#389534,.T.); +#389532 = VERTEX_POINT('',#389533); +#389533 = CARTESIAN_POINT('',(133.455,-153.42,1.51)); +#389534 = CIRCLE('',#389535,0.275); +#389535 = AXIS2_PLACEMENT_3D('',#389536,#389537,#389538); +#389536 = CARTESIAN_POINT('',(133.18,-153.42,1.51)); +#389537 = DIRECTION('',(0.,-0.,-1.)); +#389538 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389539 = ORIENTED_EDGE('',*,*,#389540,.T.); +#389540 = EDGE_CURVE('',#389532,#389513,#389541,.T.); +#389541 = LINE('',#389542,#389543); +#389542 = CARTESIAN_POINT('',(133.455,-77.26,1.51)); +#389543 = VECTOR('',#389544,1.); +#389544 = DIRECTION('',(0.,-1.,0.)); +#389545 = PLANE('',#389546); +#389546 = AXIS2_PLACEMENT_3D('',#389547,#389548,#389549); +#389547 = CARTESIAN_POINT('',(0.,0.,1.51)); +#389548 = DIRECTION('',(0.,0.,1.)); +#389549 = DIRECTION('',(1.,0.,-0.)); +#389550 = ADVANCED_FACE('',(#389551,#389563),#389599,.T.); +#389551 = FACE_BOUND('',#389552,.T.); +#389552 = EDGE_LOOP('',(#389553,#389554,#389555,#389562)); +#389553 = ORIENTED_EDGE('',*,*,#389406,.F.); +#389554 = ORIENTED_EDGE('',*,*,#389448,.F.); +#389555 = ORIENTED_EDGE('',*,*,#389556,.F.); +#389556 = EDGE_CURVE('',#389471,#389441,#389557,.T.); +#389557 = CIRCLE('',#389558,0.500000000001); +#389558 = AXIS2_PLACEMENT_3D('',#389559,#389560,#389561); +#389559 = CARTESIAN_POINT('',(133.18,-153.4199991518,1.55)); +#389560 = DIRECTION('',(0.,0.,-1.)); +#389561 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389562 = ORIENTED_EDGE('',*,*,#389470,.F.); +#389563 = FACE_BOUND('',#389564,.T.); +#389564 = EDGE_LOOP('',(#389565,#389576,#389584,#389593)); +#389565 = ORIENTED_EDGE('',*,*,#389566,.T.); +#389566 = EDGE_CURVE('',#389567,#389569,#389571,.T.); +#389567 = VERTEX_POINT('',#389568); +#389568 = CARTESIAN_POINT('',(133.455,-154.52,1.55)); +#389569 = VERTEX_POINT('',#389570); +#389570 = CARTESIAN_POINT('',(132.905,-154.52,1.55)); +#389571 = CIRCLE('',#389572,0.275); +#389572 = AXIS2_PLACEMENT_3D('',#389573,#389574,#389575); +#389573 = CARTESIAN_POINT('',(133.18,-154.52,1.55)); +#389574 = DIRECTION('',(-0.,0.,-1.)); +#389575 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389576 = ORIENTED_EDGE('',*,*,#389577,.T.); +#389577 = EDGE_CURVE('',#389569,#389578,#389580,.T.); +#389578 = VERTEX_POINT('',#389579); +#389579 = CARTESIAN_POINT('',(132.905,-153.42,1.55)); +#389580 = LINE('',#389581,#389582); +#389581 = CARTESIAN_POINT('',(132.905,-76.71,1.55)); +#389582 = VECTOR('',#389583,1.); +#389583 = DIRECTION('',(-0.,1.,0.)); +#389584 = ORIENTED_EDGE('',*,*,#389585,.T.); +#389585 = EDGE_CURVE('',#389578,#389586,#389588,.T.); +#389586 = VERTEX_POINT('',#389587); +#389587 = CARTESIAN_POINT('',(133.455,-153.42,1.55)); +#389588 = CIRCLE('',#389589,0.275); +#389589 = AXIS2_PLACEMENT_3D('',#389590,#389591,#389592); +#389590 = CARTESIAN_POINT('',(133.18,-153.42,1.55)); +#389591 = DIRECTION('',(0.,-0.,-1.)); +#389592 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389593 = ORIENTED_EDGE('',*,*,#389594,.T.); +#389594 = EDGE_CURVE('',#389586,#389567,#389595,.T.); +#389595 = LINE('',#389596,#389597); +#389596 = CARTESIAN_POINT('',(133.455,-77.26,1.55)); +#389597 = VECTOR('',#389598,1.); +#389598 = DIRECTION('',(0.,-1.,0.)); +#389599 = PLANE('',#389600); +#389600 = AXIS2_PLACEMENT_3D('',#389601,#389602,#389603); +#389601 = CARTESIAN_POINT('',(0.,0.,1.55)); +#389602 = DIRECTION('',(0.,0.,1.)); +#389603 = DIRECTION('',(1.,0.,-0.)); +#389604 = ADVANCED_FACE('',(#389605),#389611,.T.); +#389605 = FACE_BOUND('',#389606,.T.); +#389606 = EDGE_LOOP('',(#389607,#389608,#389609,#389610)); +#389607 = ORIENTED_EDGE('',*,*,#389478,.T.); +#389608 = ORIENTED_EDGE('',*,*,#389556,.T.); +#389609 = ORIENTED_EDGE('',*,*,#389438,.F.); +#389610 = ORIENTED_EDGE('',*,*,#389502,.F.); +#389611 = CYLINDRICAL_SURFACE('',#389612,0.500000000001); +#389612 = AXIS2_PLACEMENT_3D('',#389613,#389614,#389615); +#389613 = CARTESIAN_POINT('',(133.18,-153.4199991518,1.51)); +#389614 = DIRECTION('',(0.,0.,-1.)); +#389615 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389616 = ADVANCED_FACE('',(#389617),#389633,.F.); +#389617 = FACE_BOUND('',#389618,.T.); +#389618 = EDGE_LOOP('',(#389619,#389620,#389626,#389627)); +#389619 = ORIENTED_EDGE('',*,*,#389512,.T.); +#389620 = ORIENTED_EDGE('',*,*,#389621,.T.); +#389621 = EDGE_CURVE('',#389515,#389569,#389622,.T.); +#389622 = LINE('',#389623,#389624); +#389623 = CARTESIAN_POINT('',(132.905,-154.52,-4.6E-02)); +#389624 = VECTOR('',#389625,1.); +#389625 = DIRECTION('',(0.,0.,1.)); +#389626 = ORIENTED_EDGE('',*,*,#389566,.F.); +#389627 = ORIENTED_EDGE('',*,*,#389628,.F.); +#389628 = EDGE_CURVE('',#389513,#389567,#389629,.T.); +#389629 = LINE('',#389630,#389631); +#389630 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#389631 = VECTOR('',#389632,1.); +#389632 = DIRECTION('',(0.,0.,1.)); +#389633 = CYLINDRICAL_SURFACE('',#389634,0.275); +#389634 = AXIS2_PLACEMENT_3D('',#389635,#389636,#389637); +#389635 = CARTESIAN_POINT('',(133.18,-154.52,-4.6E-02)); +#389636 = DIRECTION('',(-0.,-0.,-1.)); +#389637 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389638 = ADVANCED_FACE('',(#389639),#389650,.T.); +#389639 = FACE_BOUND('',#389640,.T.); +#389640 = EDGE_LOOP('',(#389641,#389642,#389643,#389644)); +#389641 = ORIENTED_EDGE('',*,*,#389540,.T.); +#389642 = ORIENTED_EDGE('',*,*,#389628,.T.); +#389643 = ORIENTED_EDGE('',*,*,#389594,.F.); +#389644 = ORIENTED_EDGE('',*,*,#389645,.F.); +#389645 = EDGE_CURVE('',#389532,#389586,#389646,.T.); +#389646 = LINE('',#389647,#389648); +#389647 = CARTESIAN_POINT('',(133.455,-153.42,-4.6E-02)); +#389648 = VECTOR('',#389649,1.); +#389649 = DIRECTION('',(0.,0.,1.)); +#389650 = PLANE('',#389651); +#389651 = AXIS2_PLACEMENT_3D('',#389652,#389653,#389654); +#389652 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#389653 = DIRECTION('',(-1.,0.,0.)); +#389654 = DIRECTION('',(0.,1.,0.)); +#389655 = ADVANCED_FACE('',(#389656),#389667,.F.); +#389656 = FACE_BOUND('',#389657,.T.); +#389657 = EDGE_LOOP('',(#389658,#389659,#389660,#389661)); +#389658 = ORIENTED_EDGE('',*,*,#389531,.T.); +#389659 = ORIENTED_EDGE('',*,*,#389645,.T.); +#389660 = ORIENTED_EDGE('',*,*,#389585,.F.); +#389661 = ORIENTED_EDGE('',*,*,#389662,.F.); +#389662 = EDGE_CURVE('',#389524,#389578,#389663,.T.); +#389663 = LINE('',#389664,#389665); +#389664 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#389665 = VECTOR('',#389666,1.); +#389666 = DIRECTION('',(0.,0.,1.)); +#389667 = CYLINDRICAL_SURFACE('',#389668,0.275); +#389668 = AXIS2_PLACEMENT_3D('',#389669,#389670,#389671); +#389669 = CARTESIAN_POINT('',(133.18,-153.42,-4.6E-02)); +#389670 = DIRECTION('',(-0.,-0.,-1.)); +#389671 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389672 = ADVANCED_FACE('',(#389673),#389679,.T.); +#389673 = FACE_BOUND('',#389674,.T.); +#389674 = EDGE_LOOP('',(#389675,#389676,#389677,#389678)); +#389675 = ORIENTED_EDGE('',*,*,#389523,.T.); +#389676 = ORIENTED_EDGE('',*,*,#389662,.T.); +#389677 = ORIENTED_EDGE('',*,*,#389577,.F.); +#389678 = ORIENTED_EDGE('',*,*,#389621,.F.); +#389679 = PLANE('',#389680); +#389680 = AXIS2_PLACEMENT_3D('',#389681,#389682,#389683); +#389681 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#389682 = DIRECTION('',(1.,0.,-0.)); +#389683 = DIRECTION('',(0.,-1.,0.)); +#389684 = MANIFOLD_SOLID_BREP('',#389685); +#389685 = CLOSED_SHELL('',(#389686,#389728,#389759,#389790,#389844, + #389898,#389910,#389932,#389949,#389966)); +#389686 = ADVANCED_FACE('',(#389687),#389723,.T.); +#389687 = FACE_BOUND('',#389688,.F.); +#389688 = EDGE_LOOP('',(#389689,#389699,#389708,#389716)); +#389689 = ORIENTED_EDGE('',*,*,#389690,.T.); +#389690 = EDGE_CURVE('',#389691,#389693,#389695,.T.); +#389691 = VERTEX_POINT('',#389692); +#389692 = CARTESIAN_POINT('',(133.68,-154.52,0.)); +#389693 = VERTEX_POINT('',#389694); +#389694 = CARTESIAN_POINT('',(133.68,-154.52,-4.E-02)); +#389695 = LINE('',#389696,#389697); +#389696 = CARTESIAN_POINT('',(133.68,-154.52,0.)); +#389697 = VECTOR('',#389698,1.); +#389698 = DIRECTION('',(0.,0.,-1.)); +#389699 = ORIENTED_EDGE('',*,*,#389700,.T.); +#389700 = EDGE_CURVE('',#389693,#389701,#389703,.T.); +#389701 = VERTEX_POINT('',#389702); +#389702 = CARTESIAN_POINT('',(132.68,-154.52,-4.E-02)); +#389703 = CIRCLE('',#389704,0.5); +#389704 = AXIS2_PLACEMENT_3D('',#389705,#389706,#389707); +#389705 = CARTESIAN_POINT('',(133.18,-154.5199995566,-4.E-02)); +#389706 = DIRECTION('',(-0.,0.,-1.)); +#389707 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389708 = ORIENTED_EDGE('',*,*,#389709,.F.); +#389709 = EDGE_CURVE('',#389710,#389701,#389712,.T.); +#389710 = VERTEX_POINT('',#389711); +#389711 = CARTESIAN_POINT('',(132.68,-154.52,0.)); +#389712 = LINE('',#389713,#389714); +#389713 = CARTESIAN_POINT('',(132.68,-154.52,0.)); +#389714 = VECTOR('',#389715,1.); +#389715 = DIRECTION('',(0.,0.,-1.)); +#389716 = ORIENTED_EDGE('',*,*,#389717,.F.); +#389717 = EDGE_CURVE('',#389691,#389710,#389718,.T.); +#389718 = CIRCLE('',#389719,0.5); +#389719 = AXIS2_PLACEMENT_3D('',#389720,#389721,#389722); +#389720 = CARTESIAN_POINT('',(133.18,-154.5199995566,0.)); +#389721 = DIRECTION('',(-0.,0.,-1.)); +#389722 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389723 = CYLINDRICAL_SURFACE('',#389724,0.5); +#389724 = AXIS2_PLACEMENT_3D('',#389725,#389726,#389727); +#389725 = CARTESIAN_POINT('',(133.18,-154.5199995566,0.)); +#389726 = DIRECTION('',(0.,-0.,1.)); +#389727 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#389728 = ADVANCED_FACE('',(#389729),#389754,.F.); +#389729 = FACE_BOUND('',#389730,.F.); +#389730 = EDGE_LOOP('',(#389731,#389741,#389747,#389748)); +#389731 = ORIENTED_EDGE('',*,*,#389732,.T.); +#389732 = EDGE_CURVE('',#389733,#389735,#389737,.T.); +#389733 = VERTEX_POINT('',#389734); +#389734 = CARTESIAN_POINT('',(133.68,-153.42,0.)); +#389735 = VERTEX_POINT('',#389736); +#389736 = CARTESIAN_POINT('',(133.68,-153.42,-4.E-02)); +#389737 = LINE('',#389738,#389739); +#389738 = CARTESIAN_POINT('',(133.68,-153.42,0.)); +#389739 = VECTOR('',#389740,1.); +#389740 = DIRECTION('',(0.,0.,-1.)); +#389741 = ORIENTED_EDGE('',*,*,#389742,.T.); +#389742 = EDGE_CURVE('',#389735,#389693,#389743,.T.); +#389743 = LINE('',#389744,#389745); +#389744 = CARTESIAN_POINT('',(133.68,-153.42,-4.E-02)); +#389745 = VECTOR('',#389746,1.); +#389746 = DIRECTION('',(0.,-1.,0.)); +#389747 = ORIENTED_EDGE('',*,*,#389690,.F.); +#389748 = ORIENTED_EDGE('',*,*,#389749,.F.); +#389749 = EDGE_CURVE('',#389733,#389691,#389750,.T.); +#389750 = LINE('',#389751,#389752); +#389751 = CARTESIAN_POINT('',(133.68,-153.42,0.)); +#389752 = VECTOR('',#389753,1.); +#389753 = DIRECTION('',(0.,-1.,0.)); +#389754 = PLANE('',#389755); +#389755 = AXIS2_PLACEMENT_3D('',#389756,#389757,#389758); +#389756 = CARTESIAN_POINT('',(133.68,-153.42,0.)); +#389757 = DIRECTION('',(-1.,-0.,-0.)); +#389758 = DIRECTION('',(0.,-1.,0.)); +#389759 = ADVANCED_FACE('',(#389760),#389785,.F.); +#389760 = FACE_BOUND('',#389761,.F.); +#389761 = EDGE_LOOP('',(#389762,#389763,#389771,#389779)); +#389762 = ORIENTED_EDGE('',*,*,#389709,.T.); +#389763 = ORIENTED_EDGE('',*,*,#389764,.T.); +#389764 = EDGE_CURVE('',#389701,#389765,#389767,.T.); +#389765 = VERTEX_POINT('',#389766); +#389766 = CARTESIAN_POINT('',(132.68,-153.42,-4.E-02)); +#389767 = LINE('',#389768,#389769); +#389768 = CARTESIAN_POINT('',(132.68,-154.52,-4.E-02)); +#389769 = VECTOR('',#389770,1.); +#389770 = DIRECTION('',(0.,1.,0.)); +#389771 = ORIENTED_EDGE('',*,*,#389772,.F.); +#389772 = EDGE_CURVE('',#389773,#389765,#389775,.T.); +#389773 = VERTEX_POINT('',#389774); +#389774 = CARTESIAN_POINT('',(132.68,-153.42,0.)); +#389775 = LINE('',#389776,#389777); +#389776 = CARTESIAN_POINT('',(132.68,-153.42,0.)); +#389777 = VECTOR('',#389778,1.); +#389778 = DIRECTION('',(0.,0.,-1.)); +#389779 = ORIENTED_EDGE('',*,*,#389780,.F.); +#389780 = EDGE_CURVE('',#389710,#389773,#389781,.T.); +#389781 = LINE('',#389782,#389783); +#389782 = CARTESIAN_POINT('',(132.68,-154.52,0.)); +#389783 = VECTOR('',#389784,1.); +#389784 = DIRECTION('',(0.,1.,0.)); +#389785 = PLANE('',#389786); +#389786 = AXIS2_PLACEMENT_3D('',#389787,#389788,#389789); +#389787 = CARTESIAN_POINT('',(132.68,-154.52,0.)); +#389788 = DIRECTION('',(1.,-0.,0.)); +#389789 = DIRECTION('',(0.,1.,0.)); +#389790 = ADVANCED_FACE('',(#389791,#389803),#389839,.F.); +#389791 = FACE_BOUND('',#389792,.F.); +#389792 = EDGE_LOOP('',(#389793,#389794,#389795,#389802)); +#389793 = ORIENTED_EDGE('',*,*,#389717,.T.); +#389794 = ORIENTED_EDGE('',*,*,#389780,.T.); +#389795 = ORIENTED_EDGE('',*,*,#389796,.T.); +#389796 = EDGE_CURVE('',#389773,#389733,#389797,.T.); +#389797 = CIRCLE('',#389798,0.500000000001); +#389798 = AXIS2_PLACEMENT_3D('',#389799,#389800,#389801); +#389799 = CARTESIAN_POINT('',(133.18,-153.4199991518,0.)); +#389800 = DIRECTION('',(0.,0.,-1.)); +#389801 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389802 = ORIENTED_EDGE('',*,*,#389749,.T.); +#389803 = FACE_BOUND('',#389804,.F.); +#389804 = EDGE_LOOP('',(#389805,#389816,#389824,#389833)); +#389805 = ORIENTED_EDGE('',*,*,#389806,.F.); +#389806 = EDGE_CURVE('',#389807,#389809,#389811,.T.); +#389807 = VERTEX_POINT('',#389808); +#389808 = CARTESIAN_POINT('',(132.905,-153.42,0.)); +#389809 = VERTEX_POINT('',#389810); +#389810 = CARTESIAN_POINT('',(133.455,-153.42,0.)); +#389811 = CIRCLE('',#389812,0.275); +#389812 = AXIS2_PLACEMENT_3D('',#389813,#389814,#389815); +#389813 = CARTESIAN_POINT('',(133.18,-153.42,0.)); +#389814 = DIRECTION('',(0.,-0.,-1.)); +#389815 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389816 = ORIENTED_EDGE('',*,*,#389817,.T.); +#389817 = EDGE_CURVE('',#389807,#389818,#389820,.T.); +#389818 = VERTEX_POINT('',#389819); +#389819 = CARTESIAN_POINT('',(132.905,-154.52,0.)); +#389820 = LINE('',#389821,#389822); +#389821 = CARTESIAN_POINT('',(132.905,-76.71,0.)); +#389822 = VECTOR('',#389823,1.); +#389823 = DIRECTION('',(0.,-1.,0.)); +#389824 = ORIENTED_EDGE('',*,*,#389825,.F.); +#389825 = EDGE_CURVE('',#389826,#389818,#389828,.T.); +#389826 = VERTEX_POINT('',#389827); +#389827 = CARTESIAN_POINT('',(133.455,-154.52,0.)); +#389828 = CIRCLE('',#389829,0.275); +#389829 = AXIS2_PLACEMENT_3D('',#389830,#389831,#389832); +#389830 = CARTESIAN_POINT('',(133.18,-154.52,0.)); +#389831 = DIRECTION('',(-0.,0.,-1.)); +#389832 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389833 = ORIENTED_EDGE('',*,*,#389834,.T.); +#389834 = EDGE_CURVE('',#389826,#389809,#389835,.T.); +#389835 = LINE('',#389836,#389837); +#389836 = CARTESIAN_POINT('',(133.455,-77.26,0.)); +#389837 = VECTOR('',#389838,1.); +#389838 = DIRECTION('',(0.,1.,-0.)); +#389839 = PLANE('',#389840); +#389840 = AXIS2_PLACEMENT_3D('',#389841,#389842,#389843); +#389841 = CARTESIAN_POINT('',(0.,0.,0.)); +#389842 = DIRECTION('',(-0.,-0.,-1.)); +#389843 = DIRECTION('',(-1.,0.,0.)); +#389844 = ADVANCED_FACE('',(#389845,#389857),#389893,.T.); +#389845 = FACE_BOUND('',#389846,.T.); +#389846 = EDGE_LOOP('',(#389847,#389848,#389849,#389856)); +#389847 = ORIENTED_EDGE('',*,*,#389700,.T.); +#389848 = ORIENTED_EDGE('',*,*,#389764,.T.); +#389849 = ORIENTED_EDGE('',*,*,#389850,.T.); +#389850 = EDGE_CURVE('',#389765,#389735,#389851,.T.); +#389851 = CIRCLE('',#389852,0.500000000001); +#389852 = AXIS2_PLACEMENT_3D('',#389853,#389854,#389855); +#389853 = CARTESIAN_POINT('',(133.18,-153.4199991518,-4.E-02)); +#389854 = DIRECTION('',(0.,0.,-1.)); +#389855 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389856 = ORIENTED_EDGE('',*,*,#389742,.T.); +#389857 = FACE_BOUND('',#389858,.T.); +#389858 = EDGE_LOOP('',(#389859,#389870,#389878,#389887)); +#389859 = ORIENTED_EDGE('',*,*,#389860,.F.); +#389860 = EDGE_CURVE('',#389861,#389863,#389865,.T.); +#389861 = VERTEX_POINT('',#389862); +#389862 = CARTESIAN_POINT('',(132.905,-153.42,-4.E-02)); +#389863 = VERTEX_POINT('',#389864); +#389864 = CARTESIAN_POINT('',(133.455,-153.42,-4.E-02)); +#389865 = CIRCLE('',#389866,0.275); +#389866 = AXIS2_PLACEMENT_3D('',#389867,#389868,#389869); +#389867 = CARTESIAN_POINT('',(133.18,-153.42,-4.E-02)); +#389868 = DIRECTION('',(0.,-0.,-1.)); +#389869 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389870 = ORIENTED_EDGE('',*,*,#389871,.T.); +#389871 = EDGE_CURVE('',#389861,#389872,#389874,.T.); +#389872 = VERTEX_POINT('',#389873); +#389873 = CARTESIAN_POINT('',(132.905,-154.52,-4.E-02)); +#389874 = LINE('',#389875,#389876); +#389875 = CARTESIAN_POINT('',(132.905,-76.71,-4.E-02)); +#389876 = VECTOR('',#389877,1.); +#389877 = DIRECTION('',(0.,-1.,0.)); +#389878 = ORIENTED_EDGE('',*,*,#389879,.F.); +#389879 = EDGE_CURVE('',#389880,#389872,#389882,.T.); +#389880 = VERTEX_POINT('',#389881); +#389881 = CARTESIAN_POINT('',(133.455,-154.52,-4.E-02)); +#389882 = CIRCLE('',#389883,0.275); +#389883 = AXIS2_PLACEMENT_3D('',#389884,#389885,#389886); +#389884 = CARTESIAN_POINT('',(133.18,-154.52,-4.E-02)); +#389885 = DIRECTION('',(-0.,0.,-1.)); +#389886 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389887 = ORIENTED_EDGE('',*,*,#389888,.T.); +#389888 = EDGE_CURVE('',#389880,#389863,#389889,.T.); +#389889 = LINE('',#389890,#389891); +#389890 = CARTESIAN_POINT('',(133.455,-77.26,-4.E-02)); +#389891 = VECTOR('',#389892,1.); +#389892 = DIRECTION('',(0.,1.,-0.)); +#389893 = PLANE('',#389894); +#389894 = AXIS2_PLACEMENT_3D('',#389895,#389896,#389897); +#389895 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#389896 = DIRECTION('',(-0.,-0.,-1.)); +#389897 = DIRECTION('',(-1.,0.,0.)); +#389898 = ADVANCED_FACE('',(#389899),#389905,.T.); +#389899 = FACE_BOUND('',#389900,.F.); +#389900 = EDGE_LOOP('',(#389901,#389902,#389903,#389904)); +#389901 = ORIENTED_EDGE('',*,*,#389772,.T.); +#389902 = ORIENTED_EDGE('',*,*,#389850,.T.); +#389903 = ORIENTED_EDGE('',*,*,#389732,.F.); +#389904 = ORIENTED_EDGE('',*,*,#389796,.F.); +#389905 = CYLINDRICAL_SURFACE('',#389906,0.500000000001); +#389906 = AXIS2_PLACEMENT_3D('',#389907,#389908,#389909); +#389907 = CARTESIAN_POINT('',(133.18,-153.4199991518,0.)); +#389908 = DIRECTION('',(-0.,-0.,1.)); +#389909 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#389910 = ADVANCED_FACE('',(#389911),#389927,.F.); +#389911 = FACE_BOUND('',#389912,.T.); +#389912 = EDGE_LOOP('',(#389913,#389914,#389920,#389921)); +#389913 = ORIENTED_EDGE('',*,*,#389860,.T.); +#389914 = ORIENTED_EDGE('',*,*,#389915,.T.); +#389915 = EDGE_CURVE('',#389863,#389809,#389916,.T.); +#389916 = LINE('',#389917,#389918); +#389917 = CARTESIAN_POINT('',(133.455,-153.42,-4.6E-02)); +#389918 = VECTOR('',#389919,1.); +#389919 = DIRECTION('',(0.,0.,1.)); +#389920 = ORIENTED_EDGE('',*,*,#389806,.F.); +#389921 = ORIENTED_EDGE('',*,*,#389922,.F.); +#389922 = EDGE_CURVE('',#389861,#389807,#389923,.T.); +#389923 = LINE('',#389924,#389925); +#389924 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#389925 = VECTOR('',#389926,1.); +#389926 = DIRECTION('',(0.,0.,1.)); +#389927 = CYLINDRICAL_SURFACE('',#389928,0.275); +#389928 = AXIS2_PLACEMENT_3D('',#389929,#389930,#389931); +#389929 = CARTESIAN_POINT('',(133.18,-153.42,-4.6E-02)); +#389930 = DIRECTION('',(-0.,-0.,-1.)); +#389931 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#389932 = ADVANCED_FACE('',(#389933),#389944,.T.); +#389933 = FACE_BOUND('',#389934,.T.); +#389934 = EDGE_LOOP('',(#389935,#389936,#389942,#389943)); +#389935 = ORIENTED_EDGE('',*,*,#389888,.F.); +#389936 = ORIENTED_EDGE('',*,*,#389937,.T.); +#389937 = EDGE_CURVE('',#389880,#389826,#389938,.T.); +#389938 = LINE('',#389939,#389940); +#389939 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#389940 = VECTOR('',#389941,1.); +#389941 = DIRECTION('',(0.,0.,1.)); +#389942 = ORIENTED_EDGE('',*,*,#389834,.T.); +#389943 = ORIENTED_EDGE('',*,*,#389915,.F.); +#389944 = PLANE('',#389945); +#389945 = AXIS2_PLACEMENT_3D('',#389946,#389947,#389948); +#389946 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#389947 = DIRECTION('',(-1.,0.,0.)); +#389948 = DIRECTION('',(0.,1.,0.)); +#389949 = ADVANCED_FACE('',(#389950),#389961,.F.); +#389950 = FACE_BOUND('',#389951,.T.); +#389951 = EDGE_LOOP('',(#389952,#389953,#389959,#389960)); +#389952 = ORIENTED_EDGE('',*,*,#389879,.T.); +#389953 = ORIENTED_EDGE('',*,*,#389954,.T.); +#389954 = EDGE_CURVE('',#389872,#389818,#389955,.T.); +#389955 = LINE('',#389956,#389957); +#389956 = CARTESIAN_POINT('',(132.905,-154.52,-4.6E-02)); +#389957 = VECTOR('',#389958,1.); +#389958 = DIRECTION('',(0.,0.,1.)); +#389959 = ORIENTED_EDGE('',*,*,#389825,.F.); +#389960 = ORIENTED_EDGE('',*,*,#389937,.F.); +#389961 = CYLINDRICAL_SURFACE('',#389962,0.275); +#389962 = AXIS2_PLACEMENT_3D('',#389963,#389964,#389965); +#389963 = CARTESIAN_POINT('',(133.18,-154.52,-4.6E-02)); +#389964 = DIRECTION('',(-0.,-0.,-1.)); +#389965 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#389966 = ADVANCED_FACE('',(#389967),#389973,.T.); +#389967 = FACE_BOUND('',#389968,.T.); +#389968 = EDGE_LOOP('',(#389969,#389970,#389971,#389972)); +#389969 = ORIENTED_EDGE('',*,*,#389871,.F.); +#389970 = ORIENTED_EDGE('',*,*,#389922,.T.); +#389971 = ORIENTED_EDGE('',*,*,#389817,.T.); +#389972 = ORIENTED_EDGE('',*,*,#389954,.F.); +#389973 = PLANE('',#389974); +#389974 = AXIS2_PLACEMENT_3D('',#389975,#389976,#389977); +#389975 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#389976 = DIRECTION('',(1.,0.,-0.)); +#389977 = DIRECTION('',(0.,-1.,0.)); +#389978 = MANIFOLD_SOLID_BREP('',#389979); +#389979 = CLOSED_SHELL('',(#389980,#390020,#390053,#390086,#390139, + #390192,#390204,#390226,#390243,#390260)); +#389980 = ADVANCED_FACE('',(#389981),#390015,.F.); +#389981 = FACE_BOUND('',#389982,.F.); +#389982 = EDGE_LOOP('',(#389983,#389993,#390001,#390009)); +#389983 = ORIENTED_EDGE('',*,*,#389984,.T.); +#389984 = EDGE_CURVE('',#389985,#389987,#389989,.T.); +#389985 = VERTEX_POINT('',#389986); +#389986 = CARTESIAN_POINT('',(132.88,-153.42,-4.E-02)); +#389987 = VERTEX_POINT('',#389988); +#389988 = CARTESIAN_POINT('',(132.88,-153.42,1.55)); +#389989 = LINE('',#389990,#389991); +#389990 = CARTESIAN_POINT('',(132.88,-153.42,-4.E-02)); +#389991 = VECTOR('',#389992,1.); +#389992 = DIRECTION('',(0.,0.,1.)); +#389993 = ORIENTED_EDGE('',*,*,#389994,.T.); +#389994 = EDGE_CURVE('',#389987,#389995,#389997,.T.); +#389995 = VERTEX_POINT('',#389996); +#389996 = CARTESIAN_POINT('',(132.88,-154.52,1.55)); +#389997 = LINE('',#389998,#389999); +#389998 = CARTESIAN_POINT('',(132.88,-153.42,1.55)); +#389999 = VECTOR('',#390000,1.); +#390000 = DIRECTION('',(0.,-1.,0.)); +#390001 = ORIENTED_EDGE('',*,*,#390002,.F.); +#390002 = EDGE_CURVE('',#390003,#389995,#390005,.T.); +#390003 = VERTEX_POINT('',#390004); +#390004 = CARTESIAN_POINT('',(132.88,-154.52,-4.E-02)); +#390005 = LINE('',#390006,#390007); +#390006 = CARTESIAN_POINT('',(132.88,-154.52,-4.E-02)); +#390007 = VECTOR('',#390008,1.); +#390008 = DIRECTION('',(0.,0.,1.)); +#390009 = ORIENTED_EDGE('',*,*,#390010,.F.); +#390010 = EDGE_CURVE('',#389985,#390003,#390011,.T.); +#390011 = LINE('',#390012,#390013); +#390012 = CARTESIAN_POINT('',(132.88,-153.42,-4.E-02)); +#390013 = VECTOR('',#390014,1.); +#390014 = DIRECTION('',(0.,-1.,0.)); +#390015 = PLANE('',#390016); +#390016 = AXIS2_PLACEMENT_3D('',#390017,#390018,#390019); +#390017 = CARTESIAN_POINT('',(132.88,-153.42,-4.E-02)); +#390018 = DIRECTION('',(1.,0.,-0.)); +#390019 = DIRECTION('',(0.,-1.,0.)); +#390020 = ADVANCED_FACE('',(#390021),#390048,.T.); +#390021 = FACE_BOUND('',#390022,.F.); +#390022 = EDGE_LOOP('',(#390023,#390033,#390040,#390041)); +#390023 = ORIENTED_EDGE('',*,*,#390024,.T.); +#390024 = EDGE_CURVE('',#390025,#390027,#390029,.T.); +#390025 = VERTEX_POINT('',#390026); +#390026 = CARTESIAN_POINT('',(133.48,-153.42,-4.E-02)); +#390027 = VERTEX_POINT('',#390028); +#390028 = CARTESIAN_POINT('',(133.48,-153.42,1.55)); +#390029 = LINE('',#390030,#390031); +#390030 = CARTESIAN_POINT('',(133.48,-153.42,-4.E-02)); +#390031 = VECTOR('',#390032,1.); +#390032 = DIRECTION('',(0.,0.,1.)); +#390033 = ORIENTED_EDGE('',*,*,#390034,.T.); +#390034 = EDGE_CURVE('',#390027,#389987,#390035,.T.); +#390035 = CIRCLE('',#390036,0.3); +#390036 = AXIS2_PLACEMENT_3D('',#390037,#390038,#390039); +#390037 = CARTESIAN_POINT('',(133.18,-153.42,1.55)); +#390038 = DIRECTION('',(0.,0.,1.)); +#390039 = DIRECTION('',(1.,0.,-0.)); +#390040 = ORIENTED_EDGE('',*,*,#389984,.F.); +#390041 = ORIENTED_EDGE('',*,*,#390042,.F.); +#390042 = EDGE_CURVE('',#390025,#389985,#390043,.T.); +#390043 = CIRCLE('',#390044,0.3); +#390044 = AXIS2_PLACEMENT_3D('',#390045,#390046,#390047); +#390045 = CARTESIAN_POINT('',(133.18,-153.42,-4.E-02)); +#390046 = DIRECTION('',(0.,0.,1.)); +#390047 = DIRECTION('',(1.,0.,-0.)); +#390048 = CYLINDRICAL_SURFACE('',#390049,0.3); +#390049 = AXIS2_PLACEMENT_3D('',#390050,#390051,#390052); +#390050 = CARTESIAN_POINT('',(133.18,-153.42,-4.E-02)); +#390051 = DIRECTION('',(-0.,-0.,-1.)); +#390052 = DIRECTION('',(1.,0.,-0.)); +#390053 = ADVANCED_FACE('',(#390054),#390081,.T.); +#390054 = FACE_BOUND('',#390055,.F.); +#390055 = EDGE_LOOP('',(#390056,#390057,#390066,#390074)); +#390056 = ORIENTED_EDGE('',*,*,#390002,.T.); +#390057 = ORIENTED_EDGE('',*,*,#390058,.T.); +#390058 = EDGE_CURVE('',#389995,#390059,#390061,.T.); +#390059 = VERTEX_POINT('',#390060); +#390060 = CARTESIAN_POINT('',(133.48,-154.52,1.55)); +#390061 = CIRCLE('',#390062,0.3); +#390062 = AXIS2_PLACEMENT_3D('',#390063,#390064,#390065); +#390063 = CARTESIAN_POINT('',(133.18,-154.52,1.55)); +#390064 = DIRECTION('',(0.,0.,1.)); +#390065 = DIRECTION('',(-1.,0.,-0.)); +#390066 = ORIENTED_EDGE('',*,*,#390067,.F.); +#390067 = EDGE_CURVE('',#390068,#390059,#390070,.T.); +#390068 = VERTEX_POINT('',#390069); +#390069 = CARTESIAN_POINT('',(133.48,-154.52,-4.E-02)); +#390070 = LINE('',#390071,#390072); +#390071 = CARTESIAN_POINT('',(133.48,-154.52,-4.E-02)); +#390072 = VECTOR('',#390073,1.); +#390073 = DIRECTION('',(0.,0.,1.)); +#390074 = ORIENTED_EDGE('',*,*,#390075,.F.); +#390075 = EDGE_CURVE('',#390003,#390068,#390076,.T.); +#390076 = CIRCLE('',#390077,0.3); +#390077 = AXIS2_PLACEMENT_3D('',#390078,#390079,#390080); +#390078 = CARTESIAN_POINT('',(133.18,-154.52,-4.E-02)); +#390079 = DIRECTION('',(0.,0.,1.)); +#390080 = DIRECTION('',(-1.,0.,-0.)); +#390081 = CYLINDRICAL_SURFACE('',#390082,0.3); +#390082 = AXIS2_PLACEMENT_3D('',#390083,#390084,#390085); +#390083 = CARTESIAN_POINT('',(133.18,-154.52,-4.E-02)); +#390084 = DIRECTION('',(-0.,-0.,-1.)); +#390085 = DIRECTION('',(-1.,0.,-0.)); +#390086 = ADVANCED_FACE('',(#390087,#390098),#390134,.F.); +#390087 = FACE_BOUND('',#390088,.F.); +#390088 = EDGE_LOOP('',(#390089,#390090,#390091,#390097)); +#390089 = ORIENTED_EDGE('',*,*,#390010,.T.); +#390090 = ORIENTED_EDGE('',*,*,#390075,.T.); +#390091 = ORIENTED_EDGE('',*,*,#390092,.T.); +#390092 = EDGE_CURVE('',#390068,#390025,#390093,.T.); +#390093 = LINE('',#390094,#390095); +#390094 = CARTESIAN_POINT('',(133.48,-154.52,-4.E-02)); +#390095 = VECTOR('',#390096,1.); +#390096 = DIRECTION('',(0.,1.,0.)); +#390097 = ORIENTED_EDGE('',*,*,#390042,.T.); +#390098 = FACE_BOUND('',#390099,.F.); +#390099 = EDGE_LOOP('',(#390100,#390111,#390119,#390128)); +#390100 = ORIENTED_EDGE('',*,*,#390101,.T.); +#390101 = EDGE_CURVE('',#390102,#390104,#390106,.T.); +#390102 = VERTEX_POINT('',#390103); +#390103 = CARTESIAN_POINT('',(133.455,-154.52,-4.E-02)); +#390104 = VERTEX_POINT('',#390105); +#390105 = CARTESIAN_POINT('',(132.905,-154.52,-4.E-02)); +#390106 = CIRCLE('',#390107,0.275); +#390107 = AXIS2_PLACEMENT_3D('',#390108,#390109,#390110); +#390108 = CARTESIAN_POINT('',(133.18,-154.52,-4.E-02)); +#390109 = DIRECTION('',(-0.,0.,-1.)); +#390110 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#390111 = ORIENTED_EDGE('',*,*,#390112,.T.); +#390112 = EDGE_CURVE('',#390104,#390113,#390115,.T.); +#390113 = VERTEX_POINT('',#390114); +#390114 = CARTESIAN_POINT('',(132.905,-153.42,-4.E-02)); +#390115 = LINE('',#390116,#390117); +#390116 = CARTESIAN_POINT('',(132.905,-153.42,-4.E-02)); +#390117 = VECTOR('',#390118,1.); +#390118 = DIRECTION('',(-0.,1.,0.)); +#390119 = ORIENTED_EDGE('',*,*,#390120,.T.); +#390120 = EDGE_CURVE('',#390113,#390121,#390123,.T.); +#390121 = VERTEX_POINT('',#390122); +#390122 = CARTESIAN_POINT('',(133.455,-153.42,-4.E-02)); +#390123 = CIRCLE('',#390124,0.275); +#390124 = AXIS2_PLACEMENT_3D('',#390125,#390126,#390127); +#390125 = CARTESIAN_POINT('',(133.18,-153.42,-4.E-02)); +#390126 = DIRECTION('',(0.,-0.,-1.)); +#390127 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#390128 = ORIENTED_EDGE('',*,*,#390129,.T.); +#390129 = EDGE_CURVE('',#390121,#390102,#390130,.T.); +#390130 = LINE('',#390131,#390132); +#390131 = CARTESIAN_POINT('',(133.455,-153.97,-4.E-02)); +#390132 = VECTOR('',#390133,1.); +#390133 = DIRECTION('',(0.,-1.,0.)); +#390134 = PLANE('',#390135); +#390135 = AXIS2_PLACEMENT_3D('',#390136,#390137,#390138); +#390136 = CARTESIAN_POINT('',(132.88,-153.42,-4.E-02)); +#390137 = DIRECTION('',(0.,0.,1.)); +#390138 = DIRECTION('',(1.,0.,-0.)); +#390139 = ADVANCED_FACE('',(#390140,#390151),#390187,.T.); +#390140 = FACE_BOUND('',#390141,.T.); +#390141 = EDGE_LOOP('',(#390142,#390143,#390144,#390150)); +#390142 = ORIENTED_EDGE('',*,*,#389994,.T.); +#390143 = ORIENTED_EDGE('',*,*,#390058,.T.); +#390144 = ORIENTED_EDGE('',*,*,#390145,.T.); +#390145 = EDGE_CURVE('',#390059,#390027,#390146,.T.); +#390146 = LINE('',#390147,#390148); +#390147 = CARTESIAN_POINT('',(133.48,-154.52,1.55)); +#390148 = VECTOR('',#390149,1.); +#390149 = DIRECTION('',(0.,1.,0.)); +#390150 = ORIENTED_EDGE('',*,*,#390034,.T.); +#390151 = FACE_BOUND('',#390152,.T.); +#390152 = EDGE_LOOP('',(#390153,#390164,#390172,#390181)); +#390153 = ORIENTED_EDGE('',*,*,#390154,.T.); +#390154 = EDGE_CURVE('',#390155,#390157,#390159,.T.); +#390155 = VERTEX_POINT('',#390156); +#390156 = CARTESIAN_POINT('',(133.455,-154.52,1.55)); +#390157 = VERTEX_POINT('',#390158); +#390158 = CARTESIAN_POINT('',(132.905,-154.52,1.55)); +#390159 = CIRCLE('',#390160,0.275); +#390160 = AXIS2_PLACEMENT_3D('',#390161,#390162,#390163); +#390161 = CARTESIAN_POINT('',(133.18,-154.52,1.55)); +#390162 = DIRECTION('',(-0.,0.,-1.)); +#390163 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#390164 = ORIENTED_EDGE('',*,*,#390165,.T.); +#390165 = EDGE_CURVE('',#390157,#390166,#390168,.T.); +#390166 = VERTEX_POINT('',#390167); +#390167 = CARTESIAN_POINT('',(132.905,-153.42,1.55)); +#390168 = LINE('',#390169,#390170); +#390169 = CARTESIAN_POINT('',(132.905,-153.42,1.55)); +#390170 = VECTOR('',#390171,1.); +#390171 = DIRECTION('',(-0.,1.,0.)); +#390172 = ORIENTED_EDGE('',*,*,#390173,.T.); +#390173 = EDGE_CURVE('',#390166,#390174,#390176,.T.); +#390174 = VERTEX_POINT('',#390175); +#390175 = CARTESIAN_POINT('',(133.455,-153.42,1.55)); +#390176 = CIRCLE('',#390177,0.275); +#390177 = AXIS2_PLACEMENT_3D('',#390178,#390179,#390180); +#390178 = CARTESIAN_POINT('',(133.18,-153.42,1.55)); +#390179 = DIRECTION('',(0.,-0.,-1.)); +#390180 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#390181 = ORIENTED_EDGE('',*,*,#390182,.T.); +#390182 = EDGE_CURVE('',#390174,#390155,#390183,.T.); +#390183 = LINE('',#390184,#390185); +#390184 = CARTESIAN_POINT('',(133.455,-153.97,1.55)); +#390185 = VECTOR('',#390186,1.); +#390186 = DIRECTION('',(0.,-1.,0.)); +#390187 = PLANE('',#390188); +#390188 = AXIS2_PLACEMENT_3D('',#390189,#390190,#390191); +#390189 = CARTESIAN_POINT('',(132.88,-153.42,1.55)); +#390190 = DIRECTION('',(0.,0.,1.)); +#390191 = DIRECTION('',(1.,0.,-0.)); +#390192 = ADVANCED_FACE('',(#390193),#390199,.F.); +#390193 = FACE_BOUND('',#390194,.F.); +#390194 = EDGE_LOOP('',(#390195,#390196,#390197,#390198)); +#390195 = ORIENTED_EDGE('',*,*,#390067,.T.); +#390196 = ORIENTED_EDGE('',*,*,#390145,.T.); +#390197 = ORIENTED_EDGE('',*,*,#390024,.F.); +#390198 = ORIENTED_EDGE('',*,*,#390092,.F.); +#390199 = PLANE('',#390200); +#390200 = AXIS2_PLACEMENT_3D('',#390201,#390202,#390203); +#390201 = CARTESIAN_POINT('',(133.48,-154.52,-4.E-02)); +#390202 = DIRECTION('',(-1.,0.,0.)); +#390203 = DIRECTION('',(0.,1.,0.)); +#390204 = ADVANCED_FACE('',(#390205),#390221,.F.); +#390205 = FACE_BOUND('',#390206,.T.); +#390206 = EDGE_LOOP('',(#390207,#390208,#390214,#390215)); +#390207 = ORIENTED_EDGE('',*,*,#390101,.T.); +#390208 = ORIENTED_EDGE('',*,*,#390209,.T.); +#390209 = EDGE_CURVE('',#390104,#390157,#390210,.T.); +#390210 = LINE('',#390211,#390212); +#390211 = CARTESIAN_POINT('',(132.905,-154.52,-4.6E-02)); +#390212 = VECTOR('',#390213,1.); +#390213 = DIRECTION('',(0.,0.,1.)); +#390214 = ORIENTED_EDGE('',*,*,#390154,.F.); +#390215 = ORIENTED_EDGE('',*,*,#390216,.F.); +#390216 = EDGE_CURVE('',#390102,#390155,#390217,.T.); +#390217 = LINE('',#390218,#390219); +#390218 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#390219 = VECTOR('',#390220,1.); +#390220 = DIRECTION('',(0.,0.,1.)); +#390221 = CYLINDRICAL_SURFACE('',#390222,0.275); +#390222 = AXIS2_PLACEMENT_3D('',#390223,#390224,#390225); +#390223 = CARTESIAN_POINT('',(133.18,-154.52,-4.6E-02)); +#390224 = DIRECTION('',(-0.,-0.,-1.)); +#390225 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#390226 = ADVANCED_FACE('',(#390227),#390238,.T.); +#390227 = FACE_BOUND('',#390228,.T.); +#390228 = EDGE_LOOP('',(#390229,#390230,#390231,#390232)); +#390229 = ORIENTED_EDGE('',*,*,#390129,.T.); +#390230 = ORIENTED_EDGE('',*,*,#390216,.T.); +#390231 = ORIENTED_EDGE('',*,*,#390182,.F.); +#390232 = ORIENTED_EDGE('',*,*,#390233,.F.); +#390233 = EDGE_CURVE('',#390121,#390174,#390234,.T.); +#390234 = LINE('',#390235,#390236); +#390235 = CARTESIAN_POINT('',(133.455,-153.42,-4.6E-02)); +#390236 = VECTOR('',#390237,1.); +#390237 = DIRECTION('',(0.,0.,1.)); +#390238 = PLANE('',#390239); +#390239 = AXIS2_PLACEMENT_3D('',#390240,#390241,#390242); +#390240 = CARTESIAN_POINT('',(133.455,-154.52,-4.6E-02)); +#390241 = DIRECTION('',(-1.,0.,0.)); +#390242 = DIRECTION('',(0.,1.,0.)); +#390243 = ADVANCED_FACE('',(#390244),#390255,.F.); +#390244 = FACE_BOUND('',#390245,.T.); +#390245 = EDGE_LOOP('',(#390246,#390247,#390248,#390249)); +#390246 = ORIENTED_EDGE('',*,*,#390120,.T.); +#390247 = ORIENTED_EDGE('',*,*,#390233,.T.); +#390248 = ORIENTED_EDGE('',*,*,#390173,.F.); +#390249 = ORIENTED_EDGE('',*,*,#390250,.F.); +#390250 = EDGE_CURVE('',#390113,#390166,#390251,.T.); +#390251 = LINE('',#390252,#390253); +#390252 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#390253 = VECTOR('',#390254,1.); +#390254 = DIRECTION('',(0.,0.,1.)); +#390255 = CYLINDRICAL_SURFACE('',#390256,0.275); +#390256 = AXIS2_PLACEMENT_3D('',#390257,#390258,#390259); +#390257 = CARTESIAN_POINT('',(133.18,-153.42,-4.6E-02)); +#390258 = DIRECTION('',(-0.,-0.,-1.)); +#390259 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#390260 = ADVANCED_FACE('',(#390261),#390267,.T.); +#390261 = FACE_BOUND('',#390262,.T.); +#390262 = EDGE_LOOP('',(#390263,#390264,#390265,#390266)); +#390263 = ORIENTED_EDGE('',*,*,#390112,.T.); +#390264 = ORIENTED_EDGE('',*,*,#390250,.T.); +#390265 = ORIENTED_EDGE('',*,*,#390165,.F.); +#390266 = ORIENTED_EDGE('',*,*,#390209,.F.); +#390267 = PLANE('',#390268); +#390268 = AXIS2_PLACEMENT_3D('',#390269,#390270,#390271); +#390269 = CARTESIAN_POINT('',(132.905,-153.42,-4.6E-02)); +#390270 = DIRECTION('',(1.,0.,-0.)); +#390271 = DIRECTION('',(0.,-1.,0.)); +#390272 = MANIFOLD_SOLID_BREP('',#390273); +#390273 = CLOSED_SHELL('',(#390274,#390316,#390347,#390378,#390432, + #390486,#390498,#390520,#390537,#390554)); +#390274 = ADVANCED_FACE('',(#390275),#390311,.T.); +#390275 = FACE_BOUND('',#390276,.T.); +#390276 = EDGE_LOOP('',(#390277,#390287,#390296,#390304)); +#390277 = ORIENTED_EDGE('',*,*,#390278,.T.); +#390278 = EDGE_CURVE('',#390279,#390281,#390283,.T.); +#390279 = VERTEX_POINT('',#390280); +#390280 = CARTESIAN_POINT('',(133.68,-158.45,1.51)); +#390281 = VERTEX_POINT('',#390282); +#390282 = CARTESIAN_POINT('',(133.68,-158.45,1.55)); +#390283 = LINE('',#390284,#390285); +#390284 = CARTESIAN_POINT('',(133.68,-158.45,1.51)); +#390285 = VECTOR('',#390286,1.); +#390286 = DIRECTION('',(0.,0.,1.)); +#390287 = ORIENTED_EDGE('',*,*,#390288,.T.); +#390288 = EDGE_CURVE('',#390281,#390289,#390291,.T.); +#390289 = VERTEX_POINT('',#390290); +#390290 = CARTESIAN_POINT('',(132.68,-158.45,1.55)); +#390291 = CIRCLE('',#390292,0.5); +#390292 = AXIS2_PLACEMENT_3D('',#390293,#390294,#390295); +#390293 = CARTESIAN_POINT('',(133.18,-158.4499995566,1.55)); +#390294 = DIRECTION('',(-0.,0.,-1.)); +#390295 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390296 = ORIENTED_EDGE('',*,*,#390297,.F.); +#390297 = EDGE_CURVE('',#390298,#390289,#390300,.T.); +#390298 = VERTEX_POINT('',#390299); +#390299 = CARTESIAN_POINT('',(132.68,-158.45,1.51)); +#390300 = LINE('',#390301,#390302); +#390301 = CARTESIAN_POINT('',(132.68,-158.45,1.51)); +#390302 = VECTOR('',#390303,1.); +#390303 = DIRECTION('',(0.,0.,1.)); +#390304 = ORIENTED_EDGE('',*,*,#390305,.F.); +#390305 = EDGE_CURVE('',#390279,#390298,#390306,.T.); +#390306 = CIRCLE('',#390307,0.5); +#390307 = AXIS2_PLACEMENT_3D('',#390308,#390309,#390310); +#390308 = CARTESIAN_POINT('',(133.18,-158.4499995566,1.51)); +#390309 = DIRECTION('',(-0.,0.,-1.)); +#390310 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390311 = CYLINDRICAL_SURFACE('',#390312,0.5); +#390312 = AXIS2_PLACEMENT_3D('',#390313,#390314,#390315); +#390313 = CARTESIAN_POINT('',(133.18,-158.4499995566,1.51)); +#390314 = DIRECTION('',(-0.,0.,-1.)); +#390315 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390316 = ADVANCED_FACE('',(#390317),#390342,.T.); +#390317 = FACE_BOUND('',#390318,.T.); +#390318 = EDGE_LOOP('',(#390319,#390329,#390335,#390336)); +#390319 = ORIENTED_EDGE('',*,*,#390320,.T.); +#390320 = EDGE_CURVE('',#390321,#390323,#390325,.T.); +#390321 = VERTEX_POINT('',#390322); +#390322 = CARTESIAN_POINT('',(133.68,-157.85,1.51)); +#390323 = VERTEX_POINT('',#390324); +#390324 = CARTESIAN_POINT('',(133.68,-157.85,1.55)); +#390325 = LINE('',#390326,#390327); +#390326 = CARTESIAN_POINT('',(133.68,-157.85,1.51)); +#390327 = VECTOR('',#390328,1.); +#390328 = DIRECTION('',(0.,0.,1.)); +#390329 = ORIENTED_EDGE('',*,*,#390330,.T.); +#390330 = EDGE_CURVE('',#390323,#390281,#390331,.T.); +#390331 = LINE('',#390332,#390333); +#390332 = CARTESIAN_POINT('',(133.68,-157.85,1.55)); +#390333 = VECTOR('',#390334,1.); +#390334 = DIRECTION('',(0.,-1.,0.)); +#390335 = ORIENTED_EDGE('',*,*,#390278,.F.); +#390336 = ORIENTED_EDGE('',*,*,#390337,.F.); +#390337 = EDGE_CURVE('',#390321,#390279,#390338,.T.); +#390338 = LINE('',#390339,#390340); +#390339 = CARTESIAN_POINT('',(133.68,-157.85,1.51)); +#390340 = VECTOR('',#390341,1.); +#390341 = DIRECTION('',(0.,-1.,0.)); +#390342 = PLANE('',#390343); +#390343 = AXIS2_PLACEMENT_3D('',#390344,#390345,#390346); +#390344 = CARTESIAN_POINT('',(133.68,-157.85,1.51)); +#390345 = DIRECTION('',(1.,0.,-0.)); +#390346 = DIRECTION('',(0.,-1.,0.)); +#390347 = ADVANCED_FACE('',(#390348),#390373,.T.); +#390348 = FACE_BOUND('',#390349,.T.); +#390349 = EDGE_LOOP('',(#390350,#390351,#390359,#390367)); +#390350 = ORIENTED_EDGE('',*,*,#390297,.T.); +#390351 = ORIENTED_EDGE('',*,*,#390352,.T.); +#390352 = EDGE_CURVE('',#390289,#390353,#390355,.T.); +#390353 = VERTEX_POINT('',#390354); +#390354 = CARTESIAN_POINT('',(132.68,-157.85,1.55)); +#390355 = LINE('',#390356,#390357); +#390356 = CARTESIAN_POINT('',(132.68,-158.45,1.55)); +#390357 = VECTOR('',#390358,1.); +#390358 = DIRECTION('',(0.,1.,0.)); +#390359 = ORIENTED_EDGE('',*,*,#390360,.F.); +#390360 = EDGE_CURVE('',#390361,#390353,#390363,.T.); +#390361 = VERTEX_POINT('',#390362); +#390362 = CARTESIAN_POINT('',(132.68,-157.85,1.51)); +#390363 = LINE('',#390364,#390365); +#390364 = CARTESIAN_POINT('',(132.68,-157.85,1.51)); +#390365 = VECTOR('',#390366,1.); +#390366 = DIRECTION('',(0.,0.,1.)); +#390367 = ORIENTED_EDGE('',*,*,#390368,.F.); +#390368 = EDGE_CURVE('',#390298,#390361,#390369,.T.); +#390369 = LINE('',#390370,#390371); +#390370 = CARTESIAN_POINT('',(132.68,-158.45,1.51)); +#390371 = VECTOR('',#390372,1.); +#390372 = DIRECTION('',(0.,1.,0.)); +#390373 = PLANE('',#390374); +#390374 = AXIS2_PLACEMENT_3D('',#390375,#390376,#390377); +#390375 = CARTESIAN_POINT('',(132.68,-158.45,1.51)); +#390376 = DIRECTION('',(-1.,0.,0.)); +#390377 = DIRECTION('',(0.,1.,0.)); +#390378 = ADVANCED_FACE('',(#390379,#390391),#390427,.F.); +#390379 = FACE_BOUND('',#390380,.F.); +#390380 = EDGE_LOOP('',(#390381,#390382,#390383,#390390)); +#390381 = ORIENTED_EDGE('',*,*,#390305,.F.); +#390382 = ORIENTED_EDGE('',*,*,#390337,.F.); +#390383 = ORIENTED_EDGE('',*,*,#390384,.F.); +#390384 = EDGE_CURVE('',#390361,#390321,#390385,.T.); +#390385 = CIRCLE('',#390386,0.500000000001); +#390386 = AXIS2_PLACEMENT_3D('',#390387,#390388,#390389); +#390387 = CARTESIAN_POINT('',(133.18,-157.8499991518,1.51)); +#390388 = DIRECTION('',(0.,0.,-1.)); +#390389 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390390 = ORIENTED_EDGE('',*,*,#390368,.F.); +#390391 = FACE_BOUND('',#390392,.F.); +#390392 = EDGE_LOOP('',(#390393,#390404,#390412,#390421)); +#390393 = ORIENTED_EDGE('',*,*,#390394,.T.); +#390394 = EDGE_CURVE('',#390395,#390397,#390399,.T.); +#390395 = VERTEX_POINT('',#390396); +#390396 = CARTESIAN_POINT('',(133.455,-158.45,1.51)); +#390397 = VERTEX_POINT('',#390398); +#390398 = CARTESIAN_POINT('',(132.905,-158.45,1.51)); +#390399 = CIRCLE('',#390400,0.275); +#390400 = AXIS2_PLACEMENT_3D('',#390401,#390402,#390403); +#390401 = CARTESIAN_POINT('',(133.18,-158.45,1.51)); +#390402 = DIRECTION('',(-0.,0.,-1.)); +#390403 = DIRECTION('',(-1.,0.,0.)); +#390404 = ORIENTED_EDGE('',*,*,#390405,.T.); +#390405 = EDGE_CURVE('',#390397,#390406,#390408,.T.); +#390406 = VERTEX_POINT('',#390407); +#390407 = CARTESIAN_POINT('',(132.905,-157.85,1.51)); +#390408 = LINE('',#390409,#390410); +#390409 = CARTESIAN_POINT('',(132.905,-78.925,1.51)); +#390410 = VECTOR('',#390411,1.); +#390411 = DIRECTION('',(-0.,1.,0.)); +#390412 = ORIENTED_EDGE('',*,*,#390413,.T.); +#390413 = EDGE_CURVE('',#390406,#390414,#390416,.T.); +#390414 = VERTEX_POINT('',#390415); +#390415 = CARTESIAN_POINT('',(133.455,-157.85,1.51)); +#390416 = CIRCLE('',#390417,0.275); +#390417 = AXIS2_PLACEMENT_3D('',#390418,#390419,#390420); +#390418 = CARTESIAN_POINT('',(133.18,-157.85,1.51)); +#390419 = DIRECTION('',(0.,-0.,-1.)); +#390420 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390421 = ORIENTED_EDGE('',*,*,#390422,.T.); +#390422 = EDGE_CURVE('',#390414,#390395,#390423,.T.); +#390423 = LINE('',#390424,#390425); +#390424 = CARTESIAN_POINT('',(133.455,-79.225,1.51)); +#390425 = VECTOR('',#390426,1.); +#390426 = DIRECTION('',(0.,-1.,0.)); +#390427 = PLANE('',#390428); +#390428 = AXIS2_PLACEMENT_3D('',#390429,#390430,#390431); +#390429 = CARTESIAN_POINT('',(0.,0.,1.51)); +#390430 = DIRECTION('',(0.,0.,1.)); +#390431 = DIRECTION('',(1.,0.,-0.)); +#390432 = ADVANCED_FACE('',(#390433,#390445),#390481,.T.); +#390433 = FACE_BOUND('',#390434,.T.); +#390434 = EDGE_LOOP('',(#390435,#390436,#390437,#390444)); +#390435 = ORIENTED_EDGE('',*,*,#390288,.F.); +#390436 = ORIENTED_EDGE('',*,*,#390330,.F.); +#390437 = ORIENTED_EDGE('',*,*,#390438,.F.); +#390438 = EDGE_CURVE('',#390353,#390323,#390439,.T.); +#390439 = CIRCLE('',#390440,0.500000000001); +#390440 = AXIS2_PLACEMENT_3D('',#390441,#390442,#390443); +#390441 = CARTESIAN_POINT('',(133.18,-157.8499991518,1.55)); +#390442 = DIRECTION('',(0.,0.,-1.)); +#390443 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390444 = ORIENTED_EDGE('',*,*,#390352,.F.); +#390445 = FACE_BOUND('',#390446,.T.); +#390446 = EDGE_LOOP('',(#390447,#390458,#390466,#390475)); +#390447 = ORIENTED_EDGE('',*,*,#390448,.T.); +#390448 = EDGE_CURVE('',#390449,#390451,#390453,.T.); +#390449 = VERTEX_POINT('',#390450); +#390450 = CARTESIAN_POINT('',(133.455,-158.45,1.55)); +#390451 = VERTEX_POINT('',#390452); +#390452 = CARTESIAN_POINT('',(132.905,-158.45,1.55)); +#390453 = CIRCLE('',#390454,0.275); +#390454 = AXIS2_PLACEMENT_3D('',#390455,#390456,#390457); +#390455 = CARTESIAN_POINT('',(133.18,-158.45,1.55)); +#390456 = DIRECTION('',(-0.,0.,-1.)); +#390457 = DIRECTION('',(-1.,0.,0.)); +#390458 = ORIENTED_EDGE('',*,*,#390459,.T.); +#390459 = EDGE_CURVE('',#390451,#390460,#390462,.T.); +#390460 = VERTEX_POINT('',#390461); +#390461 = CARTESIAN_POINT('',(132.905,-157.85,1.55)); +#390462 = LINE('',#390463,#390464); +#390463 = CARTESIAN_POINT('',(132.905,-78.925,1.55)); +#390464 = VECTOR('',#390465,1.); +#390465 = DIRECTION('',(-0.,1.,0.)); +#390466 = ORIENTED_EDGE('',*,*,#390467,.T.); +#390467 = EDGE_CURVE('',#390460,#390468,#390470,.T.); +#390468 = VERTEX_POINT('',#390469); +#390469 = CARTESIAN_POINT('',(133.455,-157.85,1.55)); +#390470 = CIRCLE('',#390471,0.275); +#390471 = AXIS2_PLACEMENT_3D('',#390472,#390473,#390474); +#390472 = CARTESIAN_POINT('',(133.18,-157.85,1.55)); +#390473 = DIRECTION('',(0.,-0.,-1.)); +#390474 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390475 = ORIENTED_EDGE('',*,*,#390476,.T.); +#390476 = EDGE_CURVE('',#390468,#390449,#390477,.T.); +#390477 = LINE('',#390478,#390479); +#390478 = CARTESIAN_POINT('',(133.455,-79.225,1.55)); +#390479 = VECTOR('',#390480,1.); +#390480 = DIRECTION('',(0.,-1.,0.)); +#390481 = PLANE('',#390482); +#390482 = AXIS2_PLACEMENT_3D('',#390483,#390484,#390485); +#390483 = CARTESIAN_POINT('',(0.,0.,1.55)); +#390484 = DIRECTION('',(0.,0.,1.)); +#390485 = DIRECTION('',(1.,0.,-0.)); +#390486 = ADVANCED_FACE('',(#390487),#390493,.T.); +#390487 = FACE_BOUND('',#390488,.T.); +#390488 = EDGE_LOOP('',(#390489,#390490,#390491,#390492)); +#390489 = ORIENTED_EDGE('',*,*,#390360,.T.); +#390490 = ORIENTED_EDGE('',*,*,#390438,.T.); +#390491 = ORIENTED_EDGE('',*,*,#390320,.F.); +#390492 = ORIENTED_EDGE('',*,*,#390384,.F.); +#390493 = CYLINDRICAL_SURFACE('',#390494,0.500000000001); +#390494 = AXIS2_PLACEMENT_3D('',#390495,#390496,#390497); +#390495 = CARTESIAN_POINT('',(133.18,-157.8499991518,1.51)); +#390496 = DIRECTION('',(0.,0.,-1.)); +#390497 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390498 = ADVANCED_FACE('',(#390499),#390515,.F.); +#390499 = FACE_BOUND('',#390500,.T.); +#390500 = EDGE_LOOP('',(#390501,#390502,#390508,#390509)); +#390501 = ORIENTED_EDGE('',*,*,#390394,.T.); +#390502 = ORIENTED_EDGE('',*,*,#390503,.T.); +#390503 = EDGE_CURVE('',#390397,#390451,#390504,.T.); +#390504 = LINE('',#390505,#390506); +#390505 = CARTESIAN_POINT('',(132.905,-158.45,-4.6E-02)); +#390506 = VECTOR('',#390507,1.); +#390507 = DIRECTION('',(0.,0.,1.)); +#390508 = ORIENTED_EDGE('',*,*,#390448,.F.); +#390509 = ORIENTED_EDGE('',*,*,#390510,.F.); +#390510 = EDGE_CURVE('',#390395,#390449,#390511,.T.); +#390511 = LINE('',#390512,#390513); +#390512 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#390513 = VECTOR('',#390514,1.); +#390514 = DIRECTION('',(0.,0.,1.)); +#390515 = CYLINDRICAL_SURFACE('',#390516,0.275); +#390516 = AXIS2_PLACEMENT_3D('',#390517,#390518,#390519); +#390517 = CARTESIAN_POINT('',(133.18,-158.45,-4.6E-02)); +#390518 = DIRECTION('',(-0.,-0.,-1.)); +#390519 = DIRECTION('',(-1.,0.,-0.)); +#390520 = ADVANCED_FACE('',(#390521),#390532,.T.); +#390521 = FACE_BOUND('',#390522,.T.); +#390522 = EDGE_LOOP('',(#390523,#390524,#390525,#390526)); +#390523 = ORIENTED_EDGE('',*,*,#390422,.T.); +#390524 = ORIENTED_EDGE('',*,*,#390510,.T.); +#390525 = ORIENTED_EDGE('',*,*,#390476,.F.); +#390526 = ORIENTED_EDGE('',*,*,#390527,.F.); +#390527 = EDGE_CURVE('',#390414,#390468,#390528,.T.); +#390528 = LINE('',#390529,#390530); +#390529 = CARTESIAN_POINT('',(133.455,-157.85,-4.6E-02)); +#390530 = VECTOR('',#390531,1.); +#390531 = DIRECTION('',(0.,0.,1.)); +#390532 = PLANE('',#390533); +#390533 = AXIS2_PLACEMENT_3D('',#390534,#390535,#390536); +#390534 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#390535 = DIRECTION('',(-1.,0.,0.)); +#390536 = DIRECTION('',(0.,1.,0.)); +#390537 = ADVANCED_FACE('',(#390538),#390549,.F.); +#390538 = FACE_BOUND('',#390539,.T.); +#390539 = EDGE_LOOP('',(#390540,#390541,#390542,#390543)); +#390540 = ORIENTED_EDGE('',*,*,#390413,.T.); +#390541 = ORIENTED_EDGE('',*,*,#390527,.T.); +#390542 = ORIENTED_EDGE('',*,*,#390467,.F.); +#390543 = ORIENTED_EDGE('',*,*,#390544,.F.); +#390544 = EDGE_CURVE('',#390406,#390460,#390545,.T.); +#390545 = LINE('',#390546,#390547); +#390546 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#390547 = VECTOR('',#390548,1.); +#390548 = DIRECTION('',(0.,0.,1.)); +#390549 = CYLINDRICAL_SURFACE('',#390550,0.275); +#390550 = AXIS2_PLACEMENT_3D('',#390551,#390552,#390553); +#390551 = CARTESIAN_POINT('',(133.18,-157.85,-4.6E-02)); +#390552 = DIRECTION('',(-0.,-0.,-1.)); +#390553 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390554 = ADVANCED_FACE('',(#390555),#390561,.T.); +#390555 = FACE_BOUND('',#390556,.T.); +#390556 = EDGE_LOOP('',(#390557,#390558,#390559,#390560)); +#390557 = ORIENTED_EDGE('',*,*,#390405,.T.); +#390558 = ORIENTED_EDGE('',*,*,#390544,.T.); +#390559 = ORIENTED_EDGE('',*,*,#390459,.F.); +#390560 = ORIENTED_EDGE('',*,*,#390503,.F.); +#390561 = PLANE('',#390562); +#390562 = AXIS2_PLACEMENT_3D('',#390563,#390564,#390565); +#390563 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#390564 = DIRECTION('',(1.,0.,-0.)); +#390565 = DIRECTION('',(0.,-1.,0.)); +#390566 = MANIFOLD_SOLID_BREP('',#390567); +#390567 = CLOSED_SHELL('',(#390568,#390610,#390641,#390672,#390726, + #390780,#390792,#390814,#390831,#390848)); +#390568 = ADVANCED_FACE('',(#390569),#390605,.T.); +#390569 = FACE_BOUND('',#390570,.F.); +#390570 = EDGE_LOOP('',(#390571,#390581,#390590,#390598)); +#390571 = ORIENTED_EDGE('',*,*,#390572,.T.); +#390572 = EDGE_CURVE('',#390573,#390575,#390577,.T.); +#390573 = VERTEX_POINT('',#390574); +#390574 = CARTESIAN_POINT('',(133.68,-158.45,0.)); +#390575 = VERTEX_POINT('',#390576); +#390576 = CARTESIAN_POINT('',(133.68,-158.45,-4.E-02)); +#390577 = LINE('',#390578,#390579); +#390578 = CARTESIAN_POINT('',(133.68,-158.45,0.)); +#390579 = VECTOR('',#390580,1.); +#390580 = DIRECTION('',(0.,0.,-1.)); +#390581 = ORIENTED_EDGE('',*,*,#390582,.T.); +#390582 = EDGE_CURVE('',#390575,#390583,#390585,.T.); +#390583 = VERTEX_POINT('',#390584); +#390584 = CARTESIAN_POINT('',(132.68,-158.45,-4.E-02)); +#390585 = CIRCLE('',#390586,0.5); +#390586 = AXIS2_PLACEMENT_3D('',#390587,#390588,#390589); +#390587 = CARTESIAN_POINT('',(133.18,-158.4499995566,-4.E-02)); +#390588 = DIRECTION('',(-0.,0.,-1.)); +#390589 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390590 = ORIENTED_EDGE('',*,*,#390591,.F.); +#390591 = EDGE_CURVE('',#390592,#390583,#390594,.T.); +#390592 = VERTEX_POINT('',#390593); +#390593 = CARTESIAN_POINT('',(132.68,-158.45,0.)); +#390594 = LINE('',#390595,#390596); +#390595 = CARTESIAN_POINT('',(132.68,-158.45,0.)); +#390596 = VECTOR('',#390597,1.); +#390597 = DIRECTION('',(0.,0.,-1.)); +#390598 = ORIENTED_EDGE('',*,*,#390599,.F.); +#390599 = EDGE_CURVE('',#390573,#390592,#390600,.T.); +#390600 = CIRCLE('',#390601,0.5); +#390601 = AXIS2_PLACEMENT_3D('',#390602,#390603,#390604); +#390602 = CARTESIAN_POINT('',(133.18,-158.4499995566,0.)); +#390603 = DIRECTION('',(-0.,0.,-1.)); +#390604 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390605 = CYLINDRICAL_SURFACE('',#390606,0.5); +#390606 = AXIS2_PLACEMENT_3D('',#390607,#390608,#390609); +#390607 = CARTESIAN_POINT('',(133.18,-158.4499995566,0.)); +#390608 = DIRECTION('',(0.,-0.,1.)); +#390609 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#390610 = ADVANCED_FACE('',(#390611),#390636,.F.); +#390611 = FACE_BOUND('',#390612,.F.); +#390612 = EDGE_LOOP('',(#390613,#390623,#390629,#390630)); +#390613 = ORIENTED_EDGE('',*,*,#390614,.T.); +#390614 = EDGE_CURVE('',#390615,#390617,#390619,.T.); +#390615 = VERTEX_POINT('',#390616); +#390616 = CARTESIAN_POINT('',(133.68,-157.85,0.)); +#390617 = VERTEX_POINT('',#390618); +#390618 = CARTESIAN_POINT('',(133.68,-157.85,-4.E-02)); +#390619 = LINE('',#390620,#390621); +#390620 = CARTESIAN_POINT('',(133.68,-157.85,0.)); +#390621 = VECTOR('',#390622,1.); +#390622 = DIRECTION('',(0.,0.,-1.)); +#390623 = ORIENTED_EDGE('',*,*,#390624,.T.); +#390624 = EDGE_CURVE('',#390617,#390575,#390625,.T.); +#390625 = LINE('',#390626,#390627); +#390626 = CARTESIAN_POINT('',(133.68,-157.85,-4.E-02)); +#390627 = VECTOR('',#390628,1.); +#390628 = DIRECTION('',(0.,-1.,0.)); +#390629 = ORIENTED_EDGE('',*,*,#390572,.F.); +#390630 = ORIENTED_EDGE('',*,*,#390631,.F.); +#390631 = EDGE_CURVE('',#390615,#390573,#390632,.T.); +#390632 = LINE('',#390633,#390634); +#390633 = CARTESIAN_POINT('',(133.68,-157.85,0.)); +#390634 = VECTOR('',#390635,1.); +#390635 = DIRECTION('',(0.,-1.,0.)); +#390636 = PLANE('',#390637); +#390637 = AXIS2_PLACEMENT_3D('',#390638,#390639,#390640); +#390638 = CARTESIAN_POINT('',(133.68,-157.85,0.)); +#390639 = DIRECTION('',(-1.,-0.,-0.)); +#390640 = DIRECTION('',(0.,-1.,0.)); +#390641 = ADVANCED_FACE('',(#390642),#390667,.F.); +#390642 = FACE_BOUND('',#390643,.F.); +#390643 = EDGE_LOOP('',(#390644,#390645,#390653,#390661)); +#390644 = ORIENTED_EDGE('',*,*,#390591,.T.); +#390645 = ORIENTED_EDGE('',*,*,#390646,.T.); +#390646 = EDGE_CURVE('',#390583,#390647,#390649,.T.); +#390647 = VERTEX_POINT('',#390648); +#390648 = CARTESIAN_POINT('',(132.68,-157.85,-4.E-02)); +#390649 = LINE('',#390650,#390651); +#390650 = CARTESIAN_POINT('',(132.68,-158.45,-4.E-02)); +#390651 = VECTOR('',#390652,1.); +#390652 = DIRECTION('',(0.,1.,0.)); +#390653 = ORIENTED_EDGE('',*,*,#390654,.F.); +#390654 = EDGE_CURVE('',#390655,#390647,#390657,.T.); +#390655 = VERTEX_POINT('',#390656); +#390656 = CARTESIAN_POINT('',(132.68,-157.85,0.)); +#390657 = LINE('',#390658,#390659); +#390658 = CARTESIAN_POINT('',(132.68,-157.85,0.)); +#390659 = VECTOR('',#390660,1.); +#390660 = DIRECTION('',(0.,0.,-1.)); +#390661 = ORIENTED_EDGE('',*,*,#390662,.F.); +#390662 = EDGE_CURVE('',#390592,#390655,#390663,.T.); +#390663 = LINE('',#390664,#390665); +#390664 = CARTESIAN_POINT('',(132.68,-158.45,0.)); +#390665 = VECTOR('',#390666,1.); +#390666 = DIRECTION('',(0.,1.,0.)); +#390667 = PLANE('',#390668); +#390668 = AXIS2_PLACEMENT_3D('',#390669,#390670,#390671); +#390669 = CARTESIAN_POINT('',(132.68,-158.45,0.)); +#390670 = DIRECTION('',(1.,-0.,0.)); +#390671 = DIRECTION('',(0.,1.,0.)); +#390672 = ADVANCED_FACE('',(#390673,#390685),#390721,.F.); +#390673 = FACE_BOUND('',#390674,.F.); +#390674 = EDGE_LOOP('',(#390675,#390676,#390677,#390684)); +#390675 = ORIENTED_EDGE('',*,*,#390599,.T.); +#390676 = ORIENTED_EDGE('',*,*,#390662,.T.); +#390677 = ORIENTED_EDGE('',*,*,#390678,.T.); +#390678 = EDGE_CURVE('',#390655,#390615,#390679,.T.); +#390679 = CIRCLE('',#390680,0.500000000001); +#390680 = AXIS2_PLACEMENT_3D('',#390681,#390682,#390683); +#390681 = CARTESIAN_POINT('',(133.18,-157.8499991518,0.)); +#390682 = DIRECTION('',(0.,0.,-1.)); +#390683 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390684 = ORIENTED_EDGE('',*,*,#390631,.T.); +#390685 = FACE_BOUND('',#390686,.F.); +#390686 = EDGE_LOOP('',(#390687,#390698,#390706,#390715)); +#390687 = ORIENTED_EDGE('',*,*,#390688,.F.); +#390688 = EDGE_CURVE('',#390689,#390691,#390693,.T.); +#390689 = VERTEX_POINT('',#390690); +#390690 = CARTESIAN_POINT('',(132.905,-157.85,0.)); +#390691 = VERTEX_POINT('',#390692); +#390692 = CARTESIAN_POINT('',(133.455,-157.85,0.)); +#390693 = CIRCLE('',#390694,0.275); +#390694 = AXIS2_PLACEMENT_3D('',#390695,#390696,#390697); +#390695 = CARTESIAN_POINT('',(133.18,-157.85,0.)); +#390696 = DIRECTION('',(0.,-0.,-1.)); +#390697 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390698 = ORIENTED_EDGE('',*,*,#390699,.T.); +#390699 = EDGE_CURVE('',#390689,#390700,#390702,.T.); +#390700 = VERTEX_POINT('',#390701); +#390701 = CARTESIAN_POINT('',(132.905,-158.45,0.)); +#390702 = LINE('',#390703,#390704); +#390703 = CARTESIAN_POINT('',(132.905,-78.925,0.)); +#390704 = VECTOR('',#390705,1.); +#390705 = DIRECTION('',(0.,-1.,0.)); +#390706 = ORIENTED_EDGE('',*,*,#390707,.F.); +#390707 = EDGE_CURVE('',#390708,#390700,#390710,.T.); +#390708 = VERTEX_POINT('',#390709); +#390709 = CARTESIAN_POINT('',(133.455,-158.45,0.)); +#390710 = CIRCLE('',#390711,0.275); +#390711 = AXIS2_PLACEMENT_3D('',#390712,#390713,#390714); +#390712 = CARTESIAN_POINT('',(133.18,-158.45,0.)); +#390713 = DIRECTION('',(-0.,0.,-1.)); +#390714 = DIRECTION('',(-1.,0.,0.)); +#390715 = ORIENTED_EDGE('',*,*,#390716,.T.); +#390716 = EDGE_CURVE('',#390708,#390691,#390717,.T.); +#390717 = LINE('',#390718,#390719); +#390718 = CARTESIAN_POINT('',(133.455,-79.225,0.)); +#390719 = VECTOR('',#390720,1.); +#390720 = DIRECTION('',(0.,1.,-0.)); +#390721 = PLANE('',#390722); +#390722 = AXIS2_PLACEMENT_3D('',#390723,#390724,#390725); +#390723 = CARTESIAN_POINT('',(0.,0.,0.)); +#390724 = DIRECTION('',(-0.,-0.,-1.)); +#390725 = DIRECTION('',(-1.,0.,0.)); +#390726 = ADVANCED_FACE('',(#390727,#390739),#390775,.T.); +#390727 = FACE_BOUND('',#390728,.T.); +#390728 = EDGE_LOOP('',(#390729,#390730,#390731,#390738)); +#390729 = ORIENTED_EDGE('',*,*,#390582,.T.); +#390730 = ORIENTED_EDGE('',*,*,#390646,.T.); +#390731 = ORIENTED_EDGE('',*,*,#390732,.T.); +#390732 = EDGE_CURVE('',#390647,#390617,#390733,.T.); +#390733 = CIRCLE('',#390734,0.500000000001); +#390734 = AXIS2_PLACEMENT_3D('',#390735,#390736,#390737); +#390735 = CARTESIAN_POINT('',(133.18,-157.8499991518,-4.E-02)); +#390736 = DIRECTION('',(0.,0.,-1.)); +#390737 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390738 = ORIENTED_EDGE('',*,*,#390624,.T.); +#390739 = FACE_BOUND('',#390740,.T.); +#390740 = EDGE_LOOP('',(#390741,#390752,#390760,#390769)); +#390741 = ORIENTED_EDGE('',*,*,#390742,.F.); +#390742 = EDGE_CURVE('',#390743,#390745,#390747,.T.); +#390743 = VERTEX_POINT('',#390744); +#390744 = CARTESIAN_POINT('',(132.905,-157.85,-4.E-02)); +#390745 = VERTEX_POINT('',#390746); +#390746 = CARTESIAN_POINT('',(133.455,-157.85,-4.E-02)); +#390747 = CIRCLE('',#390748,0.275); +#390748 = AXIS2_PLACEMENT_3D('',#390749,#390750,#390751); +#390749 = CARTESIAN_POINT('',(133.18,-157.85,-4.E-02)); +#390750 = DIRECTION('',(0.,-0.,-1.)); +#390751 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390752 = ORIENTED_EDGE('',*,*,#390753,.T.); +#390753 = EDGE_CURVE('',#390743,#390754,#390756,.T.); +#390754 = VERTEX_POINT('',#390755); +#390755 = CARTESIAN_POINT('',(132.905,-158.45,-4.E-02)); +#390756 = LINE('',#390757,#390758); +#390757 = CARTESIAN_POINT('',(132.905,-78.925,-4.E-02)); +#390758 = VECTOR('',#390759,1.); +#390759 = DIRECTION('',(0.,-1.,0.)); +#390760 = ORIENTED_EDGE('',*,*,#390761,.F.); +#390761 = EDGE_CURVE('',#390762,#390754,#390764,.T.); +#390762 = VERTEX_POINT('',#390763); +#390763 = CARTESIAN_POINT('',(133.455,-158.45,-4.E-02)); +#390764 = CIRCLE('',#390765,0.275); +#390765 = AXIS2_PLACEMENT_3D('',#390766,#390767,#390768); +#390766 = CARTESIAN_POINT('',(133.18,-158.45,-4.E-02)); +#390767 = DIRECTION('',(-0.,0.,-1.)); +#390768 = DIRECTION('',(-1.,0.,0.)); +#390769 = ORIENTED_EDGE('',*,*,#390770,.T.); +#390770 = EDGE_CURVE('',#390762,#390745,#390771,.T.); +#390771 = LINE('',#390772,#390773); +#390772 = CARTESIAN_POINT('',(133.455,-79.225,-4.E-02)); +#390773 = VECTOR('',#390774,1.); +#390774 = DIRECTION('',(0.,1.,-0.)); +#390775 = PLANE('',#390776); +#390776 = AXIS2_PLACEMENT_3D('',#390777,#390778,#390779); +#390777 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#390778 = DIRECTION('',(-0.,-0.,-1.)); +#390779 = DIRECTION('',(-1.,0.,0.)); +#390780 = ADVANCED_FACE('',(#390781),#390787,.T.); +#390781 = FACE_BOUND('',#390782,.F.); +#390782 = EDGE_LOOP('',(#390783,#390784,#390785,#390786)); +#390783 = ORIENTED_EDGE('',*,*,#390654,.T.); +#390784 = ORIENTED_EDGE('',*,*,#390732,.T.); +#390785 = ORIENTED_EDGE('',*,*,#390614,.F.); +#390786 = ORIENTED_EDGE('',*,*,#390678,.F.); +#390787 = CYLINDRICAL_SURFACE('',#390788,0.500000000001); +#390788 = AXIS2_PLACEMENT_3D('',#390789,#390790,#390791); +#390789 = CARTESIAN_POINT('',(133.18,-157.8499991518,0.)); +#390790 = DIRECTION('',(-0.,-0.,1.)); +#390791 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#390792 = ADVANCED_FACE('',(#390793),#390809,.F.); +#390793 = FACE_BOUND('',#390794,.T.); +#390794 = EDGE_LOOP('',(#390795,#390796,#390802,#390803)); +#390795 = ORIENTED_EDGE('',*,*,#390742,.T.); +#390796 = ORIENTED_EDGE('',*,*,#390797,.T.); +#390797 = EDGE_CURVE('',#390745,#390691,#390798,.T.); +#390798 = LINE('',#390799,#390800); +#390799 = CARTESIAN_POINT('',(133.455,-157.85,-4.6E-02)); +#390800 = VECTOR('',#390801,1.); +#390801 = DIRECTION('',(0.,0.,1.)); +#390802 = ORIENTED_EDGE('',*,*,#390688,.F.); +#390803 = ORIENTED_EDGE('',*,*,#390804,.F.); +#390804 = EDGE_CURVE('',#390743,#390689,#390805,.T.); +#390805 = LINE('',#390806,#390807); +#390806 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#390807 = VECTOR('',#390808,1.); +#390808 = DIRECTION('',(0.,0.,1.)); +#390809 = CYLINDRICAL_SURFACE('',#390810,0.275); +#390810 = AXIS2_PLACEMENT_3D('',#390811,#390812,#390813); +#390811 = CARTESIAN_POINT('',(133.18,-157.85,-4.6E-02)); +#390812 = DIRECTION('',(-0.,-0.,-1.)); +#390813 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#390814 = ADVANCED_FACE('',(#390815),#390826,.T.); +#390815 = FACE_BOUND('',#390816,.T.); +#390816 = EDGE_LOOP('',(#390817,#390818,#390824,#390825)); +#390817 = ORIENTED_EDGE('',*,*,#390770,.F.); +#390818 = ORIENTED_EDGE('',*,*,#390819,.T.); +#390819 = EDGE_CURVE('',#390762,#390708,#390820,.T.); +#390820 = LINE('',#390821,#390822); +#390821 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#390822 = VECTOR('',#390823,1.); +#390823 = DIRECTION('',(0.,0.,1.)); +#390824 = ORIENTED_EDGE('',*,*,#390716,.T.); +#390825 = ORIENTED_EDGE('',*,*,#390797,.F.); +#390826 = PLANE('',#390827); +#390827 = AXIS2_PLACEMENT_3D('',#390828,#390829,#390830); +#390828 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#390829 = DIRECTION('',(-1.,0.,0.)); +#390830 = DIRECTION('',(0.,1.,0.)); +#390831 = ADVANCED_FACE('',(#390832),#390843,.F.); +#390832 = FACE_BOUND('',#390833,.T.); +#390833 = EDGE_LOOP('',(#390834,#390835,#390841,#390842)); +#390834 = ORIENTED_EDGE('',*,*,#390761,.T.); +#390835 = ORIENTED_EDGE('',*,*,#390836,.T.); +#390836 = EDGE_CURVE('',#390754,#390700,#390837,.T.); +#390837 = LINE('',#390838,#390839); +#390838 = CARTESIAN_POINT('',(132.905,-158.45,-4.6E-02)); +#390839 = VECTOR('',#390840,1.); +#390840 = DIRECTION('',(0.,0.,1.)); +#390841 = ORIENTED_EDGE('',*,*,#390707,.F.); +#390842 = ORIENTED_EDGE('',*,*,#390819,.F.); +#390843 = CYLINDRICAL_SURFACE('',#390844,0.275); +#390844 = AXIS2_PLACEMENT_3D('',#390845,#390846,#390847); +#390845 = CARTESIAN_POINT('',(133.18,-158.45,-4.6E-02)); +#390846 = DIRECTION('',(-0.,-0.,-1.)); +#390847 = DIRECTION('',(-1.,0.,-0.)); +#390848 = ADVANCED_FACE('',(#390849),#390855,.T.); +#390849 = FACE_BOUND('',#390850,.T.); +#390850 = EDGE_LOOP('',(#390851,#390852,#390853,#390854)); +#390851 = ORIENTED_EDGE('',*,*,#390753,.F.); +#390852 = ORIENTED_EDGE('',*,*,#390804,.T.); +#390853 = ORIENTED_EDGE('',*,*,#390699,.T.); +#390854 = ORIENTED_EDGE('',*,*,#390836,.F.); +#390855 = PLANE('',#390856); +#390856 = AXIS2_PLACEMENT_3D('',#390857,#390858,#390859); +#390857 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#390858 = DIRECTION('',(1.,0.,-0.)); +#390859 = DIRECTION('',(0.,-1.,0.)); +#390860 = MANIFOLD_SOLID_BREP('',#390861); +#390861 = CLOSED_SHELL('',(#390862,#390902,#390935,#390968,#391021, + #391074,#391086,#391108,#391125,#391142)); +#390862 = ADVANCED_FACE('',(#390863),#390897,.F.); +#390863 = FACE_BOUND('',#390864,.F.); +#390864 = EDGE_LOOP('',(#390865,#390875,#390883,#390891)); +#390865 = ORIENTED_EDGE('',*,*,#390866,.T.); +#390866 = EDGE_CURVE('',#390867,#390869,#390871,.T.); +#390867 = VERTEX_POINT('',#390868); +#390868 = CARTESIAN_POINT('',(132.88,-157.85,-4.E-02)); +#390869 = VERTEX_POINT('',#390870); +#390870 = CARTESIAN_POINT('',(132.88,-157.85,1.55)); +#390871 = LINE('',#390872,#390873); +#390872 = CARTESIAN_POINT('',(132.88,-157.85,-4.E-02)); +#390873 = VECTOR('',#390874,1.); +#390874 = DIRECTION('',(0.,0.,1.)); +#390875 = ORIENTED_EDGE('',*,*,#390876,.T.); +#390876 = EDGE_CURVE('',#390869,#390877,#390879,.T.); +#390877 = VERTEX_POINT('',#390878); +#390878 = CARTESIAN_POINT('',(132.88,-158.45,1.55)); +#390879 = LINE('',#390880,#390881); +#390880 = CARTESIAN_POINT('',(132.88,-157.85,1.55)); +#390881 = VECTOR('',#390882,1.); +#390882 = DIRECTION('',(0.,-1.,0.)); +#390883 = ORIENTED_EDGE('',*,*,#390884,.F.); +#390884 = EDGE_CURVE('',#390885,#390877,#390887,.T.); +#390885 = VERTEX_POINT('',#390886); +#390886 = CARTESIAN_POINT('',(132.88,-158.45,-4.E-02)); +#390887 = LINE('',#390888,#390889); +#390888 = CARTESIAN_POINT('',(132.88,-158.45,-4.E-02)); +#390889 = VECTOR('',#390890,1.); +#390890 = DIRECTION('',(0.,0.,1.)); +#390891 = ORIENTED_EDGE('',*,*,#390892,.F.); +#390892 = EDGE_CURVE('',#390867,#390885,#390893,.T.); +#390893 = LINE('',#390894,#390895); +#390894 = CARTESIAN_POINT('',(132.88,-157.85,-4.E-02)); +#390895 = VECTOR('',#390896,1.); +#390896 = DIRECTION('',(0.,-1.,0.)); +#390897 = PLANE('',#390898); +#390898 = AXIS2_PLACEMENT_3D('',#390899,#390900,#390901); +#390899 = CARTESIAN_POINT('',(132.88,-157.85,-4.E-02)); +#390900 = DIRECTION('',(1.,0.,-0.)); +#390901 = DIRECTION('',(0.,-1.,0.)); +#390902 = ADVANCED_FACE('',(#390903),#390930,.T.); +#390903 = FACE_BOUND('',#390904,.F.); +#390904 = EDGE_LOOP('',(#390905,#390915,#390922,#390923)); +#390905 = ORIENTED_EDGE('',*,*,#390906,.T.); +#390906 = EDGE_CURVE('',#390907,#390909,#390911,.T.); +#390907 = VERTEX_POINT('',#390908); +#390908 = CARTESIAN_POINT('',(133.48,-157.85,-4.E-02)); +#390909 = VERTEX_POINT('',#390910); +#390910 = CARTESIAN_POINT('',(133.48,-157.85,1.55)); +#390911 = LINE('',#390912,#390913); +#390912 = CARTESIAN_POINT('',(133.48,-157.85,-4.E-02)); +#390913 = VECTOR('',#390914,1.); +#390914 = DIRECTION('',(0.,0.,1.)); +#390915 = ORIENTED_EDGE('',*,*,#390916,.T.); +#390916 = EDGE_CURVE('',#390909,#390869,#390917,.T.); +#390917 = CIRCLE('',#390918,0.3); +#390918 = AXIS2_PLACEMENT_3D('',#390919,#390920,#390921); +#390919 = CARTESIAN_POINT('',(133.18,-157.85,1.55)); +#390920 = DIRECTION('',(0.,0.,1.)); +#390921 = DIRECTION('',(1.,0.,-0.)); +#390922 = ORIENTED_EDGE('',*,*,#390866,.F.); +#390923 = ORIENTED_EDGE('',*,*,#390924,.F.); +#390924 = EDGE_CURVE('',#390907,#390867,#390925,.T.); +#390925 = CIRCLE('',#390926,0.3); +#390926 = AXIS2_PLACEMENT_3D('',#390927,#390928,#390929); +#390927 = CARTESIAN_POINT('',(133.18,-157.85,-4.E-02)); +#390928 = DIRECTION('',(0.,0.,1.)); +#390929 = DIRECTION('',(1.,0.,-0.)); +#390930 = CYLINDRICAL_SURFACE('',#390931,0.3); +#390931 = AXIS2_PLACEMENT_3D('',#390932,#390933,#390934); +#390932 = CARTESIAN_POINT('',(133.18,-157.85,-4.E-02)); +#390933 = DIRECTION('',(-0.,-0.,-1.)); +#390934 = DIRECTION('',(1.,0.,-0.)); +#390935 = ADVANCED_FACE('',(#390936),#390963,.T.); +#390936 = FACE_BOUND('',#390937,.F.); +#390937 = EDGE_LOOP('',(#390938,#390939,#390948,#390956)); +#390938 = ORIENTED_EDGE('',*,*,#390884,.T.); +#390939 = ORIENTED_EDGE('',*,*,#390940,.T.); +#390940 = EDGE_CURVE('',#390877,#390941,#390943,.T.); +#390941 = VERTEX_POINT('',#390942); +#390942 = CARTESIAN_POINT('',(133.48,-158.45,1.55)); +#390943 = CIRCLE('',#390944,0.3); +#390944 = AXIS2_PLACEMENT_3D('',#390945,#390946,#390947); +#390945 = CARTESIAN_POINT('',(133.18,-158.45,1.55)); +#390946 = DIRECTION('',(0.,0.,1.)); +#390947 = DIRECTION('',(-1.,9.473903143469E-14,-0.)); +#390948 = ORIENTED_EDGE('',*,*,#390949,.F.); +#390949 = EDGE_CURVE('',#390950,#390941,#390952,.T.); +#390950 = VERTEX_POINT('',#390951); +#390951 = CARTESIAN_POINT('',(133.48,-158.45,-4.E-02)); +#390952 = LINE('',#390953,#390954); +#390953 = CARTESIAN_POINT('',(133.48,-158.45,-4.E-02)); +#390954 = VECTOR('',#390955,1.); +#390955 = DIRECTION('',(0.,0.,1.)); +#390956 = ORIENTED_EDGE('',*,*,#390957,.F.); +#390957 = EDGE_CURVE('',#390885,#390950,#390958,.T.); +#390958 = CIRCLE('',#390959,0.3); +#390959 = AXIS2_PLACEMENT_3D('',#390960,#390961,#390962); +#390960 = CARTESIAN_POINT('',(133.18,-158.45,-4.E-02)); +#390961 = DIRECTION('',(0.,0.,1.)); +#390962 = DIRECTION('',(-1.,9.473903143469E-14,-0.)); +#390963 = CYLINDRICAL_SURFACE('',#390964,0.3); +#390964 = AXIS2_PLACEMENT_3D('',#390965,#390966,#390967); +#390965 = CARTESIAN_POINT('',(133.18,-158.45,-4.E-02)); +#390966 = DIRECTION('',(-0.,-0.,-1.)); +#390967 = DIRECTION('',(-1.,9.473903143469E-14,-0.)); +#390968 = ADVANCED_FACE('',(#390969,#390980),#391016,.F.); +#390969 = FACE_BOUND('',#390970,.F.); +#390970 = EDGE_LOOP('',(#390971,#390972,#390973,#390979)); +#390971 = ORIENTED_EDGE('',*,*,#390892,.T.); +#390972 = ORIENTED_EDGE('',*,*,#390957,.T.); +#390973 = ORIENTED_EDGE('',*,*,#390974,.T.); +#390974 = EDGE_CURVE('',#390950,#390907,#390975,.T.); +#390975 = LINE('',#390976,#390977); +#390976 = CARTESIAN_POINT('',(133.48,-158.45,-4.E-02)); +#390977 = VECTOR('',#390978,1.); +#390978 = DIRECTION('',(0.,1.,0.)); +#390979 = ORIENTED_EDGE('',*,*,#390924,.T.); +#390980 = FACE_BOUND('',#390981,.F.); +#390981 = EDGE_LOOP('',(#390982,#390993,#391001,#391010)); +#390982 = ORIENTED_EDGE('',*,*,#390983,.T.); +#390983 = EDGE_CURVE('',#390984,#390986,#390988,.T.); +#390984 = VERTEX_POINT('',#390985); +#390985 = CARTESIAN_POINT('',(133.455,-158.45,-4.E-02)); +#390986 = VERTEX_POINT('',#390987); +#390987 = CARTESIAN_POINT('',(132.905,-158.45,-4.E-02)); +#390988 = CIRCLE('',#390989,0.275); +#390989 = AXIS2_PLACEMENT_3D('',#390990,#390991,#390992); +#390990 = CARTESIAN_POINT('',(133.18,-158.45,-4.E-02)); +#390991 = DIRECTION('',(-0.,0.,-1.)); +#390992 = DIRECTION('',(-1.,0.,0.)); +#390993 = ORIENTED_EDGE('',*,*,#390994,.T.); +#390994 = EDGE_CURVE('',#390986,#390995,#390997,.T.); +#390995 = VERTEX_POINT('',#390996); +#390996 = CARTESIAN_POINT('',(132.905,-157.85,-4.E-02)); +#390997 = LINE('',#390998,#390999); +#390998 = CARTESIAN_POINT('',(132.905,-157.85,-4.E-02)); +#390999 = VECTOR('',#391000,1.); +#391000 = DIRECTION('',(-0.,1.,0.)); +#391001 = ORIENTED_EDGE('',*,*,#391002,.T.); +#391002 = EDGE_CURVE('',#390995,#391003,#391005,.T.); +#391003 = VERTEX_POINT('',#391004); +#391004 = CARTESIAN_POINT('',(133.455,-157.85,-4.E-02)); +#391005 = CIRCLE('',#391006,0.275); +#391006 = AXIS2_PLACEMENT_3D('',#391007,#391008,#391009); +#391007 = CARTESIAN_POINT('',(133.18,-157.85,-4.E-02)); +#391008 = DIRECTION('',(0.,-0.,-1.)); +#391009 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#391010 = ORIENTED_EDGE('',*,*,#391011,.T.); +#391011 = EDGE_CURVE('',#391003,#390984,#391012,.T.); +#391012 = LINE('',#391013,#391014); +#391013 = CARTESIAN_POINT('',(133.455,-158.15,-4.E-02)); +#391014 = VECTOR('',#391015,1.); +#391015 = DIRECTION('',(0.,-1.,0.)); +#391016 = PLANE('',#391017); +#391017 = AXIS2_PLACEMENT_3D('',#391018,#391019,#391020); +#391018 = CARTESIAN_POINT('',(132.88,-157.85,-4.E-02)); +#391019 = DIRECTION('',(0.,0.,1.)); +#391020 = DIRECTION('',(1.,0.,-0.)); +#391021 = ADVANCED_FACE('',(#391022,#391033),#391069,.T.); +#391022 = FACE_BOUND('',#391023,.T.); +#391023 = EDGE_LOOP('',(#391024,#391025,#391026,#391032)); +#391024 = ORIENTED_EDGE('',*,*,#390876,.T.); +#391025 = ORIENTED_EDGE('',*,*,#390940,.T.); +#391026 = ORIENTED_EDGE('',*,*,#391027,.T.); +#391027 = EDGE_CURVE('',#390941,#390909,#391028,.T.); +#391028 = LINE('',#391029,#391030); +#391029 = CARTESIAN_POINT('',(133.48,-158.45,1.55)); +#391030 = VECTOR('',#391031,1.); +#391031 = DIRECTION('',(0.,1.,0.)); +#391032 = ORIENTED_EDGE('',*,*,#390916,.T.); +#391033 = FACE_BOUND('',#391034,.T.); +#391034 = EDGE_LOOP('',(#391035,#391046,#391054,#391063)); +#391035 = ORIENTED_EDGE('',*,*,#391036,.T.); +#391036 = EDGE_CURVE('',#391037,#391039,#391041,.T.); +#391037 = VERTEX_POINT('',#391038); +#391038 = CARTESIAN_POINT('',(133.455,-158.45,1.55)); +#391039 = VERTEX_POINT('',#391040); +#391040 = CARTESIAN_POINT('',(132.905,-158.45,1.55)); +#391041 = CIRCLE('',#391042,0.275); +#391042 = AXIS2_PLACEMENT_3D('',#391043,#391044,#391045); +#391043 = CARTESIAN_POINT('',(133.18,-158.45,1.55)); +#391044 = DIRECTION('',(-0.,0.,-1.)); +#391045 = DIRECTION('',(-1.,0.,0.)); +#391046 = ORIENTED_EDGE('',*,*,#391047,.T.); +#391047 = EDGE_CURVE('',#391039,#391048,#391050,.T.); +#391048 = VERTEX_POINT('',#391049); +#391049 = CARTESIAN_POINT('',(132.905,-157.85,1.55)); +#391050 = LINE('',#391051,#391052); +#391051 = CARTESIAN_POINT('',(132.905,-157.85,1.55)); +#391052 = VECTOR('',#391053,1.); +#391053 = DIRECTION('',(-0.,1.,0.)); +#391054 = ORIENTED_EDGE('',*,*,#391055,.T.); +#391055 = EDGE_CURVE('',#391048,#391056,#391058,.T.); +#391056 = VERTEX_POINT('',#391057); +#391057 = CARTESIAN_POINT('',(133.455,-157.85,1.55)); +#391058 = CIRCLE('',#391059,0.275); +#391059 = AXIS2_PLACEMENT_3D('',#391060,#391061,#391062); +#391060 = CARTESIAN_POINT('',(133.18,-157.85,1.55)); +#391061 = DIRECTION('',(0.,-0.,-1.)); +#391062 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#391063 = ORIENTED_EDGE('',*,*,#391064,.T.); +#391064 = EDGE_CURVE('',#391056,#391037,#391065,.T.); +#391065 = LINE('',#391066,#391067); +#391066 = CARTESIAN_POINT('',(133.455,-158.15,1.55)); +#391067 = VECTOR('',#391068,1.); +#391068 = DIRECTION('',(0.,-1.,0.)); +#391069 = PLANE('',#391070); +#391070 = AXIS2_PLACEMENT_3D('',#391071,#391072,#391073); +#391071 = CARTESIAN_POINT('',(132.88,-157.85,1.55)); +#391072 = DIRECTION('',(0.,0.,1.)); +#391073 = DIRECTION('',(1.,0.,-0.)); +#391074 = ADVANCED_FACE('',(#391075),#391081,.F.); +#391075 = FACE_BOUND('',#391076,.F.); +#391076 = EDGE_LOOP('',(#391077,#391078,#391079,#391080)); +#391077 = ORIENTED_EDGE('',*,*,#390949,.T.); +#391078 = ORIENTED_EDGE('',*,*,#391027,.T.); +#391079 = ORIENTED_EDGE('',*,*,#390906,.F.); +#391080 = ORIENTED_EDGE('',*,*,#390974,.F.); +#391081 = PLANE('',#391082); +#391082 = AXIS2_PLACEMENT_3D('',#391083,#391084,#391085); +#391083 = CARTESIAN_POINT('',(133.48,-158.45,-4.E-02)); +#391084 = DIRECTION('',(-1.,0.,0.)); +#391085 = DIRECTION('',(0.,1.,0.)); +#391086 = ADVANCED_FACE('',(#391087),#391103,.F.); +#391087 = FACE_BOUND('',#391088,.T.); +#391088 = EDGE_LOOP('',(#391089,#391090,#391096,#391097)); +#391089 = ORIENTED_EDGE('',*,*,#390983,.T.); +#391090 = ORIENTED_EDGE('',*,*,#391091,.T.); +#391091 = EDGE_CURVE('',#390986,#391039,#391092,.T.); +#391092 = LINE('',#391093,#391094); +#391093 = CARTESIAN_POINT('',(132.905,-158.45,-4.6E-02)); +#391094 = VECTOR('',#391095,1.); +#391095 = DIRECTION('',(0.,0.,1.)); +#391096 = ORIENTED_EDGE('',*,*,#391036,.F.); +#391097 = ORIENTED_EDGE('',*,*,#391098,.F.); +#391098 = EDGE_CURVE('',#390984,#391037,#391099,.T.); +#391099 = LINE('',#391100,#391101); +#391100 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#391101 = VECTOR('',#391102,1.); +#391102 = DIRECTION('',(0.,0.,1.)); +#391103 = CYLINDRICAL_SURFACE('',#391104,0.275); +#391104 = AXIS2_PLACEMENT_3D('',#391105,#391106,#391107); +#391105 = CARTESIAN_POINT('',(133.18,-158.45,-4.6E-02)); +#391106 = DIRECTION('',(-0.,-0.,-1.)); +#391107 = DIRECTION('',(-1.,0.,-0.)); +#391108 = ADVANCED_FACE('',(#391109),#391120,.T.); +#391109 = FACE_BOUND('',#391110,.T.); +#391110 = EDGE_LOOP('',(#391111,#391112,#391113,#391114)); +#391111 = ORIENTED_EDGE('',*,*,#391011,.T.); +#391112 = ORIENTED_EDGE('',*,*,#391098,.T.); +#391113 = ORIENTED_EDGE('',*,*,#391064,.F.); +#391114 = ORIENTED_EDGE('',*,*,#391115,.F.); +#391115 = EDGE_CURVE('',#391003,#391056,#391116,.T.); +#391116 = LINE('',#391117,#391118); +#391117 = CARTESIAN_POINT('',(133.455,-157.85,-4.6E-02)); +#391118 = VECTOR('',#391119,1.); +#391119 = DIRECTION('',(0.,0.,1.)); +#391120 = PLANE('',#391121); +#391121 = AXIS2_PLACEMENT_3D('',#391122,#391123,#391124); +#391122 = CARTESIAN_POINT('',(133.455,-158.45,-4.6E-02)); +#391123 = DIRECTION('',(-1.,0.,0.)); +#391124 = DIRECTION('',(0.,1.,0.)); +#391125 = ADVANCED_FACE('',(#391126),#391137,.F.); +#391126 = FACE_BOUND('',#391127,.T.); +#391127 = EDGE_LOOP('',(#391128,#391129,#391130,#391131)); +#391128 = ORIENTED_EDGE('',*,*,#391002,.T.); +#391129 = ORIENTED_EDGE('',*,*,#391115,.T.); +#391130 = ORIENTED_EDGE('',*,*,#391055,.F.); +#391131 = ORIENTED_EDGE('',*,*,#391132,.F.); +#391132 = EDGE_CURVE('',#390995,#391048,#391133,.T.); +#391133 = LINE('',#391134,#391135); +#391134 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#391135 = VECTOR('',#391136,1.); +#391136 = DIRECTION('',(0.,0.,1.)); +#391137 = CYLINDRICAL_SURFACE('',#391138,0.275); +#391138 = AXIS2_PLACEMENT_3D('',#391139,#391140,#391141); +#391139 = CARTESIAN_POINT('',(133.18,-157.85,-4.6E-02)); +#391140 = DIRECTION('',(-0.,-0.,-1.)); +#391141 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#391142 = ADVANCED_FACE('',(#391143),#391149,.T.); +#391143 = FACE_BOUND('',#391144,.T.); +#391144 = EDGE_LOOP('',(#391145,#391146,#391147,#391148)); +#391145 = ORIENTED_EDGE('',*,*,#390994,.T.); +#391146 = ORIENTED_EDGE('',*,*,#391132,.T.); +#391147 = ORIENTED_EDGE('',*,*,#391047,.F.); +#391148 = ORIENTED_EDGE('',*,*,#391091,.F.); +#391149 = PLANE('',#391150); +#391150 = AXIS2_PLACEMENT_3D('',#391151,#391152,#391153); +#391151 = CARTESIAN_POINT('',(132.905,-157.85,-4.6E-02)); +#391152 = DIRECTION('',(1.,0.,-0.)); +#391153 = DIRECTION('',(0.,-1.,0.)); +#391154 = MANIFOLD_SOLID_BREP('',#391155); +#391155 = CLOSED_SHELL('',(#391156,#391198,#391229,#391260,#391314, + #391368,#391380,#391402,#391419,#391436)); +#391156 = ADVANCED_FACE('',(#391157),#391193,.T.); +#391157 = FACE_BOUND('',#391158,.T.); +#391158 = EDGE_LOOP('',(#391159,#391169,#391178,#391186)); +#391159 = ORIENTED_EDGE('',*,*,#391160,.T.); +#391160 = EDGE_CURVE('',#391161,#391163,#391165,.T.); +#391161 = VERTEX_POINT('',#391162); +#391162 = CARTESIAN_POINT('',(142.32,-154.52,1.51)); +#391163 = VERTEX_POINT('',#391164); +#391164 = CARTESIAN_POINT('',(142.32,-154.52,1.55)); +#391165 = LINE('',#391166,#391167); +#391166 = CARTESIAN_POINT('',(142.32,-154.52,1.51)); +#391167 = VECTOR('',#391168,1.); +#391168 = DIRECTION('',(0.,0.,1.)); +#391169 = ORIENTED_EDGE('',*,*,#391170,.T.); +#391170 = EDGE_CURVE('',#391163,#391171,#391173,.T.); +#391171 = VERTEX_POINT('',#391172); +#391172 = CARTESIAN_POINT('',(141.32,-154.52,1.55)); +#391173 = CIRCLE('',#391174,0.5); +#391174 = AXIS2_PLACEMENT_3D('',#391175,#391176,#391177); +#391175 = CARTESIAN_POINT('',(141.82,-154.5199995566,1.55)); +#391176 = DIRECTION('',(-0.,0.,-1.)); +#391177 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391178 = ORIENTED_EDGE('',*,*,#391179,.F.); +#391179 = EDGE_CURVE('',#391180,#391171,#391182,.T.); +#391180 = VERTEX_POINT('',#391181); +#391181 = CARTESIAN_POINT('',(141.32,-154.52,1.51)); +#391182 = LINE('',#391183,#391184); +#391183 = CARTESIAN_POINT('',(141.32,-154.52,1.51)); +#391184 = VECTOR('',#391185,1.); +#391185 = DIRECTION('',(0.,0.,1.)); +#391186 = ORIENTED_EDGE('',*,*,#391187,.F.); +#391187 = EDGE_CURVE('',#391161,#391180,#391188,.T.); +#391188 = CIRCLE('',#391189,0.5); +#391189 = AXIS2_PLACEMENT_3D('',#391190,#391191,#391192); +#391190 = CARTESIAN_POINT('',(141.82,-154.5199995566,1.51)); +#391191 = DIRECTION('',(-0.,0.,-1.)); +#391192 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391193 = CYLINDRICAL_SURFACE('',#391194,0.5); +#391194 = AXIS2_PLACEMENT_3D('',#391195,#391196,#391197); +#391195 = CARTESIAN_POINT('',(141.82,-154.5199995566,1.51)); +#391196 = DIRECTION('',(-0.,0.,-1.)); +#391197 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391198 = ADVANCED_FACE('',(#391199),#391224,.T.); +#391199 = FACE_BOUND('',#391200,.T.); +#391200 = EDGE_LOOP('',(#391201,#391211,#391217,#391218)); +#391201 = ORIENTED_EDGE('',*,*,#391202,.T.); +#391202 = EDGE_CURVE('',#391203,#391205,#391207,.T.); +#391203 = VERTEX_POINT('',#391204); +#391204 = CARTESIAN_POINT('',(142.32,-153.42,1.51)); +#391205 = VERTEX_POINT('',#391206); +#391206 = CARTESIAN_POINT('',(142.32,-153.42,1.55)); +#391207 = LINE('',#391208,#391209); +#391208 = CARTESIAN_POINT('',(142.32,-153.42,1.51)); +#391209 = VECTOR('',#391210,1.); +#391210 = DIRECTION('',(0.,0.,1.)); +#391211 = ORIENTED_EDGE('',*,*,#391212,.T.); +#391212 = EDGE_CURVE('',#391205,#391163,#391213,.T.); +#391213 = LINE('',#391214,#391215); +#391214 = CARTESIAN_POINT('',(142.32,-153.42,1.55)); +#391215 = VECTOR('',#391216,1.); +#391216 = DIRECTION('',(0.,-1.,0.)); +#391217 = ORIENTED_EDGE('',*,*,#391160,.F.); +#391218 = ORIENTED_EDGE('',*,*,#391219,.F.); +#391219 = EDGE_CURVE('',#391203,#391161,#391220,.T.); +#391220 = LINE('',#391221,#391222); +#391221 = CARTESIAN_POINT('',(142.32,-153.42,1.51)); +#391222 = VECTOR('',#391223,1.); +#391223 = DIRECTION('',(0.,-1.,0.)); +#391224 = PLANE('',#391225); +#391225 = AXIS2_PLACEMENT_3D('',#391226,#391227,#391228); +#391226 = CARTESIAN_POINT('',(142.32,-153.42,1.51)); +#391227 = DIRECTION('',(1.,0.,-0.)); +#391228 = DIRECTION('',(0.,-1.,0.)); +#391229 = ADVANCED_FACE('',(#391230),#391255,.T.); +#391230 = FACE_BOUND('',#391231,.T.); +#391231 = EDGE_LOOP('',(#391232,#391233,#391241,#391249)); +#391232 = ORIENTED_EDGE('',*,*,#391179,.T.); +#391233 = ORIENTED_EDGE('',*,*,#391234,.T.); +#391234 = EDGE_CURVE('',#391171,#391235,#391237,.T.); +#391235 = VERTEX_POINT('',#391236); +#391236 = CARTESIAN_POINT('',(141.32,-153.42,1.55)); +#391237 = LINE('',#391238,#391239); +#391238 = CARTESIAN_POINT('',(141.32,-154.52,1.55)); +#391239 = VECTOR('',#391240,1.); +#391240 = DIRECTION('',(0.,1.,0.)); +#391241 = ORIENTED_EDGE('',*,*,#391242,.F.); +#391242 = EDGE_CURVE('',#391243,#391235,#391245,.T.); +#391243 = VERTEX_POINT('',#391244); +#391244 = CARTESIAN_POINT('',(141.32,-153.42,1.51)); +#391245 = LINE('',#391246,#391247); +#391246 = CARTESIAN_POINT('',(141.32,-153.42,1.51)); +#391247 = VECTOR('',#391248,1.); +#391248 = DIRECTION('',(0.,0.,1.)); +#391249 = ORIENTED_EDGE('',*,*,#391250,.F.); +#391250 = EDGE_CURVE('',#391180,#391243,#391251,.T.); +#391251 = LINE('',#391252,#391253); +#391252 = CARTESIAN_POINT('',(141.32,-154.52,1.51)); +#391253 = VECTOR('',#391254,1.); +#391254 = DIRECTION('',(0.,1.,0.)); +#391255 = PLANE('',#391256); +#391256 = AXIS2_PLACEMENT_3D('',#391257,#391258,#391259); +#391257 = CARTESIAN_POINT('',(141.32,-154.52,1.51)); +#391258 = DIRECTION('',(-1.,0.,0.)); +#391259 = DIRECTION('',(0.,1.,0.)); +#391260 = ADVANCED_FACE('',(#391261,#391273),#391309,.F.); +#391261 = FACE_BOUND('',#391262,.F.); +#391262 = EDGE_LOOP('',(#391263,#391264,#391265,#391272)); +#391263 = ORIENTED_EDGE('',*,*,#391187,.F.); +#391264 = ORIENTED_EDGE('',*,*,#391219,.F.); +#391265 = ORIENTED_EDGE('',*,*,#391266,.F.); +#391266 = EDGE_CURVE('',#391243,#391203,#391267,.T.); +#391267 = CIRCLE('',#391268,0.500000000001); +#391268 = AXIS2_PLACEMENT_3D('',#391269,#391270,#391271); +#391269 = CARTESIAN_POINT('',(141.82,-153.4199991518,1.51)); +#391270 = DIRECTION('',(0.,0.,-1.)); +#391271 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391272 = ORIENTED_EDGE('',*,*,#391250,.F.); +#391273 = FACE_BOUND('',#391274,.F.); +#391274 = EDGE_LOOP('',(#391275,#391286,#391294,#391303)); +#391275 = ORIENTED_EDGE('',*,*,#391276,.T.); +#391276 = EDGE_CURVE('',#391277,#391279,#391281,.T.); +#391277 = VERTEX_POINT('',#391278); +#391278 = CARTESIAN_POINT('',(142.095,-154.52,1.51)); +#391279 = VERTEX_POINT('',#391280); +#391280 = CARTESIAN_POINT('',(141.545,-154.52,1.51)); +#391281 = CIRCLE('',#391282,0.275); +#391282 = AXIS2_PLACEMENT_3D('',#391283,#391284,#391285); +#391283 = CARTESIAN_POINT('',(141.82,-154.52,1.51)); +#391284 = DIRECTION('',(-0.,0.,-1.)); +#391285 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391286 = ORIENTED_EDGE('',*,*,#391287,.T.); +#391287 = EDGE_CURVE('',#391279,#391288,#391290,.T.); +#391288 = VERTEX_POINT('',#391289); +#391289 = CARTESIAN_POINT('',(141.545,-153.42,1.51)); +#391290 = LINE('',#391291,#391292); +#391291 = CARTESIAN_POINT('',(141.545,-76.71,1.51)); +#391292 = VECTOR('',#391293,1.); +#391293 = DIRECTION('',(-0.,1.,0.)); +#391294 = ORIENTED_EDGE('',*,*,#391295,.T.); +#391295 = EDGE_CURVE('',#391288,#391296,#391298,.T.); +#391296 = VERTEX_POINT('',#391297); +#391297 = CARTESIAN_POINT('',(142.095,-153.42,1.51)); +#391298 = CIRCLE('',#391299,0.275); +#391299 = AXIS2_PLACEMENT_3D('',#391300,#391301,#391302); +#391300 = CARTESIAN_POINT('',(141.82,-153.42,1.51)); +#391301 = DIRECTION('',(0.,-0.,-1.)); +#391302 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391303 = ORIENTED_EDGE('',*,*,#391304,.T.); +#391304 = EDGE_CURVE('',#391296,#391277,#391305,.T.); +#391305 = LINE('',#391306,#391307); +#391306 = CARTESIAN_POINT('',(142.095,-77.26,1.51)); +#391307 = VECTOR('',#391308,1.); +#391308 = DIRECTION('',(0.,-1.,0.)); +#391309 = PLANE('',#391310); +#391310 = AXIS2_PLACEMENT_3D('',#391311,#391312,#391313); +#391311 = CARTESIAN_POINT('',(0.,0.,1.51)); +#391312 = DIRECTION('',(0.,0.,1.)); +#391313 = DIRECTION('',(1.,0.,-0.)); +#391314 = ADVANCED_FACE('',(#391315,#391327),#391363,.T.); +#391315 = FACE_BOUND('',#391316,.T.); +#391316 = EDGE_LOOP('',(#391317,#391318,#391319,#391326)); +#391317 = ORIENTED_EDGE('',*,*,#391170,.F.); +#391318 = ORIENTED_EDGE('',*,*,#391212,.F.); +#391319 = ORIENTED_EDGE('',*,*,#391320,.F.); +#391320 = EDGE_CURVE('',#391235,#391205,#391321,.T.); +#391321 = CIRCLE('',#391322,0.500000000001); +#391322 = AXIS2_PLACEMENT_3D('',#391323,#391324,#391325); +#391323 = CARTESIAN_POINT('',(141.82,-153.4199991518,1.55)); +#391324 = DIRECTION('',(0.,0.,-1.)); +#391325 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391326 = ORIENTED_EDGE('',*,*,#391234,.F.); +#391327 = FACE_BOUND('',#391328,.T.); +#391328 = EDGE_LOOP('',(#391329,#391340,#391348,#391357)); +#391329 = ORIENTED_EDGE('',*,*,#391330,.T.); +#391330 = EDGE_CURVE('',#391331,#391333,#391335,.T.); +#391331 = VERTEX_POINT('',#391332); +#391332 = CARTESIAN_POINT('',(142.095,-154.52,1.55)); +#391333 = VERTEX_POINT('',#391334); +#391334 = CARTESIAN_POINT('',(141.545,-154.52,1.55)); +#391335 = CIRCLE('',#391336,0.275); +#391336 = AXIS2_PLACEMENT_3D('',#391337,#391338,#391339); +#391337 = CARTESIAN_POINT('',(141.82,-154.52,1.55)); +#391338 = DIRECTION('',(-0.,0.,-1.)); +#391339 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391340 = ORIENTED_EDGE('',*,*,#391341,.T.); +#391341 = EDGE_CURVE('',#391333,#391342,#391344,.T.); +#391342 = VERTEX_POINT('',#391343); +#391343 = CARTESIAN_POINT('',(141.545,-153.42,1.55)); +#391344 = LINE('',#391345,#391346); +#391345 = CARTESIAN_POINT('',(141.545,-76.71,1.55)); +#391346 = VECTOR('',#391347,1.); +#391347 = DIRECTION('',(-0.,1.,0.)); +#391348 = ORIENTED_EDGE('',*,*,#391349,.T.); +#391349 = EDGE_CURVE('',#391342,#391350,#391352,.T.); +#391350 = VERTEX_POINT('',#391351); +#391351 = CARTESIAN_POINT('',(142.095,-153.42,1.55)); +#391352 = CIRCLE('',#391353,0.275); +#391353 = AXIS2_PLACEMENT_3D('',#391354,#391355,#391356); +#391354 = CARTESIAN_POINT('',(141.82,-153.42,1.55)); +#391355 = DIRECTION('',(0.,-0.,-1.)); +#391356 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391357 = ORIENTED_EDGE('',*,*,#391358,.T.); +#391358 = EDGE_CURVE('',#391350,#391331,#391359,.T.); +#391359 = LINE('',#391360,#391361); +#391360 = CARTESIAN_POINT('',(142.095,-77.26,1.55)); +#391361 = VECTOR('',#391362,1.); +#391362 = DIRECTION('',(0.,-1.,0.)); +#391363 = PLANE('',#391364); +#391364 = AXIS2_PLACEMENT_3D('',#391365,#391366,#391367); +#391365 = CARTESIAN_POINT('',(0.,0.,1.55)); +#391366 = DIRECTION('',(0.,0.,1.)); +#391367 = DIRECTION('',(1.,0.,-0.)); +#391368 = ADVANCED_FACE('',(#391369),#391375,.T.); +#391369 = FACE_BOUND('',#391370,.T.); +#391370 = EDGE_LOOP('',(#391371,#391372,#391373,#391374)); +#391371 = ORIENTED_EDGE('',*,*,#391242,.T.); +#391372 = ORIENTED_EDGE('',*,*,#391320,.T.); +#391373 = ORIENTED_EDGE('',*,*,#391202,.F.); +#391374 = ORIENTED_EDGE('',*,*,#391266,.F.); +#391375 = CYLINDRICAL_SURFACE('',#391376,0.500000000001); +#391376 = AXIS2_PLACEMENT_3D('',#391377,#391378,#391379); +#391377 = CARTESIAN_POINT('',(141.82,-153.4199991518,1.51)); +#391378 = DIRECTION('',(0.,0.,-1.)); +#391379 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391380 = ADVANCED_FACE('',(#391381),#391397,.F.); +#391381 = FACE_BOUND('',#391382,.T.); +#391382 = EDGE_LOOP('',(#391383,#391384,#391390,#391391)); +#391383 = ORIENTED_EDGE('',*,*,#391276,.T.); +#391384 = ORIENTED_EDGE('',*,*,#391385,.T.); +#391385 = EDGE_CURVE('',#391279,#391333,#391386,.T.); +#391386 = LINE('',#391387,#391388); +#391387 = CARTESIAN_POINT('',(141.545,-154.52,-4.6E-02)); +#391388 = VECTOR('',#391389,1.); +#391389 = DIRECTION('',(0.,0.,1.)); +#391390 = ORIENTED_EDGE('',*,*,#391330,.F.); +#391391 = ORIENTED_EDGE('',*,*,#391392,.F.); +#391392 = EDGE_CURVE('',#391277,#391331,#391393,.T.); +#391393 = LINE('',#391394,#391395); +#391394 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#391395 = VECTOR('',#391396,1.); +#391396 = DIRECTION('',(0.,0.,1.)); +#391397 = CYLINDRICAL_SURFACE('',#391398,0.275); +#391398 = AXIS2_PLACEMENT_3D('',#391399,#391400,#391401); +#391399 = CARTESIAN_POINT('',(141.82,-154.52,-4.6E-02)); +#391400 = DIRECTION('',(-0.,-0.,-1.)); +#391401 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391402 = ADVANCED_FACE('',(#391403),#391414,.T.); +#391403 = FACE_BOUND('',#391404,.T.); +#391404 = EDGE_LOOP('',(#391405,#391406,#391407,#391408)); +#391405 = ORIENTED_EDGE('',*,*,#391304,.T.); +#391406 = ORIENTED_EDGE('',*,*,#391392,.T.); +#391407 = ORIENTED_EDGE('',*,*,#391358,.F.); +#391408 = ORIENTED_EDGE('',*,*,#391409,.F.); +#391409 = EDGE_CURVE('',#391296,#391350,#391410,.T.); +#391410 = LINE('',#391411,#391412); +#391411 = CARTESIAN_POINT('',(142.095,-153.42,-4.6E-02)); +#391412 = VECTOR('',#391413,1.); +#391413 = DIRECTION('',(0.,0.,1.)); +#391414 = PLANE('',#391415); +#391415 = AXIS2_PLACEMENT_3D('',#391416,#391417,#391418); +#391416 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#391417 = DIRECTION('',(-1.,0.,0.)); +#391418 = DIRECTION('',(0.,1.,0.)); +#391419 = ADVANCED_FACE('',(#391420),#391431,.F.); +#391420 = FACE_BOUND('',#391421,.T.); +#391421 = EDGE_LOOP('',(#391422,#391423,#391424,#391425)); +#391422 = ORIENTED_EDGE('',*,*,#391295,.T.); +#391423 = ORIENTED_EDGE('',*,*,#391409,.T.); +#391424 = ORIENTED_EDGE('',*,*,#391349,.F.); +#391425 = ORIENTED_EDGE('',*,*,#391426,.F.); +#391426 = EDGE_CURVE('',#391288,#391342,#391427,.T.); +#391427 = LINE('',#391428,#391429); +#391428 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#391429 = VECTOR('',#391430,1.); +#391430 = DIRECTION('',(0.,0.,1.)); +#391431 = CYLINDRICAL_SURFACE('',#391432,0.275); +#391432 = AXIS2_PLACEMENT_3D('',#391433,#391434,#391435); +#391433 = CARTESIAN_POINT('',(141.82,-153.42,-4.6E-02)); +#391434 = DIRECTION('',(-0.,-0.,-1.)); +#391435 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391436 = ADVANCED_FACE('',(#391437),#391443,.T.); +#391437 = FACE_BOUND('',#391438,.T.); +#391438 = EDGE_LOOP('',(#391439,#391440,#391441,#391442)); +#391439 = ORIENTED_EDGE('',*,*,#391287,.T.); +#391440 = ORIENTED_EDGE('',*,*,#391426,.T.); +#391441 = ORIENTED_EDGE('',*,*,#391341,.F.); +#391442 = ORIENTED_EDGE('',*,*,#391385,.F.); +#391443 = PLANE('',#391444); +#391444 = AXIS2_PLACEMENT_3D('',#391445,#391446,#391447); +#391445 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#391446 = DIRECTION('',(1.,0.,-0.)); +#391447 = DIRECTION('',(0.,-1.,0.)); +#391448 = MANIFOLD_SOLID_BREP('',#391449); +#391449 = CLOSED_SHELL('',(#391450,#391492,#391523,#391554,#391608, + #391662,#391674,#391696,#391713,#391730)); +#391450 = ADVANCED_FACE('',(#391451),#391487,.T.); +#391451 = FACE_BOUND('',#391452,.F.); +#391452 = EDGE_LOOP('',(#391453,#391463,#391472,#391480)); +#391453 = ORIENTED_EDGE('',*,*,#391454,.T.); +#391454 = EDGE_CURVE('',#391455,#391457,#391459,.T.); +#391455 = VERTEX_POINT('',#391456); +#391456 = CARTESIAN_POINT('',(142.32,-154.52,0.)); +#391457 = VERTEX_POINT('',#391458); +#391458 = CARTESIAN_POINT('',(142.32,-154.52,-4.E-02)); +#391459 = LINE('',#391460,#391461); +#391460 = CARTESIAN_POINT('',(142.32,-154.52,0.)); +#391461 = VECTOR('',#391462,1.); +#391462 = DIRECTION('',(0.,0.,-1.)); +#391463 = ORIENTED_EDGE('',*,*,#391464,.T.); +#391464 = EDGE_CURVE('',#391457,#391465,#391467,.T.); +#391465 = VERTEX_POINT('',#391466); +#391466 = CARTESIAN_POINT('',(141.32,-154.52,-4.E-02)); +#391467 = CIRCLE('',#391468,0.5); +#391468 = AXIS2_PLACEMENT_3D('',#391469,#391470,#391471); +#391469 = CARTESIAN_POINT('',(141.82,-154.5199995566,-4.E-02)); +#391470 = DIRECTION('',(-0.,0.,-1.)); +#391471 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391472 = ORIENTED_EDGE('',*,*,#391473,.F.); +#391473 = EDGE_CURVE('',#391474,#391465,#391476,.T.); +#391474 = VERTEX_POINT('',#391475); +#391475 = CARTESIAN_POINT('',(141.32,-154.52,0.)); +#391476 = LINE('',#391477,#391478); +#391477 = CARTESIAN_POINT('',(141.32,-154.52,0.)); +#391478 = VECTOR('',#391479,1.); +#391479 = DIRECTION('',(0.,0.,-1.)); +#391480 = ORIENTED_EDGE('',*,*,#391481,.F.); +#391481 = EDGE_CURVE('',#391455,#391474,#391482,.T.); +#391482 = CIRCLE('',#391483,0.5); +#391483 = AXIS2_PLACEMENT_3D('',#391484,#391485,#391486); +#391484 = CARTESIAN_POINT('',(141.82,-154.5199995566,0.)); +#391485 = DIRECTION('',(-0.,0.,-1.)); +#391486 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391487 = CYLINDRICAL_SURFACE('',#391488,0.5); +#391488 = AXIS2_PLACEMENT_3D('',#391489,#391490,#391491); +#391489 = CARTESIAN_POINT('',(141.82,-154.5199995566,0.)); +#391490 = DIRECTION('',(0.,-0.,1.)); +#391491 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#391492 = ADVANCED_FACE('',(#391493),#391518,.F.); +#391493 = FACE_BOUND('',#391494,.F.); +#391494 = EDGE_LOOP('',(#391495,#391505,#391511,#391512)); +#391495 = ORIENTED_EDGE('',*,*,#391496,.T.); +#391496 = EDGE_CURVE('',#391497,#391499,#391501,.T.); +#391497 = VERTEX_POINT('',#391498); +#391498 = CARTESIAN_POINT('',(142.32,-153.42,0.)); +#391499 = VERTEX_POINT('',#391500); +#391500 = CARTESIAN_POINT('',(142.32,-153.42,-4.E-02)); +#391501 = LINE('',#391502,#391503); +#391502 = CARTESIAN_POINT('',(142.32,-153.42,0.)); +#391503 = VECTOR('',#391504,1.); +#391504 = DIRECTION('',(0.,0.,-1.)); +#391505 = ORIENTED_EDGE('',*,*,#391506,.T.); +#391506 = EDGE_CURVE('',#391499,#391457,#391507,.T.); +#391507 = LINE('',#391508,#391509); +#391508 = CARTESIAN_POINT('',(142.32,-153.42,-4.E-02)); +#391509 = VECTOR('',#391510,1.); +#391510 = DIRECTION('',(0.,-1.,0.)); +#391511 = ORIENTED_EDGE('',*,*,#391454,.F.); +#391512 = ORIENTED_EDGE('',*,*,#391513,.F.); +#391513 = EDGE_CURVE('',#391497,#391455,#391514,.T.); +#391514 = LINE('',#391515,#391516); +#391515 = CARTESIAN_POINT('',(142.32,-153.42,0.)); +#391516 = VECTOR('',#391517,1.); +#391517 = DIRECTION('',(0.,-1.,0.)); +#391518 = PLANE('',#391519); +#391519 = AXIS2_PLACEMENT_3D('',#391520,#391521,#391522); +#391520 = CARTESIAN_POINT('',(142.32,-153.42,0.)); +#391521 = DIRECTION('',(-1.,-0.,-0.)); +#391522 = DIRECTION('',(0.,-1.,0.)); +#391523 = ADVANCED_FACE('',(#391524),#391549,.F.); +#391524 = FACE_BOUND('',#391525,.F.); +#391525 = EDGE_LOOP('',(#391526,#391527,#391535,#391543)); +#391526 = ORIENTED_EDGE('',*,*,#391473,.T.); +#391527 = ORIENTED_EDGE('',*,*,#391528,.T.); +#391528 = EDGE_CURVE('',#391465,#391529,#391531,.T.); +#391529 = VERTEX_POINT('',#391530); +#391530 = CARTESIAN_POINT('',(141.32,-153.42,-4.E-02)); +#391531 = LINE('',#391532,#391533); +#391532 = CARTESIAN_POINT('',(141.32,-154.52,-4.E-02)); +#391533 = VECTOR('',#391534,1.); +#391534 = DIRECTION('',(0.,1.,0.)); +#391535 = ORIENTED_EDGE('',*,*,#391536,.F.); +#391536 = EDGE_CURVE('',#391537,#391529,#391539,.T.); +#391537 = VERTEX_POINT('',#391538); +#391538 = CARTESIAN_POINT('',(141.32,-153.42,0.)); +#391539 = LINE('',#391540,#391541); +#391540 = CARTESIAN_POINT('',(141.32,-153.42,0.)); +#391541 = VECTOR('',#391542,1.); +#391542 = DIRECTION('',(0.,0.,-1.)); +#391543 = ORIENTED_EDGE('',*,*,#391544,.F.); +#391544 = EDGE_CURVE('',#391474,#391537,#391545,.T.); +#391545 = LINE('',#391546,#391547); +#391546 = CARTESIAN_POINT('',(141.32,-154.52,0.)); +#391547 = VECTOR('',#391548,1.); +#391548 = DIRECTION('',(0.,1.,0.)); +#391549 = PLANE('',#391550); +#391550 = AXIS2_PLACEMENT_3D('',#391551,#391552,#391553); +#391551 = CARTESIAN_POINT('',(141.32,-154.52,0.)); +#391552 = DIRECTION('',(1.,-0.,0.)); +#391553 = DIRECTION('',(0.,1.,0.)); +#391554 = ADVANCED_FACE('',(#391555,#391567),#391603,.F.); +#391555 = FACE_BOUND('',#391556,.F.); +#391556 = EDGE_LOOP('',(#391557,#391558,#391559,#391566)); +#391557 = ORIENTED_EDGE('',*,*,#391481,.T.); +#391558 = ORIENTED_EDGE('',*,*,#391544,.T.); +#391559 = ORIENTED_EDGE('',*,*,#391560,.T.); +#391560 = EDGE_CURVE('',#391537,#391497,#391561,.T.); +#391561 = CIRCLE('',#391562,0.500000000001); +#391562 = AXIS2_PLACEMENT_3D('',#391563,#391564,#391565); +#391563 = CARTESIAN_POINT('',(141.82,-153.4199991518,0.)); +#391564 = DIRECTION('',(0.,0.,-1.)); +#391565 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391566 = ORIENTED_EDGE('',*,*,#391513,.T.); +#391567 = FACE_BOUND('',#391568,.F.); +#391568 = EDGE_LOOP('',(#391569,#391580,#391588,#391597)); +#391569 = ORIENTED_EDGE('',*,*,#391570,.F.); +#391570 = EDGE_CURVE('',#391571,#391573,#391575,.T.); +#391571 = VERTEX_POINT('',#391572); +#391572 = CARTESIAN_POINT('',(141.545,-153.42,0.)); +#391573 = VERTEX_POINT('',#391574); +#391574 = CARTESIAN_POINT('',(142.095,-153.42,0.)); +#391575 = CIRCLE('',#391576,0.275); +#391576 = AXIS2_PLACEMENT_3D('',#391577,#391578,#391579); +#391577 = CARTESIAN_POINT('',(141.82,-153.42,0.)); +#391578 = DIRECTION('',(0.,-0.,-1.)); +#391579 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391580 = ORIENTED_EDGE('',*,*,#391581,.T.); +#391581 = EDGE_CURVE('',#391571,#391582,#391584,.T.); +#391582 = VERTEX_POINT('',#391583); +#391583 = CARTESIAN_POINT('',(141.545,-154.52,0.)); +#391584 = LINE('',#391585,#391586); +#391585 = CARTESIAN_POINT('',(141.545,-76.71,0.)); +#391586 = VECTOR('',#391587,1.); +#391587 = DIRECTION('',(0.,-1.,0.)); +#391588 = ORIENTED_EDGE('',*,*,#391589,.F.); +#391589 = EDGE_CURVE('',#391590,#391582,#391592,.T.); +#391590 = VERTEX_POINT('',#391591); +#391591 = CARTESIAN_POINT('',(142.095,-154.52,0.)); +#391592 = CIRCLE('',#391593,0.275); +#391593 = AXIS2_PLACEMENT_3D('',#391594,#391595,#391596); +#391594 = CARTESIAN_POINT('',(141.82,-154.52,0.)); +#391595 = DIRECTION('',(-0.,0.,-1.)); +#391596 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391597 = ORIENTED_EDGE('',*,*,#391598,.T.); +#391598 = EDGE_CURVE('',#391590,#391573,#391599,.T.); +#391599 = LINE('',#391600,#391601); +#391600 = CARTESIAN_POINT('',(142.095,-77.26,0.)); +#391601 = VECTOR('',#391602,1.); +#391602 = DIRECTION('',(0.,1.,-0.)); +#391603 = PLANE('',#391604); +#391604 = AXIS2_PLACEMENT_3D('',#391605,#391606,#391607); +#391605 = CARTESIAN_POINT('',(0.,0.,0.)); +#391606 = DIRECTION('',(-0.,-0.,-1.)); +#391607 = DIRECTION('',(-1.,0.,0.)); +#391608 = ADVANCED_FACE('',(#391609,#391621),#391657,.T.); +#391609 = FACE_BOUND('',#391610,.T.); +#391610 = EDGE_LOOP('',(#391611,#391612,#391613,#391620)); +#391611 = ORIENTED_EDGE('',*,*,#391464,.T.); +#391612 = ORIENTED_EDGE('',*,*,#391528,.T.); +#391613 = ORIENTED_EDGE('',*,*,#391614,.T.); +#391614 = EDGE_CURVE('',#391529,#391499,#391615,.T.); +#391615 = CIRCLE('',#391616,0.500000000001); +#391616 = AXIS2_PLACEMENT_3D('',#391617,#391618,#391619); +#391617 = CARTESIAN_POINT('',(141.82,-153.4199991518,-4.E-02)); +#391618 = DIRECTION('',(0.,0.,-1.)); +#391619 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391620 = ORIENTED_EDGE('',*,*,#391506,.T.); +#391621 = FACE_BOUND('',#391622,.T.); +#391622 = EDGE_LOOP('',(#391623,#391634,#391642,#391651)); +#391623 = ORIENTED_EDGE('',*,*,#391624,.F.); +#391624 = EDGE_CURVE('',#391625,#391627,#391629,.T.); +#391625 = VERTEX_POINT('',#391626); +#391626 = CARTESIAN_POINT('',(141.545,-153.42,-4.E-02)); +#391627 = VERTEX_POINT('',#391628); +#391628 = CARTESIAN_POINT('',(142.095,-153.42,-4.E-02)); +#391629 = CIRCLE('',#391630,0.275); +#391630 = AXIS2_PLACEMENT_3D('',#391631,#391632,#391633); +#391631 = CARTESIAN_POINT('',(141.82,-153.42,-4.E-02)); +#391632 = DIRECTION('',(0.,-0.,-1.)); +#391633 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391634 = ORIENTED_EDGE('',*,*,#391635,.T.); +#391635 = EDGE_CURVE('',#391625,#391636,#391638,.T.); +#391636 = VERTEX_POINT('',#391637); +#391637 = CARTESIAN_POINT('',(141.545,-154.52,-4.E-02)); +#391638 = LINE('',#391639,#391640); +#391639 = CARTESIAN_POINT('',(141.545,-76.71,-4.E-02)); +#391640 = VECTOR('',#391641,1.); +#391641 = DIRECTION('',(0.,-1.,0.)); +#391642 = ORIENTED_EDGE('',*,*,#391643,.F.); +#391643 = EDGE_CURVE('',#391644,#391636,#391646,.T.); +#391644 = VERTEX_POINT('',#391645); +#391645 = CARTESIAN_POINT('',(142.095,-154.52,-4.E-02)); +#391646 = CIRCLE('',#391647,0.275); +#391647 = AXIS2_PLACEMENT_3D('',#391648,#391649,#391650); +#391648 = CARTESIAN_POINT('',(141.82,-154.52,-4.E-02)); +#391649 = DIRECTION('',(-0.,0.,-1.)); +#391650 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391651 = ORIENTED_EDGE('',*,*,#391652,.T.); +#391652 = EDGE_CURVE('',#391644,#391627,#391653,.T.); +#391653 = LINE('',#391654,#391655); +#391654 = CARTESIAN_POINT('',(142.095,-77.26,-4.E-02)); +#391655 = VECTOR('',#391656,1.); +#391656 = DIRECTION('',(0.,1.,-0.)); +#391657 = PLANE('',#391658); +#391658 = AXIS2_PLACEMENT_3D('',#391659,#391660,#391661); +#391659 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#391660 = DIRECTION('',(-0.,-0.,-1.)); +#391661 = DIRECTION('',(-1.,0.,0.)); +#391662 = ADVANCED_FACE('',(#391663),#391669,.T.); +#391663 = FACE_BOUND('',#391664,.F.); +#391664 = EDGE_LOOP('',(#391665,#391666,#391667,#391668)); +#391665 = ORIENTED_EDGE('',*,*,#391536,.T.); +#391666 = ORIENTED_EDGE('',*,*,#391614,.T.); +#391667 = ORIENTED_EDGE('',*,*,#391496,.F.); +#391668 = ORIENTED_EDGE('',*,*,#391560,.F.); +#391669 = CYLINDRICAL_SURFACE('',#391670,0.500000000001); +#391670 = AXIS2_PLACEMENT_3D('',#391671,#391672,#391673); +#391671 = CARTESIAN_POINT('',(141.82,-153.4199991518,0.)); +#391672 = DIRECTION('',(-0.,-0.,1.)); +#391673 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#391674 = ADVANCED_FACE('',(#391675),#391691,.F.); +#391675 = FACE_BOUND('',#391676,.T.); +#391676 = EDGE_LOOP('',(#391677,#391678,#391684,#391685)); +#391677 = ORIENTED_EDGE('',*,*,#391624,.T.); +#391678 = ORIENTED_EDGE('',*,*,#391679,.T.); +#391679 = EDGE_CURVE('',#391627,#391573,#391680,.T.); +#391680 = LINE('',#391681,#391682); +#391681 = CARTESIAN_POINT('',(142.095,-153.42,-4.6E-02)); +#391682 = VECTOR('',#391683,1.); +#391683 = DIRECTION('',(0.,0.,1.)); +#391684 = ORIENTED_EDGE('',*,*,#391570,.F.); +#391685 = ORIENTED_EDGE('',*,*,#391686,.F.); +#391686 = EDGE_CURVE('',#391625,#391571,#391687,.T.); +#391687 = LINE('',#391688,#391689); +#391688 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#391689 = VECTOR('',#391690,1.); +#391690 = DIRECTION('',(0.,0.,1.)); +#391691 = CYLINDRICAL_SURFACE('',#391692,0.275); +#391692 = AXIS2_PLACEMENT_3D('',#391693,#391694,#391695); +#391693 = CARTESIAN_POINT('',(141.82,-153.42,-4.6E-02)); +#391694 = DIRECTION('',(-0.,-0.,-1.)); +#391695 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391696 = ADVANCED_FACE('',(#391697),#391708,.T.); +#391697 = FACE_BOUND('',#391698,.T.); +#391698 = EDGE_LOOP('',(#391699,#391700,#391706,#391707)); +#391699 = ORIENTED_EDGE('',*,*,#391652,.F.); +#391700 = ORIENTED_EDGE('',*,*,#391701,.T.); +#391701 = EDGE_CURVE('',#391644,#391590,#391702,.T.); +#391702 = LINE('',#391703,#391704); +#391703 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#391704 = VECTOR('',#391705,1.); +#391705 = DIRECTION('',(0.,0.,1.)); +#391706 = ORIENTED_EDGE('',*,*,#391598,.T.); +#391707 = ORIENTED_EDGE('',*,*,#391679,.F.); +#391708 = PLANE('',#391709); +#391709 = AXIS2_PLACEMENT_3D('',#391710,#391711,#391712); +#391710 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#391711 = DIRECTION('',(-1.,0.,0.)); +#391712 = DIRECTION('',(0.,1.,0.)); +#391713 = ADVANCED_FACE('',(#391714),#391725,.F.); +#391714 = FACE_BOUND('',#391715,.T.); +#391715 = EDGE_LOOP('',(#391716,#391717,#391723,#391724)); +#391716 = ORIENTED_EDGE('',*,*,#391643,.T.); +#391717 = ORIENTED_EDGE('',*,*,#391718,.T.); +#391718 = EDGE_CURVE('',#391636,#391582,#391719,.T.); +#391719 = LINE('',#391720,#391721); +#391720 = CARTESIAN_POINT('',(141.545,-154.52,-4.6E-02)); +#391721 = VECTOR('',#391722,1.); +#391722 = DIRECTION('',(0.,0.,1.)); +#391723 = ORIENTED_EDGE('',*,*,#391589,.F.); +#391724 = ORIENTED_EDGE('',*,*,#391701,.F.); +#391725 = CYLINDRICAL_SURFACE('',#391726,0.275); +#391726 = AXIS2_PLACEMENT_3D('',#391727,#391728,#391729); +#391727 = CARTESIAN_POINT('',(141.82,-154.52,-4.6E-02)); +#391728 = DIRECTION('',(-0.,-0.,-1.)); +#391729 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391730 = ADVANCED_FACE('',(#391731),#391737,.T.); +#391731 = FACE_BOUND('',#391732,.T.); +#391732 = EDGE_LOOP('',(#391733,#391734,#391735,#391736)); +#391733 = ORIENTED_EDGE('',*,*,#391635,.F.); +#391734 = ORIENTED_EDGE('',*,*,#391686,.T.); +#391735 = ORIENTED_EDGE('',*,*,#391581,.T.); +#391736 = ORIENTED_EDGE('',*,*,#391718,.F.); +#391737 = PLANE('',#391738); +#391738 = AXIS2_PLACEMENT_3D('',#391739,#391740,#391741); +#391739 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#391740 = DIRECTION('',(1.,0.,-0.)); +#391741 = DIRECTION('',(0.,-1.,0.)); +#391742 = MANIFOLD_SOLID_BREP('',#391743); +#391743 = CLOSED_SHELL('',(#391744,#391784,#391817,#391850,#391903, + #391956,#391968,#391990,#392007,#392024)); +#391744 = ADVANCED_FACE('',(#391745),#391779,.F.); +#391745 = FACE_BOUND('',#391746,.F.); +#391746 = EDGE_LOOP('',(#391747,#391757,#391765,#391773)); +#391747 = ORIENTED_EDGE('',*,*,#391748,.T.); +#391748 = EDGE_CURVE('',#391749,#391751,#391753,.T.); +#391749 = VERTEX_POINT('',#391750); +#391750 = CARTESIAN_POINT('',(141.52,-153.42,-4.E-02)); +#391751 = VERTEX_POINT('',#391752); +#391752 = CARTESIAN_POINT('',(141.52,-153.42,1.55)); +#391753 = LINE('',#391754,#391755); +#391754 = CARTESIAN_POINT('',(141.52,-153.42,-4.E-02)); +#391755 = VECTOR('',#391756,1.); +#391756 = DIRECTION('',(0.,0.,1.)); +#391757 = ORIENTED_EDGE('',*,*,#391758,.T.); +#391758 = EDGE_CURVE('',#391751,#391759,#391761,.T.); +#391759 = VERTEX_POINT('',#391760); +#391760 = CARTESIAN_POINT('',(141.52,-154.52,1.55)); +#391761 = LINE('',#391762,#391763); +#391762 = CARTESIAN_POINT('',(141.52,-153.42,1.55)); +#391763 = VECTOR('',#391764,1.); +#391764 = DIRECTION('',(0.,-1.,0.)); +#391765 = ORIENTED_EDGE('',*,*,#391766,.F.); +#391766 = EDGE_CURVE('',#391767,#391759,#391769,.T.); +#391767 = VERTEX_POINT('',#391768); +#391768 = CARTESIAN_POINT('',(141.52,-154.52,-4.E-02)); +#391769 = LINE('',#391770,#391771); +#391770 = CARTESIAN_POINT('',(141.52,-154.52,-4.E-02)); +#391771 = VECTOR('',#391772,1.); +#391772 = DIRECTION('',(0.,0.,1.)); +#391773 = ORIENTED_EDGE('',*,*,#391774,.F.); +#391774 = EDGE_CURVE('',#391749,#391767,#391775,.T.); +#391775 = LINE('',#391776,#391777); +#391776 = CARTESIAN_POINT('',(141.52,-153.42,-4.E-02)); +#391777 = VECTOR('',#391778,1.); +#391778 = DIRECTION('',(0.,-1.,0.)); +#391779 = PLANE('',#391780); +#391780 = AXIS2_PLACEMENT_3D('',#391781,#391782,#391783); +#391781 = CARTESIAN_POINT('',(141.52,-153.42,-4.E-02)); +#391782 = DIRECTION('',(1.,0.,-0.)); +#391783 = DIRECTION('',(0.,-1.,0.)); +#391784 = ADVANCED_FACE('',(#391785),#391812,.T.); +#391785 = FACE_BOUND('',#391786,.F.); +#391786 = EDGE_LOOP('',(#391787,#391797,#391804,#391805)); +#391787 = ORIENTED_EDGE('',*,*,#391788,.T.); +#391788 = EDGE_CURVE('',#391789,#391791,#391793,.T.); +#391789 = VERTEX_POINT('',#391790); +#391790 = CARTESIAN_POINT('',(142.12,-153.42,-4.E-02)); +#391791 = VERTEX_POINT('',#391792); +#391792 = CARTESIAN_POINT('',(142.12,-153.42,1.55)); +#391793 = LINE('',#391794,#391795); +#391794 = CARTESIAN_POINT('',(142.12,-153.42,-4.E-02)); +#391795 = VECTOR('',#391796,1.); +#391796 = DIRECTION('',(0.,0.,1.)); +#391797 = ORIENTED_EDGE('',*,*,#391798,.T.); +#391798 = EDGE_CURVE('',#391791,#391751,#391799,.T.); +#391799 = CIRCLE('',#391800,0.3); +#391800 = AXIS2_PLACEMENT_3D('',#391801,#391802,#391803); +#391801 = CARTESIAN_POINT('',(141.82,-153.42,1.55)); +#391802 = DIRECTION('',(0.,0.,1.)); +#391803 = DIRECTION('',(1.,0.,-0.)); +#391804 = ORIENTED_EDGE('',*,*,#391748,.F.); +#391805 = ORIENTED_EDGE('',*,*,#391806,.F.); +#391806 = EDGE_CURVE('',#391789,#391749,#391807,.T.); +#391807 = CIRCLE('',#391808,0.3); +#391808 = AXIS2_PLACEMENT_3D('',#391809,#391810,#391811); +#391809 = CARTESIAN_POINT('',(141.82,-153.42,-4.E-02)); +#391810 = DIRECTION('',(0.,0.,1.)); +#391811 = DIRECTION('',(1.,0.,-0.)); +#391812 = CYLINDRICAL_SURFACE('',#391813,0.3); +#391813 = AXIS2_PLACEMENT_3D('',#391814,#391815,#391816); +#391814 = CARTESIAN_POINT('',(141.82,-153.42,-4.E-02)); +#391815 = DIRECTION('',(-0.,-0.,-1.)); +#391816 = DIRECTION('',(1.,0.,-0.)); +#391817 = ADVANCED_FACE('',(#391818),#391845,.T.); +#391818 = FACE_BOUND('',#391819,.F.); +#391819 = EDGE_LOOP('',(#391820,#391821,#391830,#391838)); +#391820 = ORIENTED_EDGE('',*,*,#391766,.T.); +#391821 = ORIENTED_EDGE('',*,*,#391822,.T.); +#391822 = EDGE_CURVE('',#391759,#391823,#391825,.T.); +#391823 = VERTEX_POINT('',#391824); +#391824 = CARTESIAN_POINT('',(142.12,-154.52,1.55)); +#391825 = CIRCLE('',#391826,0.3); +#391826 = AXIS2_PLACEMENT_3D('',#391827,#391828,#391829); +#391827 = CARTESIAN_POINT('',(141.82,-154.52,1.55)); +#391828 = DIRECTION('',(0.,0.,1.)); +#391829 = DIRECTION('',(-1.,0.,-0.)); +#391830 = ORIENTED_EDGE('',*,*,#391831,.F.); +#391831 = EDGE_CURVE('',#391832,#391823,#391834,.T.); +#391832 = VERTEX_POINT('',#391833); +#391833 = CARTESIAN_POINT('',(142.12,-154.52,-4.E-02)); +#391834 = LINE('',#391835,#391836); +#391835 = CARTESIAN_POINT('',(142.12,-154.52,-4.E-02)); +#391836 = VECTOR('',#391837,1.); +#391837 = DIRECTION('',(0.,0.,1.)); +#391838 = ORIENTED_EDGE('',*,*,#391839,.F.); +#391839 = EDGE_CURVE('',#391767,#391832,#391840,.T.); +#391840 = CIRCLE('',#391841,0.3); +#391841 = AXIS2_PLACEMENT_3D('',#391842,#391843,#391844); +#391842 = CARTESIAN_POINT('',(141.82,-154.52,-4.E-02)); +#391843 = DIRECTION('',(0.,0.,1.)); +#391844 = DIRECTION('',(-1.,0.,-0.)); +#391845 = CYLINDRICAL_SURFACE('',#391846,0.3); +#391846 = AXIS2_PLACEMENT_3D('',#391847,#391848,#391849); +#391847 = CARTESIAN_POINT('',(141.82,-154.52,-4.E-02)); +#391848 = DIRECTION('',(-0.,-0.,-1.)); +#391849 = DIRECTION('',(-1.,0.,-0.)); +#391850 = ADVANCED_FACE('',(#391851,#391862),#391898,.F.); +#391851 = FACE_BOUND('',#391852,.F.); +#391852 = EDGE_LOOP('',(#391853,#391854,#391855,#391861)); +#391853 = ORIENTED_EDGE('',*,*,#391774,.T.); +#391854 = ORIENTED_EDGE('',*,*,#391839,.T.); +#391855 = ORIENTED_EDGE('',*,*,#391856,.T.); +#391856 = EDGE_CURVE('',#391832,#391789,#391857,.T.); +#391857 = LINE('',#391858,#391859); +#391858 = CARTESIAN_POINT('',(142.12,-154.52,-4.E-02)); +#391859 = VECTOR('',#391860,1.); +#391860 = DIRECTION('',(0.,1.,0.)); +#391861 = ORIENTED_EDGE('',*,*,#391806,.T.); +#391862 = FACE_BOUND('',#391863,.F.); +#391863 = EDGE_LOOP('',(#391864,#391875,#391883,#391892)); +#391864 = ORIENTED_EDGE('',*,*,#391865,.T.); +#391865 = EDGE_CURVE('',#391866,#391868,#391870,.T.); +#391866 = VERTEX_POINT('',#391867); +#391867 = CARTESIAN_POINT('',(142.095,-154.52,-4.E-02)); +#391868 = VERTEX_POINT('',#391869); +#391869 = CARTESIAN_POINT('',(141.545,-154.52,-4.E-02)); +#391870 = CIRCLE('',#391871,0.275); +#391871 = AXIS2_PLACEMENT_3D('',#391872,#391873,#391874); +#391872 = CARTESIAN_POINT('',(141.82,-154.52,-4.E-02)); +#391873 = DIRECTION('',(-0.,0.,-1.)); +#391874 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391875 = ORIENTED_EDGE('',*,*,#391876,.T.); +#391876 = EDGE_CURVE('',#391868,#391877,#391879,.T.); +#391877 = VERTEX_POINT('',#391878); +#391878 = CARTESIAN_POINT('',(141.545,-153.42,-4.E-02)); +#391879 = LINE('',#391880,#391881); +#391880 = CARTESIAN_POINT('',(141.545,-153.42,-4.E-02)); +#391881 = VECTOR('',#391882,1.); +#391882 = DIRECTION('',(-0.,1.,0.)); +#391883 = ORIENTED_EDGE('',*,*,#391884,.T.); +#391884 = EDGE_CURVE('',#391877,#391885,#391887,.T.); +#391885 = VERTEX_POINT('',#391886); +#391886 = CARTESIAN_POINT('',(142.095,-153.42,-4.E-02)); +#391887 = CIRCLE('',#391888,0.275); +#391888 = AXIS2_PLACEMENT_3D('',#391889,#391890,#391891); +#391889 = CARTESIAN_POINT('',(141.82,-153.42,-4.E-02)); +#391890 = DIRECTION('',(0.,-0.,-1.)); +#391891 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391892 = ORIENTED_EDGE('',*,*,#391893,.T.); +#391893 = EDGE_CURVE('',#391885,#391866,#391894,.T.); +#391894 = LINE('',#391895,#391896); +#391895 = CARTESIAN_POINT('',(142.095,-153.97,-4.E-02)); +#391896 = VECTOR('',#391897,1.); +#391897 = DIRECTION('',(0.,-1.,0.)); +#391898 = PLANE('',#391899); +#391899 = AXIS2_PLACEMENT_3D('',#391900,#391901,#391902); +#391900 = CARTESIAN_POINT('',(141.52,-153.42,-4.E-02)); +#391901 = DIRECTION('',(0.,0.,1.)); +#391902 = DIRECTION('',(1.,0.,-0.)); +#391903 = ADVANCED_FACE('',(#391904,#391915),#391951,.T.); +#391904 = FACE_BOUND('',#391905,.T.); +#391905 = EDGE_LOOP('',(#391906,#391907,#391908,#391914)); +#391906 = ORIENTED_EDGE('',*,*,#391758,.T.); +#391907 = ORIENTED_EDGE('',*,*,#391822,.T.); +#391908 = ORIENTED_EDGE('',*,*,#391909,.T.); +#391909 = EDGE_CURVE('',#391823,#391791,#391910,.T.); +#391910 = LINE('',#391911,#391912); +#391911 = CARTESIAN_POINT('',(142.12,-154.52,1.55)); +#391912 = VECTOR('',#391913,1.); +#391913 = DIRECTION('',(0.,1.,0.)); +#391914 = ORIENTED_EDGE('',*,*,#391798,.T.); +#391915 = FACE_BOUND('',#391916,.T.); +#391916 = EDGE_LOOP('',(#391917,#391928,#391936,#391945)); +#391917 = ORIENTED_EDGE('',*,*,#391918,.T.); +#391918 = EDGE_CURVE('',#391919,#391921,#391923,.T.); +#391919 = VERTEX_POINT('',#391920); +#391920 = CARTESIAN_POINT('',(142.095,-154.52,1.55)); +#391921 = VERTEX_POINT('',#391922); +#391922 = CARTESIAN_POINT('',(141.545,-154.52,1.55)); +#391923 = CIRCLE('',#391924,0.275); +#391924 = AXIS2_PLACEMENT_3D('',#391925,#391926,#391927); +#391925 = CARTESIAN_POINT('',(141.82,-154.52,1.55)); +#391926 = DIRECTION('',(-0.,0.,-1.)); +#391927 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391928 = ORIENTED_EDGE('',*,*,#391929,.T.); +#391929 = EDGE_CURVE('',#391921,#391930,#391932,.T.); +#391930 = VERTEX_POINT('',#391931); +#391931 = CARTESIAN_POINT('',(141.545,-153.42,1.55)); +#391932 = LINE('',#391933,#391934); +#391933 = CARTESIAN_POINT('',(141.545,-153.42,1.55)); +#391934 = VECTOR('',#391935,1.); +#391935 = DIRECTION('',(-0.,1.,0.)); +#391936 = ORIENTED_EDGE('',*,*,#391937,.T.); +#391937 = EDGE_CURVE('',#391930,#391938,#391940,.T.); +#391938 = VERTEX_POINT('',#391939); +#391939 = CARTESIAN_POINT('',(142.095,-153.42,1.55)); +#391940 = CIRCLE('',#391941,0.275); +#391941 = AXIS2_PLACEMENT_3D('',#391942,#391943,#391944); +#391942 = CARTESIAN_POINT('',(141.82,-153.42,1.55)); +#391943 = DIRECTION('',(0.,-0.,-1.)); +#391944 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#391945 = ORIENTED_EDGE('',*,*,#391946,.T.); +#391946 = EDGE_CURVE('',#391938,#391919,#391947,.T.); +#391947 = LINE('',#391948,#391949); +#391948 = CARTESIAN_POINT('',(142.095,-153.97,1.55)); +#391949 = VECTOR('',#391950,1.); +#391950 = DIRECTION('',(0.,-1.,0.)); +#391951 = PLANE('',#391952); +#391952 = AXIS2_PLACEMENT_3D('',#391953,#391954,#391955); +#391953 = CARTESIAN_POINT('',(141.52,-153.42,1.55)); +#391954 = DIRECTION('',(0.,0.,1.)); +#391955 = DIRECTION('',(1.,0.,-0.)); +#391956 = ADVANCED_FACE('',(#391957),#391963,.F.); +#391957 = FACE_BOUND('',#391958,.F.); +#391958 = EDGE_LOOP('',(#391959,#391960,#391961,#391962)); +#391959 = ORIENTED_EDGE('',*,*,#391831,.T.); +#391960 = ORIENTED_EDGE('',*,*,#391909,.T.); +#391961 = ORIENTED_EDGE('',*,*,#391788,.F.); +#391962 = ORIENTED_EDGE('',*,*,#391856,.F.); +#391963 = PLANE('',#391964); +#391964 = AXIS2_PLACEMENT_3D('',#391965,#391966,#391967); +#391965 = CARTESIAN_POINT('',(142.12,-154.52,-4.E-02)); +#391966 = DIRECTION('',(-1.,0.,0.)); +#391967 = DIRECTION('',(0.,1.,0.)); +#391968 = ADVANCED_FACE('',(#391969),#391985,.F.); +#391969 = FACE_BOUND('',#391970,.T.); +#391970 = EDGE_LOOP('',(#391971,#391972,#391978,#391979)); +#391971 = ORIENTED_EDGE('',*,*,#391865,.T.); +#391972 = ORIENTED_EDGE('',*,*,#391973,.T.); +#391973 = EDGE_CURVE('',#391868,#391921,#391974,.T.); +#391974 = LINE('',#391975,#391976); +#391975 = CARTESIAN_POINT('',(141.545,-154.52,-4.6E-02)); +#391976 = VECTOR('',#391977,1.); +#391977 = DIRECTION('',(0.,0.,1.)); +#391978 = ORIENTED_EDGE('',*,*,#391918,.F.); +#391979 = ORIENTED_EDGE('',*,*,#391980,.F.); +#391980 = EDGE_CURVE('',#391866,#391919,#391981,.T.); +#391981 = LINE('',#391982,#391983); +#391982 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#391983 = VECTOR('',#391984,1.); +#391984 = DIRECTION('',(0.,0.,1.)); +#391985 = CYLINDRICAL_SURFACE('',#391986,0.275); +#391986 = AXIS2_PLACEMENT_3D('',#391987,#391988,#391989); +#391987 = CARTESIAN_POINT('',(141.82,-154.52,-4.6E-02)); +#391988 = DIRECTION('',(-0.,-0.,-1.)); +#391989 = DIRECTION('',(-1.,-1.03351670656E-13,0.)); +#391990 = ADVANCED_FACE('',(#391991),#392002,.T.); +#391991 = FACE_BOUND('',#391992,.T.); +#391992 = EDGE_LOOP('',(#391993,#391994,#391995,#391996)); +#391993 = ORIENTED_EDGE('',*,*,#391893,.T.); +#391994 = ORIENTED_EDGE('',*,*,#391980,.T.); +#391995 = ORIENTED_EDGE('',*,*,#391946,.F.); +#391996 = ORIENTED_EDGE('',*,*,#391997,.F.); +#391997 = EDGE_CURVE('',#391885,#391938,#391998,.T.); +#391998 = LINE('',#391999,#392000); +#391999 = CARTESIAN_POINT('',(142.095,-153.42,-4.6E-02)); +#392000 = VECTOR('',#392001,1.); +#392001 = DIRECTION('',(0.,0.,1.)); +#392002 = PLANE('',#392003); +#392003 = AXIS2_PLACEMENT_3D('',#392004,#392005,#392006); +#392004 = CARTESIAN_POINT('',(142.095,-154.52,-4.6E-02)); +#392005 = DIRECTION('',(-1.,0.,0.)); +#392006 = DIRECTION('',(0.,1.,0.)); +#392007 = ADVANCED_FACE('',(#392008),#392019,.F.); +#392008 = FACE_BOUND('',#392009,.T.); +#392009 = EDGE_LOOP('',(#392010,#392011,#392012,#392013)); +#392010 = ORIENTED_EDGE('',*,*,#391884,.T.); +#392011 = ORIENTED_EDGE('',*,*,#391997,.T.); +#392012 = ORIENTED_EDGE('',*,*,#391937,.F.); +#392013 = ORIENTED_EDGE('',*,*,#392014,.F.); +#392014 = EDGE_CURVE('',#391877,#391930,#392015,.T.); +#392015 = LINE('',#392016,#392017); +#392016 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#392017 = VECTOR('',#392018,1.); +#392018 = DIRECTION('',(0.,0.,1.)); +#392019 = CYLINDRICAL_SURFACE('',#392020,0.275); +#392020 = AXIS2_PLACEMENT_3D('',#392021,#392022,#392023); +#392021 = CARTESIAN_POINT('',(141.82,-153.42,-4.6E-02)); +#392022 = DIRECTION('',(-0.,-0.,-1.)); +#392023 = DIRECTION('',(1.,1.03351670656E-13,-0.)); +#392024 = ADVANCED_FACE('',(#392025),#392031,.T.); +#392025 = FACE_BOUND('',#392026,.T.); +#392026 = EDGE_LOOP('',(#392027,#392028,#392029,#392030)); +#392027 = ORIENTED_EDGE('',*,*,#391876,.T.); +#392028 = ORIENTED_EDGE('',*,*,#392014,.T.); +#392029 = ORIENTED_EDGE('',*,*,#391929,.F.); +#392030 = ORIENTED_EDGE('',*,*,#391973,.F.); +#392031 = PLANE('',#392032); +#392032 = AXIS2_PLACEMENT_3D('',#392033,#392034,#392035); +#392033 = CARTESIAN_POINT('',(141.545,-153.42,-4.6E-02)); +#392034 = DIRECTION('',(1.,0.,-0.)); +#392035 = DIRECTION('',(0.,-1.,0.)); +#392036 = MANIFOLD_SOLID_BREP('',#392037); +#392037 = CLOSED_SHELL('',(#392038,#392080,#392111,#392142,#392196, + #392250,#392262,#392284,#392301,#392318)); +#392038 = ADVANCED_FACE('',(#392039),#392075,.T.); +#392039 = FACE_BOUND('',#392040,.T.); +#392040 = EDGE_LOOP('',(#392041,#392051,#392060,#392068)); +#392041 = ORIENTED_EDGE('',*,*,#392042,.T.); +#392042 = EDGE_CURVE('',#392043,#392045,#392047,.T.); +#392043 = VERTEX_POINT('',#392044); +#392044 = CARTESIAN_POINT('',(142.32,-158.45,1.51)); +#392045 = VERTEX_POINT('',#392046); +#392046 = CARTESIAN_POINT('',(142.32,-158.45,1.55)); +#392047 = LINE('',#392048,#392049); +#392048 = CARTESIAN_POINT('',(142.32,-158.45,1.51)); +#392049 = VECTOR('',#392050,1.); +#392050 = DIRECTION('',(0.,0.,1.)); +#392051 = ORIENTED_EDGE('',*,*,#392052,.T.); +#392052 = EDGE_CURVE('',#392045,#392053,#392055,.T.); +#392053 = VERTEX_POINT('',#392054); +#392054 = CARTESIAN_POINT('',(141.32,-158.45,1.55)); +#392055 = CIRCLE('',#392056,0.5); +#392056 = AXIS2_PLACEMENT_3D('',#392057,#392058,#392059); +#392057 = CARTESIAN_POINT('',(141.82,-158.4499995566,1.55)); +#392058 = DIRECTION('',(-0.,0.,-1.)); +#392059 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392060 = ORIENTED_EDGE('',*,*,#392061,.F.); +#392061 = EDGE_CURVE('',#392062,#392053,#392064,.T.); +#392062 = VERTEX_POINT('',#392063); +#392063 = CARTESIAN_POINT('',(141.32,-158.45,1.51)); +#392064 = LINE('',#392065,#392066); +#392065 = CARTESIAN_POINT('',(141.32,-158.45,1.51)); +#392066 = VECTOR('',#392067,1.); +#392067 = DIRECTION('',(0.,0.,1.)); +#392068 = ORIENTED_EDGE('',*,*,#392069,.F.); +#392069 = EDGE_CURVE('',#392043,#392062,#392070,.T.); +#392070 = CIRCLE('',#392071,0.5); +#392071 = AXIS2_PLACEMENT_3D('',#392072,#392073,#392074); +#392072 = CARTESIAN_POINT('',(141.82,-158.4499995566,1.51)); +#392073 = DIRECTION('',(-0.,0.,-1.)); +#392074 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392075 = CYLINDRICAL_SURFACE('',#392076,0.5); +#392076 = AXIS2_PLACEMENT_3D('',#392077,#392078,#392079); +#392077 = CARTESIAN_POINT('',(141.82,-158.4499995566,1.51)); +#392078 = DIRECTION('',(-0.,0.,-1.)); +#392079 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392080 = ADVANCED_FACE('',(#392081),#392106,.T.); +#392081 = FACE_BOUND('',#392082,.T.); +#392082 = EDGE_LOOP('',(#392083,#392093,#392099,#392100)); +#392083 = ORIENTED_EDGE('',*,*,#392084,.T.); +#392084 = EDGE_CURVE('',#392085,#392087,#392089,.T.); +#392085 = VERTEX_POINT('',#392086); +#392086 = CARTESIAN_POINT('',(142.32,-157.85,1.51)); +#392087 = VERTEX_POINT('',#392088); +#392088 = CARTESIAN_POINT('',(142.32,-157.85,1.55)); +#392089 = LINE('',#392090,#392091); +#392090 = CARTESIAN_POINT('',(142.32,-157.85,1.51)); +#392091 = VECTOR('',#392092,1.); +#392092 = DIRECTION('',(0.,0.,1.)); +#392093 = ORIENTED_EDGE('',*,*,#392094,.T.); +#392094 = EDGE_CURVE('',#392087,#392045,#392095,.T.); +#392095 = LINE('',#392096,#392097); +#392096 = CARTESIAN_POINT('',(142.32,-157.85,1.55)); +#392097 = VECTOR('',#392098,1.); +#392098 = DIRECTION('',(0.,-1.,0.)); +#392099 = ORIENTED_EDGE('',*,*,#392042,.F.); +#392100 = ORIENTED_EDGE('',*,*,#392101,.F.); +#392101 = EDGE_CURVE('',#392085,#392043,#392102,.T.); +#392102 = LINE('',#392103,#392104); +#392103 = CARTESIAN_POINT('',(142.32,-157.85,1.51)); +#392104 = VECTOR('',#392105,1.); +#392105 = DIRECTION('',(0.,-1.,0.)); +#392106 = PLANE('',#392107); +#392107 = AXIS2_PLACEMENT_3D('',#392108,#392109,#392110); +#392108 = CARTESIAN_POINT('',(142.32,-157.85,1.51)); +#392109 = DIRECTION('',(1.,0.,-0.)); +#392110 = DIRECTION('',(0.,-1.,0.)); +#392111 = ADVANCED_FACE('',(#392112),#392137,.T.); +#392112 = FACE_BOUND('',#392113,.T.); +#392113 = EDGE_LOOP('',(#392114,#392115,#392123,#392131)); +#392114 = ORIENTED_EDGE('',*,*,#392061,.T.); +#392115 = ORIENTED_EDGE('',*,*,#392116,.T.); +#392116 = EDGE_CURVE('',#392053,#392117,#392119,.T.); +#392117 = VERTEX_POINT('',#392118); +#392118 = CARTESIAN_POINT('',(141.32,-157.85,1.55)); +#392119 = LINE('',#392120,#392121); +#392120 = CARTESIAN_POINT('',(141.32,-158.45,1.55)); +#392121 = VECTOR('',#392122,1.); +#392122 = DIRECTION('',(0.,1.,0.)); +#392123 = ORIENTED_EDGE('',*,*,#392124,.F.); +#392124 = EDGE_CURVE('',#392125,#392117,#392127,.T.); +#392125 = VERTEX_POINT('',#392126); +#392126 = CARTESIAN_POINT('',(141.32,-157.85,1.51)); +#392127 = LINE('',#392128,#392129); +#392128 = CARTESIAN_POINT('',(141.32,-157.85,1.51)); +#392129 = VECTOR('',#392130,1.); +#392130 = DIRECTION('',(0.,0.,1.)); +#392131 = ORIENTED_EDGE('',*,*,#392132,.F.); +#392132 = EDGE_CURVE('',#392062,#392125,#392133,.T.); +#392133 = LINE('',#392134,#392135); +#392134 = CARTESIAN_POINT('',(141.32,-158.45,1.51)); +#392135 = VECTOR('',#392136,1.); +#392136 = DIRECTION('',(0.,1.,0.)); +#392137 = PLANE('',#392138); +#392138 = AXIS2_PLACEMENT_3D('',#392139,#392140,#392141); +#392139 = CARTESIAN_POINT('',(141.32,-158.45,1.51)); +#392140 = DIRECTION('',(-1.,0.,0.)); +#392141 = DIRECTION('',(0.,1.,0.)); +#392142 = ADVANCED_FACE('',(#392143,#392155),#392191,.F.); +#392143 = FACE_BOUND('',#392144,.F.); +#392144 = EDGE_LOOP('',(#392145,#392146,#392147,#392154)); +#392145 = ORIENTED_EDGE('',*,*,#392069,.F.); +#392146 = ORIENTED_EDGE('',*,*,#392101,.F.); +#392147 = ORIENTED_EDGE('',*,*,#392148,.F.); +#392148 = EDGE_CURVE('',#392125,#392085,#392149,.T.); +#392149 = CIRCLE('',#392150,0.500000000001); +#392150 = AXIS2_PLACEMENT_3D('',#392151,#392152,#392153); +#392151 = CARTESIAN_POINT('',(141.82,-157.8499991518,1.51)); +#392152 = DIRECTION('',(0.,0.,-1.)); +#392153 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392154 = ORIENTED_EDGE('',*,*,#392132,.F.); +#392155 = FACE_BOUND('',#392156,.F.); +#392156 = EDGE_LOOP('',(#392157,#392168,#392176,#392185)); +#392157 = ORIENTED_EDGE('',*,*,#392158,.T.); +#392158 = EDGE_CURVE('',#392159,#392161,#392163,.T.); +#392159 = VERTEX_POINT('',#392160); +#392160 = CARTESIAN_POINT('',(142.095,-158.45,1.51)); +#392161 = VERTEX_POINT('',#392162); +#392162 = CARTESIAN_POINT('',(141.545,-158.45,1.51)); +#392163 = CIRCLE('',#392164,0.275); +#392164 = AXIS2_PLACEMENT_3D('',#392165,#392166,#392167); +#392165 = CARTESIAN_POINT('',(141.82,-158.45,1.51)); +#392166 = DIRECTION('',(-0.,0.,-1.)); +#392167 = DIRECTION('',(-1.,0.,0.)); +#392168 = ORIENTED_EDGE('',*,*,#392169,.T.); +#392169 = EDGE_CURVE('',#392161,#392170,#392172,.T.); +#392170 = VERTEX_POINT('',#392171); +#392171 = CARTESIAN_POINT('',(141.545,-157.85,1.51)); +#392172 = LINE('',#392173,#392174); +#392173 = CARTESIAN_POINT('',(141.545,-78.925,1.51)); +#392174 = VECTOR('',#392175,1.); +#392175 = DIRECTION('',(-0.,1.,0.)); +#392176 = ORIENTED_EDGE('',*,*,#392177,.T.); +#392177 = EDGE_CURVE('',#392170,#392178,#392180,.T.); +#392178 = VERTEX_POINT('',#392179); +#392179 = CARTESIAN_POINT('',(142.095,-157.85,1.51)); +#392180 = CIRCLE('',#392181,0.275); +#392181 = AXIS2_PLACEMENT_3D('',#392182,#392183,#392184); +#392182 = CARTESIAN_POINT('',(141.82,-157.85,1.51)); +#392183 = DIRECTION('',(0.,-0.,-1.)); +#392184 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392185 = ORIENTED_EDGE('',*,*,#392186,.T.); +#392186 = EDGE_CURVE('',#392178,#392159,#392187,.T.); +#392187 = LINE('',#392188,#392189); +#392188 = CARTESIAN_POINT('',(142.095,-79.225,1.51)); +#392189 = VECTOR('',#392190,1.); +#392190 = DIRECTION('',(0.,-1.,0.)); +#392191 = PLANE('',#392192); +#392192 = AXIS2_PLACEMENT_3D('',#392193,#392194,#392195); +#392193 = CARTESIAN_POINT('',(0.,0.,1.51)); +#392194 = DIRECTION('',(0.,0.,1.)); +#392195 = DIRECTION('',(1.,0.,-0.)); +#392196 = ADVANCED_FACE('',(#392197,#392209),#392245,.T.); +#392197 = FACE_BOUND('',#392198,.T.); +#392198 = EDGE_LOOP('',(#392199,#392200,#392201,#392208)); +#392199 = ORIENTED_EDGE('',*,*,#392052,.F.); +#392200 = ORIENTED_EDGE('',*,*,#392094,.F.); +#392201 = ORIENTED_EDGE('',*,*,#392202,.F.); +#392202 = EDGE_CURVE('',#392117,#392087,#392203,.T.); +#392203 = CIRCLE('',#392204,0.500000000001); +#392204 = AXIS2_PLACEMENT_3D('',#392205,#392206,#392207); +#392205 = CARTESIAN_POINT('',(141.82,-157.8499991518,1.55)); +#392206 = DIRECTION('',(0.,0.,-1.)); +#392207 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392208 = ORIENTED_EDGE('',*,*,#392116,.F.); +#392209 = FACE_BOUND('',#392210,.T.); +#392210 = EDGE_LOOP('',(#392211,#392222,#392230,#392239)); +#392211 = ORIENTED_EDGE('',*,*,#392212,.T.); +#392212 = EDGE_CURVE('',#392213,#392215,#392217,.T.); +#392213 = VERTEX_POINT('',#392214); +#392214 = CARTESIAN_POINT('',(142.095,-158.45,1.55)); +#392215 = VERTEX_POINT('',#392216); +#392216 = CARTESIAN_POINT('',(141.545,-158.45,1.55)); +#392217 = CIRCLE('',#392218,0.275); +#392218 = AXIS2_PLACEMENT_3D('',#392219,#392220,#392221); +#392219 = CARTESIAN_POINT('',(141.82,-158.45,1.55)); +#392220 = DIRECTION('',(-0.,0.,-1.)); +#392221 = DIRECTION('',(-1.,0.,0.)); +#392222 = ORIENTED_EDGE('',*,*,#392223,.T.); +#392223 = EDGE_CURVE('',#392215,#392224,#392226,.T.); +#392224 = VERTEX_POINT('',#392225); +#392225 = CARTESIAN_POINT('',(141.545,-157.85,1.55)); +#392226 = LINE('',#392227,#392228); +#392227 = CARTESIAN_POINT('',(141.545,-78.925,1.55)); +#392228 = VECTOR('',#392229,1.); +#392229 = DIRECTION('',(-0.,1.,0.)); +#392230 = ORIENTED_EDGE('',*,*,#392231,.T.); +#392231 = EDGE_CURVE('',#392224,#392232,#392234,.T.); +#392232 = VERTEX_POINT('',#392233); +#392233 = CARTESIAN_POINT('',(142.095,-157.85,1.55)); +#392234 = CIRCLE('',#392235,0.275); +#392235 = AXIS2_PLACEMENT_3D('',#392236,#392237,#392238); +#392236 = CARTESIAN_POINT('',(141.82,-157.85,1.55)); +#392237 = DIRECTION('',(0.,-0.,-1.)); +#392238 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392239 = ORIENTED_EDGE('',*,*,#392240,.T.); +#392240 = EDGE_CURVE('',#392232,#392213,#392241,.T.); +#392241 = LINE('',#392242,#392243); +#392242 = CARTESIAN_POINT('',(142.095,-79.225,1.55)); +#392243 = VECTOR('',#392244,1.); +#392244 = DIRECTION('',(0.,-1.,0.)); +#392245 = PLANE('',#392246); +#392246 = AXIS2_PLACEMENT_3D('',#392247,#392248,#392249); +#392247 = CARTESIAN_POINT('',(0.,0.,1.55)); +#392248 = DIRECTION('',(0.,0.,1.)); +#392249 = DIRECTION('',(1.,0.,-0.)); +#392250 = ADVANCED_FACE('',(#392251),#392257,.T.); +#392251 = FACE_BOUND('',#392252,.T.); +#392252 = EDGE_LOOP('',(#392253,#392254,#392255,#392256)); +#392253 = ORIENTED_EDGE('',*,*,#392124,.T.); +#392254 = ORIENTED_EDGE('',*,*,#392202,.T.); +#392255 = ORIENTED_EDGE('',*,*,#392084,.F.); +#392256 = ORIENTED_EDGE('',*,*,#392148,.F.); +#392257 = CYLINDRICAL_SURFACE('',#392258,0.500000000001); +#392258 = AXIS2_PLACEMENT_3D('',#392259,#392260,#392261); +#392259 = CARTESIAN_POINT('',(141.82,-157.8499991518,1.51)); +#392260 = DIRECTION('',(0.,0.,-1.)); +#392261 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392262 = ADVANCED_FACE('',(#392263),#392279,.F.); +#392263 = FACE_BOUND('',#392264,.T.); +#392264 = EDGE_LOOP('',(#392265,#392266,#392272,#392273)); +#392265 = ORIENTED_EDGE('',*,*,#392158,.T.); +#392266 = ORIENTED_EDGE('',*,*,#392267,.T.); +#392267 = EDGE_CURVE('',#392161,#392215,#392268,.T.); +#392268 = LINE('',#392269,#392270); +#392269 = CARTESIAN_POINT('',(141.545,-158.45,-4.6E-02)); +#392270 = VECTOR('',#392271,1.); +#392271 = DIRECTION('',(0.,0.,1.)); +#392272 = ORIENTED_EDGE('',*,*,#392212,.F.); +#392273 = ORIENTED_EDGE('',*,*,#392274,.F.); +#392274 = EDGE_CURVE('',#392159,#392213,#392275,.T.); +#392275 = LINE('',#392276,#392277); +#392276 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392277 = VECTOR('',#392278,1.); +#392278 = DIRECTION('',(0.,0.,1.)); +#392279 = CYLINDRICAL_SURFACE('',#392280,0.275); +#392280 = AXIS2_PLACEMENT_3D('',#392281,#392282,#392283); +#392281 = CARTESIAN_POINT('',(141.82,-158.45,-4.6E-02)); +#392282 = DIRECTION('',(-0.,-0.,-1.)); +#392283 = DIRECTION('',(-1.,0.,-0.)); +#392284 = ADVANCED_FACE('',(#392285),#392296,.T.); +#392285 = FACE_BOUND('',#392286,.T.); +#392286 = EDGE_LOOP('',(#392287,#392288,#392289,#392290)); +#392287 = ORIENTED_EDGE('',*,*,#392186,.T.); +#392288 = ORIENTED_EDGE('',*,*,#392274,.T.); +#392289 = ORIENTED_EDGE('',*,*,#392240,.F.); +#392290 = ORIENTED_EDGE('',*,*,#392291,.F.); +#392291 = EDGE_CURVE('',#392178,#392232,#392292,.T.); +#392292 = LINE('',#392293,#392294); +#392293 = CARTESIAN_POINT('',(142.095,-157.85,-4.6E-02)); +#392294 = VECTOR('',#392295,1.); +#392295 = DIRECTION('',(0.,0.,1.)); +#392296 = PLANE('',#392297); +#392297 = AXIS2_PLACEMENT_3D('',#392298,#392299,#392300); +#392298 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392299 = DIRECTION('',(-1.,0.,0.)); +#392300 = DIRECTION('',(0.,1.,0.)); +#392301 = ADVANCED_FACE('',(#392302),#392313,.F.); +#392302 = FACE_BOUND('',#392303,.T.); +#392303 = EDGE_LOOP('',(#392304,#392305,#392306,#392307)); +#392304 = ORIENTED_EDGE('',*,*,#392177,.T.); +#392305 = ORIENTED_EDGE('',*,*,#392291,.T.); +#392306 = ORIENTED_EDGE('',*,*,#392231,.F.); +#392307 = ORIENTED_EDGE('',*,*,#392308,.F.); +#392308 = EDGE_CURVE('',#392170,#392224,#392309,.T.); +#392309 = LINE('',#392310,#392311); +#392310 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392311 = VECTOR('',#392312,1.); +#392312 = DIRECTION('',(0.,0.,1.)); +#392313 = CYLINDRICAL_SURFACE('',#392314,0.275); +#392314 = AXIS2_PLACEMENT_3D('',#392315,#392316,#392317); +#392315 = CARTESIAN_POINT('',(141.82,-157.85,-4.6E-02)); +#392316 = DIRECTION('',(-0.,-0.,-1.)); +#392317 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392318 = ADVANCED_FACE('',(#392319),#392325,.T.); +#392319 = FACE_BOUND('',#392320,.T.); +#392320 = EDGE_LOOP('',(#392321,#392322,#392323,#392324)); +#392321 = ORIENTED_EDGE('',*,*,#392169,.T.); +#392322 = ORIENTED_EDGE('',*,*,#392308,.T.); +#392323 = ORIENTED_EDGE('',*,*,#392223,.F.); +#392324 = ORIENTED_EDGE('',*,*,#392267,.F.); +#392325 = PLANE('',#392326); +#392326 = AXIS2_PLACEMENT_3D('',#392327,#392328,#392329); +#392327 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392328 = DIRECTION('',(1.,0.,-0.)); +#392329 = DIRECTION('',(0.,-1.,0.)); +#392330 = MANIFOLD_SOLID_BREP('',#392331); +#392331 = CLOSED_SHELL('',(#392332,#392374,#392405,#392436,#392490, + #392544,#392556,#392578,#392595,#392612)); +#392332 = ADVANCED_FACE('',(#392333),#392369,.T.); +#392333 = FACE_BOUND('',#392334,.F.); +#392334 = EDGE_LOOP('',(#392335,#392345,#392354,#392362)); +#392335 = ORIENTED_EDGE('',*,*,#392336,.T.); +#392336 = EDGE_CURVE('',#392337,#392339,#392341,.T.); +#392337 = VERTEX_POINT('',#392338); +#392338 = CARTESIAN_POINT('',(142.32,-158.45,0.)); +#392339 = VERTEX_POINT('',#392340); +#392340 = CARTESIAN_POINT('',(142.32,-158.45,-4.E-02)); +#392341 = LINE('',#392342,#392343); +#392342 = CARTESIAN_POINT('',(142.32,-158.45,0.)); +#392343 = VECTOR('',#392344,1.); +#392344 = DIRECTION('',(0.,0.,-1.)); +#392345 = ORIENTED_EDGE('',*,*,#392346,.T.); +#392346 = EDGE_CURVE('',#392339,#392347,#392349,.T.); +#392347 = VERTEX_POINT('',#392348); +#392348 = CARTESIAN_POINT('',(141.32,-158.45,-4.E-02)); +#392349 = CIRCLE('',#392350,0.5); +#392350 = AXIS2_PLACEMENT_3D('',#392351,#392352,#392353); +#392351 = CARTESIAN_POINT('',(141.82,-158.4499995566,-4.E-02)); +#392352 = DIRECTION('',(-0.,0.,-1.)); +#392353 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392354 = ORIENTED_EDGE('',*,*,#392355,.F.); +#392355 = EDGE_CURVE('',#392356,#392347,#392358,.T.); +#392356 = VERTEX_POINT('',#392357); +#392357 = CARTESIAN_POINT('',(141.32,-158.45,0.)); +#392358 = LINE('',#392359,#392360); +#392359 = CARTESIAN_POINT('',(141.32,-158.45,0.)); +#392360 = VECTOR('',#392361,1.); +#392361 = DIRECTION('',(0.,0.,-1.)); +#392362 = ORIENTED_EDGE('',*,*,#392363,.F.); +#392363 = EDGE_CURVE('',#392337,#392356,#392364,.T.); +#392364 = CIRCLE('',#392365,0.5); +#392365 = AXIS2_PLACEMENT_3D('',#392366,#392367,#392368); +#392366 = CARTESIAN_POINT('',(141.82,-158.4499995566,0.)); +#392367 = DIRECTION('',(-0.,0.,-1.)); +#392368 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392369 = CYLINDRICAL_SURFACE('',#392370,0.5); +#392370 = AXIS2_PLACEMENT_3D('',#392371,#392372,#392373); +#392371 = CARTESIAN_POINT('',(141.82,-158.4499995566,0.)); +#392372 = DIRECTION('',(0.,-0.,1.)); +#392373 = DIRECTION('',(1.,-8.866804250825E-07,-0.)); +#392374 = ADVANCED_FACE('',(#392375),#392400,.F.); +#392375 = FACE_BOUND('',#392376,.F.); +#392376 = EDGE_LOOP('',(#392377,#392387,#392393,#392394)); +#392377 = ORIENTED_EDGE('',*,*,#392378,.T.); +#392378 = EDGE_CURVE('',#392379,#392381,#392383,.T.); +#392379 = VERTEX_POINT('',#392380); +#392380 = CARTESIAN_POINT('',(142.32,-157.85,0.)); +#392381 = VERTEX_POINT('',#392382); +#392382 = CARTESIAN_POINT('',(142.32,-157.85,-4.E-02)); +#392383 = LINE('',#392384,#392385); +#392384 = CARTESIAN_POINT('',(142.32,-157.85,0.)); +#392385 = VECTOR('',#392386,1.); +#392386 = DIRECTION('',(0.,0.,-1.)); +#392387 = ORIENTED_EDGE('',*,*,#392388,.T.); +#392388 = EDGE_CURVE('',#392381,#392339,#392389,.T.); +#392389 = LINE('',#392390,#392391); +#392390 = CARTESIAN_POINT('',(142.32,-157.85,-4.E-02)); +#392391 = VECTOR('',#392392,1.); +#392392 = DIRECTION('',(0.,-1.,0.)); +#392393 = ORIENTED_EDGE('',*,*,#392336,.F.); +#392394 = ORIENTED_EDGE('',*,*,#392395,.F.); +#392395 = EDGE_CURVE('',#392379,#392337,#392396,.T.); +#392396 = LINE('',#392397,#392398); +#392397 = CARTESIAN_POINT('',(142.32,-157.85,0.)); +#392398 = VECTOR('',#392399,1.); +#392399 = DIRECTION('',(0.,-1.,0.)); +#392400 = PLANE('',#392401); +#392401 = AXIS2_PLACEMENT_3D('',#392402,#392403,#392404); +#392402 = CARTESIAN_POINT('',(142.32,-157.85,0.)); +#392403 = DIRECTION('',(-1.,-0.,-0.)); +#392404 = DIRECTION('',(0.,-1.,0.)); +#392405 = ADVANCED_FACE('',(#392406),#392431,.F.); +#392406 = FACE_BOUND('',#392407,.F.); +#392407 = EDGE_LOOP('',(#392408,#392409,#392417,#392425)); +#392408 = ORIENTED_EDGE('',*,*,#392355,.T.); +#392409 = ORIENTED_EDGE('',*,*,#392410,.T.); +#392410 = EDGE_CURVE('',#392347,#392411,#392413,.T.); +#392411 = VERTEX_POINT('',#392412); +#392412 = CARTESIAN_POINT('',(141.32,-157.85,-4.E-02)); +#392413 = LINE('',#392414,#392415); +#392414 = CARTESIAN_POINT('',(141.32,-158.45,-4.E-02)); +#392415 = VECTOR('',#392416,1.); +#392416 = DIRECTION('',(0.,1.,0.)); +#392417 = ORIENTED_EDGE('',*,*,#392418,.F.); +#392418 = EDGE_CURVE('',#392419,#392411,#392421,.T.); +#392419 = VERTEX_POINT('',#392420); +#392420 = CARTESIAN_POINT('',(141.32,-157.85,0.)); +#392421 = LINE('',#392422,#392423); +#392422 = CARTESIAN_POINT('',(141.32,-157.85,0.)); +#392423 = VECTOR('',#392424,1.); +#392424 = DIRECTION('',(0.,0.,-1.)); +#392425 = ORIENTED_EDGE('',*,*,#392426,.F.); +#392426 = EDGE_CURVE('',#392356,#392419,#392427,.T.); +#392427 = LINE('',#392428,#392429); +#392428 = CARTESIAN_POINT('',(141.32,-158.45,0.)); +#392429 = VECTOR('',#392430,1.); +#392430 = DIRECTION('',(0.,1.,0.)); +#392431 = PLANE('',#392432); +#392432 = AXIS2_PLACEMENT_3D('',#392433,#392434,#392435); +#392433 = CARTESIAN_POINT('',(141.32,-158.45,0.)); +#392434 = DIRECTION('',(1.,-0.,0.)); +#392435 = DIRECTION('',(0.,1.,0.)); +#392436 = ADVANCED_FACE('',(#392437,#392449),#392485,.F.); +#392437 = FACE_BOUND('',#392438,.F.); +#392438 = EDGE_LOOP('',(#392439,#392440,#392441,#392448)); +#392439 = ORIENTED_EDGE('',*,*,#392363,.T.); +#392440 = ORIENTED_EDGE('',*,*,#392426,.T.); +#392441 = ORIENTED_EDGE('',*,*,#392442,.T.); +#392442 = EDGE_CURVE('',#392419,#392379,#392443,.T.); +#392443 = CIRCLE('',#392444,0.500000000001); +#392444 = AXIS2_PLACEMENT_3D('',#392445,#392446,#392447); +#392445 = CARTESIAN_POINT('',(141.82,-157.8499991518,0.)); +#392446 = DIRECTION('',(0.,0.,-1.)); +#392447 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392448 = ORIENTED_EDGE('',*,*,#392395,.T.); +#392449 = FACE_BOUND('',#392450,.F.); +#392450 = EDGE_LOOP('',(#392451,#392462,#392470,#392479)); +#392451 = ORIENTED_EDGE('',*,*,#392452,.F.); +#392452 = EDGE_CURVE('',#392453,#392455,#392457,.T.); +#392453 = VERTEX_POINT('',#392454); +#392454 = CARTESIAN_POINT('',(141.545,-157.85,0.)); +#392455 = VERTEX_POINT('',#392456); +#392456 = CARTESIAN_POINT('',(142.095,-157.85,0.)); +#392457 = CIRCLE('',#392458,0.275); +#392458 = AXIS2_PLACEMENT_3D('',#392459,#392460,#392461); +#392459 = CARTESIAN_POINT('',(141.82,-157.85,0.)); +#392460 = DIRECTION('',(0.,-0.,-1.)); +#392461 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392462 = ORIENTED_EDGE('',*,*,#392463,.T.); +#392463 = EDGE_CURVE('',#392453,#392464,#392466,.T.); +#392464 = VERTEX_POINT('',#392465); +#392465 = CARTESIAN_POINT('',(141.545,-158.45,0.)); +#392466 = LINE('',#392467,#392468); +#392467 = CARTESIAN_POINT('',(141.545,-78.925,0.)); +#392468 = VECTOR('',#392469,1.); +#392469 = DIRECTION('',(0.,-1.,0.)); +#392470 = ORIENTED_EDGE('',*,*,#392471,.F.); +#392471 = EDGE_CURVE('',#392472,#392464,#392474,.T.); +#392472 = VERTEX_POINT('',#392473); +#392473 = CARTESIAN_POINT('',(142.095,-158.45,0.)); +#392474 = CIRCLE('',#392475,0.275); +#392475 = AXIS2_PLACEMENT_3D('',#392476,#392477,#392478); +#392476 = CARTESIAN_POINT('',(141.82,-158.45,0.)); +#392477 = DIRECTION('',(-0.,0.,-1.)); +#392478 = DIRECTION('',(-1.,0.,0.)); +#392479 = ORIENTED_EDGE('',*,*,#392480,.T.); +#392480 = EDGE_CURVE('',#392472,#392455,#392481,.T.); +#392481 = LINE('',#392482,#392483); +#392482 = CARTESIAN_POINT('',(142.095,-79.225,0.)); +#392483 = VECTOR('',#392484,1.); +#392484 = DIRECTION('',(0.,1.,-0.)); +#392485 = PLANE('',#392486); +#392486 = AXIS2_PLACEMENT_3D('',#392487,#392488,#392489); +#392487 = CARTESIAN_POINT('',(0.,0.,0.)); +#392488 = DIRECTION('',(-0.,-0.,-1.)); +#392489 = DIRECTION('',(-1.,0.,0.)); +#392490 = ADVANCED_FACE('',(#392491,#392503),#392539,.T.); +#392491 = FACE_BOUND('',#392492,.T.); +#392492 = EDGE_LOOP('',(#392493,#392494,#392495,#392502)); +#392493 = ORIENTED_EDGE('',*,*,#392346,.T.); +#392494 = ORIENTED_EDGE('',*,*,#392410,.T.); +#392495 = ORIENTED_EDGE('',*,*,#392496,.T.); +#392496 = EDGE_CURVE('',#392411,#392381,#392497,.T.); +#392497 = CIRCLE('',#392498,0.500000000001); +#392498 = AXIS2_PLACEMENT_3D('',#392499,#392500,#392501); +#392499 = CARTESIAN_POINT('',(141.82,-157.8499991518,-4.E-02)); +#392500 = DIRECTION('',(0.,0.,-1.)); +#392501 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392502 = ORIENTED_EDGE('',*,*,#392388,.T.); +#392503 = FACE_BOUND('',#392504,.T.); +#392504 = EDGE_LOOP('',(#392505,#392516,#392524,#392533)); +#392505 = ORIENTED_EDGE('',*,*,#392506,.F.); +#392506 = EDGE_CURVE('',#392507,#392509,#392511,.T.); +#392507 = VERTEX_POINT('',#392508); +#392508 = CARTESIAN_POINT('',(141.545,-157.85,-4.E-02)); +#392509 = VERTEX_POINT('',#392510); +#392510 = CARTESIAN_POINT('',(142.095,-157.85,-4.E-02)); +#392511 = CIRCLE('',#392512,0.275); +#392512 = AXIS2_PLACEMENT_3D('',#392513,#392514,#392515); +#392513 = CARTESIAN_POINT('',(141.82,-157.85,-4.E-02)); +#392514 = DIRECTION('',(0.,-0.,-1.)); +#392515 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392516 = ORIENTED_EDGE('',*,*,#392517,.T.); +#392517 = EDGE_CURVE('',#392507,#392518,#392520,.T.); +#392518 = VERTEX_POINT('',#392519); +#392519 = CARTESIAN_POINT('',(141.545,-158.45,-4.E-02)); +#392520 = LINE('',#392521,#392522); +#392521 = CARTESIAN_POINT('',(141.545,-78.925,-4.E-02)); +#392522 = VECTOR('',#392523,1.); +#392523 = DIRECTION('',(0.,-1.,0.)); +#392524 = ORIENTED_EDGE('',*,*,#392525,.F.); +#392525 = EDGE_CURVE('',#392526,#392518,#392528,.T.); +#392526 = VERTEX_POINT('',#392527); +#392527 = CARTESIAN_POINT('',(142.095,-158.45,-4.E-02)); +#392528 = CIRCLE('',#392529,0.275); +#392529 = AXIS2_PLACEMENT_3D('',#392530,#392531,#392532); +#392530 = CARTESIAN_POINT('',(141.82,-158.45,-4.E-02)); +#392531 = DIRECTION('',(-0.,0.,-1.)); +#392532 = DIRECTION('',(-1.,0.,0.)); +#392533 = ORIENTED_EDGE('',*,*,#392534,.T.); +#392534 = EDGE_CURVE('',#392526,#392509,#392535,.T.); +#392535 = LINE('',#392536,#392537); +#392536 = CARTESIAN_POINT('',(142.095,-79.225,-4.E-02)); +#392537 = VECTOR('',#392538,1.); +#392538 = DIRECTION('',(0.,1.,-0.)); +#392539 = PLANE('',#392540); +#392540 = AXIS2_PLACEMENT_3D('',#392541,#392542,#392543); +#392541 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#392542 = DIRECTION('',(-0.,-0.,-1.)); +#392543 = DIRECTION('',(-1.,0.,0.)); +#392544 = ADVANCED_FACE('',(#392545),#392551,.T.); +#392545 = FACE_BOUND('',#392546,.F.); +#392546 = EDGE_LOOP('',(#392547,#392548,#392549,#392550)); +#392547 = ORIENTED_EDGE('',*,*,#392418,.T.); +#392548 = ORIENTED_EDGE('',*,*,#392496,.T.); +#392549 = ORIENTED_EDGE('',*,*,#392378,.F.); +#392550 = ORIENTED_EDGE('',*,*,#392442,.F.); +#392551 = CYLINDRICAL_SURFACE('',#392552,0.500000000001); +#392552 = AXIS2_PLACEMENT_3D('',#392553,#392554,#392555); +#392553 = CARTESIAN_POINT('',(141.82,-157.8499991518,0.)); +#392554 = DIRECTION('',(-0.,-0.,1.)); +#392555 = DIRECTION('',(-0.999999999999,-1.696250706116E-06,-0.)); +#392556 = ADVANCED_FACE('',(#392557),#392573,.F.); +#392557 = FACE_BOUND('',#392558,.T.); +#392558 = EDGE_LOOP('',(#392559,#392560,#392566,#392567)); +#392559 = ORIENTED_EDGE('',*,*,#392506,.T.); +#392560 = ORIENTED_EDGE('',*,*,#392561,.T.); +#392561 = EDGE_CURVE('',#392509,#392455,#392562,.T.); +#392562 = LINE('',#392563,#392564); +#392563 = CARTESIAN_POINT('',(142.095,-157.85,-4.6E-02)); +#392564 = VECTOR('',#392565,1.); +#392565 = DIRECTION('',(0.,0.,1.)); +#392566 = ORIENTED_EDGE('',*,*,#392452,.F.); +#392567 = ORIENTED_EDGE('',*,*,#392568,.F.); +#392568 = EDGE_CURVE('',#392507,#392453,#392569,.T.); +#392569 = LINE('',#392570,#392571); +#392570 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392571 = VECTOR('',#392572,1.); +#392572 = DIRECTION('',(0.,0.,1.)); +#392573 = CYLINDRICAL_SURFACE('',#392574,0.275); +#392574 = AXIS2_PLACEMENT_3D('',#392575,#392576,#392577); +#392575 = CARTESIAN_POINT('',(141.82,-157.85,-4.6E-02)); +#392576 = DIRECTION('',(-0.,-0.,-1.)); +#392577 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392578 = ADVANCED_FACE('',(#392579),#392590,.T.); +#392579 = FACE_BOUND('',#392580,.T.); +#392580 = EDGE_LOOP('',(#392581,#392582,#392588,#392589)); +#392581 = ORIENTED_EDGE('',*,*,#392534,.F.); +#392582 = ORIENTED_EDGE('',*,*,#392583,.T.); +#392583 = EDGE_CURVE('',#392526,#392472,#392584,.T.); +#392584 = LINE('',#392585,#392586); +#392585 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392586 = VECTOR('',#392587,1.); +#392587 = DIRECTION('',(0.,0.,1.)); +#392588 = ORIENTED_EDGE('',*,*,#392480,.T.); +#392589 = ORIENTED_EDGE('',*,*,#392561,.F.); +#392590 = PLANE('',#392591); +#392591 = AXIS2_PLACEMENT_3D('',#392592,#392593,#392594); +#392592 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392593 = DIRECTION('',(-1.,0.,0.)); +#392594 = DIRECTION('',(0.,1.,0.)); +#392595 = ADVANCED_FACE('',(#392596),#392607,.F.); +#392596 = FACE_BOUND('',#392597,.T.); +#392597 = EDGE_LOOP('',(#392598,#392599,#392605,#392606)); +#392598 = ORIENTED_EDGE('',*,*,#392525,.T.); +#392599 = ORIENTED_EDGE('',*,*,#392600,.T.); +#392600 = EDGE_CURVE('',#392518,#392464,#392601,.T.); +#392601 = LINE('',#392602,#392603); +#392602 = CARTESIAN_POINT('',(141.545,-158.45,-4.6E-02)); +#392603 = VECTOR('',#392604,1.); +#392604 = DIRECTION('',(0.,0.,1.)); +#392605 = ORIENTED_EDGE('',*,*,#392471,.F.); +#392606 = ORIENTED_EDGE('',*,*,#392583,.F.); +#392607 = CYLINDRICAL_SURFACE('',#392608,0.275); +#392608 = AXIS2_PLACEMENT_3D('',#392609,#392610,#392611); +#392609 = CARTESIAN_POINT('',(141.82,-158.45,-4.6E-02)); +#392610 = DIRECTION('',(-0.,-0.,-1.)); +#392611 = DIRECTION('',(-1.,0.,-0.)); +#392612 = ADVANCED_FACE('',(#392613),#392619,.T.); +#392613 = FACE_BOUND('',#392614,.T.); +#392614 = EDGE_LOOP('',(#392615,#392616,#392617,#392618)); +#392615 = ORIENTED_EDGE('',*,*,#392517,.F.); +#392616 = ORIENTED_EDGE('',*,*,#392568,.T.); +#392617 = ORIENTED_EDGE('',*,*,#392463,.T.); +#392618 = ORIENTED_EDGE('',*,*,#392600,.F.); +#392619 = PLANE('',#392620); +#392620 = AXIS2_PLACEMENT_3D('',#392621,#392622,#392623); +#392621 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392622 = DIRECTION('',(1.,0.,-0.)); +#392623 = DIRECTION('',(0.,-1.,0.)); +#392624 = MANIFOLD_SOLID_BREP('',#392625); +#392625 = CLOSED_SHELL('',(#392626,#392666,#392699,#392732,#392785, + #392838,#392850,#392872,#392889,#392906)); +#392626 = ADVANCED_FACE('',(#392627),#392661,.F.); +#392627 = FACE_BOUND('',#392628,.F.); +#392628 = EDGE_LOOP('',(#392629,#392639,#392647,#392655)); +#392629 = ORIENTED_EDGE('',*,*,#392630,.T.); +#392630 = EDGE_CURVE('',#392631,#392633,#392635,.T.); +#392631 = VERTEX_POINT('',#392632); +#392632 = CARTESIAN_POINT('',(141.52,-157.85,-4.E-02)); +#392633 = VERTEX_POINT('',#392634); +#392634 = CARTESIAN_POINT('',(141.52,-157.85,1.55)); +#392635 = LINE('',#392636,#392637); +#392636 = CARTESIAN_POINT('',(141.52,-157.85,-4.E-02)); +#392637 = VECTOR('',#392638,1.); +#392638 = DIRECTION('',(0.,0.,1.)); +#392639 = ORIENTED_EDGE('',*,*,#392640,.T.); +#392640 = EDGE_CURVE('',#392633,#392641,#392643,.T.); +#392641 = VERTEX_POINT('',#392642); +#392642 = CARTESIAN_POINT('',(141.52,-158.45,1.55)); +#392643 = LINE('',#392644,#392645); +#392644 = CARTESIAN_POINT('',(141.52,-157.85,1.55)); +#392645 = VECTOR('',#392646,1.); +#392646 = DIRECTION('',(0.,-1.,0.)); +#392647 = ORIENTED_EDGE('',*,*,#392648,.F.); +#392648 = EDGE_CURVE('',#392649,#392641,#392651,.T.); +#392649 = VERTEX_POINT('',#392650); +#392650 = CARTESIAN_POINT('',(141.52,-158.45,-4.E-02)); +#392651 = LINE('',#392652,#392653); +#392652 = CARTESIAN_POINT('',(141.52,-158.45,-4.E-02)); +#392653 = VECTOR('',#392654,1.); +#392654 = DIRECTION('',(0.,0.,1.)); +#392655 = ORIENTED_EDGE('',*,*,#392656,.F.); +#392656 = EDGE_CURVE('',#392631,#392649,#392657,.T.); +#392657 = LINE('',#392658,#392659); +#392658 = CARTESIAN_POINT('',(141.52,-157.85,-4.E-02)); +#392659 = VECTOR('',#392660,1.); +#392660 = DIRECTION('',(0.,-1.,0.)); +#392661 = PLANE('',#392662); +#392662 = AXIS2_PLACEMENT_3D('',#392663,#392664,#392665); +#392663 = CARTESIAN_POINT('',(141.52,-157.85,-4.E-02)); +#392664 = DIRECTION('',(1.,0.,-0.)); +#392665 = DIRECTION('',(0.,-1.,0.)); +#392666 = ADVANCED_FACE('',(#392667),#392694,.T.); +#392667 = FACE_BOUND('',#392668,.F.); +#392668 = EDGE_LOOP('',(#392669,#392679,#392686,#392687)); +#392669 = ORIENTED_EDGE('',*,*,#392670,.T.); +#392670 = EDGE_CURVE('',#392671,#392673,#392675,.T.); +#392671 = VERTEX_POINT('',#392672); +#392672 = CARTESIAN_POINT('',(142.12,-157.85,-4.E-02)); +#392673 = VERTEX_POINT('',#392674); +#392674 = CARTESIAN_POINT('',(142.12,-157.85,1.55)); +#392675 = LINE('',#392676,#392677); +#392676 = CARTESIAN_POINT('',(142.12,-157.85,-4.E-02)); +#392677 = VECTOR('',#392678,1.); +#392678 = DIRECTION('',(0.,0.,1.)); +#392679 = ORIENTED_EDGE('',*,*,#392680,.T.); +#392680 = EDGE_CURVE('',#392673,#392633,#392681,.T.); +#392681 = CIRCLE('',#392682,0.3); +#392682 = AXIS2_PLACEMENT_3D('',#392683,#392684,#392685); +#392683 = CARTESIAN_POINT('',(141.82,-157.85,1.55)); +#392684 = DIRECTION('',(0.,0.,1.)); +#392685 = DIRECTION('',(1.,0.,-0.)); +#392686 = ORIENTED_EDGE('',*,*,#392630,.F.); +#392687 = ORIENTED_EDGE('',*,*,#392688,.F.); +#392688 = EDGE_CURVE('',#392671,#392631,#392689,.T.); +#392689 = CIRCLE('',#392690,0.3); +#392690 = AXIS2_PLACEMENT_3D('',#392691,#392692,#392693); +#392691 = CARTESIAN_POINT('',(141.82,-157.85,-4.E-02)); +#392692 = DIRECTION('',(0.,0.,1.)); +#392693 = DIRECTION('',(1.,0.,-0.)); +#392694 = CYLINDRICAL_SURFACE('',#392695,0.3); +#392695 = AXIS2_PLACEMENT_3D('',#392696,#392697,#392698); +#392696 = CARTESIAN_POINT('',(141.82,-157.85,-4.E-02)); +#392697 = DIRECTION('',(-0.,-0.,-1.)); +#392698 = DIRECTION('',(1.,0.,-0.)); +#392699 = ADVANCED_FACE('',(#392700),#392727,.T.); +#392700 = FACE_BOUND('',#392701,.F.); +#392701 = EDGE_LOOP('',(#392702,#392703,#392712,#392720)); +#392702 = ORIENTED_EDGE('',*,*,#392648,.T.); +#392703 = ORIENTED_EDGE('',*,*,#392704,.T.); +#392704 = EDGE_CURVE('',#392641,#392705,#392707,.T.); +#392705 = VERTEX_POINT('',#392706); +#392706 = CARTESIAN_POINT('',(142.12,-158.45,1.55)); +#392707 = CIRCLE('',#392708,0.3); +#392708 = AXIS2_PLACEMENT_3D('',#392709,#392710,#392711); +#392709 = CARTESIAN_POINT('',(141.82,-158.45,1.55)); +#392710 = DIRECTION('',(0.,0.,1.)); +#392711 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#392712 = ORIENTED_EDGE('',*,*,#392713,.F.); +#392713 = EDGE_CURVE('',#392714,#392705,#392716,.T.); +#392714 = VERTEX_POINT('',#392715); +#392715 = CARTESIAN_POINT('',(142.12,-158.45,-4.E-02)); +#392716 = LINE('',#392717,#392718); +#392717 = CARTESIAN_POINT('',(142.12,-158.45,-4.E-02)); +#392718 = VECTOR('',#392719,1.); +#392719 = DIRECTION('',(0.,0.,1.)); +#392720 = ORIENTED_EDGE('',*,*,#392721,.F.); +#392721 = EDGE_CURVE('',#392649,#392714,#392722,.T.); +#392722 = CIRCLE('',#392723,0.3); +#392723 = AXIS2_PLACEMENT_3D('',#392724,#392725,#392726); +#392724 = CARTESIAN_POINT('',(141.82,-158.45,-4.E-02)); +#392725 = DIRECTION('',(0.,0.,1.)); +#392726 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#392727 = CYLINDRICAL_SURFACE('',#392728,0.3); +#392728 = AXIS2_PLACEMENT_3D('',#392729,#392730,#392731); +#392729 = CARTESIAN_POINT('',(141.82,-158.45,-4.E-02)); +#392730 = DIRECTION('',(-0.,-0.,-1.)); +#392731 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#392732 = ADVANCED_FACE('',(#392733,#392744),#392780,.F.); +#392733 = FACE_BOUND('',#392734,.F.); +#392734 = EDGE_LOOP('',(#392735,#392736,#392737,#392743)); +#392735 = ORIENTED_EDGE('',*,*,#392656,.T.); +#392736 = ORIENTED_EDGE('',*,*,#392721,.T.); +#392737 = ORIENTED_EDGE('',*,*,#392738,.T.); +#392738 = EDGE_CURVE('',#392714,#392671,#392739,.T.); +#392739 = LINE('',#392740,#392741); +#392740 = CARTESIAN_POINT('',(142.12,-158.45,-4.E-02)); +#392741 = VECTOR('',#392742,1.); +#392742 = DIRECTION('',(0.,1.,0.)); +#392743 = ORIENTED_EDGE('',*,*,#392688,.T.); +#392744 = FACE_BOUND('',#392745,.F.); +#392745 = EDGE_LOOP('',(#392746,#392757,#392765,#392774)); +#392746 = ORIENTED_EDGE('',*,*,#392747,.T.); +#392747 = EDGE_CURVE('',#392748,#392750,#392752,.T.); +#392748 = VERTEX_POINT('',#392749); +#392749 = CARTESIAN_POINT('',(142.095,-158.45,-4.E-02)); +#392750 = VERTEX_POINT('',#392751); +#392751 = CARTESIAN_POINT('',(141.545,-158.45,-4.E-02)); +#392752 = CIRCLE('',#392753,0.275); +#392753 = AXIS2_PLACEMENT_3D('',#392754,#392755,#392756); +#392754 = CARTESIAN_POINT('',(141.82,-158.45,-4.E-02)); +#392755 = DIRECTION('',(-0.,0.,-1.)); +#392756 = DIRECTION('',(-1.,0.,0.)); +#392757 = ORIENTED_EDGE('',*,*,#392758,.T.); +#392758 = EDGE_CURVE('',#392750,#392759,#392761,.T.); +#392759 = VERTEX_POINT('',#392760); +#392760 = CARTESIAN_POINT('',(141.545,-157.85,-4.E-02)); +#392761 = LINE('',#392762,#392763); +#392762 = CARTESIAN_POINT('',(141.545,-157.85,-4.E-02)); +#392763 = VECTOR('',#392764,1.); +#392764 = DIRECTION('',(-0.,1.,0.)); +#392765 = ORIENTED_EDGE('',*,*,#392766,.T.); +#392766 = EDGE_CURVE('',#392759,#392767,#392769,.T.); +#392767 = VERTEX_POINT('',#392768); +#392768 = CARTESIAN_POINT('',(142.095,-157.85,-4.E-02)); +#392769 = CIRCLE('',#392770,0.275); +#392770 = AXIS2_PLACEMENT_3D('',#392771,#392772,#392773); +#392771 = CARTESIAN_POINT('',(141.82,-157.85,-4.E-02)); +#392772 = DIRECTION('',(0.,-0.,-1.)); +#392773 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392774 = ORIENTED_EDGE('',*,*,#392775,.T.); +#392775 = EDGE_CURVE('',#392767,#392748,#392776,.T.); +#392776 = LINE('',#392777,#392778); +#392777 = CARTESIAN_POINT('',(142.095,-158.15,-4.E-02)); +#392778 = VECTOR('',#392779,1.); +#392779 = DIRECTION('',(0.,-1.,0.)); +#392780 = PLANE('',#392781); +#392781 = AXIS2_PLACEMENT_3D('',#392782,#392783,#392784); +#392782 = CARTESIAN_POINT('',(141.52,-157.85,-4.E-02)); +#392783 = DIRECTION('',(0.,0.,1.)); +#392784 = DIRECTION('',(1.,0.,-0.)); +#392785 = ADVANCED_FACE('',(#392786,#392797),#392833,.T.); +#392786 = FACE_BOUND('',#392787,.T.); +#392787 = EDGE_LOOP('',(#392788,#392789,#392790,#392796)); +#392788 = ORIENTED_EDGE('',*,*,#392640,.T.); +#392789 = ORIENTED_EDGE('',*,*,#392704,.T.); +#392790 = ORIENTED_EDGE('',*,*,#392791,.T.); +#392791 = EDGE_CURVE('',#392705,#392673,#392792,.T.); +#392792 = LINE('',#392793,#392794); +#392793 = CARTESIAN_POINT('',(142.12,-158.45,1.55)); +#392794 = VECTOR('',#392795,1.); +#392795 = DIRECTION('',(0.,1.,0.)); +#392796 = ORIENTED_EDGE('',*,*,#392680,.T.); +#392797 = FACE_BOUND('',#392798,.T.); +#392798 = EDGE_LOOP('',(#392799,#392810,#392818,#392827)); +#392799 = ORIENTED_EDGE('',*,*,#392800,.T.); +#392800 = EDGE_CURVE('',#392801,#392803,#392805,.T.); +#392801 = VERTEX_POINT('',#392802); +#392802 = CARTESIAN_POINT('',(142.095,-158.45,1.55)); +#392803 = VERTEX_POINT('',#392804); +#392804 = CARTESIAN_POINT('',(141.545,-158.45,1.55)); +#392805 = CIRCLE('',#392806,0.275); +#392806 = AXIS2_PLACEMENT_3D('',#392807,#392808,#392809); +#392807 = CARTESIAN_POINT('',(141.82,-158.45,1.55)); +#392808 = DIRECTION('',(-0.,0.,-1.)); +#392809 = DIRECTION('',(-1.,0.,0.)); +#392810 = ORIENTED_EDGE('',*,*,#392811,.T.); +#392811 = EDGE_CURVE('',#392803,#392812,#392814,.T.); +#392812 = VERTEX_POINT('',#392813); +#392813 = CARTESIAN_POINT('',(141.545,-157.85,1.55)); +#392814 = LINE('',#392815,#392816); +#392815 = CARTESIAN_POINT('',(141.545,-157.85,1.55)); +#392816 = VECTOR('',#392817,1.); +#392817 = DIRECTION('',(-0.,1.,0.)); +#392818 = ORIENTED_EDGE('',*,*,#392819,.T.); +#392819 = EDGE_CURVE('',#392812,#392820,#392822,.T.); +#392820 = VERTEX_POINT('',#392821); +#392821 = CARTESIAN_POINT('',(142.095,-157.85,1.55)); +#392822 = CIRCLE('',#392823,0.275); +#392823 = AXIS2_PLACEMENT_3D('',#392824,#392825,#392826); +#392824 = CARTESIAN_POINT('',(141.82,-157.85,1.55)); +#392825 = DIRECTION('',(0.,-0.,-1.)); +#392826 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392827 = ORIENTED_EDGE('',*,*,#392828,.T.); +#392828 = EDGE_CURVE('',#392820,#392801,#392829,.T.); +#392829 = LINE('',#392830,#392831); +#392830 = CARTESIAN_POINT('',(142.095,-158.15,1.55)); +#392831 = VECTOR('',#392832,1.); +#392832 = DIRECTION('',(0.,-1.,0.)); +#392833 = PLANE('',#392834); +#392834 = AXIS2_PLACEMENT_3D('',#392835,#392836,#392837); +#392835 = CARTESIAN_POINT('',(141.52,-157.85,1.55)); +#392836 = DIRECTION('',(0.,0.,1.)); +#392837 = DIRECTION('',(1.,0.,-0.)); +#392838 = ADVANCED_FACE('',(#392839),#392845,.F.); +#392839 = FACE_BOUND('',#392840,.F.); +#392840 = EDGE_LOOP('',(#392841,#392842,#392843,#392844)); +#392841 = ORIENTED_EDGE('',*,*,#392713,.T.); +#392842 = ORIENTED_EDGE('',*,*,#392791,.T.); +#392843 = ORIENTED_EDGE('',*,*,#392670,.F.); +#392844 = ORIENTED_EDGE('',*,*,#392738,.F.); +#392845 = PLANE('',#392846); +#392846 = AXIS2_PLACEMENT_3D('',#392847,#392848,#392849); +#392847 = CARTESIAN_POINT('',(142.12,-158.45,-4.E-02)); +#392848 = DIRECTION('',(-1.,0.,0.)); +#392849 = DIRECTION('',(0.,1.,0.)); +#392850 = ADVANCED_FACE('',(#392851),#392867,.F.); +#392851 = FACE_BOUND('',#392852,.T.); +#392852 = EDGE_LOOP('',(#392853,#392854,#392860,#392861)); +#392853 = ORIENTED_EDGE('',*,*,#392747,.T.); +#392854 = ORIENTED_EDGE('',*,*,#392855,.T.); +#392855 = EDGE_CURVE('',#392750,#392803,#392856,.T.); +#392856 = LINE('',#392857,#392858); +#392857 = CARTESIAN_POINT('',(141.545,-158.45,-4.6E-02)); +#392858 = VECTOR('',#392859,1.); +#392859 = DIRECTION('',(0.,0.,1.)); +#392860 = ORIENTED_EDGE('',*,*,#392800,.F.); +#392861 = ORIENTED_EDGE('',*,*,#392862,.F.); +#392862 = EDGE_CURVE('',#392748,#392801,#392863,.T.); +#392863 = LINE('',#392864,#392865); +#392864 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392865 = VECTOR('',#392866,1.); +#392866 = DIRECTION('',(0.,0.,1.)); +#392867 = CYLINDRICAL_SURFACE('',#392868,0.275); +#392868 = AXIS2_PLACEMENT_3D('',#392869,#392870,#392871); +#392869 = CARTESIAN_POINT('',(141.82,-158.45,-4.6E-02)); +#392870 = DIRECTION('',(-0.,-0.,-1.)); +#392871 = DIRECTION('',(-1.,0.,-0.)); +#392872 = ADVANCED_FACE('',(#392873),#392884,.T.); +#392873 = FACE_BOUND('',#392874,.T.); +#392874 = EDGE_LOOP('',(#392875,#392876,#392877,#392878)); +#392875 = ORIENTED_EDGE('',*,*,#392775,.T.); +#392876 = ORIENTED_EDGE('',*,*,#392862,.T.); +#392877 = ORIENTED_EDGE('',*,*,#392828,.F.); +#392878 = ORIENTED_EDGE('',*,*,#392879,.F.); +#392879 = EDGE_CURVE('',#392767,#392820,#392880,.T.); +#392880 = LINE('',#392881,#392882); +#392881 = CARTESIAN_POINT('',(142.095,-157.85,-4.6E-02)); +#392882 = VECTOR('',#392883,1.); +#392883 = DIRECTION('',(0.,0.,1.)); +#392884 = PLANE('',#392885); +#392885 = AXIS2_PLACEMENT_3D('',#392886,#392887,#392888); +#392886 = CARTESIAN_POINT('',(142.095,-158.45,-4.6E-02)); +#392887 = DIRECTION('',(-1.,0.,0.)); +#392888 = DIRECTION('',(0.,1.,0.)); +#392889 = ADVANCED_FACE('',(#392890),#392901,.F.); +#392890 = FACE_BOUND('',#392891,.T.); +#392891 = EDGE_LOOP('',(#392892,#392893,#392894,#392895)); +#392892 = ORIENTED_EDGE('',*,*,#392766,.T.); +#392893 = ORIENTED_EDGE('',*,*,#392879,.T.); +#392894 = ORIENTED_EDGE('',*,*,#392819,.F.); +#392895 = ORIENTED_EDGE('',*,*,#392896,.F.); +#392896 = EDGE_CURVE('',#392759,#392812,#392897,.T.); +#392897 = LINE('',#392898,#392899); +#392898 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392899 = VECTOR('',#392900,1.); +#392900 = DIRECTION('',(0.,0.,1.)); +#392901 = CYLINDRICAL_SURFACE('',#392902,0.275); +#392902 = AXIS2_PLACEMENT_3D('',#392903,#392904,#392905); +#392903 = CARTESIAN_POINT('',(141.82,-157.85,-4.6E-02)); +#392904 = DIRECTION('',(-0.,-0.,-1.)); +#392905 = DIRECTION('',(1.,-1.03351670656E-13,0.)); +#392906 = ADVANCED_FACE('',(#392907),#392913,.T.); +#392907 = FACE_BOUND('',#392908,.T.); +#392908 = EDGE_LOOP('',(#392909,#392910,#392911,#392912)); +#392909 = ORIENTED_EDGE('',*,*,#392758,.T.); +#392910 = ORIENTED_EDGE('',*,*,#392896,.T.); +#392911 = ORIENTED_EDGE('',*,*,#392811,.F.); +#392912 = ORIENTED_EDGE('',*,*,#392855,.F.); +#392913 = PLANE('',#392914); +#392914 = AXIS2_PLACEMENT_3D('',#392915,#392916,#392917); +#392915 = CARTESIAN_POINT('',(141.545,-157.85,-4.6E-02)); +#392916 = DIRECTION('',(1.,0.,-0.)); +#392917 = DIRECTION('',(0.,-1.,0.)); +#392918 = MANIFOLD_SOLID_BREP('',#392919); +#392919 = CLOSED_SHELL('',(#392920,#392962,#392993,#393026,#393057, + #393090,#393121,#393154,#393176,#393192)); +#392920 = ADVANCED_FACE('',(#392921),#392957,.T.); +#392921 = FACE_BOUND('',#392922,.T.); +#392922 = EDGE_LOOP('',(#392923,#392933,#392942,#392950)); +#392923 = ORIENTED_EDGE('',*,*,#392924,.T.); +#392924 = EDGE_CURVE('',#392925,#392927,#392929,.T.); +#392925 = VERTEX_POINT('',#392926); +#392926 = CARTESIAN_POINT('',(143.275,-130.55,1.51)); +#392927 = VERTEX_POINT('',#392928); +#392928 = CARTESIAN_POINT('',(143.275,-130.55,1.55)); +#392929 = LINE('',#392930,#392931); +#392930 = CARTESIAN_POINT('',(143.275,-130.55,1.51)); +#392931 = VECTOR('',#392932,1.); +#392932 = DIRECTION('',(0.,0.,1.)); +#392933 = ORIENTED_EDGE('',*,*,#392934,.T.); +#392934 = EDGE_CURVE('',#392927,#392935,#392937,.T.); +#392935 = VERTEX_POINT('',#392936); +#392936 = CARTESIAN_POINT('',(143.5,-130.325,1.55)); +#392937 = CIRCLE('',#392938,0.225000087974); +#392938 = AXIS2_PLACEMENT_3D('',#392939,#392940,#392941); +#392939 = CARTESIAN_POINT('',(143.50000008797,-130.5500000879,1.55)); +#392940 = DIRECTION('',(0.,0.,-1.)); +#392941 = DIRECTION('',(-1.,3.909955352945E-07,0.)); +#392942 = ORIENTED_EDGE('',*,*,#392943,.F.); +#392943 = EDGE_CURVE('',#392944,#392935,#392946,.T.); +#392944 = VERTEX_POINT('',#392945); +#392945 = CARTESIAN_POINT('',(143.5,-130.325,1.51)); +#392946 = LINE('',#392947,#392948); +#392947 = CARTESIAN_POINT('',(143.5,-130.325,1.51)); +#392948 = VECTOR('',#392949,1.); +#392949 = DIRECTION('',(0.,0.,1.)); +#392950 = ORIENTED_EDGE('',*,*,#392951,.F.); +#392951 = EDGE_CURVE('',#392925,#392944,#392952,.T.); +#392952 = CIRCLE('',#392953,0.225000087974); +#392953 = AXIS2_PLACEMENT_3D('',#392954,#392955,#392956); +#392954 = CARTESIAN_POINT('',(143.50000008797,-130.5500000879,1.51)); +#392955 = DIRECTION('',(0.,0.,-1.)); +#392956 = DIRECTION('',(-1.,3.909955352945E-07,0.)); +#392957 = CYLINDRICAL_SURFACE('',#392958,0.225000087974); +#392958 = AXIS2_PLACEMENT_3D('',#392959,#392960,#392961); +#392959 = CARTESIAN_POINT('',(143.50000008797,-130.5500000879,1.51)); +#392960 = DIRECTION('',(0.,0.,-1.)); +#392961 = DIRECTION('',(-1.,3.909955352945E-07,0.)); +#392962 = ADVANCED_FACE('',(#392963),#392988,.T.); +#392963 = FACE_BOUND('',#392964,.T.); +#392964 = EDGE_LOOP('',(#392965,#392966,#392974,#392982)); +#392965 = ORIENTED_EDGE('',*,*,#392943,.T.); +#392966 = ORIENTED_EDGE('',*,*,#392967,.T.); +#392967 = EDGE_CURVE('',#392935,#392968,#392970,.T.); +#392968 = VERTEX_POINT('',#392969); +#392969 = CARTESIAN_POINT('',(144.,-130.325,1.55)); +#392970 = LINE('',#392971,#392972); +#392971 = CARTESIAN_POINT('',(143.5,-130.325,1.55)); +#392972 = VECTOR('',#392973,1.); +#392973 = DIRECTION('',(1.,0.,0.)); +#392974 = ORIENTED_EDGE('',*,*,#392975,.F.); +#392975 = EDGE_CURVE('',#392976,#392968,#392978,.T.); +#392976 = VERTEX_POINT('',#392977); +#392977 = CARTESIAN_POINT('',(144.,-130.325,1.51)); +#392978 = LINE('',#392979,#392980); +#392979 = CARTESIAN_POINT('',(144.,-130.325,1.51)); +#392980 = VECTOR('',#392981,1.); +#392981 = DIRECTION('',(0.,0.,1.)); +#392982 = ORIENTED_EDGE('',*,*,#392983,.F.); +#392983 = EDGE_CURVE('',#392944,#392976,#392984,.T.); +#392984 = LINE('',#392985,#392986); +#392985 = CARTESIAN_POINT('',(143.5,-130.325,1.51)); +#392986 = VECTOR('',#392987,1.); +#392987 = DIRECTION('',(1.,0.,0.)); +#392988 = PLANE('',#392989); +#392989 = AXIS2_PLACEMENT_3D('',#392990,#392991,#392992); +#392990 = CARTESIAN_POINT('',(143.5,-130.325,1.51)); +#392991 = DIRECTION('',(0.,1.,0.)); +#392992 = DIRECTION('',(1.,0.,0.)); +#392993 = ADVANCED_FACE('',(#392994),#393021,.T.); +#392994 = FACE_BOUND('',#392995,.T.); +#392995 = EDGE_LOOP('',(#392996,#392997,#393006,#393014)); +#392996 = ORIENTED_EDGE('',*,*,#392975,.T.); +#392997 = ORIENTED_EDGE('',*,*,#392998,.T.); +#392998 = EDGE_CURVE('',#392968,#392999,#393001,.T.); +#392999 = VERTEX_POINT('',#393000); +#393000 = CARTESIAN_POINT('',(144.225,-130.55,1.55)); +#393001 = CIRCLE('',#393002,0.225000087974); +#393002 = AXIS2_PLACEMENT_3D('',#393003,#393004,#393005); +#393003 = CARTESIAN_POINT('',(143.99999991202,-130.5500000879,1.55)); +#393004 = DIRECTION('',(0.,0.,-1.)); +#393005 = DIRECTION('',(3.909956616132E-07,1.,0.)); +#393006 = ORIENTED_EDGE('',*,*,#393007,.F.); +#393007 = EDGE_CURVE('',#393008,#392999,#393010,.T.); +#393008 = VERTEX_POINT('',#393009); +#393009 = CARTESIAN_POINT('',(144.225,-130.55,1.51)); +#393010 = LINE('',#393011,#393012); +#393011 = CARTESIAN_POINT('',(144.225,-130.55,1.51)); +#393012 = VECTOR('',#393013,1.); +#393013 = DIRECTION('',(0.,0.,1.)); +#393014 = ORIENTED_EDGE('',*,*,#393015,.F.); +#393015 = EDGE_CURVE('',#392976,#393008,#393016,.T.); +#393016 = CIRCLE('',#393017,0.225000087974); +#393017 = AXIS2_PLACEMENT_3D('',#393018,#393019,#393020); +#393018 = CARTESIAN_POINT('',(143.99999991202,-130.5500000879,1.51)); +#393019 = DIRECTION('',(0.,0.,-1.)); +#393020 = DIRECTION('',(3.909956616132E-07,1.,0.)); +#393021 = CYLINDRICAL_SURFACE('',#393022,0.225000087974); +#393022 = AXIS2_PLACEMENT_3D('',#393023,#393024,#393025); +#393023 = CARTESIAN_POINT('',(143.99999991202,-130.5500000879,1.51)); +#393024 = DIRECTION('',(0.,0.,-1.)); +#393025 = DIRECTION('',(3.909956616132E-07,1.,0.)); +#393026 = ADVANCED_FACE('',(#393027),#393052,.T.); +#393027 = FACE_BOUND('',#393028,.T.); +#393028 = EDGE_LOOP('',(#393029,#393030,#393038,#393046)); +#393029 = ORIENTED_EDGE('',*,*,#393007,.T.); +#393030 = ORIENTED_EDGE('',*,*,#393031,.T.); +#393031 = EDGE_CURVE('',#392999,#393032,#393034,.T.); +#393032 = VERTEX_POINT('',#393033); +#393033 = CARTESIAN_POINT('',(144.225,-131.,1.55)); +#393034 = LINE('',#393035,#393036); +#393035 = CARTESIAN_POINT('',(144.225,-130.55,1.55)); +#393036 = VECTOR('',#393037,1.); +#393037 = DIRECTION('',(0.,-1.,0.)); +#393038 = ORIENTED_EDGE('',*,*,#393039,.F.); +#393039 = EDGE_CURVE('',#393040,#393032,#393042,.T.); +#393040 = VERTEX_POINT('',#393041); +#393041 = CARTESIAN_POINT('',(144.225,-131.,1.51)); +#393042 = LINE('',#393043,#393044); +#393043 = CARTESIAN_POINT('',(144.225,-131.,1.51)); +#393044 = VECTOR('',#393045,1.); +#393045 = DIRECTION('',(0.,0.,1.)); +#393046 = ORIENTED_EDGE('',*,*,#393047,.F.); +#393047 = EDGE_CURVE('',#393008,#393040,#393048,.T.); +#393048 = LINE('',#393049,#393050); +#393049 = CARTESIAN_POINT('',(144.225,-130.55,1.51)); +#393050 = VECTOR('',#393051,1.); +#393051 = DIRECTION('',(0.,-1.,0.)); +#393052 = PLANE('',#393053); +#393053 = AXIS2_PLACEMENT_3D('',#393054,#393055,#393056); +#393054 = CARTESIAN_POINT('',(144.225,-130.55,1.51)); +#393055 = DIRECTION('',(1.,0.,-0.)); +#393056 = DIRECTION('',(0.,-1.,0.)); +#393057 = ADVANCED_FACE('',(#393058),#393085,.T.); +#393058 = FACE_BOUND('',#393059,.T.); +#393059 = EDGE_LOOP('',(#393060,#393061,#393070,#393078)); +#393060 = ORIENTED_EDGE('',*,*,#393039,.T.); +#393061 = ORIENTED_EDGE('',*,*,#393062,.T.); +#393062 = EDGE_CURVE('',#393032,#393063,#393065,.T.); +#393063 = VERTEX_POINT('',#393064); +#393064 = CARTESIAN_POINT('',(144.,-131.225,1.55)); +#393065 = CIRCLE('',#393066,0.225000087974); +#393066 = AXIS2_PLACEMENT_3D('',#393067,#393068,#393069); +#393067 = CARTESIAN_POINT('',(143.99999991202,-130.999999912,1.55)); +#393068 = DIRECTION('',(0.,0.,-1.)); +#393069 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#393070 = ORIENTED_EDGE('',*,*,#393071,.F.); +#393071 = EDGE_CURVE('',#393072,#393063,#393074,.T.); +#393072 = VERTEX_POINT('',#393073); +#393073 = CARTESIAN_POINT('',(144.,-131.225,1.51)); +#393074 = LINE('',#393075,#393076); +#393075 = CARTESIAN_POINT('',(144.,-131.225,1.51)); +#393076 = VECTOR('',#393077,1.); +#393077 = DIRECTION('',(0.,0.,1.)); +#393078 = ORIENTED_EDGE('',*,*,#393079,.F.); +#393079 = EDGE_CURVE('',#393040,#393072,#393080,.T.); +#393080 = CIRCLE('',#393081,0.225000087974); +#393081 = AXIS2_PLACEMENT_3D('',#393082,#393083,#393084); +#393082 = CARTESIAN_POINT('',(143.99999991202,-130.999999912,1.51)); +#393083 = DIRECTION('',(0.,0.,-1.)); +#393084 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#393085 = CYLINDRICAL_SURFACE('',#393086,0.225000087974); +#393086 = AXIS2_PLACEMENT_3D('',#393087,#393088,#393089); +#393087 = CARTESIAN_POINT('',(143.99999991202,-130.999999912,1.51)); +#393088 = DIRECTION('',(0.,0.,-1.)); +#393089 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#393090 = ADVANCED_FACE('',(#393091),#393116,.T.); +#393091 = FACE_BOUND('',#393092,.T.); +#393092 = EDGE_LOOP('',(#393093,#393094,#393102,#393110)); +#393093 = ORIENTED_EDGE('',*,*,#393071,.T.); +#393094 = ORIENTED_EDGE('',*,*,#393095,.T.); +#393095 = EDGE_CURVE('',#393063,#393096,#393098,.T.); +#393096 = VERTEX_POINT('',#393097); +#393097 = CARTESIAN_POINT('',(143.5,-131.225,1.55)); +#393098 = LINE('',#393099,#393100); +#393099 = CARTESIAN_POINT('',(144.,-131.225,1.55)); +#393100 = VECTOR('',#393101,1.); +#393101 = DIRECTION('',(-1.,0.,0.)); +#393102 = ORIENTED_EDGE('',*,*,#393103,.F.); +#393103 = EDGE_CURVE('',#393104,#393096,#393106,.T.); +#393104 = VERTEX_POINT('',#393105); +#393105 = CARTESIAN_POINT('',(143.5,-131.225,1.51)); +#393106 = LINE('',#393107,#393108); +#393107 = CARTESIAN_POINT('',(143.5,-131.225,1.51)); +#393108 = VECTOR('',#393109,1.); +#393109 = DIRECTION('',(0.,0.,1.)); +#393110 = ORIENTED_EDGE('',*,*,#393111,.F.); +#393111 = EDGE_CURVE('',#393072,#393104,#393112,.T.); +#393112 = LINE('',#393113,#393114); +#393113 = CARTESIAN_POINT('',(144.,-131.225,1.51)); +#393114 = VECTOR('',#393115,1.); +#393115 = DIRECTION('',(-1.,0.,0.)); +#393116 = PLANE('',#393117); +#393117 = AXIS2_PLACEMENT_3D('',#393118,#393119,#393120); +#393118 = CARTESIAN_POINT('',(144.,-131.225,1.51)); +#393119 = DIRECTION('',(0.,-1.,0.)); +#393120 = DIRECTION('',(-1.,0.,0.)); +#393121 = ADVANCED_FACE('',(#393122),#393149,.T.); +#393122 = FACE_BOUND('',#393123,.T.); +#393123 = EDGE_LOOP('',(#393124,#393125,#393134,#393142)); +#393124 = ORIENTED_EDGE('',*,*,#393103,.T.); +#393125 = ORIENTED_EDGE('',*,*,#393126,.T.); +#393126 = EDGE_CURVE('',#393096,#393127,#393129,.T.); +#393127 = VERTEX_POINT('',#393128); +#393128 = CARTESIAN_POINT('',(143.275,-131.,1.55)); +#393129 = CIRCLE('',#393130,0.225000087974); +#393130 = AXIS2_PLACEMENT_3D('',#393131,#393132,#393133); +#393131 = CARTESIAN_POINT('',(143.50000008797,-130.999999912,1.55)); +#393132 = DIRECTION('',(0.,0.,-1.)); +#393133 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#393134 = ORIENTED_EDGE('',*,*,#393135,.F.); +#393135 = EDGE_CURVE('',#393136,#393127,#393138,.T.); +#393136 = VERTEX_POINT('',#393137); +#393137 = CARTESIAN_POINT('',(143.275,-131.,1.51)); +#393138 = LINE('',#393139,#393140); +#393139 = CARTESIAN_POINT('',(143.275,-131.,1.51)); +#393140 = VECTOR('',#393141,1.); +#393141 = DIRECTION('',(0.,0.,1.)); +#393142 = ORIENTED_EDGE('',*,*,#393143,.F.); +#393143 = EDGE_CURVE('',#393104,#393136,#393144,.T.); +#393144 = CIRCLE('',#393145,0.225000087974); +#393145 = AXIS2_PLACEMENT_3D('',#393146,#393147,#393148); +#393146 = CARTESIAN_POINT('',(143.50000008797,-130.999999912,1.51)); +#393147 = DIRECTION('',(0.,0.,-1.)); +#393148 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#393149 = CYLINDRICAL_SURFACE('',#393150,0.225000087974); +#393150 = AXIS2_PLACEMENT_3D('',#393151,#393152,#393153); +#393151 = CARTESIAN_POINT('',(143.50000008797,-130.999999912,1.51)); +#393152 = DIRECTION('',(0.,0.,-1.)); +#393153 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#393154 = ADVANCED_FACE('',(#393155),#393171,.T.); +#393155 = FACE_BOUND('',#393156,.T.); +#393156 = EDGE_LOOP('',(#393157,#393158,#393164,#393165)); +#393157 = ORIENTED_EDGE('',*,*,#393135,.T.); +#393158 = ORIENTED_EDGE('',*,*,#393159,.T.); +#393159 = EDGE_CURVE('',#393127,#392927,#393160,.T.); +#393160 = LINE('',#393161,#393162); +#393161 = CARTESIAN_POINT('',(143.275,-131.,1.55)); +#393162 = VECTOR('',#393163,1.); +#393163 = DIRECTION('',(0.,1.,0.)); +#393164 = ORIENTED_EDGE('',*,*,#392924,.F.); +#393165 = ORIENTED_EDGE('',*,*,#393166,.F.); +#393166 = EDGE_CURVE('',#393136,#392925,#393167,.T.); +#393167 = LINE('',#393168,#393169); +#393168 = CARTESIAN_POINT('',(143.275,-131.,1.51)); +#393169 = VECTOR('',#393170,1.); +#393170 = DIRECTION('',(0.,1.,0.)); +#393171 = PLANE('',#393172); +#393172 = AXIS2_PLACEMENT_3D('',#393173,#393174,#393175); +#393173 = CARTESIAN_POINT('',(143.275,-131.,1.51)); +#393174 = DIRECTION('',(-1.,0.,0.)); +#393175 = DIRECTION('',(0.,1.,0.)); +#393176 = ADVANCED_FACE('',(#393177),#393187,.F.); +#393177 = FACE_BOUND('',#393178,.T.); +#393178 = EDGE_LOOP('',(#393179,#393180,#393181,#393182,#393183,#393184, + #393185,#393186)); +#393179 = ORIENTED_EDGE('',*,*,#392951,.T.); +#393180 = ORIENTED_EDGE('',*,*,#392983,.T.); +#393181 = ORIENTED_EDGE('',*,*,#393015,.T.); +#393182 = ORIENTED_EDGE('',*,*,#393047,.T.); +#393183 = ORIENTED_EDGE('',*,*,#393079,.T.); +#393184 = ORIENTED_EDGE('',*,*,#393111,.T.); +#393185 = ORIENTED_EDGE('',*,*,#393143,.T.); +#393186 = ORIENTED_EDGE('',*,*,#393166,.T.); +#393187 = PLANE('',#393188); +#393188 = AXIS2_PLACEMENT_3D('',#393189,#393190,#393191); +#393189 = CARTESIAN_POINT('',(0.,0.,1.51)); +#393190 = DIRECTION('',(0.,0.,1.)); +#393191 = DIRECTION('',(1.,0.,-0.)); +#393192 = ADVANCED_FACE('',(#393193),#393203,.T.); +#393193 = FACE_BOUND('',#393194,.F.); +#393194 = EDGE_LOOP('',(#393195,#393196,#393197,#393198,#393199,#393200, + #393201,#393202)); +#393195 = ORIENTED_EDGE('',*,*,#392934,.T.); +#393196 = ORIENTED_EDGE('',*,*,#392967,.T.); +#393197 = ORIENTED_EDGE('',*,*,#392998,.T.); +#393198 = ORIENTED_EDGE('',*,*,#393031,.T.); +#393199 = ORIENTED_EDGE('',*,*,#393062,.T.); +#393200 = ORIENTED_EDGE('',*,*,#393095,.T.); +#393201 = ORIENTED_EDGE('',*,*,#393126,.T.); +#393202 = ORIENTED_EDGE('',*,*,#393159,.T.); +#393203 = PLANE('',#393204); +#393204 = AXIS2_PLACEMENT_3D('',#393205,#393206,#393207); +#393205 = CARTESIAN_POINT('',(0.,0.,1.55)); +#393206 = DIRECTION('',(0.,0.,1.)); +#393207 = DIRECTION('',(1.,0.,-0.)); +#393208 = MANIFOLD_SOLID_BREP('',#393209); +#393209 = CLOSED_SHELL('',(#393210,#393243,#393263,#393283)); +#393210 = ADVANCED_FACE('',(#393211),#393238,.T.); +#393211 = FACE_BOUND('',#393212,.F.); +#393212 = EDGE_LOOP('',(#393213,#393223,#393230,#393231)); +#393213 = ORIENTED_EDGE('',*,*,#393214,.T.); +#393214 = EDGE_CURVE('',#393215,#393217,#393219,.T.); +#393215 = VERTEX_POINT('',#393216); +#393216 = CARTESIAN_POINT('',(141.025,-86.52,1.51)); +#393217 = VERTEX_POINT('',#393218); +#393218 = CARTESIAN_POINT('',(141.025,-86.52,1.55)); +#393219 = LINE('',#393220,#393221); +#393220 = CARTESIAN_POINT('',(141.025,-86.52,1.51)); +#393221 = VECTOR('',#393222,1.); +#393222 = DIRECTION('',(0.,0.,1.)); +#393223 = ORIENTED_EDGE('',*,*,#393224,.T.); +#393224 = EDGE_CURVE('',#393217,#393217,#393225,.T.); +#393225 = CIRCLE('',#393226,1.025); +#393226 = AXIS2_PLACEMENT_3D('',#393227,#393228,#393229); +#393227 = CARTESIAN_POINT('',(140.,-86.52,1.55)); +#393228 = DIRECTION('',(0.,0.,1.)); +#393229 = DIRECTION('',(1.,0.,-0.)); +#393230 = ORIENTED_EDGE('',*,*,#393214,.F.); +#393231 = ORIENTED_EDGE('',*,*,#393232,.F.); +#393232 = EDGE_CURVE('',#393215,#393215,#393233,.T.); +#393233 = CIRCLE('',#393234,1.025); +#393234 = AXIS2_PLACEMENT_3D('',#393235,#393236,#393237); +#393235 = CARTESIAN_POINT('',(140.,-86.52,1.51)); +#393236 = DIRECTION('',(0.,0.,1.)); +#393237 = DIRECTION('',(1.,0.,-0.)); +#393238 = CYLINDRICAL_SURFACE('',#393239,1.025); +#393239 = AXIS2_PLACEMENT_3D('',#393240,#393241,#393242); +#393240 = CARTESIAN_POINT('',(140.,-86.52,1.51)); +#393241 = DIRECTION('',(-0.,-0.,-1.)); +#393242 = DIRECTION('',(1.,0.,-0.)); +#393243 = ADVANCED_FACE('',(#393244,#393247),#393258,.F.); +#393244 = FACE_BOUND('',#393245,.F.); +#393245 = EDGE_LOOP('',(#393246)); +#393246 = ORIENTED_EDGE('',*,*,#393232,.T.); +#393247 = FACE_BOUND('',#393248,.F.); +#393248 = EDGE_LOOP('',(#393249)); +#393249 = ORIENTED_EDGE('',*,*,#393250,.T.); +#393250 = EDGE_CURVE('',#393251,#393251,#393253,.T.); +#393251 = VERTEX_POINT('',#393252); +#393252 = CARTESIAN_POINT('',(140.,-87.02,1.51)); +#393253 = CIRCLE('',#393254,0.5); +#393254 = AXIS2_PLACEMENT_3D('',#393255,#393256,#393257); +#393255 = CARTESIAN_POINT('',(140.,-86.52,1.51)); +#393256 = DIRECTION('',(-0.,0.,-1.)); +#393257 = DIRECTION('',(-0.,-1.,0.)); +#393258 = PLANE('',#393259); +#393259 = AXIS2_PLACEMENT_3D('',#393260,#393261,#393262); +#393260 = CARTESIAN_POINT('',(0.,0.,1.51)); +#393261 = DIRECTION('',(0.,0.,1.)); +#393262 = DIRECTION('',(1.,0.,-0.)); +#393263 = ADVANCED_FACE('',(#393264,#393267),#393278,.T.); +#393264 = FACE_BOUND('',#393265,.T.); +#393265 = EDGE_LOOP('',(#393266)); +#393266 = ORIENTED_EDGE('',*,*,#393224,.T.); +#393267 = FACE_BOUND('',#393268,.T.); +#393268 = EDGE_LOOP('',(#393269)); +#393269 = ORIENTED_EDGE('',*,*,#393270,.T.); +#393270 = EDGE_CURVE('',#393271,#393271,#393273,.T.); +#393271 = VERTEX_POINT('',#393272); +#393272 = CARTESIAN_POINT('',(140.,-87.02,1.55)); +#393273 = CIRCLE('',#393274,0.5); +#393274 = AXIS2_PLACEMENT_3D('',#393275,#393276,#393277); +#393275 = CARTESIAN_POINT('',(140.,-86.52,1.55)); +#393276 = DIRECTION('',(-0.,0.,-1.)); +#393277 = DIRECTION('',(-0.,-1.,0.)); +#393278 = PLANE('',#393279); +#393279 = AXIS2_PLACEMENT_3D('',#393280,#393281,#393282); +#393280 = CARTESIAN_POINT('',(0.,0.,1.55)); +#393281 = DIRECTION('',(0.,0.,1.)); +#393282 = DIRECTION('',(1.,0.,-0.)); +#393283 = ADVANCED_FACE('',(#393284),#393295,.F.); +#393284 = FACE_BOUND('',#393285,.T.); +#393285 = EDGE_LOOP('',(#393286,#393287,#393293,#393294)); +#393286 = ORIENTED_EDGE('',*,*,#393250,.T.); +#393287 = ORIENTED_EDGE('',*,*,#393288,.T.); +#393288 = EDGE_CURVE('',#393251,#393271,#393289,.T.); +#393289 = LINE('',#393290,#393291); +#393290 = CARTESIAN_POINT('',(140.,-87.02,-4.6E-02)); +#393291 = VECTOR('',#393292,1.); +#393292 = DIRECTION('',(0.,0.,1.)); +#393293 = ORIENTED_EDGE('',*,*,#393270,.F.); +#393294 = ORIENTED_EDGE('',*,*,#393288,.F.); +#393295 = CYLINDRICAL_SURFACE('',#393296,0.5); +#393296 = AXIS2_PLACEMENT_3D('',#393297,#393298,#393299); +#393297 = CARTESIAN_POINT('',(140.,-86.52,-4.6E-02)); +#393298 = DIRECTION('',(-0.,-0.,-1.)); +#393299 = DIRECTION('',(-0.,-1.,0.)); +#393300 = MANIFOLD_SOLID_BREP('',#393301); +#393301 = CLOSED_SHELL('',(#393302,#393335,#393355,#393375)); +#393302 = ADVANCED_FACE('',(#393303),#393330,.T.); +#393303 = FACE_BOUND('',#393304,.T.); +#393304 = EDGE_LOOP('',(#393305,#393315,#393322,#393323)); +#393305 = ORIENTED_EDGE('',*,*,#393306,.T.); +#393306 = EDGE_CURVE('',#393307,#393309,#393311,.T.); +#393307 = VERTEX_POINT('',#393308); +#393308 = CARTESIAN_POINT('',(141.025,-86.52,0.)); +#393309 = VERTEX_POINT('',#393310); +#393310 = CARTESIAN_POINT('',(141.025,-86.52,-4.E-02)); +#393311 = LINE('',#393312,#393313); +#393312 = CARTESIAN_POINT('',(141.025,-86.52,0.)); +#393313 = VECTOR('',#393314,1.); +#393314 = DIRECTION('',(0.,0.,-1.)); +#393315 = ORIENTED_EDGE('',*,*,#393316,.T.); +#393316 = EDGE_CURVE('',#393309,#393309,#393317,.T.); +#393317 = CIRCLE('',#393318,1.025); +#393318 = AXIS2_PLACEMENT_3D('',#393319,#393320,#393321); +#393319 = CARTESIAN_POINT('',(140.,-86.52,-4.E-02)); +#393320 = DIRECTION('',(0.,0.,1.)); +#393321 = DIRECTION('',(1.,0.,-0.)); +#393322 = ORIENTED_EDGE('',*,*,#393306,.F.); +#393323 = ORIENTED_EDGE('',*,*,#393324,.F.); +#393324 = EDGE_CURVE('',#393307,#393307,#393325,.T.); +#393325 = CIRCLE('',#393326,1.025); +#393326 = AXIS2_PLACEMENT_3D('',#393327,#393328,#393329); +#393327 = CARTESIAN_POINT('',(140.,-86.52,0.)); +#393328 = DIRECTION('',(0.,0.,1.)); +#393329 = DIRECTION('',(1.,0.,-0.)); +#393330 = CYLINDRICAL_SURFACE('',#393331,1.025); +#393331 = AXIS2_PLACEMENT_3D('',#393332,#393333,#393334); +#393332 = CARTESIAN_POINT('',(140.,-86.52,0.)); +#393333 = DIRECTION('',(0.,0.,1.)); +#393334 = DIRECTION('',(1.,0.,-0.)); +#393335 = ADVANCED_FACE('',(#393336,#393339),#393350,.F.); +#393336 = FACE_BOUND('',#393337,.F.); +#393337 = EDGE_LOOP('',(#393338)); +#393338 = ORIENTED_EDGE('',*,*,#393324,.F.); +#393339 = FACE_BOUND('',#393340,.F.); +#393340 = EDGE_LOOP('',(#393341)); +#393341 = ORIENTED_EDGE('',*,*,#393342,.F.); +#393342 = EDGE_CURVE('',#393343,#393343,#393345,.T.); +#393343 = VERTEX_POINT('',#393344); +#393344 = CARTESIAN_POINT('',(140.,-87.02,0.)); +#393345 = CIRCLE('',#393346,0.5); +#393346 = AXIS2_PLACEMENT_3D('',#393347,#393348,#393349); +#393347 = CARTESIAN_POINT('',(140.,-86.52,0.)); +#393348 = DIRECTION('',(-0.,0.,-1.)); +#393349 = DIRECTION('',(-0.,-1.,0.)); +#393350 = PLANE('',#393351); +#393351 = AXIS2_PLACEMENT_3D('',#393352,#393353,#393354); +#393352 = CARTESIAN_POINT('',(0.,0.,0.)); +#393353 = DIRECTION('',(-0.,-0.,-1.)); +#393354 = DIRECTION('',(-1.,0.,0.)); +#393355 = ADVANCED_FACE('',(#393356,#393359),#393370,.T.); +#393356 = FACE_BOUND('',#393357,.T.); +#393357 = EDGE_LOOP('',(#393358)); +#393358 = ORIENTED_EDGE('',*,*,#393316,.F.); +#393359 = FACE_BOUND('',#393360,.T.); +#393360 = EDGE_LOOP('',(#393361)); +#393361 = ORIENTED_EDGE('',*,*,#393362,.F.); +#393362 = EDGE_CURVE('',#393363,#393363,#393365,.T.); +#393363 = VERTEX_POINT('',#393364); +#393364 = CARTESIAN_POINT('',(140.,-87.02,-4.E-02)); +#393365 = CIRCLE('',#393366,0.5); +#393366 = AXIS2_PLACEMENT_3D('',#393367,#393368,#393369); +#393367 = CARTESIAN_POINT('',(140.,-86.52,-4.E-02)); +#393368 = DIRECTION('',(-0.,0.,-1.)); +#393369 = DIRECTION('',(-0.,-1.,0.)); +#393370 = PLANE('',#393371); +#393371 = AXIS2_PLACEMENT_3D('',#393372,#393373,#393374); +#393372 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#393373 = DIRECTION('',(-0.,-0.,-1.)); +#393374 = DIRECTION('',(-1.,0.,0.)); +#393375 = ADVANCED_FACE('',(#393376),#393387,.F.); +#393376 = FACE_BOUND('',#393377,.T.); +#393377 = EDGE_LOOP('',(#393378,#393379,#393385,#393386)); +#393378 = ORIENTED_EDGE('',*,*,#393362,.T.); +#393379 = ORIENTED_EDGE('',*,*,#393380,.T.); +#393380 = EDGE_CURVE('',#393363,#393343,#393381,.T.); +#393381 = LINE('',#393382,#393383); +#393382 = CARTESIAN_POINT('',(140.,-87.02,-4.6E-02)); +#393383 = VECTOR('',#393384,1.); +#393384 = DIRECTION('',(0.,0.,1.)); +#393385 = ORIENTED_EDGE('',*,*,#393342,.F.); +#393386 = ORIENTED_EDGE('',*,*,#393380,.F.); +#393387 = CYLINDRICAL_SURFACE('',#393388,0.5); +#393388 = AXIS2_PLACEMENT_3D('',#393389,#393390,#393391); +#393389 = CARTESIAN_POINT('',(140.,-86.52,-4.6E-02)); +#393390 = DIRECTION('',(-0.,-0.,-1.)); +#393391 = DIRECTION('',(-0.,-1.,0.)); +#393392 = MANIFOLD_SOLID_BREP('',#393393); +#393393 = CLOSED_SHELL('',(#393394,#393427,#393447,#393467)); +#393394 = ADVANCED_FACE('',(#393395),#393422,.T.); +#393395 = FACE_BOUND('',#393396,.F.); +#393396 = EDGE_LOOP('',(#393397,#393407,#393414,#393415)); +#393397 = ORIENTED_EDGE('',*,*,#393398,.T.); +#393398 = EDGE_CURVE('',#393399,#393401,#393403,.T.); +#393399 = VERTEX_POINT('',#393400); +#393400 = CARTESIAN_POINT('',(140.,-87.045,-4.E-02)); +#393401 = VERTEX_POINT('',#393402); +#393402 = CARTESIAN_POINT('',(140.,-87.045,1.55)); +#393403 = LINE('',#393404,#393405); +#393404 = CARTESIAN_POINT('',(140.,-87.045,-4.E-02)); +#393405 = VECTOR('',#393406,1.); +#393406 = DIRECTION('',(0.,0.,1.)); +#393407 = ORIENTED_EDGE('',*,*,#393408,.T.); +#393408 = EDGE_CURVE('',#393401,#393401,#393409,.T.); +#393409 = CIRCLE('',#393410,0.525); +#393410 = AXIS2_PLACEMENT_3D('',#393411,#393412,#393413); +#393411 = CARTESIAN_POINT('',(140.,-86.52,1.55)); +#393412 = DIRECTION('',(0.,0.,1.)); +#393413 = DIRECTION('',(-0.,-1.,0.)); +#393414 = ORIENTED_EDGE('',*,*,#393398,.F.); +#393415 = ORIENTED_EDGE('',*,*,#393416,.F.); +#393416 = EDGE_CURVE('',#393399,#393399,#393417,.T.); +#393417 = CIRCLE('',#393418,0.525); +#393418 = AXIS2_PLACEMENT_3D('',#393419,#393420,#393421); +#393419 = CARTESIAN_POINT('',(140.,-86.52,-4.E-02)); +#393420 = DIRECTION('',(0.,0.,1.)); +#393421 = DIRECTION('',(-0.,-1.,0.)); +#393422 = CYLINDRICAL_SURFACE('',#393423,0.525); +#393423 = AXIS2_PLACEMENT_3D('',#393424,#393425,#393426); +#393424 = CARTESIAN_POINT('',(140.,-86.52,-4.E-02)); +#393425 = DIRECTION('',(-0.,-0.,-1.)); +#393426 = DIRECTION('',(-0.,-1.,0.)); +#393427 = ADVANCED_FACE('',(#393428,#393431),#393442,.F.); +#393428 = FACE_BOUND('',#393429,.F.); +#393429 = EDGE_LOOP('',(#393430)); +#393430 = ORIENTED_EDGE('',*,*,#393416,.T.); +#393431 = FACE_BOUND('',#393432,.F.); +#393432 = EDGE_LOOP('',(#393433)); +#393433 = ORIENTED_EDGE('',*,*,#393434,.T.); +#393434 = EDGE_CURVE('',#393435,#393435,#393437,.T.); +#393435 = VERTEX_POINT('',#393436); +#393436 = CARTESIAN_POINT('',(140.,-87.02,-4.E-02)); +#393437 = CIRCLE('',#393438,0.5); +#393438 = AXIS2_PLACEMENT_3D('',#393439,#393440,#393441); +#393439 = CARTESIAN_POINT('',(140.,-86.52,-4.E-02)); +#393440 = DIRECTION('',(-0.,0.,-1.)); +#393441 = DIRECTION('',(-0.,-1.,0.)); +#393442 = PLANE('',#393443); +#393443 = AXIS2_PLACEMENT_3D('',#393444,#393445,#393446); +#393444 = CARTESIAN_POINT('',(140.,-87.045,-4.E-02)); +#393445 = DIRECTION('',(0.,0.,1.)); +#393446 = DIRECTION('',(1.,0.,-0.)); +#393447 = ADVANCED_FACE('',(#393448,#393451),#393462,.T.); +#393448 = FACE_BOUND('',#393449,.T.); +#393449 = EDGE_LOOP('',(#393450)); +#393450 = ORIENTED_EDGE('',*,*,#393408,.T.); +#393451 = FACE_BOUND('',#393452,.T.); +#393452 = EDGE_LOOP('',(#393453)); +#393453 = ORIENTED_EDGE('',*,*,#393454,.T.); +#393454 = EDGE_CURVE('',#393455,#393455,#393457,.T.); +#393455 = VERTEX_POINT('',#393456); +#393456 = CARTESIAN_POINT('',(140.,-87.02,1.55)); +#393457 = CIRCLE('',#393458,0.5); +#393458 = AXIS2_PLACEMENT_3D('',#393459,#393460,#393461); +#393459 = CARTESIAN_POINT('',(140.,-86.52,1.55)); +#393460 = DIRECTION('',(-0.,0.,-1.)); +#393461 = DIRECTION('',(-0.,-1.,0.)); +#393462 = PLANE('',#393463); +#393463 = AXIS2_PLACEMENT_3D('',#393464,#393465,#393466); +#393464 = CARTESIAN_POINT('',(140.,-87.045,1.55)); +#393465 = DIRECTION('',(0.,0.,1.)); +#393466 = DIRECTION('',(1.,0.,-0.)); +#393467 = ADVANCED_FACE('',(#393468),#393479,.F.); +#393468 = FACE_BOUND('',#393469,.T.); +#393469 = EDGE_LOOP('',(#393470,#393471,#393477,#393478)); +#393470 = ORIENTED_EDGE('',*,*,#393434,.T.); +#393471 = ORIENTED_EDGE('',*,*,#393472,.T.); +#393472 = EDGE_CURVE('',#393435,#393455,#393473,.T.); +#393473 = LINE('',#393474,#393475); +#393474 = CARTESIAN_POINT('',(140.,-87.02,-4.6E-02)); +#393475 = VECTOR('',#393476,1.); +#393476 = DIRECTION('',(0.,0.,1.)); +#393477 = ORIENTED_EDGE('',*,*,#393454,.F.); +#393478 = ORIENTED_EDGE('',*,*,#393472,.F.); +#393479 = CYLINDRICAL_SURFACE('',#393480,0.5); +#393480 = AXIS2_PLACEMENT_3D('',#393481,#393482,#393483); +#393481 = CARTESIAN_POINT('',(140.,-86.52,-4.6E-02)); +#393482 = DIRECTION('',(-0.,-0.,-1.)); +#393483 = DIRECTION('',(-0.,-1.,0.)); +#393484 = MANIFOLD_SOLID_BREP('',#393485); +#393485 = CLOSED_SHELL('',(#393486,#393519,#393539,#393559)); +#393486 = ADVANCED_FACE('',(#393487),#393514,.T.); +#393487 = FACE_BOUND('',#393488,.F.); +#393488 = EDGE_LOOP('',(#393489,#393499,#393506,#393507)); +#393489 = ORIENTED_EDGE('',*,*,#393490,.T.); +#393490 = EDGE_CURVE('',#393491,#393493,#393495,.T.); +#393491 = VERTEX_POINT('',#393492); +#393492 = CARTESIAN_POINT('',(147.255,-97.75,1.51)); +#393493 = VERTEX_POINT('',#393494); +#393494 = CARTESIAN_POINT('',(147.255,-97.75,1.55)); +#393495 = LINE('',#393496,#393497); +#393496 = CARTESIAN_POINT('',(147.255,-97.75,1.51)); +#393497 = VECTOR('',#393498,1.); +#393498 = DIRECTION('',(0.,0.,1.)); +#393499 = ORIENTED_EDGE('',*,*,#393500,.T.); +#393500 = EDGE_CURVE('',#393493,#393493,#393501,.T.); +#393501 = CIRCLE('',#393502,1.025); +#393502 = AXIS2_PLACEMENT_3D('',#393503,#393504,#393505); +#393503 = CARTESIAN_POINT('',(146.23,-97.75,1.55)); +#393504 = DIRECTION('',(0.,0.,1.)); +#393505 = DIRECTION('',(1.,0.,-0.)); +#393506 = ORIENTED_EDGE('',*,*,#393490,.F.); +#393507 = ORIENTED_EDGE('',*,*,#393508,.F.); +#393508 = EDGE_CURVE('',#393491,#393491,#393509,.T.); +#393509 = CIRCLE('',#393510,1.025); +#393510 = AXIS2_PLACEMENT_3D('',#393511,#393512,#393513); +#393511 = CARTESIAN_POINT('',(146.23,-97.75,1.51)); +#393512 = DIRECTION('',(0.,0.,1.)); +#393513 = DIRECTION('',(1.,0.,-0.)); +#393514 = CYLINDRICAL_SURFACE('',#393515,1.025); +#393515 = AXIS2_PLACEMENT_3D('',#393516,#393517,#393518); +#393516 = CARTESIAN_POINT('',(146.23,-97.75,1.51)); +#393517 = DIRECTION('',(-0.,-0.,-1.)); +#393518 = DIRECTION('',(1.,0.,-0.)); +#393519 = ADVANCED_FACE('',(#393520,#393523),#393534,.F.); +#393520 = FACE_BOUND('',#393521,.F.); +#393521 = EDGE_LOOP('',(#393522)); +#393522 = ORIENTED_EDGE('',*,*,#393508,.T.); +#393523 = FACE_BOUND('',#393524,.F.); +#393524 = EDGE_LOOP('',(#393525)); +#393525 = ORIENTED_EDGE('',*,*,#393526,.T.); +#393526 = EDGE_CURVE('',#393527,#393527,#393529,.T.); +#393527 = VERTEX_POINT('',#393528); +#393528 = CARTESIAN_POINT('',(146.23,-98.25,1.51)); +#393529 = CIRCLE('',#393530,0.5); +#393530 = AXIS2_PLACEMENT_3D('',#393531,#393532,#393533); +#393531 = CARTESIAN_POINT('',(146.23,-97.75,1.51)); +#393532 = DIRECTION('',(-0.,0.,-1.)); +#393533 = DIRECTION('',(-0.,-1.,0.)); +#393534 = PLANE('',#393535); +#393535 = AXIS2_PLACEMENT_3D('',#393536,#393537,#393538); +#393536 = CARTESIAN_POINT('',(0.,0.,1.51)); +#393537 = DIRECTION('',(0.,0.,1.)); +#393538 = DIRECTION('',(1.,0.,-0.)); +#393539 = ADVANCED_FACE('',(#393540,#393543),#393554,.T.); +#393540 = FACE_BOUND('',#393541,.T.); +#393541 = EDGE_LOOP('',(#393542)); +#393542 = ORIENTED_EDGE('',*,*,#393500,.T.); +#393543 = FACE_BOUND('',#393544,.T.); +#393544 = EDGE_LOOP('',(#393545)); +#393545 = ORIENTED_EDGE('',*,*,#393546,.T.); +#393546 = EDGE_CURVE('',#393547,#393547,#393549,.T.); +#393547 = VERTEX_POINT('',#393548); +#393548 = CARTESIAN_POINT('',(146.23,-98.25,1.55)); +#393549 = CIRCLE('',#393550,0.5); +#393550 = AXIS2_PLACEMENT_3D('',#393551,#393552,#393553); +#393551 = CARTESIAN_POINT('',(146.23,-97.75,1.55)); +#393552 = DIRECTION('',(-0.,0.,-1.)); +#393553 = DIRECTION('',(-0.,-1.,0.)); +#393554 = PLANE('',#393555); +#393555 = AXIS2_PLACEMENT_3D('',#393556,#393557,#393558); +#393556 = CARTESIAN_POINT('',(0.,0.,1.55)); +#393557 = DIRECTION('',(0.,0.,1.)); +#393558 = DIRECTION('',(1.,0.,-0.)); +#393559 = ADVANCED_FACE('',(#393560),#393571,.F.); +#393560 = FACE_BOUND('',#393561,.T.); +#393561 = EDGE_LOOP('',(#393562,#393563,#393569,#393570)); +#393562 = ORIENTED_EDGE('',*,*,#393526,.T.); +#393563 = ORIENTED_EDGE('',*,*,#393564,.T.); +#393564 = EDGE_CURVE('',#393527,#393547,#393565,.T.); +#393565 = LINE('',#393566,#393567); +#393566 = CARTESIAN_POINT('',(146.23,-98.25,-4.6E-02)); +#393567 = VECTOR('',#393568,1.); +#393568 = DIRECTION('',(0.,0.,1.)); +#393569 = ORIENTED_EDGE('',*,*,#393546,.F.); +#393570 = ORIENTED_EDGE('',*,*,#393564,.F.); +#393571 = CYLINDRICAL_SURFACE('',#393572,0.5); +#393572 = AXIS2_PLACEMENT_3D('',#393573,#393574,#393575); +#393573 = CARTESIAN_POINT('',(146.23,-97.75,-4.6E-02)); +#393574 = DIRECTION('',(-0.,-0.,-1.)); +#393575 = DIRECTION('',(-0.,-1.,0.)); +#393576 = MANIFOLD_SOLID_BREP('',#393577); +#393577 = CLOSED_SHELL('',(#393578,#393611,#393631,#393651)); +#393578 = ADVANCED_FACE('',(#393579),#393606,.T.); +#393579 = FACE_BOUND('',#393580,.T.); +#393580 = EDGE_LOOP('',(#393581,#393591,#393598,#393599)); +#393581 = ORIENTED_EDGE('',*,*,#393582,.T.); +#393582 = EDGE_CURVE('',#393583,#393585,#393587,.T.); +#393583 = VERTEX_POINT('',#393584); +#393584 = CARTESIAN_POINT('',(147.255,-97.75,0.)); +#393585 = VERTEX_POINT('',#393586); +#393586 = CARTESIAN_POINT('',(147.255,-97.75,-4.E-02)); +#393587 = LINE('',#393588,#393589); +#393588 = CARTESIAN_POINT('',(147.255,-97.75,0.)); +#393589 = VECTOR('',#393590,1.); +#393590 = DIRECTION('',(0.,0.,-1.)); +#393591 = ORIENTED_EDGE('',*,*,#393592,.T.); +#393592 = EDGE_CURVE('',#393585,#393585,#393593,.T.); +#393593 = CIRCLE('',#393594,1.025); +#393594 = AXIS2_PLACEMENT_3D('',#393595,#393596,#393597); +#393595 = CARTESIAN_POINT('',(146.23,-97.75,-4.E-02)); +#393596 = DIRECTION('',(0.,0.,1.)); +#393597 = DIRECTION('',(1.,0.,-0.)); +#393598 = ORIENTED_EDGE('',*,*,#393582,.F.); +#393599 = ORIENTED_EDGE('',*,*,#393600,.F.); +#393600 = EDGE_CURVE('',#393583,#393583,#393601,.T.); +#393601 = CIRCLE('',#393602,1.025); +#393602 = AXIS2_PLACEMENT_3D('',#393603,#393604,#393605); +#393603 = CARTESIAN_POINT('',(146.23,-97.75,0.)); +#393604 = DIRECTION('',(0.,0.,1.)); +#393605 = DIRECTION('',(1.,0.,-0.)); +#393606 = CYLINDRICAL_SURFACE('',#393607,1.025); +#393607 = AXIS2_PLACEMENT_3D('',#393608,#393609,#393610); +#393608 = CARTESIAN_POINT('',(146.23,-97.75,0.)); +#393609 = DIRECTION('',(0.,0.,1.)); +#393610 = DIRECTION('',(1.,0.,-0.)); +#393611 = ADVANCED_FACE('',(#393612,#393615),#393626,.F.); +#393612 = FACE_BOUND('',#393613,.F.); +#393613 = EDGE_LOOP('',(#393614)); +#393614 = ORIENTED_EDGE('',*,*,#393600,.F.); +#393615 = FACE_BOUND('',#393616,.F.); +#393616 = EDGE_LOOP('',(#393617)); +#393617 = ORIENTED_EDGE('',*,*,#393618,.F.); +#393618 = EDGE_CURVE('',#393619,#393619,#393621,.T.); +#393619 = VERTEX_POINT('',#393620); +#393620 = CARTESIAN_POINT('',(146.23,-98.25,0.)); +#393621 = CIRCLE('',#393622,0.5); +#393622 = AXIS2_PLACEMENT_3D('',#393623,#393624,#393625); +#393623 = CARTESIAN_POINT('',(146.23,-97.75,0.)); +#393624 = DIRECTION('',(-0.,0.,-1.)); +#393625 = DIRECTION('',(-0.,-1.,0.)); +#393626 = PLANE('',#393627); +#393627 = AXIS2_PLACEMENT_3D('',#393628,#393629,#393630); +#393628 = CARTESIAN_POINT('',(0.,0.,0.)); +#393629 = DIRECTION('',(-0.,-0.,-1.)); +#393630 = DIRECTION('',(-1.,0.,0.)); +#393631 = ADVANCED_FACE('',(#393632,#393635),#393646,.T.); +#393632 = FACE_BOUND('',#393633,.T.); +#393633 = EDGE_LOOP('',(#393634)); +#393634 = ORIENTED_EDGE('',*,*,#393592,.F.); +#393635 = FACE_BOUND('',#393636,.T.); +#393636 = EDGE_LOOP('',(#393637)); +#393637 = ORIENTED_EDGE('',*,*,#393638,.F.); +#393638 = EDGE_CURVE('',#393639,#393639,#393641,.T.); +#393639 = VERTEX_POINT('',#393640); +#393640 = CARTESIAN_POINT('',(146.23,-98.25,-4.E-02)); +#393641 = CIRCLE('',#393642,0.5); +#393642 = AXIS2_PLACEMENT_3D('',#393643,#393644,#393645); +#393643 = CARTESIAN_POINT('',(146.23,-97.75,-4.E-02)); +#393644 = DIRECTION('',(-0.,0.,-1.)); +#393645 = DIRECTION('',(-0.,-1.,0.)); +#393646 = PLANE('',#393647); +#393647 = AXIS2_PLACEMENT_3D('',#393648,#393649,#393650); +#393648 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#393649 = DIRECTION('',(-0.,-0.,-1.)); +#393650 = DIRECTION('',(-1.,0.,0.)); +#393651 = ADVANCED_FACE('',(#393652),#393663,.F.); +#393652 = FACE_BOUND('',#393653,.T.); +#393653 = EDGE_LOOP('',(#393654,#393655,#393661,#393662)); +#393654 = ORIENTED_EDGE('',*,*,#393638,.T.); +#393655 = ORIENTED_EDGE('',*,*,#393656,.T.); +#393656 = EDGE_CURVE('',#393639,#393619,#393657,.T.); +#393657 = LINE('',#393658,#393659); +#393658 = CARTESIAN_POINT('',(146.23,-98.25,-4.6E-02)); +#393659 = VECTOR('',#393660,1.); +#393660 = DIRECTION('',(0.,0.,1.)); +#393661 = ORIENTED_EDGE('',*,*,#393618,.F.); +#393662 = ORIENTED_EDGE('',*,*,#393656,.F.); +#393663 = CYLINDRICAL_SURFACE('',#393664,0.5); +#393664 = AXIS2_PLACEMENT_3D('',#393665,#393666,#393667); +#393665 = CARTESIAN_POINT('',(146.23,-97.75,-4.6E-02)); +#393666 = DIRECTION('',(-0.,-0.,-1.)); +#393667 = DIRECTION('',(-0.,-1.,0.)); +#393668 = MANIFOLD_SOLID_BREP('',#393669); +#393669 = CLOSED_SHELL('',(#393670,#393703,#393723,#393743)); +#393670 = ADVANCED_FACE('',(#393671),#393698,.T.); +#393671 = FACE_BOUND('',#393672,.F.); +#393672 = EDGE_LOOP('',(#393673,#393683,#393690,#393691)); +#393673 = ORIENTED_EDGE('',*,*,#393674,.T.); +#393674 = EDGE_CURVE('',#393675,#393677,#393679,.T.); +#393675 = VERTEX_POINT('',#393676); +#393676 = CARTESIAN_POINT('',(146.23,-98.275,-4.E-02)); +#393677 = VERTEX_POINT('',#393678); +#393678 = CARTESIAN_POINT('',(146.23,-98.275,1.55)); +#393679 = LINE('',#393680,#393681); +#393680 = CARTESIAN_POINT('',(146.23,-98.275,-4.E-02)); +#393681 = VECTOR('',#393682,1.); +#393682 = DIRECTION('',(0.,0.,1.)); +#393683 = ORIENTED_EDGE('',*,*,#393684,.T.); +#393684 = EDGE_CURVE('',#393677,#393677,#393685,.T.); +#393685 = CIRCLE('',#393686,0.525); +#393686 = AXIS2_PLACEMENT_3D('',#393687,#393688,#393689); +#393687 = CARTESIAN_POINT('',(146.23,-97.75,1.55)); +#393688 = DIRECTION('',(0.,0.,1.)); +#393689 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#393690 = ORIENTED_EDGE('',*,*,#393674,.F.); +#393691 = ORIENTED_EDGE('',*,*,#393692,.F.); +#393692 = EDGE_CURVE('',#393675,#393675,#393693,.T.); +#393693 = CIRCLE('',#393694,0.525); +#393694 = AXIS2_PLACEMENT_3D('',#393695,#393696,#393697); +#393695 = CARTESIAN_POINT('',(146.23,-97.75,-4.E-02)); +#393696 = DIRECTION('',(0.,0.,1.)); +#393697 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#393698 = CYLINDRICAL_SURFACE('',#393699,0.525); +#393699 = AXIS2_PLACEMENT_3D('',#393700,#393701,#393702); +#393700 = CARTESIAN_POINT('',(146.23,-97.75,-4.E-02)); +#393701 = DIRECTION('',(-0.,-0.,-1.)); +#393702 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#393703 = ADVANCED_FACE('',(#393704,#393707),#393718,.F.); +#393704 = FACE_BOUND('',#393705,.F.); +#393705 = EDGE_LOOP('',(#393706)); +#393706 = ORIENTED_EDGE('',*,*,#393692,.T.); +#393707 = FACE_BOUND('',#393708,.F.); +#393708 = EDGE_LOOP('',(#393709)); +#393709 = ORIENTED_EDGE('',*,*,#393710,.T.); +#393710 = EDGE_CURVE('',#393711,#393711,#393713,.T.); +#393711 = VERTEX_POINT('',#393712); +#393712 = CARTESIAN_POINT('',(146.23,-98.25,-4.E-02)); +#393713 = CIRCLE('',#393714,0.5); +#393714 = AXIS2_PLACEMENT_3D('',#393715,#393716,#393717); +#393715 = CARTESIAN_POINT('',(146.23,-97.75,-4.E-02)); +#393716 = DIRECTION('',(-0.,0.,-1.)); +#393717 = DIRECTION('',(-0.,-1.,0.)); +#393718 = PLANE('',#393719); +#393719 = AXIS2_PLACEMENT_3D('',#393720,#393721,#393722); +#393720 = CARTESIAN_POINT('',(146.23,-98.275,-4.E-02)); +#393721 = DIRECTION('',(0.,0.,1.)); +#393722 = DIRECTION('',(1.,0.,-0.)); +#393723 = ADVANCED_FACE('',(#393724,#393727),#393738,.T.); +#393724 = FACE_BOUND('',#393725,.T.); +#393725 = EDGE_LOOP('',(#393726)); +#393726 = ORIENTED_EDGE('',*,*,#393684,.T.); +#393727 = FACE_BOUND('',#393728,.T.); +#393728 = EDGE_LOOP('',(#393729)); +#393729 = ORIENTED_EDGE('',*,*,#393730,.T.); +#393730 = EDGE_CURVE('',#393731,#393731,#393733,.T.); +#393731 = VERTEX_POINT('',#393732); +#393732 = CARTESIAN_POINT('',(146.23,-98.25,1.55)); +#393733 = CIRCLE('',#393734,0.5); +#393734 = AXIS2_PLACEMENT_3D('',#393735,#393736,#393737); +#393735 = CARTESIAN_POINT('',(146.23,-97.75,1.55)); +#393736 = DIRECTION('',(-0.,0.,-1.)); +#393737 = DIRECTION('',(-0.,-1.,0.)); +#393738 = PLANE('',#393739); +#393739 = AXIS2_PLACEMENT_3D('',#393740,#393741,#393742); +#393740 = CARTESIAN_POINT('',(146.23,-98.275,1.55)); +#393741 = DIRECTION('',(0.,0.,1.)); +#393742 = DIRECTION('',(1.,0.,-0.)); +#393743 = ADVANCED_FACE('',(#393744),#393755,.F.); +#393744 = FACE_BOUND('',#393745,.T.); +#393745 = EDGE_LOOP('',(#393746,#393747,#393753,#393754)); +#393746 = ORIENTED_EDGE('',*,*,#393710,.T.); +#393747 = ORIENTED_EDGE('',*,*,#393748,.T.); +#393748 = EDGE_CURVE('',#393711,#393731,#393749,.T.); +#393749 = LINE('',#393750,#393751); +#393750 = CARTESIAN_POINT('',(146.23,-98.25,-4.6E-02)); +#393751 = VECTOR('',#393752,1.); +#393752 = DIRECTION('',(0.,0.,1.)); +#393753 = ORIENTED_EDGE('',*,*,#393730,.F.); +#393754 = ORIENTED_EDGE('',*,*,#393748,.F.); +#393755 = CYLINDRICAL_SURFACE('',#393756,0.5); +#393756 = AXIS2_PLACEMENT_3D('',#393757,#393758,#393759); +#393757 = CARTESIAN_POINT('',(146.23,-97.75,-4.6E-02)); +#393758 = DIRECTION('',(-0.,-0.,-1.)); +#393759 = DIRECTION('',(-0.,-1.,0.)); +#393760 = MANIFOLD_SOLID_BREP('',#393761); +#393761 = CLOSED_SHELL('',(#393762,#393795,#393815,#393835)); +#393762 = ADVANCED_FACE('',(#393763),#393790,.T.); +#393763 = FACE_BOUND('',#393764,.F.); +#393764 = EDGE_LOOP('',(#393765,#393775,#393782,#393783)); +#393765 = ORIENTED_EDGE('',*,*,#393766,.T.); +#393766 = EDGE_CURVE('',#393767,#393769,#393771,.T.); +#393767 = VERTEX_POINT('',#393768); +#393768 = CARTESIAN_POINT('',(135.374999,-105.5,1.51)); +#393769 = VERTEX_POINT('',#393770); +#393770 = CARTESIAN_POINT('',(135.374999,-105.5,1.55)); +#393771 = LINE('',#393772,#393773); +#393772 = CARTESIAN_POINT('',(135.374999,-105.5,1.51)); +#393773 = VECTOR('',#393774,1.); +#393774 = DIRECTION('',(0.,0.,1.)); +#393775 = ORIENTED_EDGE('',*,*,#393776,.T.); +#393776 = EDGE_CURVE('',#393769,#393769,#393777,.T.); +#393777 = CIRCLE('',#393778,1.124999); +#393778 = AXIS2_PLACEMENT_3D('',#393779,#393780,#393781); +#393779 = CARTESIAN_POINT('',(134.25,-105.5,1.55)); +#393780 = DIRECTION('',(0.,0.,1.)); +#393781 = DIRECTION('',(1.,0.,-0.)); +#393782 = ORIENTED_EDGE('',*,*,#393766,.F.); +#393783 = ORIENTED_EDGE('',*,*,#393784,.F.); +#393784 = EDGE_CURVE('',#393767,#393767,#393785,.T.); +#393785 = CIRCLE('',#393786,1.124999); +#393786 = AXIS2_PLACEMENT_3D('',#393787,#393788,#393789); +#393787 = CARTESIAN_POINT('',(134.25,-105.5,1.51)); +#393788 = DIRECTION('',(0.,0.,1.)); +#393789 = DIRECTION('',(1.,0.,-0.)); +#393790 = CYLINDRICAL_SURFACE('',#393791,1.124999); +#393791 = AXIS2_PLACEMENT_3D('',#393792,#393793,#393794); +#393792 = CARTESIAN_POINT('',(134.25,-105.5,1.51)); +#393793 = DIRECTION('',(-0.,-0.,-1.)); +#393794 = DIRECTION('',(1.,0.,-0.)); +#393795 = ADVANCED_FACE('',(#393796,#393799),#393810,.F.); +#393796 = FACE_BOUND('',#393797,.F.); +#393797 = EDGE_LOOP('',(#393798)); +#393798 = ORIENTED_EDGE('',*,*,#393784,.T.); +#393799 = FACE_BOUND('',#393800,.F.); +#393800 = EDGE_LOOP('',(#393801)); +#393801 = ORIENTED_EDGE('',*,*,#393802,.T.); +#393802 = EDGE_CURVE('',#393803,#393803,#393805,.T.); +#393803 = VERTEX_POINT('',#393804); +#393804 = CARTESIAN_POINT('',(134.25,-106.1,1.51)); +#393805 = CIRCLE('',#393806,0.6); +#393806 = AXIS2_PLACEMENT_3D('',#393807,#393808,#393809); +#393807 = CARTESIAN_POINT('',(134.25,-105.5,1.51)); +#393808 = DIRECTION('',(-0.,0.,-1.)); +#393809 = DIRECTION('',(-0.,-1.,0.)); +#393810 = PLANE('',#393811); +#393811 = AXIS2_PLACEMENT_3D('',#393812,#393813,#393814); +#393812 = CARTESIAN_POINT('',(0.,0.,1.51)); +#393813 = DIRECTION('',(0.,0.,1.)); +#393814 = DIRECTION('',(1.,0.,-0.)); +#393815 = ADVANCED_FACE('',(#393816,#393819),#393830,.T.); +#393816 = FACE_BOUND('',#393817,.T.); +#393817 = EDGE_LOOP('',(#393818)); +#393818 = ORIENTED_EDGE('',*,*,#393776,.T.); +#393819 = FACE_BOUND('',#393820,.T.); +#393820 = EDGE_LOOP('',(#393821)); +#393821 = ORIENTED_EDGE('',*,*,#393822,.T.); +#393822 = EDGE_CURVE('',#393823,#393823,#393825,.T.); +#393823 = VERTEX_POINT('',#393824); +#393824 = CARTESIAN_POINT('',(134.25,-106.1,1.55)); +#393825 = CIRCLE('',#393826,0.6); +#393826 = AXIS2_PLACEMENT_3D('',#393827,#393828,#393829); +#393827 = CARTESIAN_POINT('',(134.25,-105.5,1.55)); +#393828 = DIRECTION('',(-0.,0.,-1.)); +#393829 = DIRECTION('',(-0.,-1.,0.)); +#393830 = PLANE('',#393831); +#393831 = AXIS2_PLACEMENT_3D('',#393832,#393833,#393834); +#393832 = CARTESIAN_POINT('',(0.,0.,1.55)); +#393833 = DIRECTION('',(0.,0.,1.)); +#393834 = DIRECTION('',(1.,0.,-0.)); +#393835 = ADVANCED_FACE('',(#393836),#393847,.F.); +#393836 = FACE_BOUND('',#393837,.T.); +#393837 = EDGE_LOOP('',(#393838,#393839,#393845,#393846)); +#393838 = ORIENTED_EDGE('',*,*,#393802,.T.); +#393839 = ORIENTED_EDGE('',*,*,#393840,.T.); +#393840 = EDGE_CURVE('',#393803,#393823,#393841,.T.); +#393841 = LINE('',#393842,#393843); +#393842 = CARTESIAN_POINT('',(134.25,-106.1,-4.6E-02)); +#393843 = VECTOR('',#393844,1.); +#393844 = DIRECTION('',(0.,0.,1.)); +#393845 = ORIENTED_EDGE('',*,*,#393822,.F.); +#393846 = ORIENTED_EDGE('',*,*,#393840,.F.); +#393847 = CYLINDRICAL_SURFACE('',#393848,0.6); +#393848 = AXIS2_PLACEMENT_3D('',#393849,#393850,#393851); +#393849 = CARTESIAN_POINT('',(134.25,-105.5,-4.6E-02)); +#393850 = DIRECTION('',(-0.,-0.,-1.)); +#393851 = DIRECTION('',(-0.,-1.,0.)); +#393852 = MANIFOLD_SOLID_BREP('',#393853); +#393853 = CLOSED_SHELL('',(#393854,#393887,#393907,#393927)); +#393854 = ADVANCED_FACE('',(#393855),#393882,.T.); +#393855 = FACE_BOUND('',#393856,.T.); +#393856 = EDGE_LOOP('',(#393857,#393867,#393874,#393875)); +#393857 = ORIENTED_EDGE('',*,*,#393858,.T.); +#393858 = EDGE_CURVE('',#393859,#393861,#393863,.T.); +#393859 = VERTEX_POINT('',#393860); +#393860 = CARTESIAN_POINT('',(135.374999,-105.5,0.)); +#393861 = VERTEX_POINT('',#393862); +#393862 = CARTESIAN_POINT('',(135.374999,-105.5,-4.E-02)); +#393863 = LINE('',#393864,#393865); +#393864 = CARTESIAN_POINT('',(135.374999,-105.5,0.)); +#393865 = VECTOR('',#393866,1.); +#393866 = DIRECTION('',(0.,0.,-1.)); +#393867 = ORIENTED_EDGE('',*,*,#393868,.T.); +#393868 = EDGE_CURVE('',#393861,#393861,#393869,.T.); +#393869 = CIRCLE('',#393870,1.124999); +#393870 = AXIS2_PLACEMENT_3D('',#393871,#393872,#393873); +#393871 = CARTESIAN_POINT('',(134.25,-105.5,-4.E-02)); +#393872 = DIRECTION('',(0.,0.,1.)); +#393873 = DIRECTION('',(1.,0.,-0.)); +#393874 = ORIENTED_EDGE('',*,*,#393858,.F.); +#393875 = ORIENTED_EDGE('',*,*,#393876,.F.); +#393876 = EDGE_CURVE('',#393859,#393859,#393877,.T.); +#393877 = CIRCLE('',#393878,1.124999); +#393878 = AXIS2_PLACEMENT_3D('',#393879,#393880,#393881); +#393879 = CARTESIAN_POINT('',(134.25,-105.5,0.)); +#393880 = DIRECTION('',(0.,0.,1.)); +#393881 = DIRECTION('',(1.,0.,-0.)); +#393882 = CYLINDRICAL_SURFACE('',#393883,1.124999); +#393883 = AXIS2_PLACEMENT_3D('',#393884,#393885,#393886); +#393884 = CARTESIAN_POINT('',(134.25,-105.5,0.)); +#393885 = DIRECTION('',(0.,0.,1.)); +#393886 = DIRECTION('',(1.,0.,-0.)); +#393887 = ADVANCED_FACE('',(#393888,#393891),#393902,.F.); +#393888 = FACE_BOUND('',#393889,.F.); +#393889 = EDGE_LOOP('',(#393890)); +#393890 = ORIENTED_EDGE('',*,*,#393876,.F.); +#393891 = FACE_BOUND('',#393892,.F.); +#393892 = EDGE_LOOP('',(#393893)); +#393893 = ORIENTED_EDGE('',*,*,#393894,.F.); +#393894 = EDGE_CURVE('',#393895,#393895,#393897,.T.); +#393895 = VERTEX_POINT('',#393896); +#393896 = CARTESIAN_POINT('',(134.25,-106.1,0.)); +#393897 = CIRCLE('',#393898,0.6); +#393898 = AXIS2_PLACEMENT_3D('',#393899,#393900,#393901); +#393899 = CARTESIAN_POINT('',(134.25,-105.5,0.)); +#393900 = DIRECTION('',(-0.,0.,-1.)); +#393901 = DIRECTION('',(-0.,-1.,0.)); +#393902 = PLANE('',#393903); +#393903 = AXIS2_PLACEMENT_3D('',#393904,#393905,#393906); +#393904 = CARTESIAN_POINT('',(0.,0.,0.)); +#393905 = DIRECTION('',(-0.,-0.,-1.)); +#393906 = DIRECTION('',(-1.,0.,0.)); +#393907 = ADVANCED_FACE('',(#393908,#393911),#393922,.T.); +#393908 = FACE_BOUND('',#393909,.T.); +#393909 = EDGE_LOOP('',(#393910)); +#393910 = ORIENTED_EDGE('',*,*,#393868,.F.); +#393911 = FACE_BOUND('',#393912,.T.); +#393912 = EDGE_LOOP('',(#393913)); +#393913 = ORIENTED_EDGE('',*,*,#393914,.F.); +#393914 = EDGE_CURVE('',#393915,#393915,#393917,.T.); +#393915 = VERTEX_POINT('',#393916); +#393916 = CARTESIAN_POINT('',(134.25,-106.1,-4.E-02)); +#393917 = CIRCLE('',#393918,0.6); +#393918 = AXIS2_PLACEMENT_3D('',#393919,#393920,#393921); +#393919 = CARTESIAN_POINT('',(134.25,-105.5,-4.E-02)); +#393920 = DIRECTION('',(-0.,0.,-1.)); +#393921 = DIRECTION('',(-0.,-1.,0.)); +#393922 = PLANE('',#393923); +#393923 = AXIS2_PLACEMENT_3D('',#393924,#393925,#393926); +#393924 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#393925 = DIRECTION('',(-0.,-0.,-1.)); +#393926 = DIRECTION('',(-1.,0.,0.)); +#393927 = ADVANCED_FACE('',(#393928),#393939,.F.); +#393928 = FACE_BOUND('',#393929,.T.); +#393929 = EDGE_LOOP('',(#393930,#393931,#393937,#393938)); +#393930 = ORIENTED_EDGE('',*,*,#393914,.T.); +#393931 = ORIENTED_EDGE('',*,*,#393932,.T.); +#393932 = EDGE_CURVE('',#393915,#393895,#393933,.T.); +#393933 = LINE('',#393934,#393935); +#393934 = CARTESIAN_POINT('',(134.25,-106.1,-4.6E-02)); +#393935 = VECTOR('',#393936,1.); +#393936 = DIRECTION('',(0.,0.,1.)); +#393937 = ORIENTED_EDGE('',*,*,#393894,.F.); +#393938 = ORIENTED_EDGE('',*,*,#393932,.F.); +#393939 = CYLINDRICAL_SURFACE('',#393940,0.6); +#393940 = AXIS2_PLACEMENT_3D('',#393941,#393942,#393943); +#393941 = CARTESIAN_POINT('',(134.25,-105.5,-4.6E-02)); +#393942 = DIRECTION('',(-0.,-0.,-1.)); +#393943 = DIRECTION('',(-0.,-1.,0.)); +#393944 = MANIFOLD_SOLID_BREP('',#393945); +#393945 = CLOSED_SHELL('',(#393946,#393979,#393999,#394019)); +#393946 = ADVANCED_FACE('',(#393947),#393974,.T.); +#393947 = FACE_BOUND('',#393948,.F.); +#393948 = EDGE_LOOP('',(#393949,#393959,#393966,#393967)); +#393949 = ORIENTED_EDGE('',*,*,#393950,.T.); +#393950 = EDGE_CURVE('',#393951,#393953,#393955,.T.); +#393951 = VERTEX_POINT('',#393952); +#393952 = CARTESIAN_POINT('',(134.25,-106.125,-4.E-02)); +#393953 = VERTEX_POINT('',#393954); +#393954 = CARTESIAN_POINT('',(134.25,-106.125,1.55)); +#393955 = LINE('',#393956,#393957); +#393956 = CARTESIAN_POINT('',(134.25,-106.125,-4.E-02)); +#393957 = VECTOR('',#393958,1.); +#393958 = DIRECTION('',(0.,0.,1.)); +#393959 = ORIENTED_EDGE('',*,*,#393960,.T.); +#393960 = EDGE_CURVE('',#393953,#393953,#393961,.T.); +#393961 = CIRCLE('',#393962,0.625); +#393962 = AXIS2_PLACEMENT_3D('',#393963,#393964,#393965); +#393963 = CARTESIAN_POINT('',(134.25,-105.5,1.55)); +#393964 = DIRECTION('',(0.,0.,1.)); +#393965 = DIRECTION('',(-0.,-1.,0.)); +#393966 = ORIENTED_EDGE('',*,*,#393950,.F.); +#393967 = ORIENTED_EDGE('',*,*,#393968,.F.); +#393968 = EDGE_CURVE('',#393951,#393951,#393969,.T.); +#393969 = CIRCLE('',#393970,0.625); +#393970 = AXIS2_PLACEMENT_3D('',#393971,#393972,#393973); +#393971 = CARTESIAN_POINT('',(134.25,-105.5,-4.E-02)); +#393972 = DIRECTION('',(0.,0.,1.)); +#393973 = DIRECTION('',(-0.,-1.,0.)); +#393974 = CYLINDRICAL_SURFACE('',#393975,0.625); +#393975 = AXIS2_PLACEMENT_3D('',#393976,#393977,#393978); +#393976 = CARTESIAN_POINT('',(134.25,-105.5,-4.E-02)); +#393977 = DIRECTION('',(-0.,-0.,-1.)); +#393978 = DIRECTION('',(-0.,-1.,0.)); +#393979 = ADVANCED_FACE('',(#393980,#393983),#393994,.F.); +#393980 = FACE_BOUND('',#393981,.F.); +#393981 = EDGE_LOOP('',(#393982)); +#393982 = ORIENTED_EDGE('',*,*,#393968,.T.); +#393983 = FACE_BOUND('',#393984,.F.); +#393984 = EDGE_LOOP('',(#393985)); +#393985 = ORIENTED_EDGE('',*,*,#393986,.T.); +#393986 = EDGE_CURVE('',#393987,#393987,#393989,.T.); +#393987 = VERTEX_POINT('',#393988); +#393988 = CARTESIAN_POINT('',(134.25,-106.1,-4.E-02)); +#393989 = CIRCLE('',#393990,0.6); +#393990 = AXIS2_PLACEMENT_3D('',#393991,#393992,#393993); +#393991 = CARTESIAN_POINT('',(134.25,-105.5,-4.E-02)); +#393992 = DIRECTION('',(-0.,0.,-1.)); +#393993 = DIRECTION('',(-0.,-1.,0.)); +#393994 = PLANE('',#393995); +#393995 = AXIS2_PLACEMENT_3D('',#393996,#393997,#393998); +#393996 = CARTESIAN_POINT('',(134.25,-106.125,-4.E-02)); +#393997 = DIRECTION('',(0.,0.,1.)); +#393998 = DIRECTION('',(1.,0.,-0.)); +#393999 = ADVANCED_FACE('',(#394000,#394003),#394014,.T.); +#394000 = FACE_BOUND('',#394001,.T.); +#394001 = EDGE_LOOP('',(#394002)); +#394002 = ORIENTED_EDGE('',*,*,#393960,.T.); +#394003 = FACE_BOUND('',#394004,.T.); +#394004 = EDGE_LOOP('',(#394005)); +#394005 = ORIENTED_EDGE('',*,*,#394006,.T.); +#394006 = EDGE_CURVE('',#394007,#394007,#394009,.T.); +#394007 = VERTEX_POINT('',#394008); +#394008 = CARTESIAN_POINT('',(134.25,-106.1,1.55)); +#394009 = CIRCLE('',#394010,0.6); +#394010 = AXIS2_PLACEMENT_3D('',#394011,#394012,#394013); +#394011 = CARTESIAN_POINT('',(134.25,-105.5,1.55)); +#394012 = DIRECTION('',(-0.,0.,-1.)); +#394013 = DIRECTION('',(-0.,-1.,0.)); +#394014 = PLANE('',#394015); +#394015 = AXIS2_PLACEMENT_3D('',#394016,#394017,#394018); +#394016 = CARTESIAN_POINT('',(134.25,-106.125,1.55)); +#394017 = DIRECTION('',(0.,0.,1.)); +#394018 = DIRECTION('',(1.,0.,-0.)); +#394019 = ADVANCED_FACE('',(#394020),#394031,.F.); +#394020 = FACE_BOUND('',#394021,.T.); +#394021 = EDGE_LOOP('',(#394022,#394023,#394029,#394030)); +#394022 = ORIENTED_EDGE('',*,*,#393986,.T.); +#394023 = ORIENTED_EDGE('',*,*,#394024,.T.); +#394024 = EDGE_CURVE('',#393987,#394007,#394025,.T.); +#394025 = LINE('',#394026,#394027); +#394026 = CARTESIAN_POINT('',(134.25,-106.1,-4.6E-02)); +#394027 = VECTOR('',#394028,1.); +#394028 = DIRECTION('',(0.,0.,1.)); +#394029 = ORIENTED_EDGE('',*,*,#394006,.F.); +#394030 = ORIENTED_EDGE('',*,*,#394024,.F.); +#394031 = CYLINDRICAL_SURFACE('',#394032,0.6); +#394032 = AXIS2_PLACEMENT_3D('',#394033,#394034,#394035); +#394033 = CARTESIAN_POINT('',(134.25,-105.5,-4.6E-02)); +#394034 = DIRECTION('',(-0.,-0.,-1.)); +#394035 = DIRECTION('',(-0.,-1.,0.)); +#394036 = MANIFOLD_SOLID_BREP('',#394037); +#394037 = CLOSED_SHELL('',(#394038,#394080,#394111,#394144,#394175, + #394208,#394239,#394272,#394294,#394310)); +#394038 = ADVANCED_FACE('',(#394039),#394075,.T.); +#394039 = FACE_BOUND('',#394040,.T.); +#394040 = EDGE_LOOP('',(#394041,#394051,#394060,#394068)); +#394041 = ORIENTED_EDGE('',*,*,#394042,.T.); +#394042 = EDGE_CURVE('',#394043,#394045,#394047,.T.); +#394043 = VERTEX_POINT('',#394044); +#394044 = CARTESIAN_POINT('',(126.19,-153.38,1.51)); +#394045 = VERTEX_POINT('',#394046); +#394046 = CARTESIAN_POINT('',(126.19,-153.38,1.55)); +#394047 = LINE('',#394048,#394049); +#394048 = CARTESIAN_POINT('',(126.19,-153.38,1.51)); +#394049 = VECTOR('',#394050,1.); +#394050 = DIRECTION('',(0.,0.,1.)); +#394051 = ORIENTED_EDGE('',*,*,#394052,.T.); +#394052 = EDGE_CURVE('',#394045,#394053,#394055,.T.); +#394053 = VERTEX_POINT('',#394054); +#394054 = CARTESIAN_POINT('',(126.33,-153.24,1.55)); +#394055 = CIRCLE('',#394056,0.139999827125); +#394056 = AXIS2_PLACEMENT_3D('',#394057,#394058,#394059); +#394057 = CARTESIAN_POINT('',(126.32999982712,-153.3799998271,1.55)); +#394058 = DIRECTION('',(0.,0.,-1.)); +#394059 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#394060 = ORIENTED_EDGE('',*,*,#394061,.F.); +#394061 = EDGE_CURVE('',#394062,#394053,#394064,.T.); +#394062 = VERTEX_POINT('',#394063); +#394063 = CARTESIAN_POINT('',(126.33,-153.24,1.51)); +#394064 = LINE('',#394065,#394066); +#394065 = CARTESIAN_POINT('',(126.33,-153.24,1.51)); +#394066 = VECTOR('',#394067,1.); +#394067 = DIRECTION('',(0.,0.,1.)); +#394068 = ORIENTED_EDGE('',*,*,#394069,.F.); +#394069 = EDGE_CURVE('',#394043,#394062,#394070,.T.); +#394070 = CIRCLE('',#394071,0.139999827125); +#394071 = AXIS2_PLACEMENT_3D('',#394072,#394073,#394074); +#394072 = CARTESIAN_POINT('',(126.32999982712,-153.3799998271,1.51)); +#394073 = DIRECTION('',(0.,0.,-1.)); +#394074 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#394075 = CYLINDRICAL_SURFACE('',#394076,0.139999827125); +#394076 = AXIS2_PLACEMENT_3D('',#394077,#394078,#394079); +#394077 = CARTESIAN_POINT('',(126.32999982712,-153.3799998271,1.51)); +#394078 = DIRECTION('',(0.,0.,-1.)); +#394079 = DIRECTION('',(-0.999999999999,-1.234820451254E-06,-0.)); +#394080 = ADVANCED_FACE('',(#394081),#394106,.T.); +#394081 = FACE_BOUND('',#394082,.T.); +#394082 = EDGE_LOOP('',(#394083,#394084,#394092,#394100)); +#394083 = ORIENTED_EDGE('',*,*,#394061,.T.); +#394084 = ORIENTED_EDGE('',*,*,#394085,.T.); +#394085 = EDGE_CURVE('',#394053,#394086,#394088,.T.); +#394086 = VERTEX_POINT('',#394087); +#394087 = CARTESIAN_POINT('',(126.67,-153.24,1.55)); +#394088 = LINE('',#394089,#394090); +#394089 = CARTESIAN_POINT('',(126.33,-153.24,1.55)); +#394090 = VECTOR('',#394091,1.); +#394091 = DIRECTION('',(1.,0.,0.)); +#394092 = ORIENTED_EDGE('',*,*,#394093,.F.); +#394093 = EDGE_CURVE('',#394094,#394086,#394096,.T.); +#394094 = VERTEX_POINT('',#394095); +#394095 = CARTESIAN_POINT('',(126.67,-153.24,1.51)); +#394096 = LINE('',#394097,#394098); +#394097 = CARTESIAN_POINT('',(126.67,-153.24,1.51)); +#394098 = VECTOR('',#394099,1.); +#394099 = DIRECTION('',(0.,0.,1.)); +#394100 = ORIENTED_EDGE('',*,*,#394101,.F.); +#394101 = EDGE_CURVE('',#394062,#394094,#394102,.T.); +#394102 = LINE('',#394103,#394104); +#394103 = CARTESIAN_POINT('',(126.33,-153.24,1.51)); +#394104 = VECTOR('',#394105,1.); +#394105 = DIRECTION('',(1.,0.,0.)); +#394106 = PLANE('',#394107); +#394107 = AXIS2_PLACEMENT_3D('',#394108,#394109,#394110); +#394108 = CARTESIAN_POINT('',(126.33,-153.24,1.51)); +#394109 = DIRECTION('',(0.,1.,0.)); +#394110 = DIRECTION('',(1.,0.,0.)); +#394111 = ADVANCED_FACE('',(#394112),#394139,.T.); +#394112 = FACE_BOUND('',#394113,.T.); +#394113 = EDGE_LOOP('',(#394114,#394115,#394124,#394132)); +#394114 = ORIENTED_EDGE('',*,*,#394093,.T.); +#394115 = ORIENTED_EDGE('',*,*,#394116,.T.); +#394116 = EDGE_CURVE('',#394086,#394117,#394119,.T.); +#394117 = VERTEX_POINT('',#394118); +#394118 = CARTESIAN_POINT('',(126.81,-153.38,1.55)); +#394119 = CIRCLE('',#394120,0.139999827125); +#394120 = AXIS2_PLACEMENT_3D('',#394121,#394122,#394123); +#394121 = CARTESIAN_POINT('',(126.67000017287,-153.3799998271,1.55)); +#394122 = DIRECTION('',(0.,0.,-1.)); +#394123 = DIRECTION('',(-1.23482055276E-06,0.999999999999,0.)); +#394124 = ORIENTED_EDGE('',*,*,#394125,.F.); +#394125 = EDGE_CURVE('',#394126,#394117,#394128,.T.); +#394126 = VERTEX_POINT('',#394127); +#394127 = CARTESIAN_POINT('',(126.81,-153.38,1.51)); +#394128 = LINE('',#394129,#394130); +#394129 = CARTESIAN_POINT('',(126.81,-153.38,1.51)); +#394130 = VECTOR('',#394131,1.); +#394131 = DIRECTION('',(0.,0.,1.)); +#394132 = ORIENTED_EDGE('',*,*,#394133,.F.); +#394133 = EDGE_CURVE('',#394094,#394126,#394134,.T.); +#394134 = CIRCLE('',#394135,0.139999827125); +#394135 = AXIS2_PLACEMENT_3D('',#394136,#394137,#394138); +#394136 = CARTESIAN_POINT('',(126.67000017287,-153.3799998271,1.51)); +#394137 = DIRECTION('',(0.,0.,-1.)); +#394138 = DIRECTION('',(-1.23482055276E-06,0.999999999999,0.)); +#394139 = CYLINDRICAL_SURFACE('',#394140,0.139999827125); +#394140 = AXIS2_PLACEMENT_3D('',#394141,#394142,#394143); +#394141 = CARTESIAN_POINT('',(126.67000017287,-153.3799998271,1.51)); +#394142 = DIRECTION('',(0.,0.,-1.)); +#394143 = DIRECTION('',(-1.23482055276E-06,0.999999999999,0.)); +#394144 = ADVANCED_FACE('',(#394145),#394170,.T.); +#394145 = FACE_BOUND('',#394146,.T.); +#394146 = EDGE_LOOP('',(#394147,#394148,#394156,#394164)); +#394147 = ORIENTED_EDGE('',*,*,#394125,.T.); +#394148 = ORIENTED_EDGE('',*,*,#394149,.T.); +#394149 = EDGE_CURVE('',#394117,#394150,#394152,.T.); +#394150 = VERTEX_POINT('',#394151); +#394151 = CARTESIAN_POINT('',(126.81,-153.66,1.55)); +#394152 = LINE('',#394153,#394154); +#394153 = CARTESIAN_POINT('',(126.81,-153.38,1.55)); +#394154 = VECTOR('',#394155,1.); +#394155 = DIRECTION('',(0.,-1.,0.)); +#394156 = ORIENTED_EDGE('',*,*,#394157,.F.); +#394157 = EDGE_CURVE('',#394158,#394150,#394160,.T.); +#394158 = VERTEX_POINT('',#394159); +#394159 = CARTESIAN_POINT('',(126.81,-153.66,1.51)); +#394160 = LINE('',#394161,#394162); +#394161 = CARTESIAN_POINT('',(126.81,-153.66,1.51)); +#394162 = VECTOR('',#394163,1.); +#394163 = DIRECTION('',(0.,0.,1.)); +#394164 = ORIENTED_EDGE('',*,*,#394165,.F.); +#394165 = EDGE_CURVE('',#394126,#394158,#394166,.T.); +#394166 = LINE('',#394167,#394168); +#394167 = CARTESIAN_POINT('',(126.81,-153.38,1.51)); +#394168 = VECTOR('',#394169,1.); +#394169 = DIRECTION('',(0.,-1.,0.)); +#394170 = PLANE('',#394171); +#394171 = AXIS2_PLACEMENT_3D('',#394172,#394173,#394174); +#394172 = CARTESIAN_POINT('',(126.81,-153.38,1.51)); +#394173 = DIRECTION('',(1.,0.,-0.)); +#394174 = DIRECTION('',(0.,-1.,0.)); +#394175 = ADVANCED_FACE('',(#394176),#394203,.T.); +#394176 = FACE_BOUND('',#394177,.T.); +#394177 = EDGE_LOOP('',(#394178,#394179,#394188,#394196)); +#394178 = ORIENTED_EDGE('',*,*,#394157,.T.); +#394179 = ORIENTED_EDGE('',*,*,#394180,.T.); +#394180 = EDGE_CURVE('',#394150,#394181,#394183,.T.); +#394181 = VERTEX_POINT('',#394182); +#394182 = CARTESIAN_POINT('',(126.67,-153.8,1.55)); +#394183 = CIRCLE('',#394184,0.139999827125); +#394184 = AXIS2_PLACEMENT_3D('',#394185,#394186,#394187); +#394185 = CARTESIAN_POINT('',(126.67000017287,-153.6600001728,1.55)); +#394186 = DIRECTION('',(0.,0.,-1.)); +#394187 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#394188 = ORIENTED_EDGE('',*,*,#394189,.F.); +#394189 = EDGE_CURVE('',#394190,#394181,#394192,.T.); +#394190 = VERTEX_POINT('',#394191); +#394191 = CARTESIAN_POINT('',(126.67,-153.8,1.51)); +#394192 = LINE('',#394193,#394194); +#394193 = CARTESIAN_POINT('',(126.67,-153.8,1.51)); +#394194 = VECTOR('',#394195,1.); +#394195 = DIRECTION('',(0.,0.,1.)); +#394196 = ORIENTED_EDGE('',*,*,#394197,.F.); +#394197 = EDGE_CURVE('',#394158,#394190,#394198,.T.); +#394198 = CIRCLE('',#394199,0.139999827125); +#394199 = AXIS2_PLACEMENT_3D('',#394200,#394201,#394202); +#394200 = CARTESIAN_POINT('',(126.67000017287,-153.6600001728,1.51)); +#394201 = DIRECTION('',(0.,0.,-1.)); +#394202 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#394203 = CYLINDRICAL_SURFACE('',#394204,0.139999827125); +#394204 = AXIS2_PLACEMENT_3D('',#394205,#394206,#394207); +#394205 = CARTESIAN_POINT('',(126.67000017287,-153.6600001728,1.51)); +#394206 = DIRECTION('',(0.,0.,-1.)); +#394207 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#394208 = ADVANCED_FACE('',(#394209),#394234,.T.); +#394209 = FACE_BOUND('',#394210,.T.); +#394210 = EDGE_LOOP('',(#394211,#394212,#394220,#394228)); +#394211 = ORIENTED_EDGE('',*,*,#394189,.T.); +#394212 = ORIENTED_EDGE('',*,*,#394213,.T.); +#394213 = EDGE_CURVE('',#394181,#394214,#394216,.T.); +#394214 = VERTEX_POINT('',#394215); +#394215 = CARTESIAN_POINT('',(126.33,-153.8,1.55)); +#394216 = LINE('',#394217,#394218); +#394217 = CARTESIAN_POINT('',(126.67,-153.8,1.55)); +#394218 = VECTOR('',#394219,1.); +#394219 = DIRECTION('',(-1.,0.,0.)); +#394220 = ORIENTED_EDGE('',*,*,#394221,.F.); +#394221 = EDGE_CURVE('',#394222,#394214,#394224,.T.); +#394222 = VERTEX_POINT('',#394223); +#394223 = CARTESIAN_POINT('',(126.33,-153.8,1.51)); +#394224 = LINE('',#394225,#394226); +#394225 = CARTESIAN_POINT('',(126.33,-153.8,1.51)); +#394226 = VECTOR('',#394227,1.); +#394227 = DIRECTION('',(0.,0.,1.)); +#394228 = ORIENTED_EDGE('',*,*,#394229,.F.); +#394229 = EDGE_CURVE('',#394190,#394222,#394230,.T.); +#394230 = LINE('',#394231,#394232); +#394231 = CARTESIAN_POINT('',(126.67,-153.8,1.51)); +#394232 = VECTOR('',#394233,1.); +#394233 = DIRECTION('',(-1.,0.,0.)); +#394234 = PLANE('',#394235); +#394235 = AXIS2_PLACEMENT_3D('',#394236,#394237,#394238); +#394236 = CARTESIAN_POINT('',(126.67,-153.8,1.51)); +#394237 = DIRECTION('',(0.,-1.,0.)); +#394238 = DIRECTION('',(-1.,0.,0.)); +#394239 = ADVANCED_FACE('',(#394240),#394267,.T.); +#394240 = FACE_BOUND('',#394241,.T.); +#394241 = EDGE_LOOP('',(#394242,#394243,#394252,#394260)); +#394242 = ORIENTED_EDGE('',*,*,#394221,.T.); +#394243 = ORIENTED_EDGE('',*,*,#394244,.T.); +#394244 = EDGE_CURVE('',#394214,#394245,#394247,.T.); +#394245 = VERTEX_POINT('',#394246); +#394246 = CARTESIAN_POINT('',(126.19,-153.66,1.55)); +#394247 = CIRCLE('',#394248,0.139999827125); +#394248 = AXIS2_PLACEMENT_3D('',#394249,#394250,#394251); +#394249 = CARTESIAN_POINT('',(126.32999982712,-153.6600001728,1.55)); +#394250 = DIRECTION('',(0.,0.,-1.)); +#394251 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#394252 = ORIENTED_EDGE('',*,*,#394253,.F.); +#394253 = EDGE_CURVE('',#394254,#394245,#394256,.T.); +#394254 = VERTEX_POINT('',#394255); +#394255 = CARTESIAN_POINT('',(126.19,-153.66,1.51)); +#394256 = LINE('',#394257,#394258); +#394257 = CARTESIAN_POINT('',(126.19,-153.66,1.51)); +#394258 = VECTOR('',#394259,1.); +#394259 = DIRECTION('',(0.,0.,1.)); +#394260 = ORIENTED_EDGE('',*,*,#394261,.F.); +#394261 = EDGE_CURVE('',#394222,#394254,#394262,.T.); +#394262 = CIRCLE('',#394263,0.139999827125); +#394263 = AXIS2_PLACEMENT_3D('',#394264,#394265,#394266); +#394264 = CARTESIAN_POINT('',(126.32999982712,-153.6600001728,1.51)); +#394265 = DIRECTION('',(0.,0.,-1.)); +#394266 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#394267 = CYLINDRICAL_SURFACE('',#394268,0.139999827125); +#394268 = AXIS2_PLACEMENT_3D('',#394269,#394270,#394271); +#394269 = CARTESIAN_POINT('',(126.32999982712,-153.6600001728,1.51)); +#394270 = DIRECTION('',(0.,0.,-1.)); +#394271 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#394272 = ADVANCED_FACE('',(#394273),#394289,.T.); +#394273 = FACE_BOUND('',#394274,.T.); +#394274 = EDGE_LOOP('',(#394275,#394276,#394282,#394283)); +#394275 = ORIENTED_EDGE('',*,*,#394253,.T.); +#394276 = ORIENTED_EDGE('',*,*,#394277,.T.); +#394277 = EDGE_CURVE('',#394245,#394045,#394278,.T.); +#394278 = LINE('',#394279,#394280); +#394279 = CARTESIAN_POINT('',(126.19,-153.66,1.55)); +#394280 = VECTOR('',#394281,1.); +#394281 = DIRECTION('',(0.,1.,0.)); +#394282 = ORIENTED_EDGE('',*,*,#394042,.F.); +#394283 = ORIENTED_EDGE('',*,*,#394284,.F.); +#394284 = EDGE_CURVE('',#394254,#394043,#394285,.T.); +#394285 = LINE('',#394286,#394287); +#394286 = CARTESIAN_POINT('',(126.19,-153.66,1.51)); +#394287 = VECTOR('',#394288,1.); +#394288 = DIRECTION('',(0.,1.,0.)); +#394289 = PLANE('',#394290); +#394290 = AXIS2_PLACEMENT_3D('',#394291,#394292,#394293); +#394291 = CARTESIAN_POINT('',(126.19,-153.66,1.51)); +#394292 = DIRECTION('',(-1.,0.,0.)); +#394293 = DIRECTION('',(0.,1.,0.)); +#394294 = ADVANCED_FACE('',(#394295),#394305,.F.); +#394295 = FACE_BOUND('',#394296,.T.); +#394296 = EDGE_LOOP('',(#394297,#394298,#394299,#394300,#394301,#394302, + #394303,#394304)); +#394297 = ORIENTED_EDGE('',*,*,#394069,.T.); +#394298 = ORIENTED_EDGE('',*,*,#394101,.T.); +#394299 = ORIENTED_EDGE('',*,*,#394133,.T.); +#394300 = ORIENTED_EDGE('',*,*,#394165,.T.); +#394301 = ORIENTED_EDGE('',*,*,#394197,.T.); +#394302 = ORIENTED_EDGE('',*,*,#394229,.T.); +#394303 = ORIENTED_EDGE('',*,*,#394261,.T.); +#394304 = ORIENTED_EDGE('',*,*,#394284,.T.); +#394305 = PLANE('',#394306); +#394306 = AXIS2_PLACEMENT_3D('',#394307,#394308,#394309); +#394307 = CARTESIAN_POINT('',(0.,0.,1.51)); +#394308 = DIRECTION('',(0.,0.,1.)); +#394309 = DIRECTION('',(1.,0.,-0.)); +#394310 = ADVANCED_FACE('',(#394311),#394321,.T.); +#394311 = FACE_BOUND('',#394312,.F.); +#394312 = EDGE_LOOP('',(#394313,#394314,#394315,#394316,#394317,#394318, + #394319,#394320)); +#394313 = ORIENTED_EDGE('',*,*,#394052,.T.); +#394314 = ORIENTED_EDGE('',*,*,#394085,.T.); +#394315 = ORIENTED_EDGE('',*,*,#394116,.T.); +#394316 = ORIENTED_EDGE('',*,*,#394149,.T.); +#394317 = ORIENTED_EDGE('',*,*,#394180,.T.); +#394318 = ORIENTED_EDGE('',*,*,#394213,.T.); +#394319 = ORIENTED_EDGE('',*,*,#394244,.T.); +#394320 = ORIENTED_EDGE('',*,*,#394277,.T.); +#394321 = PLANE('',#394322); +#394322 = AXIS2_PLACEMENT_3D('',#394323,#394324,#394325); +#394323 = CARTESIAN_POINT('',(0.,0.,1.55)); +#394324 = DIRECTION('',(0.,0.,1.)); +#394325 = DIRECTION('',(1.,0.,-0.)); +#394326 = MANIFOLD_SOLID_BREP('',#394327); +#394327 = CLOSED_SHELL('',(#394328,#394370,#394401,#394434,#394465, + #394498,#394529,#394562,#394584,#394600)); +#394328 = ADVANCED_FACE('',(#394329),#394365,.T.); +#394329 = FACE_BOUND('',#394330,.T.); +#394330 = EDGE_LOOP('',(#394331,#394341,#394350,#394358)); +#394331 = ORIENTED_EDGE('',*,*,#394332,.T.); +#394332 = EDGE_CURVE('',#394333,#394335,#394337,.T.); +#394333 = VERTEX_POINT('',#394334); +#394334 = CARTESIAN_POINT('',(129.93,-154.135,1.51)); +#394335 = VERTEX_POINT('',#394336); +#394336 = CARTESIAN_POINT('',(129.93,-154.135,1.55)); +#394337 = LINE('',#394338,#394339); +#394338 = CARTESIAN_POINT('',(129.93,-154.135,1.51)); +#394339 = VECTOR('',#394340,1.); +#394340 = DIRECTION('',(0.,0.,1.)); +#394341 = ORIENTED_EDGE('',*,*,#394342,.T.); +#394342 = EDGE_CURVE('',#394335,#394343,#394345,.T.); +#394343 = VERTEX_POINT('',#394344); +#394344 = CARTESIAN_POINT('',(130.065,-154.,1.55)); +#394345 = CIRCLE('',#394346,0.135001418495); +#394346 = AXIS2_PLACEMENT_3D('',#394347,#394348,#394349); +#394347 = CARTESIAN_POINT('',(130.06500141848,-154.1350014184,1.55)); +#394348 = DIRECTION('',(0.,0.,-1.)); +#394349 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#394350 = ORIENTED_EDGE('',*,*,#394351,.F.); +#394351 = EDGE_CURVE('',#394352,#394343,#394354,.T.); +#394352 = VERTEX_POINT('',#394353); +#394353 = CARTESIAN_POINT('',(130.065,-154.,1.51)); +#394354 = LINE('',#394355,#394356); +#394355 = CARTESIAN_POINT('',(130.065,-154.,1.51)); +#394356 = VECTOR('',#394357,1.); +#394357 = DIRECTION('',(0.,0.,1.)); +#394358 = ORIENTED_EDGE('',*,*,#394359,.F.); +#394359 = EDGE_CURVE('',#394333,#394352,#394360,.T.); +#394360 = CIRCLE('',#394361,0.135001418495); +#394361 = AXIS2_PLACEMENT_3D('',#394362,#394363,#394364); +#394362 = CARTESIAN_POINT('',(130.06500141848,-154.1350014184,1.51)); +#394363 = DIRECTION('',(0.,0.,-1.)); +#394364 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#394365 = CYLINDRICAL_SURFACE('',#394366,0.135001418495); +#394366 = AXIS2_PLACEMENT_3D('',#394367,#394368,#394369); +#394367 = CARTESIAN_POINT('',(130.06500141848,-154.1350014184,1.51)); +#394368 = DIRECTION('',(0.,0.,-1.)); +#394369 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#394370 = ADVANCED_FACE('',(#394371),#394396,.T.); +#394371 = FACE_BOUND('',#394372,.T.); +#394372 = EDGE_LOOP('',(#394373,#394374,#394382,#394390)); +#394373 = ORIENTED_EDGE('',*,*,#394351,.T.); +#394374 = ORIENTED_EDGE('',*,*,#394375,.T.); +#394375 = EDGE_CURVE('',#394343,#394376,#394378,.T.); +#394376 = VERTEX_POINT('',#394377); +#394377 = CARTESIAN_POINT('',(130.435,-154.,1.55)); +#394378 = LINE('',#394379,#394380); +#394379 = CARTESIAN_POINT('',(130.065,-154.,1.55)); +#394380 = VECTOR('',#394381,1.); +#394381 = DIRECTION('',(1.,0.,0.)); +#394382 = ORIENTED_EDGE('',*,*,#394383,.F.); +#394383 = EDGE_CURVE('',#394384,#394376,#394386,.T.); +#394384 = VERTEX_POINT('',#394385); +#394385 = CARTESIAN_POINT('',(130.435,-154.,1.51)); +#394386 = LINE('',#394387,#394388); +#394387 = CARTESIAN_POINT('',(130.435,-154.,1.51)); +#394388 = VECTOR('',#394389,1.); +#394389 = DIRECTION('',(0.,0.,1.)); +#394390 = ORIENTED_EDGE('',*,*,#394391,.F.); +#394391 = EDGE_CURVE('',#394352,#394384,#394392,.T.); +#394392 = LINE('',#394393,#394394); +#394393 = CARTESIAN_POINT('',(130.065,-154.,1.51)); +#394394 = VECTOR('',#394395,1.); +#394395 = DIRECTION('',(1.,0.,0.)); +#394396 = PLANE('',#394397); +#394397 = AXIS2_PLACEMENT_3D('',#394398,#394399,#394400); +#394398 = CARTESIAN_POINT('',(130.065,-154.,1.51)); +#394399 = DIRECTION('',(0.,1.,0.)); +#394400 = DIRECTION('',(1.,0.,0.)); +#394401 = ADVANCED_FACE('',(#394402),#394429,.T.); +#394402 = FACE_BOUND('',#394403,.T.); +#394403 = EDGE_LOOP('',(#394404,#394405,#394414,#394422)); +#394404 = ORIENTED_EDGE('',*,*,#394383,.T.); +#394405 = ORIENTED_EDGE('',*,*,#394406,.T.); +#394406 = EDGE_CURVE('',#394376,#394407,#394409,.T.); +#394407 = VERTEX_POINT('',#394408); +#394408 = CARTESIAN_POINT('',(130.57,-154.135,1.55)); +#394409 = CIRCLE('',#394410,0.135001418495); +#394410 = AXIS2_PLACEMENT_3D('',#394411,#394412,#394413); +#394411 = CARTESIAN_POINT('',(130.43499858151,-154.1350014184,1.55)); +#394412 = DIRECTION('',(0.,0.,-1.)); +#394413 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#394414 = ORIENTED_EDGE('',*,*,#394415,.F.); +#394415 = EDGE_CURVE('',#394416,#394407,#394418,.T.); +#394416 = VERTEX_POINT('',#394417); +#394417 = CARTESIAN_POINT('',(130.57,-154.135,1.51)); +#394418 = LINE('',#394419,#394420); +#394419 = CARTESIAN_POINT('',(130.57,-154.135,1.51)); +#394420 = VECTOR('',#394421,1.); +#394421 = DIRECTION('',(0.,0.,1.)); +#394422 = ORIENTED_EDGE('',*,*,#394423,.F.); +#394423 = EDGE_CURVE('',#394384,#394416,#394424,.T.); +#394424 = CIRCLE('',#394425,0.135001418495); +#394425 = AXIS2_PLACEMENT_3D('',#394426,#394427,#394428); +#394426 = CARTESIAN_POINT('',(130.43499858151,-154.1350014184,1.51)); +#394427 = DIRECTION('',(0.,0.,-1.)); +#394428 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#394429 = CYLINDRICAL_SURFACE('',#394430,0.135001418495); +#394430 = AXIS2_PLACEMENT_3D('',#394431,#394432,#394433); +#394431 = CARTESIAN_POINT('',(130.43499858151,-154.1350014184,1.51)); +#394432 = DIRECTION('',(0.,0.,-1.)); +#394433 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#394434 = ADVANCED_FACE('',(#394435),#394460,.T.); +#394435 = FACE_BOUND('',#394436,.T.); +#394436 = EDGE_LOOP('',(#394437,#394438,#394446,#394454)); +#394437 = ORIENTED_EDGE('',*,*,#394415,.T.); +#394438 = ORIENTED_EDGE('',*,*,#394439,.T.); +#394439 = EDGE_CURVE('',#394407,#394440,#394442,.T.); +#394440 = VERTEX_POINT('',#394441); +#394441 = CARTESIAN_POINT('',(130.57,-154.405,1.55)); +#394442 = LINE('',#394443,#394444); +#394443 = CARTESIAN_POINT('',(130.57,-154.135,1.55)); +#394444 = VECTOR('',#394445,1.); +#394445 = DIRECTION('',(0.,-1.,0.)); +#394446 = ORIENTED_EDGE('',*,*,#394447,.F.); +#394447 = EDGE_CURVE('',#394448,#394440,#394450,.T.); +#394448 = VERTEX_POINT('',#394449); +#394449 = CARTESIAN_POINT('',(130.57,-154.405,1.51)); +#394450 = LINE('',#394451,#394452); +#394451 = CARTESIAN_POINT('',(130.57,-154.405,1.51)); +#394452 = VECTOR('',#394453,1.); +#394453 = DIRECTION('',(0.,0.,1.)); +#394454 = ORIENTED_EDGE('',*,*,#394455,.F.); +#394455 = EDGE_CURVE('',#394416,#394448,#394456,.T.); +#394456 = LINE('',#394457,#394458); +#394457 = CARTESIAN_POINT('',(130.57,-154.135,1.51)); +#394458 = VECTOR('',#394459,1.); +#394459 = DIRECTION('',(0.,-1.,0.)); +#394460 = PLANE('',#394461); +#394461 = AXIS2_PLACEMENT_3D('',#394462,#394463,#394464); +#394462 = CARTESIAN_POINT('',(130.57,-154.135,1.51)); +#394463 = DIRECTION('',(1.,0.,-0.)); +#394464 = DIRECTION('',(0.,-1.,0.)); +#394465 = ADVANCED_FACE('',(#394466),#394493,.T.); +#394466 = FACE_BOUND('',#394467,.T.); +#394467 = EDGE_LOOP('',(#394468,#394469,#394478,#394486)); +#394468 = ORIENTED_EDGE('',*,*,#394447,.T.); +#394469 = ORIENTED_EDGE('',*,*,#394470,.T.); +#394470 = EDGE_CURVE('',#394440,#394471,#394473,.T.); +#394471 = VERTEX_POINT('',#394472); +#394472 = CARTESIAN_POINT('',(130.435,-154.54,1.55)); +#394473 = CIRCLE('',#394474,0.135001418495); +#394474 = AXIS2_PLACEMENT_3D('',#394475,#394476,#394477); +#394475 = CARTESIAN_POINT('',(130.43499858151,-154.4049985815,1.55)); +#394476 = DIRECTION('',(0.,0.,-1.)); +#394477 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#394478 = ORIENTED_EDGE('',*,*,#394479,.F.); +#394479 = EDGE_CURVE('',#394480,#394471,#394482,.T.); +#394480 = VERTEX_POINT('',#394481); +#394481 = CARTESIAN_POINT('',(130.435,-154.54,1.51)); +#394482 = LINE('',#394483,#394484); +#394483 = CARTESIAN_POINT('',(130.435,-154.54,1.51)); +#394484 = VECTOR('',#394485,1.); +#394485 = DIRECTION('',(0.,0.,1.)); +#394486 = ORIENTED_EDGE('',*,*,#394487,.F.); +#394487 = EDGE_CURVE('',#394448,#394480,#394488,.T.); +#394488 = CIRCLE('',#394489,0.135001418495); +#394489 = AXIS2_PLACEMENT_3D('',#394490,#394491,#394492); +#394490 = CARTESIAN_POINT('',(130.43499858151,-154.4049985815,1.51)); +#394491 = DIRECTION('',(0.,0.,-1.)); +#394492 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#394493 = CYLINDRICAL_SURFACE('',#394494,0.135001418495); +#394494 = AXIS2_PLACEMENT_3D('',#394495,#394496,#394497); +#394495 = CARTESIAN_POINT('',(130.43499858151,-154.4049985815,1.51)); +#394496 = DIRECTION('',(0.,0.,-1.)); +#394497 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#394498 = ADVANCED_FACE('',(#394499),#394524,.T.); +#394499 = FACE_BOUND('',#394500,.T.); +#394500 = EDGE_LOOP('',(#394501,#394502,#394510,#394518)); +#394501 = ORIENTED_EDGE('',*,*,#394479,.T.); +#394502 = ORIENTED_EDGE('',*,*,#394503,.T.); +#394503 = EDGE_CURVE('',#394471,#394504,#394506,.T.); +#394504 = VERTEX_POINT('',#394505); +#394505 = CARTESIAN_POINT('',(130.065,-154.54,1.55)); +#394506 = LINE('',#394507,#394508); +#394507 = CARTESIAN_POINT('',(130.435,-154.54,1.55)); +#394508 = VECTOR('',#394509,1.); +#394509 = DIRECTION('',(-1.,0.,0.)); +#394510 = ORIENTED_EDGE('',*,*,#394511,.F.); +#394511 = EDGE_CURVE('',#394512,#394504,#394514,.T.); +#394512 = VERTEX_POINT('',#394513); +#394513 = CARTESIAN_POINT('',(130.065,-154.54,1.51)); +#394514 = LINE('',#394515,#394516); +#394515 = CARTESIAN_POINT('',(130.065,-154.54,1.51)); +#394516 = VECTOR('',#394517,1.); +#394517 = DIRECTION('',(0.,0.,1.)); +#394518 = ORIENTED_EDGE('',*,*,#394519,.F.); +#394519 = EDGE_CURVE('',#394480,#394512,#394520,.T.); +#394520 = LINE('',#394521,#394522); +#394521 = CARTESIAN_POINT('',(130.435,-154.54,1.51)); +#394522 = VECTOR('',#394523,1.); +#394523 = DIRECTION('',(-1.,0.,0.)); +#394524 = PLANE('',#394525); +#394525 = AXIS2_PLACEMENT_3D('',#394526,#394527,#394528); +#394526 = CARTESIAN_POINT('',(130.435,-154.54,1.51)); +#394527 = DIRECTION('',(0.,-1.,0.)); +#394528 = DIRECTION('',(-1.,0.,0.)); +#394529 = ADVANCED_FACE('',(#394530),#394557,.T.); +#394530 = FACE_BOUND('',#394531,.T.); +#394531 = EDGE_LOOP('',(#394532,#394533,#394542,#394550)); +#394532 = ORIENTED_EDGE('',*,*,#394511,.T.); +#394533 = ORIENTED_EDGE('',*,*,#394534,.T.); +#394534 = EDGE_CURVE('',#394504,#394535,#394537,.T.); +#394535 = VERTEX_POINT('',#394536); +#394536 = CARTESIAN_POINT('',(129.93,-154.405,1.55)); +#394537 = CIRCLE('',#394538,0.135001418495); +#394538 = AXIS2_PLACEMENT_3D('',#394539,#394540,#394541); +#394539 = CARTESIAN_POINT('',(130.06500141848,-154.4049985815,1.55)); +#394540 = DIRECTION('',(0.,0.,-1.)); +#394541 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#394542 = ORIENTED_EDGE('',*,*,#394543,.F.); +#394543 = EDGE_CURVE('',#394544,#394535,#394546,.T.); +#394544 = VERTEX_POINT('',#394545); +#394545 = CARTESIAN_POINT('',(129.93,-154.405,1.51)); +#394546 = LINE('',#394547,#394548); +#394547 = CARTESIAN_POINT('',(129.93,-154.405,1.51)); +#394548 = VECTOR('',#394549,1.); +#394549 = DIRECTION('',(0.,0.,1.)); +#394550 = ORIENTED_EDGE('',*,*,#394551,.F.); +#394551 = EDGE_CURVE('',#394512,#394544,#394552,.T.); +#394552 = CIRCLE('',#394553,0.135001418495); +#394553 = AXIS2_PLACEMENT_3D('',#394554,#394555,#394556); +#394554 = CARTESIAN_POINT('',(130.06500141848,-154.4049985815,1.51)); +#394555 = DIRECTION('',(0.,0.,-1.)); +#394556 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#394557 = CYLINDRICAL_SURFACE('',#394558,0.135001418495); +#394558 = AXIS2_PLACEMENT_3D('',#394559,#394560,#394561); +#394559 = CARTESIAN_POINT('',(130.06500141848,-154.4049985815,1.51)); +#394560 = DIRECTION('',(0.,0.,-1.)); +#394561 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#394562 = ADVANCED_FACE('',(#394563),#394579,.T.); +#394563 = FACE_BOUND('',#394564,.T.); +#394564 = EDGE_LOOP('',(#394565,#394566,#394572,#394573)); +#394565 = ORIENTED_EDGE('',*,*,#394543,.T.); +#394566 = ORIENTED_EDGE('',*,*,#394567,.T.); +#394567 = EDGE_CURVE('',#394535,#394335,#394568,.T.); +#394568 = LINE('',#394569,#394570); +#394569 = CARTESIAN_POINT('',(129.93,-154.405,1.55)); +#394570 = VECTOR('',#394571,1.); +#394571 = DIRECTION('',(0.,1.,0.)); +#394572 = ORIENTED_EDGE('',*,*,#394332,.F.); +#394573 = ORIENTED_EDGE('',*,*,#394574,.F.); +#394574 = EDGE_CURVE('',#394544,#394333,#394575,.T.); +#394575 = LINE('',#394576,#394577); +#394576 = CARTESIAN_POINT('',(129.93,-154.405,1.51)); +#394577 = VECTOR('',#394578,1.); +#394578 = DIRECTION('',(0.,1.,0.)); +#394579 = PLANE('',#394580); +#394580 = AXIS2_PLACEMENT_3D('',#394581,#394582,#394583); +#394581 = CARTESIAN_POINT('',(129.93,-154.405,1.51)); +#394582 = DIRECTION('',(-1.,0.,0.)); +#394583 = DIRECTION('',(0.,1.,0.)); +#394584 = ADVANCED_FACE('',(#394585),#394595,.F.); +#394585 = FACE_BOUND('',#394586,.T.); +#394586 = EDGE_LOOP('',(#394587,#394588,#394589,#394590,#394591,#394592, + #394593,#394594)); +#394587 = ORIENTED_EDGE('',*,*,#394359,.T.); +#394588 = ORIENTED_EDGE('',*,*,#394391,.T.); +#394589 = ORIENTED_EDGE('',*,*,#394423,.T.); +#394590 = ORIENTED_EDGE('',*,*,#394455,.T.); +#394591 = ORIENTED_EDGE('',*,*,#394487,.T.); +#394592 = ORIENTED_EDGE('',*,*,#394519,.T.); +#394593 = ORIENTED_EDGE('',*,*,#394551,.T.); +#394594 = ORIENTED_EDGE('',*,*,#394574,.T.); +#394595 = PLANE('',#394596); +#394596 = AXIS2_PLACEMENT_3D('',#394597,#394598,#394599); +#394597 = CARTESIAN_POINT('',(0.,0.,1.51)); +#394598 = DIRECTION('',(0.,0.,1.)); +#394599 = DIRECTION('',(1.,0.,-0.)); +#394600 = ADVANCED_FACE('',(#394601),#394611,.T.); +#394601 = FACE_BOUND('',#394602,.F.); +#394602 = EDGE_LOOP('',(#394603,#394604,#394605,#394606,#394607,#394608, + #394609,#394610)); +#394603 = ORIENTED_EDGE('',*,*,#394342,.T.); +#394604 = ORIENTED_EDGE('',*,*,#394375,.T.); +#394605 = ORIENTED_EDGE('',*,*,#394406,.T.); +#394606 = ORIENTED_EDGE('',*,*,#394439,.T.); +#394607 = ORIENTED_EDGE('',*,*,#394470,.T.); +#394608 = ORIENTED_EDGE('',*,*,#394503,.T.); +#394609 = ORIENTED_EDGE('',*,*,#394534,.T.); +#394610 = ORIENTED_EDGE('',*,*,#394567,.T.); +#394611 = PLANE('',#394612); +#394612 = AXIS2_PLACEMENT_3D('',#394613,#394614,#394615); +#394613 = CARTESIAN_POINT('',(0.,0.,1.55)); +#394614 = DIRECTION('',(0.,0.,1.)); +#394615 = DIRECTION('',(1.,0.,-0.)); +#394616 = MANIFOLD_SOLID_BREP('',#394617); +#394617 = CLOSED_SHELL('',(#394618,#394660,#394691,#394724,#394755, + #394788,#394819,#394852,#394874,#394890)); +#394618 = ADVANCED_FACE('',(#394619),#394655,.T.); +#394619 = FACE_BOUND('',#394620,.T.); +#394620 = EDGE_LOOP('',(#394621,#394631,#394640,#394648)); +#394621 = ORIENTED_EDGE('',*,*,#394622,.T.); +#394622 = EDGE_CURVE('',#394623,#394625,#394627,.T.); +#394623 = VERTEX_POINT('',#394624); +#394624 = CARTESIAN_POINT('',(127.19,-64.26,1.51)); +#394625 = VERTEX_POINT('',#394626); +#394626 = CARTESIAN_POINT('',(127.19,-64.26,1.55)); +#394627 = LINE('',#394628,#394629); +#394628 = CARTESIAN_POINT('',(127.19,-64.26,1.51)); +#394629 = VECTOR('',#394630,1.); +#394630 = DIRECTION('',(0.,0.,1.)); +#394631 = ORIENTED_EDGE('',*,*,#394632,.T.); +#394632 = EDGE_CURVE('',#394625,#394633,#394635,.T.); +#394633 = VERTEX_POINT('',#394634); +#394634 = CARTESIAN_POINT('',(127.33,-64.12,1.55)); +#394635 = CIRCLE('',#394636,0.139999827125); +#394636 = AXIS2_PLACEMENT_3D('',#394637,#394638,#394639); +#394637 = CARTESIAN_POINT('',(127.32999982712,-64.25999982712,1.55)); +#394638 = DIRECTION('',(0.,0.,-1.)); +#394639 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#394640 = ORIENTED_EDGE('',*,*,#394641,.F.); +#394641 = EDGE_CURVE('',#394642,#394633,#394644,.T.); +#394642 = VERTEX_POINT('',#394643); +#394643 = CARTESIAN_POINT('',(127.33,-64.12,1.51)); +#394644 = LINE('',#394645,#394646); +#394645 = CARTESIAN_POINT('',(127.33,-64.12,1.51)); +#394646 = VECTOR('',#394647,1.); +#394647 = DIRECTION('',(0.,0.,1.)); +#394648 = ORIENTED_EDGE('',*,*,#394649,.F.); +#394649 = EDGE_CURVE('',#394623,#394642,#394650,.T.); +#394650 = CIRCLE('',#394651,0.139999827125); +#394651 = AXIS2_PLACEMENT_3D('',#394652,#394653,#394654); +#394652 = CARTESIAN_POINT('',(127.32999982712,-64.25999982712,1.51)); +#394653 = DIRECTION('',(0.,0.,-1.)); +#394654 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#394655 = CYLINDRICAL_SURFACE('',#394656,0.139999827125); +#394656 = AXIS2_PLACEMENT_3D('',#394657,#394658,#394659); +#394657 = CARTESIAN_POINT('',(127.32999982712,-64.25999982712,1.51)); +#394658 = DIRECTION('',(0.,0.,-1.)); +#394659 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#394660 = ADVANCED_FACE('',(#394661),#394686,.T.); +#394661 = FACE_BOUND('',#394662,.T.); +#394662 = EDGE_LOOP('',(#394663,#394664,#394672,#394680)); +#394663 = ORIENTED_EDGE('',*,*,#394641,.T.); +#394664 = ORIENTED_EDGE('',*,*,#394665,.T.); +#394665 = EDGE_CURVE('',#394633,#394666,#394668,.T.); +#394666 = VERTEX_POINT('',#394667); +#394667 = CARTESIAN_POINT('',(127.67,-64.12,1.55)); +#394668 = LINE('',#394669,#394670); +#394669 = CARTESIAN_POINT('',(127.33,-64.12,1.55)); +#394670 = VECTOR('',#394671,1.); +#394671 = DIRECTION('',(1.,0.,0.)); +#394672 = ORIENTED_EDGE('',*,*,#394673,.F.); +#394673 = EDGE_CURVE('',#394674,#394666,#394676,.T.); +#394674 = VERTEX_POINT('',#394675); +#394675 = CARTESIAN_POINT('',(127.67,-64.12,1.51)); +#394676 = LINE('',#394677,#394678); +#394677 = CARTESIAN_POINT('',(127.67,-64.12,1.51)); +#394678 = VECTOR('',#394679,1.); +#394679 = DIRECTION('',(0.,0.,1.)); +#394680 = ORIENTED_EDGE('',*,*,#394681,.F.); +#394681 = EDGE_CURVE('',#394642,#394674,#394682,.T.); +#394682 = LINE('',#394683,#394684); +#394683 = CARTESIAN_POINT('',(127.33,-64.12,1.51)); +#394684 = VECTOR('',#394685,1.); +#394685 = DIRECTION('',(1.,0.,0.)); +#394686 = PLANE('',#394687); +#394687 = AXIS2_PLACEMENT_3D('',#394688,#394689,#394690); +#394688 = CARTESIAN_POINT('',(127.33,-64.12,1.51)); +#394689 = DIRECTION('',(0.,1.,0.)); +#394690 = DIRECTION('',(1.,0.,0.)); +#394691 = ADVANCED_FACE('',(#394692),#394719,.T.); +#394692 = FACE_BOUND('',#394693,.T.); +#394693 = EDGE_LOOP('',(#394694,#394695,#394704,#394712)); +#394694 = ORIENTED_EDGE('',*,*,#394673,.T.); +#394695 = ORIENTED_EDGE('',*,*,#394696,.T.); +#394696 = EDGE_CURVE('',#394666,#394697,#394699,.T.); +#394697 = VERTEX_POINT('',#394698); +#394698 = CARTESIAN_POINT('',(127.81,-64.26,1.55)); +#394699 = CIRCLE('',#394700,0.139999827125); +#394700 = AXIS2_PLACEMENT_3D('',#394701,#394702,#394703); +#394701 = CARTESIAN_POINT('',(127.67000017287,-64.25999982712,1.55)); +#394702 = DIRECTION('',(0.,0.,-1.)); +#394703 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#394704 = ORIENTED_EDGE('',*,*,#394705,.F.); +#394705 = EDGE_CURVE('',#394706,#394697,#394708,.T.); +#394706 = VERTEX_POINT('',#394707); +#394707 = CARTESIAN_POINT('',(127.81,-64.26,1.51)); +#394708 = LINE('',#394709,#394710); +#394709 = CARTESIAN_POINT('',(127.81,-64.26,1.51)); +#394710 = VECTOR('',#394711,1.); +#394711 = DIRECTION('',(0.,0.,1.)); +#394712 = ORIENTED_EDGE('',*,*,#394713,.F.); +#394713 = EDGE_CURVE('',#394674,#394706,#394714,.T.); +#394714 = CIRCLE('',#394715,0.139999827125); +#394715 = AXIS2_PLACEMENT_3D('',#394716,#394717,#394718); +#394716 = CARTESIAN_POINT('',(127.67000017287,-64.25999982712,1.51)); +#394717 = DIRECTION('',(0.,0.,-1.)); +#394718 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#394719 = CYLINDRICAL_SURFACE('',#394720,0.139999827125); +#394720 = AXIS2_PLACEMENT_3D('',#394721,#394722,#394723); +#394721 = CARTESIAN_POINT('',(127.67000017287,-64.25999982712,1.51)); +#394722 = DIRECTION('',(0.,0.,-1.)); +#394723 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#394724 = ADVANCED_FACE('',(#394725),#394750,.T.); +#394725 = FACE_BOUND('',#394726,.T.); +#394726 = EDGE_LOOP('',(#394727,#394728,#394736,#394744)); +#394727 = ORIENTED_EDGE('',*,*,#394705,.T.); +#394728 = ORIENTED_EDGE('',*,*,#394729,.T.); +#394729 = EDGE_CURVE('',#394697,#394730,#394732,.T.); +#394730 = VERTEX_POINT('',#394731); +#394731 = CARTESIAN_POINT('',(127.81,-64.54,1.55)); +#394732 = LINE('',#394733,#394734); +#394733 = CARTESIAN_POINT('',(127.81,-64.26,1.55)); +#394734 = VECTOR('',#394735,1.); +#394735 = DIRECTION('',(0.,-1.,0.)); +#394736 = ORIENTED_EDGE('',*,*,#394737,.F.); +#394737 = EDGE_CURVE('',#394738,#394730,#394740,.T.); +#394738 = VERTEX_POINT('',#394739); +#394739 = CARTESIAN_POINT('',(127.81,-64.54,1.51)); +#394740 = LINE('',#394741,#394742); +#394741 = CARTESIAN_POINT('',(127.81,-64.54,1.51)); +#394742 = VECTOR('',#394743,1.); +#394743 = DIRECTION('',(0.,0.,1.)); +#394744 = ORIENTED_EDGE('',*,*,#394745,.F.); +#394745 = EDGE_CURVE('',#394706,#394738,#394746,.T.); +#394746 = LINE('',#394747,#394748); +#394747 = CARTESIAN_POINT('',(127.81,-64.26,1.51)); +#394748 = VECTOR('',#394749,1.); +#394749 = DIRECTION('',(0.,-1.,0.)); +#394750 = PLANE('',#394751); +#394751 = AXIS2_PLACEMENT_3D('',#394752,#394753,#394754); +#394752 = CARTESIAN_POINT('',(127.81,-64.26,1.51)); +#394753 = DIRECTION('',(1.,0.,-0.)); +#394754 = DIRECTION('',(0.,-1.,0.)); +#394755 = ADVANCED_FACE('',(#394756),#394783,.T.); +#394756 = FACE_BOUND('',#394757,.T.); +#394757 = EDGE_LOOP('',(#394758,#394759,#394768,#394776)); +#394758 = ORIENTED_EDGE('',*,*,#394737,.T.); +#394759 = ORIENTED_EDGE('',*,*,#394760,.T.); +#394760 = EDGE_CURVE('',#394730,#394761,#394763,.T.); +#394761 = VERTEX_POINT('',#394762); +#394762 = CARTESIAN_POINT('',(127.67,-64.68,1.55)); +#394763 = CIRCLE('',#394764,0.139999827126); +#394764 = AXIS2_PLACEMENT_3D('',#394765,#394766,#394767); +#394765 = CARTESIAN_POINT('',(127.67000017287,-64.54000017287,1.55)); +#394766 = DIRECTION('',(0.,0.,-1.)); +#394767 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#394768 = ORIENTED_EDGE('',*,*,#394769,.F.); +#394769 = EDGE_CURVE('',#394770,#394761,#394772,.T.); +#394770 = VERTEX_POINT('',#394771); +#394771 = CARTESIAN_POINT('',(127.67,-64.68,1.51)); +#394772 = LINE('',#394773,#394774); +#394773 = CARTESIAN_POINT('',(127.67,-64.68,1.51)); +#394774 = VECTOR('',#394775,1.); +#394775 = DIRECTION('',(0.,0.,1.)); +#394776 = ORIENTED_EDGE('',*,*,#394777,.F.); +#394777 = EDGE_CURVE('',#394738,#394770,#394778,.T.); +#394778 = CIRCLE('',#394779,0.139999827126); +#394779 = AXIS2_PLACEMENT_3D('',#394780,#394781,#394782); +#394780 = CARTESIAN_POINT('',(127.67000017287,-64.54000017287,1.51)); +#394781 = DIRECTION('',(0.,0.,-1.)); +#394782 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#394783 = CYLINDRICAL_SURFACE('',#394784,0.139999827126); +#394784 = AXIS2_PLACEMENT_3D('',#394785,#394786,#394787); +#394785 = CARTESIAN_POINT('',(127.67000017287,-64.54000017287,1.51)); +#394786 = DIRECTION('',(0.,0.,-1.)); +#394787 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#394788 = ADVANCED_FACE('',(#394789),#394814,.T.); +#394789 = FACE_BOUND('',#394790,.T.); +#394790 = EDGE_LOOP('',(#394791,#394792,#394800,#394808)); +#394791 = ORIENTED_EDGE('',*,*,#394769,.T.); +#394792 = ORIENTED_EDGE('',*,*,#394793,.T.); +#394793 = EDGE_CURVE('',#394761,#394794,#394796,.T.); +#394794 = VERTEX_POINT('',#394795); +#394795 = CARTESIAN_POINT('',(127.33,-64.68,1.55)); +#394796 = LINE('',#394797,#394798); +#394797 = CARTESIAN_POINT('',(127.67,-64.68,1.55)); +#394798 = VECTOR('',#394799,1.); +#394799 = DIRECTION('',(-1.,0.,0.)); +#394800 = ORIENTED_EDGE('',*,*,#394801,.F.); +#394801 = EDGE_CURVE('',#394802,#394794,#394804,.T.); +#394802 = VERTEX_POINT('',#394803); +#394803 = CARTESIAN_POINT('',(127.33,-64.68,1.51)); +#394804 = LINE('',#394805,#394806); +#394805 = CARTESIAN_POINT('',(127.33,-64.68,1.51)); +#394806 = VECTOR('',#394807,1.); +#394807 = DIRECTION('',(0.,0.,1.)); +#394808 = ORIENTED_EDGE('',*,*,#394809,.F.); +#394809 = EDGE_CURVE('',#394770,#394802,#394810,.T.); +#394810 = LINE('',#394811,#394812); +#394811 = CARTESIAN_POINT('',(127.67,-64.68,1.51)); +#394812 = VECTOR('',#394813,1.); +#394813 = DIRECTION('',(-1.,0.,0.)); +#394814 = PLANE('',#394815); +#394815 = AXIS2_PLACEMENT_3D('',#394816,#394817,#394818); +#394816 = CARTESIAN_POINT('',(127.67,-64.68,1.51)); +#394817 = DIRECTION('',(0.,-1.,0.)); +#394818 = DIRECTION('',(-1.,0.,0.)); +#394819 = ADVANCED_FACE('',(#394820),#394847,.T.); +#394820 = FACE_BOUND('',#394821,.T.); +#394821 = EDGE_LOOP('',(#394822,#394823,#394832,#394840)); +#394822 = ORIENTED_EDGE('',*,*,#394801,.T.); +#394823 = ORIENTED_EDGE('',*,*,#394824,.T.); +#394824 = EDGE_CURVE('',#394794,#394825,#394827,.T.); +#394825 = VERTEX_POINT('',#394826); +#394826 = CARTESIAN_POINT('',(127.19,-64.54,1.55)); +#394827 = CIRCLE('',#394828,0.139999827126); +#394828 = AXIS2_PLACEMENT_3D('',#394829,#394830,#394831); +#394829 = CARTESIAN_POINT('',(127.32999982712,-64.54000017287,1.55)); +#394830 = DIRECTION('',(0.,0.,-1.)); +#394831 = DIRECTION('',(1.234820146735E-06,-0.999999999999,0.)); +#394832 = ORIENTED_EDGE('',*,*,#394833,.F.); +#394833 = EDGE_CURVE('',#394834,#394825,#394836,.T.); +#394834 = VERTEX_POINT('',#394835); +#394835 = CARTESIAN_POINT('',(127.19,-64.54,1.51)); +#394836 = LINE('',#394837,#394838); +#394837 = CARTESIAN_POINT('',(127.19,-64.54,1.51)); +#394838 = VECTOR('',#394839,1.); +#394839 = DIRECTION('',(0.,0.,1.)); +#394840 = ORIENTED_EDGE('',*,*,#394841,.F.); +#394841 = EDGE_CURVE('',#394802,#394834,#394842,.T.); +#394842 = CIRCLE('',#394843,0.139999827126); +#394843 = AXIS2_PLACEMENT_3D('',#394844,#394845,#394846); +#394844 = CARTESIAN_POINT('',(127.32999982712,-64.54000017287,1.51)); +#394845 = DIRECTION('',(0.,0.,-1.)); +#394846 = DIRECTION('',(1.234820146735E-06,-0.999999999999,0.)); +#394847 = CYLINDRICAL_SURFACE('',#394848,0.139999827126); +#394848 = AXIS2_PLACEMENT_3D('',#394849,#394850,#394851); +#394849 = CARTESIAN_POINT('',(127.32999982712,-64.54000017287,1.51)); +#394850 = DIRECTION('',(0.,0.,-1.)); +#394851 = DIRECTION('',(1.234820146735E-06,-0.999999999999,0.)); +#394852 = ADVANCED_FACE('',(#394853),#394869,.T.); +#394853 = FACE_BOUND('',#394854,.T.); +#394854 = EDGE_LOOP('',(#394855,#394856,#394862,#394863)); +#394855 = ORIENTED_EDGE('',*,*,#394833,.T.); +#394856 = ORIENTED_EDGE('',*,*,#394857,.T.); +#394857 = EDGE_CURVE('',#394825,#394625,#394858,.T.); +#394858 = LINE('',#394859,#394860); +#394859 = CARTESIAN_POINT('',(127.19,-64.54,1.55)); +#394860 = VECTOR('',#394861,1.); +#394861 = DIRECTION('',(0.,1.,0.)); +#394862 = ORIENTED_EDGE('',*,*,#394622,.F.); +#394863 = ORIENTED_EDGE('',*,*,#394864,.F.); +#394864 = EDGE_CURVE('',#394834,#394623,#394865,.T.); +#394865 = LINE('',#394866,#394867); +#394866 = CARTESIAN_POINT('',(127.19,-64.54,1.51)); +#394867 = VECTOR('',#394868,1.); +#394868 = DIRECTION('',(0.,1.,0.)); +#394869 = PLANE('',#394870); +#394870 = AXIS2_PLACEMENT_3D('',#394871,#394872,#394873); +#394871 = CARTESIAN_POINT('',(127.19,-64.54,1.51)); +#394872 = DIRECTION('',(-1.,0.,0.)); +#394873 = DIRECTION('',(0.,1.,0.)); +#394874 = ADVANCED_FACE('',(#394875),#394885,.F.); +#394875 = FACE_BOUND('',#394876,.T.); +#394876 = EDGE_LOOP('',(#394877,#394878,#394879,#394880,#394881,#394882, + #394883,#394884)); +#394877 = ORIENTED_EDGE('',*,*,#394649,.T.); +#394878 = ORIENTED_EDGE('',*,*,#394681,.T.); +#394879 = ORIENTED_EDGE('',*,*,#394713,.T.); +#394880 = ORIENTED_EDGE('',*,*,#394745,.T.); +#394881 = ORIENTED_EDGE('',*,*,#394777,.T.); +#394882 = ORIENTED_EDGE('',*,*,#394809,.T.); +#394883 = ORIENTED_EDGE('',*,*,#394841,.T.); +#394884 = ORIENTED_EDGE('',*,*,#394864,.T.); +#394885 = PLANE('',#394886); +#394886 = AXIS2_PLACEMENT_3D('',#394887,#394888,#394889); +#394887 = CARTESIAN_POINT('',(0.,0.,1.51)); +#394888 = DIRECTION('',(0.,0.,1.)); +#394889 = DIRECTION('',(1.,0.,-0.)); +#394890 = ADVANCED_FACE('',(#394891),#394901,.T.); +#394891 = FACE_BOUND('',#394892,.F.); +#394892 = EDGE_LOOP('',(#394893,#394894,#394895,#394896,#394897,#394898, + #394899,#394900)); +#394893 = ORIENTED_EDGE('',*,*,#394632,.T.); +#394894 = ORIENTED_EDGE('',*,*,#394665,.T.); +#394895 = ORIENTED_EDGE('',*,*,#394696,.T.); +#394896 = ORIENTED_EDGE('',*,*,#394729,.T.); +#394897 = ORIENTED_EDGE('',*,*,#394760,.T.); +#394898 = ORIENTED_EDGE('',*,*,#394793,.T.); +#394899 = ORIENTED_EDGE('',*,*,#394824,.T.); +#394900 = ORIENTED_EDGE('',*,*,#394857,.T.); +#394901 = PLANE('',#394902); +#394902 = AXIS2_PLACEMENT_3D('',#394903,#394904,#394905); +#394903 = CARTESIAN_POINT('',(0.,0.,1.55)); +#394904 = DIRECTION('',(0.,0.,1.)); +#394905 = DIRECTION('',(1.,0.,-0.)); +#394906 = MANIFOLD_SOLID_BREP('',#394907); +#394907 = CLOSED_SHELL('',(#394908,#394950,#394981,#395014,#395045, + #395078,#395109,#395142,#395164,#395180)); +#394908 = ADVANCED_FACE('',(#394909),#394945,.T.); +#394909 = FACE_BOUND('',#394910,.T.); +#394910 = EDGE_LOOP('',(#394911,#394921,#394930,#394938)); +#394911 = ORIENTED_EDGE('',*,*,#394912,.T.); +#394912 = EDGE_CURVE('',#394913,#394915,#394917,.T.); +#394913 = VERTEX_POINT('',#394914); +#394914 = CARTESIAN_POINT('',(124.15,-64.45,1.51)); +#394915 = VERTEX_POINT('',#394916); +#394916 = CARTESIAN_POINT('',(124.15,-64.45,1.55)); +#394917 = LINE('',#394918,#394919); +#394918 = CARTESIAN_POINT('',(124.15,-64.45,1.51)); +#394919 = VECTOR('',#394920,1.); +#394920 = DIRECTION('',(0.,0.,1.)); +#394921 = ORIENTED_EDGE('',*,*,#394922,.T.); +#394922 = EDGE_CURVE('',#394915,#394923,#394925,.T.); +#394923 = VERTEX_POINT('',#394924); +#394924 = CARTESIAN_POINT('',(124.375,-64.225,1.55)); +#394925 = CIRCLE('',#394926,0.225000087974); +#394926 = AXIS2_PLACEMENT_3D('',#394927,#394928,#394929); +#394927 = CARTESIAN_POINT('',(124.37500008797,-64.45000008797,1.55)); +#394928 = DIRECTION('',(0.,0.,-1.)); +#394929 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#394930 = ORIENTED_EDGE('',*,*,#394931,.F.); +#394931 = EDGE_CURVE('',#394932,#394923,#394934,.T.); +#394932 = VERTEX_POINT('',#394933); +#394933 = CARTESIAN_POINT('',(124.375,-64.225,1.51)); +#394934 = LINE('',#394935,#394936); +#394935 = CARTESIAN_POINT('',(124.375,-64.225,1.51)); +#394936 = VECTOR('',#394937,1.); +#394937 = DIRECTION('',(0.,0.,1.)); +#394938 = ORIENTED_EDGE('',*,*,#394939,.F.); +#394939 = EDGE_CURVE('',#394913,#394932,#394940,.T.); +#394940 = CIRCLE('',#394941,0.225000087974); +#394941 = AXIS2_PLACEMENT_3D('',#394942,#394943,#394944); +#394942 = CARTESIAN_POINT('',(124.37500008797,-64.45000008797,1.51)); +#394943 = DIRECTION('',(0.,0.,-1.)); +#394944 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#394945 = CYLINDRICAL_SURFACE('',#394946,0.225000087974); +#394946 = AXIS2_PLACEMENT_3D('',#394947,#394948,#394949); +#394947 = CARTESIAN_POINT('',(124.37500008797,-64.45000008797,1.51)); +#394948 = DIRECTION('',(0.,0.,-1.)); +#394949 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#394950 = ADVANCED_FACE('',(#394951),#394976,.T.); +#394951 = FACE_BOUND('',#394952,.T.); +#394952 = EDGE_LOOP('',(#394953,#394954,#394962,#394970)); +#394953 = ORIENTED_EDGE('',*,*,#394931,.T.); +#394954 = ORIENTED_EDGE('',*,*,#394955,.T.); +#394955 = EDGE_CURVE('',#394923,#394956,#394958,.T.); +#394956 = VERTEX_POINT('',#394957); +#394957 = CARTESIAN_POINT('',(124.825,-64.225,1.55)); +#394958 = LINE('',#394959,#394960); +#394959 = CARTESIAN_POINT('',(124.375,-64.225,1.55)); +#394960 = VECTOR('',#394961,1.); +#394961 = DIRECTION('',(1.,0.,0.)); +#394962 = ORIENTED_EDGE('',*,*,#394963,.F.); +#394963 = EDGE_CURVE('',#394964,#394956,#394966,.T.); +#394964 = VERTEX_POINT('',#394965); +#394965 = CARTESIAN_POINT('',(124.825,-64.225,1.51)); +#394966 = LINE('',#394967,#394968); +#394967 = CARTESIAN_POINT('',(124.825,-64.225,1.51)); +#394968 = VECTOR('',#394969,1.); +#394969 = DIRECTION('',(0.,0.,1.)); +#394970 = ORIENTED_EDGE('',*,*,#394971,.F.); +#394971 = EDGE_CURVE('',#394932,#394964,#394972,.T.); +#394972 = LINE('',#394973,#394974); +#394973 = CARTESIAN_POINT('',(124.375,-64.225,1.51)); +#394974 = VECTOR('',#394975,1.); +#394975 = DIRECTION('',(1.,0.,0.)); +#394976 = PLANE('',#394977); +#394977 = AXIS2_PLACEMENT_3D('',#394978,#394979,#394980); +#394978 = CARTESIAN_POINT('',(124.375,-64.225,1.51)); +#394979 = DIRECTION('',(0.,1.,0.)); +#394980 = DIRECTION('',(1.,0.,0.)); +#394981 = ADVANCED_FACE('',(#394982),#395009,.T.); +#394982 = FACE_BOUND('',#394983,.T.); +#394983 = EDGE_LOOP('',(#394984,#394985,#394994,#395002)); +#394984 = ORIENTED_EDGE('',*,*,#394963,.T.); +#394985 = ORIENTED_EDGE('',*,*,#394986,.T.); +#394986 = EDGE_CURVE('',#394956,#394987,#394989,.T.); +#394987 = VERTEX_POINT('',#394988); +#394988 = CARTESIAN_POINT('',(125.05,-64.45,1.55)); +#394989 = CIRCLE('',#394990,0.225000087974); +#394990 = AXIS2_PLACEMENT_3D('',#394991,#394992,#394993); +#394991 = CARTESIAN_POINT('',(124.82499991202,-64.45000008797,1.55)); +#394992 = DIRECTION('',(0.,0.,-1.)); +#394993 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#394994 = ORIENTED_EDGE('',*,*,#394995,.F.); +#394995 = EDGE_CURVE('',#394996,#394987,#394998,.T.); +#394996 = VERTEX_POINT('',#394997); +#394997 = CARTESIAN_POINT('',(125.05,-64.45,1.51)); +#394998 = LINE('',#394999,#395000); +#394999 = CARTESIAN_POINT('',(125.05,-64.45,1.51)); +#395000 = VECTOR('',#395001,1.); +#395001 = DIRECTION('',(0.,0.,1.)); +#395002 = ORIENTED_EDGE('',*,*,#395003,.F.); +#395003 = EDGE_CURVE('',#394964,#394996,#395004,.T.); +#395004 = CIRCLE('',#395005,0.225000087974); +#395005 = AXIS2_PLACEMENT_3D('',#395006,#395007,#395008); +#395006 = CARTESIAN_POINT('',(124.82499991202,-64.45000008797,1.51)); +#395007 = DIRECTION('',(0.,0.,-1.)); +#395008 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#395009 = CYLINDRICAL_SURFACE('',#395010,0.225000087974); +#395010 = AXIS2_PLACEMENT_3D('',#395011,#395012,#395013); +#395011 = CARTESIAN_POINT('',(124.82499991202,-64.45000008797,1.51)); +#395012 = DIRECTION('',(0.,0.,-1.)); +#395013 = DIRECTION('',(3.909954721353E-07,1.,0.)); +#395014 = ADVANCED_FACE('',(#395015),#395040,.T.); +#395015 = FACE_BOUND('',#395016,.T.); +#395016 = EDGE_LOOP('',(#395017,#395018,#395026,#395034)); +#395017 = ORIENTED_EDGE('',*,*,#394995,.T.); +#395018 = ORIENTED_EDGE('',*,*,#395019,.T.); +#395019 = EDGE_CURVE('',#394987,#395020,#395022,.T.); +#395020 = VERTEX_POINT('',#395021); +#395021 = CARTESIAN_POINT('',(125.05,-64.95,1.55)); +#395022 = LINE('',#395023,#395024); +#395023 = CARTESIAN_POINT('',(125.05,-64.45,1.55)); +#395024 = VECTOR('',#395025,1.); +#395025 = DIRECTION('',(0.,-1.,0.)); +#395026 = ORIENTED_EDGE('',*,*,#395027,.F.); +#395027 = EDGE_CURVE('',#395028,#395020,#395030,.T.); +#395028 = VERTEX_POINT('',#395029); +#395029 = CARTESIAN_POINT('',(125.05,-64.95,1.51)); +#395030 = LINE('',#395031,#395032); +#395031 = CARTESIAN_POINT('',(125.05,-64.95,1.51)); +#395032 = VECTOR('',#395033,1.); +#395033 = DIRECTION('',(0.,0.,1.)); +#395034 = ORIENTED_EDGE('',*,*,#395035,.F.); +#395035 = EDGE_CURVE('',#394996,#395028,#395036,.T.); +#395036 = LINE('',#395037,#395038); +#395037 = CARTESIAN_POINT('',(125.05,-64.45,1.51)); +#395038 = VECTOR('',#395039,1.); +#395039 = DIRECTION('',(0.,-1.,0.)); +#395040 = PLANE('',#395041); +#395041 = AXIS2_PLACEMENT_3D('',#395042,#395043,#395044); +#395042 = CARTESIAN_POINT('',(125.05,-64.45,1.51)); +#395043 = DIRECTION('',(1.,0.,-0.)); +#395044 = DIRECTION('',(0.,-1.,0.)); +#395045 = ADVANCED_FACE('',(#395046),#395073,.T.); +#395046 = FACE_BOUND('',#395047,.T.); +#395047 = EDGE_LOOP('',(#395048,#395049,#395058,#395066)); +#395048 = ORIENTED_EDGE('',*,*,#395027,.T.); +#395049 = ORIENTED_EDGE('',*,*,#395050,.T.); +#395050 = EDGE_CURVE('',#395020,#395051,#395053,.T.); +#395051 = VERTEX_POINT('',#395052); +#395052 = CARTESIAN_POINT('',(124.825,-65.175,1.55)); +#395053 = CIRCLE('',#395054,0.225000087974); +#395054 = AXIS2_PLACEMENT_3D('',#395055,#395056,#395057); +#395055 = CARTESIAN_POINT('',(124.82499991202,-64.94999991202,1.55)); +#395056 = DIRECTION('',(0.,0.,-1.)); +#395057 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#395058 = ORIENTED_EDGE('',*,*,#395059,.F.); +#395059 = EDGE_CURVE('',#395060,#395051,#395062,.T.); +#395060 = VERTEX_POINT('',#395061); +#395061 = CARTESIAN_POINT('',(124.825,-65.175,1.51)); +#395062 = LINE('',#395063,#395064); +#395063 = CARTESIAN_POINT('',(124.825,-65.175,1.51)); +#395064 = VECTOR('',#395065,1.); +#395065 = DIRECTION('',(0.,0.,1.)); +#395066 = ORIENTED_EDGE('',*,*,#395067,.F.); +#395067 = EDGE_CURVE('',#395028,#395060,#395068,.T.); +#395068 = CIRCLE('',#395069,0.225000087974); +#395069 = AXIS2_PLACEMENT_3D('',#395070,#395071,#395072); +#395070 = CARTESIAN_POINT('',(124.82499991202,-64.94999991202,1.51)); +#395071 = DIRECTION('',(0.,0.,-1.)); +#395072 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#395073 = CYLINDRICAL_SURFACE('',#395074,0.225000087974); +#395074 = AXIS2_PLACEMENT_3D('',#395075,#395076,#395077); +#395075 = CARTESIAN_POINT('',(124.82499991202,-64.94999991202,1.51)); +#395076 = DIRECTION('',(0.,0.,-1.)); +#395077 = DIRECTION('',(1.,-3.909953458166E-07,0.)); +#395078 = ADVANCED_FACE('',(#395079),#395104,.T.); +#395079 = FACE_BOUND('',#395080,.T.); +#395080 = EDGE_LOOP('',(#395081,#395082,#395090,#395098)); +#395081 = ORIENTED_EDGE('',*,*,#395059,.T.); +#395082 = ORIENTED_EDGE('',*,*,#395083,.T.); +#395083 = EDGE_CURVE('',#395051,#395084,#395086,.T.); +#395084 = VERTEX_POINT('',#395085); +#395085 = CARTESIAN_POINT('',(124.375,-65.175,1.55)); +#395086 = LINE('',#395087,#395088); +#395087 = CARTESIAN_POINT('',(124.825,-65.175,1.55)); +#395088 = VECTOR('',#395089,1.); +#395089 = DIRECTION('',(-1.,0.,0.)); +#395090 = ORIENTED_EDGE('',*,*,#395091,.F.); +#395091 = EDGE_CURVE('',#395092,#395084,#395094,.T.); +#395092 = VERTEX_POINT('',#395093); +#395093 = CARTESIAN_POINT('',(124.375,-65.175,1.51)); +#395094 = LINE('',#395095,#395096); +#395095 = CARTESIAN_POINT('',(124.375,-65.175,1.51)); +#395096 = VECTOR('',#395097,1.); +#395097 = DIRECTION('',(0.,0.,1.)); +#395098 = ORIENTED_EDGE('',*,*,#395099,.F.); +#395099 = EDGE_CURVE('',#395060,#395092,#395100,.T.); +#395100 = LINE('',#395101,#395102); +#395101 = CARTESIAN_POINT('',(124.825,-65.175,1.51)); +#395102 = VECTOR('',#395103,1.); +#395103 = DIRECTION('',(-1.,0.,0.)); +#395104 = PLANE('',#395105); +#395105 = AXIS2_PLACEMENT_3D('',#395106,#395107,#395108); +#395106 = CARTESIAN_POINT('',(124.825,-65.175,1.51)); +#395107 = DIRECTION('',(0.,-1.,0.)); +#395108 = DIRECTION('',(-1.,0.,0.)); +#395109 = ADVANCED_FACE('',(#395110),#395137,.T.); +#395110 = FACE_BOUND('',#395111,.T.); +#395111 = EDGE_LOOP('',(#395112,#395113,#395122,#395130)); +#395112 = ORIENTED_EDGE('',*,*,#395091,.T.); +#395113 = ORIENTED_EDGE('',*,*,#395114,.T.); +#395114 = EDGE_CURVE('',#395084,#395115,#395117,.T.); +#395115 = VERTEX_POINT('',#395116); +#395116 = CARTESIAN_POINT('',(124.15,-64.95,1.55)); +#395117 = CIRCLE('',#395118,0.225000087974); +#395118 = AXIS2_PLACEMENT_3D('',#395119,#395120,#395121); +#395119 = CARTESIAN_POINT('',(124.37500008797,-64.94999991202,1.55)); +#395120 = DIRECTION('',(0.,0.,-1.)); +#395121 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#395122 = ORIENTED_EDGE('',*,*,#395123,.F.); +#395123 = EDGE_CURVE('',#395124,#395115,#395126,.T.); +#395124 = VERTEX_POINT('',#395125); +#395125 = CARTESIAN_POINT('',(124.15,-64.95,1.51)); +#395126 = LINE('',#395127,#395128); +#395127 = CARTESIAN_POINT('',(124.15,-64.95,1.51)); +#395128 = VECTOR('',#395129,1.); +#395129 = DIRECTION('',(0.,0.,1.)); +#395130 = ORIENTED_EDGE('',*,*,#395131,.F.); +#395131 = EDGE_CURVE('',#395092,#395124,#395132,.T.); +#395132 = CIRCLE('',#395133,0.225000087974); +#395133 = AXIS2_PLACEMENT_3D('',#395134,#395135,#395136); +#395134 = CARTESIAN_POINT('',(124.37500008797,-64.94999991202,1.51)); +#395135 = DIRECTION('',(0.,0.,-1.)); +#395136 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#395137 = CYLINDRICAL_SURFACE('',#395138,0.225000087974); +#395138 = AXIS2_PLACEMENT_3D('',#395139,#395140,#395141); +#395139 = CARTESIAN_POINT('',(124.37500008797,-64.94999991202,1.51)); +#395140 = DIRECTION('',(0.,0.,-1.)); +#395141 = DIRECTION('',(-3.909953458166E-07,-1.,-0.)); +#395142 = ADVANCED_FACE('',(#395143),#395159,.T.); +#395143 = FACE_BOUND('',#395144,.T.); +#395144 = EDGE_LOOP('',(#395145,#395146,#395152,#395153)); +#395145 = ORIENTED_EDGE('',*,*,#395123,.T.); +#395146 = ORIENTED_EDGE('',*,*,#395147,.T.); +#395147 = EDGE_CURVE('',#395115,#394915,#395148,.T.); +#395148 = LINE('',#395149,#395150); +#395149 = CARTESIAN_POINT('',(124.15,-64.95,1.55)); +#395150 = VECTOR('',#395151,1.); +#395151 = DIRECTION('',(0.,1.,0.)); +#395152 = ORIENTED_EDGE('',*,*,#394912,.F.); +#395153 = ORIENTED_EDGE('',*,*,#395154,.F.); +#395154 = EDGE_CURVE('',#395124,#394913,#395155,.T.); +#395155 = LINE('',#395156,#395157); +#395156 = CARTESIAN_POINT('',(124.15,-64.95,1.51)); +#395157 = VECTOR('',#395158,1.); +#395158 = DIRECTION('',(0.,1.,0.)); +#395159 = PLANE('',#395160); +#395160 = AXIS2_PLACEMENT_3D('',#395161,#395162,#395163); +#395161 = CARTESIAN_POINT('',(124.15,-64.95,1.51)); +#395162 = DIRECTION('',(-1.,0.,0.)); +#395163 = DIRECTION('',(0.,1.,0.)); +#395164 = ADVANCED_FACE('',(#395165),#395175,.F.); +#395165 = FACE_BOUND('',#395166,.T.); +#395166 = EDGE_LOOP('',(#395167,#395168,#395169,#395170,#395171,#395172, + #395173,#395174)); +#395167 = ORIENTED_EDGE('',*,*,#394939,.T.); +#395168 = ORIENTED_EDGE('',*,*,#394971,.T.); +#395169 = ORIENTED_EDGE('',*,*,#395003,.T.); +#395170 = ORIENTED_EDGE('',*,*,#395035,.T.); +#395171 = ORIENTED_EDGE('',*,*,#395067,.T.); +#395172 = ORIENTED_EDGE('',*,*,#395099,.T.); +#395173 = ORIENTED_EDGE('',*,*,#395131,.T.); +#395174 = ORIENTED_EDGE('',*,*,#395154,.T.); +#395175 = PLANE('',#395176); +#395176 = AXIS2_PLACEMENT_3D('',#395177,#395178,#395179); +#395177 = CARTESIAN_POINT('',(0.,0.,1.51)); +#395178 = DIRECTION('',(0.,0.,1.)); +#395179 = DIRECTION('',(1.,0.,-0.)); +#395180 = ADVANCED_FACE('',(#395181),#395191,.T.); +#395181 = FACE_BOUND('',#395182,.F.); +#395182 = EDGE_LOOP('',(#395183,#395184,#395185,#395186,#395187,#395188, + #395189,#395190)); +#395183 = ORIENTED_EDGE('',*,*,#394922,.T.); +#395184 = ORIENTED_EDGE('',*,*,#394955,.T.); +#395185 = ORIENTED_EDGE('',*,*,#394986,.T.); +#395186 = ORIENTED_EDGE('',*,*,#395019,.T.); +#395187 = ORIENTED_EDGE('',*,*,#395050,.T.); +#395188 = ORIENTED_EDGE('',*,*,#395083,.T.); +#395189 = ORIENTED_EDGE('',*,*,#395114,.T.); +#395190 = ORIENTED_EDGE('',*,*,#395147,.T.); +#395191 = PLANE('',#395192); +#395192 = AXIS2_PLACEMENT_3D('',#395193,#395194,#395195); +#395193 = CARTESIAN_POINT('',(0.,0.,1.55)); +#395194 = DIRECTION('',(0.,0.,1.)); +#395195 = DIRECTION('',(1.,0.,-0.)); +#395196 = MANIFOLD_SOLID_BREP('',#395197); +#395197 = CLOSED_SHELL('',(#395198,#395240,#395271,#395304,#395335, + #395368,#395399,#395432,#395454,#395470)); +#395198 = ADVANCED_FACE('',(#395199),#395235,.T.); +#395199 = FACE_BOUND('',#395200,.T.); +#395200 = EDGE_LOOP('',(#395201,#395211,#395220,#395228)); +#395201 = ORIENTED_EDGE('',*,*,#395202,.T.); +#395202 = EDGE_CURVE('',#395203,#395205,#395207,.T.); +#395203 = VERTEX_POINT('',#395204); +#395204 = CARTESIAN_POINT('',(121.75,-100.375,1.51)); +#395205 = VERTEX_POINT('',#395206); +#395206 = CARTESIAN_POINT('',(121.75,-100.375,1.55)); +#395207 = LINE('',#395208,#395209); +#395208 = CARTESIAN_POINT('',(121.75,-100.375,1.51)); +#395209 = VECTOR('',#395210,1.); +#395210 = DIRECTION('',(0.,0.,1.)); +#395211 = ORIENTED_EDGE('',*,*,#395212,.T.); +#395212 = EDGE_CURVE('',#395205,#395213,#395215,.T.); +#395213 = VERTEX_POINT('',#395214); +#395214 = CARTESIAN_POINT('',(121.9,-100.225,1.55)); +#395215 = CIRCLE('',#395216,0.150000058649); +#395216 = AXIS2_PLACEMENT_3D('',#395217,#395218,#395219); +#395217 = CARTESIAN_POINT('',(121.90000005864,-100.3750000586,1.55)); +#395218 = DIRECTION('',(0.,0.,-1.)); +#395219 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#395220 = ORIENTED_EDGE('',*,*,#395221,.F.); +#395221 = EDGE_CURVE('',#395222,#395213,#395224,.T.); +#395222 = VERTEX_POINT('',#395223); +#395223 = CARTESIAN_POINT('',(121.9,-100.225,1.51)); +#395224 = LINE('',#395225,#395226); +#395225 = CARTESIAN_POINT('',(121.9,-100.225,1.51)); +#395226 = VECTOR('',#395227,1.); +#395227 = DIRECTION('',(0.,0.,1.)); +#395228 = ORIENTED_EDGE('',*,*,#395229,.F.); +#395229 = EDGE_CURVE('',#395203,#395222,#395230,.T.); +#395230 = CIRCLE('',#395231,0.150000058649); +#395231 = AXIS2_PLACEMENT_3D('',#395232,#395233,#395234); +#395232 = CARTESIAN_POINT('',(121.90000005864,-100.3750000586,1.51)); +#395233 = DIRECTION('',(0.,0.,-1.)); +#395234 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#395235 = CYLINDRICAL_SURFACE('',#395236,0.150000058649); +#395236 = AXIS2_PLACEMENT_3D('',#395237,#395238,#395239); +#395237 = CARTESIAN_POINT('',(121.90000005864,-100.3750000586,1.51)); +#395238 = DIRECTION('',(0.,0.,-1.)); +#395239 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#395240 = ADVANCED_FACE('',(#395241),#395266,.T.); +#395241 = FACE_BOUND('',#395242,.T.); +#395242 = EDGE_LOOP('',(#395243,#395244,#395252,#395260)); +#395243 = ORIENTED_EDGE('',*,*,#395221,.T.); +#395244 = ORIENTED_EDGE('',*,*,#395245,.T.); +#395245 = EDGE_CURVE('',#395213,#395246,#395248,.T.); +#395246 = VERTEX_POINT('',#395247); +#395247 = CARTESIAN_POINT('',(123.4,-100.225,1.55)); +#395248 = LINE('',#395249,#395250); +#395249 = CARTESIAN_POINT('',(121.9,-100.225,1.55)); +#395250 = VECTOR('',#395251,1.); +#395251 = DIRECTION('',(1.,0.,0.)); +#395252 = ORIENTED_EDGE('',*,*,#395253,.F.); +#395253 = EDGE_CURVE('',#395254,#395246,#395256,.T.); +#395254 = VERTEX_POINT('',#395255); +#395255 = CARTESIAN_POINT('',(123.4,-100.225,1.51)); +#395256 = LINE('',#395257,#395258); +#395257 = CARTESIAN_POINT('',(123.4,-100.225,1.51)); +#395258 = VECTOR('',#395259,1.); +#395259 = DIRECTION('',(0.,0.,1.)); +#395260 = ORIENTED_EDGE('',*,*,#395261,.F.); +#395261 = EDGE_CURVE('',#395222,#395254,#395262,.T.); +#395262 = LINE('',#395263,#395264); +#395263 = CARTESIAN_POINT('',(121.9,-100.225,1.51)); +#395264 = VECTOR('',#395265,1.); +#395265 = DIRECTION('',(1.,0.,0.)); +#395266 = PLANE('',#395267); +#395267 = AXIS2_PLACEMENT_3D('',#395268,#395269,#395270); +#395268 = CARTESIAN_POINT('',(121.9,-100.225,1.51)); +#395269 = DIRECTION('',(0.,1.,0.)); +#395270 = DIRECTION('',(1.,0.,0.)); +#395271 = ADVANCED_FACE('',(#395272),#395299,.T.); +#395272 = FACE_BOUND('',#395273,.T.); +#395273 = EDGE_LOOP('',(#395274,#395275,#395284,#395292)); +#395274 = ORIENTED_EDGE('',*,*,#395253,.T.); +#395275 = ORIENTED_EDGE('',*,*,#395276,.T.); +#395276 = EDGE_CURVE('',#395246,#395277,#395279,.T.); +#395277 = VERTEX_POINT('',#395278); +#395278 = CARTESIAN_POINT('',(123.55,-100.375,1.55)); +#395279 = CIRCLE('',#395280,0.150000058649); +#395280 = AXIS2_PLACEMENT_3D('',#395281,#395282,#395283); +#395281 = CARTESIAN_POINT('',(123.39999994135,-100.3750000586,1.55)); +#395282 = DIRECTION('',(0.,0.,-1.)); +#395283 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#395284 = ORIENTED_EDGE('',*,*,#395285,.F.); +#395285 = EDGE_CURVE('',#395286,#395277,#395288,.T.); +#395286 = VERTEX_POINT('',#395287); +#395287 = CARTESIAN_POINT('',(123.55,-100.375,1.51)); +#395288 = LINE('',#395289,#395290); +#395289 = CARTESIAN_POINT('',(123.55,-100.375,1.51)); +#395290 = VECTOR('',#395291,1.); +#395291 = DIRECTION('',(0.,0.,1.)); +#395292 = ORIENTED_EDGE('',*,*,#395293,.F.); +#395293 = EDGE_CURVE('',#395254,#395286,#395294,.T.); +#395294 = CIRCLE('',#395295,0.150000058649); +#395295 = AXIS2_PLACEMENT_3D('',#395296,#395297,#395298); +#395296 = CARTESIAN_POINT('',(123.39999994135,-100.3750000586,1.51)); +#395297 = DIRECTION('',(0.,0.,-1.)); +#395298 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#395299 = CYLINDRICAL_SURFACE('',#395300,0.150000058649); +#395300 = AXIS2_PLACEMENT_3D('',#395301,#395302,#395303); +#395301 = CARTESIAN_POINT('',(123.39999994135,-100.3750000586,1.51)); +#395302 = DIRECTION('',(0.,0.,-1.)); +#395303 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#395304 = ADVANCED_FACE('',(#395305),#395330,.T.); +#395305 = FACE_BOUND('',#395306,.T.); +#395306 = EDGE_LOOP('',(#395307,#395308,#395316,#395324)); +#395307 = ORIENTED_EDGE('',*,*,#395285,.T.); +#395308 = ORIENTED_EDGE('',*,*,#395309,.T.); +#395309 = EDGE_CURVE('',#395277,#395310,#395312,.T.); +#395310 = VERTEX_POINT('',#395311); +#395311 = CARTESIAN_POINT('',(123.55,-100.675,1.55)); +#395312 = LINE('',#395313,#395314); +#395313 = CARTESIAN_POINT('',(123.55,-100.375,1.55)); +#395314 = VECTOR('',#395315,1.); +#395315 = DIRECTION('',(0.,-1.,0.)); +#395316 = ORIENTED_EDGE('',*,*,#395317,.F.); +#395317 = EDGE_CURVE('',#395318,#395310,#395320,.T.); +#395318 = VERTEX_POINT('',#395319); +#395319 = CARTESIAN_POINT('',(123.55,-100.675,1.51)); +#395320 = LINE('',#395321,#395322); +#395321 = CARTESIAN_POINT('',(123.55,-100.675,1.51)); +#395322 = VECTOR('',#395323,1.); +#395323 = DIRECTION('',(0.,0.,1.)); +#395324 = ORIENTED_EDGE('',*,*,#395325,.F.); +#395325 = EDGE_CURVE('',#395286,#395318,#395326,.T.); +#395326 = LINE('',#395327,#395328); +#395327 = CARTESIAN_POINT('',(123.55,-100.375,1.51)); +#395328 = VECTOR('',#395329,1.); +#395329 = DIRECTION('',(0.,-1.,0.)); +#395330 = PLANE('',#395331); +#395331 = AXIS2_PLACEMENT_3D('',#395332,#395333,#395334); +#395332 = CARTESIAN_POINT('',(123.55,-100.375,1.51)); +#395333 = DIRECTION('',(1.,0.,-0.)); +#395334 = DIRECTION('',(0.,-1.,0.)); +#395335 = ADVANCED_FACE('',(#395336),#395363,.T.); +#395336 = FACE_BOUND('',#395337,.T.); +#395337 = EDGE_LOOP('',(#395338,#395339,#395348,#395356)); +#395338 = ORIENTED_EDGE('',*,*,#395317,.T.); +#395339 = ORIENTED_EDGE('',*,*,#395340,.T.); +#395340 = EDGE_CURVE('',#395310,#395341,#395343,.T.); +#395341 = VERTEX_POINT('',#395342); +#395342 = CARTESIAN_POINT('',(123.4,-100.825,1.55)); +#395343 = CIRCLE('',#395344,0.150000058649); +#395344 = AXIS2_PLACEMENT_3D('',#395345,#395346,#395347); +#395345 = CARTESIAN_POINT('',(123.39999994135,-100.6749999413,1.55)); +#395346 = DIRECTION('',(0.,0.,-1.)); +#395347 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#395348 = ORIENTED_EDGE('',*,*,#395349,.F.); +#395349 = EDGE_CURVE('',#395350,#395341,#395352,.T.); +#395350 = VERTEX_POINT('',#395351); +#395351 = CARTESIAN_POINT('',(123.4,-100.825,1.51)); +#395352 = LINE('',#395353,#395354); +#395353 = CARTESIAN_POINT('',(123.4,-100.825,1.51)); +#395354 = VECTOR('',#395355,1.); +#395355 = DIRECTION('',(0.,0.,1.)); +#395356 = ORIENTED_EDGE('',*,*,#395357,.F.); +#395357 = EDGE_CURVE('',#395318,#395350,#395358,.T.); +#395358 = CIRCLE('',#395359,0.150000058649); +#395359 = AXIS2_PLACEMENT_3D('',#395360,#395361,#395362); +#395360 = CARTESIAN_POINT('',(123.39999994135,-100.6749999413,1.51)); +#395361 = DIRECTION('',(0.,0.,-1.)); +#395362 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#395363 = CYLINDRICAL_SURFACE('',#395364,0.150000058649); +#395364 = AXIS2_PLACEMENT_3D('',#395365,#395366,#395367); +#395365 = CARTESIAN_POINT('',(123.39999994135,-100.6749999413,1.51)); +#395366 = DIRECTION('',(0.,0.,-1.)); +#395367 = DIRECTION('',(1.,-3.90995314237E-07,0.)); +#395368 = ADVANCED_FACE('',(#395369),#395394,.T.); +#395369 = FACE_BOUND('',#395370,.T.); +#395370 = EDGE_LOOP('',(#395371,#395372,#395380,#395388)); +#395371 = ORIENTED_EDGE('',*,*,#395349,.T.); +#395372 = ORIENTED_EDGE('',*,*,#395373,.T.); +#395373 = EDGE_CURVE('',#395341,#395374,#395376,.T.); +#395374 = VERTEX_POINT('',#395375); +#395375 = CARTESIAN_POINT('',(121.9,-100.825,1.55)); +#395376 = LINE('',#395377,#395378); +#395377 = CARTESIAN_POINT('',(123.4,-100.825,1.55)); +#395378 = VECTOR('',#395379,1.); +#395379 = DIRECTION('',(-1.,0.,0.)); +#395380 = ORIENTED_EDGE('',*,*,#395381,.F.); +#395381 = EDGE_CURVE('',#395382,#395374,#395384,.T.); +#395382 = VERTEX_POINT('',#395383); +#395383 = CARTESIAN_POINT('',(121.9,-100.825,1.51)); +#395384 = LINE('',#395385,#395386); +#395385 = CARTESIAN_POINT('',(121.9,-100.825,1.51)); +#395386 = VECTOR('',#395387,1.); +#395387 = DIRECTION('',(0.,0.,1.)); +#395388 = ORIENTED_EDGE('',*,*,#395389,.F.); +#395389 = EDGE_CURVE('',#395350,#395382,#395390,.T.); +#395390 = LINE('',#395391,#395392); +#395391 = CARTESIAN_POINT('',(123.4,-100.825,1.51)); +#395392 = VECTOR('',#395393,1.); +#395393 = DIRECTION('',(-1.,0.,0.)); +#395394 = PLANE('',#395395); +#395395 = AXIS2_PLACEMENT_3D('',#395396,#395397,#395398); +#395396 = CARTESIAN_POINT('',(123.4,-100.825,1.51)); +#395397 = DIRECTION('',(0.,-1.,0.)); +#395398 = DIRECTION('',(-1.,0.,0.)); +#395399 = ADVANCED_FACE('',(#395400),#395427,.T.); +#395400 = FACE_BOUND('',#395401,.T.); +#395401 = EDGE_LOOP('',(#395402,#395403,#395412,#395420)); +#395402 = ORIENTED_EDGE('',*,*,#395381,.T.); +#395403 = ORIENTED_EDGE('',*,*,#395404,.T.); +#395404 = EDGE_CURVE('',#395374,#395405,#395407,.T.); +#395405 = VERTEX_POINT('',#395406); +#395406 = CARTESIAN_POINT('',(121.75,-100.675,1.55)); +#395407 = CIRCLE('',#395408,0.150000058649); +#395408 = AXIS2_PLACEMENT_3D('',#395409,#395410,#395411); +#395409 = CARTESIAN_POINT('',(121.90000005864,-100.6749999413,1.55)); +#395410 = DIRECTION('',(0.,0.,-1.)); +#395411 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#395412 = ORIENTED_EDGE('',*,*,#395413,.F.); +#395413 = EDGE_CURVE('',#395414,#395405,#395416,.T.); +#395414 = VERTEX_POINT('',#395415); +#395415 = CARTESIAN_POINT('',(121.75,-100.675,1.51)); +#395416 = LINE('',#395417,#395418); +#395417 = CARTESIAN_POINT('',(121.75,-100.675,1.51)); +#395418 = VECTOR('',#395419,1.); +#395419 = DIRECTION('',(0.,0.,1.)); +#395420 = ORIENTED_EDGE('',*,*,#395421,.F.); +#395421 = EDGE_CURVE('',#395382,#395414,#395422,.T.); +#395422 = CIRCLE('',#395423,0.150000058649); +#395423 = AXIS2_PLACEMENT_3D('',#395424,#395425,#395426); +#395424 = CARTESIAN_POINT('',(121.90000005864,-100.6749999413,1.51)); +#395425 = DIRECTION('',(0.,0.,-1.)); +#395426 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#395427 = CYLINDRICAL_SURFACE('',#395428,0.150000058649); +#395428 = AXIS2_PLACEMENT_3D('',#395429,#395430,#395431); +#395429 = CARTESIAN_POINT('',(121.90000005864,-100.6749999413,1.51)); +#395430 = DIRECTION('',(0.,0.,-1.)); +#395431 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#395432 = ADVANCED_FACE('',(#395433),#395449,.T.); +#395433 = FACE_BOUND('',#395434,.T.); +#395434 = EDGE_LOOP('',(#395435,#395436,#395442,#395443)); +#395435 = ORIENTED_EDGE('',*,*,#395413,.T.); +#395436 = ORIENTED_EDGE('',*,*,#395437,.T.); +#395437 = EDGE_CURVE('',#395405,#395205,#395438,.T.); +#395438 = LINE('',#395439,#395440); +#395439 = CARTESIAN_POINT('',(121.75,-100.675,1.55)); +#395440 = VECTOR('',#395441,1.); +#395441 = DIRECTION('',(0.,1.,0.)); +#395442 = ORIENTED_EDGE('',*,*,#395202,.F.); +#395443 = ORIENTED_EDGE('',*,*,#395444,.F.); +#395444 = EDGE_CURVE('',#395414,#395203,#395445,.T.); +#395445 = LINE('',#395446,#395447); +#395446 = CARTESIAN_POINT('',(121.75,-100.675,1.51)); +#395447 = VECTOR('',#395448,1.); +#395448 = DIRECTION('',(0.,1.,0.)); +#395449 = PLANE('',#395450); +#395450 = AXIS2_PLACEMENT_3D('',#395451,#395452,#395453); +#395451 = CARTESIAN_POINT('',(121.75,-100.675,1.51)); +#395452 = DIRECTION('',(-1.,0.,0.)); +#395453 = DIRECTION('',(0.,1.,0.)); +#395454 = ADVANCED_FACE('',(#395455),#395465,.F.); +#395455 = FACE_BOUND('',#395456,.T.); +#395456 = EDGE_LOOP('',(#395457,#395458,#395459,#395460,#395461,#395462, + #395463,#395464)); +#395457 = ORIENTED_EDGE('',*,*,#395229,.T.); +#395458 = ORIENTED_EDGE('',*,*,#395261,.T.); +#395459 = ORIENTED_EDGE('',*,*,#395293,.T.); +#395460 = ORIENTED_EDGE('',*,*,#395325,.T.); +#395461 = ORIENTED_EDGE('',*,*,#395357,.T.); +#395462 = ORIENTED_EDGE('',*,*,#395389,.T.); +#395463 = ORIENTED_EDGE('',*,*,#395421,.T.); +#395464 = ORIENTED_EDGE('',*,*,#395444,.T.); +#395465 = PLANE('',#395466); +#395466 = AXIS2_PLACEMENT_3D('',#395467,#395468,#395469); +#395467 = CARTESIAN_POINT('',(0.,0.,1.51)); +#395468 = DIRECTION('',(0.,0.,1.)); +#395469 = DIRECTION('',(1.,0.,-0.)); +#395470 = ADVANCED_FACE('',(#395471),#395481,.T.); +#395471 = FACE_BOUND('',#395472,.F.); +#395472 = EDGE_LOOP('',(#395473,#395474,#395475,#395476,#395477,#395478, + #395479,#395480)); +#395473 = ORIENTED_EDGE('',*,*,#395212,.T.); +#395474 = ORIENTED_EDGE('',*,*,#395245,.T.); +#395475 = ORIENTED_EDGE('',*,*,#395276,.T.); +#395476 = ORIENTED_EDGE('',*,*,#395309,.T.); +#395477 = ORIENTED_EDGE('',*,*,#395340,.T.); +#395478 = ORIENTED_EDGE('',*,*,#395373,.T.); +#395479 = ORIENTED_EDGE('',*,*,#395404,.T.); +#395480 = ORIENTED_EDGE('',*,*,#395437,.T.); +#395481 = PLANE('',#395482); +#395482 = AXIS2_PLACEMENT_3D('',#395483,#395484,#395485); +#395483 = CARTESIAN_POINT('',(0.,0.,1.55)); +#395484 = DIRECTION('',(0.,0.,1.)); +#395485 = DIRECTION('',(1.,0.,-0.)); +#395486 = MANIFOLD_SOLID_BREP('',#395487); +#395487 = CLOSED_SHELL('',(#395488,#395530,#395561,#395594,#395625, + #395658,#395689,#395722,#395744,#395760)); +#395488 = ADVANCED_FACE('',(#395489),#395525,.T.); +#395489 = FACE_BOUND('',#395490,.T.); +#395490 = EDGE_LOOP('',(#395491,#395501,#395510,#395518)); +#395491 = ORIENTED_EDGE('',*,*,#395492,.T.); +#395492 = EDGE_CURVE('',#395493,#395495,#395497,.T.); +#395493 = VERTEX_POINT('',#395494); +#395494 = CARTESIAN_POINT('',(141.94,-129.84,1.51)); +#395495 = VERTEX_POINT('',#395496); +#395496 = CARTESIAN_POINT('',(141.94,-129.84,1.55)); +#395497 = LINE('',#395498,#395499); +#395498 = CARTESIAN_POINT('',(141.94,-129.84,1.51)); +#395499 = VECTOR('',#395500,1.); +#395500 = DIRECTION('',(0.,0.,1.)); +#395501 = ORIENTED_EDGE('',*,*,#395502,.T.); +#395502 = EDGE_CURVE('',#395495,#395503,#395505,.T.); +#395503 = VERTEX_POINT('',#395504); +#395504 = CARTESIAN_POINT('',(142.08,-129.7,1.55)); +#395505 = CIRCLE('',#395506,0.139999827125); +#395506 = AXIS2_PLACEMENT_3D('',#395507,#395508,#395509); +#395507 = CARTESIAN_POINT('',(142.07999982712,-129.8399998271,1.55)); +#395508 = DIRECTION('',(0.,0.,-1.)); +#395509 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#395510 = ORIENTED_EDGE('',*,*,#395511,.F.); +#395511 = EDGE_CURVE('',#395512,#395503,#395514,.T.); +#395512 = VERTEX_POINT('',#395513); +#395513 = CARTESIAN_POINT('',(142.08,-129.7,1.51)); +#395514 = LINE('',#395515,#395516); +#395515 = CARTESIAN_POINT('',(142.08,-129.7,1.51)); +#395516 = VECTOR('',#395517,1.); +#395517 = DIRECTION('',(0.,0.,1.)); +#395518 = ORIENTED_EDGE('',*,*,#395519,.F.); +#395519 = EDGE_CURVE('',#395493,#395512,#395520,.T.); +#395520 = CIRCLE('',#395521,0.139999827125); +#395521 = AXIS2_PLACEMENT_3D('',#395522,#395523,#395524); +#395522 = CARTESIAN_POINT('',(142.07999982712,-129.8399998271,1.51)); +#395523 = DIRECTION('',(0.,0.,-1.)); +#395524 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#395525 = CYLINDRICAL_SURFACE('',#395526,0.139999827125); +#395526 = AXIS2_PLACEMENT_3D('',#395527,#395528,#395529); +#395527 = CARTESIAN_POINT('',(142.07999982712,-129.8399998271,1.51)); +#395528 = DIRECTION('',(0.,0.,-1.)); +#395529 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#395530 = ADVANCED_FACE('',(#395531),#395556,.T.); +#395531 = FACE_BOUND('',#395532,.T.); +#395532 = EDGE_LOOP('',(#395533,#395534,#395542,#395550)); +#395533 = ORIENTED_EDGE('',*,*,#395511,.T.); +#395534 = ORIENTED_EDGE('',*,*,#395535,.T.); +#395535 = EDGE_CURVE('',#395503,#395536,#395538,.T.); +#395536 = VERTEX_POINT('',#395537); +#395537 = CARTESIAN_POINT('',(142.42,-129.7,1.55)); +#395538 = LINE('',#395539,#395540); +#395539 = CARTESIAN_POINT('',(142.08,-129.7,1.55)); +#395540 = VECTOR('',#395541,1.); +#395541 = DIRECTION('',(1.,0.,0.)); +#395542 = ORIENTED_EDGE('',*,*,#395543,.F.); +#395543 = EDGE_CURVE('',#395544,#395536,#395546,.T.); +#395544 = VERTEX_POINT('',#395545); +#395545 = CARTESIAN_POINT('',(142.42,-129.7,1.51)); +#395546 = LINE('',#395547,#395548); +#395547 = CARTESIAN_POINT('',(142.42,-129.7,1.51)); +#395548 = VECTOR('',#395549,1.); +#395549 = DIRECTION('',(0.,0.,1.)); +#395550 = ORIENTED_EDGE('',*,*,#395551,.F.); +#395551 = EDGE_CURVE('',#395512,#395544,#395552,.T.); +#395552 = LINE('',#395553,#395554); +#395553 = CARTESIAN_POINT('',(142.08,-129.7,1.51)); +#395554 = VECTOR('',#395555,1.); +#395555 = DIRECTION('',(1.,0.,0.)); +#395556 = PLANE('',#395557); +#395557 = AXIS2_PLACEMENT_3D('',#395558,#395559,#395560); +#395558 = CARTESIAN_POINT('',(142.08,-129.7,1.51)); +#395559 = DIRECTION('',(0.,1.,0.)); +#395560 = DIRECTION('',(1.,0.,0.)); +#395561 = ADVANCED_FACE('',(#395562),#395589,.T.); +#395562 = FACE_BOUND('',#395563,.T.); +#395563 = EDGE_LOOP('',(#395564,#395565,#395574,#395582)); +#395564 = ORIENTED_EDGE('',*,*,#395543,.T.); +#395565 = ORIENTED_EDGE('',*,*,#395566,.T.); +#395566 = EDGE_CURVE('',#395536,#395567,#395569,.T.); +#395567 = VERTEX_POINT('',#395568); +#395568 = CARTESIAN_POINT('',(142.56,-129.84,1.55)); +#395569 = CIRCLE('',#395570,0.139999827125); +#395570 = AXIS2_PLACEMENT_3D('',#395571,#395572,#395573); +#395571 = CARTESIAN_POINT('',(142.42000017287,-129.8399998271,1.55)); +#395572 = DIRECTION('',(0.,0.,-1.)); +#395573 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#395574 = ORIENTED_EDGE('',*,*,#395575,.F.); +#395575 = EDGE_CURVE('',#395576,#395567,#395578,.T.); +#395576 = VERTEX_POINT('',#395577); +#395577 = CARTESIAN_POINT('',(142.56,-129.84,1.51)); +#395578 = LINE('',#395579,#395580); +#395579 = CARTESIAN_POINT('',(142.56,-129.84,1.51)); +#395580 = VECTOR('',#395581,1.); +#395581 = DIRECTION('',(0.,0.,1.)); +#395582 = ORIENTED_EDGE('',*,*,#395583,.F.); +#395583 = EDGE_CURVE('',#395544,#395576,#395584,.T.); +#395584 = CIRCLE('',#395585,0.139999827125); +#395585 = AXIS2_PLACEMENT_3D('',#395586,#395587,#395588); +#395586 = CARTESIAN_POINT('',(142.42000017287,-129.8399998271,1.51)); +#395587 = DIRECTION('',(0.,0.,-1.)); +#395588 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#395589 = CYLINDRICAL_SURFACE('',#395590,0.139999827125); +#395590 = AXIS2_PLACEMENT_3D('',#395591,#395592,#395593); +#395591 = CARTESIAN_POINT('',(142.42000017287,-129.8399998271,1.51)); +#395592 = DIRECTION('',(0.,0.,-1.)); +#395593 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#395594 = ADVANCED_FACE('',(#395595),#395620,.T.); +#395595 = FACE_BOUND('',#395596,.T.); +#395596 = EDGE_LOOP('',(#395597,#395598,#395606,#395614)); +#395597 = ORIENTED_EDGE('',*,*,#395575,.T.); +#395598 = ORIENTED_EDGE('',*,*,#395599,.T.); +#395599 = EDGE_CURVE('',#395567,#395600,#395602,.T.); +#395600 = VERTEX_POINT('',#395601); +#395601 = CARTESIAN_POINT('',(142.56,-130.12,1.55)); +#395602 = LINE('',#395603,#395604); +#395603 = CARTESIAN_POINT('',(142.56,-129.84,1.55)); +#395604 = VECTOR('',#395605,1.); +#395605 = DIRECTION('',(0.,-1.,0.)); +#395606 = ORIENTED_EDGE('',*,*,#395607,.F.); +#395607 = EDGE_CURVE('',#395608,#395600,#395610,.T.); +#395608 = VERTEX_POINT('',#395609); +#395609 = CARTESIAN_POINT('',(142.56,-130.12,1.51)); +#395610 = LINE('',#395611,#395612); +#395611 = CARTESIAN_POINT('',(142.56,-130.12,1.51)); +#395612 = VECTOR('',#395613,1.); +#395613 = DIRECTION('',(0.,0.,1.)); +#395614 = ORIENTED_EDGE('',*,*,#395615,.F.); +#395615 = EDGE_CURVE('',#395576,#395608,#395616,.T.); +#395616 = LINE('',#395617,#395618); +#395617 = CARTESIAN_POINT('',(142.56,-129.84,1.51)); +#395618 = VECTOR('',#395619,1.); +#395619 = DIRECTION('',(0.,-1.,0.)); +#395620 = PLANE('',#395621); +#395621 = AXIS2_PLACEMENT_3D('',#395622,#395623,#395624); +#395622 = CARTESIAN_POINT('',(142.56,-129.84,1.51)); +#395623 = DIRECTION('',(1.,0.,-0.)); +#395624 = DIRECTION('',(0.,-1.,0.)); +#395625 = ADVANCED_FACE('',(#395626),#395653,.T.); +#395626 = FACE_BOUND('',#395627,.T.); +#395627 = EDGE_LOOP('',(#395628,#395629,#395638,#395646)); +#395628 = ORIENTED_EDGE('',*,*,#395607,.T.); +#395629 = ORIENTED_EDGE('',*,*,#395630,.T.); +#395630 = EDGE_CURVE('',#395600,#395631,#395633,.T.); +#395631 = VERTEX_POINT('',#395632); +#395632 = CARTESIAN_POINT('',(142.42,-130.26,1.55)); +#395633 = CIRCLE('',#395634,0.139999827125); +#395634 = AXIS2_PLACEMENT_3D('',#395635,#395636,#395637); +#395635 = CARTESIAN_POINT('',(142.42000017287,-130.1200001728,1.55)); +#395636 = DIRECTION('',(0.,0.,-1.)); +#395637 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#395638 = ORIENTED_EDGE('',*,*,#395639,.F.); +#395639 = EDGE_CURVE('',#395640,#395631,#395642,.T.); +#395640 = VERTEX_POINT('',#395641); +#395641 = CARTESIAN_POINT('',(142.42,-130.26,1.51)); +#395642 = LINE('',#395643,#395644); +#395643 = CARTESIAN_POINT('',(142.42,-130.26,1.51)); +#395644 = VECTOR('',#395645,1.); +#395645 = DIRECTION('',(0.,0.,1.)); +#395646 = ORIENTED_EDGE('',*,*,#395647,.F.); +#395647 = EDGE_CURVE('',#395608,#395640,#395648,.T.); +#395648 = CIRCLE('',#395649,0.139999827125); +#395649 = AXIS2_PLACEMENT_3D('',#395650,#395651,#395652); +#395650 = CARTESIAN_POINT('',(142.42000017287,-130.1200001728,1.51)); +#395651 = DIRECTION('',(0.,0.,-1.)); +#395652 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#395653 = CYLINDRICAL_SURFACE('',#395654,0.139999827125); +#395654 = AXIS2_PLACEMENT_3D('',#395655,#395656,#395657); +#395655 = CARTESIAN_POINT('',(142.42000017287,-130.1200001728,1.51)); +#395656 = DIRECTION('',(0.,0.,-1.)); +#395657 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#395658 = ADVANCED_FACE('',(#395659),#395684,.T.); +#395659 = FACE_BOUND('',#395660,.T.); +#395660 = EDGE_LOOP('',(#395661,#395662,#395670,#395678)); +#395661 = ORIENTED_EDGE('',*,*,#395639,.T.); +#395662 = ORIENTED_EDGE('',*,*,#395663,.T.); +#395663 = EDGE_CURVE('',#395631,#395664,#395666,.T.); +#395664 = VERTEX_POINT('',#395665); +#395665 = CARTESIAN_POINT('',(142.08,-130.26,1.55)); +#395666 = LINE('',#395667,#395668); +#395667 = CARTESIAN_POINT('',(142.42,-130.26,1.55)); +#395668 = VECTOR('',#395669,1.); +#395669 = DIRECTION('',(-1.,0.,0.)); +#395670 = ORIENTED_EDGE('',*,*,#395671,.F.); +#395671 = EDGE_CURVE('',#395672,#395664,#395674,.T.); +#395672 = VERTEX_POINT('',#395673); +#395673 = CARTESIAN_POINT('',(142.08,-130.26,1.51)); +#395674 = LINE('',#395675,#395676); +#395675 = CARTESIAN_POINT('',(142.08,-130.26,1.51)); +#395676 = VECTOR('',#395677,1.); +#395677 = DIRECTION('',(0.,0.,1.)); +#395678 = ORIENTED_EDGE('',*,*,#395679,.F.); +#395679 = EDGE_CURVE('',#395640,#395672,#395680,.T.); +#395680 = LINE('',#395681,#395682); +#395681 = CARTESIAN_POINT('',(142.42,-130.26,1.51)); +#395682 = VECTOR('',#395683,1.); +#395683 = DIRECTION('',(-1.,0.,0.)); +#395684 = PLANE('',#395685); +#395685 = AXIS2_PLACEMENT_3D('',#395686,#395687,#395688); +#395686 = CARTESIAN_POINT('',(142.42,-130.26,1.51)); +#395687 = DIRECTION('',(0.,-1.,0.)); +#395688 = DIRECTION('',(-1.,0.,0.)); +#395689 = ADVANCED_FACE('',(#395690),#395717,.T.); +#395690 = FACE_BOUND('',#395691,.T.); +#395691 = EDGE_LOOP('',(#395692,#395693,#395702,#395710)); +#395692 = ORIENTED_EDGE('',*,*,#395671,.T.); +#395693 = ORIENTED_EDGE('',*,*,#395694,.T.); +#395694 = EDGE_CURVE('',#395664,#395695,#395697,.T.); +#395695 = VERTEX_POINT('',#395696); +#395696 = CARTESIAN_POINT('',(141.94,-130.12,1.55)); +#395697 = CIRCLE('',#395698,0.139999827125); +#395698 = AXIS2_PLACEMENT_3D('',#395699,#395700,#395701); +#395699 = CARTESIAN_POINT('',(142.07999982712,-130.1200001728,1.55)); +#395700 = DIRECTION('',(0.,0.,-1.)); +#395701 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#395702 = ORIENTED_EDGE('',*,*,#395703,.F.); +#395703 = EDGE_CURVE('',#395704,#395695,#395706,.T.); +#395704 = VERTEX_POINT('',#395705); +#395705 = CARTESIAN_POINT('',(141.94,-130.12,1.51)); +#395706 = LINE('',#395707,#395708); +#395707 = CARTESIAN_POINT('',(141.94,-130.12,1.51)); +#395708 = VECTOR('',#395709,1.); +#395709 = DIRECTION('',(0.,0.,1.)); +#395710 = ORIENTED_EDGE('',*,*,#395711,.F.); +#395711 = EDGE_CURVE('',#395672,#395704,#395712,.T.); +#395712 = CIRCLE('',#395713,0.139999827125); +#395713 = AXIS2_PLACEMENT_3D('',#395714,#395715,#395716); +#395714 = CARTESIAN_POINT('',(142.07999982712,-130.1200001728,1.51)); +#395715 = DIRECTION('',(0.,0.,-1.)); +#395716 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#395717 = CYLINDRICAL_SURFACE('',#395718,0.139999827125); +#395718 = AXIS2_PLACEMENT_3D('',#395719,#395720,#395721); +#395719 = CARTESIAN_POINT('',(142.07999982712,-130.1200001728,1.51)); +#395720 = DIRECTION('',(0.,0.,-1.)); +#395721 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#395722 = ADVANCED_FACE('',(#395723),#395739,.T.); +#395723 = FACE_BOUND('',#395724,.T.); +#395724 = EDGE_LOOP('',(#395725,#395726,#395732,#395733)); +#395725 = ORIENTED_EDGE('',*,*,#395703,.T.); +#395726 = ORIENTED_EDGE('',*,*,#395727,.T.); +#395727 = EDGE_CURVE('',#395695,#395495,#395728,.T.); +#395728 = LINE('',#395729,#395730); +#395729 = CARTESIAN_POINT('',(141.94,-130.12,1.55)); +#395730 = VECTOR('',#395731,1.); +#395731 = DIRECTION('',(0.,1.,0.)); +#395732 = ORIENTED_EDGE('',*,*,#395492,.F.); +#395733 = ORIENTED_EDGE('',*,*,#395734,.F.); +#395734 = EDGE_CURVE('',#395704,#395493,#395735,.T.); +#395735 = LINE('',#395736,#395737); +#395736 = CARTESIAN_POINT('',(141.94,-130.12,1.51)); +#395737 = VECTOR('',#395738,1.); +#395738 = DIRECTION('',(0.,1.,0.)); +#395739 = PLANE('',#395740); +#395740 = AXIS2_PLACEMENT_3D('',#395741,#395742,#395743); +#395741 = CARTESIAN_POINT('',(141.94,-130.12,1.51)); +#395742 = DIRECTION('',(-1.,0.,0.)); +#395743 = DIRECTION('',(0.,1.,0.)); +#395744 = ADVANCED_FACE('',(#395745),#395755,.F.); +#395745 = FACE_BOUND('',#395746,.T.); +#395746 = EDGE_LOOP('',(#395747,#395748,#395749,#395750,#395751,#395752, + #395753,#395754)); +#395747 = ORIENTED_EDGE('',*,*,#395519,.T.); +#395748 = ORIENTED_EDGE('',*,*,#395551,.T.); +#395749 = ORIENTED_EDGE('',*,*,#395583,.T.); +#395750 = ORIENTED_EDGE('',*,*,#395615,.T.); +#395751 = ORIENTED_EDGE('',*,*,#395647,.T.); +#395752 = ORIENTED_EDGE('',*,*,#395679,.T.); +#395753 = ORIENTED_EDGE('',*,*,#395711,.T.); +#395754 = ORIENTED_EDGE('',*,*,#395734,.T.); +#395755 = PLANE('',#395756); +#395756 = AXIS2_PLACEMENT_3D('',#395757,#395758,#395759); +#395757 = CARTESIAN_POINT('',(0.,0.,1.51)); +#395758 = DIRECTION('',(0.,0.,1.)); +#395759 = DIRECTION('',(1.,0.,-0.)); +#395760 = ADVANCED_FACE('',(#395761),#395771,.T.); +#395761 = FACE_BOUND('',#395762,.F.); +#395762 = EDGE_LOOP('',(#395763,#395764,#395765,#395766,#395767,#395768, + #395769,#395770)); +#395763 = ORIENTED_EDGE('',*,*,#395502,.T.); +#395764 = ORIENTED_EDGE('',*,*,#395535,.T.); +#395765 = ORIENTED_EDGE('',*,*,#395566,.T.); +#395766 = ORIENTED_EDGE('',*,*,#395599,.T.); +#395767 = ORIENTED_EDGE('',*,*,#395630,.T.); +#395768 = ORIENTED_EDGE('',*,*,#395663,.T.); +#395769 = ORIENTED_EDGE('',*,*,#395694,.T.); +#395770 = ORIENTED_EDGE('',*,*,#395727,.T.); +#395771 = PLANE('',#395772); +#395772 = AXIS2_PLACEMENT_3D('',#395773,#395774,#395775); +#395773 = CARTESIAN_POINT('',(0.,0.,1.55)); +#395774 = DIRECTION('',(0.,0.,1.)); +#395775 = DIRECTION('',(1.,0.,-0.)); +#395776 = MANIFOLD_SOLID_BREP('',#395777); +#395777 = CLOSED_SHELL('',(#395778,#395820,#395851,#395884,#395915, + #395948,#395979,#396012,#396034,#396050)); +#395778 = ADVANCED_FACE('',(#395779),#395815,.T.); +#395779 = FACE_BOUND('',#395780,.T.); +#395780 = EDGE_LOOP('',(#395781,#395791,#395800,#395808)); +#395781 = ORIENTED_EDGE('',*,*,#395782,.T.); +#395782 = EDGE_CURVE('',#395783,#395785,#395787,.T.); +#395783 = VERTEX_POINT('',#395784); +#395784 = CARTESIAN_POINT('',(151.4,-90.35,1.51)); +#395785 = VERTEX_POINT('',#395786); +#395786 = CARTESIAN_POINT('',(151.4,-90.35,1.55)); +#395787 = LINE('',#395788,#395789); +#395788 = CARTESIAN_POINT('',(151.4,-90.35,1.51)); +#395789 = VECTOR('',#395790,1.); +#395790 = DIRECTION('',(0.,0.,1.)); +#395791 = ORIENTED_EDGE('',*,*,#395792,.T.); +#395792 = EDGE_CURVE('',#395785,#395793,#395795,.T.); +#395793 = VERTEX_POINT('',#395794); +#395794 = CARTESIAN_POINT('',(151.55,-90.2,1.55)); +#395795 = CIRCLE('',#395796,0.150000058649); +#395796 = AXIS2_PLACEMENT_3D('',#395797,#395798,#395799); +#395797 = CARTESIAN_POINT('',(151.55000005864,-90.35000005864,1.55)); +#395798 = DIRECTION('',(0.,0.,-1.)); +#395799 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#395800 = ORIENTED_EDGE('',*,*,#395801,.F.); +#395801 = EDGE_CURVE('',#395802,#395793,#395804,.T.); +#395802 = VERTEX_POINT('',#395803); +#395803 = CARTESIAN_POINT('',(151.55,-90.2,1.51)); +#395804 = LINE('',#395805,#395806); +#395805 = CARTESIAN_POINT('',(151.55,-90.2,1.51)); +#395806 = VECTOR('',#395807,1.); +#395807 = DIRECTION('',(0.,0.,1.)); +#395808 = ORIENTED_EDGE('',*,*,#395809,.F.); +#395809 = EDGE_CURVE('',#395783,#395802,#395810,.T.); +#395810 = CIRCLE('',#395811,0.150000058649); +#395811 = AXIS2_PLACEMENT_3D('',#395812,#395813,#395814); +#395812 = CARTESIAN_POINT('',(151.55000005864,-90.35000005864,1.51)); +#395813 = DIRECTION('',(0.,0.,-1.)); +#395814 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#395815 = CYLINDRICAL_SURFACE('',#395816,0.150000058649); +#395816 = AXIS2_PLACEMENT_3D('',#395817,#395818,#395819); +#395817 = CARTESIAN_POINT('',(151.55000005864,-90.35000005864,1.51)); +#395818 = DIRECTION('',(0.,0.,-1.)); +#395819 = DIRECTION('',(-1.,3.909955037149E-07,0.)); +#395820 = ADVANCED_FACE('',(#395821),#395846,.T.); +#395821 = FACE_BOUND('',#395822,.T.); +#395822 = EDGE_LOOP('',(#395823,#395824,#395832,#395840)); +#395823 = ORIENTED_EDGE('',*,*,#395801,.T.); +#395824 = ORIENTED_EDGE('',*,*,#395825,.T.); +#395825 = EDGE_CURVE('',#395793,#395826,#395828,.T.); +#395826 = VERTEX_POINT('',#395827); +#395827 = CARTESIAN_POINT('',(153.05,-90.2,1.55)); +#395828 = LINE('',#395829,#395830); +#395829 = CARTESIAN_POINT('',(151.55,-90.2,1.55)); +#395830 = VECTOR('',#395831,1.); +#395831 = DIRECTION('',(1.,0.,0.)); +#395832 = ORIENTED_EDGE('',*,*,#395833,.F.); +#395833 = EDGE_CURVE('',#395834,#395826,#395836,.T.); +#395834 = VERTEX_POINT('',#395835); +#395835 = CARTESIAN_POINT('',(153.05,-90.2,1.51)); +#395836 = LINE('',#395837,#395838); +#395837 = CARTESIAN_POINT('',(153.05,-90.2,1.51)); +#395838 = VECTOR('',#395839,1.); +#395839 = DIRECTION('',(0.,0.,1.)); +#395840 = ORIENTED_EDGE('',*,*,#395841,.F.); +#395841 = EDGE_CURVE('',#395802,#395834,#395842,.T.); +#395842 = LINE('',#395843,#395844); +#395843 = CARTESIAN_POINT('',(151.55,-90.2,1.51)); +#395844 = VECTOR('',#395845,1.); +#395845 = DIRECTION('',(1.,0.,0.)); +#395846 = PLANE('',#395847); +#395847 = AXIS2_PLACEMENT_3D('',#395848,#395849,#395850); +#395848 = CARTESIAN_POINT('',(151.55,-90.2,1.51)); +#395849 = DIRECTION('',(0.,1.,0.)); +#395850 = DIRECTION('',(1.,0.,0.)); +#395851 = ADVANCED_FACE('',(#395852),#395879,.T.); +#395852 = FACE_BOUND('',#395853,.T.); +#395853 = EDGE_LOOP('',(#395854,#395855,#395864,#395872)); +#395854 = ORIENTED_EDGE('',*,*,#395833,.T.); +#395855 = ORIENTED_EDGE('',*,*,#395856,.T.); +#395856 = EDGE_CURVE('',#395826,#395857,#395859,.T.); +#395857 = VERTEX_POINT('',#395858); +#395858 = CARTESIAN_POINT('',(153.2,-90.35,1.55)); +#395859 = CIRCLE('',#395860,0.150000058649); +#395860 = AXIS2_PLACEMENT_3D('',#395861,#395862,#395863); +#395861 = CARTESIAN_POINT('',(153.04999994135,-90.35000005864,1.55)); +#395862 = DIRECTION('',(0.,0.,-1.)); +#395863 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#395864 = ORIENTED_EDGE('',*,*,#395865,.F.); +#395865 = EDGE_CURVE('',#395866,#395857,#395868,.T.); +#395866 = VERTEX_POINT('',#395867); +#395867 = CARTESIAN_POINT('',(153.2,-90.35,1.51)); +#395868 = LINE('',#395869,#395870); +#395869 = CARTESIAN_POINT('',(153.2,-90.35,1.51)); +#395870 = VECTOR('',#395871,1.); +#395871 = DIRECTION('',(0.,0.,1.)); +#395872 = ORIENTED_EDGE('',*,*,#395873,.F.); +#395873 = EDGE_CURVE('',#395834,#395866,#395874,.T.); +#395874 = CIRCLE('',#395875,0.150000058649); +#395875 = AXIS2_PLACEMENT_3D('',#395876,#395877,#395878); +#395876 = CARTESIAN_POINT('',(153.04999994135,-90.35000005864,1.51)); +#395877 = DIRECTION('',(0.,0.,-1.)); +#395878 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#395879 = CYLINDRICAL_SURFACE('',#395880,0.150000058649); +#395880 = AXIS2_PLACEMENT_3D('',#395881,#395882,#395883); +#395881 = CARTESIAN_POINT('',(153.04999994135,-90.35000005864,1.51)); +#395882 = DIRECTION('',(0.,0.,-1.)); +#395883 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#395884 = ADVANCED_FACE('',(#395885),#395910,.T.); +#395885 = FACE_BOUND('',#395886,.T.); +#395886 = EDGE_LOOP('',(#395887,#395888,#395896,#395904)); +#395887 = ORIENTED_EDGE('',*,*,#395865,.T.); +#395888 = ORIENTED_EDGE('',*,*,#395889,.T.); +#395889 = EDGE_CURVE('',#395857,#395890,#395892,.T.); +#395890 = VERTEX_POINT('',#395891); +#395891 = CARTESIAN_POINT('',(153.2,-90.65,1.55)); +#395892 = LINE('',#395893,#395894); +#395893 = CARTESIAN_POINT('',(153.2,-90.35,1.55)); +#395894 = VECTOR('',#395895,1.); +#395895 = DIRECTION('',(0.,-1.,0.)); +#395896 = ORIENTED_EDGE('',*,*,#395897,.F.); +#395897 = EDGE_CURVE('',#395898,#395890,#395900,.T.); +#395898 = VERTEX_POINT('',#395899); +#395899 = CARTESIAN_POINT('',(153.2,-90.65,1.51)); +#395900 = LINE('',#395901,#395902); +#395901 = CARTESIAN_POINT('',(153.2,-90.65,1.51)); +#395902 = VECTOR('',#395903,1.); +#395903 = DIRECTION('',(0.,0.,1.)); +#395904 = ORIENTED_EDGE('',*,*,#395905,.F.); +#395905 = EDGE_CURVE('',#395866,#395898,#395906,.T.); +#395906 = LINE('',#395907,#395908); +#395907 = CARTESIAN_POINT('',(153.2,-90.35,1.51)); +#395908 = VECTOR('',#395909,1.); +#395909 = DIRECTION('',(0.,-1.,0.)); +#395910 = PLANE('',#395911); +#395911 = AXIS2_PLACEMENT_3D('',#395912,#395913,#395914); +#395912 = CARTESIAN_POINT('',(153.2,-90.35,1.51)); +#395913 = DIRECTION('',(1.,0.,-0.)); +#395914 = DIRECTION('',(0.,-1.,0.)); +#395915 = ADVANCED_FACE('',(#395916),#395943,.T.); +#395916 = FACE_BOUND('',#395917,.T.); +#395917 = EDGE_LOOP('',(#395918,#395919,#395928,#395936)); +#395918 = ORIENTED_EDGE('',*,*,#395897,.T.); +#395919 = ORIENTED_EDGE('',*,*,#395920,.T.); +#395920 = EDGE_CURVE('',#395890,#395921,#395923,.T.); +#395921 = VERTEX_POINT('',#395922); +#395922 = CARTESIAN_POINT('',(153.05,-90.8,1.55)); +#395923 = CIRCLE('',#395924,0.150000058649); +#395924 = AXIS2_PLACEMENT_3D('',#395925,#395926,#395927); +#395925 = CARTESIAN_POINT('',(153.04999994135,-90.64999994135,1.55)); +#395926 = DIRECTION('',(0.,0.,-1.)); +#395927 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#395928 = ORIENTED_EDGE('',*,*,#395929,.F.); +#395929 = EDGE_CURVE('',#395930,#395921,#395932,.T.); +#395930 = VERTEX_POINT('',#395931); +#395931 = CARTESIAN_POINT('',(153.05,-90.8,1.51)); +#395932 = LINE('',#395933,#395934); +#395933 = CARTESIAN_POINT('',(153.05,-90.8,1.51)); +#395934 = VECTOR('',#395935,1.); +#395935 = DIRECTION('',(0.,0.,1.)); +#395936 = ORIENTED_EDGE('',*,*,#395937,.F.); +#395937 = EDGE_CURVE('',#395898,#395930,#395938,.T.); +#395938 = CIRCLE('',#395939,0.150000058649); +#395939 = AXIS2_PLACEMENT_3D('',#395940,#395941,#395942); +#395940 = CARTESIAN_POINT('',(153.04999994135,-90.64999994135,1.51)); +#395941 = DIRECTION('',(0.,0.,-1.)); +#395942 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#395943 = CYLINDRICAL_SURFACE('',#395944,0.150000058649); +#395944 = AXIS2_PLACEMENT_3D('',#395945,#395946,#395947); +#395945 = CARTESIAN_POINT('',(153.04999994135,-90.64999994135,1.51)); +#395946 = DIRECTION('',(0.,0.,-1.)); +#395947 = DIRECTION('',(1.,-3.909951247591E-07,0.)); +#395948 = ADVANCED_FACE('',(#395949),#395974,.T.); +#395949 = FACE_BOUND('',#395950,.T.); +#395950 = EDGE_LOOP('',(#395951,#395952,#395960,#395968)); +#395951 = ORIENTED_EDGE('',*,*,#395929,.T.); +#395952 = ORIENTED_EDGE('',*,*,#395953,.T.); +#395953 = EDGE_CURVE('',#395921,#395954,#395956,.T.); +#395954 = VERTEX_POINT('',#395955); +#395955 = CARTESIAN_POINT('',(151.55,-90.8,1.55)); +#395956 = LINE('',#395957,#395958); +#395957 = CARTESIAN_POINT('',(153.05,-90.8,1.55)); +#395958 = VECTOR('',#395959,1.); +#395959 = DIRECTION('',(-1.,0.,0.)); +#395960 = ORIENTED_EDGE('',*,*,#395961,.F.); +#395961 = EDGE_CURVE('',#395962,#395954,#395964,.T.); +#395962 = VERTEX_POINT('',#395963); +#395963 = CARTESIAN_POINT('',(151.55,-90.8,1.51)); +#395964 = LINE('',#395965,#395966); +#395965 = CARTESIAN_POINT('',(151.55,-90.8,1.51)); +#395966 = VECTOR('',#395967,1.); +#395967 = DIRECTION('',(0.,0.,1.)); +#395968 = ORIENTED_EDGE('',*,*,#395969,.F.); +#395969 = EDGE_CURVE('',#395930,#395962,#395970,.T.); +#395970 = LINE('',#395971,#395972); +#395971 = CARTESIAN_POINT('',(153.05,-90.8,1.51)); +#395972 = VECTOR('',#395973,1.); +#395973 = DIRECTION('',(-1.,0.,0.)); +#395974 = PLANE('',#395975); +#395975 = AXIS2_PLACEMENT_3D('',#395976,#395977,#395978); +#395976 = CARTESIAN_POINT('',(153.05,-90.8,1.51)); +#395977 = DIRECTION('',(0.,-1.,0.)); +#395978 = DIRECTION('',(-1.,0.,0.)); +#395979 = ADVANCED_FACE('',(#395980),#396007,.T.); +#395980 = FACE_BOUND('',#395981,.T.); +#395981 = EDGE_LOOP('',(#395982,#395983,#395992,#396000)); +#395982 = ORIENTED_EDGE('',*,*,#395961,.T.); +#395983 = ORIENTED_EDGE('',*,*,#395984,.T.); +#395984 = EDGE_CURVE('',#395954,#395985,#395987,.T.); +#395985 = VERTEX_POINT('',#395986); +#395986 = CARTESIAN_POINT('',(151.4,-90.65,1.55)); +#395987 = CIRCLE('',#395988,0.150000058649); +#395988 = AXIS2_PLACEMENT_3D('',#395989,#395990,#395991); +#395989 = CARTESIAN_POINT('',(151.55000005864,-90.64999994135,1.55)); +#395990 = DIRECTION('',(0.,0.,-1.)); +#395991 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#395992 = ORIENTED_EDGE('',*,*,#395993,.F.); +#395993 = EDGE_CURVE('',#395994,#395985,#395996,.T.); +#395994 = VERTEX_POINT('',#395995); +#395995 = CARTESIAN_POINT('',(151.4,-90.65,1.51)); +#395996 = LINE('',#395997,#395998); +#395997 = CARTESIAN_POINT('',(151.4,-90.65,1.51)); +#395998 = VECTOR('',#395999,1.); +#395999 = DIRECTION('',(0.,0.,1.)); +#396000 = ORIENTED_EDGE('',*,*,#396001,.F.); +#396001 = EDGE_CURVE('',#395962,#395994,#396002,.T.); +#396002 = CIRCLE('',#396003,0.150000058649); +#396003 = AXIS2_PLACEMENT_3D('',#396004,#396005,#396006); +#396004 = CARTESIAN_POINT('',(151.55000005864,-90.64999994135,1.51)); +#396005 = DIRECTION('',(0.,0.,-1.)); +#396006 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#396007 = CYLINDRICAL_SURFACE('',#396008,0.150000058649); +#396008 = AXIS2_PLACEMENT_3D('',#396009,#396010,#396011); +#396009 = CARTESIAN_POINT('',(151.55000005864,-90.64999994135,1.51)); +#396010 = DIRECTION('',(0.,0.,-1.)); +#396011 = DIRECTION('',(-3.909954089759E-07,-1.,-0.)); +#396012 = ADVANCED_FACE('',(#396013),#396029,.T.); +#396013 = FACE_BOUND('',#396014,.T.); +#396014 = EDGE_LOOP('',(#396015,#396016,#396022,#396023)); +#396015 = ORIENTED_EDGE('',*,*,#395993,.T.); +#396016 = ORIENTED_EDGE('',*,*,#396017,.T.); +#396017 = EDGE_CURVE('',#395985,#395785,#396018,.T.); +#396018 = LINE('',#396019,#396020); +#396019 = CARTESIAN_POINT('',(151.4,-90.65,1.55)); +#396020 = VECTOR('',#396021,1.); +#396021 = DIRECTION('',(0.,1.,0.)); +#396022 = ORIENTED_EDGE('',*,*,#395782,.F.); +#396023 = ORIENTED_EDGE('',*,*,#396024,.F.); +#396024 = EDGE_CURVE('',#395994,#395783,#396025,.T.); +#396025 = LINE('',#396026,#396027); +#396026 = CARTESIAN_POINT('',(151.4,-90.65,1.51)); +#396027 = VECTOR('',#396028,1.); +#396028 = DIRECTION('',(0.,1.,0.)); +#396029 = PLANE('',#396030); +#396030 = AXIS2_PLACEMENT_3D('',#396031,#396032,#396033); +#396031 = CARTESIAN_POINT('',(151.4,-90.65,1.51)); +#396032 = DIRECTION('',(-1.,0.,0.)); +#396033 = DIRECTION('',(0.,1.,0.)); +#396034 = ADVANCED_FACE('',(#396035),#396045,.F.); +#396035 = FACE_BOUND('',#396036,.T.); +#396036 = EDGE_LOOP('',(#396037,#396038,#396039,#396040,#396041,#396042, + #396043,#396044)); +#396037 = ORIENTED_EDGE('',*,*,#395809,.T.); +#396038 = ORIENTED_EDGE('',*,*,#395841,.T.); +#396039 = ORIENTED_EDGE('',*,*,#395873,.T.); +#396040 = ORIENTED_EDGE('',*,*,#395905,.T.); +#396041 = ORIENTED_EDGE('',*,*,#395937,.T.); +#396042 = ORIENTED_EDGE('',*,*,#395969,.T.); +#396043 = ORIENTED_EDGE('',*,*,#396001,.T.); +#396044 = ORIENTED_EDGE('',*,*,#396024,.T.); +#396045 = PLANE('',#396046); +#396046 = AXIS2_PLACEMENT_3D('',#396047,#396048,#396049); +#396047 = CARTESIAN_POINT('',(0.,0.,1.51)); +#396048 = DIRECTION('',(0.,0.,1.)); +#396049 = DIRECTION('',(1.,0.,-0.)); +#396050 = ADVANCED_FACE('',(#396051),#396061,.T.); +#396051 = FACE_BOUND('',#396052,.F.); +#396052 = EDGE_LOOP('',(#396053,#396054,#396055,#396056,#396057,#396058, + #396059,#396060)); +#396053 = ORIENTED_EDGE('',*,*,#395792,.T.); +#396054 = ORIENTED_EDGE('',*,*,#395825,.T.); +#396055 = ORIENTED_EDGE('',*,*,#395856,.T.); +#396056 = ORIENTED_EDGE('',*,*,#395889,.T.); +#396057 = ORIENTED_EDGE('',*,*,#395920,.T.); +#396058 = ORIENTED_EDGE('',*,*,#395953,.T.); +#396059 = ORIENTED_EDGE('',*,*,#395984,.T.); +#396060 = ORIENTED_EDGE('',*,*,#396017,.T.); +#396061 = PLANE('',#396062); +#396062 = AXIS2_PLACEMENT_3D('',#396063,#396064,#396065); +#396063 = CARTESIAN_POINT('',(0.,0.,1.55)); +#396064 = DIRECTION('',(0.,0.,1.)); +#396065 = DIRECTION('',(1.,0.,-0.)); +#396066 = MANIFOLD_SOLID_BREP('',#396067); +#396067 = CLOSED_SHELL('',(#396068,#396110,#396141,#396174,#396205, + #396238,#396269,#396302,#396324,#396340)); +#396068 = ADVANCED_FACE('',(#396069),#396105,.T.); +#396069 = FACE_BOUND('',#396070,.T.); +#396070 = EDGE_LOOP('',(#396071,#396081,#396090,#396098)); +#396071 = ORIENTED_EDGE('',*,*,#396072,.T.); +#396072 = EDGE_CURVE('',#396073,#396075,#396077,.T.); +#396073 = VERTEX_POINT('',#396074); +#396074 = CARTESIAN_POINT('',(125.3,-85.825,1.51)); +#396075 = VERTEX_POINT('',#396076); +#396076 = CARTESIAN_POINT('',(125.3,-85.825,1.55)); +#396077 = LINE('',#396078,#396079); +#396078 = CARTESIAN_POINT('',(125.3,-85.825,1.51)); +#396079 = VECTOR('',#396080,1.); +#396080 = DIRECTION('',(0.,0.,1.)); +#396081 = ORIENTED_EDGE('',*,*,#396082,.T.); +#396082 = EDGE_CURVE('',#396075,#396083,#396085,.T.); +#396083 = VERTEX_POINT('',#396084); +#396084 = CARTESIAN_POINT('',(125.55,-85.575,1.55)); +#396085 = CIRCLE('',#396086,0.249998959685); +#396086 = AXIS2_PLACEMENT_3D('',#396087,#396088,#396089); +#396087 = CARTESIAN_POINT('',(125.54999895968,-85.82499895968,1.55)); +#396088 = DIRECTION('',(0.,0.,-1.)); +#396089 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#396090 = ORIENTED_EDGE('',*,*,#396091,.F.); +#396091 = EDGE_CURVE('',#396092,#396083,#396094,.T.); +#396092 = VERTEX_POINT('',#396093); +#396093 = CARTESIAN_POINT('',(125.55,-85.575,1.51)); +#396094 = LINE('',#396095,#396096); +#396095 = CARTESIAN_POINT('',(125.55,-85.575,1.51)); +#396096 = VECTOR('',#396097,1.); +#396097 = DIRECTION('',(0.,0.,1.)); +#396098 = ORIENTED_EDGE('',*,*,#396099,.F.); +#396099 = EDGE_CURVE('',#396073,#396092,#396100,.T.); +#396100 = CIRCLE('',#396101,0.249998959685); +#396101 = AXIS2_PLACEMENT_3D('',#396102,#396103,#396104); +#396102 = CARTESIAN_POINT('',(125.54999895968,-85.82499895968,1.51)); +#396103 = DIRECTION('',(0.,0.,-1.)); +#396104 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#396105 = CYLINDRICAL_SURFACE('',#396106,0.249998959685); +#396106 = AXIS2_PLACEMENT_3D('',#396107,#396108,#396109); +#396107 = CARTESIAN_POINT('',(125.54999895968,-85.82499895968,1.51)); +#396108 = DIRECTION('',(0.,0.,-1.)); +#396109 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#396110 = ADVANCED_FACE('',(#396111),#396136,.T.); +#396111 = FACE_BOUND('',#396112,.T.); +#396112 = EDGE_LOOP('',(#396113,#396114,#396122,#396130)); +#396113 = ORIENTED_EDGE('',*,*,#396091,.T.); +#396114 = ORIENTED_EDGE('',*,*,#396115,.T.); +#396115 = EDGE_CURVE('',#396083,#396116,#396118,.T.); +#396116 = VERTEX_POINT('',#396117); +#396117 = CARTESIAN_POINT('',(126.05,-85.575,1.55)); +#396118 = LINE('',#396119,#396120); +#396119 = CARTESIAN_POINT('',(125.55,-85.575,1.55)); +#396120 = VECTOR('',#396121,1.); +#396121 = DIRECTION('',(1.,0.,0.)); +#396122 = ORIENTED_EDGE('',*,*,#396123,.F.); +#396123 = EDGE_CURVE('',#396124,#396116,#396126,.T.); +#396124 = VERTEX_POINT('',#396125); +#396125 = CARTESIAN_POINT('',(126.05,-85.575,1.51)); +#396126 = LINE('',#396127,#396128); +#396127 = CARTESIAN_POINT('',(126.05,-85.575,1.51)); +#396128 = VECTOR('',#396129,1.); +#396129 = DIRECTION('',(0.,0.,1.)); +#396130 = ORIENTED_EDGE('',*,*,#396131,.F.); +#396131 = EDGE_CURVE('',#396092,#396124,#396132,.T.); +#396132 = LINE('',#396133,#396134); +#396133 = CARTESIAN_POINT('',(125.55,-85.575,1.51)); +#396134 = VECTOR('',#396135,1.); +#396135 = DIRECTION('',(1.,0.,0.)); +#396136 = PLANE('',#396137); +#396137 = AXIS2_PLACEMENT_3D('',#396138,#396139,#396140); +#396138 = CARTESIAN_POINT('',(125.55,-85.575,1.51)); +#396139 = DIRECTION('',(0.,1.,0.)); +#396140 = DIRECTION('',(1.,0.,0.)); +#396141 = ADVANCED_FACE('',(#396142),#396169,.T.); +#396142 = FACE_BOUND('',#396143,.T.); +#396143 = EDGE_LOOP('',(#396144,#396145,#396154,#396162)); +#396144 = ORIENTED_EDGE('',*,*,#396123,.T.); +#396145 = ORIENTED_EDGE('',*,*,#396146,.T.); +#396146 = EDGE_CURVE('',#396116,#396147,#396149,.T.); +#396147 = VERTEX_POINT('',#396148); +#396148 = CARTESIAN_POINT('',(126.3,-85.825,1.55)); +#396149 = CIRCLE('',#396150,0.249998959685); +#396150 = AXIS2_PLACEMENT_3D('',#396151,#396152,#396153); +#396151 = CARTESIAN_POINT('',(126.05000104031,-85.82499895968,1.55)); +#396152 = DIRECTION('',(0.,0.,-1.)); +#396153 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#396154 = ORIENTED_EDGE('',*,*,#396155,.F.); +#396155 = EDGE_CURVE('',#396156,#396147,#396158,.T.); +#396156 = VERTEX_POINT('',#396157); +#396157 = CARTESIAN_POINT('',(126.3,-85.825,1.51)); +#396158 = LINE('',#396159,#396160); +#396159 = CARTESIAN_POINT('',(126.3,-85.825,1.51)); +#396160 = VECTOR('',#396161,1.); +#396161 = DIRECTION('',(0.,0.,1.)); +#396162 = ORIENTED_EDGE('',*,*,#396163,.F.); +#396163 = EDGE_CURVE('',#396124,#396156,#396164,.T.); +#396164 = CIRCLE('',#396165,0.249998959685); +#396165 = AXIS2_PLACEMENT_3D('',#396166,#396167,#396168); +#396166 = CARTESIAN_POINT('',(126.05000104031,-85.82499895968,1.51)); +#396167 = DIRECTION('',(0.,0.,-1.)); +#396168 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#396169 = CYLINDRICAL_SURFACE('',#396170,0.249998959685); +#396170 = AXIS2_PLACEMENT_3D('',#396171,#396172,#396173); +#396171 = CARTESIAN_POINT('',(126.05000104031,-85.82499895968,1.51)); +#396172 = DIRECTION('',(0.,0.,-1.)); +#396173 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#396174 = ADVANCED_FACE('',(#396175),#396200,.T.); +#396175 = FACE_BOUND('',#396176,.T.); +#396176 = EDGE_LOOP('',(#396177,#396178,#396186,#396194)); +#396177 = ORIENTED_EDGE('',*,*,#396155,.T.); +#396178 = ORIENTED_EDGE('',*,*,#396179,.T.); +#396179 = EDGE_CURVE('',#396147,#396180,#396182,.T.); +#396180 = VERTEX_POINT('',#396181); +#396181 = CARTESIAN_POINT('',(126.3,-86.775,1.55)); +#396182 = LINE('',#396183,#396184); +#396183 = CARTESIAN_POINT('',(126.3,-85.825,1.55)); +#396184 = VECTOR('',#396185,1.); +#396185 = DIRECTION('',(0.,-1.,0.)); +#396186 = ORIENTED_EDGE('',*,*,#396187,.F.); +#396187 = EDGE_CURVE('',#396188,#396180,#396190,.T.); +#396188 = VERTEX_POINT('',#396189); +#396189 = CARTESIAN_POINT('',(126.3,-86.775,1.51)); +#396190 = LINE('',#396191,#396192); +#396191 = CARTESIAN_POINT('',(126.3,-86.775,1.51)); +#396192 = VECTOR('',#396193,1.); +#396193 = DIRECTION('',(0.,0.,1.)); +#396194 = ORIENTED_EDGE('',*,*,#396195,.F.); +#396195 = EDGE_CURVE('',#396156,#396188,#396196,.T.); +#396196 = LINE('',#396197,#396198); +#396197 = CARTESIAN_POINT('',(126.3,-85.825,1.51)); +#396198 = VECTOR('',#396199,1.); +#396199 = DIRECTION('',(0.,-1.,0.)); +#396200 = PLANE('',#396201); +#396201 = AXIS2_PLACEMENT_3D('',#396202,#396203,#396204); +#396202 = CARTESIAN_POINT('',(126.3,-85.825,1.51)); +#396203 = DIRECTION('',(1.,0.,-0.)); +#396204 = DIRECTION('',(0.,-1.,0.)); +#396205 = ADVANCED_FACE('',(#396206),#396233,.T.); +#396206 = FACE_BOUND('',#396207,.T.); +#396207 = EDGE_LOOP('',(#396208,#396209,#396218,#396226)); +#396208 = ORIENTED_EDGE('',*,*,#396187,.T.); +#396209 = ORIENTED_EDGE('',*,*,#396210,.T.); +#396210 = EDGE_CURVE('',#396180,#396211,#396213,.T.); +#396211 = VERTEX_POINT('',#396212); +#396212 = CARTESIAN_POINT('',(126.05,-87.025,1.55)); +#396213 = CIRCLE('',#396214,0.249998959685); +#396214 = AXIS2_PLACEMENT_3D('',#396215,#396216,#396217); +#396215 = CARTESIAN_POINT('',(126.05000104031,-86.77500104031,1.55)); +#396216 = DIRECTION('',(0.,0.,-1.)); +#396217 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#396218 = ORIENTED_EDGE('',*,*,#396219,.F.); +#396219 = EDGE_CURVE('',#396220,#396211,#396222,.T.); +#396220 = VERTEX_POINT('',#396221); +#396221 = CARTESIAN_POINT('',(126.05,-87.025,1.51)); +#396222 = LINE('',#396223,#396224); +#396223 = CARTESIAN_POINT('',(126.05,-87.025,1.51)); +#396224 = VECTOR('',#396225,1.); +#396225 = DIRECTION('',(0.,0.,1.)); +#396226 = ORIENTED_EDGE('',*,*,#396227,.F.); +#396227 = EDGE_CURVE('',#396188,#396220,#396228,.T.); +#396228 = CIRCLE('',#396229,0.249998959685); +#396229 = AXIS2_PLACEMENT_3D('',#396230,#396231,#396232); +#396230 = CARTESIAN_POINT('',(126.05000104031,-86.77500104031,1.51)); +#396231 = DIRECTION('',(0.,0.,-1.)); +#396232 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#396233 = CYLINDRICAL_SURFACE('',#396234,0.249998959685); +#396234 = AXIS2_PLACEMENT_3D('',#396235,#396236,#396237); +#396235 = CARTESIAN_POINT('',(126.05000104031,-86.77500104031,1.51)); +#396236 = DIRECTION('',(0.,0.,-1.)); +#396237 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#396238 = ADVANCED_FACE('',(#396239),#396264,.T.); +#396239 = FACE_BOUND('',#396240,.T.); +#396240 = EDGE_LOOP('',(#396241,#396242,#396250,#396258)); +#396241 = ORIENTED_EDGE('',*,*,#396219,.T.); +#396242 = ORIENTED_EDGE('',*,*,#396243,.T.); +#396243 = EDGE_CURVE('',#396211,#396244,#396246,.T.); +#396244 = VERTEX_POINT('',#396245); +#396245 = CARTESIAN_POINT('',(125.55,-87.025,1.55)); +#396246 = LINE('',#396247,#396248); +#396247 = CARTESIAN_POINT('',(126.05,-87.025,1.55)); +#396248 = VECTOR('',#396249,1.); +#396249 = DIRECTION('',(-1.,0.,0.)); +#396250 = ORIENTED_EDGE('',*,*,#396251,.F.); +#396251 = EDGE_CURVE('',#396252,#396244,#396254,.T.); +#396252 = VERTEX_POINT('',#396253); +#396253 = CARTESIAN_POINT('',(125.55,-87.025,1.51)); +#396254 = LINE('',#396255,#396256); +#396255 = CARTESIAN_POINT('',(125.55,-87.025,1.51)); +#396256 = VECTOR('',#396257,1.); +#396257 = DIRECTION('',(0.,0.,1.)); +#396258 = ORIENTED_EDGE('',*,*,#396259,.F.); +#396259 = EDGE_CURVE('',#396220,#396252,#396260,.T.); +#396260 = LINE('',#396261,#396262); +#396261 = CARTESIAN_POINT('',(126.05,-87.025,1.51)); +#396262 = VECTOR('',#396263,1.); +#396263 = DIRECTION('',(-1.,0.,0.)); +#396264 = PLANE('',#396265); +#396265 = AXIS2_PLACEMENT_3D('',#396266,#396267,#396268); +#396266 = CARTESIAN_POINT('',(126.05,-87.025,1.51)); +#396267 = DIRECTION('',(0.,-1.,0.)); +#396268 = DIRECTION('',(-1.,0.,0.)); +#396269 = ADVANCED_FACE('',(#396270),#396297,.T.); +#396270 = FACE_BOUND('',#396271,.T.); +#396271 = EDGE_LOOP('',(#396272,#396273,#396282,#396290)); +#396272 = ORIENTED_EDGE('',*,*,#396251,.T.); +#396273 = ORIENTED_EDGE('',*,*,#396274,.T.); +#396274 = EDGE_CURVE('',#396244,#396275,#396277,.T.); +#396275 = VERTEX_POINT('',#396276); +#396276 = CARTESIAN_POINT('',(125.3,-86.775,1.55)); +#396277 = CIRCLE('',#396278,0.249998959685); +#396278 = AXIS2_PLACEMENT_3D('',#396279,#396280,#396281); +#396279 = CARTESIAN_POINT('',(125.54999895968,-86.77500104031,1.55)); +#396280 = DIRECTION('',(0.,0.,-1.)); +#396281 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#396282 = ORIENTED_EDGE('',*,*,#396283,.F.); +#396283 = EDGE_CURVE('',#396284,#396275,#396286,.T.); +#396284 = VERTEX_POINT('',#396285); +#396285 = CARTESIAN_POINT('',(125.3,-86.775,1.51)); +#396286 = LINE('',#396287,#396288); +#396287 = CARTESIAN_POINT('',(125.3,-86.775,1.51)); +#396288 = VECTOR('',#396289,1.); +#396289 = DIRECTION('',(0.,0.,1.)); +#396290 = ORIENTED_EDGE('',*,*,#396291,.F.); +#396291 = EDGE_CURVE('',#396252,#396284,#396292,.T.); +#396292 = CIRCLE('',#396293,0.249998959685); +#396293 = AXIS2_PLACEMENT_3D('',#396294,#396295,#396296); +#396294 = CARTESIAN_POINT('',(125.54999895968,-86.77500104031,1.51)); +#396295 = DIRECTION('',(0.,0.,-1.)); +#396296 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#396297 = CYLINDRICAL_SURFACE('',#396298,0.249998959685); +#396298 = AXIS2_PLACEMENT_3D('',#396299,#396300,#396301); +#396299 = CARTESIAN_POINT('',(125.54999895968,-86.77500104031,1.51)); +#396300 = DIRECTION('',(0.,0.,-1.)); +#396301 = DIRECTION('',(4.161285837067E-06,-0.999999999991,0.)); +#396302 = ADVANCED_FACE('',(#396303),#396319,.T.); +#396303 = FACE_BOUND('',#396304,.T.); +#396304 = EDGE_LOOP('',(#396305,#396306,#396312,#396313)); +#396305 = ORIENTED_EDGE('',*,*,#396283,.T.); +#396306 = ORIENTED_EDGE('',*,*,#396307,.T.); +#396307 = EDGE_CURVE('',#396275,#396075,#396308,.T.); +#396308 = LINE('',#396309,#396310); +#396309 = CARTESIAN_POINT('',(125.3,-86.775,1.55)); +#396310 = VECTOR('',#396311,1.); +#396311 = DIRECTION('',(0.,1.,0.)); +#396312 = ORIENTED_EDGE('',*,*,#396072,.F.); +#396313 = ORIENTED_EDGE('',*,*,#396314,.F.); +#396314 = EDGE_CURVE('',#396284,#396073,#396315,.T.); +#396315 = LINE('',#396316,#396317); +#396316 = CARTESIAN_POINT('',(125.3,-86.775,1.51)); +#396317 = VECTOR('',#396318,1.); +#396318 = DIRECTION('',(0.,1.,0.)); +#396319 = PLANE('',#396320); +#396320 = AXIS2_PLACEMENT_3D('',#396321,#396322,#396323); +#396321 = CARTESIAN_POINT('',(125.3,-86.775,1.51)); +#396322 = DIRECTION('',(-1.,0.,0.)); +#396323 = DIRECTION('',(0.,1.,0.)); +#396324 = ADVANCED_FACE('',(#396325),#396335,.F.); +#396325 = FACE_BOUND('',#396326,.T.); +#396326 = EDGE_LOOP('',(#396327,#396328,#396329,#396330,#396331,#396332, + #396333,#396334)); +#396327 = ORIENTED_EDGE('',*,*,#396099,.T.); +#396328 = ORIENTED_EDGE('',*,*,#396131,.T.); +#396329 = ORIENTED_EDGE('',*,*,#396163,.T.); +#396330 = ORIENTED_EDGE('',*,*,#396195,.T.); +#396331 = ORIENTED_EDGE('',*,*,#396227,.T.); +#396332 = ORIENTED_EDGE('',*,*,#396259,.T.); +#396333 = ORIENTED_EDGE('',*,*,#396291,.T.); +#396334 = ORIENTED_EDGE('',*,*,#396314,.T.); +#396335 = PLANE('',#396336); +#396336 = AXIS2_PLACEMENT_3D('',#396337,#396338,#396339); +#396337 = CARTESIAN_POINT('',(0.,0.,1.51)); +#396338 = DIRECTION('',(0.,0.,1.)); +#396339 = DIRECTION('',(1.,0.,-0.)); +#396340 = ADVANCED_FACE('',(#396341),#396351,.T.); +#396341 = FACE_BOUND('',#396342,.F.); +#396342 = EDGE_LOOP('',(#396343,#396344,#396345,#396346,#396347,#396348, + #396349,#396350)); +#396343 = ORIENTED_EDGE('',*,*,#396082,.T.); +#396344 = ORIENTED_EDGE('',*,*,#396115,.T.); +#396345 = ORIENTED_EDGE('',*,*,#396146,.T.); +#396346 = ORIENTED_EDGE('',*,*,#396179,.T.); +#396347 = ORIENTED_EDGE('',*,*,#396210,.T.); +#396348 = ORIENTED_EDGE('',*,*,#396243,.T.); +#396349 = ORIENTED_EDGE('',*,*,#396274,.T.); +#396350 = ORIENTED_EDGE('',*,*,#396307,.T.); +#396351 = PLANE('',#396352); +#396352 = AXIS2_PLACEMENT_3D('',#396353,#396354,#396355); +#396353 = CARTESIAN_POINT('',(0.,0.,1.55)); +#396354 = DIRECTION('',(0.,0.,1.)); +#396355 = DIRECTION('',(1.,0.,-0.)); +#396356 = MANIFOLD_SOLID_BREP('',#396357); +#396357 = CLOSED_SHELL('',(#396358,#396400,#396431,#396464,#396495, + #396528,#396559,#396592,#396614,#396630)); +#396358 = ADVANCED_FACE('',(#396359),#396395,.T.); +#396359 = FACE_BOUND('',#396360,.T.); +#396360 = EDGE_LOOP('',(#396361,#396371,#396380,#396388)); +#396361 = ORIENTED_EDGE('',*,*,#396362,.T.); +#396362 = EDGE_CURVE('',#396363,#396365,#396367,.T.); +#396363 = VERTEX_POINT('',#396364); +#396364 = CARTESIAN_POINT('',(129.25,-112.,1.51)); +#396365 = VERTEX_POINT('',#396366); +#396366 = CARTESIAN_POINT('',(129.25,-112.,1.55)); +#396367 = LINE('',#396368,#396369); +#396368 = CARTESIAN_POINT('',(129.25,-112.,1.51)); +#396369 = VECTOR('',#396370,1.); +#396370 = DIRECTION('',(0.,0.,1.)); +#396371 = ORIENTED_EDGE('',*,*,#396372,.T.); +#396372 = EDGE_CURVE('',#396365,#396373,#396375,.T.); +#396373 = VERTEX_POINT('',#396374); +#396374 = CARTESIAN_POINT('',(129.75,-111.5,1.55)); +#396375 = CIRCLE('',#396376,0.500001333575); +#396376 = AXIS2_PLACEMENT_3D('',#396377,#396378,#396379); +#396377 = CARTESIAN_POINT('',(129.75000133357,-112.0000013335,1.55)); +#396378 = DIRECTION('',(0.,0.,-1.)); +#396379 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#396380 = ORIENTED_EDGE('',*,*,#396381,.F.); +#396381 = EDGE_CURVE('',#396382,#396373,#396384,.T.); +#396382 = VERTEX_POINT('',#396383); +#396383 = CARTESIAN_POINT('',(129.75,-111.5,1.51)); +#396384 = LINE('',#396385,#396386); +#396385 = CARTESIAN_POINT('',(129.75,-111.5,1.51)); +#396386 = VECTOR('',#396387,1.); +#396387 = DIRECTION('',(0.,0.,1.)); +#396388 = ORIENTED_EDGE('',*,*,#396389,.F.); +#396389 = EDGE_CURVE('',#396363,#396382,#396390,.T.); +#396390 = CIRCLE('',#396391,0.500001333575); +#396391 = AXIS2_PLACEMENT_3D('',#396392,#396393,#396394); +#396392 = CARTESIAN_POINT('',(129.75000133357,-112.0000013335,1.51)); +#396393 = DIRECTION('',(0.,0.,-1.)); +#396394 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#396395 = CYLINDRICAL_SURFACE('',#396396,0.500001333575); +#396396 = AXIS2_PLACEMENT_3D('',#396397,#396398,#396399); +#396397 = CARTESIAN_POINT('',(129.75000133357,-112.0000013335,1.51)); +#396398 = DIRECTION('',(0.,0.,-1.)); +#396399 = DIRECTION('',(-0.999999999996,2.667139134199E-06,0.)); +#396400 = ADVANCED_FACE('',(#396401),#396426,.T.); +#396401 = FACE_BOUND('',#396402,.T.); +#396402 = EDGE_LOOP('',(#396403,#396404,#396412,#396420)); +#396403 = ORIENTED_EDGE('',*,*,#396381,.T.); +#396404 = ORIENTED_EDGE('',*,*,#396405,.T.); +#396405 = EDGE_CURVE('',#396373,#396406,#396408,.T.); +#396406 = VERTEX_POINT('',#396407); +#396407 = CARTESIAN_POINT('',(130.75,-111.5,1.55)); +#396408 = LINE('',#396409,#396410); +#396409 = CARTESIAN_POINT('',(129.75,-111.5,1.55)); +#396410 = VECTOR('',#396411,1.); +#396411 = DIRECTION('',(1.,0.,0.)); +#396412 = ORIENTED_EDGE('',*,*,#396413,.F.); +#396413 = EDGE_CURVE('',#396414,#396406,#396416,.T.); +#396414 = VERTEX_POINT('',#396415); +#396415 = CARTESIAN_POINT('',(130.75,-111.5,1.51)); +#396416 = LINE('',#396417,#396418); +#396417 = CARTESIAN_POINT('',(130.75,-111.5,1.51)); +#396418 = VECTOR('',#396419,1.); +#396419 = DIRECTION('',(0.,0.,1.)); +#396420 = ORIENTED_EDGE('',*,*,#396421,.F.); +#396421 = EDGE_CURVE('',#396382,#396414,#396422,.T.); +#396422 = LINE('',#396423,#396424); +#396423 = CARTESIAN_POINT('',(129.75,-111.5,1.51)); +#396424 = VECTOR('',#396425,1.); +#396425 = DIRECTION('',(1.,0.,0.)); +#396426 = PLANE('',#396427); +#396427 = AXIS2_PLACEMENT_3D('',#396428,#396429,#396430); +#396428 = CARTESIAN_POINT('',(129.75,-111.5,1.51)); +#396429 = DIRECTION('',(0.,1.,0.)); +#396430 = DIRECTION('',(1.,0.,0.)); +#396431 = ADVANCED_FACE('',(#396432),#396459,.T.); +#396432 = FACE_BOUND('',#396433,.T.); +#396433 = EDGE_LOOP('',(#396434,#396435,#396444,#396452)); +#396434 = ORIENTED_EDGE('',*,*,#396413,.T.); +#396435 = ORIENTED_EDGE('',*,*,#396436,.T.); +#396436 = EDGE_CURVE('',#396406,#396437,#396439,.T.); +#396437 = VERTEX_POINT('',#396438); +#396438 = CARTESIAN_POINT('',(131.25,-112.,1.55)); +#396439 = CIRCLE('',#396440,0.500001333575); +#396440 = AXIS2_PLACEMENT_3D('',#396441,#396442,#396443); +#396441 = CARTESIAN_POINT('',(130.74999866642,-112.0000013335,1.55)); +#396442 = DIRECTION('',(0.,0.,-1.)); +#396443 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#396444 = ORIENTED_EDGE('',*,*,#396445,.F.); +#396445 = EDGE_CURVE('',#396446,#396437,#396448,.T.); +#396446 = VERTEX_POINT('',#396447); +#396447 = CARTESIAN_POINT('',(131.25,-112.,1.51)); +#396448 = LINE('',#396449,#396450); +#396449 = CARTESIAN_POINT('',(131.25,-112.,1.51)); +#396450 = VECTOR('',#396451,1.); +#396451 = DIRECTION('',(0.,0.,1.)); +#396452 = ORIENTED_EDGE('',*,*,#396453,.F.); +#396453 = EDGE_CURVE('',#396414,#396446,#396454,.T.); +#396454 = CIRCLE('',#396455,0.500001333575); +#396455 = AXIS2_PLACEMENT_3D('',#396456,#396457,#396458); +#396456 = CARTESIAN_POINT('',(130.74999866642,-112.0000013335,1.51)); +#396457 = DIRECTION('',(0.,0.,-1.)); +#396458 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#396459 = CYLINDRICAL_SURFACE('',#396460,0.500001333575); +#396460 = AXIS2_PLACEMENT_3D('',#396461,#396462,#396463); +#396461 = CARTESIAN_POINT('',(130.74999866642,-112.0000013335,1.51)); +#396462 = DIRECTION('',(0.,0.,-1.)); +#396463 = DIRECTION('',(2.667139134199E-06,0.999999999996,0.)); +#396464 = ADVANCED_FACE('',(#396465),#396490,.T.); +#396465 = FACE_BOUND('',#396466,.T.); +#396466 = EDGE_LOOP('',(#396467,#396468,#396476,#396484)); +#396467 = ORIENTED_EDGE('',*,*,#396445,.T.); +#396468 = ORIENTED_EDGE('',*,*,#396469,.T.); +#396469 = EDGE_CURVE('',#396437,#396470,#396472,.T.); +#396470 = VERTEX_POINT('',#396471); +#396471 = CARTESIAN_POINT('',(131.25,-113.,1.55)); +#396472 = LINE('',#396473,#396474); +#396473 = CARTESIAN_POINT('',(131.25,-112.,1.55)); +#396474 = VECTOR('',#396475,1.); +#396475 = DIRECTION('',(0.,-1.,0.)); +#396476 = ORIENTED_EDGE('',*,*,#396477,.F.); +#396477 = EDGE_CURVE('',#396478,#396470,#396480,.T.); +#396478 = VERTEX_POINT('',#396479); +#396479 = CARTESIAN_POINT('',(131.25,-113.,1.51)); +#396480 = LINE('',#396481,#396482); +#396481 = CARTESIAN_POINT('',(131.25,-113.,1.51)); +#396482 = VECTOR('',#396483,1.); +#396483 = DIRECTION('',(0.,0.,1.)); +#396484 = ORIENTED_EDGE('',*,*,#396485,.F.); +#396485 = EDGE_CURVE('',#396446,#396478,#396486,.T.); +#396486 = LINE('',#396487,#396488); +#396487 = CARTESIAN_POINT('',(131.25,-112.,1.51)); +#396488 = VECTOR('',#396489,1.); +#396489 = DIRECTION('',(0.,-1.,0.)); +#396490 = PLANE('',#396491); +#396491 = AXIS2_PLACEMENT_3D('',#396492,#396493,#396494); +#396492 = CARTESIAN_POINT('',(131.25,-112.,1.51)); +#396493 = DIRECTION('',(1.,0.,-0.)); +#396494 = DIRECTION('',(0.,-1.,0.)); +#396495 = ADVANCED_FACE('',(#396496),#396523,.T.); +#396496 = FACE_BOUND('',#396497,.T.); +#396497 = EDGE_LOOP('',(#396498,#396499,#396508,#396516)); +#396498 = ORIENTED_EDGE('',*,*,#396477,.T.); +#396499 = ORIENTED_EDGE('',*,*,#396500,.T.); +#396500 = EDGE_CURVE('',#396470,#396501,#396503,.T.); +#396501 = VERTEX_POINT('',#396502); +#396502 = CARTESIAN_POINT('',(130.75,-113.5,1.55)); +#396503 = CIRCLE('',#396504,0.500001333575); +#396504 = AXIS2_PLACEMENT_3D('',#396505,#396506,#396507); +#396505 = CARTESIAN_POINT('',(130.74999866642,-112.9999986664,1.55)); +#396506 = DIRECTION('',(0.,0.,-1.)); +#396507 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#396508 = ORIENTED_EDGE('',*,*,#396509,.F.); +#396509 = EDGE_CURVE('',#396510,#396501,#396512,.T.); +#396510 = VERTEX_POINT('',#396511); +#396511 = CARTESIAN_POINT('',(130.75,-113.5,1.51)); +#396512 = LINE('',#396513,#396514); +#396513 = CARTESIAN_POINT('',(130.75,-113.5,1.51)); +#396514 = VECTOR('',#396515,1.); +#396515 = DIRECTION('',(0.,0.,1.)); +#396516 = ORIENTED_EDGE('',*,*,#396517,.F.); +#396517 = EDGE_CURVE('',#396478,#396510,#396518,.T.); +#396518 = CIRCLE('',#396519,0.500001333575); +#396519 = AXIS2_PLACEMENT_3D('',#396520,#396521,#396522); +#396520 = CARTESIAN_POINT('',(130.74999866642,-112.9999986664,1.51)); +#396521 = DIRECTION('',(0.,0.,-1.)); +#396522 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#396523 = CYLINDRICAL_SURFACE('',#396524,0.500001333575); +#396524 = AXIS2_PLACEMENT_3D('',#396525,#396526,#396527); +#396525 = CARTESIAN_POINT('',(130.74999866642,-112.9999986664,1.51)); +#396526 = DIRECTION('',(0.,0.,-1.)); +#396527 = DIRECTION('',(0.999999999996,-2.667139134199E-06,0.)); +#396528 = ADVANCED_FACE('',(#396529),#396554,.T.); +#396529 = FACE_BOUND('',#396530,.T.); +#396530 = EDGE_LOOP('',(#396531,#396532,#396540,#396548)); +#396531 = ORIENTED_EDGE('',*,*,#396509,.T.); +#396532 = ORIENTED_EDGE('',*,*,#396533,.T.); +#396533 = EDGE_CURVE('',#396501,#396534,#396536,.T.); +#396534 = VERTEX_POINT('',#396535); +#396535 = CARTESIAN_POINT('',(129.75,-113.5,1.55)); +#396536 = LINE('',#396537,#396538); +#396537 = CARTESIAN_POINT('',(130.75,-113.5,1.55)); +#396538 = VECTOR('',#396539,1.); +#396539 = DIRECTION('',(-1.,0.,0.)); +#396540 = ORIENTED_EDGE('',*,*,#396541,.F.); +#396541 = EDGE_CURVE('',#396542,#396534,#396544,.T.); +#396542 = VERTEX_POINT('',#396543); +#396543 = CARTESIAN_POINT('',(129.75,-113.5,1.51)); +#396544 = LINE('',#396545,#396546); +#396545 = CARTESIAN_POINT('',(129.75,-113.5,1.51)); +#396546 = VECTOR('',#396547,1.); +#396547 = DIRECTION('',(0.,0.,1.)); +#396548 = ORIENTED_EDGE('',*,*,#396549,.F.); +#396549 = EDGE_CURVE('',#396510,#396542,#396550,.T.); +#396550 = LINE('',#396551,#396552); +#396551 = CARTESIAN_POINT('',(130.75,-113.5,1.51)); +#396552 = VECTOR('',#396553,1.); +#396553 = DIRECTION('',(-1.,0.,0.)); +#396554 = PLANE('',#396555); +#396555 = AXIS2_PLACEMENT_3D('',#396556,#396557,#396558); +#396556 = CARTESIAN_POINT('',(130.75,-113.5,1.51)); +#396557 = DIRECTION('',(0.,-1.,0.)); +#396558 = DIRECTION('',(-1.,0.,0.)); +#396559 = ADVANCED_FACE('',(#396560),#396587,.T.); +#396560 = FACE_BOUND('',#396561,.T.); +#396561 = EDGE_LOOP('',(#396562,#396563,#396572,#396580)); +#396562 = ORIENTED_EDGE('',*,*,#396541,.T.); +#396563 = ORIENTED_EDGE('',*,*,#396564,.T.); +#396564 = EDGE_CURVE('',#396534,#396565,#396567,.T.); +#396565 = VERTEX_POINT('',#396566); +#396566 = CARTESIAN_POINT('',(129.25,-113.,1.55)); +#396567 = CIRCLE('',#396568,0.500001333575); +#396568 = AXIS2_PLACEMENT_3D('',#396569,#396570,#396571); +#396569 = CARTESIAN_POINT('',(129.75000133357,-112.9999986664,1.55)); +#396570 = DIRECTION('',(0.,0.,-1.)); +#396571 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#396572 = ORIENTED_EDGE('',*,*,#396573,.F.); +#396573 = EDGE_CURVE('',#396574,#396565,#396576,.T.); +#396574 = VERTEX_POINT('',#396575); +#396575 = CARTESIAN_POINT('',(129.25,-113.,1.51)); +#396576 = LINE('',#396577,#396578); +#396577 = CARTESIAN_POINT('',(129.25,-113.,1.51)); +#396578 = VECTOR('',#396579,1.); +#396579 = DIRECTION('',(0.,0.,1.)); +#396580 = ORIENTED_EDGE('',*,*,#396581,.F.); +#396581 = EDGE_CURVE('',#396542,#396574,#396582,.T.); +#396582 = CIRCLE('',#396583,0.500001333575); +#396583 = AXIS2_PLACEMENT_3D('',#396584,#396585,#396586); +#396584 = CARTESIAN_POINT('',(129.75000133357,-112.9999986664,1.51)); +#396585 = DIRECTION('',(0.,0.,-1.)); +#396586 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#396587 = CYLINDRICAL_SURFACE('',#396588,0.500001333575); +#396588 = AXIS2_PLACEMENT_3D('',#396589,#396590,#396591); +#396589 = CARTESIAN_POINT('',(129.75000133357,-112.9999986664,1.51)); +#396590 = DIRECTION('',(0.,0.,-1.)); +#396591 = DIRECTION('',(-2.667139134199E-06,-0.999999999996,-0.)); +#396592 = ADVANCED_FACE('',(#396593),#396609,.T.); +#396593 = FACE_BOUND('',#396594,.T.); +#396594 = EDGE_LOOP('',(#396595,#396596,#396602,#396603)); +#396595 = ORIENTED_EDGE('',*,*,#396573,.T.); +#396596 = ORIENTED_EDGE('',*,*,#396597,.T.); +#396597 = EDGE_CURVE('',#396565,#396365,#396598,.T.); +#396598 = LINE('',#396599,#396600); +#396599 = CARTESIAN_POINT('',(129.25,-113.,1.55)); +#396600 = VECTOR('',#396601,1.); +#396601 = DIRECTION('',(0.,1.,0.)); +#396602 = ORIENTED_EDGE('',*,*,#396362,.F.); +#396603 = ORIENTED_EDGE('',*,*,#396604,.F.); +#396604 = EDGE_CURVE('',#396574,#396363,#396605,.T.); +#396605 = LINE('',#396606,#396607); +#396606 = CARTESIAN_POINT('',(129.25,-113.,1.51)); +#396607 = VECTOR('',#396608,1.); +#396608 = DIRECTION('',(0.,1.,0.)); +#396609 = PLANE('',#396610); +#396610 = AXIS2_PLACEMENT_3D('',#396611,#396612,#396613); +#396611 = CARTESIAN_POINT('',(129.25,-113.,1.51)); +#396612 = DIRECTION('',(-1.,0.,0.)); +#396613 = DIRECTION('',(0.,1.,0.)); +#396614 = ADVANCED_FACE('',(#396615),#396625,.F.); +#396615 = FACE_BOUND('',#396616,.T.); +#396616 = EDGE_LOOP('',(#396617,#396618,#396619,#396620,#396621,#396622, + #396623,#396624)); +#396617 = ORIENTED_EDGE('',*,*,#396389,.T.); +#396618 = ORIENTED_EDGE('',*,*,#396421,.T.); +#396619 = ORIENTED_EDGE('',*,*,#396453,.T.); +#396620 = ORIENTED_EDGE('',*,*,#396485,.T.); +#396621 = ORIENTED_EDGE('',*,*,#396517,.T.); +#396622 = ORIENTED_EDGE('',*,*,#396549,.T.); +#396623 = ORIENTED_EDGE('',*,*,#396581,.T.); +#396624 = ORIENTED_EDGE('',*,*,#396604,.T.); +#396625 = PLANE('',#396626); +#396626 = AXIS2_PLACEMENT_3D('',#396627,#396628,#396629); +#396627 = CARTESIAN_POINT('',(0.,0.,1.51)); +#396628 = DIRECTION('',(0.,0.,1.)); +#396629 = DIRECTION('',(1.,0.,-0.)); +#396630 = ADVANCED_FACE('',(#396631),#396641,.T.); +#396631 = FACE_BOUND('',#396632,.F.); +#396632 = EDGE_LOOP('',(#396633,#396634,#396635,#396636,#396637,#396638, + #396639,#396640)); +#396633 = ORIENTED_EDGE('',*,*,#396372,.T.); +#396634 = ORIENTED_EDGE('',*,*,#396405,.T.); +#396635 = ORIENTED_EDGE('',*,*,#396436,.T.); +#396636 = ORIENTED_EDGE('',*,*,#396469,.T.); +#396637 = ORIENTED_EDGE('',*,*,#396500,.T.); +#396638 = ORIENTED_EDGE('',*,*,#396533,.T.); +#396639 = ORIENTED_EDGE('',*,*,#396564,.T.); +#396640 = ORIENTED_EDGE('',*,*,#396597,.T.); +#396641 = PLANE('',#396642); +#396642 = AXIS2_PLACEMENT_3D('',#396643,#396644,#396645); +#396643 = CARTESIAN_POINT('',(0.,0.,1.55)); +#396644 = DIRECTION('',(0.,0.,1.)); +#396645 = DIRECTION('',(1.,0.,-0.)); +#396646 = MANIFOLD_SOLID_BREP('',#396647); +#396647 = CLOSED_SHELL('',(#396648,#396690,#396721,#396754,#396785, + #396818,#396849,#396882,#396904,#396920)); +#396648 = ADVANCED_FACE('',(#396649),#396685,.T.); +#396649 = FACE_BOUND('',#396650,.T.); +#396650 = EDGE_LOOP('',(#396651,#396661,#396670,#396678)); +#396651 = ORIENTED_EDGE('',*,*,#396652,.T.); +#396652 = EDGE_CURVE('',#396653,#396655,#396657,.T.); +#396653 = VERTEX_POINT('',#396654); +#396654 = CARTESIAN_POINT('',(125.21,-87.715,1.51)); +#396655 = VERTEX_POINT('',#396656); +#396656 = CARTESIAN_POINT('',(125.21,-87.715,1.55)); +#396657 = LINE('',#396658,#396659); +#396658 = CARTESIAN_POINT('',(125.21,-87.715,1.51)); +#396659 = VECTOR('',#396660,1.); +#396660 = DIRECTION('',(0.,0.,1.)); +#396661 = ORIENTED_EDGE('',*,*,#396662,.T.); +#396662 = EDGE_CURVE('',#396655,#396663,#396665,.T.); +#396663 = VERTEX_POINT('',#396664); +#396664 = CARTESIAN_POINT('',(125.345,-87.58,1.55)); +#396665 = CIRCLE('',#396666,0.135001418495); +#396666 = AXIS2_PLACEMENT_3D('',#396667,#396668,#396669); +#396667 = CARTESIAN_POINT('',(125.34500141848,-87.71500141848,1.55)); +#396668 = DIRECTION('',(0.,0.,-1.)); +#396669 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#396670 = ORIENTED_EDGE('',*,*,#396671,.F.); +#396671 = EDGE_CURVE('',#396672,#396663,#396674,.T.); +#396672 = VERTEX_POINT('',#396673); +#396673 = CARTESIAN_POINT('',(125.345,-87.58,1.51)); +#396674 = LINE('',#396675,#396676); +#396675 = CARTESIAN_POINT('',(125.345,-87.58,1.51)); +#396676 = VECTOR('',#396677,1.); +#396677 = DIRECTION('',(0.,0.,1.)); +#396678 = ORIENTED_EDGE('',*,*,#396679,.F.); +#396679 = EDGE_CURVE('',#396653,#396672,#396680,.T.); +#396680 = CIRCLE('',#396681,0.135001418495); +#396681 = AXIS2_PLACEMENT_3D('',#396682,#396683,#396684); +#396682 = CARTESIAN_POINT('',(125.34500141848,-87.71500141848,1.51)); +#396683 = DIRECTION('',(0.,0.,-1.)); +#396684 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#396685 = CYLINDRICAL_SURFACE('',#396686,0.135001418495); +#396686 = AXIS2_PLACEMENT_3D('',#396687,#396688,#396689); +#396687 = CARTESIAN_POINT('',(125.34500141848,-87.71500141848,1.51)); +#396688 = DIRECTION('',(0.,0.,-1.)); +#396689 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#396690 = ADVANCED_FACE('',(#396691),#396716,.T.); +#396691 = FACE_BOUND('',#396692,.T.); +#396692 = EDGE_LOOP('',(#396693,#396694,#396702,#396710)); +#396693 = ORIENTED_EDGE('',*,*,#396671,.T.); +#396694 = ORIENTED_EDGE('',*,*,#396695,.T.); +#396695 = EDGE_CURVE('',#396663,#396696,#396698,.T.); +#396696 = VERTEX_POINT('',#396697); +#396697 = CARTESIAN_POINT('',(125.615,-87.58,1.55)); +#396698 = LINE('',#396699,#396700); +#396699 = CARTESIAN_POINT('',(125.345,-87.58,1.55)); +#396700 = VECTOR('',#396701,1.); +#396701 = DIRECTION('',(1.,0.,0.)); +#396702 = ORIENTED_EDGE('',*,*,#396703,.F.); +#396703 = EDGE_CURVE('',#396704,#396696,#396706,.T.); +#396704 = VERTEX_POINT('',#396705); +#396705 = CARTESIAN_POINT('',(125.615,-87.58,1.51)); +#396706 = LINE('',#396707,#396708); +#396707 = CARTESIAN_POINT('',(125.615,-87.58,1.51)); +#396708 = VECTOR('',#396709,1.); +#396709 = DIRECTION('',(0.,0.,1.)); +#396710 = ORIENTED_EDGE('',*,*,#396711,.F.); +#396711 = EDGE_CURVE('',#396672,#396704,#396712,.T.); +#396712 = LINE('',#396713,#396714); +#396713 = CARTESIAN_POINT('',(125.345,-87.58,1.51)); +#396714 = VECTOR('',#396715,1.); +#396715 = DIRECTION('',(1.,0.,0.)); +#396716 = PLANE('',#396717); +#396717 = AXIS2_PLACEMENT_3D('',#396718,#396719,#396720); +#396718 = CARTESIAN_POINT('',(125.345,-87.58,1.51)); +#396719 = DIRECTION('',(0.,1.,0.)); +#396720 = DIRECTION('',(1.,0.,0.)); +#396721 = ADVANCED_FACE('',(#396722),#396749,.T.); +#396722 = FACE_BOUND('',#396723,.T.); +#396723 = EDGE_LOOP('',(#396724,#396725,#396734,#396742)); +#396724 = ORIENTED_EDGE('',*,*,#396703,.T.); +#396725 = ORIENTED_EDGE('',*,*,#396726,.T.); +#396726 = EDGE_CURVE('',#396696,#396727,#396729,.T.); +#396727 = VERTEX_POINT('',#396728); +#396728 = CARTESIAN_POINT('',(125.75,-87.715,1.55)); +#396729 = CIRCLE('',#396730,0.135001418495); +#396730 = AXIS2_PLACEMENT_3D('',#396731,#396732,#396733); +#396731 = CARTESIAN_POINT('',(125.61499858151,-87.71500141848,1.55)); +#396732 = DIRECTION('',(0.,0.,-1.)); +#396733 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#396734 = ORIENTED_EDGE('',*,*,#396735,.F.); +#396735 = EDGE_CURVE('',#396736,#396727,#396738,.T.); +#396736 = VERTEX_POINT('',#396737); +#396737 = CARTESIAN_POINT('',(125.75,-87.715,1.51)); +#396738 = LINE('',#396739,#396740); +#396739 = CARTESIAN_POINT('',(125.75,-87.715,1.51)); +#396740 = VECTOR('',#396741,1.); +#396741 = DIRECTION('',(0.,0.,1.)); +#396742 = ORIENTED_EDGE('',*,*,#396743,.F.); +#396743 = EDGE_CURVE('',#396704,#396736,#396744,.T.); +#396744 = CIRCLE('',#396745,0.135001418495); +#396745 = AXIS2_PLACEMENT_3D('',#396746,#396747,#396748); +#396746 = CARTESIAN_POINT('',(125.61499858151,-87.71500141848,1.51)); +#396747 = DIRECTION('',(0.,0.,-1.)); +#396748 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#396749 = CYLINDRICAL_SURFACE('',#396750,0.135001418495); +#396750 = AXIS2_PLACEMENT_3D('',#396751,#396752,#396753); +#396751 = CARTESIAN_POINT('',(125.61499858151,-87.71500141848,1.51)); +#396752 = DIRECTION('',(0.,0.,-1.)); +#396753 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#396754 = ADVANCED_FACE('',(#396755),#396780,.T.); +#396755 = FACE_BOUND('',#396756,.T.); +#396756 = EDGE_LOOP('',(#396757,#396758,#396766,#396774)); +#396757 = ORIENTED_EDGE('',*,*,#396735,.T.); +#396758 = ORIENTED_EDGE('',*,*,#396759,.T.); +#396759 = EDGE_CURVE('',#396727,#396760,#396762,.T.); +#396760 = VERTEX_POINT('',#396761); +#396761 = CARTESIAN_POINT('',(125.75,-88.085,1.55)); +#396762 = LINE('',#396763,#396764); +#396763 = CARTESIAN_POINT('',(125.75,-87.715,1.55)); +#396764 = VECTOR('',#396765,1.); +#396765 = DIRECTION('',(0.,-1.,0.)); +#396766 = ORIENTED_EDGE('',*,*,#396767,.F.); +#396767 = EDGE_CURVE('',#396768,#396760,#396770,.T.); +#396768 = VERTEX_POINT('',#396769); +#396769 = CARTESIAN_POINT('',(125.75,-88.085,1.51)); +#396770 = LINE('',#396771,#396772); +#396771 = CARTESIAN_POINT('',(125.75,-88.085,1.51)); +#396772 = VECTOR('',#396773,1.); +#396773 = DIRECTION('',(0.,0.,1.)); +#396774 = ORIENTED_EDGE('',*,*,#396775,.F.); +#396775 = EDGE_CURVE('',#396736,#396768,#396776,.T.); +#396776 = LINE('',#396777,#396778); +#396777 = CARTESIAN_POINT('',(125.75,-87.715,1.51)); +#396778 = VECTOR('',#396779,1.); +#396779 = DIRECTION('',(0.,-1.,0.)); +#396780 = PLANE('',#396781); +#396781 = AXIS2_PLACEMENT_3D('',#396782,#396783,#396784); +#396782 = CARTESIAN_POINT('',(125.75,-87.715,1.51)); +#396783 = DIRECTION('',(1.,0.,-0.)); +#396784 = DIRECTION('',(0.,-1.,0.)); +#396785 = ADVANCED_FACE('',(#396786),#396813,.T.); +#396786 = FACE_BOUND('',#396787,.T.); +#396787 = EDGE_LOOP('',(#396788,#396789,#396798,#396806)); +#396788 = ORIENTED_EDGE('',*,*,#396767,.T.); +#396789 = ORIENTED_EDGE('',*,*,#396790,.T.); +#396790 = EDGE_CURVE('',#396760,#396791,#396793,.T.); +#396791 = VERTEX_POINT('',#396792); +#396792 = CARTESIAN_POINT('',(125.615,-88.22,1.55)); +#396793 = CIRCLE('',#396794,0.135001418495); +#396794 = AXIS2_PLACEMENT_3D('',#396795,#396796,#396797); +#396795 = CARTESIAN_POINT('',(125.61499858151,-88.08499858151,1.55)); +#396796 = DIRECTION('',(0.,0.,-1.)); +#396797 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#396798 = ORIENTED_EDGE('',*,*,#396799,.F.); +#396799 = EDGE_CURVE('',#396800,#396791,#396802,.T.); +#396800 = VERTEX_POINT('',#396801); +#396801 = CARTESIAN_POINT('',(125.615,-88.22,1.51)); +#396802 = LINE('',#396803,#396804); +#396803 = CARTESIAN_POINT('',(125.615,-88.22,1.51)); +#396804 = VECTOR('',#396805,1.); +#396805 = DIRECTION('',(0.,0.,1.)); +#396806 = ORIENTED_EDGE('',*,*,#396807,.F.); +#396807 = EDGE_CURVE('',#396768,#396800,#396808,.T.); +#396808 = CIRCLE('',#396809,0.135001418495); +#396809 = AXIS2_PLACEMENT_3D('',#396810,#396811,#396812); +#396810 = CARTESIAN_POINT('',(125.61499858151,-88.08499858151,1.51)); +#396811 = DIRECTION('',(0.,0.,-1.)); +#396812 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#396813 = CYLINDRICAL_SURFACE('',#396814,0.135001418495); +#396814 = AXIS2_PLACEMENT_3D('',#396815,#396816,#396817); +#396815 = CARTESIAN_POINT('',(125.61499858151,-88.08499858151,1.51)); +#396816 = DIRECTION('',(0.,0.,-1.)); +#396817 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#396818 = ADVANCED_FACE('',(#396819),#396844,.T.); +#396819 = FACE_BOUND('',#396820,.T.); +#396820 = EDGE_LOOP('',(#396821,#396822,#396830,#396838)); +#396821 = ORIENTED_EDGE('',*,*,#396799,.T.); +#396822 = ORIENTED_EDGE('',*,*,#396823,.T.); +#396823 = EDGE_CURVE('',#396791,#396824,#396826,.T.); +#396824 = VERTEX_POINT('',#396825); +#396825 = CARTESIAN_POINT('',(125.345,-88.22,1.55)); +#396826 = LINE('',#396827,#396828); +#396827 = CARTESIAN_POINT('',(125.615,-88.22,1.55)); +#396828 = VECTOR('',#396829,1.); +#396829 = DIRECTION('',(-1.,0.,0.)); +#396830 = ORIENTED_EDGE('',*,*,#396831,.F.); +#396831 = EDGE_CURVE('',#396832,#396824,#396834,.T.); +#396832 = VERTEX_POINT('',#396833); +#396833 = CARTESIAN_POINT('',(125.345,-88.22,1.51)); +#396834 = LINE('',#396835,#396836); +#396835 = CARTESIAN_POINT('',(125.345,-88.22,1.51)); +#396836 = VECTOR('',#396837,1.); +#396837 = DIRECTION('',(0.,0.,1.)); +#396838 = ORIENTED_EDGE('',*,*,#396839,.F.); +#396839 = EDGE_CURVE('',#396800,#396832,#396840,.T.); +#396840 = LINE('',#396841,#396842); +#396841 = CARTESIAN_POINT('',(125.615,-88.22,1.51)); +#396842 = VECTOR('',#396843,1.); +#396843 = DIRECTION('',(-1.,0.,0.)); +#396844 = PLANE('',#396845); +#396845 = AXIS2_PLACEMENT_3D('',#396846,#396847,#396848); +#396846 = CARTESIAN_POINT('',(125.615,-88.22,1.51)); +#396847 = DIRECTION('',(0.,-1.,0.)); +#396848 = DIRECTION('',(-1.,0.,0.)); +#396849 = ADVANCED_FACE('',(#396850),#396877,.T.); +#396850 = FACE_BOUND('',#396851,.T.); +#396851 = EDGE_LOOP('',(#396852,#396853,#396862,#396870)); +#396852 = ORIENTED_EDGE('',*,*,#396831,.T.); +#396853 = ORIENTED_EDGE('',*,*,#396854,.T.); +#396854 = EDGE_CURVE('',#396824,#396855,#396857,.T.); +#396855 = VERTEX_POINT('',#396856); +#396856 = CARTESIAN_POINT('',(125.21,-88.085,1.55)); +#396857 = CIRCLE('',#396858,0.135001418495); +#396858 = AXIS2_PLACEMENT_3D('',#396859,#396860,#396861); +#396859 = CARTESIAN_POINT('',(125.34500141848,-88.08499858151,1.55)); +#396860 = DIRECTION('',(0.,0.,-1.)); +#396861 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#396862 = ORIENTED_EDGE('',*,*,#396863,.F.); +#396863 = EDGE_CURVE('',#396864,#396855,#396866,.T.); +#396864 = VERTEX_POINT('',#396865); +#396865 = CARTESIAN_POINT('',(125.21,-88.085,1.51)); +#396866 = LINE('',#396867,#396868); +#396867 = CARTESIAN_POINT('',(125.21,-88.085,1.51)); +#396868 = VECTOR('',#396869,1.); +#396869 = DIRECTION('',(0.,0.,1.)); +#396870 = ORIENTED_EDGE('',*,*,#396871,.F.); +#396871 = EDGE_CURVE('',#396832,#396864,#396872,.T.); +#396872 = CIRCLE('',#396873,0.135001418495); +#396873 = AXIS2_PLACEMENT_3D('',#396874,#396875,#396876); +#396874 = CARTESIAN_POINT('',(125.34500141848,-88.08499858151,1.51)); +#396875 = DIRECTION('',(0.,0.,-1.)); +#396876 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#396877 = CYLINDRICAL_SURFACE('',#396878,0.135001418495); +#396878 = AXIS2_PLACEMENT_3D('',#396879,#396880,#396881); +#396879 = CARTESIAN_POINT('',(125.34500141848,-88.08499858151,1.51)); +#396880 = DIRECTION('',(0.,0.,-1.)); +#396881 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#396882 = ADVANCED_FACE('',(#396883),#396899,.T.); +#396883 = FACE_BOUND('',#396884,.T.); +#396884 = EDGE_LOOP('',(#396885,#396886,#396892,#396893)); +#396885 = ORIENTED_EDGE('',*,*,#396863,.T.); +#396886 = ORIENTED_EDGE('',*,*,#396887,.T.); +#396887 = EDGE_CURVE('',#396855,#396655,#396888,.T.); +#396888 = LINE('',#396889,#396890); +#396889 = CARTESIAN_POINT('',(125.21,-88.085,1.55)); +#396890 = VECTOR('',#396891,1.); +#396891 = DIRECTION('',(0.,1.,0.)); +#396892 = ORIENTED_EDGE('',*,*,#396652,.F.); +#396893 = ORIENTED_EDGE('',*,*,#396894,.F.); +#396894 = EDGE_CURVE('',#396864,#396653,#396895,.T.); +#396895 = LINE('',#396896,#396897); +#396896 = CARTESIAN_POINT('',(125.21,-88.085,1.51)); +#396897 = VECTOR('',#396898,1.); +#396898 = DIRECTION('',(0.,1.,0.)); +#396899 = PLANE('',#396900); +#396900 = AXIS2_PLACEMENT_3D('',#396901,#396902,#396903); +#396901 = CARTESIAN_POINT('',(125.21,-88.085,1.51)); +#396902 = DIRECTION('',(-1.,0.,0.)); +#396903 = DIRECTION('',(0.,1.,0.)); +#396904 = ADVANCED_FACE('',(#396905),#396915,.F.); +#396905 = FACE_BOUND('',#396906,.T.); +#396906 = EDGE_LOOP('',(#396907,#396908,#396909,#396910,#396911,#396912, + #396913,#396914)); +#396907 = ORIENTED_EDGE('',*,*,#396679,.T.); +#396908 = ORIENTED_EDGE('',*,*,#396711,.T.); +#396909 = ORIENTED_EDGE('',*,*,#396743,.T.); +#396910 = ORIENTED_EDGE('',*,*,#396775,.T.); +#396911 = ORIENTED_EDGE('',*,*,#396807,.T.); +#396912 = ORIENTED_EDGE('',*,*,#396839,.T.); +#396913 = ORIENTED_EDGE('',*,*,#396871,.T.); +#396914 = ORIENTED_EDGE('',*,*,#396894,.T.); +#396915 = PLANE('',#396916); +#396916 = AXIS2_PLACEMENT_3D('',#396917,#396918,#396919); +#396917 = CARTESIAN_POINT('',(0.,0.,1.51)); +#396918 = DIRECTION('',(0.,0.,1.)); +#396919 = DIRECTION('',(1.,0.,-0.)); +#396920 = ADVANCED_FACE('',(#396921),#396931,.T.); +#396921 = FACE_BOUND('',#396922,.F.); +#396922 = EDGE_LOOP('',(#396923,#396924,#396925,#396926,#396927,#396928, + #396929,#396930)); +#396923 = ORIENTED_EDGE('',*,*,#396662,.T.); +#396924 = ORIENTED_EDGE('',*,*,#396695,.T.); +#396925 = ORIENTED_EDGE('',*,*,#396726,.T.); +#396926 = ORIENTED_EDGE('',*,*,#396759,.T.); +#396927 = ORIENTED_EDGE('',*,*,#396790,.T.); +#396928 = ORIENTED_EDGE('',*,*,#396823,.T.); +#396929 = ORIENTED_EDGE('',*,*,#396854,.T.); +#396930 = ORIENTED_EDGE('',*,*,#396887,.T.); +#396931 = PLANE('',#396932); +#396932 = AXIS2_PLACEMENT_3D('',#396933,#396934,#396935); +#396933 = CARTESIAN_POINT('',(0.,0.,1.55)); +#396934 = DIRECTION('',(0.,0.,1.)); +#396935 = DIRECTION('',(1.,0.,-0.)); +#396936 = MANIFOLD_SOLID_BREP('',#396937); +#396937 = CLOSED_SHELL('',(#396938,#396980,#397011,#397044,#397075, + #397108,#397139,#397172,#397194,#397210)); +#396938 = ADVANCED_FACE('',(#396939),#396975,.T.); +#396939 = FACE_BOUND('',#396940,.T.); +#396940 = EDGE_LOOP('',(#396941,#396951,#396960,#396968)); +#396941 = ORIENTED_EDGE('',*,*,#396942,.T.); +#396942 = EDGE_CURVE('',#396943,#396945,#396947,.T.); +#396943 = VERTEX_POINT('',#396944); +#396944 = CARTESIAN_POINT('',(148.19,-93.34,1.51)); +#396945 = VERTEX_POINT('',#396946); +#396946 = CARTESIAN_POINT('',(148.19,-93.34,1.55)); +#396947 = LINE('',#396948,#396949); +#396948 = CARTESIAN_POINT('',(148.19,-93.34,1.51)); +#396949 = VECTOR('',#396950,1.); +#396950 = DIRECTION('',(0.,0.,1.)); +#396951 = ORIENTED_EDGE('',*,*,#396952,.T.); +#396952 = EDGE_CURVE('',#396945,#396953,#396955,.T.); +#396953 = VERTEX_POINT('',#396954); +#396954 = CARTESIAN_POINT('',(148.33,-93.2,1.55)); +#396955 = CIRCLE('',#396956,0.139999827125); +#396956 = AXIS2_PLACEMENT_3D('',#396957,#396958,#396959); +#396957 = CARTESIAN_POINT('',(148.32999982712,-93.33999982712,1.55)); +#396958 = DIRECTION('',(0.,0.,-1.)); +#396959 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#396960 = ORIENTED_EDGE('',*,*,#396961,.F.); +#396961 = EDGE_CURVE('',#396962,#396953,#396964,.T.); +#396962 = VERTEX_POINT('',#396963); +#396963 = CARTESIAN_POINT('',(148.33,-93.2,1.51)); +#396964 = LINE('',#396965,#396966); +#396965 = CARTESIAN_POINT('',(148.33,-93.2,1.51)); +#396966 = VECTOR('',#396967,1.); +#396967 = DIRECTION('',(0.,0.,1.)); +#396968 = ORIENTED_EDGE('',*,*,#396969,.F.); +#396969 = EDGE_CURVE('',#396943,#396962,#396970,.T.); +#396970 = CIRCLE('',#396971,0.139999827125); +#396971 = AXIS2_PLACEMENT_3D('',#396972,#396973,#396974); +#396972 = CARTESIAN_POINT('',(148.32999982712,-93.33999982712,1.51)); +#396973 = DIRECTION('',(0.,0.,-1.)); +#396974 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#396975 = CYLINDRICAL_SURFACE('',#396976,0.139999827125); +#396976 = AXIS2_PLACEMENT_3D('',#396977,#396978,#396979); +#396977 = CARTESIAN_POINT('',(148.32999982712,-93.33999982712,1.51)); +#396978 = DIRECTION('',(0.,0.,-1.)); +#396979 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#396980 = ADVANCED_FACE('',(#396981),#397006,.T.); +#396981 = FACE_BOUND('',#396982,.T.); +#396982 = EDGE_LOOP('',(#396983,#396984,#396992,#397000)); +#396983 = ORIENTED_EDGE('',*,*,#396961,.T.); +#396984 = ORIENTED_EDGE('',*,*,#396985,.T.); +#396985 = EDGE_CURVE('',#396953,#396986,#396988,.T.); +#396986 = VERTEX_POINT('',#396987); +#396987 = CARTESIAN_POINT('',(148.67,-93.2,1.55)); +#396988 = LINE('',#396989,#396990); +#396989 = CARTESIAN_POINT('',(148.33,-93.2,1.55)); +#396990 = VECTOR('',#396991,1.); +#396991 = DIRECTION('',(1.,0.,0.)); +#396992 = ORIENTED_EDGE('',*,*,#396993,.F.); +#396993 = EDGE_CURVE('',#396994,#396986,#396996,.T.); +#396994 = VERTEX_POINT('',#396995); +#396995 = CARTESIAN_POINT('',(148.67,-93.2,1.51)); +#396996 = LINE('',#396997,#396998); +#396997 = CARTESIAN_POINT('',(148.67,-93.2,1.51)); +#396998 = VECTOR('',#396999,1.); +#396999 = DIRECTION('',(0.,0.,1.)); +#397000 = ORIENTED_EDGE('',*,*,#397001,.F.); +#397001 = EDGE_CURVE('',#396962,#396994,#397002,.T.); +#397002 = LINE('',#397003,#397004); +#397003 = CARTESIAN_POINT('',(148.33,-93.2,1.51)); +#397004 = VECTOR('',#397005,1.); +#397005 = DIRECTION('',(1.,0.,0.)); +#397006 = PLANE('',#397007); +#397007 = AXIS2_PLACEMENT_3D('',#397008,#397009,#397010); +#397008 = CARTESIAN_POINT('',(148.33,-93.2,1.51)); +#397009 = DIRECTION('',(0.,1.,0.)); +#397010 = DIRECTION('',(1.,0.,0.)); +#397011 = ADVANCED_FACE('',(#397012),#397039,.T.); +#397012 = FACE_BOUND('',#397013,.T.); +#397013 = EDGE_LOOP('',(#397014,#397015,#397024,#397032)); +#397014 = ORIENTED_EDGE('',*,*,#396993,.T.); +#397015 = ORIENTED_EDGE('',*,*,#397016,.T.); +#397016 = EDGE_CURVE('',#396986,#397017,#397019,.T.); +#397017 = VERTEX_POINT('',#397018); +#397018 = CARTESIAN_POINT('',(148.81,-93.34,1.55)); +#397019 = CIRCLE('',#397020,0.139999827125); +#397020 = AXIS2_PLACEMENT_3D('',#397021,#397022,#397023); +#397021 = CARTESIAN_POINT('',(148.67000017287,-93.33999982712,1.55)); +#397022 = DIRECTION('',(0.,0.,-1.)); +#397023 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#397024 = ORIENTED_EDGE('',*,*,#397025,.F.); +#397025 = EDGE_CURVE('',#397026,#397017,#397028,.T.); +#397026 = VERTEX_POINT('',#397027); +#397027 = CARTESIAN_POINT('',(148.81,-93.34,1.51)); +#397028 = LINE('',#397029,#397030); +#397029 = CARTESIAN_POINT('',(148.81,-93.34,1.51)); +#397030 = VECTOR('',#397031,1.); +#397031 = DIRECTION('',(0.,0.,1.)); +#397032 = ORIENTED_EDGE('',*,*,#397033,.F.); +#397033 = EDGE_CURVE('',#396994,#397026,#397034,.T.); +#397034 = CIRCLE('',#397035,0.139999827125); +#397035 = AXIS2_PLACEMENT_3D('',#397036,#397037,#397038); +#397036 = CARTESIAN_POINT('',(148.67000017287,-93.33999982712,1.51)); +#397037 = DIRECTION('',(0.,0.,-1.)); +#397038 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#397039 = CYLINDRICAL_SURFACE('',#397040,0.139999827125); +#397040 = AXIS2_PLACEMENT_3D('',#397041,#397042,#397043); +#397041 = CARTESIAN_POINT('',(148.67000017287,-93.33999982712,1.51)); +#397042 = DIRECTION('',(0.,0.,-1.)); +#397043 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#397044 = ADVANCED_FACE('',(#397045),#397070,.T.); +#397045 = FACE_BOUND('',#397046,.T.); +#397046 = EDGE_LOOP('',(#397047,#397048,#397056,#397064)); +#397047 = ORIENTED_EDGE('',*,*,#397025,.T.); +#397048 = ORIENTED_EDGE('',*,*,#397049,.T.); +#397049 = EDGE_CURVE('',#397017,#397050,#397052,.T.); +#397050 = VERTEX_POINT('',#397051); +#397051 = CARTESIAN_POINT('',(148.81,-93.62,1.55)); +#397052 = LINE('',#397053,#397054); +#397053 = CARTESIAN_POINT('',(148.81,-93.34,1.55)); +#397054 = VECTOR('',#397055,1.); +#397055 = DIRECTION('',(0.,-1.,0.)); +#397056 = ORIENTED_EDGE('',*,*,#397057,.F.); +#397057 = EDGE_CURVE('',#397058,#397050,#397060,.T.); +#397058 = VERTEX_POINT('',#397059); +#397059 = CARTESIAN_POINT('',(148.81,-93.62,1.51)); +#397060 = LINE('',#397061,#397062); +#397061 = CARTESIAN_POINT('',(148.81,-93.62,1.51)); +#397062 = VECTOR('',#397063,1.); +#397063 = DIRECTION('',(0.,0.,1.)); +#397064 = ORIENTED_EDGE('',*,*,#397065,.F.); +#397065 = EDGE_CURVE('',#397026,#397058,#397066,.T.); +#397066 = LINE('',#397067,#397068); +#397067 = CARTESIAN_POINT('',(148.81,-93.34,1.51)); +#397068 = VECTOR('',#397069,1.); +#397069 = DIRECTION('',(0.,-1.,0.)); +#397070 = PLANE('',#397071); +#397071 = AXIS2_PLACEMENT_3D('',#397072,#397073,#397074); +#397072 = CARTESIAN_POINT('',(148.81,-93.34,1.51)); +#397073 = DIRECTION('',(1.,0.,-0.)); +#397074 = DIRECTION('',(0.,-1.,0.)); +#397075 = ADVANCED_FACE('',(#397076),#397103,.T.); +#397076 = FACE_BOUND('',#397077,.T.); +#397077 = EDGE_LOOP('',(#397078,#397079,#397088,#397096)); +#397078 = ORIENTED_EDGE('',*,*,#397057,.T.); +#397079 = ORIENTED_EDGE('',*,*,#397080,.T.); +#397080 = EDGE_CURVE('',#397050,#397081,#397083,.T.); +#397081 = VERTEX_POINT('',#397082); +#397082 = CARTESIAN_POINT('',(148.67,-93.76,1.55)); +#397083 = CIRCLE('',#397084,0.139999827125); +#397084 = AXIS2_PLACEMENT_3D('',#397085,#397086,#397087); +#397085 = CARTESIAN_POINT('',(148.67000017287,-93.62000017287,1.55)); +#397086 = DIRECTION('',(0.,0.,-1.)); +#397087 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#397088 = ORIENTED_EDGE('',*,*,#397089,.F.); +#397089 = EDGE_CURVE('',#397090,#397081,#397092,.T.); +#397090 = VERTEX_POINT('',#397091); +#397091 = CARTESIAN_POINT('',(148.67,-93.76,1.51)); +#397092 = LINE('',#397093,#397094); +#397093 = CARTESIAN_POINT('',(148.67,-93.76,1.51)); +#397094 = VECTOR('',#397095,1.); +#397095 = DIRECTION('',(0.,0.,1.)); +#397096 = ORIENTED_EDGE('',*,*,#397097,.F.); +#397097 = EDGE_CURVE('',#397058,#397090,#397098,.T.); +#397098 = CIRCLE('',#397099,0.139999827125); +#397099 = AXIS2_PLACEMENT_3D('',#397100,#397101,#397102); +#397100 = CARTESIAN_POINT('',(148.67000017287,-93.62000017287,1.51)); +#397101 = DIRECTION('',(0.,0.,-1.)); +#397102 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#397103 = CYLINDRICAL_SURFACE('',#397104,0.139999827125); +#397104 = AXIS2_PLACEMENT_3D('',#397105,#397106,#397107); +#397105 = CARTESIAN_POINT('',(148.67000017287,-93.62000017287,1.51)); +#397106 = DIRECTION('',(0.,0.,-1.)); +#397107 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#397108 = ADVANCED_FACE('',(#397109),#397134,.T.); +#397109 = FACE_BOUND('',#397110,.T.); +#397110 = EDGE_LOOP('',(#397111,#397112,#397120,#397128)); +#397111 = ORIENTED_EDGE('',*,*,#397089,.T.); +#397112 = ORIENTED_EDGE('',*,*,#397113,.T.); +#397113 = EDGE_CURVE('',#397081,#397114,#397116,.T.); +#397114 = VERTEX_POINT('',#397115); +#397115 = CARTESIAN_POINT('',(148.33,-93.76,1.55)); +#397116 = LINE('',#397117,#397118); +#397117 = CARTESIAN_POINT('',(148.67,-93.76,1.55)); +#397118 = VECTOR('',#397119,1.); +#397119 = DIRECTION('',(-1.,0.,0.)); +#397120 = ORIENTED_EDGE('',*,*,#397121,.F.); +#397121 = EDGE_CURVE('',#397122,#397114,#397124,.T.); +#397122 = VERTEX_POINT('',#397123); +#397123 = CARTESIAN_POINT('',(148.33,-93.76,1.51)); +#397124 = LINE('',#397125,#397126); +#397125 = CARTESIAN_POINT('',(148.33,-93.76,1.51)); +#397126 = VECTOR('',#397127,1.); +#397127 = DIRECTION('',(0.,0.,1.)); +#397128 = ORIENTED_EDGE('',*,*,#397129,.F.); +#397129 = EDGE_CURVE('',#397090,#397122,#397130,.T.); +#397130 = LINE('',#397131,#397132); +#397131 = CARTESIAN_POINT('',(148.67,-93.76,1.51)); +#397132 = VECTOR('',#397133,1.); +#397133 = DIRECTION('',(-1.,0.,0.)); +#397134 = PLANE('',#397135); +#397135 = AXIS2_PLACEMENT_3D('',#397136,#397137,#397138); +#397136 = CARTESIAN_POINT('',(148.67,-93.76,1.51)); +#397137 = DIRECTION('',(0.,-1.,0.)); +#397138 = DIRECTION('',(-1.,0.,0.)); +#397139 = ADVANCED_FACE('',(#397140),#397167,.T.); +#397140 = FACE_BOUND('',#397141,.T.); +#397141 = EDGE_LOOP('',(#397142,#397143,#397152,#397160)); +#397142 = ORIENTED_EDGE('',*,*,#397121,.T.); +#397143 = ORIENTED_EDGE('',*,*,#397144,.T.); +#397144 = EDGE_CURVE('',#397114,#397145,#397147,.T.); +#397145 = VERTEX_POINT('',#397146); +#397146 = CARTESIAN_POINT('',(148.19,-93.62,1.55)); +#397147 = CIRCLE('',#397148,0.139999827125); +#397148 = AXIS2_PLACEMENT_3D('',#397149,#397150,#397151); +#397149 = CARTESIAN_POINT('',(148.32999982712,-93.62000017287,1.55)); +#397150 = DIRECTION('',(0.,0.,-1.)); +#397151 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#397152 = ORIENTED_EDGE('',*,*,#397153,.F.); +#397153 = EDGE_CURVE('',#397154,#397145,#397156,.T.); +#397154 = VERTEX_POINT('',#397155); +#397155 = CARTESIAN_POINT('',(148.19,-93.62,1.51)); +#397156 = LINE('',#397157,#397158); +#397157 = CARTESIAN_POINT('',(148.19,-93.62,1.51)); +#397158 = VECTOR('',#397159,1.); +#397159 = DIRECTION('',(0.,0.,1.)); +#397160 = ORIENTED_EDGE('',*,*,#397161,.F.); +#397161 = EDGE_CURVE('',#397122,#397154,#397162,.T.); +#397162 = CIRCLE('',#397163,0.139999827125); +#397163 = AXIS2_PLACEMENT_3D('',#397164,#397165,#397166); +#397164 = CARTESIAN_POINT('',(148.32999982712,-93.62000017287,1.51)); +#397165 = DIRECTION('',(0.,0.,-1.)); +#397166 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#397167 = CYLINDRICAL_SURFACE('',#397168,0.139999827125); +#397168 = AXIS2_PLACEMENT_3D('',#397169,#397170,#397171); +#397169 = CARTESIAN_POINT('',(148.32999982712,-93.62000017287,1.51)); +#397170 = DIRECTION('',(0.,0.,-1.)); +#397171 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#397172 = ADVANCED_FACE('',(#397173),#397189,.T.); +#397173 = FACE_BOUND('',#397174,.T.); +#397174 = EDGE_LOOP('',(#397175,#397176,#397182,#397183)); +#397175 = ORIENTED_EDGE('',*,*,#397153,.T.); +#397176 = ORIENTED_EDGE('',*,*,#397177,.T.); +#397177 = EDGE_CURVE('',#397145,#396945,#397178,.T.); +#397178 = LINE('',#397179,#397180); +#397179 = CARTESIAN_POINT('',(148.19,-93.62,1.55)); +#397180 = VECTOR('',#397181,1.); +#397181 = DIRECTION('',(0.,1.,0.)); +#397182 = ORIENTED_EDGE('',*,*,#396942,.F.); +#397183 = ORIENTED_EDGE('',*,*,#397184,.F.); +#397184 = EDGE_CURVE('',#397154,#396943,#397185,.T.); +#397185 = LINE('',#397186,#397187); +#397186 = CARTESIAN_POINT('',(148.19,-93.62,1.51)); +#397187 = VECTOR('',#397188,1.); +#397188 = DIRECTION('',(0.,1.,0.)); +#397189 = PLANE('',#397190); +#397190 = AXIS2_PLACEMENT_3D('',#397191,#397192,#397193); +#397191 = CARTESIAN_POINT('',(148.19,-93.62,1.51)); +#397192 = DIRECTION('',(-1.,0.,0.)); +#397193 = DIRECTION('',(0.,1.,0.)); +#397194 = ADVANCED_FACE('',(#397195),#397205,.F.); +#397195 = FACE_BOUND('',#397196,.T.); +#397196 = EDGE_LOOP('',(#397197,#397198,#397199,#397200,#397201,#397202, + #397203,#397204)); +#397197 = ORIENTED_EDGE('',*,*,#396969,.T.); +#397198 = ORIENTED_EDGE('',*,*,#397001,.T.); +#397199 = ORIENTED_EDGE('',*,*,#397033,.T.); +#397200 = ORIENTED_EDGE('',*,*,#397065,.T.); +#397201 = ORIENTED_EDGE('',*,*,#397097,.T.); +#397202 = ORIENTED_EDGE('',*,*,#397129,.T.); +#397203 = ORIENTED_EDGE('',*,*,#397161,.T.); +#397204 = ORIENTED_EDGE('',*,*,#397184,.T.); +#397205 = PLANE('',#397206); +#397206 = AXIS2_PLACEMENT_3D('',#397207,#397208,#397209); +#397207 = CARTESIAN_POINT('',(0.,0.,1.51)); +#397208 = DIRECTION('',(0.,0.,1.)); +#397209 = DIRECTION('',(1.,0.,-0.)); +#397210 = ADVANCED_FACE('',(#397211),#397221,.T.); +#397211 = FACE_BOUND('',#397212,.F.); +#397212 = EDGE_LOOP('',(#397213,#397214,#397215,#397216,#397217,#397218, + #397219,#397220)); +#397213 = ORIENTED_EDGE('',*,*,#396952,.T.); +#397214 = ORIENTED_EDGE('',*,*,#396985,.T.); +#397215 = ORIENTED_EDGE('',*,*,#397016,.T.); +#397216 = ORIENTED_EDGE('',*,*,#397049,.T.); +#397217 = ORIENTED_EDGE('',*,*,#397080,.T.); +#397218 = ORIENTED_EDGE('',*,*,#397113,.T.); +#397219 = ORIENTED_EDGE('',*,*,#397144,.T.); +#397220 = ORIENTED_EDGE('',*,*,#397177,.T.); +#397221 = PLANE('',#397222); +#397222 = AXIS2_PLACEMENT_3D('',#397223,#397224,#397225); +#397223 = CARTESIAN_POINT('',(0.,0.,1.55)); +#397224 = DIRECTION('',(0.,0.,1.)); +#397225 = DIRECTION('',(1.,0.,-0.)); +#397226 = MANIFOLD_SOLID_BREP('',#397227); +#397227 = CLOSED_SHELL('',(#397228,#397270,#397301,#397334,#397365, + #397398,#397429,#397462,#397484,#397500)); +#397228 = ADVANCED_FACE('',(#397229),#397265,.T.); +#397229 = FACE_BOUND('',#397230,.T.); +#397230 = EDGE_LOOP('',(#397231,#397241,#397250,#397258)); +#397231 = ORIENTED_EDGE('',*,*,#397232,.T.); +#397232 = EDGE_CURVE('',#397233,#397235,#397237,.T.); +#397233 = VERTEX_POINT('',#397234); +#397234 = CARTESIAN_POINT('',(128.7,-156.3,1.51)); +#397235 = VERTEX_POINT('',#397236); +#397236 = CARTESIAN_POINT('',(128.7,-156.3,1.55)); +#397237 = LINE('',#397238,#397239); +#397238 = CARTESIAN_POINT('',(128.7,-156.3,1.51)); +#397239 = VECTOR('',#397240,1.); +#397240 = DIRECTION('',(0.,0.,1.)); +#397241 = ORIENTED_EDGE('',*,*,#397242,.T.); +#397242 = EDGE_CURVE('',#397235,#397243,#397245,.T.); +#397243 = VERTEX_POINT('',#397244); +#397244 = CARTESIAN_POINT('',(128.85,-156.15,1.55)); +#397245 = CIRCLE('',#397246,0.150000058649); +#397246 = AXIS2_PLACEMENT_3D('',#397247,#397248,#397249); +#397247 = CARTESIAN_POINT('',(128.85000005864,-156.3000000586,1.55)); +#397248 = DIRECTION('',(0.,0.,-1.)); +#397249 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#397250 = ORIENTED_EDGE('',*,*,#397251,.F.); +#397251 = EDGE_CURVE('',#397252,#397243,#397254,.T.); +#397252 = VERTEX_POINT('',#397253); +#397253 = CARTESIAN_POINT('',(128.85,-156.15,1.51)); +#397254 = LINE('',#397255,#397256); +#397255 = CARTESIAN_POINT('',(128.85,-156.15,1.51)); +#397256 = VECTOR('',#397257,1.); +#397257 = DIRECTION('',(0.,0.,1.)); +#397258 = ORIENTED_EDGE('',*,*,#397259,.F.); +#397259 = EDGE_CURVE('',#397233,#397252,#397260,.T.); +#397260 = CIRCLE('',#397261,0.150000058649); +#397261 = AXIS2_PLACEMENT_3D('',#397262,#397263,#397264); +#397262 = CARTESIAN_POINT('',(128.85000005864,-156.3000000586,1.51)); +#397263 = DIRECTION('',(0.,0.,-1.)); +#397264 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#397265 = CYLINDRICAL_SURFACE('',#397266,0.150000058649); +#397266 = AXIS2_PLACEMENT_3D('',#397267,#397268,#397269); +#397267 = CARTESIAN_POINT('',(128.85000005864,-156.3000000586,1.51)); +#397268 = DIRECTION('',(0.,0.,-1.)); +#397269 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#397270 = ADVANCED_FACE('',(#397271),#397296,.T.); +#397271 = FACE_BOUND('',#397272,.T.); +#397272 = EDGE_LOOP('',(#397273,#397274,#397282,#397290)); +#397273 = ORIENTED_EDGE('',*,*,#397251,.T.); +#397274 = ORIENTED_EDGE('',*,*,#397275,.T.); +#397275 = EDGE_CURVE('',#397243,#397276,#397278,.T.); +#397276 = VERTEX_POINT('',#397277); +#397277 = CARTESIAN_POINT('',(129.15,-156.15,1.55)); +#397278 = LINE('',#397279,#397280); +#397279 = CARTESIAN_POINT('',(128.85,-156.15,1.55)); +#397280 = VECTOR('',#397281,1.); +#397281 = DIRECTION('',(1.,0.,0.)); +#397282 = ORIENTED_EDGE('',*,*,#397283,.F.); +#397283 = EDGE_CURVE('',#397284,#397276,#397286,.T.); +#397284 = VERTEX_POINT('',#397285); +#397285 = CARTESIAN_POINT('',(129.15,-156.15,1.51)); +#397286 = LINE('',#397287,#397288); +#397287 = CARTESIAN_POINT('',(129.15,-156.15,1.51)); +#397288 = VECTOR('',#397289,1.); +#397289 = DIRECTION('',(0.,0.,1.)); +#397290 = ORIENTED_EDGE('',*,*,#397291,.F.); +#397291 = EDGE_CURVE('',#397252,#397284,#397292,.T.); +#397292 = LINE('',#397293,#397294); +#397293 = CARTESIAN_POINT('',(128.85,-156.15,1.51)); +#397294 = VECTOR('',#397295,1.); +#397295 = DIRECTION('',(1.,0.,0.)); +#397296 = PLANE('',#397297); +#397297 = AXIS2_PLACEMENT_3D('',#397298,#397299,#397300); +#397298 = CARTESIAN_POINT('',(128.85,-156.15,1.51)); +#397299 = DIRECTION('',(0.,1.,0.)); +#397300 = DIRECTION('',(1.,0.,0.)); +#397301 = ADVANCED_FACE('',(#397302),#397329,.T.); +#397302 = FACE_BOUND('',#397303,.T.); +#397303 = EDGE_LOOP('',(#397304,#397305,#397314,#397322)); +#397304 = ORIENTED_EDGE('',*,*,#397283,.T.); +#397305 = ORIENTED_EDGE('',*,*,#397306,.T.); +#397306 = EDGE_CURVE('',#397276,#397307,#397309,.T.); +#397307 = VERTEX_POINT('',#397308); +#397308 = CARTESIAN_POINT('',(129.3,-156.3,1.55)); +#397309 = CIRCLE('',#397310,0.150000058649); +#397310 = AXIS2_PLACEMENT_3D('',#397311,#397312,#397313); +#397311 = CARTESIAN_POINT('',(129.14999994135,-156.3000000586,1.55)); +#397312 = DIRECTION('',(0.,0.,-1.)); +#397313 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#397314 = ORIENTED_EDGE('',*,*,#397315,.F.); +#397315 = EDGE_CURVE('',#397316,#397307,#397318,.T.); +#397316 = VERTEX_POINT('',#397317); +#397317 = CARTESIAN_POINT('',(129.3,-156.3,1.51)); +#397318 = LINE('',#397319,#397320); +#397319 = CARTESIAN_POINT('',(129.3,-156.3,1.51)); +#397320 = VECTOR('',#397321,1.); +#397321 = DIRECTION('',(0.,0.,1.)); +#397322 = ORIENTED_EDGE('',*,*,#397323,.F.); +#397323 = EDGE_CURVE('',#397284,#397316,#397324,.T.); +#397324 = CIRCLE('',#397325,0.150000058649); +#397325 = AXIS2_PLACEMENT_3D('',#397326,#397327,#397328); +#397326 = CARTESIAN_POINT('',(129.14999994135,-156.3000000586,1.51)); +#397327 = DIRECTION('',(0.,0.,-1.)); +#397328 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#397329 = CYLINDRICAL_SURFACE('',#397330,0.150000058649); +#397330 = AXIS2_PLACEMENT_3D('',#397331,#397332,#397333); +#397331 = CARTESIAN_POINT('',(129.14999994135,-156.3000000586,1.51)); +#397332 = DIRECTION('',(0.,0.,-1.)); +#397333 = DIRECTION('',(3.909955984539E-07,1.,0.)); +#397334 = ADVANCED_FACE('',(#397335),#397360,.T.); +#397335 = FACE_BOUND('',#397336,.T.); +#397336 = EDGE_LOOP('',(#397337,#397338,#397346,#397354)); +#397337 = ORIENTED_EDGE('',*,*,#397315,.T.); +#397338 = ORIENTED_EDGE('',*,*,#397339,.T.); +#397339 = EDGE_CURVE('',#397307,#397340,#397342,.T.); +#397340 = VERTEX_POINT('',#397341); +#397341 = CARTESIAN_POINT('',(129.3,-157.8,1.55)); +#397342 = LINE('',#397343,#397344); +#397343 = CARTESIAN_POINT('',(129.3,-156.3,1.55)); +#397344 = VECTOR('',#397345,1.); +#397345 = DIRECTION('',(0.,-1.,0.)); +#397346 = ORIENTED_EDGE('',*,*,#397347,.F.); +#397347 = EDGE_CURVE('',#397348,#397340,#397350,.T.); +#397348 = VERTEX_POINT('',#397349); +#397349 = CARTESIAN_POINT('',(129.3,-157.8,1.51)); +#397350 = LINE('',#397351,#397352); +#397351 = CARTESIAN_POINT('',(129.3,-157.8,1.51)); +#397352 = VECTOR('',#397353,1.); +#397353 = DIRECTION('',(0.,0.,1.)); +#397354 = ORIENTED_EDGE('',*,*,#397355,.F.); +#397355 = EDGE_CURVE('',#397316,#397348,#397356,.T.); +#397356 = LINE('',#397357,#397358); +#397357 = CARTESIAN_POINT('',(129.3,-156.3,1.51)); +#397358 = VECTOR('',#397359,1.); +#397359 = DIRECTION('',(0.,-1.,0.)); +#397360 = PLANE('',#397361); +#397361 = AXIS2_PLACEMENT_3D('',#397362,#397363,#397364); +#397362 = CARTESIAN_POINT('',(129.3,-156.3,1.51)); +#397363 = DIRECTION('',(1.,0.,-0.)); +#397364 = DIRECTION('',(0.,-1.,0.)); +#397365 = ADVANCED_FACE('',(#397366),#397393,.T.); +#397366 = FACE_BOUND('',#397367,.T.); +#397367 = EDGE_LOOP('',(#397368,#397369,#397378,#397386)); +#397368 = ORIENTED_EDGE('',*,*,#397347,.T.); +#397369 = ORIENTED_EDGE('',*,*,#397370,.T.); +#397370 = EDGE_CURVE('',#397340,#397371,#397373,.T.); +#397371 = VERTEX_POINT('',#397372); +#397372 = CARTESIAN_POINT('',(129.15,-157.95,1.55)); +#397373 = CIRCLE('',#397374,0.150000058649); +#397374 = AXIS2_PLACEMENT_3D('',#397375,#397376,#397377); +#397375 = CARTESIAN_POINT('',(129.14999994135,-157.7999999413,1.55)); +#397376 = DIRECTION('',(0.,0.,-1.)); +#397377 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#397378 = ORIENTED_EDGE('',*,*,#397379,.F.); +#397379 = EDGE_CURVE('',#397380,#397371,#397382,.T.); +#397380 = VERTEX_POINT('',#397381); +#397381 = CARTESIAN_POINT('',(129.15,-157.95,1.51)); +#397382 = LINE('',#397383,#397384); +#397383 = CARTESIAN_POINT('',(129.15,-157.95,1.51)); +#397384 = VECTOR('',#397385,1.); +#397385 = DIRECTION('',(0.,0.,1.)); +#397386 = ORIENTED_EDGE('',*,*,#397387,.F.); +#397387 = EDGE_CURVE('',#397348,#397380,#397388,.T.); +#397388 = CIRCLE('',#397389,0.150000058649); +#397389 = AXIS2_PLACEMENT_3D('',#397390,#397391,#397392); +#397390 = CARTESIAN_POINT('',(129.14999994135,-157.7999999413,1.51)); +#397391 = DIRECTION('',(0.,0.,-1.)); +#397392 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#397393 = CYLINDRICAL_SURFACE('',#397394,0.150000058649); +#397394 = AXIS2_PLACEMENT_3D('',#397395,#397396,#397397); +#397395 = CARTESIAN_POINT('',(129.14999994135,-157.7999999413,1.51)); +#397396 = DIRECTION('',(0.,0.,-1.)); +#397397 = DIRECTION('',(1.,-3.90995219498E-07,0.)); +#397398 = ADVANCED_FACE('',(#397399),#397424,.T.); +#397399 = FACE_BOUND('',#397400,.T.); +#397400 = EDGE_LOOP('',(#397401,#397402,#397410,#397418)); +#397401 = ORIENTED_EDGE('',*,*,#397379,.T.); +#397402 = ORIENTED_EDGE('',*,*,#397403,.T.); +#397403 = EDGE_CURVE('',#397371,#397404,#397406,.T.); +#397404 = VERTEX_POINT('',#397405); +#397405 = CARTESIAN_POINT('',(128.85,-157.95,1.55)); +#397406 = LINE('',#397407,#397408); +#397407 = CARTESIAN_POINT('',(129.15,-157.95,1.55)); +#397408 = VECTOR('',#397409,1.); +#397409 = DIRECTION('',(-1.,0.,0.)); +#397410 = ORIENTED_EDGE('',*,*,#397411,.F.); +#397411 = EDGE_CURVE('',#397412,#397404,#397414,.T.); +#397412 = VERTEX_POINT('',#397413); +#397413 = CARTESIAN_POINT('',(128.85,-157.95,1.51)); +#397414 = LINE('',#397415,#397416); +#397415 = CARTESIAN_POINT('',(128.85,-157.95,1.51)); +#397416 = VECTOR('',#397417,1.); +#397417 = DIRECTION('',(0.,0.,1.)); +#397418 = ORIENTED_EDGE('',*,*,#397419,.F.); +#397419 = EDGE_CURVE('',#397380,#397412,#397420,.T.); +#397420 = LINE('',#397421,#397422); +#397421 = CARTESIAN_POINT('',(129.15,-157.95,1.51)); +#397422 = VECTOR('',#397423,1.); +#397423 = DIRECTION('',(-1.,0.,0.)); +#397424 = PLANE('',#397425); +#397425 = AXIS2_PLACEMENT_3D('',#397426,#397427,#397428); +#397426 = CARTESIAN_POINT('',(129.15,-157.95,1.51)); +#397427 = DIRECTION('',(0.,-1.,0.)); +#397428 = DIRECTION('',(-1.,0.,0.)); +#397429 = ADVANCED_FACE('',(#397430),#397457,.T.); +#397430 = FACE_BOUND('',#397431,.T.); +#397431 = EDGE_LOOP('',(#397432,#397433,#397442,#397450)); +#397432 = ORIENTED_EDGE('',*,*,#397411,.T.); +#397433 = ORIENTED_EDGE('',*,*,#397434,.T.); +#397434 = EDGE_CURVE('',#397404,#397435,#397437,.T.); +#397435 = VERTEX_POINT('',#397436); +#397436 = CARTESIAN_POINT('',(128.7,-157.8,1.55)); +#397437 = CIRCLE('',#397438,0.150000058649); +#397438 = AXIS2_PLACEMENT_3D('',#397439,#397440,#397441); +#397439 = CARTESIAN_POINT('',(128.85000005864,-157.7999999413,1.55)); +#397440 = DIRECTION('',(0.,0.,-1.)); +#397441 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#397442 = ORIENTED_EDGE('',*,*,#397443,.F.); +#397443 = EDGE_CURVE('',#397444,#397435,#397446,.T.); +#397444 = VERTEX_POINT('',#397445); +#397445 = CARTESIAN_POINT('',(128.7,-157.8,1.51)); +#397446 = LINE('',#397447,#397448); +#397447 = CARTESIAN_POINT('',(128.7,-157.8,1.51)); +#397448 = VECTOR('',#397449,1.); +#397449 = DIRECTION('',(0.,0.,1.)); +#397450 = ORIENTED_EDGE('',*,*,#397451,.F.); +#397451 = EDGE_CURVE('',#397412,#397444,#397452,.T.); +#397452 = CIRCLE('',#397453,0.150000058649); +#397453 = AXIS2_PLACEMENT_3D('',#397454,#397455,#397456); +#397454 = CARTESIAN_POINT('',(128.85000005864,-157.7999999413,1.51)); +#397455 = DIRECTION('',(0.,0.,-1.)); +#397456 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#397457 = CYLINDRICAL_SURFACE('',#397458,0.150000058649); +#397458 = AXIS2_PLACEMENT_3D('',#397459,#397460,#397461); +#397459 = CARTESIAN_POINT('',(128.85000005864,-157.7999999413,1.51)); +#397460 = DIRECTION('',(0.,0.,-1.)); +#397461 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#397462 = ADVANCED_FACE('',(#397463),#397479,.T.); +#397463 = FACE_BOUND('',#397464,.T.); +#397464 = EDGE_LOOP('',(#397465,#397466,#397472,#397473)); +#397465 = ORIENTED_EDGE('',*,*,#397443,.T.); +#397466 = ORIENTED_EDGE('',*,*,#397467,.T.); +#397467 = EDGE_CURVE('',#397435,#397235,#397468,.T.); +#397468 = LINE('',#397469,#397470); +#397469 = CARTESIAN_POINT('',(128.7,-157.8,1.55)); +#397470 = VECTOR('',#397471,1.); +#397471 = DIRECTION('',(0.,1.,0.)); +#397472 = ORIENTED_EDGE('',*,*,#397232,.F.); +#397473 = ORIENTED_EDGE('',*,*,#397474,.F.); +#397474 = EDGE_CURVE('',#397444,#397233,#397475,.T.); +#397475 = LINE('',#397476,#397477); +#397476 = CARTESIAN_POINT('',(128.7,-157.8,1.51)); +#397477 = VECTOR('',#397478,1.); +#397478 = DIRECTION('',(0.,1.,0.)); +#397479 = PLANE('',#397480); +#397480 = AXIS2_PLACEMENT_3D('',#397481,#397482,#397483); +#397481 = CARTESIAN_POINT('',(128.7,-157.8,1.51)); +#397482 = DIRECTION('',(-1.,0.,0.)); +#397483 = DIRECTION('',(0.,1.,0.)); +#397484 = ADVANCED_FACE('',(#397485),#397495,.F.); +#397485 = FACE_BOUND('',#397486,.T.); +#397486 = EDGE_LOOP('',(#397487,#397488,#397489,#397490,#397491,#397492, + #397493,#397494)); +#397487 = ORIENTED_EDGE('',*,*,#397259,.T.); +#397488 = ORIENTED_EDGE('',*,*,#397291,.T.); +#397489 = ORIENTED_EDGE('',*,*,#397323,.T.); +#397490 = ORIENTED_EDGE('',*,*,#397355,.T.); +#397491 = ORIENTED_EDGE('',*,*,#397387,.T.); +#397492 = ORIENTED_EDGE('',*,*,#397419,.T.); +#397493 = ORIENTED_EDGE('',*,*,#397451,.T.); +#397494 = ORIENTED_EDGE('',*,*,#397474,.T.); +#397495 = PLANE('',#397496); +#397496 = AXIS2_PLACEMENT_3D('',#397497,#397498,#397499); +#397497 = CARTESIAN_POINT('',(0.,0.,1.51)); +#397498 = DIRECTION('',(0.,0.,1.)); +#397499 = DIRECTION('',(1.,0.,-0.)); +#397500 = ADVANCED_FACE('',(#397501),#397511,.T.); +#397501 = FACE_BOUND('',#397502,.F.); +#397502 = EDGE_LOOP('',(#397503,#397504,#397505,#397506,#397507,#397508, + #397509,#397510)); +#397503 = ORIENTED_EDGE('',*,*,#397242,.T.); +#397504 = ORIENTED_EDGE('',*,*,#397275,.T.); +#397505 = ORIENTED_EDGE('',*,*,#397306,.T.); +#397506 = ORIENTED_EDGE('',*,*,#397339,.T.); +#397507 = ORIENTED_EDGE('',*,*,#397370,.T.); +#397508 = ORIENTED_EDGE('',*,*,#397403,.T.); +#397509 = ORIENTED_EDGE('',*,*,#397434,.T.); +#397510 = ORIENTED_EDGE('',*,*,#397467,.T.); +#397511 = PLANE('',#397512); +#397512 = AXIS2_PLACEMENT_3D('',#397513,#397514,#397515); +#397513 = CARTESIAN_POINT('',(0.,0.,1.55)); +#397514 = DIRECTION('',(0.,0.,1.)); +#397515 = DIRECTION('',(1.,0.,-0.)); +#397516 = MANIFOLD_SOLID_BREP('',#397517); +#397517 = CLOSED_SHELL('',(#397518,#397560,#397591,#397624,#397655, + #397688,#397719,#397752,#397774,#397790)); +#397518 = ADVANCED_FACE('',(#397519),#397555,.T.); +#397519 = FACE_BOUND('',#397520,.T.); +#397520 = EDGE_LOOP('',(#397521,#397531,#397540,#397548)); +#397521 = ORIENTED_EDGE('',*,*,#397522,.T.); +#397522 = EDGE_CURVE('',#397523,#397525,#397527,.T.); +#397523 = VERTEX_POINT('',#397524); +#397524 = CARTESIAN_POINT('',(126.16,-66.23,1.51)); +#397525 = VERTEX_POINT('',#397526); +#397526 = CARTESIAN_POINT('',(126.16,-66.23,1.55)); +#397527 = LINE('',#397528,#397529); +#397528 = CARTESIAN_POINT('',(126.16,-66.23,1.51)); +#397529 = VECTOR('',#397530,1.); +#397530 = DIRECTION('',(0.,0.,1.)); +#397531 = ORIENTED_EDGE('',*,*,#397532,.T.); +#397532 = EDGE_CURVE('',#397525,#397533,#397535,.T.); +#397533 = VERTEX_POINT('',#397534); +#397534 = CARTESIAN_POINT('',(126.3,-66.09,1.55)); +#397535 = CIRCLE('',#397536,0.139999827125); +#397536 = AXIS2_PLACEMENT_3D('',#397537,#397538,#397539); +#397537 = CARTESIAN_POINT('',(126.29999982712,-66.22999982712,1.55)); +#397538 = DIRECTION('',(0.,0.,-1.)); +#397539 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#397540 = ORIENTED_EDGE('',*,*,#397541,.F.); +#397541 = EDGE_CURVE('',#397542,#397533,#397544,.T.); +#397542 = VERTEX_POINT('',#397543); +#397543 = CARTESIAN_POINT('',(126.3,-66.09,1.51)); +#397544 = LINE('',#397545,#397546); +#397545 = CARTESIAN_POINT('',(126.3,-66.09,1.51)); +#397546 = VECTOR('',#397547,1.); +#397547 = DIRECTION('',(0.,0.,1.)); +#397548 = ORIENTED_EDGE('',*,*,#397549,.F.); +#397549 = EDGE_CURVE('',#397523,#397542,#397550,.T.); +#397550 = CIRCLE('',#397551,0.139999827125); +#397551 = AXIS2_PLACEMENT_3D('',#397552,#397553,#397554); +#397552 = CARTESIAN_POINT('',(126.29999982712,-66.22999982712,1.51)); +#397553 = DIRECTION('',(0.,0.,-1.)); +#397554 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#397555 = CYLINDRICAL_SURFACE('',#397556,0.139999827125); +#397556 = AXIS2_PLACEMENT_3D('',#397557,#397558,#397559); +#397557 = CARTESIAN_POINT('',(126.29999982712,-66.22999982712,1.51)); +#397558 = DIRECTION('',(0.,0.,-1.)); +#397559 = DIRECTION('',(-0.999999999999,-1.234820349747E-06,-0.)); +#397560 = ADVANCED_FACE('',(#397561),#397586,.T.); +#397561 = FACE_BOUND('',#397562,.T.); +#397562 = EDGE_LOOP('',(#397563,#397564,#397572,#397580)); +#397563 = ORIENTED_EDGE('',*,*,#397541,.T.); +#397564 = ORIENTED_EDGE('',*,*,#397565,.T.); +#397565 = EDGE_CURVE('',#397533,#397566,#397568,.T.); +#397566 = VERTEX_POINT('',#397567); +#397567 = CARTESIAN_POINT('',(126.58,-66.09,1.55)); +#397568 = LINE('',#397569,#397570); +#397569 = CARTESIAN_POINT('',(126.3,-66.09,1.55)); +#397570 = VECTOR('',#397571,1.); +#397571 = DIRECTION('',(1.,0.,0.)); +#397572 = ORIENTED_EDGE('',*,*,#397573,.F.); +#397573 = EDGE_CURVE('',#397574,#397566,#397576,.T.); +#397574 = VERTEX_POINT('',#397575); +#397575 = CARTESIAN_POINT('',(126.58,-66.09,1.51)); +#397576 = LINE('',#397577,#397578); +#397577 = CARTESIAN_POINT('',(126.58,-66.09,1.51)); +#397578 = VECTOR('',#397579,1.); +#397579 = DIRECTION('',(0.,0.,1.)); +#397580 = ORIENTED_EDGE('',*,*,#397581,.F.); +#397581 = EDGE_CURVE('',#397542,#397574,#397582,.T.); +#397582 = LINE('',#397583,#397584); +#397583 = CARTESIAN_POINT('',(126.3,-66.09,1.51)); +#397584 = VECTOR('',#397585,1.); +#397585 = DIRECTION('',(1.,0.,0.)); +#397586 = PLANE('',#397587); +#397587 = AXIS2_PLACEMENT_3D('',#397588,#397589,#397590); +#397588 = CARTESIAN_POINT('',(126.3,-66.09,1.51)); +#397589 = DIRECTION('',(0.,1.,0.)); +#397590 = DIRECTION('',(1.,0.,0.)); +#397591 = ADVANCED_FACE('',(#397592),#397619,.T.); +#397592 = FACE_BOUND('',#397593,.T.); +#397593 = EDGE_LOOP('',(#397594,#397595,#397604,#397612)); +#397594 = ORIENTED_EDGE('',*,*,#397573,.T.); +#397595 = ORIENTED_EDGE('',*,*,#397596,.T.); +#397596 = EDGE_CURVE('',#397566,#397597,#397599,.T.); +#397597 = VERTEX_POINT('',#397598); +#397598 = CARTESIAN_POINT('',(126.72,-66.23,1.55)); +#397599 = CIRCLE('',#397600,0.139999827125); +#397600 = AXIS2_PLACEMENT_3D('',#397601,#397602,#397603); +#397601 = CARTESIAN_POINT('',(126.58000017287,-66.22999982712,1.55)); +#397602 = DIRECTION('',(0.,0.,-1.)); +#397603 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#397604 = ORIENTED_EDGE('',*,*,#397605,.F.); +#397605 = EDGE_CURVE('',#397606,#397597,#397608,.T.); +#397606 = VERTEX_POINT('',#397607); +#397607 = CARTESIAN_POINT('',(126.72,-66.23,1.51)); +#397608 = LINE('',#397609,#397610); +#397609 = CARTESIAN_POINT('',(126.72,-66.23,1.51)); +#397610 = VECTOR('',#397611,1.); +#397611 = DIRECTION('',(0.,0.,1.)); +#397612 = ORIENTED_EDGE('',*,*,#397613,.F.); +#397613 = EDGE_CURVE('',#397574,#397606,#397614,.T.); +#397614 = CIRCLE('',#397615,0.139999827125); +#397615 = AXIS2_PLACEMENT_3D('',#397616,#397617,#397618); +#397616 = CARTESIAN_POINT('',(126.58000017287,-66.22999982712,1.51)); +#397617 = DIRECTION('',(0.,0.,-1.)); +#397618 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#397619 = CYLINDRICAL_SURFACE('',#397620,0.139999827125); +#397620 = AXIS2_PLACEMENT_3D('',#397621,#397622,#397623); +#397621 = CARTESIAN_POINT('',(126.58000017287,-66.22999982712,1.51)); +#397622 = DIRECTION('',(0.,0.,-1.)); +#397623 = DIRECTION('',(-1.234820349747E-06,0.999999999999,0.)); +#397624 = ADVANCED_FACE('',(#397625),#397650,.T.); +#397625 = FACE_BOUND('',#397626,.T.); +#397626 = EDGE_LOOP('',(#397627,#397628,#397636,#397644)); +#397627 = ORIENTED_EDGE('',*,*,#397605,.T.); +#397628 = ORIENTED_EDGE('',*,*,#397629,.T.); +#397629 = EDGE_CURVE('',#397597,#397630,#397632,.T.); +#397630 = VERTEX_POINT('',#397631); +#397631 = CARTESIAN_POINT('',(126.72,-66.57,1.55)); +#397632 = LINE('',#397633,#397634); +#397633 = CARTESIAN_POINT('',(126.72,-66.23,1.55)); +#397634 = VECTOR('',#397635,1.); +#397635 = DIRECTION('',(0.,-1.,0.)); +#397636 = ORIENTED_EDGE('',*,*,#397637,.F.); +#397637 = EDGE_CURVE('',#397638,#397630,#397640,.T.); +#397638 = VERTEX_POINT('',#397639); +#397639 = CARTESIAN_POINT('',(126.72,-66.57,1.51)); +#397640 = LINE('',#397641,#397642); +#397641 = CARTESIAN_POINT('',(126.72,-66.57,1.51)); +#397642 = VECTOR('',#397643,1.); +#397643 = DIRECTION('',(0.,0.,1.)); +#397644 = ORIENTED_EDGE('',*,*,#397645,.F.); +#397645 = EDGE_CURVE('',#397606,#397638,#397646,.T.); +#397646 = LINE('',#397647,#397648); +#397647 = CARTESIAN_POINT('',(126.72,-66.23,1.51)); +#397648 = VECTOR('',#397649,1.); +#397649 = DIRECTION('',(0.,-1.,0.)); +#397650 = PLANE('',#397651); +#397651 = AXIS2_PLACEMENT_3D('',#397652,#397653,#397654); +#397652 = CARTESIAN_POINT('',(126.72,-66.23,1.51)); +#397653 = DIRECTION('',(1.,0.,-0.)); +#397654 = DIRECTION('',(0.,-1.,0.)); +#397655 = ADVANCED_FACE('',(#397656),#397683,.T.); +#397656 = FACE_BOUND('',#397657,.T.); +#397657 = EDGE_LOOP('',(#397658,#397659,#397668,#397676)); +#397658 = ORIENTED_EDGE('',*,*,#397637,.T.); +#397659 = ORIENTED_EDGE('',*,*,#397660,.T.); +#397660 = EDGE_CURVE('',#397630,#397661,#397663,.T.); +#397661 = VERTEX_POINT('',#397662); +#397662 = CARTESIAN_POINT('',(126.58,-66.71,1.55)); +#397663 = CIRCLE('',#397664,0.139999827125); +#397664 = AXIS2_PLACEMENT_3D('',#397665,#397666,#397667); +#397665 = CARTESIAN_POINT('',(126.58000017287,-66.57000017287,1.55)); +#397666 = DIRECTION('',(0.,0.,-1.)); +#397667 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#397668 = ORIENTED_EDGE('',*,*,#397669,.F.); +#397669 = EDGE_CURVE('',#397670,#397661,#397672,.T.); +#397670 = VERTEX_POINT('',#397671); +#397671 = CARTESIAN_POINT('',(126.58,-66.71,1.51)); +#397672 = LINE('',#397673,#397674); +#397673 = CARTESIAN_POINT('',(126.58,-66.71,1.51)); +#397674 = VECTOR('',#397675,1.); +#397675 = DIRECTION('',(0.,0.,1.)); +#397676 = ORIENTED_EDGE('',*,*,#397677,.F.); +#397677 = EDGE_CURVE('',#397638,#397670,#397678,.T.); +#397678 = CIRCLE('',#397679,0.139999827125); +#397679 = AXIS2_PLACEMENT_3D('',#397680,#397681,#397682); +#397680 = CARTESIAN_POINT('',(126.58000017287,-66.57000017287,1.51)); +#397681 = DIRECTION('',(0.,0.,-1.)); +#397682 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#397683 = CYLINDRICAL_SURFACE('',#397684,0.139999827125); +#397684 = AXIS2_PLACEMENT_3D('',#397685,#397686,#397687); +#397685 = CARTESIAN_POINT('',(126.58000017287,-66.57000017287,1.51)); +#397686 = DIRECTION('',(0.,0.,-1.)); +#397687 = DIRECTION('',(0.999999999999,1.234820349747E-06,0.)); +#397688 = ADVANCED_FACE('',(#397689),#397714,.T.); +#397689 = FACE_BOUND('',#397690,.T.); +#397690 = EDGE_LOOP('',(#397691,#397692,#397700,#397708)); +#397691 = ORIENTED_EDGE('',*,*,#397669,.T.); +#397692 = ORIENTED_EDGE('',*,*,#397693,.T.); +#397693 = EDGE_CURVE('',#397661,#397694,#397696,.T.); +#397694 = VERTEX_POINT('',#397695); +#397695 = CARTESIAN_POINT('',(126.3,-66.71,1.55)); +#397696 = LINE('',#397697,#397698); +#397697 = CARTESIAN_POINT('',(126.58,-66.71,1.55)); +#397698 = VECTOR('',#397699,1.); +#397699 = DIRECTION('',(-1.,0.,0.)); +#397700 = ORIENTED_EDGE('',*,*,#397701,.F.); +#397701 = EDGE_CURVE('',#397702,#397694,#397704,.T.); +#397702 = VERTEX_POINT('',#397703); +#397703 = CARTESIAN_POINT('',(126.3,-66.71,1.51)); +#397704 = LINE('',#397705,#397706); +#397705 = CARTESIAN_POINT('',(126.3,-66.71,1.51)); +#397706 = VECTOR('',#397707,1.); +#397707 = DIRECTION('',(0.,0.,1.)); +#397708 = ORIENTED_EDGE('',*,*,#397709,.F.); +#397709 = EDGE_CURVE('',#397670,#397702,#397710,.T.); +#397710 = LINE('',#397711,#397712); +#397711 = CARTESIAN_POINT('',(126.58,-66.71,1.51)); +#397712 = VECTOR('',#397713,1.); +#397713 = DIRECTION('',(-1.,0.,0.)); +#397714 = PLANE('',#397715); +#397715 = AXIS2_PLACEMENT_3D('',#397716,#397717,#397718); +#397716 = CARTESIAN_POINT('',(126.58,-66.71,1.51)); +#397717 = DIRECTION('',(0.,-1.,0.)); +#397718 = DIRECTION('',(-1.,0.,0.)); +#397719 = ADVANCED_FACE('',(#397720),#397747,.T.); +#397720 = FACE_BOUND('',#397721,.T.); +#397721 = EDGE_LOOP('',(#397722,#397723,#397732,#397740)); +#397722 = ORIENTED_EDGE('',*,*,#397701,.T.); +#397723 = ORIENTED_EDGE('',*,*,#397724,.T.); +#397724 = EDGE_CURVE('',#397694,#397725,#397727,.T.); +#397725 = VERTEX_POINT('',#397726); +#397726 = CARTESIAN_POINT('',(126.16,-66.57,1.55)); +#397727 = CIRCLE('',#397728,0.139999827125); +#397728 = AXIS2_PLACEMENT_3D('',#397729,#397730,#397731); +#397729 = CARTESIAN_POINT('',(126.29999982712,-66.57000017287,1.55)); +#397730 = DIRECTION('',(0.,0.,-1.)); +#397731 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#397732 = ORIENTED_EDGE('',*,*,#397733,.F.); +#397733 = EDGE_CURVE('',#397734,#397725,#397736,.T.); +#397734 = VERTEX_POINT('',#397735); +#397735 = CARTESIAN_POINT('',(126.16,-66.57,1.51)); +#397736 = LINE('',#397737,#397738); +#397737 = CARTESIAN_POINT('',(126.16,-66.57,1.51)); +#397738 = VECTOR('',#397739,1.); +#397739 = DIRECTION('',(0.,0.,1.)); +#397740 = ORIENTED_EDGE('',*,*,#397741,.F.); +#397741 = EDGE_CURVE('',#397702,#397734,#397742,.T.); +#397742 = CIRCLE('',#397743,0.139999827125); +#397743 = AXIS2_PLACEMENT_3D('',#397744,#397745,#397746); +#397744 = CARTESIAN_POINT('',(126.29999982712,-66.57000017287,1.51)); +#397745 = DIRECTION('',(0.,0.,-1.)); +#397746 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#397747 = CYLINDRICAL_SURFACE('',#397748,0.139999827125); +#397748 = AXIS2_PLACEMENT_3D('',#397749,#397750,#397751); +#397749 = CARTESIAN_POINT('',(126.29999982712,-66.57000017287,1.51)); +#397750 = DIRECTION('',(0.,0.,-1.)); +#397751 = DIRECTION('',(1.234820349747E-06,-0.999999999999,0.)); +#397752 = ADVANCED_FACE('',(#397753),#397769,.T.); +#397753 = FACE_BOUND('',#397754,.T.); +#397754 = EDGE_LOOP('',(#397755,#397756,#397762,#397763)); +#397755 = ORIENTED_EDGE('',*,*,#397733,.T.); +#397756 = ORIENTED_EDGE('',*,*,#397757,.T.); +#397757 = EDGE_CURVE('',#397725,#397525,#397758,.T.); +#397758 = LINE('',#397759,#397760); +#397759 = CARTESIAN_POINT('',(126.16,-66.57,1.55)); +#397760 = VECTOR('',#397761,1.); +#397761 = DIRECTION('',(0.,1.,0.)); +#397762 = ORIENTED_EDGE('',*,*,#397522,.F.); +#397763 = ORIENTED_EDGE('',*,*,#397764,.F.); +#397764 = EDGE_CURVE('',#397734,#397523,#397765,.T.); +#397765 = LINE('',#397766,#397767); +#397766 = CARTESIAN_POINT('',(126.16,-66.57,1.51)); +#397767 = VECTOR('',#397768,1.); +#397768 = DIRECTION('',(0.,1.,0.)); +#397769 = PLANE('',#397770); +#397770 = AXIS2_PLACEMENT_3D('',#397771,#397772,#397773); +#397771 = CARTESIAN_POINT('',(126.16,-66.57,1.51)); +#397772 = DIRECTION('',(-1.,0.,0.)); +#397773 = DIRECTION('',(0.,1.,0.)); +#397774 = ADVANCED_FACE('',(#397775),#397785,.F.); +#397775 = FACE_BOUND('',#397776,.T.); +#397776 = EDGE_LOOP('',(#397777,#397778,#397779,#397780,#397781,#397782, + #397783,#397784)); +#397777 = ORIENTED_EDGE('',*,*,#397549,.T.); +#397778 = ORIENTED_EDGE('',*,*,#397581,.T.); +#397779 = ORIENTED_EDGE('',*,*,#397613,.T.); +#397780 = ORIENTED_EDGE('',*,*,#397645,.T.); +#397781 = ORIENTED_EDGE('',*,*,#397677,.T.); +#397782 = ORIENTED_EDGE('',*,*,#397709,.T.); +#397783 = ORIENTED_EDGE('',*,*,#397741,.T.); +#397784 = ORIENTED_EDGE('',*,*,#397764,.T.); +#397785 = PLANE('',#397786); +#397786 = AXIS2_PLACEMENT_3D('',#397787,#397788,#397789); +#397787 = CARTESIAN_POINT('',(0.,0.,1.51)); +#397788 = DIRECTION('',(0.,0.,1.)); +#397789 = DIRECTION('',(1.,0.,-0.)); +#397790 = ADVANCED_FACE('',(#397791),#397801,.T.); +#397791 = FACE_BOUND('',#397792,.F.); +#397792 = EDGE_LOOP('',(#397793,#397794,#397795,#397796,#397797,#397798, + #397799,#397800)); +#397793 = ORIENTED_EDGE('',*,*,#397532,.T.); +#397794 = ORIENTED_EDGE('',*,*,#397565,.T.); +#397795 = ORIENTED_EDGE('',*,*,#397596,.T.); +#397796 = ORIENTED_EDGE('',*,*,#397629,.T.); +#397797 = ORIENTED_EDGE('',*,*,#397660,.T.); +#397798 = ORIENTED_EDGE('',*,*,#397693,.T.); +#397799 = ORIENTED_EDGE('',*,*,#397724,.T.); +#397800 = ORIENTED_EDGE('',*,*,#397757,.T.); +#397801 = PLANE('',#397802); +#397802 = AXIS2_PLACEMENT_3D('',#397803,#397804,#397805); +#397803 = CARTESIAN_POINT('',(0.,0.,1.55)); +#397804 = DIRECTION('',(0.,0.,1.)); +#397805 = DIRECTION('',(1.,0.,-0.)); +#397806 = MANIFOLD_SOLID_BREP('',#397807); +#397807 = CLOSED_SHELL('',(#397808,#397850,#397881,#397914,#397945, + #397978,#398009,#398042,#398064,#398080)); +#397808 = ADVANCED_FACE('',(#397809),#397845,.T.); +#397809 = FACE_BOUND('',#397810,.F.); +#397810 = EDGE_LOOP('',(#397811,#397821,#397830,#397838)); +#397811 = ORIENTED_EDGE('',*,*,#397812,.T.); +#397812 = EDGE_CURVE('',#397813,#397815,#397817,.T.); +#397813 = VERTEX_POINT('',#397814); +#397814 = CARTESIAN_POINT('',(139.4,-116.525,0.)); +#397815 = VERTEX_POINT('',#397816); +#397816 = CARTESIAN_POINT('',(139.4,-116.525,-4.E-02)); +#397817 = LINE('',#397818,#397819); +#397818 = CARTESIAN_POINT('',(139.4,-116.525,0.)); +#397819 = VECTOR('',#397820,1.); +#397820 = DIRECTION('',(0.,0.,-1.)); +#397821 = ORIENTED_EDGE('',*,*,#397822,.T.); +#397822 = EDGE_CURVE('',#397815,#397823,#397825,.T.); +#397823 = VERTEX_POINT('',#397824); +#397824 = CARTESIAN_POINT('',(139.65,-116.275,-4.E-02)); +#397825 = CIRCLE('',#397826,0.249998959685); +#397826 = AXIS2_PLACEMENT_3D('',#397827,#397828,#397829); +#397827 = CARTESIAN_POINT('',(139.64999895968,-116.5249989596,-4.E-02)); +#397828 = DIRECTION('',(0.,0.,-1.)); +#397829 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#397830 = ORIENTED_EDGE('',*,*,#397831,.F.); +#397831 = EDGE_CURVE('',#397832,#397823,#397834,.T.); +#397832 = VERTEX_POINT('',#397833); +#397833 = CARTESIAN_POINT('',(139.65,-116.275,0.)); +#397834 = LINE('',#397835,#397836); +#397835 = CARTESIAN_POINT('',(139.65,-116.275,0.)); +#397836 = VECTOR('',#397837,1.); +#397837 = DIRECTION('',(0.,0.,-1.)); +#397838 = ORIENTED_EDGE('',*,*,#397839,.F.); +#397839 = EDGE_CURVE('',#397813,#397832,#397840,.T.); +#397840 = CIRCLE('',#397841,0.249998959685); +#397841 = AXIS2_PLACEMENT_3D('',#397842,#397843,#397844); +#397842 = CARTESIAN_POINT('',(139.64999895968,-116.5249989596,0.)); +#397843 = DIRECTION('',(0.,0.,-1.)); +#397844 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#397845 = CYLINDRICAL_SURFACE('',#397846,0.249998959685); +#397846 = AXIS2_PLACEMENT_3D('',#397847,#397848,#397849); +#397847 = CARTESIAN_POINT('',(139.64999895968,-116.5249989596,0.)); +#397848 = DIRECTION('',(-0.,-0.,1.)); +#397849 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#397850 = ADVANCED_FACE('',(#397851),#397876,.F.); +#397851 = FACE_BOUND('',#397852,.F.); +#397852 = EDGE_LOOP('',(#397853,#397854,#397862,#397870)); +#397853 = ORIENTED_EDGE('',*,*,#397831,.T.); +#397854 = ORIENTED_EDGE('',*,*,#397855,.T.); +#397855 = EDGE_CURVE('',#397823,#397856,#397858,.T.); +#397856 = VERTEX_POINT('',#397857); +#397857 = CARTESIAN_POINT('',(140.15,-116.275,-4.E-02)); +#397858 = LINE('',#397859,#397860); +#397859 = CARTESIAN_POINT('',(139.65,-116.275,-4.E-02)); +#397860 = VECTOR('',#397861,1.); +#397861 = DIRECTION('',(1.,0.,0.)); +#397862 = ORIENTED_EDGE('',*,*,#397863,.F.); +#397863 = EDGE_CURVE('',#397864,#397856,#397866,.T.); +#397864 = VERTEX_POINT('',#397865); +#397865 = CARTESIAN_POINT('',(140.15,-116.275,0.)); +#397866 = LINE('',#397867,#397868); +#397867 = CARTESIAN_POINT('',(140.15,-116.275,0.)); +#397868 = VECTOR('',#397869,1.); +#397869 = DIRECTION('',(0.,0.,-1.)); +#397870 = ORIENTED_EDGE('',*,*,#397871,.F.); +#397871 = EDGE_CURVE('',#397832,#397864,#397872,.T.); +#397872 = LINE('',#397873,#397874); +#397873 = CARTESIAN_POINT('',(139.65,-116.275,0.)); +#397874 = VECTOR('',#397875,1.); +#397875 = DIRECTION('',(1.,0.,0.)); +#397876 = PLANE('',#397877); +#397877 = AXIS2_PLACEMENT_3D('',#397878,#397879,#397880); +#397878 = CARTESIAN_POINT('',(139.65,-116.275,0.)); +#397879 = DIRECTION('',(0.,-1.,0.)); +#397880 = DIRECTION('',(1.,0.,0.)); +#397881 = ADVANCED_FACE('',(#397882),#397909,.T.); +#397882 = FACE_BOUND('',#397883,.F.); +#397883 = EDGE_LOOP('',(#397884,#397885,#397894,#397902)); +#397884 = ORIENTED_EDGE('',*,*,#397863,.T.); +#397885 = ORIENTED_EDGE('',*,*,#397886,.T.); +#397886 = EDGE_CURVE('',#397856,#397887,#397889,.T.); +#397887 = VERTEX_POINT('',#397888); +#397888 = CARTESIAN_POINT('',(140.4,-116.525,-4.E-02)); +#397889 = CIRCLE('',#397890,0.249998959685); +#397890 = AXIS2_PLACEMENT_3D('',#397891,#397892,#397893); +#397891 = CARTESIAN_POINT('',(140.15000104031,-116.5249989596,-4.E-02)); +#397892 = DIRECTION('',(0.,0.,-1.)); +#397893 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#397894 = ORIENTED_EDGE('',*,*,#397895,.F.); +#397895 = EDGE_CURVE('',#397896,#397887,#397898,.T.); +#397896 = VERTEX_POINT('',#397897); +#397897 = CARTESIAN_POINT('',(140.4,-116.525,0.)); +#397898 = LINE('',#397899,#397900); +#397899 = CARTESIAN_POINT('',(140.4,-116.525,0.)); +#397900 = VECTOR('',#397901,1.); +#397901 = DIRECTION('',(0.,0.,-1.)); +#397902 = ORIENTED_EDGE('',*,*,#397903,.F.); +#397903 = EDGE_CURVE('',#397864,#397896,#397904,.T.); +#397904 = CIRCLE('',#397905,0.249998959685); +#397905 = AXIS2_PLACEMENT_3D('',#397906,#397907,#397908); +#397906 = CARTESIAN_POINT('',(140.15000104031,-116.5249989596,0.)); +#397907 = DIRECTION('',(0.,0.,-1.)); +#397908 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#397909 = CYLINDRICAL_SURFACE('',#397910,0.249998959685); +#397910 = AXIS2_PLACEMENT_3D('',#397911,#397912,#397913); +#397911 = CARTESIAN_POINT('',(140.15000104031,-116.5249989596,0.)); +#397912 = DIRECTION('',(-0.,-0.,1.)); +#397913 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#397914 = ADVANCED_FACE('',(#397915),#397940,.F.); +#397915 = FACE_BOUND('',#397916,.F.); +#397916 = EDGE_LOOP('',(#397917,#397918,#397926,#397934)); +#397917 = ORIENTED_EDGE('',*,*,#397895,.T.); +#397918 = ORIENTED_EDGE('',*,*,#397919,.T.); +#397919 = EDGE_CURVE('',#397887,#397920,#397922,.T.); +#397920 = VERTEX_POINT('',#397921); +#397921 = CARTESIAN_POINT('',(140.4,-117.475,-4.E-02)); +#397922 = LINE('',#397923,#397924); +#397923 = CARTESIAN_POINT('',(140.4,-116.525,-4.E-02)); +#397924 = VECTOR('',#397925,1.); +#397925 = DIRECTION('',(0.,-1.,0.)); +#397926 = ORIENTED_EDGE('',*,*,#397927,.F.); +#397927 = EDGE_CURVE('',#397928,#397920,#397930,.T.); +#397928 = VERTEX_POINT('',#397929); +#397929 = CARTESIAN_POINT('',(140.4,-117.475,0.)); +#397930 = LINE('',#397931,#397932); +#397931 = CARTESIAN_POINT('',(140.4,-117.475,0.)); +#397932 = VECTOR('',#397933,1.); +#397933 = DIRECTION('',(0.,0.,-1.)); +#397934 = ORIENTED_EDGE('',*,*,#397935,.F.); +#397935 = EDGE_CURVE('',#397896,#397928,#397936,.T.); +#397936 = LINE('',#397937,#397938); +#397937 = CARTESIAN_POINT('',(140.4,-116.525,0.)); +#397938 = VECTOR('',#397939,1.); +#397939 = DIRECTION('',(0.,-1.,0.)); +#397940 = PLANE('',#397941); +#397941 = AXIS2_PLACEMENT_3D('',#397942,#397943,#397944); +#397942 = CARTESIAN_POINT('',(140.4,-116.525,0.)); +#397943 = DIRECTION('',(-1.,-0.,-0.)); +#397944 = DIRECTION('',(0.,-1.,0.)); +#397945 = ADVANCED_FACE('',(#397946),#397973,.T.); +#397946 = FACE_BOUND('',#397947,.F.); +#397947 = EDGE_LOOP('',(#397948,#397949,#397958,#397966)); +#397948 = ORIENTED_EDGE('',*,*,#397927,.T.); +#397949 = ORIENTED_EDGE('',*,*,#397950,.T.); +#397950 = EDGE_CURVE('',#397920,#397951,#397953,.T.); +#397951 = VERTEX_POINT('',#397952); +#397952 = CARTESIAN_POINT('',(140.15,-117.725,-4.E-02)); +#397953 = CIRCLE('',#397954,0.249998959685); +#397954 = AXIS2_PLACEMENT_3D('',#397955,#397956,#397957); +#397955 = CARTESIAN_POINT('',(140.15000104031,-117.4750010403,-4.E-02)); +#397956 = DIRECTION('',(0.,0.,-1.)); +#397957 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#397958 = ORIENTED_EDGE('',*,*,#397959,.F.); +#397959 = EDGE_CURVE('',#397960,#397951,#397962,.T.); +#397960 = VERTEX_POINT('',#397961); +#397961 = CARTESIAN_POINT('',(140.15,-117.725,0.)); +#397962 = LINE('',#397963,#397964); +#397963 = CARTESIAN_POINT('',(140.15,-117.725,0.)); +#397964 = VECTOR('',#397965,1.); +#397965 = DIRECTION('',(0.,0.,-1.)); +#397966 = ORIENTED_EDGE('',*,*,#397967,.F.); +#397967 = EDGE_CURVE('',#397928,#397960,#397968,.T.); +#397968 = CIRCLE('',#397969,0.249998959685); +#397969 = AXIS2_PLACEMENT_3D('',#397970,#397971,#397972); +#397970 = CARTESIAN_POINT('',(140.15000104031,-117.4750010403,0.)); +#397971 = DIRECTION('',(0.,0.,-1.)); +#397972 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#397973 = CYLINDRICAL_SURFACE('',#397974,0.249998959685); +#397974 = AXIS2_PLACEMENT_3D('',#397975,#397976,#397977); +#397975 = CARTESIAN_POINT('',(140.15000104031,-117.4750010403,0.)); +#397976 = DIRECTION('',(-0.,-0.,1.)); +#397977 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#397978 = ADVANCED_FACE('',(#397979),#398004,.F.); +#397979 = FACE_BOUND('',#397980,.F.); +#397980 = EDGE_LOOP('',(#397981,#397982,#397990,#397998)); +#397981 = ORIENTED_EDGE('',*,*,#397959,.T.); +#397982 = ORIENTED_EDGE('',*,*,#397983,.T.); +#397983 = EDGE_CURVE('',#397951,#397984,#397986,.T.); +#397984 = VERTEX_POINT('',#397985); +#397985 = CARTESIAN_POINT('',(139.65,-117.725,-4.E-02)); +#397986 = LINE('',#397987,#397988); +#397987 = CARTESIAN_POINT('',(140.15,-117.725,-4.E-02)); +#397988 = VECTOR('',#397989,1.); +#397989 = DIRECTION('',(-1.,0.,0.)); +#397990 = ORIENTED_EDGE('',*,*,#397991,.F.); +#397991 = EDGE_CURVE('',#397992,#397984,#397994,.T.); +#397992 = VERTEX_POINT('',#397993); +#397993 = CARTESIAN_POINT('',(139.65,-117.725,0.)); +#397994 = LINE('',#397995,#397996); +#397995 = CARTESIAN_POINT('',(139.65,-117.725,0.)); +#397996 = VECTOR('',#397997,1.); +#397997 = DIRECTION('',(0.,0.,-1.)); +#397998 = ORIENTED_EDGE('',*,*,#397999,.F.); +#397999 = EDGE_CURVE('',#397960,#397992,#398000,.T.); +#398000 = LINE('',#398001,#398002); +#398001 = CARTESIAN_POINT('',(140.15,-117.725,0.)); +#398002 = VECTOR('',#398003,1.); +#398003 = DIRECTION('',(-1.,0.,0.)); +#398004 = PLANE('',#398005); +#398005 = AXIS2_PLACEMENT_3D('',#398006,#398007,#398008); +#398006 = CARTESIAN_POINT('',(140.15,-117.725,0.)); +#398007 = DIRECTION('',(0.,1.,0.)); +#398008 = DIRECTION('',(-1.,0.,0.)); +#398009 = ADVANCED_FACE('',(#398010),#398037,.T.); +#398010 = FACE_BOUND('',#398011,.F.); +#398011 = EDGE_LOOP('',(#398012,#398013,#398022,#398030)); +#398012 = ORIENTED_EDGE('',*,*,#397991,.T.); +#398013 = ORIENTED_EDGE('',*,*,#398014,.T.); +#398014 = EDGE_CURVE('',#397984,#398015,#398017,.T.); +#398015 = VERTEX_POINT('',#398016); +#398016 = CARTESIAN_POINT('',(139.4,-117.475,-4.E-02)); +#398017 = CIRCLE('',#398018,0.249998959685); +#398018 = AXIS2_PLACEMENT_3D('',#398019,#398020,#398021); +#398019 = CARTESIAN_POINT('',(139.64999895968,-117.4750010403,-4.E-02)); +#398020 = DIRECTION('',(0.,0.,-1.)); +#398021 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#398022 = ORIENTED_EDGE('',*,*,#398023,.F.); +#398023 = EDGE_CURVE('',#398024,#398015,#398026,.T.); +#398024 = VERTEX_POINT('',#398025); +#398025 = CARTESIAN_POINT('',(139.4,-117.475,0.)); +#398026 = LINE('',#398027,#398028); +#398027 = CARTESIAN_POINT('',(139.4,-117.475,0.)); +#398028 = VECTOR('',#398029,1.); +#398029 = DIRECTION('',(0.,0.,-1.)); +#398030 = ORIENTED_EDGE('',*,*,#398031,.F.); +#398031 = EDGE_CURVE('',#397992,#398024,#398032,.T.); +#398032 = CIRCLE('',#398033,0.249998959685); +#398033 = AXIS2_PLACEMENT_3D('',#398034,#398035,#398036); +#398034 = CARTESIAN_POINT('',(139.64999895968,-117.4750010403,0.)); +#398035 = DIRECTION('',(0.,0.,-1.)); +#398036 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#398037 = CYLINDRICAL_SURFACE('',#398038,0.249998959685); +#398038 = AXIS2_PLACEMENT_3D('',#398039,#398040,#398041); +#398039 = CARTESIAN_POINT('',(139.64999895968,-117.4750010403,0.)); +#398040 = DIRECTION('',(-0.,-0.,1.)); +#398041 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#398042 = ADVANCED_FACE('',(#398043),#398059,.F.); +#398043 = FACE_BOUND('',#398044,.F.); +#398044 = EDGE_LOOP('',(#398045,#398046,#398052,#398053)); +#398045 = ORIENTED_EDGE('',*,*,#398023,.T.); +#398046 = ORIENTED_EDGE('',*,*,#398047,.T.); +#398047 = EDGE_CURVE('',#398015,#397815,#398048,.T.); +#398048 = LINE('',#398049,#398050); +#398049 = CARTESIAN_POINT('',(139.4,-117.475,-4.E-02)); +#398050 = VECTOR('',#398051,1.); +#398051 = DIRECTION('',(0.,1.,0.)); +#398052 = ORIENTED_EDGE('',*,*,#397812,.F.); +#398053 = ORIENTED_EDGE('',*,*,#398054,.F.); +#398054 = EDGE_CURVE('',#398024,#397813,#398055,.T.); +#398055 = LINE('',#398056,#398057); +#398056 = CARTESIAN_POINT('',(139.4,-117.475,0.)); +#398057 = VECTOR('',#398058,1.); +#398058 = DIRECTION('',(0.,1.,0.)); +#398059 = PLANE('',#398060); +#398060 = AXIS2_PLACEMENT_3D('',#398061,#398062,#398063); +#398061 = CARTESIAN_POINT('',(139.4,-117.475,0.)); +#398062 = DIRECTION('',(1.,-0.,0.)); +#398063 = DIRECTION('',(0.,1.,0.)); +#398064 = ADVANCED_FACE('',(#398065),#398075,.F.); +#398065 = FACE_BOUND('',#398066,.F.); +#398066 = EDGE_LOOP('',(#398067,#398068,#398069,#398070,#398071,#398072, + #398073,#398074)); +#398067 = ORIENTED_EDGE('',*,*,#397839,.T.); +#398068 = ORIENTED_EDGE('',*,*,#397871,.T.); +#398069 = ORIENTED_EDGE('',*,*,#397903,.T.); +#398070 = ORIENTED_EDGE('',*,*,#397935,.T.); +#398071 = ORIENTED_EDGE('',*,*,#397967,.T.); +#398072 = ORIENTED_EDGE('',*,*,#397999,.T.); +#398073 = ORIENTED_EDGE('',*,*,#398031,.T.); +#398074 = ORIENTED_EDGE('',*,*,#398054,.T.); +#398075 = PLANE('',#398076); +#398076 = AXIS2_PLACEMENT_3D('',#398077,#398078,#398079); +#398077 = CARTESIAN_POINT('',(0.,0.,0.)); +#398078 = DIRECTION('',(-0.,-0.,-1.)); +#398079 = DIRECTION('',(-1.,0.,0.)); +#398080 = ADVANCED_FACE('',(#398081),#398091,.T.); +#398081 = FACE_BOUND('',#398082,.T.); +#398082 = EDGE_LOOP('',(#398083,#398084,#398085,#398086,#398087,#398088, + #398089,#398090)); +#398083 = ORIENTED_EDGE('',*,*,#397822,.T.); +#398084 = ORIENTED_EDGE('',*,*,#397855,.T.); +#398085 = ORIENTED_EDGE('',*,*,#397886,.T.); +#398086 = ORIENTED_EDGE('',*,*,#397919,.T.); +#398087 = ORIENTED_EDGE('',*,*,#397950,.T.); +#398088 = ORIENTED_EDGE('',*,*,#397983,.T.); +#398089 = ORIENTED_EDGE('',*,*,#398014,.T.); +#398090 = ORIENTED_EDGE('',*,*,#398047,.T.); +#398091 = PLANE('',#398092); +#398092 = AXIS2_PLACEMENT_3D('',#398093,#398094,#398095); +#398093 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#398094 = DIRECTION('',(-0.,-0.,-1.)); +#398095 = DIRECTION('',(-1.,0.,0.)); +#398096 = MANIFOLD_SOLID_BREP('',#398097); +#398097 = CLOSED_SHELL('',(#398098,#398140,#398171,#398204,#398235, + #398268,#398299,#398332,#398354,#398370)); +#398098 = ADVANCED_FACE('',(#398099),#398135,.T.); +#398099 = FACE_BOUND('',#398100,.F.); +#398100 = EDGE_LOOP('',(#398101,#398111,#398120,#398128)); +#398101 = ORIENTED_EDGE('',*,*,#398102,.T.); +#398102 = EDGE_CURVE('',#398103,#398105,#398107,.T.); +#398103 = VERTEX_POINT('',#398104); +#398104 = CARTESIAN_POINT('',(137.175,-157.0625,0.)); +#398105 = VERTEX_POINT('',#398106); +#398106 = CARTESIAN_POINT('',(137.175,-157.0625,-4.E-02)); +#398107 = LINE('',#398108,#398109); +#398108 = CARTESIAN_POINT('',(137.175,-157.0625,0.)); +#398109 = VECTOR('',#398110,1.); +#398110 = DIRECTION('',(0.,0.,-1.)); +#398111 = ORIENTED_EDGE('',*,*,#398112,.T.); +#398112 = EDGE_CURVE('',#398105,#398113,#398115,.T.); +#398113 = VERTEX_POINT('',#398114); +#398114 = CARTESIAN_POINT('',(137.2875,-156.95,-4.E-02)); +#398115 = CIRCLE('',#398116,0.112498336922); +#398116 = AXIS2_PLACEMENT_3D('',#398117,#398118,#398119); +#398117 = CARTESIAN_POINT('',(137.28749833691,-157.0624983369,-4.E-02)); +#398118 = DIRECTION('',(0.,0.,-1.)); +#398119 = DIRECTION('',(-0.999999999891,-1.478324218215E-05,-0.)); +#398120 = ORIENTED_EDGE('',*,*,#398121,.F.); +#398121 = EDGE_CURVE('',#398122,#398113,#398124,.T.); +#398122 = VERTEX_POINT('',#398123); +#398123 = CARTESIAN_POINT('',(137.2875,-156.95,0.)); +#398124 = LINE('',#398125,#398126); +#398125 = CARTESIAN_POINT('',(137.2875,-156.95,0.)); +#398126 = VECTOR('',#398127,1.); +#398127 = DIRECTION('',(0.,0.,-1.)); +#398128 = ORIENTED_EDGE('',*,*,#398129,.F.); +#398129 = EDGE_CURVE('',#398103,#398122,#398130,.T.); +#398130 = CIRCLE('',#398131,0.112498336922); +#398131 = AXIS2_PLACEMENT_3D('',#398132,#398133,#398134); +#398132 = CARTESIAN_POINT('',(137.28749833691,-157.0624983369,0.)); +#398133 = DIRECTION('',(0.,0.,-1.)); +#398134 = DIRECTION('',(-0.999999999891,-1.478324218215E-05,-0.)); +#398135 = CYLINDRICAL_SURFACE('',#398136,0.112498336922); +#398136 = AXIS2_PLACEMENT_3D('',#398137,#398138,#398139); +#398137 = CARTESIAN_POINT('',(137.28749833691,-157.0624983369,0.)); +#398138 = DIRECTION('',(-0.,-0.,1.)); +#398139 = DIRECTION('',(-0.999999999891,-1.478324218215E-05,-0.)); +#398140 = ADVANCED_FACE('',(#398141),#398166,.F.); +#398141 = FACE_BOUND('',#398142,.F.); +#398142 = EDGE_LOOP('',(#398143,#398144,#398152,#398160)); +#398143 = ORIENTED_EDGE('',*,*,#398121,.T.); +#398144 = ORIENTED_EDGE('',*,*,#398145,.T.); +#398145 = EDGE_CURVE('',#398113,#398146,#398148,.T.); +#398146 = VERTEX_POINT('',#398147); +#398147 = CARTESIAN_POINT('',(137.5125,-156.95,-4.E-02)); +#398148 = LINE('',#398149,#398150); +#398149 = CARTESIAN_POINT('',(137.2875,-156.95,-4.E-02)); +#398150 = VECTOR('',#398151,1.); +#398151 = DIRECTION('',(1.,0.,0.)); +#398152 = ORIENTED_EDGE('',*,*,#398153,.F.); +#398153 = EDGE_CURVE('',#398154,#398146,#398156,.T.); +#398154 = VERTEX_POINT('',#398155); +#398155 = CARTESIAN_POINT('',(137.5125,-156.95,0.)); +#398156 = LINE('',#398157,#398158); +#398157 = CARTESIAN_POINT('',(137.5125,-156.95,0.)); +#398158 = VECTOR('',#398159,1.); +#398159 = DIRECTION('',(0.,0.,-1.)); +#398160 = ORIENTED_EDGE('',*,*,#398161,.F.); +#398161 = EDGE_CURVE('',#398122,#398154,#398162,.T.); +#398162 = LINE('',#398163,#398164); +#398163 = CARTESIAN_POINT('',(137.2875,-156.95,0.)); +#398164 = VECTOR('',#398165,1.); +#398165 = DIRECTION('',(1.,0.,0.)); +#398166 = PLANE('',#398167); +#398167 = AXIS2_PLACEMENT_3D('',#398168,#398169,#398170); +#398168 = CARTESIAN_POINT('',(137.2875,-156.95,0.)); +#398169 = DIRECTION('',(0.,-1.,0.)); +#398170 = DIRECTION('',(1.,0.,0.)); +#398171 = ADVANCED_FACE('',(#398172),#398199,.T.); +#398172 = FACE_BOUND('',#398173,.F.); +#398173 = EDGE_LOOP('',(#398174,#398175,#398184,#398192)); +#398174 = ORIENTED_EDGE('',*,*,#398153,.T.); +#398175 = ORIENTED_EDGE('',*,*,#398176,.T.); +#398176 = EDGE_CURVE('',#398146,#398177,#398179,.T.); +#398177 = VERTEX_POINT('',#398178); +#398178 = CARTESIAN_POINT('',(137.625,-157.0625,-4.E-02)); +#398179 = CIRCLE('',#398180,0.112498336922); +#398180 = AXIS2_PLACEMENT_3D('',#398181,#398182,#398183); +#398181 = CARTESIAN_POINT('',(137.51250166309,-157.0624983369,-4.E-02)); +#398182 = DIRECTION('',(0.,0.,-1.)); +#398183 = DIRECTION('',(-1.478324243479E-05,0.999999999891,0.)); +#398184 = ORIENTED_EDGE('',*,*,#398185,.F.); +#398185 = EDGE_CURVE('',#398186,#398177,#398188,.T.); +#398186 = VERTEX_POINT('',#398187); +#398187 = CARTESIAN_POINT('',(137.625,-157.0625,0.)); +#398188 = LINE('',#398189,#398190); +#398189 = CARTESIAN_POINT('',(137.625,-157.0625,0.)); +#398190 = VECTOR('',#398191,1.); +#398191 = DIRECTION('',(0.,0.,-1.)); +#398192 = ORIENTED_EDGE('',*,*,#398193,.F.); +#398193 = EDGE_CURVE('',#398154,#398186,#398194,.T.); +#398194 = CIRCLE('',#398195,0.112498336922); +#398195 = AXIS2_PLACEMENT_3D('',#398196,#398197,#398198); +#398196 = CARTESIAN_POINT('',(137.51250166309,-157.0624983369,0.)); +#398197 = DIRECTION('',(0.,0.,-1.)); +#398198 = DIRECTION('',(-1.478324243479E-05,0.999999999891,0.)); +#398199 = CYLINDRICAL_SURFACE('',#398200,0.112498336922); +#398200 = AXIS2_PLACEMENT_3D('',#398201,#398202,#398203); +#398201 = CARTESIAN_POINT('',(137.51250166309,-157.0624983369,0.)); +#398202 = DIRECTION('',(-0.,-0.,1.)); +#398203 = DIRECTION('',(-1.478324243479E-05,0.999999999891,0.)); +#398204 = ADVANCED_FACE('',(#398205),#398230,.F.); +#398205 = FACE_BOUND('',#398206,.F.); +#398206 = EDGE_LOOP('',(#398207,#398208,#398216,#398224)); +#398207 = ORIENTED_EDGE('',*,*,#398185,.T.); +#398208 = ORIENTED_EDGE('',*,*,#398209,.T.); +#398209 = EDGE_CURVE('',#398177,#398210,#398212,.T.); +#398210 = VERTEX_POINT('',#398211); +#398211 = CARTESIAN_POINT('',(137.625,-157.4375,-4.E-02)); +#398212 = LINE('',#398213,#398214); +#398213 = CARTESIAN_POINT('',(137.625,-157.0625,-4.E-02)); +#398214 = VECTOR('',#398215,1.); +#398215 = DIRECTION('',(0.,-1.,0.)); +#398216 = ORIENTED_EDGE('',*,*,#398217,.F.); +#398217 = EDGE_CURVE('',#398218,#398210,#398220,.T.); +#398218 = VERTEX_POINT('',#398219); +#398219 = CARTESIAN_POINT('',(137.625,-157.4375,0.)); +#398220 = LINE('',#398221,#398222); +#398221 = CARTESIAN_POINT('',(137.625,-157.4375,0.)); +#398222 = VECTOR('',#398223,1.); +#398223 = DIRECTION('',(0.,0.,-1.)); +#398224 = ORIENTED_EDGE('',*,*,#398225,.F.); +#398225 = EDGE_CURVE('',#398186,#398218,#398226,.T.); +#398226 = LINE('',#398227,#398228); +#398227 = CARTESIAN_POINT('',(137.625,-157.0625,0.)); +#398228 = VECTOR('',#398229,1.); +#398229 = DIRECTION('',(0.,-1.,0.)); +#398230 = PLANE('',#398231); +#398231 = AXIS2_PLACEMENT_3D('',#398232,#398233,#398234); +#398232 = CARTESIAN_POINT('',(137.625,-157.0625,0.)); +#398233 = DIRECTION('',(-1.,-0.,-0.)); +#398234 = DIRECTION('',(0.,-1.,0.)); +#398235 = ADVANCED_FACE('',(#398236),#398263,.T.); +#398236 = FACE_BOUND('',#398237,.F.); +#398237 = EDGE_LOOP('',(#398238,#398239,#398248,#398256)); +#398238 = ORIENTED_EDGE('',*,*,#398217,.T.); +#398239 = ORIENTED_EDGE('',*,*,#398240,.T.); +#398240 = EDGE_CURVE('',#398210,#398241,#398243,.T.); +#398241 = VERTEX_POINT('',#398242); +#398242 = CARTESIAN_POINT('',(137.5125,-157.55,-4.E-02)); +#398243 = CIRCLE('',#398244,0.112498336922); +#398244 = AXIS2_PLACEMENT_3D('',#398245,#398246,#398247); +#398245 = CARTESIAN_POINT('',(137.51250166309,-157.437501663,-4.E-02)); +#398246 = DIRECTION('',(0.,0.,-1.)); +#398247 = DIRECTION('',(0.999999999891,1.478324243479E-05,0.)); +#398248 = ORIENTED_EDGE('',*,*,#398249,.F.); +#398249 = EDGE_CURVE('',#398250,#398241,#398252,.T.); +#398250 = VERTEX_POINT('',#398251); +#398251 = CARTESIAN_POINT('',(137.5125,-157.55,0.)); +#398252 = LINE('',#398253,#398254); +#398253 = CARTESIAN_POINT('',(137.5125,-157.55,0.)); +#398254 = VECTOR('',#398255,1.); +#398255 = DIRECTION('',(0.,0.,-1.)); +#398256 = ORIENTED_EDGE('',*,*,#398257,.F.); +#398257 = EDGE_CURVE('',#398218,#398250,#398258,.T.); +#398258 = CIRCLE('',#398259,0.112498336922); +#398259 = AXIS2_PLACEMENT_3D('',#398260,#398261,#398262); +#398260 = CARTESIAN_POINT('',(137.51250166309,-157.437501663,0.)); +#398261 = DIRECTION('',(0.,0.,-1.)); +#398262 = DIRECTION('',(0.999999999891,1.478324243479E-05,0.)); +#398263 = CYLINDRICAL_SURFACE('',#398264,0.112498336922); +#398264 = AXIS2_PLACEMENT_3D('',#398265,#398266,#398267); +#398265 = CARTESIAN_POINT('',(137.51250166309,-157.437501663,0.)); +#398266 = DIRECTION('',(-0.,-0.,1.)); +#398267 = DIRECTION('',(0.999999999891,1.478324243479E-05,0.)); +#398268 = ADVANCED_FACE('',(#398269),#398294,.F.); +#398269 = FACE_BOUND('',#398270,.F.); +#398270 = EDGE_LOOP('',(#398271,#398272,#398280,#398288)); +#398271 = ORIENTED_EDGE('',*,*,#398249,.T.); +#398272 = ORIENTED_EDGE('',*,*,#398273,.T.); +#398273 = EDGE_CURVE('',#398241,#398274,#398276,.T.); +#398274 = VERTEX_POINT('',#398275); +#398275 = CARTESIAN_POINT('',(137.2875,-157.55,-4.E-02)); +#398276 = LINE('',#398277,#398278); +#398277 = CARTESIAN_POINT('',(137.5125,-157.55,-4.E-02)); +#398278 = VECTOR('',#398279,1.); +#398279 = DIRECTION('',(-1.,0.,0.)); +#398280 = ORIENTED_EDGE('',*,*,#398281,.F.); +#398281 = EDGE_CURVE('',#398282,#398274,#398284,.T.); +#398282 = VERTEX_POINT('',#398283); +#398283 = CARTESIAN_POINT('',(137.2875,-157.55,0.)); +#398284 = LINE('',#398285,#398286); +#398285 = CARTESIAN_POINT('',(137.2875,-157.55,0.)); +#398286 = VECTOR('',#398287,1.); +#398287 = DIRECTION('',(0.,0.,-1.)); +#398288 = ORIENTED_EDGE('',*,*,#398289,.F.); +#398289 = EDGE_CURVE('',#398250,#398282,#398290,.T.); +#398290 = LINE('',#398291,#398292); +#398291 = CARTESIAN_POINT('',(137.5125,-157.55,0.)); +#398292 = VECTOR('',#398293,1.); +#398293 = DIRECTION('',(-1.,0.,0.)); +#398294 = PLANE('',#398295); +#398295 = AXIS2_PLACEMENT_3D('',#398296,#398297,#398298); +#398296 = CARTESIAN_POINT('',(137.5125,-157.55,0.)); +#398297 = DIRECTION('',(0.,1.,0.)); +#398298 = DIRECTION('',(-1.,0.,0.)); +#398299 = ADVANCED_FACE('',(#398300),#398327,.T.); +#398300 = FACE_BOUND('',#398301,.F.); +#398301 = EDGE_LOOP('',(#398302,#398303,#398312,#398320)); +#398302 = ORIENTED_EDGE('',*,*,#398281,.T.); +#398303 = ORIENTED_EDGE('',*,*,#398304,.T.); +#398304 = EDGE_CURVE('',#398274,#398305,#398307,.T.); +#398305 = VERTEX_POINT('',#398306); +#398306 = CARTESIAN_POINT('',(137.175,-157.4375,-4.E-02)); +#398307 = CIRCLE('',#398308,0.112498336922); +#398308 = AXIS2_PLACEMENT_3D('',#398309,#398310,#398311); +#398309 = CARTESIAN_POINT('',(137.28749833691,-157.437501663,-4.E-02)); +#398310 = DIRECTION('',(0.,0.,-1.)); +#398311 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#398312 = ORIENTED_EDGE('',*,*,#398313,.F.); +#398313 = EDGE_CURVE('',#398314,#398305,#398316,.T.); +#398314 = VERTEX_POINT('',#398315); +#398315 = CARTESIAN_POINT('',(137.175,-157.4375,0.)); +#398316 = LINE('',#398317,#398318); +#398317 = CARTESIAN_POINT('',(137.175,-157.4375,0.)); +#398318 = VECTOR('',#398319,1.); +#398319 = DIRECTION('',(0.,0.,-1.)); +#398320 = ORIENTED_EDGE('',*,*,#398321,.F.); +#398321 = EDGE_CURVE('',#398282,#398314,#398322,.T.); +#398322 = CIRCLE('',#398323,0.112498336922); +#398323 = AXIS2_PLACEMENT_3D('',#398324,#398325,#398326); +#398324 = CARTESIAN_POINT('',(137.28749833691,-157.437501663,0.)); +#398325 = DIRECTION('',(0.,0.,-1.)); +#398326 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#398327 = CYLINDRICAL_SURFACE('',#398328,0.112498336922); +#398328 = AXIS2_PLACEMENT_3D('',#398329,#398330,#398331); +#398329 = CARTESIAN_POINT('',(137.28749833691,-157.437501663,0.)); +#398330 = DIRECTION('',(-0.,-0.,1.)); +#398331 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#398332 = ADVANCED_FACE('',(#398333),#398349,.F.); +#398333 = FACE_BOUND('',#398334,.F.); +#398334 = EDGE_LOOP('',(#398335,#398336,#398342,#398343)); +#398335 = ORIENTED_EDGE('',*,*,#398313,.T.); +#398336 = ORIENTED_EDGE('',*,*,#398337,.T.); +#398337 = EDGE_CURVE('',#398305,#398105,#398338,.T.); +#398338 = LINE('',#398339,#398340); +#398339 = CARTESIAN_POINT('',(137.175,-157.4375,-4.E-02)); +#398340 = VECTOR('',#398341,1.); +#398341 = DIRECTION('',(0.,1.,0.)); +#398342 = ORIENTED_EDGE('',*,*,#398102,.F.); +#398343 = ORIENTED_EDGE('',*,*,#398344,.F.); +#398344 = EDGE_CURVE('',#398314,#398103,#398345,.T.); +#398345 = LINE('',#398346,#398347); +#398346 = CARTESIAN_POINT('',(137.175,-157.4375,0.)); +#398347 = VECTOR('',#398348,1.); +#398348 = DIRECTION('',(0.,1.,0.)); +#398349 = PLANE('',#398350); +#398350 = AXIS2_PLACEMENT_3D('',#398351,#398352,#398353); +#398351 = CARTESIAN_POINT('',(137.175,-157.4375,0.)); +#398352 = DIRECTION('',(1.,-0.,0.)); +#398353 = DIRECTION('',(0.,1.,0.)); +#398354 = ADVANCED_FACE('',(#398355),#398365,.F.); +#398355 = FACE_BOUND('',#398356,.F.); +#398356 = EDGE_LOOP('',(#398357,#398358,#398359,#398360,#398361,#398362, + #398363,#398364)); +#398357 = ORIENTED_EDGE('',*,*,#398129,.T.); +#398358 = ORIENTED_EDGE('',*,*,#398161,.T.); +#398359 = ORIENTED_EDGE('',*,*,#398193,.T.); +#398360 = ORIENTED_EDGE('',*,*,#398225,.T.); +#398361 = ORIENTED_EDGE('',*,*,#398257,.T.); +#398362 = ORIENTED_EDGE('',*,*,#398289,.T.); +#398363 = ORIENTED_EDGE('',*,*,#398321,.T.); +#398364 = ORIENTED_EDGE('',*,*,#398344,.T.); +#398365 = PLANE('',#398366); +#398366 = AXIS2_PLACEMENT_3D('',#398367,#398368,#398369); +#398367 = CARTESIAN_POINT('',(0.,0.,0.)); +#398368 = DIRECTION('',(-0.,-0.,-1.)); +#398369 = DIRECTION('',(-1.,0.,0.)); +#398370 = ADVANCED_FACE('',(#398371),#398381,.T.); +#398371 = FACE_BOUND('',#398372,.T.); +#398372 = EDGE_LOOP('',(#398373,#398374,#398375,#398376,#398377,#398378, + #398379,#398380)); +#398373 = ORIENTED_EDGE('',*,*,#398112,.T.); +#398374 = ORIENTED_EDGE('',*,*,#398145,.T.); +#398375 = ORIENTED_EDGE('',*,*,#398176,.T.); +#398376 = ORIENTED_EDGE('',*,*,#398209,.T.); +#398377 = ORIENTED_EDGE('',*,*,#398240,.T.); +#398378 = ORIENTED_EDGE('',*,*,#398273,.T.); +#398379 = ORIENTED_EDGE('',*,*,#398304,.T.); +#398380 = ORIENTED_EDGE('',*,*,#398337,.T.); +#398381 = PLANE('',#398382); +#398382 = AXIS2_PLACEMENT_3D('',#398383,#398384,#398385); +#398383 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#398384 = DIRECTION('',(-0.,-0.,-1.)); +#398385 = DIRECTION('',(-1.,0.,0.)); +#398386 = MANIFOLD_SOLID_BREP('',#398387); +#398387 = CLOSED_SHELL('',(#398388,#398430,#398461,#398492,#398521, + #398550,#398562)); +#398388 = ADVANCED_FACE('',(#398389),#398425,.T.); +#398389 = FACE_BOUND('',#398390,.T.); +#398390 = EDGE_LOOP('',(#398391,#398401,#398410,#398418)); +#398391 = ORIENTED_EDGE('',*,*,#398392,.T.); +#398392 = EDGE_CURVE('',#398393,#398395,#398397,.T.); +#398393 = VERTEX_POINT('',#398394); +#398394 = CARTESIAN_POINT('',(151.1,-77.775,1.51)); +#398395 = VERTEX_POINT('',#398396); +#398396 = CARTESIAN_POINT('',(151.1,-77.775,1.55)); +#398397 = LINE('',#398398,#398399); +#398398 = CARTESIAN_POINT('',(151.1,-77.775,1.51)); +#398399 = VECTOR('',#398400,1.); +#398400 = DIRECTION('',(0.,0.,1.)); +#398401 = ORIENTED_EDGE('',*,*,#398402,.T.); +#398402 = EDGE_CURVE('',#398395,#398403,#398405,.T.); +#398403 = VERTEX_POINT('',#398404); +#398404 = CARTESIAN_POINT('',(149.9,-77.775,1.55)); +#398405 = CIRCLE('',#398406,0.6); +#398406 = AXIS2_PLACEMENT_3D('',#398407,#398408,#398409); +#398407 = CARTESIAN_POINT('',(150.5,-77.77500012065,1.55)); +#398408 = DIRECTION('',(0.,0.,-1.)); +#398409 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398410 = ORIENTED_EDGE('',*,*,#398411,.F.); +#398411 = EDGE_CURVE('',#398412,#398403,#398414,.T.); +#398412 = VERTEX_POINT('',#398413); +#398413 = CARTESIAN_POINT('',(149.9,-77.775,1.51)); +#398414 = LINE('',#398415,#398416); +#398415 = CARTESIAN_POINT('',(149.9,-77.775,1.51)); +#398416 = VECTOR('',#398417,1.); +#398417 = DIRECTION('',(0.,0.,1.)); +#398418 = ORIENTED_EDGE('',*,*,#398419,.F.); +#398419 = EDGE_CURVE('',#398393,#398412,#398420,.T.); +#398420 = CIRCLE('',#398421,0.6); +#398421 = AXIS2_PLACEMENT_3D('',#398422,#398423,#398424); +#398422 = CARTESIAN_POINT('',(150.5,-77.77500012065,1.51)); +#398423 = DIRECTION('',(0.,0.,-1.)); +#398424 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398425 = CYLINDRICAL_SURFACE('',#398426,0.6); +#398426 = AXIS2_PLACEMENT_3D('',#398427,#398428,#398429); +#398427 = CARTESIAN_POINT('',(150.5,-77.77500012065,1.51)); +#398428 = DIRECTION('',(0.,0.,-1.)); +#398429 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398430 = ADVANCED_FACE('',(#398431),#398456,.T.); +#398431 = FACE_BOUND('',#398432,.T.); +#398432 = EDGE_LOOP('',(#398433,#398443,#398449,#398450)); +#398433 = ORIENTED_EDGE('',*,*,#398434,.T.); +#398434 = EDGE_CURVE('',#398435,#398437,#398439,.T.); +#398435 = VERTEX_POINT('',#398436); +#398436 = CARTESIAN_POINT('',(151.1,-77.225,1.51)); +#398437 = VERTEX_POINT('',#398438); +#398438 = CARTESIAN_POINT('',(151.1,-77.225,1.55)); +#398439 = LINE('',#398440,#398441); +#398440 = CARTESIAN_POINT('',(151.1,-77.225,1.51)); +#398441 = VECTOR('',#398442,1.); +#398442 = DIRECTION('',(0.,0.,1.)); +#398443 = ORIENTED_EDGE('',*,*,#398444,.T.); +#398444 = EDGE_CURVE('',#398437,#398395,#398445,.T.); +#398445 = LINE('',#398446,#398447); +#398446 = CARTESIAN_POINT('',(151.1,-77.225,1.55)); +#398447 = VECTOR('',#398448,1.); +#398448 = DIRECTION('',(0.,-1.,0.)); +#398449 = ORIENTED_EDGE('',*,*,#398392,.F.); +#398450 = ORIENTED_EDGE('',*,*,#398451,.F.); +#398451 = EDGE_CURVE('',#398435,#398393,#398452,.T.); +#398452 = LINE('',#398453,#398454); +#398453 = CARTESIAN_POINT('',(151.1,-77.225,1.51)); +#398454 = VECTOR('',#398455,1.); +#398455 = DIRECTION('',(0.,-1.,0.)); +#398456 = PLANE('',#398457); +#398457 = AXIS2_PLACEMENT_3D('',#398458,#398459,#398460); +#398458 = CARTESIAN_POINT('',(151.1,-77.225,1.51)); +#398459 = DIRECTION('',(1.,0.,-0.)); +#398460 = DIRECTION('',(0.,-1.,0.)); +#398461 = ADVANCED_FACE('',(#398462),#398487,.T.); +#398462 = FACE_BOUND('',#398463,.T.); +#398463 = EDGE_LOOP('',(#398464,#398465,#398473,#398481)); +#398464 = ORIENTED_EDGE('',*,*,#398411,.T.); +#398465 = ORIENTED_EDGE('',*,*,#398466,.T.); +#398466 = EDGE_CURVE('',#398403,#398467,#398469,.T.); +#398467 = VERTEX_POINT('',#398468); +#398468 = CARTESIAN_POINT('',(149.9,-77.225,1.55)); +#398469 = LINE('',#398470,#398471); +#398470 = CARTESIAN_POINT('',(149.9,-77.775,1.55)); +#398471 = VECTOR('',#398472,1.); +#398472 = DIRECTION('',(0.,1.,0.)); +#398473 = ORIENTED_EDGE('',*,*,#398474,.F.); +#398474 = EDGE_CURVE('',#398475,#398467,#398477,.T.); +#398475 = VERTEX_POINT('',#398476); +#398476 = CARTESIAN_POINT('',(149.9,-77.225,1.51)); +#398477 = LINE('',#398478,#398479); +#398478 = CARTESIAN_POINT('',(149.9,-77.225,1.51)); +#398479 = VECTOR('',#398480,1.); +#398480 = DIRECTION('',(0.,0.,1.)); +#398481 = ORIENTED_EDGE('',*,*,#398482,.F.); +#398482 = EDGE_CURVE('',#398412,#398475,#398483,.T.); +#398483 = LINE('',#398484,#398485); +#398484 = CARTESIAN_POINT('',(149.9,-77.775,1.51)); +#398485 = VECTOR('',#398486,1.); +#398486 = DIRECTION('',(0.,1.,0.)); +#398487 = PLANE('',#398488); +#398488 = AXIS2_PLACEMENT_3D('',#398489,#398490,#398491); +#398489 = CARTESIAN_POINT('',(149.9,-77.775,1.51)); +#398490 = DIRECTION('',(-1.,0.,0.)); +#398491 = DIRECTION('',(0.,1.,0.)); +#398492 = ADVANCED_FACE('',(#398493,#398505),#398516,.F.); +#398493 = FACE_BOUND('',#398494,.F.); +#398494 = EDGE_LOOP('',(#398495,#398496,#398497,#398504)); +#398495 = ORIENTED_EDGE('',*,*,#398419,.F.); +#398496 = ORIENTED_EDGE('',*,*,#398451,.F.); +#398497 = ORIENTED_EDGE('',*,*,#398498,.F.); +#398498 = EDGE_CURVE('',#398475,#398435,#398499,.T.); +#398499 = CIRCLE('',#398500,0.6); +#398500 = AXIS2_PLACEMENT_3D('',#398501,#398502,#398503); +#398501 = CARTESIAN_POINT('',(150.5,-77.22499938224,1.51)); +#398502 = DIRECTION('',(0.,0.,-1.)); +#398503 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398504 = ORIENTED_EDGE('',*,*,#398482,.F.); +#398505 = FACE_BOUND('',#398506,.F.); +#398506 = EDGE_LOOP('',(#398507)); +#398507 = ORIENTED_EDGE('',*,*,#398508,.T.); +#398508 = EDGE_CURVE('',#398509,#398509,#398511,.T.); +#398509 = VERTEX_POINT('',#398510); +#398510 = CARTESIAN_POINT('',(150.5,-77.85,1.51)); +#398511 = CIRCLE('',#398512,0.35); +#398512 = AXIS2_PLACEMENT_3D('',#398513,#398514,#398515); +#398513 = CARTESIAN_POINT('',(150.5,-77.5,1.51)); +#398514 = DIRECTION('',(-0.,0.,-1.)); +#398515 = DIRECTION('',(-0.,-1.,0.)); +#398516 = PLANE('',#398517); +#398517 = AXIS2_PLACEMENT_3D('',#398518,#398519,#398520); +#398518 = CARTESIAN_POINT('',(0.,0.,1.51)); +#398519 = DIRECTION('',(0.,0.,1.)); +#398520 = DIRECTION('',(1.,0.,-0.)); +#398521 = ADVANCED_FACE('',(#398522,#398534),#398545,.T.); +#398522 = FACE_BOUND('',#398523,.T.); +#398523 = EDGE_LOOP('',(#398524,#398525,#398526,#398533)); +#398524 = ORIENTED_EDGE('',*,*,#398402,.F.); +#398525 = ORIENTED_EDGE('',*,*,#398444,.F.); +#398526 = ORIENTED_EDGE('',*,*,#398527,.F.); +#398527 = EDGE_CURVE('',#398467,#398437,#398528,.T.); +#398528 = CIRCLE('',#398529,0.6); +#398529 = AXIS2_PLACEMENT_3D('',#398530,#398531,#398532); +#398530 = CARTESIAN_POINT('',(150.5,-77.22499938224,1.55)); +#398531 = DIRECTION('',(0.,0.,-1.)); +#398532 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398533 = ORIENTED_EDGE('',*,*,#398466,.F.); +#398534 = FACE_BOUND('',#398535,.T.); +#398535 = EDGE_LOOP('',(#398536)); +#398536 = ORIENTED_EDGE('',*,*,#398537,.T.); +#398537 = EDGE_CURVE('',#398538,#398538,#398540,.T.); +#398538 = VERTEX_POINT('',#398539); +#398539 = CARTESIAN_POINT('',(150.5,-77.85,1.55)); +#398540 = CIRCLE('',#398541,0.35); +#398541 = AXIS2_PLACEMENT_3D('',#398542,#398543,#398544); +#398542 = CARTESIAN_POINT('',(150.5,-77.5,1.55)); +#398543 = DIRECTION('',(-0.,0.,-1.)); +#398544 = DIRECTION('',(-0.,-1.,0.)); +#398545 = PLANE('',#398546); +#398546 = AXIS2_PLACEMENT_3D('',#398547,#398548,#398549); +#398547 = CARTESIAN_POINT('',(0.,0.,1.55)); +#398548 = DIRECTION('',(0.,0.,1.)); +#398549 = DIRECTION('',(1.,0.,-0.)); +#398550 = ADVANCED_FACE('',(#398551),#398557,.T.); +#398551 = FACE_BOUND('',#398552,.T.); +#398552 = EDGE_LOOP('',(#398553,#398554,#398555,#398556)); +#398553 = ORIENTED_EDGE('',*,*,#398474,.T.); +#398554 = ORIENTED_EDGE('',*,*,#398527,.T.); +#398555 = ORIENTED_EDGE('',*,*,#398434,.F.); +#398556 = ORIENTED_EDGE('',*,*,#398498,.F.); +#398557 = CYLINDRICAL_SURFACE('',#398558,0.6); +#398558 = AXIS2_PLACEMENT_3D('',#398559,#398560,#398561); +#398559 = CARTESIAN_POINT('',(150.5,-77.22499938224,1.51)); +#398560 = DIRECTION('',(0.,0.,-1.)); +#398561 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398562 = ADVANCED_FACE('',(#398563),#398574,.F.); +#398563 = FACE_BOUND('',#398564,.T.); +#398564 = EDGE_LOOP('',(#398565,#398566,#398572,#398573)); +#398565 = ORIENTED_EDGE('',*,*,#398508,.T.); +#398566 = ORIENTED_EDGE('',*,*,#398567,.T.); +#398567 = EDGE_CURVE('',#398509,#398538,#398568,.T.); +#398568 = LINE('',#398569,#398570); +#398569 = CARTESIAN_POINT('',(150.5,-77.85,-4.6E-02)); +#398570 = VECTOR('',#398571,1.); +#398571 = DIRECTION('',(0.,0.,1.)); +#398572 = ORIENTED_EDGE('',*,*,#398537,.F.); +#398573 = ORIENTED_EDGE('',*,*,#398567,.F.); +#398574 = CYLINDRICAL_SURFACE('',#398575,0.35); +#398575 = AXIS2_PLACEMENT_3D('',#398576,#398577,#398578); +#398576 = CARTESIAN_POINT('',(150.5,-77.5,-4.6E-02)); +#398577 = DIRECTION('',(-0.,-0.,-1.)); +#398578 = DIRECTION('',(-0.,-1.,0.)); +#398579 = MANIFOLD_SOLID_BREP('',#398580); +#398580 = CLOSED_SHELL('',(#398581,#398623,#398654,#398685,#398714, + #398743,#398755)); +#398581 = ADVANCED_FACE('',(#398582),#398618,.T.); +#398582 = FACE_BOUND('',#398583,.F.); +#398583 = EDGE_LOOP('',(#398584,#398594,#398603,#398611)); +#398584 = ORIENTED_EDGE('',*,*,#398585,.T.); +#398585 = EDGE_CURVE('',#398586,#398588,#398590,.T.); +#398586 = VERTEX_POINT('',#398587); +#398587 = CARTESIAN_POINT('',(151.1,-77.775,0.)); +#398588 = VERTEX_POINT('',#398589); +#398589 = CARTESIAN_POINT('',(151.1,-77.775,-4.E-02)); +#398590 = LINE('',#398591,#398592); +#398591 = CARTESIAN_POINT('',(151.1,-77.775,0.)); +#398592 = VECTOR('',#398593,1.); +#398593 = DIRECTION('',(0.,0.,-1.)); +#398594 = ORIENTED_EDGE('',*,*,#398595,.T.); +#398595 = EDGE_CURVE('',#398588,#398596,#398598,.T.); +#398596 = VERTEX_POINT('',#398597); +#398597 = CARTESIAN_POINT('',(149.9,-77.775,-4.E-02)); +#398598 = CIRCLE('',#398599,0.6); +#398599 = AXIS2_PLACEMENT_3D('',#398600,#398601,#398602); +#398600 = CARTESIAN_POINT('',(150.5,-77.77500012065,-4.E-02)); +#398601 = DIRECTION('',(0.,0.,-1.)); +#398602 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398603 = ORIENTED_EDGE('',*,*,#398604,.F.); +#398604 = EDGE_CURVE('',#398605,#398596,#398607,.T.); +#398605 = VERTEX_POINT('',#398606); +#398606 = CARTESIAN_POINT('',(149.9,-77.775,0.)); +#398607 = LINE('',#398608,#398609); +#398608 = CARTESIAN_POINT('',(149.9,-77.775,0.)); +#398609 = VECTOR('',#398610,1.); +#398610 = DIRECTION('',(0.,0.,-1.)); +#398611 = ORIENTED_EDGE('',*,*,#398612,.F.); +#398612 = EDGE_CURVE('',#398586,#398605,#398613,.T.); +#398613 = CIRCLE('',#398614,0.6); +#398614 = AXIS2_PLACEMENT_3D('',#398615,#398616,#398617); +#398615 = CARTESIAN_POINT('',(150.5,-77.77500012065,0.)); +#398616 = DIRECTION('',(0.,0.,-1.)); +#398617 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398618 = CYLINDRICAL_SURFACE('',#398619,0.6); +#398619 = AXIS2_PLACEMENT_3D('',#398620,#398621,#398622); +#398620 = CARTESIAN_POINT('',(150.5,-77.77500012065,0.)); +#398621 = DIRECTION('',(-0.,-0.,1.)); +#398622 = DIRECTION('',(1.,2.010883548564E-07,0.)); +#398623 = ADVANCED_FACE('',(#398624),#398649,.F.); +#398624 = FACE_BOUND('',#398625,.F.); +#398625 = EDGE_LOOP('',(#398626,#398636,#398642,#398643)); +#398626 = ORIENTED_EDGE('',*,*,#398627,.T.); +#398627 = EDGE_CURVE('',#398628,#398630,#398632,.T.); +#398628 = VERTEX_POINT('',#398629); +#398629 = CARTESIAN_POINT('',(151.1,-77.225,0.)); +#398630 = VERTEX_POINT('',#398631); +#398631 = CARTESIAN_POINT('',(151.1,-77.225,-4.E-02)); +#398632 = LINE('',#398633,#398634); +#398633 = CARTESIAN_POINT('',(151.1,-77.225,0.)); +#398634 = VECTOR('',#398635,1.); +#398635 = DIRECTION('',(0.,0.,-1.)); +#398636 = ORIENTED_EDGE('',*,*,#398637,.T.); +#398637 = EDGE_CURVE('',#398630,#398588,#398638,.T.); +#398638 = LINE('',#398639,#398640); +#398639 = CARTESIAN_POINT('',(151.1,-77.225,-4.E-02)); +#398640 = VECTOR('',#398641,1.); +#398641 = DIRECTION('',(0.,-1.,0.)); +#398642 = ORIENTED_EDGE('',*,*,#398585,.F.); +#398643 = ORIENTED_EDGE('',*,*,#398644,.F.); +#398644 = EDGE_CURVE('',#398628,#398586,#398645,.T.); +#398645 = LINE('',#398646,#398647); +#398646 = CARTESIAN_POINT('',(151.1,-77.225,0.)); +#398647 = VECTOR('',#398648,1.); +#398648 = DIRECTION('',(0.,-1.,0.)); +#398649 = PLANE('',#398650); +#398650 = AXIS2_PLACEMENT_3D('',#398651,#398652,#398653); +#398651 = CARTESIAN_POINT('',(151.1,-77.225,0.)); +#398652 = DIRECTION('',(-1.,-0.,-0.)); +#398653 = DIRECTION('',(0.,-1.,0.)); +#398654 = ADVANCED_FACE('',(#398655),#398680,.F.); +#398655 = FACE_BOUND('',#398656,.F.); +#398656 = EDGE_LOOP('',(#398657,#398658,#398666,#398674)); +#398657 = ORIENTED_EDGE('',*,*,#398604,.T.); +#398658 = ORIENTED_EDGE('',*,*,#398659,.T.); +#398659 = EDGE_CURVE('',#398596,#398660,#398662,.T.); +#398660 = VERTEX_POINT('',#398661); +#398661 = CARTESIAN_POINT('',(149.9,-77.225,-4.E-02)); +#398662 = LINE('',#398663,#398664); +#398663 = CARTESIAN_POINT('',(149.9,-77.775,-4.E-02)); +#398664 = VECTOR('',#398665,1.); +#398665 = DIRECTION('',(0.,1.,0.)); +#398666 = ORIENTED_EDGE('',*,*,#398667,.F.); +#398667 = EDGE_CURVE('',#398668,#398660,#398670,.T.); +#398668 = VERTEX_POINT('',#398669); +#398669 = CARTESIAN_POINT('',(149.9,-77.225,0.)); +#398670 = LINE('',#398671,#398672); +#398671 = CARTESIAN_POINT('',(149.9,-77.225,0.)); +#398672 = VECTOR('',#398673,1.); +#398673 = DIRECTION('',(0.,0.,-1.)); +#398674 = ORIENTED_EDGE('',*,*,#398675,.F.); +#398675 = EDGE_CURVE('',#398605,#398668,#398676,.T.); +#398676 = LINE('',#398677,#398678); +#398677 = CARTESIAN_POINT('',(149.9,-77.775,0.)); +#398678 = VECTOR('',#398679,1.); +#398679 = DIRECTION('',(0.,1.,0.)); +#398680 = PLANE('',#398681); +#398681 = AXIS2_PLACEMENT_3D('',#398682,#398683,#398684); +#398682 = CARTESIAN_POINT('',(149.9,-77.775,0.)); +#398683 = DIRECTION('',(1.,-0.,0.)); +#398684 = DIRECTION('',(0.,1.,0.)); +#398685 = ADVANCED_FACE('',(#398686,#398698),#398709,.F.); +#398686 = FACE_BOUND('',#398687,.F.); +#398687 = EDGE_LOOP('',(#398688,#398689,#398690,#398697)); +#398688 = ORIENTED_EDGE('',*,*,#398612,.T.); +#398689 = ORIENTED_EDGE('',*,*,#398675,.T.); +#398690 = ORIENTED_EDGE('',*,*,#398691,.T.); +#398691 = EDGE_CURVE('',#398668,#398628,#398692,.T.); +#398692 = CIRCLE('',#398693,0.6); +#398693 = AXIS2_PLACEMENT_3D('',#398694,#398695,#398696); +#398694 = CARTESIAN_POINT('',(150.5,-77.22499938224,0.)); +#398695 = DIRECTION('',(0.,0.,-1.)); +#398696 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398697 = ORIENTED_EDGE('',*,*,#398644,.T.); +#398698 = FACE_BOUND('',#398699,.F.); +#398699 = EDGE_LOOP('',(#398700)); +#398700 = ORIENTED_EDGE('',*,*,#398701,.F.); +#398701 = EDGE_CURVE('',#398702,#398702,#398704,.T.); +#398702 = VERTEX_POINT('',#398703); +#398703 = CARTESIAN_POINT('',(150.5,-77.85,0.)); +#398704 = CIRCLE('',#398705,0.35); +#398705 = AXIS2_PLACEMENT_3D('',#398706,#398707,#398708); +#398706 = CARTESIAN_POINT('',(150.5,-77.5,0.)); +#398707 = DIRECTION('',(-0.,0.,-1.)); +#398708 = DIRECTION('',(-0.,-1.,0.)); +#398709 = PLANE('',#398710); +#398710 = AXIS2_PLACEMENT_3D('',#398711,#398712,#398713); +#398711 = CARTESIAN_POINT('',(0.,0.,0.)); +#398712 = DIRECTION('',(-0.,-0.,-1.)); +#398713 = DIRECTION('',(-1.,0.,0.)); +#398714 = ADVANCED_FACE('',(#398715,#398727),#398738,.T.); +#398715 = FACE_BOUND('',#398716,.T.); +#398716 = EDGE_LOOP('',(#398717,#398718,#398719,#398726)); +#398717 = ORIENTED_EDGE('',*,*,#398595,.T.); +#398718 = ORIENTED_EDGE('',*,*,#398659,.T.); +#398719 = ORIENTED_EDGE('',*,*,#398720,.T.); +#398720 = EDGE_CURVE('',#398660,#398630,#398721,.T.); +#398721 = CIRCLE('',#398722,0.6); +#398722 = AXIS2_PLACEMENT_3D('',#398723,#398724,#398725); +#398723 = CARTESIAN_POINT('',(150.5,-77.22499938224,-4.E-02)); +#398724 = DIRECTION('',(0.,0.,-1.)); +#398725 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398726 = ORIENTED_EDGE('',*,*,#398637,.T.); +#398727 = FACE_BOUND('',#398728,.T.); +#398728 = EDGE_LOOP('',(#398729)); +#398729 = ORIENTED_EDGE('',*,*,#398730,.F.); +#398730 = EDGE_CURVE('',#398731,#398731,#398733,.T.); +#398731 = VERTEX_POINT('',#398732); +#398732 = CARTESIAN_POINT('',(150.5,-77.85,-4.E-02)); +#398733 = CIRCLE('',#398734,0.35); +#398734 = AXIS2_PLACEMENT_3D('',#398735,#398736,#398737); +#398735 = CARTESIAN_POINT('',(150.5,-77.5,-4.E-02)); +#398736 = DIRECTION('',(-0.,0.,-1.)); +#398737 = DIRECTION('',(-0.,-1.,0.)); +#398738 = PLANE('',#398739); +#398739 = AXIS2_PLACEMENT_3D('',#398740,#398741,#398742); +#398740 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#398741 = DIRECTION('',(-0.,-0.,-1.)); +#398742 = DIRECTION('',(-1.,0.,0.)); +#398743 = ADVANCED_FACE('',(#398744),#398750,.T.); +#398744 = FACE_BOUND('',#398745,.F.); +#398745 = EDGE_LOOP('',(#398746,#398747,#398748,#398749)); +#398746 = ORIENTED_EDGE('',*,*,#398667,.T.); +#398747 = ORIENTED_EDGE('',*,*,#398720,.T.); +#398748 = ORIENTED_EDGE('',*,*,#398627,.F.); +#398749 = ORIENTED_EDGE('',*,*,#398691,.F.); +#398750 = CYLINDRICAL_SURFACE('',#398751,0.6); +#398751 = AXIS2_PLACEMENT_3D('',#398752,#398753,#398754); +#398752 = CARTESIAN_POINT('',(150.5,-77.22499938224,0.)); +#398753 = DIRECTION('',(-0.,-0.,1.)); +#398754 = DIRECTION('',(-0.999999999999,-1.029586395399E-06,-0.)); +#398755 = ADVANCED_FACE('',(#398756),#398767,.F.); +#398756 = FACE_BOUND('',#398757,.T.); +#398757 = EDGE_LOOP('',(#398758,#398759,#398765,#398766)); +#398758 = ORIENTED_EDGE('',*,*,#398730,.T.); +#398759 = ORIENTED_EDGE('',*,*,#398760,.T.); +#398760 = EDGE_CURVE('',#398731,#398702,#398761,.T.); +#398761 = LINE('',#398762,#398763); +#398762 = CARTESIAN_POINT('',(150.5,-77.85,-4.6E-02)); +#398763 = VECTOR('',#398764,1.); +#398764 = DIRECTION('',(0.,0.,1.)); +#398765 = ORIENTED_EDGE('',*,*,#398701,.F.); +#398766 = ORIENTED_EDGE('',*,*,#398760,.F.); +#398767 = CYLINDRICAL_SURFACE('',#398768,0.35); +#398768 = AXIS2_PLACEMENT_3D('',#398769,#398770,#398771); +#398769 = CARTESIAN_POINT('',(150.5,-77.5,-4.6E-02)); +#398770 = DIRECTION('',(-0.,-0.,-1.)); +#398771 = DIRECTION('',(-0.,-1.,0.)); +#398772 = MANIFOLD_SOLID_BREP('',#398773); +#398773 = CLOSED_SHELL('',(#398774,#398807,#398827,#398847)); +#398774 = ADVANCED_FACE('',(#398775),#398802,.T.); +#398775 = FACE_BOUND('',#398776,.F.); +#398776 = EDGE_LOOP('',(#398777,#398787,#398794,#398795)); +#398777 = ORIENTED_EDGE('',*,*,#398778,.T.); +#398778 = EDGE_CURVE('',#398779,#398781,#398783,.T.); +#398779 = VERTEX_POINT('',#398780); +#398780 = CARTESIAN_POINT('',(150.5,-77.875,-4.E-02)); +#398781 = VERTEX_POINT('',#398782); +#398782 = CARTESIAN_POINT('',(150.5,-77.875,1.55)); +#398783 = LINE('',#398784,#398785); +#398784 = CARTESIAN_POINT('',(150.5,-77.875,-4.E-02)); +#398785 = VECTOR('',#398786,1.); +#398786 = DIRECTION('',(0.,0.,1.)); +#398787 = ORIENTED_EDGE('',*,*,#398788,.T.); +#398788 = EDGE_CURVE('',#398781,#398781,#398789,.T.); +#398789 = CIRCLE('',#398790,0.375); +#398790 = AXIS2_PLACEMENT_3D('',#398791,#398792,#398793); +#398791 = CARTESIAN_POINT('',(150.5,-77.5,1.55)); +#398792 = DIRECTION('',(0.,0.,1.)); +#398793 = DIRECTION('',(-0.,-1.,0.)); +#398794 = ORIENTED_EDGE('',*,*,#398778,.F.); +#398795 = ORIENTED_EDGE('',*,*,#398796,.F.); +#398796 = EDGE_CURVE('',#398779,#398779,#398797,.T.); +#398797 = CIRCLE('',#398798,0.375); +#398798 = AXIS2_PLACEMENT_3D('',#398799,#398800,#398801); +#398799 = CARTESIAN_POINT('',(150.5,-77.5,-4.E-02)); +#398800 = DIRECTION('',(0.,0.,1.)); +#398801 = DIRECTION('',(-0.,-1.,0.)); +#398802 = CYLINDRICAL_SURFACE('',#398803,0.375); +#398803 = AXIS2_PLACEMENT_3D('',#398804,#398805,#398806); +#398804 = CARTESIAN_POINT('',(150.5,-77.5,-4.E-02)); +#398805 = DIRECTION('',(-0.,-0.,-1.)); +#398806 = DIRECTION('',(-0.,-1.,0.)); +#398807 = ADVANCED_FACE('',(#398808,#398811),#398822,.F.); +#398808 = FACE_BOUND('',#398809,.F.); +#398809 = EDGE_LOOP('',(#398810)); +#398810 = ORIENTED_EDGE('',*,*,#398796,.T.); +#398811 = FACE_BOUND('',#398812,.F.); +#398812 = EDGE_LOOP('',(#398813)); +#398813 = ORIENTED_EDGE('',*,*,#398814,.T.); +#398814 = EDGE_CURVE('',#398815,#398815,#398817,.T.); +#398815 = VERTEX_POINT('',#398816); +#398816 = CARTESIAN_POINT('',(150.5,-77.85,-4.E-02)); +#398817 = CIRCLE('',#398818,0.35); +#398818 = AXIS2_PLACEMENT_3D('',#398819,#398820,#398821); +#398819 = CARTESIAN_POINT('',(150.5,-77.5,-4.E-02)); +#398820 = DIRECTION('',(-0.,0.,-1.)); +#398821 = DIRECTION('',(-0.,-1.,0.)); +#398822 = PLANE('',#398823); +#398823 = AXIS2_PLACEMENT_3D('',#398824,#398825,#398826); +#398824 = CARTESIAN_POINT('',(150.5,-77.875,-4.E-02)); +#398825 = DIRECTION('',(0.,0.,1.)); +#398826 = DIRECTION('',(1.,0.,-0.)); +#398827 = ADVANCED_FACE('',(#398828,#398831),#398842,.T.); +#398828 = FACE_BOUND('',#398829,.T.); +#398829 = EDGE_LOOP('',(#398830)); +#398830 = ORIENTED_EDGE('',*,*,#398788,.T.); +#398831 = FACE_BOUND('',#398832,.T.); +#398832 = EDGE_LOOP('',(#398833)); +#398833 = ORIENTED_EDGE('',*,*,#398834,.T.); +#398834 = EDGE_CURVE('',#398835,#398835,#398837,.T.); +#398835 = VERTEX_POINT('',#398836); +#398836 = CARTESIAN_POINT('',(150.5,-77.85,1.55)); +#398837 = CIRCLE('',#398838,0.35); +#398838 = AXIS2_PLACEMENT_3D('',#398839,#398840,#398841); +#398839 = CARTESIAN_POINT('',(150.5,-77.5,1.55)); +#398840 = DIRECTION('',(-0.,0.,-1.)); +#398841 = DIRECTION('',(-0.,-1.,0.)); +#398842 = PLANE('',#398843); +#398843 = AXIS2_PLACEMENT_3D('',#398844,#398845,#398846); +#398844 = CARTESIAN_POINT('',(150.5,-77.875,1.55)); +#398845 = DIRECTION('',(0.,0.,1.)); +#398846 = DIRECTION('',(1.,0.,-0.)); +#398847 = ADVANCED_FACE('',(#398848),#398859,.F.); +#398848 = FACE_BOUND('',#398849,.T.); +#398849 = EDGE_LOOP('',(#398850,#398851,#398857,#398858)); +#398850 = ORIENTED_EDGE('',*,*,#398814,.T.); +#398851 = ORIENTED_EDGE('',*,*,#398852,.T.); +#398852 = EDGE_CURVE('',#398815,#398835,#398853,.T.); +#398853 = LINE('',#398854,#398855); +#398854 = CARTESIAN_POINT('',(150.5,-77.85,-4.6E-02)); +#398855 = VECTOR('',#398856,1.); +#398856 = DIRECTION('',(0.,0.,1.)); +#398857 = ORIENTED_EDGE('',*,*,#398834,.F.); +#398858 = ORIENTED_EDGE('',*,*,#398852,.F.); +#398859 = CYLINDRICAL_SURFACE('',#398860,0.35); +#398860 = AXIS2_PLACEMENT_3D('',#398861,#398862,#398863); +#398861 = CARTESIAN_POINT('',(150.5,-77.5,-4.6E-02)); +#398862 = DIRECTION('',(-0.,-0.,-1.)); +#398863 = DIRECTION('',(-0.,-1.,0.)); +#398864 = MANIFOLD_SOLID_BREP('',#398865); +#398865 = CLOSED_SHELL('',(#398866,#398908,#398939,#398972,#399003, + #399036,#399067,#399100,#399122,#399138)); +#398866 = ADVANCED_FACE('',(#398867),#398903,.T.); +#398867 = FACE_BOUND('',#398868,.F.); +#398868 = EDGE_LOOP('',(#398869,#398879,#398888,#398896)); +#398869 = ORIENTED_EDGE('',*,*,#398870,.T.); +#398870 = EDGE_CURVE('',#398871,#398873,#398875,.T.); +#398871 = VERTEX_POINT('',#398872); +#398872 = CARTESIAN_POINT('',(129.69,-118.86,0.)); +#398873 = VERTEX_POINT('',#398874); +#398874 = CARTESIAN_POINT('',(129.69,-118.86,-4.E-02)); +#398875 = LINE('',#398876,#398877); +#398876 = CARTESIAN_POINT('',(129.69,-118.86,0.)); +#398877 = VECTOR('',#398878,1.); +#398878 = DIRECTION('',(0.,0.,-1.)); +#398879 = ORIENTED_EDGE('',*,*,#398880,.T.); +#398880 = EDGE_CURVE('',#398873,#398881,#398883,.T.); +#398881 = VERTEX_POINT('',#398882); +#398882 = CARTESIAN_POINT('',(129.83,-118.72,-4.E-02)); +#398883 = CIRCLE('',#398884,0.139999827125); +#398884 = AXIS2_PLACEMENT_3D('',#398885,#398886,#398887); +#398885 = CARTESIAN_POINT('',(129.82999982712,-118.8599998271,-4.E-02)); +#398886 = DIRECTION('',(0.,0.,-1.)); +#398887 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#398888 = ORIENTED_EDGE('',*,*,#398889,.F.); +#398889 = EDGE_CURVE('',#398890,#398881,#398892,.T.); +#398890 = VERTEX_POINT('',#398891); +#398891 = CARTESIAN_POINT('',(129.83,-118.72,0.)); +#398892 = LINE('',#398893,#398894); +#398893 = CARTESIAN_POINT('',(129.83,-118.72,0.)); +#398894 = VECTOR('',#398895,1.); +#398895 = DIRECTION('',(0.,0.,-1.)); +#398896 = ORIENTED_EDGE('',*,*,#398897,.F.); +#398897 = EDGE_CURVE('',#398871,#398890,#398898,.T.); +#398898 = CIRCLE('',#398899,0.139999827125); +#398899 = AXIS2_PLACEMENT_3D('',#398900,#398901,#398902); +#398900 = CARTESIAN_POINT('',(129.82999982712,-118.8599998271,0.)); +#398901 = DIRECTION('',(0.,0.,-1.)); +#398902 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#398903 = CYLINDRICAL_SURFACE('',#398904,0.139999827125); +#398904 = AXIS2_PLACEMENT_3D('',#398905,#398906,#398907); +#398905 = CARTESIAN_POINT('',(129.82999982712,-118.8599998271,0.)); +#398906 = DIRECTION('',(-0.,-0.,1.)); +#398907 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#398908 = ADVANCED_FACE('',(#398909),#398934,.F.); +#398909 = FACE_BOUND('',#398910,.F.); +#398910 = EDGE_LOOP('',(#398911,#398912,#398920,#398928)); +#398911 = ORIENTED_EDGE('',*,*,#398889,.T.); +#398912 = ORIENTED_EDGE('',*,*,#398913,.T.); +#398913 = EDGE_CURVE('',#398881,#398914,#398916,.T.); +#398914 = VERTEX_POINT('',#398915); +#398915 = CARTESIAN_POINT('',(130.17,-118.72,-4.E-02)); +#398916 = LINE('',#398917,#398918); +#398917 = CARTESIAN_POINT('',(129.83,-118.72,-4.E-02)); +#398918 = VECTOR('',#398919,1.); +#398919 = DIRECTION('',(1.,0.,0.)); +#398920 = ORIENTED_EDGE('',*,*,#398921,.F.); +#398921 = EDGE_CURVE('',#398922,#398914,#398924,.T.); +#398922 = VERTEX_POINT('',#398923); +#398923 = CARTESIAN_POINT('',(130.17,-118.72,0.)); +#398924 = LINE('',#398925,#398926); +#398925 = CARTESIAN_POINT('',(130.17,-118.72,0.)); +#398926 = VECTOR('',#398927,1.); +#398927 = DIRECTION('',(0.,0.,-1.)); +#398928 = ORIENTED_EDGE('',*,*,#398929,.F.); +#398929 = EDGE_CURVE('',#398890,#398922,#398930,.T.); +#398930 = LINE('',#398931,#398932); +#398931 = CARTESIAN_POINT('',(129.83,-118.72,0.)); +#398932 = VECTOR('',#398933,1.); +#398933 = DIRECTION('',(1.,0.,0.)); +#398934 = PLANE('',#398935); +#398935 = AXIS2_PLACEMENT_3D('',#398936,#398937,#398938); +#398936 = CARTESIAN_POINT('',(129.83,-118.72,0.)); +#398937 = DIRECTION('',(0.,-1.,0.)); +#398938 = DIRECTION('',(1.,0.,0.)); +#398939 = ADVANCED_FACE('',(#398940),#398967,.T.); +#398940 = FACE_BOUND('',#398941,.F.); +#398941 = EDGE_LOOP('',(#398942,#398943,#398952,#398960)); +#398942 = ORIENTED_EDGE('',*,*,#398921,.T.); +#398943 = ORIENTED_EDGE('',*,*,#398944,.T.); +#398944 = EDGE_CURVE('',#398914,#398945,#398947,.T.); +#398945 = VERTEX_POINT('',#398946); +#398946 = CARTESIAN_POINT('',(130.31,-118.86,-4.E-02)); +#398947 = CIRCLE('',#398948,0.139999827125); +#398948 = AXIS2_PLACEMENT_3D('',#398949,#398950,#398951); +#398949 = CARTESIAN_POINT('',(130.17000017287,-118.8599998271,-4.E-02)); +#398950 = DIRECTION('',(0.,0.,-1.)); +#398951 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#398952 = ORIENTED_EDGE('',*,*,#398953,.F.); +#398953 = EDGE_CURVE('',#398954,#398945,#398956,.T.); +#398954 = VERTEX_POINT('',#398955); +#398955 = CARTESIAN_POINT('',(130.31,-118.86,0.)); +#398956 = LINE('',#398957,#398958); +#398957 = CARTESIAN_POINT('',(130.31,-118.86,0.)); +#398958 = VECTOR('',#398959,1.); +#398959 = DIRECTION('',(0.,0.,-1.)); +#398960 = ORIENTED_EDGE('',*,*,#398961,.F.); +#398961 = EDGE_CURVE('',#398922,#398954,#398962,.T.); +#398962 = CIRCLE('',#398963,0.139999827125); +#398963 = AXIS2_PLACEMENT_3D('',#398964,#398965,#398966); +#398964 = CARTESIAN_POINT('',(130.17000017287,-118.8599998271,0.)); +#398965 = DIRECTION('',(0.,0.,-1.)); +#398966 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#398967 = CYLINDRICAL_SURFACE('',#398968,0.139999827125); +#398968 = AXIS2_PLACEMENT_3D('',#398969,#398970,#398971); +#398969 = CARTESIAN_POINT('',(130.17000017287,-118.8599998271,0.)); +#398970 = DIRECTION('',(-0.,-0.,1.)); +#398971 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#398972 = ADVANCED_FACE('',(#398973),#398998,.F.); +#398973 = FACE_BOUND('',#398974,.F.); +#398974 = EDGE_LOOP('',(#398975,#398976,#398984,#398992)); +#398975 = ORIENTED_EDGE('',*,*,#398953,.T.); +#398976 = ORIENTED_EDGE('',*,*,#398977,.T.); +#398977 = EDGE_CURVE('',#398945,#398978,#398980,.T.); +#398978 = VERTEX_POINT('',#398979); +#398979 = CARTESIAN_POINT('',(130.31,-119.14,-4.E-02)); +#398980 = LINE('',#398981,#398982); +#398981 = CARTESIAN_POINT('',(130.31,-118.86,-4.E-02)); +#398982 = VECTOR('',#398983,1.); +#398983 = DIRECTION('',(0.,-1.,0.)); +#398984 = ORIENTED_EDGE('',*,*,#398985,.F.); +#398985 = EDGE_CURVE('',#398986,#398978,#398988,.T.); +#398986 = VERTEX_POINT('',#398987); +#398987 = CARTESIAN_POINT('',(130.31,-119.14,0.)); +#398988 = LINE('',#398989,#398990); +#398989 = CARTESIAN_POINT('',(130.31,-119.14,0.)); +#398990 = VECTOR('',#398991,1.); +#398991 = DIRECTION('',(0.,0.,-1.)); +#398992 = ORIENTED_EDGE('',*,*,#398993,.F.); +#398993 = EDGE_CURVE('',#398954,#398986,#398994,.T.); +#398994 = LINE('',#398995,#398996); +#398995 = CARTESIAN_POINT('',(130.31,-118.86,0.)); +#398996 = VECTOR('',#398997,1.); +#398997 = DIRECTION('',(0.,-1.,0.)); +#398998 = PLANE('',#398999); +#398999 = AXIS2_PLACEMENT_3D('',#399000,#399001,#399002); +#399000 = CARTESIAN_POINT('',(130.31,-118.86,0.)); +#399001 = DIRECTION('',(-1.,-0.,-0.)); +#399002 = DIRECTION('',(0.,-1.,0.)); +#399003 = ADVANCED_FACE('',(#399004),#399031,.T.); +#399004 = FACE_BOUND('',#399005,.F.); +#399005 = EDGE_LOOP('',(#399006,#399007,#399016,#399024)); +#399006 = ORIENTED_EDGE('',*,*,#398985,.T.); +#399007 = ORIENTED_EDGE('',*,*,#399008,.T.); +#399008 = EDGE_CURVE('',#398978,#399009,#399011,.T.); +#399009 = VERTEX_POINT('',#399010); +#399010 = CARTESIAN_POINT('',(130.17,-119.28,-4.E-02)); +#399011 = CIRCLE('',#399012,0.139999827125); +#399012 = AXIS2_PLACEMENT_3D('',#399013,#399014,#399015); +#399013 = CARTESIAN_POINT('',(130.17000017287,-119.1400001728,-4.E-02)); +#399014 = DIRECTION('',(0.,0.,-1.)); +#399015 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#399016 = ORIENTED_EDGE('',*,*,#399017,.F.); +#399017 = EDGE_CURVE('',#399018,#399009,#399020,.T.); +#399018 = VERTEX_POINT('',#399019); +#399019 = CARTESIAN_POINT('',(130.17,-119.28,0.)); +#399020 = LINE('',#399021,#399022); +#399021 = CARTESIAN_POINT('',(130.17,-119.28,0.)); +#399022 = VECTOR('',#399023,1.); +#399023 = DIRECTION('',(0.,0.,-1.)); +#399024 = ORIENTED_EDGE('',*,*,#399025,.F.); +#399025 = EDGE_CURVE('',#398986,#399018,#399026,.T.); +#399026 = CIRCLE('',#399027,0.139999827125); +#399027 = AXIS2_PLACEMENT_3D('',#399028,#399029,#399030); +#399028 = CARTESIAN_POINT('',(130.17000017287,-119.1400001728,0.)); +#399029 = DIRECTION('',(0.,0.,-1.)); +#399030 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#399031 = CYLINDRICAL_SURFACE('',#399032,0.139999827125); +#399032 = AXIS2_PLACEMENT_3D('',#399033,#399034,#399035); +#399033 = CARTESIAN_POINT('',(130.17000017287,-119.1400001728,0.)); +#399034 = DIRECTION('',(-0.,-0.,1.)); +#399035 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#399036 = ADVANCED_FACE('',(#399037),#399062,.F.); +#399037 = FACE_BOUND('',#399038,.F.); +#399038 = EDGE_LOOP('',(#399039,#399040,#399048,#399056)); +#399039 = ORIENTED_EDGE('',*,*,#399017,.T.); +#399040 = ORIENTED_EDGE('',*,*,#399041,.T.); +#399041 = EDGE_CURVE('',#399009,#399042,#399044,.T.); +#399042 = VERTEX_POINT('',#399043); +#399043 = CARTESIAN_POINT('',(129.83,-119.28,-4.E-02)); +#399044 = LINE('',#399045,#399046); +#399045 = CARTESIAN_POINT('',(130.17,-119.28,-4.E-02)); +#399046 = VECTOR('',#399047,1.); +#399047 = DIRECTION('',(-1.,0.,0.)); +#399048 = ORIENTED_EDGE('',*,*,#399049,.F.); +#399049 = EDGE_CURVE('',#399050,#399042,#399052,.T.); +#399050 = VERTEX_POINT('',#399051); +#399051 = CARTESIAN_POINT('',(129.83,-119.28,0.)); +#399052 = LINE('',#399053,#399054); +#399053 = CARTESIAN_POINT('',(129.83,-119.28,0.)); +#399054 = VECTOR('',#399055,1.); +#399055 = DIRECTION('',(0.,0.,-1.)); +#399056 = ORIENTED_EDGE('',*,*,#399057,.F.); +#399057 = EDGE_CURVE('',#399018,#399050,#399058,.T.); +#399058 = LINE('',#399059,#399060); +#399059 = CARTESIAN_POINT('',(130.17,-119.28,0.)); +#399060 = VECTOR('',#399061,1.); +#399061 = DIRECTION('',(-1.,0.,0.)); +#399062 = PLANE('',#399063); +#399063 = AXIS2_PLACEMENT_3D('',#399064,#399065,#399066); +#399064 = CARTESIAN_POINT('',(130.17,-119.28,0.)); +#399065 = DIRECTION('',(0.,1.,0.)); +#399066 = DIRECTION('',(-1.,0.,0.)); +#399067 = ADVANCED_FACE('',(#399068),#399095,.T.); +#399068 = FACE_BOUND('',#399069,.F.); +#399069 = EDGE_LOOP('',(#399070,#399071,#399080,#399088)); +#399070 = ORIENTED_EDGE('',*,*,#399049,.T.); +#399071 = ORIENTED_EDGE('',*,*,#399072,.T.); +#399072 = EDGE_CURVE('',#399042,#399073,#399075,.T.); +#399073 = VERTEX_POINT('',#399074); +#399074 = CARTESIAN_POINT('',(129.69,-119.14,-4.E-02)); +#399075 = CIRCLE('',#399076,0.139999827125); +#399076 = AXIS2_PLACEMENT_3D('',#399077,#399078,#399079); +#399077 = CARTESIAN_POINT('',(129.82999982712,-119.1400001728,-4.E-02)); +#399078 = DIRECTION('',(0.,0.,-1.)); +#399079 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#399080 = ORIENTED_EDGE('',*,*,#399081,.F.); +#399081 = EDGE_CURVE('',#399082,#399073,#399084,.T.); +#399082 = VERTEX_POINT('',#399083); +#399083 = CARTESIAN_POINT('',(129.69,-119.14,0.)); +#399084 = LINE('',#399085,#399086); +#399085 = CARTESIAN_POINT('',(129.69,-119.14,0.)); +#399086 = VECTOR('',#399087,1.); +#399087 = DIRECTION('',(0.,0.,-1.)); +#399088 = ORIENTED_EDGE('',*,*,#399089,.F.); +#399089 = EDGE_CURVE('',#399050,#399082,#399090,.T.); +#399090 = CIRCLE('',#399091,0.139999827125); +#399091 = AXIS2_PLACEMENT_3D('',#399092,#399093,#399094); +#399092 = CARTESIAN_POINT('',(129.82999982712,-119.1400001728,0.)); +#399093 = DIRECTION('',(0.,0.,-1.)); +#399094 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#399095 = CYLINDRICAL_SURFACE('',#399096,0.139999827125); +#399096 = AXIS2_PLACEMENT_3D('',#399097,#399098,#399099); +#399097 = CARTESIAN_POINT('',(129.82999982712,-119.1400001728,0.)); +#399098 = DIRECTION('',(-0.,-0.,1.)); +#399099 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#399100 = ADVANCED_FACE('',(#399101),#399117,.F.); +#399101 = FACE_BOUND('',#399102,.F.); +#399102 = EDGE_LOOP('',(#399103,#399104,#399110,#399111)); +#399103 = ORIENTED_EDGE('',*,*,#399081,.T.); +#399104 = ORIENTED_EDGE('',*,*,#399105,.T.); +#399105 = EDGE_CURVE('',#399073,#398873,#399106,.T.); +#399106 = LINE('',#399107,#399108); +#399107 = CARTESIAN_POINT('',(129.69,-119.14,-4.E-02)); +#399108 = VECTOR('',#399109,1.); +#399109 = DIRECTION('',(0.,1.,0.)); +#399110 = ORIENTED_EDGE('',*,*,#398870,.F.); +#399111 = ORIENTED_EDGE('',*,*,#399112,.F.); +#399112 = EDGE_CURVE('',#399082,#398871,#399113,.T.); +#399113 = LINE('',#399114,#399115); +#399114 = CARTESIAN_POINT('',(129.69,-119.14,0.)); +#399115 = VECTOR('',#399116,1.); +#399116 = DIRECTION('',(0.,1.,0.)); +#399117 = PLANE('',#399118); +#399118 = AXIS2_PLACEMENT_3D('',#399119,#399120,#399121); +#399119 = CARTESIAN_POINT('',(129.69,-119.14,0.)); +#399120 = DIRECTION('',(1.,-0.,0.)); +#399121 = DIRECTION('',(0.,1.,0.)); +#399122 = ADVANCED_FACE('',(#399123),#399133,.F.); +#399123 = FACE_BOUND('',#399124,.F.); +#399124 = EDGE_LOOP('',(#399125,#399126,#399127,#399128,#399129,#399130, + #399131,#399132)); +#399125 = ORIENTED_EDGE('',*,*,#398897,.T.); +#399126 = ORIENTED_EDGE('',*,*,#398929,.T.); +#399127 = ORIENTED_EDGE('',*,*,#398961,.T.); +#399128 = ORIENTED_EDGE('',*,*,#398993,.T.); +#399129 = ORIENTED_EDGE('',*,*,#399025,.T.); +#399130 = ORIENTED_EDGE('',*,*,#399057,.T.); +#399131 = ORIENTED_EDGE('',*,*,#399089,.T.); +#399132 = ORIENTED_EDGE('',*,*,#399112,.T.); +#399133 = PLANE('',#399134); +#399134 = AXIS2_PLACEMENT_3D('',#399135,#399136,#399137); +#399135 = CARTESIAN_POINT('',(0.,0.,0.)); +#399136 = DIRECTION('',(-0.,-0.,-1.)); +#399137 = DIRECTION('',(-1.,0.,0.)); +#399138 = ADVANCED_FACE('',(#399139),#399149,.T.); +#399139 = FACE_BOUND('',#399140,.T.); +#399140 = EDGE_LOOP('',(#399141,#399142,#399143,#399144,#399145,#399146, + #399147,#399148)); +#399141 = ORIENTED_EDGE('',*,*,#398880,.T.); +#399142 = ORIENTED_EDGE('',*,*,#398913,.T.); +#399143 = ORIENTED_EDGE('',*,*,#398944,.T.); +#399144 = ORIENTED_EDGE('',*,*,#398977,.T.); +#399145 = ORIENTED_EDGE('',*,*,#399008,.T.); +#399146 = ORIENTED_EDGE('',*,*,#399041,.T.); +#399147 = ORIENTED_EDGE('',*,*,#399072,.T.); +#399148 = ORIENTED_EDGE('',*,*,#399105,.T.); +#399149 = PLANE('',#399150); +#399150 = AXIS2_PLACEMENT_3D('',#399151,#399152,#399153); +#399151 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#399152 = DIRECTION('',(-0.,-0.,-1.)); +#399153 = DIRECTION('',(-1.,0.,0.)); +#399154 = MANIFOLD_SOLID_BREP('',#399155); +#399155 = CLOSED_SHELL('',(#399156,#399198,#399229,#399262,#399293, + #399326,#399357,#399390,#399412,#399428)); +#399156 = ADVANCED_FACE('',(#399157),#399193,.T.); +#399157 = FACE_BOUND('',#399158,.F.); +#399158 = EDGE_LOOP('',(#399159,#399169,#399178,#399186)); +#399159 = ORIENTED_EDGE('',*,*,#399160,.T.); +#399160 = EDGE_CURVE('',#399161,#399163,#399165,.T.); +#399161 = VERTEX_POINT('',#399162); +#399162 = CARTESIAN_POINT('',(125.6,-117.525,0.)); +#399163 = VERTEX_POINT('',#399164); +#399164 = CARTESIAN_POINT('',(125.6,-117.525,-4.E-02)); +#399165 = LINE('',#399166,#399167); +#399166 = CARTESIAN_POINT('',(125.6,-117.525,0.)); +#399167 = VECTOR('',#399168,1.); +#399168 = DIRECTION('',(0.,0.,-1.)); +#399169 = ORIENTED_EDGE('',*,*,#399170,.T.); +#399170 = EDGE_CURVE('',#399163,#399171,#399173,.T.); +#399171 = VERTEX_POINT('',#399172); +#399172 = CARTESIAN_POINT('',(125.85,-117.275,-4.E-02)); +#399173 = CIRCLE('',#399174,0.249998959685); +#399174 = AXIS2_PLACEMENT_3D('',#399175,#399176,#399177); +#399175 = CARTESIAN_POINT('',(125.84999895968,-117.5249989596,-4.E-02)); +#399176 = DIRECTION('',(0.,0.,-1.)); +#399177 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#399178 = ORIENTED_EDGE('',*,*,#399179,.F.); +#399179 = EDGE_CURVE('',#399180,#399171,#399182,.T.); +#399180 = VERTEX_POINT('',#399181); +#399181 = CARTESIAN_POINT('',(125.85,-117.275,0.)); +#399182 = LINE('',#399183,#399184); +#399183 = CARTESIAN_POINT('',(125.85,-117.275,0.)); +#399184 = VECTOR('',#399185,1.); +#399185 = DIRECTION('',(0.,0.,-1.)); +#399186 = ORIENTED_EDGE('',*,*,#399187,.F.); +#399187 = EDGE_CURVE('',#399161,#399180,#399188,.T.); +#399188 = CIRCLE('',#399189,0.249998959685); +#399189 = AXIS2_PLACEMENT_3D('',#399190,#399191,#399192); +#399190 = CARTESIAN_POINT('',(125.84999895968,-117.5249989596,0.)); +#399191 = DIRECTION('',(0.,0.,-1.)); +#399192 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#399193 = CYLINDRICAL_SURFACE('',#399194,0.249998959685); +#399194 = AXIS2_PLACEMENT_3D('',#399195,#399196,#399197); +#399195 = CARTESIAN_POINT('',(125.84999895968,-117.5249989596,0.)); +#399196 = DIRECTION('',(-0.,-0.,1.)); +#399197 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#399198 = ADVANCED_FACE('',(#399199),#399224,.F.); +#399199 = FACE_BOUND('',#399200,.F.); +#399200 = EDGE_LOOP('',(#399201,#399202,#399210,#399218)); +#399201 = ORIENTED_EDGE('',*,*,#399179,.T.); +#399202 = ORIENTED_EDGE('',*,*,#399203,.T.); +#399203 = EDGE_CURVE('',#399171,#399204,#399206,.T.); +#399204 = VERTEX_POINT('',#399205); +#399205 = CARTESIAN_POINT('',(126.35,-117.275,-4.E-02)); +#399206 = LINE('',#399207,#399208); +#399207 = CARTESIAN_POINT('',(125.85,-117.275,-4.E-02)); +#399208 = VECTOR('',#399209,1.); +#399209 = DIRECTION('',(1.,0.,0.)); +#399210 = ORIENTED_EDGE('',*,*,#399211,.F.); +#399211 = EDGE_CURVE('',#399212,#399204,#399214,.T.); +#399212 = VERTEX_POINT('',#399213); +#399213 = CARTESIAN_POINT('',(126.35,-117.275,0.)); +#399214 = LINE('',#399215,#399216); +#399215 = CARTESIAN_POINT('',(126.35,-117.275,0.)); +#399216 = VECTOR('',#399217,1.); +#399217 = DIRECTION('',(0.,0.,-1.)); +#399218 = ORIENTED_EDGE('',*,*,#399219,.F.); +#399219 = EDGE_CURVE('',#399180,#399212,#399220,.T.); +#399220 = LINE('',#399221,#399222); +#399221 = CARTESIAN_POINT('',(125.85,-117.275,0.)); +#399222 = VECTOR('',#399223,1.); +#399223 = DIRECTION('',(1.,0.,0.)); +#399224 = PLANE('',#399225); +#399225 = AXIS2_PLACEMENT_3D('',#399226,#399227,#399228); +#399226 = CARTESIAN_POINT('',(125.85,-117.275,0.)); +#399227 = DIRECTION('',(0.,-1.,0.)); +#399228 = DIRECTION('',(1.,0.,0.)); +#399229 = ADVANCED_FACE('',(#399230),#399257,.T.); +#399230 = FACE_BOUND('',#399231,.F.); +#399231 = EDGE_LOOP('',(#399232,#399233,#399242,#399250)); +#399232 = ORIENTED_EDGE('',*,*,#399211,.T.); +#399233 = ORIENTED_EDGE('',*,*,#399234,.T.); +#399234 = EDGE_CURVE('',#399204,#399235,#399237,.T.); +#399235 = VERTEX_POINT('',#399236); +#399236 = CARTESIAN_POINT('',(126.6,-117.525,-4.E-02)); +#399237 = CIRCLE('',#399238,0.249998959685); +#399238 = AXIS2_PLACEMENT_3D('',#399239,#399240,#399241); +#399239 = CARTESIAN_POINT('',(126.35000104031,-117.5249989596,-4.E-02)); +#399240 = DIRECTION('',(0.,0.,-1.)); +#399241 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399242 = ORIENTED_EDGE('',*,*,#399243,.F.); +#399243 = EDGE_CURVE('',#399244,#399235,#399246,.T.); +#399244 = VERTEX_POINT('',#399245); +#399245 = CARTESIAN_POINT('',(126.6,-117.525,0.)); +#399246 = LINE('',#399247,#399248); +#399247 = CARTESIAN_POINT('',(126.6,-117.525,0.)); +#399248 = VECTOR('',#399249,1.); +#399249 = DIRECTION('',(0.,0.,-1.)); +#399250 = ORIENTED_EDGE('',*,*,#399251,.F.); +#399251 = EDGE_CURVE('',#399212,#399244,#399252,.T.); +#399252 = CIRCLE('',#399253,0.249998959685); +#399253 = AXIS2_PLACEMENT_3D('',#399254,#399255,#399256); +#399254 = CARTESIAN_POINT('',(126.35000104031,-117.5249989596,0.)); +#399255 = DIRECTION('',(0.,0.,-1.)); +#399256 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399257 = CYLINDRICAL_SURFACE('',#399258,0.249998959685); +#399258 = AXIS2_PLACEMENT_3D('',#399259,#399260,#399261); +#399259 = CARTESIAN_POINT('',(126.35000104031,-117.5249989596,0.)); +#399260 = DIRECTION('',(-0.,-0.,1.)); +#399261 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399262 = ADVANCED_FACE('',(#399263),#399288,.F.); +#399263 = FACE_BOUND('',#399264,.F.); +#399264 = EDGE_LOOP('',(#399265,#399266,#399274,#399282)); +#399265 = ORIENTED_EDGE('',*,*,#399243,.T.); +#399266 = ORIENTED_EDGE('',*,*,#399267,.T.); +#399267 = EDGE_CURVE('',#399235,#399268,#399270,.T.); +#399268 = VERTEX_POINT('',#399269); +#399269 = CARTESIAN_POINT('',(126.6,-118.475,-4.E-02)); +#399270 = LINE('',#399271,#399272); +#399271 = CARTESIAN_POINT('',(126.6,-117.525,-4.E-02)); +#399272 = VECTOR('',#399273,1.); +#399273 = DIRECTION('',(0.,-1.,0.)); +#399274 = ORIENTED_EDGE('',*,*,#399275,.F.); +#399275 = EDGE_CURVE('',#399276,#399268,#399278,.T.); +#399276 = VERTEX_POINT('',#399277); +#399277 = CARTESIAN_POINT('',(126.6,-118.475,0.)); +#399278 = LINE('',#399279,#399280); +#399279 = CARTESIAN_POINT('',(126.6,-118.475,0.)); +#399280 = VECTOR('',#399281,1.); +#399281 = DIRECTION('',(0.,0.,-1.)); +#399282 = ORIENTED_EDGE('',*,*,#399283,.F.); +#399283 = EDGE_CURVE('',#399244,#399276,#399284,.T.); +#399284 = LINE('',#399285,#399286); +#399285 = CARTESIAN_POINT('',(126.6,-117.525,0.)); +#399286 = VECTOR('',#399287,1.); +#399287 = DIRECTION('',(0.,-1.,0.)); +#399288 = PLANE('',#399289); +#399289 = AXIS2_PLACEMENT_3D('',#399290,#399291,#399292); +#399290 = CARTESIAN_POINT('',(126.6,-117.525,0.)); +#399291 = DIRECTION('',(-1.,-0.,-0.)); +#399292 = DIRECTION('',(0.,-1.,0.)); +#399293 = ADVANCED_FACE('',(#399294),#399321,.T.); +#399294 = FACE_BOUND('',#399295,.F.); +#399295 = EDGE_LOOP('',(#399296,#399297,#399306,#399314)); +#399296 = ORIENTED_EDGE('',*,*,#399275,.T.); +#399297 = ORIENTED_EDGE('',*,*,#399298,.T.); +#399298 = EDGE_CURVE('',#399268,#399299,#399301,.T.); +#399299 = VERTEX_POINT('',#399300); +#399300 = CARTESIAN_POINT('',(126.35,-118.725,-4.E-02)); +#399301 = CIRCLE('',#399302,0.249998959685); +#399302 = AXIS2_PLACEMENT_3D('',#399303,#399304,#399305); +#399303 = CARTESIAN_POINT('',(126.35000104031,-118.4750010403,-4.E-02)); +#399304 = DIRECTION('',(0.,0.,-1.)); +#399305 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#399306 = ORIENTED_EDGE('',*,*,#399307,.F.); +#399307 = EDGE_CURVE('',#399308,#399299,#399310,.T.); +#399308 = VERTEX_POINT('',#399309); +#399309 = CARTESIAN_POINT('',(126.35,-118.725,0.)); +#399310 = LINE('',#399311,#399312); +#399311 = CARTESIAN_POINT('',(126.35,-118.725,0.)); +#399312 = VECTOR('',#399313,1.); +#399313 = DIRECTION('',(0.,0.,-1.)); +#399314 = ORIENTED_EDGE('',*,*,#399315,.F.); +#399315 = EDGE_CURVE('',#399276,#399308,#399316,.T.); +#399316 = CIRCLE('',#399317,0.249998959685); +#399317 = AXIS2_PLACEMENT_3D('',#399318,#399319,#399320); +#399318 = CARTESIAN_POINT('',(126.35000104031,-118.4750010403,0.)); +#399319 = DIRECTION('',(0.,0.,-1.)); +#399320 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#399321 = CYLINDRICAL_SURFACE('',#399322,0.249998959685); +#399322 = AXIS2_PLACEMENT_3D('',#399323,#399324,#399325); +#399323 = CARTESIAN_POINT('',(126.35000104031,-118.4750010403,0.)); +#399324 = DIRECTION('',(-0.,-0.,1.)); +#399325 = DIRECTION('',(0.999999999991,4.16128589391E-06,0.)); +#399326 = ADVANCED_FACE('',(#399327),#399352,.F.); +#399327 = FACE_BOUND('',#399328,.F.); +#399328 = EDGE_LOOP('',(#399329,#399330,#399338,#399346)); +#399329 = ORIENTED_EDGE('',*,*,#399307,.T.); +#399330 = ORIENTED_EDGE('',*,*,#399331,.T.); +#399331 = EDGE_CURVE('',#399299,#399332,#399334,.T.); +#399332 = VERTEX_POINT('',#399333); +#399333 = CARTESIAN_POINT('',(125.85,-118.725,-4.E-02)); +#399334 = LINE('',#399335,#399336); +#399335 = CARTESIAN_POINT('',(126.35,-118.725,-4.E-02)); +#399336 = VECTOR('',#399337,1.); +#399337 = DIRECTION('',(-1.,0.,0.)); +#399338 = ORIENTED_EDGE('',*,*,#399339,.F.); +#399339 = EDGE_CURVE('',#399340,#399332,#399342,.T.); +#399340 = VERTEX_POINT('',#399341); +#399341 = CARTESIAN_POINT('',(125.85,-118.725,0.)); +#399342 = LINE('',#399343,#399344); +#399343 = CARTESIAN_POINT('',(125.85,-118.725,0.)); +#399344 = VECTOR('',#399345,1.); +#399345 = DIRECTION('',(0.,0.,-1.)); +#399346 = ORIENTED_EDGE('',*,*,#399347,.F.); +#399347 = EDGE_CURVE('',#399308,#399340,#399348,.T.); +#399348 = LINE('',#399349,#399350); +#399349 = CARTESIAN_POINT('',(126.35,-118.725,0.)); +#399350 = VECTOR('',#399351,1.); +#399351 = DIRECTION('',(-1.,0.,0.)); +#399352 = PLANE('',#399353); +#399353 = AXIS2_PLACEMENT_3D('',#399354,#399355,#399356); +#399354 = CARTESIAN_POINT('',(126.35,-118.725,0.)); +#399355 = DIRECTION('',(0.,1.,0.)); +#399356 = DIRECTION('',(-1.,0.,0.)); +#399357 = ADVANCED_FACE('',(#399358),#399385,.T.); +#399358 = FACE_BOUND('',#399359,.F.); +#399359 = EDGE_LOOP('',(#399360,#399361,#399370,#399378)); +#399360 = ORIENTED_EDGE('',*,*,#399339,.T.); +#399361 = ORIENTED_EDGE('',*,*,#399362,.T.); +#399362 = EDGE_CURVE('',#399332,#399363,#399365,.T.); +#399363 = VERTEX_POINT('',#399364); +#399364 = CARTESIAN_POINT('',(125.6,-118.475,-4.E-02)); +#399365 = CIRCLE('',#399366,0.249998959685); +#399366 = AXIS2_PLACEMENT_3D('',#399367,#399368,#399369); +#399367 = CARTESIAN_POINT('',(125.84999895968,-118.4750010403,-4.E-02)); +#399368 = DIRECTION('',(0.,0.,-1.)); +#399369 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#399370 = ORIENTED_EDGE('',*,*,#399371,.F.); +#399371 = EDGE_CURVE('',#399372,#399363,#399374,.T.); +#399372 = VERTEX_POINT('',#399373); +#399373 = CARTESIAN_POINT('',(125.6,-118.475,0.)); +#399374 = LINE('',#399375,#399376); +#399375 = CARTESIAN_POINT('',(125.6,-118.475,0.)); +#399376 = VECTOR('',#399377,1.); +#399377 = DIRECTION('',(0.,0.,-1.)); +#399378 = ORIENTED_EDGE('',*,*,#399379,.F.); +#399379 = EDGE_CURVE('',#399340,#399372,#399380,.T.); +#399380 = CIRCLE('',#399381,0.249998959685); +#399381 = AXIS2_PLACEMENT_3D('',#399382,#399383,#399384); +#399382 = CARTESIAN_POINT('',(125.84999895968,-118.4750010403,0.)); +#399383 = DIRECTION('',(0.,0.,-1.)); +#399384 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#399385 = CYLINDRICAL_SURFACE('',#399386,0.249998959685); +#399386 = AXIS2_PLACEMENT_3D('',#399387,#399388,#399389); +#399387 = CARTESIAN_POINT('',(125.84999895968,-118.4750010403,0.)); +#399388 = DIRECTION('',(-0.,-0.,1.)); +#399389 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#399390 = ADVANCED_FACE('',(#399391),#399407,.F.); +#399391 = FACE_BOUND('',#399392,.F.); +#399392 = EDGE_LOOP('',(#399393,#399394,#399400,#399401)); +#399393 = ORIENTED_EDGE('',*,*,#399371,.T.); +#399394 = ORIENTED_EDGE('',*,*,#399395,.T.); +#399395 = EDGE_CURVE('',#399363,#399163,#399396,.T.); +#399396 = LINE('',#399397,#399398); +#399397 = CARTESIAN_POINT('',(125.6,-118.475,-4.E-02)); +#399398 = VECTOR('',#399399,1.); +#399399 = DIRECTION('',(0.,1.,0.)); +#399400 = ORIENTED_EDGE('',*,*,#399160,.F.); +#399401 = ORIENTED_EDGE('',*,*,#399402,.F.); +#399402 = EDGE_CURVE('',#399372,#399161,#399403,.T.); +#399403 = LINE('',#399404,#399405); +#399404 = CARTESIAN_POINT('',(125.6,-118.475,0.)); +#399405 = VECTOR('',#399406,1.); +#399406 = DIRECTION('',(0.,1.,0.)); +#399407 = PLANE('',#399408); +#399408 = AXIS2_PLACEMENT_3D('',#399409,#399410,#399411); +#399409 = CARTESIAN_POINT('',(125.6,-118.475,0.)); +#399410 = DIRECTION('',(1.,-0.,0.)); +#399411 = DIRECTION('',(0.,1.,0.)); +#399412 = ADVANCED_FACE('',(#399413),#399423,.F.); +#399413 = FACE_BOUND('',#399414,.F.); +#399414 = EDGE_LOOP('',(#399415,#399416,#399417,#399418,#399419,#399420, + #399421,#399422)); +#399415 = ORIENTED_EDGE('',*,*,#399187,.T.); +#399416 = ORIENTED_EDGE('',*,*,#399219,.T.); +#399417 = ORIENTED_EDGE('',*,*,#399251,.T.); +#399418 = ORIENTED_EDGE('',*,*,#399283,.T.); +#399419 = ORIENTED_EDGE('',*,*,#399315,.T.); +#399420 = ORIENTED_EDGE('',*,*,#399347,.T.); +#399421 = ORIENTED_EDGE('',*,*,#399379,.T.); +#399422 = ORIENTED_EDGE('',*,*,#399402,.T.); +#399423 = PLANE('',#399424); +#399424 = AXIS2_PLACEMENT_3D('',#399425,#399426,#399427); +#399425 = CARTESIAN_POINT('',(0.,0.,0.)); +#399426 = DIRECTION('',(-0.,-0.,-1.)); +#399427 = DIRECTION('',(-1.,0.,0.)); +#399428 = ADVANCED_FACE('',(#399429),#399439,.T.); +#399429 = FACE_BOUND('',#399430,.T.); +#399430 = EDGE_LOOP('',(#399431,#399432,#399433,#399434,#399435,#399436, + #399437,#399438)); +#399431 = ORIENTED_EDGE('',*,*,#399170,.T.); +#399432 = ORIENTED_EDGE('',*,*,#399203,.T.); +#399433 = ORIENTED_EDGE('',*,*,#399234,.T.); +#399434 = ORIENTED_EDGE('',*,*,#399267,.T.); +#399435 = ORIENTED_EDGE('',*,*,#399298,.T.); +#399436 = ORIENTED_EDGE('',*,*,#399331,.T.); +#399437 = ORIENTED_EDGE('',*,*,#399362,.T.); +#399438 = ORIENTED_EDGE('',*,*,#399395,.T.); +#399439 = PLANE('',#399440); +#399440 = AXIS2_PLACEMENT_3D('',#399441,#399442,#399443); +#399441 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#399442 = DIRECTION('',(-0.,-0.,-1.)); +#399443 = DIRECTION('',(-1.,0.,0.)); +#399444 = MANIFOLD_SOLID_BREP('',#399445); +#399445 = CLOSED_SHELL('',(#399446,#399488,#399519,#399552,#399583, + #399616,#399647,#399680,#399702,#399718)); +#399446 = ADVANCED_FACE('',(#399447),#399483,.T.); +#399447 = FACE_BOUND('',#399448,.F.); +#399448 = EDGE_LOOP('',(#399449,#399459,#399468,#399476)); +#399449 = ORIENTED_EDGE('',*,*,#399450,.T.); +#399450 = EDGE_CURVE('',#399451,#399453,#399455,.T.); +#399451 = VERTEX_POINT('',#399452); +#399452 = CARTESIAN_POINT('',(121.3,-110.7,0.)); +#399453 = VERTEX_POINT('',#399454); +#399454 = CARTESIAN_POINT('',(121.3,-110.7,-4.E-02)); +#399455 = LINE('',#399456,#399457); +#399456 = CARTESIAN_POINT('',(121.3,-110.7,0.)); +#399457 = VECTOR('',#399458,1.); +#399458 = DIRECTION('',(0.,0.,-1.)); +#399459 = ORIENTED_EDGE('',*,*,#399460,.T.); +#399460 = EDGE_CURVE('',#399453,#399461,#399463,.T.); +#399461 = VERTEX_POINT('',#399462); +#399462 = CARTESIAN_POINT('',(121.55,-110.45,-4.E-02)); +#399463 = CIRCLE('',#399464,0.249998959685); +#399464 = AXIS2_PLACEMENT_3D('',#399465,#399466,#399467); +#399465 = CARTESIAN_POINT('',(121.54999895968,-110.6999989596,-4.E-02)); +#399466 = DIRECTION('',(0.,0.,-1.)); +#399467 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#399468 = ORIENTED_EDGE('',*,*,#399469,.F.); +#399469 = EDGE_CURVE('',#399470,#399461,#399472,.T.); +#399470 = VERTEX_POINT('',#399471); +#399471 = CARTESIAN_POINT('',(121.55,-110.45,0.)); +#399472 = LINE('',#399473,#399474); +#399473 = CARTESIAN_POINT('',(121.55,-110.45,0.)); +#399474 = VECTOR('',#399475,1.); +#399475 = DIRECTION('',(0.,0.,-1.)); +#399476 = ORIENTED_EDGE('',*,*,#399477,.F.); +#399477 = EDGE_CURVE('',#399451,#399470,#399478,.T.); +#399478 = CIRCLE('',#399479,0.249998959685); +#399479 = AXIS2_PLACEMENT_3D('',#399480,#399481,#399482); +#399480 = CARTESIAN_POINT('',(121.54999895968,-110.6999989596,0.)); +#399481 = DIRECTION('',(0.,0.,-1.)); +#399482 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#399483 = CYLINDRICAL_SURFACE('',#399484,0.249998959685); +#399484 = AXIS2_PLACEMENT_3D('',#399485,#399486,#399487); +#399485 = CARTESIAN_POINT('',(121.54999895968,-110.6999989596,0.)); +#399486 = DIRECTION('',(-0.,-0.,1.)); +#399487 = DIRECTION('',(-0.999999999991,-4.161285837066E-06,-0.)); +#399488 = ADVANCED_FACE('',(#399489),#399514,.F.); +#399489 = FACE_BOUND('',#399490,.F.); +#399490 = EDGE_LOOP('',(#399491,#399492,#399500,#399508)); +#399491 = ORIENTED_EDGE('',*,*,#399469,.T.); +#399492 = ORIENTED_EDGE('',*,*,#399493,.T.); +#399493 = EDGE_CURVE('',#399461,#399494,#399496,.T.); +#399494 = VERTEX_POINT('',#399495); +#399495 = CARTESIAN_POINT('',(122.5,-110.45,-4.E-02)); +#399496 = LINE('',#399497,#399498); +#399497 = CARTESIAN_POINT('',(121.55,-110.45,-4.E-02)); +#399498 = VECTOR('',#399499,1.); +#399499 = DIRECTION('',(1.,0.,0.)); +#399500 = ORIENTED_EDGE('',*,*,#399501,.F.); +#399501 = EDGE_CURVE('',#399502,#399494,#399504,.T.); +#399502 = VERTEX_POINT('',#399503); +#399503 = CARTESIAN_POINT('',(122.5,-110.45,0.)); +#399504 = LINE('',#399505,#399506); +#399505 = CARTESIAN_POINT('',(122.5,-110.45,0.)); +#399506 = VECTOR('',#399507,1.); +#399507 = DIRECTION('',(0.,0.,-1.)); +#399508 = ORIENTED_EDGE('',*,*,#399509,.F.); +#399509 = EDGE_CURVE('',#399470,#399502,#399510,.T.); +#399510 = LINE('',#399511,#399512); +#399511 = CARTESIAN_POINT('',(121.55,-110.45,0.)); +#399512 = VECTOR('',#399513,1.); +#399513 = DIRECTION('',(1.,0.,0.)); +#399514 = PLANE('',#399515); +#399515 = AXIS2_PLACEMENT_3D('',#399516,#399517,#399518); +#399516 = CARTESIAN_POINT('',(121.55,-110.45,0.)); +#399517 = DIRECTION('',(0.,-1.,0.)); +#399518 = DIRECTION('',(1.,0.,0.)); +#399519 = ADVANCED_FACE('',(#399520),#399547,.T.); +#399520 = FACE_BOUND('',#399521,.F.); +#399521 = EDGE_LOOP('',(#399522,#399523,#399532,#399540)); +#399522 = ORIENTED_EDGE('',*,*,#399501,.T.); +#399523 = ORIENTED_EDGE('',*,*,#399524,.T.); +#399524 = EDGE_CURVE('',#399494,#399525,#399527,.T.); +#399525 = VERTEX_POINT('',#399526); +#399526 = CARTESIAN_POINT('',(122.75,-110.7,-4.E-02)); +#399527 = CIRCLE('',#399528,0.249998959685); +#399528 = AXIS2_PLACEMENT_3D('',#399529,#399530,#399531); +#399529 = CARTESIAN_POINT('',(122.50000104031,-110.6999989596,-4.E-02)); +#399530 = DIRECTION('',(0.,0.,-1.)); +#399531 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399532 = ORIENTED_EDGE('',*,*,#399533,.F.); +#399533 = EDGE_CURVE('',#399534,#399525,#399536,.T.); +#399534 = VERTEX_POINT('',#399535); +#399535 = CARTESIAN_POINT('',(122.75,-110.7,0.)); +#399536 = LINE('',#399537,#399538); +#399537 = CARTESIAN_POINT('',(122.75,-110.7,0.)); +#399538 = VECTOR('',#399539,1.); +#399539 = DIRECTION('',(0.,0.,-1.)); +#399540 = ORIENTED_EDGE('',*,*,#399541,.F.); +#399541 = EDGE_CURVE('',#399502,#399534,#399542,.T.); +#399542 = CIRCLE('',#399543,0.249998959685); +#399543 = AXIS2_PLACEMENT_3D('',#399544,#399545,#399546); +#399544 = CARTESIAN_POINT('',(122.50000104031,-110.6999989596,0.)); +#399545 = DIRECTION('',(0.,0.,-1.)); +#399546 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399547 = CYLINDRICAL_SURFACE('',#399548,0.249998959685); +#399548 = AXIS2_PLACEMENT_3D('',#399549,#399550,#399551); +#399549 = CARTESIAN_POINT('',(122.50000104031,-110.6999989596,0.)); +#399550 = DIRECTION('',(-0.,-0.,1.)); +#399551 = DIRECTION('',(-4.16128589391E-06,0.999999999991,0.)); +#399552 = ADVANCED_FACE('',(#399553),#399578,.F.); +#399553 = FACE_BOUND('',#399554,.F.); +#399554 = EDGE_LOOP('',(#399555,#399556,#399564,#399572)); +#399555 = ORIENTED_EDGE('',*,*,#399533,.T.); +#399556 = ORIENTED_EDGE('',*,*,#399557,.T.); +#399557 = EDGE_CURVE('',#399525,#399558,#399560,.T.); +#399558 = VERTEX_POINT('',#399559); +#399559 = CARTESIAN_POINT('',(122.75,-111.2,-4.E-02)); +#399560 = LINE('',#399561,#399562); +#399561 = CARTESIAN_POINT('',(122.75,-110.7,-4.E-02)); +#399562 = VECTOR('',#399563,1.); +#399563 = DIRECTION('',(0.,-1.,0.)); +#399564 = ORIENTED_EDGE('',*,*,#399565,.F.); +#399565 = EDGE_CURVE('',#399566,#399558,#399568,.T.); +#399566 = VERTEX_POINT('',#399567); +#399567 = CARTESIAN_POINT('',(122.75,-111.2,0.)); +#399568 = LINE('',#399569,#399570); +#399569 = CARTESIAN_POINT('',(122.75,-111.2,0.)); +#399570 = VECTOR('',#399571,1.); +#399571 = DIRECTION('',(0.,0.,-1.)); +#399572 = ORIENTED_EDGE('',*,*,#399573,.F.); +#399573 = EDGE_CURVE('',#399534,#399566,#399574,.T.); +#399574 = LINE('',#399575,#399576); +#399575 = CARTESIAN_POINT('',(122.75,-110.7,0.)); +#399576 = VECTOR('',#399577,1.); +#399577 = DIRECTION('',(0.,-1.,0.)); +#399578 = PLANE('',#399579); +#399579 = AXIS2_PLACEMENT_3D('',#399580,#399581,#399582); +#399580 = CARTESIAN_POINT('',(122.75,-110.7,0.)); +#399581 = DIRECTION('',(-1.,-0.,-0.)); +#399582 = DIRECTION('',(0.,-1.,0.)); +#399583 = ADVANCED_FACE('',(#399584),#399611,.T.); +#399584 = FACE_BOUND('',#399585,.F.); +#399585 = EDGE_LOOP('',(#399586,#399587,#399596,#399604)); +#399586 = ORIENTED_EDGE('',*,*,#399565,.T.); +#399587 = ORIENTED_EDGE('',*,*,#399588,.T.); +#399588 = EDGE_CURVE('',#399558,#399589,#399591,.T.); +#399589 = VERTEX_POINT('',#399590); +#399590 = CARTESIAN_POINT('',(122.5,-111.45,-4.E-02)); +#399591 = CIRCLE('',#399592,0.249998959685); +#399592 = AXIS2_PLACEMENT_3D('',#399593,#399594,#399595); +#399593 = CARTESIAN_POINT('',(122.50000104031,-111.2000010403,-4.E-02)); +#399594 = DIRECTION('',(0.,0.,-1.)); +#399595 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#399596 = ORIENTED_EDGE('',*,*,#399597,.F.); +#399597 = EDGE_CURVE('',#399598,#399589,#399600,.T.); +#399598 = VERTEX_POINT('',#399599); +#399599 = CARTESIAN_POINT('',(122.5,-111.45,0.)); +#399600 = LINE('',#399601,#399602); +#399601 = CARTESIAN_POINT('',(122.5,-111.45,0.)); +#399602 = VECTOR('',#399603,1.); +#399603 = DIRECTION('',(0.,0.,-1.)); +#399604 = ORIENTED_EDGE('',*,*,#399605,.F.); +#399605 = EDGE_CURVE('',#399566,#399598,#399606,.T.); +#399606 = CIRCLE('',#399607,0.249998959685); +#399607 = AXIS2_PLACEMENT_3D('',#399608,#399609,#399610); +#399608 = CARTESIAN_POINT('',(122.50000104031,-111.2000010403,0.)); +#399609 = DIRECTION('',(0.,0.,-1.)); +#399610 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#399611 = CYLINDRICAL_SURFACE('',#399612,0.249998959685); +#399612 = AXIS2_PLACEMENT_3D('',#399613,#399614,#399615); +#399613 = CARTESIAN_POINT('',(122.50000104031,-111.2000010403,0.)); +#399614 = DIRECTION('',(-0.,-0.,1.)); +#399615 = DIRECTION('',(0.999999999991,4.161285837067E-06,0.)); +#399616 = ADVANCED_FACE('',(#399617),#399642,.F.); +#399617 = FACE_BOUND('',#399618,.F.); +#399618 = EDGE_LOOP('',(#399619,#399620,#399628,#399636)); +#399619 = ORIENTED_EDGE('',*,*,#399597,.T.); +#399620 = ORIENTED_EDGE('',*,*,#399621,.T.); +#399621 = EDGE_CURVE('',#399589,#399622,#399624,.T.); +#399622 = VERTEX_POINT('',#399623); +#399623 = CARTESIAN_POINT('',(121.55,-111.45,-4.E-02)); +#399624 = LINE('',#399625,#399626); +#399625 = CARTESIAN_POINT('',(122.5,-111.45,-4.E-02)); +#399626 = VECTOR('',#399627,1.); +#399627 = DIRECTION('',(-1.,0.,0.)); +#399628 = ORIENTED_EDGE('',*,*,#399629,.F.); +#399629 = EDGE_CURVE('',#399630,#399622,#399632,.T.); +#399630 = VERTEX_POINT('',#399631); +#399631 = CARTESIAN_POINT('',(121.55,-111.45,0.)); +#399632 = LINE('',#399633,#399634); +#399633 = CARTESIAN_POINT('',(121.55,-111.45,0.)); +#399634 = VECTOR('',#399635,1.); +#399635 = DIRECTION('',(0.,0.,-1.)); +#399636 = ORIENTED_EDGE('',*,*,#399637,.F.); +#399637 = EDGE_CURVE('',#399598,#399630,#399638,.T.); +#399638 = LINE('',#399639,#399640); +#399639 = CARTESIAN_POINT('',(122.5,-111.45,0.)); +#399640 = VECTOR('',#399641,1.); +#399641 = DIRECTION('',(-1.,0.,0.)); +#399642 = PLANE('',#399643); +#399643 = AXIS2_PLACEMENT_3D('',#399644,#399645,#399646); +#399644 = CARTESIAN_POINT('',(122.5,-111.45,0.)); +#399645 = DIRECTION('',(0.,1.,0.)); +#399646 = DIRECTION('',(-1.,0.,0.)); +#399647 = ADVANCED_FACE('',(#399648),#399675,.T.); +#399648 = FACE_BOUND('',#399649,.F.); +#399649 = EDGE_LOOP('',(#399650,#399651,#399660,#399668)); +#399650 = ORIENTED_EDGE('',*,*,#399629,.T.); +#399651 = ORIENTED_EDGE('',*,*,#399652,.T.); +#399652 = EDGE_CURVE('',#399622,#399653,#399655,.T.); +#399653 = VERTEX_POINT('',#399654); +#399654 = CARTESIAN_POINT('',(121.3,-111.2,-4.E-02)); +#399655 = CIRCLE('',#399656,0.249998959685); +#399656 = AXIS2_PLACEMENT_3D('',#399657,#399658,#399659); +#399657 = CARTESIAN_POINT('',(121.54999895968,-111.2000010403,-4.E-02)); +#399658 = DIRECTION('',(0.,0.,-1.)); +#399659 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#399660 = ORIENTED_EDGE('',*,*,#399661,.F.); +#399661 = EDGE_CURVE('',#399662,#399653,#399664,.T.); +#399662 = VERTEX_POINT('',#399663); +#399663 = CARTESIAN_POINT('',(121.3,-111.2,0.)); +#399664 = LINE('',#399665,#399666); +#399665 = CARTESIAN_POINT('',(121.3,-111.2,0.)); +#399666 = VECTOR('',#399667,1.); +#399667 = DIRECTION('',(0.,0.,-1.)); +#399668 = ORIENTED_EDGE('',*,*,#399669,.F.); +#399669 = EDGE_CURVE('',#399630,#399662,#399670,.T.); +#399670 = CIRCLE('',#399671,0.249998959685); +#399671 = AXIS2_PLACEMENT_3D('',#399672,#399673,#399674); +#399672 = CARTESIAN_POINT('',(121.54999895968,-111.2000010403,0.)); +#399673 = DIRECTION('',(0.,0.,-1.)); +#399674 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#399675 = CYLINDRICAL_SURFACE('',#399676,0.249998959685); +#399676 = AXIS2_PLACEMENT_3D('',#399677,#399678,#399679); +#399677 = CARTESIAN_POINT('',(121.54999895968,-111.2000010403,0.)); +#399678 = DIRECTION('',(-0.,-0.,1.)); +#399679 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#399680 = ADVANCED_FACE('',(#399681),#399697,.F.); +#399681 = FACE_BOUND('',#399682,.F.); +#399682 = EDGE_LOOP('',(#399683,#399684,#399690,#399691)); +#399683 = ORIENTED_EDGE('',*,*,#399661,.T.); +#399684 = ORIENTED_EDGE('',*,*,#399685,.T.); +#399685 = EDGE_CURVE('',#399653,#399453,#399686,.T.); +#399686 = LINE('',#399687,#399688); +#399687 = CARTESIAN_POINT('',(121.3,-111.2,-4.E-02)); +#399688 = VECTOR('',#399689,1.); +#399689 = DIRECTION('',(0.,1.,0.)); +#399690 = ORIENTED_EDGE('',*,*,#399450,.F.); +#399691 = ORIENTED_EDGE('',*,*,#399692,.F.); +#399692 = EDGE_CURVE('',#399662,#399451,#399693,.T.); +#399693 = LINE('',#399694,#399695); +#399694 = CARTESIAN_POINT('',(121.3,-111.2,0.)); +#399695 = VECTOR('',#399696,1.); +#399696 = DIRECTION('',(0.,1.,0.)); +#399697 = PLANE('',#399698); +#399698 = AXIS2_PLACEMENT_3D('',#399699,#399700,#399701); +#399699 = CARTESIAN_POINT('',(121.3,-111.2,0.)); +#399700 = DIRECTION('',(1.,-0.,0.)); +#399701 = DIRECTION('',(0.,1.,0.)); +#399702 = ADVANCED_FACE('',(#399703),#399713,.F.); +#399703 = FACE_BOUND('',#399704,.F.); +#399704 = EDGE_LOOP('',(#399705,#399706,#399707,#399708,#399709,#399710, + #399711,#399712)); +#399705 = ORIENTED_EDGE('',*,*,#399477,.T.); +#399706 = ORIENTED_EDGE('',*,*,#399509,.T.); +#399707 = ORIENTED_EDGE('',*,*,#399541,.T.); +#399708 = ORIENTED_EDGE('',*,*,#399573,.T.); +#399709 = ORIENTED_EDGE('',*,*,#399605,.T.); +#399710 = ORIENTED_EDGE('',*,*,#399637,.T.); +#399711 = ORIENTED_EDGE('',*,*,#399669,.T.); +#399712 = ORIENTED_EDGE('',*,*,#399692,.T.); +#399713 = PLANE('',#399714); +#399714 = AXIS2_PLACEMENT_3D('',#399715,#399716,#399717); +#399715 = CARTESIAN_POINT('',(0.,0.,0.)); +#399716 = DIRECTION('',(-0.,-0.,-1.)); +#399717 = DIRECTION('',(-1.,0.,0.)); +#399718 = ADVANCED_FACE('',(#399719),#399729,.T.); +#399719 = FACE_BOUND('',#399720,.T.); +#399720 = EDGE_LOOP('',(#399721,#399722,#399723,#399724,#399725,#399726, + #399727,#399728)); +#399721 = ORIENTED_EDGE('',*,*,#399460,.T.); +#399722 = ORIENTED_EDGE('',*,*,#399493,.T.); +#399723 = ORIENTED_EDGE('',*,*,#399524,.T.); +#399724 = ORIENTED_EDGE('',*,*,#399557,.T.); +#399725 = ORIENTED_EDGE('',*,*,#399588,.T.); +#399726 = ORIENTED_EDGE('',*,*,#399621,.T.); +#399727 = ORIENTED_EDGE('',*,*,#399652,.T.); +#399728 = ORIENTED_EDGE('',*,*,#399685,.T.); +#399729 = PLANE('',#399730); +#399730 = AXIS2_PLACEMENT_3D('',#399731,#399732,#399733); +#399731 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#399732 = DIRECTION('',(-0.,-0.,-1.)); +#399733 = DIRECTION('',(-1.,0.,0.)); +#399734 = MANIFOLD_SOLID_BREP('',#399735); +#399735 = CLOSED_SHELL('',(#399736,#399778,#399809,#399842,#399873, + #399906,#399937,#399970,#399992,#400008)); +#399736 = ADVANCED_FACE('',(#399737),#399773,.T.); +#399737 = FACE_BOUND('',#399738,.F.); +#399738 = EDGE_LOOP('',(#399739,#399749,#399758,#399766)); +#399739 = ORIENTED_EDGE('',*,*,#399740,.T.); +#399740 = EDGE_CURVE('',#399741,#399743,#399745,.T.); +#399741 = VERTEX_POINT('',#399742); +#399742 = CARTESIAN_POINT('',(151.48,-113.705,0.)); +#399743 = VERTEX_POINT('',#399744); +#399744 = CARTESIAN_POINT('',(151.48,-113.705,-4.E-02)); +#399745 = LINE('',#399746,#399747); +#399746 = CARTESIAN_POINT('',(151.48,-113.705,0.)); +#399747 = VECTOR('',#399748,1.); +#399748 = DIRECTION('',(0.,0.,-1.)); +#399749 = ORIENTED_EDGE('',*,*,#399750,.T.); +#399750 = EDGE_CURVE('',#399743,#399751,#399753,.T.); +#399751 = VERTEX_POINT('',#399752); +#399752 = CARTESIAN_POINT('',(151.615,-113.57,-4.E-02)); +#399753 = CIRCLE('',#399754,0.135001418495); +#399754 = AXIS2_PLACEMENT_3D('',#399755,#399756,#399757); +#399755 = CARTESIAN_POINT('',(151.61500141848,-113.7050014184,-4.E-02)); +#399756 = DIRECTION('',(0.,0.,-1.)); +#399757 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#399758 = ORIENTED_EDGE('',*,*,#399759,.F.); +#399759 = EDGE_CURVE('',#399760,#399751,#399762,.T.); +#399760 = VERTEX_POINT('',#399761); +#399761 = CARTESIAN_POINT('',(151.615,-113.57,0.)); +#399762 = LINE('',#399763,#399764); +#399763 = CARTESIAN_POINT('',(151.615,-113.57,0.)); +#399764 = VECTOR('',#399765,1.); +#399765 = DIRECTION('',(0.,0.,-1.)); +#399766 = ORIENTED_EDGE('',*,*,#399767,.F.); +#399767 = EDGE_CURVE('',#399741,#399760,#399768,.T.); +#399768 = CIRCLE('',#399769,0.135001418495); +#399769 = AXIS2_PLACEMENT_3D('',#399770,#399771,#399772); +#399770 = CARTESIAN_POINT('',(151.61500141848,-113.7050014184,0.)); +#399771 = DIRECTION('',(0.,0.,-1.)); +#399772 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#399773 = CYLINDRICAL_SURFACE('',#399774,0.135001418495); +#399774 = AXIS2_PLACEMENT_3D('',#399775,#399776,#399777); +#399775 = CARTESIAN_POINT('',(151.61500141848,-113.7050014184,0.)); +#399776 = DIRECTION('',(-0.,-0.,1.)); +#399777 = DIRECTION('',(-0.999999999945,1.050720662155E-05,0.)); +#399778 = ADVANCED_FACE('',(#399779),#399804,.F.); +#399779 = FACE_BOUND('',#399780,.F.); +#399780 = EDGE_LOOP('',(#399781,#399782,#399790,#399798)); +#399781 = ORIENTED_EDGE('',*,*,#399759,.T.); +#399782 = ORIENTED_EDGE('',*,*,#399783,.T.); +#399783 = EDGE_CURVE('',#399751,#399784,#399786,.T.); +#399784 = VERTEX_POINT('',#399785); +#399785 = CARTESIAN_POINT('',(151.985,-113.57,-4.E-02)); +#399786 = LINE('',#399787,#399788); +#399787 = CARTESIAN_POINT('',(151.615,-113.57,-4.E-02)); +#399788 = VECTOR('',#399789,1.); +#399789 = DIRECTION('',(1.,0.,0.)); +#399790 = ORIENTED_EDGE('',*,*,#399791,.F.); +#399791 = EDGE_CURVE('',#399792,#399784,#399794,.T.); +#399792 = VERTEX_POINT('',#399793); +#399793 = CARTESIAN_POINT('',(151.985,-113.57,0.)); +#399794 = LINE('',#399795,#399796); +#399795 = CARTESIAN_POINT('',(151.985,-113.57,0.)); +#399796 = VECTOR('',#399797,1.); +#399797 = DIRECTION('',(0.,0.,-1.)); +#399798 = ORIENTED_EDGE('',*,*,#399799,.F.); +#399799 = EDGE_CURVE('',#399760,#399792,#399800,.T.); +#399800 = LINE('',#399801,#399802); +#399801 = CARTESIAN_POINT('',(151.615,-113.57,0.)); +#399802 = VECTOR('',#399803,1.); +#399803 = DIRECTION('',(1.,0.,0.)); +#399804 = PLANE('',#399805); +#399805 = AXIS2_PLACEMENT_3D('',#399806,#399807,#399808); +#399806 = CARTESIAN_POINT('',(151.615,-113.57,0.)); +#399807 = DIRECTION('',(0.,-1.,0.)); +#399808 = DIRECTION('',(1.,0.,0.)); +#399809 = ADVANCED_FACE('',(#399810),#399837,.T.); +#399810 = FACE_BOUND('',#399811,.F.); +#399811 = EDGE_LOOP('',(#399812,#399813,#399822,#399830)); +#399812 = ORIENTED_EDGE('',*,*,#399791,.T.); +#399813 = ORIENTED_EDGE('',*,*,#399814,.T.); +#399814 = EDGE_CURVE('',#399784,#399815,#399817,.T.); +#399815 = VERTEX_POINT('',#399816); +#399816 = CARTESIAN_POINT('',(152.12,-113.705,-4.E-02)); +#399817 = CIRCLE('',#399818,0.135001418495); +#399818 = AXIS2_PLACEMENT_3D('',#399819,#399820,#399821); +#399819 = CARTESIAN_POINT('',(151.98499858151,-113.7050014184,-4.E-02)); +#399820 = DIRECTION('',(0.,0.,-1.)); +#399821 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#399822 = ORIENTED_EDGE('',*,*,#399823,.F.); +#399823 = EDGE_CURVE('',#399824,#399815,#399826,.T.); +#399824 = VERTEX_POINT('',#399825); +#399825 = CARTESIAN_POINT('',(152.12,-113.705,0.)); +#399826 = LINE('',#399827,#399828); +#399827 = CARTESIAN_POINT('',(152.12,-113.705,0.)); +#399828 = VECTOR('',#399829,1.); +#399829 = DIRECTION('',(0.,0.,-1.)); +#399830 = ORIENTED_EDGE('',*,*,#399831,.F.); +#399831 = EDGE_CURVE('',#399792,#399824,#399832,.T.); +#399832 = CIRCLE('',#399833,0.135001418495); +#399833 = AXIS2_PLACEMENT_3D('',#399834,#399835,#399836); +#399834 = CARTESIAN_POINT('',(151.98499858151,-113.7050014184,0.)); +#399835 = DIRECTION('',(0.,0.,-1.)); +#399836 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#399837 = CYLINDRICAL_SURFACE('',#399838,0.135001418495); +#399838 = AXIS2_PLACEMENT_3D('',#399839,#399840,#399841); +#399839 = CARTESIAN_POINT('',(151.98499858151,-113.7050014184,0.)); +#399840 = DIRECTION('',(-0.,-0.,1.)); +#399841 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#399842 = ADVANCED_FACE('',(#399843),#399868,.F.); +#399843 = FACE_BOUND('',#399844,.F.); +#399844 = EDGE_LOOP('',(#399845,#399846,#399854,#399862)); +#399845 = ORIENTED_EDGE('',*,*,#399823,.T.); +#399846 = ORIENTED_EDGE('',*,*,#399847,.T.); +#399847 = EDGE_CURVE('',#399815,#399848,#399850,.T.); +#399848 = VERTEX_POINT('',#399849); +#399849 = CARTESIAN_POINT('',(152.12,-113.975,-4.E-02)); +#399850 = LINE('',#399851,#399852); +#399851 = CARTESIAN_POINT('',(152.12,-113.705,-4.E-02)); +#399852 = VECTOR('',#399853,1.); +#399853 = DIRECTION('',(0.,-1.,0.)); +#399854 = ORIENTED_EDGE('',*,*,#399855,.F.); +#399855 = EDGE_CURVE('',#399856,#399848,#399858,.T.); +#399856 = VERTEX_POINT('',#399857); +#399857 = CARTESIAN_POINT('',(152.12,-113.975,0.)); +#399858 = LINE('',#399859,#399860); +#399859 = CARTESIAN_POINT('',(152.12,-113.975,0.)); +#399860 = VECTOR('',#399861,1.); +#399861 = DIRECTION('',(0.,0.,-1.)); +#399862 = ORIENTED_EDGE('',*,*,#399863,.F.); +#399863 = EDGE_CURVE('',#399824,#399856,#399864,.T.); +#399864 = LINE('',#399865,#399866); +#399865 = CARTESIAN_POINT('',(152.12,-113.705,0.)); +#399866 = VECTOR('',#399867,1.); +#399867 = DIRECTION('',(0.,-1.,0.)); +#399868 = PLANE('',#399869); +#399869 = AXIS2_PLACEMENT_3D('',#399870,#399871,#399872); +#399870 = CARTESIAN_POINT('',(152.12,-113.705,0.)); +#399871 = DIRECTION('',(-1.,-0.,-0.)); +#399872 = DIRECTION('',(0.,-1.,0.)); +#399873 = ADVANCED_FACE('',(#399874),#399901,.T.); +#399874 = FACE_BOUND('',#399875,.F.); +#399875 = EDGE_LOOP('',(#399876,#399877,#399886,#399894)); +#399876 = ORIENTED_EDGE('',*,*,#399855,.T.); +#399877 = ORIENTED_EDGE('',*,*,#399878,.T.); +#399878 = EDGE_CURVE('',#399848,#399879,#399881,.T.); +#399879 = VERTEX_POINT('',#399880); +#399880 = CARTESIAN_POINT('',(151.985,-114.11,-4.E-02)); +#399881 = CIRCLE('',#399882,0.135001418495); +#399882 = AXIS2_PLACEMENT_3D('',#399883,#399884,#399885); +#399883 = CARTESIAN_POINT('',(151.98499858151,-113.9749985815,-4.E-02)); +#399884 = DIRECTION('',(0.,0.,-1.)); +#399885 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#399886 = ORIENTED_EDGE('',*,*,#399887,.F.); +#399887 = EDGE_CURVE('',#399888,#399879,#399890,.T.); +#399888 = VERTEX_POINT('',#399889); +#399889 = CARTESIAN_POINT('',(151.985,-114.11,0.)); +#399890 = LINE('',#399891,#399892); +#399891 = CARTESIAN_POINT('',(151.985,-114.11,0.)); +#399892 = VECTOR('',#399893,1.); +#399893 = DIRECTION('',(0.,0.,-1.)); +#399894 = ORIENTED_EDGE('',*,*,#399895,.F.); +#399895 = EDGE_CURVE('',#399856,#399888,#399896,.T.); +#399896 = CIRCLE('',#399897,0.135001418495); +#399897 = AXIS2_PLACEMENT_3D('',#399898,#399899,#399900); +#399898 = CARTESIAN_POINT('',(151.98499858151,-113.9749985815,0.)); +#399899 = DIRECTION('',(0.,0.,-1.)); +#399900 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#399901 = CYLINDRICAL_SURFACE('',#399902,0.135001418495); +#399902 = AXIS2_PLACEMENT_3D('',#399903,#399904,#399905); +#399903 = CARTESIAN_POINT('',(151.98499858151,-113.9749985815,0.)); +#399904 = DIRECTION('',(-0.,-0.,1.)); +#399905 = DIRECTION('',(0.999999999945,-1.050720662155E-05,0.)); +#399906 = ADVANCED_FACE('',(#399907),#399932,.F.); +#399907 = FACE_BOUND('',#399908,.F.); +#399908 = EDGE_LOOP('',(#399909,#399910,#399918,#399926)); +#399909 = ORIENTED_EDGE('',*,*,#399887,.T.); +#399910 = ORIENTED_EDGE('',*,*,#399911,.T.); +#399911 = EDGE_CURVE('',#399879,#399912,#399914,.T.); +#399912 = VERTEX_POINT('',#399913); +#399913 = CARTESIAN_POINT('',(151.615,-114.11,-4.E-02)); +#399914 = LINE('',#399915,#399916); +#399915 = CARTESIAN_POINT('',(151.985,-114.11,-4.E-02)); +#399916 = VECTOR('',#399917,1.); +#399917 = DIRECTION('',(-1.,0.,0.)); +#399918 = ORIENTED_EDGE('',*,*,#399919,.F.); +#399919 = EDGE_CURVE('',#399920,#399912,#399922,.T.); +#399920 = VERTEX_POINT('',#399921); +#399921 = CARTESIAN_POINT('',(151.615,-114.11,0.)); +#399922 = LINE('',#399923,#399924); +#399923 = CARTESIAN_POINT('',(151.615,-114.11,0.)); +#399924 = VECTOR('',#399925,1.); +#399925 = DIRECTION('',(0.,0.,-1.)); +#399926 = ORIENTED_EDGE('',*,*,#399927,.F.); +#399927 = EDGE_CURVE('',#399888,#399920,#399928,.T.); +#399928 = LINE('',#399929,#399930); +#399929 = CARTESIAN_POINT('',(151.985,-114.11,0.)); +#399930 = VECTOR('',#399931,1.); +#399931 = DIRECTION('',(-1.,0.,0.)); +#399932 = PLANE('',#399933); +#399933 = AXIS2_PLACEMENT_3D('',#399934,#399935,#399936); +#399934 = CARTESIAN_POINT('',(151.985,-114.11,0.)); +#399935 = DIRECTION('',(0.,1.,0.)); +#399936 = DIRECTION('',(-1.,0.,0.)); +#399937 = ADVANCED_FACE('',(#399938),#399965,.T.); +#399938 = FACE_BOUND('',#399939,.F.); +#399939 = EDGE_LOOP('',(#399940,#399941,#399950,#399958)); +#399940 = ORIENTED_EDGE('',*,*,#399919,.T.); +#399941 = ORIENTED_EDGE('',*,*,#399942,.T.); +#399942 = EDGE_CURVE('',#399912,#399943,#399945,.T.); +#399943 = VERTEX_POINT('',#399944); +#399944 = CARTESIAN_POINT('',(151.48,-113.975,-4.E-02)); +#399945 = CIRCLE('',#399946,0.135001418495); +#399946 = AXIS2_PLACEMENT_3D('',#399947,#399948,#399949); +#399947 = CARTESIAN_POINT('',(151.61500141848,-113.9749985815,-4.E-02)); +#399948 = DIRECTION('',(0.,0.,-1.)); +#399949 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#399950 = ORIENTED_EDGE('',*,*,#399951,.F.); +#399951 = EDGE_CURVE('',#399952,#399943,#399954,.T.); +#399952 = VERTEX_POINT('',#399953); +#399953 = CARTESIAN_POINT('',(151.48,-113.975,0.)); +#399954 = LINE('',#399955,#399956); +#399955 = CARTESIAN_POINT('',(151.48,-113.975,0.)); +#399956 = VECTOR('',#399957,1.); +#399957 = DIRECTION('',(0.,0.,-1.)); +#399958 = ORIENTED_EDGE('',*,*,#399959,.F.); +#399959 = EDGE_CURVE('',#399920,#399952,#399960,.T.); +#399960 = CIRCLE('',#399961,0.135001418495); +#399961 = AXIS2_PLACEMENT_3D('',#399962,#399963,#399964); +#399962 = CARTESIAN_POINT('',(151.61500141848,-113.9749985815,0.)); +#399963 = DIRECTION('',(0.,0.,-1.)); +#399964 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#399965 = CYLINDRICAL_SURFACE('',#399966,0.135001418495); +#399966 = AXIS2_PLACEMENT_3D('',#399967,#399968,#399969); +#399967 = CARTESIAN_POINT('',(151.61500141848,-113.9749985815,0.)); +#399968 = DIRECTION('',(-0.,-0.,1.)); +#399969 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#399970 = ADVANCED_FACE('',(#399971),#399987,.F.); +#399971 = FACE_BOUND('',#399972,.F.); +#399972 = EDGE_LOOP('',(#399973,#399974,#399980,#399981)); +#399973 = ORIENTED_EDGE('',*,*,#399951,.T.); +#399974 = ORIENTED_EDGE('',*,*,#399975,.T.); +#399975 = EDGE_CURVE('',#399943,#399743,#399976,.T.); +#399976 = LINE('',#399977,#399978); +#399977 = CARTESIAN_POINT('',(151.48,-113.975,-4.E-02)); +#399978 = VECTOR('',#399979,1.); +#399979 = DIRECTION('',(0.,1.,0.)); +#399980 = ORIENTED_EDGE('',*,*,#399740,.F.); +#399981 = ORIENTED_EDGE('',*,*,#399982,.F.); +#399982 = EDGE_CURVE('',#399952,#399741,#399983,.T.); +#399983 = LINE('',#399984,#399985); +#399984 = CARTESIAN_POINT('',(151.48,-113.975,0.)); +#399985 = VECTOR('',#399986,1.); +#399986 = DIRECTION('',(0.,1.,0.)); +#399987 = PLANE('',#399988); +#399988 = AXIS2_PLACEMENT_3D('',#399989,#399990,#399991); +#399989 = CARTESIAN_POINT('',(151.48,-113.975,0.)); +#399990 = DIRECTION('',(1.,-0.,0.)); +#399991 = DIRECTION('',(0.,1.,0.)); +#399992 = ADVANCED_FACE('',(#399993),#400003,.F.); +#399993 = FACE_BOUND('',#399994,.F.); +#399994 = EDGE_LOOP('',(#399995,#399996,#399997,#399998,#399999,#400000, + #400001,#400002)); +#399995 = ORIENTED_EDGE('',*,*,#399767,.T.); +#399996 = ORIENTED_EDGE('',*,*,#399799,.T.); +#399997 = ORIENTED_EDGE('',*,*,#399831,.T.); +#399998 = ORIENTED_EDGE('',*,*,#399863,.T.); +#399999 = ORIENTED_EDGE('',*,*,#399895,.T.); +#400000 = ORIENTED_EDGE('',*,*,#399927,.T.); +#400001 = ORIENTED_EDGE('',*,*,#399959,.T.); +#400002 = ORIENTED_EDGE('',*,*,#399982,.T.); +#400003 = PLANE('',#400004); +#400004 = AXIS2_PLACEMENT_3D('',#400005,#400006,#400007); +#400005 = CARTESIAN_POINT('',(0.,0.,0.)); +#400006 = DIRECTION('',(-0.,-0.,-1.)); +#400007 = DIRECTION('',(-1.,0.,0.)); +#400008 = ADVANCED_FACE('',(#400009),#400019,.T.); +#400009 = FACE_BOUND('',#400010,.T.); +#400010 = EDGE_LOOP('',(#400011,#400012,#400013,#400014,#400015,#400016, + #400017,#400018)); +#400011 = ORIENTED_EDGE('',*,*,#399750,.T.); +#400012 = ORIENTED_EDGE('',*,*,#399783,.T.); +#400013 = ORIENTED_EDGE('',*,*,#399814,.T.); +#400014 = ORIENTED_EDGE('',*,*,#399847,.T.); +#400015 = ORIENTED_EDGE('',*,*,#399878,.T.); +#400016 = ORIENTED_EDGE('',*,*,#399911,.T.); +#400017 = ORIENTED_EDGE('',*,*,#399942,.T.); +#400018 = ORIENTED_EDGE('',*,*,#399975,.T.); +#400019 = PLANE('',#400020); +#400020 = AXIS2_PLACEMENT_3D('',#400021,#400022,#400023); +#400021 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#400022 = DIRECTION('',(-0.,-0.,-1.)); +#400023 = DIRECTION('',(-1.,0.,0.)); +#400024 = MANIFOLD_SOLID_BREP('',#400025); +#400025 = CLOSED_SHELL('',(#400026,#400068,#400099,#400132,#400163, + #400196,#400227,#400260,#400282,#400298)); +#400026 = ADVANCED_FACE('',(#400027),#400063,.T.); +#400027 = FACE_BOUND('',#400028,.F.); +#400028 = EDGE_LOOP('',(#400029,#400039,#400048,#400056)); +#400029 = ORIENTED_EDGE('',*,*,#400030,.T.); +#400030 = EDGE_CURVE('',#400031,#400033,#400035,.T.); +#400031 = VERTEX_POINT('',#400032); +#400032 = CARTESIAN_POINT('',(142.15,-76.475,0.)); +#400033 = VERTEX_POINT('',#400034); +#400034 = CARTESIAN_POINT('',(142.15,-76.475,-4.E-02)); +#400035 = LINE('',#400036,#400037); +#400036 = CARTESIAN_POINT('',(142.15,-76.475,0.)); +#400037 = VECTOR('',#400038,1.); +#400038 = DIRECTION('',(0.,0.,-1.)); +#400039 = ORIENTED_EDGE('',*,*,#400040,.T.); +#400040 = EDGE_CURVE('',#400033,#400041,#400043,.T.); +#400041 = VERTEX_POINT('',#400042); +#400042 = CARTESIAN_POINT('',(142.2375,-76.3875,-4.E-02)); +#400043 = CIRCLE('',#400044,8.749946518206E-02); +#400044 = AXIS2_PLACEMENT_3D('',#400045,#400046,#400047); +#400045 = CARTESIAN_POINT('',(142.23749946518,-76.47499946518,-4.E-02)); +#400046 = DIRECTION('',(0.,0.,-1.)); +#400047 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400048 = ORIENTED_EDGE('',*,*,#400049,.F.); +#400049 = EDGE_CURVE('',#400050,#400041,#400052,.T.); +#400050 = VERTEX_POINT('',#400051); +#400051 = CARTESIAN_POINT('',(142.2375,-76.3875,0.)); +#400052 = LINE('',#400053,#400054); +#400053 = CARTESIAN_POINT('',(142.2375,-76.3875,0.)); +#400054 = VECTOR('',#400055,1.); +#400055 = DIRECTION('',(0.,0.,-1.)); +#400056 = ORIENTED_EDGE('',*,*,#400057,.F.); +#400057 = EDGE_CURVE('',#400031,#400050,#400058,.T.); +#400058 = CIRCLE('',#400059,8.749946518206E-02); +#400059 = AXIS2_PLACEMENT_3D('',#400060,#400061,#400062); +#400060 = CARTESIAN_POINT('',(142.23749946518,-76.47499946518,0.)); +#400061 = DIRECTION('',(0.,0.,-1.)); +#400062 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400063 = CYLINDRICAL_SURFACE('',#400064,8.749946518206E-02); +#400064 = AXIS2_PLACEMENT_3D('',#400065,#400066,#400067); +#400065 = CARTESIAN_POINT('',(142.23749946518,-76.47499946518,0.)); +#400066 = DIRECTION('',(-0.,-0.,1.)); +#400067 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400068 = ADVANCED_FACE('',(#400069),#400094,.F.); +#400069 = FACE_BOUND('',#400070,.F.); +#400070 = EDGE_LOOP('',(#400071,#400072,#400080,#400088)); +#400071 = ORIENTED_EDGE('',*,*,#400049,.T.); +#400072 = ORIENTED_EDGE('',*,*,#400073,.T.); +#400073 = EDGE_CURVE('',#400041,#400074,#400076,.T.); +#400074 = VERTEX_POINT('',#400075); +#400075 = CARTESIAN_POINT('',(142.6875,-76.3875,-4.E-02)); +#400076 = LINE('',#400077,#400078); +#400077 = CARTESIAN_POINT('',(142.2375,-76.3875,-4.E-02)); +#400078 = VECTOR('',#400079,1.); +#400079 = DIRECTION('',(1.,0.,0.)); +#400080 = ORIENTED_EDGE('',*,*,#400081,.F.); +#400081 = EDGE_CURVE('',#400082,#400074,#400084,.T.); +#400082 = VERTEX_POINT('',#400083); +#400083 = CARTESIAN_POINT('',(142.6875,-76.3875,0.)); +#400084 = LINE('',#400085,#400086); +#400085 = CARTESIAN_POINT('',(142.6875,-76.3875,0.)); +#400086 = VECTOR('',#400087,1.); +#400087 = DIRECTION('',(0.,0.,-1.)); +#400088 = ORIENTED_EDGE('',*,*,#400089,.F.); +#400089 = EDGE_CURVE('',#400050,#400082,#400090,.T.); +#400090 = LINE('',#400091,#400092); +#400091 = CARTESIAN_POINT('',(142.2375,-76.3875,0.)); +#400092 = VECTOR('',#400093,1.); +#400093 = DIRECTION('',(1.,0.,0.)); +#400094 = PLANE('',#400095); +#400095 = AXIS2_PLACEMENT_3D('',#400096,#400097,#400098); +#400096 = CARTESIAN_POINT('',(142.2375,-76.3875,0.)); +#400097 = DIRECTION('',(0.,-1.,0.)); +#400098 = DIRECTION('',(1.,0.,0.)); +#400099 = ADVANCED_FACE('',(#400100),#400127,.T.); +#400100 = FACE_BOUND('',#400101,.F.); +#400101 = EDGE_LOOP('',(#400102,#400103,#400112,#400120)); +#400102 = ORIENTED_EDGE('',*,*,#400081,.T.); +#400103 = ORIENTED_EDGE('',*,*,#400104,.T.); +#400104 = EDGE_CURVE('',#400074,#400105,#400107,.T.); +#400105 = VERTEX_POINT('',#400106); +#400106 = CARTESIAN_POINT('',(142.775,-76.475,-4.E-02)); +#400107 = CIRCLE('',#400108,8.749946518209E-02); +#400108 = AXIS2_PLACEMENT_3D('',#400109,#400110,#400111); +#400109 = CARTESIAN_POINT('',(142.68750053482,-76.47499946518,-4.E-02)); +#400110 = DIRECTION('',(0.,0.,-1.)); +#400111 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400112 = ORIENTED_EDGE('',*,*,#400113,.F.); +#400113 = EDGE_CURVE('',#400114,#400105,#400116,.T.); +#400114 = VERTEX_POINT('',#400115); +#400115 = CARTESIAN_POINT('',(142.775,-76.475,0.)); +#400116 = LINE('',#400117,#400118); +#400117 = CARTESIAN_POINT('',(142.775,-76.475,0.)); +#400118 = VECTOR('',#400119,1.); +#400119 = DIRECTION('',(0.,0.,-1.)); +#400120 = ORIENTED_EDGE('',*,*,#400121,.F.); +#400121 = EDGE_CURVE('',#400082,#400114,#400122,.T.); +#400122 = CIRCLE('',#400123,8.749946518209E-02); +#400123 = AXIS2_PLACEMENT_3D('',#400124,#400125,#400126); +#400124 = CARTESIAN_POINT('',(142.68750053482,-76.47499946518,0.)); +#400125 = DIRECTION('',(0.,0.,-1.)); +#400126 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400127 = CYLINDRICAL_SURFACE('',#400128,8.749946518209E-02); +#400128 = AXIS2_PLACEMENT_3D('',#400129,#400130,#400131); +#400129 = CARTESIAN_POINT('',(142.68750053482,-76.47499946518,0.)); +#400130 = DIRECTION('',(-0.,-0.,1.)); +#400131 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400132 = ADVANCED_FACE('',(#400133),#400158,.F.); +#400133 = FACE_BOUND('',#400134,.F.); +#400134 = EDGE_LOOP('',(#400135,#400136,#400144,#400152)); +#400135 = ORIENTED_EDGE('',*,*,#400113,.T.); +#400136 = ORIENTED_EDGE('',*,*,#400137,.T.); +#400137 = EDGE_CURVE('',#400105,#400138,#400140,.T.); +#400138 = VERTEX_POINT('',#400139); +#400139 = CARTESIAN_POINT('',(142.775,-76.65,-4.E-02)); +#400140 = LINE('',#400141,#400142); +#400141 = CARTESIAN_POINT('',(142.775,-76.475,-4.E-02)); +#400142 = VECTOR('',#400143,1.); +#400143 = DIRECTION('',(0.,-1.,0.)); +#400144 = ORIENTED_EDGE('',*,*,#400145,.F.); +#400145 = EDGE_CURVE('',#400146,#400138,#400148,.T.); +#400146 = VERTEX_POINT('',#400147); +#400147 = CARTESIAN_POINT('',(142.775,-76.65,0.)); +#400148 = LINE('',#400149,#400150); +#400149 = CARTESIAN_POINT('',(142.775,-76.65,0.)); +#400150 = VECTOR('',#400151,1.); +#400151 = DIRECTION('',(0.,0.,-1.)); +#400152 = ORIENTED_EDGE('',*,*,#400153,.F.); +#400153 = EDGE_CURVE('',#400114,#400146,#400154,.T.); +#400154 = LINE('',#400155,#400156); +#400155 = CARTESIAN_POINT('',(142.775,-76.475,0.)); +#400156 = VECTOR('',#400157,1.); +#400157 = DIRECTION('',(0.,-1.,0.)); +#400158 = PLANE('',#400159); +#400159 = AXIS2_PLACEMENT_3D('',#400160,#400161,#400162); +#400160 = CARTESIAN_POINT('',(142.775,-76.475,0.)); +#400161 = DIRECTION('',(-1.,-0.,-0.)); +#400162 = DIRECTION('',(0.,-1.,0.)); +#400163 = ADVANCED_FACE('',(#400164),#400191,.T.); +#400164 = FACE_BOUND('',#400165,.F.); +#400165 = EDGE_LOOP('',(#400166,#400167,#400176,#400184)); +#400166 = ORIENTED_EDGE('',*,*,#400145,.T.); +#400167 = ORIENTED_EDGE('',*,*,#400168,.T.); +#400168 = EDGE_CURVE('',#400138,#400169,#400171,.T.); +#400169 = VERTEX_POINT('',#400170); +#400170 = CARTESIAN_POINT('',(142.6875,-76.7375,-4.E-02)); +#400171 = CIRCLE('',#400172,8.749946518209E-02); +#400172 = AXIS2_PLACEMENT_3D('',#400173,#400174,#400175); +#400173 = CARTESIAN_POINT('',(142.68750053482,-76.65000053482,-4.E-02)); +#400174 = DIRECTION('',(0.,0.,-1.)); +#400175 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400176 = ORIENTED_EDGE('',*,*,#400177,.F.); +#400177 = EDGE_CURVE('',#400178,#400169,#400180,.T.); +#400178 = VERTEX_POINT('',#400179); +#400179 = CARTESIAN_POINT('',(142.6875,-76.7375,0.)); +#400180 = LINE('',#400181,#400182); +#400181 = CARTESIAN_POINT('',(142.6875,-76.7375,0.)); +#400182 = VECTOR('',#400183,1.); +#400183 = DIRECTION('',(0.,0.,-1.)); +#400184 = ORIENTED_EDGE('',*,*,#400185,.F.); +#400185 = EDGE_CURVE('',#400146,#400178,#400186,.T.); +#400186 = CIRCLE('',#400187,8.749946518209E-02); +#400187 = AXIS2_PLACEMENT_3D('',#400188,#400189,#400190); +#400188 = CARTESIAN_POINT('',(142.68750053482,-76.65000053482,0.)); +#400189 = DIRECTION('',(0.,0.,-1.)); +#400190 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400191 = CYLINDRICAL_SURFACE('',#400192,8.749946518209E-02); +#400192 = AXIS2_PLACEMENT_3D('',#400193,#400194,#400195); +#400193 = CARTESIAN_POINT('',(142.68750053482,-76.65000053482,0.)); +#400194 = DIRECTION('',(-0.,-0.,1.)); +#400195 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400196 = ADVANCED_FACE('',(#400197),#400222,.F.); +#400197 = FACE_BOUND('',#400198,.F.); +#400198 = EDGE_LOOP('',(#400199,#400200,#400208,#400216)); +#400199 = ORIENTED_EDGE('',*,*,#400177,.T.); +#400200 = ORIENTED_EDGE('',*,*,#400201,.T.); +#400201 = EDGE_CURVE('',#400169,#400202,#400204,.T.); +#400202 = VERTEX_POINT('',#400203); +#400203 = CARTESIAN_POINT('',(142.2375,-76.7375,-4.E-02)); +#400204 = LINE('',#400205,#400206); +#400205 = CARTESIAN_POINT('',(142.6875,-76.7375,-4.E-02)); +#400206 = VECTOR('',#400207,1.); +#400207 = DIRECTION('',(-1.,0.,0.)); +#400208 = ORIENTED_EDGE('',*,*,#400209,.F.); +#400209 = EDGE_CURVE('',#400210,#400202,#400212,.T.); +#400210 = VERTEX_POINT('',#400211); +#400211 = CARTESIAN_POINT('',(142.2375,-76.7375,0.)); +#400212 = LINE('',#400213,#400214); +#400213 = CARTESIAN_POINT('',(142.2375,-76.7375,0.)); +#400214 = VECTOR('',#400215,1.); +#400215 = DIRECTION('',(0.,0.,-1.)); +#400216 = ORIENTED_EDGE('',*,*,#400217,.F.); +#400217 = EDGE_CURVE('',#400178,#400210,#400218,.T.); +#400218 = LINE('',#400219,#400220); +#400219 = CARTESIAN_POINT('',(142.6875,-76.7375,0.)); +#400220 = VECTOR('',#400221,1.); +#400221 = DIRECTION('',(-1.,0.,0.)); +#400222 = PLANE('',#400223); +#400223 = AXIS2_PLACEMENT_3D('',#400224,#400225,#400226); +#400224 = CARTESIAN_POINT('',(142.6875,-76.7375,0.)); +#400225 = DIRECTION('',(0.,1.,0.)); +#400226 = DIRECTION('',(-1.,0.,0.)); +#400227 = ADVANCED_FACE('',(#400228),#400255,.T.); +#400228 = FACE_BOUND('',#400229,.F.); +#400229 = EDGE_LOOP('',(#400230,#400231,#400240,#400248)); +#400230 = ORIENTED_EDGE('',*,*,#400209,.T.); +#400231 = ORIENTED_EDGE('',*,*,#400232,.T.); +#400232 = EDGE_CURVE('',#400202,#400233,#400235,.T.); +#400233 = VERTEX_POINT('',#400234); +#400234 = CARTESIAN_POINT('',(142.15,-76.65,-4.E-02)); +#400235 = CIRCLE('',#400236,8.749946518206E-02); +#400236 = AXIS2_PLACEMENT_3D('',#400237,#400238,#400239); +#400237 = CARTESIAN_POINT('',(142.23749946518,-76.65000053482,-4.E-02)); +#400238 = DIRECTION('',(0.,0.,-1.)); +#400239 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400240 = ORIENTED_EDGE('',*,*,#400241,.F.); +#400241 = EDGE_CURVE('',#400242,#400233,#400244,.T.); +#400242 = VERTEX_POINT('',#400243); +#400243 = CARTESIAN_POINT('',(142.15,-76.65,0.)); +#400244 = LINE('',#400245,#400246); +#400245 = CARTESIAN_POINT('',(142.15,-76.65,0.)); +#400246 = VECTOR('',#400247,1.); +#400247 = DIRECTION('',(0.,0.,-1.)); +#400248 = ORIENTED_EDGE('',*,*,#400249,.F.); +#400249 = EDGE_CURVE('',#400210,#400242,#400250,.T.); +#400250 = CIRCLE('',#400251,8.749946518206E-02); +#400251 = AXIS2_PLACEMENT_3D('',#400252,#400253,#400254); +#400252 = CARTESIAN_POINT('',(142.23749946518,-76.65000053482,0.)); +#400253 = DIRECTION('',(0.,0.,-1.)); +#400254 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400255 = CYLINDRICAL_SURFACE('',#400256,8.749946518206E-02); +#400256 = AXIS2_PLACEMENT_3D('',#400257,#400258,#400259); +#400257 = CARTESIAN_POINT('',(142.23749946518,-76.65000053482,0.)); +#400258 = DIRECTION('',(-0.,-0.,1.)); +#400259 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400260 = ADVANCED_FACE('',(#400261),#400277,.F.); +#400261 = FACE_BOUND('',#400262,.F.); +#400262 = EDGE_LOOP('',(#400263,#400264,#400270,#400271)); +#400263 = ORIENTED_EDGE('',*,*,#400241,.T.); +#400264 = ORIENTED_EDGE('',*,*,#400265,.T.); +#400265 = EDGE_CURVE('',#400233,#400033,#400266,.T.); +#400266 = LINE('',#400267,#400268); +#400267 = CARTESIAN_POINT('',(142.15,-76.65,-4.E-02)); +#400268 = VECTOR('',#400269,1.); +#400269 = DIRECTION('',(0.,1.,0.)); +#400270 = ORIENTED_EDGE('',*,*,#400030,.F.); +#400271 = ORIENTED_EDGE('',*,*,#400272,.F.); +#400272 = EDGE_CURVE('',#400242,#400031,#400273,.T.); +#400273 = LINE('',#400274,#400275); +#400274 = CARTESIAN_POINT('',(142.15,-76.65,0.)); +#400275 = VECTOR('',#400276,1.); +#400276 = DIRECTION('',(0.,1.,0.)); +#400277 = PLANE('',#400278); +#400278 = AXIS2_PLACEMENT_3D('',#400279,#400280,#400281); +#400279 = CARTESIAN_POINT('',(142.15,-76.65,0.)); +#400280 = DIRECTION('',(1.,-0.,0.)); +#400281 = DIRECTION('',(0.,1.,0.)); +#400282 = ADVANCED_FACE('',(#400283),#400293,.F.); +#400283 = FACE_BOUND('',#400284,.F.); +#400284 = EDGE_LOOP('',(#400285,#400286,#400287,#400288,#400289,#400290, + #400291,#400292)); +#400285 = ORIENTED_EDGE('',*,*,#400057,.T.); +#400286 = ORIENTED_EDGE('',*,*,#400089,.T.); +#400287 = ORIENTED_EDGE('',*,*,#400121,.T.); +#400288 = ORIENTED_EDGE('',*,*,#400153,.T.); +#400289 = ORIENTED_EDGE('',*,*,#400185,.T.); +#400290 = ORIENTED_EDGE('',*,*,#400217,.T.); +#400291 = ORIENTED_EDGE('',*,*,#400249,.T.); +#400292 = ORIENTED_EDGE('',*,*,#400272,.T.); +#400293 = PLANE('',#400294); +#400294 = AXIS2_PLACEMENT_3D('',#400295,#400296,#400297); +#400295 = CARTESIAN_POINT('',(0.,0.,0.)); +#400296 = DIRECTION('',(-0.,-0.,-1.)); +#400297 = DIRECTION('',(-1.,0.,0.)); +#400298 = ADVANCED_FACE('',(#400299),#400309,.T.); +#400299 = FACE_BOUND('',#400300,.T.); +#400300 = EDGE_LOOP('',(#400301,#400302,#400303,#400304,#400305,#400306, + #400307,#400308)); +#400301 = ORIENTED_EDGE('',*,*,#400040,.T.); +#400302 = ORIENTED_EDGE('',*,*,#400073,.T.); +#400303 = ORIENTED_EDGE('',*,*,#400104,.T.); +#400304 = ORIENTED_EDGE('',*,*,#400137,.T.); +#400305 = ORIENTED_EDGE('',*,*,#400168,.T.); +#400306 = ORIENTED_EDGE('',*,*,#400201,.T.); +#400307 = ORIENTED_EDGE('',*,*,#400232,.T.); +#400308 = ORIENTED_EDGE('',*,*,#400265,.T.); +#400309 = PLANE('',#400310); +#400310 = AXIS2_PLACEMENT_3D('',#400311,#400312,#400313); +#400311 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#400312 = DIRECTION('',(-0.,-0.,-1.)); +#400313 = DIRECTION('',(-1.,0.,0.)); +#400314 = MANIFOLD_SOLID_BREP('',#400315); +#400315 = CLOSED_SHELL('',(#400316,#400358,#400389,#400422,#400453, + #400486,#400517,#400550,#400572,#400588)); +#400316 = ADVANCED_FACE('',(#400317),#400353,.T.); +#400317 = FACE_BOUND('',#400318,.F.); +#400318 = EDGE_LOOP('',(#400319,#400329,#400338,#400346)); +#400319 = ORIENTED_EDGE('',*,*,#400320,.T.); +#400320 = EDGE_CURVE('',#400321,#400323,#400325,.T.); +#400321 = VERTEX_POINT('',#400322); +#400322 = CARTESIAN_POINT('',(142.15,-76.975,0.)); +#400323 = VERTEX_POINT('',#400324); +#400324 = CARTESIAN_POINT('',(142.15,-76.975,-4.E-02)); +#400325 = LINE('',#400326,#400327); +#400326 = CARTESIAN_POINT('',(142.15,-76.975,0.)); +#400327 = VECTOR('',#400328,1.); +#400328 = DIRECTION('',(0.,0.,-1.)); +#400329 = ORIENTED_EDGE('',*,*,#400330,.T.); +#400330 = EDGE_CURVE('',#400323,#400331,#400333,.T.); +#400331 = VERTEX_POINT('',#400332); +#400332 = CARTESIAN_POINT('',(142.2375,-76.8875,-4.E-02)); +#400333 = CIRCLE('',#400334,8.749946518206E-02); +#400334 = AXIS2_PLACEMENT_3D('',#400335,#400336,#400337); +#400335 = CARTESIAN_POINT('',(142.23749946518,-76.97499946518,-4.E-02)); +#400336 = DIRECTION('',(0.,0.,-1.)); +#400337 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400338 = ORIENTED_EDGE('',*,*,#400339,.F.); +#400339 = EDGE_CURVE('',#400340,#400331,#400342,.T.); +#400340 = VERTEX_POINT('',#400341); +#400341 = CARTESIAN_POINT('',(142.2375,-76.8875,0.)); +#400342 = LINE('',#400343,#400344); +#400343 = CARTESIAN_POINT('',(142.2375,-76.8875,0.)); +#400344 = VECTOR('',#400345,1.); +#400345 = DIRECTION('',(0.,0.,-1.)); +#400346 = ORIENTED_EDGE('',*,*,#400347,.F.); +#400347 = EDGE_CURVE('',#400321,#400340,#400348,.T.); +#400348 = CIRCLE('',#400349,8.749946518206E-02); +#400349 = AXIS2_PLACEMENT_3D('',#400350,#400351,#400352); +#400350 = CARTESIAN_POINT('',(142.23749946518,-76.97499946518,0.)); +#400351 = DIRECTION('',(0.,0.,-1.)); +#400352 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400353 = CYLINDRICAL_SURFACE('',#400354,8.749946518206E-02); +#400354 = AXIS2_PLACEMENT_3D('',#400355,#400356,#400357); +#400355 = CARTESIAN_POINT('',(142.23749946518,-76.97499946518,0.)); +#400356 = DIRECTION('',(-0.,-0.,1.)); +#400357 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400358 = ADVANCED_FACE('',(#400359),#400384,.F.); +#400359 = FACE_BOUND('',#400360,.F.); +#400360 = EDGE_LOOP('',(#400361,#400362,#400370,#400378)); +#400361 = ORIENTED_EDGE('',*,*,#400339,.T.); +#400362 = ORIENTED_EDGE('',*,*,#400363,.T.); +#400363 = EDGE_CURVE('',#400331,#400364,#400366,.T.); +#400364 = VERTEX_POINT('',#400365); +#400365 = CARTESIAN_POINT('',(142.6875,-76.8875,-4.E-02)); +#400366 = LINE('',#400367,#400368); +#400367 = CARTESIAN_POINT('',(142.2375,-76.8875,-4.E-02)); +#400368 = VECTOR('',#400369,1.); +#400369 = DIRECTION('',(1.,0.,0.)); +#400370 = ORIENTED_EDGE('',*,*,#400371,.F.); +#400371 = EDGE_CURVE('',#400372,#400364,#400374,.T.); +#400372 = VERTEX_POINT('',#400373); +#400373 = CARTESIAN_POINT('',(142.6875,-76.8875,0.)); +#400374 = LINE('',#400375,#400376); +#400375 = CARTESIAN_POINT('',(142.6875,-76.8875,0.)); +#400376 = VECTOR('',#400377,1.); +#400377 = DIRECTION('',(0.,0.,-1.)); +#400378 = ORIENTED_EDGE('',*,*,#400379,.F.); +#400379 = EDGE_CURVE('',#400340,#400372,#400380,.T.); +#400380 = LINE('',#400381,#400382); +#400381 = CARTESIAN_POINT('',(142.2375,-76.8875,0.)); +#400382 = VECTOR('',#400383,1.); +#400383 = DIRECTION('',(1.,0.,0.)); +#400384 = PLANE('',#400385); +#400385 = AXIS2_PLACEMENT_3D('',#400386,#400387,#400388); +#400386 = CARTESIAN_POINT('',(142.2375,-76.8875,0.)); +#400387 = DIRECTION('',(0.,-1.,0.)); +#400388 = DIRECTION('',(1.,0.,0.)); +#400389 = ADVANCED_FACE('',(#400390),#400417,.T.); +#400390 = FACE_BOUND('',#400391,.F.); +#400391 = EDGE_LOOP('',(#400392,#400393,#400402,#400410)); +#400392 = ORIENTED_EDGE('',*,*,#400371,.T.); +#400393 = ORIENTED_EDGE('',*,*,#400394,.T.); +#400394 = EDGE_CURVE('',#400364,#400395,#400397,.T.); +#400395 = VERTEX_POINT('',#400396); +#400396 = CARTESIAN_POINT('',(142.775,-76.975,-4.E-02)); +#400397 = CIRCLE('',#400398,8.749946518209E-02); +#400398 = AXIS2_PLACEMENT_3D('',#400399,#400400,#400401); +#400399 = CARTESIAN_POINT('',(142.68750053482,-76.97499946518,-4.E-02)); +#400400 = DIRECTION('',(0.,0.,-1.)); +#400401 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400402 = ORIENTED_EDGE('',*,*,#400403,.F.); +#400403 = EDGE_CURVE('',#400404,#400395,#400406,.T.); +#400404 = VERTEX_POINT('',#400405); +#400405 = CARTESIAN_POINT('',(142.775,-76.975,0.)); +#400406 = LINE('',#400407,#400408); +#400407 = CARTESIAN_POINT('',(142.775,-76.975,0.)); +#400408 = VECTOR('',#400409,1.); +#400409 = DIRECTION('',(0.,0.,-1.)); +#400410 = ORIENTED_EDGE('',*,*,#400411,.F.); +#400411 = EDGE_CURVE('',#400372,#400404,#400412,.T.); +#400412 = CIRCLE('',#400413,8.749946518209E-02); +#400413 = AXIS2_PLACEMENT_3D('',#400414,#400415,#400416); +#400414 = CARTESIAN_POINT('',(142.68750053482,-76.97499946518,0.)); +#400415 = DIRECTION('',(0.,0.,-1.)); +#400416 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400417 = CYLINDRICAL_SURFACE('',#400418,8.749946518209E-02); +#400418 = AXIS2_PLACEMENT_3D('',#400419,#400420,#400421); +#400419 = CARTESIAN_POINT('',(142.68750053482,-76.97499946518,0.)); +#400420 = DIRECTION('',(-0.,-0.,1.)); +#400421 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400422 = ADVANCED_FACE('',(#400423),#400448,.F.); +#400423 = FACE_BOUND('',#400424,.F.); +#400424 = EDGE_LOOP('',(#400425,#400426,#400434,#400442)); +#400425 = ORIENTED_EDGE('',*,*,#400403,.T.); +#400426 = ORIENTED_EDGE('',*,*,#400427,.T.); +#400427 = EDGE_CURVE('',#400395,#400428,#400430,.T.); +#400428 = VERTEX_POINT('',#400429); +#400429 = CARTESIAN_POINT('',(142.775,-77.15,-4.E-02)); +#400430 = LINE('',#400431,#400432); +#400431 = CARTESIAN_POINT('',(142.775,-76.975,-4.E-02)); +#400432 = VECTOR('',#400433,1.); +#400433 = DIRECTION('',(0.,-1.,0.)); +#400434 = ORIENTED_EDGE('',*,*,#400435,.F.); +#400435 = EDGE_CURVE('',#400436,#400428,#400438,.T.); +#400436 = VERTEX_POINT('',#400437); +#400437 = CARTESIAN_POINT('',(142.775,-77.15,0.)); +#400438 = LINE('',#400439,#400440); +#400439 = CARTESIAN_POINT('',(142.775,-77.15,0.)); +#400440 = VECTOR('',#400441,1.); +#400441 = DIRECTION('',(0.,0.,-1.)); +#400442 = ORIENTED_EDGE('',*,*,#400443,.F.); +#400443 = EDGE_CURVE('',#400404,#400436,#400444,.T.); +#400444 = LINE('',#400445,#400446); +#400445 = CARTESIAN_POINT('',(142.775,-76.975,0.)); +#400446 = VECTOR('',#400447,1.); +#400447 = DIRECTION('',(0.,-1.,0.)); +#400448 = PLANE('',#400449); +#400449 = AXIS2_PLACEMENT_3D('',#400450,#400451,#400452); +#400450 = CARTESIAN_POINT('',(142.775,-76.975,0.)); +#400451 = DIRECTION('',(-1.,-0.,-0.)); +#400452 = DIRECTION('',(0.,-1.,0.)); +#400453 = ADVANCED_FACE('',(#400454),#400481,.T.); +#400454 = FACE_BOUND('',#400455,.F.); +#400455 = EDGE_LOOP('',(#400456,#400457,#400466,#400474)); +#400456 = ORIENTED_EDGE('',*,*,#400435,.T.); +#400457 = ORIENTED_EDGE('',*,*,#400458,.T.); +#400458 = EDGE_CURVE('',#400428,#400459,#400461,.T.); +#400459 = VERTEX_POINT('',#400460); +#400460 = CARTESIAN_POINT('',(142.6875,-77.2375,-4.E-02)); +#400461 = CIRCLE('',#400462,8.749946518209E-02); +#400462 = AXIS2_PLACEMENT_3D('',#400463,#400464,#400465); +#400463 = CARTESIAN_POINT('',(142.68750053482,-77.15000053482,-4.E-02)); +#400464 = DIRECTION('',(0.,0.,-1.)); +#400465 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400466 = ORIENTED_EDGE('',*,*,#400467,.F.); +#400467 = EDGE_CURVE('',#400468,#400459,#400470,.T.); +#400468 = VERTEX_POINT('',#400469); +#400469 = CARTESIAN_POINT('',(142.6875,-77.2375,0.)); +#400470 = LINE('',#400471,#400472); +#400471 = CARTESIAN_POINT('',(142.6875,-77.2375,0.)); +#400472 = VECTOR('',#400473,1.); +#400473 = DIRECTION('',(0.,0.,-1.)); +#400474 = ORIENTED_EDGE('',*,*,#400475,.F.); +#400475 = EDGE_CURVE('',#400436,#400468,#400476,.T.); +#400476 = CIRCLE('',#400477,8.749946518209E-02); +#400477 = AXIS2_PLACEMENT_3D('',#400478,#400479,#400480); +#400478 = CARTESIAN_POINT('',(142.68750053482,-77.15000053482,0.)); +#400479 = DIRECTION('',(0.,0.,-1.)); +#400480 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400481 = CYLINDRICAL_SURFACE('',#400482,8.749946518209E-02); +#400482 = AXIS2_PLACEMENT_3D('',#400483,#400484,#400485); +#400483 = CARTESIAN_POINT('',(142.68750053482,-77.15000053482,0.)); +#400484 = DIRECTION('',(-0.,-0.,1.)); +#400485 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400486 = ADVANCED_FACE('',(#400487),#400512,.F.); +#400487 = FACE_BOUND('',#400488,.F.); +#400488 = EDGE_LOOP('',(#400489,#400490,#400498,#400506)); +#400489 = ORIENTED_EDGE('',*,*,#400467,.T.); +#400490 = ORIENTED_EDGE('',*,*,#400491,.T.); +#400491 = EDGE_CURVE('',#400459,#400492,#400494,.T.); +#400492 = VERTEX_POINT('',#400493); +#400493 = CARTESIAN_POINT('',(142.2375,-77.2375,-4.E-02)); +#400494 = LINE('',#400495,#400496); +#400495 = CARTESIAN_POINT('',(142.6875,-77.2375,-4.E-02)); +#400496 = VECTOR('',#400497,1.); +#400497 = DIRECTION('',(-1.,0.,0.)); +#400498 = ORIENTED_EDGE('',*,*,#400499,.F.); +#400499 = EDGE_CURVE('',#400500,#400492,#400502,.T.); +#400500 = VERTEX_POINT('',#400501); +#400501 = CARTESIAN_POINT('',(142.2375,-77.2375,0.)); +#400502 = LINE('',#400503,#400504); +#400503 = CARTESIAN_POINT('',(142.2375,-77.2375,0.)); +#400504 = VECTOR('',#400505,1.); +#400505 = DIRECTION('',(0.,0.,-1.)); +#400506 = ORIENTED_EDGE('',*,*,#400507,.F.); +#400507 = EDGE_CURVE('',#400468,#400500,#400508,.T.); +#400508 = LINE('',#400509,#400510); +#400509 = CARTESIAN_POINT('',(142.6875,-77.2375,0.)); +#400510 = VECTOR('',#400511,1.); +#400511 = DIRECTION('',(-1.,0.,0.)); +#400512 = PLANE('',#400513); +#400513 = AXIS2_PLACEMENT_3D('',#400514,#400515,#400516); +#400514 = CARTESIAN_POINT('',(142.6875,-77.2375,0.)); +#400515 = DIRECTION('',(0.,1.,0.)); +#400516 = DIRECTION('',(-1.,0.,0.)); +#400517 = ADVANCED_FACE('',(#400518),#400545,.T.); +#400518 = FACE_BOUND('',#400519,.F.); +#400519 = EDGE_LOOP('',(#400520,#400521,#400530,#400538)); +#400520 = ORIENTED_EDGE('',*,*,#400499,.T.); +#400521 = ORIENTED_EDGE('',*,*,#400522,.T.); +#400522 = EDGE_CURVE('',#400492,#400523,#400525,.T.); +#400523 = VERTEX_POINT('',#400524); +#400524 = CARTESIAN_POINT('',(142.15,-77.15,-4.E-02)); +#400525 = CIRCLE('',#400526,8.749946518206E-02); +#400526 = AXIS2_PLACEMENT_3D('',#400527,#400528,#400529); +#400527 = CARTESIAN_POINT('',(142.23749946518,-77.15000053482,-4.E-02)); +#400528 = DIRECTION('',(0.,0.,-1.)); +#400529 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400530 = ORIENTED_EDGE('',*,*,#400531,.F.); +#400531 = EDGE_CURVE('',#400532,#400523,#400534,.T.); +#400532 = VERTEX_POINT('',#400533); +#400533 = CARTESIAN_POINT('',(142.15,-77.15,0.)); +#400534 = LINE('',#400535,#400536); +#400535 = CARTESIAN_POINT('',(142.15,-77.15,0.)); +#400536 = VECTOR('',#400537,1.); +#400537 = DIRECTION('',(0.,0.,-1.)); +#400538 = ORIENTED_EDGE('',*,*,#400539,.F.); +#400539 = EDGE_CURVE('',#400500,#400532,#400540,.T.); +#400540 = CIRCLE('',#400541,8.749946518206E-02); +#400541 = AXIS2_PLACEMENT_3D('',#400542,#400543,#400544); +#400542 = CARTESIAN_POINT('',(142.23749946518,-77.15000053482,0.)); +#400543 = DIRECTION('',(0.,0.,-1.)); +#400544 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400545 = CYLINDRICAL_SURFACE('',#400546,8.749946518206E-02); +#400546 = AXIS2_PLACEMENT_3D('',#400547,#400548,#400549); +#400547 = CARTESIAN_POINT('',(142.23749946518,-77.15000053482,0.)); +#400548 = DIRECTION('',(-0.,-0.,1.)); +#400549 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400550 = ADVANCED_FACE('',(#400551),#400567,.F.); +#400551 = FACE_BOUND('',#400552,.F.); +#400552 = EDGE_LOOP('',(#400553,#400554,#400560,#400561)); +#400553 = ORIENTED_EDGE('',*,*,#400531,.T.); +#400554 = ORIENTED_EDGE('',*,*,#400555,.T.); +#400555 = EDGE_CURVE('',#400523,#400323,#400556,.T.); +#400556 = LINE('',#400557,#400558); +#400557 = CARTESIAN_POINT('',(142.15,-77.15,-4.E-02)); +#400558 = VECTOR('',#400559,1.); +#400559 = DIRECTION('',(0.,1.,0.)); +#400560 = ORIENTED_EDGE('',*,*,#400320,.F.); +#400561 = ORIENTED_EDGE('',*,*,#400562,.F.); +#400562 = EDGE_CURVE('',#400532,#400321,#400563,.T.); +#400563 = LINE('',#400564,#400565); +#400564 = CARTESIAN_POINT('',(142.15,-77.15,0.)); +#400565 = VECTOR('',#400566,1.); +#400566 = DIRECTION('',(0.,1.,0.)); +#400567 = PLANE('',#400568); +#400568 = AXIS2_PLACEMENT_3D('',#400569,#400570,#400571); +#400569 = CARTESIAN_POINT('',(142.15,-77.15,0.)); +#400570 = DIRECTION('',(1.,-0.,0.)); +#400571 = DIRECTION('',(0.,1.,0.)); +#400572 = ADVANCED_FACE('',(#400573),#400583,.F.); +#400573 = FACE_BOUND('',#400574,.F.); +#400574 = EDGE_LOOP('',(#400575,#400576,#400577,#400578,#400579,#400580, + #400581,#400582)); +#400575 = ORIENTED_EDGE('',*,*,#400347,.T.); +#400576 = ORIENTED_EDGE('',*,*,#400379,.T.); +#400577 = ORIENTED_EDGE('',*,*,#400411,.T.); +#400578 = ORIENTED_EDGE('',*,*,#400443,.T.); +#400579 = ORIENTED_EDGE('',*,*,#400475,.T.); +#400580 = ORIENTED_EDGE('',*,*,#400507,.T.); +#400581 = ORIENTED_EDGE('',*,*,#400539,.T.); +#400582 = ORIENTED_EDGE('',*,*,#400562,.T.); +#400583 = PLANE('',#400584); +#400584 = AXIS2_PLACEMENT_3D('',#400585,#400586,#400587); +#400585 = CARTESIAN_POINT('',(0.,0.,0.)); +#400586 = DIRECTION('',(-0.,-0.,-1.)); +#400587 = DIRECTION('',(-1.,0.,0.)); +#400588 = ADVANCED_FACE('',(#400589),#400599,.T.); +#400589 = FACE_BOUND('',#400590,.T.); +#400590 = EDGE_LOOP('',(#400591,#400592,#400593,#400594,#400595,#400596, + #400597,#400598)); +#400591 = ORIENTED_EDGE('',*,*,#400330,.T.); +#400592 = ORIENTED_EDGE('',*,*,#400363,.T.); +#400593 = ORIENTED_EDGE('',*,*,#400394,.T.); +#400594 = ORIENTED_EDGE('',*,*,#400427,.T.); +#400595 = ORIENTED_EDGE('',*,*,#400458,.T.); +#400596 = ORIENTED_EDGE('',*,*,#400491,.T.); +#400597 = ORIENTED_EDGE('',*,*,#400522,.T.); +#400598 = ORIENTED_EDGE('',*,*,#400555,.T.); +#400599 = PLANE('',#400600); +#400600 = AXIS2_PLACEMENT_3D('',#400601,#400602,#400603); +#400601 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#400602 = DIRECTION('',(-0.,-0.,-1.)); +#400603 = DIRECTION('',(-1.,0.,0.)); +#400604 = MANIFOLD_SOLID_BREP('',#400605); +#400605 = CLOSED_SHELL('',(#400606,#400648,#400679,#400712,#400743, + #400776,#400807,#400840,#400862,#400878)); +#400606 = ADVANCED_FACE('',(#400607),#400643,.T.); +#400607 = FACE_BOUND('',#400608,.F.); +#400608 = EDGE_LOOP('',(#400609,#400619,#400628,#400636)); +#400609 = ORIENTED_EDGE('',*,*,#400610,.T.); +#400610 = EDGE_CURVE('',#400611,#400613,#400615,.T.); +#400611 = VERTEX_POINT('',#400612); +#400612 = CARTESIAN_POINT('',(142.15,-77.475,0.)); +#400613 = VERTEX_POINT('',#400614); +#400614 = CARTESIAN_POINT('',(142.15,-77.475,-4.E-02)); +#400615 = LINE('',#400616,#400617); +#400616 = CARTESIAN_POINT('',(142.15,-77.475,0.)); +#400617 = VECTOR('',#400618,1.); +#400618 = DIRECTION('',(0.,0.,-1.)); +#400619 = ORIENTED_EDGE('',*,*,#400620,.T.); +#400620 = EDGE_CURVE('',#400613,#400621,#400623,.T.); +#400621 = VERTEX_POINT('',#400622); +#400622 = CARTESIAN_POINT('',(142.2375,-77.3875,-4.E-02)); +#400623 = CIRCLE('',#400624,8.749946518206E-02); +#400624 = AXIS2_PLACEMENT_3D('',#400625,#400626,#400627); +#400625 = CARTESIAN_POINT('',(142.23749946518,-77.47499946518,-4.E-02)); +#400626 = DIRECTION('',(0.,0.,-1.)); +#400627 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400628 = ORIENTED_EDGE('',*,*,#400629,.F.); +#400629 = EDGE_CURVE('',#400630,#400621,#400632,.T.); +#400630 = VERTEX_POINT('',#400631); +#400631 = CARTESIAN_POINT('',(142.2375,-77.3875,0.)); +#400632 = LINE('',#400633,#400634); +#400633 = CARTESIAN_POINT('',(142.2375,-77.3875,0.)); +#400634 = VECTOR('',#400635,1.); +#400635 = DIRECTION('',(0.,0.,-1.)); +#400636 = ORIENTED_EDGE('',*,*,#400637,.F.); +#400637 = EDGE_CURVE('',#400611,#400630,#400638,.T.); +#400638 = CIRCLE('',#400639,8.749946518206E-02); +#400639 = AXIS2_PLACEMENT_3D('',#400640,#400641,#400642); +#400640 = CARTESIAN_POINT('',(142.23749946518,-77.47499946518,0.)); +#400641 = DIRECTION('',(0.,0.,-1.)); +#400642 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400643 = CYLINDRICAL_SURFACE('',#400644,8.749946518206E-02); +#400644 = AXIS2_PLACEMENT_3D('',#400645,#400646,#400647); +#400645 = CARTESIAN_POINT('',(142.23749946518,-77.47499946518,0.)); +#400646 = DIRECTION('',(-0.,-0.,1.)); +#400647 = DIRECTION('',(-0.999999999981,-6.112261097328E-06,-0.)); +#400648 = ADVANCED_FACE('',(#400649),#400674,.F.); +#400649 = FACE_BOUND('',#400650,.F.); +#400650 = EDGE_LOOP('',(#400651,#400652,#400660,#400668)); +#400651 = ORIENTED_EDGE('',*,*,#400629,.T.); +#400652 = ORIENTED_EDGE('',*,*,#400653,.T.); +#400653 = EDGE_CURVE('',#400621,#400654,#400656,.T.); +#400654 = VERTEX_POINT('',#400655); +#400655 = CARTESIAN_POINT('',(142.6875,-77.3875,-4.E-02)); +#400656 = LINE('',#400657,#400658); +#400657 = CARTESIAN_POINT('',(142.2375,-77.3875,-4.E-02)); +#400658 = VECTOR('',#400659,1.); +#400659 = DIRECTION('',(1.,0.,0.)); +#400660 = ORIENTED_EDGE('',*,*,#400661,.F.); +#400661 = EDGE_CURVE('',#400662,#400654,#400664,.T.); +#400662 = VERTEX_POINT('',#400663); +#400663 = CARTESIAN_POINT('',(142.6875,-77.3875,0.)); +#400664 = LINE('',#400665,#400666); +#400665 = CARTESIAN_POINT('',(142.6875,-77.3875,0.)); +#400666 = VECTOR('',#400667,1.); +#400667 = DIRECTION('',(0.,0.,-1.)); +#400668 = ORIENTED_EDGE('',*,*,#400669,.F.); +#400669 = EDGE_CURVE('',#400630,#400662,#400670,.T.); +#400670 = LINE('',#400671,#400672); +#400671 = CARTESIAN_POINT('',(142.2375,-77.3875,0.)); +#400672 = VECTOR('',#400673,1.); +#400673 = DIRECTION('',(1.,0.,0.)); +#400674 = PLANE('',#400675); +#400675 = AXIS2_PLACEMENT_3D('',#400676,#400677,#400678); +#400676 = CARTESIAN_POINT('',(142.2375,-77.3875,0.)); +#400677 = DIRECTION('',(0.,-1.,0.)); +#400678 = DIRECTION('',(1.,0.,0.)); +#400679 = ADVANCED_FACE('',(#400680),#400707,.T.); +#400680 = FACE_BOUND('',#400681,.F.); +#400681 = EDGE_LOOP('',(#400682,#400683,#400692,#400700)); +#400682 = ORIENTED_EDGE('',*,*,#400661,.T.); +#400683 = ORIENTED_EDGE('',*,*,#400684,.T.); +#400684 = EDGE_CURVE('',#400654,#400685,#400687,.T.); +#400685 = VERTEX_POINT('',#400686); +#400686 = CARTESIAN_POINT('',(142.775,-77.475,-4.E-02)); +#400687 = CIRCLE('',#400688,8.749946518209E-02); +#400688 = AXIS2_PLACEMENT_3D('',#400689,#400690,#400691); +#400689 = CARTESIAN_POINT('',(142.68750053482,-77.47499946518,-4.E-02)); +#400690 = DIRECTION('',(0.,0.,-1.)); +#400691 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400692 = ORIENTED_EDGE('',*,*,#400693,.F.); +#400693 = EDGE_CURVE('',#400694,#400685,#400696,.T.); +#400694 = VERTEX_POINT('',#400695); +#400695 = CARTESIAN_POINT('',(142.775,-77.475,0.)); +#400696 = LINE('',#400697,#400698); +#400697 = CARTESIAN_POINT('',(142.775,-77.475,0.)); +#400698 = VECTOR('',#400699,1.); +#400699 = DIRECTION('',(0.,0.,-1.)); +#400700 = ORIENTED_EDGE('',*,*,#400701,.F.); +#400701 = EDGE_CURVE('',#400662,#400694,#400702,.T.); +#400702 = CIRCLE('',#400703,8.749946518209E-02); +#400703 = AXIS2_PLACEMENT_3D('',#400704,#400705,#400706); +#400704 = CARTESIAN_POINT('',(142.68750053482,-77.47499946518,0.)); +#400705 = DIRECTION('',(0.,0.,-1.)); +#400706 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400707 = CYLINDRICAL_SURFACE('',#400708,8.749946518209E-02); +#400708 = AXIS2_PLACEMENT_3D('',#400709,#400710,#400711); +#400709 = CARTESIAN_POINT('',(142.68750053482,-77.47499946518,0.)); +#400710 = DIRECTION('',(-0.,-0.,1.)); +#400711 = DIRECTION('',(-6.112260772505E-06,0.999999999981,0.)); +#400712 = ADVANCED_FACE('',(#400713),#400738,.F.); +#400713 = FACE_BOUND('',#400714,.F.); +#400714 = EDGE_LOOP('',(#400715,#400716,#400724,#400732)); +#400715 = ORIENTED_EDGE('',*,*,#400693,.T.); +#400716 = ORIENTED_EDGE('',*,*,#400717,.T.); +#400717 = EDGE_CURVE('',#400685,#400718,#400720,.T.); +#400718 = VERTEX_POINT('',#400719); +#400719 = CARTESIAN_POINT('',(142.775,-77.65,-4.E-02)); +#400720 = LINE('',#400721,#400722); +#400721 = CARTESIAN_POINT('',(142.775,-77.475,-4.E-02)); +#400722 = VECTOR('',#400723,1.); +#400723 = DIRECTION('',(0.,-1.,0.)); +#400724 = ORIENTED_EDGE('',*,*,#400725,.F.); +#400725 = EDGE_CURVE('',#400726,#400718,#400728,.T.); +#400726 = VERTEX_POINT('',#400727); +#400727 = CARTESIAN_POINT('',(142.775,-77.65,0.)); +#400728 = LINE('',#400729,#400730); +#400729 = CARTESIAN_POINT('',(142.775,-77.65,0.)); +#400730 = VECTOR('',#400731,1.); +#400731 = DIRECTION('',(0.,0.,-1.)); +#400732 = ORIENTED_EDGE('',*,*,#400733,.F.); +#400733 = EDGE_CURVE('',#400694,#400726,#400734,.T.); +#400734 = LINE('',#400735,#400736); +#400735 = CARTESIAN_POINT('',(142.775,-77.475,0.)); +#400736 = VECTOR('',#400737,1.); +#400737 = DIRECTION('',(0.,-1.,0.)); +#400738 = PLANE('',#400739); +#400739 = AXIS2_PLACEMENT_3D('',#400740,#400741,#400742); +#400740 = CARTESIAN_POINT('',(142.775,-77.475,0.)); +#400741 = DIRECTION('',(-1.,-0.,-0.)); +#400742 = DIRECTION('',(0.,-1.,0.)); +#400743 = ADVANCED_FACE('',(#400744),#400771,.T.); +#400744 = FACE_BOUND('',#400745,.F.); +#400745 = EDGE_LOOP('',(#400746,#400747,#400756,#400764)); +#400746 = ORIENTED_EDGE('',*,*,#400725,.T.); +#400747 = ORIENTED_EDGE('',*,*,#400748,.T.); +#400748 = EDGE_CURVE('',#400718,#400749,#400751,.T.); +#400749 = VERTEX_POINT('',#400750); +#400750 = CARTESIAN_POINT('',(142.6875,-77.7375,-4.E-02)); +#400751 = CIRCLE('',#400752,8.749946518209E-02); +#400752 = AXIS2_PLACEMENT_3D('',#400753,#400754,#400755); +#400753 = CARTESIAN_POINT('',(142.68750053482,-77.65000053482,-4.E-02)); +#400754 = DIRECTION('',(0.,0.,-1.)); +#400755 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400756 = ORIENTED_EDGE('',*,*,#400757,.F.); +#400757 = EDGE_CURVE('',#400758,#400749,#400760,.T.); +#400758 = VERTEX_POINT('',#400759); +#400759 = CARTESIAN_POINT('',(142.6875,-77.7375,0.)); +#400760 = LINE('',#400761,#400762); +#400761 = CARTESIAN_POINT('',(142.6875,-77.7375,0.)); +#400762 = VECTOR('',#400763,1.); +#400763 = DIRECTION('',(0.,0.,-1.)); +#400764 = ORIENTED_EDGE('',*,*,#400765,.F.); +#400765 = EDGE_CURVE('',#400726,#400758,#400766,.T.); +#400766 = CIRCLE('',#400767,8.749946518209E-02); +#400767 = AXIS2_PLACEMENT_3D('',#400768,#400769,#400770); +#400768 = CARTESIAN_POINT('',(142.68750053482,-77.65000053482,0.)); +#400769 = DIRECTION('',(0.,0.,-1.)); +#400770 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400771 = CYLINDRICAL_SURFACE('',#400772,8.749946518209E-02); +#400772 = AXIS2_PLACEMENT_3D('',#400773,#400774,#400775); +#400773 = CARTESIAN_POINT('',(142.68750053482,-77.65000053482,0.)); +#400774 = DIRECTION('',(-0.,-0.,1.)); +#400775 = DIRECTION('',(0.999999999981,6.112260610094E-06,0.)); +#400776 = ADVANCED_FACE('',(#400777),#400802,.F.); +#400777 = FACE_BOUND('',#400778,.F.); +#400778 = EDGE_LOOP('',(#400779,#400780,#400788,#400796)); +#400779 = ORIENTED_EDGE('',*,*,#400757,.T.); +#400780 = ORIENTED_EDGE('',*,*,#400781,.T.); +#400781 = EDGE_CURVE('',#400749,#400782,#400784,.T.); +#400782 = VERTEX_POINT('',#400783); +#400783 = CARTESIAN_POINT('',(142.2375,-77.7375,-4.E-02)); +#400784 = LINE('',#400785,#400786); +#400785 = CARTESIAN_POINT('',(142.6875,-77.7375,-4.E-02)); +#400786 = VECTOR('',#400787,1.); +#400787 = DIRECTION('',(-1.,0.,0.)); +#400788 = ORIENTED_EDGE('',*,*,#400789,.F.); +#400789 = EDGE_CURVE('',#400790,#400782,#400792,.T.); +#400790 = VERTEX_POINT('',#400791); +#400791 = CARTESIAN_POINT('',(142.2375,-77.7375,0.)); +#400792 = LINE('',#400793,#400794); +#400793 = CARTESIAN_POINT('',(142.2375,-77.7375,0.)); +#400794 = VECTOR('',#400795,1.); +#400795 = DIRECTION('',(0.,0.,-1.)); +#400796 = ORIENTED_EDGE('',*,*,#400797,.F.); +#400797 = EDGE_CURVE('',#400758,#400790,#400798,.T.); +#400798 = LINE('',#400799,#400800); +#400799 = CARTESIAN_POINT('',(142.6875,-77.7375,0.)); +#400800 = VECTOR('',#400801,1.); +#400801 = DIRECTION('',(-1.,0.,0.)); +#400802 = PLANE('',#400803); +#400803 = AXIS2_PLACEMENT_3D('',#400804,#400805,#400806); +#400804 = CARTESIAN_POINT('',(142.6875,-77.7375,0.)); +#400805 = DIRECTION('',(0.,1.,0.)); +#400806 = DIRECTION('',(-1.,0.,0.)); +#400807 = ADVANCED_FACE('',(#400808),#400835,.T.); +#400808 = FACE_BOUND('',#400809,.F.); +#400809 = EDGE_LOOP('',(#400810,#400811,#400820,#400828)); +#400810 = ORIENTED_EDGE('',*,*,#400789,.T.); +#400811 = ORIENTED_EDGE('',*,*,#400812,.T.); +#400812 = EDGE_CURVE('',#400782,#400813,#400815,.T.); +#400813 = VERTEX_POINT('',#400814); +#400814 = CARTESIAN_POINT('',(142.15,-77.65,-4.E-02)); +#400815 = CIRCLE('',#400816,8.749946518206E-02); +#400816 = AXIS2_PLACEMENT_3D('',#400817,#400818,#400819); +#400817 = CARTESIAN_POINT('',(142.23749946518,-77.65000053482,-4.E-02)); +#400818 = DIRECTION('',(0.,0.,-1.)); +#400819 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400820 = ORIENTED_EDGE('',*,*,#400821,.F.); +#400821 = EDGE_CURVE('',#400822,#400813,#400824,.T.); +#400822 = VERTEX_POINT('',#400823); +#400823 = CARTESIAN_POINT('',(142.15,-77.65,0.)); +#400824 = LINE('',#400825,#400826); +#400825 = CARTESIAN_POINT('',(142.15,-77.65,0.)); +#400826 = VECTOR('',#400827,1.); +#400827 = DIRECTION('',(0.,0.,-1.)); +#400828 = ORIENTED_EDGE('',*,*,#400829,.F.); +#400829 = EDGE_CURVE('',#400790,#400822,#400830,.T.); +#400830 = CIRCLE('',#400831,8.749946518206E-02); +#400831 = AXIS2_PLACEMENT_3D('',#400832,#400833,#400834); +#400832 = CARTESIAN_POINT('',(142.23749946518,-77.65000053482,0.)); +#400833 = DIRECTION('',(0.,0.,-1.)); +#400834 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400835 = CYLINDRICAL_SURFACE('',#400836,8.749946518206E-02); +#400836 = AXIS2_PLACEMENT_3D('',#400837,#400838,#400839); +#400837 = CARTESIAN_POINT('',(142.23749946518,-77.65000053482,0.)); +#400838 = DIRECTION('',(-0.,-0.,1.)); +#400839 = DIRECTION('',(6.112261097329E-06,-0.999999999981,0.)); +#400840 = ADVANCED_FACE('',(#400841),#400857,.F.); +#400841 = FACE_BOUND('',#400842,.F.); +#400842 = EDGE_LOOP('',(#400843,#400844,#400850,#400851)); +#400843 = ORIENTED_EDGE('',*,*,#400821,.T.); +#400844 = ORIENTED_EDGE('',*,*,#400845,.T.); +#400845 = EDGE_CURVE('',#400813,#400613,#400846,.T.); +#400846 = LINE('',#400847,#400848); +#400847 = CARTESIAN_POINT('',(142.15,-77.65,-4.E-02)); +#400848 = VECTOR('',#400849,1.); +#400849 = DIRECTION('',(0.,1.,0.)); +#400850 = ORIENTED_EDGE('',*,*,#400610,.F.); +#400851 = ORIENTED_EDGE('',*,*,#400852,.F.); +#400852 = EDGE_CURVE('',#400822,#400611,#400853,.T.); +#400853 = LINE('',#400854,#400855); +#400854 = CARTESIAN_POINT('',(142.15,-77.65,0.)); +#400855 = VECTOR('',#400856,1.); +#400856 = DIRECTION('',(0.,1.,0.)); +#400857 = PLANE('',#400858); +#400858 = AXIS2_PLACEMENT_3D('',#400859,#400860,#400861); +#400859 = CARTESIAN_POINT('',(142.15,-77.65,0.)); +#400860 = DIRECTION('',(1.,-0.,0.)); +#400861 = DIRECTION('',(0.,1.,0.)); +#400862 = ADVANCED_FACE('',(#400863),#400873,.F.); +#400863 = FACE_BOUND('',#400864,.F.); +#400864 = EDGE_LOOP('',(#400865,#400866,#400867,#400868,#400869,#400870, + #400871,#400872)); +#400865 = ORIENTED_EDGE('',*,*,#400637,.T.); +#400866 = ORIENTED_EDGE('',*,*,#400669,.T.); +#400867 = ORIENTED_EDGE('',*,*,#400701,.T.); +#400868 = ORIENTED_EDGE('',*,*,#400733,.T.); +#400869 = ORIENTED_EDGE('',*,*,#400765,.T.); +#400870 = ORIENTED_EDGE('',*,*,#400797,.T.); +#400871 = ORIENTED_EDGE('',*,*,#400829,.T.); +#400872 = ORIENTED_EDGE('',*,*,#400852,.T.); +#400873 = PLANE('',#400874); +#400874 = AXIS2_PLACEMENT_3D('',#400875,#400876,#400877); +#400875 = CARTESIAN_POINT('',(0.,0.,0.)); +#400876 = DIRECTION('',(-0.,-0.,-1.)); +#400877 = DIRECTION('',(-1.,0.,0.)); +#400878 = ADVANCED_FACE('',(#400879),#400889,.T.); +#400879 = FACE_BOUND('',#400880,.T.); +#400880 = EDGE_LOOP('',(#400881,#400882,#400883,#400884,#400885,#400886, + #400887,#400888)); +#400881 = ORIENTED_EDGE('',*,*,#400620,.T.); +#400882 = ORIENTED_EDGE('',*,*,#400653,.T.); +#400883 = ORIENTED_EDGE('',*,*,#400684,.T.); +#400884 = ORIENTED_EDGE('',*,*,#400717,.T.); +#400885 = ORIENTED_EDGE('',*,*,#400748,.T.); +#400886 = ORIENTED_EDGE('',*,*,#400781,.T.); +#400887 = ORIENTED_EDGE('',*,*,#400812,.T.); +#400888 = ORIENTED_EDGE('',*,*,#400845,.T.); +#400889 = PLANE('',#400890); +#400890 = AXIS2_PLACEMENT_3D('',#400891,#400892,#400893); +#400891 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#400892 = DIRECTION('',(-0.,-0.,-1.)); +#400893 = DIRECTION('',(-1.,0.,0.)); +#400894 = MANIFOLD_SOLID_BREP('',#400895); +#400895 = CLOSED_SHELL('',(#400896,#400938,#400969,#401002,#401033, + #401066,#401097,#401130,#401152,#401168)); +#400896 = ADVANCED_FACE('',(#400897),#400933,.T.); +#400897 = FACE_BOUND('',#400898,.F.); +#400898 = EDGE_LOOP('',(#400899,#400909,#400918,#400926)); +#400899 = ORIENTED_EDGE('',*,*,#400900,.T.); +#400900 = EDGE_CURVE('',#400901,#400903,#400905,.T.); +#400901 = VERTEX_POINT('',#400902); +#400902 = CARTESIAN_POINT('',(141.125,-78.,0.)); +#400903 = VERTEX_POINT('',#400904); +#400904 = CARTESIAN_POINT('',(141.125,-78.,-4.E-02)); +#400905 = LINE('',#400906,#400907); +#400906 = CARTESIAN_POINT('',(141.125,-78.,0.)); +#400907 = VECTOR('',#400908,1.); +#400908 = DIRECTION('',(0.,0.,-1.)); +#400909 = ORIENTED_EDGE('',*,*,#400910,.T.); +#400910 = EDGE_CURVE('',#400903,#400911,#400913,.T.); +#400911 = VERTEX_POINT('',#400912); +#400912 = CARTESIAN_POINT('',(141.2125,-77.9125,-4.E-02)); +#400913 = CIRCLE('',#400914,8.749946518212E-02); +#400914 = AXIS2_PLACEMENT_3D('',#400915,#400916,#400917); +#400915 = CARTESIAN_POINT('',(141.21249946518,-77.99999946518,-4.E-02)); +#400916 = DIRECTION('',(0.,0.,-1.)); +#400917 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#400918 = ORIENTED_EDGE('',*,*,#400919,.F.); +#400919 = EDGE_CURVE('',#400920,#400911,#400922,.T.); +#400920 = VERTEX_POINT('',#400921); +#400921 = CARTESIAN_POINT('',(141.2125,-77.9125,0.)); +#400922 = LINE('',#400923,#400924); +#400923 = CARTESIAN_POINT('',(141.2125,-77.9125,0.)); +#400924 = VECTOR('',#400925,1.); +#400925 = DIRECTION('',(0.,0.,-1.)); +#400926 = ORIENTED_EDGE('',*,*,#400927,.F.); +#400927 = EDGE_CURVE('',#400901,#400920,#400928,.T.); +#400928 = CIRCLE('',#400929,8.749946518212E-02); +#400929 = AXIS2_PLACEMENT_3D('',#400930,#400931,#400932); +#400930 = CARTESIAN_POINT('',(141.21249946518,-77.99999946518,0.)); +#400931 = DIRECTION('',(0.,0.,-1.)); +#400932 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#400933 = CYLINDRICAL_SURFACE('',#400934,8.749946518212E-02); +#400934 = AXIS2_PLACEMENT_3D('',#400935,#400936,#400937); +#400935 = CARTESIAN_POINT('',(141.21249946518,-77.99999946518,0.)); +#400936 = DIRECTION('',(-0.,-0.,1.)); +#400937 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#400938 = ADVANCED_FACE('',(#400939),#400964,.F.); +#400939 = FACE_BOUND('',#400940,.F.); +#400940 = EDGE_LOOP('',(#400941,#400942,#400950,#400958)); +#400941 = ORIENTED_EDGE('',*,*,#400919,.T.); +#400942 = ORIENTED_EDGE('',*,*,#400943,.T.); +#400943 = EDGE_CURVE('',#400911,#400944,#400946,.T.); +#400944 = VERTEX_POINT('',#400945); +#400945 = CARTESIAN_POINT('',(141.3875,-77.9125,-4.E-02)); +#400946 = LINE('',#400947,#400948); +#400947 = CARTESIAN_POINT('',(141.2125,-77.9125,-4.E-02)); +#400948 = VECTOR('',#400949,1.); +#400949 = DIRECTION('',(1.,0.,0.)); +#400950 = ORIENTED_EDGE('',*,*,#400951,.F.); +#400951 = EDGE_CURVE('',#400952,#400944,#400954,.T.); +#400952 = VERTEX_POINT('',#400953); +#400953 = CARTESIAN_POINT('',(141.3875,-77.9125,0.)); +#400954 = LINE('',#400955,#400956); +#400955 = CARTESIAN_POINT('',(141.3875,-77.9125,0.)); +#400956 = VECTOR('',#400957,1.); +#400957 = DIRECTION('',(0.,0.,-1.)); +#400958 = ORIENTED_EDGE('',*,*,#400959,.F.); +#400959 = EDGE_CURVE('',#400920,#400952,#400960,.T.); +#400960 = LINE('',#400961,#400962); +#400961 = CARTESIAN_POINT('',(141.2125,-77.9125,0.)); +#400962 = VECTOR('',#400963,1.); +#400963 = DIRECTION('',(1.,0.,0.)); +#400964 = PLANE('',#400965); +#400965 = AXIS2_PLACEMENT_3D('',#400966,#400967,#400968); +#400966 = CARTESIAN_POINT('',(141.2125,-77.9125,0.)); +#400967 = DIRECTION('',(0.,-1.,0.)); +#400968 = DIRECTION('',(1.,0.,0.)); +#400969 = ADVANCED_FACE('',(#400970),#400997,.T.); +#400970 = FACE_BOUND('',#400971,.F.); +#400971 = EDGE_LOOP('',(#400972,#400973,#400982,#400990)); +#400972 = ORIENTED_EDGE('',*,*,#400951,.T.); +#400973 = ORIENTED_EDGE('',*,*,#400974,.T.); +#400974 = EDGE_CURVE('',#400944,#400975,#400977,.T.); +#400975 = VERTEX_POINT('',#400976); +#400976 = CARTESIAN_POINT('',(141.475,-78.,-4.E-02)); +#400977 = CIRCLE('',#400978,8.749946518209E-02); +#400978 = AXIS2_PLACEMENT_3D('',#400979,#400980,#400981); +#400979 = CARTESIAN_POINT('',(141.38750053482,-77.99999946518,-4.E-02)); +#400980 = DIRECTION('',(0.,0.,-1.)); +#400981 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#400982 = ORIENTED_EDGE('',*,*,#400983,.F.); +#400983 = EDGE_CURVE('',#400984,#400975,#400986,.T.); +#400984 = VERTEX_POINT('',#400985); +#400985 = CARTESIAN_POINT('',(141.475,-78.,0.)); +#400986 = LINE('',#400987,#400988); +#400987 = CARTESIAN_POINT('',(141.475,-78.,0.)); +#400988 = VECTOR('',#400989,1.); +#400989 = DIRECTION('',(0.,0.,-1.)); +#400990 = ORIENTED_EDGE('',*,*,#400991,.F.); +#400991 = EDGE_CURVE('',#400952,#400984,#400992,.T.); +#400992 = CIRCLE('',#400993,8.749946518209E-02); +#400993 = AXIS2_PLACEMENT_3D('',#400994,#400995,#400996); +#400994 = CARTESIAN_POINT('',(141.38750053482,-77.99999946518,0.)); +#400995 = DIRECTION('',(0.,0.,-1.)); +#400996 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#400997 = CYLINDRICAL_SURFACE('',#400998,8.749946518209E-02); +#400998 = AXIS2_PLACEMENT_3D('',#400999,#401000,#401001); +#400999 = CARTESIAN_POINT('',(141.38750053482,-77.99999946518,0.)); +#401000 = DIRECTION('',(-0.,-0.,1.)); +#401001 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#401002 = ADVANCED_FACE('',(#401003),#401028,.F.); +#401003 = FACE_BOUND('',#401004,.F.); +#401004 = EDGE_LOOP('',(#401005,#401006,#401014,#401022)); +#401005 = ORIENTED_EDGE('',*,*,#400983,.T.); +#401006 = ORIENTED_EDGE('',*,*,#401007,.T.); +#401007 = EDGE_CURVE('',#400975,#401008,#401010,.T.); +#401008 = VERTEX_POINT('',#401009); +#401009 = CARTESIAN_POINT('',(141.475,-78.45,-4.E-02)); +#401010 = LINE('',#401011,#401012); +#401011 = CARTESIAN_POINT('',(141.475,-78.,-4.E-02)); +#401012 = VECTOR('',#401013,1.); +#401013 = DIRECTION('',(0.,-1.,0.)); +#401014 = ORIENTED_EDGE('',*,*,#401015,.F.); +#401015 = EDGE_CURVE('',#401016,#401008,#401018,.T.); +#401016 = VERTEX_POINT('',#401017); +#401017 = CARTESIAN_POINT('',(141.475,-78.45,0.)); +#401018 = LINE('',#401019,#401020); +#401019 = CARTESIAN_POINT('',(141.475,-78.45,0.)); +#401020 = VECTOR('',#401021,1.); +#401021 = DIRECTION('',(0.,0.,-1.)); +#401022 = ORIENTED_EDGE('',*,*,#401023,.F.); +#401023 = EDGE_CURVE('',#400984,#401016,#401024,.T.); +#401024 = LINE('',#401025,#401026); +#401025 = CARTESIAN_POINT('',(141.475,-78.,0.)); +#401026 = VECTOR('',#401027,1.); +#401027 = DIRECTION('',(0.,-1.,0.)); +#401028 = PLANE('',#401029); +#401029 = AXIS2_PLACEMENT_3D('',#401030,#401031,#401032); +#401030 = CARTESIAN_POINT('',(141.475,-78.,0.)); +#401031 = DIRECTION('',(-1.,-0.,-0.)); +#401032 = DIRECTION('',(0.,-1.,0.)); +#401033 = ADVANCED_FACE('',(#401034),#401061,.T.); +#401034 = FACE_BOUND('',#401035,.F.); +#401035 = EDGE_LOOP('',(#401036,#401037,#401046,#401054)); +#401036 = ORIENTED_EDGE('',*,*,#401015,.T.); +#401037 = ORIENTED_EDGE('',*,*,#401038,.T.); +#401038 = EDGE_CURVE('',#401008,#401039,#401041,.T.); +#401039 = VERTEX_POINT('',#401040); +#401040 = CARTESIAN_POINT('',(141.3875,-78.5375,-4.E-02)); +#401041 = CIRCLE('',#401042,8.749946518206E-02); +#401042 = AXIS2_PLACEMENT_3D('',#401043,#401044,#401045); +#401043 = CARTESIAN_POINT('',(141.38750053482,-78.45000053482,-4.E-02)); +#401044 = DIRECTION('',(0.,0.,-1.)); +#401045 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401046 = ORIENTED_EDGE('',*,*,#401047,.F.); +#401047 = EDGE_CURVE('',#401048,#401039,#401050,.T.); +#401048 = VERTEX_POINT('',#401049); +#401049 = CARTESIAN_POINT('',(141.3875,-78.5375,0.)); +#401050 = LINE('',#401051,#401052); +#401051 = CARTESIAN_POINT('',(141.3875,-78.5375,0.)); +#401052 = VECTOR('',#401053,1.); +#401053 = DIRECTION('',(0.,0.,-1.)); +#401054 = ORIENTED_EDGE('',*,*,#401055,.F.); +#401055 = EDGE_CURVE('',#401016,#401048,#401056,.T.); +#401056 = CIRCLE('',#401057,8.749946518206E-02); +#401057 = AXIS2_PLACEMENT_3D('',#401058,#401059,#401060); +#401058 = CARTESIAN_POINT('',(141.38750053482,-78.45000053482,0.)); +#401059 = DIRECTION('',(0.,0.,-1.)); +#401060 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401061 = CYLINDRICAL_SURFACE('',#401062,8.749946518206E-02); +#401062 = AXIS2_PLACEMENT_3D('',#401063,#401064,#401065); +#401063 = CARTESIAN_POINT('',(141.38750053482,-78.45000053482,0.)); +#401064 = DIRECTION('',(-0.,-0.,1.)); +#401065 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401066 = ADVANCED_FACE('',(#401067),#401092,.F.); +#401067 = FACE_BOUND('',#401068,.F.); +#401068 = EDGE_LOOP('',(#401069,#401070,#401078,#401086)); +#401069 = ORIENTED_EDGE('',*,*,#401047,.T.); +#401070 = ORIENTED_EDGE('',*,*,#401071,.T.); +#401071 = EDGE_CURVE('',#401039,#401072,#401074,.T.); +#401072 = VERTEX_POINT('',#401073); +#401073 = CARTESIAN_POINT('',(141.2125,-78.5375,-4.E-02)); +#401074 = LINE('',#401075,#401076); +#401075 = CARTESIAN_POINT('',(141.3875,-78.5375,-4.E-02)); +#401076 = VECTOR('',#401077,1.); +#401077 = DIRECTION('',(-1.,0.,0.)); +#401078 = ORIENTED_EDGE('',*,*,#401079,.F.); +#401079 = EDGE_CURVE('',#401080,#401072,#401082,.T.); +#401080 = VERTEX_POINT('',#401081); +#401081 = CARTESIAN_POINT('',(141.2125,-78.5375,0.)); +#401082 = LINE('',#401083,#401084); +#401083 = CARTESIAN_POINT('',(141.2125,-78.5375,0.)); +#401084 = VECTOR('',#401085,1.); +#401085 = DIRECTION('',(0.,0.,-1.)); +#401086 = ORIENTED_EDGE('',*,*,#401087,.F.); +#401087 = EDGE_CURVE('',#401048,#401080,#401088,.T.); +#401088 = LINE('',#401089,#401090); +#401089 = CARTESIAN_POINT('',(141.3875,-78.5375,0.)); +#401090 = VECTOR('',#401091,1.); +#401091 = DIRECTION('',(-1.,0.,0.)); +#401092 = PLANE('',#401093); +#401093 = AXIS2_PLACEMENT_3D('',#401094,#401095,#401096); +#401094 = CARTESIAN_POINT('',(141.3875,-78.5375,0.)); +#401095 = DIRECTION('',(0.,1.,0.)); +#401096 = DIRECTION('',(-1.,0.,0.)); +#401097 = ADVANCED_FACE('',(#401098),#401125,.T.); +#401098 = FACE_BOUND('',#401099,.F.); +#401099 = EDGE_LOOP('',(#401100,#401101,#401110,#401118)); +#401100 = ORIENTED_EDGE('',*,*,#401079,.T.); +#401101 = ORIENTED_EDGE('',*,*,#401102,.T.); +#401102 = EDGE_CURVE('',#401072,#401103,#401105,.T.); +#401103 = VERTEX_POINT('',#401104); +#401104 = CARTESIAN_POINT('',(141.125,-78.45,-4.E-02)); +#401105 = CIRCLE('',#401106,8.74994651821E-02); +#401106 = AXIS2_PLACEMENT_3D('',#401107,#401108,#401109); +#401107 = CARTESIAN_POINT('',(141.21249946518,-78.45000053482,-4.E-02)); +#401108 = DIRECTION('',(0.,0.,-1.)); +#401109 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401110 = ORIENTED_EDGE('',*,*,#401111,.F.); +#401111 = EDGE_CURVE('',#401112,#401103,#401114,.T.); +#401112 = VERTEX_POINT('',#401113); +#401113 = CARTESIAN_POINT('',(141.125,-78.45,0.)); +#401114 = LINE('',#401115,#401116); +#401115 = CARTESIAN_POINT('',(141.125,-78.45,0.)); +#401116 = VECTOR('',#401117,1.); +#401117 = DIRECTION('',(0.,0.,-1.)); +#401118 = ORIENTED_EDGE('',*,*,#401119,.F.); +#401119 = EDGE_CURVE('',#401080,#401112,#401120,.T.); +#401120 = CIRCLE('',#401121,8.74994651821E-02); +#401121 = AXIS2_PLACEMENT_3D('',#401122,#401123,#401124); +#401122 = CARTESIAN_POINT('',(141.21249946518,-78.45000053482,0.)); +#401123 = DIRECTION('',(0.,0.,-1.)); +#401124 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401125 = CYLINDRICAL_SURFACE('',#401126,8.74994651821E-02); +#401126 = AXIS2_PLACEMENT_3D('',#401127,#401128,#401129); +#401127 = CARTESIAN_POINT('',(141.21249946518,-78.45000053482,0.)); +#401128 = DIRECTION('',(-0.,-0.,1.)); +#401129 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401130 = ADVANCED_FACE('',(#401131),#401147,.F.); +#401131 = FACE_BOUND('',#401132,.F.); +#401132 = EDGE_LOOP('',(#401133,#401134,#401140,#401141)); +#401133 = ORIENTED_EDGE('',*,*,#401111,.T.); +#401134 = ORIENTED_EDGE('',*,*,#401135,.T.); +#401135 = EDGE_CURVE('',#401103,#400903,#401136,.T.); +#401136 = LINE('',#401137,#401138); +#401137 = CARTESIAN_POINT('',(141.125,-78.45,-4.E-02)); +#401138 = VECTOR('',#401139,1.); +#401139 = DIRECTION('',(0.,1.,0.)); +#401140 = ORIENTED_EDGE('',*,*,#400900,.F.); +#401141 = ORIENTED_EDGE('',*,*,#401142,.F.); +#401142 = EDGE_CURVE('',#401112,#400901,#401143,.T.); +#401143 = LINE('',#401144,#401145); +#401144 = CARTESIAN_POINT('',(141.125,-78.45,0.)); +#401145 = VECTOR('',#401146,1.); +#401146 = DIRECTION('',(0.,1.,0.)); +#401147 = PLANE('',#401148); +#401148 = AXIS2_PLACEMENT_3D('',#401149,#401150,#401151); +#401149 = CARTESIAN_POINT('',(141.125,-78.45,0.)); +#401150 = DIRECTION('',(1.,-0.,0.)); +#401151 = DIRECTION('',(0.,1.,0.)); +#401152 = ADVANCED_FACE('',(#401153),#401163,.F.); +#401153 = FACE_BOUND('',#401154,.F.); +#401154 = EDGE_LOOP('',(#401155,#401156,#401157,#401158,#401159,#401160, + #401161,#401162)); +#401155 = ORIENTED_EDGE('',*,*,#400927,.T.); +#401156 = ORIENTED_EDGE('',*,*,#400959,.T.); +#401157 = ORIENTED_EDGE('',*,*,#400991,.T.); +#401158 = ORIENTED_EDGE('',*,*,#401023,.T.); +#401159 = ORIENTED_EDGE('',*,*,#401055,.T.); +#401160 = ORIENTED_EDGE('',*,*,#401087,.T.); +#401161 = ORIENTED_EDGE('',*,*,#401119,.T.); +#401162 = ORIENTED_EDGE('',*,*,#401142,.T.); +#401163 = PLANE('',#401164); +#401164 = AXIS2_PLACEMENT_3D('',#401165,#401166,#401167); +#401165 = CARTESIAN_POINT('',(0.,0.,0.)); +#401166 = DIRECTION('',(-0.,-0.,-1.)); +#401167 = DIRECTION('',(-1.,0.,0.)); +#401168 = ADVANCED_FACE('',(#401169),#401179,.T.); +#401169 = FACE_BOUND('',#401170,.T.); +#401170 = EDGE_LOOP('',(#401171,#401172,#401173,#401174,#401175,#401176, + #401177,#401178)); +#401171 = ORIENTED_EDGE('',*,*,#400910,.T.); +#401172 = ORIENTED_EDGE('',*,*,#400943,.T.); +#401173 = ORIENTED_EDGE('',*,*,#400974,.T.); +#401174 = ORIENTED_EDGE('',*,*,#401007,.T.); +#401175 = ORIENTED_EDGE('',*,*,#401038,.T.); +#401176 = ORIENTED_EDGE('',*,*,#401071,.T.); +#401177 = ORIENTED_EDGE('',*,*,#401102,.T.); +#401178 = ORIENTED_EDGE('',*,*,#401135,.T.); +#401179 = PLANE('',#401180); +#401180 = AXIS2_PLACEMENT_3D('',#401181,#401182,#401183); +#401181 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#401182 = DIRECTION('',(-0.,-0.,-1.)); +#401183 = DIRECTION('',(-1.,0.,0.)); +#401184 = MANIFOLD_SOLID_BREP('',#401185); +#401185 = CLOSED_SHELL('',(#401186,#401228,#401259,#401292,#401323, + #401356,#401387,#401420,#401442,#401458)); +#401186 = ADVANCED_FACE('',(#401187),#401223,.T.); +#401187 = FACE_BOUND('',#401188,.F.); +#401188 = EDGE_LOOP('',(#401189,#401199,#401208,#401216)); +#401189 = ORIENTED_EDGE('',*,*,#401190,.T.); +#401190 = EDGE_CURVE('',#401191,#401193,#401195,.T.); +#401191 = VERTEX_POINT('',#401192); +#401192 = CARTESIAN_POINT('',(140.625,-78.,0.)); +#401193 = VERTEX_POINT('',#401194); +#401194 = CARTESIAN_POINT('',(140.625,-78.,-4.E-02)); +#401195 = LINE('',#401196,#401197); +#401196 = CARTESIAN_POINT('',(140.625,-78.,0.)); +#401197 = VECTOR('',#401198,1.); +#401198 = DIRECTION('',(0.,0.,-1.)); +#401199 = ORIENTED_EDGE('',*,*,#401200,.T.); +#401200 = EDGE_CURVE('',#401193,#401201,#401203,.T.); +#401201 = VERTEX_POINT('',#401202); +#401202 = CARTESIAN_POINT('',(140.7125,-77.9125,-4.E-02)); +#401203 = CIRCLE('',#401204,8.749946518212E-02); +#401204 = AXIS2_PLACEMENT_3D('',#401205,#401206,#401207); +#401205 = CARTESIAN_POINT('',(140.71249946518,-77.99999946518,-4.E-02)); +#401206 = DIRECTION('',(0.,0.,-1.)); +#401207 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#401208 = ORIENTED_EDGE('',*,*,#401209,.F.); +#401209 = EDGE_CURVE('',#401210,#401201,#401212,.T.); +#401210 = VERTEX_POINT('',#401211); +#401211 = CARTESIAN_POINT('',(140.7125,-77.9125,0.)); +#401212 = LINE('',#401213,#401214); +#401213 = CARTESIAN_POINT('',(140.7125,-77.9125,0.)); +#401214 = VECTOR('',#401215,1.); +#401215 = DIRECTION('',(0.,0.,-1.)); +#401216 = ORIENTED_EDGE('',*,*,#401217,.F.); +#401217 = EDGE_CURVE('',#401191,#401210,#401218,.T.); +#401218 = CIRCLE('',#401219,8.749946518212E-02); +#401219 = AXIS2_PLACEMENT_3D('',#401220,#401221,#401222); +#401220 = CARTESIAN_POINT('',(140.71249946518,-77.99999946518,0.)); +#401221 = DIRECTION('',(0.,0.,-1.)); +#401222 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#401223 = CYLINDRICAL_SURFACE('',#401224,8.749946518212E-02); +#401224 = AXIS2_PLACEMENT_3D('',#401225,#401226,#401227); +#401225 = CARTESIAN_POINT('',(140.71249946518,-77.99999946518,0.)); +#401226 = DIRECTION('',(-0.,-0.,1.)); +#401227 = DIRECTION('',(-0.999999999981,-6.112260447681E-06,-0.)); +#401228 = ADVANCED_FACE('',(#401229),#401254,.F.); +#401229 = FACE_BOUND('',#401230,.F.); +#401230 = EDGE_LOOP('',(#401231,#401232,#401240,#401248)); +#401231 = ORIENTED_EDGE('',*,*,#401209,.T.); +#401232 = ORIENTED_EDGE('',*,*,#401233,.T.); +#401233 = EDGE_CURVE('',#401201,#401234,#401236,.T.); +#401234 = VERTEX_POINT('',#401235); +#401235 = CARTESIAN_POINT('',(140.8875,-77.9125,-4.E-02)); +#401236 = LINE('',#401237,#401238); +#401237 = CARTESIAN_POINT('',(140.7125,-77.9125,-4.E-02)); +#401238 = VECTOR('',#401239,1.); +#401239 = DIRECTION('',(1.,0.,0.)); +#401240 = ORIENTED_EDGE('',*,*,#401241,.F.); +#401241 = EDGE_CURVE('',#401242,#401234,#401244,.T.); +#401242 = VERTEX_POINT('',#401243); +#401243 = CARTESIAN_POINT('',(140.8875,-77.9125,0.)); +#401244 = LINE('',#401245,#401246); +#401245 = CARTESIAN_POINT('',(140.8875,-77.9125,0.)); +#401246 = VECTOR('',#401247,1.); +#401247 = DIRECTION('',(0.,0.,-1.)); +#401248 = ORIENTED_EDGE('',*,*,#401249,.F.); +#401249 = EDGE_CURVE('',#401210,#401242,#401250,.T.); +#401250 = LINE('',#401251,#401252); +#401251 = CARTESIAN_POINT('',(140.7125,-77.9125,0.)); +#401252 = VECTOR('',#401253,1.); +#401253 = DIRECTION('',(1.,0.,0.)); +#401254 = PLANE('',#401255); +#401255 = AXIS2_PLACEMENT_3D('',#401256,#401257,#401258); +#401256 = CARTESIAN_POINT('',(140.7125,-77.9125,0.)); +#401257 = DIRECTION('',(0.,-1.,0.)); +#401258 = DIRECTION('',(1.,0.,0.)); +#401259 = ADVANCED_FACE('',(#401260),#401287,.T.); +#401260 = FACE_BOUND('',#401261,.F.); +#401261 = EDGE_LOOP('',(#401262,#401263,#401272,#401280)); +#401262 = ORIENTED_EDGE('',*,*,#401241,.T.); +#401263 = ORIENTED_EDGE('',*,*,#401264,.T.); +#401264 = EDGE_CURVE('',#401234,#401265,#401267,.T.); +#401265 = VERTEX_POINT('',#401266); +#401266 = CARTESIAN_POINT('',(140.975,-78.,-4.E-02)); +#401267 = CIRCLE('',#401268,8.749946518209E-02); +#401268 = AXIS2_PLACEMENT_3D('',#401269,#401270,#401271); +#401269 = CARTESIAN_POINT('',(140.88750053482,-77.99999946518,-4.E-02)); +#401270 = DIRECTION('',(0.,0.,-1.)); +#401271 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#401272 = ORIENTED_EDGE('',*,*,#401273,.F.); +#401273 = EDGE_CURVE('',#401274,#401265,#401276,.T.); +#401274 = VERTEX_POINT('',#401275); +#401275 = CARTESIAN_POINT('',(140.975,-78.,0.)); +#401276 = LINE('',#401277,#401278); +#401277 = CARTESIAN_POINT('',(140.975,-78.,0.)); +#401278 = VECTOR('',#401279,1.); +#401279 = DIRECTION('',(0.,0.,-1.)); +#401280 = ORIENTED_EDGE('',*,*,#401281,.F.); +#401281 = EDGE_CURVE('',#401242,#401274,#401282,.T.); +#401282 = CIRCLE('',#401283,8.749946518209E-02); +#401283 = AXIS2_PLACEMENT_3D('',#401284,#401285,#401286); +#401284 = CARTESIAN_POINT('',(140.88750053482,-77.99999946518,0.)); +#401285 = DIRECTION('',(0.,0.,-1.)); +#401286 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#401287 = CYLINDRICAL_SURFACE('',#401288,8.749946518209E-02); +#401288 = AXIS2_PLACEMENT_3D('',#401289,#401290,#401291); +#401289 = CARTESIAN_POINT('',(140.88750053482,-77.99999946518,0.)); +#401290 = DIRECTION('',(-0.,-0.,1.)); +#401291 = DIRECTION('',(-6.112260772506E-06,0.999999999981,0.)); +#401292 = ADVANCED_FACE('',(#401293),#401318,.F.); +#401293 = FACE_BOUND('',#401294,.F.); +#401294 = EDGE_LOOP('',(#401295,#401296,#401304,#401312)); +#401295 = ORIENTED_EDGE('',*,*,#401273,.T.); +#401296 = ORIENTED_EDGE('',*,*,#401297,.T.); +#401297 = EDGE_CURVE('',#401265,#401298,#401300,.T.); +#401298 = VERTEX_POINT('',#401299); +#401299 = CARTESIAN_POINT('',(140.975,-78.45,-4.E-02)); +#401300 = LINE('',#401301,#401302); +#401301 = CARTESIAN_POINT('',(140.975,-78.,-4.E-02)); +#401302 = VECTOR('',#401303,1.); +#401303 = DIRECTION('',(0.,-1.,0.)); +#401304 = ORIENTED_EDGE('',*,*,#401305,.F.); +#401305 = EDGE_CURVE('',#401306,#401298,#401308,.T.); +#401306 = VERTEX_POINT('',#401307); +#401307 = CARTESIAN_POINT('',(140.975,-78.45,0.)); +#401308 = LINE('',#401309,#401310); +#401309 = CARTESIAN_POINT('',(140.975,-78.45,0.)); +#401310 = VECTOR('',#401311,1.); +#401311 = DIRECTION('',(0.,0.,-1.)); +#401312 = ORIENTED_EDGE('',*,*,#401313,.F.); +#401313 = EDGE_CURVE('',#401274,#401306,#401314,.T.); +#401314 = LINE('',#401315,#401316); +#401315 = CARTESIAN_POINT('',(140.975,-78.,0.)); +#401316 = VECTOR('',#401317,1.); +#401317 = DIRECTION('',(0.,-1.,0.)); +#401318 = PLANE('',#401319); +#401319 = AXIS2_PLACEMENT_3D('',#401320,#401321,#401322); +#401320 = CARTESIAN_POINT('',(140.975,-78.,0.)); +#401321 = DIRECTION('',(-1.,-0.,-0.)); +#401322 = DIRECTION('',(0.,-1.,0.)); +#401323 = ADVANCED_FACE('',(#401324),#401351,.T.); +#401324 = FACE_BOUND('',#401325,.F.); +#401325 = EDGE_LOOP('',(#401326,#401327,#401336,#401344)); +#401326 = ORIENTED_EDGE('',*,*,#401305,.T.); +#401327 = ORIENTED_EDGE('',*,*,#401328,.T.); +#401328 = EDGE_CURVE('',#401298,#401329,#401331,.T.); +#401329 = VERTEX_POINT('',#401330); +#401330 = CARTESIAN_POINT('',(140.8875,-78.5375,-4.E-02)); +#401331 = CIRCLE('',#401332,8.749946518206E-02); +#401332 = AXIS2_PLACEMENT_3D('',#401333,#401334,#401335); +#401333 = CARTESIAN_POINT('',(140.88750053482,-78.45000053482,-4.E-02)); +#401334 = DIRECTION('',(0.,0.,-1.)); +#401335 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401336 = ORIENTED_EDGE('',*,*,#401337,.F.); +#401337 = EDGE_CURVE('',#401338,#401329,#401340,.T.); +#401338 = VERTEX_POINT('',#401339); +#401339 = CARTESIAN_POINT('',(140.8875,-78.5375,0.)); +#401340 = LINE('',#401341,#401342); +#401341 = CARTESIAN_POINT('',(140.8875,-78.5375,0.)); +#401342 = VECTOR('',#401343,1.); +#401343 = DIRECTION('',(0.,0.,-1.)); +#401344 = ORIENTED_EDGE('',*,*,#401345,.F.); +#401345 = EDGE_CURVE('',#401306,#401338,#401346,.T.); +#401346 = CIRCLE('',#401347,8.749946518206E-02); +#401347 = AXIS2_PLACEMENT_3D('',#401348,#401349,#401350); +#401348 = CARTESIAN_POINT('',(140.88750053482,-78.45000053482,0.)); +#401349 = DIRECTION('',(0.,0.,-1.)); +#401350 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401351 = CYLINDRICAL_SURFACE('',#401352,8.749946518206E-02); +#401352 = AXIS2_PLACEMENT_3D('',#401353,#401354,#401355); +#401353 = CARTESIAN_POINT('',(140.88750053482,-78.45000053482,0.)); +#401354 = DIRECTION('',(-0.,-0.,1.)); +#401355 = DIRECTION('',(0.999999999981,6.112261097328E-06,0.)); +#401356 = ADVANCED_FACE('',(#401357),#401382,.F.); +#401357 = FACE_BOUND('',#401358,.F.); +#401358 = EDGE_LOOP('',(#401359,#401360,#401368,#401376)); +#401359 = ORIENTED_EDGE('',*,*,#401337,.T.); +#401360 = ORIENTED_EDGE('',*,*,#401361,.T.); +#401361 = EDGE_CURVE('',#401329,#401362,#401364,.T.); +#401362 = VERTEX_POINT('',#401363); +#401363 = CARTESIAN_POINT('',(140.7125,-78.5375,-4.E-02)); +#401364 = LINE('',#401365,#401366); +#401365 = CARTESIAN_POINT('',(140.8875,-78.5375,-4.E-02)); +#401366 = VECTOR('',#401367,1.); +#401367 = DIRECTION('',(-1.,0.,0.)); +#401368 = ORIENTED_EDGE('',*,*,#401369,.F.); +#401369 = EDGE_CURVE('',#401370,#401362,#401372,.T.); +#401370 = VERTEX_POINT('',#401371); +#401371 = CARTESIAN_POINT('',(140.7125,-78.5375,0.)); +#401372 = LINE('',#401373,#401374); +#401373 = CARTESIAN_POINT('',(140.7125,-78.5375,0.)); +#401374 = VECTOR('',#401375,1.); +#401375 = DIRECTION('',(0.,0.,-1.)); +#401376 = ORIENTED_EDGE('',*,*,#401377,.F.); +#401377 = EDGE_CURVE('',#401338,#401370,#401378,.T.); +#401378 = LINE('',#401379,#401380); +#401379 = CARTESIAN_POINT('',(140.8875,-78.5375,0.)); +#401380 = VECTOR('',#401381,1.); +#401381 = DIRECTION('',(-1.,0.,0.)); +#401382 = PLANE('',#401383); +#401383 = AXIS2_PLACEMENT_3D('',#401384,#401385,#401386); +#401384 = CARTESIAN_POINT('',(140.8875,-78.5375,0.)); +#401385 = DIRECTION('',(0.,1.,0.)); +#401386 = DIRECTION('',(-1.,0.,0.)); +#401387 = ADVANCED_FACE('',(#401388),#401415,.T.); +#401388 = FACE_BOUND('',#401389,.F.); +#401389 = EDGE_LOOP('',(#401390,#401391,#401400,#401408)); +#401390 = ORIENTED_EDGE('',*,*,#401369,.T.); +#401391 = ORIENTED_EDGE('',*,*,#401392,.T.); +#401392 = EDGE_CURVE('',#401362,#401393,#401395,.T.); +#401393 = VERTEX_POINT('',#401394); +#401394 = CARTESIAN_POINT('',(140.625,-78.45,-4.E-02)); +#401395 = CIRCLE('',#401396,8.74994651821E-02); +#401396 = AXIS2_PLACEMENT_3D('',#401397,#401398,#401399); +#401397 = CARTESIAN_POINT('',(140.71249946518,-78.45000053482,-4.E-02)); +#401398 = DIRECTION('',(0.,0.,-1.)); +#401399 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401400 = ORIENTED_EDGE('',*,*,#401401,.F.); +#401401 = EDGE_CURVE('',#401402,#401393,#401404,.T.); +#401402 = VERTEX_POINT('',#401403); +#401403 = CARTESIAN_POINT('',(140.625,-78.45,0.)); +#401404 = LINE('',#401405,#401406); +#401405 = CARTESIAN_POINT('',(140.625,-78.45,0.)); +#401406 = VECTOR('',#401407,1.); +#401407 = DIRECTION('',(0.,0.,-1.)); +#401408 = ORIENTED_EDGE('',*,*,#401409,.F.); +#401409 = EDGE_CURVE('',#401370,#401402,#401410,.T.); +#401410 = CIRCLE('',#401411,8.74994651821E-02); +#401411 = AXIS2_PLACEMENT_3D('',#401412,#401413,#401414); +#401412 = CARTESIAN_POINT('',(140.71249946518,-78.45000053482,0.)); +#401413 = DIRECTION('',(0.,0.,-1.)); +#401414 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401415 = CYLINDRICAL_SURFACE('',#401416,8.74994651821E-02); +#401416 = AXIS2_PLACEMENT_3D('',#401417,#401418,#401419); +#401417 = CARTESIAN_POINT('',(140.71249946518,-78.45000053482,0.)); +#401418 = DIRECTION('',(-0.,-0.,1.)); +#401419 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401420 = ADVANCED_FACE('',(#401421),#401437,.F.); +#401421 = FACE_BOUND('',#401422,.F.); +#401422 = EDGE_LOOP('',(#401423,#401424,#401430,#401431)); +#401423 = ORIENTED_EDGE('',*,*,#401401,.T.); +#401424 = ORIENTED_EDGE('',*,*,#401425,.T.); +#401425 = EDGE_CURVE('',#401393,#401193,#401426,.T.); +#401426 = LINE('',#401427,#401428); +#401427 = CARTESIAN_POINT('',(140.625,-78.45,-4.E-02)); +#401428 = VECTOR('',#401429,1.); +#401429 = DIRECTION('',(0.,1.,0.)); +#401430 = ORIENTED_EDGE('',*,*,#401190,.F.); +#401431 = ORIENTED_EDGE('',*,*,#401432,.F.); +#401432 = EDGE_CURVE('',#401402,#401191,#401433,.T.); +#401433 = LINE('',#401434,#401435); +#401434 = CARTESIAN_POINT('',(140.625,-78.45,0.)); +#401435 = VECTOR('',#401436,1.); +#401436 = DIRECTION('',(0.,1.,0.)); +#401437 = PLANE('',#401438); +#401438 = AXIS2_PLACEMENT_3D('',#401439,#401440,#401441); +#401439 = CARTESIAN_POINT('',(140.625,-78.45,0.)); +#401440 = DIRECTION('',(1.,-0.,0.)); +#401441 = DIRECTION('',(0.,1.,0.)); +#401442 = ADVANCED_FACE('',(#401443),#401453,.F.); +#401443 = FACE_BOUND('',#401444,.F.); +#401444 = EDGE_LOOP('',(#401445,#401446,#401447,#401448,#401449,#401450, + #401451,#401452)); +#401445 = ORIENTED_EDGE('',*,*,#401217,.T.); +#401446 = ORIENTED_EDGE('',*,*,#401249,.T.); +#401447 = ORIENTED_EDGE('',*,*,#401281,.T.); +#401448 = ORIENTED_EDGE('',*,*,#401313,.T.); +#401449 = ORIENTED_EDGE('',*,*,#401345,.T.); +#401450 = ORIENTED_EDGE('',*,*,#401377,.T.); +#401451 = ORIENTED_EDGE('',*,*,#401409,.T.); +#401452 = ORIENTED_EDGE('',*,*,#401432,.T.); +#401453 = PLANE('',#401454); +#401454 = AXIS2_PLACEMENT_3D('',#401455,#401456,#401457); +#401455 = CARTESIAN_POINT('',(0.,0.,0.)); +#401456 = DIRECTION('',(-0.,-0.,-1.)); +#401457 = DIRECTION('',(-1.,0.,0.)); +#401458 = ADVANCED_FACE('',(#401459),#401469,.T.); +#401459 = FACE_BOUND('',#401460,.T.); +#401460 = EDGE_LOOP('',(#401461,#401462,#401463,#401464,#401465,#401466, + #401467,#401468)); +#401461 = ORIENTED_EDGE('',*,*,#401200,.T.); +#401462 = ORIENTED_EDGE('',*,*,#401233,.T.); +#401463 = ORIENTED_EDGE('',*,*,#401264,.T.); +#401464 = ORIENTED_EDGE('',*,*,#401297,.T.); +#401465 = ORIENTED_EDGE('',*,*,#401328,.T.); +#401466 = ORIENTED_EDGE('',*,*,#401361,.T.); +#401467 = ORIENTED_EDGE('',*,*,#401392,.T.); +#401468 = ORIENTED_EDGE('',*,*,#401425,.T.); +#401469 = PLANE('',#401470); +#401470 = AXIS2_PLACEMENT_3D('',#401471,#401472,#401473); +#401471 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#401472 = DIRECTION('',(-0.,-0.,-1.)); +#401473 = DIRECTION('',(-1.,0.,0.)); +#401474 = MANIFOLD_SOLID_BREP('',#401475); +#401475 = CLOSED_SHELL('',(#401476,#401518,#401549,#401582,#401613, + #401646,#401677,#401710,#401732,#401748)); +#401476 = ADVANCED_FACE('',(#401477),#401513,.T.); +#401477 = FACE_BOUND('',#401478,.F.); +#401478 = EDGE_LOOP('',(#401479,#401489,#401498,#401506)); +#401479 = ORIENTED_EDGE('',*,*,#401480,.T.); +#401480 = EDGE_CURVE('',#401481,#401483,#401485,.T.); +#401481 = VERTEX_POINT('',#401482); +#401482 = CARTESIAN_POINT('',(139.825,-76.975,0.)); +#401483 = VERTEX_POINT('',#401484); +#401484 = CARTESIAN_POINT('',(139.825,-76.975,-4.E-02)); +#401485 = LINE('',#401486,#401487); +#401486 = CARTESIAN_POINT('',(139.825,-76.975,0.)); +#401487 = VECTOR('',#401488,1.); +#401488 = DIRECTION('',(0.,0.,-1.)); +#401489 = ORIENTED_EDGE('',*,*,#401490,.T.); +#401490 = EDGE_CURVE('',#401483,#401491,#401493,.T.); +#401491 = VERTEX_POINT('',#401492); +#401492 = CARTESIAN_POINT('',(139.9125,-76.8875,-4.E-02)); +#401493 = CIRCLE('',#401494,8.74994651821E-02); +#401494 = AXIS2_PLACEMENT_3D('',#401495,#401496,#401497); +#401495 = CARTESIAN_POINT('',(139.91249946518,-76.97499946518,-4.E-02)); +#401496 = DIRECTION('',(0.,0.,-1.)); +#401497 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401498 = ORIENTED_EDGE('',*,*,#401499,.F.); +#401499 = EDGE_CURVE('',#401500,#401491,#401502,.T.); +#401500 = VERTEX_POINT('',#401501); +#401501 = CARTESIAN_POINT('',(139.9125,-76.8875,0.)); +#401502 = LINE('',#401503,#401504); +#401503 = CARTESIAN_POINT('',(139.9125,-76.8875,0.)); +#401504 = VECTOR('',#401505,1.); +#401505 = DIRECTION('',(0.,0.,-1.)); +#401506 = ORIENTED_EDGE('',*,*,#401507,.F.); +#401507 = EDGE_CURVE('',#401481,#401500,#401508,.T.); +#401508 = CIRCLE('',#401509,8.74994651821E-02); +#401509 = AXIS2_PLACEMENT_3D('',#401510,#401511,#401512); +#401510 = CARTESIAN_POINT('',(139.91249946518,-76.97499946518,0.)); +#401511 = DIRECTION('',(0.,0.,-1.)); +#401512 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401513 = CYLINDRICAL_SURFACE('',#401514,8.74994651821E-02); +#401514 = AXIS2_PLACEMENT_3D('',#401515,#401516,#401517); +#401515 = CARTESIAN_POINT('',(139.91249946518,-76.97499946518,0.)); +#401516 = DIRECTION('',(-0.,-0.,1.)); +#401517 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401518 = ADVANCED_FACE('',(#401519),#401544,.F.); +#401519 = FACE_BOUND('',#401520,.F.); +#401520 = EDGE_LOOP('',(#401521,#401522,#401530,#401538)); +#401521 = ORIENTED_EDGE('',*,*,#401499,.T.); +#401522 = ORIENTED_EDGE('',*,*,#401523,.T.); +#401523 = EDGE_CURVE('',#401491,#401524,#401526,.T.); +#401524 = VERTEX_POINT('',#401525); +#401525 = CARTESIAN_POINT('',(140.3625,-76.8875,-4.E-02)); +#401526 = LINE('',#401527,#401528); +#401527 = CARTESIAN_POINT('',(139.9125,-76.8875,-4.E-02)); +#401528 = VECTOR('',#401529,1.); +#401529 = DIRECTION('',(1.,0.,0.)); +#401530 = ORIENTED_EDGE('',*,*,#401531,.F.); +#401531 = EDGE_CURVE('',#401532,#401524,#401534,.T.); +#401532 = VERTEX_POINT('',#401533); +#401533 = CARTESIAN_POINT('',(140.3625,-76.8875,0.)); +#401534 = LINE('',#401535,#401536); +#401535 = CARTESIAN_POINT('',(140.3625,-76.8875,0.)); +#401536 = VECTOR('',#401537,1.); +#401537 = DIRECTION('',(0.,0.,-1.)); +#401538 = ORIENTED_EDGE('',*,*,#401539,.F.); +#401539 = EDGE_CURVE('',#401500,#401532,#401540,.T.); +#401540 = LINE('',#401541,#401542); +#401541 = CARTESIAN_POINT('',(139.9125,-76.8875,0.)); +#401542 = VECTOR('',#401543,1.); +#401543 = DIRECTION('',(1.,0.,0.)); +#401544 = PLANE('',#401545); +#401545 = AXIS2_PLACEMENT_3D('',#401546,#401547,#401548); +#401546 = CARTESIAN_POINT('',(139.9125,-76.8875,0.)); +#401547 = DIRECTION('',(0.,-1.,0.)); +#401548 = DIRECTION('',(1.,0.,0.)); +#401549 = ADVANCED_FACE('',(#401550),#401577,.T.); +#401550 = FACE_BOUND('',#401551,.F.); +#401551 = EDGE_LOOP('',(#401552,#401553,#401562,#401570)); +#401552 = ORIENTED_EDGE('',*,*,#401531,.T.); +#401553 = ORIENTED_EDGE('',*,*,#401554,.T.); +#401554 = EDGE_CURVE('',#401524,#401555,#401557,.T.); +#401555 = VERTEX_POINT('',#401556); +#401556 = CARTESIAN_POINT('',(140.45,-76.975,-4.E-02)); +#401557 = CIRCLE('',#401558,8.749946518204E-02); +#401558 = AXIS2_PLACEMENT_3D('',#401559,#401560,#401561); +#401559 = CARTESIAN_POINT('',(140.36250053482,-76.97499946518,-4.E-02)); +#401560 = DIRECTION('',(0.,0.,-1.)); +#401561 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401562 = ORIENTED_EDGE('',*,*,#401563,.F.); +#401563 = EDGE_CURVE('',#401564,#401555,#401566,.T.); +#401564 = VERTEX_POINT('',#401565); +#401565 = CARTESIAN_POINT('',(140.45,-76.975,0.)); +#401566 = LINE('',#401567,#401568); +#401567 = CARTESIAN_POINT('',(140.45,-76.975,0.)); +#401568 = VECTOR('',#401569,1.); +#401569 = DIRECTION('',(0.,0.,-1.)); +#401570 = ORIENTED_EDGE('',*,*,#401571,.F.); +#401571 = EDGE_CURVE('',#401532,#401564,#401572,.T.); +#401572 = CIRCLE('',#401573,8.749946518204E-02); +#401573 = AXIS2_PLACEMENT_3D('',#401574,#401575,#401576); +#401574 = CARTESIAN_POINT('',(140.36250053482,-76.97499946518,0.)); +#401575 = DIRECTION('',(0.,0.,-1.)); +#401576 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401577 = CYLINDRICAL_SURFACE('',#401578,8.749946518204E-02); +#401578 = AXIS2_PLACEMENT_3D('',#401579,#401580,#401581); +#401579 = CARTESIAN_POINT('',(140.36250053482,-76.97499946518,0.)); +#401580 = DIRECTION('',(-0.,-0.,1.)); +#401581 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401582 = ADVANCED_FACE('',(#401583),#401608,.F.); +#401583 = FACE_BOUND('',#401584,.F.); +#401584 = EDGE_LOOP('',(#401585,#401586,#401594,#401602)); +#401585 = ORIENTED_EDGE('',*,*,#401563,.T.); +#401586 = ORIENTED_EDGE('',*,*,#401587,.T.); +#401587 = EDGE_CURVE('',#401555,#401588,#401590,.T.); +#401588 = VERTEX_POINT('',#401589); +#401589 = CARTESIAN_POINT('',(140.45,-77.15,-4.E-02)); +#401590 = LINE('',#401591,#401592); +#401591 = CARTESIAN_POINT('',(140.45,-76.975,-4.E-02)); +#401592 = VECTOR('',#401593,1.); +#401593 = DIRECTION('',(0.,-1.,0.)); +#401594 = ORIENTED_EDGE('',*,*,#401595,.F.); +#401595 = EDGE_CURVE('',#401596,#401588,#401598,.T.); +#401596 = VERTEX_POINT('',#401597); +#401597 = CARTESIAN_POINT('',(140.45,-77.15,0.)); +#401598 = LINE('',#401599,#401600); +#401599 = CARTESIAN_POINT('',(140.45,-77.15,0.)); +#401600 = VECTOR('',#401601,1.); +#401601 = DIRECTION('',(0.,0.,-1.)); +#401602 = ORIENTED_EDGE('',*,*,#401603,.F.); +#401603 = EDGE_CURVE('',#401564,#401596,#401604,.T.); +#401604 = LINE('',#401605,#401606); +#401605 = CARTESIAN_POINT('',(140.45,-76.975,0.)); +#401606 = VECTOR('',#401607,1.); +#401607 = DIRECTION('',(0.,-1.,0.)); +#401608 = PLANE('',#401609); +#401609 = AXIS2_PLACEMENT_3D('',#401610,#401611,#401612); +#401610 = CARTESIAN_POINT('',(140.45,-76.975,0.)); +#401611 = DIRECTION('',(-1.,-0.,-0.)); +#401612 = DIRECTION('',(0.,-1.,0.)); +#401613 = ADVANCED_FACE('',(#401614),#401641,.T.); +#401614 = FACE_BOUND('',#401615,.F.); +#401615 = EDGE_LOOP('',(#401616,#401617,#401626,#401634)); +#401616 = ORIENTED_EDGE('',*,*,#401595,.T.); +#401617 = ORIENTED_EDGE('',*,*,#401618,.T.); +#401618 = EDGE_CURVE('',#401588,#401619,#401621,.T.); +#401619 = VERTEX_POINT('',#401620); +#401620 = CARTESIAN_POINT('',(140.3625,-77.2375,-4.E-02)); +#401621 = CIRCLE('',#401622,8.749946518204E-02); +#401622 = AXIS2_PLACEMENT_3D('',#401623,#401624,#401625); +#401623 = CARTESIAN_POINT('',(140.36250053482,-77.15000053482,-4.E-02)); +#401624 = DIRECTION('',(0.,0.,-1.)); +#401625 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401626 = ORIENTED_EDGE('',*,*,#401627,.F.); +#401627 = EDGE_CURVE('',#401628,#401619,#401630,.T.); +#401628 = VERTEX_POINT('',#401629); +#401629 = CARTESIAN_POINT('',(140.3625,-77.2375,0.)); +#401630 = LINE('',#401631,#401632); +#401631 = CARTESIAN_POINT('',(140.3625,-77.2375,0.)); +#401632 = VECTOR('',#401633,1.); +#401633 = DIRECTION('',(0.,0.,-1.)); +#401634 = ORIENTED_EDGE('',*,*,#401635,.F.); +#401635 = EDGE_CURVE('',#401596,#401628,#401636,.T.); +#401636 = CIRCLE('',#401637,8.749946518204E-02); +#401637 = AXIS2_PLACEMENT_3D('',#401638,#401639,#401640); +#401638 = CARTESIAN_POINT('',(140.36250053482,-77.15000053482,0.)); +#401639 = DIRECTION('',(0.,0.,-1.)); +#401640 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401641 = CYLINDRICAL_SURFACE('',#401642,8.749946518204E-02); +#401642 = AXIS2_PLACEMENT_3D('',#401643,#401644,#401645); +#401643 = CARTESIAN_POINT('',(140.36250053482,-77.15000053482,0.)); +#401644 = DIRECTION('',(-0.,-0.,1.)); +#401645 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401646 = ADVANCED_FACE('',(#401647),#401672,.F.); +#401647 = FACE_BOUND('',#401648,.F.); +#401648 = EDGE_LOOP('',(#401649,#401650,#401658,#401666)); +#401649 = ORIENTED_EDGE('',*,*,#401627,.T.); +#401650 = ORIENTED_EDGE('',*,*,#401651,.T.); +#401651 = EDGE_CURVE('',#401619,#401652,#401654,.T.); +#401652 = VERTEX_POINT('',#401653); +#401653 = CARTESIAN_POINT('',(139.9125,-77.2375,-4.E-02)); +#401654 = LINE('',#401655,#401656); +#401655 = CARTESIAN_POINT('',(140.3625,-77.2375,-4.E-02)); +#401656 = VECTOR('',#401657,1.); +#401657 = DIRECTION('',(-1.,0.,0.)); +#401658 = ORIENTED_EDGE('',*,*,#401659,.F.); +#401659 = EDGE_CURVE('',#401660,#401652,#401662,.T.); +#401660 = VERTEX_POINT('',#401661); +#401661 = CARTESIAN_POINT('',(139.9125,-77.2375,0.)); +#401662 = LINE('',#401663,#401664); +#401663 = CARTESIAN_POINT('',(139.9125,-77.2375,0.)); +#401664 = VECTOR('',#401665,1.); +#401665 = DIRECTION('',(0.,0.,-1.)); +#401666 = ORIENTED_EDGE('',*,*,#401667,.F.); +#401667 = EDGE_CURVE('',#401628,#401660,#401668,.T.); +#401668 = LINE('',#401669,#401670); +#401669 = CARTESIAN_POINT('',(140.3625,-77.2375,0.)); +#401670 = VECTOR('',#401671,1.); +#401671 = DIRECTION('',(-1.,0.,0.)); +#401672 = PLANE('',#401673); +#401673 = AXIS2_PLACEMENT_3D('',#401674,#401675,#401676); +#401674 = CARTESIAN_POINT('',(140.3625,-77.2375,0.)); +#401675 = DIRECTION('',(0.,1.,0.)); +#401676 = DIRECTION('',(-1.,0.,0.)); +#401677 = ADVANCED_FACE('',(#401678),#401705,.T.); +#401678 = FACE_BOUND('',#401679,.F.); +#401679 = EDGE_LOOP('',(#401680,#401681,#401690,#401698)); +#401680 = ORIENTED_EDGE('',*,*,#401659,.T.); +#401681 = ORIENTED_EDGE('',*,*,#401682,.T.); +#401682 = EDGE_CURVE('',#401652,#401683,#401685,.T.); +#401683 = VERTEX_POINT('',#401684); +#401684 = CARTESIAN_POINT('',(139.825,-77.15,-4.E-02)); +#401685 = CIRCLE('',#401686,8.74994651821E-02); +#401686 = AXIS2_PLACEMENT_3D('',#401687,#401688,#401689); +#401687 = CARTESIAN_POINT('',(139.91249946518,-77.15000053482,-4.E-02)); +#401688 = DIRECTION('',(0.,0.,-1.)); +#401689 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401690 = ORIENTED_EDGE('',*,*,#401691,.F.); +#401691 = EDGE_CURVE('',#401692,#401683,#401694,.T.); +#401692 = VERTEX_POINT('',#401693); +#401693 = CARTESIAN_POINT('',(139.825,-77.15,0.)); +#401694 = LINE('',#401695,#401696); +#401695 = CARTESIAN_POINT('',(139.825,-77.15,0.)); +#401696 = VECTOR('',#401697,1.); +#401697 = DIRECTION('',(0.,0.,-1.)); +#401698 = ORIENTED_EDGE('',*,*,#401699,.F.); +#401699 = EDGE_CURVE('',#401660,#401692,#401700,.T.); +#401700 = CIRCLE('',#401701,8.74994651821E-02); +#401701 = AXIS2_PLACEMENT_3D('',#401702,#401703,#401704); +#401702 = CARTESIAN_POINT('',(139.91249946518,-77.15000053482,0.)); +#401703 = DIRECTION('',(0.,0.,-1.)); +#401704 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401705 = CYLINDRICAL_SURFACE('',#401706,8.74994651821E-02); +#401706 = AXIS2_PLACEMENT_3D('',#401707,#401708,#401709); +#401707 = CARTESIAN_POINT('',(139.91249946518,-77.15000053482,0.)); +#401708 = DIRECTION('',(-0.,-0.,1.)); +#401709 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401710 = ADVANCED_FACE('',(#401711),#401727,.F.); +#401711 = FACE_BOUND('',#401712,.F.); +#401712 = EDGE_LOOP('',(#401713,#401714,#401720,#401721)); +#401713 = ORIENTED_EDGE('',*,*,#401691,.T.); +#401714 = ORIENTED_EDGE('',*,*,#401715,.T.); +#401715 = EDGE_CURVE('',#401683,#401483,#401716,.T.); +#401716 = LINE('',#401717,#401718); +#401717 = CARTESIAN_POINT('',(139.825,-77.15,-4.E-02)); +#401718 = VECTOR('',#401719,1.); +#401719 = DIRECTION('',(0.,1.,0.)); +#401720 = ORIENTED_EDGE('',*,*,#401480,.F.); +#401721 = ORIENTED_EDGE('',*,*,#401722,.F.); +#401722 = EDGE_CURVE('',#401692,#401481,#401723,.T.); +#401723 = LINE('',#401724,#401725); +#401724 = CARTESIAN_POINT('',(139.825,-77.15,0.)); +#401725 = VECTOR('',#401726,1.); +#401726 = DIRECTION('',(0.,1.,0.)); +#401727 = PLANE('',#401728); +#401728 = AXIS2_PLACEMENT_3D('',#401729,#401730,#401731); +#401729 = CARTESIAN_POINT('',(139.825,-77.15,0.)); +#401730 = DIRECTION('',(1.,-0.,0.)); +#401731 = DIRECTION('',(0.,1.,0.)); +#401732 = ADVANCED_FACE('',(#401733),#401743,.F.); +#401733 = FACE_BOUND('',#401734,.F.); +#401734 = EDGE_LOOP('',(#401735,#401736,#401737,#401738,#401739,#401740, + #401741,#401742)); +#401735 = ORIENTED_EDGE('',*,*,#401507,.T.); +#401736 = ORIENTED_EDGE('',*,*,#401539,.T.); +#401737 = ORIENTED_EDGE('',*,*,#401571,.T.); +#401738 = ORIENTED_EDGE('',*,*,#401603,.T.); +#401739 = ORIENTED_EDGE('',*,*,#401635,.T.); +#401740 = ORIENTED_EDGE('',*,*,#401667,.T.); +#401741 = ORIENTED_EDGE('',*,*,#401699,.T.); +#401742 = ORIENTED_EDGE('',*,*,#401722,.T.); +#401743 = PLANE('',#401744); +#401744 = AXIS2_PLACEMENT_3D('',#401745,#401746,#401747); +#401745 = CARTESIAN_POINT('',(0.,0.,0.)); +#401746 = DIRECTION('',(-0.,-0.,-1.)); +#401747 = DIRECTION('',(-1.,0.,0.)); +#401748 = ADVANCED_FACE('',(#401749),#401759,.T.); +#401749 = FACE_BOUND('',#401750,.T.); +#401750 = EDGE_LOOP('',(#401751,#401752,#401753,#401754,#401755,#401756, + #401757,#401758)); +#401751 = ORIENTED_EDGE('',*,*,#401490,.T.); +#401752 = ORIENTED_EDGE('',*,*,#401523,.T.); +#401753 = ORIENTED_EDGE('',*,*,#401554,.T.); +#401754 = ORIENTED_EDGE('',*,*,#401587,.T.); +#401755 = ORIENTED_EDGE('',*,*,#401618,.T.); +#401756 = ORIENTED_EDGE('',*,*,#401651,.T.); +#401757 = ORIENTED_EDGE('',*,*,#401682,.T.); +#401758 = ORIENTED_EDGE('',*,*,#401715,.T.); +#401759 = PLANE('',#401760); +#401760 = AXIS2_PLACEMENT_3D('',#401761,#401762,#401763); +#401761 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#401762 = DIRECTION('',(-0.,-0.,-1.)); +#401763 = DIRECTION('',(-1.,0.,0.)); +#401764 = MANIFOLD_SOLID_BREP('',#401765); +#401765 = CLOSED_SHELL('',(#401766,#401808,#401839,#401872,#401903, + #401936,#401967,#402000,#402022,#402038)); +#401766 = ADVANCED_FACE('',(#401767),#401803,.T.); +#401767 = FACE_BOUND('',#401768,.F.); +#401768 = EDGE_LOOP('',(#401769,#401779,#401788,#401796)); +#401769 = ORIENTED_EDGE('',*,*,#401770,.T.); +#401770 = EDGE_CURVE('',#401771,#401773,#401775,.T.); +#401771 = VERTEX_POINT('',#401772); +#401772 = CARTESIAN_POINT('',(139.825,-76.475,0.)); +#401773 = VERTEX_POINT('',#401774); +#401774 = CARTESIAN_POINT('',(139.825,-76.475,-4.E-02)); +#401775 = LINE('',#401776,#401777); +#401776 = CARTESIAN_POINT('',(139.825,-76.475,0.)); +#401777 = VECTOR('',#401778,1.); +#401778 = DIRECTION('',(0.,0.,-1.)); +#401779 = ORIENTED_EDGE('',*,*,#401780,.T.); +#401780 = EDGE_CURVE('',#401773,#401781,#401783,.T.); +#401781 = VERTEX_POINT('',#401782); +#401782 = CARTESIAN_POINT('',(139.9125,-76.3875,-4.E-02)); +#401783 = CIRCLE('',#401784,8.74994651821E-02); +#401784 = AXIS2_PLACEMENT_3D('',#401785,#401786,#401787); +#401785 = CARTESIAN_POINT('',(139.91249946518,-76.47499946518,-4.E-02)); +#401786 = DIRECTION('',(0.,0.,-1.)); +#401787 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401788 = ORIENTED_EDGE('',*,*,#401789,.F.); +#401789 = EDGE_CURVE('',#401790,#401781,#401792,.T.); +#401790 = VERTEX_POINT('',#401791); +#401791 = CARTESIAN_POINT('',(139.9125,-76.3875,0.)); +#401792 = LINE('',#401793,#401794); +#401793 = CARTESIAN_POINT('',(139.9125,-76.3875,0.)); +#401794 = VECTOR('',#401795,1.); +#401795 = DIRECTION('',(0.,0.,-1.)); +#401796 = ORIENTED_EDGE('',*,*,#401797,.F.); +#401797 = EDGE_CURVE('',#401771,#401790,#401798,.T.); +#401798 = CIRCLE('',#401799,8.74994651821E-02); +#401799 = AXIS2_PLACEMENT_3D('',#401800,#401801,#401802); +#401800 = CARTESIAN_POINT('',(139.91249946518,-76.47499946518,0.)); +#401801 = DIRECTION('',(0.,0.,-1.)); +#401802 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401803 = CYLINDRICAL_SURFACE('',#401804,8.74994651821E-02); +#401804 = AXIS2_PLACEMENT_3D('',#401805,#401806,#401807); +#401805 = CARTESIAN_POINT('',(139.91249946518,-76.47499946518,0.)); +#401806 = DIRECTION('',(-0.,-0.,1.)); +#401807 = DIRECTION('',(-0.999999999981,-6.112260447683E-06,-0.)); +#401808 = ADVANCED_FACE('',(#401809),#401834,.F.); +#401809 = FACE_BOUND('',#401810,.F.); +#401810 = EDGE_LOOP('',(#401811,#401812,#401820,#401828)); +#401811 = ORIENTED_EDGE('',*,*,#401789,.T.); +#401812 = ORIENTED_EDGE('',*,*,#401813,.T.); +#401813 = EDGE_CURVE('',#401781,#401814,#401816,.T.); +#401814 = VERTEX_POINT('',#401815); +#401815 = CARTESIAN_POINT('',(140.3625,-76.3875,-4.E-02)); +#401816 = LINE('',#401817,#401818); +#401817 = CARTESIAN_POINT('',(139.9125,-76.3875,-4.E-02)); +#401818 = VECTOR('',#401819,1.); +#401819 = DIRECTION('',(1.,0.,0.)); +#401820 = ORIENTED_EDGE('',*,*,#401821,.F.); +#401821 = EDGE_CURVE('',#401822,#401814,#401824,.T.); +#401822 = VERTEX_POINT('',#401823); +#401823 = CARTESIAN_POINT('',(140.3625,-76.3875,0.)); +#401824 = LINE('',#401825,#401826); +#401825 = CARTESIAN_POINT('',(140.3625,-76.3875,0.)); +#401826 = VECTOR('',#401827,1.); +#401827 = DIRECTION('',(0.,0.,-1.)); +#401828 = ORIENTED_EDGE('',*,*,#401829,.F.); +#401829 = EDGE_CURVE('',#401790,#401822,#401830,.T.); +#401830 = LINE('',#401831,#401832); +#401831 = CARTESIAN_POINT('',(139.9125,-76.3875,0.)); +#401832 = VECTOR('',#401833,1.); +#401833 = DIRECTION('',(1.,0.,0.)); +#401834 = PLANE('',#401835); +#401835 = AXIS2_PLACEMENT_3D('',#401836,#401837,#401838); +#401836 = CARTESIAN_POINT('',(139.9125,-76.3875,0.)); +#401837 = DIRECTION('',(0.,-1.,0.)); +#401838 = DIRECTION('',(1.,0.,0.)); +#401839 = ADVANCED_FACE('',(#401840),#401867,.T.); +#401840 = FACE_BOUND('',#401841,.F.); +#401841 = EDGE_LOOP('',(#401842,#401843,#401852,#401860)); +#401842 = ORIENTED_EDGE('',*,*,#401821,.T.); +#401843 = ORIENTED_EDGE('',*,*,#401844,.T.); +#401844 = EDGE_CURVE('',#401814,#401845,#401847,.T.); +#401845 = VERTEX_POINT('',#401846); +#401846 = CARTESIAN_POINT('',(140.45,-76.475,-4.E-02)); +#401847 = CIRCLE('',#401848,8.749946518204E-02); +#401848 = AXIS2_PLACEMENT_3D('',#401849,#401850,#401851); +#401849 = CARTESIAN_POINT('',(140.36250053482,-76.47499946518,-4.E-02)); +#401850 = DIRECTION('',(0.,0.,-1.)); +#401851 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401852 = ORIENTED_EDGE('',*,*,#401853,.F.); +#401853 = EDGE_CURVE('',#401854,#401845,#401856,.T.); +#401854 = VERTEX_POINT('',#401855); +#401855 = CARTESIAN_POINT('',(140.45,-76.475,0.)); +#401856 = LINE('',#401857,#401858); +#401857 = CARTESIAN_POINT('',(140.45,-76.475,0.)); +#401858 = VECTOR('',#401859,1.); +#401859 = DIRECTION('',(0.,0.,-1.)); +#401860 = ORIENTED_EDGE('',*,*,#401861,.F.); +#401861 = EDGE_CURVE('',#401822,#401854,#401862,.T.); +#401862 = CIRCLE('',#401863,8.749946518204E-02); +#401863 = AXIS2_PLACEMENT_3D('',#401864,#401865,#401866); +#401864 = CARTESIAN_POINT('',(140.36250053482,-76.47499946518,0.)); +#401865 = DIRECTION('',(0.,0.,-1.)); +#401866 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401867 = CYLINDRICAL_SURFACE('',#401868,8.749946518204E-02); +#401868 = AXIS2_PLACEMENT_3D('',#401869,#401870,#401871); +#401869 = CARTESIAN_POINT('',(140.36250053482,-76.47499946518,0.)); +#401870 = DIRECTION('',(-0.,-0.,1.)); +#401871 = DIRECTION('',(-6.112261097329E-06,0.999999999981,0.)); +#401872 = ADVANCED_FACE('',(#401873),#401898,.F.); +#401873 = FACE_BOUND('',#401874,.F.); +#401874 = EDGE_LOOP('',(#401875,#401876,#401884,#401892)); +#401875 = ORIENTED_EDGE('',*,*,#401853,.T.); +#401876 = ORIENTED_EDGE('',*,*,#401877,.T.); +#401877 = EDGE_CURVE('',#401845,#401878,#401880,.T.); +#401878 = VERTEX_POINT('',#401879); +#401879 = CARTESIAN_POINT('',(140.45,-76.65,-4.E-02)); +#401880 = LINE('',#401881,#401882); +#401881 = CARTESIAN_POINT('',(140.45,-76.475,-4.E-02)); +#401882 = VECTOR('',#401883,1.); +#401883 = DIRECTION('',(0.,-1.,0.)); +#401884 = ORIENTED_EDGE('',*,*,#401885,.F.); +#401885 = EDGE_CURVE('',#401886,#401878,#401888,.T.); +#401886 = VERTEX_POINT('',#401887); +#401887 = CARTESIAN_POINT('',(140.45,-76.65,0.)); +#401888 = LINE('',#401889,#401890); +#401889 = CARTESIAN_POINT('',(140.45,-76.65,0.)); +#401890 = VECTOR('',#401891,1.); +#401891 = DIRECTION('',(0.,0.,-1.)); +#401892 = ORIENTED_EDGE('',*,*,#401893,.F.); +#401893 = EDGE_CURVE('',#401854,#401886,#401894,.T.); +#401894 = LINE('',#401895,#401896); +#401895 = CARTESIAN_POINT('',(140.45,-76.475,0.)); +#401896 = VECTOR('',#401897,1.); +#401897 = DIRECTION('',(0.,-1.,0.)); +#401898 = PLANE('',#401899); +#401899 = AXIS2_PLACEMENT_3D('',#401900,#401901,#401902); +#401900 = CARTESIAN_POINT('',(140.45,-76.475,0.)); +#401901 = DIRECTION('',(-1.,-0.,-0.)); +#401902 = DIRECTION('',(0.,-1.,0.)); +#401903 = ADVANCED_FACE('',(#401904),#401931,.T.); +#401904 = FACE_BOUND('',#401905,.F.); +#401905 = EDGE_LOOP('',(#401906,#401907,#401916,#401924)); +#401906 = ORIENTED_EDGE('',*,*,#401885,.T.); +#401907 = ORIENTED_EDGE('',*,*,#401908,.T.); +#401908 = EDGE_CURVE('',#401878,#401909,#401911,.T.); +#401909 = VERTEX_POINT('',#401910); +#401910 = CARTESIAN_POINT('',(140.3625,-76.7375,-4.E-02)); +#401911 = CIRCLE('',#401912,8.749946518204E-02); +#401912 = AXIS2_PLACEMENT_3D('',#401913,#401914,#401915); +#401913 = CARTESIAN_POINT('',(140.36250053482,-76.65000053482,-4.E-02)); +#401914 = DIRECTION('',(0.,0.,-1.)); +#401915 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401916 = ORIENTED_EDGE('',*,*,#401917,.F.); +#401917 = EDGE_CURVE('',#401918,#401909,#401920,.T.); +#401918 = VERTEX_POINT('',#401919); +#401919 = CARTESIAN_POINT('',(140.3625,-76.7375,0.)); +#401920 = LINE('',#401921,#401922); +#401921 = CARTESIAN_POINT('',(140.3625,-76.7375,0.)); +#401922 = VECTOR('',#401923,1.); +#401923 = DIRECTION('',(0.,0.,-1.)); +#401924 = ORIENTED_EDGE('',*,*,#401925,.F.); +#401925 = EDGE_CURVE('',#401886,#401918,#401926,.T.); +#401926 = CIRCLE('',#401927,8.749946518204E-02); +#401927 = AXIS2_PLACEMENT_3D('',#401928,#401929,#401930); +#401928 = CARTESIAN_POINT('',(140.36250053482,-76.65000053482,0.)); +#401929 = DIRECTION('',(0.,0.,-1.)); +#401930 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401931 = CYLINDRICAL_SURFACE('',#401932,8.749946518204E-02); +#401932 = AXIS2_PLACEMENT_3D('',#401933,#401934,#401935); +#401933 = CARTESIAN_POINT('',(140.36250053482,-76.65000053482,0.)); +#401934 = DIRECTION('',(-0.,-0.,1.)); +#401935 = DIRECTION('',(0.999999999981,6.11226109733E-06,0.)); +#401936 = ADVANCED_FACE('',(#401937),#401962,.F.); +#401937 = FACE_BOUND('',#401938,.F.); +#401938 = EDGE_LOOP('',(#401939,#401940,#401948,#401956)); +#401939 = ORIENTED_EDGE('',*,*,#401917,.T.); +#401940 = ORIENTED_EDGE('',*,*,#401941,.T.); +#401941 = EDGE_CURVE('',#401909,#401942,#401944,.T.); +#401942 = VERTEX_POINT('',#401943); +#401943 = CARTESIAN_POINT('',(139.9125,-76.7375,-4.E-02)); +#401944 = LINE('',#401945,#401946); +#401945 = CARTESIAN_POINT('',(140.3625,-76.7375,-4.E-02)); +#401946 = VECTOR('',#401947,1.); +#401947 = DIRECTION('',(-1.,0.,0.)); +#401948 = ORIENTED_EDGE('',*,*,#401949,.F.); +#401949 = EDGE_CURVE('',#401950,#401942,#401952,.T.); +#401950 = VERTEX_POINT('',#401951); +#401951 = CARTESIAN_POINT('',(139.9125,-76.7375,0.)); +#401952 = LINE('',#401953,#401954); +#401953 = CARTESIAN_POINT('',(139.9125,-76.7375,0.)); +#401954 = VECTOR('',#401955,1.); +#401955 = DIRECTION('',(0.,0.,-1.)); +#401956 = ORIENTED_EDGE('',*,*,#401957,.F.); +#401957 = EDGE_CURVE('',#401918,#401950,#401958,.T.); +#401958 = LINE('',#401959,#401960); +#401959 = CARTESIAN_POINT('',(140.3625,-76.7375,0.)); +#401960 = VECTOR('',#401961,1.); +#401961 = DIRECTION('',(-1.,0.,0.)); +#401962 = PLANE('',#401963); +#401963 = AXIS2_PLACEMENT_3D('',#401964,#401965,#401966); +#401964 = CARTESIAN_POINT('',(140.3625,-76.7375,0.)); +#401965 = DIRECTION('',(0.,1.,0.)); +#401966 = DIRECTION('',(-1.,0.,0.)); +#401967 = ADVANCED_FACE('',(#401968),#401995,.T.); +#401968 = FACE_BOUND('',#401969,.F.); +#401969 = EDGE_LOOP('',(#401970,#401971,#401980,#401988)); +#401970 = ORIENTED_EDGE('',*,*,#401949,.T.); +#401971 = ORIENTED_EDGE('',*,*,#401972,.T.); +#401972 = EDGE_CURVE('',#401942,#401973,#401975,.T.); +#401973 = VERTEX_POINT('',#401974); +#401974 = CARTESIAN_POINT('',(139.825,-76.65,-4.E-02)); +#401975 = CIRCLE('',#401976,8.74994651821E-02); +#401976 = AXIS2_PLACEMENT_3D('',#401977,#401978,#401979); +#401977 = CARTESIAN_POINT('',(139.91249946518,-76.65000053482,-4.E-02)); +#401978 = DIRECTION('',(0.,0.,-1.)); +#401979 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401980 = ORIENTED_EDGE('',*,*,#401981,.F.); +#401981 = EDGE_CURVE('',#401982,#401973,#401984,.T.); +#401982 = VERTEX_POINT('',#401983); +#401983 = CARTESIAN_POINT('',(139.825,-76.65,0.)); +#401984 = LINE('',#401985,#401986); +#401985 = CARTESIAN_POINT('',(139.825,-76.65,0.)); +#401986 = VECTOR('',#401987,1.); +#401987 = DIRECTION('',(0.,0.,-1.)); +#401988 = ORIENTED_EDGE('',*,*,#401989,.F.); +#401989 = EDGE_CURVE('',#401950,#401982,#401990,.T.); +#401990 = CIRCLE('',#401991,8.74994651821E-02); +#401991 = AXIS2_PLACEMENT_3D('',#401992,#401993,#401994); +#401992 = CARTESIAN_POINT('',(139.91249946518,-76.65000053482,0.)); +#401993 = DIRECTION('',(0.,0.,-1.)); +#401994 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#401995 = CYLINDRICAL_SURFACE('',#401996,8.74994651821E-02); +#401996 = AXIS2_PLACEMENT_3D('',#401997,#401998,#401999); +#401997 = CARTESIAN_POINT('',(139.91249946518,-76.65000053482,0.)); +#401998 = DIRECTION('',(-0.,-0.,1.)); +#401999 = DIRECTION('',(6.112260772504E-06,-0.999999999981,0.)); +#402000 = ADVANCED_FACE('',(#402001),#402017,.F.); +#402001 = FACE_BOUND('',#402002,.F.); +#402002 = EDGE_LOOP('',(#402003,#402004,#402010,#402011)); +#402003 = ORIENTED_EDGE('',*,*,#401981,.T.); +#402004 = ORIENTED_EDGE('',*,*,#402005,.T.); +#402005 = EDGE_CURVE('',#401973,#401773,#402006,.T.); +#402006 = LINE('',#402007,#402008); +#402007 = CARTESIAN_POINT('',(139.825,-76.65,-4.E-02)); +#402008 = VECTOR('',#402009,1.); +#402009 = DIRECTION('',(0.,1.,0.)); +#402010 = ORIENTED_EDGE('',*,*,#401770,.F.); +#402011 = ORIENTED_EDGE('',*,*,#402012,.F.); +#402012 = EDGE_CURVE('',#401982,#401771,#402013,.T.); +#402013 = LINE('',#402014,#402015); +#402014 = CARTESIAN_POINT('',(139.825,-76.65,0.)); +#402015 = VECTOR('',#402016,1.); +#402016 = DIRECTION('',(0.,1.,0.)); +#402017 = PLANE('',#402018); +#402018 = AXIS2_PLACEMENT_3D('',#402019,#402020,#402021); +#402019 = CARTESIAN_POINT('',(139.825,-76.65,0.)); +#402020 = DIRECTION('',(1.,-0.,0.)); +#402021 = DIRECTION('',(0.,1.,0.)); +#402022 = ADVANCED_FACE('',(#402023),#402033,.F.); +#402023 = FACE_BOUND('',#402024,.F.); +#402024 = EDGE_LOOP('',(#402025,#402026,#402027,#402028,#402029,#402030, + #402031,#402032)); +#402025 = ORIENTED_EDGE('',*,*,#401797,.T.); +#402026 = ORIENTED_EDGE('',*,*,#401829,.T.); +#402027 = ORIENTED_EDGE('',*,*,#401861,.T.); +#402028 = ORIENTED_EDGE('',*,*,#401893,.T.); +#402029 = ORIENTED_EDGE('',*,*,#401925,.T.); +#402030 = ORIENTED_EDGE('',*,*,#401957,.T.); +#402031 = ORIENTED_EDGE('',*,*,#401989,.T.); +#402032 = ORIENTED_EDGE('',*,*,#402012,.T.); +#402033 = PLANE('',#402034); +#402034 = AXIS2_PLACEMENT_3D('',#402035,#402036,#402037); +#402035 = CARTESIAN_POINT('',(0.,0.,0.)); +#402036 = DIRECTION('',(-0.,-0.,-1.)); +#402037 = DIRECTION('',(-1.,0.,0.)); +#402038 = ADVANCED_FACE('',(#402039),#402049,.T.); +#402039 = FACE_BOUND('',#402040,.T.); +#402040 = EDGE_LOOP('',(#402041,#402042,#402043,#402044,#402045,#402046, + #402047,#402048)); +#402041 = ORIENTED_EDGE('',*,*,#401780,.T.); +#402042 = ORIENTED_EDGE('',*,*,#401813,.T.); +#402043 = ORIENTED_EDGE('',*,*,#401844,.T.); +#402044 = ORIENTED_EDGE('',*,*,#401877,.T.); +#402045 = ORIENTED_EDGE('',*,*,#401908,.T.); +#402046 = ORIENTED_EDGE('',*,*,#401941,.T.); +#402047 = ORIENTED_EDGE('',*,*,#401972,.T.); +#402048 = ORIENTED_EDGE('',*,*,#402005,.T.); +#402049 = PLANE('',#402050); +#402050 = AXIS2_PLACEMENT_3D('',#402051,#402052,#402053); +#402051 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#402052 = DIRECTION('',(-0.,-0.,-1.)); +#402053 = DIRECTION('',(-1.,0.,0.)); +#402054 = MANIFOLD_SOLID_BREP('',#402055); +#402055 = CLOSED_SHELL('',(#402056,#402098,#402129,#402162,#402193, + #402226,#402257,#402290,#402312,#402328)); +#402056 = ADVANCED_FACE('',(#402057),#402093,.T.); +#402057 = FACE_BOUND('',#402058,.F.); +#402058 = EDGE_LOOP('',(#402059,#402069,#402078,#402086)); +#402059 = ORIENTED_EDGE('',*,*,#402060,.T.); +#402060 = EDGE_CURVE('',#402061,#402063,#402065,.T.); +#402061 = VERTEX_POINT('',#402062); +#402062 = CARTESIAN_POINT('',(129.05,-105.025,0.)); +#402063 = VERTEX_POINT('',#402064); +#402064 = CARTESIAN_POINT('',(129.05,-105.025,-4.E-02)); +#402065 = LINE('',#402066,#402067); +#402066 = CARTESIAN_POINT('',(129.05,-105.025,0.)); +#402067 = VECTOR('',#402068,1.); +#402068 = DIRECTION('',(0.,0.,-1.)); +#402069 = ORIENTED_EDGE('',*,*,#402070,.T.); +#402070 = EDGE_CURVE('',#402063,#402071,#402073,.T.); +#402071 = VERTEX_POINT('',#402072); +#402072 = CARTESIAN_POINT('',(129.3,-104.775,-4.E-02)); +#402073 = CIRCLE('',#402074,0.249998959685); +#402074 = AXIS2_PLACEMENT_3D('',#402075,#402076,#402077); +#402075 = CARTESIAN_POINT('',(129.29999895968,-105.0249989596,-4.E-02)); +#402076 = DIRECTION('',(0.,0.,-1.)); +#402077 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#402078 = ORIENTED_EDGE('',*,*,#402079,.F.); +#402079 = EDGE_CURVE('',#402080,#402071,#402082,.T.); +#402080 = VERTEX_POINT('',#402081); +#402081 = CARTESIAN_POINT('',(129.3,-104.775,0.)); +#402082 = LINE('',#402083,#402084); +#402083 = CARTESIAN_POINT('',(129.3,-104.775,0.)); +#402084 = VECTOR('',#402085,1.); +#402085 = DIRECTION('',(0.,0.,-1.)); +#402086 = ORIENTED_EDGE('',*,*,#402087,.F.); +#402087 = EDGE_CURVE('',#402061,#402080,#402088,.T.); +#402088 = CIRCLE('',#402089,0.249998959685); +#402089 = AXIS2_PLACEMENT_3D('',#402090,#402091,#402092); +#402090 = CARTESIAN_POINT('',(129.29999895968,-105.0249989596,0.)); +#402091 = DIRECTION('',(0.,0.,-1.)); +#402092 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#402093 = CYLINDRICAL_SURFACE('',#402094,0.249998959685); +#402094 = AXIS2_PLACEMENT_3D('',#402095,#402096,#402097); +#402095 = CARTESIAN_POINT('',(129.29999895968,-105.0249989596,0.)); +#402096 = DIRECTION('',(-0.,-0.,1.)); +#402097 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#402098 = ADVANCED_FACE('',(#402099),#402124,.F.); +#402099 = FACE_BOUND('',#402100,.F.); +#402100 = EDGE_LOOP('',(#402101,#402102,#402110,#402118)); +#402101 = ORIENTED_EDGE('',*,*,#402079,.T.); +#402102 = ORIENTED_EDGE('',*,*,#402103,.T.); +#402103 = EDGE_CURVE('',#402071,#402104,#402106,.T.); +#402104 = VERTEX_POINT('',#402105); +#402105 = CARTESIAN_POINT('',(129.8,-104.775,-4.E-02)); +#402106 = LINE('',#402107,#402108); +#402107 = CARTESIAN_POINT('',(129.3,-104.775,-4.E-02)); +#402108 = VECTOR('',#402109,1.); +#402109 = DIRECTION('',(1.,0.,0.)); +#402110 = ORIENTED_EDGE('',*,*,#402111,.F.); +#402111 = EDGE_CURVE('',#402112,#402104,#402114,.T.); +#402112 = VERTEX_POINT('',#402113); +#402113 = CARTESIAN_POINT('',(129.8,-104.775,0.)); +#402114 = LINE('',#402115,#402116); +#402115 = CARTESIAN_POINT('',(129.8,-104.775,0.)); +#402116 = VECTOR('',#402117,1.); +#402117 = DIRECTION('',(0.,0.,-1.)); +#402118 = ORIENTED_EDGE('',*,*,#402119,.F.); +#402119 = EDGE_CURVE('',#402080,#402112,#402120,.T.); +#402120 = LINE('',#402121,#402122); +#402121 = CARTESIAN_POINT('',(129.3,-104.775,0.)); +#402122 = VECTOR('',#402123,1.); +#402123 = DIRECTION('',(1.,0.,0.)); +#402124 = PLANE('',#402125); +#402125 = AXIS2_PLACEMENT_3D('',#402126,#402127,#402128); +#402126 = CARTESIAN_POINT('',(129.3,-104.775,0.)); +#402127 = DIRECTION('',(0.,-1.,0.)); +#402128 = DIRECTION('',(1.,0.,0.)); +#402129 = ADVANCED_FACE('',(#402130),#402157,.T.); +#402130 = FACE_BOUND('',#402131,.F.); +#402131 = EDGE_LOOP('',(#402132,#402133,#402142,#402150)); +#402132 = ORIENTED_EDGE('',*,*,#402111,.T.); +#402133 = ORIENTED_EDGE('',*,*,#402134,.T.); +#402134 = EDGE_CURVE('',#402104,#402135,#402137,.T.); +#402135 = VERTEX_POINT('',#402136); +#402136 = CARTESIAN_POINT('',(130.05,-105.025,-4.E-02)); +#402137 = CIRCLE('',#402138,0.249998959685); +#402138 = AXIS2_PLACEMENT_3D('',#402139,#402140,#402141); +#402139 = CARTESIAN_POINT('',(129.80000104031,-105.0249989596,-4.E-02)); +#402140 = DIRECTION('',(0.,0.,-1.)); +#402141 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#402142 = ORIENTED_EDGE('',*,*,#402143,.F.); +#402143 = EDGE_CURVE('',#402144,#402135,#402146,.T.); +#402144 = VERTEX_POINT('',#402145); +#402145 = CARTESIAN_POINT('',(130.05,-105.025,0.)); +#402146 = LINE('',#402147,#402148); +#402147 = CARTESIAN_POINT('',(130.05,-105.025,0.)); +#402148 = VECTOR('',#402149,1.); +#402149 = DIRECTION('',(0.,0.,-1.)); +#402150 = ORIENTED_EDGE('',*,*,#402151,.F.); +#402151 = EDGE_CURVE('',#402112,#402144,#402152,.T.); +#402152 = CIRCLE('',#402153,0.249998959685); +#402153 = AXIS2_PLACEMENT_3D('',#402154,#402155,#402156); +#402154 = CARTESIAN_POINT('',(129.80000104031,-105.0249989596,0.)); +#402155 = DIRECTION('',(0.,0.,-1.)); +#402156 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#402157 = CYLINDRICAL_SURFACE('',#402158,0.249998959685); +#402158 = AXIS2_PLACEMENT_3D('',#402159,#402160,#402161); +#402159 = CARTESIAN_POINT('',(129.80000104031,-105.0249989596,0.)); +#402160 = DIRECTION('',(-0.,-0.,1.)); +#402161 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#402162 = ADVANCED_FACE('',(#402163),#402188,.F.); +#402163 = FACE_BOUND('',#402164,.F.); +#402164 = EDGE_LOOP('',(#402165,#402166,#402174,#402182)); +#402165 = ORIENTED_EDGE('',*,*,#402143,.T.); +#402166 = ORIENTED_EDGE('',*,*,#402167,.T.); +#402167 = EDGE_CURVE('',#402135,#402168,#402170,.T.); +#402168 = VERTEX_POINT('',#402169); +#402169 = CARTESIAN_POINT('',(130.05,-105.975,-4.E-02)); +#402170 = LINE('',#402171,#402172); +#402171 = CARTESIAN_POINT('',(130.05,-105.025,-4.E-02)); +#402172 = VECTOR('',#402173,1.); +#402173 = DIRECTION('',(0.,-1.,0.)); +#402174 = ORIENTED_EDGE('',*,*,#402175,.F.); +#402175 = EDGE_CURVE('',#402176,#402168,#402178,.T.); +#402176 = VERTEX_POINT('',#402177); +#402177 = CARTESIAN_POINT('',(130.05,-105.975,0.)); +#402178 = LINE('',#402179,#402180); +#402179 = CARTESIAN_POINT('',(130.05,-105.975,0.)); +#402180 = VECTOR('',#402181,1.); +#402181 = DIRECTION('',(0.,0.,-1.)); +#402182 = ORIENTED_EDGE('',*,*,#402183,.F.); +#402183 = EDGE_CURVE('',#402144,#402176,#402184,.T.); +#402184 = LINE('',#402185,#402186); +#402185 = CARTESIAN_POINT('',(130.05,-105.025,0.)); +#402186 = VECTOR('',#402187,1.); +#402187 = DIRECTION('',(0.,-1.,0.)); +#402188 = PLANE('',#402189); +#402189 = AXIS2_PLACEMENT_3D('',#402190,#402191,#402192); +#402190 = CARTESIAN_POINT('',(130.05,-105.025,0.)); +#402191 = DIRECTION('',(-1.,-0.,-0.)); +#402192 = DIRECTION('',(0.,-1.,0.)); +#402193 = ADVANCED_FACE('',(#402194),#402221,.T.); +#402194 = FACE_BOUND('',#402195,.F.); +#402195 = EDGE_LOOP('',(#402196,#402197,#402206,#402214)); +#402196 = ORIENTED_EDGE('',*,*,#402175,.T.); +#402197 = ORIENTED_EDGE('',*,*,#402198,.T.); +#402198 = EDGE_CURVE('',#402168,#402199,#402201,.T.); +#402199 = VERTEX_POINT('',#402200); +#402200 = CARTESIAN_POINT('',(129.8,-106.225,-4.E-02)); +#402201 = CIRCLE('',#402202,0.249998959685); +#402202 = AXIS2_PLACEMENT_3D('',#402203,#402204,#402205); +#402203 = CARTESIAN_POINT('',(129.80000104031,-105.9750010403,-4.E-02)); +#402204 = DIRECTION('',(0.,0.,-1.)); +#402205 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#402206 = ORIENTED_EDGE('',*,*,#402207,.F.); +#402207 = EDGE_CURVE('',#402208,#402199,#402210,.T.); +#402208 = VERTEX_POINT('',#402209); +#402209 = CARTESIAN_POINT('',(129.8,-106.225,0.)); +#402210 = LINE('',#402211,#402212); +#402211 = CARTESIAN_POINT('',(129.8,-106.225,0.)); +#402212 = VECTOR('',#402213,1.); +#402213 = DIRECTION('',(0.,0.,-1.)); +#402214 = ORIENTED_EDGE('',*,*,#402215,.F.); +#402215 = EDGE_CURVE('',#402176,#402208,#402216,.T.); +#402216 = CIRCLE('',#402217,0.249998959685); +#402217 = AXIS2_PLACEMENT_3D('',#402218,#402219,#402220); +#402218 = CARTESIAN_POINT('',(129.80000104031,-105.9750010403,0.)); +#402219 = DIRECTION('',(0.,0.,-1.)); +#402220 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#402221 = CYLINDRICAL_SURFACE('',#402222,0.249998959685); +#402222 = AXIS2_PLACEMENT_3D('',#402223,#402224,#402225); +#402223 = CARTESIAN_POINT('',(129.80000104031,-105.9750010403,0.)); +#402224 = DIRECTION('',(-0.,-0.,1.)); +#402225 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#402226 = ADVANCED_FACE('',(#402227),#402252,.F.); +#402227 = FACE_BOUND('',#402228,.F.); +#402228 = EDGE_LOOP('',(#402229,#402230,#402238,#402246)); +#402229 = ORIENTED_EDGE('',*,*,#402207,.T.); +#402230 = ORIENTED_EDGE('',*,*,#402231,.T.); +#402231 = EDGE_CURVE('',#402199,#402232,#402234,.T.); +#402232 = VERTEX_POINT('',#402233); +#402233 = CARTESIAN_POINT('',(129.3,-106.225,-4.E-02)); +#402234 = LINE('',#402235,#402236); +#402235 = CARTESIAN_POINT('',(129.8,-106.225,-4.E-02)); +#402236 = VECTOR('',#402237,1.); +#402237 = DIRECTION('',(-1.,0.,0.)); +#402238 = ORIENTED_EDGE('',*,*,#402239,.F.); +#402239 = EDGE_CURVE('',#402240,#402232,#402242,.T.); +#402240 = VERTEX_POINT('',#402241); +#402241 = CARTESIAN_POINT('',(129.3,-106.225,0.)); +#402242 = LINE('',#402243,#402244); +#402243 = CARTESIAN_POINT('',(129.3,-106.225,0.)); +#402244 = VECTOR('',#402245,1.); +#402245 = DIRECTION('',(0.,0.,-1.)); +#402246 = ORIENTED_EDGE('',*,*,#402247,.F.); +#402247 = EDGE_CURVE('',#402208,#402240,#402248,.T.); +#402248 = LINE('',#402249,#402250); +#402249 = CARTESIAN_POINT('',(129.8,-106.225,0.)); +#402250 = VECTOR('',#402251,1.); +#402251 = DIRECTION('',(-1.,0.,0.)); +#402252 = PLANE('',#402253); +#402253 = AXIS2_PLACEMENT_3D('',#402254,#402255,#402256); +#402254 = CARTESIAN_POINT('',(129.8,-106.225,0.)); +#402255 = DIRECTION('',(0.,1.,0.)); +#402256 = DIRECTION('',(-1.,0.,0.)); +#402257 = ADVANCED_FACE('',(#402258),#402285,.T.); +#402258 = FACE_BOUND('',#402259,.F.); +#402259 = EDGE_LOOP('',(#402260,#402261,#402270,#402278)); +#402260 = ORIENTED_EDGE('',*,*,#402239,.T.); +#402261 = ORIENTED_EDGE('',*,*,#402262,.T.); +#402262 = EDGE_CURVE('',#402232,#402263,#402265,.T.); +#402263 = VERTEX_POINT('',#402264); +#402264 = CARTESIAN_POINT('',(129.05,-105.975,-4.E-02)); +#402265 = CIRCLE('',#402266,0.249998959685); +#402266 = AXIS2_PLACEMENT_3D('',#402267,#402268,#402269); +#402267 = CARTESIAN_POINT('',(129.29999895968,-105.9750010403,-4.E-02)); +#402268 = DIRECTION('',(0.,0.,-1.)); +#402269 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#402270 = ORIENTED_EDGE('',*,*,#402271,.F.); +#402271 = EDGE_CURVE('',#402272,#402263,#402274,.T.); +#402272 = VERTEX_POINT('',#402273); +#402273 = CARTESIAN_POINT('',(129.05,-105.975,0.)); +#402274 = LINE('',#402275,#402276); +#402275 = CARTESIAN_POINT('',(129.05,-105.975,0.)); +#402276 = VECTOR('',#402277,1.); +#402277 = DIRECTION('',(0.,0.,-1.)); +#402278 = ORIENTED_EDGE('',*,*,#402279,.F.); +#402279 = EDGE_CURVE('',#402240,#402272,#402280,.T.); +#402280 = CIRCLE('',#402281,0.249998959685); +#402281 = AXIS2_PLACEMENT_3D('',#402282,#402283,#402284); +#402282 = CARTESIAN_POINT('',(129.29999895968,-105.9750010403,0.)); +#402283 = DIRECTION('',(0.,0.,-1.)); +#402284 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#402285 = CYLINDRICAL_SURFACE('',#402286,0.249998959685); +#402286 = AXIS2_PLACEMENT_3D('',#402287,#402288,#402289); +#402287 = CARTESIAN_POINT('',(129.29999895968,-105.9750010403,0.)); +#402288 = DIRECTION('',(-0.,-0.,1.)); +#402289 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#402290 = ADVANCED_FACE('',(#402291),#402307,.F.); +#402291 = FACE_BOUND('',#402292,.F.); +#402292 = EDGE_LOOP('',(#402293,#402294,#402300,#402301)); +#402293 = ORIENTED_EDGE('',*,*,#402271,.T.); +#402294 = ORIENTED_EDGE('',*,*,#402295,.T.); +#402295 = EDGE_CURVE('',#402263,#402063,#402296,.T.); +#402296 = LINE('',#402297,#402298); +#402297 = CARTESIAN_POINT('',(129.05,-105.975,-4.E-02)); +#402298 = VECTOR('',#402299,1.); +#402299 = DIRECTION('',(0.,1.,0.)); +#402300 = ORIENTED_EDGE('',*,*,#402060,.F.); +#402301 = ORIENTED_EDGE('',*,*,#402302,.F.); +#402302 = EDGE_CURVE('',#402272,#402061,#402303,.T.); +#402303 = LINE('',#402304,#402305); +#402304 = CARTESIAN_POINT('',(129.05,-105.975,0.)); +#402305 = VECTOR('',#402306,1.); +#402306 = DIRECTION('',(0.,1.,0.)); +#402307 = PLANE('',#402308); +#402308 = AXIS2_PLACEMENT_3D('',#402309,#402310,#402311); +#402309 = CARTESIAN_POINT('',(129.05,-105.975,0.)); +#402310 = DIRECTION('',(1.,-0.,0.)); +#402311 = DIRECTION('',(0.,1.,0.)); +#402312 = ADVANCED_FACE('',(#402313),#402323,.F.); +#402313 = FACE_BOUND('',#402314,.F.); +#402314 = EDGE_LOOP('',(#402315,#402316,#402317,#402318,#402319,#402320, + #402321,#402322)); +#402315 = ORIENTED_EDGE('',*,*,#402087,.T.); +#402316 = ORIENTED_EDGE('',*,*,#402119,.T.); +#402317 = ORIENTED_EDGE('',*,*,#402151,.T.); +#402318 = ORIENTED_EDGE('',*,*,#402183,.T.); +#402319 = ORIENTED_EDGE('',*,*,#402215,.T.); +#402320 = ORIENTED_EDGE('',*,*,#402247,.T.); +#402321 = ORIENTED_EDGE('',*,*,#402279,.T.); +#402322 = ORIENTED_EDGE('',*,*,#402302,.T.); +#402323 = PLANE('',#402324); +#402324 = AXIS2_PLACEMENT_3D('',#402325,#402326,#402327); +#402325 = CARTESIAN_POINT('',(0.,0.,0.)); +#402326 = DIRECTION('',(-0.,-0.,-1.)); +#402327 = DIRECTION('',(-1.,0.,0.)); +#402328 = ADVANCED_FACE('',(#402329),#402339,.T.); +#402329 = FACE_BOUND('',#402330,.T.); +#402330 = EDGE_LOOP('',(#402331,#402332,#402333,#402334,#402335,#402336, + #402337,#402338)); +#402331 = ORIENTED_EDGE('',*,*,#402070,.T.); +#402332 = ORIENTED_EDGE('',*,*,#402103,.T.); +#402333 = ORIENTED_EDGE('',*,*,#402134,.T.); +#402334 = ORIENTED_EDGE('',*,*,#402167,.T.); +#402335 = ORIENTED_EDGE('',*,*,#402198,.T.); +#402336 = ORIENTED_EDGE('',*,*,#402231,.T.); +#402337 = ORIENTED_EDGE('',*,*,#402262,.T.); +#402338 = ORIENTED_EDGE('',*,*,#402295,.T.); +#402339 = PLANE('',#402340); +#402340 = AXIS2_PLACEMENT_3D('',#402341,#402342,#402343); +#402341 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#402342 = DIRECTION('',(-0.,-0.,-1.)); +#402343 = DIRECTION('',(-1.,0.,0.)); +#402344 = MANIFOLD_SOLID_BREP('',#402345); +#402345 = CLOSED_SHELL('',(#402346,#402388,#402419,#402452,#402483, + #402516,#402547,#402580,#402602,#402618)); +#402346 = ADVANCED_FACE('',(#402347),#402383,.T.); +#402347 = FACE_BOUND('',#402348,.F.); +#402348 = EDGE_LOOP('',(#402349,#402359,#402368,#402376)); +#402349 = ORIENTED_EDGE('',*,*,#402350,.T.); +#402350 = EDGE_CURVE('',#402351,#402353,#402355,.T.); +#402351 = VERTEX_POINT('',#402352); +#402352 = CARTESIAN_POINT('',(146.14,-119.66,0.)); +#402353 = VERTEX_POINT('',#402354); +#402354 = CARTESIAN_POINT('',(146.14,-119.66,-4.E-02)); +#402355 = LINE('',#402356,#402357); +#402356 = CARTESIAN_POINT('',(146.14,-119.66,0.)); +#402357 = VECTOR('',#402358,1.); +#402358 = DIRECTION('',(0.,0.,-1.)); +#402359 = ORIENTED_EDGE('',*,*,#402360,.T.); +#402360 = EDGE_CURVE('',#402353,#402361,#402363,.T.); +#402361 = VERTEX_POINT('',#402362); +#402362 = CARTESIAN_POINT('',(146.28,-119.52,-4.E-02)); +#402363 = CIRCLE('',#402364,0.139999827125); +#402364 = AXIS2_PLACEMENT_3D('',#402365,#402366,#402367); +#402365 = CARTESIAN_POINT('',(146.27999982712,-119.6599998271,-4.E-02)); +#402366 = DIRECTION('',(0.,0.,-1.)); +#402367 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402368 = ORIENTED_EDGE('',*,*,#402369,.F.); +#402369 = EDGE_CURVE('',#402370,#402361,#402372,.T.); +#402370 = VERTEX_POINT('',#402371); +#402371 = CARTESIAN_POINT('',(146.28,-119.52,0.)); +#402372 = LINE('',#402373,#402374); +#402373 = CARTESIAN_POINT('',(146.28,-119.52,0.)); +#402374 = VECTOR('',#402375,1.); +#402375 = DIRECTION('',(0.,0.,-1.)); +#402376 = ORIENTED_EDGE('',*,*,#402377,.F.); +#402377 = EDGE_CURVE('',#402351,#402370,#402378,.T.); +#402378 = CIRCLE('',#402379,0.139999827125); +#402379 = AXIS2_PLACEMENT_3D('',#402380,#402381,#402382); +#402380 = CARTESIAN_POINT('',(146.27999982712,-119.6599998271,0.)); +#402381 = DIRECTION('',(0.,0.,-1.)); +#402382 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402383 = CYLINDRICAL_SURFACE('',#402384,0.139999827125); +#402384 = AXIS2_PLACEMENT_3D('',#402385,#402386,#402387); +#402385 = CARTESIAN_POINT('',(146.27999982712,-119.6599998271,0.)); +#402386 = DIRECTION('',(-0.,-0.,1.)); +#402387 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402388 = ADVANCED_FACE('',(#402389),#402414,.F.); +#402389 = FACE_BOUND('',#402390,.F.); +#402390 = EDGE_LOOP('',(#402391,#402392,#402400,#402408)); +#402391 = ORIENTED_EDGE('',*,*,#402369,.T.); +#402392 = ORIENTED_EDGE('',*,*,#402393,.T.); +#402393 = EDGE_CURVE('',#402361,#402394,#402396,.T.); +#402394 = VERTEX_POINT('',#402395); +#402395 = CARTESIAN_POINT('',(146.62,-119.52,-4.E-02)); +#402396 = LINE('',#402397,#402398); +#402397 = CARTESIAN_POINT('',(146.28,-119.52,-4.E-02)); +#402398 = VECTOR('',#402399,1.); +#402399 = DIRECTION('',(1.,0.,0.)); +#402400 = ORIENTED_EDGE('',*,*,#402401,.F.); +#402401 = EDGE_CURVE('',#402402,#402394,#402404,.T.); +#402402 = VERTEX_POINT('',#402403); +#402403 = CARTESIAN_POINT('',(146.62,-119.52,0.)); +#402404 = LINE('',#402405,#402406); +#402405 = CARTESIAN_POINT('',(146.62,-119.52,0.)); +#402406 = VECTOR('',#402407,1.); +#402407 = DIRECTION('',(0.,0.,-1.)); +#402408 = ORIENTED_EDGE('',*,*,#402409,.F.); +#402409 = EDGE_CURVE('',#402370,#402402,#402410,.T.); +#402410 = LINE('',#402411,#402412); +#402411 = CARTESIAN_POINT('',(146.28,-119.52,0.)); +#402412 = VECTOR('',#402413,1.); +#402413 = DIRECTION('',(1.,0.,0.)); +#402414 = PLANE('',#402415); +#402415 = AXIS2_PLACEMENT_3D('',#402416,#402417,#402418); +#402416 = CARTESIAN_POINT('',(146.28,-119.52,0.)); +#402417 = DIRECTION('',(0.,-1.,0.)); +#402418 = DIRECTION('',(1.,0.,0.)); +#402419 = ADVANCED_FACE('',(#402420),#402447,.T.); +#402420 = FACE_BOUND('',#402421,.F.); +#402421 = EDGE_LOOP('',(#402422,#402423,#402432,#402440)); +#402422 = ORIENTED_EDGE('',*,*,#402401,.T.); +#402423 = ORIENTED_EDGE('',*,*,#402424,.T.); +#402424 = EDGE_CURVE('',#402394,#402425,#402427,.T.); +#402425 = VERTEX_POINT('',#402426); +#402426 = CARTESIAN_POINT('',(146.76,-119.66,-4.E-02)); +#402427 = CIRCLE('',#402428,0.139999827125); +#402428 = AXIS2_PLACEMENT_3D('',#402429,#402430,#402431); +#402429 = CARTESIAN_POINT('',(146.62000017287,-119.6599998271,-4.E-02)); +#402430 = DIRECTION('',(0.,0.,-1.)); +#402431 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#402432 = ORIENTED_EDGE('',*,*,#402433,.F.); +#402433 = EDGE_CURVE('',#402434,#402425,#402436,.T.); +#402434 = VERTEX_POINT('',#402435); +#402435 = CARTESIAN_POINT('',(146.76,-119.66,0.)); +#402436 = LINE('',#402437,#402438); +#402437 = CARTESIAN_POINT('',(146.76,-119.66,0.)); +#402438 = VECTOR('',#402439,1.); +#402439 = DIRECTION('',(0.,0.,-1.)); +#402440 = ORIENTED_EDGE('',*,*,#402441,.F.); +#402441 = EDGE_CURVE('',#402402,#402434,#402442,.T.); +#402442 = CIRCLE('',#402443,0.139999827125); +#402443 = AXIS2_PLACEMENT_3D('',#402444,#402445,#402446); +#402444 = CARTESIAN_POINT('',(146.62000017287,-119.6599998271,0.)); +#402445 = DIRECTION('',(0.,0.,-1.)); +#402446 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#402447 = CYLINDRICAL_SURFACE('',#402448,0.139999827125); +#402448 = AXIS2_PLACEMENT_3D('',#402449,#402450,#402451); +#402449 = CARTESIAN_POINT('',(146.62000017287,-119.6599998271,0.)); +#402450 = DIRECTION('',(-0.,-0.,1.)); +#402451 = DIRECTION('',(-1.234820451254E-06,0.999999999999,0.)); +#402452 = ADVANCED_FACE('',(#402453),#402478,.F.); +#402453 = FACE_BOUND('',#402454,.F.); +#402454 = EDGE_LOOP('',(#402455,#402456,#402464,#402472)); +#402455 = ORIENTED_EDGE('',*,*,#402433,.T.); +#402456 = ORIENTED_EDGE('',*,*,#402457,.T.); +#402457 = EDGE_CURVE('',#402425,#402458,#402460,.T.); +#402458 = VERTEX_POINT('',#402459); +#402459 = CARTESIAN_POINT('',(146.76,-119.94,-4.E-02)); +#402460 = LINE('',#402461,#402462); +#402461 = CARTESIAN_POINT('',(146.76,-119.66,-4.E-02)); +#402462 = VECTOR('',#402463,1.); +#402463 = DIRECTION('',(0.,-1.,0.)); +#402464 = ORIENTED_EDGE('',*,*,#402465,.F.); +#402465 = EDGE_CURVE('',#402466,#402458,#402468,.T.); +#402466 = VERTEX_POINT('',#402467); +#402467 = CARTESIAN_POINT('',(146.76,-119.94,0.)); +#402468 = LINE('',#402469,#402470); +#402469 = CARTESIAN_POINT('',(146.76,-119.94,0.)); +#402470 = VECTOR('',#402471,1.); +#402471 = DIRECTION('',(0.,0.,-1.)); +#402472 = ORIENTED_EDGE('',*,*,#402473,.F.); +#402473 = EDGE_CURVE('',#402434,#402466,#402474,.T.); +#402474 = LINE('',#402475,#402476); +#402475 = CARTESIAN_POINT('',(146.76,-119.66,0.)); +#402476 = VECTOR('',#402477,1.); +#402477 = DIRECTION('',(0.,-1.,0.)); +#402478 = PLANE('',#402479); +#402479 = AXIS2_PLACEMENT_3D('',#402480,#402481,#402482); +#402480 = CARTESIAN_POINT('',(146.76,-119.66,0.)); +#402481 = DIRECTION('',(-1.,-0.,-0.)); +#402482 = DIRECTION('',(0.,-1.,0.)); +#402483 = ADVANCED_FACE('',(#402484),#402511,.T.); +#402484 = FACE_BOUND('',#402485,.F.); +#402485 = EDGE_LOOP('',(#402486,#402487,#402496,#402504)); +#402486 = ORIENTED_EDGE('',*,*,#402465,.T.); +#402487 = ORIENTED_EDGE('',*,*,#402488,.T.); +#402488 = EDGE_CURVE('',#402458,#402489,#402491,.T.); +#402489 = VERTEX_POINT('',#402490); +#402490 = CARTESIAN_POINT('',(146.62,-120.08,-4.E-02)); +#402491 = CIRCLE('',#402492,0.139999827125); +#402492 = AXIS2_PLACEMENT_3D('',#402493,#402494,#402495); +#402493 = CARTESIAN_POINT('',(146.62000017287,-119.9400001728,-4.E-02)); +#402494 = DIRECTION('',(0.,0.,-1.)); +#402495 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#402496 = ORIENTED_EDGE('',*,*,#402497,.F.); +#402497 = EDGE_CURVE('',#402498,#402489,#402500,.T.); +#402498 = VERTEX_POINT('',#402499); +#402499 = CARTESIAN_POINT('',(146.62,-120.08,0.)); +#402500 = LINE('',#402501,#402502); +#402501 = CARTESIAN_POINT('',(146.62,-120.08,0.)); +#402502 = VECTOR('',#402503,1.); +#402503 = DIRECTION('',(0.,0.,-1.)); +#402504 = ORIENTED_EDGE('',*,*,#402505,.F.); +#402505 = EDGE_CURVE('',#402466,#402498,#402506,.T.); +#402506 = CIRCLE('',#402507,0.139999827125); +#402507 = AXIS2_PLACEMENT_3D('',#402508,#402509,#402510); +#402508 = CARTESIAN_POINT('',(146.62000017287,-119.9400001728,0.)); +#402509 = DIRECTION('',(0.,0.,-1.)); +#402510 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#402511 = CYLINDRICAL_SURFACE('',#402512,0.139999827125); +#402512 = AXIS2_PLACEMENT_3D('',#402513,#402514,#402515); +#402513 = CARTESIAN_POINT('',(146.62000017287,-119.9400001728,0.)); +#402514 = DIRECTION('',(-0.,-0.,1.)); +#402515 = DIRECTION('',(0.999999999999,1.23482055276E-06,0.)); +#402516 = ADVANCED_FACE('',(#402517),#402542,.F.); +#402517 = FACE_BOUND('',#402518,.F.); +#402518 = EDGE_LOOP('',(#402519,#402520,#402528,#402536)); +#402519 = ORIENTED_EDGE('',*,*,#402497,.T.); +#402520 = ORIENTED_EDGE('',*,*,#402521,.T.); +#402521 = EDGE_CURVE('',#402489,#402522,#402524,.T.); +#402522 = VERTEX_POINT('',#402523); +#402523 = CARTESIAN_POINT('',(146.28,-120.08,-4.E-02)); +#402524 = LINE('',#402525,#402526); +#402525 = CARTESIAN_POINT('',(146.62,-120.08,-4.E-02)); +#402526 = VECTOR('',#402527,1.); +#402527 = DIRECTION('',(-1.,0.,0.)); +#402528 = ORIENTED_EDGE('',*,*,#402529,.F.); +#402529 = EDGE_CURVE('',#402530,#402522,#402532,.T.); +#402530 = VERTEX_POINT('',#402531); +#402531 = CARTESIAN_POINT('',(146.28,-120.08,0.)); +#402532 = LINE('',#402533,#402534); +#402533 = CARTESIAN_POINT('',(146.28,-120.08,0.)); +#402534 = VECTOR('',#402535,1.); +#402535 = DIRECTION('',(0.,0.,-1.)); +#402536 = ORIENTED_EDGE('',*,*,#402537,.F.); +#402537 = EDGE_CURVE('',#402498,#402530,#402538,.T.); +#402538 = LINE('',#402539,#402540); +#402539 = CARTESIAN_POINT('',(146.62,-120.08,0.)); +#402540 = VECTOR('',#402541,1.); +#402541 = DIRECTION('',(-1.,0.,0.)); +#402542 = PLANE('',#402543); +#402543 = AXIS2_PLACEMENT_3D('',#402544,#402545,#402546); +#402544 = CARTESIAN_POINT('',(146.62,-120.08,0.)); +#402545 = DIRECTION('',(0.,1.,0.)); +#402546 = DIRECTION('',(-1.,0.,0.)); +#402547 = ADVANCED_FACE('',(#402548),#402575,.T.); +#402548 = FACE_BOUND('',#402549,.F.); +#402549 = EDGE_LOOP('',(#402550,#402551,#402560,#402568)); +#402550 = ORIENTED_EDGE('',*,*,#402529,.T.); +#402551 = ORIENTED_EDGE('',*,*,#402552,.T.); +#402552 = EDGE_CURVE('',#402522,#402553,#402555,.T.); +#402553 = VERTEX_POINT('',#402554); +#402554 = CARTESIAN_POINT('',(146.14,-119.94,-4.E-02)); +#402555 = CIRCLE('',#402556,0.139999827125); +#402556 = AXIS2_PLACEMENT_3D('',#402557,#402558,#402559); +#402557 = CARTESIAN_POINT('',(146.27999982712,-119.9400001728,-4.E-02)); +#402558 = DIRECTION('',(0.,0.,-1.)); +#402559 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402560 = ORIENTED_EDGE('',*,*,#402561,.F.); +#402561 = EDGE_CURVE('',#402562,#402553,#402564,.T.); +#402562 = VERTEX_POINT('',#402563); +#402563 = CARTESIAN_POINT('',(146.14,-119.94,0.)); +#402564 = LINE('',#402565,#402566); +#402565 = CARTESIAN_POINT('',(146.14,-119.94,0.)); +#402566 = VECTOR('',#402567,1.); +#402567 = DIRECTION('',(0.,0.,-1.)); +#402568 = ORIENTED_EDGE('',*,*,#402569,.F.); +#402569 = EDGE_CURVE('',#402530,#402562,#402570,.T.); +#402570 = CIRCLE('',#402571,0.139999827125); +#402571 = AXIS2_PLACEMENT_3D('',#402572,#402573,#402574); +#402572 = CARTESIAN_POINT('',(146.27999982712,-119.9400001728,0.)); +#402573 = DIRECTION('',(0.,0.,-1.)); +#402574 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402575 = CYLINDRICAL_SURFACE('',#402576,0.139999827125); +#402576 = AXIS2_PLACEMENT_3D('',#402577,#402578,#402579); +#402577 = CARTESIAN_POINT('',(146.27999982712,-119.9400001728,0.)); +#402578 = DIRECTION('',(-0.,-0.,1.)); +#402579 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402580 = ADVANCED_FACE('',(#402581),#402597,.F.); +#402581 = FACE_BOUND('',#402582,.F.); +#402582 = EDGE_LOOP('',(#402583,#402584,#402590,#402591)); +#402583 = ORIENTED_EDGE('',*,*,#402561,.T.); +#402584 = ORIENTED_EDGE('',*,*,#402585,.T.); +#402585 = EDGE_CURVE('',#402553,#402353,#402586,.T.); +#402586 = LINE('',#402587,#402588); +#402587 = CARTESIAN_POINT('',(146.14,-119.94,-4.E-02)); +#402588 = VECTOR('',#402589,1.); +#402589 = DIRECTION('',(0.,1.,0.)); +#402590 = ORIENTED_EDGE('',*,*,#402350,.F.); +#402591 = ORIENTED_EDGE('',*,*,#402592,.F.); +#402592 = EDGE_CURVE('',#402562,#402351,#402593,.T.); +#402593 = LINE('',#402594,#402595); +#402594 = CARTESIAN_POINT('',(146.14,-119.94,0.)); +#402595 = VECTOR('',#402596,1.); +#402596 = DIRECTION('',(0.,1.,0.)); +#402597 = PLANE('',#402598); +#402598 = AXIS2_PLACEMENT_3D('',#402599,#402600,#402601); +#402599 = CARTESIAN_POINT('',(146.14,-119.94,0.)); +#402600 = DIRECTION('',(1.,-0.,0.)); +#402601 = DIRECTION('',(0.,1.,0.)); +#402602 = ADVANCED_FACE('',(#402603),#402613,.F.); +#402603 = FACE_BOUND('',#402604,.F.); +#402604 = EDGE_LOOP('',(#402605,#402606,#402607,#402608,#402609,#402610, + #402611,#402612)); +#402605 = ORIENTED_EDGE('',*,*,#402377,.T.); +#402606 = ORIENTED_EDGE('',*,*,#402409,.T.); +#402607 = ORIENTED_EDGE('',*,*,#402441,.T.); +#402608 = ORIENTED_EDGE('',*,*,#402473,.T.); +#402609 = ORIENTED_EDGE('',*,*,#402505,.T.); +#402610 = ORIENTED_EDGE('',*,*,#402537,.T.); +#402611 = ORIENTED_EDGE('',*,*,#402569,.T.); +#402612 = ORIENTED_EDGE('',*,*,#402592,.T.); +#402613 = PLANE('',#402614); +#402614 = AXIS2_PLACEMENT_3D('',#402615,#402616,#402617); +#402615 = CARTESIAN_POINT('',(0.,0.,0.)); +#402616 = DIRECTION('',(-0.,-0.,-1.)); +#402617 = DIRECTION('',(-1.,0.,0.)); +#402618 = ADVANCED_FACE('',(#402619),#402629,.T.); +#402619 = FACE_BOUND('',#402620,.T.); +#402620 = EDGE_LOOP('',(#402621,#402622,#402623,#402624,#402625,#402626, + #402627,#402628)); +#402621 = ORIENTED_EDGE('',*,*,#402360,.T.); +#402622 = ORIENTED_EDGE('',*,*,#402393,.T.); +#402623 = ORIENTED_EDGE('',*,*,#402424,.T.); +#402624 = ORIENTED_EDGE('',*,*,#402457,.T.); +#402625 = ORIENTED_EDGE('',*,*,#402488,.T.); +#402626 = ORIENTED_EDGE('',*,*,#402521,.T.); +#402627 = ORIENTED_EDGE('',*,*,#402552,.T.); +#402628 = ORIENTED_EDGE('',*,*,#402585,.T.); +#402629 = PLANE('',#402630); +#402630 = AXIS2_PLACEMENT_3D('',#402631,#402632,#402633); +#402631 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#402632 = DIRECTION('',(-0.,-0.,-1.)); +#402633 = DIRECTION('',(-1.,0.,0.)); +#402634 = MANIFOLD_SOLID_BREP('',#402635); +#402635 = CLOSED_SHELL('',(#402636,#402678,#402709,#402742,#402773, + #402806,#402837,#402870,#402892,#402908)); +#402636 = ADVANCED_FACE('',(#402637),#402673,.T.); +#402637 = FACE_BOUND('',#402638,.F.); +#402638 = EDGE_LOOP('',(#402639,#402649,#402658,#402666)); +#402639 = ORIENTED_EDGE('',*,*,#402640,.T.); +#402640 = EDGE_CURVE('',#402641,#402643,#402645,.T.); +#402641 = VERTEX_POINT('',#402642); +#402642 = CARTESIAN_POINT('',(139.19,-72.38,0.)); +#402643 = VERTEX_POINT('',#402644); +#402644 = CARTESIAN_POINT('',(139.19,-72.38,-4.E-02)); +#402645 = LINE('',#402646,#402647); +#402646 = CARTESIAN_POINT('',(139.19,-72.38,0.)); +#402647 = VECTOR('',#402648,1.); +#402648 = DIRECTION('',(0.,0.,-1.)); +#402649 = ORIENTED_EDGE('',*,*,#402650,.T.); +#402650 = EDGE_CURVE('',#402643,#402651,#402653,.T.); +#402651 = VERTEX_POINT('',#402652); +#402652 = CARTESIAN_POINT('',(139.33,-72.24,-4.E-02)); +#402653 = CIRCLE('',#402654,0.139999827125); +#402654 = AXIS2_PLACEMENT_3D('',#402655,#402656,#402657); +#402655 = CARTESIAN_POINT('',(139.32999982712,-72.37999982712,-4.E-02)); +#402656 = DIRECTION('',(0.,0.,-1.)); +#402657 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402658 = ORIENTED_EDGE('',*,*,#402659,.F.); +#402659 = EDGE_CURVE('',#402660,#402651,#402662,.T.); +#402660 = VERTEX_POINT('',#402661); +#402661 = CARTESIAN_POINT('',(139.33,-72.24,0.)); +#402662 = LINE('',#402663,#402664); +#402663 = CARTESIAN_POINT('',(139.33,-72.24,0.)); +#402664 = VECTOR('',#402665,1.); +#402665 = DIRECTION('',(0.,0.,-1.)); +#402666 = ORIENTED_EDGE('',*,*,#402667,.F.); +#402667 = EDGE_CURVE('',#402641,#402660,#402668,.T.); +#402668 = CIRCLE('',#402669,0.139999827125); +#402669 = AXIS2_PLACEMENT_3D('',#402670,#402671,#402672); +#402670 = CARTESIAN_POINT('',(139.32999982712,-72.37999982712,0.)); +#402671 = DIRECTION('',(0.,0.,-1.)); +#402672 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402673 = CYLINDRICAL_SURFACE('',#402674,0.139999827125); +#402674 = AXIS2_PLACEMENT_3D('',#402675,#402676,#402677); +#402675 = CARTESIAN_POINT('',(139.32999982712,-72.37999982712,0.)); +#402676 = DIRECTION('',(-0.,-0.,1.)); +#402677 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#402678 = ADVANCED_FACE('',(#402679),#402704,.F.); +#402679 = FACE_BOUND('',#402680,.F.); +#402680 = EDGE_LOOP('',(#402681,#402682,#402690,#402698)); +#402681 = ORIENTED_EDGE('',*,*,#402659,.T.); +#402682 = ORIENTED_EDGE('',*,*,#402683,.T.); +#402683 = EDGE_CURVE('',#402651,#402684,#402686,.T.); +#402684 = VERTEX_POINT('',#402685); +#402685 = CARTESIAN_POINT('',(139.67,-72.24,-4.E-02)); +#402686 = LINE('',#402687,#402688); +#402687 = CARTESIAN_POINT('',(139.33,-72.24,-4.E-02)); +#402688 = VECTOR('',#402689,1.); +#402689 = DIRECTION('',(1.,0.,0.)); +#402690 = ORIENTED_EDGE('',*,*,#402691,.F.); +#402691 = EDGE_CURVE('',#402692,#402684,#402694,.T.); +#402692 = VERTEX_POINT('',#402693); +#402693 = CARTESIAN_POINT('',(139.67,-72.24,0.)); +#402694 = LINE('',#402695,#402696); +#402695 = CARTESIAN_POINT('',(139.67,-72.24,0.)); +#402696 = VECTOR('',#402697,1.); +#402697 = DIRECTION('',(0.,0.,-1.)); +#402698 = ORIENTED_EDGE('',*,*,#402699,.F.); +#402699 = EDGE_CURVE('',#402660,#402692,#402700,.T.); +#402700 = LINE('',#402701,#402702); +#402701 = CARTESIAN_POINT('',(139.33,-72.24,0.)); +#402702 = VECTOR('',#402703,1.); +#402703 = DIRECTION('',(1.,0.,0.)); +#402704 = PLANE('',#402705); +#402705 = AXIS2_PLACEMENT_3D('',#402706,#402707,#402708); +#402706 = CARTESIAN_POINT('',(139.33,-72.24,0.)); +#402707 = DIRECTION('',(0.,-1.,0.)); +#402708 = DIRECTION('',(1.,0.,0.)); +#402709 = ADVANCED_FACE('',(#402710),#402737,.T.); +#402710 = FACE_BOUND('',#402711,.F.); +#402711 = EDGE_LOOP('',(#402712,#402713,#402722,#402730)); +#402712 = ORIENTED_EDGE('',*,*,#402691,.T.); +#402713 = ORIENTED_EDGE('',*,*,#402714,.T.); +#402714 = EDGE_CURVE('',#402684,#402715,#402717,.T.); +#402715 = VERTEX_POINT('',#402716); +#402716 = CARTESIAN_POINT('',(139.81,-72.38,-4.E-02)); +#402717 = CIRCLE('',#402718,0.139999827125); +#402718 = AXIS2_PLACEMENT_3D('',#402719,#402720,#402721); +#402719 = CARTESIAN_POINT('',(139.67000017287,-72.37999982712,-4.E-02)); +#402720 = DIRECTION('',(0.,0.,-1.)); +#402721 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#402722 = ORIENTED_EDGE('',*,*,#402723,.F.); +#402723 = EDGE_CURVE('',#402724,#402715,#402726,.T.); +#402724 = VERTEX_POINT('',#402725); +#402725 = CARTESIAN_POINT('',(139.81,-72.38,0.)); +#402726 = LINE('',#402727,#402728); +#402727 = CARTESIAN_POINT('',(139.81,-72.38,0.)); +#402728 = VECTOR('',#402729,1.); +#402729 = DIRECTION('',(0.,0.,-1.)); +#402730 = ORIENTED_EDGE('',*,*,#402731,.F.); +#402731 = EDGE_CURVE('',#402692,#402724,#402732,.T.); +#402732 = CIRCLE('',#402733,0.139999827125); +#402733 = AXIS2_PLACEMENT_3D('',#402734,#402735,#402736); +#402734 = CARTESIAN_POINT('',(139.67000017287,-72.37999982712,0.)); +#402735 = DIRECTION('',(0.,0.,-1.)); +#402736 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#402737 = CYLINDRICAL_SURFACE('',#402738,0.139999827125); +#402738 = AXIS2_PLACEMENT_3D('',#402739,#402740,#402741); +#402739 = CARTESIAN_POINT('',(139.67000017287,-72.37999982712,0.)); +#402740 = DIRECTION('',(-0.,-0.,1.)); +#402741 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#402742 = ADVANCED_FACE('',(#402743),#402768,.F.); +#402743 = FACE_BOUND('',#402744,.F.); +#402744 = EDGE_LOOP('',(#402745,#402746,#402754,#402762)); +#402745 = ORIENTED_EDGE('',*,*,#402723,.T.); +#402746 = ORIENTED_EDGE('',*,*,#402747,.T.); +#402747 = EDGE_CURVE('',#402715,#402748,#402750,.T.); +#402748 = VERTEX_POINT('',#402749); +#402749 = CARTESIAN_POINT('',(139.81,-72.66,-4.E-02)); +#402750 = LINE('',#402751,#402752); +#402751 = CARTESIAN_POINT('',(139.81,-72.38,-4.E-02)); +#402752 = VECTOR('',#402753,1.); +#402753 = DIRECTION('',(0.,-1.,0.)); +#402754 = ORIENTED_EDGE('',*,*,#402755,.F.); +#402755 = EDGE_CURVE('',#402756,#402748,#402758,.T.); +#402756 = VERTEX_POINT('',#402757); +#402757 = CARTESIAN_POINT('',(139.81,-72.66,0.)); +#402758 = LINE('',#402759,#402760); +#402759 = CARTESIAN_POINT('',(139.81,-72.66,0.)); +#402760 = VECTOR('',#402761,1.); +#402761 = DIRECTION('',(0.,0.,-1.)); +#402762 = ORIENTED_EDGE('',*,*,#402763,.F.); +#402763 = EDGE_CURVE('',#402724,#402756,#402764,.T.); +#402764 = LINE('',#402765,#402766); +#402765 = CARTESIAN_POINT('',(139.81,-72.38,0.)); +#402766 = VECTOR('',#402767,1.); +#402767 = DIRECTION('',(0.,-1.,0.)); +#402768 = PLANE('',#402769); +#402769 = AXIS2_PLACEMENT_3D('',#402770,#402771,#402772); +#402770 = CARTESIAN_POINT('',(139.81,-72.38,0.)); +#402771 = DIRECTION('',(-1.,-0.,-0.)); +#402772 = DIRECTION('',(0.,-1.,0.)); +#402773 = ADVANCED_FACE('',(#402774),#402801,.T.); +#402774 = FACE_BOUND('',#402775,.F.); +#402775 = EDGE_LOOP('',(#402776,#402777,#402786,#402794)); +#402776 = ORIENTED_EDGE('',*,*,#402755,.T.); +#402777 = ORIENTED_EDGE('',*,*,#402778,.T.); +#402778 = EDGE_CURVE('',#402748,#402779,#402781,.T.); +#402779 = VERTEX_POINT('',#402780); +#402780 = CARTESIAN_POINT('',(139.67,-72.8,-4.E-02)); +#402781 = CIRCLE('',#402782,0.139999827125); +#402782 = AXIS2_PLACEMENT_3D('',#402783,#402784,#402785); +#402783 = CARTESIAN_POINT('',(139.67000017287,-72.66000017287,-4.E-02)); +#402784 = DIRECTION('',(0.,0.,-1.)); +#402785 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#402786 = ORIENTED_EDGE('',*,*,#402787,.F.); +#402787 = EDGE_CURVE('',#402788,#402779,#402790,.T.); +#402788 = VERTEX_POINT('',#402789); +#402789 = CARTESIAN_POINT('',(139.67,-72.8,0.)); +#402790 = LINE('',#402791,#402792); +#402791 = CARTESIAN_POINT('',(139.67,-72.8,0.)); +#402792 = VECTOR('',#402793,1.); +#402793 = DIRECTION('',(0.,0.,-1.)); +#402794 = ORIENTED_EDGE('',*,*,#402795,.F.); +#402795 = EDGE_CURVE('',#402756,#402788,#402796,.T.); +#402796 = CIRCLE('',#402797,0.139999827125); +#402797 = AXIS2_PLACEMENT_3D('',#402798,#402799,#402800); +#402798 = CARTESIAN_POINT('',(139.67000017287,-72.66000017287,0.)); +#402799 = DIRECTION('',(0.,0.,-1.)); +#402800 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#402801 = CYLINDRICAL_SURFACE('',#402802,0.139999827125); +#402802 = AXIS2_PLACEMENT_3D('',#402803,#402804,#402805); +#402803 = CARTESIAN_POINT('',(139.67000017287,-72.66000017287,0.)); +#402804 = DIRECTION('',(-0.,-0.,1.)); +#402805 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#402806 = ADVANCED_FACE('',(#402807),#402832,.F.); +#402807 = FACE_BOUND('',#402808,.F.); +#402808 = EDGE_LOOP('',(#402809,#402810,#402818,#402826)); +#402809 = ORIENTED_EDGE('',*,*,#402787,.T.); +#402810 = ORIENTED_EDGE('',*,*,#402811,.T.); +#402811 = EDGE_CURVE('',#402779,#402812,#402814,.T.); +#402812 = VERTEX_POINT('',#402813); +#402813 = CARTESIAN_POINT('',(139.33,-72.8,-4.E-02)); +#402814 = LINE('',#402815,#402816); +#402815 = CARTESIAN_POINT('',(139.67,-72.8,-4.E-02)); +#402816 = VECTOR('',#402817,1.); +#402817 = DIRECTION('',(-1.,0.,0.)); +#402818 = ORIENTED_EDGE('',*,*,#402819,.F.); +#402819 = EDGE_CURVE('',#402820,#402812,#402822,.T.); +#402820 = VERTEX_POINT('',#402821); +#402821 = CARTESIAN_POINT('',(139.33,-72.8,0.)); +#402822 = LINE('',#402823,#402824); +#402823 = CARTESIAN_POINT('',(139.33,-72.8,0.)); +#402824 = VECTOR('',#402825,1.); +#402825 = DIRECTION('',(0.,0.,-1.)); +#402826 = ORIENTED_EDGE('',*,*,#402827,.F.); +#402827 = EDGE_CURVE('',#402788,#402820,#402828,.T.); +#402828 = LINE('',#402829,#402830); +#402829 = CARTESIAN_POINT('',(139.67,-72.8,0.)); +#402830 = VECTOR('',#402831,1.); +#402831 = DIRECTION('',(-1.,0.,0.)); +#402832 = PLANE('',#402833); +#402833 = AXIS2_PLACEMENT_3D('',#402834,#402835,#402836); +#402834 = CARTESIAN_POINT('',(139.67,-72.8,0.)); +#402835 = DIRECTION('',(0.,1.,0.)); +#402836 = DIRECTION('',(-1.,0.,0.)); +#402837 = ADVANCED_FACE('',(#402838),#402865,.T.); +#402838 = FACE_BOUND('',#402839,.F.); +#402839 = EDGE_LOOP('',(#402840,#402841,#402850,#402858)); +#402840 = ORIENTED_EDGE('',*,*,#402819,.T.); +#402841 = ORIENTED_EDGE('',*,*,#402842,.T.); +#402842 = EDGE_CURVE('',#402812,#402843,#402845,.T.); +#402843 = VERTEX_POINT('',#402844); +#402844 = CARTESIAN_POINT('',(139.19,-72.66,-4.E-02)); +#402845 = CIRCLE('',#402846,0.139999827125); +#402846 = AXIS2_PLACEMENT_3D('',#402847,#402848,#402849); +#402847 = CARTESIAN_POINT('',(139.32999982712,-72.66000017287,-4.E-02)); +#402848 = DIRECTION('',(0.,0.,-1.)); +#402849 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402850 = ORIENTED_EDGE('',*,*,#402851,.F.); +#402851 = EDGE_CURVE('',#402852,#402843,#402854,.T.); +#402852 = VERTEX_POINT('',#402853); +#402853 = CARTESIAN_POINT('',(139.19,-72.66,0.)); +#402854 = LINE('',#402855,#402856); +#402855 = CARTESIAN_POINT('',(139.19,-72.66,0.)); +#402856 = VECTOR('',#402857,1.); +#402857 = DIRECTION('',(0.,0.,-1.)); +#402858 = ORIENTED_EDGE('',*,*,#402859,.F.); +#402859 = EDGE_CURVE('',#402820,#402852,#402860,.T.); +#402860 = CIRCLE('',#402861,0.139999827125); +#402861 = AXIS2_PLACEMENT_3D('',#402862,#402863,#402864); +#402862 = CARTESIAN_POINT('',(139.32999982712,-72.66000017287,0.)); +#402863 = DIRECTION('',(0.,0.,-1.)); +#402864 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402865 = CYLINDRICAL_SURFACE('',#402866,0.139999827125); +#402866 = AXIS2_PLACEMENT_3D('',#402867,#402868,#402869); +#402867 = CARTESIAN_POINT('',(139.32999982712,-72.66000017287,0.)); +#402868 = DIRECTION('',(-0.,-0.,1.)); +#402869 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#402870 = ADVANCED_FACE('',(#402871),#402887,.F.); +#402871 = FACE_BOUND('',#402872,.F.); +#402872 = EDGE_LOOP('',(#402873,#402874,#402880,#402881)); +#402873 = ORIENTED_EDGE('',*,*,#402851,.T.); +#402874 = ORIENTED_EDGE('',*,*,#402875,.T.); +#402875 = EDGE_CURVE('',#402843,#402643,#402876,.T.); +#402876 = LINE('',#402877,#402878); +#402877 = CARTESIAN_POINT('',(139.19,-72.66,-4.E-02)); +#402878 = VECTOR('',#402879,1.); +#402879 = DIRECTION('',(0.,1.,0.)); +#402880 = ORIENTED_EDGE('',*,*,#402640,.F.); +#402881 = ORIENTED_EDGE('',*,*,#402882,.F.); +#402882 = EDGE_CURVE('',#402852,#402641,#402883,.T.); +#402883 = LINE('',#402884,#402885); +#402884 = CARTESIAN_POINT('',(139.19,-72.66,0.)); +#402885 = VECTOR('',#402886,1.); +#402886 = DIRECTION('',(0.,1.,0.)); +#402887 = PLANE('',#402888); +#402888 = AXIS2_PLACEMENT_3D('',#402889,#402890,#402891); +#402889 = CARTESIAN_POINT('',(139.19,-72.66,0.)); +#402890 = DIRECTION('',(1.,-0.,0.)); +#402891 = DIRECTION('',(0.,1.,0.)); +#402892 = ADVANCED_FACE('',(#402893),#402903,.F.); +#402893 = FACE_BOUND('',#402894,.F.); +#402894 = EDGE_LOOP('',(#402895,#402896,#402897,#402898,#402899,#402900, + #402901,#402902)); +#402895 = ORIENTED_EDGE('',*,*,#402667,.T.); +#402896 = ORIENTED_EDGE('',*,*,#402699,.T.); +#402897 = ORIENTED_EDGE('',*,*,#402731,.T.); +#402898 = ORIENTED_EDGE('',*,*,#402763,.T.); +#402899 = ORIENTED_EDGE('',*,*,#402795,.T.); +#402900 = ORIENTED_EDGE('',*,*,#402827,.T.); +#402901 = ORIENTED_EDGE('',*,*,#402859,.T.); +#402902 = ORIENTED_EDGE('',*,*,#402882,.T.); +#402903 = PLANE('',#402904); +#402904 = AXIS2_PLACEMENT_3D('',#402905,#402906,#402907); +#402905 = CARTESIAN_POINT('',(0.,0.,0.)); +#402906 = DIRECTION('',(-0.,-0.,-1.)); +#402907 = DIRECTION('',(-1.,0.,0.)); +#402908 = ADVANCED_FACE('',(#402909),#402919,.T.); +#402909 = FACE_BOUND('',#402910,.T.); +#402910 = EDGE_LOOP('',(#402911,#402912,#402913,#402914,#402915,#402916, + #402917,#402918)); +#402911 = ORIENTED_EDGE('',*,*,#402650,.T.); +#402912 = ORIENTED_EDGE('',*,*,#402683,.T.); +#402913 = ORIENTED_EDGE('',*,*,#402714,.T.); +#402914 = ORIENTED_EDGE('',*,*,#402747,.T.); +#402915 = ORIENTED_EDGE('',*,*,#402778,.T.); +#402916 = ORIENTED_EDGE('',*,*,#402811,.T.); +#402917 = ORIENTED_EDGE('',*,*,#402842,.T.); +#402918 = ORIENTED_EDGE('',*,*,#402875,.T.); +#402919 = PLANE('',#402920); +#402920 = AXIS2_PLACEMENT_3D('',#402921,#402922,#402923); +#402921 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#402922 = DIRECTION('',(-0.,-0.,-1.)); +#402923 = DIRECTION('',(-1.,0.,0.)); +#402924 = MANIFOLD_SOLID_BREP('',#402925); +#402925 = CLOSED_SHELL('',(#402926,#402968,#402999,#403032,#403063, + #403096,#403127,#403160,#403182,#403198)); +#402926 = ADVANCED_FACE('',(#402927),#402963,.T.); +#402927 = FACE_BOUND('',#402928,.F.); +#402928 = EDGE_LOOP('',(#402929,#402939,#402948,#402956)); +#402929 = ORIENTED_EDGE('',*,*,#402930,.T.); +#402930 = EDGE_CURVE('',#402931,#402933,#402935,.T.); +#402931 = VERTEX_POINT('',#402932); +#402932 = CARTESIAN_POINT('',(147.7625,-119.85,0.)); +#402933 = VERTEX_POINT('',#402934); +#402934 = CARTESIAN_POINT('',(147.7625,-119.85,-4.E-02)); +#402935 = LINE('',#402936,#402937); +#402936 = CARTESIAN_POINT('',(147.7625,-119.85,0.)); +#402937 = VECTOR('',#402938,1.); +#402938 = DIRECTION('',(0.,0.,-1.)); +#402939 = ORIENTED_EDGE('',*,*,#402940,.T.); +#402940 = EDGE_CURVE('',#402933,#402941,#402943,.T.); +#402941 = VERTEX_POINT('',#402942); +#402942 = CARTESIAN_POINT('',(147.9125,-119.7,-4.E-02)); +#402943 = CIRCLE('',#402944,0.150000058649); +#402944 = AXIS2_PLACEMENT_3D('',#402945,#402946,#402947); +#402945 = CARTESIAN_POINT('',(147.91250005864,-119.8500000586,-4.E-02)); +#402946 = DIRECTION('',(0.,0.,-1.)); +#402947 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#402948 = ORIENTED_EDGE('',*,*,#402949,.F.); +#402949 = EDGE_CURVE('',#402950,#402941,#402952,.T.); +#402950 = VERTEX_POINT('',#402951); +#402951 = CARTESIAN_POINT('',(147.9125,-119.7,0.)); +#402952 = LINE('',#402953,#402954); +#402953 = CARTESIAN_POINT('',(147.9125,-119.7,0.)); +#402954 = VECTOR('',#402955,1.); +#402955 = DIRECTION('',(0.,0.,-1.)); +#402956 = ORIENTED_EDGE('',*,*,#402957,.F.); +#402957 = EDGE_CURVE('',#402931,#402950,#402958,.T.); +#402958 = CIRCLE('',#402959,0.150000058649); +#402959 = AXIS2_PLACEMENT_3D('',#402960,#402961,#402962); +#402960 = CARTESIAN_POINT('',(147.91250005864,-119.8500000586,0.)); +#402961 = DIRECTION('',(0.,0.,-1.)); +#402962 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#402963 = CYLINDRICAL_SURFACE('',#402964,0.150000058649); +#402964 = AXIS2_PLACEMENT_3D('',#402965,#402966,#402967); +#402965 = CARTESIAN_POINT('',(147.91250005864,-119.8500000586,0.)); +#402966 = DIRECTION('',(-0.,-0.,1.)); +#402967 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#402968 = ADVANCED_FACE('',(#402969),#402994,.F.); +#402969 = FACE_BOUND('',#402970,.F.); +#402970 = EDGE_LOOP('',(#402971,#402972,#402980,#402988)); +#402971 = ORIENTED_EDGE('',*,*,#402949,.T.); +#402972 = ORIENTED_EDGE('',*,*,#402973,.T.); +#402973 = EDGE_CURVE('',#402941,#402974,#402976,.T.); +#402974 = VERTEX_POINT('',#402975); +#402975 = CARTESIAN_POINT('',(149.0875,-119.7,-4.E-02)); +#402976 = LINE('',#402977,#402978); +#402977 = CARTESIAN_POINT('',(147.9125,-119.7,-4.E-02)); +#402978 = VECTOR('',#402979,1.); +#402979 = DIRECTION('',(1.,0.,0.)); +#402980 = ORIENTED_EDGE('',*,*,#402981,.F.); +#402981 = EDGE_CURVE('',#402982,#402974,#402984,.T.); +#402982 = VERTEX_POINT('',#402983); +#402983 = CARTESIAN_POINT('',(149.0875,-119.7,0.)); +#402984 = LINE('',#402985,#402986); +#402985 = CARTESIAN_POINT('',(149.0875,-119.7,0.)); +#402986 = VECTOR('',#402987,1.); +#402987 = DIRECTION('',(0.,0.,-1.)); +#402988 = ORIENTED_EDGE('',*,*,#402989,.F.); +#402989 = EDGE_CURVE('',#402950,#402982,#402990,.T.); +#402990 = LINE('',#402991,#402992); +#402991 = CARTESIAN_POINT('',(147.9125,-119.7,0.)); +#402992 = VECTOR('',#402993,1.); +#402993 = DIRECTION('',(1.,0.,0.)); +#402994 = PLANE('',#402995); +#402995 = AXIS2_PLACEMENT_3D('',#402996,#402997,#402998); +#402996 = CARTESIAN_POINT('',(147.9125,-119.7,0.)); +#402997 = DIRECTION('',(0.,-1.,0.)); +#402998 = DIRECTION('',(1.,0.,0.)); +#402999 = ADVANCED_FACE('',(#403000),#403027,.T.); +#403000 = FACE_BOUND('',#403001,.F.); +#403001 = EDGE_LOOP('',(#403002,#403003,#403012,#403020)); +#403002 = ORIENTED_EDGE('',*,*,#402981,.T.); +#403003 = ORIENTED_EDGE('',*,*,#403004,.T.); +#403004 = EDGE_CURVE('',#402974,#403005,#403007,.T.); +#403005 = VERTEX_POINT('',#403006); +#403006 = CARTESIAN_POINT('',(149.2375,-119.85,-4.E-02)); +#403007 = CIRCLE('',#403008,0.150000058649); +#403008 = AXIS2_PLACEMENT_3D('',#403009,#403010,#403011); +#403009 = CARTESIAN_POINT('',(149.08749994135,-119.8500000586,-4.E-02)); +#403010 = DIRECTION('',(0.,0.,-1.)); +#403011 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#403012 = ORIENTED_EDGE('',*,*,#403013,.F.); +#403013 = EDGE_CURVE('',#403014,#403005,#403016,.T.); +#403014 = VERTEX_POINT('',#403015); +#403015 = CARTESIAN_POINT('',(149.2375,-119.85,0.)); +#403016 = LINE('',#403017,#403018); +#403017 = CARTESIAN_POINT('',(149.2375,-119.85,0.)); +#403018 = VECTOR('',#403019,1.); +#403019 = DIRECTION('',(0.,0.,-1.)); +#403020 = ORIENTED_EDGE('',*,*,#403021,.F.); +#403021 = EDGE_CURVE('',#402982,#403014,#403022,.T.); +#403022 = CIRCLE('',#403023,0.150000058649); +#403023 = AXIS2_PLACEMENT_3D('',#403024,#403025,#403026); +#403024 = CARTESIAN_POINT('',(149.08749994135,-119.8500000586,0.)); +#403025 = DIRECTION('',(0.,0.,-1.)); +#403026 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#403027 = CYLINDRICAL_SURFACE('',#403028,0.150000058649); +#403028 = AXIS2_PLACEMENT_3D('',#403029,#403030,#403031); +#403029 = CARTESIAN_POINT('',(149.08749994135,-119.8500000586,0.)); +#403030 = DIRECTION('',(-0.,-0.,1.)); +#403031 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#403032 = ADVANCED_FACE('',(#403033),#403058,.F.); +#403033 = FACE_BOUND('',#403034,.F.); +#403034 = EDGE_LOOP('',(#403035,#403036,#403044,#403052)); +#403035 = ORIENTED_EDGE('',*,*,#403013,.T.); +#403036 = ORIENTED_EDGE('',*,*,#403037,.T.); +#403037 = EDGE_CURVE('',#403005,#403038,#403040,.T.); +#403038 = VERTEX_POINT('',#403039); +#403039 = CARTESIAN_POINT('',(149.2375,-120.15,-4.E-02)); +#403040 = LINE('',#403041,#403042); +#403041 = CARTESIAN_POINT('',(149.2375,-119.85,-4.E-02)); +#403042 = VECTOR('',#403043,1.); +#403043 = DIRECTION('',(0.,-1.,0.)); +#403044 = ORIENTED_EDGE('',*,*,#403045,.F.); +#403045 = EDGE_CURVE('',#403046,#403038,#403048,.T.); +#403046 = VERTEX_POINT('',#403047); +#403047 = CARTESIAN_POINT('',(149.2375,-120.15,0.)); +#403048 = LINE('',#403049,#403050); +#403049 = CARTESIAN_POINT('',(149.2375,-120.15,0.)); +#403050 = VECTOR('',#403051,1.); +#403051 = DIRECTION('',(0.,0.,-1.)); +#403052 = ORIENTED_EDGE('',*,*,#403053,.F.); +#403053 = EDGE_CURVE('',#403014,#403046,#403054,.T.); +#403054 = LINE('',#403055,#403056); +#403055 = CARTESIAN_POINT('',(149.2375,-119.85,0.)); +#403056 = VECTOR('',#403057,1.); +#403057 = DIRECTION('',(0.,-1.,0.)); +#403058 = PLANE('',#403059); +#403059 = AXIS2_PLACEMENT_3D('',#403060,#403061,#403062); +#403060 = CARTESIAN_POINT('',(149.2375,-119.85,0.)); +#403061 = DIRECTION('',(-1.,-0.,-0.)); +#403062 = DIRECTION('',(0.,-1.,0.)); +#403063 = ADVANCED_FACE('',(#403064),#403091,.T.); +#403064 = FACE_BOUND('',#403065,.F.); +#403065 = EDGE_LOOP('',(#403066,#403067,#403076,#403084)); +#403066 = ORIENTED_EDGE('',*,*,#403045,.T.); +#403067 = ORIENTED_EDGE('',*,*,#403068,.T.); +#403068 = EDGE_CURVE('',#403038,#403069,#403071,.T.); +#403069 = VERTEX_POINT('',#403070); +#403070 = CARTESIAN_POINT('',(149.0875,-120.3,-4.E-02)); +#403071 = CIRCLE('',#403072,0.150000058649); +#403072 = AXIS2_PLACEMENT_3D('',#403073,#403074,#403075); +#403073 = CARTESIAN_POINT('',(149.08749994135,-120.1499999413,-4.E-02)); +#403074 = DIRECTION('',(0.,0.,-1.)); +#403075 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#403076 = ORIENTED_EDGE('',*,*,#403077,.F.); +#403077 = EDGE_CURVE('',#403078,#403069,#403080,.T.); +#403078 = VERTEX_POINT('',#403079); +#403079 = CARTESIAN_POINT('',(149.0875,-120.3,0.)); +#403080 = LINE('',#403081,#403082); +#403081 = CARTESIAN_POINT('',(149.0875,-120.3,0.)); +#403082 = VECTOR('',#403083,1.); +#403083 = DIRECTION('',(0.,0.,-1.)); +#403084 = ORIENTED_EDGE('',*,*,#403085,.F.); +#403085 = EDGE_CURVE('',#403046,#403078,#403086,.T.); +#403086 = CIRCLE('',#403087,0.150000058649); +#403087 = AXIS2_PLACEMENT_3D('',#403088,#403089,#403090); +#403088 = CARTESIAN_POINT('',(149.08749994135,-120.1499999413,0.)); +#403089 = DIRECTION('',(0.,0.,-1.)); +#403090 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#403091 = CYLINDRICAL_SURFACE('',#403092,0.150000058649); +#403092 = AXIS2_PLACEMENT_3D('',#403093,#403094,#403095); +#403093 = CARTESIAN_POINT('',(149.08749994135,-120.1499999413,0.)); +#403094 = DIRECTION('',(-0.,-0.,1.)); +#403095 = DIRECTION('',(1.,-3.90995408976E-07,0.)); +#403096 = ADVANCED_FACE('',(#403097),#403122,.F.); +#403097 = FACE_BOUND('',#403098,.F.); +#403098 = EDGE_LOOP('',(#403099,#403100,#403108,#403116)); +#403099 = ORIENTED_EDGE('',*,*,#403077,.T.); +#403100 = ORIENTED_EDGE('',*,*,#403101,.T.); +#403101 = EDGE_CURVE('',#403069,#403102,#403104,.T.); +#403102 = VERTEX_POINT('',#403103); +#403103 = CARTESIAN_POINT('',(147.9125,-120.3,-4.E-02)); +#403104 = LINE('',#403105,#403106); +#403105 = CARTESIAN_POINT('',(149.0875,-120.3,-4.E-02)); +#403106 = VECTOR('',#403107,1.); +#403107 = DIRECTION('',(-1.,0.,0.)); +#403108 = ORIENTED_EDGE('',*,*,#403109,.F.); +#403109 = EDGE_CURVE('',#403110,#403102,#403112,.T.); +#403110 = VERTEX_POINT('',#403111); +#403111 = CARTESIAN_POINT('',(147.9125,-120.3,0.)); +#403112 = LINE('',#403113,#403114); +#403113 = CARTESIAN_POINT('',(147.9125,-120.3,0.)); +#403114 = VECTOR('',#403115,1.); +#403115 = DIRECTION('',(0.,0.,-1.)); +#403116 = ORIENTED_EDGE('',*,*,#403117,.F.); +#403117 = EDGE_CURVE('',#403078,#403110,#403118,.T.); +#403118 = LINE('',#403119,#403120); +#403119 = CARTESIAN_POINT('',(149.0875,-120.3,0.)); +#403120 = VECTOR('',#403121,1.); +#403121 = DIRECTION('',(-1.,0.,0.)); +#403122 = PLANE('',#403123); +#403123 = AXIS2_PLACEMENT_3D('',#403124,#403125,#403126); +#403124 = CARTESIAN_POINT('',(149.0875,-120.3,0.)); +#403125 = DIRECTION('',(0.,1.,0.)); +#403126 = DIRECTION('',(-1.,0.,0.)); +#403127 = ADVANCED_FACE('',(#403128),#403155,.T.); +#403128 = FACE_BOUND('',#403129,.F.); +#403129 = EDGE_LOOP('',(#403130,#403131,#403140,#403148)); +#403130 = ORIENTED_EDGE('',*,*,#403109,.T.); +#403131 = ORIENTED_EDGE('',*,*,#403132,.T.); +#403132 = EDGE_CURVE('',#403102,#403133,#403135,.T.); +#403133 = VERTEX_POINT('',#403134); +#403134 = CARTESIAN_POINT('',(147.7625,-120.15,-4.E-02)); +#403135 = CIRCLE('',#403136,0.150000058649); +#403136 = AXIS2_PLACEMENT_3D('',#403137,#403138,#403139); +#403137 = CARTESIAN_POINT('',(147.91250005864,-120.1499999413,-4.E-02)); +#403138 = DIRECTION('',(0.,0.,-1.)); +#403139 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#403140 = ORIENTED_EDGE('',*,*,#403141,.F.); +#403141 = EDGE_CURVE('',#403142,#403133,#403144,.T.); +#403142 = VERTEX_POINT('',#403143); +#403143 = CARTESIAN_POINT('',(147.7625,-120.15,0.)); +#403144 = LINE('',#403145,#403146); +#403145 = CARTESIAN_POINT('',(147.7625,-120.15,0.)); +#403146 = VECTOR('',#403147,1.); +#403147 = DIRECTION('',(0.,0.,-1.)); +#403148 = ORIENTED_EDGE('',*,*,#403149,.F.); +#403149 = EDGE_CURVE('',#403110,#403142,#403150,.T.); +#403150 = CIRCLE('',#403151,0.150000058649); +#403151 = AXIS2_PLACEMENT_3D('',#403152,#403153,#403154); +#403152 = CARTESIAN_POINT('',(147.91250005864,-120.1499999413,0.)); +#403153 = DIRECTION('',(0.,0.,-1.)); +#403154 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#403155 = CYLINDRICAL_SURFACE('',#403156,0.150000058649); +#403156 = AXIS2_PLACEMENT_3D('',#403157,#403158,#403159); +#403157 = CARTESIAN_POINT('',(147.91250005864,-120.1499999413,0.)); +#403158 = DIRECTION('',(-0.,-0.,1.)); +#403159 = DIRECTION('',(-3.90995219498E-07,-1.,-0.)); +#403160 = ADVANCED_FACE('',(#403161),#403177,.F.); +#403161 = FACE_BOUND('',#403162,.F.); +#403162 = EDGE_LOOP('',(#403163,#403164,#403170,#403171)); +#403163 = ORIENTED_EDGE('',*,*,#403141,.T.); +#403164 = ORIENTED_EDGE('',*,*,#403165,.T.); +#403165 = EDGE_CURVE('',#403133,#402933,#403166,.T.); +#403166 = LINE('',#403167,#403168); +#403167 = CARTESIAN_POINT('',(147.7625,-120.15,-4.E-02)); +#403168 = VECTOR('',#403169,1.); +#403169 = DIRECTION('',(0.,1.,0.)); +#403170 = ORIENTED_EDGE('',*,*,#402930,.F.); +#403171 = ORIENTED_EDGE('',*,*,#403172,.F.); +#403172 = EDGE_CURVE('',#403142,#402931,#403173,.T.); +#403173 = LINE('',#403174,#403175); +#403174 = CARTESIAN_POINT('',(147.7625,-120.15,0.)); +#403175 = VECTOR('',#403176,1.); +#403176 = DIRECTION('',(0.,1.,0.)); +#403177 = PLANE('',#403178); +#403178 = AXIS2_PLACEMENT_3D('',#403179,#403180,#403181); +#403179 = CARTESIAN_POINT('',(147.7625,-120.15,0.)); +#403180 = DIRECTION('',(1.,-0.,0.)); +#403181 = DIRECTION('',(0.,1.,0.)); +#403182 = ADVANCED_FACE('',(#403183),#403193,.F.); +#403183 = FACE_BOUND('',#403184,.F.); +#403184 = EDGE_LOOP('',(#403185,#403186,#403187,#403188,#403189,#403190, + #403191,#403192)); +#403185 = ORIENTED_EDGE('',*,*,#402957,.T.); +#403186 = ORIENTED_EDGE('',*,*,#402989,.T.); +#403187 = ORIENTED_EDGE('',*,*,#403021,.T.); +#403188 = ORIENTED_EDGE('',*,*,#403053,.T.); +#403189 = ORIENTED_EDGE('',*,*,#403085,.T.); +#403190 = ORIENTED_EDGE('',*,*,#403117,.T.); +#403191 = ORIENTED_EDGE('',*,*,#403149,.T.); +#403192 = ORIENTED_EDGE('',*,*,#403172,.T.); +#403193 = PLANE('',#403194); +#403194 = AXIS2_PLACEMENT_3D('',#403195,#403196,#403197); +#403195 = CARTESIAN_POINT('',(0.,0.,0.)); +#403196 = DIRECTION('',(-0.,-0.,-1.)); +#403197 = DIRECTION('',(-1.,0.,0.)); +#403198 = ADVANCED_FACE('',(#403199),#403209,.T.); +#403199 = FACE_BOUND('',#403200,.T.); +#403200 = EDGE_LOOP('',(#403201,#403202,#403203,#403204,#403205,#403206, + #403207,#403208)); +#403201 = ORIENTED_EDGE('',*,*,#402940,.T.); +#403202 = ORIENTED_EDGE('',*,*,#402973,.T.); +#403203 = ORIENTED_EDGE('',*,*,#403004,.T.); +#403204 = ORIENTED_EDGE('',*,*,#403037,.T.); +#403205 = ORIENTED_EDGE('',*,*,#403068,.T.); +#403206 = ORIENTED_EDGE('',*,*,#403101,.T.); +#403207 = ORIENTED_EDGE('',*,*,#403132,.T.); +#403208 = ORIENTED_EDGE('',*,*,#403165,.T.); +#403209 = PLANE('',#403210); +#403210 = AXIS2_PLACEMENT_3D('',#403211,#403212,#403213); +#403211 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#403212 = DIRECTION('',(-0.,-0.,-1.)); +#403213 = DIRECTION('',(-1.,0.,0.)); +#403214 = MANIFOLD_SOLID_BREP('',#403215); +#403215 = CLOSED_SHELL('',(#403216,#403258,#403289,#403322,#403353, + #403386,#403417,#403450,#403472,#403488)); +#403216 = ADVANCED_FACE('',(#403217),#403253,.T.); +#403217 = FACE_BOUND('',#403218,.F.); +#403218 = EDGE_LOOP('',(#403219,#403229,#403238,#403246)); +#403219 = ORIENTED_EDGE('',*,*,#403220,.T.); +#403220 = EDGE_CURVE('',#403221,#403223,#403225,.T.); +#403221 = VERTEX_POINT('',#403222); +#403222 = CARTESIAN_POINT('',(135.19,-117.82,0.)); +#403223 = VERTEX_POINT('',#403224); +#403224 = CARTESIAN_POINT('',(135.19,-117.82,-4.E-02)); +#403225 = LINE('',#403226,#403227); +#403226 = CARTESIAN_POINT('',(135.19,-117.82,0.)); +#403227 = VECTOR('',#403228,1.); +#403228 = DIRECTION('',(0.,0.,-1.)); +#403229 = ORIENTED_EDGE('',*,*,#403230,.T.); +#403230 = EDGE_CURVE('',#403223,#403231,#403233,.T.); +#403231 = VERTEX_POINT('',#403232); +#403232 = CARTESIAN_POINT('',(135.33,-117.68,-4.E-02)); +#403233 = CIRCLE('',#403234,0.139999827125); +#403234 = AXIS2_PLACEMENT_3D('',#403235,#403236,#403237); +#403235 = CARTESIAN_POINT('',(135.32999982712,-117.8199998271,-4.E-02)); +#403236 = DIRECTION('',(0.,0.,-1.)); +#403237 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#403238 = ORIENTED_EDGE('',*,*,#403239,.F.); +#403239 = EDGE_CURVE('',#403240,#403231,#403242,.T.); +#403240 = VERTEX_POINT('',#403241); +#403241 = CARTESIAN_POINT('',(135.33,-117.68,0.)); +#403242 = LINE('',#403243,#403244); +#403243 = CARTESIAN_POINT('',(135.33,-117.68,0.)); +#403244 = VECTOR('',#403245,1.); +#403245 = DIRECTION('',(0.,0.,-1.)); +#403246 = ORIENTED_EDGE('',*,*,#403247,.F.); +#403247 = EDGE_CURVE('',#403221,#403240,#403248,.T.); +#403248 = CIRCLE('',#403249,0.139999827125); +#403249 = AXIS2_PLACEMENT_3D('',#403250,#403251,#403252); +#403250 = CARTESIAN_POINT('',(135.32999982712,-117.8199998271,0.)); +#403251 = DIRECTION('',(0.,0.,-1.)); +#403252 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#403253 = CYLINDRICAL_SURFACE('',#403254,0.139999827125); +#403254 = AXIS2_PLACEMENT_3D('',#403255,#403256,#403257); +#403255 = CARTESIAN_POINT('',(135.32999982712,-117.8199998271,0.)); +#403256 = DIRECTION('',(-0.,-0.,1.)); +#403257 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#403258 = ADVANCED_FACE('',(#403259),#403284,.F.); +#403259 = FACE_BOUND('',#403260,.F.); +#403260 = EDGE_LOOP('',(#403261,#403262,#403270,#403278)); +#403261 = ORIENTED_EDGE('',*,*,#403239,.T.); +#403262 = ORIENTED_EDGE('',*,*,#403263,.T.); +#403263 = EDGE_CURVE('',#403231,#403264,#403266,.T.); +#403264 = VERTEX_POINT('',#403265); +#403265 = CARTESIAN_POINT('',(135.67,-117.68,-4.E-02)); +#403266 = LINE('',#403267,#403268); +#403267 = CARTESIAN_POINT('',(135.33,-117.68,-4.E-02)); +#403268 = VECTOR('',#403269,1.); +#403269 = DIRECTION('',(1.,0.,0.)); +#403270 = ORIENTED_EDGE('',*,*,#403271,.F.); +#403271 = EDGE_CURVE('',#403272,#403264,#403274,.T.); +#403272 = VERTEX_POINT('',#403273); +#403273 = CARTESIAN_POINT('',(135.67,-117.68,0.)); +#403274 = LINE('',#403275,#403276); +#403275 = CARTESIAN_POINT('',(135.67,-117.68,0.)); +#403276 = VECTOR('',#403277,1.); +#403277 = DIRECTION('',(0.,0.,-1.)); +#403278 = ORIENTED_EDGE('',*,*,#403279,.F.); +#403279 = EDGE_CURVE('',#403240,#403272,#403280,.T.); +#403280 = LINE('',#403281,#403282); +#403281 = CARTESIAN_POINT('',(135.33,-117.68,0.)); +#403282 = VECTOR('',#403283,1.); +#403283 = DIRECTION('',(1.,0.,0.)); +#403284 = PLANE('',#403285); +#403285 = AXIS2_PLACEMENT_3D('',#403286,#403287,#403288); +#403286 = CARTESIAN_POINT('',(135.33,-117.68,0.)); +#403287 = DIRECTION('',(0.,-1.,0.)); +#403288 = DIRECTION('',(1.,0.,0.)); +#403289 = ADVANCED_FACE('',(#403290),#403317,.T.); +#403290 = FACE_BOUND('',#403291,.F.); +#403291 = EDGE_LOOP('',(#403292,#403293,#403302,#403310)); +#403292 = ORIENTED_EDGE('',*,*,#403271,.T.); +#403293 = ORIENTED_EDGE('',*,*,#403294,.T.); +#403294 = EDGE_CURVE('',#403264,#403295,#403297,.T.); +#403295 = VERTEX_POINT('',#403296); +#403296 = CARTESIAN_POINT('',(135.81,-117.82,-4.E-02)); +#403297 = CIRCLE('',#403298,0.139999827125); +#403298 = AXIS2_PLACEMENT_3D('',#403299,#403300,#403301); +#403299 = CARTESIAN_POINT('',(135.67000017287,-117.8199998271,-4.E-02)); +#403300 = DIRECTION('',(0.,0.,-1.)); +#403301 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#403302 = ORIENTED_EDGE('',*,*,#403303,.F.); +#403303 = EDGE_CURVE('',#403304,#403295,#403306,.T.); +#403304 = VERTEX_POINT('',#403305); +#403305 = CARTESIAN_POINT('',(135.81,-117.82,0.)); +#403306 = LINE('',#403307,#403308); +#403307 = CARTESIAN_POINT('',(135.81,-117.82,0.)); +#403308 = VECTOR('',#403309,1.); +#403309 = DIRECTION('',(0.,0.,-1.)); +#403310 = ORIENTED_EDGE('',*,*,#403311,.F.); +#403311 = EDGE_CURVE('',#403272,#403304,#403312,.T.); +#403312 = CIRCLE('',#403313,0.139999827125); +#403313 = AXIS2_PLACEMENT_3D('',#403314,#403315,#403316); +#403314 = CARTESIAN_POINT('',(135.67000017287,-117.8199998271,0.)); +#403315 = DIRECTION('',(0.,0.,-1.)); +#403316 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#403317 = CYLINDRICAL_SURFACE('',#403318,0.139999827125); +#403318 = AXIS2_PLACEMENT_3D('',#403319,#403320,#403321); +#403319 = CARTESIAN_POINT('',(135.67000017287,-117.8199998271,0.)); +#403320 = DIRECTION('',(-0.,-0.,1.)); +#403321 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#403322 = ADVANCED_FACE('',(#403323),#403348,.F.); +#403323 = FACE_BOUND('',#403324,.F.); +#403324 = EDGE_LOOP('',(#403325,#403326,#403334,#403342)); +#403325 = ORIENTED_EDGE('',*,*,#403303,.T.); +#403326 = ORIENTED_EDGE('',*,*,#403327,.T.); +#403327 = EDGE_CURVE('',#403295,#403328,#403330,.T.); +#403328 = VERTEX_POINT('',#403329); +#403329 = CARTESIAN_POINT('',(135.81,-118.1,-4.E-02)); +#403330 = LINE('',#403331,#403332); +#403331 = CARTESIAN_POINT('',(135.81,-117.82,-4.E-02)); +#403332 = VECTOR('',#403333,1.); +#403333 = DIRECTION('',(0.,-1.,0.)); +#403334 = ORIENTED_EDGE('',*,*,#403335,.F.); +#403335 = EDGE_CURVE('',#403336,#403328,#403338,.T.); +#403336 = VERTEX_POINT('',#403337); +#403337 = CARTESIAN_POINT('',(135.81,-118.1,0.)); +#403338 = LINE('',#403339,#403340); +#403339 = CARTESIAN_POINT('',(135.81,-118.1,0.)); +#403340 = VECTOR('',#403341,1.); +#403341 = DIRECTION('',(0.,0.,-1.)); +#403342 = ORIENTED_EDGE('',*,*,#403343,.F.); +#403343 = EDGE_CURVE('',#403304,#403336,#403344,.T.); +#403344 = LINE('',#403345,#403346); +#403345 = CARTESIAN_POINT('',(135.81,-117.82,0.)); +#403346 = VECTOR('',#403347,1.); +#403347 = DIRECTION('',(0.,-1.,0.)); +#403348 = PLANE('',#403349); +#403349 = AXIS2_PLACEMENT_3D('',#403350,#403351,#403352); +#403350 = CARTESIAN_POINT('',(135.81,-117.82,0.)); +#403351 = DIRECTION('',(-1.,-0.,-0.)); +#403352 = DIRECTION('',(0.,-1.,0.)); +#403353 = ADVANCED_FACE('',(#403354),#403381,.T.); +#403354 = FACE_BOUND('',#403355,.F.); +#403355 = EDGE_LOOP('',(#403356,#403357,#403366,#403374)); +#403356 = ORIENTED_EDGE('',*,*,#403335,.T.); +#403357 = ORIENTED_EDGE('',*,*,#403358,.T.); +#403358 = EDGE_CURVE('',#403328,#403359,#403361,.T.); +#403359 = VERTEX_POINT('',#403360); +#403360 = CARTESIAN_POINT('',(135.67,-118.24,-4.E-02)); +#403361 = CIRCLE('',#403362,0.139999827125); +#403362 = AXIS2_PLACEMENT_3D('',#403363,#403364,#403365); +#403363 = CARTESIAN_POINT('',(135.67000017287,-118.1000001728,-4.E-02)); +#403364 = DIRECTION('',(0.,0.,-1.)); +#403365 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#403366 = ORIENTED_EDGE('',*,*,#403367,.F.); +#403367 = EDGE_CURVE('',#403368,#403359,#403370,.T.); +#403368 = VERTEX_POINT('',#403369); +#403369 = CARTESIAN_POINT('',(135.67,-118.24,0.)); +#403370 = LINE('',#403371,#403372); +#403371 = CARTESIAN_POINT('',(135.67,-118.24,0.)); +#403372 = VECTOR('',#403373,1.); +#403373 = DIRECTION('',(0.,0.,-1.)); +#403374 = ORIENTED_EDGE('',*,*,#403375,.F.); +#403375 = EDGE_CURVE('',#403336,#403368,#403376,.T.); +#403376 = CIRCLE('',#403377,0.139999827125); +#403377 = AXIS2_PLACEMENT_3D('',#403378,#403379,#403380); +#403378 = CARTESIAN_POINT('',(135.67000017287,-118.1000001728,0.)); +#403379 = DIRECTION('',(0.,0.,-1.)); +#403380 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#403381 = CYLINDRICAL_SURFACE('',#403382,0.139999827125); +#403382 = AXIS2_PLACEMENT_3D('',#403383,#403384,#403385); +#403383 = CARTESIAN_POINT('',(135.67000017287,-118.1000001728,0.)); +#403384 = DIRECTION('',(-0.,-0.,1.)); +#403385 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#403386 = ADVANCED_FACE('',(#403387),#403412,.F.); +#403387 = FACE_BOUND('',#403388,.F.); +#403388 = EDGE_LOOP('',(#403389,#403390,#403398,#403406)); +#403389 = ORIENTED_EDGE('',*,*,#403367,.T.); +#403390 = ORIENTED_EDGE('',*,*,#403391,.T.); +#403391 = EDGE_CURVE('',#403359,#403392,#403394,.T.); +#403392 = VERTEX_POINT('',#403393); +#403393 = CARTESIAN_POINT('',(135.33,-118.24,-4.E-02)); +#403394 = LINE('',#403395,#403396); +#403395 = CARTESIAN_POINT('',(135.67,-118.24,-4.E-02)); +#403396 = VECTOR('',#403397,1.); +#403397 = DIRECTION('',(-1.,0.,0.)); +#403398 = ORIENTED_EDGE('',*,*,#403399,.F.); +#403399 = EDGE_CURVE('',#403400,#403392,#403402,.T.); +#403400 = VERTEX_POINT('',#403401); +#403401 = CARTESIAN_POINT('',(135.33,-118.24,0.)); +#403402 = LINE('',#403403,#403404); +#403403 = CARTESIAN_POINT('',(135.33,-118.24,0.)); +#403404 = VECTOR('',#403405,1.); +#403405 = DIRECTION('',(0.,0.,-1.)); +#403406 = ORIENTED_EDGE('',*,*,#403407,.F.); +#403407 = EDGE_CURVE('',#403368,#403400,#403408,.T.); +#403408 = LINE('',#403409,#403410); +#403409 = CARTESIAN_POINT('',(135.67,-118.24,0.)); +#403410 = VECTOR('',#403411,1.); +#403411 = DIRECTION('',(-1.,0.,0.)); +#403412 = PLANE('',#403413); +#403413 = AXIS2_PLACEMENT_3D('',#403414,#403415,#403416); +#403414 = CARTESIAN_POINT('',(135.67,-118.24,0.)); +#403415 = DIRECTION('',(0.,1.,0.)); +#403416 = DIRECTION('',(-1.,0.,0.)); +#403417 = ADVANCED_FACE('',(#403418),#403445,.T.); +#403418 = FACE_BOUND('',#403419,.F.); +#403419 = EDGE_LOOP('',(#403420,#403421,#403430,#403438)); +#403420 = ORIENTED_EDGE('',*,*,#403399,.T.); +#403421 = ORIENTED_EDGE('',*,*,#403422,.T.); +#403422 = EDGE_CURVE('',#403392,#403423,#403425,.T.); +#403423 = VERTEX_POINT('',#403424); +#403424 = CARTESIAN_POINT('',(135.19,-118.1,-4.E-02)); +#403425 = CIRCLE('',#403426,0.139999827125); +#403426 = AXIS2_PLACEMENT_3D('',#403427,#403428,#403429); +#403427 = CARTESIAN_POINT('',(135.32999982712,-118.1000001728,-4.E-02)); +#403428 = DIRECTION('',(0.,0.,-1.)); +#403429 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#403430 = ORIENTED_EDGE('',*,*,#403431,.F.); +#403431 = EDGE_CURVE('',#403432,#403423,#403434,.T.); +#403432 = VERTEX_POINT('',#403433); +#403433 = CARTESIAN_POINT('',(135.19,-118.1,0.)); +#403434 = LINE('',#403435,#403436); +#403435 = CARTESIAN_POINT('',(135.19,-118.1,0.)); +#403436 = VECTOR('',#403437,1.); +#403437 = DIRECTION('',(0.,0.,-1.)); +#403438 = ORIENTED_EDGE('',*,*,#403439,.F.); +#403439 = EDGE_CURVE('',#403400,#403432,#403440,.T.); +#403440 = CIRCLE('',#403441,0.139999827125); +#403441 = AXIS2_PLACEMENT_3D('',#403442,#403443,#403444); +#403442 = CARTESIAN_POINT('',(135.32999982712,-118.1000001728,0.)); +#403443 = DIRECTION('',(0.,0.,-1.)); +#403444 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#403445 = CYLINDRICAL_SURFACE('',#403446,0.139999827125); +#403446 = AXIS2_PLACEMENT_3D('',#403447,#403448,#403449); +#403447 = CARTESIAN_POINT('',(135.32999982712,-118.1000001728,0.)); +#403448 = DIRECTION('',(-0.,-0.,1.)); +#403449 = DIRECTION('',(1.234820451253E-06,-0.999999999999,0.)); +#403450 = ADVANCED_FACE('',(#403451),#403467,.F.); +#403451 = FACE_BOUND('',#403452,.F.); +#403452 = EDGE_LOOP('',(#403453,#403454,#403460,#403461)); +#403453 = ORIENTED_EDGE('',*,*,#403431,.T.); +#403454 = ORIENTED_EDGE('',*,*,#403455,.T.); +#403455 = EDGE_CURVE('',#403423,#403223,#403456,.T.); +#403456 = LINE('',#403457,#403458); +#403457 = CARTESIAN_POINT('',(135.19,-118.1,-4.E-02)); +#403458 = VECTOR('',#403459,1.); +#403459 = DIRECTION('',(0.,1.,0.)); +#403460 = ORIENTED_EDGE('',*,*,#403220,.F.); +#403461 = ORIENTED_EDGE('',*,*,#403462,.F.); +#403462 = EDGE_CURVE('',#403432,#403221,#403463,.T.); +#403463 = LINE('',#403464,#403465); +#403464 = CARTESIAN_POINT('',(135.19,-118.1,0.)); +#403465 = VECTOR('',#403466,1.); +#403466 = DIRECTION('',(0.,1.,0.)); +#403467 = PLANE('',#403468); +#403468 = AXIS2_PLACEMENT_3D('',#403469,#403470,#403471); +#403469 = CARTESIAN_POINT('',(135.19,-118.1,0.)); +#403470 = DIRECTION('',(1.,-0.,0.)); +#403471 = DIRECTION('',(0.,1.,0.)); +#403472 = ADVANCED_FACE('',(#403473),#403483,.F.); +#403473 = FACE_BOUND('',#403474,.F.); +#403474 = EDGE_LOOP('',(#403475,#403476,#403477,#403478,#403479,#403480, + #403481,#403482)); +#403475 = ORIENTED_EDGE('',*,*,#403247,.T.); +#403476 = ORIENTED_EDGE('',*,*,#403279,.T.); +#403477 = ORIENTED_EDGE('',*,*,#403311,.T.); +#403478 = ORIENTED_EDGE('',*,*,#403343,.T.); +#403479 = ORIENTED_EDGE('',*,*,#403375,.T.); +#403480 = ORIENTED_EDGE('',*,*,#403407,.T.); +#403481 = ORIENTED_EDGE('',*,*,#403439,.T.); +#403482 = ORIENTED_EDGE('',*,*,#403462,.T.); +#403483 = PLANE('',#403484); +#403484 = AXIS2_PLACEMENT_3D('',#403485,#403486,#403487); +#403485 = CARTESIAN_POINT('',(0.,0.,0.)); +#403486 = DIRECTION('',(-0.,-0.,-1.)); +#403487 = DIRECTION('',(-1.,0.,0.)); +#403488 = ADVANCED_FACE('',(#403489),#403499,.T.); +#403489 = FACE_BOUND('',#403490,.T.); +#403490 = EDGE_LOOP('',(#403491,#403492,#403493,#403494,#403495,#403496, + #403497,#403498)); +#403491 = ORIENTED_EDGE('',*,*,#403230,.T.); +#403492 = ORIENTED_EDGE('',*,*,#403263,.T.); +#403493 = ORIENTED_EDGE('',*,*,#403294,.T.); +#403494 = ORIENTED_EDGE('',*,*,#403327,.T.); +#403495 = ORIENTED_EDGE('',*,*,#403358,.T.); +#403496 = ORIENTED_EDGE('',*,*,#403391,.T.); +#403497 = ORIENTED_EDGE('',*,*,#403422,.T.); +#403498 = ORIENTED_EDGE('',*,*,#403455,.T.); +#403499 = PLANE('',#403500); +#403500 = AXIS2_PLACEMENT_3D('',#403501,#403502,#403503); +#403501 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#403502 = DIRECTION('',(-0.,-0.,-1.)); +#403503 = DIRECTION('',(-1.,0.,0.)); +#403504 = MANIFOLD_SOLID_BREP('',#403505); +#403505 = CLOSED_SHELL('',(#403506,#403548,#403579,#403612,#403643, + #403676,#403707,#403740,#403762,#403778)); +#403506 = ADVANCED_FACE('',(#403507),#403543,.T.); +#403507 = FACE_BOUND('',#403508,.F.); +#403508 = EDGE_LOOP('',(#403509,#403519,#403528,#403536)); +#403509 = ORIENTED_EDGE('',*,*,#403510,.T.); +#403510 = EDGE_CURVE('',#403511,#403513,#403515,.T.); +#403511 = VERTEX_POINT('',#403512); +#403512 = CARTESIAN_POINT('',(136.925,-76.175,0.)); +#403513 = VERTEX_POINT('',#403514); +#403514 = CARTESIAN_POINT('',(136.925,-76.175,-4.E-02)); +#403515 = LINE('',#403516,#403517); +#403516 = CARTESIAN_POINT('',(136.925,-76.175,0.)); +#403517 = VECTOR('',#403518,1.); +#403518 = DIRECTION('',(0.,0.,-1.)); +#403519 = ORIENTED_EDGE('',*,*,#403520,.T.); +#403520 = EDGE_CURVE('',#403513,#403521,#403523,.T.); +#403521 = VERTEX_POINT('',#403522); +#403522 = CARTESIAN_POINT('',(137.15,-75.95,-4.E-02)); +#403523 = CIRCLE('',#403524,0.225000087974); +#403524 = AXIS2_PLACEMENT_3D('',#403525,#403526,#403527); +#403525 = CARTESIAN_POINT('',(137.15000008797,-76.17500008797,-4.E-02)); +#403526 = DIRECTION('',(0.,0.,-1.)); +#403527 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#403528 = ORIENTED_EDGE('',*,*,#403529,.F.); +#403529 = EDGE_CURVE('',#403530,#403521,#403532,.T.); +#403530 = VERTEX_POINT('',#403531); +#403531 = CARTESIAN_POINT('',(137.15,-75.95,0.)); +#403532 = LINE('',#403533,#403534); +#403533 = CARTESIAN_POINT('',(137.15,-75.95,0.)); +#403534 = VECTOR('',#403535,1.); +#403535 = DIRECTION('',(0.,0.,-1.)); +#403536 = ORIENTED_EDGE('',*,*,#403537,.F.); +#403537 = EDGE_CURVE('',#403511,#403530,#403538,.T.); +#403538 = CIRCLE('',#403539,0.225000087974); +#403539 = AXIS2_PLACEMENT_3D('',#403540,#403541,#403542); +#403540 = CARTESIAN_POINT('',(137.15000008797,-76.17500008797,0.)); +#403541 = DIRECTION('',(0.,0.,-1.)); +#403542 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#403543 = CYLINDRICAL_SURFACE('',#403544,0.225000087974); +#403544 = AXIS2_PLACEMENT_3D('',#403545,#403546,#403547); +#403545 = CARTESIAN_POINT('',(137.15000008797,-76.17500008797,0.)); +#403546 = DIRECTION('',(-0.,-0.,1.)); +#403547 = DIRECTION('',(-1.,3.909952826573E-07,0.)); +#403548 = ADVANCED_FACE('',(#403549),#403574,.F.); +#403549 = FACE_BOUND('',#403550,.F.); +#403550 = EDGE_LOOP('',(#403551,#403552,#403560,#403568)); +#403551 = ORIENTED_EDGE('',*,*,#403529,.T.); +#403552 = ORIENTED_EDGE('',*,*,#403553,.T.); +#403553 = EDGE_CURVE('',#403521,#403554,#403556,.T.); +#403554 = VERTEX_POINT('',#403555); +#403555 = CARTESIAN_POINT('',(137.65,-75.95,-4.E-02)); +#403556 = LINE('',#403557,#403558); +#403557 = CARTESIAN_POINT('',(137.15,-75.95,-4.E-02)); +#403558 = VECTOR('',#403559,1.); +#403559 = DIRECTION('',(1.,0.,0.)); +#403560 = ORIENTED_EDGE('',*,*,#403561,.F.); +#403561 = EDGE_CURVE('',#403562,#403554,#403564,.T.); +#403562 = VERTEX_POINT('',#403563); +#403563 = CARTESIAN_POINT('',(137.65,-75.95,0.)); +#403564 = LINE('',#403565,#403566); +#403565 = CARTESIAN_POINT('',(137.65,-75.95,0.)); +#403566 = VECTOR('',#403567,1.); +#403567 = DIRECTION('',(0.,0.,-1.)); +#403568 = ORIENTED_EDGE('',*,*,#403569,.F.); +#403569 = EDGE_CURVE('',#403530,#403562,#403570,.T.); +#403570 = LINE('',#403571,#403572); +#403571 = CARTESIAN_POINT('',(137.15,-75.95,0.)); +#403572 = VECTOR('',#403573,1.); +#403573 = DIRECTION('',(1.,0.,0.)); +#403574 = PLANE('',#403575); +#403575 = AXIS2_PLACEMENT_3D('',#403576,#403577,#403578); +#403576 = CARTESIAN_POINT('',(137.15,-75.95,0.)); +#403577 = DIRECTION('',(0.,-1.,0.)); +#403578 = DIRECTION('',(1.,0.,0.)); +#403579 = ADVANCED_FACE('',(#403580),#403607,.T.); +#403580 = FACE_BOUND('',#403581,.F.); +#403581 = EDGE_LOOP('',(#403582,#403583,#403592,#403600)); +#403582 = ORIENTED_EDGE('',*,*,#403561,.T.); +#403583 = ORIENTED_EDGE('',*,*,#403584,.T.); +#403584 = EDGE_CURVE('',#403554,#403585,#403587,.T.); +#403585 = VERTEX_POINT('',#403586); +#403586 = CARTESIAN_POINT('',(137.875,-76.175,-4.E-02)); +#403587 = CIRCLE('',#403588,0.225000087974); +#403588 = AXIS2_PLACEMENT_3D('',#403589,#403590,#403591); +#403589 = CARTESIAN_POINT('',(137.64999991202,-76.17500008797,-4.E-02)); +#403590 = DIRECTION('',(0.,0.,-1.)); +#403591 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#403592 = ORIENTED_EDGE('',*,*,#403593,.F.); +#403593 = EDGE_CURVE('',#403594,#403585,#403596,.T.); +#403594 = VERTEX_POINT('',#403595); +#403595 = CARTESIAN_POINT('',(137.875,-76.175,0.)); +#403596 = LINE('',#403597,#403598); +#403597 = CARTESIAN_POINT('',(137.875,-76.175,0.)); +#403598 = VECTOR('',#403599,1.); +#403599 = DIRECTION('',(0.,0.,-1.)); +#403600 = ORIENTED_EDGE('',*,*,#403601,.F.); +#403601 = EDGE_CURVE('',#403562,#403594,#403602,.T.); +#403602 = CIRCLE('',#403603,0.225000087974); +#403603 = AXIS2_PLACEMENT_3D('',#403604,#403605,#403606); +#403604 = CARTESIAN_POINT('',(137.64999991202,-76.17500008797,0.)); +#403605 = DIRECTION('',(0.,0.,-1.)); +#403606 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#403607 = CYLINDRICAL_SURFACE('',#403608,0.225000087974); +#403608 = AXIS2_PLACEMENT_3D('',#403609,#403610,#403611); +#403609 = CARTESIAN_POINT('',(137.64999991202,-76.17500008797,0.)); +#403610 = DIRECTION('',(-0.,-0.,1.)); +#403611 = DIRECTION('',(3.909952826573E-07,1.,0.)); +#403612 = ADVANCED_FACE('',(#403613),#403638,.F.); +#403613 = FACE_BOUND('',#403614,.F.); +#403614 = EDGE_LOOP('',(#403615,#403616,#403624,#403632)); +#403615 = ORIENTED_EDGE('',*,*,#403593,.T.); +#403616 = ORIENTED_EDGE('',*,*,#403617,.T.); +#403617 = EDGE_CURVE('',#403585,#403618,#403620,.T.); +#403618 = VERTEX_POINT('',#403619); +#403619 = CARTESIAN_POINT('',(137.875,-76.625,-4.E-02)); +#403620 = LINE('',#403621,#403622); +#403621 = CARTESIAN_POINT('',(137.875,-76.175,-4.E-02)); +#403622 = VECTOR('',#403623,1.); +#403623 = DIRECTION('',(0.,-1.,0.)); +#403624 = ORIENTED_EDGE('',*,*,#403625,.F.); +#403625 = EDGE_CURVE('',#403626,#403618,#403628,.T.); +#403626 = VERTEX_POINT('',#403627); +#403627 = CARTESIAN_POINT('',(137.875,-76.625,0.)); +#403628 = LINE('',#403629,#403630); +#403629 = CARTESIAN_POINT('',(137.875,-76.625,0.)); +#403630 = VECTOR('',#403631,1.); +#403631 = DIRECTION('',(0.,0.,-1.)); +#403632 = ORIENTED_EDGE('',*,*,#403633,.F.); +#403633 = EDGE_CURVE('',#403594,#403626,#403634,.T.); +#403634 = LINE('',#403635,#403636); +#403635 = CARTESIAN_POINT('',(137.875,-76.175,0.)); +#403636 = VECTOR('',#403637,1.); +#403637 = DIRECTION('',(0.,-1.,0.)); +#403638 = PLANE('',#403639); +#403639 = AXIS2_PLACEMENT_3D('',#403640,#403641,#403642); +#403640 = CARTESIAN_POINT('',(137.875,-76.175,0.)); +#403641 = DIRECTION('',(-1.,-0.,-0.)); +#403642 = DIRECTION('',(0.,-1.,0.)); +#403643 = ADVANCED_FACE('',(#403644),#403671,.T.); +#403644 = FACE_BOUND('',#403645,.F.); +#403645 = EDGE_LOOP('',(#403646,#403647,#403656,#403664)); +#403646 = ORIENTED_EDGE('',*,*,#403625,.T.); +#403647 = ORIENTED_EDGE('',*,*,#403648,.T.); +#403648 = EDGE_CURVE('',#403618,#403649,#403651,.T.); +#403649 = VERTEX_POINT('',#403650); +#403650 = CARTESIAN_POINT('',(137.65,-76.85,-4.E-02)); +#403651 = CIRCLE('',#403652,0.225000087974); +#403652 = AXIS2_PLACEMENT_3D('',#403653,#403654,#403655); +#403653 = CARTESIAN_POINT('',(137.64999991202,-76.62499991202,-4.E-02)); +#403654 = DIRECTION('',(0.,0.,-1.)); +#403655 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#403656 = ORIENTED_EDGE('',*,*,#403657,.F.); +#403657 = EDGE_CURVE('',#403658,#403649,#403660,.T.); +#403658 = VERTEX_POINT('',#403659); +#403659 = CARTESIAN_POINT('',(137.65,-76.85,0.)); +#403660 = LINE('',#403661,#403662); +#403661 = CARTESIAN_POINT('',(137.65,-76.85,0.)); +#403662 = VECTOR('',#403663,1.); +#403663 = DIRECTION('',(0.,0.,-1.)); +#403664 = ORIENTED_EDGE('',*,*,#403665,.F.); +#403665 = EDGE_CURVE('',#403626,#403658,#403666,.T.); +#403666 = CIRCLE('',#403667,0.225000087974); +#403667 = AXIS2_PLACEMENT_3D('',#403668,#403669,#403670); +#403668 = CARTESIAN_POINT('',(137.64999991202,-76.62499991202,0.)); +#403669 = DIRECTION('',(0.,0.,-1.)); +#403670 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#403671 = CYLINDRICAL_SURFACE('',#403672,0.225000087974); +#403672 = AXIS2_PLACEMENT_3D('',#403673,#403674,#403675); +#403673 = CARTESIAN_POINT('',(137.64999991202,-76.62499991202,0.)); +#403674 = DIRECTION('',(-0.,-0.,1.)); +#403675 = DIRECTION('',(1.,-3.909952826573E-07,0.)); +#403676 = ADVANCED_FACE('',(#403677),#403702,.F.); +#403677 = FACE_BOUND('',#403678,.F.); +#403678 = EDGE_LOOP('',(#403679,#403680,#403688,#403696)); +#403679 = ORIENTED_EDGE('',*,*,#403657,.T.); +#403680 = ORIENTED_EDGE('',*,*,#403681,.T.); +#403681 = EDGE_CURVE('',#403649,#403682,#403684,.T.); +#403682 = VERTEX_POINT('',#403683); +#403683 = CARTESIAN_POINT('',(137.15,-76.85,-4.E-02)); +#403684 = LINE('',#403685,#403686); +#403685 = CARTESIAN_POINT('',(137.65,-76.85,-4.E-02)); +#403686 = VECTOR('',#403687,1.); +#403687 = DIRECTION('',(-1.,0.,0.)); +#403688 = ORIENTED_EDGE('',*,*,#403689,.F.); +#403689 = EDGE_CURVE('',#403690,#403682,#403692,.T.); +#403690 = VERTEX_POINT('',#403691); +#403691 = CARTESIAN_POINT('',(137.15,-76.85,0.)); +#403692 = LINE('',#403693,#403694); +#403693 = CARTESIAN_POINT('',(137.15,-76.85,0.)); +#403694 = VECTOR('',#403695,1.); +#403695 = DIRECTION('',(0.,0.,-1.)); +#403696 = ORIENTED_EDGE('',*,*,#403697,.F.); +#403697 = EDGE_CURVE('',#403658,#403690,#403698,.T.); +#403698 = LINE('',#403699,#403700); +#403699 = CARTESIAN_POINT('',(137.65,-76.85,0.)); +#403700 = VECTOR('',#403701,1.); +#403701 = DIRECTION('',(-1.,0.,0.)); +#403702 = PLANE('',#403703); +#403703 = AXIS2_PLACEMENT_3D('',#403704,#403705,#403706); +#403704 = CARTESIAN_POINT('',(137.65,-76.85,0.)); +#403705 = DIRECTION('',(0.,1.,0.)); +#403706 = DIRECTION('',(-1.,0.,0.)); +#403707 = ADVANCED_FACE('',(#403708),#403735,.T.); +#403708 = FACE_BOUND('',#403709,.F.); +#403709 = EDGE_LOOP('',(#403710,#403711,#403720,#403728)); +#403710 = ORIENTED_EDGE('',*,*,#403689,.T.); +#403711 = ORIENTED_EDGE('',*,*,#403712,.T.); +#403712 = EDGE_CURVE('',#403682,#403713,#403715,.T.); +#403713 = VERTEX_POINT('',#403714); +#403714 = CARTESIAN_POINT('',(136.925,-76.625,-4.E-02)); +#403715 = CIRCLE('',#403716,0.225000087974); +#403716 = AXIS2_PLACEMENT_3D('',#403717,#403718,#403719); +#403717 = CARTESIAN_POINT('',(137.15000008797,-76.62499991202,-4.E-02)); +#403718 = DIRECTION('',(0.,0.,-1.)); +#403719 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#403720 = ORIENTED_EDGE('',*,*,#403721,.F.); +#403721 = EDGE_CURVE('',#403722,#403713,#403724,.T.); +#403722 = VERTEX_POINT('',#403723); +#403723 = CARTESIAN_POINT('',(136.925,-76.625,0.)); +#403724 = LINE('',#403725,#403726); +#403725 = CARTESIAN_POINT('',(136.925,-76.625,0.)); +#403726 = VECTOR('',#403727,1.); +#403727 = DIRECTION('',(0.,0.,-1.)); +#403728 = ORIENTED_EDGE('',*,*,#403729,.F.); +#403729 = EDGE_CURVE('',#403690,#403722,#403730,.T.); +#403730 = CIRCLE('',#403731,0.225000087974); +#403731 = AXIS2_PLACEMENT_3D('',#403732,#403733,#403734); +#403732 = CARTESIAN_POINT('',(137.15000008797,-76.62499991202,0.)); +#403733 = DIRECTION('',(0.,0.,-1.)); +#403734 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#403735 = CYLINDRICAL_SURFACE('',#403736,0.225000087974); +#403736 = AXIS2_PLACEMENT_3D('',#403737,#403738,#403739); +#403737 = CARTESIAN_POINT('',(137.15000008797,-76.62499991202,0.)); +#403738 = DIRECTION('',(-0.,-0.,1.)); +#403739 = DIRECTION('',(-3.909952826573E-07,-1.,-0.)); +#403740 = ADVANCED_FACE('',(#403741),#403757,.F.); +#403741 = FACE_BOUND('',#403742,.F.); +#403742 = EDGE_LOOP('',(#403743,#403744,#403750,#403751)); +#403743 = ORIENTED_EDGE('',*,*,#403721,.T.); +#403744 = ORIENTED_EDGE('',*,*,#403745,.T.); +#403745 = EDGE_CURVE('',#403713,#403513,#403746,.T.); +#403746 = LINE('',#403747,#403748); +#403747 = CARTESIAN_POINT('',(136.925,-76.625,-4.E-02)); +#403748 = VECTOR('',#403749,1.); +#403749 = DIRECTION('',(0.,1.,0.)); +#403750 = ORIENTED_EDGE('',*,*,#403510,.F.); +#403751 = ORIENTED_EDGE('',*,*,#403752,.F.); +#403752 = EDGE_CURVE('',#403722,#403511,#403753,.T.); +#403753 = LINE('',#403754,#403755); +#403754 = CARTESIAN_POINT('',(136.925,-76.625,0.)); +#403755 = VECTOR('',#403756,1.); +#403756 = DIRECTION('',(0.,1.,0.)); +#403757 = PLANE('',#403758); +#403758 = AXIS2_PLACEMENT_3D('',#403759,#403760,#403761); +#403759 = CARTESIAN_POINT('',(136.925,-76.625,0.)); +#403760 = DIRECTION('',(1.,-0.,0.)); +#403761 = DIRECTION('',(0.,1.,0.)); +#403762 = ADVANCED_FACE('',(#403763),#403773,.F.); +#403763 = FACE_BOUND('',#403764,.F.); +#403764 = EDGE_LOOP('',(#403765,#403766,#403767,#403768,#403769,#403770, + #403771,#403772)); +#403765 = ORIENTED_EDGE('',*,*,#403537,.T.); +#403766 = ORIENTED_EDGE('',*,*,#403569,.T.); +#403767 = ORIENTED_EDGE('',*,*,#403601,.T.); +#403768 = ORIENTED_EDGE('',*,*,#403633,.T.); +#403769 = ORIENTED_EDGE('',*,*,#403665,.T.); +#403770 = ORIENTED_EDGE('',*,*,#403697,.T.); +#403771 = ORIENTED_EDGE('',*,*,#403729,.T.); +#403772 = ORIENTED_EDGE('',*,*,#403752,.T.); +#403773 = PLANE('',#403774); +#403774 = AXIS2_PLACEMENT_3D('',#403775,#403776,#403777); +#403775 = CARTESIAN_POINT('',(0.,0.,0.)); +#403776 = DIRECTION('',(-0.,-0.,-1.)); +#403777 = DIRECTION('',(-1.,0.,0.)); +#403778 = ADVANCED_FACE('',(#403779),#403789,.T.); +#403779 = FACE_BOUND('',#403780,.T.); +#403780 = EDGE_LOOP('',(#403781,#403782,#403783,#403784,#403785,#403786, + #403787,#403788)); +#403781 = ORIENTED_EDGE('',*,*,#403520,.T.); +#403782 = ORIENTED_EDGE('',*,*,#403553,.T.); +#403783 = ORIENTED_EDGE('',*,*,#403584,.T.); +#403784 = ORIENTED_EDGE('',*,*,#403617,.T.); +#403785 = ORIENTED_EDGE('',*,*,#403648,.T.); +#403786 = ORIENTED_EDGE('',*,*,#403681,.T.); +#403787 = ORIENTED_EDGE('',*,*,#403712,.T.); +#403788 = ORIENTED_EDGE('',*,*,#403745,.T.); +#403789 = PLANE('',#403790); +#403790 = AXIS2_PLACEMENT_3D('',#403791,#403792,#403793); +#403791 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#403792 = DIRECTION('',(-0.,-0.,-1.)); +#403793 = DIRECTION('',(-1.,0.,0.)); +#403794 = MANIFOLD_SOLID_BREP('',#403795); +#403795 = CLOSED_SHELL('',(#403796,#403838,#403869,#403902,#403933, + #403966,#403997,#404030,#404052,#404068)); +#403796 = ADVANCED_FACE('',(#403797),#403833,.T.); +#403797 = FACE_BOUND('',#403798,.F.); +#403798 = EDGE_LOOP('',(#403799,#403809,#403818,#403826)); +#403799 = ORIENTED_EDGE('',*,*,#403800,.T.); +#403800 = EDGE_CURVE('',#403801,#403803,#403805,.T.); +#403801 = VERTEX_POINT('',#403802); +#403802 = CARTESIAN_POINT('',(137.9,-120.025,0.)); +#403803 = VERTEX_POINT('',#403804); +#403804 = CARTESIAN_POINT('',(137.9,-120.025,-4.E-02)); +#403805 = LINE('',#403806,#403807); +#403806 = CARTESIAN_POINT('',(137.9,-120.025,0.)); +#403807 = VECTOR('',#403808,1.); +#403808 = DIRECTION('',(0.,0.,-1.)); +#403809 = ORIENTED_EDGE('',*,*,#403810,.T.); +#403810 = EDGE_CURVE('',#403803,#403811,#403813,.T.); +#403811 = VERTEX_POINT('',#403812); +#403812 = CARTESIAN_POINT('',(138.15,-119.775,-4.E-02)); +#403813 = CIRCLE('',#403814,0.249998959685); +#403814 = AXIS2_PLACEMENT_3D('',#403815,#403816,#403817); +#403815 = CARTESIAN_POINT('',(138.14999895968,-120.0249989596,-4.E-02)); +#403816 = DIRECTION('',(0.,0.,-1.)); +#403817 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#403818 = ORIENTED_EDGE('',*,*,#403819,.F.); +#403819 = EDGE_CURVE('',#403820,#403811,#403822,.T.); +#403820 = VERTEX_POINT('',#403821); +#403821 = CARTESIAN_POINT('',(138.15,-119.775,0.)); +#403822 = LINE('',#403823,#403824); +#403823 = CARTESIAN_POINT('',(138.15,-119.775,0.)); +#403824 = VECTOR('',#403825,1.); +#403825 = DIRECTION('',(0.,0.,-1.)); +#403826 = ORIENTED_EDGE('',*,*,#403827,.F.); +#403827 = EDGE_CURVE('',#403801,#403820,#403828,.T.); +#403828 = CIRCLE('',#403829,0.249998959685); +#403829 = AXIS2_PLACEMENT_3D('',#403830,#403831,#403832); +#403830 = CARTESIAN_POINT('',(138.14999895968,-120.0249989596,0.)); +#403831 = DIRECTION('',(0.,0.,-1.)); +#403832 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#403833 = CYLINDRICAL_SURFACE('',#403834,0.249998959685); +#403834 = AXIS2_PLACEMENT_3D('',#403835,#403836,#403837); +#403835 = CARTESIAN_POINT('',(138.14999895968,-120.0249989596,0.)); +#403836 = DIRECTION('',(-0.,-0.,1.)); +#403837 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#403838 = ADVANCED_FACE('',(#403839),#403864,.F.); +#403839 = FACE_BOUND('',#403840,.F.); +#403840 = EDGE_LOOP('',(#403841,#403842,#403850,#403858)); +#403841 = ORIENTED_EDGE('',*,*,#403819,.T.); +#403842 = ORIENTED_EDGE('',*,*,#403843,.T.); +#403843 = EDGE_CURVE('',#403811,#403844,#403846,.T.); +#403844 = VERTEX_POINT('',#403845); +#403845 = CARTESIAN_POINT('',(138.65,-119.775,-4.E-02)); +#403846 = LINE('',#403847,#403848); +#403847 = CARTESIAN_POINT('',(138.15,-119.775,-4.E-02)); +#403848 = VECTOR('',#403849,1.); +#403849 = DIRECTION('',(1.,0.,0.)); +#403850 = ORIENTED_EDGE('',*,*,#403851,.F.); +#403851 = EDGE_CURVE('',#403852,#403844,#403854,.T.); +#403852 = VERTEX_POINT('',#403853); +#403853 = CARTESIAN_POINT('',(138.65,-119.775,0.)); +#403854 = LINE('',#403855,#403856); +#403855 = CARTESIAN_POINT('',(138.65,-119.775,0.)); +#403856 = VECTOR('',#403857,1.); +#403857 = DIRECTION('',(0.,0.,-1.)); +#403858 = ORIENTED_EDGE('',*,*,#403859,.F.); +#403859 = EDGE_CURVE('',#403820,#403852,#403860,.T.); +#403860 = LINE('',#403861,#403862); +#403861 = CARTESIAN_POINT('',(138.15,-119.775,0.)); +#403862 = VECTOR('',#403863,1.); +#403863 = DIRECTION('',(1.,0.,0.)); +#403864 = PLANE('',#403865); +#403865 = AXIS2_PLACEMENT_3D('',#403866,#403867,#403868); +#403866 = CARTESIAN_POINT('',(138.15,-119.775,0.)); +#403867 = DIRECTION('',(0.,-1.,0.)); +#403868 = DIRECTION('',(1.,0.,0.)); +#403869 = ADVANCED_FACE('',(#403870),#403897,.T.); +#403870 = FACE_BOUND('',#403871,.F.); +#403871 = EDGE_LOOP('',(#403872,#403873,#403882,#403890)); +#403872 = ORIENTED_EDGE('',*,*,#403851,.T.); +#403873 = ORIENTED_EDGE('',*,*,#403874,.T.); +#403874 = EDGE_CURVE('',#403844,#403875,#403877,.T.); +#403875 = VERTEX_POINT('',#403876); +#403876 = CARTESIAN_POINT('',(138.9,-120.025,-4.E-02)); +#403877 = CIRCLE('',#403878,0.249998959685); +#403878 = AXIS2_PLACEMENT_3D('',#403879,#403880,#403881); +#403879 = CARTESIAN_POINT('',(138.65000104031,-120.0249989596,-4.E-02)); +#403880 = DIRECTION('',(0.,0.,-1.)); +#403881 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#403882 = ORIENTED_EDGE('',*,*,#403883,.F.); +#403883 = EDGE_CURVE('',#403884,#403875,#403886,.T.); +#403884 = VERTEX_POINT('',#403885); +#403885 = CARTESIAN_POINT('',(138.9,-120.025,0.)); +#403886 = LINE('',#403887,#403888); +#403887 = CARTESIAN_POINT('',(138.9,-120.025,0.)); +#403888 = VECTOR('',#403889,1.); +#403889 = DIRECTION('',(0.,0.,-1.)); +#403890 = ORIENTED_EDGE('',*,*,#403891,.F.); +#403891 = EDGE_CURVE('',#403852,#403884,#403892,.T.); +#403892 = CIRCLE('',#403893,0.249998959685); +#403893 = AXIS2_PLACEMENT_3D('',#403894,#403895,#403896); +#403894 = CARTESIAN_POINT('',(138.65000104031,-120.0249989596,0.)); +#403895 = DIRECTION('',(0.,0.,-1.)); +#403896 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#403897 = CYLINDRICAL_SURFACE('',#403898,0.249998959685); +#403898 = AXIS2_PLACEMENT_3D('',#403899,#403900,#403901); +#403899 = CARTESIAN_POINT('',(138.65000104031,-120.0249989596,0.)); +#403900 = DIRECTION('',(-0.,-0.,1.)); +#403901 = DIRECTION('',(-4.161285723379E-06,0.999999999991,0.)); +#403902 = ADVANCED_FACE('',(#403903),#403928,.F.); +#403903 = FACE_BOUND('',#403904,.F.); +#403904 = EDGE_LOOP('',(#403905,#403906,#403914,#403922)); +#403905 = ORIENTED_EDGE('',*,*,#403883,.T.); +#403906 = ORIENTED_EDGE('',*,*,#403907,.T.); +#403907 = EDGE_CURVE('',#403875,#403908,#403910,.T.); +#403908 = VERTEX_POINT('',#403909); +#403909 = CARTESIAN_POINT('',(138.9,-120.975,-4.E-02)); +#403910 = LINE('',#403911,#403912); +#403911 = CARTESIAN_POINT('',(138.9,-120.025,-4.E-02)); +#403912 = VECTOR('',#403913,1.); +#403913 = DIRECTION('',(0.,-1.,0.)); +#403914 = ORIENTED_EDGE('',*,*,#403915,.F.); +#403915 = EDGE_CURVE('',#403916,#403908,#403918,.T.); +#403916 = VERTEX_POINT('',#403917); +#403917 = CARTESIAN_POINT('',(138.9,-120.975,0.)); +#403918 = LINE('',#403919,#403920); +#403919 = CARTESIAN_POINT('',(138.9,-120.975,0.)); +#403920 = VECTOR('',#403921,1.); +#403921 = DIRECTION('',(0.,0.,-1.)); +#403922 = ORIENTED_EDGE('',*,*,#403923,.F.); +#403923 = EDGE_CURVE('',#403884,#403916,#403924,.T.); +#403924 = LINE('',#403925,#403926); +#403925 = CARTESIAN_POINT('',(138.9,-120.025,0.)); +#403926 = VECTOR('',#403927,1.); +#403927 = DIRECTION('',(0.,-1.,0.)); +#403928 = PLANE('',#403929); +#403929 = AXIS2_PLACEMENT_3D('',#403930,#403931,#403932); +#403930 = CARTESIAN_POINT('',(138.9,-120.025,0.)); +#403931 = DIRECTION('',(-1.,-0.,-0.)); +#403932 = DIRECTION('',(0.,-1.,0.)); +#403933 = ADVANCED_FACE('',(#403934),#403961,.T.); +#403934 = FACE_BOUND('',#403935,.F.); +#403935 = EDGE_LOOP('',(#403936,#403937,#403946,#403954)); +#403936 = ORIENTED_EDGE('',*,*,#403915,.T.); +#403937 = ORIENTED_EDGE('',*,*,#403938,.T.); +#403938 = EDGE_CURVE('',#403908,#403939,#403941,.T.); +#403939 = VERTEX_POINT('',#403940); +#403940 = CARTESIAN_POINT('',(138.65,-121.225,-4.E-02)); +#403941 = CIRCLE('',#403942,0.249998959685); +#403942 = AXIS2_PLACEMENT_3D('',#403943,#403944,#403945); +#403943 = CARTESIAN_POINT('',(138.65000104031,-120.9750010403,-4.E-02)); +#403944 = DIRECTION('',(0.,0.,-1.)); +#403945 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#403946 = ORIENTED_EDGE('',*,*,#403947,.F.); +#403947 = EDGE_CURVE('',#403948,#403939,#403950,.T.); +#403948 = VERTEX_POINT('',#403949); +#403949 = CARTESIAN_POINT('',(138.65,-121.225,0.)); +#403950 = LINE('',#403951,#403952); +#403951 = CARTESIAN_POINT('',(138.65,-121.225,0.)); +#403952 = VECTOR('',#403953,1.); +#403953 = DIRECTION('',(0.,0.,-1.)); +#403954 = ORIENTED_EDGE('',*,*,#403955,.F.); +#403955 = EDGE_CURVE('',#403916,#403948,#403956,.T.); +#403956 = CIRCLE('',#403957,0.249998959685); +#403957 = AXIS2_PLACEMENT_3D('',#403958,#403959,#403960); +#403958 = CARTESIAN_POINT('',(138.65000104031,-120.9750010403,0.)); +#403959 = DIRECTION('',(0.,0.,-1.)); +#403960 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#403961 = CYLINDRICAL_SURFACE('',#403962,0.249998959685); +#403962 = AXIS2_PLACEMENT_3D('',#403963,#403964,#403965); +#403963 = CARTESIAN_POINT('',(138.65000104031,-120.9750010403,0.)); +#403964 = DIRECTION('',(-0.,-0.,1.)); +#403965 = DIRECTION('',(0.999999999991,4.161285780222E-06,0.)); +#403966 = ADVANCED_FACE('',(#403967),#403992,.F.); +#403967 = FACE_BOUND('',#403968,.F.); +#403968 = EDGE_LOOP('',(#403969,#403970,#403978,#403986)); +#403969 = ORIENTED_EDGE('',*,*,#403947,.T.); +#403970 = ORIENTED_EDGE('',*,*,#403971,.T.); +#403971 = EDGE_CURVE('',#403939,#403972,#403974,.T.); +#403972 = VERTEX_POINT('',#403973); +#403973 = CARTESIAN_POINT('',(138.15,-121.225,-4.E-02)); +#403974 = LINE('',#403975,#403976); +#403975 = CARTESIAN_POINT('',(138.65,-121.225,-4.E-02)); +#403976 = VECTOR('',#403977,1.); +#403977 = DIRECTION('',(-1.,0.,0.)); +#403978 = ORIENTED_EDGE('',*,*,#403979,.F.); +#403979 = EDGE_CURVE('',#403980,#403972,#403982,.T.); +#403980 = VERTEX_POINT('',#403981); +#403981 = CARTESIAN_POINT('',(138.15,-121.225,0.)); +#403982 = LINE('',#403983,#403984); +#403983 = CARTESIAN_POINT('',(138.15,-121.225,0.)); +#403984 = VECTOR('',#403985,1.); +#403985 = DIRECTION('',(0.,0.,-1.)); +#403986 = ORIENTED_EDGE('',*,*,#403987,.F.); +#403987 = EDGE_CURVE('',#403948,#403980,#403988,.T.); +#403988 = LINE('',#403989,#403990); +#403989 = CARTESIAN_POINT('',(138.65,-121.225,0.)); +#403990 = VECTOR('',#403991,1.); +#403991 = DIRECTION('',(-1.,0.,0.)); +#403992 = PLANE('',#403993); +#403993 = AXIS2_PLACEMENT_3D('',#403994,#403995,#403996); +#403994 = CARTESIAN_POINT('',(138.65,-121.225,0.)); +#403995 = DIRECTION('',(0.,1.,0.)); +#403996 = DIRECTION('',(-1.,0.,0.)); +#403997 = ADVANCED_FACE('',(#403998),#404025,.T.); +#403998 = FACE_BOUND('',#403999,.F.); +#403999 = EDGE_LOOP('',(#404000,#404001,#404010,#404018)); +#404000 = ORIENTED_EDGE('',*,*,#403979,.T.); +#404001 = ORIENTED_EDGE('',*,*,#404002,.T.); +#404002 = EDGE_CURVE('',#403972,#404003,#404005,.T.); +#404003 = VERTEX_POINT('',#404004); +#404004 = CARTESIAN_POINT('',(137.9,-120.975,-4.E-02)); +#404005 = CIRCLE('',#404006,0.249998959685); +#404006 = AXIS2_PLACEMENT_3D('',#404007,#404008,#404009); +#404007 = CARTESIAN_POINT('',(138.14999895968,-120.9750010403,-4.E-02)); +#404008 = DIRECTION('',(0.,0.,-1.)); +#404009 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#404010 = ORIENTED_EDGE('',*,*,#404011,.F.); +#404011 = EDGE_CURVE('',#404012,#404003,#404014,.T.); +#404012 = VERTEX_POINT('',#404013); +#404013 = CARTESIAN_POINT('',(137.9,-120.975,0.)); +#404014 = LINE('',#404015,#404016); +#404015 = CARTESIAN_POINT('',(137.9,-120.975,0.)); +#404016 = VECTOR('',#404017,1.); +#404017 = DIRECTION('',(0.,0.,-1.)); +#404018 = ORIENTED_EDGE('',*,*,#404019,.F.); +#404019 = EDGE_CURVE('',#403980,#404012,#404020,.T.); +#404020 = CIRCLE('',#404021,0.249998959685); +#404021 = AXIS2_PLACEMENT_3D('',#404022,#404023,#404024); +#404022 = CARTESIAN_POINT('',(138.14999895968,-120.9750010403,0.)); +#404023 = DIRECTION('',(0.,0.,-1.)); +#404024 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#404025 = CYLINDRICAL_SURFACE('',#404026,0.249998959685); +#404026 = AXIS2_PLACEMENT_3D('',#404027,#404028,#404029); +#404027 = CARTESIAN_POINT('',(138.14999895968,-120.9750010403,0.)); +#404028 = DIRECTION('',(-0.,-0.,1.)); +#404029 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#404030 = ADVANCED_FACE('',(#404031),#404047,.F.); +#404031 = FACE_BOUND('',#404032,.F.); +#404032 = EDGE_LOOP('',(#404033,#404034,#404040,#404041)); +#404033 = ORIENTED_EDGE('',*,*,#404011,.T.); +#404034 = ORIENTED_EDGE('',*,*,#404035,.T.); +#404035 = EDGE_CURVE('',#404003,#403803,#404036,.T.); +#404036 = LINE('',#404037,#404038); +#404037 = CARTESIAN_POINT('',(137.9,-120.975,-4.E-02)); +#404038 = VECTOR('',#404039,1.); +#404039 = DIRECTION('',(0.,1.,0.)); +#404040 = ORIENTED_EDGE('',*,*,#403800,.F.); +#404041 = ORIENTED_EDGE('',*,*,#404042,.F.); +#404042 = EDGE_CURVE('',#404012,#403801,#404043,.T.); +#404043 = LINE('',#404044,#404045); +#404044 = CARTESIAN_POINT('',(137.9,-120.975,0.)); +#404045 = VECTOR('',#404046,1.); +#404046 = DIRECTION('',(0.,1.,0.)); +#404047 = PLANE('',#404048); +#404048 = AXIS2_PLACEMENT_3D('',#404049,#404050,#404051); +#404049 = CARTESIAN_POINT('',(137.9,-120.975,0.)); +#404050 = DIRECTION('',(1.,-0.,0.)); +#404051 = DIRECTION('',(0.,1.,0.)); +#404052 = ADVANCED_FACE('',(#404053),#404063,.F.); +#404053 = FACE_BOUND('',#404054,.F.); +#404054 = EDGE_LOOP('',(#404055,#404056,#404057,#404058,#404059,#404060, + #404061,#404062)); +#404055 = ORIENTED_EDGE('',*,*,#403827,.T.); +#404056 = ORIENTED_EDGE('',*,*,#403859,.T.); +#404057 = ORIENTED_EDGE('',*,*,#403891,.T.); +#404058 = ORIENTED_EDGE('',*,*,#403923,.T.); +#404059 = ORIENTED_EDGE('',*,*,#403955,.T.); +#404060 = ORIENTED_EDGE('',*,*,#403987,.T.); +#404061 = ORIENTED_EDGE('',*,*,#404019,.T.); +#404062 = ORIENTED_EDGE('',*,*,#404042,.T.); +#404063 = PLANE('',#404064); +#404064 = AXIS2_PLACEMENT_3D('',#404065,#404066,#404067); +#404065 = CARTESIAN_POINT('',(0.,0.,0.)); +#404066 = DIRECTION('',(-0.,-0.,-1.)); +#404067 = DIRECTION('',(-1.,0.,0.)); +#404068 = ADVANCED_FACE('',(#404069),#404079,.T.); +#404069 = FACE_BOUND('',#404070,.T.); +#404070 = EDGE_LOOP('',(#404071,#404072,#404073,#404074,#404075,#404076, + #404077,#404078)); +#404071 = ORIENTED_EDGE('',*,*,#403810,.T.); +#404072 = ORIENTED_EDGE('',*,*,#403843,.T.); +#404073 = ORIENTED_EDGE('',*,*,#403874,.T.); +#404074 = ORIENTED_EDGE('',*,*,#403907,.T.); +#404075 = ORIENTED_EDGE('',*,*,#403938,.T.); +#404076 = ORIENTED_EDGE('',*,*,#403971,.T.); +#404077 = ORIENTED_EDGE('',*,*,#404002,.T.); +#404078 = ORIENTED_EDGE('',*,*,#404035,.T.); +#404079 = PLANE('',#404080); +#404080 = AXIS2_PLACEMENT_3D('',#404081,#404082,#404083); +#404081 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#404082 = DIRECTION('',(-0.,-0.,-1.)); +#404083 = DIRECTION('',(-1.,0.,0.)); +#404084 = MANIFOLD_SOLID_BREP('',#404085); +#404085 = CLOSED_SHELL('',(#404086,#404128,#404159,#404192,#404223, + #404256,#404287,#404320,#404342,#404358)); +#404086 = ADVANCED_FACE('',(#404087),#404123,.T.); +#404087 = FACE_BOUND('',#404088,.F.); +#404088 = EDGE_LOOP('',(#404089,#404099,#404108,#404116)); +#404089 = ORIENTED_EDGE('',*,*,#404090,.T.); +#404090 = EDGE_CURVE('',#404091,#404093,#404095,.T.); +#404091 = VERTEX_POINT('',#404092); +#404092 = CARTESIAN_POINT('',(133.8,-119.352,0.)); +#404093 = VERTEX_POINT('',#404094); +#404094 = CARTESIAN_POINT('',(133.8,-119.352,-4.E-02)); +#404095 = LINE('',#404096,#404097); +#404096 = CARTESIAN_POINT('',(133.8,-119.352,0.)); +#404097 = VECTOR('',#404098,1.); +#404098 = DIRECTION('',(0.,0.,-1.)); +#404099 = ORIENTED_EDGE('',*,*,#404100,.T.); +#404100 = EDGE_CURVE('',#404093,#404101,#404103,.T.); +#404101 = VERTEX_POINT('',#404102); +#404102 = CARTESIAN_POINT('',(133.852,-119.3,-4.E-02)); +#404103 = CIRCLE('',#404104,5.199847263156E-02); +#404104 = AXIS2_PLACEMENT_3D('',#404105,#404106,#404107); +#404105 = CARTESIAN_POINT('',(133.8519984726,-119.3519984726,-4.E-02)); +#404106 = DIRECTION('',(0.,0.,-1.)); +#404107 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404108 = ORIENTED_EDGE('',*,*,#404109,.F.); +#404109 = EDGE_CURVE('',#404110,#404101,#404112,.T.); +#404110 = VERTEX_POINT('',#404111); +#404111 = CARTESIAN_POINT('',(133.852,-119.3,0.)); +#404112 = LINE('',#404113,#404114); +#404113 = CARTESIAN_POINT('',(133.852,-119.3,0.)); +#404114 = VECTOR('',#404115,1.); +#404115 = DIRECTION('',(0.,0.,-1.)); +#404116 = ORIENTED_EDGE('',*,*,#404117,.F.); +#404117 = EDGE_CURVE('',#404091,#404110,#404118,.T.); +#404118 = CIRCLE('',#404119,5.199847263156E-02); +#404119 = AXIS2_PLACEMENT_3D('',#404120,#404121,#404122); +#404120 = CARTESIAN_POINT('',(133.8519984726,-119.3519984726,0.)); +#404121 = DIRECTION('',(0.,0.,-1.)); +#404122 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404123 = CYLINDRICAL_SURFACE('',#404124,5.199847263156E-02); +#404124 = AXIS2_PLACEMENT_3D('',#404125,#404126,#404127); +#404125 = CARTESIAN_POINT('',(133.8519984726,-119.3519984726,0.)); +#404126 = DIRECTION('',(-0.,-0.,1.)); +#404127 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404128 = ADVANCED_FACE('',(#404129),#404154,.F.); +#404129 = FACE_BOUND('',#404130,.F.); +#404130 = EDGE_LOOP('',(#404131,#404132,#404140,#404148)); +#404131 = ORIENTED_EDGE('',*,*,#404109,.T.); +#404132 = ORIENTED_EDGE('',*,*,#404133,.T.); +#404133 = EDGE_CURVE('',#404101,#404134,#404136,.T.); +#404134 = VERTEX_POINT('',#404135); +#404135 = CARTESIAN_POINT('',(134.248,-119.3,-4.E-02)); +#404136 = LINE('',#404137,#404138); +#404137 = CARTESIAN_POINT('',(133.852,-119.3,-4.E-02)); +#404138 = VECTOR('',#404139,1.); +#404139 = DIRECTION('',(1.,0.,0.)); +#404140 = ORIENTED_EDGE('',*,*,#404141,.F.); +#404141 = EDGE_CURVE('',#404142,#404134,#404144,.T.); +#404142 = VERTEX_POINT('',#404143); +#404143 = CARTESIAN_POINT('',(134.248,-119.3,0.)); +#404144 = LINE('',#404145,#404146); +#404145 = CARTESIAN_POINT('',(134.248,-119.3,0.)); +#404146 = VECTOR('',#404147,1.); +#404147 = DIRECTION('',(0.,0.,-1.)); +#404148 = ORIENTED_EDGE('',*,*,#404149,.F.); +#404149 = EDGE_CURVE('',#404110,#404142,#404150,.T.); +#404150 = LINE('',#404151,#404152); +#404151 = CARTESIAN_POINT('',(133.852,-119.3,0.)); +#404152 = VECTOR('',#404153,1.); +#404153 = DIRECTION('',(1.,0.,0.)); +#404154 = PLANE('',#404155); +#404155 = AXIS2_PLACEMENT_3D('',#404156,#404157,#404158); +#404156 = CARTESIAN_POINT('',(133.852,-119.3,0.)); +#404157 = DIRECTION('',(0.,-1.,0.)); +#404158 = DIRECTION('',(1.,0.,0.)); +#404159 = ADVANCED_FACE('',(#404160),#404187,.T.); +#404160 = FACE_BOUND('',#404161,.F.); +#404161 = EDGE_LOOP('',(#404162,#404163,#404172,#404180)); +#404162 = ORIENTED_EDGE('',*,*,#404141,.T.); +#404163 = ORIENTED_EDGE('',*,*,#404164,.T.); +#404164 = EDGE_CURVE('',#404134,#404165,#404167,.T.); +#404165 = VERTEX_POINT('',#404166); +#404166 = CARTESIAN_POINT('',(134.3,-119.352,-4.E-02)); +#404167 = CIRCLE('',#404168,5.199847263153E-02); +#404168 = AXIS2_PLACEMENT_3D('',#404169,#404170,#404171); +#404169 = CARTESIAN_POINT('',(134.24800152739,-119.3519984726,-4.E-02)); +#404170 = DIRECTION('',(0.,0.,-1.)); +#404171 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404172 = ORIENTED_EDGE('',*,*,#404173,.F.); +#404173 = EDGE_CURVE('',#404174,#404165,#404176,.T.); +#404174 = VERTEX_POINT('',#404175); +#404175 = CARTESIAN_POINT('',(134.3,-119.352,0.)); +#404176 = LINE('',#404177,#404178); +#404177 = CARTESIAN_POINT('',(134.3,-119.352,0.)); +#404178 = VECTOR('',#404179,1.); +#404179 = DIRECTION('',(0.,0.,-1.)); +#404180 = ORIENTED_EDGE('',*,*,#404181,.F.); +#404181 = EDGE_CURVE('',#404142,#404174,#404182,.T.); +#404182 = CIRCLE('',#404183,5.199847263153E-02); +#404183 = AXIS2_PLACEMENT_3D('',#404184,#404185,#404186); +#404184 = CARTESIAN_POINT('',(134.24800152739,-119.3519984726,0.)); +#404185 = DIRECTION('',(0.,0.,-1.)); +#404186 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404187 = CYLINDRICAL_SURFACE('',#404188,5.199847263153E-02); +#404188 = AXIS2_PLACEMENT_3D('',#404189,#404190,#404191); +#404189 = CARTESIAN_POINT('',(134.24800152739,-119.3519984726,0.)); +#404190 = DIRECTION('',(-0.,-0.,1.)); +#404191 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404192 = ADVANCED_FACE('',(#404193),#404218,.F.); +#404193 = FACE_BOUND('',#404194,.F.); +#404194 = EDGE_LOOP('',(#404195,#404196,#404204,#404212)); +#404195 = ORIENTED_EDGE('',*,*,#404173,.T.); +#404196 = ORIENTED_EDGE('',*,*,#404197,.T.); +#404197 = EDGE_CURVE('',#404165,#404198,#404200,.T.); +#404198 = VERTEX_POINT('',#404199); +#404199 = CARTESIAN_POINT('',(134.3,-119.448,-4.E-02)); +#404200 = LINE('',#404201,#404202); +#404201 = CARTESIAN_POINT('',(134.3,-119.352,-4.E-02)); +#404202 = VECTOR('',#404203,1.); +#404203 = DIRECTION('',(0.,-1.,0.)); +#404204 = ORIENTED_EDGE('',*,*,#404205,.F.); +#404205 = EDGE_CURVE('',#404206,#404198,#404208,.T.); +#404206 = VERTEX_POINT('',#404207); +#404207 = CARTESIAN_POINT('',(134.3,-119.448,0.)); +#404208 = LINE('',#404209,#404210); +#404209 = CARTESIAN_POINT('',(134.3,-119.448,0.)); +#404210 = VECTOR('',#404211,1.); +#404211 = DIRECTION('',(0.,0.,-1.)); +#404212 = ORIENTED_EDGE('',*,*,#404213,.F.); +#404213 = EDGE_CURVE('',#404174,#404206,#404214,.T.); +#404214 = LINE('',#404215,#404216); +#404215 = CARTESIAN_POINT('',(134.3,-119.352,0.)); +#404216 = VECTOR('',#404217,1.); +#404217 = DIRECTION('',(0.,-1.,0.)); +#404218 = PLANE('',#404219); +#404219 = AXIS2_PLACEMENT_3D('',#404220,#404221,#404222); +#404220 = CARTESIAN_POINT('',(134.3,-119.352,0.)); +#404221 = DIRECTION('',(-1.,-0.,-0.)); +#404222 = DIRECTION('',(0.,-1.,0.)); +#404223 = ADVANCED_FACE('',(#404224),#404251,.T.); +#404224 = FACE_BOUND('',#404225,.F.); +#404225 = EDGE_LOOP('',(#404226,#404227,#404236,#404244)); +#404226 = ORIENTED_EDGE('',*,*,#404205,.T.); +#404227 = ORIENTED_EDGE('',*,*,#404228,.T.); +#404228 = EDGE_CURVE('',#404198,#404229,#404231,.T.); +#404229 = VERTEX_POINT('',#404230); +#404230 = CARTESIAN_POINT('',(134.248,-119.5,-4.E-02)); +#404231 = CIRCLE('',#404232,5.199847263152E-02); +#404232 = AXIS2_PLACEMENT_3D('',#404233,#404234,#404235); +#404233 = CARTESIAN_POINT('',(134.24800152739,-119.4480015273,-4.E-02)); +#404234 = DIRECTION('',(0.,0.,-1.)); +#404235 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404236 = ORIENTED_EDGE('',*,*,#404237,.F.); +#404237 = EDGE_CURVE('',#404238,#404229,#404240,.T.); +#404238 = VERTEX_POINT('',#404239); +#404239 = CARTESIAN_POINT('',(134.248,-119.5,0.)); +#404240 = LINE('',#404241,#404242); +#404241 = CARTESIAN_POINT('',(134.248,-119.5,0.)); +#404242 = VECTOR('',#404243,1.); +#404243 = DIRECTION('',(0.,0.,-1.)); +#404244 = ORIENTED_EDGE('',*,*,#404245,.F.); +#404245 = EDGE_CURVE('',#404206,#404238,#404246,.T.); +#404246 = CIRCLE('',#404247,5.199847263152E-02); +#404247 = AXIS2_PLACEMENT_3D('',#404248,#404249,#404250); +#404248 = CARTESIAN_POINT('',(134.24800152739,-119.4480015273,0.)); +#404249 = DIRECTION('',(0.,0.,-1.)); +#404250 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404251 = CYLINDRICAL_SURFACE('',#404252,5.199847263152E-02); +#404252 = AXIS2_PLACEMENT_3D('',#404253,#404254,#404255); +#404253 = CARTESIAN_POINT('',(134.24800152739,-119.4480015273,0.)); +#404254 = DIRECTION('',(-0.,-0.,1.)); +#404255 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404256 = ADVANCED_FACE('',(#404257),#404282,.F.); +#404257 = FACE_BOUND('',#404258,.F.); +#404258 = EDGE_LOOP('',(#404259,#404260,#404268,#404276)); +#404259 = ORIENTED_EDGE('',*,*,#404237,.T.); +#404260 = ORIENTED_EDGE('',*,*,#404261,.T.); +#404261 = EDGE_CURVE('',#404229,#404262,#404264,.T.); +#404262 = VERTEX_POINT('',#404263); +#404263 = CARTESIAN_POINT('',(133.852,-119.5,-4.E-02)); +#404264 = LINE('',#404265,#404266); +#404265 = CARTESIAN_POINT('',(134.248,-119.5,-4.E-02)); +#404266 = VECTOR('',#404267,1.); +#404267 = DIRECTION('',(-1.,0.,0.)); +#404268 = ORIENTED_EDGE('',*,*,#404269,.F.); +#404269 = EDGE_CURVE('',#404270,#404262,#404272,.T.); +#404270 = VERTEX_POINT('',#404271); +#404271 = CARTESIAN_POINT('',(133.852,-119.5,0.)); +#404272 = LINE('',#404273,#404274); +#404273 = CARTESIAN_POINT('',(133.852,-119.5,0.)); +#404274 = VECTOR('',#404275,1.); +#404275 = DIRECTION('',(0.,0.,-1.)); +#404276 = ORIENTED_EDGE('',*,*,#404277,.F.); +#404277 = EDGE_CURVE('',#404238,#404270,#404278,.T.); +#404278 = LINE('',#404279,#404280); +#404279 = CARTESIAN_POINT('',(134.248,-119.5,0.)); +#404280 = VECTOR('',#404281,1.); +#404281 = DIRECTION('',(-1.,0.,0.)); +#404282 = PLANE('',#404283); +#404283 = AXIS2_PLACEMENT_3D('',#404284,#404285,#404286); +#404284 = CARTESIAN_POINT('',(134.248,-119.5,0.)); +#404285 = DIRECTION('',(0.,1.,0.)); +#404286 = DIRECTION('',(-1.,0.,0.)); +#404287 = ADVANCED_FACE('',(#404288),#404315,.T.); +#404288 = FACE_BOUND('',#404289,.F.); +#404289 = EDGE_LOOP('',(#404290,#404291,#404300,#404308)); +#404290 = ORIENTED_EDGE('',*,*,#404269,.T.); +#404291 = ORIENTED_EDGE('',*,*,#404292,.T.); +#404292 = EDGE_CURVE('',#404262,#404293,#404295,.T.); +#404293 = VERTEX_POINT('',#404294); +#404294 = CARTESIAN_POINT('',(133.8,-119.448,-4.E-02)); +#404295 = CIRCLE('',#404296,5.199847263154E-02); +#404296 = AXIS2_PLACEMENT_3D('',#404297,#404298,#404299); +#404297 = CARTESIAN_POINT('',(133.8519984726,-119.4480015273,-4.E-02)); +#404298 = DIRECTION('',(0.,0.,-1.)); +#404299 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404300 = ORIENTED_EDGE('',*,*,#404301,.F.); +#404301 = EDGE_CURVE('',#404302,#404293,#404304,.T.); +#404302 = VERTEX_POINT('',#404303); +#404303 = CARTESIAN_POINT('',(133.8,-119.448,0.)); +#404304 = LINE('',#404305,#404306); +#404305 = CARTESIAN_POINT('',(133.8,-119.448,0.)); +#404306 = VECTOR('',#404307,1.); +#404307 = DIRECTION('',(0.,0.,-1.)); +#404308 = ORIENTED_EDGE('',*,*,#404309,.F.); +#404309 = EDGE_CURVE('',#404270,#404302,#404310,.T.); +#404310 = CIRCLE('',#404311,5.199847263154E-02); +#404311 = AXIS2_PLACEMENT_3D('',#404312,#404313,#404314); +#404312 = CARTESIAN_POINT('',(133.8519984726,-119.4480015273,0.)); +#404313 = DIRECTION('',(0.,0.,-1.)); +#404314 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404315 = CYLINDRICAL_SURFACE('',#404316,5.199847263154E-02); +#404316 = AXIS2_PLACEMENT_3D('',#404317,#404318,#404319); +#404317 = CARTESIAN_POINT('',(133.8519984726,-119.4480015273,0.)); +#404318 = DIRECTION('',(-0.,-0.,1.)); +#404319 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404320 = ADVANCED_FACE('',(#404321),#404337,.F.); +#404321 = FACE_BOUND('',#404322,.F.); +#404322 = EDGE_LOOP('',(#404323,#404324,#404330,#404331)); +#404323 = ORIENTED_EDGE('',*,*,#404301,.T.); +#404324 = ORIENTED_EDGE('',*,*,#404325,.T.); +#404325 = EDGE_CURVE('',#404293,#404093,#404326,.T.); +#404326 = LINE('',#404327,#404328); +#404327 = CARTESIAN_POINT('',(133.8,-119.448,-4.E-02)); +#404328 = VECTOR('',#404329,1.); +#404329 = DIRECTION('',(0.,1.,0.)); +#404330 = ORIENTED_EDGE('',*,*,#404090,.F.); +#404331 = ORIENTED_EDGE('',*,*,#404332,.F.); +#404332 = EDGE_CURVE('',#404302,#404091,#404333,.T.); +#404333 = LINE('',#404334,#404335); +#404334 = CARTESIAN_POINT('',(133.8,-119.448,0.)); +#404335 = VECTOR('',#404336,1.); +#404336 = DIRECTION('',(0.,1.,0.)); +#404337 = PLANE('',#404338); +#404338 = AXIS2_PLACEMENT_3D('',#404339,#404340,#404341); +#404339 = CARTESIAN_POINT('',(133.8,-119.448,0.)); +#404340 = DIRECTION('',(1.,-0.,0.)); +#404341 = DIRECTION('',(0.,1.,0.)); +#404342 = ADVANCED_FACE('',(#404343),#404353,.F.); +#404343 = FACE_BOUND('',#404344,.F.); +#404344 = EDGE_LOOP('',(#404345,#404346,#404347,#404348,#404349,#404350, + #404351,#404352)); +#404345 = ORIENTED_EDGE('',*,*,#404117,.T.); +#404346 = ORIENTED_EDGE('',*,*,#404149,.T.); +#404347 = ORIENTED_EDGE('',*,*,#404181,.T.); +#404348 = ORIENTED_EDGE('',*,*,#404213,.T.); +#404349 = ORIENTED_EDGE('',*,*,#404245,.T.); +#404350 = ORIENTED_EDGE('',*,*,#404277,.T.); +#404351 = ORIENTED_EDGE('',*,*,#404309,.T.); +#404352 = ORIENTED_EDGE('',*,*,#404332,.T.); +#404353 = PLANE('',#404354); +#404354 = AXIS2_PLACEMENT_3D('',#404355,#404356,#404357); +#404355 = CARTESIAN_POINT('',(0.,0.,0.)); +#404356 = DIRECTION('',(-0.,-0.,-1.)); +#404357 = DIRECTION('',(-1.,0.,0.)); +#404358 = ADVANCED_FACE('',(#404359),#404369,.T.); +#404359 = FACE_BOUND('',#404360,.T.); +#404360 = EDGE_LOOP('',(#404361,#404362,#404363,#404364,#404365,#404366, + #404367,#404368)); +#404361 = ORIENTED_EDGE('',*,*,#404100,.T.); +#404362 = ORIENTED_EDGE('',*,*,#404133,.T.); +#404363 = ORIENTED_EDGE('',*,*,#404164,.T.); +#404364 = ORIENTED_EDGE('',*,*,#404197,.T.); +#404365 = ORIENTED_EDGE('',*,*,#404228,.T.); +#404366 = ORIENTED_EDGE('',*,*,#404261,.T.); +#404367 = ORIENTED_EDGE('',*,*,#404292,.T.); +#404368 = ORIENTED_EDGE('',*,*,#404325,.T.); +#404369 = PLANE('',#404370); +#404370 = AXIS2_PLACEMENT_3D('',#404371,#404372,#404373); +#404371 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#404372 = DIRECTION('',(-0.,-0.,-1.)); +#404373 = DIRECTION('',(-1.,0.,0.)); +#404374 = MANIFOLD_SOLID_BREP('',#404375); +#404375 = CLOSED_SHELL('',(#404376,#404418,#404449,#404482,#404513, + #404546,#404577,#404610,#404632,#404648)); +#404376 = ADVANCED_FACE('',(#404377),#404413,.T.); +#404377 = FACE_BOUND('',#404378,.F.); +#404378 = EDGE_LOOP('',(#404379,#404389,#404398,#404406)); +#404379 = ORIENTED_EDGE('',*,*,#404380,.T.); +#404380 = EDGE_CURVE('',#404381,#404383,#404385,.T.); +#404381 = VERTEX_POINT('',#404382); +#404382 = CARTESIAN_POINT('',(133.8,-119.752,0.)); +#404383 = VERTEX_POINT('',#404384); +#404384 = CARTESIAN_POINT('',(133.8,-119.752,-4.E-02)); +#404385 = LINE('',#404386,#404387); +#404386 = CARTESIAN_POINT('',(133.8,-119.752,0.)); +#404387 = VECTOR('',#404388,1.); +#404388 = DIRECTION('',(0.,0.,-1.)); +#404389 = ORIENTED_EDGE('',*,*,#404390,.T.); +#404390 = EDGE_CURVE('',#404383,#404391,#404393,.T.); +#404391 = VERTEX_POINT('',#404392); +#404392 = CARTESIAN_POINT('',(133.852,-119.7,-4.E-02)); +#404393 = CIRCLE('',#404394,5.199847263155E-02); +#404394 = AXIS2_PLACEMENT_3D('',#404395,#404396,#404397); +#404395 = CARTESIAN_POINT('',(133.8519984726,-119.7519984726,-4.E-02)); +#404396 = DIRECTION('',(0.,0.,-1.)); +#404397 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404398 = ORIENTED_EDGE('',*,*,#404399,.F.); +#404399 = EDGE_CURVE('',#404400,#404391,#404402,.T.); +#404400 = VERTEX_POINT('',#404401); +#404401 = CARTESIAN_POINT('',(133.852,-119.7,0.)); +#404402 = LINE('',#404403,#404404); +#404403 = CARTESIAN_POINT('',(133.852,-119.7,0.)); +#404404 = VECTOR('',#404405,1.); +#404405 = DIRECTION('',(0.,0.,-1.)); +#404406 = ORIENTED_EDGE('',*,*,#404407,.F.); +#404407 = EDGE_CURVE('',#404381,#404400,#404408,.T.); +#404408 = CIRCLE('',#404409,5.199847263155E-02); +#404409 = AXIS2_PLACEMENT_3D('',#404410,#404411,#404412); +#404410 = CARTESIAN_POINT('',(133.8519984726,-119.7519984726,0.)); +#404411 = DIRECTION('',(0.,0.,-1.)); +#404412 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404413 = CYLINDRICAL_SURFACE('',#404414,5.199847263155E-02); +#404414 = AXIS2_PLACEMENT_3D('',#404415,#404416,#404417); +#404415 = CARTESIAN_POINT('',(133.8519984726,-119.7519984726,0.)); +#404416 = DIRECTION('',(-0.,-0.,1.)); +#404417 = DIRECTION('',(-0.999999999569,-2.937376429279E-05,-0.)); +#404418 = ADVANCED_FACE('',(#404419),#404444,.F.); +#404419 = FACE_BOUND('',#404420,.F.); +#404420 = EDGE_LOOP('',(#404421,#404422,#404430,#404438)); +#404421 = ORIENTED_EDGE('',*,*,#404399,.T.); +#404422 = ORIENTED_EDGE('',*,*,#404423,.T.); +#404423 = EDGE_CURVE('',#404391,#404424,#404426,.T.); +#404424 = VERTEX_POINT('',#404425); +#404425 = CARTESIAN_POINT('',(134.248,-119.7,-4.E-02)); +#404426 = LINE('',#404427,#404428); +#404427 = CARTESIAN_POINT('',(133.852,-119.7,-4.E-02)); +#404428 = VECTOR('',#404429,1.); +#404429 = DIRECTION('',(1.,0.,0.)); +#404430 = ORIENTED_EDGE('',*,*,#404431,.F.); +#404431 = EDGE_CURVE('',#404432,#404424,#404434,.T.); +#404432 = VERTEX_POINT('',#404433); +#404433 = CARTESIAN_POINT('',(134.248,-119.7,0.)); +#404434 = LINE('',#404435,#404436); +#404435 = CARTESIAN_POINT('',(134.248,-119.7,0.)); +#404436 = VECTOR('',#404437,1.); +#404437 = DIRECTION('',(0.,0.,-1.)); +#404438 = ORIENTED_EDGE('',*,*,#404439,.F.); +#404439 = EDGE_CURVE('',#404400,#404432,#404440,.T.); +#404440 = LINE('',#404441,#404442); +#404441 = CARTESIAN_POINT('',(133.852,-119.7,0.)); +#404442 = VECTOR('',#404443,1.); +#404443 = DIRECTION('',(1.,0.,0.)); +#404444 = PLANE('',#404445); +#404445 = AXIS2_PLACEMENT_3D('',#404446,#404447,#404448); +#404446 = CARTESIAN_POINT('',(133.852,-119.7,0.)); +#404447 = DIRECTION('',(0.,-1.,0.)); +#404448 = DIRECTION('',(1.,0.,0.)); +#404449 = ADVANCED_FACE('',(#404450),#404477,.T.); +#404450 = FACE_BOUND('',#404451,.F.); +#404451 = EDGE_LOOP('',(#404452,#404453,#404462,#404470)); +#404452 = ORIENTED_EDGE('',*,*,#404431,.T.); +#404453 = ORIENTED_EDGE('',*,*,#404454,.T.); +#404454 = EDGE_CURVE('',#404424,#404455,#404457,.T.); +#404455 = VERTEX_POINT('',#404456); +#404456 = CARTESIAN_POINT('',(134.3,-119.752,-4.E-02)); +#404457 = CIRCLE('',#404458,5.199847263153E-02); +#404458 = AXIS2_PLACEMENT_3D('',#404459,#404460,#404461); +#404459 = CARTESIAN_POINT('',(134.24800152739,-119.7519984726,-4.E-02)); +#404460 = DIRECTION('',(0.,0.,-1.)); +#404461 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404462 = ORIENTED_EDGE('',*,*,#404463,.F.); +#404463 = EDGE_CURVE('',#404464,#404455,#404466,.T.); +#404464 = VERTEX_POINT('',#404465); +#404465 = CARTESIAN_POINT('',(134.3,-119.752,0.)); +#404466 = LINE('',#404467,#404468); +#404467 = CARTESIAN_POINT('',(134.3,-119.752,0.)); +#404468 = VECTOR('',#404469,1.); +#404469 = DIRECTION('',(0.,0.,-1.)); +#404470 = ORIENTED_EDGE('',*,*,#404471,.F.); +#404471 = EDGE_CURVE('',#404432,#404464,#404472,.T.); +#404472 = CIRCLE('',#404473,5.199847263153E-02); +#404473 = AXIS2_PLACEMENT_3D('',#404474,#404475,#404476); +#404474 = CARTESIAN_POINT('',(134.24800152739,-119.7519984726,0.)); +#404475 = DIRECTION('',(0.,0.,-1.)); +#404476 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404477 = CYLINDRICAL_SURFACE('',#404478,5.199847263153E-02); +#404478 = AXIS2_PLACEMENT_3D('',#404479,#404480,#404481); +#404479 = CARTESIAN_POINT('',(134.24800152739,-119.7519984726,0.)); +#404480 = DIRECTION('',(-0.,-0.,1.)); +#404481 = DIRECTION('',(-2.937376538596E-05,0.999999999569,0.)); +#404482 = ADVANCED_FACE('',(#404483),#404508,.F.); +#404483 = FACE_BOUND('',#404484,.F.); +#404484 = EDGE_LOOP('',(#404485,#404486,#404494,#404502)); +#404485 = ORIENTED_EDGE('',*,*,#404463,.T.); +#404486 = ORIENTED_EDGE('',*,*,#404487,.T.); +#404487 = EDGE_CURVE('',#404455,#404488,#404490,.T.); +#404488 = VERTEX_POINT('',#404489); +#404489 = CARTESIAN_POINT('',(134.3,-119.848,-4.E-02)); +#404490 = LINE('',#404491,#404492); +#404491 = CARTESIAN_POINT('',(134.3,-119.752,-4.E-02)); +#404492 = VECTOR('',#404493,1.); +#404493 = DIRECTION('',(0.,-1.,0.)); +#404494 = ORIENTED_EDGE('',*,*,#404495,.F.); +#404495 = EDGE_CURVE('',#404496,#404488,#404498,.T.); +#404496 = VERTEX_POINT('',#404497); +#404497 = CARTESIAN_POINT('',(134.3,-119.848,0.)); +#404498 = LINE('',#404499,#404500); +#404499 = CARTESIAN_POINT('',(134.3,-119.848,0.)); +#404500 = VECTOR('',#404501,1.); +#404501 = DIRECTION('',(0.,0.,-1.)); +#404502 = ORIENTED_EDGE('',*,*,#404503,.F.); +#404503 = EDGE_CURVE('',#404464,#404496,#404504,.T.); +#404504 = LINE('',#404505,#404506); +#404505 = CARTESIAN_POINT('',(134.3,-119.752,0.)); +#404506 = VECTOR('',#404507,1.); +#404507 = DIRECTION('',(0.,-1.,0.)); +#404508 = PLANE('',#404509); +#404509 = AXIS2_PLACEMENT_3D('',#404510,#404511,#404512); +#404510 = CARTESIAN_POINT('',(134.3,-119.752,0.)); +#404511 = DIRECTION('',(-1.,-0.,-0.)); +#404512 = DIRECTION('',(0.,-1.,0.)); +#404513 = ADVANCED_FACE('',(#404514),#404541,.T.); +#404514 = FACE_BOUND('',#404515,.F.); +#404515 = EDGE_LOOP('',(#404516,#404517,#404526,#404534)); +#404516 = ORIENTED_EDGE('',*,*,#404495,.T.); +#404517 = ORIENTED_EDGE('',*,*,#404518,.T.); +#404518 = EDGE_CURVE('',#404488,#404519,#404521,.T.); +#404519 = VERTEX_POINT('',#404520); +#404520 = CARTESIAN_POINT('',(134.248,-119.9,-4.E-02)); +#404521 = CIRCLE('',#404522,5.199847263152E-02); +#404522 = AXIS2_PLACEMENT_3D('',#404523,#404524,#404525); +#404523 = CARTESIAN_POINT('',(134.24800152739,-119.8480015273,-4.E-02)); +#404524 = DIRECTION('',(0.,0.,-1.)); +#404525 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404526 = ORIENTED_EDGE('',*,*,#404527,.F.); +#404527 = EDGE_CURVE('',#404528,#404519,#404530,.T.); +#404528 = VERTEX_POINT('',#404529); +#404529 = CARTESIAN_POINT('',(134.248,-119.9,0.)); +#404530 = LINE('',#404531,#404532); +#404531 = CARTESIAN_POINT('',(134.248,-119.9,0.)); +#404532 = VECTOR('',#404533,1.); +#404533 = DIRECTION('',(0.,0.,-1.)); +#404534 = ORIENTED_EDGE('',*,*,#404535,.F.); +#404535 = EDGE_CURVE('',#404496,#404528,#404536,.T.); +#404536 = CIRCLE('',#404537,5.199847263152E-02); +#404537 = AXIS2_PLACEMENT_3D('',#404538,#404539,#404540); +#404538 = CARTESIAN_POINT('',(134.24800152739,-119.8480015273,0.)); +#404539 = DIRECTION('',(0.,0.,-1.)); +#404540 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404541 = CYLINDRICAL_SURFACE('',#404542,5.199847263152E-02); +#404542 = AXIS2_PLACEMENT_3D('',#404543,#404544,#404545); +#404543 = CARTESIAN_POINT('',(134.24800152739,-119.8480015273,0.)); +#404544 = DIRECTION('',(-0.,-0.,1.)); +#404545 = DIRECTION('',(0.999999999569,2.937376483939E-05,0.)); +#404546 = ADVANCED_FACE('',(#404547),#404572,.F.); +#404547 = FACE_BOUND('',#404548,.F.); +#404548 = EDGE_LOOP('',(#404549,#404550,#404558,#404566)); +#404549 = ORIENTED_EDGE('',*,*,#404527,.T.); +#404550 = ORIENTED_EDGE('',*,*,#404551,.T.); +#404551 = EDGE_CURVE('',#404519,#404552,#404554,.T.); +#404552 = VERTEX_POINT('',#404553); +#404553 = CARTESIAN_POINT('',(133.852,-119.9,-4.E-02)); +#404554 = LINE('',#404555,#404556); +#404555 = CARTESIAN_POINT('',(134.248,-119.9,-4.E-02)); +#404556 = VECTOR('',#404557,1.); +#404557 = DIRECTION('',(-1.,0.,0.)); +#404558 = ORIENTED_EDGE('',*,*,#404559,.F.); +#404559 = EDGE_CURVE('',#404560,#404552,#404562,.T.); +#404560 = VERTEX_POINT('',#404561); +#404561 = CARTESIAN_POINT('',(133.852,-119.9,0.)); +#404562 = LINE('',#404563,#404564); +#404563 = CARTESIAN_POINT('',(133.852,-119.9,0.)); +#404564 = VECTOR('',#404565,1.); +#404565 = DIRECTION('',(0.,0.,-1.)); +#404566 = ORIENTED_EDGE('',*,*,#404567,.F.); +#404567 = EDGE_CURVE('',#404528,#404560,#404568,.T.); +#404568 = LINE('',#404569,#404570); +#404569 = CARTESIAN_POINT('',(134.248,-119.9,0.)); +#404570 = VECTOR('',#404571,1.); +#404571 = DIRECTION('',(-1.,0.,0.)); +#404572 = PLANE('',#404573); +#404573 = AXIS2_PLACEMENT_3D('',#404574,#404575,#404576); +#404574 = CARTESIAN_POINT('',(134.248,-119.9,0.)); +#404575 = DIRECTION('',(0.,1.,0.)); +#404576 = DIRECTION('',(-1.,0.,0.)); +#404577 = ADVANCED_FACE('',(#404578),#404605,.T.); +#404578 = FACE_BOUND('',#404579,.F.); +#404579 = EDGE_LOOP('',(#404580,#404581,#404590,#404598)); +#404580 = ORIENTED_EDGE('',*,*,#404559,.T.); +#404581 = ORIENTED_EDGE('',*,*,#404582,.T.); +#404582 = EDGE_CURVE('',#404552,#404583,#404585,.T.); +#404583 = VERTEX_POINT('',#404584); +#404584 = CARTESIAN_POINT('',(133.8,-119.848,-4.E-02)); +#404585 = CIRCLE('',#404586,5.199847263154E-02); +#404586 = AXIS2_PLACEMENT_3D('',#404587,#404588,#404589); +#404587 = CARTESIAN_POINT('',(133.8519984726,-119.8480015273,-4.E-02)); +#404588 = DIRECTION('',(0.,0.,-1.)); +#404589 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404590 = ORIENTED_EDGE('',*,*,#404591,.F.); +#404591 = EDGE_CURVE('',#404592,#404583,#404594,.T.); +#404592 = VERTEX_POINT('',#404593); +#404593 = CARTESIAN_POINT('',(133.8,-119.848,0.)); +#404594 = LINE('',#404595,#404596); +#404595 = CARTESIAN_POINT('',(133.8,-119.848,0.)); +#404596 = VECTOR('',#404597,1.); +#404597 = DIRECTION('',(0.,0.,-1.)); +#404598 = ORIENTED_EDGE('',*,*,#404599,.F.); +#404599 = EDGE_CURVE('',#404560,#404592,#404600,.T.); +#404600 = CIRCLE('',#404601,5.199847263154E-02); +#404601 = AXIS2_PLACEMENT_3D('',#404602,#404603,#404604); +#404602 = CARTESIAN_POINT('',(133.8519984726,-119.8480015273,0.)); +#404603 = DIRECTION('',(0.,0.,-1.)); +#404604 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404605 = CYLINDRICAL_SURFACE('',#404606,5.199847263154E-02); +#404606 = AXIS2_PLACEMENT_3D('',#404607,#404608,#404609); +#404607 = CARTESIAN_POINT('',(133.8519984726,-119.8480015273,0.)); +#404608 = DIRECTION('',(-0.,-0.,1.)); +#404609 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#404610 = ADVANCED_FACE('',(#404611),#404627,.F.); +#404611 = FACE_BOUND('',#404612,.F.); +#404612 = EDGE_LOOP('',(#404613,#404614,#404620,#404621)); +#404613 = ORIENTED_EDGE('',*,*,#404591,.T.); +#404614 = ORIENTED_EDGE('',*,*,#404615,.T.); +#404615 = EDGE_CURVE('',#404583,#404383,#404616,.T.); +#404616 = LINE('',#404617,#404618); +#404617 = CARTESIAN_POINT('',(133.8,-119.848,-4.E-02)); +#404618 = VECTOR('',#404619,1.); +#404619 = DIRECTION('',(0.,1.,0.)); +#404620 = ORIENTED_EDGE('',*,*,#404380,.F.); +#404621 = ORIENTED_EDGE('',*,*,#404622,.F.); +#404622 = EDGE_CURVE('',#404592,#404381,#404623,.T.); +#404623 = LINE('',#404624,#404625); +#404624 = CARTESIAN_POINT('',(133.8,-119.848,0.)); +#404625 = VECTOR('',#404626,1.); +#404626 = DIRECTION('',(0.,1.,0.)); +#404627 = PLANE('',#404628); +#404628 = AXIS2_PLACEMENT_3D('',#404629,#404630,#404631); +#404629 = CARTESIAN_POINT('',(133.8,-119.848,0.)); +#404630 = DIRECTION('',(1.,-0.,0.)); +#404631 = DIRECTION('',(0.,1.,0.)); +#404632 = ADVANCED_FACE('',(#404633),#404643,.F.); +#404633 = FACE_BOUND('',#404634,.F.); +#404634 = EDGE_LOOP('',(#404635,#404636,#404637,#404638,#404639,#404640, + #404641,#404642)); +#404635 = ORIENTED_EDGE('',*,*,#404407,.T.); +#404636 = ORIENTED_EDGE('',*,*,#404439,.T.); +#404637 = ORIENTED_EDGE('',*,*,#404471,.T.); +#404638 = ORIENTED_EDGE('',*,*,#404503,.T.); +#404639 = ORIENTED_EDGE('',*,*,#404535,.T.); +#404640 = ORIENTED_EDGE('',*,*,#404567,.T.); +#404641 = ORIENTED_EDGE('',*,*,#404599,.T.); +#404642 = ORIENTED_EDGE('',*,*,#404622,.T.); +#404643 = PLANE('',#404644); +#404644 = AXIS2_PLACEMENT_3D('',#404645,#404646,#404647); +#404645 = CARTESIAN_POINT('',(0.,0.,0.)); +#404646 = DIRECTION('',(-0.,-0.,-1.)); +#404647 = DIRECTION('',(-1.,0.,0.)); +#404648 = ADVANCED_FACE('',(#404649),#404659,.T.); +#404649 = FACE_BOUND('',#404650,.T.); +#404650 = EDGE_LOOP('',(#404651,#404652,#404653,#404654,#404655,#404656, + #404657,#404658)); +#404651 = ORIENTED_EDGE('',*,*,#404390,.T.); +#404652 = ORIENTED_EDGE('',*,*,#404423,.T.); +#404653 = ORIENTED_EDGE('',*,*,#404454,.T.); +#404654 = ORIENTED_EDGE('',*,*,#404487,.T.); +#404655 = ORIENTED_EDGE('',*,*,#404518,.T.); +#404656 = ORIENTED_EDGE('',*,*,#404551,.T.); +#404657 = ORIENTED_EDGE('',*,*,#404582,.T.); +#404658 = ORIENTED_EDGE('',*,*,#404615,.T.); +#404659 = PLANE('',#404660); +#404660 = AXIS2_PLACEMENT_3D('',#404661,#404662,#404663); +#404661 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#404662 = DIRECTION('',(-0.,-0.,-1.)); +#404663 = DIRECTION('',(-1.,0.,0.)); +#404664 = MANIFOLD_SOLID_BREP('',#404665); +#404665 = CLOSED_SHELL('',(#404666,#404706,#404737,#404768,#405451, + #406134,#406151,#406168,#406185,#406202,#406219,#406236,#406253, + #406270,#406287,#406304,#406321,#406338,#406355,#406372,#406389, + #406406,#406423,#406440,#406457,#406474,#406491,#406508,#406525, + #406542,#406559,#406576,#406593,#406610,#406627,#406644,#406661, + #406678,#406695,#406712,#406729,#406746,#406763,#406780,#406797, + #406814,#406831,#406848,#406865,#406882,#406899,#406916,#406933, + #406950,#406967,#406984,#407001,#407018,#407035,#407052,#407069, + #407086,#407103,#407120,#407137,#407154,#407171,#407188,#407205, + #407222,#407239,#407256,#407273,#407290,#407307,#407324,#407341, + #407358,#407375,#407392,#407409,#407426,#407443,#407460,#407477, + #407494,#407506,#407523)); +#404666 = ADVANCED_FACE('',(#404667),#404701,.F.); +#404667 = FACE_BOUND('',#404668,.F.); +#404668 = EDGE_LOOP('',(#404669,#404679,#404687,#404695)); +#404669 = ORIENTED_EDGE('',*,*,#404670,.T.); +#404670 = EDGE_CURVE('',#404671,#404673,#404675,.T.); +#404671 = VERTEX_POINT('',#404672); +#404672 = CARTESIAN_POINT('',(132.593419,-118.245257,0.)); +#404673 = VERTEX_POINT('',#404674); +#404674 = CARTESIAN_POINT('',(132.593419,-118.245257,-4.E-02)); +#404675 = LINE('',#404676,#404677); +#404676 = CARTESIAN_POINT('',(132.593419,-118.245257,0.)); +#404677 = VECTOR('',#404678,1.); +#404678 = DIRECTION('',(0.,0.,-1.)); +#404679 = ORIENTED_EDGE('',*,*,#404680,.T.); +#404680 = EDGE_CURVE('',#404673,#404681,#404683,.T.); +#404681 = VERTEX_POINT('',#404682); +#404682 = CARTESIAN_POINT('',(132.595,-118.245,-4.E-02)); +#404683 = LINE('',#404684,#404685); +#404684 = CARTESIAN_POINT('',(132.593419,-118.245257,-4.E-02)); +#404685 = VECTOR('',#404686,1.); +#404686 = DIRECTION('',(0.98704408457,0.160449291415,0.)); +#404687 = ORIENTED_EDGE('',*,*,#404688,.F.); +#404688 = EDGE_CURVE('',#404689,#404681,#404691,.T.); +#404689 = VERTEX_POINT('',#404690); +#404690 = CARTESIAN_POINT('',(132.595,-118.245,0.)); +#404691 = LINE('',#404692,#404693); +#404692 = CARTESIAN_POINT('',(132.595,-118.245,0.)); +#404693 = VECTOR('',#404694,1.); +#404694 = DIRECTION('',(0.,0.,-1.)); +#404695 = ORIENTED_EDGE('',*,*,#404696,.F.); +#404696 = EDGE_CURVE('',#404671,#404689,#404697,.T.); +#404697 = LINE('',#404698,#404699); +#404698 = CARTESIAN_POINT('',(132.593419,-118.245257,0.)); +#404699 = VECTOR('',#404700,1.); +#404700 = DIRECTION('',(0.98704408457,0.160449291415,0.)); +#404701 = PLANE('',#404702); +#404702 = AXIS2_PLACEMENT_3D('',#404703,#404704,#404705); +#404703 = CARTESIAN_POINT('',(132.593419,-118.245257,0.)); +#404704 = DIRECTION('',(0.160449291415,-0.98704408457,0.)); +#404705 = DIRECTION('',(0.98704408457,0.160449291415,0.)); +#404706 = ADVANCED_FACE('',(#404707),#404732,.F.); +#404707 = FACE_BOUND('',#404708,.F.); +#404708 = EDGE_LOOP('',(#404709,#404719,#404725,#404726)); +#404709 = ORIENTED_EDGE('',*,*,#404710,.T.); +#404710 = EDGE_CURVE('',#404711,#404713,#404715,.T.); +#404711 = VERTEX_POINT('',#404712); +#404712 = CARTESIAN_POINT('',(132.59119,-118.246,0.)); +#404713 = VERTEX_POINT('',#404714); +#404714 = CARTESIAN_POINT('',(132.59119,-118.246,-4.E-02)); +#404715 = LINE('',#404716,#404717); +#404716 = CARTESIAN_POINT('',(132.59119,-118.246,0.)); +#404717 = VECTOR('',#404718,1.); +#404718 = DIRECTION('',(0.,0.,-1.)); +#404719 = ORIENTED_EDGE('',*,*,#404720,.T.); +#404720 = EDGE_CURVE('',#404713,#404673,#404721,.T.); +#404721 = LINE('',#404722,#404723); +#404722 = CARTESIAN_POINT('',(132.59119,-118.246,-4.E-02)); +#404723 = VECTOR('',#404724,1.); +#404724 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#404725 = ORIENTED_EDGE('',*,*,#404670,.F.); +#404726 = ORIENTED_EDGE('',*,*,#404727,.F.); +#404727 = EDGE_CURVE('',#404711,#404671,#404728,.T.); +#404728 = LINE('',#404729,#404730); +#404729 = CARTESIAN_POINT('',(132.59119,-118.246,0.)); +#404730 = VECTOR('',#404731,1.); +#404731 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#404732 = PLANE('',#404733); +#404733 = AXIS2_PLACEMENT_3D('',#404734,#404735,#404736); +#404734 = CARTESIAN_POINT('',(132.59119,-118.246,0.)); +#404735 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#404736 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#404737 = ADVANCED_FACE('',(#404738),#404763,.F.); +#404738 = FACE_BOUND('',#404739,.F.); +#404739 = EDGE_LOOP('',(#404740,#404741,#404749,#404757)); +#404740 = ORIENTED_EDGE('',*,*,#404688,.T.); +#404741 = ORIENTED_EDGE('',*,*,#404742,.T.); +#404742 = EDGE_CURVE('',#404681,#404743,#404745,.T.); +#404743 = VERTEX_POINT('',#404744); +#404744 = CARTESIAN_POINT('',(133.405,-118.245,-4.E-02)); +#404745 = LINE('',#404746,#404747); +#404746 = CARTESIAN_POINT('',(132.595,-118.245,-4.E-02)); +#404747 = VECTOR('',#404748,1.); +#404748 = DIRECTION('',(1.,0.,0.)); +#404749 = ORIENTED_EDGE('',*,*,#404750,.F.); +#404750 = EDGE_CURVE('',#404751,#404743,#404753,.T.); +#404751 = VERTEX_POINT('',#404752); +#404752 = CARTESIAN_POINT('',(133.405,-118.245,0.)); +#404753 = LINE('',#404754,#404755); +#404754 = CARTESIAN_POINT('',(133.405,-118.245,0.)); +#404755 = VECTOR('',#404756,1.); +#404756 = DIRECTION('',(0.,0.,-1.)); +#404757 = ORIENTED_EDGE('',*,*,#404758,.F.); +#404758 = EDGE_CURVE('',#404689,#404751,#404759,.T.); +#404759 = LINE('',#404760,#404761); +#404760 = CARTESIAN_POINT('',(132.595,-118.245,0.)); +#404761 = VECTOR('',#404762,1.); +#404762 = DIRECTION('',(1.,0.,0.)); +#404763 = PLANE('',#404764); +#404764 = AXIS2_PLACEMENT_3D('',#404765,#404766,#404767); +#404765 = CARTESIAN_POINT('',(132.595,-118.245,0.)); +#404766 = DIRECTION('',(0.,-1.,0.)); +#404767 = DIRECTION('',(1.,0.,0.)); +#404768 = ADVANCED_FACE('',(#404769,#405424,#405435),#405446,.F.); +#404769 = FACE_BOUND('',#404770,.F.); +#404770 = EDGE_LOOP('',(#404771,#404772,#404773,#404781,#404789,#404797, + #404805,#404813,#404821,#404829,#404837,#404845,#404853,#404861, + #404869,#404878,#404886,#404894,#404902,#404910,#404918,#404926, + #404934,#404942,#404950,#404958,#404966,#404974,#404982,#404990, + #404998,#405006,#405014,#405022,#405030,#405038,#405047,#405055, + #405063,#405071,#405079,#405087,#405095,#405103,#405111,#405119, + #405127,#405135,#405143,#405151,#405159,#405167,#405175,#405183, + #405191,#405199,#405207,#405216,#405224,#405232,#405240,#405248, + #405256,#405264,#405272,#405280,#405288,#405296,#405304,#405312, + #405320,#405328,#405336,#405344,#405352,#405360,#405368,#405376, + #405385,#405393,#405401,#405409,#405417,#405423)); +#404771 = ORIENTED_EDGE('',*,*,#404696,.T.); +#404772 = ORIENTED_EDGE('',*,*,#404758,.T.); +#404773 = ORIENTED_EDGE('',*,*,#404774,.T.); +#404774 = EDGE_CURVE('',#404751,#404775,#404777,.T.); +#404775 = VERTEX_POINT('',#404776); +#404776 = CARTESIAN_POINT('',(133.406581,-118.245257,0.)); +#404777 = LINE('',#404778,#404779); +#404778 = CARTESIAN_POINT('',(133.405,-118.245,0.)); +#404779 = VECTOR('',#404780,1.); +#404780 = DIRECTION('',(0.98704408457,-0.160449291415,0.)); +#404781 = ORIENTED_EDGE('',*,*,#404782,.T.); +#404782 = EDGE_CURVE('',#404775,#404783,#404785,.T.); +#404783 = VERTEX_POINT('',#404784); +#404784 = CARTESIAN_POINT('',(133.411581,-118.246257,0.)); +#404785 = LINE('',#404786,#404787); +#404786 = CARTESIAN_POINT('',(133.406581,-118.245257,0.)); +#404787 = VECTOR('',#404788,1.); +#404788 = DIRECTION('',(0.980580675691,-0.196116135138,0.)); +#404789 = ORIENTED_EDGE('',*,*,#404790,.T.); +#404790 = EDGE_CURVE('',#404783,#404791,#404793,.T.); +#404791 = VERTEX_POINT('',#404792); +#404792 = CARTESIAN_POINT('',(133.41381,-118.247,0.)); +#404793 = LINE('',#404794,#404795); +#404794 = CARTESIAN_POINT('',(133.411581,-118.246257,0.)); +#404795 = VECTOR('',#404796,1.); +#404796 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#404797 = ORIENTED_EDGE('',*,*,#404798,.T.); +#404798 = EDGE_CURVE('',#404791,#404799,#404801,.T.); +#404799 = VERTEX_POINT('',#404800); +#404800 = CARTESIAN_POINT('',(133.420236,-118.248528,0.)); +#404801 = LINE('',#404802,#404803); +#404802 = CARTESIAN_POINT('',(133.41381,-118.247,0.)); +#404803 = VECTOR('',#404804,1.); +#404804 = DIRECTION('',(0.972874398407,-0.231333968373,0.)); +#404805 = ORIENTED_EDGE('',*,*,#404806,.T.); +#404806 = EDGE_CURVE('',#404799,#404807,#404809,.T.); +#404807 = VERTEX_POINT('',#404808); +#404808 = CARTESIAN_POINT('',(133.42192,-118.24937,0.)); +#404809 = LINE('',#404810,#404811); +#404810 = CARTESIAN_POINT('',(133.420236,-118.248528,0.)); +#404811 = VECTOR('',#404812,1.); +#404812 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#404813 = ORIENTED_EDGE('',*,*,#404814,.T.); +#404814 = EDGE_CURVE('',#404807,#404815,#404817,.T.); +#404815 = VERTEX_POINT('',#404816); +#404816 = CARTESIAN_POINT('',(133.429236,-118.253528,0.)); +#404817 = LINE('',#404818,#404819); +#404818 = CARTESIAN_POINT('',(133.42192,-118.24937,0.)); +#404819 = VECTOR('',#404820,1.); +#404820 = DIRECTION('',(0.86939622862,-0.494115571159,0.)); +#404821 = ORIENTED_EDGE('',*,*,#404822,.T.); +#404822 = EDGE_CURVE('',#404815,#404823,#404825,.T.); +#404823 = VERTEX_POINT('',#404824); +#404824 = CARTESIAN_POINT('',(133.430536,-118.254464,0.)); +#404825 = LINE('',#404826,#404827); +#404826 = CARTESIAN_POINT('',(133.429236,-118.253528,0.)); +#404827 = VECTOR('',#404828,1.); +#404828 = DIRECTION('',(0.81153434145,-0.584304725847,0.)); +#404829 = ORIENTED_EDGE('',*,*,#404830,.T.); +#404830 = EDGE_CURVE('',#404823,#404831,#404833,.T.); +#404831 = VERTEX_POINT('',#404832); +#404832 = CARTESIAN_POINT('',(133.434536,-118.257464,0.)); +#404833 = LINE('',#404834,#404835); +#404834 = CARTESIAN_POINT('',(133.430536,-118.254464,0.)); +#404835 = VECTOR('',#404836,1.); +#404836 = DIRECTION('',(0.800000000001,-0.599999999998,0.)); +#404837 = ORIENTED_EDGE('',*,*,#404838,.T.); +#404838 = EDGE_CURVE('',#404831,#404839,#404841,.T.); +#404839 = VERTEX_POINT('',#404840); +#404840 = CARTESIAN_POINT('',(133.442536,-118.265464,0.)); +#404841 = LINE('',#404842,#404843); +#404842 = CARTESIAN_POINT('',(133.434536,-118.257464,0.)); +#404843 = VECTOR('',#404844,1.); +#404844 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#404845 = ORIENTED_EDGE('',*,*,#404846,.T.); +#404846 = EDGE_CURVE('',#404839,#404847,#404849,.T.); +#404847 = VERTEX_POINT('',#404848); +#404848 = CARTESIAN_POINT('',(133.443472,-118.266764,0.)); +#404849 = LINE('',#404850,#404851); +#404850 = CARTESIAN_POINT('',(133.442536,-118.265464,0.)); +#404851 = VECTOR('',#404852,1.); +#404852 = DIRECTION('',(0.584304725855,-0.811534341444,0.)); +#404853 = ORIENTED_EDGE('',*,*,#404854,.T.); +#404854 = EDGE_CURVE('',#404847,#404855,#404857,.T.); +#404855 = VERTEX_POINT('',#404856); +#404856 = CARTESIAN_POINT('',(133.446472,-118.270764,0.)); +#404857 = LINE('',#404858,#404859); +#404858 = CARTESIAN_POINT('',(133.443472,-118.266764,0.)); +#404859 = VECTOR('',#404860,1.); +#404860 = DIRECTION('',(0.599999999998,-0.800000000002,0.)); +#404861 = ORIENTED_EDGE('',*,*,#404862,.T.); +#404862 = EDGE_CURVE('',#404855,#404863,#404865,.T.); +#404863 = VERTEX_POINT('',#404864); +#404864 = CARTESIAN_POINT('',(133.447108,-118.272036,0.)); +#404865 = LINE('',#404866,#404867); +#404866 = CARTESIAN_POINT('',(133.446472,-118.270764,0.)); +#404867 = VECTOR('',#404868,1.); +#404868 = DIRECTION('',(0.447213595492,-0.894427191004,0.)); +#404869 = ORIENTED_EDGE('',*,*,#404870,.T.); +#404870 = EDGE_CURVE('',#404863,#404871,#404873,.T.); +#404871 = VERTEX_POINT('',#404872); +#404872 = CARTESIAN_POINT('',(133.451472,-118.279764,0.)); +#404873 = CIRCLE('',#404874,1.589052789649E-02); +#404874 = AXIS2_PLACEMENT_3D('',#404875,#404876,#404877); +#404875 = CARTESIAN_POINT('',(133.43600370232,-118.2834027695,0.)); +#404876 = DIRECTION('',(0.,0.,-1.)); +#404877 = DIRECTION('',(0.698799797522,0.71531730231,0.)); +#404878 = ORIENTED_EDGE('',*,*,#404879,.T.); +#404879 = EDGE_CURVE('',#404871,#404880,#404882,.T.); +#404880 = VERTEX_POINT('',#404881); +#404881 = CARTESIAN_POINT('',(133.451743,-118.280419,0.)); +#404882 = LINE('',#404883,#404884); +#404883 = CARTESIAN_POINT('',(133.451472,-118.279764,0.)); +#404884 = VECTOR('',#404885,1.); +#404885 = DIRECTION('',(0.382310257894,-0.924034018156,0.)); +#404886 = ORIENTED_EDGE('',*,*,#404887,.T.); +#404887 = EDGE_CURVE('',#404880,#404888,#404890,.T.); +#404888 = VERTEX_POINT('',#404889); +#404889 = CARTESIAN_POINT('',(133.452743,-118.283419,0.)); +#404890 = LINE('',#404891,#404892); +#404891 = CARTESIAN_POINT('',(133.451743,-118.280419,0.)); +#404892 = VECTOR('',#404893,1.); +#404893 = DIRECTION('',(0.316227766018,-0.94868329805,0.)); +#404894 = ORIENTED_EDGE('',*,*,#404895,.T.); +#404895 = EDGE_CURVE('',#404888,#404896,#404898,.T.); +#404896 = VERTEX_POINT('',#404897); +#404897 = CARTESIAN_POINT('',(133.453,-118.285,0.)); +#404898 = LINE('',#404899,#404900); +#404899 = CARTESIAN_POINT('',(133.452743,-118.283419,0.)); +#404900 = VECTOR('',#404901,1.); +#404901 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#404902 = ORIENTED_EDGE('',*,*,#404903,.T.); +#404903 = EDGE_CURVE('',#404896,#404904,#404906,.T.); +#404904 = VERTEX_POINT('',#404905); +#404905 = CARTESIAN_POINT('',(133.454,-118.29,0.)); +#404906 = LINE('',#404907,#404908); +#404907 = CARTESIAN_POINT('',(133.453,-118.285,0.)); +#404908 = VECTOR('',#404909,1.); +#404909 = DIRECTION('',(0.196116135139,-0.980580675691,0.)); +#404910 = ORIENTED_EDGE('',*,*,#404911,.T.); +#404911 = EDGE_CURVE('',#404904,#404912,#404914,.T.); +#404912 = VERTEX_POINT('',#404913); +#404913 = CARTESIAN_POINT('',(133.454,-118.29119,0.)); +#404914 = LINE('',#404915,#404916); +#404915 = CARTESIAN_POINT('',(133.454,-118.29,0.)); +#404916 = VECTOR('',#404917,1.); +#404917 = DIRECTION('',(0.,-1.,0.)); +#404918 = ORIENTED_EDGE('',*,*,#404919,.T.); +#404919 = EDGE_CURVE('',#404912,#404920,#404922,.T.); +#404920 = VERTEX_POINT('',#404921); +#404921 = CARTESIAN_POINT('',(133.454743,-118.293419,0.)); +#404922 = LINE('',#404923,#404924); +#404923 = CARTESIAN_POINT('',(133.454,-118.29119,0.)); +#404924 = VECTOR('',#404925,1.); +#404925 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#404926 = ORIENTED_EDGE('',*,*,#404927,.T.); +#404927 = EDGE_CURVE('',#404920,#404928,#404930,.T.); +#404928 = VERTEX_POINT('',#404929); +#404929 = CARTESIAN_POINT('',(133.455,-118.295,0.)); +#404930 = LINE('',#404931,#404932); +#404931 = CARTESIAN_POINT('',(133.454743,-118.293419,0.)); +#404932 = VECTOR('',#404933,1.); +#404933 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#404934 = ORIENTED_EDGE('',*,*,#404935,.T.); +#404935 = EDGE_CURVE('',#404928,#404936,#404938,.T.); +#404936 = VERTEX_POINT('',#404937); +#404937 = CARTESIAN_POINT('',(133.455,-119.705,0.)); +#404938 = LINE('',#404939,#404940); +#404939 = CARTESIAN_POINT('',(133.455,-118.295,0.)); +#404940 = VECTOR('',#404941,1.); +#404941 = DIRECTION('',(0.,-1.,0.)); +#404942 = ORIENTED_EDGE('',*,*,#404943,.T.); +#404943 = EDGE_CURVE('',#404936,#404944,#404946,.T.); +#404944 = VERTEX_POINT('',#404945); +#404945 = CARTESIAN_POINT('',(133.454743,-119.706581,0.)); +#404946 = LINE('',#404947,#404948); +#404947 = CARTESIAN_POINT('',(133.455,-119.705,0.)); +#404948 = VECTOR('',#404949,1.); +#404949 = DIRECTION('',(-0.160449291422,-0.987044084569,0.)); +#404950 = ORIENTED_EDGE('',*,*,#404951,.T.); +#404951 = EDGE_CURVE('',#404944,#404952,#404954,.T.); +#404952 = VERTEX_POINT('',#404953); +#404953 = CARTESIAN_POINT('',(133.453743,-119.711581,0.)); +#404954 = LINE('',#404955,#404956); +#404955 = CARTESIAN_POINT('',(133.454743,-119.706581,0.)); +#404956 = VECTOR('',#404957,1.); +#404957 = DIRECTION('',(-0.196116135139,-0.980580675691,0.)); +#404958 = ORIENTED_EDGE('',*,*,#404959,.T.); +#404959 = EDGE_CURVE('',#404952,#404960,#404962,.T.); +#404960 = VERTEX_POINT('',#404961); +#404961 = CARTESIAN_POINT('',(133.453,-119.71381,0.)); +#404962 = LINE('',#404963,#404964); +#404963 = CARTESIAN_POINT('',(133.453743,-119.711581,0.)); +#404964 = VECTOR('',#404965,1.); +#404965 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#404966 = ORIENTED_EDGE('',*,*,#404967,.T.); +#404967 = EDGE_CURVE('',#404960,#404968,#404970,.T.); +#404968 = VERTEX_POINT('',#404969); +#404969 = CARTESIAN_POINT('',(133.451472,-119.720236,0.)); +#404970 = LINE('',#404971,#404972); +#404971 = CARTESIAN_POINT('',(133.453,-119.71381,0.)); +#404972 = VECTOR('',#404973,1.); +#404973 = DIRECTION('',(-0.231333968374,-0.972874398407,0.)); +#404974 = ORIENTED_EDGE('',*,*,#404975,.T.); +#404975 = EDGE_CURVE('',#404968,#404976,#404978,.T.); +#404976 = VERTEX_POINT('',#404977); +#404977 = CARTESIAN_POINT('',(133.45063,-119.72192,0.)); +#404978 = LINE('',#404979,#404980); +#404979 = CARTESIAN_POINT('',(133.451472,-119.720236,0.)); +#404980 = VECTOR('',#404981,1.); +#404981 = DIRECTION('',(-0.447213595503,-0.894427190998,0.)); +#404982 = ORIENTED_EDGE('',*,*,#404983,.T.); +#404983 = EDGE_CURVE('',#404976,#404984,#404986,.T.); +#404984 = VERTEX_POINT('',#404985); +#404985 = CARTESIAN_POINT('',(133.446472,-119.729236,0.)); +#404986 = LINE('',#404987,#404988); +#404987 = CARTESIAN_POINT('',(133.45063,-119.72192,0.)); +#404988 = VECTOR('',#404989,1.); +#404989 = DIRECTION('',(-0.494115571158,-0.86939622862,0.)); +#404990 = ORIENTED_EDGE('',*,*,#404991,.T.); +#404991 = EDGE_CURVE('',#404984,#404992,#404994,.T.); +#404992 = VERTEX_POINT('',#404993); +#404993 = CARTESIAN_POINT('',(133.445536,-119.730536,0.)); +#404994 = LINE('',#404995,#404996); +#404995 = CARTESIAN_POINT('',(133.446472,-119.729236,0.)); +#404996 = VECTOR('',#404997,1.); +#404997 = DIRECTION('',(-0.584304725843,-0.811534341453,0.)); +#404998 = ORIENTED_EDGE('',*,*,#404999,.T.); +#404999 = EDGE_CURVE('',#404992,#405000,#405002,.T.); +#405000 = VERTEX_POINT('',#405001); +#405001 = CARTESIAN_POINT('',(133.442536,-119.734536,0.)); +#405002 = LINE('',#405003,#405004); +#405003 = CARTESIAN_POINT('',(133.445536,-119.730536,0.)); +#405004 = VECTOR('',#405005,1.); +#405005 = DIRECTION('',(-0.600000000001,-0.799999999999,0.)); +#405006 = ORIENTED_EDGE('',*,*,#405007,.T.); +#405007 = EDGE_CURVE('',#405000,#405008,#405010,.T.); +#405008 = VERTEX_POINT('',#405009); +#405009 = CARTESIAN_POINT('',(133.434536,-119.742536,0.)); +#405010 = LINE('',#405011,#405012); +#405011 = CARTESIAN_POINT('',(133.442536,-119.734536,0.)); +#405012 = VECTOR('',#405013,1.); +#405013 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#405014 = ORIENTED_EDGE('',*,*,#405015,.T.); +#405015 = EDGE_CURVE('',#405008,#405016,#405018,.T.); +#405016 = VERTEX_POINT('',#405017); +#405017 = CARTESIAN_POINT('',(133.433236,-119.743472,0.)); +#405018 = LINE('',#405019,#405020); +#405019 = CARTESIAN_POINT('',(133.434536,-119.742536,0.)); +#405020 = VECTOR('',#405021,1.); +#405021 = DIRECTION('',(-0.811534341456,-0.584304725839,0.)); +#405022 = ORIENTED_EDGE('',*,*,#405023,.T.); +#405023 = EDGE_CURVE('',#405016,#405024,#405026,.T.); +#405024 = VERTEX_POINT('',#405025); +#405025 = CARTESIAN_POINT('',(133.429236,-119.746472,0.)); +#405026 = LINE('',#405027,#405028); +#405027 = CARTESIAN_POINT('',(133.433236,-119.743472,0.)); +#405028 = VECTOR('',#405029,1.); +#405029 = DIRECTION('',(-0.799999999999,-0.600000000001,0.)); +#405030 = ORIENTED_EDGE('',*,*,#405031,.T.); +#405031 = EDGE_CURVE('',#405024,#405032,#405034,.T.); +#405032 = VERTEX_POINT('',#405033); +#405033 = CARTESIAN_POINT('',(133.427964,-119.747108,0.)); +#405034 = LINE('',#405035,#405036); +#405035 = CARTESIAN_POINT('',(133.429236,-119.746472,0.)); +#405036 = VECTOR('',#405037,1.); +#405037 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#405038 = ORIENTED_EDGE('',*,*,#405039,.T.); +#405039 = EDGE_CURVE('',#405032,#405040,#405042,.T.); +#405040 = VERTEX_POINT('',#405041); +#405041 = CARTESIAN_POINT('',(133.420236,-119.751472,0.)); +#405042 = CIRCLE('',#405043,1.589052789719E-02); +#405043 = AXIS2_PLACEMENT_3D('',#405044,#405045,#405046); +#405044 = CARTESIAN_POINT('',(133.41659723045,-119.7360037023,0.)); +#405045 = DIRECTION('',(0.,0.,-1.)); +#405046 = DIRECTION('',(0.7153173023,-0.698799797531,0.)); +#405047 = ORIENTED_EDGE('',*,*,#405048,.T.); +#405048 = EDGE_CURVE('',#405040,#405049,#405051,.T.); +#405049 = VERTEX_POINT('',#405050); +#405050 = CARTESIAN_POINT('',(133.419581,-119.751743,0.)); +#405051 = LINE('',#405052,#405053); +#405052 = CARTESIAN_POINT('',(133.420236,-119.751472,0.)); +#405053 = VECTOR('',#405054,1.); +#405054 = DIRECTION('',(-0.924034018156,-0.382310257894,0.)); +#405055 = ORIENTED_EDGE('',*,*,#405056,.T.); +#405056 = EDGE_CURVE('',#405049,#405057,#405059,.T.); +#405057 = VERTEX_POINT('',#405058); +#405058 = CARTESIAN_POINT('',(133.416581,-119.752743,0.)); +#405059 = LINE('',#405060,#405061); +#405060 = CARTESIAN_POINT('',(133.419581,-119.751743,0.)); +#405061 = VECTOR('',#405062,1.); +#405062 = DIRECTION('',(-0.948683298051,-0.316227766015,0.)); +#405063 = ORIENTED_EDGE('',*,*,#405064,.T.); +#405064 = EDGE_CURVE('',#405057,#405065,#405067,.T.); +#405065 = VERTEX_POINT('',#405066); +#405066 = CARTESIAN_POINT('',(133.415,-119.753,0.)); +#405067 = LINE('',#405068,#405069); +#405068 = CARTESIAN_POINT('',(133.416581,-119.752743,0.)); +#405069 = VECTOR('',#405070,1.); +#405070 = DIRECTION('',(-0.987044084569,-0.160449291421,0.)); +#405071 = ORIENTED_EDGE('',*,*,#405072,.T.); +#405072 = EDGE_CURVE('',#405065,#405073,#405075,.T.); +#405073 = VERTEX_POINT('',#405074); +#405074 = CARTESIAN_POINT('',(133.41,-119.754,0.)); +#405075 = LINE('',#405076,#405077); +#405076 = CARTESIAN_POINT('',(133.415,-119.753,0.)); +#405077 = VECTOR('',#405078,1.); +#405078 = DIRECTION('',(-0.980580675691,-0.196116135139,0.)); +#405079 = ORIENTED_EDGE('',*,*,#405080,.T.); +#405080 = EDGE_CURVE('',#405073,#405081,#405083,.T.); +#405081 = VERTEX_POINT('',#405082); +#405082 = CARTESIAN_POINT('',(133.40881,-119.754,0.)); +#405083 = LINE('',#405084,#405085); +#405084 = CARTESIAN_POINT('',(133.41,-119.754,0.)); +#405085 = VECTOR('',#405086,1.); +#405086 = DIRECTION('',(-1.,0.,0.)); +#405087 = ORIENTED_EDGE('',*,*,#405088,.T.); +#405088 = EDGE_CURVE('',#405081,#405089,#405091,.T.); +#405089 = VERTEX_POINT('',#405090); +#405090 = CARTESIAN_POINT('',(133.406581,-119.754743,0.)); +#405091 = LINE('',#405092,#405093); +#405092 = CARTESIAN_POINT('',(133.40881,-119.754,0.)); +#405093 = VECTOR('',#405094,1.); +#405094 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#405095 = ORIENTED_EDGE('',*,*,#405096,.T.); +#405096 = EDGE_CURVE('',#405089,#405097,#405099,.T.); +#405097 = VERTEX_POINT('',#405098); +#405098 = CARTESIAN_POINT('',(133.405,-119.755,0.)); +#405099 = LINE('',#405100,#405101); +#405100 = CARTESIAN_POINT('',(133.406581,-119.754743,0.)); +#405101 = VECTOR('',#405102,1.); +#405102 = DIRECTION('',(-0.98704408457,-0.160449291415,0.)); +#405103 = ORIENTED_EDGE('',*,*,#405104,.T.); +#405104 = EDGE_CURVE('',#405097,#405105,#405107,.T.); +#405105 = VERTEX_POINT('',#405106); +#405106 = CARTESIAN_POINT('',(132.595,-119.755,0.)); +#405107 = LINE('',#405108,#405109); +#405108 = CARTESIAN_POINT('',(133.405,-119.755,0.)); +#405109 = VECTOR('',#405110,1.); +#405110 = DIRECTION('',(-1.,0.,0.)); +#405111 = ORIENTED_EDGE('',*,*,#405112,.T.); +#405112 = EDGE_CURVE('',#405105,#405113,#405115,.T.); +#405113 = VERTEX_POINT('',#405114); +#405114 = CARTESIAN_POINT('',(132.593419,-119.754743,0.)); +#405115 = LINE('',#405116,#405117); +#405116 = CARTESIAN_POINT('',(132.595,-119.755,0.)); +#405117 = VECTOR('',#405118,1.); +#405118 = DIRECTION('',(-0.98704408457,0.160449291415,0.)); +#405119 = ORIENTED_EDGE('',*,*,#405120,.T.); +#405120 = EDGE_CURVE('',#405113,#405121,#405123,.T.); +#405121 = VERTEX_POINT('',#405122); +#405122 = CARTESIAN_POINT('',(132.588419,-119.753743,0.)); +#405123 = LINE('',#405124,#405125); +#405124 = CARTESIAN_POINT('',(132.593419,-119.754743,0.)); +#405125 = VECTOR('',#405126,1.); +#405126 = DIRECTION('',(-0.980580675691,0.196116135138,0.)); +#405127 = ORIENTED_EDGE('',*,*,#405128,.T.); +#405128 = EDGE_CURVE('',#405121,#405129,#405131,.T.); +#405129 = VERTEX_POINT('',#405130); +#405130 = CARTESIAN_POINT('',(132.58619,-119.753,0.)); +#405131 = LINE('',#405132,#405133); +#405132 = CARTESIAN_POINT('',(132.588419,-119.753743,0.)); +#405133 = VECTOR('',#405134,1.); +#405134 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#405135 = ORIENTED_EDGE('',*,*,#405136,.T.); +#405136 = EDGE_CURVE('',#405129,#405137,#405139,.T.); +#405137 = VERTEX_POINT('',#405138); +#405138 = CARTESIAN_POINT('',(132.579764,-119.751472,0.)); +#405139 = LINE('',#405140,#405141); +#405140 = CARTESIAN_POINT('',(132.58619,-119.753,0.)); +#405141 = VECTOR('',#405142,1.); +#405142 = DIRECTION('',(-0.972874398407,0.231333968373,0.)); +#405143 = ORIENTED_EDGE('',*,*,#405144,.T.); +#405144 = EDGE_CURVE('',#405137,#405145,#405147,.T.); +#405145 = VERTEX_POINT('',#405146); +#405146 = CARTESIAN_POINT('',(132.57808,-119.75063,0.)); +#405147 = LINE('',#405148,#405149); +#405148 = CARTESIAN_POINT('',(132.579764,-119.751472,0.)); +#405149 = VECTOR('',#405150,1.); +#405150 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#405151 = ORIENTED_EDGE('',*,*,#405152,.T.); +#405152 = EDGE_CURVE('',#405145,#405153,#405155,.T.); +#405153 = VERTEX_POINT('',#405154); +#405154 = CARTESIAN_POINT('',(132.570764,-119.746472,0.)); +#405155 = LINE('',#405156,#405157); +#405156 = CARTESIAN_POINT('',(132.57808,-119.75063,0.)); +#405157 = VECTOR('',#405158,1.); +#405158 = DIRECTION('',(-0.86939622862,0.494115571159,0.)); +#405159 = ORIENTED_EDGE('',*,*,#405160,.T.); +#405160 = EDGE_CURVE('',#405153,#405161,#405163,.T.); +#405161 = VERTEX_POINT('',#405162); +#405162 = CARTESIAN_POINT('',(132.569464,-119.745536,0.)); +#405163 = LINE('',#405164,#405165); +#405164 = CARTESIAN_POINT('',(132.570764,-119.746472,0.)); +#405165 = VECTOR('',#405166,1.); +#405166 = DIRECTION('',(-0.81153434145,0.584304725847,0.)); +#405167 = ORIENTED_EDGE('',*,*,#405168,.T.); +#405168 = EDGE_CURVE('',#405161,#405169,#405171,.T.); +#405169 = VERTEX_POINT('',#405170); +#405170 = CARTESIAN_POINT('',(132.565464,-119.742536,0.)); +#405171 = LINE('',#405172,#405173); +#405172 = CARTESIAN_POINT('',(132.569464,-119.745536,0.)); +#405173 = VECTOR('',#405174,1.); +#405174 = DIRECTION('',(-0.800000000001,0.599999999998,0.)); +#405175 = ORIENTED_EDGE('',*,*,#405176,.T.); +#405176 = EDGE_CURVE('',#405169,#405177,#405179,.T.); +#405177 = VERTEX_POINT('',#405178); +#405178 = CARTESIAN_POINT('',(132.557464,-119.734536,0.)); +#405179 = LINE('',#405180,#405181); +#405180 = CARTESIAN_POINT('',(132.565464,-119.742536,0.)); +#405181 = VECTOR('',#405182,1.); +#405182 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#405183 = ORIENTED_EDGE('',*,*,#405184,.T.); +#405184 = EDGE_CURVE('',#405177,#405185,#405187,.T.); +#405185 = VERTEX_POINT('',#405186); +#405186 = CARTESIAN_POINT('',(132.556528,-119.733236,0.)); +#405187 = LINE('',#405188,#405189); +#405188 = CARTESIAN_POINT('',(132.557464,-119.734536,0.)); +#405189 = VECTOR('',#405190,1.); +#405190 = DIRECTION('',(-0.584304725855,0.811534341444,0.)); +#405191 = ORIENTED_EDGE('',*,*,#405192,.T.); +#405192 = EDGE_CURVE('',#405185,#405193,#405195,.T.); +#405193 = VERTEX_POINT('',#405194); +#405194 = CARTESIAN_POINT('',(132.553528,-119.729236,0.)); +#405195 = LINE('',#405196,#405197); +#405196 = CARTESIAN_POINT('',(132.556528,-119.733236,0.)); +#405197 = VECTOR('',#405198,1.); +#405198 = DIRECTION('',(-0.599999999998,0.800000000002,0.)); +#405199 = ORIENTED_EDGE('',*,*,#405200,.T.); +#405200 = EDGE_CURVE('',#405193,#405201,#405203,.T.); +#405201 = VERTEX_POINT('',#405202); +#405202 = CARTESIAN_POINT('',(132.552892,-119.727964,0.)); +#405203 = LINE('',#405204,#405205); +#405204 = CARTESIAN_POINT('',(132.553528,-119.729236,0.)); +#405205 = VECTOR('',#405206,1.); +#405206 = DIRECTION('',(-0.447213595492,0.894427191004,0.)); +#405207 = ORIENTED_EDGE('',*,*,#405208,.T.); +#405208 = EDGE_CURVE('',#405201,#405209,#405211,.T.); +#405209 = VERTEX_POINT('',#405210); +#405210 = CARTESIAN_POINT('',(132.548528,-119.720236,0.)); +#405211 = CIRCLE('',#405212,1.589052789649E-02); +#405212 = AXIS2_PLACEMENT_3D('',#405213,#405214,#405215); +#405213 = CARTESIAN_POINT('',(132.56399629767,-119.7165972304,0.)); +#405214 = DIRECTION('',(0.,0.,-1.)); +#405215 = DIRECTION('',(-0.698799797522,-0.71531730231,-0.)); +#405216 = ORIENTED_EDGE('',*,*,#405217,.T.); +#405217 = EDGE_CURVE('',#405209,#405218,#405220,.T.); +#405218 = VERTEX_POINT('',#405219); +#405219 = CARTESIAN_POINT('',(132.548257,-119.719581,0.)); +#405220 = LINE('',#405221,#405222); +#405221 = CARTESIAN_POINT('',(132.548528,-119.720236,0.)); +#405222 = VECTOR('',#405223,1.); +#405223 = DIRECTION('',(-0.382310257894,0.924034018156,0.)); +#405224 = ORIENTED_EDGE('',*,*,#405225,.T.); +#405225 = EDGE_CURVE('',#405218,#405226,#405228,.T.); +#405226 = VERTEX_POINT('',#405227); +#405227 = CARTESIAN_POINT('',(132.547257,-119.716581,0.)); +#405228 = LINE('',#405229,#405230); +#405229 = CARTESIAN_POINT('',(132.548257,-119.719581,0.)); +#405230 = VECTOR('',#405231,1.); +#405231 = DIRECTION('',(-0.316227766018,0.94868329805,0.)); +#405232 = ORIENTED_EDGE('',*,*,#405233,.T.); +#405233 = EDGE_CURVE('',#405226,#405234,#405236,.T.); +#405234 = VERTEX_POINT('',#405235); +#405235 = CARTESIAN_POINT('',(132.547,-119.715,0.)); +#405236 = LINE('',#405237,#405238); +#405237 = CARTESIAN_POINT('',(132.547257,-119.716581,0.)); +#405238 = VECTOR('',#405239,1.); +#405239 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#405240 = ORIENTED_EDGE('',*,*,#405241,.T.); +#405241 = EDGE_CURVE('',#405234,#405242,#405244,.T.); +#405242 = VERTEX_POINT('',#405243); +#405243 = CARTESIAN_POINT('',(132.546,-119.71,0.)); +#405244 = LINE('',#405245,#405246); +#405245 = CARTESIAN_POINT('',(132.547,-119.715,0.)); +#405246 = VECTOR('',#405247,1.); +#405247 = DIRECTION('',(-0.196116135139,0.980580675691,0.)); +#405248 = ORIENTED_EDGE('',*,*,#405249,.T.); +#405249 = EDGE_CURVE('',#405242,#405250,#405252,.T.); +#405250 = VERTEX_POINT('',#405251); +#405251 = CARTESIAN_POINT('',(132.546,-119.70881,0.)); +#405252 = LINE('',#405253,#405254); +#405253 = CARTESIAN_POINT('',(132.546,-119.71,0.)); +#405254 = VECTOR('',#405255,1.); +#405255 = DIRECTION('',(0.,1.,0.)); +#405256 = ORIENTED_EDGE('',*,*,#405257,.T.); +#405257 = EDGE_CURVE('',#405250,#405258,#405260,.T.); +#405258 = VERTEX_POINT('',#405259); +#405259 = CARTESIAN_POINT('',(132.545257,-119.706581,0.)); +#405260 = LINE('',#405261,#405262); +#405261 = CARTESIAN_POINT('',(132.546,-119.70881,0.)); +#405262 = VECTOR('',#405263,1.); +#405263 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#405264 = ORIENTED_EDGE('',*,*,#405265,.T.); +#405265 = EDGE_CURVE('',#405258,#405266,#405268,.T.); +#405266 = VERTEX_POINT('',#405267); +#405267 = CARTESIAN_POINT('',(132.545,-119.705,0.)); +#405268 = LINE('',#405269,#405270); +#405269 = CARTESIAN_POINT('',(132.545257,-119.706581,0.)); +#405270 = VECTOR('',#405271,1.); +#405271 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#405272 = ORIENTED_EDGE('',*,*,#405273,.T.); +#405273 = EDGE_CURVE('',#405266,#405274,#405276,.T.); +#405274 = VERTEX_POINT('',#405275); +#405275 = CARTESIAN_POINT('',(132.545,-118.295,0.)); +#405276 = LINE('',#405277,#405278); +#405277 = CARTESIAN_POINT('',(132.545,-119.705,0.)); +#405278 = VECTOR('',#405279,1.); +#405279 = DIRECTION('',(0.,1.,0.)); +#405280 = ORIENTED_EDGE('',*,*,#405281,.T.); +#405281 = EDGE_CURVE('',#405274,#405282,#405284,.T.); +#405282 = VERTEX_POINT('',#405283); +#405283 = CARTESIAN_POINT('',(132.545257,-118.293419,0.)); +#405284 = LINE('',#405285,#405286); +#405285 = CARTESIAN_POINT('',(132.545,-118.295,0.)); +#405286 = VECTOR('',#405287,1.); +#405287 = DIRECTION('',(0.160449291422,0.987044084569,0.)); +#405288 = ORIENTED_EDGE('',*,*,#405289,.T.); +#405289 = EDGE_CURVE('',#405282,#405290,#405292,.T.); +#405290 = VERTEX_POINT('',#405291); +#405291 = CARTESIAN_POINT('',(132.546257,-118.288419,0.)); +#405292 = LINE('',#405293,#405294); +#405293 = CARTESIAN_POINT('',(132.545257,-118.293419,0.)); +#405294 = VECTOR('',#405295,1.); +#405295 = DIRECTION('',(0.196116135139,0.980580675691,0.)); +#405296 = ORIENTED_EDGE('',*,*,#405297,.T.); +#405297 = EDGE_CURVE('',#405290,#405298,#405300,.T.); +#405298 = VERTEX_POINT('',#405299); +#405299 = CARTESIAN_POINT('',(132.547,-118.28619,0.)); +#405300 = LINE('',#405301,#405302); +#405301 = CARTESIAN_POINT('',(132.546257,-118.288419,0.)); +#405302 = VECTOR('',#405303,1.); +#405303 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#405304 = ORIENTED_EDGE('',*,*,#405305,.T.); +#405305 = EDGE_CURVE('',#405298,#405306,#405308,.T.); +#405306 = VERTEX_POINT('',#405307); +#405307 = CARTESIAN_POINT('',(132.548528,-118.279764,0.)); +#405308 = LINE('',#405309,#405310); +#405309 = CARTESIAN_POINT('',(132.547,-118.28619,0.)); +#405310 = VECTOR('',#405311,1.); +#405311 = DIRECTION('',(0.231333968374,0.972874398407,0.)); +#405312 = ORIENTED_EDGE('',*,*,#405313,.T.); +#405313 = EDGE_CURVE('',#405306,#405314,#405316,.T.); +#405314 = VERTEX_POINT('',#405315); +#405315 = CARTESIAN_POINT('',(132.54937,-118.27808,0.)); +#405316 = LINE('',#405317,#405318); +#405317 = CARTESIAN_POINT('',(132.548528,-118.279764,0.)); +#405318 = VECTOR('',#405319,1.); +#405319 = DIRECTION('',(0.447213595503,0.894427190998,0.)); +#405320 = ORIENTED_EDGE('',*,*,#405321,.T.); +#405321 = EDGE_CURVE('',#405314,#405322,#405324,.T.); +#405322 = VERTEX_POINT('',#405323); +#405323 = CARTESIAN_POINT('',(132.553528,-118.270764,0.)); +#405324 = LINE('',#405325,#405326); +#405325 = CARTESIAN_POINT('',(132.54937,-118.27808,0.)); +#405326 = VECTOR('',#405327,1.); +#405327 = DIRECTION('',(0.494115571158,0.86939622862,0.)); +#405328 = ORIENTED_EDGE('',*,*,#405329,.T.); +#405329 = EDGE_CURVE('',#405322,#405330,#405332,.T.); +#405330 = VERTEX_POINT('',#405331); +#405331 = CARTESIAN_POINT('',(132.554464,-118.269464,0.)); +#405332 = LINE('',#405333,#405334); +#405333 = CARTESIAN_POINT('',(132.553528,-118.270764,0.)); +#405334 = VECTOR('',#405335,1.); +#405335 = DIRECTION('',(0.584304725843,0.811534341453,0.)); +#405336 = ORIENTED_EDGE('',*,*,#405337,.T.); +#405337 = EDGE_CURVE('',#405330,#405338,#405340,.T.); +#405338 = VERTEX_POINT('',#405339); +#405339 = CARTESIAN_POINT('',(132.557464,-118.265464,0.)); +#405340 = LINE('',#405341,#405342); +#405341 = CARTESIAN_POINT('',(132.554464,-118.269464,0.)); +#405342 = VECTOR('',#405343,1.); +#405343 = DIRECTION('',(0.600000000001,0.799999999999,0.)); +#405344 = ORIENTED_EDGE('',*,*,#405345,.T.); +#405345 = EDGE_CURVE('',#405338,#405346,#405348,.T.); +#405346 = VERTEX_POINT('',#405347); +#405347 = CARTESIAN_POINT('',(132.565464,-118.257464,0.)); +#405348 = LINE('',#405349,#405350); +#405349 = CARTESIAN_POINT('',(132.557464,-118.265464,0.)); +#405350 = VECTOR('',#405351,1.); +#405351 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#405352 = ORIENTED_EDGE('',*,*,#405353,.T.); +#405353 = EDGE_CURVE('',#405346,#405354,#405356,.T.); +#405354 = VERTEX_POINT('',#405355); +#405355 = CARTESIAN_POINT('',(132.566764,-118.256528,0.)); +#405356 = LINE('',#405357,#405358); +#405357 = CARTESIAN_POINT('',(132.565464,-118.257464,0.)); +#405358 = VECTOR('',#405359,1.); +#405359 = DIRECTION('',(0.811534341456,0.584304725839,0.)); +#405360 = ORIENTED_EDGE('',*,*,#405361,.T.); +#405361 = EDGE_CURVE('',#405354,#405362,#405364,.T.); +#405362 = VERTEX_POINT('',#405363); +#405363 = CARTESIAN_POINT('',(132.570764,-118.253528,0.)); +#405364 = LINE('',#405365,#405366); +#405365 = CARTESIAN_POINT('',(132.566764,-118.256528,0.)); +#405366 = VECTOR('',#405367,1.); +#405367 = DIRECTION('',(0.799999999999,0.600000000001,0.)); +#405368 = ORIENTED_EDGE('',*,*,#405369,.T.); +#405369 = EDGE_CURVE('',#405362,#405370,#405372,.T.); +#405370 = VERTEX_POINT('',#405371); +#405371 = CARTESIAN_POINT('',(132.572036,-118.252892,0.)); +#405372 = LINE('',#405373,#405374); +#405373 = CARTESIAN_POINT('',(132.570764,-118.253528,0.)); +#405374 = VECTOR('',#405375,1.); +#405375 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#405376 = ORIENTED_EDGE('',*,*,#405377,.T.); +#405377 = EDGE_CURVE('',#405370,#405378,#405380,.T.); +#405378 = VERTEX_POINT('',#405379); +#405379 = CARTESIAN_POINT('',(132.579764,-118.248528,0.)); +#405380 = CIRCLE('',#405381,1.589052789719E-02); +#405381 = AXIS2_PLACEMENT_3D('',#405382,#405383,#405384); +#405382 = CARTESIAN_POINT('',(132.58340276954,-118.2639962976,0.)); +#405383 = DIRECTION('',(0.,0.,-1.)); +#405384 = DIRECTION('',(-0.7153173023,0.698799797531,0.)); +#405385 = ORIENTED_EDGE('',*,*,#405386,.T.); +#405386 = EDGE_CURVE('',#405378,#405387,#405389,.T.); +#405387 = VERTEX_POINT('',#405388); +#405388 = CARTESIAN_POINT('',(132.580419,-118.248257,0.)); +#405389 = LINE('',#405390,#405391); +#405390 = CARTESIAN_POINT('',(132.579764,-118.248528,0.)); +#405391 = VECTOR('',#405392,1.); +#405392 = DIRECTION('',(0.924034018156,0.382310257894,0.)); +#405393 = ORIENTED_EDGE('',*,*,#405394,.T.); +#405394 = EDGE_CURVE('',#405387,#405395,#405397,.T.); +#405395 = VERTEX_POINT('',#405396); +#405396 = CARTESIAN_POINT('',(132.583419,-118.247257,0.)); +#405397 = LINE('',#405398,#405399); +#405398 = CARTESIAN_POINT('',(132.580419,-118.248257,0.)); +#405399 = VECTOR('',#405400,1.); +#405400 = DIRECTION('',(0.948683298051,0.316227766015,0.)); +#405401 = ORIENTED_EDGE('',*,*,#405402,.T.); +#405402 = EDGE_CURVE('',#405395,#405403,#405405,.T.); +#405403 = VERTEX_POINT('',#405404); +#405404 = CARTESIAN_POINT('',(132.585,-118.247,0.)); +#405405 = LINE('',#405406,#405407); +#405406 = CARTESIAN_POINT('',(132.583419,-118.247257,0.)); +#405407 = VECTOR('',#405408,1.); +#405408 = DIRECTION('',(0.987044084569,0.160449291421,0.)); +#405409 = ORIENTED_EDGE('',*,*,#405410,.T.); +#405410 = EDGE_CURVE('',#405403,#405411,#405413,.T.); +#405411 = VERTEX_POINT('',#405412); +#405412 = CARTESIAN_POINT('',(132.59,-118.246,0.)); +#405413 = LINE('',#405414,#405415); +#405414 = CARTESIAN_POINT('',(132.585,-118.247,0.)); +#405415 = VECTOR('',#405416,1.); +#405416 = DIRECTION('',(0.980580675691,0.196116135139,0.)); +#405417 = ORIENTED_EDGE('',*,*,#405418,.T.); +#405418 = EDGE_CURVE('',#405411,#404711,#405419,.T.); +#405419 = LINE('',#405420,#405421); +#405420 = CARTESIAN_POINT('',(132.59,-118.246,0.)); +#405421 = VECTOR('',#405422,1.); +#405422 = DIRECTION('',(1.,0.,0.)); +#405423 = ORIENTED_EDGE('',*,*,#404727,.T.); +#405424 = FACE_BOUND('',#405425,.F.); +#405425 = EDGE_LOOP('',(#405426)); +#405426 = ORIENTED_EDGE('',*,*,#405427,.F.); +#405427 = EDGE_CURVE('',#405428,#405428,#405430,.T.); +#405428 = VERTEX_POINT('',#405429); +#405429 = CARTESIAN_POINT('',(133.,-119.575,0.)); +#405430 = CIRCLE('',#405431,7.499999999999E-02); +#405431 = AXIS2_PLACEMENT_3D('',#405432,#405433,#405434); +#405432 = CARTESIAN_POINT('',(133.,-119.5,0.)); +#405433 = DIRECTION('',(-0.,0.,-1.)); +#405434 = DIRECTION('',(-0.,-1.,0.)); +#405435 = FACE_BOUND('',#405436,.F.); +#405436 = EDGE_LOOP('',(#405437)); +#405437 = ORIENTED_EDGE('',*,*,#405438,.F.); +#405438 = EDGE_CURVE('',#405439,#405439,#405441,.T.); +#405439 = VERTEX_POINT('',#405440); +#405440 = CARTESIAN_POINT('',(133.,-118.575,0.)); +#405441 = CIRCLE('',#405442,7.499999999999E-02); +#405442 = AXIS2_PLACEMENT_3D('',#405443,#405444,#405445); +#405443 = CARTESIAN_POINT('',(133.,-118.5,0.)); +#405444 = DIRECTION('',(-0.,0.,-1.)); +#405445 = DIRECTION('',(-0.,-1.,0.)); +#405446 = PLANE('',#405447); +#405447 = AXIS2_PLACEMENT_3D('',#405448,#405449,#405450); +#405448 = CARTESIAN_POINT('',(0.,0.,0.)); +#405449 = DIRECTION('',(-0.,-0.,-1.)); +#405450 = DIRECTION('',(-1.,0.,0.)); +#405451 = ADVANCED_FACE('',(#405452,#406107,#406118),#406129,.T.); +#405452 = FACE_BOUND('',#405453,.T.); +#405453 = EDGE_LOOP('',(#405454,#405455,#405456,#405464,#405472,#405480, + #405488,#405496,#405504,#405512,#405520,#405528,#405536,#405544, + #405552,#405561,#405569,#405577,#405585,#405593,#405601,#405609, + #405617,#405625,#405633,#405641,#405649,#405657,#405665,#405673, + #405681,#405689,#405697,#405705,#405713,#405721,#405730,#405738, + #405746,#405754,#405762,#405770,#405778,#405786,#405794,#405802, + #405810,#405818,#405826,#405834,#405842,#405850,#405858,#405866, + #405874,#405882,#405890,#405899,#405907,#405915,#405923,#405931, + #405939,#405947,#405955,#405963,#405971,#405979,#405987,#405995, + #406003,#406011,#406019,#406027,#406035,#406043,#406051,#406059, + #406068,#406076,#406084,#406092,#406100,#406106)); +#405454 = ORIENTED_EDGE('',*,*,#404680,.T.); +#405455 = ORIENTED_EDGE('',*,*,#404742,.T.); +#405456 = ORIENTED_EDGE('',*,*,#405457,.T.); +#405457 = EDGE_CURVE('',#404743,#405458,#405460,.T.); +#405458 = VERTEX_POINT('',#405459); +#405459 = CARTESIAN_POINT('',(133.406581,-118.245257,-4.E-02)); +#405460 = LINE('',#405461,#405462); +#405461 = CARTESIAN_POINT('',(133.405,-118.245,-4.E-02)); +#405462 = VECTOR('',#405463,1.); +#405463 = DIRECTION('',(0.98704408457,-0.160449291415,0.)); +#405464 = ORIENTED_EDGE('',*,*,#405465,.T.); +#405465 = EDGE_CURVE('',#405458,#405466,#405468,.T.); +#405466 = VERTEX_POINT('',#405467); +#405467 = CARTESIAN_POINT('',(133.411581,-118.246257,-4.E-02)); +#405468 = LINE('',#405469,#405470); +#405469 = CARTESIAN_POINT('',(133.406581,-118.245257,-4.E-02)); +#405470 = VECTOR('',#405471,1.); +#405471 = DIRECTION('',(0.980580675691,-0.196116135138,0.)); +#405472 = ORIENTED_EDGE('',*,*,#405473,.T.); +#405473 = EDGE_CURVE('',#405466,#405474,#405476,.T.); +#405474 = VERTEX_POINT('',#405475); +#405475 = CARTESIAN_POINT('',(133.41381,-118.247,-4.E-02)); +#405476 = LINE('',#405477,#405478); +#405477 = CARTESIAN_POINT('',(133.411581,-118.246257,-4.E-02)); +#405478 = VECTOR('',#405479,1.); +#405479 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#405480 = ORIENTED_EDGE('',*,*,#405481,.T.); +#405481 = EDGE_CURVE('',#405474,#405482,#405484,.T.); +#405482 = VERTEX_POINT('',#405483); +#405483 = CARTESIAN_POINT('',(133.420236,-118.248528,-4.E-02)); +#405484 = LINE('',#405485,#405486); +#405485 = CARTESIAN_POINT('',(133.41381,-118.247,-4.E-02)); +#405486 = VECTOR('',#405487,1.); +#405487 = DIRECTION('',(0.972874398407,-0.231333968373,0.)); +#405488 = ORIENTED_EDGE('',*,*,#405489,.T.); +#405489 = EDGE_CURVE('',#405482,#405490,#405492,.T.); +#405490 = VERTEX_POINT('',#405491); +#405491 = CARTESIAN_POINT('',(133.42192,-118.24937,-4.E-02)); +#405492 = LINE('',#405493,#405494); +#405493 = CARTESIAN_POINT('',(133.420236,-118.248528,-4.E-02)); +#405494 = VECTOR('',#405495,1.); +#405495 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#405496 = ORIENTED_EDGE('',*,*,#405497,.T.); +#405497 = EDGE_CURVE('',#405490,#405498,#405500,.T.); +#405498 = VERTEX_POINT('',#405499); +#405499 = CARTESIAN_POINT('',(133.429236,-118.253528,-4.E-02)); +#405500 = LINE('',#405501,#405502); +#405501 = CARTESIAN_POINT('',(133.42192,-118.24937,-4.E-02)); +#405502 = VECTOR('',#405503,1.); +#405503 = DIRECTION('',(0.86939622862,-0.494115571159,0.)); +#405504 = ORIENTED_EDGE('',*,*,#405505,.T.); +#405505 = EDGE_CURVE('',#405498,#405506,#405508,.T.); +#405506 = VERTEX_POINT('',#405507); +#405507 = CARTESIAN_POINT('',(133.430536,-118.254464,-4.E-02)); +#405508 = LINE('',#405509,#405510); +#405509 = CARTESIAN_POINT('',(133.429236,-118.253528,-4.E-02)); +#405510 = VECTOR('',#405511,1.); +#405511 = DIRECTION('',(0.81153434145,-0.584304725847,0.)); +#405512 = ORIENTED_EDGE('',*,*,#405513,.T.); +#405513 = EDGE_CURVE('',#405506,#405514,#405516,.T.); +#405514 = VERTEX_POINT('',#405515); +#405515 = CARTESIAN_POINT('',(133.434536,-118.257464,-4.E-02)); +#405516 = LINE('',#405517,#405518); +#405517 = CARTESIAN_POINT('',(133.430536,-118.254464,-4.E-02)); +#405518 = VECTOR('',#405519,1.); +#405519 = DIRECTION('',(0.800000000001,-0.599999999998,0.)); +#405520 = ORIENTED_EDGE('',*,*,#405521,.T.); +#405521 = EDGE_CURVE('',#405514,#405522,#405524,.T.); +#405522 = VERTEX_POINT('',#405523); +#405523 = CARTESIAN_POINT('',(133.442536,-118.265464,-4.E-02)); +#405524 = LINE('',#405525,#405526); +#405525 = CARTESIAN_POINT('',(133.434536,-118.257464,-4.E-02)); +#405526 = VECTOR('',#405527,1.); +#405527 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#405528 = ORIENTED_EDGE('',*,*,#405529,.T.); +#405529 = EDGE_CURVE('',#405522,#405530,#405532,.T.); +#405530 = VERTEX_POINT('',#405531); +#405531 = CARTESIAN_POINT('',(133.443472,-118.266764,-4.E-02)); +#405532 = LINE('',#405533,#405534); +#405533 = CARTESIAN_POINT('',(133.442536,-118.265464,-4.E-02)); +#405534 = VECTOR('',#405535,1.); +#405535 = DIRECTION('',(0.584304725855,-0.811534341444,0.)); +#405536 = ORIENTED_EDGE('',*,*,#405537,.T.); +#405537 = EDGE_CURVE('',#405530,#405538,#405540,.T.); +#405538 = VERTEX_POINT('',#405539); +#405539 = CARTESIAN_POINT('',(133.446472,-118.270764,-4.E-02)); +#405540 = LINE('',#405541,#405542); +#405541 = CARTESIAN_POINT('',(133.443472,-118.266764,-4.E-02)); +#405542 = VECTOR('',#405543,1.); +#405543 = DIRECTION('',(0.599999999998,-0.800000000002,0.)); +#405544 = ORIENTED_EDGE('',*,*,#405545,.T.); +#405545 = EDGE_CURVE('',#405538,#405546,#405548,.T.); +#405546 = VERTEX_POINT('',#405547); +#405547 = CARTESIAN_POINT('',(133.447108,-118.272036,-4.E-02)); +#405548 = LINE('',#405549,#405550); +#405549 = CARTESIAN_POINT('',(133.446472,-118.270764,-4.E-02)); +#405550 = VECTOR('',#405551,1.); +#405551 = DIRECTION('',(0.447213595492,-0.894427191004,0.)); +#405552 = ORIENTED_EDGE('',*,*,#405553,.T.); +#405553 = EDGE_CURVE('',#405546,#405554,#405556,.T.); +#405554 = VERTEX_POINT('',#405555); +#405555 = CARTESIAN_POINT('',(133.451472,-118.279764,-4.E-02)); +#405556 = CIRCLE('',#405557,1.589052789649E-02); +#405557 = AXIS2_PLACEMENT_3D('',#405558,#405559,#405560); +#405558 = CARTESIAN_POINT('',(133.43600370232,-118.2834027695,-4.E-02)); +#405559 = DIRECTION('',(0.,0.,-1.)); +#405560 = DIRECTION('',(0.698799797522,0.71531730231,0.)); +#405561 = ORIENTED_EDGE('',*,*,#405562,.T.); +#405562 = EDGE_CURVE('',#405554,#405563,#405565,.T.); +#405563 = VERTEX_POINT('',#405564); +#405564 = CARTESIAN_POINT('',(133.451743,-118.280419,-4.E-02)); +#405565 = LINE('',#405566,#405567); +#405566 = CARTESIAN_POINT('',(133.451472,-118.279764,-4.E-02)); +#405567 = VECTOR('',#405568,1.); +#405568 = DIRECTION('',(0.382310257894,-0.924034018156,0.)); +#405569 = ORIENTED_EDGE('',*,*,#405570,.T.); +#405570 = EDGE_CURVE('',#405563,#405571,#405573,.T.); +#405571 = VERTEX_POINT('',#405572); +#405572 = CARTESIAN_POINT('',(133.452743,-118.283419,-4.E-02)); +#405573 = LINE('',#405574,#405575); +#405574 = CARTESIAN_POINT('',(133.451743,-118.280419,-4.E-02)); +#405575 = VECTOR('',#405576,1.); +#405576 = DIRECTION('',(0.316227766018,-0.94868329805,0.)); +#405577 = ORIENTED_EDGE('',*,*,#405578,.T.); +#405578 = EDGE_CURVE('',#405571,#405579,#405581,.T.); +#405579 = VERTEX_POINT('',#405580); +#405580 = CARTESIAN_POINT('',(133.453,-118.285,-4.E-02)); +#405581 = LINE('',#405582,#405583); +#405582 = CARTESIAN_POINT('',(133.452743,-118.283419,-4.E-02)); +#405583 = VECTOR('',#405584,1.); +#405584 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#405585 = ORIENTED_EDGE('',*,*,#405586,.T.); +#405586 = EDGE_CURVE('',#405579,#405587,#405589,.T.); +#405587 = VERTEX_POINT('',#405588); +#405588 = CARTESIAN_POINT('',(133.454,-118.29,-4.E-02)); +#405589 = LINE('',#405590,#405591); +#405590 = CARTESIAN_POINT('',(133.453,-118.285,-4.E-02)); +#405591 = VECTOR('',#405592,1.); +#405592 = DIRECTION('',(0.196116135139,-0.980580675691,0.)); +#405593 = ORIENTED_EDGE('',*,*,#405594,.T.); +#405594 = EDGE_CURVE('',#405587,#405595,#405597,.T.); +#405595 = VERTEX_POINT('',#405596); +#405596 = CARTESIAN_POINT('',(133.454,-118.29119,-4.E-02)); +#405597 = LINE('',#405598,#405599); +#405598 = CARTESIAN_POINT('',(133.454,-118.29,-4.E-02)); +#405599 = VECTOR('',#405600,1.); +#405600 = DIRECTION('',(0.,-1.,0.)); +#405601 = ORIENTED_EDGE('',*,*,#405602,.T.); +#405602 = EDGE_CURVE('',#405595,#405603,#405605,.T.); +#405603 = VERTEX_POINT('',#405604); +#405604 = CARTESIAN_POINT('',(133.454743,-118.293419,-4.E-02)); +#405605 = LINE('',#405606,#405607); +#405606 = CARTESIAN_POINT('',(133.454,-118.29119,-4.E-02)); +#405607 = VECTOR('',#405608,1.); +#405608 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#405609 = ORIENTED_EDGE('',*,*,#405610,.T.); +#405610 = EDGE_CURVE('',#405603,#405611,#405613,.T.); +#405611 = VERTEX_POINT('',#405612); +#405612 = CARTESIAN_POINT('',(133.455,-118.295,-4.E-02)); +#405613 = LINE('',#405614,#405615); +#405614 = CARTESIAN_POINT('',(133.454743,-118.293419,-4.E-02)); +#405615 = VECTOR('',#405616,1.); +#405616 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#405617 = ORIENTED_EDGE('',*,*,#405618,.T.); +#405618 = EDGE_CURVE('',#405611,#405619,#405621,.T.); +#405619 = VERTEX_POINT('',#405620); +#405620 = CARTESIAN_POINT('',(133.455,-119.705,-4.E-02)); +#405621 = LINE('',#405622,#405623); +#405622 = CARTESIAN_POINT('',(133.455,-118.295,-4.E-02)); +#405623 = VECTOR('',#405624,1.); +#405624 = DIRECTION('',(0.,-1.,0.)); +#405625 = ORIENTED_EDGE('',*,*,#405626,.T.); +#405626 = EDGE_CURVE('',#405619,#405627,#405629,.T.); +#405627 = VERTEX_POINT('',#405628); +#405628 = CARTESIAN_POINT('',(133.454743,-119.706581,-4.E-02)); +#405629 = LINE('',#405630,#405631); +#405630 = CARTESIAN_POINT('',(133.455,-119.705,-4.E-02)); +#405631 = VECTOR('',#405632,1.); +#405632 = DIRECTION('',(-0.160449291422,-0.987044084569,0.)); +#405633 = ORIENTED_EDGE('',*,*,#405634,.T.); +#405634 = EDGE_CURVE('',#405627,#405635,#405637,.T.); +#405635 = VERTEX_POINT('',#405636); +#405636 = CARTESIAN_POINT('',(133.453743,-119.711581,-4.E-02)); +#405637 = LINE('',#405638,#405639); +#405638 = CARTESIAN_POINT('',(133.454743,-119.706581,-4.E-02)); +#405639 = VECTOR('',#405640,1.); +#405640 = DIRECTION('',(-0.196116135139,-0.980580675691,0.)); +#405641 = ORIENTED_EDGE('',*,*,#405642,.T.); +#405642 = EDGE_CURVE('',#405635,#405643,#405645,.T.); +#405643 = VERTEX_POINT('',#405644); +#405644 = CARTESIAN_POINT('',(133.453,-119.71381,-4.E-02)); +#405645 = LINE('',#405646,#405647); +#405646 = CARTESIAN_POINT('',(133.453743,-119.711581,-4.E-02)); +#405647 = VECTOR('',#405648,1.); +#405648 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#405649 = ORIENTED_EDGE('',*,*,#405650,.T.); +#405650 = EDGE_CURVE('',#405643,#405651,#405653,.T.); +#405651 = VERTEX_POINT('',#405652); +#405652 = CARTESIAN_POINT('',(133.451472,-119.720236,-4.E-02)); +#405653 = LINE('',#405654,#405655); +#405654 = CARTESIAN_POINT('',(133.453,-119.71381,-4.E-02)); +#405655 = VECTOR('',#405656,1.); +#405656 = DIRECTION('',(-0.231333968374,-0.972874398407,0.)); +#405657 = ORIENTED_EDGE('',*,*,#405658,.T.); +#405658 = EDGE_CURVE('',#405651,#405659,#405661,.T.); +#405659 = VERTEX_POINT('',#405660); +#405660 = CARTESIAN_POINT('',(133.45063,-119.72192,-4.E-02)); +#405661 = LINE('',#405662,#405663); +#405662 = CARTESIAN_POINT('',(133.451472,-119.720236,-4.E-02)); +#405663 = VECTOR('',#405664,1.); +#405664 = DIRECTION('',(-0.447213595503,-0.894427190998,0.)); +#405665 = ORIENTED_EDGE('',*,*,#405666,.T.); +#405666 = EDGE_CURVE('',#405659,#405667,#405669,.T.); +#405667 = VERTEX_POINT('',#405668); +#405668 = CARTESIAN_POINT('',(133.446472,-119.729236,-4.E-02)); +#405669 = LINE('',#405670,#405671); +#405670 = CARTESIAN_POINT('',(133.45063,-119.72192,-4.E-02)); +#405671 = VECTOR('',#405672,1.); +#405672 = DIRECTION('',(-0.494115571158,-0.86939622862,0.)); +#405673 = ORIENTED_EDGE('',*,*,#405674,.T.); +#405674 = EDGE_CURVE('',#405667,#405675,#405677,.T.); +#405675 = VERTEX_POINT('',#405676); +#405676 = CARTESIAN_POINT('',(133.445536,-119.730536,-4.E-02)); +#405677 = LINE('',#405678,#405679); +#405678 = CARTESIAN_POINT('',(133.446472,-119.729236,-4.E-02)); +#405679 = VECTOR('',#405680,1.); +#405680 = DIRECTION('',(-0.584304725843,-0.811534341453,0.)); +#405681 = ORIENTED_EDGE('',*,*,#405682,.T.); +#405682 = EDGE_CURVE('',#405675,#405683,#405685,.T.); +#405683 = VERTEX_POINT('',#405684); +#405684 = CARTESIAN_POINT('',(133.442536,-119.734536,-4.E-02)); +#405685 = LINE('',#405686,#405687); +#405686 = CARTESIAN_POINT('',(133.445536,-119.730536,-4.E-02)); +#405687 = VECTOR('',#405688,1.); +#405688 = DIRECTION('',(-0.600000000001,-0.799999999999,0.)); +#405689 = ORIENTED_EDGE('',*,*,#405690,.T.); +#405690 = EDGE_CURVE('',#405683,#405691,#405693,.T.); +#405691 = VERTEX_POINT('',#405692); +#405692 = CARTESIAN_POINT('',(133.434536,-119.742536,-4.E-02)); +#405693 = LINE('',#405694,#405695); +#405694 = CARTESIAN_POINT('',(133.442536,-119.734536,-4.E-02)); +#405695 = VECTOR('',#405696,1.); +#405696 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#405697 = ORIENTED_EDGE('',*,*,#405698,.T.); +#405698 = EDGE_CURVE('',#405691,#405699,#405701,.T.); +#405699 = VERTEX_POINT('',#405700); +#405700 = CARTESIAN_POINT('',(133.433236,-119.743472,-4.E-02)); +#405701 = LINE('',#405702,#405703); +#405702 = CARTESIAN_POINT('',(133.434536,-119.742536,-4.E-02)); +#405703 = VECTOR('',#405704,1.); +#405704 = DIRECTION('',(-0.811534341456,-0.584304725839,0.)); +#405705 = ORIENTED_EDGE('',*,*,#405706,.T.); +#405706 = EDGE_CURVE('',#405699,#405707,#405709,.T.); +#405707 = VERTEX_POINT('',#405708); +#405708 = CARTESIAN_POINT('',(133.429236,-119.746472,-4.E-02)); +#405709 = LINE('',#405710,#405711); +#405710 = CARTESIAN_POINT('',(133.433236,-119.743472,-4.E-02)); +#405711 = VECTOR('',#405712,1.); +#405712 = DIRECTION('',(-0.799999999999,-0.600000000001,0.)); +#405713 = ORIENTED_EDGE('',*,*,#405714,.T.); +#405714 = EDGE_CURVE('',#405707,#405715,#405717,.T.); +#405715 = VERTEX_POINT('',#405716); +#405716 = CARTESIAN_POINT('',(133.427964,-119.747108,-4.E-02)); +#405717 = LINE('',#405718,#405719); +#405718 = CARTESIAN_POINT('',(133.429236,-119.746472,-4.E-02)); +#405719 = VECTOR('',#405720,1.); +#405720 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#405721 = ORIENTED_EDGE('',*,*,#405722,.T.); +#405722 = EDGE_CURVE('',#405715,#405723,#405725,.T.); +#405723 = VERTEX_POINT('',#405724); +#405724 = CARTESIAN_POINT('',(133.420236,-119.751472,-4.E-02)); +#405725 = CIRCLE('',#405726,1.589052789719E-02); +#405726 = AXIS2_PLACEMENT_3D('',#405727,#405728,#405729); +#405727 = CARTESIAN_POINT('',(133.41659723045,-119.7360037023,-4.E-02)); +#405728 = DIRECTION('',(0.,0.,-1.)); +#405729 = DIRECTION('',(0.7153173023,-0.698799797531,0.)); +#405730 = ORIENTED_EDGE('',*,*,#405731,.T.); +#405731 = EDGE_CURVE('',#405723,#405732,#405734,.T.); +#405732 = VERTEX_POINT('',#405733); +#405733 = CARTESIAN_POINT('',(133.419581,-119.751743,-4.E-02)); +#405734 = LINE('',#405735,#405736); +#405735 = CARTESIAN_POINT('',(133.420236,-119.751472,-4.E-02)); +#405736 = VECTOR('',#405737,1.); +#405737 = DIRECTION('',(-0.924034018156,-0.382310257894,0.)); +#405738 = ORIENTED_EDGE('',*,*,#405739,.T.); +#405739 = EDGE_CURVE('',#405732,#405740,#405742,.T.); +#405740 = VERTEX_POINT('',#405741); +#405741 = CARTESIAN_POINT('',(133.416581,-119.752743,-4.E-02)); +#405742 = LINE('',#405743,#405744); +#405743 = CARTESIAN_POINT('',(133.419581,-119.751743,-4.E-02)); +#405744 = VECTOR('',#405745,1.); +#405745 = DIRECTION('',(-0.948683298051,-0.316227766015,0.)); +#405746 = ORIENTED_EDGE('',*,*,#405747,.T.); +#405747 = EDGE_CURVE('',#405740,#405748,#405750,.T.); +#405748 = VERTEX_POINT('',#405749); +#405749 = CARTESIAN_POINT('',(133.415,-119.753,-4.E-02)); +#405750 = LINE('',#405751,#405752); +#405751 = CARTESIAN_POINT('',(133.416581,-119.752743,-4.E-02)); +#405752 = VECTOR('',#405753,1.); +#405753 = DIRECTION('',(-0.987044084569,-0.160449291421,0.)); +#405754 = ORIENTED_EDGE('',*,*,#405755,.T.); +#405755 = EDGE_CURVE('',#405748,#405756,#405758,.T.); +#405756 = VERTEX_POINT('',#405757); +#405757 = CARTESIAN_POINT('',(133.41,-119.754,-4.E-02)); +#405758 = LINE('',#405759,#405760); +#405759 = CARTESIAN_POINT('',(133.415,-119.753,-4.E-02)); +#405760 = VECTOR('',#405761,1.); +#405761 = DIRECTION('',(-0.980580675691,-0.196116135139,0.)); +#405762 = ORIENTED_EDGE('',*,*,#405763,.T.); +#405763 = EDGE_CURVE('',#405756,#405764,#405766,.T.); +#405764 = VERTEX_POINT('',#405765); +#405765 = CARTESIAN_POINT('',(133.40881,-119.754,-4.E-02)); +#405766 = LINE('',#405767,#405768); +#405767 = CARTESIAN_POINT('',(133.41,-119.754,-4.E-02)); +#405768 = VECTOR('',#405769,1.); +#405769 = DIRECTION('',(-1.,0.,0.)); +#405770 = ORIENTED_EDGE('',*,*,#405771,.T.); +#405771 = EDGE_CURVE('',#405764,#405772,#405774,.T.); +#405772 = VERTEX_POINT('',#405773); +#405773 = CARTESIAN_POINT('',(133.406581,-119.754743,-4.E-02)); +#405774 = LINE('',#405775,#405776); +#405775 = CARTESIAN_POINT('',(133.40881,-119.754,-4.E-02)); +#405776 = VECTOR('',#405777,1.); +#405777 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#405778 = ORIENTED_EDGE('',*,*,#405779,.T.); +#405779 = EDGE_CURVE('',#405772,#405780,#405782,.T.); +#405780 = VERTEX_POINT('',#405781); +#405781 = CARTESIAN_POINT('',(133.405,-119.755,-4.E-02)); +#405782 = LINE('',#405783,#405784); +#405783 = CARTESIAN_POINT('',(133.406581,-119.754743,-4.E-02)); +#405784 = VECTOR('',#405785,1.); +#405785 = DIRECTION('',(-0.98704408457,-0.160449291415,0.)); +#405786 = ORIENTED_EDGE('',*,*,#405787,.T.); +#405787 = EDGE_CURVE('',#405780,#405788,#405790,.T.); +#405788 = VERTEX_POINT('',#405789); +#405789 = CARTESIAN_POINT('',(132.595,-119.755,-4.E-02)); +#405790 = LINE('',#405791,#405792); +#405791 = CARTESIAN_POINT('',(133.405,-119.755,-4.E-02)); +#405792 = VECTOR('',#405793,1.); +#405793 = DIRECTION('',(-1.,0.,0.)); +#405794 = ORIENTED_EDGE('',*,*,#405795,.T.); +#405795 = EDGE_CURVE('',#405788,#405796,#405798,.T.); +#405796 = VERTEX_POINT('',#405797); +#405797 = CARTESIAN_POINT('',(132.593419,-119.754743,-4.E-02)); +#405798 = LINE('',#405799,#405800); +#405799 = CARTESIAN_POINT('',(132.595,-119.755,-4.E-02)); +#405800 = VECTOR('',#405801,1.); +#405801 = DIRECTION('',(-0.98704408457,0.160449291415,0.)); +#405802 = ORIENTED_EDGE('',*,*,#405803,.T.); +#405803 = EDGE_CURVE('',#405796,#405804,#405806,.T.); +#405804 = VERTEX_POINT('',#405805); +#405805 = CARTESIAN_POINT('',(132.588419,-119.753743,-4.E-02)); +#405806 = LINE('',#405807,#405808); +#405807 = CARTESIAN_POINT('',(132.593419,-119.754743,-4.E-02)); +#405808 = VECTOR('',#405809,1.); +#405809 = DIRECTION('',(-0.980580675691,0.196116135138,0.)); +#405810 = ORIENTED_EDGE('',*,*,#405811,.T.); +#405811 = EDGE_CURVE('',#405804,#405812,#405814,.T.); +#405812 = VERTEX_POINT('',#405813); +#405813 = CARTESIAN_POINT('',(132.58619,-119.753,-4.E-02)); +#405814 = LINE('',#405815,#405816); +#405815 = CARTESIAN_POINT('',(132.588419,-119.753743,-4.E-02)); +#405816 = VECTOR('',#405817,1.); +#405817 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#405818 = ORIENTED_EDGE('',*,*,#405819,.T.); +#405819 = EDGE_CURVE('',#405812,#405820,#405822,.T.); +#405820 = VERTEX_POINT('',#405821); +#405821 = CARTESIAN_POINT('',(132.579764,-119.751472,-4.E-02)); +#405822 = LINE('',#405823,#405824); +#405823 = CARTESIAN_POINT('',(132.58619,-119.753,-4.E-02)); +#405824 = VECTOR('',#405825,1.); +#405825 = DIRECTION('',(-0.972874398407,0.231333968373,0.)); +#405826 = ORIENTED_EDGE('',*,*,#405827,.T.); +#405827 = EDGE_CURVE('',#405820,#405828,#405830,.T.); +#405828 = VERTEX_POINT('',#405829); +#405829 = CARTESIAN_POINT('',(132.57808,-119.75063,-4.E-02)); +#405830 = LINE('',#405831,#405832); +#405831 = CARTESIAN_POINT('',(132.579764,-119.751472,-4.E-02)); +#405832 = VECTOR('',#405833,1.); +#405833 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#405834 = ORIENTED_EDGE('',*,*,#405835,.T.); +#405835 = EDGE_CURVE('',#405828,#405836,#405838,.T.); +#405836 = VERTEX_POINT('',#405837); +#405837 = CARTESIAN_POINT('',(132.570764,-119.746472,-4.E-02)); +#405838 = LINE('',#405839,#405840); +#405839 = CARTESIAN_POINT('',(132.57808,-119.75063,-4.E-02)); +#405840 = VECTOR('',#405841,1.); +#405841 = DIRECTION('',(-0.86939622862,0.494115571159,0.)); +#405842 = ORIENTED_EDGE('',*,*,#405843,.T.); +#405843 = EDGE_CURVE('',#405836,#405844,#405846,.T.); +#405844 = VERTEX_POINT('',#405845); +#405845 = CARTESIAN_POINT('',(132.569464,-119.745536,-4.E-02)); +#405846 = LINE('',#405847,#405848); +#405847 = CARTESIAN_POINT('',(132.570764,-119.746472,-4.E-02)); +#405848 = VECTOR('',#405849,1.); +#405849 = DIRECTION('',(-0.81153434145,0.584304725847,0.)); +#405850 = ORIENTED_EDGE('',*,*,#405851,.T.); +#405851 = EDGE_CURVE('',#405844,#405852,#405854,.T.); +#405852 = VERTEX_POINT('',#405853); +#405853 = CARTESIAN_POINT('',(132.565464,-119.742536,-4.E-02)); +#405854 = LINE('',#405855,#405856); +#405855 = CARTESIAN_POINT('',(132.569464,-119.745536,-4.E-02)); +#405856 = VECTOR('',#405857,1.); +#405857 = DIRECTION('',(-0.800000000001,0.599999999998,0.)); +#405858 = ORIENTED_EDGE('',*,*,#405859,.T.); +#405859 = EDGE_CURVE('',#405852,#405860,#405862,.T.); +#405860 = VERTEX_POINT('',#405861); +#405861 = CARTESIAN_POINT('',(132.557464,-119.734536,-4.E-02)); +#405862 = LINE('',#405863,#405864); +#405863 = CARTESIAN_POINT('',(132.565464,-119.742536,-4.E-02)); +#405864 = VECTOR('',#405865,1.); +#405865 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#405866 = ORIENTED_EDGE('',*,*,#405867,.T.); +#405867 = EDGE_CURVE('',#405860,#405868,#405870,.T.); +#405868 = VERTEX_POINT('',#405869); +#405869 = CARTESIAN_POINT('',(132.556528,-119.733236,-4.E-02)); +#405870 = LINE('',#405871,#405872); +#405871 = CARTESIAN_POINT('',(132.557464,-119.734536,-4.E-02)); +#405872 = VECTOR('',#405873,1.); +#405873 = DIRECTION('',(-0.584304725855,0.811534341444,0.)); +#405874 = ORIENTED_EDGE('',*,*,#405875,.T.); +#405875 = EDGE_CURVE('',#405868,#405876,#405878,.T.); +#405876 = VERTEX_POINT('',#405877); +#405877 = CARTESIAN_POINT('',(132.553528,-119.729236,-4.E-02)); +#405878 = LINE('',#405879,#405880); +#405879 = CARTESIAN_POINT('',(132.556528,-119.733236,-4.E-02)); +#405880 = VECTOR('',#405881,1.); +#405881 = DIRECTION('',(-0.599999999998,0.800000000002,0.)); +#405882 = ORIENTED_EDGE('',*,*,#405883,.T.); +#405883 = EDGE_CURVE('',#405876,#405884,#405886,.T.); +#405884 = VERTEX_POINT('',#405885); +#405885 = CARTESIAN_POINT('',(132.552892,-119.727964,-4.E-02)); +#405886 = LINE('',#405887,#405888); +#405887 = CARTESIAN_POINT('',(132.553528,-119.729236,-4.E-02)); +#405888 = VECTOR('',#405889,1.); +#405889 = DIRECTION('',(-0.447213595492,0.894427191004,0.)); +#405890 = ORIENTED_EDGE('',*,*,#405891,.T.); +#405891 = EDGE_CURVE('',#405884,#405892,#405894,.T.); +#405892 = VERTEX_POINT('',#405893); +#405893 = CARTESIAN_POINT('',(132.548528,-119.720236,-4.E-02)); +#405894 = CIRCLE('',#405895,1.589052789649E-02); +#405895 = AXIS2_PLACEMENT_3D('',#405896,#405897,#405898); +#405896 = CARTESIAN_POINT('',(132.56399629767,-119.7165972304,-4.E-02)); +#405897 = DIRECTION('',(0.,0.,-1.)); +#405898 = DIRECTION('',(-0.698799797522,-0.71531730231,-0.)); +#405899 = ORIENTED_EDGE('',*,*,#405900,.T.); +#405900 = EDGE_CURVE('',#405892,#405901,#405903,.T.); +#405901 = VERTEX_POINT('',#405902); +#405902 = CARTESIAN_POINT('',(132.548257,-119.719581,-4.E-02)); +#405903 = LINE('',#405904,#405905); +#405904 = CARTESIAN_POINT('',(132.548528,-119.720236,-4.E-02)); +#405905 = VECTOR('',#405906,1.); +#405906 = DIRECTION('',(-0.382310257894,0.924034018156,0.)); +#405907 = ORIENTED_EDGE('',*,*,#405908,.T.); +#405908 = EDGE_CURVE('',#405901,#405909,#405911,.T.); +#405909 = VERTEX_POINT('',#405910); +#405910 = CARTESIAN_POINT('',(132.547257,-119.716581,-4.E-02)); +#405911 = LINE('',#405912,#405913); +#405912 = CARTESIAN_POINT('',(132.548257,-119.719581,-4.E-02)); +#405913 = VECTOR('',#405914,1.); +#405914 = DIRECTION('',(-0.316227766018,0.94868329805,0.)); +#405915 = ORIENTED_EDGE('',*,*,#405916,.T.); +#405916 = EDGE_CURVE('',#405909,#405917,#405919,.T.); +#405917 = VERTEX_POINT('',#405918); +#405918 = CARTESIAN_POINT('',(132.547,-119.715,-4.E-02)); +#405919 = LINE('',#405920,#405921); +#405920 = CARTESIAN_POINT('',(132.547257,-119.716581,-4.E-02)); +#405921 = VECTOR('',#405922,1.); +#405922 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#405923 = ORIENTED_EDGE('',*,*,#405924,.T.); +#405924 = EDGE_CURVE('',#405917,#405925,#405927,.T.); +#405925 = VERTEX_POINT('',#405926); +#405926 = CARTESIAN_POINT('',(132.546,-119.71,-4.E-02)); +#405927 = LINE('',#405928,#405929); +#405928 = CARTESIAN_POINT('',(132.547,-119.715,-4.E-02)); +#405929 = VECTOR('',#405930,1.); +#405930 = DIRECTION('',(-0.196116135139,0.980580675691,0.)); +#405931 = ORIENTED_EDGE('',*,*,#405932,.T.); +#405932 = EDGE_CURVE('',#405925,#405933,#405935,.T.); +#405933 = VERTEX_POINT('',#405934); +#405934 = CARTESIAN_POINT('',(132.546,-119.70881,-4.E-02)); +#405935 = LINE('',#405936,#405937); +#405936 = CARTESIAN_POINT('',(132.546,-119.71,-4.E-02)); +#405937 = VECTOR('',#405938,1.); +#405938 = DIRECTION('',(0.,1.,0.)); +#405939 = ORIENTED_EDGE('',*,*,#405940,.T.); +#405940 = EDGE_CURVE('',#405933,#405941,#405943,.T.); +#405941 = VERTEX_POINT('',#405942); +#405942 = CARTESIAN_POINT('',(132.545257,-119.706581,-4.E-02)); +#405943 = LINE('',#405944,#405945); +#405944 = CARTESIAN_POINT('',(132.546,-119.70881,-4.E-02)); +#405945 = VECTOR('',#405946,1.); +#405946 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#405947 = ORIENTED_EDGE('',*,*,#405948,.T.); +#405948 = EDGE_CURVE('',#405941,#405949,#405951,.T.); +#405949 = VERTEX_POINT('',#405950); +#405950 = CARTESIAN_POINT('',(132.545,-119.705,-4.E-02)); +#405951 = LINE('',#405952,#405953); +#405952 = CARTESIAN_POINT('',(132.545257,-119.706581,-4.E-02)); +#405953 = VECTOR('',#405954,1.); +#405954 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#405955 = ORIENTED_EDGE('',*,*,#405956,.T.); +#405956 = EDGE_CURVE('',#405949,#405957,#405959,.T.); +#405957 = VERTEX_POINT('',#405958); +#405958 = CARTESIAN_POINT('',(132.545,-118.295,-4.E-02)); +#405959 = LINE('',#405960,#405961); +#405960 = CARTESIAN_POINT('',(132.545,-119.705,-4.E-02)); +#405961 = VECTOR('',#405962,1.); +#405962 = DIRECTION('',(0.,1.,0.)); +#405963 = ORIENTED_EDGE('',*,*,#405964,.T.); +#405964 = EDGE_CURVE('',#405957,#405965,#405967,.T.); +#405965 = VERTEX_POINT('',#405966); +#405966 = CARTESIAN_POINT('',(132.545257,-118.293419,-4.E-02)); +#405967 = LINE('',#405968,#405969); +#405968 = CARTESIAN_POINT('',(132.545,-118.295,-4.E-02)); +#405969 = VECTOR('',#405970,1.); +#405970 = DIRECTION('',(0.160449291422,0.987044084569,0.)); +#405971 = ORIENTED_EDGE('',*,*,#405972,.T.); +#405972 = EDGE_CURVE('',#405965,#405973,#405975,.T.); +#405973 = VERTEX_POINT('',#405974); +#405974 = CARTESIAN_POINT('',(132.546257,-118.288419,-4.E-02)); +#405975 = LINE('',#405976,#405977); +#405976 = CARTESIAN_POINT('',(132.545257,-118.293419,-4.E-02)); +#405977 = VECTOR('',#405978,1.); +#405978 = DIRECTION('',(0.196116135139,0.980580675691,0.)); +#405979 = ORIENTED_EDGE('',*,*,#405980,.T.); +#405980 = EDGE_CURVE('',#405973,#405981,#405983,.T.); +#405981 = VERTEX_POINT('',#405982); +#405982 = CARTESIAN_POINT('',(132.547,-118.28619,-4.E-02)); +#405983 = LINE('',#405984,#405985); +#405984 = CARTESIAN_POINT('',(132.546257,-118.288419,-4.E-02)); +#405985 = VECTOR('',#405986,1.); +#405986 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#405987 = ORIENTED_EDGE('',*,*,#405988,.T.); +#405988 = EDGE_CURVE('',#405981,#405989,#405991,.T.); +#405989 = VERTEX_POINT('',#405990); +#405990 = CARTESIAN_POINT('',(132.548528,-118.279764,-4.E-02)); +#405991 = LINE('',#405992,#405993); +#405992 = CARTESIAN_POINT('',(132.547,-118.28619,-4.E-02)); +#405993 = VECTOR('',#405994,1.); +#405994 = DIRECTION('',(0.231333968374,0.972874398407,0.)); +#405995 = ORIENTED_EDGE('',*,*,#405996,.T.); +#405996 = EDGE_CURVE('',#405989,#405997,#405999,.T.); +#405997 = VERTEX_POINT('',#405998); +#405998 = CARTESIAN_POINT('',(132.54937,-118.27808,-4.E-02)); +#405999 = LINE('',#406000,#406001); +#406000 = CARTESIAN_POINT('',(132.548528,-118.279764,-4.E-02)); +#406001 = VECTOR('',#406002,1.); +#406002 = DIRECTION('',(0.447213595503,0.894427190998,0.)); +#406003 = ORIENTED_EDGE('',*,*,#406004,.T.); +#406004 = EDGE_CURVE('',#405997,#406005,#406007,.T.); +#406005 = VERTEX_POINT('',#406006); +#406006 = CARTESIAN_POINT('',(132.553528,-118.270764,-4.E-02)); +#406007 = LINE('',#406008,#406009); +#406008 = CARTESIAN_POINT('',(132.54937,-118.27808,-4.E-02)); +#406009 = VECTOR('',#406010,1.); +#406010 = DIRECTION('',(0.494115571158,0.86939622862,0.)); +#406011 = ORIENTED_EDGE('',*,*,#406012,.T.); +#406012 = EDGE_CURVE('',#406005,#406013,#406015,.T.); +#406013 = VERTEX_POINT('',#406014); +#406014 = CARTESIAN_POINT('',(132.554464,-118.269464,-4.E-02)); +#406015 = LINE('',#406016,#406017); +#406016 = CARTESIAN_POINT('',(132.553528,-118.270764,-4.E-02)); +#406017 = VECTOR('',#406018,1.); +#406018 = DIRECTION('',(0.584304725843,0.811534341453,0.)); +#406019 = ORIENTED_EDGE('',*,*,#406020,.T.); +#406020 = EDGE_CURVE('',#406013,#406021,#406023,.T.); +#406021 = VERTEX_POINT('',#406022); +#406022 = CARTESIAN_POINT('',(132.557464,-118.265464,-4.E-02)); +#406023 = LINE('',#406024,#406025); +#406024 = CARTESIAN_POINT('',(132.554464,-118.269464,-4.E-02)); +#406025 = VECTOR('',#406026,1.); +#406026 = DIRECTION('',(0.600000000001,0.799999999999,0.)); +#406027 = ORIENTED_EDGE('',*,*,#406028,.T.); +#406028 = EDGE_CURVE('',#406021,#406029,#406031,.T.); +#406029 = VERTEX_POINT('',#406030); +#406030 = CARTESIAN_POINT('',(132.565464,-118.257464,-4.E-02)); +#406031 = LINE('',#406032,#406033); +#406032 = CARTESIAN_POINT('',(132.557464,-118.265464,-4.E-02)); +#406033 = VECTOR('',#406034,1.); +#406034 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#406035 = ORIENTED_EDGE('',*,*,#406036,.T.); +#406036 = EDGE_CURVE('',#406029,#406037,#406039,.T.); +#406037 = VERTEX_POINT('',#406038); +#406038 = CARTESIAN_POINT('',(132.566764,-118.256528,-4.E-02)); +#406039 = LINE('',#406040,#406041); +#406040 = CARTESIAN_POINT('',(132.565464,-118.257464,-4.E-02)); +#406041 = VECTOR('',#406042,1.); +#406042 = DIRECTION('',(0.811534341456,0.584304725839,0.)); +#406043 = ORIENTED_EDGE('',*,*,#406044,.T.); +#406044 = EDGE_CURVE('',#406037,#406045,#406047,.T.); +#406045 = VERTEX_POINT('',#406046); +#406046 = CARTESIAN_POINT('',(132.570764,-118.253528,-4.E-02)); +#406047 = LINE('',#406048,#406049); +#406048 = CARTESIAN_POINT('',(132.566764,-118.256528,-4.E-02)); +#406049 = VECTOR('',#406050,1.); +#406050 = DIRECTION('',(0.799999999999,0.600000000001,0.)); +#406051 = ORIENTED_EDGE('',*,*,#406052,.T.); +#406052 = EDGE_CURVE('',#406045,#406053,#406055,.T.); +#406053 = VERTEX_POINT('',#406054); +#406054 = CARTESIAN_POINT('',(132.572036,-118.252892,-4.E-02)); +#406055 = LINE('',#406056,#406057); +#406056 = CARTESIAN_POINT('',(132.570764,-118.253528,-4.E-02)); +#406057 = VECTOR('',#406058,1.); +#406058 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#406059 = ORIENTED_EDGE('',*,*,#406060,.T.); +#406060 = EDGE_CURVE('',#406053,#406061,#406063,.T.); +#406061 = VERTEX_POINT('',#406062); +#406062 = CARTESIAN_POINT('',(132.579764,-118.248528,-4.E-02)); +#406063 = CIRCLE('',#406064,1.589052789719E-02); +#406064 = AXIS2_PLACEMENT_3D('',#406065,#406066,#406067); +#406065 = CARTESIAN_POINT('',(132.58340276954,-118.2639962976,-4.E-02)); +#406066 = DIRECTION('',(0.,0.,-1.)); +#406067 = DIRECTION('',(-0.7153173023,0.698799797531,0.)); +#406068 = ORIENTED_EDGE('',*,*,#406069,.T.); +#406069 = EDGE_CURVE('',#406061,#406070,#406072,.T.); +#406070 = VERTEX_POINT('',#406071); +#406071 = CARTESIAN_POINT('',(132.580419,-118.248257,-4.E-02)); +#406072 = LINE('',#406073,#406074); +#406073 = CARTESIAN_POINT('',(132.579764,-118.248528,-4.E-02)); +#406074 = VECTOR('',#406075,1.); +#406075 = DIRECTION('',(0.924034018156,0.382310257894,0.)); +#406076 = ORIENTED_EDGE('',*,*,#406077,.T.); +#406077 = EDGE_CURVE('',#406070,#406078,#406080,.T.); +#406078 = VERTEX_POINT('',#406079); +#406079 = CARTESIAN_POINT('',(132.583419,-118.247257,-4.E-02)); +#406080 = LINE('',#406081,#406082); +#406081 = CARTESIAN_POINT('',(132.580419,-118.248257,-4.E-02)); +#406082 = VECTOR('',#406083,1.); +#406083 = DIRECTION('',(0.948683298051,0.316227766015,0.)); +#406084 = ORIENTED_EDGE('',*,*,#406085,.T.); +#406085 = EDGE_CURVE('',#406078,#406086,#406088,.T.); +#406086 = VERTEX_POINT('',#406087); +#406087 = CARTESIAN_POINT('',(132.585,-118.247,-4.E-02)); +#406088 = LINE('',#406089,#406090); +#406089 = CARTESIAN_POINT('',(132.583419,-118.247257,-4.E-02)); +#406090 = VECTOR('',#406091,1.); +#406091 = DIRECTION('',(0.987044084569,0.160449291421,0.)); +#406092 = ORIENTED_EDGE('',*,*,#406093,.T.); +#406093 = EDGE_CURVE('',#406086,#406094,#406096,.T.); +#406094 = VERTEX_POINT('',#406095); +#406095 = CARTESIAN_POINT('',(132.59,-118.246,-4.E-02)); +#406096 = LINE('',#406097,#406098); +#406097 = CARTESIAN_POINT('',(132.585,-118.247,-4.E-02)); +#406098 = VECTOR('',#406099,1.); +#406099 = DIRECTION('',(0.980580675691,0.196116135139,0.)); +#406100 = ORIENTED_EDGE('',*,*,#406101,.T.); +#406101 = EDGE_CURVE('',#406094,#404713,#406102,.T.); +#406102 = LINE('',#406103,#406104); +#406103 = CARTESIAN_POINT('',(132.59,-118.246,-4.E-02)); +#406104 = VECTOR('',#406105,1.); +#406105 = DIRECTION('',(1.,0.,0.)); +#406106 = ORIENTED_EDGE('',*,*,#404720,.T.); +#406107 = FACE_BOUND('',#406108,.T.); +#406108 = EDGE_LOOP('',(#406109)); +#406109 = ORIENTED_EDGE('',*,*,#406110,.F.); +#406110 = EDGE_CURVE('',#406111,#406111,#406113,.T.); +#406111 = VERTEX_POINT('',#406112); +#406112 = CARTESIAN_POINT('',(133.,-119.575,-4.E-02)); +#406113 = CIRCLE('',#406114,7.499999999999E-02); +#406114 = AXIS2_PLACEMENT_3D('',#406115,#406116,#406117); +#406115 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#406116 = DIRECTION('',(-0.,0.,-1.)); +#406117 = DIRECTION('',(-0.,-1.,0.)); +#406118 = FACE_BOUND('',#406119,.T.); +#406119 = EDGE_LOOP('',(#406120)); +#406120 = ORIENTED_EDGE('',*,*,#406121,.F.); +#406121 = EDGE_CURVE('',#406122,#406122,#406124,.T.); +#406122 = VERTEX_POINT('',#406123); +#406123 = CARTESIAN_POINT('',(133.,-118.575,-4.E-02)); +#406124 = CIRCLE('',#406125,7.499999999999E-02); +#406125 = AXIS2_PLACEMENT_3D('',#406126,#406127,#406128); +#406126 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#406127 = DIRECTION('',(-0.,0.,-1.)); +#406128 = DIRECTION('',(-0.,-1.,0.)); +#406129 = PLANE('',#406130); +#406130 = AXIS2_PLACEMENT_3D('',#406131,#406132,#406133); +#406131 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#406132 = DIRECTION('',(-0.,-0.,-1.)); +#406133 = DIRECTION('',(-1.,0.,0.)); +#406134 = ADVANCED_FACE('',(#406135),#406146,.F.); +#406135 = FACE_BOUND('',#406136,.F.); +#406136 = EDGE_LOOP('',(#406137,#406143,#406144,#406145)); +#406137 = ORIENTED_EDGE('',*,*,#406138,.T.); +#406138 = EDGE_CURVE('',#405411,#406094,#406139,.T.); +#406139 = LINE('',#406140,#406141); +#406140 = CARTESIAN_POINT('',(132.59,-118.246,0.)); +#406141 = VECTOR('',#406142,1.); +#406142 = DIRECTION('',(0.,0.,-1.)); +#406143 = ORIENTED_EDGE('',*,*,#406101,.T.); +#406144 = ORIENTED_EDGE('',*,*,#404710,.F.); +#406145 = ORIENTED_EDGE('',*,*,#405418,.F.); +#406146 = PLANE('',#406147); +#406147 = AXIS2_PLACEMENT_3D('',#406148,#406149,#406150); +#406148 = CARTESIAN_POINT('',(132.59,-118.246,0.)); +#406149 = DIRECTION('',(0.,-1.,0.)); +#406150 = DIRECTION('',(1.,0.,0.)); +#406151 = ADVANCED_FACE('',(#406152),#406163,.F.); +#406152 = FACE_BOUND('',#406153,.F.); +#406153 = EDGE_LOOP('',(#406154,#406155,#406156,#406162)); +#406154 = ORIENTED_EDGE('',*,*,#404750,.T.); +#406155 = ORIENTED_EDGE('',*,*,#405457,.T.); +#406156 = ORIENTED_EDGE('',*,*,#406157,.F.); +#406157 = EDGE_CURVE('',#404775,#405458,#406158,.T.); +#406158 = LINE('',#406159,#406160); +#406159 = CARTESIAN_POINT('',(133.406581,-118.245257,0.)); +#406160 = VECTOR('',#406161,1.); +#406161 = DIRECTION('',(0.,0.,-1.)); +#406162 = ORIENTED_EDGE('',*,*,#404774,.F.); +#406163 = PLANE('',#406164); +#406164 = AXIS2_PLACEMENT_3D('',#406165,#406166,#406167); +#406165 = CARTESIAN_POINT('',(133.405,-118.245,0.)); +#406166 = DIRECTION('',(-0.160449291415,-0.98704408457,-0.)); +#406167 = DIRECTION('',(0.98704408457,-0.160449291415,0.)); +#406168 = ADVANCED_FACE('',(#406169),#406180,.F.); +#406169 = FACE_BOUND('',#406170,.F.); +#406170 = EDGE_LOOP('',(#406171,#406177,#406178,#406179)); +#406171 = ORIENTED_EDGE('',*,*,#406172,.T.); +#406172 = EDGE_CURVE('',#405403,#406086,#406173,.T.); +#406173 = LINE('',#406174,#406175); +#406174 = CARTESIAN_POINT('',(132.585,-118.247,0.)); +#406175 = VECTOR('',#406176,1.); +#406176 = DIRECTION('',(0.,0.,-1.)); +#406177 = ORIENTED_EDGE('',*,*,#406093,.T.); +#406178 = ORIENTED_EDGE('',*,*,#406138,.F.); +#406179 = ORIENTED_EDGE('',*,*,#405410,.F.); +#406180 = PLANE('',#406181); +#406181 = AXIS2_PLACEMENT_3D('',#406182,#406183,#406184); +#406182 = CARTESIAN_POINT('',(132.585,-118.247,0.)); +#406183 = DIRECTION('',(0.196116135139,-0.980580675691,0.)); +#406184 = DIRECTION('',(0.980580675691,0.196116135139,0.)); +#406185 = ADVANCED_FACE('',(#406186),#406197,.F.); +#406186 = FACE_BOUND('',#406187,.F.); +#406187 = EDGE_LOOP('',(#406188,#406189,#406190,#406196)); +#406188 = ORIENTED_EDGE('',*,*,#406157,.T.); +#406189 = ORIENTED_EDGE('',*,*,#405465,.T.); +#406190 = ORIENTED_EDGE('',*,*,#406191,.F.); +#406191 = EDGE_CURVE('',#404783,#405466,#406192,.T.); +#406192 = LINE('',#406193,#406194); +#406193 = CARTESIAN_POINT('',(133.411581,-118.246257,0.)); +#406194 = VECTOR('',#406195,1.); +#406195 = DIRECTION('',(0.,0.,-1.)); +#406196 = ORIENTED_EDGE('',*,*,#404782,.F.); +#406197 = PLANE('',#406198); +#406198 = AXIS2_PLACEMENT_3D('',#406199,#406200,#406201); +#406199 = CARTESIAN_POINT('',(133.406581,-118.245257,0.)); +#406200 = DIRECTION('',(-0.196116135138,-0.980580675691,-0.)); +#406201 = DIRECTION('',(0.980580675691,-0.196116135138,0.)); +#406202 = ADVANCED_FACE('',(#406203),#406214,.F.); +#406203 = FACE_BOUND('',#406204,.F.); +#406204 = EDGE_LOOP('',(#406205,#406211,#406212,#406213)); +#406205 = ORIENTED_EDGE('',*,*,#406206,.T.); +#406206 = EDGE_CURVE('',#405395,#406078,#406207,.T.); +#406207 = LINE('',#406208,#406209); +#406208 = CARTESIAN_POINT('',(132.583419,-118.247257,0.)); +#406209 = VECTOR('',#406210,1.); +#406210 = DIRECTION('',(0.,0.,-1.)); +#406211 = ORIENTED_EDGE('',*,*,#406085,.T.); +#406212 = ORIENTED_EDGE('',*,*,#406172,.F.); +#406213 = ORIENTED_EDGE('',*,*,#405402,.F.); +#406214 = PLANE('',#406215); +#406215 = AXIS2_PLACEMENT_3D('',#406216,#406217,#406218); +#406216 = CARTESIAN_POINT('',(132.583419,-118.247257,0.)); +#406217 = DIRECTION('',(0.160449291421,-0.987044084569,0.)); +#406218 = DIRECTION('',(0.987044084569,0.160449291421,0.)); +#406219 = ADVANCED_FACE('',(#406220),#406231,.F.); +#406220 = FACE_BOUND('',#406221,.F.); +#406221 = EDGE_LOOP('',(#406222,#406223,#406224,#406230)); +#406222 = ORIENTED_EDGE('',*,*,#406191,.T.); +#406223 = ORIENTED_EDGE('',*,*,#405473,.T.); +#406224 = ORIENTED_EDGE('',*,*,#406225,.F.); +#406225 = EDGE_CURVE('',#404791,#405474,#406226,.T.); +#406226 = LINE('',#406227,#406228); +#406227 = CARTESIAN_POINT('',(133.41381,-118.247,0.)); +#406228 = VECTOR('',#406229,1.); +#406229 = DIRECTION('',(0.,0.,-1.)); +#406230 = ORIENTED_EDGE('',*,*,#404790,.F.); +#406231 = PLANE('',#406232); +#406232 = AXIS2_PLACEMENT_3D('',#406233,#406234,#406235); +#406233 = CARTESIAN_POINT('',(133.411581,-118.246257,0.)); +#406234 = DIRECTION('',(-0.316227766017,-0.948683298051,-0.)); +#406235 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#406236 = ADVANCED_FACE('',(#406237),#406248,.F.); +#406237 = FACE_BOUND('',#406238,.F.); +#406238 = EDGE_LOOP('',(#406239,#406245,#406246,#406247)); +#406239 = ORIENTED_EDGE('',*,*,#406240,.T.); +#406240 = EDGE_CURVE('',#405387,#406070,#406241,.T.); +#406241 = LINE('',#406242,#406243); +#406242 = CARTESIAN_POINT('',(132.580419,-118.248257,0.)); +#406243 = VECTOR('',#406244,1.); +#406244 = DIRECTION('',(0.,0.,-1.)); +#406245 = ORIENTED_EDGE('',*,*,#406077,.T.); +#406246 = ORIENTED_EDGE('',*,*,#406206,.F.); +#406247 = ORIENTED_EDGE('',*,*,#405394,.F.); +#406248 = PLANE('',#406249); +#406249 = AXIS2_PLACEMENT_3D('',#406250,#406251,#406252); +#406250 = CARTESIAN_POINT('',(132.580419,-118.248257,0.)); +#406251 = DIRECTION('',(0.316227766015,-0.948683298051,0.)); +#406252 = DIRECTION('',(0.948683298051,0.316227766015,0.)); +#406253 = ADVANCED_FACE('',(#406254),#406265,.F.); +#406254 = FACE_BOUND('',#406255,.F.); +#406255 = EDGE_LOOP('',(#406256,#406257,#406258,#406264)); +#406256 = ORIENTED_EDGE('',*,*,#406225,.T.); +#406257 = ORIENTED_EDGE('',*,*,#405481,.T.); +#406258 = ORIENTED_EDGE('',*,*,#406259,.F.); +#406259 = EDGE_CURVE('',#404799,#405482,#406260,.T.); +#406260 = LINE('',#406261,#406262); +#406261 = CARTESIAN_POINT('',(133.420236,-118.248528,0.)); +#406262 = VECTOR('',#406263,1.); +#406263 = DIRECTION('',(0.,0.,-1.)); +#406264 = ORIENTED_EDGE('',*,*,#404798,.F.); +#406265 = PLANE('',#406266); +#406266 = AXIS2_PLACEMENT_3D('',#406267,#406268,#406269); +#406267 = CARTESIAN_POINT('',(133.41381,-118.247,0.)); +#406268 = DIRECTION('',(-0.231333968373,-0.972874398407,-0.)); +#406269 = DIRECTION('',(0.972874398407,-0.231333968373,0.)); +#406270 = ADVANCED_FACE('',(#406271),#406282,.F.); +#406271 = FACE_BOUND('',#406272,.F.); +#406272 = EDGE_LOOP('',(#406273,#406279,#406280,#406281)); +#406273 = ORIENTED_EDGE('',*,*,#406274,.T.); +#406274 = EDGE_CURVE('',#405378,#406061,#406275,.T.); +#406275 = LINE('',#406276,#406277); +#406276 = CARTESIAN_POINT('',(132.579764,-118.248528,0.)); +#406277 = VECTOR('',#406278,1.); +#406278 = DIRECTION('',(0.,0.,-1.)); +#406279 = ORIENTED_EDGE('',*,*,#406069,.T.); +#406280 = ORIENTED_EDGE('',*,*,#406240,.F.); +#406281 = ORIENTED_EDGE('',*,*,#405386,.F.); +#406282 = PLANE('',#406283); +#406283 = AXIS2_PLACEMENT_3D('',#406284,#406285,#406286); +#406284 = CARTESIAN_POINT('',(132.579764,-118.248528,0.)); +#406285 = DIRECTION('',(0.382310257894,-0.924034018156,0.)); +#406286 = DIRECTION('',(0.924034018156,0.382310257894,0.)); +#406287 = ADVANCED_FACE('',(#406288),#406299,.F.); +#406288 = FACE_BOUND('',#406289,.F.); +#406289 = EDGE_LOOP('',(#406290,#406291,#406292,#406298)); +#406290 = ORIENTED_EDGE('',*,*,#406259,.T.); +#406291 = ORIENTED_EDGE('',*,*,#405489,.T.); +#406292 = ORIENTED_EDGE('',*,*,#406293,.F.); +#406293 = EDGE_CURVE('',#404807,#405490,#406294,.T.); +#406294 = LINE('',#406295,#406296); +#406295 = CARTESIAN_POINT('',(133.42192,-118.24937,0.)); +#406296 = VECTOR('',#406297,1.); +#406297 = DIRECTION('',(0.,0.,-1.)); +#406298 = ORIENTED_EDGE('',*,*,#404806,.F.); +#406299 = PLANE('',#406300); +#406300 = AXIS2_PLACEMENT_3D('',#406301,#406302,#406303); +#406301 = CARTESIAN_POINT('',(133.420236,-118.248528,0.)); +#406302 = DIRECTION('',(-0.4472135955,-0.894427191,-0.)); +#406303 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#406304 = ADVANCED_FACE('',(#406305),#406316,.T.); +#406305 = FACE_BOUND('',#406306,.F.); +#406306 = EDGE_LOOP('',(#406307,#406313,#406314,#406315)); +#406307 = ORIENTED_EDGE('',*,*,#406308,.T.); +#406308 = EDGE_CURVE('',#405370,#406053,#406309,.T.); +#406309 = LINE('',#406310,#406311); +#406310 = CARTESIAN_POINT('',(132.572036,-118.252892,0.)); +#406311 = VECTOR('',#406312,1.); +#406312 = DIRECTION('',(0.,0.,-1.)); +#406313 = ORIENTED_EDGE('',*,*,#406060,.T.); +#406314 = ORIENTED_EDGE('',*,*,#406274,.F.); +#406315 = ORIENTED_EDGE('',*,*,#405377,.F.); +#406316 = CYLINDRICAL_SURFACE('',#406317,1.589052789719E-02); +#406317 = AXIS2_PLACEMENT_3D('',#406318,#406319,#406320); +#406318 = CARTESIAN_POINT('',(132.58340276954,-118.2639962976,0.)); +#406319 = DIRECTION('',(-0.,-0.,1.)); +#406320 = DIRECTION('',(-0.7153173023,0.698799797531,0.)); +#406321 = ADVANCED_FACE('',(#406322),#406333,.F.); +#406322 = FACE_BOUND('',#406323,.F.); +#406323 = EDGE_LOOP('',(#406324,#406325,#406326,#406332)); +#406324 = ORIENTED_EDGE('',*,*,#406293,.T.); +#406325 = ORIENTED_EDGE('',*,*,#405497,.T.); +#406326 = ORIENTED_EDGE('',*,*,#406327,.F.); +#406327 = EDGE_CURVE('',#404815,#405498,#406328,.T.); +#406328 = LINE('',#406329,#406330); +#406329 = CARTESIAN_POINT('',(133.429236,-118.253528,0.)); +#406330 = VECTOR('',#406331,1.); +#406331 = DIRECTION('',(0.,0.,-1.)); +#406332 = ORIENTED_EDGE('',*,*,#404814,.F.); +#406333 = PLANE('',#406334); +#406334 = AXIS2_PLACEMENT_3D('',#406335,#406336,#406337); +#406335 = CARTESIAN_POINT('',(133.42192,-118.24937,0.)); +#406336 = DIRECTION('',(-0.494115571159,-0.86939622862,-0.)); +#406337 = DIRECTION('',(0.86939622862,-0.494115571159,0.)); +#406338 = ADVANCED_FACE('',(#406339),#406350,.F.); +#406339 = FACE_BOUND('',#406340,.F.); +#406340 = EDGE_LOOP('',(#406341,#406347,#406348,#406349)); +#406341 = ORIENTED_EDGE('',*,*,#406342,.T.); +#406342 = EDGE_CURVE('',#405362,#406045,#406343,.T.); +#406343 = LINE('',#406344,#406345); +#406344 = CARTESIAN_POINT('',(132.570764,-118.253528,0.)); +#406345 = VECTOR('',#406346,1.); +#406346 = DIRECTION('',(0.,0.,-1.)); +#406347 = ORIENTED_EDGE('',*,*,#406052,.T.); +#406348 = ORIENTED_EDGE('',*,*,#406308,.F.); +#406349 = ORIENTED_EDGE('',*,*,#405369,.F.); +#406350 = PLANE('',#406351); +#406351 = AXIS2_PLACEMENT_3D('',#406352,#406353,#406354); +#406352 = CARTESIAN_POINT('',(132.570764,-118.253528,0.)); +#406353 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#406354 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#406355 = ADVANCED_FACE('',(#406356),#406367,.F.); +#406356 = FACE_BOUND('',#406357,.F.); +#406357 = EDGE_LOOP('',(#406358,#406359,#406360,#406366)); +#406358 = ORIENTED_EDGE('',*,*,#406327,.T.); +#406359 = ORIENTED_EDGE('',*,*,#405505,.T.); +#406360 = ORIENTED_EDGE('',*,*,#406361,.F.); +#406361 = EDGE_CURVE('',#404823,#405506,#406362,.T.); +#406362 = LINE('',#406363,#406364); +#406363 = CARTESIAN_POINT('',(133.430536,-118.254464,0.)); +#406364 = VECTOR('',#406365,1.); +#406365 = DIRECTION('',(0.,0.,-1.)); +#406366 = ORIENTED_EDGE('',*,*,#404822,.F.); +#406367 = PLANE('',#406368); +#406368 = AXIS2_PLACEMENT_3D('',#406369,#406370,#406371); +#406369 = CARTESIAN_POINT('',(133.429236,-118.253528,0.)); +#406370 = DIRECTION('',(-0.584304725847,-0.81153434145,-0.)); +#406371 = DIRECTION('',(0.81153434145,-0.584304725847,0.)); +#406372 = ADVANCED_FACE('',(#406373),#406384,.F.); +#406373 = FACE_BOUND('',#406374,.F.); +#406374 = EDGE_LOOP('',(#406375,#406381,#406382,#406383)); +#406375 = ORIENTED_EDGE('',*,*,#406376,.T.); +#406376 = EDGE_CURVE('',#405354,#406037,#406377,.T.); +#406377 = LINE('',#406378,#406379); +#406378 = CARTESIAN_POINT('',(132.566764,-118.256528,0.)); +#406379 = VECTOR('',#406380,1.); +#406380 = DIRECTION('',(0.,0.,-1.)); +#406381 = ORIENTED_EDGE('',*,*,#406044,.T.); +#406382 = ORIENTED_EDGE('',*,*,#406342,.F.); +#406383 = ORIENTED_EDGE('',*,*,#405361,.F.); +#406384 = PLANE('',#406385); +#406385 = AXIS2_PLACEMENT_3D('',#406386,#406387,#406388); +#406386 = CARTESIAN_POINT('',(132.566764,-118.256528,0.)); +#406387 = DIRECTION('',(0.600000000001,-0.799999999999,0.)); +#406388 = DIRECTION('',(0.799999999999,0.600000000001,0.)); +#406389 = ADVANCED_FACE('',(#406390),#406401,.F.); +#406390 = FACE_BOUND('',#406391,.F.); +#406391 = EDGE_LOOP('',(#406392,#406393,#406394,#406400)); +#406392 = ORIENTED_EDGE('',*,*,#406361,.T.); +#406393 = ORIENTED_EDGE('',*,*,#405513,.T.); +#406394 = ORIENTED_EDGE('',*,*,#406395,.F.); +#406395 = EDGE_CURVE('',#404831,#405514,#406396,.T.); +#406396 = LINE('',#406397,#406398); +#406397 = CARTESIAN_POINT('',(133.434536,-118.257464,0.)); +#406398 = VECTOR('',#406399,1.); +#406399 = DIRECTION('',(0.,0.,-1.)); +#406400 = ORIENTED_EDGE('',*,*,#404830,.F.); +#406401 = PLANE('',#406402); +#406402 = AXIS2_PLACEMENT_3D('',#406403,#406404,#406405); +#406403 = CARTESIAN_POINT('',(133.430536,-118.254464,0.)); +#406404 = DIRECTION('',(-0.599999999998,-0.800000000001,-0.)); +#406405 = DIRECTION('',(0.800000000001,-0.599999999998,0.)); +#406406 = ADVANCED_FACE('',(#406407),#406418,.F.); +#406407 = FACE_BOUND('',#406408,.F.); +#406408 = EDGE_LOOP('',(#406409,#406415,#406416,#406417)); +#406409 = ORIENTED_EDGE('',*,*,#406410,.T.); +#406410 = EDGE_CURVE('',#405346,#406029,#406411,.T.); +#406411 = LINE('',#406412,#406413); +#406412 = CARTESIAN_POINT('',(132.565464,-118.257464,0.)); +#406413 = VECTOR('',#406414,1.); +#406414 = DIRECTION('',(0.,0.,-1.)); +#406415 = ORIENTED_EDGE('',*,*,#406036,.T.); +#406416 = ORIENTED_EDGE('',*,*,#406376,.F.); +#406417 = ORIENTED_EDGE('',*,*,#405353,.F.); +#406418 = PLANE('',#406419); +#406419 = AXIS2_PLACEMENT_3D('',#406420,#406421,#406422); +#406420 = CARTESIAN_POINT('',(132.565464,-118.257464,0.)); +#406421 = DIRECTION('',(0.584304725839,-0.811534341456,0.)); +#406422 = DIRECTION('',(0.811534341456,0.584304725839,0.)); +#406423 = ADVANCED_FACE('',(#406424),#406435,.F.); +#406424 = FACE_BOUND('',#406425,.F.); +#406425 = EDGE_LOOP('',(#406426,#406427,#406428,#406434)); +#406426 = ORIENTED_EDGE('',*,*,#406395,.T.); +#406427 = ORIENTED_EDGE('',*,*,#405521,.T.); +#406428 = ORIENTED_EDGE('',*,*,#406429,.F.); +#406429 = EDGE_CURVE('',#404839,#405522,#406430,.T.); +#406430 = LINE('',#406431,#406432); +#406431 = CARTESIAN_POINT('',(133.442536,-118.265464,0.)); +#406432 = VECTOR('',#406433,1.); +#406433 = DIRECTION('',(0.,0.,-1.)); +#406434 = ORIENTED_EDGE('',*,*,#404838,.F.); +#406435 = PLANE('',#406436); +#406436 = AXIS2_PLACEMENT_3D('',#406437,#406438,#406439); +#406437 = CARTESIAN_POINT('',(133.434536,-118.257464,0.)); +#406438 = DIRECTION('',(-0.707106781187,-0.707106781186,-0.)); +#406439 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#406440 = ADVANCED_FACE('',(#406441),#406452,.F.); +#406441 = FACE_BOUND('',#406442,.F.); +#406442 = EDGE_LOOP('',(#406443,#406449,#406450,#406451)); +#406443 = ORIENTED_EDGE('',*,*,#406444,.T.); +#406444 = EDGE_CURVE('',#405338,#406021,#406445,.T.); +#406445 = LINE('',#406446,#406447); +#406446 = CARTESIAN_POINT('',(132.557464,-118.265464,0.)); +#406447 = VECTOR('',#406448,1.); +#406448 = DIRECTION('',(0.,0.,-1.)); +#406449 = ORIENTED_EDGE('',*,*,#406028,.T.); +#406450 = ORIENTED_EDGE('',*,*,#406410,.F.); +#406451 = ORIENTED_EDGE('',*,*,#405345,.F.); +#406452 = PLANE('',#406453); +#406453 = AXIS2_PLACEMENT_3D('',#406454,#406455,#406456); +#406454 = CARTESIAN_POINT('',(132.557464,-118.265464,0.)); +#406455 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#406456 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#406457 = ADVANCED_FACE('',(#406458),#406469,.F.); +#406458 = FACE_BOUND('',#406459,.F.); +#406459 = EDGE_LOOP('',(#406460,#406461,#406462,#406468)); +#406460 = ORIENTED_EDGE('',*,*,#406429,.T.); +#406461 = ORIENTED_EDGE('',*,*,#405529,.T.); +#406462 = ORIENTED_EDGE('',*,*,#406463,.F.); +#406463 = EDGE_CURVE('',#404847,#405530,#406464,.T.); +#406464 = LINE('',#406465,#406466); +#406465 = CARTESIAN_POINT('',(133.443472,-118.266764,0.)); +#406466 = VECTOR('',#406467,1.); +#406467 = DIRECTION('',(0.,0.,-1.)); +#406468 = ORIENTED_EDGE('',*,*,#404846,.F.); +#406469 = PLANE('',#406470); +#406470 = AXIS2_PLACEMENT_3D('',#406471,#406472,#406473); +#406471 = CARTESIAN_POINT('',(133.442536,-118.265464,0.)); +#406472 = DIRECTION('',(-0.811534341444,-0.584304725855,-0.)); +#406473 = DIRECTION('',(0.584304725855,-0.811534341444,0.)); +#406474 = ADVANCED_FACE('',(#406475),#406486,.F.); +#406475 = FACE_BOUND('',#406476,.F.); +#406476 = EDGE_LOOP('',(#406477,#406483,#406484,#406485)); +#406477 = ORIENTED_EDGE('',*,*,#406478,.T.); +#406478 = EDGE_CURVE('',#405330,#406013,#406479,.T.); +#406479 = LINE('',#406480,#406481); +#406480 = CARTESIAN_POINT('',(132.554464,-118.269464,0.)); +#406481 = VECTOR('',#406482,1.); +#406482 = DIRECTION('',(0.,0.,-1.)); +#406483 = ORIENTED_EDGE('',*,*,#406020,.T.); +#406484 = ORIENTED_EDGE('',*,*,#406444,.F.); +#406485 = ORIENTED_EDGE('',*,*,#405337,.F.); +#406486 = PLANE('',#406487); +#406487 = AXIS2_PLACEMENT_3D('',#406488,#406489,#406490); +#406488 = CARTESIAN_POINT('',(132.554464,-118.269464,0.)); +#406489 = DIRECTION('',(0.799999999999,-0.600000000001,0.)); +#406490 = DIRECTION('',(0.600000000001,0.799999999999,0.)); +#406491 = ADVANCED_FACE('',(#406492),#406503,.F.); +#406492 = FACE_BOUND('',#406493,.F.); +#406493 = EDGE_LOOP('',(#406494,#406495,#406496,#406502)); +#406494 = ORIENTED_EDGE('',*,*,#406463,.T.); +#406495 = ORIENTED_EDGE('',*,*,#405537,.T.); +#406496 = ORIENTED_EDGE('',*,*,#406497,.F.); +#406497 = EDGE_CURVE('',#404855,#405538,#406498,.T.); +#406498 = LINE('',#406499,#406500); +#406499 = CARTESIAN_POINT('',(133.446472,-118.270764,0.)); +#406500 = VECTOR('',#406501,1.); +#406501 = DIRECTION('',(0.,0.,-1.)); +#406502 = ORIENTED_EDGE('',*,*,#404854,.F.); +#406503 = PLANE('',#406504); +#406504 = AXIS2_PLACEMENT_3D('',#406505,#406506,#406507); +#406505 = CARTESIAN_POINT('',(133.443472,-118.266764,0.)); +#406506 = DIRECTION('',(-0.800000000002,-0.599999999998,-0.)); +#406507 = DIRECTION('',(0.599999999998,-0.800000000002,0.)); +#406508 = ADVANCED_FACE('',(#406509),#406520,.F.); +#406509 = FACE_BOUND('',#406510,.F.); +#406510 = EDGE_LOOP('',(#406511,#406517,#406518,#406519)); +#406511 = ORIENTED_EDGE('',*,*,#406512,.T.); +#406512 = EDGE_CURVE('',#405322,#406005,#406513,.T.); +#406513 = LINE('',#406514,#406515); +#406514 = CARTESIAN_POINT('',(132.553528,-118.270764,0.)); +#406515 = VECTOR('',#406516,1.); +#406516 = DIRECTION('',(0.,0.,-1.)); +#406517 = ORIENTED_EDGE('',*,*,#406012,.T.); +#406518 = ORIENTED_EDGE('',*,*,#406478,.F.); +#406519 = ORIENTED_EDGE('',*,*,#405329,.F.); +#406520 = PLANE('',#406521); +#406521 = AXIS2_PLACEMENT_3D('',#406522,#406523,#406524); +#406522 = CARTESIAN_POINT('',(132.553528,-118.270764,0.)); +#406523 = DIRECTION('',(0.811534341453,-0.584304725843,0.)); +#406524 = DIRECTION('',(0.584304725843,0.811534341453,0.)); +#406525 = ADVANCED_FACE('',(#406526),#406537,.F.); +#406526 = FACE_BOUND('',#406527,.F.); +#406527 = EDGE_LOOP('',(#406528,#406529,#406530,#406536)); +#406528 = ORIENTED_EDGE('',*,*,#406497,.T.); +#406529 = ORIENTED_EDGE('',*,*,#405545,.T.); +#406530 = ORIENTED_EDGE('',*,*,#406531,.F.); +#406531 = EDGE_CURVE('',#404863,#405546,#406532,.T.); +#406532 = LINE('',#406533,#406534); +#406533 = CARTESIAN_POINT('',(133.447108,-118.272036,0.)); +#406534 = VECTOR('',#406535,1.); +#406535 = DIRECTION('',(0.,0.,-1.)); +#406536 = ORIENTED_EDGE('',*,*,#404862,.F.); +#406537 = PLANE('',#406538); +#406538 = AXIS2_PLACEMENT_3D('',#406539,#406540,#406541); +#406539 = CARTESIAN_POINT('',(133.446472,-118.270764,0.)); +#406540 = DIRECTION('',(-0.894427191004,-0.447213595492,-0.)); +#406541 = DIRECTION('',(0.447213595492,-0.894427191004,0.)); +#406542 = ADVANCED_FACE('',(#406543),#406554,.F.); +#406543 = FACE_BOUND('',#406544,.F.); +#406544 = EDGE_LOOP('',(#406545,#406551,#406552,#406553)); +#406545 = ORIENTED_EDGE('',*,*,#406546,.T.); +#406546 = EDGE_CURVE('',#405314,#405997,#406547,.T.); +#406547 = LINE('',#406548,#406549); +#406548 = CARTESIAN_POINT('',(132.54937,-118.27808,0.)); +#406549 = VECTOR('',#406550,1.); +#406550 = DIRECTION('',(0.,0.,-1.)); +#406551 = ORIENTED_EDGE('',*,*,#406004,.T.); +#406552 = ORIENTED_EDGE('',*,*,#406512,.F.); +#406553 = ORIENTED_EDGE('',*,*,#405321,.F.); +#406554 = PLANE('',#406555); +#406555 = AXIS2_PLACEMENT_3D('',#406556,#406557,#406558); +#406556 = CARTESIAN_POINT('',(132.54937,-118.27808,0.)); +#406557 = DIRECTION('',(0.86939622862,-0.494115571158,0.)); +#406558 = DIRECTION('',(0.494115571158,0.86939622862,0.)); +#406559 = ADVANCED_FACE('',(#406560),#406571,.T.); +#406560 = FACE_BOUND('',#406561,.F.); +#406561 = EDGE_LOOP('',(#406562,#406563,#406564,#406570)); +#406562 = ORIENTED_EDGE('',*,*,#406531,.T.); +#406563 = ORIENTED_EDGE('',*,*,#405553,.T.); +#406564 = ORIENTED_EDGE('',*,*,#406565,.F.); +#406565 = EDGE_CURVE('',#404871,#405554,#406566,.T.); +#406566 = LINE('',#406567,#406568); +#406567 = CARTESIAN_POINT('',(133.451472,-118.279764,0.)); +#406568 = VECTOR('',#406569,1.); +#406569 = DIRECTION('',(0.,0.,-1.)); +#406570 = ORIENTED_EDGE('',*,*,#404870,.F.); +#406571 = CYLINDRICAL_SURFACE('',#406572,1.589052789649E-02); +#406572 = AXIS2_PLACEMENT_3D('',#406573,#406574,#406575); +#406573 = CARTESIAN_POINT('',(133.43600370232,-118.2834027695,0.)); +#406574 = DIRECTION('',(-0.,-0.,1.)); +#406575 = DIRECTION('',(0.698799797522,0.71531730231,0.)); +#406576 = ADVANCED_FACE('',(#406577),#406588,.F.); +#406577 = FACE_BOUND('',#406578,.F.); +#406578 = EDGE_LOOP('',(#406579,#406585,#406586,#406587)); +#406579 = ORIENTED_EDGE('',*,*,#406580,.T.); +#406580 = EDGE_CURVE('',#405306,#405989,#406581,.T.); +#406581 = LINE('',#406582,#406583); +#406582 = CARTESIAN_POINT('',(132.548528,-118.279764,0.)); +#406583 = VECTOR('',#406584,1.); +#406584 = DIRECTION('',(0.,0.,-1.)); +#406585 = ORIENTED_EDGE('',*,*,#405996,.T.); +#406586 = ORIENTED_EDGE('',*,*,#406546,.F.); +#406587 = ORIENTED_EDGE('',*,*,#405313,.F.); +#406588 = PLANE('',#406589); +#406589 = AXIS2_PLACEMENT_3D('',#406590,#406591,#406592); +#406590 = CARTESIAN_POINT('',(132.548528,-118.279764,0.)); +#406591 = DIRECTION('',(0.894427190998,-0.447213595503,0.)); +#406592 = DIRECTION('',(0.447213595503,0.894427190998,0.)); +#406593 = ADVANCED_FACE('',(#406594),#406605,.F.); +#406594 = FACE_BOUND('',#406595,.F.); +#406595 = EDGE_LOOP('',(#406596,#406597,#406598,#406604)); +#406596 = ORIENTED_EDGE('',*,*,#406565,.T.); +#406597 = ORIENTED_EDGE('',*,*,#405562,.T.); +#406598 = ORIENTED_EDGE('',*,*,#406599,.F.); +#406599 = EDGE_CURVE('',#404880,#405563,#406600,.T.); +#406600 = LINE('',#406601,#406602); +#406601 = CARTESIAN_POINT('',(133.451743,-118.280419,0.)); +#406602 = VECTOR('',#406603,1.); +#406603 = DIRECTION('',(0.,0.,-1.)); +#406604 = ORIENTED_EDGE('',*,*,#404879,.F.); +#406605 = PLANE('',#406606); +#406606 = AXIS2_PLACEMENT_3D('',#406607,#406608,#406609); +#406607 = CARTESIAN_POINT('',(133.451472,-118.279764,0.)); +#406608 = DIRECTION('',(-0.924034018156,-0.382310257894,-0.)); +#406609 = DIRECTION('',(0.382310257894,-0.924034018156,0.)); +#406610 = ADVANCED_FACE('',(#406611),#406622,.F.); +#406611 = FACE_BOUND('',#406612,.F.); +#406612 = EDGE_LOOP('',(#406613,#406619,#406620,#406621)); +#406613 = ORIENTED_EDGE('',*,*,#406614,.T.); +#406614 = EDGE_CURVE('',#405298,#405981,#406615,.T.); +#406615 = LINE('',#406616,#406617); +#406616 = CARTESIAN_POINT('',(132.547,-118.28619,0.)); +#406617 = VECTOR('',#406618,1.); +#406618 = DIRECTION('',(0.,0.,-1.)); +#406619 = ORIENTED_EDGE('',*,*,#405988,.T.); +#406620 = ORIENTED_EDGE('',*,*,#406580,.F.); +#406621 = ORIENTED_EDGE('',*,*,#405305,.F.); +#406622 = PLANE('',#406623); +#406623 = AXIS2_PLACEMENT_3D('',#406624,#406625,#406626); +#406624 = CARTESIAN_POINT('',(132.547,-118.28619,0.)); +#406625 = DIRECTION('',(0.972874398407,-0.231333968374,0.)); +#406626 = DIRECTION('',(0.231333968374,0.972874398407,0.)); +#406627 = ADVANCED_FACE('',(#406628),#406639,.F.); +#406628 = FACE_BOUND('',#406629,.F.); +#406629 = EDGE_LOOP('',(#406630,#406631,#406632,#406638)); +#406630 = ORIENTED_EDGE('',*,*,#406599,.T.); +#406631 = ORIENTED_EDGE('',*,*,#405570,.T.); +#406632 = ORIENTED_EDGE('',*,*,#406633,.F.); +#406633 = EDGE_CURVE('',#404888,#405571,#406634,.T.); +#406634 = LINE('',#406635,#406636); +#406635 = CARTESIAN_POINT('',(133.452743,-118.283419,0.)); +#406636 = VECTOR('',#406637,1.); +#406637 = DIRECTION('',(0.,0.,-1.)); +#406638 = ORIENTED_EDGE('',*,*,#404887,.F.); +#406639 = PLANE('',#406640); +#406640 = AXIS2_PLACEMENT_3D('',#406641,#406642,#406643); +#406641 = CARTESIAN_POINT('',(133.451743,-118.280419,0.)); +#406642 = DIRECTION('',(-0.94868329805,-0.316227766018,-0.)); +#406643 = DIRECTION('',(0.316227766018,-0.94868329805,0.)); +#406644 = ADVANCED_FACE('',(#406645),#406656,.F.); +#406645 = FACE_BOUND('',#406646,.F.); +#406646 = EDGE_LOOP('',(#406647,#406653,#406654,#406655)); +#406647 = ORIENTED_EDGE('',*,*,#406648,.T.); +#406648 = EDGE_CURVE('',#405290,#405973,#406649,.T.); +#406649 = LINE('',#406650,#406651); +#406650 = CARTESIAN_POINT('',(132.546257,-118.288419,0.)); +#406651 = VECTOR('',#406652,1.); +#406652 = DIRECTION('',(0.,0.,-1.)); +#406653 = ORIENTED_EDGE('',*,*,#405980,.T.); +#406654 = ORIENTED_EDGE('',*,*,#406614,.F.); +#406655 = ORIENTED_EDGE('',*,*,#405297,.F.); +#406656 = PLANE('',#406657); +#406657 = AXIS2_PLACEMENT_3D('',#406658,#406659,#406660); +#406658 = CARTESIAN_POINT('',(132.546257,-118.288419,0.)); +#406659 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#406660 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#406661 = ADVANCED_FACE('',(#406662),#406673,.F.); +#406662 = FACE_BOUND('',#406663,.F.); +#406663 = EDGE_LOOP('',(#406664,#406665,#406666,#406672)); +#406664 = ORIENTED_EDGE('',*,*,#406633,.T.); +#406665 = ORIENTED_EDGE('',*,*,#405578,.T.); +#406666 = ORIENTED_EDGE('',*,*,#406667,.F.); +#406667 = EDGE_CURVE('',#404896,#405579,#406668,.T.); +#406668 = LINE('',#406669,#406670); +#406669 = CARTESIAN_POINT('',(133.453,-118.285,0.)); +#406670 = VECTOR('',#406671,1.); +#406671 = DIRECTION('',(0.,0.,-1.)); +#406672 = ORIENTED_EDGE('',*,*,#404895,.F.); +#406673 = PLANE('',#406674); +#406674 = AXIS2_PLACEMENT_3D('',#406675,#406676,#406677); +#406675 = CARTESIAN_POINT('',(133.452743,-118.283419,0.)); +#406676 = DIRECTION('',(-0.987044084569,-0.160449291422,-0.)); +#406677 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#406678 = ADVANCED_FACE('',(#406679),#406690,.F.); +#406679 = FACE_BOUND('',#406680,.F.); +#406680 = EDGE_LOOP('',(#406681,#406687,#406688,#406689)); +#406681 = ORIENTED_EDGE('',*,*,#406682,.T.); +#406682 = EDGE_CURVE('',#405282,#405965,#406683,.T.); +#406683 = LINE('',#406684,#406685); +#406684 = CARTESIAN_POINT('',(132.545257,-118.293419,0.)); +#406685 = VECTOR('',#406686,1.); +#406686 = DIRECTION('',(0.,0.,-1.)); +#406687 = ORIENTED_EDGE('',*,*,#405972,.T.); +#406688 = ORIENTED_EDGE('',*,*,#406648,.F.); +#406689 = ORIENTED_EDGE('',*,*,#405289,.F.); +#406690 = PLANE('',#406691); +#406691 = AXIS2_PLACEMENT_3D('',#406692,#406693,#406694); +#406692 = CARTESIAN_POINT('',(132.545257,-118.293419,0.)); +#406693 = DIRECTION('',(0.980580675691,-0.196116135139,0.)); +#406694 = DIRECTION('',(0.196116135139,0.980580675691,0.)); +#406695 = ADVANCED_FACE('',(#406696),#406707,.F.); +#406696 = FACE_BOUND('',#406697,.F.); +#406697 = EDGE_LOOP('',(#406698,#406699,#406700,#406706)); +#406698 = ORIENTED_EDGE('',*,*,#406667,.T.); +#406699 = ORIENTED_EDGE('',*,*,#405586,.T.); +#406700 = ORIENTED_EDGE('',*,*,#406701,.F.); +#406701 = EDGE_CURVE('',#404904,#405587,#406702,.T.); +#406702 = LINE('',#406703,#406704); +#406703 = CARTESIAN_POINT('',(133.454,-118.29,0.)); +#406704 = VECTOR('',#406705,1.); +#406705 = DIRECTION('',(0.,0.,-1.)); +#406706 = ORIENTED_EDGE('',*,*,#404903,.F.); +#406707 = PLANE('',#406708); +#406708 = AXIS2_PLACEMENT_3D('',#406709,#406710,#406711); +#406709 = CARTESIAN_POINT('',(133.453,-118.285,0.)); +#406710 = DIRECTION('',(-0.980580675691,-0.196116135139,-0.)); +#406711 = DIRECTION('',(0.196116135139,-0.980580675691,0.)); +#406712 = ADVANCED_FACE('',(#406713),#406724,.F.); +#406713 = FACE_BOUND('',#406714,.F.); +#406714 = EDGE_LOOP('',(#406715,#406721,#406722,#406723)); +#406715 = ORIENTED_EDGE('',*,*,#406716,.T.); +#406716 = EDGE_CURVE('',#405274,#405957,#406717,.T.); +#406717 = LINE('',#406718,#406719); +#406718 = CARTESIAN_POINT('',(132.545,-118.295,0.)); +#406719 = VECTOR('',#406720,1.); +#406720 = DIRECTION('',(0.,0.,-1.)); +#406721 = ORIENTED_EDGE('',*,*,#405964,.T.); +#406722 = ORIENTED_EDGE('',*,*,#406682,.F.); +#406723 = ORIENTED_EDGE('',*,*,#405281,.F.); +#406724 = PLANE('',#406725); +#406725 = AXIS2_PLACEMENT_3D('',#406726,#406727,#406728); +#406726 = CARTESIAN_POINT('',(132.545,-118.295,0.)); +#406727 = DIRECTION('',(0.987044084569,-0.160449291422,0.)); +#406728 = DIRECTION('',(0.160449291422,0.987044084569,0.)); +#406729 = ADVANCED_FACE('',(#406730),#406741,.F.); +#406730 = FACE_BOUND('',#406731,.F.); +#406731 = EDGE_LOOP('',(#406732,#406733,#406734,#406740)); +#406732 = ORIENTED_EDGE('',*,*,#406701,.T.); +#406733 = ORIENTED_EDGE('',*,*,#405594,.T.); +#406734 = ORIENTED_EDGE('',*,*,#406735,.F.); +#406735 = EDGE_CURVE('',#404912,#405595,#406736,.T.); +#406736 = LINE('',#406737,#406738); +#406737 = CARTESIAN_POINT('',(133.454,-118.29119,0.)); +#406738 = VECTOR('',#406739,1.); +#406739 = DIRECTION('',(0.,0.,-1.)); +#406740 = ORIENTED_EDGE('',*,*,#404911,.F.); +#406741 = PLANE('',#406742); +#406742 = AXIS2_PLACEMENT_3D('',#406743,#406744,#406745); +#406743 = CARTESIAN_POINT('',(133.454,-118.29,0.)); +#406744 = DIRECTION('',(-1.,-0.,-0.)); +#406745 = DIRECTION('',(0.,-1.,0.)); +#406746 = ADVANCED_FACE('',(#406747),#406758,.F.); +#406747 = FACE_BOUND('',#406748,.F.); +#406748 = EDGE_LOOP('',(#406749,#406755,#406756,#406757)); +#406749 = ORIENTED_EDGE('',*,*,#406750,.T.); +#406750 = EDGE_CURVE('',#405266,#405949,#406751,.T.); +#406751 = LINE('',#406752,#406753); +#406752 = CARTESIAN_POINT('',(132.545,-119.705,0.)); +#406753 = VECTOR('',#406754,1.); +#406754 = DIRECTION('',(0.,0.,-1.)); +#406755 = ORIENTED_EDGE('',*,*,#405956,.T.); +#406756 = ORIENTED_EDGE('',*,*,#406716,.F.); +#406757 = ORIENTED_EDGE('',*,*,#405273,.F.); +#406758 = PLANE('',#406759); +#406759 = AXIS2_PLACEMENT_3D('',#406760,#406761,#406762); +#406760 = CARTESIAN_POINT('',(132.545,-119.705,0.)); +#406761 = DIRECTION('',(1.,-0.,0.)); +#406762 = DIRECTION('',(0.,1.,0.)); +#406763 = ADVANCED_FACE('',(#406764),#406775,.F.); +#406764 = FACE_BOUND('',#406765,.F.); +#406765 = EDGE_LOOP('',(#406766,#406767,#406768,#406774)); +#406766 = ORIENTED_EDGE('',*,*,#406735,.T.); +#406767 = ORIENTED_EDGE('',*,*,#405602,.T.); +#406768 = ORIENTED_EDGE('',*,*,#406769,.F.); +#406769 = EDGE_CURVE('',#404920,#405603,#406770,.T.); +#406770 = LINE('',#406771,#406772); +#406771 = CARTESIAN_POINT('',(133.454743,-118.293419,0.)); +#406772 = VECTOR('',#406773,1.); +#406773 = DIRECTION('',(0.,0.,-1.)); +#406774 = ORIENTED_EDGE('',*,*,#404919,.F.); +#406775 = PLANE('',#406776); +#406776 = AXIS2_PLACEMENT_3D('',#406777,#406778,#406779); +#406777 = CARTESIAN_POINT('',(133.454,-118.29119,0.)); +#406778 = DIRECTION('',(-0.948683298051,-0.316227766017,-0.)); +#406779 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#406780 = ADVANCED_FACE('',(#406781),#406792,.F.); +#406781 = FACE_BOUND('',#406782,.F.); +#406782 = EDGE_LOOP('',(#406783,#406789,#406790,#406791)); +#406783 = ORIENTED_EDGE('',*,*,#406784,.T.); +#406784 = EDGE_CURVE('',#405258,#405941,#406785,.T.); +#406785 = LINE('',#406786,#406787); +#406786 = CARTESIAN_POINT('',(132.545257,-119.706581,0.)); +#406787 = VECTOR('',#406788,1.); +#406788 = DIRECTION('',(0.,0.,-1.)); +#406789 = ORIENTED_EDGE('',*,*,#405948,.T.); +#406790 = ORIENTED_EDGE('',*,*,#406750,.F.); +#406791 = ORIENTED_EDGE('',*,*,#405265,.F.); +#406792 = PLANE('',#406793); +#406793 = AXIS2_PLACEMENT_3D('',#406794,#406795,#406796); +#406794 = CARTESIAN_POINT('',(132.545257,-119.706581,0.)); +#406795 = DIRECTION('',(0.987044084569,0.160449291422,0.)); +#406796 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#406797 = ADVANCED_FACE('',(#406798),#406809,.F.); +#406798 = FACE_BOUND('',#406799,.F.); +#406799 = EDGE_LOOP('',(#406800,#406801,#406802,#406808)); +#406800 = ORIENTED_EDGE('',*,*,#406769,.T.); +#406801 = ORIENTED_EDGE('',*,*,#405610,.T.); +#406802 = ORIENTED_EDGE('',*,*,#406803,.F.); +#406803 = EDGE_CURVE('',#404928,#405611,#406804,.T.); +#406804 = LINE('',#406805,#406806); +#406805 = CARTESIAN_POINT('',(133.455,-118.295,0.)); +#406806 = VECTOR('',#406807,1.); +#406807 = DIRECTION('',(0.,0.,-1.)); +#406808 = ORIENTED_EDGE('',*,*,#404927,.F.); +#406809 = PLANE('',#406810); +#406810 = AXIS2_PLACEMENT_3D('',#406811,#406812,#406813); +#406811 = CARTESIAN_POINT('',(133.454743,-118.293419,0.)); +#406812 = DIRECTION('',(-0.987044084569,-0.160449291422,-0.)); +#406813 = DIRECTION('',(0.160449291422,-0.987044084569,0.)); +#406814 = ADVANCED_FACE('',(#406815),#406826,.F.); +#406815 = FACE_BOUND('',#406816,.F.); +#406816 = EDGE_LOOP('',(#406817,#406823,#406824,#406825)); +#406817 = ORIENTED_EDGE('',*,*,#406818,.T.); +#406818 = EDGE_CURVE('',#405250,#405933,#406819,.T.); +#406819 = LINE('',#406820,#406821); +#406820 = CARTESIAN_POINT('',(132.546,-119.70881,0.)); +#406821 = VECTOR('',#406822,1.); +#406822 = DIRECTION('',(0.,0.,-1.)); +#406823 = ORIENTED_EDGE('',*,*,#405940,.T.); +#406824 = ORIENTED_EDGE('',*,*,#406784,.F.); +#406825 = ORIENTED_EDGE('',*,*,#405257,.F.); +#406826 = PLANE('',#406827); +#406827 = AXIS2_PLACEMENT_3D('',#406828,#406829,#406830); +#406828 = CARTESIAN_POINT('',(132.546,-119.70881,0.)); +#406829 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#406830 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#406831 = ADVANCED_FACE('',(#406832),#406843,.F.); +#406832 = FACE_BOUND('',#406833,.F.); +#406833 = EDGE_LOOP('',(#406834,#406835,#406836,#406842)); +#406834 = ORIENTED_EDGE('',*,*,#406803,.T.); +#406835 = ORIENTED_EDGE('',*,*,#405618,.T.); +#406836 = ORIENTED_EDGE('',*,*,#406837,.F.); +#406837 = EDGE_CURVE('',#404936,#405619,#406838,.T.); +#406838 = LINE('',#406839,#406840); +#406839 = CARTESIAN_POINT('',(133.455,-119.705,0.)); +#406840 = VECTOR('',#406841,1.); +#406841 = DIRECTION('',(0.,0.,-1.)); +#406842 = ORIENTED_EDGE('',*,*,#404935,.F.); +#406843 = PLANE('',#406844); +#406844 = AXIS2_PLACEMENT_3D('',#406845,#406846,#406847); +#406845 = CARTESIAN_POINT('',(133.455,-118.295,0.)); +#406846 = DIRECTION('',(-1.,-0.,-0.)); +#406847 = DIRECTION('',(0.,-1.,0.)); +#406848 = ADVANCED_FACE('',(#406849),#406860,.F.); +#406849 = FACE_BOUND('',#406850,.F.); +#406850 = EDGE_LOOP('',(#406851,#406857,#406858,#406859)); +#406851 = ORIENTED_EDGE('',*,*,#406852,.T.); +#406852 = EDGE_CURVE('',#405242,#405925,#406853,.T.); +#406853 = LINE('',#406854,#406855); +#406854 = CARTESIAN_POINT('',(132.546,-119.71,0.)); +#406855 = VECTOR('',#406856,1.); +#406856 = DIRECTION('',(0.,0.,-1.)); +#406857 = ORIENTED_EDGE('',*,*,#405932,.T.); +#406858 = ORIENTED_EDGE('',*,*,#406818,.F.); +#406859 = ORIENTED_EDGE('',*,*,#405249,.F.); +#406860 = PLANE('',#406861); +#406861 = AXIS2_PLACEMENT_3D('',#406862,#406863,#406864); +#406862 = CARTESIAN_POINT('',(132.546,-119.71,0.)); +#406863 = DIRECTION('',(1.,-0.,0.)); +#406864 = DIRECTION('',(0.,1.,0.)); +#406865 = ADVANCED_FACE('',(#406866),#406877,.F.); +#406866 = FACE_BOUND('',#406867,.F.); +#406867 = EDGE_LOOP('',(#406868,#406869,#406870,#406876)); +#406868 = ORIENTED_EDGE('',*,*,#406837,.T.); +#406869 = ORIENTED_EDGE('',*,*,#405626,.T.); +#406870 = ORIENTED_EDGE('',*,*,#406871,.F.); +#406871 = EDGE_CURVE('',#404944,#405627,#406872,.T.); +#406872 = LINE('',#406873,#406874); +#406873 = CARTESIAN_POINT('',(133.454743,-119.706581,0.)); +#406874 = VECTOR('',#406875,1.); +#406875 = DIRECTION('',(0.,0.,-1.)); +#406876 = ORIENTED_EDGE('',*,*,#404943,.F.); +#406877 = PLANE('',#406878); +#406878 = AXIS2_PLACEMENT_3D('',#406879,#406880,#406881); +#406879 = CARTESIAN_POINT('',(133.455,-119.705,0.)); +#406880 = DIRECTION('',(-0.987044084569,0.160449291422,0.)); +#406881 = DIRECTION('',(-0.160449291422,-0.987044084569,0.)); +#406882 = ADVANCED_FACE('',(#406883),#406894,.F.); +#406883 = FACE_BOUND('',#406884,.F.); +#406884 = EDGE_LOOP('',(#406885,#406891,#406892,#406893)); +#406885 = ORIENTED_EDGE('',*,*,#406886,.T.); +#406886 = EDGE_CURVE('',#405234,#405917,#406887,.T.); +#406887 = LINE('',#406888,#406889); +#406888 = CARTESIAN_POINT('',(132.547,-119.715,0.)); +#406889 = VECTOR('',#406890,1.); +#406890 = DIRECTION('',(0.,0.,-1.)); +#406891 = ORIENTED_EDGE('',*,*,#405924,.T.); +#406892 = ORIENTED_EDGE('',*,*,#406852,.F.); +#406893 = ORIENTED_EDGE('',*,*,#405241,.F.); +#406894 = PLANE('',#406895); +#406895 = AXIS2_PLACEMENT_3D('',#406896,#406897,#406898); +#406896 = CARTESIAN_POINT('',(132.547,-119.715,0.)); +#406897 = DIRECTION('',(0.980580675691,0.196116135139,0.)); +#406898 = DIRECTION('',(-0.196116135139,0.980580675691,0.)); +#406899 = ADVANCED_FACE('',(#406900),#406911,.F.); +#406900 = FACE_BOUND('',#406901,.F.); +#406901 = EDGE_LOOP('',(#406902,#406903,#406904,#406910)); +#406902 = ORIENTED_EDGE('',*,*,#406871,.T.); +#406903 = ORIENTED_EDGE('',*,*,#405634,.T.); +#406904 = ORIENTED_EDGE('',*,*,#406905,.F.); +#406905 = EDGE_CURVE('',#404952,#405635,#406906,.T.); +#406906 = LINE('',#406907,#406908); +#406907 = CARTESIAN_POINT('',(133.453743,-119.711581,0.)); +#406908 = VECTOR('',#406909,1.); +#406909 = DIRECTION('',(0.,0.,-1.)); +#406910 = ORIENTED_EDGE('',*,*,#404951,.F.); +#406911 = PLANE('',#406912); +#406912 = AXIS2_PLACEMENT_3D('',#406913,#406914,#406915); +#406913 = CARTESIAN_POINT('',(133.454743,-119.706581,0.)); +#406914 = DIRECTION('',(-0.980580675691,0.196116135139,0.)); +#406915 = DIRECTION('',(-0.196116135139,-0.980580675691,0.)); +#406916 = ADVANCED_FACE('',(#406917),#406928,.F.); +#406917 = FACE_BOUND('',#406918,.F.); +#406918 = EDGE_LOOP('',(#406919,#406925,#406926,#406927)); +#406919 = ORIENTED_EDGE('',*,*,#406920,.T.); +#406920 = EDGE_CURVE('',#405226,#405909,#406921,.T.); +#406921 = LINE('',#406922,#406923); +#406922 = CARTESIAN_POINT('',(132.547257,-119.716581,0.)); +#406923 = VECTOR('',#406924,1.); +#406924 = DIRECTION('',(0.,0.,-1.)); +#406925 = ORIENTED_EDGE('',*,*,#405916,.T.); +#406926 = ORIENTED_EDGE('',*,*,#406886,.F.); +#406927 = ORIENTED_EDGE('',*,*,#405233,.F.); +#406928 = PLANE('',#406929); +#406929 = AXIS2_PLACEMENT_3D('',#406930,#406931,#406932); +#406930 = CARTESIAN_POINT('',(132.547257,-119.716581,0.)); +#406931 = DIRECTION('',(0.987044084569,0.160449291422,0.)); +#406932 = DIRECTION('',(-0.160449291422,0.987044084569,0.)); +#406933 = ADVANCED_FACE('',(#406934),#406945,.F.); +#406934 = FACE_BOUND('',#406935,.F.); +#406935 = EDGE_LOOP('',(#406936,#406937,#406938,#406944)); +#406936 = ORIENTED_EDGE('',*,*,#406905,.T.); +#406937 = ORIENTED_EDGE('',*,*,#405642,.T.); +#406938 = ORIENTED_EDGE('',*,*,#406939,.F.); +#406939 = EDGE_CURVE('',#404960,#405643,#406940,.T.); +#406940 = LINE('',#406941,#406942); +#406941 = CARTESIAN_POINT('',(133.453,-119.71381,0.)); +#406942 = VECTOR('',#406943,1.); +#406943 = DIRECTION('',(0.,0.,-1.)); +#406944 = ORIENTED_EDGE('',*,*,#404959,.F.); +#406945 = PLANE('',#406946); +#406946 = AXIS2_PLACEMENT_3D('',#406947,#406948,#406949); +#406947 = CARTESIAN_POINT('',(133.453743,-119.711581,0.)); +#406948 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#406949 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#406950 = ADVANCED_FACE('',(#406951),#406962,.F.); +#406951 = FACE_BOUND('',#406952,.F.); +#406952 = EDGE_LOOP('',(#406953,#406959,#406960,#406961)); +#406953 = ORIENTED_EDGE('',*,*,#406954,.T.); +#406954 = EDGE_CURVE('',#405218,#405901,#406955,.T.); +#406955 = LINE('',#406956,#406957); +#406956 = CARTESIAN_POINT('',(132.548257,-119.719581,0.)); +#406957 = VECTOR('',#406958,1.); +#406958 = DIRECTION('',(0.,0.,-1.)); +#406959 = ORIENTED_EDGE('',*,*,#405908,.T.); +#406960 = ORIENTED_EDGE('',*,*,#406920,.F.); +#406961 = ORIENTED_EDGE('',*,*,#405225,.F.); +#406962 = PLANE('',#406963); +#406963 = AXIS2_PLACEMENT_3D('',#406964,#406965,#406966); +#406964 = CARTESIAN_POINT('',(132.548257,-119.719581,0.)); +#406965 = DIRECTION('',(0.94868329805,0.316227766018,0.)); +#406966 = DIRECTION('',(-0.316227766018,0.94868329805,0.)); +#406967 = ADVANCED_FACE('',(#406968),#406979,.F.); +#406968 = FACE_BOUND('',#406969,.F.); +#406969 = EDGE_LOOP('',(#406970,#406971,#406972,#406978)); +#406970 = ORIENTED_EDGE('',*,*,#406939,.T.); +#406971 = ORIENTED_EDGE('',*,*,#405650,.T.); +#406972 = ORIENTED_EDGE('',*,*,#406973,.F.); +#406973 = EDGE_CURVE('',#404968,#405651,#406974,.T.); +#406974 = LINE('',#406975,#406976); +#406975 = CARTESIAN_POINT('',(133.451472,-119.720236,0.)); +#406976 = VECTOR('',#406977,1.); +#406977 = DIRECTION('',(0.,0.,-1.)); +#406978 = ORIENTED_EDGE('',*,*,#404967,.F.); +#406979 = PLANE('',#406980); +#406980 = AXIS2_PLACEMENT_3D('',#406981,#406982,#406983); +#406981 = CARTESIAN_POINT('',(133.453,-119.71381,0.)); +#406982 = DIRECTION('',(-0.972874398407,0.231333968374,0.)); +#406983 = DIRECTION('',(-0.231333968374,-0.972874398407,0.)); +#406984 = ADVANCED_FACE('',(#406985),#406996,.F.); +#406985 = FACE_BOUND('',#406986,.F.); +#406986 = EDGE_LOOP('',(#406987,#406993,#406994,#406995)); +#406987 = ORIENTED_EDGE('',*,*,#406988,.T.); +#406988 = EDGE_CURVE('',#405209,#405892,#406989,.T.); +#406989 = LINE('',#406990,#406991); +#406990 = CARTESIAN_POINT('',(132.548528,-119.720236,0.)); +#406991 = VECTOR('',#406992,1.); +#406992 = DIRECTION('',(0.,0.,-1.)); +#406993 = ORIENTED_EDGE('',*,*,#405900,.T.); +#406994 = ORIENTED_EDGE('',*,*,#406954,.F.); +#406995 = ORIENTED_EDGE('',*,*,#405217,.F.); +#406996 = PLANE('',#406997); +#406997 = AXIS2_PLACEMENT_3D('',#406998,#406999,#407000); +#406998 = CARTESIAN_POINT('',(132.548528,-119.720236,0.)); +#406999 = DIRECTION('',(0.924034018156,0.382310257894,0.)); +#407000 = DIRECTION('',(-0.382310257894,0.924034018156,0.)); +#407001 = ADVANCED_FACE('',(#407002),#407013,.F.); +#407002 = FACE_BOUND('',#407003,.F.); +#407003 = EDGE_LOOP('',(#407004,#407005,#407006,#407012)); +#407004 = ORIENTED_EDGE('',*,*,#406973,.T.); +#407005 = ORIENTED_EDGE('',*,*,#405658,.T.); +#407006 = ORIENTED_EDGE('',*,*,#407007,.F.); +#407007 = EDGE_CURVE('',#404976,#405659,#407008,.T.); +#407008 = LINE('',#407009,#407010); +#407009 = CARTESIAN_POINT('',(133.45063,-119.72192,0.)); +#407010 = VECTOR('',#407011,1.); +#407011 = DIRECTION('',(0.,0.,-1.)); +#407012 = ORIENTED_EDGE('',*,*,#404975,.F.); +#407013 = PLANE('',#407014); +#407014 = AXIS2_PLACEMENT_3D('',#407015,#407016,#407017); +#407015 = CARTESIAN_POINT('',(133.451472,-119.720236,0.)); +#407016 = DIRECTION('',(-0.894427190998,0.447213595503,0.)); +#407017 = DIRECTION('',(-0.447213595503,-0.894427190998,0.)); +#407018 = ADVANCED_FACE('',(#407019),#407030,.T.); +#407019 = FACE_BOUND('',#407020,.F.); +#407020 = EDGE_LOOP('',(#407021,#407027,#407028,#407029)); +#407021 = ORIENTED_EDGE('',*,*,#407022,.T.); +#407022 = EDGE_CURVE('',#405201,#405884,#407023,.T.); +#407023 = LINE('',#407024,#407025); +#407024 = CARTESIAN_POINT('',(132.552892,-119.727964,0.)); +#407025 = VECTOR('',#407026,1.); +#407026 = DIRECTION('',(0.,0.,-1.)); +#407027 = ORIENTED_EDGE('',*,*,#405891,.T.); +#407028 = ORIENTED_EDGE('',*,*,#406988,.F.); +#407029 = ORIENTED_EDGE('',*,*,#405208,.F.); +#407030 = CYLINDRICAL_SURFACE('',#407031,1.589052789649E-02); +#407031 = AXIS2_PLACEMENT_3D('',#407032,#407033,#407034); +#407032 = CARTESIAN_POINT('',(132.56399629767,-119.7165972304,0.)); +#407033 = DIRECTION('',(-0.,-0.,1.)); +#407034 = DIRECTION('',(-0.698799797522,-0.71531730231,-0.)); +#407035 = ADVANCED_FACE('',(#407036),#407047,.F.); +#407036 = FACE_BOUND('',#407037,.F.); +#407037 = EDGE_LOOP('',(#407038,#407039,#407040,#407046)); +#407038 = ORIENTED_EDGE('',*,*,#407007,.T.); +#407039 = ORIENTED_EDGE('',*,*,#405666,.T.); +#407040 = ORIENTED_EDGE('',*,*,#407041,.F.); +#407041 = EDGE_CURVE('',#404984,#405667,#407042,.T.); +#407042 = LINE('',#407043,#407044); +#407043 = CARTESIAN_POINT('',(133.446472,-119.729236,0.)); +#407044 = VECTOR('',#407045,1.); +#407045 = DIRECTION('',(0.,0.,-1.)); +#407046 = ORIENTED_EDGE('',*,*,#404983,.F.); +#407047 = PLANE('',#407048); +#407048 = AXIS2_PLACEMENT_3D('',#407049,#407050,#407051); +#407049 = CARTESIAN_POINT('',(133.45063,-119.72192,0.)); +#407050 = DIRECTION('',(-0.86939622862,0.494115571158,0.)); +#407051 = DIRECTION('',(-0.494115571158,-0.86939622862,0.)); +#407052 = ADVANCED_FACE('',(#407053),#407064,.F.); +#407053 = FACE_BOUND('',#407054,.F.); +#407054 = EDGE_LOOP('',(#407055,#407061,#407062,#407063)); +#407055 = ORIENTED_EDGE('',*,*,#407056,.T.); +#407056 = EDGE_CURVE('',#405193,#405876,#407057,.T.); +#407057 = LINE('',#407058,#407059); +#407058 = CARTESIAN_POINT('',(132.553528,-119.729236,0.)); +#407059 = VECTOR('',#407060,1.); +#407060 = DIRECTION('',(0.,0.,-1.)); +#407061 = ORIENTED_EDGE('',*,*,#405883,.T.); +#407062 = ORIENTED_EDGE('',*,*,#407022,.F.); +#407063 = ORIENTED_EDGE('',*,*,#405200,.F.); +#407064 = PLANE('',#407065); +#407065 = AXIS2_PLACEMENT_3D('',#407066,#407067,#407068); +#407066 = CARTESIAN_POINT('',(132.553528,-119.729236,0.)); +#407067 = DIRECTION('',(0.894427191004,0.447213595492,0.)); +#407068 = DIRECTION('',(-0.447213595492,0.894427191004,0.)); +#407069 = ADVANCED_FACE('',(#407070),#407081,.F.); +#407070 = FACE_BOUND('',#407071,.F.); +#407071 = EDGE_LOOP('',(#407072,#407073,#407074,#407080)); +#407072 = ORIENTED_EDGE('',*,*,#407041,.T.); +#407073 = ORIENTED_EDGE('',*,*,#405674,.T.); +#407074 = ORIENTED_EDGE('',*,*,#407075,.F.); +#407075 = EDGE_CURVE('',#404992,#405675,#407076,.T.); +#407076 = LINE('',#407077,#407078); +#407077 = CARTESIAN_POINT('',(133.445536,-119.730536,0.)); +#407078 = VECTOR('',#407079,1.); +#407079 = DIRECTION('',(0.,0.,-1.)); +#407080 = ORIENTED_EDGE('',*,*,#404991,.F.); +#407081 = PLANE('',#407082); +#407082 = AXIS2_PLACEMENT_3D('',#407083,#407084,#407085); +#407083 = CARTESIAN_POINT('',(133.446472,-119.729236,0.)); +#407084 = DIRECTION('',(-0.811534341453,0.584304725843,0.)); +#407085 = DIRECTION('',(-0.584304725843,-0.811534341453,0.)); +#407086 = ADVANCED_FACE('',(#407087),#407098,.F.); +#407087 = FACE_BOUND('',#407088,.F.); +#407088 = EDGE_LOOP('',(#407089,#407095,#407096,#407097)); +#407089 = ORIENTED_EDGE('',*,*,#407090,.T.); +#407090 = EDGE_CURVE('',#405185,#405868,#407091,.T.); +#407091 = LINE('',#407092,#407093); +#407092 = CARTESIAN_POINT('',(132.556528,-119.733236,0.)); +#407093 = VECTOR('',#407094,1.); +#407094 = DIRECTION('',(0.,0.,-1.)); +#407095 = ORIENTED_EDGE('',*,*,#405875,.T.); +#407096 = ORIENTED_EDGE('',*,*,#407056,.F.); +#407097 = ORIENTED_EDGE('',*,*,#405192,.F.); +#407098 = PLANE('',#407099); +#407099 = AXIS2_PLACEMENT_3D('',#407100,#407101,#407102); +#407100 = CARTESIAN_POINT('',(132.556528,-119.733236,0.)); +#407101 = DIRECTION('',(0.800000000002,0.599999999998,0.)); +#407102 = DIRECTION('',(-0.599999999998,0.800000000002,0.)); +#407103 = ADVANCED_FACE('',(#407104),#407115,.F.); +#407104 = FACE_BOUND('',#407105,.F.); +#407105 = EDGE_LOOP('',(#407106,#407107,#407108,#407114)); +#407106 = ORIENTED_EDGE('',*,*,#407075,.T.); +#407107 = ORIENTED_EDGE('',*,*,#405682,.T.); +#407108 = ORIENTED_EDGE('',*,*,#407109,.F.); +#407109 = EDGE_CURVE('',#405000,#405683,#407110,.T.); +#407110 = LINE('',#407111,#407112); +#407111 = CARTESIAN_POINT('',(133.442536,-119.734536,0.)); +#407112 = VECTOR('',#407113,1.); +#407113 = DIRECTION('',(0.,0.,-1.)); +#407114 = ORIENTED_EDGE('',*,*,#404999,.F.); +#407115 = PLANE('',#407116); +#407116 = AXIS2_PLACEMENT_3D('',#407117,#407118,#407119); +#407117 = CARTESIAN_POINT('',(133.445536,-119.730536,0.)); +#407118 = DIRECTION('',(-0.799999999999,0.600000000001,0.)); +#407119 = DIRECTION('',(-0.600000000001,-0.799999999999,0.)); +#407120 = ADVANCED_FACE('',(#407121),#407132,.F.); +#407121 = FACE_BOUND('',#407122,.F.); +#407122 = EDGE_LOOP('',(#407123,#407129,#407130,#407131)); +#407123 = ORIENTED_EDGE('',*,*,#407124,.T.); +#407124 = EDGE_CURVE('',#405177,#405860,#407125,.T.); +#407125 = LINE('',#407126,#407127); +#407126 = CARTESIAN_POINT('',(132.557464,-119.734536,0.)); +#407127 = VECTOR('',#407128,1.); +#407128 = DIRECTION('',(0.,0.,-1.)); +#407129 = ORIENTED_EDGE('',*,*,#405867,.T.); +#407130 = ORIENTED_EDGE('',*,*,#407090,.F.); +#407131 = ORIENTED_EDGE('',*,*,#405184,.F.); +#407132 = PLANE('',#407133); +#407133 = AXIS2_PLACEMENT_3D('',#407134,#407135,#407136); +#407134 = CARTESIAN_POINT('',(132.557464,-119.734536,0.)); +#407135 = DIRECTION('',(0.811534341444,0.584304725855,0.)); +#407136 = DIRECTION('',(-0.584304725855,0.811534341444,0.)); +#407137 = ADVANCED_FACE('',(#407138),#407149,.F.); +#407138 = FACE_BOUND('',#407139,.F.); +#407139 = EDGE_LOOP('',(#407140,#407141,#407142,#407148)); +#407140 = ORIENTED_EDGE('',*,*,#407109,.T.); +#407141 = ORIENTED_EDGE('',*,*,#405690,.T.); +#407142 = ORIENTED_EDGE('',*,*,#407143,.F.); +#407143 = EDGE_CURVE('',#405008,#405691,#407144,.T.); +#407144 = LINE('',#407145,#407146); +#407145 = CARTESIAN_POINT('',(133.434536,-119.742536,0.)); +#407146 = VECTOR('',#407147,1.); +#407147 = DIRECTION('',(0.,0.,-1.)); +#407148 = ORIENTED_EDGE('',*,*,#405007,.F.); +#407149 = PLANE('',#407150); +#407150 = AXIS2_PLACEMENT_3D('',#407151,#407152,#407153); +#407151 = CARTESIAN_POINT('',(133.442536,-119.734536,0.)); +#407152 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#407153 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#407154 = ADVANCED_FACE('',(#407155),#407166,.F.); +#407155 = FACE_BOUND('',#407156,.F.); +#407156 = EDGE_LOOP('',(#407157,#407163,#407164,#407165)); +#407157 = ORIENTED_EDGE('',*,*,#407158,.T.); +#407158 = EDGE_CURVE('',#405169,#405852,#407159,.T.); +#407159 = LINE('',#407160,#407161); +#407160 = CARTESIAN_POINT('',(132.565464,-119.742536,0.)); +#407161 = VECTOR('',#407162,1.); +#407162 = DIRECTION('',(0.,0.,-1.)); +#407163 = ORIENTED_EDGE('',*,*,#405859,.T.); +#407164 = ORIENTED_EDGE('',*,*,#407124,.F.); +#407165 = ORIENTED_EDGE('',*,*,#405176,.F.); +#407166 = PLANE('',#407167); +#407167 = AXIS2_PLACEMENT_3D('',#407168,#407169,#407170); +#407168 = CARTESIAN_POINT('',(132.565464,-119.742536,0.)); +#407169 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#407170 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#407171 = ADVANCED_FACE('',(#407172),#407183,.F.); +#407172 = FACE_BOUND('',#407173,.F.); +#407173 = EDGE_LOOP('',(#407174,#407175,#407176,#407182)); +#407174 = ORIENTED_EDGE('',*,*,#407143,.T.); +#407175 = ORIENTED_EDGE('',*,*,#405698,.T.); +#407176 = ORIENTED_EDGE('',*,*,#407177,.F.); +#407177 = EDGE_CURVE('',#405016,#405699,#407178,.T.); +#407178 = LINE('',#407179,#407180); +#407179 = CARTESIAN_POINT('',(133.433236,-119.743472,0.)); +#407180 = VECTOR('',#407181,1.); +#407181 = DIRECTION('',(0.,0.,-1.)); +#407182 = ORIENTED_EDGE('',*,*,#405015,.F.); +#407183 = PLANE('',#407184); +#407184 = AXIS2_PLACEMENT_3D('',#407185,#407186,#407187); +#407185 = CARTESIAN_POINT('',(133.434536,-119.742536,0.)); +#407186 = DIRECTION('',(-0.584304725839,0.811534341456,0.)); +#407187 = DIRECTION('',(-0.811534341456,-0.584304725839,0.)); +#407188 = ADVANCED_FACE('',(#407189),#407200,.F.); +#407189 = FACE_BOUND('',#407190,.F.); +#407190 = EDGE_LOOP('',(#407191,#407197,#407198,#407199)); +#407191 = ORIENTED_EDGE('',*,*,#407192,.T.); +#407192 = EDGE_CURVE('',#405161,#405844,#407193,.T.); +#407193 = LINE('',#407194,#407195); +#407194 = CARTESIAN_POINT('',(132.569464,-119.745536,0.)); +#407195 = VECTOR('',#407196,1.); +#407196 = DIRECTION('',(0.,0.,-1.)); +#407197 = ORIENTED_EDGE('',*,*,#405851,.T.); +#407198 = ORIENTED_EDGE('',*,*,#407158,.F.); +#407199 = ORIENTED_EDGE('',*,*,#405168,.F.); +#407200 = PLANE('',#407201); +#407201 = AXIS2_PLACEMENT_3D('',#407202,#407203,#407204); +#407202 = CARTESIAN_POINT('',(132.569464,-119.745536,0.)); +#407203 = DIRECTION('',(0.599999999998,0.800000000001,0.)); +#407204 = DIRECTION('',(-0.800000000001,0.599999999998,0.)); +#407205 = ADVANCED_FACE('',(#407206),#407217,.F.); +#407206 = FACE_BOUND('',#407207,.F.); +#407207 = EDGE_LOOP('',(#407208,#407209,#407210,#407216)); +#407208 = ORIENTED_EDGE('',*,*,#407177,.T.); +#407209 = ORIENTED_EDGE('',*,*,#405706,.T.); +#407210 = ORIENTED_EDGE('',*,*,#407211,.F.); +#407211 = EDGE_CURVE('',#405024,#405707,#407212,.T.); +#407212 = LINE('',#407213,#407214); +#407213 = CARTESIAN_POINT('',(133.429236,-119.746472,0.)); +#407214 = VECTOR('',#407215,1.); +#407215 = DIRECTION('',(0.,0.,-1.)); +#407216 = ORIENTED_EDGE('',*,*,#405023,.F.); +#407217 = PLANE('',#407218); +#407218 = AXIS2_PLACEMENT_3D('',#407219,#407220,#407221); +#407219 = CARTESIAN_POINT('',(133.433236,-119.743472,0.)); +#407220 = DIRECTION('',(-0.600000000001,0.799999999999,0.)); +#407221 = DIRECTION('',(-0.799999999999,-0.600000000001,0.)); +#407222 = ADVANCED_FACE('',(#407223),#407234,.F.); +#407223 = FACE_BOUND('',#407224,.F.); +#407224 = EDGE_LOOP('',(#407225,#407231,#407232,#407233)); +#407225 = ORIENTED_EDGE('',*,*,#407226,.T.); +#407226 = EDGE_CURVE('',#405153,#405836,#407227,.T.); +#407227 = LINE('',#407228,#407229); +#407228 = CARTESIAN_POINT('',(132.570764,-119.746472,0.)); +#407229 = VECTOR('',#407230,1.); +#407230 = DIRECTION('',(0.,0.,-1.)); +#407231 = ORIENTED_EDGE('',*,*,#405843,.T.); +#407232 = ORIENTED_EDGE('',*,*,#407192,.F.); +#407233 = ORIENTED_EDGE('',*,*,#405160,.F.); +#407234 = PLANE('',#407235); +#407235 = AXIS2_PLACEMENT_3D('',#407236,#407237,#407238); +#407236 = CARTESIAN_POINT('',(132.570764,-119.746472,0.)); +#407237 = DIRECTION('',(0.584304725847,0.81153434145,0.)); +#407238 = DIRECTION('',(-0.81153434145,0.584304725847,0.)); +#407239 = ADVANCED_FACE('',(#407240),#407251,.F.); +#407240 = FACE_BOUND('',#407241,.F.); +#407241 = EDGE_LOOP('',(#407242,#407243,#407244,#407250)); +#407242 = ORIENTED_EDGE('',*,*,#407211,.T.); +#407243 = ORIENTED_EDGE('',*,*,#405714,.T.); +#407244 = ORIENTED_EDGE('',*,*,#407245,.F.); +#407245 = EDGE_CURVE('',#405032,#405715,#407246,.T.); +#407246 = LINE('',#407247,#407248); +#407247 = CARTESIAN_POINT('',(133.427964,-119.747108,0.)); +#407248 = VECTOR('',#407249,1.); +#407249 = DIRECTION('',(0.,0.,-1.)); +#407250 = ORIENTED_EDGE('',*,*,#405031,.F.); +#407251 = PLANE('',#407252); +#407252 = AXIS2_PLACEMENT_3D('',#407253,#407254,#407255); +#407253 = CARTESIAN_POINT('',(133.429236,-119.746472,0.)); +#407254 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#407255 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#407256 = ADVANCED_FACE('',(#407257),#407268,.F.); +#407257 = FACE_BOUND('',#407258,.F.); +#407258 = EDGE_LOOP('',(#407259,#407265,#407266,#407267)); +#407259 = ORIENTED_EDGE('',*,*,#407260,.T.); +#407260 = EDGE_CURVE('',#405145,#405828,#407261,.T.); +#407261 = LINE('',#407262,#407263); +#407262 = CARTESIAN_POINT('',(132.57808,-119.75063,0.)); +#407263 = VECTOR('',#407264,1.); +#407264 = DIRECTION('',(0.,0.,-1.)); +#407265 = ORIENTED_EDGE('',*,*,#405835,.T.); +#407266 = ORIENTED_EDGE('',*,*,#407226,.F.); +#407267 = ORIENTED_EDGE('',*,*,#405152,.F.); +#407268 = PLANE('',#407269); +#407269 = AXIS2_PLACEMENT_3D('',#407270,#407271,#407272); +#407270 = CARTESIAN_POINT('',(132.57808,-119.75063,0.)); +#407271 = DIRECTION('',(0.494115571159,0.86939622862,0.)); +#407272 = DIRECTION('',(-0.86939622862,0.494115571159,0.)); +#407273 = ADVANCED_FACE('',(#407274),#407285,.T.); +#407274 = FACE_BOUND('',#407275,.F.); +#407275 = EDGE_LOOP('',(#407276,#407277,#407278,#407284)); +#407276 = ORIENTED_EDGE('',*,*,#407245,.T.); +#407277 = ORIENTED_EDGE('',*,*,#405722,.T.); +#407278 = ORIENTED_EDGE('',*,*,#407279,.F.); +#407279 = EDGE_CURVE('',#405040,#405723,#407280,.T.); +#407280 = LINE('',#407281,#407282); +#407281 = CARTESIAN_POINT('',(133.420236,-119.751472,0.)); +#407282 = VECTOR('',#407283,1.); +#407283 = DIRECTION('',(0.,0.,-1.)); +#407284 = ORIENTED_EDGE('',*,*,#405039,.F.); +#407285 = CYLINDRICAL_SURFACE('',#407286,1.589052789719E-02); +#407286 = AXIS2_PLACEMENT_3D('',#407287,#407288,#407289); +#407287 = CARTESIAN_POINT('',(133.41659723045,-119.7360037023,0.)); +#407288 = DIRECTION('',(-0.,-0.,1.)); +#407289 = DIRECTION('',(0.7153173023,-0.698799797531,0.)); +#407290 = ADVANCED_FACE('',(#407291),#407302,.F.); +#407291 = FACE_BOUND('',#407292,.F.); +#407292 = EDGE_LOOP('',(#407293,#407299,#407300,#407301)); +#407293 = ORIENTED_EDGE('',*,*,#407294,.T.); +#407294 = EDGE_CURVE('',#405137,#405820,#407295,.T.); +#407295 = LINE('',#407296,#407297); +#407296 = CARTESIAN_POINT('',(132.579764,-119.751472,0.)); +#407297 = VECTOR('',#407298,1.); +#407298 = DIRECTION('',(0.,0.,-1.)); +#407299 = ORIENTED_EDGE('',*,*,#405827,.T.); +#407300 = ORIENTED_EDGE('',*,*,#407260,.F.); +#407301 = ORIENTED_EDGE('',*,*,#405144,.F.); +#407302 = PLANE('',#407303); +#407303 = AXIS2_PLACEMENT_3D('',#407304,#407305,#407306); +#407304 = CARTESIAN_POINT('',(132.579764,-119.751472,0.)); +#407305 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#407306 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#407307 = ADVANCED_FACE('',(#407308),#407319,.F.); +#407308 = FACE_BOUND('',#407309,.F.); +#407309 = EDGE_LOOP('',(#407310,#407311,#407312,#407318)); +#407310 = ORIENTED_EDGE('',*,*,#407279,.T.); +#407311 = ORIENTED_EDGE('',*,*,#405731,.T.); +#407312 = ORIENTED_EDGE('',*,*,#407313,.F.); +#407313 = EDGE_CURVE('',#405049,#405732,#407314,.T.); +#407314 = LINE('',#407315,#407316); +#407315 = CARTESIAN_POINT('',(133.419581,-119.751743,0.)); +#407316 = VECTOR('',#407317,1.); +#407317 = DIRECTION('',(0.,0.,-1.)); +#407318 = ORIENTED_EDGE('',*,*,#405048,.F.); +#407319 = PLANE('',#407320); +#407320 = AXIS2_PLACEMENT_3D('',#407321,#407322,#407323); +#407321 = CARTESIAN_POINT('',(133.420236,-119.751472,0.)); +#407322 = DIRECTION('',(-0.382310257894,0.924034018156,0.)); +#407323 = DIRECTION('',(-0.924034018156,-0.382310257894,0.)); +#407324 = ADVANCED_FACE('',(#407325),#407336,.F.); +#407325 = FACE_BOUND('',#407326,.F.); +#407326 = EDGE_LOOP('',(#407327,#407333,#407334,#407335)); +#407327 = ORIENTED_EDGE('',*,*,#407328,.T.); +#407328 = EDGE_CURVE('',#405129,#405812,#407329,.T.); +#407329 = LINE('',#407330,#407331); +#407330 = CARTESIAN_POINT('',(132.58619,-119.753,0.)); +#407331 = VECTOR('',#407332,1.); +#407332 = DIRECTION('',(0.,0.,-1.)); +#407333 = ORIENTED_EDGE('',*,*,#405819,.T.); +#407334 = ORIENTED_EDGE('',*,*,#407294,.F.); +#407335 = ORIENTED_EDGE('',*,*,#405136,.F.); +#407336 = PLANE('',#407337); +#407337 = AXIS2_PLACEMENT_3D('',#407338,#407339,#407340); +#407338 = CARTESIAN_POINT('',(132.58619,-119.753,0.)); +#407339 = DIRECTION('',(0.231333968373,0.972874398407,0.)); +#407340 = DIRECTION('',(-0.972874398407,0.231333968373,0.)); +#407341 = ADVANCED_FACE('',(#407342),#407353,.F.); +#407342 = FACE_BOUND('',#407343,.F.); +#407343 = EDGE_LOOP('',(#407344,#407345,#407346,#407352)); +#407344 = ORIENTED_EDGE('',*,*,#407313,.T.); +#407345 = ORIENTED_EDGE('',*,*,#405739,.T.); +#407346 = ORIENTED_EDGE('',*,*,#407347,.F.); +#407347 = EDGE_CURVE('',#405057,#405740,#407348,.T.); +#407348 = LINE('',#407349,#407350); +#407349 = CARTESIAN_POINT('',(133.416581,-119.752743,0.)); +#407350 = VECTOR('',#407351,1.); +#407351 = DIRECTION('',(0.,0.,-1.)); +#407352 = ORIENTED_EDGE('',*,*,#405056,.F.); +#407353 = PLANE('',#407354); +#407354 = AXIS2_PLACEMENT_3D('',#407355,#407356,#407357); +#407355 = CARTESIAN_POINT('',(133.419581,-119.751743,0.)); +#407356 = DIRECTION('',(-0.316227766015,0.948683298051,0.)); +#407357 = DIRECTION('',(-0.948683298051,-0.316227766015,0.)); +#407358 = ADVANCED_FACE('',(#407359),#407370,.F.); +#407359 = FACE_BOUND('',#407360,.F.); +#407360 = EDGE_LOOP('',(#407361,#407367,#407368,#407369)); +#407361 = ORIENTED_EDGE('',*,*,#407362,.T.); +#407362 = EDGE_CURVE('',#405121,#405804,#407363,.T.); +#407363 = LINE('',#407364,#407365); +#407364 = CARTESIAN_POINT('',(132.588419,-119.753743,0.)); +#407365 = VECTOR('',#407366,1.); +#407366 = DIRECTION('',(0.,0.,-1.)); +#407367 = ORIENTED_EDGE('',*,*,#405811,.T.); +#407368 = ORIENTED_EDGE('',*,*,#407328,.F.); +#407369 = ORIENTED_EDGE('',*,*,#405128,.F.); +#407370 = PLANE('',#407371); +#407371 = AXIS2_PLACEMENT_3D('',#407372,#407373,#407374); +#407372 = CARTESIAN_POINT('',(132.588419,-119.753743,0.)); +#407373 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#407374 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#407375 = ADVANCED_FACE('',(#407376),#407387,.F.); +#407376 = FACE_BOUND('',#407377,.F.); +#407377 = EDGE_LOOP('',(#407378,#407379,#407380,#407386)); +#407378 = ORIENTED_EDGE('',*,*,#407347,.T.); +#407379 = ORIENTED_EDGE('',*,*,#405747,.T.); +#407380 = ORIENTED_EDGE('',*,*,#407381,.F.); +#407381 = EDGE_CURVE('',#405065,#405748,#407382,.T.); +#407382 = LINE('',#407383,#407384); +#407383 = CARTESIAN_POINT('',(133.415,-119.753,0.)); +#407384 = VECTOR('',#407385,1.); +#407385 = DIRECTION('',(0.,0.,-1.)); +#407386 = ORIENTED_EDGE('',*,*,#405064,.F.); +#407387 = PLANE('',#407388); +#407388 = AXIS2_PLACEMENT_3D('',#407389,#407390,#407391); +#407389 = CARTESIAN_POINT('',(133.416581,-119.752743,0.)); +#407390 = DIRECTION('',(-0.160449291421,0.987044084569,0.)); +#407391 = DIRECTION('',(-0.987044084569,-0.160449291421,0.)); +#407392 = ADVANCED_FACE('',(#407393),#407404,.F.); +#407393 = FACE_BOUND('',#407394,.F.); +#407394 = EDGE_LOOP('',(#407395,#407401,#407402,#407403)); +#407395 = ORIENTED_EDGE('',*,*,#407396,.T.); +#407396 = EDGE_CURVE('',#405113,#405796,#407397,.T.); +#407397 = LINE('',#407398,#407399); +#407398 = CARTESIAN_POINT('',(132.593419,-119.754743,0.)); +#407399 = VECTOR('',#407400,1.); +#407400 = DIRECTION('',(0.,0.,-1.)); +#407401 = ORIENTED_EDGE('',*,*,#405803,.T.); +#407402 = ORIENTED_EDGE('',*,*,#407362,.F.); +#407403 = ORIENTED_EDGE('',*,*,#405120,.F.); +#407404 = PLANE('',#407405); +#407405 = AXIS2_PLACEMENT_3D('',#407406,#407407,#407408); +#407406 = CARTESIAN_POINT('',(132.593419,-119.754743,0.)); +#407407 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#407408 = DIRECTION('',(-0.980580675691,0.196116135138,0.)); +#407409 = ADVANCED_FACE('',(#407410),#407421,.F.); +#407410 = FACE_BOUND('',#407411,.F.); +#407411 = EDGE_LOOP('',(#407412,#407413,#407414,#407420)); +#407412 = ORIENTED_EDGE('',*,*,#407381,.T.); +#407413 = ORIENTED_EDGE('',*,*,#405755,.T.); +#407414 = ORIENTED_EDGE('',*,*,#407415,.F.); +#407415 = EDGE_CURVE('',#405073,#405756,#407416,.T.); +#407416 = LINE('',#407417,#407418); +#407417 = CARTESIAN_POINT('',(133.41,-119.754,0.)); +#407418 = VECTOR('',#407419,1.); +#407419 = DIRECTION('',(0.,0.,-1.)); +#407420 = ORIENTED_EDGE('',*,*,#405072,.F.); +#407421 = PLANE('',#407422); +#407422 = AXIS2_PLACEMENT_3D('',#407423,#407424,#407425); +#407423 = CARTESIAN_POINT('',(133.415,-119.753,0.)); +#407424 = DIRECTION('',(-0.196116135139,0.980580675691,0.)); +#407425 = DIRECTION('',(-0.980580675691,-0.196116135139,0.)); +#407426 = ADVANCED_FACE('',(#407427),#407438,.F.); +#407427 = FACE_BOUND('',#407428,.F.); +#407428 = EDGE_LOOP('',(#407429,#407435,#407436,#407437)); +#407429 = ORIENTED_EDGE('',*,*,#407430,.T.); +#407430 = EDGE_CURVE('',#405105,#405788,#407431,.T.); +#407431 = LINE('',#407432,#407433); +#407432 = CARTESIAN_POINT('',(132.595,-119.755,0.)); +#407433 = VECTOR('',#407434,1.); +#407434 = DIRECTION('',(0.,0.,-1.)); +#407435 = ORIENTED_EDGE('',*,*,#405795,.T.); +#407436 = ORIENTED_EDGE('',*,*,#407396,.F.); +#407437 = ORIENTED_EDGE('',*,*,#405112,.F.); +#407438 = PLANE('',#407439); +#407439 = AXIS2_PLACEMENT_3D('',#407440,#407441,#407442); +#407440 = CARTESIAN_POINT('',(132.595,-119.755,0.)); +#407441 = DIRECTION('',(0.160449291415,0.98704408457,0.)); +#407442 = DIRECTION('',(-0.98704408457,0.160449291415,0.)); +#407443 = ADVANCED_FACE('',(#407444),#407455,.F.); +#407444 = FACE_BOUND('',#407445,.F.); +#407445 = EDGE_LOOP('',(#407446,#407447,#407448,#407454)); +#407446 = ORIENTED_EDGE('',*,*,#407415,.T.); +#407447 = ORIENTED_EDGE('',*,*,#405763,.T.); +#407448 = ORIENTED_EDGE('',*,*,#407449,.F.); +#407449 = EDGE_CURVE('',#405081,#405764,#407450,.T.); +#407450 = LINE('',#407451,#407452); +#407451 = CARTESIAN_POINT('',(133.40881,-119.754,0.)); +#407452 = VECTOR('',#407453,1.); +#407453 = DIRECTION('',(0.,0.,-1.)); +#407454 = ORIENTED_EDGE('',*,*,#405080,.F.); +#407455 = PLANE('',#407456); +#407456 = AXIS2_PLACEMENT_3D('',#407457,#407458,#407459); +#407457 = CARTESIAN_POINT('',(133.41,-119.754,0.)); +#407458 = DIRECTION('',(0.,1.,0.)); +#407459 = DIRECTION('',(-1.,0.,0.)); +#407460 = ADVANCED_FACE('',(#407461),#407472,.F.); +#407461 = FACE_BOUND('',#407462,.F.); +#407462 = EDGE_LOOP('',(#407463,#407469,#407470,#407471)); +#407463 = ORIENTED_EDGE('',*,*,#407464,.T.); +#407464 = EDGE_CURVE('',#405097,#405780,#407465,.T.); +#407465 = LINE('',#407466,#407467); +#407466 = CARTESIAN_POINT('',(133.405,-119.755,0.)); +#407467 = VECTOR('',#407468,1.); +#407468 = DIRECTION('',(0.,0.,-1.)); +#407469 = ORIENTED_EDGE('',*,*,#405787,.T.); +#407470 = ORIENTED_EDGE('',*,*,#407430,.F.); +#407471 = ORIENTED_EDGE('',*,*,#405104,.F.); +#407472 = PLANE('',#407473); +#407473 = AXIS2_PLACEMENT_3D('',#407474,#407475,#407476); +#407474 = CARTESIAN_POINT('',(133.405,-119.755,0.)); +#407475 = DIRECTION('',(0.,1.,0.)); +#407476 = DIRECTION('',(-1.,0.,0.)); +#407477 = ADVANCED_FACE('',(#407478),#407489,.F.); +#407478 = FACE_BOUND('',#407479,.F.); +#407479 = EDGE_LOOP('',(#407480,#407481,#407482,#407488)); +#407480 = ORIENTED_EDGE('',*,*,#407449,.T.); +#407481 = ORIENTED_EDGE('',*,*,#405771,.T.); +#407482 = ORIENTED_EDGE('',*,*,#407483,.F.); +#407483 = EDGE_CURVE('',#405089,#405772,#407484,.T.); +#407484 = LINE('',#407485,#407486); +#407485 = CARTESIAN_POINT('',(133.406581,-119.754743,0.)); +#407486 = VECTOR('',#407487,1.); +#407487 = DIRECTION('',(0.,0.,-1.)); +#407488 = ORIENTED_EDGE('',*,*,#405088,.F.); +#407489 = PLANE('',#407490); +#407490 = AXIS2_PLACEMENT_3D('',#407491,#407492,#407493); +#407491 = CARTESIAN_POINT('',(133.40881,-119.754,0.)); +#407492 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#407493 = DIRECTION('',(-0.948683298051,-0.316227766017,0.)); +#407494 = ADVANCED_FACE('',(#407495),#407501,.F.); +#407495 = FACE_BOUND('',#407496,.F.); +#407496 = EDGE_LOOP('',(#407497,#407498,#407499,#407500)); +#407497 = ORIENTED_EDGE('',*,*,#407483,.T.); +#407498 = ORIENTED_EDGE('',*,*,#405779,.T.); +#407499 = ORIENTED_EDGE('',*,*,#407464,.F.); +#407500 = ORIENTED_EDGE('',*,*,#405096,.F.); +#407501 = PLANE('',#407502); +#407502 = AXIS2_PLACEMENT_3D('',#407503,#407504,#407505); +#407503 = CARTESIAN_POINT('',(133.406581,-119.754743,0.)); +#407504 = DIRECTION('',(-0.160449291415,0.98704408457,0.)); +#407505 = DIRECTION('',(-0.98704408457,-0.160449291415,0.)); +#407506 = ADVANCED_FACE('',(#407507),#407518,.F.); +#407507 = FACE_BOUND('',#407508,.T.); +#407508 = EDGE_LOOP('',(#407509,#407510,#407516,#407517)); +#407509 = ORIENTED_EDGE('',*,*,#406110,.T.); +#407510 = ORIENTED_EDGE('',*,*,#407511,.T.); +#407511 = EDGE_CURVE('',#406111,#405428,#407512,.T.); +#407512 = LINE('',#407513,#407514); +#407513 = CARTESIAN_POINT('',(133.,-119.575,-4.6E-02)); +#407514 = VECTOR('',#407515,1.); +#407515 = DIRECTION('',(0.,0.,1.)); +#407516 = ORIENTED_EDGE('',*,*,#405427,.F.); +#407517 = ORIENTED_EDGE('',*,*,#407511,.F.); +#407518 = CYLINDRICAL_SURFACE('',#407519,7.499999999999E-02); +#407519 = AXIS2_PLACEMENT_3D('',#407520,#407521,#407522); +#407520 = CARTESIAN_POINT('',(133.,-119.5,-4.6E-02)); +#407521 = DIRECTION('',(-0.,-0.,-1.)); +#407522 = DIRECTION('',(-0.,-1.,0.)); +#407523 = ADVANCED_FACE('',(#407524),#407535,.F.); +#407524 = FACE_BOUND('',#407525,.T.); +#407525 = EDGE_LOOP('',(#407526,#407527,#407533,#407534)); +#407526 = ORIENTED_EDGE('',*,*,#406121,.T.); +#407527 = ORIENTED_EDGE('',*,*,#407528,.T.); +#407528 = EDGE_CURVE('',#406122,#405439,#407529,.T.); +#407529 = LINE('',#407530,#407531); +#407530 = CARTESIAN_POINT('',(133.,-118.575,-4.6E-02)); +#407531 = VECTOR('',#407532,1.); +#407532 = DIRECTION('',(0.,0.,1.)); +#407533 = ORIENTED_EDGE('',*,*,#405438,.F.); +#407534 = ORIENTED_EDGE('',*,*,#407528,.F.); +#407535 = CYLINDRICAL_SURFACE('',#407536,7.499999999999E-02); +#407536 = AXIS2_PLACEMENT_3D('',#407537,#407538,#407539); +#407537 = CARTESIAN_POINT('',(133.,-118.5,-4.6E-02)); +#407538 = DIRECTION('',(-0.,-0.,-1.)); +#407539 = DIRECTION('',(-0.,-1.,0.)); +#407540 = MANIFOLD_SOLID_BREP('',#407541); +#407541 = CLOSED_SHELL('',(#407542,#407575,#407595,#407615)); +#407542 = ADVANCED_FACE('',(#407543),#407570,.T.); +#407543 = FACE_BOUND('',#407544,.F.); +#407544 = EDGE_LOOP('',(#407545,#407555,#407562,#407563)); +#407545 = ORIENTED_EDGE('',*,*,#407546,.T.); +#407546 = EDGE_CURVE('',#407547,#407549,#407551,.T.); +#407547 = VERTEX_POINT('',#407548); +#407548 = CARTESIAN_POINT('',(133.149999,-118.5,1.51)); +#407549 = VERTEX_POINT('',#407550); +#407550 = CARTESIAN_POINT('',(133.149999,-118.5,1.55)); +#407551 = LINE('',#407552,#407553); +#407552 = CARTESIAN_POINT('',(133.149999,-118.5,1.51)); +#407553 = VECTOR('',#407554,1.); +#407554 = DIRECTION('',(0.,0.,1.)); +#407555 = ORIENTED_EDGE('',*,*,#407556,.T.); +#407556 = EDGE_CURVE('',#407549,#407549,#407557,.T.); +#407557 = CIRCLE('',#407558,0.149999); +#407558 = AXIS2_PLACEMENT_3D('',#407559,#407560,#407561); +#407559 = CARTESIAN_POINT('',(133.,-118.5,1.55)); +#407560 = DIRECTION('',(0.,0.,1.)); +#407561 = DIRECTION('',(1.,0.,-0.)); +#407562 = ORIENTED_EDGE('',*,*,#407546,.F.); +#407563 = ORIENTED_EDGE('',*,*,#407564,.F.); +#407564 = EDGE_CURVE('',#407547,#407547,#407565,.T.); +#407565 = CIRCLE('',#407566,0.149999); +#407566 = AXIS2_PLACEMENT_3D('',#407567,#407568,#407569); +#407567 = CARTESIAN_POINT('',(133.,-118.5,1.51)); +#407568 = DIRECTION('',(0.,0.,1.)); +#407569 = DIRECTION('',(1.,0.,-0.)); +#407570 = CYLINDRICAL_SURFACE('',#407571,0.149999); +#407571 = AXIS2_PLACEMENT_3D('',#407572,#407573,#407574); +#407572 = CARTESIAN_POINT('',(133.,-118.5,1.51)); +#407573 = DIRECTION('',(-0.,-0.,-1.)); +#407574 = DIRECTION('',(1.,0.,-0.)); +#407575 = ADVANCED_FACE('',(#407576,#407579),#407590,.F.); +#407576 = FACE_BOUND('',#407577,.F.); +#407577 = EDGE_LOOP('',(#407578)); +#407578 = ORIENTED_EDGE('',*,*,#407564,.T.); +#407579 = FACE_BOUND('',#407580,.F.); +#407580 = EDGE_LOOP('',(#407581)); +#407581 = ORIENTED_EDGE('',*,*,#407582,.T.); +#407582 = EDGE_CURVE('',#407583,#407583,#407585,.T.); +#407583 = VERTEX_POINT('',#407584); +#407584 = CARTESIAN_POINT('',(133.,-118.575,1.51)); +#407585 = CIRCLE('',#407586,7.499999999999E-02); +#407586 = AXIS2_PLACEMENT_3D('',#407587,#407588,#407589); +#407587 = CARTESIAN_POINT('',(133.,-118.5,1.51)); +#407588 = DIRECTION('',(-0.,0.,-1.)); +#407589 = DIRECTION('',(-0.,-1.,0.)); +#407590 = PLANE('',#407591); +#407591 = AXIS2_PLACEMENT_3D('',#407592,#407593,#407594); +#407592 = CARTESIAN_POINT('',(0.,0.,1.51)); +#407593 = DIRECTION('',(0.,0.,1.)); +#407594 = DIRECTION('',(1.,0.,-0.)); +#407595 = ADVANCED_FACE('',(#407596,#407599),#407610,.T.); +#407596 = FACE_BOUND('',#407597,.T.); +#407597 = EDGE_LOOP('',(#407598)); +#407598 = ORIENTED_EDGE('',*,*,#407556,.T.); +#407599 = FACE_BOUND('',#407600,.T.); +#407600 = EDGE_LOOP('',(#407601)); +#407601 = ORIENTED_EDGE('',*,*,#407602,.T.); +#407602 = EDGE_CURVE('',#407603,#407603,#407605,.T.); +#407603 = VERTEX_POINT('',#407604); +#407604 = CARTESIAN_POINT('',(133.,-118.575,1.55)); +#407605 = CIRCLE('',#407606,7.499999999999E-02); +#407606 = AXIS2_PLACEMENT_3D('',#407607,#407608,#407609); +#407607 = CARTESIAN_POINT('',(133.,-118.5,1.55)); +#407608 = DIRECTION('',(-0.,0.,-1.)); +#407609 = DIRECTION('',(-0.,-1.,0.)); +#407610 = PLANE('',#407611); +#407611 = AXIS2_PLACEMENT_3D('',#407612,#407613,#407614); +#407612 = CARTESIAN_POINT('',(0.,0.,1.55)); +#407613 = DIRECTION('',(0.,0.,1.)); +#407614 = DIRECTION('',(1.,0.,-0.)); +#407615 = ADVANCED_FACE('',(#407616),#407627,.F.); +#407616 = FACE_BOUND('',#407617,.T.); +#407617 = EDGE_LOOP('',(#407618,#407619,#407625,#407626)); +#407618 = ORIENTED_EDGE('',*,*,#407582,.T.); +#407619 = ORIENTED_EDGE('',*,*,#407620,.T.); +#407620 = EDGE_CURVE('',#407583,#407603,#407621,.T.); +#407621 = LINE('',#407622,#407623); +#407622 = CARTESIAN_POINT('',(133.,-118.575,-4.6E-02)); +#407623 = VECTOR('',#407624,1.); +#407624 = DIRECTION('',(0.,0.,1.)); +#407625 = ORIENTED_EDGE('',*,*,#407602,.F.); +#407626 = ORIENTED_EDGE('',*,*,#407620,.F.); +#407627 = CYLINDRICAL_SURFACE('',#407628,7.499999999999E-02); +#407628 = AXIS2_PLACEMENT_3D('',#407629,#407630,#407631); +#407629 = CARTESIAN_POINT('',(133.,-118.5,-4.6E-02)); +#407630 = DIRECTION('',(-0.,-0.,-1.)); +#407631 = DIRECTION('',(-0.,-1.,0.)); +#407632 = MANIFOLD_SOLID_BREP('',#407633); +#407633 = CLOSED_SHELL('',(#407634,#407667,#407687,#407707)); +#407634 = ADVANCED_FACE('',(#407635),#407662,.T.); +#407635 = FACE_BOUND('',#407636,.T.); +#407636 = EDGE_LOOP('',(#407637,#407647,#407654,#407655)); +#407637 = ORIENTED_EDGE('',*,*,#407638,.T.); +#407638 = EDGE_CURVE('',#407639,#407641,#407643,.T.); +#407639 = VERTEX_POINT('',#407640); +#407640 = CARTESIAN_POINT('',(133.149999,-118.5,0.)); +#407641 = VERTEX_POINT('',#407642); +#407642 = CARTESIAN_POINT('',(133.149999,-118.5,-4.E-02)); +#407643 = LINE('',#407644,#407645); +#407644 = CARTESIAN_POINT('',(133.149999,-118.5,0.)); +#407645 = VECTOR('',#407646,1.); +#407646 = DIRECTION('',(0.,0.,-1.)); +#407647 = ORIENTED_EDGE('',*,*,#407648,.T.); +#407648 = EDGE_CURVE('',#407641,#407641,#407649,.T.); +#407649 = CIRCLE('',#407650,0.149999); +#407650 = AXIS2_PLACEMENT_3D('',#407651,#407652,#407653); +#407651 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#407652 = DIRECTION('',(0.,0.,1.)); +#407653 = DIRECTION('',(1.,0.,-0.)); +#407654 = ORIENTED_EDGE('',*,*,#407638,.F.); +#407655 = ORIENTED_EDGE('',*,*,#407656,.F.); +#407656 = EDGE_CURVE('',#407639,#407639,#407657,.T.); +#407657 = CIRCLE('',#407658,0.149999); +#407658 = AXIS2_PLACEMENT_3D('',#407659,#407660,#407661); +#407659 = CARTESIAN_POINT('',(133.,-118.5,0.)); +#407660 = DIRECTION('',(0.,0.,1.)); +#407661 = DIRECTION('',(1.,0.,-0.)); +#407662 = CYLINDRICAL_SURFACE('',#407663,0.149999); +#407663 = AXIS2_PLACEMENT_3D('',#407664,#407665,#407666); +#407664 = CARTESIAN_POINT('',(133.,-118.5,0.)); +#407665 = DIRECTION('',(0.,0.,1.)); +#407666 = DIRECTION('',(1.,0.,-0.)); +#407667 = ADVANCED_FACE('',(#407668,#407671),#407682,.F.); +#407668 = FACE_BOUND('',#407669,.F.); +#407669 = EDGE_LOOP('',(#407670)); +#407670 = ORIENTED_EDGE('',*,*,#407656,.F.); +#407671 = FACE_BOUND('',#407672,.F.); +#407672 = EDGE_LOOP('',(#407673)); +#407673 = ORIENTED_EDGE('',*,*,#407674,.F.); +#407674 = EDGE_CURVE('',#407675,#407675,#407677,.T.); +#407675 = VERTEX_POINT('',#407676); +#407676 = CARTESIAN_POINT('',(133.,-118.575,0.)); +#407677 = CIRCLE('',#407678,7.499999999999E-02); +#407678 = AXIS2_PLACEMENT_3D('',#407679,#407680,#407681); +#407679 = CARTESIAN_POINT('',(133.,-118.5,0.)); +#407680 = DIRECTION('',(-0.,0.,-1.)); +#407681 = DIRECTION('',(-0.,-1.,0.)); +#407682 = PLANE('',#407683); +#407683 = AXIS2_PLACEMENT_3D('',#407684,#407685,#407686); +#407684 = CARTESIAN_POINT('',(0.,0.,0.)); +#407685 = DIRECTION('',(-0.,-0.,-1.)); +#407686 = DIRECTION('',(-1.,0.,0.)); +#407687 = ADVANCED_FACE('',(#407688,#407691),#407702,.T.); +#407688 = FACE_BOUND('',#407689,.T.); +#407689 = EDGE_LOOP('',(#407690)); +#407690 = ORIENTED_EDGE('',*,*,#407648,.F.); +#407691 = FACE_BOUND('',#407692,.T.); +#407692 = EDGE_LOOP('',(#407693)); +#407693 = ORIENTED_EDGE('',*,*,#407694,.F.); +#407694 = EDGE_CURVE('',#407695,#407695,#407697,.T.); +#407695 = VERTEX_POINT('',#407696); +#407696 = CARTESIAN_POINT('',(133.,-118.575,-4.E-02)); +#407697 = CIRCLE('',#407698,7.499999999999E-02); +#407698 = AXIS2_PLACEMENT_3D('',#407699,#407700,#407701); +#407699 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#407700 = DIRECTION('',(-0.,0.,-1.)); +#407701 = DIRECTION('',(-0.,-1.,0.)); +#407702 = PLANE('',#407703); +#407703 = AXIS2_PLACEMENT_3D('',#407704,#407705,#407706); +#407704 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#407705 = DIRECTION('',(-0.,-0.,-1.)); +#407706 = DIRECTION('',(-1.,0.,0.)); +#407707 = ADVANCED_FACE('',(#407708),#407719,.F.); +#407708 = FACE_BOUND('',#407709,.T.); +#407709 = EDGE_LOOP('',(#407710,#407711,#407717,#407718)); +#407710 = ORIENTED_EDGE('',*,*,#407694,.T.); +#407711 = ORIENTED_EDGE('',*,*,#407712,.T.); +#407712 = EDGE_CURVE('',#407695,#407675,#407713,.T.); +#407713 = LINE('',#407714,#407715); +#407714 = CARTESIAN_POINT('',(133.,-118.575,-4.6E-02)); +#407715 = VECTOR('',#407716,1.); +#407716 = DIRECTION('',(0.,0.,1.)); +#407717 = ORIENTED_EDGE('',*,*,#407674,.F.); +#407718 = ORIENTED_EDGE('',*,*,#407712,.F.); +#407719 = CYLINDRICAL_SURFACE('',#407720,7.499999999999E-02); +#407720 = AXIS2_PLACEMENT_3D('',#407721,#407722,#407723); +#407721 = CARTESIAN_POINT('',(133.,-118.5,-4.6E-02)); +#407722 = DIRECTION('',(-0.,-0.,-1.)); +#407723 = DIRECTION('',(-0.,-1.,0.)); +#407724 = MANIFOLD_SOLID_BREP('',#407725); +#407725 = CLOSED_SHELL('',(#407726,#407759,#407779,#407799)); +#407726 = ADVANCED_FACE('',(#407727),#407754,.T.); +#407727 = FACE_BOUND('',#407728,.F.); +#407728 = EDGE_LOOP('',(#407729,#407739,#407746,#407747)); +#407729 = ORIENTED_EDGE('',*,*,#407730,.T.); +#407730 = EDGE_CURVE('',#407731,#407733,#407735,.T.); +#407731 = VERTEX_POINT('',#407732); +#407732 = CARTESIAN_POINT('',(133.,-118.6,-4.E-02)); +#407733 = VERTEX_POINT('',#407734); +#407734 = CARTESIAN_POINT('',(133.,-118.6,1.55)); +#407735 = LINE('',#407736,#407737); +#407736 = CARTESIAN_POINT('',(133.,-118.6,-4.E-02)); +#407737 = VECTOR('',#407738,1.); +#407738 = DIRECTION('',(0.,0.,1.)); +#407739 = ORIENTED_EDGE('',*,*,#407740,.T.); +#407740 = EDGE_CURVE('',#407733,#407733,#407741,.T.); +#407741 = CIRCLE('',#407742,1.E-01); +#407742 = AXIS2_PLACEMENT_3D('',#407743,#407744,#407745); +#407743 = CARTESIAN_POINT('',(133.,-118.5,1.55)); +#407744 = DIRECTION('',(0.,0.,1.)); +#407745 = DIRECTION('',(-0.,-1.,0.)); +#407746 = ORIENTED_EDGE('',*,*,#407730,.F.); +#407747 = ORIENTED_EDGE('',*,*,#407748,.F.); +#407748 = EDGE_CURVE('',#407731,#407731,#407749,.T.); +#407749 = CIRCLE('',#407750,1.E-01); +#407750 = AXIS2_PLACEMENT_3D('',#407751,#407752,#407753); +#407751 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#407752 = DIRECTION('',(0.,0.,1.)); +#407753 = DIRECTION('',(-0.,-1.,0.)); +#407754 = CYLINDRICAL_SURFACE('',#407755,1.E-01); +#407755 = AXIS2_PLACEMENT_3D('',#407756,#407757,#407758); +#407756 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#407757 = DIRECTION('',(-0.,-0.,-1.)); +#407758 = DIRECTION('',(-0.,-1.,0.)); +#407759 = ADVANCED_FACE('',(#407760,#407763),#407774,.F.); +#407760 = FACE_BOUND('',#407761,.F.); +#407761 = EDGE_LOOP('',(#407762)); +#407762 = ORIENTED_EDGE('',*,*,#407748,.T.); +#407763 = FACE_BOUND('',#407764,.F.); +#407764 = EDGE_LOOP('',(#407765)); +#407765 = ORIENTED_EDGE('',*,*,#407766,.T.); +#407766 = EDGE_CURVE('',#407767,#407767,#407769,.T.); +#407767 = VERTEX_POINT('',#407768); +#407768 = CARTESIAN_POINT('',(133.,-118.575,-4.E-02)); +#407769 = CIRCLE('',#407770,7.499999999999E-02); +#407770 = AXIS2_PLACEMENT_3D('',#407771,#407772,#407773); +#407771 = CARTESIAN_POINT('',(133.,-118.5,-4.E-02)); +#407772 = DIRECTION('',(-0.,0.,-1.)); +#407773 = DIRECTION('',(-0.,-1.,0.)); +#407774 = PLANE('',#407775); +#407775 = AXIS2_PLACEMENT_3D('',#407776,#407777,#407778); +#407776 = CARTESIAN_POINT('',(133.,-118.6,-4.E-02)); +#407777 = DIRECTION('',(0.,0.,1.)); +#407778 = DIRECTION('',(1.,0.,-0.)); +#407779 = ADVANCED_FACE('',(#407780,#407783),#407794,.T.); +#407780 = FACE_BOUND('',#407781,.T.); +#407781 = EDGE_LOOP('',(#407782)); +#407782 = ORIENTED_EDGE('',*,*,#407740,.T.); +#407783 = FACE_BOUND('',#407784,.T.); +#407784 = EDGE_LOOP('',(#407785)); +#407785 = ORIENTED_EDGE('',*,*,#407786,.T.); +#407786 = EDGE_CURVE('',#407787,#407787,#407789,.T.); +#407787 = VERTEX_POINT('',#407788); +#407788 = CARTESIAN_POINT('',(133.,-118.575,1.55)); +#407789 = CIRCLE('',#407790,7.499999999999E-02); +#407790 = AXIS2_PLACEMENT_3D('',#407791,#407792,#407793); +#407791 = CARTESIAN_POINT('',(133.,-118.5,1.55)); +#407792 = DIRECTION('',(-0.,0.,-1.)); +#407793 = DIRECTION('',(-0.,-1.,0.)); +#407794 = PLANE('',#407795); +#407795 = AXIS2_PLACEMENT_3D('',#407796,#407797,#407798); +#407796 = CARTESIAN_POINT('',(133.,-118.6,1.55)); +#407797 = DIRECTION('',(0.,0.,1.)); +#407798 = DIRECTION('',(1.,0.,-0.)); +#407799 = ADVANCED_FACE('',(#407800),#407811,.F.); +#407800 = FACE_BOUND('',#407801,.T.); +#407801 = EDGE_LOOP('',(#407802,#407803,#407809,#407810)); +#407802 = ORIENTED_EDGE('',*,*,#407766,.T.); +#407803 = ORIENTED_EDGE('',*,*,#407804,.T.); +#407804 = EDGE_CURVE('',#407767,#407787,#407805,.T.); +#407805 = LINE('',#407806,#407807); +#407806 = CARTESIAN_POINT('',(133.,-118.575,-4.6E-02)); +#407807 = VECTOR('',#407808,1.); +#407808 = DIRECTION('',(0.,0.,1.)); +#407809 = ORIENTED_EDGE('',*,*,#407786,.F.); +#407810 = ORIENTED_EDGE('',*,*,#407804,.F.); +#407811 = CYLINDRICAL_SURFACE('',#407812,7.499999999999E-02); +#407812 = AXIS2_PLACEMENT_3D('',#407813,#407814,#407815); +#407813 = CARTESIAN_POINT('',(133.,-118.5,-4.6E-02)); +#407814 = DIRECTION('',(-0.,-0.,-1.)); +#407815 = DIRECTION('',(-0.,-1.,0.)); +#407816 = MANIFOLD_SOLID_BREP('',#407817); +#407817 = CLOSED_SHELL('',(#407818,#407851,#407871,#407891)); +#407818 = ADVANCED_FACE('',(#407819),#407846,.T.); +#407819 = FACE_BOUND('',#407820,.F.); +#407820 = EDGE_LOOP('',(#407821,#407831,#407838,#407839)); +#407821 = ORIENTED_EDGE('',*,*,#407822,.T.); +#407822 = EDGE_CURVE('',#407823,#407825,#407827,.T.); +#407823 = VERTEX_POINT('',#407824); +#407824 = CARTESIAN_POINT('',(133.149999,-119.5,1.51)); +#407825 = VERTEX_POINT('',#407826); +#407826 = CARTESIAN_POINT('',(133.149999,-119.5,1.55)); +#407827 = LINE('',#407828,#407829); +#407828 = CARTESIAN_POINT('',(133.149999,-119.5,1.51)); +#407829 = VECTOR('',#407830,1.); +#407830 = DIRECTION('',(0.,0.,1.)); +#407831 = ORIENTED_EDGE('',*,*,#407832,.T.); +#407832 = EDGE_CURVE('',#407825,#407825,#407833,.T.); +#407833 = CIRCLE('',#407834,0.149999); +#407834 = AXIS2_PLACEMENT_3D('',#407835,#407836,#407837); +#407835 = CARTESIAN_POINT('',(133.,-119.5,1.55)); +#407836 = DIRECTION('',(0.,0.,1.)); +#407837 = DIRECTION('',(1.,0.,-0.)); +#407838 = ORIENTED_EDGE('',*,*,#407822,.F.); +#407839 = ORIENTED_EDGE('',*,*,#407840,.F.); +#407840 = EDGE_CURVE('',#407823,#407823,#407841,.T.); +#407841 = CIRCLE('',#407842,0.149999); +#407842 = AXIS2_PLACEMENT_3D('',#407843,#407844,#407845); +#407843 = CARTESIAN_POINT('',(133.,-119.5,1.51)); +#407844 = DIRECTION('',(0.,0.,1.)); +#407845 = DIRECTION('',(1.,0.,-0.)); +#407846 = CYLINDRICAL_SURFACE('',#407847,0.149999); +#407847 = AXIS2_PLACEMENT_3D('',#407848,#407849,#407850); +#407848 = CARTESIAN_POINT('',(133.,-119.5,1.51)); +#407849 = DIRECTION('',(-0.,-0.,-1.)); +#407850 = DIRECTION('',(1.,0.,-0.)); +#407851 = ADVANCED_FACE('',(#407852,#407855),#407866,.F.); +#407852 = FACE_BOUND('',#407853,.F.); +#407853 = EDGE_LOOP('',(#407854)); +#407854 = ORIENTED_EDGE('',*,*,#407840,.T.); +#407855 = FACE_BOUND('',#407856,.F.); +#407856 = EDGE_LOOP('',(#407857)); +#407857 = ORIENTED_EDGE('',*,*,#407858,.T.); +#407858 = EDGE_CURVE('',#407859,#407859,#407861,.T.); +#407859 = VERTEX_POINT('',#407860); +#407860 = CARTESIAN_POINT('',(133.,-119.575,1.51)); +#407861 = CIRCLE('',#407862,7.499999999999E-02); +#407862 = AXIS2_PLACEMENT_3D('',#407863,#407864,#407865); +#407863 = CARTESIAN_POINT('',(133.,-119.5,1.51)); +#407864 = DIRECTION('',(-0.,0.,-1.)); +#407865 = DIRECTION('',(-0.,-1.,0.)); +#407866 = PLANE('',#407867); +#407867 = AXIS2_PLACEMENT_3D('',#407868,#407869,#407870); +#407868 = CARTESIAN_POINT('',(0.,0.,1.51)); +#407869 = DIRECTION('',(0.,0.,1.)); +#407870 = DIRECTION('',(1.,0.,-0.)); +#407871 = ADVANCED_FACE('',(#407872,#407875),#407886,.T.); +#407872 = FACE_BOUND('',#407873,.T.); +#407873 = EDGE_LOOP('',(#407874)); +#407874 = ORIENTED_EDGE('',*,*,#407832,.T.); +#407875 = FACE_BOUND('',#407876,.T.); +#407876 = EDGE_LOOP('',(#407877)); +#407877 = ORIENTED_EDGE('',*,*,#407878,.T.); +#407878 = EDGE_CURVE('',#407879,#407879,#407881,.T.); +#407879 = VERTEX_POINT('',#407880); +#407880 = CARTESIAN_POINT('',(133.,-119.575,1.55)); +#407881 = CIRCLE('',#407882,7.499999999999E-02); +#407882 = AXIS2_PLACEMENT_3D('',#407883,#407884,#407885); +#407883 = CARTESIAN_POINT('',(133.,-119.5,1.55)); +#407884 = DIRECTION('',(-0.,0.,-1.)); +#407885 = DIRECTION('',(-0.,-1.,0.)); +#407886 = PLANE('',#407887); +#407887 = AXIS2_PLACEMENT_3D('',#407888,#407889,#407890); +#407888 = CARTESIAN_POINT('',(0.,0.,1.55)); +#407889 = DIRECTION('',(0.,0.,1.)); +#407890 = DIRECTION('',(1.,0.,-0.)); +#407891 = ADVANCED_FACE('',(#407892),#407903,.F.); +#407892 = FACE_BOUND('',#407893,.T.); +#407893 = EDGE_LOOP('',(#407894,#407895,#407901,#407902)); +#407894 = ORIENTED_EDGE('',*,*,#407858,.T.); +#407895 = ORIENTED_EDGE('',*,*,#407896,.T.); +#407896 = EDGE_CURVE('',#407859,#407879,#407897,.T.); +#407897 = LINE('',#407898,#407899); +#407898 = CARTESIAN_POINT('',(133.,-119.575,-4.6E-02)); +#407899 = VECTOR('',#407900,1.); +#407900 = DIRECTION('',(0.,0.,1.)); +#407901 = ORIENTED_EDGE('',*,*,#407878,.F.); +#407902 = ORIENTED_EDGE('',*,*,#407896,.F.); +#407903 = CYLINDRICAL_SURFACE('',#407904,7.499999999999E-02); +#407904 = AXIS2_PLACEMENT_3D('',#407905,#407906,#407907); +#407905 = CARTESIAN_POINT('',(133.,-119.5,-4.6E-02)); +#407906 = DIRECTION('',(-0.,-0.,-1.)); +#407907 = DIRECTION('',(-0.,-1.,0.)); +#407908 = MANIFOLD_SOLID_BREP('',#407909); +#407909 = CLOSED_SHELL('',(#407910,#407943,#407963,#407983)); +#407910 = ADVANCED_FACE('',(#407911),#407938,.T.); +#407911 = FACE_BOUND('',#407912,.T.); +#407912 = EDGE_LOOP('',(#407913,#407923,#407930,#407931)); +#407913 = ORIENTED_EDGE('',*,*,#407914,.T.); +#407914 = EDGE_CURVE('',#407915,#407917,#407919,.T.); +#407915 = VERTEX_POINT('',#407916); +#407916 = CARTESIAN_POINT('',(133.149999,-119.5,0.)); +#407917 = VERTEX_POINT('',#407918); +#407918 = CARTESIAN_POINT('',(133.149999,-119.5,-4.E-02)); +#407919 = LINE('',#407920,#407921); +#407920 = CARTESIAN_POINT('',(133.149999,-119.5,0.)); +#407921 = VECTOR('',#407922,1.); +#407922 = DIRECTION('',(0.,0.,-1.)); +#407923 = ORIENTED_EDGE('',*,*,#407924,.T.); +#407924 = EDGE_CURVE('',#407917,#407917,#407925,.T.); +#407925 = CIRCLE('',#407926,0.149999); +#407926 = AXIS2_PLACEMENT_3D('',#407927,#407928,#407929); +#407927 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#407928 = DIRECTION('',(0.,0.,1.)); +#407929 = DIRECTION('',(1.,0.,-0.)); +#407930 = ORIENTED_EDGE('',*,*,#407914,.F.); +#407931 = ORIENTED_EDGE('',*,*,#407932,.F.); +#407932 = EDGE_CURVE('',#407915,#407915,#407933,.T.); +#407933 = CIRCLE('',#407934,0.149999); +#407934 = AXIS2_PLACEMENT_3D('',#407935,#407936,#407937); +#407935 = CARTESIAN_POINT('',(133.,-119.5,0.)); +#407936 = DIRECTION('',(0.,0.,1.)); +#407937 = DIRECTION('',(1.,0.,-0.)); +#407938 = CYLINDRICAL_SURFACE('',#407939,0.149999); +#407939 = AXIS2_PLACEMENT_3D('',#407940,#407941,#407942); +#407940 = CARTESIAN_POINT('',(133.,-119.5,0.)); +#407941 = DIRECTION('',(0.,0.,1.)); +#407942 = DIRECTION('',(1.,0.,-0.)); +#407943 = ADVANCED_FACE('',(#407944,#407947),#407958,.F.); +#407944 = FACE_BOUND('',#407945,.F.); +#407945 = EDGE_LOOP('',(#407946)); +#407946 = ORIENTED_EDGE('',*,*,#407932,.F.); +#407947 = FACE_BOUND('',#407948,.F.); +#407948 = EDGE_LOOP('',(#407949)); +#407949 = ORIENTED_EDGE('',*,*,#407950,.F.); +#407950 = EDGE_CURVE('',#407951,#407951,#407953,.T.); +#407951 = VERTEX_POINT('',#407952); +#407952 = CARTESIAN_POINT('',(133.,-119.575,0.)); +#407953 = CIRCLE('',#407954,7.499999999999E-02); +#407954 = AXIS2_PLACEMENT_3D('',#407955,#407956,#407957); +#407955 = CARTESIAN_POINT('',(133.,-119.5,0.)); +#407956 = DIRECTION('',(-0.,0.,-1.)); +#407957 = DIRECTION('',(-0.,-1.,0.)); +#407958 = PLANE('',#407959); +#407959 = AXIS2_PLACEMENT_3D('',#407960,#407961,#407962); +#407960 = CARTESIAN_POINT('',(0.,0.,0.)); +#407961 = DIRECTION('',(-0.,-0.,-1.)); +#407962 = DIRECTION('',(-1.,0.,0.)); +#407963 = ADVANCED_FACE('',(#407964,#407967),#407978,.T.); +#407964 = FACE_BOUND('',#407965,.T.); +#407965 = EDGE_LOOP('',(#407966)); +#407966 = ORIENTED_EDGE('',*,*,#407924,.F.); +#407967 = FACE_BOUND('',#407968,.T.); +#407968 = EDGE_LOOP('',(#407969)); +#407969 = ORIENTED_EDGE('',*,*,#407970,.F.); +#407970 = EDGE_CURVE('',#407971,#407971,#407973,.T.); +#407971 = VERTEX_POINT('',#407972); +#407972 = CARTESIAN_POINT('',(133.,-119.575,-4.E-02)); +#407973 = CIRCLE('',#407974,7.499999999999E-02); +#407974 = AXIS2_PLACEMENT_3D('',#407975,#407976,#407977); +#407975 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#407976 = DIRECTION('',(-0.,0.,-1.)); +#407977 = DIRECTION('',(-0.,-1.,0.)); +#407978 = PLANE('',#407979); +#407979 = AXIS2_PLACEMENT_3D('',#407980,#407981,#407982); +#407980 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#407981 = DIRECTION('',(-0.,-0.,-1.)); +#407982 = DIRECTION('',(-1.,0.,0.)); +#407983 = ADVANCED_FACE('',(#407984),#407995,.F.); +#407984 = FACE_BOUND('',#407985,.T.); +#407985 = EDGE_LOOP('',(#407986,#407987,#407993,#407994)); +#407986 = ORIENTED_EDGE('',*,*,#407970,.T.); +#407987 = ORIENTED_EDGE('',*,*,#407988,.T.); +#407988 = EDGE_CURVE('',#407971,#407951,#407989,.T.); +#407989 = LINE('',#407990,#407991); +#407990 = CARTESIAN_POINT('',(133.,-119.575,-4.6E-02)); +#407991 = VECTOR('',#407992,1.); +#407992 = DIRECTION('',(0.,0.,1.)); +#407993 = ORIENTED_EDGE('',*,*,#407950,.F.); +#407994 = ORIENTED_EDGE('',*,*,#407988,.F.); +#407995 = CYLINDRICAL_SURFACE('',#407996,7.499999999999E-02); +#407996 = AXIS2_PLACEMENT_3D('',#407997,#407998,#407999); +#407997 = CARTESIAN_POINT('',(133.,-119.5,-4.6E-02)); +#407998 = DIRECTION('',(-0.,-0.,-1.)); +#407999 = DIRECTION('',(-0.,-1.,0.)); +#408000 = MANIFOLD_SOLID_BREP('',#408001); +#408001 = CLOSED_SHELL('',(#408002,#408035,#408055,#408075)); +#408002 = ADVANCED_FACE('',(#408003),#408030,.T.); +#408003 = FACE_BOUND('',#408004,.F.); +#408004 = EDGE_LOOP('',(#408005,#408015,#408022,#408023)); +#408005 = ORIENTED_EDGE('',*,*,#408006,.T.); +#408006 = EDGE_CURVE('',#408007,#408009,#408011,.T.); +#408007 = VERTEX_POINT('',#408008); +#408008 = CARTESIAN_POINT('',(133.,-119.6,-4.E-02)); +#408009 = VERTEX_POINT('',#408010); +#408010 = CARTESIAN_POINT('',(133.,-119.6,1.55)); +#408011 = LINE('',#408012,#408013); +#408012 = CARTESIAN_POINT('',(133.,-119.6,-4.E-02)); +#408013 = VECTOR('',#408014,1.); +#408014 = DIRECTION('',(0.,0.,1.)); +#408015 = ORIENTED_EDGE('',*,*,#408016,.T.); +#408016 = EDGE_CURVE('',#408009,#408009,#408017,.T.); +#408017 = CIRCLE('',#408018,1.E-01); +#408018 = AXIS2_PLACEMENT_3D('',#408019,#408020,#408021); +#408019 = CARTESIAN_POINT('',(133.,-119.5,1.55)); +#408020 = DIRECTION('',(0.,0.,1.)); +#408021 = DIRECTION('',(-0.,-1.,0.)); +#408022 = ORIENTED_EDGE('',*,*,#408006,.F.); +#408023 = ORIENTED_EDGE('',*,*,#408024,.F.); +#408024 = EDGE_CURVE('',#408007,#408007,#408025,.T.); +#408025 = CIRCLE('',#408026,1.E-01); +#408026 = AXIS2_PLACEMENT_3D('',#408027,#408028,#408029); +#408027 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#408028 = DIRECTION('',(0.,0.,1.)); +#408029 = DIRECTION('',(-0.,-1.,0.)); +#408030 = CYLINDRICAL_SURFACE('',#408031,1.E-01); +#408031 = AXIS2_PLACEMENT_3D('',#408032,#408033,#408034); +#408032 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#408033 = DIRECTION('',(-0.,-0.,-1.)); +#408034 = DIRECTION('',(-0.,-1.,0.)); +#408035 = ADVANCED_FACE('',(#408036,#408039),#408050,.F.); +#408036 = FACE_BOUND('',#408037,.F.); +#408037 = EDGE_LOOP('',(#408038)); +#408038 = ORIENTED_EDGE('',*,*,#408024,.T.); +#408039 = FACE_BOUND('',#408040,.F.); +#408040 = EDGE_LOOP('',(#408041)); +#408041 = ORIENTED_EDGE('',*,*,#408042,.T.); +#408042 = EDGE_CURVE('',#408043,#408043,#408045,.T.); +#408043 = VERTEX_POINT('',#408044); +#408044 = CARTESIAN_POINT('',(133.,-119.575,-4.E-02)); +#408045 = CIRCLE('',#408046,7.499999999999E-02); +#408046 = AXIS2_PLACEMENT_3D('',#408047,#408048,#408049); +#408047 = CARTESIAN_POINT('',(133.,-119.5,-4.E-02)); +#408048 = DIRECTION('',(-0.,0.,-1.)); +#408049 = DIRECTION('',(-0.,-1.,0.)); +#408050 = PLANE('',#408051); +#408051 = AXIS2_PLACEMENT_3D('',#408052,#408053,#408054); +#408052 = CARTESIAN_POINT('',(133.,-119.6,-4.E-02)); +#408053 = DIRECTION('',(0.,0.,1.)); +#408054 = DIRECTION('',(1.,0.,-0.)); +#408055 = ADVANCED_FACE('',(#408056,#408059),#408070,.T.); +#408056 = FACE_BOUND('',#408057,.T.); +#408057 = EDGE_LOOP('',(#408058)); +#408058 = ORIENTED_EDGE('',*,*,#408016,.T.); +#408059 = FACE_BOUND('',#408060,.T.); +#408060 = EDGE_LOOP('',(#408061)); +#408061 = ORIENTED_EDGE('',*,*,#408062,.T.); +#408062 = EDGE_CURVE('',#408063,#408063,#408065,.T.); +#408063 = VERTEX_POINT('',#408064); +#408064 = CARTESIAN_POINT('',(133.,-119.575,1.55)); +#408065 = CIRCLE('',#408066,7.499999999999E-02); +#408066 = AXIS2_PLACEMENT_3D('',#408067,#408068,#408069); +#408067 = CARTESIAN_POINT('',(133.,-119.5,1.55)); +#408068 = DIRECTION('',(-0.,0.,-1.)); +#408069 = DIRECTION('',(-0.,-1.,0.)); +#408070 = PLANE('',#408071); +#408071 = AXIS2_PLACEMENT_3D('',#408072,#408073,#408074); +#408072 = CARTESIAN_POINT('',(133.,-119.6,1.55)); +#408073 = DIRECTION('',(0.,0.,1.)); +#408074 = DIRECTION('',(1.,0.,-0.)); +#408075 = ADVANCED_FACE('',(#408076),#408087,.F.); +#408076 = FACE_BOUND('',#408077,.T.); +#408077 = EDGE_LOOP('',(#408078,#408079,#408085,#408086)); +#408078 = ORIENTED_EDGE('',*,*,#408042,.T.); +#408079 = ORIENTED_EDGE('',*,*,#408080,.T.); +#408080 = EDGE_CURVE('',#408043,#408063,#408081,.T.); +#408081 = LINE('',#408082,#408083); +#408082 = CARTESIAN_POINT('',(133.,-119.575,-4.6E-02)); +#408083 = VECTOR('',#408084,1.); +#408084 = DIRECTION('',(0.,0.,1.)); +#408085 = ORIENTED_EDGE('',*,*,#408062,.F.); +#408086 = ORIENTED_EDGE('',*,*,#408080,.F.); +#408087 = CYLINDRICAL_SURFACE('',#408088,7.499999999999E-02); +#408088 = AXIS2_PLACEMENT_3D('',#408089,#408090,#408091); +#408089 = CARTESIAN_POINT('',(133.,-119.5,-4.6E-02)); +#408090 = DIRECTION('',(-0.,-0.,-1.)); +#408091 = DIRECTION('',(-0.,-1.,0.)); +#408092 = MANIFOLD_SOLID_BREP('',#408093); +#408093 = CLOSED_SHELL('',(#408094,#408136,#408167,#408200,#408231, + #408264,#408295,#408328,#408350,#408366)); +#408094 = ADVANCED_FACE('',(#408095),#408131,.T.); +#408095 = FACE_BOUND('',#408096,.F.); +#408096 = EDGE_LOOP('',(#408097,#408107,#408116,#408124)); +#408097 = ORIENTED_EDGE('',*,*,#408098,.T.); +#408098 = EDGE_CURVE('',#408099,#408101,#408103,.T.); +#408099 = VERTEX_POINT('',#408100); +#408100 = CARTESIAN_POINT('',(145.68,-123.375,0.)); +#408101 = VERTEX_POINT('',#408102); +#408102 = CARTESIAN_POINT('',(145.68,-123.375,-4.E-02)); +#408103 = LINE('',#408104,#408105); +#408104 = CARTESIAN_POINT('',(145.68,-123.375,0.)); +#408105 = VECTOR('',#408106,1.); +#408106 = DIRECTION('',(0.,0.,-1.)); +#408107 = ORIENTED_EDGE('',*,*,#408108,.T.); +#408108 = EDGE_CURVE('',#408101,#408109,#408111,.T.); +#408109 = VERTEX_POINT('',#408110); +#408110 = CARTESIAN_POINT('',(145.815,-123.24,-4.E-02)); +#408111 = CIRCLE('',#408112,0.135001418495); +#408112 = AXIS2_PLACEMENT_3D('',#408113,#408114,#408115); +#408113 = CARTESIAN_POINT('',(145.81500141848,-123.3750014184,-4.E-02)); +#408114 = DIRECTION('',(0.,0.,-1.)); +#408115 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#408116 = ORIENTED_EDGE('',*,*,#408117,.F.); +#408117 = EDGE_CURVE('',#408118,#408109,#408120,.T.); +#408118 = VERTEX_POINT('',#408119); +#408119 = CARTESIAN_POINT('',(145.815,-123.24,0.)); +#408120 = LINE('',#408121,#408122); +#408121 = CARTESIAN_POINT('',(145.815,-123.24,0.)); +#408122 = VECTOR('',#408123,1.); +#408123 = DIRECTION('',(0.,0.,-1.)); +#408124 = ORIENTED_EDGE('',*,*,#408125,.F.); +#408125 = EDGE_CURVE('',#408099,#408118,#408126,.T.); +#408126 = CIRCLE('',#408127,0.135001418495); +#408127 = AXIS2_PLACEMENT_3D('',#408128,#408129,#408130); +#408128 = CARTESIAN_POINT('',(145.81500141848,-123.3750014184,0.)); +#408129 = DIRECTION('',(0.,0.,-1.)); +#408130 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#408131 = CYLINDRICAL_SURFACE('',#408132,0.135001418495); +#408132 = AXIS2_PLACEMENT_3D('',#408133,#408134,#408135); +#408133 = CARTESIAN_POINT('',(145.81500141848,-123.3750014184,0.)); +#408134 = DIRECTION('',(-0.,-0.,1.)); +#408135 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#408136 = ADVANCED_FACE('',(#408137),#408162,.F.); +#408137 = FACE_BOUND('',#408138,.F.); +#408138 = EDGE_LOOP('',(#408139,#408140,#408148,#408156)); +#408139 = ORIENTED_EDGE('',*,*,#408117,.T.); +#408140 = ORIENTED_EDGE('',*,*,#408141,.T.); +#408141 = EDGE_CURVE('',#408109,#408142,#408144,.T.); +#408142 = VERTEX_POINT('',#408143); +#408143 = CARTESIAN_POINT('',(146.185,-123.24,-4.E-02)); +#408144 = LINE('',#408145,#408146); +#408145 = CARTESIAN_POINT('',(145.815,-123.24,-4.E-02)); +#408146 = VECTOR('',#408147,1.); +#408147 = DIRECTION('',(1.,0.,0.)); +#408148 = ORIENTED_EDGE('',*,*,#408149,.F.); +#408149 = EDGE_CURVE('',#408150,#408142,#408152,.T.); +#408150 = VERTEX_POINT('',#408151); +#408151 = CARTESIAN_POINT('',(146.185,-123.24,0.)); +#408152 = LINE('',#408153,#408154); +#408153 = CARTESIAN_POINT('',(146.185,-123.24,0.)); +#408154 = VECTOR('',#408155,1.); +#408155 = DIRECTION('',(0.,0.,-1.)); +#408156 = ORIENTED_EDGE('',*,*,#408157,.F.); +#408157 = EDGE_CURVE('',#408118,#408150,#408158,.T.); +#408158 = LINE('',#408159,#408160); +#408159 = CARTESIAN_POINT('',(145.815,-123.24,0.)); +#408160 = VECTOR('',#408161,1.); +#408161 = DIRECTION('',(1.,0.,0.)); +#408162 = PLANE('',#408163); +#408163 = AXIS2_PLACEMENT_3D('',#408164,#408165,#408166); +#408164 = CARTESIAN_POINT('',(145.815,-123.24,0.)); +#408165 = DIRECTION('',(0.,-1.,0.)); +#408166 = DIRECTION('',(1.,0.,0.)); +#408167 = ADVANCED_FACE('',(#408168),#408195,.T.); +#408168 = FACE_BOUND('',#408169,.F.); +#408169 = EDGE_LOOP('',(#408170,#408171,#408180,#408188)); +#408170 = ORIENTED_EDGE('',*,*,#408149,.T.); +#408171 = ORIENTED_EDGE('',*,*,#408172,.T.); +#408172 = EDGE_CURVE('',#408142,#408173,#408175,.T.); +#408173 = VERTEX_POINT('',#408174); +#408174 = CARTESIAN_POINT('',(146.32,-123.375,-4.E-02)); +#408175 = CIRCLE('',#408176,0.135001418495); +#408176 = AXIS2_PLACEMENT_3D('',#408177,#408178,#408179); +#408177 = CARTESIAN_POINT('',(146.18499858151,-123.3750014184,-4.E-02)); +#408178 = DIRECTION('',(0.,0.,-1.)); +#408179 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#408180 = ORIENTED_EDGE('',*,*,#408181,.F.); +#408181 = EDGE_CURVE('',#408182,#408173,#408184,.T.); +#408182 = VERTEX_POINT('',#408183); +#408183 = CARTESIAN_POINT('',(146.32,-123.375,0.)); +#408184 = LINE('',#408185,#408186); +#408185 = CARTESIAN_POINT('',(146.32,-123.375,0.)); +#408186 = VECTOR('',#408187,1.); +#408187 = DIRECTION('',(0.,0.,-1.)); +#408188 = ORIENTED_EDGE('',*,*,#408189,.F.); +#408189 = EDGE_CURVE('',#408150,#408182,#408190,.T.); +#408190 = CIRCLE('',#408191,0.135001418495); +#408191 = AXIS2_PLACEMENT_3D('',#408192,#408193,#408194); +#408192 = CARTESIAN_POINT('',(146.18499858151,-123.3750014184,0.)); +#408193 = DIRECTION('',(0.,0.,-1.)); +#408194 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#408195 = CYLINDRICAL_SURFACE('',#408196,0.135001418495); +#408196 = AXIS2_PLACEMENT_3D('',#408197,#408198,#408199); +#408197 = CARTESIAN_POINT('',(146.18499858151,-123.3750014184,0.)); +#408198 = DIRECTION('',(-0.,-0.,1.)); +#408199 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#408200 = ADVANCED_FACE('',(#408201),#408226,.F.); +#408201 = FACE_BOUND('',#408202,.F.); +#408202 = EDGE_LOOP('',(#408203,#408204,#408212,#408220)); +#408203 = ORIENTED_EDGE('',*,*,#408181,.T.); +#408204 = ORIENTED_EDGE('',*,*,#408205,.T.); +#408205 = EDGE_CURVE('',#408173,#408206,#408208,.T.); +#408206 = VERTEX_POINT('',#408207); +#408207 = CARTESIAN_POINT('',(146.32,-123.645,-4.E-02)); +#408208 = LINE('',#408209,#408210); +#408209 = CARTESIAN_POINT('',(146.32,-123.375,-4.E-02)); +#408210 = VECTOR('',#408211,1.); +#408211 = DIRECTION('',(0.,-1.,0.)); +#408212 = ORIENTED_EDGE('',*,*,#408213,.F.); +#408213 = EDGE_CURVE('',#408214,#408206,#408216,.T.); +#408214 = VERTEX_POINT('',#408215); +#408215 = CARTESIAN_POINT('',(146.32,-123.645,0.)); +#408216 = LINE('',#408217,#408218); +#408217 = CARTESIAN_POINT('',(146.32,-123.645,0.)); +#408218 = VECTOR('',#408219,1.); +#408219 = DIRECTION('',(0.,0.,-1.)); +#408220 = ORIENTED_EDGE('',*,*,#408221,.F.); +#408221 = EDGE_CURVE('',#408182,#408214,#408222,.T.); +#408222 = LINE('',#408223,#408224); +#408223 = CARTESIAN_POINT('',(146.32,-123.375,0.)); +#408224 = VECTOR('',#408225,1.); +#408225 = DIRECTION('',(0.,-1.,0.)); +#408226 = PLANE('',#408227); +#408227 = AXIS2_PLACEMENT_3D('',#408228,#408229,#408230); +#408228 = CARTESIAN_POINT('',(146.32,-123.375,0.)); +#408229 = DIRECTION('',(-1.,-0.,-0.)); +#408230 = DIRECTION('',(0.,-1.,0.)); +#408231 = ADVANCED_FACE('',(#408232),#408259,.T.); +#408232 = FACE_BOUND('',#408233,.F.); +#408233 = EDGE_LOOP('',(#408234,#408235,#408244,#408252)); +#408234 = ORIENTED_EDGE('',*,*,#408213,.T.); +#408235 = ORIENTED_EDGE('',*,*,#408236,.T.); +#408236 = EDGE_CURVE('',#408206,#408237,#408239,.T.); +#408237 = VERTEX_POINT('',#408238); +#408238 = CARTESIAN_POINT('',(146.185,-123.78,-4.E-02)); +#408239 = CIRCLE('',#408240,0.135001418495); +#408240 = AXIS2_PLACEMENT_3D('',#408241,#408242,#408243); +#408241 = CARTESIAN_POINT('',(146.18499858151,-123.6449985815,-4.E-02)); +#408242 = DIRECTION('',(0.,0.,-1.)); +#408243 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#408244 = ORIENTED_EDGE('',*,*,#408245,.F.); +#408245 = EDGE_CURVE('',#408246,#408237,#408248,.T.); +#408246 = VERTEX_POINT('',#408247); +#408247 = CARTESIAN_POINT('',(146.185,-123.78,0.)); +#408248 = LINE('',#408249,#408250); +#408249 = CARTESIAN_POINT('',(146.185,-123.78,0.)); +#408250 = VECTOR('',#408251,1.); +#408251 = DIRECTION('',(0.,0.,-1.)); +#408252 = ORIENTED_EDGE('',*,*,#408253,.F.); +#408253 = EDGE_CURVE('',#408214,#408246,#408254,.T.); +#408254 = CIRCLE('',#408255,0.135001418495); +#408255 = AXIS2_PLACEMENT_3D('',#408256,#408257,#408258); +#408256 = CARTESIAN_POINT('',(146.18499858151,-123.6449985815,0.)); +#408257 = DIRECTION('',(0.,0.,-1.)); +#408258 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#408259 = CYLINDRICAL_SURFACE('',#408260,0.135001418495); +#408260 = AXIS2_PLACEMENT_3D('',#408261,#408262,#408263); +#408261 = CARTESIAN_POINT('',(146.18499858151,-123.6449985815,0.)); +#408262 = DIRECTION('',(-0.,-0.,1.)); +#408263 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#408264 = ADVANCED_FACE('',(#408265),#408290,.F.); +#408265 = FACE_BOUND('',#408266,.F.); +#408266 = EDGE_LOOP('',(#408267,#408268,#408276,#408284)); +#408267 = ORIENTED_EDGE('',*,*,#408245,.T.); +#408268 = ORIENTED_EDGE('',*,*,#408269,.T.); +#408269 = EDGE_CURVE('',#408237,#408270,#408272,.T.); +#408270 = VERTEX_POINT('',#408271); +#408271 = CARTESIAN_POINT('',(145.815,-123.78,-4.E-02)); +#408272 = LINE('',#408273,#408274); +#408273 = CARTESIAN_POINT('',(146.185,-123.78,-4.E-02)); +#408274 = VECTOR('',#408275,1.); +#408275 = DIRECTION('',(-1.,0.,0.)); +#408276 = ORIENTED_EDGE('',*,*,#408277,.F.); +#408277 = EDGE_CURVE('',#408278,#408270,#408280,.T.); +#408278 = VERTEX_POINT('',#408279); +#408279 = CARTESIAN_POINT('',(145.815,-123.78,0.)); +#408280 = LINE('',#408281,#408282); +#408281 = CARTESIAN_POINT('',(145.815,-123.78,0.)); +#408282 = VECTOR('',#408283,1.); +#408283 = DIRECTION('',(0.,0.,-1.)); +#408284 = ORIENTED_EDGE('',*,*,#408285,.F.); +#408285 = EDGE_CURVE('',#408246,#408278,#408286,.T.); +#408286 = LINE('',#408287,#408288); +#408287 = CARTESIAN_POINT('',(146.185,-123.78,0.)); +#408288 = VECTOR('',#408289,1.); +#408289 = DIRECTION('',(-1.,0.,0.)); +#408290 = PLANE('',#408291); +#408291 = AXIS2_PLACEMENT_3D('',#408292,#408293,#408294); +#408292 = CARTESIAN_POINT('',(146.185,-123.78,0.)); +#408293 = DIRECTION('',(0.,1.,0.)); +#408294 = DIRECTION('',(-1.,0.,0.)); +#408295 = ADVANCED_FACE('',(#408296),#408323,.T.); +#408296 = FACE_BOUND('',#408297,.F.); +#408297 = EDGE_LOOP('',(#408298,#408299,#408308,#408316)); +#408298 = ORIENTED_EDGE('',*,*,#408277,.T.); +#408299 = ORIENTED_EDGE('',*,*,#408300,.T.); +#408300 = EDGE_CURVE('',#408270,#408301,#408303,.T.); +#408301 = VERTEX_POINT('',#408302); +#408302 = CARTESIAN_POINT('',(145.68,-123.645,-4.E-02)); +#408303 = CIRCLE('',#408304,0.135001418495); +#408304 = AXIS2_PLACEMENT_3D('',#408305,#408306,#408307); +#408305 = CARTESIAN_POINT('',(145.81500141848,-123.6449985815,-4.E-02)); +#408306 = DIRECTION('',(0.,0.,-1.)); +#408307 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408308 = ORIENTED_EDGE('',*,*,#408309,.F.); +#408309 = EDGE_CURVE('',#408310,#408301,#408312,.T.); +#408310 = VERTEX_POINT('',#408311); +#408311 = CARTESIAN_POINT('',(145.68,-123.645,0.)); +#408312 = LINE('',#408313,#408314); +#408313 = CARTESIAN_POINT('',(145.68,-123.645,0.)); +#408314 = VECTOR('',#408315,1.); +#408315 = DIRECTION('',(0.,0.,-1.)); +#408316 = ORIENTED_EDGE('',*,*,#408317,.F.); +#408317 = EDGE_CURVE('',#408278,#408310,#408318,.T.); +#408318 = CIRCLE('',#408319,0.135001418495); +#408319 = AXIS2_PLACEMENT_3D('',#408320,#408321,#408322); +#408320 = CARTESIAN_POINT('',(145.81500141848,-123.6449985815,0.)); +#408321 = DIRECTION('',(0.,0.,-1.)); +#408322 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408323 = CYLINDRICAL_SURFACE('',#408324,0.135001418495); +#408324 = AXIS2_PLACEMENT_3D('',#408325,#408326,#408327); +#408325 = CARTESIAN_POINT('',(145.81500141848,-123.6449985815,0.)); +#408326 = DIRECTION('',(-0.,-0.,1.)); +#408327 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408328 = ADVANCED_FACE('',(#408329),#408345,.F.); +#408329 = FACE_BOUND('',#408330,.F.); +#408330 = EDGE_LOOP('',(#408331,#408332,#408338,#408339)); +#408331 = ORIENTED_EDGE('',*,*,#408309,.T.); +#408332 = ORIENTED_EDGE('',*,*,#408333,.T.); +#408333 = EDGE_CURVE('',#408301,#408101,#408334,.T.); +#408334 = LINE('',#408335,#408336); +#408335 = CARTESIAN_POINT('',(145.68,-123.645,-4.E-02)); +#408336 = VECTOR('',#408337,1.); +#408337 = DIRECTION('',(0.,1.,0.)); +#408338 = ORIENTED_EDGE('',*,*,#408098,.F.); +#408339 = ORIENTED_EDGE('',*,*,#408340,.F.); +#408340 = EDGE_CURVE('',#408310,#408099,#408341,.T.); +#408341 = LINE('',#408342,#408343); +#408342 = CARTESIAN_POINT('',(145.68,-123.645,0.)); +#408343 = VECTOR('',#408344,1.); +#408344 = DIRECTION('',(0.,1.,0.)); +#408345 = PLANE('',#408346); +#408346 = AXIS2_PLACEMENT_3D('',#408347,#408348,#408349); +#408347 = CARTESIAN_POINT('',(145.68,-123.645,0.)); +#408348 = DIRECTION('',(1.,-0.,0.)); +#408349 = DIRECTION('',(0.,1.,0.)); +#408350 = ADVANCED_FACE('',(#408351),#408361,.F.); +#408351 = FACE_BOUND('',#408352,.F.); +#408352 = EDGE_LOOP('',(#408353,#408354,#408355,#408356,#408357,#408358, + #408359,#408360)); +#408353 = ORIENTED_EDGE('',*,*,#408125,.T.); +#408354 = ORIENTED_EDGE('',*,*,#408157,.T.); +#408355 = ORIENTED_EDGE('',*,*,#408189,.T.); +#408356 = ORIENTED_EDGE('',*,*,#408221,.T.); +#408357 = ORIENTED_EDGE('',*,*,#408253,.T.); +#408358 = ORIENTED_EDGE('',*,*,#408285,.T.); +#408359 = ORIENTED_EDGE('',*,*,#408317,.T.); +#408360 = ORIENTED_EDGE('',*,*,#408340,.T.); +#408361 = PLANE('',#408362); +#408362 = AXIS2_PLACEMENT_3D('',#408363,#408364,#408365); +#408363 = CARTESIAN_POINT('',(0.,0.,0.)); +#408364 = DIRECTION('',(-0.,-0.,-1.)); +#408365 = DIRECTION('',(-1.,0.,0.)); +#408366 = ADVANCED_FACE('',(#408367),#408377,.T.); +#408367 = FACE_BOUND('',#408368,.T.); +#408368 = EDGE_LOOP('',(#408369,#408370,#408371,#408372,#408373,#408374, + #408375,#408376)); +#408369 = ORIENTED_EDGE('',*,*,#408108,.T.); +#408370 = ORIENTED_EDGE('',*,*,#408141,.T.); +#408371 = ORIENTED_EDGE('',*,*,#408172,.T.); +#408372 = ORIENTED_EDGE('',*,*,#408205,.T.); +#408373 = ORIENTED_EDGE('',*,*,#408236,.T.); +#408374 = ORIENTED_EDGE('',*,*,#408269,.T.); +#408375 = ORIENTED_EDGE('',*,*,#408300,.T.); +#408376 = ORIENTED_EDGE('',*,*,#408333,.T.); +#408377 = PLANE('',#408378); +#408378 = AXIS2_PLACEMENT_3D('',#408379,#408380,#408381); +#408379 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#408380 = DIRECTION('',(-0.,-0.,-1.)); +#408381 = DIRECTION('',(-1.,0.,0.)); +#408382 = MANIFOLD_SOLID_BREP('',#408383); +#408383 = CLOSED_SHELL('',(#408384,#408426,#408457,#408490,#408521, + #408554,#408585,#408618,#408640,#408656)); +#408384 = ADVANCED_FACE('',(#408385),#408421,.T.); +#408385 = FACE_BOUND('',#408386,.F.); +#408386 = EDGE_LOOP('',(#408387,#408397,#408406,#408414)); +#408387 = ORIENTED_EDGE('',*,*,#408388,.T.); +#408388 = EDGE_CURVE('',#408389,#408391,#408393,.T.); +#408389 = VERTEX_POINT('',#408390); +#408390 = CARTESIAN_POINT('',(122.205,-115.625,0.)); +#408391 = VERTEX_POINT('',#408392); +#408392 = CARTESIAN_POINT('',(122.205,-115.625,-4.E-02)); +#408393 = LINE('',#408394,#408395); +#408394 = CARTESIAN_POINT('',(122.205,-115.625,0.)); +#408395 = VECTOR('',#408396,1.); +#408396 = DIRECTION('',(0.,0.,-1.)); +#408397 = ORIENTED_EDGE('',*,*,#408398,.T.); +#408398 = EDGE_CURVE('',#408391,#408399,#408401,.T.); +#408399 = VERTEX_POINT('',#408400); +#408400 = CARTESIAN_POINT('',(122.34,-115.49,-4.E-02)); +#408401 = CIRCLE('',#408402,0.135001418495); +#408402 = AXIS2_PLACEMENT_3D('',#408403,#408404,#408405); +#408403 = CARTESIAN_POINT('',(122.34000141848,-115.6250014184,-4.E-02)); +#408404 = DIRECTION('',(0.,0.,-1.)); +#408405 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#408406 = ORIENTED_EDGE('',*,*,#408407,.F.); +#408407 = EDGE_CURVE('',#408408,#408399,#408410,.T.); +#408408 = VERTEX_POINT('',#408409); +#408409 = CARTESIAN_POINT('',(122.34,-115.49,0.)); +#408410 = LINE('',#408411,#408412); +#408411 = CARTESIAN_POINT('',(122.34,-115.49,0.)); +#408412 = VECTOR('',#408413,1.); +#408413 = DIRECTION('',(0.,0.,-1.)); +#408414 = ORIENTED_EDGE('',*,*,#408415,.F.); +#408415 = EDGE_CURVE('',#408389,#408408,#408416,.T.); +#408416 = CIRCLE('',#408417,0.135001418495); +#408417 = AXIS2_PLACEMENT_3D('',#408418,#408419,#408420); +#408418 = CARTESIAN_POINT('',(122.34000141848,-115.6250014184,0.)); +#408419 = DIRECTION('',(0.,0.,-1.)); +#408420 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#408421 = CYLINDRICAL_SURFACE('',#408422,0.135001418495); +#408422 = AXIS2_PLACEMENT_3D('',#408423,#408424,#408425); +#408423 = CARTESIAN_POINT('',(122.34000141848,-115.6250014184,0.)); +#408424 = DIRECTION('',(-0.,-0.,1.)); +#408425 = DIRECTION('',(-0.999999999945,1.050720641103E-05,0.)); +#408426 = ADVANCED_FACE('',(#408427),#408452,.F.); +#408427 = FACE_BOUND('',#408428,.F.); +#408428 = EDGE_LOOP('',(#408429,#408430,#408438,#408446)); +#408429 = ORIENTED_EDGE('',*,*,#408407,.T.); +#408430 = ORIENTED_EDGE('',*,*,#408431,.T.); +#408431 = EDGE_CURVE('',#408399,#408432,#408434,.T.); +#408432 = VERTEX_POINT('',#408433); +#408433 = CARTESIAN_POINT('',(122.71,-115.49,-4.E-02)); +#408434 = LINE('',#408435,#408436); +#408435 = CARTESIAN_POINT('',(122.34,-115.49,-4.E-02)); +#408436 = VECTOR('',#408437,1.); +#408437 = DIRECTION('',(1.,0.,0.)); +#408438 = ORIENTED_EDGE('',*,*,#408439,.F.); +#408439 = EDGE_CURVE('',#408440,#408432,#408442,.T.); +#408440 = VERTEX_POINT('',#408441); +#408441 = CARTESIAN_POINT('',(122.71,-115.49,0.)); +#408442 = LINE('',#408443,#408444); +#408443 = CARTESIAN_POINT('',(122.71,-115.49,0.)); +#408444 = VECTOR('',#408445,1.); +#408445 = DIRECTION('',(0.,0.,-1.)); +#408446 = ORIENTED_EDGE('',*,*,#408447,.F.); +#408447 = EDGE_CURVE('',#408408,#408440,#408448,.T.); +#408448 = LINE('',#408449,#408450); +#408449 = CARTESIAN_POINT('',(122.34,-115.49,0.)); +#408450 = VECTOR('',#408451,1.); +#408451 = DIRECTION('',(1.,0.,0.)); +#408452 = PLANE('',#408453); +#408453 = AXIS2_PLACEMENT_3D('',#408454,#408455,#408456); +#408454 = CARTESIAN_POINT('',(122.34,-115.49,0.)); +#408455 = DIRECTION('',(0.,-1.,0.)); +#408456 = DIRECTION('',(1.,0.,0.)); +#408457 = ADVANCED_FACE('',(#408458),#408485,.T.); +#408458 = FACE_BOUND('',#408459,.F.); +#408459 = EDGE_LOOP('',(#408460,#408461,#408470,#408478)); +#408460 = ORIENTED_EDGE('',*,*,#408439,.T.); +#408461 = ORIENTED_EDGE('',*,*,#408462,.T.); +#408462 = EDGE_CURVE('',#408432,#408463,#408465,.T.); +#408463 = VERTEX_POINT('',#408464); +#408464 = CARTESIAN_POINT('',(122.845,-115.625,-4.E-02)); +#408465 = CIRCLE('',#408466,0.135001418495); +#408466 = AXIS2_PLACEMENT_3D('',#408467,#408468,#408469); +#408467 = CARTESIAN_POINT('',(122.70999858151,-115.6250014184,-4.E-02)); +#408468 = DIRECTION('',(0.,0.,-1.)); +#408469 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#408470 = ORIENTED_EDGE('',*,*,#408471,.F.); +#408471 = EDGE_CURVE('',#408472,#408463,#408474,.T.); +#408472 = VERTEX_POINT('',#408473); +#408473 = CARTESIAN_POINT('',(122.845,-115.625,0.)); +#408474 = LINE('',#408475,#408476); +#408475 = CARTESIAN_POINT('',(122.845,-115.625,0.)); +#408476 = VECTOR('',#408477,1.); +#408477 = DIRECTION('',(0.,0.,-1.)); +#408478 = ORIENTED_EDGE('',*,*,#408479,.F.); +#408479 = EDGE_CURVE('',#408440,#408472,#408480,.T.); +#408480 = CIRCLE('',#408481,0.135001418495); +#408481 = AXIS2_PLACEMENT_3D('',#408482,#408483,#408484); +#408482 = CARTESIAN_POINT('',(122.70999858151,-115.6250014184,0.)); +#408483 = DIRECTION('',(0.,0.,-1.)); +#408484 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#408485 = CYLINDRICAL_SURFACE('',#408486,0.135001418495); +#408486 = AXIS2_PLACEMENT_3D('',#408487,#408488,#408489); +#408487 = CARTESIAN_POINT('',(122.70999858151,-115.6250014184,0.)); +#408488 = DIRECTION('',(-0.,-0.,1.)); +#408489 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#408490 = ADVANCED_FACE('',(#408491),#408516,.F.); +#408491 = FACE_BOUND('',#408492,.F.); +#408492 = EDGE_LOOP('',(#408493,#408494,#408502,#408510)); +#408493 = ORIENTED_EDGE('',*,*,#408471,.T.); +#408494 = ORIENTED_EDGE('',*,*,#408495,.T.); +#408495 = EDGE_CURVE('',#408463,#408496,#408498,.T.); +#408496 = VERTEX_POINT('',#408497); +#408497 = CARTESIAN_POINT('',(122.845,-115.895,-4.E-02)); +#408498 = LINE('',#408499,#408500); +#408499 = CARTESIAN_POINT('',(122.845,-115.625,-4.E-02)); +#408500 = VECTOR('',#408501,1.); +#408501 = DIRECTION('',(0.,-1.,0.)); +#408502 = ORIENTED_EDGE('',*,*,#408503,.F.); +#408503 = EDGE_CURVE('',#408504,#408496,#408506,.T.); +#408504 = VERTEX_POINT('',#408505); +#408505 = CARTESIAN_POINT('',(122.845,-115.895,0.)); +#408506 = LINE('',#408507,#408508); +#408507 = CARTESIAN_POINT('',(122.845,-115.895,0.)); +#408508 = VECTOR('',#408509,1.); +#408509 = DIRECTION('',(0.,0.,-1.)); +#408510 = ORIENTED_EDGE('',*,*,#408511,.F.); +#408511 = EDGE_CURVE('',#408472,#408504,#408512,.T.); +#408512 = LINE('',#408513,#408514); +#408513 = CARTESIAN_POINT('',(122.845,-115.625,0.)); +#408514 = VECTOR('',#408515,1.); +#408515 = DIRECTION('',(0.,-1.,0.)); +#408516 = PLANE('',#408517); +#408517 = AXIS2_PLACEMENT_3D('',#408518,#408519,#408520); +#408518 = CARTESIAN_POINT('',(122.845,-115.625,0.)); +#408519 = DIRECTION('',(-1.,-0.,-0.)); +#408520 = DIRECTION('',(0.,-1.,0.)); +#408521 = ADVANCED_FACE('',(#408522),#408549,.T.); +#408522 = FACE_BOUND('',#408523,.F.); +#408523 = EDGE_LOOP('',(#408524,#408525,#408534,#408542)); +#408524 = ORIENTED_EDGE('',*,*,#408503,.T.); +#408525 = ORIENTED_EDGE('',*,*,#408526,.T.); +#408526 = EDGE_CURVE('',#408496,#408527,#408529,.T.); +#408527 = VERTEX_POINT('',#408528); +#408528 = CARTESIAN_POINT('',(122.71,-116.03,-4.E-02)); +#408529 = CIRCLE('',#408530,0.135001418495); +#408530 = AXIS2_PLACEMENT_3D('',#408531,#408532,#408533); +#408531 = CARTESIAN_POINT('',(122.70999858151,-115.8949985815,-4.E-02)); +#408532 = DIRECTION('',(0.,0.,-1.)); +#408533 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408534 = ORIENTED_EDGE('',*,*,#408535,.F.); +#408535 = EDGE_CURVE('',#408536,#408527,#408538,.T.); +#408536 = VERTEX_POINT('',#408537); +#408537 = CARTESIAN_POINT('',(122.71,-116.03,0.)); +#408538 = LINE('',#408539,#408540); +#408539 = CARTESIAN_POINT('',(122.71,-116.03,0.)); +#408540 = VECTOR('',#408541,1.); +#408541 = DIRECTION('',(0.,0.,-1.)); +#408542 = ORIENTED_EDGE('',*,*,#408543,.F.); +#408543 = EDGE_CURVE('',#408504,#408536,#408544,.T.); +#408544 = CIRCLE('',#408545,0.135001418495); +#408545 = AXIS2_PLACEMENT_3D('',#408546,#408547,#408548); +#408546 = CARTESIAN_POINT('',(122.70999858151,-115.8949985815,0.)); +#408547 = DIRECTION('',(0.,0.,-1.)); +#408548 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408549 = CYLINDRICAL_SURFACE('',#408550,0.135001418495); +#408550 = AXIS2_PLACEMENT_3D('',#408551,#408552,#408553); +#408551 = CARTESIAN_POINT('',(122.70999858151,-115.8949985815,0.)); +#408552 = DIRECTION('',(-0.,-0.,1.)); +#408553 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408554 = ADVANCED_FACE('',(#408555),#408580,.F.); +#408555 = FACE_BOUND('',#408556,.F.); +#408556 = EDGE_LOOP('',(#408557,#408558,#408566,#408574)); +#408557 = ORIENTED_EDGE('',*,*,#408535,.T.); +#408558 = ORIENTED_EDGE('',*,*,#408559,.T.); +#408559 = EDGE_CURVE('',#408527,#408560,#408562,.T.); +#408560 = VERTEX_POINT('',#408561); +#408561 = CARTESIAN_POINT('',(122.34,-116.03,-4.E-02)); +#408562 = LINE('',#408563,#408564); +#408563 = CARTESIAN_POINT('',(122.71,-116.03,-4.E-02)); +#408564 = VECTOR('',#408565,1.); +#408565 = DIRECTION('',(-1.,0.,0.)); +#408566 = ORIENTED_EDGE('',*,*,#408567,.F.); +#408567 = EDGE_CURVE('',#408568,#408560,#408570,.T.); +#408568 = VERTEX_POINT('',#408569); +#408569 = CARTESIAN_POINT('',(122.34,-116.03,0.)); +#408570 = LINE('',#408571,#408572); +#408571 = CARTESIAN_POINT('',(122.34,-116.03,0.)); +#408572 = VECTOR('',#408573,1.); +#408573 = DIRECTION('',(0.,0.,-1.)); +#408574 = ORIENTED_EDGE('',*,*,#408575,.F.); +#408575 = EDGE_CURVE('',#408536,#408568,#408576,.T.); +#408576 = LINE('',#408577,#408578); +#408577 = CARTESIAN_POINT('',(122.71,-116.03,0.)); +#408578 = VECTOR('',#408579,1.); +#408579 = DIRECTION('',(-1.,0.,0.)); +#408580 = PLANE('',#408581); +#408581 = AXIS2_PLACEMENT_3D('',#408582,#408583,#408584); +#408582 = CARTESIAN_POINT('',(122.71,-116.03,0.)); +#408583 = DIRECTION('',(0.,1.,0.)); +#408584 = DIRECTION('',(-1.,0.,0.)); +#408585 = ADVANCED_FACE('',(#408586),#408613,.T.); +#408586 = FACE_BOUND('',#408587,.F.); +#408587 = EDGE_LOOP('',(#408588,#408589,#408598,#408606)); +#408588 = ORIENTED_EDGE('',*,*,#408567,.T.); +#408589 = ORIENTED_EDGE('',*,*,#408590,.T.); +#408590 = EDGE_CURVE('',#408560,#408591,#408593,.T.); +#408591 = VERTEX_POINT('',#408592); +#408592 = CARTESIAN_POINT('',(122.205,-115.895,-4.E-02)); +#408593 = CIRCLE('',#408594,0.135001418495); +#408594 = AXIS2_PLACEMENT_3D('',#408595,#408596,#408597); +#408595 = CARTESIAN_POINT('',(122.34000141848,-115.8949985815,-4.E-02)); +#408596 = DIRECTION('',(0.,0.,-1.)); +#408597 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408598 = ORIENTED_EDGE('',*,*,#408599,.F.); +#408599 = EDGE_CURVE('',#408600,#408591,#408602,.T.); +#408600 = VERTEX_POINT('',#408601); +#408601 = CARTESIAN_POINT('',(122.205,-115.895,0.)); +#408602 = LINE('',#408603,#408604); +#408603 = CARTESIAN_POINT('',(122.205,-115.895,0.)); +#408604 = VECTOR('',#408605,1.); +#408605 = DIRECTION('',(0.,0.,-1.)); +#408606 = ORIENTED_EDGE('',*,*,#408607,.F.); +#408607 = EDGE_CURVE('',#408568,#408600,#408608,.T.); +#408608 = CIRCLE('',#408609,0.135001418495); +#408609 = AXIS2_PLACEMENT_3D('',#408610,#408611,#408612); +#408610 = CARTESIAN_POINT('',(122.34000141848,-115.8949985815,0.)); +#408611 = DIRECTION('',(0.,0.,-1.)); +#408612 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408613 = CYLINDRICAL_SURFACE('',#408614,0.135001418495); +#408614 = AXIS2_PLACEMENT_3D('',#408615,#408616,#408617); +#408615 = CARTESIAN_POINT('',(122.34000141848,-115.8949985815,0.)); +#408616 = DIRECTION('',(-0.,-0.,1.)); +#408617 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#408618 = ADVANCED_FACE('',(#408619),#408635,.F.); +#408619 = FACE_BOUND('',#408620,.F.); +#408620 = EDGE_LOOP('',(#408621,#408622,#408628,#408629)); +#408621 = ORIENTED_EDGE('',*,*,#408599,.T.); +#408622 = ORIENTED_EDGE('',*,*,#408623,.T.); +#408623 = EDGE_CURVE('',#408591,#408391,#408624,.T.); +#408624 = LINE('',#408625,#408626); +#408625 = CARTESIAN_POINT('',(122.205,-115.895,-4.E-02)); +#408626 = VECTOR('',#408627,1.); +#408627 = DIRECTION('',(0.,1.,0.)); +#408628 = ORIENTED_EDGE('',*,*,#408388,.F.); +#408629 = ORIENTED_EDGE('',*,*,#408630,.F.); +#408630 = EDGE_CURVE('',#408600,#408389,#408631,.T.); +#408631 = LINE('',#408632,#408633); +#408632 = CARTESIAN_POINT('',(122.205,-115.895,0.)); +#408633 = VECTOR('',#408634,1.); +#408634 = DIRECTION('',(0.,1.,0.)); +#408635 = PLANE('',#408636); +#408636 = AXIS2_PLACEMENT_3D('',#408637,#408638,#408639); +#408637 = CARTESIAN_POINT('',(122.205,-115.895,0.)); +#408638 = DIRECTION('',(1.,-0.,0.)); +#408639 = DIRECTION('',(0.,1.,0.)); +#408640 = ADVANCED_FACE('',(#408641),#408651,.F.); +#408641 = FACE_BOUND('',#408642,.F.); +#408642 = EDGE_LOOP('',(#408643,#408644,#408645,#408646,#408647,#408648, + #408649,#408650)); +#408643 = ORIENTED_EDGE('',*,*,#408415,.T.); +#408644 = ORIENTED_EDGE('',*,*,#408447,.T.); +#408645 = ORIENTED_EDGE('',*,*,#408479,.T.); +#408646 = ORIENTED_EDGE('',*,*,#408511,.T.); +#408647 = ORIENTED_EDGE('',*,*,#408543,.T.); +#408648 = ORIENTED_EDGE('',*,*,#408575,.T.); +#408649 = ORIENTED_EDGE('',*,*,#408607,.T.); +#408650 = ORIENTED_EDGE('',*,*,#408630,.T.); +#408651 = PLANE('',#408652); +#408652 = AXIS2_PLACEMENT_3D('',#408653,#408654,#408655); +#408653 = CARTESIAN_POINT('',(0.,0.,0.)); +#408654 = DIRECTION('',(-0.,-0.,-1.)); +#408655 = DIRECTION('',(-1.,0.,0.)); +#408656 = ADVANCED_FACE('',(#408657),#408667,.T.); +#408657 = FACE_BOUND('',#408658,.T.); +#408658 = EDGE_LOOP('',(#408659,#408660,#408661,#408662,#408663,#408664, + #408665,#408666)); +#408659 = ORIENTED_EDGE('',*,*,#408398,.T.); +#408660 = ORIENTED_EDGE('',*,*,#408431,.T.); +#408661 = ORIENTED_EDGE('',*,*,#408462,.T.); +#408662 = ORIENTED_EDGE('',*,*,#408495,.T.); +#408663 = ORIENTED_EDGE('',*,*,#408526,.T.); +#408664 = ORIENTED_EDGE('',*,*,#408559,.T.); +#408665 = ORIENTED_EDGE('',*,*,#408590,.T.); +#408666 = ORIENTED_EDGE('',*,*,#408623,.T.); +#408667 = PLANE('',#408668); +#408668 = AXIS2_PLACEMENT_3D('',#408669,#408670,#408671); +#408669 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#408670 = DIRECTION('',(-0.,-0.,-1.)); +#408671 = DIRECTION('',(-1.,0.,0.)); +#408672 = MANIFOLD_SOLID_BREP('',#408673); +#408673 = CLOSED_SHELL('',(#408674,#408716,#408747,#408780,#408811, + #408844,#408875,#408908,#408930,#408946)); +#408674 = ADVANCED_FACE('',(#408675),#408711,.T.); +#408675 = FACE_BOUND('',#408676,.F.); +#408676 = EDGE_LOOP('',(#408677,#408687,#408696,#408704)); +#408677 = ORIENTED_EDGE('',*,*,#408678,.T.); +#408678 = EDGE_CURVE('',#408679,#408681,#408683,.T.); +#408679 = VERTEX_POINT('',#408680); +#408680 = CARTESIAN_POINT('',(124.73,-122.315,0.)); +#408681 = VERTEX_POINT('',#408682); +#408682 = CARTESIAN_POINT('',(124.73,-122.315,-4.E-02)); +#408683 = LINE('',#408684,#408685); +#408684 = CARTESIAN_POINT('',(124.73,-122.315,0.)); +#408685 = VECTOR('',#408686,1.); +#408686 = DIRECTION('',(0.,0.,-1.)); +#408687 = ORIENTED_EDGE('',*,*,#408688,.T.); +#408688 = EDGE_CURVE('',#408681,#408689,#408691,.T.); +#408689 = VERTEX_POINT('',#408690); +#408690 = CARTESIAN_POINT('',(124.865,-122.18,-4.E-02)); +#408691 = CIRCLE('',#408692,0.135001418495); +#408692 = AXIS2_PLACEMENT_3D('',#408693,#408694,#408695); +#408693 = CARTESIAN_POINT('',(124.86500141848,-122.3150014184,-4.E-02)); +#408694 = DIRECTION('',(0.,0.,-1.)); +#408695 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#408696 = ORIENTED_EDGE('',*,*,#408697,.F.); +#408697 = EDGE_CURVE('',#408698,#408689,#408700,.T.); +#408698 = VERTEX_POINT('',#408699); +#408699 = CARTESIAN_POINT('',(124.865,-122.18,0.)); +#408700 = LINE('',#408701,#408702); +#408701 = CARTESIAN_POINT('',(124.865,-122.18,0.)); +#408702 = VECTOR('',#408703,1.); +#408703 = DIRECTION('',(0.,0.,-1.)); +#408704 = ORIENTED_EDGE('',*,*,#408705,.F.); +#408705 = EDGE_CURVE('',#408679,#408698,#408706,.T.); +#408706 = CIRCLE('',#408707,0.135001418495); +#408707 = AXIS2_PLACEMENT_3D('',#408708,#408709,#408710); +#408708 = CARTESIAN_POINT('',(124.86500141848,-122.3150014184,0.)); +#408709 = DIRECTION('',(0.,0.,-1.)); +#408710 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#408711 = CYLINDRICAL_SURFACE('',#408712,0.135001418495); +#408712 = AXIS2_PLACEMENT_3D('',#408713,#408714,#408715); +#408713 = CARTESIAN_POINT('',(124.86500141848,-122.3150014184,0.)); +#408714 = DIRECTION('',(-0.,-0.,1.)); +#408715 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#408716 = ADVANCED_FACE('',(#408717),#408742,.F.); +#408717 = FACE_BOUND('',#408718,.F.); +#408718 = EDGE_LOOP('',(#408719,#408720,#408728,#408736)); +#408719 = ORIENTED_EDGE('',*,*,#408697,.T.); +#408720 = ORIENTED_EDGE('',*,*,#408721,.T.); +#408721 = EDGE_CURVE('',#408689,#408722,#408724,.T.); +#408722 = VERTEX_POINT('',#408723); +#408723 = CARTESIAN_POINT('',(125.135,-122.18,-4.E-02)); +#408724 = LINE('',#408725,#408726); +#408725 = CARTESIAN_POINT('',(124.865,-122.18,-4.E-02)); +#408726 = VECTOR('',#408727,1.); +#408727 = DIRECTION('',(1.,0.,0.)); +#408728 = ORIENTED_EDGE('',*,*,#408729,.F.); +#408729 = EDGE_CURVE('',#408730,#408722,#408732,.T.); +#408730 = VERTEX_POINT('',#408731); +#408731 = CARTESIAN_POINT('',(125.135,-122.18,0.)); +#408732 = LINE('',#408733,#408734); +#408733 = CARTESIAN_POINT('',(125.135,-122.18,0.)); +#408734 = VECTOR('',#408735,1.); +#408735 = DIRECTION('',(0.,0.,-1.)); +#408736 = ORIENTED_EDGE('',*,*,#408737,.F.); +#408737 = EDGE_CURVE('',#408698,#408730,#408738,.T.); +#408738 = LINE('',#408739,#408740); +#408739 = CARTESIAN_POINT('',(124.865,-122.18,0.)); +#408740 = VECTOR('',#408741,1.); +#408741 = DIRECTION('',(1.,0.,0.)); +#408742 = PLANE('',#408743); +#408743 = AXIS2_PLACEMENT_3D('',#408744,#408745,#408746); +#408744 = CARTESIAN_POINT('',(124.865,-122.18,0.)); +#408745 = DIRECTION('',(0.,-1.,0.)); +#408746 = DIRECTION('',(1.,0.,0.)); +#408747 = ADVANCED_FACE('',(#408748),#408775,.T.); +#408748 = FACE_BOUND('',#408749,.F.); +#408749 = EDGE_LOOP('',(#408750,#408751,#408760,#408768)); +#408750 = ORIENTED_EDGE('',*,*,#408729,.T.); +#408751 = ORIENTED_EDGE('',*,*,#408752,.T.); +#408752 = EDGE_CURVE('',#408722,#408753,#408755,.T.); +#408753 = VERTEX_POINT('',#408754); +#408754 = CARTESIAN_POINT('',(125.27,-122.315,-4.E-02)); +#408755 = CIRCLE('',#408756,0.135001418495); +#408756 = AXIS2_PLACEMENT_3D('',#408757,#408758,#408759); +#408757 = CARTESIAN_POINT('',(125.13499858151,-122.3150014184,-4.E-02)); +#408758 = DIRECTION('',(0.,0.,-1.)); +#408759 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#408760 = ORIENTED_EDGE('',*,*,#408761,.F.); +#408761 = EDGE_CURVE('',#408762,#408753,#408764,.T.); +#408762 = VERTEX_POINT('',#408763); +#408763 = CARTESIAN_POINT('',(125.27,-122.315,0.)); +#408764 = LINE('',#408765,#408766); +#408765 = CARTESIAN_POINT('',(125.27,-122.315,0.)); +#408766 = VECTOR('',#408767,1.); +#408767 = DIRECTION('',(0.,0.,-1.)); +#408768 = ORIENTED_EDGE('',*,*,#408769,.F.); +#408769 = EDGE_CURVE('',#408730,#408762,#408770,.T.); +#408770 = CIRCLE('',#408771,0.135001418495); +#408771 = AXIS2_PLACEMENT_3D('',#408772,#408773,#408774); +#408772 = CARTESIAN_POINT('',(125.13499858151,-122.3150014184,0.)); +#408773 = DIRECTION('',(0.,0.,-1.)); +#408774 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#408775 = CYLINDRICAL_SURFACE('',#408776,0.135001418495); +#408776 = AXIS2_PLACEMENT_3D('',#408777,#408778,#408779); +#408777 = CARTESIAN_POINT('',(125.13499858151,-122.3150014184,0.)); +#408778 = DIRECTION('',(-0.,-0.,1.)); +#408779 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#408780 = ADVANCED_FACE('',(#408781),#408806,.F.); +#408781 = FACE_BOUND('',#408782,.F.); +#408782 = EDGE_LOOP('',(#408783,#408784,#408792,#408800)); +#408783 = ORIENTED_EDGE('',*,*,#408761,.T.); +#408784 = ORIENTED_EDGE('',*,*,#408785,.T.); +#408785 = EDGE_CURVE('',#408753,#408786,#408788,.T.); +#408786 = VERTEX_POINT('',#408787); +#408787 = CARTESIAN_POINT('',(125.27,-122.685,-4.E-02)); +#408788 = LINE('',#408789,#408790); +#408789 = CARTESIAN_POINT('',(125.27,-122.315,-4.E-02)); +#408790 = VECTOR('',#408791,1.); +#408791 = DIRECTION('',(0.,-1.,0.)); +#408792 = ORIENTED_EDGE('',*,*,#408793,.F.); +#408793 = EDGE_CURVE('',#408794,#408786,#408796,.T.); +#408794 = VERTEX_POINT('',#408795); +#408795 = CARTESIAN_POINT('',(125.27,-122.685,0.)); +#408796 = LINE('',#408797,#408798); +#408797 = CARTESIAN_POINT('',(125.27,-122.685,0.)); +#408798 = VECTOR('',#408799,1.); +#408799 = DIRECTION('',(0.,0.,-1.)); +#408800 = ORIENTED_EDGE('',*,*,#408801,.F.); +#408801 = EDGE_CURVE('',#408762,#408794,#408802,.T.); +#408802 = LINE('',#408803,#408804); +#408803 = CARTESIAN_POINT('',(125.27,-122.315,0.)); +#408804 = VECTOR('',#408805,1.); +#408805 = DIRECTION('',(0.,-1.,0.)); +#408806 = PLANE('',#408807); +#408807 = AXIS2_PLACEMENT_3D('',#408808,#408809,#408810); +#408808 = CARTESIAN_POINT('',(125.27,-122.315,0.)); +#408809 = DIRECTION('',(-1.,-0.,-0.)); +#408810 = DIRECTION('',(0.,-1.,0.)); +#408811 = ADVANCED_FACE('',(#408812),#408839,.T.); +#408812 = FACE_BOUND('',#408813,.F.); +#408813 = EDGE_LOOP('',(#408814,#408815,#408824,#408832)); +#408814 = ORIENTED_EDGE('',*,*,#408793,.T.); +#408815 = ORIENTED_EDGE('',*,*,#408816,.T.); +#408816 = EDGE_CURVE('',#408786,#408817,#408819,.T.); +#408817 = VERTEX_POINT('',#408818); +#408818 = CARTESIAN_POINT('',(125.135,-122.82,-4.E-02)); +#408819 = CIRCLE('',#408820,0.135001418495); +#408820 = AXIS2_PLACEMENT_3D('',#408821,#408822,#408823); +#408821 = CARTESIAN_POINT('',(125.13499858151,-122.6849985815,-4.E-02)); +#408822 = DIRECTION('',(0.,0.,-1.)); +#408823 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408824 = ORIENTED_EDGE('',*,*,#408825,.F.); +#408825 = EDGE_CURVE('',#408826,#408817,#408828,.T.); +#408826 = VERTEX_POINT('',#408827); +#408827 = CARTESIAN_POINT('',(125.135,-122.82,0.)); +#408828 = LINE('',#408829,#408830); +#408829 = CARTESIAN_POINT('',(125.135,-122.82,0.)); +#408830 = VECTOR('',#408831,1.); +#408831 = DIRECTION('',(0.,0.,-1.)); +#408832 = ORIENTED_EDGE('',*,*,#408833,.F.); +#408833 = EDGE_CURVE('',#408794,#408826,#408834,.T.); +#408834 = CIRCLE('',#408835,0.135001418495); +#408835 = AXIS2_PLACEMENT_3D('',#408836,#408837,#408838); +#408836 = CARTESIAN_POINT('',(125.13499858151,-122.6849985815,0.)); +#408837 = DIRECTION('',(0.,0.,-1.)); +#408838 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408839 = CYLINDRICAL_SURFACE('',#408840,0.135001418495); +#408840 = AXIS2_PLACEMENT_3D('',#408841,#408842,#408843); +#408841 = CARTESIAN_POINT('',(125.13499858151,-122.6849985815,0.)); +#408842 = DIRECTION('',(-0.,-0.,1.)); +#408843 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#408844 = ADVANCED_FACE('',(#408845),#408870,.F.); +#408845 = FACE_BOUND('',#408846,.F.); +#408846 = EDGE_LOOP('',(#408847,#408848,#408856,#408864)); +#408847 = ORIENTED_EDGE('',*,*,#408825,.T.); +#408848 = ORIENTED_EDGE('',*,*,#408849,.T.); +#408849 = EDGE_CURVE('',#408817,#408850,#408852,.T.); +#408850 = VERTEX_POINT('',#408851); +#408851 = CARTESIAN_POINT('',(124.865,-122.82,-4.E-02)); +#408852 = LINE('',#408853,#408854); +#408853 = CARTESIAN_POINT('',(125.135,-122.82,-4.E-02)); +#408854 = VECTOR('',#408855,1.); +#408855 = DIRECTION('',(-1.,0.,0.)); +#408856 = ORIENTED_EDGE('',*,*,#408857,.F.); +#408857 = EDGE_CURVE('',#408858,#408850,#408860,.T.); +#408858 = VERTEX_POINT('',#408859); +#408859 = CARTESIAN_POINT('',(124.865,-122.82,0.)); +#408860 = LINE('',#408861,#408862); +#408861 = CARTESIAN_POINT('',(124.865,-122.82,0.)); +#408862 = VECTOR('',#408863,1.); +#408863 = DIRECTION('',(0.,0.,-1.)); +#408864 = ORIENTED_EDGE('',*,*,#408865,.F.); +#408865 = EDGE_CURVE('',#408826,#408858,#408866,.T.); +#408866 = LINE('',#408867,#408868); +#408867 = CARTESIAN_POINT('',(125.135,-122.82,0.)); +#408868 = VECTOR('',#408869,1.); +#408869 = DIRECTION('',(-1.,0.,0.)); +#408870 = PLANE('',#408871); +#408871 = AXIS2_PLACEMENT_3D('',#408872,#408873,#408874); +#408872 = CARTESIAN_POINT('',(125.135,-122.82,0.)); +#408873 = DIRECTION('',(0.,1.,0.)); +#408874 = DIRECTION('',(-1.,0.,0.)); +#408875 = ADVANCED_FACE('',(#408876),#408903,.T.); +#408876 = FACE_BOUND('',#408877,.F.); +#408877 = EDGE_LOOP('',(#408878,#408879,#408888,#408896)); +#408878 = ORIENTED_EDGE('',*,*,#408857,.T.); +#408879 = ORIENTED_EDGE('',*,*,#408880,.T.); +#408880 = EDGE_CURVE('',#408850,#408881,#408883,.T.); +#408881 = VERTEX_POINT('',#408882); +#408882 = CARTESIAN_POINT('',(124.73,-122.685,-4.E-02)); +#408883 = CIRCLE('',#408884,0.135001418495); +#408884 = AXIS2_PLACEMENT_3D('',#408885,#408886,#408887); +#408885 = CARTESIAN_POINT('',(124.86500141848,-122.6849985815,-4.E-02)); +#408886 = DIRECTION('',(0.,0.,-1.)); +#408887 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#408888 = ORIENTED_EDGE('',*,*,#408889,.F.); +#408889 = EDGE_CURVE('',#408890,#408881,#408892,.T.); +#408890 = VERTEX_POINT('',#408891); +#408891 = CARTESIAN_POINT('',(124.73,-122.685,0.)); +#408892 = LINE('',#408893,#408894); +#408893 = CARTESIAN_POINT('',(124.73,-122.685,0.)); +#408894 = VECTOR('',#408895,1.); +#408895 = DIRECTION('',(0.,0.,-1.)); +#408896 = ORIENTED_EDGE('',*,*,#408897,.F.); +#408897 = EDGE_CURVE('',#408858,#408890,#408898,.T.); +#408898 = CIRCLE('',#408899,0.135001418495); +#408899 = AXIS2_PLACEMENT_3D('',#408900,#408901,#408902); +#408900 = CARTESIAN_POINT('',(124.86500141848,-122.6849985815,0.)); +#408901 = DIRECTION('',(0.,0.,-1.)); +#408902 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#408903 = CYLINDRICAL_SURFACE('',#408904,0.135001418495); +#408904 = AXIS2_PLACEMENT_3D('',#408905,#408906,#408907); +#408905 = CARTESIAN_POINT('',(124.86500141848,-122.6849985815,0.)); +#408906 = DIRECTION('',(-0.,-0.,1.)); +#408907 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#408908 = ADVANCED_FACE('',(#408909),#408925,.F.); +#408909 = FACE_BOUND('',#408910,.F.); +#408910 = EDGE_LOOP('',(#408911,#408912,#408918,#408919)); +#408911 = ORIENTED_EDGE('',*,*,#408889,.T.); +#408912 = ORIENTED_EDGE('',*,*,#408913,.T.); +#408913 = EDGE_CURVE('',#408881,#408681,#408914,.T.); +#408914 = LINE('',#408915,#408916); +#408915 = CARTESIAN_POINT('',(124.73,-122.685,-4.E-02)); +#408916 = VECTOR('',#408917,1.); +#408917 = DIRECTION('',(0.,1.,0.)); +#408918 = ORIENTED_EDGE('',*,*,#408678,.F.); +#408919 = ORIENTED_EDGE('',*,*,#408920,.F.); +#408920 = EDGE_CURVE('',#408890,#408679,#408921,.T.); +#408921 = LINE('',#408922,#408923); +#408922 = CARTESIAN_POINT('',(124.73,-122.685,0.)); +#408923 = VECTOR('',#408924,1.); +#408924 = DIRECTION('',(0.,1.,0.)); +#408925 = PLANE('',#408926); +#408926 = AXIS2_PLACEMENT_3D('',#408927,#408928,#408929); +#408927 = CARTESIAN_POINT('',(124.73,-122.685,0.)); +#408928 = DIRECTION('',(1.,-0.,0.)); +#408929 = DIRECTION('',(0.,1.,0.)); +#408930 = ADVANCED_FACE('',(#408931),#408941,.F.); +#408931 = FACE_BOUND('',#408932,.F.); +#408932 = EDGE_LOOP('',(#408933,#408934,#408935,#408936,#408937,#408938, + #408939,#408940)); +#408933 = ORIENTED_EDGE('',*,*,#408705,.T.); +#408934 = ORIENTED_EDGE('',*,*,#408737,.T.); +#408935 = ORIENTED_EDGE('',*,*,#408769,.T.); +#408936 = ORIENTED_EDGE('',*,*,#408801,.T.); +#408937 = ORIENTED_EDGE('',*,*,#408833,.T.); +#408938 = ORIENTED_EDGE('',*,*,#408865,.T.); +#408939 = ORIENTED_EDGE('',*,*,#408897,.T.); +#408940 = ORIENTED_EDGE('',*,*,#408920,.T.); +#408941 = PLANE('',#408942); +#408942 = AXIS2_PLACEMENT_3D('',#408943,#408944,#408945); +#408943 = CARTESIAN_POINT('',(0.,0.,0.)); +#408944 = DIRECTION('',(-0.,-0.,-1.)); +#408945 = DIRECTION('',(-1.,0.,0.)); +#408946 = ADVANCED_FACE('',(#408947),#408957,.T.); +#408947 = FACE_BOUND('',#408948,.T.); +#408948 = EDGE_LOOP('',(#408949,#408950,#408951,#408952,#408953,#408954, + #408955,#408956)); +#408949 = ORIENTED_EDGE('',*,*,#408688,.T.); +#408950 = ORIENTED_EDGE('',*,*,#408721,.T.); +#408951 = ORIENTED_EDGE('',*,*,#408752,.T.); +#408952 = ORIENTED_EDGE('',*,*,#408785,.T.); +#408953 = ORIENTED_EDGE('',*,*,#408816,.T.); +#408954 = ORIENTED_EDGE('',*,*,#408849,.T.); +#408955 = ORIENTED_EDGE('',*,*,#408880,.T.); +#408956 = ORIENTED_EDGE('',*,*,#408913,.T.); +#408957 = PLANE('',#408958); +#408958 = AXIS2_PLACEMENT_3D('',#408959,#408960,#408961); +#408959 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#408960 = DIRECTION('',(-0.,-0.,-1.)); +#408961 = DIRECTION('',(-1.,0.,0.)); +#408962 = MANIFOLD_SOLID_BREP('',#408963); +#408963 = CLOSED_SHELL('',(#408964,#409006,#409037,#409070,#409101, + #409134,#409165,#409198,#409220,#409236)); +#408964 = ADVANCED_FACE('',(#408965),#409001,.T.); +#408965 = FACE_BOUND('',#408966,.F.); +#408966 = EDGE_LOOP('',(#408967,#408977,#408986,#408994)); +#408967 = ORIENTED_EDGE('',*,*,#408968,.T.); +#408968 = EDGE_CURVE('',#408969,#408971,#408973,.T.); +#408969 = VERTEX_POINT('',#408970); +#408970 = CARTESIAN_POINT('',(140.52,-79.23,0.)); +#408971 = VERTEX_POINT('',#408972); +#408972 = CARTESIAN_POINT('',(140.52,-79.23,-4.E-02)); +#408973 = LINE('',#408974,#408975); +#408974 = CARTESIAN_POINT('',(140.52,-79.23,0.)); +#408975 = VECTOR('',#408976,1.); +#408976 = DIRECTION('',(0.,0.,-1.)); +#408977 = ORIENTED_EDGE('',*,*,#408978,.T.); +#408978 = EDGE_CURVE('',#408971,#408979,#408981,.T.); +#408979 = VERTEX_POINT('',#408980); +#408980 = CARTESIAN_POINT('',(140.66,-79.09,-4.E-02)); +#408981 = CIRCLE('',#408982,0.139999827125); +#408982 = AXIS2_PLACEMENT_3D('',#408983,#408984,#408985); +#408983 = CARTESIAN_POINT('',(140.65999982712,-79.22999982712,-4.E-02)); +#408984 = DIRECTION('',(0.,0.,-1.)); +#408985 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#408986 = ORIENTED_EDGE('',*,*,#408987,.F.); +#408987 = EDGE_CURVE('',#408988,#408979,#408990,.T.); +#408988 = VERTEX_POINT('',#408989); +#408989 = CARTESIAN_POINT('',(140.66,-79.09,0.)); +#408990 = LINE('',#408991,#408992); +#408991 = CARTESIAN_POINT('',(140.66,-79.09,0.)); +#408992 = VECTOR('',#408993,1.); +#408993 = DIRECTION('',(0.,0.,-1.)); +#408994 = ORIENTED_EDGE('',*,*,#408995,.F.); +#408995 = EDGE_CURVE('',#408969,#408988,#408996,.T.); +#408996 = CIRCLE('',#408997,0.139999827125); +#408997 = AXIS2_PLACEMENT_3D('',#408998,#408999,#409000); +#408998 = CARTESIAN_POINT('',(140.65999982712,-79.22999982712,0.)); +#408999 = DIRECTION('',(0.,0.,-1.)); +#409000 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#409001 = CYLINDRICAL_SURFACE('',#409002,0.139999827125); +#409002 = AXIS2_PLACEMENT_3D('',#409003,#409004,#409005); +#409003 = CARTESIAN_POINT('',(140.65999982712,-79.22999982712,0.)); +#409004 = DIRECTION('',(-0.,-0.,1.)); +#409005 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#409006 = ADVANCED_FACE('',(#409007),#409032,.F.); +#409007 = FACE_BOUND('',#409008,.F.); +#409008 = EDGE_LOOP('',(#409009,#409010,#409018,#409026)); +#409009 = ORIENTED_EDGE('',*,*,#408987,.T.); +#409010 = ORIENTED_EDGE('',*,*,#409011,.T.); +#409011 = EDGE_CURVE('',#408979,#409012,#409014,.T.); +#409012 = VERTEX_POINT('',#409013); +#409013 = CARTESIAN_POINT('',(140.94,-79.09,-4.E-02)); +#409014 = LINE('',#409015,#409016); +#409015 = CARTESIAN_POINT('',(140.66,-79.09,-4.E-02)); +#409016 = VECTOR('',#409017,1.); +#409017 = DIRECTION('',(1.,0.,0.)); +#409018 = ORIENTED_EDGE('',*,*,#409019,.F.); +#409019 = EDGE_CURVE('',#409020,#409012,#409022,.T.); +#409020 = VERTEX_POINT('',#409021); +#409021 = CARTESIAN_POINT('',(140.94,-79.09,0.)); +#409022 = LINE('',#409023,#409024); +#409023 = CARTESIAN_POINT('',(140.94,-79.09,0.)); +#409024 = VECTOR('',#409025,1.); +#409025 = DIRECTION('',(0.,0.,-1.)); +#409026 = ORIENTED_EDGE('',*,*,#409027,.F.); +#409027 = EDGE_CURVE('',#408988,#409020,#409028,.T.); +#409028 = LINE('',#409029,#409030); +#409029 = CARTESIAN_POINT('',(140.66,-79.09,0.)); +#409030 = VECTOR('',#409031,1.); +#409031 = DIRECTION('',(1.,0.,0.)); +#409032 = PLANE('',#409033); +#409033 = AXIS2_PLACEMENT_3D('',#409034,#409035,#409036); +#409034 = CARTESIAN_POINT('',(140.66,-79.09,0.)); +#409035 = DIRECTION('',(0.,-1.,0.)); +#409036 = DIRECTION('',(1.,0.,0.)); +#409037 = ADVANCED_FACE('',(#409038),#409065,.T.); +#409038 = FACE_BOUND('',#409039,.F.); +#409039 = EDGE_LOOP('',(#409040,#409041,#409050,#409058)); +#409040 = ORIENTED_EDGE('',*,*,#409019,.T.); +#409041 = ORIENTED_EDGE('',*,*,#409042,.T.); +#409042 = EDGE_CURVE('',#409012,#409043,#409045,.T.); +#409043 = VERTEX_POINT('',#409044); +#409044 = CARTESIAN_POINT('',(141.08,-79.23,-4.E-02)); +#409045 = CIRCLE('',#409046,0.139999827126); +#409046 = AXIS2_PLACEMENT_3D('',#409047,#409048,#409049); +#409047 = CARTESIAN_POINT('',(140.94000017287,-79.22999982712,-4.E-02)); +#409048 = DIRECTION('',(0.,0.,-1.)); +#409049 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#409050 = ORIENTED_EDGE('',*,*,#409051,.F.); +#409051 = EDGE_CURVE('',#409052,#409043,#409054,.T.); +#409052 = VERTEX_POINT('',#409053); +#409053 = CARTESIAN_POINT('',(141.08,-79.23,0.)); +#409054 = LINE('',#409055,#409056); +#409055 = CARTESIAN_POINT('',(141.08,-79.23,0.)); +#409056 = VECTOR('',#409057,1.); +#409057 = DIRECTION('',(0.,0.,-1.)); +#409058 = ORIENTED_EDGE('',*,*,#409059,.F.); +#409059 = EDGE_CURVE('',#409020,#409052,#409060,.T.); +#409060 = CIRCLE('',#409061,0.139999827126); +#409061 = AXIS2_PLACEMENT_3D('',#409062,#409063,#409064); +#409062 = CARTESIAN_POINT('',(140.94000017287,-79.22999982712,0.)); +#409063 = DIRECTION('',(0.,0.,-1.)); +#409064 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#409065 = CYLINDRICAL_SURFACE('',#409066,0.139999827126); +#409066 = AXIS2_PLACEMENT_3D('',#409067,#409068,#409069); +#409067 = CARTESIAN_POINT('',(140.94000017287,-79.22999982712,0.)); +#409068 = DIRECTION('',(-0.,-0.,1.)); +#409069 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#409070 = ADVANCED_FACE('',(#409071),#409096,.F.); +#409071 = FACE_BOUND('',#409072,.F.); +#409072 = EDGE_LOOP('',(#409073,#409074,#409082,#409090)); +#409073 = ORIENTED_EDGE('',*,*,#409051,.T.); +#409074 = ORIENTED_EDGE('',*,*,#409075,.T.); +#409075 = EDGE_CURVE('',#409043,#409076,#409078,.T.); +#409076 = VERTEX_POINT('',#409077); +#409077 = CARTESIAN_POINT('',(141.08,-79.57,-4.E-02)); +#409078 = LINE('',#409079,#409080); +#409079 = CARTESIAN_POINT('',(141.08,-79.23,-4.E-02)); +#409080 = VECTOR('',#409081,1.); +#409081 = DIRECTION('',(0.,-1.,0.)); +#409082 = ORIENTED_EDGE('',*,*,#409083,.F.); +#409083 = EDGE_CURVE('',#409084,#409076,#409086,.T.); +#409084 = VERTEX_POINT('',#409085); +#409085 = CARTESIAN_POINT('',(141.08,-79.57,0.)); +#409086 = LINE('',#409087,#409088); +#409087 = CARTESIAN_POINT('',(141.08,-79.57,0.)); +#409088 = VECTOR('',#409089,1.); +#409089 = DIRECTION('',(0.,0.,-1.)); +#409090 = ORIENTED_EDGE('',*,*,#409091,.F.); +#409091 = EDGE_CURVE('',#409052,#409084,#409092,.T.); +#409092 = LINE('',#409093,#409094); +#409093 = CARTESIAN_POINT('',(141.08,-79.23,0.)); +#409094 = VECTOR('',#409095,1.); +#409095 = DIRECTION('',(0.,-1.,0.)); +#409096 = PLANE('',#409097); +#409097 = AXIS2_PLACEMENT_3D('',#409098,#409099,#409100); +#409098 = CARTESIAN_POINT('',(141.08,-79.23,0.)); +#409099 = DIRECTION('',(-1.,-0.,-0.)); +#409100 = DIRECTION('',(0.,-1.,0.)); +#409101 = ADVANCED_FACE('',(#409102),#409129,.T.); +#409102 = FACE_BOUND('',#409103,.F.); +#409103 = EDGE_LOOP('',(#409104,#409105,#409114,#409122)); +#409104 = ORIENTED_EDGE('',*,*,#409083,.T.); +#409105 = ORIENTED_EDGE('',*,*,#409106,.T.); +#409106 = EDGE_CURVE('',#409076,#409107,#409109,.T.); +#409107 = VERTEX_POINT('',#409108); +#409108 = CARTESIAN_POINT('',(140.94,-79.71,-4.E-02)); +#409109 = CIRCLE('',#409110,0.139999827126); +#409110 = AXIS2_PLACEMENT_3D('',#409111,#409112,#409113); +#409111 = CARTESIAN_POINT('',(140.94000017287,-79.57000017287,-4.E-02)); +#409112 = DIRECTION('',(0.,0.,-1.)); +#409113 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#409114 = ORIENTED_EDGE('',*,*,#409115,.F.); +#409115 = EDGE_CURVE('',#409116,#409107,#409118,.T.); +#409116 = VERTEX_POINT('',#409117); +#409117 = CARTESIAN_POINT('',(140.94,-79.71,0.)); +#409118 = LINE('',#409119,#409120); +#409119 = CARTESIAN_POINT('',(140.94,-79.71,0.)); +#409120 = VECTOR('',#409121,1.); +#409121 = DIRECTION('',(0.,0.,-1.)); +#409122 = ORIENTED_EDGE('',*,*,#409123,.F.); +#409123 = EDGE_CURVE('',#409084,#409116,#409124,.T.); +#409124 = CIRCLE('',#409125,0.139999827126); +#409125 = AXIS2_PLACEMENT_3D('',#409126,#409127,#409128); +#409126 = CARTESIAN_POINT('',(140.94000017287,-79.57000017287,0.)); +#409127 = DIRECTION('',(0.,0.,-1.)); +#409128 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#409129 = CYLINDRICAL_SURFACE('',#409130,0.139999827126); +#409130 = AXIS2_PLACEMENT_3D('',#409131,#409132,#409133); +#409131 = CARTESIAN_POINT('',(140.94000017287,-79.57000017287,0.)); +#409132 = DIRECTION('',(-0.,-0.,1.)); +#409133 = DIRECTION('',(0.999999999999,1.234820146735E-06,0.)); +#409134 = ADVANCED_FACE('',(#409135),#409160,.F.); +#409135 = FACE_BOUND('',#409136,.F.); +#409136 = EDGE_LOOP('',(#409137,#409138,#409146,#409154)); +#409137 = ORIENTED_EDGE('',*,*,#409115,.T.); +#409138 = ORIENTED_EDGE('',*,*,#409139,.T.); +#409139 = EDGE_CURVE('',#409107,#409140,#409142,.T.); +#409140 = VERTEX_POINT('',#409141); +#409141 = CARTESIAN_POINT('',(140.66,-79.71,-4.E-02)); +#409142 = LINE('',#409143,#409144); +#409143 = CARTESIAN_POINT('',(140.94,-79.71,-4.E-02)); +#409144 = VECTOR('',#409145,1.); +#409145 = DIRECTION('',(-1.,0.,0.)); +#409146 = ORIENTED_EDGE('',*,*,#409147,.F.); +#409147 = EDGE_CURVE('',#409148,#409140,#409150,.T.); +#409148 = VERTEX_POINT('',#409149); +#409149 = CARTESIAN_POINT('',(140.66,-79.71,0.)); +#409150 = LINE('',#409151,#409152); +#409151 = CARTESIAN_POINT('',(140.66,-79.71,0.)); +#409152 = VECTOR('',#409153,1.); +#409153 = DIRECTION('',(0.,0.,-1.)); +#409154 = ORIENTED_EDGE('',*,*,#409155,.F.); +#409155 = EDGE_CURVE('',#409116,#409148,#409156,.T.); +#409156 = LINE('',#409157,#409158); +#409157 = CARTESIAN_POINT('',(140.94,-79.71,0.)); +#409158 = VECTOR('',#409159,1.); +#409159 = DIRECTION('',(-1.,0.,0.)); +#409160 = PLANE('',#409161); +#409161 = AXIS2_PLACEMENT_3D('',#409162,#409163,#409164); +#409162 = CARTESIAN_POINT('',(140.94,-79.71,0.)); +#409163 = DIRECTION('',(0.,1.,0.)); +#409164 = DIRECTION('',(-1.,0.,0.)); +#409165 = ADVANCED_FACE('',(#409166),#409193,.T.); +#409166 = FACE_BOUND('',#409167,.F.); +#409167 = EDGE_LOOP('',(#409168,#409169,#409178,#409186)); +#409168 = ORIENTED_EDGE('',*,*,#409147,.T.); +#409169 = ORIENTED_EDGE('',*,*,#409170,.T.); +#409170 = EDGE_CURVE('',#409140,#409171,#409173,.T.); +#409171 = VERTEX_POINT('',#409172); +#409172 = CARTESIAN_POINT('',(140.52,-79.57,-4.E-02)); +#409173 = CIRCLE('',#409174,0.139999827125); +#409174 = AXIS2_PLACEMENT_3D('',#409175,#409176,#409177); +#409175 = CARTESIAN_POINT('',(140.65999982712,-79.57000017287,-4.E-02)); +#409176 = DIRECTION('',(0.,0.,-1.)); +#409177 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#409178 = ORIENTED_EDGE('',*,*,#409179,.F.); +#409179 = EDGE_CURVE('',#409180,#409171,#409182,.T.); +#409180 = VERTEX_POINT('',#409181); +#409181 = CARTESIAN_POINT('',(140.52,-79.57,0.)); +#409182 = LINE('',#409183,#409184); +#409183 = CARTESIAN_POINT('',(140.52,-79.57,0.)); +#409184 = VECTOR('',#409185,1.); +#409185 = DIRECTION('',(0.,0.,-1.)); +#409186 = ORIENTED_EDGE('',*,*,#409187,.F.); +#409187 = EDGE_CURVE('',#409148,#409180,#409188,.T.); +#409188 = CIRCLE('',#409189,0.139999827125); +#409189 = AXIS2_PLACEMENT_3D('',#409190,#409191,#409192); +#409190 = CARTESIAN_POINT('',(140.65999982712,-79.57000017287,0.)); +#409191 = DIRECTION('',(0.,0.,-1.)); +#409192 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#409193 = CYLINDRICAL_SURFACE('',#409194,0.139999827125); +#409194 = AXIS2_PLACEMENT_3D('',#409195,#409196,#409197); +#409195 = CARTESIAN_POINT('',(140.65999982712,-79.57000017287,0.)); +#409196 = DIRECTION('',(-0.,-0.,1.)); +#409197 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#409198 = ADVANCED_FACE('',(#409199),#409215,.F.); +#409199 = FACE_BOUND('',#409200,.F.); +#409200 = EDGE_LOOP('',(#409201,#409202,#409208,#409209)); +#409201 = ORIENTED_EDGE('',*,*,#409179,.T.); +#409202 = ORIENTED_EDGE('',*,*,#409203,.T.); +#409203 = EDGE_CURVE('',#409171,#408971,#409204,.T.); +#409204 = LINE('',#409205,#409206); +#409205 = CARTESIAN_POINT('',(140.52,-79.57,-4.E-02)); +#409206 = VECTOR('',#409207,1.); +#409207 = DIRECTION('',(0.,1.,0.)); +#409208 = ORIENTED_EDGE('',*,*,#408968,.F.); +#409209 = ORIENTED_EDGE('',*,*,#409210,.F.); +#409210 = EDGE_CURVE('',#409180,#408969,#409211,.T.); +#409211 = LINE('',#409212,#409213); +#409212 = CARTESIAN_POINT('',(140.52,-79.57,0.)); +#409213 = VECTOR('',#409214,1.); +#409214 = DIRECTION('',(0.,1.,0.)); +#409215 = PLANE('',#409216); +#409216 = AXIS2_PLACEMENT_3D('',#409217,#409218,#409219); +#409217 = CARTESIAN_POINT('',(140.52,-79.57,0.)); +#409218 = DIRECTION('',(1.,-0.,0.)); +#409219 = DIRECTION('',(0.,1.,0.)); +#409220 = ADVANCED_FACE('',(#409221),#409231,.F.); +#409221 = FACE_BOUND('',#409222,.F.); +#409222 = EDGE_LOOP('',(#409223,#409224,#409225,#409226,#409227,#409228, + #409229,#409230)); +#409223 = ORIENTED_EDGE('',*,*,#408995,.T.); +#409224 = ORIENTED_EDGE('',*,*,#409027,.T.); +#409225 = ORIENTED_EDGE('',*,*,#409059,.T.); +#409226 = ORIENTED_EDGE('',*,*,#409091,.T.); +#409227 = ORIENTED_EDGE('',*,*,#409123,.T.); +#409228 = ORIENTED_EDGE('',*,*,#409155,.T.); +#409229 = ORIENTED_EDGE('',*,*,#409187,.T.); +#409230 = ORIENTED_EDGE('',*,*,#409210,.T.); +#409231 = PLANE('',#409232); +#409232 = AXIS2_PLACEMENT_3D('',#409233,#409234,#409235); +#409233 = CARTESIAN_POINT('',(0.,0.,0.)); +#409234 = DIRECTION('',(-0.,-0.,-1.)); +#409235 = DIRECTION('',(-1.,0.,0.)); +#409236 = ADVANCED_FACE('',(#409237),#409247,.T.); +#409237 = FACE_BOUND('',#409238,.T.); +#409238 = EDGE_LOOP('',(#409239,#409240,#409241,#409242,#409243,#409244, + #409245,#409246)); +#409239 = ORIENTED_EDGE('',*,*,#408978,.T.); +#409240 = ORIENTED_EDGE('',*,*,#409011,.T.); +#409241 = ORIENTED_EDGE('',*,*,#409042,.T.); +#409242 = ORIENTED_EDGE('',*,*,#409075,.T.); +#409243 = ORIENTED_EDGE('',*,*,#409106,.T.); +#409244 = ORIENTED_EDGE('',*,*,#409139,.T.); +#409245 = ORIENTED_EDGE('',*,*,#409170,.T.); +#409246 = ORIENTED_EDGE('',*,*,#409203,.T.); +#409247 = PLANE('',#409248); +#409248 = AXIS2_PLACEMENT_3D('',#409249,#409250,#409251); +#409249 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#409250 = DIRECTION('',(-0.,-0.,-1.)); +#409251 = DIRECTION('',(-1.,0.,0.)); +#409252 = MANIFOLD_SOLID_BREP('',#409253); +#409253 = CLOSED_SHELL('',(#409254,#409296,#409327,#409360,#409391, + #409424,#409455,#409488,#409510,#409526)); +#409254 = ADVANCED_FACE('',(#409255),#409291,.T.); +#409255 = FACE_BOUND('',#409256,.F.); +#409256 = EDGE_LOOP('',(#409257,#409267,#409276,#409284)); +#409257 = ORIENTED_EDGE('',*,*,#409258,.T.); +#409258 = EDGE_CURVE('',#409259,#409261,#409263,.T.); +#409259 = VERTEX_POINT('',#409260); +#409260 = CARTESIAN_POINT('',(124.75,-120.815,0.)); +#409261 = VERTEX_POINT('',#409262); +#409262 = CARTESIAN_POINT('',(124.75,-120.815,-4.E-02)); +#409263 = LINE('',#409264,#409265); +#409264 = CARTESIAN_POINT('',(124.75,-120.815,0.)); +#409265 = VECTOR('',#409266,1.); +#409266 = DIRECTION('',(0.,0.,-1.)); +#409267 = ORIENTED_EDGE('',*,*,#409268,.T.); +#409268 = EDGE_CURVE('',#409261,#409269,#409271,.T.); +#409269 = VERTEX_POINT('',#409270); +#409270 = CARTESIAN_POINT('',(124.885,-120.68,-4.E-02)); +#409271 = CIRCLE('',#409272,0.135001418495); +#409272 = AXIS2_PLACEMENT_3D('',#409273,#409274,#409275); +#409273 = CARTESIAN_POINT('',(124.88500141848,-120.8150014184,-4.E-02)); +#409274 = DIRECTION('',(0.,0.,-1.)); +#409275 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#409276 = ORIENTED_EDGE('',*,*,#409277,.F.); +#409277 = EDGE_CURVE('',#409278,#409269,#409280,.T.); +#409278 = VERTEX_POINT('',#409279); +#409279 = CARTESIAN_POINT('',(124.885,-120.68,0.)); +#409280 = LINE('',#409281,#409282); +#409281 = CARTESIAN_POINT('',(124.885,-120.68,0.)); +#409282 = VECTOR('',#409283,1.); +#409283 = DIRECTION('',(0.,0.,-1.)); +#409284 = ORIENTED_EDGE('',*,*,#409285,.F.); +#409285 = EDGE_CURVE('',#409259,#409278,#409286,.T.); +#409286 = CIRCLE('',#409287,0.135001418495); +#409287 = AXIS2_PLACEMENT_3D('',#409288,#409289,#409290); +#409288 = CARTESIAN_POINT('',(124.88500141848,-120.8150014184,0.)); +#409289 = DIRECTION('',(0.,0.,-1.)); +#409290 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#409291 = CYLINDRICAL_SURFACE('',#409292,0.135001418495); +#409292 = AXIS2_PLACEMENT_3D('',#409293,#409294,#409295); +#409293 = CARTESIAN_POINT('',(124.88500141848,-120.8150014184,0.)); +#409294 = DIRECTION('',(-0.,-0.,1.)); +#409295 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#409296 = ADVANCED_FACE('',(#409297),#409322,.F.); +#409297 = FACE_BOUND('',#409298,.F.); +#409298 = EDGE_LOOP('',(#409299,#409300,#409308,#409316)); +#409299 = ORIENTED_EDGE('',*,*,#409277,.T.); +#409300 = ORIENTED_EDGE('',*,*,#409301,.T.); +#409301 = EDGE_CURVE('',#409269,#409302,#409304,.T.); +#409302 = VERTEX_POINT('',#409303); +#409303 = CARTESIAN_POINT('',(125.155,-120.68,-4.E-02)); +#409304 = LINE('',#409305,#409306); +#409305 = CARTESIAN_POINT('',(124.885,-120.68,-4.E-02)); +#409306 = VECTOR('',#409307,1.); +#409307 = DIRECTION('',(1.,0.,0.)); +#409308 = ORIENTED_EDGE('',*,*,#409309,.F.); +#409309 = EDGE_CURVE('',#409310,#409302,#409312,.T.); +#409310 = VERTEX_POINT('',#409311); +#409311 = CARTESIAN_POINT('',(125.155,-120.68,0.)); +#409312 = LINE('',#409313,#409314); +#409313 = CARTESIAN_POINT('',(125.155,-120.68,0.)); +#409314 = VECTOR('',#409315,1.); +#409315 = DIRECTION('',(0.,0.,-1.)); +#409316 = ORIENTED_EDGE('',*,*,#409317,.F.); +#409317 = EDGE_CURVE('',#409278,#409310,#409318,.T.); +#409318 = LINE('',#409319,#409320); +#409319 = CARTESIAN_POINT('',(124.885,-120.68,0.)); +#409320 = VECTOR('',#409321,1.); +#409321 = DIRECTION('',(1.,0.,0.)); +#409322 = PLANE('',#409323); +#409323 = AXIS2_PLACEMENT_3D('',#409324,#409325,#409326); +#409324 = CARTESIAN_POINT('',(124.885,-120.68,0.)); +#409325 = DIRECTION('',(0.,-1.,0.)); +#409326 = DIRECTION('',(1.,0.,0.)); +#409327 = ADVANCED_FACE('',(#409328),#409355,.T.); +#409328 = FACE_BOUND('',#409329,.F.); +#409329 = EDGE_LOOP('',(#409330,#409331,#409340,#409348)); +#409330 = ORIENTED_EDGE('',*,*,#409309,.T.); +#409331 = ORIENTED_EDGE('',*,*,#409332,.T.); +#409332 = EDGE_CURVE('',#409302,#409333,#409335,.T.); +#409333 = VERTEX_POINT('',#409334); +#409334 = CARTESIAN_POINT('',(125.29,-120.815,-4.E-02)); +#409335 = CIRCLE('',#409336,0.135001418495); +#409336 = AXIS2_PLACEMENT_3D('',#409337,#409338,#409339); +#409337 = CARTESIAN_POINT('',(125.15499858151,-120.8150014184,-4.E-02)); +#409338 = DIRECTION('',(0.,0.,-1.)); +#409339 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#409340 = ORIENTED_EDGE('',*,*,#409341,.F.); +#409341 = EDGE_CURVE('',#409342,#409333,#409344,.T.); +#409342 = VERTEX_POINT('',#409343); +#409343 = CARTESIAN_POINT('',(125.29,-120.815,0.)); +#409344 = LINE('',#409345,#409346); +#409345 = CARTESIAN_POINT('',(125.29,-120.815,0.)); +#409346 = VECTOR('',#409347,1.); +#409347 = DIRECTION('',(0.,0.,-1.)); +#409348 = ORIENTED_EDGE('',*,*,#409349,.F.); +#409349 = EDGE_CURVE('',#409310,#409342,#409350,.T.); +#409350 = CIRCLE('',#409351,0.135001418495); +#409351 = AXIS2_PLACEMENT_3D('',#409352,#409353,#409354); +#409352 = CARTESIAN_POINT('',(125.15499858151,-120.8150014184,0.)); +#409353 = DIRECTION('',(0.,0.,-1.)); +#409354 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#409355 = CYLINDRICAL_SURFACE('',#409356,0.135001418495); +#409356 = AXIS2_PLACEMENT_3D('',#409357,#409358,#409359); +#409357 = CARTESIAN_POINT('',(125.15499858151,-120.8150014184,0.)); +#409358 = DIRECTION('',(-0.,-0.,1.)); +#409359 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#409360 = ADVANCED_FACE('',(#409361),#409386,.F.); +#409361 = FACE_BOUND('',#409362,.F.); +#409362 = EDGE_LOOP('',(#409363,#409364,#409372,#409380)); +#409363 = ORIENTED_EDGE('',*,*,#409341,.T.); +#409364 = ORIENTED_EDGE('',*,*,#409365,.T.); +#409365 = EDGE_CURVE('',#409333,#409366,#409368,.T.); +#409366 = VERTEX_POINT('',#409367); +#409367 = CARTESIAN_POINT('',(125.29,-121.185,-4.E-02)); +#409368 = LINE('',#409369,#409370); +#409369 = CARTESIAN_POINT('',(125.29,-120.815,-4.E-02)); +#409370 = VECTOR('',#409371,1.); +#409371 = DIRECTION('',(0.,-1.,0.)); +#409372 = ORIENTED_EDGE('',*,*,#409373,.F.); +#409373 = EDGE_CURVE('',#409374,#409366,#409376,.T.); +#409374 = VERTEX_POINT('',#409375); +#409375 = CARTESIAN_POINT('',(125.29,-121.185,0.)); +#409376 = LINE('',#409377,#409378); +#409377 = CARTESIAN_POINT('',(125.29,-121.185,0.)); +#409378 = VECTOR('',#409379,1.); +#409379 = DIRECTION('',(0.,0.,-1.)); +#409380 = ORIENTED_EDGE('',*,*,#409381,.F.); +#409381 = EDGE_CURVE('',#409342,#409374,#409382,.T.); +#409382 = LINE('',#409383,#409384); +#409383 = CARTESIAN_POINT('',(125.29,-120.815,0.)); +#409384 = VECTOR('',#409385,1.); +#409385 = DIRECTION('',(0.,-1.,0.)); +#409386 = PLANE('',#409387); +#409387 = AXIS2_PLACEMENT_3D('',#409388,#409389,#409390); +#409388 = CARTESIAN_POINT('',(125.29,-120.815,0.)); +#409389 = DIRECTION('',(-1.,-0.,-0.)); +#409390 = DIRECTION('',(0.,-1.,0.)); +#409391 = ADVANCED_FACE('',(#409392),#409419,.T.); +#409392 = FACE_BOUND('',#409393,.F.); +#409393 = EDGE_LOOP('',(#409394,#409395,#409404,#409412)); +#409394 = ORIENTED_EDGE('',*,*,#409373,.T.); +#409395 = ORIENTED_EDGE('',*,*,#409396,.T.); +#409396 = EDGE_CURVE('',#409366,#409397,#409399,.T.); +#409397 = VERTEX_POINT('',#409398); +#409398 = CARTESIAN_POINT('',(125.155,-121.32,-4.E-02)); +#409399 = CIRCLE('',#409400,0.135001418495); +#409400 = AXIS2_PLACEMENT_3D('',#409401,#409402,#409403); +#409401 = CARTESIAN_POINT('',(125.15499858151,-121.1849985815,-4.E-02)); +#409402 = DIRECTION('',(0.,0.,-1.)); +#409403 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#409404 = ORIENTED_EDGE('',*,*,#409405,.F.); +#409405 = EDGE_CURVE('',#409406,#409397,#409408,.T.); +#409406 = VERTEX_POINT('',#409407); +#409407 = CARTESIAN_POINT('',(125.155,-121.32,0.)); +#409408 = LINE('',#409409,#409410); +#409409 = CARTESIAN_POINT('',(125.155,-121.32,0.)); +#409410 = VECTOR('',#409411,1.); +#409411 = DIRECTION('',(0.,0.,-1.)); +#409412 = ORIENTED_EDGE('',*,*,#409413,.F.); +#409413 = EDGE_CURVE('',#409374,#409406,#409414,.T.); +#409414 = CIRCLE('',#409415,0.135001418495); +#409415 = AXIS2_PLACEMENT_3D('',#409416,#409417,#409418); +#409416 = CARTESIAN_POINT('',(125.15499858151,-121.1849985815,0.)); +#409417 = DIRECTION('',(0.,0.,-1.)); +#409418 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#409419 = CYLINDRICAL_SURFACE('',#409420,0.135001418495); +#409420 = AXIS2_PLACEMENT_3D('',#409421,#409422,#409423); +#409421 = CARTESIAN_POINT('',(125.15499858151,-121.1849985815,0.)); +#409422 = DIRECTION('',(-0.,-0.,1.)); +#409423 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#409424 = ADVANCED_FACE('',(#409425),#409450,.F.); +#409425 = FACE_BOUND('',#409426,.F.); +#409426 = EDGE_LOOP('',(#409427,#409428,#409436,#409444)); +#409427 = ORIENTED_EDGE('',*,*,#409405,.T.); +#409428 = ORIENTED_EDGE('',*,*,#409429,.T.); +#409429 = EDGE_CURVE('',#409397,#409430,#409432,.T.); +#409430 = VERTEX_POINT('',#409431); +#409431 = CARTESIAN_POINT('',(124.885,-121.32,-4.E-02)); +#409432 = LINE('',#409433,#409434); +#409433 = CARTESIAN_POINT('',(125.155,-121.32,-4.E-02)); +#409434 = VECTOR('',#409435,1.); +#409435 = DIRECTION('',(-1.,0.,0.)); +#409436 = ORIENTED_EDGE('',*,*,#409437,.F.); +#409437 = EDGE_CURVE('',#409438,#409430,#409440,.T.); +#409438 = VERTEX_POINT('',#409439); +#409439 = CARTESIAN_POINT('',(124.885,-121.32,0.)); +#409440 = LINE('',#409441,#409442); +#409441 = CARTESIAN_POINT('',(124.885,-121.32,0.)); +#409442 = VECTOR('',#409443,1.); +#409443 = DIRECTION('',(0.,0.,-1.)); +#409444 = ORIENTED_EDGE('',*,*,#409445,.F.); +#409445 = EDGE_CURVE('',#409406,#409438,#409446,.T.); +#409446 = LINE('',#409447,#409448); +#409447 = CARTESIAN_POINT('',(125.155,-121.32,0.)); +#409448 = VECTOR('',#409449,1.); +#409449 = DIRECTION('',(-1.,0.,0.)); +#409450 = PLANE('',#409451); +#409451 = AXIS2_PLACEMENT_3D('',#409452,#409453,#409454); +#409452 = CARTESIAN_POINT('',(125.155,-121.32,0.)); +#409453 = DIRECTION('',(0.,1.,0.)); +#409454 = DIRECTION('',(-1.,0.,0.)); +#409455 = ADVANCED_FACE('',(#409456),#409483,.T.); +#409456 = FACE_BOUND('',#409457,.F.); +#409457 = EDGE_LOOP('',(#409458,#409459,#409468,#409476)); +#409458 = ORIENTED_EDGE('',*,*,#409437,.T.); +#409459 = ORIENTED_EDGE('',*,*,#409460,.T.); +#409460 = EDGE_CURVE('',#409430,#409461,#409463,.T.); +#409461 = VERTEX_POINT('',#409462); +#409462 = CARTESIAN_POINT('',(124.75,-121.185,-4.E-02)); +#409463 = CIRCLE('',#409464,0.135001418495); +#409464 = AXIS2_PLACEMENT_3D('',#409465,#409466,#409467); +#409465 = CARTESIAN_POINT('',(124.88500141848,-121.1849985815,-4.E-02)); +#409466 = DIRECTION('',(0.,0.,-1.)); +#409467 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#409468 = ORIENTED_EDGE('',*,*,#409469,.F.); +#409469 = EDGE_CURVE('',#409470,#409461,#409472,.T.); +#409470 = VERTEX_POINT('',#409471); +#409471 = CARTESIAN_POINT('',(124.75,-121.185,0.)); +#409472 = LINE('',#409473,#409474); +#409473 = CARTESIAN_POINT('',(124.75,-121.185,0.)); +#409474 = VECTOR('',#409475,1.); +#409475 = DIRECTION('',(0.,0.,-1.)); +#409476 = ORIENTED_EDGE('',*,*,#409477,.F.); +#409477 = EDGE_CURVE('',#409438,#409470,#409478,.T.); +#409478 = CIRCLE('',#409479,0.135001418495); +#409479 = AXIS2_PLACEMENT_3D('',#409480,#409481,#409482); +#409480 = CARTESIAN_POINT('',(124.88500141848,-121.1849985815,0.)); +#409481 = DIRECTION('',(0.,0.,-1.)); +#409482 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#409483 = CYLINDRICAL_SURFACE('',#409484,0.135001418495); +#409484 = AXIS2_PLACEMENT_3D('',#409485,#409486,#409487); +#409485 = CARTESIAN_POINT('',(124.88500141848,-121.1849985815,0.)); +#409486 = DIRECTION('',(-0.,-0.,1.)); +#409487 = DIRECTION('',(-1.050720651629E-05,-0.999999999945,-0.)); +#409488 = ADVANCED_FACE('',(#409489),#409505,.F.); +#409489 = FACE_BOUND('',#409490,.F.); +#409490 = EDGE_LOOP('',(#409491,#409492,#409498,#409499)); +#409491 = ORIENTED_EDGE('',*,*,#409469,.T.); +#409492 = ORIENTED_EDGE('',*,*,#409493,.T.); +#409493 = EDGE_CURVE('',#409461,#409261,#409494,.T.); +#409494 = LINE('',#409495,#409496); +#409495 = CARTESIAN_POINT('',(124.75,-121.185,-4.E-02)); +#409496 = VECTOR('',#409497,1.); +#409497 = DIRECTION('',(0.,1.,0.)); +#409498 = ORIENTED_EDGE('',*,*,#409258,.F.); +#409499 = ORIENTED_EDGE('',*,*,#409500,.F.); +#409500 = EDGE_CURVE('',#409470,#409259,#409501,.T.); +#409501 = LINE('',#409502,#409503); +#409502 = CARTESIAN_POINT('',(124.75,-121.185,0.)); +#409503 = VECTOR('',#409504,1.); +#409504 = DIRECTION('',(0.,1.,0.)); +#409505 = PLANE('',#409506); +#409506 = AXIS2_PLACEMENT_3D('',#409507,#409508,#409509); +#409507 = CARTESIAN_POINT('',(124.75,-121.185,0.)); +#409508 = DIRECTION('',(1.,-0.,0.)); +#409509 = DIRECTION('',(0.,1.,0.)); +#409510 = ADVANCED_FACE('',(#409511),#409521,.F.); +#409511 = FACE_BOUND('',#409512,.F.); +#409512 = EDGE_LOOP('',(#409513,#409514,#409515,#409516,#409517,#409518, + #409519,#409520)); +#409513 = ORIENTED_EDGE('',*,*,#409285,.T.); +#409514 = ORIENTED_EDGE('',*,*,#409317,.T.); +#409515 = ORIENTED_EDGE('',*,*,#409349,.T.); +#409516 = ORIENTED_EDGE('',*,*,#409381,.T.); +#409517 = ORIENTED_EDGE('',*,*,#409413,.T.); +#409518 = ORIENTED_EDGE('',*,*,#409445,.T.); +#409519 = ORIENTED_EDGE('',*,*,#409477,.T.); +#409520 = ORIENTED_EDGE('',*,*,#409500,.T.); +#409521 = PLANE('',#409522); +#409522 = AXIS2_PLACEMENT_3D('',#409523,#409524,#409525); +#409523 = CARTESIAN_POINT('',(0.,0.,0.)); +#409524 = DIRECTION('',(-0.,-0.,-1.)); +#409525 = DIRECTION('',(-1.,0.,0.)); +#409526 = ADVANCED_FACE('',(#409527),#409537,.T.); +#409527 = FACE_BOUND('',#409528,.T.); +#409528 = EDGE_LOOP('',(#409529,#409530,#409531,#409532,#409533,#409534, + #409535,#409536)); +#409529 = ORIENTED_EDGE('',*,*,#409268,.T.); +#409530 = ORIENTED_EDGE('',*,*,#409301,.T.); +#409531 = ORIENTED_EDGE('',*,*,#409332,.T.); +#409532 = ORIENTED_EDGE('',*,*,#409365,.T.); +#409533 = ORIENTED_EDGE('',*,*,#409396,.T.); +#409534 = ORIENTED_EDGE('',*,*,#409429,.T.); +#409535 = ORIENTED_EDGE('',*,*,#409460,.T.); +#409536 = ORIENTED_EDGE('',*,*,#409493,.T.); +#409537 = PLANE('',#409538); +#409538 = AXIS2_PLACEMENT_3D('',#409539,#409540,#409541); +#409539 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#409540 = DIRECTION('',(-0.,-0.,-1.)); +#409541 = DIRECTION('',(-1.,0.,0.)); +#409542 = MANIFOLD_SOLID_BREP('',#409543); +#409543 = CLOSED_SHELL('',(#409544,#409586,#409617,#409650,#409681, + #409714,#409745,#409778,#409800,#409816)); +#409544 = ADVANCED_FACE('',(#409545),#409581,.T.); +#409545 = FACE_BOUND('',#409546,.F.); +#409546 = EDGE_LOOP('',(#409547,#409557,#409566,#409574)); +#409547 = ORIENTED_EDGE('',*,*,#409548,.T.); +#409548 = EDGE_CURVE('',#409549,#409551,#409553,.T.); +#409549 = VERTEX_POINT('',#409550); +#409550 = CARTESIAN_POINT('',(131.175,-109.4875,0.)); +#409551 = VERTEX_POINT('',#409552); +#409552 = CARTESIAN_POINT('',(131.175,-109.4875,-4.E-02)); +#409553 = LINE('',#409554,#409555); +#409554 = CARTESIAN_POINT('',(131.175,-109.4875,0.)); +#409555 = VECTOR('',#409556,1.); +#409556 = DIRECTION('',(0.,0.,-1.)); +#409557 = ORIENTED_EDGE('',*,*,#409558,.T.); +#409558 = EDGE_CURVE('',#409551,#409559,#409561,.T.); +#409559 = VERTEX_POINT('',#409560); +#409560 = CARTESIAN_POINT('',(131.325,-109.3375,-4.E-02)); +#409561 = CIRCLE('',#409562,0.150000058649); +#409562 = AXIS2_PLACEMENT_3D('',#409563,#409564,#409565); +#409563 = CARTESIAN_POINT('',(131.32500005864,-109.4875000586,-4.E-02)); +#409564 = DIRECTION('',(0.,0.,-1.)); +#409565 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#409566 = ORIENTED_EDGE('',*,*,#409567,.F.); +#409567 = EDGE_CURVE('',#409568,#409559,#409570,.T.); +#409568 = VERTEX_POINT('',#409569); +#409569 = CARTESIAN_POINT('',(131.325,-109.3375,0.)); +#409570 = LINE('',#409571,#409572); +#409571 = CARTESIAN_POINT('',(131.325,-109.3375,0.)); +#409572 = VECTOR('',#409573,1.); +#409573 = DIRECTION('',(0.,0.,-1.)); +#409574 = ORIENTED_EDGE('',*,*,#409575,.F.); +#409575 = EDGE_CURVE('',#409549,#409568,#409576,.T.); +#409576 = CIRCLE('',#409577,0.150000058649); +#409577 = AXIS2_PLACEMENT_3D('',#409578,#409579,#409580); +#409578 = CARTESIAN_POINT('',(131.32500005864,-109.4875000586,0.)); +#409579 = DIRECTION('',(0.,0.,-1.)); +#409580 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#409581 = CYLINDRICAL_SURFACE('',#409582,0.150000058649); +#409582 = AXIS2_PLACEMENT_3D('',#409583,#409584,#409585); +#409583 = CARTESIAN_POINT('',(131.32500005864,-109.4875000586,0.)); +#409584 = DIRECTION('',(-0.,-0.,1.)); +#409585 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#409586 = ADVANCED_FACE('',(#409587),#409612,.F.); +#409587 = FACE_BOUND('',#409588,.F.); +#409588 = EDGE_LOOP('',(#409589,#409590,#409598,#409606)); +#409589 = ORIENTED_EDGE('',*,*,#409567,.T.); +#409590 = ORIENTED_EDGE('',*,*,#409591,.T.); +#409591 = EDGE_CURVE('',#409559,#409592,#409594,.T.); +#409592 = VERTEX_POINT('',#409593); +#409593 = CARTESIAN_POINT('',(131.625,-109.3375,-4.E-02)); +#409594 = LINE('',#409595,#409596); +#409595 = CARTESIAN_POINT('',(131.325,-109.3375,-4.E-02)); +#409596 = VECTOR('',#409597,1.); +#409597 = DIRECTION('',(1.,0.,0.)); +#409598 = ORIENTED_EDGE('',*,*,#409599,.F.); +#409599 = EDGE_CURVE('',#409600,#409592,#409602,.T.); +#409600 = VERTEX_POINT('',#409601); +#409601 = CARTESIAN_POINT('',(131.625,-109.3375,0.)); +#409602 = LINE('',#409603,#409604); +#409603 = CARTESIAN_POINT('',(131.625,-109.3375,0.)); +#409604 = VECTOR('',#409605,1.); +#409605 = DIRECTION('',(0.,0.,-1.)); +#409606 = ORIENTED_EDGE('',*,*,#409607,.F.); +#409607 = EDGE_CURVE('',#409568,#409600,#409608,.T.); +#409608 = LINE('',#409609,#409610); +#409609 = CARTESIAN_POINT('',(131.325,-109.3375,0.)); +#409610 = VECTOR('',#409611,1.); +#409611 = DIRECTION('',(1.,0.,0.)); +#409612 = PLANE('',#409613); +#409613 = AXIS2_PLACEMENT_3D('',#409614,#409615,#409616); +#409614 = CARTESIAN_POINT('',(131.325,-109.3375,0.)); +#409615 = DIRECTION('',(0.,-1.,0.)); +#409616 = DIRECTION('',(1.,0.,0.)); +#409617 = ADVANCED_FACE('',(#409618),#409645,.T.); +#409618 = FACE_BOUND('',#409619,.F.); +#409619 = EDGE_LOOP('',(#409620,#409621,#409630,#409638)); +#409620 = ORIENTED_EDGE('',*,*,#409599,.T.); +#409621 = ORIENTED_EDGE('',*,*,#409622,.T.); +#409622 = EDGE_CURVE('',#409592,#409623,#409625,.T.); +#409623 = VERTEX_POINT('',#409624); +#409624 = CARTESIAN_POINT('',(131.775,-109.4875,-4.E-02)); +#409625 = CIRCLE('',#409626,0.150000058649); +#409626 = AXIS2_PLACEMENT_3D('',#409627,#409628,#409629); +#409627 = CARTESIAN_POINT('',(131.62499994135,-109.4875000586,-4.E-02)); +#409628 = DIRECTION('',(0.,0.,-1.)); +#409629 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#409630 = ORIENTED_EDGE('',*,*,#409631,.F.); +#409631 = EDGE_CURVE('',#409632,#409623,#409634,.T.); +#409632 = VERTEX_POINT('',#409633); +#409633 = CARTESIAN_POINT('',(131.775,-109.4875,0.)); +#409634 = LINE('',#409635,#409636); +#409635 = CARTESIAN_POINT('',(131.775,-109.4875,0.)); +#409636 = VECTOR('',#409637,1.); +#409637 = DIRECTION('',(0.,0.,-1.)); +#409638 = ORIENTED_EDGE('',*,*,#409639,.F.); +#409639 = EDGE_CURVE('',#409600,#409632,#409640,.T.); +#409640 = CIRCLE('',#409641,0.150000058649); +#409641 = AXIS2_PLACEMENT_3D('',#409642,#409643,#409644); +#409642 = CARTESIAN_POINT('',(131.62499994135,-109.4875000586,0.)); +#409643 = DIRECTION('',(0.,0.,-1.)); +#409644 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#409645 = CYLINDRICAL_SURFACE('',#409646,0.150000058649); +#409646 = AXIS2_PLACEMENT_3D('',#409647,#409648,#409649); +#409647 = CARTESIAN_POINT('',(131.62499994135,-109.4875000586,0.)); +#409648 = DIRECTION('',(-0.,-0.,1.)); +#409649 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#409650 = ADVANCED_FACE('',(#409651),#409676,.F.); +#409651 = FACE_BOUND('',#409652,.F.); +#409652 = EDGE_LOOP('',(#409653,#409654,#409662,#409670)); +#409653 = ORIENTED_EDGE('',*,*,#409631,.T.); +#409654 = ORIENTED_EDGE('',*,*,#409655,.T.); +#409655 = EDGE_CURVE('',#409623,#409656,#409658,.T.); +#409656 = VERTEX_POINT('',#409657); +#409657 = CARTESIAN_POINT('',(131.775,-110.5125,-4.E-02)); +#409658 = LINE('',#409659,#409660); +#409659 = CARTESIAN_POINT('',(131.775,-109.4875,-4.E-02)); +#409660 = VECTOR('',#409661,1.); +#409661 = DIRECTION('',(0.,-1.,0.)); +#409662 = ORIENTED_EDGE('',*,*,#409663,.F.); +#409663 = EDGE_CURVE('',#409664,#409656,#409666,.T.); +#409664 = VERTEX_POINT('',#409665); +#409665 = CARTESIAN_POINT('',(131.775,-110.5125,0.)); +#409666 = LINE('',#409667,#409668); +#409667 = CARTESIAN_POINT('',(131.775,-110.5125,0.)); +#409668 = VECTOR('',#409669,1.); +#409669 = DIRECTION('',(0.,0.,-1.)); +#409670 = ORIENTED_EDGE('',*,*,#409671,.F.); +#409671 = EDGE_CURVE('',#409632,#409664,#409672,.T.); +#409672 = LINE('',#409673,#409674); +#409673 = CARTESIAN_POINT('',(131.775,-109.4875,0.)); +#409674 = VECTOR('',#409675,1.); +#409675 = DIRECTION('',(0.,-1.,0.)); +#409676 = PLANE('',#409677); +#409677 = AXIS2_PLACEMENT_3D('',#409678,#409679,#409680); +#409678 = CARTESIAN_POINT('',(131.775,-109.4875,0.)); +#409679 = DIRECTION('',(-1.,-0.,-0.)); +#409680 = DIRECTION('',(0.,-1.,0.)); +#409681 = ADVANCED_FACE('',(#409682),#409709,.T.); +#409682 = FACE_BOUND('',#409683,.F.); +#409683 = EDGE_LOOP('',(#409684,#409685,#409694,#409702)); +#409684 = ORIENTED_EDGE('',*,*,#409663,.T.); +#409685 = ORIENTED_EDGE('',*,*,#409686,.T.); +#409686 = EDGE_CURVE('',#409656,#409687,#409689,.T.); +#409687 = VERTEX_POINT('',#409688); +#409688 = CARTESIAN_POINT('',(131.625,-110.6625,-4.E-02)); +#409689 = CIRCLE('',#409690,0.150000058649); +#409690 = AXIS2_PLACEMENT_3D('',#409691,#409692,#409693); +#409691 = CARTESIAN_POINT('',(131.62499994135,-110.5124999413,-4.E-02)); +#409692 = DIRECTION('',(0.,0.,-1.)); +#409693 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#409694 = ORIENTED_EDGE('',*,*,#409695,.F.); +#409695 = EDGE_CURVE('',#409696,#409687,#409698,.T.); +#409696 = VERTEX_POINT('',#409697); +#409697 = CARTESIAN_POINT('',(131.625,-110.6625,0.)); +#409698 = LINE('',#409699,#409700); +#409699 = CARTESIAN_POINT('',(131.625,-110.6625,0.)); +#409700 = VECTOR('',#409701,1.); +#409701 = DIRECTION('',(0.,0.,-1.)); +#409702 = ORIENTED_EDGE('',*,*,#409703,.F.); +#409703 = EDGE_CURVE('',#409664,#409696,#409704,.T.); +#409704 = CIRCLE('',#409705,0.150000058649); +#409705 = AXIS2_PLACEMENT_3D('',#409706,#409707,#409708); +#409706 = CARTESIAN_POINT('',(131.62499994135,-110.5124999413,0.)); +#409707 = DIRECTION('',(0.,0.,-1.)); +#409708 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#409709 = CYLINDRICAL_SURFACE('',#409710,0.150000058649); +#409710 = AXIS2_PLACEMENT_3D('',#409711,#409712,#409713); +#409711 = CARTESIAN_POINT('',(131.62499994135,-110.5124999413,0.)); +#409712 = DIRECTION('',(-0.,-0.,1.)); +#409713 = DIRECTION('',(1.,-3.909955037149E-07,0.)); +#409714 = ADVANCED_FACE('',(#409715),#409740,.F.); +#409715 = FACE_BOUND('',#409716,.F.); +#409716 = EDGE_LOOP('',(#409717,#409718,#409726,#409734)); +#409717 = ORIENTED_EDGE('',*,*,#409695,.T.); +#409718 = ORIENTED_EDGE('',*,*,#409719,.T.); +#409719 = EDGE_CURVE('',#409687,#409720,#409722,.T.); +#409720 = VERTEX_POINT('',#409721); +#409721 = CARTESIAN_POINT('',(131.325,-110.6625,-4.E-02)); +#409722 = LINE('',#409723,#409724); +#409723 = CARTESIAN_POINT('',(131.625,-110.6625,-4.E-02)); +#409724 = VECTOR('',#409725,1.); +#409725 = DIRECTION('',(-1.,0.,0.)); +#409726 = ORIENTED_EDGE('',*,*,#409727,.F.); +#409727 = EDGE_CURVE('',#409728,#409720,#409730,.T.); +#409728 = VERTEX_POINT('',#409729); +#409729 = CARTESIAN_POINT('',(131.325,-110.6625,0.)); +#409730 = LINE('',#409731,#409732); +#409731 = CARTESIAN_POINT('',(131.325,-110.6625,0.)); +#409732 = VECTOR('',#409733,1.); +#409733 = DIRECTION('',(0.,0.,-1.)); +#409734 = ORIENTED_EDGE('',*,*,#409735,.F.); +#409735 = EDGE_CURVE('',#409696,#409728,#409736,.T.); +#409736 = LINE('',#409737,#409738); +#409737 = CARTESIAN_POINT('',(131.625,-110.6625,0.)); +#409738 = VECTOR('',#409739,1.); +#409739 = DIRECTION('',(-1.,0.,0.)); +#409740 = PLANE('',#409741); +#409741 = AXIS2_PLACEMENT_3D('',#409742,#409743,#409744); +#409742 = CARTESIAN_POINT('',(131.625,-110.6625,0.)); +#409743 = DIRECTION('',(0.,1.,0.)); +#409744 = DIRECTION('',(-1.,0.,0.)); +#409745 = ADVANCED_FACE('',(#409746),#409773,.T.); +#409746 = FACE_BOUND('',#409747,.F.); +#409747 = EDGE_LOOP('',(#409748,#409749,#409758,#409766)); +#409748 = ORIENTED_EDGE('',*,*,#409727,.T.); +#409749 = ORIENTED_EDGE('',*,*,#409750,.T.); +#409750 = EDGE_CURVE('',#409720,#409751,#409753,.T.); +#409751 = VERTEX_POINT('',#409752); +#409752 = CARTESIAN_POINT('',(131.175,-110.5125,-4.E-02)); +#409753 = CIRCLE('',#409754,0.150000058649); +#409754 = AXIS2_PLACEMENT_3D('',#409755,#409756,#409757); +#409755 = CARTESIAN_POINT('',(131.32500005864,-110.5124999413,-4.E-02)); +#409756 = DIRECTION('',(0.,0.,-1.)); +#409757 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#409758 = ORIENTED_EDGE('',*,*,#409759,.F.); +#409759 = EDGE_CURVE('',#409760,#409751,#409762,.T.); +#409760 = VERTEX_POINT('',#409761); +#409761 = CARTESIAN_POINT('',(131.175,-110.5125,0.)); +#409762 = LINE('',#409763,#409764); +#409763 = CARTESIAN_POINT('',(131.175,-110.5125,0.)); +#409764 = VECTOR('',#409765,1.); +#409765 = DIRECTION('',(0.,0.,-1.)); +#409766 = ORIENTED_EDGE('',*,*,#409767,.F.); +#409767 = EDGE_CURVE('',#409728,#409760,#409768,.T.); +#409768 = CIRCLE('',#409769,0.150000058649); +#409769 = AXIS2_PLACEMENT_3D('',#409770,#409771,#409772); +#409770 = CARTESIAN_POINT('',(131.32500005864,-110.5124999413,0.)); +#409771 = DIRECTION('',(0.,0.,-1.)); +#409772 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#409773 = CYLINDRICAL_SURFACE('',#409774,0.150000058649); +#409774 = AXIS2_PLACEMENT_3D('',#409775,#409776,#409777); +#409775 = CARTESIAN_POINT('',(131.32500005864,-110.5124999413,0.)); +#409776 = DIRECTION('',(-0.,-0.,1.)); +#409777 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#409778 = ADVANCED_FACE('',(#409779),#409795,.F.); +#409779 = FACE_BOUND('',#409780,.F.); +#409780 = EDGE_LOOP('',(#409781,#409782,#409788,#409789)); +#409781 = ORIENTED_EDGE('',*,*,#409759,.T.); +#409782 = ORIENTED_EDGE('',*,*,#409783,.T.); +#409783 = EDGE_CURVE('',#409751,#409551,#409784,.T.); +#409784 = LINE('',#409785,#409786); +#409785 = CARTESIAN_POINT('',(131.175,-110.5125,-4.E-02)); +#409786 = VECTOR('',#409787,1.); +#409787 = DIRECTION('',(0.,1.,0.)); +#409788 = ORIENTED_EDGE('',*,*,#409548,.F.); +#409789 = ORIENTED_EDGE('',*,*,#409790,.F.); +#409790 = EDGE_CURVE('',#409760,#409549,#409791,.T.); +#409791 = LINE('',#409792,#409793); +#409792 = CARTESIAN_POINT('',(131.175,-110.5125,0.)); +#409793 = VECTOR('',#409794,1.); +#409794 = DIRECTION('',(0.,1.,0.)); +#409795 = PLANE('',#409796); +#409796 = AXIS2_PLACEMENT_3D('',#409797,#409798,#409799); +#409797 = CARTESIAN_POINT('',(131.175,-110.5125,0.)); +#409798 = DIRECTION('',(1.,-0.,0.)); +#409799 = DIRECTION('',(0.,1.,0.)); +#409800 = ADVANCED_FACE('',(#409801),#409811,.F.); +#409801 = FACE_BOUND('',#409802,.F.); +#409802 = EDGE_LOOP('',(#409803,#409804,#409805,#409806,#409807,#409808, + #409809,#409810)); +#409803 = ORIENTED_EDGE('',*,*,#409575,.T.); +#409804 = ORIENTED_EDGE('',*,*,#409607,.T.); +#409805 = ORIENTED_EDGE('',*,*,#409639,.T.); +#409806 = ORIENTED_EDGE('',*,*,#409671,.T.); +#409807 = ORIENTED_EDGE('',*,*,#409703,.T.); +#409808 = ORIENTED_EDGE('',*,*,#409735,.T.); +#409809 = ORIENTED_EDGE('',*,*,#409767,.T.); +#409810 = ORIENTED_EDGE('',*,*,#409790,.T.); +#409811 = PLANE('',#409812); +#409812 = AXIS2_PLACEMENT_3D('',#409813,#409814,#409815); +#409813 = CARTESIAN_POINT('',(0.,0.,0.)); +#409814 = DIRECTION('',(-0.,-0.,-1.)); +#409815 = DIRECTION('',(-1.,0.,0.)); +#409816 = ADVANCED_FACE('',(#409817),#409827,.T.); +#409817 = FACE_BOUND('',#409818,.T.); +#409818 = EDGE_LOOP('',(#409819,#409820,#409821,#409822,#409823,#409824, + #409825,#409826)); +#409819 = ORIENTED_EDGE('',*,*,#409558,.T.); +#409820 = ORIENTED_EDGE('',*,*,#409591,.T.); +#409821 = ORIENTED_EDGE('',*,*,#409622,.T.); +#409822 = ORIENTED_EDGE('',*,*,#409655,.T.); +#409823 = ORIENTED_EDGE('',*,*,#409686,.T.); +#409824 = ORIENTED_EDGE('',*,*,#409719,.T.); +#409825 = ORIENTED_EDGE('',*,*,#409750,.T.); +#409826 = ORIENTED_EDGE('',*,*,#409783,.T.); +#409827 = PLANE('',#409828); +#409828 = AXIS2_PLACEMENT_3D('',#409829,#409830,#409831); +#409829 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#409830 = DIRECTION('',(-0.,-0.,-1.)); +#409831 = DIRECTION('',(-1.,0.,0.)); +#409832 = MANIFOLD_SOLID_BREP('',#409833); +#409833 = CLOSED_SHELL('',(#409834,#409876,#409907,#409940,#409971, + #410004,#410035,#410068,#410090,#410106)); +#409834 = ADVANCED_FACE('',(#409835),#409871,.T.); +#409835 = FACE_BOUND('',#409836,.F.); +#409836 = EDGE_LOOP('',(#409837,#409847,#409856,#409864)); +#409837 = ORIENTED_EDGE('',*,*,#409838,.T.); +#409838 = EDGE_CURVE('',#409839,#409841,#409843,.T.); +#409839 = VERTEX_POINT('',#409840); +#409840 = CARTESIAN_POINT('',(138.49,-76.555,0.)); +#409841 = VERTEX_POINT('',#409842); +#409842 = CARTESIAN_POINT('',(138.49,-76.555,-4.E-02)); +#409843 = LINE('',#409844,#409845); +#409844 = CARTESIAN_POINT('',(138.49,-76.555,0.)); +#409845 = VECTOR('',#409846,1.); +#409846 = DIRECTION('',(0.,0.,-1.)); +#409847 = ORIENTED_EDGE('',*,*,#409848,.T.); +#409848 = EDGE_CURVE('',#409841,#409849,#409851,.T.); +#409849 = VERTEX_POINT('',#409850); +#409850 = CARTESIAN_POINT('',(138.63,-76.415,-4.E-02)); +#409851 = CIRCLE('',#409852,0.139999827125); +#409852 = AXIS2_PLACEMENT_3D('',#409853,#409854,#409855); +#409853 = CARTESIAN_POINT('',(138.62999982712,-76.55499982712,-4.E-02)); +#409854 = DIRECTION('',(0.,0.,-1.)); +#409855 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#409856 = ORIENTED_EDGE('',*,*,#409857,.F.); +#409857 = EDGE_CURVE('',#409858,#409849,#409860,.T.); +#409858 = VERTEX_POINT('',#409859); +#409859 = CARTESIAN_POINT('',(138.63,-76.415,0.)); +#409860 = LINE('',#409861,#409862); +#409861 = CARTESIAN_POINT('',(138.63,-76.415,0.)); +#409862 = VECTOR('',#409863,1.); +#409863 = DIRECTION('',(0.,0.,-1.)); +#409864 = ORIENTED_EDGE('',*,*,#409865,.F.); +#409865 = EDGE_CURVE('',#409839,#409858,#409866,.T.); +#409866 = CIRCLE('',#409867,0.139999827125); +#409867 = AXIS2_PLACEMENT_3D('',#409868,#409869,#409870); +#409868 = CARTESIAN_POINT('',(138.62999982712,-76.55499982712,0.)); +#409869 = DIRECTION('',(0.,0.,-1.)); +#409870 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#409871 = CYLINDRICAL_SURFACE('',#409872,0.139999827125); +#409872 = AXIS2_PLACEMENT_3D('',#409873,#409874,#409875); +#409873 = CARTESIAN_POINT('',(138.62999982712,-76.55499982712,0.)); +#409874 = DIRECTION('',(-0.,-0.,1.)); +#409875 = DIRECTION('',(-0.999999999999,-1.23482055276E-06,-0.)); +#409876 = ADVANCED_FACE('',(#409877),#409902,.F.); +#409877 = FACE_BOUND('',#409878,.F.); +#409878 = EDGE_LOOP('',(#409879,#409880,#409888,#409896)); +#409879 = ORIENTED_EDGE('',*,*,#409857,.T.); +#409880 = ORIENTED_EDGE('',*,*,#409881,.T.); +#409881 = EDGE_CURVE('',#409849,#409882,#409884,.T.); +#409882 = VERTEX_POINT('',#409883); +#409883 = CARTESIAN_POINT('',(138.97,-76.415,-4.E-02)); +#409884 = LINE('',#409885,#409886); +#409885 = CARTESIAN_POINT('',(138.63,-76.415,-4.E-02)); +#409886 = VECTOR('',#409887,1.); +#409887 = DIRECTION('',(1.,0.,0.)); +#409888 = ORIENTED_EDGE('',*,*,#409889,.F.); +#409889 = EDGE_CURVE('',#409890,#409882,#409892,.T.); +#409890 = VERTEX_POINT('',#409891); +#409891 = CARTESIAN_POINT('',(138.97,-76.415,0.)); +#409892 = LINE('',#409893,#409894); +#409893 = CARTESIAN_POINT('',(138.97,-76.415,0.)); +#409894 = VECTOR('',#409895,1.); +#409895 = DIRECTION('',(0.,0.,-1.)); +#409896 = ORIENTED_EDGE('',*,*,#409897,.F.); +#409897 = EDGE_CURVE('',#409858,#409890,#409898,.T.); +#409898 = LINE('',#409899,#409900); +#409899 = CARTESIAN_POINT('',(138.63,-76.415,0.)); +#409900 = VECTOR('',#409901,1.); +#409901 = DIRECTION('',(1.,0.,0.)); +#409902 = PLANE('',#409903); +#409903 = AXIS2_PLACEMENT_3D('',#409904,#409905,#409906); +#409904 = CARTESIAN_POINT('',(138.63,-76.415,0.)); +#409905 = DIRECTION('',(0.,-1.,0.)); +#409906 = DIRECTION('',(1.,0.,0.)); +#409907 = ADVANCED_FACE('',(#409908),#409935,.T.); +#409908 = FACE_BOUND('',#409909,.F.); +#409909 = EDGE_LOOP('',(#409910,#409911,#409920,#409928)); +#409910 = ORIENTED_EDGE('',*,*,#409889,.T.); +#409911 = ORIENTED_EDGE('',*,*,#409912,.T.); +#409912 = EDGE_CURVE('',#409882,#409913,#409915,.T.); +#409913 = VERTEX_POINT('',#409914); +#409914 = CARTESIAN_POINT('',(139.11,-76.555,-4.E-02)); +#409915 = CIRCLE('',#409916,0.139999827125); +#409916 = AXIS2_PLACEMENT_3D('',#409917,#409918,#409919); +#409917 = CARTESIAN_POINT('',(138.97000017287,-76.55499982712,-4.E-02)); +#409918 = DIRECTION('',(0.,0.,-1.)); +#409919 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#409920 = ORIENTED_EDGE('',*,*,#409921,.F.); +#409921 = EDGE_CURVE('',#409922,#409913,#409924,.T.); +#409922 = VERTEX_POINT('',#409923); +#409923 = CARTESIAN_POINT('',(139.11,-76.555,0.)); +#409924 = LINE('',#409925,#409926); +#409925 = CARTESIAN_POINT('',(139.11,-76.555,0.)); +#409926 = VECTOR('',#409927,1.); +#409927 = DIRECTION('',(0.,0.,-1.)); +#409928 = ORIENTED_EDGE('',*,*,#409929,.F.); +#409929 = EDGE_CURVE('',#409890,#409922,#409930,.T.); +#409930 = CIRCLE('',#409931,0.139999827125); +#409931 = AXIS2_PLACEMENT_3D('',#409932,#409933,#409934); +#409932 = CARTESIAN_POINT('',(138.97000017287,-76.55499982712,0.)); +#409933 = DIRECTION('',(0.,0.,-1.)); +#409934 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#409935 = CYLINDRICAL_SURFACE('',#409936,0.139999827125); +#409936 = AXIS2_PLACEMENT_3D('',#409937,#409938,#409939); +#409937 = CARTESIAN_POINT('',(138.97000017287,-76.55499982712,0.)); +#409938 = DIRECTION('',(-0.,-0.,1.)); +#409939 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#409940 = ADVANCED_FACE('',(#409941),#409966,.F.); +#409941 = FACE_BOUND('',#409942,.F.); +#409942 = EDGE_LOOP('',(#409943,#409944,#409952,#409960)); +#409943 = ORIENTED_EDGE('',*,*,#409921,.T.); +#409944 = ORIENTED_EDGE('',*,*,#409945,.T.); +#409945 = EDGE_CURVE('',#409913,#409946,#409948,.T.); +#409946 = VERTEX_POINT('',#409947); +#409947 = CARTESIAN_POINT('',(139.11,-76.835,-4.E-02)); +#409948 = LINE('',#409949,#409950); +#409949 = CARTESIAN_POINT('',(139.11,-76.555,-4.E-02)); +#409950 = VECTOR('',#409951,1.); +#409951 = DIRECTION('',(0.,-1.,0.)); +#409952 = ORIENTED_EDGE('',*,*,#409953,.F.); +#409953 = EDGE_CURVE('',#409954,#409946,#409956,.T.); +#409954 = VERTEX_POINT('',#409955); +#409955 = CARTESIAN_POINT('',(139.11,-76.835,0.)); +#409956 = LINE('',#409957,#409958); +#409957 = CARTESIAN_POINT('',(139.11,-76.835,0.)); +#409958 = VECTOR('',#409959,1.); +#409959 = DIRECTION('',(0.,0.,-1.)); +#409960 = ORIENTED_EDGE('',*,*,#409961,.F.); +#409961 = EDGE_CURVE('',#409922,#409954,#409962,.T.); +#409962 = LINE('',#409963,#409964); +#409963 = CARTESIAN_POINT('',(139.11,-76.555,0.)); +#409964 = VECTOR('',#409965,1.); +#409965 = DIRECTION('',(0.,-1.,0.)); +#409966 = PLANE('',#409967); +#409967 = AXIS2_PLACEMENT_3D('',#409968,#409969,#409970); +#409968 = CARTESIAN_POINT('',(139.11,-76.555,0.)); +#409969 = DIRECTION('',(-1.,-0.,-0.)); +#409970 = DIRECTION('',(0.,-1.,0.)); +#409971 = ADVANCED_FACE('',(#409972),#409999,.T.); +#409972 = FACE_BOUND('',#409973,.F.); +#409973 = EDGE_LOOP('',(#409974,#409975,#409984,#409992)); +#409974 = ORIENTED_EDGE('',*,*,#409953,.T.); +#409975 = ORIENTED_EDGE('',*,*,#409976,.T.); +#409976 = EDGE_CURVE('',#409946,#409977,#409979,.T.); +#409977 = VERTEX_POINT('',#409978); +#409978 = CARTESIAN_POINT('',(138.97,-76.975,-4.E-02)); +#409979 = CIRCLE('',#409980,0.139999827125); +#409980 = AXIS2_PLACEMENT_3D('',#409981,#409982,#409983); +#409981 = CARTESIAN_POINT('',(138.97000017287,-76.83500017287,-4.E-02)); +#409982 = DIRECTION('',(0.,0.,-1.)); +#409983 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#409984 = ORIENTED_EDGE('',*,*,#409985,.F.); +#409985 = EDGE_CURVE('',#409986,#409977,#409988,.T.); +#409986 = VERTEX_POINT('',#409987); +#409987 = CARTESIAN_POINT('',(138.97,-76.975,0.)); +#409988 = LINE('',#409989,#409990); +#409989 = CARTESIAN_POINT('',(138.97,-76.975,0.)); +#409990 = VECTOR('',#409991,1.); +#409991 = DIRECTION('',(0.,0.,-1.)); +#409992 = ORIENTED_EDGE('',*,*,#409993,.F.); +#409993 = EDGE_CURVE('',#409954,#409986,#409994,.T.); +#409994 = CIRCLE('',#409995,0.139999827125); +#409995 = AXIS2_PLACEMENT_3D('',#409996,#409997,#409998); +#409996 = CARTESIAN_POINT('',(138.97000017287,-76.83500017287,0.)); +#409997 = DIRECTION('',(0.,0.,-1.)); +#409998 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#409999 = CYLINDRICAL_SURFACE('',#410000,0.139999827125); +#410000 = AXIS2_PLACEMENT_3D('',#410001,#410002,#410003); +#410001 = CARTESIAN_POINT('',(138.97000017287,-76.83500017287,0.)); +#410002 = DIRECTION('',(-0.,-0.,1.)); +#410003 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#410004 = ADVANCED_FACE('',(#410005),#410030,.F.); +#410005 = FACE_BOUND('',#410006,.F.); +#410006 = EDGE_LOOP('',(#410007,#410008,#410016,#410024)); +#410007 = ORIENTED_EDGE('',*,*,#409985,.T.); +#410008 = ORIENTED_EDGE('',*,*,#410009,.T.); +#410009 = EDGE_CURVE('',#409977,#410010,#410012,.T.); +#410010 = VERTEX_POINT('',#410011); +#410011 = CARTESIAN_POINT('',(138.63,-76.975,-4.E-02)); +#410012 = LINE('',#410013,#410014); +#410013 = CARTESIAN_POINT('',(138.97,-76.975,-4.E-02)); +#410014 = VECTOR('',#410015,1.); +#410015 = DIRECTION('',(-1.,0.,0.)); +#410016 = ORIENTED_EDGE('',*,*,#410017,.F.); +#410017 = EDGE_CURVE('',#410018,#410010,#410020,.T.); +#410018 = VERTEX_POINT('',#410019); +#410019 = CARTESIAN_POINT('',(138.63,-76.975,0.)); +#410020 = LINE('',#410021,#410022); +#410021 = CARTESIAN_POINT('',(138.63,-76.975,0.)); +#410022 = VECTOR('',#410023,1.); +#410023 = DIRECTION('',(0.,0.,-1.)); +#410024 = ORIENTED_EDGE('',*,*,#410025,.F.); +#410025 = EDGE_CURVE('',#409986,#410018,#410026,.T.); +#410026 = LINE('',#410027,#410028); +#410027 = CARTESIAN_POINT('',(138.97,-76.975,0.)); +#410028 = VECTOR('',#410029,1.); +#410029 = DIRECTION('',(-1.,0.,0.)); +#410030 = PLANE('',#410031); +#410031 = AXIS2_PLACEMENT_3D('',#410032,#410033,#410034); +#410032 = CARTESIAN_POINT('',(138.97,-76.975,0.)); +#410033 = DIRECTION('',(0.,1.,0.)); +#410034 = DIRECTION('',(-1.,0.,0.)); +#410035 = ADVANCED_FACE('',(#410036),#410063,.T.); +#410036 = FACE_BOUND('',#410037,.F.); +#410037 = EDGE_LOOP('',(#410038,#410039,#410048,#410056)); +#410038 = ORIENTED_EDGE('',*,*,#410017,.T.); +#410039 = ORIENTED_EDGE('',*,*,#410040,.T.); +#410040 = EDGE_CURVE('',#410010,#410041,#410043,.T.); +#410041 = VERTEX_POINT('',#410042); +#410042 = CARTESIAN_POINT('',(138.49,-76.835,-4.E-02)); +#410043 = CIRCLE('',#410044,0.139999827125); +#410044 = AXIS2_PLACEMENT_3D('',#410045,#410046,#410047); +#410045 = CARTESIAN_POINT('',(138.62999982712,-76.83500017287,-4.E-02)); +#410046 = DIRECTION('',(0.,0.,-1.)); +#410047 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#410048 = ORIENTED_EDGE('',*,*,#410049,.F.); +#410049 = EDGE_CURVE('',#410050,#410041,#410052,.T.); +#410050 = VERTEX_POINT('',#410051); +#410051 = CARTESIAN_POINT('',(138.49,-76.835,0.)); +#410052 = LINE('',#410053,#410054); +#410053 = CARTESIAN_POINT('',(138.49,-76.835,0.)); +#410054 = VECTOR('',#410055,1.); +#410055 = DIRECTION('',(0.,0.,-1.)); +#410056 = ORIENTED_EDGE('',*,*,#410057,.F.); +#410057 = EDGE_CURVE('',#410018,#410050,#410058,.T.); +#410058 = CIRCLE('',#410059,0.139999827125); +#410059 = AXIS2_PLACEMENT_3D('',#410060,#410061,#410062); +#410060 = CARTESIAN_POINT('',(138.62999982712,-76.83500017287,0.)); +#410061 = DIRECTION('',(0.,0.,-1.)); +#410062 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#410063 = CYLINDRICAL_SURFACE('',#410064,0.139999827125); +#410064 = AXIS2_PLACEMENT_3D('',#410065,#410066,#410067); +#410065 = CARTESIAN_POINT('',(138.62999982712,-76.83500017287,0.)); +#410066 = DIRECTION('',(-0.,-0.,1.)); +#410067 = DIRECTION('',(1.234820451254E-06,-0.999999999999,0.)); +#410068 = ADVANCED_FACE('',(#410069),#410085,.F.); +#410069 = FACE_BOUND('',#410070,.F.); +#410070 = EDGE_LOOP('',(#410071,#410072,#410078,#410079)); +#410071 = ORIENTED_EDGE('',*,*,#410049,.T.); +#410072 = ORIENTED_EDGE('',*,*,#410073,.T.); +#410073 = EDGE_CURVE('',#410041,#409841,#410074,.T.); +#410074 = LINE('',#410075,#410076); +#410075 = CARTESIAN_POINT('',(138.49,-76.835,-4.E-02)); +#410076 = VECTOR('',#410077,1.); +#410077 = DIRECTION('',(0.,1.,0.)); +#410078 = ORIENTED_EDGE('',*,*,#409838,.F.); +#410079 = ORIENTED_EDGE('',*,*,#410080,.F.); +#410080 = EDGE_CURVE('',#410050,#409839,#410081,.T.); +#410081 = LINE('',#410082,#410083); +#410082 = CARTESIAN_POINT('',(138.49,-76.835,0.)); +#410083 = VECTOR('',#410084,1.); +#410084 = DIRECTION('',(0.,1.,0.)); +#410085 = PLANE('',#410086); +#410086 = AXIS2_PLACEMENT_3D('',#410087,#410088,#410089); +#410087 = CARTESIAN_POINT('',(138.49,-76.835,0.)); +#410088 = DIRECTION('',(1.,-0.,0.)); +#410089 = DIRECTION('',(0.,1.,0.)); +#410090 = ADVANCED_FACE('',(#410091),#410101,.F.); +#410091 = FACE_BOUND('',#410092,.F.); +#410092 = EDGE_LOOP('',(#410093,#410094,#410095,#410096,#410097,#410098, + #410099,#410100)); +#410093 = ORIENTED_EDGE('',*,*,#409865,.T.); +#410094 = ORIENTED_EDGE('',*,*,#409897,.T.); +#410095 = ORIENTED_EDGE('',*,*,#409929,.T.); +#410096 = ORIENTED_EDGE('',*,*,#409961,.T.); +#410097 = ORIENTED_EDGE('',*,*,#409993,.T.); +#410098 = ORIENTED_EDGE('',*,*,#410025,.T.); +#410099 = ORIENTED_EDGE('',*,*,#410057,.T.); +#410100 = ORIENTED_EDGE('',*,*,#410080,.T.); +#410101 = PLANE('',#410102); +#410102 = AXIS2_PLACEMENT_3D('',#410103,#410104,#410105); +#410103 = CARTESIAN_POINT('',(0.,0.,0.)); +#410104 = DIRECTION('',(-0.,-0.,-1.)); +#410105 = DIRECTION('',(-1.,0.,0.)); +#410106 = ADVANCED_FACE('',(#410107),#410117,.T.); +#410107 = FACE_BOUND('',#410108,.T.); +#410108 = EDGE_LOOP('',(#410109,#410110,#410111,#410112,#410113,#410114, + #410115,#410116)); +#410109 = ORIENTED_EDGE('',*,*,#409848,.T.); +#410110 = ORIENTED_EDGE('',*,*,#409881,.T.); +#410111 = ORIENTED_EDGE('',*,*,#409912,.T.); +#410112 = ORIENTED_EDGE('',*,*,#409945,.T.); +#410113 = ORIENTED_EDGE('',*,*,#409976,.T.); +#410114 = ORIENTED_EDGE('',*,*,#410009,.T.); +#410115 = ORIENTED_EDGE('',*,*,#410040,.T.); +#410116 = ORIENTED_EDGE('',*,*,#410073,.T.); +#410117 = PLANE('',#410118); +#410118 = AXIS2_PLACEMENT_3D('',#410119,#410120,#410121); +#410119 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#410120 = DIRECTION('',(-0.,-0.,-1.)); +#410121 = DIRECTION('',(-1.,0.,0.)); +#410122 = MANIFOLD_SOLID_BREP('',#410123); +#410123 = CLOSED_SHELL('',(#410124,#410166,#410197,#410230,#410261, + #410294,#410325,#410358,#410380,#410396)); +#410124 = ADVANCED_FACE('',(#410125),#410161,.T.); +#410125 = FACE_BOUND('',#410126,.F.); +#410126 = EDGE_LOOP('',(#410127,#410137,#410146,#410154)); +#410127 = ORIENTED_EDGE('',*,*,#410128,.T.); +#410128 = EDGE_CURVE('',#410129,#410131,#410133,.T.); +#410129 = VERTEX_POINT('',#410130); +#410130 = CARTESIAN_POINT('',(138.0375,-71.,0.)); +#410131 = VERTEX_POINT('',#410132); +#410132 = CARTESIAN_POINT('',(138.0375,-71.,-4.E-02)); +#410133 = LINE('',#410134,#410135); +#410134 = CARTESIAN_POINT('',(138.0375,-71.,0.)); +#410135 = VECTOR('',#410136,1.); +#410136 = DIRECTION('',(0.,0.,-1.)); +#410137 = ORIENTED_EDGE('',*,*,#410138,.T.); +#410138 = EDGE_CURVE('',#410131,#410139,#410141,.T.); +#410139 = VERTEX_POINT('',#410140); +#410140 = CARTESIAN_POINT('',(138.1875,-70.85,-4.E-02)); +#410141 = CIRCLE('',#410142,0.150000058649); +#410142 = AXIS2_PLACEMENT_3D('',#410143,#410144,#410145); +#410143 = CARTESIAN_POINT('',(138.18750005864,-71.00000005864,-4.E-02)); +#410144 = DIRECTION('',(0.,0.,-1.)); +#410145 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#410146 = ORIENTED_EDGE('',*,*,#410147,.F.); +#410147 = EDGE_CURVE('',#410148,#410139,#410150,.T.); +#410148 = VERTEX_POINT('',#410149); +#410149 = CARTESIAN_POINT('',(138.1875,-70.85,0.)); +#410150 = LINE('',#410151,#410152); +#410151 = CARTESIAN_POINT('',(138.1875,-70.85,0.)); +#410152 = VECTOR('',#410153,1.); +#410153 = DIRECTION('',(0.,0.,-1.)); +#410154 = ORIENTED_EDGE('',*,*,#410155,.F.); +#410155 = EDGE_CURVE('',#410129,#410148,#410156,.T.); +#410156 = CIRCLE('',#410157,0.150000058649); +#410157 = AXIS2_PLACEMENT_3D('',#410158,#410159,#410160); +#410158 = CARTESIAN_POINT('',(138.18750005864,-71.00000005864,0.)); +#410159 = DIRECTION('',(0.,0.,-1.)); +#410160 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#410161 = CYLINDRICAL_SURFACE('',#410162,0.150000058649); +#410162 = AXIS2_PLACEMENT_3D('',#410163,#410164,#410165); +#410163 = CARTESIAN_POINT('',(138.18750005864,-71.00000005864,0.)); +#410164 = DIRECTION('',(-0.,-0.,1.)); +#410165 = DIRECTION('',(-1.,3.909955037148E-07,0.)); +#410166 = ADVANCED_FACE('',(#410167),#410192,.F.); +#410167 = FACE_BOUND('',#410168,.F.); +#410168 = EDGE_LOOP('',(#410169,#410170,#410178,#410186)); +#410169 = ORIENTED_EDGE('',*,*,#410147,.T.); +#410170 = ORIENTED_EDGE('',*,*,#410171,.T.); +#410171 = EDGE_CURVE('',#410139,#410172,#410174,.T.); +#410172 = VERTEX_POINT('',#410173); +#410173 = CARTESIAN_POINT('',(139.3625,-70.85,-4.E-02)); +#410174 = LINE('',#410175,#410176); +#410175 = CARTESIAN_POINT('',(138.1875,-70.85,-4.E-02)); +#410176 = VECTOR('',#410177,1.); +#410177 = DIRECTION('',(1.,0.,0.)); +#410178 = ORIENTED_EDGE('',*,*,#410179,.F.); +#410179 = EDGE_CURVE('',#410180,#410172,#410182,.T.); +#410180 = VERTEX_POINT('',#410181); +#410181 = CARTESIAN_POINT('',(139.3625,-70.85,0.)); +#410182 = LINE('',#410183,#410184); +#410183 = CARTESIAN_POINT('',(139.3625,-70.85,0.)); +#410184 = VECTOR('',#410185,1.); +#410185 = DIRECTION('',(0.,0.,-1.)); +#410186 = ORIENTED_EDGE('',*,*,#410187,.F.); +#410187 = EDGE_CURVE('',#410148,#410180,#410188,.T.); +#410188 = LINE('',#410189,#410190); +#410189 = CARTESIAN_POINT('',(138.1875,-70.85,0.)); +#410190 = VECTOR('',#410191,1.); +#410191 = DIRECTION('',(1.,0.,0.)); +#410192 = PLANE('',#410193); +#410193 = AXIS2_PLACEMENT_3D('',#410194,#410195,#410196); +#410194 = CARTESIAN_POINT('',(138.1875,-70.85,0.)); +#410195 = DIRECTION('',(0.,-1.,0.)); +#410196 = DIRECTION('',(1.,0.,0.)); +#410197 = ADVANCED_FACE('',(#410198),#410225,.T.); +#410198 = FACE_BOUND('',#410199,.F.); +#410199 = EDGE_LOOP('',(#410200,#410201,#410210,#410218)); +#410200 = ORIENTED_EDGE('',*,*,#410179,.T.); +#410201 = ORIENTED_EDGE('',*,*,#410202,.T.); +#410202 = EDGE_CURVE('',#410172,#410203,#410205,.T.); +#410203 = VERTEX_POINT('',#410204); +#410204 = CARTESIAN_POINT('',(139.5125,-71.,-4.E-02)); +#410205 = CIRCLE('',#410206,0.150000058649); +#410206 = AXIS2_PLACEMENT_3D('',#410207,#410208,#410209); +#410207 = CARTESIAN_POINT('',(139.36249994135,-71.00000005864,-4.E-02)); +#410208 = DIRECTION('',(0.,0.,-1.)); +#410209 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#410210 = ORIENTED_EDGE('',*,*,#410211,.F.); +#410211 = EDGE_CURVE('',#410212,#410203,#410214,.T.); +#410212 = VERTEX_POINT('',#410213); +#410213 = CARTESIAN_POINT('',(139.5125,-71.,0.)); +#410214 = LINE('',#410215,#410216); +#410215 = CARTESIAN_POINT('',(139.5125,-71.,0.)); +#410216 = VECTOR('',#410217,1.); +#410217 = DIRECTION('',(0.,0.,-1.)); +#410218 = ORIENTED_EDGE('',*,*,#410219,.F.); +#410219 = EDGE_CURVE('',#410180,#410212,#410220,.T.); +#410220 = CIRCLE('',#410221,0.150000058649); +#410221 = AXIS2_PLACEMENT_3D('',#410222,#410223,#410224); +#410222 = CARTESIAN_POINT('',(139.36249994135,-71.00000005864,0.)); +#410223 = DIRECTION('',(0.,0.,-1.)); +#410224 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#410225 = CYLINDRICAL_SURFACE('',#410226,0.150000058649); +#410226 = AXIS2_PLACEMENT_3D('',#410227,#410228,#410229); +#410227 = CARTESIAN_POINT('',(139.36249994135,-71.00000005864,0.)); +#410228 = DIRECTION('',(-0.,-0.,1.)); +#410229 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#410230 = ADVANCED_FACE('',(#410231),#410256,.F.); +#410231 = FACE_BOUND('',#410232,.F.); +#410232 = EDGE_LOOP('',(#410233,#410234,#410242,#410250)); +#410233 = ORIENTED_EDGE('',*,*,#410211,.T.); +#410234 = ORIENTED_EDGE('',*,*,#410235,.T.); +#410235 = EDGE_CURVE('',#410203,#410236,#410238,.T.); +#410236 = VERTEX_POINT('',#410237); +#410237 = CARTESIAN_POINT('',(139.5125,-71.3,-4.E-02)); +#410238 = LINE('',#410239,#410240); +#410239 = CARTESIAN_POINT('',(139.5125,-71.,-4.E-02)); +#410240 = VECTOR('',#410241,1.); +#410241 = DIRECTION('',(0.,-1.,0.)); +#410242 = ORIENTED_EDGE('',*,*,#410243,.F.); +#410243 = EDGE_CURVE('',#410244,#410236,#410246,.T.); +#410244 = VERTEX_POINT('',#410245); +#410245 = CARTESIAN_POINT('',(139.5125,-71.3,0.)); +#410246 = LINE('',#410247,#410248); +#410247 = CARTESIAN_POINT('',(139.5125,-71.3,0.)); +#410248 = VECTOR('',#410249,1.); +#410249 = DIRECTION('',(0.,0.,-1.)); +#410250 = ORIENTED_EDGE('',*,*,#410251,.F.); +#410251 = EDGE_CURVE('',#410212,#410244,#410252,.T.); +#410252 = LINE('',#410253,#410254); +#410253 = CARTESIAN_POINT('',(139.5125,-71.,0.)); +#410254 = VECTOR('',#410255,1.); +#410255 = DIRECTION('',(0.,-1.,0.)); +#410256 = PLANE('',#410257); +#410257 = AXIS2_PLACEMENT_3D('',#410258,#410259,#410260); +#410258 = CARTESIAN_POINT('',(139.5125,-71.,0.)); +#410259 = DIRECTION('',(-1.,-0.,-0.)); +#410260 = DIRECTION('',(0.,-1.,0.)); +#410261 = ADVANCED_FACE('',(#410262),#410289,.T.); +#410262 = FACE_BOUND('',#410263,.F.); +#410263 = EDGE_LOOP('',(#410264,#410265,#410274,#410282)); +#410264 = ORIENTED_EDGE('',*,*,#410243,.T.); +#410265 = ORIENTED_EDGE('',*,*,#410266,.T.); +#410266 = EDGE_CURVE('',#410236,#410267,#410269,.T.); +#410267 = VERTEX_POINT('',#410268); +#410268 = CARTESIAN_POINT('',(139.3625,-71.45,-4.E-02)); +#410269 = CIRCLE('',#410270,0.150000058649); +#410270 = AXIS2_PLACEMENT_3D('',#410271,#410272,#410273); +#410271 = CARTESIAN_POINT('',(139.36249994135,-71.29999994135,-4.E-02)); +#410272 = DIRECTION('',(0.,0.,-1.)); +#410273 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#410274 = ORIENTED_EDGE('',*,*,#410275,.F.); +#410275 = EDGE_CURVE('',#410276,#410267,#410278,.T.); +#410276 = VERTEX_POINT('',#410277); +#410277 = CARTESIAN_POINT('',(139.3625,-71.45,0.)); +#410278 = LINE('',#410279,#410280); +#410279 = CARTESIAN_POINT('',(139.3625,-71.45,0.)); +#410280 = VECTOR('',#410281,1.); +#410281 = DIRECTION('',(0.,0.,-1.)); +#410282 = ORIENTED_EDGE('',*,*,#410283,.F.); +#410283 = EDGE_CURVE('',#410244,#410276,#410284,.T.); +#410284 = CIRCLE('',#410285,0.150000058649); +#410285 = AXIS2_PLACEMENT_3D('',#410286,#410287,#410288); +#410286 = CARTESIAN_POINT('',(139.36249994135,-71.29999994135,0.)); +#410287 = DIRECTION('',(0.,0.,-1.)); +#410288 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#410289 = CYLINDRICAL_SURFACE('',#410290,0.150000058649); +#410290 = AXIS2_PLACEMENT_3D('',#410291,#410292,#410293); +#410291 = CARTESIAN_POINT('',(139.36249994135,-71.29999994135,0.)); +#410292 = DIRECTION('',(-0.,-0.,1.)); +#410293 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#410294 = ADVANCED_FACE('',(#410295),#410320,.F.); +#410295 = FACE_BOUND('',#410296,.F.); +#410296 = EDGE_LOOP('',(#410297,#410298,#410306,#410314)); +#410297 = ORIENTED_EDGE('',*,*,#410275,.T.); +#410298 = ORIENTED_EDGE('',*,*,#410299,.T.); +#410299 = EDGE_CURVE('',#410267,#410300,#410302,.T.); +#410300 = VERTEX_POINT('',#410301); +#410301 = CARTESIAN_POINT('',(138.1875,-71.45,-4.E-02)); +#410302 = LINE('',#410303,#410304); +#410303 = CARTESIAN_POINT('',(139.3625,-71.45,-4.E-02)); +#410304 = VECTOR('',#410305,1.); +#410305 = DIRECTION('',(-1.,0.,0.)); +#410306 = ORIENTED_EDGE('',*,*,#410307,.F.); +#410307 = EDGE_CURVE('',#410308,#410300,#410310,.T.); +#410308 = VERTEX_POINT('',#410309); +#410309 = CARTESIAN_POINT('',(138.1875,-71.45,0.)); +#410310 = LINE('',#410311,#410312); +#410311 = CARTESIAN_POINT('',(138.1875,-71.45,0.)); +#410312 = VECTOR('',#410313,1.); +#410313 = DIRECTION('',(0.,0.,-1.)); +#410314 = ORIENTED_EDGE('',*,*,#410315,.F.); +#410315 = EDGE_CURVE('',#410276,#410308,#410316,.T.); +#410316 = LINE('',#410317,#410318); +#410317 = CARTESIAN_POINT('',(139.3625,-71.45,0.)); +#410318 = VECTOR('',#410319,1.); +#410319 = DIRECTION('',(-1.,0.,0.)); +#410320 = PLANE('',#410321); +#410321 = AXIS2_PLACEMENT_3D('',#410322,#410323,#410324); +#410322 = CARTESIAN_POINT('',(139.3625,-71.45,0.)); +#410323 = DIRECTION('',(0.,1.,0.)); +#410324 = DIRECTION('',(-1.,0.,0.)); +#410325 = ADVANCED_FACE('',(#410326),#410353,.T.); +#410326 = FACE_BOUND('',#410327,.F.); +#410327 = EDGE_LOOP('',(#410328,#410329,#410338,#410346)); +#410328 = ORIENTED_EDGE('',*,*,#410307,.T.); +#410329 = ORIENTED_EDGE('',*,*,#410330,.T.); +#410330 = EDGE_CURVE('',#410300,#410331,#410333,.T.); +#410331 = VERTEX_POINT('',#410332); +#410332 = CARTESIAN_POINT('',(138.0375,-71.3,-4.E-02)); +#410333 = CIRCLE('',#410334,0.150000058649); +#410334 = AXIS2_PLACEMENT_3D('',#410335,#410336,#410337); +#410335 = CARTESIAN_POINT('',(138.18750005864,-71.29999994135,-4.E-02)); +#410336 = DIRECTION('',(0.,0.,-1.)); +#410337 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#410338 = ORIENTED_EDGE('',*,*,#410339,.F.); +#410339 = EDGE_CURVE('',#410340,#410331,#410342,.T.); +#410340 = VERTEX_POINT('',#410341); +#410341 = CARTESIAN_POINT('',(138.0375,-71.3,0.)); +#410342 = LINE('',#410343,#410344); +#410343 = CARTESIAN_POINT('',(138.0375,-71.3,0.)); +#410344 = VECTOR('',#410345,1.); +#410345 = DIRECTION('',(0.,0.,-1.)); +#410346 = ORIENTED_EDGE('',*,*,#410347,.F.); +#410347 = EDGE_CURVE('',#410308,#410340,#410348,.T.); +#410348 = CIRCLE('',#410349,0.150000058649); +#410349 = AXIS2_PLACEMENT_3D('',#410350,#410351,#410352); +#410350 = CARTESIAN_POINT('',(138.18750005864,-71.29999994135,0.)); +#410351 = DIRECTION('',(0.,0.,-1.)); +#410352 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#410353 = CYLINDRICAL_SURFACE('',#410354,0.150000058649); +#410354 = AXIS2_PLACEMENT_3D('',#410355,#410356,#410357); +#410355 = CARTESIAN_POINT('',(138.18750005864,-71.29999994135,0.)); +#410356 = DIRECTION('',(-0.,-0.,1.)); +#410357 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#410358 = ADVANCED_FACE('',(#410359),#410375,.F.); +#410359 = FACE_BOUND('',#410360,.F.); +#410360 = EDGE_LOOP('',(#410361,#410362,#410368,#410369)); +#410361 = ORIENTED_EDGE('',*,*,#410339,.T.); +#410362 = ORIENTED_EDGE('',*,*,#410363,.T.); +#410363 = EDGE_CURVE('',#410331,#410131,#410364,.T.); +#410364 = LINE('',#410365,#410366); +#410365 = CARTESIAN_POINT('',(138.0375,-71.3,-4.E-02)); +#410366 = VECTOR('',#410367,1.); +#410367 = DIRECTION('',(0.,1.,0.)); +#410368 = ORIENTED_EDGE('',*,*,#410128,.F.); +#410369 = ORIENTED_EDGE('',*,*,#410370,.F.); +#410370 = EDGE_CURVE('',#410340,#410129,#410371,.T.); +#410371 = LINE('',#410372,#410373); +#410372 = CARTESIAN_POINT('',(138.0375,-71.3,0.)); +#410373 = VECTOR('',#410374,1.); +#410374 = DIRECTION('',(0.,1.,0.)); +#410375 = PLANE('',#410376); +#410376 = AXIS2_PLACEMENT_3D('',#410377,#410378,#410379); +#410377 = CARTESIAN_POINT('',(138.0375,-71.3,0.)); +#410378 = DIRECTION('',(1.,-0.,0.)); +#410379 = DIRECTION('',(0.,1.,0.)); +#410380 = ADVANCED_FACE('',(#410381),#410391,.F.); +#410381 = FACE_BOUND('',#410382,.F.); +#410382 = EDGE_LOOP('',(#410383,#410384,#410385,#410386,#410387,#410388, + #410389,#410390)); +#410383 = ORIENTED_EDGE('',*,*,#410155,.T.); +#410384 = ORIENTED_EDGE('',*,*,#410187,.T.); +#410385 = ORIENTED_EDGE('',*,*,#410219,.T.); +#410386 = ORIENTED_EDGE('',*,*,#410251,.T.); +#410387 = ORIENTED_EDGE('',*,*,#410283,.T.); +#410388 = ORIENTED_EDGE('',*,*,#410315,.T.); +#410389 = ORIENTED_EDGE('',*,*,#410347,.T.); +#410390 = ORIENTED_EDGE('',*,*,#410370,.T.); +#410391 = PLANE('',#410392); +#410392 = AXIS2_PLACEMENT_3D('',#410393,#410394,#410395); +#410393 = CARTESIAN_POINT('',(0.,0.,0.)); +#410394 = DIRECTION('',(-0.,-0.,-1.)); +#410395 = DIRECTION('',(-1.,0.,0.)); +#410396 = ADVANCED_FACE('',(#410397),#410407,.T.); +#410397 = FACE_BOUND('',#410398,.T.); +#410398 = EDGE_LOOP('',(#410399,#410400,#410401,#410402,#410403,#410404, + #410405,#410406)); +#410399 = ORIENTED_EDGE('',*,*,#410138,.T.); +#410400 = ORIENTED_EDGE('',*,*,#410171,.T.); +#410401 = ORIENTED_EDGE('',*,*,#410202,.T.); +#410402 = ORIENTED_EDGE('',*,*,#410235,.T.); +#410403 = ORIENTED_EDGE('',*,*,#410266,.T.); +#410404 = ORIENTED_EDGE('',*,*,#410299,.T.); +#410405 = ORIENTED_EDGE('',*,*,#410330,.T.); +#410406 = ORIENTED_EDGE('',*,*,#410363,.T.); +#410407 = PLANE('',#410408); +#410408 = AXIS2_PLACEMENT_3D('',#410409,#410410,#410411); +#410409 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#410410 = DIRECTION('',(-0.,-0.,-1.)); +#410411 = DIRECTION('',(-1.,0.,0.)); +#410412 = MANIFOLD_SOLID_BREP('',#410413); +#410413 = CLOSED_SHELL('',(#410414,#410456,#410487,#410520,#410551, + #410584,#410615,#410648,#410670,#410686)); +#410414 = ADVANCED_FACE('',(#410415),#410451,.T.); +#410415 = FACE_BOUND('',#410416,.F.); +#410416 = EDGE_LOOP('',(#410417,#410427,#410436,#410444)); +#410417 = ORIENTED_EDGE('',*,*,#410418,.T.); +#410418 = EDGE_CURVE('',#410419,#410421,#410423,.T.); +#410419 = VERTEX_POINT('',#410420); +#410420 = CARTESIAN_POINT('',(145.1125,-124.8,0.)); +#410421 = VERTEX_POINT('',#410422); +#410422 = CARTESIAN_POINT('',(145.1125,-124.8,-4.E-02)); +#410423 = LINE('',#410424,#410425); +#410424 = CARTESIAN_POINT('',(145.1125,-124.8,0.)); +#410425 = VECTOR('',#410426,1.); +#410426 = DIRECTION('',(0.,0.,-1.)); +#410427 = ORIENTED_EDGE('',*,*,#410428,.T.); +#410428 = EDGE_CURVE('',#410421,#410429,#410431,.T.); +#410429 = VERTEX_POINT('',#410430); +#410430 = CARTESIAN_POINT('',(145.2625,-124.65,-4.E-02)); +#410431 = CIRCLE('',#410432,0.150000058649); +#410432 = AXIS2_PLACEMENT_3D('',#410433,#410434,#410435); +#410433 = CARTESIAN_POINT('',(145.26250005864,-124.8000000586,-4.E-02)); +#410434 = DIRECTION('',(0.,0.,-1.)); +#410435 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#410436 = ORIENTED_EDGE('',*,*,#410437,.F.); +#410437 = EDGE_CURVE('',#410438,#410429,#410440,.T.); +#410438 = VERTEX_POINT('',#410439); +#410439 = CARTESIAN_POINT('',(145.2625,-124.65,0.)); +#410440 = LINE('',#410441,#410442); +#410441 = CARTESIAN_POINT('',(145.2625,-124.65,0.)); +#410442 = VECTOR('',#410443,1.); +#410443 = DIRECTION('',(0.,0.,-1.)); +#410444 = ORIENTED_EDGE('',*,*,#410445,.F.); +#410445 = EDGE_CURVE('',#410419,#410438,#410446,.T.); +#410446 = CIRCLE('',#410447,0.150000058649); +#410447 = AXIS2_PLACEMENT_3D('',#410448,#410449,#410450); +#410448 = CARTESIAN_POINT('',(145.26250005864,-124.8000000586,0.)); +#410449 = DIRECTION('',(0.,0.,-1.)); +#410450 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#410451 = CYLINDRICAL_SURFACE('',#410452,0.150000058649); +#410452 = AXIS2_PLACEMENT_3D('',#410453,#410454,#410455); +#410453 = CARTESIAN_POINT('',(145.26250005864,-124.8000000586,0.)); +#410454 = DIRECTION('',(-0.,-0.,1.)); +#410455 = DIRECTION('',(-1.,3.909951247591E-07,0.)); +#410456 = ADVANCED_FACE('',(#410457),#410482,.F.); +#410457 = FACE_BOUND('',#410458,.F.); +#410458 = EDGE_LOOP('',(#410459,#410460,#410468,#410476)); +#410459 = ORIENTED_EDGE('',*,*,#410437,.T.); +#410460 = ORIENTED_EDGE('',*,*,#410461,.T.); +#410461 = EDGE_CURVE('',#410429,#410462,#410464,.T.); +#410462 = VERTEX_POINT('',#410463); +#410463 = CARTESIAN_POINT('',(146.4375,-124.65,-4.E-02)); +#410464 = LINE('',#410465,#410466); +#410465 = CARTESIAN_POINT('',(145.2625,-124.65,-4.E-02)); +#410466 = VECTOR('',#410467,1.); +#410467 = DIRECTION('',(1.,0.,0.)); +#410468 = ORIENTED_EDGE('',*,*,#410469,.F.); +#410469 = EDGE_CURVE('',#410470,#410462,#410472,.T.); +#410470 = VERTEX_POINT('',#410471); +#410471 = CARTESIAN_POINT('',(146.4375,-124.65,0.)); +#410472 = LINE('',#410473,#410474); +#410473 = CARTESIAN_POINT('',(146.4375,-124.65,0.)); +#410474 = VECTOR('',#410475,1.); +#410475 = DIRECTION('',(0.,0.,-1.)); +#410476 = ORIENTED_EDGE('',*,*,#410477,.F.); +#410477 = EDGE_CURVE('',#410438,#410470,#410478,.T.); +#410478 = LINE('',#410479,#410480); +#410479 = CARTESIAN_POINT('',(145.2625,-124.65,0.)); +#410480 = VECTOR('',#410481,1.); +#410481 = DIRECTION('',(1.,0.,0.)); +#410482 = PLANE('',#410483); +#410483 = AXIS2_PLACEMENT_3D('',#410484,#410485,#410486); +#410484 = CARTESIAN_POINT('',(145.2625,-124.65,0.)); +#410485 = DIRECTION('',(0.,-1.,0.)); +#410486 = DIRECTION('',(1.,0.,0.)); +#410487 = ADVANCED_FACE('',(#410488),#410515,.T.); +#410488 = FACE_BOUND('',#410489,.F.); +#410489 = EDGE_LOOP('',(#410490,#410491,#410500,#410508)); +#410490 = ORIENTED_EDGE('',*,*,#410469,.T.); +#410491 = ORIENTED_EDGE('',*,*,#410492,.T.); +#410492 = EDGE_CURVE('',#410462,#410493,#410495,.T.); +#410493 = VERTEX_POINT('',#410494); +#410494 = CARTESIAN_POINT('',(146.5875,-124.8,-4.E-02)); +#410495 = CIRCLE('',#410496,0.150000058649); +#410496 = AXIS2_PLACEMENT_3D('',#410497,#410498,#410499); +#410497 = CARTESIAN_POINT('',(146.43749994135,-124.8000000586,-4.E-02)); +#410498 = DIRECTION('',(0.,0.,-1.)); +#410499 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#410500 = ORIENTED_EDGE('',*,*,#410501,.F.); +#410501 = EDGE_CURVE('',#410502,#410493,#410504,.T.); +#410502 = VERTEX_POINT('',#410503); +#410503 = CARTESIAN_POINT('',(146.5875,-124.8,0.)); +#410504 = LINE('',#410505,#410506); +#410505 = CARTESIAN_POINT('',(146.5875,-124.8,0.)); +#410506 = VECTOR('',#410507,1.); +#410507 = DIRECTION('',(0.,0.,-1.)); +#410508 = ORIENTED_EDGE('',*,*,#410509,.F.); +#410509 = EDGE_CURVE('',#410470,#410502,#410510,.T.); +#410510 = CIRCLE('',#410511,0.150000058649); +#410511 = AXIS2_PLACEMENT_3D('',#410512,#410513,#410514); +#410512 = CARTESIAN_POINT('',(146.43749994135,-124.8000000586,0.)); +#410513 = DIRECTION('',(0.,0.,-1.)); +#410514 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#410515 = CYLINDRICAL_SURFACE('',#410516,0.150000058649); +#410516 = AXIS2_PLACEMENT_3D('',#410517,#410518,#410519); +#410517 = CARTESIAN_POINT('',(146.43749994135,-124.8000000586,0.)); +#410518 = DIRECTION('',(-0.,-0.,1.)); +#410519 = DIRECTION('',(3.909954089759E-07,1.,0.)); +#410520 = ADVANCED_FACE('',(#410521),#410546,.F.); +#410521 = FACE_BOUND('',#410522,.F.); +#410522 = EDGE_LOOP('',(#410523,#410524,#410532,#410540)); +#410523 = ORIENTED_EDGE('',*,*,#410501,.T.); +#410524 = ORIENTED_EDGE('',*,*,#410525,.T.); +#410525 = EDGE_CURVE('',#410493,#410526,#410528,.T.); +#410526 = VERTEX_POINT('',#410527); +#410527 = CARTESIAN_POINT('',(146.5875,-125.1,-4.E-02)); +#410528 = LINE('',#410529,#410530); +#410529 = CARTESIAN_POINT('',(146.5875,-124.8,-4.E-02)); +#410530 = VECTOR('',#410531,1.); +#410531 = DIRECTION('',(0.,-1.,0.)); +#410532 = ORIENTED_EDGE('',*,*,#410533,.F.); +#410533 = EDGE_CURVE('',#410534,#410526,#410536,.T.); +#410534 = VERTEX_POINT('',#410535); +#410535 = CARTESIAN_POINT('',(146.5875,-125.1,0.)); +#410536 = LINE('',#410537,#410538); +#410537 = CARTESIAN_POINT('',(146.5875,-125.1,0.)); +#410538 = VECTOR('',#410539,1.); +#410539 = DIRECTION('',(0.,0.,-1.)); +#410540 = ORIENTED_EDGE('',*,*,#410541,.F.); +#410541 = EDGE_CURVE('',#410502,#410534,#410542,.T.); +#410542 = LINE('',#410543,#410544); +#410543 = CARTESIAN_POINT('',(146.5875,-124.8,0.)); +#410544 = VECTOR('',#410545,1.); +#410545 = DIRECTION('',(0.,-1.,0.)); +#410546 = PLANE('',#410547); +#410547 = AXIS2_PLACEMENT_3D('',#410548,#410549,#410550); +#410548 = CARTESIAN_POINT('',(146.5875,-124.8,0.)); +#410549 = DIRECTION('',(-1.,-0.,-0.)); +#410550 = DIRECTION('',(0.,-1.,0.)); +#410551 = ADVANCED_FACE('',(#410552),#410579,.T.); +#410552 = FACE_BOUND('',#410553,.F.); +#410553 = EDGE_LOOP('',(#410554,#410555,#410564,#410572)); +#410554 = ORIENTED_EDGE('',*,*,#410533,.T.); +#410555 = ORIENTED_EDGE('',*,*,#410556,.T.); +#410556 = EDGE_CURVE('',#410526,#410557,#410559,.T.); +#410557 = VERTEX_POINT('',#410558); +#410558 = CARTESIAN_POINT('',(146.4375,-125.25,-4.E-02)); +#410559 = CIRCLE('',#410560,0.150000058649); +#410560 = AXIS2_PLACEMENT_3D('',#410561,#410562,#410563); +#410561 = CARTESIAN_POINT('',(146.43749994135,-125.0999999413,-4.E-02)); +#410562 = DIRECTION('',(0.,0.,-1.)); +#410563 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#410564 = ORIENTED_EDGE('',*,*,#410565,.F.); +#410565 = EDGE_CURVE('',#410566,#410557,#410568,.T.); +#410566 = VERTEX_POINT('',#410567); +#410567 = CARTESIAN_POINT('',(146.4375,-125.25,0.)); +#410568 = LINE('',#410569,#410570); +#410569 = CARTESIAN_POINT('',(146.4375,-125.25,0.)); +#410570 = VECTOR('',#410571,1.); +#410571 = DIRECTION('',(0.,0.,-1.)); +#410572 = ORIENTED_EDGE('',*,*,#410573,.F.); +#410573 = EDGE_CURVE('',#410534,#410566,#410574,.T.); +#410574 = CIRCLE('',#410575,0.150000058649); +#410575 = AXIS2_PLACEMENT_3D('',#410576,#410577,#410578); +#410576 = CARTESIAN_POINT('',(146.43749994135,-125.0999999413,0.)); +#410577 = DIRECTION('',(0.,0.,-1.)); +#410578 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#410579 = CYLINDRICAL_SURFACE('',#410580,0.150000058649); +#410580 = AXIS2_PLACEMENT_3D('',#410581,#410582,#410583); +#410581 = CARTESIAN_POINT('',(146.43749994135,-125.0999999413,0.)); +#410582 = DIRECTION('',(-0.,-0.,1.)); +#410583 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#410584 = ADVANCED_FACE('',(#410585),#410610,.F.); +#410585 = FACE_BOUND('',#410586,.F.); +#410586 = EDGE_LOOP('',(#410587,#410588,#410596,#410604)); +#410587 = ORIENTED_EDGE('',*,*,#410565,.T.); +#410588 = ORIENTED_EDGE('',*,*,#410589,.T.); +#410589 = EDGE_CURVE('',#410557,#410590,#410592,.T.); +#410590 = VERTEX_POINT('',#410591); +#410591 = CARTESIAN_POINT('',(145.2625,-125.25,-4.E-02)); +#410592 = LINE('',#410593,#410594); +#410593 = CARTESIAN_POINT('',(146.4375,-125.25,-4.E-02)); +#410594 = VECTOR('',#410595,1.); +#410595 = DIRECTION('',(-1.,0.,0.)); +#410596 = ORIENTED_EDGE('',*,*,#410597,.F.); +#410597 = EDGE_CURVE('',#410598,#410590,#410600,.T.); +#410598 = VERTEX_POINT('',#410599); +#410599 = CARTESIAN_POINT('',(145.2625,-125.25,0.)); +#410600 = LINE('',#410601,#410602); +#410601 = CARTESIAN_POINT('',(145.2625,-125.25,0.)); +#410602 = VECTOR('',#410603,1.); +#410603 = DIRECTION('',(0.,0.,-1.)); +#410604 = ORIENTED_EDGE('',*,*,#410605,.F.); +#410605 = EDGE_CURVE('',#410566,#410598,#410606,.T.); +#410606 = LINE('',#410607,#410608); +#410607 = CARTESIAN_POINT('',(146.4375,-125.25,0.)); +#410608 = VECTOR('',#410609,1.); +#410609 = DIRECTION('',(-1.,0.,0.)); +#410610 = PLANE('',#410611); +#410611 = AXIS2_PLACEMENT_3D('',#410612,#410613,#410614); +#410612 = CARTESIAN_POINT('',(146.4375,-125.25,0.)); +#410613 = DIRECTION('',(0.,1.,0.)); +#410614 = DIRECTION('',(-1.,0.,0.)); +#410615 = ADVANCED_FACE('',(#410616),#410643,.T.); +#410616 = FACE_BOUND('',#410617,.F.); +#410617 = EDGE_LOOP('',(#410618,#410619,#410628,#410636)); +#410618 = ORIENTED_EDGE('',*,*,#410597,.T.); +#410619 = ORIENTED_EDGE('',*,*,#410620,.T.); +#410620 = EDGE_CURVE('',#410590,#410621,#410623,.T.); +#410621 = VERTEX_POINT('',#410622); +#410622 = CARTESIAN_POINT('',(145.1125,-125.1,-4.E-02)); +#410623 = CIRCLE('',#410624,0.150000058649); +#410624 = AXIS2_PLACEMENT_3D('',#410625,#410626,#410627); +#410625 = CARTESIAN_POINT('',(145.26250005864,-125.0999999413,-4.E-02)); +#410626 = DIRECTION('',(0.,0.,-1.)); +#410627 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#410628 = ORIENTED_EDGE('',*,*,#410629,.F.); +#410629 = EDGE_CURVE('',#410630,#410621,#410632,.T.); +#410630 = VERTEX_POINT('',#410631); +#410631 = CARTESIAN_POINT('',(145.1125,-125.1,0.)); +#410632 = LINE('',#410633,#410634); +#410633 = CARTESIAN_POINT('',(145.1125,-125.1,0.)); +#410634 = VECTOR('',#410635,1.); +#410635 = DIRECTION('',(0.,0.,-1.)); +#410636 = ORIENTED_EDGE('',*,*,#410637,.F.); +#410637 = EDGE_CURVE('',#410598,#410630,#410638,.T.); +#410638 = CIRCLE('',#410639,0.150000058649); +#410639 = AXIS2_PLACEMENT_3D('',#410640,#410641,#410642); +#410640 = CARTESIAN_POINT('',(145.26250005864,-125.0999999413,0.)); +#410641 = DIRECTION('',(0.,0.,-1.)); +#410642 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#410643 = CYLINDRICAL_SURFACE('',#410644,0.150000058649); +#410644 = AXIS2_PLACEMENT_3D('',#410645,#410646,#410647); +#410645 = CARTESIAN_POINT('',(145.26250005864,-125.0999999413,0.)); +#410646 = DIRECTION('',(-0.,-0.,1.)); +#410647 = DIRECTION('',(-3.909952194981E-07,-1.,-0.)); +#410648 = ADVANCED_FACE('',(#410649),#410665,.F.); +#410649 = FACE_BOUND('',#410650,.F.); +#410650 = EDGE_LOOP('',(#410651,#410652,#410658,#410659)); +#410651 = ORIENTED_EDGE('',*,*,#410629,.T.); +#410652 = ORIENTED_EDGE('',*,*,#410653,.T.); +#410653 = EDGE_CURVE('',#410621,#410421,#410654,.T.); +#410654 = LINE('',#410655,#410656); +#410655 = CARTESIAN_POINT('',(145.1125,-125.1,-4.E-02)); +#410656 = VECTOR('',#410657,1.); +#410657 = DIRECTION('',(0.,1.,0.)); +#410658 = ORIENTED_EDGE('',*,*,#410418,.F.); +#410659 = ORIENTED_EDGE('',*,*,#410660,.F.); +#410660 = EDGE_CURVE('',#410630,#410419,#410661,.T.); +#410661 = LINE('',#410662,#410663); +#410662 = CARTESIAN_POINT('',(145.1125,-125.1,0.)); +#410663 = VECTOR('',#410664,1.); +#410664 = DIRECTION('',(0.,1.,0.)); +#410665 = PLANE('',#410666); +#410666 = AXIS2_PLACEMENT_3D('',#410667,#410668,#410669); +#410667 = CARTESIAN_POINT('',(145.1125,-125.1,0.)); +#410668 = DIRECTION('',(1.,-0.,0.)); +#410669 = DIRECTION('',(0.,1.,0.)); +#410670 = ADVANCED_FACE('',(#410671),#410681,.F.); +#410671 = FACE_BOUND('',#410672,.F.); +#410672 = EDGE_LOOP('',(#410673,#410674,#410675,#410676,#410677,#410678, + #410679,#410680)); +#410673 = ORIENTED_EDGE('',*,*,#410445,.T.); +#410674 = ORIENTED_EDGE('',*,*,#410477,.T.); +#410675 = ORIENTED_EDGE('',*,*,#410509,.T.); +#410676 = ORIENTED_EDGE('',*,*,#410541,.T.); +#410677 = ORIENTED_EDGE('',*,*,#410573,.T.); +#410678 = ORIENTED_EDGE('',*,*,#410605,.T.); +#410679 = ORIENTED_EDGE('',*,*,#410637,.T.); +#410680 = ORIENTED_EDGE('',*,*,#410660,.T.); +#410681 = PLANE('',#410682); +#410682 = AXIS2_PLACEMENT_3D('',#410683,#410684,#410685); +#410683 = CARTESIAN_POINT('',(0.,0.,0.)); +#410684 = DIRECTION('',(-0.,-0.,-1.)); +#410685 = DIRECTION('',(-1.,0.,0.)); +#410686 = ADVANCED_FACE('',(#410687),#410697,.T.); +#410687 = FACE_BOUND('',#410688,.T.); +#410688 = EDGE_LOOP('',(#410689,#410690,#410691,#410692,#410693,#410694, + #410695,#410696)); +#410689 = ORIENTED_EDGE('',*,*,#410428,.T.); +#410690 = ORIENTED_EDGE('',*,*,#410461,.T.); +#410691 = ORIENTED_EDGE('',*,*,#410492,.T.); +#410692 = ORIENTED_EDGE('',*,*,#410525,.T.); +#410693 = ORIENTED_EDGE('',*,*,#410556,.T.); +#410694 = ORIENTED_EDGE('',*,*,#410589,.T.); +#410695 = ORIENTED_EDGE('',*,*,#410620,.T.); +#410696 = ORIENTED_EDGE('',*,*,#410653,.T.); +#410697 = PLANE('',#410698); +#410698 = AXIS2_PLACEMENT_3D('',#410699,#410700,#410701); +#410699 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#410700 = DIRECTION('',(-0.,-0.,-1.)); +#410701 = DIRECTION('',(-1.,0.,0.)); +#410702 = MANIFOLD_SOLID_BREP('',#410703); +#410703 = CLOSED_SHELL('',(#410704,#410746,#410777,#410810,#410841, + #410874,#410905,#410938,#410960,#410976)); +#410704 = ADVANCED_FACE('',(#410705),#410741,.T.); +#410705 = FACE_BOUND('',#410706,.F.); +#410706 = EDGE_LOOP('',(#410707,#410717,#410726,#410734)); +#410707 = ORIENTED_EDGE('',*,*,#410708,.T.); +#410708 = EDGE_CURVE('',#410709,#410711,#410713,.T.); +#410709 = VERTEX_POINT('',#410710); +#410710 = CARTESIAN_POINT('',(124.73,-123.815,0.)); +#410711 = VERTEX_POINT('',#410712); +#410712 = CARTESIAN_POINT('',(124.73,-123.815,-4.E-02)); +#410713 = LINE('',#410714,#410715); +#410714 = CARTESIAN_POINT('',(124.73,-123.815,0.)); +#410715 = VECTOR('',#410716,1.); +#410716 = DIRECTION('',(0.,0.,-1.)); +#410717 = ORIENTED_EDGE('',*,*,#410718,.T.); +#410718 = EDGE_CURVE('',#410711,#410719,#410721,.T.); +#410719 = VERTEX_POINT('',#410720); +#410720 = CARTESIAN_POINT('',(124.865,-123.68,-4.E-02)); +#410721 = CIRCLE('',#410722,0.135001418495); +#410722 = AXIS2_PLACEMENT_3D('',#410723,#410724,#410725); +#410723 = CARTESIAN_POINT('',(124.86500141848,-123.8150014184,-4.E-02)); +#410724 = DIRECTION('',(0.,0.,-1.)); +#410725 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#410726 = ORIENTED_EDGE('',*,*,#410727,.F.); +#410727 = EDGE_CURVE('',#410728,#410719,#410730,.T.); +#410728 = VERTEX_POINT('',#410729); +#410729 = CARTESIAN_POINT('',(124.865,-123.68,0.)); +#410730 = LINE('',#410731,#410732); +#410731 = CARTESIAN_POINT('',(124.865,-123.68,0.)); +#410732 = VECTOR('',#410733,1.); +#410733 = DIRECTION('',(0.,0.,-1.)); +#410734 = ORIENTED_EDGE('',*,*,#410735,.F.); +#410735 = EDGE_CURVE('',#410709,#410728,#410736,.T.); +#410736 = CIRCLE('',#410737,0.135001418495); +#410737 = AXIS2_PLACEMENT_3D('',#410738,#410739,#410740); +#410738 = CARTESIAN_POINT('',(124.86500141848,-123.8150014184,0.)); +#410739 = DIRECTION('',(0.,0.,-1.)); +#410740 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#410741 = CYLINDRICAL_SURFACE('',#410742,0.135001418495); +#410742 = AXIS2_PLACEMENT_3D('',#410743,#410744,#410745); +#410743 = CARTESIAN_POINT('',(124.86500141848,-123.8150014184,0.)); +#410744 = DIRECTION('',(-0.,-0.,1.)); +#410745 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#410746 = ADVANCED_FACE('',(#410747),#410772,.F.); +#410747 = FACE_BOUND('',#410748,.F.); +#410748 = EDGE_LOOP('',(#410749,#410750,#410758,#410766)); +#410749 = ORIENTED_EDGE('',*,*,#410727,.T.); +#410750 = ORIENTED_EDGE('',*,*,#410751,.T.); +#410751 = EDGE_CURVE('',#410719,#410752,#410754,.T.); +#410752 = VERTEX_POINT('',#410753); +#410753 = CARTESIAN_POINT('',(125.135,-123.68,-4.E-02)); +#410754 = LINE('',#410755,#410756); +#410755 = CARTESIAN_POINT('',(124.865,-123.68,-4.E-02)); +#410756 = VECTOR('',#410757,1.); +#410757 = DIRECTION('',(1.,0.,0.)); +#410758 = ORIENTED_EDGE('',*,*,#410759,.F.); +#410759 = EDGE_CURVE('',#410760,#410752,#410762,.T.); +#410760 = VERTEX_POINT('',#410761); +#410761 = CARTESIAN_POINT('',(125.135,-123.68,0.)); +#410762 = LINE('',#410763,#410764); +#410763 = CARTESIAN_POINT('',(125.135,-123.68,0.)); +#410764 = VECTOR('',#410765,1.); +#410765 = DIRECTION('',(0.,0.,-1.)); +#410766 = ORIENTED_EDGE('',*,*,#410767,.F.); +#410767 = EDGE_CURVE('',#410728,#410760,#410768,.T.); +#410768 = LINE('',#410769,#410770); +#410769 = CARTESIAN_POINT('',(124.865,-123.68,0.)); +#410770 = VECTOR('',#410771,1.); +#410771 = DIRECTION('',(1.,0.,0.)); +#410772 = PLANE('',#410773); +#410773 = AXIS2_PLACEMENT_3D('',#410774,#410775,#410776); +#410774 = CARTESIAN_POINT('',(124.865,-123.68,0.)); +#410775 = DIRECTION('',(0.,-1.,0.)); +#410776 = DIRECTION('',(1.,0.,0.)); +#410777 = ADVANCED_FACE('',(#410778),#410805,.T.); +#410778 = FACE_BOUND('',#410779,.F.); +#410779 = EDGE_LOOP('',(#410780,#410781,#410790,#410798)); +#410780 = ORIENTED_EDGE('',*,*,#410759,.T.); +#410781 = ORIENTED_EDGE('',*,*,#410782,.T.); +#410782 = EDGE_CURVE('',#410752,#410783,#410785,.T.); +#410783 = VERTEX_POINT('',#410784); +#410784 = CARTESIAN_POINT('',(125.27,-123.815,-4.E-02)); +#410785 = CIRCLE('',#410786,0.135001418495); +#410786 = AXIS2_PLACEMENT_3D('',#410787,#410788,#410789); +#410787 = CARTESIAN_POINT('',(125.13499858151,-123.8150014184,-4.E-02)); +#410788 = DIRECTION('',(0.,0.,-1.)); +#410789 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#410790 = ORIENTED_EDGE('',*,*,#410791,.F.); +#410791 = EDGE_CURVE('',#410792,#410783,#410794,.T.); +#410792 = VERTEX_POINT('',#410793); +#410793 = CARTESIAN_POINT('',(125.27,-123.815,0.)); +#410794 = LINE('',#410795,#410796); +#410795 = CARTESIAN_POINT('',(125.27,-123.815,0.)); +#410796 = VECTOR('',#410797,1.); +#410797 = DIRECTION('',(0.,0.,-1.)); +#410798 = ORIENTED_EDGE('',*,*,#410799,.F.); +#410799 = EDGE_CURVE('',#410760,#410792,#410800,.T.); +#410800 = CIRCLE('',#410801,0.135001418495); +#410801 = AXIS2_PLACEMENT_3D('',#410802,#410803,#410804); +#410802 = CARTESIAN_POINT('',(125.13499858151,-123.8150014184,0.)); +#410803 = DIRECTION('',(0.,0.,-1.)); +#410804 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#410805 = CYLINDRICAL_SURFACE('',#410806,0.135001418495); +#410806 = AXIS2_PLACEMENT_3D('',#410807,#410808,#410809); +#410807 = CARTESIAN_POINT('',(125.13499858151,-123.8150014184,0.)); +#410808 = DIRECTION('',(-0.,-0.,1.)); +#410809 = DIRECTION('',(1.050720662156E-05,0.999999999945,0.)); +#410810 = ADVANCED_FACE('',(#410811),#410836,.F.); +#410811 = FACE_BOUND('',#410812,.F.); +#410812 = EDGE_LOOP('',(#410813,#410814,#410822,#410830)); +#410813 = ORIENTED_EDGE('',*,*,#410791,.T.); +#410814 = ORIENTED_EDGE('',*,*,#410815,.T.); +#410815 = EDGE_CURVE('',#410783,#410816,#410818,.T.); +#410816 = VERTEX_POINT('',#410817); +#410817 = CARTESIAN_POINT('',(125.27,-124.185,-4.E-02)); +#410818 = LINE('',#410819,#410820); +#410819 = CARTESIAN_POINT('',(125.27,-123.815,-4.E-02)); +#410820 = VECTOR('',#410821,1.); +#410821 = DIRECTION('',(0.,-1.,0.)); +#410822 = ORIENTED_EDGE('',*,*,#410823,.F.); +#410823 = EDGE_CURVE('',#410824,#410816,#410826,.T.); +#410824 = VERTEX_POINT('',#410825); +#410825 = CARTESIAN_POINT('',(125.27,-124.185,0.)); +#410826 = LINE('',#410827,#410828); +#410827 = CARTESIAN_POINT('',(125.27,-124.185,0.)); +#410828 = VECTOR('',#410829,1.); +#410829 = DIRECTION('',(0.,0.,-1.)); +#410830 = ORIENTED_EDGE('',*,*,#410831,.F.); +#410831 = EDGE_CURVE('',#410792,#410824,#410832,.T.); +#410832 = LINE('',#410833,#410834); +#410833 = CARTESIAN_POINT('',(125.27,-123.815,0.)); +#410834 = VECTOR('',#410835,1.); +#410835 = DIRECTION('',(0.,-1.,0.)); +#410836 = PLANE('',#410837); +#410837 = AXIS2_PLACEMENT_3D('',#410838,#410839,#410840); +#410838 = CARTESIAN_POINT('',(125.27,-123.815,0.)); +#410839 = DIRECTION('',(-1.,-0.,-0.)); +#410840 = DIRECTION('',(0.,-1.,0.)); +#410841 = ADVANCED_FACE('',(#410842),#410869,.T.); +#410842 = FACE_BOUND('',#410843,.F.); +#410843 = EDGE_LOOP('',(#410844,#410845,#410854,#410862)); +#410844 = ORIENTED_EDGE('',*,*,#410823,.T.); +#410845 = ORIENTED_EDGE('',*,*,#410846,.T.); +#410846 = EDGE_CURVE('',#410816,#410847,#410849,.T.); +#410847 = VERTEX_POINT('',#410848); +#410848 = CARTESIAN_POINT('',(125.135,-124.32,-4.E-02)); +#410849 = CIRCLE('',#410850,0.135001418495); +#410850 = AXIS2_PLACEMENT_3D('',#410851,#410852,#410853); +#410851 = CARTESIAN_POINT('',(125.13499858151,-124.1849985815,-4.E-02)); +#410852 = DIRECTION('',(0.,0.,-1.)); +#410853 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#410854 = ORIENTED_EDGE('',*,*,#410855,.F.); +#410855 = EDGE_CURVE('',#410856,#410847,#410858,.T.); +#410856 = VERTEX_POINT('',#410857); +#410857 = CARTESIAN_POINT('',(125.135,-124.32,0.)); +#410858 = LINE('',#410859,#410860); +#410859 = CARTESIAN_POINT('',(125.135,-124.32,0.)); +#410860 = VECTOR('',#410861,1.); +#410861 = DIRECTION('',(0.,0.,-1.)); +#410862 = ORIENTED_EDGE('',*,*,#410863,.F.); +#410863 = EDGE_CURVE('',#410824,#410856,#410864,.T.); +#410864 = CIRCLE('',#410865,0.135001418495); +#410865 = AXIS2_PLACEMENT_3D('',#410866,#410867,#410868); +#410866 = CARTESIAN_POINT('',(125.13499858151,-124.1849985815,0.)); +#410867 = DIRECTION('',(0.,0.,-1.)); +#410868 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#410869 = CYLINDRICAL_SURFACE('',#410870,0.135001418495); +#410870 = AXIS2_PLACEMENT_3D('',#410871,#410872,#410873); +#410871 = CARTESIAN_POINT('',(125.13499858151,-124.1849985815,0.)); +#410872 = DIRECTION('',(-0.,-0.,1.)); +#410873 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#410874 = ADVANCED_FACE('',(#410875),#410900,.F.); +#410875 = FACE_BOUND('',#410876,.F.); +#410876 = EDGE_LOOP('',(#410877,#410878,#410886,#410894)); +#410877 = ORIENTED_EDGE('',*,*,#410855,.T.); +#410878 = ORIENTED_EDGE('',*,*,#410879,.T.); +#410879 = EDGE_CURVE('',#410847,#410880,#410882,.T.); +#410880 = VERTEX_POINT('',#410881); +#410881 = CARTESIAN_POINT('',(124.865,-124.32,-4.E-02)); +#410882 = LINE('',#410883,#410884); +#410883 = CARTESIAN_POINT('',(125.135,-124.32,-4.E-02)); +#410884 = VECTOR('',#410885,1.); +#410885 = DIRECTION('',(-1.,0.,0.)); +#410886 = ORIENTED_EDGE('',*,*,#410887,.F.); +#410887 = EDGE_CURVE('',#410888,#410880,#410890,.T.); +#410888 = VERTEX_POINT('',#410889); +#410889 = CARTESIAN_POINT('',(124.865,-124.32,0.)); +#410890 = LINE('',#410891,#410892); +#410891 = CARTESIAN_POINT('',(124.865,-124.32,0.)); +#410892 = VECTOR('',#410893,1.); +#410893 = DIRECTION('',(0.,0.,-1.)); +#410894 = ORIENTED_EDGE('',*,*,#410895,.F.); +#410895 = EDGE_CURVE('',#410856,#410888,#410896,.T.); +#410896 = LINE('',#410897,#410898); +#410897 = CARTESIAN_POINT('',(125.135,-124.32,0.)); +#410898 = VECTOR('',#410899,1.); +#410899 = DIRECTION('',(-1.,0.,0.)); +#410900 = PLANE('',#410901); +#410901 = AXIS2_PLACEMENT_3D('',#410902,#410903,#410904); +#410902 = CARTESIAN_POINT('',(125.135,-124.32,0.)); +#410903 = DIRECTION('',(0.,1.,0.)); +#410904 = DIRECTION('',(-1.,0.,0.)); +#410905 = ADVANCED_FACE('',(#410906),#410933,.T.); +#410906 = FACE_BOUND('',#410907,.F.); +#410907 = EDGE_LOOP('',(#410908,#410909,#410918,#410926)); +#410908 = ORIENTED_EDGE('',*,*,#410887,.T.); +#410909 = ORIENTED_EDGE('',*,*,#410910,.T.); +#410910 = EDGE_CURVE('',#410880,#410911,#410913,.T.); +#410911 = VERTEX_POINT('',#410912); +#410912 = CARTESIAN_POINT('',(124.73,-124.185,-4.E-02)); +#410913 = CIRCLE('',#410914,0.135001418495); +#410914 = AXIS2_PLACEMENT_3D('',#410915,#410916,#410917); +#410915 = CARTESIAN_POINT('',(124.86500141848,-124.1849985815,-4.E-02)); +#410916 = DIRECTION('',(0.,0.,-1.)); +#410917 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#410918 = ORIENTED_EDGE('',*,*,#410919,.F.); +#410919 = EDGE_CURVE('',#410920,#410911,#410922,.T.); +#410920 = VERTEX_POINT('',#410921); +#410921 = CARTESIAN_POINT('',(124.73,-124.185,0.)); +#410922 = LINE('',#410923,#410924); +#410923 = CARTESIAN_POINT('',(124.73,-124.185,0.)); +#410924 = VECTOR('',#410925,1.); +#410925 = DIRECTION('',(0.,0.,-1.)); +#410926 = ORIENTED_EDGE('',*,*,#410927,.F.); +#410927 = EDGE_CURVE('',#410888,#410920,#410928,.T.); +#410928 = CIRCLE('',#410929,0.135001418495); +#410929 = AXIS2_PLACEMENT_3D('',#410930,#410931,#410932); +#410930 = CARTESIAN_POINT('',(124.86500141848,-124.1849985815,0.)); +#410931 = DIRECTION('',(0.,0.,-1.)); +#410932 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#410933 = CYLINDRICAL_SURFACE('',#410934,0.135001418495); +#410934 = AXIS2_PLACEMENT_3D('',#410935,#410936,#410937); +#410935 = CARTESIAN_POINT('',(124.86500141848,-124.1849985815,0.)); +#410936 = DIRECTION('',(-0.,-0.,1.)); +#410937 = DIRECTION('',(-1.050720662156E-05,-0.999999999945,-0.)); +#410938 = ADVANCED_FACE('',(#410939),#410955,.F.); +#410939 = FACE_BOUND('',#410940,.F.); +#410940 = EDGE_LOOP('',(#410941,#410942,#410948,#410949)); +#410941 = ORIENTED_EDGE('',*,*,#410919,.T.); +#410942 = ORIENTED_EDGE('',*,*,#410943,.T.); +#410943 = EDGE_CURVE('',#410911,#410711,#410944,.T.); +#410944 = LINE('',#410945,#410946); +#410945 = CARTESIAN_POINT('',(124.73,-124.185,-4.E-02)); +#410946 = VECTOR('',#410947,1.); +#410947 = DIRECTION('',(0.,1.,0.)); +#410948 = ORIENTED_EDGE('',*,*,#410708,.F.); +#410949 = ORIENTED_EDGE('',*,*,#410950,.F.); +#410950 = EDGE_CURVE('',#410920,#410709,#410951,.T.); +#410951 = LINE('',#410952,#410953); +#410952 = CARTESIAN_POINT('',(124.73,-124.185,0.)); +#410953 = VECTOR('',#410954,1.); +#410954 = DIRECTION('',(0.,1.,0.)); +#410955 = PLANE('',#410956); +#410956 = AXIS2_PLACEMENT_3D('',#410957,#410958,#410959); +#410957 = CARTESIAN_POINT('',(124.73,-124.185,0.)); +#410958 = DIRECTION('',(1.,-0.,0.)); +#410959 = DIRECTION('',(0.,1.,0.)); +#410960 = ADVANCED_FACE('',(#410961),#410971,.F.); +#410961 = FACE_BOUND('',#410962,.F.); +#410962 = EDGE_LOOP('',(#410963,#410964,#410965,#410966,#410967,#410968, + #410969,#410970)); +#410963 = ORIENTED_EDGE('',*,*,#410735,.T.); +#410964 = ORIENTED_EDGE('',*,*,#410767,.T.); +#410965 = ORIENTED_EDGE('',*,*,#410799,.T.); +#410966 = ORIENTED_EDGE('',*,*,#410831,.T.); +#410967 = ORIENTED_EDGE('',*,*,#410863,.T.); +#410968 = ORIENTED_EDGE('',*,*,#410895,.T.); +#410969 = ORIENTED_EDGE('',*,*,#410927,.T.); +#410970 = ORIENTED_EDGE('',*,*,#410950,.T.); +#410971 = PLANE('',#410972); +#410972 = AXIS2_PLACEMENT_3D('',#410973,#410974,#410975); +#410973 = CARTESIAN_POINT('',(0.,0.,0.)); +#410974 = DIRECTION('',(-0.,-0.,-1.)); +#410975 = DIRECTION('',(-1.,0.,0.)); +#410976 = ADVANCED_FACE('',(#410977),#410987,.T.); +#410977 = FACE_BOUND('',#410978,.T.); +#410978 = EDGE_LOOP('',(#410979,#410980,#410981,#410982,#410983,#410984, + #410985,#410986)); +#410979 = ORIENTED_EDGE('',*,*,#410718,.T.); +#410980 = ORIENTED_EDGE('',*,*,#410751,.T.); +#410981 = ORIENTED_EDGE('',*,*,#410782,.T.); +#410982 = ORIENTED_EDGE('',*,*,#410815,.T.); +#410983 = ORIENTED_EDGE('',*,*,#410846,.T.); +#410984 = ORIENTED_EDGE('',*,*,#410879,.T.); +#410985 = ORIENTED_EDGE('',*,*,#410910,.T.); +#410986 = ORIENTED_EDGE('',*,*,#410943,.T.); +#410987 = PLANE('',#410988); +#410988 = AXIS2_PLACEMENT_3D('',#410989,#410990,#410991); +#410989 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#410990 = DIRECTION('',(-0.,-0.,-1.)); +#410991 = DIRECTION('',(-1.,0.,0.)); +#410992 = MANIFOLD_SOLID_BREP('',#410993); +#410993 = CLOSED_SHELL('',(#410994,#411036,#411067,#411098,#411161, + #411224,#411241,#411258,#411275,#411292,#411304)); +#410994 = ADVANCED_FACE('',(#410995),#411031,.T.); +#410995 = FACE_BOUND('',#410996,.T.); +#410996 = EDGE_LOOP('',(#410997,#411007,#411016,#411024)); +#410997 = ORIENTED_EDGE('',*,*,#410998,.T.); +#410998 = EDGE_CURVE('',#410999,#411001,#411003,.T.); +#410999 = VERTEX_POINT('',#411000); +#411000 = CARTESIAN_POINT('',(151.9,-76.875,1.51)); +#411001 = VERTEX_POINT('',#411002); +#411002 = CARTESIAN_POINT('',(151.9,-76.875,1.55)); +#411003 = LINE('',#411004,#411005); +#411004 = CARTESIAN_POINT('',(151.9,-76.875,1.51)); +#411005 = VECTOR('',#411006,1.); +#411006 = DIRECTION('',(0.,0.,1.)); +#411007 = ORIENTED_EDGE('',*,*,#411008,.T.); +#411008 = EDGE_CURVE('',#411001,#411009,#411011,.T.); +#411009 = VERTEX_POINT('',#411010); +#411010 = CARTESIAN_POINT('',(152.15,-76.625,1.55)); +#411011 = CIRCLE('',#411012,0.249998959685); +#411012 = AXIS2_PLACEMENT_3D('',#411013,#411014,#411015); +#411013 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,1.55)); +#411014 = DIRECTION('',(0.,0.,-1.)); +#411015 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411016 = ORIENTED_EDGE('',*,*,#411017,.F.); +#411017 = EDGE_CURVE('',#411018,#411009,#411020,.T.); +#411018 = VERTEX_POINT('',#411019); +#411019 = CARTESIAN_POINT('',(152.15,-76.625,1.51)); +#411020 = LINE('',#411021,#411022); +#411021 = CARTESIAN_POINT('',(152.15,-76.625,1.51)); +#411022 = VECTOR('',#411023,1.); +#411023 = DIRECTION('',(0.,0.,1.)); +#411024 = ORIENTED_EDGE('',*,*,#411025,.F.); +#411025 = EDGE_CURVE('',#410999,#411018,#411026,.T.); +#411026 = CIRCLE('',#411027,0.249998959685); +#411027 = AXIS2_PLACEMENT_3D('',#411028,#411029,#411030); +#411028 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,1.51)); +#411029 = DIRECTION('',(0.,0.,-1.)); +#411030 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411031 = CYLINDRICAL_SURFACE('',#411032,0.249998959685); +#411032 = AXIS2_PLACEMENT_3D('',#411033,#411034,#411035); +#411033 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,1.51)); +#411034 = DIRECTION('',(0.,0.,-1.)); +#411035 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411036 = ADVANCED_FACE('',(#411037),#411062,.T.); +#411037 = FACE_BOUND('',#411038,.T.); +#411038 = EDGE_LOOP('',(#411039,#411049,#411055,#411056)); +#411039 = ORIENTED_EDGE('',*,*,#411040,.T.); +#411040 = EDGE_CURVE('',#411041,#411043,#411045,.T.); +#411041 = VERTEX_POINT('',#411042); +#411042 = CARTESIAN_POINT('',(151.9,-78.125,1.51)); +#411043 = VERTEX_POINT('',#411044); +#411044 = CARTESIAN_POINT('',(151.9,-78.125,1.55)); +#411045 = LINE('',#411046,#411047); +#411046 = CARTESIAN_POINT('',(151.9,-78.125,1.51)); +#411047 = VECTOR('',#411048,1.); +#411048 = DIRECTION('',(0.,0.,1.)); +#411049 = ORIENTED_EDGE('',*,*,#411050,.T.); +#411050 = EDGE_CURVE('',#411043,#411001,#411051,.T.); +#411051 = LINE('',#411052,#411053); +#411052 = CARTESIAN_POINT('',(151.9,-78.125,1.55)); +#411053 = VECTOR('',#411054,1.); +#411054 = DIRECTION('',(0.,1.,0.)); +#411055 = ORIENTED_EDGE('',*,*,#410998,.F.); +#411056 = ORIENTED_EDGE('',*,*,#411057,.F.); +#411057 = EDGE_CURVE('',#411041,#410999,#411058,.T.); +#411058 = LINE('',#411059,#411060); +#411059 = CARTESIAN_POINT('',(151.9,-78.125,1.51)); +#411060 = VECTOR('',#411061,1.); +#411061 = DIRECTION('',(0.,1.,0.)); +#411062 = PLANE('',#411063); +#411063 = AXIS2_PLACEMENT_3D('',#411064,#411065,#411066); +#411064 = CARTESIAN_POINT('',(151.9,-78.125,1.51)); +#411065 = DIRECTION('',(-1.,0.,0.)); +#411066 = DIRECTION('',(0.,1.,0.)); +#411067 = ADVANCED_FACE('',(#411068),#411093,.T.); +#411068 = FACE_BOUND('',#411069,.T.); +#411069 = EDGE_LOOP('',(#411070,#411071,#411079,#411087)); +#411070 = ORIENTED_EDGE('',*,*,#411017,.T.); +#411071 = ORIENTED_EDGE('',*,*,#411072,.T.); +#411072 = EDGE_CURVE('',#411009,#411073,#411075,.T.); +#411073 = VERTEX_POINT('',#411074); +#411074 = CARTESIAN_POINT('',(152.85,-76.625,1.55)); +#411075 = LINE('',#411076,#411077); +#411076 = CARTESIAN_POINT('',(152.15,-76.625,1.55)); +#411077 = VECTOR('',#411078,1.); +#411078 = DIRECTION('',(1.,0.,0.)); +#411079 = ORIENTED_EDGE('',*,*,#411080,.F.); +#411080 = EDGE_CURVE('',#411081,#411073,#411083,.T.); +#411081 = VERTEX_POINT('',#411082); +#411082 = CARTESIAN_POINT('',(152.85,-76.625,1.51)); +#411083 = LINE('',#411084,#411085); +#411084 = CARTESIAN_POINT('',(152.85,-76.625,1.51)); +#411085 = VECTOR('',#411086,1.); +#411086 = DIRECTION('',(0.,0.,1.)); +#411087 = ORIENTED_EDGE('',*,*,#411088,.F.); +#411088 = EDGE_CURVE('',#411018,#411081,#411089,.T.); +#411089 = LINE('',#411090,#411091); +#411090 = CARTESIAN_POINT('',(152.15,-76.625,1.51)); +#411091 = VECTOR('',#411092,1.); +#411092 = DIRECTION('',(1.,0.,0.)); +#411093 = PLANE('',#411094); +#411094 = AXIS2_PLACEMENT_3D('',#411095,#411096,#411097); +#411095 = CARTESIAN_POINT('',(152.15,-76.625,1.51)); +#411096 = DIRECTION('',(0.,1.,0.)); +#411097 = DIRECTION('',(1.,0.,0.)); +#411098 = ADVANCED_FACE('',(#411099,#411145),#411156,.F.); +#411099 = FACE_BOUND('',#411100,.F.); +#411100 = EDGE_LOOP('',(#411101,#411102,#411103,#411112,#411120,#411129, + #411137,#411144)); +#411101 = ORIENTED_EDGE('',*,*,#411025,.F.); +#411102 = ORIENTED_EDGE('',*,*,#411057,.F.); +#411103 = ORIENTED_EDGE('',*,*,#411104,.F.); +#411104 = EDGE_CURVE('',#411105,#411041,#411107,.T.); +#411105 = VERTEX_POINT('',#411106); +#411106 = CARTESIAN_POINT('',(152.15,-78.375,1.51)); +#411107 = CIRCLE('',#411108,0.249998959685); +#411108 = AXIS2_PLACEMENT_3D('',#411109,#411110,#411111); +#411109 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,1.51)); +#411110 = DIRECTION('',(0.,0.,-1.)); +#411111 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411112 = ORIENTED_EDGE('',*,*,#411113,.F.); +#411113 = EDGE_CURVE('',#411114,#411105,#411116,.T.); +#411114 = VERTEX_POINT('',#411115); +#411115 = CARTESIAN_POINT('',(152.85,-78.375,1.51)); +#411116 = LINE('',#411117,#411118); +#411117 = CARTESIAN_POINT('',(152.85,-78.375,1.51)); +#411118 = VECTOR('',#411119,1.); +#411119 = DIRECTION('',(-1.,0.,0.)); +#411120 = ORIENTED_EDGE('',*,*,#411121,.F.); +#411121 = EDGE_CURVE('',#411122,#411114,#411124,.T.); +#411122 = VERTEX_POINT('',#411123); +#411123 = CARTESIAN_POINT('',(153.1,-78.125,1.51)); +#411124 = CIRCLE('',#411125,0.249998959685); +#411125 = AXIS2_PLACEMENT_3D('',#411126,#411127,#411128); +#411126 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,1.51)); +#411127 = DIRECTION('',(0.,0.,-1.)); +#411128 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411129 = ORIENTED_EDGE('',*,*,#411130,.F.); +#411130 = EDGE_CURVE('',#411131,#411122,#411133,.T.); +#411131 = VERTEX_POINT('',#411132); +#411132 = CARTESIAN_POINT('',(153.1,-76.875,1.51)); +#411133 = LINE('',#411134,#411135); +#411134 = CARTESIAN_POINT('',(153.1,-76.875,1.51)); +#411135 = VECTOR('',#411136,1.); +#411136 = DIRECTION('',(0.,-1.,0.)); +#411137 = ORIENTED_EDGE('',*,*,#411138,.F.); +#411138 = EDGE_CURVE('',#411081,#411131,#411139,.T.); +#411139 = CIRCLE('',#411140,0.249998959685); +#411140 = AXIS2_PLACEMENT_3D('',#411141,#411142,#411143); +#411141 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,1.51)); +#411142 = DIRECTION('',(0.,0.,-1.)); +#411143 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411144 = ORIENTED_EDGE('',*,*,#411088,.F.); +#411145 = FACE_BOUND('',#411146,.F.); +#411146 = EDGE_LOOP('',(#411147)); +#411147 = ORIENTED_EDGE('',*,*,#411148,.T.); +#411148 = EDGE_CURVE('',#411149,#411149,#411151,.T.); +#411149 = VERTEX_POINT('',#411150); +#411150 = CARTESIAN_POINT('',(152.5,-77.85,1.51)); +#411151 = CIRCLE('',#411152,0.35); +#411152 = AXIS2_PLACEMENT_3D('',#411153,#411154,#411155); +#411153 = CARTESIAN_POINT('',(152.5,-77.5,1.51)); +#411154 = DIRECTION('',(-0.,0.,-1.)); +#411155 = DIRECTION('',(-0.,-1.,0.)); +#411156 = PLANE('',#411157); +#411157 = AXIS2_PLACEMENT_3D('',#411158,#411159,#411160); +#411158 = CARTESIAN_POINT('',(0.,0.,1.51)); +#411159 = DIRECTION('',(0.,0.,1.)); +#411160 = DIRECTION('',(1.,0.,-0.)); +#411161 = ADVANCED_FACE('',(#411162,#411208),#411219,.T.); +#411162 = FACE_BOUND('',#411163,.T.); +#411163 = EDGE_LOOP('',(#411164,#411165,#411166,#411175,#411183,#411192, + #411200,#411207)); +#411164 = ORIENTED_EDGE('',*,*,#411008,.F.); +#411165 = ORIENTED_EDGE('',*,*,#411050,.F.); +#411166 = ORIENTED_EDGE('',*,*,#411167,.F.); +#411167 = EDGE_CURVE('',#411168,#411043,#411170,.T.); +#411168 = VERTEX_POINT('',#411169); +#411169 = CARTESIAN_POINT('',(152.15,-78.375,1.55)); +#411170 = CIRCLE('',#411171,0.249998959685); +#411171 = AXIS2_PLACEMENT_3D('',#411172,#411173,#411174); +#411172 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,1.55)); +#411173 = DIRECTION('',(0.,0.,-1.)); +#411174 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411175 = ORIENTED_EDGE('',*,*,#411176,.F.); +#411176 = EDGE_CURVE('',#411177,#411168,#411179,.T.); +#411177 = VERTEX_POINT('',#411178); +#411178 = CARTESIAN_POINT('',(152.85,-78.375,1.55)); +#411179 = LINE('',#411180,#411181); +#411180 = CARTESIAN_POINT('',(152.85,-78.375,1.55)); +#411181 = VECTOR('',#411182,1.); +#411182 = DIRECTION('',(-1.,0.,0.)); +#411183 = ORIENTED_EDGE('',*,*,#411184,.F.); +#411184 = EDGE_CURVE('',#411185,#411177,#411187,.T.); +#411185 = VERTEX_POINT('',#411186); +#411186 = CARTESIAN_POINT('',(153.1,-78.125,1.55)); +#411187 = CIRCLE('',#411188,0.249998959685); +#411188 = AXIS2_PLACEMENT_3D('',#411189,#411190,#411191); +#411189 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,1.55)); +#411190 = DIRECTION('',(0.,0.,-1.)); +#411191 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411192 = ORIENTED_EDGE('',*,*,#411193,.F.); +#411193 = EDGE_CURVE('',#411194,#411185,#411196,.T.); +#411194 = VERTEX_POINT('',#411195); +#411195 = CARTESIAN_POINT('',(153.1,-76.875,1.55)); +#411196 = LINE('',#411197,#411198); +#411197 = CARTESIAN_POINT('',(153.1,-76.875,1.55)); +#411198 = VECTOR('',#411199,1.); +#411199 = DIRECTION('',(0.,-1.,0.)); +#411200 = ORIENTED_EDGE('',*,*,#411201,.F.); +#411201 = EDGE_CURVE('',#411073,#411194,#411202,.T.); +#411202 = CIRCLE('',#411203,0.249998959685); +#411203 = AXIS2_PLACEMENT_3D('',#411204,#411205,#411206); +#411204 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,1.55)); +#411205 = DIRECTION('',(0.,0.,-1.)); +#411206 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411207 = ORIENTED_EDGE('',*,*,#411072,.F.); +#411208 = FACE_BOUND('',#411209,.T.); +#411209 = EDGE_LOOP('',(#411210)); +#411210 = ORIENTED_EDGE('',*,*,#411211,.T.); +#411211 = EDGE_CURVE('',#411212,#411212,#411214,.T.); +#411212 = VERTEX_POINT('',#411213); +#411213 = CARTESIAN_POINT('',(152.5,-77.85,1.55)); +#411214 = CIRCLE('',#411215,0.35); +#411215 = AXIS2_PLACEMENT_3D('',#411216,#411217,#411218); +#411216 = CARTESIAN_POINT('',(152.5,-77.5,1.55)); +#411217 = DIRECTION('',(-0.,0.,-1.)); +#411218 = DIRECTION('',(-0.,-1.,0.)); +#411219 = PLANE('',#411220); +#411220 = AXIS2_PLACEMENT_3D('',#411221,#411222,#411223); +#411221 = CARTESIAN_POINT('',(0.,0.,1.55)); +#411222 = DIRECTION('',(0.,0.,1.)); +#411223 = DIRECTION('',(1.,0.,-0.)); +#411224 = ADVANCED_FACE('',(#411225),#411236,.T.); +#411225 = FACE_BOUND('',#411226,.T.); +#411226 = EDGE_LOOP('',(#411227,#411233,#411234,#411235)); +#411227 = ORIENTED_EDGE('',*,*,#411228,.T.); +#411228 = EDGE_CURVE('',#411105,#411168,#411229,.T.); +#411229 = LINE('',#411230,#411231); +#411230 = CARTESIAN_POINT('',(152.15,-78.375,1.51)); +#411231 = VECTOR('',#411232,1.); +#411232 = DIRECTION('',(0.,0.,1.)); +#411233 = ORIENTED_EDGE('',*,*,#411167,.T.); +#411234 = ORIENTED_EDGE('',*,*,#411040,.F.); +#411235 = ORIENTED_EDGE('',*,*,#411104,.F.); +#411236 = CYLINDRICAL_SURFACE('',#411237,0.249998959685); +#411237 = AXIS2_PLACEMENT_3D('',#411238,#411239,#411240); +#411238 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,1.51)); +#411239 = DIRECTION('',(0.,0.,-1.)); +#411240 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411241 = ADVANCED_FACE('',(#411242),#411253,.T.); +#411242 = FACE_BOUND('',#411243,.T.); +#411243 = EDGE_LOOP('',(#411244,#411245,#411246,#411252)); +#411244 = ORIENTED_EDGE('',*,*,#411080,.T.); +#411245 = ORIENTED_EDGE('',*,*,#411201,.T.); +#411246 = ORIENTED_EDGE('',*,*,#411247,.F.); +#411247 = EDGE_CURVE('',#411131,#411194,#411248,.T.); +#411248 = LINE('',#411249,#411250); +#411249 = CARTESIAN_POINT('',(153.1,-76.875,1.51)); +#411250 = VECTOR('',#411251,1.); +#411251 = DIRECTION('',(0.,0.,1.)); +#411252 = ORIENTED_EDGE('',*,*,#411138,.F.); +#411253 = CYLINDRICAL_SURFACE('',#411254,0.249998959685); +#411254 = AXIS2_PLACEMENT_3D('',#411255,#411256,#411257); +#411255 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,1.51)); +#411256 = DIRECTION('',(0.,0.,-1.)); +#411257 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411258 = ADVANCED_FACE('',(#411259),#411270,.T.); +#411259 = FACE_BOUND('',#411260,.T.); +#411260 = EDGE_LOOP('',(#411261,#411267,#411268,#411269)); +#411261 = ORIENTED_EDGE('',*,*,#411262,.T.); +#411262 = EDGE_CURVE('',#411114,#411177,#411263,.T.); +#411263 = LINE('',#411264,#411265); +#411264 = CARTESIAN_POINT('',(152.85,-78.375,1.51)); +#411265 = VECTOR('',#411266,1.); +#411266 = DIRECTION('',(0.,0.,1.)); +#411267 = ORIENTED_EDGE('',*,*,#411176,.T.); +#411268 = ORIENTED_EDGE('',*,*,#411228,.F.); +#411269 = ORIENTED_EDGE('',*,*,#411113,.F.); +#411270 = PLANE('',#411271); +#411271 = AXIS2_PLACEMENT_3D('',#411272,#411273,#411274); +#411272 = CARTESIAN_POINT('',(152.85,-78.375,1.51)); +#411273 = DIRECTION('',(0.,-1.,0.)); +#411274 = DIRECTION('',(-1.,0.,0.)); +#411275 = ADVANCED_FACE('',(#411276),#411287,.T.); +#411276 = FACE_BOUND('',#411277,.T.); +#411277 = EDGE_LOOP('',(#411278,#411279,#411280,#411286)); +#411278 = ORIENTED_EDGE('',*,*,#411247,.T.); +#411279 = ORIENTED_EDGE('',*,*,#411193,.T.); +#411280 = ORIENTED_EDGE('',*,*,#411281,.F.); +#411281 = EDGE_CURVE('',#411122,#411185,#411282,.T.); +#411282 = LINE('',#411283,#411284); +#411283 = CARTESIAN_POINT('',(153.1,-78.125,1.51)); +#411284 = VECTOR('',#411285,1.); +#411285 = DIRECTION('',(0.,0.,1.)); +#411286 = ORIENTED_EDGE('',*,*,#411130,.F.); +#411287 = PLANE('',#411288); +#411288 = AXIS2_PLACEMENT_3D('',#411289,#411290,#411291); +#411289 = CARTESIAN_POINT('',(153.1,-76.875,1.51)); +#411290 = DIRECTION('',(1.,0.,-0.)); +#411291 = DIRECTION('',(0.,-1.,0.)); +#411292 = ADVANCED_FACE('',(#411293),#411299,.T.); +#411293 = FACE_BOUND('',#411294,.T.); +#411294 = EDGE_LOOP('',(#411295,#411296,#411297,#411298)); +#411295 = ORIENTED_EDGE('',*,*,#411281,.T.); +#411296 = ORIENTED_EDGE('',*,*,#411184,.T.); +#411297 = ORIENTED_EDGE('',*,*,#411262,.F.); +#411298 = ORIENTED_EDGE('',*,*,#411121,.F.); +#411299 = CYLINDRICAL_SURFACE('',#411300,0.249998959685); +#411300 = AXIS2_PLACEMENT_3D('',#411301,#411302,#411303); +#411301 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,1.51)); +#411302 = DIRECTION('',(0.,0.,-1.)); +#411303 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411304 = ADVANCED_FACE('',(#411305),#411316,.F.); +#411305 = FACE_BOUND('',#411306,.T.); +#411306 = EDGE_LOOP('',(#411307,#411308,#411314,#411315)); +#411307 = ORIENTED_EDGE('',*,*,#411148,.T.); +#411308 = ORIENTED_EDGE('',*,*,#411309,.T.); +#411309 = EDGE_CURVE('',#411149,#411212,#411310,.T.); +#411310 = LINE('',#411311,#411312); +#411311 = CARTESIAN_POINT('',(152.5,-77.85,-4.6E-02)); +#411312 = VECTOR('',#411313,1.); +#411313 = DIRECTION('',(0.,0.,1.)); +#411314 = ORIENTED_EDGE('',*,*,#411211,.F.); +#411315 = ORIENTED_EDGE('',*,*,#411309,.F.); +#411316 = CYLINDRICAL_SURFACE('',#411317,0.35); +#411317 = AXIS2_PLACEMENT_3D('',#411318,#411319,#411320); +#411318 = CARTESIAN_POINT('',(152.5,-77.5,-4.6E-02)); +#411319 = DIRECTION('',(-0.,-0.,-1.)); +#411320 = DIRECTION('',(-0.,-1.,0.)); +#411321 = MANIFOLD_SOLID_BREP('',#411322); +#411322 = CLOSED_SHELL('',(#411323,#411365,#411396,#411427,#411490, + #411553,#411570,#411587,#411604,#411621,#411633)); +#411323 = ADVANCED_FACE('',(#411324),#411360,.T.); +#411324 = FACE_BOUND('',#411325,.F.); +#411325 = EDGE_LOOP('',(#411326,#411336,#411345,#411353)); +#411326 = ORIENTED_EDGE('',*,*,#411327,.T.); +#411327 = EDGE_CURVE('',#411328,#411330,#411332,.T.); +#411328 = VERTEX_POINT('',#411329); +#411329 = CARTESIAN_POINT('',(151.9,-76.875,0.)); +#411330 = VERTEX_POINT('',#411331); +#411331 = CARTESIAN_POINT('',(151.9,-76.875,-4.E-02)); +#411332 = LINE('',#411333,#411334); +#411333 = CARTESIAN_POINT('',(151.9,-76.875,0.)); +#411334 = VECTOR('',#411335,1.); +#411335 = DIRECTION('',(0.,0.,-1.)); +#411336 = ORIENTED_EDGE('',*,*,#411337,.T.); +#411337 = EDGE_CURVE('',#411330,#411338,#411340,.T.); +#411338 = VERTEX_POINT('',#411339); +#411339 = CARTESIAN_POINT('',(152.15,-76.625,-4.E-02)); +#411340 = CIRCLE('',#411341,0.249998959685); +#411341 = AXIS2_PLACEMENT_3D('',#411342,#411343,#411344); +#411342 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,-4.E-02)); +#411343 = DIRECTION('',(0.,0.,-1.)); +#411344 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411345 = ORIENTED_EDGE('',*,*,#411346,.F.); +#411346 = EDGE_CURVE('',#411347,#411338,#411349,.T.); +#411347 = VERTEX_POINT('',#411348); +#411348 = CARTESIAN_POINT('',(152.15,-76.625,0.)); +#411349 = LINE('',#411350,#411351); +#411350 = CARTESIAN_POINT('',(152.15,-76.625,0.)); +#411351 = VECTOR('',#411352,1.); +#411352 = DIRECTION('',(0.,0.,-1.)); +#411353 = ORIENTED_EDGE('',*,*,#411354,.F.); +#411354 = EDGE_CURVE('',#411328,#411347,#411355,.T.); +#411355 = CIRCLE('',#411356,0.249998959685); +#411356 = AXIS2_PLACEMENT_3D('',#411357,#411358,#411359); +#411357 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,0.)); +#411358 = DIRECTION('',(0.,0.,-1.)); +#411359 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411360 = CYLINDRICAL_SURFACE('',#411361,0.249998959685); +#411361 = AXIS2_PLACEMENT_3D('',#411362,#411363,#411364); +#411362 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,0.)); +#411363 = DIRECTION('',(-0.,-0.,1.)); +#411364 = DIRECTION('',(-0.999999999991,-4.161285950754E-06,-0.)); +#411365 = ADVANCED_FACE('',(#411366),#411391,.F.); +#411366 = FACE_BOUND('',#411367,.F.); +#411367 = EDGE_LOOP('',(#411368,#411378,#411384,#411385)); +#411368 = ORIENTED_EDGE('',*,*,#411369,.T.); +#411369 = EDGE_CURVE('',#411370,#411372,#411374,.T.); +#411370 = VERTEX_POINT('',#411371); +#411371 = CARTESIAN_POINT('',(151.9,-78.125,0.)); +#411372 = VERTEX_POINT('',#411373); +#411373 = CARTESIAN_POINT('',(151.9,-78.125,-4.E-02)); +#411374 = LINE('',#411375,#411376); +#411375 = CARTESIAN_POINT('',(151.9,-78.125,0.)); +#411376 = VECTOR('',#411377,1.); +#411377 = DIRECTION('',(0.,0.,-1.)); +#411378 = ORIENTED_EDGE('',*,*,#411379,.T.); +#411379 = EDGE_CURVE('',#411372,#411330,#411380,.T.); +#411380 = LINE('',#411381,#411382); +#411381 = CARTESIAN_POINT('',(151.9,-78.125,-4.E-02)); +#411382 = VECTOR('',#411383,1.); +#411383 = DIRECTION('',(0.,1.,0.)); +#411384 = ORIENTED_EDGE('',*,*,#411327,.F.); +#411385 = ORIENTED_EDGE('',*,*,#411386,.F.); +#411386 = EDGE_CURVE('',#411370,#411328,#411387,.T.); +#411387 = LINE('',#411388,#411389); +#411388 = CARTESIAN_POINT('',(151.9,-78.125,0.)); +#411389 = VECTOR('',#411390,1.); +#411390 = DIRECTION('',(0.,1.,0.)); +#411391 = PLANE('',#411392); +#411392 = AXIS2_PLACEMENT_3D('',#411393,#411394,#411395); +#411393 = CARTESIAN_POINT('',(151.9,-78.125,0.)); +#411394 = DIRECTION('',(1.,-0.,0.)); +#411395 = DIRECTION('',(0.,1.,0.)); +#411396 = ADVANCED_FACE('',(#411397),#411422,.F.); +#411397 = FACE_BOUND('',#411398,.F.); +#411398 = EDGE_LOOP('',(#411399,#411400,#411408,#411416)); +#411399 = ORIENTED_EDGE('',*,*,#411346,.T.); +#411400 = ORIENTED_EDGE('',*,*,#411401,.T.); +#411401 = EDGE_CURVE('',#411338,#411402,#411404,.T.); +#411402 = VERTEX_POINT('',#411403); +#411403 = CARTESIAN_POINT('',(152.85,-76.625,-4.E-02)); +#411404 = LINE('',#411405,#411406); +#411405 = CARTESIAN_POINT('',(152.15,-76.625,-4.E-02)); +#411406 = VECTOR('',#411407,1.); +#411407 = DIRECTION('',(1.,0.,0.)); +#411408 = ORIENTED_EDGE('',*,*,#411409,.F.); +#411409 = EDGE_CURVE('',#411410,#411402,#411412,.T.); +#411410 = VERTEX_POINT('',#411411); +#411411 = CARTESIAN_POINT('',(152.85,-76.625,0.)); +#411412 = LINE('',#411413,#411414); +#411413 = CARTESIAN_POINT('',(152.85,-76.625,0.)); +#411414 = VECTOR('',#411415,1.); +#411415 = DIRECTION('',(0.,0.,-1.)); +#411416 = ORIENTED_EDGE('',*,*,#411417,.F.); +#411417 = EDGE_CURVE('',#411347,#411410,#411418,.T.); +#411418 = LINE('',#411419,#411420); +#411419 = CARTESIAN_POINT('',(152.15,-76.625,0.)); +#411420 = VECTOR('',#411421,1.); +#411421 = DIRECTION('',(1.,0.,0.)); +#411422 = PLANE('',#411423); +#411423 = AXIS2_PLACEMENT_3D('',#411424,#411425,#411426); +#411424 = CARTESIAN_POINT('',(152.15,-76.625,0.)); +#411425 = DIRECTION('',(0.,-1.,0.)); +#411426 = DIRECTION('',(1.,0.,0.)); +#411427 = ADVANCED_FACE('',(#411428,#411474),#411485,.F.); +#411428 = FACE_BOUND('',#411429,.F.); +#411429 = EDGE_LOOP('',(#411430,#411431,#411432,#411441,#411449,#411458, + #411466,#411473)); +#411430 = ORIENTED_EDGE('',*,*,#411354,.T.); +#411431 = ORIENTED_EDGE('',*,*,#411417,.T.); +#411432 = ORIENTED_EDGE('',*,*,#411433,.T.); +#411433 = EDGE_CURVE('',#411410,#411434,#411436,.T.); +#411434 = VERTEX_POINT('',#411435); +#411435 = CARTESIAN_POINT('',(153.1,-76.875,0.)); +#411436 = CIRCLE('',#411437,0.249998959685); +#411437 = AXIS2_PLACEMENT_3D('',#411438,#411439,#411440); +#411438 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,0.)); +#411439 = DIRECTION('',(0.,0.,-1.)); +#411440 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411441 = ORIENTED_EDGE('',*,*,#411442,.T.); +#411442 = EDGE_CURVE('',#411434,#411443,#411445,.T.); +#411443 = VERTEX_POINT('',#411444); +#411444 = CARTESIAN_POINT('',(153.1,-78.125,0.)); +#411445 = LINE('',#411446,#411447); +#411446 = CARTESIAN_POINT('',(153.1,-76.875,0.)); +#411447 = VECTOR('',#411448,1.); +#411448 = DIRECTION('',(0.,-1.,0.)); +#411449 = ORIENTED_EDGE('',*,*,#411450,.T.); +#411450 = EDGE_CURVE('',#411443,#411451,#411453,.T.); +#411451 = VERTEX_POINT('',#411452); +#411452 = CARTESIAN_POINT('',(152.85,-78.375,0.)); +#411453 = CIRCLE('',#411454,0.249998959685); +#411454 = AXIS2_PLACEMENT_3D('',#411455,#411456,#411457); +#411455 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,0.)); +#411456 = DIRECTION('',(0.,0.,-1.)); +#411457 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411458 = ORIENTED_EDGE('',*,*,#411459,.T.); +#411459 = EDGE_CURVE('',#411451,#411460,#411462,.T.); +#411460 = VERTEX_POINT('',#411461); +#411461 = CARTESIAN_POINT('',(152.15,-78.375,0.)); +#411462 = LINE('',#411463,#411464); +#411463 = CARTESIAN_POINT('',(152.85,-78.375,0.)); +#411464 = VECTOR('',#411465,1.); +#411465 = DIRECTION('',(-1.,0.,0.)); +#411466 = ORIENTED_EDGE('',*,*,#411467,.T.); +#411467 = EDGE_CURVE('',#411460,#411370,#411468,.T.); +#411468 = CIRCLE('',#411469,0.249998959685); +#411469 = AXIS2_PLACEMENT_3D('',#411470,#411471,#411472); +#411470 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,0.)); +#411471 = DIRECTION('',(0.,0.,-1.)); +#411472 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411473 = ORIENTED_EDGE('',*,*,#411386,.T.); +#411474 = FACE_BOUND('',#411475,.F.); +#411475 = EDGE_LOOP('',(#411476)); +#411476 = ORIENTED_EDGE('',*,*,#411477,.F.); +#411477 = EDGE_CURVE('',#411478,#411478,#411480,.T.); +#411478 = VERTEX_POINT('',#411479); +#411479 = CARTESIAN_POINT('',(152.5,-77.85,0.)); +#411480 = CIRCLE('',#411481,0.35); +#411481 = AXIS2_PLACEMENT_3D('',#411482,#411483,#411484); +#411482 = CARTESIAN_POINT('',(152.5,-77.5,0.)); +#411483 = DIRECTION('',(-0.,0.,-1.)); +#411484 = DIRECTION('',(-0.,-1.,0.)); +#411485 = PLANE('',#411486); +#411486 = AXIS2_PLACEMENT_3D('',#411487,#411488,#411489); +#411487 = CARTESIAN_POINT('',(0.,0.,0.)); +#411488 = DIRECTION('',(-0.,-0.,-1.)); +#411489 = DIRECTION('',(-1.,0.,0.)); +#411490 = ADVANCED_FACE('',(#411491,#411537),#411548,.T.); +#411491 = FACE_BOUND('',#411492,.T.); +#411492 = EDGE_LOOP('',(#411493,#411494,#411495,#411504,#411512,#411521, + #411529,#411536)); +#411493 = ORIENTED_EDGE('',*,*,#411337,.T.); +#411494 = ORIENTED_EDGE('',*,*,#411401,.T.); +#411495 = ORIENTED_EDGE('',*,*,#411496,.T.); +#411496 = EDGE_CURVE('',#411402,#411497,#411499,.T.); +#411497 = VERTEX_POINT('',#411498); +#411498 = CARTESIAN_POINT('',(153.1,-76.875,-4.E-02)); +#411499 = CIRCLE('',#411500,0.249998959685); +#411500 = AXIS2_PLACEMENT_3D('',#411501,#411502,#411503); +#411501 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,-4.E-02)); +#411502 = DIRECTION('',(0.,0.,-1.)); +#411503 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411504 = ORIENTED_EDGE('',*,*,#411505,.T.); +#411505 = EDGE_CURVE('',#411497,#411506,#411508,.T.); +#411506 = VERTEX_POINT('',#411507); +#411507 = CARTESIAN_POINT('',(153.1,-78.125,-4.E-02)); +#411508 = LINE('',#411509,#411510); +#411509 = CARTESIAN_POINT('',(153.1,-76.875,-4.E-02)); +#411510 = VECTOR('',#411511,1.); +#411511 = DIRECTION('',(0.,-1.,0.)); +#411512 = ORIENTED_EDGE('',*,*,#411513,.T.); +#411513 = EDGE_CURVE('',#411506,#411514,#411516,.T.); +#411514 = VERTEX_POINT('',#411515); +#411515 = CARTESIAN_POINT('',(152.85,-78.375,-4.E-02)); +#411516 = CIRCLE('',#411517,0.249998959685); +#411517 = AXIS2_PLACEMENT_3D('',#411518,#411519,#411520); +#411518 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,-4.E-02)); +#411519 = DIRECTION('',(0.,0.,-1.)); +#411520 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411521 = ORIENTED_EDGE('',*,*,#411522,.T.); +#411522 = EDGE_CURVE('',#411514,#411523,#411525,.T.); +#411523 = VERTEX_POINT('',#411524); +#411524 = CARTESIAN_POINT('',(152.15,-78.375,-4.E-02)); +#411525 = LINE('',#411526,#411527); +#411526 = CARTESIAN_POINT('',(152.85,-78.375,-4.E-02)); +#411527 = VECTOR('',#411528,1.); +#411528 = DIRECTION('',(-1.,0.,0.)); +#411529 = ORIENTED_EDGE('',*,*,#411530,.T.); +#411530 = EDGE_CURVE('',#411523,#411372,#411531,.T.); +#411531 = CIRCLE('',#411532,0.249998959685); +#411532 = AXIS2_PLACEMENT_3D('',#411533,#411534,#411535); +#411533 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,-4.E-02)); +#411534 = DIRECTION('',(0.,0.,-1.)); +#411535 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411536 = ORIENTED_EDGE('',*,*,#411379,.T.); +#411537 = FACE_BOUND('',#411538,.T.); +#411538 = EDGE_LOOP('',(#411539)); +#411539 = ORIENTED_EDGE('',*,*,#411540,.F.); +#411540 = EDGE_CURVE('',#411541,#411541,#411543,.T.); +#411541 = VERTEX_POINT('',#411542); +#411542 = CARTESIAN_POINT('',(152.5,-77.85,-4.E-02)); +#411543 = CIRCLE('',#411544,0.35); +#411544 = AXIS2_PLACEMENT_3D('',#411545,#411546,#411547); +#411545 = CARTESIAN_POINT('',(152.5,-77.5,-4.E-02)); +#411546 = DIRECTION('',(-0.,0.,-1.)); +#411547 = DIRECTION('',(-0.,-1.,0.)); +#411548 = PLANE('',#411549); +#411549 = AXIS2_PLACEMENT_3D('',#411550,#411551,#411552); +#411550 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#411551 = DIRECTION('',(-0.,-0.,-1.)); +#411552 = DIRECTION('',(-1.,0.,0.)); +#411553 = ADVANCED_FACE('',(#411554),#411565,.T.); +#411554 = FACE_BOUND('',#411555,.F.); +#411555 = EDGE_LOOP('',(#411556,#411562,#411563,#411564)); +#411556 = ORIENTED_EDGE('',*,*,#411557,.T.); +#411557 = EDGE_CURVE('',#411460,#411523,#411558,.T.); +#411558 = LINE('',#411559,#411560); +#411559 = CARTESIAN_POINT('',(152.15,-78.375,0.)); +#411560 = VECTOR('',#411561,1.); +#411561 = DIRECTION('',(0.,0.,-1.)); +#411562 = ORIENTED_EDGE('',*,*,#411530,.T.); +#411563 = ORIENTED_EDGE('',*,*,#411369,.F.); +#411564 = ORIENTED_EDGE('',*,*,#411467,.F.); +#411565 = CYLINDRICAL_SURFACE('',#411566,0.249998959685); +#411566 = AXIS2_PLACEMENT_3D('',#411567,#411568,#411569); +#411567 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,0.)); +#411568 = DIRECTION('',(-0.,-0.,1.)); +#411569 = DIRECTION('',(4.161285950754E-06,-0.999999999991,0.)); +#411570 = ADVANCED_FACE('',(#411571),#411582,.T.); +#411571 = FACE_BOUND('',#411572,.F.); +#411572 = EDGE_LOOP('',(#411573,#411574,#411575,#411581)); +#411573 = ORIENTED_EDGE('',*,*,#411409,.T.); +#411574 = ORIENTED_EDGE('',*,*,#411496,.T.); +#411575 = ORIENTED_EDGE('',*,*,#411576,.F.); +#411576 = EDGE_CURVE('',#411434,#411497,#411577,.T.); +#411577 = LINE('',#411578,#411579); +#411578 = CARTESIAN_POINT('',(153.1,-76.875,0.)); +#411579 = VECTOR('',#411580,1.); +#411580 = DIRECTION('',(0.,0.,-1.)); +#411581 = ORIENTED_EDGE('',*,*,#411433,.F.); +#411582 = CYLINDRICAL_SURFACE('',#411583,0.249998959685); +#411583 = AXIS2_PLACEMENT_3D('',#411584,#411585,#411586); +#411584 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,0.)); +#411585 = DIRECTION('',(-0.,-0.,1.)); +#411586 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#411587 = ADVANCED_FACE('',(#411588),#411599,.F.); +#411588 = FACE_BOUND('',#411589,.F.); +#411589 = EDGE_LOOP('',(#411590,#411596,#411597,#411598)); +#411590 = ORIENTED_EDGE('',*,*,#411591,.T.); +#411591 = EDGE_CURVE('',#411451,#411514,#411592,.T.); +#411592 = LINE('',#411593,#411594); +#411593 = CARTESIAN_POINT('',(152.85,-78.375,0.)); +#411594 = VECTOR('',#411595,1.); +#411595 = DIRECTION('',(0.,0.,-1.)); +#411596 = ORIENTED_EDGE('',*,*,#411522,.T.); +#411597 = ORIENTED_EDGE('',*,*,#411557,.F.); +#411598 = ORIENTED_EDGE('',*,*,#411459,.F.); +#411599 = PLANE('',#411600); +#411600 = AXIS2_PLACEMENT_3D('',#411601,#411602,#411603); +#411601 = CARTESIAN_POINT('',(152.85,-78.375,0.)); +#411602 = DIRECTION('',(0.,1.,0.)); +#411603 = DIRECTION('',(-1.,0.,0.)); +#411604 = ADVANCED_FACE('',(#411605),#411616,.F.); +#411605 = FACE_BOUND('',#411606,.F.); +#411606 = EDGE_LOOP('',(#411607,#411608,#411609,#411615)); +#411607 = ORIENTED_EDGE('',*,*,#411576,.T.); +#411608 = ORIENTED_EDGE('',*,*,#411505,.T.); +#411609 = ORIENTED_EDGE('',*,*,#411610,.F.); +#411610 = EDGE_CURVE('',#411443,#411506,#411611,.T.); +#411611 = LINE('',#411612,#411613); +#411612 = CARTESIAN_POINT('',(153.1,-78.125,0.)); +#411613 = VECTOR('',#411614,1.); +#411614 = DIRECTION('',(0.,0.,-1.)); +#411615 = ORIENTED_EDGE('',*,*,#411442,.F.); +#411616 = PLANE('',#411617); +#411617 = AXIS2_PLACEMENT_3D('',#411618,#411619,#411620); +#411618 = CARTESIAN_POINT('',(153.1,-76.875,0.)); +#411619 = DIRECTION('',(-1.,-0.,-0.)); +#411620 = DIRECTION('',(0.,-1.,0.)); +#411621 = ADVANCED_FACE('',(#411622),#411628,.T.); +#411622 = FACE_BOUND('',#411623,.F.); +#411623 = EDGE_LOOP('',(#411624,#411625,#411626,#411627)); +#411624 = ORIENTED_EDGE('',*,*,#411610,.T.); +#411625 = ORIENTED_EDGE('',*,*,#411513,.T.); +#411626 = ORIENTED_EDGE('',*,*,#411591,.F.); +#411627 = ORIENTED_EDGE('',*,*,#411450,.F.); +#411628 = CYLINDRICAL_SURFACE('',#411629,0.249998959685); +#411629 = AXIS2_PLACEMENT_3D('',#411630,#411631,#411632); +#411630 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,0.)); +#411631 = DIRECTION('',(-0.,-0.,1.)); +#411632 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#411633 = ADVANCED_FACE('',(#411634),#411645,.F.); +#411634 = FACE_BOUND('',#411635,.T.); +#411635 = EDGE_LOOP('',(#411636,#411637,#411643,#411644)); +#411636 = ORIENTED_EDGE('',*,*,#411540,.T.); +#411637 = ORIENTED_EDGE('',*,*,#411638,.T.); +#411638 = EDGE_CURVE('',#411541,#411478,#411639,.T.); +#411639 = LINE('',#411640,#411641); +#411640 = CARTESIAN_POINT('',(152.5,-77.85,-4.6E-02)); +#411641 = VECTOR('',#411642,1.); +#411642 = DIRECTION('',(0.,0.,1.)); +#411643 = ORIENTED_EDGE('',*,*,#411477,.F.); +#411644 = ORIENTED_EDGE('',*,*,#411638,.F.); +#411645 = CYLINDRICAL_SURFACE('',#411646,0.35); +#411646 = AXIS2_PLACEMENT_3D('',#411647,#411648,#411649); +#411647 = CARTESIAN_POINT('',(152.5,-77.5,-4.6E-02)); +#411648 = DIRECTION('',(-0.,-0.,-1.)); +#411649 = DIRECTION('',(-0.,-1.,0.)); +#411650 = MANIFOLD_SOLID_BREP('',#411651); +#411651 = CLOSED_SHELL('',(#411652,#411685,#411705,#411725)); +#411652 = ADVANCED_FACE('',(#411653),#411680,.T.); +#411653 = FACE_BOUND('',#411654,.F.); +#411654 = EDGE_LOOP('',(#411655,#411665,#411672,#411673)); +#411655 = ORIENTED_EDGE('',*,*,#411656,.T.); +#411656 = EDGE_CURVE('',#411657,#411659,#411661,.T.); +#411657 = VERTEX_POINT('',#411658); +#411658 = CARTESIAN_POINT('',(152.5,-77.875,-4.E-02)); +#411659 = VERTEX_POINT('',#411660); +#411660 = CARTESIAN_POINT('',(152.5,-77.875,1.55)); +#411661 = LINE('',#411662,#411663); +#411662 = CARTESIAN_POINT('',(152.5,-77.875,-4.E-02)); +#411663 = VECTOR('',#411664,1.); +#411664 = DIRECTION('',(0.,0.,1.)); +#411665 = ORIENTED_EDGE('',*,*,#411666,.T.); +#411666 = EDGE_CURVE('',#411659,#411659,#411667,.T.); +#411667 = CIRCLE('',#411668,0.375); +#411668 = AXIS2_PLACEMENT_3D('',#411669,#411670,#411671); +#411669 = CARTESIAN_POINT('',(152.5,-77.5,1.55)); +#411670 = DIRECTION('',(0.,0.,1.)); +#411671 = DIRECTION('',(-0.,-1.,0.)); +#411672 = ORIENTED_EDGE('',*,*,#411656,.F.); +#411673 = ORIENTED_EDGE('',*,*,#411674,.F.); +#411674 = EDGE_CURVE('',#411657,#411657,#411675,.T.); +#411675 = CIRCLE('',#411676,0.375); +#411676 = AXIS2_PLACEMENT_3D('',#411677,#411678,#411679); +#411677 = CARTESIAN_POINT('',(152.5,-77.5,-4.E-02)); +#411678 = DIRECTION('',(0.,0.,1.)); +#411679 = DIRECTION('',(-0.,-1.,0.)); +#411680 = CYLINDRICAL_SURFACE('',#411681,0.375); +#411681 = AXIS2_PLACEMENT_3D('',#411682,#411683,#411684); +#411682 = CARTESIAN_POINT('',(152.5,-77.5,-4.E-02)); +#411683 = DIRECTION('',(-0.,-0.,-1.)); +#411684 = DIRECTION('',(-0.,-1.,0.)); +#411685 = ADVANCED_FACE('',(#411686,#411689),#411700,.F.); +#411686 = FACE_BOUND('',#411687,.F.); +#411687 = EDGE_LOOP('',(#411688)); +#411688 = ORIENTED_EDGE('',*,*,#411674,.T.); +#411689 = FACE_BOUND('',#411690,.F.); +#411690 = EDGE_LOOP('',(#411691)); +#411691 = ORIENTED_EDGE('',*,*,#411692,.T.); +#411692 = EDGE_CURVE('',#411693,#411693,#411695,.T.); +#411693 = VERTEX_POINT('',#411694); +#411694 = CARTESIAN_POINT('',(152.5,-77.85,-4.E-02)); +#411695 = CIRCLE('',#411696,0.35); +#411696 = AXIS2_PLACEMENT_3D('',#411697,#411698,#411699); +#411697 = CARTESIAN_POINT('',(152.5,-77.5,-4.E-02)); +#411698 = DIRECTION('',(-0.,0.,-1.)); +#411699 = DIRECTION('',(-0.,-1.,0.)); +#411700 = PLANE('',#411701); +#411701 = AXIS2_PLACEMENT_3D('',#411702,#411703,#411704); +#411702 = CARTESIAN_POINT('',(152.5,-77.875,-4.E-02)); +#411703 = DIRECTION('',(0.,0.,1.)); +#411704 = DIRECTION('',(1.,0.,-0.)); +#411705 = ADVANCED_FACE('',(#411706,#411709),#411720,.T.); +#411706 = FACE_BOUND('',#411707,.T.); +#411707 = EDGE_LOOP('',(#411708)); +#411708 = ORIENTED_EDGE('',*,*,#411666,.T.); +#411709 = FACE_BOUND('',#411710,.T.); +#411710 = EDGE_LOOP('',(#411711)); +#411711 = ORIENTED_EDGE('',*,*,#411712,.T.); +#411712 = EDGE_CURVE('',#411713,#411713,#411715,.T.); +#411713 = VERTEX_POINT('',#411714); +#411714 = CARTESIAN_POINT('',(152.5,-77.85,1.55)); +#411715 = CIRCLE('',#411716,0.35); +#411716 = AXIS2_PLACEMENT_3D('',#411717,#411718,#411719); +#411717 = CARTESIAN_POINT('',(152.5,-77.5,1.55)); +#411718 = DIRECTION('',(-0.,0.,-1.)); +#411719 = DIRECTION('',(-0.,-1.,0.)); +#411720 = PLANE('',#411721); +#411721 = AXIS2_PLACEMENT_3D('',#411722,#411723,#411724); +#411722 = CARTESIAN_POINT('',(152.5,-77.875,1.55)); +#411723 = DIRECTION('',(0.,0.,1.)); +#411724 = DIRECTION('',(1.,0.,-0.)); +#411725 = ADVANCED_FACE('',(#411726),#411737,.F.); +#411726 = FACE_BOUND('',#411727,.T.); +#411727 = EDGE_LOOP('',(#411728,#411729,#411735,#411736)); +#411728 = ORIENTED_EDGE('',*,*,#411692,.T.); +#411729 = ORIENTED_EDGE('',*,*,#411730,.T.); +#411730 = EDGE_CURVE('',#411693,#411713,#411731,.T.); +#411731 = LINE('',#411732,#411733); +#411732 = CARTESIAN_POINT('',(152.5,-77.85,-4.6E-02)); +#411733 = VECTOR('',#411734,1.); +#411734 = DIRECTION('',(0.,0.,1.)); +#411735 = ORIENTED_EDGE('',*,*,#411712,.F.); +#411736 = ORIENTED_EDGE('',*,*,#411730,.F.); +#411737 = CYLINDRICAL_SURFACE('',#411738,0.35); +#411738 = AXIS2_PLACEMENT_3D('',#411739,#411740,#411741); +#411739 = CARTESIAN_POINT('',(152.5,-77.5,-4.6E-02)); +#411740 = DIRECTION('',(-0.,-0.,-1.)); +#411741 = DIRECTION('',(-0.,-1.,0.)); +#411742 = MANIFOLD_SOLID_BREP('',#411743); +#411743 = CLOSED_SHELL('',(#411744,#411786,#411817,#411850,#411881, + #411914,#411945,#411978,#412000,#412016)); +#411744 = ADVANCED_FACE('',(#411745),#411781,.T.); +#411745 = FACE_BOUND('',#411746,.F.); +#411746 = EDGE_LOOP('',(#411747,#411757,#411766,#411774)); +#411747 = ORIENTED_EDGE('',*,*,#411748,.T.); +#411748 = EDGE_CURVE('',#411749,#411751,#411753,.T.); +#411749 = VERTEX_POINT('',#411750); +#411750 = CARTESIAN_POINT('',(136.,-120.025,0.)); +#411751 = VERTEX_POINT('',#411752); +#411752 = CARTESIAN_POINT('',(136.,-120.025,-4.E-02)); +#411753 = LINE('',#411754,#411755); +#411754 = CARTESIAN_POINT('',(136.,-120.025,0.)); +#411755 = VECTOR('',#411756,1.); +#411756 = DIRECTION('',(0.,0.,-1.)); +#411757 = ORIENTED_EDGE('',*,*,#411758,.T.); +#411758 = EDGE_CURVE('',#411751,#411759,#411761,.T.); +#411759 = VERTEX_POINT('',#411760); +#411760 = CARTESIAN_POINT('',(136.25,-119.775,-4.E-02)); +#411761 = CIRCLE('',#411762,0.249998959685); +#411762 = AXIS2_PLACEMENT_3D('',#411763,#411764,#411765); +#411763 = CARTESIAN_POINT('',(136.24999895968,-120.0249989596,-4.E-02)); +#411764 = DIRECTION('',(0.,0.,-1.)); +#411765 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#411766 = ORIENTED_EDGE('',*,*,#411767,.F.); +#411767 = EDGE_CURVE('',#411768,#411759,#411770,.T.); +#411768 = VERTEX_POINT('',#411769); +#411769 = CARTESIAN_POINT('',(136.25,-119.775,0.)); +#411770 = LINE('',#411771,#411772); +#411771 = CARTESIAN_POINT('',(136.25,-119.775,0.)); +#411772 = VECTOR('',#411773,1.); +#411773 = DIRECTION('',(0.,0.,-1.)); +#411774 = ORIENTED_EDGE('',*,*,#411775,.F.); +#411775 = EDGE_CURVE('',#411749,#411768,#411776,.T.); +#411776 = CIRCLE('',#411777,0.249998959685); +#411777 = AXIS2_PLACEMENT_3D('',#411778,#411779,#411780); +#411778 = CARTESIAN_POINT('',(136.24999895968,-120.0249989596,0.)); +#411779 = DIRECTION('',(0.,0.,-1.)); +#411780 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#411781 = CYLINDRICAL_SURFACE('',#411782,0.249998959685); +#411782 = AXIS2_PLACEMENT_3D('',#411783,#411784,#411785); +#411783 = CARTESIAN_POINT('',(136.24999895968,-120.0249989596,0.)); +#411784 = DIRECTION('',(-0.,-0.,1.)); +#411785 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#411786 = ADVANCED_FACE('',(#411787),#411812,.F.); +#411787 = FACE_BOUND('',#411788,.F.); +#411788 = EDGE_LOOP('',(#411789,#411790,#411798,#411806)); +#411789 = ORIENTED_EDGE('',*,*,#411767,.T.); +#411790 = ORIENTED_EDGE('',*,*,#411791,.T.); +#411791 = EDGE_CURVE('',#411759,#411792,#411794,.T.); +#411792 = VERTEX_POINT('',#411793); +#411793 = CARTESIAN_POINT('',(136.75,-119.775,-4.E-02)); +#411794 = LINE('',#411795,#411796); +#411795 = CARTESIAN_POINT('',(136.25,-119.775,-4.E-02)); +#411796 = VECTOR('',#411797,1.); +#411797 = DIRECTION('',(1.,0.,0.)); +#411798 = ORIENTED_EDGE('',*,*,#411799,.F.); +#411799 = EDGE_CURVE('',#411800,#411792,#411802,.T.); +#411800 = VERTEX_POINT('',#411801); +#411801 = CARTESIAN_POINT('',(136.75,-119.775,0.)); +#411802 = LINE('',#411803,#411804); +#411803 = CARTESIAN_POINT('',(136.75,-119.775,0.)); +#411804 = VECTOR('',#411805,1.); +#411805 = DIRECTION('',(0.,0.,-1.)); +#411806 = ORIENTED_EDGE('',*,*,#411807,.F.); +#411807 = EDGE_CURVE('',#411768,#411800,#411808,.T.); +#411808 = LINE('',#411809,#411810); +#411809 = CARTESIAN_POINT('',(136.25,-119.775,0.)); +#411810 = VECTOR('',#411811,1.); +#411811 = DIRECTION('',(1.,0.,0.)); +#411812 = PLANE('',#411813); +#411813 = AXIS2_PLACEMENT_3D('',#411814,#411815,#411816); +#411814 = CARTESIAN_POINT('',(136.25,-119.775,0.)); +#411815 = DIRECTION('',(0.,-1.,0.)); +#411816 = DIRECTION('',(1.,0.,0.)); +#411817 = ADVANCED_FACE('',(#411818),#411845,.T.); +#411818 = FACE_BOUND('',#411819,.F.); +#411819 = EDGE_LOOP('',(#411820,#411821,#411830,#411838)); +#411820 = ORIENTED_EDGE('',*,*,#411799,.T.); +#411821 = ORIENTED_EDGE('',*,*,#411822,.T.); +#411822 = EDGE_CURVE('',#411792,#411823,#411825,.T.); +#411823 = VERTEX_POINT('',#411824); +#411824 = CARTESIAN_POINT('',(137.,-120.025,-4.E-02)); +#411825 = CIRCLE('',#411826,0.249998959685); +#411826 = AXIS2_PLACEMENT_3D('',#411827,#411828,#411829); +#411827 = CARTESIAN_POINT('',(136.75000104031,-120.0249989596,-4.E-02)); +#411828 = DIRECTION('',(0.,0.,-1.)); +#411829 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#411830 = ORIENTED_EDGE('',*,*,#411831,.F.); +#411831 = EDGE_CURVE('',#411832,#411823,#411834,.T.); +#411832 = VERTEX_POINT('',#411833); +#411833 = CARTESIAN_POINT('',(137.,-120.025,0.)); +#411834 = LINE('',#411835,#411836); +#411835 = CARTESIAN_POINT('',(137.,-120.025,0.)); +#411836 = VECTOR('',#411837,1.); +#411837 = DIRECTION('',(0.,0.,-1.)); +#411838 = ORIENTED_EDGE('',*,*,#411839,.F.); +#411839 = EDGE_CURVE('',#411800,#411832,#411840,.T.); +#411840 = CIRCLE('',#411841,0.249998959685); +#411841 = AXIS2_PLACEMENT_3D('',#411842,#411843,#411844); +#411842 = CARTESIAN_POINT('',(136.75000104031,-120.0249989596,0.)); +#411843 = DIRECTION('',(0.,0.,-1.)); +#411844 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#411845 = CYLINDRICAL_SURFACE('',#411846,0.249998959685); +#411846 = AXIS2_PLACEMENT_3D('',#411847,#411848,#411849); +#411847 = CARTESIAN_POINT('',(136.75000104031,-120.0249989596,0.)); +#411848 = DIRECTION('',(-0.,-0.,1.)); +#411849 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#411850 = ADVANCED_FACE('',(#411851),#411876,.F.); +#411851 = FACE_BOUND('',#411852,.F.); +#411852 = EDGE_LOOP('',(#411853,#411854,#411862,#411870)); +#411853 = ORIENTED_EDGE('',*,*,#411831,.T.); +#411854 = ORIENTED_EDGE('',*,*,#411855,.T.); +#411855 = EDGE_CURVE('',#411823,#411856,#411858,.T.); +#411856 = VERTEX_POINT('',#411857); +#411857 = CARTESIAN_POINT('',(137.,-120.975,-4.E-02)); +#411858 = LINE('',#411859,#411860); +#411859 = CARTESIAN_POINT('',(137.,-120.025,-4.E-02)); +#411860 = VECTOR('',#411861,1.); +#411861 = DIRECTION('',(0.,-1.,0.)); +#411862 = ORIENTED_EDGE('',*,*,#411863,.F.); +#411863 = EDGE_CURVE('',#411864,#411856,#411866,.T.); +#411864 = VERTEX_POINT('',#411865); +#411865 = CARTESIAN_POINT('',(137.,-120.975,0.)); +#411866 = LINE('',#411867,#411868); +#411867 = CARTESIAN_POINT('',(137.,-120.975,0.)); +#411868 = VECTOR('',#411869,1.); +#411869 = DIRECTION('',(0.,0.,-1.)); +#411870 = ORIENTED_EDGE('',*,*,#411871,.F.); +#411871 = EDGE_CURVE('',#411832,#411864,#411872,.T.); +#411872 = LINE('',#411873,#411874); +#411873 = CARTESIAN_POINT('',(137.,-120.025,0.)); +#411874 = VECTOR('',#411875,1.); +#411875 = DIRECTION('',(0.,-1.,0.)); +#411876 = PLANE('',#411877); +#411877 = AXIS2_PLACEMENT_3D('',#411878,#411879,#411880); +#411878 = CARTESIAN_POINT('',(137.,-120.025,0.)); +#411879 = DIRECTION('',(-1.,-0.,-0.)); +#411880 = DIRECTION('',(0.,-1.,0.)); +#411881 = ADVANCED_FACE('',(#411882),#411909,.T.); +#411882 = FACE_BOUND('',#411883,.F.); +#411883 = EDGE_LOOP('',(#411884,#411885,#411894,#411902)); +#411884 = ORIENTED_EDGE('',*,*,#411863,.T.); +#411885 = ORIENTED_EDGE('',*,*,#411886,.T.); +#411886 = EDGE_CURVE('',#411856,#411887,#411889,.T.); +#411887 = VERTEX_POINT('',#411888); +#411888 = CARTESIAN_POINT('',(136.75,-121.225,-4.E-02)); +#411889 = CIRCLE('',#411890,0.249998959685); +#411890 = AXIS2_PLACEMENT_3D('',#411891,#411892,#411893); +#411891 = CARTESIAN_POINT('',(136.75000104031,-120.9750010403,-4.E-02)); +#411892 = DIRECTION('',(0.,0.,-1.)); +#411893 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#411894 = ORIENTED_EDGE('',*,*,#411895,.F.); +#411895 = EDGE_CURVE('',#411896,#411887,#411898,.T.); +#411896 = VERTEX_POINT('',#411897); +#411897 = CARTESIAN_POINT('',(136.75,-121.225,0.)); +#411898 = LINE('',#411899,#411900); +#411899 = CARTESIAN_POINT('',(136.75,-121.225,0.)); +#411900 = VECTOR('',#411901,1.); +#411901 = DIRECTION('',(0.,0.,-1.)); +#411902 = ORIENTED_EDGE('',*,*,#411903,.F.); +#411903 = EDGE_CURVE('',#411864,#411896,#411904,.T.); +#411904 = CIRCLE('',#411905,0.249998959685); +#411905 = AXIS2_PLACEMENT_3D('',#411906,#411907,#411908); +#411906 = CARTESIAN_POINT('',(136.75000104031,-120.9750010403,0.)); +#411907 = DIRECTION('',(0.,0.,-1.)); +#411908 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#411909 = CYLINDRICAL_SURFACE('',#411910,0.249998959685); +#411910 = AXIS2_PLACEMENT_3D('',#411911,#411912,#411913); +#411911 = CARTESIAN_POINT('',(136.75000104031,-120.9750010403,0.)); +#411912 = DIRECTION('',(-0.,-0.,1.)); +#411913 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#411914 = ADVANCED_FACE('',(#411915),#411940,.F.); +#411915 = FACE_BOUND('',#411916,.F.); +#411916 = EDGE_LOOP('',(#411917,#411918,#411926,#411934)); +#411917 = ORIENTED_EDGE('',*,*,#411895,.T.); +#411918 = ORIENTED_EDGE('',*,*,#411919,.T.); +#411919 = EDGE_CURVE('',#411887,#411920,#411922,.T.); +#411920 = VERTEX_POINT('',#411921); +#411921 = CARTESIAN_POINT('',(136.25,-121.225,-4.E-02)); +#411922 = LINE('',#411923,#411924); +#411923 = CARTESIAN_POINT('',(136.75,-121.225,-4.E-02)); +#411924 = VECTOR('',#411925,1.); +#411925 = DIRECTION('',(-1.,0.,0.)); +#411926 = ORIENTED_EDGE('',*,*,#411927,.F.); +#411927 = EDGE_CURVE('',#411928,#411920,#411930,.T.); +#411928 = VERTEX_POINT('',#411929); +#411929 = CARTESIAN_POINT('',(136.25,-121.225,0.)); +#411930 = LINE('',#411931,#411932); +#411931 = CARTESIAN_POINT('',(136.25,-121.225,0.)); +#411932 = VECTOR('',#411933,1.); +#411933 = DIRECTION('',(0.,0.,-1.)); +#411934 = ORIENTED_EDGE('',*,*,#411935,.F.); +#411935 = EDGE_CURVE('',#411896,#411928,#411936,.T.); +#411936 = LINE('',#411937,#411938); +#411937 = CARTESIAN_POINT('',(136.75,-121.225,0.)); +#411938 = VECTOR('',#411939,1.); +#411939 = DIRECTION('',(-1.,0.,0.)); +#411940 = PLANE('',#411941); +#411941 = AXIS2_PLACEMENT_3D('',#411942,#411943,#411944); +#411942 = CARTESIAN_POINT('',(136.75,-121.225,0.)); +#411943 = DIRECTION('',(0.,1.,0.)); +#411944 = DIRECTION('',(-1.,0.,0.)); +#411945 = ADVANCED_FACE('',(#411946),#411973,.T.); +#411946 = FACE_BOUND('',#411947,.F.); +#411947 = EDGE_LOOP('',(#411948,#411949,#411958,#411966)); +#411948 = ORIENTED_EDGE('',*,*,#411927,.T.); +#411949 = ORIENTED_EDGE('',*,*,#411950,.T.); +#411950 = EDGE_CURVE('',#411920,#411951,#411953,.T.); +#411951 = VERTEX_POINT('',#411952); +#411952 = CARTESIAN_POINT('',(136.,-120.975,-4.E-02)); +#411953 = CIRCLE('',#411954,0.249998959685); +#411954 = AXIS2_PLACEMENT_3D('',#411955,#411956,#411957); +#411955 = CARTESIAN_POINT('',(136.24999895968,-120.9750010403,-4.E-02)); +#411956 = DIRECTION('',(0.,0.,-1.)); +#411957 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#411958 = ORIENTED_EDGE('',*,*,#411959,.F.); +#411959 = EDGE_CURVE('',#411960,#411951,#411962,.T.); +#411960 = VERTEX_POINT('',#411961); +#411961 = CARTESIAN_POINT('',(136.,-120.975,0.)); +#411962 = LINE('',#411963,#411964); +#411963 = CARTESIAN_POINT('',(136.,-120.975,0.)); +#411964 = VECTOR('',#411965,1.); +#411965 = DIRECTION('',(0.,0.,-1.)); +#411966 = ORIENTED_EDGE('',*,*,#411967,.F.); +#411967 = EDGE_CURVE('',#411928,#411960,#411968,.T.); +#411968 = CIRCLE('',#411969,0.249998959685); +#411969 = AXIS2_PLACEMENT_3D('',#411970,#411971,#411972); +#411970 = CARTESIAN_POINT('',(136.24999895968,-120.9750010403,0.)); +#411971 = DIRECTION('',(0.,0.,-1.)); +#411972 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#411973 = CYLINDRICAL_SURFACE('',#411974,0.249998959685); +#411974 = AXIS2_PLACEMENT_3D('',#411975,#411976,#411977); +#411975 = CARTESIAN_POINT('',(136.24999895968,-120.9750010403,0.)); +#411976 = DIRECTION('',(-0.,-0.,1.)); +#411977 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#411978 = ADVANCED_FACE('',(#411979),#411995,.F.); +#411979 = FACE_BOUND('',#411980,.F.); +#411980 = EDGE_LOOP('',(#411981,#411982,#411988,#411989)); +#411981 = ORIENTED_EDGE('',*,*,#411959,.T.); +#411982 = ORIENTED_EDGE('',*,*,#411983,.T.); +#411983 = EDGE_CURVE('',#411951,#411751,#411984,.T.); +#411984 = LINE('',#411985,#411986); +#411985 = CARTESIAN_POINT('',(136.,-120.975,-4.E-02)); +#411986 = VECTOR('',#411987,1.); +#411987 = DIRECTION('',(0.,1.,0.)); +#411988 = ORIENTED_EDGE('',*,*,#411748,.F.); +#411989 = ORIENTED_EDGE('',*,*,#411990,.F.); +#411990 = EDGE_CURVE('',#411960,#411749,#411991,.T.); +#411991 = LINE('',#411992,#411993); +#411992 = CARTESIAN_POINT('',(136.,-120.975,0.)); +#411993 = VECTOR('',#411994,1.); +#411994 = DIRECTION('',(0.,1.,0.)); +#411995 = PLANE('',#411996); +#411996 = AXIS2_PLACEMENT_3D('',#411997,#411998,#411999); +#411997 = CARTESIAN_POINT('',(136.,-120.975,0.)); +#411998 = DIRECTION('',(1.,-0.,0.)); +#411999 = DIRECTION('',(0.,1.,0.)); +#412000 = ADVANCED_FACE('',(#412001),#412011,.F.); +#412001 = FACE_BOUND('',#412002,.F.); +#412002 = EDGE_LOOP('',(#412003,#412004,#412005,#412006,#412007,#412008, + #412009,#412010)); +#412003 = ORIENTED_EDGE('',*,*,#411775,.T.); +#412004 = ORIENTED_EDGE('',*,*,#411807,.T.); +#412005 = ORIENTED_EDGE('',*,*,#411839,.T.); +#412006 = ORIENTED_EDGE('',*,*,#411871,.T.); +#412007 = ORIENTED_EDGE('',*,*,#411903,.T.); +#412008 = ORIENTED_EDGE('',*,*,#411935,.T.); +#412009 = ORIENTED_EDGE('',*,*,#411967,.T.); +#412010 = ORIENTED_EDGE('',*,*,#411990,.T.); +#412011 = PLANE('',#412012); +#412012 = AXIS2_PLACEMENT_3D('',#412013,#412014,#412015); +#412013 = CARTESIAN_POINT('',(0.,0.,0.)); +#412014 = DIRECTION('',(-0.,-0.,-1.)); +#412015 = DIRECTION('',(-1.,0.,0.)); +#412016 = ADVANCED_FACE('',(#412017),#412027,.T.); +#412017 = FACE_BOUND('',#412018,.T.); +#412018 = EDGE_LOOP('',(#412019,#412020,#412021,#412022,#412023,#412024, + #412025,#412026)); +#412019 = ORIENTED_EDGE('',*,*,#411758,.T.); +#412020 = ORIENTED_EDGE('',*,*,#411791,.T.); +#412021 = ORIENTED_EDGE('',*,*,#411822,.T.); +#412022 = ORIENTED_EDGE('',*,*,#411855,.T.); +#412023 = ORIENTED_EDGE('',*,*,#411886,.T.); +#412024 = ORIENTED_EDGE('',*,*,#411919,.T.); +#412025 = ORIENTED_EDGE('',*,*,#411950,.T.); +#412026 = ORIENTED_EDGE('',*,*,#411983,.T.); +#412027 = PLANE('',#412028); +#412028 = AXIS2_PLACEMENT_3D('',#412029,#412030,#412031); +#412029 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#412030 = DIRECTION('',(-0.,-0.,-1.)); +#412031 = DIRECTION('',(-1.,0.,0.)); +#412032 = MANIFOLD_SOLID_BREP('',#412033); +#412033 = CLOSED_SHELL('',(#412034,#412076,#412107,#412140,#412171, + #412204,#412235,#412268,#412290,#412306)); +#412034 = ADVANCED_FACE('',(#412035),#412071,.T.); +#412035 = FACE_BOUND('',#412036,.F.); +#412036 = EDGE_LOOP('',(#412037,#412047,#412056,#412064)); +#412037 = ORIENTED_EDGE('',*,*,#412038,.T.); +#412038 = EDGE_CURVE('',#412039,#412041,#412043,.T.); +#412039 = VERTEX_POINT('',#412040); +#412040 = CARTESIAN_POINT('',(133.8,-118.552,0.)); +#412041 = VERTEX_POINT('',#412042); +#412042 = CARTESIAN_POINT('',(133.8,-118.552,-4.E-02)); +#412043 = LINE('',#412044,#412045); +#412044 = CARTESIAN_POINT('',(133.8,-118.552,0.)); +#412045 = VECTOR('',#412046,1.); +#412046 = DIRECTION('',(0.,0.,-1.)); +#412047 = ORIENTED_EDGE('',*,*,#412048,.T.); +#412048 = EDGE_CURVE('',#412041,#412049,#412051,.T.); +#412049 = VERTEX_POINT('',#412050); +#412050 = CARTESIAN_POINT('',(133.852,-118.5,-4.E-02)); +#412051 = CIRCLE('',#412052,5.199847263154E-02); +#412052 = AXIS2_PLACEMENT_3D('',#412053,#412054,#412055); +#412053 = CARTESIAN_POINT('',(133.8519984726,-118.5519984726,-4.E-02)); +#412054 = DIRECTION('',(0.,0.,-1.)); +#412055 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#412056 = ORIENTED_EDGE('',*,*,#412057,.F.); +#412057 = EDGE_CURVE('',#412058,#412049,#412060,.T.); +#412058 = VERTEX_POINT('',#412059); +#412059 = CARTESIAN_POINT('',(133.852,-118.5,0.)); +#412060 = LINE('',#412061,#412062); +#412061 = CARTESIAN_POINT('',(133.852,-118.5,0.)); +#412062 = VECTOR('',#412063,1.); +#412063 = DIRECTION('',(0.,0.,-1.)); +#412064 = ORIENTED_EDGE('',*,*,#412065,.F.); +#412065 = EDGE_CURVE('',#412039,#412058,#412066,.T.); +#412066 = CIRCLE('',#412067,5.199847263154E-02); +#412067 = AXIS2_PLACEMENT_3D('',#412068,#412069,#412070); +#412068 = CARTESIAN_POINT('',(133.8519984726,-118.5519984726,0.)); +#412069 = DIRECTION('',(0.,0.,-1.)); +#412070 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#412071 = CYLINDRICAL_SURFACE('',#412072,5.199847263154E-02); +#412072 = AXIS2_PLACEMENT_3D('',#412073,#412074,#412075); +#412073 = CARTESIAN_POINT('',(133.8519984726,-118.5519984726,0.)); +#412074 = DIRECTION('',(-0.,-0.,1.)); +#412075 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#412076 = ADVANCED_FACE('',(#412077),#412102,.F.); +#412077 = FACE_BOUND('',#412078,.F.); +#412078 = EDGE_LOOP('',(#412079,#412080,#412088,#412096)); +#412079 = ORIENTED_EDGE('',*,*,#412057,.T.); +#412080 = ORIENTED_EDGE('',*,*,#412081,.T.); +#412081 = EDGE_CURVE('',#412049,#412082,#412084,.T.); +#412082 = VERTEX_POINT('',#412083); +#412083 = CARTESIAN_POINT('',(134.248,-118.5,-4.E-02)); +#412084 = LINE('',#412085,#412086); +#412085 = CARTESIAN_POINT('',(133.852,-118.5,-4.E-02)); +#412086 = VECTOR('',#412087,1.); +#412087 = DIRECTION('',(1.,0.,0.)); +#412088 = ORIENTED_EDGE('',*,*,#412089,.F.); +#412089 = EDGE_CURVE('',#412090,#412082,#412092,.T.); +#412090 = VERTEX_POINT('',#412091); +#412091 = CARTESIAN_POINT('',(134.248,-118.5,0.)); +#412092 = LINE('',#412093,#412094); +#412093 = CARTESIAN_POINT('',(134.248,-118.5,0.)); +#412094 = VECTOR('',#412095,1.); +#412095 = DIRECTION('',(0.,0.,-1.)); +#412096 = ORIENTED_EDGE('',*,*,#412097,.F.); +#412097 = EDGE_CURVE('',#412058,#412090,#412098,.T.); +#412098 = LINE('',#412099,#412100); +#412099 = CARTESIAN_POINT('',(133.852,-118.5,0.)); +#412100 = VECTOR('',#412101,1.); +#412101 = DIRECTION('',(1.,0.,0.)); +#412102 = PLANE('',#412103); +#412103 = AXIS2_PLACEMENT_3D('',#412104,#412105,#412106); +#412104 = CARTESIAN_POINT('',(133.852,-118.5,0.)); +#412105 = DIRECTION('',(0.,-1.,0.)); +#412106 = DIRECTION('',(1.,0.,0.)); +#412107 = ADVANCED_FACE('',(#412108),#412135,.T.); +#412108 = FACE_BOUND('',#412109,.F.); +#412109 = EDGE_LOOP('',(#412110,#412111,#412120,#412128)); +#412110 = ORIENTED_EDGE('',*,*,#412089,.T.); +#412111 = ORIENTED_EDGE('',*,*,#412112,.T.); +#412112 = EDGE_CURVE('',#412082,#412113,#412115,.T.); +#412113 = VERTEX_POINT('',#412114); +#412114 = CARTESIAN_POINT('',(134.3,-118.552,-4.E-02)); +#412115 = CIRCLE('',#412116,5.199847263152E-02); +#412116 = AXIS2_PLACEMENT_3D('',#412117,#412118,#412119); +#412117 = CARTESIAN_POINT('',(134.24800152739,-118.5519984726,-4.E-02)); +#412118 = DIRECTION('',(0.,0.,-1.)); +#412119 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#412120 = ORIENTED_EDGE('',*,*,#412121,.F.); +#412121 = EDGE_CURVE('',#412122,#412113,#412124,.T.); +#412122 = VERTEX_POINT('',#412123); +#412123 = CARTESIAN_POINT('',(134.3,-118.552,0.)); +#412124 = LINE('',#412125,#412126); +#412125 = CARTESIAN_POINT('',(134.3,-118.552,0.)); +#412126 = VECTOR('',#412127,1.); +#412127 = DIRECTION('',(0.,0.,-1.)); +#412128 = ORIENTED_EDGE('',*,*,#412129,.F.); +#412129 = EDGE_CURVE('',#412090,#412122,#412130,.T.); +#412130 = CIRCLE('',#412131,5.199847263152E-02); +#412131 = AXIS2_PLACEMENT_3D('',#412132,#412133,#412134); +#412132 = CARTESIAN_POINT('',(134.24800152739,-118.5519984726,0.)); +#412133 = DIRECTION('',(0.,0.,-1.)); +#412134 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#412135 = CYLINDRICAL_SURFACE('',#412136,5.199847263152E-02); +#412136 = AXIS2_PLACEMENT_3D('',#412137,#412138,#412139); +#412137 = CARTESIAN_POINT('',(134.24800152739,-118.5519984726,0.)); +#412138 = DIRECTION('',(-0.,-0.,1.)); +#412139 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#412140 = ADVANCED_FACE('',(#412141),#412166,.F.); +#412141 = FACE_BOUND('',#412142,.F.); +#412142 = EDGE_LOOP('',(#412143,#412144,#412152,#412160)); +#412143 = ORIENTED_EDGE('',*,*,#412121,.T.); +#412144 = ORIENTED_EDGE('',*,*,#412145,.T.); +#412145 = EDGE_CURVE('',#412113,#412146,#412148,.T.); +#412146 = VERTEX_POINT('',#412147); +#412147 = CARTESIAN_POINT('',(134.3,-118.648,-4.E-02)); +#412148 = LINE('',#412149,#412150); +#412149 = CARTESIAN_POINT('',(134.3,-118.552,-4.E-02)); +#412150 = VECTOR('',#412151,1.); +#412151 = DIRECTION('',(0.,-1.,0.)); +#412152 = ORIENTED_EDGE('',*,*,#412153,.F.); +#412153 = EDGE_CURVE('',#412154,#412146,#412156,.T.); +#412154 = VERTEX_POINT('',#412155); +#412155 = CARTESIAN_POINT('',(134.3,-118.648,0.)); +#412156 = LINE('',#412157,#412158); +#412157 = CARTESIAN_POINT('',(134.3,-118.648,0.)); +#412158 = VECTOR('',#412159,1.); +#412159 = DIRECTION('',(0.,0.,-1.)); +#412160 = ORIENTED_EDGE('',*,*,#412161,.F.); +#412161 = EDGE_CURVE('',#412122,#412154,#412162,.T.); +#412162 = LINE('',#412163,#412164); +#412163 = CARTESIAN_POINT('',(134.3,-118.552,0.)); +#412164 = VECTOR('',#412165,1.); +#412165 = DIRECTION('',(0.,-1.,0.)); +#412166 = PLANE('',#412167); +#412167 = AXIS2_PLACEMENT_3D('',#412168,#412169,#412170); +#412168 = CARTESIAN_POINT('',(134.3,-118.552,0.)); +#412169 = DIRECTION('',(-1.,-0.,-0.)); +#412170 = DIRECTION('',(0.,-1.,0.)); +#412171 = ADVANCED_FACE('',(#412172),#412199,.T.); +#412172 = FACE_BOUND('',#412173,.F.); +#412173 = EDGE_LOOP('',(#412174,#412175,#412184,#412192)); +#412174 = ORIENTED_EDGE('',*,*,#412153,.T.); +#412175 = ORIENTED_EDGE('',*,*,#412176,.T.); +#412176 = EDGE_CURVE('',#412146,#412177,#412179,.T.); +#412177 = VERTEX_POINT('',#412178); +#412178 = CARTESIAN_POINT('',(134.248,-118.7,-4.E-02)); +#412179 = CIRCLE('',#412180,5.199847263153E-02); +#412180 = AXIS2_PLACEMENT_3D('',#412181,#412182,#412183); +#412181 = CARTESIAN_POINT('',(134.24800152739,-118.6480015273,-4.E-02)); +#412182 = DIRECTION('',(0.,0.,-1.)); +#412183 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#412184 = ORIENTED_EDGE('',*,*,#412185,.F.); +#412185 = EDGE_CURVE('',#412186,#412177,#412188,.T.); +#412186 = VERTEX_POINT('',#412187); +#412187 = CARTESIAN_POINT('',(134.248,-118.7,0.)); +#412188 = LINE('',#412189,#412190); +#412189 = CARTESIAN_POINT('',(134.248,-118.7,0.)); +#412190 = VECTOR('',#412191,1.); +#412191 = DIRECTION('',(0.,0.,-1.)); +#412192 = ORIENTED_EDGE('',*,*,#412193,.F.); +#412193 = EDGE_CURVE('',#412154,#412186,#412194,.T.); +#412194 = CIRCLE('',#412195,5.199847263153E-02); +#412195 = AXIS2_PLACEMENT_3D('',#412196,#412197,#412198); +#412196 = CARTESIAN_POINT('',(134.24800152739,-118.6480015273,0.)); +#412197 = DIRECTION('',(0.,0.,-1.)); +#412198 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#412199 = CYLINDRICAL_SURFACE('',#412200,5.199847263153E-02); +#412200 = AXIS2_PLACEMENT_3D('',#412201,#412202,#412203); +#412201 = CARTESIAN_POINT('',(134.24800152739,-118.6480015273,0.)); +#412202 = DIRECTION('',(-0.,-0.,1.)); +#412203 = DIRECTION('',(0.999999999569,2.93737645661E-05,0.)); +#412204 = ADVANCED_FACE('',(#412205),#412230,.F.); +#412205 = FACE_BOUND('',#412206,.F.); +#412206 = EDGE_LOOP('',(#412207,#412208,#412216,#412224)); +#412207 = ORIENTED_EDGE('',*,*,#412185,.T.); +#412208 = ORIENTED_EDGE('',*,*,#412209,.T.); +#412209 = EDGE_CURVE('',#412177,#412210,#412212,.T.); +#412210 = VERTEX_POINT('',#412211); +#412211 = CARTESIAN_POINT('',(133.852,-118.7,-4.E-02)); +#412212 = LINE('',#412213,#412214); +#412213 = CARTESIAN_POINT('',(134.248,-118.7,-4.E-02)); +#412214 = VECTOR('',#412215,1.); +#412215 = DIRECTION('',(-1.,0.,0.)); +#412216 = ORIENTED_EDGE('',*,*,#412217,.F.); +#412217 = EDGE_CURVE('',#412218,#412210,#412220,.T.); +#412218 = VERTEX_POINT('',#412219); +#412219 = CARTESIAN_POINT('',(133.852,-118.7,0.)); +#412220 = LINE('',#412221,#412222); +#412221 = CARTESIAN_POINT('',(133.852,-118.7,0.)); +#412222 = VECTOR('',#412223,1.); +#412223 = DIRECTION('',(0.,0.,-1.)); +#412224 = ORIENTED_EDGE('',*,*,#412225,.F.); +#412225 = EDGE_CURVE('',#412186,#412218,#412226,.T.); +#412226 = LINE('',#412227,#412228); +#412227 = CARTESIAN_POINT('',(134.248,-118.7,0.)); +#412228 = VECTOR('',#412229,1.); +#412229 = DIRECTION('',(-1.,0.,0.)); +#412230 = PLANE('',#412231); +#412231 = AXIS2_PLACEMENT_3D('',#412232,#412233,#412234); +#412232 = CARTESIAN_POINT('',(134.248,-118.7,0.)); +#412233 = DIRECTION('',(0.,1.,0.)); +#412234 = DIRECTION('',(-1.,0.,0.)); +#412235 = ADVANCED_FACE('',(#412236),#412263,.T.); +#412236 = FACE_BOUND('',#412237,.F.); +#412237 = EDGE_LOOP('',(#412238,#412239,#412248,#412256)); +#412238 = ORIENTED_EDGE('',*,*,#412217,.T.); +#412239 = ORIENTED_EDGE('',*,*,#412240,.T.); +#412240 = EDGE_CURVE('',#412210,#412241,#412243,.T.); +#412241 = VERTEX_POINT('',#412242); +#412242 = CARTESIAN_POINT('',(133.8,-118.648,-4.E-02)); +#412243 = CIRCLE('',#412244,5.199847263156E-02); +#412244 = AXIS2_PLACEMENT_3D('',#412245,#412246,#412247); +#412245 = CARTESIAN_POINT('',(133.8519984726,-118.6480015273,-4.E-02)); +#412246 = DIRECTION('',(0.,0.,-1.)); +#412247 = DIRECTION('',(2.937376429278E-05,-0.999999999569,0.)); +#412248 = ORIENTED_EDGE('',*,*,#412249,.F.); +#412249 = EDGE_CURVE('',#412250,#412241,#412252,.T.); +#412250 = VERTEX_POINT('',#412251); +#412251 = CARTESIAN_POINT('',(133.8,-118.648,0.)); +#412252 = LINE('',#412253,#412254); +#412253 = CARTESIAN_POINT('',(133.8,-118.648,0.)); +#412254 = VECTOR('',#412255,1.); +#412255 = DIRECTION('',(0.,0.,-1.)); +#412256 = ORIENTED_EDGE('',*,*,#412257,.F.); +#412257 = EDGE_CURVE('',#412218,#412250,#412258,.T.); +#412258 = CIRCLE('',#412259,5.199847263156E-02); +#412259 = AXIS2_PLACEMENT_3D('',#412260,#412261,#412262); +#412260 = CARTESIAN_POINT('',(133.8519984726,-118.6480015273,0.)); +#412261 = DIRECTION('',(0.,0.,-1.)); +#412262 = DIRECTION('',(2.937376429278E-05,-0.999999999569,0.)); +#412263 = CYLINDRICAL_SURFACE('',#412264,5.199847263156E-02); +#412264 = AXIS2_PLACEMENT_3D('',#412265,#412266,#412267); +#412265 = CARTESIAN_POINT('',(133.8519984726,-118.6480015273,0.)); +#412266 = DIRECTION('',(-0.,-0.,1.)); +#412267 = DIRECTION('',(2.937376429278E-05,-0.999999999569,0.)); +#412268 = ADVANCED_FACE('',(#412269),#412285,.F.); +#412269 = FACE_BOUND('',#412270,.F.); +#412270 = EDGE_LOOP('',(#412271,#412272,#412278,#412279)); +#412271 = ORIENTED_EDGE('',*,*,#412249,.T.); +#412272 = ORIENTED_EDGE('',*,*,#412273,.T.); +#412273 = EDGE_CURVE('',#412241,#412041,#412274,.T.); +#412274 = LINE('',#412275,#412276); +#412275 = CARTESIAN_POINT('',(133.8,-118.648,-4.E-02)); +#412276 = VECTOR('',#412277,1.); +#412277 = DIRECTION('',(0.,1.,0.)); +#412278 = ORIENTED_EDGE('',*,*,#412038,.F.); +#412279 = ORIENTED_EDGE('',*,*,#412280,.F.); +#412280 = EDGE_CURVE('',#412250,#412039,#412281,.T.); +#412281 = LINE('',#412282,#412283); +#412282 = CARTESIAN_POINT('',(133.8,-118.648,0.)); +#412283 = VECTOR('',#412284,1.); +#412284 = DIRECTION('',(0.,1.,0.)); +#412285 = PLANE('',#412286); +#412286 = AXIS2_PLACEMENT_3D('',#412287,#412288,#412289); +#412287 = CARTESIAN_POINT('',(133.8,-118.648,0.)); +#412288 = DIRECTION('',(1.,-0.,0.)); +#412289 = DIRECTION('',(0.,1.,0.)); +#412290 = ADVANCED_FACE('',(#412291),#412301,.F.); +#412291 = FACE_BOUND('',#412292,.F.); +#412292 = EDGE_LOOP('',(#412293,#412294,#412295,#412296,#412297,#412298, + #412299,#412300)); +#412293 = ORIENTED_EDGE('',*,*,#412065,.T.); +#412294 = ORIENTED_EDGE('',*,*,#412097,.T.); +#412295 = ORIENTED_EDGE('',*,*,#412129,.T.); +#412296 = ORIENTED_EDGE('',*,*,#412161,.T.); +#412297 = ORIENTED_EDGE('',*,*,#412193,.T.); +#412298 = ORIENTED_EDGE('',*,*,#412225,.T.); +#412299 = ORIENTED_EDGE('',*,*,#412257,.T.); +#412300 = ORIENTED_EDGE('',*,*,#412280,.T.); +#412301 = PLANE('',#412302); +#412302 = AXIS2_PLACEMENT_3D('',#412303,#412304,#412305); +#412303 = CARTESIAN_POINT('',(0.,0.,0.)); +#412304 = DIRECTION('',(-0.,-0.,-1.)); +#412305 = DIRECTION('',(-1.,0.,0.)); +#412306 = ADVANCED_FACE('',(#412307),#412317,.T.); +#412307 = FACE_BOUND('',#412308,.T.); +#412308 = EDGE_LOOP('',(#412309,#412310,#412311,#412312,#412313,#412314, + #412315,#412316)); +#412309 = ORIENTED_EDGE('',*,*,#412048,.T.); +#412310 = ORIENTED_EDGE('',*,*,#412081,.T.); +#412311 = ORIENTED_EDGE('',*,*,#412112,.T.); +#412312 = ORIENTED_EDGE('',*,*,#412145,.T.); +#412313 = ORIENTED_EDGE('',*,*,#412176,.T.); +#412314 = ORIENTED_EDGE('',*,*,#412209,.T.); +#412315 = ORIENTED_EDGE('',*,*,#412240,.T.); +#412316 = ORIENTED_EDGE('',*,*,#412273,.T.); +#412317 = PLANE('',#412318); +#412318 = AXIS2_PLACEMENT_3D('',#412319,#412320,#412321); +#412319 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#412320 = DIRECTION('',(-0.,-0.,-1.)); +#412321 = DIRECTION('',(-1.,0.,0.)); +#412322 = MANIFOLD_SOLID_BREP('',#412323); +#412323 = CLOSED_SHELL('',(#412324,#412366,#412397,#412430,#412461, + #412494,#412525,#412558,#412580,#412596)); +#412324 = ADVANCED_FACE('',(#412325),#412361,.T.); +#412325 = FACE_BOUND('',#412326,.T.); +#412326 = EDGE_LOOP('',(#412327,#412337,#412346,#412354)); +#412327 = ORIENTED_EDGE('',*,*,#412328,.T.); +#412328 = EDGE_CURVE('',#412329,#412331,#412333,.T.); +#412329 = VERTEX_POINT('',#412330); +#412330 = CARTESIAN_POINT('',(134.75,-152.48,1.51)); +#412331 = VERTEX_POINT('',#412332); +#412332 = CARTESIAN_POINT('',(134.75,-152.48,1.55)); +#412333 = LINE('',#412334,#412335); +#412334 = CARTESIAN_POINT('',(134.75,-152.48,1.51)); +#412335 = VECTOR('',#412336,1.); +#412336 = DIRECTION('',(0.,0.,1.)); +#412337 = ORIENTED_EDGE('',*,*,#412338,.T.); +#412338 = EDGE_CURVE('',#412331,#412339,#412341,.T.); +#412339 = VERTEX_POINT('',#412340); +#412340 = CARTESIAN_POINT('',(134.9,-152.33,1.55)); +#412341 = CIRCLE('',#412342,0.150000058649); +#412342 = AXIS2_PLACEMENT_3D('',#412343,#412344,#412345); +#412343 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.55)); +#412344 = DIRECTION('',(0.,0.,-1.)); +#412345 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#412346 = ORIENTED_EDGE('',*,*,#412347,.F.); +#412347 = EDGE_CURVE('',#412348,#412339,#412350,.T.); +#412348 = VERTEX_POINT('',#412349); +#412349 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#412350 = LINE('',#412351,#412352); +#412351 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#412352 = VECTOR('',#412353,1.); +#412353 = DIRECTION('',(0.,0.,1.)); +#412354 = ORIENTED_EDGE('',*,*,#412355,.F.); +#412355 = EDGE_CURVE('',#412329,#412348,#412356,.T.); +#412356 = CIRCLE('',#412357,0.150000058649); +#412357 = AXIS2_PLACEMENT_3D('',#412358,#412359,#412360); +#412358 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.51)); +#412359 = DIRECTION('',(0.,0.,-1.)); +#412360 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#412361 = CYLINDRICAL_SURFACE('',#412362,0.150000058649); +#412362 = AXIS2_PLACEMENT_3D('',#412363,#412364,#412365); +#412363 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.51)); +#412364 = DIRECTION('',(0.,0.,-1.)); +#412365 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#412366 = ADVANCED_FACE('',(#412367),#412392,.T.); +#412367 = FACE_BOUND('',#412368,.T.); +#412368 = EDGE_LOOP('',(#412369,#412370,#412378,#412386)); +#412369 = ORIENTED_EDGE('',*,*,#412347,.T.); +#412370 = ORIENTED_EDGE('',*,*,#412371,.T.); +#412371 = EDGE_CURVE('',#412339,#412372,#412374,.T.); +#412372 = VERTEX_POINT('',#412373); +#412373 = CARTESIAN_POINT('',(135.2,-152.33,1.55)); +#412374 = LINE('',#412375,#412376); +#412375 = CARTESIAN_POINT('',(134.9,-152.33,1.55)); +#412376 = VECTOR('',#412377,1.); +#412377 = DIRECTION('',(1.,0.,0.)); +#412378 = ORIENTED_EDGE('',*,*,#412379,.F.); +#412379 = EDGE_CURVE('',#412380,#412372,#412382,.T.); +#412380 = VERTEX_POINT('',#412381); +#412381 = CARTESIAN_POINT('',(135.2,-152.33,1.51)); +#412382 = LINE('',#412383,#412384); +#412383 = CARTESIAN_POINT('',(135.2,-152.33,1.51)); +#412384 = VECTOR('',#412385,1.); +#412385 = DIRECTION('',(0.,0.,1.)); +#412386 = ORIENTED_EDGE('',*,*,#412387,.F.); +#412387 = EDGE_CURVE('',#412348,#412380,#412388,.T.); +#412388 = LINE('',#412389,#412390); +#412389 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#412390 = VECTOR('',#412391,1.); +#412391 = DIRECTION('',(1.,0.,0.)); +#412392 = PLANE('',#412393); +#412393 = AXIS2_PLACEMENT_3D('',#412394,#412395,#412396); +#412394 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#412395 = DIRECTION('',(0.,1.,0.)); +#412396 = DIRECTION('',(1.,0.,0.)); +#412397 = ADVANCED_FACE('',(#412398),#412425,.T.); +#412398 = FACE_BOUND('',#412399,.T.); +#412399 = EDGE_LOOP('',(#412400,#412401,#412410,#412418)); +#412400 = ORIENTED_EDGE('',*,*,#412379,.T.); +#412401 = ORIENTED_EDGE('',*,*,#412402,.T.); +#412402 = EDGE_CURVE('',#412372,#412403,#412405,.T.); +#412403 = VERTEX_POINT('',#412404); +#412404 = CARTESIAN_POINT('',(135.35,-152.48,1.55)); +#412405 = CIRCLE('',#412406,0.150000058649); +#412406 = AXIS2_PLACEMENT_3D('',#412407,#412408,#412409); +#412407 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.55)); +#412408 = DIRECTION('',(0.,0.,-1.)); +#412409 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#412410 = ORIENTED_EDGE('',*,*,#412411,.F.); +#412411 = EDGE_CURVE('',#412412,#412403,#412414,.T.); +#412412 = VERTEX_POINT('',#412413); +#412413 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#412414 = LINE('',#412415,#412416); +#412415 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#412416 = VECTOR('',#412417,1.); +#412417 = DIRECTION('',(0.,0.,1.)); +#412418 = ORIENTED_EDGE('',*,*,#412419,.F.); +#412419 = EDGE_CURVE('',#412380,#412412,#412420,.T.); +#412420 = CIRCLE('',#412421,0.150000058649); +#412421 = AXIS2_PLACEMENT_3D('',#412422,#412423,#412424); +#412422 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.51)); +#412423 = DIRECTION('',(0.,0.,-1.)); +#412424 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#412425 = CYLINDRICAL_SURFACE('',#412426,0.150000058649); +#412426 = AXIS2_PLACEMENT_3D('',#412427,#412428,#412429); +#412427 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.51)); +#412428 = DIRECTION('',(0.,0.,-1.)); +#412429 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#412430 = ADVANCED_FACE('',(#412431),#412456,.T.); +#412431 = FACE_BOUND('',#412432,.T.); +#412432 = EDGE_LOOP('',(#412433,#412434,#412442,#412450)); +#412433 = ORIENTED_EDGE('',*,*,#412411,.T.); +#412434 = ORIENTED_EDGE('',*,*,#412435,.T.); +#412435 = EDGE_CURVE('',#412403,#412436,#412438,.T.); +#412436 = VERTEX_POINT('',#412437); +#412437 = CARTESIAN_POINT('',(135.35,-153.63,1.55)); +#412438 = LINE('',#412439,#412440); +#412439 = CARTESIAN_POINT('',(135.35,-152.48,1.55)); +#412440 = VECTOR('',#412441,1.); +#412441 = DIRECTION('',(0.,-1.,0.)); +#412442 = ORIENTED_EDGE('',*,*,#412443,.F.); +#412443 = EDGE_CURVE('',#412444,#412436,#412446,.T.); +#412444 = VERTEX_POINT('',#412445); +#412445 = CARTESIAN_POINT('',(135.35,-153.63,1.51)); +#412446 = LINE('',#412447,#412448); +#412447 = CARTESIAN_POINT('',(135.35,-153.63,1.51)); +#412448 = VECTOR('',#412449,1.); +#412449 = DIRECTION('',(0.,0.,1.)); +#412450 = ORIENTED_EDGE('',*,*,#412451,.F.); +#412451 = EDGE_CURVE('',#412412,#412444,#412452,.T.); +#412452 = LINE('',#412453,#412454); +#412453 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#412454 = VECTOR('',#412455,1.); +#412455 = DIRECTION('',(0.,-1.,0.)); +#412456 = PLANE('',#412457); +#412457 = AXIS2_PLACEMENT_3D('',#412458,#412459,#412460); +#412458 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#412459 = DIRECTION('',(1.,0.,-0.)); +#412460 = DIRECTION('',(0.,-1.,0.)); +#412461 = ADVANCED_FACE('',(#412462),#412489,.T.); +#412462 = FACE_BOUND('',#412463,.T.); +#412463 = EDGE_LOOP('',(#412464,#412465,#412474,#412482)); +#412464 = ORIENTED_EDGE('',*,*,#412443,.T.); +#412465 = ORIENTED_EDGE('',*,*,#412466,.T.); +#412466 = EDGE_CURVE('',#412436,#412467,#412469,.T.); +#412467 = VERTEX_POINT('',#412468); +#412468 = CARTESIAN_POINT('',(135.2,-153.78,1.55)); +#412469 = CIRCLE('',#412470,0.150000058649); +#412470 = AXIS2_PLACEMENT_3D('',#412471,#412472,#412473); +#412471 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.55)); +#412472 = DIRECTION('',(0.,0.,-1.)); +#412473 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#412474 = ORIENTED_EDGE('',*,*,#412475,.F.); +#412475 = EDGE_CURVE('',#412476,#412467,#412478,.T.); +#412476 = VERTEX_POINT('',#412477); +#412477 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#412478 = LINE('',#412479,#412480); +#412479 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#412480 = VECTOR('',#412481,1.); +#412481 = DIRECTION('',(0.,0.,1.)); +#412482 = ORIENTED_EDGE('',*,*,#412483,.F.); +#412483 = EDGE_CURVE('',#412444,#412476,#412484,.T.); +#412484 = CIRCLE('',#412485,0.150000058649); +#412485 = AXIS2_PLACEMENT_3D('',#412486,#412487,#412488); +#412486 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.51)); +#412487 = DIRECTION('',(0.,0.,-1.)); +#412488 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#412489 = CYLINDRICAL_SURFACE('',#412490,0.150000058649); +#412490 = AXIS2_PLACEMENT_3D('',#412491,#412492,#412493); +#412491 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.51)); +#412492 = DIRECTION('',(0.,0.,-1.)); +#412493 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#412494 = ADVANCED_FACE('',(#412495),#412520,.T.); +#412495 = FACE_BOUND('',#412496,.T.); +#412496 = EDGE_LOOP('',(#412497,#412498,#412506,#412514)); +#412497 = ORIENTED_EDGE('',*,*,#412475,.T.); +#412498 = ORIENTED_EDGE('',*,*,#412499,.T.); +#412499 = EDGE_CURVE('',#412467,#412500,#412502,.T.); +#412500 = VERTEX_POINT('',#412501); +#412501 = CARTESIAN_POINT('',(134.9,-153.78,1.55)); +#412502 = LINE('',#412503,#412504); +#412503 = CARTESIAN_POINT('',(135.2,-153.78,1.55)); +#412504 = VECTOR('',#412505,1.); +#412505 = DIRECTION('',(-1.,0.,0.)); +#412506 = ORIENTED_EDGE('',*,*,#412507,.F.); +#412507 = EDGE_CURVE('',#412508,#412500,#412510,.T.); +#412508 = VERTEX_POINT('',#412509); +#412509 = CARTESIAN_POINT('',(134.9,-153.78,1.51)); +#412510 = LINE('',#412511,#412512); +#412511 = CARTESIAN_POINT('',(134.9,-153.78,1.51)); +#412512 = VECTOR('',#412513,1.); +#412513 = DIRECTION('',(0.,0.,1.)); +#412514 = ORIENTED_EDGE('',*,*,#412515,.F.); +#412515 = EDGE_CURVE('',#412476,#412508,#412516,.T.); +#412516 = LINE('',#412517,#412518); +#412517 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#412518 = VECTOR('',#412519,1.); +#412519 = DIRECTION('',(-1.,0.,0.)); +#412520 = PLANE('',#412521); +#412521 = AXIS2_PLACEMENT_3D('',#412522,#412523,#412524); +#412522 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#412523 = DIRECTION('',(0.,-1.,0.)); +#412524 = DIRECTION('',(-1.,0.,0.)); +#412525 = ADVANCED_FACE('',(#412526),#412553,.T.); +#412526 = FACE_BOUND('',#412527,.T.); +#412527 = EDGE_LOOP('',(#412528,#412529,#412538,#412546)); +#412528 = ORIENTED_EDGE('',*,*,#412507,.T.); +#412529 = ORIENTED_EDGE('',*,*,#412530,.T.); +#412530 = EDGE_CURVE('',#412500,#412531,#412533,.T.); +#412531 = VERTEX_POINT('',#412532); +#412532 = CARTESIAN_POINT('',(134.75,-153.63,1.55)); +#412533 = CIRCLE('',#412534,0.150000058649); +#412534 = AXIS2_PLACEMENT_3D('',#412535,#412536,#412537); +#412535 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.55)); +#412536 = DIRECTION('',(0.,0.,-1.)); +#412537 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#412538 = ORIENTED_EDGE('',*,*,#412539,.F.); +#412539 = EDGE_CURVE('',#412540,#412531,#412542,.T.); +#412540 = VERTEX_POINT('',#412541); +#412541 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#412542 = LINE('',#412543,#412544); +#412543 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#412544 = VECTOR('',#412545,1.); +#412545 = DIRECTION('',(0.,0.,1.)); +#412546 = ORIENTED_EDGE('',*,*,#412547,.F.); +#412547 = EDGE_CURVE('',#412508,#412540,#412548,.T.); +#412548 = CIRCLE('',#412549,0.150000058649); +#412549 = AXIS2_PLACEMENT_3D('',#412550,#412551,#412552); +#412550 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.51)); +#412551 = DIRECTION('',(0.,0.,-1.)); +#412552 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#412553 = CYLINDRICAL_SURFACE('',#412554,0.150000058649); +#412554 = AXIS2_PLACEMENT_3D('',#412555,#412556,#412557); +#412555 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.51)); +#412556 = DIRECTION('',(0.,0.,-1.)); +#412557 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#412558 = ADVANCED_FACE('',(#412559),#412575,.T.); +#412559 = FACE_BOUND('',#412560,.T.); +#412560 = EDGE_LOOP('',(#412561,#412562,#412568,#412569)); +#412561 = ORIENTED_EDGE('',*,*,#412539,.T.); +#412562 = ORIENTED_EDGE('',*,*,#412563,.T.); +#412563 = EDGE_CURVE('',#412531,#412331,#412564,.T.); +#412564 = LINE('',#412565,#412566); +#412565 = CARTESIAN_POINT('',(134.75,-153.63,1.55)); +#412566 = VECTOR('',#412567,1.); +#412567 = DIRECTION('',(0.,1.,0.)); +#412568 = ORIENTED_EDGE('',*,*,#412328,.F.); +#412569 = ORIENTED_EDGE('',*,*,#412570,.F.); +#412570 = EDGE_CURVE('',#412540,#412329,#412571,.T.); +#412571 = LINE('',#412572,#412573); +#412572 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#412573 = VECTOR('',#412574,1.); +#412574 = DIRECTION('',(0.,1.,0.)); +#412575 = PLANE('',#412576); +#412576 = AXIS2_PLACEMENT_3D('',#412577,#412578,#412579); +#412577 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#412578 = DIRECTION('',(-1.,0.,0.)); +#412579 = DIRECTION('',(0.,1.,0.)); +#412580 = ADVANCED_FACE('',(#412581),#412591,.F.); +#412581 = FACE_BOUND('',#412582,.T.); +#412582 = EDGE_LOOP('',(#412583,#412584,#412585,#412586,#412587,#412588, + #412589,#412590)); +#412583 = ORIENTED_EDGE('',*,*,#412355,.T.); +#412584 = ORIENTED_EDGE('',*,*,#412387,.T.); +#412585 = ORIENTED_EDGE('',*,*,#412419,.T.); +#412586 = ORIENTED_EDGE('',*,*,#412451,.T.); +#412587 = ORIENTED_EDGE('',*,*,#412483,.T.); +#412588 = ORIENTED_EDGE('',*,*,#412515,.T.); +#412589 = ORIENTED_EDGE('',*,*,#412547,.T.); +#412590 = ORIENTED_EDGE('',*,*,#412570,.T.); +#412591 = PLANE('',#412592); +#412592 = AXIS2_PLACEMENT_3D('',#412593,#412594,#412595); +#412593 = CARTESIAN_POINT('',(0.,0.,1.51)); +#412594 = DIRECTION('',(0.,0.,1.)); +#412595 = DIRECTION('',(1.,0.,-0.)); +#412596 = ADVANCED_FACE('',(#412597),#412607,.T.); +#412597 = FACE_BOUND('',#412598,.F.); +#412598 = EDGE_LOOP('',(#412599,#412600,#412601,#412602,#412603,#412604, + #412605,#412606)); +#412599 = ORIENTED_EDGE('',*,*,#412338,.T.); +#412600 = ORIENTED_EDGE('',*,*,#412371,.T.); +#412601 = ORIENTED_EDGE('',*,*,#412402,.T.); +#412602 = ORIENTED_EDGE('',*,*,#412435,.T.); +#412603 = ORIENTED_EDGE('',*,*,#412466,.T.); +#412604 = ORIENTED_EDGE('',*,*,#412499,.T.); +#412605 = ORIENTED_EDGE('',*,*,#412530,.T.); +#412606 = ORIENTED_EDGE('',*,*,#412563,.T.); +#412607 = PLANE('',#412608); +#412608 = AXIS2_PLACEMENT_3D('',#412609,#412610,#412611); +#412609 = CARTESIAN_POINT('',(0.,0.,1.55)); +#412610 = DIRECTION('',(0.,0.,1.)); +#412611 = DIRECTION('',(1.,0.,-0.)); +#412612 = MANIFOLD_SOLID_BREP('',#412613); +#412613 = CLOSED_SHELL('',(#412614,#412656,#412687,#412720,#412751, + #412784,#412815,#412848,#412870,#412886)); +#412614 = ADVANCED_FACE('',(#412615),#412651,.T.); +#412615 = FACE_BOUND('',#412616,.T.); +#412616 = EDGE_LOOP('',(#412617,#412627,#412636,#412644)); +#412617 = ORIENTED_EDGE('',*,*,#412618,.T.); +#412618 = EDGE_CURVE('',#412619,#412621,#412623,.T.); +#412619 = VERTEX_POINT('',#412620); +#412620 = CARTESIAN_POINT('',(139.65,-152.48,1.51)); +#412621 = VERTEX_POINT('',#412622); +#412622 = CARTESIAN_POINT('',(139.65,-152.48,1.55)); +#412623 = LINE('',#412624,#412625); +#412624 = CARTESIAN_POINT('',(139.65,-152.48,1.51)); +#412625 = VECTOR('',#412626,1.); +#412626 = DIRECTION('',(0.,0.,1.)); +#412627 = ORIENTED_EDGE('',*,*,#412628,.T.); +#412628 = EDGE_CURVE('',#412621,#412629,#412631,.T.); +#412629 = VERTEX_POINT('',#412630); +#412630 = CARTESIAN_POINT('',(139.8,-152.33,1.55)); +#412631 = CIRCLE('',#412632,0.150000058649); +#412632 = AXIS2_PLACEMENT_3D('',#412633,#412634,#412635); +#412633 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.55)); +#412634 = DIRECTION('',(0.,0.,-1.)); +#412635 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412636 = ORIENTED_EDGE('',*,*,#412637,.F.); +#412637 = EDGE_CURVE('',#412638,#412629,#412640,.T.); +#412638 = VERTEX_POINT('',#412639); +#412639 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412640 = LINE('',#412641,#412642); +#412641 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412642 = VECTOR('',#412643,1.); +#412643 = DIRECTION('',(0.,0.,1.)); +#412644 = ORIENTED_EDGE('',*,*,#412645,.F.); +#412645 = EDGE_CURVE('',#412619,#412638,#412646,.T.); +#412646 = CIRCLE('',#412647,0.150000058649); +#412647 = AXIS2_PLACEMENT_3D('',#412648,#412649,#412650); +#412648 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.51)); +#412649 = DIRECTION('',(0.,0.,-1.)); +#412650 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412651 = CYLINDRICAL_SURFACE('',#412652,0.150000058649); +#412652 = AXIS2_PLACEMENT_3D('',#412653,#412654,#412655); +#412653 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.51)); +#412654 = DIRECTION('',(0.,0.,-1.)); +#412655 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412656 = ADVANCED_FACE('',(#412657),#412682,.T.); +#412657 = FACE_BOUND('',#412658,.T.); +#412658 = EDGE_LOOP('',(#412659,#412660,#412668,#412676)); +#412659 = ORIENTED_EDGE('',*,*,#412637,.T.); +#412660 = ORIENTED_EDGE('',*,*,#412661,.T.); +#412661 = EDGE_CURVE('',#412629,#412662,#412664,.T.); +#412662 = VERTEX_POINT('',#412663); +#412663 = CARTESIAN_POINT('',(140.1,-152.33,1.55)); +#412664 = LINE('',#412665,#412666); +#412665 = CARTESIAN_POINT('',(139.8,-152.33,1.55)); +#412666 = VECTOR('',#412667,1.); +#412667 = DIRECTION('',(1.,0.,0.)); +#412668 = ORIENTED_EDGE('',*,*,#412669,.F.); +#412669 = EDGE_CURVE('',#412670,#412662,#412672,.T.); +#412670 = VERTEX_POINT('',#412671); +#412671 = CARTESIAN_POINT('',(140.1,-152.33,1.51)); +#412672 = LINE('',#412673,#412674); +#412673 = CARTESIAN_POINT('',(140.1,-152.33,1.51)); +#412674 = VECTOR('',#412675,1.); +#412675 = DIRECTION('',(0.,0.,1.)); +#412676 = ORIENTED_EDGE('',*,*,#412677,.F.); +#412677 = EDGE_CURVE('',#412638,#412670,#412678,.T.); +#412678 = LINE('',#412679,#412680); +#412679 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412680 = VECTOR('',#412681,1.); +#412681 = DIRECTION('',(1.,0.,0.)); +#412682 = PLANE('',#412683); +#412683 = AXIS2_PLACEMENT_3D('',#412684,#412685,#412686); +#412684 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412685 = DIRECTION('',(0.,1.,0.)); +#412686 = DIRECTION('',(1.,0.,0.)); +#412687 = ADVANCED_FACE('',(#412688),#412715,.T.); +#412688 = FACE_BOUND('',#412689,.T.); +#412689 = EDGE_LOOP('',(#412690,#412691,#412700,#412708)); +#412690 = ORIENTED_EDGE('',*,*,#412669,.T.); +#412691 = ORIENTED_EDGE('',*,*,#412692,.T.); +#412692 = EDGE_CURVE('',#412662,#412693,#412695,.T.); +#412693 = VERTEX_POINT('',#412694); +#412694 = CARTESIAN_POINT('',(140.25,-152.48,1.55)); +#412695 = CIRCLE('',#412696,0.150000058649); +#412696 = AXIS2_PLACEMENT_3D('',#412697,#412698,#412699); +#412697 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.55)); +#412698 = DIRECTION('',(0.,0.,-1.)); +#412699 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#412700 = ORIENTED_EDGE('',*,*,#412701,.F.); +#412701 = EDGE_CURVE('',#412702,#412693,#412704,.T.); +#412702 = VERTEX_POINT('',#412703); +#412703 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412704 = LINE('',#412705,#412706); +#412705 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412706 = VECTOR('',#412707,1.); +#412707 = DIRECTION('',(0.,0.,1.)); +#412708 = ORIENTED_EDGE('',*,*,#412709,.F.); +#412709 = EDGE_CURVE('',#412670,#412702,#412710,.T.); +#412710 = CIRCLE('',#412711,0.150000058649); +#412711 = AXIS2_PLACEMENT_3D('',#412712,#412713,#412714); +#412712 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.51)); +#412713 = DIRECTION('',(0.,0.,-1.)); +#412714 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#412715 = CYLINDRICAL_SURFACE('',#412716,0.150000058649); +#412716 = AXIS2_PLACEMENT_3D('',#412717,#412718,#412719); +#412717 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.51)); +#412718 = DIRECTION('',(0.,0.,-1.)); +#412719 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#412720 = ADVANCED_FACE('',(#412721),#412746,.T.); +#412721 = FACE_BOUND('',#412722,.T.); +#412722 = EDGE_LOOP('',(#412723,#412724,#412732,#412740)); +#412723 = ORIENTED_EDGE('',*,*,#412701,.T.); +#412724 = ORIENTED_EDGE('',*,*,#412725,.T.); +#412725 = EDGE_CURVE('',#412693,#412726,#412728,.T.); +#412726 = VERTEX_POINT('',#412727); +#412727 = CARTESIAN_POINT('',(140.25,-153.63,1.55)); +#412728 = LINE('',#412729,#412730); +#412729 = CARTESIAN_POINT('',(140.25,-152.48,1.55)); +#412730 = VECTOR('',#412731,1.); +#412731 = DIRECTION('',(0.,-1.,0.)); +#412732 = ORIENTED_EDGE('',*,*,#412733,.F.); +#412733 = EDGE_CURVE('',#412734,#412726,#412736,.T.); +#412734 = VERTEX_POINT('',#412735); +#412735 = CARTESIAN_POINT('',(140.25,-153.63,1.51)); +#412736 = LINE('',#412737,#412738); +#412737 = CARTESIAN_POINT('',(140.25,-153.63,1.51)); +#412738 = VECTOR('',#412739,1.); +#412739 = DIRECTION('',(0.,0.,1.)); +#412740 = ORIENTED_EDGE('',*,*,#412741,.F.); +#412741 = EDGE_CURVE('',#412702,#412734,#412742,.T.); +#412742 = LINE('',#412743,#412744); +#412743 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412744 = VECTOR('',#412745,1.); +#412745 = DIRECTION('',(0.,-1.,0.)); +#412746 = PLANE('',#412747); +#412747 = AXIS2_PLACEMENT_3D('',#412748,#412749,#412750); +#412748 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412749 = DIRECTION('',(1.,0.,-0.)); +#412750 = DIRECTION('',(0.,-1.,0.)); +#412751 = ADVANCED_FACE('',(#412752),#412779,.T.); +#412752 = FACE_BOUND('',#412753,.T.); +#412753 = EDGE_LOOP('',(#412754,#412755,#412764,#412772)); +#412754 = ORIENTED_EDGE('',*,*,#412733,.T.); +#412755 = ORIENTED_EDGE('',*,*,#412756,.T.); +#412756 = EDGE_CURVE('',#412726,#412757,#412759,.T.); +#412757 = VERTEX_POINT('',#412758); +#412758 = CARTESIAN_POINT('',(140.1,-153.78,1.55)); +#412759 = CIRCLE('',#412760,0.150000058649); +#412760 = AXIS2_PLACEMENT_3D('',#412761,#412762,#412763); +#412761 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.55)); +#412762 = DIRECTION('',(0.,0.,-1.)); +#412763 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#412764 = ORIENTED_EDGE('',*,*,#412765,.F.); +#412765 = EDGE_CURVE('',#412766,#412757,#412768,.T.); +#412766 = VERTEX_POINT('',#412767); +#412767 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#412768 = LINE('',#412769,#412770); +#412769 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#412770 = VECTOR('',#412771,1.); +#412771 = DIRECTION('',(0.,0.,1.)); +#412772 = ORIENTED_EDGE('',*,*,#412773,.F.); +#412773 = EDGE_CURVE('',#412734,#412766,#412774,.T.); +#412774 = CIRCLE('',#412775,0.150000058649); +#412775 = AXIS2_PLACEMENT_3D('',#412776,#412777,#412778); +#412776 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.51)); +#412777 = DIRECTION('',(0.,0.,-1.)); +#412778 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#412779 = CYLINDRICAL_SURFACE('',#412780,0.150000058649); +#412780 = AXIS2_PLACEMENT_3D('',#412781,#412782,#412783); +#412781 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.51)); +#412782 = DIRECTION('',(0.,0.,-1.)); +#412783 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#412784 = ADVANCED_FACE('',(#412785),#412810,.T.); +#412785 = FACE_BOUND('',#412786,.T.); +#412786 = EDGE_LOOP('',(#412787,#412788,#412796,#412804)); +#412787 = ORIENTED_EDGE('',*,*,#412765,.T.); +#412788 = ORIENTED_EDGE('',*,*,#412789,.T.); +#412789 = EDGE_CURVE('',#412757,#412790,#412792,.T.); +#412790 = VERTEX_POINT('',#412791); +#412791 = CARTESIAN_POINT('',(139.8,-153.78,1.55)); +#412792 = LINE('',#412793,#412794); +#412793 = CARTESIAN_POINT('',(140.1,-153.78,1.55)); +#412794 = VECTOR('',#412795,1.); +#412795 = DIRECTION('',(-1.,0.,0.)); +#412796 = ORIENTED_EDGE('',*,*,#412797,.F.); +#412797 = EDGE_CURVE('',#412798,#412790,#412800,.T.); +#412798 = VERTEX_POINT('',#412799); +#412799 = CARTESIAN_POINT('',(139.8,-153.78,1.51)); +#412800 = LINE('',#412801,#412802); +#412801 = CARTESIAN_POINT('',(139.8,-153.78,1.51)); +#412802 = VECTOR('',#412803,1.); +#412803 = DIRECTION('',(0.,0.,1.)); +#412804 = ORIENTED_EDGE('',*,*,#412805,.F.); +#412805 = EDGE_CURVE('',#412766,#412798,#412806,.T.); +#412806 = LINE('',#412807,#412808); +#412807 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#412808 = VECTOR('',#412809,1.); +#412809 = DIRECTION('',(-1.,0.,0.)); +#412810 = PLANE('',#412811); +#412811 = AXIS2_PLACEMENT_3D('',#412812,#412813,#412814); +#412812 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#412813 = DIRECTION('',(0.,-1.,0.)); +#412814 = DIRECTION('',(-1.,0.,0.)); +#412815 = ADVANCED_FACE('',(#412816),#412843,.T.); +#412816 = FACE_BOUND('',#412817,.T.); +#412817 = EDGE_LOOP('',(#412818,#412819,#412828,#412836)); +#412818 = ORIENTED_EDGE('',*,*,#412797,.T.); +#412819 = ORIENTED_EDGE('',*,*,#412820,.T.); +#412820 = EDGE_CURVE('',#412790,#412821,#412823,.T.); +#412821 = VERTEX_POINT('',#412822); +#412822 = CARTESIAN_POINT('',(139.65,-153.63,1.55)); +#412823 = CIRCLE('',#412824,0.150000058649); +#412824 = AXIS2_PLACEMENT_3D('',#412825,#412826,#412827); +#412825 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.55)); +#412826 = DIRECTION('',(0.,0.,-1.)); +#412827 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#412828 = ORIENTED_EDGE('',*,*,#412829,.F.); +#412829 = EDGE_CURVE('',#412830,#412821,#412832,.T.); +#412830 = VERTEX_POINT('',#412831); +#412831 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#412832 = LINE('',#412833,#412834); +#412833 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#412834 = VECTOR('',#412835,1.); +#412835 = DIRECTION('',(0.,0.,1.)); +#412836 = ORIENTED_EDGE('',*,*,#412837,.F.); +#412837 = EDGE_CURVE('',#412798,#412830,#412838,.T.); +#412838 = CIRCLE('',#412839,0.150000058649); +#412839 = AXIS2_PLACEMENT_3D('',#412840,#412841,#412842); +#412840 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.51)); +#412841 = DIRECTION('',(0.,0.,-1.)); +#412842 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#412843 = CYLINDRICAL_SURFACE('',#412844,0.150000058649); +#412844 = AXIS2_PLACEMENT_3D('',#412845,#412846,#412847); +#412845 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.51)); +#412846 = DIRECTION('',(0.,0.,-1.)); +#412847 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#412848 = ADVANCED_FACE('',(#412849),#412865,.T.); +#412849 = FACE_BOUND('',#412850,.T.); +#412850 = EDGE_LOOP('',(#412851,#412852,#412858,#412859)); +#412851 = ORIENTED_EDGE('',*,*,#412829,.T.); +#412852 = ORIENTED_EDGE('',*,*,#412853,.T.); +#412853 = EDGE_CURVE('',#412821,#412621,#412854,.T.); +#412854 = LINE('',#412855,#412856); +#412855 = CARTESIAN_POINT('',(139.65,-153.63,1.55)); +#412856 = VECTOR('',#412857,1.); +#412857 = DIRECTION('',(0.,1.,0.)); +#412858 = ORIENTED_EDGE('',*,*,#412618,.F.); +#412859 = ORIENTED_EDGE('',*,*,#412860,.F.); +#412860 = EDGE_CURVE('',#412830,#412619,#412861,.T.); +#412861 = LINE('',#412862,#412863); +#412862 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#412863 = VECTOR('',#412864,1.); +#412864 = DIRECTION('',(0.,1.,0.)); +#412865 = PLANE('',#412866); +#412866 = AXIS2_PLACEMENT_3D('',#412867,#412868,#412869); +#412867 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#412868 = DIRECTION('',(-1.,0.,0.)); +#412869 = DIRECTION('',(0.,1.,0.)); +#412870 = ADVANCED_FACE('',(#412871),#412881,.F.); +#412871 = FACE_BOUND('',#412872,.T.); +#412872 = EDGE_LOOP('',(#412873,#412874,#412875,#412876,#412877,#412878, + #412879,#412880)); +#412873 = ORIENTED_EDGE('',*,*,#412645,.T.); +#412874 = ORIENTED_EDGE('',*,*,#412677,.T.); +#412875 = ORIENTED_EDGE('',*,*,#412709,.T.); +#412876 = ORIENTED_EDGE('',*,*,#412741,.T.); +#412877 = ORIENTED_EDGE('',*,*,#412773,.T.); +#412878 = ORIENTED_EDGE('',*,*,#412805,.T.); +#412879 = ORIENTED_EDGE('',*,*,#412837,.T.); +#412880 = ORIENTED_EDGE('',*,*,#412860,.T.); +#412881 = PLANE('',#412882); +#412882 = AXIS2_PLACEMENT_3D('',#412883,#412884,#412885); +#412883 = CARTESIAN_POINT('',(0.,0.,1.51)); +#412884 = DIRECTION('',(0.,0.,1.)); +#412885 = DIRECTION('',(1.,0.,-0.)); +#412886 = ADVANCED_FACE('',(#412887),#412897,.T.); +#412887 = FACE_BOUND('',#412888,.F.); +#412888 = EDGE_LOOP('',(#412889,#412890,#412891,#412892,#412893,#412894, + #412895,#412896)); +#412889 = ORIENTED_EDGE('',*,*,#412628,.T.); +#412890 = ORIENTED_EDGE('',*,*,#412661,.T.); +#412891 = ORIENTED_EDGE('',*,*,#412692,.T.); +#412892 = ORIENTED_EDGE('',*,*,#412725,.T.); +#412893 = ORIENTED_EDGE('',*,*,#412756,.T.); +#412894 = ORIENTED_EDGE('',*,*,#412789,.T.); +#412895 = ORIENTED_EDGE('',*,*,#412820,.T.); +#412896 = ORIENTED_EDGE('',*,*,#412853,.T.); +#412897 = PLANE('',#412898); +#412898 = AXIS2_PLACEMENT_3D('',#412899,#412900,#412901); +#412899 = CARTESIAN_POINT('',(0.,0.,1.55)); +#412900 = DIRECTION('',(0.,0.,1.)); +#412901 = DIRECTION('',(1.,0.,-0.)); +#412902 = MANIFOLD_SOLID_BREP('',#412903); +#412903 = CLOSED_SHELL('',(#412904,#412946,#412977,#413010,#413041, + #413074,#413105,#413138,#413160,#413176)); +#412904 = ADVANCED_FACE('',(#412905),#412941,.T.); +#412905 = FACE_BOUND('',#412906,.T.); +#412906 = EDGE_LOOP('',(#412907,#412917,#412926,#412934)); +#412907 = ORIENTED_EDGE('',*,*,#412908,.T.); +#412908 = EDGE_CURVE('',#412909,#412911,#412913,.T.); +#412909 = VERTEX_POINT('',#412910); +#412910 = CARTESIAN_POINT('',(139.65,-152.48,1.51)); +#412911 = VERTEX_POINT('',#412912); +#412912 = CARTESIAN_POINT('',(139.65,-152.48,1.55)); +#412913 = LINE('',#412914,#412915); +#412914 = CARTESIAN_POINT('',(139.65,-152.48,1.51)); +#412915 = VECTOR('',#412916,1.); +#412916 = DIRECTION('',(0.,0.,1.)); +#412917 = ORIENTED_EDGE('',*,*,#412918,.T.); +#412918 = EDGE_CURVE('',#412911,#412919,#412921,.T.); +#412919 = VERTEX_POINT('',#412920); +#412920 = CARTESIAN_POINT('',(139.8,-152.33,1.55)); +#412921 = CIRCLE('',#412922,0.150000058649); +#412922 = AXIS2_PLACEMENT_3D('',#412923,#412924,#412925); +#412923 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.55)); +#412924 = DIRECTION('',(0.,0.,-1.)); +#412925 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412926 = ORIENTED_EDGE('',*,*,#412927,.F.); +#412927 = EDGE_CURVE('',#412928,#412919,#412930,.T.); +#412928 = VERTEX_POINT('',#412929); +#412929 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412930 = LINE('',#412931,#412932); +#412931 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412932 = VECTOR('',#412933,1.); +#412933 = DIRECTION('',(0.,0.,1.)); +#412934 = ORIENTED_EDGE('',*,*,#412935,.F.); +#412935 = EDGE_CURVE('',#412909,#412928,#412936,.T.); +#412936 = CIRCLE('',#412937,0.150000058649); +#412937 = AXIS2_PLACEMENT_3D('',#412938,#412939,#412940); +#412938 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.51)); +#412939 = DIRECTION('',(0.,0.,-1.)); +#412940 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412941 = CYLINDRICAL_SURFACE('',#412942,0.150000058649); +#412942 = AXIS2_PLACEMENT_3D('',#412943,#412944,#412945); +#412943 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.51)); +#412944 = DIRECTION('',(0.,0.,-1.)); +#412945 = DIRECTION('',(-1.,3.90995408976E-07,0.)); +#412946 = ADVANCED_FACE('',(#412947),#412972,.T.); +#412947 = FACE_BOUND('',#412948,.T.); +#412948 = EDGE_LOOP('',(#412949,#412950,#412958,#412966)); +#412949 = ORIENTED_EDGE('',*,*,#412927,.T.); +#412950 = ORIENTED_EDGE('',*,*,#412951,.T.); +#412951 = EDGE_CURVE('',#412919,#412952,#412954,.T.); +#412952 = VERTEX_POINT('',#412953); +#412953 = CARTESIAN_POINT('',(140.1,-152.33,1.55)); +#412954 = LINE('',#412955,#412956); +#412955 = CARTESIAN_POINT('',(139.8,-152.33,1.55)); +#412956 = VECTOR('',#412957,1.); +#412957 = DIRECTION('',(1.,0.,0.)); +#412958 = ORIENTED_EDGE('',*,*,#412959,.F.); +#412959 = EDGE_CURVE('',#412960,#412952,#412962,.T.); +#412960 = VERTEX_POINT('',#412961); +#412961 = CARTESIAN_POINT('',(140.1,-152.33,1.51)); +#412962 = LINE('',#412963,#412964); +#412963 = CARTESIAN_POINT('',(140.1,-152.33,1.51)); +#412964 = VECTOR('',#412965,1.); +#412965 = DIRECTION('',(0.,0.,1.)); +#412966 = ORIENTED_EDGE('',*,*,#412967,.F.); +#412967 = EDGE_CURVE('',#412928,#412960,#412968,.T.); +#412968 = LINE('',#412969,#412970); +#412969 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412970 = VECTOR('',#412971,1.); +#412971 = DIRECTION('',(1.,0.,0.)); +#412972 = PLANE('',#412973); +#412973 = AXIS2_PLACEMENT_3D('',#412974,#412975,#412976); +#412974 = CARTESIAN_POINT('',(139.8,-152.33,1.51)); +#412975 = DIRECTION('',(0.,1.,0.)); +#412976 = DIRECTION('',(1.,0.,0.)); +#412977 = ADVANCED_FACE('',(#412978),#413005,.T.); +#412978 = FACE_BOUND('',#412979,.T.); +#412979 = EDGE_LOOP('',(#412980,#412981,#412990,#412998)); +#412980 = ORIENTED_EDGE('',*,*,#412959,.T.); +#412981 = ORIENTED_EDGE('',*,*,#412982,.T.); +#412982 = EDGE_CURVE('',#412952,#412983,#412985,.T.); +#412983 = VERTEX_POINT('',#412984); +#412984 = CARTESIAN_POINT('',(140.25,-152.48,1.55)); +#412985 = CIRCLE('',#412986,0.150000058649); +#412986 = AXIS2_PLACEMENT_3D('',#412987,#412988,#412989); +#412987 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.55)); +#412988 = DIRECTION('',(0.,0.,-1.)); +#412989 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#412990 = ORIENTED_EDGE('',*,*,#412991,.F.); +#412991 = EDGE_CURVE('',#412992,#412983,#412994,.T.); +#412992 = VERTEX_POINT('',#412993); +#412993 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412994 = LINE('',#412995,#412996); +#412995 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#412996 = VECTOR('',#412997,1.); +#412997 = DIRECTION('',(0.,0.,1.)); +#412998 = ORIENTED_EDGE('',*,*,#412999,.F.); +#412999 = EDGE_CURVE('',#412960,#412992,#413000,.T.); +#413000 = CIRCLE('',#413001,0.150000058649); +#413001 = AXIS2_PLACEMENT_3D('',#413002,#413003,#413004); +#413002 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.51)); +#413003 = DIRECTION('',(0.,0.,-1.)); +#413004 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#413005 = CYLINDRICAL_SURFACE('',#413006,0.150000058649); +#413006 = AXIS2_PLACEMENT_3D('',#413007,#413008,#413009); +#413007 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.51)); +#413008 = DIRECTION('',(0.,0.,-1.)); +#413009 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#413010 = ADVANCED_FACE('',(#413011),#413036,.T.); +#413011 = FACE_BOUND('',#413012,.T.); +#413012 = EDGE_LOOP('',(#413013,#413014,#413022,#413030)); +#413013 = ORIENTED_EDGE('',*,*,#412991,.T.); +#413014 = ORIENTED_EDGE('',*,*,#413015,.T.); +#413015 = EDGE_CURVE('',#412983,#413016,#413018,.T.); +#413016 = VERTEX_POINT('',#413017); +#413017 = CARTESIAN_POINT('',(140.25,-153.63,1.55)); +#413018 = LINE('',#413019,#413020); +#413019 = CARTESIAN_POINT('',(140.25,-152.48,1.55)); +#413020 = VECTOR('',#413021,1.); +#413021 = DIRECTION('',(0.,-1.,0.)); +#413022 = ORIENTED_EDGE('',*,*,#413023,.F.); +#413023 = EDGE_CURVE('',#413024,#413016,#413026,.T.); +#413024 = VERTEX_POINT('',#413025); +#413025 = CARTESIAN_POINT('',(140.25,-153.63,1.51)); +#413026 = LINE('',#413027,#413028); +#413027 = CARTESIAN_POINT('',(140.25,-153.63,1.51)); +#413028 = VECTOR('',#413029,1.); +#413029 = DIRECTION('',(0.,0.,1.)); +#413030 = ORIENTED_EDGE('',*,*,#413031,.F.); +#413031 = EDGE_CURVE('',#412992,#413024,#413032,.T.); +#413032 = LINE('',#413033,#413034); +#413033 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#413034 = VECTOR('',#413035,1.); +#413035 = DIRECTION('',(0.,-1.,0.)); +#413036 = PLANE('',#413037); +#413037 = AXIS2_PLACEMENT_3D('',#413038,#413039,#413040); +#413038 = CARTESIAN_POINT('',(140.25,-152.48,1.51)); +#413039 = DIRECTION('',(1.,0.,-0.)); +#413040 = DIRECTION('',(0.,-1.,0.)); +#413041 = ADVANCED_FACE('',(#413042),#413069,.T.); +#413042 = FACE_BOUND('',#413043,.T.); +#413043 = EDGE_LOOP('',(#413044,#413045,#413054,#413062)); +#413044 = ORIENTED_EDGE('',*,*,#413023,.T.); +#413045 = ORIENTED_EDGE('',*,*,#413046,.T.); +#413046 = EDGE_CURVE('',#413016,#413047,#413049,.T.); +#413047 = VERTEX_POINT('',#413048); +#413048 = CARTESIAN_POINT('',(140.1,-153.78,1.55)); +#413049 = CIRCLE('',#413050,0.150000058649); +#413050 = AXIS2_PLACEMENT_3D('',#413051,#413052,#413053); +#413051 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.55)); +#413052 = DIRECTION('',(0.,0.,-1.)); +#413053 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#413054 = ORIENTED_EDGE('',*,*,#413055,.F.); +#413055 = EDGE_CURVE('',#413056,#413047,#413058,.T.); +#413056 = VERTEX_POINT('',#413057); +#413057 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#413058 = LINE('',#413059,#413060); +#413059 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#413060 = VECTOR('',#413061,1.); +#413061 = DIRECTION('',(0.,0.,1.)); +#413062 = ORIENTED_EDGE('',*,*,#413063,.F.); +#413063 = EDGE_CURVE('',#413024,#413056,#413064,.T.); +#413064 = CIRCLE('',#413065,0.150000058649); +#413065 = AXIS2_PLACEMENT_3D('',#413066,#413067,#413068); +#413066 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.51)); +#413067 = DIRECTION('',(0.,0.,-1.)); +#413068 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#413069 = CYLINDRICAL_SURFACE('',#413070,0.150000058649); +#413070 = AXIS2_PLACEMENT_3D('',#413071,#413072,#413073); +#413071 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.51)); +#413072 = DIRECTION('',(0.,0.,-1.)); +#413073 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#413074 = ADVANCED_FACE('',(#413075),#413100,.T.); +#413075 = FACE_BOUND('',#413076,.T.); +#413076 = EDGE_LOOP('',(#413077,#413078,#413086,#413094)); +#413077 = ORIENTED_EDGE('',*,*,#413055,.T.); +#413078 = ORIENTED_EDGE('',*,*,#413079,.T.); +#413079 = EDGE_CURVE('',#413047,#413080,#413082,.T.); +#413080 = VERTEX_POINT('',#413081); +#413081 = CARTESIAN_POINT('',(139.8,-153.78,1.55)); +#413082 = LINE('',#413083,#413084); +#413083 = CARTESIAN_POINT('',(140.1,-153.78,1.55)); +#413084 = VECTOR('',#413085,1.); +#413085 = DIRECTION('',(-1.,0.,0.)); +#413086 = ORIENTED_EDGE('',*,*,#413087,.F.); +#413087 = EDGE_CURVE('',#413088,#413080,#413090,.T.); +#413088 = VERTEX_POINT('',#413089); +#413089 = CARTESIAN_POINT('',(139.8,-153.78,1.51)); +#413090 = LINE('',#413091,#413092); +#413091 = CARTESIAN_POINT('',(139.8,-153.78,1.51)); +#413092 = VECTOR('',#413093,1.); +#413093 = DIRECTION('',(0.,0.,1.)); +#413094 = ORIENTED_EDGE('',*,*,#413095,.F.); +#413095 = EDGE_CURVE('',#413056,#413088,#413096,.T.); +#413096 = LINE('',#413097,#413098); +#413097 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#413098 = VECTOR('',#413099,1.); +#413099 = DIRECTION('',(-1.,0.,0.)); +#413100 = PLANE('',#413101); +#413101 = AXIS2_PLACEMENT_3D('',#413102,#413103,#413104); +#413102 = CARTESIAN_POINT('',(140.1,-153.78,1.51)); +#413103 = DIRECTION('',(0.,-1.,0.)); +#413104 = DIRECTION('',(-1.,0.,0.)); +#413105 = ADVANCED_FACE('',(#413106),#413133,.T.); +#413106 = FACE_BOUND('',#413107,.T.); +#413107 = EDGE_LOOP('',(#413108,#413109,#413118,#413126)); +#413108 = ORIENTED_EDGE('',*,*,#413087,.T.); +#413109 = ORIENTED_EDGE('',*,*,#413110,.T.); +#413110 = EDGE_CURVE('',#413080,#413111,#413113,.T.); +#413111 = VERTEX_POINT('',#413112); +#413112 = CARTESIAN_POINT('',(139.65,-153.63,1.55)); +#413113 = CIRCLE('',#413114,0.150000058649); +#413114 = AXIS2_PLACEMENT_3D('',#413115,#413116,#413117); +#413115 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.55)); +#413116 = DIRECTION('',(0.,0.,-1.)); +#413117 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#413118 = ORIENTED_EDGE('',*,*,#413119,.F.); +#413119 = EDGE_CURVE('',#413120,#413111,#413122,.T.); +#413120 = VERTEX_POINT('',#413121); +#413121 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#413122 = LINE('',#413123,#413124); +#413123 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#413124 = VECTOR('',#413125,1.); +#413125 = DIRECTION('',(0.,0.,1.)); +#413126 = ORIENTED_EDGE('',*,*,#413127,.F.); +#413127 = EDGE_CURVE('',#413088,#413120,#413128,.T.); +#413128 = CIRCLE('',#413129,0.150000058649); +#413129 = AXIS2_PLACEMENT_3D('',#413130,#413131,#413132); +#413130 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.51)); +#413131 = DIRECTION('',(0.,0.,-1.)); +#413132 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#413133 = CYLINDRICAL_SURFACE('',#413134,0.150000058649); +#413134 = AXIS2_PLACEMENT_3D('',#413135,#413136,#413137); +#413135 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.51)); +#413136 = DIRECTION('',(0.,0.,-1.)); +#413137 = DIRECTION('',(-3.909955984538E-07,-1.,-0.)); +#413138 = ADVANCED_FACE('',(#413139),#413155,.T.); +#413139 = FACE_BOUND('',#413140,.T.); +#413140 = EDGE_LOOP('',(#413141,#413142,#413148,#413149)); +#413141 = ORIENTED_EDGE('',*,*,#413119,.T.); +#413142 = ORIENTED_EDGE('',*,*,#413143,.T.); +#413143 = EDGE_CURVE('',#413111,#412911,#413144,.T.); +#413144 = LINE('',#413145,#413146); +#413145 = CARTESIAN_POINT('',(139.65,-153.63,1.55)); +#413146 = VECTOR('',#413147,1.); +#413147 = DIRECTION('',(0.,1.,0.)); +#413148 = ORIENTED_EDGE('',*,*,#412908,.F.); +#413149 = ORIENTED_EDGE('',*,*,#413150,.F.); +#413150 = EDGE_CURVE('',#413120,#412909,#413151,.T.); +#413151 = LINE('',#413152,#413153); +#413152 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#413153 = VECTOR('',#413154,1.); +#413154 = DIRECTION('',(0.,1.,0.)); +#413155 = PLANE('',#413156); +#413156 = AXIS2_PLACEMENT_3D('',#413157,#413158,#413159); +#413157 = CARTESIAN_POINT('',(139.65,-153.63,1.51)); +#413158 = DIRECTION('',(-1.,0.,0.)); +#413159 = DIRECTION('',(0.,1.,0.)); +#413160 = ADVANCED_FACE('',(#413161),#413171,.F.); +#413161 = FACE_BOUND('',#413162,.T.); +#413162 = EDGE_LOOP('',(#413163,#413164,#413165,#413166,#413167,#413168, + #413169,#413170)); +#413163 = ORIENTED_EDGE('',*,*,#412935,.T.); +#413164 = ORIENTED_EDGE('',*,*,#412967,.T.); +#413165 = ORIENTED_EDGE('',*,*,#412999,.T.); +#413166 = ORIENTED_EDGE('',*,*,#413031,.T.); +#413167 = ORIENTED_EDGE('',*,*,#413063,.T.); +#413168 = ORIENTED_EDGE('',*,*,#413095,.T.); +#413169 = ORIENTED_EDGE('',*,*,#413127,.T.); +#413170 = ORIENTED_EDGE('',*,*,#413150,.T.); +#413171 = PLANE('',#413172); +#413172 = AXIS2_PLACEMENT_3D('',#413173,#413174,#413175); +#413173 = CARTESIAN_POINT('',(0.,0.,1.51)); +#413174 = DIRECTION('',(0.,0.,1.)); +#413175 = DIRECTION('',(1.,0.,-0.)); +#413176 = ADVANCED_FACE('',(#413177),#413187,.T.); +#413177 = FACE_BOUND('',#413178,.F.); +#413178 = EDGE_LOOP('',(#413179,#413180,#413181,#413182,#413183,#413184, + #413185,#413186)); +#413179 = ORIENTED_EDGE('',*,*,#412918,.T.); +#413180 = ORIENTED_EDGE('',*,*,#412951,.T.); +#413181 = ORIENTED_EDGE('',*,*,#412982,.T.); +#413182 = ORIENTED_EDGE('',*,*,#413015,.T.); +#413183 = ORIENTED_EDGE('',*,*,#413046,.T.); +#413184 = ORIENTED_EDGE('',*,*,#413079,.T.); +#413185 = ORIENTED_EDGE('',*,*,#413110,.T.); +#413186 = ORIENTED_EDGE('',*,*,#413143,.T.); +#413187 = PLANE('',#413188); +#413188 = AXIS2_PLACEMENT_3D('',#413189,#413190,#413191); +#413189 = CARTESIAN_POINT('',(0.,0.,1.55)); +#413190 = DIRECTION('',(0.,0.,1.)); +#413191 = DIRECTION('',(1.,0.,-0.)); +#413192 = MANIFOLD_SOLID_BREP('',#413193); +#413193 = CLOSED_SHELL('',(#413194,#413236,#413267,#413300,#413331, + #413364,#413395,#413428,#413450,#413466)); +#413194 = ADVANCED_FACE('',(#413195),#413231,.T.); +#413195 = FACE_BOUND('',#413196,.T.); +#413196 = EDGE_LOOP('',(#413197,#413207,#413216,#413224)); +#413197 = ORIENTED_EDGE('',*,*,#413198,.T.); +#413198 = EDGE_CURVE('',#413199,#413201,#413203,.T.); +#413199 = VERTEX_POINT('',#413200); +#413200 = CARTESIAN_POINT('',(134.75,-152.48,1.51)); +#413201 = VERTEX_POINT('',#413202); +#413202 = CARTESIAN_POINT('',(134.75,-152.48,1.55)); +#413203 = LINE('',#413204,#413205); +#413204 = CARTESIAN_POINT('',(134.75,-152.48,1.51)); +#413205 = VECTOR('',#413206,1.); +#413206 = DIRECTION('',(0.,0.,1.)); +#413207 = ORIENTED_EDGE('',*,*,#413208,.T.); +#413208 = EDGE_CURVE('',#413201,#413209,#413211,.T.); +#413209 = VERTEX_POINT('',#413210); +#413210 = CARTESIAN_POINT('',(134.9,-152.33,1.55)); +#413211 = CIRCLE('',#413212,0.150000058649); +#413212 = AXIS2_PLACEMENT_3D('',#413213,#413214,#413215); +#413213 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.55)); +#413214 = DIRECTION('',(0.,0.,-1.)); +#413215 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#413216 = ORIENTED_EDGE('',*,*,#413217,.F.); +#413217 = EDGE_CURVE('',#413218,#413209,#413220,.T.); +#413218 = VERTEX_POINT('',#413219); +#413219 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#413220 = LINE('',#413221,#413222); +#413221 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#413222 = VECTOR('',#413223,1.); +#413223 = DIRECTION('',(0.,0.,1.)); +#413224 = ORIENTED_EDGE('',*,*,#413225,.F.); +#413225 = EDGE_CURVE('',#413199,#413218,#413226,.T.); +#413226 = CIRCLE('',#413227,0.150000058649); +#413227 = AXIS2_PLACEMENT_3D('',#413228,#413229,#413230); +#413228 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.51)); +#413229 = DIRECTION('',(0.,0.,-1.)); +#413230 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#413231 = CYLINDRICAL_SURFACE('',#413232,0.150000058649); +#413232 = AXIS2_PLACEMENT_3D('',#413233,#413234,#413235); +#413233 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.51)); +#413234 = DIRECTION('',(0.,0.,-1.)); +#413235 = DIRECTION('',(-1.,3.90995219498E-07,0.)); +#413236 = ADVANCED_FACE('',(#413237),#413262,.T.); +#413237 = FACE_BOUND('',#413238,.T.); +#413238 = EDGE_LOOP('',(#413239,#413240,#413248,#413256)); +#413239 = ORIENTED_EDGE('',*,*,#413217,.T.); +#413240 = ORIENTED_EDGE('',*,*,#413241,.T.); +#413241 = EDGE_CURVE('',#413209,#413242,#413244,.T.); +#413242 = VERTEX_POINT('',#413243); +#413243 = CARTESIAN_POINT('',(135.2,-152.33,1.55)); +#413244 = LINE('',#413245,#413246); +#413245 = CARTESIAN_POINT('',(134.9,-152.33,1.55)); +#413246 = VECTOR('',#413247,1.); +#413247 = DIRECTION('',(1.,0.,0.)); +#413248 = ORIENTED_EDGE('',*,*,#413249,.F.); +#413249 = EDGE_CURVE('',#413250,#413242,#413252,.T.); +#413250 = VERTEX_POINT('',#413251); +#413251 = CARTESIAN_POINT('',(135.2,-152.33,1.51)); +#413252 = LINE('',#413253,#413254); +#413253 = CARTESIAN_POINT('',(135.2,-152.33,1.51)); +#413254 = VECTOR('',#413255,1.); +#413255 = DIRECTION('',(0.,0.,1.)); +#413256 = ORIENTED_EDGE('',*,*,#413257,.F.); +#413257 = EDGE_CURVE('',#413218,#413250,#413258,.T.); +#413258 = LINE('',#413259,#413260); +#413259 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#413260 = VECTOR('',#413261,1.); +#413261 = DIRECTION('',(1.,0.,0.)); +#413262 = PLANE('',#413263); +#413263 = AXIS2_PLACEMENT_3D('',#413264,#413265,#413266); +#413264 = CARTESIAN_POINT('',(134.9,-152.33,1.51)); +#413265 = DIRECTION('',(0.,1.,0.)); +#413266 = DIRECTION('',(1.,0.,0.)); +#413267 = ADVANCED_FACE('',(#413268),#413295,.T.); +#413268 = FACE_BOUND('',#413269,.T.); +#413269 = EDGE_LOOP('',(#413270,#413271,#413280,#413288)); +#413270 = ORIENTED_EDGE('',*,*,#413249,.T.); +#413271 = ORIENTED_EDGE('',*,*,#413272,.T.); +#413272 = EDGE_CURVE('',#413242,#413273,#413275,.T.); +#413273 = VERTEX_POINT('',#413274); +#413274 = CARTESIAN_POINT('',(135.35,-152.48,1.55)); +#413275 = CIRCLE('',#413276,0.150000058649); +#413276 = AXIS2_PLACEMENT_3D('',#413277,#413278,#413279); +#413277 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.55)); +#413278 = DIRECTION('',(0.,0.,-1.)); +#413279 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#413280 = ORIENTED_EDGE('',*,*,#413281,.F.); +#413281 = EDGE_CURVE('',#413282,#413273,#413284,.T.); +#413282 = VERTEX_POINT('',#413283); +#413283 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#413284 = LINE('',#413285,#413286); +#413285 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#413286 = VECTOR('',#413287,1.); +#413287 = DIRECTION('',(0.,0.,1.)); +#413288 = ORIENTED_EDGE('',*,*,#413289,.F.); +#413289 = EDGE_CURVE('',#413250,#413282,#413290,.T.); +#413290 = CIRCLE('',#413291,0.150000058649); +#413291 = AXIS2_PLACEMENT_3D('',#413292,#413293,#413294); +#413292 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.51)); +#413293 = DIRECTION('',(0.,0.,-1.)); +#413294 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#413295 = CYLINDRICAL_SURFACE('',#413296,0.150000058649); +#413296 = AXIS2_PLACEMENT_3D('',#413297,#413298,#413299); +#413297 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.51)); +#413298 = DIRECTION('',(0.,0.,-1.)); +#413299 = DIRECTION('',(3.90995219498E-07,1.,0.)); +#413300 = ADVANCED_FACE('',(#413301),#413326,.T.); +#413301 = FACE_BOUND('',#413302,.T.); +#413302 = EDGE_LOOP('',(#413303,#413304,#413312,#413320)); +#413303 = ORIENTED_EDGE('',*,*,#413281,.T.); +#413304 = ORIENTED_EDGE('',*,*,#413305,.T.); +#413305 = EDGE_CURVE('',#413273,#413306,#413308,.T.); +#413306 = VERTEX_POINT('',#413307); +#413307 = CARTESIAN_POINT('',(135.35,-153.63,1.55)); +#413308 = LINE('',#413309,#413310); +#413309 = CARTESIAN_POINT('',(135.35,-152.48,1.55)); +#413310 = VECTOR('',#413311,1.); +#413311 = DIRECTION('',(0.,-1.,0.)); +#413312 = ORIENTED_EDGE('',*,*,#413313,.F.); +#413313 = EDGE_CURVE('',#413314,#413306,#413316,.T.); +#413314 = VERTEX_POINT('',#413315); +#413315 = CARTESIAN_POINT('',(135.35,-153.63,1.51)); +#413316 = LINE('',#413317,#413318); +#413317 = CARTESIAN_POINT('',(135.35,-153.63,1.51)); +#413318 = VECTOR('',#413319,1.); +#413319 = DIRECTION('',(0.,0.,1.)); +#413320 = ORIENTED_EDGE('',*,*,#413321,.F.); +#413321 = EDGE_CURVE('',#413282,#413314,#413322,.T.); +#413322 = LINE('',#413323,#413324); +#413323 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#413324 = VECTOR('',#413325,1.); +#413325 = DIRECTION('',(0.,-1.,0.)); +#413326 = PLANE('',#413327); +#413327 = AXIS2_PLACEMENT_3D('',#413328,#413329,#413330); +#413328 = CARTESIAN_POINT('',(135.35,-152.48,1.51)); +#413329 = DIRECTION('',(1.,0.,-0.)); +#413330 = DIRECTION('',(0.,-1.,0.)); +#413331 = ADVANCED_FACE('',(#413332),#413359,.T.); +#413332 = FACE_BOUND('',#413333,.T.); +#413333 = EDGE_LOOP('',(#413334,#413335,#413344,#413352)); +#413334 = ORIENTED_EDGE('',*,*,#413313,.T.); +#413335 = ORIENTED_EDGE('',*,*,#413336,.T.); +#413336 = EDGE_CURVE('',#413306,#413337,#413339,.T.); +#413337 = VERTEX_POINT('',#413338); +#413338 = CARTESIAN_POINT('',(135.2,-153.78,1.55)); +#413339 = CIRCLE('',#413340,0.150000058649); +#413340 = AXIS2_PLACEMENT_3D('',#413341,#413342,#413343); +#413341 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.55)); +#413342 = DIRECTION('',(0.,0.,-1.)); +#413343 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#413344 = ORIENTED_EDGE('',*,*,#413345,.F.); +#413345 = EDGE_CURVE('',#413346,#413337,#413348,.T.); +#413346 = VERTEX_POINT('',#413347); +#413347 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#413348 = LINE('',#413349,#413350); +#413349 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#413350 = VECTOR('',#413351,1.); +#413351 = DIRECTION('',(0.,0.,1.)); +#413352 = ORIENTED_EDGE('',*,*,#413353,.F.); +#413353 = EDGE_CURVE('',#413314,#413346,#413354,.T.); +#413354 = CIRCLE('',#413355,0.150000058649); +#413355 = AXIS2_PLACEMENT_3D('',#413356,#413357,#413358); +#413356 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.51)); +#413357 = DIRECTION('',(0.,0.,-1.)); +#413358 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#413359 = CYLINDRICAL_SURFACE('',#413360,0.150000058649); +#413360 = AXIS2_PLACEMENT_3D('',#413361,#413362,#413363); +#413361 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.51)); +#413362 = DIRECTION('',(0.,0.,-1.)); +#413363 = DIRECTION('',(1.,-3.909955984538E-07,0.)); +#413364 = ADVANCED_FACE('',(#413365),#413390,.T.); +#413365 = FACE_BOUND('',#413366,.T.); +#413366 = EDGE_LOOP('',(#413367,#413368,#413376,#413384)); +#413367 = ORIENTED_EDGE('',*,*,#413345,.T.); +#413368 = ORIENTED_EDGE('',*,*,#413369,.T.); +#413369 = EDGE_CURVE('',#413337,#413370,#413372,.T.); +#413370 = VERTEX_POINT('',#413371); +#413371 = CARTESIAN_POINT('',(134.9,-153.78,1.55)); +#413372 = LINE('',#413373,#413374); +#413373 = CARTESIAN_POINT('',(135.2,-153.78,1.55)); +#413374 = VECTOR('',#413375,1.); +#413375 = DIRECTION('',(-1.,0.,0.)); +#413376 = ORIENTED_EDGE('',*,*,#413377,.F.); +#413377 = EDGE_CURVE('',#413378,#413370,#413380,.T.); +#413378 = VERTEX_POINT('',#413379); +#413379 = CARTESIAN_POINT('',(134.9,-153.78,1.51)); +#413380 = LINE('',#413381,#413382); +#413381 = CARTESIAN_POINT('',(134.9,-153.78,1.51)); +#413382 = VECTOR('',#413383,1.); +#413383 = DIRECTION('',(0.,0.,1.)); +#413384 = ORIENTED_EDGE('',*,*,#413385,.F.); +#413385 = EDGE_CURVE('',#413346,#413378,#413386,.T.); +#413386 = LINE('',#413387,#413388); +#413387 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#413388 = VECTOR('',#413389,1.); +#413389 = DIRECTION('',(-1.,0.,0.)); +#413390 = PLANE('',#413391); +#413391 = AXIS2_PLACEMENT_3D('',#413392,#413393,#413394); +#413392 = CARTESIAN_POINT('',(135.2,-153.78,1.51)); +#413393 = DIRECTION('',(0.,-1.,0.)); +#413394 = DIRECTION('',(-1.,0.,0.)); +#413395 = ADVANCED_FACE('',(#413396),#413423,.T.); +#413396 = FACE_BOUND('',#413397,.T.); +#413397 = EDGE_LOOP('',(#413398,#413399,#413408,#413416)); +#413398 = ORIENTED_EDGE('',*,*,#413377,.T.); +#413399 = ORIENTED_EDGE('',*,*,#413400,.T.); +#413400 = EDGE_CURVE('',#413370,#413401,#413403,.T.); +#413401 = VERTEX_POINT('',#413402); +#413402 = CARTESIAN_POINT('',(134.75,-153.63,1.55)); +#413403 = CIRCLE('',#413404,0.150000058649); +#413404 = AXIS2_PLACEMENT_3D('',#413405,#413406,#413407); +#413405 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.55)); +#413406 = DIRECTION('',(0.,0.,-1.)); +#413407 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#413408 = ORIENTED_EDGE('',*,*,#413409,.F.); +#413409 = EDGE_CURVE('',#413410,#413401,#413412,.T.); +#413410 = VERTEX_POINT('',#413411); +#413411 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#413412 = LINE('',#413413,#413414); +#413413 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#413414 = VECTOR('',#413415,1.); +#413415 = DIRECTION('',(0.,0.,1.)); +#413416 = ORIENTED_EDGE('',*,*,#413417,.F.); +#413417 = EDGE_CURVE('',#413378,#413410,#413418,.T.); +#413418 = CIRCLE('',#413419,0.150000058649); +#413419 = AXIS2_PLACEMENT_3D('',#413420,#413421,#413422); +#413420 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.51)); +#413421 = DIRECTION('',(0.,0.,-1.)); +#413422 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#413423 = CYLINDRICAL_SURFACE('',#413424,0.150000058649); +#413424 = AXIS2_PLACEMENT_3D('',#413425,#413426,#413427); +#413425 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.51)); +#413426 = DIRECTION('',(0.,0.,-1.)); +#413427 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#413428 = ADVANCED_FACE('',(#413429),#413445,.T.); +#413429 = FACE_BOUND('',#413430,.T.); +#413430 = EDGE_LOOP('',(#413431,#413432,#413438,#413439)); +#413431 = ORIENTED_EDGE('',*,*,#413409,.T.); +#413432 = ORIENTED_EDGE('',*,*,#413433,.T.); +#413433 = EDGE_CURVE('',#413401,#413201,#413434,.T.); +#413434 = LINE('',#413435,#413436); +#413435 = CARTESIAN_POINT('',(134.75,-153.63,1.55)); +#413436 = VECTOR('',#413437,1.); +#413437 = DIRECTION('',(0.,1.,0.)); +#413438 = ORIENTED_EDGE('',*,*,#413198,.F.); +#413439 = ORIENTED_EDGE('',*,*,#413440,.F.); +#413440 = EDGE_CURVE('',#413410,#413199,#413441,.T.); +#413441 = LINE('',#413442,#413443); +#413442 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#413443 = VECTOR('',#413444,1.); +#413444 = DIRECTION('',(0.,1.,0.)); +#413445 = PLANE('',#413446); +#413446 = AXIS2_PLACEMENT_3D('',#413447,#413448,#413449); +#413447 = CARTESIAN_POINT('',(134.75,-153.63,1.51)); +#413448 = DIRECTION('',(-1.,0.,0.)); +#413449 = DIRECTION('',(0.,1.,0.)); +#413450 = ADVANCED_FACE('',(#413451),#413461,.F.); +#413451 = FACE_BOUND('',#413452,.T.); +#413452 = EDGE_LOOP('',(#413453,#413454,#413455,#413456,#413457,#413458, + #413459,#413460)); +#413453 = ORIENTED_EDGE('',*,*,#413225,.T.); +#413454 = ORIENTED_EDGE('',*,*,#413257,.T.); +#413455 = ORIENTED_EDGE('',*,*,#413289,.T.); +#413456 = ORIENTED_EDGE('',*,*,#413321,.T.); +#413457 = ORIENTED_EDGE('',*,*,#413353,.T.); +#413458 = ORIENTED_EDGE('',*,*,#413385,.T.); +#413459 = ORIENTED_EDGE('',*,*,#413417,.T.); +#413460 = ORIENTED_EDGE('',*,*,#413440,.T.); +#413461 = PLANE('',#413462); +#413462 = AXIS2_PLACEMENT_3D('',#413463,#413464,#413465); +#413463 = CARTESIAN_POINT('',(0.,0.,1.51)); +#413464 = DIRECTION('',(0.,0.,1.)); +#413465 = DIRECTION('',(1.,0.,-0.)); +#413466 = ADVANCED_FACE('',(#413467),#413477,.T.); +#413467 = FACE_BOUND('',#413468,.F.); +#413468 = EDGE_LOOP('',(#413469,#413470,#413471,#413472,#413473,#413474, + #413475,#413476)); +#413469 = ORIENTED_EDGE('',*,*,#413208,.T.); +#413470 = ORIENTED_EDGE('',*,*,#413241,.T.); +#413471 = ORIENTED_EDGE('',*,*,#413272,.T.); +#413472 = ORIENTED_EDGE('',*,*,#413305,.T.); +#413473 = ORIENTED_EDGE('',*,*,#413336,.T.); +#413474 = ORIENTED_EDGE('',*,*,#413369,.T.); +#413475 = ORIENTED_EDGE('',*,*,#413400,.T.); +#413476 = ORIENTED_EDGE('',*,*,#413433,.T.); +#413477 = PLANE('',#413478); +#413478 = AXIS2_PLACEMENT_3D('',#413479,#413480,#413481); +#413479 = CARTESIAN_POINT('',(0.,0.,1.55)); +#413480 = DIRECTION('',(0.,0.,1.)); +#413481 = DIRECTION('',(1.,0.,-0.)); +#413482 = MANIFOLD_SOLID_BREP('',#413483); +#413483 = CLOSED_SHELL('',(#413484,#413526,#413557,#413590,#413621, + #413654,#413685,#413718,#413740,#413756)); +#413484 = ADVANCED_FACE('',(#413485),#413521,.T.); +#413485 = FACE_BOUND('',#413486,.F.); +#413486 = EDGE_LOOP('',(#413487,#413497,#413506,#413514)); +#413487 = ORIENTED_EDGE('',*,*,#413488,.T.); +#413488 = EDGE_CURVE('',#413489,#413491,#413493,.T.); +#413489 = VERTEX_POINT('',#413490); +#413490 = CARTESIAN_POINT('',(137.175,-154.9625,0.)); +#413491 = VERTEX_POINT('',#413492); +#413492 = CARTESIAN_POINT('',(137.175,-154.9625,-4.E-02)); +#413493 = LINE('',#413494,#413495); +#413494 = CARTESIAN_POINT('',(137.175,-154.9625,0.)); +#413495 = VECTOR('',#413496,1.); +#413496 = DIRECTION('',(0.,0.,-1.)); +#413497 = ORIENTED_EDGE('',*,*,#413498,.T.); +#413498 = EDGE_CURVE('',#413491,#413499,#413501,.T.); +#413499 = VERTEX_POINT('',#413500); +#413500 = CARTESIAN_POINT('',(137.2875,-154.85,-4.E-02)); +#413501 = CIRCLE('',#413502,0.112498336922); +#413502 = AXIS2_PLACEMENT_3D('',#413503,#413504,#413505); +#413503 = CARTESIAN_POINT('',(137.28749833691,-154.9624983369,-4.E-02)); +#413504 = DIRECTION('',(0.,0.,-1.)); +#413505 = DIRECTION('',(-0.999999999891,-1.47832419295E-05,-0.)); +#413506 = ORIENTED_EDGE('',*,*,#413507,.F.); +#413507 = EDGE_CURVE('',#413508,#413499,#413510,.T.); +#413508 = VERTEX_POINT('',#413509); +#413509 = CARTESIAN_POINT('',(137.2875,-154.85,0.)); +#413510 = LINE('',#413511,#413512); +#413511 = CARTESIAN_POINT('',(137.2875,-154.85,0.)); +#413512 = VECTOR('',#413513,1.); +#413513 = DIRECTION('',(0.,0.,-1.)); +#413514 = ORIENTED_EDGE('',*,*,#413515,.F.); +#413515 = EDGE_CURVE('',#413489,#413508,#413516,.T.); +#413516 = CIRCLE('',#413517,0.112498336922); +#413517 = AXIS2_PLACEMENT_3D('',#413518,#413519,#413520); +#413518 = CARTESIAN_POINT('',(137.28749833691,-154.9624983369,0.)); +#413519 = DIRECTION('',(0.,0.,-1.)); +#413520 = DIRECTION('',(-0.999999999891,-1.47832419295E-05,-0.)); +#413521 = CYLINDRICAL_SURFACE('',#413522,0.112498336922); +#413522 = AXIS2_PLACEMENT_3D('',#413523,#413524,#413525); +#413523 = CARTESIAN_POINT('',(137.28749833691,-154.9624983369,0.)); +#413524 = DIRECTION('',(-0.,-0.,1.)); +#413525 = DIRECTION('',(-0.999999999891,-1.47832419295E-05,-0.)); +#413526 = ADVANCED_FACE('',(#413527),#413552,.F.); +#413527 = FACE_BOUND('',#413528,.F.); +#413528 = EDGE_LOOP('',(#413529,#413530,#413538,#413546)); +#413529 = ORIENTED_EDGE('',*,*,#413507,.T.); +#413530 = ORIENTED_EDGE('',*,*,#413531,.T.); +#413531 = EDGE_CURVE('',#413499,#413532,#413534,.T.); +#413532 = VERTEX_POINT('',#413533); +#413533 = CARTESIAN_POINT('',(137.5125,-154.85,-4.E-02)); +#413534 = LINE('',#413535,#413536); +#413535 = CARTESIAN_POINT('',(137.2875,-154.85,-4.E-02)); +#413536 = VECTOR('',#413537,1.); +#413537 = DIRECTION('',(1.,0.,0.)); +#413538 = ORIENTED_EDGE('',*,*,#413539,.F.); +#413539 = EDGE_CURVE('',#413540,#413532,#413542,.T.); +#413540 = VERTEX_POINT('',#413541); +#413541 = CARTESIAN_POINT('',(137.5125,-154.85,0.)); +#413542 = LINE('',#413543,#413544); +#413543 = CARTESIAN_POINT('',(137.5125,-154.85,0.)); +#413544 = VECTOR('',#413545,1.); +#413545 = DIRECTION('',(0.,0.,-1.)); +#413546 = ORIENTED_EDGE('',*,*,#413547,.F.); +#413547 = EDGE_CURVE('',#413508,#413540,#413548,.T.); +#413548 = LINE('',#413549,#413550); +#413549 = CARTESIAN_POINT('',(137.2875,-154.85,0.)); +#413550 = VECTOR('',#413551,1.); +#413551 = DIRECTION('',(1.,0.,0.)); +#413552 = PLANE('',#413553); +#413553 = AXIS2_PLACEMENT_3D('',#413554,#413555,#413556); +#413554 = CARTESIAN_POINT('',(137.2875,-154.85,0.)); +#413555 = DIRECTION('',(0.,-1.,0.)); +#413556 = DIRECTION('',(1.,0.,0.)); +#413557 = ADVANCED_FACE('',(#413558),#413585,.T.); +#413558 = FACE_BOUND('',#413559,.F.); +#413559 = EDGE_LOOP('',(#413560,#413561,#413570,#413578)); +#413560 = ORIENTED_EDGE('',*,*,#413539,.T.); +#413561 = ORIENTED_EDGE('',*,*,#413562,.T.); +#413562 = EDGE_CURVE('',#413532,#413563,#413565,.T.); +#413563 = VERTEX_POINT('',#413564); +#413564 = CARTESIAN_POINT('',(137.625,-154.9625,-4.E-02)); +#413565 = CIRCLE('',#413566,0.112498336922); +#413566 = AXIS2_PLACEMENT_3D('',#413567,#413568,#413569); +#413567 = CARTESIAN_POINT('',(137.51250166309,-154.9624983369,-4.E-02)); +#413568 = DIRECTION('',(0.,0.,-1.)); +#413569 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#413570 = ORIENTED_EDGE('',*,*,#413571,.F.); +#413571 = EDGE_CURVE('',#413572,#413563,#413574,.T.); +#413572 = VERTEX_POINT('',#413573); +#413573 = CARTESIAN_POINT('',(137.625,-154.9625,0.)); +#413574 = LINE('',#413575,#413576); +#413575 = CARTESIAN_POINT('',(137.625,-154.9625,0.)); +#413576 = VECTOR('',#413577,1.); +#413577 = DIRECTION('',(0.,0.,-1.)); +#413578 = ORIENTED_EDGE('',*,*,#413579,.F.); +#413579 = EDGE_CURVE('',#413540,#413572,#413580,.T.); +#413580 = CIRCLE('',#413581,0.112498336922); +#413581 = AXIS2_PLACEMENT_3D('',#413582,#413583,#413584); +#413582 = CARTESIAN_POINT('',(137.51250166309,-154.9624983369,0.)); +#413583 = DIRECTION('',(0.,0.,-1.)); +#413584 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#413585 = CYLINDRICAL_SURFACE('',#413586,0.112498336922); +#413586 = AXIS2_PLACEMENT_3D('',#413587,#413588,#413589); +#413587 = CARTESIAN_POINT('',(137.51250166309,-154.9624983369,0.)); +#413588 = DIRECTION('',(-0.,-0.,1.)); +#413589 = DIRECTION('',(-1.478324218215E-05,0.999999999891,0.)); +#413590 = ADVANCED_FACE('',(#413591),#413616,.F.); +#413591 = FACE_BOUND('',#413592,.F.); +#413592 = EDGE_LOOP('',(#413593,#413594,#413602,#413610)); +#413593 = ORIENTED_EDGE('',*,*,#413571,.T.); +#413594 = ORIENTED_EDGE('',*,*,#413595,.T.); +#413595 = EDGE_CURVE('',#413563,#413596,#413598,.T.); +#413596 = VERTEX_POINT('',#413597); +#413597 = CARTESIAN_POINT('',(137.625,-155.3375,-4.E-02)); +#413598 = LINE('',#413599,#413600); +#413599 = CARTESIAN_POINT('',(137.625,-154.9625,-4.E-02)); +#413600 = VECTOR('',#413601,1.); +#413601 = DIRECTION('',(0.,-1.,0.)); +#413602 = ORIENTED_EDGE('',*,*,#413603,.F.); +#413603 = EDGE_CURVE('',#413604,#413596,#413606,.T.); +#413604 = VERTEX_POINT('',#413605); +#413605 = CARTESIAN_POINT('',(137.625,-155.3375,0.)); +#413606 = LINE('',#413607,#413608); +#413607 = CARTESIAN_POINT('',(137.625,-155.3375,0.)); +#413608 = VECTOR('',#413609,1.); +#413609 = DIRECTION('',(0.,0.,-1.)); +#413610 = ORIENTED_EDGE('',*,*,#413611,.F.); +#413611 = EDGE_CURVE('',#413572,#413604,#413612,.T.); +#413612 = LINE('',#413613,#413614); +#413613 = CARTESIAN_POINT('',(137.625,-154.9625,0.)); +#413614 = VECTOR('',#413615,1.); +#413615 = DIRECTION('',(0.,-1.,0.)); +#413616 = PLANE('',#413617); +#413617 = AXIS2_PLACEMENT_3D('',#413618,#413619,#413620); +#413618 = CARTESIAN_POINT('',(137.625,-154.9625,0.)); +#413619 = DIRECTION('',(-1.,-0.,-0.)); +#413620 = DIRECTION('',(0.,-1.,0.)); +#413621 = ADVANCED_FACE('',(#413622),#413649,.T.); +#413622 = FACE_BOUND('',#413623,.F.); +#413623 = EDGE_LOOP('',(#413624,#413625,#413634,#413642)); +#413624 = ORIENTED_EDGE('',*,*,#413603,.T.); +#413625 = ORIENTED_EDGE('',*,*,#413626,.T.); +#413626 = EDGE_CURVE('',#413596,#413627,#413629,.T.); +#413627 = VERTEX_POINT('',#413628); +#413628 = CARTESIAN_POINT('',(137.5125,-155.45,-4.E-02)); +#413629 = CIRCLE('',#413630,0.112498336922); +#413630 = AXIS2_PLACEMENT_3D('',#413631,#413632,#413633); +#413631 = CARTESIAN_POINT('',(137.51250166309,-155.337501663,-4.E-02)); +#413632 = DIRECTION('',(0.,0.,-1.)); +#413633 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#413634 = ORIENTED_EDGE('',*,*,#413635,.F.); +#413635 = EDGE_CURVE('',#413636,#413627,#413638,.T.); +#413636 = VERTEX_POINT('',#413637); +#413637 = CARTESIAN_POINT('',(137.5125,-155.45,0.)); +#413638 = LINE('',#413639,#413640); +#413639 = CARTESIAN_POINT('',(137.5125,-155.45,0.)); +#413640 = VECTOR('',#413641,1.); +#413641 = DIRECTION('',(0.,0.,-1.)); +#413642 = ORIENTED_EDGE('',*,*,#413643,.F.); +#413643 = EDGE_CURVE('',#413604,#413636,#413644,.T.); +#413644 = CIRCLE('',#413645,0.112498336922); +#413645 = AXIS2_PLACEMENT_3D('',#413646,#413647,#413648); +#413646 = CARTESIAN_POINT('',(137.51250166309,-155.337501663,0.)); +#413647 = DIRECTION('',(0.,0.,-1.)); +#413648 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#413649 = CYLINDRICAL_SURFACE('',#413650,0.112498336922); +#413650 = AXIS2_PLACEMENT_3D('',#413651,#413652,#413653); +#413651 = CARTESIAN_POINT('',(137.51250166309,-155.337501663,0.)); +#413652 = DIRECTION('',(-0.,-0.,1.)); +#413653 = DIRECTION('',(0.999999999891,1.478324192951E-05,0.)); +#413654 = ADVANCED_FACE('',(#413655),#413680,.F.); +#413655 = FACE_BOUND('',#413656,.F.); +#413656 = EDGE_LOOP('',(#413657,#413658,#413666,#413674)); +#413657 = ORIENTED_EDGE('',*,*,#413635,.T.); +#413658 = ORIENTED_EDGE('',*,*,#413659,.T.); +#413659 = EDGE_CURVE('',#413627,#413660,#413662,.T.); +#413660 = VERTEX_POINT('',#413661); +#413661 = CARTESIAN_POINT('',(137.2875,-155.45,-4.E-02)); +#413662 = LINE('',#413663,#413664); +#413663 = CARTESIAN_POINT('',(137.5125,-155.45,-4.E-02)); +#413664 = VECTOR('',#413665,1.); +#413665 = DIRECTION('',(-1.,0.,0.)); +#413666 = ORIENTED_EDGE('',*,*,#413667,.F.); +#413667 = EDGE_CURVE('',#413668,#413660,#413670,.T.); +#413668 = VERTEX_POINT('',#413669); +#413669 = CARTESIAN_POINT('',(137.2875,-155.45,0.)); +#413670 = LINE('',#413671,#413672); +#413671 = CARTESIAN_POINT('',(137.2875,-155.45,0.)); +#413672 = VECTOR('',#413673,1.); +#413673 = DIRECTION('',(0.,0.,-1.)); +#413674 = ORIENTED_EDGE('',*,*,#413675,.F.); +#413675 = EDGE_CURVE('',#413636,#413668,#413676,.T.); +#413676 = LINE('',#413677,#413678); +#413677 = CARTESIAN_POINT('',(137.5125,-155.45,0.)); +#413678 = VECTOR('',#413679,1.); +#413679 = DIRECTION('',(-1.,0.,0.)); +#413680 = PLANE('',#413681); +#413681 = AXIS2_PLACEMENT_3D('',#413682,#413683,#413684); +#413682 = CARTESIAN_POINT('',(137.5125,-155.45,0.)); +#413683 = DIRECTION('',(0.,1.,0.)); +#413684 = DIRECTION('',(-1.,0.,0.)); +#413685 = ADVANCED_FACE('',(#413686),#413713,.T.); +#413686 = FACE_BOUND('',#413687,.F.); +#413687 = EDGE_LOOP('',(#413688,#413689,#413698,#413706)); +#413688 = ORIENTED_EDGE('',*,*,#413667,.T.); +#413689 = ORIENTED_EDGE('',*,*,#413690,.T.); +#413690 = EDGE_CURVE('',#413660,#413691,#413693,.T.); +#413691 = VERTEX_POINT('',#413692); +#413692 = CARTESIAN_POINT('',(137.175,-155.3375,-4.E-02)); +#413693 = CIRCLE('',#413694,0.112498336922); +#413694 = AXIS2_PLACEMENT_3D('',#413695,#413696,#413697); +#413695 = CARTESIAN_POINT('',(137.28749833691,-155.337501663,-4.E-02)); +#413696 = DIRECTION('',(0.,0.,-1.)); +#413697 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#413698 = ORIENTED_EDGE('',*,*,#413699,.F.); +#413699 = EDGE_CURVE('',#413700,#413691,#413702,.T.); +#413700 = VERTEX_POINT('',#413701); +#413701 = CARTESIAN_POINT('',(137.175,-155.3375,0.)); +#413702 = LINE('',#413703,#413704); +#413703 = CARTESIAN_POINT('',(137.175,-155.3375,0.)); +#413704 = VECTOR('',#413705,1.); +#413705 = DIRECTION('',(0.,0.,-1.)); +#413706 = ORIENTED_EDGE('',*,*,#413707,.F.); +#413707 = EDGE_CURVE('',#413668,#413700,#413708,.T.); +#413708 = CIRCLE('',#413709,0.112498336922); +#413709 = AXIS2_PLACEMENT_3D('',#413710,#413711,#413712); +#413710 = CARTESIAN_POINT('',(137.28749833691,-155.337501663,0.)); +#413711 = DIRECTION('',(0.,0.,-1.)); +#413712 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#413713 = CYLINDRICAL_SURFACE('',#413714,0.112498336922); +#413714 = AXIS2_PLACEMENT_3D('',#413715,#413716,#413717); +#413715 = CARTESIAN_POINT('',(137.28749833691,-155.337501663,0.)); +#413716 = DIRECTION('',(-0.,-0.,1.)); +#413717 = DIRECTION('',(1.478324192951E-05,-0.999999999891,0.)); +#413718 = ADVANCED_FACE('',(#413719),#413735,.F.); +#413719 = FACE_BOUND('',#413720,.F.); +#413720 = EDGE_LOOP('',(#413721,#413722,#413728,#413729)); +#413721 = ORIENTED_EDGE('',*,*,#413699,.T.); +#413722 = ORIENTED_EDGE('',*,*,#413723,.T.); +#413723 = EDGE_CURVE('',#413691,#413491,#413724,.T.); +#413724 = LINE('',#413725,#413726); +#413725 = CARTESIAN_POINT('',(137.175,-155.3375,-4.E-02)); +#413726 = VECTOR('',#413727,1.); +#413727 = DIRECTION('',(0.,1.,0.)); +#413728 = ORIENTED_EDGE('',*,*,#413488,.F.); +#413729 = ORIENTED_EDGE('',*,*,#413730,.F.); +#413730 = EDGE_CURVE('',#413700,#413489,#413731,.T.); +#413731 = LINE('',#413732,#413733); +#413732 = CARTESIAN_POINT('',(137.175,-155.3375,0.)); +#413733 = VECTOR('',#413734,1.); +#413734 = DIRECTION('',(0.,1.,0.)); +#413735 = PLANE('',#413736); +#413736 = AXIS2_PLACEMENT_3D('',#413737,#413738,#413739); +#413737 = CARTESIAN_POINT('',(137.175,-155.3375,0.)); +#413738 = DIRECTION('',(1.,-0.,0.)); +#413739 = DIRECTION('',(0.,1.,0.)); +#413740 = ADVANCED_FACE('',(#413741),#413751,.F.); +#413741 = FACE_BOUND('',#413742,.F.); +#413742 = EDGE_LOOP('',(#413743,#413744,#413745,#413746,#413747,#413748, + #413749,#413750)); +#413743 = ORIENTED_EDGE('',*,*,#413515,.T.); +#413744 = ORIENTED_EDGE('',*,*,#413547,.T.); +#413745 = ORIENTED_EDGE('',*,*,#413579,.T.); +#413746 = ORIENTED_EDGE('',*,*,#413611,.T.); +#413747 = ORIENTED_EDGE('',*,*,#413643,.T.); +#413748 = ORIENTED_EDGE('',*,*,#413675,.T.); +#413749 = ORIENTED_EDGE('',*,*,#413707,.T.); +#413750 = ORIENTED_EDGE('',*,*,#413730,.T.); +#413751 = PLANE('',#413752); +#413752 = AXIS2_PLACEMENT_3D('',#413753,#413754,#413755); +#413753 = CARTESIAN_POINT('',(0.,0.,0.)); +#413754 = DIRECTION('',(-0.,-0.,-1.)); +#413755 = DIRECTION('',(-1.,0.,0.)); +#413756 = ADVANCED_FACE('',(#413757),#413767,.T.); +#413757 = FACE_BOUND('',#413758,.T.); +#413758 = EDGE_LOOP('',(#413759,#413760,#413761,#413762,#413763,#413764, + #413765,#413766)); +#413759 = ORIENTED_EDGE('',*,*,#413498,.T.); +#413760 = ORIENTED_EDGE('',*,*,#413531,.T.); +#413761 = ORIENTED_EDGE('',*,*,#413562,.T.); +#413762 = ORIENTED_EDGE('',*,*,#413595,.T.); +#413763 = ORIENTED_EDGE('',*,*,#413626,.T.); +#413764 = ORIENTED_EDGE('',*,*,#413659,.T.); +#413765 = ORIENTED_EDGE('',*,*,#413690,.T.); +#413766 = ORIENTED_EDGE('',*,*,#413723,.T.); +#413767 = PLANE('',#413768); +#413768 = AXIS2_PLACEMENT_3D('',#413769,#413770,#413771); +#413769 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#413770 = DIRECTION('',(-0.,-0.,-1.)); +#413771 = DIRECTION('',(-1.,0.,0.)); +#413772 = MANIFOLD_SOLID_BREP('',#413773); +#413773 = CLOSED_SHELL('',(#413774,#413816,#413847,#413880,#413911, + #413944,#413975,#414008,#414030,#414046)); +#413774 = ADVANCED_FACE('',(#413775),#413811,.T.); +#413775 = FACE_BOUND('',#413776,.F.); +#413776 = EDGE_LOOP('',(#413777,#413787,#413796,#413804)); +#413777 = ORIENTED_EDGE('',*,*,#413778,.T.); +#413778 = EDGE_CURVE('',#413779,#413781,#413783,.T.); +#413779 = VERTEX_POINT('',#413780); +#413780 = CARTESIAN_POINT('',(129.69,-117.9,0.)); +#413781 = VERTEX_POINT('',#413782); +#413782 = CARTESIAN_POINT('',(129.69,-117.9,-4.E-02)); +#413783 = LINE('',#413784,#413785); +#413784 = CARTESIAN_POINT('',(129.69,-117.9,0.)); +#413785 = VECTOR('',#413786,1.); +#413786 = DIRECTION('',(0.,0.,-1.)); +#413787 = ORIENTED_EDGE('',*,*,#413788,.T.); +#413788 = EDGE_CURVE('',#413781,#413789,#413791,.T.); +#413789 = VERTEX_POINT('',#413790); +#413790 = CARTESIAN_POINT('',(129.83,-117.76,-4.E-02)); +#413791 = CIRCLE('',#413792,0.139999827125); +#413792 = AXIS2_PLACEMENT_3D('',#413793,#413794,#413795); +#413793 = CARTESIAN_POINT('',(129.82999982712,-117.8999998271,-4.E-02)); +#413794 = DIRECTION('',(0.,0.,-1.)); +#413795 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#413796 = ORIENTED_EDGE('',*,*,#413797,.F.); +#413797 = EDGE_CURVE('',#413798,#413789,#413800,.T.); +#413798 = VERTEX_POINT('',#413799); +#413799 = CARTESIAN_POINT('',(129.83,-117.76,0.)); +#413800 = LINE('',#413801,#413802); +#413801 = CARTESIAN_POINT('',(129.83,-117.76,0.)); +#413802 = VECTOR('',#413803,1.); +#413803 = DIRECTION('',(0.,0.,-1.)); +#413804 = ORIENTED_EDGE('',*,*,#413805,.F.); +#413805 = EDGE_CURVE('',#413779,#413798,#413806,.T.); +#413806 = CIRCLE('',#413807,0.139999827125); +#413807 = AXIS2_PLACEMENT_3D('',#413808,#413809,#413810); +#413808 = CARTESIAN_POINT('',(129.82999982712,-117.8999998271,0.)); +#413809 = DIRECTION('',(0.,0.,-1.)); +#413810 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#413811 = CYLINDRICAL_SURFACE('',#413812,0.139999827125); +#413812 = AXIS2_PLACEMENT_3D('',#413813,#413814,#413815); +#413813 = CARTESIAN_POINT('',(129.82999982712,-117.8999998271,0.)); +#413814 = DIRECTION('',(-0.,-0.,1.)); +#413815 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#413816 = ADVANCED_FACE('',(#413817),#413842,.F.); +#413817 = FACE_BOUND('',#413818,.F.); +#413818 = EDGE_LOOP('',(#413819,#413820,#413828,#413836)); +#413819 = ORIENTED_EDGE('',*,*,#413797,.T.); +#413820 = ORIENTED_EDGE('',*,*,#413821,.T.); +#413821 = EDGE_CURVE('',#413789,#413822,#413824,.T.); +#413822 = VERTEX_POINT('',#413823); +#413823 = CARTESIAN_POINT('',(130.17,-117.76,-4.E-02)); +#413824 = LINE('',#413825,#413826); +#413825 = CARTESIAN_POINT('',(129.83,-117.76,-4.E-02)); +#413826 = VECTOR('',#413827,1.); +#413827 = DIRECTION('',(1.,0.,0.)); +#413828 = ORIENTED_EDGE('',*,*,#413829,.F.); +#413829 = EDGE_CURVE('',#413830,#413822,#413832,.T.); +#413830 = VERTEX_POINT('',#413831); +#413831 = CARTESIAN_POINT('',(130.17,-117.76,0.)); +#413832 = LINE('',#413833,#413834); +#413833 = CARTESIAN_POINT('',(130.17,-117.76,0.)); +#413834 = VECTOR('',#413835,1.); +#413835 = DIRECTION('',(0.,0.,-1.)); +#413836 = ORIENTED_EDGE('',*,*,#413837,.F.); +#413837 = EDGE_CURVE('',#413798,#413830,#413838,.T.); +#413838 = LINE('',#413839,#413840); +#413839 = CARTESIAN_POINT('',(129.83,-117.76,0.)); +#413840 = VECTOR('',#413841,1.); +#413841 = DIRECTION('',(1.,0.,0.)); +#413842 = PLANE('',#413843); +#413843 = AXIS2_PLACEMENT_3D('',#413844,#413845,#413846); +#413844 = CARTESIAN_POINT('',(129.83,-117.76,0.)); +#413845 = DIRECTION('',(0.,-1.,0.)); +#413846 = DIRECTION('',(1.,0.,0.)); +#413847 = ADVANCED_FACE('',(#413848),#413875,.T.); +#413848 = FACE_BOUND('',#413849,.F.); +#413849 = EDGE_LOOP('',(#413850,#413851,#413860,#413868)); +#413850 = ORIENTED_EDGE('',*,*,#413829,.T.); +#413851 = ORIENTED_EDGE('',*,*,#413852,.T.); +#413852 = EDGE_CURVE('',#413822,#413853,#413855,.T.); +#413853 = VERTEX_POINT('',#413854); +#413854 = CARTESIAN_POINT('',(130.31,-117.9,-4.E-02)); +#413855 = CIRCLE('',#413856,0.139999827125); +#413856 = AXIS2_PLACEMENT_3D('',#413857,#413858,#413859); +#413857 = CARTESIAN_POINT('',(130.17000017287,-117.8999998271,-4.E-02)); +#413858 = DIRECTION('',(0.,0.,-1.)); +#413859 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#413860 = ORIENTED_EDGE('',*,*,#413861,.F.); +#413861 = EDGE_CURVE('',#413862,#413853,#413864,.T.); +#413862 = VERTEX_POINT('',#413863); +#413863 = CARTESIAN_POINT('',(130.31,-117.9,0.)); +#413864 = LINE('',#413865,#413866); +#413865 = CARTESIAN_POINT('',(130.31,-117.9,0.)); +#413866 = VECTOR('',#413867,1.); +#413867 = DIRECTION('',(0.,0.,-1.)); +#413868 = ORIENTED_EDGE('',*,*,#413869,.F.); +#413869 = EDGE_CURVE('',#413830,#413862,#413870,.T.); +#413870 = CIRCLE('',#413871,0.139999827125); +#413871 = AXIS2_PLACEMENT_3D('',#413872,#413873,#413874); +#413872 = CARTESIAN_POINT('',(130.17000017287,-117.8999998271,0.)); +#413873 = DIRECTION('',(0.,0.,-1.)); +#413874 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#413875 = CYLINDRICAL_SURFACE('',#413876,0.139999827125); +#413876 = AXIS2_PLACEMENT_3D('',#413877,#413878,#413879); +#413877 = CARTESIAN_POINT('',(130.17000017287,-117.8999998271,0.)); +#413878 = DIRECTION('',(-0.,-0.,1.)); +#413879 = DIRECTION('',(-1.234820451253E-06,0.999999999999,0.)); +#413880 = ADVANCED_FACE('',(#413881),#413906,.F.); +#413881 = FACE_BOUND('',#413882,.F.); +#413882 = EDGE_LOOP('',(#413883,#413884,#413892,#413900)); +#413883 = ORIENTED_EDGE('',*,*,#413861,.T.); +#413884 = ORIENTED_EDGE('',*,*,#413885,.T.); +#413885 = EDGE_CURVE('',#413853,#413886,#413888,.T.); +#413886 = VERTEX_POINT('',#413887); +#413887 = CARTESIAN_POINT('',(130.31,-118.18,-4.E-02)); +#413888 = LINE('',#413889,#413890); +#413889 = CARTESIAN_POINT('',(130.31,-117.9,-4.E-02)); +#413890 = VECTOR('',#413891,1.); +#413891 = DIRECTION('',(0.,-1.,0.)); +#413892 = ORIENTED_EDGE('',*,*,#413893,.F.); +#413893 = EDGE_CURVE('',#413894,#413886,#413896,.T.); +#413894 = VERTEX_POINT('',#413895); +#413895 = CARTESIAN_POINT('',(130.31,-118.18,0.)); +#413896 = LINE('',#413897,#413898); +#413897 = CARTESIAN_POINT('',(130.31,-118.18,0.)); +#413898 = VECTOR('',#413899,1.); +#413899 = DIRECTION('',(0.,0.,-1.)); +#413900 = ORIENTED_EDGE('',*,*,#413901,.F.); +#413901 = EDGE_CURVE('',#413862,#413894,#413902,.T.); +#413902 = LINE('',#413903,#413904); +#413903 = CARTESIAN_POINT('',(130.31,-117.9,0.)); +#413904 = VECTOR('',#413905,1.); +#413905 = DIRECTION('',(0.,-1.,0.)); +#413906 = PLANE('',#413907); +#413907 = AXIS2_PLACEMENT_3D('',#413908,#413909,#413910); +#413908 = CARTESIAN_POINT('',(130.31,-117.9,0.)); +#413909 = DIRECTION('',(-1.,-0.,-0.)); +#413910 = DIRECTION('',(0.,-1.,0.)); +#413911 = ADVANCED_FACE('',(#413912),#413939,.T.); +#413912 = FACE_BOUND('',#413913,.F.); +#413913 = EDGE_LOOP('',(#413914,#413915,#413924,#413932)); +#413914 = ORIENTED_EDGE('',*,*,#413893,.T.); +#413915 = ORIENTED_EDGE('',*,*,#413916,.T.); +#413916 = EDGE_CURVE('',#413886,#413917,#413919,.T.); +#413917 = VERTEX_POINT('',#413918); +#413918 = CARTESIAN_POINT('',(130.17,-118.32,-4.E-02)); +#413919 = CIRCLE('',#413920,0.139999827125); +#413920 = AXIS2_PLACEMENT_3D('',#413921,#413922,#413923); +#413921 = CARTESIAN_POINT('',(130.17000017287,-118.1800001728,-4.E-02)); +#413922 = DIRECTION('',(0.,0.,-1.)); +#413923 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#413924 = ORIENTED_EDGE('',*,*,#413925,.F.); +#413925 = EDGE_CURVE('',#413926,#413917,#413928,.T.); +#413926 = VERTEX_POINT('',#413927); +#413927 = CARTESIAN_POINT('',(130.17,-118.32,0.)); +#413928 = LINE('',#413929,#413930); +#413929 = CARTESIAN_POINT('',(130.17,-118.32,0.)); +#413930 = VECTOR('',#413931,1.); +#413931 = DIRECTION('',(0.,0.,-1.)); +#413932 = ORIENTED_EDGE('',*,*,#413933,.F.); +#413933 = EDGE_CURVE('',#413894,#413926,#413934,.T.); +#413934 = CIRCLE('',#413935,0.139999827125); +#413935 = AXIS2_PLACEMENT_3D('',#413936,#413937,#413938); +#413936 = CARTESIAN_POINT('',(130.17000017287,-118.1800001728,0.)); +#413937 = DIRECTION('',(0.,0.,-1.)); +#413938 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#413939 = CYLINDRICAL_SURFACE('',#413940,0.139999827125); +#413940 = AXIS2_PLACEMENT_3D('',#413941,#413942,#413943); +#413941 = CARTESIAN_POINT('',(130.17000017287,-118.1800001728,0.)); +#413942 = DIRECTION('',(-0.,-0.,1.)); +#413943 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#413944 = ADVANCED_FACE('',(#413945),#413970,.F.); +#413945 = FACE_BOUND('',#413946,.F.); +#413946 = EDGE_LOOP('',(#413947,#413948,#413956,#413964)); +#413947 = ORIENTED_EDGE('',*,*,#413925,.T.); +#413948 = ORIENTED_EDGE('',*,*,#413949,.T.); +#413949 = EDGE_CURVE('',#413917,#413950,#413952,.T.); +#413950 = VERTEX_POINT('',#413951); +#413951 = CARTESIAN_POINT('',(129.83,-118.32,-4.E-02)); +#413952 = LINE('',#413953,#413954); +#413953 = CARTESIAN_POINT('',(130.17,-118.32,-4.E-02)); +#413954 = VECTOR('',#413955,1.); +#413955 = DIRECTION('',(-1.,0.,0.)); +#413956 = ORIENTED_EDGE('',*,*,#413957,.F.); +#413957 = EDGE_CURVE('',#413958,#413950,#413960,.T.); +#413958 = VERTEX_POINT('',#413959); +#413959 = CARTESIAN_POINT('',(129.83,-118.32,0.)); +#413960 = LINE('',#413961,#413962); +#413961 = CARTESIAN_POINT('',(129.83,-118.32,0.)); +#413962 = VECTOR('',#413963,1.); +#413963 = DIRECTION('',(0.,0.,-1.)); +#413964 = ORIENTED_EDGE('',*,*,#413965,.F.); +#413965 = EDGE_CURVE('',#413926,#413958,#413966,.T.); +#413966 = LINE('',#413967,#413968); +#413967 = CARTESIAN_POINT('',(130.17,-118.32,0.)); +#413968 = VECTOR('',#413969,1.); +#413969 = DIRECTION('',(-1.,0.,0.)); +#413970 = PLANE('',#413971); +#413971 = AXIS2_PLACEMENT_3D('',#413972,#413973,#413974); +#413972 = CARTESIAN_POINT('',(130.17,-118.32,0.)); +#413973 = DIRECTION('',(0.,1.,0.)); +#413974 = DIRECTION('',(-1.,0.,0.)); +#413975 = ADVANCED_FACE('',(#413976),#414003,.T.); +#413976 = FACE_BOUND('',#413977,.F.); +#413977 = EDGE_LOOP('',(#413978,#413979,#413988,#413996)); +#413978 = ORIENTED_EDGE('',*,*,#413957,.T.); +#413979 = ORIENTED_EDGE('',*,*,#413980,.T.); +#413980 = EDGE_CURVE('',#413950,#413981,#413983,.T.); +#413981 = VERTEX_POINT('',#413982); +#413982 = CARTESIAN_POINT('',(129.69,-118.18,-4.E-02)); +#413983 = CIRCLE('',#413984,0.139999827125); +#413984 = AXIS2_PLACEMENT_3D('',#413985,#413986,#413987); +#413985 = CARTESIAN_POINT('',(129.82999982712,-118.1800001728,-4.E-02)); +#413986 = DIRECTION('',(0.,0.,-1.)); +#413987 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#413988 = ORIENTED_EDGE('',*,*,#413989,.F.); +#413989 = EDGE_CURVE('',#413990,#413981,#413992,.T.); +#413990 = VERTEX_POINT('',#413991); +#413991 = CARTESIAN_POINT('',(129.69,-118.18,0.)); +#413992 = LINE('',#413993,#413994); +#413993 = CARTESIAN_POINT('',(129.69,-118.18,0.)); +#413994 = VECTOR('',#413995,1.); +#413995 = DIRECTION('',(0.,0.,-1.)); +#413996 = ORIENTED_EDGE('',*,*,#413997,.F.); +#413997 = EDGE_CURVE('',#413958,#413990,#413998,.T.); +#413998 = CIRCLE('',#413999,0.139999827125); +#413999 = AXIS2_PLACEMENT_3D('',#414000,#414001,#414002); +#414000 = CARTESIAN_POINT('',(129.82999982712,-118.1800001728,0.)); +#414001 = DIRECTION('',(0.,0.,-1.)); +#414002 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#414003 = CYLINDRICAL_SURFACE('',#414004,0.139999827125); +#414004 = AXIS2_PLACEMENT_3D('',#414005,#414006,#414007); +#414005 = CARTESIAN_POINT('',(129.82999982712,-118.1800001728,0.)); +#414006 = DIRECTION('',(-0.,-0.,1.)); +#414007 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#414008 = ADVANCED_FACE('',(#414009),#414025,.F.); +#414009 = FACE_BOUND('',#414010,.F.); +#414010 = EDGE_LOOP('',(#414011,#414012,#414018,#414019)); +#414011 = ORIENTED_EDGE('',*,*,#413989,.T.); +#414012 = ORIENTED_EDGE('',*,*,#414013,.T.); +#414013 = EDGE_CURVE('',#413981,#413781,#414014,.T.); +#414014 = LINE('',#414015,#414016); +#414015 = CARTESIAN_POINT('',(129.69,-118.18,-4.E-02)); +#414016 = VECTOR('',#414017,1.); +#414017 = DIRECTION('',(0.,1.,0.)); +#414018 = ORIENTED_EDGE('',*,*,#413778,.F.); +#414019 = ORIENTED_EDGE('',*,*,#414020,.F.); +#414020 = EDGE_CURVE('',#413990,#413779,#414021,.T.); +#414021 = LINE('',#414022,#414023); +#414022 = CARTESIAN_POINT('',(129.69,-118.18,0.)); +#414023 = VECTOR('',#414024,1.); +#414024 = DIRECTION('',(0.,1.,0.)); +#414025 = PLANE('',#414026); +#414026 = AXIS2_PLACEMENT_3D('',#414027,#414028,#414029); +#414027 = CARTESIAN_POINT('',(129.69,-118.18,0.)); +#414028 = DIRECTION('',(1.,-0.,0.)); +#414029 = DIRECTION('',(0.,1.,0.)); +#414030 = ADVANCED_FACE('',(#414031),#414041,.F.); +#414031 = FACE_BOUND('',#414032,.F.); +#414032 = EDGE_LOOP('',(#414033,#414034,#414035,#414036,#414037,#414038, + #414039,#414040)); +#414033 = ORIENTED_EDGE('',*,*,#413805,.T.); +#414034 = ORIENTED_EDGE('',*,*,#413837,.T.); +#414035 = ORIENTED_EDGE('',*,*,#413869,.T.); +#414036 = ORIENTED_EDGE('',*,*,#413901,.T.); +#414037 = ORIENTED_EDGE('',*,*,#413933,.T.); +#414038 = ORIENTED_EDGE('',*,*,#413965,.T.); +#414039 = ORIENTED_EDGE('',*,*,#413997,.T.); +#414040 = ORIENTED_EDGE('',*,*,#414020,.T.); +#414041 = PLANE('',#414042); +#414042 = AXIS2_PLACEMENT_3D('',#414043,#414044,#414045); +#414043 = CARTESIAN_POINT('',(0.,0.,0.)); +#414044 = DIRECTION('',(-0.,-0.,-1.)); +#414045 = DIRECTION('',(-1.,0.,0.)); +#414046 = ADVANCED_FACE('',(#414047),#414057,.T.); +#414047 = FACE_BOUND('',#414048,.T.); +#414048 = EDGE_LOOP('',(#414049,#414050,#414051,#414052,#414053,#414054, + #414055,#414056)); +#414049 = ORIENTED_EDGE('',*,*,#413788,.T.); +#414050 = ORIENTED_EDGE('',*,*,#413821,.T.); +#414051 = ORIENTED_EDGE('',*,*,#413852,.T.); +#414052 = ORIENTED_EDGE('',*,*,#413885,.T.); +#414053 = ORIENTED_EDGE('',*,*,#413916,.T.); +#414054 = ORIENTED_EDGE('',*,*,#413949,.T.); +#414055 = ORIENTED_EDGE('',*,*,#413980,.T.); +#414056 = ORIENTED_EDGE('',*,*,#414013,.T.); +#414057 = PLANE('',#414058); +#414058 = AXIS2_PLACEMENT_3D('',#414059,#414060,#414061); +#414059 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#414060 = DIRECTION('',(-0.,-0.,-1.)); +#414061 = DIRECTION('',(-1.,0.,0.)); +#414062 = MANIFOLD_SOLID_BREP('',#414063); +#414063 = CLOSED_SHELL('',(#414064,#414106,#414137,#414170,#414201, + #414234,#414265,#414298,#414320,#414336)); +#414064 = ADVANCED_FACE('',(#414065),#414101,.T.); +#414065 = FACE_BOUND('',#414066,.F.); +#414066 = EDGE_LOOP('',(#414067,#414077,#414086,#414094)); +#414067 = ORIENTED_EDGE('',*,*,#414068,.T.); +#414068 = EDGE_CURVE('',#414069,#414071,#414073,.T.); +#414069 = VERTEX_POINT('',#414070); +#414070 = CARTESIAN_POINT('',(127.5,-117.525,0.)); +#414071 = VERTEX_POINT('',#414072); +#414072 = CARTESIAN_POINT('',(127.5,-117.525,-4.E-02)); +#414073 = LINE('',#414074,#414075); +#414074 = CARTESIAN_POINT('',(127.5,-117.525,0.)); +#414075 = VECTOR('',#414076,1.); +#414076 = DIRECTION('',(0.,0.,-1.)); +#414077 = ORIENTED_EDGE('',*,*,#414078,.T.); +#414078 = EDGE_CURVE('',#414071,#414079,#414081,.T.); +#414079 = VERTEX_POINT('',#414080); +#414080 = CARTESIAN_POINT('',(127.75,-117.275,-4.E-02)); +#414081 = CIRCLE('',#414082,0.249998959685); +#414082 = AXIS2_PLACEMENT_3D('',#414083,#414084,#414085); +#414083 = CARTESIAN_POINT('',(127.74999895968,-117.5249989596,-4.E-02)); +#414084 = DIRECTION('',(0.,0.,-1.)); +#414085 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#414086 = ORIENTED_EDGE('',*,*,#414087,.F.); +#414087 = EDGE_CURVE('',#414088,#414079,#414090,.T.); +#414088 = VERTEX_POINT('',#414089); +#414089 = CARTESIAN_POINT('',(127.75,-117.275,0.)); +#414090 = LINE('',#414091,#414092); +#414091 = CARTESIAN_POINT('',(127.75,-117.275,0.)); +#414092 = VECTOR('',#414093,1.); +#414093 = DIRECTION('',(0.,0.,-1.)); +#414094 = ORIENTED_EDGE('',*,*,#414095,.F.); +#414095 = EDGE_CURVE('',#414069,#414088,#414096,.T.); +#414096 = CIRCLE('',#414097,0.249998959685); +#414097 = AXIS2_PLACEMENT_3D('',#414098,#414099,#414100); +#414098 = CARTESIAN_POINT('',(127.74999895968,-117.5249989596,0.)); +#414099 = DIRECTION('',(0.,0.,-1.)); +#414100 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#414101 = CYLINDRICAL_SURFACE('',#414102,0.249998959685); +#414102 = AXIS2_PLACEMENT_3D('',#414103,#414104,#414105); +#414103 = CARTESIAN_POINT('',(127.74999895968,-117.5249989596,0.)); +#414104 = DIRECTION('',(-0.,-0.,1.)); +#414105 = DIRECTION('',(-0.999999999991,-4.16128589391E-06,-0.)); +#414106 = ADVANCED_FACE('',(#414107),#414132,.F.); +#414107 = FACE_BOUND('',#414108,.F.); +#414108 = EDGE_LOOP('',(#414109,#414110,#414118,#414126)); +#414109 = ORIENTED_EDGE('',*,*,#414087,.T.); +#414110 = ORIENTED_EDGE('',*,*,#414111,.T.); +#414111 = EDGE_CURVE('',#414079,#414112,#414114,.T.); +#414112 = VERTEX_POINT('',#414113); +#414113 = CARTESIAN_POINT('',(128.25,-117.275,-4.E-02)); +#414114 = LINE('',#414115,#414116); +#414115 = CARTESIAN_POINT('',(127.75,-117.275,-4.E-02)); +#414116 = VECTOR('',#414117,1.); +#414117 = DIRECTION('',(1.,0.,0.)); +#414118 = ORIENTED_EDGE('',*,*,#414119,.F.); +#414119 = EDGE_CURVE('',#414120,#414112,#414122,.T.); +#414120 = VERTEX_POINT('',#414121); +#414121 = CARTESIAN_POINT('',(128.25,-117.275,0.)); +#414122 = LINE('',#414123,#414124); +#414123 = CARTESIAN_POINT('',(128.25,-117.275,0.)); +#414124 = VECTOR('',#414125,1.); +#414125 = DIRECTION('',(0.,0.,-1.)); +#414126 = ORIENTED_EDGE('',*,*,#414127,.F.); +#414127 = EDGE_CURVE('',#414088,#414120,#414128,.T.); +#414128 = LINE('',#414129,#414130); +#414129 = CARTESIAN_POINT('',(127.75,-117.275,0.)); +#414130 = VECTOR('',#414131,1.); +#414131 = DIRECTION('',(1.,0.,0.)); +#414132 = PLANE('',#414133); +#414133 = AXIS2_PLACEMENT_3D('',#414134,#414135,#414136); +#414134 = CARTESIAN_POINT('',(127.75,-117.275,0.)); +#414135 = DIRECTION('',(0.,-1.,0.)); +#414136 = DIRECTION('',(1.,0.,0.)); +#414137 = ADVANCED_FACE('',(#414138),#414165,.T.); +#414138 = FACE_BOUND('',#414139,.F.); +#414139 = EDGE_LOOP('',(#414140,#414141,#414150,#414158)); +#414140 = ORIENTED_EDGE('',*,*,#414119,.T.); +#414141 = ORIENTED_EDGE('',*,*,#414142,.T.); +#414142 = EDGE_CURVE('',#414112,#414143,#414145,.T.); +#414143 = VERTEX_POINT('',#414144); +#414144 = CARTESIAN_POINT('',(128.5,-117.525,-4.E-02)); +#414145 = CIRCLE('',#414146,0.249998959685); +#414146 = AXIS2_PLACEMENT_3D('',#414147,#414148,#414149); +#414147 = CARTESIAN_POINT('',(128.25000104031,-117.5249989596,-4.E-02)); +#414148 = DIRECTION('',(0.,0.,-1.)); +#414149 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#414150 = ORIENTED_EDGE('',*,*,#414151,.F.); +#414151 = EDGE_CURVE('',#414152,#414143,#414154,.T.); +#414152 = VERTEX_POINT('',#414153); +#414153 = CARTESIAN_POINT('',(128.5,-117.525,0.)); +#414154 = LINE('',#414155,#414156); +#414155 = CARTESIAN_POINT('',(128.5,-117.525,0.)); +#414156 = VECTOR('',#414157,1.); +#414157 = DIRECTION('',(0.,0.,-1.)); +#414158 = ORIENTED_EDGE('',*,*,#414159,.F.); +#414159 = EDGE_CURVE('',#414120,#414152,#414160,.T.); +#414160 = CIRCLE('',#414161,0.249998959685); +#414161 = AXIS2_PLACEMENT_3D('',#414162,#414163,#414164); +#414162 = CARTESIAN_POINT('',(128.25000104031,-117.5249989596,0.)); +#414163 = DIRECTION('',(0.,0.,-1.)); +#414164 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#414165 = CYLINDRICAL_SURFACE('',#414166,0.249998959685); +#414166 = AXIS2_PLACEMENT_3D('',#414167,#414168,#414169); +#414167 = CARTESIAN_POINT('',(128.25000104031,-117.5249989596,0.)); +#414168 = DIRECTION('',(-0.,-0.,1.)); +#414169 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#414170 = ADVANCED_FACE('',(#414171),#414196,.F.); +#414171 = FACE_BOUND('',#414172,.F.); +#414172 = EDGE_LOOP('',(#414173,#414174,#414182,#414190)); +#414173 = ORIENTED_EDGE('',*,*,#414151,.T.); +#414174 = ORIENTED_EDGE('',*,*,#414175,.T.); +#414175 = EDGE_CURVE('',#414143,#414176,#414178,.T.); +#414176 = VERTEX_POINT('',#414177); +#414177 = CARTESIAN_POINT('',(128.5,-118.475,-4.E-02)); +#414178 = LINE('',#414179,#414180); +#414179 = CARTESIAN_POINT('',(128.5,-117.525,-4.E-02)); +#414180 = VECTOR('',#414181,1.); +#414181 = DIRECTION('',(0.,-1.,0.)); +#414182 = ORIENTED_EDGE('',*,*,#414183,.F.); +#414183 = EDGE_CURVE('',#414184,#414176,#414186,.T.); +#414184 = VERTEX_POINT('',#414185); +#414185 = CARTESIAN_POINT('',(128.5,-118.475,0.)); +#414186 = LINE('',#414187,#414188); +#414187 = CARTESIAN_POINT('',(128.5,-118.475,0.)); +#414188 = VECTOR('',#414189,1.); +#414189 = DIRECTION('',(0.,0.,-1.)); +#414190 = ORIENTED_EDGE('',*,*,#414191,.F.); +#414191 = EDGE_CURVE('',#414152,#414184,#414192,.T.); +#414192 = LINE('',#414193,#414194); +#414193 = CARTESIAN_POINT('',(128.5,-117.525,0.)); +#414194 = VECTOR('',#414195,1.); +#414195 = DIRECTION('',(0.,-1.,0.)); +#414196 = PLANE('',#414197); +#414197 = AXIS2_PLACEMENT_3D('',#414198,#414199,#414200); +#414198 = CARTESIAN_POINT('',(128.5,-117.525,0.)); +#414199 = DIRECTION('',(-1.,-0.,-0.)); +#414200 = DIRECTION('',(0.,-1.,0.)); +#414201 = ADVANCED_FACE('',(#414202),#414229,.T.); +#414202 = FACE_BOUND('',#414203,.F.); +#414203 = EDGE_LOOP('',(#414204,#414205,#414214,#414222)); +#414204 = ORIENTED_EDGE('',*,*,#414183,.T.); +#414205 = ORIENTED_EDGE('',*,*,#414206,.T.); +#414206 = EDGE_CURVE('',#414176,#414207,#414209,.T.); +#414207 = VERTEX_POINT('',#414208); +#414208 = CARTESIAN_POINT('',(128.25,-118.725,-4.E-02)); +#414209 = CIRCLE('',#414210,0.249998959685); +#414210 = AXIS2_PLACEMENT_3D('',#414211,#414212,#414213); +#414211 = CARTESIAN_POINT('',(128.25000104031,-118.4750010403,-4.E-02)); +#414212 = DIRECTION('',(0.,0.,-1.)); +#414213 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#414214 = ORIENTED_EDGE('',*,*,#414215,.F.); +#414215 = EDGE_CURVE('',#414216,#414207,#414218,.T.); +#414216 = VERTEX_POINT('',#414217); +#414217 = CARTESIAN_POINT('',(128.25,-118.725,0.)); +#414218 = LINE('',#414219,#414220); +#414219 = CARTESIAN_POINT('',(128.25,-118.725,0.)); +#414220 = VECTOR('',#414221,1.); +#414221 = DIRECTION('',(0.,0.,-1.)); +#414222 = ORIENTED_EDGE('',*,*,#414223,.F.); +#414223 = EDGE_CURVE('',#414184,#414216,#414224,.T.); +#414224 = CIRCLE('',#414225,0.249998959685); +#414225 = AXIS2_PLACEMENT_3D('',#414226,#414227,#414228); +#414226 = CARTESIAN_POINT('',(128.25000104031,-118.4750010403,0.)); +#414227 = DIRECTION('',(0.,0.,-1.)); +#414228 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#414229 = CYLINDRICAL_SURFACE('',#414230,0.249998959685); +#414230 = AXIS2_PLACEMENT_3D('',#414231,#414232,#414233); +#414231 = CARTESIAN_POINT('',(128.25000104031,-118.4750010403,0.)); +#414232 = DIRECTION('',(-0.,-0.,1.)); +#414233 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#414234 = ADVANCED_FACE('',(#414235),#414260,.F.); +#414235 = FACE_BOUND('',#414236,.F.); +#414236 = EDGE_LOOP('',(#414237,#414238,#414246,#414254)); +#414237 = ORIENTED_EDGE('',*,*,#414215,.T.); +#414238 = ORIENTED_EDGE('',*,*,#414239,.T.); +#414239 = EDGE_CURVE('',#414207,#414240,#414242,.T.); +#414240 = VERTEX_POINT('',#414241); +#414241 = CARTESIAN_POINT('',(127.75,-118.725,-4.E-02)); +#414242 = LINE('',#414243,#414244); +#414243 = CARTESIAN_POINT('',(128.25,-118.725,-4.E-02)); +#414244 = VECTOR('',#414245,1.); +#414245 = DIRECTION('',(-1.,0.,0.)); +#414246 = ORIENTED_EDGE('',*,*,#414247,.F.); +#414247 = EDGE_CURVE('',#414248,#414240,#414250,.T.); +#414248 = VERTEX_POINT('',#414249); +#414249 = CARTESIAN_POINT('',(127.75,-118.725,0.)); +#414250 = LINE('',#414251,#414252); +#414251 = CARTESIAN_POINT('',(127.75,-118.725,0.)); +#414252 = VECTOR('',#414253,1.); +#414253 = DIRECTION('',(0.,0.,-1.)); +#414254 = ORIENTED_EDGE('',*,*,#414255,.F.); +#414255 = EDGE_CURVE('',#414216,#414248,#414256,.T.); +#414256 = LINE('',#414257,#414258); +#414257 = CARTESIAN_POINT('',(128.25,-118.725,0.)); +#414258 = VECTOR('',#414259,1.); +#414259 = DIRECTION('',(-1.,0.,0.)); +#414260 = PLANE('',#414261); +#414261 = AXIS2_PLACEMENT_3D('',#414262,#414263,#414264); +#414262 = CARTESIAN_POINT('',(128.25,-118.725,0.)); +#414263 = DIRECTION('',(0.,1.,0.)); +#414264 = DIRECTION('',(-1.,0.,0.)); +#414265 = ADVANCED_FACE('',(#414266),#414293,.T.); +#414266 = FACE_BOUND('',#414267,.F.); +#414267 = EDGE_LOOP('',(#414268,#414269,#414278,#414286)); +#414268 = ORIENTED_EDGE('',*,*,#414247,.T.); +#414269 = ORIENTED_EDGE('',*,*,#414270,.T.); +#414270 = EDGE_CURVE('',#414240,#414271,#414273,.T.); +#414271 = VERTEX_POINT('',#414272); +#414272 = CARTESIAN_POINT('',(127.5,-118.475,-4.E-02)); +#414273 = CIRCLE('',#414274,0.249998959685); +#414274 = AXIS2_PLACEMENT_3D('',#414275,#414276,#414277); +#414275 = CARTESIAN_POINT('',(127.74999895968,-118.4750010403,-4.E-02)); +#414276 = DIRECTION('',(0.,0.,-1.)); +#414277 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#414278 = ORIENTED_EDGE('',*,*,#414279,.F.); +#414279 = EDGE_CURVE('',#414280,#414271,#414282,.T.); +#414280 = VERTEX_POINT('',#414281); +#414281 = CARTESIAN_POINT('',(127.5,-118.475,0.)); +#414282 = LINE('',#414283,#414284); +#414283 = CARTESIAN_POINT('',(127.5,-118.475,0.)); +#414284 = VECTOR('',#414285,1.); +#414285 = DIRECTION('',(0.,0.,-1.)); +#414286 = ORIENTED_EDGE('',*,*,#414287,.F.); +#414287 = EDGE_CURVE('',#414248,#414280,#414288,.T.); +#414288 = CIRCLE('',#414289,0.249998959685); +#414289 = AXIS2_PLACEMENT_3D('',#414290,#414291,#414292); +#414290 = CARTESIAN_POINT('',(127.74999895968,-118.4750010403,0.)); +#414291 = DIRECTION('',(0.,0.,-1.)); +#414292 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#414293 = CYLINDRICAL_SURFACE('',#414294,0.249998959685); +#414294 = AXIS2_PLACEMENT_3D('',#414295,#414296,#414297); +#414295 = CARTESIAN_POINT('',(127.74999895968,-118.4750010403,0.)); +#414296 = DIRECTION('',(-0.,-0.,1.)); +#414297 = DIRECTION('',(4.16128589391E-06,-0.999999999991,0.)); +#414298 = ADVANCED_FACE('',(#414299),#414315,.F.); +#414299 = FACE_BOUND('',#414300,.F.); +#414300 = EDGE_LOOP('',(#414301,#414302,#414308,#414309)); +#414301 = ORIENTED_EDGE('',*,*,#414279,.T.); +#414302 = ORIENTED_EDGE('',*,*,#414303,.T.); +#414303 = EDGE_CURVE('',#414271,#414071,#414304,.T.); +#414304 = LINE('',#414305,#414306); +#414305 = CARTESIAN_POINT('',(127.5,-118.475,-4.E-02)); +#414306 = VECTOR('',#414307,1.); +#414307 = DIRECTION('',(0.,1.,0.)); +#414308 = ORIENTED_EDGE('',*,*,#414068,.F.); +#414309 = ORIENTED_EDGE('',*,*,#414310,.F.); +#414310 = EDGE_CURVE('',#414280,#414069,#414311,.T.); +#414311 = LINE('',#414312,#414313); +#414312 = CARTESIAN_POINT('',(127.5,-118.475,0.)); +#414313 = VECTOR('',#414314,1.); +#414314 = DIRECTION('',(0.,1.,0.)); +#414315 = PLANE('',#414316); +#414316 = AXIS2_PLACEMENT_3D('',#414317,#414318,#414319); +#414317 = CARTESIAN_POINT('',(127.5,-118.475,0.)); +#414318 = DIRECTION('',(1.,-0.,0.)); +#414319 = DIRECTION('',(0.,1.,0.)); +#414320 = ADVANCED_FACE('',(#414321),#414331,.F.); +#414321 = FACE_BOUND('',#414322,.F.); +#414322 = EDGE_LOOP('',(#414323,#414324,#414325,#414326,#414327,#414328, + #414329,#414330)); +#414323 = ORIENTED_EDGE('',*,*,#414095,.T.); +#414324 = ORIENTED_EDGE('',*,*,#414127,.T.); +#414325 = ORIENTED_EDGE('',*,*,#414159,.T.); +#414326 = ORIENTED_EDGE('',*,*,#414191,.T.); +#414327 = ORIENTED_EDGE('',*,*,#414223,.T.); +#414328 = ORIENTED_EDGE('',*,*,#414255,.T.); +#414329 = ORIENTED_EDGE('',*,*,#414287,.T.); +#414330 = ORIENTED_EDGE('',*,*,#414310,.T.); +#414331 = PLANE('',#414332); +#414332 = AXIS2_PLACEMENT_3D('',#414333,#414334,#414335); +#414333 = CARTESIAN_POINT('',(0.,0.,0.)); +#414334 = DIRECTION('',(-0.,-0.,-1.)); +#414335 = DIRECTION('',(-1.,0.,0.)); +#414336 = ADVANCED_FACE('',(#414337),#414347,.T.); +#414337 = FACE_BOUND('',#414338,.T.); +#414338 = EDGE_LOOP('',(#414339,#414340,#414341,#414342,#414343,#414344, + #414345,#414346)); +#414339 = ORIENTED_EDGE('',*,*,#414078,.T.); +#414340 = ORIENTED_EDGE('',*,*,#414111,.T.); +#414341 = ORIENTED_EDGE('',*,*,#414142,.T.); +#414342 = ORIENTED_EDGE('',*,*,#414175,.T.); +#414343 = ORIENTED_EDGE('',*,*,#414206,.T.); +#414344 = ORIENTED_EDGE('',*,*,#414239,.T.); +#414345 = ORIENTED_EDGE('',*,*,#414270,.T.); +#414346 = ORIENTED_EDGE('',*,*,#414303,.T.); +#414347 = PLANE('',#414348); +#414348 = AXIS2_PLACEMENT_3D('',#414349,#414350,#414351); +#414349 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#414350 = DIRECTION('',(-0.,-0.,-1.)); +#414351 = DIRECTION('',(-1.,0.,0.)); +#414352 = MANIFOLD_SOLID_BREP('',#414353); +#414353 = CLOSED_SHELL('',(#414354,#414396,#414427,#414460,#414491, + #414524,#414555,#414588,#414610,#414626)); +#414354 = ADVANCED_FACE('',(#414355),#414391,.T.); +#414355 = FACE_BOUND('',#414356,.F.); +#414356 = EDGE_LOOP('',(#414357,#414367,#414376,#414384)); +#414357 = ORIENTED_EDGE('',*,*,#414358,.T.); +#414358 = EDGE_CURVE('',#414359,#414361,#414363,.T.); +#414359 = VERTEX_POINT('',#414360); +#414360 = CARTESIAN_POINT('',(131.7,-118.152,0.)); +#414361 = VERTEX_POINT('',#414362); +#414362 = CARTESIAN_POINT('',(131.7,-118.152,-4.E-02)); +#414363 = LINE('',#414364,#414365); +#414364 = CARTESIAN_POINT('',(131.7,-118.152,0.)); +#414365 = VECTOR('',#414366,1.); +#414366 = DIRECTION('',(0.,0.,-1.)); +#414367 = ORIENTED_EDGE('',*,*,#414368,.T.); +#414368 = EDGE_CURVE('',#414361,#414369,#414371,.T.); +#414369 = VERTEX_POINT('',#414370); +#414370 = CARTESIAN_POINT('',(131.752,-118.1,-4.E-02)); +#414371 = CIRCLE('',#414372,5.199847263152E-02); +#414372 = AXIS2_PLACEMENT_3D('',#414373,#414374,#414375); +#414373 = CARTESIAN_POINT('',(131.7519984726,-118.1519984726,-4.E-02)); +#414374 = DIRECTION('',(0.,0.,-1.)); +#414375 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#414376 = ORIENTED_EDGE('',*,*,#414377,.F.); +#414377 = EDGE_CURVE('',#414378,#414369,#414380,.T.); +#414378 = VERTEX_POINT('',#414379); +#414379 = CARTESIAN_POINT('',(131.752,-118.1,0.)); +#414380 = LINE('',#414381,#414382); +#414381 = CARTESIAN_POINT('',(131.752,-118.1,0.)); +#414382 = VECTOR('',#414383,1.); +#414383 = DIRECTION('',(0.,0.,-1.)); +#414384 = ORIENTED_EDGE('',*,*,#414385,.F.); +#414385 = EDGE_CURVE('',#414359,#414378,#414386,.T.); +#414386 = CIRCLE('',#414387,5.199847263152E-02); +#414387 = AXIS2_PLACEMENT_3D('',#414388,#414389,#414390); +#414388 = CARTESIAN_POINT('',(131.7519984726,-118.1519984726,0.)); +#414389 = DIRECTION('',(0.,0.,-1.)); +#414390 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#414391 = CYLINDRICAL_SURFACE('',#414392,5.199847263152E-02); +#414392 = AXIS2_PLACEMENT_3D('',#414393,#414394,#414395); +#414393 = CARTESIAN_POINT('',(131.7519984726,-118.1519984726,0.)); +#414394 = DIRECTION('',(-0.,-0.,1.)); +#414395 = DIRECTION('',(-0.999999999569,-2.937376483939E-05,-0.)); +#414396 = ADVANCED_FACE('',(#414397),#414422,.F.); +#414397 = FACE_BOUND('',#414398,.F.); +#414398 = EDGE_LOOP('',(#414399,#414400,#414408,#414416)); +#414399 = ORIENTED_EDGE('',*,*,#414377,.T.); +#414400 = ORIENTED_EDGE('',*,*,#414401,.T.); +#414401 = EDGE_CURVE('',#414369,#414402,#414404,.T.); +#414402 = VERTEX_POINT('',#414403); +#414403 = CARTESIAN_POINT('',(132.148,-118.1,-4.E-02)); +#414404 = LINE('',#414405,#414406); +#414405 = CARTESIAN_POINT('',(131.752,-118.1,-4.E-02)); +#414406 = VECTOR('',#414407,1.); +#414407 = DIRECTION('',(1.,0.,0.)); +#414408 = ORIENTED_EDGE('',*,*,#414409,.F.); +#414409 = EDGE_CURVE('',#414410,#414402,#414412,.T.); +#414410 = VERTEX_POINT('',#414411); +#414411 = CARTESIAN_POINT('',(132.148,-118.1,0.)); +#414412 = LINE('',#414413,#414414); +#414413 = CARTESIAN_POINT('',(132.148,-118.1,0.)); +#414414 = VECTOR('',#414415,1.); +#414415 = DIRECTION('',(0.,0.,-1.)); +#414416 = ORIENTED_EDGE('',*,*,#414417,.F.); +#414417 = EDGE_CURVE('',#414378,#414410,#414418,.T.); +#414418 = LINE('',#414419,#414420); +#414419 = CARTESIAN_POINT('',(131.752,-118.1,0.)); +#414420 = VECTOR('',#414421,1.); +#414421 = DIRECTION('',(1.,0.,0.)); +#414422 = PLANE('',#414423); +#414423 = AXIS2_PLACEMENT_3D('',#414424,#414425,#414426); +#414424 = CARTESIAN_POINT('',(131.752,-118.1,0.)); +#414425 = DIRECTION('',(0.,-1.,0.)); +#414426 = DIRECTION('',(1.,0.,0.)); +#414427 = ADVANCED_FACE('',(#414428),#414455,.T.); +#414428 = FACE_BOUND('',#414429,.F.); +#414429 = EDGE_LOOP('',(#414430,#414431,#414440,#414448)); +#414430 = ORIENTED_EDGE('',*,*,#414409,.T.); +#414431 = ORIENTED_EDGE('',*,*,#414432,.T.); +#414432 = EDGE_CURVE('',#414402,#414433,#414435,.T.); +#414433 = VERTEX_POINT('',#414434); +#414434 = CARTESIAN_POINT('',(132.2,-118.152,-4.E-02)); +#414435 = CIRCLE('',#414436,5.199847263154E-02); +#414436 = AXIS2_PLACEMENT_3D('',#414437,#414438,#414439); +#414437 = CARTESIAN_POINT('',(132.14800152739,-118.1519984726,-4.E-02)); +#414438 = DIRECTION('',(0.,0.,-1.)); +#414439 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#414440 = ORIENTED_EDGE('',*,*,#414441,.F.); +#414441 = EDGE_CURVE('',#414442,#414433,#414444,.T.); +#414442 = VERTEX_POINT('',#414443); +#414443 = CARTESIAN_POINT('',(132.2,-118.152,0.)); +#414444 = LINE('',#414445,#414446); +#414445 = CARTESIAN_POINT('',(132.2,-118.152,0.)); +#414446 = VECTOR('',#414447,1.); +#414447 = DIRECTION('',(0.,0.,-1.)); +#414448 = ORIENTED_EDGE('',*,*,#414449,.F.); +#414449 = EDGE_CURVE('',#414410,#414442,#414450,.T.); +#414450 = CIRCLE('',#414451,5.199847263154E-02); +#414451 = AXIS2_PLACEMENT_3D('',#414452,#414453,#414454); +#414452 = CARTESIAN_POINT('',(132.14800152739,-118.1519984726,0.)); +#414453 = DIRECTION('',(0.,0.,-1.)); +#414454 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#414455 = CYLINDRICAL_SURFACE('',#414456,5.199847263154E-02); +#414456 = AXIS2_PLACEMENT_3D('',#414457,#414458,#414459); +#414457 = CARTESIAN_POINT('',(132.14800152739,-118.1519984726,0.)); +#414458 = DIRECTION('',(-0.,-0.,1.)); +#414459 = DIRECTION('',(-2.937376429279E-05,0.999999999569,0.)); +#414460 = ADVANCED_FACE('',(#414461),#414486,.F.); +#414461 = FACE_BOUND('',#414462,.F.); +#414462 = EDGE_LOOP('',(#414463,#414464,#414472,#414480)); +#414463 = ORIENTED_EDGE('',*,*,#414441,.T.); +#414464 = ORIENTED_EDGE('',*,*,#414465,.T.); +#414465 = EDGE_CURVE('',#414433,#414466,#414468,.T.); +#414466 = VERTEX_POINT('',#414467); +#414467 = CARTESIAN_POINT('',(132.2,-118.248,-4.E-02)); +#414468 = LINE('',#414469,#414470); +#414469 = CARTESIAN_POINT('',(132.2,-118.152,-4.E-02)); +#414470 = VECTOR('',#414471,1.); +#414471 = DIRECTION('',(0.,-1.,0.)); +#414472 = ORIENTED_EDGE('',*,*,#414473,.F.); +#414473 = EDGE_CURVE('',#414474,#414466,#414476,.T.); +#414474 = VERTEX_POINT('',#414475); +#414475 = CARTESIAN_POINT('',(132.2,-118.248,0.)); +#414476 = LINE('',#414477,#414478); +#414477 = CARTESIAN_POINT('',(132.2,-118.248,0.)); +#414478 = VECTOR('',#414479,1.); +#414479 = DIRECTION('',(0.,0.,-1.)); +#414480 = ORIENTED_EDGE('',*,*,#414481,.F.); +#414481 = EDGE_CURVE('',#414442,#414474,#414482,.T.); +#414482 = LINE('',#414483,#414484); +#414483 = CARTESIAN_POINT('',(132.2,-118.152,0.)); +#414484 = VECTOR('',#414485,1.); +#414485 = DIRECTION('',(0.,-1.,0.)); +#414486 = PLANE('',#414487); +#414487 = AXIS2_PLACEMENT_3D('',#414488,#414489,#414490); +#414488 = CARTESIAN_POINT('',(132.2,-118.152,0.)); +#414489 = DIRECTION('',(-1.,-0.,-0.)); +#414490 = DIRECTION('',(0.,-1.,0.)); +#414491 = ADVANCED_FACE('',(#414492),#414519,.T.); +#414492 = FACE_BOUND('',#414493,.F.); +#414493 = EDGE_LOOP('',(#414494,#414495,#414504,#414512)); +#414494 = ORIENTED_EDGE('',*,*,#414473,.T.); +#414495 = ORIENTED_EDGE('',*,*,#414496,.T.); +#414496 = EDGE_CURVE('',#414466,#414497,#414499,.T.); +#414497 = VERTEX_POINT('',#414498); +#414498 = CARTESIAN_POINT('',(132.148,-118.3,-4.E-02)); +#414499 = CIRCLE('',#414500,5.199847263155E-02); +#414500 = AXIS2_PLACEMENT_3D('',#414501,#414502,#414503); +#414501 = CARTESIAN_POINT('',(132.14800152739,-118.2480015273,-4.E-02)); +#414502 = DIRECTION('',(0.,0.,-1.)); +#414503 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#414504 = ORIENTED_EDGE('',*,*,#414505,.F.); +#414505 = EDGE_CURVE('',#414506,#414497,#414508,.T.); +#414506 = VERTEX_POINT('',#414507); +#414507 = CARTESIAN_POINT('',(132.148,-118.3,0.)); +#414508 = LINE('',#414509,#414510); +#414509 = CARTESIAN_POINT('',(132.148,-118.3,0.)); +#414510 = VECTOR('',#414511,1.); +#414511 = DIRECTION('',(0.,0.,-1.)); +#414512 = ORIENTED_EDGE('',*,*,#414513,.F.); +#414513 = EDGE_CURVE('',#414474,#414506,#414514,.T.); +#414514 = CIRCLE('',#414515,5.199847263155E-02); +#414515 = AXIS2_PLACEMENT_3D('',#414516,#414517,#414518); +#414516 = CARTESIAN_POINT('',(132.14800152739,-118.2480015273,0.)); +#414517 = DIRECTION('',(0.,0.,-1.)); +#414518 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#414519 = CYLINDRICAL_SURFACE('',#414520,5.199847263155E-02); +#414520 = AXIS2_PLACEMENT_3D('',#414521,#414522,#414523); +#414521 = CARTESIAN_POINT('',(132.14800152739,-118.2480015273,0.)); +#414522 = DIRECTION('',(-0.,-0.,1.)); +#414523 = DIRECTION('',(0.999999999569,2.937376429279E-05,0.)); +#414524 = ADVANCED_FACE('',(#414525),#414550,.F.); +#414525 = FACE_BOUND('',#414526,.F.); +#414526 = EDGE_LOOP('',(#414527,#414528,#414536,#414544)); +#414527 = ORIENTED_EDGE('',*,*,#414505,.T.); +#414528 = ORIENTED_EDGE('',*,*,#414529,.T.); +#414529 = EDGE_CURVE('',#414497,#414530,#414532,.T.); +#414530 = VERTEX_POINT('',#414531); +#414531 = CARTESIAN_POINT('',(131.752,-118.3,-4.E-02)); +#414532 = LINE('',#414533,#414534); +#414533 = CARTESIAN_POINT('',(132.148,-118.3,-4.E-02)); +#414534 = VECTOR('',#414535,1.); +#414535 = DIRECTION('',(-1.,0.,0.)); +#414536 = ORIENTED_EDGE('',*,*,#414537,.F.); +#414537 = EDGE_CURVE('',#414538,#414530,#414540,.T.); +#414538 = VERTEX_POINT('',#414539); +#414539 = CARTESIAN_POINT('',(131.752,-118.3,0.)); +#414540 = LINE('',#414541,#414542); +#414541 = CARTESIAN_POINT('',(131.752,-118.3,0.)); +#414542 = VECTOR('',#414543,1.); +#414543 = DIRECTION('',(0.,0.,-1.)); +#414544 = ORIENTED_EDGE('',*,*,#414545,.F.); +#414545 = EDGE_CURVE('',#414506,#414538,#414546,.T.); +#414546 = LINE('',#414547,#414548); +#414547 = CARTESIAN_POINT('',(132.148,-118.3,0.)); +#414548 = VECTOR('',#414549,1.); +#414549 = DIRECTION('',(-1.,0.,0.)); +#414550 = PLANE('',#414551); +#414551 = AXIS2_PLACEMENT_3D('',#414552,#414553,#414554); +#414552 = CARTESIAN_POINT('',(132.148,-118.3,0.)); +#414553 = DIRECTION('',(0.,1.,0.)); +#414554 = DIRECTION('',(-1.,0.,0.)); +#414555 = ADVANCED_FACE('',(#414556),#414583,.T.); +#414556 = FACE_BOUND('',#414557,.F.); +#414557 = EDGE_LOOP('',(#414558,#414559,#414568,#414576)); +#414558 = ORIENTED_EDGE('',*,*,#414537,.T.); +#414559 = ORIENTED_EDGE('',*,*,#414560,.T.); +#414560 = EDGE_CURVE('',#414530,#414561,#414563,.T.); +#414561 = VERTEX_POINT('',#414562); +#414562 = CARTESIAN_POINT('',(131.7,-118.248,-4.E-02)); +#414563 = CIRCLE('',#414564,5.199847263153E-02); +#414564 = AXIS2_PLACEMENT_3D('',#414565,#414566,#414567); +#414565 = CARTESIAN_POINT('',(131.7519984726,-118.2480015273,-4.E-02)); +#414566 = DIRECTION('',(0.,0.,-1.)); +#414567 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#414568 = ORIENTED_EDGE('',*,*,#414569,.F.); +#414569 = EDGE_CURVE('',#414570,#414561,#414572,.T.); +#414570 = VERTEX_POINT('',#414571); +#414571 = CARTESIAN_POINT('',(131.7,-118.248,0.)); +#414572 = LINE('',#414573,#414574); +#414573 = CARTESIAN_POINT('',(131.7,-118.248,0.)); +#414574 = VECTOR('',#414575,1.); +#414575 = DIRECTION('',(0.,0.,-1.)); +#414576 = ORIENTED_EDGE('',*,*,#414577,.F.); +#414577 = EDGE_CURVE('',#414538,#414570,#414578,.T.); +#414578 = CIRCLE('',#414579,5.199847263153E-02); +#414579 = AXIS2_PLACEMENT_3D('',#414580,#414581,#414582); +#414580 = CARTESIAN_POINT('',(131.7519984726,-118.2480015273,0.)); +#414581 = DIRECTION('',(0.,0.,-1.)); +#414582 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#414583 = CYLINDRICAL_SURFACE('',#414584,5.199847263153E-02); +#414584 = AXIS2_PLACEMENT_3D('',#414585,#414586,#414587); +#414585 = CARTESIAN_POINT('',(131.7519984726,-118.2480015273,0.)); +#414586 = DIRECTION('',(-0.,-0.,1.)); +#414587 = DIRECTION('',(2.937376538596E-05,-0.999999999569,0.)); +#414588 = ADVANCED_FACE('',(#414589),#414605,.F.); +#414589 = FACE_BOUND('',#414590,.F.); +#414590 = EDGE_LOOP('',(#414591,#414592,#414598,#414599)); +#414591 = ORIENTED_EDGE('',*,*,#414569,.T.); +#414592 = ORIENTED_EDGE('',*,*,#414593,.T.); +#414593 = EDGE_CURVE('',#414561,#414361,#414594,.T.); +#414594 = LINE('',#414595,#414596); +#414595 = CARTESIAN_POINT('',(131.7,-118.248,-4.E-02)); +#414596 = VECTOR('',#414597,1.); +#414597 = DIRECTION('',(0.,1.,0.)); +#414598 = ORIENTED_EDGE('',*,*,#414358,.F.); +#414599 = ORIENTED_EDGE('',*,*,#414600,.F.); +#414600 = EDGE_CURVE('',#414570,#414359,#414601,.T.); +#414601 = LINE('',#414602,#414603); +#414602 = CARTESIAN_POINT('',(131.7,-118.248,0.)); +#414603 = VECTOR('',#414604,1.); +#414604 = DIRECTION('',(0.,1.,0.)); +#414605 = PLANE('',#414606); +#414606 = AXIS2_PLACEMENT_3D('',#414607,#414608,#414609); +#414607 = CARTESIAN_POINT('',(131.7,-118.248,0.)); +#414608 = DIRECTION('',(1.,-0.,0.)); +#414609 = DIRECTION('',(0.,1.,0.)); +#414610 = ADVANCED_FACE('',(#414611),#414621,.F.); +#414611 = FACE_BOUND('',#414612,.F.); +#414612 = EDGE_LOOP('',(#414613,#414614,#414615,#414616,#414617,#414618, + #414619,#414620)); +#414613 = ORIENTED_EDGE('',*,*,#414385,.T.); +#414614 = ORIENTED_EDGE('',*,*,#414417,.T.); +#414615 = ORIENTED_EDGE('',*,*,#414449,.T.); +#414616 = ORIENTED_EDGE('',*,*,#414481,.T.); +#414617 = ORIENTED_EDGE('',*,*,#414513,.T.); +#414618 = ORIENTED_EDGE('',*,*,#414545,.T.); +#414619 = ORIENTED_EDGE('',*,*,#414577,.T.); +#414620 = ORIENTED_EDGE('',*,*,#414600,.T.); +#414621 = PLANE('',#414622); +#414622 = AXIS2_PLACEMENT_3D('',#414623,#414624,#414625); +#414623 = CARTESIAN_POINT('',(0.,0.,0.)); +#414624 = DIRECTION('',(-0.,-0.,-1.)); +#414625 = DIRECTION('',(-1.,0.,0.)); +#414626 = ADVANCED_FACE('',(#414627),#414637,.T.); +#414627 = FACE_BOUND('',#414628,.T.); +#414628 = EDGE_LOOP('',(#414629,#414630,#414631,#414632,#414633,#414634, + #414635,#414636)); +#414629 = ORIENTED_EDGE('',*,*,#414368,.T.); +#414630 = ORIENTED_EDGE('',*,*,#414401,.T.); +#414631 = ORIENTED_EDGE('',*,*,#414432,.T.); +#414632 = ORIENTED_EDGE('',*,*,#414465,.T.); +#414633 = ORIENTED_EDGE('',*,*,#414496,.T.); +#414634 = ORIENTED_EDGE('',*,*,#414529,.T.); +#414635 = ORIENTED_EDGE('',*,*,#414560,.T.); +#414636 = ORIENTED_EDGE('',*,*,#414593,.T.); +#414637 = PLANE('',#414638); +#414638 = AXIS2_PLACEMENT_3D('',#414639,#414640,#414641); +#414639 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#414640 = DIRECTION('',(-0.,-0.,-1.)); +#414641 = DIRECTION('',(-1.,0.,0.)); +#414642 = MANIFOLD_SOLID_BREP('',#414643); +#414643 = CLOSED_SHELL('',(#414644,#414686,#414717,#414750,#414781, + #414814,#414845,#414878,#414900,#414916)); +#414644 = ADVANCED_FACE('',(#414645),#414681,.T.); +#414645 = FACE_BOUND('',#414646,.T.); +#414646 = EDGE_LOOP('',(#414647,#414657,#414666,#414674)); +#414647 = ORIENTED_EDGE('',*,*,#414648,.T.); +#414648 = EDGE_CURVE('',#414649,#414651,#414653,.T.); +#414649 = VERTEX_POINT('',#414650); +#414650 = CARTESIAN_POINT('',(125.21,-88.915,1.51)); +#414651 = VERTEX_POINT('',#414652); +#414652 = CARTESIAN_POINT('',(125.21,-88.915,1.55)); +#414653 = LINE('',#414654,#414655); +#414654 = CARTESIAN_POINT('',(125.21,-88.915,1.51)); +#414655 = VECTOR('',#414656,1.); +#414656 = DIRECTION('',(0.,0.,1.)); +#414657 = ORIENTED_EDGE('',*,*,#414658,.T.); +#414658 = EDGE_CURVE('',#414651,#414659,#414661,.T.); +#414659 = VERTEX_POINT('',#414660); +#414660 = CARTESIAN_POINT('',(125.345,-88.78,1.55)); +#414661 = CIRCLE('',#414662,0.135001418495); +#414662 = AXIS2_PLACEMENT_3D('',#414663,#414664,#414665); +#414663 = CARTESIAN_POINT('',(125.34500141848,-88.91500141848,1.55)); +#414664 = DIRECTION('',(0.,0.,-1.)); +#414665 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#414666 = ORIENTED_EDGE('',*,*,#414667,.F.); +#414667 = EDGE_CURVE('',#414668,#414659,#414670,.T.); +#414668 = VERTEX_POINT('',#414669); +#414669 = CARTESIAN_POINT('',(125.345,-88.78,1.51)); +#414670 = LINE('',#414671,#414672); +#414671 = CARTESIAN_POINT('',(125.345,-88.78,1.51)); +#414672 = VECTOR('',#414673,1.); +#414673 = DIRECTION('',(0.,0.,1.)); +#414674 = ORIENTED_EDGE('',*,*,#414675,.F.); +#414675 = EDGE_CURVE('',#414649,#414668,#414676,.T.); +#414676 = CIRCLE('',#414677,0.135001418495); +#414677 = AXIS2_PLACEMENT_3D('',#414678,#414679,#414680); +#414678 = CARTESIAN_POINT('',(125.34500141848,-88.91500141848,1.51)); +#414679 = DIRECTION('',(0.,0.,-1.)); +#414680 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#414681 = CYLINDRICAL_SURFACE('',#414682,0.135001418495); +#414682 = AXIS2_PLACEMENT_3D('',#414683,#414684,#414685); +#414683 = CARTESIAN_POINT('',(125.34500141848,-88.91500141848,1.51)); +#414684 = DIRECTION('',(0.,0.,-1.)); +#414685 = DIRECTION('',(-0.999999999945,1.050720651629E-05,0.)); +#414686 = ADVANCED_FACE('',(#414687),#414712,.T.); +#414687 = FACE_BOUND('',#414688,.T.); +#414688 = EDGE_LOOP('',(#414689,#414690,#414698,#414706)); +#414689 = ORIENTED_EDGE('',*,*,#414667,.T.); +#414690 = ORIENTED_EDGE('',*,*,#414691,.T.); +#414691 = EDGE_CURVE('',#414659,#414692,#414694,.T.); +#414692 = VERTEX_POINT('',#414693); +#414693 = CARTESIAN_POINT('',(125.615,-88.78,1.55)); +#414694 = LINE('',#414695,#414696); +#414695 = CARTESIAN_POINT('',(125.345,-88.78,1.55)); +#414696 = VECTOR('',#414697,1.); +#414697 = DIRECTION('',(1.,0.,0.)); +#414698 = ORIENTED_EDGE('',*,*,#414699,.F.); +#414699 = EDGE_CURVE('',#414700,#414692,#414702,.T.); +#414700 = VERTEX_POINT('',#414701); +#414701 = CARTESIAN_POINT('',(125.615,-88.78,1.51)); +#414702 = LINE('',#414703,#414704); +#414703 = CARTESIAN_POINT('',(125.615,-88.78,1.51)); +#414704 = VECTOR('',#414705,1.); +#414705 = DIRECTION('',(0.,0.,1.)); +#414706 = ORIENTED_EDGE('',*,*,#414707,.F.); +#414707 = EDGE_CURVE('',#414668,#414700,#414708,.T.); +#414708 = LINE('',#414709,#414710); +#414709 = CARTESIAN_POINT('',(125.345,-88.78,1.51)); +#414710 = VECTOR('',#414711,1.); +#414711 = DIRECTION('',(1.,0.,0.)); +#414712 = PLANE('',#414713); +#414713 = AXIS2_PLACEMENT_3D('',#414714,#414715,#414716); +#414714 = CARTESIAN_POINT('',(125.345,-88.78,1.51)); +#414715 = DIRECTION('',(0.,1.,0.)); +#414716 = DIRECTION('',(1.,0.,0.)); +#414717 = ADVANCED_FACE('',(#414718),#414745,.T.); +#414718 = FACE_BOUND('',#414719,.T.); +#414719 = EDGE_LOOP('',(#414720,#414721,#414730,#414738)); +#414720 = ORIENTED_EDGE('',*,*,#414699,.T.); +#414721 = ORIENTED_EDGE('',*,*,#414722,.T.); +#414722 = EDGE_CURVE('',#414692,#414723,#414725,.T.); +#414723 = VERTEX_POINT('',#414724); +#414724 = CARTESIAN_POINT('',(125.75,-88.915,1.55)); +#414725 = CIRCLE('',#414726,0.135001418495); +#414726 = AXIS2_PLACEMENT_3D('',#414727,#414728,#414729); +#414727 = CARTESIAN_POINT('',(125.61499858151,-88.91500141848,1.55)); +#414728 = DIRECTION('',(0.,0.,-1.)); +#414729 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#414730 = ORIENTED_EDGE('',*,*,#414731,.F.); +#414731 = EDGE_CURVE('',#414732,#414723,#414734,.T.); +#414732 = VERTEX_POINT('',#414733); +#414733 = CARTESIAN_POINT('',(125.75,-88.915,1.51)); +#414734 = LINE('',#414735,#414736); +#414735 = CARTESIAN_POINT('',(125.75,-88.915,1.51)); +#414736 = VECTOR('',#414737,1.); +#414737 = DIRECTION('',(0.,0.,1.)); +#414738 = ORIENTED_EDGE('',*,*,#414739,.F.); +#414739 = EDGE_CURVE('',#414700,#414732,#414740,.T.); +#414740 = CIRCLE('',#414741,0.135001418495); +#414741 = AXIS2_PLACEMENT_3D('',#414742,#414743,#414744); +#414742 = CARTESIAN_POINT('',(125.61499858151,-88.91500141848,1.51)); +#414743 = DIRECTION('',(0.,0.,-1.)); +#414744 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#414745 = CYLINDRICAL_SURFACE('',#414746,0.135001418495); +#414746 = AXIS2_PLACEMENT_3D('',#414747,#414748,#414749); +#414747 = CARTESIAN_POINT('',(125.61499858151,-88.91500141848,1.51)); +#414748 = DIRECTION('',(0.,0.,-1.)); +#414749 = DIRECTION('',(1.050720651629E-05,0.999999999945,0.)); +#414750 = ADVANCED_FACE('',(#414751),#414776,.T.); +#414751 = FACE_BOUND('',#414752,.T.); +#414752 = EDGE_LOOP('',(#414753,#414754,#414762,#414770)); +#414753 = ORIENTED_EDGE('',*,*,#414731,.T.); +#414754 = ORIENTED_EDGE('',*,*,#414755,.T.); +#414755 = EDGE_CURVE('',#414723,#414756,#414758,.T.); +#414756 = VERTEX_POINT('',#414757); +#414757 = CARTESIAN_POINT('',(125.75,-89.285,1.55)); +#414758 = LINE('',#414759,#414760); +#414759 = CARTESIAN_POINT('',(125.75,-88.915,1.55)); +#414760 = VECTOR('',#414761,1.); +#414761 = DIRECTION('',(0.,-1.,0.)); +#414762 = ORIENTED_EDGE('',*,*,#414763,.F.); +#414763 = EDGE_CURVE('',#414764,#414756,#414766,.T.); +#414764 = VERTEX_POINT('',#414765); +#414765 = CARTESIAN_POINT('',(125.75,-89.285,1.51)); +#414766 = LINE('',#414767,#414768); +#414767 = CARTESIAN_POINT('',(125.75,-89.285,1.51)); +#414768 = VECTOR('',#414769,1.); +#414769 = DIRECTION('',(0.,0.,1.)); +#414770 = ORIENTED_EDGE('',*,*,#414771,.F.); +#414771 = EDGE_CURVE('',#414732,#414764,#414772,.T.); +#414772 = LINE('',#414773,#414774); +#414773 = CARTESIAN_POINT('',(125.75,-88.915,1.51)); +#414774 = VECTOR('',#414775,1.); +#414775 = DIRECTION('',(0.,-1.,0.)); +#414776 = PLANE('',#414777); +#414777 = AXIS2_PLACEMENT_3D('',#414778,#414779,#414780); +#414778 = CARTESIAN_POINT('',(125.75,-88.915,1.51)); +#414779 = DIRECTION('',(1.,0.,-0.)); +#414780 = DIRECTION('',(0.,-1.,0.)); +#414781 = ADVANCED_FACE('',(#414782),#414809,.T.); +#414782 = FACE_BOUND('',#414783,.T.); +#414783 = EDGE_LOOP('',(#414784,#414785,#414794,#414802)); +#414784 = ORIENTED_EDGE('',*,*,#414763,.T.); +#414785 = ORIENTED_EDGE('',*,*,#414786,.T.); +#414786 = EDGE_CURVE('',#414756,#414787,#414789,.T.); +#414787 = VERTEX_POINT('',#414788); +#414788 = CARTESIAN_POINT('',(125.615,-89.42,1.55)); +#414789 = CIRCLE('',#414790,0.135001418495); +#414790 = AXIS2_PLACEMENT_3D('',#414791,#414792,#414793); +#414791 = CARTESIAN_POINT('',(125.61499858151,-89.28499858151,1.55)); +#414792 = DIRECTION('',(0.,0.,-1.)); +#414793 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#414794 = ORIENTED_EDGE('',*,*,#414795,.F.); +#414795 = EDGE_CURVE('',#414796,#414787,#414798,.T.); +#414796 = VERTEX_POINT('',#414797); +#414797 = CARTESIAN_POINT('',(125.615,-89.42,1.51)); +#414798 = LINE('',#414799,#414800); +#414799 = CARTESIAN_POINT('',(125.615,-89.42,1.51)); +#414800 = VECTOR('',#414801,1.); +#414801 = DIRECTION('',(0.,0.,1.)); +#414802 = ORIENTED_EDGE('',*,*,#414803,.F.); +#414803 = EDGE_CURVE('',#414764,#414796,#414804,.T.); +#414804 = CIRCLE('',#414805,0.135001418495); +#414805 = AXIS2_PLACEMENT_3D('',#414806,#414807,#414808); +#414806 = CARTESIAN_POINT('',(125.61499858151,-89.28499858151,1.51)); +#414807 = DIRECTION('',(0.,0.,-1.)); +#414808 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#414809 = CYLINDRICAL_SURFACE('',#414810,0.135001418495); +#414810 = AXIS2_PLACEMENT_3D('',#414811,#414812,#414813); +#414811 = CARTESIAN_POINT('',(125.61499858151,-89.28499858151,1.51)); +#414812 = DIRECTION('',(0.,0.,-1.)); +#414813 = DIRECTION('',(0.999999999945,-1.050720651629E-05,0.)); +#414814 = ADVANCED_FACE('',(#414815),#414840,.T.); +#414815 = FACE_BOUND('',#414816,.T.); +#414816 = EDGE_LOOP('',(#414817,#414818,#414826,#414834)); +#414817 = ORIENTED_EDGE('',*,*,#414795,.T.); +#414818 = ORIENTED_EDGE('',*,*,#414819,.T.); +#414819 = EDGE_CURVE('',#414787,#414820,#414822,.T.); +#414820 = VERTEX_POINT('',#414821); +#414821 = CARTESIAN_POINT('',(125.345,-89.42,1.55)); +#414822 = LINE('',#414823,#414824); +#414823 = CARTESIAN_POINT('',(125.615,-89.42,1.55)); +#414824 = VECTOR('',#414825,1.); +#414825 = DIRECTION('',(-1.,0.,0.)); +#414826 = ORIENTED_EDGE('',*,*,#414827,.F.); +#414827 = EDGE_CURVE('',#414828,#414820,#414830,.T.); +#414828 = VERTEX_POINT('',#414829); +#414829 = CARTESIAN_POINT('',(125.345,-89.42,1.51)); +#414830 = LINE('',#414831,#414832); +#414831 = CARTESIAN_POINT('',(125.345,-89.42,1.51)); +#414832 = VECTOR('',#414833,1.); +#414833 = DIRECTION('',(0.,0.,1.)); +#414834 = ORIENTED_EDGE('',*,*,#414835,.F.); +#414835 = EDGE_CURVE('',#414796,#414828,#414836,.T.); +#414836 = LINE('',#414837,#414838); +#414837 = CARTESIAN_POINT('',(125.615,-89.42,1.51)); +#414838 = VECTOR('',#414839,1.); +#414839 = DIRECTION('',(-1.,0.,0.)); +#414840 = PLANE('',#414841); +#414841 = AXIS2_PLACEMENT_3D('',#414842,#414843,#414844); +#414842 = CARTESIAN_POINT('',(125.615,-89.42,1.51)); +#414843 = DIRECTION('',(0.,-1.,0.)); +#414844 = DIRECTION('',(-1.,0.,0.)); +#414845 = ADVANCED_FACE('',(#414846),#414873,.T.); +#414846 = FACE_BOUND('',#414847,.T.); +#414847 = EDGE_LOOP('',(#414848,#414849,#414858,#414866)); +#414848 = ORIENTED_EDGE('',*,*,#414827,.T.); +#414849 = ORIENTED_EDGE('',*,*,#414850,.T.); +#414850 = EDGE_CURVE('',#414820,#414851,#414853,.T.); +#414851 = VERTEX_POINT('',#414852); +#414852 = CARTESIAN_POINT('',(125.21,-89.285,1.55)); +#414853 = CIRCLE('',#414854,0.135001418495); +#414854 = AXIS2_PLACEMENT_3D('',#414855,#414856,#414857); +#414855 = CARTESIAN_POINT('',(125.34500141848,-89.28499858151,1.55)); +#414856 = DIRECTION('',(0.,0.,-1.)); +#414857 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#414858 = ORIENTED_EDGE('',*,*,#414859,.F.); +#414859 = EDGE_CURVE('',#414860,#414851,#414862,.T.); +#414860 = VERTEX_POINT('',#414861); +#414861 = CARTESIAN_POINT('',(125.21,-89.285,1.51)); +#414862 = LINE('',#414863,#414864); +#414863 = CARTESIAN_POINT('',(125.21,-89.285,1.51)); +#414864 = VECTOR('',#414865,1.); +#414865 = DIRECTION('',(0.,0.,1.)); +#414866 = ORIENTED_EDGE('',*,*,#414867,.F.); +#414867 = EDGE_CURVE('',#414828,#414860,#414868,.T.); +#414868 = CIRCLE('',#414869,0.135001418495); +#414869 = AXIS2_PLACEMENT_3D('',#414870,#414871,#414872); +#414870 = CARTESIAN_POINT('',(125.34500141848,-89.28499858151,1.51)); +#414871 = DIRECTION('',(0.,0.,-1.)); +#414872 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#414873 = CYLINDRICAL_SURFACE('',#414874,0.135001418495); +#414874 = AXIS2_PLACEMENT_3D('',#414875,#414876,#414877); +#414875 = CARTESIAN_POINT('',(125.34500141848,-89.28499858151,1.51)); +#414876 = DIRECTION('',(0.,0.,-1.)); +#414877 = DIRECTION('',(-1.050720641103E-05,-0.999999999945,-0.)); +#414878 = ADVANCED_FACE('',(#414879),#414895,.T.); +#414879 = FACE_BOUND('',#414880,.T.); +#414880 = EDGE_LOOP('',(#414881,#414882,#414888,#414889)); +#414881 = ORIENTED_EDGE('',*,*,#414859,.T.); +#414882 = ORIENTED_EDGE('',*,*,#414883,.T.); +#414883 = EDGE_CURVE('',#414851,#414651,#414884,.T.); +#414884 = LINE('',#414885,#414886); +#414885 = CARTESIAN_POINT('',(125.21,-89.285,1.55)); +#414886 = VECTOR('',#414887,1.); +#414887 = DIRECTION('',(0.,1.,0.)); +#414888 = ORIENTED_EDGE('',*,*,#414648,.F.); +#414889 = ORIENTED_EDGE('',*,*,#414890,.F.); +#414890 = EDGE_CURVE('',#414860,#414649,#414891,.T.); +#414891 = LINE('',#414892,#414893); +#414892 = CARTESIAN_POINT('',(125.21,-89.285,1.51)); +#414893 = VECTOR('',#414894,1.); +#414894 = DIRECTION('',(0.,1.,0.)); +#414895 = PLANE('',#414896); +#414896 = AXIS2_PLACEMENT_3D('',#414897,#414898,#414899); +#414897 = CARTESIAN_POINT('',(125.21,-89.285,1.51)); +#414898 = DIRECTION('',(-1.,0.,0.)); +#414899 = DIRECTION('',(0.,1.,0.)); +#414900 = ADVANCED_FACE('',(#414901),#414911,.F.); +#414901 = FACE_BOUND('',#414902,.T.); +#414902 = EDGE_LOOP('',(#414903,#414904,#414905,#414906,#414907,#414908, + #414909,#414910)); +#414903 = ORIENTED_EDGE('',*,*,#414675,.T.); +#414904 = ORIENTED_EDGE('',*,*,#414707,.T.); +#414905 = ORIENTED_EDGE('',*,*,#414739,.T.); +#414906 = ORIENTED_EDGE('',*,*,#414771,.T.); +#414907 = ORIENTED_EDGE('',*,*,#414803,.T.); +#414908 = ORIENTED_EDGE('',*,*,#414835,.T.); +#414909 = ORIENTED_EDGE('',*,*,#414867,.T.); +#414910 = ORIENTED_EDGE('',*,*,#414890,.T.); +#414911 = PLANE('',#414912); +#414912 = AXIS2_PLACEMENT_3D('',#414913,#414914,#414915); +#414913 = CARTESIAN_POINT('',(0.,0.,1.51)); +#414914 = DIRECTION('',(0.,0.,1.)); +#414915 = DIRECTION('',(1.,0.,-0.)); +#414916 = ADVANCED_FACE('',(#414917),#414927,.T.); +#414917 = FACE_BOUND('',#414918,.F.); +#414918 = EDGE_LOOP('',(#414919,#414920,#414921,#414922,#414923,#414924, + #414925,#414926)); +#414919 = ORIENTED_EDGE('',*,*,#414658,.T.); +#414920 = ORIENTED_EDGE('',*,*,#414691,.T.); +#414921 = ORIENTED_EDGE('',*,*,#414722,.T.); +#414922 = ORIENTED_EDGE('',*,*,#414755,.T.); +#414923 = ORIENTED_EDGE('',*,*,#414786,.T.); +#414924 = ORIENTED_EDGE('',*,*,#414819,.T.); +#414925 = ORIENTED_EDGE('',*,*,#414850,.T.); +#414926 = ORIENTED_EDGE('',*,*,#414883,.T.); +#414927 = PLANE('',#414928); +#414928 = AXIS2_PLACEMENT_3D('',#414929,#414930,#414931); +#414929 = CARTESIAN_POINT('',(0.,0.,1.55)); +#414930 = DIRECTION('',(0.,0.,1.)); +#414931 = DIRECTION('',(1.,0.,-0.)); +#414932 = MANIFOLD_SOLID_BREP('',#414933); +#414933 = CLOSED_SHELL('',(#414934,#414976,#415007,#415040,#415071, + #415104,#415135,#415168,#415190,#415206)); +#414934 = ADVANCED_FACE('',(#414935),#414971,.T.); +#414935 = FACE_BOUND('',#414936,.F.); +#414936 = EDGE_LOOP('',(#414937,#414947,#414956,#414964)); +#414937 = ORIENTED_EDGE('',*,*,#414938,.T.); +#414938 = EDGE_CURVE('',#414939,#414941,#414943,.T.); +#414939 = VERTEX_POINT('',#414940); +#414940 = CARTESIAN_POINT('',(137.5,-116.525,0.)); +#414941 = VERTEX_POINT('',#414942); +#414942 = CARTESIAN_POINT('',(137.5,-116.525,-4.E-02)); +#414943 = LINE('',#414944,#414945); +#414944 = CARTESIAN_POINT('',(137.5,-116.525,0.)); +#414945 = VECTOR('',#414946,1.); +#414946 = DIRECTION('',(0.,0.,-1.)); +#414947 = ORIENTED_EDGE('',*,*,#414948,.T.); +#414948 = EDGE_CURVE('',#414941,#414949,#414951,.T.); +#414949 = VERTEX_POINT('',#414950); +#414950 = CARTESIAN_POINT('',(137.75,-116.275,-4.E-02)); +#414951 = CIRCLE('',#414952,0.249998959685); +#414952 = AXIS2_PLACEMENT_3D('',#414953,#414954,#414955); +#414953 = CARTESIAN_POINT('',(137.74999895968,-116.5249989596,-4.E-02)); +#414954 = DIRECTION('',(0.,0.,-1.)); +#414955 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#414956 = ORIENTED_EDGE('',*,*,#414957,.F.); +#414957 = EDGE_CURVE('',#414958,#414949,#414960,.T.); +#414958 = VERTEX_POINT('',#414959); +#414959 = CARTESIAN_POINT('',(137.75,-116.275,0.)); +#414960 = LINE('',#414961,#414962); +#414961 = CARTESIAN_POINT('',(137.75,-116.275,0.)); +#414962 = VECTOR('',#414963,1.); +#414963 = DIRECTION('',(0.,0.,-1.)); +#414964 = ORIENTED_EDGE('',*,*,#414965,.F.); +#414965 = EDGE_CURVE('',#414939,#414958,#414966,.T.); +#414966 = CIRCLE('',#414967,0.249998959685); +#414967 = AXIS2_PLACEMENT_3D('',#414968,#414969,#414970); +#414968 = CARTESIAN_POINT('',(137.74999895968,-116.5249989596,0.)); +#414969 = DIRECTION('',(0.,0.,-1.)); +#414970 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#414971 = CYLINDRICAL_SURFACE('',#414972,0.249998959685); +#414972 = AXIS2_PLACEMENT_3D('',#414973,#414974,#414975); +#414973 = CARTESIAN_POINT('',(137.74999895968,-116.5249989596,0.)); +#414974 = DIRECTION('',(-0.,-0.,1.)); +#414975 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#414976 = ADVANCED_FACE('',(#414977),#415002,.F.); +#414977 = FACE_BOUND('',#414978,.F.); +#414978 = EDGE_LOOP('',(#414979,#414980,#414988,#414996)); +#414979 = ORIENTED_EDGE('',*,*,#414957,.T.); +#414980 = ORIENTED_EDGE('',*,*,#414981,.T.); +#414981 = EDGE_CURVE('',#414949,#414982,#414984,.T.); +#414982 = VERTEX_POINT('',#414983); +#414983 = CARTESIAN_POINT('',(138.25,-116.275,-4.E-02)); +#414984 = LINE('',#414985,#414986); +#414985 = CARTESIAN_POINT('',(137.75,-116.275,-4.E-02)); +#414986 = VECTOR('',#414987,1.); +#414987 = DIRECTION('',(1.,0.,0.)); +#414988 = ORIENTED_EDGE('',*,*,#414989,.F.); +#414989 = EDGE_CURVE('',#414990,#414982,#414992,.T.); +#414990 = VERTEX_POINT('',#414991); +#414991 = CARTESIAN_POINT('',(138.25,-116.275,0.)); +#414992 = LINE('',#414993,#414994); +#414993 = CARTESIAN_POINT('',(138.25,-116.275,0.)); +#414994 = VECTOR('',#414995,1.); +#414995 = DIRECTION('',(0.,0.,-1.)); +#414996 = ORIENTED_EDGE('',*,*,#414997,.F.); +#414997 = EDGE_CURVE('',#414958,#414990,#414998,.T.); +#414998 = LINE('',#414999,#415000); +#414999 = CARTESIAN_POINT('',(137.75,-116.275,0.)); +#415000 = VECTOR('',#415001,1.); +#415001 = DIRECTION('',(1.,0.,0.)); +#415002 = PLANE('',#415003); +#415003 = AXIS2_PLACEMENT_3D('',#415004,#415005,#415006); +#415004 = CARTESIAN_POINT('',(137.75,-116.275,0.)); +#415005 = DIRECTION('',(0.,-1.,0.)); +#415006 = DIRECTION('',(1.,0.,0.)); +#415007 = ADVANCED_FACE('',(#415008),#415035,.T.); +#415008 = FACE_BOUND('',#415009,.F.); +#415009 = EDGE_LOOP('',(#415010,#415011,#415020,#415028)); +#415010 = ORIENTED_EDGE('',*,*,#414989,.T.); +#415011 = ORIENTED_EDGE('',*,*,#415012,.T.); +#415012 = EDGE_CURVE('',#414982,#415013,#415015,.T.); +#415013 = VERTEX_POINT('',#415014); +#415014 = CARTESIAN_POINT('',(138.5,-116.525,-4.E-02)); +#415015 = CIRCLE('',#415016,0.249998959685); +#415016 = AXIS2_PLACEMENT_3D('',#415017,#415018,#415019); +#415017 = CARTESIAN_POINT('',(138.25000104031,-116.5249989596,-4.E-02)); +#415018 = DIRECTION('',(0.,0.,-1.)); +#415019 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#415020 = ORIENTED_EDGE('',*,*,#415021,.F.); +#415021 = EDGE_CURVE('',#415022,#415013,#415024,.T.); +#415022 = VERTEX_POINT('',#415023); +#415023 = CARTESIAN_POINT('',(138.5,-116.525,0.)); +#415024 = LINE('',#415025,#415026); +#415025 = CARTESIAN_POINT('',(138.5,-116.525,0.)); +#415026 = VECTOR('',#415027,1.); +#415027 = DIRECTION('',(0.,0.,-1.)); +#415028 = ORIENTED_EDGE('',*,*,#415029,.F.); +#415029 = EDGE_CURVE('',#414990,#415022,#415030,.T.); +#415030 = CIRCLE('',#415031,0.249998959685); +#415031 = AXIS2_PLACEMENT_3D('',#415032,#415033,#415034); +#415032 = CARTESIAN_POINT('',(138.25000104031,-116.5249989596,0.)); +#415033 = DIRECTION('',(0.,0.,-1.)); +#415034 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#415035 = CYLINDRICAL_SURFACE('',#415036,0.249998959685); +#415036 = AXIS2_PLACEMENT_3D('',#415037,#415038,#415039); +#415037 = CARTESIAN_POINT('',(138.25000104031,-116.5249989596,0.)); +#415038 = DIRECTION('',(-0.,-0.,1.)); +#415039 = DIRECTION('',(-4.161285837066E-06,0.999999999991,0.)); +#415040 = ADVANCED_FACE('',(#415041),#415066,.F.); +#415041 = FACE_BOUND('',#415042,.F.); +#415042 = EDGE_LOOP('',(#415043,#415044,#415052,#415060)); +#415043 = ORIENTED_EDGE('',*,*,#415021,.T.); +#415044 = ORIENTED_EDGE('',*,*,#415045,.T.); +#415045 = EDGE_CURVE('',#415013,#415046,#415048,.T.); +#415046 = VERTEX_POINT('',#415047); +#415047 = CARTESIAN_POINT('',(138.5,-117.475,-4.E-02)); +#415048 = LINE('',#415049,#415050); +#415049 = CARTESIAN_POINT('',(138.5,-116.525,-4.E-02)); +#415050 = VECTOR('',#415051,1.); +#415051 = DIRECTION('',(0.,-1.,0.)); +#415052 = ORIENTED_EDGE('',*,*,#415053,.F.); +#415053 = EDGE_CURVE('',#415054,#415046,#415056,.T.); +#415054 = VERTEX_POINT('',#415055); +#415055 = CARTESIAN_POINT('',(138.5,-117.475,0.)); +#415056 = LINE('',#415057,#415058); +#415057 = CARTESIAN_POINT('',(138.5,-117.475,0.)); +#415058 = VECTOR('',#415059,1.); +#415059 = DIRECTION('',(0.,0.,-1.)); +#415060 = ORIENTED_EDGE('',*,*,#415061,.F.); +#415061 = EDGE_CURVE('',#415022,#415054,#415062,.T.); +#415062 = LINE('',#415063,#415064); +#415063 = CARTESIAN_POINT('',(138.5,-116.525,0.)); +#415064 = VECTOR('',#415065,1.); +#415065 = DIRECTION('',(0.,-1.,0.)); +#415066 = PLANE('',#415067); +#415067 = AXIS2_PLACEMENT_3D('',#415068,#415069,#415070); +#415068 = CARTESIAN_POINT('',(138.5,-116.525,0.)); +#415069 = DIRECTION('',(-1.,-0.,-0.)); +#415070 = DIRECTION('',(0.,-1.,0.)); +#415071 = ADVANCED_FACE('',(#415072),#415099,.T.); +#415072 = FACE_BOUND('',#415073,.F.); +#415073 = EDGE_LOOP('',(#415074,#415075,#415084,#415092)); +#415074 = ORIENTED_EDGE('',*,*,#415053,.T.); +#415075 = ORIENTED_EDGE('',*,*,#415076,.T.); +#415076 = EDGE_CURVE('',#415046,#415077,#415079,.T.); +#415077 = VERTEX_POINT('',#415078); +#415078 = CARTESIAN_POINT('',(138.25,-117.725,-4.E-02)); +#415079 = CIRCLE('',#415080,0.249998959685); +#415080 = AXIS2_PLACEMENT_3D('',#415081,#415082,#415083); +#415081 = CARTESIAN_POINT('',(138.25000104031,-117.4750010403,-4.E-02)); +#415082 = DIRECTION('',(0.,0.,-1.)); +#415083 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#415084 = ORIENTED_EDGE('',*,*,#415085,.F.); +#415085 = EDGE_CURVE('',#415086,#415077,#415088,.T.); +#415086 = VERTEX_POINT('',#415087); +#415087 = CARTESIAN_POINT('',(138.25,-117.725,0.)); +#415088 = LINE('',#415089,#415090); +#415089 = CARTESIAN_POINT('',(138.25,-117.725,0.)); +#415090 = VECTOR('',#415091,1.); +#415091 = DIRECTION('',(0.,0.,-1.)); +#415092 = ORIENTED_EDGE('',*,*,#415093,.F.); +#415093 = EDGE_CURVE('',#415054,#415086,#415094,.T.); +#415094 = CIRCLE('',#415095,0.249998959685); +#415095 = AXIS2_PLACEMENT_3D('',#415096,#415097,#415098); +#415096 = CARTESIAN_POINT('',(138.25000104031,-117.4750010403,0.)); +#415097 = DIRECTION('',(0.,0.,-1.)); +#415098 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#415099 = CYLINDRICAL_SURFACE('',#415100,0.249998959685); +#415100 = AXIS2_PLACEMENT_3D('',#415101,#415102,#415103); +#415101 = CARTESIAN_POINT('',(138.25000104031,-117.4750010403,0.)); +#415102 = DIRECTION('',(-0.,-0.,1.)); +#415103 = DIRECTION('',(0.999999999991,4.161285780223E-06,0.)); +#415104 = ADVANCED_FACE('',(#415105),#415130,.F.); +#415105 = FACE_BOUND('',#415106,.F.); +#415106 = EDGE_LOOP('',(#415107,#415108,#415116,#415124)); +#415107 = ORIENTED_EDGE('',*,*,#415085,.T.); +#415108 = ORIENTED_EDGE('',*,*,#415109,.T.); +#415109 = EDGE_CURVE('',#415077,#415110,#415112,.T.); +#415110 = VERTEX_POINT('',#415111); +#415111 = CARTESIAN_POINT('',(137.75,-117.725,-4.E-02)); +#415112 = LINE('',#415113,#415114); +#415113 = CARTESIAN_POINT('',(138.25,-117.725,-4.E-02)); +#415114 = VECTOR('',#415115,1.); +#415115 = DIRECTION('',(-1.,0.,0.)); +#415116 = ORIENTED_EDGE('',*,*,#415117,.F.); +#415117 = EDGE_CURVE('',#415118,#415110,#415120,.T.); +#415118 = VERTEX_POINT('',#415119); +#415119 = CARTESIAN_POINT('',(137.75,-117.725,0.)); +#415120 = LINE('',#415121,#415122); +#415121 = CARTESIAN_POINT('',(137.75,-117.725,0.)); +#415122 = VECTOR('',#415123,1.); +#415123 = DIRECTION('',(0.,0.,-1.)); +#415124 = ORIENTED_EDGE('',*,*,#415125,.F.); +#415125 = EDGE_CURVE('',#415086,#415118,#415126,.T.); +#415126 = LINE('',#415127,#415128); +#415127 = CARTESIAN_POINT('',(138.25,-117.725,0.)); +#415128 = VECTOR('',#415129,1.); +#415129 = DIRECTION('',(-1.,0.,0.)); +#415130 = PLANE('',#415131); +#415131 = AXIS2_PLACEMENT_3D('',#415132,#415133,#415134); +#415132 = CARTESIAN_POINT('',(138.25,-117.725,0.)); +#415133 = DIRECTION('',(0.,1.,0.)); +#415134 = DIRECTION('',(-1.,0.,0.)); +#415135 = ADVANCED_FACE('',(#415136),#415163,.T.); +#415136 = FACE_BOUND('',#415137,.F.); +#415137 = EDGE_LOOP('',(#415138,#415139,#415148,#415156)); +#415138 = ORIENTED_EDGE('',*,*,#415117,.T.); +#415139 = ORIENTED_EDGE('',*,*,#415140,.T.); +#415140 = EDGE_CURVE('',#415110,#415141,#415143,.T.); +#415141 = VERTEX_POINT('',#415142); +#415142 = CARTESIAN_POINT('',(137.5,-117.475,-4.E-02)); +#415143 = CIRCLE('',#415144,0.249998959685); +#415144 = AXIS2_PLACEMENT_3D('',#415145,#415146,#415147); +#415145 = CARTESIAN_POINT('',(137.74999895968,-117.4750010403,-4.E-02)); +#415146 = DIRECTION('',(0.,0.,-1.)); +#415147 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415148 = ORIENTED_EDGE('',*,*,#415149,.F.); +#415149 = EDGE_CURVE('',#415150,#415141,#415152,.T.); +#415150 = VERTEX_POINT('',#415151); +#415151 = CARTESIAN_POINT('',(137.5,-117.475,0.)); +#415152 = LINE('',#415153,#415154); +#415153 = CARTESIAN_POINT('',(137.5,-117.475,0.)); +#415154 = VECTOR('',#415155,1.); +#415155 = DIRECTION('',(0.,0.,-1.)); +#415156 = ORIENTED_EDGE('',*,*,#415157,.F.); +#415157 = EDGE_CURVE('',#415118,#415150,#415158,.T.); +#415158 = CIRCLE('',#415159,0.249998959685); +#415159 = AXIS2_PLACEMENT_3D('',#415160,#415161,#415162); +#415160 = CARTESIAN_POINT('',(137.74999895968,-117.4750010403,0.)); +#415161 = DIRECTION('',(0.,0.,-1.)); +#415162 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415163 = CYLINDRICAL_SURFACE('',#415164,0.249998959685); +#415164 = AXIS2_PLACEMENT_3D('',#415165,#415166,#415167); +#415165 = CARTESIAN_POINT('',(137.74999895968,-117.4750010403,0.)); +#415166 = DIRECTION('',(-0.,-0.,1.)); +#415167 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415168 = ADVANCED_FACE('',(#415169),#415185,.F.); +#415169 = FACE_BOUND('',#415170,.F.); +#415170 = EDGE_LOOP('',(#415171,#415172,#415178,#415179)); +#415171 = ORIENTED_EDGE('',*,*,#415149,.T.); +#415172 = ORIENTED_EDGE('',*,*,#415173,.T.); +#415173 = EDGE_CURVE('',#415141,#414941,#415174,.T.); +#415174 = LINE('',#415175,#415176); +#415175 = CARTESIAN_POINT('',(137.5,-117.475,-4.E-02)); +#415176 = VECTOR('',#415177,1.); +#415177 = DIRECTION('',(0.,1.,0.)); +#415178 = ORIENTED_EDGE('',*,*,#414938,.F.); +#415179 = ORIENTED_EDGE('',*,*,#415180,.F.); +#415180 = EDGE_CURVE('',#415150,#414939,#415181,.T.); +#415181 = LINE('',#415182,#415183); +#415182 = CARTESIAN_POINT('',(137.5,-117.475,0.)); +#415183 = VECTOR('',#415184,1.); +#415184 = DIRECTION('',(0.,1.,0.)); +#415185 = PLANE('',#415186); +#415186 = AXIS2_PLACEMENT_3D('',#415187,#415188,#415189); +#415187 = CARTESIAN_POINT('',(137.5,-117.475,0.)); +#415188 = DIRECTION('',(1.,-0.,0.)); +#415189 = DIRECTION('',(0.,1.,0.)); +#415190 = ADVANCED_FACE('',(#415191),#415201,.F.); +#415191 = FACE_BOUND('',#415192,.F.); +#415192 = EDGE_LOOP('',(#415193,#415194,#415195,#415196,#415197,#415198, + #415199,#415200)); +#415193 = ORIENTED_EDGE('',*,*,#414965,.T.); +#415194 = ORIENTED_EDGE('',*,*,#414997,.T.); +#415195 = ORIENTED_EDGE('',*,*,#415029,.T.); +#415196 = ORIENTED_EDGE('',*,*,#415061,.T.); +#415197 = ORIENTED_EDGE('',*,*,#415093,.T.); +#415198 = ORIENTED_EDGE('',*,*,#415125,.T.); +#415199 = ORIENTED_EDGE('',*,*,#415157,.T.); +#415200 = ORIENTED_EDGE('',*,*,#415180,.T.); +#415201 = PLANE('',#415202); +#415202 = AXIS2_PLACEMENT_3D('',#415203,#415204,#415205); +#415203 = CARTESIAN_POINT('',(0.,0.,0.)); +#415204 = DIRECTION('',(-0.,-0.,-1.)); +#415205 = DIRECTION('',(-1.,0.,0.)); +#415206 = ADVANCED_FACE('',(#415207),#415217,.T.); +#415207 = FACE_BOUND('',#415208,.T.); +#415208 = EDGE_LOOP('',(#415209,#415210,#415211,#415212,#415213,#415214, + #415215,#415216)); +#415209 = ORIENTED_EDGE('',*,*,#414948,.T.); +#415210 = ORIENTED_EDGE('',*,*,#414981,.T.); +#415211 = ORIENTED_EDGE('',*,*,#415012,.T.); +#415212 = ORIENTED_EDGE('',*,*,#415045,.T.); +#415213 = ORIENTED_EDGE('',*,*,#415076,.T.); +#415214 = ORIENTED_EDGE('',*,*,#415109,.T.); +#415215 = ORIENTED_EDGE('',*,*,#415140,.T.); +#415216 = ORIENTED_EDGE('',*,*,#415173,.T.); +#415217 = PLANE('',#415218); +#415218 = AXIS2_PLACEMENT_3D('',#415219,#415220,#415221); +#415219 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#415220 = DIRECTION('',(-0.,-0.,-1.)); +#415221 = DIRECTION('',(-1.,0.,0.)); +#415222 = MANIFOLD_SOLID_BREP('',#415223); +#415223 = CLOSED_SHELL('',(#415224,#415266,#415297,#415330,#415361, + #415394,#415425,#415458,#415480,#415496)); +#415224 = ADVANCED_FACE('',(#415225),#415261,.T.); +#415225 = FACE_BOUND('',#415226,.F.); +#415226 = EDGE_LOOP('',(#415227,#415237,#415246,#415254)); +#415227 = ORIENTED_EDGE('',*,*,#415228,.T.); +#415228 = EDGE_CURVE('',#415229,#415231,#415233,.T.); +#415229 = VERTEX_POINT('',#415230); +#415230 = CARTESIAN_POINT('',(147.8875,-115.9,0.)); +#415231 = VERTEX_POINT('',#415232); +#415232 = CARTESIAN_POINT('',(147.8875,-115.9,-4.E-02)); +#415233 = LINE('',#415234,#415235); +#415234 = CARTESIAN_POINT('',(147.8875,-115.9,0.)); +#415235 = VECTOR('',#415236,1.); +#415236 = DIRECTION('',(0.,0.,-1.)); +#415237 = ORIENTED_EDGE('',*,*,#415238,.T.); +#415238 = EDGE_CURVE('',#415231,#415239,#415241,.T.); +#415239 = VERTEX_POINT('',#415240); +#415240 = CARTESIAN_POINT('',(148.0375,-115.75,-4.E-02)); +#415241 = CIRCLE('',#415242,0.150000058649); +#415242 = AXIS2_PLACEMENT_3D('',#415243,#415244,#415245); +#415243 = CARTESIAN_POINT('',(148.03750005864,-115.9000000586,-4.E-02)); +#415244 = DIRECTION('',(0.,0.,-1.)); +#415245 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#415246 = ORIENTED_EDGE('',*,*,#415247,.F.); +#415247 = EDGE_CURVE('',#415248,#415239,#415250,.T.); +#415248 = VERTEX_POINT('',#415249); +#415249 = CARTESIAN_POINT('',(148.0375,-115.75,0.)); +#415250 = LINE('',#415251,#415252); +#415251 = CARTESIAN_POINT('',(148.0375,-115.75,0.)); +#415252 = VECTOR('',#415253,1.); +#415253 = DIRECTION('',(0.,0.,-1.)); +#415254 = ORIENTED_EDGE('',*,*,#415255,.F.); +#415255 = EDGE_CURVE('',#415229,#415248,#415256,.T.); +#415256 = CIRCLE('',#415257,0.150000058649); +#415257 = AXIS2_PLACEMENT_3D('',#415258,#415259,#415260); +#415258 = CARTESIAN_POINT('',(148.03750005864,-115.9000000586,0.)); +#415259 = DIRECTION('',(0.,0.,-1.)); +#415260 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#415261 = CYLINDRICAL_SURFACE('',#415262,0.150000058649); +#415262 = AXIS2_PLACEMENT_3D('',#415263,#415264,#415265); +#415263 = CARTESIAN_POINT('',(148.03750005864,-115.9000000586,0.)); +#415264 = DIRECTION('',(-0.,-0.,1.)); +#415265 = DIRECTION('',(-1.,3.909953142369E-07,0.)); +#415266 = ADVANCED_FACE('',(#415267),#415292,.F.); +#415267 = FACE_BOUND('',#415268,.F.); +#415268 = EDGE_LOOP('',(#415269,#415270,#415278,#415286)); +#415269 = ORIENTED_EDGE('',*,*,#415247,.T.); +#415270 = ORIENTED_EDGE('',*,*,#415271,.T.); +#415271 = EDGE_CURVE('',#415239,#415272,#415274,.T.); +#415272 = VERTEX_POINT('',#415273); +#415273 = CARTESIAN_POINT('',(149.2125,-115.75,-4.E-02)); +#415274 = LINE('',#415275,#415276); +#415275 = CARTESIAN_POINT('',(148.0375,-115.75,-4.E-02)); +#415276 = VECTOR('',#415277,1.); +#415277 = DIRECTION('',(1.,0.,0.)); +#415278 = ORIENTED_EDGE('',*,*,#415279,.F.); +#415279 = EDGE_CURVE('',#415280,#415272,#415282,.T.); +#415280 = VERTEX_POINT('',#415281); +#415281 = CARTESIAN_POINT('',(149.2125,-115.75,0.)); +#415282 = LINE('',#415283,#415284); +#415283 = CARTESIAN_POINT('',(149.2125,-115.75,0.)); +#415284 = VECTOR('',#415285,1.); +#415285 = DIRECTION('',(0.,0.,-1.)); +#415286 = ORIENTED_EDGE('',*,*,#415287,.F.); +#415287 = EDGE_CURVE('',#415248,#415280,#415288,.T.); +#415288 = LINE('',#415289,#415290); +#415289 = CARTESIAN_POINT('',(148.0375,-115.75,0.)); +#415290 = VECTOR('',#415291,1.); +#415291 = DIRECTION('',(1.,0.,0.)); +#415292 = PLANE('',#415293); +#415293 = AXIS2_PLACEMENT_3D('',#415294,#415295,#415296); +#415294 = CARTESIAN_POINT('',(148.0375,-115.75,0.)); +#415295 = DIRECTION('',(0.,-1.,0.)); +#415296 = DIRECTION('',(1.,0.,0.)); +#415297 = ADVANCED_FACE('',(#415298),#415325,.T.); +#415298 = FACE_BOUND('',#415299,.F.); +#415299 = EDGE_LOOP('',(#415300,#415301,#415310,#415318)); +#415300 = ORIENTED_EDGE('',*,*,#415279,.T.); +#415301 = ORIENTED_EDGE('',*,*,#415302,.T.); +#415302 = EDGE_CURVE('',#415272,#415303,#415305,.T.); +#415303 = VERTEX_POINT('',#415304); +#415304 = CARTESIAN_POINT('',(149.3625,-115.9,-4.E-02)); +#415305 = CIRCLE('',#415306,0.150000058649); +#415306 = AXIS2_PLACEMENT_3D('',#415307,#415308,#415309); +#415307 = CARTESIAN_POINT('',(149.21249994135,-115.9000000586,-4.E-02)); +#415308 = DIRECTION('',(0.,0.,-1.)); +#415309 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#415310 = ORIENTED_EDGE('',*,*,#415311,.F.); +#415311 = EDGE_CURVE('',#415312,#415303,#415314,.T.); +#415312 = VERTEX_POINT('',#415313); +#415313 = CARTESIAN_POINT('',(149.3625,-115.9,0.)); +#415314 = LINE('',#415315,#415316); +#415315 = CARTESIAN_POINT('',(149.3625,-115.9,0.)); +#415316 = VECTOR('',#415317,1.); +#415317 = DIRECTION('',(0.,0.,-1.)); +#415318 = ORIENTED_EDGE('',*,*,#415319,.F.); +#415319 = EDGE_CURVE('',#415280,#415312,#415320,.T.); +#415320 = CIRCLE('',#415321,0.150000058649); +#415321 = AXIS2_PLACEMENT_3D('',#415322,#415323,#415324); +#415322 = CARTESIAN_POINT('',(149.21249994135,-115.9000000586,0.)); +#415323 = DIRECTION('',(0.,0.,-1.)); +#415324 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#415325 = CYLINDRICAL_SURFACE('',#415326,0.150000058649); +#415326 = AXIS2_PLACEMENT_3D('',#415327,#415328,#415329); +#415327 = CARTESIAN_POINT('',(149.21249994135,-115.9000000586,0.)); +#415328 = DIRECTION('',(-0.,-0.,1.)); +#415329 = DIRECTION('',(3.90995408976E-07,1.,0.)); +#415330 = ADVANCED_FACE('',(#415331),#415356,.F.); +#415331 = FACE_BOUND('',#415332,.F.); +#415332 = EDGE_LOOP('',(#415333,#415334,#415342,#415350)); +#415333 = ORIENTED_EDGE('',*,*,#415311,.T.); +#415334 = ORIENTED_EDGE('',*,*,#415335,.T.); +#415335 = EDGE_CURVE('',#415303,#415336,#415338,.T.); +#415336 = VERTEX_POINT('',#415337); +#415337 = CARTESIAN_POINT('',(149.3625,-116.2,-4.E-02)); +#415338 = LINE('',#415339,#415340); +#415339 = CARTESIAN_POINT('',(149.3625,-115.9,-4.E-02)); +#415340 = VECTOR('',#415341,1.); +#415341 = DIRECTION('',(0.,-1.,0.)); +#415342 = ORIENTED_EDGE('',*,*,#415343,.F.); +#415343 = EDGE_CURVE('',#415344,#415336,#415346,.T.); +#415344 = VERTEX_POINT('',#415345); +#415345 = CARTESIAN_POINT('',(149.3625,-116.2,0.)); +#415346 = LINE('',#415347,#415348); +#415347 = CARTESIAN_POINT('',(149.3625,-116.2,0.)); +#415348 = VECTOR('',#415349,1.); +#415349 = DIRECTION('',(0.,0.,-1.)); +#415350 = ORIENTED_EDGE('',*,*,#415351,.F.); +#415351 = EDGE_CURVE('',#415312,#415344,#415352,.T.); +#415352 = LINE('',#415353,#415354); +#415353 = CARTESIAN_POINT('',(149.3625,-115.9,0.)); +#415354 = VECTOR('',#415355,1.); +#415355 = DIRECTION('',(0.,-1.,0.)); +#415356 = PLANE('',#415357); +#415357 = AXIS2_PLACEMENT_3D('',#415358,#415359,#415360); +#415358 = CARTESIAN_POINT('',(149.3625,-115.9,0.)); +#415359 = DIRECTION('',(-1.,-0.,-0.)); +#415360 = DIRECTION('',(0.,-1.,0.)); +#415361 = ADVANCED_FACE('',(#415362),#415389,.T.); +#415362 = FACE_BOUND('',#415363,.F.); +#415363 = EDGE_LOOP('',(#415364,#415365,#415374,#415382)); +#415364 = ORIENTED_EDGE('',*,*,#415343,.T.); +#415365 = ORIENTED_EDGE('',*,*,#415366,.T.); +#415366 = EDGE_CURVE('',#415336,#415367,#415369,.T.); +#415367 = VERTEX_POINT('',#415368); +#415368 = CARTESIAN_POINT('',(149.2125,-116.35,-4.E-02)); +#415369 = CIRCLE('',#415370,0.150000058649); +#415370 = AXIS2_PLACEMENT_3D('',#415371,#415372,#415373); +#415371 = CARTESIAN_POINT('',(149.21249994135,-116.1999999413,-4.E-02)); +#415372 = DIRECTION('',(0.,0.,-1.)); +#415373 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#415374 = ORIENTED_EDGE('',*,*,#415375,.F.); +#415375 = EDGE_CURVE('',#415376,#415367,#415378,.T.); +#415376 = VERTEX_POINT('',#415377); +#415377 = CARTESIAN_POINT('',(149.2125,-116.35,0.)); +#415378 = LINE('',#415379,#415380); +#415379 = CARTESIAN_POINT('',(149.2125,-116.35,0.)); +#415380 = VECTOR('',#415381,1.); +#415381 = DIRECTION('',(0.,0.,-1.)); +#415382 = ORIENTED_EDGE('',*,*,#415383,.F.); +#415383 = EDGE_CURVE('',#415344,#415376,#415384,.T.); +#415384 = CIRCLE('',#415385,0.150000058649); +#415385 = AXIS2_PLACEMENT_3D('',#415386,#415387,#415388); +#415386 = CARTESIAN_POINT('',(149.21249994135,-116.1999999413,0.)); +#415387 = DIRECTION('',(0.,0.,-1.)); +#415388 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#415389 = CYLINDRICAL_SURFACE('',#415390,0.150000058649); +#415390 = AXIS2_PLACEMENT_3D('',#415391,#415392,#415393); +#415391 = CARTESIAN_POINT('',(149.21249994135,-116.1999999413,0.)); +#415392 = DIRECTION('',(-0.,-0.,1.)); +#415393 = DIRECTION('',(1.,-3.909954089759E-07,0.)); +#415394 = ADVANCED_FACE('',(#415395),#415420,.F.); +#415395 = FACE_BOUND('',#415396,.F.); +#415396 = EDGE_LOOP('',(#415397,#415398,#415406,#415414)); +#415397 = ORIENTED_EDGE('',*,*,#415375,.T.); +#415398 = ORIENTED_EDGE('',*,*,#415399,.T.); +#415399 = EDGE_CURVE('',#415367,#415400,#415402,.T.); +#415400 = VERTEX_POINT('',#415401); +#415401 = CARTESIAN_POINT('',(148.0375,-116.35,-4.E-02)); +#415402 = LINE('',#415403,#415404); +#415403 = CARTESIAN_POINT('',(149.2125,-116.35,-4.E-02)); +#415404 = VECTOR('',#415405,1.); +#415405 = DIRECTION('',(-1.,0.,0.)); +#415406 = ORIENTED_EDGE('',*,*,#415407,.F.); +#415407 = EDGE_CURVE('',#415408,#415400,#415410,.T.); +#415408 = VERTEX_POINT('',#415409); +#415409 = CARTESIAN_POINT('',(148.0375,-116.35,0.)); +#415410 = LINE('',#415411,#415412); +#415411 = CARTESIAN_POINT('',(148.0375,-116.35,0.)); +#415412 = VECTOR('',#415413,1.); +#415413 = DIRECTION('',(0.,0.,-1.)); +#415414 = ORIENTED_EDGE('',*,*,#415415,.F.); +#415415 = EDGE_CURVE('',#415376,#415408,#415416,.T.); +#415416 = LINE('',#415417,#415418); +#415417 = CARTESIAN_POINT('',(149.2125,-116.35,0.)); +#415418 = VECTOR('',#415419,1.); +#415419 = DIRECTION('',(-1.,0.,0.)); +#415420 = PLANE('',#415421); +#415421 = AXIS2_PLACEMENT_3D('',#415422,#415423,#415424); +#415422 = CARTESIAN_POINT('',(149.2125,-116.35,0.)); +#415423 = DIRECTION('',(0.,1.,0.)); +#415424 = DIRECTION('',(-1.,0.,0.)); +#415425 = ADVANCED_FACE('',(#415426),#415453,.T.); +#415426 = FACE_BOUND('',#415427,.F.); +#415427 = EDGE_LOOP('',(#415428,#415429,#415438,#415446)); +#415428 = ORIENTED_EDGE('',*,*,#415407,.T.); +#415429 = ORIENTED_EDGE('',*,*,#415430,.T.); +#415430 = EDGE_CURVE('',#415400,#415431,#415433,.T.); +#415431 = VERTEX_POINT('',#415432); +#415432 = CARTESIAN_POINT('',(147.8875,-116.2,-4.E-02)); +#415433 = CIRCLE('',#415434,0.150000058649); +#415434 = AXIS2_PLACEMENT_3D('',#415435,#415436,#415437); +#415435 = CARTESIAN_POINT('',(148.03750005864,-116.1999999413,-4.E-02)); +#415436 = DIRECTION('',(0.,0.,-1.)); +#415437 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#415438 = ORIENTED_EDGE('',*,*,#415439,.F.); +#415439 = EDGE_CURVE('',#415440,#415431,#415442,.T.); +#415440 = VERTEX_POINT('',#415441); +#415441 = CARTESIAN_POINT('',(147.8875,-116.2,0.)); +#415442 = LINE('',#415443,#415444); +#415443 = CARTESIAN_POINT('',(147.8875,-116.2,0.)); +#415444 = VECTOR('',#415445,1.); +#415445 = DIRECTION('',(0.,0.,-1.)); +#415446 = ORIENTED_EDGE('',*,*,#415447,.F.); +#415447 = EDGE_CURVE('',#415408,#415440,#415448,.T.); +#415448 = CIRCLE('',#415449,0.150000058649); +#415449 = AXIS2_PLACEMENT_3D('',#415450,#415451,#415452); +#415450 = CARTESIAN_POINT('',(148.03750005864,-116.1999999413,0.)); +#415451 = DIRECTION('',(0.,0.,-1.)); +#415452 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#415453 = CYLINDRICAL_SURFACE('',#415454,0.150000058649); +#415454 = AXIS2_PLACEMENT_3D('',#415455,#415456,#415457); +#415455 = CARTESIAN_POINT('',(148.03750005864,-116.1999999413,0.)); +#415456 = DIRECTION('',(-0.,-0.,1.)); +#415457 = DIRECTION('',(-3.90995408976E-07,-1.,-0.)); +#415458 = ADVANCED_FACE('',(#415459),#415475,.F.); +#415459 = FACE_BOUND('',#415460,.F.); +#415460 = EDGE_LOOP('',(#415461,#415462,#415468,#415469)); +#415461 = ORIENTED_EDGE('',*,*,#415439,.T.); +#415462 = ORIENTED_EDGE('',*,*,#415463,.T.); +#415463 = EDGE_CURVE('',#415431,#415231,#415464,.T.); +#415464 = LINE('',#415465,#415466); +#415465 = CARTESIAN_POINT('',(147.8875,-116.2,-4.E-02)); +#415466 = VECTOR('',#415467,1.); +#415467 = DIRECTION('',(0.,1.,0.)); +#415468 = ORIENTED_EDGE('',*,*,#415228,.F.); +#415469 = ORIENTED_EDGE('',*,*,#415470,.F.); +#415470 = EDGE_CURVE('',#415440,#415229,#415471,.T.); +#415471 = LINE('',#415472,#415473); +#415472 = CARTESIAN_POINT('',(147.8875,-116.2,0.)); +#415473 = VECTOR('',#415474,1.); +#415474 = DIRECTION('',(0.,1.,0.)); +#415475 = PLANE('',#415476); +#415476 = AXIS2_PLACEMENT_3D('',#415477,#415478,#415479); +#415477 = CARTESIAN_POINT('',(147.8875,-116.2,0.)); +#415478 = DIRECTION('',(1.,-0.,0.)); +#415479 = DIRECTION('',(0.,1.,0.)); +#415480 = ADVANCED_FACE('',(#415481),#415491,.F.); +#415481 = FACE_BOUND('',#415482,.F.); +#415482 = EDGE_LOOP('',(#415483,#415484,#415485,#415486,#415487,#415488, + #415489,#415490)); +#415483 = ORIENTED_EDGE('',*,*,#415255,.T.); +#415484 = ORIENTED_EDGE('',*,*,#415287,.T.); +#415485 = ORIENTED_EDGE('',*,*,#415319,.T.); +#415486 = ORIENTED_EDGE('',*,*,#415351,.T.); +#415487 = ORIENTED_EDGE('',*,*,#415383,.T.); +#415488 = ORIENTED_EDGE('',*,*,#415415,.T.); +#415489 = ORIENTED_EDGE('',*,*,#415447,.T.); +#415490 = ORIENTED_EDGE('',*,*,#415470,.T.); +#415491 = PLANE('',#415492); +#415492 = AXIS2_PLACEMENT_3D('',#415493,#415494,#415495); +#415493 = CARTESIAN_POINT('',(0.,0.,0.)); +#415494 = DIRECTION('',(-0.,-0.,-1.)); +#415495 = DIRECTION('',(-1.,0.,0.)); +#415496 = ADVANCED_FACE('',(#415497),#415507,.T.); +#415497 = FACE_BOUND('',#415498,.T.); +#415498 = EDGE_LOOP('',(#415499,#415500,#415501,#415502,#415503,#415504, + #415505,#415506)); +#415499 = ORIENTED_EDGE('',*,*,#415238,.T.); +#415500 = ORIENTED_EDGE('',*,*,#415271,.T.); +#415501 = ORIENTED_EDGE('',*,*,#415302,.T.); +#415502 = ORIENTED_EDGE('',*,*,#415335,.T.); +#415503 = ORIENTED_EDGE('',*,*,#415366,.T.); +#415504 = ORIENTED_EDGE('',*,*,#415399,.T.); +#415505 = ORIENTED_EDGE('',*,*,#415430,.T.); +#415506 = ORIENTED_EDGE('',*,*,#415463,.T.); +#415507 = PLANE('',#415508); +#415508 = AXIS2_PLACEMENT_3D('',#415509,#415510,#415511); +#415509 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#415510 = DIRECTION('',(-0.,-0.,-1.)); +#415511 = DIRECTION('',(-1.,0.,0.)); +#415512 = MANIFOLD_SOLID_BREP('',#415513); +#415513 = CLOSED_SHELL('',(#415514,#415556,#415587,#415620,#415651, + #415684,#415715,#415748,#415770,#415786)); +#415514 = ADVANCED_FACE('',(#415515),#415551,.T.); +#415515 = FACE_BOUND('',#415516,.F.); +#415516 = EDGE_LOOP('',(#415517,#415527,#415536,#415544)); +#415517 = ORIENTED_EDGE('',*,*,#415518,.T.); +#415518 = EDGE_CURVE('',#415519,#415521,#415523,.T.); +#415519 = VERTEX_POINT('',#415520); +#415520 = CARTESIAN_POINT('',(130.95,-105.025,0.)); +#415521 = VERTEX_POINT('',#415522); +#415522 = CARTESIAN_POINT('',(130.95,-105.025,-4.E-02)); +#415523 = LINE('',#415524,#415525); +#415524 = CARTESIAN_POINT('',(130.95,-105.025,0.)); +#415525 = VECTOR('',#415526,1.); +#415526 = DIRECTION('',(0.,0.,-1.)); +#415527 = ORIENTED_EDGE('',*,*,#415528,.T.); +#415528 = EDGE_CURVE('',#415521,#415529,#415531,.T.); +#415529 = VERTEX_POINT('',#415530); +#415530 = CARTESIAN_POINT('',(131.2,-104.775,-4.E-02)); +#415531 = CIRCLE('',#415532,0.249998959685); +#415532 = AXIS2_PLACEMENT_3D('',#415533,#415534,#415535); +#415533 = CARTESIAN_POINT('',(131.19999895968,-105.0249989596,-4.E-02)); +#415534 = DIRECTION('',(0.,0.,-1.)); +#415535 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#415536 = ORIENTED_EDGE('',*,*,#415537,.F.); +#415537 = EDGE_CURVE('',#415538,#415529,#415540,.T.); +#415538 = VERTEX_POINT('',#415539); +#415539 = CARTESIAN_POINT('',(131.2,-104.775,0.)); +#415540 = LINE('',#415541,#415542); +#415541 = CARTESIAN_POINT('',(131.2,-104.775,0.)); +#415542 = VECTOR('',#415543,1.); +#415543 = DIRECTION('',(0.,0.,-1.)); +#415544 = ORIENTED_EDGE('',*,*,#415545,.F.); +#415545 = EDGE_CURVE('',#415519,#415538,#415546,.T.); +#415546 = CIRCLE('',#415547,0.249998959685); +#415547 = AXIS2_PLACEMENT_3D('',#415548,#415549,#415550); +#415548 = CARTESIAN_POINT('',(131.19999895968,-105.0249989596,0.)); +#415549 = DIRECTION('',(0.,0.,-1.)); +#415550 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#415551 = CYLINDRICAL_SURFACE('',#415552,0.249998959685); +#415552 = AXIS2_PLACEMENT_3D('',#415553,#415554,#415555); +#415553 = CARTESIAN_POINT('',(131.19999895968,-105.0249989596,0.)); +#415554 = DIRECTION('',(-0.,-0.,1.)); +#415555 = DIRECTION('',(-0.999999999991,-4.161285780223E-06,-0.)); +#415556 = ADVANCED_FACE('',(#415557),#415582,.F.); +#415557 = FACE_BOUND('',#415558,.F.); +#415558 = EDGE_LOOP('',(#415559,#415560,#415568,#415576)); +#415559 = ORIENTED_EDGE('',*,*,#415537,.T.); +#415560 = ORIENTED_EDGE('',*,*,#415561,.T.); +#415561 = EDGE_CURVE('',#415529,#415562,#415564,.T.); +#415562 = VERTEX_POINT('',#415563); +#415563 = CARTESIAN_POINT('',(131.7,-104.775,-4.E-02)); +#415564 = LINE('',#415565,#415566); +#415565 = CARTESIAN_POINT('',(131.2,-104.775,-4.E-02)); +#415566 = VECTOR('',#415567,1.); +#415567 = DIRECTION('',(1.,0.,0.)); +#415568 = ORIENTED_EDGE('',*,*,#415569,.F.); +#415569 = EDGE_CURVE('',#415570,#415562,#415572,.T.); +#415570 = VERTEX_POINT('',#415571); +#415571 = CARTESIAN_POINT('',(131.7,-104.775,0.)); +#415572 = LINE('',#415573,#415574); +#415573 = CARTESIAN_POINT('',(131.7,-104.775,0.)); +#415574 = VECTOR('',#415575,1.); +#415575 = DIRECTION('',(0.,0.,-1.)); +#415576 = ORIENTED_EDGE('',*,*,#415577,.F.); +#415577 = EDGE_CURVE('',#415538,#415570,#415578,.T.); +#415578 = LINE('',#415579,#415580); +#415579 = CARTESIAN_POINT('',(131.2,-104.775,0.)); +#415580 = VECTOR('',#415581,1.); +#415581 = DIRECTION('',(1.,0.,0.)); +#415582 = PLANE('',#415583); +#415583 = AXIS2_PLACEMENT_3D('',#415584,#415585,#415586); +#415584 = CARTESIAN_POINT('',(131.2,-104.775,0.)); +#415585 = DIRECTION('',(0.,-1.,0.)); +#415586 = DIRECTION('',(1.,0.,0.)); +#415587 = ADVANCED_FACE('',(#415588),#415615,.T.); +#415588 = FACE_BOUND('',#415589,.F.); +#415589 = EDGE_LOOP('',(#415590,#415591,#415600,#415608)); +#415590 = ORIENTED_EDGE('',*,*,#415569,.T.); +#415591 = ORIENTED_EDGE('',*,*,#415592,.T.); +#415592 = EDGE_CURVE('',#415562,#415593,#415595,.T.); +#415593 = VERTEX_POINT('',#415594); +#415594 = CARTESIAN_POINT('',(131.95,-105.025,-4.E-02)); +#415595 = CIRCLE('',#415596,0.249998959685); +#415596 = AXIS2_PLACEMENT_3D('',#415597,#415598,#415599); +#415597 = CARTESIAN_POINT('',(131.70000104031,-105.0249989596,-4.E-02)); +#415598 = DIRECTION('',(0.,0.,-1.)); +#415599 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#415600 = ORIENTED_EDGE('',*,*,#415601,.F.); +#415601 = EDGE_CURVE('',#415602,#415593,#415604,.T.); +#415602 = VERTEX_POINT('',#415603); +#415603 = CARTESIAN_POINT('',(131.95,-105.025,0.)); +#415604 = LINE('',#415605,#415606); +#415605 = CARTESIAN_POINT('',(131.95,-105.025,0.)); +#415606 = VECTOR('',#415607,1.); +#415607 = DIRECTION('',(0.,0.,-1.)); +#415608 = ORIENTED_EDGE('',*,*,#415609,.F.); +#415609 = EDGE_CURVE('',#415570,#415602,#415610,.T.); +#415610 = CIRCLE('',#415611,0.249998959685); +#415611 = AXIS2_PLACEMENT_3D('',#415612,#415613,#415614); +#415612 = CARTESIAN_POINT('',(131.70000104031,-105.0249989596,0.)); +#415613 = DIRECTION('',(0.,0.,-1.)); +#415614 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#415615 = CYLINDRICAL_SURFACE('',#415616,0.249998959685); +#415616 = AXIS2_PLACEMENT_3D('',#415617,#415618,#415619); +#415617 = CARTESIAN_POINT('',(131.70000104031,-105.0249989596,0.)); +#415618 = DIRECTION('',(-0.,-0.,1.)); +#415619 = DIRECTION('',(-4.161285950754E-06,0.999999999991,0.)); +#415620 = ADVANCED_FACE('',(#415621),#415646,.F.); +#415621 = FACE_BOUND('',#415622,.F.); +#415622 = EDGE_LOOP('',(#415623,#415624,#415632,#415640)); +#415623 = ORIENTED_EDGE('',*,*,#415601,.T.); +#415624 = ORIENTED_EDGE('',*,*,#415625,.T.); +#415625 = EDGE_CURVE('',#415593,#415626,#415628,.T.); +#415626 = VERTEX_POINT('',#415627); +#415627 = CARTESIAN_POINT('',(131.95,-105.975,-4.E-02)); +#415628 = LINE('',#415629,#415630); +#415629 = CARTESIAN_POINT('',(131.95,-105.025,-4.E-02)); +#415630 = VECTOR('',#415631,1.); +#415631 = DIRECTION('',(0.,-1.,0.)); +#415632 = ORIENTED_EDGE('',*,*,#415633,.F.); +#415633 = EDGE_CURVE('',#415634,#415626,#415636,.T.); +#415634 = VERTEX_POINT('',#415635); +#415635 = CARTESIAN_POINT('',(131.95,-105.975,0.)); +#415636 = LINE('',#415637,#415638); +#415637 = CARTESIAN_POINT('',(131.95,-105.975,0.)); +#415638 = VECTOR('',#415639,1.); +#415639 = DIRECTION('',(0.,0.,-1.)); +#415640 = ORIENTED_EDGE('',*,*,#415641,.F.); +#415641 = EDGE_CURVE('',#415602,#415634,#415642,.T.); +#415642 = LINE('',#415643,#415644); +#415643 = CARTESIAN_POINT('',(131.95,-105.025,0.)); +#415644 = VECTOR('',#415645,1.); +#415645 = DIRECTION('',(0.,-1.,0.)); +#415646 = PLANE('',#415647); +#415647 = AXIS2_PLACEMENT_3D('',#415648,#415649,#415650); +#415648 = CARTESIAN_POINT('',(131.95,-105.025,0.)); +#415649 = DIRECTION('',(-1.,-0.,-0.)); +#415650 = DIRECTION('',(0.,-1.,0.)); +#415651 = ADVANCED_FACE('',(#415652),#415679,.T.); +#415652 = FACE_BOUND('',#415653,.F.); +#415653 = EDGE_LOOP('',(#415654,#415655,#415664,#415672)); +#415654 = ORIENTED_EDGE('',*,*,#415633,.T.); +#415655 = ORIENTED_EDGE('',*,*,#415656,.T.); +#415656 = EDGE_CURVE('',#415626,#415657,#415659,.T.); +#415657 = VERTEX_POINT('',#415658); +#415658 = CARTESIAN_POINT('',(131.7,-106.225,-4.E-02)); +#415659 = CIRCLE('',#415660,0.249998959685); +#415660 = AXIS2_PLACEMENT_3D('',#415661,#415662,#415663); +#415661 = CARTESIAN_POINT('',(131.70000104031,-105.9750010403,-4.E-02)); +#415662 = DIRECTION('',(0.,0.,-1.)); +#415663 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#415664 = ORIENTED_EDGE('',*,*,#415665,.F.); +#415665 = EDGE_CURVE('',#415666,#415657,#415668,.T.); +#415666 = VERTEX_POINT('',#415667); +#415667 = CARTESIAN_POINT('',(131.7,-106.225,0.)); +#415668 = LINE('',#415669,#415670); +#415669 = CARTESIAN_POINT('',(131.7,-106.225,0.)); +#415670 = VECTOR('',#415671,1.); +#415671 = DIRECTION('',(0.,0.,-1.)); +#415672 = ORIENTED_EDGE('',*,*,#415673,.F.); +#415673 = EDGE_CURVE('',#415634,#415666,#415674,.T.); +#415674 = CIRCLE('',#415675,0.249998959685); +#415675 = AXIS2_PLACEMENT_3D('',#415676,#415677,#415678); +#415676 = CARTESIAN_POINT('',(131.70000104031,-105.9750010403,0.)); +#415677 = DIRECTION('',(0.,0.,-1.)); +#415678 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#415679 = CYLINDRICAL_SURFACE('',#415680,0.249998959685); +#415680 = AXIS2_PLACEMENT_3D('',#415681,#415682,#415683); +#415681 = CARTESIAN_POINT('',(131.70000104031,-105.9750010403,0.)); +#415682 = DIRECTION('',(-0.,-0.,1.)); +#415683 = DIRECTION('',(0.999999999991,4.161285950754E-06,0.)); +#415684 = ADVANCED_FACE('',(#415685),#415710,.F.); +#415685 = FACE_BOUND('',#415686,.F.); +#415686 = EDGE_LOOP('',(#415687,#415688,#415696,#415704)); +#415687 = ORIENTED_EDGE('',*,*,#415665,.T.); +#415688 = ORIENTED_EDGE('',*,*,#415689,.T.); +#415689 = EDGE_CURVE('',#415657,#415690,#415692,.T.); +#415690 = VERTEX_POINT('',#415691); +#415691 = CARTESIAN_POINT('',(131.2,-106.225,-4.E-02)); +#415692 = LINE('',#415693,#415694); +#415693 = CARTESIAN_POINT('',(131.7,-106.225,-4.E-02)); +#415694 = VECTOR('',#415695,1.); +#415695 = DIRECTION('',(-1.,0.,0.)); +#415696 = ORIENTED_EDGE('',*,*,#415697,.F.); +#415697 = EDGE_CURVE('',#415698,#415690,#415700,.T.); +#415698 = VERTEX_POINT('',#415699); +#415699 = CARTESIAN_POINT('',(131.2,-106.225,0.)); +#415700 = LINE('',#415701,#415702); +#415701 = CARTESIAN_POINT('',(131.2,-106.225,0.)); +#415702 = VECTOR('',#415703,1.); +#415703 = DIRECTION('',(0.,0.,-1.)); +#415704 = ORIENTED_EDGE('',*,*,#415705,.F.); +#415705 = EDGE_CURVE('',#415666,#415698,#415706,.T.); +#415706 = LINE('',#415707,#415708); +#415707 = CARTESIAN_POINT('',(131.7,-106.225,0.)); +#415708 = VECTOR('',#415709,1.); +#415709 = DIRECTION('',(-1.,0.,0.)); +#415710 = PLANE('',#415711); +#415711 = AXIS2_PLACEMENT_3D('',#415712,#415713,#415714); +#415712 = CARTESIAN_POINT('',(131.7,-106.225,0.)); +#415713 = DIRECTION('',(0.,1.,0.)); +#415714 = DIRECTION('',(-1.,0.,0.)); +#415715 = ADVANCED_FACE('',(#415716),#415743,.T.); +#415716 = FACE_BOUND('',#415717,.F.); +#415717 = EDGE_LOOP('',(#415718,#415719,#415728,#415736)); +#415718 = ORIENTED_EDGE('',*,*,#415697,.T.); +#415719 = ORIENTED_EDGE('',*,*,#415720,.T.); +#415720 = EDGE_CURVE('',#415690,#415721,#415723,.T.); +#415721 = VERTEX_POINT('',#415722); +#415722 = CARTESIAN_POINT('',(130.95,-105.975,-4.E-02)); +#415723 = CIRCLE('',#415724,0.249998959685); +#415724 = AXIS2_PLACEMENT_3D('',#415725,#415726,#415727); +#415725 = CARTESIAN_POINT('',(131.19999895968,-105.9750010403,-4.E-02)); +#415726 = DIRECTION('',(0.,0.,-1.)); +#415727 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415728 = ORIENTED_EDGE('',*,*,#415729,.F.); +#415729 = EDGE_CURVE('',#415730,#415721,#415732,.T.); +#415730 = VERTEX_POINT('',#415731); +#415731 = CARTESIAN_POINT('',(130.95,-105.975,0.)); +#415732 = LINE('',#415733,#415734); +#415733 = CARTESIAN_POINT('',(130.95,-105.975,0.)); +#415734 = VECTOR('',#415735,1.); +#415735 = DIRECTION('',(0.,0.,-1.)); +#415736 = ORIENTED_EDGE('',*,*,#415737,.F.); +#415737 = EDGE_CURVE('',#415698,#415730,#415738,.T.); +#415738 = CIRCLE('',#415739,0.249998959685); +#415739 = AXIS2_PLACEMENT_3D('',#415740,#415741,#415742); +#415740 = CARTESIAN_POINT('',(131.19999895968,-105.9750010403,0.)); +#415741 = DIRECTION('',(0.,0.,-1.)); +#415742 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415743 = CYLINDRICAL_SURFACE('',#415744,0.249998959685); +#415744 = AXIS2_PLACEMENT_3D('',#415745,#415746,#415747); +#415745 = CARTESIAN_POINT('',(131.19999895968,-105.9750010403,0.)); +#415746 = DIRECTION('',(-0.,-0.,1.)); +#415747 = DIRECTION('',(4.161285837066E-06,-0.999999999991,0.)); +#415748 = ADVANCED_FACE('',(#415749),#415765,.F.); +#415749 = FACE_BOUND('',#415750,.F.); +#415750 = EDGE_LOOP('',(#415751,#415752,#415758,#415759)); +#415751 = ORIENTED_EDGE('',*,*,#415729,.T.); +#415752 = ORIENTED_EDGE('',*,*,#415753,.T.); +#415753 = EDGE_CURVE('',#415721,#415521,#415754,.T.); +#415754 = LINE('',#415755,#415756); +#415755 = CARTESIAN_POINT('',(130.95,-105.975,-4.E-02)); +#415756 = VECTOR('',#415757,1.); +#415757 = DIRECTION('',(0.,1.,0.)); +#415758 = ORIENTED_EDGE('',*,*,#415518,.F.); +#415759 = ORIENTED_EDGE('',*,*,#415760,.F.); +#415760 = EDGE_CURVE('',#415730,#415519,#415761,.T.); +#415761 = LINE('',#415762,#415763); +#415762 = CARTESIAN_POINT('',(130.95,-105.975,0.)); +#415763 = VECTOR('',#415764,1.); +#415764 = DIRECTION('',(0.,1.,0.)); +#415765 = PLANE('',#415766); +#415766 = AXIS2_PLACEMENT_3D('',#415767,#415768,#415769); +#415767 = CARTESIAN_POINT('',(130.95,-105.975,0.)); +#415768 = DIRECTION('',(1.,-0.,0.)); +#415769 = DIRECTION('',(0.,1.,0.)); +#415770 = ADVANCED_FACE('',(#415771),#415781,.F.); +#415771 = FACE_BOUND('',#415772,.F.); +#415772 = EDGE_LOOP('',(#415773,#415774,#415775,#415776,#415777,#415778, + #415779,#415780)); +#415773 = ORIENTED_EDGE('',*,*,#415545,.T.); +#415774 = ORIENTED_EDGE('',*,*,#415577,.T.); +#415775 = ORIENTED_EDGE('',*,*,#415609,.T.); +#415776 = ORIENTED_EDGE('',*,*,#415641,.T.); +#415777 = ORIENTED_EDGE('',*,*,#415673,.T.); +#415778 = ORIENTED_EDGE('',*,*,#415705,.T.); +#415779 = ORIENTED_EDGE('',*,*,#415737,.T.); +#415780 = ORIENTED_EDGE('',*,*,#415760,.T.); +#415781 = PLANE('',#415782); +#415782 = AXIS2_PLACEMENT_3D('',#415783,#415784,#415785); +#415783 = CARTESIAN_POINT('',(0.,0.,0.)); +#415784 = DIRECTION('',(-0.,-0.,-1.)); +#415785 = DIRECTION('',(-1.,0.,0.)); +#415786 = ADVANCED_FACE('',(#415787),#415797,.T.); +#415787 = FACE_BOUND('',#415788,.T.); +#415788 = EDGE_LOOP('',(#415789,#415790,#415791,#415792,#415793,#415794, + #415795,#415796)); +#415789 = ORIENTED_EDGE('',*,*,#415528,.T.); +#415790 = ORIENTED_EDGE('',*,*,#415561,.T.); +#415791 = ORIENTED_EDGE('',*,*,#415592,.T.); +#415792 = ORIENTED_EDGE('',*,*,#415625,.T.); +#415793 = ORIENTED_EDGE('',*,*,#415656,.T.); +#415794 = ORIENTED_EDGE('',*,*,#415689,.T.); +#415795 = ORIENTED_EDGE('',*,*,#415720,.T.); +#415796 = ORIENTED_EDGE('',*,*,#415753,.T.); +#415797 = PLANE('',#415798); +#415798 = AXIS2_PLACEMENT_3D('',#415799,#415800,#415801); +#415799 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#415800 = DIRECTION('',(-0.,-0.,-1.)); +#415801 = DIRECTION('',(-1.,0.,0.)); +#415802 = MANIFOLD_SOLID_BREP('',#415803); +#415803 = CLOSED_SHELL('',(#415804,#415846,#415877,#415910,#415941, + #415974,#416005,#416038,#416060,#416076)); +#415804 = ADVANCED_FACE('',(#415805),#415841,.T.); +#415805 = FACE_BOUND('',#415806,.F.); +#415806 = EDGE_LOOP('',(#415807,#415817,#415826,#415834)); +#415807 = ORIENTED_EDGE('',*,*,#415808,.T.); +#415808 = EDGE_CURVE('',#415809,#415811,#415813,.T.); +#415809 = VERTEX_POINT('',#415810); +#415810 = CARTESIAN_POINT('',(147.4,-128.715,0.)); +#415811 = VERTEX_POINT('',#415812); +#415812 = CARTESIAN_POINT('',(147.4,-128.715,-4.E-02)); +#415813 = LINE('',#415814,#415815); +#415814 = CARTESIAN_POINT('',(147.4,-128.715,0.)); +#415815 = VECTOR('',#415816,1.); +#415816 = DIRECTION('',(0.,0.,-1.)); +#415817 = ORIENTED_EDGE('',*,*,#415818,.T.); +#415818 = EDGE_CURVE('',#415811,#415819,#415821,.T.); +#415819 = VERTEX_POINT('',#415820); +#415820 = CARTESIAN_POINT('',(147.535,-128.58,-4.E-02)); +#415821 = CIRCLE('',#415822,0.135001418495); +#415822 = AXIS2_PLACEMENT_3D('',#415823,#415824,#415825); +#415823 = CARTESIAN_POINT('',(147.53500141848,-128.7150014184,-4.E-02)); +#415824 = DIRECTION('',(0.,0.,-1.)); +#415825 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#415826 = ORIENTED_EDGE('',*,*,#415827,.F.); +#415827 = EDGE_CURVE('',#415828,#415819,#415830,.T.); +#415828 = VERTEX_POINT('',#415829); +#415829 = CARTESIAN_POINT('',(147.535,-128.58,0.)); +#415830 = LINE('',#415831,#415832); +#415831 = CARTESIAN_POINT('',(147.535,-128.58,0.)); +#415832 = VECTOR('',#415833,1.); +#415833 = DIRECTION('',(0.,0.,-1.)); +#415834 = ORIENTED_EDGE('',*,*,#415835,.F.); +#415835 = EDGE_CURVE('',#415809,#415828,#415836,.T.); +#415836 = CIRCLE('',#415837,0.135001418495); +#415837 = AXIS2_PLACEMENT_3D('',#415838,#415839,#415840); +#415838 = CARTESIAN_POINT('',(147.53500141848,-128.7150014184,0.)); +#415839 = DIRECTION('',(0.,0.,-1.)); +#415840 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#415841 = CYLINDRICAL_SURFACE('',#415842,0.135001418495); +#415842 = AXIS2_PLACEMENT_3D('',#415843,#415844,#415845); +#415843 = CARTESIAN_POINT('',(147.53500141848,-128.7150014184,0.)); +#415844 = DIRECTION('',(-0.,-0.,1.)); +#415845 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#415846 = ADVANCED_FACE('',(#415847),#415872,.F.); +#415847 = FACE_BOUND('',#415848,.F.); +#415848 = EDGE_LOOP('',(#415849,#415850,#415858,#415866)); +#415849 = ORIENTED_EDGE('',*,*,#415827,.T.); +#415850 = ORIENTED_EDGE('',*,*,#415851,.T.); +#415851 = EDGE_CURVE('',#415819,#415852,#415854,.T.); +#415852 = VERTEX_POINT('',#415853); +#415853 = CARTESIAN_POINT('',(147.805,-128.58,-4.E-02)); +#415854 = LINE('',#415855,#415856); +#415855 = CARTESIAN_POINT('',(147.535,-128.58,-4.E-02)); +#415856 = VECTOR('',#415857,1.); +#415857 = DIRECTION('',(1.,0.,0.)); +#415858 = ORIENTED_EDGE('',*,*,#415859,.F.); +#415859 = EDGE_CURVE('',#415860,#415852,#415862,.T.); +#415860 = VERTEX_POINT('',#415861); +#415861 = CARTESIAN_POINT('',(147.805,-128.58,0.)); +#415862 = LINE('',#415863,#415864); +#415863 = CARTESIAN_POINT('',(147.805,-128.58,0.)); +#415864 = VECTOR('',#415865,1.); +#415865 = DIRECTION('',(0.,0.,-1.)); +#415866 = ORIENTED_EDGE('',*,*,#415867,.F.); +#415867 = EDGE_CURVE('',#415828,#415860,#415868,.T.); +#415868 = LINE('',#415869,#415870); +#415869 = CARTESIAN_POINT('',(147.535,-128.58,0.)); +#415870 = VECTOR('',#415871,1.); +#415871 = DIRECTION('',(1.,0.,0.)); +#415872 = PLANE('',#415873); +#415873 = AXIS2_PLACEMENT_3D('',#415874,#415875,#415876); +#415874 = CARTESIAN_POINT('',(147.535,-128.58,0.)); +#415875 = DIRECTION('',(0.,-1.,0.)); +#415876 = DIRECTION('',(1.,0.,0.)); +#415877 = ADVANCED_FACE('',(#415878),#415905,.T.); +#415878 = FACE_BOUND('',#415879,.F.); +#415879 = EDGE_LOOP('',(#415880,#415881,#415890,#415898)); +#415880 = ORIENTED_EDGE('',*,*,#415859,.T.); +#415881 = ORIENTED_EDGE('',*,*,#415882,.T.); +#415882 = EDGE_CURVE('',#415852,#415883,#415885,.T.); +#415883 = VERTEX_POINT('',#415884); +#415884 = CARTESIAN_POINT('',(147.94,-128.715,-4.E-02)); +#415885 = CIRCLE('',#415886,0.135001418495); +#415886 = AXIS2_PLACEMENT_3D('',#415887,#415888,#415889); +#415887 = CARTESIAN_POINT('',(147.80499858151,-128.7150014184,-4.E-02)); +#415888 = DIRECTION('',(0.,0.,-1.)); +#415889 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#415890 = ORIENTED_EDGE('',*,*,#415891,.F.); +#415891 = EDGE_CURVE('',#415892,#415883,#415894,.T.); +#415892 = VERTEX_POINT('',#415893); +#415893 = CARTESIAN_POINT('',(147.94,-128.715,0.)); +#415894 = LINE('',#415895,#415896); +#415895 = CARTESIAN_POINT('',(147.94,-128.715,0.)); +#415896 = VECTOR('',#415897,1.); +#415897 = DIRECTION('',(0.,0.,-1.)); +#415898 = ORIENTED_EDGE('',*,*,#415899,.F.); +#415899 = EDGE_CURVE('',#415860,#415892,#415900,.T.); +#415900 = CIRCLE('',#415901,0.135001418495); +#415901 = AXIS2_PLACEMENT_3D('',#415902,#415903,#415904); +#415902 = CARTESIAN_POINT('',(147.80499858151,-128.7150014184,0.)); +#415903 = DIRECTION('',(0.,0.,-1.)); +#415904 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#415905 = CYLINDRICAL_SURFACE('',#415906,0.135001418495); +#415906 = AXIS2_PLACEMENT_3D('',#415907,#415908,#415909); +#415907 = CARTESIAN_POINT('',(147.80499858151,-128.7150014184,0.)); +#415908 = DIRECTION('',(-0.,-0.,1.)); +#415909 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#415910 = ADVANCED_FACE('',(#415911),#415936,.F.); +#415911 = FACE_BOUND('',#415912,.F.); +#415912 = EDGE_LOOP('',(#415913,#415914,#415922,#415930)); +#415913 = ORIENTED_EDGE('',*,*,#415891,.T.); +#415914 = ORIENTED_EDGE('',*,*,#415915,.T.); +#415915 = EDGE_CURVE('',#415883,#415916,#415918,.T.); +#415916 = VERTEX_POINT('',#415917); +#415917 = CARTESIAN_POINT('',(147.94,-129.085,-4.E-02)); +#415918 = LINE('',#415919,#415920); +#415919 = CARTESIAN_POINT('',(147.94,-128.715,-4.E-02)); +#415920 = VECTOR('',#415921,1.); +#415921 = DIRECTION('',(0.,-1.,0.)); +#415922 = ORIENTED_EDGE('',*,*,#415923,.F.); +#415923 = EDGE_CURVE('',#415924,#415916,#415926,.T.); +#415924 = VERTEX_POINT('',#415925); +#415925 = CARTESIAN_POINT('',(147.94,-129.085,0.)); +#415926 = LINE('',#415927,#415928); +#415927 = CARTESIAN_POINT('',(147.94,-129.085,0.)); +#415928 = VECTOR('',#415929,1.); +#415929 = DIRECTION('',(0.,0.,-1.)); +#415930 = ORIENTED_EDGE('',*,*,#415931,.F.); +#415931 = EDGE_CURVE('',#415892,#415924,#415932,.T.); +#415932 = LINE('',#415933,#415934); +#415933 = CARTESIAN_POINT('',(147.94,-128.715,0.)); +#415934 = VECTOR('',#415935,1.); +#415935 = DIRECTION('',(0.,-1.,0.)); +#415936 = PLANE('',#415937); +#415937 = AXIS2_PLACEMENT_3D('',#415938,#415939,#415940); +#415938 = CARTESIAN_POINT('',(147.94,-128.715,0.)); +#415939 = DIRECTION('',(-1.,-0.,-0.)); +#415940 = DIRECTION('',(0.,-1.,0.)); +#415941 = ADVANCED_FACE('',(#415942),#415969,.T.); +#415942 = FACE_BOUND('',#415943,.F.); +#415943 = EDGE_LOOP('',(#415944,#415945,#415954,#415962)); +#415944 = ORIENTED_EDGE('',*,*,#415923,.T.); +#415945 = ORIENTED_EDGE('',*,*,#415946,.T.); +#415946 = EDGE_CURVE('',#415916,#415947,#415949,.T.); +#415947 = VERTEX_POINT('',#415948); +#415948 = CARTESIAN_POINT('',(147.805,-129.22,-4.E-02)); +#415949 = CIRCLE('',#415950,0.135001418495); +#415950 = AXIS2_PLACEMENT_3D('',#415951,#415952,#415953); +#415951 = CARTESIAN_POINT('',(147.80499858151,-129.0849985815,-4.E-02)); +#415952 = DIRECTION('',(0.,0.,-1.)); +#415953 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#415954 = ORIENTED_EDGE('',*,*,#415955,.F.); +#415955 = EDGE_CURVE('',#415956,#415947,#415958,.T.); +#415956 = VERTEX_POINT('',#415957); +#415957 = CARTESIAN_POINT('',(147.805,-129.22,0.)); +#415958 = LINE('',#415959,#415960); +#415959 = CARTESIAN_POINT('',(147.805,-129.22,0.)); +#415960 = VECTOR('',#415961,1.); +#415961 = DIRECTION('',(0.,0.,-1.)); +#415962 = ORIENTED_EDGE('',*,*,#415963,.F.); +#415963 = EDGE_CURVE('',#415924,#415956,#415964,.T.); +#415964 = CIRCLE('',#415965,0.135001418495); +#415965 = AXIS2_PLACEMENT_3D('',#415966,#415967,#415968); +#415966 = CARTESIAN_POINT('',(147.80499858151,-129.0849985815,0.)); +#415967 = DIRECTION('',(0.,0.,-1.)); +#415968 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#415969 = CYLINDRICAL_SURFACE('',#415970,0.135001418495); +#415970 = AXIS2_PLACEMENT_3D('',#415971,#415972,#415973); +#415971 = CARTESIAN_POINT('',(147.80499858151,-129.0849985815,0.)); +#415972 = DIRECTION('',(-0.,-0.,1.)); +#415973 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#415974 = ADVANCED_FACE('',(#415975),#416000,.F.); +#415975 = FACE_BOUND('',#415976,.F.); +#415976 = EDGE_LOOP('',(#415977,#415978,#415986,#415994)); +#415977 = ORIENTED_EDGE('',*,*,#415955,.T.); +#415978 = ORIENTED_EDGE('',*,*,#415979,.T.); +#415979 = EDGE_CURVE('',#415947,#415980,#415982,.T.); +#415980 = VERTEX_POINT('',#415981); +#415981 = CARTESIAN_POINT('',(147.535,-129.22,-4.E-02)); +#415982 = LINE('',#415983,#415984); +#415983 = CARTESIAN_POINT('',(147.805,-129.22,-4.E-02)); +#415984 = VECTOR('',#415985,1.); +#415985 = DIRECTION('',(-1.,0.,0.)); +#415986 = ORIENTED_EDGE('',*,*,#415987,.F.); +#415987 = EDGE_CURVE('',#415988,#415980,#415990,.T.); +#415988 = VERTEX_POINT('',#415989); +#415989 = CARTESIAN_POINT('',(147.535,-129.22,0.)); +#415990 = LINE('',#415991,#415992); +#415991 = CARTESIAN_POINT('',(147.535,-129.22,0.)); +#415992 = VECTOR('',#415993,1.); +#415993 = DIRECTION('',(0.,0.,-1.)); +#415994 = ORIENTED_EDGE('',*,*,#415995,.F.); +#415995 = EDGE_CURVE('',#415956,#415988,#415996,.T.); +#415996 = LINE('',#415997,#415998); +#415997 = CARTESIAN_POINT('',(147.805,-129.22,0.)); +#415998 = VECTOR('',#415999,1.); +#415999 = DIRECTION('',(-1.,0.,0.)); +#416000 = PLANE('',#416001); +#416001 = AXIS2_PLACEMENT_3D('',#416002,#416003,#416004); +#416002 = CARTESIAN_POINT('',(147.805,-129.22,0.)); +#416003 = DIRECTION('',(0.,1.,0.)); +#416004 = DIRECTION('',(-1.,0.,0.)); +#416005 = ADVANCED_FACE('',(#416006),#416033,.T.); +#416006 = FACE_BOUND('',#416007,.F.); +#416007 = EDGE_LOOP('',(#416008,#416009,#416018,#416026)); +#416008 = ORIENTED_EDGE('',*,*,#415987,.T.); +#416009 = ORIENTED_EDGE('',*,*,#416010,.T.); +#416010 = EDGE_CURVE('',#415980,#416011,#416013,.T.); +#416011 = VERTEX_POINT('',#416012); +#416012 = CARTESIAN_POINT('',(147.4,-129.085,-4.E-02)); +#416013 = CIRCLE('',#416014,0.135001418495); +#416014 = AXIS2_PLACEMENT_3D('',#416015,#416016,#416017); +#416015 = CARTESIAN_POINT('',(147.53500141848,-129.0849985815,-4.E-02)); +#416016 = DIRECTION('',(0.,0.,-1.)); +#416017 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#416018 = ORIENTED_EDGE('',*,*,#416019,.F.); +#416019 = EDGE_CURVE('',#416020,#416011,#416022,.T.); +#416020 = VERTEX_POINT('',#416021); +#416021 = CARTESIAN_POINT('',(147.4,-129.085,0.)); +#416022 = LINE('',#416023,#416024); +#416023 = CARTESIAN_POINT('',(147.4,-129.085,0.)); +#416024 = VECTOR('',#416025,1.); +#416025 = DIRECTION('',(0.,0.,-1.)); +#416026 = ORIENTED_EDGE('',*,*,#416027,.F.); +#416027 = EDGE_CURVE('',#415988,#416020,#416028,.T.); +#416028 = CIRCLE('',#416029,0.135001418495); +#416029 = AXIS2_PLACEMENT_3D('',#416030,#416031,#416032); +#416030 = CARTESIAN_POINT('',(147.53500141848,-129.0849985815,0.)); +#416031 = DIRECTION('',(0.,0.,-1.)); +#416032 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#416033 = CYLINDRICAL_SURFACE('',#416034,0.135001418495); +#416034 = AXIS2_PLACEMENT_3D('',#416035,#416036,#416037); +#416035 = CARTESIAN_POINT('',(147.53500141848,-129.0849985815,0.)); +#416036 = DIRECTION('',(-0.,-0.,1.)); +#416037 = DIRECTION('',(-1.050720630576E-05,-0.999999999945,-0.)); +#416038 = ADVANCED_FACE('',(#416039),#416055,.F.); +#416039 = FACE_BOUND('',#416040,.F.); +#416040 = EDGE_LOOP('',(#416041,#416042,#416048,#416049)); +#416041 = ORIENTED_EDGE('',*,*,#416019,.T.); +#416042 = ORIENTED_EDGE('',*,*,#416043,.T.); +#416043 = EDGE_CURVE('',#416011,#415811,#416044,.T.); +#416044 = LINE('',#416045,#416046); +#416045 = CARTESIAN_POINT('',(147.4,-129.085,-4.E-02)); +#416046 = VECTOR('',#416047,1.); +#416047 = DIRECTION('',(0.,1.,0.)); +#416048 = ORIENTED_EDGE('',*,*,#415808,.F.); +#416049 = ORIENTED_EDGE('',*,*,#416050,.F.); +#416050 = EDGE_CURVE('',#416020,#415809,#416051,.T.); +#416051 = LINE('',#416052,#416053); +#416052 = CARTESIAN_POINT('',(147.4,-129.085,0.)); +#416053 = VECTOR('',#416054,1.); +#416054 = DIRECTION('',(0.,1.,0.)); +#416055 = PLANE('',#416056); +#416056 = AXIS2_PLACEMENT_3D('',#416057,#416058,#416059); +#416057 = CARTESIAN_POINT('',(147.4,-129.085,0.)); +#416058 = DIRECTION('',(1.,-0.,0.)); +#416059 = DIRECTION('',(0.,1.,0.)); +#416060 = ADVANCED_FACE('',(#416061),#416071,.F.); +#416061 = FACE_BOUND('',#416062,.F.); +#416062 = EDGE_LOOP('',(#416063,#416064,#416065,#416066,#416067,#416068, + #416069,#416070)); +#416063 = ORIENTED_EDGE('',*,*,#415835,.T.); +#416064 = ORIENTED_EDGE('',*,*,#415867,.T.); +#416065 = ORIENTED_EDGE('',*,*,#415899,.T.); +#416066 = ORIENTED_EDGE('',*,*,#415931,.T.); +#416067 = ORIENTED_EDGE('',*,*,#415963,.T.); +#416068 = ORIENTED_EDGE('',*,*,#415995,.T.); +#416069 = ORIENTED_EDGE('',*,*,#416027,.T.); +#416070 = ORIENTED_EDGE('',*,*,#416050,.T.); +#416071 = PLANE('',#416072); +#416072 = AXIS2_PLACEMENT_3D('',#416073,#416074,#416075); +#416073 = CARTESIAN_POINT('',(0.,0.,0.)); +#416074 = DIRECTION('',(-0.,-0.,-1.)); +#416075 = DIRECTION('',(-1.,0.,0.)); +#416076 = ADVANCED_FACE('',(#416077),#416087,.T.); +#416077 = FACE_BOUND('',#416078,.T.); +#416078 = EDGE_LOOP('',(#416079,#416080,#416081,#416082,#416083,#416084, + #416085,#416086)); +#416079 = ORIENTED_EDGE('',*,*,#415818,.T.); +#416080 = ORIENTED_EDGE('',*,*,#415851,.T.); +#416081 = ORIENTED_EDGE('',*,*,#415882,.T.); +#416082 = ORIENTED_EDGE('',*,*,#415915,.T.); +#416083 = ORIENTED_EDGE('',*,*,#415946,.T.); +#416084 = ORIENTED_EDGE('',*,*,#415979,.T.); +#416085 = ORIENTED_EDGE('',*,*,#416010,.T.); +#416086 = ORIENTED_EDGE('',*,*,#416043,.T.); +#416087 = PLANE('',#416088); +#416088 = AXIS2_PLACEMENT_3D('',#416089,#416090,#416091); +#416089 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#416090 = DIRECTION('',(-0.,-0.,-1.)); +#416091 = DIRECTION('',(-1.,0.,0.)); +#416092 = MANIFOLD_SOLID_BREP('',#416093); +#416093 = CLOSED_SHELL('',(#416094,#416136,#416167,#416200,#416231, + #416264,#416295,#416328,#416350,#416366)); +#416094 = ADVANCED_FACE('',(#416095),#416131,.T.); +#416095 = FACE_BOUND('',#416096,.F.); +#416096 = EDGE_LOOP('',(#416097,#416107,#416116,#416124)); +#416097 = ORIENTED_EDGE('',*,*,#416098,.T.); +#416098 = EDGE_CURVE('',#416099,#416101,#416103,.T.); +#416099 = VERTEX_POINT('',#416100); +#416100 = CARTESIAN_POINT('',(149.93,-131.525,0.)); +#416101 = VERTEX_POINT('',#416102); +#416102 = CARTESIAN_POINT('',(149.93,-131.525,-4.E-02)); +#416103 = LINE('',#416104,#416105); +#416104 = CARTESIAN_POINT('',(149.93,-131.525,0.)); +#416105 = VECTOR('',#416106,1.); +#416106 = DIRECTION('',(0.,0.,-1.)); +#416107 = ORIENTED_EDGE('',*,*,#416108,.T.); +#416108 = EDGE_CURVE('',#416101,#416109,#416111,.T.); +#416109 = VERTEX_POINT('',#416110); +#416110 = CARTESIAN_POINT('',(150.065,-131.39,-4.E-02)); +#416111 = CIRCLE('',#416112,0.135001418495); +#416112 = AXIS2_PLACEMENT_3D('',#416113,#416114,#416115); +#416113 = CARTESIAN_POINT('',(150.06500141848,-131.5250014184,-4.E-02)); +#416114 = DIRECTION('',(0.,0.,-1.)); +#416115 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#416116 = ORIENTED_EDGE('',*,*,#416117,.F.); +#416117 = EDGE_CURVE('',#416118,#416109,#416120,.T.); +#416118 = VERTEX_POINT('',#416119); +#416119 = CARTESIAN_POINT('',(150.065,-131.39,0.)); +#416120 = LINE('',#416121,#416122); +#416121 = CARTESIAN_POINT('',(150.065,-131.39,0.)); +#416122 = VECTOR('',#416123,1.); +#416123 = DIRECTION('',(0.,0.,-1.)); +#416124 = ORIENTED_EDGE('',*,*,#416125,.F.); +#416125 = EDGE_CURVE('',#416099,#416118,#416126,.T.); +#416126 = CIRCLE('',#416127,0.135001418495); +#416127 = AXIS2_PLACEMENT_3D('',#416128,#416129,#416130); +#416128 = CARTESIAN_POINT('',(150.06500141848,-131.5250014184,0.)); +#416129 = DIRECTION('',(0.,0.,-1.)); +#416130 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#416131 = CYLINDRICAL_SURFACE('',#416132,0.135001418495); +#416132 = AXIS2_PLACEMENT_3D('',#416133,#416134,#416135); +#416133 = CARTESIAN_POINT('',(150.06500141848,-131.5250014184,0.)); +#416134 = DIRECTION('',(-0.,-0.,1.)); +#416135 = DIRECTION('',(-0.999999999945,1.050720630576E-05,0.)); +#416136 = ADVANCED_FACE('',(#416137),#416162,.F.); +#416137 = FACE_BOUND('',#416138,.F.); +#416138 = EDGE_LOOP('',(#416139,#416140,#416148,#416156)); +#416139 = ORIENTED_EDGE('',*,*,#416117,.T.); +#416140 = ORIENTED_EDGE('',*,*,#416141,.T.); +#416141 = EDGE_CURVE('',#416109,#416142,#416144,.T.); +#416142 = VERTEX_POINT('',#416143); +#416143 = CARTESIAN_POINT('',(150.435,-131.39,-4.E-02)); +#416144 = LINE('',#416145,#416146); +#416145 = CARTESIAN_POINT('',(150.065,-131.39,-4.E-02)); +#416146 = VECTOR('',#416147,1.); +#416147 = DIRECTION('',(1.,0.,0.)); +#416148 = ORIENTED_EDGE('',*,*,#416149,.F.); +#416149 = EDGE_CURVE('',#416150,#416142,#416152,.T.); +#416150 = VERTEX_POINT('',#416151); +#416151 = CARTESIAN_POINT('',(150.435,-131.39,0.)); +#416152 = LINE('',#416153,#416154); +#416153 = CARTESIAN_POINT('',(150.435,-131.39,0.)); +#416154 = VECTOR('',#416155,1.); +#416155 = DIRECTION('',(0.,0.,-1.)); +#416156 = ORIENTED_EDGE('',*,*,#416157,.F.); +#416157 = EDGE_CURVE('',#416118,#416150,#416158,.T.); +#416158 = LINE('',#416159,#416160); +#416159 = CARTESIAN_POINT('',(150.065,-131.39,0.)); +#416160 = VECTOR('',#416161,1.); +#416161 = DIRECTION('',(1.,0.,0.)); +#416162 = PLANE('',#416163); +#416163 = AXIS2_PLACEMENT_3D('',#416164,#416165,#416166); +#416164 = CARTESIAN_POINT('',(150.065,-131.39,0.)); +#416165 = DIRECTION('',(0.,-1.,0.)); +#416166 = DIRECTION('',(1.,0.,0.)); +#416167 = ADVANCED_FACE('',(#416168),#416195,.T.); +#416168 = FACE_BOUND('',#416169,.F.); +#416169 = EDGE_LOOP('',(#416170,#416171,#416180,#416188)); +#416170 = ORIENTED_EDGE('',*,*,#416149,.T.); +#416171 = ORIENTED_EDGE('',*,*,#416172,.T.); +#416172 = EDGE_CURVE('',#416142,#416173,#416175,.T.); +#416173 = VERTEX_POINT('',#416174); +#416174 = CARTESIAN_POINT('',(150.57,-131.525,-4.E-02)); +#416175 = CIRCLE('',#416176,0.135001418495); +#416176 = AXIS2_PLACEMENT_3D('',#416177,#416178,#416179); +#416177 = CARTESIAN_POINT('',(150.43499858151,-131.5250014184,-4.E-02)); +#416178 = DIRECTION('',(0.,0.,-1.)); +#416179 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#416180 = ORIENTED_EDGE('',*,*,#416181,.F.); +#416181 = EDGE_CURVE('',#416182,#416173,#416184,.T.); +#416182 = VERTEX_POINT('',#416183); +#416183 = CARTESIAN_POINT('',(150.57,-131.525,0.)); +#416184 = LINE('',#416185,#416186); +#416185 = CARTESIAN_POINT('',(150.57,-131.525,0.)); +#416186 = VECTOR('',#416187,1.); +#416187 = DIRECTION('',(0.,0.,-1.)); +#416188 = ORIENTED_EDGE('',*,*,#416189,.F.); +#416189 = EDGE_CURVE('',#416150,#416182,#416190,.T.); +#416190 = CIRCLE('',#416191,0.135001418495); +#416191 = AXIS2_PLACEMENT_3D('',#416192,#416193,#416194); +#416192 = CARTESIAN_POINT('',(150.43499858151,-131.5250014184,0.)); +#416193 = DIRECTION('',(0.,0.,-1.)); +#416194 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#416195 = CYLINDRICAL_SURFACE('',#416196,0.135001418495); +#416196 = AXIS2_PLACEMENT_3D('',#416197,#416198,#416199); +#416197 = CARTESIAN_POINT('',(150.43499858151,-131.5250014184,0.)); +#416198 = DIRECTION('',(-0.,-0.,1.)); +#416199 = DIRECTION('',(1.050720672682E-05,0.999999999945,0.)); +#416200 = ADVANCED_FACE('',(#416201),#416226,.F.); +#416201 = FACE_BOUND('',#416202,.F.); +#416202 = EDGE_LOOP('',(#416203,#416204,#416212,#416220)); +#416203 = ORIENTED_EDGE('',*,*,#416181,.T.); +#416204 = ORIENTED_EDGE('',*,*,#416205,.T.); +#416205 = EDGE_CURVE('',#416173,#416206,#416208,.T.); +#416206 = VERTEX_POINT('',#416207); +#416207 = CARTESIAN_POINT('',(150.57,-131.795,-4.E-02)); +#416208 = LINE('',#416209,#416210); +#416209 = CARTESIAN_POINT('',(150.57,-131.525,-4.E-02)); +#416210 = VECTOR('',#416211,1.); +#416211 = DIRECTION('',(0.,-1.,0.)); +#416212 = ORIENTED_EDGE('',*,*,#416213,.F.); +#416213 = EDGE_CURVE('',#416214,#416206,#416216,.T.); +#416214 = VERTEX_POINT('',#416215); +#416215 = CARTESIAN_POINT('',(150.57,-131.795,0.)); +#416216 = LINE('',#416217,#416218); +#416217 = CARTESIAN_POINT('',(150.57,-131.795,0.)); +#416218 = VECTOR('',#416219,1.); +#416219 = DIRECTION('',(0.,0.,-1.)); +#416220 = ORIENTED_EDGE('',*,*,#416221,.F.); +#416221 = EDGE_CURVE('',#416182,#416214,#416222,.T.); +#416222 = LINE('',#416223,#416224); +#416223 = CARTESIAN_POINT('',(150.57,-131.525,0.)); +#416224 = VECTOR('',#416225,1.); +#416225 = DIRECTION('',(0.,-1.,0.)); +#416226 = PLANE('',#416227); +#416227 = AXIS2_PLACEMENT_3D('',#416228,#416229,#416230); +#416228 = CARTESIAN_POINT('',(150.57,-131.525,0.)); +#416229 = DIRECTION('',(-1.,-0.,-0.)); +#416230 = DIRECTION('',(0.,-1.,0.)); +#416231 = ADVANCED_FACE('',(#416232),#416259,.T.); +#416232 = FACE_BOUND('',#416233,.F.); +#416233 = EDGE_LOOP('',(#416234,#416235,#416244,#416252)); +#416234 = ORIENTED_EDGE('',*,*,#416213,.T.); +#416235 = ORIENTED_EDGE('',*,*,#416236,.T.); +#416236 = EDGE_CURVE('',#416206,#416237,#416239,.T.); +#416237 = VERTEX_POINT('',#416238); +#416238 = CARTESIAN_POINT('',(150.435,-131.93,-4.E-02)); +#416239 = CIRCLE('',#416240,0.135001418495); +#416240 = AXIS2_PLACEMENT_3D('',#416241,#416242,#416243); +#416241 = CARTESIAN_POINT('',(150.43499858151,-131.7949985815,-4.E-02)); +#416242 = DIRECTION('',(0.,0.,-1.)); +#416243 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#416244 = ORIENTED_EDGE('',*,*,#416245,.F.); +#416245 = EDGE_CURVE('',#416246,#416237,#416248,.T.); +#416246 = VERTEX_POINT('',#416247); +#416247 = CARTESIAN_POINT('',(150.435,-131.93,0.)); +#416248 = LINE('',#416249,#416250); +#416249 = CARTESIAN_POINT('',(150.435,-131.93,0.)); +#416250 = VECTOR('',#416251,1.); +#416251 = DIRECTION('',(0.,0.,-1.)); +#416252 = ORIENTED_EDGE('',*,*,#416253,.F.); +#416253 = EDGE_CURVE('',#416214,#416246,#416254,.T.); +#416254 = CIRCLE('',#416255,0.135001418495); +#416255 = AXIS2_PLACEMENT_3D('',#416256,#416257,#416258); +#416256 = CARTESIAN_POINT('',(150.43499858151,-131.7949985815,0.)); +#416257 = DIRECTION('',(0.,0.,-1.)); +#416258 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#416259 = CYLINDRICAL_SURFACE('',#416260,0.135001418495); +#416260 = AXIS2_PLACEMENT_3D('',#416261,#416262,#416263); +#416261 = CARTESIAN_POINT('',(150.43499858151,-131.7949985815,0.)); +#416262 = DIRECTION('',(-0.,-0.,1.)); +#416263 = DIRECTION('',(0.999999999945,-1.050720630576E-05,0.)); +#416264 = ADVANCED_FACE('',(#416265),#416290,.F.); +#416265 = FACE_BOUND('',#416266,.F.); +#416266 = EDGE_LOOP('',(#416267,#416268,#416276,#416284)); +#416267 = ORIENTED_EDGE('',*,*,#416245,.T.); +#416268 = ORIENTED_EDGE('',*,*,#416269,.T.); +#416269 = EDGE_CURVE('',#416237,#416270,#416272,.T.); +#416270 = VERTEX_POINT('',#416271); +#416271 = CARTESIAN_POINT('',(150.065,-131.93,-4.E-02)); +#416272 = LINE('',#416273,#416274); +#416273 = CARTESIAN_POINT('',(150.435,-131.93,-4.E-02)); +#416274 = VECTOR('',#416275,1.); +#416275 = DIRECTION('',(-1.,0.,0.)); +#416276 = ORIENTED_EDGE('',*,*,#416277,.F.); +#416277 = EDGE_CURVE('',#416278,#416270,#416280,.T.); +#416278 = VERTEX_POINT('',#416279); +#416279 = CARTESIAN_POINT('',(150.065,-131.93,0.)); +#416280 = LINE('',#416281,#416282); +#416281 = CARTESIAN_POINT('',(150.065,-131.93,0.)); +#416282 = VECTOR('',#416283,1.); +#416283 = DIRECTION('',(0.,0.,-1.)); +#416284 = ORIENTED_EDGE('',*,*,#416285,.F.); +#416285 = EDGE_CURVE('',#416246,#416278,#416286,.T.); +#416286 = LINE('',#416287,#416288); +#416287 = CARTESIAN_POINT('',(150.435,-131.93,0.)); +#416288 = VECTOR('',#416289,1.); +#416289 = DIRECTION('',(-1.,0.,0.)); +#416290 = PLANE('',#416291); +#416291 = AXIS2_PLACEMENT_3D('',#416292,#416293,#416294); +#416292 = CARTESIAN_POINT('',(150.435,-131.93,0.)); +#416293 = DIRECTION('',(0.,1.,0.)); +#416294 = DIRECTION('',(-1.,0.,0.)); +#416295 = ADVANCED_FACE('',(#416296),#416323,.T.); +#416296 = FACE_BOUND('',#416297,.F.); +#416297 = EDGE_LOOP('',(#416298,#416299,#416308,#416316)); +#416298 = ORIENTED_EDGE('',*,*,#416277,.T.); +#416299 = ORIENTED_EDGE('',*,*,#416300,.T.); +#416300 = EDGE_CURVE('',#416270,#416301,#416303,.T.); +#416301 = VERTEX_POINT('',#416302); +#416302 = CARTESIAN_POINT('',(149.93,-131.795,-4.E-02)); +#416303 = CIRCLE('',#416304,0.135001418495); +#416304 = AXIS2_PLACEMENT_3D('',#416305,#416306,#416307); +#416305 = CARTESIAN_POINT('',(150.06500141848,-131.7949985815,-4.E-02)); +#416306 = DIRECTION('',(0.,0.,-1.)); +#416307 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416308 = ORIENTED_EDGE('',*,*,#416309,.F.); +#416309 = EDGE_CURVE('',#416310,#416301,#416312,.T.); +#416310 = VERTEX_POINT('',#416311); +#416311 = CARTESIAN_POINT('',(149.93,-131.795,0.)); +#416312 = LINE('',#416313,#416314); +#416313 = CARTESIAN_POINT('',(149.93,-131.795,0.)); +#416314 = VECTOR('',#416315,1.); +#416315 = DIRECTION('',(0.,0.,-1.)); +#416316 = ORIENTED_EDGE('',*,*,#416317,.F.); +#416317 = EDGE_CURVE('',#416278,#416310,#416318,.T.); +#416318 = CIRCLE('',#416319,0.135001418495); +#416319 = AXIS2_PLACEMENT_3D('',#416320,#416321,#416322); +#416320 = CARTESIAN_POINT('',(150.06500141848,-131.7949985815,0.)); +#416321 = DIRECTION('',(0.,0.,-1.)); +#416322 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416323 = CYLINDRICAL_SURFACE('',#416324,0.135001418495); +#416324 = AXIS2_PLACEMENT_3D('',#416325,#416326,#416327); +#416325 = CARTESIAN_POINT('',(150.06500141848,-131.7949985815,0.)); +#416326 = DIRECTION('',(-0.,-0.,1.)); +#416327 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416328 = ADVANCED_FACE('',(#416329),#416345,.F.); +#416329 = FACE_BOUND('',#416330,.F.); +#416330 = EDGE_LOOP('',(#416331,#416332,#416338,#416339)); +#416331 = ORIENTED_EDGE('',*,*,#416309,.T.); +#416332 = ORIENTED_EDGE('',*,*,#416333,.T.); +#416333 = EDGE_CURVE('',#416301,#416101,#416334,.T.); +#416334 = LINE('',#416335,#416336); +#416335 = CARTESIAN_POINT('',(149.93,-131.795,-4.E-02)); +#416336 = VECTOR('',#416337,1.); +#416337 = DIRECTION('',(0.,1.,0.)); +#416338 = ORIENTED_EDGE('',*,*,#416098,.F.); +#416339 = ORIENTED_EDGE('',*,*,#416340,.F.); +#416340 = EDGE_CURVE('',#416310,#416099,#416341,.T.); +#416341 = LINE('',#416342,#416343); +#416342 = CARTESIAN_POINT('',(149.93,-131.795,0.)); +#416343 = VECTOR('',#416344,1.); +#416344 = DIRECTION('',(0.,1.,0.)); +#416345 = PLANE('',#416346); +#416346 = AXIS2_PLACEMENT_3D('',#416347,#416348,#416349); +#416347 = CARTESIAN_POINT('',(149.93,-131.795,0.)); +#416348 = DIRECTION('',(1.,-0.,0.)); +#416349 = DIRECTION('',(0.,1.,0.)); +#416350 = ADVANCED_FACE('',(#416351),#416361,.F.); +#416351 = FACE_BOUND('',#416352,.F.); +#416352 = EDGE_LOOP('',(#416353,#416354,#416355,#416356,#416357,#416358, + #416359,#416360)); +#416353 = ORIENTED_EDGE('',*,*,#416125,.T.); +#416354 = ORIENTED_EDGE('',*,*,#416157,.T.); +#416355 = ORIENTED_EDGE('',*,*,#416189,.T.); +#416356 = ORIENTED_EDGE('',*,*,#416221,.T.); +#416357 = ORIENTED_EDGE('',*,*,#416253,.T.); +#416358 = ORIENTED_EDGE('',*,*,#416285,.T.); +#416359 = ORIENTED_EDGE('',*,*,#416317,.T.); +#416360 = ORIENTED_EDGE('',*,*,#416340,.T.); +#416361 = PLANE('',#416362); +#416362 = AXIS2_PLACEMENT_3D('',#416363,#416364,#416365); +#416363 = CARTESIAN_POINT('',(0.,0.,0.)); +#416364 = DIRECTION('',(-0.,-0.,-1.)); +#416365 = DIRECTION('',(-1.,0.,0.)); +#416366 = ADVANCED_FACE('',(#416367),#416377,.T.); +#416367 = FACE_BOUND('',#416368,.T.); +#416368 = EDGE_LOOP('',(#416369,#416370,#416371,#416372,#416373,#416374, + #416375,#416376)); +#416369 = ORIENTED_EDGE('',*,*,#416108,.T.); +#416370 = ORIENTED_EDGE('',*,*,#416141,.T.); +#416371 = ORIENTED_EDGE('',*,*,#416172,.T.); +#416372 = ORIENTED_EDGE('',*,*,#416205,.T.); +#416373 = ORIENTED_EDGE('',*,*,#416236,.T.); +#416374 = ORIENTED_EDGE('',*,*,#416269,.T.); +#416375 = ORIENTED_EDGE('',*,*,#416300,.T.); +#416376 = ORIENTED_EDGE('',*,*,#416333,.T.); +#416377 = PLANE('',#416378); +#416378 = AXIS2_PLACEMENT_3D('',#416379,#416380,#416381); +#416379 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#416380 = DIRECTION('',(-0.,-0.,-1.)); +#416381 = DIRECTION('',(-1.,0.,0.)); +#416382 = MANIFOLD_SOLID_BREP('',#416383); +#416383 = CLOSED_SHELL('',(#416384,#416426,#416457,#416490,#416521, + #416554,#416585,#416618,#416640,#416656)); +#416384 = ADVANCED_FACE('',(#416385),#416421,.T.); +#416385 = FACE_BOUND('',#416386,.F.); +#416386 = EDGE_LOOP('',(#416387,#416397,#416406,#416414)); +#416387 = ORIENTED_EDGE('',*,*,#416388,.T.); +#416388 = EDGE_CURVE('',#416389,#416391,#416393,.T.); +#416389 = VERTEX_POINT('',#416390); +#416390 = CARTESIAN_POINT('',(148.25,-114.315,0.)); +#416391 = VERTEX_POINT('',#416392); +#416392 = CARTESIAN_POINT('',(148.25,-114.315,-4.E-02)); +#416393 = LINE('',#416394,#416395); +#416394 = CARTESIAN_POINT('',(148.25,-114.315,0.)); +#416395 = VECTOR('',#416396,1.); +#416396 = DIRECTION('',(0.,0.,-1.)); +#416397 = ORIENTED_EDGE('',*,*,#416398,.T.); +#416398 = EDGE_CURVE('',#416391,#416399,#416401,.T.); +#416399 = VERTEX_POINT('',#416400); +#416400 = CARTESIAN_POINT('',(148.385,-114.18,-4.E-02)); +#416401 = CIRCLE('',#416402,0.135001418495); +#416402 = AXIS2_PLACEMENT_3D('',#416403,#416404,#416405); +#416403 = CARTESIAN_POINT('',(148.38500141848,-114.3150014184,-4.E-02)); +#416404 = DIRECTION('',(0.,0.,-1.)); +#416405 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#416406 = ORIENTED_EDGE('',*,*,#416407,.F.); +#416407 = EDGE_CURVE('',#416408,#416399,#416410,.T.); +#416408 = VERTEX_POINT('',#416409); +#416409 = CARTESIAN_POINT('',(148.385,-114.18,0.)); +#416410 = LINE('',#416411,#416412); +#416411 = CARTESIAN_POINT('',(148.385,-114.18,0.)); +#416412 = VECTOR('',#416413,1.); +#416413 = DIRECTION('',(0.,0.,-1.)); +#416414 = ORIENTED_EDGE('',*,*,#416415,.F.); +#416415 = EDGE_CURVE('',#416389,#416408,#416416,.T.); +#416416 = CIRCLE('',#416417,0.135001418495); +#416417 = AXIS2_PLACEMENT_3D('',#416418,#416419,#416420); +#416418 = CARTESIAN_POINT('',(148.38500141848,-114.3150014184,0.)); +#416419 = DIRECTION('',(0.,0.,-1.)); +#416420 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#416421 = CYLINDRICAL_SURFACE('',#416422,0.135001418495); +#416422 = AXIS2_PLACEMENT_3D('',#416423,#416424,#416425); +#416423 = CARTESIAN_POINT('',(148.38500141848,-114.3150014184,0.)); +#416424 = DIRECTION('',(-0.,-0.,1.)); +#416425 = DIRECTION('',(-0.999999999945,1.050720672682E-05,0.)); +#416426 = ADVANCED_FACE('',(#416427),#416452,.F.); +#416427 = FACE_BOUND('',#416428,.F.); +#416428 = EDGE_LOOP('',(#416429,#416430,#416438,#416446)); +#416429 = ORIENTED_EDGE('',*,*,#416407,.T.); +#416430 = ORIENTED_EDGE('',*,*,#416431,.T.); +#416431 = EDGE_CURVE('',#416399,#416432,#416434,.T.); +#416432 = VERTEX_POINT('',#416433); +#416433 = CARTESIAN_POINT('',(148.655,-114.18,-4.E-02)); +#416434 = LINE('',#416435,#416436); +#416435 = CARTESIAN_POINT('',(148.385,-114.18,-4.E-02)); +#416436 = VECTOR('',#416437,1.); +#416437 = DIRECTION('',(1.,0.,0.)); +#416438 = ORIENTED_EDGE('',*,*,#416439,.F.); +#416439 = EDGE_CURVE('',#416440,#416432,#416442,.T.); +#416440 = VERTEX_POINT('',#416441); +#416441 = CARTESIAN_POINT('',(148.655,-114.18,0.)); +#416442 = LINE('',#416443,#416444); +#416443 = CARTESIAN_POINT('',(148.655,-114.18,0.)); +#416444 = VECTOR('',#416445,1.); +#416445 = DIRECTION('',(0.,0.,-1.)); +#416446 = ORIENTED_EDGE('',*,*,#416447,.F.); +#416447 = EDGE_CURVE('',#416408,#416440,#416448,.T.); +#416448 = LINE('',#416449,#416450); +#416449 = CARTESIAN_POINT('',(148.385,-114.18,0.)); +#416450 = VECTOR('',#416451,1.); +#416451 = DIRECTION('',(1.,0.,0.)); +#416452 = PLANE('',#416453); +#416453 = AXIS2_PLACEMENT_3D('',#416454,#416455,#416456); +#416454 = CARTESIAN_POINT('',(148.385,-114.18,0.)); +#416455 = DIRECTION('',(0.,-1.,0.)); +#416456 = DIRECTION('',(1.,0.,0.)); +#416457 = ADVANCED_FACE('',(#416458),#416485,.T.); +#416458 = FACE_BOUND('',#416459,.F.); +#416459 = EDGE_LOOP('',(#416460,#416461,#416470,#416478)); +#416460 = ORIENTED_EDGE('',*,*,#416439,.T.); +#416461 = ORIENTED_EDGE('',*,*,#416462,.T.); +#416462 = EDGE_CURVE('',#416432,#416463,#416465,.T.); +#416463 = VERTEX_POINT('',#416464); +#416464 = CARTESIAN_POINT('',(148.79,-114.315,-4.E-02)); +#416465 = CIRCLE('',#416466,0.135001418495); +#416466 = AXIS2_PLACEMENT_3D('',#416467,#416468,#416469); +#416467 = CARTESIAN_POINT('',(148.65499858151,-114.3150014184,-4.E-02)); +#416468 = DIRECTION('',(0.,0.,-1.)); +#416469 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#416470 = ORIENTED_EDGE('',*,*,#416471,.F.); +#416471 = EDGE_CURVE('',#416472,#416463,#416474,.T.); +#416472 = VERTEX_POINT('',#416473); +#416473 = CARTESIAN_POINT('',(148.79,-114.315,0.)); +#416474 = LINE('',#416475,#416476); +#416475 = CARTESIAN_POINT('',(148.79,-114.315,0.)); +#416476 = VECTOR('',#416477,1.); +#416477 = DIRECTION('',(0.,0.,-1.)); +#416478 = ORIENTED_EDGE('',*,*,#416479,.F.); +#416479 = EDGE_CURVE('',#416440,#416472,#416480,.T.); +#416480 = CIRCLE('',#416481,0.135001418495); +#416481 = AXIS2_PLACEMENT_3D('',#416482,#416483,#416484); +#416482 = CARTESIAN_POINT('',(148.65499858151,-114.3150014184,0.)); +#416483 = DIRECTION('',(0.,0.,-1.)); +#416484 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#416485 = CYLINDRICAL_SURFACE('',#416486,0.135001418495); +#416486 = AXIS2_PLACEMENT_3D('',#416487,#416488,#416489); +#416487 = CARTESIAN_POINT('',(148.65499858151,-114.3150014184,0.)); +#416488 = DIRECTION('',(-0.,-0.,1.)); +#416489 = DIRECTION('',(1.050720630576E-05,0.999999999945,0.)); +#416490 = ADVANCED_FACE('',(#416491),#416516,.F.); +#416491 = FACE_BOUND('',#416492,.F.); +#416492 = EDGE_LOOP('',(#416493,#416494,#416502,#416510)); +#416493 = ORIENTED_EDGE('',*,*,#416471,.T.); +#416494 = ORIENTED_EDGE('',*,*,#416495,.T.); +#416495 = EDGE_CURVE('',#416463,#416496,#416498,.T.); +#416496 = VERTEX_POINT('',#416497); +#416497 = CARTESIAN_POINT('',(148.79,-114.685,-4.E-02)); +#416498 = LINE('',#416499,#416500); +#416499 = CARTESIAN_POINT('',(148.79,-114.315,-4.E-02)); +#416500 = VECTOR('',#416501,1.); +#416501 = DIRECTION('',(0.,-1.,0.)); +#416502 = ORIENTED_EDGE('',*,*,#416503,.F.); +#416503 = EDGE_CURVE('',#416504,#416496,#416506,.T.); +#416504 = VERTEX_POINT('',#416505); +#416505 = CARTESIAN_POINT('',(148.79,-114.685,0.)); +#416506 = LINE('',#416507,#416508); +#416507 = CARTESIAN_POINT('',(148.79,-114.685,0.)); +#416508 = VECTOR('',#416509,1.); +#416509 = DIRECTION('',(0.,0.,-1.)); +#416510 = ORIENTED_EDGE('',*,*,#416511,.F.); +#416511 = EDGE_CURVE('',#416472,#416504,#416512,.T.); +#416512 = LINE('',#416513,#416514); +#416513 = CARTESIAN_POINT('',(148.79,-114.315,0.)); +#416514 = VECTOR('',#416515,1.); +#416515 = DIRECTION('',(0.,-1.,0.)); +#416516 = PLANE('',#416517); +#416517 = AXIS2_PLACEMENT_3D('',#416518,#416519,#416520); +#416518 = CARTESIAN_POINT('',(148.79,-114.315,0.)); +#416519 = DIRECTION('',(-1.,-0.,-0.)); +#416520 = DIRECTION('',(0.,-1.,0.)); +#416521 = ADVANCED_FACE('',(#416522),#416549,.T.); +#416522 = FACE_BOUND('',#416523,.F.); +#416523 = EDGE_LOOP('',(#416524,#416525,#416534,#416542)); +#416524 = ORIENTED_EDGE('',*,*,#416503,.T.); +#416525 = ORIENTED_EDGE('',*,*,#416526,.T.); +#416526 = EDGE_CURVE('',#416496,#416527,#416529,.T.); +#416527 = VERTEX_POINT('',#416528); +#416528 = CARTESIAN_POINT('',(148.655,-114.82,-4.E-02)); +#416529 = CIRCLE('',#416530,0.135001418495); +#416530 = AXIS2_PLACEMENT_3D('',#416531,#416532,#416533); +#416531 = CARTESIAN_POINT('',(148.65499858151,-114.6849985815,-4.E-02)); +#416532 = DIRECTION('',(0.,0.,-1.)); +#416533 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#416534 = ORIENTED_EDGE('',*,*,#416535,.F.); +#416535 = EDGE_CURVE('',#416536,#416527,#416538,.T.); +#416536 = VERTEX_POINT('',#416537); +#416537 = CARTESIAN_POINT('',(148.655,-114.82,0.)); +#416538 = LINE('',#416539,#416540); +#416539 = CARTESIAN_POINT('',(148.655,-114.82,0.)); +#416540 = VECTOR('',#416541,1.); +#416541 = DIRECTION('',(0.,0.,-1.)); +#416542 = ORIENTED_EDGE('',*,*,#416543,.F.); +#416543 = EDGE_CURVE('',#416504,#416536,#416544,.T.); +#416544 = CIRCLE('',#416545,0.135001418495); +#416545 = AXIS2_PLACEMENT_3D('',#416546,#416547,#416548); +#416546 = CARTESIAN_POINT('',(148.65499858151,-114.6849985815,0.)); +#416547 = DIRECTION('',(0.,0.,-1.)); +#416548 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#416549 = CYLINDRICAL_SURFACE('',#416550,0.135001418495); +#416550 = AXIS2_PLACEMENT_3D('',#416551,#416552,#416553); +#416551 = CARTESIAN_POINT('',(148.65499858151,-114.6849985815,0.)); +#416552 = DIRECTION('',(-0.,-0.,1.)); +#416553 = DIRECTION('',(0.999999999945,-1.050720641103E-05,0.)); +#416554 = ADVANCED_FACE('',(#416555),#416580,.F.); +#416555 = FACE_BOUND('',#416556,.F.); +#416556 = EDGE_LOOP('',(#416557,#416558,#416566,#416574)); +#416557 = ORIENTED_EDGE('',*,*,#416535,.T.); +#416558 = ORIENTED_EDGE('',*,*,#416559,.T.); +#416559 = EDGE_CURVE('',#416527,#416560,#416562,.T.); +#416560 = VERTEX_POINT('',#416561); +#416561 = CARTESIAN_POINT('',(148.385,-114.82,-4.E-02)); +#416562 = LINE('',#416563,#416564); +#416563 = CARTESIAN_POINT('',(148.655,-114.82,-4.E-02)); +#416564 = VECTOR('',#416565,1.); +#416565 = DIRECTION('',(-1.,0.,0.)); +#416566 = ORIENTED_EDGE('',*,*,#416567,.F.); +#416567 = EDGE_CURVE('',#416568,#416560,#416570,.T.); +#416568 = VERTEX_POINT('',#416569); +#416569 = CARTESIAN_POINT('',(148.385,-114.82,0.)); +#416570 = LINE('',#416571,#416572); +#416571 = CARTESIAN_POINT('',(148.385,-114.82,0.)); +#416572 = VECTOR('',#416573,1.); +#416573 = DIRECTION('',(0.,0.,-1.)); +#416574 = ORIENTED_EDGE('',*,*,#416575,.F.); +#416575 = EDGE_CURVE('',#416536,#416568,#416576,.T.); +#416576 = LINE('',#416577,#416578); +#416577 = CARTESIAN_POINT('',(148.655,-114.82,0.)); +#416578 = VECTOR('',#416579,1.); +#416579 = DIRECTION('',(-1.,0.,0.)); +#416580 = PLANE('',#416581); +#416581 = AXIS2_PLACEMENT_3D('',#416582,#416583,#416584); +#416582 = CARTESIAN_POINT('',(148.655,-114.82,0.)); +#416583 = DIRECTION('',(0.,1.,0.)); +#416584 = DIRECTION('',(-1.,0.,0.)); +#416585 = ADVANCED_FACE('',(#416586),#416613,.T.); +#416586 = FACE_BOUND('',#416587,.F.); +#416587 = EDGE_LOOP('',(#416588,#416589,#416598,#416606)); +#416588 = ORIENTED_EDGE('',*,*,#416567,.T.); +#416589 = ORIENTED_EDGE('',*,*,#416590,.T.); +#416590 = EDGE_CURVE('',#416560,#416591,#416593,.T.); +#416591 = VERTEX_POINT('',#416592); +#416592 = CARTESIAN_POINT('',(148.25,-114.685,-4.E-02)); +#416593 = CIRCLE('',#416594,0.135001418495); +#416594 = AXIS2_PLACEMENT_3D('',#416595,#416596,#416597); +#416595 = CARTESIAN_POINT('',(148.38500141848,-114.6849985815,-4.E-02)); +#416596 = DIRECTION('',(0.,0.,-1.)); +#416597 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416598 = ORIENTED_EDGE('',*,*,#416599,.F.); +#416599 = EDGE_CURVE('',#416600,#416591,#416602,.T.); +#416600 = VERTEX_POINT('',#416601); +#416601 = CARTESIAN_POINT('',(148.25,-114.685,0.)); +#416602 = LINE('',#416603,#416604); +#416603 = CARTESIAN_POINT('',(148.25,-114.685,0.)); +#416604 = VECTOR('',#416605,1.); +#416605 = DIRECTION('',(0.,0.,-1.)); +#416606 = ORIENTED_EDGE('',*,*,#416607,.F.); +#416607 = EDGE_CURVE('',#416568,#416600,#416608,.T.); +#416608 = CIRCLE('',#416609,0.135001418495); +#416609 = AXIS2_PLACEMENT_3D('',#416610,#416611,#416612); +#416610 = CARTESIAN_POINT('',(148.38500141848,-114.6849985815,0.)); +#416611 = DIRECTION('',(0.,0.,-1.)); +#416612 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416613 = CYLINDRICAL_SURFACE('',#416614,0.135001418495); +#416614 = AXIS2_PLACEMENT_3D('',#416615,#416616,#416617); +#416615 = CARTESIAN_POINT('',(148.38500141848,-114.6849985815,0.)); +#416616 = DIRECTION('',(-0.,-0.,1.)); +#416617 = DIRECTION('',(-1.050720672682E-05,-0.999999999945,-0.)); +#416618 = ADVANCED_FACE('',(#416619),#416635,.F.); +#416619 = FACE_BOUND('',#416620,.F.); +#416620 = EDGE_LOOP('',(#416621,#416622,#416628,#416629)); +#416621 = ORIENTED_EDGE('',*,*,#416599,.T.); +#416622 = ORIENTED_EDGE('',*,*,#416623,.T.); +#416623 = EDGE_CURVE('',#416591,#416391,#416624,.T.); +#416624 = LINE('',#416625,#416626); +#416625 = CARTESIAN_POINT('',(148.25,-114.685,-4.E-02)); +#416626 = VECTOR('',#416627,1.); +#416627 = DIRECTION('',(0.,1.,0.)); +#416628 = ORIENTED_EDGE('',*,*,#416388,.F.); +#416629 = ORIENTED_EDGE('',*,*,#416630,.F.); +#416630 = EDGE_CURVE('',#416600,#416389,#416631,.T.); +#416631 = LINE('',#416632,#416633); +#416632 = CARTESIAN_POINT('',(148.25,-114.685,0.)); +#416633 = VECTOR('',#416634,1.); +#416634 = DIRECTION('',(0.,1.,0.)); +#416635 = PLANE('',#416636); +#416636 = AXIS2_PLACEMENT_3D('',#416637,#416638,#416639); +#416637 = CARTESIAN_POINT('',(148.25,-114.685,0.)); +#416638 = DIRECTION('',(1.,-0.,0.)); +#416639 = DIRECTION('',(0.,1.,0.)); +#416640 = ADVANCED_FACE('',(#416641),#416651,.F.); +#416641 = FACE_BOUND('',#416642,.F.); +#416642 = EDGE_LOOP('',(#416643,#416644,#416645,#416646,#416647,#416648, + #416649,#416650)); +#416643 = ORIENTED_EDGE('',*,*,#416415,.T.); +#416644 = ORIENTED_EDGE('',*,*,#416447,.T.); +#416645 = ORIENTED_EDGE('',*,*,#416479,.T.); +#416646 = ORIENTED_EDGE('',*,*,#416511,.T.); +#416647 = ORIENTED_EDGE('',*,*,#416543,.T.); +#416648 = ORIENTED_EDGE('',*,*,#416575,.T.); +#416649 = ORIENTED_EDGE('',*,*,#416607,.T.); +#416650 = ORIENTED_EDGE('',*,*,#416630,.T.); +#416651 = PLANE('',#416652); +#416652 = AXIS2_PLACEMENT_3D('',#416653,#416654,#416655); +#416653 = CARTESIAN_POINT('',(0.,0.,0.)); +#416654 = DIRECTION('',(-0.,-0.,-1.)); +#416655 = DIRECTION('',(-1.,0.,0.)); +#416656 = ADVANCED_FACE('',(#416657),#416667,.T.); +#416657 = FACE_BOUND('',#416658,.T.); +#416658 = EDGE_LOOP('',(#416659,#416660,#416661,#416662,#416663,#416664, + #416665,#416666)); +#416659 = ORIENTED_EDGE('',*,*,#416398,.T.); +#416660 = ORIENTED_EDGE('',*,*,#416431,.T.); +#416661 = ORIENTED_EDGE('',*,*,#416462,.T.); +#416662 = ORIENTED_EDGE('',*,*,#416495,.T.); +#416663 = ORIENTED_EDGE('',*,*,#416526,.T.); +#416664 = ORIENTED_EDGE('',*,*,#416559,.T.); +#416665 = ORIENTED_EDGE('',*,*,#416590,.T.); +#416666 = ORIENTED_EDGE('',*,*,#416623,.T.); +#416667 = PLANE('',#416668); +#416668 = AXIS2_PLACEMENT_3D('',#416669,#416670,#416671); +#416669 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#416670 = DIRECTION('',(-0.,-0.,-1.)); +#416671 = DIRECTION('',(-1.,0.,0.)); +#416672 = MANIFOLD_SOLID_BREP('',#416673); +#416673 = CLOSED_SHELL('',(#416674,#416716,#416747,#416780,#416811, + #416844,#416875,#416908,#416930,#416946)); +#416674 = ADVANCED_FACE('',(#416675),#416711,.T.); +#416675 = FACE_BOUND('',#416676,.F.); +#416676 = EDGE_LOOP('',(#416677,#416687,#416696,#416704)); +#416677 = ORIENTED_EDGE('',*,*,#416678,.T.); +#416678 = EDGE_CURVE('',#416679,#416681,#416683,.T.); +#416679 = VERTEX_POINT('',#416680); +#416680 = CARTESIAN_POINT('',(135.19,-116.86,0.)); +#416681 = VERTEX_POINT('',#416682); +#416682 = CARTESIAN_POINT('',(135.19,-116.86,-4.E-02)); +#416683 = LINE('',#416684,#416685); +#416684 = CARTESIAN_POINT('',(135.19,-116.86,0.)); +#416685 = VECTOR('',#416686,1.); +#416686 = DIRECTION('',(0.,0.,-1.)); +#416687 = ORIENTED_EDGE('',*,*,#416688,.T.); +#416688 = EDGE_CURVE('',#416681,#416689,#416691,.T.); +#416689 = VERTEX_POINT('',#416690); +#416690 = CARTESIAN_POINT('',(135.33,-116.72,-4.E-02)); +#416691 = CIRCLE('',#416692,0.139999827125); +#416692 = AXIS2_PLACEMENT_3D('',#416693,#416694,#416695); +#416693 = CARTESIAN_POINT('',(135.32999982712,-116.8599998271,-4.E-02)); +#416694 = DIRECTION('',(0.,0.,-1.)); +#416695 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#416696 = ORIENTED_EDGE('',*,*,#416697,.F.); +#416697 = EDGE_CURVE('',#416698,#416689,#416700,.T.); +#416698 = VERTEX_POINT('',#416699); +#416699 = CARTESIAN_POINT('',(135.33,-116.72,0.)); +#416700 = LINE('',#416701,#416702); +#416701 = CARTESIAN_POINT('',(135.33,-116.72,0.)); +#416702 = VECTOR('',#416703,1.); +#416703 = DIRECTION('',(0.,0.,-1.)); +#416704 = ORIENTED_EDGE('',*,*,#416705,.F.); +#416705 = EDGE_CURVE('',#416679,#416698,#416706,.T.); +#416706 = CIRCLE('',#416707,0.139999827125); +#416707 = AXIS2_PLACEMENT_3D('',#416708,#416709,#416710); +#416708 = CARTESIAN_POINT('',(135.32999982712,-116.8599998271,0.)); +#416709 = DIRECTION('',(0.,0.,-1.)); +#416710 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#416711 = CYLINDRICAL_SURFACE('',#416712,0.139999827125); +#416712 = AXIS2_PLACEMENT_3D('',#416713,#416714,#416715); +#416713 = CARTESIAN_POINT('',(135.32999982712,-116.8599998271,0.)); +#416714 = DIRECTION('',(-0.,-0.,1.)); +#416715 = DIRECTION('',(-0.999999999999,-1.234820248241E-06,-0.)); +#416716 = ADVANCED_FACE('',(#416717),#416742,.F.); +#416717 = FACE_BOUND('',#416718,.F.); +#416718 = EDGE_LOOP('',(#416719,#416720,#416728,#416736)); +#416719 = ORIENTED_EDGE('',*,*,#416697,.T.); +#416720 = ORIENTED_EDGE('',*,*,#416721,.T.); +#416721 = EDGE_CURVE('',#416689,#416722,#416724,.T.); +#416722 = VERTEX_POINT('',#416723); +#416723 = CARTESIAN_POINT('',(135.67,-116.72,-4.E-02)); +#416724 = LINE('',#416725,#416726); +#416725 = CARTESIAN_POINT('',(135.33,-116.72,-4.E-02)); +#416726 = VECTOR('',#416727,1.); +#416727 = DIRECTION('',(1.,0.,0.)); +#416728 = ORIENTED_EDGE('',*,*,#416729,.F.); +#416729 = EDGE_CURVE('',#416730,#416722,#416732,.T.); +#416730 = VERTEX_POINT('',#416731); +#416731 = CARTESIAN_POINT('',(135.67,-116.72,0.)); +#416732 = LINE('',#416733,#416734); +#416733 = CARTESIAN_POINT('',(135.67,-116.72,0.)); +#416734 = VECTOR('',#416735,1.); +#416735 = DIRECTION('',(0.,0.,-1.)); +#416736 = ORIENTED_EDGE('',*,*,#416737,.F.); +#416737 = EDGE_CURVE('',#416698,#416730,#416738,.T.); +#416738 = LINE('',#416739,#416740); +#416739 = CARTESIAN_POINT('',(135.33,-116.72,0.)); +#416740 = VECTOR('',#416741,1.); +#416741 = DIRECTION('',(1.,0.,0.)); +#416742 = PLANE('',#416743); +#416743 = AXIS2_PLACEMENT_3D('',#416744,#416745,#416746); +#416744 = CARTESIAN_POINT('',(135.33,-116.72,0.)); +#416745 = DIRECTION('',(0.,-1.,0.)); +#416746 = DIRECTION('',(1.,0.,0.)); +#416747 = ADVANCED_FACE('',(#416748),#416775,.T.); +#416748 = FACE_BOUND('',#416749,.F.); +#416749 = EDGE_LOOP('',(#416750,#416751,#416760,#416768)); +#416750 = ORIENTED_EDGE('',*,*,#416729,.T.); +#416751 = ORIENTED_EDGE('',*,*,#416752,.T.); +#416752 = EDGE_CURVE('',#416722,#416753,#416755,.T.); +#416753 = VERTEX_POINT('',#416754); +#416754 = CARTESIAN_POINT('',(135.81,-116.86,-4.E-02)); +#416755 = CIRCLE('',#416756,0.139999827125); +#416756 = AXIS2_PLACEMENT_3D('',#416757,#416758,#416759); +#416757 = CARTESIAN_POINT('',(135.67000017287,-116.8599998271,-4.E-02)); +#416758 = DIRECTION('',(0.,0.,-1.)); +#416759 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#416760 = ORIENTED_EDGE('',*,*,#416761,.F.); +#416761 = EDGE_CURVE('',#416762,#416753,#416764,.T.); +#416762 = VERTEX_POINT('',#416763); +#416763 = CARTESIAN_POINT('',(135.81,-116.86,0.)); +#416764 = LINE('',#416765,#416766); +#416765 = CARTESIAN_POINT('',(135.81,-116.86,0.)); +#416766 = VECTOR('',#416767,1.); +#416767 = DIRECTION('',(0.,0.,-1.)); +#416768 = ORIENTED_EDGE('',*,*,#416769,.F.); +#416769 = EDGE_CURVE('',#416730,#416762,#416770,.T.); +#416770 = CIRCLE('',#416771,0.139999827125); +#416771 = AXIS2_PLACEMENT_3D('',#416772,#416773,#416774); +#416772 = CARTESIAN_POINT('',(135.67000017287,-116.8599998271,0.)); +#416773 = DIRECTION('',(0.,0.,-1.)); +#416774 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#416775 = CYLINDRICAL_SURFACE('',#416776,0.139999827125); +#416776 = AXIS2_PLACEMENT_3D('',#416777,#416778,#416779); +#416777 = CARTESIAN_POINT('',(135.67000017287,-116.8599998271,0.)); +#416778 = DIRECTION('',(-0.,-0.,1.)); +#416779 = DIRECTION('',(-1.234820248241E-06,0.999999999999,0.)); +#416780 = ADVANCED_FACE('',(#416781),#416806,.F.); +#416781 = FACE_BOUND('',#416782,.F.); +#416782 = EDGE_LOOP('',(#416783,#416784,#416792,#416800)); +#416783 = ORIENTED_EDGE('',*,*,#416761,.T.); +#416784 = ORIENTED_EDGE('',*,*,#416785,.T.); +#416785 = EDGE_CURVE('',#416753,#416786,#416788,.T.); +#416786 = VERTEX_POINT('',#416787); +#416787 = CARTESIAN_POINT('',(135.81,-117.14,-4.E-02)); +#416788 = LINE('',#416789,#416790); +#416789 = CARTESIAN_POINT('',(135.81,-116.86,-4.E-02)); +#416790 = VECTOR('',#416791,1.); +#416791 = DIRECTION('',(0.,-1.,0.)); +#416792 = ORIENTED_EDGE('',*,*,#416793,.F.); +#416793 = EDGE_CURVE('',#416794,#416786,#416796,.T.); +#416794 = VERTEX_POINT('',#416795); +#416795 = CARTESIAN_POINT('',(135.81,-117.14,0.)); +#416796 = LINE('',#416797,#416798); +#416797 = CARTESIAN_POINT('',(135.81,-117.14,0.)); +#416798 = VECTOR('',#416799,1.); +#416799 = DIRECTION('',(0.,0.,-1.)); +#416800 = ORIENTED_EDGE('',*,*,#416801,.F.); +#416801 = EDGE_CURVE('',#416762,#416794,#416802,.T.); +#416802 = LINE('',#416803,#416804); +#416803 = CARTESIAN_POINT('',(135.81,-116.86,0.)); +#416804 = VECTOR('',#416805,1.); +#416805 = DIRECTION('',(0.,-1.,0.)); +#416806 = PLANE('',#416807); +#416807 = AXIS2_PLACEMENT_3D('',#416808,#416809,#416810); +#416808 = CARTESIAN_POINT('',(135.81,-116.86,0.)); +#416809 = DIRECTION('',(-1.,-0.,-0.)); +#416810 = DIRECTION('',(0.,-1.,0.)); +#416811 = ADVANCED_FACE('',(#416812),#416839,.T.); +#416812 = FACE_BOUND('',#416813,.F.); +#416813 = EDGE_LOOP('',(#416814,#416815,#416824,#416832)); +#416814 = ORIENTED_EDGE('',*,*,#416793,.T.); +#416815 = ORIENTED_EDGE('',*,*,#416816,.T.); +#416816 = EDGE_CURVE('',#416786,#416817,#416819,.T.); +#416817 = VERTEX_POINT('',#416818); +#416818 = CARTESIAN_POINT('',(135.67,-117.28,-4.E-02)); +#416819 = CIRCLE('',#416820,0.139999827125); +#416820 = AXIS2_PLACEMENT_3D('',#416821,#416822,#416823); +#416821 = CARTESIAN_POINT('',(135.67000017287,-117.1400001728,-4.E-02)); +#416822 = DIRECTION('',(0.,0.,-1.)); +#416823 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#416824 = ORIENTED_EDGE('',*,*,#416825,.F.); +#416825 = EDGE_CURVE('',#416826,#416817,#416828,.T.); +#416826 = VERTEX_POINT('',#416827); +#416827 = CARTESIAN_POINT('',(135.67,-117.28,0.)); +#416828 = LINE('',#416829,#416830); +#416829 = CARTESIAN_POINT('',(135.67,-117.28,0.)); +#416830 = VECTOR('',#416831,1.); +#416831 = DIRECTION('',(0.,0.,-1.)); +#416832 = ORIENTED_EDGE('',*,*,#416833,.F.); +#416833 = EDGE_CURVE('',#416794,#416826,#416834,.T.); +#416834 = CIRCLE('',#416835,0.139999827125); +#416835 = AXIS2_PLACEMENT_3D('',#416836,#416837,#416838); +#416836 = CARTESIAN_POINT('',(135.67000017287,-117.1400001728,0.)); +#416837 = DIRECTION('',(0.,0.,-1.)); +#416838 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#416839 = CYLINDRICAL_SURFACE('',#416840,0.139999827125); +#416840 = AXIS2_PLACEMENT_3D('',#416841,#416842,#416843); +#416841 = CARTESIAN_POINT('',(135.67000017287,-117.1400001728,0.)); +#416842 = DIRECTION('',(-0.,-0.,1.)); +#416843 = DIRECTION('',(0.999999999999,1.234820248241E-06,0.)); +#416844 = ADVANCED_FACE('',(#416845),#416870,.F.); +#416845 = FACE_BOUND('',#416846,.F.); +#416846 = EDGE_LOOP('',(#416847,#416848,#416856,#416864)); +#416847 = ORIENTED_EDGE('',*,*,#416825,.T.); +#416848 = ORIENTED_EDGE('',*,*,#416849,.T.); +#416849 = EDGE_CURVE('',#416817,#416850,#416852,.T.); +#416850 = VERTEX_POINT('',#416851); +#416851 = CARTESIAN_POINT('',(135.33,-117.28,-4.E-02)); +#416852 = LINE('',#416853,#416854); +#416853 = CARTESIAN_POINT('',(135.67,-117.28,-4.E-02)); +#416854 = VECTOR('',#416855,1.); +#416855 = DIRECTION('',(-1.,0.,0.)); +#416856 = ORIENTED_EDGE('',*,*,#416857,.F.); +#416857 = EDGE_CURVE('',#416858,#416850,#416860,.T.); +#416858 = VERTEX_POINT('',#416859); +#416859 = CARTESIAN_POINT('',(135.33,-117.28,0.)); +#416860 = LINE('',#416861,#416862); +#416861 = CARTESIAN_POINT('',(135.33,-117.28,0.)); +#416862 = VECTOR('',#416863,1.); +#416863 = DIRECTION('',(0.,0.,-1.)); +#416864 = ORIENTED_EDGE('',*,*,#416865,.F.); +#416865 = EDGE_CURVE('',#416826,#416858,#416866,.T.); +#416866 = LINE('',#416867,#416868); +#416867 = CARTESIAN_POINT('',(135.67,-117.28,0.)); +#416868 = VECTOR('',#416869,1.); +#416869 = DIRECTION('',(-1.,0.,0.)); +#416870 = PLANE('',#416871); +#416871 = AXIS2_PLACEMENT_3D('',#416872,#416873,#416874); +#416872 = CARTESIAN_POINT('',(135.67,-117.28,0.)); +#416873 = DIRECTION('',(0.,1.,0.)); +#416874 = DIRECTION('',(-1.,0.,0.)); +#416875 = ADVANCED_FACE('',(#416876),#416903,.T.); +#416876 = FACE_BOUND('',#416877,.F.); +#416877 = EDGE_LOOP('',(#416878,#416879,#416888,#416896)); +#416878 = ORIENTED_EDGE('',*,*,#416857,.T.); +#416879 = ORIENTED_EDGE('',*,*,#416880,.T.); +#416880 = EDGE_CURVE('',#416850,#416881,#416883,.T.); +#416881 = VERTEX_POINT('',#416882); +#416882 = CARTESIAN_POINT('',(135.19,-117.14,-4.E-02)); +#416883 = CIRCLE('',#416884,0.139999827125); +#416884 = AXIS2_PLACEMENT_3D('',#416885,#416886,#416887); +#416885 = CARTESIAN_POINT('',(135.32999982712,-117.1400001728,-4.E-02)); +#416886 = DIRECTION('',(0.,0.,-1.)); +#416887 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#416888 = ORIENTED_EDGE('',*,*,#416889,.F.); +#416889 = EDGE_CURVE('',#416890,#416881,#416892,.T.); +#416890 = VERTEX_POINT('',#416891); +#416891 = CARTESIAN_POINT('',(135.19,-117.14,0.)); +#416892 = LINE('',#416893,#416894); +#416893 = CARTESIAN_POINT('',(135.19,-117.14,0.)); +#416894 = VECTOR('',#416895,1.); +#416895 = DIRECTION('',(0.,0.,-1.)); +#416896 = ORIENTED_EDGE('',*,*,#416897,.F.); +#416897 = EDGE_CURVE('',#416858,#416890,#416898,.T.); +#416898 = CIRCLE('',#416899,0.139999827125); +#416899 = AXIS2_PLACEMENT_3D('',#416900,#416901,#416902); +#416900 = CARTESIAN_POINT('',(135.32999982712,-117.1400001728,0.)); +#416901 = DIRECTION('',(0.,0.,-1.)); +#416902 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#416903 = CYLINDRICAL_SURFACE('',#416904,0.139999827125); +#416904 = AXIS2_PLACEMENT_3D('',#416905,#416906,#416907); +#416905 = CARTESIAN_POINT('',(135.32999982712,-117.1400001728,0.)); +#416906 = DIRECTION('',(-0.,-0.,1.)); +#416907 = DIRECTION('',(1.234820248241E-06,-0.999999999999,0.)); +#416908 = ADVANCED_FACE('',(#416909),#416925,.F.); +#416909 = FACE_BOUND('',#416910,.F.); +#416910 = EDGE_LOOP('',(#416911,#416912,#416918,#416919)); +#416911 = ORIENTED_EDGE('',*,*,#416889,.T.); +#416912 = ORIENTED_EDGE('',*,*,#416913,.T.); +#416913 = EDGE_CURVE('',#416881,#416681,#416914,.T.); +#416914 = LINE('',#416915,#416916); +#416915 = CARTESIAN_POINT('',(135.19,-117.14,-4.E-02)); +#416916 = VECTOR('',#416917,1.); +#416917 = DIRECTION('',(0.,1.,0.)); +#416918 = ORIENTED_EDGE('',*,*,#416678,.F.); +#416919 = ORIENTED_EDGE('',*,*,#416920,.F.); +#416920 = EDGE_CURVE('',#416890,#416679,#416921,.T.); +#416921 = LINE('',#416922,#416923); +#416922 = CARTESIAN_POINT('',(135.19,-117.14,0.)); +#416923 = VECTOR('',#416924,1.); +#416924 = DIRECTION('',(0.,1.,0.)); +#416925 = PLANE('',#416926); +#416926 = AXIS2_PLACEMENT_3D('',#416927,#416928,#416929); +#416927 = CARTESIAN_POINT('',(135.19,-117.14,0.)); +#416928 = DIRECTION('',(1.,-0.,0.)); +#416929 = DIRECTION('',(0.,1.,0.)); +#416930 = ADVANCED_FACE('',(#416931),#416941,.F.); +#416931 = FACE_BOUND('',#416932,.F.); +#416932 = EDGE_LOOP('',(#416933,#416934,#416935,#416936,#416937,#416938, + #416939,#416940)); +#416933 = ORIENTED_EDGE('',*,*,#416705,.T.); +#416934 = ORIENTED_EDGE('',*,*,#416737,.T.); +#416935 = ORIENTED_EDGE('',*,*,#416769,.T.); +#416936 = ORIENTED_EDGE('',*,*,#416801,.T.); +#416937 = ORIENTED_EDGE('',*,*,#416833,.T.); +#416938 = ORIENTED_EDGE('',*,*,#416865,.T.); +#416939 = ORIENTED_EDGE('',*,*,#416897,.T.); +#416940 = ORIENTED_EDGE('',*,*,#416920,.T.); +#416941 = PLANE('',#416942); +#416942 = AXIS2_PLACEMENT_3D('',#416943,#416944,#416945); +#416943 = CARTESIAN_POINT('',(0.,0.,0.)); +#416944 = DIRECTION('',(-0.,-0.,-1.)); +#416945 = DIRECTION('',(-1.,0.,0.)); +#416946 = ADVANCED_FACE('',(#416947),#416957,.T.); +#416947 = FACE_BOUND('',#416948,.T.); +#416948 = EDGE_LOOP('',(#416949,#416950,#416951,#416952,#416953,#416954, + #416955,#416956)); +#416949 = ORIENTED_EDGE('',*,*,#416688,.T.); +#416950 = ORIENTED_EDGE('',*,*,#416721,.T.); +#416951 = ORIENTED_EDGE('',*,*,#416752,.T.); +#416952 = ORIENTED_EDGE('',*,*,#416785,.T.); +#416953 = ORIENTED_EDGE('',*,*,#416816,.T.); +#416954 = ORIENTED_EDGE('',*,*,#416849,.T.); +#416955 = ORIENTED_EDGE('',*,*,#416880,.T.); +#416956 = ORIENTED_EDGE('',*,*,#416913,.T.); +#416957 = PLANE('',#416958); +#416958 = AXIS2_PLACEMENT_3D('',#416959,#416960,#416961); +#416959 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#416960 = DIRECTION('',(-0.,-0.,-1.)); +#416961 = DIRECTION('',(-1.,0.,0.)); +#416962 = MANIFOLD_SOLID_BREP('',#416963); +#416963 = CLOSED_SHELL('',(#416964,#417006,#417037,#417070,#417101, + #417134,#417165,#417198,#417220,#417236)); +#416964 = ADVANCED_FACE('',(#416965),#417001,.T.); +#416965 = FACE_BOUND('',#416966,.F.); +#416966 = EDGE_LOOP('',(#416967,#416977,#416986,#416994)); +#416967 = ORIENTED_EDGE('',*,*,#416968,.T.); +#416968 = EDGE_CURVE('',#416969,#416971,#416973,.T.); +#416969 = VERTEX_POINT('',#416970); +#416970 = CARTESIAN_POINT('',(133.8,-118.152,0.)); +#416971 = VERTEX_POINT('',#416972); +#416972 = CARTESIAN_POINT('',(133.8,-118.152,-4.E-02)); +#416973 = LINE('',#416974,#416975); +#416974 = CARTESIAN_POINT('',(133.8,-118.152,0.)); +#416975 = VECTOR('',#416976,1.); +#416976 = DIRECTION('',(0.,0.,-1.)); +#416977 = ORIENTED_EDGE('',*,*,#416978,.T.); +#416978 = EDGE_CURVE('',#416971,#416979,#416981,.T.); +#416979 = VERTEX_POINT('',#416980); +#416980 = CARTESIAN_POINT('',(133.852,-118.1,-4.E-02)); +#416981 = CIRCLE('',#416982,5.199847263154E-02); +#416982 = AXIS2_PLACEMENT_3D('',#416983,#416984,#416985); +#416983 = CARTESIAN_POINT('',(133.8519984726,-118.1519984726,-4.E-02)); +#416984 = DIRECTION('',(0.,0.,-1.)); +#416985 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#416986 = ORIENTED_EDGE('',*,*,#416987,.F.); +#416987 = EDGE_CURVE('',#416988,#416979,#416990,.T.); +#416988 = VERTEX_POINT('',#416989); +#416989 = CARTESIAN_POINT('',(133.852,-118.1,0.)); +#416990 = LINE('',#416991,#416992); +#416991 = CARTESIAN_POINT('',(133.852,-118.1,0.)); +#416992 = VECTOR('',#416993,1.); +#416993 = DIRECTION('',(0.,0.,-1.)); +#416994 = ORIENTED_EDGE('',*,*,#416995,.F.); +#416995 = EDGE_CURVE('',#416969,#416988,#416996,.T.); +#416996 = CIRCLE('',#416997,5.199847263154E-02); +#416997 = AXIS2_PLACEMENT_3D('',#416998,#416999,#417000); +#416998 = CARTESIAN_POINT('',(133.8519984726,-118.1519984726,0.)); +#416999 = DIRECTION('',(0.,0.,-1.)); +#417000 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#417001 = CYLINDRICAL_SURFACE('',#417002,5.199847263154E-02); +#417002 = AXIS2_PLACEMENT_3D('',#417003,#417004,#417005); +#417003 = CARTESIAN_POINT('',(133.8519984726,-118.1519984726,0.)); +#417004 = DIRECTION('',(-0.,-0.,1.)); +#417005 = DIRECTION('',(-0.999999999569,-2.937376483937E-05,-0.)); +#417006 = ADVANCED_FACE('',(#417007),#417032,.F.); +#417007 = FACE_BOUND('',#417008,.F.); +#417008 = EDGE_LOOP('',(#417009,#417010,#417018,#417026)); +#417009 = ORIENTED_EDGE('',*,*,#416987,.T.); +#417010 = ORIENTED_EDGE('',*,*,#417011,.T.); +#417011 = EDGE_CURVE('',#416979,#417012,#417014,.T.); +#417012 = VERTEX_POINT('',#417013); +#417013 = CARTESIAN_POINT('',(134.248,-118.1,-4.E-02)); +#417014 = LINE('',#417015,#417016); +#417015 = CARTESIAN_POINT('',(133.852,-118.1,-4.E-02)); +#417016 = VECTOR('',#417017,1.); +#417017 = DIRECTION('',(1.,0.,0.)); +#417018 = ORIENTED_EDGE('',*,*,#417019,.F.); +#417019 = EDGE_CURVE('',#417020,#417012,#417022,.T.); +#417020 = VERTEX_POINT('',#417021); +#417021 = CARTESIAN_POINT('',(134.248,-118.1,0.)); +#417022 = LINE('',#417023,#417024); +#417023 = CARTESIAN_POINT('',(134.248,-118.1,0.)); +#417024 = VECTOR('',#417025,1.); +#417025 = DIRECTION('',(0.,0.,-1.)); +#417026 = ORIENTED_EDGE('',*,*,#417027,.F.); +#417027 = EDGE_CURVE('',#416988,#417020,#417028,.T.); +#417028 = LINE('',#417029,#417030); +#417029 = CARTESIAN_POINT('',(133.852,-118.1,0.)); +#417030 = VECTOR('',#417031,1.); +#417031 = DIRECTION('',(1.,0.,0.)); +#417032 = PLANE('',#417033); +#417033 = AXIS2_PLACEMENT_3D('',#417034,#417035,#417036); +#417034 = CARTESIAN_POINT('',(133.852,-118.1,0.)); +#417035 = DIRECTION('',(0.,-1.,0.)); +#417036 = DIRECTION('',(1.,0.,0.)); +#417037 = ADVANCED_FACE('',(#417038),#417065,.T.); +#417038 = FACE_BOUND('',#417039,.F.); +#417039 = EDGE_LOOP('',(#417040,#417041,#417050,#417058)); +#417040 = ORIENTED_EDGE('',*,*,#417019,.T.); +#417041 = ORIENTED_EDGE('',*,*,#417042,.T.); +#417042 = EDGE_CURVE('',#417012,#417043,#417045,.T.); +#417043 = VERTEX_POINT('',#417044); +#417044 = CARTESIAN_POINT('',(134.3,-118.152,-4.E-02)); +#417045 = CIRCLE('',#417046,5.199847263152E-02); +#417046 = AXIS2_PLACEMENT_3D('',#417047,#417048,#417049); +#417047 = CARTESIAN_POINT('',(134.24800152739,-118.1519984726,-4.E-02)); +#417048 = DIRECTION('',(0.,0.,-1.)); +#417049 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#417050 = ORIENTED_EDGE('',*,*,#417051,.F.); +#417051 = EDGE_CURVE('',#417052,#417043,#417054,.T.); +#417052 = VERTEX_POINT('',#417053); +#417053 = CARTESIAN_POINT('',(134.3,-118.152,0.)); +#417054 = LINE('',#417055,#417056); +#417055 = CARTESIAN_POINT('',(134.3,-118.152,0.)); +#417056 = VECTOR('',#417057,1.); +#417057 = DIRECTION('',(0.,0.,-1.)); +#417058 = ORIENTED_EDGE('',*,*,#417059,.F.); +#417059 = EDGE_CURVE('',#417020,#417052,#417060,.T.); +#417060 = CIRCLE('',#417061,5.199847263152E-02); +#417061 = AXIS2_PLACEMENT_3D('',#417062,#417063,#417064); +#417062 = CARTESIAN_POINT('',(134.24800152739,-118.1519984726,0.)); +#417063 = DIRECTION('',(0.,0.,-1.)); +#417064 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#417065 = CYLINDRICAL_SURFACE('',#417066,5.199847263152E-02); +#417066 = AXIS2_PLACEMENT_3D('',#417067,#417068,#417069); +#417067 = CARTESIAN_POINT('',(134.24800152739,-118.1519984726,0.)); +#417068 = DIRECTION('',(-0.,-0.,1.)); +#417069 = DIRECTION('',(-2.937376538597E-05,0.999999999569,0.)); +#417070 = ADVANCED_FACE('',(#417071),#417096,.F.); +#417071 = FACE_BOUND('',#417072,.F.); +#417072 = EDGE_LOOP('',(#417073,#417074,#417082,#417090)); +#417073 = ORIENTED_EDGE('',*,*,#417051,.T.); +#417074 = ORIENTED_EDGE('',*,*,#417075,.T.); +#417075 = EDGE_CURVE('',#417043,#417076,#417078,.T.); +#417076 = VERTEX_POINT('',#417077); +#417077 = CARTESIAN_POINT('',(134.3,-118.248,-4.E-02)); +#417078 = LINE('',#417079,#417080); +#417079 = CARTESIAN_POINT('',(134.3,-118.152,-4.E-02)); +#417080 = VECTOR('',#417081,1.); +#417081 = DIRECTION('',(0.,-1.,0.)); +#417082 = ORIENTED_EDGE('',*,*,#417083,.F.); +#417083 = EDGE_CURVE('',#417084,#417076,#417086,.T.); +#417084 = VERTEX_POINT('',#417085); +#417085 = CARTESIAN_POINT('',(134.3,-118.248,0.)); +#417086 = LINE('',#417087,#417088); +#417087 = CARTESIAN_POINT('',(134.3,-118.248,0.)); +#417088 = VECTOR('',#417089,1.); +#417089 = DIRECTION('',(0.,0.,-1.)); +#417090 = ORIENTED_EDGE('',*,*,#417091,.F.); +#417091 = EDGE_CURVE('',#417052,#417084,#417092,.T.); +#417092 = LINE('',#417093,#417094); +#417093 = CARTESIAN_POINT('',(134.3,-118.152,0.)); +#417094 = VECTOR('',#417095,1.); +#417095 = DIRECTION('',(0.,-1.,0.)); +#417096 = PLANE('',#417097); +#417097 = AXIS2_PLACEMENT_3D('',#417098,#417099,#417100); +#417098 = CARTESIAN_POINT('',(134.3,-118.152,0.)); +#417099 = DIRECTION('',(-1.,-0.,-0.)); +#417100 = DIRECTION('',(0.,-1.,0.)); +#417101 = ADVANCED_FACE('',(#417102),#417129,.T.); +#417102 = FACE_BOUND('',#417103,.F.); +#417103 = EDGE_LOOP('',(#417104,#417105,#417114,#417122)); +#417104 = ORIENTED_EDGE('',*,*,#417083,.T.); +#417105 = ORIENTED_EDGE('',*,*,#417106,.T.); +#417106 = EDGE_CURVE('',#417076,#417107,#417109,.T.); +#417107 = VERTEX_POINT('',#417108); +#417108 = CARTESIAN_POINT('',(134.248,-118.3,-4.E-02)); +#417109 = CIRCLE('',#417110,5.199847263153E-02); +#417110 = AXIS2_PLACEMENT_3D('',#417111,#417112,#417113); +#417111 = CARTESIAN_POINT('',(134.24800152739,-118.2480015273,-4.E-02)); +#417112 = DIRECTION('',(0.,0.,-1.)); +#417113 = DIRECTION('',(0.999999999569,2.93737642928E-05,0.)); +#417114 = ORIENTED_EDGE('',*,*,#417115,.F.); +#417115 = EDGE_CURVE('',#417116,#417107,#417118,.T.); +#417116 = VERTEX_POINT('',#417117); +#417117 = CARTESIAN_POINT('',(134.248,-118.3,0.)); +#417118 = LINE('',#417119,#417120); +#417119 = CARTESIAN_POINT('',(134.248,-118.3,0.)); +#417120 = VECTOR('',#417121,1.); +#417121 = DIRECTION('',(0.,0.,-1.)); +#417122 = ORIENTED_EDGE('',*,*,#417123,.F.); +#417123 = EDGE_CURVE('',#417084,#417116,#417124,.T.); +#417124 = CIRCLE('',#417125,5.199847263153E-02); +#417125 = AXIS2_PLACEMENT_3D('',#417126,#417127,#417128); +#417126 = CARTESIAN_POINT('',(134.24800152739,-118.2480015273,0.)); +#417127 = DIRECTION('',(0.,0.,-1.)); +#417128 = DIRECTION('',(0.999999999569,2.93737642928E-05,0.)); +#417129 = CYLINDRICAL_SURFACE('',#417130,5.199847263153E-02); +#417130 = AXIS2_PLACEMENT_3D('',#417131,#417132,#417133); +#417131 = CARTESIAN_POINT('',(134.24800152739,-118.2480015273,0.)); +#417132 = DIRECTION('',(-0.,-0.,1.)); +#417133 = DIRECTION('',(0.999999999569,2.93737642928E-05,0.)); +#417134 = ADVANCED_FACE('',(#417135),#417160,.F.); +#417135 = FACE_BOUND('',#417136,.F.); +#417136 = EDGE_LOOP('',(#417137,#417138,#417146,#417154)); +#417137 = ORIENTED_EDGE('',*,*,#417115,.T.); +#417138 = ORIENTED_EDGE('',*,*,#417139,.T.); +#417139 = EDGE_CURVE('',#417107,#417140,#417142,.T.); +#417140 = VERTEX_POINT('',#417141); +#417141 = CARTESIAN_POINT('',(133.852,-118.3,-4.E-02)); +#417142 = LINE('',#417143,#417144); +#417143 = CARTESIAN_POINT('',(134.248,-118.3,-4.E-02)); +#417144 = VECTOR('',#417145,1.); +#417145 = DIRECTION('',(-1.,0.,0.)); +#417146 = ORIENTED_EDGE('',*,*,#417147,.F.); +#417147 = EDGE_CURVE('',#417148,#417140,#417150,.T.); +#417148 = VERTEX_POINT('',#417149); +#417149 = CARTESIAN_POINT('',(133.852,-118.3,0.)); +#417150 = LINE('',#417151,#417152); +#417151 = CARTESIAN_POINT('',(133.852,-118.3,0.)); +#417152 = VECTOR('',#417153,1.); +#417153 = DIRECTION('',(0.,0.,-1.)); +#417154 = ORIENTED_EDGE('',*,*,#417155,.F.); +#417155 = EDGE_CURVE('',#417116,#417148,#417156,.T.); +#417156 = LINE('',#417157,#417158); +#417157 = CARTESIAN_POINT('',(134.248,-118.3,0.)); +#417158 = VECTOR('',#417159,1.); +#417159 = DIRECTION('',(-1.,0.,0.)); +#417160 = PLANE('',#417161); +#417161 = AXIS2_PLACEMENT_3D('',#417162,#417163,#417164); +#417162 = CARTESIAN_POINT('',(134.248,-118.3,0.)); +#417163 = DIRECTION('',(0.,1.,0.)); +#417164 = DIRECTION('',(-1.,0.,0.)); +#417165 = ADVANCED_FACE('',(#417166),#417193,.T.); +#417166 = FACE_BOUND('',#417167,.F.); +#417167 = EDGE_LOOP('',(#417168,#417169,#417178,#417186)); +#417168 = ORIENTED_EDGE('',*,*,#417147,.T.); +#417169 = ORIENTED_EDGE('',*,*,#417170,.T.); +#417170 = EDGE_CURVE('',#417140,#417171,#417173,.T.); +#417171 = VERTEX_POINT('',#417172); +#417172 = CARTESIAN_POINT('',(133.8,-118.248,-4.E-02)); +#417173 = CIRCLE('',#417174,5.199847263155E-02); +#417174 = AXIS2_PLACEMENT_3D('',#417175,#417176,#417177); +#417175 = CARTESIAN_POINT('',(133.8519984726,-118.2480015273,-4.E-02)); +#417176 = DIRECTION('',(0.,0.,-1.)); +#417177 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#417178 = ORIENTED_EDGE('',*,*,#417179,.F.); +#417179 = EDGE_CURVE('',#417180,#417171,#417182,.T.); +#417180 = VERTEX_POINT('',#417181); +#417181 = CARTESIAN_POINT('',(133.8,-118.248,0.)); +#417182 = LINE('',#417183,#417184); +#417183 = CARTESIAN_POINT('',(133.8,-118.248,0.)); +#417184 = VECTOR('',#417185,1.); +#417185 = DIRECTION('',(0.,0.,-1.)); +#417186 = ORIENTED_EDGE('',*,*,#417187,.F.); +#417187 = EDGE_CURVE('',#417148,#417180,#417188,.T.); +#417188 = CIRCLE('',#417189,5.199847263155E-02); +#417189 = AXIS2_PLACEMENT_3D('',#417190,#417191,#417192); +#417190 = CARTESIAN_POINT('',(133.8519984726,-118.2480015273,0.)); +#417191 = DIRECTION('',(0.,0.,-1.)); +#417192 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#417193 = CYLINDRICAL_SURFACE('',#417194,5.199847263155E-02); +#417194 = AXIS2_PLACEMENT_3D('',#417195,#417196,#417197); +#417195 = CARTESIAN_POINT('',(133.8519984726,-118.2480015273,0.)); +#417196 = DIRECTION('',(-0.,-0.,1.)); +#417197 = DIRECTION('',(2.937376429279E-05,-0.999999999569,0.)); +#417198 = ADVANCED_FACE('',(#417199),#417215,.F.); +#417199 = FACE_BOUND('',#417200,.F.); +#417200 = EDGE_LOOP('',(#417201,#417202,#417208,#417209)); +#417201 = ORIENTED_EDGE('',*,*,#417179,.T.); +#417202 = ORIENTED_EDGE('',*,*,#417203,.T.); +#417203 = EDGE_CURVE('',#417171,#416971,#417204,.T.); +#417204 = LINE('',#417205,#417206); +#417205 = CARTESIAN_POINT('',(133.8,-118.248,-4.E-02)); +#417206 = VECTOR('',#417207,1.); +#417207 = DIRECTION('',(0.,1.,0.)); +#417208 = ORIENTED_EDGE('',*,*,#416968,.F.); +#417209 = ORIENTED_EDGE('',*,*,#417210,.F.); +#417210 = EDGE_CURVE('',#417180,#416969,#417211,.T.); +#417211 = LINE('',#417212,#417213); +#417212 = CARTESIAN_POINT('',(133.8,-118.248,0.)); +#417213 = VECTOR('',#417214,1.); +#417214 = DIRECTION('',(0.,1.,0.)); +#417215 = PLANE('',#417216); +#417216 = AXIS2_PLACEMENT_3D('',#417217,#417218,#417219); +#417217 = CARTESIAN_POINT('',(133.8,-118.248,0.)); +#417218 = DIRECTION('',(1.,-0.,0.)); +#417219 = DIRECTION('',(0.,1.,0.)); +#417220 = ADVANCED_FACE('',(#417221),#417231,.F.); +#417221 = FACE_BOUND('',#417222,.F.); +#417222 = EDGE_LOOP('',(#417223,#417224,#417225,#417226,#417227,#417228, + #417229,#417230)); +#417223 = ORIENTED_EDGE('',*,*,#416995,.T.); +#417224 = ORIENTED_EDGE('',*,*,#417027,.T.); +#417225 = ORIENTED_EDGE('',*,*,#417059,.T.); +#417226 = ORIENTED_EDGE('',*,*,#417091,.T.); +#417227 = ORIENTED_EDGE('',*,*,#417123,.T.); +#417228 = ORIENTED_EDGE('',*,*,#417155,.T.); +#417229 = ORIENTED_EDGE('',*,*,#417187,.T.); +#417230 = ORIENTED_EDGE('',*,*,#417210,.T.); +#417231 = PLANE('',#417232); +#417232 = AXIS2_PLACEMENT_3D('',#417233,#417234,#417235); +#417233 = CARTESIAN_POINT('',(0.,0.,0.)); +#417234 = DIRECTION('',(-0.,-0.,-1.)); +#417235 = DIRECTION('',(-1.,0.,0.)); +#417236 = ADVANCED_FACE('',(#417237),#417247,.T.); +#417237 = FACE_BOUND('',#417238,.T.); +#417238 = EDGE_LOOP('',(#417239,#417240,#417241,#417242,#417243,#417244, + #417245,#417246)); +#417239 = ORIENTED_EDGE('',*,*,#416978,.T.); +#417240 = ORIENTED_EDGE('',*,*,#417011,.T.); +#417241 = ORIENTED_EDGE('',*,*,#417042,.T.); +#417242 = ORIENTED_EDGE('',*,*,#417075,.T.); +#417243 = ORIENTED_EDGE('',*,*,#417106,.T.); +#417244 = ORIENTED_EDGE('',*,*,#417139,.T.); +#417245 = ORIENTED_EDGE('',*,*,#417170,.T.); +#417246 = ORIENTED_EDGE('',*,*,#417203,.T.); +#417247 = PLANE('',#417248); +#417248 = AXIS2_PLACEMENT_3D('',#417249,#417250,#417251); +#417249 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#417250 = DIRECTION('',(-0.,-0.,-1.)); +#417251 = DIRECTION('',(-1.,0.,0.)); +#417252 = MANIFOLD_SOLID_BREP('',#417253); +#417253 = CLOSED_SHELL('',(#417254,#417296,#417327,#417360,#417391, + #417424,#417455,#417488,#417510,#417526)); +#417254 = ADVANCED_FACE('',(#417255),#417291,.T.); +#417255 = FACE_BOUND('',#417256,.F.); +#417256 = EDGE_LOOP('',(#417257,#417267,#417276,#417284)); +#417257 = ORIENTED_EDGE('',*,*,#417258,.T.); +#417258 = EDGE_CURVE('',#417259,#417261,#417263,.T.); +#417259 = VERTEX_POINT('',#417260); +#417260 = CARTESIAN_POINT('',(130.225,-107.2125,0.)); +#417261 = VERTEX_POINT('',#417262); +#417262 = CARTESIAN_POINT('',(130.225,-107.2125,-4.E-02)); +#417263 = LINE('',#417264,#417265); +#417264 = CARTESIAN_POINT('',(130.225,-107.2125,0.)); +#417265 = VECTOR('',#417266,1.); +#417266 = DIRECTION('',(0.,0.,-1.)); +#417267 = ORIENTED_EDGE('',*,*,#417268,.T.); +#417268 = EDGE_CURVE('',#417261,#417269,#417271,.T.); +#417269 = VERTEX_POINT('',#417270); +#417270 = CARTESIAN_POINT('',(130.375,-107.0625,-4.E-02)); +#417271 = CIRCLE('',#417272,0.150000058649); +#417272 = AXIS2_PLACEMENT_3D('',#417273,#417274,#417275); +#417273 = CARTESIAN_POINT('',(130.37500005864,-107.2125000586,-4.E-02)); +#417274 = DIRECTION('',(0.,0.,-1.)); +#417275 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#417276 = ORIENTED_EDGE('',*,*,#417277,.F.); +#417277 = EDGE_CURVE('',#417278,#417269,#417280,.T.); +#417278 = VERTEX_POINT('',#417279); +#417279 = CARTESIAN_POINT('',(130.375,-107.0625,0.)); +#417280 = LINE('',#417281,#417282); +#417281 = CARTESIAN_POINT('',(130.375,-107.0625,0.)); +#417282 = VECTOR('',#417283,1.); +#417283 = DIRECTION('',(0.,0.,-1.)); +#417284 = ORIENTED_EDGE('',*,*,#417285,.F.); +#417285 = EDGE_CURVE('',#417259,#417278,#417286,.T.); +#417286 = CIRCLE('',#417287,0.150000058649); +#417287 = AXIS2_PLACEMENT_3D('',#417288,#417289,#417290); +#417288 = CARTESIAN_POINT('',(130.37500005864,-107.2125000586,0.)); +#417289 = DIRECTION('',(0.,0.,-1.)); +#417290 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#417291 = CYLINDRICAL_SURFACE('',#417292,0.150000058649); +#417292 = AXIS2_PLACEMENT_3D('',#417293,#417294,#417295); +#417293 = CARTESIAN_POINT('',(130.37500005864,-107.2125000586,0.)); +#417294 = DIRECTION('',(-0.,-0.,1.)); +#417295 = DIRECTION('',(-1.,3.909954089759E-07,0.)); +#417296 = ADVANCED_FACE('',(#417297),#417322,.F.); +#417297 = FACE_BOUND('',#417298,.F.); +#417298 = EDGE_LOOP('',(#417299,#417300,#417308,#417316)); +#417299 = ORIENTED_EDGE('',*,*,#417277,.T.); +#417300 = ORIENTED_EDGE('',*,*,#417301,.T.); +#417301 = EDGE_CURVE('',#417269,#417302,#417304,.T.); +#417302 = VERTEX_POINT('',#417303); +#417303 = CARTESIAN_POINT('',(130.675,-107.0625,-4.E-02)); +#417304 = LINE('',#417305,#417306); +#417305 = CARTESIAN_POINT('',(130.375,-107.0625,-4.E-02)); +#417306 = VECTOR('',#417307,1.); +#417307 = DIRECTION('',(1.,0.,0.)); +#417308 = ORIENTED_EDGE('',*,*,#417309,.F.); +#417309 = EDGE_CURVE('',#417310,#417302,#417312,.T.); +#417310 = VERTEX_POINT('',#417311); +#417311 = CARTESIAN_POINT('',(130.675,-107.0625,0.)); +#417312 = LINE('',#417313,#417314); +#417313 = CARTESIAN_POINT('',(130.675,-107.0625,0.)); +#417314 = VECTOR('',#417315,1.); +#417315 = DIRECTION('',(0.,0.,-1.)); +#417316 = ORIENTED_EDGE('',*,*,#417317,.F.); +#417317 = EDGE_CURVE('',#417278,#417310,#417318,.T.); +#417318 = LINE('',#417319,#417320); +#417319 = CARTESIAN_POINT('',(130.375,-107.0625,0.)); +#417320 = VECTOR('',#417321,1.); +#417321 = DIRECTION('',(1.,0.,0.)); +#417322 = PLANE('',#417323); +#417323 = AXIS2_PLACEMENT_3D('',#417324,#417325,#417326); +#417324 = CARTESIAN_POINT('',(130.375,-107.0625,0.)); +#417325 = DIRECTION('',(0.,-1.,0.)); +#417326 = DIRECTION('',(1.,0.,0.)); +#417327 = ADVANCED_FACE('',(#417328),#417355,.T.); +#417328 = FACE_BOUND('',#417329,.F.); +#417329 = EDGE_LOOP('',(#417330,#417331,#417340,#417348)); +#417330 = ORIENTED_EDGE('',*,*,#417309,.T.); +#417331 = ORIENTED_EDGE('',*,*,#417332,.T.); +#417332 = EDGE_CURVE('',#417302,#417333,#417335,.T.); +#417333 = VERTEX_POINT('',#417334); +#417334 = CARTESIAN_POINT('',(130.825,-107.2125,-4.E-02)); +#417335 = CIRCLE('',#417336,0.150000058649); +#417336 = AXIS2_PLACEMENT_3D('',#417337,#417338,#417339); +#417337 = CARTESIAN_POINT('',(130.67499994135,-107.2125000586,-4.E-02)); +#417338 = DIRECTION('',(0.,0.,-1.)); +#417339 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#417340 = ORIENTED_EDGE('',*,*,#417341,.F.); +#417341 = EDGE_CURVE('',#417342,#417333,#417344,.T.); +#417342 = VERTEX_POINT('',#417343); +#417343 = CARTESIAN_POINT('',(130.825,-107.2125,0.)); +#417344 = LINE('',#417345,#417346); +#417345 = CARTESIAN_POINT('',(130.825,-107.2125,0.)); +#417346 = VECTOR('',#417347,1.); +#417347 = DIRECTION('',(0.,0.,-1.)); +#417348 = ORIENTED_EDGE('',*,*,#417349,.F.); +#417349 = EDGE_CURVE('',#417310,#417342,#417350,.T.); +#417350 = CIRCLE('',#417351,0.150000058649); +#417351 = AXIS2_PLACEMENT_3D('',#417352,#417353,#417354); +#417352 = CARTESIAN_POINT('',(130.67499994135,-107.2125000586,0.)); +#417353 = DIRECTION('',(0.,0.,-1.)); +#417354 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#417355 = CYLINDRICAL_SURFACE('',#417356,0.150000058649); +#417356 = AXIS2_PLACEMENT_3D('',#417357,#417358,#417359); +#417357 = CARTESIAN_POINT('',(130.67499994135,-107.2125000586,0.)); +#417358 = DIRECTION('',(-0.,-0.,1.)); +#417359 = DIRECTION('',(3.909952194981E-07,1.,0.)); +#417360 = ADVANCED_FACE('',(#417361),#417386,.F.); +#417361 = FACE_BOUND('',#417362,.F.); +#417362 = EDGE_LOOP('',(#417363,#417364,#417372,#417380)); +#417363 = ORIENTED_EDGE('',*,*,#417341,.T.); +#417364 = ORIENTED_EDGE('',*,*,#417365,.T.); +#417365 = EDGE_CURVE('',#417333,#417366,#417368,.T.); +#417366 = VERTEX_POINT('',#417367); +#417367 = CARTESIAN_POINT('',(130.825,-108.2375,-4.E-02)); +#417368 = LINE('',#417369,#417370); +#417369 = CARTESIAN_POINT('',(130.825,-107.2125,-4.E-02)); +#417370 = VECTOR('',#417371,1.); +#417371 = DIRECTION('',(0.,-1.,0.)); +#417372 = ORIENTED_EDGE('',*,*,#417373,.F.); +#417373 = EDGE_CURVE('',#417374,#417366,#417376,.T.); +#417374 = VERTEX_POINT('',#417375); +#417375 = CARTESIAN_POINT('',(130.825,-108.2375,0.)); +#417376 = LINE('',#417377,#417378); +#417377 = CARTESIAN_POINT('',(130.825,-108.2375,0.)); +#417378 = VECTOR('',#417379,1.); +#417379 = DIRECTION('',(0.,0.,-1.)); +#417380 = ORIENTED_EDGE('',*,*,#417381,.F.); +#417381 = EDGE_CURVE('',#417342,#417374,#417382,.T.); +#417382 = LINE('',#417383,#417384); +#417383 = CARTESIAN_POINT('',(130.825,-107.2125,0.)); +#417384 = VECTOR('',#417385,1.); +#417385 = DIRECTION('',(0.,-1.,0.)); +#417386 = PLANE('',#417387); +#417387 = AXIS2_PLACEMENT_3D('',#417388,#417389,#417390); +#417388 = CARTESIAN_POINT('',(130.825,-107.2125,0.)); +#417389 = DIRECTION('',(-1.,-0.,-0.)); +#417390 = DIRECTION('',(0.,-1.,0.)); +#417391 = ADVANCED_FACE('',(#417392),#417419,.T.); +#417392 = FACE_BOUND('',#417393,.F.); +#417393 = EDGE_LOOP('',(#417394,#417395,#417404,#417412)); +#417394 = ORIENTED_EDGE('',*,*,#417373,.T.); +#417395 = ORIENTED_EDGE('',*,*,#417396,.T.); +#417396 = EDGE_CURVE('',#417366,#417397,#417399,.T.); +#417397 = VERTEX_POINT('',#417398); +#417398 = CARTESIAN_POINT('',(130.675,-108.3875,-4.E-02)); +#417399 = CIRCLE('',#417400,0.150000058649); +#417400 = AXIS2_PLACEMENT_3D('',#417401,#417402,#417403); +#417401 = CARTESIAN_POINT('',(130.67499994135,-108.2374999413,-4.E-02)); +#417402 = DIRECTION('',(0.,0.,-1.)); +#417403 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#417404 = ORIENTED_EDGE('',*,*,#417405,.F.); +#417405 = EDGE_CURVE('',#417406,#417397,#417408,.T.); +#417406 = VERTEX_POINT('',#417407); +#417407 = CARTESIAN_POINT('',(130.675,-108.3875,0.)); +#417408 = LINE('',#417409,#417410); +#417409 = CARTESIAN_POINT('',(130.675,-108.3875,0.)); +#417410 = VECTOR('',#417411,1.); +#417411 = DIRECTION('',(0.,0.,-1.)); +#417412 = ORIENTED_EDGE('',*,*,#417413,.F.); +#417413 = EDGE_CURVE('',#417374,#417406,#417414,.T.); +#417414 = CIRCLE('',#417415,0.150000058649); +#417415 = AXIS2_PLACEMENT_3D('',#417416,#417417,#417418); +#417416 = CARTESIAN_POINT('',(130.67499994135,-108.2374999413,0.)); +#417417 = DIRECTION('',(0.,0.,-1.)); +#417418 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#417419 = CYLINDRICAL_SURFACE('',#417420,0.150000058649); +#417420 = AXIS2_PLACEMENT_3D('',#417421,#417422,#417423); +#417421 = CARTESIAN_POINT('',(130.67499994135,-108.2374999413,0.)); +#417422 = DIRECTION('',(-0.,-0.,1.)); +#417423 = DIRECTION('',(1.,-3.90995124759E-07,0.)); +#417424 = ADVANCED_FACE('',(#417425),#417450,.F.); +#417425 = FACE_BOUND('',#417426,.F.); +#417426 = EDGE_LOOP('',(#417427,#417428,#417436,#417444)); +#417427 = ORIENTED_EDGE('',*,*,#417405,.T.); +#417428 = ORIENTED_EDGE('',*,*,#417429,.T.); +#417429 = EDGE_CURVE('',#417397,#417430,#417432,.T.); +#417430 = VERTEX_POINT('',#417431); +#417431 = CARTESIAN_POINT('',(130.375,-108.3875,-4.E-02)); +#417432 = LINE('',#417433,#417434); +#417433 = CARTESIAN_POINT('',(130.675,-108.3875,-4.E-02)); +#417434 = VECTOR('',#417435,1.); +#417435 = DIRECTION('',(-1.,0.,0.)); +#417436 = ORIENTED_EDGE('',*,*,#417437,.F.); +#417437 = EDGE_CURVE('',#417438,#417430,#417440,.T.); +#417438 = VERTEX_POINT('',#417439); +#417439 = CARTESIAN_POINT('',(130.375,-108.3875,0.)); +#417440 = LINE('',#417441,#417442); +#417441 = CARTESIAN_POINT('',(130.375,-108.3875,0.)); +#417442 = VECTOR('',#417443,1.); +#417443 = DIRECTION('',(0.,0.,-1.)); +#417444 = ORIENTED_EDGE('',*,*,#417445,.F.); +#417445 = EDGE_CURVE('',#417406,#417438,#417446,.T.); +#417446 = LINE('',#417447,#417448); +#417447 = CARTESIAN_POINT('',(130.675,-108.3875,0.)); +#417448 = VECTOR('',#417449,1.); +#417449 = DIRECTION('',(-1.,0.,0.)); +#417450 = PLANE('',#417451); +#417451 = AXIS2_PLACEMENT_3D('',#417452,#417453,#417454); +#417452 = CARTESIAN_POINT('',(130.675,-108.3875,0.)); +#417453 = DIRECTION('',(0.,1.,0.)); +#417454 = DIRECTION('',(-1.,0.,0.)); +#417455 = ADVANCED_FACE('',(#417456),#417483,.T.); +#417456 = FACE_BOUND('',#417457,.F.); +#417457 = EDGE_LOOP('',(#417458,#417459,#417468,#417476)); +#417458 = ORIENTED_EDGE('',*,*,#417437,.T.); +#417459 = ORIENTED_EDGE('',*,*,#417460,.T.); +#417460 = EDGE_CURVE('',#417430,#417461,#417463,.T.); +#417461 = VERTEX_POINT('',#417462); +#417462 = CARTESIAN_POINT('',(130.225,-108.2375,-4.E-02)); +#417463 = CIRCLE('',#417464,0.150000058649); +#417464 = AXIS2_PLACEMENT_3D('',#417465,#417466,#417467); +#417465 = CARTESIAN_POINT('',(130.37500005864,-108.2374999413,-4.E-02)); +#417466 = DIRECTION('',(0.,0.,-1.)); +#417467 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#417468 = ORIENTED_EDGE('',*,*,#417469,.F.); +#417469 = EDGE_CURVE('',#417470,#417461,#417472,.T.); +#417470 = VERTEX_POINT('',#417471); +#417471 = CARTESIAN_POINT('',(130.225,-108.2375,0.)); +#417472 = LINE('',#417473,#417474); +#417473 = CARTESIAN_POINT('',(130.225,-108.2375,0.)); +#417474 = VECTOR('',#417475,1.); +#417475 = DIRECTION('',(0.,0.,-1.)); +#417476 = ORIENTED_EDGE('',*,*,#417477,.F.); +#417477 = EDGE_CURVE('',#417438,#417470,#417478,.T.); +#417478 = CIRCLE('',#417479,0.150000058649); +#417479 = AXIS2_PLACEMENT_3D('',#417480,#417481,#417482); +#417480 = CARTESIAN_POINT('',(130.37500005864,-108.2374999413,0.)); +#417481 = DIRECTION('',(0.,0.,-1.)); +#417482 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#417483 = CYLINDRICAL_SURFACE('',#417484,0.150000058649); +#417484 = AXIS2_PLACEMENT_3D('',#417485,#417486,#417487); +#417485 = CARTESIAN_POINT('',(130.37500005864,-108.2374999413,0.)); +#417486 = DIRECTION('',(-0.,-0.,1.)); +#417487 = DIRECTION('',(-3.909955984539E-07,-1.,-0.)); +#417488 = ADVANCED_FACE('',(#417489),#417505,.F.); +#417489 = FACE_BOUND('',#417490,.F.); +#417490 = EDGE_LOOP('',(#417491,#417492,#417498,#417499)); +#417491 = ORIENTED_EDGE('',*,*,#417469,.T.); +#417492 = ORIENTED_EDGE('',*,*,#417493,.T.); +#417493 = EDGE_CURVE('',#417461,#417261,#417494,.T.); +#417494 = LINE('',#417495,#417496); +#417495 = CARTESIAN_POINT('',(130.225,-108.2375,-4.E-02)); +#417496 = VECTOR('',#417497,1.); +#417497 = DIRECTION('',(0.,1.,0.)); +#417498 = ORIENTED_EDGE('',*,*,#417258,.F.); +#417499 = ORIENTED_EDGE('',*,*,#417500,.F.); +#417500 = EDGE_CURVE('',#417470,#417259,#417501,.T.); +#417501 = LINE('',#417502,#417503); +#417502 = CARTESIAN_POINT('',(130.225,-108.2375,0.)); +#417503 = VECTOR('',#417504,1.); +#417504 = DIRECTION('',(0.,1.,0.)); +#417505 = PLANE('',#417506); +#417506 = AXIS2_PLACEMENT_3D('',#417507,#417508,#417509); +#417507 = CARTESIAN_POINT('',(130.225,-108.2375,0.)); +#417508 = DIRECTION('',(1.,-0.,0.)); +#417509 = DIRECTION('',(0.,1.,0.)); +#417510 = ADVANCED_FACE('',(#417511),#417521,.F.); +#417511 = FACE_BOUND('',#417512,.F.); +#417512 = EDGE_LOOP('',(#417513,#417514,#417515,#417516,#417517,#417518, + #417519,#417520)); +#417513 = ORIENTED_EDGE('',*,*,#417285,.T.); +#417514 = ORIENTED_EDGE('',*,*,#417317,.T.); +#417515 = ORIENTED_EDGE('',*,*,#417349,.T.); +#417516 = ORIENTED_EDGE('',*,*,#417381,.T.); +#417517 = ORIENTED_EDGE('',*,*,#417413,.T.); +#417518 = ORIENTED_EDGE('',*,*,#417445,.T.); +#417519 = ORIENTED_EDGE('',*,*,#417477,.T.); +#417520 = ORIENTED_EDGE('',*,*,#417500,.T.); +#417521 = PLANE('',#417522); +#417522 = AXIS2_PLACEMENT_3D('',#417523,#417524,#417525); +#417523 = CARTESIAN_POINT('',(0.,0.,0.)); +#417524 = DIRECTION('',(-0.,-0.,-1.)); +#417525 = DIRECTION('',(-1.,0.,0.)); +#417526 = ADVANCED_FACE('',(#417527),#417537,.T.); +#417527 = FACE_BOUND('',#417528,.T.); +#417528 = EDGE_LOOP('',(#417529,#417530,#417531,#417532,#417533,#417534, + #417535,#417536)); +#417529 = ORIENTED_EDGE('',*,*,#417268,.T.); +#417530 = ORIENTED_EDGE('',*,*,#417301,.T.); +#417531 = ORIENTED_EDGE('',*,*,#417332,.T.); +#417532 = ORIENTED_EDGE('',*,*,#417365,.T.); +#417533 = ORIENTED_EDGE('',*,*,#417396,.T.); +#417534 = ORIENTED_EDGE('',*,*,#417429,.T.); +#417535 = ORIENTED_EDGE('',*,*,#417460,.T.); +#417536 = ORIENTED_EDGE('',*,*,#417493,.T.); +#417537 = PLANE('',#417538); +#417538 = AXIS2_PLACEMENT_3D('',#417539,#417540,#417541); +#417539 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#417540 = DIRECTION('',(-0.,-0.,-1.)); +#417541 = DIRECTION('',(-1.,0.,0.)); +#417542 = MANIFOLD_SOLID_BREP('',#417543); +#417543 = CLOSED_SHELL('',(#417544,#417577,#417597,#417617)); +#417544 = ADVANCED_FACE('',(#417545),#417572,.T.); +#417545 = FACE_BOUND('',#417546,.F.); +#417546 = EDGE_LOOP('',(#417547,#417557,#417564,#417565)); +#417547 = ORIENTED_EDGE('',*,*,#417548,.T.); +#417548 = EDGE_CURVE('',#417549,#417551,#417553,.T.); +#417549 = VERTEX_POINT('',#417550); +#417550 = CARTESIAN_POINT('',(126.7155,-127.5,1.51)); +#417551 = VERTEX_POINT('',#417552); +#417552 = CARTESIAN_POINT('',(126.7155,-127.5,1.55)); +#417553 = LINE('',#417554,#417555); +#417554 = CARTESIAN_POINT('',(126.7155,-127.5,1.51)); +#417555 = VECTOR('',#417556,1.); +#417556 = DIRECTION('',(0.,0.,1.)); +#417557 = ORIENTED_EDGE('',*,*,#417558,.T.); +#417558 = EDGE_CURVE('',#417551,#417551,#417559,.T.); +#417559 = CIRCLE('',#417560,0.7155); +#417560 = AXIS2_PLACEMENT_3D('',#417561,#417562,#417563); +#417561 = CARTESIAN_POINT('',(126.,-127.5,1.55)); +#417562 = DIRECTION('',(0.,0.,1.)); +#417563 = DIRECTION('',(1.,0.,-0.)); +#417564 = ORIENTED_EDGE('',*,*,#417548,.F.); +#417565 = ORIENTED_EDGE('',*,*,#417566,.F.); +#417566 = EDGE_CURVE('',#417549,#417549,#417567,.T.); +#417567 = CIRCLE('',#417568,0.7155); +#417568 = AXIS2_PLACEMENT_3D('',#417569,#417570,#417571); +#417569 = CARTESIAN_POINT('',(126.,-127.5,1.51)); +#417570 = DIRECTION('',(0.,0.,1.)); +#417571 = DIRECTION('',(1.,0.,-0.)); +#417572 = CYLINDRICAL_SURFACE('',#417573,0.7155); +#417573 = AXIS2_PLACEMENT_3D('',#417574,#417575,#417576); +#417574 = CARTESIAN_POINT('',(126.,-127.5,1.51)); +#417575 = DIRECTION('',(-0.,-0.,-1.)); +#417576 = DIRECTION('',(1.,0.,-0.)); +#417577 = ADVANCED_FACE('',(#417578,#417581),#417592,.F.); +#417578 = FACE_BOUND('',#417579,.F.); +#417579 = EDGE_LOOP('',(#417580)); +#417580 = ORIENTED_EDGE('',*,*,#417566,.T.); +#417581 = FACE_BOUND('',#417582,.F.); +#417582 = EDGE_LOOP('',(#417583)); +#417583 = ORIENTED_EDGE('',*,*,#417584,.T.); +#417584 = EDGE_CURVE('',#417585,#417585,#417587,.T.); +#417585 = VERTEX_POINT('',#417586); +#417586 = CARTESIAN_POINT('',(126.,-127.935,1.51)); +#417587 = CIRCLE('',#417588,0.435); +#417588 = AXIS2_PLACEMENT_3D('',#417589,#417590,#417591); +#417589 = CARTESIAN_POINT('',(126.,-127.5,1.51)); +#417590 = DIRECTION('',(-0.,0.,-1.)); +#417591 = DIRECTION('',(-0.,-1.,0.)); +#417592 = PLANE('',#417593); +#417593 = AXIS2_PLACEMENT_3D('',#417594,#417595,#417596); +#417594 = CARTESIAN_POINT('',(0.,0.,1.51)); +#417595 = DIRECTION('',(0.,0.,1.)); +#417596 = DIRECTION('',(1.,0.,-0.)); +#417597 = ADVANCED_FACE('',(#417598,#417601),#417612,.T.); +#417598 = FACE_BOUND('',#417599,.T.); +#417599 = EDGE_LOOP('',(#417600)); +#417600 = ORIENTED_EDGE('',*,*,#417558,.T.); +#417601 = FACE_BOUND('',#417602,.T.); +#417602 = EDGE_LOOP('',(#417603)); +#417603 = ORIENTED_EDGE('',*,*,#417604,.T.); +#417604 = EDGE_CURVE('',#417605,#417605,#417607,.T.); +#417605 = VERTEX_POINT('',#417606); +#417606 = CARTESIAN_POINT('',(126.,-127.935,1.55)); +#417607 = CIRCLE('',#417608,0.435); +#417608 = AXIS2_PLACEMENT_3D('',#417609,#417610,#417611); +#417609 = CARTESIAN_POINT('',(126.,-127.5,1.55)); +#417610 = DIRECTION('',(-0.,0.,-1.)); +#417611 = DIRECTION('',(-0.,-1.,0.)); +#417612 = PLANE('',#417613); +#417613 = AXIS2_PLACEMENT_3D('',#417614,#417615,#417616); +#417614 = CARTESIAN_POINT('',(0.,0.,1.55)); +#417615 = DIRECTION('',(0.,0.,1.)); +#417616 = DIRECTION('',(1.,0.,-0.)); +#417617 = ADVANCED_FACE('',(#417618),#417629,.F.); +#417618 = FACE_BOUND('',#417619,.T.); +#417619 = EDGE_LOOP('',(#417620,#417621,#417627,#417628)); +#417620 = ORIENTED_EDGE('',*,*,#417584,.T.); +#417621 = ORIENTED_EDGE('',*,*,#417622,.T.); +#417622 = EDGE_CURVE('',#417585,#417605,#417623,.T.); +#417623 = LINE('',#417624,#417625); +#417624 = CARTESIAN_POINT('',(126.,-127.935,-4.6E-02)); +#417625 = VECTOR('',#417626,1.); +#417626 = DIRECTION('',(0.,0.,1.)); +#417627 = ORIENTED_EDGE('',*,*,#417604,.F.); +#417628 = ORIENTED_EDGE('',*,*,#417622,.F.); +#417629 = CYLINDRICAL_SURFACE('',#417630,0.435); +#417630 = AXIS2_PLACEMENT_3D('',#417631,#417632,#417633); +#417631 = CARTESIAN_POINT('',(126.,-127.5,-4.6E-02)); +#417632 = DIRECTION('',(-0.,-0.,-1.)); +#417633 = DIRECTION('',(-0.,-1.,0.)); +#417634 = MANIFOLD_SOLID_BREP('',#417635); +#417635 = CLOSED_SHELL('',(#417636,#417669,#417689,#417709)); +#417636 = ADVANCED_FACE('',(#417637),#417664,.T.); +#417637 = FACE_BOUND('',#417638,.T.); +#417638 = EDGE_LOOP('',(#417639,#417649,#417656,#417657)); +#417639 = ORIENTED_EDGE('',*,*,#417640,.T.); +#417640 = EDGE_CURVE('',#417641,#417643,#417645,.T.); +#417641 = VERTEX_POINT('',#417642); +#417642 = CARTESIAN_POINT('',(126.7155,-127.5,0.)); +#417643 = VERTEX_POINT('',#417644); +#417644 = CARTESIAN_POINT('',(126.7155,-127.5,-4.E-02)); +#417645 = LINE('',#417646,#417647); +#417646 = CARTESIAN_POINT('',(126.7155,-127.5,0.)); +#417647 = VECTOR('',#417648,1.); +#417648 = DIRECTION('',(0.,0.,-1.)); +#417649 = ORIENTED_EDGE('',*,*,#417650,.T.); +#417650 = EDGE_CURVE('',#417643,#417643,#417651,.T.); +#417651 = CIRCLE('',#417652,0.7155); +#417652 = AXIS2_PLACEMENT_3D('',#417653,#417654,#417655); +#417653 = CARTESIAN_POINT('',(126.,-127.5,-4.E-02)); +#417654 = DIRECTION('',(0.,0.,1.)); +#417655 = DIRECTION('',(1.,0.,-0.)); +#417656 = ORIENTED_EDGE('',*,*,#417640,.F.); +#417657 = ORIENTED_EDGE('',*,*,#417658,.F.); +#417658 = EDGE_CURVE('',#417641,#417641,#417659,.T.); +#417659 = CIRCLE('',#417660,0.7155); +#417660 = AXIS2_PLACEMENT_3D('',#417661,#417662,#417663); +#417661 = CARTESIAN_POINT('',(126.,-127.5,0.)); +#417662 = DIRECTION('',(0.,0.,1.)); +#417663 = DIRECTION('',(1.,0.,-0.)); +#417664 = CYLINDRICAL_SURFACE('',#417665,0.7155); +#417665 = AXIS2_PLACEMENT_3D('',#417666,#417667,#417668); +#417666 = CARTESIAN_POINT('',(126.,-127.5,0.)); +#417667 = DIRECTION('',(0.,0.,1.)); +#417668 = DIRECTION('',(1.,0.,-0.)); +#417669 = ADVANCED_FACE('',(#417670,#417673),#417684,.F.); +#417670 = FACE_BOUND('',#417671,.F.); +#417671 = EDGE_LOOP('',(#417672)); +#417672 = ORIENTED_EDGE('',*,*,#417658,.F.); +#417673 = FACE_BOUND('',#417674,.F.); +#417674 = EDGE_LOOP('',(#417675)); +#417675 = ORIENTED_EDGE('',*,*,#417676,.F.); +#417676 = EDGE_CURVE('',#417677,#417677,#417679,.T.); +#417677 = VERTEX_POINT('',#417678); +#417678 = CARTESIAN_POINT('',(126.,-127.935,0.)); +#417679 = CIRCLE('',#417680,0.435); +#417680 = AXIS2_PLACEMENT_3D('',#417681,#417682,#417683); +#417681 = CARTESIAN_POINT('',(126.,-127.5,0.)); +#417682 = DIRECTION('',(-0.,0.,-1.)); +#417683 = DIRECTION('',(-0.,-1.,0.)); +#417684 = PLANE('',#417685); +#417685 = AXIS2_PLACEMENT_3D('',#417686,#417687,#417688); +#417686 = CARTESIAN_POINT('',(0.,0.,0.)); +#417687 = DIRECTION('',(-0.,-0.,-1.)); +#417688 = DIRECTION('',(-1.,0.,0.)); +#417689 = ADVANCED_FACE('',(#417690,#417693),#417704,.T.); +#417690 = FACE_BOUND('',#417691,.T.); +#417691 = EDGE_LOOP('',(#417692)); +#417692 = ORIENTED_EDGE('',*,*,#417650,.F.); +#417693 = FACE_BOUND('',#417694,.T.); +#417694 = EDGE_LOOP('',(#417695)); +#417695 = ORIENTED_EDGE('',*,*,#417696,.F.); +#417696 = EDGE_CURVE('',#417697,#417697,#417699,.T.); +#417697 = VERTEX_POINT('',#417698); +#417698 = CARTESIAN_POINT('',(126.,-127.935,-4.E-02)); +#417699 = CIRCLE('',#417700,0.435); +#417700 = AXIS2_PLACEMENT_3D('',#417701,#417702,#417703); +#417701 = CARTESIAN_POINT('',(126.,-127.5,-4.E-02)); +#417702 = DIRECTION('',(-0.,0.,-1.)); +#417703 = DIRECTION('',(-0.,-1.,0.)); +#417704 = PLANE('',#417705); +#417705 = AXIS2_PLACEMENT_3D('',#417706,#417707,#417708); +#417706 = CARTESIAN_POINT('',(0.,0.,-4.E-02)); +#417707 = DIRECTION('',(-0.,-0.,-1.)); +#417708 = DIRECTION('',(-1.,0.,0.)); +#417709 = ADVANCED_FACE('',(#417710),#417721,.F.); +#417710 = FACE_BOUND('',#417711,.T.); +#417711 = EDGE_LOOP('',(#417712,#417713,#417719,#417720)); +#417712 = ORIENTED_EDGE('',*,*,#417696,.T.); +#417713 = ORIENTED_EDGE('',*,*,#417714,.T.); +#417714 = EDGE_CURVE('',#417697,#417677,#417715,.T.); +#417715 = LINE('',#417716,#417717); +#417716 = CARTESIAN_POINT('',(126.,-127.935,-4.6E-02)); +#417717 = VECTOR('',#417718,1.); +#417718 = DIRECTION('',(0.,0.,1.)); +#417719 = ORIENTED_EDGE('',*,*,#417676,.F.); +#417720 = ORIENTED_EDGE('',*,*,#417714,.F.); +#417721 = CYLINDRICAL_SURFACE('',#417722,0.435); +#417722 = AXIS2_PLACEMENT_3D('',#417723,#417724,#417725); +#417723 = CARTESIAN_POINT('',(126.,-127.5,-4.6E-02)); +#417724 = DIRECTION('',(-0.,-0.,-1.)); +#417725 = DIRECTION('',(-0.,-1.,0.)); +#417726 = MANIFOLD_SOLID_BREP('',#417727); +#417727 = CLOSED_SHELL('',(#417728,#417761,#417781,#417801)); +#417728 = ADVANCED_FACE('',(#417729),#417756,.T.); +#417729 = FACE_BOUND('',#417730,.F.); +#417730 = EDGE_LOOP('',(#417731,#417741,#417748,#417749)); +#417731 = ORIENTED_EDGE('',*,*,#417732,.T.); +#417732 = EDGE_CURVE('',#417733,#417735,#417737,.T.); +#417733 = VERTEX_POINT('',#417734); +#417734 = CARTESIAN_POINT('',(126.,-127.96,-4.E-02)); +#417735 = VERTEX_POINT('',#417736); +#417736 = CARTESIAN_POINT('',(126.,-127.96,1.55)); +#417737 = LINE('',#417738,#417739); +#417738 = CARTESIAN_POINT('',(126.,-127.96,-4.E-02)); +#417739 = VECTOR('',#417740,1.); +#417740 = DIRECTION('',(0.,0.,1.)); +#417741 = ORIENTED_EDGE('',*,*,#417742,.T.); +#417742 = EDGE_CURVE('',#417735,#417735,#417743,.T.); +#417743 = CIRCLE('',#417744,0.46); +#417744 = AXIS2_PLACEMENT_3D('',#417745,#417746,#417747); +#417745 = CARTESIAN_POINT('',(126.,-127.5,1.55)); +#417746 = DIRECTION('',(0.,0.,1.)); +#417747 = DIRECTION('',(-0.,-1.,0.)); +#417748 = ORIENTED_EDGE('',*,*,#417732,.F.); +#417749 = ORIENTED_EDGE('',*,*,#417750,.F.); +#417750 = EDGE_CURVE('',#417733,#417733,#417751,.T.); +#417751 = CIRCLE('',#417752,0.46); +#417752 = AXIS2_PLACEMENT_3D('',#417753,#417754,#417755); +#417753 = CARTESIAN_POINT('',(126.,-127.5,-4.E-02)); +#417754 = DIRECTION('',(0.,0.,1.)); +#417755 = DIRECTION('',(-0.,-1.,0.)); +#417756 = CYLINDRICAL_SURFACE('',#417757,0.46); +#417757 = AXIS2_PLACEMENT_3D('',#417758,#417759,#417760); +#417758 = CARTESIAN_POINT('',(126.,-127.5,-4.E-02)); +#417759 = DIRECTION('',(-0.,-0.,-1.)); +#417760 = DIRECTION('',(-0.,-1.,0.)); +#417761 = ADVANCED_FACE('',(#417762,#417765),#417776,.F.); +#417762 = FACE_BOUND('',#417763,.F.); +#417763 = EDGE_LOOP('',(#417764)); +#417764 = ORIENTED_EDGE('',*,*,#417750,.T.); +#417765 = FACE_BOUND('',#417766,.F.); +#417766 = EDGE_LOOP('',(#417767)); +#417767 = ORIENTED_EDGE('',*,*,#417768,.T.); +#417768 = EDGE_CURVE('',#417769,#417769,#417771,.T.); +#417769 = VERTEX_POINT('',#417770); +#417770 = CARTESIAN_POINT('',(126.,-127.935,-4.E-02)); +#417771 = CIRCLE('',#417772,0.435); +#417772 = AXIS2_PLACEMENT_3D('',#417773,#417774,#417775); +#417773 = CARTESIAN_POINT('',(126.,-127.5,-4.E-02)); +#417774 = DIRECTION('',(-0.,0.,-1.)); +#417775 = DIRECTION('',(-0.,-1.,0.)); +#417776 = PLANE('',#417777); +#417777 = AXIS2_PLACEMENT_3D('',#417778,#417779,#417780); +#417778 = CARTESIAN_POINT('',(126.,-127.96,-4.E-02)); +#417779 = DIRECTION('',(0.,0.,1.)); +#417780 = DIRECTION('',(1.,0.,-0.)); +#417781 = ADVANCED_FACE('',(#417782,#417785),#417796,.T.); +#417782 = FACE_BOUND('',#417783,.T.); +#417783 = EDGE_LOOP('',(#417784)); +#417784 = ORIENTED_EDGE('',*,*,#417742,.T.); +#417785 = FACE_BOUND('',#417786,.T.); +#417786 = EDGE_LOOP('',(#417787)); +#417787 = ORIENTED_EDGE('',*,*,#417788,.T.); +#417788 = EDGE_CURVE('',#417789,#417789,#417791,.T.); +#417789 = VERTEX_POINT('',#417790); +#417790 = CARTESIAN_POINT('',(126.,-127.935,1.55)); +#417791 = CIRCLE('',#417792,0.435); +#417792 = AXIS2_PLACEMENT_3D('',#417793,#417794,#417795); +#417793 = CARTESIAN_POINT('',(126.,-127.5,1.55)); +#417794 = DIRECTION('',(-0.,0.,-1.)); +#417795 = DIRECTION('',(-0.,-1.,0.)); +#417796 = PLANE('',#417797); +#417797 = AXIS2_PLACEMENT_3D('',#417798,#417799,#417800); +#417798 = CARTESIAN_POINT('',(126.,-127.96,1.55)); +#417799 = DIRECTION('',(0.,0.,1.)); +#417800 = DIRECTION('',(1.,0.,-0.)); +#417801 = ADVANCED_FACE('',(#417802),#417813,.F.); +#417802 = FACE_BOUND('',#417803,.T.); +#417803 = EDGE_LOOP('',(#417804,#417805,#417811,#417812)); +#417804 = ORIENTED_EDGE('',*,*,#417768,.T.); +#417805 = ORIENTED_EDGE('',*,*,#417806,.T.); +#417806 = EDGE_CURVE('',#417769,#417789,#417807,.T.); +#417807 = LINE('',#417808,#417809); +#417808 = CARTESIAN_POINT('',(126.,-127.935,-4.6E-02)); +#417809 = VECTOR('',#417810,1.); +#417810 = DIRECTION('',(0.,0.,1.)); +#417811 = ORIENTED_EDGE('',*,*,#417788,.F.); +#417812 = ORIENTED_EDGE('',*,*,#417806,.F.); +#417813 = CYLINDRICAL_SURFACE('',#417814,0.435); +#417814 = AXIS2_PLACEMENT_3D('',#417815,#417816,#417817); +#417815 = CARTESIAN_POINT('',(126.,-127.5,-4.6E-02)); +#417816 = DIRECTION('',(-0.,-0.,-1.)); +#417817 = DIRECTION('',(-0.,-1.,0.)); +#417818 = MANIFOLD_SOLID_BREP('',#417819); +#417819 = CLOSED_SHELL('',(#417820,#417860,#417891,#417922,#417944, + #417956)); +#417820 = ADVANCED_FACE('',(#417821),#417855,.T.); +#417821 = FACE_BOUND('',#417822,.T.); +#417822 = EDGE_LOOP('',(#417823,#417833,#417841,#417849)); +#417823 = ORIENTED_EDGE('',*,*,#417824,.T.); +#417824 = EDGE_CURVE('',#417825,#417827,#417829,.T.); +#417825 = VERTEX_POINT('',#417826); +#417826 = CARTESIAN_POINT('',(146.,-71.45,1.51)); +#417827 = VERTEX_POINT('',#417828); +#417828 = CARTESIAN_POINT('',(146.,-71.45,1.55)); +#417829 = LINE('',#417830,#417831); +#417830 = CARTESIAN_POINT('',(146.,-71.45,1.51)); +#417831 = VECTOR('',#417832,1.); +#417832 = DIRECTION('',(0.,0.,1.)); +#417833 = ORIENTED_EDGE('',*,*,#417834,.T.); +#417834 = EDGE_CURVE('',#417827,#417835,#417837,.T.); +#417835 = VERTEX_POINT('',#417836); +#417836 = CARTESIAN_POINT('',(146.,-70.55,1.55)); +#417837 = LINE('',#417838,#417839); +#417838 = CARTESIAN_POINT('',(146.,-71.45,1.55)); +#417839 = VECTOR('',#417840,1.); +#417840 = DIRECTION('',(0.,1.,0.)); +#417841 = ORIENTED_EDGE('',*,*,#417842,.F.); +#417842 = EDGE_CURVE('',#417843,#417835,#417845,.T.); +#417843 = VERTEX_POINT('',#417844); +#417844 = CARTESIAN_POINT('',(146.,-70.55,1.51)); +#417845 = LINE('',#417846,#417847); +#417846 = CARTESIAN_POINT('',(146.,-70.55,1.51)); +#417847 = VECTOR('',#417848,1.); +#417848 = DIRECTION('',(0.,0.,1.)); +#417849 = ORIENTED_EDGE('',*,*,#417850,.F.); +#417850 = EDGE_CURVE('',#417825,#417843,#417851,.T.); +#417851 = LINE('',#417852,#417853); +#417852 = CARTESIAN_POINT('',(146.,-71.45,1.51)); +#417853 = VECTOR('',#417854,1.); +#417854 = DIRECTION('',(0.,1.,0.)); +#417855 = PLANE('',#417856); +#417856 = AXIS2_PLACEMENT_3D('',#417857,#417858,#417859); +#417857 = CARTESIAN_POINT('',(146.,-71.45,1.51)); +#417858 = DIRECTION('',(-1.,0.,0.)); +#417859 = DIRECTION('',(0.,1.,0.)); +#417860 = ADVANCED_FACE('',(#417861),#417886,.T.); +#417861 = FACE_BOUND('',#417862,.T.); +#417862 = EDGE_LOOP('',(#417863,#417864,#417872,#417880)); +#417863 = ORIENTED_EDGE('',*,*,#417842,.T.); +#417864 = ORIENTED_EDGE('',*,*,#417865,.T.); +#417865 = EDGE_CURVE('',#417835,#417866,#417868,.T.); +#417866 = VERTEX_POINT('',#417867); +#417867 = CARTESIAN_POINT('',(147.5,-70.55,1.55)); +#417868 = LINE('',#417869,#417870); +#417869 = CARTESIAN_POINT('',(146.,-70.55,1.55)); +#417870 = VECTOR('',#417871,1.); +#417871 = DIRECTION('',(1.,0.,0.)); +#417872 = ORIENTED_EDGE('',*,*,#417873,.F.); +#417873 = EDGE_CURVE('',#417874,#417866,#417876,.T.); +#417874 = VERTEX_POINT('',#417875); +#417875 = CARTESIAN_POINT('',(147.5,-70.55,1.51)); +#417876 = LINE('',#417877,#417878); +#417877 = CARTESIAN_POINT('',(147.5,-70.55,1.51)); +#417878 = VECTOR('',#417879,1.); +#417879 = DIRECTION('',(0.,0.,1.)); +#417880 = ORIENTED_EDGE('',*,*,#417881,.F.); +#417881 = EDGE_CURVE('',#417843,#417874,#417882,.T.); +#417882 = LINE('',#417883,#417884); +#417883 = CARTESIAN_POINT('',(146.,-70.55,1.51)); +#417884 = VECTOR('',#417885,1.); +#417885 = DIRECTION('',(1.,0.,0.)); +#417886 = PLANE('',#417887); +#417887 = AXIS2_PLACEMENT_3D('',#417888,#417889,#417890); +#417888 = CARTESIAN_POINT('',(146.,-70.55,1.51)); +#417889 = DIRECTION('',(0.,1.,0.)); +#417890 = DIRECTION('',(1.,0.,0.)); +#417891 = ADVANCED_FACE('',(#417892),#417917,.T.); +#417892 = FACE_BOUND('',#417893,.T.); +#417893 = EDGE_LOOP('',(#417894,#417895,#417903,#417911)); +#417894 = ORIENTED_EDGE('',*,*,#417873,.T.); +#417895 = ORIENTED_EDGE('',*,*,#417896,.T.); +#417896 = EDGE_CURVE('',#417866,#417897,#417899,.T.); +#417897 = VERTEX_POINT('',#417898); +#417898 = CARTESIAN_POINT('',(147.5,-71.45,1.55)); +#417899 = LINE('',#417900,#417901); +#417900 = CARTESIAN_POINT('',(147.5,-70.55,1.55)); +#417901 = VECTOR('',#417902,1.); +#417902 = DIRECTION('',(0.,-1.,0.)); +#417903 = ORIENTED_EDGE('',*,*,#417904,.F.); +#417904 = EDGE_CURVE('',#417905,#417897,#417907,.T.); +#417905 = VERTEX_POINT('',#417906); +#417906 = CARTESIAN_POINT('',(147.5,-71.45,1.51)); +#417907 = LINE('',#417908,#417909); +#417908 = CARTESIAN_POINT('',(147.5,-71.45,1.51)); +#417909 = VECTOR('',#417910,1.); +#417910 = DIRECTION('',(0.,0.,1.)); +#417911 = ORIENTED_EDGE('',*,*,#417912,.F.); +#417912 = EDGE_CURVE('',#417874,#417905,#417913,.T.); +#417913 = LINE('',#417914,#417915); +#417914 = CARTESIAN_POINT('',(147.5,-70.55,1.51)); +#417915 = VECTOR('',#417916,1.); +#417916 = DIRECTION('',(0.,-1.,0.)); +#417917 = PLANE('',#417918); +#417918 = AXIS2_PLACEMENT_3D('',#417919,#417920,#417921); +#417919 = CARTESIAN_POINT('',(147.5,-70.55,1.51)); +#417920 = DIRECTION('',(1.,0.,-0.)); +#417921 = DIRECTION('',(0.,-1.,0.)); +#417922 = ADVANCED_FACE('',(#417923),#417939,.T.); +#417923 = FACE_BOUND('',#417924,.T.); +#417924 = EDGE_LOOP('',(#417925,#417926,#417932,#417933)); +#417925 = ORIENTED_EDGE('',*,*,#417904,.T.); +#417926 = ORIENTED_EDGE('',*,*,#417927,.T.); +#417927 = EDGE_CURVE('',#417897,#417827,#417928,.T.); +#417928 = LINE('',#417929,#417930); +#417929 = CARTESIAN_POINT('',(147.5,-71.45,1.55)); +#417930 = VECTOR('',#417931,1.); +#417931 = DIRECTION('',(-1.,0.,0.)); +#417932 = ORIENTED_EDGE('',*,*,#417824,.F.); +#417933 = ORIENTED_EDGE('',*,*,#417934,.F.); +#417934 = EDGE_CURVE('',#417905,#417825,#417935,.T.); +#417935 = LINE('',#417936,#417937); +#417936 = CARTESIAN_POINT('',(147.5,-71.45,1.51)); +#417937 = VECTOR('',#417938,1.); +#417938 = DIRECTION('',(-1.,0.,0.)); +#417939 = PLANE('',#417940); +#417940 = AXIS2_PLACEMENT_3D('',#417941,#417942,#417943); +#417941 = CARTESIAN_POINT('',(147.5,-71.45,1.51)); +#417942 = DIRECTION('',(0.,-1.,0.)); +#417943 = DIRECTION('',(-1.,0.,0.)); +#417944 = ADVANCED_FACE('',(#417945),#417951,.F.); +#417945 = FACE_BOUND('',#417946,.T.); +#417946 = EDGE_LOOP('',(#417947,#417948,#417949,#417950)); +#417947 = ORIENTED_EDGE('',*,*,#417850,.T.); +#417948 = ORIENTED_EDGE('',*,*,#417881,.T.); +#417949 = ORIENTED_EDGE('',*,*,#417912,.T.); +#417950 = ORIENTED_EDGE('',*,*,#417934,.T.); +#417951 = PLANE('',#417952); +#417952 = AXIS2_PLACEMENT_3D('',#417953,#417954,#417955); +#417953 = CARTESIAN_POINT('',(0.,0.,1.51)); +#417954 = DIRECTION('',(0.,0.,1.)); +#417955 = DIRECTION('',(1.,0.,-0.)); +#417956 = ADVANCED_FACE('',(#417957),#417963,.T.); +#417957 = FACE_BOUND('',#417958,.F.); +#417958 = EDGE_LOOP('',(#417959,#417960,#417961,#417962)); +#417959 = ORIENTED_EDGE('',*,*,#417834,.T.); +#417960 = ORIENTED_EDGE('',*,*,#417865,.T.); +#417961 = ORIENTED_EDGE('',*,*,#417896,.T.); +#417962 = ORIENTED_EDGE('',*,*,#417927,.T.); +#417963 = PLANE('',#417964); +#417964 = AXIS2_PLACEMENT_3D('',#417965,#417966,#417967); +#417965 = CARTESIAN_POINT('',(0.,0.,1.55)); +#417966 = DIRECTION('',(0.,0.,1.)); +#417967 = DIRECTION('',(1.,0.,-0.)); +#417968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#417972)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#417969,#417970,#417971)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#417969 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#417970 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#417971 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#417972 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#417969, + 'distance_accuracy_value','confusion accuracy'); +#417973 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#417974,#417976); +#417974 = ( REPRESENTATION_RELATIONSHIP('','',#326354,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#417975) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#417975 = ITEM_DEFINED_TRANSFORMATION('','',#11,#359); +#417976 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #417977); +#417977 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('113','=>[0:1:1:52]','',#5, + #326349,$); +#417978 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#326351)); +#417979 = SHAPE_DEFINITION_REPRESENTATION(#417980,#417986); +#417980 = PRODUCT_DEFINITION_SHAPE('','',#417981); +#417981 = PRODUCT_DEFINITION('design','',#417982,#417985); +#417982 = PRODUCT_DEFINITION_FORMATION('','',#417983); +#417983 = PRODUCT('snips_controller-unsaved-export-kiHHnP_via', + 'snips_controller-unsaved-export-kiHHnP_via','',(#417984)); +#417984 = PRODUCT_CONTEXT('',#2,'mechanical'); +#417985 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#417986 = SHAPE_REPRESENTATION('',(#11,#417987,#418079,#418171,#418263, + #418355,#418447,#418539,#418631,#418723,#418815,#418907,#418999, + #419091,#419183,#419275,#419367,#419459,#419551,#419643,#419735, + #419827,#419919,#420011,#420103,#420195,#420287,#420379,#420471, + #420563,#420655,#420747,#420839,#420931,#421023,#421115,#421207, + #421299,#421391,#421483,#421575,#421667,#421759,#421851,#421943, + #422035,#422127,#422219,#422311,#422403,#422495,#422587,#422679, + #422771,#422863,#422955,#423047,#423139,#423231,#423323,#423415, + #423507,#423599,#423691,#423783,#423875,#423967,#424059,#424151, + #424243,#424335,#424427,#424519,#424611,#424703,#424795,#424887, + #424979,#425071,#425163,#425255,#425347,#425439,#425531,#425623, + #425715,#425807,#425899,#425991,#426083,#426175,#426267,#426359, + #426451,#426543,#426635,#426727,#426819,#426911,#427003,#427095, + #427187,#427279,#427371,#427463,#427555,#427647,#427739,#427831, + #427923,#428015,#428107,#428199,#428291,#428383,#428475,#428567, + #428659,#428751,#428843,#428935,#429027,#429119,#429211,#429303, + #429395,#429487,#429579,#429671,#429763,#429855),#429947); +#417987 = MANIFOLD_SOLID_BREP('',#417988); +#417988 = CLOSED_SHELL('',(#417989,#418022,#418042,#418062)); +#417989 = ADVANCED_FACE('',(#417990),#418017,.T.); +#417990 = FACE_BOUND('',#417991,.F.); +#417991 = EDGE_LOOP('',(#417992,#418002,#418009,#418010)); +#417992 = ORIENTED_EDGE('',*,*,#417993,.T.); +#417993 = EDGE_CURVE('',#417994,#417996,#417998,.T.); +#417994 = VERTEX_POINT('',#417995); +#417995 = CARTESIAN_POINT('',(130.95,-77.35,-3.5E-02)); +#417996 = VERTEX_POINT('',#417997); +#417997 = CARTESIAN_POINT('',(130.95,-77.35,1.545)); +#417998 = LINE('',#417999,#418000); +#417999 = CARTESIAN_POINT('',(130.95,-77.35,-3.5E-02)); +#418000 = VECTOR('',#418001,1.); +#418001 = DIRECTION('',(0.,0.,1.)); +#418002 = ORIENTED_EDGE('',*,*,#418003,.T.); +#418003 = EDGE_CURVE('',#417996,#417996,#418004,.T.); +#418004 = CIRCLE('',#418005,0.15); +#418005 = AXIS2_PLACEMENT_3D('',#418006,#418007,#418008); +#418006 = CARTESIAN_POINT('',(130.95,-77.2,1.545)); +#418007 = DIRECTION('',(0.,0.,1.)); +#418008 = DIRECTION('',(-0.,-1.,0.)); +#418009 = ORIENTED_EDGE('',*,*,#417993,.F.); +#418010 = ORIENTED_EDGE('',*,*,#418011,.F.); +#418011 = EDGE_CURVE('',#417994,#417994,#418012,.T.); +#418012 = CIRCLE('',#418013,0.15); +#418013 = AXIS2_PLACEMENT_3D('',#418014,#418015,#418016); +#418014 = CARTESIAN_POINT('',(130.95,-77.2,-3.5E-02)); +#418015 = DIRECTION('',(0.,0.,1.)); +#418016 = DIRECTION('',(-0.,-1.,0.)); +#418017 = CYLINDRICAL_SURFACE('',#418018,0.15); +#418018 = AXIS2_PLACEMENT_3D('',#418019,#418020,#418021); +#418019 = CARTESIAN_POINT('',(130.95,-77.2,-3.5E-02)); +#418020 = DIRECTION('',(-0.,-0.,-1.)); +#418021 = DIRECTION('',(-0.,-1.,0.)); +#418022 = ADVANCED_FACE('',(#418023,#418026),#418037,.F.); +#418023 = FACE_BOUND('',#418024,.F.); +#418024 = EDGE_LOOP('',(#418025)); +#418025 = ORIENTED_EDGE('',*,*,#418011,.T.); +#418026 = FACE_BOUND('',#418027,.F.); +#418027 = EDGE_LOOP('',(#418028)); +#418028 = ORIENTED_EDGE('',*,*,#418029,.T.); +#418029 = EDGE_CURVE('',#418030,#418030,#418032,.T.); +#418030 = VERTEX_POINT('',#418031); +#418031 = CARTESIAN_POINT('',(130.95,-77.325,-3.5E-02)); +#418032 = CIRCLE('',#418033,0.125); +#418033 = AXIS2_PLACEMENT_3D('',#418034,#418035,#418036); +#418034 = CARTESIAN_POINT('',(130.95,-77.2,-3.5E-02)); +#418035 = DIRECTION('',(-0.,0.,-1.)); +#418036 = DIRECTION('',(-0.,-1.,0.)); +#418037 = PLANE('',#418038); +#418038 = AXIS2_PLACEMENT_3D('',#418039,#418040,#418041); +#418039 = CARTESIAN_POINT('',(130.95,-77.35,-3.5E-02)); +#418040 = DIRECTION('',(0.,0.,1.)); +#418041 = DIRECTION('',(1.,0.,-0.)); +#418042 = ADVANCED_FACE('',(#418043,#418046),#418057,.T.); +#418043 = FACE_BOUND('',#418044,.T.); +#418044 = EDGE_LOOP('',(#418045)); +#418045 = ORIENTED_EDGE('',*,*,#418003,.T.); +#418046 = FACE_BOUND('',#418047,.T.); +#418047 = EDGE_LOOP('',(#418048)); +#418048 = ORIENTED_EDGE('',*,*,#418049,.T.); +#418049 = EDGE_CURVE('',#418050,#418050,#418052,.T.); +#418050 = VERTEX_POINT('',#418051); +#418051 = CARTESIAN_POINT('',(130.95,-77.325,1.545)); +#418052 = CIRCLE('',#418053,0.125); +#418053 = AXIS2_PLACEMENT_3D('',#418054,#418055,#418056); +#418054 = CARTESIAN_POINT('',(130.95,-77.2,1.545)); +#418055 = DIRECTION('',(-0.,0.,-1.)); +#418056 = DIRECTION('',(-0.,-1.,0.)); +#418057 = PLANE('',#418058); +#418058 = AXIS2_PLACEMENT_3D('',#418059,#418060,#418061); +#418059 = CARTESIAN_POINT('',(130.95,-77.35,1.545)); +#418060 = DIRECTION('',(0.,0.,1.)); +#418061 = DIRECTION('',(1.,0.,-0.)); +#418062 = ADVANCED_FACE('',(#418063),#418074,.F.); +#418063 = FACE_BOUND('',#418064,.T.); +#418064 = EDGE_LOOP('',(#418065,#418066,#418072,#418073)); +#418065 = ORIENTED_EDGE('',*,*,#418029,.T.); +#418066 = ORIENTED_EDGE('',*,*,#418067,.T.); +#418067 = EDGE_CURVE('',#418030,#418050,#418068,.T.); +#418068 = LINE('',#418069,#418070); +#418069 = CARTESIAN_POINT('',(130.95,-77.325,-3.6E-02)); +#418070 = VECTOR('',#418071,1.); +#418071 = DIRECTION('',(0.,0.,1.)); +#418072 = ORIENTED_EDGE('',*,*,#418049,.F.); +#418073 = ORIENTED_EDGE('',*,*,#418067,.F.); +#418074 = CYLINDRICAL_SURFACE('',#418075,0.125); +#418075 = AXIS2_PLACEMENT_3D('',#418076,#418077,#418078); +#418076 = CARTESIAN_POINT('',(130.95,-77.2,-3.6E-02)); +#418077 = DIRECTION('',(-0.,-0.,-1.)); +#418078 = DIRECTION('',(-0.,-1.,0.)); +#418079 = MANIFOLD_SOLID_BREP('',#418080); +#418080 = CLOSED_SHELL('',(#418081,#418114,#418134,#418154)); +#418081 = ADVANCED_FACE('',(#418082),#418109,.T.); +#418082 = FACE_BOUND('',#418083,.F.); +#418083 = EDGE_LOOP('',(#418084,#418094,#418101,#418102)); +#418084 = ORIENTED_EDGE('',*,*,#418085,.T.); +#418085 = EDGE_CURVE('',#418086,#418088,#418090,.T.); +#418086 = VERTEX_POINT('',#418087); +#418087 = CARTESIAN_POINT('',(127.624265,-74.325735,-3.5E-02)); +#418088 = VERTEX_POINT('',#418089); +#418089 = CARTESIAN_POINT('',(127.624265,-74.325735,1.545)); +#418090 = LINE('',#418091,#418092); +#418091 = CARTESIAN_POINT('',(127.624265,-74.325735,-3.5E-02)); +#418092 = VECTOR('',#418093,1.); +#418093 = DIRECTION('',(0.,0.,1.)); +#418094 = ORIENTED_EDGE('',*,*,#418095,.T.); +#418095 = EDGE_CURVE('',#418088,#418088,#418096,.T.); +#418096 = CIRCLE('',#418097,0.15); +#418097 = AXIS2_PLACEMENT_3D('',#418098,#418099,#418100); +#418098 = CARTESIAN_POINT('',(127.624265,-74.175735,1.545)); +#418099 = DIRECTION('',(0.,0.,1.)); +#418100 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#418101 = ORIENTED_EDGE('',*,*,#418085,.F.); +#418102 = ORIENTED_EDGE('',*,*,#418103,.F.); +#418103 = EDGE_CURVE('',#418086,#418086,#418104,.T.); +#418104 = CIRCLE('',#418105,0.15); +#418105 = AXIS2_PLACEMENT_3D('',#418106,#418107,#418108); +#418106 = CARTESIAN_POINT('',(127.624265,-74.175735,-3.5E-02)); +#418107 = DIRECTION('',(0.,0.,1.)); +#418108 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#418109 = CYLINDRICAL_SURFACE('',#418110,0.15); +#418110 = AXIS2_PLACEMENT_3D('',#418111,#418112,#418113); +#418111 = CARTESIAN_POINT('',(127.624265,-74.175735,-3.5E-02)); +#418112 = DIRECTION('',(-0.,-0.,-1.)); +#418113 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#418114 = ADVANCED_FACE('',(#418115,#418118),#418129,.F.); +#418115 = FACE_BOUND('',#418116,.F.); +#418116 = EDGE_LOOP('',(#418117)); +#418117 = ORIENTED_EDGE('',*,*,#418103,.T.); +#418118 = FACE_BOUND('',#418119,.F.); +#418119 = EDGE_LOOP('',(#418120)); +#418120 = ORIENTED_EDGE('',*,*,#418121,.T.); +#418121 = EDGE_CURVE('',#418122,#418122,#418124,.T.); +#418122 = VERTEX_POINT('',#418123); +#418123 = CARTESIAN_POINT('',(127.624265,-74.300735,-3.5E-02)); +#418124 = CIRCLE('',#418125,0.125); +#418125 = AXIS2_PLACEMENT_3D('',#418126,#418127,#418128); +#418126 = CARTESIAN_POINT('',(127.624265,-74.175735,-3.5E-02)); +#418127 = DIRECTION('',(-0.,0.,-1.)); +#418128 = DIRECTION('',(-0.,-1.,0.)); +#418129 = PLANE('',#418130); +#418130 = AXIS2_PLACEMENT_3D('',#418131,#418132,#418133); +#418131 = CARTESIAN_POINT('',(127.624265,-74.325735,-3.5E-02)); +#418132 = DIRECTION('',(0.,0.,1.)); +#418133 = DIRECTION('',(1.,0.,-0.)); +#418134 = ADVANCED_FACE('',(#418135,#418138),#418149,.T.); +#418135 = FACE_BOUND('',#418136,.T.); +#418136 = EDGE_LOOP('',(#418137)); +#418137 = ORIENTED_EDGE('',*,*,#418095,.T.); +#418138 = FACE_BOUND('',#418139,.T.); +#418139 = EDGE_LOOP('',(#418140)); +#418140 = ORIENTED_EDGE('',*,*,#418141,.T.); +#418141 = EDGE_CURVE('',#418142,#418142,#418144,.T.); +#418142 = VERTEX_POINT('',#418143); +#418143 = CARTESIAN_POINT('',(127.624265,-74.300735,1.545)); +#418144 = CIRCLE('',#418145,0.125); +#418145 = AXIS2_PLACEMENT_3D('',#418146,#418147,#418148); +#418146 = CARTESIAN_POINT('',(127.624265,-74.175735,1.545)); +#418147 = DIRECTION('',(-0.,0.,-1.)); +#418148 = DIRECTION('',(-0.,-1.,0.)); +#418149 = PLANE('',#418150); +#418150 = AXIS2_PLACEMENT_3D('',#418151,#418152,#418153); +#418151 = CARTESIAN_POINT('',(127.624265,-74.325735,1.545)); +#418152 = DIRECTION('',(0.,0.,1.)); +#418153 = DIRECTION('',(1.,0.,-0.)); +#418154 = ADVANCED_FACE('',(#418155),#418166,.F.); +#418155 = FACE_BOUND('',#418156,.T.); +#418156 = EDGE_LOOP('',(#418157,#418158,#418164,#418165)); +#418157 = ORIENTED_EDGE('',*,*,#418121,.T.); +#418158 = ORIENTED_EDGE('',*,*,#418159,.T.); +#418159 = EDGE_CURVE('',#418122,#418142,#418160,.T.); +#418160 = LINE('',#418161,#418162); +#418161 = CARTESIAN_POINT('',(127.624265,-74.300735,-3.6E-02)); +#418162 = VECTOR('',#418163,1.); +#418163 = DIRECTION('',(0.,0.,1.)); +#418164 = ORIENTED_EDGE('',*,*,#418141,.F.); +#418165 = ORIENTED_EDGE('',*,*,#418159,.F.); +#418166 = CYLINDRICAL_SURFACE('',#418167,0.125); +#418167 = AXIS2_PLACEMENT_3D('',#418168,#418169,#418170); +#418168 = CARTESIAN_POINT('',(127.624265,-74.175735,-3.6E-02)); +#418169 = DIRECTION('',(-0.,-0.,-1.)); +#418170 = DIRECTION('',(-0.,-1.,0.)); +#418171 = MANIFOLD_SOLID_BREP('',#418172); +#418172 = CLOSED_SHELL('',(#418173,#418206,#418226,#418246)); +#418173 = ADVANCED_FACE('',(#418174),#418201,.T.); +#418174 = FACE_BOUND('',#418175,.F.); +#418175 = EDGE_LOOP('',(#418176,#418186,#418193,#418194)); +#418176 = ORIENTED_EDGE('',*,*,#418177,.T.); +#418177 = EDGE_CURVE('',#418178,#418180,#418182,.T.); +#418178 = VERTEX_POINT('',#418179); +#418179 = CARTESIAN_POINT('',(133.35,-78.95,-3.5E-02)); +#418180 = VERTEX_POINT('',#418181); +#418181 = CARTESIAN_POINT('',(133.35,-78.95,1.545)); +#418182 = LINE('',#418183,#418184); +#418183 = CARTESIAN_POINT('',(133.35,-78.95,-3.5E-02)); +#418184 = VECTOR('',#418185,1.); +#418185 = DIRECTION('',(0.,0.,1.)); +#418186 = ORIENTED_EDGE('',*,*,#418187,.T.); +#418187 = EDGE_CURVE('',#418180,#418180,#418188,.T.); +#418188 = CIRCLE('',#418189,0.15); +#418189 = AXIS2_PLACEMENT_3D('',#418190,#418191,#418192); +#418190 = CARTESIAN_POINT('',(133.35,-78.8,1.545)); +#418191 = DIRECTION('',(0.,0.,1.)); +#418192 = DIRECTION('',(-0.,-1.,0.)); +#418193 = ORIENTED_EDGE('',*,*,#418177,.F.); +#418194 = ORIENTED_EDGE('',*,*,#418195,.F.); +#418195 = EDGE_CURVE('',#418178,#418178,#418196,.T.); +#418196 = CIRCLE('',#418197,0.15); +#418197 = AXIS2_PLACEMENT_3D('',#418198,#418199,#418200); +#418198 = CARTESIAN_POINT('',(133.35,-78.8,-3.5E-02)); +#418199 = DIRECTION('',(0.,0.,1.)); +#418200 = DIRECTION('',(-0.,-1.,0.)); +#418201 = CYLINDRICAL_SURFACE('',#418202,0.15); +#418202 = AXIS2_PLACEMENT_3D('',#418203,#418204,#418205); +#418203 = CARTESIAN_POINT('',(133.35,-78.8,-3.5E-02)); +#418204 = DIRECTION('',(-0.,-0.,-1.)); +#418205 = DIRECTION('',(-0.,-1.,0.)); +#418206 = ADVANCED_FACE('',(#418207,#418210),#418221,.F.); +#418207 = FACE_BOUND('',#418208,.F.); +#418208 = EDGE_LOOP('',(#418209)); +#418209 = ORIENTED_EDGE('',*,*,#418195,.T.); +#418210 = FACE_BOUND('',#418211,.F.); +#418211 = EDGE_LOOP('',(#418212)); +#418212 = ORIENTED_EDGE('',*,*,#418213,.T.); +#418213 = EDGE_CURVE('',#418214,#418214,#418216,.T.); +#418214 = VERTEX_POINT('',#418215); +#418215 = CARTESIAN_POINT('',(133.35,-78.925,-3.5E-02)); +#418216 = CIRCLE('',#418217,0.125); +#418217 = AXIS2_PLACEMENT_3D('',#418218,#418219,#418220); +#418218 = CARTESIAN_POINT('',(133.35,-78.8,-3.5E-02)); +#418219 = DIRECTION('',(-0.,0.,-1.)); +#418220 = DIRECTION('',(-0.,-1.,0.)); +#418221 = PLANE('',#418222); +#418222 = AXIS2_PLACEMENT_3D('',#418223,#418224,#418225); +#418223 = CARTESIAN_POINT('',(133.35,-78.95,-3.5E-02)); +#418224 = DIRECTION('',(0.,0.,1.)); +#418225 = DIRECTION('',(1.,0.,-0.)); +#418226 = ADVANCED_FACE('',(#418227,#418230),#418241,.T.); +#418227 = FACE_BOUND('',#418228,.T.); +#418228 = EDGE_LOOP('',(#418229)); +#418229 = ORIENTED_EDGE('',*,*,#418187,.T.); +#418230 = FACE_BOUND('',#418231,.T.); +#418231 = EDGE_LOOP('',(#418232)); +#418232 = ORIENTED_EDGE('',*,*,#418233,.T.); +#418233 = EDGE_CURVE('',#418234,#418234,#418236,.T.); +#418234 = VERTEX_POINT('',#418235); +#418235 = CARTESIAN_POINT('',(133.35,-78.925,1.545)); +#418236 = CIRCLE('',#418237,0.125); +#418237 = AXIS2_PLACEMENT_3D('',#418238,#418239,#418240); +#418238 = CARTESIAN_POINT('',(133.35,-78.8,1.545)); +#418239 = DIRECTION('',(-0.,0.,-1.)); +#418240 = DIRECTION('',(-0.,-1.,0.)); +#418241 = PLANE('',#418242); +#418242 = AXIS2_PLACEMENT_3D('',#418243,#418244,#418245); +#418243 = CARTESIAN_POINT('',(133.35,-78.95,1.545)); +#418244 = DIRECTION('',(0.,0.,1.)); +#418245 = DIRECTION('',(1.,0.,-0.)); +#418246 = ADVANCED_FACE('',(#418247),#418258,.F.); +#418247 = FACE_BOUND('',#418248,.T.); +#418248 = EDGE_LOOP('',(#418249,#418250,#418256,#418257)); +#418249 = ORIENTED_EDGE('',*,*,#418213,.T.); +#418250 = ORIENTED_EDGE('',*,*,#418251,.T.); +#418251 = EDGE_CURVE('',#418214,#418234,#418252,.T.); +#418252 = LINE('',#418253,#418254); +#418253 = CARTESIAN_POINT('',(133.35,-78.925,-3.6E-02)); +#418254 = VECTOR('',#418255,1.); +#418255 = DIRECTION('',(0.,0.,1.)); +#418256 = ORIENTED_EDGE('',*,*,#418233,.F.); +#418257 = ORIENTED_EDGE('',*,*,#418251,.F.); +#418258 = CYLINDRICAL_SURFACE('',#418259,0.125); +#418259 = AXIS2_PLACEMENT_3D('',#418260,#418261,#418262); +#418260 = CARTESIAN_POINT('',(133.35,-78.8,-3.6E-02)); +#418261 = DIRECTION('',(-0.,-0.,-1.)); +#418262 = DIRECTION('',(-0.,-1.,0.)); +#418263 = MANIFOLD_SOLID_BREP('',#418264); +#418264 = CLOSED_SHELL('',(#418265,#418298,#418318,#418338)); +#418265 = ADVANCED_FACE('',(#418266),#418293,.T.); +#418266 = FACE_BOUND('',#418267,.F.); +#418267 = EDGE_LOOP('',(#418268,#418278,#418285,#418286)); +#418268 = ORIENTED_EDGE('',*,*,#418269,.T.); +#418269 = EDGE_CURVE('',#418270,#418272,#418274,.T.); +#418270 = VERTEX_POINT('',#418271); +#418271 = CARTESIAN_POINT('',(133.35,-76.5,-3.5E-02)); +#418272 = VERTEX_POINT('',#418273); +#418273 = CARTESIAN_POINT('',(133.35,-76.5,1.545)); +#418274 = LINE('',#418275,#418276); +#418275 = CARTESIAN_POINT('',(133.35,-76.5,-3.5E-02)); +#418276 = VECTOR('',#418277,1.); +#418277 = DIRECTION('',(0.,0.,1.)); +#418278 = ORIENTED_EDGE('',*,*,#418279,.T.); +#418279 = EDGE_CURVE('',#418272,#418272,#418280,.T.); +#418280 = CIRCLE('',#418281,0.15); +#418281 = AXIS2_PLACEMENT_3D('',#418282,#418283,#418284); +#418282 = CARTESIAN_POINT('',(133.35,-76.35,1.545)); +#418283 = DIRECTION('',(0.,0.,1.)); +#418284 = DIRECTION('',(-0.,-1.,0.)); +#418285 = ORIENTED_EDGE('',*,*,#418269,.F.); +#418286 = ORIENTED_EDGE('',*,*,#418287,.F.); +#418287 = EDGE_CURVE('',#418270,#418270,#418288,.T.); +#418288 = CIRCLE('',#418289,0.15); +#418289 = AXIS2_PLACEMENT_3D('',#418290,#418291,#418292); +#418290 = CARTESIAN_POINT('',(133.35,-76.35,-3.5E-02)); +#418291 = DIRECTION('',(0.,0.,1.)); +#418292 = DIRECTION('',(-0.,-1.,0.)); +#418293 = CYLINDRICAL_SURFACE('',#418294,0.15); +#418294 = AXIS2_PLACEMENT_3D('',#418295,#418296,#418297); +#418295 = CARTESIAN_POINT('',(133.35,-76.35,-3.5E-02)); +#418296 = DIRECTION('',(-0.,-0.,-1.)); +#418297 = DIRECTION('',(-0.,-1.,0.)); +#418298 = ADVANCED_FACE('',(#418299,#418302),#418313,.F.); +#418299 = FACE_BOUND('',#418300,.F.); +#418300 = EDGE_LOOP('',(#418301)); +#418301 = ORIENTED_EDGE('',*,*,#418287,.T.); +#418302 = FACE_BOUND('',#418303,.F.); +#418303 = EDGE_LOOP('',(#418304)); +#418304 = ORIENTED_EDGE('',*,*,#418305,.T.); +#418305 = EDGE_CURVE('',#418306,#418306,#418308,.T.); +#418306 = VERTEX_POINT('',#418307); +#418307 = CARTESIAN_POINT('',(133.35,-76.475,-3.5E-02)); +#418308 = CIRCLE('',#418309,0.125); +#418309 = AXIS2_PLACEMENT_3D('',#418310,#418311,#418312); +#418310 = CARTESIAN_POINT('',(133.35,-76.35,-3.5E-02)); +#418311 = DIRECTION('',(-0.,0.,-1.)); +#418312 = DIRECTION('',(-0.,-1.,0.)); +#418313 = PLANE('',#418314); +#418314 = AXIS2_PLACEMENT_3D('',#418315,#418316,#418317); +#418315 = CARTESIAN_POINT('',(133.35,-76.5,-3.5E-02)); +#418316 = DIRECTION('',(0.,0.,1.)); +#418317 = DIRECTION('',(1.,0.,-0.)); +#418318 = ADVANCED_FACE('',(#418319,#418322),#418333,.T.); +#418319 = FACE_BOUND('',#418320,.T.); +#418320 = EDGE_LOOP('',(#418321)); +#418321 = ORIENTED_EDGE('',*,*,#418279,.T.); +#418322 = FACE_BOUND('',#418323,.T.); +#418323 = EDGE_LOOP('',(#418324)); +#418324 = ORIENTED_EDGE('',*,*,#418325,.T.); +#418325 = EDGE_CURVE('',#418326,#418326,#418328,.T.); +#418326 = VERTEX_POINT('',#418327); +#418327 = CARTESIAN_POINT('',(133.35,-76.475,1.545)); +#418328 = CIRCLE('',#418329,0.125); +#418329 = AXIS2_PLACEMENT_3D('',#418330,#418331,#418332); +#418330 = CARTESIAN_POINT('',(133.35,-76.35,1.545)); +#418331 = DIRECTION('',(-0.,0.,-1.)); +#418332 = DIRECTION('',(-0.,-1.,0.)); +#418333 = PLANE('',#418334); +#418334 = AXIS2_PLACEMENT_3D('',#418335,#418336,#418337); +#418335 = CARTESIAN_POINT('',(133.35,-76.5,1.545)); +#418336 = DIRECTION('',(0.,0.,1.)); +#418337 = DIRECTION('',(1.,0.,-0.)); +#418338 = ADVANCED_FACE('',(#418339),#418350,.F.); +#418339 = FACE_BOUND('',#418340,.T.); +#418340 = EDGE_LOOP('',(#418341,#418342,#418348,#418349)); +#418341 = ORIENTED_EDGE('',*,*,#418305,.T.); +#418342 = ORIENTED_EDGE('',*,*,#418343,.T.); +#418343 = EDGE_CURVE('',#418306,#418326,#418344,.T.); +#418344 = LINE('',#418345,#418346); +#418345 = CARTESIAN_POINT('',(133.35,-76.475,-3.6E-02)); +#418346 = VECTOR('',#418347,1.); +#418347 = DIRECTION('',(0.,0.,1.)); +#418348 = ORIENTED_EDGE('',*,*,#418325,.F.); +#418349 = ORIENTED_EDGE('',*,*,#418343,.F.); +#418350 = CYLINDRICAL_SURFACE('',#418351,0.125); +#418351 = AXIS2_PLACEMENT_3D('',#418352,#418353,#418354); +#418352 = CARTESIAN_POINT('',(133.35,-76.35,-3.6E-02)); +#418353 = DIRECTION('',(-0.,-0.,-1.)); +#418354 = DIRECTION('',(-0.,-1.,0.)); +#418355 = MANIFOLD_SOLID_BREP('',#418356); +#418356 = CLOSED_SHELL('',(#418357,#418390,#418410,#418430)); +#418357 = ADVANCED_FACE('',(#418358),#418385,.T.); +#418358 = FACE_BOUND('',#418359,.F.); +#418359 = EDGE_LOOP('',(#418360,#418370,#418377,#418378)); +#418360 = ORIENTED_EDGE('',*,*,#418361,.T.); +#418361 = EDGE_CURVE('',#418362,#418364,#418366,.T.); +#418362 = VERTEX_POINT('',#418363); +#418363 = CARTESIAN_POINT('',(133.3,-94.55,-3.5E-02)); +#418364 = VERTEX_POINT('',#418365); +#418365 = CARTESIAN_POINT('',(133.3,-94.55,1.545)); +#418366 = LINE('',#418367,#418368); +#418367 = CARTESIAN_POINT('',(133.3,-94.55,-3.5E-02)); +#418368 = VECTOR('',#418369,1.); +#418369 = DIRECTION('',(0.,0.,1.)); +#418370 = ORIENTED_EDGE('',*,*,#418371,.T.); +#418371 = EDGE_CURVE('',#418364,#418364,#418372,.T.); +#418372 = CIRCLE('',#418373,0.15); +#418373 = AXIS2_PLACEMENT_3D('',#418374,#418375,#418376); +#418374 = CARTESIAN_POINT('',(133.3,-94.4,1.545)); +#418375 = DIRECTION('',(0.,0.,1.)); +#418376 = DIRECTION('',(-0.,-1.,0.)); +#418377 = ORIENTED_EDGE('',*,*,#418361,.F.); +#418378 = ORIENTED_EDGE('',*,*,#418379,.F.); +#418379 = EDGE_CURVE('',#418362,#418362,#418380,.T.); +#418380 = CIRCLE('',#418381,0.15); +#418381 = AXIS2_PLACEMENT_3D('',#418382,#418383,#418384); +#418382 = CARTESIAN_POINT('',(133.3,-94.4,-3.5E-02)); +#418383 = DIRECTION('',(0.,0.,1.)); +#418384 = DIRECTION('',(-0.,-1.,0.)); +#418385 = CYLINDRICAL_SURFACE('',#418386,0.15); +#418386 = AXIS2_PLACEMENT_3D('',#418387,#418388,#418389); +#418387 = CARTESIAN_POINT('',(133.3,-94.4,-3.5E-02)); +#418388 = DIRECTION('',(-0.,-0.,-1.)); +#418389 = DIRECTION('',(-0.,-1.,0.)); +#418390 = ADVANCED_FACE('',(#418391,#418394),#418405,.F.); +#418391 = FACE_BOUND('',#418392,.F.); +#418392 = EDGE_LOOP('',(#418393)); +#418393 = ORIENTED_EDGE('',*,*,#418379,.T.); +#418394 = FACE_BOUND('',#418395,.F.); +#418395 = EDGE_LOOP('',(#418396)); +#418396 = ORIENTED_EDGE('',*,*,#418397,.T.); +#418397 = EDGE_CURVE('',#418398,#418398,#418400,.T.); +#418398 = VERTEX_POINT('',#418399); +#418399 = CARTESIAN_POINT('',(133.3,-94.525,-3.5E-02)); +#418400 = CIRCLE('',#418401,0.125); +#418401 = AXIS2_PLACEMENT_3D('',#418402,#418403,#418404); +#418402 = CARTESIAN_POINT('',(133.3,-94.4,-3.5E-02)); +#418403 = DIRECTION('',(-0.,0.,-1.)); +#418404 = DIRECTION('',(-0.,-1.,0.)); +#418405 = PLANE('',#418406); +#418406 = AXIS2_PLACEMENT_3D('',#418407,#418408,#418409); +#418407 = CARTESIAN_POINT('',(133.3,-94.55,-3.5E-02)); +#418408 = DIRECTION('',(0.,0.,1.)); +#418409 = DIRECTION('',(1.,0.,-0.)); +#418410 = ADVANCED_FACE('',(#418411,#418414),#418425,.T.); +#418411 = FACE_BOUND('',#418412,.T.); +#418412 = EDGE_LOOP('',(#418413)); +#418413 = ORIENTED_EDGE('',*,*,#418371,.T.); +#418414 = FACE_BOUND('',#418415,.T.); +#418415 = EDGE_LOOP('',(#418416)); +#418416 = ORIENTED_EDGE('',*,*,#418417,.T.); +#418417 = EDGE_CURVE('',#418418,#418418,#418420,.T.); +#418418 = VERTEX_POINT('',#418419); +#418419 = CARTESIAN_POINT('',(133.3,-94.525,1.545)); +#418420 = CIRCLE('',#418421,0.125); +#418421 = AXIS2_PLACEMENT_3D('',#418422,#418423,#418424); +#418422 = CARTESIAN_POINT('',(133.3,-94.4,1.545)); +#418423 = DIRECTION('',(-0.,0.,-1.)); +#418424 = DIRECTION('',(-0.,-1.,0.)); +#418425 = PLANE('',#418426); +#418426 = AXIS2_PLACEMENT_3D('',#418427,#418428,#418429); +#418427 = CARTESIAN_POINT('',(133.3,-94.55,1.545)); +#418428 = DIRECTION('',(0.,0.,1.)); +#418429 = DIRECTION('',(1.,0.,-0.)); +#418430 = ADVANCED_FACE('',(#418431),#418442,.F.); +#418431 = FACE_BOUND('',#418432,.T.); +#418432 = EDGE_LOOP('',(#418433,#418434,#418440,#418441)); +#418433 = ORIENTED_EDGE('',*,*,#418397,.T.); +#418434 = ORIENTED_EDGE('',*,*,#418435,.T.); +#418435 = EDGE_CURVE('',#418398,#418418,#418436,.T.); +#418436 = LINE('',#418437,#418438); +#418437 = CARTESIAN_POINT('',(133.3,-94.525,-3.6E-02)); +#418438 = VECTOR('',#418439,1.); +#418439 = DIRECTION('',(0.,0.,1.)); +#418440 = ORIENTED_EDGE('',*,*,#418417,.F.); +#418441 = ORIENTED_EDGE('',*,*,#418435,.F.); +#418442 = CYLINDRICAL_SURFACE('',#418443,0.125); +#418443 = AXIS2_PLACEMENT_3D('',#418444,#418445,#418446); +#418444 = CARTESIAN_POINT('',(133.3,-94.4,-3.6E-02)); +#418445 = DIRECTION('',(-0.,-0.,-1.)); +#418446 = DIRECTION('',(-0.,-1.,0.)); +#418447 = MANIFOLD_SOLID_BREP('',#418448); +#418448 = CLOSED_SHELL('',(#418449,#418482,#418502,#418522)); +#418449 = ADVANCED_FACE('',(#418450),#418477,.T.); +#418450 = FACE_BOUND('',#418451,.F.); +#418451 = EDGE_LOOP('',(#418452,#418462,#418469,#418470)); +#418452 = ORIENTED_EDGE('',*,*,#418453,.T.); +#418453 = EDGE_CURVE('',#418454,#418456,#418458,.T.); +#418454 = VERTEX_POINT('',#418455); +#418455 = CARTESIAN_POINT('',(142.,-84.65,-3.5E-02)); +#418456 = VERTEX_POINT('',#418457); +#418457 = CARTESIAN_POINT('',(142.,-84.65,1.545)); +#418458 = LINE('',#418459,#418460); +#418459 = CARTESIAN_POINT('',(142.,-84.65,-3.5E-02)); +#418460 = VECTOR('',#418461,1.); +#418461 = DIRECTION('',(0.,0.,1.)); +#418462 = ORIENTED_EDGE('',*,*,#418463,.T.); +#418463 = EDGE_CURVE('',#418456,#418456,#418464,.T.); +#418464 = CIRCLE('',#418465,0.15); +#418465 = AXIS2_PLACEMENT_3D('',#418466,#418467,#418468); +#418466 = CARTESIAN_POINT('',(142.,-84.5,1.545)); +#418467 = DIRECTION('',(0.,0.,1.)); +#418468 = DIRECTION('',(-0.,-1.,0.)); +#418469 = ORIENTED_EDGE('',*,*,#418453,.F.); +#418470 = ORIENTED_EDGE('',*,*,#418471,.F.); +#418471 = EDGE_CURVE('',#418454,#418454,#418472,.T.); +#418472 = CIRCLE('',#418473,0.15); +#418473 = AXIS2_PLACEMENT_3D('',#418474,#418475,#418476); +#418474 = CARTESIAN_POINT('',(142.,-84.5,-3.5E-02)); +#418475 = DIRECTION('',(0.,0.,1.)); +#418476 = DIRECTION('',(-0.,-1.,0.)); +#418477 = CYLINDRICAL_SURFACE('',#418478,0.15); +#418478 = AXIS2_PLACEMENT_3D('',#418479,#418480,#418481); +#418479 = CARTESIAN_POINT('',(142.,-84.5,-3.5E-02)); +#418480 = DIRECTION('',(-0.,-0.,-1.)); +#418481 = DIRECTION('',(-0.,-1.,0.)); +#418482 = ADVANCED_FACE('',(#418483,#418486),#418497,.F.); +#418483 = FACE_BOUND('',#418484,.F.); +#418484 = EDGE_LOOP('',(#418485)); +#418485 = ORIENTED_EDGE('',*,*,#418471,.T.); +#418486 = FACE_BOUND('',#418487,.F.); +#418487 = EDGE_LOOP('',(#418488)); +#418488 = ORIENTED_EDGE('',*,*,#418489,.T.); +#418489 = EDGE_CURVE('',#418490,#418490,#418492,.T.); +#418490 = VERTEX_POINT('',#418491); +#418491 = CARTESIAN_POINT('',(142.,-84.625,-3.5E-02)); +#418492 = CIRCLE('',#418493,0.125); +#418493 = AXIS2_PLACEMENT_3D('',#418494,#418495,#418496); +#418494 = CARTESIAN_POINT('',(142.,-84.5,-3.5E-02)); +#418495 = DIRECTION('',(-0.,0.,-1.)); +#418496 = DIRECTION('',(-0.,-1.,0.)); +#418497 = PLANE('',#418498); +#418498 = AXIS2_PLACEMENT_3D('',#418499,#418500,#418501); +#418499 = CARTESIAN_POINT('',(142.,-84.65,-3.5E-02)); +#418500 = DIRECTION('',(0.,0.,1.)); +#418501 = DIRECTION('',(1.,0.,-0.)); +#418502 = ADVANCED_FACE('',(#418503,#418506),#418517,.T.); +#418503 = FACE_BOUND('',#418504,.T.); +#418504 = EDGE_LOOP('',(#418505)); +#418505 = ORIENTED_EDGE('',*,*,#418463,.T.); +#418506 = FACE_BOUND('',#418507,.T.); +#418507 = EDGE_LOOP('',(#418508)); +#418508 = ORIENTED_EDGE('',*,*,#418509,.T.); +#418509 = EDGE_CURVE('',#418510,#418510,#418512,.T.); +#418510 = VERTEX_POINT('',#418511); +#418511 = CARTESIAN_POINT('',(142.,-84.625,1.545)); +#418512 = CIRCLE('',#418513,0.125); +#418513 = AXIS2_PLACEMENT_3D('',#418514,#418515,#418516); +#418514 = CARTESIAN_POINT('',(142.,-84.5,1.545)); +#418515 = DIRECTION('',(-0.,0.,-1.)); +#418516 = DIRECTION('',(-0.,-1.,0.)); +#418517 = PLANE('',#418518); +#418518 = AXIS2_PLACEMENT_3D('',#418519,#418520,#418521); +#418519 = CARTESIAN_POINT('',(142.,-84.65,1.545)); +#418520 = DIRECTION('',(0.,0.,1.)); +#418521 = DIRECTION('',(1.,0.,-0.)); +#418522 = ADVANCED_FACE('',(#418523),#418534,.F.); +#418523 = FACE_BOUND('',#418524,.T.); +#418524 = EDGE_LOOP('',(#418525,#418526,#418532,#418533)); +#418525 = ORIENTED_EDGE('',*,*,#418489,.T.); +#418526 = ORIENTED_EDGE('',*,*,#418527,.T.); +#418527 = EDGE_CURVE('',#418490,#418510,#418528,.T.); +#418528 = LINE('',#418529,#418530); +#418529 = CARTESIAN_POINT('',(142.,-84.625,-3.6E-02)); +#418530 = VECTOR('',#418531,1.); +#418531 = DIRECTION('',(0.,0.,1.)); +#418532 = ORIENTED_EDGE('',*,*,#418509,.F.); +#418533 = ORIENTED_EDGE('',*,*,#418527,.F.); +#418534 = CYLINDRICAL_SURFACE('',#418535,0.125); +#418535 = AXIS2_PLACEMENT_3D('',#418536,#418537,#418538); +#418536 = CARTESIAN_POINT('',(142.,-84.5,-3.6E-02)); +#418537 = DIRECTION('',(-0.,-0.,-1.)); +#418538 = DIRECTION('',(-0.,-1.,0.)); +#418539 = MANIFOLD_SOLID_BREP('',#418540); +#418540 = CLOSED_SHELL('',(#418541,#418574,#418594,#418614)); +#418541 = ADVANCED_FACE('',(#418542),#418569,.T.); +#418542 = FACE_BOUND('',#418543,.F.); +#418543 = EDGE_LOOP('',(#418544,#418554,#418561,#418562)); +#418544 = ORIENTED_EDGE('',*,*,#418545,.T.); +#418545 = EDGE_CURVE('',#418546,#418548,#418550,.T.); +#418546 = VERTEX_POINT('',#418547); +#418547 = CARTESIAN_POINT('',(136.446917,-92.096917,-3.5E-02)); +#418548 = VERTEX_POINT('',#418549); +#418549 = CARTESIAN_POINT('',(136.446917,-92.096917,1.545)); +#418550 = LINE('',#418551,#418552); +#418551 = CARTESIAN_POINT('',(136.446917,-92.096917,-3.5E-02)); +#418552 = VECTOR('',#418553,1.); +#418553 = DIRECTION('',(0.,0.,1.)); +#418554 = ORIENTED_EDGE('',*,*,#418555,.T.); +#418555 = EDGE_CURVE('',#418548,#418548,#418556,.T.); +#418556 = CIRCLE('',#418557,0.15); +#418557 = AXIS2_PLACEMENT_3D('',#418558,#418559,#418560); +#418558 = CARTESIAN_POINT('',(136.446917,-91.946917,1.545)); +#418559 = DIRECTION('',(0.,-0.,1.)); +#418560 = DIRECTION('',(1.894780628694E-13,-1.,-0.)); +#418561 = ORIENTED_EDGE('',*,*,#418545,.F.); +#418562 = ORIENTED_EDGE('',*,*,#418563,.F.); +#418563 = EDGE_CURVE('',#418546,#418546,#418564,.T.); +#418564 = CIRCLE('',#418565,0.15); +#418565 = AXIS2_PLACEMENT_3D('',#418566,#418567,#418568); +#418566 = CARTESIAN_POINT('',(136.446917,-91.946917,-3.5E-02)); +#418567 = DIRECTION('',(0.,-0.,1.)); +#418568 = DIRECTION('',(1.894780628694E-13,-1.,-0.)); +#418569 = CYLINDRICAL_SURFACE('',#418570,0.15); +#418570 = AXIS2_PLACEMENT_3D('',#418571,#418572,#418573); +#418571 = CARTESIAN_POINT('',(136.446917,-91.946917,-3.5E-02)); +#418572 = DIRECTION('',(-0.,0.,-1.)); +#418573 = DIRECTION('',(1.894780628694E-13,-1.,-0.)); +#418574 = ADVANCED_FACE('',(#418575,#418578),#418589,.F.); +#418575 = FACE_BOUND('',#418576,.F.); +#418576 = EDGE_LOOP('',(#418577)); +#418577 = ORIENTED_EDGE('',*,*,#418563,.T.); +#418578 = FACE_BOUND('',#418579,.F.); +#418579 = EDGE_LOOP('',(#418580)); +#418580 = ORIENTED_EDGE('',*,*,#418581,.T.); +#418581 = EDGE_CURVE('',#418582,#418582,#418584,.T.); +#418582 = VERTEX_POINT('',#418583); +#418583 = CARTESIAN_POINT('',(136.446917,-92.071917,-3.5E-02)); +#418584 = CIRCLE('',#418585,0.125); +#418585 = AXIS2_PLACEMENT_3D('',#418586,#418587,#418588); +#418586 = CARTESIAN_POINT('',(136.446917,-91.946917,-3.5E-02)); +#418587 = DIRECTION('',(-0.,0.,-1.)); +#418588 = DIRECTION('',(-0.,-1.,0.)); +#418589 = PLANE('',#418590); +#418590 = AXIS2_PLACEMENT_3D('',#418591,#418592,#418593); +#418591 = CARTESIAN_POINT('',(136.446917,-92.096917,-3.5E-02)); +#418592 = DIRECTION('',(0.,0.,1.)); +#418593 = DIRECTION('',(1.,0.,-0.)); +#418594 = ADVANCED_FACE('',(#418595,#418598),#418609,.T.); +#418595 = FACE_BOUND('',#418596,.T.); +#418596 = EDGE_LOOP('',(#418597)); +#418597 = ORIENTED_EDGE('',*,*,#418555,.T.); +#418598 = FACE_BOUND('',#418599,.T.); +#418599 = EDGE_LOOP('',(#418600)); +#418600 = ORIENTED_EDGE('',*,*,#418601,.T.); +#418601 = EDGE_CURVE('',#418602,#418602,#418604,.T.); +#418602 = VERTEX_POINT('',#418603); +#418603 = CARTESIAN_POINT('',(136.446917,-92.071917,1.545)); +#418604 = CIRCLE('',#418605,0.125); +#418605 = AXIS2_PLACEMENT_3D('',#418606,#418607,#418608); +#418606 = CARTESIAN_POINT('',(136.446917,-91.946917,1.545)); +#418607 = DIRECTION('',(-0.,0.,-1.)); +#418608 = DIRECTION('',(-0.,-1.,0.)); +#418609 = PLANE('',#418610); +#418610 = AXIS2_PLACEMENT_3D('',#418611,#418612,#418613); +#418611 = CARTESIAN_POINT('',(136.446917,-92.096917,1.545)); +#418612 = DIRECTION('',(0.,0.,1.)); +#418613 = DIRECTION('',(1.,0.,-0.)); +#418614 = ADVANCED_FACE('',(#418615),#418626,.F.); +#418615 = FACE_BOUND('',#418616,.T.); +#418616 = EDGE_LOOP('',(#418617,#418618,#418624,#418625)); +#418617 = ORIENTED_EDGE('',*,*,#418581,.T.); +#418618 = ORIENTED_EDGE('',*,*,#418619,.T.); +#418619 = EDGE_CURVE('',#418582,#418602,#418620,.T.); +#418620 = LINE('',#418621,#418622); +#418621 = CARTESIAN_POINT('',(136.446917,-92.071917,-3.6E-02)); +#418622 = VECTOR('',#418623,1.); +#418623 = DIRECTION('',(0.,0.,1.)); +#418624 = ORIENTED_EDGE('',*,*,#418601,.F.); +#418625 = ORIENTED_EDGE('',*,*,#418619,.F.); +#418626 = CYLINDRICAL_SURFACE('',#418627,0.125); +#418627 = AXIS2_PLACEMENT_3D('',#418628,#418629,#418630); +#418628 = CARTESIAN_POINT('',(136.446917,-91.946917,-3.6E-02)); +#418629 = DIRECTION('',(-0.,-0.,-1.)); +#418630 = DIRECTION('',(-0.,-1.,0.)); +#418631 = MANIFOLD_SOLID_BREP('',#418632); +#418632 = CLOSED_SHELL('',(#418633,#418666,#418686,#418706)); +#418633 = ADVANCED_FACE('',(#418634),#418661,.T.); +#418634 = FACE_BOUND('',#418635,.F.); +#418635 = EDGE_LOOP('',(#418636,#418646,#418653,#418654)); +#418636 = ORIENTED_EDGE('',*,*,#418637,.T.); +#418637 = EDGE_CURVE('',#418638,#418640,#418642,.T.); +#418638 = VERTEX_POINT('',#418639); +#418639 = CARTESIAN_POINT('',(128.45,-100.030297,-3.5E-02)); +#418640 = VERTEX_POINT('',#418641); +#418641 = CARTESIAN_POINT('',(128.45,-100.030297,1.545)); +#418642 = LINE('',#418643,#418644); +#418643 = CARTESIAN_POINT('',(128.45,-100.030297,-3.5E-02)); +#418644 = VECTOR('',#418645,1.); +#418645 = DIRECTION('',(0.,0.,1.)); +#418646 = ORIENTED_EDGE('',*,*,#418647,.T.); +#418647 = EDGE_CURVE('',#418640,#418640,#418648,.T.); +#418648 = CIRCLE('',#418649,0.15); +#418649 = AXIS2_PLACEMENT_3D('',#418650,#418651,#418652); +#418650 = CARTESIAN_POINT('',(128.45,-99.880297,1.545)); +#418651 = DIRECTION('',(0.,0.,1.)); +#418652 = DIRECTION('',(-0.,-1.,0.)); +#418653 = ORIENTED_EDGE('',*,*,#418637,.F.); +#418654 = ORIENTED_EDGE('',*,*,#418655,.F.); +#418655 = EDGE_CURVE('',#418638,#418638,#418656,.T.); +#418656 = CIRCLE('',#418657,0.15); +#418657 = AXIS2_PLACEMENT_3D('',#418658,#418659,#418660); +#418658 = CARTESIAN_POINT('',(128.45,-99.880297,-3.5E-02)); +#418659 = DIRECTION('',(0.,0.,1.)); +#418660 = DIRECTION('',(-0.,-1.,0.)); +#418661 = CYLINDRICAL_SURFACE('',#418662,0.15); +#418662 = AXIS2_PLACEMENT_3D('',#418663,#418664,#418665); +#418663 = CARTESIAN_POINT('',(128.45,-99.880297,-3.5E-02)); +#418664 = DIRECTION('',(-0.,-0.,-1.)); +#418665 = DIRECTION('',(-0.,-1.,0.)); +#418666 = ADVANCED_FACE('',(#418667,#418670),#418681,.F.); +#418667 = FACE_BOUND('',#418668,.F.); +#418668 = EDGE_LOOP('',(#418669)); +#418669 = ORIENTED_EDGE('',*,*,#418655,.T.); +#418670 = FACE_BOUND('',#418671,.F.); +#418671 = EDGE_LOOP('',(#418672)); +#418672 = ORIENTED_EDGE('',*,*,#418673,.T.); +#418673 = EDGE_CURVE('',#418674,#418674,#418676,.T.); +#418674 = VERTEX_POINT('',#418675); +#418675 = CARTESIAN_POINT('',(128.45,-100.005297,-3.5E-02)); +#418676 = CIRCLE('',#418677,0.125); +#418677 = AXIS2_PLACEMENT_3D('',#418678,#418679,#418680); +#418678 = CARTESIAN_POINT('',(128.45,-99.880297,-3.5E-02)); +#418679 = DIRECTION('',(-0.,0.,-1.)); +#418680 = DIRECTION('',(-0.,-1.,0.)); +#418681 = PLANE('',#418682); +#418682 = AXIS2_PLACEMENT_3D('',#418683,#418684,#418685); +#418683 = CARTESIAN_POINT('',(128.45,-100.030297,-3.5E-02)); +#418684 = DIRECTION('',(0.,0.,1.)); +#418685 = DIRECTION('',(1.,0.,-0.)); +#418686 = ADVANCED_FACE('',(#418687,#418690),#418701,.T.); +#418687 = FACE_BOUND('',#418688,.T.); +#418688 = EDGE_LOOP('',(#418689)); +#418689 = ORIENTED_EDGE('',*,*,#418647,.T.); +#418690 = FACE_BOUND('',#418691,.T.); +#418691 = EDGE_LOOP('',(#418692)); +#418692 = ORIENTED_EDGE('',*,*,#418693,.T.); +#418693 = EDGE_CURVE('',#418694,#418694,#418696,.T.); +#418694 = VERTEX_POINT('',#418695); +#418695 = CARTESIAN_POINT('',(128.45,-100.005297,1.545)); +#418696 = CIRCLE('',#418697,0.125); +#418697 = AXIS2_PLACEMENT_3D('',#418698,#418699,#418700); +#418698 = CARTESIAN_POINT('',(128.45,-99.880297,1.545)); +#418699 = DIRECTION('',(-0.,0.,-1.)); +#418700 = DIRECTION('',(-0.,-1.,0.)); +#418701 = PLANE('',#418702); +#418702 = AXIS2_PLACEMENT_3D('',#418703,#418704,#418705); +#418703 = CARTESIAN_POINT('',(128.45,-100.030297,1.545)); +#418704 = DIRECTION('',(0.,0.,1.)); +#418705 = DIRECTION('',(1.,0.,-0.)); +#418706 = ADVANCED_FACE('',(#418707),#418718,.F.); +#418707 = FACE_BOUND('',#418708,.T.); +#418708 = EDGE_LOOP('',(#418709,#418710,#418716,#418717)); +#418709 = ORIENTED_EDGE('',*,*,#418673,.T.); +#418710 = ORIENTED_EDGE('',*,*,#418711,.T.); +#418711 = EDGE_CURVE('',#418674,#418694,#418712,.T.); +#418712 = LINE('',#418713,#418714); +#418713 = CARTESIAN_POINT('',(128.45,-100.005297,-3.6E-02)); +#418714 = VECTOR('',#418715,1.); +#418715 = DIRECTION('',(0.,0.,1.)); +#418716 = ORIENTED_EDGE('',*,*,#418693,.F.); +#418717 = ORIENTED_EDGE('',*,*,#418711,.F.); +#418718 = CYLINDRICAL_SURFACE('',#418719,0.125); +#418719 = AXIS2_PLACEMENT_3D('',#418720,#418721,#418722); +#418720 = CARTESIAN_POINT('',(128.45,-99.880297,-3.6E-02)); +#418721 = DIRECTION('',(-0.,-0.,-1.)); +#418722 = DIRECTION('',(-0.,-1.,0.)); +#418723 = MANIFOLD_SOLID_BREP('',#418724); +#418724 = CLOSED_SHELL('',(#418725,#418758,#418778,#418798)); +#418725 = ADVANCED_FACE('',(#418726),#418753,.T.); +#418726 = FACE_BOUND('',#418727,.F.); +#418727 = EDGE_LOOP('',(#418728,#418738,#418745,#418746)); +#418728 = ORIENTED_EDGE('',*,*,#418729,.T.); +#418729 = EDGE_CURVE('',#418730,#418732,#418734,.T.); +#418730 = VERTEX_POINT('',#418731); +#418731 = CARTESIAN_POINT('',(143.5,-84.65,-3.5E-02)); +#418732 = VERTEX_POINT('',#418733); +#418733 = CARTESIAN_POINT('',(143.5,-84.65,1.545)); +#418734 = LINE('',#418735,#418736); +#418735 = CARTESIAN_POINT('',(143.5,-84.65,-3.5E-02)); +#418736 = VECTOR('',#418737,1.); +#418737 = DIRECTION('',(0.,0.,1.)); +#418738 = ORIENTED_EDGE('',*,*,#418739,.T.); +#418739 = EDGE_CURVE('',#418732,#418732,#418740,.T.); +#418740 = CIRCLE('',#418741,0.15); +#418741 = AXIS2_PLACEMENT_3D('',#418742,#418743,#418744); +#418742 = CARTESIAN_POINT('',(143.5,-84.5,1.545)); +#418743 = DIRECTION('',(0.,0.,1.)); +#418744 = DIRECTION('',(-0.,-1.,0.)); +#418745 = ORIENTED_EDGE('',*,*,#418729,.F.); +#418746 = ORIENTED_EDGE('',*,*,#418747,.F.); +#418747 = EDGE_CURVE('',#418730,#418730,#418748,.T.); +#418748 = CIRCLE('',#418749,0.15); +#418749 = AXIS2_PLACEMENT_3D('',#418750,#418751,#418752); +#418750 = CARTESIAN_POINT('',(143.5,-84.5,-3.5E-02)); +#418751 = DIRECTION('',(0.,0.,1.)); +#418752 = DIRECTION('',(-0.,-1.,0.)); +#418753 = CYLINDRICAL_SURFACE('',#418754,0.15); +#418754 = AXIS2_PLACEMENT_3D('',#418755,#418756,#418757); +#418755 = CARTESIAN_POINT('',(143.5,-84.5,-3.5E-02)); +#418756 = DIRECTION('',(-0.,-0.,-1.)); +#418757 = DIRECTION('',(-0.,-1.,0.)); +#418758 = ADVANCED_FACE('',(#418759,#418762),#418773,.F.); +#418759 = FACE_BOUND('',#418760,.F.); +#418760 = EDGE_LOOP('',(#418761)); +#418761 = ORIENTED_EDGE('',*,*,#418747,.T.); +#418762 = FACE_BOUND('',#418763,.F.); +#418763 = EDGE_LOOP('',(#418764)); +#418764 = ORIENTED_EDGE('',*,*,#418765,.T.); +#418765 = EDGE_CURVE('',#418766,#418766,#418768,.T.); +#418766 = VERTEX_POINT('',#418767); +#418767 = CARTESIAN_POINT('',(143.5,-84.625,-3.5E-02)); +#418768 = CIRCLE('',#418769,0.125); +#418769 = AXIS2_PLACEMENT_3D('',#418770,#418771,#418772); +#418770 = CARTESIAN_POINT('',(143.5,-84.5,-3.5E-02)); +#418771 = DIRECTION('',(-0.,0.,-1.)); +#418772 = DIRECTION('',(-0.,-1.,0.)); +#418773 = PLANE('',#418774); +#418774 = AXIS2_PLACEMENT_3D('',#418775,#418776,#418777); +#418775 = CARTESIAN_POINT('',(143.5,-84.65,-3.5E-02)); +#418776 = DIRECTION('',(0.,0.,1.)); +#418777 = DIRECTION('',(1.,0.,-0.)); +#418778 = ADVANCED_FACE('',(#418779,#418782),#418793,.T.); +#418779 = FACE_BOUND('',#418780,.T.); +#418780 = EDGE_LOOP('',(#418781)); +#418781 = ORIENTED_EDGE('',*,*,#418739,.T.); +#418782 = FACE_BOUND('',#418783,.T.); +#418783 = EDGE_LOOP('',(#418784)); +#418784 = ORIENTED_EDGE('',*,*,#418785,.T.); +#418785 = EDGE_CURVE('',#418786,#418786,#418788,.T.); +#418786 = VERTEX_POINT('',#418787); +#418787 = CARTESIAN_POINT('',(143.5,-84.625,1.545)); +#418788 = CIRCLE('',#418789,0.125); +#418789 = AXIS2_PLACEMENT_3D('',#418790,#418791,#418792); +#418790 = CARTESIAN_POINT('',(143.5,-84.5,1.545)); +#418791 = DIRECTION('',(-0.,0.,-1.)); +#418792 = DIRECTION('',(-0.,-1.,0.)); +#418793 = PLANE('',#418794); +#418794 = AXIS2_PLACEMENT_3D('',#418795,#418796,#418797); +#418795 = CARTESIAN_POINT('',(143.5,-84.65,1.545)); +#418796 = DIRECTION('',(0.,0.,1.)); +#418797 = DIRECTION('',(1.,0.,-0.)); +#418798 = ADVANCED_FACE('',(#418799),#418810,.F.); +#418799 = FACE_BOUND('',#418800,.T.); +#418800 = EDGE_LOOP('',(#418801,#418802,#418808,#418809)); +#418801 = ORIENTED_EDGE('',*,*,#418765,.T.); +#418802 = ORIENTED_EDGE('',*,*,#418803,.T.); +#418803 = EDGE_CURVE('',#418766,#418786,#418804,.T.); +#418804 = LINE('',#418805,#418806); +#418805 = CARTESIAN_POINT('',(143.5,-84.625,-3.6E-02)); +#418806 = VECTOR('',#418807,1.); +#418807 = DIRECTION('',(0.,0.,1.)); +#418808 = ORIENTED_EDGE('',*,*,#418785,.F.); +#418809 = ORIENTED_EDGE('',*,*,#418803,.F.); +#418810 = CYLINDRICAL_SURFACE('',#418811,0.125); +#418811 = AXIS2_PLACEMENT_3D('',#418812,#418813,#418814); +#418812 = CARTESIAN_POINT('',(143.5,-84.5,-3.6E-02)); +#418813 = DIRECTION('',(-0.,-0.,-1.)); +#418814 = DIRECTION('',(-0.,-1.,0.)); +#418815 = MANIFOLD_SOLID_BREP('',#418816); +#418816 = CLOSED_SHELL('',(#418817,#418850,#418870,#418890)); +#418817 = ADVANCED_FACE('',(#418818),#418845,.T.); +#418818 = FACE_BOUND('',#418819,.F.); +#418819 = EDGE_LOOP('',(#418820,#418830,#418837,#418838)); +#418820 = ORIENTED_EDGE('',*,*,#418821,.T.); +#418821 = EDGE_CURVE('',#418822,#418824,#418826,.T.); +#418822 = VERTEX_POINT('',#418823); +#418823 = CARTESIAN_POINT('',(135.816422,-93.575941,-3.5E-02)); +#418824 = VERTEX_POINT('',#418825); +#418825 = CARTESIAN_POINT('',(135.816422,-93.575941,1.545)); +#418826 = LINE('',#418827,#418828); +#418827 = CARTESIAN_POINT('',(135.816422,-93.575941,-3.5E-02)); +#418828 = VECTOR('',#418829,1.); +#418829 = DIRECTION('',(0.,0.,1.)); +#418830 = ORIENTED_EDGE('',*,*,#418831,.T.); +#418831 = EDGE_CURVE('',#418824,#418824,#418832,.T.); +#418832 = CIRCLE('',#418833,0.15); +#418833 = AXIS2_PLACEMENT_3D('',#418834,#418835,#418836); +#418834 = CARTESIAN_POINT('',(135.816422,-93.425941,1.545)); +#418835 = DIRECTION('',(0.,0.,1.)); +#418836 = DIRECTION('',(-0.,-1.,0.)); +#418837 = ORIENTED_EDGE('',*,*,#418821,.F.); +#418838 = ORIENTED_EDGE('',*,*,#418839,.F.); +#418839 = EDGE_CURVE('',#418822,#418822,#418840,.T.); +#418840 = CIRCLE('',#418841,0.15); +#418841 = AXIS2_PLACEMENT_3D('',#418842,#418843,#418844); +#418842 = CARTESIAN_POINT('',(135.816422,-93.425941,-3.5E-02)); +#418843 = DIRECTION('',(0.,0.,1.)); +#418844 = DIRECTION('',(-0.,-1.,0.)); +#418845 = CYLINDRICAL_SURFACE('',#418846,0.15); +#418846 = AXIS2_PLACEMENT_3D('',#418847,#418848,#418849); +#418847 = CARTESIAN_POINT('',(135.816422,-93.425941,-3.5E-02)); +#418848 = DIRECTION('',(-0.,-0.,-1.)); +#418849 = DIRECTION('',(-0.,-1.,0.)); +#418850 = ADVANCED_FACE('',(#418851,#418854),#418865,.F.); +#418851 = FACE_BOUND('',#418852,.F.); +#418852 = EDGE_LOOP('',(#418853)); +#418853 = ORIENTED_EDGE('',*,*,#418839,.T.); +#418854 = FACE_BOUND('',#418855,.F.); +#418855 = EDGE_LOOP('',(#418856)); +#418856 = ORIENTED_EDGE('',*,*,#418857,.T.); +#418857 = EDGE_CURVE('',#418858,#418858,#418860,.T.); +#418858 = VERTEX_POINT('',#418859); +#418859 = CARTESIAN_POINT('',(135.816422,-93.550941,-3.5E-02)); +#418860 = CIRCLE('',#418861,0.125); +#418861 = AXIS2_PLACEMENT_3D('',#418862,#418863,#418864); +#418862 = CARTESIAN_POINT('',(135.816422,-93.425941,-3.5E-02)); +#418863 = DIRECTION('',(-0.,0.,-1.)); +#418864 = DIRECTION('',(-0.,-1.,0.)); +#418865 = PLANE('',#418866); +#418866 = AXIS2_PLACEMENT_3D('',#418867,#418868,#418869); +#418867 = CARTESIAN_POINT('',(135.816422,-93.575941,-3.5E-02)); +#418868 = DIRECTION('',(0.,0.,1.)); +#418869 = DIRECTION('',(1.,0.,-0.)); +#418870 = ADVANCED_FACE('',(#418871,#418874),#418885,.T.); +#418871 = FACE_BOUND('',#418872,.T.); +#418872 = EDGE_LOOP('',(#418873)); +#418873 = ORIENTED_EDGE('',*,*,#418831,.T.); +#418874 = FACE_BOUND('',#418875,.T.); +#418875 = EDGE_LOOP('',(#418876)); +#418876 = ORIENTED_EDGE('',*,*,#418877,.T.); +#418877 = EDGE_CURVE('',#418878,#418878,#418880,.T.); +#418878 = VERTEX_POINT('',#418879); +#418879 = CARTESIAN_POINT('',(135.816422,-93.550941,1.545)); +#418880 = CIRCLE('',#418881,0.125); +#418881 = AXIS2_PLACEMENT_3D('',#418882,#418883,#418884); +#418882 = CARTESIAN_POINT('',(135.816422,-93.425941,1.545)); +#418883 = DIRECTION('',(-0.,0.,-1.)); +#418884 = DIRECTION('',(-0.,-1.,0.)); +#418885 = PLANE('',#418886); +#418886 = AXIS2_PLACEMENT_3D('',#418887,#418888,#418889); +#418887 = CARTESIAN_POINT('',(135.816422,-93.575941,1.545)); +#418888 = DIRECTION('',(0.,0.,1.)); +#418889 = DIRECTION('',(1.,0.,-0.)); +#418890 = ADVANCED_FACE('',(#418891),#418902,.F.); +#418891 = FACE_BOUND('',#418892,.T.); +#418892 = EDGE_LOOP('',(#418893,#418894,#418900,#418901)); +#418893 = ORIENTED_EDGE('',*,*,#418857,.T.); +#418894 = ORIENTED_EDGE('',*,*,#418895,.T.); +#418895 = EDGE_CURVE('',#418858,#418878,#418896,.T.); +#418896 = LINE('',#418897,#418898); +#418897 = CARTESIAN_POINT('',(135.816422,-93.550941,-3.6E-02)); +#418898 = VECTOR('',#418899,1.); +#418899 = DIRECTION('',(0.,0.,1.)); +#418900 = ORIENTED_EDGE('',*,*,#418877,.F.); +#418901 = ORIENTED_EDGE('',*,*,#418895,.F.); +#418902 = CYLINDRICAL_SURFACE('',#418903,0.125); +#418903 = AXIS2_PLACEMENT_3D('',#418904,#418905,#418906); +#418904 = CARTESIAN_POINT('',(135.816422,-93.425941,-3.6E-02)); +#418905 = DIRECTION('',(-0.,-0.,-1.)); +#418906 = DIRECTION('',(-0.,-1.,0.)); +#418907 = MANIFOLD_SOLID_BREP('',#418908); +#418908 = CLOSED_SHELL('',(#418909,#418942,#418962,#418982)); +#418909 = ADVANCED_FACE('',(#418910),#418937,.T.); +#418910 = FACE_BOUND('',#418911,.F.); +#418911 = EDGE_LOOP('',(#418912,#418922,#418929,#418930)); +#418912 = ORIENTED_EDGE('',*,*,#418913,.T.); +#418913 = EDGE_CURVE('',#418914,#418916,#418918,.T.); +#418914 = VERTEX_POINT('',#418915); +#418915 = CARTESIAN_POINT('',(145.5,-80.65,-3.5E-02)); +#418916 = VERTEX_POINT('',#418917); +#418917 = CARTESIAN_POINT('',(145.5,-80.65,1.545)); +#418918 = LINE('',#418919,#418920); +#418919 = CARTESIAN_POINT('',(145.5,-80.65,-3.5E-02)); +#418920 = VECTOR('',#418921,1.); +#418921 = DIRECTION('',(0.,0.,1.)); +#418922 = ORIENTED_EDGE('',*,*,#418923,.T.); +#418923 = EDGE_CURVE('',#418916,#418916,#418924,.T.); +#418924 = CIRCLE('',#418925,0.15); +#418925 = AXIS2_PLACEMENT_3D('',#418926,#418927,#418928); +#418926 = CARTESIAN_POINT('',(145.5,-80.5,1.545)); +#418927 = DIRECTION('',(0.,0.,1.)); +#418928 = DIRECTION('',(-0.,-1.,0.)); +#418929 = ORIENTED_EDGE('',*,*,#418913,.F.); +#418930 = ORIENTED_EDGE('',*,*,#418931,.F.); +#418931 = EDGE_CURVE('',#418914,#418914,#418932,.T.); +#418932 = CIRCLE('',#418933,0.15); +#418933 = AXIS2_PLACEMENT_3D('',#418934,#418935,#418936); +#418934 = CARTESIAN_POINT('',(145.5,-80.5,-3.5E-02)); +#418935 = DIRECTION('',(0.,0.,1.)); +#418936 = DIRECTION('',(-0.,-1.,0.)); +#418937 = CYLINDRICAL_SURFACE('',#418938,0.15); +#418938 = AXIS2_PLACEMENT_3D('',#418939,#418940,#418941); +#418939 = CARTESIAN_POINT('',(145.5,-80.5,-3.5E-02)); +#418940 = DIRECTION('',(-0.,-0.,-1.)); +#418941 = DIRECTION('',(-0.,-1.,0.)); +#418942 = ADVANCED_FACE('',(#418943,#418946),#418957,.F.); +#418943 = FACE_BOUND('',#418944,.F.); +#418944 = EDGE_LOOP('',(#418945)); +#418945 = ORIENTED_EDGE('',*,*,#418931,.T.); +#418946 = FACE_BOUND('',#418947,.F.); +#418947 = EDGE_LOOP('',(#418948)); +#418948 = ORIENTED_EDGE('',*,*,#418949,.T.); +#418949 = EDGE_CURVE('',#418950,#418950,#418952,.T.); +#418950 = VERTEX_POINT('',#418951); +#418951 = CARTESIAN_POINT('',(145.5,-80.625,-3.5E-02)); +#418952 = CIRCLE('',#418953,0.125); +#418953 = AXIS2_PLACEMENT_3D('',#418954,#418955,#418956); +#418954 = CARTESIAN_POINT('',(145.5,-80.5,-3.5E-02)); +#418955 = DIRECTION('',(-0.,0.,-1.)); +#418956 = DIRECTION('',(-0.,-1.,0.)); +#418957 = PLANE('',#418958); +#418958 = AXIS2_PLACEMENT_3D('',#418959,#418960,#418961); +#418959 = CARTESIAN_POINT('',(145.5,-80.65,-3.5E-02)); +#418960 = DIRECTION('',(0.,0.,1.)); +#418961 = DIRECTION('',(1.,0.,-0.)); +#418962 = ADVANCED_FACE('',(#418963,#418966),#418977,.T.); +#418963 = FACE_BOUND('',#418964,.T.); +#418964 = EDGE_LOOP('',(#418965)); +#418965 = ORIENTED_EDGE('',*,*,#418923,.T.); +#418966 = FACE_BOUND('',#418967,.T.); +#418967 = EDGE_LOOP('',(#418968)); +#418968 = ORIENTED_EDGE('',*,*,#418969,.T.); +#418969 = EDGE_CURVE('',#418970,#418970,#418972,.T.); +#418970 = VERTEX_POINT('',#418971); +#418971 = CARTESIAN_POINT('',(145.5,-80.625,1.545)); +#418972 = CIRCLE('',#418973,0.125); +#418973 = AXIS2_PLACEMENT_3D('',#418974,#418975,#418976); +#418974 = CARTESIAN_POINT('',(145.5,-80.5,1.545)); +#418975 = DIRECTION('',(-0.,0.,-1.)); +#418976 = DIRECTION('',(-0.,-1.,0.)); +#418977 = PLANE('',#418978); +#418978 = AXIS2_PLACEMENT_3D('',#418979,#418980,#418981); +#418979 = CARTESIAN_POINT('',(145.5,-80.65,1.545)); +#418980 = DIRECTION('',(0.,0.,1.)); +#418981 = DIRECTION('',(1.,0.,-0.)); +#418982 = ADVANCED_FACE('',(#418983),#418994,.F.); +#418983 = FACE_BOUND('',#418984,.T.); +#418984 = EDGE_LOOP('',(#418985,#418986,#418992,#418993)); +#418985 = ORIENTED_EDGE('',*,*,#418949,.T.); +#418986 = ORIENTED_EDGE('',*,*,#418987,.T.); +#418987 = EDGE_CURVE('',#418950,#418970,#418988,.T.); +#418988 = LINE('',#418989,#418990); +#418989 = CARTESIAN_POINT('',(145.5,-80.625,-3.6E-02)); +#418990 = VECTOR('',#418991,1.); +#418991 = DIRECTION('',(0.,0.,1.)); +#418992 = ORIENTED_EDGE('',*,*,#418969,.F.); +#418993 = ORIENTED_EDGE('',*,*,#418987,.F.); +#418994 = CYLINDRICAL_SURFACE('',#418995,0.125); +#418995 = AXIS2_PLACEMENT_3D('',#418996,#418997,#418998); +#418996 = CARTESIAN_POINT('',(145.5,-80.5,-3.6E-02)); +#418997 = DIRECTION('',(-0.,-0.,-1.)); +#418998 = DIRECTION('',(-0.,-1.,0.)); +#418999 = MANIFOLD_SOLID_BREP('',#419000); +#419000 = CLOSED_SHELL('',(#419001,#419034,#419054,#419074)); +#419001 = ADVANCED_FACE('',(#419002),#419029,.T.); +#419002 = FACE_BOUND('',#419003,.F.); +#419003 = EDGE_LOOP('',(#419004,#419014,#419021,#419022)); +#419004 = ORIENTED_EDGE('',*,*,#419005,.T.); +#419005 = EDGE_CURVE('',#419006,#419008,#419010,.T.); +#419006 = VERTEX_POINT('',#419007); +#419007 = CARTESIAN_POINT('',(145.,-109.65,-3.5E-02)); +#419008 = VERTEX_POINT('',#419009); +#419009 = CARTESIAN_POINT('',(145.,-109.65,1.545)); +#419010 = LINE('',#419011,#419012); +#419011 = CARTESIAN_POINT('',(145.,-109.65,-3.5E-02)); +#419012 = VECTOR('',#419013,1.); +#419013 = DIRECTION('',(0.,0.,1.)); +#419014 = ORIENTED_EDGE('',*,*,#419015,.T.); +#419015 = EDGE_CURVE('',#419008,#419008,#419016,.T.); +#419016 = CIRCLE('',#419017,0.15); +#419017 = AXIS2_PLACEMENT_3D('',#419018,#419019,#419020); +#419018 = CARTESIAN_POINT('',(145.,-109.5,1.545)); +#419019 = DIRECTION('',(0.,0.,1.)); +#419020 = DIRECTION('',(-0.,-1.,0.)); +#419021 = ORIENTED_EDGE('',*,*,#419005,.F.); +#419022 = ORIENTED_EDGE('',*,*,#419023,.F.); +#419023 = EDGE_CURVE('',#419006,#419006,#419024,.T.); +#419024 = CIRCLE('',#419025,0.15); +#419025 = AXIS2_PLACEMENT_3D('',#419026,#419027,#419028); +#419026 = CARTESIAN_POINT('',(145.,-109.5,-3.5E-02)); +#419027 = DIRECTION('',(0.,0.,1.)); +#419028 = DIRECTION('',(-0.,-1.,0.)); +#419029 = CYLINDRICAL_SURFACE('',#419030,0.15); +#419030 = AXIS2_PLACEMENT_3D('',#419031,#419032,#419033); +#419031 = CARTESIAN_POINT('',(145.,-109.5,-3.5E-02)); +#419032 = DIRECTION('',(-0.,-0.,-1.)); +#419033 = DIRECTION('',(-0.,-1.,0.)); +#419034 = ADVANCED_FACE('',(#419035,#419038),#419049,.F.); +#419035 = FACE_BOUND('',#419036,.F.); +#419036 = EDGE_LOOP('',(#419037)); +#419037 = ORIENTED_EDGE('',*,*,#419023,.T.); +#419038 = FACE_BOUND('',#419039,.F.); +#419039 = EDGE_LOOP('',(#419040)); +#419040 = ORIENTED_EDGE('',*,*,#419041,.T.); +#419041 = EDGE_CURVE('',#419042,#419042,#419044,.T.); +#419042 = VERTEX_POINT('',#419043); +#419043 = CARTESIAN_POINT('',(145.,-109.625,-3.5E-02)); +#419044 = CIRCLE('',#419045,0.125); +#419045 = AXIS2_PLACEMENT_3D('',#419046,#419047,#419048); +#419046 = CARTESIAN_POINT('',(145.,-109.5,-3.5E-02)); +#419047 = DIRECTION('',(-0.,0.,-1.)); +#419048 = DIRECTION('',(-0.,-1.,0.)); +#419049 = PLANE('',#419050); +#419050 = AXIS2_PLACEMENT_3D('',#419051,#419052,#419053); +#419051 = CARTESIAN_POINT('',(145.,-109.65,-3.5E-02)); +#419052 = DIRECTION('',(0.,0.,1.)); +#419053 = DIRECTION('',(1.,0.,-0.)); +#419054 = ADVANCED_FACE('',(#419055,#419058),#419069,.T.); +#419055 = FACE_BOUND('',#419056,.T.); +#419056 = EDGE_LOOP('',(#419057)); +#419057 = ORIENTED_EDGE('',*,*,#419015,.T.); +#419058 = FACE_BOUND('',#419059,.T.); +#419059 = EDGE_LOOP('',(#419060)); +#419060 = ORIENTED_EDGE('',*,*,#419061,.T.); +#419061 = EDGE_CURVE('',#419062,#419062,#419064,.T.); +#419062 = VERTEX_POINT('',#419063); +#419063 = CARTESIAN_POINT('',(145.,-109.625,1.545)); +#419064 = CIRCLE('',#419065,0.125); +#419065 = AXIS2_PLACEMENT_3D('',#419066,#419067,#419068); +#419066 = CARTESIAN_POINT('',(145.,-109.5,1.545)); +#419067 = DIRECTION('',(-0.,0.,-1.)); +#419068 = DIRECTION('',(-0.,-1.,0.)); +#419069 = PLANE('',#419070); +#419070 = AXIS2_PLACEMENT_3D('',#419071,#419072,#419073); +#419071 = CARTESIAN_POINT('',(145.,-109.65,1.545)); +#419072 = DIRECTION('',(0.,0.,1.)); +#419073 = DIRECTION('',(1.,0.,-0.)); +#419074 = ADVANCED_FACE('',(#419075),#419086,.F.); +#419075 = FACE_BOUND('',#419076,.T.); +#419076 = EDGE_LOOP('',(#419077,#419078,#419084,#419085)); +#419077 = ORIENTED_EDGE('',*,*,#419041,.T.); +#419078 = ORIENTED_EDGE('',*,*,#419079,.T.); +#419079 = EDGE_CURVE('',#419042,#419062,#419080,.T.); +#419080 = LINE('',#419081,#419082); +#419081 = CARTESIAN_POINT('',(145.,-109.625,-3.6E-02)); +#419082 = VECTOR('',#419083,1.); +#419083 = DIRECTION('',(0.,0.,1.)); +#419084 = ORIENTED_EDGE('',*,*,#419061,.F.); +#419085 = ORIENTED_EDGE('',*,*,#419079,.F.); +#419086 = CYLINDRICAL_SURFACE('',#419087,0.125); +#419087 = AXIS2_PLACEMENT_3D('',#419088,#419089,#419090); +#419088 = CARTESIAN_POINT('',(145.,-109.5,-3.6E-02)); +#419089 = DIRECTION('',(-0.,-0.,-1.)); +#419090 = DIRECTION('',(-0.,-1.,0.)); +#419091 = MANIFOLD_SOLID_BREP('',#419092); +#419092 = CLOSED_SHELL('',(#419093,#419126,#419146,#419166)); +#419093 = ADVANCED_FACE('',(#419094),#419121,.T.); +#419094 = FACE_BOUND('',#419095,.F.); +#419095 = EDGE_LOOP('',(#419096,#419106,#419113,#419114)); +#419096 = ORIENTED_EDGE('',*,*,#419097,.T.); +#419097 = EDGE_CURVE('',#419098,#419100,#419102,.T.); +#419098 = VERTEX_POINT('',#419099); +#419099 = CARTESIAN_POINT('',(144.934313,-80.084313,-3.5E-02)); +#419100 = VERTEX_POINT('',#419101); +#419101 = CARTESIAN_POINT('',(144.934313,-80.084313,1.545)); +#419102 = LINE('',#419103,#419104); +#419103 = CARTESIAN_POINT('',(144.934313,-80.084313,-3.5E-02)); +#419104 = VECTOR('',#419105,1.); +#419105 = DIRECTION('',(0.,0.,1.)); +#419106 = ORIENTED_EDGE('',*,*,#419107,.T.); +#419107 = EDGE_CURVE('',#419100,#419100,#419108,.T.); +#419108 = CIRCLE('',#419109,0.15); +#419109 = AXIS2_PLACEMENT_3D('',#419110,#419111,#419112); +#419110 = CARTESIAN_POINT('',(144.934313,-79.934313,1.545)); +#419111 = DIRECTION('',(0.,0.,1.)); +#419112 = DIRECTION('',(-0.,-1.,0.)); +#419113 = ORIENTED_EDGE('',*,*,#419097,.F.); +#419114 = ORIENTED_EDGE('',*,*,#419115,.F.); +#419115 = EDGE_CURVE('',#419098,#419098,#419116,.T.); +#419116 = CIRCLE('',#419117,0.15); +#419117 = AXIS2_PLACEMENT_3D('',#419118,#419119,#419120); +#419118 = CARTESIAN_POINT('',(144.934313,-79.934313,-3.5E-02)); +#419119 = DIRECTION('',(0.,0.,1.)); +#419120 = DIRECTION('',(-0.,-1.,0.)); +#419121 = CYLINDRICAL_SURFACE('',#419122,0.15); +#419122 = AXIS2_PLACEMENT_3D('',#419123,#419124,#419125); +#419123 = CARTESIAN_POINT('',(144.934313,-79.934313,-3.5E-02)); +#419124 = DIRECTION('',(-0.,-0.,-1.)); +#419125 = DIRECTION('',(-0.,-1.,0.)); +#419126 = ADVANCED_FACE('',(#419127,#419130),#419141,.F.); +#419127 = FACE_BOUND('',#419128,.F.); +#419128 = EDGE_LOOP('',(#419129)); +#419129 = ORIENTED_EDGE('',*,*,#419115,.T.); +#419130 = FACE_BOUND('',#419131,.F.); +#419131 = EDGE_LOOP('',(#419132)); +#419132 = ORIENTED_EDGE('',*,*,#419133,.T.); +#419133 = EDGE_CURVE('',#419134,#419134,#419136,.T.); +#419134 = VERTEX_POINT('',#419135); +#419135 = CARTESIAN_POINT('',(144.934313,-80.059313,-3.5E-02)); +#419136 = CIRCLE('',#419137,0.125); +#419137 = AXIS2_PLACEMENT_3D('',#419138,#419139,#419140); +#419138 = CARTESIAN_POINT('',(144.934313,-79.934313,-3.5E-02)); +#419139 = DIRECTION('',(-0.,0.,-1.)); +#419140 = DIRECTION('',(-0.,-1.,0.)); +#419141 = PLANE('',#419142); +#419142 = AXIS2_PLACEMENT_3D('',#419143,#419144,#419145); +#419143 = CARTESIAN_POINT('',(144.934313,-80.084313,-3.5E-02)); +#419144 = DIRECTION('',(0.,0.,1.)); +#419145 = DIRECTION('',(1.,0.,-0.)); +#419146 = ADVANCED_FACE('',(#419147,#419150),#419161,.T.); +#419147 = FACE_BOUND('',#419148,.T.); +#419148 = EDGE_LOOP('',(#419149)); +#419149 = ORIENTED_EDGE('',*,*,#419107,.T.); +#419150 = FACE_BOUND('',#419151,.T.); +#419151 = EDGE_LOOP('',(#419152)); +#419152 = ORIENTED_EDGE('',*,*,#419153,.T.); +#419153 = EDGE_CURVE('',#419154,#419154,#419156,.T.); +#419154 = VERTEX_POINT('',#419155); +#419155 = CARTESIAN_POINT('',(144.934313,-80.059313,1.545)); +#419156 = CIRCLE('',#419157,0.125); +#419157 = AXIS2_PLACEMENT_3D('',#419158,#419159,#419160); +#419158 = CARTESIAN_POINT('',(144.934313,-79.934313,1.545)); +#419159 = DIRECTION('',(-0.,0.,-1.)); +#419160 = DIRECTION('',(-0.,-1.,0.)); +#419161 = PLANE('',#419162); +#419162 = AXIS2_PLACEMENT_3D('',#419163,#419164,#419165); +#419163 = CARTESIAN_POINT('',(144.934313,-80.084313,1.545)); +#419164 = DIRECTION('',(0.,0.,1.)); +#419165 = DIRECTION('',(1.,0.,-0.)); +#419166 = ADVANCED_FACE('',(#419167),#419178,.F.); +#419167 = FACE_BOUND('',#419168,.T.); +#419168 = EDGE_LOOP('',(#419169,#419170,#419176,#419177)); +#419169 = ORIENTED_EDGE('',*,*,#419133,.T.); +#419170 = ORIENTED_EDGE('',*,*,#419171,.T.); +#419171 = EDGE_CURVE('',#419134,#419154,#419172,.T.); +#419172 = LINE('',#419173,#419174); +#419173 = CARTESIAN_POINT('',(144.934313,-80.059313,-3.6E-02)); +#419174 = VECTOR('',#419175,1.); +#419175 = DIRECTION('',(0.,0.,1.)); +#419176 = ORIENTED_EDGE('',*,*,#419153,.F.); +#419177 = ORIENTED_EDGE('',*,*,#419171,.F.); +#419178 = CYLINDRICAL_SURFACE('',#419179,0.125); +#419179 = AXIS2_PLACEMENT_3D('',#419180,#419181,#419182); +#419180 = CARTESIAN_POINT('',(144.934313,-79.934313,-3.6E-02)); +#419181 = DIRECTION('',(-0.,-0.,-1.)); +#419182 = DIRECTION('',(-0.,-1.,0.)); +#419183 = MANIFOLD_SOLID_BREP('',#419184); +#419184 = CLOSED_SHELL('',(#419185,#419218,#419238,#419258)); +#419185 = ADVANCED_FACE('',(#419186),#419213,.T.); +#419186 = FACE_BOUND('',#419187,.F.); +#419187 = EDGE_LOOP('',(#419188,#419198,#419205,#419206)); +#419188 = ORIENTED_EDGE('',*,*,#419189,.T.); +#419189 = EDGE_CURVE('',#419190,#419192,#419194,.T.); +#419190 = VERTEX_POINT('',#419191); +#419191 = CARTESIAN_POINT('',(129.,-116.65,-3.5E-02)); +#419192 = VERTEX_POINT('',#419193); +#419193 = CARTESIAN_POINT('',(129.,-116.65,1.545)); +#419194 = LINE('',#419195,#419196); +#419195 = CARTESIAN_POINT('',(129.,-116.65,-3.5E-02)); +#419196 = VECTOR('',#419197,1.); +#419197 = DIRECTION('',(0.,0.,1.)); +#419198 = ORIENTED_EDGE('',*,*,#419199,.T.); +#419199 = EDGE_CURVE('',#419192,#419192,#419200,.T.); +#419200 = CIRCLE('',#419201,0.15); +#419201 = AXIS2_PLACEMENT_3D('',#419202,#419203,#419204); +#419202 = CARTESIAN_POINT('',(129.,-116.5,1.545)); +#419203 = DIRECTION('',(0.,0.,1.)); +#419204 = DIRECTION('',(-0.,-1.,0.)); +#419205 = ORIENTED_EDGE('',*,*,#419189,.F.); +#419206 = ORIENTED_EDGE('',*,*,#419207,.F.); +#419207 = EDGE_CURVE('',#419190,#419190,#419208,.T.); +#419208 = CIRCLE('',#419209,0.15); +#419209 = AXIS2_PLACEMENT_3D('',#419210,#419211,#419212); +#419210 = CARTESIAN_POINT('',(129.,-116.5,-3.5E-02)); +#419211 = DIRECTION('',(0.,0.,1.)); +#419212 = DIRECTION('',(-0.,-1.,0.)); +#419213 = CYLINDRICAL_SURFACE('',#419214,0.15); +#419214 = AXIS2_PLACEMENT_3D('',#419215,#419216,#419217); +#419215 = CARTESIAN_POINT('',(129.,-116.5,-3.5E-02)); +#419216 = DIRECTION('',(-0.,-0.,-1.)); +#419217 = DIRECTION('',(-0.,-1.,0.)); +#419218 = ADVANCED_FACE('',(#419219,#419222),#419233,.F.); +#419219 = FACE_BOUND('',#419220,.F.); +#419220 = EDGE_LOOP('',(#419221)); +#419221 = ORIENTED_EDGE('',*,*,#419207,.T.); +#419222 = FACE_BOUND('',#419223,.F.); +#419223 = EDGE_LOOP('',(#419224)); +#419224 = ORIENTED_EDGE('',*,*,#419225,.T.); +#419225 = EDGE_CURVE('',#419226,#419226,#419228,.T.); +#419226 = VERTEX_POINT('',#419227); +#419227 = CARTESIAN_POINT('',(129.,-116.625,-3.5E-02)); +#419228 = CIRCLE('',#419229,0.125); +#419229 = AXIS2_PLACEMENT_3D('',#419230,#419231,#419232); +#419230 = CARTESIAN_POINT('',(129.,-116.5,-3.5E-02)); +#419231 = DIRECTION('',(-0.,0.,-1.)); +#419232 = DIRECTION('',(-0.,-1.,0.)); +#419233 = PLANE('',#419234); +#419234 = AXIS2_PLACEMENT_3D('',#419235,#419236,#419237); +#419235 = CARTESIAN_POINT('',(129.,-116.65,-3.5E-02)); +#419236 = DIRECTION('',(0.,0.,1.)); +#419237 = DIRECTION('',(1.,0.,-0.)); +#419238 = ADVANCED_FACE('',(#419239,#419242),#419253,.T.); +#419239 = FACE_BOUND('',#419240,.T.); +#419240 = EDGE_LOOP('',(#419241)); +#419241 = ORIENTED_EDGE('',*,*,#419199,.T.); +#419242 = FACE_BOUND('',#419243,.T.); +#419243 = EDGE_LOOP('',(#419244)); +#419244 = ORIENTED_EDGE('',*,*,#419245,.T.); +#419245 = EDGE_CURVE('',#419246,#419246,#419248,.T.); +#419246 = VERTEX_POINT('',#419247); +#419247 = CARTESIAN_POINT('',(129.,-116.625,1.545)); +#419248 = CIRCLE('',#419249,0.125); +#419249 = AXIS2_PLACEMENT_3D('',#419250,#419251,#419252); +#419250 = CARTESIAN_POINT('',(129.,-116.5,1.545)); +#419251 = DIRECTION('',(-0.,0.,-1.)); +#419252 = DIRECTION('',(-0.,-1.,0.)); +#419253 = PLANE('',#419254); +#419254 = AXIS2_PLACEMENT_3D('',#419255,#419256,#419257); +#419255 = CARTESIAN_POINT('',(129.,-116.65,1.545)); +#419256 = DIRECTION('',(0.,0.,1.)); +#419257 = DIRECTION('',(1.,0.,-0.)); +#419258 = ADVANCED_FACE('',(#419259),#419270,.F.); +#419259 = FACE_BOUND('',#419260,.T.); +#419260 = EDGE_LOOP('',(#419261,#419262,#419268,#419269)); +#419261 = ORIENTED_EDGE('',*,*,#419225,.T.); +#419262 = ORIENTED_EDGE('',*,*,#419263,.T.); +#419263 = EDGE_CURVE('',#419226,#419246,#419264,.T.); +#419264 = LINE('',#419265,#419266); +#419265 = CARTESIAN_POINT('',(129.,-116.625,-3.6E-02)); +#419266 = VECTOR('',#419267,1.); +#419267 = DIRECTION('',(0.,0.,1.)); +#419268 = ORIENTED_EDGE('',*,*,#419245,.F.); +#419269 = ORIENTED_EDGE('',*,*,#419263,.F.); +#419270 = CYLINDRICAL_SURFACE('',#419271,0.125); +#419271 = AXIS2_PLACEMENT_3D('',#419272,#419273,#419274); +#419272 = CARTESIAN_POINT('',(129.,-116.5,-3.6E-02)); +#419273 = DIRECTION('',(-0.,-0.,-1.)); +#419274 = DIRECTION('',(-0.,-1.,0.)); +#419275 = MANIFOLD_SOLID_BREP('',#419276); +#419276 = CLOSED_SHELL('',(#419277,#419310,#419330,#419350)); +#419277 = ADVANCED_FACE('',(#419278),#419305,.T.); +#419278 = FACE_BOUND('',#419279,.F.); +#419279 = EDGE_LOOP('',(#419280,#419290,#419297,#419298)); +#419280 = ORIENTED_EDGE('',*,*,#419281,.T.); +#419281 = EDGE_CURVE('',#419282,#419284,#419286,.T.); +#419282 = VERTEX_POINT('',#419283); +#419283 = CARTESIAN_POINT('',(144.,-87.15,-3.5E-02)); +#419284 = VERTEX_POINT('',#419285); +#419285 = CARTESIAN_POINT('',(144.,-87.15,1.545)); +#419286 = LINE('',#419287,#419288); +#419287 = CARTESIAN_POINT('',(144.,-87.15,-3.5E-02)); +#419288 = VECTOR('',#419289,1.); +#419289 = DIRECTION('',(0.,0.,1.)); +#419290 = ORIENTED_EDGE('',*,*,#419291,.T.); +#419291 = EDGE_CURVE('',#419284,#419284,#419292,.T.); +#419292 = CIRCLE('',#419293,0.15); +#419293 = AXIS2_PLACEMENT_3D('',#419294,#419295,#419296); +#419294 = CARTESIAN_POINT('',(144.,-87.,1.545)); +#419295 = DIRECTION('',(0.,0.,1.)); +#419296 = DIRECTION('',(-0.,-1.,0.)); +#419297 = ORIENTED_EDGE('',*,*,#419281,.F.); +#419298 = ORIENTED_EDGE('',*,*,#419299,.F.); +#419299 = EDGE_CURVE('',#419282,#419282,#419300,.T.); +#419300 = CIRCLE('',#419301,0.15); +#419301 = AXIS2_PLACEMENT_3D('',#419302,#419303,#419304); +#419302 = CARTESIAN_POINT('',(144.,-87.,-3.5E-02)); +#419303 = DIRECTION('',(0.,0.,1.)); +#419304 = DIRECTION('',(-0.,-1.,0.)); +#419305 = CYLINDRICAL_SURFACE('',#419306,0.15); +#419306 = AXIS2_PLACEMENT_3D('',#419307,#419308,#419309); +#419307 = CARTESIAN_POINT('',(144.,-87.,-3.5E-02)); +#419308 = DIRECTION('',(-0.,-0.,-1.)); +#419309 = DIRECTION('',(-0.,-1.,0.)); +#419310 = ADVANCED_FACE('',(#419311,#419314),#419325,.F.); +#419311 = FACE_BOUND('',#419312,.F.); +#419312 = EDGE_LOOP('',(#419313)); +#419313 = ORIENTED_EDGE('',*,*,#419299,.T.); +#419314 = FACE_BOUND('',#419315,.F.); +#419315 = EDGE_LOOP('',(#419316)); +#419316 = ORIENTED_EDGE('',*,*,#419317,.T.); +#419317 = EDGE_CURVE('',#419318,#419318,#419320,.T.); +#419318 = VERTEX_POINT('',#419319); +#419319 = CARTESIAN_POINT('',(144.,-87.125,-3.5E-02)); +#419320 = CIRCLE('',#419321,0.125); +#419321 = AXIS2_PLACEMENT_3D('',#419322,#419323,#419324); +#419322 = CARTESIAN_POINT('',(144.,-87.,-3.5E-02)); +#419323 = DIRECTION('',(-0.,0.,-1.)); +#419324 = DIRECTION('',(-0.,-1.,0.)); +#419325 = PLANE('',#419326); +#419326 = AXIS2_PLACEMENT_3D('',#419327,#419328,#419329); +#419327 = CARTESIAN_POINT('',(144.,-87.15,-3.5E-02)); +#419328 = DIRECTION('',(0.,0.,1.)); +#419329 = DIRECTION('',(1.,0.,-0.)); +#419330 = ADVANCED_FACE('',(#419331,#419334),#419345,.T.); +#419331 = FACE_BOUND('',#419332,.T.); +#419332 = EDGE_LOOP('',(#419333)); +#419333 = ORIENTED_EDGE('',*,*,#419291,.T.); +#419334 = FACE_BOUND('',#419335,.T.); +#419335 = EDGE_LOOP('',(#419336)); +#419336 = ORIENTED_EDGE('',*,*,#419337,.T.); +#419337 = EDGE_CURVE('',#419338,#419338,#419340,.T.); +#419338 = VERTEX_POINT('',#419339); +#419339 = CARTESIAN_POINT('',(144.,-87.125,1.545)); +#419340 = CIRCLE('',#419341,0.125); +#419341 = AXIS2_PLACEMENT_3D('',#419342,#419343,#419344); +#419342 = CARTESIAN_POINT('',(144.,-87.,1.545)); +#419343 = DIRECTION('',(-0.,0.,-1.)); +#419344 = DIRECTION('',(-0.,-1.,0.)); +#419345 = PLANE('',#419346); +#419346 = AXIS2_PLACEMENT_3D('',#419347,#419348,#419349); +#419347 = CARTESIAN_POINT('',(144.,-87.15,1.545)); +#419348 = DIRECTION('',(0.,0.,1.)); +#419349 = DIRECTION('',(1.,0.,-0.)); +#419350 = ADVANCED_FACE('',(#419351),#419362,.F.); +#419351 = FACE_BOUND('',#419352,.T.); +#419352 = EDGE_LOOP('',(#419353,#419354,#419360,#419361)); +#419353 = ORIENTED_EDGE('',*,*,#419317,.T.); +#419354 = ORIENTED_EDGE('',*,*,#419355,.T.); +#419355 = EDGE_CURVE('',#419318,#419338,#419356,.T.); +#419356 = LINE('',#419357,#419358); +#419357 = CARTESIAN_POINT('',(144.,-87.125,-3.6E-02)); +#419358 = VECTOR('',#419359,1.); +#419359 = DIRECTION('',(0.,0.,1.)); +#419360 = ORIENTED_EDGE('',*,*,#419337,.F.); +#419361 = ORIENTED_EDGE('',*,*,#419355,.F.); +#419362 = CYLINDRICAL_SURFACE('',#419363,0.125); +#419363 = AXIS2_PLACEMENT_3D('',#419364,#419365,#419366); +#419364 = CARTESIAN_POINT('',(144.,-87.,-3.6E-02)); +#419365 = DIRECTION('',(-0.,-0.,-1.)); +#419366 = DIRECTION('',(-0.,-1.,0.)); +#419367 = MANIFOLD_SOLID_BREP('',#419368); +#419368 = CLOSED_SHELL('',(#419369,#419402,#419422,#419442)); +#419369 = ADVANCED_FACE('',(#419370),#419397,.T.); +#419370 = FACE_BOUND('',#419371,.F.); +#419371 = EDGE_LOOP('',(#419372,#419382,#419389,#419390)); +#419372 = ORIENTED_EDGE('',*,*,#419373,.T.); +#419373 = EDGE_CURVE('',#419374,#419376,#419378,.T.); +#419374 = VERTEX_POINT('',#419375); +#419375 = CARTESIAN_POINT('',(133.5,-116.55,-3.5E-02)); +#419376 = VERTEX_POINT('',#419377); +#419377 = CARTESIAN_POINT('',(133.5,-116.55,1.545)); +#419378 = LINE('',#419379,#419380); +#419379 = CARTESIAN_POINT('',(133.5,-116.55,-3.5E-02)); +#419380 = VECTOR('',#419381,1.); +#419381 = DIRECTION('',(0.,0.,1.)); +#419382 = ORIENTED_EDGE('',*,*,#419383,.T.); +#419383 = EDGE_CURVE('',#419376,#419376,#419384,.T.); +#419384 = CIRCLE('',#419385,0.15); +#419385 = AXIS2_PLACEMENT_3D('',#419386,#419387,#419388); +#419386 = CARTESIAN_POINT('',(133.5,-116.4,1.545)); +#419387 = DIRECTION('',(0.,0.,1.)); +#419388 = DIRECTION('',(-0.,-1.,0.)); +#419389 = ORIENTED_EDGE('',*,*,#419373,.F.); +#419390 = ORIENTED_EDGE('',*,*,#419391,.F.); +#419391 = EDGE_CURVE('',#419374,#419374,#419392,.T.); +#419392 = CIRCLE('',#419393,0.15); +#419393 = AXIS2_PLACEMENT_3D('',#419394,#419395,#419396); +#419394 = CARTESIAN_POINT('',(133.5,-116.4,-3.5E-02)); +#419395 = DIRECTION('',(0.,0.,1.)); +#419396 = DIRECTION('',(-0.,-1.,0.)); +#419397 = CYLINDRICAL_SURFACE('',#419398,0.15); +#419398 = AXIS2_PLACEMENT_3D('',#419399,#419400,#419401); +#419399 = CARTESIAN_POINT('',(133.5,-116.4,-3.5E-02)); +#419400 = DIRECTION('',(-0.,-0.,-1.)); +#419401 = DIRECTION('',(-0.,-1.,0.)); +#419402 = ADVANCED_FACE('',(#419403,#419406),#419417,.F.); +#419403 = FACE_BOUND('',#419404,.F.); +#419404 = EDGE_LOOP('',(#419405)); +#419405 = ORIENTED_EDGE('',*,*,#419391,.T.); +#419406 = FACE_BOUND('',#419407,.F.); +#419407 = EDGE_LOOP('',(#419408)); +#419408 = ORIENTED_EDGE('',*,*,#419409,.T.); +#419409 = EDGE_CURVE('',#419410,#419410,#419412,.T.); +#419410 = VERTEX_POINT('',#419411); +#419411 = CARTESIAN_POINT('',(133.5,-116.525,-3.5E-02)); +#419412 = CIRCLE('',#419413,0.125); +#419413 = AXIS2_PLACEMENT_3D('',#419414,#419415,#419416); +#419414 = CARTESIAN_POINT('',(133.5,-116.4,-3.5E-02)); +#419415 = DIRECTION('',(-0.,0.,-1.)); +#419416 = DIRECTION('',(-0.,-1.,0.)); +#419417 = PLANE('',#419418); +#419418 = AXIS2_PLACEMENT_3D('',#419419,#419420,#419421); +#419419 = CARTESIAN_POINT('',(133.5,-116.55,-3.5E-02)); +#419420 = DIRECTION('',(0.,0.,1.)); +#419421 = DIRECTION('',(1.,0.,-0.)); +#419422 = ADVANCED_FACE('',(#419423,#419426),#419437,.T.); +#419423 = FACE_BOUND('',#419424,.T.); +#419424 = EDGE_LOOP('',(#419425)); +#419425 = ORIENTED_EDGE('',*,*,#419383,.T.); +#419426 = FACE_BOUND('',#419427,.T.); +#419427 = EDGE_LOOP('',(#419428)); +#419428 = ORIENTED_EDGE('',*,*,#419429,.T.); +#419429 = EDGE_CURVE('',#419430,#419430,#419432,.T.); +#419430 = VERTEX_POINT('',#419431); +#419431 = CARTESIAN_POINT('',(133.5,-116.525,1.545)); +#419432 = CIRCLE('',#419433,0.125); +#419433 = AXIS2_PLACEMENT_3D('',#419434,#419435,#419436); +#419434 = CARTESIAN_POINT('',(133.5,-116.4,1.545)); +#419435 = DIRECTION('',(-0.,0.,-1.)); +#419436 = DIRECTION('',(-0.,-1.,0.)); +#419437 = PLANE('',#419438); +#419438 = AXIS2_PLACEMENT_3D('',#419439,#419440,#419441); +#419439 = CARTESIAN_POINT('',(133.5,-116.55,1.545)); +#419440 = DIRECTION('',(0.,0.,1.)); +#419441 = DIRECTION('',(1.,0.,-0.)); +#419442 = ADVANCED_FACE('',(#419443),#419454,.F.); +#419443 = FACE_BOUND('',#419444,.T.); +#419444 = EDGE_LOOP('',(#419445,#419446,#419452,#419453)); +#419445 = ORIENTED_EDGE('',*,*,#419409,.T.); +#419446 = ORIENTED_EDGE('',*,*,#419447,.T.); +#419447 = EDGE_CURVE('',#419410,#419430,#419448,.T.); +#419448 = LINE('',#419449,#419450); +#419449 = CARTESIAN_POINT('',(133.5,-116.525,-3.6E-02)); +#419450 = VECTOR('',#419451,1.); +#419451 = DIRECTION('',(0.,0.,1.)); +#419452 = ORIENTED_EDGE('',*,*,#419429,.F.); +#419453 = ORIENTED_EDGE('',*,*,#419447,.F.); +#419454 = CYLINDRICAL_SURFACE('',#419455,0.125); +#419455 = AXIS2_PLACEMENT_3D('',#419456,#419457,#419458); +#419456 = CARTESIAN_POINT('',(133.5,-116.4,-3.6E-02)); +#419457 = DIRECTION('',(-0.,-0.,-1.)); +#419458 = DIRECTION('',(-0.,-1.,0.)); +#419459 = MANIFOLD_SOLID_BREP('',#419460); +#419460 = CLOSED_SHELL('',(#419461,#419494,#419514,#419534)); +#419461 = ADVANCED_FACE('',(#419462),#419489,.T.); +#419462 = FACE_BOUND('',#419463,.F.); +#419463 = EDGE_LOOP('',(#419464,#419474,#419481,#419482)); +#419464 = ORIENTED_EDGE('',*,*,#419465,.T.); +#419465 = EDGE_CURVE('',#419466,#419468,#419470,.T.); +#419466 = VERTEX_POINT('',#419467); +#419467 = CARTESIAN_POINT('',(141.5,-115.537868,-3.5E-02)); +#419468 = VERTEX_POINT('',#419469); +#419469 = CARTESIAN_POINT('',(141.5,-115.537868,1.545)); +#419470 = LINE('',#419471,#419472); +#419471 = CARTESIAN_POINT('',(141.5,-115.537868,-3.5E-02)); +#419472 = VECTOR('',#419473,1.); +#419473 = DIRECTION('',(0.,0.,1.)); +#419474 = ORIENTED_EDGE('',*,*,#419475,.T.); +#419475 = EDGE_CURVE('',#419468,#419468,#419476,.T.); +#419476 = CIRCLE('',#419477,0.15); +#419477 = AXIS2_PLACEMENT_3D('',#419478,#419479,#419480); +#419478 = CARTESIAN_POINT('',(141.5,-115.387868,1.545)); +#419479 = DIRECTION('',(0.,0.,1.)); +#419480 = DIRECTION('',(-0.,-1.,0.)); +#419481 = ORIENTED_EDGE('',*,*,#419465,.F.); +#419482 = ORIENTED_EDGE('',*,*,#419483,.F.); +#419483 = EDGE_CURVE('',#419466,#419466,#419484,.T.); +#419484 = CIRCLE('',#419485,0.15); +#419485 = AXIS2_PLACEMENT_3D('',#419486,#419487,#419488); +#419486 = CARTESIAN_POINT('',(141.5,-115.387868,-3.5E-02)); +#419487 = DIRECTION('',(0.,0.,1.)); +#419488 = DIRECTION('',(-0.,-1.,0.)); +#419489 = CYLINDRICAL_SURFACE('',#419490,0.15); +#419490 = AXIS2_PLACEMENT_3D('',#419491,#419492,#419493); +#419491 = CARTESIAN_POINT('',(141.5,-115.387868,-3.5E-02)); +#419492 = DIRECTION('',(-0.,-0.,-1.)); +#419493 = DIRECTION('',(-0.,-1.,0.)); +#419494 = ADVANCED_FACE('',(#419495,#419498),#419509,.F.); +#419495 = FACE_BOUND('',#419496,.F.); +#419496 = EDGE_LOOP('',(#419497)); +#419497 = ORIENTED_EDGE('',*,*,#419483,.T.); +#419498 = FACE_BOUND('',#419499,.F.); +#419499 = EDGE_LOOP('',(#419500)); +#419500 = ORIENTED_EDGE('',*,*,#419501,.T.); +#419501 = EDGE_CURVE('',#419502,#419502,#419504,.T.); +#419502 = VERTEX_POINT('',#419503); +#419503 = CARTESIAN_POINT('',(141.5,-115.512868,-3.5E-02)); +#419504 = CIRCLE('',#419505,0.125); +#419505 = AXIS2_PLACEMENT_3D('',#419506,#419507,#419508); +#419506 = CARTESIAN_POINT('',(141.5,-115.387868,-3.5E-02)); +#419507 = DIRECTION('',(-0.,0.,-1.)); +#419508 = DIRECTION('',(-0.,-1.,0.)); +#419509 = PLANE('',#419510); +#419510 = AXIS2_PLACEMENT_3D('',#419511,#419512,#419513); +#419511 = CARTESIAN_POINT('',(141.5,-115.537868,-3.5E-02)); +#419512 = DIRECTION('',(0.,0.,1.)); +#419513 = DIRECTION('',(1.,0.,-0.)); +#419514 = ADVANCED_FACE('',(#419515,#419518),#419529,.T.); +#419515 = FACE_BOUND('',#419516,.T.); +#419516 = EDGE_LOOP('',(#419517)); +#419517 = ORIENTED_EDGE('',*,*,#419475,.T.); +#419518 = FACE_BOUND('',#419519,.T.); +#419519 = EDGE_LOOP('',(#419520)); +#419520 = ORIENTED_EDGE('',*,*,#419521,.T.); +#419521 = EDGE_CURVE('',#419522,#419522,#419524,.T.); +#419522 = VERTEX_POINT('',#419523); +#419523 = CARTESIAN_POINT('',(141.5,-115.512868,1.545)); +#419524 = CIRCLE('',#419525,0.125); +#419525 = AXIS2_PLACEMENT_3D('',#419526,#419527,#419528); +#419526 = CARTESIAN_POINT('',(141.5,-115.387868,1.545)); +#419527 = DIRECTION('',(-0.,0.,-1.)); +#419528 = DIRECTION('',(-0.,-1.,0.)); +#419529 = PLANE('',#419530); +#419530 = AXIS2_PLACEMENT_3D('',#419531,#419532,#419533); +#419531 = CARTESIAN_POINT('',(141.5,-115.537868,1.545)); +#419532 = DIRECTION('',(0.,0.,1.)); +#419533 = DIRECTION('',(1.,0.,-0.)); +#419534 = ADVANCED_FACE('',(#419535),#419546,.F.); +#419535 = FACE_BOUND('',#419536,.T.); +#419536 = EDGE_LOOP('',(#419537,#419538,#419544,#419545)); +#419537 = ORIENTED_EDGE('',*,*,#419501,.T.); +#419538 = ORIENTED_EDGE('',*,*,#419539,.T.); +#419539 = EDGE_CURVE('',#419502,#419522,#419540,.T.); +#419540 = LINE('',#419541,#419542); +#419541 = CARTESIAN_POINT('',(141.5,-115.512868,-3.6E-02)); +#419542 = VECTOR('',#419543,1.); +#419543 = DIRECTION('',(0.,0.,1.)); +#419544 = ORIENTED_EDGE('',*,*,#419521,.F.); +#419545 = ORIENTED_EDGE('',*,*,#419539,.F.); +#419546 = CYLINDRICAL_SURFACE('',#419547,0.125); +#419547 = AXIS2_PLACEMENT_3D('',#419548,#419549,#419550); +#419548 = CARTESIAN_POINT('',(141.5,-115.387868,-3.6E-02)); +#419549 = DIRECTION('',(-0.,-0.,-1.)); +#419550 = DIRECTION('',(-0.,-1.,0.)); +#419551 = MANIFOLD_SOLID_BREP('',#419552); +#419552 = CLOSED_SHELL('',(#419553,#419586,#419606,#419626)); +#419553 = ADVANCED_FACE('',(#419554),#419581,.T.); +#419554 = FACE_BOUND('',#419555,.F.); +#419555 = EDGE_LOOP('',(#419556,#419566,#419573,#419574)); +#419556 = ORIENTED_EDGE('',*,*,#419557,.T.); +#419557 = EDGE_CURVE('',#419558,#419560,#419562,.T.); +#419558 = VERTEX_POINT('',#419559); +#419559 = CARTESIAN_POINT('',(145.,-78.65,-3.5E-02)); +#419560 = VERTEX_POINT('',#419561); +#419561 = CARTESIAN_POINT('',(145.,-78.65,1.545)); +#419562 = LINE('',#419563,#419564); +#419563 = CARTESIAN_POINT('',(145.,-78.65,-3.5E-02)); +#419564 = VECTOR('',#419565,1.); +#419565 = DIRECTION('',(0.,0.,1.)); +#419566 = ORIENTED_EDGE('',*,*,#419567,.T.); +#419567 = EDGE_CURVE('',#419560,#419560,#419568,.T.); +#419568 = CIRCLE('',#419569,0.15); +#419569 = AXIS2_PLACEMENT_3D('',#419570,#419571,#419572); +#419570 = CARTESIAN_POINT('',(145.,-78.5,1.545)); +#419571 = DIRECTION('',(0.,0.,1.)); +#419572 = DIRECTION('',(-0.,-1.,0.)); +#419573 = ORIENTED_EDGE('',*,*,#419557,.F.); +#419574 = ORIENTED_EDGE('',*,*,#419575,.F.); +#419575 = EDGE_CURVE('',#419558,#419558,#419576,.T.); +#419576 = CIRCLE('',#419577,0.15); +#419577 = AXIS2_PLACEMENT_3D('',#419578,#419579,#419580); +#419578 = CARTESIAN_POINT('',(145.,-78.5,-3.5E-02)); +#419579 = DIRECTION('',(0.,0.,1.)); +#419580 = DIRECTION('',(-0.,-1.,0.)); +#419581 = CYLINDRICAL_SURFACE('',#419582,0.15); +#419582 = AXIS2_PLACEMENT_3D('',#419583,#419584,#419585); +#419583 = CARTESIAN_POINT('',(145.,-78.5,-3.5E-02)); +#419584 = DIRECTION('',(-0.,-0.,-1.)); +#419585 = DIRECTION('',(-0.,-1.,0.)); +#419586 = ADVANCED_FACE('',(#419587,#419590),#419601,.F.); +#419587 = FACE_BOUND('',#419588,.F.); +#419588 = EDGE_LOOP('',(#419589)); +#419589 = ORIENTED_EDGE('',*,*,#419575,.T.); +#419590 = FACE_BOUND('',#419591,.F.); +#419591 = EDGE_LOOP('',(#419592)); +#419592 = ORIENTED_EDGE('',*,*,#419593,.T.); +#419593 = EDGE_CURVE('',#419594,#419594,#419596,.T.); +#419594 = VERTEX_POINT('',#419595); +#419595 = CARTESIAN_POINT('',(145.,-78.625,-3.5E-02)); +#419596 = CIRCLE('',#419597,0.125); +#419597 = AXIS2_PLACEMENT_3D('',#419598,#419599,#419600); +#419598 = CARTESIAN_POINT('',(145.,-78.5,-3.5E-02)); +#419599 = DIRECTION('',(-0.,0.,-1.)); +#419600 = DIRECTION('',(-0.,-1.,0.)); +#419601 = PLANE('',#419602); +#419602 = AXIS2_PLACEMENT_3D('',#419603,#419604,#419605); +#419603 = CARTESIAN_POINT('',(145.,-78.65,-3.5E-02)); +#419604 = DIRECTION('',(0.,0.,1.)); +#419605 = DIRECTION('',(1.,0.,-0.)); +#419606 = ADVANCED_FACE('',(#419607,#419610),#419621,.T.); +#419607 = FACE_BOUND('',#419608,.T.); +#419608 = EDGE_LOOP('',(#419609)); +#419609 = ORIENTED_EDGE('',*,*,#419567,.T.); +#419610 = FACE_BOUND('',#419611,.T.); +#419611 = EDGE_LOOP('',(#419612)); +#419612 = ORIENTED_EDGE('',*,*,#419613,.T.); +#419613 = EDGE_CURVE('',#419614,#419614,#419616,.T.); +#419614 = VERTEX_POINT('',#419615); +#419615 = CARTESIAN_POINT('',(145.,-78.625,1.545)); +#419616 = CIRCLE('',#419617,0.125); +#419617 = AXIS2_PLACEMENT_3D('',#419618,#419619,#419620); +#419618 = CARTESIAN_POINT('',(145.,-78.5,1.545)); +#419619 = DIRECTION('',(-0.,0.,-1.)); +#419620 = DIRECTION('',(-0.,-1.,0.)); +#419621 = PLANE('',#419622); +#419622 = AXIS2_PLACEMENT_3D('',#419623,#419624,#419625); +#419623 = CARTESIAN_POINT('',(145.,-78.65,1.545)); +#419624 = DIRECTION('',(0.,0.,1.)); +#419625 = DIRECTION('',(1.,0.,-0.)); +#419626 = ADVANCED_FACE('',(#419627),#419638,.F.); +#419627 = FACE_BOUND('',#419628,.T.); +#419628 = EDGE_LOOP('',(#419629,#419630,#419636,#419637)); +#419629 = ORIENTED_EDGE('',*,*,#419593,.T.); +#419630 = ORIENTED_EDGE('',*,*,#419631,.T.); +#419631 = EDGE_CURVE('',#419594,#419614,#419632,.T.); +#419632 = LINE('',#419633,#419634); +#419633 = CARTESIAN_POINT('',(145.,-78.625,-3.6E-02)); +#419634 = VECTOR('',#419635,1.); +#419635 = DIRECTION('',(0.,0.,1.)); +#419636 = ORIENTED_EDGE('',*,*,#419613,.F.); +#419637 = ORIENTED_EDGE('',*,*,#419631,.F.); +#419638 = CYLINDRICAL_SURFACE('',#419639,0.125); +#419639 = AXIS2_PLACEMENT_3D('',#419640,#419641,#419642); +#419640 = CARTESIAN_POINT('',(145.,-78.5,-3.6E-02)); +#419641 = DIRECTION('',(-0.,-0.,-1.)); +#419642 = DIRECTION('',(-0.,-1.,0.)); +#419643 = MANIFOLD_SOLID_BREP('',#419644); +#419644 = CLOSED_SHELL('',(#419645,#419678,#419698,#419718)); +#419645 = ADVANCED_FACE('',(#419646),#419673,.T.); +#419646 = FACE_BOUND('',#419647,.F.); +#419647 = EDGE_LOOP('',(#419648,#419658,#419665,#419666)); +#419648 = ORIENTED_EDGE('',*,*,#419649,.T.); +#419649 = EDGE_CURVE('',#419650,#419652,#419654,.T.); +#419650 = VERTEX_POINT('',#419651); +#419651 = CARTESIAN_POINT('',(148.5,-90.452943,-3.5E-02)); +#419652 = VERTEX_POINT('',#419653); +#419653 = CARTESIAN_POINT('',(148.5,-90.452943,1.545)); +#419654 = LINE('',#419655,#419656); +#419655 = CARTESIAN_POINT('',(148.5,-90.452943,-3.5E-02)); +#419656 = VECTOR('',#419657,1.); +#419657 = DIRECTION('',(0.,0.,1.)); +#419658 = ORIENTED_EDGE('',*,*,#419659,.T.); +#419659 = EDGE_CURVE('',#419652,#419652,#419660,.T.); +#419660 = CIRCLE('',#419661,0.15); +#419661 = AXIS2_PLACEMENT_3D('',#419662,#419663,#419664); +#419662 = CARTESIAN_POINT('',(148.5,-90.302943,1.545)); +#419663 = DIRECTION('',(0.,0.,1.)); +#419664 = DIRECTION('',(-0.,-1.,0.)); +#419665 = ORIENTED_EDGE('',*,*,#419649,.F.); +#419666 = ORIENTED_EDGE('',*,*,#419667,.F.); +#419667 = EDGE_CURVE('',#419650,#419650,#419668,.T.); +#419668 = CIRCLE('',#419669,0.15); +#419669 = AXIS2_PLACEMENT_3D('',#419670,#419671,#419672); +#419670 = CARTESIAN_POINT('',(148.5,-90.302943,-3.5E-02)); +#419671 = DIRECTION('',(0.,0.,1.)); +#419672 = DIRECTION('',(-0.,-1.,0.)); +#419673 = CYLINDRICAL_SURFACE('',#419674,0.15); +#419674 = AXIS2_PLACEMENT_3D('',#419675,#419676,#419677); +#419675 = CARTESIAN_POINT('',(148.5,-90.302943,-3.5E-02)); +#419676 = DIRECTION('',(-0.,-0.,-1.)); +#419677 = DIRECTION('',(-0.,-1.,0.)); +#419678 = ADVANCED_FACE('',(#419679,#419682),#419693,.F.); +#419679 = FACE_BOUND('',#419680,.F.); +#419680 = EDGE_LOOP('',(#419681)); +#419681 = ORIENTED_EDGE('',*,*,#419667,.T.); +#419682 = FACE_BOUND('',#419683,.F.); +#419683 = EDGE_LOOP('',(#419684)); +#419684 = ORIENTED_EDGE('',*,*,#419685,.T.); +#419685 = EDGE_CURVE('',#419686,#419686,#419688,.T.); +#419686 = VERTEX_POINT('',#419687); +#419687 = CARTESIAN_POINT('',(148.5,-90.427943,-3.5E-02)); +#419688 = CIRCLE('',#419689,0.125); +#419689 = AXIS2_PLACEMENT_3D('',#419690,#419691,#419692); +#419690 = CARTESIAN_POINT('',(148.5,-90.302943,-3.5E-02)); +#419691 = DIRECTION('',(-0.,0.,-1.)); +#419692 = DIRECTION('',(-0.,-1.,0.)); +#419693 = PLANE('',#419694); +#419694 = AXIS2_PLACEMENT_3D('',#419695,#419696,#419697); +#419695 = CARTESIAN_POINT('',(148.5,-90.452943,-3.5E-02)); +#419696 = DIRECTION('',(0.,0.,1.)); +#419697 = DIRECTION('',(1.,0.,-0.)); +#419698 = ADVANCED_FACE('',(#419699,#419702),#419713,.T.); +#419699 = FACE_BOUND('',#419700,.T.); +#419700 = EDGE_LOOP('',(#419701)); +#419701 = ORIENTED_EDGE('',*,*,#419659,.T.); +#419702 = FACE_BOUND('',#419703,.T.); +#419703 = EDGE_LOOP('',(#419704)); +#419704 = ORIENTED_EDGE('',*,*,#419705,.T.); +#419705 = EDGE_CURVE('',#419706,#419706,#419708,.T.); +#419706 = VERTEX_POINT('',#419707); +#419707 = CARTESIAN_POINT('',(148.5,-90.427943,1.545)); +#419708 = CIRCLE('',#419709,0.125); +#419709 = AXIS2_PLACEMENT_3D('',#419710,#419711,#419712); +#419710 = CARTESIAN_POINT('',(148.5,-90.302943,1.545)); +#419711 = DIRECTION('',(-0.,0.,-1.)); +#419712 = DIRECTION('',(-0.,-1.,0.)); +#419713 = PLANE('',#419714); +#419714 = AXIS2_PLACEMENT_3D('',#419715,#419716,#419717); +#419715 = CARTESIAN_POINT('',(148.5,-90.452943,1.545)); +#419716 = DIRECTION('',(0.,0.,1.)); +#419717 = DIRECTION('',(1.,0.,-0.)); +#419718 = ADVANCED_FACE('',(#419719),#419730,.F.); +#419719 = FACE_BOUND('',#419720,.T.); +#419720 = EDGE_LOOP('',(#419721,#419722,#419728,#419729)); +#419721 = ORIENTED_EDGE('',*,*,#419685,.T.); +#419722 = ORIENTED_EDGE('',*,*,#419723,.T.); +#419723 = EDGE_CURVE('',#419686,#419706,#419724,.T.); +#419724 = LINE('',#419725,#419726); +#419725 = CARTESIAN_POINT('',(148.5,-90.427943,-3.6E-02)); +#419726 = VECTOR('',#419727,1.); +#419727 = DIRECTION('',(0.,0.,1.)); +#419728 = ORIENTED_EDGE('',*,*,#419705,.F.); +#419729 = ORIENTED_EDGE('',*,*,#419723,.F.); +#419730 = CYLINDRICAL_SURFACE('',#419731,0.125); +#419731 = AXIS2_PLACEMENT_3D('',#419732,#419733,#419734); +#419732 = CARTESIAN_POINT('',(148.5,-90.302943,-3.6E-02)); +#419733 = DIRECTION('',(-0.,-0.,-1.)); +#419734 = DIRECTION('',(-0.,-1.,0.)); +#419735 = MANIFOLD_SOLID_BREP('',#419736); +#419736 = CLOSED_SHELL('',(#419737,#419770,#419790,#419810)); +#419737 = ADVANCED_FACE('',(#419738),#419765,.T.); +#419738 = FACE_BOUND('',#419739,.F.); +#419739 = EDGE_LOOP('',(#419740,#419750,#419757,#419758)); +#419740 = ORIENTED_EDGE('',*,*,#419741,.T.); +#419741 = EDGE_CURVE('',#419742,#419744,#419746,.T.); +#419742 = VERTEX_POINT('',#419743); +#419743 = CARTESIAN_POINT('',(145.,-77.15,-3.5E-02)); +#419744 = VERTEX_POINT('',#419745); +#419745 = CARTESIAN_POINT('',(145.,-77.15,1.545)); +#419746 = LINE('',#419747,#419748); +#419747 = CARTESIAN_POINT('',(145.,-77.15,-3.5E-02)); +#419748 = VECTOR('',#419749,1.); +#419749 = DIRECTION('',(0.,0.,1.)); +#419750 = ORIENTED_EDGE('',*,*,#419751,.T.); +#419751 = EDGE_CURVE('',#419744,#419744,#419752,.T.); +#419752 = CIRCLE('',#419753,0.15); +#419753 = AXIS2_PLACEMENT_3D('',#419754,#419755,#419756); +#419754 = CARTESIAN_POINT('',(145.,-77.,1.545)); +#419755 = DIRECTION('',(0.,0.,1.)); +#419756 = DIRECTION('',(-0.,-1.,0.)); +#419757 = ORIENTED_EDGE('',*,*,#419741,.F.); +#419758 = ORIENTED_EDGE('',*,*,#419759,.F.); +#419759 = EDGE_CURVE('',#419742,#419742,#419760,.T.); +#419760 = CIRCLE('',#419761,0.15); +#419761 = AXIS2_PLACEMENT_3D('',#419762,#419763,#419764); +#419762 = CARTESIAN_POINT('',(145.,-77.,-3.5E-02)); +#419763 = DIRECTION('',(0.,0.,1.)); +#419764 = DIRECTION('',(-0.,-1.,0.)); +#419765 = CYLINDRICAL_SURFACE('',#419766,0.15); +#419766 = AXIS2_PLACEMENT_3D('',#419767,#419768,#419769); +#419767 = CARTESIAN_POINT('',(145.,-77.,-3.5E-02)); +#419768 = DIRECTION('',(-0.,-0.,-1.)); +#419769 = DIRECTION('',(-0.,-1.,0.)); +#419770 = ADVANCED_FACE('',(#419771,#419774),#419785,.F.); +#419771 = FACE_BOUND('',#419772,.F.); +#419772 = EDGE_LOOP('',(#419773)); +#419773 = ORIENTED_EDGE('',*,*,#419759,.T.); +#419774 = FACE_BOUND('',#419775,.F.); +#419775 = EDGE_LOOP('',(#419776)); +#419776 = ORIENTED_EDGE('',*,*,#419777,.T.); +#419777 = EDGE_CURVE('',#419778,#419778,#419780,.T.); +#419778 = VERTEX_POINT('',#419779); +#419779 = CARTESIAN_POINT('',(145.,-77.125,-3.5E-02)); +#419780 = CIRCLE('',#419781,0.125); +#419781 = AXIS2_PLACEMENT_3D('',#419782,#419783,#419784); +#419782 = CARTESIAN_POINT('',(145.,-77.,-3.5E-02)); +#419783 = DIRECTION('',(-0.,0.,-1.)); +#419784 = DIRECTION('',(-0.,-1.,0.)); +#419785 = PLANE('',#419786); +#419786 = AXIS2_PLACEMENT_3D('',#419787,#419788,#419789); +#419787 = CARTESIAN_POINT('',(145.,-77.15,-3.5E-02)); +#419788 = DIRECTION('',(0.,0.,1.)); +#419789 = DIRECTION('',(1.,0.,-0.)); +#419790 = ADVANCED_FACE('',(#419791,#419794),#419805,.T.); +#419791 = FACE_BOUND('',#419792,.T.); +#419792 = EDGE_LOOP('',(#419793)); +#419793 = ORIENTED_EDGE('',*,*,#419751,.T.); +#419794 = FACE_BOUND('',#419795,.T.); +#419795 = EDGE_LOOP('',(#419796)); +#419796 = ORIENTED_EDGE('',*,*,#419797,.T.); +#419797 = EDGE_CURVE('',#419798,#419798,#419800,.T.); +#419798 = VERTEX_POINT('',#419799); +#419799 = CARTESIAN_POINT('',(145.,-77.125,1.545)); +#419800 = CIRCLE('',#419801,0.125); +#419801 = AXIS2_PLACEMENT_3D('',#419802,#419803,#419804); +#419802 = CARTESIAN_POINT('',(145.,-77.,1.545)); +#419803 = DIRECTION('',(-0.,0.,-1.)); +#419804 = DIRECTION('',(-0.,-1.,0.)); +#419805 = PLANE('',#419806); +#419806 = AXIS2_PLACEMENT_3D('',#419807,#419808,#419809); +#419807 = CARTESIAN_POINT('',(145.,-77.15,1.545)); +#419808 = DIRECTION('',(0.,0.,1.)); +#419809 = DIRECTION('',(1.,0.,-0.)); +#419810 = ADVANCED_FACE('',(#419811),#419822,.F.); +#419811 = FACE_BOUND('',#419812,.T.); +#419812 = EDGE_LOOP('',(#419813,#419814,#419820,#419821)); +#419813 = ORIENTED_EDGE('',*,*,#419777,.T.); +#419814 = ORIENTED_EDGE('',*,*,#419815,.T.); +#419815 = EDGE_CURVE('',#419778,#419798,#419816,.T.); +#419816 = LINE('',#419817,#419818); +#419817 = CARTESIAN_POINT('',(145.,-77.125,-3.6E-02)); +#419818 = VECTOR('',#419819,1.); +#419819 = DIRECTION('',(0.,0.,1.)); +#419820 = ORIENTED_EDGE('',*,*,#419797,.F.); +#419821 = ORIENTED_EDGE('',*,*,#419815,.F.); +#419822 = CYLINDRICAL_SURFACE('',#419823,0.125); +#419823 = AXIS2_PLACEMENT_3D('',#419824,#419825,#419826); +#419824 = CARTESIAN_POINT('',(145.,-77.,-3.6E-02)); +#419825 = DIRECTION('',(-0.,-0.,-1.)); +#419826 = DIRECTION('',(-0.,-1.,0.)); +#419827 = MANIFOLD_SOLID_BREP('',#419828); +#419828 = CLOSED_SHELL('',(#419829,#419862,#419882,#419902)); +#419829 = ADVANCED_FACE('',(#419830),#419857,.T.); +#419830 = FACE_BOUND('',#419831,.F.); +#419831 = EDGE_LOOP('',(#419832,#419842,#419849,#419850)); +#419832 = ORIENTED_EDGE('',*,*,#419833,.T.); +#419833 = EDGE_CURVE('',#419834,#419836,#419838,.T.); +#419834 = VERTEX_POINT('',#419835); +#419835 = CARTESIAN_POINT('',(125.340812,-100.574593,-3.5E-02)); +#419836 = VERTEX_POINT('',#419837); +#419837 = CARTESIAN_POINT('',(125.340812,-100.574593,1.545)); +#419838 = LINE('',#419839,#419840); +#419839 = CARTESIAN_POINT('',(125.340812,-100.574593,-3.5E-02)); +#419840 = VECTOR('',#419841,1.); +#419841 = DIRECTION('',(0.,0.,1.)); +#419842 = ORIENTED_EDGE('',*,*,#419843,.T.); +#419843 = EDGE_CURVE('',#419836,#419836,#419844,.T.); +#419844 = CIRCLE('',#419845,0.15); +#419845 = AXIS2_PLACEMENT_3D('',#419846,#419847,#419848); +#419846 = CARTESIAN_POINT('',(125.340812,-100.424593,1.545)); +#419847 = DIRECTION('',(0.,0.,1.)); +#419848 = DIRECTION('',(-0.,-1.,0.)); +#419849 = ORIENTED_EDGE('',*,*,#419833,.F.); +#419850 = ORIENTED_EDGE('',*,*,#419851,.F.); +#419851 = EDGE_CURVE('',#419834,#419834,#419852,.T.); +#419852 = CIRCLE('',#419853,0.15); +#419853 = AXIS2_PLACEMENT_3D('',#419854,#419855,#419856); +#419854 = CARTESIAN_POINT('',(125.340812,-100.424593,-3.5E-02)); +#419855 = DIRECTION('',(0.,0.,1.)); +#419856 = DIRECTION('',(-0.,-1.,0.)); +#419857 = CYLINDRICAL_SURFACE('',#419858,0.15); +#419858 = AXIS2_PLACEMENT_3D('',#419859,#419860,#419861); +#419859 = CARTESIAN_POINT('',(125.340812,-100.424593,-3.5E-02)); +#419860 = DIRECTION('',(-0.,-0.,-1.)); +#419861 = DIRECTION('',(-0.,-1.,0.)); +#419862 = ADVANCED_FACE('',(#419863,#419866),#419877,.F.); +#419863 = FACE_BOUND('',#419864,.F.); +#419864 = EDGE_LOOP('',(#419865)); +#419865 = ORIENTED_EDGE('',*,*,#419851,.T.); +#419866 = FACE_BOUND('',#419867,.F.); +#419867 = EDGE_LOOP('',(#419868)); +#419868 = ORIENTED_EDGE('',*,*,#419869,.T.); +#419869 = EDGE_CURVE('',#419870,#419870,#419872,.T.); +#419870 = VERTEX_POINT('',#419871); +#419871 = CARTESIAN_POINT('',(125.340812,-100.549593,-3.5E-02)); +#419872 = CIRCLE('',#419873,0.125); +#419873 = AXIS2_PLACEMENT_3D('',#419874,#419875,#419876); +#419874 = CARTESIAN_POINT('',(125.340812,-100.424593,-3.5E-02)); +#419875 = DIRECTION('',(-0.,0.,-1.)); +#419876 = DIRECTION('',(-0.,-1.,0.)); +#419877 = PLANE('',#419878); +#419878 = AXIS2_PLACEMENT_3D('',#419879,#419880,#419881); +#419879 = CARTESIAN_POINT('',(125.340812,-100.574593,-3.5E-02)); +#419880 = DIRECTION('',(0.,0.,1.)); +#419881 = DIRECTION('',(1.,0.,-0.)); +#419882 = ADVANCED_FACE('',(#419883,#419886),#419897,.T.); +#419883 = FACE_BOUND('',#419884,.T.); +#419884 = EDGE_LOOP('',(#419885)); +#419885 = ORIENTED_EDGE('',*,*,#419843,.T.); +#419886 = FACE_BOUND('',#419887,.T.); +#419887 = EDGE_LOOP('',(#419888)); +#419888 = ORIENTED_EDGE('',*,*,#419889,.T.); +#419889 = EDGE_CURVE('',#419890,#419890,#419892,.T.); +#419890 = VERTEX_POINT('',#419891); +#419891 = CARTESIAN_POINT('',(125.340812,-100.549593,1.545)); +#419892 = CIRCLE('',#419893,0.125); +#419893 = AXIS2_PLACEMENT_3D('',#419894,#419895,#419896); +#419894 = CARTESIAN_POINT('',(125.340812,-100.424593,1.545)); +#419895 = DIRECTION('',(-0.,0.,-1.)); +#419896 = DIRECTION('',(-0.,-1.,0.)); +#419897 = PLANE('',#419898); +#419898 = AXIS2_PLACEMENT_3D('',#419899,#419900,#419901); +#419899 = CARTESIAN_POINT('',(125.340812,-100.574593,1.545)); +#419900 = DIRECTION('',(0.,0.,1.)); +#419901 = DIRECTION('',(1.,0.,-0.)); +#419902 = ADVANCED_FACE('',(#419903),#419914,.F.); +#419903 = FACE_BOUND('',#419904,.T.); +#419904 = EDGE_LOOP('',(#419905,#419906,#419912,#419913)); +#419905 = ORIENTED_EDGE('',*,*,#419869,.T.); +#419906 = ORIENTED_EDGE('',*,*,#419907,.T.); +#419907 = EDGE_CURVE('',#419870,#419890,#419908,.T.); +#419908 = LINE('',#419909,#419910); +#419909 = CARTESIAN_POINT('',(125.340812,-100.549593,-3.6E-02)); +#419910 = VECTOR('',#419911,1.); +#419911 = DIRECTION('',(0.,0.,1.)); +#419912 = ORIENTED_EDGE('',*,*,#419889,.F.); +#419913 = ORIENTED_EDGE('',*,*,#419907,.F.); +#419914 = CYLINDRICAL_SURFACE('',#419915,0.125); +#419915 = AXIS2_PLACEMENT_3D('',#419916,#419917,#419918); +#419916 = CARTESIAN_POINT('',(125.340812,-100.424593,-3.6E-02)); +#419917 = DIRECTION('',(-0.,-0.,-1.)); +#419918 = DIRECTION('',(-0.,-1.,0.)); +#419919 = MANIFOLD_SOLID_BREP('',#419920); +#419920 = CLOSED_SHELL('',(#419921,#419954,#419974,#419994)); +#419921 = ADVANCED_FACE('',(#419922),#419949,.T.); +#419922 = FACE_BOUND('',#419923,.F.); +#419923 = EDGE_LOOP('',(#419924,#419934,#419941,#419942)); +#419924 = ORIENTED_EDGE('',*,*,#419925,.T.); +#419925 = EDGE_CURVE('',#419926,#419928,#419930,.T.); +#419926 = VERTEX_POINT('',#419927); +#419927 = CARTESIAN_POINT('',(128.,-76.65,-3.5E-02)); +#419928 = VERTEX_POINT('',#419929); +#419929 = CARTESIAN_POINT('',(128.,-76.65,1.545)); +#419930 = LINE('',#419931,#419932); +#419931 = CARTESIAN_POINT('',(128.,-76.65,-3.5E-02)); +#419932 = VECTOR('',#419933,1.); +#419933 = DIRECTION('',(0.,0.,1.)); +#419934 = ORIENTED_EDGE('',*,*,#419935,.T.); +#419935 = EDGE_CURVE('',#419928,#419928,#419936,.T.); +#419936 = CIRCLE('',#419937,0.15); +#419937 = AXIS2_PLACEMENT_3D('',#419938,#419939,#419940); +#419938 = CARTESIAN_POINT('',(128.,-76.5,1.545)); +#419939 = DIRECTION('',(0.,0.,1.)); +#419940 = DIRECTION('',(-0.,-1.,0.)); +#419941 = ORIENTED_EDGE('',*,*,#419925,.F.); +#419942 = ORIENTED_EDGE('',*,*,#419943,.F.); +#419943 = EDGE_CURVE('',#419926,#419926,#419944,.T.); +#419944 = CIRCLE('',#419945,0.15); +#419945 = AXIS2_PLACEMENT_3D('',#419946,#419947,#419948); +#419946 = CARTESIAN_POINT('',(128.,-76.5,-3.5E-02)); +#419947 = DIRECTION('',(0.,0.,1.)); +#419948 = DIRECTION('',(-0.,-1.,0.)); +#419949 = CYLINDRICAL_SURFACE('',#419950,0.15); +#419950 = AXIS2_PLACEMENT_3D('',#419951,#419952,#419953); +#419951 = CARTESIAN_POINT('',(128.,-76.5,-3.5E-02)); +#419952 = DIRECTION('',(-0.,-0.,-1.)); +#419953 = DIRECTION('',(-0.,-1.,0.)); +#419954 = ADVANCED_FACE('',(#419955,#419958),#419969,.F.); +#419955 = FACE_BOUND('',#419956,.F.); +#419956 = EDGE_LOOP('',(#419957)); +#419957 = ORIENTED_EDGE('',*,*,#419943,.T.); +#419958 = FACE_BOUND('',#419959,.F.); +#419959 = EDGE_LOOP('',(#419960)); +#419960 = ORIENTED_EDGE('',*,*,#419961,.T.); +#419961 = EDGE_CURVE('',#419962,#419962,#419964,.T.); +#419962 = VERTEX_POINT('',#419963); +#419963 = CARTESIAN_POINT('',(128.,-76.625,-3.5E-02)); +#419964 = CIRCLE('',#419965,0.125); +#419965 = AXIS2_PLACEMENT_3D('',#419966,#419967,#419968); +#419966 = CARTESIAN_POINT('',(128.,-76.5,-3.5E-02)); +#419967 = DIRECTION('',(-0.,0.,-1.)); +#419968 = DIRECTION('',(-0.,-1.,0.)); +#419969 = PLANE('',#419970); +#419970 = AXIS2_PLACEMENT_3D('',#419971,#419972,#419973); +#419971 = CARTESIAN_POINT('',(128.,-76.65,-3.5E-02)); +#419972 = DIRECTION('',(0.,0.,1.)); +#419973 = DIRECTION('',(1.,0.,-0.)); +#419974 = ADVANCED_FACE('',(#419975,#419978),#419989,.T.); +#419975 = FACE_BOUND('',#419976,.T.); +#419976 = EDGE_LOOP('',(#419977)); +#419977 = ORIENTED_EDGE('',*,*,#419935,.T.); +#419978 = FACE_BOUND('',#419979,.T.); +#419979 = EDGE_LOOP('',(#419980)); +#419980 = ORIENTED_EDGE('',*,*,#419981,.T.); +#419981 = EDGE_CURVE('',#419982,#419982,#419984,.T.); +#419982 = VERTEX_POINT('',#419983); +#419983 = CARTESIAN_POINT('',(128.,-76.625,1.545)); +#419984 = CIRCLE('',#419985,0.125); +#419985 = AXIS2_PLACEMENT_3D('',#419986,#419987,#419988); +#419986 = CARTESIAN_POINT('',(128.,-76.5,1.545)); +#419987 = DIRECTION('',(-0.,0.,-1.)); +#419988 = DIRECTION('',(-0.,-1.,0.)); +#419989 = PLANE('',#419990); +#419990 = AXIS2_PLACEMENT_3D('',#419991,#419992,#419993); +#419991 = CARTESIAN_POINT('',(128.,-76.65,1.545)); +#419992 = DIRECTION('',(0.,0.,1.)); +#419993 = DIRECTION('',(1.,0.,-0.)); +#419994 = ADVANCED_FACE('',(#419995),#420006,.F.); +#419995 = FACE_BOUND('',#419996,.T.); +#419996 = EDGE_LOOP('',(#419997,#419998,#420004,#420005)); +#419997 = ORIENTED_EDGE('',*,*,#419961,.T.); +#419998 = ORIENTED_EDGE('',*,*,#419999,.T.); +#419999 = EDGE_CURVE('',#419962,#419982,#420000,.T.); +#420000 = LINE('',#420001,#420002); +#420001 = CARTESIAN_POINT('',(128.,-76.625,-3.6E-02)); +#420002 = VECTOR('',#420003,1.); +#420003 = DIRECTION('',(0.,0.,1.)); +#420004 = ORIENTED_EDGE('',*,*,#419981,.F.); +#420005 = ORIENTED_EDGE('',*,*,#419999,.F.); +#420006 = CYLINDRICAL_SURFACE('',#420007,0.125); +#420007 = AXIS2_PLACEMENT_3D('',#420008,#420009,#420010); +#420008 = CARTESIAN_POINT('',(128.,-76.5,-3.6E-02)); +#420009 = DIRECTION('',(-0.,-0.,-1.)); +#420010 = DIRECTION('',(-0.,-1.,0.)); +#420011 = MANIFOLD_SOLID_BREP('',#420012); +#420012 = CLOSED_SHELL('',(#420013,#420046,#420066,#420086)); +#420013 = ADVANCED_FACE('',(#420014),#420041,.T.); +#420014 = FACE_BOUND('',#420015,.F.); +#420015 = EDGE_LOOP('',(#420016,#420026,#420033,#420034)); +#420016 = ORIENTED_EDGE('',*,*,#420017,.T.); +#420017 = EDGE_CURVE('',#420018,#420020,#420022,.T.); +#420018 = VERTEX_POINT('',#420019); +#420019 = CARTESIAN_POINT('',(125.9,-90.65,-3.5E-02)); +#420020 = VERTEX_POINT('',#420021); +#420021 = CARTESIAN_POINT('',(125.9,-90.65,1.545)); +#420022 = LINE('',#420023,#420024); +#420023 = CARTESIAN_POINT('',(125.9,-90.65,-3.5E-02)); +#420024 = VECTOR('',#420025,1.); +#420025 = DIRECTION('',(0.,0.,1.)); +#420026 = ORIENTED_EDGE('',*,*,#420027,.T.); +#420027 = EDGE_CURVE('',#420020,#420020,#420028,.T.); +#420028 = CIRCLE('',#420029,0.15); +#420029 = AXIS2_PLACEMENT_3D('',#420030,#420031,#420032); +#420030 = CARTESIAN_POINT('',(125.9,-90.5,1.545)); +#420031 = DIRECTION('',(0.,0.,1.)); +#420032 = DIRECTION('',(-0.,-1.,0.)); +#420033 = ORIENTED_EDGE('',*,*,#420017,.F.); +#420034 = ORIENTED_EDGE('',*,*,#420035,.F.); +#420035 = EDGE_CURVE('',#420018,#420018,#420036,.T.); +#420036 = CIRCLE('',#420037,0.15); +#420037 = AXIS2_PLACEMENT_3D('',#420038,#420039,#420040); +#420038 = CARTESIAN_POINT('',(125.9,-90.5,-3.5E-02)); +#420039 = DIRECTION('',(0.,0.,1.)); +#420040 = DIRECTION('',(-0.,-1.,0.)); +#420041 = CYLINDRICAL_SURFACE('',#420042,0.15); +#420042 = AXIS2_PLACEMENT_3D('',#420043,#420044,#420045); +#420043 = CARTESIAN_POINT('',(125.9,-90.5,-3.5E-02)); +#420044 = DIRECTION('',(-0.,-0.,-1.)); +#420045 = DIRECTION('',(-0.,-1.,0.)); +#420046 = ADVANCED_FACE('',(#420047,#420050),#420061,.F.); +#420047 = FACE_BOUND('',#420048,.F.); +#420048 = EDGE_LOOP('',(#420049)); +#420049 = ORIENTED_EDGE('',*,*,#420035,.T.); +#420050 = FACE_BOUND('',#420051,.F.); +#420051 = EDGE_LOOP('',(#420052)); +#420052 = ORIENTED_EDGE('',*,*,#420053,.T.); +#420053 = EDGE_CURVE('',#420054,#420054,#420056,.T.); +#420054 = VERTEX_POINT('',#420055); +#420055 = CARTESIAN_POINT('',(125.9,-90.625,-3.5E-02)); +#420056 = CIRCLE('',#420057,0.125); +#420057 = AXIS2_PLACEMENT_3D('',#420058,#420059,#420060); +#420058 = CARTESIAN_POINT('',(125.9,-90.5,-3.5E-02)); +#420059 = DIRECTION('',(-0.,0.,-1.)); +#420060 = DIRECTION('',(-0.,-1.,0.)); +#420061 = PLANE('',#420062); +#420062 = AXIS2_PLACEMENT_3D('',#420063,#420064,#420065); +#420063 = CARTESIAN_POINT('',(125.9,-90.65,-3.5E-02)); +#420064 = DIRECTION('',(0.,0.,1.)); +#420065 = DIRECTION('',(1.,0.,-0.)); +#420066 = ADVANCED_FACE('',(#420067,#420070),#420081,.T.); +#420067 = FACE_BOUND('',#420068,.T.); +#420068 = EDGE_LOOP('',(#420069)); +#420069 = ORIENTED_EDGE('',*,*,#420027,.T.); +#420070 = FACE_BOUND('',#420071,.T.); +#420071 = EDGE_LOOP('',(#420072)); +#420072 = ORIENTED_EDGE('',*,*,#420073,.T.); +#420073 = EDGE_CURVE('',#420074,#420074,#420076,.T.); +#420074 = VERTEX_POINT('',#420075); +#420075 = CARTESIAN_POINT('',(125.9,-90.625,1.545)); +#420076 = CIRCLE('',#420077,0.125); +#420077 = AXIS2_PLACEMENT_3D('',#420078,#420079,#420080); +#420078 = CARTESIAN_POINT('',(125.9,-90.5,1.545)); +#420079 = DIRECTION('',(-0.,0.,-1.)); +#420080 = DIRECTION('',(-0.,-1.,0.)); +#420081 = PLANE('',#420082); +#420082 = AXIS2_PLACEMENT_3D('',#420083,#420084,#420085); +#420083 = CARTESIAN_POINT('',(125.9,-90.65,1.545)); +#420084 = DIRECTION('',(0.,0.,1.)); +#420085 = DIRECTION('',(1.,0.,-0.)); +#420086 = ADVANCED_FACE('',(#420087),#420098,.F.); +#420087 = FACE_BOUND('',#420088,.T.); +#420088 = EDGE_LOOP('',(#420089,#420090,#420096,#420097)); +#420089 = ORIENTED_EDGE('',*,*,#420053,.T.); +#420090 = ORIENTED_EDGE('',*,*,#420091,.T.); +#420091 = EDGE_CURVE('',#420054,#420074,#420092,.T.); +#420092 = LINE('',#420093,#420094); +#420093 = CARTESIAN_POINT('',(125.9,-90.625,-3.6E-02)); +#420094 = VECTOR('',#420095,1.); +#420095 = DIRECTION('',(0.,0.,1.)); +#420096 = ORIENTED_EDGE('',*,*,#420073,.F.); +#420097 = ORIENTED_EDGE('',*,*,#420091,.F.); +#420098 = CYLINDRICAL_SURFACE('',#420099,0.125); +#420099 = AXIS2_PLACEMENT_3D('',#420100,#420101,#420102); +#420100 = CARTESIAN_POINT('',(125.9,-90.5,-3.6E-02)); +#420101 = DIRECTION('',(-0.,-0.,-1.)); +#420102 = DIRECTION('',(-0.,-1.,0.)); +#420103 = MANIFOLD_SOLID_BREP('',#420104); +#420104 = CLOSED_SHELL('',(#420105,#420138,#420158,#420178)); +#420105 = ADVANCED_FACE('',(#420106),#420133,.T.); +#420106 = FACE_BOUND('',#420107,.F.); +#420107 = EDGE_LOOP('',(#420108,#420118,#420125,#420126)); +#420108 = ORIENTED_EDGE('',*,*,#420109,.T.); +#420109 = EDGE_CURVE('',#420110,#420112,#420114,.T.); +#420110 = VERTEX_POINT('',#420111); +#420111 = CARTESIAN_POINT('',(128.,-75.65,-3.5E-02)); +#420112 = VERTEX_POINT('',#420113); +#420113 = CARTESIAN_POINT('',(128.,-75.65,1.545)); +#420114 = LINE('',#420115,#420116); +#420115 = CARTESIAN_POINT('',(128.,-75.65,-3.5E-02)); +#420116 = VECTOR('',#420117,1.); +#420117 = DIRECTION('',(0.,0.,1.)); +#420118 = ORIENTED_EDGE('',*,*,#420119,.T.); +#420119 = EDGE_CURVE('',#420112,#420112,#420120,.T.); +#420120 = CIRCLE('',#420121,0.15); +#420121 = AXIS2_PLACEMENT_3D('',#420122,#420123,#420124); +#420122 = CARTESIAN_POINT('',(128.,-75.5,1.545)); +#420123 = DIRECTION('',(0.,0.,1.)); +#420124 = DIRECTION('',(-0.,-1.,0.)); +#420125 = ORIENTED_EDGE('',*,*,#420109,.F.); +#420126 = ORIENTED_EDGE('',*,*,#420127,.F.); +#420127 = EDGE_CURVE('',#420110,#420110,#420128,.T.); +#420128 = CIRCLE('',#420129,0.15); +#420129 = AXIS2_PLACEMENT_3D('',#420130,#420131,#420132); +#420130 = CARTESIAN_POINT('',(128.,-75.5,-3.5E-02)); +#420131 = DIRECTION('',(0.,0.,1.)); +#420132 = DIRECTION('',(-0.,-1.,0.)); +#420133 = CYLINDRICAL_SURFACE('',#420134,0.15); +#420134 = AXIS2_PLACEMENT_3D('',#420135,#420136,#420137); +#420135 = CARTESIAN_POINT('',(128.,-75.5,-3.5E-02)); +#420136 = DIRECTION('',(-0.,-0.,-1.)); +#420137 = DIRECTION('',(-0.,-1.,0.)); +#420138 = ADVANCED_FACE('',(#420139,#420142),#420153,.F.); +#420139 = FACE_BOUND('',#420140,.F.); +#420140 = EDGE_LOOP('',(#420141)); +#420141 = ORIENTED_EDGE('',*,*,#420127,.T.); +#420142 = FACE_BOUND('',#420143,.F.); +#420143 = EDGE_LOOP('',(#420144)); +#420144 = ORIENTED_EDGE('',*,*,#420145,.T.); +#420145 = EDGE_CURVE('',#420146,#420146,#420148,.T.); +#420146 = VERTEX_POINT('',#420147); +#420147 = CARTESIAN_POINT('',(128.,-75.625,-3.5E-02)); +#420148 = CIRCLE('',#420149,0.125); +#420149 = AXIS2_PLACEMENT_3D('',#420150,#420151,#420152); +#420150 = CARTESIAN_POINT('',(128.,-75.5,-3.5E-02)); +#420151 = DIRECTION('',(-0.,0.,-1.)); +#420152 = DIRECTION('',(-0.,-1.,0.)); +#420153 = PLANE('',#420154); +#420154 = AXIS2_PLACEMENT_3D('',#420155,#420156,#420157); +#420155 = CARTESIAN_POINT('',(128.,-75.65,-3.5E-02)); +#420156 = DIRECTION('',(0.,0.,1.)); +#420157 = DIRECTION('',(1.,0.,-0.)); +#420158 = ADVANCED_FACE('',(#420159,#420162),#420173,.T.); +#420159 = FACE_BOUND('',#420160,.T.); +#420160 = EDGE_LOOP('',(#420161)); +#420161 = ORIENTED_EDGE('',*,*,#420119,.T.); +#420162 = FACE_BOUND('',#420163,.T.); +#420163 = EDGE_LOOP('',(#420164)); +#420164 = ORIENTED_EDGE('',*,*,#420165,.T.); +#420165 = EDGE_CURVE('',#420166,#420166,#420168,.T.); +#420166 = VERTEX_POINT('',#420167); +#420167 = CARTESIAN_POINT('',(128.,-75.625,1.545)); +#420168 = CIRCLE('',#420169,0.125); +#420169 = AXIS2_PLACEMENT_3D('',#420170,#420171,#420172); +#420170 = CARTESIAN_POINT('',(128.,-75.5,1.545)); +#420171 = DIRECTION('',(-0.,0.,-1.)); +#420172 = DIRECTION('',(-0.,-1.,0.)); +#420173 = PLANE('',#420174); +#420174 = AXIS2_PLACEMENT_3D('',#420175,#420176,#420177); +#420175 = CARTESIAN_POINT('',(128.,-75.65,1.545)); +#420176 = DIRECTION('',(0.,0.,1.)); +#420177 = DIRECTION('',(1.,0.,-0.)); +#420178 = ADVANCED_FACE('',(#420179),#420190,.F.); +#420179 = FACE_BOUND('',#420180,.T.); +#420180 = EDGE_LOOP('',(#420181,#420182,#420188,#420189)); +#420181 = ORIENTED_EDGE('',*,*,#420145,.T.); +#420182 = ORIENTED_EDGE('',*,*,#420183,.T.); +#420183 = EDGE_CURVE('',#420146,#420166,#420184,.T.); +#420184 = LINE('',#420185,#420186); +#420185 = CARTESIAN_POINT('',(128.,-75.625,-3.6E-02)); +#420186 = VECTOR('',#420187,1.); +#420187 = DIRECTION('',(0.,0.,1.)); +#420188 = ORIENTED_EDGE('',*,*,#420165,.F.); +#420189 = ORIENTED_EDGE('',*,*,#420183,.F.); +#420190 = CYLINDRICAL_SURFACE('',#420191,0.125); +#420191 = AXIS2_PLACEMENT_3D('',#420192,#420193,#420194); +#420192 = CARTESIAN_POINT('',(128.,-75.5,-3.6E-02)); +#420193 = DIRECTION('',(-0.,-0.,-1.)); +#420194 = DIRECTION('',(-0.,-1.,0.)); +#420195 = MANIFOLD_SOLID_BREP('',#420196); +#420196 = CLOSED_SHELL('',(#420197,#420230,#420250,#420270)); +#420197 = ADVANCED_FACE('',(#420198),#420225,.T.); +#420198 = FACE_BOUND('',#420199,.F.); +#420199 = EDGE_LOOP('',(#420200,#420210,#420217,#420218)); +#420200 = ORIENTED_EDGE('',*,*,#420201,.T.); +#420201 = EDGE_CURVE('',#420202,#420204,#420206,.T.); +#420202 = VERTEX_POINT('',#420203); +#420203 = CARTESIAN_POINT('',(126.7,-77.05,-3.5E-02)); +#420204 = VERTEX_POINT('',#420205); +#420205 = CARTESIAN_POINT('',(126.7,-77.05,1.545)); +#420206 = LINE('',#420207,#420208); +#420207 = CARTESIAN_POINT('',(126.7,-77.05,-3.5E-02)); +#420208 = VECTOR('',#420209,1.); +#420209 = DIRECTION('',(0.,0.,1.)); +#420210 = ORIENTED_EDGE('',*,*,#420211,.T.); +#420211 = EDGE_CURVE('',#420204,#420204,#420212,.T.); +#420212 = CIRCLE('',#420213,0.15); +#420213 = AXIS2_PLACEMENT_3D('',#420214,#420215,#420216); +#420214 = CARTESIAN_POINT('',(126.7,-76.9,1.545)); +#420215 = DIRECTION('',(0.,-0.,1.)); +#420216 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420217 = ORIENTED_EDGE('',*,*,#420201,.F.); +#420218 = ORIENTED_EDGE('',*,*,#420219,.F.); +#420219 = EDGE_CURVE('',#420202,#420202,#420220,.T.); +#420220 = CIRCLE('',#420221,0.15); +#420221 = AXIS2_PLACEMENT_3D('',#420222,#420223,#420224); +#420222 = CARTESIAN_POINT('',(126.7,-76.9,-3.5E-02)); +#420223 = DIRECTION('',(0.,-0.,1.)); +#420224 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420225 = CYLINDRICAL_SURFACE('',#420226,0.15); +#420226 = AXIS2_PLACEMENT_3D('',#420227,#420228,#420229); +#420227 = CARTESIAN_POINT('',(126.7,-76.9,-3.5E-02)); +#420228 = DIRECTION('',(-0.,0.,-1.)); +#420229 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420230 = ADVANCED_FACE('',(#420231,#420234),#420245,.F.); +#420231 = FACE_BOUND('',#420232,.F.); +#420232 = EDGE_LOOP('',(#420233)); +#420233 = ORIENTED_EDGE('',*,*,#420219,.T.); +#420234 = FACE_BOUND('',#420235,.F.); +#420235 = EDGE_LOOP('',(#420236)); +#420236 = ORIENTED_EDGE('',*,*,#420237,.T.); +#420237 = EDGE_CURVE('',#420238,#420238,#420240,.T.); +#420238 = VERTEX_POINT('',#420239); +#420239 = CARTESIAN_POINT('',(126.7,-77.025,-3.5E-02)); +#420240 = CIRCLE('',#420241,0.125); +#420241 = AXIS2_PLACEMENT_3D('',#420242,#420243,#420244); +#420242 = CARTESIAN_POINT('',(126.7,-76.9,-3.5E-02)); +#420243 = DIRECTION('',(-0.,0.,-1.)); +#420244 = DIRECTION('',(-0.,-1.,0.)); +#420245 = PLANE('',#420246); +#420246 = AXIS2_PLACEMENT_3D('',#420247,#420248,#420249); +#420247 = CARTESIAN_POINT('',(126.7,-77.05,-3.5E-02)); +#420248 = DIRECTION('',(0.,0.,1.)); +#420249 = DIRECTION('',(1.,0.,-0.)); +#420250 = ADVANCED_FACE('',(#420251,#420254),#420265,.T.); +#420251 = FACE_BOUND('',#420252,.T.); +#420252 = EDGE_LOOP('',(#420253)); +#420253 = ORIENTED_EDGE('',*,*,#420211,.T.); +#420254 = FACE_BOUND('',#420255,.T.); +#420255 = EDGE_LOOP('',(#420256)); +#420256 = ORIENTED_EDGE('',*,*,#420257,.T.); +#420257 = EDGE_CURVE('',#420258,#420258,#420260,.T.); +#420258 = VERTEX_POINT('',#420259); +#420259 = CARTESIAN_POINT('',(126.7,-77.025,1.545)); +#420260 = CIRCLE('',#420261,0.125); +#420261 = AXIS2_PLACEMENT_3D('',#420262,#420263,#420264); +#420262 = CARTESIAN_POINT('',(126.7,-76.9,1.545)); +#420263 = DIRECTION('',(-0.,0.,-1.)); +#420264 = DIRECTION('',(-0.,-1.,0.)); +#420265 = PLANE('',#420266); +#420266 = AXIS2_PLACEMENT_3D('',#420267,#420268,#420269); +#420267 = CARTESIAN_POINT('',(126.7,-77.05,1.545)); +#420268 = DIRECTION('',(0.,0.,1.)); +#420269 = DIRECTION('',(1.,0.,-0.)); +#420270 = ADVANCED_FACE('',(#420271),#420282,.F.); +#420271 = FACE_BOUND('',#420272,.T.); +#420272 = EDGE_LOOP('',(#420273,#420274,#420280,#420281)); +#420273 = ORIENTED_EDGE('',*,*,#420237,.T.); +#420274 = ORIENTED_EDGE('',*,*,#420275,.T.); +#420275 = EDGE_CURVE('',#420238,#420258,#420276,.T.); +#420276 = LINE('',#420277,#420278); +#420277 = CARTESIAN_POINT('',(126.7,-77.025,-3.6E-02)); +#420278 = VECTOR('',#420279,1.); +#420279 = DIRECTION('',(0.,0.,1.)); +#420280 = ORIENTED_EDGE('',*,*,#420257,.F.); +#420281 = ORIENTED_EDGE('',*,*,#420275,.F.); +#420282 = CYLINDRICAL_SURFACE('',#420283,0.125); +#420283 = AXIS2_PLACEMENT_3D('',#420284,#420285,#420286); +#420284 = CARTESIAN_POINT('',(126.7,-76.9,-3.6E-02)); +#420285 = DIRECTION('',(-0.,-0.,-1.)); +#420286 = DIRECTION('',(-0.,-1.,0.)); +#420287 = MANIFOLD_SOLID_BREP('',#420288); +#420288 = CLOSED_SHELL('',(#420289,#420322,#420342,#420362)); +#420289 = ADVANCED_FACE('',(#420290),#420317,.T.); +#420290 = FACE_BOUND('',#420291,.F.); +#420291 = EDGE_LOOP('',(#420292,#420302,#420309,#420310)); +#420292 = ORIENTED_EDGE('',*,*,#420293,.T.); +#420293 = EDGE_CURVE('',#420294,#420296,#420298,.T.); +#420294 = VERTEX_POINT('',#420295); +#420295 = CARTESIAN_POINT('',(121.7,-64.25,-3.5E-02)); +#420296 = VERTEX_POINT('',#420297); +#420297 = CARTESIAN_POINT('',(121.7,-64.25,1.545)); +#420298 = LINE('',#420299,#420300); +#420299 = CARTESIAN_POINT('',(121.7,-64.25,-3.5E-02)); +#420300 = VECTOR('',#420301,1.); +#420301 = DIRECTION('',(0.,0.,1.)); +#420302 = ORIENTED_EDGE('',*,*,#420303,.T.); +#420303 = EDGE_CURVE('',#420296,#420296,#420304,.T.); +#420304 = CIRCLE('',#420305,0.15); +#420305 = AXIS2_PLACEMENT_3D('',#420306,#420307,#420308); +#420306 = CARTESIAN_POINT('',(121.7,-64.1,1.545)); +#420307 = DIRECTION('',(0.,-0.,1.)); +#420308 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420309 = ORIENTED_EDGE('',*,*,#420293,.F.); +#420310 = ORIENTED_EDGE('',*,*,#420311,.F.); +#420311 = EDGE_CURVE('',#420294,#420294,#420312,.T.); +#420312 = CIRCLE('',#420313,0.15); +#420313 = AXIS2_PLACEMENT_3D('',#420314,#420315,#420316); +#420314 = CARTESIAN_POINT('',(121.7,-64.1,-3.5E-02)); +#420315 = DIRECTION('',(0.,-0.,1.)); +#420316 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420317 = CYLINDRICAL_SURFACE('',#420318,0.15); +#420318 = AXIS2_PLACEMENT_3D('',#420319,#420320,#420321); +#420319 = CARTESIAN_POINT('',(121.7,-64.1,-3.5E-02)); +#420320 = DIRECTION('',(-0.,0.,-1.)); +#420321 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#420322 = ADVANCED_FACE('',(#420323,#420326),#420337,.F.); +#420323 = FACE_BOUND('',#420324,.F.); +#420324 = EDGE_LOOP('',(#420325)); +#420325 = ORIENTED_EDGE('',*,*,#420311,.T.); +#420326 = FACE_BOUND('',#420327,.F.); +#420327 = EDGE_LOOP('',(#420328)); +#420328 = ORIENTED_EDGE('',*,*,#420329,.T.); +#420329 = EDGE_CURVE('',#420330,#420330,#420332,.T.); +#420330 = VERTEX_POINT('',#420331); +#420331 = CARTESIAN_POINT('',(121.7,-64.225,-3.5E-02)); +#420332 = CIRCLE('',#420333,0.125); +#420333 = AXIS2_PLACEMENT_3D('',#420334,#420335,#420336); +#420334 = CARTESIAN_POINT('',(121.7,-64.1,-3.5E-02)); +#420335 = DIRECTION('',(-0.,0.,-1.)); +#420336 = DIRECTION('',(-0.,-1.,0.)); +#420337 = PLANE('',#420338); +#420338 = AXIS2_PLACEMENT_3D('',#420339,#420340,#420341); +#420339 = CARTESIAN_POINT('',(121.7,-64.25,-3.5E-02)); +#420340 = DIRECTION('',(0.,0.,1.)); +#420341 = DIRECTION('',(1.,0.,-0.)); +#420342 = ADVANCED_FACE('',(#420343,#420346),#420357,.T.); +#420343 = FACE_BOUND('',#420344,.T.); +#420344 = EDGE_LOOP('',(#420345)); +#420345 = ORIENTED_EDGE('',*,*,#420303,.T.); +#420346 = FACE_BOUND('',#420347,.T.); +#420347 = EDGE_LOOP('',(#420348)); +#420348 = ORIENTED_EDGE('',*,*,#420349,.T.); +#420349 = EDGE_CURVE('',#420350,#420350,#420352,.T.); +#420350 = VERTEX_POINT('',#420351); +#420351 = CARTESIAN_POINT('',(121.7,-64.225,1.545)); +#420352 = CIRCLE('',#420353,0.125); +#420353 = AXIS2_PLACEMENT_3D('',#420354,#420355,#420356); +#420354 = CARTESIAN_POINT('',(121.7,-64.1,1.545)); +#420355 = DIRECTION('',(-0.,0.,-1.)); +#420356 = DIRECTION('',(-0.,-1.,0.)); +#420357 = PLANE('',#420358); +#420358 = AXIS2_PLACEMENT_3D('',#420359,#420360,#420361); +#420359 = CARTESIAN_POINT('',(121.7,-64.25,1.545)); +#420360 = DIRECTION('',(0.,0.,1.)); +#420361 = DIRECTION('',(1.,0.,-0.)); +#420362 = ADVANCED_FACE('',(#420363),#420374,.F.); +#420363 = FACE_BOUND('',#420364,.T.); +#420364 = EDGE_LOOP('',(#420365,#420366,#420372,#420373)); +#420365 = ORIENTED_EDGE('',*,*,#420329,.T.); +#420366 = ORIENTED_EDGE('',*,*,#420367,.T.); +#420367 = EDGE_CURVE('',#420330,#420350,#420368,.T.); +#420368 = LINE('',#420369,#420370); +#420369 = CARTESIAN_POINT('',(121.7,-64.225,-3.6E-02)); +#420370 = VECTOR('',#420371,1.); +#420371 = DIRECTION('',(0.,0.,1.)); +#420372 = ORIENTED_EDGE('',*,*,#420349,.F.); +#420373 = ORIENTED_EDGE('',*,*,#420367,.F.); +#420374 = CYLINDRICAL_SURFACE('',#420375,0.125); +#420375 = AXIS2_PLACEMENT_3D('',#420376,#420377,#420378); +#420376 = CARTESIAN_POINT('',(121.7,-64.1,-3.6E-02)); +#420377 = DIRECTION('',(-0.,-0.,-1.)); +#420378 = DIRECTION('',(-0.,-1.,0.)); +#420379 = MANIFOLD_SOLID_BREP('',#420380); +#420380 = CLOSED_SHELL('',(#420381,#420414,#420434,#420454)); +#420381 = ADVANCED_FACE('',(#420382),#420409,.T.); +#420382 = FACE_BOUND('',#420383,.F.); +#420383 = EDGE_LOOP('',(#420384,#420394,#420401,#420402)); +#420384 = ORIENTED_EDGE('',*,*,#420385,.T.); +#420385 = EDGE_CURVE('',#420386,#420388,#420390,.T.); +#420386 = VERTEX_POINT('',#420387); +#420387 = CARTESIAN_POINT('',(149.144265,-75.305735,-3.5E-02)); +#420388 = VERTEX_POINT('',#420389); +#420389 = CARTESIAN_POINT('',(149.144265,-75.305735,1.545)); +#420390 = LINE('',#420391,#420392); +#420391 = CARTESIAN_POINT('',(149.144265,-75.305735,-3.5E-02)); +#420392 = VECTOR('',#420393,1.); +#420393 = DIRECTION('',(0.,0.,1.)); +#420394 = ORIENTED_EDGE('',*,*,#420395,.T.); +#420395 = EDGE_CURVE('',#420388,#420388,#420396,.T.); +#420396 = CIRCLE('',#420397,0.15); +#420397 = AXIS2_PLACEMENT_3D('',#420398,#420399,#420400); +#420398 = CARTESIAN_POINT('',(149.144265,-75.155735,1.545)); +#420399 = DIRECTION('',(0.,0.,1.)); +#420400 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#420401 = ORIENTED_EDGE('',*,*,#420385,.F.); +#420402 = ORIENTED_EDGE('',*,*,#420403,.F.); +#420403 = EDGE_CURVE('',#420386,#420386,#420404,.T.); +#420404 = CIRCLE('',#420405,0.15); +#420405 = AXIS2_PLACEMENT_3D('',#420406,#420407,#420408); +#420406 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.5E-02)); +#420407 = DIRECTION('',(0.,0.,1.)); +#420408 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#420409 = CYLINDRICAL_SURFACE('',#420410,0.15); +#420410 = AXIS2_PLACEMENT_3D('',#420411,#420412,#420413); +#420411 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.5E-02)); +#420412 = DIRECTION('',(-0.,-0.,-1.)); +#420413 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#420414 = ADVANCED_FACE('',(#420415,#420418),#420429,.F.); +#420415 = FACE_BOUND('',#420416,.F.); +#420416 = EDGE_LOOP('',(#420417)); +#420417 = ORIENTED_EDGE('',*,*,#420403,.T.); +#420418 = FACE_BOUND('',#420419,.F.); +#420419 = EDGE_LOOP('',(#420420)); +#420420 = ORIENTED_EDGE('',*,*,#420421,.T.); +#420421 = EDGE_CURVE('',#420422,#420422,#420424,.T.); +#420422 = VERTEX_POINT('',#420423); +#420423 = CARTESIAN_POINT('',(149.144265,-75.280735,-3.5E-02)); +#420424 = CIRCLE('',#420425,0.125); +#420425 = AXIS2_PLACEMENT_3D('',#420426,#420427,#420428); +#420426 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.5E-02)); +#420427 = DIRECTION('',(-0.,0.,-1.)); +#420428 = DIRECTION('',(-0.,-1.,0.)); +#420429 = PLANE('',#420430); +#420430 = AXIS2_PLACEMENT_3D('',#420431,#420432,#420433); +#420431 = CARTESIAN_POINT('',(149.144265,-75.305735,-3.5E-02)); +#420432 = DIRECTION('',(0.,0.,1.)); +#420433 = DIRECTION('',(1.,0.,-0.)); +#420434 = ADVANCED_FACE('',(#420435,#420438),#420449,.T.); +#420435 = FACE_BOUND('',#420436,.T.); +#420436 = EDGE_LOOP('',(#420437)); +#420437 = ORIENTED_EDGE('',*,*,#420395,.T.); +#420438 = FACE_BOUND('',#420439,.T.); +#420439 = EDGE_LOOP('',(#420440)); +#420440 = ORIENTED_EDGE('',*,*,#420441,.T.); +#420441 = EDGE_CURVE('',#420442,#420442,#420444,.T.); +#420442 = VERTEX_POINT('',#420443); +#420443 = CARTESIAN_POINT('',(149.144265,-75.280735,1.545)); +#420444 = CIRCLE('',#420445,0.125); +#420445 = AXIS2_PLACEMENT_3D('',#420446,#420447,#420448); +#420446 = CARTESIAN_POINT('',(149.144265,-75.155735,1.545)); +#420447 = DIRECTION('',(-0.,0.,-1.)); +#420448 = DIRECTION('',(-0.,-1.,0.)); +#420449 = PLANE('',#420450); +#420450 = AXIS2_PLACEMENT_3D('',#420451,#420452,#420453); +#420451 = CARTESIAN_POINT('',(149.144265,-75.305735,1.545)); +#420452 = DIRECTION('',(0.,0.,1.)); +#420453 = DIRECTION('',(1.,0.,-0.)); +#420454 = ADVANCED_FACE('',(#420455),#420466,.F.); +#420455 = FACE_BOUND('',#420456,.T.); +#420456 = EDGE_LOOP('',(#420457,#420458,#420464,#420465)); +#420457 = ORIENTED_EDGE('',*,*,#420421,.T.); +#420458 = ORIENTED_EDGE('',*,*,#420459,.T.); +#420459 = EDGE_CURVE('',#420422,#420442,#420460,.T.); +#420460 = LINE('',#420461,#420462); +#420461 = CARTESIAN_POINT('',(149.144265,-75.280735,-3.6E-02)); +#420462 = VECTOR('',#420463,1.); +#420463 = DIRECTION('',(0.,0.,1.)); +#420464 = ORIENTED_EDGE('',*,*,#420441,.F.); +#420465 = ORIENTED_EDGE('',*,*,#420459,.F.); +#420466 = CYLINDRICAL_SURFACE('',#420467,0.125); +#420467 = AXIS2_PLACEMENT_3D('',#420468,#420469,#420470); +#420468 = CARTESIAN_POINT('',(149.144265,-75.155735,-3.6E-02)); +#420469 = DIRECTION('',(-0.,-0.,-1.)); +#420470 = DIRECTION('',(-0.,-1.,0.)); +#420471 = MANIFOLD_SOLID_BREP('',#420472); +#420472 = CLOSED_SHELL('',(#420473,#420506,#420526,#420546)); +#420473 = ADVANCED_FACE('',(#420474),#420501,.T.); +#420474 = FACE_BOUND('',#420475,.F.); +#420475 = EDGE_LOOP('',(#420476,#420486,#420493,#420494)); +#420476 = ORIENTED_EDGE('',*,*,#420477,.T.); +#420477 = EDGE_CURVE('',#420478,#420480,#420482,.T.); +#420478 = VERTEX_POINT('',#420479); +#420479 = CARTESIAN_POINT('',(149.5,-85.65,-3.5E-02)); +#420480 = VERTEX_POINT('',#420481); +#420481 = CARTESIAN_POINT('',(149.5,-85.65,1.545)); +#420482 = LINE('',#420483,#420484); +#420483 = CARTESIAN_POINT('',(149.5,-85.65,-3.5E-02)); +#420484 = VECTOR('',#420485,1.); +#420485 = DIRECTION('',(0.,0.,1.)); +#420486 = ORIENTED_EDGE('',*,*,#420487,.T.); +#420487 = EDGE_CURVE('',#420480,#420480,#420488,.T.); +#420488 = CIRCLE('',#420489,0.15); +#420489 = AXIS2_PLACEMENT_3D('',#420490,#420491,#420492); +#420490 = CARTESIAN_POINT('',(149.5,-85.5,1.545)); +#420491 = DIRECTION('',(0.,0.,1.)); +#420492 = DIRECTION('',(-0.,-1.,0.)); +#420493 = ORIENTED_EDGE('',*,*,#420477,.F.); +#420494 = ORIENTED_EDGE('',*,*,#420495,.F.); +#420495 = EDGE_CURVE('',#420478,#420478,#420496,.T.); +#420496 = CIRCLE('',#420497,0.15); +#420497 = AXIS2_PLACEMENT_3D('',#420498,#420499,#420500); +#420498 = CARTESIAN_POINT('',(149.5,-85.5,-3.5E-02)); +#420499 = DIRECTION('',(0.,0.,1.)); +#420500 = DIRECTION('',(-0.,-1.,0.)); +#420501 = CYLINDRICAL_SURFACE('',#420502,0.15); +#420502 = AXIS2_PLACEMENT_3D('',#420503,#420504,#420505); +#420503 = CARTESIAN_POINT('',(149.5,-85.5,-3.5E-02)); +#420504 = DIRECTION('',(-0.,-0.,-1.)); +#420505 = DIRECTION('',(-0.,-1.,0.)); +#420506 = ADVANCED_FACE('',(#420507,#420510),#420521,.F.); +#420507 = FACE_BOUND('',#420508,.F.); +#420508 = EDGE_LOOP('',(#420509)); +#420509 = ORIENTED_EDGE('',*,*,#420495,.T.); +#420510 = FACE_BOUND('',#420511,.F.); +#420511 = EDGE_LOOP('',(#420512)); +#420512 = ORIENTED_EDGE('',*,*,#420513,.T.); +#420513 = EDGE_CURVE('',#420514,#420514,#420516,.T.); +#420514 = VERTEX_POINT('',#420515); +#420515 = CARTESIAN_POINT('',(149.5,-85.625,-3.5E-02)); +#420516 = CIRCLE('',#420517,0.125); +#420517 = AXIS2_PLACEMENT_3D('',#420518,#420519,#420520); +#420518 = CARTESIAN_POINT('',(149.5,-85.5,-3.5E-02)); +#420519 = DIRECTION('',(-0.,0.,-1.)); +#420520 = DIRECTION('',(-0.,-1.,0.)); +#420521 = PLANE('',#420522); +#420522 = AXIS2_PLACEMENT_3D('',#420523,#420524,#420525); +#420523 = CARTESIAN_POINT('',(149.5,-85.65,-3.5E-02)); +#420524 = DIRECTION('',(0.,0.,1.)); +#420525 = DIRECTION('',(1.,0.,-0.)); +#420526 = ADVANCED_FACE('',(#420527,#420530),#420541,.T.); +#420527 = FACE_BOUND('',#420528,.T.); +#420528 = EDGE_LOOP('',(#420529)); +#420529 = ORIENTED_EDGE('',*,*,#420487,.T.); +#420530 = FACE_BOUND('',#420531,.T.); +#420531 = EDGE_LOOP('',(#420532)); +#420532 = ORIENTED_EDGE('',*,*,#420533,.T.); +#420533 = EDGE_CURVE('',#420534,#420534,#420536,.T.); +#420534 = VERTEX_POINT('',#420535); +#420535 = CARTESIAN_POINT('',(149.5,-85.625,1.545)); +#420536 = CIRCLE('',#420537,0.125); +#420537 = AXIS2_PLACEMENT_3D('',#420538,#420539,#420540); +#420538 = CARTESIAN_POINT('',(149.5,-85.5,1.545)); +#420539 = DIRECTION('',(-0.,0.,-1.)); +#420540 = DIRECTION('',(-0.,-1.,0.)); +#420541 = PLANE('',#420542); +#420542 = AXIS2_PLACEMENT_3D('',#420543,#420544,#420545); +#420543 = CARTESIAN_POINT('',(149.5,-85.65,1.545)); +#420544 = DIRECTION('',(0.,0.,1.)); +#420545 = DIRECTION('',(1.,0.,-0.)); +#420546 = ADVANCED_FACE('',(#420547),#420558,.F.); +#420547 = FACE_BOUND('',#420548,.T.); +#420548 = EDGE_LOOP('',(#420549,#420550,#420556,#420557)); +#420549 = ORIENTED_EDGE('',*,*,#420513,.T.); +#420550 = ORIENTED_EDGE('',*,*,#420551,.T.); +#420551 = EDGE_CURVE('',#420514,#420534,#420552,.T.); +#420552 = LINE('',#420553,#420554); +#420553 = CARTESIAN_POINT('',(149.5,-85.625,-3.6E-02)); +#420554 = VECTOR('',#420555,1.); +#420555 = DIRECTION('',(0.,0.,1.)); +#420556 = ORIENTED_EDGE('',*,*,#420533,.F.); +#420557 = ORIENTED_EDGE('',*,*,#420551,.F.); +#420558 = CYLINDRICAL_SURFACE('',#420559,0.125); +#420559 = AXIS2_PLACEMENT_3D('',#420560,#420561,#420562); +#420560 = CARTESIAN_POINT('',(149.5,-85.5,-3.6E-02)); +#420561 = DIRECTION('',(-0.,-0.,-1.)); +#420562 = DIRECTION('',(-0.,-1.,0.)); +#420563 = MANIFOLD_SOLID_BREP('',#420564); +#420564 = CLOSED_SHELL('',(#420565,#420598,#420618,#420638)); +#420565 = ADVANCED_FACE('',(#420566),#420593,.T.); +#420566 = FACE_BOUND('',#420567,.F.); +#420567 = EDGE_LOOP('',(#420568,#420578,#420585,#420586)); +#420568 = ORIENTED_EDGE('',*,*,#420569,.T.); +#420569 = EDGE_CURVE('',#420570,#420572,#420574,.T.); +#420570 = VERTEX_POINT('',#420571); +#420571 = CARTESIAN_POINT('',(150.5,-85.65,-3.5E-02)); +#420572 = VERTEX_POINT('',#420573); +#420573 = CARTESIAN_POINT('',(150.5,-85.65,1.545)); +#420574 = LINE('',#420575,#420576); +#420575 = CARTESIAN_POINT('',(150.5,-85.65,-3.5E-02)); +#420576 = VECTOR('',#420577,1.); +#420577 = DIRECTION('',(0.,0.,1.)); +#420578 = ORIENTED_EDGE('',*,*,#420579,.T.); +#420579 = EDGE_CURVE('',#420572,#420572,#420580,.T.); +#420580 = CIRCLE('',#420581,0.15); +#420581 = AXIS2_PLACEMENT_3D('',#420582,#420583,#420584); +#420582 = CARTESIAN_POINT('',(150.5,-85.5,1.545)); +#420583 = DIRECTION('',(0.,0.,1.)); +#420584 = DIRECTION('',(-0.,-1.,0.)); +#420585 = ORIENTED_EDGE('',*,*,#420569,.F.); +#420586 = ORIENTED_EDGE('',*,*,#420587,.F.); +#420587 = EDGE_CURVE('',#420570,#420570,#420588,.T.); +#420588 = CIRCLE('',#420589,0.15); +#420589 = AXIS2_PLACEMENT_3D('',#420590,#420591,#420592); +#420590 = CARTESIAN_POINT('',(150.5,-85.5,-3.5E-02)); +#420591 = DIRECTION('',(0.,0.,1.)); +#420592 = DIRECTION('',(-0.,-1.,0.)); +#420593 = CYLINDRICAL_SURFACE('',#420594,0.15); +#420594 = AXIS2_PLACEMENT_3D('',#420595,#420596,#420597); +#420595 = CARTESIAN_POINT('',(150.5,-85.5,-3.5E-02)); +#420596 = DIRECTION('',(-0.,-0.,-1.)); +#420597 = DIRECTION('',(-0.,-1.,0.)); +#420598 = ADVANCED_FACE('',(#420599,#420602),#420613,.F.); +#420599 = FACE_BOUND('',#420600,.F.); +#420600 = EDGE_LOOP('',(#420601)); +#420601 = ORIENTED_EDGE('',*,*,#420587,.T.); +#420602 = FACE_BOUND('',#420603,.F.); +#420603 = EDGE_LOOP('',(#420604)); +#420604 = ORIENTED_EDGE('',*,*,#420605,.T.); +#420605 = EDGE_CURVE('',#420606,#420606,#420608,.T.); +#420606 = VERTEX_POINT('',#420607); +#420607 = CARTESIAN_POINT('',(150.5,-85.625,-3.5E-02)); +#420608 = CIRCLE('',#420609,0.125); +#420609 = AXIS2_PLACEMENT_3D('',#420610,#420611,#420612); +#420610 = CARTESIAN_POINT('',(150.5,-85.5,-3.5E-02)); +#420611 = DIRECTION('',(-0.,0.,-1.)); +#420612 = DIRECTION('',(-0.,-1.,0.)); +#420613 = PLANE('',#420614); +#420614 = AXIS2_PLACEMENT_3D('',#420615,#420616,#420617); +#420615 = CARTESIAN_POINT('',(150.5,-85.65,-3.5E-02)); +#420616 = DIRECTION('',(0.,0.,1.)); +#420617 = DIRECTION('',(1.,0.,-0.)); +#420618 = ADVANCED_FACE('',(#420619,#420622),#420633,.T.); +#420619 = FACE_BOUND('',#420620,.T.); +#420620 = EDGE_LOOP('',(#420621)); +#420621 = ORIENTED_EDGE('',*,*,#420579,.T.); +#420622 = FACE_BOUND('',#420623,.T.); +#420623 = EDGE_LOOP('',(#420624)); +#420624 = ORIENTED_EDGE('',*,*,#420625,.T.); +#420625 = EDGE_CURVE('',#420626,#420626,#420628,.T.); +#420626 = VERTEX_POINT('',#420627); +#420627 = CARTESIAN_POINT('',(150.5,-85.625,1.545)); +#420628 = CIRCLE('',#420629,0.125); +#420629 = AXIS2_PLACEMENT_3D('',#420630,#420631,#420632); +#420630 = CARTESIAN_POINT('',(150.5,-85.5,1.545)); +#420631 = DIRECTION('',(-0.,0.,-1.)); +#420632 = DIRECTION('',(-0.,-1.,0.)); +#420633 = PLANE('',#420634); +#420634 = AXIS2_PLACEMENT_3D('',#420635,#420636,#420637); +#420635 = CARTESIAN_POINT('',(150.5,-85.65,1.545)); +#420636 = DIRECTION('',(0.,0.,1.)); +#420637 = DIRECTION('',(1.,0.,-0.)); +#420638 = ADVANCED_FACE('',(#420639),#420650,.F.); +#420639 = FACE_BOUND('',#420640,.T.); +#420640 = EDGE_LOOP('',(#420641,#420642,#420648,#420649)); +#420641 = ORIENTED_EDGE('',*,*,#420605,.T.); +#420642 = ORIENTED_EDGE('',*,*,#420643,.T.); +#420643 = EDGE_CURVE('',#420606,#420626,#420644,.T.); +#420644 = LINE('',#420645,#420646); +#420645 = CARTESIAN_POINT('',(150.5,-85.625,-3.6E-02)); +#420646 = VECTOR('',#420647,1.); +#420647 = DIRECTION('',(0.,0.,1.)); +#420648 = ORIENTED_EDGE('',*,*,#420625,.F.); +#420649 = ORIENTED_EDGE('',*,*,#420643,.F.); +#420650 = CYLINDRICAL_SURFACE('',#420651,0.125); +#420651 = AXIS2_PLACEMENT_3D('',#420652,#420653,#420654); +#420652 = CARTESIAN_POINT('',(150.5,-85.5,-3.6E-02)); +#420653 = DIRECTION('',(-0.,-0.,-1.)); +#420654 = DIRECTION('',(-0.,-1.,0.)); +#420655 = MANIFOLD_SOLID_BREP('',#420656); +#420656 = CLOSED_SHELL('',(#420657,#420690,#420710,#420730)); +#420657 = ADVANCED_FACE('',(#420658),#420685,.T.); +#420658 = FACE_BOUND('',#420659,.F.); +#420659 = EDGE_LOOP('',(#420660,#420670,#420677,#420678)); +#420660 = ORIENTED_EDGE('',*,*,#420661,.T.); +#420661 = EDGE_CURVE('',#420662,#420664,#420666,.T.); +#420662 = VERTEX_POINT('',#420663); +#420663 = CARTESIAN_POINT('',(150.5,-75.15,-3.5E-02)); +#420664 = VERTEX_POINT('',#420665); +#420665 = CARTESIAN_POINT('',(150.5,-75.15,1.545)); +#420666 = LINE('',#420667,#420668); +#420667 = CARTESIAN_POINT('',(150.5,-75.15,-3.5E-02)); +#420668 = VECTOR('',#420669,1.); +#420669 = DIRECTION('',(0.,0.,1.)); +#420670 = ORIENTED_EDGE('',*,*,#420671,.T.); +#420671 = EDGE_CURVE('',#420664,#420664,#420672,.T.); +#420672 = CIRCLE('',#420673,0.15); +#420673 = AXIS2_PLACEMENT_3D('',#420674,#420675,#420676); +#420674 = CARTESIAN_POINT('',(150.5,-75.,1.545)); +#420675 = DIRECTION('',(0.,0.,1.)); +#420676 = DIRECTION('',(-0.,-1.,0.)); +#420677 = ORIENTED_EDGE('',*,*,#420661,.F.); +#420678 = ORIENTED_EDGE('',*,*,#420679,.F.); +#420679 = EDGE_CURVE('',#420662,#420662,#420680,.T.); +#420680 = CIRCLE('',#420681,0.15); +#420681 = AXIS2_PLACEMENT_3D('',#420682,#420683,#420684); +#420682 = CARTESIAN_POINT('',(150.5,-75.,-3.5E-02)); +#420683 = DIRECTION('',(0.,0.,1.)); +#420684 = DIRECTION('',(-0.,-1.,0.)); +#420685 = CYLINDRICAL_SURFACE('',#420686,0.15); +#420686 = AXIS2_PLACEMENT_3D('',#420687,#420688,#420689); +#420687 = CARTESIAN_POINT('',(150.5,-75.,-3.5E-02)); +#420688 = DIRECTION('',(-0.,-0.,-1.)); +#420689 = DIRECTION('',(-0.,-1.,0.)); +#420690 = ADVANCED_FACE('',(#420691,#420694),#420705,.F.); +#420691 = FACE_BOUND('',#420692,.F.); +#420692 = EDGE_LOOP('',(#420693)); +#420693 = ORIENTED_EDGE('',*,*,#420679,.T.); +#420694 = FACE_BOUND('',#420695,.F.); +#420695 = EDGE_LOOP('',(#420696)); +#420696 = ORIENTED_EDGE('',*,*,#420697,.T.); +#420697 = EDGE_CURVE('',#420698,#420698,#420700,.T.); +#420698 = VERTEX_POINT('',#420699); +#420699 = CARTESIAN_POINT('',(150.5,-75.125,-3.5E-02)); +#420700 = CIRCLE('',#420701,0.125); +#420701 = AXIS2_PLACEMENT_3D('',#420702,#420703,#420704); +#420702 = CARTESIAN_POINT('',(150.5,-75.,-3.5E-02)); +#420703 = DIRECTION('',(-0.,0.,-1.)); +#420704 = DIRECTION('',(-0.,-1.,0.)); +#420705 = PLANE('',#420706); +#420706 = AXIS2_PLACEMENT_3D('',#420707,#420708,#420709); +#420707 = CARTESIAN_POINT('',(150.5,-75.15,-3.5E-02)); +#420708 = DIRECTION('',(0.,0.,1.)); +#420709 = DIRECTION('',(1.,0.,-0.)); +#420710 = ADVANCED_FACE('',(#420711,#420714),#420725,.T.); +#420711 = FACE_BOUND('',#420712,.T.); +#420712 = EDGE_LOOP('',(#420713)); +#420713 = ORIENTED_EDGE('',*,*,#420671,.T.); +#420714 = FACE_BOUND('',#420715,.T.); +#420715 = EDGE_LOOP('',(#420716)); +#420716 = ORIENTED_EDGE('',*,*,#420717,.T.); +#420717 = EDGE_CURVE('',#420718,#420718,#420720,.T.); +#420718 = VERTEX_POINT('',#420719); +#420719 = CARTESIAN_POINT('',(150.5,-75.125,1.545)); +#420720 = CIRCLE('',#420721,0.125); +#420721 = AXIS2_PLACEMENT_3D('',#420722,#420723,#420724); +#420722 = CARTESIAN_POINT('',(150.5,-75.,1.545)); +#420723 = DIRECTION('',(-0.,0.,-1.)); +#420724 = DIRECTION('',(-0.,-1.,0.)); +#420725 = PLANE('',#420726); +#420726 = AXIS2_PLACEMENT_3D('',#420727,#420728,#420729); +#420727 = CARTESIAN_POINT('',(150.5,-75.15,1.545)); +#420728 = DIRECTION('',(0.,0.,1.)); +#420729 = DIRECTION('',(1.,0.,-0.)); +#420730 = ADVANCED_FACE('',(#420731),#420742,.F.); +#420731 = FACE_BOUND('',#420732,.T.); +#420732 = EDGE_LOOP('',(#420733,#420734,#420740,#420741)); +#420733 = ORIENTED_EDGE('',*,*,#420697,.T.); +#420734 = ORIENTED_EDGE('',*,*,#420735,.T.); +#420735 = EDGE_CURVE('',#420698,#420718,#420736,.T.); +#420736 = LINE('',#420737,#420738); +#420737 = CARTESIAN_POINT('',(150.5,-75.125,-3.6E-02)); +#420738 = VECTOR('',#420739,1.); +#420739 = DIRECTION('',(0.,0.,1.)); +#420740 = ORIENTED_EDGE('',*,*,#420717,.F.); +#420741 = ORIENTED_EDGE('',*,*,#420735,.F.); +#420742 = CYLINDRICAL_SURFACE('',#420743,0.125); +#420743 = AXIS2_PLACEMENT_3D('',#420744,#420745,#420746); +#420744 = CARTESIAN_POINT('',(150.5,-75.,-3.6E-02)); +#420745 = DIRECTION('',(-0.,-0.,-1.)); +#420746 = DIRECTION('',(-0.,-1.,0.)); +#420747 = MANIFOLD_SOLID_BREP('',#420748); +#420748 = CLOSED_SHELL('',(#420749,#420782,#420802,#420822)); +#420749 = ADVANCED_FACE('',(#420750),#420777,.T.); +#420750 = FACE_BOUND('',#420751,.F.); +#420751 = EDGE_LOOP('',(#420752,#420762,#420769,#420770)); +#420752 = ORIENTED_EDGE('',*,*,#420753,.T.); +#420753 = EDGE_CURVE('',#420754,#420756,#420758,.T.); +#420754 = VERTEX_POINT('',#420755); +#420755 = CARTESIAN_POINT('',(133.95,-71.05,-3.5E-02)); +#420756 = VERTEX_POINT('',#420757); +#420757 = CARTESIAN_POINT('',(133.95,-71.05,1.545)); +#420758 = LINE('',#420759,#420760); +#420759 = CARTESIAN_POINT('',(133.95,-71.05,-3.5E-02)); +#420760 = VECTOR('',#420761,1.); +#420761 = DIRECTION('',(0.,0.,1.)); +#420762 = ORIENTED_EDGE('',*,*,#420763,.T.); +#420763 = EDGE_CURVE('',#420756,#420756,#420764,.T.); +#420764 = CIRCLE('',#420765,0.15); +#420765 = AXIS2_PLACEMENT_3D('',#420766,#420767,#420768); +#420766 = CARTESIAN_POINT('',(133.95,-70.9,1.545)); +#420767 = DIRECTION('',(0.,0.,1.)); +#420768 = DIRECTION('',(-0.,-1.,0.)); +#420769 = ORIENTED_EDGE('',*,*,#420753,.F.); +#420770 = ORIENTED_EDGE('',*,*,#420771,.F.); +#420771 = EDGE_CURVE('',#420754,#420754,#420772,.T.); +#420772 = CIRCLE('',#420773,0.15); +#420773 = AXIS2_PLACEMENT_3D('',#420774,#420775,#420776); +#420774 = CARTESIAN_POINT('',(133.95,-70.9,-3.5E-02)); +#420775 = DIRECTION('',(0.,0.,1.)); +#420776 = DIRECTION('',(-0.,-1.,0.)); +#420777 = CYLINDRICAL_SURFACE('',#420778,0.15); +#420778 = AXIS2_PLACEMENT_3D('',#420779,#420780,#420781); +#420779 = CARTESIAN_POINT('',(133.95,-70.9,-3.5E-02)); +#420780 = DIRECTION('',(-0.,-0.,-1.)); +#420781 = DIRECTION('',(-0.,-1.,0.)); +#420782 = ADVANCED_FACE('',(#420783,#420786),#420797,.F.); +#420783 = FACE_BOUND('',#420784,.F.); +#420784 = EDGE_LOOP('',(#420785)); +#420785 = ORIENTED_EDGE('',*,*,#420771,.T.); +#420786 = FACE_BOUND('',#420787,.F.); +#420787 = EDGE_LOOP('',(#420788)); +#420788 = ORIENTED_EDGE('',*,*,#420789,.T.); +#420789 = EDGE_CURVE('',#420790,#420790,#420792,.T.); +#420790 = VERTEX_POINT('',#420791); +#420791 = CARTESIAN_POINT('',(133.95,-71.025,-3.5E-02)); +#420792 = CIRCLE('',#420793,0.125); +#420793 = AXIS2_PLACEMENT_3D('',#420794,#420795,#420796); +#420794 = CARTESIAN_POINT('',(133.95,-70.9,-3.5E-02)); +#420795 = DIRECTION('',(-0.,0.,-1.)); +#420796 = DIRECTION('',(-0.,-1.,0.)); +#420797 = PLANE('',#420798); +#420798 = AXIS2_PLACEMENT_3D('',#420799,#420800,#420801); +#420799 = CARTESIAN_POINT('',(133.95,-71.05,-3.5E-02)); +#420800 = DIRECTION('',(0.,0.,1.)); +#420801 = DIRECTION('',(1.,0.,-0.)); +#420802 = ADVANCED_FACE('',(#420803,#420806),#420817,.T.); +#420803 = FACE_BOUND('',#420804,.T.); +#420804 = EDGE_LOOP('',(#420805)); +#420805 = ORIENTED_EDGE('',*,*,#420763,.T.); +#420806 = FACE_BOUND('',#420807,.T.); +#420807 = EDGE_LOOP('',(#420808)); +#420808 = ORIENTED_EDGE('',*,*,#420809,.T.); +#420809 = EDGE_CURVE('',#420810,#420810,#420812,.T.); +#420810 = VERTEX_POINT('',#420811); +#420811 = CARTESIAN_POINT('',(133.95,-71.025,1.545)); +#420812 = CIRCLE('',#420813,0.125); +#420813 = AXIS2_PLACEMENT_3D('',#420814,#420815,#420816); +#420814 = CARTESIAN_POINT('',(133.95,-70.9,1.545)); +#420815 = DIRECTION('',(-0.,0.,-1.)); +#420816 = DIRECTION('',(-0.,-1.,0.)); +#420817 = PLANE('',#420818); +#420818 = AXIS2_PLACEMENT_3D('',#420819,#420820,#420821); +#420819 = CARTESIAN_POINT('',(133.95,-71.05,1.545)); +#420820 = DIRECTION('',(0.,0.,1.)); +#420821 = DIRECTION('',(1.,0.,-0.)); +#420822 = ADVANCED_FACE('',(#420823),#420834,.F.); +#420823 = FACE_BOUND('',#420824,.T.); +#420824 = EDGE_LOOP('',(#420825,#420826,#420832,#420833)); +#420825 = ORIENTED_EDGE('',*,*,#420789,.T.); +#420826 = ORIENTED_EDGE('',*,*,#420827,.T.); +#420827 = EDGE_CURVE('',#420790,#420810,#420828,.T.); +#420828 = LINE('',#420829,#420830); +#420829 = CARTESIAN_POINT('',(133.95,-71.025,-3.6E-02)); +#420830 = VECTOR('',#420831,1.); +#420831 = DIRECTION('',(0.,0.,1.)); +#420832 = ORIENTED_EDGE('',*,*,#420809,.F.); +#420833 = ORIENTED_EDGE('',*,*,#420827,.F.); +#420834 = CYLINDRICAL_SURFACE('',#420835,0.125); +#420835 = AXIS2_PLACEMENT_3D('',#420836,#420837,#420838); +#420836 = CARTESIAN_POINT('',(133.95,-70.9,-3.6E-02)); +#420837 = DIRECTION('',(-0.,-0.,-1.)); +#420838 = DIRECTION('',(-0.,-1.,0.)); +#420839 = MANIFOLD_SOLID_BREP('',#420840); +#420840 = CLOSED_SHELL('',(#420841,#420874,#420894,#420914)); +#420841 = ADVANCED_FACE('',(#420842),#420869,.T.); +#420842 = FACE_BOUND('',#420843,.F.); +#420843 = EDGE_LOOP('',(#420844,#420854,#420861,#420862)); +#420844 = ORIENTED_EDGE('',*,*,#420845,.T.); +#420845 = EDGE_CURVE('',#420846,#420848,#420850,.T.); +#420846 = VERTEX_POINT('',#420847); +#420847 = CARTESIAN_POINT('',(141.3,-98.95,-3.5E-02)); +#420848 = VERTEX_POINT('',#420849); +#420849 = CARTESIAN_POINT('',(141.3,-98.95,1.545)); +#420850 = LINE('',#420851,#420852); +#420851 = CARTESIAN_POINT('',(141.3,-98.95,-3.5E-02)); +#420852 = VECTOR('',#420853,1.); +#420853 = DIRECTION('',(0.,0.,1.)); +#420854 = ORIENTED_EDGE('',*,*,#420855,.T.); +#420855 = EDGE_CURVE('',#420848,#420848,#420856,.T.); +#420856 = CIRCLE('',#420857,0.15); +#420857 = AXIS2_PLACEMENT_3D('',#420858,#420859,#420860); +#420858 = CARTESIAN_POINT('',(141.3,-98.8,1.545)); +#420859 = DIRECTION('',(0.,0.,1.)); +#420860 = DIRECTION('',(-0.,-1.,0.)); +#420861 = ORIENTED_EDGE('',*,*,#420845,.F.); +#420862 = ORIENTED_EDGE('',*,*,#420863,.F.); +#420863 = EDGE_CURVE('',#420846,#420846,#420864,.T.); +#420864 = CIRCLE('',#420865,0.15); +#420865 = AXIS2_PLACEMENT_3D('',#420866,#420867,#420868); +#420866 = CARTESIAN_POINT('',(141.3,-98.8,-3.5E-02)); +#420867 = DIRECTION('',(0.,0.,1.)); +#420868 = DIRECTION('',(-0.,-1.,0.)); +#420869 = CYLINDRICAL_SURFACE('',#420870,0.15); +#420870 = AXIS2_PLACEMENT_3D('',#420871,#420872,#420873); +#420871 = CARTESIAN_POINT('',(141.3,-98.8,-3.5E-02)); +#420872 = DIRECTION('',(-0.,-0.,-1.)); +#420873 = DIRECTION('',(-0.,-1.,0.)); +#420874 = ADVANCED_FACE('',(#420875,#420878),#420889,.F.); +#420875 = FACE_BOUND('',#420876,.F.); +#420876 = EDGE_LOOP('',(#420877)); +#420877 = ORIENTED_EDGE('',*,*,#420863,.T.); +#420878 = FACE_BOUND('',#420879,.F.); +#420879 = EDGE_LOOP('',(#420880)); +#420880 = ORIENTED_EDGE('',*,*,#420881,.T.); +#420881 = EDGE_CURVE('',#420882,#420882,#420884,.T.); +#420882 = VERTEX_POINT('',#420883); +#420883 = CARTESIAN_POINT('',(141.3,-98.925,-3.5E-02)); +#420884 = CIRCLE('',#420885,0.125); +#420885 = AXIS2_PLACEMENT_3D('',#420886,#420887,#420888); +#420886 = CARTESIAN_POINT('',(141.3,-98.8,-3.5E-02)); +#420887 = DIRECTION('',(-0.,0.,-1.)); +#420888 = DIRECTION('',(-0.,-1.,0.)); +#420889 = PLANE('',#420890); +#420890 = AXIS2_PLACEMENT_3D('',#420891,#420892,#420893); +#420891 = CARTESIAN_POINT('',(141.3,-98.95,-3.5E-02)); +#420892 = DIRECTION('',(0.,0.,1.)); +#420893 = DIRECTION('',(1.,0.,-0.)); +#420894 = ADVANCED_FACE('',(#420895,#420898),#420909,.T.); +#420895 = FACE_BOUND('',#420896,.T.); +#420896 = EDGE_LOOP('',(#420897)); +#420897 = ORIENTED_EDGE('',*,*,#420855,.T.); +#420898 = FACE_BOUND('',#420899,.T.); +#420899 = EDGE_LOOP('',(#420900)); +#420900 = ORIENTED_EDGE('',*,*,#420901,.T.); +#420901 = EDGE_CURVE('',#420902,#420902,#420904,.T.); +#420902 = VERTEX_POINT('',#420903); +#420903 = CARTESIAN_POINT('',(141.3,-98.925,1.545)); +#420904 = CIRCLE('',#420905,0.125); +#420905 = AXIS2_PLACEMENT_3D('',#420906,#420907,#420908); +#420906 = CARTESIAN_POINT('',(141.3,-98.8,1.545)); +#420907 = DIRECTION('',(-0.,0.,-1.)); +#420908 = DIRECTION('',(-0.,-1.,0.)); +#420909 = PLANE('',#420910); +#420910 = AXIS2_PLACEMENT_3D('',#420911,#420912,#420913); +#420911 = CARTESIAN_POINT('',(141.3,-98.95,1.545)); +#420912 = DIRECTION('',(0.,0.,1.)); +#420913 = DIRECTION('',(1.,0.,-0.)); +#420914 = ADVANCED_FACE('',(#420915),#420926,.F.); +#420915 = FACE_BOUND('',#420916,.T.); +#420916 = EDGE_LOOP('',(#420917,#420918,#420924,#420925)); +#420917 = ORIENTED_EDGE('',*,*,#420881,.T.); +#420918 = ORIENTED_EDGE('',*,*,#420919,.T.); +#420919 = EDGE_CURVE('',#420882,#420902,#420920,.T.); +#420920 = LINE('',#420921,#420922); +#420921 = CARTESIAN_POINT('',(141.3,-98.925,-3.6E-02)); +#420922 = VECTOR('',#420923,1.); +#420923 = DIRECTION('',(0.,0.,1.)); +#420924 = ORIENTED_EDGE('',*,*,#420901,.F.); +#420925 = ORIENTED_EDGE('',*,*,#420919,.F.); +#420926 = CYLINDRICAL_SURFACE('',#420927,0.125); +#420927 = AXIS2_PLACEMENT_3D('',#420928,#420929,#420930); +#420928 = CARTESIAN_POINT('',(141.3,-98.8,-3.6E-02)); +#420929 = DIRECTION('',(-0.,-0.,-1.)); +#420930 = DIRECTION('',(-0.,-1.,0.)); +#420931 = MANIFOLD_SOLID_BREP('',#420932); +#420932 = CLOSED_SHELL('',(#420933,#420966,#420986,#421006)); +#420933 = ADVANCED_FACE('',(#420934),#420961,.T.); +#420934 = FACE_BOUND('',#420935,.F.); +#420935 = EDGE_LOOP('',(#420936,#420946,#420953,#420954)); +#420936 = ORIENTED_EDGE('',*,*,#420937,.T.); +#420937 = EDGE_CURVE('',#420938,#420940,#420942,.T.); +#420938 = VERTEX_POINT('',#420939); +#420939 = CARTESIAN_POINT('',(153.8,-124.85,-3.5E-02)); +#420940 = VERTEX_POINT('',#420941); +#420941 = CARTESIAN_POINT('',(153.8,-124.85,1.545)); +#420942 = LINE('',#420943,#420944); +#420943 = CARTESIAN_POINT('',(153.8,-124.85,-3.5E-02)); +#420944 = VECTOR('',#420945,1.); +#420945 = DIRECTION('',(0.,0.,1.)); +#420946 = ORIENTED_EDGE('',*,*,#420947,.T.); +#420947 = EDGE_CURVE('',#420940,#420940,#420948,.T.); +#420948 = CIRCLE('',#420949,0.15); +#420949 = AXIS2_PLACEMENT_3D('',#420950,#420951,#420952); +#420950 = CARTESIAN_POINT('',(153.8,-124.7,1.545)); +#420951 = DIRECTION('',(0.,0.,1.)); +#420952 = DIRECTION('',(-0.,-1.,0.)); +#420953 = ORIENTED_EDGE('',*,*,#420937,.F.); +#420954 = ORIENTED_EDGE('',*,*,#420955,.F.); +#420955 = EDGE_CURVE('',#420938,#420938,#420956,.T.); +#420956 = CIRCLE('',#420957,0.15); +#420957 = AXIS2_PLACEMENT_3D('',#420958,#420959,#420960); +#420958 = CARTESIAN_POINT('',(153.8,-124.7,-3.5E-02)); +#420959 = DIRECTION('',(0.,0.,1.)); +#420960 = DIRECTION('',(-0.,-1.,0.)); +#420961 = CYLINDRICAL_SURFACE('',#420962,0.15); +#420962 = AXIS2_PLACEMENT_3D('',#420963,#420964,#420965); +#420963 = CARTESIAN_POINT('',(153.8,-124.7,-3.5E-02)); +#420964 = DIRECTION('',(-0.,-0.,-1.)); +#420965 = DIRECTION('',(-0.,-1.,0.)); +#420966 = ADVANCED_FACE('',(#420967,#420970),#420981,.F.); +#420967 = FACE_BOUND('',#420968,.F.); +#420968 = EDGE_LOOP('',(#420969)); +#420969 = ORIENTED_EDGE('',*,*,#420955,.T.); +#420970 = FACE_BOUND('',#420971,.F.); +#420971 = EDGE_LOOP('',(#420972)); +#420972 = ORIENTED_EDGE('',*,*,#420973,.T.); +#420973 = EDGE_CURVE('',#420974,#420974,#420976,.T.); +#420974 = VERTEX_POINT('',#420975); +#420975 = CARTESIAN_POINT('',(153.8,-124.825,-3.5E-02)); +#420976 = CIRCLE('',#420977,0.125); +#420977 = AXIS2_PLACEMENT_3D('',#420978,#420979,#420980); +#420978 = CARTESIAN_POINT('',(153.8,-124.7,-3.5E-02)); +#420979 = DIRECTION('',(-0.,0.,-1.)); +#420980 = DIRECTION('',(-0.,-1.,0.)); +#420981 = PLANE('',#420982); +#420982 = AXIS2_PLACEMENT_3D('',#420983,#420984,#420985); +#420983 = CARTESIAN_POINT('',(153.8,-124.85,-3.5E-02)); +#420984 = DIRECTION('',(0.,0.,1.)); +#420985 = DIRECTION('',(1.,0.,-0.)); +#420986 = ADVANCED_FACE('',(#420987,#420990),#421001,.T.); +#420987 = FACE_BOUND('',#420988,.T.); +#420988 = EDGE_LOOP('',(#420989)); +#420989 = ORIENTED_EDGE('',*,*,#420947,.T.); +#420990 = FACE_BOUND('',#420991,.T.); +#420991 = EDGE_LOOP('',(#420992)); +#420992 = ORIENTED_EDGE('',*,*,#420993,.T.); +#420993 = EDGE_CURVE('',#420994,#420994,#420996,.T.); +#420994 = VERTEX_POINT('',#420995); +#420995 = CARTESIAN_POINT('',(153.8,-124.825,1.545)); +#420996 = CIRCLE('',#420997,0.125); +#420997 = AXIS2_PLACEMENT_3D('',#420998,#420999,#421000); +#420998 = CARTESIAN_POINT('',(153.8,-124.7,1.545)); +#420999 = DIRECTION('',(-0.,0.,-1.)); +#421000 = DIRECTION('',(-0.,-1.,0.)); +#421001 = PLANE('',#421002); +#421002 = AXIS2_PLACEMENT_3D('',#421003,#421004,#421005); +#421003 = CARTESIAN_POINT('',(153.8,-124.85,1.545)); +#421004 = DIRECTION('',(0.,0.,1.)); +#421005 = DIRECTION('',(1.,0.,-0.)); +#421006 = ADVANCED_FACE('',(#421007),#421018,.F.); +#421007 = FACE_BOUND('',#421008,.T.); +#421008 = EDGE_LOOP('',(#421009,#421010,#421016,#421017)); +#421009 = ORIENTED_EDGE('',*,*,#420973,.T.); +#421010 = ORIENTED_EDGE('',*,*,#421011,.T.); +#421011 = EDGE_CURVE('',#420974,#420994,#421012,.T.); +#421012 = LINE('',#421013,#421014); +#421013 = CARTESIAN_POINT('',(153.8,-124.825,-3.6E-02)); +#421014 = VECTOR('',#421015,1.); +#421015 = DIRECTION('',(0.,0.,1.)); +#421016 = ORIENTED_EDGE('',*,*,#420993,.F.); +#421017 = ORIENTED_EDGE('',*,*,#421011,.F.); +#421018 = CYLINDRICAL_SURFACE('',#421019,0.125); +#421019 = AXIS2_PLACEMENT_3D('',#421020,#421021,#421022); +#421020 = CARTESIAN_POINT('',(153.8,-124.7,-3.6E-02)); +#421021 = DIRECTION('',(-0.,-0.,-1.)); +#421022 = DIRECTION('',(-0.,-1.,0.)); +#421023 = MANIFOLD_SOLID_BREP('',#421024); +#421024 = CLOSED_SHELL('',(#421025,#421058,#421078,#421098)); +#421025 = ADVANCED_FACE('',(#421026),#421053,.T.); +#421026 = FACE_BOUND('',#421027,.F.); +#421027 = EDGE_LOOP('',(#421028,#421038,#421045,#421046)); +#421028 = ORIENTED_EDGE('',*,*,#421029,.T.); +#421029 = EDGE_CURVE('',#421030,#421032,#421034,.T.); +#421030 = VERTEX_POINT('',#421031); +#421031 = CARTESIAN_POINT('',(153.8,-86.15,-3.5E-02)); +#421032 = VERTEX_POINT('',#421033); +#421033 = CARTESIAN_POINT('',(153.8,-86.15,1.545)); +#421034 = LINE('',#421035,#421036); +#421035 = CARTESIAN_POINT('',(153.8,-86.15,-3.5E-02)); +#421036 = VECTOR('',#421037,1.); +#421037 = DIRECTION('',(0.,0.,1.)); +#421038 = ORIENTED_EDGE('',*,*,#421039,.T.); +#421039 = EDGE_CURVE('',#421032,#421032,#421040,.T.); +#421040 = CIRCLE('',#421041,0.15); +#421041 = AXIS2_PLACEMENT_3D('',#421042,#421043,#421044); +#421042 = CARTESIAN_POINT('',(153.8,-86.,1.545)); +#421043 = DIRECTION('',(0.,0.,1.)); +#421044 = DIRECTION('',(-0.,-1.,0.)); +#421045 = ORIENTED_EDGE('',*,*,#421029,.F.); +#421046 = ORIENTED_EDGE('',*,*,#421047,.F.); +#421047 = EDGE_CURVE('',#421030,#421030,#421048,.T.); +#421048 = CIRCLE('',#421049,0.15); +#421049 = AXIS2_PLACEMENT_3D('',#421050,#421051,#421052); +#421050 = CARTESIAN_POINT('',(153.8,-86.,-3.5E-02)); +#421051 = DIRECTION('',(0.,0.,1.)); +#421052 = DIRECTION('',(-0.,-1.,0.)); +#421053 = CYLINDRICAL_SURFACE('',#421054,0.15); +#421054 = AXIS2_PLACEMENT_3D('',#421055,#421056,#421057); +#421055 = CARTESIAN_POINT('',(153.8,-86.,-3.5E-02)); +#421056 = DIRECTION('',(-0.,-0.,-1.)); +#421057 = DIRECTION('',(-0.,-1.,0.)); +#421058 = ADVANCED_FACE('',(#421059,#421062),#421073,.F.); +#421059 = FACE_BOUND('',#421060,.F.); +#421060 = EDGE_LOOP('',(#421061)); +#421061 = ORIENTED_EDGE('',*,*,#421047,.T.); +#421062 = FACE_BOUND('',#421063,.F.); +#421063 = EDGE_LOOP('',(#421064)); +#421064 = ORIENTED_EDGE('',*,*,#421065,.T.); +#421065 = EDGE_CURVE('',#421066,#421066,#421068,.T.); +#421066 = VERTEX_POINT('',#421067); +#421067 = CARTESIAN_POINT('',(153.8,-86.125,-3.5E-02)); +#421068 = CIRCLE('',#421069,0.125); +#421069 = AXIS2_PLACEMENT_3D('',#421070,#421071,#421072); +#421070 = CARTESIAN_POINT('',(153.8,-86.,-3.5E-02)); +#421071 = DIRECTION('',(-0.,0.,-1.)); +#421072 = DIRECTION('',(-0.,-1.,0.)); +#421073 = PLANE('',#421074); +#421074 = AXIS2_PLACEMENT_3D('',#421075,#421076,#421077); +#421075 = CARTESIAN_POINT('',(153.8,-86.15,-3.5E-02)); +#421076 = DIRECTION('',(0.,0.,1.)); +#421077 = DIRECTION('',(1.,0.,-0.)); +#421078 = ADVANCED_FACE('',(#421079,#421082),#421093,.T.); +#421079 = FACE_BOUND('',#421080,.T.); +#421080 = EDGE_LOOP('',(#421081)); +#421081 = ORIENTED_EDGE('',*,*,#421039,.T.); +#421082 = FACE_BOUND('',#421083,.T.); +#421083 = EDGE_LOOP('',(#421084)); +#421084 = ORIENTED_EDGE('',*,*,#421085,.T.); +#421085 = EDGE_CURVE('',#421086,#421086,#421088,.T.); +#421086 = VERTEX_POINT('',#421087); +#421087 = CARTESIAN_POINT('',(153.8,-86.125,1.545)); +#421088 = CIRCLE('',#421089,0.125); +#421089 = AXIS2_PLACEMENT_3D('',#421090,#421091,#421092); +#421090 = CARTESIAN_POINT('',(153.8,-86.,1.545)); +#421091 = DIRECTION('',(-0.,0.,-1.)); +#421092 = DIRECTION('',(-0.,-1.,0.)); +#421093 = PLANE('',#421094); +#421094 = AXIS2_PLACEMENT_3D('',#421095,#421096,#421097); +#421095 = CARTESIAN_POINT('',(153.8,-86.15,1.545)); +#421096 = DIRECTION('',(0.,0.,1.)); +#421097 = DIRECTION('',(1.,0.,-0.)); +#421098 = ADVANCED_FACE('',(#421099),#421110,.F.); +#421099 = FACE_BOUND('',#421100,.T.); +#421100 = EDGE_LOOP('',(#421101,#421102,#421108,#421109)); +#421101 = ORIENTED_EDGE('',*,*,#421065,.T.); +#421102 = ORIENTED_EDGE('',*,*,#421103,.T.); +#421103 = EDGE_CURVE('',#421066,#421086,#421104,.T.); +#421104 = LINE('',#421105,#421106); +#421105 = CARTESIAN_POINT('',(153.8,-86.125,-3.6E-02)); +#421106 = VECTOR('',#421107,1.); +#421107 = DIRECTION('',(0.,0.,1.)); +#421108 = ORIENTED_EDGE('',*,*,#421085,.F.); +#421109 = ORIENTED_EDGE('',*,*,#421103,.F.); +#421110 = CYLINDRICAL_SURFACE('',#421111,0.125); +#421111 = AXIS2_PLACEMENT_3D('',#421112,#421113,#421114); +#421112 = CARTESIAN_POINT('',(153.8,-86.,-3.6E-02)); +#421113 = DIRECTION('',(-0.,-0.,-1.)); +#421114 = DIRECTION('',(-0.,-1.,0.)); +#421115 = MANIFOLD_SOLID_BREP('',#421116); +#421116 = CLOSED_SHELL('',(#421117,#421150,#421170,#421190)); +#421117 = ADVANCED_FACE('',(#421118),#421145,.T.); +#421118 = FACE_BOUND('',#421119,.F.); +#421119 = EDGE_LOOP('',(#421120,#421130,#421137,#421138)); +#421120 = ORIENTED_EDGE('',*,*,#421121,.T.); +#421121 = EDGE_CURVE('',#421122,#421124,#421126,.T.); +#421122 = VERTEX_POINT('',#421123); +#421123 = CARTESIAN_POINT('',(125.307179,-152.75,-3.5E-02)); +#421124 = VERTEX_POINT('',#421125); +#421125 = CARTESIAN_POINT('',(125.307179,-152.75,1.545)); +#421126 = LINE('',#421127,#421128); +#421127 = CARTESIAN_POINT('',(125.307179,-152.75,-3.5E-02)); +#421128 = VECTOR('',#421129,1.); +#421129 = DIRECTION('',(0.,0.,1.)); +#421130 = ORIENTED_EDGE('',*,*,#421131,.T.); +#421131 = EDGE_CURVE('',#421124,#421124,#421132,.T.); +#421132 = CIRCLE('',#421133,0.15); +#421133 = AXIS2_PLACEMENT_3D('',#421134,#421135,#421136); +#421134 = CARTESIAN_POINT('',(125.307179,-152.6,1.545)); +#421135 = DIRECTION('',(0.,-0.,1.)); +#421136 = DIRECTION('',(9.473903143468E-14,-1.,-0.)); +#421137 = ORIENTED_EDGE('',*,*,#421121,.F.); +#421138 = ORIENTED_EDGE('',*,*,#421139,.F.); +#421139 = EDGE_CURVE('',#421122,#421122,#421140,.T.); +#421140 = CIRCLE('',#421141,0.15); +#421141 = AXIS2_PLACEMENT_3D('',#421142,#421143,#421144); +#421142 = CARTESIAN_POINT('',(125.307179,-152.6,-3.5E-02)); +#421143 = DIRECTION('',(0.,-0.,1.)); +#421144 = DIRECTION('',(9.473903143468E-14,-1.,-0.)); +#421145 = CYLINDRICAL_SURFACE('',#421146,0.15); +#421146 = AXIS2_PLACEMENT_3D('',#421147,#421148,#421149); +#421147 = CARTESIAN_POINT('',(125.307179,-152.6,-3.5E-02)); +#421148 = DIRECTION('',(-0.,0.,-1.)); +#421149 = DIRECTION('',(9.473903143468E-14,-1.,-0.)); +#421150 = ADVANCED_FACE('',(#421151,#421154),#421165,.F.); +#421151 = FACE_BOUND('',#421152,.F.); +#421152 = EDGE_LOOP('',(#421153)); +#421153 = ORIENTED_EDGE('',*,*,#421139,.T.); +#421154 = FACE_BOUND('',#421155,.F.); +#421155 = EDGE_LOOP('',(#421156)); +#421156 = ORIENTED_EDGE('',*,*,#421157,.T.); +#421157 = EDGE_CURVE('',#421158,#421158,#421160,.T.); +#421158 = VERTEX_POINT('',#421159); +#421159 = CARTESIAN_POINT('',(125.307179,-152.725,-3.5E-02)); +#421160 = CIRCLE('',#421161,0.125); +#421161 = AXIS2_PLACEMENT_3D('',#421162,#421163,#421164); +#421162 = CARTESIAN_POINT('',(125.307179,-152.6,-3.5E-02)); +#421163 = DIRECTION('',(-0.,0.,-1.)); +#421164 = DIRECTION('',(-0.,-1.,0.)); +#421165 = PLANE('',#421166); +#421166 = AXIS2_PLACEMENT_3D('',#421167,#421168,#421169); +#421167 = CARTESIAN_POINT('',(125.307179,-152.75,-3.5E-02)); +#421168 = DIRECTION('',(0.,0.,1.)); +#421169 = DIRECTION('',(1.,0.,-0.)); +#421170 = ADVANCED_FACE('',(#421171,#421174),#421185,.T.); +#421171 = FACE_BOUND('',#421172,.T.); +#421172 = EDGE_LOOP('',(#421173)); +#421173 = ORIENTED_EDGE('',*,*,#421131,.T.); +#421174 = FACE_BOUND('',#421175,.T.); +#421175 = EDGE_LOOP('',(#421176)); +#421176 = ORIENTED_EDGE('',*,*,#421177,.T.); +#421177 = EDGE_CURVE('',#421178,#421178,#421180,.T.); +#421178 = VERTEX_POINT('',#421179); +#421179 = CARTESIAN_POINT('',(125.307179,-152.725,1.545)); +#421180 = CIRCLE('',#421181,0.125); +#421181 = AXIS2_PLACEMENT_3D('',#421182,#421183,#421184); +#421182 = CARTESIAN_POINT('',(125.307179,-152.6,1.545)); +#421183 = DIRECTION('',(-0.,0.,-1.)); +#421184 = DIRECTION('',(-0.,-1.,0.)); +#421185 = PLANE('',#421186); +#421186 = AXIS2_PLACEMENT_3D('',#421187,#421188,#421189); +#421187 = CARTESIAN_POINT('',(125.307179,-152.75,1.545)); +#421188 = DIRECTION('',(0.,0.,1.)); +#421189 = DIRECTION('',(1.,0.,-0.)); +#421190 = ADVANCED_FACE('',(#421191),#421202,.F.); +#421191 = FACE_BOUND('',#421192,.T.); +#421192 = EDGE_LOOP('',(#421193,#421194,#421200,#421201)); +#421193 = ORIENTED_EDGE('',*,*,#421157,.T.); +#421194 = ORIENTED_EDGE('',*,*,#421195,.T.); +#421195 = EDGE_CURVE('',#421158,#421178,#421196,.T.); +#421196 = LINE('',#421197,#421198); +#421197 = CARTESIAN_POINT('',(125.307179,-152.725,-3.6E-02)); +#421198 = VECTOR('',#421199,1.); +#421199 = DIRECTION('',(0.,0.,1.)); +#421200 = ORIENTED_EDGE('',*,*,#421177,.F.); +#421201 = ORIENTED_EDGE('',*,*,#421195,.F.); +#421202 = CYLINDRICAL_SURFACE('',#421203,0.125); +#421203 = AXIS2_PLACEMENT_3D('',#421204,#421205,#421206); +#421204 = CARTESIAN_POINT('',(125.307179,-152.6,-3.6E-02)); +#421205 = DIRECTION('',(-0.,-0.,-1.)); +#421206 = DIRECTION('',(-0.,-1.,0.)); +#421207 = MANIFOLD_SOLID_BREP('',#421208); +#421208 = CLOSED_SHELL('',(#421209,#421242,#421262,#421282)); +#421209 = ADVANCED_FACE('',(#421210),#421237,.T.); +#421210 = FACE_BOUND('',#421211,.F.); +#421211 = EDGE_LOOP('',(#421212,#421222,#421229,#421230)); +#421212 = ORIENTED_EDGE('',*,*,#421213,.T.); +#421213 = EDGE_CURVE('',#421214,#421216,#421218,.T.); +#421214 = VERTEX_POINT('',#421215); +#421215 = CARTESIAN_POINT('',(154.4,-85.15,-3.5E-02)); +#421216 = VERTEX_POINT('',#421217); +#421217 = CARTESIAN_POINT('',(154.4,-85.15,1.545)); +#421218 = LINE('',#421219,#421220); +#421219 = CARTESIAN_POINT('',(154.4,-85.15,-3.5E-02)); +#421220 = VECTOR('',#421221,1.); +#421221 = DIRECTION('',(0.,0.,1.)); +#421222 = ORIENTED_EDGE('',*,*,#421223,.T.); +#421223 = EDGE_CURVE('',#421216,#421216,#421224,.T.); +#421224 = CIRCLE('',#421225,0.15); +#421225 = AXIS2_PLACEMENT_3D('',#421226,#421227,#421228); +#421226 = CARTESIAN_POINT('',(154.4,-85.,1.545)); +#421227 = DIRECTION('',(0.,0.,1.)); +#421228 = DIRECTION('',(-0.,-1.,0.)); +#421229 = ORIENTED_EDGE('',*,*,#421213,.F.); +#421230 = ORIENTED_EDGE('',*,*,#421231,.F.); +#421231 = EDGE_CURVE('',#421214,#421214,#421232,.T.); +#421232 = CIRCLE('',#421233,0.15); +#421233 = AXIS2_PLACEMENT_3D('',#421234,#421235,#421236); +#421234 = CARTESIAN_POINT('',(154.4,-85.,-3.5E-02)); +#421235 = DIRECTION('',(0.,0.,1.)); +#421236 = DIRECTION('',(-0.,-1.,0.)); +#421237 = CYLINDRICAL_SURFACE('',#421238,0.15); +#421238 = AXIS2_PLACEMENT_3D('',#421239,#421240,#421241); +#421239 = CARTESIAN_POINT('',(154.4,-85.,-3.5E-02)); +#421240 = DIRECTION('',(-0.,-0.,-1.)); +#421241 = DIRECTION('',(-0.,-1.,0.)); +#421242 = ADVANCED_FACE('',(#421243,#421246),#421257,.F.); +#421243 = FACE_BOUND('',#421244,.F.); +#421244 = EDGE_LOOP('',(#421245)); +#421245 = ORIENTED_EDGE('',*,*,#421231,.T.); +#421246 = FACE_BOUND('',#421247,.F.); +#421247 = EDGE_LOOP('',(#421248)); +#421248 = ORIENTED_EDGE('',*,*,#421249,.T.); +#421249 = EDGE_CURVE('',#421250,#421250,#421252,.T.); +#421250 = VERTEX_POINT('',#421251); +#421251 = CARTESIAN_POINT('',(154.4,-85.125,-3.5E-02)); +#421252 = CIRCLE('',#421253,0.125); +#421253 = AXIS2_PLACEMENT_3D('',#421254,#421255,#421256); +#421254 = CARTESIAN_POINT('',(154.4,-85.,-3.5E-02)); +#421255 = DIRECTION('',(-0.,0.,-1.)); +#421256 = DIRECTION('',(-0.,-1.,0.)); +#421257 = PLANE('',#421258); +#421258 = AXIS2_PLACEMENT_3D('',#421259,#421260,#421261); +#421259 = CARTESIAN_POINT('',(154.4,-85.15,-3.5E-02)); +#421260 = DIRECTION('',(0.,0.,1.)); +#421261 = DIRECTION('',(1.,0.,-0.)); +#421262 = ADVANCED_FACE('',(#421263,#421266),#421277,.T.); +#421263 = FACE_BOUND('',#421264,.T.); +#421264 = EDGE_LOOP('',(#421265)); +#421265 = ORIENTED_EDGE('',*,*,#421223,.T.); +#421266 = FACE_BOUND('',#421267,.T.); +#421267 = EDGE_LOOP('',(#421268)); +#421268 = ORIENTED_EDGE('',*,*,#421269,.T.); +#421269 = EDGE_CURVE('',#421270,#421270,#421272,.T.); +#421270 = VERTEX_POINT('',#421271); +#421271 = CARTESIAN_POINT('',(154.4,-85.125,1.545)); +#421272 = CIRCLE('',#421273,0.125); +#421273 = AXIS2_PLACEMENT_3D('',#421274,#421275,#421276); +#421274 = CARTESIAN_POINT('',(154.4,-85.,1.545)); +#421275 = DIRECTION('',(-0.,0.,-1.)); +#421276 = DIRECTION('',(-0.,-1.,0.)); +#421277 = PLANE('',#421278); +#421278 = AXIS2_PLACEMENT_3D('',#421279,#421280,#421281); +#421279 = CARTESIAN_POINT('',(154.4,-85.15,1.545)); +#421280 = DIRECTION('',(0.,0.,1.)); +#421281 = DIRECTION('',(1.,0.,-0.)); +#421282 = ADVANCED_FACE('',(#421283),#421294,.F.); +#421283 = FACE_BOUND('',#421284,.T.); +#421284 = EDGE_LOOP('',(#421285,#421286,#421292,#421293)); +#421285 = ORIENTED_EDGE('',*,*,#421249,.T.); +#421286 = ORIENTED_EDGE('',*,*,#421287,.T.); +#421287 = EDGE_CURVE('',#421250,#421270,#421288,.T.); +#421288 = LINE('',#421289,#421290); +#421289 = CARTESIAN_POINT('',(154.4,-85.125,-3.6E-02)); +#421290 = VECTOR('',#421291,1.); +#421291 = DIRECTION('',(0.,0.,1.)); +#421292 = ORIENTED_EDGE('',*,*,#421269,.F.); +#421293 = ORIENTED_EDGE('',*,*,#421287,.F.); +#421294 = CYLINDRICAL_SURFACE('',#421295,0.125); +#421295 = AXIS2_PLACEMENT_3D('',#421296,#421297,#421298); +#421296 = CARTESIAN_POINT('',(154.4,-85.,-3.6E-02)); +#421297 = DIRECTION('',(-0.,-0.,-1.)); +#421298 = DIRECTION('',(-0.,-1.,0.)); +#421299 = MANIFOLD_SOLID_BREP('',#421300); +#421300 = CLOSED_SHELL('',(#421301,#421334,#421354,#421374)); +#421301 = ADVANCED_FACE('',(#421302),#421329,.T.); +#421302 = FACE_BOUND('',#421303,.F.); +#421303 = EDGE_LOOP('',(#421304,#421314,#421321,#421322)); +#421304 = ORIENTED_EDGE('',*,*,#421305,.T.); +#421305 = EDGE_CURVE('',#421306,#421308,#421310,.T.); +#421306 = VERTEX_POINT('',#421307); +#421307 = CARTESIAN_POINT('',(144.1,-116.95,-3.5E-02)); +#421308 = VERTEX_POINT('',#421309); +#421309 = CARTESIAN_POINT('',(144.1,-116.95,1.545)); +#421310 = LINE('',#421311,#421312); +#421311 = CARTESIAN_POINT('',(144.1,-116.95,-3.5E-02)); +#421312 = VECTOR('',#421313,1.); +#421313 = DIRECTION('',(0.,0.,1.)); +#421314 = ORIENTED_EDGE('',*,*,#421315,.T.); +#421315 = EDGE_CURVE('',#421308,#421308,#421316,.T.); +#421316 = CIRCLE('',#421317,0.15); +#421317 = AXIS2_PLACEMENT_3D('',#421318,#421319,#421320); +#421318 = CARTESIAN_POINT('',(144.1,-116.8,1.545)); +#421319 = DIRECTION('',(0.,0.,1.)); +#421320 = DIRECTION('',(-0.,-1.,0.)); +#421321 = ORIENTED_EDGE('',*,*,#421305,.F.); +#421322 = ORIENTED_EDGE('',*,*,#421323,.F.); +#421323 = EDGE_CURVE('',#421306,#421306,#421324,.T.); +#421324 = CIRCLE('',#421325,0.15); +#421325 = AXIS2_PLACEMENT_3D('',#421326,#421327,#421328); +#421326 = CARTESIAN_POINT('',(144.1,-116.8,-3.5E-02)); +#421327 = DIRECTION('',(0.,0.,1.)); +#421328 = DIRECTION('',(-0.,-1.,0.)); +#421329 = CYLINDRICAL_SURFACE('',#421330,0.15); +#421330 = AXIS2_PLACEMENT_3D('',#421331,#421332,#421333); +#421331 = CARTESIAN_POINT('',(144.1,-116.8,-3.5E-02)); +#421332 = DIRECTION('',(-0.,-0.,-1.)); +#421333 = DIRECTION('',(-0.,-1.,0.)); +#421334 = ADVANCED_FACE('',(#421335,#421338),#421349,.F.); +#421335 = FACE_BOUND('',#421336,.F.); +#421336 = EDGE_LOOP('',(#421337)); +#421337 = ORIENTED_EDGE('',*,*,#421323,.T.); +#421338 = FACE_BOUND('',#421339,.F.); +#421339 = EDGE_LOOP('',(#421340)); +#421340 = ORIENTED_EDGE('',*,*,#421341,.T.); +#421341 = EDGE_CURVE('',#421342,#421342,#421344,.T.); +#421342 = VERTEX_POINT('',#421343); +#421343 = CARTESIAN_POINT('',(144.1,-116.925,-3.5E-02)); +#421344 = CIRCLE('',#421345,0.125); +#421345 = AXIS2_PLACEMENT_3D('',#421346,#421347,#421348); +#421346 = CARTESIAN_POINT('',(144.1,-116.8,-3.5E-02)); +#421347 = DIRECTION('',(-0.,0.,-1.)); +#421348 = DIRECTION('',(-0.,-1.,0.)); +#421349 = PLANE('',#421350); +#421350 = AXIS2_PLACEMENT_3D('',#421351,#421352,#421353); +#421351 = CARTESIAN_POINT('',(144.1,-116.95,-3.5E-02)); +#421352 = DIRECTION('',(0.,0.,1.)); +#421353 = DIRECTION('',(1.,0.,-0.)); +#421354 = ADVANCED_FACE('',(#421355,#421358),#421369,.T.); +#421355 = FACE_BOUND('',#421356,.T.); +#421356 = EDGE_LOOP('',(#421357)); +#421357 = ORIENTED_EDGE('',*,*,#421315,.T.); +#421358 = FACE_BOUND('',#421359,.T.); +#421359 = EDGE_LOOP('',(#421360)); +#421360 = ORIENTED_EDGE('',*,*,#421361,.T.); +#421361 = EDGE_CURVE('',#421362,#421362,#421364,.T.); +#421362 = VERTEX_POINT('',#421363); +#421363 = CARTESIAN_POINT('',(144.1,-116.925,1.545)); +#421364 = CIRCLE('',#421365,0.125); +#421365 = AXIS2_PLACEMENT_3D('',#421366,#421367,#421368); +#421366 = CARTESIAN_POINT('',(144.1,-116.8,1.545)); +#421367 = DIRECTION('',(-0.,0.,-1.)); +#421368 = DIRECTION('',(-0.,-1.,0.)); +#421369 = PLANE('',#421370); +#421370 = AXIS2_PLACEMENT_3D('',#421371,#421372,#421373); +#421371 = CARTESIAN_POINT('',(144.1,-116.95,1.545)); +#421372 = DIRECTION('',(0.,0.,1.)); +#421373 = DIRECTION('',(1.,0.,-0.)); +#421374 = ADVANCED_FACE('',(#421375),#421386,.F.); +#421375 = FACE_BOUND('',#421376,.T.); +#421376 = EDGE_LOOP('',(#421377,#421378,#421384,#421385)); +#421377 = ORIENTED_EDGE('',*,*,#421341,.T.); +#421378 = ORIENTED_EDGE('',*,*,#421379,.T.); +#421379 = EDGE_CURVE('',#421342,#421362,#421380,.T.); +#421380 = LINE('',#421381,#421382); +#421381 = CARTESIAN_POINT('',(144.1,-116.925,-3.6E-02)); +#421382 = VECTOR('',#421383,1.); +#421383 = DIRECTION('',(0.,0.,1.)); +#421384 = ORIENTED_EDGE('',*,*,#421361,.F.); +#421385 = ORIENTED_EDGE('',*,*,#421379,.F.); +#421386 = CYLINDRICAL_SURFACE('',#421387,0.125); +#421387 = AXIS2_PLACEMENT_3D('',#421388,#421389,#421390); +#421388 = CARTESIAN_POINT('',(144.1,-116.8,-3.6E-02)); +#421389 = DIRECTION('',(-0.,-0.,-1.)); +#421390 = DIRECTION('',(-0.,-1.,0.)); +#421391 = MANIFOLD_SOLID_BREP('',#421392); +#421392 = CLOSED_SHELL('',(#421393,#421426,#421446,#421466)); +#421393 = ADVANCED_FACE('',(#421394),#421421,.T.); +#421394 = FACE_BOUND('',#421395,.F.); +#421395 = EDGE_LOOP('',(#421396,#421406,#421413,#421414)); +#421396 = ORIENTED_EDGE('',*,*,#421397,.T.); +#421397 = EDGE_CURVE('',#421398,#421400,#421402,.T.); +#421398 = VERTEX_POINT('',#421399); +#421399 = CARTESIAN_POINT('',(140.4,-89.85,-3.5E-02)); +#421400 = VERTEX_POINT('',#421401); +#421401 = CARTESIAN_POINT('',(140.4,-89.85,1.545)); +#421402 = LINE('',#421403,#421404); +#421403 = CARTESIAN_POINT('',(140.4,-89.85,-3.5E-02)); +#421404 = VECTOR('',#421405,1.); +#421405 = DIRECTION('',(0.,0.,1.)); +#421406 = ORIENTED_EDGE('',*,*,#421407,.T.); +#421407 = EDGE_CURVE('',#421400,#421400,#421408,.T.); +#421408 = CIRCLE('',#421409,0.15); +#421409 = AXIS2_PLACEMENT_3D('',#421410,#421411,#421412); +#421410 = CARTESIAN_POINT('',(140.4,-89.7,1.545)); +#421411 = DIRECTION('',(0.,0.,1.)); +#421412 = DIRECTION('',(-0.,-1.,0.)); +#421413 = ORIENTED_EDGE('',*,*,#421397,.F.); +#421414 = ORIENTED_EDGE('',*,*,#421415,.F.); +#421415 = EDGE_CURVE('',#421398,#421398,#421416,.T.); +#421416 = CIRCLE('',#421417,0.15); +#421417 = AXIS2_PLACEMENT_3D('',#421418,#421419,#421420); +#421418 = CARTESIAN_POINT('',(140.4,-89.7,-3.5E-02)); +#421419 = DIRECTION('',(0.,0.,1.)); +#421420 = DIRECTION('',(-0.,-1.,0.)); +#421421 = CYLINDRICAL_SURFACE('',#421422,0.15); +#421422 = AXIS2_PLACEMENT_3D('',#421423,#421424,#421425); +#421423 = CARTESIAN_POINT('',(140.4,-89.7,-3.5E-02)); +#421424 = DIRECTION('',(-0.,-0.,-1.)); +#421425 = DIRECTION('',(-0.,-1.,0.)); +#421426 = ADVANCED_FACE('',(#421427,#421430),#421441,.F.); +#421427 = FACE_BOUND('',#421428,.F.); +#421428 = EDGE_LOOP('',(#421429)); +#421429 = ORIENTED_EDGE('',*,*,#421415,.T.); +#421430 = FACE_BOUND('',#421431,.F.); +#421431 = EDGE_LOOP('',(#421432)); +#421432 = ORIENTED_EDGE('',*,*,#421433,.T.); +#421433 = EDGE_CURVE('',#421434,#421434,#421436,.T.); +#421434 = VERTEX_POINT('',#421435); +#421435 = CARTESIAN_POINT('',(140.4,-89.825,-3.5E-02)); +#421436 = CIRCLE('',#421437,0.125); +#421437 = AXIS2_PLACEMENT_3D('',#421438,#421439,#421440); +#421438 = CARTESIAN_POINT('',(140.4,-89.7,-3.5E-02)); +#421439 = DIRECTION('',(-0.,0.,-1.)); +#421440 = DIRECTION('',(-0.,-1.,0.)); +#421441 = PLANE('',#421442); +#421442 = AXIS2_PLACEMENT_3D('',#421443,#421444,#421445); +#421443 = CARTESIAN_POINT('',(140.4,-89.85,-3.5E-02)); +#421444 = DIRECTION('',(0.,0.,1.)); +#421445 = DIRECTION('',(1.,0.,-0.)); +#421446 = ADVANCED_FACE('',(#421447,#421450),#421461,.T.); +#421447 = FACE_BOUND('',#421448,.T.); +#421448 = EDGE_LOOP('',(#421449)); +#421449 = ORIENTED_EDGE('',*,*,#421407,.T.); +#421450 = FACE_BOUND('',#421451,.T.); +#421451 = EDGE_LOOP('',(#421452)); +#421452 = ORIENTED_EDGE('',*,*,#421453,.T.); +#421453 = EDGE_CURVE('',#421454,#421454,#421456,.T.); +#421454 = VERTEX_POINT('',#421455); +#421455 = CARTESIAN_POINT('',(140.4,-89.825,1.545)); +#421456 = CIRCLE('',#421457,0.125); +#421457 = AXIS2_PLACEMENT_3D('',#421458,#421459,#421460); +#421458 = CARTESIAN_POINT('',(140.4,-89.7,1.545)); +#421459 = DIRECTION('',(-0.,0.,-1.)); +#421460 = DIRECTION('',(-0.,-1.,0.)); +#421461 = PLANE('',#421462); +#421462 = AXIS2_PLACEMENT_3D('',#421463,#421464,#421465); +#421463 = CARTESIAN_POINT('',(140.4,-89.85,1.545)); +#421464 = DIRECTION('',(0.,0.,1.)); +#421465 = DIRECTION('',(1.,0.,-0.)); +#421466 = ADVANCED_FACE('',(#421467),#421478,.F.); +#421467 = FACE_BOUND('',#421468,.T.); +#421468 = EDGE_LOOP('',(#421469,#421470,#421476,#421477)); +#421469 = ORIENTED_EDGE('',*,*,#421433,.T.); +#421470 = ORIENTED_EDGE('',*,*,#421471,.T.); +#421471 = EDGE_CURVE('',#421434,#421454,#421472,.T.); +#421472 = LINE('',#421473,#421474); +#421473 = CARTESIAN_POINT('',(140.4,-89.825,-3.6E-02)); +#421474 = VECTOR('',#421475,1.); +#421475 = DIRECTION('',(0.,0.,1.)); +#421476 = ORIENTED_EDGE('',*,*,#421453,.F.); +#421477 = ORIENTED_EDGE('',*,*,#421471,.F.); +#421478 = CYLINDRICAL_SURFACE('',#421479,0.125); +#421479 = AXIS2_PLACEMENT_3D('',#421480,#421481,#421482); +#421480 = CARTESIAN_POINT('',(140.4,-89.7,-3.6E-02)); +#421481 = DIRECTION('',(-0.,-0.,-1.)); +#421482 = DIRECTION('',(-0.,-1.,0.)); +#421483 = MANIFOLD_SOLID_BREP('',#421484); +#421484 = CLOSED_SHELL('',(#421485,#421518,#421538,#421558)); +#421485 = ADVANCED_FACE('',(#421486),#421513,.T.); +#421486 = FACE_BOUND('',#421487,.F.); +#421487 = EDGE_LOOP('',(#421488,#421498,#421505,#421506)); +#421488 = ORIENTED_EDGE('',*,*,#421489,.T.); +#421489 = EDGE_CURVE('',#421490,#421492,#421494,.T.); +#421490 = VERTEX_POINT('',#421491); +#421491 = CARTESIAN_POINT('',(144.8,-70.25,-3.5E-02)); +#421492 = VERTEX_POINT('',#421493); +#421493 = CARTESIAN_POINT('',(144.8,-70.25,1.545)); +#421494 = LINE('',#421495,#421496); +#421495 = CARTESIAN_POINT('',(144.8,-70.25,-3.5E-02)); +#421496 = VECTOR('',#421497,1.); +#421497 = DIRECTION('',(0.,0.,1.)); +#421498 = ORIENTED_EDGE('',*,*,#421499,.T.); +#421499 = EDGE_CURVE('',#421492,#421492,#421500,.T.); +#421500 = CIRCLE('',#421501,0.15); +#421501 = AXIS2_PLACEMENT_3D('',#421502,#421503,#421504); +#421502 = CARTESIAN_POINT('',(144.8,-70.1,1.545)); +#421503 = DIRECTION('',(0.,0.,1.)); +#421504 = DIRECTION('',(-0.,-1.,0.)); +#421505 = ORIENTED_EDGE('',*,*,#421489,.F.); +#421506 = ORIENTED_EDGE('',*,*,#421507,.F.); +#421507 = EDGE_CURVE('',#421490,#421490,#421508,.T.); +#421508 = CIRCLE('',#421509,0.15); +#421509 = AXIS2_PLACEMENT_3D('',#421510,#421511,#421512); +#421510 = CARTESIAN_POINT('',(144.8,-70.1,-3.5E-02)); +#421511 = DIRECTION('',(0.,0.,1.)); +#421512 = DIRECTION('',(-0.,-1.,0.)); +#421513 = CYLINDRICAL_SURFACE('',#421514,0.15); +#421514 = AXIS2_PLACEMENT_3D('',#421515,#421516,#421517); +#421515 = CARTESIAN_POINT('',(144.8,-70.1,-3.5E-02)); +#421516 = DIRECTION('',(-0.,-0.,-1.)); +#421517 = DIRECTION('',(-0.,-1.,0.)); +#421518 = ADVANCED_FACE('',(#421519,#421522),#421533,.F.); +#421519 = FACE_BOUND('',#421520,.F.); +#421520 = EDGE_LOOP('',(#421521)); +#421521 = ORIENTED_EDGE('',*,*,#421507,.T.); +#421522 = FACE_BOUND('',#421523,.F.); +#421523 = EDGE_LOOP('',(#421524)); +#421524 = ORIENTED_EDGE('',*,*,#421525,.T.); +#421525 = EDGE_CURVE('',#421526,#421526,#421528,.T.); +#421526 = VERTEX_POINT('',#421527); +#421527 = CARTESIAN_POINT('',(144.8,-70.225,-3.5E-02)); +#421528 = CIRCLE('',#421529,0.125); +#421529 = AXIS2_PLACEMENT_3D('',#421530,#421531,#421532); +#421530 = CARTESIAN_POINT('',(144.8,-70.1,-3.5E-02)); +#421531 = DIRECTION('',(-0.,0.,-1.)); +#421532 = DIRECTION('',(-0.,-1.,0.)); +#421533 = PLANE('',#421534); +#421534 = AXIS2_PLACEMENT_3D('',#421535,#421536,#421537); +#421535 = CARTESIAN_POINT('',(144.8,-70.25,-3.5E-02)); +#421536 = DIRECTION('',(0.,0.,1.)); +#421537 = DIRECTION('',(1.,0.,-0.)); +#421538 = ADVANCED_FACE('',(#421539,#421542),#421553,.T.); +#421539 = FACE_BOUND('',#421540,.T.); +#421540 = EDGE_LOOP('',(#421541)); +#421541 = ORIENTED_EDGE('',*,*,#421499,.T.); +#421542 = FACE_BOUND('',#421543,.T.); +#421543 = EDGE_LOOP('',(#421544)); +#421544 = ORIENTED_EDGE('',*,*,#421545,.T.); +#421545 = EDGE_CURVE('',#421546,#421546,#421548,.T.); +#421546 = VERTEX_POINT('',#421547); +#421547 = CARTESIAN_POINT('',(144.8,-70.225,1.545)); +#421548 = CIRCLE('',#421549,0.125); +#421549 = AXIS2_PLACEMENT_3D('',#421550,#421551,#421552); +#421550 = CARTESIAN_POINT('',(144.8,-70.1,1.545)); +#421551 = DIRECTION('',(-0.,0.,-1.)); +#421552 = DIRECTION('',(-0.,-1.,0.)); +#421553 = PLANE('',#421554); +#421554 = AXIS2_PLACEMENT_3D('',#421555,#421556,#421557); +#421555 = CARTESIAN_POINT('',(144.8,-70.25,1.545)); +#421556 = DIRECTION('',(0.,0.,1.)); +#421557 = DIRECTION('',(1.,0.,-0.)); +#421558 = ADVANCED_FACE('',(#421559),#421570,.F.); +#421559 = FACE_BOUND('',#421560,.T.); +#421560 = EDGE_LOOP('',(#421561,#421562,#421568,#421569)); +#421561 = ORIENTED_EDGE('',*,*,#421525,.T.); +#421562 = ORIENTED_EDGE('',*,*,#421563,.T.); +#421563 = EDGE_CURVE('',#421526,#421546,#421564,.T.); +#421564 = LINE('',#421565,#421566); +#421565 = CARTESIAN_POINT('',(144.8,-70.225,-3.6E-02)); +#421566 = VECTOR('',#421567,1.); +#421567 = DIRECTION('',(0.,0.,1.)); +#421568 = ORIENTED_EDGE('',*,*,#421545,.F.); +#421569 = ORIENTED_EDGE('',*,*,#421563,.F.); +#421570 = CYLINDRICAL_SURFACE('',#421571,0.125); +#421571 = AXIS2_PLACEMENT_3D('',#421572,#421573,#421574); +#421572 = CARTESIAN_POINT('',(144.8,-70.1,-3.6E-02)); +#421573 = DIRECTION('',(-0.,-0.,-1.)); +#421574 = DIRECTION('',(-0.,-1.,0.)); +#421575 = MANIFOLD_SOLID_BREP('',#421576); +#421576 = CLOSED_SHELL('',(#421577,#421610,#421630,#421650)); +#421577 = ADVANCED_FACE('',(#421578),#421605,.T.); +#421578 = FACE_BOUND('',#421579,.F.); +#421579 = EDGE_LOOP('',(#421580,#421590,#421597,#421598)); +#421580 = ORIENTED_EDGE('',*,*,#421581,.T.); +#421581 = EDGE_CURVE('',#421582,#421584,#421586,.T.); +#421582 = VERTEX_POINT('',#421583); +#421583 = CARTESIAN_POINT('',(147.5,-86.65,-3.5E-02)); +#421584 = VERTEX_POINT('',#421585); +#421585 = CARTESIAN_POINT('',(147.5,-86.65,1.545)); +#421586 = LINE('',#421587,#421588); +#421587 = CARTESIAN_POINT('',(147.5,-86.65,-3.5E-02)); +#421588 = VECTOR('',#421589,1.); +#421589 = DIRECTION('',(0.,0.,1.)); +#421590 = ORIENTED_EDGE('',*,*,#421591,.T.); +#421591 = EDGE_CURVE('',#421584,#421584,#421592,.T.); +#421592 = CIRCLE('',#421593,0.15); +#421593 = AXIS2_PLACEMENT_3D('',#421594,#421595,#421596); +#421594 = CARTESIAN_POINT('',(147.5,-86.5,1.545)); +#421595 = DIRECTION('',(0.,0.,1.)); +#421596 = DIRECTION('',(-0.,-1.,0.)); +#421597 = ORIENTED_EDGE('',*,*,#421581,.F.); +#421598 = ORIENTED_EDGE('',*,*,#421599,.F.); +#421599 = EDGE_CURVE('',#421582,#421582,#421600,.T.); +#421600 = CIRCLE('',#421601,0.15); +#421601 = AXIS2_PLACEMENT_3D('',#421602,#421603,#421604); +#421602 = CARTESIAN_POINT('',(147.5,-86.5,-3.5E-02)); +#421603 = DIRECTION('',(0.,0.,1.)); +#421604 = DIRECTION('',(-0.,-1.,0.)); +#421605 = CYLINDRICAL_SURFACE('',#421606,0.15); +#421606 = AXIS2_PLACEMENT_3D('',#421607,#421608,#421609); +#421607 = CARTESIAN_POINT('',(147.5,-86.5,-3.5E-02)); +#421608 = DIRECTION('',(-0.,-0.,-1.)); +#421609 = DIRECTION('',(-0.,-1.,0.)); +#421610 = ADVANCED_FACE('',(#421611,#421614),#421625,.F.); +#421611 = FACE_BOUND('',#421612,.F.); +#421612 = EDGE_LOOP('',(#421613)); +#421613 = ORIENTED_EDGE('',*,*,#421599,.T.); +#421614 = FACE_BOUND('',#421615,.F.); +#421615 = EDGE_LOOP('',(#421616)); +#421616 = ORIENTED_EDGE('',*,*,#421617,.T.); +#421617 = EDGE_CURVE('',#421618,#421618,#421620,.T.); +#421618 = VERTEX_POINT('',#421619); +#421619 = CARTESIAN_POINT('',(147.5,-86.625,-3.5E-02)); +#421620 = CIRCLE('',#421621,0.125); +#421621 = AXIS2_PLACEMENT_3D('',#421622,#421623,#421624); +#421622 = CARTESIAN_POINT('',(147.5,-86.5,-3.5E-02)); +#421623 = DIRECTION('',(-0.,0.,-1.)); +#421624 = DIRECTION('',(-0.,-1.,0.)); +#421625 = PLANE('',#421626); +#421626 = AXIS2_PLACEMENT_3D('',#421627,#421628,#421629); +#421627 = CARTESIAN_POINT('',(147.5,-86.65,-3.5E-02)); +#421628 = DIRECTION('',(0.,0.,1.)); +#421629 = DIRECTION('',(1.,0.,-0.)); +#421630 = ADVANCED_FACE('',(#421631,#421634),#421645,.T.); +#421631 = FACE_BOUND('',#421632,.T.); +#421632 = EDGE_LOOP('',(#421633)); +#421633 = ORIENTED_EDGE('',*,*,#421591,.T.); +#421634 = FACE_BOUND('',#421635,.T.); +#421635 = EDGE_LOOP('',(#421636)); +#421636 = ORIENTED_EDGE('',*,*,#421637,.T.); +#421637 = EDGE_CURVE('',#421638,#421638,#421640,.T.); +#421638 = VERTEX_POINT('',#421639); +#421639 = CARTESIAN_POINT('',(147.5,-86.625,1.545)); +#421640 = CIRCLE('',#421641,0.125); +#421641 = AXIS2_PLACEMENT_3D('',#421642,#421643,#421644); +#421642 = CARTESIAN_POINT('',(147.5,-86.5,1.545)); +#421643 = DIRECTION('',(-0.,0.,-1.)); +#421644 = DIRECTION('',(-0.,-1.,0.)); +#421645 = PLANE('',#421646); +#421646 = AXIS2_PLACEMENT_3D('',#421647,#421648,#421649); +#421647 = CARTESIAN_POINT('',(147.5,-86.65,1.545)); +#421648 = DIRECTION('',(0.,0.,1.)); +#421649 = DIRECTION('',(1.,0.,-0.)); +#421650 = ADVANCED_FACE('',(#421651),#421662,.F.); +#421651 = FACE_BOUND('',#421652,.T.); +#421652 = EDGE_LOOP('',(#421653,#421654,#421660,#421661)); +#421653 = ORIENTED_EDGE('',*,*,#421617,.T.); +#421654 = ORIENTED_EDGE('',*,*,#421655,.T.); +#421655 = EDGE_CURVE('',#421618,#421638,#421656,.T.); +#421656 = LINE('',#421657,#421658); +#421657 = CARTESIAN_POINT('',(147.5,-86.625,-3.6E-02)); +#421658 = VECTOR('',#421659,1.); +#421659 = DIRECTION('',(0.,0.,1.)); +#421660 = ORIENTED_EDGE('',*,*,#421637,.F.); +#421661 = ORIENTED_EDGE('',*,*,#421655,.F.); +#421662 = CYLINDRICAL_SURFACE('',#421663,0.125); +#421663 = AXIS2_PLACEMENT_3D('',#421664,#421665,#421666); +#421664 = CARTESIAN_POINT('',(147.5,-86.5,-3.6E-02)); +#421665 = DIRECTION('',(-0.,-0.,-1.)); +#421666 = DIRECTION('',(-0.,-1.,0.)); +#421667 = MANIFOLD_SOLID_BREP('',#421668); +#421668 = CLOSED_SHELL('',(#421669,#421702,#421722,#421742)); +#421669 = ADVANCED_FACE('',(#421670),#421697,.T.); +#421670 = FACE_BOUND('',#421671,.F.); +#421671 = EDGE_LOOP('',(#421672,#421682,#421689,#421690)); +#421672 = ORIENTED_EDGE('',*,*,#421673,.T.); +#421673 = EDGE_CURVE('',#421674,#421676,#421678,.T.); +#421674 = VERTEX_POINT('',#421675); +#421675 = CARTESIAN_POINT('',(148.544265,-74.105735,-3.5E-02)); +#421676 = VERTEX_POINT('',#421677); +#421677 = CARTESIAN_POINT('',(148.544265,-74.105735,1.545)); +#421678 = LINE('',#421679,#421680); +#421679 = CARTESIAN_POINT('',(148.544265,-74.105735,-3.5E-02)); +#421680 = VECTOR('',#421681,1.); +#421681 = DIRECTION('',(0.,0.,1.)); +#421682 = ORIENTED_EDGE('',*,*,#421683,.T.); +#421683 = EDGE_CURVE('',#421676,#421676,#421684,.T.); +#421684 = CIRCLE('',#421685,0.15); +#421685 = AXIS2_PLACEMENT_3D('',#421686,#421687,#421688); +#421686 = CARTESIAN_POINT('',(148.544265,-73.955735,1.545)); +#421687 = DIRECTION('',(0.,0.,1.)); +#421688 = DIRECTION('',(-0.,-1.,0.)); +#421689 = ORIENTED_EDGE('',*,*,#421673,.F.); +#421690 = ORIENTED_EDGE('',*,*,#421691,.F.); +#421691 = EDGE_CURVE('',#421674,#421674,#421692,.T.); +#421692 = CIRCLE('',#421693,0.15); +#421693 = AXIS2_PLACEMENT_3D('',#421694,#421695,#421696); +#421694 = CARTESIAN_POINT('',(148.544265,-73.955735,-3.5E-02)); +#421695 = DIRECTION('',(0.,0.,1.)); +#421696 = DIRECTION('',(-0.,-1.,0.)); +#421697 = CYLINDRICAL_SURFACE('',#421698,0.15); +#421698 = AXIS2_PLACEMENT_3D('',#421699,#421700,#421701); +#421699 = CARTESIAN_POINT('',(148.544265,-73.955735,-3.5E-02)); +#421700 = DIRECTION('',(-0.,-0.,-1.)); +#421701 = DIRECTION('',(-0.,-1.,0.)); +#421702 = ADVANCED_FACE('',(#421703,#421706),#421717,.F.); +#421703 = FACE_BOUND('',#421704,.F.); +#421704 = EDGE_LOOP('',(#421705)); +#421705 = ORIENTED_EDGE('',*,*,#421691,.T.); +#421706 = FACE_BOUND('',#421707,.F.); +#421707 = EDGE_LOOP('',(#421708)); +#421708 = ORIENTED_EDGE('',*,*,#421709,.T.); +#421709 = EDGE_CURVE('',#421710,#421710,#421712,.T.); +#421710 = VERTEX_POINT('',#421711); +#421711 = CARTESIAN_POINT('',(148.544265,-74.080735,-3.5E-02)); +#421712 = CIRCLE('',#421713,0.125); +#421713 = AXIS2_PLACEMENT_3D('',#421714,#421715,#421716); +#421714 = CARTESIAN_POINT('',(148.544265,-73.955735,-3.5E-02)); +#421715 = DIRECTION('',(-0.,0.,-1.)); +#421716 = DIRECTION('',(-0.,-1.,0.)); +#421717 = PLANE('',#421718); +#421718 = AXIS2_PLACEMENT_3D('',#421719,#421720,#421721); +#421719 = CARTESIAN_POINT('',(148.544265,-74.105735,-3.5E-02)); +#421720 = DIRECTION('',(0.,0.,1.)); +#421721 = DIRECTION('',(1.,0.,-0.)); +#421722 = ADVANCED_FACE('',(#421723,#421726),#421737,.T.); +#421723 = FACE_BOUND('',#421724,.T.); +#421724 = EDGE_LOOP('',(#421725)); +#421725 = ORIENTED_EDGE('',*,*,#421683,.T.); +#421726 = FACE_BOUND('',#421727,.T.); +#421727 = EDGE_LOOP('',(#421728)); +#421728 = ORIENTED_EDGE('',*,*,#421729,.T.); +#421729 = EDGE_CURVE('',#421730,#421730,#421732,.T.); +#421730 = VERTEX_POINT('',#421731); +#421731 = CARTESIAN_POINT('',(148.544265,-74.080735,1.545)); +#421732 = CIRCLE('',#421733,0.125); +#421733 = AXIS2_PLACEMENT_3D('',#421734,#421735,#421736); +#421734 = CARTESIAN_POINT('',(148.544265,-73.955735,1.545)); +#421735 = DIRECTION('',(-0.,0.,-1.)); +#421736 = DIRECTION('',(-0.,-1.,0.)); +#421737 = PLANE('',#421738); +#421738 = AXIS2_PLACEMENT_3D('',#421739,#421740,#421741); +#421739 = CARTESIAN_POINT('',(148.544265,-74.105735,1.545)); +#421740 = DIRECTION('',(0.,0.,1.)); +#421741 = DIRECTION('',(1.,0.,-0.)); +#421742 = ADVANCED_FACE('',(#421743),#421754,.F.); +#421743 = FACE_BOUND('',#421744,.T.); +#421744 = EDGE_LOOP('',(#421745,#421746,#421752,#421753)); +#421745 = ORIENTED_EDGE('',*,*,#421709,.T.); +#421746 = ORIENTED_EDGE('',*,*,#421747,.T.); +#421747 = EDGE_CURVE('',#421710,#421730,#421748,.T.); +#421748 = LINE('',#421749,#421750); +#421749 = CARTESIAN_POINT('',(148.544265,-74.080735,-3.6E-02)); +#421750 = VECTOR('',#421751,1.); +#421751 = DIRECTION('',(0.,0.,1.)); +#421752 = ORIENTED_EDGE('',*,*,#421729,.F.); +#421753 = ORIENTED_EDGE('',*,*,#421747,.F.); +#421754 = CYLINDRICAL_SURFACE('',#421755,0.125); +#421755 = AXIS2_PLACEMENT_3D('',#421756,#421757,#421758); +#421756 = CARTESIAN_POINT('',(148.544265,-73.955735,-3.6E-02)); +#421757 = DIRECTION('',(-0.,-0.,-1.)); +#421758 = DIRECTION('',(-0.,-1.,0.)); +#421759 = MANIFOLD_SOLID_BREP('',#421760); +#421760 = CLOSED_SHELL('',(#421761,#421794,#421814,#421834)); +#421761 = ADVANCED_FACE('',(#421762),#421789,.T.); +#421762 = FACE_BOUND('',#421763,.F.); +#421763 = EDGE_LOOP('',(#421764,#421774,#421781,#421782)); +#421764 = ORIENTED_EDGE('',*,*,#421765,.T.); +#421765 = EDGE_CURVE('',#421766,#421768,#421770,.T.); +#421766 = VERTEX_POINT('',#421767); +#421767 = CARTESIAN_POINT('',(133.35,-70.15,-3.5E-02)); +#421768 = VERTEX_POINT('',#421769); +#421769 = CARTESIAN_POINT('',(133.35,-70.15,1.545)); +#421770 = LINE('',#421771,#421772); +#421771 = CARTESIAN_POINT('',(133.35,-70.15,-3.5E-02)); +#421772 = VECTOR('',#421773,1.); +#421773 = DIRECTION('',(0.,0.,1.)); +#421774 = ORIENTED_EDGE('',*,*,#421775,.T.); +#421775 = EDGE_CURVE('',#421768,#421768,#421776,.T.); +#421776 = CIRCLE('',#421777,0.15); +#421777 = AXIS2_PLACEMENT_3D('',#421778,#421779,#421780); +#421778 = CARTESIAN_POINT('',(133.35,-70.,1.545)); +#421779 = DIRECTION('',(0.,0.,1.)); +#421780 = DIRECTION('',(-0.,-1.,0.)); +#421781 = ORIENTED_EDGE('',*,*,#421765,.F.); +#421782 = ORIENTED_EDGE('',*,*,#421783,.F.); +#421783 = EDGE_CURVE('',#421766,#421766,#421784,.T.); +#421784 = CIRCLE('',#421785,0.15); +#421785 = AXIS2_PLACEMENT_3D('',#421786,#421787,#421788); +#421786 = CARTESIAN_POINT('',(133.35,-70.,-3.5E-02)); +#421787 = DIRECTION('',(0.,0.,1.)); +#421788 = DIRECTION('',(-0.,-1.,0.)); +#421789 = CYLINDRICAL_SURFACE('',#421790,0.15); +#421790 = AXIS2_PLACEMENT_3D('',#421791,#421792,#421793); +#421791 = CARTESIAN_POINT('',(133.35,-70.,-3.5E-02)); +#421792 = DIRECTION('',(-0.,-0.,-1.)); +#421793 = DIRECTION('',(-0.,-1.,0.)); +#421794 = ADVANCED_FACE('',(#421795,#421798),#421809,.F.); +#421795 = FACE_BOUND('',#421796,.F.); +#421796 = EDGE_LOOP('',(#421797)); +#421797 = ORIENTED_EDGE('',*,*,#421783,.T.); +#421798 = FACE_BOUND('',#421799,.F.); +#421799 = EDGE_LOOP('',(#421800)); +#421800 = ORIENTED_EDGE('',*,*,#421801,.T.); +#421801 = EDGE_CURVE('',#421802,#421802,#421804,.T.); +#421802 = VERTEX_POINT('',#421803); +#421803 = CARTESIAN_POINT('',(133.35,-70.125,-3.5E-02)); +#421804 = CIRCLE('',#421805,0.125); +#421805 = AXIS2_PLACEMENT_3D('',#421806,#421807,#421808); +#421806 = CARTESIAN_POINT('',(133.35,-70.,-3.5E-02)); +#421807 = DIRECTION('',(-0.,0.,-1.)); +#421808 = DIRECTION('',(-0.,-1.,0.)); +#421809 = PLANE('',#421810); +#421810 = AXIS2_PLACEMENT_3D('',#421811,#421812,#421813); +#421811 = CARTESIAN_POINT('',(133.35,-70.15,-3.5E-02)); +#421812 = DIRECTION('',(0.,0.,1.)); +#421813 = DIRECTION('',(1.,0.,-0.)); +#421814 = ADVANCED_FACE('',(#421815,#421818),#421829,.T.); +#421815 = FACE_BOUND('',#421816,.T.); +#421816 = EDGE_LOOP('',(#421817)); +#421817 = ORIENTED_EDGE('',*,*,#421775,.T.); +#421818 = FACE_BOUND('',#421819,.T.); +#421819 = EDGE_LOOP('',(#421820)); +#421820 = ORIENTED_EDGE('',*,*,#421821,.T.); +#421821 = EDGE_CURVE('',#421822,#421822,#421824,.T.); +#421822 = VERTEX_POINT('',#421823); +#421823 = CARTESIAN_POINT('',(133.35,-70.125,1.545)); +#421824 = CIRCLE('',#421825,0.125); +#421825 = AXIS2_PLACEMENT_3D('',#421826,#421827,#421828); +#421826 = CARTESIAN_POINT('',(133.35,-70.,1.545)); +#421827 = DIRECTION('',(-0.,0.,-1.)); +#421828 = DIRECTION('',(-0.,-1.,0.)); +#421829 = PLANE('',#421830); +#421830 = AXIS2_PLACEMENT_3D('',#421831,#421832,#421833); +#421831 = CARTESIAN_POINT('',(133.35,-70.15,1.545)); +#421832 = DIRECTION('',(0.,0.,1.)); +#421833 = DIRECTION('',(1.,0.,-0.)); +#421834 = ADVANCED_FACE('',(#421835),#421846,.F.); +#421835 = FACE_BOUND('',#421836,.T.); +#421836 = EDGE_LOOP('',(#421837,#421838,#421844,#421845)); +#421837 = ORIENTED_EDGE('',*,*,#421801,.T.); +#421838 = ORIENTED_EDGE('',*,*,#421839,.T.); +#421839 = EDGE_CURVE('',#421802,#421822,#421840,.T.); +#421840 = LINE('',#421841,#421842); +#421841 = CARTESIAN_POINT('',(133.35,-70.125,-3.6E-02)); +#421842 = VECTOR('',#421843,1.); +#421843 = DIRECTION('',(0.,0.,1.)); +#421844 = ORIENTED_EDGE('',*,*,#421821,.F.); +#421845 = ORIENTED_EDGE('',*,*,#421839,.F.); +#421846 = CYLINDRICAL_SURFACE('',#421847,0.125); +#421847 = AXIS2_PLACEMENT_3D('',#421848,#421849,#421850); +#421848 = CARTESIAN_POINT('',(133.35,-70.,-3.6E-02)); +#421849 = DIRECTION('',(-0.,-0.,-1.)); +#421850 = DIRECTION('',(-0.,-1.,0.)); +#421851 = MANIFOLD_SOLID_BREP('',#421852); +#421852 = CLOSED_SHELL('',(#421853,#421886,#421906,#421926)); +#421853 = ADVANCED_FACE('',(#421854),#421881,.T.); +#421854 = FACE_BOUND('',#421855,.F.); +#421855 = EDGE_LOOP('',(#421856,#421866,#421873,#421874)); +#421856 = ORIENTED_EDGE('',*,*,#421857,.T.); +#421857 = EDGE_CURVE('',#421858,#421860,#421862,.T.); +#421858 = VERTEX_POINT('',#421859); +#421859 = CARTESIAN_POINT('',(128.1,-103.85,-3.5E-02)); +#421860 = VERTEX_POINT('',#421861); +#421861 = CARTESIAN_POINT('',(128.1,-103.85,1.545)); +#421862 = LINE('',#421863,#421864); +#421863 = CARTESIAN_POINT('',(128.1,-103.85,-3.5E-02)); +#421864 = VECTOR('',#421865,1.); +#421865 = DIRECTION('',(0.,0.,1.)); +#421866 = ORIENTED_EDGE('',*,*,#421867,.T.); +#421867 = EDGE_CURVE('',#421860,#421860,#421868,.T.); +#421868 = CIRCLE('',#421869,0.15); +#421869 = AXIS2_PLACEMENT_3D('',#421870,#421871,#421872); +#421870 = CARTESIAN_POINT('',(128.1,-103.7,1.545)); +#421871 = DIRECTION('',(0.,0.,1.)); +#421872 = DIRECTION('',(-0.,-1.,0.)); +#421873 = ORIENTED_EDGE('',*,*,#421857,.F.); +#421874 = ORIENTED_EDGE('',*,*,#421875,.F.); +#421875 = EDGE_CURVE('',#421858,#421858,#421876,.T.); +#421876 = CIRCLE('',#421877,0.15); +#421877 = AXIS2_PLACEMENT_3D('',#421878,#421879,#421880); +#421878 = CARTESIAN_POINT('',(128.1,-103.7,-3.5E-02)); +#421879 = DIRECTION('',(0.,0.,1.)); +#421880 = DIRECTION('',(-0.,-1.,0.)); +#421881 = CYLINDRICAL_SURFACE('',#421882,0.15); +#421882 = AXIS2_PLACEMENT_3D('',#421883,#421884,#421885); +#421883 = CARTESIAN_POINT('',(128.1,-103.7,-3.5E-02)); +#421884 = DIRECTION('',(-0.,-0.,-1.)); +#421885 = DIRECTION('',(-0.,-1.,0.)); +#421886 = ADVANCED_FACE('',(#421887,#421890),#421901,.F.); +#421887 = FACE_BOUND('',#421888,.F.); +#421888 = EDGE_LOOP('',(#421889)); +#421889 = ORIENTED_EDGE('',*,*,#421875,.T.); +#421890 = FACE_BOUND('',#421891,.F.); +#421891 = EDGE_LOOP('',(#421892)); +#421892 = ORIENTED_EDGE('',*,*,#421893,.T.); +#421893 = EDGE_CURVE('',#421894,#421894,#421896,.T.); +#421894 = VERTEX_POINT('',#421895); +#421895 = CARTESIAN_POINT('',(128.1,-103.825,-3.5E-02)); +#421896 = CIRCLE('',#421897,0.125); +#421897 = AXIS2_PLACEMENT_3D('',#421898,#421899,#421900); +#421898 = CARTESIAN_POINT('',(128.1,-103.7,-3.5E-02)); +#421899 = DIRECTION('',(-0.,0.,-1.)); +#421900 = DIRECTION('',(-0.,-1.,0.)); +#421901 = PLANE('',#421902); +#421902 = AXIS2_PLACEMENT_3D('',#421903,#421904,#421905); +#421903 = CARTESIAN_POINT('',(128.1,-103.85,-3.5E-02)); +#421904 = DIRECTION('',(0.,0.,1.)); +#421905 = DIRECTION('',(1.,0.,-0.)); +#421906 = ADVANCED_FACE('',(#421907,#421910),#421921,.T.); +#421907 = FACE_BOUND('',#421908,.T.); +#421908 = EDGE_LOOP('',(#421909)); +#421909 = ORIENTED_EDGE('',*,*,#421867,.T.); +#421910 = FACE_BOUND('',#421911,.T.); +#421911 = EDGE_LOOP('',(#421912)); +#421912 = ORIENTED_EDGE('',*,*,#421913,.T.); +#421913 = EDGE_CURVE('',#421914,#421914,#421916,.T.); +#421914 = VERTEX_POINT('',#421915); +#421915 = CARTESIAN_POINT('',(128.1,-103.825,1.545)); +#421916 = CIRCLE('',#421917,0.125); +#421917 = AXIS2_PLACEMENT_3D('',#421918,#421919,#421920); +#421918 = CARTESIAN_POINT('',(128.1,-103.7,1.545)); +#421919 = DIRECTION('',(-0.,0.,-1.)); +#421920 = DIRECTION('',(-0.,-1.,0.)); +#421921 = PLANE('',#421922); +#421922 = AXIS2_PLACEMENT_3D('',#421923,#421924,#421925); +#421923 = CARTESIAN_POINT('',(128.1,-103.85,1.545)); +#421924 = DIRECTION('',(0.,0.,1.)); +#421925 = DIRECTION('',(1.,0.,-0.)); +#421926 = ADVANCED_FACE('',(#421927),#421938,.F.); +#421927 = FACE_BOUND('',#421928,.T.); +#421928 = EDGE_LOOP('',(#421929,#421930,#421936,#421937)); +#421929 = ORIENTED_EDGE('',*,*,#421893,.T.); +#421930 = ORIENTED_EDGE('',*,*,#421931,.T.); +#421931 = EDGE_CURVE('',#421894,#421914,#421932,.T.); +#421932 = LINE('',#421933,#421934); +#421933 = CARTESIAN_POINT('',(128.1,-103.825,-3.6E-02)); +#421934 = VECTOR('',#421935,1.); +#421935 = DIRECTION('',(0.,0.,1.)); +#421936 = ORIENTED_EDGE('',*,*,#421913,.F.); +#421937 = ORIENTED_EDGE('',*,*,#421931,.F.); +#421938 = CYLINDRICAL_SURFACE('',#421939,0.125); +#421939 = AXIS2_PLACEMENT_3D('',#421940,#421941,#421942); +#421940 = CARTESIAN_POINT('',(128.1,-103.7,-3.6E-02)); +#421941 = DIRECTION('',(-0.,-0.,-1.)); +#421942 = DIRECTION('',(-0.,-1.,0.)); +#421943 = MANIFOLD_SOLID_BREP('',#421944); +#421944 = CLOSED_SHELL('',(#421945,#421978,#421998,#422018)); +#421945 = ADVANCED_FACE('',(#421946),#421973,.T.); +#421946 = FACE_BOUND('',#421947,.F.); +#421947 = EDGE_LOOP('',(#421948,#421958,#421965,#421966)); +#421948 = ORIENTED_EDGE('',*,*,#421949,.T.); +#421949 = EDGE_CURVE('',#421950,#421952,#421954,.T.); +#421950 = VERTEX_POINT('',#421951); +#421951 = CARTESIAN_POINT('',(126.624265,-119.874265,-3.5E-02)); +#421952 = VERTEX_POINT('',#421953); +#421953 = CARTESIAN_POINT('',(126.624265,-119.874265,1.545)); +#421954 = LINE('',#421955,#421956); +#421955 = CARTESIAN_POINT('',(126.624265,-119.874265,-3.5E-02)); +#421956 = VECTOR('',#421957,1.); +#421957 = DIRECTION('',(0.,0.,1.)); +#421958 = ORIENTED_EDGE('',*,*,#421959,.T.); +#421959 = EDGE_CURVE('',#421952,#421952,#421960,.T.); +#421960 = CIRCLE('',#421961,0.15); +#421961 = AXIS2_PLACEMENT_3D('',#421962,#421963,#421964); +#421962 = CARTESIAN_POINT('',(126.624265,-119.724265,1.545)); +#421963 = DIRECTION('',(0.,0.,1.)); +#421964 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#421965 = ORIENTED_EDGE('',*,*,#421949,.F.); +#421966 = ORIENTED_EDGE('',*,*,#421967,.F.); +#421967 = EDGE_CURVE('',#421950,#421950,#421968,.T.); +#421968 = CIRCLE('',#421969,0.15); +#421969 = AXIS2_PLACEMENT_3D('',#421970,#421971,#421972); +#421970 = CARTESIAN_POINT('',(126.624265,-119.724265,-3.5E-02)); +#421971 = DIRECTION('',(0.,0.,1.)); +#421972 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#421973 = CYLINDRICAL_SURFACE('',#421974,0.15); +#421974 = AXIS2_PLACEMENT_3D('',#421975,#421976,#421977); +#421975 = CARTESIAN_POINT('',(126.624265,-119.724265,-3.5E-02)); +#421976 = DIRECTION('',(-0.,-0.,-1.)); +#421977 = DIRECTION('',(-9.473903143468E-14,-1.,0.)); +#421978 = ADVANCED_FACE('',(#421979,#421982),#421993,.F.); +#421979 = FACE_BOUND('',#421980,.F.); +#421980 = EDGE_LOOP('',(#421981)); +#421981 = ORIENTED_EDGE('',*,*,#421967,.T.); +#421982 = FACE_BOUND('',#421983,.F.); +#421983 = EDGE_LOOP('',(#421984)); +#421984 = ORIENTED_EDGE('',*,*,#421985,.T.); +#421985 = EDGE_CURVE('',#421986,#421986,#421988,.T.); +#421986 = VERTEX_POINT('',#421987); +#421987 = CARTESIAN_POINT('',(126.624265,-119.849265,-3.5E-02)); +#421988 = CIRCLE('',#421989,0.125); +#421989 = AXIS2_PLACEMENT_3D('',#421990,#421991,#421992); +#421990 = CARTESIAN_POINT('',(126.624265,-119.724265,-3.5E-02)); +#421991 = DIRECTION('',(-0.,0.,-1.)); +#421992 = DIRECTION('',(-0.,-1.,0.)); +#421993 = PLANE('',#421994); +#421994 = AXIS2_PLACEMENT_3D('',#421995,#421996,#421997); +#421995 = CARTESIAN_POINT('',(126.624265,-119.874265,-3.5E-02)); +#421996 = DIRECTION('',(0.,0.,1.)); +#421997 = DIRECTION('',(1.,0.,-0.)); +#421998 = ADVANCED_FACE('',(#421999,#422002),#422013,.T.); +#421999 = FACE_BOUND('',#422000,.T.); +#422000 = EDGE_LOOP('',(#422001)); +#422001 = ORIENTED_EDGE('',*,*,#421959,.T.); +#422002 = FACE_BOUND('',#422003,.T.); +#422003 = EDGE_LOOP('',(#422004)); +#422004 = ORIENTED_EDGE('',*,*,#422005,.T.); +#422005 = EDGE_CURVE('',#422006,#422006,#422008,.T.); +#422006 = VERTEX_POINT('',#422007); +#422007 = CARTESIAN_POINT('',(126.624265,-119.849265,1.545)); +#422008 = CIRCLE('',#422009,0.125); +#422009 = AXIS2_PLACEMENT_3D('',#422010,#422011,#422012); +#422010 = CARTESIAN_POINT('',(126.624265,-119.724265,1.545)); +#422011 = DIRECTION('',(-0.,0.,-1.)); +#422012 = DIRECTION('',(-0.,-1.,0.)); +#422013 = PLANE('',#422014); +#422014 = AXIS2_PLACEMENT_3D('',#422015,#422016,#422017); +#422015 = CARTESIAN_POINT('',(126.624265,-119.874265,1.545)); +#422016 = DIRECTION('',(0.,0.,1.)); +#422017 = DIRECTION('',(1.,0.,-0.)); +#422018 = ADVANCED_FACE('',(#422019),#422030,.F.); +#422019 = FACE_BOUND('',#422020,.T.); +#422020 = EDGE_LOOP('',(#422021,#422022,#422028,#422029)); +#422021 = ORIENTED_EDGE('',*,*,#421985,.T.); +#422022 = ORIENTED_EDGE('',*,*,#422023,.T.); +#422023 = EDGE_CURVE('',#421986,#422006,#422024,.T.); +#422024 = LINE('',#422025,#422026); +#422025 = CARTESIAN_POINT('',(126.624265,-119.849265,-3.6E-02)); +#422026 = VECTOR('',#422027,1.); +#422027 = DIRECTION('',(0.,0.,1.)); +#422028 = ORIENTED_EDGE('',*,*,#422005,.F.); +#422029 = ORIENTED_EDGE('',*,*,#422023,.F.); +#422030 = CYLINDRICAL_SURFACE('',#422031,0.125); +#422031 = AXIS2_PLACEMENT_3D('',#422032,#422033,#422034); +#422032 = CARTESIAN_POINT('',(126.624265,-119.724265,-3.6E-02)); +#422033 = DIRECTION('',(-0.,-0.,-1.)); +#422034 = DIRECTION('',(-0.,-1.,0.)); +#422035 = MANIFOLD_SOLID_BREP('',#422036); +#422036 = CLOSED_SHELL('',(#422037,#422070,#422090,#422110)); +#422037 = ADVANCED_FACE('',(#422038),#422065,.T.); +#422038 = FACE_BOUND('',#422039,.F.); +#422039 = EDGE_LOOP('',(#422040,#422050,#422057,#422058)); +#422040 = ORIENTED_EDGE('',*,*,#422041,.T.); +#422041 = EDGE_CURVE('',#422042,#422044,#422046,.T.); +#422042 = VERTEX_POINT('',#422043); +#422043 = CARTESIAN_POINT('',(136.3,-89.55,-3.5E-02)); +#422044 = VERTEX_POINT('',#422045); +#422045 = CARTESIAN_POINT('',(136.3,-89.55,1.545)); +#422046 = LINE('',#422047,#422048); +#422047 = CARTESIAN_POINT('',(136.3,-89.55,-3.5E-02)); +#422048 = VECTOR('',#422049,1.); +#422049 = DIRECTION('',(0.,0.,1.)); +#422050 = ORIENTED_EDGE('',*,*,#422051,.T.); +#422051 = EDGE_CURVE('',#422044,#422044,#422052,.T.); +#422052 = CIRCLE('',#422053,0.15); +#422053 = AXIS2_PLACEMENT_3D('',#422054,#422055,#422056); +#422054 = CARTESIAN_POINT('',(136.3,-89.4,1.545)); +#422055 = DIRECTION('',(0.,0.,1.)); +#422056 = DIRECTION('',(-0.,-1.,0.)); +#422057 = ORIENTED_EDGE('',*,*,#422041,.F.); +#422058 = ORIENTED_EDGE('',*,*,#422059,.F.); +#422059 = EDGE_CURVE('',#422042,#422042,#422060,.T.); +#422060 = CIRCLE('',#422061,0.15); +#422061 = AXIS2_PLACEMENT_3D('',#422062,#422063,#422064); +#422062 = CARTESIAN_POINT('',(136.3,-89.4,-3.5E-02)); +#422063 = DIRECTION('',(0.,0.,1.)); +#422064 = DIRECTION('',(-0.,-1.,0.)); +#422065 = CYLINDRICAL_SURFACE('',#422066,0.15); +#422066 = AXIS2_PLACEMENT_3D('',#422067,#422068,#422069); +#422067 = CARTESIAN_POINT('',(136.3,-89.4,-3.5E-02)); +#422068 = DIRECTION('',(-0.,-0.,-1.)); +#422069 = DIRECTION('',(-0.,-1.,0.)); +#422070 = ADVANCED_FACE('',(#422071,#422074),#422085,.F.); +#422071 = FACE_BOUND('',#422072,.F.); +#422072 = EDGE_LOOP('',(#422073)); +#422073 = ORIENTED_EDGE('',*,*,#422059,.T.); +#422074 = FACE_BOUND('',#422075,.F.); +#422075 = EDGE_LOOP('',(#422076)); +#422076 = ORIENTED_EDGE('',*,*,#422077,.T.); +#422077 = EDGE_CURVE('',#422078,#422078,#422080,.T.); +#422078 = VERTEX_POINT('',#422079); +#422079 = CARTESIAN_POINT('',(136.3,-89.525,-3.5E-02)); +#422080 = CIRCLE('',#422081,0.125); +#422081 = AXIS2_PLACEMENT_3D('',#422082,#422083,#422084); +#422082 = CARTESIAN_POINT('',(136.3,-89.4,-3.5E-02)); +#422083 = DIRECTION('',(-0.,0.,-1.)); +#422084 = DIRECTION('',(-0.,-1.,0.)); +#422085 = PLANE('',#422086); +#422086 = AXIS2_PLACEMENT_3D('',#422087,#422088,#422089); +#422087 = CARTESIAN_POINT('',(136.3,-89.55,-3.5E-02)); +#422088 = DIRECTION('',(0.,0.,1.)); +#422089 = DIRECTION('',(1.,0.,-0.)); +#422090 = ADVANCED_FACE('',(#422091,#422094),#422105,.T.); +#422091 = FACE_BOUND('',#422092,.T.); +#422092 = EDGE_LOOP('',(#422093)); +#422093 = ORIENTED_EDGE('',*,*,#422051,.T.); +#422094 = FACE_BOUND('',#422095,.T.); +#422095 = EDGE_LOOP('',(#422096)); +#422096 = ORIENTED_EDGE('',*,*,#422097,.T.); +#422097 = EDGE_CURVE('',#422098,#422098,#422100,.T.); +#422098 = VERTEX_POINT('',#422099); +#422099 = CARTESIAN_POINT('',(136.3,-89.525,1.545)); +#422100 = CIRCLE('',#422101,0.125); +#422101 = AXIS2_PLACEMENT_3D('',#422102,#422103,#422104); +#422102 = CARTESIAN_POINT('',(136.3,-89.4,1.545)); +#422103 = DIRECTION('',(-0.,0.,-1.)); +#422104 = DIRECTION('',(-0.,-1.,0.)); +#422105 = PLANE('',#422106); +#422106 = AXIS2_PLACEMENT_3D('',#422107,#422108,#422109); +#422107 = CARTESIAN_POINT('',(136.3,-89.55,1.545)); +#422108 = DIRECTION('',(0.,0.,1.)); +#422109 = DIRECTION('',(1.,0.,-0.)); +#422110 = ADVANCED_FACE('',(#422111),#422122,.F.); +#422111 = FACE_BOUND('',#422112,.T.); +#422112 = EDGE_LOOP('',(#422113,#422114,#422120,#422121)); +#422113 = ORIENTED_EDGE('',*,*,#422077,.T.); +#422114 = ORIENTED_EDGE('',*,*,#422115,.T.); +#422115 = EDGE_CURVE('',#422078,#422098,#422116,.T.); +#422116 = LINE('',#422117,#422118); +#422117 = CARTESIAN_POINT('',(136.3,-89.525,-3.6E-02)); +#422118 = VECTOR('',#422119,1.); +#422119 = DIRECTION('',(0.,0.,1.)); +#422120 = ORIENTED_EDGE('',*,*,#422097,.F.); +#422121 = ORIENTED_EDGE('',*,*,#422115,.F.); +#422122 = CYLINDRICAL_SURFACE('',#422123,0.125); +#422123 = AXIS2_PLACEMENT_3D('',#422124,#422125,#422126); +#422124 = CARTESIAN_POINT('',(136.3,-89.4,-3.6E-02)); +#422125 = DIRECTION('',(-0.,-0.,-1.)); +#422126 = DIRECTION('',(-0.,-1.,0.)); +#422127 = MANIFOLD_SOLID_BREP('',#422128); +#422128 = CLOSED_SHELL('',(#422129,#422162,#422182,#422202)); +#422129 = ADVANCED_FACE('',(#422130),#422157,.T.); +#422130 = FACE_BOUND('',#422131,.F.); +#422131 = EDGE_LOOP('',(#422132,#422142,#422149,#422150)); +#422132 = ORIENTED_EDGE('',*,*,#422133,.T.); +#422133 = EDGE_CURVE('',#422134,#422136,#422138,.T.); +#422134 = VERTEX_POINT('',#422135); +#422135 = CARTESIAN_POINT('',(136.999999,-122.246015,-3.5E-02)); +#422136 = VERTEX_POINT('',#422137); +#422137 = CARTESIAN_POINT('',(136.999999,-122.246015,1.545)); +#422138 = LINE('',#422139,#422140); +#422139 = CARTESIAN_POINT('',(136.999999,-122.246015,-3.5E-02)); +#422140 = VECTOR('',#422141,1.); +#422141 = DIRECTION('',(0.,0.,1.)); +#422142 = ORIENTED_EDGE('',*,*,#422143,.T.); +#422143 = EDGE_CURVE('',#422136,#422136,#422144,.T.); +#422144 = CIRCLE('',#422145,0.15); +#422145 = AXIS2_PLACEMENT_3D('',#422146,#422147,#422148); +#422146 = CARTESIAN_POINT('',(136.999999,-122.096015,1.545)); +#422147 = DIRECTION('',(0.,0.,1.)); +#422148 = DIRECTION('',(-0.,-1.,0.)); +#422149 = ORIENTED_EDGE('',*,*,#422133,.F.); +#422150 = ORIENTED_EDGE('',*,*,#422151,.F.); +#422151 = EDGE_CURVE('',#422134,#422134,#422152,.T.); +#422152 = CIRCLE('',#422153,0.15); +#422153 = AXIS2_PLACEMENT_3D('',#422154,#422155,#422156); +#422154 = CARTESIAN_POINT('',(136.999999,-122.096015,-3.5E-02)); +#422155 = DIRECTION('',(0.,0.,1.)); +#422156 = DIRECTION('',(-0.,-1.,0.)); +#422157 = CYLINDRICAL_SURFACE('',#422158,0.15); +#422158 = AXIS2_PLACEMENT_3D('',#422159,#422160,#422161); +#422159 = CARTESIAN_POINT('',(136.999999,-122.096015,-3.5E-02)); +#422160 = DIRECTION('',(-0.,-0.,-1.)); +#422161 = DIRECTION('',(-0.,-1.,0.)); +#422162 = ADVANCED_FACE('',(#422163,#422166),#422177,.F.); +#422163 = FACE_BOUND('',#422164,.F.); +#422164 = EDGE_LOOP('',(#422165)); +#422165 = ORIENTED_EDGE('',*,*,#422151,.T.); +#422166 = FACE_BOUND('',#422167,.F.); +#422167 = EDGE_LOOP('',(#422168)); +#422168 = ORIENTED_EDGE('',*,*,#422169,.T.); +#422169 = EDGE_CURVE('',#422170,#422170,#422172,.T.); +#422170 = VERTEX_POINT('',#422171); +#422171 = CARTESIAN_POINT('',(136.999999,-122.221015,-3.5E-02)); +#422172 = CIRCLE('',#422173,0.125); +#422173 = AXIS2_PLACEMENT_3D('',#422174,#422175,#422176); +#422174 = CARTESIAN_POINT('',(136.999999,-122.096015,-3.5E-02)); +#422175 = DIRECTION('',(-0.,0.,-1.)); +#422176 = DIRECTION('',(-0.,-1.,0.)); +#422177 = PLANE('',#422178); +#422178 = AXIS2_PLACEMENT_3D('',#422179,#422180,#422181); +#422179 = CARTESIAN_POINT('',(136.999999,-122.246015,-3.5E-02)); +#422180 = DIRECTION('',(0.,0.,1.)); +#422181 = DIRECTION('',(1.,0.,-0.)); +#422182 = ADVANCED_FACE('',(#422183,#422186),#422197,.T.); +#422183 = FACE_BOUND('',#422184,.T.); +#422184 = EDGE_LOOP('',(#422185)); +#422185 = ORIENTED_EDGE('',*,*,#422143,.T.); +#422186 = FACE_BOUND('',#422187,.T.); +#422187 = EDGE_LOOP('',(#422188)); +#422188 = ORIENTED_EDGE('',*,*,#422189,.T.); +#422189 = EDGE_CURVE('',#422190,#422190,#422192,.T.); +#422190 = VERTEX_POINT('',#422191); +#422191 = CARTESIAN_POINT('',(136.999999,-122.221015,1.545)); +#422192 = CIRCLE('',#422193,0.125); +#422193 = AXIS2_PLACEMENT_3D('',#422194,#422195,#422196); +#422194 = CARTESIAN_POINT('',(136.999999,-122.096015,1.545)); +#422195 = DIRECTION('',(-0.,0.,-1.)); +#422196 = DIRECTION('',(-0.,-1.,0.)); +#422197 = PLANE('',#422198); +#422198 = AXIS2_PLACEMENT_3D('',#422199,#422200,#422201); +#422199 = CARTESIAN_POINT('',(136.999999,-122.246015,1.545)); +#422200 = DIRECTION('',(0.,0.,1.)); +#422201 = DIRECTION('',(1.,0.,-0.)); +#422202 = ADVANCED_FACE('',(#422203),#422214,.F.); +#422203 = FACE_BOUND('',#422204,.T.); +#422204 = EDGE_LOOP('',(#422205,#422206,#422212,#422213)); +#422205 = ORIENTED_EDGE('',*,*,#422169,.T.); +#422206 = ORIENTED_EDGE('',*,*,#422207,.T.); +#422207 = EDGE_CURVE('',#422170,#422190,#422208,.T.); +#422208 = LINE('',#422209,#422210); +#422209 = CARTESIAN_POINT('',(136.999999,-122.221015,-3.6E-02)); +#422210 = VECTOR('',#422211,1.); +#422211 = DIRECTION('',(0.,0.,1.)); +#422212 = ORIENTED_EDGE('',*,*,#422189,.F.); +#422213 = ORIENTED_EDGE('',*,*,#422207,.F.); +#422214 = CYLINDRICAL_SURFACE('',#422215,0.125); +#422215 = AXIS2_PLACEMENT_3D('',#422216,#422217,#422218); +#422216 = CARTESIAN_POINT('',(136.999999,-122.096015,-3.6E-02)); +#422217 = DIRECTION('',(-0.,-0.,-1.)); +#422218 = DIRECTION('',(-0.,-1.,0.)); +#422219 = MANIFOLD_SOLID_BREP('',#422220); +#422220 = CLOSED_SHELL('',(#422221,#422254,#422274,#422294)); +#422221 = ADVANCED_FACE('',(#422222),#422249,.T.); +#422222 = FACE_BOUND('',#422223,.F.); +#422223 = EDGE_LOOP('',(#422224,#422234,#422241,#422242)); +#422224 = ORIENTED_EDGE('',*,*,#422225,.T.); +#422225 = EDGE_CURVE('',#422226,#422228,#422230,.T.); +#422226 = VERTEX_POINT('',#422227); +#422227 = CARTESIAN_POINT('',(136.4,-80.25,-3.5E-02)); +#422228 = VERTEX_POINT('',#422229); +#422229 = CARTESIAN_POINT('',(136.4,-80.25,1.545)); +#422230 = LINE('',#422231,#422232); +#422231 = CARTESIAN_POINT('',(136.4,-80.25,-3.5E-02)); +#422232 = VECTOR('',#422233,1.); +#422233 = DIRECTION('',(0.,0.,1.)); +#422234 = ORIENTED_EDGE('',*,*,#422235,.T.); +#422235 = EDGE_CURVE('',#422228,#422228,#422236,.T.); +#422236 = CIRCLE('',#422237,0.15); +#422237 = AXIS2_PLACEMENT_3D('',#422238,#422239,#422240); +#422238 = CARTESIAN_POINT('',(136.4,-80.1,1.545)); +#422239 = DIRECTION('',(0.,0.,1.)); +#422240 = DIRECTION('',(-0.,-1.,0.)); +#422241 = ORIENTED_EDGE('',*,*,#422225,.F.); +#422242 = ORIENTED_EDGE('',*,*,#422243,.F.); +#422243 = EDGE_CURVE('',#422226,#422226,#422244,.T.); +#422244 = CIRCLE('',#422245,0.15); +#422245 = AXIS2_PLACEMENT_3D('',#422246,#422247,#422248); +#422246 = CARTESIAN_POINT('',(136.4,-80.1,-3.5E-02)); +#422247 = DIRECTION('',(0.,0.,1.)); +#422248 = DIRECTION('',(-0.,-1.,0.)); +#422249 = CYLINDRICAL_SURFACE('',#422250,0.15); +#422250 = AXIS2_PLACEMENT_3D('',#422251,#422252,#422253); +#422251 = CARTESIAN_POINT('',(136.4,-80.1,-3.5E-02)); +#422252 = DIRECTION('',(-0.,-0.,-1.)); +#422253 = DIRECTION('',(-0.,-1.,0.)); +#422254 = ADVANCED_FACE('',(#422255,#422258),#422269,.F.); +#422255 = FACE_BOUND('',#422256,.F.); +#422256 = EDGE_LOOP('',(#422257)); +#422257 = ORIENTED_EDGE('',*,*,#422243,.T.); +#422258 = FACE_BOUND('',#422259,.F.); +#422259 = EDGE_LOOP('',(#422260)); +#422260 = ORIENTED_EDGE('',*,*,#422261,.T.); +#422261 = EDGE_CURVE('',#422262,#422262,#422264,.T.); +#422262 = VERTEX_POINT('',#422263); +#422263 = CARTESIAN_POINT('',(136.4,-80.225,-3.5E-02)); +#422264 = CIRCLE('',#422265,0.125); +#422265 = AXIS2_PLACEMENT_3D('',#422266,#422267,#422268); +#422266 = CARTESIAN_POINT('',(136.4,-80.1,-3.5E-02)); +#422267 = DIRECTION('',(-0.,0.,-1.)); +#422268 = DIRECTION('',(-0.,-1.,0.)); +#422269 = PLANE('',#422270); +#422270 = AXIS2_PLACEMENT_3D('',#422271,#422272,#422273); +#422271 = CARTESIAN_POINT('',(136.4,-80.25,-3.5E-02)); +#422272 = DIRECTION('',(0.,0.,1.)); +#422273 = DIRECTION('',(1.,0.,-0.)); +#422274 = ADVANCED_FACE('',(#422275,#422278),#422289,.T.); +#422275 = FACE_BOUND('',#422276,.T.); +#422276 = EDGE_LOOP('',(#422277)); +#422277 = ORIENTED_EDGE('',*,*,#422235,.T.); +#422278 = FACE_BOUND('',#422279,.T.); +#422279 = EDGE_LOOP('',(#422280)); +#422280 = ORIENTED_EDGE('',*,*,#422281,.T.); +#422281 = EDGE_CURVE('',#422282,#422282,#422284,.T.); +#422282 = VERTEX_POINT('',#422283); +#422283 = CARTESIAN_POINT('',(136.4,-80.225,1.545)); +#422284 = CIRCLE('',#422285,0.125); +#422285 = AXIS2_PLACEMENT_3D('',#422286,#422287,#422288); +#422286 = CARTESIAN_POINT('',(136.4,-80.1,1.545)); +#422287 = DIRECTION('',(-0.,0.,-1.)); +#422288 = DIRECTION('',(-0.,-1.,0.)); +#422289 = PLANE('',#422290); +#422290 = AXIS2_PLACEMENT_3D('',#422291,#422292,#422293); +#422291 = CARTESIAN_POINT('',(136.4,-80.25,1.545)); +#422292 = DIRECTION('',(0.,0.,1.)); +#422293 = DIRECTION('',(1.,0.,-0.)); +#422294 = ADVANCED_FACE('',(#422295),#422306,.F.); +#422295 = FACE_BOUND('',#422296,.T.); +#422296 = EDGE_LOOP('',(#422297,#422298,#422304,#422305)); +#422297 = ORIENTED_EDGE('',*,*,#422261,.T.); +#422298 = ORIENTED_EDGE('',*,*,#422299,.T.); +#422299 = EDGE_CURVE('',#422262,#422282,#422300,.T.); +#422300 = LINE('',#422301,#422302); +#422301 = CARTESIAN_POINT('',(136.4,-80.225,-3.6E-02)); +#422302 = VECTOR('',#422303,1.); +#422303 = DIRECTION('',(0.,0.,1.)); +#422304 = ORIENTED_EDGE('',*,*,#422281,.F.); +#422305 = ORIENTED_EDGE('',*,*,#422299,.F.); +#422306 = CYLINDRICAL_SURFACE('',#422307,0.125); +#422307 = AXIS2_PLACEMENT_3D('',#422308,#422309,#422310); +#422308 = CARTESIAN_POINT('',(136.4,-80.1,-3.6E-02)); +#422309 = DIRECTION('',(-0.,-0.,-1.)); +#422310 = DIRECTION('',(-0.,-1.,0.)); +#422311 = MANIFOLD_SOLID_BREP('',#422312); +#422312 = CLOSED_SHELL('',(#422313,#422346,#422366,#422386)); +#422313 = ADVANCED_FACE('',(#422314),#422341,.T.); +#422314 = FACE_BOUND('',#422315,.F.); +#422315 = EDGE_LOOP('',(#422316,#422326,#422333,#422334)); +#422316 = ORIENTED_EDGE('',*,*,#422317,.T.); +#422317 = EDGE_CURVE('',#422318,#422320,#422322,.T.); +#422318 = VERTEX_POINT('',#422319); +#422319 = CARTESIAN_POINT('',(137.5,-81.15,-3.5E-02)); +#422320 = VERTEX_POINT('',#422321); +#422321 = CARTESIAN_POINT('',(137.5,-81.15,1.545)); +#422322 = LINE('',#422323,#422324); +#422323 = CARTESIAN_POINT('',(137.5,-81.15,-3.5E-02)); +#422324 = VECTOR('',#422325,1.); +#422325 = DIRECTION('',(0.,0.,1.)); +#422326 = ORIENTED_EDGE('',*,*,#422327,.T.); +#422327 = EDGE_CURVE('',#422320,#422320,#422328,.T.); +#422328 = CIRCLE('',#422329,0.15); +#422329 = AXIS2_PLACEMENT_3D('',#422330,#422331,#422332); +#422330 = CARTESIAN_POINT('',(137.5,-81.,1.545)); +#422331 = DIRECTION('',(0.,0.,1.)); +#422332 = DIRECTION('',(-0.,-1.,0.)); +#422333 = ORIENTED_EDGE('',*,*,#422317,.F.); +#422334 = ORIENTED_EDGE('',*,*,#422335,.F.); +#422335 = EDGE_CURVE('',#422318,#422318,#422336,.T.); +#422336 = CIRCLE('',#422337,0.15); +#422337 = AXIS2_PLACEMENT_3D('',#422338,#422339,#422340); +#422338 = CARTESIAN_POINT('',(137.5,-81.,-3.5E-02)); +#422339 = DIRECTION('',(0.,0.,1.)); +#422340 = DIRECTION('',(-0.,-1.,0.)); +#422341 = CYLINDRICAL_SURFACE('',#422342,0.15); +#422342 = AXIS2_PLACEMENT_3D('',#422343,#422344,#422345); +#422343 = CARTESIAN_POINT('',(137.5,-81.,-3.5E-02)); +#422344 = DIRECTION('',(-0.,-0.,-1.)); +#422345 = DIRECTION('',(-0.,-1.,0.)); +#422346 = ADVANCED_FACE('',(#422347,#422350),#422361,.F.); +#422347 = FACE_BOUND('',#422348,.F.); +#422348 = EDGE_LOOP('',(#422349)); +#422349 = ORIENTED_EDGE('',*,*,#422335,.T.); +#422350 = FACE_BOUND('',#422351,.F.); +#422351 = EDGE_LOOP('',(#422352)); +#422352 = ORIENTED_EDGE('',*,*,#422353,.T.); +#422353 = EDGE_CURVE('',#422354,#422354,#422356,.T.); +#422354 = VERTEX_POINT('',#422355); +#422355 = CARTESIAN_POINT('',(137.5,-81.125,-3.5E-02)); +#422356 = CIRCLE('',#422357,0.125); +#422357 = AXIS2_PLACEMENT_3D('',#422358,#422359,#422360); +#422358 = CARTESIAN_POINT('',(137.5,-81.,-3.5E-02)); +#422359 = DIRECTION('',(-0.,0.,-1.)); +#422360 = DIRECTION('',(-0.,-1.,0.)); +#422361 = PLANE('',#422362); +#422362 = AXIS2_PLACEMENT_3D('',#422363,#422364,#422365); +#422363 = CARTESIAN_POINT('',(137.5,-81.15,-3.5E-02)); +#422364 = DIRECTION('',(0.,0.,1.)); +#422365 = DIRECTION('',(1.,0.,-0.)); +#422366 = ADVANCED_FACE('',(#422367,#422370),#422381,.T.); +#422367 = FACE_BOUND('',#422368,.T.); +#422368 = EDGE_LOOP('',(#422369)); +#422369 = ORIENTED_EDGE('',*,*,#422327,.T.); +#422370 = FACE_BOUND('',#422371,.T.); +#422371 = EDGE_LOOP('',(#422372)); +#422372 = ORIENTED_EDGE('',*,*,#422373,.T.); +#422373 = EDGE_CURVE('',#422374,#422374,#422376,.T.); +#422374 = VERTEX_POINT('',#422375); +#422375 = CARTESIAN_POINT('',(137.5,-81.125,1.545)); +#422376 = CIRCLE('',#422377,0.125); +#422377 = AXIS2_PLACEMENT_3D('',#422378,#422379,#422380); +#422378 = CARTESIAN_POINT('',(137.5,-81.,1.545)); +#422379 = DIRECTION('',(-0.,0.,-1.)); +#422380 = DIRECTION('',(-0.,-1.,0.)); +#422381 = PLANE('',#422382); +#422382 = AXIS2_PLACEMENT_3D('',#422383,#422384,#422385); +#422383 = CARTESIAN_POINT('',(137.5,-81.15,1.545)); +#422384 = DIRECTION('',(0.,0.,1.)); +#422385 = DIRECTION('',(1.,0.,-0.)); +#422386 = ADVANCED_FACE('',(#422387),#422398,.F.); +#422387 = FACE_BOUND('',#422388,.T.); +#422388 = EDGE_LOOP('',(#422389,#422390,#422396,#422397)); +#422389 = ORIENTED_EDGE('',*,*,#422353,.T.); +#422390 = ORIENTED_EDGE('',*,*,#422391,.T.); +#422391 = EDGE_CURVE('',#422354,#422374,#422392,.T.); +#422392 = LINE('',#422393,#422394); +#422393 = CARTESIAN_POINT('',(137.5,-81.125,-3.6E-02)); +#422394 = VECTOR('',#422395,1.); +#422395 = DIRECTION('',(0.,0.,1.)); +#422396 = ORIENTED_EDGE('',*,*,#422373,.F.); +#422397 = ORIENTED_EDGE('',*,*,#422391,.F.); +#422398 = CYLINDRICAL_SURFACE('',#422399,0.125); +#422399 = AXIS2_PLACEMENT_3D('',#422400,#422401,#422402); +#422400 = CARTESIAN_POINT('',(137.5,-81.,-3.6E-02)); +#422401 = DIRECTION('',(-0.,-0.,-1.)); +#422402 = DIRECTION('',(-0.,-1.,0.)); +#422403 = MANIFOLD_SOLID_BREP('',#422404); +#422404 = CLOSED_SHELL('',(#422405,#422438,#422458,#422478)); +#422405 = ADVANCED_FACE('',(#422406),#422433,.T.); +#422406 = FACE_BOUND('',#422407,.F.); +#422407 = EDGE_LOOP('',(#422408,#422418,#422425,#422426)); +#422408 = ORIENTED_EDGE('',*,*,#422409,.T.); +#422409 = EDGE_CURVE('',#422410,#422412,#422414,.T.); +#422410 = VERTEX_POINT('',#422411); +#422411 = CARTESIAN_POINT('',(134.8,-80.902983,-3.5E-02)); +#422412 = VERTEX_POINT('',#422413); +#422413 = CARTESIAN_POINT('',(134.8,-80.902983,1.545)); +#422414 = LINE('',#422415,#422416); +#422415 = CARTESIAN_POINT('',(134.8,-80.902983,-3.5E-02)); +#422416 = VECTOR('',#422417,1.); +#422417 = DIRECTION('',(0.,0.,1.)); +#422418 = ORIENTED_EDGE('',*,*,#422419,.T.); +#422419 = EDGE_CURVE('',#422412,#422412,#422420,.T.); +#422420 = CIRCLE('',#422421,0.15); +#422421 = AXIS2_PLACEMENT_3D('',#422422,#422423,#422424); +#422422 = CARTESIAN_POINT('',(134.8,-80.752983,1.545)); +#422423 = DIRECTION('',(0.,0.,1.)); +#422424 = DIRECTION('',(-0.,-1.,0.)); +#422425 = ORIENTED_EDGE('',*,*,#422409,.F.); +#422426 = ORIENTED_EDGE('',*,*,#422427,.F.); +#422427 = EDGE_CURVE('',#422410,#422410,#422428,.T.); +#422428 = CIRCLE('',#422429,0.15); +#422429 = AXIS2_PLACEMENT_3D('',#422430,#422431,#422432); +#422430 = CARTESIAN_POINT('',(134.8,-80.752983,-3.5E-02)); +#422431 = DIRECTION('',(0.,0.,1.)); +#422432 = DIRECTION('',(-0.,-1.,0.)); +#422433 = CYLINDRICAL_SURFACE('',#422434,0.15); +#422434 = AXIS2_PLACEMENT_3D('',#422435,#422436,#422437); +#422435 = CARTESIAN_POINT('',(134.8,-80.752983,-3.5E-02)); +#422436 = DIRECTION('',(-0.,-0.,-1.)); +#422437 = DIRECTION('',(-0.,-1.,0.)); +#422438 = ADVANCED_FACE('',(#422439,#422442),#422453,.F.); +#422439 = FACE_BOUND('',#422440,.F.); +#422440 = EDGE_LOOP('',(#422441)); +#422441 = ORIENTED_EDGE('',*,*,#422427,.T.); +#422442 = FACE_BOUND('',#422443,.F.); +#422443 = EDGE_LOOP('',(#422444)); +#422444 = ORIENTED_EDGE('',*,*,#422445,.T.); +#422445 = EDGE_CURVE('',#422446,#422446,#422448,.T.); +#422446 = VERTEX_POINT('',#422447); +#422447 = CARTESIAN_POINT('',(134.8,-80.877983,-3.5E-02)); +#422448 = CIRCLE('',#422449,0.125); +#422449 = AXIS2_PLACEMENT_3D('',#422450,#422451,#422452); +#422450 = CARTESIAN_POINT('',(134.8,-80.752983,-3.5E-02)); +#422451 = DIRECTION('',(-0.,0.,-1.)); +#422452 = DIRECTION('',(-0.,-1.,0.)); +#422453 = PLANE('',#422454); +#422454 = AXIS2_PLACEMENT_3D('',#422455,#422456,#422457); +#422455 = CARTESIAN_POINT('',(134.8,-80.902983,-3.5E-02)); +#422456 = DIRECTION('',(0.,0.,1.)); +#422457 = DIRECTION('',(1.,0.,-0.)); +#422458 = ADVANCED_FACE('',(#422459,#422462),#422473,.T.); +#422459 = FACE_BOUND('',#422460,.T.); +#422460 = EDGE_LOOP('',(#422461)); +#422461 = ORIENTED_EDGE('',*,*,#422419,.T.); +#422462 = FACE_BOUND('',#422463,.T.); +#422463 = EDGE_LOOP('',(#422464)); +#422464 = ORIENTED_EDGE('',*,*,#422465,.T.); +#422465 = EDGE_CURVE('',#422466,#422466,#422468,.T.); +#422466 = VERTEX_POINT('',#422467); +#422467 = CARTESIAN_POINT('',(134.8,-80.877983,1.545)); +#422468 = CIRCLE('',#422469,0.125); +#422469 = AXIS2_PLACEMENT_3D('',#422470,#422471,#422472); +#422470 = CARTESIAN_POINT('',(134.8,-80.752983,1.545)); +#422471 = DIRECTION('',(-0.,0.,-1.)); +#422472 = DIRECTION('',(-0.,-1.,0.)); +#422473 = PLANE('',#422474); +#422474 = AXIS2_PLACEMENT_3D('',#422475,#422476,#422477); +#422475 = CARTESIAN_POINT('',(134.8,-80.902983,1.545)); +#422476 = DIRECTION('',(0.,0.,1.)); +#422477 = DIRECTION('',(1.,0.,-0.)); +#422478 = ADVANCED_FACE('',(#422479),#422490,.F.); +#422479 = FACE_BOUND('',#422480,.T.); +#422480 = EDGE_LOOP('',(#422481,#422482,#422488,#422489)); +#422481 = ORIENTED_EDGE('',*,*,#422445,.T.); +#422482 = ORIENTED_EDGE('',*,*,#422483,.T.); +#422483 = EDGE_CURVE('',#422446,#422466,#422484,.T.); +#422484 = LINE('',#422485,#422486); +#422485 = CARTESIAN_POINT('',(134.8,-80.877983,-3.6E-02)); +#422486 = VECTOR('',#422487,1.); +#422487 = DIRECTION('',(0.,0.,1.)); +#422488 = ORIENTED_EDGE('',*,*,#422465,.F.); +#422489 = ORIENTED_EDGE('',*,*,#422483,.F.); +#422490 = CYLINDRICAL_SURFACE('',#422491,0.125); +#422491 = AXIS2_PLACEMENT_3D('',#422492,#422493,#422494); +#422492 = CARTESIAN_POINT('',(134.8,-80.752983,-3.6E-02)); +#422493 = DIRECTION('',(-0.,-0.,-1.)); +#422494 = DIRECTION('',(-0.,-1.,0.)); +#422495 = MANIFOLD_SOLID_BREP('',#422496); +#422496 = CLOSED_SHELL('',(#422497,#422530,#422550,#422570)); +#422497 = ADVANCED_FACE('',(#422498),#422525,.T.); +#422498 = FACE_BOUND('',#422499,.F.); +#422499 = EDGE_LOOP('',(#422500,#422510,#422517,#422518)); +#422500 = ORIENTED_EDGE('',*,*,#422501,.T.); +#422501 = EDGE_CURVE('',#422502,#422504,#422506,.T.); +#422502 = VERTEX_POINT('',#422503); +#422503 = CARTESIAN_POINT('',(125.7,-73.65,-3.5E-02)); +#422504 = VERTEX_POINT('',#422505); +#422505 = CARTESIAN_POINT('',(125.7,-73.65,1.545)); +#422506 = LINE('',#422507,#422508); +#422507 = CARTESIAN_POINT('',(125.7,-73.65,-3.5E-02)); +#422508 = VECTOR('',#422509,1.); +#422509 = DIRECTION('',(0.,0.,1.)); +#422510 = ORIENTED_EDGE('',*,*,#422511,.T.); +#422511 = EDGE_CURVE('',#422504,#422504,#422512,.T.); +#422512 = CIRCLE('',#422513,0.15); +#422513 = AXIS2_PLACEMENT_3D('',#422514,#422515,#422516); +#422514 = CARTESIAN_POINT('',(125.7,-73.5,1.545)); +#422515 = DIRECTION('',(0.,-0.,1.)); +#422516 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#422517 = ORIENTED_EDGE('',*,*,#422501,.F.); +#422518 = ORIENTED_EDGE('',*,*,#422519,.F.); +#422519 = EDGE_CURVE('',#422502,#422502,#422520,.T.); +#422520 = CIRCLE('',#422521,0.15); +#422521 = AXIS2_PLACEMENT_3D('',#422522,#422523,#422524); +#422522 = CARTESIAN_POINT('',(125.7,-73.5,-3.5E-02)); +#422523 = DIRECTION('',(0.,-0.,1.)); +#422524 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#422525 = CYLINDRICAL_SURFACE('',#422526,0.15); +#422526 = AXIS2_PLACEMENT_3D('',#422527,#422528,#422529); +#422527 = CARTESIAN_POINT('',(125.7,-73.5,-3.5E-02)); +#422528 = DIRECTION('',(-0.,0.,-1.)); +#422529 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#422530 = ADVANCED_FACE('',(#422531,#422534),#422545,.F.); +#422531 = FACE_BOUND('',#422532,.F.); +#422532 = EDGE_LOOP('',(#422533)); +#422533 = ORIENTED_EDGE('',*,*,#422519,.T.); +#422534 = FACE_BOUND('',#422535,.F.); +#422535 = EDGE_LOOP('',(#422536)); +#422536 = ORIENTED_EDGE('',*,*,#422537,.T.); +#422537 = EDGE_CURVE('',#422538,#422538,#422540,.T.); +#422538 = VERTEX_POINT('',#422539); +#422539 = CARTESIAN_POINT('',(125.7,-73.625,-3.5E-02)); +#422540 = CIRCLE('',#422541,0.125); +#422541 = AXIS2_PLACEMENT_3D('',#422542,#422543,#422544); +#422542 = CARTESIAN_POINT('',(125.7,-73.5,-3.5E-02)); +#422543 = DIRECTION('',(-0.,0.,-1.)); +#422544 = DIRECTION('',(-0.,-1.,0.)); +#422545 = PLANE('',#422546); +#422546 = AXIS2_PLACEMENT_3D('',#422547,#422548,#422549); +#422547 = CARTESIAN_POINT('',(125.7,-73.65,-3.5E-02)); +#422548 = DIRECTION('',(0.,0.,1.)); +#422549 = DIRECTION('',(1.,0.,-0.)); +#422550 = ADVANCED_FACE('',(#422551,#422554),#422565,.T.); +#422551 = FACE_BOUND('',#422552,.T.); +#422552 = EDGE_LOOP('',(#422553)); +#422553 = ORIENTED_EDGE('',*,*,#422511,.T.); +#422554 = FACE_BOUND('',#422555,.T.); +#422555 = EDGE_LOOP('',(#422556)); +#422556 = ORIENTED_EDGE('',*,*,#422557,.T.); +#422557 = EDGE_CURVE('',#422558,#422558,#422560,.T.); +#422558 = VERTEX_POINT('',#422559); +#422559 = CARTESIAN_POINT('',(125.7,-73.625,1.545)); +#422560 = CIRCLE('',#422561,0.125); +#422561 = AXIS2_PLACEMENT_3D('',#422562,#422563,#422564); +#422562 = CARTESIAN_POINT('',(125.7,-73.5,1.545)); +#422563 = DIRECTION('',(-0.,0.,-1.)); +#422564 = DIRECTION('',(-0.,-1.,0.)); +#422565 = PLANE('',#422566); +#422566 = AXIS2_PLACEMENT_3D('',#422567,#422568,#422569); +#422567 = CARTESIAN_POINT('',(125.7,-73.65,1.545)); +#422568 = DIRECTION('',(0.,0.,1.)); +#422569 = DIRECTION('',(1.,0.,-0.)); +#422570 = ADVANCED_FACE('',(#422571),#422582,.F.); +#422571 = FACE_BOUND('',#422572,.T.); +#422572 = EDGE_LOOP('',(#422573,#422574,#422580,#422581)); +#422573 = ORIENTED_EDGE('',*,*,#422537,.T.); +#422574 = ORIENTED_EDGE('',*,*,#422575,.T.); +#422575 = EDGE_CURVE('',#422538,#422558,#422576,.T.); +#422576 = LINE('',#422577,#422578); +#422577 = CARTESIAN_POINT('',(125.7,-73.625,-3.6E-02)); +#422578 = VECTOR('',#422579,1.); +#422579 = DIRECTION('',(0.,0.,1.)); +#422580 = ORIENTED_EDGE('',*,*,#422557,.F.); +#422581 = ORIENTED_EDGE('',*,*,#422575,.F.); +#422582 = CYLINDRICAL_SURFACE('',#422583,0.125); +#422583 = AXIS2_PLACEMENT_3D('',#422584,#422585,#422586); +#422584 = CARTESIAN_POINT('',(125.7,-73.5,-3.6E-02)); +#422585 = DIRECTION('',(-0.,-0.,-1.)); +#422586 = DIRECTION('',(-0.,-1.,0.)); +#422587 = MANIFOLD_SOLID_BREP('',#422588); +#422588 = CLOSED_SHELL('',(#422589,#422622,#422642,#422662)); +#422589 = ADVANCED_FACE('',(#422590),#422617,.T.); +#422590 = FACE_BOUND('',#422591,.F.); +#422591 = EDGE_LOOP('',(#422592,#422602,#422609,#422610)); +#422592 = ORIENTED_EDGE('',*,*,#422593,.T.); +#422593 = EDGE_CURVE('',#422594,#422596,#422598,.T.); +#422594 = VERTEX_POINT('',#422595); +#422595 = CARTESIAN_POINT('',(126.758949,-84.15,-3.5E-02)); +#422596 = VERTEX_POINT('',#422597); +#422597 = CARTESIAN_POINT('',(126.758949,-84.15,1.545)); +#422598 = LINE('',#422599,#422600); +#422599 = CARTESIAN_POINT('',(126.758949,-84.15,-3.5E-02)); +#422600 = VECTOR('',#422601,1.); +#422601 = DIRECTION('',(0.,0.,1.)); +#422602 = ORIENTED_EDGE('',*,*,#422603,.T.); +#422603 = EDGE_CURVE('',#422596,#422596,#422604,.T.); +#422604 = CIRCLE('',#422605,0.15); +#422605 = AXIS2_PLACEMENT_3D('',#422606,#422607,#422608); +#422606 = CARTESIAN_POINT('',(126.758949,-84.,1.545)); +#422607 = DIRECTION('',(0.,0.,1.)); +#422608 = DIRECTION('',(-0.,-1.,0.)); +#422609 = ORIENTED_EDGE('',*,*,#422593,.F.); +#422610 = ORIENTED_EDGE('',*,*,#422611,.F.); +#422611 = EDGE_CURVE('',#422594,#422594,#422612,.T.); +#422612 = CIRCLE('',#422613,0.15); +#422613 = AXIS2_PLACEMENT_3D('',#422614,#422615,#422616); +#422614 = CARTESIAN_POINT('',(126.758949,-84.,-3.5E-02)); +#422615 = DIRECTION('',(0.,0.,1.)); +#422616 = DIRECTION('',(-0.,-1.,0.)); +#422617 = CYLINDRICAL_SURFACE('',#422618,0.15); +#422618 = AXIS2_PLACEMENT_3D('',#422619,#422620,#422621); +#422619 = CARTESIAN_POINT('',(126.758949,-84.,-3.5E-02)); +#422620 = DIRECTION('',(-0.,-0.,-1.)); +#422621 = DIRECTION('',(-0.,-1.,0.)); +#422622 = ADVANCED_FACE('',(#422623,#422626),#422637,.F.); +#422623 = FACE_BOUND('',#422624,.F.); +#422624 = EDGE_LOOP('',(#422625)); +#422625 = ORIENTED_EDGE('',*,*,#422611,.T.); +#422626 = FACE_BOUND('',#422627,.F.); +#422627 = EDGE_LOOP('',(#422628)); +#422628 = ORIENTED_EDGE('',*,*,#422629,.T.); +#422629 = EDGE_CURVE('',#422630,#422630,#422632,.T.); +#422630 = VERTEX_POINT('',#422631); +#422631 = CARTESIAN_POINT('',(126.758949,-84.125,-3.5E-02)); +#422632 = CIRCLE('',#422633,0.125); +#422633 = AXIS2_PLACEMENT_3D('',#422634,#422635,#422636); +#422634 = CARTESIAN_POINT('',(126.758949,-84.,-3.5E-02)); +#422635 = DIRECTION('',(-0.,0.,-1.)); +#422636 = DIRECTION('',(-0.,-1.,0.)); +#422637 = PLANE('',#422638); +#422638 = AXIS2_PLACEMENT_3D('',#422639,#422640,#422641); +#422639 = CARTESIAN_POINT('',(126.758949,-84.15,-3.5E-02)); +#422640 = DIRECTION('',(0.,0.,1.)); +#422641 = DIRECTION('',(1.,0.,-0.)); +#422642 = ADVANCED_FACE('',(#422643,#422646),#422657,.T.); +#422643 = FACE_BOUND('',#422644,.T.); +#422644 = EDGE_LOOP('',(#422645)); +#422645 = ORIENTED_EDGE('',*,*,#422603,.T.); +#422646 = FACE_BOUND('',#422647,.T.); +#422647 = EDGE_LOOP('',(#422648)); +#422648 = ORIENTED_EDGE('',*,*,#422649,.T.); +#422649 = EDGE_CURVE('',#422650,#422650,#422652,.T.); +#422650 = VERTEX_POINT('',#422651); +#422651 = CARTESIAN_POINT('',(126.758949,-84.125,1.545)); +#422652 = CIRCLE('',#422653,0.125); +#422653 = AXIS2_PLACEMENT_3D('',#422654,#422655,#422656); +#422654 = CARTESIAN_POINT('',(126.758949,-84.,1.545)); +#422655 = DIRECTION('',(-0.,0.,-1.)); +#422656 = DIRECTION('',(-0.,-1.,0.)); +#422657 = PLANE('',#422658); +#422658 = AXIS2_PLACEMENT_3D('',#422659,#422660,#422661); +#422659 = CARTESIAN_POINT('',(126.758949,-84.15,1.545)); +#422660 = DIRECTION('',(0.,0.,1.)); +#422661 = DIRECTION('',(1.,0.,-0.)); +#422662 = ADVANCED_FACE('',(#422663),#422674,.F.); +#422663 = FACE_BOUND('',#422664,.T.); +#422664 = EDGE_LOOP('',(#422665,#422666,#422672,#422673)); +#422665 = ORIENTED_EDGE('',*,*,#422629,.T.); +#422666 = ORIENTED_EDGE('',*,*,#422667,.T.); +#422667 = EDGE_CURVE('',#422630,#422650,#422668,.T.); +#422668 = LINE('',#422669,#422670); +#422669 = CARTESIAN_POINT('',(126.758949,-84.125,-3.6E-02)); +#422670 = VECTOR('',#422671,1.); +#422671 = DIRECTION('',(0.,0.,1.)); +#422672 = ORIENTED_EDGE('',*,*,#422649,.F.); +#422673 = ORIENTED_EDGE('',*,*,#422667,.F.); +#422674 = CYLINDRICAL_SURFACE('',#422675,0.125); +#422675 = AXIS2_PLACEMENT_3D('',#422676,#422677,#422678); +#422676 = CARTESIAN_POINT('',(126.758949,-84.,-3.6E-02)); +#422677 = DIRECTION('',(-0.,-0.,-1.)); +#422678 = DIRECTION('',(-0.,-1.,0.)); +#422679 = MANIFOLD_SOLID_BREP('',#422680); +#422680 = CLOSED_SHELL('',(#422681,#422714,#422734,#422754)); +#422681 = ADVANCED_FACE('',(#422682),#422709,.T.); +#422682 = FACE_BOUND('',#422683,.F.); +#422683 = EDGE_LOOP('',(#422684,#422694,#422701,#422702)); +#422684 = ORIENTED_EDGE('',*,*,#422685,.T.); +#422685 = EDGE_CURVE('',#422686,#422688,#422690,.T.); +#422686 = VERTEX_POINT('',#422687); +#422687 = CARTESIAN_POINT('',(128.,-140.35,-3.5E-02)); +#422688 = VERTEX_POINT('',#422689); +#422689 = CARTESIAN_POINT('',(128.,-140.35,1.545)); +#422690 = LINE('',#422691,#422692); +#422691 = CARTESIAN_POINT('',(128.,-140.35,-3.5E-02)); +#422692 = VECTOR('',#422693,1.); +#422693 = DIRECTION('',(0.,0.,1.)); +#422694 = ORIENTED_EDGE('',*,*,#422695,.T.); +#422695 = EDGE_CURVE('',#422688,#422688,#422696,.T.); +#422696 = CIRCLE('',#422697,0.15); +#422697 = AXIS2_PLACEMENT_3D('',#422698,#422699,#422700); +#422698 = CARTESIAN_POINT('',(128.,-140.2,1.545)); +#422699 = DIRECTION('',(0.,0.,1.)); +#422700 = DIRECTION('',(-0.,-1.,0.)); +#422701 = ORIENTED_EDGE('',*,*,#422685,.F.); +#422702 = ORIENTED_EDGE('',*,*,#422703,.F.); +#422703 = EDGE_CURVE('',#422686,#422686,#422704,.T.); +#422704 = CIRCLE('',#422705,0.15); +#422705 = AXIS2_PLACEMENT_3D('',#422706,#422707,#422708); +#422706 = CARTESIAN_POINT('',(128.,-140.2,-3.5E-02)); +#422707 = DIRECTION('',(0.,0.,1.)); +#422708 = DIRECTION('',(-0.,-1.,0.)); +#422709 = CYLINDRICAL_SURFACE('',#422710,0.15); +#422710 = AXIS2_PLACEMENT_3D('',#422711,#422712,#422713); +#422711 = CARTESIAN_POINT('',(128.,-140.2,-3.5E-02)); +#422712 = DIRECTION('',(-0.,-0.,-1.)); +#422713 = DIRECTION('',(-0.,-1.,0.)); +#422714 = ADVANCED_FACE('',(#422715,#422718),#422729,.F.); +#422715 = FACE_BOUND('',#422716,.F.); +#422716 = EDGE_LOOP('',(#422717)); +#422717 = ORIENTED_EDGE('',*,*,#422703,.T.); +#422718 = FACE_BOUND('',#422719,.F.); +#422719 = EDGE_LOOP('',(#422720)); +#422720 = ORIENTED_EDGE('',*,*,#422721,.T.); +#422721 = EDGE_CURVE('',#422722,#422722,#422724,.T.); +#422722 = VERTEX_POINT('',#422723); +#422723 = CARTESIAN_POINT('',(128.,-140.325,-3.5E-02)); +#422724 = CIRCLE('',#422725,0.125); +#422725 = AXIS2_PLACEMENT_3D('',#422726,#422727,#422728); +#422726 = CARTESIAN_POINT('',(128.,-140.2,-3.5E-02)); +#422727 = DIRECTION('',(-0.,0.,-1.)); +#422728 = DIRECTION('',(-0.,-1.,0.)); +#422729 = PLANE('',#422730); +#422730 = AXIS2_PLACEMENT_3D('',#422731,#422732,#422733); +#422731 = CARTESIAN_POINT('',(128.,-140.35,-3.5E-02)); +#422732 = DIRECTION('',(0.,0.,1.)); +#422733 = DIRECTION('',(1.,0.,-0.)); +#422734 = ADVANCED_FACE('',(#422735,#422738),#422749,.T.); +#422735 = FACE_BOUND('',#422736,.T.); +#422736 = EDGE_LOOP('',(#422737)); +#422737 = ORIENTED_EDGE('',*,*,#422695,.T.); +#422738 = FACE_BOUND('',#422739,.T.); +#422739 = EDGE_LOOP('',(#422740)); +#422740 = ORIENTED_EDGE('',*,*,#422741,.T.); +#422741 = EDGE_CURVE('',#422742,#422742,#422744,.T.); +#422742 = VERTEX_POINT('',#422743); +#422743 = CARTESIAN_POINT('',(128.,-140.325,1.545)); +#422744 = CIRCLE('',#422745,0.125); +#422745 = AXIS2_PLACEMENT_3D('',#422746,#422747,#422748); +#422746 = CARTESIAN_POINT('',(128.,-140.2,1.545)); +#422747 = DIRECTION('',(-0.,0.,-1.)); +#422748 = DIRECTION('',(-0.,-1.,0.)); +#422749 = PLANE('',#422750); +#422750 = AXIS2_PLACEMENT_3D('',#422751,#422752,#422753); +#422751 = CARTESIAN_POINT('',(128.,-140.35,1.545)); +#422752 = DIRECTION('',(0.,0.,1.)); +#422753 = DIRECTION('',(1.,0.,-0.)); +#422754 = ADVANCED_FACE('',(#422755),#422766,.F.); +#422755 = FACE_BOUND('',#422756,.T.); +#422756 = EDGE_LOOP('',(#422757,#422758,#422764,#422765)); +#422757 = ORIENTED_EDGE('',*,*,#422721,.T.); +#422758 = ORIENTED_EDGE('',*,*,#422759,.T.); +#422759 = EDGE_CURVE('',#422722,#422742,#422760,.T.); +#422760 = LINE('',#422761,#422762); +#422761 = CARTESIAN_POINT('',(128.,-140.325,-3.6E-02)); +#422762 = VECTOR('',#422763,1.); +#422763 = DIRECTION('',(0.,0.,1.)); +#422764 = ORIENTED_EDGE('',*,*,#422741,.F.); +#422765 = ORIENTED_EDGE('',*,*,#422759,.F.); +#422766 = CYLINDRICAL_SURFACE('',#422767,0.125); +#422767 = AXIS2_PLACEMENT_3D('',#422768,#422769,#422770); +#422768 = CARTESIAN_POINT('',(128.,-140.2,-3.6E-02)); +#422769 = DIRECTION('',(-0.,-0.,-1.)); +#422770 = DIRECTION('',(-0.,-1.,0.)); +#422771 = MANIFOLD_SOLID_BREP('',#422772); +#422772 = CLOSED_SHELL('',(#422773,#422806,#422826,#422846)); +#422773 = ADVANCED_FACE('',(#422774),#422801,.T.); +#422774 = FACE_BOUND('',#422775,.F.); +#422775 = EDGE_LOOP('',(#422776,#422786,#422793,#422794)); +#422776 = ORIENTED_EDGE('',*,*,#422777,.T.); +#422777 = EDGE_CURVE('',#422778,#422780,#422782,.T.); +#422778 = VERTEX_POINT('',#422779); +#422779 = CARTESIAN_POINT('',(139.668067,-123.881933,-3.5E-02)); +#422780 = VERTEX_POINT('',#422781); +#422781 = CARTESIAN_POINT('',(139.668067,-123.881933,1.545)); +#422782 = LINE('',#422783,#422784); +#422783 = CARTESIAN_POINT('',(139.668067,-123.881933,-3.5E-02)); +#422784 = VECTOR('',#422785,1.); +#422785 = DIRECTION('',(0.,0.,1.)); +#422786 = ORIENTED_EDGE('',*,*,#422787,.T.); +#422787 = EDGE_CURVE('',#422780,#422780,#422788,.T.); +#422788 = CIRCLE('',#422789,0.15); +#422789 = AXIS2_PLACEMENT_3D('',#422790,#422791,#422792); +#422790 = CARTESIAN_POINT('',(139.668067,-123.731933,1.545)); +#422791 = DIRECTION('',(0.,0.,1.)); +#422792 = DIRECTION('',(-0.,-1.,0.)); +#422793 = ORIENTED_EDGE('',*,*,#422777,.F.); +#422794 = ORIENTED_EDGE('',*,*,#422795,.F.); +#422795 = EDGE_CURVE('',#422778,#422778,#422796,.T.); +#422796 = CIRCLE('',#422797,0.15); +#422797 = AXIS2_PLACEMENT_3D('',#422798,#422799,#422800); +#422798 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.5E-02)); +#422799 = DIRECTION('',(0.,0.,1.)); +#422800 = DIRECTION('',(-0.,-1.,0.)); +#422801 = CYLINDRICAL_SURFACE('',#422802,0.15); +#422802 = AXIS2_PLACEMENT_3D('',#422803,#422804,#422805); +#422803 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.5E-02)); +#422804 = DIRECTION('',(-0.,-0.,-1.)); +#422805 = DIRECTION('',(-0.,-1.,0.)); +#422806 = ADVANCED_FACE('',(#422807,#422810),#422821,.F.); +#422807 = FACE_BOUND('',#422808,.F.); +#422808 = EDGE_LOOP('',(#422809)); +#422809 = ORIENTED_EDGE('',*,*,#422795,.T.); +#422810 = FACE_BOUND('',#422811,.F.); +#422811 = EDGE_LOOP('',(#422812)); +#422812 = ORIENTED_EDGE('',*,*,#422813,.T.); +#422813 = EDGE_CURVE('',#422814,#422814,#422816,.T.); +#422814 = VERTEX_POINT('',#422815); +#422815 = CARTESIAN_POINT('',(139.668067,-123.856933,-3.5E-02)); +#422816 = CIRCLE('',#422817,0.125); +#422817 = AXIS2_PLACEMENT_3D('',#422818,#422819,#422820); +#422818 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.5E-02)); +#422819 = DIRECTION('',(-0.,0.,-1.)); +#422820 = DIRECTION('',(-0.,-1.,0.)); +#422821 = PLANE('',#422822); +#422822 = AXIS2_PLACEMENT_3D('',#422823,#422824,#422825); +#422823 = CARTESIAN_POINT('',(139.668067,-123.881933,-3.5E-02)); +#422824 = DIRECTION('',(0.,0.,1.)); +#422825 = DIRECTION('',(1.,0.,-0.)); +#422826 = ADVANCED_FACE('',(#422827,#422830),#422841,.T.); +#422827 = FACE_BOUND('',#422828,.T.); +#422828 = EDGE_LOOP('',(#422829)); +#422829 = ORIENTED_EDGE('',*,*,#422787,.T.); +#422830 = FACE_BOUND('',#422831,.T.); +#422831 = EDGE_LOOP('',(#422832)); +#422832 = ORIENTED_EDGE('',*,*,#422833,.T.); +#422833 = EDGE_CURVE('',#422834,#422834,#422836,.T.); +#422834 = VERTEX_POINT('',#422835); +#422835 = CARTESIAN_POINT('',(139.668067,-123.856933,1.545)); +#422836 = CIRCLE('',#422837,0.125); +#422837 = AXIS2_PLACEMENT_3D('',#422838,#422839,#422840); +#422838 = CARTESIAN_POINT('',(139.668067,-123.731933,1.545)); +#422839 = DIRECTION('',(-0.,0.,-1.)); +#422840 = DIRECTION('',(-0.,-1.,0.)); +#422841 = PLANE('',#422842); +#422842 = AXIS2_PLACEMENT_3D('',#422843,#422844,#422845); +#422843 = CARTESIAN_POINT('',(139.668067,-123.881933,1.545)); +#422844 = DIRECTION('',(0.,0.,1.)); +#422845 = DIRECTION('',(1.,0.,-0.)); +#422846 = ADVANCED_FACE('',(#422847),#422858,.F.); +#422847 = FACE_BOUND('',#422848,.T.); +#422848 = EDGE_LOOP('',(#422849,#422850,#422856,#422857)); +#422849 = ORIENTED_EDGE('',*,*,#422813,.T.); +#422850 = ORIENTED_EDGE('',*,*,#422851,.T.); +#422851 = EDGE_CURVE('',#422814,#422834,#422852,.T.); +#422852 = LINE('',#422853,#422854); +#422853 = CARTESIAN_POINT('',(139.668067,-123.856933,-3.6E-02)); +#422854 = VECTOR('',#422855,1.); +#422855 = DIRECTION('',(0.,0.,1.)); +#422856 = ORIENTED_EDGE('',*,*,#422833,.F.); +#422857 = ORIENTED_EDGE('',*,*,#422851,.F.); +#422858 = CYLINDRICAL_SURFACE('',#422859,0.125); +#422859 = AXIS2_PLACEMENT_3D('',#422860,#422861,#422862); +#422860 = CARTESIAN_POINT('',(139.668067,-123.731933,-3.6E-02)); +#422861 = DIRECTION('',(-0.,-0.,-1.)); +#422862 = DIRECTION('',(-0.,-1.,0.)); +#422863 = MANIFOLD_SOLID_BREP('',#422864); +#422864 = CLOSED_SHELL('',(#422865,#422898,#422918,#422938)); +#422865 = ADVANCED_FACE('',(#422866),#422893,.T.); +#422866 = FACE_BOUND('',#422867,.F.); +#422867 = EDGE_LOOP('',(#422868,#422878,#422885,#422886)); +#422868 = ORIENTED_EDGE('',*,*,#422869,.T.); +#422869 = EDGE_CURVE('',#422870,#422872,#422874,.T.); +#422870 = VERTEX_POINT('',#422871); +#422871 = CARTESIAN_POINT('',(134.7,-145.65,-3.5E-02)); +#422872 = VERTEX_POINT('',#422873); +#422873 = CARTESIAN_POINT('',(134.7,-145.65,1.545)); +#422874 = LINE('',#422875,#422876); +#422875 = CARTESIAN_POINT('',(134.7,-145.65,-3.5E-02)); +#422876 = VECTOR('',#422877,1.); +#422877 = DIRECTION('',(0.,0.,1.)); +#422878 = ORIENTED_EDGE('',*,*,#422879,.T.); +#422879 = EDGE_CURVE('',#422872,#422872,#422880,.T.); +#422880 = CIRCLE('',#422881,0.15); +#422881 = AXIS2_PLACEMENT_3D('',#422882,#422883,#422884); +#422882 = CARTESIAN_POINT('',(134.7,-145.5,1.545)); +#422883 = DIRECTION('',(0.,0.,1.)); +#422884 = DIRECTION('',(-0.,-1.,0.)); +#422885 = ORIENTED_EDGE('',*,*,#422869,.F.); +#422886 = ORIENTED_EDGE('',*,*,#422887,.F.); +#422887 = EDGE_CURVE('',#422870,#422870,#422888,.T.); +#422888 = CIRCLE('',#422889,0.15); +#422889 = AXIS2_PLACEMENT_3D('',#422890,#422891,#422892); +#422890 = CARTESIAN_POINT('',(134.7,-145.5,-3.5E-02)); +#422891 = DIRECTION('',(0.,0.,1.)); +#422892 = DIRECTION('',(-0.,-1.,0.)); +#422893 = CYLINDRICAL_SURFACE('',#422894,0.15); +#422894 = AXIS2_PLACEMENT_3D('',#422895,#422896,#422897); +#422895 = CARTESIAN_POINT('',(134.7,-145.5,-3.5E-02)); +#422896 = DIRECTION('',(-0.,-0.,-1.)); +#422897 = DIRECTION('',(-0.,-1.,0.)); +#422898 = ADVANCED_FACE('',(#422899,#422902),#422913,.F.); +#422899 = FACE_BOUND('',#422900,.F.); +#422900 = EDGE_LOOP('',(#422901)); +#422901 = ORIENTED_EDGE('',*,*,#422887,.T.); +#422902 = FACE_BOUND('',#422903,.F.); +#422903 = EDGE_LOOP('',(#422904)); +#422904 = ORIENTED_EDGE('',*,*,#422905,.T.); +#422905 = EDGE_CURVE('',#422906,#422906,#422908,.T.); +#422906 = VERTEX_POINT('',#422907); +#422907 = CARTESIAN_POINT('',(134.7,-145.625,-3.5E-02)); +#422908 = CIRCLE('',#422909,0.125); +#422909 = AXIS2_PLACEMENT_3D('',#422910,#422911,#422912); +#422910 = CARTESIAN_POINT('',(134.7,-145.5,-3.5E-02)); +#422911 = DIRECTION('',(-0.,0.,-1.)); +#422912 = DIRECTION('',(-0.,-1.,0.)); +#422913 = PLANE('',#422914); +#422914 = AXIS2_PLACEMENT_3D('',#422915,#422916,#422917); +#422915 = CARTESIAN_POINT('',(134.7,-145.65,-3.5E-02)); +#422916 = DIRECTION('',(0.,0.,1.)); +#422917 = DIRECTION('',(1.,0.,-0.)); +#422918 = ADVANCED_FACE('',(#422919,#422922),#422933,.T.); +#422919 = FACE_BOUND('',#422920,.T.); +#422920 = EDGE_LOOP('',(#422921)); +#422921 = ORIENTED_EDGE('',*,*,#422879,.T.); +#422922 = FACE_BOUND('',#422923,.T.); +#422923 = EDGE_LOOP('',(#422924)); +#422924 = ORIENTED_EDGE('',*,*,#422925,.T.); +#422925 = EDGE_CURVE('',#422926,#422926,#422928,.T.); +#422926 = VERTEX_POINT('',#422927); +#422927 = CARTESIAN_POINT('',(134.7,-145.625,1.545)); +#422928 = CIRCLE('',#422929,0.125); +#422929 = AXIS2_PLACEMENT_3D('',#422930,#422931,#422932); +#422930 = CARTESIAN_POINT('',(134.7,-145.5,1.545)); +#422931 = DIRECTION('',(-0.,0.,-1.)); +#422932 = DIRECTION('',(-0.,-1.,0.)); +#422933 = PLANE('',#422934); +#422934 = AXIS2_PLACEMENT_3D('',#422935,#422936,#422937); +#422935 = CARTESIAN_POINT('',(134.7,-145.65,1.545)); +#422936 = DIRECTION('',(0.,0.,1.)); +#422937 = DIRECTION('',(1.,0.,-0.)); +#422938 = ADVANCED_FACE('',(#422939),#422950,.F.); +#422939 = FACE_BOUND('',#422940,.T.); +#422940 = EDGE_LOOP('',(#422941,#422942,#422948,#422949)); +#422941 = ORIENTED_EDGE('',*,*,#422905,.T.); +#422942 = ORIENTED_EDGE('',*,*,#422943,.T.); +#422943 = EDGE_CURVE('',#422906,#422926,#422944,.T.); +#422944 = LINE('',#422945,#422946); +#422945 = CARTESIAN_POINT('',(134.7,-145.625,-3.6E-02)); +#422946 = VECTOR('',#422947,1.); +#422947 = DIRECTION('',(0.,0.,1.)); +#422948 = ORIENTED_EDGE('',*,*,#422925,.F.); +#422949 = ORIENTED_EDGE('',*,*,#422943,.F.); +#422950 = CYLINDRICAL_SURFACE('',#422951,0.125); +#422951 = AXIS2_PLACEMENT_3D('',#422952,#422953,#422954); +#422952 = CARTESIAN_POINT('',(134.7,-145.5,-3.6E-02)); +#422953 = DIRECTION('',(-0.,-0.,-1.)); +#422954 = DIRECTION('',(-0.,-1.,0.)); +#422955 = MANIFOLD_SOLID_BREP('',#422956); +#422956 = CLOSED_SHELL('',(#422957,#422990,#423010,#423030)); +#422957 = ADVANCED_FACE('',(#422958),#422985,.T.); +#422958 = FACE_BOUND('',#422959,.F.); +#422959 = EDGE_LOOP('',(#422960,#422970,#422977,#422978)); +#422960 = ORIENTED_EDGE('',*,*,#422961,.T.); +#422961 = EDGE_CURVE('',#422962,#422964,#422966,.T.); +#422962 = VERTEX_POINT('',#422963); +#422963 = CARTESIAN_POINT('',(136.6,-125.95,-3.5E-02)); +#422964 = VERTEX_POINT('',#422965); +#422965 = CARTESIAN_POINT('',(136.6,-125.95,1.545)); +#422966 = LINE('',#422967,#422968); +#422967 = CARTESIAN_POINT('',(136.6,-125.95,-3.5E-02)); +#422968 = VECTOR('',#422969,1.); +#422969 = DIRECTION('',(0.,0.,1.)); +#422970 = ORIENTED_EDGE('',*,*,#422971,.T.); +#422971 = EDGE_CURVE('',#422964,#422964,#422972,.T.); +#422972 = CIRCLE('',#422973,0.15); +#422973 = AXIS2_PLACEMENT_3D('',#422974,#422975,#422976); +#422974 = CARTESIAN_POINT('',(136.6,-125.8,1.545)); +#422975 = DIRECTION('',(0.,0.,1.)); +#422976 = DIRECTION('',(-0.,-1.,0.)); +#422977 = ORIENTED_EDGE('',*,*,#422961,.F.); +#422978 = ORIENTED_EDGE('',*,*,#422979,.F.); +#422979 = EDGE_CURVE('',#422962,#422962,#422980,.T.); +#422980 = CIRCLE('',#422981,0.15); +#422981 = AXIS2_PLACEMENT_3D('',#422982,#422983,#422984); +#422982 = CARTESIAN_POINT('',(136.6,-125.8,-3.5E-02)); +#422983 = DIRECTION('',(0.,0.,1.)); +#422984 = DIRECTION('',(-0.,-1.,0.)); +#422985 = CYLINDRICAL_SURFACE('',#422986,0.15); +#422986 = AXIS2_PLACEMENT_3D('',#422987,#422988,#422989); +#422987 = CARTESIAN_POINT('',(136.6,-125.8,-3.5E-02)); +#422988 = DIRECTION('',(-0.,-0.,-1.)); +#422989 = DIRECTION('',(-0.,-1.,0.)); +#422990 = ADVANCED_FACE('',(#422991,#422994),#423005,.F.); +#422991 = FACE_BOUND('',#422992,.F.); +#422992 = EDGE_LOOP('',(#422993)); +#422993 = ORIENTED_EDGE('',*,*,#422979,.T.); +#422994 = FACE_BOUND('',#422995,.F.); +#422995 = EDGE_LOOP('',(#422996)); +#422996 = ORIENTED_EDGE('',*,*,#422997,.T.); +#422997 = EDGE_CURVE('',#422998,#422998,#423000,.T.); +#422998 = VERTEX_POINT('',#422999); +#422999 = CARTESIAN_POINT('',(136.6,-125.925,-3.5E-02)); +#423000 = CIRCLE('',#423001,0.125); +#423001 = AXIS2_PLACEMENT_3D('',#423002,#423003,#423004); +#423002 = CARTESIAN_POINT('',(136.6,-125.8,-3.5E-02)); +#423003 = DIRECTION('',(-0.,0.,-1.)); +#423004 = DIRECTION('',(-0.,-1.,0.)); +#423005 = PLANE('',#423006); +#423006 = AXIS2_PLACEMENT_3D('',#423007,#423008,#423009); +#423007 = CARTESIAN_POINT('',(136.6,-125.95,-3.5E-02)); +#423008 = DIRECTION('',(0.,0.,1.)); +#423009 = DIRECTION('',(1.,0.,-0.)); +#423010 = ADVANCED_FACE('',(#423011,#423014),#423025,.T.); +#423011 = FACE_BOUND('',#423012,.T.); +#423012 = EDGE_LOOP('',(#423013)); +#423013 = ORIENTED_EDGE('',*,*,#422971,.T.); +#423014 = FACE_BOUND('',#423015,.T.); +#423015 = EDGE_LOOP('',(#423016)); +#423016 = ORIENTED_EDGE('',*,*,#423017,.T.); +#423017 = EDGE_CURVE('',#423018,#423018,#423020,.T.); +#423018 = VERTEX_POINT('',#423019); +#423019 = CARTESIAN_POINT('',(136.6,-125.925,1.545)); +#423020 = CIRCLE('',#423021,0.125); +#423021 = AXIS2_PLACEMENT_3D('',#423022,#423023,#423024); +#423022 = CARTESIAN_POINT('',(136.6,-125.8,1.545)); +#423023 = DIRECTION('',(-0.,0.,-1.)); +#423024 = DIRECTION('',(-0.,-1.,0.)); +#423025 = PLANE('',#423026); +#423026 = AXIS2_PLACEMENT_3D('',#423027,#423028,#423029); +#423027 = CARTESIAN_POINT('',(136.6,-125.95,1.545)); +#423028 = DIRECTION('',(0.,0.,1.)); +#423029 = DIRECTION('',(1.,0.,-0.)); +#423030 = ADVANCED_FACE('',(#423031),#423042,.F.); +#423031 = FACE_BOUND('',#423032,.T.); +#423032 = EDGE_LOOP('',(#423033,#423034,#423040,#423041)); +#423033 = ORIENTED_EDGE('',*,*,#422997,.T.); +#423034 = ORIENTED_EDGE('',*,*,#423035,.T.); +#423035 = EDGE_CURVE('',#422998,#423018,#423036,.T.); +#423036 = LINE('',#423037,#423038); +#423037 = CARTESIAN_POINT('',(136.6,-125.925,-3.6E-02)); +#423038 = VECTOR('',#423039,1.); +#423039 = DIRECTION('',(0.,0.,1.)); +#423040 = ORIENTED_EDGE('',*,*,#423017,.F.); +#423041 = ORIENTED_EDGE('',*,*,#423035,.F.); +#423042 = CYLINDRICAL_SURFACE('',#423043,0.125); +#423043 = AXIS2_PLACEMENT_3D('',#423044,#423045,#423046); +#423044 = CARTESIAN_POINT('',(136.6,-125.8,-3.6E-02)); +#423045 = DIRECTION('',(-0.,-0.,-1.)); +#423046 = DIRECTION('',(-0.,-1.,0.)); +#423047 = MANIFOLD_SOLID_BREP('',#423048); +#423048 = CLOSED_SHELL('',(#423049,#423082,#423102,#423122)); +#423049 = ADVANCED_FACE('',(#423050),#423077,.T.); +#423050 = FACE_BOUND('',#423051,.F.); +#423051 = EDGE_LOOP('',(#423052,#423062,#423069,#423070)); +#423052 = ORIENTED_EDGE('',*,*,#423053,.T.); +#423053 = EDGE_CURVE('',#423054,#423056,#423058,.T.); +#423054 = VERTEX_POINT('',#423055); +#423055 = CARTESIAN_POINT('',(149.,-112.15,-3.5E-02)); +#423056 = VERTEX_POINT('',#423057); +#423057 = CARTESIAN_POINT('',(149.,-112.15,1.545)); +#423058 = LINE('',#423059,#423060); +#423059 = CARTESIAN_POINT('',(149.,-112.15,-3.5E-02)); +#423060 = VECTOR('',#423061,1.); +#423061 = DIRECTION('',(0.,0.,1.)); +#423062 = ORIENTED_EDGE('',*,*,#423063,.T.); +#423063 = EDGE_CURVE('',#423056,#423056,#423064,.T.); +#423064 = CIRCLE('',#423065,0.15); +#423065 = AXIS2_PLACEMENT_3D('',#423066,#423067,#423068); +#423066 = CARTESIAN_POINT('',(149.,-112.,1.545)); +#423067 = DIRECTION('',(0.,0.,1.)); +#423068 = DIRECTION('',(-0.,-1.,0.)); +#423069 = ORIENTED_EDGE('',*,*,#423053,.F.); +#423070 = ORIENTED_EDGE('',*,*,#423071,.F.); +#423071 = EDGE_CURVE('',#423054,#423054,#423072,.T.); +#423072 = CIRCLE('',#423073,0.15); +#423073 = AXIS2_PLACEMENT_3D('',#423074,#423075,#423076); +#423074 = CARTESIAN_POINT('',(149.,-112.,-3.5E-02)); +#423075 = DIRECTION('',(0.,0.,1.)); +#423076 = DIRECTION('',(-0.,-1.,0.)); +#423077 = CYLINDRICAL_SURFACE('',#423078,0.15); +#423078 = AXIS2_PLACEMENT_3D('',#423079,#423080,#423081); +#423079 = CARTESIAN_POINT('',(149.,-112.,-3.5E-02)); +#423080 = DIRECTION('',(-0.,-0.,-1.)); +#423081 = DIRECTION('',(-0.,-1.,0.)); +#423082 = ADVANCED_FACE('',(#423083,#423086),#423097,.F.); +#423083 = FACE_BOUND('',#423084,.F.); +#423084 = EDGE_LOOP('',(#423085)); +#423085 = ORIENTED_EDGE('',*,*,#423071,.T.); +#423086 = FACE_BOUND('',#423087,.F.); +#423087 = EDGE_LOOP('',(#423088)); +#423088 = ORIENTED_EDGE('',*,*,#423089,.T.); +#423089 = EDGE_CURVE('',#423090,#423090,#423092,.T.); +#423090 = VERTEX_POINT('',#423091); +#423091 = CARTESIAN_POINT('',(149.,-112.125,-3.5E-02)); +#423092 = CIRCLE('',#423093,0.125); +#423093 = AXIS2_PLACEMENT_3D('',#423094,#423095,#423096); +#423094 = CARTESIAN_POINT('',(149.,-112.,-3.5E-02)); +#423095 = DIRECTION('',(-0.,0.,-1.)); +#423096 = DIRECTION('',(-0.,-1.,0.)); +#423097 = PLANE('',#423098); +#423098 = AXIS2_PLACEMENT_3D('',#423099,#423100,#423101); +#423099 = CARTESIAN_POINT('',(149.,-112.15,-3.5E-02)); +#423100 = DIRECTION('',(0.,0.,1.)); +#423101 = DIRECTION('',(1.,0.,-0.)); +#423102 = ADVANCED_FACE('',(#423103,#423106),#423117,.T.); +#423103 = FACE_BOUND('',#423104,.T.); +#423104 = EDGE_LOOP('',(#423105)); +#423105 = ORIENTED_EDGE('',*,*,#423063,.T.); +#423106 = FACE_BOUND('',#423107,.T.); +#423107 = EDGE_LOOP('',(#423108)); +#423108 = ORIENTED_EDGE('',*,*,#423109,.T.); +#423109 = EDGE_CURVE('',#423110,#423110,#423112,.T.); +#423110 = VERTEX_POINT('',#423111); +#423111 = CARTESIAN_POINT('',(149.,-112.125,1.545)); +#423112 = CIRCLE('',#423113,0.125); +#423113 = AXIS2_PLACEMENT_3D('',#423114,#423115,#423116); +#423114 = CARTESIAN_POINT('',(149.,-112.,1.545)); +#423115 = DIRECTION('',(-0.,0.,-1.)); +#423116 = DIRECTION('',(-0.,-1.,0.)); +#423117 = PLANE('',#423118); +#423118 = AXIS2_PLACEMENT_3D('',#423119,#423120,#423121); +#423119 = CARTESIAN_POINT('',(149.,-112.15,1.545)); +#423120 = DIRECTION('',(0.,0.,1.)); +#423121 = DIRECTION('',(1.,0.,-0.)); +#423122 = ADVANCED_FACE('',(#423123),#423134,.F.); +#423123 = FACE_BOUND('',#423124,.T.); +#423124 = EDGE_LOOP('',(#423125,#423126,#423132,#423133)); +#423125 = ORIENTED_EDGE('',*,*,#423089,.T.); +#423126 = ORIENTED_EDGE('',*,*,#423127,.T.); +#423127 = EDGE_CURVE('',#423090,#423110,#423128,.T.); +#423128 = LINE('',#423129,#423130); +#423129 = CARTESIAN_POINT('',(149.,-112.125,-3.6E-02)); +#423130 = VECTOR('',#423131,1.); +#423131 = DIRECTION('',(0.,0.,1.)); +#423132 = ORIENTED_EDGE('',*,*,#423109,.F.); +#423133 = ORIENTED_EDGE('',*,*,#423127,.F.); +#423134 = CYLINDRICAL_SURFACE('',#423135,0.125); +#423135 = AXIS2_PLACEMENT_3D('',#423136,#423137,#423138); +#423136 = CARTESIAN_POINT('',(149.,-112.,-3.6E-02)); +#423137 = DIRECTION('',(-0.,-0.,-1.)); +#423138 = DIRECTION('',(-0.,-1.,0.)); +#423139 = MANIFOLD_SOLID_BREP('',#423140); +#423140 = CLOSED_SHELL('',(#423141,#423174,#423194,#423214)); +#423141 = ADVANCED_FACE('',(#423142),#423169,.T.); +#423142 = FACE_BOUND('',#423143,.F.); +#423143 = EDGE_LOOP('',(#423144,#423154,#423161,#423162)); +#423144 = ORIENTED_EDGE('',*,*,#423145,.T.); +#423145 = EDGE_CURVE('',#423146,#423148,#423150,.T.); +#423146 = VERTEX_POINT('',#423147); +#423147 = CARTESIAN_POINT('',(133.58887,-114.125,-3.5E-02)); +#423148 = VERTEX_POINT('',#423149); +#423149 = CARTESIAN_POINT('',(133.58887,-114.125,1.545)); +#423150 = LINE('',#423151,#423152); +#423151 = CARTESIAN_POINT('',(133.58887,-114.125,-3.5E-02)); +#423152 = VECTOR('',#423153,1.); +#423153 = DIRECTION('',(0.,0.,1.)); +#423154 = ORIENTED_EDGE('',*,*,#423155,.T.); +#423155 = EDGE_CURVE('',#423148,#423148,#423156,.T.); +#423156 = CIRCLE('',#423157,0.15); +#423157 = AXIS2_PLACEMENT_3D('',#423158,#423159,#423160); +#423158 = CARTESIAN_POINT('',(133.58887,-113.975,1.545)); +#423159 = DIRECTION('',(0.,0.,1.)); +#423160 = DIRECTION('',(-0.,-1.,0.)); +#423161 = ORIENTED_EDGE('',*,*,#423145,.F.); +#423162 = ORIENTED_EDGE('',*,*,#423163,.F.); +#423163 = EDGE_CURVE('',#423146,#423146,#423164,.T.); +#423164 = CIRCLE('',#423165,0.15); +#423165 = AXIS2_PLACEMENT_3D('',#423166,#423167,#423168); +#423166 = CARTESIAN_POINT('',(133.58887,-113.975,-3.5E-02)); +#423167 = DIRECTION('',(0.,0.,1.)); +#423168 = DIRECTION('',(-0.,-1.,0.)); +#423169 = CYLINDRICAL_SURFACE('',#423170,0.15); +#423170 = AXIS2_PLACEMENT_3D('',#423171,#423172,#423173); +#423171 = CARTESIAN_POINT('',(133.58887,-113.975,-3.5E-02)); +#423172 = DIRECTION('',(-0.,-0.,-1.)); +#423173 = DIRECTION('',(-0.,-1.,0.)); +#423174 = ADVANCED_FACE('',(#423175,#423178),#423189,.F.); +#423175 = FACE_BOUND('',#423176,.F.); +#423176 = EDGE_LOOP('',(#423177)); +#423177 = ORIENTED_EDGE('',*,*,#423163,.T.); +#423178 = FACE_BOUND('',#423179,.F.); +#423179 = EDGE_LOOP('',(#423180)); +#423180 = ORIENTED_EDGE('',*,*,#423181,.T.); +#423181 = EDGE_CURVE('',#423182,#423182,#423184,.T.); +#423182 = VERTEX_POINT('',#423183); +#423183 = CARTESIAN_POINT('',(133.58887,-114.1,-3.5E-02)); +#423184 = CIRCLE('',#423185,0.125); +#423185 = AXIS2_PLACEMENT_3D('',#423186,#423187,#423188); +#423186 = CARTESIAN_POINT('',(133.58887,-113.975,-3.5E-02)); +#423187 = DIRECTION('',(-0.,0.,-1.)); +#423188 = DIRECTION('',(-0.,-1.,0.)); +#423189 = PLANE('',#423190); +#423190 = AXIS2_PLACEMENT_3D('',#423191,#423192,#423193); +#423191 = CARTESIAN_POINT('',(133.58887,-114.125,-3.5E-02)); +#423192 = DIRECTION('',(0.,0.,1.)); +#423193 = DIRECTION('',(1.,0.,-0.)); +#423194 = ADVANCED_FACE('',(#423195,#423198),#423209,.T.); +#423195 = FACE_BOUND('',#423196,.T.); +#423196 = EDGE_LOOP('',(#423197)); +#423197 = ORIENTED_EDGE('',*,*,#423155,.T.); +#423198 = FACE_BOUND('',#423199,.T.); +#423199 = EDGE_LOOP('',(#423200)); +#423200 = ORIENTED_EDGE('',*,*,#423201,.T.); +#423201 = EDGE_CURVE('',#423202,#423202,#423204,.T.); +#423202 = VERTEX_POINT('',#423203); +#423203 = CARTESIAN_POINT('',(133.58887,-114.1,1.545)); +#423204 = CIRCLE('',#423205,0.125); +#423205 = AXIS2_PLACEMENT_3D('',#423206,#423207,#423208); +#423206 = CARTESIAN_POINT('',(133.58887,-113.975,1.545)); +#423207 = DIRECTION('',(-0.,0.,-1.)); +#423208 = DIRECTION('',(-0.,-1.,0.)); +#423209 = PLANE('',#423210); +#423210 = AXIS2_PLACEMENT_3D('',#423211,#423212,#423213); +#423211 = CARTESIAN_POINT('',(133.58887,-114.125,1.545)); +#423212 = DIRECTION('',(0.,0.,1.)); +#423213 = DIRECTION('',(1.,0.,-0.)); +#423214 = ADVANCED_FACE('',(#423215),#423226,.F.); +#423215 = FACE_BOUND('',#423216,.T.); +#423216 = EDGE_LOOP('',(#423217,#423218,#423224,#423225)); +#423217 = ORIENTED_EDGE('',*,*,#423181,.T.); +#423218 = ORIENTED_EDGE('',*,*,#423219,.T.); +#423219 = EDGE_CURVE('',#423182,#423202,#423220,.T.); +#423220 = LINE('',#423221,#423222); +#423221 = CARTESIAN_POINT('',(133.58887,-114.1,-3.6E-02)); +#423222 = VECTOR('',#423223,1.); +#423223 = DIRECTION('',(0.,0.,1.)); +#423224 = ORIENTED_EDGE('',*,*,#423201,.F.); +#423225 = ORIENTED_EDGE('',*,*,#423219,.F.); +#423226 = CYLINDRICAL_SURFACE('',#423227,0.125); +#423227 = AXIS2_PLACEMENT_3D('',#423228,#423229,#423230); +#423228 = CARTESIAN_POINT('',(133.58887,-113.975,-3.6E-02)); +#423229 = DIRECTION('',(-0.,-0.,-1.)); +#423230 = DIRECTION('',(-0.,-1.,0.)); +#423231 = MANIFOLD_SOLID_BREP('',#423232); +#423232 = CLOSED_SHELL('',(#423233,#423266,#423286,#423306)); +#423233 = ADVANCED_FACE('',(#423234),#423261,.T.); +#423234 = FACE_BOUND('',#423235,.F.); +#423235 = EDGE_LOOP('',(#423236,#423246,#423253,#423254)); +#423236 = ORIENTED_EDGE('',*,*,#423237,.T.); +#423237 = EDGE_CURVE('',#423238,#423240,#423242,.T.); +#423238 = VERTEX_POINT('',#423239); +#423239 = CARTESIAN_POINT('',(143.,-114.65,-3.5E-02)); +#423240 = VERTEX_POINT('',#423241); +#423241 = CARTESIAN_POINT('',(143.,-114.65,1.545)); +#423242 = LINE('',#423243,#423244); +#423243 = CARTESIAN_POINT('',(143.,-114.65,-3.5E-02)); +#423244 = VECTOR('',#423245,1.); +#423245 = DIRECTION('',(0.,0.,1.)); +#423246 = ORIENTED_EDGE('',*,*,#423247,.T.); +#423247 = EDGE_CURVE('',#423240,#423240,#423248,.T.); +#423248 = CIRCLE('',#423249,0.15); +#423249 = AXIS2_PLACEMENT_3D('',#423250,#423251,#423252); +#423250 = CARTESIAN_POINT('',(143.,-114.5,1.545)); +#423251 = DIRECTION('',(0.,0.,1.)); +#423252 = DIRECTION('',(-0.,-1.,0.)); +#423253 = ORIENTED_EDGE('',*,*,#423237,.F.); +#423254 = ORIENTED_EDGE('',*,*,#423255,.F.); +#423255 = EDGE_CURVE('',#423238,#423238,#423256,.T.); +#423256 = CIRCLE('',#423257,0.15); +#423257 = AXIS2_PLACEMENT_3D('',#423258,#423259,#423260); +#423258 = CARTESIAN_POINT('',(143.,-114.5,-3.5E-02)); +#423259 = DIRECTION('',(0.,0.,1.)); +#423260 = DIRECTION('',(-0.,-1.,0.)); +#423261 = CYLINDRICAL_SURFACE('',#423262,0.15); +#423262 = AXIS2_PLACEMENT_3D('',#423263,#423264,#423265); +#423263 = CARTESIAN_POINT('',(143.,-114.5,-3.5E-02)); +#423264 = DIRECTION('',(-0.,-0.,-1.)); +#423265 = DIRECTION('',(-0.,-1.,0.)); +#423266 = ADVANCED_FACE('',(#423267,#423270),#423281,.F.); +#423267 = FACE_BOUND('',#423268,.F.); +#423268 = EDGE_LOOP('',(#423269)); +#423269 = ORIENTED_EDGE('',*,*,#423255,.T.); +#423270 = FACE_BOUND('',#423271,.F.); +#423271 = EDGE_LOOP('',(#423272)); +#423272 = ORIENTED_EDGE('',*,*,#423273,.T.); +#423273 = EDGE_CURVE('',#423274,#423274,#423276,.T.); +#423274 = VERTEX_POINT('',#423275); +#423275 = CARTESIAN_POINT('',(143.,-114.625,-3.5E-02)); +#423276 = CIRCLE('',#423277,0.125); +#423277 = AXIS2_PLACEMENT_3D('',#423278,#423279,#423280); +#423278 = CARTESIAN_POINT('',(143.,-114.5,-3.5E-02)); +#423279 = DIRECTION('',(-0.,0.,-1.)); +#423280 = DIRECTION('',(-0.,-1.,0.)); +#423281 = PLANE('',#423282); +#423282 = AXIS2_PLACEMENT_3D('',#423283,#423284,#423285); +#423283 = CARTESIAN_POINT('',(143.,-114.65,-3.5E-02)); +#423284 = DIRECTION('',(0.,0.,1.)); +#423285 = DIRECTION('',(1.,0.,-0.)); +#423286 = ADVANCED_FACE('',(#423287,#423290),#423301,.T.); +#423287 = FACE_BOUND('',#423288,.T.); +#423288 = EDGE_LOOP('',(#423289)); +#423289 = ORIENTED_EDGE('',*,*,#423247,.T.); +#423290 = FACE_BOUND('',#423291,.T.); +#423291 = EDGE_LOOP('',(#423292)); +#423292 = ORIENTED_EDGE('',*,*,#423293,.T.); +#423293 = EDGE_CURVE('',#423294,#423294,#423296,.T.); +#423294 = VERTEX_POINT('',#423295); +#423295 = CARTESIAN_POINT('',(143.,-114.625,1.545)); +#423296 = CIRCLE('',#423297,0.125); +#423297 = AXIS2_PLACEMENT_3D('',#423298,#423299,#423300); +#423298 = CARTESIAN_POINT('',(143.,-114.5,1.545)); +#423299 = DIRECTION('',(-0.,0.,-1.)); +#423300 = DIRECTION('',(-0.,-1.,0.)); +#423301 = PLANE('',#423302); +#423302 = AXIS2_PLACEMENT_3D('',#423303,#423304,#423305); +#423303 = CARTESIAN_POINT('',(143.,-114.65,1.545)); +#423304 = DIRECTION('',(0.,0.,1.)); +#423305 = DIRECTION('',(1.,0.,-0.)); +#423306 = ADVANCED_FACE('',(#423307),#423318,.F.); +#423307 = FACE_BOUND('',#423308,.T.); +#423308 = EDGE_LOOP('',(#423309,#423310,#423316,#423317)); +#423309 = ORIENTED_EDGE('',*,*,#423273,.T.); +#423310 = ORIENTED_EDGE('',*,*,#423311,.T.); +#423311 = EDGE_CURVE('',#423274,#423294,#423312,.T.); +#423312 = LINE('',#423313,#423314); +#423313 = CARTESIAN_POINT('',(143.,-114.625,-3.6E-02)); +#423314 = VECTOR('',#423315,1.); +#423315 = DIRECTION('',(0.,0.,1.)); +#423316 = ORIENTED_EDGE('',*,*,#423293,.F.); +#423317 = ORIENTED_EDGE('',*,*,#423311,.F.); +#423318 = CYLINDRICAL_SURFACE('',#423319,0.125); +#423319 = AXIS2_PLACEMENT_3D('',#423320,#423321,#423322); +#423320 = CARTESIAN_POINT('',(143.,-114.5,-3.6E-02)); +#423321 = DIRECTION('',(-0.,-0.,-1.)); +#423322 = DIRECTION('',(-0.,-1.,0.)); +#423323 = MANIFOLD_SOLID_BREP('',#423324); +#423324 = CLOSED_SHELL('',(#423325,#423358,#423378,#423398)); +#423325 = ADVANCED_FACE('',(#423326),#423353,.T.); +#423326 = FACE_BOUND('',#423327,.F.); +#423327 = EDGE_LOOP('',(#423328,#423338,#423345,#423346)); +#423328 = ORIENTED_EDGE('',*,*,#423329,.T.); +#423329 = EDGE_CURVE('',#423330,#423332,#423334,.T.); +#423330 = VERTEX_POINT('',#423331); +#423331 = CARTESIAN_POINT('',(133.85,-111.15,-3.5E-02)); +#423332 = VERTEX_POINT('',#423333); +#423333 = CARTESIAN_POINT('',(133.85,-111.15,1.545)); +#423334 = LINE('',#423335,#423336); +#423335 = CARTESIAN_POINT('',(133.85,-111.15,-3.5E-02)); +#423336 = VECTOR('',#423337,1.); +#423337 = DIRECTION('',(0.,0.,1.)); +#423338 = ORIENTED_EDGE('',*,*,#423339,.T.); +#423339 = EDGE_CURVE('',#423332,#423332,#423340,.T.); +#423340 = CIRCLE('',#423341,0.15); +#423341 = AXIS2_PLACEMENT_3D('',#423342,#423343,#423344); +#423342 = CARTESIAN_POINT('',(133.85,-111.,1.545)); +#423343 = DIRECTION('',(0.,0.,1.)); +#423344 = DIRECTION('',(-0.,-1.,0.)); +#423345 = ORIENTED_EDGE('',*,*,#423329,.F.); +#423346 = ORIENTED_EDGE('',*,*,#423347,.F.); +#423347 = EDGE_CURVE('',#423330,#423330,#423348,.T.); +#423348 = CIRCLE('',#423349,0.15); +#423349 = AXIS2_PLACEMENT_3D('',#423350,#423351,#423352); +#423350 = CARTESIAN_POINT('',(133.85,-111.,-3.5E-02)); +#423351 = DIRECTION('',(0.,0.,1.)); +#423352 = DIRECTION('',(-0.,-1.,0.)); +#423353 = CYLINDRICAL_SURFACE('',#423354,0.15); +#423354 = AXIS2_PLACEMENT_3D('',#423355,#423356,#423357); +#423355 = CARTESIAN_POINT('',(133.85,-111.,-3.5E-02)); +#423356 = DIRECTION('',(-0.,-0.,-1.)); +#423357 = DIRECTION('',(-0.,-1.,0.)); +#423358 = ADVANCED_FACE('',(#423359,#423362),#423373,.F.); +#423359 = FACE_BOUND('',#423360,.F.); +#423360 = EDGE_LOOP('',(#423361)); +#423361 = ORIENTED_EDGE('',*,*,#423347,.T.); +#423362 = FACE_BOUND('',#423363,.F.); +#423363 = EDGE_LOOP('',(#423364)); +#423364 = ORIENTED_EDGE('',*,*,#423365,.T.); +#423365 = EDGE_CURVE('',#423366,#423366,#423368,.T.); +#423366 = VERTEX_POINT('',#423367); +#423367 = CARTESIAN_POINT('',(133.85,-111.125,-3.5E-02)); +#423368 = CIRCLE('',#423369,0.125); +#423369 = AXIS2_PLACEMENT_3D('',#423370,#423371,#423372); +#423370 = CARTESIAN_POINT('',(133.85,-111.,-3.5E-02)); +#423371 = DIRECTION('',(-0.,0.,-1.)); +#423372 = DIRECTION('',(-0.,-1.,0.)); +#423373 = PLANE('',#423374); +#423374 = AXIS2_PLACEMENT_3D('',#423375,#423376,#423377); +#423375 = CARTESIAN_POINT('',(133.85,-111.15,-3.5E-02)); +#423376 = DIRECTION('',(0.,0.,1.)); +#423377 = DIRECTION('',(1.,0.,-0.)); +#423378 = ADVANCED_FACE('',(#423379,#423382),#423393,.T.); +#423379 = FACE_BOUND('',#423380,.T.); +#423380 = EDGE_LOOP('',(#423381)); +#423381 = ORIENTED_EDGE('',*,*,#423339,.T.); +#423382 = FACE_BOUND('',#423383,.T.); +#423383 = EDGE_LOOP('',(#423384)); +#423384 = ORIENTED_EDGE('',*,*,#423385,.T.); +#423385 = EDGE_CURVE('',#423386,#423386,#423388,.T.); +#423386 = VERTEX_POINT('',#423387); +#423387 = CARTESIAN_POINT('',(133.85,-111.125,1.545)); +#423388 = CIRCLE('',#423389,0.125); +#423389 = AXIS2_PLACEMENT_3D('',#423390,#423391,#423392); +#423390 = CARTESIAN_POINT('',(133.85,-111.,1.545)); +#423391 = DIRECTION('',(-0.,0.,-1.)); +#423392 = DIRECTION('',(-0.,-1.,0.)); +#423393 = PLANE('',#423394); +#423394 = AXIS2_PLACEMENT_3D('',#423395,#423396,#423397); +#423395 = CARTESIAN_POINT('',(133.85,-111.15,1.545)); +#423396 = DIRECTION('',(0.,0.,1.)); +#423397 = DIRECTION('',(1.,0.,-0.)); +#423398 = ADVANCED_FACE('',(#423399),#423410,.F.); +#423399 = FACE_BOUND('',#423400,.T.); +#423400 = EDGE_LOOP('',(#423401,#423402,#423408,#423409)); +#423401 = ORIENTED_EDGE('',*,*,#423365,.T.); +#423402 = ORIENTED_EDGE('',*,*,#423403,.T.); +#423403 = EDGE_CURVE('',#423366,#423386,#423404,.T.); +#423404 = LINE('',#423405,#423406); +#423405 = CARTESIAN_POINT('',(133.85,-111.125,-3.6E-02)); +#423406 = VECTOR('',#423407,1.); +#423407 = DIRECTION('',(0.,0.,1.)); +#423408 = ORIENTED_EDGE('',*,*,#423385,.F.); +#423409 = ORIENTED_EDGE('',*,*,#423403,.F.); +#423410 = CYLINDRICAL_SURFACE('',#423411,0.125); +#423411 = AXIS2_PLACEMENT_3D('',#423412,#423413,#423414); +#423412 = CARTESIAN_POINT('',(133.85,-111.,-3.6E-02)); +#423413 = DIRECTION('',(-0.,-0.,-1.)); +#423414 = DIRECTION('',(-0.,-1.,0.)); +#423415 = MANIFOLD_SOLID_BREP('',#423416); +#423416 = CLOSED_SHELL('',(#423417,#423450,#423470,#423490)); +#423417 = ADVANCED_FACE('',(#423418),#423445,.T.); +#423418 = FACE_BOUND('',#423419,.F.); +#423419 = EDGE_LOOP('',(#423420,#423430,#423437,#423438)); +#423420 = ORIENTED_EDGE('',*,*,#423421,.T.); +#423421 = EDGE_CURVE('',#423422,#423424,#423426,.T.); +#423422 = VERTEX_POINT('',#423423); +#423423 = CARTESIAN_POINT('',(123.1845,-132.6345,-3.5E-02)); +#423424 = VERTEX_POINT('',#423425); +#423425 = CARTESIAN_POINT('',(123.1845,-132.6345,1.545)); +#423426 = LINE('',#423427,#423428); +#423427 = CARTESIAN_POINT('',(123.1845,-132.6345,-3.5E-02)); +#423428 = VECTOR('',#423429,1.); +#423429 = DIRECTION('',(0.,0.,1.)); +#423430 = ORIENTED_EDGE('',*,*,#423431,.T.); +#423431 = EDGE_CURVE('',#423424,#423424,#423432,.T.); +#423432 = CIRCLE('',#423433,0.15); +#423433 = AXIS2_PLACEMENT_3D('',#423434,#423435,#423436); +#423434 = CARTESIAN_POINT('',(123.1845,-132.4845,1.545)); +#423435 = DIRECTION('',(0.,0.,1.)); +#423436 = DIRECTION('',(-0.,-1.,0.)); +#423437 = ORIENTED_EDGE('',*,*,#423421,.F.); +#423438 = ORIENTED_EDGE('',*,*,#423439,.F.); +#423439 = EDGE_CURVE('',#423422,#423422,#423440,.T.); +#423440 = CIRCLE('',#423441,0.15); +#423441 = AXIS2_PLACEMENT_3D('',#423442,#423443,#423444); +#423442 = CARTESIAN_POINT('',(123.1845,-132.4845,-3.5E-02)); +#423443 = DIRECTION('',(0.,0.,1.)); +#423444 = DIRECTION('',(-0.,-1.,0.)); +#423445 = CYLINDRICAL_SURFACE('',#423446,0.15); +#423446 = AXIS2_PLACEMENT_3D('',#423447,#423448,#423449); +#423447 = CARTESIAN_POINT('',(123.1845,-132.4845,-3.5E-02)); +#423448 = DIRECTION('',(-0.,-0.,-1.)); +#423449 = DIRECTION('',(-0.,-1.,0.)); +#423450 = ADVANCED_FACE('',(#423451,#423454),#423465,.F.); +#423451 = FACE_BOUND('',#423452,.F.); +#423452 = EDGE_LOOP('',(#423453)); +#423453 = ORIENTED_EDGE('',*,*,#423439,.T.); +#423454 = FACE_BOUND('',#423455,.F.); +#423455 = EDGE_LOOP('',(#423456)); +#423456 = ORIENTED_EDGE('',*,*,#423457,.T.); +#423457 = EDGE_CURVE('',#423458,#423458,#423460,.T.); +#423458 = VERTEX_POINT('',#423459); +#423459 = CARTESIAN_POINT('',(123.1845,-132.6095,-3.5E-02)); +#423460 = CIRCLE('',#423461,0.125); +#423461 = AXIS2_PLACEMENT_3D('',#423462,#423463,#423464); +#423462 = CARTESIAN_POINT('',(123.1845,-132.4845,-3.5E-02)); +#423463 = DIRECTION('',(-0.,0.,-1.)); +#423464 = DIRECTION('',(-0.,-1.,0.)); +#423465 = PLANE('',#423466); +#423466 = AXIS2_PLACEMENT_3D('',#423467,#423468,#423469); +#423467 = CARTESIAN_POINT('',(123.1845,-132.6345,-3.5E-02)); +#423468 = DIRECTION('',(0.,0.,1.)); +#423469 = DIRECTION('',(1.,0.,-0.)); +#423470 = ADVANCED_FACE('',(#423471,#423474),#423485,.T.); +#423471 = FACE_BOUND('',#423472,.T.); +#423472 = EDGE_LOOP('',(#423473)); +#423473 = ORIENTED_EDGE('',*,*,#423431,.T.); +#423474 = FACE_BOUND('',#423475,.T.); +#423475 = EDGE_LOOP('',(#423476)); +#423476 = ORIENTED_EDGE('',*,*,#423477,.T.); +#423477 = EDGE_CURVE('',#423478,#423478,#423480,.T.); +#423478 = VERTEX_POINT('',#423479); +#423479 = CARTESIAN_POINT('',(123.1845,-132.6095,1.545)); +#423480 = CIRCLE('',#423481,0.125); +#423481 = AXIS2_PLACEMENT_3D('',#423482,#423483,#423484); +#423482 = CARTESIAN_POINT('',(123.1845,-132.4845,1.545)); +#423483 = DIRECTION('',(-0.,0.,-1.)); +#423484 = DIRECTION('',(-0.,-1.,0.)); +#423485 = PLANE('',#423486); +#423486 = AXIS2_PLACEMENT_3D('',#423487,#423488,#423489); +#423487 = CARTESIAN_POINT('',(123.1845,-132.6345,1.545)); +#423488 = DIRECTION('',(0.,0.,1.)); +#423489 = DIRECTION('',(1.,0.,-0.)); +#423490 = ADVANCED_FACE('',(#423491),#423502,.F.); +#423491 = FACE_BOUND('',#423492,.T.); +#423492 = EDGE_LOOP('',(#423493,#423494,#423500,#423501)); +#423493 = ORIENTED_EDGE('',*,*,#423457,.T.); +#423494 = ORIENTED_EDGE('',*,*,#423495,.T.); +#423495 = EDGE_CURVE('',#423458,#423478,#423496,.T.); +#423496 = LINE('',#423497,#423498); +#423497 = CARTESIAN_POINT('',(123.1845,-132.6095,-3.6E-02)); +#423498 = VECTOR('',#423499,1.); +#423499 = DIRECTION('',(0.,0.,1.)); +#423500 = ORIENTED_EDGE('',*,*,#423477,.F.); +#423501 = ORIENTED_EDGE('',*,*,#423495,.F.); +#423502 = CYLINDRICAL_SURFACE('',#423503,0.125); +#423503 = AXIS2_PLACEMENT_3D('',#423504,#423505,#423506); +#423504 = CARTESIAN_POINT('',(123.1845,-132.4845,-3.6E-02)); +#423505 = DIRECTION('',(-0.,-0.,-1.)); +#423506 = DIRECTION('',(-0.,-1.,0.)); +#423507 = MANIFOLD_SOLID_BREP('',#423508); +#423508 = CLOSED_SHELL('',(#423509,#423542,#423562,#423582)); +#423509 = ADVANCED_FACE('',(#423510),#423537,.T.); +#423510 = FACE_BOUND('',#423511,.F.); +#423511 = EDGE_LOOP('',(#423512,#423522,#423529,#423530)); +#423512 = ORIENTED_EDGE('',*,*,#423513,.T.); +#423513 = EDGE_CURVE('',#423514,#423516,#423518,.T.); +#423514 = VERTEX_POINT('',#423515); +#423515 = CARTESIAN_POINT('',(131.25,-74.05,-3.5E-02)); +#423516 = VERTEX_POINT('',#423517); +#423517 = CARTESIAN_POINT('',(131.25,-74.05,1.545)); +#423518 = LINE('',#423519,#423520); +#423519 = CARTESIAN_POINT('',(131.25,-74.05,-3.5E-02)); +#423520 = VECTOR('',#423521,1.); +#423521 = DIRECTION('',(0.,0.,1.)); +#423522 = ORIENTED_EDGE('',*,*,#423523,.T.); +#423523 = EDGE_CURVE('',#423516,#423516,#423524,.T.); +#423524 = CIRCLE('',#423525,0.15); +#423525 = AXIS2_PLACEMENT_3D('',#423526,#423527,#423528); +#423526 = CARTESIAN_POINT('',(131.25,-73.9,1.545)); +#423527 = DIRECTION('',(0.,0.,1.)); +#423528 = DIRECTION('',(-0.,-1.,0.)); +#423529 = ORIENTED_EDGE('',*,*,#423513,.F.); +#423530 = ORIENTED_EDGE('',*,*,#423531,.F.); +#423531 = EDGE_CURVE('',#423514,#423514,#423532,.T.); +#423532 = CIRCLE('',#423533,0.15); +#423533 = AXIS2_PLACEMENT_3D('',#423534,#423535,#423536); +#423534 = CARTESIAN_POINT('',(131.25,-73.9,-3.5E-02)); +#423535 = DIRECTION('',(0.,0.,1.)); +#423536 = DIRECTION('',(-0.,-1.,0.)); +#423537 = CYLINDRICAL_SURFACE('',#423538,0.15); +#423538 = AXIS2_PLACEMENT_3D('',#423539,#423540,#423541); +#423539 = CARTESIAN_POINT('',(131.25,-73.9,-3.5E-02)); +#423540 = DIRECTION('',(-0.,-0.,-1.)); +#423541 = DIRECTION('',(-0.,-1.,0.)); +#423542 = ADVANCED_FACE('',(#423543,#423546),#423557,.F.); +#423543 = FACE_BOUND('',#423544,.F.); +#423544 = EDGE_LOOP('',(#423545)); +#423545 = ORIENTED_EDGE('',*,*,#423531,.T.); +#423546 = FACE_BOUND('',#423547,.F.); +#423547 = EDGE_LOOP('',(#423548)); +#423548 = ORIENTED_EDGE('',*,*,#423549,.T.); +#423549 = EDGE_CURVE('',#423550,#423550,#423552,.T.); +#423550 = VERTEX_POINT('',#423551); +#423551 = CARTESIAN_POINT('',(131.25,-74.025,-3.5E-02)); +#423552 = CIRCLE('',#423553,0.125); +#423553 = AXIS2_PLACEMENT_3D('',#423554,#423555,#423556); +#423554 = CARTESIAN_POINT('',(131.25,-73.9,-3.5E-02)); +#423555 = DIRECTION('',(-0.,0.,-1.)); +#423556 = DIRECTION('',(-0.,-1.,0.)); +#423557 = PLANE('',#423558); +#423558 = AXIS2_PLACEMENT_3D('',#423559,#423560,#423561); +#423559 = CARTESIAN_POINT('',(131.25,-74.05,-3.5E-02)); +#423560 = DIRECTION('',(0.,0.,1.)); +#423561 = DIRECTION('',(1.,0.,-0.)); +#423562 = ADVANCED_FACE('',(#423563,#423566),#423577,.T.); +#423563 = FACE_BOUND('',#423564,.T.); +#423564 = EDGE_LOOP('',(#423565)); +#423565 = ORIENTED_EDGE('',*,*,#423523,.T.); +#423566 = FACE_BOUND('',#423567,.T.); +#423567 = EDGE_LOOP('',(#423568)); +#423568 = ORIENTED_EDGE('',*,*,#423569,.T.); +#423569 = EDGE_CURVE('',#423570,#423570,#423572,.T.); +#423570 = VERTEX_POINT('',#423571); +#423571 = CARTESIAN_POINT('',(131.25,-74.025,1.545)); +#423572 = CIRCLE('',#423573,0.125); +#423573 = AXIS2_PLACEMENT_3D('',#423574,#423575,#423576); +#423574 = CARTESIAN_POINT('',(131.25,-73.9,1.545)); +#423575 = DIRECTION('',(-0.,0.,-1.)); +#423576 = DIRECTION('',(-0.,-1.,0.)); +#423577 = PLANE('',#423578); +#423578 = AXIS2_PLACEMENT_3D('',#423579,#423580,#423581); +#423579 = CARTESIAN_POINT('',(131.25,-74.05,1.545)); +#423580 = DIRECTION('',(0.,0.,1.)); +#423581 = DIRECTION('',(1.,0.,-0.)); +#423582 = ADVANCED_FACE('',(#423583),#423594,.F.); +#423583 = FACE_BOUND('',#423584,.T.); +#423584 = EDGE_LOOP('',(#423585,#423586,#423592,#423593)); +#423585 = ORIENTED_EDGE('',*,*,#423549,.T.); +#423586 = ORIENTED_EDGE('',*,*,#423587,.T.); +#423587 = EDGE_CURVE('',#423550,#423570,#423588,.T.); +#423588 = LINE('',#423589,#423590); +#423589 = CARTESIAN_POINT('',(131.25,-74.025,-3.6E-02)); +#423590 = VECTOR('',#423591,1.); +#423591 = DIRECTION('',(0.,0.,1.)); +#423592 = ORIENTED_EDGE('',*,*,#423569,.F.); +#423593 = ORIENTED_EDGE('',*,*,#423587,.F.); +#423594 = CYLINDRICAL_SURFACE('',#423595,0.125); +#423595 = AXIS2_PLACEMENT_3D('',#423596,#423597,#423598); +#423596 = CARTESIAN_POINT('',(131.25,-73.9,-3.6E-02)); +#423597 = DIRECTION('',(-0.,-0.,-1.)); +#423598 = DIRECTION('',(-0.,-1.,0.)); +#423599 = MANIFOLD_SOLID_BREP('',#423600); +#423600 = CLOSED_SHELL('',(#423601,#423634,#423654,#423674)); +#423601 = ADVANCED_FACE('',(#423602),#423629,.T.); +#423602 = FACE_BOUND('',#423603,.F.); +#423603 = EDGE_LOOP('',(#423604,#423614,#423621,#423622)); +#423604 = ORIENTED_EDGE('',*,*,#423605,.T.); +#423605 = EDGE_CURVE('',#423606,#423608,#423610,.T.); +#423606 = VERTEX_POINT('',#423607); +#423607 = CARTESIAN_POINT('',(136.55,-146.2,-3.5E-02)); +#423608 = VERTEX_POINT('',#423609); +#423609 = CARTESIAN_POINT('',(136.55,-146.2,1.545)); +#423610 = LINE('',#423611,#423612); +#423611 = CARTESIAN_POINT('',(136.55,-146.2,-3.5E-02)); +#423612 = VECTOR('',#423613,1.); +#423613 = DIRECTION('',(0.,0.,1.)); +#423614 = ORIENTED_EDGE('',*,*,#423615,.T.); +#423615 = EDGE_CURVE('',#423608,#423608,#423616,.T.); +#423616 = CIRCLE('',#423617,0.15); +#423617 = AXIS2_PLACEMENT_3D('',#423618,#423619,#423620); +#423618 = CARTESIAN_POINT('',(136.55,-146.05,1.545)); +#423619 = DIRECTION('',(0.,0.,1.)); +#423620 = DIRECTION('',(-0.,-1.,0.)); +#423621 = ORIENTED_EDGE('',*,*,#423605,.F.); +#423622 = ORIENTED_EDGE('',*,*,#423623,.F.); +#423623 = EDGE_CURVE('',#423606,#423606,#423624,.T.); +#423624 = CIRCLE('',#423625,0.15); +#423625 = AXIS2_PLACEMENT_3D('',#423626,#423627,#423628); +#423626 = CARTESIAN_POINT('',(136.55,-146.05,-3.5E-02)); +#423627 = DIRECTION('',(0.,0.,1.)); +#423628 = DIRECTION('',(-0.,-1.,0.)); +#423629 = CYLINDRICAL_SURFACE('',#423630,0.15); +#423630 = AXIS2_PLACEMENT_3D('',#423631,#423632,#423633); +#423631 = CARTESIAN_POINT('',(136.55,-146.05,-3.5E-02)); +#423632 = DIRECTION('',(-0.,-0.,-1.)); +#423633 = DIRECTION('',(-0.,-1.,0.)); +#423634 = ADVANCED_FACE('',(#423635,#423638),#423649,.F.); +#423635 = FACE_BOUND('',#423636,.F.); +#423636 = EDGE_LOOP('',(#423637)); +#423637 = ORIENTED_EDGE('',*,*,#423623,.T.); +#423638 = FACE_BOUND('',#423639,.F.); +#423639 = EDGE_LOOP('',(#423640)); +#423640 = ORIENTED_EDGE('',*,*,#423641,.T.); +#423641 = EDGE_CURVE('',#423642,#423642,#423644,.T.); +#423642 = VERTEX_POINT('',#423643); +#423643 = CARTESIAN_POINT('',(136.55,-146.175,-3.5E-02)); +#423644 = CIRCLE('',#423645,0.125); +#423645 = AXIS2_PLACEMENT_3D('',#423646,#423647,#423648); +#423646 = CARTESIAN_POINT('',(136.55,-146.05,-3.5E-02)); +#423647 = DIRECTION('',(-0.,0.,-1.)); +#423648 = DIRECTION('',(-0.,-1.,0.)); +#423649 = PLANE('',#423650); +#423650 = AXIS2_PLACEMENT_3D('',#423651,#423652,#423653); +#423651 = CARTESIAN_POINT('',(136.55,-146.2,-3.5E-02)); +#423652 = DIRECTION('',(0.,0.,1.)); +#423653 = DIRECTION('',(1.,0.,-0.)); +#423654 = ADVANCED_FACE('',(#423655,#423658),#423669,.T.); +#423655 = FACE_BOUND('',#423656,.T.); +#423656 = EDGE_LOOP('',(#423657)); +#423657 = ORIENTED_EDGE('',*,*,#423615,.T.); +#423658 = FACE_BOUND('',#423659,.T.); +#423659 = EDGE_LOOP('',(#423660)); +#423660 = ORIENTED_EDGE('',*,*,#423661,.T.); +#423661 = EDGE_CURVE('',#423662,#423662,#423664,.T.); +#423662 = VERTEX_POINT('',#423663); +#423663 = CARTESIAN_POINT('',(136.55,-146.175,1.545)); +#423664 = CIRCLE('',#423665,0.125); +#423665 = AXIS2_PLACEMENT_3D('',#423666,#423667,#423668); +#423666 = CARTESIAN_POINT('',(136.55,-146.05,1.545)); +#423667 = DIRECTION('',(-0.,0.,-1.)); +#423668 = DIRECTION('',(-0.,-1.,0.)); +#423669 = PLANE('',#423670); +#423670 = AXIS2_PLACEMENT_3D('',#423671,#423672,#423673); +#423671 = CARTESIAN_POINT('',(136.55,-146.2,1.545)); +#423672 = DIRECTION('',(0.,0.,1.)); +#423673 = DIRECTION('',(1.,0.,-0.)); +#423674 = ADVANCED_FACE('',(#423675),#423686,.F.); +#423675 = FACE_BOUND('',#423676,.T.); +#423676 = EDGE_LOOP('',(#423677,#423678,#423684,#423685)); +#423677 = ORIENTED_EDGE('',*,*,#423641,.T.); +#423678 = ORIENTED_EDGE('',*,*,#423679,.T.); +#423679 = EDGE_CURVE('',#423642,#423662,#423680,.T.); +#423680 = LINE('',#423681,#423682); +#423681 = CARTESIAN_POINT('',(136.55,-146.175,-3.6E-02)); +#423682 = VECTOR('',#423683,1.); +#423683 = DIRECTION('',(0.,0.,1.)); +#423684 = ORIENTED_EDGE('',*,*,#423661,.F.); +#423685 = ORIENTED_EDGE('',*,*,#423679,.F.); +#423686 = CYLINDRICAL_SURFACE('',#423687,0.125); +#423687 = AXIS2_PLACEMENT_3D('',#423688,#423689,#423690); +#423688 = CARTESIAN_POINT('',(136.55,-146.05,-3.6E-02)); +#423689 = DIRECTION('',(-0.,-0.,-1.)); +#423690 = DIRECTION('',(-0.,-1.,0.)); +#423691 = MANIFOLD_SOLID_BREP('',#423692); +#423692 = CLOSED_SHELL('',(#423693,#423726,#423746,#423766)); +#423693 = ADVANCED_FACE('',(#423694),#423721,.T.); +#423694 = FACE_BOUND('',#423695,.F.); +#423695 = EDGE_LOOP('',(#423696,#423706,#423713,#423714)); +#423696 = ORIENTED_EDGE('',*,*,#423697,.T.); +#423697 = EDGE_CURVE('',#423698,#423700,#423702,.T.); +#423698 = VERTEX_POINT('',#423699); +#423699 = CARTESIAN_POINT('',(128.574265,-102.724265,-3.5E-02)); +#423700 = VERTEX_POINT('',#423701); +#423701 = CARTESIAN_POINT('',(128.574265,-102.724265,1.545)); +#423702 = LINE('',#423703,#423704); +#423703 = CARTESIAN_POINT('',(128.574265,-102.724265,-3.5E-02)); +#423704 = VECTOR('',#423705,1.); +#423705 = DIRECTION('',(0.,0.,1.)); +#423706 = ORIENTED_EDGE('',*,*,#423707,.T.); +#423707 = EDGE_CURVE('',#423700,#423700,#423708,.T.); +#423708 = CIRCLE('',#423709,0.15); +#423709 = AXIS2_PLACEMENT_3D('',#423710,#423711,#423712); +#423710 = CARTESIAN_POINT('',(128.574265,-102.574265,1.545)); +#423711 = DIRECTION('',(0.,0.,1.)); +#423712 = DIRECTION('',(-0.,-1.,0.)); +#423713 = ORIENTED_EDGE('',*,*,#423697,.F.); +#423714 = ORIENTED_EDGE('',*,*,#423715,.F.); +#423715 = EDGE_CURVE('',#423698,#423698,#423716,.T.); +#423716 = CIRCLE('',#423717,0.15); +#423717 = AXIS2_PLACEMENT_3D('',#423718,#423719,#423720); +#423718 = CARTESIAN_POINT('',(128.574265,-102.574265,-3.5E-02)); +#423719 = DIRECTION('',(0.,0.,1.)); +#423720 = DIRECTION('',(-0.,-1.,0.)); +#423721 = CYLINDRICAL_SURFACE('',#423722,0.15); +#423722 = AXIS2_PLACEMENT_3D('',#423723,#423724,#423725); +#423723 = CARTESIAN_POINT('',(128.574265,-102.574265,-3.5E-02)); +#423724 = DIRECTION('',(-0.,-0.,-1.)); +#423725 = DIRECTION('',(-0.,-1.,0.)); +#423726 = ADVANCED_FACE('',(#423727,#423730),#423741,.F.); +#423727 = FACE_BOUND('',#423728,.F.); +#423728 = EDGE_LOOP('',(#423729)); +#423729 = ORIENTED_EDGE('',*,*,#423715,.T.); +#423730 = FACE_BOUND('',#423731,.F.); +#423731 = EDGE_LOOP('',(#423732)); +#423732 = ORIENTED_EDGE('',*,*,#423733,.T.); +#423733 = EDGE_CURVE('',#423734,#423734,#423736,.T.); +#423734 = VERTEX_POINT('',#423735); +#423735 = CARTESIAN_POINT('',(128.574265,-102.699265,-3.5E-02)); +#423736 = CIRCLE('',#423737,0.125); +#423737 = AXIS2_PLACEMENT_3D('',#423738,#423739,#423740); +#423738 = CARTESIAN_POINT('',(128.574265,-102.574265,-3.5E-02)); +#423739 = DIRECTION('',(-0.,0.,-1.)); +#423740 = DIRECTION('',(-0.,-1.,0.)); +#423741 = PLANE('',#423742); +#423742 = AXIS2_PLACEMENT_3D('',#423743,#423744,#423745); +#423743 = CARTESIAN_POINT('',(128.574265,-102.724265,-3.5E-02)); +#423744 = DIRECTION('',(0.,0.,1.)); +#423745 = DIRECTION('',(1.,0.,-0.)); +#423746 = ADVANCED_FACE('',(#423747,#423750),#423761,.T.); +#423747 = FACE_BOUND('',#423748,.T.); +#423748 = EDGE_LOOP('',(#423749)); +#423749 = ORIENTED_EDGE('',*,*,#423707,.T.); +#423750 = FACE_BOUND('',#423751,.T.); +#423751 = EDGE_LOOP('',(#423752)); +#423752 = ORIENTED_EDGE('',*,*,#423753,.T.); +#423753 = EDGE_CURVE('',#423754,#423754,#423756,.T.); +#423754 = VERTEX_POINT('',#423755); +#423755 = CARTESIAN_POINT('',(128.574265,-102.699265,1.545)); +#423756 = CIRCLE('',#423757,0.125); +#423757 = AXIS2_PLACEMENT_3D('',#423758,#423759,#423760); +#423758 = CARTESIAN_POINT('',(128.574265,-102.574265,1.545)); +#423759 = DIRECTION('',(-0.,0.,-1.)); +#423760 = DIRECTION('',(-0.,-1.,0.)); +#423761 = PLANE('',#423762); +#423762 = AXIS2_PLACEMENT_3D('',#423763,#423764,#423765); +#423763 = CARTESIAN_POINT('',(128.574265,-102.724265,1.545)); +#423764 = DIRECTION('',(0.,0.,1.)); +#423765 = DIRECTION('',(1.,0.,-0.)); +#423766 = ADVANCED_FACE('',(#423767),#423778,.F.); +#423767 = FACE_BOUND('',#423768,.T.); +#423768 = EDGE_LOOP('',(#423769,#423770,#423776,#423777)); +#423769 = ORIENTED_EDGE('',*,*,#423733,.T.); +#423770 = ORIENTED_EDGE('',*,*,#423771,.T.); +#423771 = EDGE_CURVE('',#423734,#423754,#423772,.T.); +#423772 = LINE('',#423773,#423774); +#423773 = CARTESIAN_POINT('',(128.574265,-102.699265,-3.6E-02)); +#423774 = VECTOR('',#423775,1.); +#423775 = DIRECTION('',(0.,0.,1.)); +#423776 = ORIENTED_EDGE('',*,*,#423753,.F.); +#423777 = ORIENTED_EDGE('',*,*,#423771,.F.); +#423778 = CYLINDRICAL_SURFACE('',#423779,0.125); +#423779 = AXIS2_PLACEMENT_3D('',#423780,#423781,#423782); +#423780 = CARTESIAN_POINT('',(128.574265,-102.574265,-3.6E-02)); +#423781 = DIRECTION('',(-0.,-0.,-1.)); +#423782 = DIRECTION('',(-0.,-1.,0.)); +#423783 = MANIFOLD_SOLID_BREP('',#423784); +#423784 = CLOSED_SHELL('',(#423785,#423818,#423838,#423858)); +#423785 = ADVANCED_FACE('',(#423786),#423813,.T.); +#423786 = FACE_BOUND('',#423787,.F.); +#423787 = EDGE_LOOP('',(#423788,#423798,#423805,#423806)); +#423788 = ORIENTED_EDGE('',*,*,#423789,.T.); +#423789 = EDGE_CURVE('',#423790,#423792,#423794,.T.); +#423790 = VERTEX_POINT('',#423791); +#423791 = CARTESIAN_POINT('',(140.9,-73.05,-3.5E-02)); +#423792 = VERTEX_POINT('',#423793); +#423793 = CARTESIAN_POINT('',(140.9,-73.05,1.545)); +#423794 = LINE('',#423795,#423796); +#423795 = CARTESIAN_POINT('',(140.9,-73.05,-3.5E-02)); +#423796 = VECTOR('',#423797,1.); +#423797 = DIRECTION('',(0.,0.,1.)); +#423798 = ORIENTED_EDGE('',*,*,#423799,.T.); +#423799 = EDGE_CURVE('',#423792,#423792,#423800,.T.); +#423800 = CIRCLE('',#423801,0.15); +#423801 = AXIS2_PLACEMENT_3D('',#423802,#423803,#423804); +#423802 = CARTESIAN_POINT('',(140.9,-72.9,1.545)); +#423803 = DIRECTION('',(0.,0.,1.)); +#423804 = DIRECTION('',(-0.,-1.,0.)); +#423805 = ORIENTED_EDGE('',*,*,#423789,.F.); +#423806 = ORIENTED_EDGE('',*,*,#423807,.F.); +#423807 = EDGE_CURVE('',#423790,#423790,#423808,.T.); +#423808 = CIRCLE('',#423809,0.15); +#423809 = AXIS2_PLACEMENT_3D('',#423810,#423811,#423812); +#423810 = CARTESIAN_POINT('',(140.9,-72.9,-3.5E-02)); +#423811 = DIRECTION('',(0.,0.,1.)); +#423812 = DIRECTION('',(-0.,-1.,0.)); +#423813 = CYLINDRICAL_SURFACE('',#423814,0.15); +#423814 = AXIS2_PLACEMENT_3D('',#423815,#423816,#423817); +#423815 = CARTESIAN_POINT('',(140.9,-72.9,-3.5E-02)); +#423816 = DIRECTION('',(-0.,-0.,-1.)); +#423817 = DIRECTION('',(-0.,-1.,0.)); +#423818 = ADVANCED_FACE('',(#423819,#423822),#423833,.F.); +#423819 = FACE_BOUND('',#423820,.F.); +#423820 = EDGE_LOOP('',(#423821)); +#423821 = ORIENTED_EDGE('',*,*,#423807,.T.); +#423822 = FACE_BOUND('',#423823,.F.); +#423823 = EDGE_LOOP('',(#423824)); +#423824 = ORIENTED_EDGE('',*,*,#423825,.T.); +#423825 = EDGE_CURVE('',#423826,#423826,#423828,.T.); +#423826 = VERTEX_POINT('',#423827); +#423827 = CARTESIAN_POINT('',(140.9,-73.025,-3.5E-02)); +#423828 = CIRCLE('',#423829,0.125); +#423829 = AXIS2_PLACEMENT_3D('',#423830,#423831,#423832); +#423830 = CARTESIAN_POINT('',(140.9,-72.9,-3.5E-02)); +#423831 = DIRECTION('',(-0.,0.,-1.)); +#423832 = DIRECTION('',(-0.,-1.,0.)); +#423833 = PLANE('',#423834); +#423834 = AXIS2_PLACEMENT_3D('',#423835,#423836,#423837); +#423835 = CARTESIAN_POINT('',(140.9,-73.05,-3.5E-02)); +#423836 = DIRECTION('',(0.,0.,1.)); +#423837 = DIRECTION('',(1.,0.,-0.)); +#423838 = ADVANCED_FACE('',(#423839,#423842),#423853,.T.); +#423839 = FACE_BOUND('',#423840,.T.); +#423840 = EDGE_LOOP('',(#423841)); +#423841 = ORIENTED_EDGE('',*,*,#423799,.T.); +#423842 = FACE_BOUND('',#423843,.T.); +#423843 = EDGE_LOOP('',(#423844)); +#423844 = ORIENTED_EDGE('',*,*,#423845,.T.); +#423845 = EDGE_CURVE('',#423846,#423846,#423848,.T.); +#423846 = VERTEX_POINT('',#423847); +#423847 = CARTESIAN_POINT('',(140.9,-73.025,1.545)); +#423848 = CIRCLE('',#423849,0.125); +#423849 = AXIS2_PLACEMENT_3D('',#423850,#423851,#423852); +#423850 = CARTESIAN_POINT('',(140.9,-72.9,1.545)); +#423851 = DIRECTION('',(-0.,0.,-1.)); +#423852 = DIRECTION('',(-0.,-1.,0.)); +#423853 = PLANE('',#423854); +#423854 = AXIS2_PLACEMENT_3D('',#423855,#423856,#423857); +#423855 = CARTESIAN_POINT('',(140.9,-73.05,1.545)); +#423856 = DIRECTION('',(0.,0.,1.)); +#423857 = DIRECTION('',(1.,0.,-0.)); +#423858 = ADVANCED_FACE('',(#423859),#423870,.F.); +#423859 = FACE_BOUND('',#423860,.T.); +#423860 = EDGE_LOOP('',(#423861,#423862,#423868,#423869)); +#423861 = ORIENTED_EDGE('',*,*,#423825,.T.); +#423862 = ORIENTED_EDGE('',*,*,#423863,.T.); +#423863 = EDGE_CURVE('',#423826,#423846,#423864,.T.); +#423864 = LINE('',#423865,#423866); +#423865 = CARTESIAN_POINT('',(140.9,-73.025,-3.6E-02)); +#423866 = VECTOR('',#423867,1.); +#423867 = DIRECTION('',(0.,0.,1.)); +#423868 = ORIENTED_EDGE('',*,*,#423845,.F.); +#423869 = ORIENTED_EDGE('',*,*,#423863,.F.); +#423870 = CYLINDRICAL_SURFACE('',#423871,0.125); +#423871 = AXIS2_PLACEMENT_3D('',#423872,#423873,#423874); +#423872 = CARTESIAN_POINT('',(140.9,-72.9,-3.6E-02)); +#423873 = DIRECTION('',(-0.,-0.,-1.)); +#423874 = DIRECTION('',(-0.,-1.,0.)); +#423875 = MANIFOLD_SOLID_BREP('',#423876); +#423876 = CLOSED_SHELL('',(#423877,#423910,#423930,#423950)); +#423877 = ADVANCED_FACE('',(#423878),#423905,.T.); +#423878 = FACE_BOUND('',#423879,.F.); +#423879 = EDGE_LOOP('',(#423880,#423890,#423897,#423898)); +#423880 = ORIENTED_EDGE('',*,*,#423881,.T.); +#423881 = EDGE_CURVE('',#423882,#423884,#423886,.T.); +#423882 = VERTEX_POINT('',#423883); +#423883 = CARTESIAN_POINT('',(139.342332,-122.707668,-3.5E-02)); +#423884 = VERTEX_POINT('',#423885); +#423885 = CARTESIAN_POINT('',(139.342332,-122.707668,1.545)); +#423886 = LINE('',#423887,#423888); +#423887 = CARTESIAN_POINT('',(139.342332,-122.707668,-3.5E-02)); +#423888 = VECTOR('',#423889,1.); +#423889 = DIRECTION('',(0.,0.,1.)); +#423890 = ORIENTED_EDGE('',*,*,#423891,.T.); +#423891 = EDGE_CURVE('',#423884,#423884,#423892,.T.); +#423892 = CIRCLE('',#423893,0.15); +#423893 = AXIS2_PLACEMENT_3D('',#423894,#423895,#423896); +#423894 = CARTESIAN_POINT('',(139.342332,-122.557668,1.545)); +#423895 = DIRECTION('',(0.,0.,1.)); +#423896 = DIRECTION('',(-0.,-1.,0.)); +#423897 = ORIENTED_EDGE('',*,*,#423881,.F.); +#423898 = ORIENTED_EDGE('',*,*,#423899,.F.); +#423899 = EDGE_CURVE('',#423882,#423882,#423900,.T.); +#423900 = CIRCLE('',#423901,0.15); +#423901 = AXIS2_PLACEMENT_3D('',#423902,#423903,#423904); +#423902 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.5E-02)); +#423903 = DIRECTION('',(0.,0.,1.)); +#423904 = DIRECTION('',(-0.,-1.,0.)); +#423905 = CYLINDRICAL_SURFACE('',#423906,0.15); +#423906 = AXIS2_PLACEMENT_3D('',#423907,#423908,#423909); +#423907 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.5E-02)); +#423908 = DIRECTION('',(-0.,-0.,-1.)); +#423909 = DIRECTION('',(-0.,-1.,0.)); +#423910 = ADVANCED_FACE('',(#423911,#423914),#423925,.F.); +#423911 = FACE_BOUND('',#423912,.F.); +#423912 = EDGE_LOOP('',(#423913)); +#423913 = ORIENTED_EDGE('',*,*,#423899,.T.); +#423914 = FACE_BOUND('',#423915,.F.); +#423915 = EDGE_LOOP('',(#423916)); +#423916 = ORIENTED_EDGE('',*,*,#423917,.T.); +#423917 = EDGE_CURVE('',#423918,#423918,#423920,.T.); +#423918 = VERTEX_POINT('',#423919); +#423919 = CARTESIAN_POINT('',(139.342332,-122.682668,-3.5E-02)); +#423920 = CIRCLE('',#423921,0.125); +#423921 = AXIS2_PLACEMENT_3D('',#423922,#423923,#423924); +#423922 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.5E-02)); +#423923 = DIRECTION('',(-0.,0.,-1.)); +#423924 = DIRECTION('',(-0.,-1.,0.)); +#423925 = PLANE('',#423926); +#423926 = AXIS2_PLACEMENT_3D('',#423927,#423928,#423929); +#423927 = CARTESIAN_POINT('',(139.342332,-122.707668,-3.5E-02)); +#423928 = DIRECTION('',(0.,0.,1.)); +#423929 = DIRECTION('',(1.,0.,-0.)); +#423930 = ADVANCED_FACE('',(#423931,#423934),#423945,.T.); +#423931 = FACE_BOUND('',#423932,.T.); +#423932 = EDGE_LOOP('',(#423933)); +#423933 = ORIENTED_EDGE('',*,*,#423891,.T.); +#423934 = FACE_BOUND('',#423935,.T.); +#423935 = EDGE_LOOP('',(#423936)); +#423936 = ORIENTED_EDGE('',*,*,#423937,.T.); +#423937 = EDGE_CURVE('',#423938,#423938,#423940,.T.); +#423938 = VERTEX_POINT('',#423939); +#423939 = CARTESIAN_POINT('',(139.342332,-122.682668,1.545)); +#423940 = CIRCLE('',#423941,0.125); +#423941 = AXIS2_PLACEMENT_3D('',#423942,#423943,#423944); +#423942 = CARTESIAN_POINT('',(139.342332,-122.557668,1.545)); +#423943 = DIRECTION('',(-0.,0.,-1.)); +#423944 = DIRECTION('',(-0.,-1.,0.)); +#423945 = PLANE('',#423946); +#423946 = AXIS2_PLACEMENT_3D('',#423947,#423948,#423949); +#423947 = CARTESIAN_POINT('',(139.342332,-122.707668,1.545)); +#423948 = DIRECTION('',(0.,0.,1.)); +#423949 = DIRECTION('',(1.,0.,-0.)); +#423950 = ADVANCED_FACE('',(#423951),#423962,.F.); +#423951 = FACE_BOUND('',#423952,.T.); +#423952 = EDGE_LOOP('',(#423953,#423954,#423960,#423961)); +#423953 = ORIENTED_EDGE('',*,*,#423917,.T.); +#423954 = ORIENTED_EDGE('',*,*,#423955,.T.); +#423955 = EDGE_CURVE('',#423918,#423938,#423956,.T.); +#423956 = LINE('',#423957,#423958); +#423957 = CARTESIAN_POINT('',(139.342332,-122.682668,-3.6E-02)); +#423958 = VECTOR('',#423959,1.); +#423959 = DIRECTION('',(0.,0.,1.)); +#423960 = ORIENTED_EDGE('',*,*,#423937,.F.); +#423961 = ORIENTED_EDGE('',*,*,#423955,.F.); +#423962 = CYLINDRICAL_SURFACE('',#423963,0.125); +#423963 = AXIS2_PLACEMENT_3D('',#423964,#423965,#423966); +#423964 = CARTESIAN_POINT('',(139.342332,-122.557668,-3.6E-02)); +#423965 = DIRECTION('',(-0.,-0.,-1.)); +#423966 = DIRECTION('',(-0.,-1.,0.)); +#423967 = MANIFOLD_SOLID_BREP('',#423968); +#423968 = CLOSED_SHELL('',(#423969,#424002,#424022,#424042)); +#423969 = ADVANCED_FACE('',(#423970),#423997,.T.); +#423970 = FACE_BOUND('',#423971,.F.); +#423971 = EDGE_LOOP('',(#423972,#423982,#423989,#423990)); +#423972 = ORIENTED_EDGE('',*,*,#423973,.T.); +#423973 = EDGE_CURVE('',#423974,#423976,#423978,.T.); +#423974 = VERTEX_POINT('',#423975); +#423975 = CARTESIAN_POINT('',(122.5,-107.65,-3.5E-02)); +#423976 = VERTEX_POINT('',#423977); +#423977 = CARTESIAN_POINT('',(122.5,-107.65,1.545)); +#423978 = LINE('',#423979,#423980); +#423979 = CARTESIAN_POINT('',(122.5,-107.65,-3.5E-02)); +#423980 = VECTOR('',#423981,1.); +#423981 = DIRECTION('',(0.,0.,1.)); +#423982 = ORIENTED_EDGE('',*,*,#423983,.T.); +#423983 = EDGE_CURVE('',#423976,#423976,#423984,.T.); +#423984 = CIRCLE('',#423985,0.15); +#423985 = AXIS2_PLACEMENT_3D('',#423986,#423987,#423988); +#423986 = CARTESIAN_POINT('',(122.5,-107.5,1.545)); +#423987 = DIRECTION('',(0.,0.,1.)); +#423988 = DIRECTION('',(-0.,-1.,0.)); +#423989 = ORIENTED_EDGE('',*,*,#423973,.F.); +#423990 = ORIENTED_EDGE('',*,*,#423991,.F.); +#423991 = EDGE_CURVE('',#423974,#423974,#423992,.T.); +#423992 = CIRCLE('',#423993,0.15); +#423993 = AXIS2_PLACEMENT_3D('',#423994,#423995,#423996); +#423994 = CARTESIAN_POINT('',(122.5,-107.5,-3.5E-02)); +#423995 = DIRECTION('',(0.,0.,1.)); +#423996 = DIRECTION('',(-0.,-1.,0.)); +#423997 = CYLINDRICAL_SURFACE('',#423998,0.15); +#423998 = AXIS2_PLACEMENT_3D('',#423999,#424000,#424001); +#423999 = CARTESIAN_POINT('',(122.5,-107.5,-3.5E-02)); +#424000 = DIRECTION('',(-0.,-0.,-1.)); +#424001 = DIRECTION('',(-0.,-1.,0.)); +#424002 = ADVANCED_FACE('',(#424003,#424006),#424017,.F.); +#424003 = FACE_BOUND('',#424004,.F.); +#424004 = EDGE_LOOP('',(#424005)); +#424005 = ORIENTED_EDGE('',*,*,#423991,.T.); +#424006 = FACE_BOUND('',#424007,.F.); +#424007 = EDGE_LOOP('',(#424008)); +#424008 = ORIENTED_EDGE('',*,*,#424009,.T.); +#424009 = EDGE_CURVE('',#424010,#424010,#424012,.T.); +#424010 = VERTEX_POINT('',#424011); +#424011 = CARTESIAN_POINT('',(122.5,-107.625,-3.5E-02)); +#424012 = CIRCLE('',#424013,0.125); +#424013 = AXIS2_PLACEMENT_3D('',#424014,#424015,#424016); +#424014 = CARTESIAN_POINT('',(122.5,-107.5,-3.5E-02)); +#424015 = DIRECTION('',(-0.,0.,-1.)); +#424016 = DIRECTION('',(-0.,-1.,0.)); +#424017 = PLANE('',#424018); +#424018 = AXIS2_PLACEMENT_3D('',#424019,#424020,#424021); +#424019 = CARTESIAN_POINT('',(122.5,-107.65,-3.5E-02)); +#424020 = DIRECTION('',(0.,0.,1.)); +#424021 = DIRECTION('',(1.,0.,-0.)); +#424022 = ADVANCED_FACE('',(#424023,#424026),#424037,.T.); +#424023 = FACE_BOUND('',#424024,.T.); +#424024 = EDGE_LOOP('',(#424025)); +#424025 = ORIENTED_EDGE('',*,*,#423983,.T.); +#424026 = FACE_BOUND('',#424027,.T.); +#424027 = EDGE_LOOP('',(#424028)); +#424028 = ORIENTED_EDGE('',*,*,#424029,.T.); +#424029 = EDGE_CURVE('',#424030,#424030,#424032,.T.); +#424030 = VERTEX_POINT('',#424031); +#424031 = CARTESIAN_POINT('',(122.5,-107.625,1.545)); +#424032 = CIRCLE('',#424033,0.125); +#424033 = AXIS2_PLACEMENT_3D('',#424034,#424035,#424036); +#424034 = CARTESIAN_POINT('',(122.5,-107.5,1.545)); +#424035 = DIRECTION('',(-0.,0.,-1.)); +#424036 = DIRECTION('',(-0.,-1.,0.)); +#424037 = PLANE('',#424038); +#424038 = AXIS2_PLACEMENT_3D('',#424039,#424040,#424041); +#424039 = CARTESIAN_POINT('',(122.5,-107.65,1.545)); +#424040 = DIRECTION('',(0.,0.,1.)); +#424041 = DIRECTION('',(1.,0.,-0.)); +#424042 = ADVANCED_FACE('',(#424043),#424054,.F.); +#424043 = FACE_BOUND('',#424044,.T.); +#424044 = EDGE_LOOP('',(#424045,#424046,#424052,#424053)); +#424045 = ORIENTED_EDGE('',*,*,#424009,.T.); +#424046 = ORIENTED_EDGE('',*,*,#424047,.T.); +#424047 = EDGE_CURVE('',#424010,#424030,#424048,.T.); +#424048 = LINE('',#424049,#424050); +#424049 = CARTESIAN_POINT('',(122.5,-107.625,-3.6E-02)); +#424050 = VECTOR('',#424051,1.); +#424051 = DIRECTION('',(0.,0.,1.)); +#424052 = ORIENTED_EDGE('',*,*,#424029,.F.); +#424053 = ORIENTED_EDGE('',*,*,#424047,.F.); +#424054 = CYLINDRICAL_SURFACE('',#424055,0.125); +#424055 = AXIS2_PLACEMENT_3D('',#424056,#424057,#424058); +#424056 = CARTESIAN_POINT('',(122.5,-107.5,-3.6E-02)); +#424057 = DIRECTION('',(-0.,-0.,-1.)); +#424058 = DIRECTION('',(-0.,-1.,0.)); +#424059 = MANIFOLD_SOLID_BREP('',#424060); +#424060 = CLOSED_SHELL('',(#424061,#424094,#424114,#424134)); +#424061 = ADVANCED_FACE('',(#424062),#424089,.T.); +#424062 = FACE_BOUND('',#424063,.F.); +#424063 = EDGE_LOOP('',(#424064,#424074,#424081,#424082)); +#424064 = ORIENTED_EDGE('',*,*,#424065,.T.); +#424065 = EDGE_CURVE('',#424066,#424068,#424070,.T.); +#424066 = VERTEX_POINT('',#424067); +#424067 = CARTESIAN_POINT('',(127.11,-120.55,-3.5E-02)); +#424068 = VERTEX_POINT('',#424069); +#424069 = CARTESIAN_POINT('',(127.11,-120.55,1.545)); +#424070 = LINE('',#424071,#424072); +#424071 = CARTESIAN_POINT('',(127.11,-120.55,-3.5E-02)); +#424072 = VECTOR('',#424073,1.); +#424073 = DIRECTION('',(0.,0.,1.)); +#424074 = ORIENTED_EDGE('',*,*,#424075,.T.); +#424075 = EDGE_CURVE('',#424068,#424068,#424076,.T.); +#424076 = CIRCLE('',#424077,0.15); +#424077 = AXIS2_PLACEMENT_3D('',#424078,#424079,#424080); +#424078 = CARTESIAN_POINT('',(127.11,-120.4,1.545)); +#424079 = DIRECTION('',(0.,0.,1.)); +#424080 = DIRECTION('',(-0.,-1.,0.)); +#424081 = ORIENTED_EDGE('',*,*,#424065,.F.); +#424082 = ORIENTED_EDGE('',*,*,#424083,.F.); +#424083 = EDGE_CURVE('',#424066,#424066,#424084,.T.); +#424084 = CIRCLE('',#424085,0.15); +#424085 = AXIS2_PLACEMENT_3D('',#424086,#424087,#424088); +#424086 = CARTESIAN_POINT('',(127.11,-120.4,-3.5E-02)); +#424087 = DIRECTION('',(0.,0.,1.)); +#424088 = DIRECTION('',(-0.,-1.,0.)); +#424089 = CYLINDRICAL_SURFACE('',#424090,0.15); +#424090 = AXIS2_PLACEMENT_3D('',#424091,#424092,#424093); +#424091 = CARTESIAN_POINT('',(127.11,-120.4,-3.5E-02)); +#424092 = DIRECTION('',(-0.,-0.,-1.)); +#424093 = DIRECTION('',(-0.,-1.,0.)); +#424094 = ADVANCED_FACE('',(#424095,#424098),#424109,.F.); +#424095 = FACE_BOUND('',#424096,.F.); +#424096 = EDGE_LOOP('',(#424097)); +#424097 = ORIENTED_EDGE('',*,*,#424083,.T.); +#424098 = FACE_BOUND('',#424099,.F.); +#424099 = EDGE_LOOP('',(#424100)); +#424100 = ORIENTED_EDGE('',*,*,#424101,.T.); +#424101 = EDGE_CURVE('',#424102,#424102,#424104,.T.); +#424102 = VERTEX_POINT('',#424103); +#424103 = CARTESIAN_POINT('',(127.11,-120.525,-3.5E-02)); +#424104 = CIRCLE('',#424105,0.125); +#424105 = AXIS2_PLACEMENT_3D('',#424106,#424107,#424108); +#424106 = CARTESIAN_POINT('',(127.11,-120.4,-3.5E-02)); +#424107 = DIRECTION('',(-0.,0.,-1.)); +#424108 = DIRECTION('',(-0.,-1.,0.)); +#424109 = PLANE('',#424110); +#424110 = AXIS2_PLACEMENT_3D('',#424111,#424112,#424113); +#424111 = CARTESIAN_POINT('',(127.11,-120.55,-3.5E-02)); +#424112 = DIRECTION('',(0.,0.,1.)); +#424113 = DIRECTION('',(1.,0.,-0.)); +#424114 = ADVANCED_FACE('',(#424115,#424118),#424129,.T.); +#424115 = FACE_BOUND('',#424116,.T.); +#424116 = EDGE_LOOP('',(#424117)); +#424117 = ORIENTED_EDGE('',*,*,#424075,.T.); +#424118 = FACE_BOUND('',#424119,.T.); +#424119 = EDGE_LOOP('',(#424120)); +#424120 = ORIENTED_EDGE('',*,*,#424121,.T.); +#424121 = EDGE_CURVE('',#424122,#424122,#424124,.T.); +#424122 = VERTEX_POINT('',#424123); +#424123 = CARTESIAN_POINT('',(127.11,-120.525,1.545)); +#424124 = CIRCLE('',#424125,0.125); +#424125 = AXIS2_PLACEMENT_3D('',#424126,#424127,#424128); +#424126 = CARTESIAN_POINT('',(127.11,-120.4,1.545)); +#424127 = DIRECTION('',(-0.,0.,-1.)); +#424128 = DIRECTION('',(-0.,-1.,0.)); +#424129 = PLANE('',#424130); +#424130 = AXIS2_PLACEMENT_3D('',#424131,#424132,#424133); +#424131 = CARTESIAN_POINT('',(127.11,-120.55,1.545)); +#424132 = DIRECTION('',(0.,0.,1.)); +#424133 = DIRECTION('',(1.,0.,-0.)); +#424134 = ADVANCED_FACE('',(#424135),#424146,.F.); +#424135 = FACE_BOUND('',#424136,.T.); +#424136 = EDGE_LOOP('',(#424137,#424138,#424144,#424145)); +#424137 = ORIENTED_EDGE('',*,*,#424101,.T.); +#424138 = ORIENTED_EDGE('',*,*,#424139,.T.); +#424139 = EDGE_CURVE('',#424102,#424122,#424140,.T.); +#424140 = LINE('',#424141,#424142); +#424141 = CARTESIAN_POINT('',(127.11,-120.525,-3.6E-02)); +#424142 = VECTOR('',#424143,1.); +#424143 = DIRECTION('',(0.,0.,1.)); +#424144 = ORIENTED_EDGE('',*,*,#424121,.F.); +#424145 = ORIENTED_EDGE('',*,*,#424139,.F.); +#424146 = CYLINDRICAL_SURFACE('',#424147,0.125); +#424147 = AXIS2_PLACEMENT_3D('',#424148,#424149,#424150); +#424148 = CARTESIAN_POINT('',(127.11,-120.4,-3.6E-02)); +#424149 = DIRECTION('',(-0.,-0.,-1.)); +#424150 = DIRECTION('',(-0.,-1.,0.)); +#424151 = MANIFOLD_SOLID_BREP('',#424152); +#424152 = CLOSED_SHELL('',(#424153,#424186,#424206,#424226)); +#424153 = ADVANCED_FACE('',(#424154),#424181,.T.); +#424154 = FACE_BOUND('',#424155,.F.); +#424155 = EDGE_LOOP('',(#424156,#424166,#424173,#424174)); +#424156 = ORIENTED_EDGE('',*,*,#424157,.T.); +#424157 = EDGE_CURVE('',#424158,#424160,#424162,.T.); +#424158 = VERTEX_POINT('',#424159); +#424159 = CARTESIAN_POINT('',(151.5,-153.15,-3.5E-02)); +#424160 = VERTEX_POINT('',#424161); +#424161 = CARTESIAN_POINT('',(151.5,-153.15,1.545)); +#424162 = LINE('',#424163,#424164); +#424163 = CARTESIAN_POINT('',(151.5,-153.15,-3.5E-02)); +#424164 = VECTOR('',#424165,1.); +#424165 = DIRECTION('',(0.,0.,1.)); +#424166 = ORIENTED_EDGE('',*,*,#424167,.T.); +#424167 = EDGE_CURVE('',#424160,#424160,#424168,.T.); +#424168 = CIRCLE('',#424169,0.15); +#424169 = AXIS2_PLACEMENT_3D('',#424170,#424171,#424172); +#424170 = CARTESIAN_POINT('',(151.5,-153.,1.545)); +#424171 = DIRECTION('',(0.,0.,1.)); +#424172 = DIRECTION('',(-0.,-1.,0.)); +#424173 = ORIENTED_EDGE('',*,*,#424157,.F.); +#424174 = ORIENTED_EDGE('',*,*,#424175,.F.); +#424175 = EDGE_CURVE('',#424158,#424158,#424176,.T.); +#424176 = CIRCLE('',#424177,0.15); +#424177 = AXIS2_PLACEMENT_3D('',#424178,#424179,#424180); +#424178 = CARTESIAN_POINT('',(151.5,-153.,-3.5E-02)); +#424179 = DIRECTION('',(0.,0.,1.)); +#424180 = DIRECTION('',(-0.,-1.,0.)); +#424181 = CYLINDRICAL_SURFACE('',#424182,0.15); +#424182 = AXIS2_PLACEMENT_3D('',#424183,#424184,#424185); +#424183 = CARTESIAN_POINT('',(151.5,-153.,-3.5E-02)); +#424184 = DIRECTION('',(-0.,-0.,-1.)); +#424185 = DIRECTION('',(-0.,-1.,0.)); +#424186 = ADVANCED_FACE('',(#424187,#424190),#424201,.F.); +#424187 = FACE_BOUND('',#424188,.F.); +#424188 = EDGE_LOOP('',(#424189)); +#424189 = ORIENTED_EDGE('',*,*,#424175,.T.); +#424190 = FACE_BOUND('',#424191,.F.); +#424191 = EDGE_LOOP('',(#424192)); +#424192 = ORIENTED_EDGE('',*,*,#424193,.T.); +#424193 = EDGE_CURVE('',#424194,#424194,#424196,.T.); +#424194 = VERTEX_POINT('',#424195); +#424195 = CARTESIAN_POINT('',(151.5,-153.125,-3.5E-02)); +#424196 = CIRCLE('',#424197,0.125); +#424197 = AXIS2_PLACEMENT_3D('',#424198,#424199,#424200); +#424198 = CARTESIAN_POINT('',(151.5,-153.,-3.5E-02)); +#424199 = DIRECTION('',(-0.,0.,-1.)); +#424200 = DIRECTION('',(-0.,-1.,0.)); +#424201 = PLANE('',#424202); +#424202 = AXIS2_PLACEMENT_3D('',#424203,#424204,#424205); +#424203 = CARTESIAN_POINT('',(151.5,-153.15,-3.5E-02)); +#424204 = DIRECTION('',(0.,0.,1.)); +#424205 = DIRECTION('',(1.,0.,-0.)); +#424206 = ADVANCED_FACE('',(#424207,#424210),#424221,.T.); +#424207 = FACE_BOUND('',#424208,.T.); +#424208 = EDGE_LOOP('',(#424209)); +#424209 = ORIENTED_EDGE('',*,*,#424167,.T.); +#424210 = FACE_BOUND('',#424211,.T.); +#424211 = EDGE_LOOP('',(#424212)); +#424212 = ORIENTED_EDGE('',*,*,#424213,.T.); +#424213 = EDGE_CURVE('',#424214,#424214,#424216,.T.); +#424214 = VERTEX_POINT('',#424215); +#424215 = CARTESIAN_POINT('',(151.5,-153.125,1.545)); +#424216 = CIRCLE('',#424217,0.125); +#424217 = AXIS2_PLACEMENT_3D('',#424218,#424219,#424220); +#424218 = CARTESIAN_POINT('',(151.5,-153.,1.545)); +#424219 = DIRECTION('',(-0.,0.,-1.)); +#424220 = DIRECTION('',(-0.,-1.,0.)); +#424221 = PLANE('',#424222); +#424222 = AXIS2_PLACEMENT_3D('',#424223,#424224,#424225); +#424223 = CARTESIAN_POINT('',(151.5,-153.15,1.545)); +#424224 = DIRECTION('',(0.,0.,1.)); +#424225 = DIRECTION('',(1.,0.,-0.)); +#424226 = ADVANCED_FACE('',(#424227),#424238,.F.); +#424227 = FACE_BOUND('',#424228,.T.); +#424228 = EDGE_LOOP('',(#424229,#424230,#424236,#424237)); +#424229 = ORIENTED_EDGE('',*,*,#424193,.T.); +#424230 = ORIENTED_EDGE('',*,*,#424231,.T.); +#424231 = EDGE_CURVE('',#424194,#424214,#424232,.T.); +#424232 = LINE('',#424233,#424234); +#424233 = CARTESIAN_POINT('',(151.5,-153.125,-3.6E-02)); +#424234 = VECTOR('',#424235,1.); +#424235 = DIRECTION('',(0.,0.,1.)); +#424236 = ORIENTED_EDGE('',*,*,#424213,.F.); +#424237 = ORIENTED_EDGE('',*,*,#424231,.F.); +#424238 = CYLINDRICAL_SURFACE('',#424239,0.125); +#424239 = AXIS2_PLACEMENT_3D('',#424240,#424241,#424242); +#424240 = CARTESIAN_POINT('',(151.5,-153.,-3.6E-02)); +#424241 = DIRECTION('',(-0.,-0.,-1.)); +#424242 = DIRECTION('',(-0.,-1.,0.)); +#424243 = MANIFOLD_SOLID_BREP('',#424244); +#424244 = CLOSED_SHELL('',(#424245,#424278,#424298,#424318)); +#424245 = ADVANCED_FACE('',(#424246),#424273,.T.); +#424246 = FACE_BOUND('',#424247,.F.); +#424247 = EDGE_LOOP('',(#424248,#424258,#424265,#424266)); +#424248 = ORIENTED_EDGE('',*,*,#424249,.T.); +#424249 = EDGE_CURVE('',#424250,#424252,#424254,.T.); +#424250 = VERTEX_POINT('',#424251); +#424251 = CARTESIAN_POINT('',(122.6,-86.45,-3.5E-02)); +#424252 = VERTEX_POINT('',#424253); +#424253 = CARTESIAN_POINT('',(122.6,-86.45,1.545)); +#424254 = LINE('',#424255,#424256); +#424255 = CARTESIAN_POINT('',(122.6,-86.45,-3.5E-02)); +#424256 = VECTOR('',#424257,1.); +#424257 = DIRECTION('',(0.,0.,1.)); +#424258 = ORIENTED_EDGE('',*,*,#424259,.T.); +#424259 = EDGE_CURVE('',#424252,#424252,#424260,.T.); +#424260 = CIRCLE('',#424261,0.15); +#424261 = AXIS2_PLACEMENT_3D('',#424262,#424263,#424264); +#424262 = CARTESIAN_POINT('',(122.6,-86.3,1.545)); +#424263 = DIRECTION('',(0.,0.,1.)); +#424264 = DIRECTION('',(-0.,-1.,0.)); +#424265 = ORIENTED_EDGE('',*,*,#424249,.F.); +#424266 = ORIENTED_EDGE('',*,*,#424267,.F.); +#424267 = EDGE_CURVE('',#424250,#424250,#424268,.T.); +#424268 = CIRCLE('',#424269,0.15); +#424269 = AXIS2_PLACEMENT_3D('',#424270,#424271,#424272); +#424270 = CARTESIAN_POINT('',(122.6,-86.3,-3.5E-02)); +#424271 = DIRECTION('',(0.,0.,1.)); +#424272 = DIRECTION('',(-0.,-1.,0.)); +#424273 = CYLINDRICAL_SURFACE('',#424274,0.15); +#424274 = AXIS2_PLACEMENT_3D('',#424275,#424276,#424277); +#424275 = CARTESIAN_POINT('',(122.6,-86.3,-3.5E-02)); +#424276 = DIRECTION('',(-0.,-0.,-1.)); +#424277 = DIRECTION('',(-0.,-1.,0.)); +#424278 = ADVANCED_FACE('',(#424279,#424282),#424293,.F.); +#424279 = FACE_BOUND('',#424280,.F.); +#424280 = EDGE_LOOP('',(#424281)); +#424281 = ORIENTED_EDGE('',*,*,#424267,.T.); +#424282 = FACE_BOUND('',#424283,.F.); +#424283 = EDGE_LOOP('',(#424284)); +#424284 = ORIENTED_EDGE('',*,*,#424285,.T.); +#424285 = EDGE_CURVE('',#424286,#424286,#424288,.T.); +#424286 = VERTEX_POINT('',#424287); +#424287 = CARTESIAN_POINT('',(122.6,-86.425,-3.5E-02)); +#424288 = CIRCLE('',#424289,0.125); +#424289 = AXIS2_PLACEMENT_3D('',#424290,#424291,#424292); +#424290 = CARTESIAN_POINT('',(122.6,-86.3,-3.5E-02)); +#424291 = DIRECTION('',(-0.,0.,-1.)); +#424292 = DIRECTION('',(-0.,-1.,0.)); +#424293 = PLANE('',#424294); +#424294 = AXIS2_PLACEMENT_3D('',#424295,#424296,#424297); +#424295 = CARTESIAN_POINT('',(122.6,-86.45,-3.5E-02)); +#424296 = DIRECTION('',(0.,0.,1.)); +#424297 = DIRECTION('',(1.,0.,-0.)); +#424298 = ADVANCED_FACE('',(#424299,#424302),#424313,.T.); +#424299 = FACE_BOUND('',#424300,.T.); +#424300 = EDGE_LOOP('',(#424301)); +#424301 = ORIENTED_EDGE('',*,*,#424259,.T.); +#424302 = FACE_BOUND('',#424303,.T.); +#424303 = EDGE_LOOP('',(#424304)); +#424304 = ORIENTED_EDGE('',*,*,#424305,.T.); +#424305 = EDGE_CURVE('',#424306,#424306,#424308,.T.); +#424306 = VERTEX_POINT('',#424307); +#424307 = CARTESIAN_POINT('',(122.6,-86.425,1.545)); +#424308 = CIRCLE('',#424309,0.125); +#424309 = AXIS2_PLACEMENT_3D('',#424310,#424311,#424312); +#424310 = CARTESIAN_POINT('',(122.6,-86.3,1.545)); +#424311 = DIRECTION('',(-0.,0.,-1.)); +#424312 = DIRECTION('',(-0.,-1.,0.)); +#424313 = PLANE('',#424314); +#424314 = AXIS2_PLACEMENT_3D('',#424315,#424316,#424317); +#424315 = CARTESIAN_POINT('',(122.6,-86.45,1.545)); +#424316 = DIRECTION('',(0.,0.,1.)); +#424317 = DIRECTION('',(1.,0.,-0.)); +#424318 = ADVANCED_FACE('',(#424319),#424330,.F.); +#424319 = FACE_BOUND('',#424320,.T.); +#424320 = EDGE_LOOP('',(#424321,#424322,#424328,#424329)); +#424321 = ORIENTED_EDGE('',*,*,#424285,.T.); +#424322 = ORIENTED_EDGE('',*,*,#424323,.T.); +#424323 = EDGE_CURVE('',#424286,#424306,#424324,.T.); +#424324 = LINE('',#424325,#424326); +#424325 = CARTESIAN_POINT('',(122.6,-86.425,-3.6E-02)); +#424326 = VECTOR('',#424327,1.); +#424327 = DIRECTION('',(0.,0.,1.)); +#424328 = ORIENTED_EDGE('',*,*,#424305,.F.); +#424329 = ORIENTED_EDGE('',*,*,#424323,.F.); +#424330 = CYLINDRICAL_SURFACE('',#424331,0.125); +#424331 = AXIS2_PLACEMENT_3D('',#424332,#424333,#424334); +#424332 = CARTESIAN_POINT('',(122.6,-86.3,-3.6E-02)); +#424333 = DIRECTION('',(-0.,-0.,-1.)); +#424334 = DIRECTION('',(-0.,-1.,0.)); +#424335 = MANIFOLD_SOLID_BREP('',#424336); +#424336 = CLOSED_SHELL('',(#424337,#424370,#424390,#424410)); +#424337 = ADVANCED_FACE('',(#424338),#424365,.T.); +#424338 = FACE_BOUND('',#424339,.F.); +#424339 = EDGE_LOOP('',(#424340,#424350,#424357,#424358)); +#424340 = ORIENTED_EDGE('',*,*,#424341,.T.); +#424341 = EDGE_CURVE('',#424342,#424344,#424346,.T.); +#424342 = VERTEX_POINT('',#424343); +#424343 = CARTESIAN_POINT('',(135.5,-88.15,-3.5E-02)); +#424344 = VERTEX_POINT('',#424345); +#424345 = CARTESIAN_POINT('',(135.5,-88.15,1.545)); +#424346 = LINE('',#424347,#424348); +#424347 = CARTESIAN_POINT('',(135.5,-88.15,-3.5E-02)); +#424348 = VECTOR('',#424349,1.); +#424349 = DIRECTION('',(0.,0.,1.)); +#424350 = ORIENTED_EDGE('',*,*,#424351,.T.); +#424351 = EDGE_CURVE('',#424344,#424344,#424352,.T.); +#424352 = CIRCLE('',#424353,0.15); +#424353 = AXIS2_PLACEMENT_3D('',#424354,#424355,#424356); +#424354 = CARTESIAN_POINT('',(135.5,-88.,1.545)); +#424355 = DIRECTION('',(0.,0.,1.)); +#424356 = DIRECTION('',(-0.,-1.,0.)); +#424357 = ORIENTED_EDGE('',*,*,#424341,.F.); +#424358 = ORIENTED_EDGE('',*,*,#424359,.F.); +#424359 = EDGE_CURVE('',#424342,#424342,#424360,.T.); +#424360 = CIRCLE('',#424361,0.15); +#424361 = AXIS2_PLACEMENT_3D('',#424362,#424363,#424364); +#424362 = CARTESIAN_POINT('',(135.5,-88.,-3.5E-02)); +#424363 = DIRECTION('',(0.,0.,1.)); +#424364 = DIRECTION('',(-0.,-1.,0.)); +#424365 = CYLINDRICAL_SURFACE('',#424366,0.15); +#424366 = AXIS2_PLACEMENT_3D('',#424367,#424368,#424369); +#424367 = CARTESIAN_POINT('',(135.5,-88.,-3.5E-02)); +#424368 = DIRECTION('',(-0.,-0.,-1.)); +#424369 = DIRECTION('',(-0.,-1.,0.)); +#424370 = ADVANCED_FACE('',(#424371,#424374),#424385,.F.); +#424371 = FACE_BOUND('',#424372,.F.); +#424372 = EDGE_LOOP('',(#424373)); +#424373 = ORIENTED_EDGE('',*,*,#424359,.T.); +#424374 = FACE_BOUND('',#424375,.F.); +#424375 = EDGE_LOOP('',(#424376)); +#424376 = ORIENTED_EDGE('',*,*,#424377,.T.); +#424377 = EDGE_CURVE('',#424378,#424378,#424380,.T.); +#424378 = VERTEX_POINT('',#424379); +#424379 = CARTESIAN_POINT('',(135.5,-88.125,-3.5E-02)); +#424380 = CIRCLE('',#424381,0.125); +#424381 = AXIS2_PLACEMENT_3D('',#424382,#424383,#424384); +#424382 = CARTESIAN_POINT('',(135.5,-88.,-3.5E-02)); +#424383 = DIRECTION('',(-0.,0.,-1.)); +#424384 = DIRECTION('',(-0.,-1.,0.)); +#424385 = PLANE('',#424386); +#424386 = AXIS2_PLACEMENT_3D('',#424387,#424388,#424389); +#424387 = CARTESIAN_POINT('',(135.5,-88.15,-3.5E-02)); +#424388 = DIRECTION('',(0.,0.,1.)); +#424389 = DIRECTION('',(1.,0.,-0.)); +#424390 = ADVANCED_FACE('',(#424391,#424394),#424405,.T.); +#424391 = FACE_BOUND('',#424392,.T.); +#424392 = EDGE_LOOP('',(#424393)); +#424393 = ORIENTED_EDGE('',*,*,#424351,.T.); +#424394 = FACE_BOUND('',#424395,.T.); +#424395 = EDGE_LOOP('',(#424396)); +#424396 = ORIENTED_EDGE('',*,*,#424397,.T.); +#424397 = EDGE_CURVE('',#424398,#424398,#424400,.T.); +#424398 = VERTEX_POINT('',#424399); +#424399 = CARTESIAN_POINT('',(135.5,-88.125,1.545)); +#424400 = CIRCLE('',#424401,0.125); +#424401 = AXIS2_PLACEMENT_3D('',#424402,#424403,#424404); +#424402 = CARTESIAN_POINT('',(135.5,-88.,1.545)); +#424403 = DIRECTION('',(-0.,0.,-1.)); +#424404 = DIRECTION('',(-0.,-1.,0.)); +#424405 = PLANE('',#424406); +#424406 = AXIS2_PLACEMENT_3D('',#424407,#424408,#424409); +#424407 = CARTESIAN_POINT('',(135.5,-88.15,1.545)); +#424408 = DIRECTION('',(0.,0.,1.)); +#424409 = DIRECTION('',(1.,0.,-0.)); +#424410 = ADVANCED_FACE('',(#424411),#424422,.F.); +#424411 = FACE_BOUND('',#424412,.T.); +#424412 = EDGE_LOOP('',(#424413,#424414,#424420,#424421)); +#424413 = ORIENTED_EDGE('',*,*,#424377,.T.); +#424414 = ORIENTED_EDGE('',*,*,#424415,.T.); +#424415 = EDGE_CURVE('',#424378,#424398,#424416,.T.); +#424416 = LINE('',#424417,#424418); +#424417 = CARTESIAN_POINT('',(135.5,-88.125,-3.6E-02)); +#424418 = VECTOR('',#424419,1.); +#424419 = DIRECTION('',(0.,0.,1.)); +#424420 = ORIENTED_EDGE('',*,*,#424397,.F.); +#424421 = ORIENTED_EDGE('',*,*,#424415,.F.); +#424422 = CYLINDRICAL_SURFACE('',#424423,0.125); +#424423 = AXIS2_PLACEMENT_3D('',#424424,#424425,#424426); +#424424 = CARTESIAN_POINT('',(135.5,-88.,-3.6E-02)); +#424425 = DIRECTION('',(-0.,-0.,-1.)); +#424426 = DIRECTION('',(-0.,-1.,0.)); +#424427 = MANIFOLD_SOLID_BREP('',#424428); +#424428 = CLOSED_SHELL('',(#424429,#424462,#424482,#424502)); +#424429 = ADVANCED_FACE('',(#424430),#424457,.T.); +#424430 = FACE_BOUND('',#424431,.F.); +#424431 = EDGE_LOOP('',(#424432,#424442,#424449,#424450)); +#424432 = ORIENTED_EDGE('',*,*,#424433,.T.); +#424433 = EDGE_CURVE('',#424434,#424436,#424438,.T.); +#424434 = VERTEX_POINT('',#424435); +#424435 = CARTESIAN_POINT('',(149.55,-133.1,-3.5E-02)); +#424436 = VERTEX_POINT('',#424437); +#424437 = CARTESIAN_POINT('',(149.55,-133.1,1.545)); +#424438 = LINE('',#424439,#424440); +#424439 = CARTESIAN_POINT('',(149.55,-133.1,-3.5E-02)); +#424440 = VECTOR('',#424441,1.); +#424441 = DIRECTION('',(0.,0.,1.)); +#424442 = ORIENTED_EDGE('',*,*,#424443,.T.); +#424443 = EDGE_CURVE('',#424436,#424436,#424444,.T.); +#424444 = CIRCLE('',#424445,0.15); +#424445 = AXIS2_PLACEMENT_3D('',#424446,#424447,#424448); +#424446 = CARTESIAN_POINT('',(149.55,-132.95,1.545)); +#424447 = DIRECTION('',(0.,0.,1.)); +#424448 = DIRECTION('',(-0.,-1.,0.)); +#424449 = ORIENTED_EDGE('',*,*,#424433,.F.); +#424450 = ORIENTED_EDGE('',*,*,#424451,.F.); +#424451 = EDGE_CURVE('',#424434,#424434,#424452,.T.); +#424452 = CIRCLE('',#424453,0.15); +#424453 = AXIS2_PLACEMENT_3D('',#424454,#424455,#424456); +#424454 = CARTESIAN_POINT('',(149.55,-132.95,-3.5E-02)); +#424455 = DIRECTION('',(0.,0.,1.)); +#424456 = DIRECTION('',(-0.,-1.,0.)); +#424457 = CYLINDRICAL_SURFACE('',#424458,0.15); +#424458 = AXIS2_PLACEMENT_3D('',#424459,#424460,#424461); +#424459 = CARTESIAN_POINT('',(149.55,-132.95,-3.5E-02)); +#424460 = DIRECTION('',(-0.,-0.,-1.)); +#424461 = DIRECTION('',(-0.,-1.,0.)); +#424462 = ADVANCED_FACE('',(#424463,#424466),#424477,.F.); +#424463 = FACE_BOUND('',#424464,.F.); +#424464 = EDGE_LOOP('',(#424465)); +#424465 = ORIENTED_EDGE('',*,*,#424451,.T.); +#424466 = FACE_BOUND('',#424467,.F.); +#424467 = EDGE_LOOP('',(#424468)); +#424468 = ORIENTED_EDGE('',*,*,#424469,.T.); +#424469 = EDGE_CURVE('',#424470,#424470,#424472,.T.); +#424470 = VERTEX_POINT('',#424471); +#424471 = CARTESIAN_POINT('',(149.55,-133.075,-3.5E-02)); +#424472 = CIRCLE('',#424473,0.125); +#424473 = AXIS2_PLACEMENT_3D('',#424474,#424475,#424476); +#424474 = CARTESIAN_POINT('',(149.55,-132.95,-3.5E-02)); +#424475 = DIRECTION('',(-0.,0.,-1.)); +#424476 = DIRECTION('',(-0.,-1.,0.)); +#424477 = PLANE('',#424478); +#424478 = AXIS2_PLACEMENT_3D('',#424479,#424480,#424481); +#424479 = CARTESIAN_POINT('',(149.55,-133.1,-3.5E-02)); +#424480 = DIRECTION('',(0.,0.,1.)); +#424481 = DIRECTION('',(1.,0.,-0.)); +#424482 = ADVANCED_FACE('',(#424483,#424486),#424497,.T.); +#424483 = FACE_BOUND('',#424484,.T.); +#424484 = EDGE_LOOP('',(#424485)); +#424485 = ORIENTED_EDGE('',*,*,#424443,.T.); +#424486 = FACE_BOUND('',#424487,.T.); +#424487 = EDGE_LOOP('',(#424488)); +#424488 = ORIENTED_EDGE('',*,*,#424489,.T.); +#424489 = EDGE_CURVE('',#424490,#424490,#424492,.T.); +#424490 = VERTEX_POINT('',#424491); +#424491 = CARTESIAN_POINT('',(149.55,-133.075,1.545)); +#424492 = CIRCLE('',#424493,0.125); +#424493 = AXIS2_PLACEMENT_3D('',#424494,#424495,#424496); +#424494 = CARTESIAN_POINT('',(149.55,-132.95,1.545)); +#424495 = DIRECTION('',(-0.,0.,-1.)); +#424496 = DIRECTION('',(-0.,-1.,0.)); +#424497 = PLANE('',#424498); +#424498 = AXIS2_PLACEMENT_3D('',#424499,#424500,#424501); +#424499 = CARTESIAN_POINT('',(149.55,-133.1,1.545)); +#424500 = DIRECTION('',(0.,0.,1.)); +#424501 = DIRECTION('',(1.,0.,-0.)); +#424502 = ADVANCED_FACE('',(#424503),#424514,.F.); +#424503 = FACE_BOUND('',#424504,.T.); +#424504 = EDGE_LOOP('',(#424505,#424506,#424512,#424513)); +#424505 = ORIENTED_EDGE('',*,*,#424469,.T.); +#424506 = ORIENTED_EDGE('',*,*,#424507,.T.); +#424507 = EDGE_CURVE('',#424470,#424490,#424508,.T.); +#424508 = LINE('',#424509,#424510); +#424509 = CARTESIAN_POINT('',(149.55,-133.075,-3.6E-02)); +#424510 = VECTOR('',#424511,1.); +#424511 = DIRECTION('',(0.,0.,1.)); +#424512 = ORIENTED_EDGE('',*,*,#424489,.F.); +#424513 = ORIENTED_EDGE('',*,*,#424507,.F.); +#424514 = CYLINDRICAL_SURFACE('',#424515,0.125); +#424515 = AXIS2_PLACEMENT_3D('',#424516,#424517,#424518); +#424516 = CARTESIAN_POINT('',(149.55,-132.95,-3.6E-02)); +#424517 = DIRECTION('',(-0.,-0.,-1.)); +#424518 = DIRECTION('',(-0.,-1.,0.)); +#424519 = MANIFOLD_SOLID_BREP('',#424520); +#424520 = CLOSED_SHELL('',(#424521,#424554,#424574,#424594)); +#424521 = ADVANCED_FACE('',(#424522),#424549,.T.); +#424522 = FACE_BOUND('',#424523,.F.); +#424523 = EDGE_LOOP('',(#424524,#424534,#424541,#424542)); +#424524 = ORIENTED_EDGE('',*,*,#424525,.T.); +#424525 = EDGE_CURVE('',#424526,#424528,#424530,.T.); +#424526 = VERTEX_POINT('',#424527); +#424527 = CARTESIAN_POINT('',(148.,-91.65,-3.5E-02)); +#424528 = VERTEX_POINT('',#424529); +#424529 = CARTESIAN_POINT('',(148.,-91.65,1.545)); +#424530 = LINE('',#424531,#424532); +#424531 = CARTESIAN_POINT('',(148.,-91.65,-3.5E-02)); +#424532 = VECTOR('',#424533,1.); +#424533 = DIRECTION('',(0.,0.,1.)); +#424534 = ORIENTED_EDGE('',*,*,#424535,.T.); +#424535 = EDGE_CURVE('',#424528,#424528,#424536,.T.); +#424536 = CIRCLE('',#424537,0.15); +#424537 = AXIS2_PLACEMENT_3D('',#424538,#424539,#424540); +#424538 = CARTESIAN_POINT('',(148.,-91.5,1.545)); +#424539 = DIRECTION('',(0.,0.,1.)); +#424540 = DIRECTION('',(-0.,-1.,0.)); +#424541 = ORIENTED_EDGE('',*,*,#424525,.F.); +#424542 = ORIENTED_EDGE('',*,*,#424543,.F.); +#424543 = EDGE_CURVE('',#424526,#424526,#424544,.T.); +#424544 = CIRCLE('',#424545,0.15); +#424545 = AXIS2_PLACEMENT_3D('',#424546,#424547,#424548); +#424546 = CARTESIAN_POINT('',(148.,-91.5,-3.5E-02)); +#424547 = DIRECTION('',(0.,0.,1.)); +#424548 = DIRECTION('',(-0.,-1.,0.)); +#424549 = CYLINDRICAL_SURFACE('',#424550,0.15); +#424550 = AXIS2_PLACEMENT_3D('',#424551,#424552,#424553); +#424551 = CARTESIAN_POINT('',(148.,-91.5,-3.5E-02)); +#424552 = DIRECTION('',(-0.,-0.,-1.)); +#424553 = DIRECTION('',(-0.,-1.,0.)); +#424554 = ADVANCED_FACE('',(#424555,#424558),#424569,.F.); +#424555 = FACE_BOUND('',#424556,.F.); +#424556 = EDGE_LOOP('',(#424557)); +#424557 = ORIENTED_EDGE('',*,*,#424543,.T.); +#424558 = FACE_BOUND('',#424559,.F.); +#424559 = EDGE_LOOP('',(#424560)); +#424560 = ORIENTED_EDGE('',*,*,#424561,.T.); +#424561 = EDGE_CURVE('',#424562,#424562,#424564,.T.); +#424562 = VERTEX_POINT('',#424563); +#424563 = CARTESIAN_POINT('',(148.,-91.625,-3.5E-02)); +#424564 = CIRCLE('',#424565,0.125); +#424565 = AXIS2_PLACEMENT_3D('',#424566,#424567,#424568); +#424566 = CARTESIAN_POINT('',(148.,-91.5,-3.5E-02)); +#424567 = DIRECTION('',(-0.,0.,-1.)); +#424568 = DIRECTION('',(-0.,-1.,0.)); +#424569 = PLANE('',#424570); +#424570 = AXIS2_PLACEMENT_3D('',#424571,#424572,#424573); +#424571 = CARTESIAN_POINT('',(148.,-91.65,-3.5E-02)); +#424572 = DIRECTION('',(0.,0.,1.)); +#424573 = DIRECTION('',(1.,0.,-0.)); +#424574 = ADVANCED_FACE('',(#424575,#424578),#424589,.T.); +#424575 = FACE_BOUND('',#424576,.T.); +#424576 = EDGE_LOOP('',(#424577)); +#424577 = ORIENTED_EDGE('',*,*,#424535,.T.); +#424578 = FACE_BOUND('',#424579,.T.); +#424579 = EDGE_LOOP('',(#424580)); +#424580 = ORIENTED_EDGE('',*,*,#424581,.T.); +#424581 = EDGE_CURVE('',#424582,#424582,#424584,.T.); +#424582 = VERTEX_POINT('',#424583); +#424583 = CARTESIAN_POINT('',(148.,-91.625,1.545)); +#424584 = CIRCLE('',#424585,0.125); +#424585 = AXIS2_PLACEMENT_3D('',#424586,#424587,#424588); +#424586 = CARTESIAN_POINT('',(148.,-91.5,1.545)); +#424587 = DIRECTION('',(-0.,0.,-1.)); +#424588 = DIRECTION('',(-0.,-1.,0.)); +#424589 = PLANE('',#424590); +#424590 = AXIS2_PLACEMENT_3D('',#424591,#424592,#424593); +#424591 = CARTESIAN_POINT('',(148.,-91.65,1.545)); +#424592 = DIRECTION('',(0.,0.,1.)); +#424593 = DIRECTION('',(1.,0.,-0.)); +#424594 = ADVANCED_FACE('',(#424595),#424606,.F.); +#424595 = FACE_BOUND('',#424596,.T.); +#424596 = EDGE_LOOP('',(#424597,#424598,#424604,#424605)); +#424597 = ORIENTED_EDGE('',*,*,#424561,.T.); +#424598 = ORIENTED_EDGE('',*,*,#424599,.T.); +#424599 = EDGE_CURVE('',#424562,#424582,#424600,.T.); +#424600 = LINE('',#424601,#424602); +#424601 = CARTESIAN_POINT('',(148.,-91.625,-3.6E-02)); +#424602 = VECTOR('',#424603,1.); +#424603 = DIRECTION('',(0.,0.,1.)); +#424604 = ORIENTED_EDGE('',*,*,#424581,.F.); +#424605 = ORIENTED_EDGE('',*,*,#424599,.F.); +#424606 = CYLINDRICAL_SURFACE('',#424607,0.125); +#424607 = AXIS2_PLACEMENT_3D('',#424608,#424609,#424610); +#424608 = CARTESIAN_POINT('',(148.,-91.5,-3.6E-02)); +#424609 = DIRECTION('',(-0.,-0.,-1.)); +#424610 = DIRECTION('',(-0.,-1.,0.)); +#424611 = MANIFOLD_SOLID_BREP('',#424612); +#424612 = CLOSED_SHELL('',(#424613,#424646,#424666,#424686)); +#424613 = ADVANCED_FACE('',(#424614),#424641,.T.); +#424614 = FACE_BOUND('',#424615,.F.); +#424615 = EDGE_LOOP('',(#424616,#424626,#424633,#424634)); +#424616 = ORIENTED_EDGE('',*,*,#424617,.T.); +#424617 = EDGE_CURVE('',#424618,#424620,#424622,.T.); +#424618 = VERTEX_POINT('',#424619); +#424619 = CARTESIAN_POINT('',(142.8,-79.55,-3.5E-02)); +#424620 = VERTEX_POINT('',#424621); +#424621 = CARTESIAN_POINT('',(142.8,-79.55,1.545)); +#424622 = LINE('',#424623,#424624); +#424623 = CARTESIAN_POINT('',(142.8,-79.55,-3.5E-02)); +#424624 = VECTOR('',#424625,1.); +#424625 = DIRECTION('',(0.,0.,1.)); +#424626 = ORIENTED_EDGE('',*,*,#424627,.T.); +#424627 = EDGE_CURVE('',#424620,#424620,#424628,.T.); +#424628 = CIRCLE('',#424629,0.15); +#424629 = AXIS2_PLACEMENT_3D('',#424630,#424631,#424632); +#424630 = CARTESIAN_POINT('',(142.8,-79.4,1.545)); +#424631 = DIRECTION('',(0.,0.,1.)); +#424632 = DIRECTION('',(-0.,-1.,0.)); +#424633 = ORIENTED_EDGE('',*,*,#424617,.F.); +#424634 = ORIENTED_EDGE('',*,*,#424635,.F.); +#424635 = EDGE_CURVE('',#424618,#424618,#424636,.T.); +#424636 = CIRCLE('',#424637,0.15); +#424637 = AXIS2_PLACEMENT_3D('',#424638,#424639,#424640); +#424638 = CARTESIAN_POINT('',(142.8,-79.4,-3.5E-02)); +#424639 = DIRECTION('',(0.,0.,1.)); +#424640 = DIRECTION('',(-0.,-1.,0.)); +#424641 = CYLINDRICAL_SURFACE('',#424642,0.15); +#424642 = AXIS2_PLACEMENT_3D('',#424643,#424644,#424645); +#424643 = CARTESIAN_POINT('',(142.8,-79.4,-3.5E-02)); +#424644 = DIRECTION('',(-0.,-0.,-1.)); +#424645 = DIRECTION('',(-0.,-1.,0.)); +#424646 = ADVANCED_FACE('',(#424647,#424650),#424661,.F.); +#424647 = FACE_BOUND('',#424648,.F.); +#424648 = EDGE_LOOP('',(#424649)); +#424649 = ORIENTED_EDGE('',*,*,#424635,.T.); +#424650 = FACE_BOUND('',#424651,.F.); +#424651 = EDGE_LOOP('',(#424652)); +#424652 = ORIENTED_EDGE('',*,*,#424653,.T.); +#424653 = EDGE_CURVE('',#424654,#424654,#424656,.T.); +#424654 = VERTEX_POINT('',#424655); +#424655 = CARTESIAN_POINT('',(142.8,-79.525,-3.5E-02)); +#424656 = CIRCLE('',#424657,0.125); +#424657 = AXIS2_PLACEMENT_3D('',#424658,#424659,#424660); +#424658 = CARTESIAN_POINT('',(142.8,-79.4,-3.5E-02)); +#424659 = DIRECTION('',(-0.,0.,-1.)); +#424660 = DIRECTION('',(-0.,-1.,0.)); +#424661 = PLANE('',#424662); +#424662 = AXIS2_PLACEMENT_3D('',#424663,#424664,#424665); +#424663 = CARTESIAN_POINT('',(142.8,-79.55,-3.5E-02)); +#424664 = DIRECTION('',(0.,0.,1.)); +#424665 = DIRECTION('',(1.,0.,-0.)); +#424666 = ADVANCED_FACE('',(#424667,#424670),#424681,.T.); +#424667 = FACE_BOUND('',#424668,.T.); +#424668 = EDGE_LOOP('',(#424669)); +#424669 = ORIENTED_EDGE('',*,*,#424627,.T.); +#424670 = FACE_BOUND('',#424671,.T.); +#424671 = EDGE_LOOP('',(#424672)); +#424672 = ORIENTED_EDGE('',*,*,#424673,.T.); +#424673 = EDGE_CURVE('',#424674,#424674,#424676,.T.); +#424674 = VERTEX_POINT('',#424675); +#424675 = CARTESIAN_POINT('',(142.8,-79.525,1.545)); +#424676 = CIRCLE('',#424677,0.125); +#424677 = AXIS2_PLACEMENT_3D('',#424678,#424679,#424680); +#424678 = CARTESIAN_POINT('',(142.8,-79.4,1.545)); +#424679 = DIRECTION('',(-0.,0.,-1.)); +#424680 = DIRECTION('',(-0.,-1.,0.)); +#424681 = PLANE('',#424682); +#424682 = AXIS2_PLACEMENT_3D('',#424683,#424684,#424685); +#424683 = CARTESIAN_POINT('',(142.8,-79.55,1.545)); +#424684 = DIRECTION('',(0.,0.,1.)); +#424685 = DIRECTION('',(1.,0.,-0.)); +#424686 = ADVANCED_FACE('',(#424687),#424698,.F.); +#424687 = FACE_BOUND('',#424688,.T.); +#424688 = EDGE_LOOP('',(#424689,#424690,#424696,#424697)); +#424689 = ORIENTED_EDGE('',*,*,#424653,.T.); +#424690 = ORIENTED_EDGE('',*,*,#424691,.T.); +#424691 = EDGE_CURVE('',#424654,#424674,#424692,.T.); +#424692 = LINE('',#424693,#424694); +#424693 = CARTESIAN_POINT('',(142.8,-79.525,-3.6E-02)); +#424694 = VECTOR('',#424695,1.); +#424695 = DIRECTION('',(0.,0.,1.)); +#424696 = ORIENTED_EDGE('',*,*,#424673,.F.); +#424697 = ORIENTED_EDGE('',*,*,#424691,.F.); +#424698 = CYLINDRICAL_SURFACE('',#424699,0.125); +#424699 = AXIS2_PLACEMENT_3D('',#424700,#424701,#424702); +#424700 = CARTESIAN_POINT('',(142.8,-79.4,-3.6E-02)); +#424701 = DIRECTION('',(-0.,-0.,-1.)); +#424702 = DIRECTION('',(-0.,-1.,0.)); +#424703 = MANIFOLD_SOLID_BREP('',#424704); +#424704 = CLOSED_SHELL('',(#424705,#424738,#424758,#424778)); +#424705 = ADVANCED_FACE('',(#424706),#424733,.T.); +#424706 = FACE_BOUND('',#424707,.F.); +#424707 = EDGE_LOOP('',(#424708,#424718,#424725,#424726)); +#424708 = ORIENTED_EDGE('',*,*,#424709,.T.); +#424709 = EDGE_CURVE('',#424710,#424712,#424714,.T.); +#424710 = VERTEX_POINT('',#424711); +#424711 = CARTESIAN_POINT('',(138.6,-146.65,-3.5E-02)); +#424712 = VERTEX_POINT('',#424713); +#424713 = CARTESIAN_POINT('',(138.6,-146.65,1.545)); +#424714 = LINE('',#424715,#424716); +#424715 = CARTESIAN_POINT('',(138.6,-146.65,-3.5E-02)); +#424716 = VECTOR('',#424717,1.); +#424717 = DIRECTION('',(0.,0.,1.)); +#424718 = ORIENTED_EDGE('',*,*,#424719,.T.); +#424719 = EDGE_CURVE('',#424712,#424712,#424720,.T.); +#424720 = CIRCLE('',#424721,0.15); +#424721 = AXIS2_PLACEMENT_3D('',#424722,#424723,#424724); +#424722 = CARTESIAN_POINT('',(138.6,-146.5,1.545)); +#424723 = DIRECTION('',(0.,0.,1.)); +#424724 = DIRECTION('',(-0.,-1.,0.)); +#424725 = ORIENTED_EDGE('',*,*,#424709,.F.); +#424726 = ORIENTED_EDGE('',*,*,#424727,.F.); +#424727 = EDGE_CURVE('',#424710,#424710,#424728,.T.); +#424728 = CIRCLE('',#424729,0.15); +#424729 = AXIS2_PLACEMENT_3D('',#424730,#424731,#424732); +#424730 = CARTESIAN_POINT('',(138.6,-146.5,-3.5E-02)); +#424731 = DIRECTION('',(0.,0.,1.)); +#424732 = DIRECTION('',(-0.,-1.,0.)); +#424733 = CYLINDRICAL_SURFACE('',#424734,0.15); +#424734 = AXIS2_PLACEMENT_3D('',#424735,#424736,#424737); +#424735 = CARTESIAN_POINT('',(138.6,-146.5,-3.5E-02)); +#424736 = DIRECTION('',(-0.,-0.,-1.)); +#424737 = DIRECTION('',(-0.,-1.,0.)); +#424738 = ADVANCED_FACE('',(#424739,#424742),#424753,.F.); +#424739 = FACE_BOUND('',#424740,.F.); +#424740 = EDGE_LOOP('',(#424741)); +#424741 = ORIENTED_EDGE('',*,*,#424727,.T.); +#424742 = FACE_BOUND('',#424743,.F.); +#424743 = EDGE_LOOP('',(#424744)); +#424744 = ORIENTED_EDGE('',*,*,#424745,.T.); +#424745 = EDGE_CURVE('',#424746,#424746,#424748,.T.); +#424746 = VERTEX_POINT('',#424747); +#424747 = CARTESIAN_POINT('',(138.6,-146.625,-3.5E-02)); +#424748 = CIRCLE('',#424749,0.125); +#424749 = AXIS2_PLACEMENT_3D('',#424750,#424751,#424752); +#424750 = CARTESIAN_POINT('',(138.6,-146.5,-3.5E-02)); +#424751 = DIRECTION('',(-0.,0.,-1.)); +#424752 = DIRECTION('',(-0.,-1.,0.)); +#424753 = PLANE('',#424754); +#424754 = AXIS2_PLACEMENT_3D('',#424755,#424756,#424757); +#424755 = CARTESIAN_POINT('',(138.6,-146.65,-3.5E-02)); +#424756 = DIRECTION('',(0.,0.,1.)); +#424757 = DIRECTION('',(1.,0.,-0.)); +#424758 = ADVANCED_FACE('',(#424759,#424762),#424773,.T.); +#424759 = FACE_BOUND('',#424760,.T.); +#424760 = EDGE_LOOP('',(#424761)); +#424761 = ORIENTED_EDGE('',*,*,#424719,.T.); +#424762 = FACE_BOUND('',#424763,.T.); +#424763 = EDGE_LOOP('',(#424764)); +#424764 = ORIENTED_EDGE('',*,*,#424765,.T.); +#424765 = EDGE_CURVE('',#424766,#424766,#424768,.T.); +#424766 = VERTEX_POINT('',#424767); +#424767 = CARTESIAN_POINT('',(138.6,-146.625,1.545)); +#424768 = CIRCLE('',#424769,0.125); +#424769 = AXIS2_PLACEMENT_3D('',#424770,#424771,#424772); +#424770 = CARTESIAN_POINT('',(138.6,-146.5,1.545)); +#424771 = DIRECTION('',(-0.,0.,-1.)); +#424772 = DIRECTION('',(-0.,-1.,0.)); +#424773 = PLANE('',#424774); +#424774 = AXIS2_PLACEMENT_3D('',#424775,#424776,#424777); +#424775 = CARTESIAN_POINT('',(138.6,-146.65,1.545)); +#424776 = DIRECTION('',(0.,0.,1.)); +#424777 = DIRECTION('',(1.,0.,-0.)); +#424778 = ADVANCED_FACE('',(#424779),#424790,.F.); +#424779 = FACE_BOUND('',#424780,.T.); +#424780 = EDGE_LOOP('',(#424781,#424782,#424788,#424789)); +#424781 = ORIENTED_EDGE('',*,*,#424745,.T.); +#424782 = ORIENTED_EDGE('',*,*,#424783,.T.); +#424783 = EDGE_CURVE('',#424746,#424766,#424784,.T.); +#424784 = LINE('',#424785,#424786); +#424785 = CARTESIAN_POINT('',(138.6,-146.625,-3.6E-02)); +#424786 = VECTOR('',#424787,1.); +#424787 = DIRECTION('',(0.,0.,1.)); +#424788 = ORIENTED_EDGE('',*,*,#424765,.F.); +#424789 = ORIENTED_EDGE('',*,*,#424783,.F.); +#424790 = CYLINDRICAL_SURFACE('',#424791,0.125); +#424791 = AXIS2_PLACEMENT_3D('',#424792,#424793,#424794); +#424792 = CARTESIAN_POINT('',(138.6,-146.5,-3.6E-02)); +#424793 = DIRECTION('',(-0.,-0.,-1.)); +#424794 = DIRECTION('',(-0.,-1.,0.)); +#424795 = MANIFOLD_SOLID_BREP('',#424796); +#424796 = CLOSED_SHELL('',(#424797,#424830,#424850,#424870)); +#424797 = ADVANCED_FACE('',(#424798),#424825,.T.); +#424798 = FACE_BOUND('',#424799,.F.); +#424799 = EDGE_LOOP('',(#424800,#424810,#424817,#424818)); +#424800 = ORIENTED_EDGE('',*,*,#424801,.T.); +#424801 = EDGE_CURVE('',#424802,#424804,#424806,.T.); +#424802 = VERTEX_POINT('',#424803); +#424803 = CARTESIAN_POINT('',(130.8,-66.05,-3.5E-02)); +#424804 = VERTEX_POINT('',#424805); +#424805 = CARTESIAN_POINT('',(130.8,-66.05,1.545)); +#424806 = LINE('',#424807,#424808); +#424807 = CARTESIAN_POINT('',(130.8,-66.05,-3.5E-02)); +#424808 = VECTOR('',#424809,1.); +#424809 = DIRECTION('',(0.,0.,1.)); +#424810 = ORIENTED_EDGE('',*,*,#424811,.T.); +#424811 = EDGE_CURVE('',#424804,#424804,#424812,.T.); +#424812 = CIRCLE('',#424813,0.15); +#424813 = AXIS2_PLACEMENT_3D('',#424814,#424815,#424816); +#424814 = CARTESIAN_POINT('',(130.8,-65.9,1.545)); +#424815 = DIRECTION('',(0.,0.,1.)); +#424816 = DIRECTION('',(-0.,-1.,0.)); +#424817 = ORIENTED_EDGE('',*,*,#424801,.F.); +#424818 = ORIENTED_EDGE('',*,*,#424819,.F.); +#424819 = EDGE_CURVE('',#424802,#424802,#424820,.T.); +#424820 = CIRCLE('',#424821,0.15); +#424821 = AXIS2_PLACEMENT_3D('',#424822,#424823,#424824); +#424822 = CARTESIAN_POINT('',(130.8,-65.9,-3.5E-02)); +#424823 = DIRECTION('',(0.,0.,1.)); +#424824 = DIRECTION('',(-0.,-1.,0.)); +#424825 = CYLINDRICAL_SURFACE('',#424826,0.15); +#424826 = AXIS2_PLACEMENT_3D('',#424827,#424828,#424829); +#424827 = CARTESIAN_POINT('',(130.8,-65.9,-3.5E-02)); +#424828 = DIRECTION('',(-0.,-0.,-1.)); +#424829 = DIRECTION('',(-0.,-1.,0.)); +#424830 = ADVANCED_FACE('',(#424831,#424834),#424845,.F.); +#424831 = FACE_BOUND('',#424832,.F.); +#424832 = EDGE_LOOP('',(#424833)); +#424833 = ORIENTED_EDGE('',*,*,#424819,.T.); +#424834 = FACE_BOUND('',#424835,.F.); +#424835 = EDGE_LOOP('',(#424836)); +#424836 = ORIENTED_EDGE('',*,*,#424837,.T.); +#424837 = EDGE_CURVE('',#424838,#424838,#424840,.T.); +#424838 = VERTEX_POINT('',#424839); +#424839 = CARTESIAN_POINT('',(130.8,-66.025,-3.5E-02)); +#424840 = CIRCLE('',#424841,0.125); +#424841 = AXIS2_PLACEMENT_3D('',#424842,#424843,#424844); +#424842 = CARTESIAN_POINT('',(130.8,-65.9,-3.5E-02)); +#424843 = DIRECTION('',(-0.,0.,-1.)); +#424844 = DIRECTION('',(-0.,-1.,0.)); +#424845 = PLANE('',#424846); +#424846 = AXIS2_PLACEMENT_3D('',#424847,#424848,#424849); +#424847 = CARTESIAN_POINT('',(130.8,-66.05,-3.5E-02)); +#424848 = DIRECTION('',(0.,0.,1.)); +#424849 = DIRECTION('',(1.,0.,-0.)); +#424850 = ADVANCED_FACE('',(#424851,#424854),#424865,.T.); +#424851 = FACE_BOUND('',#424852,.T.); +#424852 = EDGE_LOOP('',(#424853)); +#424853 = ORIENTED_EDGE('',*,*,#424811,.T.); +#424854 = FACE_BOUND('',#424855,.T.); +#424855 = EDGE_LOOP('',(#424856)); +#424856 = ORIENTED_EDGE('',*,*,#424857,.T.); +#424857 = EDGE_CURVE('',#424858,#424858,#424860,.T.); +#424858 = VERTEX_POINT('',#424859); +#424859 = CARTESIAN_POINT('',(130.8,-66.025,1.545)); +#424860 = CIRCLE('',#424861,0.125); +#424861 = AXIS2_PLACEMENT_3D('',#424862,#424863,#424864); +#424862 = CARTESIAN_POINT('',(130.8,-65.9,1.545)); +#424863 = DIRECTION('',(-0.,0.,-1.)); +#424864 = DIRECTION('',(-0.,-1.,0.)); +#424865 = PLANE('',#424866); +#424866 = AXIS2_PLACEMENT_3D('',#424867,#424868,#424869); +#424867 = CARTESIAN_POINT('',(130.8,-66.05,1.545)); +#424868 = DIRECTION('',(0.,0.,1.)); +#424869 = DIRECTION('',(1.,0.,-0.)); +#424870 = ADVANCED_FACE('',(#424871),#424882,.F.); +#424871 = FACE_BOUND('',#424872,.T.); +#424872 = EDGE_LOOP('',(#424873,#424874,#424880,#424881)); +#424873 = ORIENTED_EDGE('',*,*,#424837,.T.); +#424874 = ORIENTED_EDGE('',*,*,#424875,.T.); +#424875 = EDGE_CURVE('',#424838,#424858,#424876,.T.); +#424876 = LINE('',#424877,#424878); +#424877 = CARTESIAN_POINT('',(130.8,-66.025,-3.6E-02)); +#424878 = VECTOR('',#424879,1.); +#424879 = DIRECTION('',(0.,0.,1.)); +#424880 = ORIENTED_EDGE('',*,*,#424857,.F.); +#424881 = ORIENTED_EDGE('',*,*,#424875,.F.); +#424882 = CYLINDRICAL_SURFACE('',#424883,0.125); +#424883 = AXIS2_PLACEMENT_3D('',#424884,#424885,#424886); +#424884 = CARTESIAN_POINT('',(130.8,-65.9,-3.6E-02)); +#424885 = DIRECTION('',(-0.,-0.,-1.)); +#424886 = DIRECTION('',(-0.,-1.,0.)); +#424887 = MANIFOLD_SOLID_BREP('',#424888); +#424888 = CLOSED_SHELL('',(#424889,#424922,#424942,#424962)); +#424889 = ADVANCED_FACE('',(#424890),#424917,.T.); +#424890 = FACE_BOUND('',#424891,.F.); +#424891 = EDGE_LOOP('',(#424892,#424902,#424909,#424910)); +#424892 = ORIENTED_EDGE('',*,*,#424893,.T.); +#424893 = EDGE_CURVE('',#424894,#424896,#424898,.T.); +#424894 = VERTEX_POINT('',#424895); +#424895 = CARTESIAN_POINT('',(137.4,-79.35,-3.5E-02)); +#424896 = VERTEX_POINT('',#424897); +#424897 = CARTESIAN_POINT('',(137.4,-79.35,1.545)); +#424898 = LINE('',#424899,#424900); +#424899 = CARTESIAN_POINT('',(137.4,-79.35,-3.5E-02)); +#424900 = VECTOR('',#424901,1.); +#424901 = DIRECTION('',(0.,0.,1.)); +#424902 = ORIENTED_EDGE('',*,*,#424903,.T.); +#424903 = EDGE_CURVE('',#424896,#424896,#424904,.T.); +#424904 = CIRCLE('',#424905,0.15); +#424905 = AXIS2_PLACEMENT_3D('',#424906,#424907,#424908); +#424906 = CARTESIAN_POINT('',(137.4,-79.2,1.545)); +#424907 = DIRECTION('',(0.,0.,1.)); +#424908 = DIRECTION('',(-0.,-1.,0.)); +#424909 = ORIENTED_EDGE('',*,*,#424893,.F.); +#424910 = ORIENTED_EDGE('',*,*,#424911,.F.); +#424911 = EDGE_CURVE('',#424894,#424894,#424912,.T.); +#424912 = CIRCLE('',#424913,0.15); +#424913 = AXIS2_PLACEMENT_3D('',#424914,#424915,#424916); +#424914 = CARTESIAN_POINT('',(137.4,-79.2,-3.5E-02)); +#424915 = DIRECTION('',(0.,0.,1.)); +#424916 = DIRECTION('',(-0.,-1.,0.)); +#424917 = CYLINDRICAL_SURFACE('',#424918,0.15); +#424918 = AXIS2_PLACEMENT_3D('',#424919,#424920,#424921); +#424919 = CARTESIAN_POINT('',(137.4,-79.2,-3.5E-02)); +#424920 = DIRECTION('',(-0.,-0.,-1.)); +#424921 = DIRECTION('',(-0.,-1.,0.)); +#424922 = ADVANCED_FACE('',(#424923,#424926),#424937,.F.); +#424923 = FACE_BOUND('',#424924,.F.); +#424924 = EDGE_LOOP('',(#424925)); +#424925 = ORIENTED_EDGE('',*,*,#424911,.T.); +#424926 = FACE_BOUND('',#424927,.F.); +#424927 = EDGE_LOOP('',(#424928)); +#424928 = ORIENTED_EDGE('',*,*,#424929,.T.); +#424929 = EDGE_CURVE('',#424930,#424930,#424932,.T.); +#424930 = VERTEX_POINT('',#424931); +#424931 = CARTESIAN_POINT('',(137.4,-79.325,-3.5E-02)); +#424932 = CIRCLE('',#424933,0.125); +#424933 = AXIS2_PLACEMENT_3D('',#424934,#424935,#424936); +#424934 = CARTESIAN_POINT('',(137.4,-79.2,-3.5E-02)); +#424935 = DIRECTION('',(-0.,0.,-1.)); +#424936 = DIRECTION('',(-0.,-1.,0.)); +#424937 = PLANE('',#424938); +#424938 = AXIS2_PLACEMENT_3D('',#424939,#424940,#424941); +#424939 = CARTESIAN_POINT('',(137.4,-79.35,-3.5E-02)); +#424940 = DIRECTION('',(0.,0.,1.)); +#424941 = DIRECTION('',(1.,0.,-0.)); +#424942 = ADVANCED_FACE('',(#424943,#424946),#424957,.T.); +#424943 = FACE_BOUND('',#424944,.T.); +#424944 = EDGE_LOOP('',(#424945)); +#424945 = ORIENTED_EDGE('',*,*,#424903,.T.); +#424946 = FACE_BOUND('',#424947,.T.); +#424947 = EDGE_LOOP('',(#424948)); +#424948 = ORIENTED_EDGE('',*,*,#424949,.T.); +#424949 = EDGE_CURVE('',#424950,#424950,#424952,.T.); +#424950 = VERTEX_POINT('',#424951); +#424951 = CARTESIAN_POINT('',(137.4,-79.325,1.545)); +#424952 = CIRCLE('',#424953,0.125); +#424953 = AXIS2_PLACEMENT_3D('',#424954,#424955,#424956); +#424954 = CARTESIAN_POINT('',(137.4,-79.2,1.545)); +#424955 = DIRECTION('',(-0.,0.,-1.)); +#424956 = DIRECTION('',(-0.,-1.,0.)); +#424957 = PLANE('',#424958); +#424958 = AXIS2_PLACEMENT_3D('',#424959,#424960,#424961); +#424959 = CARTESIAN_POINT('',(137.4,-79.35,1.545)); +#424960 = DIRECTION('',(0.,0.,1.)); +#424961 = DIRECTION('',(1.,0.,-0.)); +#424962 = ADVANCED_FACE('',(#424963),#424974,.F.); +#424963 = FACE_BOUND('',#424964,.T.); +#424964 = EDGE_LOOP('',(#424965,#424966,#424972,#424973)); +#424965 = ORIENTED_EDGE('',*,*,#424929,.T.); +#424966 = ORIENTED_EDGE('',*,*,#424967,.T.); +#424967 = EDGE_CURVE('',#424930,#424950,#424968,.T.); +#424968 = LINE('',#424969,#424970); +#424969 = CARTESIAN_POINT('',(137.4,-79.325,-3.6E-02)); +#424970 = VECTOR('',#424971,1.); +#424971 = DIRECTION('',(0.,0.,1.)); +#424972 = ORIENTED_EDGE('',*,*,#424949,.F.); +#424973 = ORIENTED_EDGE('',*,*,#424967,.F.); +#424974 = CYLINDRICAL_SURFACE('',#424975,0.125); +#424975 = AXIS2_PLACEMENT_3D('',#424976,#424977,#424978); +#424976 = CARTESIAN_POINT('',(137.4,-79.2,-3.6E-02)); +#424977 = DIRECTION('',(-0.,-0.,-1.)); +#424978 = DIRECTION('',(-0.,-1.,0.)); +#424979 = MANIFOLD_SOLID_BREP('',#424980); +#424980 = CLOSED_SHELL('',(#424981,#425014,#425034,#425054)); +#424981 = ADVANCED_FACE('',(#424982),#425009,.T.); +#424982 = FACE_BOUND('',#424983,.F.); +#424983 = EDGE_LOOP('',(#424984,#424994,#425001,#425002)); +#424984 = ORIENTED_EDGE('',*,*,#424985,.T.); +#424985 = EDGE_CURVE('',#424986,#424988,#424990,.T.); +#424986 = VERTEX_POINT('',#424987); +#424987 = CARTESIAN_POINT('',(147.5,-83.15,-3.5E-02)); +#424988 = VERTEX_POINT('',#424989); +#424989 = CARTESIAN_POINT('',(147.5,-83.15,1.545)); +#424990 = LINE('',#424991,#424992); +#424991 = CARTESIAN_POINT('',(147.5,-83.15,-3.5E-02)); +#424992 = VECTOR('',#424993,1.); +#424993 = DIRECTION('',(0.,0.,1.)); +#424994 = ORIENTED_EDGE('',*,*,#424995,.T.); +#424995 = EDGE_CURVE('',#424988,#424988,#424996,.T.); +#424996 = CIRCLE('',#424997,0.15); +#424997 = AXIS2_PLACEMENT_3D('',#424998,#424999,#425000); +#424998 = CARTESIAN_POINT('',(147.5,-83.,1.545)); +#424999 = DIRECTION('',(0.,0.,1.)); +#425000 = DIRECTION('',(-0.,-1.,0.)); +#425001 = ORIENTED_EDGE('',*,*,#424985,.F.); +#425002 = ORIENTED_EDGE('',*,*,#425003,.F.); +#425003 = EDGE_CURVE('',#424986,#424986,#425004,.T.); +#425004 = CIRCLE('',#425005,0.15); +#425005 = AXIS2_PLACEMENT_3D('',#425006,#425007,#425008); +#425006 = CARTESIAN_POINT('',(147.5,-83.,-3.5E-02)); +#425007 = DIRECTION('',(0.,0.,1.)); +#425008 = DIRECTION('',(-0.,-1.,0.)); +#425009 = CYLINDRICAL_SURFACE('',#425010,0.15); +#425010 = AXIS2_PLACEMENT_3D('',#425011,#425012,#425013); +#425011 = CARTESIAN_POINT('',(147.5,-83.,-3.5E-02)); +#425012 = DIRECTION('',(-0.,-0.,-1.)); +#425013 = DIRECTION('',(-0.,-1.,0.)); +#425014 = ADVANCED_FACE('',(#425015,#425018),#425029,.F.); +#425015 = FACE_BOUND('',#425016,.F.); +#425016 = EDGE_LOOP('',(#425017)); +#425017 = ORIENTED_EDGE('',*,*,#425003,.T.); +#425018 = FACE_BOUND('',#425019,.F.); +#425019 = EDGE_LOOP('',(#425020)); +#425020 = ORIENTED_EDGE('',*,*,#425021,.T.); +#425021 = EDGE_CURVE('',#425022,#425022,#425024,.T.); +#425022 = VERTEX_POINT('',#425023); +#425023 = CARTESIAN_POINT('',(147.5,-83.125,-3.5E-02)); +#425024 = CIRCLE('',#425025,0.125); +#425025 = AXIS2_PLACEMENT_3D('',#425026,#425027,#425028); +#425026 = CARTESIAN_POINT('',(147.5,-83.,-3.5E-02)); +#425027 = DIRECTION('',(-0.,0.,-1.)); +#425028 = DIRECTION('',(-0.,-1.,0.)); +#425029 = PLANE('',#425030); +#425030 = AXIS2_PLACEMENT_3D('',#425031,#425032,#425033); +#425031 = CARTESIAN_POINT('',(147.5,-83.15,-3.5E-02)); +#425032 = DIRECTION('',(0.,0.,1.)); +#425033 = DIRECTION('',(1.,0.,-0.)); +#425034 = ADVANCED_FACE('',(#425035,#425038),#425049,.T.); +#425035 = FACE_BOUND('',#425036,.T.); +#425036 = EDGE_LOOP('',(#425037)); +#425037 = ORIENTED_EDGE('',*,*,#424995,.T.); +#425038 = FACE_BOUND('',#425039,.T.); +#425039 = EDGE_LOOP('',(#425040)); +#425040 = ORIENTED_EDGE('',*,*,#425041,.T.); +#425041 = EDGE_CURVE('',#425042,#425042,#425044,.T.); +#425042 = VERTEX_POINT('',#425043); +#425043 = CARTESIAN_POINT('',(147.5,-83.125,1.545)); +#425044 = CIRCLE('',#425045,0.125); +#425045 = AXIS2_PLACEMENT_3D('',#425046,#425047,#425048); +#425046 = CARTESIAN_POINT('',(147.5,-83.,1.545)); +#425047 = DIRECTION('',(-0.,0.,-1.)); +#425048 = DIRECTION('',(-0.,-1.,0.)); +#425049 = PLANE('',#425050); +#425050 = AXIS2_PLACEMENT_3D('',#425051,#425052,#425053); +#425051 = CARTESIAN_POINT('',(147.5,-83.15,1.545)); +#425052 = DIRECTION('',(0.,0.,1.)); +#425053 = DIRECTION('',(1.,0.,-0.)); +#425054 = ADVANCED_FACE('',(#425055),#425066,.F.); +#425055 = FACE_BOUND('',#425056,.T.); +#425056 = EDGE_LOOP('',(#425057,#425058,#425064,#425065)); +#425057 = ORIENTED_EDGE('',*,*,#425021,.T.); +#425058 = ORIENTED_EDGE('',*,*,#425059,.T.); +#425059 = EDGE_CURVE('',#425022,#425042,#425060,.T.); +#425060 = LINE('',#425061,#425062); +#425061 = CARTESIAN_POINT('',(147.5,-83.125,-3.6E-02)); +#425062 = VECTOR('',#425063,1.); +#425063 = DIRECTION('',(0.,0.,1.)); +#425064 = ORIENTED_EDGE('',*,*,#425041,.F.); +#425065 = ORIENTED_EDGE('',*,*,#425059,.F.); +#425066 = CYLINDRICAL_SURFACE('',#425067,0.125); +#425067 = AXIS2_PLACEMENT_3D('',#425068,#425069,#425070); +#425068 = CARTESIAN_POINT('',(147.5,-83.,-3.6E-02)); +#425069 = DIRECTION('',(-0.,-0.,-1.)); +#425070 = DIRECTION('',(-0.,-1.,0.)); +#425071 = MANIFOLD_SOLID_BREP('',#425072); +#425072 = CLOSED_SHELL('',(#425073,#425106,#425126,#425146)); +#425073 = ADVANCED_FACE('',(#425074),#425101,.T.); +#425074 = FACE_BOUND('',#425075,.F.); +#425075 = EDGE_LOOP('',(#425076,#425086,#425093,#425094)); +#425076 = ORIENTED_EDGE('',*,*,#425077,.T.); +#425077 = EDGE_CURVE('',#425078,#425080,#425082,.T.); +#425078 = VERTEX_POINT('',#425079); +#425079 = CARTESIAN_POINT('',(140.,-75.6,-3.5E-02)); +#425080 = VERTEX_POINT('',#425081); +#425081 = CARTESIAN_POINT('',(140.,-75.6,1.545)); +#425082 = LINE('',#425083,#425084); +#425083 = CARTESIAN_POINT('',(140.,-75.6,-3.5E-02)); +#425084 = VECTOR('',#425085,1.); +#425085 = DIRECTION('',(0.,0.,1.)); +#425086 = ORIENTED_EDGE('',*,*,#425087,.T.); +#425087 = EDGE_CURVE('',#425080,#425080,#425088,.T.); +#425088 = CIRCLE('',#425089,0.15); +#425089 = AXIS2_PLACEMENT_3D('',#425090,#425091,#425092); +#425090 = CARTESIAN_POINT('',(140.,-75.45,1.545)); +#425091 = DIRECTION('',(0.,0.,1.)); +#425092 = DIRECTION('',(-0.,-1.,0.)); +#425093 = ORIENTED_EDGE('',*,*,#425077,.F.); +#425094 = ORIENTED_EDGE('',*,*,#425095,.F.); +#425095 = EDGE_CURVE('',#425078,#425078,#425096,.T.); +#425096 = CIRCLE('',#425097,0.15); +#425097 = AXIS2_PLACEMENT_3D('',#425098,#425099,#425100); +#425098 = CARTESIAN_POINT('',(140.,-75.45,-3.5E-02)); +#425099 = DIRECTION('',(0.,0.,1.)); +#425100 = DIRECTION('',(-0.,-1.,0.)); +#425101 = CYLINDRICAL_SURFACE('',#425102,0.15); +#425102 = AXIS2_PLACEMENT_3D('',#425103,#425104,#425105); +#425103 = CARTESIAN_POINT('',(140.,-75.45,-3.5E-02)); +#425104 = DIRECTION('',(-0.,-0.,-1.)); +#425105 = DIRECTION('',(-0.,-1.,0.)); +#425106 = ADVANCED_FACE('',(#425107,#425110),#425121,.F.); +#425107 = FACE_BOUND('',#425108,.F.); +#425108 = EDGE_LOOP('',(#425109)); +#425109 = ORIENTED_EDGE('',*,*,#425095,.T.); +#425110 = FACE_BOUND('',#425111,.F.); +#425111 = EDGE_LOOP('',(#425112)); +#425112 = ORIENTED_EDGE('',*,*,#425113,.T.); +#425113 = EDGE_CURVE('',#425114,#425114,#425116,.T.); +#425114 = VERTEX_POINT('',#425115); +#425115 = CARTESIAN_POINT('',(140.,-75.575,-3.5E-02)); +#425116 = CIRCLE('',#425117,0.125); +#425117 = AXIS2_PLACEMENT_3D('',#425118,#425119,#425120); +#425118 = CARTESIAN_POINT('',(140.,-75.45,-3.5E-02)); +#425119 = DIRECTION('',(-0.,0.,-1.)); +#425120 = DIRECTION('',(-0.,-1.,0.)); +#425121 = PLANE('',#425122); +#425122 = AXIS2_PLACEMENT_3D('',#425123,#425124,#425125); +#425123 = CARTESIAN_POINT('',(140.,-75.6,-3.5E-02)); +#425124 = DIRECTION('',(0.,0.,1.)); +#425125 = DIRECTION('',(1.,0.,-0.)); +#425126 = ADVANCED_FACE('',(#425127,#425130),#425141,.T.); +#425127 = FACE_BOUND('',#425128,.T.); +#425128 = EDGE_LOOP('',(#425129)); +#425129 = ORIENTED_EDGE('',*,*,#425087,.T.); +#425130 = FACE_BOUND('',#425131,.T.); +#425131 = EDGE_LOOP('',(#425132)); +#425132 = ORIENTED_EDGE('',*,*,#425133,.T.); +#425133 = EDGE_CURVE('',#425134,#425134,#425136,.T.); +#425134 = VERTEX_POINT('',#425135); +#425135 = CARTESIAN_POINT('',(140.,-75.575,1.545)); +#425136 = CIRCLE('',#425137,0.125); +#425137 = AXIS2_PLACEMENT_3D('',#425138,#425139,#425140); +#425138 = CARTESIAN_POINT('',(140.,-75.45,1.545)); +#425139 = DIRECTION('',(-0.,0.,-1.)); +#425140 = DIRECTION('',(-0.,-1.,0.)); +#425141 = PLANE('',#425142); +#425142 = AXIS2_PLACEMENT_3D('',#425143,#425144,#425145); +#425143 = CARTESIAN_POINT('',(140.,-75.6,1.545)); +#425144 = DIRECTION('',(0.,0.,1.)); +#425145 = DIRECTION('',(1.,0.,-0.)); +#425146 = ADVANCED_FACE('',(#425147),#425158,.F.); +#425147 = FACE_BOUND('',#425148,.T.); +#425148 = EDGE_LOOP('',(#425149,#425150,#425156,#425157)); +#425149 = ORIENTED_EDGE('',*,*,#425113,.T.); +#425150 = ORIENTED_EDGE('',*,*,#425151,.T.); +#425151 = EDGE_CURVE('',#425114,#425134,#425152,.T.); +#425152 = LINE('',#425153,#425154); +#425153 = CARTESIAN_POINT('',(140.,-75.575,-3.6E-02)); +#425154 = VECTOR('',#425155,1.); +#425155 = DIRECTION('',(0.,0.,1.)); +#425156 = ORIENTED_EDGE('',*,*,#425133,.F.); +#425157 = ORIENTED_EDGE('',*,*,#425151,.F.); +#425158 = CYLINDRICAL_SURFACE('',#425159,0.125); +#425159 = AXIS2_PLACEMENT_3D('',#425160,#425161,#425162); +#425160 = CARTESIAN_POINT('',(140.,-75.45,-3.6E-02)); +#425161 = DIRECTION('',(-0.,-0.,-1.)); +#425162 = DIRECTION('',(-0.,-1.,0.)); +#425163 = MANIFOLD_SOLID_BREP('',#425164); +#425164 = CLOSED_SHELL('',(#425165,#425198,#425218,#425238)); +#425165 = ADVANCED_FACE('',(#425166),#425193,.T.); +#425166 = FACE_BOUND('',#425167,.F.); +#425167 = EDGE_LOOP('',(#425168,#425178,#425185,#425186)); +#425168 = ORIENTED_EDGE('',*,*,#425169,.T.); +#425169 = EDGE_CURVE('',#425170,#425172,#425174,.T.); +#425170 = VERTEX_POINT('',#425171); +#425171 = CARTESIAN_POINT('',(133.4,-80.55,-3.5E-02)); +#425172 = VERTEX_POINT('',#425173); +#425173 = CARTESIAN_POINT('',(133.4,-80.55,1.545)); +#425174 = LINE('',#425175,#425176); +#425175 = CARTESIAN_POINT('',(133.4,-80.55,-3.5E-02)); +#425176 = VECTOR('',#425177,1.); +#425177 = DIRECTION('',(0.,0.,1.)); +#425178 = ORIENTED_EDGE('',*,*,#425179,.T.); +#425179 = EDGE_CURVE('',#425172,#425172,#425180,.T.); +#425180 = CIRCLE('',#425181,0.15); +#425181 = AXIS2_PLACEMENT_3D('',#425182,#425183,#425184); +#425182 = CARTESIAN_POINT('',(133.4,-80.4,1.545)); +#425183 = DIRECTION('',(0.,0.,1.)); +#425184 = DIRECTION('',(-0.,-1.,0.)); +#425185 = ORIENTED_EDGE('',*,*,#425169,.F.); +#425186 = ORIENTED_EDGE('',*,*,#425187,.F.); +#425187 = EDGE_CURVE('',#425170,#425170,#425188,.T.); +#425188 = CIRCLE('',#425189,0.15); +#425189 = AXIS2_PLACEMENT_3D('',#425190,#425191,#425192); +#425190 = CARTESIAN_POINT('',(133.4,-80.4,-3.5E-02)); +#425191 = DIRECTION('',(0.,0.,1.)); +#425192 = DIRECTION('',(-0.,-1.,0.)); +#425193 = CYLINDRICAL_SURFACE('',#425194,0.15); +#425194 = AXIS2_PLACEMENT_3D('',#425195,#425196,#425197); +#425195 = CARTESIAN_POINT('',(133.4,-80.4,-3.5E-02)); +#425196 = DIRECTION('',(-0.,-0.,-1.)); +#425197 = DIRECTION('',(-0.,-1.,0.)); +#425198 = ADVANCED_FACE('',(#425199,#425202),#425213,.F.); +#425199 = FACE_BOUND('',#425200,.F.); +#425200 = EDGE_LOOP('',(#425201)); +#425201 = ORIENTED_EDGE('',*,*,#425187,.T.); +#425202 = FACE_BOUND('',#425203,.F.); +#425203 = EDGE_LOOP('',(#425204)); +#425204 = ORIENTED_EDGE('',*,*,#425205,.T.); +#425205 = EDGE_CURVE('',#425206,#425206,#425208,.T.); +#425206 = VERTEX_POINT('',#425207); +#425207 = CARTESIAN_POINT('',(133.4,-80.525,-3.5E-02)); +#425208 = CIRCLE('',#425209,0.125); +#425209 = AXIS2_PLACEMENT_3D('',#425210,#425211,#425212); +#425210 = CARTESIAN_POINT('',(133.4,-80.4,-3.5E-02)); +#425211 = DIRECTION('',(-0.,0.,-1.)); +#425212 = DIRECTION('',(-0.,-1.,0.)); +#425213 = PLANE('',#425214); +#425214 = AXIS2_PLACEMENT_3D('',#425215,#425216,#425217); +#425215 = CARTESIAN_POINT('',(133.4,-80.55,-3.5E-02)); +#425216 = DIRECTION('',(0.,0.,1.)); +#425217 = DIRECTION('',(1.,0.,-0.)); +#425218 = ADVANCED_FACE('',(#425219,#425222),#425233,.T.); +#425219 = FACE_BOUND('',#425220,.T.); +#425220 = EDGE_LOOP('',(#425221)); +#425221 = ORIENTED_EDGE('',*,*,#425179,.T.); +#425222 = FACE_BOUND('',#425223,.T.); +#425223 = EDGE_LOOP('',(#425224)); +#425224 = ORIENTED_EDGE('',*,*,#425225,.T.); +#425225 = EDGE_CURVE('',#425226,#425226,#425228,.T.); +#425226 = VERTEX_POINT('',#425227); +#425227 = CARTESIAN_POINT('',(133.4,-80.525,1.545)); +#425228 = CIRCLE('',#425229,0.125); +#425229 = AXIS2_PLACEMENT_3D('',#425230,#425231,#425232); +#425230 = CARTESIAN_POINT('',(133.4,-80.4,1.545)); +#425231 = DIRECTION('',(-0.,0.,-1.)); +#425232 = DIRECTION('',(-0.,-1.,0.)); +#425233 = PLANE('',#425234); +#425234 = AXIS2_PLACEMENT_3D('',#425235,#425236,#425237); +#425235 = CARTESIAN_POINT('',(133.4,-80.55,1.545)); +#425236 = DIRECTION('',(0.,0.,1.)); +#425237 = DIRECTION('',(1.,0.,-0.)); +#425238 = ADVANCED_FACE('',(#425239),#425250,.F.); +#425239 = FACE_BOUND('',#425240,.T.); +#425240 = EDGE_LOOP('',(#425241,#425242,#425248,#425249)); +#425241 = ORIENTED_EDGE('',*,*,#425205,.T.); +#425242 = ORIENTED_EDGE('',*,*,#425243,.T.); +#425243 = EDGE_CURVE('',#425206,#425226,#425244,.T.); +#425244 = LINE('',#425245,#425246); +#425245 = CARTESIAN_POINT('',(133.4,-80.525,-3.6E-02)); +#425246 = VECTOR('',#425247,1.); +#425247 = DIRECTION('',(0.,0.,1.)); +#425248 = ORIENTED_EDGE('',*,*,#425225,.F.); +#425249 = ORIENTED_EDGE('',*,*,#425243,.F.); +#425250 = CYLINDRICAL_SURFACE('',#425251,0.125); +#425251 = AXIS2_PLACEMENT_3D('',#425252,#425253,#425254); +#425252 = CARTESIAN_POINT('',(133.4,-80.4,-3.6E-02)); +#425253 = DIRECTION('',(-0.,-0.,-1.)); +#425254 = DIRECTION('',(-0.,-1.,0.)); +#425255 = MANIFOLD_SOLID_BREP('',#425256); +#425256 = CLOSED_SHELL('',(#425257,#425290,#425310,#425330)); +#425257 = ADVANCED_FACE('',(#425258),#425285,.T.); +#425258 = FACE_BOUND('',#425259,.F.); +#425259 = EDGE_LOOP('',(#425260,#425270,#425277,#425278)); +#425260 = ORIENTED_EDGE('',*,*,#425261,.T.); +#425261 = EDGE_CURVE('',#425262,#425264,#425266,.T.); +#425262 = VERTEX_POINT('',#425263); +#425263 = CARTESIAN_POINT('',(123.2,-64.65,-3.5E-02)); +#425264 = VERTEX_POINT('',#425265); +#425265 = CARTESIAN_POINT('',(123.2,-64.65,1.545)); +#425266 = LINE('',#425267,#425268); +#425267 = CARTESIAN_POINT('',(123.2,-64.65,-3.5E-02)); +#425268 = VECTOR('',#425269,1.); +#425269 = DIRECTION('',(0.,0.,1.)); +#425270 = ORIENTED_EDGE('',*,*,#425271,.T.); +#425271 = EDGE_CURVE('',#425264,#425264,#425272,.T.); +#425272 = CIRCLE('',#425273,0.15); +#425273 = AXIS2_PLACEMENT_3D('',#425274,#425275,#425276); +#425274 = CARTESIAN_POINT('',(123.2,-64.5,1.545)); +#425275 = DIRECTION('',(0.,-0.,1.)); +#425276 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#425277 = ORIENTED_EDGE('',*,*,#425261,.F.); +#425278 = ORIENTED_EDGE('',*,*,#425279,.F.); +#425279 = EDGE_CURVE('',#425262,#425262,#425280,.T.); +#425280 = CIRCLE('',#425281,0.15); +#425281 = AXIS2_PLACEMENT_3D('',#425282,#425283,#425284); +#425282 = CARTESIAN_POINT('',(123.2,-64.5,-3.5E-02)); +#425283 = DIRECTION('',(0.,-0.,1.)); +#425284 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#425285 = CYLINDRICAL_SURFACE('',#425286,0.15); +#425286 = AXIS2_PLACEMENT_3D('',#425287,#425288,#425289); +#425287 = CARTESIAN_POINT('',(123.2,-64.5,-3.5E-02)); +#425288 = DIRECTION('',(-0.,0.,-1.)); +#425289 = DIRECTION('',(9.473903143467E-14,-1.,-0.)); +#425290 = ADVANCED_FACE('',(#425291,#425294),#425305,.F.); +#425291 = FACE_BOUND('',#425292,.F.); +#425292 = EDGE_LOOP('',(#425293)); +#425293 = ORIENTED_EDGE('',*,*,#425279,.T.); +#425294 = FACE_BOUND('',#425295,.F.); +#425295 = EDGE_LOOP('',(#425296)); +#425296 = ORIENTED_EDGE('',*,*,#425297,.T.); +#425297 = EDGE_CURVE('',#425298,#425298,#425300,.T.); +#425298 = VERTEX_POINT('',#425299); +#425299 = CARTESIAN_POINT('',(123.2,-64.625,-3.5E-02)); +#425300 = CIRCLE('',#425301,0.125); +#425301 = AXIS2_PLACEMENT_3D('',#425302,#425303,#425304); +#425302 = CARTESIAN_POINT('',(123.2,-64.5,-3.5E-02)); +#425303 = DIRECTION('',(-0.,0.,-1.)); +#425304 = DIRECTION('',(-0.,-1.,0.)); +#425305 = PLANE('',#425306); +#425306 = AXIS2_PLACEMENT_3D('',#425307,#425308,#425309); +#425307 = CARTESIAN_POINT('',(123.2,-64.65,-3.5E-02)); +#425308 = DIRECTION('',(0.,0.,1.)); +#425309 = DIRECTION('',(1.,0.,-0.)); +#425310 = ADVANCED_FACE('',(#425311,#425314),#425325,.T.); +#425311 = FACE_BOUND('',#425312,.T.); +#425312 = EDGE_LOOP('',(#425313)); +#425313 = ORIENTED_EDGE('',*,*,#425271,.T.); +#425314 = FACE_BOUND('',#425315,.T.); +#425315 = EDGE_LOOP('',(#425316)); +#425316 = ORIENTED_EDGE('',*,*,#425317,.T.); +#425317 = EDGE_CURVE('',#425318,#425318,#425320,.T.); +#425318 = VERTEX_POINT('',#425319); +#425319 = CARTESIAN_POINT('',(123.2,-64.625,1.545)); +#425320 = CIRCLE('',#425321,0.125); +#425321 = AXIS2_PLACEMENT_3D('',#425322,#425323,#425324); +#425322 = CARTESIAN_POINT('',(123.2,-64.5,1.545)); +#425323 = DIRECTION('',(-0.,0.,-1.)); +#425324 = DIRECTION('',(-0.,-1.,0.)); +#425325 = PLANE('',#425326); +#425326 = AXIS2_PLACEMENT_3D('',#425327,#425328,#425329); +#425327 = CARTESIAN_POINT('',(123.2,-64.65,1.545)); +#425328 = DIRECTION('',(0.,0.,1.)); +#425329 = DIRECTION('',(1.,0.,-0.)); +#425330 = ADVANCED_FACE('',(#425331),#425342,.F.); +#425331 = FACE_BOUND('',#425332,.T.); +#425332 = EDGE_LOOP('',(#425333,#425334,#425340,#425341)); +#425333 = ORIENTED_EDGE('',*,*,#425297,.T.); +#425334 = ORIENTED_EDGE('',*,*,#425335,.T.); +#425335 = EDGE_CURVE('',#425298,#425318,#425336,.T.); +#425336 = LINE('',#425337,#425338); +#425337 = CARTESIAN_POINT('',(123.2,-64.625,-3.6E-02)); +#425338 = VECTOR('',#425339,1.); +#425339 = DIRECTION('',(0.,0.,1.)); +#425340 = ORIENTED_EDGE('',*,*,#425317,.F.); +#425341 = ORIENTED_EDGE('',*,*,#425335,.F.); +#425342 = CYLINDRICAL_SURFACE('',#425343,0.125); +#425343 = AXIS2_PLACEMENT_3D('',#425344,#425345,#425346); +#425344 = CARTESIAN_POINT('',(123.2,-64.5,-3.6E-02)); +#425345 = DIRECTION('',(-0.,-0.,-1.)); +#425346 = DIRECTION('',(-0.,-1.,0.)); +#425347 = MANIFOLD_SOLID_BREP('',#425348); +#425348 = CLOSED_SHELL('',(#425349,#425382,#425402,#425422)); +#425349 = ADVANCED_FACE('',(#425350),#425377,.T.); +#425350 = FACE_BOUND('',#425351,.F.); +#425351 = EDGE_LOOP('',(#425352,#425362,#425369,#425370)); +#425352 = ORIENTED_EDGE('',*,*,#425353,.T.); +#425353 = EDGE_CURVE('',#425354,#425356,#425358,.T.); +#425354 = VERTEX_POINT('',#425355); +#425355 = CARTESIAN_POINT('',(142.5,-121.4,-3.5E-02)); +#425356 = VERTEX_POINT('',#425357); +#425357 = CARTESIAN_POINT('',(142.5,-121.4,1.545)); +#425358 = LINE('',#425359,#425360); +#425359 = CARTESIAN_POINT('',(142.5,-121.4,-3.5E-02)); +#425360 = VECTOR('',#425361,1.); +#425361 = DIRECTION('',(0.,0.,1.)); +#425362 = ORIENTED_EDGE('',*,*,#425363,.T.); +#425363 = EDGE_CURVE('',#425356,#425356,#425364,.T.); +#425364 = CIRCLE('',#425365,0.15); +#425365 = AXIS2_PLACEMENT_3D('',#425366,#425367,#425368); +#425366 = CARTESIAN_POINT('',(142.5,-121.25,1.545)); +#425367 = DIRECTION('',(0.,0.,1.)); +#425368 = DIRECTION('',(-0.,-1.,0.)); +#425369 = ORIENTED_EDGE('',*,*,#425353,.F.); +#425370 = ORIENTED_EDGE('',*,*,#425371,.F.); +#425371 = EDGE_CURVE('',#425354,#425354,#425372,.T.); +#425372 = CIRCLE('',#425373,0.15); +#425373 = AXIS2_PLACEMENT_3D('',#425374,#425375,#425376); +#425374 = CARTESIAN_POINT('',(142.5,-121.25,-3.5E-02)); +#425375 = DIRECTION('',(0.,0.,1.)); +#425376 = DIRECTION('',(-0.,-1.,0.)); +#425377 = CYLINDRICAL_SURFACE('',#425378,0.15); +#425378 = AXIS2_PLACEMENT_3D('',#425379,#425380,#425381); +#425379 = CARTESIAN_POINT('',(142.5,-121.25,-3.5E-02)); +#425380 = DIRECTION('',(-0.,-0.,-1.)); +#425381 = DIRECTION('',(-0.,-1.,0.)); +#425382 = ADVANCED_FACE('',(#425383,#425386),#425397,.F.); +#425383 = FACE_BOUND('',#425384,.F.); +#425384 = EDGE_LOOP('',(#425385)); +#425385 = ORIENTED_EDGE('',*,*,#425371,.T.); +#425386 = FACE_BOUND('',#425387,.F.); +#425387 = EDGE_LOOP('',(#425388)); +#425388 = ORIENTED_EDGE('',*,*,#425389,.T.); +#425389 = EDGE_CURVE('',#425390,#425390,#425392,.T.); +#425390 = VERTEX_POINT('',#425391); +#425391 = CARTESIAN_POINT('',(142.5,-121.375,-3.5E-02)); +#425392 = CIRCLE('',#425393,0.125); +#425393 = AXIS2_PLACEMENT_3D('',#425394,#425395,#425396); +#425394 = CARTESIAN_POINT('',(142.5,-121.25,-3.5E-02)); +#425395 = DIRECTION('',(-0.,0.,-1.)); +#425396 = DIRECTION('',(-0.,-1.,0.)); +#425397 = PLANE('',#425398); +#425398 = AXIS2_PLACEMENT_3D('',#425399,#425400,#425401); +#425399 = CARTESIAN_POINT('',(142.5,-121.4,-3.5E-02)); +#425400 = DIRECTION('',(0.,0.,1.)); +#425401 = DIRECTION('',(1.,0.,-0.)); +#425402 = ADVANCED_FACE('',(#425403,#425406),#425417,.T.); +#425403 = FACE_BOUND('',#425404,.T.); +#425404 = EDGE_LOOP('',(#425405)); +#425405 = ORIENTED_EDGE('',*,*,#425363,.T.); +#425406 = FACE_BOUND('',#425407,.T.); +#425407 = EDGE_LOOP('',(#425408)); +#425408 = ORIENTED_EDGE('',*,*,#425409,.T.); +#425409 = EDGE_CURVE('',#425410,#425410,#425412,.T.); +#425410 = VERTEX_POINT('',#425411); +#425411 = CARTESIAN_POINT('',(142.5,-121.375,1.545)); +#425412 = CIRCLE('',#425413,0.125); +#425413 = AXIS2_PLACEMENT_3D('',#425414,#425415,#425416); +#425414 = CARTESIAN_POINT('',(142.5,-121.25,1.545)); +#425415 = DIRECTION('',(-0.,0.,-1.)); +#425416 = DIRECTION('',(-0.,-1.,0.)); +#425417 = PLANE('',#425418); +#425418 = AXIS2_PLACEMENT_3D('',#425419,#425420,#425421); +#425419 = CARTESIAN_POINT('',(142.5,-121.4,1.545)); +#425420 = DIRECTION('',(0.,0.,1.)); +#425421 = DIRECTION('',(1.,0.,-0.)); +#425422 = ADVANCED_FACE('',(#425423),#425434,.F.); +#425423 = FACE_BOUND('',#425424,.T.); +#425424 = EDGE_LOOP('',(#425425,#425426,#425432,#425433)); +#425425 = ORIENTED_EDGE('',*,*,#425389,.T.); +#425426 = ORIENTED_EDGE('',*,*,#425427,.T.); +#425427 = EDGE_CURVE('',#425390,#425410,#425428,.T.); +#425428 = LINE('',#425429,#425430); +#425429 = CARTESIAN_POINT('',(142.5,-121.375,-3.6E-02)); +#425430 = VECTOR('',#425431,1.); +#425431 = DIRECTION('',(0.,0.,1.)); +#425432 = ORIENTED_EDGE('',*,*,#425409,.F.); +#425433 = ORIENTED_EDGE('',*,*,#425427,.F.); +#425434 = CYLINDRICAL_SURFACE('',#425435,0.125); +#425435 = AXIS2_PLACEMENT_3D('',#425436,#425437,#425438); +#425436 = CARTESIAN_POINT('',(142.5,-121.25,-3.6E-02)); +#425437 = DIRECTION('',(-0.,-0.,-1.)); +#425438 = DIRECTION('',(-0.,-1.,0.)); +#425439 = MANIFOLD_SOLID_BREP('',#425440); +#425440 = CLOSED_SHELL('',(#425441,#425474,#425494,#425514)); +#425441 = ADVANCED_FACE('',(#425442),#425469,.T.); +#425442 = FACE_BOUND('',#425443,.F.); +#425443 = EDGE_LOOP('',(#425444,#425454,#425461,#425462)); +#425444 = ORIENTED_EDGE('',*,*,#425445,.T.); +#425445 = EDGE_CURVE('',#425446,#425448,#425450,.T.); +#425446 = VERTEX_POINT('',#425447); +#425447 = CARTESIAN_POINT('',(133.020634,-117.85,-3.5E-02)); +#425448 = VERTEX_POINT('',#425449); +#425449 = CARTESIAN_POINT('',(133.020634,-117.85,1.545)); +#425450 = LINE('',#425451,#425452); +#425451 = CARTESIAN_POINT('',(133.020634,-117.85,-3.5E-02)); +#425452 = VECTOR('',#425453,1.); +#425453 = DIRECTION('',(0.,0.,1.)); +#425454 = ORIENTED_EDGE('',*,*,#425455,.T.); +#425455 = EDGE_CURVE('',#425448,#425448,#425456,.T.); +#425456 = CIRCLE('',#425457,0.15); +#425457 = AXIS2_PLACEMENT_3D('',#425458,#425459,#425460); +#425458 = CARTESIAN_POINT('',(133.020634,-117.7,1.545)); +#425459 = DIRECTION('',(0.,0.,1.)); +#425460 = DIRECTION('',(-0.,-1.,0.)); +#425461 = ORIENTED_EDGE('',*,*,#425445,.F.); +#425462 = ORIENTED_EDGE('',*,*,#425463,.F.); +#425463 = EDGE_CURVE('',#425446,#425446,#425464,.T.); +#425464 = CIRCLE('',#425465,0.15); +#425465 = AXIS2_PLACEMENT_3D('',#425466,#425467,#425468); +#425466 = CARTESIAN_POINT('',(133.020634,-117.7,-3.5E-02)); +#425467 = DIRECTION('',(0.,0.,1.)); +#425468 = DIRECTION('',(-0.,-1.,0.)); +#425469 = CYLINDRICAL_SURFACE('',#425470,0.15); +#425470 = AXIS2_PLACEMENT_3D('',#425471,#425472,#425473); +#425471 = CARTESIAN_POINT('',(133.020634,-117.7,-3.5E-02)); +#425472 = DIRECTION('',(-0.,-0.,-1.)); +#425473 = DIRECTION('',(-0.,-1.,0.)); +#425474 = ADVANCED_FACE('',(#425475,#425478),#425489,.F.); +#425475 = FACE_BOUND('',#425476,.F.); +#425476 = EDGE_LOOP('',(#425477)); +#425477 = ORIENTED_EDGE('',*,*,#425463,.T.); +#425478 = FACE_BOUND('',#425479,.F.); +#425479 = EDGE_LOOP('',(#425480)); +#425480 = ORIENTED_EDGE('',*,*,#425481,.T.); +#425481 = EDGE_CURVE('',#425482,#425482,#425484,.T.); +#425482 = VERTEX_POINT('',#425483); +#425483 = CARTESIAN_POINT('',(133.020634,-117.825,-3.5E-02)); +#425484 = CIRCLE('',#425485,0.125); +#425485 = AXIS2_PLACEMENT_3D('',#425486,#425487,#425488); +#425486 = CARTESIAN_POINT('',(133.020634,-117.7,-3.5E-02)); +#425487 = DIRECTION('',(-0.,0.,-1.)); +#425488 = DIRECTION('',(-0.,-1.,0.)); +#425489 = PLANE('',#425490); +#425490 = AXIS2_PLACEMENT_3D('',#425491,#425492,#425493); +#425491 = CARTESIAN_POINT('',(133.020634,-117.85,-3.5E-02)); +#425492 = DIRECTION('',(0.,0.,1.)); +#425493 = DIRECTION('',(1.,0.,-0.)); +#425494 = ADVANCED_FACE('',(#425495,#425498),#425509,.T.); +#425495 = FACE_BOUND('',#425496,.T.); +#425496 = EDGE_LOOP('',(#425497)); +#425497 = ORIENTED_EDGE('',*,*,#425455,.T.); +#425498 = FACE_BOUND('',#425499,.T.); +#425499 = EDGE_LOOP('',(#425500)); +#425500 = ORIENTED_EDGE('',*,*,#425501,.T.); +#425501 = EDGE_CURVE('',#425502,#425502,#425504,.T.); +#425502 = VERTEX_POINT('',#425503); +#425503 = CARTESIAN_POINT('',(133.020634,-117.825,1.545)); +#425504 = CIRCLE('',#425505,0.125); +#425505 = AXIS2_PLACEMENT_3D('',#425506,#425507,#425508); +#425506 = CARTESIAN_POINT('',(133.020634,-117.7,1.545)); +#425507 = DIRECTION('',(-0.,0.,-1.)); +#425508 = DIRECTION('',(-0.,-1.,0.)); +#425509 = PLANE('',#425510); +#425510 = AXIS2_PLACEMENT_3D('',#425511,#425512,#425513); +#425511 = CARTESIAN_POINT('',(133.020634,-117.85,1.545)); +#425512 = DIRECTION('',(0.,0.,1.)); +#425513 = DIRECTION('',(1.,0.,-0.)); +#425514 = ADVANCED_FACE('',(#425515),#425526,.F.); +#425515 = FACE_BOUND('',#425516,.T.); +#425516 = EDGE_LOOP('',(#425517,#425518,#425524,#425525)); +#425517 = ORIENTED_EDGE('',*,*,#425481,.T.); +#425518 = ORIENTED_EDGE('',*,*,#425519,.T.); +#425519 = EDGE_CURVE('',#425482,#425502,#425520,.T.); +#425520 = LINE('',#425521,#425522); +#425521 = CARTESIAN_POINT('',(133.020634,-117.825,-3.6E-02)); +#425522 = VECTOR('',#425523,1.); +#425523 = DIRECTION('',(0.,0.,1.)); +#425524 = ORIENTED_EDGE('',*,*,#425501,.F.); +#425525 = ORIENTED_EDGE('',*,*,#425519,.F.); +#425526 = CYLINDRICAL_SURFACE('',#425527,0.125); +#425527 = AXIS2_PLACEMENT_3D('',#425528,#425529,#425530); +#425528 = CARTESIAN_POINT('',(133.020634,-117.7,-3.6E-02)); +#425529 = DIRECTION('',(-0.,-0.,-1.)); +#425530 = DIRECTION('',(-0.,-1.,0.)); +#425531 = MANIFOLD_SOLID_BREP('',#425532); +#425532 = CLOSED_SHELL('',(#425533,#425566,#425586,#425606)); +#425533 = ADVANCED_FACE('',(#425534),#425561,.T.); +#425534 = FACE_BOUND('',#425535,.F.); +#425535 = EDGE_LOOP('',(#425536,#425546,#425553,#425554)); +#425536 = ORIENTED_EDGE('',*,*,#425537,.T.); +#425537 = EDGE_CURVE('',#425538,#425540,#425542,.T.); +#425538 = VERTEX_POINT('',#425539); +#425539 = CARTESIAN_POINT('',(147.5,-119.15,-3.5E-02)); +#425540 = VERTEX_POINT('',#425541); +#425541 = CARTESIAN_POINT('',(147.5,-119.15,1.545)); +#425542 = LINE('',#425543,#425544); +#425543 = CARTESIAN_POINT('',(147.5,-119.15,-3.5E-02)); +#425544 = VECTOR('',#425545,1.); +#425545 = DIRECTION('',(0.,0.,1.)); +#425546 = ORIENTED_EDGE('',*,*,#425547,.T.); +#425547 = EDGE_CURVE('',#425540,#425540,#425548,.T.); +#425548 = CIRCLE('',#425549,0.15); +#425549 = AXIS2_PLACEMENT_3D('',#425550,#425551,#425552); +#425550 = CARTESIAN_POINT('',(147.5,-119.,1.545)); +#425551 = DIRECTION('',(0.,0.,1.)); +#425552 = DIRECTION('',(-0.,-1.,0.)); +#425553 = ORIENTED_EDGE('',*,*,#425537,.F.); +#425554 = ORIENTED_EDGE('',*,*,#425555,.F.); +#425555 = EDGE_CURVE('',#425538,#425538,#425556,.T.); +#425556 = CIRCLE('',#425557,0.15); +#425557 = AXIS2_PLACEMENT_3D('',#425558,#425559,#425560); +#425558 = CARTESIAN_POINT('',(147.5,-119.,-3.5E-02)); +#425559 = DIRECTION('',(0.,0.,1.)); +#425560 = DIRECTION('',(-0.,-1.,0.)); +#425561 = CYLINDRICAL_SURFACE('',#425562,0.15); +#425562 = AXIS2_PLACEMENT_3D('',#425563,#425564,#425565); +#425563 = CARTESIAN_POINT('',(147.5,-119.,-3.5E-02)); +#425564 = DIRECTION('',(-0.,-0.,-1.)); +#425565 = DIRECTION('',(-0.,-1.,0.)); +#425566 = ADVANCED_FACE('',(#425567,#425570),#425581,.F.); +#425567 = FACE_BOUND('',#425568,.F.); +#425568 = EDGE_LOOP('',(#425569)); +#425569 = ORIENTED_EDGE('',*,*,#425555,.T.); +#425570 = FACE_BOUND('',#425571,.F.); +#425571 = EDGE_LOOP('',(#425572)); +#425572 = ORIENTED_EDGE('',*,*,#425573,.T.); +#425573 = EDGE_CURVE('',#425574,#425574,#425576,.T.); +#425574 = VERTEX_POINT('',#425575); +#425575 = CARTESIAN_POINT('',(147.5,-119.125,-3.5E-02)); +#425576 = CIRCLE('',#425577,0.125); +#425577 = AXIS2_PLACEMENT_3D('',#425578,#425579,#425580); +#425578 = CARTESIAN_POINT('',(147.5,-119.,-3.5E-02)); +#425579 = DIRECTION('',(-0.,0.,-1.)); +#425580 = DIRECTION('',(-0.,-1.,0.)); +#425581 = PLANE('',#425582); +#425582 = AXIS2_PLACEMENT_3D('',#425583,#425584,#425585); +#425583 = CARTESIAN_POINT('',(147.5,-119.15,-3.5E-02)); +#425584 = DIRECTION('',(0.,0.,1.)); +#425585 = DIRECTION('',(1.,0.,-0.)); +#425586 = ADVANCED_FACE('',(#425587,#425590),#425601,.T.); +#425587 = FACE_BOUND('',#425588,.T.); +#425588 = EDGE_LOOP('',(#425589)); +#425589 = ORIENTED_EDGE('',*,*,#425547,.T.); +#425590 = FACE_BOUND('',#425591,.T.); +#425591 = EDGE_LOOP('',(#425592)); +#425592 = ORIENTED_EDGE('',*,*,#425593,.T.); +#425593 = EDGE_CURVE('',#425594,#425594,#425596,.T.); +#425594 = VERTEX_POINT('',#425595); +#425595 = CARTESIAN_POINT('',(147.5,-119.125,1.545)); +#425596 = CIRCLE('',#425597,0.125); +#425597 = AXIS2_PLACEMENT_3D('',#425598,#425599,#425600); +#425598 = CARTESIAN_POINT('',(147.5,-119.,1.545)); +#425599 = DIRECTION('',(-0.,0.,-1.)); +#425600 = DIRECTION('',(-0.,-1.,0.)); +#425601 = PLANE('',#425602); +#425602 = AXIS2_PLACEMENT_3D('',#425603,#425604,#425605); +#425603 = CARTESIAN_POINT('',(147.5,-119.15,1.545)); +#425604 = DIRECTION('',(0.,0.,1.)); +#425605 = DIRECTION('',(1.,0.,-0.)); +#425606 = ADVANCED_FACE('',(#425607),#425618,.F.); +#425607 = FACE_BOUND('',#425608,.T.); +#425608 = EDGE_LOOP('',(#425609,#425610,#425616,#425617)); +#425609 = ORIENTED_EDGE('',*,*,#425573,.T.); +#425610 = ORIENTED_EDGE('',*,*,#425611,.T.); +#425611 = EDGE_CURVE('',#425574,#425594,#425612,.T.); +#425612 = LINE('',#425613,#425614); +#425613 = CARTESIAN_POINT('',(147.5,-119.125,-3.6E-02)); +#425614 = VECTOR('',#425615,1.); +#425615 = DIRECTION('',(0.,0.,1.)); +#425616 = ORIENTED_EDGE('',*,*,#425593,.F.); +#425617 = ORIENTED_EDGE('',*,*,#425611,.F.); +#425618 = CYLINDRICAL_SURFACE('',#425619,0.125); +#425619 = AXIS2_PLACEMENT_3D('',#425620,#425621,#425622); +#425620 = CARTESIAN_POINT('',(147.5,-119.,-3.6E-02)); +#425621 = DIRECTION('',(-0.,-0.,-1.)); +#425622 = DIRECTION('',(-0.,-1.,0.)); +#425623 = MANIFOLD_SOLID_BREP('',#425624); +#425624 = CLOSED_SHELL('',(#425625,#425658,#425678,#425698)); +#425625 = ADVANCED_FACE('',(#425626),#425653,.T.); +#425626 = FACE_BOUND('',#425627,.F.); +#425627 = EDGE_LOOP('',(#425628,#425638,#425645,#425646)); +#425628 = ORIENTED_EDGE('',*,*,#425629,.T.); +#425629 = EDGE_CURVE('',#425630,#425632,#425634,.T.); +#425630 = VERTEX_POINT('',#425631); +#425631 = CARTESIAN_POINT('',(135.9,-157.35,-3.5E-02)); +#425632 = VERTEX_POINT('',#425633); +#425633 = CARTESIAN_POINT('',(135.9,-157.35,1.545)); +#425634 = LINE('',#425635,#425636); +#425635 = CARTESIAN_POINT('',(135.9,-157.35,-3.5E-02)); +#425636 = VECTOR('',#425637,1.); +#425637 = DIRECTION('',(0.,0.,1.)); +#425638 = ORIENTED_EDGE('',*,*,#425639,.T.); +#425639 = EDGE_CURVE('',#425632,#425632,#425640,.T.); +#425640 = CIRCLE('',#425641,0.15); +#425641 = AXIS2_PLACEMENT_3D('',#425642,#425643,#425644); +#425642 = CARTESIAN_POINT('',(135.9,-157.2,1.545)); +#425643 = DIRECTION('',(0.,0.,1.)); +#425644 = DIRECTION('',(-0.,-1.,0.)); +#425645 = ORIENTED_EDGE('',*,*,#425629,.F.); +#425646 = ORIENTED_EDGE('',*,*,#425647,.F.); +#425647 = EDGE_CURVE('',#425630,#425630,#425648,.T.); +#425648 = CIRCLE('',#425649,0.15); +#425649 = AXIS2_PLACEMENT_3D('',#425650,#425651,#425652); +#425650 = CARTESIAN_POINT('',(135.9,-157.2,-3.5E-02)); +#425651 = DIRECTION('',(0.,0.,1.)); +#425652 = DIRECTION('',(-0.,-1.,0.)); +#425653 = CYLINDRICAL_SURFACE('',#425654,0.15); +#425654 = AXIS2_PLACEMENT_3D('',#425655,#425656,#425657); +#425655 = CARTESIAN_POINT('',(135.9,-157.2,-3.5E-02)); +#425656 = DIRECTION('',(-0.,-0.,-1.)); +#425657 = DIRECTION('',(-0.,-1.,0.)); +#425658 = ADVANCED_FACE('',(#425659,#425662),#425673,.F.); +#425659 = FACE_BOUND('',#425660,.F.); +#425660 = EDGE_LOOP('',(#425661)); +#425661 = ORIENTED_EDGE('',*,*,#425647,.T.); +#425662 = FACE_BOUND('',#425663,.F.); +#425663 = EDGE_LOOP('',(#425664)); +#425664 = ORIENTED_EDGE('',*,*,#425665,.T.); +#425665 = EDGE_CURVE('',#425666,#425666,#425668,.T.); +#425666 = VERTEX_POINT('',#425667); +#425667 = CARTESIAN_POINT('',(135.9,-157.325,-3.5E-02)); +#425668 = CIRCLE('',#425669,0.125); +#425669 = AXIS2_PLACEMENT_3D('',#425670,#425671,#425672); +#425670 = CARTESIAN_POINT('',(135.9,-157.2,-3.5E-02)); +#425671 = DIRECTION('',(-0.,0.,-1.)); +#425672 = DIRECTION('',(-0.,-1.,0.)); +#425673 = PLANE('',#425674); +#425674 = AXIS2_PLACEMENT_3D('',#425675,#425676,#425677); +#425675 = CARTESIAN_POINT('',(135.9,-157.35,-3.5E-02)); +#425676 = DIRECTION('',(0.,0.,1.)); +#425677 = DIRECTION('',(1.,0.,-0.)); +#425678 = ADVANCED_FACE('',(#425679,#425682),#425693,.T.); +#425679 = FACE_BOUND('',#425680,.T.); +#425680 = EDGE_LOOP('',(#425681)); +#425681 = ORIENTED_EDGE('',*,*,#425639,.T.); +#425682 = FACE_BOUND('',#425683,.T.); +#425683 = EDGE_LOOP('',(#425684)); +#425684 = ORIENTED_EDGE('',*,*,#425685,.T.); +#425685 = EDGE_CURVE('',#425686,#425686,#425688,.T.); +#425686 = VERTEX_POINT('',#425687); +#425687 = CARTESIAN_POINT('',(135.9,-157.325,1.545)); +#425688 = CIRCLE('',#425689,0.125); +#425689 = AXIS2_PLACEMENT_3D('',#425690,#425691,#425692); +#425690 = CARTESIAN_POINT('',(135.9,-157.2,1.545)); +#425691 = DIRECTION('',(-0.,0.,-1.)); +#425692 = DIRECTION('',(-0.,-1.,0.)); +#425693 = PLANE('',#425694); +#425694 = AXIS2_PLACEMENT_3D('',#425695,#425696,#425697); +#425695 = CARTESIAN_POINT('',(135.9,-157.35,1.545)); +#425696 = DIRECTION('',(0.,0.,1.)); +#425697 = DIRECTION('',(1.,0.,-0.)); +#425698 = ADVANCED_FACE('',(#425699),#425710,.F.); +#425699 = FACE_BOUND('',#425700,.T.); +#425700 = EDGE_LOOP('',(#425701,#425702,#425708,#425709)); +#425701 = ORIENTED_EDGE('',*,*,#425665,.T.); +#425702 = ORIENTED_EDGE('',*,*,#425703,.T.); +#425703 = EDGE_CURVE('',#425666,#425686,#425704,.T.); +#425704 = LINE('',#425705,#425706); +#425705 = CARTESIAN_POINT('',(135.9,-157.325,-3.6E-02)); +#425706 = VECTOR('',#425707,1.); +#425707 = DIRECTION('',(0.,0.,1.)); +#425708 = ORIENTED_EDGE('',*,*,#425685,.F.); +#425709 = ORIENTED_EDGE('',*,*,#425703,.F.); +#425710 = CYLINDRICAL_SURFACE('',#425711,0.125); +#425711 = AXIS2_PLACEMENT_3D('',#425712,#425713,#425714); +#425712 = CARTESIAN_POINT('',(135.9,-157.2,-3.6E-02)); +#425713 = DIRECTION('',(-0.,-0.,-1.)); +#425714 = DIRECTION('',(-0.,-1.,0.)); +#425715 = MANIFOLD_SOLID_BREP('',#425716); +#425716 = CLOSED_SHELL('',(#425717,#425750,#425770,#425790)); +#425717 = ADVANCED_FACE('',(#425718),#425745,.T.); +#425718 = FACE_BOUND('',#425719,.F.); +#425719 = EDGE_LOOP('',(#425720,#425730,#425737,#425738)); +#425720 = ORIENTED_EDGE('',*,*,#425721,.T.); +#425721 = EDGE_CURVE('',#425722,#425724,#425726,.T.); +#425722 = VERTEX_POINT('',#425723); +#425723 = CARTESIAN_POINT('',(124.5,-100.65,-3.5E-02)); +#425724 = VERTEX_POINT('',#425725); +#425725 = CARTESIAN_POINT('',(124.5,-100.65,1.545)); +#425726 = LINE('',#425727,#425728); +#425727 = CARTESIAN_POINT('',(124.5,-100.65,-3.5E-02)); +#425728 = VECTOR('',#425729,1.); +#425729 = DIRECTION('',(0.,0.,1.)); +#425730 = ORIENTED_EDGE('',*,*,#425731,.T.); +#425731 = EDGE_CURVE('',#425724,#425724,#425732,.T.); +#425732 = CIRCLE('',#425733,0.15); +#425733 = AXIS2_PLACEMENT_3D('',#425734,#425735,#425736); +#425734 = CARTESIAN_POINT('',(124.5,-100.5,1.545)); +#425735 = DIRECTION('',(0.,0.,1.)); +#425736 = DIRECTION('',(-0.,-1.,0.)); +#425737 = ORIENTED_EDGE('',*,*,#425721,.F.); +#425738 = ORIENTED_EDGE('',*,*,#425739,.F.); +#425739 = EDGE_CURVE('',#425722,#425722,#425740,.T.); +#425740 = CIRCLE('',#425741,0.15); +#425741 = AXIS2_PLACEMENT_3D('',#425742,#425743,#425744); +#425742 = CARTESIAN_POINT('',(124.5,-100.5,-3.5E-02)); +#425743 = DIRECTION('',(0.,0.,1.)); +#425744 = DIRECTION('',(-0.,-1.,0.)); +#425745 = CYLINDRICAL_SURFACE('',#425746,0.15); +#425746 = AXIS2_PLACEMENT_3D('',#425747,#425748,#425749); +#425747 = CARTESIAN_POINT('',(124.5,-100.5,-3.5E-02)); +#425748 = DIRECTION('',(-0.,-0.,-1.)); +#425749 = DIRECTION('',(-0.,-1.,0.)); +#425750 = ADVANCED_FACE('',(#425751,#425754),#425765,.F.); +#425751 = FACE_BOUND('',#425752,.F.); +#425752 = EDGE_LOOP('',(#425753)); +#425753 = ORIENTED_EDGE('',*,*,#425739,.T.); +#425754 = FACE_BOUND('',#425755,.F.); +#425755 = EDGE_LOOP('',(#425756)); +#425756 = ORIENTED_EDGE('',*,*,#425757,.T.); +#425757 = EDGE_CURVE('',#425758,#425758,#425760,.T.); +#425758 = VERTEX_POINT('',#425759); +#425759 = CARTESIAN_POINT('',(124.5,-100.625,-3.5E-02)); +#425760 = CIRCLE('',#425761,0.125); +#425761 = AXIS2_PLACEMENT_3D('',#425762,#425763,#425764); +#425762 = CARTESIAN_POINT('',(124.5,-100.5,-3.5E-02)); +#425763 = DIRECTION('',(-0.,0.,-1.)); +#425764 = DIRECTION('',(-0.,-1.,0.)); +#425765 = PLANE('',#425766); +#425766 = AXIS2_PLACEMENT_3D('',#425767,#425768,#425769); +#425767 = CARTESIAN_POINT('',(124.5,-100.65,-3.5E-02)); +#425768 = DIRECTION('',(0.,0.,1.)); +#425769 = DIRECTION('',(1.,0.,-0.)); +#425770 = ADVANCED_FACE('',(#425771,#425774),#425785,.T.); +#425771 = FACE_BOUND('',#425772,.T.); +#425772 = EDGE_LOOP('',(#425773)); +#425773 = ORIENTED_EDGE('',*,*,#425731,.T.); +#425774 = FACE_BOUND('',#425775,.T.); +#425775 = EDGE_LOOP('',(#425776)); +#425776 = ORIENTED_EDGE('',*,*,#425777,.T.); +#425777 = EDGE_CURVE('',#425778,#425778,#425780,.T.); +#425778 = VERTEX_POINT('',#425779); +#425779 = CARTESIAN_POINT('',(124.5,-100.625,1.545)); +#425780 = CIRCLE('',#425781,0.125); +#425781 = AXIS2_PLACEMENT_3D('',#425782,#425783,#425784); +#425782 = CARTESIAN_POINT('',(124.5,-100.5,1.545)); +#425783 = DIRECTION('',(-0.,0.,-1.)); +#425784 = DIRECTION('',(-0.,-1.,0.)); +#425785 = PLANE('',#425786); +#425786 = AXIS2_PLACEMENT_3D('',#425787,#425788,#425789); +#425787 = CARTESIAN_POINT('',(124.5,-100.65,1.545)); +#425788 = DIRECTION('',(0.,0.,1.)); +#425789 = DIRECTION('',(1.,0.,-0.)); +#425790 = ADVANCED_FACE('',(#425791),#425802,.F.); +#425791 = FACE_BOUND('',#425792,.T.); +#425792 = EDGE_LOOP('',(#425793,#425794,#425800,#425801)); +#425793 = ORIENTED_EDGE('',*,*,#425757,.T.); +#425794 = ORIENTED_EDGE('',*,*,#425795,.T.); +#425795 = EDGE_CURVE('',#425758,#425778,#425796,.T.); +#425796 = LINE('',#425797,#425798); +#425797 = CARTESIAN_POINT('',(124.5,-100.625,-3.6E-02)); +#425798 = VECTOR('',#425799,1.); +#425799 = DIRECTION('',(0.,0.,1.)); +#425800 = ORIENTED_EDGE('',*,*,#425777,.F.); +#425801 = ORIENTED_EDGE('',*,*,#425795,.F.); +#425802 = CYLINDRICAL_SURFACE('',#425803,0.125); +#425803 = AXIS2_PLACEMENT_3D('',#425804,#425805,#425806); +#425804 = CARTESIAN_POINT('',(124.5,-100.5,-3.6E-02)); +#425805 = DIRECTION('',(-0.,-0.,-1.)); +#425806 = DIRECTION('',(-0.,-1.,0.)); +#425807 = MANIFOLD_SOLID_BREP('',#425808); +#425808 = CLOSED_SHELL('',(#425809,#425842,#425862,#425882)); +#425809 = ADVANCED_FACE('',(#425810),#425837,.T.); +#425810 = FACE_BOUND('',#425811,.F.); +#425811 = EDGE_LOOP('',(#425812,#425822,#425829,#425830)); +#425812 = ORIENTED_EDGE('',*,*,#425813,.T.); +#425813 = EDGE_CURVE('',#425814,#425816,#425818,.T.); +#425814 = VERTEX_POINT('',#425815); +#425815 = CARTESIAN_POINT('',(142.25,-112.65,-3.5E-02)); +#425816 = VERTEX_POINT('',#425817); +#425817 = CARTESIAN_POINT('',(142.25,-112.65,1.545)); +#425818 = LINE('',#425819,#425820); +#425819 = CARTESIAN_POINT('',(142.25,-112.65,-3.5E-02)); +#425820 = VECTOR('',#425821,1.); +#425821 = DIRECTION('',(0.,0.,1.)); +#425822 = ORIENTED_EDGE('',*,*,#425823,.T.); +#425823 = EDGE_CURVE('',#425816,#425816,#425824,.T.); +#425824 = CIRCLE('',#425825,0.15); +#425825 = AXIS2_PLACEMENT_3D('',#425826,#425827,#425828); +#425826 = CARTESIAN_POINT('',(142.25,-112.5,1.545)); +#425827 = DIRECTION('',(0.,0.,1.)); +#425828 = DIRECTION('',(-0.,-1.,0.)); +#425829 = ORIENTED_EDGE('',*,*,#425813,.F.); +#425830 = ORIENTED_EDGE('',*,*,#425831,.F.); +#425831 = EDGE_CURVE('',#425814,#425814,#425832,.T.); +#425832 = CIRCLE('',#425833,0.15); +#425833 = AXIS2_PLACEMENT_3D('',#425834,#425835,#425836); +#425834 = CARTESIAN_POINT('',(142.25,-112.5,-3.5E-02)); +#425835 = DIRECTION('',(0.,0.,1.)); +#425836 = DIRECTION('',(-0.,-1.,0.)); +#425837 = CYLINDRICAL_SURFACE('',#425838,0.15); +#425838 = AXIS2_PLACEMENT_3D('',#425839,#425840,#425841); +#425839 = CARTESIAN_POINT('',(142.25,-112.5,-3.5E-02)); +#425840 = DIRECTION('',(-0.,-0.,-1.)); +#425841 = DIRECTION('',(-0.,-1.,0.)); +#425842 = ADVANCED_FACE('',(#425843,#425846),#425857,.F.); +#425843 = FACE_BOUND('',#425844,.F.); +#425844 = EDGE_LOOP('',(#425845)); +#425845 = ORIENTED_EDGE('',*,*,#425831,.T.); +#425846 = FACE_BOUND('',#425847,.F.); +#425847 = EDGE_LOOP('',(#425848)); +#425848 = ORIENTED_EDGE('',*,*,#425849,.T.); +#425849 = EDGE_CURVE('',#425850,#425850,#425852,.T.); +#425850 = VERTEX_POINT('',#425851); +#425851 = CARTESIAN_POINT('',(142.25,-112.625,-3.5E-02)); +#425852 = CIRCLE('',#425853,0.125); +#425853 = AXIS2_PLACEMENT_3D('',#425854,#425855,#425856); +#425854 = CARTESIAN_POINT('',(142.25,-112.5,-3.5E-02)); +#425855 = DIRECTION('',(-0.,0.,-1.)); +#425856 = DIRECTION('',(-0.,-1.,0.)); +#425857 = PLANE('',#425858); +#425858 = AXIS2_PLACEMENT_3D('',#425859,#425860,#425861); +#425859 = CARTESIAN_POINT('',(142.25,-112.65,-3.5E-02)); +#425860 = DIRECTION('',(0.,0.,1.)); +#425861 = DIRECTION('',(1.,0.,-0.)); +#425862 = ADVANCED_FACE('',(#425863,#425866),#425877,.T.); +#425863 = FACE_BOUND('',#425864,.T.); +#425864 = EDGE_LOOP('',(#425865)); +#425865 = ORIENTED_EDGE('',*,*,#425823,.T.); +#425866 = FACE_BOUND('',#425867,.T.); +#425867 = EDGE_LOOP('',(#425868)); +#425868 = ORIENTED_EDGE('',*,*,#425869,.T.); +#425869 = EDGE_CURVE('',#425870,#425870,#425872,.T.); +#425870 = VERTEX_POINT('',#425871); +#425871 = CARTESIAN_POINT('',(142.25,-112.625,1.545)); +#425872 = CIRCLE('',#425873,0.125); +#425873 = AXIS2_PLACEMENT_3D('',#425874,#425875,#425876); +#425874 = CARTESIAN_POINT('',(142.25,-112.5,1.545)); +#425875 = DIRECTION('',(-0.,0.,-1.)); +#425876 = DIRECTION('',(-0.,-1.,0.)); +#425877 = PLANE('',#425878); +#425878 = AXIS2_PLACEMENT_3D('',#425879,#425880,#425881); +#425879 = CARTESIAN_POINT('',(142.25,-112.65,1.545)); +#425880 = DIRECTION('',(0.,0.,1.)); +#425881 = DIRECTION('',(1.,0.,-0.)); +#425882 = ADVANCED_FACE('',(#425883),#425894,.F.); +#425883 = FACE_BOUND('',#425884,.T.); +#425884 = EDGE_LOOP('',(#425885,#425886,#425892,#425893)); +#425885 = ORIENTED_EDGE('',*,*,#425849,.T.); +#425886 = ORIENTED_EDGE('',*,*,#425887,.T.); +#425887 = EDGE_CURVE('',#425850,#425870,#425888,.T.); +#425888 = LINE('',#425889,#425890); +#425889 = CARTESIAN_POINT('',(142.25,-112.625,-3.6E-02)); +#425890 = VECTOR('',#425891,1.); +#425891 = DIRECTION('',(0.,0.,1.)); +#425892 = ORIENTED_EDGE('',*,*,#425869,.F.); +#425893 = ORIENTED_EDGE('',*,*,#425887,.F.); +#425894 = CYLINDRICAL_SURFACE('',#425895,0.125); +#425895 = AXIS2_PLACEMENT_3D('',#425896,#425897,#425898); +#425896 = CARTESIAN_POINT('',(142.25,-112.5,-3.6E-02)); +#425897 = DIRECTION('',(-0.,-0.,-1.)); +#425898 = DIRECTION('',(-0.,-1.,0.)); +#425899 = MANIFOLD_SOLID_BREP('',#425900); +#425900 = CLOSED_SHELL('',(#425901,#425934,#425954,#425974)); +#425901 = ADVANCED_FACE('',(#425902),#425929,.T.); +#425902 = FACE_BOUND('',#425903,.F.); +#425903 = EDGE_LOOP('',(#425904,#425914,#425921,#425922)); +#425904 = ORIENTED_EDGE('',*,*,#425905,.T.); +#425905 = EDGE_CURVE('',#425906,#425908,#425910,.T.); +#425906 = VERTEX_POINT('',#425907); +#425907 = CARTESIAN_POINT('',(138.8,-75.75,-3.5E-02)); +#425908 = VERTEX_POINT('',#425909); +#425909 = CARTESIAN_POINT('',(138.8,-75.75,1.545)); +#425910 = LINE('',#425911,#425912); +#425911 = CARTESIAN_POINT('',(138.8,-75.75,-3.5E-02)); +#425912 = VECTOR('',#425913,1.); +#425913 = DIRECTION('',(0.,0.,1.)); +#425914 = ORIENTED_EDGE('',*,*,#425915,.T.); +#425915 = EDGE_CURVE('',#425908,#425908,#425916,.T.); +#425916 = CIRCLE('',#425917,0.15); +#425917 = AXIS2_PLACEMENT_3D('',#425918,#425919,#425920); +#425918 = CARTESIAN_POINT('',(138.8,-75.6,1.545)); +#425919 = DIRECTION('',(0.,0.,1.)); +#425920 = DIRECTION('',(-0.,-1.,0.)); +#425921 = ORIENTED_EDGE('',*,*,#425905,.F.); +#425922 = ORIENTED_EDGE('',*,*,#425923,.F.); +#425923 = EDGE_CURVE('',#425906,#425906,#425924,.T.); +#425924 = CIRCLE('',#425925,0.15); +#425925 = AXIS2_PLACEMENT_3D('',#425926,#425927,#425928); +#425926 = CARTESIAN_POINT('',(138.8,-75.6,-3.5E-02)); +#425927 = DIRECTION('',(0.,0.,1.)); +#425928 = DIRECTION('',(-0.,-1.,0.)); +#425929 = CYLINDRICAL_SURFACE('',#425930,0.15); +#425930 = AXIS2_PLACEMENT_3D('',#425931,#425932,#425933); +#425931 = CARTESIAN_POINT('',(138.8,-75.6,-3.5E-02)); +#425932 = DIRECTION('',(-0.,-0.,-1.)); +#425933 = DIRECTION('',(-0.,-1.,0.)); +#425934 = ADVANCED_FACE('',(#425935,#425938),#425949,.F.); +#425935 = FACE_BOUND('',#425936,.F.); +#425936 = EDGE_LOOP('',(#425937)); +#425937 = ORIENTED_EDGE('',*,*,#425923,.T.); +#425938 = FACE_BOUND('',#425939,.F.); +#425939 = EDGE_LOOP('',(#425940)); +#425940 = ORIENTED_EDGE('',*,*,#425941,.T.); +#425941 = EDGE_CURVE('',#425942,#425942,#425944,.T.); +#425942 = VERTEX_POINT('',#425943); +#425943 = CARTESIAN_POINT('',(138.8,-75.725,-3.5E-02)); +#425944 = CIRCLE('',#425945,0.125); +#425945 = AXIS2_PLACEMENT_3D('',#425946,#425947,#425948); +#425946 = CARTESIAN_POINT('',(138.8,-75.6,-3.5E-02)); +#425947 = DIRECTION('',(-0.,0.,-1.)); +#425948 = DIRECTION('',(-0.,-1.,0.)); +#425949 = PLANE('',#425950); +#425950 = AXIS2_PLACEMENT_3D('',#425951,#425952,#425953); +#425951 = CARTESIAN_POINT('',(138.8,-75.75,-3.5E-02)); +#425952 = DIRECTION('',(0.,0.,1.)); +#425953 = DIRECTION('',(1.,0.,-0.)); +#425954 = ADVANCED_FACE('',(#425955,#425958),#425969,.T.); +#425955 = FACE_BOUND('',#425956,.T.); +#425956 = EDGE_LOOP('',(#425957)); +#425957 = ORIENTED_EDGE('',*,*,#425915,.T.); +#425958 = FACE_BOUND('',#425959,.T.); +#425959 = EDGE_LOOP('',(#425960)); +#425960 = ORIENTED_EDGE('',*,*,#425961,.T.); +#425961 = EDGE_CURVE('',#425962,#425962,#425964,.T.); +#425962 = VERTEX_POINT('',#425963); +#425963 = CARTESIAN_POINT('',(138.8,-75.725,1.545)); +#425964 = CIRCLE('',#425965,0.125); +#425965 = AXIS2_PLACEMENT_3D('',#425966,#425967,#425968); +#425966 = CARTESIAN_POINT('',(138.8,-75.6,1.545)); +#425967 = DIRECTION('',(-0.,0.,-1.)); +#425968 = DIRECTION('',(-0.,-1.,0.)); +#425969 = PLANE('',#425970); +#425970 = AXIS2_PLACEMENT_3D('',#425971,#425972,#425973); +#425971 = CARTESIAN_POINT('',(138.8,-75.75,1.545)); +#425972 = DIRECTION('',(0.,0.,1.)); +#425973 = DIRECTION('',(1.,0.,-0.)); +#425974 = ADVANCED_FACE('',(#425975),#425986,.F.); +#425975 = FACE_BOUND('',#425976,.T.); +#425976 = EDGE_LOOP('',(#425977,#425978,#425984,#425985)); +#425977 = ORIENTED_EDGE('',*,*,#425941,.T.); +#425978 = ORIENTED_EDGE('',*,*,#425979,.T.); +#425979 = EDGE_CURVE('',#425942,#425962,#425980,.T.); +#425980 = LINE('',#425981,#425982); +#425981 = CARTESIAN_POINT('',(138.8,-75.725,-3.6E-02)); +#425982 = VECTOR('',#425983,1.); +#425983 = DIRECTION('',(0.,0.,1.)); +#425984 = ORIENTED_EDGE('',*,*,#425961,.F.); +#425985 = ORIENTED_EDGE('',*,*,#425979,.F.); +#425986 = CYLINDRICAL_SURFACE('',#425987,0.125); +#425987 = AXIS2_PLACEMENT_3D('',#425988,#425989,#425990); +#425988 = CARTESIAN_POINT('',(138.8,-75.6,-3.6E-02)); +#425989 = DIRECTION('',(-0.,-0.,-1.)); +#425990 = DIRECTION('',(-0.,-1.,0.)); +#425991 = MANIFOLD_SOLID_BREP('',#425992); +#425992 = CLOSED_SHELL('',(#425993,#426026,#426046,#426066)); +#425993 = ADVANCED_FACE('',(#425994),#426021,.T.); +#425994 = FACE_BOUND('',#425995,.F.); +#425995 = EDGE_LOOP('',(#425996,#426006,#426013,#426014)); +#425996 = ORIENTED_EDGE('',*,*,#425997,.T.); +#425997 = EDGE_CURVE('',#425998,#426000,#426002,.T.); +#425998 = VERTEX_POINT('',#425999); +#425999 = CARTESIAN_POINT('',(147.5,-96.65,-3.5E-02)); +#426000 = VERTEX_POINT('',#426001); +#426001 = CARTESIAN_POINT('',(147.5,-96.65,1.545)); +#426002 = LINE('',#426003,#426004); +#426003 = CARTESIAN_POINT('',(147.5,-96.65,-3.5E-02)); +#426004 = VECTOR('',#426005,1.); +#426005 = DIRECTION('',(0.,0.,1.)); +#426006 = ORIENTED_EDGE('',*,*,#426007,.T.); +#426007 = EDGE_CURVE('',#426000,#426000,#426008,.T.); +#426008 = CIRCLE('',#426009,0.15); +#426009 = AXIS2_PLACEMENT_3D('',#426010,#426011,#426012); +#426010 = CARTESIAN_POINT('',(147.5,-96.5,1.545)); +#426011 = DIRECTION('',(0.,0.,1.)); +#426012 = DIRECTION('',(-0.,-1.,0.)); +#426013 = ORIENTED_EDGE('',*,*,#425997,.F.); +#426014 = ORIENTED_EDGE('',*,*,#426015,.F.); +#426015 = EDGE_CURVE('',#425998,#425998,#426016,.T.); +#426016 = CIRCLE('',#426017,0.15); +#426017 = AXIS2_PLACEMENT_3D('',#426018,#426019,#426020); +#426018 = CARTESIAN_POINT('',(147.5,-96.5,-3.5E-02)); +#426019 = DIRECTION('',(0.,0.,1.)); +#426020 = DIRECTION('',(-0.,-1.,0.)); +#426021 = CYLINDRICAL_SURFACE('',#426022,0.15); +#426022 = AXIS2_PLACEMENT_3D('',#426023,#426024,#426025); +#426023 = CARTESIAN_POINT('',(147.5,-96.5,-3.5E-02)); +#426024 = DIRECTION('',(-0.,-0.,-1.)); +#426025 = DIRECTION('',(-0.,-1.,0.)); +#426026 = ADVANCED_FACE('',(#426027,#426030),#426041,.F.); +#426027 = FACE_BOUND('',#426028,.F.); +#426028 = EDGE_LOOP('',(#426029)); +#426029 = ORIENTED_EDGE('',*,*,#426015,.T.); +#426030 = FACE_BOUND('',#426031,.F.); +#426031 = EDGE_LOOP('',(#426032)); +#426032 = ORIENTED_EDGE('',*,*,#426033,.T.); +#426033 = EDGE_CURVE('',#426034,#426034,#426036,.T.); +#426034 = VERTEX_POINT('',#426035); +#426035 = CARTESIAN_POINT('',(147.5,-96.625,-3.5E-02)); +#426036 = CIRCLE('',#426037,0.125); +#426037 = AXIS2_PLACEMENT_3D('',#426038,#426039,#426040); +#426038 = CARTESIAN_POINT('',(147.5,-96.5,-3.5E-02)); +#426039 = DIRECTION('',(-0.,0.,-1.)); +#426040 = DIRECTION('',(-0.,-1.,0.)); +#426041 = PLANE('',#426042); +#426042 = AXIS2_PLACEMENT_3D('',#426043,#426044,#426045); +#426043 = CARTESIAN_POINT('',(147.5,-96.65,-3.5E-02)); +#426044 = DIRECTION('',(0.,0.,1.)); +#426045 = DIRECTION('',(1.,0.,-0.)); +#426046 = ADVANCED_FACE('',(#426047,#426050),#426061,.T.); +#426047 = FACE_BOUND('',#426048,.T.); +#426048 = EDGE_LOOP('',(#426049)); +#426049 = ORIENTED_EDGE('',*,*,#426007,.T.); +#426050 = FACE_BOUND('',#426051,.T.); +#426051 = EDGE_LOOP('',(#426052)); +#426052 = ORIENTED_EDGE('',*,*,#426053,.T.); +#426053 = EDGE_CURVE('',#426054,#426054,#426056,.T.); +#426054 = VERTEX_POINT('',#426055); +#426055 = CARTESIAN_POINT('',(147.5,-96.625,1.545)); +#426056 = CIRCLE('',#426057,0.125); +#426057 = AXIS2_PLACEMENT_3D('',#426058,#426059,#426060); +#426058 = CARTESIAN_POINT('',(147.5,-96.5,1.545)); +#426059 = DIRECTION('',(-0.,0.,-1.)); +#426060 = DIRECTION('',(-0.,-1.,0.)); +#426061 = PLANE('',#426062); +#426062 = AXIS2_PLACEMENT_3D('',#426063,#426064,#426065); +#426063 = CARTESIAN_POINT('',(147.5,-96.65,1.545)); +#426064 = DIRECTION('',(0.,0.,1.)); +#426065 = DIRECTION('',(1.,0.,-0.)); +#426066 = ADVANCED_FACE('',(#426067),#426078,.F.); +#426067 = FACE_BOUND('',#426068,.T.); +#426068 = EDGE_LOOP('',(#426069,#426070,#426076,#426077)); +#426069 = ORIENTED_EDGE('',*,*,#426033,.T.); +#426070 = ORIENTED_EDGE('',*,*,#426071,.T.); +#426071 = EDGE_CURVE('',#426034,#426054,#426072,.T.); +#426072 = LINE('',#426073,#426074); +#426073 = CARTESIAN_POINT('',(147.5,-96.625,-3.6E-02)); +#426074 = VECTOR('',#426075,1.); +#426075 = DIRECTION('',(0.,0.,1.)); +#426076 = ORIENTED_EDGE('',*,*,#426053,.F.); +#426077 = ORIENTED_EDGE('',*,*,#426071,.F.); +#426078 = CYLINDRICAL_SURFACE('',#426079,0.125); +#426079 = AXIS2_PLACEMENT_3D('',#426080,#426081,#426082); +#426080 = CARTESIAN_POINT('',(147.5,-96.5,-3.6E-02)); +#426081 = DIRECTION('',(-0.,-0.,-1.)); +#426082 = DIRECTION('',(-0.,-1.,0.)); +#426083 = MANIFOLD_SOLID_BREP('',#426084); +#426084 = CLOSED_SHELL('',(#426085,#426118,#426138,#426158)); +#426085 = ADVANCED_FACE('',(#426086),#426113,.T.); +#426086 = FACE_BOUND('',#426087,.F.); +#426087 = EDGE_LOOP('',(#426088,#426098,#426105,#426106)); +#426088 = ORIENTED_EDGE('',*,*,#426089,.T.); +#426089 = EDGE_CURVE('',#426090,#426092,#426094,.T.); +#426090 = VERTEX_POINT('',#426091); +#426091 = CARTESIAN_POINT('',(126.,-153.15,-3.5E-02)); +#426092 = VERTEX_POINT('',#426093); +#426093 = CARTESIAN_POINT('',(126.,-153.15,1.545)); +#426094 = LINE('',#426095,#426096); +#426095 = CARTESIAN_POINT('',(126.,-153.15,-3.5E-02)); +#426096 = VECTOR('',#426097,1.); +#426097 = DIRECTION('',(0.,0.,1.)); +#426098 = ORIENTED_EDGE('',*,*,#426099,.T.); +#426099 = EDGE_CURVE('',#426092,#426092,#426100,.T.); +#426100 = CIRCLE('',#426101,0.15); +#426101 = AXIS2_PLACEMENT_3D('',#426102,#426103,#426104); +#426102 = CARTESIAN_POINT('',(126.,-153.,1.545)); +#426103 = DIRECTION('',(0.,0.,1.)); +#426104 = DIRECTION('',(-0.,-1.,0.)); +#426105 = ORIENTED_EDGE('',*,*,#426089,.F.); +#426106 = ORIENTED_EDGE('',*,*,#426107,.F.); +#426107 = EDGE_CURVE('',#426090,#426090,#426108,.T.); +#426108 = CIRCLE('',#426109,0.15); +#426109 = AXIS2_PLACEMENT_3D('',#426110,#426111,#426112); +#426110 = CARTESIAN_POINT('',(126.,-153.,-3.5E-02)); +#426111 = DIRECTION('',(0.,0.,1.)); +#426112 = DIRECTION('',(-0.,-1.,0.)); +#426113 = CYLINDRICAL_SURFACE('',#426114,0.15); +#426114 = AXIS2_PLACEMENT_3D('',#426115,#426116,#426117); +#426115 = CARTESIAN_POINT('',(126.,-153.,-3.5E-02)); +#426116 = DIRECTION('',(-0.,-0.,-1.)); +#426117 = DIRECTION('',(-0.,-1.,0.)); +#426118 = ADVANCED_FACE('',(#426119,#426122),#426133,.F.); +#426119 = FACE_BOUND('',#426120,.F.); +#426120 = EDGE_LOOP('',(#426121)); +#426121 = ORIENTED_EDGE('',*,*,#426107,.T.); +#426122 = FACE_BOUND('',#426123,.F.); +#426123 = EDGE_LOOP('',(#426124)); +#426124 = ORIENTED_EDGE('',*,*,#426125,.T.); +#426125 = EDGE_CURVE('',#426126,#426126,#426128,.T.); +#426126 = VERTEX_POINT('',#426127); +#426127 = CARTESIAN_POINT('',(126.,-153.125,-3.5E-02)); +#426128 = CIRCLE('',#426129,0.125); +#426129 = AXIS2_PLACEMENT_3D('',#426130,#426131,#426132); +#426130 = CARTESIAN_POINT('',(126.,-153.,-3.5E-02)); +#426131 = DIRECTION('',(-0.,0.,-1.)); +#426132 = DIRECTION('',(-0.,-1.,0.)); +#426133 = PLANE('',#426134); +#426134 = AXIS2_PLACEMENT_3D('',#426135,#426136,#426137); +#426135 = CARTESIAN_POINT('',(126.,-153.15,-3.5E-02)); +#426136 = DIRECTION('',(0.,0.,1.)); +#426137 = DIRECTION('',(1.,0.,-0.)); +#426138 = ADVANCED_FACE('',(#426139,#426142),#426153,.T.); +#426139 = FACE_BOUND('',#426140,.T.); +#426140 = EDGE_LOOP('',(#426141)); +#426141 = ORIENTED_EDGE('',*,*,#426099,.T.); +#426142 = FACE_BOUND('',#426143,.T.); +#426143 = EDGE_LOOP('',(#426144)); +#426144 = ORIENTED_EDGE('',*,*,#426145,.T.); +#426145 = EDGE_CURVE('',#426146,#426146,#426148,.T.); +#426146 = VERTEX_POINT('',#426147); +#426147 = CARTESIAN_POINT('',(126.,-153.125,1.545)); +#426148 = CIRCLE('',#426149,0.125); +#426149 = AXIS2_PLACEMENT_3D('',#426150,#426151,#426152); +#426150 = CARTESIAN_POINT('',(126.,-153.,1.545)); +#426151 = DIRECTION('',(-0.,0.,-1.)); +#426152 = DIRECTION('',(-0.,-1.,0.)); +#426153 = PLANE('',#426154); +#426154 = AXIS2_PLACEMENT_3D('',#426155,#426156,#426157); +#426155 = CARTESIAN_POINT('',(126.,-153.15,1.545)); +#426156 = DIRECTION('',(0.,0.,1.)); +#426157 = DIRECTION('',(1.,0.,-0.)); +#426158 = ADVANCED_FACE('',(#426159),#426170,.F.); +#426159 = FACE_BOUND('',#426160,.T.); +#426160 = EDGE_LOOP('',(#426161,#426162,#426168,#426169)); +#426161 = ORIENTED_EDGE('',*,*,#426125,.T.); +#426162 = ORIENTED_EDGE('',*,*,#426163,.T.); +#426163 = EDGE_CURVE('',#426126,#426146,#426164,.T.); +#426164 = LINE('',#426165,#426166); +#426165 = CARTESIAN_POINT('',(126.,-153.125,-3.6E-02)); +#426166 = VECTOR('',#426167,1.); +#426167 = DIRECTION('',(0.,0.,1.)); +#426168 = ORIENTED_EDGE('',*,*,#426145,.F.); +#426169 = ORIENTED_EDGE('',*,*,#426163,.F.); +#426170 = CYLINDRICAL_SURFACE('',#426171,0.125); +#426171 = AXIS2_PLACEMENT_3D('',#426172,#426173,#426174); +#426172 = CARTESIAN_POINT('',(126.,-153.,-3.6E-02)); +#426173 = DIRECTION('',(-0.,-0.,-1.)); +#426174 = DIRECTION('',(-0.,-1.,0.)); +#426175 = MANIFOLD_SOLID_BREP('',#426176); +#426176 = CLOSED_SHELL('',(#426177,#426210,#426230,#426250)); +#426177 = ADVANCED_FACE('',(#426178),#426205,.T.); +#426178 = FACE_BOUND('',#426179,.F.); +#426179 = EDGE_LOOP('',(#426180,#426190,#426197,#426198)); +#426180 = ORIENTED_EDGE('',*,*,#426181,.T.); +#426181 = EDGE_CURVE('',#426182,#426184,#426186,.T.); +#426182 = VERTEX_POINT('',#426183); +#426183 = CARTESIAN_POINT('',(125.,-118.15,-3.5E-02)); +#426184 = VERTEX_POINT('',#426185); +#426185 = CARTESIAN_POINT('',(125.,-118.15,1.545)); +#426186 = LINE('',#426187,#426188); +#426187 = CARTESIAN_POINT('',(125.,-118.15,-3.5E-02)); +#426188 = VECTOR('',#426189,1.); +#426189 = DIRECTION('',(0.,0.,1.)); +#426190 = ORIENTED_EDGE('',*,*,#426191,.T.); +#426191 = EDGE_CURVE('',#426184,#426184,#426192,.T.); +#426192 = CIRCLE('',#426193,0.15); +#426193 = AXIS2_PLACEMENT_3D('',#426194,#426195,#426196); +#426194 = CARTESIAN_POINT('',(125.,-118.,1.545)); +#426195 = DIRECTION('',(0.,0.,1.)); +#426196 = DIRECTION('',(-0.,-1.,0.)); +#426197 = ORIENTED_EDGE('',*,*,#426181,.F.); +#426198 = ORIENTED_EDGE('',*,*,#426199,.F.); +#426199 = EDGE_CURVE('',#426182,#426182,#426200,.T.); +#426200 = CIRCLE('',#426201,0.15); +#426201 = AXIS2_PLACEMENT_3D('',#426202,#426203,#426204); +#426202 = CARTESIAN_POINT('',(125.,-118.,-3.5E-02)); +#426203 = DIRECTION('',(0.,0.,1.)); +#426204 = DIRECTION('',(-0.,-1.,0.)); +#426205 = CYLINDRICAL_SURFACE('',#426206,0.15); +#426206 = AXIS2_PLACEMENT_3D('',#426207,#426208,#426209); +#426207 = CARTESIAN_POINT('',(125.,-118.,-3.5E-02)); +#426208 = DIRECTION('',(-0.,-0.,-1.)); +#426209 = DIRECTION('',(-0.,-1.,0.)); +#426210 = ADVANCED_FACE('',(#426211,#426214),#426225,.F.); +#426211 = FACE_BOUND('',#426212,.F.); +#426212 = EDGE_LOOP('',(#426213)); +#426213 = ORIENTED_EDGE('',*,*,#426199,.T.); +#426214 = FACE_BOUND('',#426215,.F.); +#426215 = EDGE_LOOP('',(#426216)); +#426216 = ORIENTED_EDGE('',*,*,#426217,.T.); +#426217 = EDGE_CURVE('',#426218,#426218,#426220,.T.); +#426218 = VERTEX_POINT('',#426219); +#426219 = CARTESIAN_POINT('',(125.,-118.125,-3.5E-02)); +#426220 = CIRCLE('',#426221,0.125); +#426221 = AXIS2_PLACEMENT_3D('',#426222,#426223,#426224); +#426222 = CARTESIAN_POINT('',(125.,-118.,-3.5E-02)); +#426223 = DIRECTION('',(-0.,0.,-1.)); +#426224 = DIRECTION('',(-0.,-1.,0.)); +#426225 = PLANE('',#426226); +#426226 = AXIS2_PLACEMENT_3D('',#426227,#426228,#426229); +#426227 = CARTESIAN_POINT('',(125.,-118.15,-3.5E-02)); +#426228 = DIRECTION('',(0.,0.,1.)); +#426229 = DIRECTION('',(1.,0.,-0.)); +#426230 = ADVANCED_FACE('',(#426231,#426234),#426245,.T.); +#426231 = FACE_BOUND('',#426232,.T.); +#426232 = EDGE_LOOP('',(#426233)); +#426233 = ORIENTED_EDGE('',*,*,#426191,.T.); +#426234 = FACE_BOUND('',#426235,.T.); +#426235 = EDGE_LOOP('',(#426236)); +#426236 = ORIENTED_EDGE('',*,*,#426237,.T.); +#426237 = EDGE_CURVE('',#426238,#426238,#426240,.T.); +#426238 = VERTEX_POINT('',#426239); +#426239 = CARTESIAN_POINT('',(125.,-118.125,1.545)); +#426240 = CIRCLE('',#426241,0.125); +#426241 = AXIS2_PLACEMENT_3D('',#426242,#426243,#426244); +#426242 = CARTESIAN_POINT('',(125.,-118.,1.545)); +#426243 = DIRECTION('',(-0.,0.,-1.)); +#426244 = DIRECTION('',(-0.,-1.,0.)); +#426245 = PLANE('',#426246); +#426246 = AXIS2_PLACEMENT_3D('',#426247,#426248,#426249); +#426247 = CARTESIAN_POINT('',(125.,-118.15,1.545)); +#426248 = DIRECTION('',(0.,0.,1.)); +#426249 = DIRECTION('',(1.,0.,-0.)); +#426250 = ADVANCED_FACE('',(#426251),#426262,.F.); +#426251 = FACE_BOUND('',#426252,.T.); +#426252 = EDGE_LOOP('',(#426253,#426254,#426260,#426261)); +#426253 = ORIENTED_EDGE('',*,*,#426217,.T.); +#426254 = ORIENTED_EDGE('',*,*,#426255,.T.); +#426255 = EDGE_CURVE('',#426218,#426238,#426256,.T.); +#426256 = LINE('',#426257,#426258); +#426257 = CARTESIAN_POINT('',(125.,-118.125,-3.6E-02)); +#426258 = VECTOR('',#426259,1.); +#426259 = DIRECTION('',(0.,0.,1.)); +#426260 = ORIENTED_EDGE('',*,*,#426237,.F.); +#426261 = ORIENTED_EDGE('',*,*,#426255,.F.); +#426262 = CYLINDRICAL_SURFACE('',#426263,0.125); +#426263 = AXIS2_PLACEMENT_3D('',#426264,#426265,#426266); +#426264 = CARTESIAN_POINT('',(125.,-118.,-3.6E-02)); +#426265 = DIRECTION('',(-0.,-0.,-1.)); +#426266 = DIRECTION('',(-0.,-1.,0.)); +#426267 = MANIFOLD_SOLID_BREP('',#426268); +#426268 = CLOSED_SHELL('',(#426269,#426302,#426322,#426342)); +#426269 = ADVANCED_FACE('',(#426270),#426297,.T.); +#426270 = FACE_BOUND('',#426271,.F.); +#426271 = EDGE_LOOP('',(#426272,#426282,#426289,#426290)); +#426272 = ORIENTED_EDGE('',*,*,#426273,.T.); +#426273 = EDGE_CURVE('',#426274,#426276,#426278,.T.); +#426274 = VERTEX_POINT('',#426275); +#426275 = CARTESIAN_POINT('',(130.8,-64.85,-3.5E-02)); +#426276 = VERTEX_POINT('',#426277); +#426277 = CARTESIAN_POINT('',(130.8,-64.85,1.545)); +#426278 = LINE('',#426279,#426280); +#426279 = CARTESIAN_POINT('',(130.8,-64.85,-3.5E-02)); +#426280 = VECTOR('',#426281,1.); +#426281 = DIRECTION('',(0.,0.,1.)); +#426282 = ORIENTED_EDGE('',*,*,#426283,.T.); +#426283 = EDGE_CURVE('',#426276,#426276,#426284,.T.); +#426284 = CIRCLE('',#426285,0.15); +#426285 = AXIS2_PLACEMENT_3D('',#426286,#426287,#426288); +#426286 = CARTESIAN_POINT('',(130.8,-64.7,1.545)); +#426287 = DIRECTION('',(0.,0.,1.)); +#426288 = DIRECTION('',(-0.,-1.,0.)); +#426289 = ORIENTED_EDGE('',*,*,#426273,.F.); +#426290 = ORIENTED_EDGE('',*,*,#426291,.F.); +#426291 = EDGE_CURVE('',#426274,#426274,#426292,.T.); +#426292 = CIRCLE('',#426293,0.15); +#426293 = AXIS2_PLACEMENT_3D('',#426294,#426295,#426296); +#426294 = CARTESIAN_POINT('',(130.8,-64.7,-3.5E-02)); +#426295 = DIRECTION('',(0.,0.,1.)); +#426296 = DIRECTION('',(-0.,-1.,0.)); +#426297 = CYLINDRICAL_SURFACE('',#426298,0.15); +#426298 = AXIS2_PLACEMENT_3D('',#426299,#426300,#426301); +#426299 = CARTESIAN_POINT('',(130.8,-64.7,-3.5E-02)); +#426300 = DIRECTION('',(-0.,-0.,-1.)); +#426301 = DIRECTION('',(-0.,-1.,0.)); +#426302 = ADVANCED_FACE('',(#426303,#426306),#426317,.F.); +#426303 = FACE_BOUND('',#426304,.F.); +#426304 = EDGE_LOOP('',(#426305)); +#426305 = ORIENTED_EDGE('',*,*,#426291,.T.); +#426306 = FACE_BOUND('',#426307,.F.); +#426307 = EDGE_LOOP('',(#426308)); +#426308 = ORIENTED_EDGE('',*,*,#426309,.T.); +#426309 = EDGE_CURVE('',#426310,#426310,#426312,.T.); +#426310 = VERTEX_POINT('',#426311); +#426311 = CARTESIAN_POINT('',(130.8,-64.825,-3.5E-02)); +#426312 = CIRCLE('',#426313,0.125); +#426313 = AXIS2_PLACEMENT_3D('',#426314,#426315,#426316); +#426314 = CARTESIAN_POINT('',(130.8,-64.7,-3.5E-02)); +#426315 = DIRECTION('',(-0.,0.,-1.)); +#426316 = DIRECTION('',(-0.,-1.,0.)); +#426317 = PLANE('',#426318); +#426318 = AXIS2_PLACEMENT_3D('',#426319,#426320,#426321); +#426319 = CARTESIAN_POINT('',(130.8,-64.85,-3.5E-02)); +#426320 = DIRECTION('',(0.,0.,1.)); +#426321 = DIRECTION('',(1.,0.,-0.)); +#426322 = ADVANCED_FACE('',(#426323,#426326),#426337,.T.); +#426323 = FACE_BOUND('',#426324,.T.); +#426324 = EDGE_LOOP('',(#426325)); +#426325 = ORIENTED_EDGE('',*,*,#426283,.T.); +#426326 = FACE_BOUND('',#426327,.T.); +#426327 = EDGE_LOOP('',(#426328)); +#426328 = ORIENTED_EDGE('',*,*,#426329,.T.); +#426329 = EDGE_CURVE('',#426330,#426330,#426332,.T.); +#426330 = VERTEX_POINT('',#426331); +#426331 = CARTESIAN_POINT('',(130.8,-64.825,1.545)); +#426332 = CIRCLE('',#426333,0.125); +#426333 = AXIS2_PLACEMENT_3D('',#426334,#426335,#426336); +#426334 = CARTESIAN_POINT('',(130.8,-64.7,1.545)); +#426335 = DIRECTION('',(-0.,0.,-1.)); +#426336 = DIRECTION('',(-0.,-1.,0.)); +#426337 = PLANE('',#426338); +#426338 = AXIS2_PLACEMENT_3D('',#426339,#426340,#426341); +#426339 = CARTESIAN_POINT('',(130.8,-64.85,1.545)); +#426340 = DIRECTION('',(0.,0.,1.)); +#426341 = DIRECTION('',(1.,0.,-0.)); +#426342 = ADVANCED_FACE('',(#426343),#426354,.F.); +#426343 = FACE_BOUND('',#426344,.T.); +#426344 = EDGE_LOOP('',(#426345,#426346,#426352,#426353)); +#426345 = ORIENTED_EDGE('',*,*,#426309,.T.); +#426346 = ORIENTED_EDGE('',*,*,#426347,.T.); +#426347 = EDGE_CURVE('',#426310,#426330,#426348,.T.); +#426348 = LINE('',#426349,#426350); +#426349 = CARTESIAN_POINT('',(130.8,-64.825,-3.6E-02)); +#426350 = VECTOR('',#426351,1.); +#426351 = DIRECTION('',(0.,0.,1.)); +#426352 = ORIENTED_EDGE('',*,*,#426329,.F.); +#426353 = ORIENTED_EDGE('',*,*,#426347,.F.); +#426354 = CYLINDRICAL_SURFACE('',#426355,0.125); +#426355 = AXIS2_PLACEMENT_3D('',#426356,#426357,#426358); +#426356 = CARTESIAN_POINT('',(130.8,-64.7,-3.6E-02)); +#426357 = DIRECTION('',(-0.,-0.,-1.)); +#426358 = DIRECTION('',(-0.,-1.,0.)); +#426359 = MANIFOLD_SOLID_BREP('',#426360); +#426360 = CLOSED_SHELL('',(#426361,#426394,#426414,#426434)); +#426361 = ADVANCED_FACE('',(#426362),#426389,.T.); +#426362 = FACE_BOUND('',#426363,.F.); +#426363 = EDGE_LOOP('',(#426364,#426374,#426381,#426382)); +#426364 = ORIENTED_EDGE('',*,*,#426365,.T.); +#426365 = EDGE_CURVE('',#426366,#426368,#426370,.T.); +#426366 = VERTEX_POINT('',#426367); +#426367 = CARTESIAN_POINT('',(121.5,-112.15,-3.5E-02)); +#426368 = VERTEX_POINT('',#426369); +#426369 = CARTESIAN_POINT('',(121.5,-112.15,1.545)); +#426370 = LINE('',#426371,#426372); +#426371 = CARTESIAN_POINT('',(121.5,-112.15,-3.5E-02)); +#426372 = VECTOR('',#426373,1.); +#426373 = DIRECTION('',(0.,0.,1.)); +#426374 = ORIENTED_EDGE('',*,*,#426375,.T.); +#426375 = EDGE_CURVE('',#426368,#426368,#426376,.T.); +#426376 = CIRCLE('',#426377,0.15); +#426377 = AXIS2_PLACEMENT_3D('',#426378,#426379,#426380); +#426378 = CARTESIAN_POINT('',(121.5,-112.,1.545)); +#426379 = DIRECTION('',(0.,0.,1.)); +#426380 = DIRECTION('',(-0.,-1.,0.)); +#426381 = ORIENTED_EDGE('',*,*,#426365,.F.); +#426382 = ORIENTED_EDGE('',*,*,#426383,.F.); +#426383 = EDGE_CURVE('',#426366,#426366,#426384,.T.); +#426384 = CIRCLE('',#426385,0.15); +#426385 = AXIS2_PLACEMENT_3D('',#426386,#426387,#426388); +#426386 = CARTESIAN_POINT('',(121.5,-112.,-3.5E-02)); +#426387 = DIRECTION('',(0.,0.,1.)); +#426388 = DIRECTION('',(-0.,-1.,0.)); +#426389 = CYLINDRICAL_SURFACE('',#426390,0.15); +#426390 = AXIS2_PLACEMENT_3D('',#426391,#426392,#426393); +#426391 = CARTESIAN_POINT('',(121.5,-112.,-3.5E-02)); +#426392 = DIRECTION('',(-0.,-0.,-1.)); +#426393 = DIRECTION('',(-0.,-1.,0.)); +#426394 = ADVANCED_FACE('',(#426395,#426398),#426409,.F.); +#426395 = FACE_BOUND('',#426396,.F.); +#426396 = EDGE_LOOP('',(#426397)); +#426397 = ORIENTED_EDGE('',*,*,#426383,.T.); +#426398 = FACE_BOUND('',#426399,.F.); +#426399 = EDGE_LOOP('',(#426400)); +#426400 = ORIENTED_EDGE('',*,*,#426401,.T.); +#426401 = EDGE_CURVE('',#426402,#426402,#426404,.T.); +#426402 = VERTEX_POINT('',#426403); +#426403 = CARTESIAN_POINT('',(121.5,-112.125,-3.5E-02)); +#426404 = CIRCLE('',#426405,0.125); +#426405 = AXIS2_PLACEMENT_3D('',#426406,#426407,#426408); +#426406 = CARTESIAN_POINT('',(121.5,-112.,-3.5E-02)); +#426407 = DIRECTION('',(-0.,0.,-1.)); +#426408 = DIRECTION('',(-0.,-1.,0.)); +#426409 = PLANE('',#426410); +#426410 = AXIS2_PLACEMENT_3D('',#426411,#426412,#426413); +#426411 = CARTESIAN_POINT('',(121.5,-112.15,-3.5E-02)); +#426412 = DIRECTION('',(0.,0.,1.)); +#426413 = DIRECTION('',(1.,0.,-0.)); +#426414 = ADVANCED_FACE('',(#426415,#426418),#426429,.T.); +#426415 = FACE_BOUND('',#426416,.T.); +#426416 = EDGE_LOOP('',(#426417)); +#426417 = ORIENTED_EDGE('',*,*,#426375,.T.); +#426418 = FACE_BOUND('',#426419,.T.); +#426419 = EDGE_LOOP('',(#426420)); +#426420 = ORIENTED_EDGE('',*,*,#426421,.T.); +#426421 = EDGE_CURVE('',#426422,#426422,#426424,.T.); +#426422 = VERTEX_POINT('',#426423); +#426423 = CARTESIAN_POINT('',(121.5,-112.125,1.545)); +#426424 = CIRCLE('',#426425,0.125); +#426425 = AXIS2_PLACEMENT_3D('',#426426,#426427,#426428); +#426426 = CARTESIAN_POINT('',(121.5,-112.,1.545)); +#426427 = DIRECTION('',(-0.,0.,-1.)); +#426428 = DIRECTION('',(-0.,-1.,0.)); +#426429 = PLANE('',#426430); +#426430 = AXIS2_PLACEMENT_3D('',#426431,#426432,#426433); +#426431 = CARTESIAN_POINT('',(121.5,-112.15,1.545)); +#426432 = DIRECTION('',(0.,0.,1.)); +#426433 = DIRECTION('',(1.,0.,-0.)); +#426434 = ADVANCED_FACE('',(#426435),#426446,.F.); +#426435 = FACE_BOUND('',#426436,.T.); +#426436 = EDGE_LOOP('',(#426437,#426438,#426444,#426445)); +#426437 = ORIENTED_EDGE('',*,*,#426401,.T.); +#426438 = ORIENTED_EDGE('',*,*,#426439,.T.); +#426439 = EDGE_CURVE('',#426402,#426422,#426440,.T.); +#426440 = LINE('',#426441,#426442); +#426441 = CARTESIAN_POINT('',(121.5,-112.125,-3.6E-02)); +#426442 = VECTOR('',#426443,1.); +#426443 = DIRECTION('',(0.,0.,1.)); +#426444 = ORIENTED_EDGE('',*,*,#426421,.F.); +#426445 = ORIENTED_EDGE('',*,*,#426439,.F.); +#426446 = CYLINDRICAL_SURFACE('',#426447,0.125); +#426447 = AXIS2_PLACEMENT_3D('',#426448,#426449,#426450); +#426448 = CARTESIAN_POINT('',(121.5,-112.,-3.6E-02)); +#426449 = DIRECTION('',(-0.,-0.,-1.)); +#426450 = DIRECTION('',(-0.,-1.,0.)); +#426451 = MANIFOLD_SOLID_BREP('',#426452); +#426452 = CLOSED_SHELL('',(#426453,#426486,#426506,#426526)); +#426453 = ADVANCED_FACE('',(#426454),#426481,.T.); +#426454 = FACE_BOUND('',#426455,.F.); +#426455 = EDGE_LOOP('',(#426456,#426466,#426473,#426474)); +#426456 = ORIENTED_EDGE('',*,*,#426457,.T.); +#426457 = EDGE_CURVE('',#426458,#426460,#426462,.T.); +#426458 = VERTEX_POINT('',#426459); +#426459 = CARTESIAN_POINT('',(124.,-129.15,-3.5E-02)); +#426460 = VERTEX_POINT('',#426461); +#426461 = CARTESIAN_POINT('',(124.,-129.15,1.545)); +#426462 = LINE('',#426463,#426464); +#426463 = CARTESIAN_POINT('',(124.,-129.15,-3.5E-02)); +#426464 = VECTOR('',#426465,1.); +#426465 = DIRECTION('',(0.,0.,1.)); +#426466 = ORIENTED_EDGE('',*,*,#426467,.T.); +#426467 = EDGE_CURVE('',#426460,#426460,#426468,.T.); +#426468 = CIRCLE('',#426469,0.15); +#426469 = AXIS2_PLACEMENT_3D('',#426470,#426471,#426472); +#426470 = CARTESIAN_POINT('',(124.,-129.,1.545)); +#426471 = DIRECTION('',(0.,0.,1.)); +#426472 = DIRECTION('',(-0.,-1.,0.)); +#426473 = ORIENTED_EDGE('',*,*,#426457,.F.); +#426474 = ORIENTED_EDGE('',*,*,#426475,.F.); +#426475 = EDGE_CURVE('',#426458,#426458,#426476,.T.); +#426476 = CIRCLE('',#426477,0.15); +#426477 = AXIS2_PLACEMENT_3D('',#426478,#426479,#426480); +#426478 = CARTESIAN_POINT('',(124.,-129.,-3.5E-02)); +#426479 = DIRECTION('',(0.,0.,1.)); +#426480 = DIRECTION('',(-0.,-1.,0.)); +#426481 = CYLINDRICAL_SURFACE('',#426482,0.15); +#426482 = AXIS2_PLACEMENT_3D('',#426483,#426484,#426485); +#426483 = CARTESIAN_POINT('',(124.,-129.,-3.5E-02)); +#426484 = DIRECTION('',(-0.,-0.,-1.)); +#426485 = DIRECTION('',(-0.,-1.,0.)); +#426486 = ADVANCED_FACE('',(#426487,#426490),#426501,.F.); +#426487 = FACE_BOUND('',#426488,.F.); +#426488 = EDGE_LOOP('',(#426489)); +#426489 = ORIENTED_EDGE('',*,*,#426475,.T.); +#426490 = FACE_BOUND('',#426491,.F.); +#426491 = EDGE_LOOP('',(#426492)); +#426492 = ORIENTED_EDGE('',*,*,#426493,.T.); +#426493 = EDGE_CURVE('',#426494,#426494,#426496,.T.); +#426494 = VERTEX_POINT('',#426495); +#426495 = CARTESIAN_POINT('',(124.,-129.125,-3.5E-02)); +#426496 = CIRCLE('',#426497,0.125); +#426497 = AXIS2_PLACEMENT_3D('',#426498,#426499,#426500); +#426498 = CARTESIAN_POINT('',(124.,-129.,-3.5E-02)); +#426499 = DIRECTION('',(-0.,0.,-1.)); +#426500 = DIRECTION('',(-0.,-1.,0.)); +#426501 = PLANE('',#426502); +#426502 = AXIS2_PLACEMENT_3D('',#426503,#426504,#426505); +#426503 = CARTESIAN_POINT('',(124.,-129.15,-3.5E-02)); +#426504 = DIRECTION('',(0.,0.,1.)); +#426505 = DIRECTION('',(1.,0.,-0.)); +#426506 = ADVANCED_FACE('',(#426507,#426510),#426521,.T.); +#426507 = FACE_BOUND('',#426508,.T.); +#426508 = EDGE_LOOP('',(#426509)); +#426509 = ORIENTED_EDGE('',*,*,#426467,.T.); +#426510 = FACE_BOUND('',#426511,.T.); +#426511 = EDGE_LOOP('',(#426512)); +#426512 = ORIENTED_EDGE('',*,*,#426513,.T.); +#426513 = EDGE_CURVE('',#426514,#426514,#426516,.T.); +#426514 = VERTEX_POINT('',#426515); +#426515 = CARTESIAN_POINT('',(124.,-129.125,1.545)); +#426516 = CIRCLE('',#426517,0.125); +#426517 = AXIS2_PLACEMENT_3D('',#426518,#426519,#426520); +#426518 = CARTESIAN_POINT('',(124.,-129.,1.545)); +#426519 = DIRECTION('',(-0.,0.,-1.)); +#426520 = DIRECTION('',(-0.,-1.,0.)); +#426521 = PLANE('',#426522); +#426522 = AXIS2_PLACEMENT_3D('',#426523,#426524,#426525); +#426523 = CARTESIAN_POINT('',(124.,-129.15,1.545)); +#426524 = DIRECTION('',(0.,0.,1.)); +#426525 = DIRECTION('',(1.,0.,-0.)); +#426526 = ADVANCED_FACE('',(#426527),#426538,.F.); +#426527 = FACE_BOUND('',#426528,.T.); +#426528 = EDGE_LOOP('',(#426529,#426530,#426536,#426537)); +#426529 = ORIENTED_EDGE('',*,*,#426493,.T.); +#426530 = ORIENTED_EDGE('',*,*,#426531,.T.); +#426531 = EDGE_CURVE('',#426494,#426514,#426532,.T.); +#426532 = LINE('',#426533,#426534); +#426533 = CARTESIAN_POINT('',(124.,-129.125,-3.6E-02)); +#426534 = VECTOR('',#426535,1.); +#426535 = DIRECTION('',(0.,0.,1.)); +#426536 = ORIENTED_EDGE('',*,*,#426513,.F.); +#426537 = ORIENTED_EDGE('',*,*,#426531,.F.); +#426538 = CYLINDRICAL_SURFACE('',#426539,0.125); +#426539 = AXIS2_PLACEMENT_3D('',#426540,#426541,#426542); +#426540 = CARTESIAN_POINT('',(124.,-129.,-3.6E-02)); +#426541 = DIRECTION('',(-0.,-0.,-1.)); +#426542 = DIRECTION('',(-0.,-1.,0.)); +#426543 = MANIFOLD_SOLID_BREP('',#426544); +#426544 = CLOSED_SHELL('',(#426545,#426578,#426598,#426618)); +#426545 = ADVANCED_FACE('',(#426546),#426573,.T.); +#426546 = FACE_BOUND('',#426547,.F.); +#426547 = EDGE_LOOP('',(#426548,#426558,#426565,#426566)); +#426548 = ORIENTED_EDGE('',*,*,#426549,.T.); +#426549 = EDGE_CURVE('',#426550,#426552,#426554,.T.); +#426550 = VERTEX_POINT('',#426551); +#426551 = CARTESIAN_POINT('',(128.75,-121.4,-3.5E-02)); +#426552 = VERTEX_POINT('',#426553); +#426553 = CARTESIAN_POINT('',(128.75,-121.4,1.545)); +#426554 = LINE('',#426555,#426556); +#426555 = CARTESIAN_POINT('',(128.75,-121.4,-3.5E-02)); +#426556 = VECTOR('',#426557,1.); +#426557 = DIRECTION('',(0.,0.,1.)); +#426558 = ORIENTED_EDGE('',*,*,#426559,.T.); +#426559 = EDGE_CURVE('',#426552,#426552,#426560,.T.); +#426560 = CIRCLE('',#426561,0.15); +#426561 = AXIS2_PLACEMENT_3D('',#426562,#426563,#426564); +#426562 = CARTESIAN_POINT('',(128.75,-121.25,1.545)); +#426563 = DIRECTION('',(0.,0.,1.)); +#426564 = DIRECTION('',(-0.,-1.,0.)); +#426565 = ORIENTED_EDGE('',*,*,#426549,.F.); +#426566 = ORIENTED_EDGE('',*,*,#426567,.F.); +#426567 = EDGE_CURVE('',#426550,#426550,#426568,.T.); +#426568 = CIRCLE('',#426569,0.15); +#426569 = AXIS2_PLACEMENT_3D('',#426570,#426571,#426572); +#426570 = CARTESIAN_POINT('',(128.75,-121.25,-3.5E-02)); +#426571 = DIRECTION('',(0.,0.,1.)); +#426572 = DIRECTION('',(-0.,-1.,0.)); +#426573 = CYLINDRICAL_SURFACE('',#426574,0.15); +#426574 = AXIS2_PLACEMENT_3D('',#426575,#426576,#426577); +#426575 = CARTESIAN_POINT('',(128.75,-121.25,-3.5E-02)); +#426576 = DIRECTION('',(-0.,-0.,-1.)); +#426577 = DIRECTION('',(-0.,-1.,0.)); +#426578 = ADVANCED_FACE('',(#426579,#426582),#426593,.F.); +#426579 = FACE_BOUND('',#426580,.F.); +#426580 = EDGE_LOOP('',(#426581)); +#426581 = ORIENTED_EDGE('',*,*,#426567,.T.); +#426582 = FACE_BOUND('',#426583,.F.); +#426583 = EDGE_LOOP('',(#426584)); +#426584 = ORIENTED_EDGE('',*,*,#426585,.T.); +#426585 = EDGE_CURVE('',#426586,#426586,#426588,.T.); +#426586 = VERTEX_POINT('',#426587); +#426587 = CARTESIAN_POINT('',(128.75,-121.375,-3.5E-02)); +#426588 = CIRCLE('',#426589,0.125); +#426589 = AXIS2_PLACEMENT_3D('',#426590,#426591,#426592); +#426590 = CARTESIAN_POINT('',(128.75,-121.25,-3.5E-02)); +#426591 = DIRECTION('',(-0.,0.,-1.)); +#426592 = DIRECTION('',(-0.,-1.,0.)); +#426593 = PLANE('',#426594); +#426594 = AXIS2_PLACEMENT_3D('',#426595,#426596,#426597); +#426595 = CARTESIAN_POINT('',(128.75,-121.4,-3.5E-02)); +#426596 = DIRECTION('',(0.,0.,1.)); +#426597 = DIRECTION('',(1.,0.,-0.)); +#426598 = ADVANCED_FACE('',(#426599,#426602),#426613,.T.); +#426599 = FACE_BOUND('',#426600,.T.); +#426600 = EDGE_LOOP('',(#426601)); +#426601 = ORIENTED_EDGE('',*,*,#426559,.T.); +#426602 = FACE_BOUND('',#426603,.T.); +#426603 = EDGE_LOOP('',(#426604)); +#426604 = ORIENTED_EDGE('',*,*,#426605,.T.); +#426605 = EDGE_CURVE('',#426606,#426606,#426608,.T.); +#426606 = VERTEX_POINT('',#426607); +#426607 = CARTESIAN_POINT('',(128.75,-121.375,1.545)); +#426608 = CIRCLE('',#426609,0.125); +#426609 = AXIS2_PLACEMENT_3D('',#426610,#426611,#426612); +#426610 = CARTESIAN_POINT('',(128.75,-121.25,1.545)); +#426611 = DIRECTION('',(-0.,0.,-1.)); +#426612 = DIRECTION('',(-0.,-1.,0.)); +#426613 = PLANE('',#426614); +#426614 = AXIS2_PLACEMENT_3D('',#426615,#426616,#426617); +#426615 = CARTESIAN_POINT('',(128.75,-121.4,1.545)); +#426616 = DIRECTION('',(0.,0.,1.)); +#426617 = DIRECTION('',(1.,0.,-0.)); +#426618 = ADVANCED_FACE('',(#426619),#426630,.F.); +#426619 = FACE_BOUND('',#426620,.T.); +#426620 = EDGE_LOOP('',(#426621,#426622,#426628,#426629)); +#426621 = ORIENTED_EDGE('',*,*,#426585,.T.); +#426622 = ORIENTED_EDGE('',*,*,#426623,.T.); +#426623 = EDGE_CURVE('',#426586,#426606,#426624,.T.); +#426624 = LINE('',#426625,#426626); +#426625 = CARTESIAN_POINT('',(128.75,-121.375,-3.6E-02)); +#426626 = VECTOR('',#426627,1.); +#426627 = DIRECTION('',(0.,0.,1.)); +#426628 = ORIENTED_EDGE('',*,*,#426605,.F.); +#426629 = ORIENTED_EDGE('',*,*,#426623,.F.); +#426630 = CYLINDRICAL_SURFACE('',#426631,0.125); +#426631 = AXIS2_PLACEMENT_3D('',#426632,#426633,#426634); +#426632 = CARTESIAN_POINT('',(128.75,-121.25,-3.6E-02)); +#426633 = DIRECTION('',(-0.,-0.,-1.)); +#426634 = DIRECTION('',(-0.,-1.,0.)); +#426635 = MANIFOLD_SOLID_BREP('',#426636); +#426636 = CLOSED_SHELL('',(#426637,#426670,#426690,#426710)); +#426637 = ADVANCED_FACE('',(#426638),#426665,.T.); +#426638 = FACE_BOUND('',#426639,.F.); +#426639 = EDGE_LOOP('',(#426640,#426650,#426657,#426658)); +#426640 = ORIENTED_EDGE('',*,*,#426641,.T.); +#426641 = EDGE_CURVE('',#426642,#426644,#426646,.T.); +#426642 = VERTEX_POINT('',#426643); +#426643 = CARTESIAN_POINT('',(139.6,-79.55,-3.5E-02)); +#426644 = VERTEX_POINT('',#426645); +#426645 = CARTESIAN_POINT('',(139.6,-79.55,1.545)); +#426646 = LINE('',#426647,#426648); +#426647 = CARTESIAN_POINT('',(139.6,-79.55,-3.5E-02)); +#426648 = VECTOR('',#426649,1.); +#426649 = DIRECTION('',(0.,0.,1.)); +#426650 = ORIENTED_EDGE('',*,*,#426651,.T.); +#426651 = EDGE_CURVE('',#426644,#426644,#426652,.T.); +#426652 = CIRCLE('',#426653,0.15); +#426653 = AXIS2_PLACEMENT_3D('',#426654,#426655,#426656); +#426654 = CARTESIAN_POINT('',(139.6,-79.4,1.545)); +#426655 = DIRECTION('',(0.,0.,1.)); +#426656 = DIRECTION('',(-0.,-1.,0.)); +#426657 = ORIENTED_EDGE('',*,*,#426641,.F.); +#426658 = ORIENTED_EDGE('',*,*,#426659,.F.); +#426659 = EDGE_CURVE('',#426642,#426642,#426660,.T.); +#426660 = CIRCLE('',#426661,0.15); +#426661 = AXIS2_PLACEMENT_3D('',#426662,#426663,#426664); +#426662 = CARTESIAN_POINT('',(139.6,-79.4,-3.5E-02)); +#426663 = DIRECTION('',(0.,0.,1.)); +#426664 = DIRECTION('',(-0.,-1.,0.)); +#426665 = CYLINDRICAL_SURFACE('',#426666,0.15); +#426666 = AXIS2_PLACEMENT_3D('',#426667,#426668,#426669); +#426667 = CARTESIAN_POINT('',(139.6,-79.4,-3.5E-02)); +#426668 = DIRECTION('',(-0.,-0.,-1.)); +#426669 = DIRECTION('',(-0.,-1.,0.)); +#426670 = ADVANCED_FACE('',(#426671,#426674),#426685,.F.); +#426671 = FACE_BOUND('',#426672,.F.); +#426672 = EDGE_LOOP('',(#426673)); +#426673 = ORIENTED_EDGE('',*,*,#426659,.T.); +#426674 = FACE_BOUND('',#426675,.F.); +#426675 = EDGE_LOOP('',(#426676)); +#426676 = ORIENTED_EDGE('',*,*,#426677,.T.); +#426677 = EDGE_CURVE('',#426678,#426678,#426680,.T.); +#426678 = VERTEX_POINT('',#426679); +#426679 = CARTESIAN_POINT('',(139.6,-79.525,-3.5E-02)); +#426680 = CIRCLE('',#426681,0.125); +#426681 = AXIS2_PLACEMENT_3D('',#426682,#426683,#426684); +#426682 = CARTESIAN_POINT('',(139.6,-79.4,-3.5E-02)); +#426683 = DIRECTION('',(-0.,0.,-1.)); +#426684 = DIRECTION('',(-0.,-1.,0.)); +#426685 = PLANE('',#426686); +#426686 = AXIS2_PLACEMENT_3D('',#426687,#426688,#426689); +#426687 = CARTESIAN_POINT('',(139.6,-79.55,-3.5E-02)); +#426688 = DIRECTION('',(0.,0.,1.)); +#426689 = DIRECTION('',(1.,0.,-0.)); +#426690 = ADVANCED_FACE('',(#426691,#426694),#426705,.T.); +#426691 = FACE_BOUND('',#426692,.T.); +#426692 = EDGE_LOOP('',(#426693)); +#426693 = ORIENTED_EDGE('',*,*,#426651,.T.); +#426694 = FACE_BOUND('',#426695,.T.); +#426695 = EDGE_LOOP('',(#426696)); +#426696 = ORIENTED_EDGE('',*,*,#426697,.T.); +#426697 = EDGE_CURVE('',#426698,#426698,#426700,.T.); +#426698 = VERTEX_POINT('',#426699); +#426699 = CARTESIAN_POINT('',(139.6,-79.525,1.545)); +#426700 = CIRCLE('',#426701,0.125); +#426701 = AXIS2_PLACEMENT_3D('',#426702,#426703,#426704); +#426702 = CARTESIAN_POINT('',(139.6,-79.4,1.545)); +#426703 = DIRECTION('',(-0.,0.,-1.)); +#426704 = DIRECTION('',(-0.,-1.,0.)); +#426705 = PLANE('',#426706); +#426706 = AXIS2_PLACEMENT_3D('',#426707,#426708,#426709); +#426707 = CARTESIAN_POINT('',(139.6,-79.55,1.545)); +#426708 = DIRECTION('',(0.,0.,1.)); +#426709 = DIRECTION('',(1.,0.,-0.)); +#426710 = ADVANCED_FACE('',(#426711),#426722,.F.); +#426711 = FACE_BOUND('',#426712,.T.); +#426712 = EDGE_LOOP('',(#426713,#426714,#426720,#426721)); +#426713 = ORIENTED_EDGE('',*,*,#426677,.T.); +#426714 = ORIENTED_EDGE('',*,*,#426715,.T.); +#426715 = EDGE_CURVE('',#426678,#426698,#426716,.T.); +#426716 = LINE('',#426717,#426718); +#426717 = CARTESIAN_POINT('',(139.6,-79.525,-3.6E-02)); +#426718 = VECTOR('',#426719,1.); +#426719 = DIRECTION('',(0.,0.,1.)); +#426720 = ORIENTED_EDGE('',*,*,#426697,.F.); +#426721 = ORIENTED_EDGE('',*,*,#426715,.F.); +#426722 = CYLINDRICAL_SURFACE('',#426723,0.125); +#426723 = AXIS2_PLACEMENT_3D('',#426724,#426725,#426726); +#426724 = CARTESIAN_POINT('',(139.6,-79.4,-3.6E-02)); +#426725 = DIRECTION('',(-0.,-0.,-1.)); +#426726 = DIRECTION('',(-0.,-1.,0.)); +#426727 = MANIFOLD_SOLID_BREP('',#426728); +#426728 = CLOSED_SHELL('',(#426729,#426762,#426782,#426802)); +#426729 = ADVANCED_FACE('',(#426730),#426757,.T.); +#426730 = FACE_BOUND('',#426731,.F.); +#426731 = EDGE_LOOP('',(#426732,#426742,#426749,#426750)); +#426732 = ORIENTED_EDGE('',*,*,#426733,.T.); +#426733 = EDGE_CURVE('',#426734,#426736,#426738,.T.); +#426734 = VERTEX_POINT('',#426735); +#426735 = CARTESIAN_POINT('',(152.75,-112.65,-3.5E-02)); +#426736 = VERTEX_POINT('',#426737); +#426737 = CARTESIAN_POINT('',(152.75,-112.65,1.545)); +#426738 = LINE('',#426739,#426740); +#426739 = CARTESIAN_POINT('',(152.75,-112.65,-3.5E-02)); +#426740 = VECTOR('',#426741,1.); +#426741 = DIRECTION('',(0.,0.,1.)); +#426742 = ORIENTED_EDGE('',*,*,#426743,.T.); +#426743 = EDGE_CURVE('',#426736,#426736,#426744,.T.); +#426744 = CIRCLE('',#426745,0.15); +#426745 = AXIS2_PLACEMENT_3D('',#426746,#426747,#426748); +#426746 = CARTESIAN_POINT('',(152.75,-112.5,1.545)); +#426747 = DIRECTION('',(0.,0.,1.)); +#426748 = DIRECTION('',(-0.,-1.,0.)); +#426749 = ORIENTED_EDGE('',*,*,#426733,.F.); +#426750 = ORIENTED_EDGE('',*,*,#426751,.F.); +#426751 = EDGE_CURVE('',#426734,#426734,#426752,.T.); +#426752 = CIRCLE('',#426753,0.15); +#426753 = AXIS2_PLACEMENT_3D('',#426754,#426755,#426756); +#426754 = CARTESIAN_POINT('',(152.75,-112.5,-3.5E-02)); +#426755 = DIRECTION('',(0.,0.,1.)); +#426756 = DIRECTION('',(-0.,-1.,0.)); +#426757 = CYLINDRICAL_SURFACE('',#426758,0.15); +#426758 = AXIS2_PLACEMENT_3D('',#426759,#426760,#426761); +#426759 = CARTESIAN_POINT('',(152.75,-112.5,-3.5E-02)); +#426760 = DIRECTION('',(-0.,-0.,-1.)); +#426761 = DIRECTION('',(-0.,-1.,0.)); +#426762 = ADVANCED_FACE('',(#426763,#426766),#426777,.F.); +#426763 = FACE_BOUND('',#426764,.F.); +#426764 = EDGE_LOOP('',(#426765)); +#426765 = ORIENTED_EDGE('',*,*,#426751,.T.); +#426766 = FACE_BOUND('',#426767,.F.); +#426767 = EDGE_LOOP('',(#426768)); +#426768 = ORIENTED_EDGE('',*,*,#426769,.T.); +#426769 = EDGE_CURVE('',#426770,#426770,#426772,.T.); +#426770 = VERTEX_POINT('',#426771); +#426771 = CARTESIAN_POINT('',(152.75,-112.625,-3.5E-02)); +#426772 = CIRCLE('',#426773,0.125); +#426773 = AXIS2_PLACEMENT_3D('',#426774,#426775,#426776); +#426774 = CARTESIAN_POINT('',(152.75,-112.5,-3.5E-02)); +#426775 = DIRECTION('',(-0.,0.,-1.)); +#426776 = DIRECTION('',(-0.,-1.,0.)); +#426777 = PLANE('',#426778); +#426778 = AXIS2_PLACEMENT_3D('',#426779,#426780,#426781); +#426779 = CARTESIAN_POINT('',(152.75,-112.65,-3.5E-02)); +#426780 = DIRECTION('',(0.,0.,1.)); +#426781 = DIRECTION('',(1.,0.,-0.)); +#426782 = ADVANCED_FACE('',(#426783,#426786),#426797,.T.); +#426783 = FACE_BOUND('',#426784,.T.); +#426784 = EDGE_LOOP('',(#426785)); +#426785 = ORIENTED_EDGE('',*,*,#426743,.T.); +#426786 = FACE_BOUND('',#426787,.T.); +#426787 = EDGE_LOOP('',(#426788)); +#426788 = ORIENTED_EDGE('',*,*,#426789,.T.); +#426789 = EDGE_CURVE('',#426790,#426790,#426792,.T.); +#426790 = VERTEX_POINT('',#426791); +#426791 = CARTESIAN_POINT('',(152.75,-112.625,1.545)); +#426792 = CIRCLE('',#426793,0.125); +#426793 = AXIS2_PLACEMENT_3D('',#426794,#426795,#426796); +#426794 = CARTESIAN_POINT('',(152.75,-112.5,1.545)); +#426795 = DIRECTION('',(-0.,0.,-1.)); +#426796 = DIRECTION('',(-0.,-1.,0.)); +#426797 = PLANE('',#426798); +#426798 = AXIS2_PLACEMENT_3D('',#426799,#426800,#426801); +#426799 = CARTESIAN_POINT('',(152.75,-112.65,1.545)); +#426800 = DIRECTION('',(0.,0.,1.)); +#426801 = DIRECTION('',(1.,0.,-0.)); +#426802 = ADVANCED_FACE('',(#426803),#426814,.F.); +#426803 = FACE_BOUND('',#426804,.T.); +#426804 = EDGE_LOOP('',(#426805,#426806,#426812,#426813)); +#426805 = ORIENTED_EDGE('',*,*,#426769,.T.); +#426806 = ORIENTED_EDGE('',*,*,#426807,.T.); +#426807 = EDGE_CURVE('',#426770,#426790,#426808,.T.); +#426808 = LINE('',#426809,#426810); +#426809 = CARTESIAN_POINT('',(152.75,-112.625,-3.6E-02)); +#426810 = VECTOR('',#426811,1.); +#426811 = DIRECTION('',(0.,0.,1.)); +#426812 = ORIENTED_EDGE('',*,*,#426789,.F.); +#426813 = ORIENTED_EDGE('',*,*,#426807,.F.); +#426814 = CYLINDRICAL_SURFACE('',#426815,0.125); +#426815 = AXIS2_PLACEMENT_3D('',#426816,#426817,#426818); +#426816 = CARTESIAN_POINT('',(152.75,-112.5,-3.6E-02)); +#426817 = DIRECTION('',(-0.,-0.,-1.)); +#426818 = DIRECTION('',(-0.,-1.,0.)); +#426819 = MANIFOLD_SOLID_BREP('',#426820); +#426820 = CLOSED_SHELL('',(#426821,#426854,#426874,#426894)); +#426821 = ADVANCED_FACE('',(#426822),#426849,.T.); +#426822 = FACE_BOUND('',#426823,.F.); +#426823 = EDGE_LOOP('',(#426824,#426834,#426841,#426842)); +#426824 = ORIENTED_EDGE('',*,*,#426825,.T.); +#426825 = EDGE_CURVE('',#426826,#426828,#426830,.T.); +#426826 = VERTEX_POINT('',#426827); +#426827 = CARTESIAN_POINT('',(133.020634,-120.65,-3.5E-02)); +#426828 = VERTEX_POINT('',#426829); +#426829 = CARTESIAN_POINT('',(133.020634,-120.65,1.545)); +#426830 = LINE('',#426831,#426832); +#426831 = CARTESIAN_POINT('',(133.020634,-120.65,-3.5E-02)); +#426832 = VECTOR('',#426833,1.); +#426833 = DIRECTION('',(0.,0.,1.)); +#426834 = ORIENTED_EDGE('',*,*,#426835,.T.); +#426835 = EDGE_CURVE('',#426828,#426828,#426836,.T.); +#426836 = CIRCLE('',#426837,0.15); +#426837 = AXIS2_PLACEMENT_3D('',#426838,#426839,#426840); +#426838 = CARTESIAN_POINT('',(133.020634,-120.5,1.545)); +#426839 = DIRECTION('',(0.,0.,1.)); +#426840 = DIRECTION('',(-0.,-1.,0.)); +#426841 = ORIENTED_EDGE('',*,*,#426825,.F.); +#426842 = ORIENTED_EDGE('',*,*,#426843,.F.); +#426843 = EDGE_CURVE('',#426826,#426826,#426844,.T.); +#426844 = CIRCLE('',#426845,0.15); +#426845 = AXIS2_PLACEMENT_3D('',#426846,#426847,#426848); +#426846 = CARTESIAN_POINT('',(133.020634,-120.5,-3.5E-02)); +#426847 = DIRECTION('',(0.,0.,1.)); +#426848 = DIRECTION('',(-0.,-1.,0.)); +#426849 = CYLINDRICAL_SURFACE('',#426850,0.15); +#426850 = AXIS2_PLACEMENT_3D('',#426851,#426852,#426853); +#426851 = CARTESIAN_POINT('',(133.020634,-120.5,-3.5E-02)); +#426852 = DIRECTION('',(-0.,-0.,-1.)); +#426853 = DIRECTION('',(-0.,-1.,0.)); +#426854 = ADVANCED_FACE('',(#426855,#426858),#426869,.F.); +#426855 = FACE_BOUND('',#426856,.F.); +#426856 = EDGE_LOOP('',(#426857)); +#426857 = ORIENTED_EDGE('',*,*,#426843,.T.); +#426858 = FACE_BOUND('',#426859,.F.); +#426859 = EDGE_LOOP('',(#426860)); +#426860 = ORIENTED_EDGE('',*,*,#426861,.T.); +#426861 = EDGE_CURVE('',#426862,#426862,#426864,.T.); +#426862 = VERTEX_POINT('',#426863); +#426863 = CARTESIAN_POINT('',(133.020634,-120.625,-3.5E-02)); +#426864 = CIRCLE('',#426865,0.125); +#426865 = AXIS2_PLACEMENT_3D('',#426866,#426867,#426868); +#426866 = CARTESIAN_POINT('',(133.020634,-120.5,-3.5E-02)); +#426867 = DIRECTION('',(-0.,0.,-1.)); +#426868 = DIRECTION('',(-0.,-1.,0.)); +#426869 = PLANE('',#426870); +#426870 = AXIS2_PLACEMENT_3D('',#426871,#426872,#426873); +#426871 = CARTESIAN_POINT('',(133.020634,-120.65,-3.5E-02)); +#426872 = DIRECTION('',(0.,0.,1.)); +#426873 = DIRECTION('',(1.,0.,-0.)); +#426874 = ADVANCED_FACE('',(#426875,#426878),#426889,.T.); +#426875 = FACE_BOUND('',#426876,.T.); +#426876 = EDGE_LOOP('',(#426877)); +#426877 = ORIENTED_EDGE('',*,*,#426835,.T.); +#426878 = FACE_BOUND('',#426879,.T.); +#426879 = EDGE_LOOP('',(#426880)); +#426880 = ORIENTED_EDGE('',*,*,#426881,.T.); +#426881 = EDGE_CURVE('',#426882,#426882,#426884,.T.); +#426882 = VERTEX_POINT('',#426883); +#426883 = CARTESIAN_POINT('',(133.020634,-120.625,1.545)); +#426884 = CIRCLE('',#426885,0.125); +#426885 = AXIS2_PLACEMENT_3D('',#426886,#426887,#426888); +#426886 = CARTESIAN_POINT('',(133.020634,-120.5,1.545)); +#426887 = DIRECTION('',(-0.,0.,-1.)); +#426888 = DIRECTION('',(-0.,-1.,0.)); +#426889 = PLANE('',#426890); +#426890 = AXIS2_PLACEMENT_3D('',#426891,#426892,#426893); +#426891 = CARTESIAN_POINT('',(133.020634,-120.65,1.545)); +#426892 = DIRECTION('',(0.,0.,1.)); +#426893 = DIRECTION('',(1.,0.,-0.)); +#426894 = ADVANCED_FACE('',(#426895),#426906,.F.); +#426895 = FACE_BOUND('',#426896,.T.); +#426896 = EDGE_LOOP('',(#426897,#426898,#426904,#426905)); +#426897 = ORIENTED_EDGE('',*,*,#426861,.T.); +#426898 = ORIENTED_EDGE('',*,*,#426899,.T.); +#426899 = EDGE_CURVE('',#426862,#426882,#426900,.T.); +#426900 = LINE('',#426901,#426902); +#426901 = CARTESIAN_POINT('',(133.020634,-120.625,-3.6E-02)); +#426902 = VECTOR('',#426903,1.); +#426903 = DIRECTION('',(0.,0.,1.)); +#426904 = ORIENTED_EDGE('',*,*,#426881,.F.); +#426905 = ORIENTED_EDGE('',*,*,#426899,.F.); +#426906 = CYLINDRICAL_SURFACE('',#426907,0.125); +#426907 = AXIS2_PLACEMENT_3D('',#426908,#426909,#426910); +#426908 = CARTESIAN_POINT('',(133.020634,-120.5,-3.6E-02)); +#426909 = DIRECTION('',(-0.,-0.,-1.)); +#426910 = DIRECTION('',(-0.,-1.,0.)); +#426911 = MANIFOLD_SOLID_BREP('',#426912); +#426912 = CLOSED_SHELL('',(#426913,#426946,#426966,#426986)); +#426913 = ADVANCED_FACE('',(#426914),#426941,.T.); +#426914 = FACE_BOUND('',#426915,.F.); +#426915 = EDGE_LOOP('',(#426916,#426926,#426933,#426934)); +#426916 = ORIENTED_EDGE('',*,*,#426917,.T.); +#426917 = EDGE_CURVE('',#426918,#426920,#426922,.T.); +#426918 = VERTEX_POINT('',#426919); +#426919 = CARTESIAN_POINT('',(131.05,-111.35,-3.5E-02)); +#426920 = VERTEX_POINT('',#426921); +#426921 = CARTESIAN_POINT('',(131.05,-111.35,1.545)); +#426922 = LINE('',#426923,#426924); +#426923 = CARTESIAN_POINT('',(131.05,-111.35,-3.5E-02)); +#426924 = VECTOR('',#426925,1.); +#426925 = DIRECTION('',(0.,0.,1.)); +#426926 = ORIENTED_EDGE('',*,*,#426927,.T.); +#426927 = EDGE_CURVE('',#426920,#426920,#426928,.T.); +#426928 = CIRCLE('',#426929,0.15); +#426929 = AXIS2_PLACEMENT_3D('',#426930,#426931,#426932); +#426930 = CARTESIAN_POINT('',(131.05,-111.2,1.545)); +#426931 = DIRECTION('',(0.,0.,1.)); +#426932 = DIRECTION('',(-0.,-1.,0.)); +#426933 = ORIENTED_EDGE('',*,*,#426917,.F.); +#426934 = ORIENTED_EDGE('',*,*,#426935,.F.); +#426935 = EDGE_CURVE('',#426918,#426918,#426936,.T.); +#426936 = CIRCLE('',#426937,0.15); +#426937 = AXIS2_PLACEMENT_3D('',#426938,#426939,#426940); +#426938 = CARTESIAN_POINT('',(131.05,-111.2,-3.5E-02)); +#426939 = DIRECTION('',(0.,0.,1.)); +#426940 = DIRECTION('',(-0.,-1.,0.)); +#426941 = CYLINDRICAL_SURFACE('',#426942,0.15); +#426942 = AXIS2_PLACEMENT_3D('',#426943,#426944,#426945); +#426943 = CARTESIAN_POINT('',(131.05,-111.2,-3.5E-02)); +#426944 = DIRECTION('',(-0.,-0.,-1.)); +#426945 = DIRECTION('',(-0.,-1.,0.)); +#426946 = ADVANCED_FACE('',(#426947,#426950),#426961,.F.); +#426947 = FACE_BOUND('',#426948,.F.); +#426948 = EDGE_LOOP('',(#426949)); +#426949 = ORIENTED_EDGE('',*,*,#426935,.T.); +#426950 = FACE_BOUND('',#426951,.F.); +#426951 = EDGE_LOOP('',(#426952)); +#426952 = ORIENTED_EDGE('',*,*,#426953,.T.); +#426953 = EDGE_CURVE('',#426954,#426954,#426956,.T.); +#426954 = VERTEX_POINT('',#426955); +#426955 = CARTESIAN_POINT('',(131.05,-111.325,-3.5E-02)); +#426956 = CIRCLE('',#426957,0.125); +#426957 = AXIS2_PLACEMENT_3D('',#426958,#426959,#426960); +#426958 = CARTESIAN_POINT('',(131.05,-111.2,-3.5E-02)); +#426959 = DIRECTION('',(-0.,0.,-1.)); +#426960 = DIRECTION('',(-0.,-1.,0.)); +#426961 = PLANE('',#426962); +#426962 = AXIS2_PLACEMENT_3D('',#426963,#426964,#426965); +#426963 = CARTESIAN_POINT('',(131.05,-111.35,-3.5E-02)); +#426964 = DIRECTION('',(0.,0.,1.)); +#426965 = DIRECTION('',(1.,0.,-0.)); +#426966 = ADVANCED_FACE('',(#426967,#426970),#426981,.T.); +#426967 = FACE_BOUND('',#426968,.T.); +#426968 = EDGE_LOOP('',(#426969)); +#426969 = ORIENTED_EDGE('',*,*,#426927,.T.); +#426970 = FACE_BOUND('',#426971,.T.); +#426971 = EDGE_LOOP('',(#426972)); +#426972 = ORIENTED_EDGE('',*,*,#426973,.T.); +#426973 = EDGE_CURVE('',#426974,#426974,#426976,.T.); +#426974 = VERTEX_POINT('',#426975); +#426975 = CARTESIAN_POINT('',(131.05,-111.325,1.545)); +#426976 = CIRCLE('',#426977,0.125); +#426977 = AXIS2_PLACEMENT_3D('',#426978,#426979,#426980); +#426978 = CARTESIAN_POINT('',(131.05,-111.2,1.545)); +#426979 = DIRECTION('',(-0.,0.,-1.)); +#426980 = DIRECTION('',(-0.,-1.,0.)); +#426981 = PLANE('',#426982); +#426982 = AXIS2_PLACEMENT_3D('',#426983,#426984,#426985); +#426983 = CARTESIAN_POINT('',(131.05,-111.35,1.545)); +#426984 = DIRECTION('',(0.,0.,1.)); +#426985 = DIRECTION('',(1.,0.,-0.)); +#426986 = ADVANCED_FACE('',(#426987),#426998,.F.); +#426987 = FACE_BOUND('',#426988,.T.); +#426988 = EDGE_LOOP('',(#426989,#426990,#426996,#426997)); +#426989 = ORIENTED_EDGE('',*,*,#426953,.T.); +#426990 = ORIENTED_EDGE('',*,*,#426991,.T.); +#426991 = EDGE_CURVE('',#426954,#426974,#426992,.T.); +#426992 = LINE('',#426993,#426994); +#426993 = CARTESIAN_POINT('',(131.05,-111.325,-3.6E-02)); +#426994 = VECTOR('',#426995,1.); +#426995 = DIRECTION('',(0.,0.,1.)); +#426996 = ORIENTED_EDGE('',*,*,#426973,.F.); +#426997 = ORIENTED_EDGE('',*,*,#426991,.F.); +#426998 = CYLINDRICAL_SURFACE('',#426999,0.125); +#426999 = AXIS2_PLACEMENT_3D('',#427000,#427001,#427002); +#427000 = CARTESIAN_POINT('',(131.05,-111.2,-3.6E-02)); +#427001 = DIRECTION('',(-0.,-0.,-1.)); +#427002 = DIRECTION('',(-0.,-1.,0.)); +#427003 = MANIFOLD_SOLID_BREP('',#427004); +#427004 = CLOSED_SHELL('',(#427005,#427038,#427058,#427078)); +#427005 = ADVANCED_FACE('',(#427006),#427033,.T.); +#427006 = FACE_BOUND('',#427007,.F.); +#427007 = EDGE_LOOP('',(#427008,#427018,#427025,#427026)); +#427008 = ORIENTED_EDGE('',*,*,#427009,.T.); +#427009 = EDGE_CURVE('',#427010,#427012,#427014,.T.); +#427010 = VERTEX_POINT('',#427011); +#427011 = CARTESIAN_POINT('',(135.,-104.15,-3.5E-02)); +#427012 = VERTEX_POINT('',#427013); +#427013 = CARTESIAN_POINT('',(135.,-104.15,1.545)); +#427014 = LINE('',#427015,#427016); +#427015 = CARTESIAN_POINT('',(135.,-104.15,-3.5E-02)); +#427016 = VECTOR('',#427017,1.); +#427017 = DIRECTION('',(0.,0.,1.)); +#427018 = ORIENTED_EDGE('',*,*,#427019,.T.); +#427019 = EDGE_CURVE('',#427012,#427012,#427020,.T.); +#427020 = CIRCLE('',#427021,0.15); +#427021 = AXIS2_PLACEMENT_3D('',#427022,#427023,#427024); +#427022 = CARTESIAN_POINT('',(135.,-104.,1.545)); +#427023 = DIRECTION('',(0.,0.,1.)); +#427024 = DIRECTION('',(-0.,-1.,0.)); +#427025 = ORIENTED_EDGE('',*,*,#427009,.F.); +#427026 = ORIENTED_EDGE('',*,*,#427027,.F.); +#427027 = EDGE_CURVE('',#427010,#427010,#427028,.T.); +#427028 = CIRCLE('',#427029,0.15); +#427029 = AXIS2_PLACEMENT_3D('',#427030,#427031,#427032); +#427030 = CARTESIAN_POINT('',(135.,-104.,-3.5E-02)); +#427031 = DIRECTION('',(0.,0.,1.)); +#427032 = DIRECTION('',(-0.,-1.,0.)); +#427033 = CYLINDRICAL_SURFACE('',#427034,0.15); +#427034 = AXIS2_PLACEMENT_3D('',#427035,#427036,#427037); +#427035 = CARTESIAN_POINT('',(135.,-104.,-3.5E-02)); +#427036 = DIRECTION('',(-0.,-0.,-1.)); +#427037 = DIRECTION('',(-0.,-1.,0.)); +#427038 = ADVANCED_FACE('',(#427039,#427042),#427053,.F.); +#427039 = FACE_BOUND('',#427040,.F.); +#427040 = EDGE_LOOP('',(#427041)); +#427041 = ORIENTED_EDGE('',*,*,#427027,.T.); +#427042 = FACE_BOUND('',#427043,.F.); +#427043 = EDGE_LOOP('',(#427044)); +#427044 = ORIENTED_EDGE('',*,*,#427045,.T.); +#427045 = EDGE_CURVE('',#427046,#427046,#427048,.T.); +#427046 = VERTEX_POINT('',#427047); +#427047 = CARTESIAN_POINT('',(135.,-104.125,-3.5E-02)); +#427048 = CIRCLE('',#427049,0.125); +#427049 = AXIS2_PLACEMENT_3D('',#427050,#427051,#427052); +#427050 = CARTESIAN_POINT('',(135.,-104.,-3.5E-02)); +#427051 = DIRECTION('',(-0.,0.,-1.)); +#427052 = DIRECTION('',(-0.,-1.,0.)); +#427053 = PLANE('',#427054); +#427054 = AXIS2_PLACEMENT_3D('',#427055,#427056,#427057); +#427055 = CARTESIAN_POINT('',(135.,-104.15,-3.5E-02)); +#427056 = DIRECTION('',(0.,0.,1.)); +#427057 = DIRECTION('',(1.,0.,-0.)); +#427058 = ADVANCED_FACE('',(#427059,#427062),#427073,.T.); +#427059 = FACE_BOUND('',#427060,.T.); +#427060 = EDGE_LOOP('',(#427061)); +#427061 = ORIENTED_EDGE('',*,*,#427019,.T.); +#427062 = FACE_BOUND('',#427063,.T.); +#427063 = EDGE_LOOP('',(#427064)); +#427064 = ORIENTED_EDGE('',*,*,#427065,.T.); +#427065 = EDGE_CURVE('',#427066,#427066,#427068,.T.); +#427066 = VERTEX_POINT('',#427067); +#427067 = CARTESIAN_POINT('',(135.,-104.125,1.545)); +#427068 = CIRCLE('',#427069,0.125); +#427069 = AXIS2_PLACEMENT_3D('',#427070,#427071,#427072); +#427070 = CARTESIAN_POINT('',(135.,-104.,1.545)); +#427071 = DIRECTION('',(-0.,0.,-1.)); +#427072 = DIRECTION('',(-0.,-1.,0.)); +#427073 = PLANE('',#427074); +#427074 = AXIS2_PLACEMENT_3D('',#427075,#427076,#427077); +#427075 = CARTESIAN_POINT('',(135.,-104.15,1.545)); +#427076 = DIRECTION('',(0.,0.,1.)); +#427077 = DIRECTION('',(1.,0.,-0.)); +#427078 = ADVANCED_FACE('',(#427079),#427090,.F.); +#427079 = FACE_BOUND('',#427080,.T.); +#427080 = EDGE_LOOP('',(#427081,#427082,#427088,#427089)); +#427081 = ORIENTED_EDGE('',*,*,#427045,.T.); +#427082 = ORIENTED_EDGE('',*,*,#427083,.T.); +#427083 = EDGE_CURVE('',#427046,#427066,#427084,.T.); +#427084 = LINE('',#427085,#427086); +#427085 = CARTESIAN_POINT('',(135.,-104.125,-3.6E-02)); +#427086 = VECTOR('',#427087,1.); +#427087 = DIRECTION('',(0.,0.,1.)); +#427088 = ORIENTED_EDGE('',*,*,#427065,.F.); +#427089 = ORIENTED_EDGE('',*,*,#427083,.F.); +#427090 = CYLINDRICAL_SURFACE('',#427091,0.125); +#427091 = AXIS2_PLACEMENT_3D('',#427092,#427093,#427094); +#427092 = CARTESIAN_POINT('',(135.,-104.,-3.6E-02)); +#427093 = DIRECTION('',(-0.,-0.,-1.)); +#427094 = DIRECTION('',(-0.,-1.,0.)); +#427095 = MANIFOLD_SOLID_BREP('',#427096); +#427096 = CLOSED_SHELL('',(#427097,#427130,#427150,#427170)); +#427097 = ADVANCED_FACE('',(#427098),#427125,.T.); +#427098 = FACE_BOUND('',#427099,.F.); +#427099 = EDGE_LOOP('',(#427100,#427110,#427117,#427118)); +#427100 = ORIENTED_EDGE('',*,*,#427101,.T.); +#427101 = EDGE_CURVE('',#427102,#427104,#427106,.T.); +#427102 = VERTEX_POINT('',#427103); +#427103 = CARTESIAN_POINT('',(124.088235,-90.663235,-3.5E-02)); +#427104 = VERTEX_POINT('',#427105); +#427105 = CARTESIAN_POINT('',(124.088235,-90.663235,1.545)); +#427106 = LINE('',#427107,#427108); +#427107 = CARTESIAN_POINT('',(124.088235,-90.663235,-3.5E-02)); +#427108 = VECTOR('',#427109,1.); +#427109 = DIRECTION('',(0.,0.,1.)); +#427110 = ORIENTED_EDGE('',*,*,#427111,.T.); +#427111 = EDGE_CURVE('',#427104,#427104,#427112,.T.); +#427112 = CIRCLE('',#427113,0.15); +#427113 = AXIS2_PLACEMENT_3D('',#427114,#427115,#427116); +#427114 = CARTESIAN_POINT('',(124.088235,-90.513235,1.545)); +#427115 = DIRECTION('',(0.,0.,1.)); +#427116 = DIRECTION('',(-0.,-1.,0.)); +#427117 = ORIENTED_EDGE('',*,*,#427101,.F.); +#427118 = ORIENTED_EDGE('',*,*,#427119,.F.); +#427119 = EDGE_CURVE('',#427102,#427102,#427120,.T.); +#427120 = CIRCLE('',#427121,0.15); +#427121 = AXIS2_PLACEMENT_3D('',#427122,#427123,#427124); +#427122 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.5E-02)); +#427123 = DIRECTION('',(0.,0.,1.)); +#427124 = DIRECTION('',(-0.,-1.,0.)); +#427125 = CYLINDRICAL_SURFACE('',#427126,0.15); +#427126 = AXIS2_PLACEMENT_3D('',#427127,#427128,#427129); +#427127 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.5E-02)); +#427128 = DIRECTION('',(-0.,-0.,-1.)); +#427129 = DIRECTION('',(-0.,-1.,0.)); +#427130 = ADVANCED_FACE('',(#427131,#427134),#427145,.F.); +#427131 = FACE_BOUND('',#427132,.F.); +#427132 = EDGE_LOOP('',(#427133)); +#427133 = ORIENTED_EDGE('',*,*,#427119,.T.); +#427134 = FACE_BOUND('',#427135,.F.); +#427135 = EDGE_LOOP('',(#427136)); +#427136 = ORIENTED_EDGE('',*,*,#427137,.T.); +#427137 = EDGE_CURVE('',#427138,#427138,#427140,.T.); +#427138 = VERTEX_POINT('',#427139); +#427139 = CARTESIAN_POINT('',(124.088235,-90.638235,-3.5E-02)); +#427140 = CIRCLE('',#427141,0.125); +#427141 = AXIS2_PLACEMENT_3D('',#427142,#427143,#427144); +#427142 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.5E-02)); +#427143 = DIRECTION('',(-0.,0.,-1.)); +#427144 = DIRECTION('',(-0.,-1.,0.)); +#427145 = PLANE('',#427146); +#427146 = AXIS2_PLACEMENT_3D('',#427147,#427148,#427149); +#427147 = CARTESIAN_POINT('',(124.088235,-90.663235,-3.5E-02)); +#427148 = DIRECTION('',(0.,0.,1.)); +#427149 = DIRECTION('',(1.,0.,-0.)); +#427150 = ADVANCED_FACE('',(#427151,#427154),#427165,.T.); +#427151 = FACE_BOUND('',#427152,.T.); +#427152 = EDGE_LOOP('',(#427153)); +#427153 = ORIENTED_EDGE('',*,*,#427111,.T.); +#427154 = FACE_BOUND('',#427155,.T.); +#427155 = EDGE_LOOP('',(#427156)); +#427156 = ORIENTED_EDGE('',*,*,#427157,.T.); +#427157 = EDGE_CURVE('',#427158,#427158,#427160,.T.); +#427158 = VERTEX_POINT('',#427159); +#427159 = CARTESIAN_POINT('',(124.088235,-90.638235,1.545)); +#427160 = CIRCLE('',#427161,0.125); +#427161 = AXIS2_PLACEMENT_3D('',#427162,#427163,#427164); +#427162 = CARTESIAN_POINT('',(124.088235,-90.513235,1.545)); +#427163 = DIRECTION('',(-0.,0.,-1.)); +#427164 = DIRECTION('',(-0.,-1.,0.)); +#427165 = PLANE('',#427166); +#427166 = AXIS2_PLACEMENT_3D('',#427167,#427168,#427169); +#427167 = CARTESIAN_POINT('',(124.088235,-90.663235,1.545)); +#427168 = DIRECTION('',(0.,0.,1.)); +#427169 = DIRECTION('',(1.,0.,-0.)); +#427170 = ADVANCED_FACE('',(#427171),#427182,.F.); +#427171 = FACE_BOUND('',#427172,.T.); +#427172 = EDGE_LOOP('',(#427173,#427174,#427180,#427181)); +#427173 = ORIENTED_EDGE('',*,*,#427137,.T.); +#427174 = ORIENTED_EDGE('',*,*,#427175,.T.); +#427175 = EDGE_CURVE('',#427138,#427158,#427176,.T.); +#427176 = LINE('',#427177,#427178); +#427177 = CARTESIAN_POINT('',(124.088235,-90.638235,-3.6E-02)); +#427178 = VECTOR('',#427179,1.); +#427179 = DIRECTION('',(0.,0.,1.)); +#427180 = ORIENTED_EDGE('',*,*,#427157,.F.); +#427181 = ORIENTED_EDGE('',*,*,#427175,.F.); +#427182 = CYLINDRICAL_SURFACE('',#427183,0.125); +#427183 = AXIS2_PLACEMENT_3D('',#427184,#427185,#427186); +#427184 = CARTESIAN_POINT('',(124.088235,-90.513235,-3.6E-02)); +#427185 = DIRECTION('',(-0.,-0.,-1.)); +#427186 = DIRECTION('',(-0.,-1.,0.)); +#427187 = MANIFOLD_SOLID_BREP('',#427188); +#427188 = CLOSED_SHELL('',(#427189,#427222,#427242,#427262)); +#427189 = ADVANCED_FACE('',(#427190),#427217,.T.); +#427190 = FACE_BOUND('',#427191,.F.); +#427191 = EDGE_LOOP('',(#427192,#427202,#427209,#427210)); +#427192 = ORIENTED_EDGE('',*,*,#427193,.T.); +#427193 = EDGE_CURVE('',#427194,#427196,#427198,.T.); +#427194 = VERTEX_POINT('',#427195); +#427195 = CARTESIAN_POINT('',(128.,-105.65,-3.5E-02)); +#427196 = VERTEX_POINT('',#427197); +#427197 = CARTESIAN_POINT('',(128.,-105.65,1.545)); +#427198 = LINE('',#427199,#427200); +#427199 = CARTESIAN_POINT('',(128.,-105.65,-3.5E-02)); +#427200 = VECTOR('',#427201,1.); +#427201 = DIRECTION('',(0.,0.,1.)); +#427202 = ORIENTED_EDGE('',*,*,#427203,.T.); +#427203 = EDGE_CURVE('',#427196,#427196,#427204,.T.); +#427204 = CIRCLE('',#427205,0.15); +#427205 = AXIS2_PLACEMENT_3D('',#427206,#427207,#427208); +#427206 = CARTESIAN_POINT('',(128.,-105.5,1.545)); +#427207 = DIRECTION('',(0.,0.,1.)); +#427208 = DIRECTION('',(-0.,-1.,0.)); +#427209 = ORIENTED_EDGE('',*,*,#427193,.F.); +#427210 = ORIENTED_EDGE('',*,*,#427211,.F.); +#427211 = EDGE_CURVE('',#427194,#427194,#427212,.T.); +#427212 = CIRCLE('',#427213,0.15); +#427213 = AXIS2_PLACEMENT_3D('',#427214,#427215,#427216); +#427214 = CARTESIAN_POINT('',(128.,-105.5,-3.5E-02)); +#427215 = DIRECTION('',(0.,0.,1.)); +#427216 = DIRECTION('',(-0.,-1.,0.)); +#427217 = CYLINDRICAL_SURFACE('',#427218,0.15); +#427218 = AXIS2_PLACEMENT_3D('',#427219,#427220,#427221); +#427219 = CARTESIAN_POINT('',(128.,-105.5,-3.5E-02)); +#427220 = DIRECTION('',(-0.,-0.,-1.)); +#427221 = DIRECTION('',(-0.,-1.,0.)); +#427222 = ADVANCED_FACE('',(#427223,#427226),#427237,.F.); +#427223 = FACE_BOUND('',#427224,.F.); +#427224 = EDGE_LOOP('',(#427225)); +#427225 = ORIENTED_EDGE('',*,*,#427211,.T.); +#427226 = FACE_BOUND('',#427227,.F.); +#427227 = EDGE_LOOP('',(#427228)); +#427228 = ORIENTED_EDGE('',*,*,#427229,.T.); +#427229 = EDGE_CURVE('',#427230,#427230,#427232,.T.); +#427230 = VERTEX_POINT('',#427231); +#427231 = CARTESIAN_POINT('',(128.,-105.625,-3.5E-02)); +#427232 = CIRCLE('',#427233,0.125); +#427233 = AXIS2_PLACEMENT_3D('',#427234,#427235,#427236); +#427234 = CARTESIAN_POINT('',(128.,-105.5,-3.5E-02)); +#427235 = DIRECTION('',(-0.,0.,-1.)); +#427236 = DIRECTION('',(-0.,-1.,0.)); +#427237 = PLANE('',#427238); +#427238 = AXIS2_PLACEMENT_3D('',#427239,#427240,#427241); +#427239 = CARTESIAN_POINT('',(128.,-105.65,-3.5E-02)); +#427240 = DIRECTION('',(0.,0.,1.)); +#427241 = DIRECTION('',(1.,0.,-0.)); +#427242 = ADVANCED_FACE('',(#427243,#427246),#427257,.T.); +#427243 = FACE_BOUND('',#427244,.T.); +#427244 = EDGE_LOOP('',(#427245)); +#427245 = ORIENTED_EDGE('',*,*,#427203,.T.); +#427246 = FACE_BOUND('',#427247,.T.); +#427247 = EDGE_LOOP('',(#427248)); +#427248 = ORIENTED_EDGE('',*,*,#427249,.T.); +#427249 = EDGE_CURVE('',#427250,#427250,#427252,.T.); +#427250 = VERTEX_POINT('',#427251); +#427251 = CARTESIAN_POINT('',(128.,-105.625,1.545)); +#427252 = CIRCLE('',#427253,0.125); +#427253 = AXIS2_PLACEMENT_3D('',#427254,#427255,#427256); +#427254 = CARTESIAN_POINT('',(128.,-105.5,1.545)); +#427255 = DIRECTION('',(-0.,0.,-1.)); +#427256 = DIRECTION('',(-0.,-1.,0.)); +#427257 = PLANE('',#427258); +#427258 = AXIS2_PLACEMENT_3D('',#427259,#427260,#427261); +#427259 = CARTESIAN_POINT('',(128.,-105.65,1.545)); +#427260 = DIRECTION('',(0.,0.,1.)); +#427261 = DIRECTION('',(1.,0.,-0.)); +#427262 = ADVANCED_FACE('',(#427263),#427274,.F.); +#427263 = FACE_BOUND('',#427264,.T.); +#427264 = EDGE_LOOP('',(#427265,#427266,#427272,#427273)); +#427265 = ORIENTED_EDGE('',*,*,#427229,.T.); +#427266 = ORIENTED_EDGE('',*,*,#427267,.T.); +#427267 = EDGE_CURVE('',#427230,#427250,#427268,.T.); +#427268 = LINE('',#427269,#427270); +#427269 = CARTESIAN_POINT('',(128.,-105.625,-3.6E-02)); +#427270 = VECTOR('',#427271,1.); +#427271 = DIRECTION('',(0.,0.,1.)); +#427272 = ORIENTED_EDGE('',*,*,#427249,.F.); +#427273 = ORIENTED_EDGE('',*,*,#427267,.F.); +#427274 = CYLINDRICAL_SURFACE('',#427275,0.125); +#427275 = AXIS2_PLACEMENT_3D('',#427276,#427277,#427278); +#427276 = CARTESIAN_POINT('',(128.,-105.5,-3.6E-02)); +#427277 = DIRECTION('',(-0.,-0.,-1.)); +#427278 = DIRECTION('',(-0.,-1.,0.)); +#427279 = MANIFOLD_SOLID_BREP('',#427280); +#427280 = CLOSED_SHELL('',(#427281,#427314,#427334,#427354)); +#427281 = ADVANCED_FACE('',(#427282),#427309,.T.); +#427282 = FACE_BOUND('',#427283,.F.); +#427283 = EDGE_LOOP('',(#427284,#427294,#427301,#427302)); +#427284 = ORIENTED_EDGE('',*,*,#427285,.T.); +#427285 = EDGE_CURVE('',#427286,#427288,#427290,.T.); +#427286 = VERTEX_POINT('',#427287); +#427287 = CARTESIAN_POINT('',(139.5,-118.65,-3.5E-02)); +#427288 = VERTEX_POINT('',#427289); +#427289 = CARTESIAN_POINT('',(139.5,-118.65,1.545)); +#427290 = LINE('',#427291,#427292); +#427291 = CARTESIAN_POINT('',(139.5,-118.65,-3.5E-02)); +#427292 = VECTOR('',#427293,1.); +#427293 = DIRECTION('',(0.,0.,1.)); +#427294 = ORIENTED_EDGE('',*,*,#427295,.T.); +#427295 = EDGE_CURVE('',#427288,#427288,#427296,.T.); +#427296 = CIRCLE('',#427297,0.15); +#427297 = AXIS2_PLACEMENT_3D('',#427298,#427299,#427300); +#427298 = CARTESIAN_POINT('',(139.5,-118.5,1.545)); +#427299 = DIRECTION('',(0.,0.,1.)); +#427300 = DIRECTION('',(-0.,-1.,0.)); +#427301 = ORIENTED_EDGE('',*,*,#427285,.F.); +#427302 = ORIENTED_EDGE('',*,*,#427303,.F.); +#427303 = EDGE_CURVE('',#427286,#427286,#427304,.T.); +#427304 = CIRCLE('',#427305,0.15); +#427305 = AXIS2_PLACEMENT_3D('',#427306,#427307,#427308); +#427306 = CARTESIAN_POINT('',(139.5,-118.5,-3.5E-02)); +#427307 = DIRECTION('',(0.,0.,1.)); +#427308 = DIRECTION('',(-0.,-1.,0.)); +#427309 = CYLINDRICAL_SURFACE('',#427310,0.15); +#427310 = AXIS2_PLACEMENT_3D('',#427311,#427312,#427313); +#427311 = CARTESIAN_POINT('',(139.5,-118.5,-3.5E-02)); +#427312 = DIRECTION('',(-0.,-0.,-1.)); +#427313 = DIRECTION('',(-0.,-1.,0.)); +#427314 = ADVANCED_FACE('',(#427315,#427318),#427329,.F.); +#427315 = FACE_BOUND('',#427316,.F.); +#427316 = EDGE_LOOP('',(#427317)); +#427317 = ORIENTED_EDGE('',*,*,#427303,.T.); +#427318 = FACE_BOUND('',#427319,.F.); +#427319 = EDGE_LOOP('',(#427320)); +#427320 = ORIENTED_EDGE('',*,*,#427321,.T.); +#427321 = EDGE_CURVE('',#427322,#427322,#427324,.T.); +#427322 = VERTEX_POINT('',#427323); +#427323 = CARTESIAN_POINT('',(139.5,-118.625,-3.5E-02)); +#427324 = CIRCLE('',#427325,0.125); +#427325 = AXIS2_PLACEMENT_3D('',#427326,#427327,#427328); +#427326 = CARTESIAN_POINT('',(139.5,-118.5,-3.5E-02)); +#427327 = DIRECTION('',(-0.,0.,-1.)); +#427328 = DIRECTION('',(-0.,-1.,0.)); +#427329 = PLANE('',#427330); +#427330 = AXIS2_PLACEMENT_3D('',#427331,#427332,#427333); +#427331 = CARTESIAN_POINT('',(139.5,-118.65,-3.5E-02)); +#427332 = DIRECTION('',(0.,0.,1.)); +#427333 = DIRECTION('',(1.,0.,-0.)); +#427334 = ADVANCED_FACE('',(#427335,#427338),#427349,.T.); +#427335 = FACE_BOUND('',#427336,.T.); +#427336 = EDGE_LOOP('',(#427337)); +#427337 = ORIENTED_EDGE('',*,*,#427295,.T.); +#427338 = FACE_BOUND('',#427339,.T.); +#427339 = EDGE_LOOP('',(#427340)); +#427340 = ORIENTED_EDGE('',*,*,#427341,.T.); +#427341 = EDGE_CURVE('',#427342,#427342,#427344,.T.); +#427342 = VERTEX_POINT('',#427343); +#427343 = CARTESIAN_POINT('',(139.5,-118.625,1.545)); +#427344 = CIRCLE('',#427345,0.125); +#427345 = AXIS2_PLACEMENT_3D('',#427346,#427347,#427348); +#427346 = CARTESIAN_POINT('',(139.5,-118.5,1.545)); +#427347 = DIRECTION('',(-0.,0.,-1.)); +#427348 = DIRECTION('',(-0.,-1.,0.)); +#427349 = PLANE('',#427350); +#427350 = AXIS2_PLACEMENT_3D('',#427351,#427352,#427353); +#427351 = CARTESIAN_POINT('',(139.5,-118.65,1.545)); +#427352 = DIRECTION('',(0.,0.,1.)); +#427353 = DIRECTION('',(1.,0.,-0.)); +#427354 = ADVANCED_FACE('',(#427355),#427366,.F.); +#427355 = FACE_BOUND('',#427356,.T.); +#427356 = EDGE_LOOP('',(#427357,#427358,#427364,#427365)); +#427357 = ORIENTED_EDGE('',*,*,#427321,.T.); +#427358 = ORIENTED_EDGE('',*,*,#427359,.T.); +#427359 = EDGE_CURVE('',#427322,#427342,#427360,.T.); +#427360 = LINE('',#427361,#427362); +#427361 = CARTESIAN_POINT('',(139.5,-118.625,-3.6E-02)); +#427362 = VECTOR('',#427363,1.); +#427363 = DIRECTION('',(0.,0.,1.)); +#427364 = ORIENTED_EDGE('',*,*,#427341,.F.); +#427365 = ORIENTED_EDGE('',*,*,#427359,.F.); +#427366 = CYLINDRICAL_SURFACE('',#427367,0.125); +#427367 = AXIS2_PLACEMENT_3D('',#427368,#427369,#427370); +#427368 = CARTESIAN_POINT('',(139.5,-118.5,-3.6E-02)); +#427369 = DIRECTION('',(-0.,-0.,-1.)); +#427370 = DIRECTION('',(-0.,-1.,0.)); +#427371 = MANIFOLD_SOLID_BREP('',#427372); +#427372 = CLOSED_SHELL('',(#427373,#427406,#427426,#427446)); +#427373 = ADVANCED_FACE('',(#427374),#427401,.T.); +#427374 = FACE_BOUND('',#427375,.F.); +#427375 = EDGE_LOOP('',(#427376,#427386,#427393,#427394)); +#427376 = ORIENTED_EDGE('',*,*,#427377,.T.); +#427377 = EDGE_CURVE('',#427378,#427380,#427382,.T.); +#427378 = VERTEX_POINT('',#427379); +#427379 = CARTESIAN_POINT('',(149.8,-150.95,-3.5E-02)); +#427380 = VERTEX_POINT('',#427381); +#427381 = CARTESIAN_POINT('',(149.8,-150.95,1.545)); +#427382 = LINE('',#427383,#427384); +#427383 = CARTESIAN_POINT('',(149.8,-150.95,-3.5E-02)); +#427384 = VECTOR('',#427385,1.); +#427385 = DIRECTION('',(0.,0.,1.)); +#427386 = ORIENTED_EDGE('',*,*,#427387,.T.); +#427387 = EDGE_CURVE('',#427380,#427380,#427388,.T.); +#427388 = CIRCLE('',#427389,0.15); +#427389 = AXIS2_PLACEMENT_3D('',#427390,#427391,#427392); +#427390 = CARTESIAN_POINT('',(149.8,-150.8,1.545)); +#427391 = DIRECTION('',(0.,0.,1.)); +#427392 = DIRECTION('',(-0.,-1.,0.)); +#427393 = ORIENTED_EDGE('',*,*,#427377,.F.); +#427394 = ORIENTED_EDGE('',*,*,#427395,.F.); +#427395 = EDGE_CURVE('',#427378,#427378,#427396,.T.); +#427396 = CIRCLE('',#427397,0.15); +#427397 = AXIS2_PLACEMENT_3D('',#427398,#427399,#427400); +#427398 = CARTESIAN_POINT('',(149.8,-150.8,-3.5E-02)); +#427399 = DIRECTION('',(0.,0.,1.)); +#427400 = DIRECTION('',(-0.,-1.,0.)); +#427401 = CYLINDRICAL_SURFACE('',#427402,0.15); +#427402 = AXIS2_PLACEMENT_3D('',#427403,#427404,#427405); +#427403 = CARTESIAN_POINT('',(149.8,-150.8,-3.5E-02)); +#427404 = DIRECTION('',(-0.,-0.,-1.)); +#427405 = DIRECTION('',(-0.,-1.,0.)); +#427406 = ADVANCED_FACE('',(#427407,#427410),#427421,.F.); +#427407 = FACE_BOUND('',#427408,.F.); +#427408 = EDGE_LOOP('',(#427409)); +#427409 = ORIENTED_EDGE('',*,*,#427395,.T.); +#427410 = FACE_BOUND('',#427411,.F.); +#427411 = EDGE_LOOP('',(#427412)); +#427412 = ORIENTED_EDGE('',*,*,#427413,.T.); +#427413 = EDGE_CURVE('',#427414,#427414,#427416,.T.); +#427414 = VERTEX_POINT('',#427415); +#427415 = CARTESIAN_POINT('',(149.8,-150.925,-3.5E-02)); +#427416 = CIRCLE('',#427417,0.125); +#427417 = AXIS2_PLACEMENT_3D('',#427418,#427419,#427420); +#427418 = CARTESIAN_POINT('',(149.8,-150.8,-3.5E-02)); +#427419 = DIRECTION('',(-0.,0.,-1.)); +#427420 = DIRECTION('',(-0.,-1.,0.)); +#427421 = PLANE('',#427422); +#427422 = AXIS2_PLACEMENT_3D('',#427423,#427424,#427425); +#427423 = CARTESIAN_POINT('',(149.8,-150.95,-3.5E-02)); +#427424 = DIRECTION('',(0.,0.,1.)); +#427425 = DIRECTION('',(1.,0.,-0.)); +#427426 = ADVANCED_FACE('',(#427427,#427430),#427441,.T.); +#427427 = FACE_BOUND('',#427428,.T.); +#427428 = EDGE_LOOP('',(#427429)); +#427429 = ORIENTED_EDGE('',*,*,#427387,.T.); +#427430 = FACE_BOUND('',#427431,.T.); +#427431 = EDGE_LOOP('',(#427432)); +#427432 = ORIENTED_EDGE('',*,*,#427433,.T.); +#427433 = EDGE_CURVE('',#427434,#427434,#427436,.T.); +#427434 = VERTEX_POINT('',#427435); +#427435 = CARTESIAN_POINT('',(149.8,-150.925,1.545)); +#427436 = CIRCLE('',#427437,0.125); +#427437 = AXIS2_PLACEMENT_3D('',#427438,#427439,#427440); +#427438 = CARTESIAN_POINT('',(149.8,-150.8,1.545)); +#427439 = DIRECTION('',(-0.,0.,-1.)); +#427440 = DIRECTION('',(-0.,-1.,0.)); +#427441 = PLANE('',#427442); +#427442 = AXIS2_PLACEMENT_3D('',#427443,#427444,#427445); +#427443 = CARTESIAN_POINT('',(149.8,-150.95,1.545)); +#427444 = DIRECTION('',(0.,0.,1.)); +#427445 = DIRECTION('',(1.,0.,-0.)); +#427446 = ADVANCED_FACE('',(#427447),#427458,.F.); +#427447 = FACE_BOUND('',#427448,.T.); +#427448 = EDGE_LOOP('',(#427449,#427450,#427456,#427457)); +#427449 = ORIENTED_EDGE('',*,*,#427413,.T.); +#427450 = ORIENTED_EDGE('',*,*,#427451,.T.); +#427451 = EDGE_CURVE('',#427414,#427434,#427452,.T.); +#427452 = LINE('',#427453,#427454); +#427453 = CARTESIAN_POINT('',(149.8,-150.925,-3.6E-02)); +#427454 = VECTOR('',#427455,1.); +#427455 = DIRECTION('',(0.,0.,1.)); +#427456 = ORIENTED_EDGE('',*,*,#427433,.F.); +#427457 = ORIENTED_EDGE('',*,*,#427451,.F.); +#427458 = CYLINDRICAL_SURFACE('',#427459,0.125); +#427459 = AXIS2_PLACEMENT_3D('',#427460,#427461,#427462); +#427460 = CARTESIAN_POINT('',(149.8,-150.8,-3.6E-02)); +#427461 = DIRECTION('',(-0.,-0.,-1.)); +#427462 = DIRECTION('',(-0.,-1.,0.)); +#427463 = MANIFOLD_SOLID_BREP('',#427464); +#427464 = CLOSED_SHELL('',(#427465,#427498,#427518,#427538)); +#427465 = ADVANCED_FACE('',(#427466),#427493,.T.); +#427466 = FACE_BOUND('',#427467,.F.); +#427467 = EDGE_LOOP('',(#427468,#427478,#427485,#427486)); +#427468 = ORIENTED_EDGE('',*,*,#427469,.T.); +#427469 = EDGE_CURVE('',#427470,#427472,#427474,.T.); +#427470 = VERTEX_POINT('',#427471); +#427471 = CARTESIAN_POINT('',(134.7,-119.9,-3.5E-02)); +#427472 = VERTEX_POINT('',#427473); +#427473 = CARTESIAN_POINT('',(134.7,-119.9,1.545)); +#427474 = LINE('',#427475,#427476); +#427475 = CARTESIAN_POINT('',(134.7,-119.9,-3.5E-02)); +#427476 = VECTOR('',#427477,1.); +#427477 = DIRECTION('',(0.,0.,1.)); +#427478 = ORIENTED_EDGE('',*,*,#427479,.T.); +#427479 = EDGE_CURVE('',#427472,#427472,#427480,.T.); +#427480 = CIRCLE('',#427481,0.15); +#427481 = AXIS2_PLACEMENT_3D('',#427482,#427483,#427484); +#427482 = CARTESIAN_POINT('',(134.7,-119.75,1.545)); +#427483 = DIRECTION('',(0.,0.,1.)); +#427484 = DIRECTION('',(-0.,-1.,0.)); +#427485 = ORIENTED_EDGE('',*,*,#427469,.F.); +#427486 = ORIENTED_EDGE('',*,*,#427487,.F.); +#427487 = EDGE_CURVE('',#427470,#427470,#427488,.T.); +#427488 = CIRCLE('',#427489,0.15); +#427489 = AXIS2_PLACEMENT_3D('',#427490,#427491,#427492); +#427490 = CARTESIAN_POINT('',(134.7,-119.75,-3.5E-02)); +#427491 = DIRECTION('',(0.,0.,1.)); +#427492 = DIRECTION('',(-0.,-1.,0.)); +#427493 = CYLINDRICAL_SURFACE('',#427494,0.15); +#427494 = AXIS2_PLACEMENT_3D('',#427495,#427496,#427497); +#427495 = CARTESIAN_POINT('',(134.7,-119.75,-3.5E-02)); +#427496 = DIRECTION('',(-0.,-0.,-1.)); +#427497 = DIRECTION('',(-0.,-1.,0.)); +#427498 = ADVANCED_FACE('',(#427499,#427502),#427513,.F.); +#427499 = FACE_BOUND('',#427500,.F.); +#427500 = EDGE_LOOP('',(#427501)); +#427501 = ORIENTED_EDGE('',*,*,#427487,.T.); +#427502 = FACE_BOUND('',#427503,.F.); +#427503 = EDGE_LOOP('',(#427504)); +#427504 = ORIENTED_EDGE('',*,*,#427505,.T.); +#427505 = EDGE_CURVE('',#427506,#427506,#427508,.T.); +#427506 = VERTEX_POINT('',#427507); +#427507 = CARTESIAN_POINT('',(134.7,-119.875,-3.5E-02)); +#427508 = CIRCLE('',#427509,0.125); +#427509 = AXIS2_PLACEMENT_3D('',#427510,#427511,#427512); +#427510 = CARTESIAN_POINT('',(134.7,-119.75,-3.5E-02)); +#427511 = DIRECTION('',(-0.,0.,-1.)); +#427512 = DIRECTION('',(-0.,-1.,0.)); +#427513 = PLANE('',#427514); +#427514 = AXIS2_PLACEMENT_3D('',#427515,#427516,#427517); +#427515 = CARTESIAN_POINT('',(134.7,-119.9,-3.5E-02)); +#427516 = DIRECTION('',(0.,0.,1.)); +#427517 = DIRECTION('',(1.,0.,-0.)); +#427518 = ADVANCED_FACE('',(#427519,#427522),#427533,.T.); +#427519 = FACE_BOUND('',#427520,.T.); +#427520 = EDGE_LOOP('',(#427521)); +#427521 = ORIENTED_EDGE('',*,*,#427479,.T.); +#427522 = FACE_BOUND('',#427523,.T.); +#427523 = EDGE_LOOP('',(#427524)); +#427524 = ORIENTED_EDGE('',*,*,#427525,.T.); +#427525 = EDGE_CURVE('',#427526,#427526,#427528,.T.); +#427526 = VERTEX_POINT('',#427527); +#427527 = CARTESIAN_POINT('',(134.7,-119.875,1.545)); +#427528 = CIRCLE('',#427529,0.125); +#427529 = AXIS2_PLACEMENT_3D('',#427530,#427531,#427532); +#427530 = CARTESIAN_POINT('',(134.7,-119.75,1.545)); +#427531 = DIRECTION('',(-0.,0.,-1.)); +#427532 = DIRECTION('',(-0.,-1.,0.)); +#427533 = PLANE('',#427534); +#427534 = AXIS2_PLACEMENT_3D('',#427535,#427536,#427537); +#427535 = CARTESIAN_POINT('',(134.7,-119.9,1.545)); +#427536 = DIRECTION('',(0.,0.,1.)); +#427537 = DIRECTION('',(1.,0.,-0.)); +#427538 = ADVANCED_FACE('',(#427539),#427550,.F.); +#427539 = FACE_BOUND('',#427540,.T.); +#427540 = EDGE_LOOP('',(#427541,#427542,#427548,#427549)); +#427541 = ORIENTED_EDGE('',*,*,#427505,.T.); +#427542 = ORIENTED_EDGE('',*,*,#427543,.T.); +#427543 = EDGE_CURVE('',#427506,#427526,#427544,.T.); +#427544 = LINE('',#427545,#427546); +#427545 = CARTESIAN_POINT('',(134.7,-119.875,-3.6E-02)); +#427546 = VECTOR('',#427547,1.); +#427547 = DIRECTION('',(0.,0.,1.)); +#427548 = ORIENTED_EDGE('',*,*,#427525,.F.); +#427549 = ORIENTED_EDGE('',*,*,#427543,.F.); +#427550 = CYLINDRICAL_SURFACE('',#427551,0.125); +#427551 = AXIS2_PLACEMENT_3D('',#427552,#427553,#427554); +#427552 = CARTESIAN_POINT('',(134.7,-119.75,-3.6E-02)); +#427553 = DIRECTION('',(-0.,-0.,-1.)); +#427554 = DIRECTION('',(-0.,-1.,0.)); +#427555 = MANIFOLD_SOLID_BREP('',#427556); +#427556 = CLOSED_SHELL('',(#427557,#427590,#427610,#427630)); +#427557 = ADVANCED_FACE('',(#427558),#427585,.T.); +#427558 = FACE_BOUND('',#427559,.F.); +#427559 = EDGE_LOOP('',(#427560,#427570,#427577,#427578)); +#427560 = ORIENTED_EDGE('',*,*,#427561,.T.); +#427561 = EDGE_CURVE('',#427562,#427564,#427566,.T.); +#427562 = VERTEX_POINT('',#427563); +#427563 = CARTESIAN_POINT('',(139.5,-88.15,-3.5E-02)); +#427564 = VERTEX_POINT('',#427565); +#427565 = CARTESIAN_POINT('',(139.5,-88.15,1.545)); +#427566 = LINE('',#427567,#427568); +#427567 = CARTESIAN_POINT('',(139.5,-88.15,-3.5E-02)); +#427568 = VECTOR('',#427569,1.); +#427569 = DIRECTION('',(0.,0.,1.)); +#427570 = ORIENTED_EDGE('',*,*,#427571,.T.); +#427571 = EDGE_CURVE('',#427564,#427564,#427572,.T.); +#427572 = CIRCLE('',#427573,0.15); +#427573 = AXIS2_PLACEMENT_3D('',#427574,#427575,#427576); +#427574 = CARTESIAN_POINT('',(139.5,-88.,1.545)); +#427575 = DIRECTION('',(0.,0.,1.)); +#427576 = DIRECTION('',(-0.,-1.,0.)); +#427577 = ORIENTED_EDGE('',*,*,#427561,.F.); +#427578 = ORIENTED_EDGE('',*,*,#427579,.F.); +#427579 = EDGE_CURVE('',#427562,#427562,#427580,.T.); +#427580 = CIRCLE('',#427581,0.15); +#427581 = AXIS2_PLACEMENT_3D('',#427582,#427583,#427584); +#427582 = CARTESIAN_POINT('',(139.5,-88.,-3.5E-02)); +#427583 = DIRECTION('',(0.,0.,1.)); +#427584 = DIRECTION('',(-0.,-1.,0.)); +#427585 = CYLINDRICAL_SURFACE('',#427586,0.15); +#427586 = AXIS2_PLACEMENT_3D('',#427587,#427588,#427589); +#427587 = CARTESIAN_POINT('',(139.5,-88.,-3.5E-02)); +#427588 = DIRECTION('',(-0.,-0.,-1.)); +#427589 = DIRECTION('',(-0.,-1.,0.)); +#427590 = ADVANCED_FACE('',(#427591,#427594),#427605,.F.); +#427591 = FACE_BOUND('',#427592,.F.); +#427592 = EDGE_LOOP('',(#427593)); +#427593 = ORIENTED_EDGE('',*,*,#427579,.T.); +#427594 = FACE_BOUND('',#427595,.F.); +#427595 = EDGE_LOOP('',(#427596)); +#427596 = ORIENTED_EDGE('',*,*,#427597,.T.); +#427597 = EDGE_CURVE('',#427598,#427598,#427600,.T.); +#427598 = VERTEX_POINT('',#427599); +#427599 = CARTESIAN_POINT('',(139.5,-88.125,-3.5E-02)); +#427600 = CIRCLE('',#427601,0.125); +#427601 = AXIS2_PLACEMENT_3D('',#427602,#427603,#427604); +#427602 = CARTESIAN_POINT('',(139.5,-88.,-3.5E-02)); +#427603 = DIRECTION('',(-0.,0.,-1.)); +#427604 = DIRECTION('',(-0.,-1.,0.)); +#427605 = PLANE('',#427606); +#427606 = AXIS2_PLACEMENT_3D('',#427607,#427608,#427609); +#427607 = CARTESIAN_POINT('',(139.5,-88.15,-3.5E-02)); +#427608 = DIRECTION('',(0.,0.,1.)); +#427609 = DIRECTION('',(1.,0.,-0.)); +#427610 = ADVANCED_FACE('',(#427611,#427614),#427625,.T.); +#427611 = FACE_BOUND('',#427612,.T.); +#427612 = EDGE_LOOP('',(#427613)); +#427613 = ORIENTED_EDGE('',*,*,#427571,.T.); +#427614 = FACE_BOUND('',#427615,.T.); +#427615 = EDGE_LOOP('',(#427616)); +#427616 = ORIENTED_EDGE('',*,*,#427617,.T.); +#427617 = EDGE_CURVE('',#427618,#427618,#427620,.T.); +#427618 = VERTEX_POINT('',#427619); +#427619 = CARTESIAN_POINT('',(139.5,-88.125,1.545)); +#427620 = CIRCLE('',#427621,0.125); +#427621 = AXIS2_PLACEMENT_3D('',#427622,#427623,#427624); +#427622 = CARTESIAN_POINT('',(139.5,-88.,1.545)); +#427623 = DIRECTION('',(-0.,0.,-1.)); +#427624 = DIRECTION('',(-0.,-1.,0.)); +#427625 = PLANE('',#427626); +#427626 = AXIS2_PLACEMENT_3D('',#427627,#427628,#427629); +#427627 = CARTESIAN_POINT('',(139.5,-88.15,1.545)); +#427628 = DIRECTION('',(0.,0.,1.)); +#427629 = DIRECTION('',(1.,0.,-0.)); +#427630 = ADVANCED_FACE('',(#427631),#427642,.F.); +#427631 = FACE_BOUND('',#427632,.T.); +#427632 = EDGE_LOOP('',(#427633,#427634,#427640,#427641)); +#427633 = ORIENTED_EDGE('',*,*,#427597,.T.); +#427634 = ORIENTED_EDGE('',*,*,#427635,.T.); +#427635 = EDGE_CURVE('',#427598,#427618,#427636,.T.); +#427636 = LINE('',#427637,#427638); +#427637 = CARTESIAN_POINT('',(139.5,-88.125,-3.6E-02)); +#427638 = VECTOR('',#427639,1.); +#427639 = DIRECTION('',(0.,0.,1.)); +#427640 = ORIENTED_EDGE('',*,*,#427617,.F.); +#427641 = ORIENTED_EDGE('',*,*,#427635,.F.); +#427642 = CYLINDRICAL_SURFACE('',#427643,0.125); +#427643 = AXIS2_PLACEMENT_3D('',#427644,#427645,#427646); +#427644 = CARTESIAN_POINT('',(139.5,-88.,-3.6E-02)); +#427645 = DIRECTION('',(-0.,-0.,-1.)); +#427646 = DIRECTION('',(-0.,-1.,0.)); +#427647 = MANIFOLD_SOLID_BREP('',#427648); +#427648 = CLOSED_SHELL('',(#427649,#427682,#427702,#427722)); +#427649 = ADVANCED_FACE('',(#427650),#427677,.T.); +#427650 = FACE_BOUND('',#427651,.F.); +#427651 = EDGE_LOOP('',(#427652,#427662,#427669,#427670)); +#427652 = ORIENTED_EDGE('',*,*,#427653,.T.); +#427653 = EDGE_CURVE('',#427654,#427656,#427658,.T.); +#427654 = VERTEX_POINT('',#427655); +#427655 = CARTESIAN_POINT('',(145.,-123.65,-3.5E-02)); +#427656 = VERTEX_POINT('',#427657); +#427657 = CARTESIAN_POINT('',(145.,-123.65,1.545)); +#427658 = LINE('',#427659,#427660); +#427659 = CARTESIAN_POINT('',(145.,-123.65,-3.5E-02)); +#427660 = VECTOR('',#427661,1.); +#427661 = DIRECTION('',(0.,0.,1.)); +#427662 = ORIENTED_EDGE('',*,*,#427663,.T.); +#427663 = EDGE_CURVE('',#427656,#427656,#427664,.T.); +#427664 = CIRCLE('',#427665,0.15); +#427665 = AXIS2_PLACEMENT_3D('',#427666,#427667,#427668); +#427666 = CARTESIAN_POINT('',(145.,-123.5,1.545)); +#427667 = DIRECTION('',(0.,0.,1.)); +#427668 = DIRECTION('',(-0.,-1.,0.)); +#427669 = ORIENTED_EDGE('',*,*,#427653,.F.); +#427670 = ORIENTED_EDGE('',*,*,#427671,.F.); +#427671 = EDGE_CURVE('',#427654,#427654,#427672,.T.); +#427672 = CIRCLE('',#427673,0.15); +#427673 = AXIS2_PLACEMENT_3D('',#427674,#427675,#427676); +#427674 = CARTESIAN_POINT('',(145.,-123.5,-3.5E-02)); +#427675 = DIRECTION('',(0.,0.,1.)); +#427676 = DIRECTION('',(-0.,-1.,0.)); +#427677 = CYLINDRICAL_SURFACE('',#427678,0.15); +#427678 = AXIS2_PLACEMENT_3D('',#427679,#427680,#427681); +#427679 = CARTESIAN_POINT('',(145.,-123.5,-3.5E-02)); +#427680 = DIRECTION('',(-0.,-0.,-1.)); +#427681 = DIRECTION('',(-0.,-1.,0.)); +#427682 = ADVANCED_FACE('',(#427683,#427686),#427697,.F.); +#427683 = FACE_BOUND('',#427684,.F.); +#427684 = EDGE_LOOP('',(#427685)); +#427685 = ORIENTED_EDGE('',*,*,#427671,.T.); +#427686 = FACE_BOUND('',#427687,.F.); +#427687 = EDGE_LOOP('',(#427688)); +#427688 = ORIENTED_EDGE('',*,*,#427689,.T.); +#427689 = EDGE_CURVE('',#427690,#427690,#427692,.T.); +#427690 = VERTEX_POINT('',#427691); +#427691 = CARTESIAN_POINT('',(145.,-123.625,-3.5E-02)); +#427692 = CIRCLE('',#427693,0.125); +#427693 = AXIS2_PLACEMENT_3D('',#427694,#427695,#427696); +#427694 = CARTESIAN_POINT('',(145.,-123.5,-3.5E-02)); +#427695 = DIRECTION('',(-0.,0.,-1.)); +#427696 = DIRECTION('',(-0.,-1.,0.)); +#427697 = PLANE('',#427698); +#427698 = AXIS2_PLACEMENT_3D('',#427699,#427700,#427701); +#427699 = CARTESIAN_POINT('',(145.,-123.65,-3.5E-02)); +#427700 = DIRECTION('',(0.,0.,1.)); +#427701 = DIRECTION('',(1.,0.,-0.)); +#427702 = ADVANCED_FACE('',(#427703,#427706),#427717,.T.); +#427703 = FACE_BOUND('',#427704,.T.); +#427704 = EDGE_LOOP('',(#427705)); +#427705 = ORIENTED_EDGE('',*,*,#427663,.T.); +#427706 = FACE_BOUND('',#427707,.T.); +#427707 = EDGE_LOOP('',(#427708)); +#427708 = ORIENTED_EDGE('',*,*,#427709,.T.); +#427709 = EDGE_CURVE('',#427710,#427710,#427712,.T.); +#427710 = VERTEX_POINT('',#427711); +#427711 = CARTESIAN_POINT('',(145.,-123.625,1.545)); +#427712 = CIRCLE('',#427713,0.125); +#427713 = AXIS2_PLACEMENT_3D('',#427714,#427715,#427716); +#427714 = CARTESIAN_POINT('',(145.,-123.5,1.545)); +#427715 = DIRECTION('',(-0.,0.,-1.)); +#427716 = DIRECTION('',(-0.,-1.,0.)); +#427717 = PLANE('',#427718); +#427718 = AXIS2_PLACEMENT_3D('',#427719,#427720,#427721); +#427719 = CARTESIAN_POINT('',(145.,-123.65,1.545)); +#427720 = DIRECTION('',(0.,0.,1.)); +#427721 = DIRECTION('',(1.,0.,-0.)); +#427722 = ADVANCED_FACE('',(#427723),#427734,.F.); +#427723 = FACE_BOUND('',#427724,.T.); +#427724 = EDGE_LOOP('',(#427725,#427726,#427732,#427733)); +#427725 = ORIENTED_EDGE('',*,*,#427689,.T.); +#427726 = ORIENTED_EDGE('',*,*,#427727,.T.); +#427727 = EDGE_CURVE('',#427690,#427710,#427728,.T.); +#427728 = LINE('',#427729,#427730); +#427729 = CARTESIAN_POINT('',(145.,-123.625,-3.6E-02)); +#427730 = VECTOR('',#427731,1.); +#427731 = DIRECTION('',(0.,0.,1.)); +#427732 = ORIENTED_EDGE('',*,*,#427709,.F.); +#427733 = ORIENTED_EDGE('',*,*,#427727,.F.); +#427734 = CYLINDRICAL_SURFACE('',#427735,0.125); +#427735 = AXIS2_PLACEMENT_3D('',#427736,#427737,#427738); +#427736 = CARTESIAN_POINT('',(145.,-123.5,-3.6E-02)); +#427737 = DIRECTION('',(-0.,-0.,-1.)); +#427738 = DIRECTION('',(-0.,-1.,0.)); +#427739 = MANIFOLD_SOLID_BREP('',#427740); +#427740 = CLOSED_SHELL('',(#427741,#427774,#427794,#427814)); +#427741 = ADVANCED_FACE('',(#427742),#427769,.T.); +#427742 = FACE_BOUND('',#427743,.F.); +#427743 = EDGE_LOOP('',(#427744,#427754,#427761,#427762)); +#427744 = ORIENTED_EDGE('',*,*,#427745,.T.); +#427745 = EDGE_CURVE('',#427746,#427748,#427750,.T.); +#427746 = VERTEX_POINT('',#427747); +#427747 = CARTESIAN_POINT('',(145.25,-65.25,-3.5E-02)); +#427748 = VERTEX_POINT('',#427749); +#427749 = CARTESIAN_POINT('',(145.25,-65.25,1.545)); +#427750 = LINE('',#427751,#427752); +#427751 = CARTESIAN_POINT('',(145.25,-65.25,-3.5E-02)); +#427752 = VECTOR('',#427753,1.); +#427753 = DIRECTION('',(0.,0.,1.)); +#427754 = ORIENTED_EDGE('',*,*,#427755,.T.); +#427755 = EDGE_CURVE('',#427748,#427748,#427756,.T.); +#427756 = CIRCLE('',#427757,0.15); +#427757 = AXIS2_PLACEMENT_3D('',#427758,#427759,#427760); +#427758 = CARTESIAN_POINT('',(145.25,-65.1,1.545)); +#427759 = DIRECTION('',(0.,0.,1.)); +#427760 = DIRECTION('',(-0.,-1.,0.)); +#427761 = ORIENTED_EDGE('',*,*,#427745,.F.); +#427762 = ORIENTED_EDGE('',*,*,#427763,.F.); +#427763 = EDGE_CURVE('',#427746,#427746,#427764,.T.); +#427764 = CIRCLE('',#427765,0.15); +#427765 = AXIS2_PLACEMENT_3D('',#427766,#427767,#427768); +#427766 = CARTESIAN_POINT('',(145.25,-65.1,-3.5E-02)); +#427767 = DIRECTION('',(0.,0.,1.)); +#427768 = DIRECTION('',(-0.,-1.,0.)); +#427769 = CYLINDRICAL_SURFACE('',#427770,0.15); +#427770 = AXIS2_PLACEMENT_3D('',#427771,#427772,#427773); +#427771 = CARTESIAN_POINT('',(145.25,-65.1,-3.5E-02)); +#427772 = DIRECTION('',(-0.,-0.,-1.)); +#427773 = DIRECTION('',(-0.,-1.,0.)); +#427774 = ADVANCED_FACE('',(#427775,#427778),#427789,.F.); +#427775 = FACE_BOUND('',#427776,.F.); +#427776 = EDGE_LOOP('',(#427777)); +#427777 = ORIENTED_EDGE('',*,*,#427763,.T.); +#427778 = FACE_BOUND('',#427779,.F.); +#427779 = EDGE_LOOP('',(#427780)); +#427780 = ORIENTED_EDGE('',*,*,#427781,.T.); +#427781 = EDGE_CURVE('',#427782,#427782,#427784,.T.); +#427782 = VERTEX_POINT('',#427783); +#427783 = CARTESIAN_POINT('',(145.25,-65.225,-3.5E-02)); +#427784 = CIRCLE('',#427785,0.125); +#427785 = AXIS2_PLACEMENT_3D('',#427786,#427787,#427788); +#427786 = CARTESIAN_POINT('',(145.25,-65.1,-3.5E-02)); +#427787 = DIRECTION('',(-0.,0.,-1.)); +#427788 = DIRECTION('',(-0.,-1.,0.)); +#427789 = PLANE('',#427790); +#427790 = AXIS2_PLACEMENT_3D('',#427791,#427792,#427793); +#427791 = CARTESIAN_POINT('',(145.25,-65.25,-3.5E-02)); +#427792 = DIRECTION('',(0.,0.,1.)); +#427793 = DIRECTION('',(1.,0.,-0.)); +#427794 = ADVANCED_FACE('',(#427795,#427798),#427809,.T.); +#427795 = FACE_BOUND('',#427796,.T.); +#427796 = EDGE_LOOP('',(#427797)); +#427797 = ORIENTED_EDGE('',*,*,#427755,.T.); +#427798 = FACE_BOUND('',#427799,.T.); +#427799 = EDGE_LOOP('',(#427800)); +#427800 = ORIENTED_EDGE('',*,*,#427801,.T.); +#427801 = EDGE_CURVE('',#427802,#427802,#427804,.T.); +#427802 = VERTEX_POINT('',#427803); +#427803 = CARTESIAN_POINT('',(145.25,-65.225,1.545)); +#427804 = CIRCLE('',#427805,0.125); +#427805 = AXIS2_PLACEMENT_3D('',#427806,#427807,#427808); +#427806 = CARTESIAN_POINT('',(145.25,-65.1,1.545)); +#427807 = DIRECTION('',(-0.,0.,-1.)); +#427808 = DIRECTION('',(-0.,-1.,0.)); +#427809 = PLANE('',#427810); +#427810 = AXIS2_PLACEMENT_3D('',#427811,#427812,#427813); +#427811 = CARTESIAN_POINT('',(145.25,-65.25,1.545)); +#427812 = DIRECTION('',(0.,0.,1.)); +#427813 = DIRECTION('',(1.,0.,-0.)); +#427814 = ADVANCED_FACE('',(#427815),#427826,.F.); +#427815 = FACE_BOUND('',#427816,.T.); +#427816 = EDGE_LOOP('',(#427817,#427818,#427824,#427825)); +#427817 = ORIENTED_EDGE('',*,*,#427781,.T.); +#427818 = ORIENTED_EDGE('',*,*,#427819,.T.); +#427819 = EDGE_CURVE('',#427782,#427802,#427820,.T.); +#427820 = LINE('',#427821,#427822); +#427821 = CARTESIAN_POINT('',(145.25,-65.225,-3.6E-02)); +#427822 = VECTOR('',#427823,1.); +#427823 = DIRECTION('',(0.,0.,1.)); +#427824 = ORIENTED_EDGE('',*,*,#427801,.F.); +#427825 = ORIENTED_EDGE('',*,*,#427819,.F.); +#427826 = CYLINDRICAL_SURFACE('',#427827,0.125); +#427827 = AXIS2_PLACEMENT_3D('',#427828,#427829,#427830); +#427828 = CARTESIAN_POINT('',(145.25,-65.1,-3.6E-02)); +#427829 = DIRECTION('',(-0.,-0.,-1.)); +#427830 = DIRECTION('',(-0.,-1.,0.)); +#427831 = MANIFOLD_SOLID_BREP('',#427832); +#427832 = CLOSED_SHELL('',(#427833,#427866,#427886,#427906)); +#427833 = ADVANCED_FACE('',(#427834),#427861,.T.); +#427834 = FACE_BOUND('',#427835,.F.); +#427835 = EDGE_LOOP('',(#427836,#427846,#427853,#427854)); +#427836 = ORIENTED_EDGE('',*,*,#427837,.T.); +#427837 = EDGE_CURVE('',#427838,#427840,#427842,.T.); +#427838 = VERTEX_POINT('',#427839); +#427839 = CARTESIAN_POINT('',(123.5,-124.15,-3.5E-02)); +#427840 = VERTEX_POINT('',#427841); +#427841 = CARTESIAN_POINT('',(123.5,-124.15,1.545)); +#427842 = LINE('',#427843,#427844); +#427843 = CARTESIAN_POINT('',(123.5,-124.15,-3.5E-02)); +#427844 = VECTOR('',#427845,1.); +#427845 = DIRECTION('',(0.,0.,1.)); +#427846 = ORIENTED_EDGE('',*,*,#427847,.T.); +#427847 = EDGE_CURVE('',#427840,#427840,#427848,.T.); +#427848 = CIRCLE('',#427849,0.15); +#427849 = AXIS2_PLACEMENT_3D('',#427850,#427851,#427852); +#427850 = CARTESIAN_POINT('',(123.5,-124.,1.545)); +#427851 = DIRECTION('',(0.,0.,1.)); +#427852 = DIRECTION('',(-0.,-1.,0.)); +#427853 = ORIENTED_EDGE('',*,*,#427837,.F.); +#427854 = ORIENTED_EDGE('',*,*,#427855,.F.); +#427855 = EDGE_CURVE('',#427838,#427838,#427856,.T.); +#427856 = CIRCLE('',#427857,0.15); +#427857 = AXIS2_PLACEMENT_3D('',#427858,#427859,#427860); +#427858 = CARTESIAN_POINT('',(123.5,-124.,-3.5E-02)); +#427859 = DIRECTION('',(0.,0.,1.)); +#427860 = DIRECTION('',(-0.,-1.,0.)); +#427861 = CYLINDRICAL_SURFACE('',#427862,0.15); +#427862 = AXIS2_PLACEMENT_3D('',#427863,#427864,#427865); +#427863 = CARTESIAN_POINT('',(123.5,-124.,-3.5E-02)); +#427864 = DIRECTION('',(-0.,-0.,-1.)); +#427865 = DIRECTION('',(-0.,-1.,0.)); +#427866 = ADVANCED_FACE('',(#427867,#427870),#427881,.F.); +#427867 = FACE_BOUND('',#427868,.F.); +#427868 = EDGE_LOOP('',(#427869)); +#427869 = ORIENTED_EDGE('',*,*,#427855,.T.); +#427870 = FACE_BOUND('',#427871,.F.); +#427871 = EDGE_LOOP('',(#427872)); +#427872 = ORIENTED_EDGE('',*,*,#427873,.T.); +#427873 = EDGE_CURVE('',#427874,#427874,#427876,.T.); +#427874 = VERTEX_POINT('',#427875); +#427875 = CARTESIAN_POINT('',(123.5,-124.125,-3.5E-02)); +#427876 = CIRCLE('',#427877,0.125); +#427877 = AXIS2_PLACEMENT_3D('',#427878,#427879,#427880); +#427878 = CARTESIAN_POINT('',(123.5,-124.,-3.5E-02)); +#427879 = DIRECTION('',(-0.,0.,-1.)); +#427880 = DIRECTION('',(-0.,-1.,0.)); +#427881 = PLANE('',#427882); +#427882 = AXIS2_PLACEMENT_3D('',#427883,#427884,#427885); +#427883 = CARTESIAN_POINT('',(123.5,-124.15,-3.5E-02)); +#427884 = DIRECTION('',(0.,0.,1.)); +#427885 = DIRECTION('',(1.,0.,-0.)); +#427886 = ADVANCED_FACE('',(#427887,#427890),#427901,.T.); +#427887 = FACE_BOUND('',#427888,.T.); +#427888 = EDGE_LOOP('',(#427889)); +#427889 = ORIENTED_EDGE('',*,*,#427847,.T.); +#427890 = FACE_BOUND('',#427891,.T.); +#427891 = EDGE_LOOP('',(#427892)); +#427892 = ORIENTED_EDGE('',*,*,#427893,.T.); +#427893 = EDGE_CURVE('',#427894,#427894,#427896,.T.); +#427894 = VERTEX_POINT('',#427895); +#427895 = CARTESIAN_POINT('',(123.5,-124.125,1.545)); +#427896 = CIRCLE('',#427897,0.125); +#427897 = AXIS2_PLACEMENT_3D('',#427898,#427899,#427900); +#427898 = CARTESIAN_POINT('',(123.5,-124.,1.545)); +#427899 = DIRECTION('',(-0.,0.,-1.)); +#427900 = DIRECTION('',(-0.,-1.,0.)); +#427901 = PLANE('',#427902); +#427902 = AXIS2_PLACEMENT_3D('',#427903,#427904,#427905); +#427903 = CARTESIAN_POINT('',(123.5,-124.15,1.545)); +#427904 = DIRECTION('',(0.,0.,1.)); +#427905 = DIRECTION('',(1.,0.,-0.)); +#427906 = ADVANCED_FACE('',(#427907),#427918,.F.); +#427907 = FACE_BOUND('',#427908,.T.); +#427908 = EDGE_LOOP('',(#427909,#427910,#427916,#427917)); +#427909 = ORIENTED_EDGE('',*,*,#427873,.T.); +#427910 = ORIENTED_EDGE('',*,*,#427911,.T.); +#427911 = EDGE_CURVE('',#427874,#427894,#427912,.T.); +#427912 = LINE('',#427913,#427914); +#427913 = CARTESIAN_POINT('',(123.5,-124.125,-3.6E-02)); +#427914 = VECTOR('',#427915,1.); +#427915 = DIRECTION('',(0.,0.,1.)); +#427916 = ORIENTED_EDGE('',*,*,#427893,.F.); +#427917 = ORIENTED_EDGE('',*,*,#427911,.F.); +#427918 = CYLINDRICAL_SURFACE('',#427919,0.125); +#427919 = AXIS2_PLACEMENT_3D('',#427920,#427921,#427922); +#427920 = CARTESIAN_POINT('',(123.5,-124.,-3.6E-02)); +#427921 = DIRECTION('',(-0.,-0.,-1.)); +#427922 = DIRECTION('',(-0.,-1.,0.)); +#427923 = MANIFOLD_SOLID_BREP('',#427924); +#427924 = CLOSED_SHELL('',(#427925,#427958,#427978,#427998)); +#427925 = ADVANCED_FACE('',(#427926),#427953,.T.); +#427926 = FACE_BOUND('',#427927,.F.); +#427927 = EDGE_LOOP('',(#427928,#427938,#427945,#427946)); +#427928 = ORIENTED_EDGE('',*,*,#427929,.T.); +#427929 = EDGE_CURVE('',#427930,#427932,#427934,.T.); +#427930 = VERTEX_POINT('',#427931); +#427931 = CARTESIAN_POINT('',(123.5,-115.65,-3.5E-02)); +#427932 = VERTEX_POINT('',#427933); +#427933 = CARTESIAN_POINT('',(123.5,-115.65,1.545)); +#427934 = LINE('',#427935,#427936); +#427935 = CARTESIAN_POINT('',(123.5,-115.65,-3.5E-02)); +#427936 = VECTOR('',#427937,1.); +#427937 = DIRECTION('',(0.,0.,1.)); +#427938 = ORIENTED_EDGE('',*,*,#427939,.T.); +#427939 = EDGE_CURVE('',#427932,#427932,#427940,.T.); +#427940 = CIRCLE('',#427941,0.15); +#427941 = AXIS2_PLACEMENT_3D('',#427942,#427943,#427944); +#427942 = CARTESIAN_POINT('',(123.5,-115.5,1.545)); +#427943 = DIRECTION('',(0.,0.,1.)); +#427944 = DIRECTION('',(-0.,-1.,0.)); +#427945 = ORIENTED_EDGE('',*,*,#427929,.F.); +#427946 = ORIENTED_EDGE('',*,*,#427947,.F.); +#427947 = EDGE_CURVE('',#427930,#427930,#427948,.T.); +#427948 = CIRCLE('',#427949,0.15); +#427949 = AXIS2_PLACEMENT_3D('',#427950,#427951,#427952); +#427950 = CARTESIAN_POINT('',(123.5,-115.5,-3.5E-02)); +#427951 = DIRECTION('',(0.,0.,1.)); +#427952 = DIRECTION('',(-0.,-1.,0.)); +#427953 = CYLINDRICAL_SURFACE('',#427954,0.15); +#427954 = AXIS2_PLACEMENT_3D('',#427955,#427956,#427957); +#427955 = CARTESIAN_POINT('',(123.5,-115.5,-3.5E-02)); +#427956 = DIRECTION('',(-0.,-0.,-1.)); +#427957 = DIRECTION('',(-0.,-1.,0.)); +#427958 = ADVANCED_FACE('',(#427959,#427962),#427973,.F.); +#427959 = FACE_BOUND('',#427960,.F.); +#427960 = EDGE_LOOP('',(#427961)); +#427961 = ORIENTED_EDGE('',*,*,#427947,.T.); +#427962 = FACE_BOUND('',#427963,.F.); +#427963 = EDGE_LOOP('',(#427964)); +#427964 = ORIENTED_EDGE('',*,*,#427965,.T.); +#427965 = EDGE_CURVE('',#427966,#427966,#427968,.T.); +#427966 = VERTEX_POINT('',#427967); +#427967 = CARTESIAN_POINT('',(123.5,-115.625,-3.5E-02)); +#427968 = CIRCLE('',#427969,0.125); +#427969 = AXIS2_PLACEMENT_3D('',#427970,#427971,#427972); +#427970 = CARTESIAN_POINT('',(123.5,-115.5,-3.5E-02)); +#427971 = DIRECTION('',(-0.,0.,-1.)); +#427972 = DIRECTION('',(-0.,-1.,0.)); +#427973 = PLANE('',#427974); +#427974 = AXIS2_PLACEMENT_3D('',#427975,#427976,#427977); +#427975 = CARTESIAN_POINT('',(123.5,-115.65,-3.5E-02)); +#427976 = DIRECTION('',(0.,0.,1.)); +#427977 = DIRECTION('',(1.,0.,-0.)); +#427978 = ADVANCED_FACE('',(#427979,#427982),#427993,.T.); +#427979 = FACE_BOUND('',#427980,.T.); +#427980 = EDGE_LOOP('',(#427981)); +#427981 = ORIENTED_EDGE('',*,*,#427939,.T.); +#427982 = FACE_BOUND('',#427983,.T.); +#427983 = EDGE_LOOP('',(#427984)); +#427984 = ORIENTED_EDGE('',*,*,#427985,.T.); +#427985 = EDGE_CURVE('',#427986,#427986,#427988,.T.); +#427986 = VERTEX_POINT('',#427987); +#427987 = CARTESIAN_POINT('',(123.5,-115.625,1.545)); +#427988 = CIRCLE('',#427989,0.125); +#427989 = AXIS2_PLACEMENT_3D('',#427990,#427991,#427992); +#427990 = CARTESIAN_POINT('',(123.5,-115.5,1.545)); +#427991 = DIRECTION('',(-0.,0.,-1.)); +#427992 = DIRECTION('',(-0.,-1.,0.)); +#427993 = PLANE('',#427994); +#427994 = AXIS2_PLACEMENT_3D('',#427995,#427996,#427997); +#427995 = CARTESIAN_POINT('',(123.5,-115.65,1.545)); +#427996 = DIRECTION('',(0.,0.,1.)); +#427997 = DIRECTION('',(1.,0.,-0.)); +#427998 = ADVANCED_FACE('',(#427999),#428010,.F.); +#427999 = FACE_BOUND('',#428000,.T.); +#428000 = EDGE_LOOP('',(#428001,#428002,#428008,#428009)); +#428001 = ORIENTED_EDGE('',*,*,#427965,.T.); +#428002 = ORIENTED_EDGE('',*,*,#428003,.T.); +#428003 = EDGE_CURVE('',#427966,#427986,#428004,.T.); +#428004 = LINE('',#428005,#428006); +#428005 = CARTESIAN_POINT('',(123.5,-115.625,-3.6E-02)); +#428006 = VECTOR('',#428007,1.); +#428007 = DIRECTION('',(0.,0.,1.)); +#428008 = ORIENTED_EDGE('',*,*,#427985,.F.); +#428009 = ORIENTED_EDGE('',*,*,#428003,.F.); +#428010 = CYLINDRICAL_SURFACE('',#428011,0.125); +#428011 = AXIS2_PLACEMENT_3D('',#428012,#428013,#428014); +#428012 = CARTESIAN_POINT('',(123.5,-115.5,-3.6E-02)); +#428013 = DIRECTION('',(-0.,-0.,-1.)); +#428014 = DIRECTION('',(-0.,-1.,0.)); +#428015 = MANIFOLD_SOLID_BREP('',#428016); +#428016 = CLOSED_SHELL('',(#428017,#428050,#428070,#428090)); +#428017 = ADVANCED_FACE('',(#428018),#428045,.T.); +#428018 = FACE_BOUND('',#428019,.F.); +#428019 = EDGE_LOOP('',(#428020,#428030,#428037,#428038)); +#428020 = ORIENTED_EDGE('',*,*,#428021,.T.); +#428021 = EDGE_CURVE('',#428022,#428024,#428026,.T.); +#428022 = VERTEX_POINT('',#428023); +#428023 = CARTESIAN_POINT('',(140.7,-71.95,-3.5E-02)); +#428024 = VERTEX_POINT('',#428025); +#428025 = CARTESIAN_POINT('',(140.7,-71.95,1.545)); +#428026 = LINE('',#428027,#428028); +#428027 = CARTESIAN_POINT('',(140.7,-71.95,-3.5E-02)); +#428028 = VECTOR('',#428029,1.); +#428029 = DIRECTION('',(0.,0.,1.)); +#428030 = ORIENTED_EDGE('',*,*,#428031,.T.); +#428031 = EDGE_CURVE('',#428024,#428024,#428032,.T.); +#428032 = CIRCLE('',#428033,0.15); +#428033 = AXIS2_PLACEMENT_3D('',#428034,#428035,#428036); +#428034 = CARTESIAN_POINT('',(140.7,-71.8,1.545)); +#428035 = DIRECTION('',(0.,0.,1.)); +#428036 = DIRECTION('',(-0.,-1.,0.)); +#428037 = ORIENTED_EDGE('',*,*,#428021,.F.); +#428038 = ORIENTED_EDGE('',*,*,#428039,.F.); +#428039 = EDGE_CURVE('',#428022,#428022,#428040,.T.); +#428040 = CIRCLE('',#428041,0.15); +#428041 = AXIS2_PLACEMENT_3D('',#428042,#428043,#428044); +#428042 = CARTESIAN_POINT('',(140.7,-71.8,-3.5E-02)); +#428043 = DIRECTION('',(0.,0.,1.)); +#428044 = DIRECTION('',(-0.,-1.,0.)); +#428045 = CYLINDRICAL_SURFACE('',#428046,0.15); +#428046 = AXIS2_PLACEMENT_3D('',#428047,#428048,#428049); +#428047 = CARTESIAN_POINT('',(140.7,-71.8,-3.5E-02)); +#428048 = DIRECTION('',(-0.,-0.,-1.)); +#428049 = DIRECTION('',(-0.,-1.,0.)); +#428050 = ADVANCED_FACE('',(#428051,#428054),#428065,.F.); +#428051 = FACE_BOUND('',#428052,.F.); +#428052 = EDGE_LOOP('',(#428053)); +#428053 = ORIENTED_EDGE('',*,*,#428039,.T.); +#428054 = FACE_BOUND('',#428055,.F.); +#428055 = EDGE_LOOP('',(#428056)); +#428056 = ORIENTED_EDGE('',*,*,#428057,.T.); +#428057 = EDGE_CURVE('',#428058,#428058,#428060,.T.); +#428058 = VERTEX_POINT('',#428059); +#428059 = CARTESIAN_POINT('',(140.7,-71.925,-3.5E-02)); +#428060 = CIRCLE('',#428061,0.125); +#428061 = AXIS2_PLACEMENT_3D('',#428062,#428063,#428064); +#428062 = CARTESIAN_POINT('',(140.7,-71.8,-3.5E-02)); +#428063 = DIRECTION('',(-0.,0.,-1.)); +#428064 = DIRECTION('',(-0.,-1.,0.)); +#428065 = PLANE('',#428066); +#428066 = AXIS2_PLACEMENT_3D('',#428067,#428068,#428069); +#428067 = CARTESIAN_POINT('',(140.7,-71.95,-3.5E-02)); +#428068 = DIRECTION('',(0.,0.,1.)); +#428069 = DIRECTION('',(1.,0.,-0.)); +#428070 = ADVANCED_FACE('',(#428071,#428074),#428085,.T.); +#428071 = FACE_BOUND('',#428072,.T.); +#428072 = EDGE_LOOP('',(#428073)); +#428073 = ORIENTED_EDGE('',*,*,#428031,.T.); +#428074 = FACE_BOUND('',#428075,.T.); +#428075 = EDGE_LOOP('',(#428076)); +#428076 = ORIENTED_EDGE('',*,*,#428077,.T.); +#428077 = EDGE_CURVE('',#428078,#428078,#428080,.T.); +#428078 = VERTEX_POINT('',#428079); +#428079 = CARTESIAN_POINT('',(140.7,-71.925,1.545)); +#428080 = CIRCLE('',#428081,0.125); +#428081 = AXIS2_PLACEMENT_3D('',#428082,#428083,#428084); +#428082 = CARTESIAN_POINT('',(140.7,-71.8,1.545)); +#428083 = DIRECTION('',(-0.,0.,-1.)); +#428084 = DIRECTION('',(-0.,-1.,0.)); +#428085 = PLANE('',#428086); +#428086 = AXIS2_PLACEMENT_3D('',#428087,#428088,#428089); +#428087 = CARTESIAN_POINT('',(140.7,-71.95,1.545)); +#428088 = DIRECTION('',(0.,0.,1.)); +#428089 = DIRECTION('',(1.,0.,-0.)); +#428090 = ADVANCED_FACE('',(#428091),#428102,.F.); +#428091 = FACE_BOUND('',#428092,.T.); +#428092 = EDGE_LOOP('',(#428093,#428094,#428100,#428101)); +#428093 = ORIENTED_EDGE('',*,*,#428057,.T.); +#428094 = ORIENTED_EDGE('',*,*,#428095,.T.); +#428095 = EDGE_CURVE('',#428058,#428078,#428096,.T.); +#428096 = LINE('',#428097,#428098); +#428097 = CARTESIAN_POINT('',(140.7,-71.925,-3.6E-02)); +#428098 = VECTOR('',#428099,1.); +#428099 = DIRECTION('',(0.,0.,1.)); +#428100 = ORIENTED_EDGE('',*,*,#428077,.F.); +#428101 = ORIENTED_EDGE('',*,*,#428095,.F.); +#428102 = CYLINDRICAL_SURFACE('',#428103,0.125); +#428103 = AXIS2_PLACEMENT_3D('',#428104,#428105,#428106); +#428104 = CARTESIAN_POINT('',(140.7,-71.8,-3.6E-02)); +#428105 = DIRECTION('',(-0.,-0.,-1.)); +#428106 = DIRECTION('',(-0.,-1.,0.)); +#428107 = MANIFOLD_SOLID_BREP('',#428108); +#428108 = CLOSED_SHELL('',(#428109,#428142,#428162,#428182)); +#428109 = ADVANCED_FACE('',(#428110),#428137,.T.); +#428110 = FACE_BOUND('',#428111,.F.); +#428111 = EDGE_LOOP('',(#428112,#428122,#428129,#428130)); +#428112 = ORIENTED_EDGE('',*,*,#428113,.T.); +#428113 = EDGE_CURVE('',#428114,#428116,#428118,.T.); +#428114 = VERTEX_POINT('',#428115); +#428115 = CARTESIAN_POINT('',(152.5,-121.4,-3.5E-02)); +#428116 = VERTEX_POINT('',#428117); +#428117 = CARTESIAN_POINT('',(152.5,-121.4,1.545)); +#428118 = LINE('',#428119,#428120); +#428119 = CARTESIAN_POINT('',(152.5,-121.4,-3.5E-02)); +#428120 = VECTOR('',#428121,1.); +#428121 = DIRECTION('',(0.,0.,1.)); +#428122 = ORIENTED_EDGE('',*,*,#428123,.T.); +#428123 = EDGE_CURVE('',#428116,#428116,#428124,.T.); +#428124 = CIRCLE('',#428125,0.15); +#428125 = AXIS2_PLACEMENT_3D('',#428126,#428127,#428128); +#428126 = CARTESIAN_POINT('',(152.5,-121.25,1.545)); +#428127 = DIRECTION('',(0.,0.,1.)); +#428128 = DIRECTION('',(-0.,-1.,0.)); +#428129 = ORIENTED_EDGE('',*,*,#428113,.F.); +#428130 = ORIENTED_EDGE('',*,*,#428131,.F.); +#428131 = EDGE_CURVE('',#428114,#428114,#428132,.T.); +#428132 = CIRCLE('',#428133,0.15); +#428133 = AXIS2_PLACEMENT_3D('',#428134,#428135,#428136); +#428134 = CARTESIAN_POINT('',(152.5,-121.25,-3.5E-02)); +#428135 = DIRECTION('',(0.,0.,1.)); +#428136 = DIRECTION('',(-0.,-1.,0.)); +#428137 = CYLINDRICAL_SURFACE('',#428138,0.15); +#428138 = AXIS2_PLACEMENT_3D('',#428139,#428140,#428141); +#428139 = CARTESIAN_POINT('',(152.5,-121.25,-3.5E-02)); +#428140 = DIRECTION('',(-0.,-0.,-1.)); +#428141 = DIRECTION('',(-0.,-1.,0.)); +#428142 = ADVANCED_FACE('',(#428143,#428146),#428157,.F.); +#428143 = FACE_BOUND('',#428144,.F.); +#428144 = EDGE_LOOP('',(#428145)); +#428145 = ORIENTED_EDGE('',*,*,#428131,.T.); +#428146 = FACE_BOUND('',#428147,.F.); +#428147 = EDGE_LOOP('',(#428148)); +#428148 = ORIENTED_EDGE('',*,*,#428149,.T.); +#428149 = EDGE_CURVE('',#428150,#428150,#428152,.T.); +#428150 = VERTEX_POINT('',#428151); +#428151 = CARTESIAN_POINT('',(152.5,-121.375,-3.5E-02)); +#428152 = CIRCLE('',#428153,0.125); +#428153 = AXIS2_PLACEMENT_3D('',#428154,#428155,#428156); +#428154 = CARTESIAN_POINT('',(152.5,-121.25,-3.5E-02)); +#428155 = DIRECTION('',(-0.,0.,-1.)); +#428156 = DIRECTION('',(-0.,-1.,0.)); +#428157 = PLANE('',#428158); +#428158 = AXIS2_PLACEMENT_3D('',#428159,#428160,#428161); +#428159 = CARTESIAN_POINT('',(152.5,-121.4,-3.5E-02)); +#428160 = DIRECTION('',(0.,0.,1.)); +#428161 = DIRECTION('',(1.,0.,-0.)); +#428162 = ADVANCED_FACE('',(#428163,#428166),#428177,.T.); +#428163 = FACE_BOUND('',#428164,.T.); +#428164 = EDGE_LOOP('',(#428165)); +#428165 = ORIENTED_EDGE('',*,*,#428123,.T.); +#428166 = FACE_BOUND('',#428167,.T.); +#428167 = EDGE_LOOP('',(#428168)); +#428168 = ORIENTED_EDGE('',*,*,#428169,.T.); +#428169 = EDGE_CURVE('',#428170,#428170,#428172,.T.); +#428170 = VERTEX_POINT('',#428171); +#428171 = CARTESIAN_POINT('',(152.5,-121.375,1.545)); +#428172 = CIRCLE('',#428173,0.125); +#428173 = AXIS2_PLACEMENT_3D('',#428174,#428175,#428176); +#428174 = CARTESIAN_POINT('',(152.5,-121.25,1.545)); +#428175 = DIRECTION('',(-0.,0.,-1.)); +#428176 = DIRECTION('',(-0.,-1.,0.)); +#428177 = PLANE('',#428178); +#428178 = AXIS2_PLACEMENT_3D('',#428179,#428180,#428181); +#428179 = CARTESIAN_POINT('',(152.5,-121.4,1.545)); +#428180 = DIRECTION('',(0.,0.,1.)); +#428181 = DIRECTION('',(1.,0.,-0.)); +#428182 = ADVANCED_FACE('',(#428183),#428194,.F.); +#428183 = FACE_BOUND('',#428184,.T.); +#428184 = EDGE_LOOP('',(#428185,#428186,#428192,#428193)); +#428185 = ORIENTED_EDGE('',*,*,#428149,.T.); +#428186 = ORIENTED_EDGE('',*,*,#428187,.T.); +#428187 = EDGE_CURVE('',#428150,#428170,#428188,.T.); +#428188 = LINE('',#428189,#428190); +#428189 = CARTESIAN_POINT('',(152.5,-121.375,-3.6E-02)); +#428190 = VECTOR('',#428191,1.); +#428191 = DIRECTION('',(0.,0.,1.)); +#428192 = ORIENTED_EDGE('',*,*,#428169,.F.); +#428193 = ORIENTED_EDGE('',*,*,#428187,.F.); +#428194 = CYLINDRICAL_SURFACE('',#428195,0.125); +#428195 = AXIS2_PLACEMENT_3D('',#428196,#428197,#428198); +#428196 = CARTESIAN_POINT('',(152.5,-121.25,-3.6E-02)); +#428197 = DIRECTION('',(-0.,-0.,-1.)); +#428198 = DIRECTION('',(-0.,-1.,0.)); +#428199 = MANIFOLD_SOLID_BREP('',#428200); +#428200 = CLOSED_SHELL('',(#428201,#428234,#428254,#428274)); +#428201 = ADVANCED_FACE('',(#428202),#428229,.T.); +#428202 = FACE_BOUND('',#428203,.F.); +#428203 = EDGE_LOOP('',(#428204,#428214,#428221,#428222)); +#428204 = ORIENTED_EDGE('',*,*,#428205,.T.); +#428205 = EDGE_CURVE('',#428206,#428208,#428210,.T.); +#428206 = VERTEX_POINT('',#428207); +#428207 = CARTESIAN_POINT('',(124.4,-88.15,-3.5E-02)); +#428208 = VERTEX_POINT('',#428209); +#428209 = CARTESIAN_POINT('',(124.4,-88.15,1.545)); +#428210 = LINE('',#428211,#428212); +#428211 = CARTESIAN_POINT('',(124.4,-88.15,-3.5E-02)); +#428212 = VECTOR('',#428213,1.); +#428213 = DIRECTION('',(0.,0.,1.)); +#428214 = ORIENTED_EDGE('',*,*,#428215,.T.); +#428215 = EDGE_CURVE('',#428208,#428208,#428216,.T.); +#428216 = CIRCLE('',#428217,0.15); +#428217 = AXIS2_PLACEMENT_3D('',#428218,#428219,#428220); +#428218 = CARTESIAN_POINT('',(124.4,-88.,1.545)); +#428219 = DIRECTION('',(0.,0.,1.)); +#428220 = DIRECTION('',(-0.,-1.,0.)); +#428221 = ORIENTED_EDGE('',*,*,#428205,.F.); +#428222 = ORIENTED_EDGE('',*,*,#428223,.F.); +#428223 = EDGE_CURVE('',#428206,#428206,#428224,.T.); +#428224 = CIRCLE('',#428225,0.15); +#428225 = AXIS2_PLACEMENT_3D('',#428226,#428227,#428228); +#428226 = CARTESIAN_POINT('',(124.4,-88.,-3.5E-02)); +#428227 = DIRECTION('',(0.,0.,1.)); +#428228 = DIRECTION('',(-0.,-1.,0.)); +#428229 = CYLINDRICAL_SURFACE('',#428230,0.15); +#428230 = AXIS2_PLACEMENT_3D('',#428231,#428232,#428233); +#428231 = CARTESIAN_POINT('',(124.4,-88.,-3.5E-02)); +#428232 = DIRECTION('',(-0.,-0.,-1.)); +#428233 = DIRECTION('',(-0.,-1.,0.)); +#428234 = ADVANCED_FACE('',(#428235,#428238),#428249,.F.); +#428235 = FACE_BOUND('',#428236,.F.); +#428236 = EDGE_LOOP('',(#428237)); +#428237 = ORIENTED_EDGE('',*,*,#428223,.T.); +#428238 = FACE_BOUND('',#428239,.F.); +#428239 = EDGE_LOOP('',(#428240)); +#428240 = ORIENTED_EDGE('',*,*,#428241,.T.); +#428241 = EDGE_CURVE('',#428242,#428242,#428244,.T.); +#428242 = VERTEX_POINT('',#428243); +#428243 = CARTESIAN_POINT('',(124.4,-88.125,-3.5E-02)); +#428244 = CIRCLE('',#428245,0.125); +#428245 = AXIS2_PLACEMENT_3D('',#428246,#428247,#428248); +#428246 = CARTESIAN_POINT('',(124.4,-88.,-3.5E-02)); +#428247 = DIRECTION('',(-0.,0.,-1.)); +#428248 = DIRECTION('',(-0.,-1.,0.)); +#428249 = PLANE('',#428250); +#428250 = AXIS2_PLACEMENT_3D('',#428251,#428252,#428253); +#428251 = CARTESIAN_POINT('',(124.4,-88.15,-3.5E-02)); +#428252 = DIRECTION('',(0.,0.,1.)); +#428253 = DIRECTION('',(1.,0.,-0.)); +#428254 = ADVANCED_FACE('',(#428255,#428258),#428269,.T.); +#428255 = FACE_BOUND('',#428256,.T.); +#428256 = EDGE_LOOP('',(#428257)); +#428257 = ORIENTED_EDGE('',*,*,#428215,.T.); +#428258 = FACE_BOUND('',#428259,.T.); +#428259 = EDGE_LOOP('',(#428260)); +#428260 = ORIENTED_EDGE('',*,*,#428261,.T.); +#428261 = EDGE_CURVE('',#428262,#428262,#428264,.T.); +#428262 = VERTEX_POINT('',#428263); +#428263 = CARTESIAN_POINT('',(124.4,-88.125,1.545)); +#428264 = CIRCLE('',#428265,0.125); +#428265 = AXIS2_PLACEMENT_3D('',#428266,#428267,#428268); +#428266 = CARTESIAN_POINT('',(124.4,-88.,1.545)); +#428267 = DIRECTION('',(-0.,0.,-1.)); +#428268 = DIRECTION('',(-0.,-1.,0.)); +#428269 = PLANE('',#428270); +#428270 = AXIS2_PLACEMENT_3D('',#428271,#428272,#428273); +#428271 = CARTESIAN_POINT('',(124.4,-88.15,1.545)); +#428272 = DIRECTION('',(0.,0.,1.)); +#428273 = DIRECTION('',(1.,0.,-0.)); +#428274 = ADVANCED_FACE('',(#428275),#428286,.F.); +#428275 = FACE_BOUND('',#428276,.T.); +#428276 = EDGE_LOOP('',(#428277,#428278,#428284,#428285)); +#428277 = ORIENTED_EDGE('',*,*,#428241,.T.); +#428278 = ORIENTED_EDGE('',*,*,#428279,.T.); +#428279 = EDGE_CURVE('',#428242,#428262,#428280,.T.); +#428280 = LINE('',#428281,#428282); +#428281 = CARTESIAN_POINT('',(124.4,-88.125,-3.6E-02)); +#428282 = VECTOR('',#428283,1.); +#428283 = DIRECTION('',(0.,0.,1.)); +#428284 = ORIENTED_EDGE('',*,*,#428261,.F.); +#428285 = ORIENTED_EDGE('',*,*,#428279,.F.); +#428286 = CYLINDRICAL_SURFACE('',#428287,0.125); +#428287 = AXIS2_PLACEMENT_3D('',#428288,#428289,#428290); +#428288 = CARTESIAN_POINT('',(124.4,-88.,-3.6E-02)); +#428289 = DIRECTION('',(-0.,-0.,-1.)); +#428290 = DIRECTION('',(-0.,-1.,0.)); +#428291 = MANIFOLD_SOLID_BREP('',#428292); +#428292 = CLOSED_SHELL('',(#428293,#428326,#428346,#428366)); +#428293 = ADVANCED_FACE('',(#428294),#428321,.T.); +#428294 = FACE_BOUND('',#428295,.F.); +#428295 = EDGE_LOOP('',(#428296,#428306,#428313,#428314)); +#428296 = ORIENTED_EDGE('',*,*,#428297,.T.); +#428297 = EDGE_CURVE('',#428298,#428300,#428302,.T.); +#428298 = VERTEX_POINT('',#428299); +#428299 = CARTESIAN_POINT('',(145.8,-153.45,-3.5E-02)); +#428300 = VERTEX_POINT('',#428301); +#428301 = CARTESIAN_POINT('',(145.8,-153.45,1.545)); +#428302 = LINE('',#428303,#428304); +#428303 = CARTESIAN_POINT('',(145.8,-153.45,-3.5E-02)); +#428304 = VECTOR('',#428305,1.); +#428305 = DIRECTION('',(0.,0.,1.)); +#428306 = ORIENTED_EDGE('',*,*,#428307,.T.); +#428307 = EDGE_CURVE('',#428300,#428300,#428308,.T.); +#428308 = CIRCLE('',#428309,0.15); +#428309 = AXIS2_PLACEMENT_3D('',#428310,#428311,#428312); +#428310 = CARTESIAN_POINT('',(145.8,-153.3,1.545)); +#428311 = DIRECTION('',(0.,0.,1.)); +#428312 = DIRECTION('',(-0.,-1.,0.)); +#428313 = ORIENTED_EDGE('',*,*,#428297,.F.); +#428314 = ORIENTED_EDGE('',*,*,#428315,.F.); +#428315 = EDGE_CURVE('',#428298,#428298,#428316,.T.); +#428316 = CIRCLE('',#428317,0.15); +#428317 = AXIS2_PLACEMENT_3D('',#428318,#428319,#428320); +#428318 = CARTESIAN_POINT('',(145.8,-153.3,-3.5E-02)); +#428319 = DIRECTION('',(0.,0.,1.)); +#428320 = DIRECTION('',(-0.,-1.,0.)); +#428321 = CYLINDRICAL_SURFACE('',#428322,0.15); +#428322 = AXIS2_PLACEMENT_3D('',#428323,#428324,#428325); +#428323 = CARTESIAN_POINT('',(145.8,-153.3,-3.5E-02)); +#428324 = DIRECTION('',(-0.,-0.,-1.)); +#428325 = DIRECTION('',(-0.,-1.,0.)); +#428326 = ADVANCED_FACE('',(#428327,#428330),#428341,.F.); +#428327 = FACE_BOUND('',#428328,.F.); +#428328 = EDGE_LOOP('',(#428329)); +#428329 = ORIENTED_EDGE('',*,*,#428315,.T.); +#428330 = FACE_BOUND('',#428331,.F.); +#428331 = EDGE_LOOP('',(#428332)); +#428332 = ORIENTED_EDGE('',*,*,#428333,.T.); +#428333 = EDGE_CURVE('',#428334,#428334,#428336,.T.); +#428334 = VERTEX_POINT('',#428335); +#428335 = CARTESIAN_POINT('',(145.8,-153.425,-3.5E-02)); +#428336 = CIRCLE('',#428337,0.125); +#428337 = AXIS2_PLACEMENT_3D('',#428338,#428339,#428340); +#428338 = CARTESIAN_POINT('',(145.8,-153.3,-3.5E-02)); +#428339 = DIRECTION('',(-0.,0.,-1.)); +#428340 = DIRECTION('',(-0.,-1.,0.)); +#428341 = PLANE('',#428342); +#428342 = AXIS2_PLACEMENT_3D('',#428343,#428344,#428345); +#428343 = CARTESIAN_POINT('',(145.8,-153.45,-3.5E-02)); +#428344 = DIRECTION('',(0.,0.,1.)); +#428345 = DIRECTION('',(1.,0.,-0.)); +#428346 = ADVANCED_FACE('',(#428347,#428350),#428361,.T.); +#428347 = FACE_BOUND('',#428348,.T.); +#428348 = EDGE_LOOP('',(#428349)); +#428349 = ORIENTED_EDGE('',*,*,#428307,.T.); +#428350 = FACE_BOUND('',#428351,.T.); +#428351 = EDGE_LOOP('',(#428352)); +#428352 = ORIENTED_EDGE('',*,*,#428353,.T.); +#428353 = EDGE_CURVE('',#428354,#428354,#428356,.T.); +#428354 = VERTEX_POINT('',#428355); +#428355 = CARTESIAN_POINT('',(145.8,-153.425,1.545)); +#428356 = CIRCLE('',#428357,0.125); +#428357 = AXIS2_PLACEMENT_3D('',#428358,#428359,#428360); +#428358 = CARTESIAN_POINT('',(145.8,-153.3,1.545)); +#428359 = DIRECTION('',(-0.,0.,-1.)); +#428360 = DIRECTION('',(-0.,-1.,0.)); +#428361 = PLANE('',#428362); +#428362 = AXIS2_PLACEMENT_3D('',#428363,#428364,#428365); +#428363 = CARTESIAN_POINT('',(145.8,-153.45,1.545)); +#428364 = DIRECTION('',(0.,0.,1.)); +#428365 = DIRECTION('',(1.,0.,-0.)); +#428366 = ADVANCED_FACE('',(#428367),#428378,.F.); +#428367 = FACE_BOUND('',#428368,.T.); +#428368 = EDGE_LOOP('',(#428369,#428370,#428376,#428377)); +#428369 = ORIENTED_EDGE('',*,*,#428333,.T.); +#428370 = ORIENTED_EDGE('',*,*,#428371,.T.); +#428371 = EDGE_CURVE('',#428334,#428354,#428372,.T.); +#428372 = LINE('',#428373,#428374); +#428373 = CARTESIAN_POINT('',(145.8,-153.425,-3.6E-02)); +#428374 = VECTOR('',#428375,1.); +#428375 = DIRECTION('',(0.,0.,1.)); +#428376 = ORIENTED_EDGE('',*,*,#428353,.F.); +#428377 = ORIENTED_EDGE('',*,*,#428371,.F.); +#428378 = CYLINDRICAL_SURFACE('',#428379,0.125); +#428379 = AXIS2_PLACEMENT_3D('',#428380,#428381,#428382); +#428380 = CARTESIAN_POINT('',(145.8,-153.3,-3.6E-02)); +#428381 = DIRECTION('',(-0.,-0.,-1.)); +#428382 = DIRECTION('',(-0.,-1.,0.)); +#428383 = MANIFOLD_SOLID_BREP('',#428384); +#428384 = CLOSED_SHELL('',(#428385,#428418,#428438,#428458)); +#428385 = ADVANCED_FACE('',(#428386),#428413,.T.); +#428386 = FACE_BOUND('',#428387,.F.); +#428387 = EDGE_LOOP('',(#428388,#428398,#428405,#428406)); +#428388 = ORIENTED_EDGE('',*,*,#428389,.T.); +#428389 = EDGE_CURVE('',#428390,#428392,#428394,.T.); +#428390 = VERTEX_POINT('',#428391); +#428391 = CARTESIAN_POINT('',(150.5,-90.65,-3.5E-02)); +#428392 = VERTEX_POINT('',#428393); +#428393 = CARTESIAN_POINT('',(150.5,-90.65,1.545)); +#428394 = LINE('',#428395,#428396); +#428395 = CARTESIAN_POINT('',(150.5,-90.65,-3.5E-02)); +#428396 = VECTOR('',#428397,1.); +#428397 = DIRECTION('',(0.,0.,1.)); +#428398 = ORIENTED_EDGE('',*,*,#428399,.T.); +#428399 = EDGE_CURVE('',#428392,#428392,#428400,.T.); +#428400 = CIRCLE('',#428401,0.15); +#428401 = AXIS2_PLACEMENT_3D('',#428402,#428403,#428404); +#428402 = CARTESIAN_POINT('',(150.5,-90.5,1.545)); +#428403 = DIRECTION('',(0.,0.,1.)); +#428404 = DIRECTION('',(-0.,-1.,0.)); +#428405 = ORIENTED_EDGE('',*,*,#428389,.F.); +#428406 = ORIENTED_EDGE('',*,*,#428407,.F.); +#428407 = EDGE_CURVE('',#428390,#428390,#428408,.T.); +#428408 = CIRCLE('',#428409,0.15); +#428409 = AXIS2_PLACEMENT_3D('',#428410,#428411,#428412); +#428410 = CARTESIAN_POINT('',(150.5,-90.5,-3.5E-02)); +#428411 = DIRECTION('',(0.,0.,1.)); +#428412 = DIRECTION('',(-0.,-1.,0.)); +#428413 = CYLINDRICAL_SURFACE('',#428414,0.15); +#428414 = AXIS2_PLACEMENT_3D('',#428415,#428416,#428417); +#428415 = CARTESIAN_POINT('',(150.5,-90.5,-3.5E-02)); +#428416 = DIRECTION('',(-0.,-0.,-1.)); +#428417 = DIRECTION('',(-0.,-1.,0.)); +#428418 = ADVANCED_FACE('',(#428419,#428422),#428433,.F.); +#428419 = FACE_BOUND('',#428420,.F.); +#428420 = EDGE_LOOP('',(#428421)); +#428421 = ORIENTED_EDGE('',*,*,#428407,.T.); +#428422 = FACE_BOUND('',#428423,.F.); +#428423 = EDGE_LOOP('',(#428424)); +#428424 = ORIENTED_EDGE('',*,*,#428425,.T.); +#428425 = EDGE_CURVE('',#428426,#428426,#428428,.T.); +#428426 = VERTEX_POINT('',#428427); +#428427 = CARTESIAN_POINT('',(150.5,-90.625,-3.5E-02)); +#428428 = CIRCLE('',#428429,0.125); +#428429 = AXIS2_PLACEMENT_3D('',#428430,#428431,#428432); +#428430 = CARTESIAN_POINT('',(150.5,-90.5,-3.5E-02)); +#428431 = DIRECTION('',(-0.,0.,-1.)); +#428432 = DIRECTION('',(-0.,-1.,0.)); +#428433 = PLANE('',#428434); +#428434 = AXIS2_PLACEMENT_3D('',#428435,#428436,#428437); +#428435 = CARTESIAN_POINT('',(150.5,-90.65,-3.5E-02)); +#428436 = DIRECTION('',(0.,0.,1.)); +#428437 = DIRECTION('',(1.,0.,-0.)); +#428438 = ADVANCED_FACE('',(#428439,#428442),#428453,.T.); +#428439 = FACE_BOUND('',#428440,.T.); +#428440 = EDGE_LOOP('',(#428441)); +#428441 = ORIENTED_EDGE('',*,*,#428399,.T.); +#428442 = FACE_BOUND('',#428443,.T.); +#428443 = EDGE_LOOP('',(#428444)); +#428444 = ORIENTED_EDGE('',*,*,#428445,.T.); +#428445 = EDGE_CURVE('',#428446,#428446,#428448,.T.); +#428446 = VERTEX_POINT('',#428447); +#428447 = CARTESIAN_POINT('',(150.5,-90.625,1.545)); +#428448 = CIRCLE('',#428449,0.125); +#428449 = AXIS2_PLACEMENT_3D('',#428450,#428451,#428452); +#428450 = CARTESIAN_POINT('',(150.5,-90.5,1.545)); +#428451 = DIRECTION('',(-0.,0.,-1.)); +#428452 = DIRECTION('',(-0.,-1.,0.)); +#428453 = PLANE('',#428454); +#428454 = AXIS2_PLACEMENT_3D('',#428455,#428456,#428457); +#428455 = CARTESIAN_POINT('',(150.5,-90.65,1.545)); +#428456 = DIRECTION('',(0.,0.,1.)); +#428457 = DIRECTION('',(1.,0.,-0.)); +#428458 = ADVANCED_FACE('',(#428459),#428470,.F.); +#428459 = FACE_BOUND('',#428460,.T.); +#428460 = EDGE_LOOP('',(#428461,#428462,#428468,#428469)); +#428461 = ORIENTED_EDGE('',*,*,#428425,.T.); +#428462 = ORIENTED_EDGE('',*,*,#428463,.T.); +#428463 = EDGE_CURVE('',#428426,#428446,#428464,.T.); +#428464 = LINE('',#428465,#428466); +#428465 = CARTESIAN_POINT('',(150.5,-90.625,-3.6E-02)); +#428466 = VECTOR('',#428467,1.); +#428467 = DIRECTION('',(0.,0.,1.)); +#428468 = ORIENTED_EDGE('',*,*,#428445,.F.); +#428469 = ORIENTED_EDGE('',*,*,#428463,.F.); +#428470 = CYLINDRICAL_SURFACE('',#428471,0.125); +#428471 = AXIS2_PLACEMENT_3D('',#428472,#428473,#428474); +#428472 = CARTESIAN_POINT('',(150.5,-90.5,-3.6E-02)); +#428473 = DIRECTION('',(-0.,-0.,-1.)); +#428474 = DIRECTION('',(-0.,-1.,0.)); +#428475 = MANIFOLD_SOLID_BREP('',#428476); +#428476 = CLOSED_SHELL('',(#428477,#428510,#428530,#428550)); +#428477 = ADVANCED_FACE('',(#428478),#428505,.T.); +#428478 = FACE_BOUND('',#428479,.F.); +#428479 = EDGE_LOOP('',(#428480,#428490,#428497,#428498)); +#428480 = ORIENTED_EDGE('',*,*,#428481,.T.); +#428481 = EDGE_CURVE('',#428482,#428484,#428486,.T.); +#428482 = VERTEX_POINT('',#428483); +#428483 = CARTESIAN_POINT('',(129.,-119.15,-3.5E-02)); +#428484 = VERTEX_POINT('',#428485); +#428485 = CARTESIAN_POINT('',(129.,-119.15,1.545)); +#428486 = LINE('',#428487,#428488); +#428487 = CARTESIAN_POINT('',(129.,-119.15,-3.5E-02)); +#428488 = VECTOR('',#428489,1.); +#428489 = DIRECTION('',(0.,0.,1.)); +#428490 = ORIENTED_EDGE('',*,*,#428491,.T.); +#428491 = EDGE_CURVE('',#428484,#428484,#428492,.T.); +#428492 = CIRCLE('',#428493,0.15); +#428493 = AXIS2_PLACEMENT_3D('',#428494,#428495,#428496); +#428494 = CARTESIAN_POINT('',(129.,-119.,1.545)); +#428495 = DIRECTION('',(0.,0.,1.)); +#428496 = DIRECTION('',(-0.,-1.,0.)); +#428497 = ORIENTED_EDGE('',*,*,#428481,.F.); +#428498 = ORIENTED_EDGE('',*,*,#428499,.F.); +#428499 = EDGE_CURVE('',#428482,#428482,#428500,.T.); +#428500 = CIRCLE('',#428501,0.15); +#428501 = AXIS2_PLACEMENT_3D('',#428502,#428503,#428504); +#428502 = CARTESIAN_POINT('',(129.,-119.,-3.5E-02)); +#428503 = DIRECTION('',(0.,0.,1.)); +#428504 = DIRECTION('',(-0.,-1.,0.)); +#428505 = CYLINDRICAL_SURFACE('',#428506,0.15); +#428506 = AXIS2_PLACEMENT_3D('',#428507,#428508,#428509); +#428507 = CARTESIAN_POINT('',(129.,-119.,-3.5E-02)); +#428508 = DIRECTION('',(-0.,-0.,-1.)); +#428509 = DIRECTION('',(-0.,-1.,0.)); +#428510 = ADVANCED_FACE('',(#428511,#428514),#428525,.F.); +#428511 = FACE_BOUND('',#428512,.F.); +#428512 = EDGE_LOOP('',(#428513)); +#428513 = ORIENTED_EDGE('',*,*,#428499,.T.); +#428514 = FACE_BOUND('',#428515,.F.); +#428515 = EDGE_LOOP('',(#428516)); +#428516 = ORIENTED_EDGE('',*,*,#428517,.T.); +#428517 = EDGE_CURVE('',#428518,#428518,#428520,.T.); +#428518 = VERTEX_POINT('',#428519); +#428519 = CARTESIAN_POINT('',(129.,-119.125,-3.5E-02)); +#428520 = CIRCLE('',#428521,0.125); +#428521 = AXIS2_PLACEMENT_3D('',#428522,#428523,#428524); +#428522 = CARTESIAN_POINT('',(129.,-119.,-3.5E-02)); +#428523 = DIRECTION('',(-0.,0.,-1.)); +#428524 = DIRECTION('',(-0.,-1.,0.)); +#428525 = PLANE('',#428526); +#428526 = AXIS2_PLACEMENT_3D('',#428527,#428528,#428529); +#428527 = CARTESIAN_POINT('',(129.,-119.15,-3.5E-02)); +#428528 = DIRECTION('',(0.,0.,1.)); +#428529 = DIRECTION('',(1.,0.,-0.)); +#428530 = ADVANCED_FACE('',(#428531,#428534),#428545,.T.); +#428531 = FACE_BOUND('',#428532,.T.); +#428532 = EDGE_LOOP('',(#428533)); +#428533 = ORIENTED_EDGE('',*,*,#428491,.T.); +#428534 = FACE_BOUND('',#428535,.T.); +#428535 = EDGE_LOOP('',(#428536)); +#428536 = ORIENTED_EDGE('',*,*,#428537,.T.); +#428537 = EDGE_CURVE('',#428538,#428538,#428540,.T.); +#428538 = VERTEX_POINT('',#428539); +#428539 = CARTESIAN_POINT('',(129.,-119.125,1.545)); +#428540 = CIRCLE('',#428541,0.125); +#428541 = AXIS2_PLACEMENT_3D('',#428542,#428543,#428544); +#428542 = CARTESIAN_POINT('',(129.,-119.,1.545)); +#428543 = DIRECTION('',(-0.,0.,-1.)); +#428544 = DIRECTION('',(-0.,-1.,0.)); +#428545 = PLANE('',#428546); +#428546 = AXIS2_PLACEMENT_3D('',#428547,#428548,#428549); +#428547 = CARTESIAN_POINT('',(129.,-119.15,1.545)); +#428548 = DIRECTION('',(0.,0.,1.)); +#428549 = DIRECTION('',(1.,0.,-0.)); +#428550 = ADVANCED_FACE('',(#428551),#428562,.F.); +#428551 = FACE_BOUND('',#428552,.T.); +#428552 = EDGE_LOOP('',(#428553,#428554,#428560,#428561)); +#428553 = ORIENTED_EDGE('',*,*,#428517,.T.); +#428554 = ORIENTED_EDGE('',*,*,#428555,.T.); +#428555 = EDGE_CURVE('',#428518,#428538,#428556,.T.); +#428556 = LINE('',#428557,#428558); +#428557 = CARTESIAN_POINT('',(129.,-119.125,-3.6E-02)); +#428558 = VECTOR('',#428559,1.); +#428559 = DIRECTION('',(0.,0.,1.)); +#428560 = ORIENTED_EDGE('',*,*,#428537,.F.); +#428561 = ORIENTED_EDGE('',*,*,#428555,.F.); +#428562 = CYLINDRICAL_SURFACE('',#428563,0.125); +#428563 = AXIS2_PLACEMENT_3D('',#428564,#428565,#428566); +#428564 = CARTESIAN_POINT('',(129.,-119.,-3.6E-02)); +#428565 = DIRECTION('',(-0.,-0.,-1.)); +#428566 = DIRECTION('',(-0.,-1.,0.)); +#428567 = MANIFOLD_SOLID_BREP('',#428568); +#428568 = CLOSED_SHELL('',(#428569,#428602,#428622,#428642)); +#428569 = ADVANCED_FACE('',(#428570),#428597,.T.); +#428570 = FACE_BOUND('',#428571,.F.); +#428571 = EDGE_LOOP('',(#428572,#428582,#428589,#428590)); +#428572 = ORIENTED_EDGE('',*,*,#428573,.T.); +#428573 = EDGE_CURVE('',#428574,#428576,#428578,.T.); +#428574 = VERTEX_POINT('',#428575); +#428575 = CARTESIAN_POINT('',(150.5,-100.65,-3.5E-02)); +#428576 = VERTEX_POINT('',#428577); +#428577 = CARTESIAN_POINT('',(150.5,-100.65,1.545)); +#428578 = LINE('',#428579,#428580); +#428579 = CARTESIAN_POINT('',(150.5,-100.65,-3.5E-02)); +#428580 = VECTOR('',#428581,1.); +#428581 = DIRECTION('',(0.,0.,1.)); +#428582 = ORIENTED_EDGE('',*,*,#428583,.T.); +#428583 = EDGE_CURVE('',#428576,#428576,#428584,.T.); +#428584 = CIRCLE('',#428585,0.15); +#428585 = AXIS2_PLACEMENT_3D('',#428586,#428587,#428588); +#428586 = CARTESIAN_POINT('',(150.5,-100.5,1.545)); +#428587 = DIRECTION('',(0.,0.,1.)); +#428588 = DIRECTION('',(-0.,-1.,0.)); +#428589 = ORIENTED_EDGE('',*,*,#428573,.F.); +#428590 = ORIENTED_EDGE('',*,*,#428591,.F.); +#428591 = EDGE_CURVE('',#428574,#428574,#428592,.T.); +#428592 = CIRCLE('',#428593,0.15); +#428593 = AXIS2_PLACEMENT_3D('',#428594,#428595,#428596); +#428594 = CARTESIAN_POINT('',(150.5,-100.5,-3.5E-02)); +#428595 = DIRECTION('',(0.,0.,1.)); +#428596 = DIRECTION('',(-0.,-1.,0.)); +#428597 = CYLINDRICAL_SURFACE('',#428598,0.15); +#428598 = AXIS2_PLACEMENT_3D('',#428599,#428600,#428601); +#428599 = CARTESIAN_POINT('',(150.5,-100.5,-3.5E-02)); +#428600 = DIRECTION('',(-0.,-0.,-1.)); +#428601 = DIRECTION('',(-0.,-1.,0.)); +#428602 = ADVANCED_FACE('',(#428603,#428606),#428617,.F.); +#428603 = FACE_BOUND('',#428604,.F.); +#428604 = EDGE_LOOP('',(#428605)); +#428605 = ORIENTED_EDGE('',*,*,#428591,.T.); +#428606 = FACE_BOUND('',#428607,.F.); +#428607 = EDGE_LOOP('',(#428608)); +#428608 = ORIENTED_EDGE('',*,*,#428609,.T.); +#428609 = EDGE_CURVE('',#428610,#428610,#428612,.T.); +#428610 = VERTEX_POINT('',#428611); +#428611 = CARTESIAN_POINT('',(150.5,-100.625,-3.5E-02)); +#428612 = CIRCLE('',#428613,0.125); +#428613 = AXIS2_PLACEMENT_3D('',#428614,#428615,#428616); +#428614 = CARTESIAN_POINT('',(150.5,-100.5,-3.5E-02)); +#428615 = DIRECTION('',(-0.,0.,-1.)); +#428616 = DIRECTION('',(-0.,-1.,0.)); +#428617 = PLANE('',#428618); +#428618 = AXIS2_PLACEMENT_3D('',#428619,#428620,#428621); +#428619 = CARTESIAN_POINT('',(150.5,-100.65,-3.5E-02)); +#428620 = DIRECTION('',(0.,0.,1.)); +#428621 = DIRECTION('',(1.,0.,-0.)); +#428622 = ADVANCED_FACE('',(#428623,#428626),#428637,.T.); +#428623 = FACE_BOUND('',#428624,.T.); +#428624 = EDGE_LOOP('',(#428625)); +#428625 = ORIENTED_EDGE('',*,*,#428583,.T.); +#428626 = FACE_BOUND('',#428627,.T.); +#428627 = EDGE_LOOP('',(#428628)); +#428628 = ORIENTED_EDGE('',*,*,#428629,.T.); +#428629 = EDGE_CURVE('',#428630,#428630,#428632,.T.); +#428630 = VERTEX_POINT('',#428631); +#428631 = CARTESIAN_POINT('',(150.5,-100.625,1.545)); +#428632 = CIRCLE('',#428633,0.125); +#428633 = AXIS2_PLACEMENT_3D('',#428634,#428635,#428636); +#428634 = CARTESIAN_POINT('',(150.5,-100.5,1.545)); +#428635 = DIRECTION('',(-0.,0.,-1.)); +#428636 = DIRECTION('',(-0.,-1.,0.)); +#428637 = PLANE('',#428638); +#428638 = AXIS2_PLACEMENT_3D('',#428639,#428640,#428641); +#428639 = CARTESIAN_POINT('',(150.5,-100.65,1.545)); +#428640 = DIRECTION('',(0.,0.,1.)); +#428641 = DIRECTION('',(1.,0.,-0.)); +#428642 = ADVANCED_FACE('',(#428643),#428654,.F.); +#428643 = FACE_BOUND('',#428644,.T.); +#428644 = EDGE_LOOP('',(#428645,#428646,#428652,#428653)); +#428645 = ORIENTED_EDGE('',*,*,#428609,.T.); +#428646 = ORIENTED_EDGE('',*,*,#428647,.T.); +#428647 = EDGE_CURVE('',#428610,#428630,#428648,.T.); +#428648 = LINE('',#428649,#428650); +#428649 = CARTESIAN_POINT('',(150.5,-100.625,-3.6E-02)); +#428650 = VECTOR('',#428651,1.); +#428651 = DIRECTION('',(0.,0.,1.)); +#428652 = ORIENTED_EDGE('',*,*,#428629,.F.); +#428653 = ORIENTED_EDGE('',*,*,#428647,.F.); +#428654 = CYLINDRICAL_SURFACE('',#428655,0.125); +#428655 = AXIS2_PLACEMENT_3D('',#428656,#428657,#428658); +#428656 = CARTESIAN_POINT('',(150.5,-100.5,-3.6E-02)); +#428657 = DIRECTION('',(-0.,-0.,-1.)); +#428658 = DIRECTION('',(-0.,-1.,0.)); +#428659 = MANIFOLD_SOLID_BREP('',#428660); +#428660 = CLOSED_SHELL('',(#428661,#428694,#428714,#428734)); +#428661 = ADVANCED_FACE('',(#428662),#428689,.T.); +#428662 = FACE_BOUND('',#428663,.F.); +#428663 = EDGE_LOOP('',(#428664,#428674,#428681,#428682)); +#428664 = ORIENTED_EDGE('',*,*,#428665,.T.); +#428665 = EDGE_CURVE('',#428666,#428668,#428670,.T.); +#428666 = VERTEX_POINT('',#428667); +#428667 = CARTESIAN_POINT('',(143.6,-77.35,-3.5E-02)); +#428668 = VERTEX_POINT('',#428669); +#428669 = CARTESIAN_POINT('',(143.6,-77.35,1.545)); +#428670 = LINE('',#428671,#428672); +#428671 = CARTESIAN_POINT('',(143.6,-77.35,-3.5E-02)); +#428672 = VECTOR('',#428673,1.); +#428673 = DIRECTION('',(0.,0.,1.)); +#428674 = ORIENTED_EDGE('',*,*,#428675,.T.); +#428675 = EDGE_CURVE('',#428668,#428668,#428676,.T.); +#428676 = CIRCLE('',#428677,0.15); +#428677 = AXIS2_PLACEMENT_3D('',#428678,#428679,#428680); +#428678 = CARTESIAN_POINT('',(143.6,-77.2,1.545)); +#428679 = DIRECTION('',(0.,0.,1.)); +#428680 = DIRECTION('',(-0.,-1.,0.)); +#428681 = ORIENTED_EDGE('',*,*,#428665,.F.); +#428682 = ORIENTED_EDGE('',*,*,#428683,.F.); +#428683 = EDGE_CURVE('',#428666,#428666,#428684,.T.); +#428684 = CIRCLE('',#428685,0.15); +#428685 = AXIS2_PLACEMENT_3D('',#428686,#428687,#428688); +#428686 = CARTESIAN_POINT('',(143.6,-77.2,-3.5E-02)); +#428687 = DIRECTION('',(0.,0.,1.)); +#428688 = DIRECTION('',(-0.,-1.,0.)); +#428689 = CYLINDRICAL_SURFACE('',#428690,0.15); +#428690 = AXIS2_PLACEMENT_3D('',#428691,#428692,#428693); +#428691 = CARTESIAN_POINT('',(143.6,-77.2,-3.5E-02)); +#428692 = DIRECTION('',(-0.,-0.,-1.)); +#428693 = DIRECTION('',(-0.,-1.,0.)); +#428694 = ADVANCED_FACE('',(#428695,#428698),#428709,.F.); +#428695 = FACE_BOUND('',#428696,.F.); +#428696 = EDGE_LOOP('',(#428697)); +#428697 = ORIENTED_EDGE('',*,*,#428683,.T.); +#428698 = FACE_BOUND('',#428699,.F.); +#428699 = EDGE_LOOP('',(#428700)); +#428700 = ORIENTED_EDGE('',*,*,#428701,.T.); +#428701 = EDGE_CURVE('',#428702,#428702,#428704,.T.); +#428702 = VERTEX_POINT('',#428703); +#428703 = CARTESIAN_POINT('',(143.6,-77.325,-3.5E-02)); +#428704 = CIRCLE('',#428705,0.125); +#428705 = AXIS2_PLACEMENT_3D('',#428706,#428707,#428708); +#428706 = CARTESIAN_POINT('',(143.6,-77.2,-3.5E-02)); +#428707 = DIRECTION('',(-0.,0.,-1.)); +#428708 = DIRECTION('',(-0.,-1.,0.)); +#428709 = PLANE('',#428710); +#428710 = AXIS2_PLACEMENT_3D('',#428711,#428712,#428713); +#428711 = CARTESIAN_POINT('',(143.6,-77.35,-3.5E-02)); +#428712 = DIRECTION('',(0.,0.,1.)); +#428713 = DIRECTION('',(1.,0.,-0.)); +#428714 = ADVANCED_FACE('',(#428715,#428718),#428729,.T.); +#428715 = FACE_BOUND('',#428716,.T.); +#428716 = EDGE_LOOP('',(#428717)); +#428717 = ORIENTED_EDGE('',*,*,#428675,.T.); +#428718 = FACE_BOUND('',#428719,.T.); +#428719 = EDGE_LOOP('',(#428720)); +#428720 = ORIENTED_EDGE('',*,*,#428721,.T.); +#428721 = EDGE_CURVE('',#428722,#428722,#428724,.T.); +#428722 = VERTEX_POINT('',#428723); +#428723 = CARTESIAN_POINT('',(143.6,-77.325,1.545)); +#428724 = CIRCLE('',#428725,0.125); +#428725 = AXIS2_PLACEMENT_3D('',#428726,#428727,#428728); +#428726 = CARTESIAN_POINT('',(143.6,-77.2,1.545)); +#428727 = DIRECTION('',(-0.,0.,-1.)); +#428728 = DIRECTION('',(-0.,-1.,0.)); +#428729 = PLANE('',#428730); +#428730 = AXIS2_PLACEMENT_3D('',#428731,#428732,#428733); +#428731 = CARTESIAN_POINT('',(143.6,-77.35,1.545)); +#428732 = DIRECTION('',(0.,0.,1.)); +#428733 = DIRECTION('',(1.,0.,-0.)); +#428734 = ADVANCED_FACE('',(#428735),#428746,.F.); +#428735 = FACE_BOUND('',#428736,.T.); +#428736 = EDGE_LOOP('',(#428737,#428738,#428744,#428745)); +#428737 = ORIENTED_EDGE('',*,*,#428701,.T.); +#428738 = ORIENTED_EDGE('',*,*,#428739,.T.); +#428739 = EDGE_CURVE('',#428702,#428722,#428740,.T.); +#428740 = LINE('',#428741,#428742); +#428741 = CARTESIAN_POINT('',(143.6,-77.325,-3.6E-02)); +#428742 = VECTOR('',#428743,1.); +#428743 = DIRECTION('',(0.,0.,1.)); +#428744 = ORIENTED_EDGE('',*,*,#428721,.F.); +#428745 = ORIENTED_EDGE('',*,*,#428739,.F.); +#428746 = CYLINDRICAL_SURFACE('',#428747,0.125); +#428747 = AXIS2_PLACEMENT_3D('',#428748,#428749,#428750); +#428748 = CARTESIAN_POINT('',(143.6,-77.2,-3.6E-02)); +#428749 = DIRECTION('',(-0.,-0.,-1.)); +#428750 = DIRECTION('',(-0.,-1.,0.)); +#428751 = MANIFOLD_SOLID_BREP('',#428752); +#428752 = CLOSED_SHELL('',(#428753,#428786,#428806,#428826)); +#428753 = ADVANCED_FACE('',(#428754),#428781,.T.); +#428754 = FACE_BOUND('',#428755,.F.); +#428755 = EDGE_LOOP('',(#428756,#428766,#428773,#428774)); +#428756 = ORIENTED_EDGE('',*,*,#428757,.T.); +#428757 = EDGE_CURVE('',#428758,#428760,#428762,.T.); +#428758 = VERTEX_POINT('',#428759); +#428759 = CARTESIAN_POINT('',(139.5,-120.15,-3.5E-02)); +#428760 = VERTEX_POINT('',#428761); +#428761 = CARTESIAN_POINT('',(139.5,-120.15,1.545)); +#428762 = LINE('',#428763,#428764); +#428763 = CARTESIAN_POINT('',(139.5,-120.15,-3.5E-02)); +#428764 = VECTOR('',#428765,1.); +#428765 = DIRECTION('',(0.,0.,1.)); +#428766 = ORIENTED_EDGE('',*,*,#428767,.T.); +#428767 = EDGE_CURVE('',#428760,#428760,#428768,.T.); +#428768 = CIRCLE('',#428769,0.15); +#428769 = AXIS2_PLACEMENT_3D('',#428770,#428771,#428772); +#428770 = CARTESIAN_POINT('',(139.5,-120.,1.545)); +#428771 = DIRECTION('',(0.,0.,1.)); +#428772 = DIRECTION('',(-0.,-1.,0.)); +#428773 = ORIENTED_EDGE('',*,*,#428757,.F.); +#428774 = ORIENTED_EDGE('',*,*,#428775,.F.); +#428775 = EDGE_CURVE('',#428758,#428758,#428776,.T.); +#428776 = CIRCLE('',#428777,0.15); +#428777 = AXIS2_PLACEMENT_3D('',#428778,#428779,#428780); +#428778 = CARTESIAN_POINT('',(139.5,-120.,-3.5E-02)); +#428779 = DIRECTION('',(0.,0.,1.)); +#428780 = DIRECTION('',(-0.,-1.,0.)); +#428781 = CYLINDRICAL_SURFACE('',#428782,0.15); +#428782 = AXIS2_PLACEMENT_3D('',#428783,#428784,#428785); +#428783 = CARTESIAN_POINT('',(139.5,-120.,-3.5E-02)); +#428784 = DIRECTION('',(-0.,-0.,-1.)); +#428785 = DIRECTION('',(-0.,-1.,0.)); +#428786 = ADVANCED_FACE('',(#428787,#428790),#428801,.F.); +#428787 = FACE_BOUND('',#428788,.F.); +#428788 = EDGE_LOOP('',(#428789)); +#428789 = ORIENTED_EDGE('',*,*,#428775,.T.); +#428790 = FACE_BOUND('',#428791,.F.); +#428791 = EDGE_LOOP('',(#428792)); +#428792 = ORIENTED_EDGE('',*,*,#428793,.T.); +#428793 = EDGE_CURVE('',#428794,#428794,#428796,.T.); +#428794 = VERTEX_POINT('',#428795); +#428795 = CARTESIAN_POINT('',(139.5,-120.125,-3.5E-02)); +#428796 = CIRCLE('',#428797,0.125); +#428797 = AXIS2_PLACEMENT_3D('',#428798,#428799,#428800); +#428798 = CARTESIAN_POINT('',(139.5,-120.,-3.5E-02)); +#428799 = DIRECTION('',(-0.,0.,-1.)); +#428800 = DIRECTION('',(-0.,-1.,0.)); +#428801 = PLANE('',#428802); +#428802 = AXIS2_PLACEMENT_3D('',#428803,#428804,#428805); +#428803 = CARTESIAN_POINT('',(139.5,-120.15,-3.5E-02)); +#428804 = DIRECTION('',(0.,0.,1.)); +#428805 = DIRECTION('',(1.,0.,-0.)); +#428806 = ADVANCED_FACE('',(#428807,#428810),#428821,.T.); +#428807 = FACE_BOUND('',#428808,.T.); +#428808 = EDGE_LOOP('',(#428809)); +#428809 = ORIENTED_EDGE('',*,*,#428767,.T.); +#428810 = FACE_BOUND('',#428811,.T.); +#428811 = EDGE_LOOP('',(#428812)); +#428812 = ORIENTED_EDGE('',*,*,#428813,.T.); +#428813 = EDGE_CURVE('',#428814,#428814,#428816,.T.); +#428814 = VERTEX_POINT('',#428815); +#428815 = CARTESIAN_POINT('',(139.5,-120.125,1.545)); +#428816 = CIRCLE('',#428817,0.125); +#428817 = AXIS2_PLACEMENT_3D('',#428818,#428819,#428820); +#428818 = CARTESIAN_POINT('',(139.5,-120.,1.545)); +#428819 = DIRECTION('',(-0.,0.,-1.)); +#428820 = DIRECTION('',(-0.,-1.,0.)); +#428821 = PLANE('',#428822); +#428822 = AXIS2_PLACEMENT_3D('',#428823,#428824,#428825); +#428823 = CARTESIAN_POINT('',(139.5,-120.15,1.545)); +#428824 = DIRECTION('',(0.,0.,1.)); +#428825 = DIRECTION('',(1.,0.,-0.)); +#428826 = ADVANCED_FACE('',(#428827),#428838,.F.); +#428827 = FACE_BOUND('',#428828,.T.); +#428828 = EDGE_LOOP('',(#428829,#428830,#428836,#428837)); +#428829 = ORIENTED_EDGE('',*,*,#428793,.T.); +#428830 = ORIENTED_EDGE('',*,*,#428831,.T.); +#428831 = EDGE_CURVE('',#428794,#428814,#428832,.T.); +#428832 = LINE('',#428833,#428834); +#428833 = CARTESIAN_POINT('',(139.5,-120.125,-3.6E-02)); +#428834 = VECTOR('',#428835,1.); +#428835 = DIRECTION('',(0.,0.,1.)); +#428836 = ORIENTED_EDGE('',*,*,#428813,.F.); +#428837 = ORIENTED_EDGE('',*,*,#428831,.F.); +#428838 = CYLINDRICAL_SURFACE('',#428839,0.125); +#428839 = AXIS2_PLACEMENT_3D('',#428840,#428841,#428842); +#428840 = CARTESIAN_POINT('',(139.5,-120.,-3.6E-02)); +#428841 = DIRECTION('',(-0.,-0.,-1.)); +#428842 = DIRECTION('',(-0.,-1.,0.)); +#428843 = MANIFOLD_SOLID_BREP('',#428844); +#428844 = CLOSED_SHELL('',(#428845,#428878,#428898,#428918)); +#428845 = ADVANCED_FACE('',(#428846),#428873,.T.); +#428846 = FACE_BOUND('',#428847,.F.); +#428847 = EDGE_LOOP('',(#428848,#428858,#428865,#428866)); +#428848 = ORIENTED_EDGE('',*,*,#428849,.T.); +#428849 = EDGE_CURVE('',#428850,#428852,#428854,.T.); +#428850 = VERTEX_POINT('',#428851); +#428851 = CARTESIAN_POINT('',(137.,-119.15,-3.5E-02)); +#428852 = VERTEX_POINT('',#428853); +#428853 = CARTESIAN_POINT('',(137.,-119.15,1.545)); +#428854 = LINE('',#428855,#428856); +#428855 = CARTESIAN_POINT('',(137.,-119.15,-3.5E-02)); +#428856 = VECTOR('',#428857,1.); +#428857 = DIRECTION('',(0.,0.,1.)); +#428858 = ORIENTED_EDGE('',*,*,#428859,.T.); +#428859 = EDGE_CURVE('',#428852,#428852,#428860,.T.); +#428860 = CIRCLE('',#428861,0.15); +#428861 = AXIS2_PLACEMENT_3D('',#428862,#428863,#428864); +#428862 = CARTESIAN_POINT('',(137.,-119.,1.545)); +#428863 = DIRECTION('',(0.,0.,1.)); +#428864 = DIRECTION('',(-0.,-1.,0.)); +#428865 = ORIENTED_EDGE('',*,*,#428849,.F.); +#428866 = ORIENTED_EDGE('',*,*,#428867,.F.); +#428867 = EDGE_CURVE('',#428850,#428850,#428868,.T.); +#428868 = CIRCLE('',#428869,0.15); +#428869 = AXIS2_PLACEMENT_3D('',#428870,#428871,#428872); +#428870 = CARTESIAN_POINT('',(137.,-119.,-3.5E-02)); +#428871 = DIRECTION('',(0.,0.,1.)); +#428872 = DIRECTION('',(-0.,-1.,0.)); +#428873 = CYLINDRICAL_SURFACE('',#428874,0.15); +#428874 = AXIS2_PLACEMENT_3D('',#428875,#428876,#428877); +#428875 = CARTESIAN_POINT('',(137.,-119.,-3.5E-02)); +#428876 = DIRECTION('',(-0.,-0.,-1.)); +#428877 = DIRECTION('',(-0.,-1.,0.)); +#428878 = ADVANCED_FACE('',(#428879,#428882),#428893,.F.); +#428879 = FACE_BOUND('',#428880,.F.); +#428880 = EDGE_LOOP('',(#428881)); +#428881 = ORIENTED_EDGE('',*,*,#428867,.T.); +#428882 = FACE_BOUND('',#428883,.F.); +#428883 = EDGE_LOOP('',(#428884)); +#428884 = ORIENTED_EDGE('',*,*,#428885,.T.); +#428885 = EDGE_CURVE('',#428886,#428886,#428888,.T.); +#428886 = VERTEX_POINT('',#428887); +#428887 = CARTESIAN_POINT('',(137.,-119.125,-3.5E-02)); +#428888 = CIRCLE('',#428889,0.125); +#428889 = AXIS2_PLACEMENT_3D('',#428890,#428891,#428892); +#428890 = CARTESIAN_POINT('',(137.,-119.,-3.5E-02)); +#428891 = DIRECTION('',(-0.,0.,-1.)); +#428892 = DIRECTION('',(-0.,-1.,0.)); +#428893 = PLANE('',#428894); +#428894 = AXIS2_PLACEMENT_3D('',#428895,#428896,#428897); +#428895 = CARTESIAN_POINT('',(137.,-119.15,-3.5E-02)); +#428896 = DIRECTION('',(0.,0.,1.)); +#428897 = DIRECTION('',(1.,0.,-0.)); +#428898 = ADVANCED_FACE('',(#428899,#428902),#428913,.T.); +#428899 = FACE_BOUND('',#428900,.T.); +#428900 = EDGE_LOOP('',(#428901)); +#428901 = ORIENTED_EDGE('',*,*,#428859,.T.); +#428902 = FACE_BOUND('',#428903,.T.); +#428903 = EDGE_LOOP('',(#428904)); +#428904 = ORIENTED_EDGE('',*,*,#428905,.T.); +#428905 = EDGE_CURVE('',#428906,#428906,#428908,.T.); +#428906 = VERTEX_POINT('',#428907); +#428907 = CARTESIAN_POINT('',(137.,-119.125,1.545)); +#428908 = CIRCLE('',#428909,0.125); +#428909 = AXIS2_PLACEMENT_3D('',#428910,#428911,#428912); +#428910 = CARTESIAN_POINT('',(137.,-119.,1.545)); +#428911 = DIRECTION('',(-0.,0.,-1.)); +#428912 = DIRECTION('',(-0.,-1.,0.)); +#428913 = PLANE('',#428914); +#428914 = AXIS2_PLACEMENT_3D('',#428915,#428916,#428917); +#428915 = CARTESIAN_POINT('',(137.,-119.15,1.545)); +#428916 = DIRECTION('',(0.,0.,1.)); +#428917 = DIRECTION('',(1.,0.,-0.)); +#428918 = ADVANCED_FACE('',(#428919),#428930,.F.); +#428919 = FACE_BOUND('',#428920,.T.); +#428920 = EDGE_LOOP('',(#428921,#428922,#428928,#428929)); +#428921 = ORIENTED_EDGE('',*,*,#428885,.T.); +#428922 = ORIENTED_EDGE('',*,*,#428923,.T.); +#428923 = EDGE_CURVE('',#428886,#428906,#428924,.T.); +#428924 = LINE('',#428925,#428926); +#428925 = CARTESIAN_POINT('',(137.,-119.125,-3.6E-02)); +#428926 = VECTOR('',#428927,1.); +#428927 = DIRECTION('',(0.,0.,1.)); +#428928 = ORIENTED_EDGE('',*,*,#428905,.F.); +#428929 = ORIENTED_EDGE('',*,*,#428923,.F.); +#428930 = CYLINDRICAL_SURFACE('',#428931,0.125); +#428931 = AXIS2_PLACEMENT_3D('',#428932,#428933,#428934); +#428932 = CARTESIAN_POINT('',(137.,-119.,-3.6E-02)); +#428933 = DIRECTION('',(-0.,-0.,-1.)); +#428934 = DIRECTION('',(-0.,-1.,0.)); +#428935 = MANIFOLD_SOLID_BREP('',#428936); +#428936 = CLOSED_SHELL('',(#428937,#428970,#428990,#429010)); +#428937 = ADVANCED_FACE('',(#428938),#428965,.T.); +#428938 = FACE_BOUND('',#428939,.F.); +#428939 = EDGE_LOOP('',(#428940,#428950,#428957,#428958)); +#428940 = ORIENTED_EDGE('',*,*,#428941,.T.); +#428941 = EDGE_CURVE('',#428942,#428944,#428946,.T.); +#428942 = VERTEX_POINT('',#428943); +#428943 = CARTESIAN_POINT('',(135.470098,-154.393783,-3.5E-02)); +#428944 = VERTEX_POINT('',#428945); +#428945 = CARTESIAN_POINT('',(135.470098,-154.393783,1.545)); +#428946 = LINE('',#428947,#428948); +#428947 = CARTESIAN_POINT('',(135.470098,-154.393783,-3.5E-02)); +#428948 = VECTOR('',#428949,1.); +#428949 = DIRECTION('',(0.,0.,1.)); +#428950 = ORIENTED_EDGE('',*,*,#428951,.T.); +#428951 = EDGE_CURVE('',#428944,#428944,#428952,.T.); +#428952 = CIRCLE('',#428953,0.15); +#428953 = AXIS2_PLACEMENT_3D('',#428954,#428955,#428956); +#428954 = CARTESIAN_POINT('',(135.470098,-154.243783,1.545)); +#428955 = DIRECTION('',(0.,0.,1.)); +#428956 = DIRECTION('',(-0.,-1.,0.)); +#428957 = ORIENTED_EDGE('',*,*,#428941,.F.); +#428958 = ORIENTED_EDGE('',*,*,#428959,.F.); +#428959 = EDGE_CURVE('',#428942,#428942,#428960,.T.); +#428960 = CIRCLE('',#428961,0.15); +#428961 = AXIS2_PLACEMENT_3D('',#428962,#428963,#428964); +#428962 = CARTESIAN_POINT('',(135.470098,-154.243783,-3.5E-02)); +#428963 = DIRECTION('',(0.,0.,1.)); +#428964 = DIRECTION('',(-0.,-1.,0.)); +#428965 = CYLINDRICAL_SURFACE('',#428966,0.15); +#428966 = AXIS2_PLACEMENT_3D('',#428967,#428968,#428969); +#428967 = CARTESIAN_POINT('',(135.470098,-154.243783,-3.5E-02)); +#428968 = DIRECTION('',(-0.,-0.,-1.)); +#428969 = DIRECTION('',(-0.,-1.,0.)); +#428970 = ADVANCED_FACE('',(#428971,#428974),#428985,.F.); +#428971 = FACE_BOUND('',#428972,.F.); +#428972 = EDGE_LOOP('',(#428973)); +#428973 = ORIENTED_EDGE('',*,*,#428959,.T.); +#428974 = FACE_BOUND('',#428975,.F.); +#428975 = EDGE_LOOP('',(#428976)); +#428976 = ORIENTED_EDGE('',*,*,#428977,.T.); +#428977 = EDGE_CURVE('',#428978,#428978,#428980,.T.); +#428978 = VERTEX_POINT('',#428979); +#428979 = CARTESIAN_POINT('',(135.470098,-154.368783,-3.5E-02)); +#428980 = CIRCLE('',#428981,0.125); +#428981 = AXIS2_PLACEMENT_3D('',#428982,#428983,#428984); +#428982 = CARTESIAN_POINT('',(135.470098,-154.243783,-3.5E-02)); +#428983 = DIRECTION('',(-0.,0.,-1.)); +#428984 = DIRECTION('',(-0.,-1.,0.)); +#428985 = PLANE('',#428986); +#428986 = AXIS2_PLACEMENT_3D('',#428987,#428988,#428989); +#428987 = CARTESIAN_POINT('',(135.470098,-154.393783,-3.5E-02)); +#428988 = DIRECTION('',(0.,0.,1.)); +#428989 = DIRECTION('',(1.,0.,-0.)); +#428990 = ADVANCED_FACE('',(#428991,#428994),#429005,.T.); +#428991 = FACE_BOUND('',#428992,.T.); +#428992 = EDGE_LOOP('',(#428993)); +#428993 = ORIENTED_EDGE('',*,*,#428951,.T.); +#428994 = FACE_BOUND('',#428995,.T.); +#428995 = EDGE_LOOP('',(#428996)); +#428996 = ORIENTED_EDGE('',*,*,#428997,.T.); +#428997 = EDGE_CURVE('',#428998,#428998,#429000,.T.); +#428998 = VERTEX_POINT('',#428999); +#428999 = CARTESIAN_POINT('',(135.470098,-154.368783,1.545)); +#429000 = CIRCLE('',#429001,0.125); +#429001 = AXIS2_PLACEMENT_3D('',#429002,#429003,#429004); +#429002 = CARTESIAN_POINT('',(135.470098,-154.243783,1.545)); +#429003 = DIRECTION('',(-0.,0.,-1.)); +#429004 = DIRECTION('',(-0.,-1.,0.)); +#429005 = PLANE('',#429006); +#429006 = AXIS2_PLACEMENT_3D('',#429007,#429008,#429009); +#429007 = CARTESIAN_POINT('',(135.470098,-154.393783,1.545)); +#429008 = DIRECTION('',(0.,0.,1.)); +#429009 = DIRECTION('',(1.,0.,-0.)); +#429010 = ADVANCED_FACE('',(#429011),#429022,.F.); +#429011 = FACE_BOUND('',#429012,.T.); +#429012 = EDGE_LOOP('',(#429013,#429014,#429020,#429021)); +#429013 = ORIENTED_EDGE('',*,*,#428977,.T.); +#429014 = ORIENTED_EDGE('',*,*,#429015,.T.); +#429015 = EDGE_CURVE('',#428978,#428998,#429016,.T.); +#429016 = LINE('',#429017,#429018); +#429017 = CARTESIAN_POINT('',(135.470098,-154.368783,-3.6E-02)); +#429018 = VECTOR('',#429019,1.); +#429019 = DIRECTION('',(0.,0.,1.)); +#429020 = ORIENTED_EDGE('',*,*,#428997,.F.); +#429021 = ORIENTED_EDGE('',*,*,#429015,.F.); +#429022 = CYLINDRICAL_SURFACE('',#429023,0.125); +#429023 = AXIS2_PLACEMENT_3D('',#429024,#429025,#429026); +#429024 = CARTESIAN_POINT('',(135.470098,-154.243783,-3.6E-02)); +#429025 = DIRECTION('',(-0.,-0.,-1.)); +#429026 = DIRECTION('',(-0.,-1.,0.)); +#429027 = MANIFOLD_SOLID_BREP('',#429028); +#429028 = CLOSED_SHELL('',(#429029,#429062,#429082,#429102)); +#429029 = ADVANCED_FACE('',(#429030),#429057,.T.); +#429030 = FACE_BOUND('',#429031,.F.); +#429031 = EDGE_LOOP('',(#429032,#429042,#429049,#429050)); +#429032 = ORIENTED_EDGE('',*,*,#429033,.T.); +#429033 = EDGE_CURVE('',#429034,#429036,#429038,.T.); +#429034 = VERTEX_POINT('',#429035); +#429035 = CARTESIAN_POINT('',(139.556798,-154.382791,-3.5E-02)); +#429036 = VERTEX_POINT('',#429037); +#429037 = CARTESIAN_POINT('',(139.556798,-154.382791,1.545)); +#429038 = LINE('',#429039,#429040); +#429039 = CARTESIAN_POINT('',(139.556798,-154.382791,-3.5E-02)); +#429040 = VECTOR('',#429041,1.); +#429041 = DIRECTION('',(0.,0.,1.)); +#429042 = ORIENTED_EDGE('',*,*,#429043,.T.); +#429043 = EDGE_CURVE('',#429036,#429036,#429044,.T.); +#429044 = CIRCLE('',#429045,0.15); +#429045 = AXIS2_PLACEMENT_3D('',#429046,#429047,#429048); +#429046 = CARTESIAN_POINT('',(139.556798,-154.232791,1.545)); +#429047 = DIRECTION('',(0.,0.,1.)); +#429048 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#429049 = ORIENTED_EDGE('',*,*,#429033,.F.); +#429050 = ORIENTED_EDGE('',*,*,#429051,.F.); +#429051 = EDGE_CURVE('',#429034,#429034,#429052,.T.); +#429052 = CIRCLE('',#429053,0.15); +#429053 = AXIS2_PLACEMENT_3D('',#429054,#429055,#429056); +#429054 = CARTESIAN_POINT('',(139.556798,-154.232791,-3.5E-02)); +#429055 = DIRECTION('',(0.,0.,1.)); +#429056 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#429057 = CYLINDRICAL_SURFACE('',#429058,0.15); +#429058 = AXIS2_PLACEMENT_3D('',#429059,#429060,#429061); +#429059 = CARTESIAN_POINT('',(139.556798,-154.232791,-3.5E-02)); +#429060 = DIRECTION('',(-0.,-0.,-1.)); +#429061 = DIRECTION('',(-1.894780628694E-13,-1.,0.)); +#429062 = ADVANCED_FACE('',(#429063,#429066),#429077,.F.); +#429063 = FACE_BOUND('',#429064,.F.); +#429064 = EDGE_LOOP('',(#429065)); +#429065 = ORIENTED_EDGE('',*,*,#429051,.T.); +#429066 = FACE_BOUND('',#429067,.F.); +#429067 = EDGE_LOOP('',(#429068)); +#429068 = ORIENTED_EDGE('',*,*,#429069,.T.); +#429069 = EDGE_CURVE('',#429070,#429070,#429072,.T.); +#429070 = VERTEX_POINT('',#429071); +#429071 = CARTESIAN_POINT('',(139.556798,-154.357791,-3.5E-02)); +#429072 = CIRCLE('',#429073,0.125); +#429073 = AXIS2_PLACEMENT_3D('',#429074,#429075,#429076); +#429074 = CARTESIAN_POINT('',(139.556798,-154.232791,-3.5E-02)); +#429075 = DIRECTION('',(-0.,0.,-1.)); +#429076 = DIRECTION('',(-0.,-1.,0.)); +#429077 = PLANE('',#429078); +#429078 = AXIS2_PLACEMENT_3D('',#429079,#429080,#429081); +#429079 = CARTESIAN_POINT('',(139.556798,-154.382791,-3.5E-02)); +#429080 = DIRECTION('',(0.,0.,1.)); +#429081 = DIRECTION('',(1.,0.,-0.)); +#429082 = ADVANCED_FACE('',(#429083,#429086),#429097,.T.); +#429083 = FACE_BOUND('',#429084,.T.); +#429084 = EDGE_LOOP('',(#429085)); +#429085 = ORIENTED_EDGE('',*,*,#429043,.T.); +#429086 = FACE_BOUND('',#429087,.T.); +#429087 = EDGE_LOOP('',(#429088)); +#429088 = ORIENTED_EDGE('',*,*,#429089,.T.); +#429089 = EDGE_CURVE('',#429090,#429090,#429092,.T.); +#429090 = VERTEX_POINT('',#429091); +#429091 = CARTESIAN_POINT('',(139.556798,-154.357791,1.545)); +#429092 = CIRCLE('',#429093,0.125); +#429093 = AXIS2_PLACEMENT_3D('',#429094,#429095,#429096); +#429094 = CARTESIAN_POINT('',(139.556798,-154.232791,1.545)); +#429095 = DIRECTION('',(-0.,0.,-1.)); +#429096 = DIRECTION('',(-0.,-1.,0.)); +#429097 = PLANE('',#429098); +#429098 = AXIS2_PLACEMENT_3D('',#429099,#429100,#429101); +#429099 = CARTESIAN_POINT('',(139.556798,-154.382791,1.545)); +#429100 = DIRECTION('',(0.,0.,1.)); +#429101 = DIRECTION('',(1.,0.,-0.)); +#429102 = ADVANCED_FACE('',(#429103),#429114,.F.); +#429103 = FACE_BOUND('',#429104,.T.); +#429104 = EDGE_LOOP('',(#429105,#429106,#429112,#429113)); +#429105 = ORIENTED_EDGE('',*,*,#429069,.T.); +#429106 = ORIENTED_EDGE('',*,*,#429107,.T.); +#429107 = EDGE_CURVE('',#429070,#429090,#429108,.T.); +#429108 = LINE('',#429109,#429110); +#429109 = CARTESIAN_POINT('',(139.556798,-154.357791,-3.6E-02)); +#429110 = VECTOR('',#429111,1.); +#429111 = DIRECTION('',(0.,0.,1.)); +#429112 = ORIENTED_EDGE('',*,*,#429089,.F.); +#429113 = ORIENTED_EDGE('',*,*,#429107,.F.); +#429114 = CYLINDRICAL_SURFACE('',#429115,0.125); +#429115 = AXIS2_PLACEMENT_3D('',#429116,#429117,#429118); +#429116 = CARTESIAN_POINT('',(139.556798,-154.232791,-3.6E-02)); +#429117 = DIRECTION('',(-0.,-0.,-1.)); +#429118 = DIRECTION('',(-0.,-1.,0.)); +#429119 = MANIFOLD_SOLID_BREP('',#429120); +#429120 = CLOSED_SHELL('',(#429121,#429154,#429174,#429194)); +#429121 = ADVANCED_FACE('',(#429122),#429149,.T.); +#429122 = FACE_BOUND('',#429123,.F.); +#429123 = EDGE_LOOP('',(#429124,#429134,#429141,#429142)); +#429124 = ORIENTED_EDGE('',*,*,#429125,.T.); +#429125 = EDGE_CURVE('',#429126,#429128,#429130,.T.); +#429126 = VERTEX_POINT('',#429127); +#429127 = CARTESIAN_POINT('',(142.2,-119.65,-3.5E-02)); +#429128 = VERTEX_POINT('',#429129); +#429129 = CARTESIAN_POINT('',(142.2,-119.65,1.545)); +#429130 = LINE('',#429131,#429132); +#429131 = CARTESIAN_POINT('',(142.2,-119.65,-3.5E-02)); +#429132 = VECTOR('',#429133,1.); +#429133 = DIRECTION('',(0.,0.,1.)); +#429134 = ORIENTED_EDGE('',*,*,#429135,.T.); +#429135 = EDGE_CURVE('',#429128,#429128,#429136,.T.); +#429136 = CIRCLE('',#429137,0.15); +#429137 = AXIS2_PLACEMENT_3D('',#429138,#429139,#429140); +#429138 = CARTESIAN_POINT('',(142.2,-119.5,1.545)); +#429139 = DIRECTION('',(0.,0.,1.)); +#429140 = DIRECTION('',(-0.,-1.,0.)); +#429141 = ORIENTED_EDGE('',*,*,#429125,.F.); +#429142 = ORIENTED_EDGE('',*,*,#429143,.F.); +#429143 = EDGE_CURVE('',#429126,#429126,#429144,.T.); +#429144 = CIRCLE('',#429145,0.15); +#429145 = AXIS2_PLACEMENT_3D('',#429146,#429147,#429148); +#429146 = CARTESIAN_POINT('',(142.2,-119.5,-3.5E-02)); +#429147 = DIRECTION('',(0.,0.,1.)); +#429148 = DIRECTION('',(-0.,-1.,0.)); +#429149 = CYLINDRICAL_SURFACE('',#429150,0.15); +#429150 = AXIS2_PLACEMENT_3D('',#429151,#429152,#429153); +#429151 = CARTESIAN_POINT('',(142.2,-119.5,-3.5E-02)); +#429152 = DIRECTION('',(-0.,-0.,-1.)); +#429153 = DIRECTION('',(-0.,-1.,0.)); +#429154 = ADVANCED_FACE('',(#429155,#429158),#429169,.F.); +#429155 = FACE_BOUND('',#429156,.F.); +#429156 = EDGE_LOOP('',(#429157)); +#429157 = ORIENTED_EDGE('',*,*,#429143,.T.); +#429158 = FACE_BOUND('',#429159,.F.); +#429159 = EDGE_LOOP('',(#429160)); +#429160 = ORIENTED_EDGE('',*,*,#429161,.T.); +#429161 = EDGE_CURVE('',#429162,#429162,#429164,.T.); +#429162 = VERTEX_POINT('',#429163); +#429163 = CARTESIAN_POINT('',(142.2,-119.625,-3.5E-02)); +#429164 = CIRCLE('',#429165,0.125); +#429165 = AXIS2_PLACEMENT_3D('',#429166,#429167,#429168); +#429166 = CARTESIAN_POINT('',(142.2,-119.5,-3.5E-02)); +#429167 = DIRECTION('',(-0.,0.,-1.)); +#429168 = DIRECTION('',(-0.,-1.,0.)); +#429169 = PLANE('',#429170); +#429170 = AXIS2_PLACEMENT_3D('',#429171,#429172,#429173); +#429171 = CARTESIAN_POINT('',(142.2,-119.65,-3.5E-02)); +#429172 = DIRECTION('',(0.,0.,1.)); +#429173 = DIRECTION('',(1.,0.,-0.)); +#429174 = ADVANCED_FACE('',(#429175,#429178),#429189,.T.); +#429175 = FACE_BOUND('',#429176,.T.); +#429176 = EDGE_LOOP('',(#429177)); +#429177 = ORIENTED_EDGE('',*,*,#429135,.T.); +#429178 = FACE_BOUND('',#429179,.T.); +#429179 = EDGE_LOOP('',(#429180)); +#429180 = ORIENTED_EDGE('',*,*,#429181,.T.); +#429181 = EDGE_CURVE('',#429182,#429182,#429184,.T.); +#429182 = VERTEX_POINT('',#429183); +#429183 = CARTESIAN_POINT('',(142.2,-119.625,1.545)); +#429184 = CIRCLE('',#429185,0.125); +#429185 = AXIS2_PLACEMENT_3D('',#429186,#429187,#429188); +#429186 = CARTESIAN_POINT('',(142.2,-119.5,1.545)); +#429187 = DIRECTION('',(-0.,0.,-1.)); +#429188 = DIRECTION('',(-0.,-1.,0.)); +#429189 = PLANE('',#429190); +#429190 = AXIS2_PLACEMENT_3D('',#429191,#429192,#429193); +#429191 = CARTESIAN_POINT('',(142.2,-119.65,1.545)); +#429192 = DIRECTION('',(0.,0.,1.)); +#429193 = DIRECTION('',(1.,0.,-0.)); +#429194 = ADVANCED_FACE('',(#429195),#429206,.F.); +#429195 = FACE_BOUND('',#429196,.T.); +#429196 = EDGE_LOOP('',(#429197,#429198,#429204,#429205)); +#429197 = ORIENTED_EDGE('',*,*,#429161,.T.); +#429198 = ORIENTED_EDGE('',*,*,#429199,.T.); +#429199 = EDGE_CURVE('',#429162,#429182,#429200,.T.); +#429200 = LINE('',#429201,#429202); +#429201 = CARTESIAN_POINT('',(142.2,-119.625,-3.6E-02)); +#429202 = VECTOR('',#429203,1.); +#429203 = DIRECTION('',(0.,0.,1.)); +#429204 = ORIENTED_EDGE('',*,*,#429181,.F.); +#429205 = ORIENTED_EDGE('',*,*,#429199,.F.); +#429206 = CYLINDRICAL_SURFACE('',#429207,0.125); +#429207 = AXIS2_PLACEMENT_3D('',#429208,#429209,#429210); +#429208 = CARTESIAN_POINT('',(142.2,-119.5,-3.6E-02)); +#429209 = DIRECTION('',(-0.,-0.,-1.)); +#429210 = DIRECTION('',(-0.,-1.,0.)); +#429211 = MANIFOLD_SOLID_BREP('',#429212); +#429212 = CLOSED_SHELL('',(#429213,#429246,#429266,#429286)); +#429213 = ADVANCED_FACE('',(#429214),#429241,.T.); +#429214 = FACE_BOUND('',#429215,.F.); +#429215 = EDGE_LOOP('',(#429216,#429226,#429233,#429234)); +#429216 = ORIENTED_EDGE('',*,*,#429217,.T.); +#429217 = EDGE_CURVE('',#429218,#429220,#429222,.T.); +#429218 = VERTEX_POINT('',#429219); +#429219 = CARTESIAN_POINT('',(124.659759,-89.211229,-3.5E-02)); +#429220 = VERTEX_POINT('',#429221); +#429221 = CARTESIAN_POINT('',(124.659759,-89.211229,1.545)); +#429222 = LINE('',#429223,#429224); +#429223 = CARTESIAN_POINT('',(124.659759,-89.211229,-3.5E-02)); +#429224 = VECTOR('',#429225,1.); +#429225 = DIRECTION('',(0.,0.,1.)); +#429226 = ORIENTED_EDGE('',*,*,#429227,.T.); +#429227 = EDGE_CURVE('',#429220,#429220,#429228,.T.); +#429228 = CIRCLE('',#429229,0.15); +#429229 = AXIS2_PLACEMENT_3D('',#429230,#429231,#429232); +#429230 = CARTESIAN_POINT('',(124.659759,-89.061229,1.545)); +#429231 = DIRECTION('',(0.,0.,1.)); +#429232 = DIRECTION('',(-9.473903143469E-14,-1.,0.)); +#429233 = ORIENTED_EDGE('',*,*,#429217,.F.); +#429234 = ORIENTED_EDGE('',*,*,#429235,.F.); +#429235 = EDGE_CURVE('',#429218,#429218,#429236,.T.); +#429236 = CIRCLE('',#429237,0.15); +#429237 = AXIS2_PLACEMENT_3D('',#429238,#429239,#429240); +#429238 = CARTESIAN_POINT('',(124.659759,-89.061229,-3.5E-02)); +#429239 = DIRECTION('',(0.,0.,1.)); +#429240 = DIRECTION('',(-9.473903143469E-14,-1.,0.)); +#429241 = CYLINDRICAL_SURFACE('',#429242,0.15); +#429242 = AXIS2_PLACEMENT_3D('',#429243,#429244,#429245); +#429243 = CARTESIAN_POINT('',(124.659759,-89.061229,-3.5E-02)); +#429244 = DIRECTION('',(-0.,-0.,-1.)); +#429245 = DIRECTION('',(-9.473903143469E-14,-1.,0.)); +#429246 = ADVANCED_FACE('',(#429247,#429250),#429261,.F.); +#429247 = FACE_BOUND('',#429248,.F.); +#429248 = EDGE_LOOP('',(#429249)); +#429249 = ORIENTED_EDGE('',*,*,#429235,.T.); +#429250 = FACE_BOUND('',#429251,.F.); +#429251 = EDGE_LOOP('',(#429252)); +#429252 = ORIENTED_EDGE('',*,*,#429253,.T.); +#429253 = EDGE_CURVE('',#429254,#429254,#429256,.T.); +#429254 = VERTEX_POINT('',#429255); +#429255 = CARTESIAN_POINT('',(124.659759,-89.186229,-3.5E-02)); +#429256 = CIRCLE('',#429257,0.125); +#429257 = AXIS2_PLACEMENT_3D('',#429258,#429259,#429260); +#429258 = CARTESIAN_POINT('',(124.659759,-89.061229,-3.5E-02)); +#429259 = DIRECTION('',(-0.,0.,-1.)); +#429260 = DIRECTION('',(-0.,-1.,0.)); +#429261 = PLANE('',#429262); +#429262 = AXIS2_PLACEMENT_3D('',#429263,#429264,#429265); +#429263 = CARTESIAN_POINT('',(124.659759,-89.211229,-3.5E-02)); +#429264 = DIRECTION('',(0.,0.,1.)); +#429265 = DIRECTION('',(1.,0.,-0.)); +#429266 = ADVANCED_FACE('',(#429267,#429270),#429281,.T.); +#429267 = FACE_BOUND('',#429268,.T.); +#429268 = EDGE_LOOP('',(#429269)); +#429269 = ORIENTED_EDGE('',*,*,#429227,.T.); +#429270 = FACE_BOUND('',#429271,.T.); +#429271 = EDGE_LOOP('',(#429272)); +#429272 = ORIENTED_EDGE('',*,*,#429273,.T.); +#429273 = EDGE_CURVE('',#429274,#429274,#429276,.T.); +#429274 = VERTEX_POINT('',#429275); +#429275 = CARTESIAN_POINT('',(124.659759,-89.186229,1.545)); +#429276 = CIRCLE('',#429277,0.125); +#429277 = AXIS2_PLACEMENT_3D('',#429278,#429279,#429280); +#429278 = CARTESIAN_POINT('',(124.659759,-89.061229,1.545)); +#429279 = DIRECTION('',(-0.,0.,-1.)); +#429280 = DIRECTION('',(-0.,-1.,0.)); +#429281 = PLANE('',#429282); +#429282 = AXIS2_PLACEMENT_3D('',#429283,#429284,#429285); +#429283 = CARTESIAN_POINT('',(124.659759,-89.211229,1.545)); +#429284 = DIRECTION('',(0.,0.,1.)); +#429285 = DIRECTION('',(1.,0.,-0.)); +#429286 = ADVANCED_FACE('',(#429287),#429298,.F.); +#429287 = FACE_BOUND('',#429288,.T.); +#429288 = EDGE_LOOP('',(#429289,#429290,#429296,#429297)); +#429289 = ORIENTED_EDGE('',*,*,#429253,.T.); +#429290 = ORIENTED_EDGE('',*,*,#429291,.T.); +#429291 = EDGE_CURVE('',#429254,#429274,#429292,.T.); +#429292 = LINE('',#429293,#429294); +#429293 = CARTESIAN_POINT('',(124.659759,-89.186229,-3.6E-02)); +#429294 = VECTOR('',#429295,1.); +#429295 = DIRECTION('',(0.,0.,1.)); +#429296 = ORIENTED_EDGE('',*,*,#429273,.F.); +#429297 = ORIENTED_EDGE('',*,*,#429291,.F.); +#429298 = CYLINDRICAL_SURFACE('',#429299,0.125); +#429299 = AXIS2_PLACEMENT_3D('',#429300,#429301,#429302); +#429300 = CARTESIAN_POINT('',(124.659759,-89.061229,-3.6E-02)); +#429301 = DIRECTION('',(-0.,-0.,-1.)); +#429302 = DIRECTION('',(-0.,-1.,0.)); +#429303 = MANIFOLD_SOLID_BREP('',#429304); +#429304 = CLOSED_SHELL('',(#429305,#429338,#429358,#429378)); +#429305 = ADVANCED_FACE('',(#429306),#429333,.T.); +#429306 = FACE_BOUND('',#429307,.F.); +#429307 = EDGE_LOOP('',(#429308,#429318,#429325,#429326)); +#429308 = ORIENTED_EDGE('',*,*,#429309,.T.); +#429309 = EDGE_CURVE('',#429310,#429312,#429314,.T.); +#429310 = VERTEX_POINT('',#429311); +#429311 = CARTESIAN_POINT('',(136.2,-116.25,-3.5E-02)); +#429312 = VERTEX_POINT('',#429313); +#429313 = CARTESIAN_POINT('',(136.2,-116.25,1.545)); +#429314 = LINE('',#429315,#429316); +#429315 = CARTESIAN_POINT('',(136.2,-116.25,-3.5E-02)); +#429316 = VECTOR('',#429317,1.); +#429317 = DIRECTION('',(0.,0.,1.)); +#429318 = ORIENTED_EDGE('',*,*,#429319,.T.); +#429319 = EDGE_CURVE('',#429312,#429312,#429320,.T.); +#429320 = CIRCLE('',#429321,0.15); +#429321 = AXIS2_PLACEMENT_3D('',#429322,#429323,#429324); +#429322 = CARTESIAN_POINT('',(136.2,-116.1,1.545)); +#429323 = DIRECTION('',(0.,0.,1.)); +#429324 = DIRECTION('',(-0.,-1.,0.)); +#429325 = ORIENTED_EDGE('',*,*,#429309,.F.); +#429326 = ORIENTED_EDGE('',*,*,#429327,.F.); +#429327 = EDGE_CURVE('',#429310,#429310,#429328,.T.); +#429328 = CIRCLE('',#429329,0.15); +#429329 = AXIS2_PLACEMENT_3D('',#429330,#429331,#429332); +#429330 = CARTESIAN_POINT('',(136.2,-116.1,-3.5E-02)); +#429331 = DIRECTION('',(0.,0.,1.)); +#429332 = DIRECTION('',(-0.,-1.,0.)); +#429333 = CYLINDRICAL_SURFACE('',#429334,0.15); +#429334 = AXIS2_PLACEMENT_3D('',#429335,#429336,#429337); +#429335 = CARTESIAN_POINT('',(136.2,-116.1,-3.5E-02)); +#429336 = DIRECTION('',(-0.,-0.,-1.)); +#429337 = DIRECTION('',(-0.,-1.,0.)); +#429338 = ADVANCED_FACE('',(#429339,#429342),#429353,.F.); +#429339 = FACE_BOUND('',#429340,.F.); +#429340 = EDGE_LOOP('',(#429341)); +#429341 = ORIENTED_EDGE('',*,*,#429327,.T.); +#429342 = FACE_BOUND('',#429343,.F.); +#429343 = EDGE_LOOP('',(#429344)); +#429344 = ORIENTED_EDGE('',*,*,#429345,.T.); +#429345 = EDGE_CURVE('',#429346,#429346,#429348,.T.); +#429346 = VERTEX_POINT('',#429347); +#429347 = CARTESIAN_POINT('',(136.2,-116.225,-3.5E-02)); +#429348 = CIRCLE('',#429349,0.125); +#429349 = AXIS2_PLACEMENT_3D('',#429350,#429351,#429352); +#429350 = CARTESIAN_POINT('',(136.2,-116.1,-3.5E-02)); +#429351 = DIRECTION('',(-0.,0.,-1.)); +#429352 = DIRECTION('',(-0.,-1.,0.)); +#429353 = PLANE('',#429354); +#429354 = AXIS2_PLACEMENT_3D('',#429355,#429356,#429357); +#429355 = CARTESIAN_POINT('',(136.2,-116.25,-3.5E-02)); +#429356 = DIRECTION('',(0.,0.,1.)); +#429357 = DIRECTION('',(1.,0.,-0.)); +#429358 = ADVANCED_FACE('',(#429359,#429362),#429373,.T.); +#429359 = FACE_BOUND('',#429360,.T.); +#429360 = EDGE_LOOP('',(#429361)); +#429361 = ORIENTED_EDGE('',*,*,#429319,.T.); +#429362 = FACE_BOUND('',#429363,.T.); +#429363 = EDGE_LOOP('',(#429364)); +#429364 = ORIENTED_EDGE('',*,*,#429365,.T.); +#429365 = EDGE_CURVE('',#429366,#429366,#429368,.T.); +#429366 = VERTEX_POINT('',#429367); +#429367 = CARTESIAN_POINT('',(136.2,-116.225,1.545)); +#429368 = CIRCLE('',#429369,0.125); +#429369 = AXIS2_PLACEMENT_3D('',#429370,#429371,#429372); +#429370 = CARTESIAN_POINT('',(136.2,-116.1,1.545)); +#429371 = DIRECTION('',(-0.,0.,-1.)); +#429372 = DIRECTION('',(-0.,-1.,0.)); +#429373 = PLANE('',#429374); +#429374 = AXIS2_PLACEMENT_3D('',#429375,#429376,#429377); +#429375 = CARTESIAN_POINT('',(136.2,-116.25,1.545)); +#429376 = DIRECTION('',(0.,0.,1.)); +#429377 = DIRECTION('',(1.,0.,-0.)); +#429378 = ADVANCED_FACE('',(#429379),#429390,.F.); +#429379 = FACE_BOUND('',#429380,.T.); +#429380 = EDGE_LOOP('',(#429381,#429382,#429388,#429389)); +#429381 = ORIENTED_EDGE('',*,*,#429345,.T.); +#429382 = ORIENTED_EDGE('',*,*,#429383,.T.); +#429383 = EDGE_CURVE('',#429346,#429366,#429384,.T.); +#429384 = LINE('',#429385,#429386); +#429385 = CARTESIAN_POINT('',(136.2,-116.225,-3.6E-02)); +#429386 = VECTOR('',#429387,1.); +#429387 = DIRECTION('',(0.,0.,1.)); +#429388 = ORIENTED_EDGE('',*,*,#429365,.F.); +#429389 = ORIENTED_EDGE('',*,*,#429383,.F.); +#429390 = CYLINDRICAL_SURFACE('',#429391,0.125); +#429391 = AXIS2_PLACEMENT_3D('',#429392,#429393,#429394); +#429392 = CARTESIAN_POINT('',(136.2,-116.1,-3.6E-02)); +#429393 = DIRECTION('',(-0.,-0.,-1.)); +#429394 = DIRECTION('',(-0.,-1.,0.)); +#429395 = MANIFOLD_SOLID_BREP('',#429396); +#429396 = CLOSED_SHELL('',(#429397,#429430,#429450,#429470)); +#429397 = ADVANCED_FACE('',(#429398),#429425,.T.); +#429398 = FACE_BOUND('',#429399,.F.); +#429399 = EDGE_LOOP('',(#429400,#429410,#429417,#429418)); +#429400 = ORIENTED_EDGE('',*,*,#429401,.T.); +#429401 = EDGE_CURVE('',#429402,#429404,#429406,.T.); +#429402 = VERTEX_POINT('',#429403); +#429403 = CARTESIAN_POINT('',(143.6,-124.3,-3.5E-02)); +#429404 = VERTEX_POINT('',#429405); +#429405 = CARTESIAN_POINT('',(143.6,-124.3,1.545)); +#429406 = LINE('',#429407,#429408); +#429407 = CARTESIAN_POINT('',(143.6,-124.3,-3.5E-02)); +#429408 = VECTOR('',#429409,1.); +#429409 = DIRECTION('',(0.,0.,1.)); +#429410 = ORIENTED_EDGE('',*,*,#429411,.T.); +#429411 = EDGE_CURVE('',#429404,#429404,#429412,.T.); +#429412 = CIRCLE('',#429413,0.15); +#429413 = AXIS2_PLACEMENT_3D('',#429414,#429415,#429416); +#429414 = CARTESIAN_POINT('',(143.6,-124.15,1.545)); +#429415 = DIRECTION('',(0.,0.,1.)); +#429416 = DIRECTION('',(-0.,-1.,0.)); +#429417 = ORIENTED_EDGE('',*,*,#429401,.F.); +#429418 = ORIENTED_EDGE('',*,*,#429419,.F.); +#429419 = EDGE_CURVE('',#429402,#429402,#429420,.T.); +#429420 = CIRCLE('',#429421,0.15); +#429421 = AXIS2_PLACEMENT_3D('',#429422,#429423,#429424); +#429422 = CARTESIAN_POINT('',(143.6,-124.15,-3.5E-02)); +#429423 = DIRECTION('',(0.,0.,1.)); +#429424 = DIRECTION('',(-0.,-1.,0.)); +#429425 = CYLINDRICAL_SURFACE('',#429426,0.15); +#429426 = AXIS2_PLACEMENT_3D('',#429427,#429428,#429429); +#429427 = CARTESIAN_POINT('',(143.6,-124.15,-3.5E-02)); +#429428 = DIRECTION('',(-0.,-0.,-1.)); +#429429 = DIRECTION('',(-0.,-1.,0.)); +#429430 = ADVANCED_FACE('',(#429431,#429434),#429445,.F.); +#429431 = FACE_BOUND('',#429432,.F.); +#429432 = EDGE_LOOP('',(#429433)); +#429433 = ORIENTED_EDGE('',*,*,#429419,.T.); +#429434 = FACE_BOUND('',#429435,.F.); +#429435 = EDGE_LOOP('',(#429436)); +#429436 = ORIENTED_EDGE('',*,*,#429437,.T.); +#429437 = EDGE_CURVE('',#429438,#429438,#429440,.T.); +#429438 = VERTEX_POINT('',#429439); +#429439 = CARTESIAN_POINT('',(143.6,-124.275,-3.5E-02)); +#429440 = CIRCLE('',#429441,0.125); +#429441 = AXIS2_PLACEMENT_3D('',#429442,#429443,#429444); +#429442 = CARTESIAN_POINT('',(143.6,-124.15,-3.5E-02)); +#429443 = DIRECTION('',(-0.,0.,-1.)); +#429444 = DIRECTION('',(-0.,-1.,0.)); +#429445 = PLANE('',#429446); +#429446 = AXIS2_PLACEMENT_3D('',#429447,#429448,#429449); +#429447 = CARTESIAN_POINT('',(143.6,-124.3,-3.5E-02)); +#429448 = DIRECTION('',(0.,0.,1.)); +#429449 = DIRECTION('',(1.,0.,-0.)); +#429450 = ADVANCED_FACE('',(#429451,#429454),#429465,.T.); +#429451 = FACE_BOUND('',#429452,.T.); +#429452 = EDGE_LOOP('',(#429453)); +#429453 = ORIENTED_EDGE('',*,*,#429411,.T.); +#429454 = FACE_BOUND('',#429455,.T.); +#429455 = EDGE_LOOP('',(#429456)); +#429456 = ORIENTED_EDGE('',*,*,#429457,.T.); +#429457 = EDGE_CURVE('',#429458,#429458,#429460,.T.); +#429458 = VERTEX_POINT('',#429459); +#429459 = CARTESIAN_POINT('',(143.6,-124.275,1.545)); +#429460 = CIRCLE('',#429461,0.125); +#429461 = AXIS2_PLACEMENT_3D('',#429462,#429463,#429464); +#429462 = CARTESIAN_POINT('',(143.6,-124.15,1.545)); +#429463 = DIRECTION('',(-0.,0.,-1.)); +#429464 = DIRECTION('',(-0.,-1.,0.)); +#429465 = PLANE('',#429466); +#429466 = AXIS2_PLACEMENT_3D('',#429467,#429468,#429469); +#429467 = CARTESIAN_POINT('',(143.6,-124.3,1.545)); +#429468 = DIRECTION('',(0.,0.,1.)); +#429469 = DIRECTION('',(1.,0.,-0.)); +#429470 = ADVANCED_FACE('',(#429471),#429482,.F.); +#429471 = FACE_BOUND('',#429472,.T.); +#429472 = EDGE_LOOP('',(#429473,#429474,#429480,#429481)); +#429473 = ORIENTED_EDGE('',*,*,#429437,.T.); +#429474 = ORIENTED_EDGE('',*,*,#429475,.T.); +#429475 = EDGE_CURVE('',#429438,#429458,#429476,.T.); +#429476 = LINE('',#429477,#429478); +#429477 = CARTESIAN_POINT('',(143.6,-124.275,-3.6E-02)); +#429478 = VECTOR('',#429479,1.); +#429479 = DIRECTION('',(0.,0.,1.)); +#429480 = ORIENTED_EDGE('',*,*,#429457,.F.); +#429481 = ORIENTED_EDGE('',*,*,#429475,.F.); +#429482 = CYLINDRICAL_SURFACE('',#429483,0.125); +#429483 = AXIS2_PLACEMENT_3D('',#429484,#429485,#429486); +#429484 = CARTESIAN_POINT('',(143.6,-124.15,-3.6E-02)); +#429485 = DIRECTION('',(-0.,-0.,-1.)); +#429486 = DIRECTION('',(-0.,-1.,0.)); +#429487 = MANIFOLD_SOLID_BREP('',#429488); +#429488 = CLOSED_SHELL('',(#429489,#429522,#429542,#429562)); +#429489 = ADVANCED_FACE('',(#429490),#429517,.T.); +#429490 = FACE_BOUND('',#429491,.F.); +#429491 = EDGE_LOOP('',(#429492,#429502,#429509,#429510)); +#429492 = ORIENTED_EDGE('',*,*,#429493,.T.); +#429493 = EDGE_CURVE('',#429494,#429496,#429498,.T.); +#429494 = VERTEX_POINT('',#429495); +#429495 = CARTESIAN_POINT('',(136.275,-108.35,-3.5E-02)); +#429496 = VERTEX_POINT('',#429497); +#429497 = CARTESIAN_POINT('',(136.275,-108.35,1.545)); +#429498 = LINE('',#429499,#429500); +#429499 = CARTESIAN_POINT('',(136.275,-108.35,-3.5E-02)); +#429500 = VECTOR('',#429501,1.); +#429501 = DIRECTION('',(0.,0.,1.)); +#429502 = ORIENTED_EDGE('',*,*,#429503,.T.); +#429503 = EDGE_CURVE('',#429496,#429496,#429504,.T.); +#429504 = CIRCLE('',#429505,0.15); +#429505 = AXIS2_PLACEMENT_3D('',#429506,#429507,#429508); +#429506 = CARTESIAN_POINT('',(136.275,-108.2,1.545)); +#429507 = DIRECTION('',(0.,0.,1.)); +#429508 = DIRECTION('',(-0.,-1.,0.)); +#429509 = ORIENTED_EDGE('',*,*,#429493,.F.); +#429510 = ORIENTED_EDGE('',*,*,#429511,.F.); +#429511 = EDGE_CURVE('',#429494,#429494,#429512,.T.); +#429512 = CIRCLE('',#429513,0.15); +#429513 = AXIS2_PLACEMENT_3D('',#429514,#429515,#429516); +#429514 = CARTESIAN_POINT('',(136.275,-108.2,-3.5E-02)); +#429515 = DIRECTION('',(0.,0.,1.)); +#429516 = DIRECTION('',(-0.,-1.,0.)); +#429517 = CYLINDRICAL_SURFACE('',#429518,0.15); +#429518 = AXIS2_PLACEMENT_3D('',#429519,#429520,#429521); +#429519 = CARTESIAN_POINT('',(136.275,-108.2,-3.5E-02)); +#429520 = DIRECTION('',(-0.,-0.,-1.)); +#429521 = DIRECTION('',(-0.,-1.,0.)); +#429522 = ADVANCED_FACE('',(#429523,#429526),#429537,.F.); +#429523 = FACE_BOUND('',#429524,.F.); +#429524 = EDGE_LOOP('',(#429525)); +#429525 = ORIENTED_EDGE('',*,*,#429511,.T.); +#429526 = FACE_BOUND('',#429527,.F.); +#429527 = EDGE_LOOP('',(#429528)); +#429528 = ORIENTED_EDGE('',*,*,#429529,.T.); +#429529 = EDGE_CURVE('',#429530,#429530,#429532,.T.); +#429530 = VERTEX_POINT('',#429531); +#429531 = CARTESIAN_POINT('',(136.275,-108.325,-3.5E-02)); +#429532 = CIRCLE('',#429533,0.125); +#429533 = AXIS2_PLACEMENT_3D('',#429534,#429535,#429536); +#429534 = CARTESIAN_POINT('',(136.275,-108.2,-3.5E-02)); +#429535 = DIRECTION('',(-0.,0.,-1.)); +#429536 = DIRECTION('',(-0.,-1.,0.)); +#429537 = PLANE('',#429538); +#429538 = AXIS2_PLACEMENT_3D('',#429539,#429540,#429541); +#429539 = CARTESIAN_POINT('',(136.275,-108.35,-3.5E-02)); +#429540 = DIRECTION('',(0.,0.,1.)); +#429541 = DIRECTION('',(1.,0.,-0.)); +#429542 = ADVANCED_FACE('',(#429543,#429546),#429557,.T.); +#429543 = FACE_BOUND('',#429544,.T.); +#429544 = EDGE_LOOP('',(#429545)); +#429545 = ORIENTED_EDGE('',*,*,#429503,.T.); +#429546 = FACE_BOUND('',#429547,.T.); +#429547 = EDGE_LOOP('',(#429548)); +#429548 = ORIENTED_EDGE('',*,*,#429549,.T.); +#429549 = EDGE_CURVE('',#429550,#429550,#429552,.T.); +#429550 = VERTEX_POINT('',#429551); +#429551 = CARTESIAN_POINT('',(136.275,-108.325,1.545)); +#429552 = CIRCLE('',#429553,0.125); +#429553 = AXIS2_PLACEMENT_3D('',#429554,#429555,#429556); +#429554 = CARTESIAN_POINT('',(136.275,-108.2,1.545)); +#429555 = DIRECTION('',(-0.,0.,-1.)); +#429556 = DIRECTION('',(-0.,-1.,0.)); +#429557 = PLANE('',#429558); +#429558 = AXIS2_PLACEMENT_3D('',#429559,#429560,#429561); +#429559 = CARTESIAN_POINT('',(136.275,-108.35,1.545)); +#429560 = DIRECTION('',(0.,0.,1.)); +#429561 = DIRECTION('',(1.,0.,-0.)); +#429562 = ADVANCED_FACE('',(#429563),#429574,.F.); +#429563 = FACE_BOUND('',#429564,.T.); +#429564 = EDGE_LOOP('',(#429565,#429566,#429572,#429573)); +#429565 = ORIENTED_EDGE('',*,*,#429529,.T.); +#429566 = ORIENTED_EDGE('',*,*,#429567,.T.); +#429567 = EDGE_CURVE('',#429530,#429550,#429568,.T.); +#429568 = LINE('',#429569,#429570); +#429569 = CARTESIAN_POINT('',(136.275,-108.325,-3.6E-02)); +#429570 = VECTOR('',#429571,1.); +#429571 = DIRECTION('',(0.,0.,1.)); +#429572 = ORIENTED_EDGE('',*,*,#429549,.F.); +#429573 = ORIENTED_EDGE('',*,*,#429567,.F.); +#429574 = CYLINDRICAL_SURFACE('',#429575,0.125); +#429575 = AXIS2_PLACEMENT_3D('',#429576,#429577,#429578); +#429576 = CARTESIAN_POINT('',(136.275,-108.2,-3.6E-02)); +#429577 = DIRECTION('',(-0.,-0.,-1.)); +#429578 = DIRECTION('',(-0.,-1.,0.)); +#429579 = MANIFOLD_SOLID_BREP('',#429580); +#429580 = CLOSED_SHELL('',(#429581,#429614,#429634,#429654)); +#429581 = ADVANCED_FACE('',(#429582),#429609,.T.); +#429582 = FACE_BOUND('',#429583,.F.); +#429583 = EDGE_LOOP('',(#429584,#429594,#429601,#429602)); +#429584 = ORIENTED_EDGE('',*,*,#429585,.T.); +#429585 = EDGE_CURVE('',#429586,#429588,#429590,.T.); +#429586 = VERTEX_POINT('',#429587); +#429587 = CARTESIAN_POINT('',(149.35,-130.91,-3.5E-02)); +#429588 = VERTEX_POINT('',#429589); +#429589 = CARTESIAN_POINT('',(149.35,-130.91,1.545)); +#429590 = LINE('',#429591,#429592); +#429591 = CARTESIAN_POINT('',(149.35,-130.91,-3.5E-02)); +#429592 = VECTOR('',#429593,1.); +#429593 = DIRECTION('',(0.,0.,1.)); +#429594 = ORIENTED_EDGE('',*,*,#429595,.T.); +#429595 = EDGE_CURVE('',#429588,#429588,#429596,.T.); +#429596 = CIRCLE('',#429597,0.15); +#429597 = AXIS2_PLACEMENT_3D('',#429598,#429599,#429600); +#429598 = CARTESIAN_POINT('',(149.35,-130.76,1.545)); +#429599 = DIRECTION('',(0.,0.,1.)); +#429600 = DIRECTION('',(-0.,-1.,0.)); +#429601 = ORIENTED_EDGE('',*,*,#429585,.F.); +#429602 = ORIENTED_EDGE('',*,*,#429603,.F.); +#429603 = EDGE_CURVE('',#429586,#429586,#429604,.T.); +#429604 = CIRCLE('',#429605,0.15); +#429605 = AXIS2_PLACEMENT_3D('',#429606,#429607,#429608); +#429606 = CARTESIAN_POINT('',(149.35,-130.76,-3.5E-02)); +#429607 = DIRECTION('',(0.,0.,1.)); +#429608 = DIRECTION('',(-0.,-1.,0.)); +#429609 = CYLINDRICAL_SURFACE('',#429610,0.15); +#429610 = AXIS2_PLACEMENT_3D('',#429611,#429612,#429613); +#429611 = CARTESIAN_POINT('',(149.35,-130.76,-3.5E-02)); +#429612 = DIRECTION('',(-0.,-0.,-1.)); +#429613 = DIRECTION('',(-0.,-1.,0.)); +#429614 = ADVANCED_FACE('',(#429615,#429618),#429629,.F.); +#429615 = FACE_BOUND('',#429616,.F.); +#429616 = EDGE_LOOP('',(#429617)); +#429617 = ORIENTED_EDGE('',*,*,#429603,.T.); +#429618 = FACE_BOUND('',#429619,.F.); +#429619 = EDGE_LOOP('',(#429620)); +#429620 = ORIENTED_EDGE('',*,*,#429621,.T.); +#429621 = EDGE_CURVE('',#429622,#429622,#429624,.T.); +#429622 = VERTEX_POINT('',#429623); +#429623 = CARTESIAN_POINT('',(149.35,-130.885,-3.5E-02)); +#429624 = CIRCLE('',#429625,0.125); +#429625 = AXIS2_PLACEMENT_3D('',#429626,#429627,#429628); +#429626 = CARTESIAN_POINT('',(149.35,-130.76,-3.5E-02)); +#429627 = DIRECTION('',(-0.,0.,-1.)); +#429628 = DIRECTION('',(-0.,-1.,0.)); +#429629 = PLANE('',#429630); +#429630 = AXIS2_PLACEMENT_3D('',#429631,#429632,#429633); +#429631 = CARTESIAN_POINT('',(149.35,-130.91,-3.5E-02)); +#429632 = DIRECTION('',(0.,0.,1.)); +#429633 = DIRECTION('',(1.,0.,-0.)); +#429634 = ADVANCED_FACE('',(#429635,#429638),#429649,.T.); +#429635 = FACE_BOUND('',#429636,.T.); +#429636 = EDGE_LOOP('',(#429637)); +#429637 = ORIENTED_EDGE('',*,*,#429595,.T.); +#429638 = FACE_BOUND('',#429639,.T.); +#429639 = EDGE_LOOP('',(#429640)); +#429640 = ORIENTED_EDGE('',*,*,#429641,.T.); +#429641 = EDGE_CURVE('',#429642,#429642,#429644,.T.); +#429642 = VERTEX_POINT('',#429643); +#429643 = CARTESIAN_POINT('',(149.35,-130.885,1.545)); +#429644 = CIRCLE('',#429645,0.125); +#429645 = AXIS2_PLACEMENT_3D('',#429646,#429647,#429648); +#429646 = CARTESIAN_POINT('',(149.35,-130.76,1.545)); +#429647 = DIRECTION('',(-0.,0.,-1.)); +#429648 = DIRECTION('',(-0.,-1.,0.)); +#429649 = PLANE('',#429650); +#429650 = AXIS2_PLACEMENT_3D('',#429651,#429652,#429653); +#429651 = CARTESIAN_POINT('',(149.35,-130.91,1.545)); +#429652 = DIRECTION('',(0.,0.,1.)); +#429653 = DIRECTION('',(1.,0.,-0.)); +#429654 = ADVANCED_FACE('',(#429655),#429666,.F.); +#429655 = FACE_BOUND('',#429656,.T.); +#429656 = EDGE_LOOP('',(#429657,#429658,#429664,#429665)); +#429657 = ORIENTED_EDGE('',*,*,#429621,.T.); +#429658 = ORIENTED_EDGE('',*,*,#429659,.T.); +#429659 = EDGE_CURVE('',#429622,#429642,#429660,.T.); +#429660 = LINE('',#429661,#429662); +#429661 = CARTESIAN_POINT('',(149.35,-130.885,-3.6E-02)); +#429662 = VECTOR('',#429663,1.); +#429663 = DIRECTION('',(0.,0.,1.)); +#429664 = ORIENTED_EDGE('',*,*,#429641,.F.); +#429665 = ORIENTED_EDGE('',*,*,#429659,.F.); +#429666 = CYLINDRICAL_SURFACE('',#429667,0.125); +#429667 = AXIS2_PLACEMENT_3D('',#429668,#429669,#429670); +#429668 = CARTESIAN_POINT('',(149.35,-130.76,-3.6E-02)); +#429669 = DIRECTION('',(-0.,-0.,-1.)); +#429670 = DIRECTION('',(-0.,-1.,0.)); +#429671 = MANIFOLD_SOLID_BREP('',#429672); +#429672 = CLOSED_SHELL('',(#429673,#429706,#429726,#429746)); +#429673 = ADVANCED_FACE('',(#429674),#429701,.T.); +#429674 = FACE_BOUND('',#429675,.F.); +#429675 = EDGE_LOOP('',(#429676,#429686,#429693,#429694)); +#429676 = ORIENTED_EDGE('',*,*,#429677,.T.); +#429677 = EDGE_CURVE('',#429678,#429680,#429682,.T.); +#429678 = VERTEX_POINT('',#429679); +#429679 = CARTESIAN_POINT('',(139.,-119.274499,-3.5E-02)); +#429680 = VERTEX_POINT('',#429681); +#429681 = CARTESIAN_POINT('',(139.,-119.274499,1.545)); +#429682 = LINE('',#429683,#429684); +#429683 = CARTESIAN_POINT('',(139.,-119.274499,-3.5E-02)); +#429684 = VECTOR('',#429685,1.); +#429685 = DIRECTION('',(0.,0.,1.)); +#429686 = ORIENTED_EDGE('',*,*,#429687,.T.); +#429687 = EDGE_CURVE('',#429680,#429680,#429688,.T.); +#429688 = CIRCLE('',#429689,0.15); +#429689 = AXIS2_PLACEMENT_3D('',#429690,#429691,#429692); +#429690 = CARTESIAN_POINT('',(139.,-119.124499,1.545)); +#429691 = DIRECTION('',(0.,0.,1.)); +#429692 = DIRECTION('',(-0.,-1.,0.)); +#429693 = ORIENTED_EDGE('',*,*,#429677,.F.); +#429694 = ORIENTED_EDGE('',*,*,#429695,.F.); +#429695 = EDGE_CURVE('',#429678,#429678,#429696,.T.); +#429696 = CIRCLE('',#429697,0.15); +#429697 = AXIS2_PLACEMENT_3D('',#429698,#429699,#429700); +#429698 = CARTESIAN_POINT('',(139.,-119.124499,-3.5E-02)); +#429699 = DIRECTION('',(0.,0.,1.)); +#429700 = DIRECTION('',(-0.,-1.,0.)); +#429701 = CYLINDRICAL_SURFACE('',#429702,0.15); +#429702 = AXIS2_PLACEMENT_3D('',#429703,#429704,#429705); +#429703 = CARTESIAN_POINT('',(139.,-119.124499,-3.5E-02)); +#429704 = DIRECTION('',(-0.,-0.,-1.)); +#429705 = DIRECTION('',(-0.,-1.,0.)); +#429706 = ADVANCED_FACE('',(#429707,#429710),#429721,.F.); +#429707 = FACE_BOUND('',#429708,.F.); +#429708 = EDGE_LOOP('',(#429709)); +#429709 = ORIENTED_EDGE('',*,*,#429695,.T.); +#429710 = FACE_BOUND('',#429711,.F.); +#429711 = EDGE_LOOP('',(#429712)); +#429712 = ORIENTED_EDGE('',*,*,#429713,.T.); +#429713 = EDGE_CURVE('',#429714,#429714,#429716,.T.); +#429714 = VERTEX_POINT('',#429715); +#429715 = CARTESIAN_POINT('',(139.,-119.249499,-3.5E-02)); +#429716 = CIRCLE('',#429717,0.125); +#429717 = AXIS2_PLACEMENT_3D('',#429718,#429719,#429720); +#429718 = CARTESIAN_POINT('',(139.,-119.124499,-3.5E-02)); +#429719 = DIRECTION('',(-0.,0.,-1.)); +#429720 = DIRECTION('',(-0.,-1.,0.)); +#429721 = PLANE('',#429722); +#429722 = AXIS2_PLACEMENT_3D('',#429723,#429724,#429725); +#429723 = CARTESIAN_POINT('',(139.,-119.274499,-3.5E-02)); +#429724 = DIRECTION('',(0.,0.,1.)); +#429725 = DIRECTION('',(1.,0.,-0.)); +#429726 = ADVANCED_FACE('',(#429727,#429730),#429741,.T.); +#429727 = FACE_BOUND('',#429728,.T.); +#429728 = EDGE_LOOP('',(#429729)); +#429729 = ORIENTED_EDGE('',*,*,#429687,.T.); +#429730 = FACE_BOUND('',#429731,.T.); +#429731 = EDGE_LOOP('',(#429732)); +#429732 = ORIENTED_EDGE('',*,*,#429733,.T.); +#429733 = EDGE_CURVE('',#429734,#429734,#429736,.T.); +#429734 = VERTEX_POINT('',#429735); +#429735 = CARTESIAN_POINT('',(139.,-119.249499,1.545)); +#429736 = CIRCLE('',#429737,0.125); +#429737 = AXIS2_PLACEMENT_3D('',#429738,#429739,#429740); +#429738 = CARTESIAN_POINT('',(139.,-119.124499,1.545)); +#429739 = DIRECTION('',(-0.,0.,-1.)); +#429740 = DIRECTION('',(-0.,-1.,0.)); +#429741 = PLANE('',#429742); +#429742 = AXIS2_PLACEMENT_3D('',#429743,#429744,#429745); +#429743 = CARTESIAN_POINT('',(139.,-119.274499,1.545)); +#429744 = DIRECTION('',(0.,0.,1.)); +#429745 = DIRECTION('',(1.,0.,-0.)); +#429746 = ADVANCED_FACE('',(#429747),#429758,.F.); +#429747 = FACE_BOUND('',#429748,.T.); +#429748 = EDGE_LOOP('',(#429749,#429750,#429756,#429757)); +#429749 = ORIENTED_EDGE('',*,*,#429713,.T.); +#429750 = ORIENTED_EDGE('',*,*,#429751,.T.); +#429751 = EDGE_CURVE('',#429714,#429734,#429752,.T.); +#429752 = LINE('',#429753,#429754); +#429753 = CARTESIAN_POINT('',(139.,-119.249499,-3.6E-02)); +#429754 = VECTOR('',#429755,1.); +#429755 = DIRECTION('',(0.,0.,1.)); +#429756 = ORIENTED_EDGE('',*,*,#429733,.F.); +#429757 = ORIENTED_EDGE('',*,*,#429751,.F.); +#429758 = CYLINDRICAL_SURFACE('',#429759,0.125); +#429759 = AXIS2_PLACEMENT_3D('',#429760,#429761,#429762); +#429760 = CARTESIAN_POINT('',(139.,-119.124499,-3.6E-02)); +#429761 = DIRECTION('',(-0.,-0.,-1.)); +#429762 = DIRECTION('',(-0.,-1.,0.)); +#429763 = MANIFOLD_SOLID_BREP('',#429764); +#429764 = CLOSED_SHELL('',(#429765,#429798,#429818,#429838)); +#429765 = ADVANCED_FACE('',(#429766),#429793,.T.); +#429766 = FACE_BOUND('',#429767,.F.); +#429767 = EDGE_LOOP('',(#429768,#429778,#429785,#429786)); +#429768 = ORIENTED_EDGE('',*,*,#429769,.T.); +#429769 = EDGE_CURVE('',#429770,#429772,#429774,.T.); +#429770 = VERTEX_POINT('',#429771); +#429771 = CARTESIAN_POINT('',(145.4,-71.1,-3.5E-02)); +#429772 = VERTEX_POINT('',#429773); +#429773 = CARTESIAN_POINT('',(145.4,-71.1,1.545)); +#429774 = LINE('',#429775,#429776); +#429775 = CARTESIAN_POINT('',(145.4,-71.1,-3.5E-02)); +#429776 = VECTOR('',#429777,1.); +#429777 = DIRECTION('',(0.,0.,1.)); +#429778 = ORIENTED_EDGE('',*,*,#429779,.T.); +#429779 = EDGE_CURVE('',#429772,#429772,#429780,.T.); +#429780 = CIRCLE('',#429781,0.15); +#429781 = AXIS2_PLACEMENT_3D('',#429782,#429783,#429784); +#429782 = CARTESIAN_POINT('',(145.4,-70.95,1.545)); +#429783 = DIRECTION('',(0.,0.,1.)); +#429784 = DIRECTION('',(-0.,-1.,0.)); +#429785 = ORIENTED_EDGE('',*,*,#429769,.F.); +#429786 = ORIENTED_EDGE('',*,*,#429787,.F.); +#429787 = EDGE_CURVE('',#429770,#429770,#429788,.T.); +#429788 = CIRCLE('',#429789,0.15); +#429789 = AXIS2_PLACEMENT_3D('',#429790,#429791,#429792); +#429790 = CARTESIAN_POINT('',(145.4,-70.95,-3.5E-02)); +#429791 = DIRECTION('',(0.,0.,1.)); +#429792 = DIRECTION('',(-0.,-1.,0.)); +#429793 = CYLINDRICAL_SURFACE('',#429794,0.15); +#429794 = AXIS2_PLACEMENT_3D('',#429795,#429796,#429797); +#429795 = CARTESIAN_POINT('',(145.4,-70.95,-3.5E-02)); +#429796 = DIRECTION('',(-0.,-0.,-1.)); +#429797 = DIRECTION('',(-0.,-1.,0.)); +#429798 = ADVANCED_FACE('',(#429799,#429802),#429813,.F.); +#429799 = FACE_BOUND('',#429800,.F.); +#429800 = EDGE_LOOP('',(#429801)); +#429801 = ORIENTED_EDGE('',*,*,#429787,.T.); +#429802 = FACE_BOUND('',#429803,.F.); +#429803 = EDGE_LOOP('',(#429804)); +#429804 = ORIENTED_EDGE('',*,*,#429805,.T.); +#429805 = EDGE_CURVE('',#429806,#429806,#429808,.T.); +#429806 = VERTEX_POINT('',#429807); +#429807 = CARTESIAN_POINT('',(145.4,-71.075,-3.5E-02)); +#429808 = CIRCLE('',#429809,0.125); +#429809 = AXIS2_PLACEMENT_3D('',#429810,#429811,#429812); +#429810 = CARTESIAN_POINT('',(145.4,-70.95,-3.5E-02)); +#429811 = DIRECTION('',(-0.,0.,-1.)); +#429812 = DIRECTION('',(-0.,-1.,0.)); +#429813 = PLANE('',#429814); +#429814 = AXIS2_PLACEMENT_3D('',#429815,#429816,#429817); +#429815 = CARTESIAN_POINT('',(145.4,-71.1,-3.5E-02)); +#429816 = DIRECTION('',(0.,0.,1.)); +#429817 = DIRECTION('',(1.,0.,-0.)); +#429818 = ADVANCED_FACE('',(#429819,#429822),#429833,.T.); +#429819 = FACE_BOUND('',#429820,.T.); +#429820 = EDGE_LOOP('',(#429821)); +#429821 = ORIENTED_EDGE('',*,*,#429779,.T.); +#429822 = FACE_BOUND('',#429823,.T.); +#429823 = EDGE_LOOP('',(#429824)); +#429824 = ORIENTED_EDGE('',*,*,#429825,.T.); +#429825 = EDGE_CURVE('',#429826,#429826,#429828,.T.); +#429826 = VERTEX_POINT('',#429827); +#429827 = CARTESIAN_POINT('',(145.4,-71.075,1.545)); +#429828 = CIRCLE('',#429829,0.125); +#429829 = AXIS2_PLACEMENT_3D('',#429830,#429831,#429832); +#429830 = CARTESIAN_POINT('',(145.4,-70.95,1.545)); +#429831 = DIRECTION('',(-0.,0.,-1.)); +#429832 = DIRECTION('',(-0.,-1.,0.)); +#429833 = PLANE('',#429834); +#429834 = AXIS2_PLACEMENT_3D('',#429835,#429836,#429837); +#429835 = CARTESIAN_POINT('',(145.4,-71.1,1.545)); +#429836 = DIRECTION('',(0.,0.,1.)); +#429837 = DIRECTION('',(1.,0.,-0.)); +#429838 = ADVANCED_FACE('',(#429839),#429850,.F.); +#429839 = FACE_BOUND('',#429840,.T.); +#429840 = EDGE_LOOP('',(#429841,#429842,#429848,#429849)); +#429841 = ORIENTED_EDGE('',*,*,#429805,.T.); +#429842 = ORIENTED_EDGE('',*,*,#429843,.T.); +#429843 = EDGE_CURVE('',#429806,#429826,#429844,.T.); +#429844 = LINE('',#429845,#429846); +#429845 = CARTESIAN_POINT('',(145.4,-71.075,-3.6E-02)); +#429846 = VECTOR('',#429847,1.); +#429847 = DIRECTION('',(0.,0.,1.)); +#429848 = ORIENTED_EDGE('',*,*,#429825,.F.); +#429849 = ORIENTED_EDGE('',*,*,#429843,.F.); +#429850 = CYLINDRICAL_SURFACE('',#429851,0.125); +#429851 = AXIS2_PLACEMENT_3D('',#429852,#429853,#429854); +#429852 = CARTESIAN_POINT('',(145.4,-70.95,-3.6E-02)); +#429853 = DIRECTION('',(-0.,-0.,-1.)); +#429854 = DIRECTION('',(-0.,-1.,0.)); +#429855 = MANIFOLD_SOLID_BREP('',#429856); +#429856 = CLOSED_SHELL('',(#429857,#429890,#429910,#429930)); +#429857 = ADVANCED_FACE('',(#429858),#429885,.T.); +#429858 = FACE_BOUND('',#429859,.F.); +#429859 = EDGE_LOOP('',(#429860,#429870,#429877,#429878)); +#429860 = ORIENTED_EDGE('',*,*,#429861,.T.); +#429861 = EDGE_CURVE('',#429862,#429864,#429866,.T.); +#429862 = VERTEX_POINT('',#429863); +#429863 = CARTESIAN_POINT('',(131.1,-87.5,-3.5E-02)); +#429864 = VERTEX_POINT('',#429865); +#429865 = CARTESIAN_POINT('',(131.1,-87.5,1.545)); +#429866 = LINE('',#429867,#429868); +#429867 = CARTESIAN_POINT('',(131.1,-87.5,-3.5E-02)); +#429868 = VECTOR('',#429869,1.); +#429869 = DIRECTION('',(0.,0.,1.)); +#429870 = ORIENTED_EDGE('',*,*,#429871,.T.); +#429871 = EDGE_CURVE('',#429864,#429864,#429872,.T.); +#429872 = CIRCLE('',#429873,0.15); +#429873 = AXIS2_PLACEMENT_3D('',#429874,#429875,#429876); +#429874 = CARTESIAN_POINT('',(131.1,-87.35,1.545)); +#429875 = DIRECTION('',(0.,0.,1.)); +#429876 = DIRECTION('',(-0.,-1.,0.)); +#429877 = ORIENTED_EDGE('',*,*,#429861,.F.); +#429878 = ORIENTED_EDGE('',*,*,#429879,.F.); +#429879 = EDGE_CURVE('',#429862,#429862,#429880,.T.); +#429880 = CIRCLE('',#429881,0.15); +#429881 = AXIS2_PLACEMENT_3D('',#429882,#429883,#429884); +#429882 = CARTESIAN_POINT('',(131.1,-87.35,-3.5E-02)); +#429883 = DIRECTION('',(0.,0.,1.)); +#429884 = DIRECTION('',(-0.,-1.,0.)); +#429885 = CYLINDRICAL_SURFACE('',#429886,0.15); +#429886 = AXIS2_PLACEMENT_3D('',#429887,#429888,#429889); +#429887 = CARTESIAN_POINT('',(131.1,-87.35,-3.5E-02)); +#429888 = DIRECTION('',(-0.,-0.,-1.)); +#429889 = DIRECTION('',(-0.,-1.,0.)); +#429890 = ADVANCED_FACE('',(#429891,#429894),#429905,.F.); +#429891 = FACE_BOUND('',#429892,.F.); +#429892 = EDGE_LOOP('',(#429893)); +#429893 = ORIENTED_EDGE('',*,*,#429879,.T.); +#429894 = FACE_BOUND('',#429895,.F.); +#429895 = EDGE_LOOP('',(#429896)); +#429896 = ORIENTED_EDGE('',*,*,#429897,.T.); +#429897 = EDGE_CURVE('',#429898,#429898,#429900,.T.); +#429898 = VERTEX_POINT('',#429899); +#429899 = CARTESIAN_POINT('',(131.1,-87.475,-3.5E-02)); +#429900 = CIRCLE('',#429901,0.125); +#429901 = AXIS2_PLACEMENT_3D('',#429902,#429903,#429904); +#429902 = CARTESIAN_POINT('',(131.1,-87.35,-3.5E-02)); +#429903 = DIRECTION('',(-0.,0.,-1.)); +#429904 = DIRECTION('',(-0.,-1.,0.)); +#429905 = PLANE('',#429906); +#429906 = AXIS2_PLACEMENT_3D('',#429907,#429908,#429909); +#429907 = CARTESIAN_POINT('',(131.1,-87.5,-3.5E-02)); +#429908 = DIRECTION('',(0.,0.,1.)); +#429909 = DIRECTION('',(1.,0.,-0.)); +#429910 = ADVANCED_FACE('',(#429911,#429914),#429925,.T.); +#429911 = FACE_BOUND('',#429912,.T.); +#429912 = EDGE_LOOP('',(#429913)); +#429913 = ORIENTED_EDGE('',*,*,#429871,.T.); +#429914 = FACE_BOUND('',#429915,.T.); +#429915 = EDGE_LOOP('',(#429916)); +#429916 = ORIENTED_EDGE('',*,*,#429917,.T.); +#429917 = EDGE_CURVE('',#429918,#429918,#429920,.T.); +#429918 = VERTEX_POINT('',#429919); +#429919 = CARTESIAN_POINT('',(131.1,-87.475,1.545)); +#429920 = CIRCLE('',#429921,0.125); +#429921 = AXIS2_PLACEMENT_3D('',#429922,#429923,#429924); +#429922 = CARTESIAN_POINT('',(131.1,-87.35,1.545)); +#429923 = DIRECTION('',(-0.,0.,-1.)); +#429924 = DIRECTION('',(-0.,-1.,0.)); +#429925 = PLANE('',#429926); +#429926 = AXIS2_PLACEMENT_3D('',#429927,#429928,#429929); +#429927 = CARTESIAN_POINT('',(131.1,-87.5,1.545)); +#429928 = DIRECTION('',(0.,0.,1.)); +#429929 = DIRECTION('',(1.,0.,-0.)); +#429930 = ADVANCED_FACE('',(#429931),#429942,.F.); +#429931 = FACE_BOUND('',#429932,.T.); +#429932 = EDGE_LOOP('',(#429933,#429934,#429940,#429941)); +#429933 = ORIENTED_EDGE('',*,*,#429897,.T.); +#429934 = ORIENTED_EDGE('',*,*,#429935,.T.); +#429935 = EDGE_CURVE('',#429898,#429918,#429936,.T.); +#429936 = LINE('',#429937,#429938); +#429937 = CARTESIAN_POINT('',(131.1,-87.475,-3.6E-02)); +#429938 = VECTOR('',#429939,1.); +#429939 = DIRECTION('',(0.,0.,1.)); +#429940 = ORIENTED_EDGE('',*,*,#429917,.F.); +#429941 = ORIENTED_EDGE('',*,*,#429935,.F.); +#429942 = CYLINDRICAL_SURFACE('',#429943,0.125); +#429943 = AXIS2_PLACEMENT_3D('',#429944,#429945,#429946); +#429944 = CARTESIAN_POINT('',(131.1,-87.35,-3.6E-02)); +#429945 = DIRECTION('',(-0.,-0.,-1.)); +#429946 = DIRECTION('',(-0.,-1.,0.)); +#429947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#429951)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#429948,#429949,#429950)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#429948 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#429949 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#429950 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#429951 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#429948, + 'distance_accuracy_value','confusion accuracy'); +#429952 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#429953,#429955); +#429953 = ( REPRESENTATION_RELATIONSHIP('','',#417986,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#429954) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#429954 = ITEM_DEFINED_TRANSFORMATION('','',#11,#363); +#429955 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #429956); +#429956 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('114','=>[0:1:1:53]','',#5, + #417981,$); +#429957 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#417983)); +#429958 = SHAPE_DEFINITION_REPRESENTATION(#429959,#429965); +#429959 = PRODUCT_DEFINITION_SHAPE('','',#429960); +#429960 = PRODUCT_DEFINITION('design','',#429961,#429964); +#429961 = PRODUCT_DEFINITION_FORMATION('','',#429962); +#429962 = PRODUCT('snips_controller-unsaved-export-kiHHnP_silkscreen', + 'snips_controller-unsaved-export-kiHHnP_silkscreen','',(#429963)); +#429963 = PRODUCT_CONTEXT('',#2,'mechanical'); +#429964 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#429965 = SHAPE_REPRESENTATION('',(#11,#429966,#430017,#430068,#430112, + #430173,#430249,#430318,#430387,#430439,#430491,#430535,#430579, + #430721,#430892,#431099,#431355,#431600,#431652,#431704,#431756, + #431808,#431860,#431912,#431964,#432016,#432060,#432112,#432164, + #432216,#432268,#432312,#432364,#432416,#432468,#432520,#432564, + #432608,#432652,#432696,#432748,#432800,#432844,#432888,#432940, + #432992,#433044,#433096,#433270,#433364,#433458,#433477,#433657, + #433837,#434050,#434222,#434394,#434566,#434748,#434930,#435112, + #435294,#435539,#435689,#435851,#436017,#436160,#436405,#436555, + #436717,#436883,#437086,#437268,#437450,#437695,#437845,#438007, + #438173,#438394,#438574,#438754,#438934,#439106,#439278,#439450, + #439632,#439814,#439956,#440130,#440312,#440479,#440661,#440843, + #441088,#441238,#441400,#441566,#441811,#441961,#442123,#442289, + #442534,#442684,#442846,#443012,#443206,#443414,#443491,#443568, + #443620,#443672,#443780,#443838,#443907,#443976,#444006,#444058, + #444110,#444187,#444264,#444316,#444368,#444576,#444620,#444664, + #444733,#444802,#444846,#444890,#444934,#444978,#445022,#445066, + #445168,#445220,#445272,#445349,#445426,#445503,#445547,#445754, + #445873,#445942,#446150,#446244,#446451,#446682,#446751,#447030, + #447325,#447620,#447828,#447872,#447916,#447960,#448004,#448048, + #448100,#448152,#448196,#448304,#448381,#448458,#448535,#448612, + #448794,#448897,#449000,#449166,#449397,#449563,#449729,#449978, + #450088,#450319,#450568,#450612),#450656); +#429966 = SHELL_BASED_SURFACE_MODEL('',(#429967)); +#429967 = OPEN_SHELL('',(#429968)); +#429968 = ADVANCED_FACE('',(#429969),#430012,.T.); +#429969 = FACE_BOUND('',#429970,.F.); +#429970 = EDGE_LOOP('',(#429971,#429982,#429990,#429998,#430006)); +#429971 = ORIENTED_EDGE('',*,*,#429972,.T.); +#429972 = EDGE_CURVE('',#429973,#429975,#429977,.T.); +#429973 = VERTEX_POINT('',#429974); +#429974 = CARTESIAN_POINT('',(132.744567,-159.077039,1.585)); +#429975 = VERTEX_POINT('',#429976); +#429976 = CARTESIAN_POINT('',(132.86,-159.1,1.585)); +#429977 = CIRCLE('',#429978,6.000007318648E-02); +#429978 = AXIS2_PLACEMENT_3D('',#429979,#429980,#429981); +#429979 = CARTESIAN_POINT('',(132.79999992681,-159.0999998233,1.585)); +#429980 = DIRECTION('',(0.,0.,-1.)); +#429981 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#429982 = ORIENTED_EDGE('',*,*,#429983,.T.); +#429983 = EDGE_CURVE('',#429975,#429984,#429986,.T.); +#429984 = VERTEX_POINT('',#429985); +#429985 = CARTESIAN_POINT('',(132.86,-159.9,1.585)); +#429986 = LINE('',#429987,#429988); +#429987 = CARTESIAN_POINT('',(132.86,-159.1,1.585)); +#429988 = VECTOR('',#429989,1.); +#429989 = DIRECTION('',(0.,-1.,0.)); +#429990 = ORIENTED_EDGE('',*,*,#429991,.T.); +#429991 = EDGE_CURVE('',#429984,#429992,#429994,.T.); +#429992 = VERTEX_POINT('',#429993); +#429993 = CARTESIAN_POINT('',(132.74,-159.9,1.585)); +#429994 = LINE('',#429995,#429996); +#429995 = CARTESIAN_POINT('',(132.86,-159.9,1.585)); +#429996 = VECTOR('',#429997,1.); +#429997 = DIRECTION('',(-1.,0.,0.)); +#429998 = ORIENTED_EDGE('',*,*,#429999,.T.); +#429999 = EDGE_CURVE('',#429992,#430000,#430002,.T.); +#430000 = VERTEX_POINT('',#430001); +#430001 = CARTESIAN_POINT('',(132.74,-159.1,1.585)); +#430002 = LINE('',#430003,#430004); +#430003 = CARTESIAN_POINT('',(132.74,-159.9,1.585)); +#430004 = VECTOR('',#430005,1.); +#430005 = DIRECTION('',(0.,1.,0.)); +#430006 = ORIENTED_EDGE('',*,*,#430007,.T.); +#430007 = EDGE_CURVE('',#430000,#429973,#430008,.T.); +#430008 = LINE('',#430009,#430010); +#430009 = CARTESIAN_POINT('',(132.74,-159.1,1.585)); +#430010 = VECTOR('',#430011,1.); +#430011 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#430012 = PLANE('',#430013); +#430013 = AXIS2_PLACEMENT_3D('',#430014,#430015,#430016); +#430014 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430015 = DIRECTION('',(0.,0.,1.)); +#430016 = DIRECTION('',(1.,0.,-0.)); +#430017 = SHELL_BASED_SURFACE_MODEL('',(#430018)); +#430018 = OPEN_SHELL('',(#430019)); +#430019 = ADVANCED_FACE('',(#430020),#430063,.T.); +#430020 = FACE_BOUND('',#430021,.F.); +#430021 = EDGE_LOOP('',(#430022,#430033,#430041,#430049,#430057)); +#430022 = ORIENTED_EDGE('',*,*,#430023,.T.); +#430023 = EDGE_CURVE('',#430024,#430026,#430028,.T.); +#430024 = VERTEX_POINT('',#430025); +#430025 = CARTESIAN_POINT('',(142.144567,-159.077039,1.585)); +#430026 = VERTEX_POINT('',#430027); +#430027 = CARTESIAN_POINT('',(142.26,-159.1,1.585)); +#430028 = CIRCLE('',#430029,6.000007318647E-02); +#430029 = AXIS2_PLACEMENT_3D('',#430030,#430031,#430032); +#430030 = CARTESIAN_POINT('',(142.19999992681,-159.0999998233,1.585)); +#430031 = DIRECTION('',(0.,0.,-1.)); +#430032 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#430033 = ORIENTED_EDGE('',*,*,#430034,.T.); +#430034 = EDGE_CURVE('',#430026,#430035,#430037,.T.); +#430035 = VERTEX_POINT('',#430036); +#430036 = CARTESIAN_POINT('',(142.26,-159.9,1.585)); +#430037 = LINE('',#430038,#430039); +#430038 = CARTESIAN_POINT('',(142.26,-159.1,1.585)); +#430039 = VECTOR('',#430040,1.); +#430040 = DIRECTION('',(0.,-1.,0.)); +#430041 = ORIENTED_EDGE('',*,*,#430042,.T.); +#430042 = EDGE_CURVE('',#430035,#430043,#430045,.T.); +#430043 = VERTEX_POINT('',#430044); +#430044 = CARTESIAN_POINT('',(142.14,-159.9,1.585)); +#430045 = LINE('',#430046,#430047); +#430046 = CARTESIAN_POINT('',(142.26,-159.9,1.585)); +#430047 = VECTOR('',#430048,1.); +#430048 = DIRECTION('',(-1.,0.,0.)); +#430049 = ORIENTED_EDGE('',*,*,#430050,.T.); +#430050 = EDGE_CURVE('',#430043,#430051,#430053,.T.); +#430051 = VERTEX_POINT('',#430052); +#430052 = CARTESIAN_POINT('',(142.14,-159.1,1.585)); +#430053 = LINE('',#430054,#430055); +#430054 = CARTESIAN_POINT('',(142.14,-159.9,1.585)); +#430055 = VECTOR('',#430056,1.); +#430056 = DIRECTION('',(0.,1.,0.)); +#430057 = ORIENTED_EDGE('',*,*,#430058,.T.); +#430058 = EDGE_CURVE('',#430051,#430024,#430059,.T.); +#430059 = LINE('',#430060,#430061); +#430060 = CARTESIAN_POINT('',(142.14,-159.1,1.585)); +#430061 = VECTOR('',#430062,1.); +#430062 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#430063 = PLANE('',#430064); +#430064 = AXIS2_PLACEMENT_3D('',#430065,#430066,#430067); +#430065 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430066 = DIRECTION('',(0.,0.,1.)); +#430067 = DIRECTION('',(1.,0.,-0.)); +#430068 = SHELL_BASED_SURFACE_MODEL('',(#430069)); +#430069 = OPEN_SHELL('',(#430070)); +#430070 = ADVANCED_FACE('',(#430071),#430107,.T.); +#430071 = FACE_BOUND('',#430072,.F.); +#430072 = EDGE_LOOP('',(#430073,#430084,#430092,#430101)); +#430073 = ORIENTED_EDGE('',*,*,#430074,.T.); +#430074 = EDGE_CURVE('',#430075,#430077,#430079,.T.); +#430075 = VERTEX_POINT('',#430076); +#430076 = CARTESIAN_POINT('',(128.,-159.31,1.585)); +#430077 = VERTEX_POINT('',#430078); +#430078 = CARTESIAN_POINT('',(128.,-159.19,1.585)); +#430079 = CIRCLE('',#430080,6.000000000043E-02); +#430080 = AXIS2_PLACEMENT_3D('',#430081,#430082,#430083); +#430081 = CARTESIAN_POINT('',(127.99999977441,-159.25,1.585)); +#430082 = DIRECTION('',(0.,0.,-1.)); +#430083 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#430084 = ORIENTED_EDGE('',*,*,#430085,.T.); +#430085 = EDGE_CURVE('',#430077,#430086,#430088,.T.); +#430086 = VERTEX_POINT('',#430087); +#430087 = CARTESIAN_POINT('',(130.,-159.19,1.585)); +#430088 = LINE('',#430089,#430090); +#430089 = CARTESIAN_POINT('',(128.,-159.19,1.585)); +#430090 = VECTOR('',#430091,1.); +#430091 = DIRECTION('',(1.,0.,0.)); +#430092 = ORIENTED_EDGE('',*,*,#430093,.T.); +#430093 = EDGE_CURVE('',#430086,#430094,#430096,.T.); +#430094 = VERTEX_POINT('',#430095); +#430095 = CARTESIAN_POINT('',(130.,-159.31,1.585)); +#430096 = CIRCLE('',#430097,6.000000000042E-02); +#430097 = AXIS2_PLACEMENT_3D('',#430098,#430099,#430100); +#430098 = CARTESIAN_POINT('',(130.00000022558,-159.25,1.585)); +#430099 = DIRECTION('',(0.,0.,-1.)); +#430100 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#430101 = ORIENTED_EDGE('',*,*,#430102,.T.); +#430102 = EDGE_CURVE('',#430094,#430075,#430103,.T.); +#430103 = LINE('',#430104,#430105); +#430104 = CARTESIAN_POINT('',(130.,-159.31,1.585)); +#430105 = VECTOR('',#430106,1.); +#430106 = DIRECTION('',(-1.,0.,0.)); +#430107 = PLANE('',#430108); +#430108 = AXIS2_PLACEMENT_3D('',#430109,#430110,#430111); +#430109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430110 = DIRECTION('',(0.,0.,1.)); +#430111 = DIRECTION('',(1.,0.,-0.)); +#430112 = SHELL_BASED_SURFACE_MODEL('',(#430113)); +#430113 = OPEN_SHELL('',(#430114)); +#430114 = ADVANCED_FACE('',(#430115),#430168,.T.); +#430115 = FACE_BOUND('',#430116,.F.); +#430116 = EDGE_LOOP('',(#430117,#430128,#430136,#430145,#430153,#430162) + ); +#430117 = ORIENTED_EDGE('',*,*,#430118,.T.); +#430118 = EDGE_CURVE('',#430119,#430121,#430123,.T.); +#430119 = VERTEX_POINT('',#430120); +#430120 = CARTESIAN_POINT('',(147.75,-158.76,1.585)); +#430121 = VERTEX_POINT('',#430122); +#430122 = CARTESIAN_POINT('',(147.700077,-158.666718,1.585)); +#430123 = CIRCLE('',#430124,6.000054201698E-02); +#430124 = AXIS2_PLACEMENT_3D('',#430125,#430126,#430127); +#430125 = CARTESIAN_POINT('',(147.75000103826,-158.6999994579,1.585)); +#430126 = DIRECTION('',(0.,0.,-1.)); +#430127 = DIRECTION('',(-1.730418877817E-05,-0.99999999985,-0.)); +#430128 = ORIENTED_EDGE('',*,*,#430129,.T.); +#430129 = EDGE_CURVE('',#430121,#430130,#430132,.T.); +#430130 = VERTEX_POINT('',#430131); +#430131 = CARTESIAN_POINT('',(147.900077,-158.366718,1.585)); +#430132 = LINE('',#430133,#430134); +#430133 = CARTESIAN_POINT('',(147.700077,-158.666718,1.585)); +#430134 = VECTOR('',#430135,1.); +#430135 = DIRECTION('',(0.554700196225,0.832050294338,0.)); +#430136 = ORIENTED_EDGE('',*,*,#430137,.T.); +#430137 = EDGE_CURVE('',#430130,#430138,#430140,.T.); +#430138 = VERTEX_POINT('',#430139); +#430139 = CARTESIAN_POINT('',(147.999923,-158.366718,1.585)); +#430140 = CIRCLE('',#430141,5.999997877498E-02); +#430141 = AXIS2_PLACEMENT_3D('',#430142,#430143,#430144); +#430142 = CARTESIAN_POINT('',(147.95,-158.4,1.585)); +#430143 = DIRECTION('',(0.,0.,-1.)); +#430144 = DIRECTION('',(-0.832050294338,0.554700196225,0.)); +#430145 = ORIENTED_EDGE('',*,*,#430146,.T.); +#430146 = EDGE_CURVE('',#430138,#430147,#430149,.T.); +#430147 = VERTEX_POINT('',#430148); +#430148 = CARTESIAN_POINT('',(148.199923,-158.666718,1.585)); +#430149 = LINE('',#430150,#430151); +#430150 = CARTESIAN_POINT('',(147.999923,-158.366718,1.585)); +#430151 = VECTOR('',#430152,1.); +#430152 = DIRECTION('',(0.554700196225,-0.832050294338,0.)); +#430153 = ORIENTED_EDGE('',*,*,#430154,.T.); +#430154 = EDGE_CURVE('',#430147,#430155,#430157,.T.); +#430155 = VERTEX_POINT('',#430156); +#430156 = CARTESIAN_POINT('',(148.15,-158.76,1.585)); +#430157 = CIRCLE('',#430158,5.999981754354E-02); +#430158 = AXIS2_PLACEMENT_3D('',#430159,#430160,#430161); +#430159 = CARTESIAN_POINT('',(148.15000031541,-158.7000001824,1.585)); +#430160 = DIRECTION('',(0.,0.,-1.)); +#430161 = DIRECTION('',(0.832047273284,0.554704727779,0.)); +#430162 = ORIENTED_EDGE('',*,*,#430163,.T.); +#430163 = EDGE_CURVE('',#430155,#430119,#430164,.T.); +#430164 = LINE('',#430165,#430166); +#430165 = CARTESIAN_POINT('',(148.15,-158.76,1.585)); +#430166 = VECTOR('',#430167,1.); +#430167 = DIRECTION('',(-1.,0.,0.)); +#430168 = PLANE('',#430169); +#430169 = AXIS2_PLACEMENT_3D('',#430170,#430171,#430172); +#430170 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430171 = DIRECTION('',(0.,0.,1.)); +#430172 = DIRECTION('',(1.,0.,-0.)); +#430173 = SHELL_BASED_SURFACE_MODEL('',(#430174)); +#430174 = OPEN_SHELL('',(#430175)); +#430175 = ADVANCED_FACE('',(#430176),#430244,.T.); +#430176 = FACE_BOUND('',#430177,.F.); +#430177 = EDGE_LOOP('',(#430178,#430189,#430197,#430205,#430213,#430221, + #430230,#430238)); +#430178 = ORIENTED_EDGE('',*,*,#430179,.T.); +#430179 = EDGE_CURVE('',#430180,#430182,#430184,.T.); +#430180 = VERTEX_POINT('',#430181); +#430181 = CARTESIAN_POINT('',(147.407574,-158.257573,1.585)); +#430182 = VERTEX_POINT('',#430183); +#430183 = CARTESIAN_POINT('',(147.492427,-158.342426,1.585)); +#430184 = CIRCLE('',#430185,6.000013170726E-02); +#430185 = AXIS2_PLACEMENT_3D('',#430186,#430187,#430188); +#430186 = CARTESIAN_POINT('',(147.45000005871,-158.2999999412,1.585)); +#430187 = DIRECTION('',(0.,0.,-1.)); +#430188 = DIRECTION('',(-0.707099426341,0.707114135955,-0.)); +#430189 = ORIENTED_EDGE('',*,*,#430190,.T.); +#430190 = EDGE_CURVE('',#430182,#430191,#430193,.T.); +#430191 = VERTEX_POINT('',#430192); +#430192 = CARTESIAN_POINT('',(147.142426,-158.692426,1.585)); +#430193 = LINE('',#430194,#430195); +#430194 = CARTESIAN_POINT('',(147.492427,-158.342426,1.585)); +#430195 = VECTOR('',#430196,1.); +#430196 = DIRECTION('',(-0.707107791337,-0.707105771035,0.)); +#430197 = ORIENTED_EDGE('',*,*,#430198,.T.); +#430198 = EDGE_CURVE('',#430191,#430199,#430201,.T.); +#430199 = VERTEX_POINT('',#430200); +#430200 = CARTESIAN_POINT('',(147.122961,-158.705433,1.585)); +#430201 = LINE('',#430202,#430203); +#430202 = CARTESIAN_POINT('',(147.142426,-158.692426,1.585)); +#430203 = VECTOR('',#430204,1.); +#430204 = DIRECTION('',(-0.831451797698,-0.555596893534,0.)); +#430205 = ORIENTED_EDGE('',*,*,#430206,.T.); +#430206 = EDGE_CURVE('',#430199,#430207,#430209,.T.); +#430207 = VERTEX_POINT('',#430208); +#430208 = CARTESIAN_POINT('',(147.1,-158.71,1.585)); +#430209 = LINE('',#430210,#430211); +#430210 = CARTESIAN_POINT('',(147.122961,-158.705433,1.585)); +#430211 = VECTOR('',#430212,1.); +#430212 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#430213 = ORIENTED_EDGE('',*,*,#430214,.T.); +#430214 = EDGE_CURVE('',#430207,#430215,#430217,.T.); +#430215 = VERTEX_POINT('',#430216); +#430216 = CARTESIAN_POINT('',(144.25,-158.71,1.585)); +#430217 = LINE('',#430218,#430219); +#430218 = CARTESIAN_POINT('',(147.1,-158.71,1.585)); +#430219 = VECTOR('',#430220,1.); +#430220 = DIRECTION('',(-1.,0.,0.)); +#430221 = ORIENTED_EDGE('',*,*,#430222,.T.); +#430222 = EDGE_CURVE('',#430215,#430223,#430225,.T.); +#430223 = VERTEX_POINT('',#430224); +#430224 = CARTESIAN_POINT('',(144.25,-158.59,1.585)); +#430225 = CIRCLE('',#430226,6.000000000042E-02); +#430226 = AXIS2_PLACEMENT_3D('',#430227,#430228,#430229); +#430227 = CARTESIAN_POINT('',(144.24999977441,-158.65,1.585)); +#430228 = DIRECTION('',(0.,0.,-1.)); +#430229 = DIRECTION('',(3.75979377999E-06,-0.999999999993,0.)); +#430230 = ORIENTED_EDGE('',*,*,#430231,.T.); +#430231 = EDGE_CURVE('',#430223,#430232,#430234,.T.); +#430232 = VERTEX_POINT('',#430233); +#430233 = CARTESIAN_POINT('',(147.075148,-158.59,1.585)); +#430234 = LINE('',#430235,#430236); +#430235 = CARTESIAN_POINT('',(144.25,-158.59,1.585)); +#430236 = VECTOR('',#430237,1.); +#430237 = DIRECTION('',(1.,0.,0.)); +#430238 = ORIENTED_EDGE('',*,*,#430239,.T.); +#430239 = EDGE_CURVE('',#430232,#430180,#430240,.T.); +#430240 = LINE('',#430241,#430242); +#430241 = CARTESIAN_POINT('',(147.075148,-158.59,1.585)); +#430242 = VECTOR('',#430243,1.); +#430243 = DIRECTION('',(0.707105717632,0.707107844739,0.)); +#430244 = PLANE('',#430245); +#430245 = AXIS2_PLACEMENT_3D('',#430246,#430247,#430248); +#430246 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430247 = DIRECTION('',(0.,0.,1.)); +#430248 = DIRECTION('',(1.,0.,-0.)); +#430249 = SHELL_BASED_SURFACE_MODEL('',(#430250)); +#430250 = OPEN_SHELL('',(#430251)); +#430251 = ADVANCED_FACE('',(#430252),#430313,.T.); +#430252 = FACE_BOUND('',#430253,.F.); +#430253 = EDGE_LOOP('',(#430254,#430265,#430273,#430282,#430290,#430298, + #430307)); +#430254 = ORIENTED_EDGE('',*,*,#430255,.T.); +#430255 = EDGE_CURVE('',#430256,#430258,#430260,.T.); +#430256 = VERTEX_POINT('',#430257); +#430257 = CARTESIAN_POINT('',(126.54,-156.45,1.585)); +#430258 = VERTEX_POINT('',#430259); +#430259 = CARTESIAN_POINT('',(126.6,-156.39,1.585)); +#430260 = CIRCLE('',#430261,5.999932016259E-02); +#430261 = AXIS2_PLACEMENT_3D('',#430262,#430263,#430264); +#430262 = CARTESIAN_POINT('',(126.59999932015,-156.4499993201,1.585)); +#430263 = DIRECTION('',(0.,0.,-1.)); +#430264 = DIRECTION('',(-0.999999999936,-1.133081612143E-05,-0.)); +#430265 = ORIENTED_EDGE('',*,*,#430266,.T.); +#430266 = EDGE_CURVE('',#430258,#430267,#430269,.T.); +#430267 = VERTEX_POINT('',#430268); +#430268 = CARTESIAN_POINT('',(127.2,-156.39,1.585)); +#430269 = LINE('',#430270,#430271); +#430270 = CARTESIAN_POINT('',(126.6,-156.39,1.585)); +#430271 = VECTOR('',#430272,1.); +#430272 = DIRECTION('',(1.,0.,0.)); +#430273 = ORIENTED_EDGE('',*,*,#430274,.T.); +#430274 = EDGE_CURVE('',#430267,#430275,#430277,.T.); +#430275 = VERTEX_POINT('',#430276); +#430276 = CARTESIAN_POINT('',(127.2,-156.51,1.585)); +#430277 = CIRCLE('',#430278,6.000000000043E-02); +#430278 = AXIS2_PLACEMENT_3D('',#430279,#430280,#430281); +#430279 = CARTESIAN_POINT('',(127.20000022558,-156.45,1.585)); +#430280 = DIRECTION('',(0.,0.,-1.)); +#430281 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#430282 = ORIENTED_EDGE('',*,*,#430283,.T.); +#430283 = EDGE_CURVE('',#430275,#430284,#430286,.T.); +#430284 = VERTEX_POINT('',#430285); +#430285 = CARTESIAN_POINT('',(126.66,-156.51,1.585)); +#430286 = LINE('',#430287,#430288); +#430287 = CARTESIAN_POINT('',(127.2,-156.51,1.585)); +#430288 = VECTOR('',#430289,1.); +#430289 = DIRECTION('',(-1.,0.,0.)); +#430290 = ORIENTED_EDGE('',*,*,#430291,.T.); +#430291 = EDGE_CURVE('',#430284,#430292,#430294,.T.); +#430292 = VERTEX_POINT('',#430293); +#430293 = CARTESIAN_POINT('',(126.66,-157.45,1.585)); +#430294 = LINE('',#430295,#430296); +#430295 = CARTESIAN_POINT('',(126.66,-156.51,1.585)); +#430296 = VECTOR('',#430297,1.); +#430297 = DIRECTION('',(0.,-1.,0.)); +#430298 = ORIENTED_EDGE('',*,*,#430299,.T.); +#430299 = EDGE_CURVE('',#430292,#430300,#430302,.T.); +#430300 = VERTEX_POINT('',#430301); +#430301 = CARTESIAN_POINT('',(126.54,-157.45,1.585)); +#430302 = CIRCLE('',#430303,6.000000000043E-02); +#430303 = AXIS2_PLACEMENT_3D('',#430304,#430305,#430306); +#430304 = CARTESIAN_POINT('',(126.6,-157.4500002255,1.585)); +#430305 = DIRECTION('',(0.,0.,-1.)); +#430306 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#430307 = ORIENTED_EDGE('',*,*,#430308,.T.); +#430308 = EDGE_CURVE('',#430300,#430256,#430309,.T.); +#430309 = LINE('',#430310,#430311); +#430310 = CARTESIAN_POINT('',(126.54,-157.45,1.585)); +#430311 = VECTOR('',#430312,1.); +#430312 = DIRECTION('',(0.,1.,0.)); +#430313 = PLANE('',#430314); +#430314 = AXIS2_PLACEMENT_3D('',#430315,#430316,#430317); +#430315 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430316 = DIRECTION('',(0.,0.,1.)); +#430317 = DIRECTION('',(1.,0.,-0.)); +#430318 = SHELL_BASED_SURFACE_MODEL('',(#430319)); +#430319 = OPEN_SHELL('',(#430320)); +#430320 = ADVANCED_FACE('',(#430321),#430382,.T.); +#430321 = FACE_BOUND('',#430322,.F.); +#430322 = EDGE_LOOP('',(#430323,#430334,#430342,#430351,#430359,#430368, + #430376)); +#430323 = ORIENTED_EDGE('',*,*,#430324,.T.); +#430324 = EDGE_CURVE('',#430325,#430327,#430329,.T.); +#430325 = VERTEX_POINT('',#430326); +#430326 = CARTESIAN_POINT('',(130.8,-156.51,1.585)); +#430327 = VERTEX_POINT('',#430328); +#430328 = CARTESIAN_POINT('',(130.8,-156.39,1.585)); +#430329 = CIRCLE('',#430330,6.000000000043E-02); +#430330 = AXIS2_PLACEMENT_3D('',#430331,#430332,#430333); +#430331 = CARTESIAN_POINT('',(130.79999977441,-156.45,1.585)); +#430332 = DIRECTION('',(0.,0.,-1.)); +#430333 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#430334 = ORIENTED_EDGE('',*,*,#430335,.T.); +#430335 = EDGE_CURVE('',#430327,#430336,#430338,.T.); +#430336 = VERTEX_POINT('',#430337); +#430337 = CARTESIAN_POINT('',(131.4,-156.39,1.585)); +#430338 = LINE('',#430339,#430340); +#430339 = CARTESIAN_POINT('',(130.8,-156.39,1.585)); +#430340 = VECTOR('',#430341,1.); +#430341 = DIRECTION('',(1.,0.,0.)); +#430342 = ORIENTED_EDGE('',*,*,#430343,.T.); +#430343 = EDGE_CURVE('',#430336,#430344,#430346,.T.); +#430344 = VERTEX_POINT('',#430345); +#430345 = CARTESIAN_POINT('',(131.46,-156.45,1.585)); +#430346 = CIRCLE('',#430347,5.999932016268E-02); +#430347 = AXIS2_PLACEMENT_3D('',#430348,#430349,#430350); +#430348 = CARTESIAN_POINT('',(131.40000067984,-156.4499993201,1.585)); +#430349 = DIRECTION('',(0.,0.,-1.)); +#430350 = DIRECTION('',(-1.133081470031E-05,0.999999999936,0.)); +#430351 = ORIENTED_EDGE('',*,*,#430352,.T.); +#430352 = EDGE_CURVE('',#430344,#430353,#430355,.T.); +#430353 = VERTEX_POINT('',#430354); +#430354 = CARTESIAN_POINT('',(131.46,-157.45,1.585)); +#430355 = LINE('',#430356,#430357); +#430356 = CARTESIAN_POINT('',(131.46,-156.45,1.585)); +#430357 = VECTOR('',#430358,1.); +#430358 = DIRECTION('',(0.,-1.,0.)); +#430359 = ORIENTED_EDGE('',*,*,#430360,.T.); +#430360 = EDGE_CURVE('',#430353,#430361,#430363,.T.); +#430361 = VERTEX_POINT('',#430362); +#430362 = CARTESIAN_POINT('',(131.34,-157.45,1.585)); +#430363 = CIRCLE('',#430364,6.000000000042E-02); +#430364 = AXIS2_PLACEMENT_3D('',#430365,#430366,#430367); +#430365 = CARTESIAN_POINT('',(131.4,-157.4500002255,1.585)); +#430366 = DIRECTION('',(0.,0.,-1.)); +#430367 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#430368 = ORIENTED_EDGE('',*,*,#430369,.T.); +#430369 = EDGE_CURVE('',#430361,#430370,#430372,.T.); +#430370 = VERTEX_POINT('',#430371); +#430371 = CARTESIAN_POINT('',(131.34,-156.51,1.585)); +#430372 = LINE('',#430373,#430374); +#430373 = CARTESIAN_POINT('',(131.34,-157.45,1.585)); +#430374 = VECTOR('',#430375,1.); +#430375 = DIRECTION('',(0.,1.,0.)); +#430376 = ORIENTED_EDGE('',*,*,#430377,.T.); +#430377 = EDGE_CURVE('',#430370,#430325,#430378,.T.); +#430378 = LINE('',#430379,#430380); +#430379 = CARTESIAN_POINT('',(131.34,-156.51,1.585)); +#430380 = VECTOR('',#430381,1.); +#430381 = DIRECTION('',(-1.,0.,0.)); +#430382 = PLANE('',#430383); +#430383 = AXIS2_PLACEMENT_3D('',#430384,#430385,#430386); +#430384 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430385 = DIRECTION('',(0.,0.,1.)); +#430386 = DIRECTION('',(1.,0.,-0.)); +#430387 = SHELL_BASED_SURFACE_MODEL('',(#430388)); +#430388 = OPEN_SHELL('',(#430389)); +#430389 = ADVANCED_FACE('',(#430390),#430434,.T.); +#430390 = FACE_BOUND('',#430391,.F.); +#430391 = EDGE_LOOP('',(#430392,#430403,#430411,#430420,#430428)); +#430392 = ORIENTED_EDGE('',*,*,#430393,.T.); +#430393 = EDGE_CURVE('',#430394,#430396,#430398,.T.); +#430394 = VERTEX_POINT('',#430395); +#430395 = CARTESIAN_POINT('',(132.744567,-155.177039,1.585)); +#430396 = VERTEX_POINT('',#430397); +#430397 = CARTESIAN_POINT('',(132.86,-155.2,1.585)); +#430398 = CIRCLE('',#430399,6.000007318648E-02); +#430399 = AXIS2_PLACEMENT_3D('',#430400,#430401,#430402); +#430400 = CARTESIAN_POINT('',(132.79999992681,-155.1999998233,1.585)); +#430401 = DIRECTION('',(0.,0.,-1.)); +#430402 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#430403 = ORIENTED_EDGE('',*,*,#430404,.T.); +#430404 = EDGE_CURVE('',#430396,#430405,#430407,.T.); +#430405 = VERTEX_POINT('',#430406); +#430406 = CARTESIAN_POINT('',(132.86,-157.2,1.585)); +#430407 = LINE('',#430408,#430409); +#430408 = CARTESIAN_POINT('',(132.86,-155.2,1.585)); +#430409 = VECTOR('',#430410,1.); +#430410 = DIRECTION('',(0.,-1.,0.)); +#430411 = ORIENTED_EDGE('',*,*,#430412,.T.); +#430412 = EDGE_CURVE('',#430405,#430413,#430415,.T.); +#430413 = VERTEX_POINT('',#430414); +#430414 = CARTESIAN_POINT('',(132.74,-157.2,1.585)); +#430415 = CIRCLE('',#430416,6.000000000043E-02); +#430416 = AXIS2_PLACEMENT_3D('',#430417,#430418,#430419); +#430417 = CARTESIAN_POINT('',(132.8,-157.2000002255,1.585)); +#430418 = DIRECTION('',(0.,0.,-1.)); +#430419 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#430420 = ORIENTED_EDGE('',*,*,#430421,.T.); +#430421 = EDGE_CURVE('',#430413,#430422,#430424,.T.); +#430422 = VERTEX_POINT('',#430423); +#430423 = CARTESIAN_POINT('',(132.74,-155.2,1.585)); +#430424 = LINE('',#430425,#430426); +#430425 = CARTESIAN_POINT('',(132.74,-157.2,1.585)); +#430426 = VECTOR('',#430427,1.); +#430427 = DIRECTION('',(0.,1.,0.)); +#430428 = ORIENTED_EDGE('',*,*,#430429,.T.); +#430429 = EDGE_CURVE('',#430422,#430394,#430430,.T.); +#430430 = LINE('',#430431,#430432); +#430431 = CARTESIAN_POINT('',(132.74,-155.2,1.585)); +#430432 = VECTOR('',#430433,1.); +#430433 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#430434 = PLANE('',#430435); +#430435 = AXIS2_PLACEMENT_3D('',#430436,#430437,#430438); +#430436 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430437 = DIRECTION('',(0.,0.,1.)); +#430438 = DIRECTION('',(1.,0.,-0.)); +#430439 = SHELL_BASED_SURFACE_MODEL('',(#430440)); +#430440 = OPEN_SHELL('',(#430441)); +#430441 = ADVANCED_FACE('',(#430442),#430486,.T.); +#430442 = FACE_BOUND('',#430443,.F.); +#430443 = EDGE_LOOP('',(#430444,#430455,#430463,#430472,#430480)); +#430444 = ORIENTED_EDGE('',*,*,#430445,.T.); +#430445 = EDGE_CURVE('',#430446,#430448,#430450,.T.); +#430446 = VERTEX_POINT('',#430447); +#430447 = CARTESIAN_POINT('',(142.144567,-155.177039,1.585)); +#430448 = VERTEX_POINT('',#430449); +#430449 = CARTESIAN_POINT('',(142.26,-155.2,1.585)); +#430450 = CIRCLE('',#430451,6.000007318647E-02); +#430451 = AXIS2_PLACEMENT_3D('',#430452,#430453,#430454); +#430452 = CARTESIAN_POINT('',(142.19999992681,-155.1999998233,1.585)); +#430453 = DIRECTION('',(0.,0.,-1.)); +#430454 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#430455 = ORIENTED_EDGE('',*,*,#430456,.T.); +#430456 = EDGE_CURVE('',#430448,#430457,#430459,.T.); +#430457 = VERTEX_POINT('',#430458); +#430458 = CARTESIAN_POINT('',(142.26,-157.2,1.585)); +#430459 = LINE('',#430460,#430461); +#430460 = CARTESIAN_POINT('',(142.26,-155.2,1.585)); +#430461 = VECTOR('',#430462,1.); +#430462 = DIRECTION('',(0.,-1.,0.)); +#430463 = ORIENTED_EDGE('',*,*,#430464,.T.); +#430464 = EDGE_CURVE('',#430457,#430465,#430467,.T.); +#430465 = VERTEX_POINT('',#430466); +#430466 = CARTESIAN_POINT('',(142.14,-157.2,1.585)); +#430467 = CIRCLE('',#430468,6.000000000043E-02); +#430468 = AXIS2_PLACEMENT_3D('',#430469,#430470,#430471); +#430469 = CARTESIAN_POINT('',(142.2,-157.2000002255,1.585)); +#430470 = DIRECTION('',(0.,0.,-1.)); +#430471 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#430472 = ORIENTED_EDGE('',*,*,#430473,.T.); +#430473 = EDGE_CURVE('',#430465,#430474,#430476,.T.); +#430474 = VERTEX_POINT('',#430475); +#430475 = CARTESIAN_POINT('',(142.14,-155.2,1.585)); +#430476 = LINE('',#430477,#430478); +#430477 = CARTESIAN_POINT('',(142.14,-157.2,1.585)); +#430478 = VECTOR('',#430479,1.); +#430479 = DIRECTION('',(0.,1.,0.)); +#430480 = ORIENTED_EDGE('',*,*,#430481,.T.); +#430481 = EDGE_CURVE('',#430474,#430446,#430482,.T.); +#430482 = LINE('',#430483,#430484); +#430483 = CARTESIAN_POINT('',(142.14,-155.2,1.585)); +#430484 = VECTOR('',#430485,1.); +#430485 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#430486 = PLANE('',#430487); +#430487 = AXIS2_PLACEMENT_3D('',#430488,#430489,#430490); +#430488 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430489 = DIRECTION('',(0.,0.,1.)); +#430490 = DIRECTION('',(1.,0.,-0.)); +#430491 = SHELL_BASED_SURFACE_MODEL('',(#430492)); +#430492 = OPEN_SHELL('',(#430493)); +#430493 = ADVANCED_FACE('',(#430494),#430530,.T.); +#430494 = FACE_BOUND('',#430495,.F.); +#430495 = EDGE_LOOP('',(#430496,#430507,#430515,#430524)); +#430496 = ORIENTED_EDGE('',*,*,#430497,.T.); +#430497 = EDGE_CURVE('',#430498,#430500,#430502,.T.); +#430498 = VERTEX_POINT('',#430499); +#430499 = CARTESIAN_POINT('',(144.25,-154.71,1.585)); +#430500 = VERTEX_POINT('',#430501); +#430501 = CARTESIAN_POINT('',(144.25,-154.59,1.585)); +#430502 = CIRCLE('',#430503,6.000000000042E-02); +#430503 = AXIS2_PLACEMENT_3D('',#430504,#430505,#430506); +#430504 = CARTESIAN_POINT('',(144.24999977441,-154.65,1.585)); +#430505 = DIRECTION('',(0.,0.,-1.)); +#430506 = DIRECTION('',(3.75979377999E-06,-0.999999999993,0.)); +#430507 = ORIENTED_EDGE('',*,*,#430508,.T.); +#430508 = EDGE_CURVE('',#430500,#430509,#430511,.T.); +#430509 = VERTEX_POINT('',#430510); +#430510 = CARTESIAN_POINT('',(147.45,-154.59,1.585)); +#430511 = LINE('',#430512,#430513); +#430512 = CARTESIAN_POINT('',(144.25,-154.59,1.585)); +#430513 = VECTOR('',#430514,1.); +#430514 = DIRECTION('',(1.,0.,0.)); +#430515 = ORIENTED_EDGE('',*,*,#430516,.T.); +#430516 = EDGE_CURVE('',#430509,#430517,#430519,.T.); +#430517 = VERTEX_POINT('',#430518); +#430518 = CARTESIAN_POINT('',(147.45,-154.71,1.585)); +#430519 = CIRCLE('',#430520,6.000000000043E-02); +#430520 = AXIS2_PLACEMENT_3D('',#430521,#430522,#430523); +#430521 = CARTESIAN_POINT('',(147.45000022558,-154.65,1.585)); +#430522 = DIRECTION('',(0.,0.,-1.)); +#430523 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#430524 = ORIENTED_EDGE('',*,*,#430525,.T.); +#430525 = EDGE_CURVE('',#430517,#430498,#430526,.T.); +#430526 = LINE('',#430527,#430528); +#430527 = CARTESIAN_POINT('',(147.45,-154.71,1.585)); +#430528 = VECTOR('',#430529,1.); +#430529 = DIRECTION('',(-1.,0.,0.)); +#430530 = PLANE('',#430531); +#430531 = AXIS2_PLACEMENT_3D('',#430532,#430533,#430534); +#430532 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430533 = DIRECTION('',(0.,0.,1.)); +#430534 = DIRECTION('',(1.,0.,-0.)); +#430535 = SHELL_BASED_SURFACE_MODEL('',(#430536)); +#430536 = OPEN_SHELL('',(#430537)); +#430537 = ADVANCED_FACE('',(#430538),#430574,.T.); +#430538 = FACE_BOUND('',#430539,.F.); +#430539 = EDGE_LOOP('',(#430540,#430551,#430559,#430568)); +#430540 = ORIENTED_EDGE('',*,*,#430541,.T.); +#430541 = EDGE_CURVE('',#430542,#430544,#430546,.T.); +#430542 = VERTEX_POINT('',#430543); +#430543 = CARTESIAN_POINT('',(143.978225,-154.373616,1.585)); +#430544 = VERTEX_POINT('',#430545); +#430545 = CARTESIAN_POINT('',(143.992857,-154.225057,1.585)); +#430546 = CIRCLE('',#430547,7.500006711464E-02); +#430547 = AXIS2_PLACEMENT_3D('',#430548,#430549,#430550); +#430548 = CARTESIAN_POINT('',(143.99285693288,-154.3000570671,1.585)); +#430549 = DIRECTION('',(0.,0.,-1.)); +#430550 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#430551 = ORIENTED_EDGE('',*,*,#430552,.T.); +#430552 = EDGE_CURVE('',#430544,#430553,#430555,.T.); +#430553 = VERTEX_POINT('',#430554); +#430554 = CARTESIAN_POINT('',(144.769393,-154.226498,1.585)); +#430555 = LINE('',#430556,#430557); +#430556 = CARTESIAN_POINT('',(143.992857,-154.225057,1.585)); +#430557 = VECTOR('',#430558,1.); +#430558 = DIRECTION('',(0.999998278236,-1.855673811565E-03,0.)); +#430559 = ORIENTED_EDGE('',*,*,#430560,.T.); +#430560 = EDGE_CURVE('',#430553,#430561,#430563,.T.); +#430561 = VERTEX_POINT('',#430562); +#430562 = CARTESIAN_POINT('',(144.754761,-154.375057,1.585)); +#430563 = CIRCLE('',#430564,7.500006711464E-02); +#430564 = AXIS2_PLACEMENT_3D('',#430565,#430566,#430567); +#430565 = CARTESIAN_POINT('',(144.75476106711,-154.3000569328,1.585)); +#430566 = DIRECTION('',(0.,0.,-1.)); +#430567 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#430568 = ORIENTED_EDGE('',*,*,#430569,.T.); +#430569 = EDGE_CURVE('',#430561,#430542,#430570,.T.); +#430570 = LINE('',#430571,#430572); +#430571 = CARTESIAN_POINT('',(144.754761,-154.375057,1.585)); +#430572 = VECTOR('',#430573,1.); +#430573 = DIRECTION('',(-0.999998278236,1.855673811565E-03,0.)); +#430574 = PLANE('',#430575); +#430575 = AXIS2_PLACEMENT_3D('',#430576,#430577,#430578); +#430576 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430577 = DIRECTION('',(0.,0.,1.)); +#430578 = DIRECTION('',(1.,0.,-0.)); +#430579 = SHELL_BASED_SURFACE_MODEL('',(#430580)); +#430580 = OPEN_SHELL('',(#430581)); +#430581 = ADVANCED_FACE('',(#430582),#430716,.T.); +#430582 = FACE_BOUND('',#430583,.F.); +#430583 = EDGE_LOOP('',(#430584,#430594,#430602,#430611,#430619,#430627, + #430636,#430644,#430653,#430661,#430669,#430677,#430685,#430694, + #430702,#430710)); +#430584 = ORIENTED_EDGE('',*,*,#430585,.T.); +#430585 = EDGE_CURVE('',#430586,#430588,#430590,.T.); +#430586 = VERTEX_POINT('',#430587); +#430587 = CARTESIAN_POINT('',(148.177864,-153.151841,1.585)); +#430588 = VERTEX_POINT('',#430589); +#430589 = CARTESIAN_POINT('',(148.21632,-153.13126,1.585)); +#430590 = LINE('',#430591,#430592); +#430591 = CARTESIAN_POINT('',(148.177864,-153.151841,1.585)); +#430592 = VECTOR('',#430593,1.); +#430593 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#430594 = ORIENTED_EDGE('',*,*,#430595,.T.); +#430595 = EDGE_CURVE('',#430588,#430596,#430598,.T.); +#430596 = VERTEX_POINT('',#430597); +#430597 = CARTESIAN_POINT('',(148.238157,-153.13126,1.585)); +#430598 = LINE('',#430599,#430600); +#430599 = CARTESIAN_POINT('',(148.21632,-153.13126,1.585)); +#430600 = VECTOR('',#430601,1.); +#430601 = DIRECTION('',(1.,0.,0.)); +#430602 = ORIENTED_EDGE('',*,*,#430603,.T.); +#430603 = EDGE_CURVE('',#430596,#430604,#430606,.T.); +#430604 = VERTEX_POINT('',#430605); +#430605 = CARTESIAN_POINT('',(148.305952,-153.204819,1.585)); +#430606 = CIRCLE('',#430607,7.216898094229E-02); +#430607 = AXIS2_PLACEMENT_3D('',#430608,#430609,#430610); +#430608 = CARTESIAN_POINT('',(148.23379906389,-153.2032972834,1.585)); +#430609 = DIRECTION('',(0.,0.,-1.)); +#430610 = DIRECTION('',(6.038516895304E-02,0.998175150648,0.)); +#430611 = ORIENTED_EDGE('',*,*,#430612,.T.); +#430612 = EDGE_CURVE('',#430604,#430613,#430615,.T.); +#430613 = VERTEX_POINT('',#430614); +#430614 = CARTESIAN_POINT('',(148.305952,-154.129819,1.585)); +#430615 = LINE('',#430616,#430617); +#430616 = CARTESIAN_POINT('',(148.305952,-153.204819,1.585)); +#430617 = VECTOR('',#430618,1.); +#430618 = DIRECTION('',(0.,-1.,0.)); +#430619 = ORIENTED_EDGE('',*,*,#430620,.T.); +#430620 = EDGE_CURVE('',#430613,#430621,#430623,.T.); +#430621 = VERTEX_POINT('',#430622); +#430622 = CARTESIAN_POINT('',(148.531298,-154.13126,1.585)); +#430623 = LINE('',#430624,#430625); +#430624 = CARTESIAN_POINT('',(148.305952,-154.129819,1.585)); +#430625 = VECTOR('',#430626,1.); +#430626 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#430627 = ORIENTED_EDGE('',*,*,#430628,.T.); +#430628 = EDGE_CURVE('',#430621,#430629,#430631,.T.); +#430629 = VERTEX_POINT('',#430630); +#430630 = CARTESIAN_POINT('',(148.516666,-154.279819,1.585)); +#430631 = CIRCLE('',#430632,7.500006711463E-02); +#430632 = AXIS2_PLACEMENT_3D('',#430633,#430634,#430635); +#430633 = CARTESIAN_POINT('',(148.51666606711,-154.2048189328,1.585)); +#430634 = DIRECTION('',(0.,0.,-1.)); +#430635 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#430636 = ORIENTED_EDGE('',*,*,#430637,.T.); +#430637 = EDGE_CURVE('',#430629,#430638,#430640,.T.); +#430638 = VERTEX_POINT('',#430639); +#430639 = CARTESIAN_POINT('',(147.930606,-154.278378,1.585)); +#430640 = LINE('',#430641,#430642); +#430641 = CARTESIAN_POINT('',(148.516666,-154.279819,1.585)); +#430642 = VECTOR('',#430643,1.); +#430643 = DIRECTION('',(-0.999996977183,2.458785182611E-03,0.)); +#430644 = ORIENTED_EDGE('',*,*,#430645,.T.); +#430645 = EDGE_CURVE('',#430638,#430646,#430648,.T.); +#430646 = VERTEX_POINT('',#430647); +#430647 = CARTESIAN_POINT('',(147.945238,-154.129819,1.585)); +#430648 = CIRCLE('',#430649,7.500006711464E-02); +#430649 = AXIS2_PLACEMENT_3D('',#430650,#430651,#430652); +#430650 = CARTESIAN_POINT('',(147.94523793288,-154.2048190671,1.585)); +#430651 = DIRECTION('',(0.,0.,-1.)); +#430652 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#430653 = ORIENTED_EDGE('',*,*,#430654,.T.); +#430654 = EDGE_CURVE('',#430646,#430655,#430657,.T.); +#430655 = VERTEX_POINT('',#430656); +#430656 = CARTESIAN_POINT('',(148.155952,-154.129819,1.585)); +#430657 = LINE('',#430658,#430659); +#430658 = CARTESIAN_POINT('',(147.945238,-154.129819,1.585)); +#430659 = VECTOR('',#430660,1.); +#430660 = DIRECTION('',(1.,0.,0.)); +#430661 = ORIENTED_EDGE('',*,*,#430662,.T.); +#430662 = EDGE_CURVE('',#430655,#430663,#430665,.T.); +#430663 = VERTEX_POINT('',#430664); +#430664 = CARTESIAN_POINT('',(148.155952,-153.433504,1.585)); +#430665 = LINE('',#430666,#430667); +#430666 = CARTESIAN_POINT('',(148.155952,-154.129819,1.585)); +#430667 = VECTOR('',#430668,1.); +#430668 = DIRECTION('',(0.,1.,0.)); +#430669 = ORIENTED_EDGE('',*,*,#430670,.T.); +#430670 = EDGE_CURVE('',#430663,#430671,#430673,.T.); +#430671 = VERTEX_POINT('',#430672); +#430672 = CARTESIAN_POINT('',(148.080316,-153.506031,1.585)); +#430673 = LINE('',#430674,#430675); +#430674 = CARTESIAN_POINT('',(148.155952,-153.433504,1.585)); +#430675 = VECTOR('',#430676,1.); +#430676 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#430677 = ORIENTED_EDGE('',*,*,#430678,.T.); +#430678 = EDGE_CURVE('',#430671,#430679,#430681,.T.); +#430679 = VERTEX_POINT('',#430680); +#430680 = CARTESIAN_POINT('',(147.965047,-153.56287,1.585)); +#430681 = LINE('',#430682,#430683); +#430682 = CARTESIAN_POINT('',(148.080316,-153.506031,1.585)); +#430683 = VECTOR('',#430684,1.); +#430684 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#430685 = ORIENTED_EDGE('',*,*,#430686,.T.); +#430686 = EDGE_CURVE('',#430679,#430687,#430689,.T.); +#430687 = VERTEX_POINT('',#430688); +#430688 = CARTESIAN_POINT('',(147.911697,-153.423451,1.585)); +#430689 = CIRCLE('',#430690,7.500005272362E-02); +#430690 = AXIS2_PLACEMENT_3D('',#430691,#430692,#430693); +#430691 = CARTESIAN_POINT('',(147.94523755676,-153.4905333297,1.585)); +#430692 = DIRECTION('',(0.,0.,-1.)); +#430693 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#430694 = ORIENTED_EDGE('',*,*,#430695,.T.); +#430695 = EDGE_CURVE('',#430687,#430696,#430698,.T.); +#430696 = VERTEX_POINT('',#430697); +#430697 = CARTESIAN_POINT('',(147.996049,-153.381275,1.585)); +#430698 = LINE('',#430699,#430700); +#430699 = CARTESIAN_POINT('',(147.911697,-153.423451,1.585)); +#430700 = VECTOR('',#430701,1.); +#430701 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#430702 = ORIENTED_EDGE('',*,*,#430703,.T.); +#430703 = EDGE_CURVE('',#430696,#430704,#430706,.T.); +#430704 = VERTEX_POINT('',#430705); +#430705 = CARTESIAN_POINT('',(148.077428,-153.299896,1.585)); +#430706 = LINE('',#430707,#430708); +#430707 = CARTESIAN_POINT('',(147.996049,-153.381275,1.585)); +#430708 = VECTOR('',#430709,1.); +#430709 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#430710 = ORIENTED_EDGE('',*,*,#430711,.T.); +#430711 = EDGE_CURVE('',#430704,#430586,#430712,.T.); +#430712 = LINE('',#430713,#430714); +#430713 = CARTESIAN_POINT('',(148.077428,-153.299896,1.585)); +#430714 = VECTOR('',#430715,1.); +#430715 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#430716 = PLANE('',#430717); +#430717 = AXIS2_PLACEMENT_3D('',#430718,#430719,#430720); +#430718 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430719 = DIRECTION('',(0.,0.,1.)); +#430720 = DIRECTION('',(1.,0.,-0.)); +#430721 = SHELL_BASED_SURFACE_MODEL('',(#430722)); +#430722 = OPEN_SHELL('',(#430723)); +#430723 = ADVANCED_FACE('',(#430724,#430835),#430887,.T.); +#430724 = FACE_BOUND('',#430725,.F.); +#430725 = EDGE_LOOP('',(#430726,#430737,#430745,#430754,#430762,#430771, + #430779,#430787,#430796,#430804,#430812,#430820,#430829)); +#430726 = ORIENTED_EDGE('',*,*,#430727,.T.); +#430727 = EDGE_CURVE('',#430728,#430730,#430732,.T.); +#430728 = VERTEX_POINT('',#430729); +#430729 = CARTESIAN_POINT('',(144.919298,-153.190187,1.585)); +#430730 = VERTEX_POINT('',#430731); +#430731 = CARTESIAN_POINT('',(144.992857,-153.129819,1.585)); +#430732 = CIRCLE('',#430733,7.50007493899E-02); +#430733 = AXIS2_PLACEMENT_3D('',#430734,#430735,#430736); +#430734 = CARTESIAN_POINT('',(144.99285746611,-153.2048197493,1.585)); +#430735 = DIRECTION('',(0.,0.,-1.)); +#430736 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#430737 = ORIENTED_EDGE('',*,*,#430738,.T.); +#430738 = EDGE_CURVE('',#430730,#430739,#430741,.T.); +#430739 = VERTEX_POINT('',#430740); +#430740 = CARTESIAN_POINT('',(145.388441,-153.13126,1.585)); +#430741 = LINE('',#430742,#430743); +#430742 = CARTESIAN_POINT('',(144.992857,-153.129819,1.585)); +#430743 = VECTOR('',#430744,1.); +#430744 = DIRECTION('',(0.999993365378,-3.64269141196E-03,0.)); +#430745 = ORIENTED_EDGE('',*,*,#430746,.T.); +#430746 = EDGE_CURVE('',#430739,#430747,#430749,.T.); +#430747 = VERTEX_POINT('',#430748); +#430748 = CARTESIAN_POINT('',(145.637844,-153.380663,1.585)); +#430749 = CIRCLE('',#430750,0.347870264855); +#430750 = AXIS2_PLACEMENT_3D('',#430751,#430752,#430753); +#430751 = CARTESIAN_POINT('',(145.30111326502,-153.4679907349,1.585)); +#430752 = DIRECTION('',(0.,0.,-1.)); +#430753 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#430754 = ORIENTED_EDGE('',*,*,#430755,.T.); +#430755 = EDGE_CURVE('',#430747,#430756,#430758,.T.); +#430756 = VERTEX_POINT('',#430757); +#430757 = CARTESIAN_POINT('',(145.636622,-153.557962,1.585)); +#430758 = LINE('',#430759,#430760); +#430759 = CARTESIAN_POINT('',(145.637844,-153.380663,1.585)); +#430760 = VECTOR('',#430761,1.); +#430761 = DIRECTION('',(-6.892148157212E-03,-0.999976248865,0.)); +#430762 = ORIENTED_EDGE('',*,*,#430763,.T.); +#430763 = EDGE_CURVE('',#430756,#430764,#430766,.T.); +#430764 = VERTEX_POINT('',#430765); +#430765 = CARTESIAN_POINT('',(145.388441,-153.802187,1.585)); +#430766 = CIRCLE('',#430767,0.348632345848); +#430767 = AXIS2_PLACEMENT_3D('',#430768,#430769,#430770); +#430768 = CARTESIAN_POINT('',(145.30067219403,-153.4647834593,1.585)); +#430769 = DIRECTION('',(0.,0.,-1.)); +#430770 = DIRECTION('',(0.963622021775,-0.267268776985,0.)); +#430771 = ORIENTED_EDGE('',*,*,#430772,.T.); +#430772 = EDGE_CURVE('',#430764,#430773,#430775,.T.); +#430773 = VERTEX_POINT('',#430774); +#430774 = CARTESIAN_POINT('',(145.374924,-153.803518,1.585)); +#430775 = LINE('',#430776,#430777); +#430776 = CARTESIAN_POINT('',(145.388441,-153.802187,1.585)); +#430777 = VECTOR('',#430778,1.); +#430778 = DIRECTION('',(-0.995186940545,-9.799465989924E-02,0.)); +#430779 = ORIENTED_EDGE('',*,*,#430780,.T.); +#430780 = EDGE_CURVE('',#430773,#430781,#430783,.T.); +#430781 = VERTEX_POINT('',#430782); +#430782 = CARTESIAN_POINT('',(145.632938,-154.174623,1.585)); +#430783 = LINE('',#430784,#430785); +#430784 = CARTESIAN_POINT('',(145.374924,-153.803518,1.585)); +#430785 = VECTOR('',#430786,1.); +#430786 = DIRECTION('',(0.570846789809,-0.821056601316,0.)); +#430787 = ORIENTED_EDGE('',*,*,#430788,.T.); +#430788 = EDGE_CURVE('',#430781,#430789,#430791,.T.); +#430789 = VERTEX_POINT('',#430790); +#430790 = CARTESIAN_POINT('',(145.502843,-154.247829,1.585)); +#430791 = CIRCLE('',#430792,7.500005951701E-02); +#430792 = AXIS2_PLACEMENT_3D('',#430793,#430794,#430795); +#430793 = CARTESIAN_POINT('',(145.56428506294,-154.2048187473,1.585)); +#430794 = DIRECTION('',(0.,0.,-1.)); +#430795 = DIRECTION('',(0.915371767707,0.402609645791,0.)); +#430796 = ORIENTED_EDGE('',*,*,#430797,.T.); +#430797 = EDGE_CURVE('',#430789,#430798,#430800,.T.); +#430798 = VERTEX_POINT('',#430799); +#430799 = CARTESIAN_POINT('',(145.191903,-153.803628,1.585)); +#430800 = LINE('',#430801,#430802); +#430801 = CARTESIAN_POINT('',(145.502843,-154.247829,1.585)); +#430802 = VECTOR('',#430803,1.); +#430803 = DIRECTION('',(-0.573461477921,0.819232527028,0.)); +#430804 = ORIENTED_EDGE('',*,*,#430805,.T.); +#430805 = EDGE_CURVE('',#430798,#430806,#430808,.T.); +#430806 = VERTEX_POINT('',#430807); +#430807 = CARTESIAN_POINT('',(145.067857,-153.803628,1.585)); +#430808 = LINE('',#430809,#430810); +#430809 = CARTESIAN_POINT('',(145.191903,-153.803628,1.585)); +#430810 = VECTOR('',#430811,1.); +#430811 = DIRECTION('',(-1.,0.,0.)); +#430812 = ORIENTED_EDGE('',*,*,#430813,.T.); +#430813 = EDGE_CURVE('',#430806,#430814,#430816,.T.); +#430814 = VERTEX_POINT('',#430815); +#430815 = CARTESIAN_POINT('',(145.066416,-154.219451,1.585)); +#430816 = LINE('',#430817,#430818); +#430817 = CARTESIAN_POINT('',(145.067857,-153.803628,1.585)); +#430818 = VECTOR('',#430819,1.); +#430819 = DIRECTION('',(-3.465395967783E-03,-0.999993995497,0.)); +#430820 = ORIENTED_EDGE('',*,*,#430821,.T.); +#430821 = EDGE_CURVE('',#430814,#430822,#430824,.T.); +#430822 = VERTEX_POINT('',#430823); +#430823 = CARTESIAN_POINT('',(144.917857,-154.204819,1.585)); +#430824 = CIRCLE('',#430825,7.500006711463E-02); +#430825 = AXIS2_PLACEMENT_3D('',#430826,#430827,#430828); +#430826 = CARTESIAN_POINT('',(144.99285706711,-154.2048190671,1.585)); +#430827 = DIRECTION('',(-0.,0.,-1.)); +#430828 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#430829 = ORIENTED_EDGE('',*,*,#430830,.T.); +#430830 = EDGE_CURVE('',#430822,#430728,#430831,.T.); +#430831 = LINE('',#430832,#430833); +#430832 = CARTESIAN_POINT('',(144.917857,-154.204819,1.585)); +#430833 = VECTOR('',#430834,1.); +#430834 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#430835 = FACE_BOUND('',#430836,.F.); +#430836 = EDGE_LOOP('',(#430837,#430848,#430856,#430864,#430872,#430881) + ); +#430837 = ORIENTED_EDGE('',*,*,#430838,.T.); +#430838 = EDGE_CURVE('',#430839,#430841,#430843,.T.); +#430839 = VERTEX_POINT('',#430840); +#430840 = CARTESIAN_POINT('',(145.489285,-153.413,1.585)); +#430841 = VERTEX_POINT('',#430842); +#430842 = CARTESIAN_POINT('',(145.356104,-153.279819,1.585)); +#430843 = CIRCLE('',#430844,0.18686440374); +#430844 = AXIS2_PLACEMENT_3D('',#430845,#430846,#430847); +#430845 = CARTESIAN_POINT('',(145.308568,-153.460536,1.585)); +#430846 = DIRECTION('',(0.,0.,1.)); +#430847 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#430848 = ORIENTED_EDGE('',*,*,#430849,.T.); +#430849 = EDGE_CURVE('',#430841,#430850,#430852,.T.); +#430850 = VERTEX_POINT('',#430851); +#430851 = CARTESIAN_POINT('',(145.067857,-153.279819,1.585)); +#430852 = LINE('',#430853,#430854); +#430853 = CARTESIAN_POINT('',(145.356104,-153.279819,1.585)); +#430854 = VECTOR('',#430855,1.); +#430855 = DIRECTION('',(-1.,0.,0.)); +#430856 = ORIENTED_EDGE('',*,*,#430857,.T.); +#430857 = EDGE_CURVE('',#430850,#430858,#430860,.T.); +#430858 = VERTEX_POINT('',#430859); +#430859 = CARTESIAN_POINT('',(145.067857,-153.653628,1.585)); +#430860 = LINE('',#430861,#430862); +#430861 = CARTESIAN_POINT('',(145.067857,-153.279819,1.585)); +#430862 = VECTOR('',#430863,1.); +#430863 = DIRECTION('',(0.,-1.,0.)); +#430864 = ORIENTED_EDGE('',*,*,#430865,.T.); +#430865 = EDGE_CURVE('',#430858,#430866,#430868,.T.); +#430866 = VERTEX_POINT('',#430867); +#430867 = CARTESIAN_POINT('',(145.356104,-153.653628,1.585)); +#430868 = LINE('',#430869,#430870); +#430869 = CARTESIAN_POINT('',(145.067857,-153.653628,1.585)); +#430870 = VECTOR('',#430871,1.); +#430871 = DIRECTION('',(1.,0.,0.)); +#430872 = ORIENTED_EDGE('',*,*,#430873,.T.); +#430873 = EDGE_CURVE('',#430866,#430874,#430876,.T.); +#430874 = VERTEX_POINT('',#430875); +#430875 = CARTESIAN_POINT('',(145.489285,-153.520447,1.585)); +#430876 = CIRCLE('',#430877,0.18686440374); +#430877 = AXIS2_PLACEMENT_3D('',#430878,#430879,#430880); +#430878 = CARTESIAN_POINT('',(145.308568,-153.472911,1.585)); +#430879 = DIRECTION('',(0.,0.,1.)); +#430880 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#430881 = ORIENTED_EDGE('',*,*,#430882,.T.); +#430882 = EDGE_CURVE('',#430874,#430839,#430883,.T.); +#430883 = LINE('',#430884,#430885); +#430884 = CARTESIAN_POINT('',(145.489285,-153.520447,1.585)); +#430885 = VECTOR('',#430886,1.); +#430886 = DIRECTION('',(0.,1.,0.)); +#430887 = PLANE('',#430888); +#430888 = AXIS2_PLACEMENT_3D('',#430889,#430890,#430891); +#430889 = CARTESIAN_POINT('',(0.,0.,1.585)); +#430890 = DIRECTION('',(0.,0.,1.)); +#430891 = DIRECTION('',(1.,0.,-0.)); +#430892 = SHELL_BASED_SURFACE_MODEL('',(#430893)); +#430893 = OPEN_SHELL('',(#430894)); +#430894 = ADVANCED_FACE('',(#430895,#431011),#431094,.T.); +#430895 = FACE_BOUND('',#430896,.F.); +#430896 = EDGE_LOOP('',(#430897,#430908,#430916,#430924,#430932,#430940, + #430948,#430956,#430964,#430972,#430980,#430988,#430996,#431005)); +#430897 = ORIENTED_EDGE('',*,*,#430898,.T.); +#430898 = EDGE_CURVE('',#430899,#430901,#430903,.T.); +#430899 = VERTEX_POINT('',#430900); +#430900 = CARTESIAN_POINT('',(143.157393,-153.190187,1.585)); +#430901 = VERTEX_POINT('',#430902); +#430902 = CARTESIAN_POINT('',(143.230952,-153.129819,1.585)); +#430903 = CIRCLE('',#430904,7.500074938978E-02); +#430904 = AXIS2_PLACEMENT_3D('',#430905,#430906,#430907); +#430905 = CARTESIAN_POINT('',(143.23095246611,-153.2048197493,1.585)); +#430906 = DIRECTION('',(0.,0.,-1.)); +#430907 = DIRECTION('',(-0.980783081614,0.195101375751,0.)); +#430908 = ORIENTED_EDGE('',*,*,#430909,.T.); +#430909 = EDGE_CURVE('',#430901,#430910,#430912,.T.); +#430910 = VERTEX_POINT('',#430911); +#430911 = CARTESIAN_POINT('',(143.476452,-153.130548,1.585)); +#430912 = LINE('',#430913,#430914); +#430913 = CARTESIAN_POINT('',(143.230952,-153.129819,1.585)); +#430914 = VECTOR('',#430915,1.); +#430915 = DIRECTION('',(0.999995591212,-2.969437010186E-03,0.)); +#430916 = ORIENTED_EDGE('',*,*,#430917,.T.); +#430917 = EDGE_CURVE('',#430910,#430918,#430920,.T.); +#430918 = VERTEX_POINT('',#430919); +#430919 = CARTESIAN_POINT('',(143.653572,-153.190078,1.585)); +#430920 = LINE('',#430921,#430922); +#430921 = CARTESIAN_POINT('',(143.476452,-153.130548,1.585)); +#430922 = VECTOR('',#430923,1.); +#430923 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#430924 = ORIENTED_EDGE('',*,*,#430925,.T.); +#430925 = EDGE_CURVE('',#430918,#430926,#430928,.T.); +#430926 = VERTEX_POINT('',#430927); +#430927 = CARTESIAN_POINT('',(143.770261,-153.30784,1.585)); +#430928 = LINE('',#430929,#430930); +#430929 = CARTESIAN_POINT('',(143.653572,-153.190078,1.585)); +#430930 = VECTOR('',#430931,1.); +#430931 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#430932 = ORIENTED_EDGE('',*,*,#430933,.T.); +#430933 = EDGE_CURVE('',#430926,#430934,#430936,.T.); +#430934 = VERTEX_POINT('',#430935); +#430935 = CARTESIAN_POINT('',(143.827522,-153.424724,1.585)); +#430936 = LINE('',#430937,#430938); +#430937 = CARTESIAN_POINT('',(143.770261,-153.30784,1.585)); +#430938 = VECTOR('',#430939,1.); +#430939 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#430940 = ORIENTED_EDGE('',*,*,#430941,.T.); +#430941 = EDGE_CURVE('',#430934,#430942,#430944,.T.); +#430942 = VERTEX_POINT('',#430943); +#430943 = CARTESIAN_POINT('',(143.87738,-153.63339,1.585)); +#430944 = LINE('',#430945,#430946); +#430945 = CARTESIAN_POINT('',(143.827522,-153.424724,1.585)); +#430946 = VECTOR('',#430947,1.); +#430947 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#430948 = ORIENTED_EDGE('',*,*,#430949,.T.); +#430949 = EDGE_CURVE('',#430942,#430950,#430952,.T.); +#430950 = VERTEX_POINT('',#430951); +#430951 = CARTESIAN_POINT('',(143.875141,-153.794437,1.585)); +#430952 = LINE('',#430953,#430954); +#430953 = CARTESIAN_POINT('',(143.87738,-153.63339,1.585)); +#430954 = VECTOR('',#430955,1.); +#430955 = DIRECTION('',(-1.39014303055E-02,-0.999903370449,0.)); +#430956 = ORIENTED_EDGE('',*,*,#430957,.T.); +#430957 = EDGE_CURVE('',#430950,#430958,#430960,.T.); +#430958 = VERTEX_POINT('',#430959); +#430959 = CARTESIAN_POINT('',(143.821843,-154.000264,1.585)); +#430960 = LINE('',#430961,#430962); +#430961 = CARTESIAN_POINT('',(143.875141,-153.794437,1.585)); +#430962 = VECTOR('',#430963,1.); +#430963 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#430964 = ORIENTED_EDGE('',*,*,#430965,.T.); +#430965 = EDGE_CURVE('',#430958,#430966,#430968,.T.); +#430966 = VERTEX_POINT('',#430967); +#430967 = CARTESIAN_POINT('',(143.764893,-154.109244,1.585)); +#430968 = LINE('',#430969,#430970); +#430969 = CARTESIAN_POINT('',(143.821843,-154.000264,1.585)); +#430970 = VECTOR('',#430971,1.); +#430971 = DIRECTION('',(-0.463146784147,-0.886281589752,0.)); +#430972 = ORIENTED_EDGE('',*,*,#430973,.T.); +#430973 = EDGE_CURVE('',#430966,#430974,#430976,.T.); +#430974 = VERTEX_POINT('',#430975); +#430975 = CARTESIAN_POINT('',(143.649046,-154.222357,1.585)); +#430976 = LINE('',#430977,#430978); +#430977 = CARTESIAN_POINT('',(143.764893,-154.109244,1.585)); +#430978 = VECTOR('',#430979,1.); +#430979 = DIRECTION('',(-0.715499299798,-0.698613449619,0.)); +#430980 = ORIENTED_EDGE('',*,*,#430981,.T.); +#430981 = EDGE_CURVE('',#430974,#430982,#430984,.T.); +#430982 = VERTEX_POINT('',#430983); +#430983 = CARTESIAN_POINT('',(143.476452,-154.279089,1.585)); +#430984 = LINE('',#430985,#430986); +#430985 = CARTESIAN_POINT('',(143.649046,-154.222357,1.585)); +#430986 = VECTOR('',#430987,1.); +#430987 = DIRECTION('',(-0.949994945594,-0.312265277202,0.)); +#430988 = ORIENTED_EDGE('',*,*,#430989,.T.); +#430989 = EDGE_CURVE('',#430982,#430990,#430992,.T.); +#430990 = VERTEX_POINT('',#430991); +#430991 = CARTESIAN_POINT('',(143.21632,-154.278378,1.585)); +#430992 = LINE('',#430993,#430994); +#430993 = CARTESIAN_POINT('',(143.476452,-154.279089,1.585)); +#430994 = VECTOR('',#430995,1.); +#430995 = DIRECTION('',(-0.999996264754,2.733217536618E-03,0.)); +#430996 = ORIENTED_EDGE('',*,*,#430997,.T.); +#430997 = EDGE_CURVE('',#430990,#430998,#431000,.T.); +#430998 = VERTEX_POINT('',#430999); +#430999 = CARTESIAN_POINT('',(143.155952,-154.204819,1.585)); +#431000 = CIRCLE('',#431001,7.500074938983E-02); +#431001 = AXIS2_PLACEMENT_3D('',#431002,#431003,#431004); +#431002 = CARTESIAN_POINT('',(143.23095274938,-154.2048185338,1.585)); +#431003 = DIRECTION('',(0.,0.,-1.)); +#431004 = DIRECTION('',(-0.195101375752,-0.980783081614,-0.)); +#431005 = ORIENTED_EDGE('',*,*,#431006,.T.); +#431006 = EDGE_CURVE('',#430998,#430899,#431007,.T.); +#431007 = LINE('',#431008,#431009); +#431008 = CARTESIAN_POINT('',(143.155952,-154.204819,1.585)); +#431009 = VECTOR('',#431010,1.); +#431010 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#431011 = FACE_BOUND('',#431012,.F.); +#431012 = EDGE_LOOP('',(#431013,#431023,#431031,#431039,#431047,#431055, + #431063,#431072,#431080,#431088)); +#431013 = ORIENTED_EDGE('',*,*,#431014,.T.); +#431014 = EDGE_CURVE('',#431015,#431017,#431019,.T.); +#431015 = VERTEX_POINT('',#431016); +#431016 = CARTESIAN_POINT('',(143.57139,-153.31799,1.585)); +#431017 = VERTEX_POINT('',#431018); +#431018 = CARTESIAN_POINT('',(143.456877,-153.279819,1.585)); +#431019 = LINE('',#431020,#431021); +#431020 = CARTESIAN_POINT('',(143.57139,-153.31799,1.585)); +#431021 = VECTOR('',#431022,1.); +#431022 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#431023 = ORIENTED_EDGE('',*,*,#431024,.T.); +#431024 = EDGE_CURVE('',#431017,#431025,#431027,.T.); +#431025 = VERTEX_POINT('',#431026); +#431026 = CARTESIAN_POINT('',(143.305952,-153.279819,1.585)); +#431027 = LINE('',#431028,#431029); +#431028 = CARTESIAN_POINT('',(143.456877,-153.279819,1.585)); +#431029 = VECTOR('',#431030,1.); +#431030 = DIRECTION('',(-1.,0.,0.)); +#431031 = ORIENTED_EDGE('',*,*,#431032,.T.); +#431032 = EDGE_CURVE('',#431025,#431033,#431035,.T.); +#431033 = VERTEX_POINT('',#431034); +#431034 = CARTESIAN_POINT('',(143.305952,-154.129819,1.585)); +#431035 = LINE('',#431036,#431037); +#431036 = CARTESIAN_POINT('',(143.305952,-153.279819,1.585)); +#431037 = VECTOR('',#431038,1.); +#431038 = DIRECTION('',(0.,-1.,0.)); +#431039 = ORIENTED_EDGE('',*,*,#431040,.T.); +#431040 = EDGE_CURVE('',#431033,#431041,#431043,.T.); +#431041 = VERTEX_POINT('',#431042); +#431042 = CARTESIAN_POINT('',(143.456877,-154.129819,1.585)); +#431043 = LINE('',#431044,#431045); +#431044 = CARTESIAN_POINT('',(143.305952,-154.129819,1.585)); +#431045 = VECTOR('',#431046,1.); +#431046 = DIRECTION('',(1.,0.,0.)); +#431047 = ORIENTED_EDGE('',*,*,#431048,.T.); +#431048 = EDGE_CURVE('',#431041,#431049,#431051,.T.); +#431049 = VERTEX_POINT('',#431050); +#431050 = CARTESIAN_POINT('',(143.57139,-154.091647,1.585)); +#431051 = LINE('',#431052,#431053); +#431052 = CARTESIAN_POINT('',(143.456877,-154.129819,1.585)); +#431053 = VECTOR('',#431054,1.); +#431054 = DIRECTION('',(0.948680812677,0.31623522204,0.)); +#431055 = ORIENTED_EDGE('',*,*,#431056,.T.); +#431056 = EDGE_CURVE('',#431049,#431057,#431059,.T.); +#431057 = VERTEX_POINT('',#431058); +#431058 = CARTESIAN_POINT('',(143.645502,-154.017534,1.585)); +#431059 = LINE('',#431060,#431061); +#431060 = CARTESIAN_POINT('',(143.57139,-154.091647,1.585)); +#431061 = VECTOR('',#431062,1.); +#431062 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#431063 = ORIENTED_EDGE('',*,*,#431064,.T.); +#431064 = EDGE_CURVE('',#431057,#431065,#431067,.T.); +#431065 = VERTEX_POINT('',#431066); +#431066 = CARTESIAN_POINT('',(143.72738,-153.642624,1.585)); +#431067 = CIRCLE('',#431068,0.611719141131); +#431068 = AXIS2_PLACEMENT_3D('',#431069,#431070,#431071); +#431069 = CARTESIAN_POINT('',(143.11896796224,-153.7061464364,1.585)); +#431070 = DIRECTION('',(0.,0.,1.)); +#431071 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#431072 = ORIENTED_EDGE('',*,*,#431073,.T.); +#431073 = EDGE_CURVE('',#431065,#431074,#431076,.T.); +#431074 = VERTEX_POINT('',#431075); +#431075 = CARTESIAN_POINT('',(143.683996,-153.46909,1.585)); +#431076 = LINE('',#431077,#431078); +#431077 = CARTESIAN_POINT('',(143.72738,-153.642624,1.585)); +#431078 = VECTOR('',#431079,1.); +#431079 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#431080 = ORIENTED_EDGE('',*,*,#431081,.T.); +#431081 = EDGE_CURVE('',#431074,#431082,#431084,.T.); +#431082 = VERTEX_POINT('',#431083); +#431083 = CARTESIAN_POINT('',(143.645503,-153.392103,1.585)); +#431084 = LINE('',#431085,#431086); +#431085 = CARTESIAN_POINT('',(143.683996,-153.46909,1.585)); +#431086 = VECTOR('',#431087,1.); +#431087 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#431088 = ORIENTED_EDGE('',*,*,#431089,.T.); +#431089 = EDGE_CURVE('',#431082,#431015,#431090,.T.); +#431090 = LINE('',#431091,#431092); +#431091 = CARTESIAN_POINT('',(143.645503,-153.392103,1.585)); +#431092 = VECTOR('',#431093,1.); +#431093 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#431094 = PLANE('',#431095); +#431095 = AXIS2_PLACEMENT_3D('',#431096,#431097,#431098); +#431096 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431097 = DIRECTION('',(0.,0.,1.)); +#431098 = DIRECTION('',(1.,0.,-0.)); +#431099 = SHELL_BASED_SURFACE_MODEL('',(#431100)); +#431100 = OPEN_SHELL('',(#431101)); +#431101 = ADVANCED_FACE('',(#431102),#431350,.T.); +#431102 = FACE_BOUND('',#431103,.F.); +#431103 = EDGE_LOOP('',(#431104,#431114,#431122,#431130,#431138,#431147, + #431155,#431163,#431171,#431179,#431188,#431196,#431204,#431212, + #431221,#431229,#431237,#431245,#431254,#431262,#431271,#431279, + #431287,#431295,#431304,#431312,#431320,#431328,#431336,#431344)); +#431104 = ORIENTED_EDGE('',*,*,#431105,.T.); +#431105 = EDGE_CURVE('',#431106,#431108,#431110,.T.); +#431106 = VERTEX_POINT('',#431107); +#431107 = CARTESIAN_POINT('',(145.982724,-153.300392,1.585)); +#431108 = VERTEX_POINT('',#431109); +#431109 = CARTESIAN_POINT('',(146.098571,-153.187281,1.585)); +#431110 = LINE('',#431111,#431112); +#431111 = CARTESIAN_POINT('',(145.982724,-153.300392,1.585)); +#431112 = VECTOR('',#431113,1.); +#431113 = DIRECTION('',(0.715505474306,0.698607125814,0.)); +#431114 = ORIENTED_EDGE('',*,*,#431115,.T.); +#431115 = EDGE_CURVE('',#431108,#431116,#431118,.T.); +#431116 = VERTEX_POINT('',#431117); +#431117 = CARTESIAN_POINT('',(146.271164,-153.130548,1.585)); +#431118 = LINE('',#431119,#431120); +#431119 = CARTESIAN_POINT('',(146.098571,-153.187281,1.585)); +#431120 = VECTOR('',#431121,1.); +#431121 = DIRECTION('',(0.949992776021,0.31227187755,0.)); +#431122 = ORIENTED_EDGE('',*,*,#431123,.T.); +#431123 = EDGE_CURVE('',#431116,#431124,#431126,.T.); +#431124 = VERTEX_POINT('',#431125); +#431125 = CARTESIAN_POINT('',(146.43606,-153.13126,1.585)); +#431126 = LINE('',#431127,#431128); +#431127 = CARTESIAN_POINT('',(146.271164,-153.130548,1.585)); +#431128 = VECTOR('',#431129,1.); +#431129 = DIRECTION('',(0.999990678116,-4.317832832887E-03,0.)); +#431130 = ORIENTED_EDGE('',*,*,#431131,.T.); +#431131 = EDGE_CURVE('',#431124,#431132,#431134,.T.); +#431132 = VERTEX_POINT('',#431133); +#431133 = CARTESIAN_POINT('',(146.56265,-153.193188,1.585)); +#431134 = LINE('',#431135,#431136); +#431135 = CARTESIAN_POINT('',(146.43606,-153.13126,1.585)); +#431136 = VECTOR('',#431137,1.); +#431137 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#431138 = ORIENTED_EDGE('',*,*,#431139,.T.); +#431139 = EDGE_CURVE('',#431132,#431140,#431142,.T.); +#431140 = VERTEX_POINT('',#431141); +#431141 = CARTESIAN_POINT('',(146.483125,-153.31952,1.585)); +#431142 = CIRCLE('',#431143,7.500029440362E-02); +#431143 = AXIS2_PLACEMENT_3D('',#431144,#431145,#431146); +#431144 = CARTESIAN_POINT('',(146.51666605397,-153.2524376486,1.585)); +#431145 = DIRECTION('',(0.,0.,-1.)); +#431146 = DIRECTION('',(0.613116873665,0.789992214662,0.)); +#431147 = ORIENTED_EDGE('',*,*,#431148,.T.); +#431148 = EDGE_CURVE('',#431140,#431149,#431151,.T.); +#431149 = VERTEX_POINT('',#431150); +#431150 = CARTESIAN_POINT('',(146.403723,-153.279819,1.585)); +#431151 = LINE('',#431152,#431153); +#431152 = CARTESIAN_POINT('',(146.483125,-153.31952,1.585)); +#431153 = VECTOR('',#431154,1.); +#431154 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#431155 = ORIENTED_EDGE('',*,*,#431156,.T.); +#431156 = EDGE_CURVE('',#431149,#431157,#431159,.T.); +#431157 = VERTEX_POINT('',#431158); +#431158 = CARTESIAN_POINT('',(146.290741,-153.279819,1.585)); +#431159 = LINE('',#431160,#431161); +#431160 = CARTESIAN_POINT('',(146.403723,-153.279819,1.585)); +#431161 = VECTOR('',#431162,1.); +#431162 = DIRECTION('',(-1.,0.,0.)); +#431163 = ORIENTED_EDGE('',*,*,#431164,.T.); +#431164 = EDGE_CURVE('',#431157,#431165,#431167,.T.); +#431165 = VERTEX_POINT('',#431166); +#431166 = CARTESIAN_POINT('',(146.176228,-153.31799,1.585)); +#431167 = LINE('',#431168,#431169); +#431168 = CARTESIAN_POINT('',(146.290741,-153.279819,1.585)); +#431169 = VECTOR('',#431170,1.); +#431170 = DIRECTION('',(-0.94868329805,-0.316227766017,0.)); +#431171 = ORIENTED_EDGE('',*,*,#431172,.T.); +#431172 = EDGE_CURVE('',#431165,#431173,#431175,.T.); +#431173 = VERTEX_POINT('',#431174); +#431174 = CARTESIAN_POINT('',(146.102115,-153.392103,1.585)); +#431175 = LINE('',#431176,#431177); +#431176 = CARTESIAN_POINT('',(146.176228,-153.31799,1.585)); +#431177 = VECTOR('',#431178,1.); +#431178 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#431179 = ORIENTED_EDGE('',*,*,#431180,.T.); +#431180 = EDGE_CURVE('',#431173,#431181,#431183,.T.); +#431181 = VERTEX_POINT('',#431182); +#431182 = CARTESIAN_POINT('',(146.020238,-153.767013,1.585)); +#431183 = CIRCLE('',#431184,0.611712714363); +#431184 = AXIS2_PLACEMENT_3D('',#431185,#431186,#431187); +#431185 = CARTESIAN_POINT('',(146.62864327521,-153.7034876822,1.585)); +#431186 = DIRECTION('',(0.,0.,1.)); +#431187 = DIRECTION('',(-0.860744370444,0.509037453188,0.)); +#431188 = ORIENTED_EDGE('',*,*,#431189,.T.); +#431189 = EDGE_CURVE('',#431181,#431190,#431192,.T.); +#431190 = VERTEX_POINT('',#431191); +#431191 = CARTESIAN_POINT('',(146.063621,-153.940547,1.585)); +#431192 = LINE('',#431193,#431194); +#431193 = CARTESIAN_POINT('',(146.020238,-153.767013,1.585)); +#431194 = VECTOR('',#431195,1.); +#431195 = DIRECTION('',(0.242532994208,-0.970143157849,0.)); +#431196 = ORIENTED_EDGE('',*,*,#431197,.T.); +#431197 = EDGE_CURVE('',#431190,#431198,#431200,.T.); +#431198 = VERTEX_POINT('',#431199); +#431199 = CARTESIAN_POINT('',(146.102115,-154.017534,1.585)); +#431200 = LINE('',#431201,#431202); +#431201 = CARTESIAN_POINT('',(146.063621,-153.940547,1.585)); +#431202 = VECTOR('',#431203,1.); +#431203 = DIRECTION('',(0.447218242641,-0.894424867414,0.)); +#431204 = ORIENTED_EDGE('',*,*,#431205,.T.); +#431205 = EDGE_CURVE('',#431198,#431206,#431208,.T.); +#431206 = VERTEX_POINT('',#431207); +#431207 = CARTESIAN_POINT('',(146.176228,-154.091648,1.585)); +#431208 = LINE('',#431209,#431210); +#431209 = CARTESIAN_POINT('',(146.102115,-154.017534,1.585)); +#431210 = VECTOR('',#431211,1.); +#431211 = DIRECTION('',(0.707102010739,-0.707111551602,0.)); +#431212 = ORIENTED_EDGE('',*,*,#431213,.T.); +#431213 = EDGE_CURVE('',#431206,#431214,#431216,.T.); +#431214 = VERTEX_POINT('',#431215); +#431215 = CARTESIAN_POINT('',(146.476152,-154.091647,1.585)); +#431216 = CIRCLE('',#431217,0.299305962385); +#431217 = AXIS2_PLACEMENT_3D('',#431218,#431219,#431220); +#431218 = CARTESIAN_POINT('',(146.32618913635,-153.8326195909,1.585)); +#431219 = DIRECTION('',(0.,0.,1.)); +#431220 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#431221 = ORIENTED_EDGE('',*,*,#431222,.T.); +#431222 = EDGE_CURVE('',#431214,#431223,#431225,.T.); +#431223 = VERTEX_POINT('',#431224); +#431224 = CARTESIAN_POINT('',(146.489285,-154.078514,1.585)); +#431225 = LINE('',#431226,#431227); +#431226 = CARTESIAN_POINT('',(146.476152,-154.091647,1.585)); +#431227 = VECTOR('',#431228,1.); +#431228 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#431229 = ORIENTED_EDGE('',*,*,#431230,.T.); +#431230 = EDGE_CURVE('',#431223,#431231,#431233,.T.); +#431231 = VERTEX_POINT('',#431232); +#431232 = CARTESIAN_POINT('',(146.489285,-153.851247,1.585)); +#431233 = LINE('',#431234,#431235); +#431234 = CARTESIAN_POINT('',(146.489285,-154.078514,1.585)); +#431235 = VECTOR('',#431236,1.); +#431236 = DIRECTION('',(0.,1.,0.)); +#431237 = ORIENTED_EDGE('',*,*,#431238,.T.); +#431238 = EDGE_CURVE('',#431231,#431239,#431241,.T.); +#431239 = VERTEX_POINT('',#431240); +#431240 = CARTESIAN_POINT('',(146.359177,-153.849806,1.585)); +#431241 = LINE('',#431242,#431243); +#431242 = CARTESIAN_POINT('',(146.489285,-153.851247,1.585)); +#431243 = VECTOR('',#431244,1.); +#431244 = DIRECTION('',(-0.999938673241,1.107473505196E-02,0.)); +#431245 = ORIENTED_EDGE('',*,*,#431246,.T.); +#431246 = EDGE_CURVE('',#431239,#431247,#431249,.T.); +#431247 = VERTEX_POINT('',#431248); +#431248 = CARTESIAN_POINT('',(146.373809,-153.701247,1.585)); +#431249 = CIRCLE('',#431250,7.500006711464E-02); +#431250 = AXIS2_PLACEMENT_3D('',#431251,#431252,#431253); +#431251 = CARTESIAN_POINT('',(146.37380893288,-153.7762470671,1.585)); +#431252 = DIRECTION('',(0.,0.,-1.)); +#431253 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#431254 = ORIENTED_EDGE('',*,*,#431255,.T.); +#431255 = EDGE_CURVE('',#431247,#431256,#431258,.T.); +#431256 = VERTEX_POINT('',#431257); +#431257 = CARTESIAN_POINT('',(146.578917,-153.702688,1.585)); +#431258 = LINE('',#431259,#431260); +#431259 = CARTESIAN_POINT('',(146.373809,-153.701247,1.585)); +#431260 = VECTOR('',#431261,1.); +#431261 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#431262 = ORIENTED_EDGE('',*,*,#431263,.T.); +#431263 = EDGE_CURVE('',#431256,#431264,#431266,.T.); +#431264 = VERTEX_POINT('',#431265); +#431265 = CARTESIAN_POINT('',(146.639285,-153.776247,1.585)); +#431266 = CIRCLE('',#431267,7.500074938985E-02); +#431267 = AXIS2_PLACEMENT_3D('',#431268,#431269,#431270); +#431268 = CARTESIAN_POINT('',(146.56428425061,-153.7762474661,1.585)); +#431269 = DIRECTION('',(0.,0.,-1.)); +#431270 = DIRECTION('',(0.195101375752,0.980783081614,0.)); +#431271 = ORIENTED_EDGE('',*,*,#431272,.T.); +#431272 = EDGE_CURVE('',#431264,#431273,#431275,.T.); +#431273 = VERTEX_POINT('',#431274); +#431274 = CARTESIAN_POINT('',(146.637844,-154.124212,1.585)); +#431275 = LINE('',#431276,#431277); +#431276 = CARTESIAN_POINT('',(146.639285,-153.776247,1.585)); +#431277 = VECTOR('',#431278,1.); +#431278 = DIRECTION('',(-4.141185589905E-03,-0.999991425254,0.)); +#431279 = ORIENTED_EDGE('',*,*,#431280,.T.); +#431280 = EDGE_CURVE('',#431273,#431281,#431283,.T.); +#431281 = VERTEX_POINT('',#431282); +#431282 = CARTESIAN_POINT('',(146.617318,-154.162613,1.585)); +#431283 = LINE('',#431284,#431285); +#431284 = CARTESIAN_POINT('',(146.637844,-154.124212,1.585)); +#431285 = VECTOR('',#431286,1.); +#431286 = DIRECTION('',(-0.471400985779,-0.881918993223,0.)); +#431287 = ORIENTED_EDGE('',*,*,#431288,.T.); +#431288 = EDGE_CURVE('',#431281,#431289,#431291,.T.); +#431289 = VERTEX_POINT('',#431290); +#431290 = CARTESIAN_POINT('',(146.553808,-154.222357,1.585)); +#431291 = LINE('',#431292,#431293); +#431292 = CARTESIAN_POINT('',(146.617318,-154.162613,1.585)); +#431293 = VECTOR('',#431294,1.); +#431294 = DIRECTION('',(-0.728372356766,-0.685181516023,0.)); +#431295 = ORIENTED_EDGE('',*,*,#431296,.T.); +#431296 = EDGE_CURVE('',#431289,#431297,#431299,.T.); +#431297 = VERTEX_POINT('',#431298); +#431298 = CARTESIAN_POINT('',(146.094046,-154.219561,1.585)); +#431299 = CIRCLE('',#431300,0.461067828848); +#431300 = AXIS2_PLACEMENT_3D('',#431301,#431302,#431303); +#431301 = CARTESIAN_POINT('',(146.32635751268,-153.8212961335,1.585)); +#431302 = DIRECTION('',(-0.,0.,-1.)); +#431303 = DIRECTION('',(0.493312421905,-0.869852202615,-0.)); +#431304 = ORIENTED_EDGE('',*,*,#431305,.T.); +#431305 = EDGE_CURVE('',#431297,#431306,#431308,.T.); +#431306 = VERTEX_POINT('',#431307); +#431307 = CARTESIAN_POINT('',(145.977357,-154.101798,1.585)); +#431308 = LINE('',#431309,#431310); +#431309 = CARTESIAN_POINT('',(146.094046,-154.219561,1.585)); +#431310 = VECTOR('',#431311,1.); +#431311 = DIRECTION('',(-0.703860214178,0.710338510076,0.)); +#431312 = ORIENTED_EDGE('',*,*,#431313,.T.); +#431313 = EDGE_CURVE('',#431306,#431314,#431316,.T.); +#431314 = VERTEX_POINT('',#431315); +#431315 = CARTESIAN_POINT('',(145.920096,-153.984913,1.585)); +#431316 = LINE('',#431317,#431318); +#431317 = CARTESIAN_POINT('',(145.977357,-154.101798,1.585)); +#431318 = VECTOR('',#431319,1.); +#431319 = DIRECTION('',(-0.439936873317,0.89802870082,0.)); +#431320 = ORIENTED_EDGE('',*,*,#431321,.T.); +#431321 = EDGE_CURVE('',#431314,#431322,#431324,.T.); +#431322 = VERTEX_POINT('',#431323); +#431323 = CARTESIAN_POINT('',(145.870238,-153.776247,1.585)); +#431324 = LINE('',#431325,#431326); +#431325 = CARTESIAN_POINT('',(145.920096,-153.984913,1.585)); +#431326 = VECTOR('',#431327,1.); +#431327 = DIRECTION('',(-0.232395123349,0.972621461126,0.)); +#431328 = ORIENTED_EDGE('',*,*,#431329,.T.); +#431329 = EDGE_CURVE('',#431322,#431330,#431332,.T.); +#431330 = VERTEX_POINT('',#431331); +#431331 = CARTESIAN_POINT('',(145.872477,-153.6152,1.585)); +#431332 = LINE('',#431333,#431334); +#431333 = CARTESIAN_POINT('',(145.870238,-153.776247,1.585)); +#431334 = VECTOR('',#431335,1.); +#431335 = DIRECTION('',(1.390143030568E-02,0.999903370449,0.)); +#431336 = ORIENTED_EDGE('',*,*,#431337,.T.); +#431337 = EDGE_CURVE('',#431330,#431338,#431340,.T.); +#431338 = VERTEX_POINT('',#431339); +#431339 = CARTESIAN_POINT('',(145.925775,-153.409373,1.585)); +#431340 = LINE('',#431341,#431342); +#431341 = CARTESIAN_POINT('',(145.872477,-153.6152,1.585)); +#431342 = VECTOR('',#431343,1.); +#431343 = DIRECTION('',(0.250677645339,0.968070616292,0.)); +#431344 = ORIENTED_EDGE('',*,*,#431345,.T.); +#431345 = EDGE_CURVE('',#431338,#431106,#431346,.T.); +#431346 = LINE('',#431347,#431348); +#431347 = CARTESIAN_POINT('',(145.925775,-153.409373,1.585)); +#431348 = VECTOR('',#431349,1.); +#431349 = DIRECTION('',(0.463137057879,0.886286672369,0.)); +#431350 = PLANE('',#431351); +#431351 = AXIS2_PLACEMENT_3D('',#431352,#431353,#431354); +#431352 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431353 = DIRECTION('',(0.,0.,1.)); +#431354 = DIRECTION('',(1.,0.,-0.)); +#431355 = SHELL_BASED_SURFACE_MODEL('',(#431356)); +#431356 = OPEN_SHELL('',(#431357)); +#431357 = ADVANCED_FACE('',(#431358,#431476,#431543),#431595,.T.); +#431358 = FACE_BOUND('',#431359,.F.); +#431359 = EDGE_LOOP('',(#431360,#431371,#431379,#431388,#431396,#431404, + #431412,#431420,#431428,#431437,#431445,#431454,#431462,#431470)); +#431360 = ORIENTED_EDGE('',*,*,#431361,.T.); +#431361 = EDGE_CURVE('',#431362,#431364,#431366,.T.); +#431362 = VERTEX_POINT('',#431363); +#431363 = CARTESIAN_POINT('',(146.919298,-153.190187,1.585)); +#431364 = VERTEX_POINT('',#431365); +#431365 = CARTESIAN_POINT('',(146.992857,-153.129819,1.585)); +#431366 = CIRCLE('',#431367,7.50007493899E-02); +#431367 = AXIS2_PLACEMENT_3D('',#431368,#431369,#431370); +#431368 = CARTESIAN_POINT('',(146.99285746611,-153.2048197493,1.585)); +#431369 = DIRECTION('',(0.,0.,-1.)); +#431370 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#431371 = ORIENTED_EDGE('',*,*,#431372,.T.); +#431372 = EDGE_CURVE('',#431364,#431373,#431375,.T.); +#431373 = VERTEX_POINT('',#431374); +#431374 = CARTESIAN_POINT('',(147.340822,-153.13126,1.585)); +#431375 = LINE('',#431376,#431377); +#431376 = CARTESIAN_POINT('',(146.992857,-153.129819,1.585)); +#431377 = VECTOR('',#431378,1.); +#431378 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#431379 = ORIENTED_EDGE('',*,*,#431380,.T.); +#431380 = EDGE_CURVE('',#431373,#431381,#431383,.T.); +#431381 = VERTEX_POINT('',#431382); +#431382 = CARTESIAN_POINT('',(147.590225,-153.380663,1.585)); +#431383 = CIRCLE('',#431384,0.347870264855); +#431384 = AXIS2_PLACEMENT_3D('',#431385,#431386,#431387); +#431385 = CARTESIAN_POINT('',(147.25349426502,-153.4679907349,1.585)); +#431386 = DIRECTION('',(0.,0.,-1.)); +#431387 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#431388 = ORIENTED_EDGE('',*,*,#431389,.T.); +#431389 = EDGE_CURVE('',#431381,#431390,#431392,.T.); +#431390 = VERTEX_POINT('',#431391); +#431391 = CARTESIAN_POINT('',(147.589003,-153.510343,1.585)); +#431392 = LINE('',#431393,#431394); +#431393 = CARTESIAN_POINT('',(147.590225,-153.380663,1.585)); +#431394 = VECTOR('',#431395,1.); +#431395 = DIRECTION('',(-9.422777212324E-03,-0.999955604649,0.)); +#431396 = ORIENTED_EDGE('',*,*,#431397,.T.); +#431397 = EDGE_CURVE('',#431390,#431398,#431400,.T.); +#431398 = VERTEX_POINT('',#431399); +#431399 = CARTESIAN_POINT('',(147.526798,-153.633054,1.585)); +#431400 = LINE('',#431401,#431402); +#431401 = CARTESIAN_POINT('',(147.589003,-153.510343,1.585)); +#431402 = VECTOR('',#431403,1.); +#431403 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#431404 = ORIENTED_EDGE('',*,*,#431405,.T.); +#431405 = EDGE_CURVE('',#431398,#431406,#431408,.T.); +#431406 = VERTEX_POINT('',#431407); +#431407 = CARTESIAN_POINT('',(147.500121,-153.660762,1.585)); +#431408 = LINE('',#431409,#431410); +#431409 = CARTESIAN_POINT('',(147.526798,-153.633054,1.585)); +#431410 = VECTOR('',#431411,1.); +#431411 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#431412 = ORIENTED_EDGE('',*,*,#431413,.T.); +#431413 = EDGE_CURVE('',#431406,#431414,#431416,.T.); +#431414 = VERTEX_POINT('',#431415); +#431415 = CARTESIAN_POINT('',(147.52208,-153.675595,1.585)); +#431416 = LINE('',#431417,#431418); +#431417 = CARTESIAN_POINT('',(147.500121,-153.660762,1.585)); +#431418 = VECTOR('',#431419,1.); +#431419 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#431420 = ORIENTED_EDGE('',*,*,#431421,.T.); +#431421 = EDGE_CURVE('',#431414,#431422,#431424,.T.); +#431422 = VERTEX_POINT('',#431423); +#431423 = CARTESIAN_POINT('',(147.583748,-153.742706,1.585)); +#431424 = LINE('',#431425,#431426); +#431425 = CARTESIAN_POINT('',(147.52208,-153.675595,1.585)); +#431426 = VECTOR('',#431427,1.); +#431427 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#431428 = ORIENTED_EDGE('',*,*,#431429,.T.); +#431429 = EDGE_CURVE('',#431422,#431430,#431432,.T.); +#431430 = VERTEX_POINT('',#431431); +#431431 = CARTESIAN_POINT('',(147.574417,-154.156863,1.585)); +#431432 = CIRCLE('',#431433,0.341850333486); +#431433 = AXIS2_PLACEMENT_3D('',#431434,#431435,#431436); +#431434 = CARTESIAN_POINT('',(147.30719859864,-153.9436589276,1.585)); +#431435 = DIRECTION('',(0.,0.,-1.)); +#431436 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#431437 = ORIENTED_EDGE('',*,*,#431438,.T.); +#431438 = EDGE_CURVE('',#431430,#431439,#431441,.T.); +#431439 = VERTEX_POINT('',#431440); +#431440 = CARTESIAN_POINT('',(147.508887,-154.220317,1.585)); +#431441 = LINE('',#431442,#431443); +#431442 = CARTESIAN_POINT('',(147.574417,-154.156863,1.585)); +#431443 = VECTOR('',#431444,1.); +#431444 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#431445 = ORIENTED_EDGE('',*,*,#431446,.T.); +#431446 = EDGE_CURVE('',#431439,#431447,#431449,.T.); +#431447 = VERTEX_POINT('',#431448); +#431448 = CARTESIAN_POINT('',(146.951189,-154.267179,1.585)); +#431449 = CIRCLE('',#431450,0.612118292739); +#431450 = AXIS2_PLACEMENT_3D('',#431451,#431452,#431453); +#431451 = CARTESIAN_POINT('',(147.18445314383,-153.7012491072,1.585)); +#431452 = DIRECTION('',(-0.,0.,-1.)); +#431453 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#431454 = ORIENTED_EDGE('',*,*,#431455,.T.); +#431455 = EDGE_CURVE('',#431447,#431456,#431458,.T.); +#431456 = VERTEX_POINT('',#431457); +#431457 = CARTESIAN_POINT('',(146.930497,-154.246487,1.585)); +#431458 = LINE('',#431459,#431460); +#431459 = CARTESIAN_POINT('',(146.951189,-154.267179,1.585)); +#431460 = VECTOR('',#431461,1.); +#431461 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#431462 = ORIENTED_EDGE('',*,*,#431463,.T.); +#431463 = EDGE_CURVE('',#431456,#431464,#431466,.T.); +#431464 = VERTEX_POINT('',#431465); +#431465 = CARTESIAN_POINT('',(146.917857,-154.204819,1.585)); +#431466 = LINE('',#431467,#431468); +#431467 = CARTESIAN_POINT('',(146.930497,-154.246487,1.585)); +#431468 = VECTOR('',#431469,1.); +#431469 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#431470 = ORIENTED_EDGE('',*,*,#431471,.T.); +#431471 = EDGE_CURVE('',#431464,#431362,#431472,.T.); +#431472 = LINE('',#431473,#431474); +#431473 = CARTESIAN_POINT('',(146.917857,-154.204819,1.585)); +#431474 = VECTOR('',#431475,1.); +#431475 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#431476 = FACE_BOUND('',#431477,.F.); +#431477 = EDGE_LOOP('',(#431478,#431488,#431496,#431504,#431512,#431521, + #431529,#431537)); +#431478 = ORIENTED_EDGE('',*,*,#431479,.T.); +#431479 = EDGE_CURVE('',#431480,#431482,#431484,.T.); +#431480 = VERTEX_POINT('',#431481); +#431481 = CARTESIAN_POINT('',(147.428533,-153.79418,1.585)); +#431482 = VERTEX_POINT('',#431483); +#431483 = CARTESIAN_POINT('',(147.31402,-153.756009,1.585)); +#431484 = LINE('',#431485,#431486); +#431485 = CARTESIAN_POINT('',(147.428533,-153.79418,1.585)); +#431486 = VECTOR('',#431487,1.); +#431487 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#431488 = ORIENTED_EDGE('',*,*,#431489,.T.); +#431489 = EDGE_CURVE('',#431482,#431490,#431492,.T.); +#431490 = VERTEX_POINT('',#431491); +#431491 = CARTESIAN_POINT('',(147.067857,-153.756009,1.585)); +#431492 = LINE('',#431493,#431494); +#431493 = CARTESIAN_POINT('',(147.31402,-153.756009,1.585)); +#431494 = VECTOR('',#431495,1.); +#431495 = DIRECTION('',(-1.,0.,0.)); +#431496 = ORIENTED_EDGE('',*,*,#431497,.T.); +#431497 = EDGE_CURVE('',#431490,#431498,#431500,.T.); +#431498 = VERTEX_POINT('',#431499); +#431499 = CARTESIAN_POINT('',(147.067857,-154.129819,1.585)); +#431500 = LINE('',#431501,#431502); +#431501 = CARTESIAN_POINT('',(147.067857,-153.756009,1.585)); +#431502 = VECTOR('',#431503,1.); +#431503 = DIRECTION('',(0.,-1.,0.)); +#431504 = ORIENTED_EDGE('',*,*,#431505,.T.); +#431505 = EDGE_CURVE('',#431498,#431506,#431508,.T.); +#431506 = VERTEX_POINT('',#431507); +#431507 = CARTESIAN_POINT('',(147.356104,-154.129819,1.585)); +#431508 = LINE('',#431509,#431510); +#431509 = CARTESIAN_POINT('',(147.067857,-154.129819,1.585)); +#431510 = VECTOR('',#431511,1.); +#431511 = DIRECTION('',(1.,0.,0.)); +#431512 = ORIENTED_EDGE('',*,*,#431513,.T.); +#431513 = EDGE_CURVE('',#431506,#431514,#431516,.T.); +#431514 = VERTEX_POINT('',#431515); +#431515 = CARTESIAN_POINT('',(147.489285,-153.996637,1.585)); +#431516 = CIRCLE('',#431517,0.186867760544); +#431517 = AXIS2_PLACEMENT_3D('',#431518,#431519,#431520); +#431518 = CARTESIAN_POINT('',(147.30856496928,-153.9490993262,1.585)); +#431519 = DIRECTION('',(0.,0.,1.)); +#431520 = DIRECTION('',(0.254399317355,-0.967099264465,0.)); +#431521 = ORIENTED_EDGE('',*,*,#431522,.T.); +#431522 = EDGE_CURVE('',#431514,#431523,#431525,.T.); +#431523 = VERTEX_POINT('',#431524); +#431524 = CARTESIAN_POINT('',(147.489285,-153.88919,1.585)); +#431525 = LINE('',#431526,#431527); +#431526 = CARTESIAN_POINT('',(147.489285,-153.996637,1.585)); +#431527 = VECTOR('',#431528,1.); +#431528 = DIRECTION('',(0.,1.,0.)); +#431529 = ORIENTED_EDGE('',*,*,#431530,.T.); +#431530 = EDGE_CURVE('',#431523,#431531,#431533,.T.); +#431531 = VERTEX_POINT('',#431532); +#431532 = CARTESIAN_POINT('',(147.455027,-153.820674,1.585)); +#431533 = LINE('',#431534,#431535); +#431534 = CARTESIAN_POINT('',(147.489285,-153.88919,1.585)); +#431535 = VECTOR('',#431536,1.); +#431536 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#431537 = ORIENTED_EDGE('',*,*,#431538,.T.); +#431538 = EDGE_CURVE('',#431531,#431480,#431539,.T.); +#431539 = LINE('',#431540,#431541); +#431540 = CARTESIAN_POINT('',(147.455027,-153.820674,1.585)); +#431541 = VECTOR('',#431542,1.); +#431542 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#431543 = FACE_BOUND('',#431544,.F.); +#431544 = EDGE_LOOP('',(#431545,#431556,#431564,#431572,#431580,#431589) + ); +#431545 = ORIENTED_EDGE('',*,*,#431546,.T.); +#431546 = EDGE_CURVE('',#431547,#431549,#431551,.T.); +#431547 = VERTEX_POINT('',#431548); +#431548 = CARTESIAN_POINT('',(147.441666,-153.413,1.585)); +#431549 = VERTEX_POINT('',#431550); +#431550 = CARTESIAN_POINT('',(147.308485,-153.279819,1.585)); +#431551 = CIRCLE('',#431552,0.18686440374); +#431552 = AXIS2_PLACEMENT_3D('',#431553,#431554,#431555); +#431553 = CARTESIAN_POINT('',(147.260949,-153.460536,1.585)); +#431554 = DIRECTION('',(0.,0.,1.)); +#431555 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#431556 = ORIENTED_EDGE('',*,*,#431557,.T.); +#431557 = EDGE_CURVE('',#431549,#431558,#431560,.T.); +#431558 = VERTEX_POINT('',#431559); +#431559 = CARTESIAN_POINT('',(147.067857,-153.279819,1.585)); +#431560 = LINE('',#431561,#431562); +#431561 = CARTESIAN_POINT('',(147.308485,-153.279819,1.585)); +#431562 = VECTOR('',#431563,1.); +#431563 = DIRECTION('',(-1.,0.,0.)); +#431564 = ORIENTED_EDGE('',*,*,#431565,.T.); +#431565 = EDGE_CURVE('',#431558,#431566,#431568,.T.); +#431566 = VERTEX_POINT('',#431567); +#431567 = CARTESIAN_POINT('',(147.067857,-153.606009,1.585)); +#431568 = LINE('',#431569,#431570); +#431569 = CARTESIAN_POINT('',(147.067857,-153.279819,1.585)); +#431570 = VECTOR('',#431571,1.); +#431571 = DIRECTION('',(0.,-1.,0.)); +#431572 = ORIENTED_EDGE('',*,*,#431573,.T.); +#431573 = EDGE_CURVE('',#431566,#431574,#431576,.T.); +#431574 = VERTEX_POINT('',#431575); +#431575 = CARTESIAN_POINT('',(147.308485,-153.606009,1.585)); +#431576 = LINE('',#431577,#431578); +#431577 = CARTESIAN_POINT('',(147.067857,-153.606009,1.585)); +#431578 = VECTOR('',#431579,1.); +#431579 = DIRECTION('',(1.,0.,0.)); +#431580 = ORIENTED_EDGE('',*,*,#431581,.T.); +#431581 = EDGE_CURVE('',#431574,#431582,#431584,.T.); +#431582 = VERTEX_POINT('',#431583); +#431583 = CARTESIAN_POINT('',(147.441666,-153.472828,1.585)); +#431584 = CIRCLE('',#431585,0.18686440374); +#431585 = AXIS2_PLACEMENT_3D('',#431586,#431587,#431588); +#431586 = CARTESIAN_POINT('',(147.260949,-153.425292,1.585)); +#431587 = DIRECTION('',(0.,0.,1.)); +#431588 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#431589 = ORIENTED_EDGE('',*,*,#431590,.T.); +#431590 = EDGE_CURVE('',#431582,#431547,#431591,.T.); +#431591 = LINE('',#431592,#431593); +#431592 = CARTESIAN_POINT('',(147.441666,-153.472828,1.585)); +#431593 = VECTOR('',#431594,1.); +#431594 = DIRECTION('',(0.,1.,0.)); +#431595 = PLANE('',#431596); +#431596 = AXIS2_PLACEMENT_3D('',#431597,#431598,#431599); +#431597 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431598 = DIRECTION('',(0.,0.,1.)); +#431599 = DIRECTION('',(1.,0.,-0.)); +#431600 = SHELL_BASED_SURFACE_MODEL('',(#431601)); +#431601 = OPEN_SHELL('',(#431602)); +#431602 = ADVANCED_FACE('',(#431603),#431647,.T.); +#431603 = FACE_BOUND('',#431604,.F.); +#431604 = EDGE_LOOP('',(#431605,#431616,#431624,#431633,#431641)); +#431605 = ORIENTED_EDGE('',*,*,#431606,.T.); +#431606 = EDGE_CURVE('',#431607,#431609,#431611,.T.); +#431607 = VERTEX_POINT('',#431608); +#431608 = CARTESIAN_POINT('',(126.084567,-153.869203,1.585)); +#431609 = VERTEX_POINT('',#431610); +#431610 = CARTESIAN_POINT('',(126.2,-153.892164,1.585)); +#431611 = CIRCLE('',#431612,6.000007318647E-02); +#431612 = AXIS2_PLACEMENT_3D('',#431613,#431614,#431615); +#431613 = CARTESIAN_POINT('',(126.13999992681,-153.8921638233,1.585)); +#431614 = DIRECTION('',(0.,0.,-1.)); +#431615 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#431616 = ORIENTED_EDGE('',*,*,#431617,.T.); +#431617 = EDGE_CURVE('',#431609,#431618,#431620,.T.); +#431618 = VERTEX_POINT('',#431619); +#431619 = CARTESIAN_POINT('',(126.2,-154.107836,1.585)); +#431620 = LINE('',#431621,#431622); +#431621 = CARTESIAN_POINT('',(126.2,-153.892164,1.585)); +#431622 = VECTOR('',#431623,1.); +#431623 = DIRECTION('',(0.,-1.,0.)); +#431624 = ORIENTED_EDGE('',*,*,#431625,.T.); +#431625 = EDGE_CURVE('',#431618,#431626,#431628,.T.); +#431626 = VERTEX_POINT('',#431627); +#431627 = CARTESIAN_POINT('',(126.08,-154.107836,1.585)); +#431628 = CIRCLE('',#431629,6.000000000042E-02); +#431629 = AXIS2_PLACEMENT_3D('',#431630,#431631,#431632); +#431630 = CARTESIAN_POINT('',(126.14,-154.1078362255,1.585)); +#431631 = DIRECTION('',(0.,0.,-1.)); +#431632 = DIRECTION('',(0.999999999993,3.759794727378E-06,0.)); +#431633 = ORIENTED_EDGE('',*,*,#431634,.T.); +#431634 = EDGE_CURVE('',#431626,#431635,#431637,.T.); +#431635 = VERTEX_POINT('',#431636); +#431636 = CARTESIAN_POINT('',(126.08,-153.892164,1.585)); +#431637 = LINE('',#431638,#431639); +#431638 = CARTESIAN_POINT('',(126.08,-154.107836,1.585)); +#431639 = VECTOR('',#431640,1.); +#431640 = DIRECTION('',(0.,1.,0.)); +#431641 = ORIENTED_EDGE('',*,*,#431642,.T.); +#431642 = EDGE_CURVE('',#431635,#431607,#431643,.T.); +#431643 = LINE('',#431644,#431645); +#431644 = CARTESIAN_POINT('',(126.08,-153.892164,1.585)); +#431645 = VECTOR('',#431646,1.); +#431646 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431647 = PLANE('',#431648); +#431648 = AXIS2_PLACEMENT_3D('',#431649,#431650,#431651); +#431649 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431650 = DIRECTION('',(0.,0.,1.)); +#431651 = DIRECTION('',(1.,0.,-0.)); +#431652 = SHELL_BASED_SURFACE_MODEL('',(#431653)); +#431653 = OPEN_SHELL('',(#431654)); +#431654 = ADVANCED_FACE('',(#431655),#431699,.T.); +#431655 = FACE_BOUND('',#431656,.F.); +#431656 = EDGE_LOOP('',(#431657,#431668,#431676,#431685,#431693)); +#431657 = ORIENTED_EDGE('',*,*,#431658,.T.); +#431658 = EDGE_CURVE('',#431659,#431661,#431663,.T.); +#431659 = VERTEX_POINT('',#431660); +#431660 = CARTESIAN_POINT('',(126.804567,-153.869203,1.585)); +#431661 = VERTEX_POINT('',#431662); +#431662 = CARTESIAN_POINT('',(126.92,-153.892164,1.585)); +#431663 = CIRCLE('',#431664,6.000007318647E-02); +#431664 = AXIS2_PLACEMENT_3D('',#431665,#431666,#431667); +#431665 = CARTESIAN_POINT('',(126.85999992681,-153.8921638233,1.585)); +#431666 = DIRECTION('',(0.,0.,-1.)); +#431667 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#431668 = ORIENTED_EDGE('',*,*,#431669,.T.); +#431669 = EDGE_CURVE('',#431661,#431670,#431672,.T.); +#431670 = VERTEX_POINT('',#431671); +#431671 = CARTESIAN_POINT('',(126.92,-154.107836,1.585)); +#431672 = LINE('',#431673,#431674); +#431673 = CARTESIAN_POINT('',(126.92,-153.892164,1.585)); +#431674 = VECTOR('',#431675,1.); +#431675 = DIRECTION('',(0.,-1.,0.)); +#431676 = ORIENTED_EDGE('',*,*,#431677,.T.); +#431677 = EDGE_CURVE('',#431670,#431678,#431680,.T.); +#431678 = VERTEX_POINT('',#431679); +#431679 = CARTESIAN_POINT('',(126.8,-154.107836,1.585)); +#431680 = CIRCLE('',#431681,6.000000000042E-02); +#431681 = AXIS2_PLACEMENT_3D('',#431682,#431683,#431684); +#431682 = CARTESIAN_POINT('',(126.86,-154.1078362255,1.585)); +#431683 = DIRECTION('',(0.,0.,-1.)); +#431684 = DIRECTION('',(0.999999999993,3.759794727378E-06,0.)); +#431685 = ORIENTED_EDGE('',*,*,#431686,.T.); +#431686 = EDGE_CURVE('',#431678,#431687,#431689,.T.); +#431687 = VERTEX_POINT('',#431688); +#431688 = CARTESIAN_POINT('',(126.8,-153.892164,1.585)); +#431689 = LINE('',#431690,#431691); +#431690 = CARTESIAN_POINT('',(126.8,-154.107836,1.585)); +#431691 = VECTOR('',#431692,1.); +#431692 = DIRECTION('',(0.,1.,0.)); +#431693 = ORIENTED_EDGE('',*,*,#431694,.T.); +#431694 = EDGE_CURVE('',#431687,#431659,#431695,.T.); +#431695 = LINE('',#431696,#431697); +#431696 = CARTESIAN_POINT('',(126.8,-153.892164,1.585)); +#431697 = VECTOR('',#431698,1.); +#431698 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431699 = PLANE('',#431700); +#431700 = AXIS2_PLACEMENT_3D('',#431701,#431702,#431703); +#431701 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431702 = DIRECTION('',(0.,0.,1.)); +#431703 = DIRECTION('',(1.,0.,-0.)); +#431704 = SHELL_BASED_SURFACE_MODEL('',(#431705)); +#431705 = OPEN_SHELL('',(#431706)); +#431706 = ADVANCED_FACE('',(#431707),#431751,.T.); +#431707 = FACE_BOUND('',#431708,.F.); +#431708 = EDGE_LOOP('',(#431709,#431720,#431728,#431737,#431745)); +#431709 = ORIENTED_EDGE('',*,*,#431710,.T.); +#431710 = EDGE_CURVE('',#431711,#431713,#431715,.T.); +#431711 = VERTEX_POINT('',#431712); +#431712 = CARTESIAN_POINT('',(127.314567,-153.583398,1.585)); +#431713 = VERTEX_POINT('',#431714); +#431714 = CARTESIAN_POINT('',(127.43,-153.606359,1.585)); +#431715 = CIRCLE('',#431716,6.000007318649E-02); +#431716 = AXIS2_PLACEMENT_3D('',#431717,#431718,#431719); +#431717 = CARTESIAN_POINT('',(127.36999992681,-153.6063588233,1.585)); +#431718 = DIRECTION('',(0.,0.,-1.)); +#431719 = DIRECTION('',(-0.923880986636,0.382679921778,0.)); +#431720 = ORIENTED_EDGE('',*,*,#431721,.T.); +#431721 = EDGE_CURVE('',#431713,#431722,#431724,.T.); +#431722 = VERTEX_POINT('',#431723); +#431723 = CARTESIAN_POINT('',(127.43,-153.913641,1.585)); +#431724 = LINE('',#431725,#431726); +#431725 = CARTESIAN_POINT('',(127.43,-153.606359,1.585)); +#431726 = VECTOR('',#431727,1.); +#431727 = DIRECTION('',(0.,-1.,0.)); +#431728 = ORIENTED_EDGE('',*,*,#431729,.T.); +#431729 = EDGE_CURVE('',#431722,#431730,#431732,.T.); +#431730 = VERTEX_POINT('',#431731); +#431731 = CARTESIAN_POINT('',(127.31,-153.913641,1.585)); +#431732 = CIRCLE('',#431733,6.000000000043E-02); +#431733 = AXIS2_PLACEMENT_3D('',#431734,#431735,#431736); +#431734 = CARTESIAN_POINT('',(127.37,-153.9136412255,1.585)); +#431735 = DIRECTION('',(0.,0.,-1.)); +#431736 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#431737 = ORIENTED_EDGE('',*,*,#431738,.T.); +#431738 = EDGE_CURVE('',#431730,#431739,#431741,.T.); +#431739 = VERTEX_POINT('',#431740); +#431740 = CARTESIAN_POINT('',(127.31,-153.606359,1.585)); +#431741 = LINE('',#431742,#431743); +#431742 = CARTESIAN_POINT('',(127.31,-153.913641,1.585)); +#431743 = VECTOR('',#431744,1.); +#431744 = DIRECTION('',(0.,1.,0.)); +#431745 = ORIENTED_EDGE('',*,*,#431746,.T.); +#431746 = EDGE_CURVE('',#431739,#431711,#431747,.T.); +#431747 = LINE('',#431748,#431749); +#431748 = CARTESIAN_POINT('',(127.31,-153.606359,1.585)); +#431749 = VECTOR('',#431750,1.); +#431750 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431751 = PLANE('',#431752); +#431752 = AXIS2_PLACEMENT_3D('',#431753,#431754,#431755); +#431753 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431754 = DIRECTION('',(0.,0.,1.)); +#431755 = DIRECTION('',(1.,0.,-0.)); +#431756 = SHELL_BASED_SURFACE_MODEL('',(#431757)); +#431757 = OPEN_SHELL('',(#431758)); +#431758 = ADVANCED_FACE('',(#431759),#431803,.T.); +#431759 = FACE_BOUND('',#431760,.F.); +#431760 = EDGE_LOOP('',(#431761,#431772,#431780,#431789,#431797)); +#431761 = ORIENTED_EDGE('',*,*,#431762,.T.); +#431762 = EDGE_CURVE('',#431763,#431765,#431767,.T.); +#431763 = VERTEX_POINT('',#431764); +#431764 = CARTESIAN_POINT('',(128.074567,-153.583398,1.585)); +#431765 = VERTEX_POINT('',#431766); +#431766 = CARTESIAN_POINT('',(128.19,-153.606359,1.585)); +#431767 = CIRCLE('',#431768,6.000007318647E-02); +#431768 = AXIS2_PLACEMENT_3D('',#431769,#431770,#431771); +#431769 = CARTESIAN_POINT('',(128.12999992681,-153.6063588233,1.585)); +#431770 = DIRECTION('',(0.,0.,-1.)); +#431771 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#431772 = ORIENTED_EDGE('',*,*,#431773,.T.); +#431773 = EDGE_CURVE('',#431765,#431774,#431776,.T.); +#431774 = VERTEX_POINT('',#431775); +#431775 = CARTESIAN_POINT('',(128.19,-153.913641,1.585)); +#431776 = LINE('',#431777,#431778); +#431777 = CARTESIAN_POINT('',(128.19,-153.606359,1.585)); +#431778 = VECTOR('',#431779,1.); +#431779 = DIRECTION('',(0.,-1.,0.)); +#431780 = ORIENTED_EDGE('',*,*,#431781,.T.); +#431781 = EDGE_CURVE('',#431774,#431782,#431784,.T.); +#431782 = VERTEX_POINT('',#431783); +#431783 = CARTESIAN_POINT('',(128.07,-153.913641,1.585)); +#431784 = CIRCLE('',#431785,6.000000000042E-02); +#431785 = AXIS2_PLACEMENT_3D('',#431786,#431787,#431788); +#431786 = CARTESIAN_POINT('',(128.13,-153.9136412255,1.585)); +#431787 = DIRECTION('',(0.,0.,-1.)); +#431788 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#431789 = ORIENTED_EDGE('',*,*,#431790,.T.); +#431790 = EDGE_CURVE('',#431782,#431791,#431793,.T.); +#431791 = VERTEX_POINT('',#431792); +#431792 = CARTESIAN_POINT('',(128.07,-153.606359,1.585)); +#431793 = LINE('',#431794,#431795); +#431794 = CARTESIAN_POINT('',(128.07,-153.913641,1.585)); +#431795 = VECTOR('',#431796,1.); +#431796 = DIRECTION('',(0.,1.,0.)); +#431797 = ORIENTED_EDGE('',*,*,#431798,.T.); +#431798 = EDGE_CURVE('',#431791,#431763,#431799,.T.); +#431799 = LINE('',#431800,#431801); +#431800 = CARTESIAN_POINT('',(128.07,-153.606359,1.585)); +#431801 = VECTOR('',#431802,1.); +#431802 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431803 = PLANE('',#431804); +#431804 = AXIS2_PLACEMENT_3D('',#431805,#431806,#431807); +#431805 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431806 = DIRECTION('',(0.,0.,1.)); +#431807 = DIRECTION('',(1.,0.,-0.)); +#431808 = SHELL_BASED_SURFACE_MODEL('',(#431809)); +#431809 = OPEN_SHELL('',(#431810)); +#431810 = ADVANCED_FACE('',(#431811),#431855,.T.); +#431811 = FACE_BOUND('',#431812,.F.); +#431812 = EDGE_LOOP('',(#431813,#431824,#431832,#431841,#431849)); +#431813 = ORIENTED_EDGE('',*,*,#431814,.T.); +#431814 = EDGE_CURVE('',#431815,#431817,#431819,.T.); +#431815 = VERTEX_POINT('',#431816); +#431816 = CARTESIAN_POINT('',(128.564567,-153.583398,1.585)); +#431817 = VERTEX_POINT('',#431818); +#431818 = CARTESIAN_POINT('',(128.68,-153.606359,1.585)); +#431819 = CIRCLE('',#431820,6.000007318647E-02); +#431820 = AXIS2_PLACEMENT_3D('',#431821,#431822,#431823); +#431821 = CARTESIAN_POINT('',(128.61999992681,-153.6063588233,1.585)); +#431822 = DIRECTION('',(0.,0.,-1.)); +#431823 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#431824 = ORIENTED_EDGE('',*,*,#431825,.T.); +#431825 = EDGE_CURVE('',#431817,#431826,#431828,.T.); +#431826 = VERTEX_POINT('',#431827); +#431827 = CARTESIAN_POINT('',(128.68,-153.913641,1.585)); +#431828 = LINE('',#431829,#431830); +#431829 = CARTESIAN_POINT('',(128.68,-153.606359,1.585)); +#431830 = VECTOR('',#431831,1.); +#431831 = DIRECTION('',(0.,-1.,0.)); +#431832 = ORIENTED_EDGE('',*,*,#431833,.T.); +#431833 = EDGE_CURVE('',#431826,#431834,#431836,.T.); +#431834 = VERTEX_POINT('',#431835); +#431835 = CARTESIAN_POINT('',(128.56,-153.913641,1.585)); +#431836 = CIRCLE('',#431837,6.000000000042E-02); +#431837 = AXIS2_PLACEMENT_3D('',#431838,#431839,#431840); +#431838 = CARTESIAN_POINT('',(128.62,-153.9136412255,1.585)); +#431839 = DIRECTION('',(0.,0.,-1.)); +#431840 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#431841 = ORIENTED_EDGE('',*,*,#431842,.T.); +#431842 = EDGE_CURVE('',#431834,#431843,#431845,.T.); +#431843 = VERTEX_POINT('',#431844); +#431844 = CARTESIAN_POINT('',(128.56,-153.606359,1.585)); +#431845 = LINE('',#431846,#431847); +#431846 = CARTESIAN_POINT('',(128.56,-153.913641,1.585)); +#431847 = VECTOR('',#431848,1.); +#431848 = DIRECTION('',(0.,1.,0.)); +#431849 = ORIENTED_EDGE('',*,*,#431850,.T.); +#431850 = EDGE_CURVE('',#431843,#431815,#431851,.T.); +#431851 = LINE('',#431852,#431853); +#431852 = CARTESIAN_POINT('',(128.56,-153.606359,1.585)); +#431853 = VECTOR('',#431854,1.); +#431854 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431855 = PLANE('',#431856); +#431856 = AXIS2_PLACEMENT_3D('',#431857,#431858,#431859); +#431857 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431858 = DIRECTION('',(0.,0.,1.)); +#431859 = DIRECTION('',(1.,0.,-0.)); +#431860 = SHELL_BASED_SURFACE_MODEL('',(#431861)); +#431861 = OPEN_SHELL('',(#431862)); +#431862 = ADVANCED_FACE('',(#431863),#431907,.T.); +#431863 = FACE_BOUND('',#431864,.F.); +#431864 = EDGE_LOOP('',(#431865,#431876,#431884,#431893,#431901)); +#431865 = ORIENTED_EDGE('',*,*,#431866,.T.); +#431866 = EDGE_CURVE('',#431867,#431869,#431871,.T.); +#431867 = VERTEX_POINT('',#431868); +#431868 = CARTESIAN_POINT('',(129.324567,-153.583398,1.585)); +#431869 = VERTEX_POINT('',#431870); +#431870 = CARTESIAN_POINT('',(129.44,-153.606359,1.585)); +#431871 = CIRCLE('',#431872,6.000007318647E-02); +#431872 = AXIS2_PLACEMENT_3D('',#431873,#431874,#431875); +#431873 = CARTESIAN_POINT('',(129.37999992681,-153.6063588233,1.585)); +#431874 = DIRECTION('',(0.,0.,-1.)); +#431875 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#431876 = ORIENTED_EDGE('',*,*,#431877,.T.); +#431877 = EDGE_CURVE('',#431869,#431878,#431880,.T.); +#431878 = VERTEX_POINT('',#431879); +#431879 = CARTESIAN_POINT('',(129.44,-153.913641,1.585)); +#431880 = LINE('',#431881,#431882); +#431881 = CARTESIAN_POINT('',(129.44,-153.606359,1.585)); +#431882 = VECTOR('',#431883,1.); +#431883 = DIRECTION('',(0.,-1.,0.)); +#431884 = ORIENTED_EDGE('',*,*,#431885,.T.); +#431885 = EDGE_CURVE('',#431878,#431886,#431888,.T.); +#431886 = VERTEX_POINT('',#431887); +#431887 = CARTESIAN_POINT('',(129.32,-153.913641,1.585)); +#431888 = CIRCLE('',#431889,6.000000000042E-02); +#431889 = AXIS2_PLACEMENT_3D('',#431890,#431891,#431892); +#431890 = CARTESIAN_POINT('',(129.38,-153.9136412255,1.585)); +#431891 = DIRECTION('',(0.,0.,-1.)); +#431892 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#431893 = ORIENTED_EDGE('',*,*,#431894,.T.); +#431894 = EDGE_CURVE('',#431886,#431895,#431897,.T.); +#431895 = VERTEX_POINT('',#431896); +#431896 = CARTESIAN_POINT('',(129.32,-153.606359,1.585)); +#431897 = LINE('',#431898,#431899); +#431898 = CARTESIAN_POINT('',(129.32,-153.913641,1.585)); +#431899 = VECTOR('',#431900,1.); +#431900 = DIRECTION('',(0.,1.,0.)); +#431901 = ORIENTED_EDGE('',*,*,#431902,.T.); +#431902 = EDGE_CURVE('',#431895,#431867,#431903,.T.); +#431903 = LINE('',#431904,#431905); +#431904 = CARTESIAN_POINT('',(129.32,-153.606359,1.585)); +#431905 = VECTOR('',#431906,1.); +#431906 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431907 = PLANE('',#431908); +#431908 = AXIS2_PLACEMENT_3D('',#431909,#431910,#431911); +#431909 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431910 = DIRECTION('',(0.,0.,1.)); +#431911 = DIRECTION('',(1.,0.,-0.)); +#431912 = SHELL_BASED_SURFACE_MODEL('',(#431913)); +#431913 = OPEN_SHELL('',(#431914)); +#431914 = ADVANCED_FACE('',(#431915),#431959,.T.); +#431915 = FACE_BOUND('',#431916,.F.); +#431916 = EDGE_LOOP('',(#431917,#431928,#431936,#431945,#431953)); +#431917 = ORIENTED_EDGE('',*,*,#431918,.T.); +#431918 = EDGE_CURVE('',#431919,#431921,#431923,.T.); +#431919 = VERTEX_POINT('',#431920); +#431920 = CARTESIAN_POINT('',(129.814567,-153.583398,1.585)); +#431921 = VERTEX_POINT('',#431922); +#431922 = CARTESIAN_POINT('',(129.93,-153.606359,1.585)); +#431923 = CIRCLE('',#431924,6.000007318647E-02); +#431924 = AXIS2_PLACEMENT_3D('',#431925,#431926,#431927); +#431925 = CARTESIAN_POINT('',(129.86999992681,-153.6063588233,1.585)); +#431926 = DIRECTION('',(0.,0.,-1.)); +#431927 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#431928 = ORIENTED_EDGE('',*,*,#431929,.T.); +#431929 = EDGE_CURVE('',#431921,#431930,#431932,.T.); +#431930 = VERTEX_POINT('',#431931); +#431931 = CARTESIAN_POINT('',(129.93,-153.913641,1.585)); +#431932 = LINE('',#431933,#431934); +#431933 = CARTESIAN_POINT('',(129.93,-153.606359,1.585)); +#431934 = VECTOR('',#431935,1.); +#431935 = DIRECTION('',(0.,-1.,0.)); +#431936 = ORIENTED_EDGE('',*,*,#431937,.T.); +#431937 = EDGE_CURVE('',#431930,#431938,#431940,.T.); +#431938 = VERTEX_POINT('',#431939); +#431939 = CARTESIAN_POINT('',(129.81,-153.913641,1.585)); +#431940 = CIRCLE('',#431941,6.000000000042E-02); +#431941 = AXIS2_PLACEMENT_3D('',#431942,#431943,#431944); +#431942 = CARTESIAN_POINT('',(129.87,-153.9136412255,1.585)); +#431943 = DIRECTION('',(0.,0.,-1.)); +#431944 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#431945 = ORIENTED_EDGE('',*,*,#431946,.T.); +#431946 = EDGE_CURVE('',#431938,#431947,#431949,.T.); +#431947 = VERTEX_POINT('',#431948); +#431948 = CARTESIAN_POINT('',(129.81,-153.606359,1.585)); +#431949 = LINE('',#431950,#431951); +#431950 = CARTESIAN_POINT('',(129.81,-153.913641,1.585)); +#431951 = VECTOR('',#431952,1.); +#431952 = DIRECTION('',(0.,1.,0.)); +#431953 = ORIENTED_EDGE('',*,*,#431954,.T.); +#431954 = EDGE_CURVE('',#431947,#431919,#431955,.T.); +#431955 = LINE('',#431956,#431957); +#431956 = CARTESIAN_POINT('',(129.81,-153.606359,1.585)); +#431957 = VECTOR('',#431958,1.); +#431958 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#431959 = PLANE('',#431960); +#431960 = AXIS2_PLACEMENT_3D('',#431961,#431962,#431963); +#431961 = CARTESIAN_POINT('',(0.,0.,1.585)); +#431962 = DIRECTION('',(0.,0.,1.)); +#431963 = DIRECTION('',(1.,0.,-0.)); +#431964 = SHELL_BASED_SURFACE_MODEL('',(#431965)); +#431965 = OPEN_SHELL('',(#431966)); +#431966 = ADVANCED_FACE('',(#431967),#432011,.T.); +#431967 = FACE_BOUND('',#431968,.F.); +#431968 = EDGE_LOOP('',(#431969,#431980,#431988,#431997,#432005)); +#431969 = ORIENTED_EDGE('',*,*,#431970,.T.); +#431970 = EDGE_CURVE('',#431971,#431973,#431975,.T.); +#431971 = VERTEX_POINT('',#431972); +#431972 = CARTESIAN_POINT('',(130.574567,-153.583398,1.585)); +#431973 = VERTEX_POINT('',#431974); +#431974 = CARTESIAN_POINT('',(130.69,-153.606359,1.585)); +#431975 = CIRCLE('',#431976,6.000007318647E-02); +#431976 = AXIS2_PLACEMENT_3D('',#431977,#431978,#431979); +#431977 = CARTESIAN_POINT('',(130.62999992681,-153.6063588233,1.585)); +#431978 = DIRECTION('',(0.,0.,-1.)); +#431979 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#431980 = ORIENTED_EDGE('',*,*,#431981,.T.); +#431981 = EDGE_CURVE('',#431973,#431982,#431984,.T.); +#431982 = VERTEX_POINT('',#431983); +#431983 = CARTESIAN_POINT('',(130.69,-153.913641,1.585)); +#431984 = LINE('',#431985,#431986); +#431985 = CARTESIAN_POINT('',(130.69,-153.606359,1.585)); +#431986 = VECTOR('',#431987,1.); +#431987 = DIRECTION('',(0.,-1.,0.)); +#431988 = ORIENTED_EDGE('',*,*,#431989,.T.); +#431989 = EDGE_CURVE('',#431982,#431990,#431992,.T.); +#431990 = VERTEX_POINT('',#431991); +#431991 = CARTESIAN_POINT('',(130.57,-153.913641,1.585)); +#431992 = CIRCLE('',#431993,6.000000000042E-02); +#431993 = AXIS2_PLACEMENT_3D('',#431994,#431995,#431996); +#431994 = CARTESIAN_POINT('',(130.63,-153.9136412255,1.585)); +#431995 = DIRECTION('',(0.,0.,-1.)); +#431996 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#431997 = ORIENTED_EDGE('',*,*,#431998,.T.); +#431998 = EDGE_CURVE('',#431990,#431999,#432001,.T.); +#431999 = VERTEX_POINT('',#432000); +#432000 = CARTESIAN_POINT('',(130.57,-153.606359,1.585)); +#432001 = LINE('',#432002,#432003); +#432002 = CARTESIAN_POINT('',(130.57,-153.913641,1.585)); +#432003 = VECTOR('',#432004,1.); +#432004 = DIRECTION('',(0.,1.,0.)); +#432005 = ORIENTED_EDGE('',*,*,#432006,.T.); +#432006 = EDGE_CURVE('',#431999,#431971,#432007,.T.); +#432007 = LINE('',#432008,#432009); +#432008 = CARTESIAN_POINT('',(130.57,-153.606359,1.585)); +#432009 = VECTOR('',#432010,1.); +#432010 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432011 = PLANE('',#432012); +#432012 = AXIS2_PLACEMENT_3D('',#432013,#432014,#432015); +#432013 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432014 = DIRECTION('',(0.,0.,1.)); +#432015 = DIRECTION('',(1.,0.,-0.)); +#432016 = SHELL_BASED_SURFACE_MODEL('',(#432017)); +#432017 = OPEN_SHELL('',(#432018)); +#432018 = ADVANCED_FACE('',(#432019),#432055,.T.); +#432019 = FACE_BOUND('',#432020,.F.); +#432020 = EDGE_LOOP('',(#432021,#432032,#432040,#432049)); +#432021 = ORIENTED_EDGE('',*,*,#432022,.T.); +#432022 = EDGE_CURVE('',#432023,#432025,#432027,.T.); +#432023 = VERTEX_POINT('',#432024); +#432024 = CARTESIAN_POINT('',(144.096359,-153.19,1.585)); +#432025 = VERTEX_POINT('',#432026); +#432026 = CARTESIAN_POINT('',(144.096359,-153.07,1.585)); +#432027 = CIRCLE('',#432028,6.000000000042E-02); +#432028 = AXIS2_PLACEMENT_3D('',#432029,#432030,#432031); +#432029 = CARTESIAN_POINT('',(144.09635877441,-153.13,1.585)); +#432030 = DIRECTION('',(0.,0.,-1.)); +#432031 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432032 = ORIENTED_EDGE('',*,*,#432033,.T.); +#432033 = EDGE_CURVE('',#432025,#432034,#432036,.T.); +#432034 = VERTEX_POINT('',#432035); +#432035 = CARTESIAN_POINT('',(144.403641,-153.07,1.585)); +#432036 = LINE('',#432037,#432038); +#432037 = CARTESIAN_POINT('',(144.096359,-153.07,1.585)); +#432038 = VECTOR('',#432039,1.); +#432039 = DIRECTION('',(1.,0.,0.)); +#432040 = ORIENTED_EDGE('',*,*,#432041,.T.); +#432041 = EDGE_CURVE('',#432034,#432042,#432044,.T.); +#432042 = VERTEX_POINT('',#432043); +#432043 = CARTESIAN_POINT('',(144.403641,-153.19,1.585)); +#432044 = CIRCLE('',#432045,6.000000000042E-02); +#432045 = AXIS2_PLACEMENT_3D('',#432046,#432047,#432048); +#432046 = CARTESIAN_POINT('',(144.40364122558,-153.13,1.585)); +#432047 = DIRECTION('',(0.,0.,-1.)); +#432048 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432049 = ORIENTED_EDGE('',*,*,#432050,.T.); +#432050 = EDGE_CURVE('',#432042,#432023,#432051,.T.); +#432051 = LINE('',#432052,#432053); +#432052 = CARTESIAN_POINT('',(144.403641,-153.19,1.585)); +#432053 = VECTOR('',#432054,1.); +#432054 = DIRECTION('',(-1.,0.,0.)); +#432055 = PLANE('',#432056); +#432056 = AXIS2_PLACEMENT_3D('',#432057,#432058,#432059); +#432057 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432058 = DIRECTION('',(0.,0.,1.)); +#432059 = DIRECTION('',(1.,0.,-0.)); +#432060 = SHELL_BASED_SURFACE_MODEL('',(#432061)); +#432061 = OPEN_SHELL('',(#432062)); +#432062 = ADVANCED_FACE('',(#432063),#432107,.T.); +#432063 = FACE_BOUND('',#432064,.F.); +#432064 = EDGE_LOOP('',(#432065,#432076,#432084,#432093,#432101)); +#432065 = ORIENTED_EDGE('',*,*,#432066,.T.); +#432066 = EDGE_CURVE('',#432067,#432069,#432071,.T.); +#432067 = VERTEX_POINT('',#432068); +#432068 = CARTESIAN_POINT('',(147.814567,-152.573398,1.585)); +#432069 = VERTEX_POINT('',#432070); +#432070 = CARTESIAN_POINT('',(147.93,-152.596359,1.585)); +#432071 = CIRCLE('',#432072,6.000007318647E-02); +#432072 = AXIS2_PLACEMENT_3D('',#432073,#432074,#432075); +#432073 = CARTESIAN_POINT('',(147.86999992681,-152.5963588233,1.585)); +#432074 = DIRECTION('',(0.,0.,-1.)); +#432075 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432076 = ORIENTED_EDGE('',*,*,#432077,.T.); +#432077 = EDGE_CURVE('',#432069,#432078,#432080,.T.); +#432078 = VERTEX_POINT('',#432079); +#432079 = CARTESIAN_POINT('',(147.93,-152.903641,1.585)); +#432080 = LINE('',#432081,#432082); +#432081 = CARTESIAN_POINT('',(147.93,-152.596359,1.585)); +#432082 = VECTOR('',#432083,1.); +#432083 = DIRECTION('',(0.,-1.,0.)); +#432084 = ORIENTED_EDGE('',*,*,#432085,.T.); +#432085 = EDGE_CURVE('',#432078,#432086,#432088,.T.); +#432086 = VERTEX_POINT('',#432087); +#432087 = CARTESIAN_POINT('',(147.81,-152.903641,1.585)); +#432088 = CIRCLE('',#432089,6.000000000042E-02); +#432089 = AXIS2_PLACEMENT_3D('',#432090,#432091,#432092); +#432090 = CARTESIAN_POINT('',(147.87,-152.9036412255,1.585)); +#432091 = DIRECTION('',(0.,0.,-1.)); +#432092 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432093 = ORIENTED_EDGE('',*,*,#432094,.T.); +#432094 = EDGE_CURVE('',#432086,#432095,#432097,.T.); +#432095 = VERTEX_POINT('',#432096); +#432096 = CARTESIAN_POINT('',(147.81,-152.596359,1.585)); +#432097 = LINE('',#432098,#432099); +#432098 = CARTESIAN_POINT('',(147.81,-152.903641,1.585)); +#432099 = VECTOR('',#432100,1.); +#432100 = DIRECTION('',(0.,1.,0.)); +#432101 = ORIENTED_EDGE('',*,*,#432102,.T.); +#432102 = EDGE_CURVE('',#432095,#432067,#432103,.T.); +#432103 = LINE('',#432104,#432105); +#432104 = CARTESIAN_POINT('',(147.81,-152.596359,1.585)); +#432105 = VECTOR('',#432106,1.); +#432106 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432107 = PLANE('',#432108); +#432108 = AXIS2_PLACEMENT_3D('',#432109,#432110,#432111); +#432109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432110 = DIRECTION('',(0.,0.,1.)); +#432111 = DIRECTION('',(1.,0.,-0.)); +#432112 = SHELL_BASED_SURFACE_MODEL('',(#432113)); +#432113 = OPEN_SHELL('',(#432114)); +#432114 = ADVANCED_FACE('',(#432115),#432159,.T.); +#432115 = FACE_BOUND('',#432116,.F.); +#432116 = EDGE_LOOP('',(#432117,#432128,#432136,#432145,#432153)); +#432117 = ORIENTED_EDGE('',*,*,#432118,.T.); +#432118 = EDGE_CURVE('',#432119,#432121,#432123,.T.); +#432119 = VERTEX_POINT('',#432120); +#432120 = CARTESIAN_POINT('',(148.574567,-152.573398,1.585)); +#432121 = VERTEX_POINT('',#432122); +#432122 = CARTESIAN_POINT('',(148.69,-152.596359,1.585)); +#432123 = CIRCLE('',#432124,6.000007318647E-02); +#432124 = AXIS2_PLACEMENT_3D('',#432125,#432126,#432127); +#432125 = CARTESIAN_POINT('',(148.62999992681,-152.5963588233,1.585)); +#432126 = DIRECTION('',(0.,0.,-1.)); +#432127 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432128 = ORIENTED_EDGE('',*,*,#432129,.T.); +#432129 = EDGE_CURVE('',#432121,#432130,#432132,.T.); +#432130 = VERTEX_POINT('',#432131); +#432131 = CARTESIAN_POINT('',(148.69,-152.903641,1.585)); +#432132 = LINE('',#432133,#432134); +#432133 = CARTESIAN_POINT('',(148.69,-152.596359,1.585)); +#432134 = VECTOR('',#432135,1.); +#432135 = DIRECTION('',(0.,-1.,0.)); +#432136 = ORIENTED_EDGE('',*,*,#432137,.T.); +#432137 = EDGE_CURVE('',#432130,#432138,#432140,.T.); +#432138 = VERTEX_POINT('',#432139); +#432139 = CARTESIAN_POINT('',(148.57,-152.903641,1.585)); +#432140 = CIRCLE('',#432141,6.000000000042E-02); +#432141 = AXIS2_PLACEMENT_3D('',#432142,#432143,#432144); +#432142 = CARTESIAN_POINT('',(148.63,-152.9036412255,1.585)); +#432143 = DIRECTION('',(0.,0.,-1.)); +#432144 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432145 = ORIENTED_EDGE('',*,*,#432146,.T.); +#432146 = EDGE_CURVE('',#432138,#432147,#432149,.T.); +#432147 = VERTEX_POINT('',#432148); +#432148 = CARTESIAN_POINT('',(148.57,-152.596359,1.585)); +#432149 = LINE('',#432150,#432151); +#432150 = CARTESIAN_POINT('',(148.57,-152.903641,1.585)); +#432151 = VECTOR('',#432152,1.); +#432152 = DIRECTION('',(0.,1.,0.)); +#432153 = ORIENTED_EDGE('',*,*,#432154,.T.); +#432154 = EDGE_CURVE('',#432147,#432119,#432155,.T.); +#432155 = LINE('',#432156,#432157); +#432156 = CARTESIAN_POINT('',(148.57,-152.596359,1.585)); +#432157 = VECTOR('',#432158,1.); +#432158 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432159 = PLANE('',#432160); +#432160 = AXIS2_PLACEMENT_3D('',#432161,#432162,#432163); +#432161 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432162 = DIRECTION('',(0.,0.,1.)); +#432163 = DIRECTION('',(1.,0.,-0.)); +#432164 = SHELL_BASED_SURFACE_MODEL('',(#432165)); +#432165 = OPEN_SHELL('',(#432166)); +#432166 = ADVANCED_FACE('',(#432167),#432211,.T.); +#432167 = FACE_BOUND('',#432168,.F.); +#432168 = EDGE_LOOP('',(#432169,#432180,#432188,#432197,#432205)); +#432169 = ORIENTED_EDGE('',*,*,#432170,.T.); +#432170 = EDGE_CURVE('',#432171,#432173,#432175,.T.); +#432171 = VERTEX_POINT('',#432172); +#432172 = CARTESIAN_POINT('',(150.084567,-152.619203,1.585)); +#432173 = VERTEX_POINT('',#432174); +#432174 = CARTESIAN_POINT('',(150.2,-152.642164,1.585)); +#432175 = CIRCLE('',#432176,6.000007318646E-02); +#432176 = AXIS2_PLACEMENT_3D('',#432177,#432178,#432179); +#432177 = CARTESIAN_POINT('',(150.13999992681,-152.6421638233,1.585)); +#432178 = DIRECTION('',(0.,0.,-1.)); +#432179 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#432180 = ORIENTED_EDGE('',*,*,#432181,.T.); +#432181 = EDGE_CURVE('',#432173,#432182,#432184,.T.); +#432182 = VERTEX_POINT('',#432183); +#432183 = CARTESIAN_POINT('',(150.2,-152.857836,1.585)); +#432184 = LINE('',#432185,#432186); +#432185 = CARTESIAN_POINT('',(150.2,-152.642164,1.585)); +#432186 = VECTOR('',#432187,1.); +#432187 = DIRECTION('',(0.,-1.,0.)); +#432188 = ORIENTED_EDGE('',*,*,#432189,.T.); +#432189 = EDGE_CURVE('',#432182,#432190,#432192,.T.); +#432190 = VERTEX_POINT('',#432191); +#432191 = CARTESIAN_POINT('',(150.08,-152.857836,1.585)); +#432192 = CIRCLE('',#432193,6.00000000004E-02); +#432193 = AXIS2_PLACEMENT_3D('',#432194,#432195,#432196); +#432194 = CARTESIAN_POINT('',(150.14,-152.8578362255,1.585)); +#432195 = DIRECTION('',(0.,0.,-1.)); +#432196 = DIRECTION('',(0.999999999993,3.759795201076E-06,0.)); +#432197 = ORIENTED_EDGE('',*,*,#432198,.T.); +#432198 = EDGE_CURVE('',#432190,#432199,#432201,.T.); +#432199 = VERTEX_POINT('',#432200); +#432200 = CARTESIAN_POINT('',(150.08,-152.642164,1.585)); +#432201 = LINE('',#432202,#432203); +#432202 = CARTESIAN_POINT('',(150.08,-152.857836,1.585)); +#432203 = VECTOR('',#432204,1.); +#432204 = DIRECTION('',(0.,1.,0.)); +#432205 = ORIENTED_EDGE('',*,*,#432206,.T.); +#432206 = EDGE_CURVE('',#432199,#432171,#432207,.T.); +#432207 = LINE('',#432208,#432209); +#432208 = CARTESIAN_POINT('',(150.08,-152.642164,1.585)); +#432209 = VECTOR('',#432210,1.); +#432210 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432211 = PLANE('',#432212); +#432212 = AXIS2_PLACEMENT_3D('',#432213,#432214,#432215); +#432213 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432214 = DIRECTION('',(0.,0.,1.)); +#432215 = DIRECTION('',(1.,0.,-0.)); +#432216 = SHELL_BASED_SURFACE_MODEL('',(#432217)); +#432217 = OPEN_SHELL('',(#432218)); +#432218 = ADVANCED_FACE('',(#432219),#432263,.T.); +#432219 = FACE_BOUND('',#432220,.F.); +#432220 = EDGE_LOOP('',(#432221,#432232,#432240,#432249,#432257)); +#432221 = ORIENTED_EDGE('',*,*,#432222,.T.); +#432222 = EDGE_CURVE('',#432223,#432225,#432227,.T.); +#432223 = VERTEX_POINT('',#432224); +#432224 = CARTESIAN_POINT('',(150.804567,-152.619203,1.585)); +#432225 = VERTEX_POINT('',#432226); +#432226 = CARTESIAN_POINT('',(150.92,-152.642164,1.585)); +#432227 = CIRCLE('',#432228,6.000007318646E-02); +#432228 = AXIS2_PLACEMENT_3D('',#432229,#432230,#432231); +#432229 = CARTESIAN_POINT('',(150.85999992681,-152.6421638233,1.585)); +#432230 = DIRECTION('',(0.,0.,-1.)); +#432231 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#432232 = ORIENTED_EDGE('',*,*,#432233,.T.); +#432233 = EDGE_CURVE('',#432225,#432234,#432236,.T.); +#432234 = VERTEX_POINT('',#432235); +#432235 = CARTESIAN_POINT('',(150.92,-152.857836,1.585)); +#432236 = LINE('',#432237,#432238); +#432237 = CARTESIAN_POINT('',(150.92,-152.642164,1.585)); +#432238 = VECTOR('',#432239,1.); +#432239 = DIRECTION('',(0.,-1.,0.)); +#432240 = ORIENTED_EDGE('',*,*,#432241,.T.); +#432241 = EDGE_CURVE('',#432234,#432242,#432244,.T.); +#432242 = VERTEX_POINT('',#432243); +#432243 = CARTESIAN_POINT('',(150.8,-152.857836,1.585)); +#432244 = CIRCLE('',#432245,6.000000000041E-02); +#432245 = AXIS2_PLACEMENT_3D('',#432246,#432247,#432248); +#432246 = CARTESIAN_POINT('',(150.86,-152.8578362255,1.585)); +#432247 = DIRECTION('',(0.,0.,-1.)); +#432248 = DIRECTION('',(0.999999999993,3.759794727379E-06,0.)); +#432249 = ORIENTED_EDGE('',*,*,#432250,.T.); +#432250 = EDGE_CURVE('',#432242,#432251,#432253,.T.); +#432251 = VERTEX_POINT('',#432252); +#432252 = CARTESIAN_POINT('',(150.8,-152.642164,1.585)); +#432253 = LINE('',#432254,#432255); +#432254 = CARTESIAN_POINT('',(150.8,-152.857836,1.585)); +#432255 = VECTOR('',#432256,1.); +#432256 = DIRECTION('',(0.,1.,0.)); +#432257 = ORIENTED_EDGE('',*,*,#432258,.T.); +#432258 = EDGE_CURVE('',#432251,#432223,#432259,.T.); +#432259 = LINE('',#432260,#432261); +#432260 = CARTESIAN_POINT('',(150.8,-152.642164,1.585)); +#432261 = VECTOR('',#432262,1.); +#432262 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432263 = PLANE('',#432264); +#432264 = AXIS2_PLACEMENT_3D('',#432265,#432266,#432267); +#432265 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432266 = DIRECTION('',(0.,0.,1.)); +#432267 = DIRECTION('',(1.,0.,-0.)); +#432268 = SHELL_BASED_SURFACE_MODEL('',(#432269)); +#432269 = OPEN_SHELL('',(#432270)); +#432270 = ADVANCED_FACE('',(#432271),#432307,.T.); +#432271 = FACE_BOUND('',#432272,.F.); +#432272 = EDGE_LOOP('',(#432273,#432284,#432292,#432301)); +#432273 = ORIENTED_EDGE('',*,*,#432274,.T.); +#432274 = EDGE_CURVE('',#432275,#432277,#432279,.T.); +#432275 = VERTEX_POINT('',#432276); +#432276 = CARTESIAN_POINT('',(144.096359,-152.43,1.585)); +#432277 = VERTEX_POINT('',#432278); +#432278 = CARTESIAN_POINT('',(144.096359,-152.31,1.585)); +#432279 = CIRCLE('',#432280,6.000000000042E-02); +#432280 = AXIS2_PLACEMENT_3D('',#432281,#432282,#432283); +#432281 = CARTESIAN_POINT('',(144.09635877441,-152.37,1.585)); +#432282 = DIRECTION('',(0.,0.,-1.)); +#432283 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432284 = ORIENTED_EDGE('',*,*,#432285,.T.); +#432285 = EDGE_CURVE('',#432277,#432286,#432288,.T.); +#432286 = VERTEX_POINT('',#432287); +#432287 = CARTESIAN_POINT('',(144.403641,-152.31,1.585)); +#432288 = LINE('',#432289,#432290); +#432289 = CARTESIAN_POINT('',(144.096359,-152.31,1.585)); +#432290 = VECTOR('',#432291,1.); +#432291 = DIRECTION('',(1.,0.,0.)); +#432292 = ORIENTED_EDGE('',*,*,#432293,.T.); +#432293 = EDGE_CURVE('',#432286,#432294,#432296,.T.); +#432294 = VERTEX_POINT('',#432295); +#432295 = CARTESIAN_POINT('',(144.403641,-152.43,1.585)); +#432296 = CIRCLE('',#432297,6.000000000042E-02); +#432297 = AXIS2_PLACEMENT_3D('',#432298,#432299,#432300); +#432298 = CARTESIAN_POINT('',(144.40364122558,-152.37,1.585)); +#432299 = DIRECTION('',(0.,0.,-1.)); +#432300 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432301 = ORIENTED_EDGE('',*,*,#432302,.T.); +#432302 = EDGE_CURVE('',#432294,#432275,#432303,.T.); +#432303 = LINE('',#432304,#432305); +#432304 = CARTESIAN_POINT('',(144.403641,-152.43,1.585)); +#432305 = VECTOR('',#432306,1.); +#432306 = DIRECTION('',(-1.,0.,0.)); +#432307 = PLANE('',#432308); +#432308 = AXIS2_PLACEMENT_3D('',#432309,#432310,#432311); +#432309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432310 = DIRECTION('',(0.,0.,1.)); +#432311 = DIRECTION('',(1.,0.,-0.)); +#432312 = SHELL_BASED_SURFACE_MODEL('',(#432313)); +#432313 = OPEN_SHELL('',(#432314)); +#432314 = ADVANCED_FACE('',(#432315),#432359,.T.); +#432315 = FACE_BOUND('',#432316,.F.); +#432316 = EDGE_LOOP('',(#432317,#432328,#432336,#432345,#432353)); +#432317 = ORIENTED_EDGE('',*,*,#432318,.T.); +#432318 = EDGE_CURVE('',#432319,#432321,#432323,.T.); +#432319 = VERTEX_POINT('',#432320); +#432320 = CARTESIAN_POINT('',(139.164567,-147.113398,1.585)); +#432321 = VERTEX_POINT('',#432322); +#432322 = CARTESIAN_POINT('',(139.28,-147.136359,1.585)); +#432323 = CIRCLE('',#432324,6.000007318647E-02); +#432324 = AXIS2_PLACEMENT_3D('',#432325,#432326,#432327); +#432325 = CARTESIAN_POINT('',(139.21999992681,-147.1363588233,1.585)); +#432326 = DIRECTION('',(0.,0.,-1.)); +#432327 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432328 = ORIENTED_EDGE('',*,*,#432329,.T.); +#432329 = EDGE_CURVE('',#432321,#432330,#432332,.T.); +#432330 = VERTEX_POINT('',#432331); +#432331 = CARTESIAN_POINT('',(139.28,-147.443641,1.585)); +#432332 = LINE('',#432333,#432334); +#432333 = CARTESIAN_POINT('',(139.28,-147.136359,1.585)); +#432334 = VECTOR('',#432335,1.); +#432335 = DIRECTION('',(0.,-1.,0.)); +#432336 = ORIENTED_EDGE('',*,*,#432337,.T.); +#432337 = EDGE_CURVE('',#432330,#432338,#432340,.T.); +#432338 = VERTEX_POINT('',#432339); +#432339 = CARTESIAN_POINT('',(139.16,-147.443641,1.585)); +#432340 = CIRCLE('',#432341,6.000000000042E-02); +#432341 = AXIS2_PLACEMENT_3D('',#432342,#432343,#432344); +#432342 = CARTESIAN_POINT('',(139.22,-147.4436412255,1.585)); +#432343 = DIRECTION('',(0.,0.,-1.)); +#432344 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432345 = ORIENTED_EDGE('',*,*,#432346,.T.); +#432346 = EDGE_CURVE('',#432338,#432347,#432349,.T.); +#432347 = VERTEX_POINT('',#432348); +#432348 = CARTESIAN_POINT('',(139.16,-147.136359,1.585)); +#432349 = LINE('',#432350,#432351); +#432350 = CARTESIAN_POINT('',(139.16,-147.443641,1.585)); +#432351 = VECTOR('',#432352,1.); +#432352 = DIRECTION('',(0.,1.,0.)); +#432353 = ORIENTED_EDGE('',*,*,#432354,.T.); +#432354 = EDGE_CURVE('',#432347,#432319,#432355,.T.); +#432355 = LINE('',#432356,#432357); +#432356 = CARTESIAN_POINT('',(139.16,-147.136359,1.585)); +#432357 = VECTOR('',#432358,1.); +#432358 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432359 = PLANE('',#432360); +#432360 = AXIS2_PLACEMENT_3D('',#432361,#432362,#432363); +#432361 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432362 = DIRECTION('',(0.,0.,1.)); +#432363 = DIRECTION('',(1.,0.,-0.)); +#432364 = SHELL_BASED_SURFACE_MODEL('',(#432365)); +#432365 = OPEN_SHELL('',(#432366)); +#432366 = ADVANCED_FACE('',(#432367),#432411,.T.); +#432367 = FACE_BOUND('',#432368,.F.); +#432368 = EDGE_LOOP('',(#432369,#432380,#432388,#432397,#432405)); +#432369 = ORIENTED_EDGE('',*,*,#432370,.T.); +#432370 = EDGE_CURVE('',#432371,#432373,#432375,.T.); +#432371 = VERTEX_POINT('',#432372); +#432372 = CARTESIAN_POINT('',(139.924567,-147.113398,1.585)); +#432373 = VERTEX_POINT('',#432374); +#432374 = CARTESIAN_POINT('',(140.04,-147.136359,1.585)); +#432375 = CIRCLE('',#432376,6.000007318647E-02); +#432376 = AXIS2_PLACEMENT_3D('',#432377,#432378,#432379); +#432377 = CARTESIAN_POINT('',(139.97999992681,-147.1363588233,1.585)); +#432378 = DIRECTION('',(0.,0.,-1.)); +#432379 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432380 = ORIENTED_EDGE('',*,*,#432381,.T.); +#432381 = EDGE_CURVE('',#432373,#432382,#432384,.T.); +#432382 = VERTEX_POINT('',#432383); +#432383 = CARTESIAN_POINT('',(140.04,-147.443641,1.585)); +#432384 = LINE('',#432385,#432386); +#432385 = CARTESIAN_POINT('',(140.04,-147.136359,1.585)); +#432386 = VECTOR('',#432387,1.); +#432387 = DIRECTION('',(0.,-1.,0.)); +#432388 = ORIENTED_EDGE('',*,*,#432389,.T.); +#432389 = EDGE_CURVE('',#432382,#432390,#432392,.T.); +#432390 = VERTEX_POINT('',#432391); +#432391 = CARTESIAN_POINT('',(139.92,-147.443641,1.585)); +#432392 = CIRCLE('',#432393,6.000000000042E-02); +#432393 = AXIS2_PLACEMENT_3D('',#432394,#432395,#432396); +#432394 = CARTESIAN_POINT('',(139.98,-147.4436412255,1.585)); +#432395 = DIRECTION('',(0.,0.,-1.)); +#432396 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432397 = ORIENTED_EDGE('',*,*,#432398,.T.); +#432398 = EDGE_CURVE('',#432390,#432399,#432401,.T.); +#432399 = VERTEX_POINT('',#432400); +#432400 = CARTESIAN_POINT('',(139.92,-147.136359,1.585)); +#432401 = LINE('',#432402,#432403); +#432402 = CARTESIAN_POINT('',(139.92,-147.443641,1.585)); +#432403 = VECTOR('',#432404,1.); +#432404 = DIRECTION('',(0.,1.,0.)); +#432405 = ORIENTED_EDGE('',*,*,#432406,.T.); +#432406 = EDGE_CURVE('',#432399,#432371,#432407,.T.); +#432407 = LINE('',#432408,#432409); +#432408 = CARTESIAN_POINT('',(139.92,-147.136359,1.585)); +#432409 = VECTOR('',#432410,1.); +#432410 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432411 = PLANE('',#432412); +#432412 = AXIS2_PLACEMENT_3D('',#432413,#432414,#432415); +#432413 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432414 = DIRECTION('',(0.,0.,1.)); +#432415 = DIRECTION('',(1.,0.,-0.)); +#432416 = SHELL_BASED_SURFACE_MODEL('',(#432417)); +#432417 = OPEN_SHELL('',(#432418)); +#432418 = ADVANCED_FACE('',(#432419),#432463,.T.); +#432419 = FACE_BOUND('',#432420,.F.); +#432420 = EDGE_LOOP('',(#432421,#432432,#432440,#432449,#432457)); +#432421 = ORIENTED_EDGE('',*,*,#432422,.T.); +#432422 = EDGE_CURVE('',#432423,#432425,#432427,.T.); +#432423 = VERTEX_POINT('',#432424); +#432424 = CARTESIAN_POINT('',(141.934567,-133.611459,1.585)); +#432425 = VERTEX_POINT('',#432426); +#432426 = CARTESIAN_POINT('',(142.05,-133.63442,1.585)); +#432427 = CIRCLE('',#432428,6.00000731865E-02); +#432428 = AXIS2_PLACEMENT_3D('',#432429,#432430,#432431); +#432429 = CARTESIAN_POINT('',(141.98999992681,-133.6344198233,1.585)); +#432430 = DIRECTION('',(0.,0.,-1.)); +#432431 = DIRECTION('',(-0.923880986636,0.382679921778,0.)); +#432432 = ORIENTED_EDGE('',*,*,#432433,.T.); +#432433 = EDGE_CURVE('',#432425,#432434,#432436,.T.); +#432434 = VERTEX_POINT('',#432435); +#432435 = CARTESIAN_POINT('',(142.05,-133.91558,1.585)); +#432436 = LINE('',#432437,#432438); +#432437 = CARTESIAN_POINT('',(142.05,-133.63442,1.585)); +#432438 = VECTOR('',#432439,1.); +#432439 = DIRECTION('',(0.,-1.,0.)); +#432440 = ORIENTED_EDGE('',*,*,#432441,.T.); +#432441 = EDGE_CURVE('',#432434,#432442,#432444,.T.); +#432442 = VERTEX_POINT('',#432443); +#432443 = CARTESIAN_POINT('',(141.93,-133.91558,1.585)); +#432444 = CIRCLE('',#432445,6.000000000043E-02); +#432445 = AXIS2_PLACEMENT_3D('',#432446,#432447,#432448); +#432446 = CARTESIAN_POINT('',(141.99,-133.9155802255,1.585)); +#432447 = DIRECTION('',(0.,0.,-1.)); +#432448 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#432449 = ORIENTED_EDGE('',*,*,#432450,.T.); +#432450 = EDGE_CURVE('',#432442,#432451,#432453,.T.); +#432451 = VERTEX_POINT('',#432452); +#432452 = CARTESIAN_POINT('',(141.93,-133.63442,1.585)); +#432453 = LINE('',#432454,#432455); +#432454 = CARTESIAN_POINT('',(141.93,-133.91558,1.585)); +#432455 = VECTOR('',#432456,1.); +#432456 = DIRECTION('',(0.,1.,0.)); +#432457 = ORIENTED_EDGE('',*,*,#432458,.T.); +#432458 = EDGE_CURVE('',#432451,#432423,#432459,.T.); +#432459 = LINE('',#432460,#432461); +#432460 = CARTESIAN_POINT('',(141.93,-133.63442,1.585)); +#432461 = VECTOR('',#432462,1.); +#432462 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432463 = PLANE('',#432464); +#432464 = AXIS2_PLACEMENT_3D('',#432465,#432466,#432467); +#432465 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432466 = DIRECTION('',(0.,0.,1.)); +#432467 = DIRECTION('',(1.,0.,-0.)); +#432468 = SHELL_BASED_SURFACE_MODEL('',(#432469)); +#432469 = OPEN_SHELL('',(#432470)); +#432470 = ADVANCED_FACE('',(#432471),#432515,.T.); +#432471 = FACE_BOUND('',#432472,.F.); +#432472 = EDGE_LOOP('',(#432473,#432484,#432492,#432501,#432509)); +#432473 = ORIENTED_EDGE('',*,*,#432474,.T.); +#432474 = EDGE_CURVE('',#432475,#432477,#432479,.T.); +#432475 = VERTEX_POINT('',#432476); +#432476 = CARTESIAN_POINT('',(142.954567,-133.611459,1.585)); +#432477 = VERTEX_POINT('',#432478); +#432478 = CARTESIAN_POINT('',(143.07,-133.63442,1.585)); +#432479 = CIRCLE('',#432480,6.000007318647E-02); +#432480 = AXIS2_PLACEMENT_3D('',#432481,#432482,#432483); +#432481 = CARTESIAN_POINT('',(143.00999992681,-133.6344198233,1.585)); +#432482 = DIRECTION('',(0.,0.,-1.)); +#432483 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432484 = ORIENTED_EDGE('',*,*,#432485,.T.); +#432485 = EDGE_CURVE('',#432477,#432486,#432488,.T.); +#432486 = VERTEX_POINT('',#432487); +#432487 = CARTESIAN_POINT('',(143.07,-133.91558,1.585)); +#432488 = LINE('',#432489,#432490); +#432489 = CARTESIAN_POINT('',(143.07,-133.63442,1.585)); +#432490 = VECTOR('',#432491,1.); +#432491 = DIRECTION('',(0.,-1.,0.)); +#432492 = ORIENTED_EDGE('',*,*,#432493,.T.); +#432493 = EDGE_CURVE('',#432486,#432494,#432496,.T.); +#432494 = VERTEX_POINT('',#432495); +#432495 = CARTESIAN_POINT('',(142.95,-133.91558,1.585)); +#432496 = CIRCLE('',#432497,6.000000000042E-02); +#432497 = AXIS2_PLACEMENT_3D('',#432498,#432499,#432500); +#432498 = CARTESIAN_POINT('',(143.01,-133.9155802255,1.585)); +#432499 = DIRECTION('',(0.,0.,-1.)); +#432500 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432501 = ORIENTED_EDGE('',*,*,#432502,.T.); +#432502 = EDGE_CURVE('',#432494,#432503,#432505,.T.); +#432503 = VERTEX_POINT('',#432504); +#432504 = CARTESIAN_POINT('',(142.95,-133.63442,1.585)); +#432505 = LINE('',#432506,#432507); +#432506 = CARTESIAN_POINT('',(142.95,-133.91558,1.585)); +#432507 = VECTOR('',#432508,1.); +#432508 = DIRECTION('',(0.,1.,0.)); +#432509 = ORIENTED_EDGE('',*,*,#432510,.T.); +#432510 = EDGE_CURVE('',#432503,#432475,#432511,.T.); +#432511 = LINE('',#432512,#432513); +#432512 = CARTESIAN_POINT('',(142.95,-133.63442,1.585)); +#432513 = VECTOR('',#432514,1.); +#432514 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432515 = PLANE('',#432516); +#432516 = AXIS2_PLACEMENT_3D('',#432517,#432518,#432519); +#432517 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432518 = DIRECTION('',(0.,0.,1.)); +#432519 = DIRECTION('',(1.,0.,-0.)); +#432520 = SHELL_BASED_SURFACE_MODEL('',(#432521)); +#432521 = OPEN_SHELL('',(#432522)); +#432522 = ADVANCED_FACE('',(#432523),#432559,.T.); +#432523 = FACE_BOUND('',#432524,.F.); +#432524 = EDGE_LOOP('',(#432525,#432536,#432544,#432553)); +#432525 = ORIENTED_EDGE('',*,*,#432526,.T.); +#432526 = EDGE_CURVE('',#432527,#432529,#432531,.T.); +#432527 = VERTEX_POINT('',#432528); +#432528 = CARTESIAN_POINT('',(134.622164,-131.67,1.585)); +#432529 = VERTEX_POINT('',#432530); +#432530 = CARTESIAN_POINT('',(134.622164,-131.55,1.585)); +#432531 = CIRCLE('',#432532,6.000000000041E-02); +#432532 = AXIS2_PLACEMENT_3D('',#432533,#432534,#432535); +#432533 = CARTESIAN_POINT('',(134.62216377441,-131.61,1.585)); +#432534 = DIRECTION('',(0.,0.,-1.)); +#432535 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432536 = ORIENTED_EDGE('',*,*,#432537,.T.); +#432537 = EDGE_CURVE('',#432529,#432538,#432540,.T.); +#432538 = VERTEX_POINT('',#432539); +#432539 = CARTESIAN_POINT('',(134.837836,-131.55,1.585)); +#432540 = LINE('',#432541,#432542); +#432541 = CARTESIAN_POINT('',(134.622164,-131.55,1.585)); +#432542 = VECTOR('',#432543,1.); +#432543 = DIRECTION('',(1.,0.,0.)); +#432544 = ORIENTED_EDGE('',*,*,#432545,.T.); +#432545 = EDGE_CURVE('',#432538,#432546,#432548,.T.); +#432546 = VERTEX_POINT('',#432547); +#432547 = CARTESIAN_POINT('',(134.837836,-131.67,1.585)); +#432548 = CIRCLE('',#432549,6.000000000041E-02); +#432549 = AXIS2_PLACEMENT_3D('',#432550,#432551,#432552); +#432550 = CARTESIAN_POINT('',(134.83783622558,-131.61,1.585)); +#432551 = DIRECTION('',(0.,0.,-1.)); +#432552 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#432553 = ORIENTED_EDGE('',*,*,#432554,.T.); +#432554 = EDGE_CURVE('',#432546,#432527,#432555,.T.); +#432555 = LINE('',#432556,#432557); +#432556 = CARTESIAN_POINT('',(134.837836,-131.67,1.585)); +#432557 = VECTOR('',#432558,1.); +#432558 = DIRECTION('',(-1.,0.,0.)); +#432559 = PLANE('',#432560); +#432560 = AXIS2_PLACEMENT_3D('',#432561,#432562,#432563); +#432561 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432562 = DIRECTION('',(0.,0.,1.)); +#432563 = DIRECTION('',(1.,0.,-0.)); +#432564 = SHELL_BASED_SURFACE_MODEL('',(#432565)); +#432565 = OPEN_SHELL('',(#432566)); +#432566 = ADVANCED_FACE('',(#432567),#432603,.T.); +#432567 = FACE_BOUND('',#432568,.F.); +#432568 = EDGE_LOOP('',(#432569,#432580,#432588,#432597)); +#432569 = ORIENTED_EDGE('',*,*,#432570,.T.); +#432570 = EDGE_CURVE('',#432571,#432573,#432575,.T.); +#432571 = VERTEX_POINT('',#432572); +#432572 = CARTESIAN_POINT('',(134.622164,-130.95,1.585)); +#432573 = VERTEX_POINT('',#432574); +#432574 = CARTESIAN_POINT('',(134.622164,-130.83,1.585)); +#432575 = CIRCLE('',#432576,6.000000000041E-02); +#432576 = AXIS2_PLACEMENT_3D('',#432577,#432578,#432579); +#432577 = CARTESIAN_POINT('',(134.62216377441,-130.89,1.585)); +#432578 = DIRECTION('',(0.,0.,-1.)); +#432579 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#432580 = ORIENTED_EDGE('',*,*,#432581,.T.); +#432581 = EDGE_CURVE('',#432573,#432582,#432584,.T.); +#432582 = VERTEX_POINT('',#432583); +#432583 = CARTESIAN_POINT('',(134.837836,-130.83,1.585)); +#432584 = LINE('',#432585,#432586); +#432585 = CARTESIAN_POINT('',(134.622164,-130.83,1.585)); +#432586 = VECTOR('',#432587,1.); +#432587 = DIRECTION('',(1.,0.,0.)); +#432588 = ORIENTED_EDGE('',*,*,#432589,.T.); +#432589 = EDGE_CURVE('',#432582,#432590,#432592,.T.); +#432590 = VERTEX_POINT('',#432591); +#432591 = CARTESIAN_POINT('',(134.837836,-130.95,1.585)); +#432592 = CIRCLE('',#432593,6.000000000041E-02); +#432593 = AXIS2_PLACEMENT_3D('',#432594,#432595,#432596); +#432594 = CARTESIAN_POINT('',(134.83783622558,-130.89,1.585)); +#432595 = DIRECTION('',(0.,0.,-1.)); +#432596 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432597 = ORIENTED_EDGE('',*,*,#432598,.T.); +#432598 = EDGE_CURVE('',#432590,#432571,#432599,.T.); +#432599 = LINE('',#432600,#432601); +#432600 = CARTESIAN_POINT('',(134.837836,-130.95,1.585)); +#432601 = VECTOR('',#432602,1.); +#432602 = DIRECTION('',(-1.,0.,0.)); +#432603 = PLANE('',#432604); +#432604 = AXIS2_PLACEMENT_3D('',#432605,#432606,#432607); +#432605 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432606 = DIRECTION('',(0.,0.,1.)); +#432607 = DIRECTION('',(1.,0.,-0.)); +#432608 = SHELL_BASED_SURFACE_MODEL('',(#432609)); +#432609 = OPEN_SHELL('',(#432610)); +#432610 = ADVANCED_FACE('',(#432611),#432647,.T.); +#432611 = FACE_BOUND('',#432612,.F.); +#432612 = EDGE_LOOP('',(#432613,#432624,#432632,#432641)); +#432613 = ORIENTED_EDGE('',*,*,#432614,.T.); +#432614 = EDGE_CURVE('',#432615,#432617,#432619,.T.); +#432615 = VERTEX_POINT('',#432616); +#432616 = CARTESIAN_POINT('',(134.596359,-130.44,1.585)); +#432617 = VERTEX_POINT('',#432618); +#432618 = CARTESIAN_POINT('',(134.596359,-130.32,1.585)); +#432619 = CIRCLE('',#432620,6.000000000042E-02); +#432620 = AXIS2_PLACEMENT_3D('',#432621,#432622,#432623); +#432621 = CARTESIAN_POINT('',(134.59635877441,-130.38,1.585)); +#432622 = DIRECTION('',(0.,0.,-1.)); +#432623 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432624 = ORIENTED_EDGE('',*,*,#432625,.T.); +#432625 = EDGE_CURVE('',#432617,#432626,#432628,.T.); +#432626 = VERTEX_POINT('',#432627); +#432627 = CARTESIAN_POINT('',(134.903641,-130.32,1.585)); +#432628 = LINE('',#432629,#432630); +#432629 = CARTESIAN_POINT('',(134.596359,-130.32,1.585)); +#432630 = VECTOR('',#432631,1.); +#432631 = DIRECTION('',(1.,0.,0.)); +#432632 = ORIENTED_EDGE('',*,*,#432633,.T.); +#432633 = EDGE_CURVE('',#432626,#432634,#432636,.T.); +#432634 = VERTEX_POINT('',#432635); +#432635 = CARTESIAN_POINT('',(134.903641,-130.44,1.585)); +#432636 = CIRCLE('',#432637,6.000000000042E-02); +#432637 = AXIS2_PLACEMENT_3D('',#432638,#432639,#432640); +#432638 = CARTESIAN_POINT('',(134.90364122558,-130.38,1.585)); +#432639 = DIRECTION('',(0.,0.,-1.)); +#432640 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432641 = ORIENTED_EDGE('',*,*,#432642,.T.); +#432642 = EDGE_CURVE('',#432634,#432615,#432643,.T.); +#432643 = LINE('',#432644,#432645); +#432644 = CARTESIAN_POINT('',(134.903641,-130.44,1.585)); +#432645 = VECTOR('',#432646,1.); +#432646 = DIRECTION('',(-1.,0.,0.)); +#432647 = PLANE('',#432648); +#432648 = AXIS2_PLACEMENT_3D('',#432649,#432650,#432651); +#432649 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432650 = DIRECTION('',(0.,0.,1.)); +#432651 = DIRECTION('',(1.,0.,-0.)); +#432652 = SHELL_BASED_SURFACE_MODEL('',(#432653)); +#432653 = OPEN_SHELL('',(#432654)); +#432654 = ADVANCED_FACE('',(#432655),#432691,.T.); +#432655 = FACE_BOUND('',#432656,.F.); +#432656 = EDGE_LOOP('',(#432657,#432668,#432676,#432685)); +#432657 = ORIENTED_EDGE('',*,*,#432658,.T.); +#432658 = EDGE_CURVE('',#432659,#432661,#432663,.T.); +#432659 = VERTEX_POINT('',#432660); +#432660 = CARTESIAN_POINT('',(137.096359,-130.44,1.585)); +#432661 = VERTEX_POINT('',#432662); +#432662 = CARTESIAN_POINT('',(137.096359,-130.32,1.585)); +#432663 = CIRCLE('',#432664,6.000000000042E-02); +#432664 = AXIS2_PLACEMENT_3D('',#432665,#432666,#432667); +#432665 = CARTESIAN_POINT('',(137.09635877441,-130.38,1.585)); +#432666 = DIRECTION('',(0.,0.,-1.)); +#432667 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432668 = ORIENTED_EDGE('',*,*,#432669,.T.); +#432669 = EDGE_CURVE('',#432661,#432670,#432672,.T.); +#432670 = VERTEX_POINT('',#432671); +#432671 = CARTESIAN_POINT('',(137.403641,-130.32,1.585)); +#432672 = LINE('',#432673,#432674); +#432673 = CARTESIAN_POINT('',(137.096359,-130.32,1.585)); +#432674 = VECTOR('',#432675,1.); +#432675 = DIRECTION('',(1.,0.,0.)); +#432676 = ORIENTED_EDGE('',*,*,#432677,.T.); +#432677 = EDGE_CURVE('',#432670,#432678,#432680,.T.); +#432678 = VERTEX_POINT('',#432679); +#432679 = CARTESIAN_POINT('',(137.403641,-130.44,1.585)); +#432680 = CIRCLE('',#432681,6.000000000042E-02); +#432681 = AXIS2_PLACEMENT_3D('',#432682,#432683,#432684); +#432682 = CARTESIAN_POINT('',(137.40364122558,-130.38,1.585)); +#432683 = DIRECTION('',(0.,0.,-1.)); +#432684 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432685 = ORIENTED_EDGE('',*,*,#432686,.T.); +#432686 = EDGE_CURVE('',#432678,#432659,#432687,.T.); +#432687 = LINE('',#432688,#432689); +#432688 = CARTESIAN_POINT('',(137.403641,-130.44,1.585)); +#432689 = VECTOR('',#432690,1.); +#432690 = DIRECTION('',(-1.,0.,0.)); +#432691 = PLANE('',#432692); +#432692 = AXIS2_PLACEMENT_3D('',#432693,#432694,#432695); +#432693 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432694 = DIRECTION('',(0.,0.,1.)); +#432695 = DIRECTION('',(1.,0.,-0.)); +#432696 = SHELL_BASED_SURFACE_MODEL('',(#432697)); +#432697 = OPEN_SHELL('',(#432698)); +#432698 = ADVANCED_FACE('',(#432699),#432743,.T.); +#432699 = FACE_BOUND('',#432700,.F.); +#432700 = EDGE_LOOP('',(#432701,#432712,#432720,#432729,#432737)); +#432701 = ORIENTED_EDGE('',*,*,#432702,.T.); +#432702 = EDGE_CURVE('',#432703,#432705,#432707,.T.); +#432703 = VERTEX_POINT('',#432704); +#432704 = CARTESIAN_POINT('',(143.184567,-129.836459,1.585)); +#432705 = VERTEX_POINT('',#432706); +#432706 = CARTESIAN_POINT('',(143.3,-129.85942,1.585)); +#432707 = CIRCLE('',#432708,6.00000731865E-02); +#432708 = AXIS2_PLACEMENT_3D('',#432709,#432710,#432711); +#432709 = CARTESIAN_POINT('',(143.23999992681,-129.8594198233,1.585)); +#432710 = DIRECTION('',(0.,0.,-1.)); +#432711 = DIRECTION('',(-0.923880986636,0.382679921778,0.)); +#432712 = ORIENTED_EDGE('',*,*,#432713,.T.); +#432713 = EDGE_CURVE('',#432705,#432714,#432716,.T.); +#432714 = VERTEX_POINT('',#432715); +#432715 = CARTESIAN_POINT('',(143.3,-130.14058,1.585)); +#432716 = LINE('',#432717,#432718); +#432717 = CARTESIAN_POINT('',(143.3,-129.85942,1.585)); +#432718 = VECTOR('',#432719,1.); +#432719 = DIRECTION('',(0.,-1.,0.)); +#432720 = ORIENTED_EDGE('',*,*,#432721,.T.); +#432721 = EDGE_CURVE('',#432714,#432722,#432724,.T.); +#432722 = VERTEX_POINT('',#432723); +#432723 = CARTESIAN_POINT('',(143.18,-130.14058,1.585)); +#432724 = CIRCLE('',#432725,6.000000000043E-02); +#432725 = AXIS2_PLACEMENT_3D('',#432726,#432727,#432728); +#432726 = CARTESIAN_POINT('',(143.24,-130.1405802255,1.585)); +#432727 = DIRECTION('',(0.,0.,-1.)); +#432728 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#432729 = ORIENTED_EDGE('',*,*,#432730,.T.); +#432730 = EDGE_CURVE('',#432722,#432731,#432733,.T.); +#432731 = VERTEX_POINT('',#432732); +#432732 = CARTESIAN_POINT('',(143.18,-129.85942,1.585)); +#432733 = LINE('',#432734,#432735); +#432734 = CARTESIAN_POINT('',(143.18,-130.14058,1.585)); +#432735 = VECTOR('',#432736,1.); +#432736 = DIRECTION('',(0.,1.,0.)); +#432737 = ORIENTED_EDGE('',*,*,#432738,.T.); +#432738 = EDGE_CURVE('',#432731,#432703,#432739,.T.); +#432739 = LINE('',#432740,#432741); +#432740 = CARTESIAN_POINT('',(143.18,-129.85942,1.585)); +#432741 = VECTOR('',#432742,1.); +#432742 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432743 = PLANE('',#432744); +#432744 = AXIS2_PLACEMENT_3D('',#432745,#432746,#432747); +#432745 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432746 = DIRECTION('',(0.,0.,1.)); +#432747 = DIRECTION('',(1.,0.,-0.)); +#432748 = SHELL_BASED_SURFACE_MODEL('',(#432749)); +#432749 = OPEN_SHELL('',(#432750)); +#432750 = ADVANCED_FACE('',(#432751),#432795,.T.); +#432751 = FACE_BOUND('',#432752,.F.); +#432752 = EDGE_LOOP('',(#432753,#432764,#432772,#432781,#432789)); +#432753 = ORIENTED_EDGE('',*,*,#432754,.T.); +#432754 = EDGE_CURVE('',#432755,#432757,#432759,.T.); +#432755 = VERTEX_POINT('',#432756); +#432756 = CARTESIAN_POINT('',(144.204567,-129.836459,1.585)); +#432757 = VERTEX_POINT('',#432758); +#432758 = CARTESIAN_POINT('',(144.32,-129.85942,1.585)); +#432759 = CIRCLE('',#432760,6.000007318647E-02); +#432760 = AXIS2_PLACEMENT_3D('',#432761,#432762,#432763); +#432761 = CARTESIAN_POINT('',(144.25999992681,-129.8594198233,1.585)); +#432762 = DIRECTION('',(0.,0.,-1.)); +#432763 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#432764 = ORIENTED_EDGE('',*,*,#432765,.T.); +#432765 = EDGE_CURVE('',#432757,#432766,#432768,.T.); +#432766 = VERTEX_POINT('',#432767); +#432767 = CARTESIAN_POINT('',(144.32,-130.14058,1.585)); +#432768 = LINE('',#432769,#432770); +#432769 = CARTESIAN_POINT('',(144.32,-129.85942,1.585)); +#432770 = VECTOR('',#432771,1.); +#432771 = DIRECTION('',(0.,-1.,0.)); +#432772 = ORIENTED_EDGE('',*,*,#432773,.T.); +#432773 = EDGE_CURVE('',#432766,#432774,#432776,.T.); +#432774 = VERTEX_POINT('',#432775); +#432775 = CARTESIAN_POINT('',(144.2,-130.14058,1.585)); +#432776 = CIRCLE('',#432777,6.000000000042E-02); +#432777 = AXIS2_PLACEMENT_3D('',#432778,#432779,#432780); +#432778 = CARTESIAN_POINT('',(144.26,-130.1405802255,1.585)); +#432779 = DIRECTION('',(0.,0.,-1.)); +#432780 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#432781 = ORIENTED_EDGE('',*,*,#432782,.T.); +#432782 = EDGE_CURVE('',#432774,#432783,#432785,.T.); +#432783 = VERTEX_POINT('',#432784); +#432784 = CARTESIAN_POINT('',(144.2,-129.85942,1.585)); +#432785 = LINE('',#432786,#432787); +#432786 = CARTESIAN_POINT('',(144.2,-130.14058,1.585)); +#432787 = VECTOR('',#432788,1.); +#432788 = DIRECTION('',(0.,1.,0.)); +#432789 = ORIENTED_EDGE('',*,*,#432790,.T.); +#432790 = EDGE_CURVE('',#432783,#432755,#432791,.T.); +#432791 = LINE('',#432792,#432793); +#432792 = CARTESIAN_POINT('',(144.2,-129.85942,1.585)); +#432793 = VECTOR('',#432794,1.); +#432794 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#432795 = PLANE('',#432796); +#432796 = AXIS2_PLACEMENT_3D('',#432797,#432798,#432799); +#432797 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432798 = DIRECTION('',(0.,0.,1.)); +#432799 = DIRECTION('',(1.,0.,-0.)); +#432800 = SHELL_BASED_SURFACE_MODEL('',(#432801)); +#432801 = OPEN_SHELL('',(#432802)); +#432802 = ADVANCED_FACE('',(#432803),#432839,.T.); +#432803 = FACE_BOUND('',#432804,.F.); +#432804 = EDGE_LOOP('',(#432805,#432816,#432824,#432833)); +#432805 = ORIENTED_EDGE('',*,*,#432806,.T.); +#432806 = EDGE_CURVE('',#432807,#432809,#432811,.T.); +#432807 = VERTEX_POINT('',#432808); +#432808 = CARTESIAN_POINT('',(134.596359,-129.68,1.585)); +#432809 = VERTEX_POINT('',#432810); +#432810 = CARTESIAN_POINT('',(134.596359,-129.56,1.585)); +#432811 = CIRCLE('',#432812,6.000000000042E-02); +#432812 = AXIS2_PLACEMENT_3D('',#432813,#432814,#432815); +#432813 = CARTESIAN_POINT('',(134.59635877441,-129.62,1.585)); +#432814 = DIRECTION('',(0.,0.,-1.)); +#432815 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432816 = ORIENTED_EDGE('',*,*,#432817,.T.); +#432817 = EDGE_CURVE('',#432809,#432818,#432820,.T.); +#432818 = VERTEX_POINT('',#432819); +#432819 = CARTESIAN_POINT('',(134.903641,-129.56,1.585)); +#432820 = LINE('',#432821,#432822); +#432821 = CARTESIAN_POINT('',(134.596359,-129.56,1.585)); +#432822 = VECTOR('',#432823,1.); +#432823 = DIRECTION('',(1.,0.,0.)); +#432824 = ORIENTED_EDGE('',*,*,#432825,.T.); +#432825 = EDGE_CURVE('',#432818,#432826,#432828,.T.); +#432826 = VERTEX_POINT('',#432827); +#432827 = CARTESIAN_POINT('',(134.903641,-129.68,1.585)); +#432828 = CIRCLE('',#432829,6.000000000042E-02); +#432829 = AXIS2_PLACEMENT_3D('',#432830,#432831,#432832); +#432830 = CARTESIAN_POINT('',(134.90364122558,-129.62,1.585)); +#432831 = DIRECTION('',(0.,0.,-1.)); +#432832 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432833 = ORIENTED_EDGE('',*,*,#432834,.T.); +#432834 = EDGE_CURVE('',#432826,#432807,#432835,.T.); +#432835 = LINE('',#432836,#432837); +#432836 = CARTESIAN_POINT('',(134.903641,-129.68,1.585)); +#432837 = VECTOR('',#432838,1.); +#432838 = DIRECTION('',(-1.,0.,0.)); +#432839 = PLANE('',#432840); +#432840 = AXIS2_PLACEMENT_3D('',#432841,#432842,#432843); +#432841 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432842 = DIRECTION('',(0.,0.,1.)); +#432843 = DIRECTION('',(1.,0.,-0.)); +#432844 = SHELL_BASED_SURFACE_MODEL('',(#432845)); +#432845 = OPEN_SHELL('',(#432846)); +#432846 = ADVANCED_FACE('',(#432847),#432883,.T.); +#432847 = FACE_BOUND('',#432848,.F.); +#432848 = EDGE_LOOP('',(#432849,#432860,#432868,#432877)); +#432849 = ORIENTED_EDGE('',*,*,#432850,.T.); +#432850 = EDGE_CURVE('',#432851,#432853,#432855,.T.); +#432851 = VERTEX_POINT('',#432852); +#432852 = CARTESIAN_POINT('',(137.096359,-129.68,1.585)); +#432853 = VERTEX_POINT('',#432854); +#432854 = CARTESIAN_POINT('',(137.096359,-129.56,1.585)); +#432855 = CIRCLE('',#432856,6.000000000042E-02); +#432856 = AXIS2_PLACEMENT_3D('',#432857,#432858,#432859); +#432857 = CARTESIAN_POINT('',(137.09635877441,-129.62,1.585)); +#432858 = DIRECTION('',(0.,0.,-1.)); +#432859 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#432860 = ORIENTED_EDGE('',*,*,#432861,.T.); +#432861 = EDGE_CURVE('',#432853,#432862,#432864,.T.); +#432862 = VERTEX_POINT('',#432863); +#432863 = CARTESIAN_POINT('',(137.403641,-129.56,1.585)); +#432864 = LINE('',#432865,#432866); +#432865 = CARTESIAN_POINT('',(137.096359,-129.56,1.585)); +#432866 = VECTOR('',#432867,1.); +#432867 = DIRECTION('',(1.,0.,0.)); +#432868 = ORIENTED_EDGE('',*,*,#432869,.T.); +#432869 = EDGE_CURVE('',#432862,#432870,#432872,.T.); +#432870 = VERTEX_POINT('',#432871); +#432871 = CARTESIAN_POINT('',(137.403641,-129.68,1.585)); +#432872 = CIRCLE('',#432873,6.000000000042E-02); +#432873 = AXIS2_PLACEMENT_3D('',#432874,#432875,#432876); +#432874 = CARTESIAN_POINT('',(137.40364122558,-129.62,1.585)); +#432875 = DIRECTION('',(0.,0.,-1.)); +#432876 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#432877 = ORIENTED_EDGE('',*,*,#432878,.T.); +#432878 = EDGE_CURVE('',#432870,#432851,#432879,.T.); +#432879 = LINE('',#432880,#432881); +#432880 = CARTESIAN_POINT('',(137.403641,-129.68,1.585)); +#432881 = VECTOR('',#432882,1.); +#432882 = DIRECTION('',(-1.,0.,0.)); +#432883 = PLANE('',#432884); +#432884 = AXIS2_PLACEMENT_3D('',#432885,#432886,#432887); +#432885 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432886 = DIRECTION('',(0.,0.,1.)); +#432887 = DIRECTION('',(1.,0.,-0.)); +#432888 = SHELL_BASED_SURFACE_MODEL('',(#432889)); +#432889 = OPEN_SHELL('',(#432890)); +#432890 = ADVANCED_FACE('',(#432891),#432935,.T.); +#432891 = FACE_BOUND('',#432892,.F.); +#432892 = EDGE_LOOP('',(#432893,#432904,#432912,#432921,#432929)); +#432893 = ORIENTED_EDGE('',*,*,#432894,.T.); +#432894 = EDGE_CURVE('',#432895,#432897,#432899,.T.); +#432895 = VERTEX_POINT('',#432896); +#432896 = CARTESIAN_POINT('',(140.584567,-129.369203,1.585)); +#432897 = VERTEX_POINT('',#432898); +#432898 = CARTESIAN_POINT('',(140.7,-129.392164,1.585)); +#432899 = CIRCLE('',#432900,6.000007318646E-02); +#432900 = AXIS2_PLACEMENT_3D('',#432901,#432902,#432903); +#432901 = CARTESIAN_POINT('',(140.63999992681,-129.3921638233,1.585)); +#432902 = DIRECTION('',(0.,0.,-1.)); +#432903 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#432904 = ORIENTED_EDGE('',*,*,#432905,.T.); +#432905 = EDGE_CURVE('',#432897,#432906,#432908,.T.); +#432906 = VERTEX_POINT('',#432907); +#432907 = CARTESIAN_POINT('',(140.7,-129.607836,1.585)); +#432908 = LINE('',#432909,#432910); +#432909 = CARTESIAN_POINT('',(140.7,-129.392164,1.585)); +#432910 = VECTOR('',#432911,1.); +#432911 = DIRECTION('',(0.,-1.,0.)); +#432912 = ORIENTED_EDGE('',*,*,#432913,.T.); +#432913 = EDGE_CURVE('',#432906,#432914,#432916,.T.); +#432914 = VERTEX_POINT('',#432915); +#432915 = CARTESIAN_POINT('',(140.58,-129.607836,1.585)); +#432916 = CIRCLE('',#432917,6.00000000004E-02); +#432917 = AXIS2_PLACEMENT_3D('',#432918,#432919,#432920); +#432918 = CARTESIAN_POINT('',(140.64,-129.6078362255,1.585)); +#432919 = DIRECTION('',(0.,0.,-1.)); +#432920 = DIRECTION('',(0.999999999993,3.759795201076E-06,0.)); +#432921 = ORIENTED_EDGE('',*,*,#432922,.T.); +#432922 = EDGE_CURVE('',#432914,#432923,#432925,.T.); +#432923 = VERTEX_POINT('',#432924); +#432924 = CARTESIAN_POINT('',(140.58,-129.392164,1.585)); +#432925 = LINE('',#432926,#432927); +#432926 = CARTESIAN_POINT('',(140.58,-129.607836,1.585)); +#432927 = VECTOR('',#432928,1.); +#432928 = DIRECTION('',(0.,1.,0.)); +#432929 = ORIENTED_EDGE('',*,*,#432930,.T.); +#432930 = EDGE_CURVE('',#432923,#432895,#432931,.T.); +#432931 = LINE('',#432932,#432933); +#432932 = CARTESIAN_POINT('',(140.58,-129.392164,1.585)); +#432933 = VECTOR('',#432934,1.); +#432934 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432935 = PLANE('',#432936); +#432936 = AXIS2_PLACEMENT_3D('',#432937,#432938,#432939); +#432937 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432938 = DIRECTION('',(0.,0.,1.)); +#432939 = DIRECTION('',(1.,0.,-0.)); +#432940 = SHELL_BASED_SURFACE_MODEL('',(#432941)); +#432941 = OPEN_SHELL('',(#432942)); +#432942 = ADVANCED_FACE('',(#432943),#432987,.T.); +#432943 = FACE_BOUND('',#432944,.F.); +#432944 = EDGE_LOOP('',(#432945,#432956,#432964,#432973,#432981)); +#432945 = ORIENTED_EDGE('',*,*,#432946,.T.); +#432946 = EDGE_CURVE('',#432947,#432949,#432951,.T.); +#432947 = VERTEX_POINT('',#432948); +#432948 = CARTESIAN_POINT('',(141.304567,-129.369203,1.585)); +#432949 = VERTEX_POINT('',#432950); +#432950 = CARTESIAN_POINT('',(141.42,-129.392164,1.585)); +#432951 = CIRCLE('',#432952,6.000007318646E-02); +#432952 = AXIS2_PLACEMENT_3D('',#432953,#432954,#432955); +#432953 = CARTESIAN_POINT('',(141.35999992681,-129.3921638233,1.585)); +#432954 = DIRECTION('',(0.,0.,-1.)); +#432955 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#432956 = ORIENTED_EDGE('',*,*,#432957,.T.); +#432957 = EDGE_CURVE('',#432949,#432958,#432960,.T.); +#432958 = VERTEX_POINT('',#432959); +#432959 = CARTESIAN_POINT('',(141.42,-129.607836,1.585)); +#432960 = LINE('',#432961,#432962); +#432961 = CARTESIAN_POINT('',(141.42,-129.392164,1.585)); +#432962 = VECTOR('',#432963,1.); +#432963 = DIRECTION('',(0.,-1.,0.)); +#432964 = ORIENTED_EDGE('',*,*,#432965,.T.); +#432965 = EDGE_CURVE('',#432958,#432966,#432968,.T.); +#432966 = VERTEX_POINT('',#432967); +#432967 = CARTESIAN_POINT('',(141.3,-129.607836,1.585)); +#432968 = CIRCLE('',#432969,6.000000000041E-02); +#432969 = AXIS2_PLACEMENT_3D('',#432970,#432971,#432972); +#432970 = CARTESIAN_POINT('',(141.36,-129.6078362255,1.585)); +#432971 = DIRECTION('',(0.,0.,-1.)); +#432972 = DIRECTION('',(0.999999999993,3.759794727379E-06,0.)); +#432973 = ORIENTED_EDGE('',*,*,#432974,.T.); +#432974 = EDGE_CURVE('',#432966,#432975,#432977,.T.); +#432975 = VERTEX_POINT('',#432976); +#432976 = CARTESIAN_POINT('',(141.3,-129.392164,1.585)); +#432977 = LINE('',#432978,#432979); +#432978 = CARTESIAN_POINT('',(141.3,-129.607836,1.585)); +#432979 = VECTOR('',#432980,1.); +#432980 = DIRECTION('',(0.,1.,0.)); +#432981 = ORIENTED_EDGE('',*,*,#432982,.T.); +#432982 = EDGE_CURVE('',#432975,#432947,#432983,.T.); +#432983 = LINE('',#432984,#432985); +#432984 = CARTESIAN_POINT('',(141.3,-129.392164,1.585)); +#432985 = VECTOR('',#432986,1.); +#432986 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#432987 = PLANE('',#432988); +#432988 = AXIS2_PLACEMENT_3D('',#432989,#432990,#432991); +#432989 = CARTESIAN_POINT('',(0.,0.,1.585)); +#432990 = DIRECTION('',(0.,0.,1.)); +#432991 = DIRECTION('',(1.,0.,-0.)); +#432992 = SHELL_BASED_SURFACE_MODEL('',(#432993)); +#432993 = OPEN_SHELL('',(#432994)); +#432994 = ADVANCED_FACE('',(#432995),#433039,.T.); +#432995 = FACE_BOUND('',#432996,.F.); +#432996 = EDGE_LOOP('',(#432997,#433008,#433016,#433025,#433033)); +#432997 = ORIENTED_EDGE('',*,*,#432998,.T.); +#432998 = EDGE_CURVE('',#432999,#433001,#433003,.T.); +#432999 = VERTEX_POINT('',#433000); +#433000 = CARTESIAN_POINT('',(141.834567,-129.369203,1.585)); +#433001 = VERTEX_POINT('',#433002); +#433002 = CARTESIAN_POINT('',(141.95,-129.392164,1.585)); +#433003 = CIRCLE('',#433004,6.000007318646E-02); +#433004 = AXIS2_PLACEMENT_3D('',#433005,#433006,#433007); +#433005 = CARTESIAN_POINT('',(141.88999992681,-129.3921638233,1.585)); +#433006 = DIRECTION('',(0.,0.,-1.)); +#433007 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#433008 = ORIENTED_EDGE('',*,*,#433009,.T.); +#433009 = EDGE_CURVE('',#433001,#433010,#433012,.T.); +#433010 = VERTEX_POINT('',#433011); +#433011 = CARTESIAN_POINT('',(141.95,-129.607836,1.585)); +#433012 = LINE('',#433013,#433014); +#433013 = CARTESIAN_POINT('',(141.95,-129.392164,1.585)); +#433014 = VECTOR('',#433015,1.); +#433015 = DIRECTION('',(0.,-1.,0.)); +#433016 = ORIENTED_EDGE('',*,*,#433017,.T.); +#433017 = EDGE_CURVE('',#433010,#433018,#433020,.T.); +#433018 = VERTEX_POINT('',#433019); +#433019 = CARTESIAN_POINT('',(141.83,-129.607836,1.585)); +#433020 = CIRCLE('',#433021,6.00000000004E-02); +#433021 = AXIS2_PLACEMENT_3D('',#433022,#433023,#433024); +#433022 = CARTESIAN_POINT('',(141.89,-129.6078362255,1.585)); +#433023 = DIRECTION('',(0.,0.,-1.)); +#433024 = DIRECTION('',(0.999999999993,3.759795201076E-06,0.)); +#433025 = ORIENTED_EDGE('',*,*,#433026,.T.); +#433026 = EDGE_CURVE('',#433018,#433027,#433029,.T.); +#433027 = VERTEX_POINT('',#433028); +#433028 = CARTESIAN_POINT('',(141.83,-129.392164,1.585)); +#433029 = LINE('',#433030,#433031); +#433030 = CARTESIAN_POINT('',(141.83,-129.607836,1.585)); +#433031 = VECTOR('',#433032,1.); +#433032 = DIRECTION('',(0.,1.,0.)); +#433033 = ORIENTED_EDGE('',*,*,#433034,.T.); +#433034 = EDGE_CURVE('',#433027,#432999,#433035,.T.); +#433035 = LINE('',#433036,#433037); +#433036 = CARTESIAN_POINT('',(141.83,-129.392164,1.585)); +#433037 = VECTOR('',#433038,1.); +#433038 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#433039 = PLANE('',#433040); +#433040 = AXIS2_PLACEMENT_3D('',#433041,#433042,#433043); +#433041 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433042 = DIRECTION('',(0.,0.,1.)); +#433043 = DIRECTION('',(1.,0.,-0.)); +#433044 = SHELL_BASED_SURFACE_MODEL('',(#433045)); +#433045 = OPEN_SHELL('',(#433046)); +#433046 = ADVANCED_FACE('',(#433047),#433091,.T.); +#433047 = FACE_BOUND('',#433048,.F.); +#433048 = EDGE_LOOP('',(#433049,#433060,#433068,#433077,#433085)); +#433049 = ORIENTED_EDGE('',*,*,#433050,.T.); +#433050 = EDGE_CURVE('',#433051,#433053,#433055,.T.); +#433051 = VERTEX_POINT('',#433052); +#433052 = CARTESIAN_POINT('',(142.554567,-129.369203,1.585)); +#433053 = VERTEX_POINT('',#433054); +#433054 = CARTESIAN_POINT('',(142.67,-129.392164,1.585)); +#433055 = CIRCLE('',#433056,6.000007318646E-02); +#433056 = AXIS2_PLACEMENT_3D('',#433057,#433058,#433059); +#433057 = CARTESIAN_POINT('',(142.60999992681,-129.3921638233,1.585)); +#433058 = DIRECTION('',(0.,0.,-1.)); +#433059 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#433060 = ORIENTED_EDGE('',*,*,#433061,.T.); +#433061 = EDGE_CURVE('',#433053,#433062,#433064,.T.); +#433062 = VERTEX_POINT('',#433063); +#433063 = CARTESIAN_POINT('',(142.67,-129.607836,1.585)); +#433064 = LINE('',#433065,#433066); +#433065 = CARTESIAN_POINT('',(142.67,-129.392164,1.585)); +#433066 = VECTOR('',#433067,1.); +#433067 = DIRECTION('',(0.,-1.,0.)); +#433068 = ORIENTED_EDGE('',*,*,#433069,.T.); +#433069 = EDGE_CURVE('',#433062,#433070,#433072,.T.); +#433070 = VERTEX_POINT('',#433071); +#433071 = CARTESIAN_POINT('',(142.55,-129.607836,1.585)); +#433072 = CIRCLE('',#433073,6.000000000041E-02); +#433073 = AXIS2_PLACEMENT_3D('',#433074,#433075,#433076); +#433074 = CARTESIAN_POINT('',(142.61,-129.6078362255,1.585)); +#433075 = DIRECTION('',(0.,0.,-1.)); +#433076 = DIRECTION('',(0.999999999993,3.759794727379E-06,0.)); +#433077 = ORIENTED_EDGE('',*,*,#433078,.T.); +#433078 = EDGE_CURVE('',#433070,#433079,#433081,.T.); +#433079 = VERTEX_POINT('',#433080); +#433080 = CARTESIAN_POINT('',(142.55,-129.392164,1.585)); +#433081 = LINE('',#433082,#433083); +#433082 = CARTESIAN_POINT('',(142.55,-129.607836,1.585)); +#433083 = VECTOR('',#433084,1.); +#433084 = DIRECTION('',(0.,1.,0.)); +#433085 = ORIENTED_EDGE('',*,*,#433086,.T.); +#433086 = EDGE_CURVE('',#433079,#433051,#433087,.T.); +#433087 = LINE('',#433088,#433089); +#433088 = CARTESIAN_POINT('',(142.55,-129.392164,1.585)); +#433089 = VECTOR('',#433090,1.); +#433090 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#433091 = PLANE('',#433092); +#433092 = AXIS2_PLACEMENT_3D('',#433093,#433094,#433095); +#433093 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433094 = DIRECTION('',(0.,0.,1.)); +#433095 = DIRECTION('',(1.,0.,-0.)); +#433096 = SHELL_BASED_SURFACE_MODEL('',(#433097)); +#433097 = OPEN_SHELL('',(#433098)); +#433098 = ADVANCED_FACE('',(#433099,#433215),#433265,.T.); +#433099 = FACE_BOUND('',#433100,.F.); +#433100 = EDGE_LOOP('',(#433101,#433112,#433120,#433128,#433136,#433144, + #433152,#433160,#433168,#433176,#433184,#433192,#433200,#433209)); +#433101 = ORIENTED_EDGE('',*,*,#433102,.T.); +#433102 = EDGE_CURVE('',#433103,#433105,#433107,.T.); +#433103 = VERTEX_POINT('',#433104); +#433104 = CARTESIAN_POINT('',(122.036,-126.31,1.585)); +#433105 = VERTEX_POINT('',#433106); +#433106 = CARTESIAN_POINT('',(122.086,-126.26,1.585)); +#433107 = CIRCLE('',#433108,5.000014378934E-02); +#433108 = AXIS2_PLACEMENT_3D('',#433109,#433110,#433111); +#433109 = CARTESIAN_POINT('',(122.08600014378,-126.3100001437,1.585)); +#433110 = DIRECTION('',(0.,0.,-1.)); +#433111 = DIRECTION('',(-0.999999999996,2.875774186499E-06,0.)); +#433112 = ORIENTED_EDGE('',*,*,#433113,.T.); +#433113 = EDGE_CURVE('',#433105,#433114,#433116,.T.); +#433114 = VERTEX_POINT('',#433115); +#433115 = CARTESIAN_POINT('',(143.19,-126.26,1.585)); +#433116 = LINE('',#433117,#433118); +#433117 = CARTESIAN_POINT('',(122.086,-126.26,1.585)); +#433118 = VECTOR('',#433119,1.); +#433119 = DIRECTION('',(1.,0.,0.)); +#433120 = ORIENTED_EDGE('',*,*,#433121,.T.); +#433121 = EDGE_CURVE('',#433114,#433122,#433124,.T.); +#433122 = VERTEX_POINT('',#433123); +#433123 = CARTESIAN_POINT('',(143.209134,-126.263806,1.585)); +#433124 = LINE('',#433125,#433126); +#433125 = CARTESIAN_POINT('',(143.19,-126.26,1.585)); +#433126 = VECTOR('',#433127,1.); +#433127 = DIRECTION('',(0.980785174845,-0.195090852694,0.)); +#433128 = ORIENTED_EDGE('',*,*,#433129,.T.); +#433129 = EDGE_CURVE('',#433122,#433130,#433132,.T.); +#433130 = VERTEX_POINT('',#433131); +#433131 = CARTESIAN_POINT('',(143.228113,-126.277636,1.585)); +#433132 = LINE('',#433133,#433134); +#433133 = CARTESIAN_POINT('',(143.209134,-126.263806,1.585)); +#433134 = VECTOR('',#433135,1.); +#433135 = DIRECTION('',(0.808186984202,-0.588925970362,0.)); +#433136 = ORIENTED_EDGE('',*,*,#433137,.T.); +#433137 = EDGE_CURVE('',#433130,#433138,#433140,.T.); +#433138 = VERTEX_POINT('',#433139); +#433139 = CARTESIAN_POINT('',(149.766194,-133.980866,1.585)); +#433140 = LINE('',#433141,#433142); +#433141 = CARTESIAN_POINT('',(143.228113,-126.277636,1.585)); +#433142 = VECTOR('',#433143,1.); +#433143 = DIRECTION('',(0.647092936776,-0.762411130018,0.)); +#433144 = ORIENTED_EDGE('',*,*,#433145,.T.); +#433145 = EDGE_CURVE('',#433138,#433146,#433148,.T.); +#433146 = VERTEX_POINT('',#433147); +#433147 = CARTESIAN_POINT('',(149.77,-134.,1.585)); +#433148 = LINE('',#433149,#433150); +#433149 = CARTESIAN_POINT('',(149.766194,-133.980866,1.585)); +#433150 = VECTOR('',#433151,1.); +#433151 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#433152 = ORIENTED_EDGE('',*,*,#433153,.T.); +#433153 = EDGE_CURVE('',#433146,#433154,#433156,.T.); +#433154 = VERTEX_POINT('',#433155); +#433155 = CARTESIAN_POINT('',(149.767597,-143.015315,1.585)); +#433156 = LINE('',#433157,#433158); +#433157 = CARTESIAN_POINT('',(149.77,-134.,1.585)); +#433158 = VECTOR('',#433159,1.); +#433159 = DIRECTION('',(-2.665464173634E-04,-0.999999964477,0.)); +#433160 = ORIENTED_EDGE('',*,*,#433161,.T.); +#433161 = EDGE_CURVE('',#433154,#433162,#433164,.T.); +#433162 = VERTEX_POINT('',#433163); +#433163 = CARTESIAN_POINT('',(149.758113,-143.032364,1.585)); +#433164 = LINE('',#433165,#433166); +#433165 = CARTESIAN_POINT('',(149.767597,-143.015315,1.585)); +#433166 = VECTOR('',#433167,1.); +#433167 = DIRECTION('',(-0.486125934588,-0.873888766217,0.)); +#433168 = ORIENTED_EDGE('',*,*,#433169,.T.); +#433169 = EDGE_CURVE('',#433162,#433170,#433172,.T.); +#433170 = VERTEX_POINT('',#433171); +#433171 = CARTESIAN_POINT('',(143.228113,-150.722364,1.585)); +#433172 = LINE('',#433173,#433174); +#433173 = CARTESIAN_POINT('',(149.758113,-143.032364,1.585)); +#433174 = VECTOR('',#433175,1.); +#433175 = DIRECTION('',(-0.64727429236,-0.762257168185,0.)); +#433176 = ORIENTED_EDGE('',*,*,#433177,.T.); +#433177 = EDGE_CURVE('',#433170,#433178,#433180,.T.); +#433178 = VERTEX_POINT('',#433179); +#433179 = CARTESIAN_POINT('',(143.209134,-150.736194,1.585)); +#433180 = LINE('',#433181,#433182); +#433181 = CARTESIAN_POINT('',(143.228113,-150.722364,1.585)); +#433182 = VECTOR('',#433183,1.); +#433183 = DIRECTION('',(-0.808186984201,-0.588925970363,0.)); +#433184 = ORIENTED_EDGE('',*,*,#433185,.T.); +#433185 = EDGE_CURVE('',#433178,#433186,#433188,.T.); +#433186 = VERTEX_POINT('',#433187); +#433187 = CARTESIAN_POINT('',(143.19,-150.74,1.585)); +#433188 = LINE('',#433189,#433190); +#433189 = CARTESIAN_POINT('',(143.209134,-150.736194,1.585)); +#433190 = VECTOR('',#433191,1.); +#433191 = DIRECTION('',(-0.980785174845,-0.195090852694,0.)); +#433192 = ORIENTED_EDGE('',*,*,#433193,.T.); +#433193 = EDGE_CURVE('',#433186,#433194,#433196,.T.); +#433194 = VERTEX_POINT('',#433195); +#433195 = CARTESIAN_POINT('',(122.086,-150.74,1.585)); +#433196 = LINE('',#433197,#433198); +#433197 = CARTESIAN_POINT('',(143.19,-150.74,1.585)); +#433198 = VECTOR('',#433199,1.); +#433199 = DIRECTION('',(-1.,0.,0.)); +#433200 = ORIENTED_EDGE('',*,*,#433201,.T.); +#433201 = EDGE_CURVE('',#433194,#433202,#433204,.T.); +#433202 = VERTEX_POINT('',#433203); +#433203 = CARTESIAN_POINT('',(122.036,-150.69,1.585)); +#433204 = CIRCLE('',#433205,5.000014378935E-02); +#433205 = AXIS2_PLACEMENT_3D('',#433206,#433207,#433208); +#433206 = CARTESIAN_POINT('',(122.08600014378,-150.6899998562,1.585)); +#433207 = DIRECTION('',(0.,0.,-1.)); +#433208 = DIRECTION('',(-2.875774754932E-06,-0.999999999996,-0.)); +#433209 = ORIENTED_EDGE('',*,*,#433210,.T.); +#433210 = EDGE_CURVE('',#433202,#433103,#433211,.T.); +#433211 = LINE('',#433212,#433213); +#433212 = CARTESIAN_POINT('',(122.036,-150.69,1.585)); +#433213 = VECTOR('',#433214,1.); +#433214 = DIRECTION('',(0.,1.,0.)); +#433215 = FACE_BOUND('',#433216,.F.); +#433216 = EDGE_LOOP('',(#433217,#433227,#433235,#433243,#433251,#433259) + ); +#433217 = ORIENTED_EDGE('',*,*,#433218,.T.); +#433218 = EDGE_CURVE('',#433219,#433221,#433223,.T.); +#433219 = VERTEX_POINT('',#433220); +#433220 = CARTESIAN_POINT('',(149.67,-134.018365,1.585)); +#433221 = VERTEX_POINT('',#433222); +#433222 = CARTESIAN_POINT('',(143.166863,-126.36,1.585)); +#433223 = LINE('',#433224,#433225); +#433224 = CARTESIAN_POINT('',(149.67,-134.018365,1.585)); +#433225 = VECTOR('',#433226,1.); +#433226 = DIRECTION('',(-0.647274292962,0.762257167674,0.)); +#433227 = ORIENTED_EDGE('',*,*,#433228,.T.); +#433228 = EDGE_CURVE('',#433221,#433229,#433231,.T.); +#433229 = VERTEX_POINT('',#433230); +#433230 = CARTESIAN_POINT('',(122.136,-126.36,1.585)); +#433231 = LINE('',#433232,#433233); +#433232 = CARTESIAN_POINT('',(143.166863,-126.36,1.585)); +#433233 = VECTOR('',#433234,1.); +#433234 = DIRECTION('',(-1.,0.,0.)); +#433235 = ORIENTED_EDGE('',*,*,#433236,.T.); +#433236 = EDGE_CURVE('',#433229,#433237,#433239,.T.); +#433237 = VERTEX_POINT('',#433238); +#433238 = CARTESIAN_POINT('',(122.136,-150.64,1.585)); +#433239 = LINE('',#433240,#433241); +#433240 = CARTESIAN_POINT('',(122.136,-126.36,1.585)); +#433241 = VECTOR('',#433242,1.); +#433242 = DIRECTION('',(0.,-1.,0.)); +#433243 = ORIENTED_EDGE('',*,*,#433244,.T.); +#433244 = EDGE_CURVE('',#433237,#433245,#433247,.T.); +#433245 = VERTEX_POINT('',#433246); +#433246 = CARTESIAN_POINT('',(143.166863,-150.64,1.585)); +#433247 = LINE('',#433248,#433249); +#433248 = CARTESIAN_POINT('',(122.136,-150.64,1.585)); +#433249 = VECTOR('',#433250,1.); +#433250 = DIRECTION('',(1.,0.,0.)); +#433251 = ORIENTED_EDGE('',*,*,#433252,.T.); +#433252 = EDGE_CURVE('',#433245,#433253,#433255,.T.); +#433253 = VERTEX_POINT('',#433254); +#433254 = CARTESIAN_POINT('',(149.67,-142.981634,1.585)); +#433255 = LINE('',#433256,#433257); +#433256 = CARTESIAN_POINT('',(143.166863,-150.64,1.585)); +#433257 = VECTOR('',#433258,1.); +#433258 = DIRECTION('',(0.647274243853,0.762257209375,0.)); +#433259 = ORIENTED_EDGE('',*,*,#433260,.T.); +#433260 = EDGE_CURVE('',#433253,#433219,#433261,.T.); +#433261 = LINE('',#433262,#433263); +#433262 = CARTESIAN_POINT('',(149.67,-142.981634,1.585)); +#433263 = VECTOR('',#433264,1.); +#433264 = DIRECTION('',(0.,1.,0.)); +#433265 = PLANE('',#433266); +#433266 = AXIS2_PLACEMENT_3D('',#433267,#433268,#433269); +#433267 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433268 = DIRECTION('',(0.,0.,1.)); +#433269 = DIRECTION('',(1.,0.,-0.)); +#433270 = SHELL_BASED_SURFACE_MODEL('',(#433271)); +#433271 = OPEN_SHELL('',(#433272)); +#433272 = ADVANCED_FACE('',(#433273),#433359,.T.); +#433273 = FACE_BOUND('',#433274,.F.); +#433274 = EDGE_LOOP('',(#433275,#433286,#433294,#433303,#433311,#433319, + #433327,#433336,#433344,#433353)); +#433275 = ORIENTED_EDGE('',*,*,#433276,.T.); +#433276 = EDGE_CURVE('',#433277,#433279,#433281,.T.); +#433277 = VERTEX_POINT('',#433278); +#433278 = CARTESIAN_POINT('',(150.58,-145.64,1.585)); +#433279 = VERTEX_POINT('',#433280); +#433280 = CARTESIAN_POINT('',(150.64,-145.58,1.585)); +#433281 = CIRCLE('',#433282,5.99993201625E-02); +#433282 = AXIS2_PLACEMENT_3D('',#433283,#433284,#433285); +#433283 = CARTESIAN_POINT('',(150.63999932015,-145.6399993201,1.585)); +#433284 = DIRECTION('',(0.,0.,-1.)); +#433285 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#433286 = ORIENTED_EDGE('',*,*,#433287,.T.); +#433287 = EDGE_CURVE('',#433279,#433288,#433290,.T.); +#433288 = VERTEX_POINT('',#433289); +#433289 = CARTESIAN_POINT('',(150.89,-145.58,1.585)); +#433290 = LINE('',#433291,#433292); +#433291 = CARTESIAN_POINT('',(150.64,-145.58,1.585)); +#433292 = VECTOR('',#433293,1.); +#433293 = DIRECTION('',(1.,0.,0.)); +#433294 = ORIENTED_EDGE('',*,*,#433295,.T.); +#433295 = EDGE_CURVE('',#433288,#433296,#433298,.T.); +#433296 = VERTEX_POINT('',#433297); +#433297 = CARTESIAN_POINT('',(150.89,-145.7,1.585)); +#433298 = CIRCLE('',#433299,6.000000000042E-02); +#433299 = AXIS2_PLACEMENT_3D('',#433300,#433301,#433302); +#433300 = CARTESIAN_POINT('',(150.89000022558,-145.64,1.585)); +#433301 = DIRECTION('',(0.,0.,-1.)); +#433302 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#433303 = ORIENTED_EDGE('',*,*,#433304,.T.); +#433304 = EDGE_CURVE('',#433296,#433305,#433307,.T.); +#433305 = VERTEX_POINT('',#433306); +#433306 = CARTESIAN_POINT('',(150.7,-145.7,1.585)); +#433307 = LINE('',#433308,#433309); +#433308 = CARTESIAN_POINT('',(150.89,-145.7,1.585)); +#433309 = VECTOR('',#433310,1.); +#433310 = DIRECTION('',(-1.,0.,0.)); +#433311 = ORIENTED_EDGE('',*,*,#433312,.T.); +#433312 = EDGE_CURVE('',#433305,#433313,#433315,.T.); +#433313 = VERTEX_POINT('',#433314); +#433314 = CARTESIAN_POINT('',(150.7,-150.5,1.585)); +#433315 = LINE('',#433316,#433317); +#433316 = CARTESIAN_POINT('',(150.7,-145.7,1.585)); +#433317 = VECTOR('',#433318,1.); +#433318 = DIRECTION('',(0.,-1.,0.)); +#433319 = ORIENTED_EDGE('',*,*,#433320,.T.); +#433320 = EDGE_CURVE('',#433313,#433321,#433323,.T.); +#433321 = VERTEX_POINT('',#433322); +#433322 = CARTESIAN_POINT('',(150.89,-150.5,1.585)); +#433323 = LINE('',#433324,#433325); +#433324 = CARTESIAN_POINT('',(150.7,-150.5,1.585)); +#433325 = VECTOR('',#433326,1.); +#433326 = DIRECTION('',(1.,0.,0.)); +#433327 = ORIENTED_EDGE('',*,*,#433328,.T.); +#433328 = EDGE_CURVE('',#433321,#433329,#433331,.T.); +#433329 = VERTEX_POINT('',#433330); +#433330 = CARTESIAN_POINT('',(150.89,-150.62,1.585)); +#433331 = CIRCLE('',#433332,6.000000000043E-02); +#433332 = AXIS2_PLACEMENT_3D('',#433333,#433334,#433335); +#433333 = CARTESIAN_POINT('',(150.89000022558,-150.56,1.585)); +#433334 = DIRECTION('',(0.,0.,-1.)); +#433335 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#433336 = ORIENTED_EDGE('',*,*,#433337,.T.); +#433337 = EDGE_CURVE('',#433329,#433338,#433340,.T.); +#433338 = VERTEX_POINT('',#433339); +#433339 = CARTESIAN_POINT('',(150.64,-150.62,1.585)); +#433340 = LINE('',#433341,#433342); +#433341 = CARTESIAN_POINT('',(150.89,-150.62,1.585)); +#433342 = VECTOR('',#433343,1.); +#433343 = DIRECTION('',(-1.,0.,0.)); +#433344 = ORIENTED_EDGE('',*,*,#433345,.T.); +#433345 = EDGE_CURVE('',#433338,#433346,#433348,.T.); +#433346 = VERTEX_POINT('',#433347); +#433347 = CARTESIAN_POINT('',(150.58,-150.56,1.585)); +#433348 = CIRCLE('',#433349,5.999932016261E-02); +#433349 = AXIS2_PLACEMENT_3D('',#433350,#433351,#433352); +#433350 = CARTESIAN_POINT('',(150.63999932015,-150.5600006798,1.585)); +#433351 = DIRECTION('',(0.,0.,-1.)); +#433352 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#433353 = ORIENTED_EDGE('',*,*,#433354,.T.); +#433354 = EDGE_CURVE('',#433346,#433277,#433355,.T.); +#433355 = LINE('',#433356,#433357); +#433356 = CARTESIAN_POINT('',(150.58,-150.56,1.585)); +#433357 = VECTOR('',#433358,1.); +#433358 = DIRECTION('',(0.,1.,0.)); +#433359 = PLANE('',#433360); +#433360 = AXIS2_PLACEMENT_3D('',#433361,#433362,#433363); +#433361 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433362 = DIRECTION('',(0.,0.,1.)); +#433363 = DIRECTION('',(1.,0.,-0.)); +#433364 = SHELL_BASED_SURFACE_MODEL('',(#433365)); +#433365 = OPEN_SHELL('',(#433366)); +#433366 = ADVANCED_FACE('',(#433367),#433453,.T.); +#433367 = FACE_BOUND('',#433368,.F.); +#433368 = EDGE_LOOP('',(#433369,#433380,#433388,#433397,#433405,#433414, + #433422,#433431,#433439,#433447)); +#433369 = ORIENTED_EDGE('',*,*,#433370,.T.); +#433370 = EDGE_CURVE('',#433371,#433373,#433375,.T.); +#433371 = VERTEX_POINT('',#433372); +#433372 = CARTESIAN_POINT('',(154.11,-145.7,1.585)); +#433373 = VERTEX_POINT('',#433374); +#433374 = CARTESIAN_POINT('',(154.11,-145.58,1.585)); +#433375 = CIRCLE('',#433376,6.000000000041E-02); +#433376 = AXIS2_PLACEMENT_3D('',#433377,#433378,#433379); +#433377 = CARTESIAN_POINT('',(154.10999977441,-145.64,1.585)); +#433378 = DIRECTION('',(0.,0.,-1.)); +#433379 = DIRECTION('',(3.759794727381E-06,-0.999999999993,0.)); +#433380 = ORIENTED_EDGE('',*,*,#433381,.T.); +#433381 = EDGE_CURVE('',#433373,#433382,#433384,.T.); +#433382 = VERTEX_POINT('',#433383); +#433383 = CARTESIAN_POINT('',(154.36,-145.58,1.585)); +#433384 = LINE('',#433385,#433386); +#433385 = CARTESIAN_POINT('',(154.11,-145.58,1.585)); +#433386 = VECTOR('',#433387,1.); +#433387 = DIRECTION('',(1.,0.,0.)); +#433388 = ORIENTED_EDGE('',*,*,#433389,.T.); +#433389 = EDGE_CURVE('',#433382,#433390,#433392,.T.); +#433390 = VERTEX_POINT('',#433391); +#433391 = CARTESIAN_POINT('',(154.42,-145.64,1.585)); +#433392 = CIRCLE('',#433393,5.99993201625E-02); +#433393 = AXIS2_PLACEMENT_3D('',#433394,#433395,#433396); +#433394 = CARTESIAN_POINT('',(154.36000067984,-145.6399993201,1.585)); +#433395 = DIRECTION('',(0.,0.,-1.)); +#433396 = DIRECTION('',(-1.133081706884E-05,0.999999999936,0.)); +#433397 = ORIENTED_EDGE('',*,*,#433398,.T.); +#433398 = EDGE_CURVE('',#433390,#433399,#433401,.T.); +#433399 = VERTEX_POINT('',#433400); +#433400 = CARTESIAN_POINT('',(154.42,-150.56,1.585)); +#433401 = LINE('',#433402,#433403); +#433402 = CARTESIAN_POINT('',(154.42,-145.64,1.585)); +#433403 = VECTOR('',#433404,1.); +#433404 = DIRECTION('',(0.,-1.,0.)); +#433405 = ORIENTED_EDGE('',*,*,#433406,.T.); +#433406 = EDGE_CURVE('',#433399,#433407,#433409,.T.); +#433407 = VERTEX_POINT('',#433408); +#433408 = CARTESIAN_POINT('',(154.36,-150.62,1.585)); +#433409 = CIRCLE('',#433410,5.999932016253E-02); +#433410 = AXIS2_PLACEMENT_3D('',#433411,#433412,#433413); +#433411 = CARTESIAN_POINT('',(154.36000067984,-150.5600006798,1.585)); +#433412 = DIRECTION('',(0.,0.,-1.)); +#433413 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#433414 = ORIENTED_EDGE('',*,*,#433415,.T.); +#433415 = EDGE_CURVE('',#433407,#433416,#433418,.T.); +#433416 = VERTEX_POINT('',#433417); +#433417 = CARTESIAN_POINT('',(154.11,-150.62,1.585)); +#433418 = LINE('',#433419,#433420); +#433419 = CARTESIAN_POINT('',(154.36,-150.62,1.585)); +#433420 = VECTOR('',#433421,1.); +#433421 = DIRECTION('',(-1.,0.,0.)); +#433422 = ORIENTED_EDGE('',*,*,#433423,.T.); +#433423 = EDGE_CURVE('',#433416,#433424,#433426,.T.); +#433424 = VERTEX_POINT('',#433425); +#433425 = CARTESIAN_POINT('',(154.11,-150.5,1.585)); +#433426 = CIRCLE('',#433427,6.000000000043E-02); +#433427 = AXIS2_PLACEMENT_3D('',#433428,#433429,#433430); +#433428 = CARTESIAN_POINT('',(154.10999977441,-150.56,1.585)); +#433429 = DIRECTION('',(0.,0.,-1.)); +#433430 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#433431 = ORIENTED_EDGE('',*,*,#433432,.T.); +#433432 = EDGE_CURVE('',#433424,#433433,#433435,.T.); +#433433 = VERTEX_POINT('',#433434); +#433434 = CARTESIAN_POINT('',(154.3,-150.5,1.585)); +#433435 = LINE('',#433436,#433437); +#433436 = CARTESIAN_POINT('',(154.11,-150.5,1.585)); +#433437 = VECTOR('',#433438,1.); +#433438 = DIRECTION('',(1.,0.,0.)); +#433439 = ORIENTED_EDGE('',*,*,#433440,.T.); +#433440 = EDGE_CURVE('',#433433,#433441,#433443,.T.); +#433441 = VERTEX_POINT('',#433442); +#433442 = CARTESIAN_POINT('',(154.3,-145.7,1.585)); +#433443 = LINE('',#433444,#433445); +#433444 = CARTESIAN_POINT('',(154.3,-150.5,1.585)); +#433445 = VECTOR('',#433446,1.); +#433446 = DIRECTION('',(0.,1.,0.)); +#433447 = ORIENTED_EDGE('',*,*,#433448,.T.); +#433448 = EDGE_CURVE('',#433441,#433371,#433449,.T.); +#433449 = LINE('',#433450,#433451); +#433450 = CARTESIAN_POINT('',(154.3,-145.7,1.585)); +#433451 = VECTOR('',#433452,1.); +#433452 = DIRECTION('',(-1.,0.,0.)); +#433453 = PLANE('',#433454); +#433454 = AXIS2_PLACEMENT_3D('',#433455,#433456,#433457); +#433455 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433456 = DIRECTION('',(0.,0.,1.)); +#433457 = DIRECTION('',(1.,0.,-0.)); +#433458 = SHELL_BASED_SURFACE_MODEL('',(#433459)); +#433459 = OPEN_SHELL('',(#433460)); +#433460 = ADVANCED_FACE('',(#433461),#433472,.T.); +#433461 = FACE_BOUND('',#433462,.T.); +#433462 = EDGE_LOOP('',(#433463)); +#433463 = ORIENTED_EDGE('',*,*,#433464,.T.); +#433464 = EDGE_CURVE('',#433465,#433465,#433467,.T.); +#433465 = VERTEX_POINT('',#433466); +#433466 = CARTESIAN_POINT('',(142.1,-125.95,1.585)); +#433467 = CIRCLE('',#433468,0.1); +#433468 = AXIS2_PLACEMENT_3D('',#433469,#433470,#433471); +#433469 = CARTESIAN_POINT('',(142.,-125.95,1.585)); +#433470 = DIRECTION('',(0.,0.,1.)); +#433471 = DIRECTION('',(1.,0.,-0.)); +#433472 = PLANE('',#433473); +#433473 = AXIS2_PLACEMENT_3D('',#433474,#433475,#433476); +#433474 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433475 = DIRECTION('',(0.,0.,1.)); +#433476 = DIRECTION('',(1.,0.,-0.)); +#433477 = SHELL_BASED_SURFACE_MODEL('',(#433478)); +#433478 = OPEN_SHELL('',(#433479)); +#433479 = ADVANCED_FACE('',(#433480),#433652,.T.); +#433480 = FACE_BOUND('',#433481,.F.); +#433481 = EDGE_LOOP('',(#433482,#433493,#433501,#433509,#433517,#433525, + #433533,#433542,#433550,#433558,#433566,#433574,#433582,#433590, + #433598,#433606,#433614,#433622,#433630,#433638,#433646)); +#433482 = ORIENTED_EDGE('',*,*,#433483,.T.); +#433483 = EDGE_CURVE('',#433484,#433486,#433488,.T.); +#433484 = VERTEX_POINT('',#433485); +#433485 = CARTESIAN_POINT('',(124.044567,-122.527039,1.585)); +#433486 = VERTEX_POINT('',#433487); +#433487 = CARTESIAN_POINT('',(124.16,-122.55,1.585)); +#433488 = CIRCLE('',#433489,6.000007318647E-02); +#433489 = AXIS2_PLACEMENT_3D('',#433490,#433491,#433492); +#433490 = CARTESIAN_POINT('',(124.09999992681,-122.5499998233,1.585)); +#433491 = DIRECTION('',(0.,0.,-1.)); +#433492 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#433493 = ORIENTED_EDGE('',*,*,#433494,.T.); +#433494 = EDGE_CURVE('',#433486,#433495,#433497,.T.); +#433495 = VERTEX_POINT('',#433496); +#433496 = CARTESIAN_POINT('',(124.16,-123.225147,1.585)); +#433497 = LINE('',#433498,#433499); +#433498 = CARTESIAN_POINT('',(124.16,-122.55,1.585)); +#433499 = VECTOR('',#433500,1.); +#433500 = DIRECTION('',(0.,-1.,0.)); +#433501 = ORIENTED_EDGE('',*,*,#433502,.T.); +#433502 = EDGE_CURVE('',#433495,#433503,#433505,.T.); +#433503 = VERTEX_POINT('',#433504); +#433504 = CARTESIAN_POINT('',(125.274853,-124.34,1.585)); +#433505 = LINE('',#433506,#433507); +#433506 = CARTESIAN_POINT('',(124.16,-123.225147,1.585)); +#433507 = VECTOR('',#433508,1.); +#433508 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#433509 = ORIENTED_EDGE('',*,*,#433510,.T.); +#433510 = EDGE_CURVE('',#433503,#433511,#433513,.T.); +#433511 = VERTEX_POINT('',#433512); +#433512 = CARTESIAN_POINT('',(129.225148,-124.34,1.585)); +#433513 = LINE('',#433514,#433515); +#433514 = CARTESIAN_POINT('',(125.274853,-124.34,1.585)); +#433515 = VECTOR('',#433516,1.); +#433516 = DIRECTION('',(1.,0.,0.)); +#433517 = ORIENTED_EDGE('',*,*,#433518,.T.); +#433518 = EDGE_CURVE('',#433511,#433519,#433521,.T.); +#433519 = VERTEX_POINT('',#433520); +#433520 = CARTESIAN_POINT('',(130.34,-123.225147,1.585)); +#433521 = LINE('',#433522,#433523); +#433522 = CARTESIAN_POINT('',(129.225148,-124.34,1.585)); +#433523 = VECTOR('',#433524,1.); +#433524 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#433525 = ORIENTED_EDGE('',*,*,#433526,.T.); +#433526 = EDGE_CURVE('',#433519,#433527,#433529,.T.); +#433527 = VERTEX_POINT('',#433528); +#433528 = CARTESIAN_POINT('',(130.34,-122.55,1.585)); +#433529 = LINE('',#433530,#433531); +#433530 = CARTESIAN_POINT('',(130.34,-123.225147,1.585)); +#433531 = VECTOR('',#433532,1.); +#433532 = DIRECTION('',(0.,1.,0.)); +#433533 = ORIENTED_EDGE('',*,*,#433534,.T.); +#433534 = EDGE_CURVE('',#433527,#433535,#433537,.T.); +#433535 = VERTEX_POINT('',#433536); +#433536 = CARTESIAN_POINT('',(130.46,-122.55,1.585)); +#433537 = CIRCLE('',#433538,6.000000000043E-02); +#433538 = AXIS2_PLACEMENT_3D('',#433539,#433540,#433541); +#433539 = CARTESIAN_POINT('',(130.4,-122.5499997744,1.585)); +#433540 = DIRECTION('',(0.,0.,-1.)); +#433541 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#433542 = ORIENTED_EDGE('',*,*,#433543,.T.); +#433543 = EDGE_CURVE('',#433535,#433544,#433546,.T.); +#433544 = VERTEX_POINT('',#433545); +#433545 = CARTESIAN_POINT('',(130.46,-123.25,1.585)); +#433546 = LINE('',#433547,#433548); +#433547 = CARTESIAN_POINT('',(130.46,-122.55,1.585)); +#433548 = VECTOR('',#433549,1.); +#433549 = DIRECTION('',(0.,-1.,0.)); +#433550 = ORIENTED_EDGE('',*,*,#433551,.T.); +#433551 = EDGE_CURVE('',#433544,#433552,#433554,.T.); +#433552 = VERTEX_POINT('',#433553); +#433553 = CARTESIAN_POINT('',(130.455433,-123.272961,1.585)); +#433554 = LINE('',#433555,#433556); +#433555 = CARTESIAN_POINT('',(130.46,-123.25,1.585)); +#433556 = VECTOR('',#433557,1.); +#433557 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#433558 = ORIENTED_EDGE('',*,*,#433559,.T.); +#433559 = EDGE_CURVE('',#433552,#433560,#433562,.T.); +#433560 = VERTEX_POINT('',#433561); +#433561 = CARTESIAN_POINT('',(130.442427,-123.292426,1.585)); +#433562 = LINE('',#433563,#433564); +#433563 = CARTESIAN_POINT('',(130.455433,-123.272961,1.585)); +#433564 = VECTOR('',#433565,1.); +#433565 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#433566 = ORIENTED_EDGE('',*,*,#433567,.T.); +#433567 = EDGE_CURVE('',#433560,#433568,#433570,.T.); +#433568 = VERTEX_POINT('',#433569); +#433569 = CARTESIAN_POINT('',(129.292426,-124.442426,1.585)); +#433570 = LINE('',#433571,#433572); +#433571 = CARTESIAN_POINT('',(130.442427,-123.292426,1.585)); +#433572 = VECTOR('',#433573,1.); +#433573 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#433574 = ORIENTED_EDGE('',*,*,#433575,.T.); +#433575 = EDGE_CURVE('',#433568,#433576,#433578,.T.); +#433576 = VERTEX_POINT('',#433577); +#433577 = CARTESIAN_POINT('',(129.272961,-124.455433,1.585)); +#433578 = LINE('',#433579,#433580); +#433579 = CARTESIAN_POINT('',(129.292426,-124.442426,1.585)); +#433580 = VECTOR('',#433581,1.); +#433581 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#433582 = ORIENTED_EDGE('',*,*,#433583,.T.); +#433583 = EDGE_CURVE('',#433576,#433584,#433586,.T.); +#433584 = VERTEX_POINT('',#433585); +#433585 = CARTESIAN_POINT('',(129.25,-124.46,1.585)); +#433586 = LINE('',#433587,#433588); +#433587 = CARTESIAN_POINT('',(129.272961,-124.455433,1.585)); +#433588 = VECTOR('',#433589,1.); +#433589 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#433590 = ORIENTED_EDGE('',*,*,#433591,.T.); +#433591 = EDGE_CURVE('',#433584,#433592,#433594,.T.); +#433592 = VERTEX_POINT('',#433593); +#433593 = CARTESIAN_POINT('',(125.25,-124.46,1.585)); +#433594 = LINE('',#433595,#433596); +#433595 = CARTESIAN_POINT('',(129.25,-124.46,1.585)); +#433596 = VECTOR('',#433597,1.); +#433597 = DIRECTION('',(-1.,0.,0.)); +#433598 = ORIENTED_EDGE('',*,*,#433599,.T.); +#433599 = EDGE_CURVE('',#433592,#433600,#433602,.T.); +#433600 = VERTEX_POINT('',#433601); +#433601 = CARTESIAN_POINT('',(125.227039,-124.455433,1.585)); +#433602 = LINE('',#433603,#433604); +#433603 = CARTESIAN_POINT('',(125.25,-124.46,1.585)); +#433604 = VECTOR('',#433605,1.); +#433605 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#433606 = ORIENTED_EDGE('',*,*,#433607,.T.); +#433607 = EDGE_CURVE('',#433600,#433608,#433610,.T.); +#433608 = VERTEX_POINT('',#433609); +#433609 = CARTESIAN_POINT('',(125.207574,-124.442427,1.585)); +#433610 = LINE('',#433611,#433612); +#433611 = CARTESIAN_POINT('',(125.227039,-124.455433,1.585)); +#433612 = VECTOR('',#433613,1.); +#433613 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#433614 = ORIENTED_EDGE('',*,*,#433615,.T.); +#433615 = EDGE_CURVE('',#433608,#433616,#433618,.T.); +#433616 = VERTEX_POINT('',#433617); +#433617 = CARTESIAN_POINT('',(124.057574,-123.292426,1.585)); +#433618 = LINE('',#433619,#433620); +#433619 = CARTESIAN_POINT('',(125.207574,-124.442427,1.585)); +#433620 = VECTOR('',#433621,1.); +#433621 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#433622 = ORIENTED_EDGE('',*,*,#433623,.T.); +#433623 = EDGE_CURVE('',#433616,#433624,#433626,.T.); +#433624 = VERTEX_POINT('',#433625); +#433625 = CARTESIAN_POINT('',(124.044567,-123.272961,1.585)); +#433626 = LINE('',#433627,#433628); +#433627 = CARTESIAN_POINT('',(124.057574,-123.292426,1.585)); +#433628 = VECTOR('',#433629,1.); +#433629 = DIRECTION('',(-0.555596893535,0.831451797698,0.)); +#433630 = ORIENTED_EDGE('',*,*,#433631,.T.); +#433631 = EDGE_CURVE('',#433624,#433632,#433634,.T.); +#433632 = VERTEX_POINT('',#433633); +#433633 = CARTESIAN_POINT('',(124.04,-123.25,1.585)); +#433634 = LINE('',#433635,#433636); +#433635 = CARTESIAN_POINT('',(124.044567,-123.272961,1.585)); +#433636 = VECTOR('',#433637,1.); +#433637 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#433638 = ORIENTED_EDGE('',*,*,#433639,.T.); +#433639 = EDGE_CURVE('',#433632,#433640,#433642,.T.); +#433640 = VERTEX_POINT('',#433641); +#433641 = CARTESIAN_POINT('',(124.04,-122.55,1.585)); +#433642 = LINE('',#433643,#433644); +#433643 = CARTESIAN_POINT('',(124.04,-123.25,1.585)); +#433644 = VECTOR('',#433645,1.); +#433645 = DIRECTION('',(0.,1.,0.)); +#433646 = ORIENTED_EDGE('',*,*,#433647,.T.); +#433647 = EDGE_CURVE('',#433640,#433484,#433648,.T.); +#433648 = LINE('',#433649,#433650); +#433649 = CARTESIAN_POINT('',(124.04,-122.55,1.585)); +#433650 = VECTOR('',#433651,1.); +#433651 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#433652 = PLANE('',#433653); +#433653 = AXIS2_PLACEMENT_3D('',#433654,#433655,#433656); +#433654 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433655 = DIRECTION('',(0.,0.,1.)); +#433656 = DIRECTION('',(1.,0.,-0.)); +#433657 = SHELL_BASED_SURFACE_MODEL('',(#433658)); +#433658 = OPEN_SHELL('',(#433659)); +#433659 = ADVANCED_FACE('',(#433660),#433832,.T.); +#433660 = FACE_BOUND('',#433661,.F.); +#433661 = EDGE_LOOP('',(#433662,#433673,#433681,#433689,#433697,#433705, + #433713,#433722,#433730,#433738,#433746,#433754,#433762,#433770, + #433778,#433786,#433794,#433802,#433810,#433818,#433826)); +#433662 = ORIENTED_EDGE('',*,*,#433663,.T.); +#433663 = EDGE_CURVE('',#433664,#433666,#433668,.T.); +#433664 = VERTEX_POINT('',#433665); +#433665 = CARTESIAN_POINT('',(134.294567,-122.527039,1.585)); +#433666 = VERTEX_POINT('',#433667); +#433667 = CARTESIAN_POINT('',(134.41,-122.55,1.585)); +#433668 = CIRCLE('',#433669,6.000007318647E-02); +#433669 = AXIS2_PLACEMENT_3D('',#433670,#433671,#433672); +#433670 = CARTESIAN_POINT('',(134.34999992681,-122.5499998233,1.585)); +#433671 = DIRECTION('',(0.,0.,-1.)); +#433672 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#433673 = ORIENTED_EDGE('',*,*,#433674,.T.); +#433674 = EDGE_CURVE('',#433666,#433675,#433677,.T.); +#433675 = VERTEX_POINT('',#433676); +#433676 = CARTESIAN_POINT('',(134.41,-123.225147,1.585)); +#433677 = LINE('',#433678,#433679); +#433678 = CARTESIAN_POINT('',(134.41,-122.55,1.585)); +#433679 = VECTOR('',#433680,1.); +#433680 = DIRECTION('',(0.,-1.,0.)); +#433681 = ORIENTED_EDGE('',*,*,#433682,.T.); +#433682 = EDGE_CURVE('',#433675,#433683,#433685,.T.); +#433683 = VERTEX_POINT('',#433684); +#433684 = CARTESIAN_POINT('',(135.524853,-124.34,1.585)); +#433685 = LINE('',#433686,#433687); +#433686 = CARTESIAN_POINT('',(134.41,-123.225147,1.585)); +#433687 = VECTOR('',#433688,1.); +#433688 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#433689 = ORIENTED_EDGE('',*,*,#433690,.T.); +#433690 = EDGE_CURVE('',#433683,#433691,#433693,.T.); +#433691 = VERTEX_POINT('',#433692); +#433692 = CARTESIAN_POINT('',(139.475148,-124.34,1.585)); +#433693 = LINE('',#433694,#433695); +#433694 = CARTESIAN_POINT('',(135.524853,-124.34,1.585)); +#433695 = VECTOR('',#433696,1.); +#433696 = DIRECTION('',(1.,0.,0.)); +#433697 = ORIENTED_EDGE('',*,*,#433698,.T.); +#433698 = EDGE_CURVE('',#433691,#433699,#433701,.T.); +#433699 = VERTEX_POINT('',#433700); +#433700 = CARTESIAN_POINT('',(140.59,-123.225147,1.585)); +#433701 = LINE('',#433702,#433703); +#433702 = CARTESIAN_POINT('',(139.475148,-124.34,1.585)); +#433703 = VECTOR('',#433704,1.); +#433704 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#433705 = ORIENTED_EDGE('',*,*,#433706,.T.); +#433706 = EDGE_CURVE('',#433699,#433707,#433709,.T.); +#433707 = VERTEX_POINT('',#433708); +#433708 = CARTESIAN_POINT('',(140.59,-122.55,1.585)); +#433709 = LINE('',#433710,#433711); +#433710 = CARTESIAN_POINT('',(140.59,-123.225147,1.585)); +#433711 = VECTOR('',#433712,1.); +#433712 = DIRECTION('',(0.,1.,0.)); +#433713 = ORIENTED_EDGE('',*,*,#433714,.T.); +#433714 = EDGE_CURVE('',#433707,#433715,#433717,.T.); +#433715 = VERTEX_POINT('',#433716); +#433716 = CARTESIAN_POINT('',(140.71,-122.55,1.585)); +#433717 = CIRCLE('',#433718,6.000000000043E-02); +#433718 = AXIS2_PLACEMENT_3D('',#433719,#433720,#433721); +#433719 = CARTESIAN_POINT('',(140.65,-122.5499997744,1.585)); +#433720 = DIRECTION('',(0.,0.,-1.)); +#433721 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#433722 = ORIENTED_EDGE('',*,*,#433723,.T.); +#433723 = EDGE_CURVE('',#433715,#433724,#433726,.T.); +#433724 = VERTEX_POINT('',#433725); +#433725 = CARTESIAN_POINT('',(140.71,-123.25,1.585)); +#433726 = LINE('',#433727,#433728); +#433727 = CARTESIAN_POINT('',(140.71,-122.55,1.585)); +#433728 = VECTOR('',#433729,1.); +#433729 = DIRECTION('',(0.,-1.,0.)); +#433730 = ORIENTED_EDGE('',*,*,#433731,.T.); +#433731 = EDGE_CURVE('',#433724,#433732,#433734,.T.); +#433732 = VERTEX_POINT('',#433733); +#433733 = CARTESIAN_POINT('',(140.705433,-123.272961,1.585)); +#433734 = LINE('',#433735,#433736); +#433735 = CARTESIAN_POINT('',(140.71,-123.25,1.585)); +#433736 = VECTOR('',#433737,1.); +#433737 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#433738 = ORIENTED_EDGE('',*,*,#433739,.T.); +#433739 = EDGE_CURVE('',#433732,#433740,#433742,.T.); +#433740 = VERTEX_POINT('',#433741); +#433741 = CARTESIAN_POINT('',(140.692427,-123.292426,1.585)); +#433742 = LINE('',#433743,#433744); +#433743 = CARTESIAN_POINT('',(140.705433,-123.272961,1.585)); +#433744 = VECTOR('',#433745,1.); +#433745 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#433746 = ORIENTED_EDGE('',*,*,#433747,.T.); +#433747 = EDGE_CURVE('',#433740,#433748,#433750,.T.); +#433748 = VERTEX_POINT('',#433749); +#433749 = CARTESIAN_POINT('',(139.542426,-124.442426,1.585)); +#433750 = LINE('',#433751,#433752); +#433751 = CARTESIAN_POINT('',(140.692427,-123.292426,1.585)); +#433752 = VECTOR('',#433753,1.); +#433753 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#433754 = ORIENTED_EDGE('',*,*,#433755,.T.); +#433755 = EDGE_CURVE('',#433748,#433756,#433758,.T.); +#433756 = VERTEX_POINT('',#433757); +#433757 = CARTESIAN_POINT('',(139.522961,-124.455433,1.585)); +#433758 = LINE('',#433759,#433760); +#433759 = CARTESIAN_POINT('',(139.542426,-124.442426,1.585)); +#433760 = VECTOR('',#433761,1.); +#433761 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#433762 = ORIENTED_EDGE('',*,*,#433763,.T.); +#433763 = EDGE_CURVE('',#433756,#433764,#433766,.T.); +#433764 = VERTEX_POINT('',#433765); +#433765 = CARTESIAN_POINT('',(139.5,-124.46,1.585)); +#433766 = LINE('',#433767,#433768); +#433767 = CARTESIAN_POINT('',(139.522961,-124.455433,1.585)); +#433768 = VECTOR('',#433769,1.); +#433769 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#433770 = ORIENTED_EDGE('',*,*,#433771,.T.); +#433771 = EDGE_CURVE('',#433764,#433772,#433774,.T.); +#433772 = VERTEX_POINT('',#433773); +#433773 = CARTESIAN_POINT('',(135.5,-124.46,1.585)); +#433774 = LINE('',#433775,#433776); +#433775 = CARTESIAN_POINT('',(139.5,-124.46,1.585)); +#433776 = VECTOR('',#433777,1.); +#433777 = DIRECTION('',(-1.,0.,0.)); +#433778 = ORIENTED_EDGE('',*,*,#433779,.T.); +#433779 = EDGE_CURVE('',#433772,#433780,#433782,.T.); +#433780 = VERTEX_POINT('',#433781); +#433781 = CARTESIAN_POINT('',(135.477039,-124.455433,1.585)); +#433782 = LINE('',#433783,#433784); +#433783 = CARTESIAN_POINT('',(135.5,-124.46,1.585)); +#433784 = VECTOR('',#433785,1.); +#433785 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#433786 = ORIENTED_EDGE('',*,*,#433787,.T.); +#433787 = EDGE_CURVE('',#433780,#433788,#433790,.T.); +#433788 = VERTEX_POINT('',#433789); +#433789 = CARTESIAN_POINT('',(135.457574,-124.442427,1.585)); +#433790 = LINE('',#433791,#433792); +#433791 = CARTESIAN_POINT('',(135.477039,-124.455433,1.585)); +#433792 = VECTOR('',#433793,1.); +#433793 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#433794 = ORIENTED_EDGE('',*,*,#433795,.T.); +#433795 = EDGE_CURVE('',#433788,#433796,#433798,.T.); +#433796 = VERTEX_POINT('',#433797); +#433797 = CARTESIAN_POINT('',(134.307574,-123.292426,1.585)); +#433798 = LINE('',#433799,#433800); +#433799 = CARTESIAN_POINT('',(135.457574,-124.442427,1.585)); +#433800 = VECTOR('',#433801,1.); +#433801 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#433802 = ORIENTED_EDGE('',*,*,#433803,.T.); +#433803 = EDGE_CURVE('',#433796,#433804,#433806,.T.); +#433804 = VERTEX_POINT('',#433805); +#433805 = CARTESIAN_POINT('',(134.294567,-123.272961,1.585)); +#433806 = LINE('',#433807,#433808); +#433807 = CARTESIAN_POINT('',(134.307574,-123.292426,1.585)); +#433808 = VECTOR('',#433809,1.); +#433809 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#433810 = ORIENTED_EDGE('',*,*,#433811,.T.); +#433811 = EDGE_CURVE('',#433804,#433812,#433814,.T.); +#433812 = VERTEX_POINT('',#433813); +#433813 = CARTESIAN_POINT('',(134.29,-123.25,1.585)); +#433814 = LINE('',#433815,#433816); +#433815 = CARTESIAN_POINT('',(134.294567,-123.272961,1.585)); +#433816 = VECTOR('',#433817,1.); +#433817 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#433818 = ORIENTED_EDGE('',*,*,#433819,.T.); +#433819 = EDGE_CURVE('',#433812,#433820,#433822,.T.); +#433820 = VERTEX_POINT('',#433821); +#433821 = CARTESIAN_POINT('',(134.29,-122.55,1.585)); +#433822 = LINE('',#433823,#433824); +#433823 = CARTESIAN_POINT('',(134.29,-123.25,1.585)); +#433824 = VECTOR('',#433825,1.); +#433825 = DIRECTION('',(0.,1.,0.)); +#433826 = ORIENTED_EDGE('',*,*,#433827,.T.); +#433827 = EDGE_CURVE('',#433820,#433664,#433828,.T.); +#433828 = LINE('',#433829,#433830); +#433829 = CARTESIAN_POINT('',(134.29,-122.55,1.585)); +#433830 = VECTOR('',#433831,1.); +#433831 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#433832 = PLANE('',#433833); +#433833 = AXIS2_PLACEMENT_3D('',#433834,#433835,#433836); +#433834 = CARTESIAN_POINT('',(0.,0.,1.585)); +#433835 = DIRECTION('',(0.,0.,1.)); +#433836 = DIRECTION('',(1.,0.,-0.)); +#433837 = SHELL_BASED_SURFACE_MODEL('',(#433838)); +#433838 = OPEN_SHELL('',(#433839)); +#433839 = ADVANCED_FACE('',(#433840),#434045,.T.); +#433840 = FACE_BOUND('',#433841,.F.); +#433841 = EDGE_LOOP('',(#433842,#433853,#433861,#433869,#433877,#433886, + #433894,#433902,#433910,#433918,#433926,#433935,#433943,#433951, + #433959,#433967,#433975,#433983,#433991,#433999,#434007,#434015, + #434023,#434031,#434039)); +#433842 = ORIENTED_EDGE('',*,*,#433843,.T.); +#433843 = EDGE_CURVE('',#433844,#433846,#433848,.T.); +#433844 = VERTEX_POINT('',#433845); +#433845 = CARTESIAN_POINT('',(144.544567,-122.527039,1.585)); +#433846 = VERTEX_POINT('',#433847); +#433847 = CARTESIAN_POINT('',(144.66,-122.55,1.585)); +#433848 = CIRCLE('',#433849,6.000007318647E-02); +#433849 = AXIS2_PLACEMENT_3D('',#433850,#433851,#433852); +#433850 = CARTESIAN_POINT('',(144.59999992681,-122.5499998233,1.585)); +#433851 = DIRECTION('',(0.,0.,-1.)); +#433852 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#433853 = ORIENTED_EDGE('',*,*,#433854,.T.); +#433854 = EDGE_CURVE('',#433846,#433855,#433857,.T.); +#433855 = VERTEX_POINT('',#433856); +#433856 = CARTESIAN_POINT('',(144.66,-123.225147,1.585)); +#433857 = LINE('',#433858,#433859); +#433858 = CARTESIAN_POINT('',(144.66,-122.55,1.585)); +#433859 = VECTOR('',#433860,1.); +#433860 = DIRECTION('',(0.,-1.,0.)); +#433861 = ORIENTED_EDGE('',*,*,#433862,.T.); +#433862 = EDGE_CURVE('',#433855,#433863,#433865,.T.); +#433863 = VERTEX_POINT('',#433864); +#433864 = CARTESIAN_POINT('',(144.868319,-123.433466,1.585)); +#433865 = LINE('',#433866,#433867); +#433866 = CARTESIAN_POINT('',(144.66,-123.225147,1.585)); +#433867 = VECTOR('',#433868,1.); +#433868 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#433869 = ORIENTED_EDGE('',*,*,#433870,.T.); +#433870 = EDGE_CURVE('',#433863,#433871,#433873,.T.); +#433871 = VERTEX_POINT('',#433872); +#433872 = CARTESIAN_POINT('',(144.852882,-123.470736,1.585)); +#433873 = LINE('',#433874,#433875); +#433874 = CARTESIAN_POINT('',(144.868319,-123.433466,1.585)); +#433875 = VECTOR('',#433876,1.); +#433876 = DIRECTION('',(-0.382667786069,-0.923886013264,0.)); +#433877 = ORIENTED_EDGE('',*,*,#433878,.T.); +#433878 = EDGE_CURVE('',#433871,#433879,#433881,.T.); +#433879 = VERTEX_POINT('',#433880); +#433880 = CARTESIAN_POINT('',(145.029264,-123.647118,1.585)); +#433881 = CIRCLE('',#433882,0.150000816101); +#433882 = AXIS2_PLACEMENT_3D('',#433883,#433884,#433885); +#433883 = CARTESIAN_POINT('',(145.00000066697,-123.499999333,1.585)); +#433884 = DIRECTION('',(0.,0.,1.)); +#433885 = DIRECTION('',(-0.980785776996,0.19508782546,0.)); +#433886 = ORIENTED_EDGE('',*,*,#433887,.T.); +#433887 = EDGE_CURVE('',#433879,#433888,#433890,.T.); +#433888 = VERTEX_POINT('',#433889); +#433889 = CARTESIAN_POINT('',(145.066533,-123.63168,1.585)); +#433890 = LINE('',#433891,#433892); +#433891 = CARTESIAN_POINT('',(145.029264,-123.647118,1.585)); +#433892 = VECTOR('',#433893,1.); +#433893 = DIRECTION('',(0.923873618707,0.382697709239,0.)); +#433894 = ORIENTED_EDGE('',*,*,#433895,.T.); +#433895 = EDGE_CURVE('',#433888,#433896,#433898,.T.); +#433896 = VERTEX_POINT('',#433897); +#433897 = CARTESIAN_POINT('',(145.774853,-124.34,1.585)); +#433898 = LINE('',#433899,#433900); +#433899 = CARTESIAN_POINT('',(145.066533,-123.63168,1.585)); +#433900 = VECTOR('',#433901,1.); +#433901 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#433902 = ORIENTED_EDGE('',*,*,#433903,.T.); +#433903 = EDGE_CURVE('',#433896,#433904,#433906,.T.); +#433904 = VERTEX_POINT('',#433905); +#433905 = CARTESIAN_POINT('',(149.725148,-124.34,1.585)); +#433906 = LINE('',#433907,#433908); +#433907 = CARTESIAN_POINT('',(145.774853,-124.34,1.585)); +#433908 = VECTOR('',#433909,1.); +#433909 = DIRECTION('',(1.,0.,0.)); +#433910 = ORIENTED_EDGE('',*,*,#433911,.T.); +#433911 = EDGE_CURVE('',#433904,#433912,#433914,.T.); +#433912 = VERTEX_POINT('',#433913); +#433913 = CARTESIAN_POINT('',(150.84,-123.225147,1.585)); +#433914 = LINE('',#433915,#433916); +#433915 = CARTESIAN_POINT('',(149.725148,-124.34,1.585)); +#433916 = VECTOR('',#433917,1.); +#433917 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#433918 = ORIENTED_EDGE('',*,*,#433919,.T.); +#433919 = EDGE_CURVE('',#433912,#433920,#433922,.T.); +#433920 = VERTEX_POINT('',#433921); +#433921 = CARTESIAN_POINT('',(150.84,-122.55,1.585)); +#433922 = LINE('',#433923,#433924); +#433923 = CARTESIAN_POINT('',(150.84,-123.225147,1.585)); +#433924 = VECTOR('',#433925,1.); +#433925 = DIRECTION('',(0.,1.,0.)); +#433926 = ORIENTED_EDGE('',*,*,#433927,.T.); +#433927 = EDGE_CURVE('',#433920,#433928,#433930,.T.); +#433928 = VERTEX_POINT('',#433929); +#433929 = CARTESIAN_POINT('',(150.96,-122.55,1.585)); +#433930 = CIRCLE('',#433931,6.000000000043E-02); +#433931 = AXIS2_PLACEMENT_3D('',#433932,#433933,#433934); +#433932 = CARTESIAN_POINT('',(150.9,-122.5499997744,1.585)); +#433933 = DIRECTION('',(0.,0.,-1.)); +#433934 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#433935 = ORIENTED_EDGE('',*,*,#433936,.T.); +#433936 = EDGE_CURVE('',#433928,#433937,#433939,.T.); +#433937 = VERTEX_POINT('',#433938); +#433938 = CARTESIAN_POINT('',(150.96,-123.25,1.585)); +#433939 = LINE('',#433940,#433941); +#433940 = CARTESIAN_POINT('',(150.96,-122.55,1.585)); +#433941 = VECTOR('',#433942,1.); +#433942 = DIRECTION('',(0.,-1.,0.)); +#433943 = ORIENTED_EDGE('',*,*,#433944,.T.); +#433944 = EDGE_CURVE('',#433937,#433945,#433947,.T.); +#433945 = VERTEX_POINT('',#433946); +#433946 = CARTESIAN_POINT('',(150.955433,-123.272961,1.585)); +#433947 = LINE('',#433948,#433949); +#433948 = CARTESIAN_POINT('',(150.96,-123.25,1.585)); +#433949 = VECTOR('',#433950,1.); +#433950 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#433951 = ORIENTED_EDGE('',*,*,#433952,.T.); +#433952 = EDGE_CURVE('',#433945,#433953,#433955,.T.); +#433953 = VERTEX_POINT('',#433954); +#433954 = CARTESIAN_POINT('',(150.942427,-123.292426,1.585)); +#433955 = LINE('',#433956,#433957); +#433956 = CARTESIAN_POINT('',(150.955433,-123.272961,1.585)); +#433957 = VECTOR('',#433958,1.); +#433958 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#433959 = ORIENTED_EDGE('',*,*,#433960,.T.); +#433960 = EDGE_CURVE('',#433953,#433961,#433963,.T.); +#433961 = VERTEX_POINT('',#433962); +#433962 = CARTESIAN_POINT('',(149.792426,-124.442426,1.585)); +#433963 = LINE('',#433964,#433965); +#433964 = CARTESIAN_POINT('',(150.942427,-123.292426,1.585)); +#433965 = VECTOR('',#433966,1.); +#433966 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#433967 = ORIENTED_EDGE('',*,*,#433968,.T.); +#433968 = EDGE_CURVE('',#433961,#433969,#433971,.T.); +#433969 = VERTEX_POINT('',#433970); +#433970 = CARTESIAN_POINT('',(149.772961,-124.455433,1.585)); +#433971 = LINE('',#433972,#433973); +#433972 = CARTESIAN_POINT('',(149.792426,-124.442426,1.585)); +#433973 = VECTOR('',#433974,1.); +#433974 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#433975 = ORIENTED_EDGE('',*,*,#433976,.T.); +#433976 = EDGE_CURVE('',#433969,#433977,#433979,.T.); +#433977 = VERTEX_POINT('',#433978); +#433978 = CARTESIAN_POINT('',(149.75,-124.46,1.585)); +#433979 = LINE('',#433980,#433981); +#433980 = CARTESIAN_POINT('',(149.772961,-124.455433,1.585)); +#433981 = VECTOR('',#433982,1.); +#433982 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#433983 = ORIENTED_EDGE('',*,*,#433984,.T.); +#433984 = EDGE_CURVE('',#433977,#433985,#433987,.T.); +#433985 = VERTEX_POINT('',#433986); +#433986 = CARTESIAN_POINT('',(145.75,-124.46,1.585)); +#433987 = LINE('',#433988,#433989); +#433988 = CARTESIAN_POINT('',(149.75,-124.46,1.585)); +#433989 = VECTOR('',#433990,1.); +#433990 = DIRECTION('',(-1.,0.,0.)); +#433991 = ORIENTED_EDGE('',*,*,#433992,.T.); +#433992 = EDGE_CURVE('',#433985,#433993,#433995,.T.); +#433993 = VERTEX_POINT('',#433994); +#433994 = CARTESIAN_POINT('',(145.727039,-124.455433,1.585)); +#433995 = LINE('',#433996,#433997); +#433996 = CARTESIAN_POINT('',(145.75,-124.46,1.585)); +#433997 = VECTOR('',#433998,1.); +#433998 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#433999 = ORIENTED_EDGE('',*,*,#434000,.T.); +#434000 = EDGE_CURVE('',#433993,#434001,#434003,.T.); +#434001 = VERTEX_POINT('',#434002); +#434002 = CARTESIAN_POINT('',(145.707574,-124.442427,1.585)); +#434003 = LINE('',#434004,#434005); +#434004 = CARTESIAN_POINT('',(145.727039,-124.455433,1.585)); +#434005 = VECTOR('',#434006,1.); +#434006 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#434007 = ORIENTED_EDGE('',*,*,#434008,.T.); +#434008 = EDGE_CURVE('',#434001,#434009,#434011,.T.); +#434009 = VERTEX_POINT('',#434010); +#434010 = CARTESIAN_POINT('',(144.557574,-123.292426,1.585)); +#434011 = LINE('',#434012,#434013); +#434012 = CARTESIAN_POINT('',(145.707574,-124.442427,1.585)); +#434013 = VECTOR('',#434014,1.); +#434014 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#434015 = ORIENTED_EDGE('',*,*,#434016,.T.); +#434016 = EDGE_CURVE('',#434009,#434017,#434019,.T.); +#434017 = VERTEX_POINT('',#434018); +#434018 = CARTESIAN_POINT('',(144.544567,-123.272961,1.585)); +#434019 = LINE('',#434020,#434021); +#434020 = CARTESIAN_POINT('',(144.557574,-123.292426,1.585)); +#434021 = VECTOR('',#434022,1.); +#434022 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#434023 = ORIENTED_EDGE('',*,*,#434024,.T.); +#434024 = EDGE_CURVE('',#434017,#434025,#434027,.T.); +#434025 = VERTEX_POINT('',#434026); +#434026 = CARTESIAN_POINT('',(144.54,-123.25,1.585)); +#434027 = LINE('',#434028,#434029); +#434028 = CARTESIAN_POINT('',(144.544567,-123.272961,1.585)); +#434029 = VECTOR('',#434030,1.); +#434030 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#434031 = ORIENTED_EDGE('',*,*,#434032,.T.); +#434032 = EDGE_CURVE('',#434025,#434033,#434035,.T.); +#434033 = VERTEX_POINT('',#434034); +#434034 = CARTESIAN_POINT('',(144.54,-122.55,1.585)); +#434035 = LINE('',#434036,#434037); +#434036 = CARTESIAN_POINT('',(144.54,-123.25,1.585)); +#434037 = VECTOR('',#434038,1.); +#434038 = DIRECTION('',(0.,1.,0.)); +#434039 = ORIENTED_EDGE('',*,*,#434040,.T.); +#434040 = EDGE_CURVE('',#434033,#433844,#434041,.T.); +#434041 = LINE('',#434042,#434043); +#434042 = CARTESIAN_POINT('',(144.54,-122.55,1.585)); +#434043 = VECTOR('',#434044,1.); +#434044 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#434045 = PLANE('',#434046); +#434046 = AXIS2_PLACEMENT_3D('',#434047,#434048,#434049); +#434047 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434048 = DIRECTION('',(0.,0.,1.)); +#434049 = DIRECTION('',(1.,0.,-0.)); +#434050 = SHELL_BASED_SURFACE_MODEL('',(#434051)); +#434051 = OPEN_SHELL('',(#434052)); +#434052 = ADVANCED_FACE('',(#434053),#434217,.T.); +#434053 = FACE_BOUND('',#434054,.F.); +#434054 = EDGE_LOOP('',(#434055,#434065,#434073,#434081,#434089,#434097, + #434105,#434113,#434121,#434130,#434138,#434146,#434154,#434162, + #434170,#434179,#434187,#434195,#434203,#434211)); +#434055 = ORIENTED_EDGE('',*,*,#434056,.T.); +#434056 = EDGE_CURVE('',#434057,#434059,#434061,.T.); +#434057 = VERTEX_POINT('',#434058); +#434058 = CARTESIAN_POINT('',(125.227039,-118.044567,1.585)); +#434059 = VERTEX_POINT('',#434060); +#434060 = CARTESIAN_POINT('',(125.25,-118.04,1.585)); +#434061 = LINE('',#434062,#434063); +#434062 = CARTESIAN_POINT('',(125.227039,-118.044567,1.585)); +#434063 = VECTOR('',#434064,1.); +#434064 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#434065 = ORIENTED_EDGE('',*,*,#434066,.T.); +#434066 = EDGE_CURVE('',#434059,#434067,#434069,.T.); +#434067 = VERTEX_POINT('',#434068); +#434068 = CARTESIAN_POINT('',(129.25,-118.04,1.585)); +#434069 = LINE('',#434070,#434071); +#434070 = CARTESIAN_POINT('',(125.25,-118.04,1.585)); +#434071 = VECTOR('',#434072,1.); +#434072 = DIRECTION('',(1.,0.,0.)); +#434073 = ORIENTED_EDGE('',*,*,#434074,.T.); +#434074 = EDGE_CURVE('',#434067,#434075,#434077,.T.); +#434075 = VERTEX_POINT('',#434076); +#434076 = CARTESIAN_POINT('',(129.272961,-118.044567,1.585)); +#434077 = LINE('',#434078,#434079); +#434078 = CARTESIAN_POINT('',(129.25,-118.04,1.585)); +#434079 = VECTOR('',#434080,1.); +#434080 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#434081 = ORIENTED_EDGE('',*,*,#434082,.T.); +#434082 = EDGE_CURVE('',#434075,#434083,#434085,.T.); +#434083 = VERTEX_POINT('',#434084); +#434084 = CARTESIAN_POINT('',(129.292426,-118.057574,1.585)); +#434085 = LINE('',#434086,#434087); +#434086 = CARTESIAN_POINT('',(129.272961,-118.044567,1.585)); +#434087 = VECTOR('',#434088,1.); +#434088 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#434089 = ORIENTED_EDGE('',*,*,#434090,.T.); +#434090 = EDGE_CURVE('',#434083,#434091,#434093,.T.); +#434091 = VERTEX_POINT('',#434092); +#434092 = CARTESIAN_POINT('',(130.442427,-119.207574,1.585)); +#434093 = LINE('',#434094,#434095); +#434094 = CARTESIAN_POINT('',(129.292426,-118.057574,1.585)); +#434095 = VECTOR('',#434096,1.); +#434096 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#434097 = ORIENTED_EDGE('',*,*,#434098,.T.); +#434098 = EDGE_CURVE('',#434091,#434099,#434101,.T.); +#434099 = VERTEX_POINT('',#434100); +#434100 = CARTESIAN_POINT('',(130.455433,-119.227039,1.585)); +#434101 = LINE('',#434102,#434103); +#434102 = CARTESIAN_POINT('',(130.442427,-119.207574,1.585)); +#434103 = VECTOR('',#434104,1.); +#434104 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#434105 = ORIENTED_EDGE('',*,*,#434106,.T.); +#434106 = EDGE_CURVE('',#434099,#434107,#434109,.T.); +#434107 = VERTEX_POINT('',#434108); +#434108 = CARTESIAN_POINT('',(130.46,-119.25,1.585)); +#434109 = LINE('',#434110,#434111); +#434110 = CARTESIAN_POINT('',(130.455433,-119.227039,1.585)); +#434111 = VECTOR('',#434112,1.); +#434112 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#434113 = ORIENTED_EDGE('',*,*,#434114,.T.); +#434114 = EDGE_CURVE('',#434107,#434115,#434117,.T.); +#434115 = VERTEX_POINT('',#434116); +#434116 = CARTESIAN_POINT('',(130.46,-119.95,1.585)); +#434117 = LINE('',#434118,#434119); +#434118 = CARTESIAN_POINT('',(130.46,-119.25,1.585)); +#434119 = VECTOR('',#434120,1.); +#434120 = DIRECTION('',(0.,-1.,0.)); +#434121 = ORIENTED_EDGE('',*,*,#434122,.T.); +#434122 = EDGE_CURVE('',#434115,#434123,#434125,.T.); +#434123 = VERTEX_POINT('',#434124); +#434124 = CARTESIAN_POINT('',(130.34,-119.95,1.585)); +#434125 = CIRCLE('',#434126,6.000000000042E-02); +#434126 = AXIS2_PLACEMENT_3D('',#434127,#434128,#434129); +#434127 = CARTESIAN_POINT('',(130.4,-119.9500002255,1.585)); +#434128 = DIRECTION('',(0.,0.,-1.)); +#434129 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#434130 = ORIENTED_EDGE('',*,*,#434131,.T.); +#434131 = EDGE_CURVE('',#434123,#434132,#434134,.T.); +#434132 = VERTEX_POINT('',#434133); +#434133 = CARTESIAN_POINT('',(130.34,-119.274852,1.585)); +#434134 = LINE('',#434135,#434136); +#434135 = CARTESIAN_POINT('',(130.34,-119.95,1.585)); +#434136 = VECTOR('',#434137,1.); +#434137 = DIRECTION('',(0.,1.,0.)); +#434138 = ORIENTED_EDGE('',*,*,#434139,.T.); +#434139 = EDGE_CURVE('',#434132,#434140,#434142,.T.); +#434140 = VERTEX_POINT('',#434141); +#434141 = CARTESIAN_POINT('',(129.225148,-118.16,1.585)); +#434142 = LINE('',#434143,#434144); +#434143 = CARTESIAN_POINT('',(130.34,-119.274852,1.585)); +#434144 = VECTOR('',#434145,1.); +#434145 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#434146 = ORIENTED_EDGE('',*,*,#434147,.T.); +#434147 = EDGE_CURVE('',#434140,#434148,#434150,.T.); +#434148 = VERTEX_POINT('',#434149); +#434149 = CARTESIAN_POINT('',(125.275141,-118.16,1.585)); +#434150 = LINE('',#434151,#434152); +#434151 = CARTESIAN_POINT('',(129.225148,-118.16,1.585)); +#434152 = VECTOR('',#434153,1.); +#434153 = DIRECTION('',(-1.,0.,0.)); +#434154 = ORIENTED_EDGE('',*,*,#434155,.T.); +#434155 = EDGE_CURVE('',#434148,#434156,#434158,.T.); +#434156 = VERTEX_POINT('',#434157); +#434157 = CARTESIAN_POINT('',(124.16,-119.293565,1.585)); +#434158 = LINE('',#434159,#434160); +#434159 = CARTESIAN_POINT('',(125.275141,-118.16,1.585)); +#434160 = VECTOR('',#434161,1.); +#434161 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#434162 = ORIENTED_EDGE('',*,*,#434163,.T.); +#434163 = EDGE_CURVE('',#434156,#434164,#434166,.T.); +#434164 = VERTEX_POINT('',#434165); +#434165 = CARTESIAN_POINT('',(124.16,-119.95,1.585)); +#434166 = LINE('',#434167,#434168); +#434167 = CARTESIAN_POINT('',(124.16,-119.293565,1.585)); +#434168 = VECTOR('',#434169,1.); +#434169 = DIRECTION('',(0.,-1.,0.)); +#434170 = ORIENTED_EDGE('',*,*,#434171,.T.); +#434171 = EDGE_CURVE('',#434164,#434172,#434174,.T.); +#434172 = VERTEX_POINT('',#434173); +#434173 = CARTESIAN_POINT('',(124.04,-119.95,1.585)); +#434174 = CIRCLE('',#434175,6.000000000042E-02); +#434175 = AXIS2_PLACEMENT_3D('',#434176,#434177,#434178); +#434176 = CARTESIAN_POINT('',(124.1,-119.9500002255,1.585)); +#434177 = DIRECTION('',(0.,0.,-1.)); +#434178 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#434179 = ORIENTED_EDGE('',*,*,#434180,.T.); +#434180 = EDGE_CURVE('',#434172,#434181,#434183,.T.); +#434181 = VERTEX_POINT('',#434182); +#434182 = CARTESIAN_POINT('',(124.04,-119.269,1.585)); +#434183 = LINE('',#434184,#434185); +#434184 = CARTESIAN_POINT('',(124.04,-119.95,1.585)); +#434185 = VECTOR('',#434186,1.); +#434186 = DIRECTION('',(0.,1.,0.)); +#434187 = ORIENTED_EDGE('',*,*,#434188,.T.); +#434188 = EDGE_CURVE('',#434181,#434189,#434191,.T.); +#434189 = VERTEX_POINT('',#434190); +#434190 = CARTESIAN_POINT('',(124.044894,-119.245711,1.585)); +#434191 = LINE('',#434192,#434193); +#434192 = CARTESIAN_POINT('',(124.04,-119.269,1.585)); +#434193 = VECTOR('',#434194,1.); +#434194 = DIRECTION('',(0.20565044691,0.978625512485,0.)); +#434195 = ORIENTED_EDGE('',*,*,#434196,.T.); +#434196 = EDGE_CURVE('',#434189,#434197,#434199,.T.); +#434197 = VERTEX_POINT('',#434198); +#434198 = CARTESIAN_POINT('',(124.057227,-119.226923,1.585)); +#434199 = LINE('',#434200,#434201); +#434200 = CARTESIAN_POINT('',(124.044894,-119.245711,1.585)); +#434201 = VECTOR('',#434202,1.); +#434202 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#434203 = ORIENTED_EDGE('',*,*,#434204,.T.); +#434204 = EDGE_CURVE('',#434197,#434205,#434207,.T.); +#434205 = VERTEX_POINT('',#434206); +#434206 = CARTESIAN_POINT('',(125.207228,-118.057922,1.585)); +#434207 = LINE('',#434208,#434209); +#434208 = CARTESIAN_POINT('',(124.057227,-119.226923,1.585)); +#434209 = VECTOR('',#434210,1.); +#434210 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#434211 = ORIENTED_EDGE('',*,*,#434212,.T.); +#434212 = EDGE_CURVE('',#434205,#434057,#434213,.T.); +#434213 = LINE('',#434214,#434215); +#434214 = CARTESIAN_POINT('',(125.207228,-118.057922,1.585)); +#434215 = VECTOR('',#434216,1.); +#434216 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#434217 = PLANE('',#434218); +#434218 = AXIS2_PLACEMENT_3D('',#434219,#434220,#434221); +#434219 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434220 = DIRECTION('',(0.,0.,1.)); +#434221 = DIRECTION('',(1.,0.,-0.)); +#434222 = SHELL_BASED_SURFACE_MODEL('',(#434223)); +#434223 = OPEN_SHELL('',(#434224)); +#434224 = ADVANCED_FACE('',(#434225),#434389,.T.); +#434225 = FACE_BOUND('',#434226,.F.); +#434226 = EDGE_LOOP('',(#434227,#434237,#434245,#434253,#434261,#434269, + #434277,#434285,#434293,#434302,#434310,#434318,#434326,#434334, + #434342,#434351,#434359,#434367,#434375,#434383)); +#434227 = ORIENTED_EDGE('',*,*,#434228,.T.); +#434228 = EDGE_CURVE('',#434229,#434231,#434233,.T.); +#434229 = VERTEX_POINT('',#434230); +#434230 = CARTESIAN_POINT('',(135.477039,-118.044567,1.585)); +#434231 = VERTEX_POINT('',#434232); +#434232 = CARTESIAN_POINT('',(135.5,-118.04,1.585)); +#434233 = LINE('',#434234,#434235); +#434234 = CARTESIAN_POINT('',(135.477039,-118.044567,1.585)); +#434235 = VECTOR('',#434236,1.); +#434236 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#434237 = ORIENTED_EDGE('',*,*,#434238,.T.); +#434238 = EDGE_CURVE('',#434231,#434239,#434241,.T.); +#434239 = VERTEX_POINT('',#434240); +#434240 = CARTESIAN_POINT('',(139.5,-118.04,1.585)); +#434241 = LINE('',#434242,#434243); +#434242 = CARTESIAN_POINT('',(135.5,-118.04,1.585)); +#434243 = VECTOR('',#434244,1.); +#434244 = DIRECTION('',(1.,0.,0.)); +#434245 = ORIENTED_EDGE('',*,*,#434246,.T.); +#434246 = EDGE_CURVE('',#434239,#434247,#434249,.T.); +#434247 = VERTEX_POINT('',#434248); +#434248 = CARTESIAN_POINT('',(139.522961,-118.044567,1.585)); +#434249 = LINE('',#434250,#434251); +#434250 = CARTESIAN_POINT('',(139.5,-118.04,1.585)); +#434251 = VECTOR('',#434252,1.); +#434252 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#434253 = ORIENTED_EDGE('',*,*,#434254,.T.); +#434254 = EDGE_CURVE('',#434247,#434255,#434257,.T.); +#434255 = VERTEX_POINT('',#434256); +#434256 = CARTESIAN_POINT('',(139.542426,-118.057574,1.585)); +#434257 = LINE('',#434258,#434259); +#434258 = CARTESIAN_POINT('',(139.522961,-118.044567,1.585)); +#434259 = VECTOR('',#434260,1.); +#434260 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#434261 = ORIENTED_EDGE('',*,*,#434262,.T.); +#434262 = EDGE_CURVE('',#434255,#434263,#434265,.T.); +#434263 = VERTEX_POINT('',#434264); +#434264 = CARTESIAN_POINT('',(140.692427,-119.207574,1.585)); +#434265 = LINE('',#434266,#434267); +#434266 = CARTESIAN_POINT('',(139.542426,-118.057574,1.585)); +#434267 = VECTOR('',#434268,1.); +#434268 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#434269 = ORIENTED_EDGE('',*,*,#434270,.T.); +#434270 = EDGE_CURVE('',#434263,#434271,#434273,.T.); +#434271 = VERTEX_POINT('',#434272); +#434272 = CARTESIAN_POINT('',(140.705433,-119.227039,1.585)); +#434273 = LINE('',#434274,#434275); +#434274 = CARTESIAN_POINT('',(140.692427,-119.207574,1.585)); +#434275 = VECTOR('',#434276,1.); +#434276 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#434277 = ORIENTED_EDGE('',*,*,#434278,.T.); +#434278 = EDGE_CURVE('',#434271,#434279,#434281,.T.); +#434279 = VERTEX_POINT('',#434280); +#434280 = CARTESIAN_POINT('',(140.71,-119.25,1.585)); +#434281 = LINE('',#434282,#434283); +#434282 = CARTESIAN_POINT('',(140.705433,-119.227039,1.585)); +#434283 = VECTOR('',#434284,1.); +#434284 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#434285 = ORIENTED_EDGE('',*,*,#434286,.T.); +#434286 = EDGE_CURVE('',#434279,#434287,#434289,.T.); +#434287 = VERTEX_POINT('',#434288); +#434288 = CARTESIAN_POINT('',(140.71,-119.95,1.585)); +#434289 = LINE('',#434290,#434291); +#434290 = CARTESIAN_POINT('',(140.71,-119.25,1.585)); +#434291 = VECTOR('',#434292,1.); +#434292 = DIRECTION('',(0.,-1.,0.)); +#434293 = ORIENTED_EDGE('',*,*,#434294,.T.); +#434294 = EDGE_CURVE('',#434287,#434295,#434297,.T.); +#434295 = VERTEX_POINT('',#434296); +#434296 = CARTESIAN_POINT('',(140.59,-119.95,1.585)); +#434297 = CIRCLE('',#434298,6.000000000042E-02); +#434298 = AXIS2_PLACEMENT_3D('',#434299,#434300,#434301); +#434299 = CARTESIAN_POINT('',(140.65,-119.9500002255,1.585)); +#434300 = DIRECTION('',(0.,0.,-1.)); +#434301 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#434302 = ORIENTED_EDGE('',*,*,#434303,.T.); +#434303 = EDGE_CURVE('',#434295,#434304,#434306,.T.); +#434304 = VERTEX_POINT('',#434305); +#434305 = CARTESIAN_POINT('',(140.59,-119.274852,1.585)); +#434306 = LINE('',#434307,#434308); +#434307 = CARTESIAN_POINT('',(140.59,-119.95,1.585)); +#434308 = VECTOR('',#434309,1.); +#434309 = DIRECTION('',(0.,1.,0.)); +#434310 = ORIENTED_EDGE('',*,*,#434311,.T.); +#434311 = EDGE_CURVE('',#434304,#434312,#434314,.T.); +#434312 = VERTEX_POINT('',#434313); +#434313 = CARTESIAN_POINT('',(139.475148,-118.16,1.585)); +#434314 = LINE('',#434315,#434316); +#434315 = CARTESIAN_POINT('',(140.59,-119.274852,1.585)); +#434316 = VECTOR('',#434317,1.); +#434317 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#434318 = ORIENTED_EDGE('',*,*,#434319,.T.); +#434319 = EDGE_CURVE('',#434312,#434320,#434322,.T.); +#434320 = VERTEX_POINT('',#434321); +#434321 = CARTESIAN_POINT('',(135.525141,-118.16,1.585)); +#434322 = LINE('',#434323,#434324); +#434323 = CARTESIAN_POINT('',(139.475148,-118.16,1.585)); +#434324 = VECTOR('',#434325,1.); +#434325 = DIRECTION('',(-1.,0.,0.)); +#434326 = ORIENTED_EDGE('',*,*,#434327,.T.); +#434327 = EDGE_CURVE('',#434320,#434328,#434330,.T.); +#434328 = VERTEX_POINT('',#434329); +#434329 = CARTESIAN_POINT('',(134.41,-119.293565,1.585)); +#434330 = LINE('',#434331,#434332); +#434331 = CARTESIAN_POINT('',(135.525141,-118.16,1.585)); +#434332 = VECTOR('',#434333,1.); +#434333 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#434334 = ORIENTED_EDGE('',*,*,#434335,.T.); +#434335 = EDGE_CURVE('',#434328,#434336,#434338,.T.); +#434336 = VERTEX_POINT('',#434337); +#434337 = CARTESIAN_POINT('',(134.41,-119.95,1.585)); +#434338 = LINE('',#434339,#434340); +#434339 = CARTESIAN_POINT('',(134.41,-119.293565,1.585)); +#434340 = VECTOR('',#434341,1.); +#434341 = DIRECTION('',(0.,-1.,0.)); +#434342 = ORIENTED_EDGE('',*,*,#434343,.T.); +#434343 = EDGE_CURVE('',#434336,#434344,#434346,.T.); +#434344 = VERTEX_POINT('',#434345); +#434345 = CARTESIAN_POINT('',(134.29,-119.95,1.585)); +#434346 = CIRCLE('',#434347,6.000000000043E-02); +#434347 = AXIS2_PLACEMENT_3D('',#434348,#434349,#434350); +#434348 = CARTESIAN_POINT('',(134.35,-119.9500002255,1.585)); +#434349 = DIRECTION('',(0.,0.,-1.)); +#434350 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#434351 = ORIENTED_EDGE('',*,*,#434352,.T.); +#434352 = EDGE_CURVE('',#434344,#434353,#434355,.T.); +#434353 = VERTEX_POINT('',#434354); +#434354 = CARTESIAN_POINT('',(134.29,-119.269,1.585)); +#434355 = LINE('',#434356,#434357); +#434356 = CARTESIAN_POINT('',(134.29,-119.95,1.585)); +#434357 = VECTOR('',#434358,1.); +#434358 = DIRECTION('',(0.,1.,0.)); +#434359 = ORIENTED_EDGE('',*,*,#434360,.T.); +#434360 = EDGE_CURVE('',#434353,#434361,#434363,.T.); +#434361 = VERTEX_POINT('',#434362); +#434362 = CARTESIAN_POINT('',(134.294894,-119.245711,1.585)); +#434363 = LINE('',#434364,#434365); +#434364 = CARTESIAN_POINT('',(134.29,-119.269,1.585)); +#434365 = VECTOR('',#434366,1.); +#434366 = DIRECTION('',(0.205650446911,0.978625512484,0.)); +#434367 = ORIENTED_EDGE('',*,*,#434368,.T.); +#434368 = EDGE_CURVE('',#434361,#434369,#434371,.T.); +#434369 = VERTEX_POINT('',#434370); +#434370 = CARTESIAN_POINT('',(134.307227,-119.226923,1.585)); +#434371 = LINE('',#434372,#434373); +#434372 = CARTESIAN_POINT('',(134.294894,-119.245711,1.585)); +#434373 = VECTOR('',#434374,1.); +#434374 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#434375 = ORIENTED_EDGE('',*,*,#434376,.T.); +#434376 = EDGE_CURVE('',#434369,#434377,#434379,.T.); +#434377 = VERTEX_POINT('',#434378); +#434378 = CARTESIAN_POINT('',(135.457228,-118.057922,1.585)); +#434379 = LINE('',#434380,#434381); +#434380 = CARTESIAN_POINT('',(134.307227,-119.226923,1.585)); +#434381 = VECTOR('',#434382,1.); +#434382 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#434383 = ORIENTED_EDGE('',*,*,#434384,.T.); +#434384 = EDGE_CURVE('',#434377,#434229,#434385,.T.); +#434385 = LINE('',#434386,#434387); +#434386 = CARTESIAN_POINT('',(135.457228,-118.057922,1.585)); +#434387 = VECTOR('',#434388,1.); +#434388 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#434389 = PLANE('',#434390); +#434390 = AXIS2_PLACEMENT_3D('',#434391,#434392,#434393); +#434391 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434392 = DIRECTION('',(0.,0.,1.)); +#434393 = DIRECTION('',(1.,0.,-0.)); +#434394 = SHELL_BASED_SURFACE_MODEL('',(#434395)); +#434395 = OPEN_SHELL('',(#434396)); +#434396 = ADVANCED_FACE('',(#434397),#434561,.T.); +#434397 = FACE_BOUND('',#434398,.F.); +#434398 = EDGE_LOOP('',(#434399,#434409,#434417,#434425,#434433,#434441, + #434449,#434457,#434465,#434474,#434482,#434490,#434498,#434506, + #434514,#434523,#434531,#434539,#434547,#434555)); +#434399 = ORIENTED_EDGE('',*,*,#434400,.T.); +#434400 = EDGE_CURVE('',#434401,#434403,#434405,.T.); +#434401 = VERTEX_POINT('',#434402); +#434402 = CARTESIAN_POINT('',(145.727039,-118.044567,1.585)); +#434403 = VERTEX_POINT('',#434404); +#434404 = CARTESIAN_POINT('',(145.75,-118.04,1.585)); +#434405 = LINE('',#434406,#434407); +#434406 = CARTESIAN_POINT('',(145.727039,-118.044567,1.585)); +#434407 = VECTOR('',#434408,1.); +#434408 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#434409 = ORIENTED_EDGE('',*,*,#434410,.T.); +#434410 = EDGE_CURVE('',#434403,#434411,#434413,.T.); +#434411 = VERTEX_POINT('',#434412); +#434412 = CARTESIAN_POINT('',(149.75,-118.04,1.585)); +#434413 = LINE('',#434414,#434415); +#434414 = CARTESIAN_POINT('',(145.75,-118.04,1.585)); +#434415 = VECTOR('',#434416,1.); +#434416 = DIRECTION('',(1.,0.,0.)); +#434417 = ORIENTED_EDGE('',*,*,#434418,.T.); +#434418 = EDGE_CURVE('',#434411,#434419,#434421,.T.); +#434419 = VERTEX_POINT('',#434420); +#434420 = CARTESIAN_POINT('',(149.772961,-118.044567,1.585)); +#434421 = LINE('',#434422,#434423); +#434422 = CARTESIAN_POINT('',(149.75,-118.04,1.585)); +#434423 = VECTOR('',#434424,1.); +#434424 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#434425 = ORIENTED_EDGE('',*,*,#434426,.T.); +#434426 = EDGE_CURVE('',#434419,#434427,#434429,.T.); +#434427 = VERTEX_POINT('',#434428); +#434428 = CARTESIAN_POINT('',(149.792426,-118.057574,1.585)); +#434429 = LINE('',#434430,#434431); +#434430 = CARTESIAN_POINT('',(149.772961,-118.044567,1.585)); +#434431 = VECTOR('',#434432,1.); +#434432 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#434433 = ORIENTED_EDGE('',*,*,#434434,.T.); +#434434 = EDGE_CURVE('',#434427,#434435,#434437,.T.); +#434435 = VERTEX_POINT('',#434436); +#434436 = CARTESIAN_POINT('',(150.942427,-119.207574,1.585)); +#434437 = LINE('',#434438,#434439); +#434438 = CARTESIAN_POINT('',(149.792426,-118.057574,1.585)); +#434439 = VECTOR('',#434440,1.); +#434440 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#434441 = ORIENTED_EDGE('',*,*,#434442,.T.); +#434442 = EDGE_CURVE('',#434435,#434443,#434445,.T.); +#434443 = VERTEX_POINT('',#434444); +#434444 = CARTESIAN_POINT('',(150.955433,-119.227039,1.585)); +#434445 = LINE('',#434446,#434447); +#434446 = CARTESIAN_POINT('',(150.942427,-119.207574,1.585)); +#434447 = VECTOR('',#434448,1.); +#434448 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#434449 = ORIENTED_EDGE('',*,*,#434450,.T.); +#434450 = EDGE_CURVE('',#434443,#434451,#434453,.T.); +#434451 = VERTEX_POINT('',#434452); +#434452 = CARTESIAN_POINT('',(150.96,-119.25,1.585)); +#434453 = LINE('',#434454,#434455); +#434454 = CARTESIAN_POINT('',(150.955433,-119.227039,1.585)); +#434455 = VECTOR('',#434456,1.); +#434456 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#434457 = ORIENTED_EDGE('',*,*,#434458,.T.); +#434458 = EDGE_CURVE('',#434451,#434459,#434461,.T.); +#434459 = VERTEX_POINT('',#434460); +#434460 = CARTESIAN_POINT('',(150.96,-119.95,1.585)); +#434461 = LINE('',#434462,#434463); +#434462 = CARTESIAN_POINT('',(150.96,-119.25,1.585)); +#434463 = VECTOR('',#434464,1.); +#434464 = DIRECTION('',(0.,-1.,0.)); +#434465 = ORIENTED_EDGE('',*,*,#434466,.T.); +#434466 = EDGE_CURVE('',#434459,#434467,#434469,.T.); +#434467 = VERTEX_POINT('',#434468); +#434468 = CARTESIAN_POINT('',(150.84,-119.95,1.585)); +#434469 = CIRCLE('',#434470,6.000000000042E-02); +#434470 = AXIS2_PLACEMENT_3D('',#434471,#434472,#434473); +#434471 = CARTESIAN_POINT('',(150.9,-119.9500002255,1.585)); +#434472 = DIRECTION('',(0.,0.,-1.)); +#434473 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#434474 = ORIENTED_EDGE('',*,*,#434475,.T.); +#434475 = EDGE_CURVE('',#434467,#434476,#434478,.T.); +#434476 = VERTEX_POINT('',#434477); +#434477 = CARTESIAN_POINT('',(150.84,-119.274852,1.585)); +#434478 = LINE('',#434479,#434480); +#434479 = CARTESIAN_POINT('',(150.84,-119.95,1.585)); +#434480 = VECTOR('',#434481,1.); +#434481 = DIRECTION('',(0.,1.,0.)); +#434482 = ORIENTED_EDGE('',*,*,#434483,.T.); +#434483 = EDGE_CURVE('',#434476,#434484,#434486,.T.); +#434484 = VERTEX_POINT('',#434485); +#434485 = CARTESIAN_POINT('',(149.725148,-118.16,1.585)); +#434486 = LINE('',#434487,#434488); +#434487 = CARTESIAN_POINT('',(150.84,-119.274852,1.585)); +#434488 = VECTOR('',#434489,1.); +#434489 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#434490 = ORIENTED_EDGE('',*,*,#434491,.T.); +#434491 = EDGE_CURVE('',#434484,#434492,#434494,.T.); +#434492 = VERTEX_POINT('',#434493); +#434493 = CARTESIAN_POINT('',(145.775141,-118.16,1.585)); +#434494 = LINE('',#434495,#434496); +#434495 = CARTESIAN_POINT('',(149.725148,-118.16,1.585)); +#434496 = VECTOR('',#434497,1.); +#434497 = DIRECTION('',(-1.,0.,0.)); +#434498 = ORIENTED_EDGE('',*,*,#434499,.T.); +#434499 = EDGE_CURVE('',#434492,#434500,#434502,.T.); +#434500 = VERTEX_POINT('',#434501); +#434501 = CARTESIAN_POINT('',(144.66,-119.293565,1.585)); +#434502 = LINE('',#434503,#434504); +#434503 = CARTESIAN_POINT('',(145.775141,-118.16,1.585)); +#434504 = VECTOR('',#434505,1.); +#434505 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#434506 = ORIENTED_EDGE('',*,*,#434507,.T.); +#434507 = EDGE_CURVE('',#434500,#434508,#434510,.T.); +#434508 = VERTEX_POINT('',#434509); +#434509 = CARTESIAN_POINT('',(144.66,-119.95,1.585)); +#434510 = LINE('',#434511,#434512); +#434511 = CARTESIAN_POINT('',(144.66,-119.293565,1.585)); +#434512 = VECTOR('',#434513,1.); +#434513 = DIRECTION('',(0.,-1.,0.)); +#434514 = ORIENTED_EDGE('',*,*,#434515,.T.); +#434515 = EDGE_CURVE('',#434508,#434516,#434518,.T.); +#434516 = VERTEX_POINT('',#434517); +#434517 = CARTESIAN_POINT('',(144.54,-119.95,1.585)); +#434518 = CIRCLE('',#434519,6.000000000043E-02); +#434519 = AXIS2_PLACEMENT_3D('',#434520,#434521,#434522); +#434520 = CARTESIAN_POINT('',(144.6,-119.9500002255,1.585)); +#434521 = DIRECTION('',(0.,0.,-1.)); +#434522 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#434523 = ORIENTED_EDGE('',*,*,#434524,.T.); +#434524 = EDGE_CURVE('',#434516,#434525,#434527,.T.); +#434525 = VERTEX_POINT('',#434526); +#434526 = CARTESIAN_POINT('',(144.54,-119.269,1.585)); +#434527 = LINE('',#434528,#434529); +#434528 = CARTESIAN_POINT('',(144.54,-119.95,1.585)); +#434529 = VECTOR('',#434530,1.); +#434530 = DIRECTION('',(0.,1.,0.)); +#434531 = ORIENTED_EDGE('',*,*,#434532,.T.); +#434532 = EDGE_CURVE('',#434525,#434533,#434535,.T.); +#434533 = VERTEX_POINT('',#434534); +#434534 = CARTESIAN_POINT('',(144.544894,-119.245711,1.585)); +#434535 = LINE('',#434536,#434537); +#434536 = CARTESIAN_POINT('',(144.54,-119.269,1.585)); +#434537 = VECTOR('',#434538,1.); +#434538 = DIRECTION('',(0.205650446911,0.978625512484,0.)); +#434539 = ORIENTED_EDGE('',*,*,#434540,.T.); +#434540 = EDGE_CURVE('',#434533,#434541,#434543,.T.); +#434541 = VERTEX_POINT('',#434542); +#434542 = CARTESIAN_POINT('',(144.557227,-119.226923,1.585)); +#434543 = LINE('',#434544,#434545); +#434544 = CARTESIAN_POINT('',(144.544894,-119.245711,1.585)); +#434545 = VECTOR('',#434546,1.); +#434546 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#434547 = ORIENTED_EDGE('',*,*,#434548,.T.); +#434548 = EDGE_CURVE('',#434541,#434549,#434551,.T.); +#434549 = VERTEX_POINT('',#434550); +#434550 = CARTESIAN_POINT('',(145.707228,-118.057922,1.585)); +#434551 = LINE('',#434552,#434553); +#434552 = CARTESIAN_POINT('',(144.557227,-119.226923,1.585)); +#434553 = VECTOR('',#434554,1.); +#434554 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#434555 = ORIENTED_EDGE('',*,*,#434556,.T.); +#434556 = EDGE_CURVE('',#434549,#434401,#434557,.T.); +#434557 = LINE('',#434558,#434559); +#434558 = CARTESIAN_POINT('',(145.707228,-118.057922,1.585)); +#434559 = VECTOR('',#434560,1.); +#434560 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#434561 = PLANE('',#434562); +#434562 = AXIS2_PLACEMENT_3D('',#434563,#434564,#434565); +#434563 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434564 = DIRECTION('',(0.,0.,1.)); +#434565 = DIRECTION('',(1.,0.,-0.)); +#434566 = SHELL_BASED_SURFACE_MODEL('',(#434567)); +#434567 = OPEN_SHELL('',(#434568)); +#434568 = ADVANCED_FACE('',(#434569),#434743,.T.); +#434569 = FACE_BOUND('',#434570,.F.); +#434570 = EDGE_LOOP('',(#434571,#434582,#434590,#434598,#434607,#434615, + #434623,#434631,#434639,#434647,#434656,#434664,#434672,#434680, + #434688,#434696,#434704,#434713,#434721,#434729,#434737)); +#434571 = ORIENTED_EDGE('',*,*,#434572,.T.); +#434572 = EDGE_CURVE('',#434573,#434575,#434577,.T.); +#434573 = VERTEX_POINT('',#434574); +#434574 = CARTESIAN_POINT('',(126.015474,-116.592459,1.585)); +#434575 = VERTEX_POINT('',#434576); +#434576 = CARTESIAN_POINT('',(126.132142,-116.654819,1.585)); +#434577 = CIRCLE('',#434578,7.500000000003E-02); +#434578 = AXIS2_PLACEMENT_3D('',#434579,#434580,#434581); +#434579 = CARTESIAN_POINT('',(126.057142,-116.6548190655,1.585)); +#434580 = DIRECTION('',(0.,0.,-1.)); +#434581 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#434582 = ORIENTED_EDGE('',*,*,#434583,.T.); +#434583 = EDGE_CURVE('',#434575,#434584,#434586,.T.); +#434584 = VERTEX_POINT('',#434585); +#434585 = CARTESIAN_POINT('',(126.132142,-116.913152,1.585)); +#434586 = LINE('',#434587,#434588); +#434587 = CARTESIAN_POINT('',(126.132142,-116.654819,1.585)); +#434588 = VECTOR('',#434589,1.); +#434589 = DIRECTION('',(0.,-1.,0.)); +#434590 = ORIENTED_EDGE('',*,*,#434591,.T.); +#434591 = EDGE_CURVE('',#434584,#434592,#434594,.T.); +#434592 = VERTEX_POINT('',#434593); +#434593 = CARTESIAN_POINT('',(126.309869,-116.914593,1.585)); +#434594 = LINE('',#434595,#434596); +#434595 = CARTESIAN_POINT('',(126.132142,-116.913152,1.585)); +#434596 = VECTOR('',#434597,1.); +#434597 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#434598 = ORIENTED_EDGE('',*,*,#434599,.T.); +#434599 = EDGE_CURVE('',#434592,#434600,#434602,.T.); +#434600 = VERTEX_POINT('',#434601); +#434601 = CARTESIAN_POINT('',(126.295237,-117.063152,1.585)); +#434602 = CIRCLE('',#434603,7.500006711464E-02); +#434603 = AXIS2_PLACEMENT_3D('',#434604,#434605,#434606); +#434604 = CARTESIAN_POINT('',(126.29523706711,-116.9881519328,1.585)); +#434605 = DIRECTION('',(0.,0.,-1.)); +#434606 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#434607 = ORIENTED_EDGE('',*,*,#434608,.T.); +#434608 = EDGE_CURVE('',#434600,#434609,#434611,.T.); +#434609 = VERTEX_POINT('',#434610); +#434610 = CARTESIAN_POINT('',(126.132142,-117.063152,1.585)); +#434611 = LINE('',#434612,#434613); +#434612 = CARTESIAN_POINT('',(126.295237,-117.063152,1.585)); +#434613 = VECTOR('',#434614,1.); +#434614 = DIRECTION('',(-1.,0.,0.)); +#434615 = ORIENTED_EDGE('',*,*,#434616,.T.); +#434616 = EDGE_CURVE('',#434609,#434617,#434619,.T.); +#434617 = VERTEX_POINT('',#434618); +#434618 = CARTESIAN_POINT('',(126.132142,-117.494256,1.585)); +#434619 = LINE('',#434620,#434621); +#434620 = CARTESIAN_POINT('',(126.132142,-117.063152,1.585)); +#434621 = VECTOR('',#434622,1.); +#434622 = DIRECTION('',(0.,-1.,0.)); +#434623 = ORIENTED_EDGE('',*,*,#434624,.T.); +#434624 = EDGE_CURVE('',#434617,#434625,#434627,.T.); +#434625 = VERTEX_POINT('',#434626); +#434626 = CARTESIAN_POINT('',(126.160662,-117.551298,1.585)); +#434627 = LINE('',#434628,#434629); +#434628 = CARTESIAN_POINT('',(126.132142,-117.494256,1.585)); +#434629 = VECTOR('',#434630,1.); +#434630 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#434631 = ORIENTED_EDGE('',*,*,#434632,.T.); +#434632 = EDGE_CURVE('',#434625,#434633,#434635,.T.); +#434633 = VERTEX_POINT('',#434634); +#434634 = CARTESIAN_POINT('',(126.217704,-117.579819,1.585)); +#434635 = LINE('',#434636,#434637); +#434636 = CARTESIAN_POINT('',(126.160662,-117.551298,1.585)); +#434637 = VECTOR('',#434638,1.); +#434638 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#434639 = ORIENTED_EDGE('',*,*,#434640,.T.); +#434640 = EDGE_CURVE('',#434633,#434641,#434643,.T.); +#434641 = VERTEX_POINT('',#434642); +#434642 = CARTESIAN_POINT('',(126.309869,-117.58126,1.585)); +#434643 = LINE('',#434644,#434645); +#434644 = CARTESIAN_POINT('',(126.217704,-117.579819,1.585)); +#434645 = VECTOR('',#434646,1.); +#434646 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#434647 = ORIENTED_EDGE('',*,*,#434648,.T.); +#434648 = EDGE_CURVE('',#434641,#434649,#434651,.T.); +#434649 = VERTEX_POINT('',#434650); +#434650 = CARTESIAN_POINT('',(126.295237,-117.729819,1.585)); +#434651 = CIRCLE('',#434652,7.500006711463E-02); +#434652 = AXIS2_PLACEMENT_3D('',#434653,#434654,#434655); +#434653 = CARTESIAN_POINT('',(126.29523706711,-117.6548189328,1.585)); +#434654 = DIRECTION('',(0.,0.,-1.)); +#434655 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#434656 = ORIENTED_EDGE('',*,*,#434657,.T.); +#434657 = EDGE_CURVE('',#434649,#434658,#434660,.T.); +#434658 = VERTEX_POINT('',#434659); +#434659 = CARTESIAN_POINT('',(126.180189,-117.727156,1.585)); +#434660 = LINE('',#434661,#434662); +#434661 = CARTESIAN_POINT('',(126.295237,-117.729819,1.585)); +#434662 = VECTOR('',#434663,1.); +#434663 = DIRECTION('',(-0.999732219024,2.314066215209E-02,0.)); +#434664 = ORIENTED_EDGE('',*,*,#434665,.T.); +#434665 = EDGE_CURVE('',#434658,#434666,#434668,.T.); +#434666 = VERTEX_POINT('',#434667); +#434667 = CARTESIAN_POINT('',(126.058777,-117.66645,1.585)); +#434668 = LINE('',#434669,#434670); +#434669 = CARTESIAN_POINT('',(126.180189,-117.727156,1.585)); +#434670 = VECTOR('',#434671,1.); +#434671 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#434672 = ORIENTED_EDGE('',*,*,#434673,.T.); +#434673 = EDGE_CURVE('',#434666,#434674,#434676,.T.); +#434674 = VERTEX_POINT('',#434675); +#434675 = CARTESIAN_POINT('',(126.037679,-117.640741,1.585)); +#434676 = LINE('',#434677,#434678); +#434677 = CARTESIAN_POINT('',(126.058777,-117.66645,1.585)); +#434678 = VECTOR('',#434679,1.); +#434679 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#434680 = ORIENTED_EDGE('',*,*,#434681,.T.); +#434681 = EDGE_CURVE('',#434674,#434682,#434684,.T.); +#434682 = VERTEX_POINT('',#434683); +#434683 = CARTESIAN_POINT('',(125.983583,-117.526593,1.585)); +#434684 = LINE('',#434685,#434686); +#434685 = CARTESIAN_POINT('',(126.037679,-117.640741,1.585)); +#434686 = VECTOR('',#434687,1.); +#434687 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#434688 = ORIENTED_EDGE('',*,*,#434689,.T.); +#434689 = EDGE_CURVE('',#434682,#434690,#434692,.T.); +#434690 = VERTEX_POINT('',#434691); +#434691 = CARTESIAN_POINT('',(125.982142,-117.063152,1.585)); +#434692 = LINE('',#434693,#434694); +#434693 = CARTESIAN_POINT('',(125.983583,-117.526593,1.585)); +#434694 = VECTOR('',#434695,1.); +#434695 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#434696 = ORIENTED_EDGE('',*,*,#434697,.T.); +#434697 = EDGE_CURVE('',#434690,#434698,#434700,.T.); +#434698 = VERTEX_POINT('',#434699); +#434699 = CARTESIAN_POINT('',(125.899653,-117.061711,1.585)); +#434700 = LINE('',#434701,#434702); +#434701 = CARTESIAN_POINT('',(125.982142,-117.063152,1.585)); +#434702 = VECTOR('',#434703,1.); +#434703 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#434704 = ORIENTED_EDGE('',*,*,#434705,.T.); +#434705 = EDGE_CURVE('',#434698,#434706,#434708,.T.); +#434706 = VERTEX_POINT('',#434707); +#434707 = CARTESIAN_POINT('',(125.914285,-116.913152,1.585)); +#434708 = CIRCLE('',#434709,7.500006711465E-02); +#434709 = AXIS2_PLACEMENT_3D('',#434710,#434711,#434712); +#434710 = CARTESIAN_POINT('',(125.91428493288,-116.9881520671,1.585)); +#434711 = DIRECTION('',(0.,0.,-1.)); +#434712 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#434713 = ORIENTED_EDGE('',*,*,#434714,.T.); +#434714 = EDGE_CURVE('',#434706,#434715,#434717,.T.); +#434715 = VERTEX_POINT('',#434716); +#434716 = CARTESIAN_POINT('',(125.982142,-116.913152,1.585)); +#434717 = LINE('',#434718,#434719); +#434718 = CARTESIAN_POINT('',(125.914285,-116.913152,1.585)); +#434719 = VECTOR('',#434720,1.); +#434720 = DIRECTION('',(1.,0.,0.)); +#434721 = ORIENTED_EDGE('',*,*,#434722,.T.); +#434722 = EDGE_CURVE('',#434715,#434723,#434725,.T.); +#434723 = VERTEX_POINT('',#434724); +#434724 = CARTESIAN_POINT('',(125.983583,-116.640187,1.585)); +#434725 = LINE('',#434726,#434727); +#434726 = CARTESIAN_POINT('',(125.982142,-116.913152,1.585)); +#434727 = VECTOR('',#434728,1.); +#434728 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#434729 = ORIENTED_EDGE('',*,*,#434730,.T.); +#434730 = EDGE_CURVE('',#434723,#434731,#434733,.T.); +#434731 = VERTEX_POINT('',#434732); +#434732 = CARTESIAN_POINT('',(125.994782,-116.613151,1.585)); +#434733 = LINE('',#434734,#434735); +#434734 = CARTESIAN_POINT('',(125.983583,-116.640187,1.585)); +#434735 = VECTOR('',#434736,1.); +#434736 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#434737 = ORIENTED_EDGE('',*,*,#434738,.T.); +#434738 = EDGE_CURVE('',#434731,#434573,#434739,.T.); +#434739 = LINE('',#434740,#434741); +#434740 = CARTESIAN_POINT('',(125.994782,-116.613151,1.585)); +#434741 = VECTOR('',#434742,1.); +#434742 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#434743 = PLANE('',#434744); +#434744 = AXIS2_PLACEMENT_3D('',#434745,#434746,#434747); +#434745 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434746 = DIRECTION('',(0.,0.,1.)); +#434747 = DIRECTION('',(1.,0.,-0.)); +#434748 = SHELL_BASED_SURFACE_MODEL('',(#434749)); +#434749 = OPEN_SHELL('',(#434750)); +#434750 = ADVANCED_FACE('',(#434751),#434925,.T.); +#434751 = FACE_BOUND('',#434752,.F.); +#434752 = EDGE_LOOP('',(#434753,#434764,#434772,#434780,#434789,#434797, + #434805,#434813,#434821,#434829,#434838,#434846,#434854,#434862, + #434870,#434878,#434886,#434895,#434903,#434911,#434919)); +#434753 = ORIENTED_EDGE('',*,*,#434754,.T.); +#434754 = EDGE_CURVE('',#434755,#434757,#434759,.T.); +#434755 = VERTEX_POINT('',#434756); +#434756 = CARTESIAN_POINT('',(126.586903,-116.592459,1.585)); +#434757 = VERTEX_POINT('',#434758); +#434758 = CARTESIAN_POINT('',(126.703571,-116.654819,1.585)); +#434759 = CIRCLE('',#434760,7.500000000003E-02); +#434760 = AXIS2_PLACEMENT_3D('',#434761,#434762,#434763); +#434761 = CARTESIAN_POINT('',(126.628571,-116.6548190655,1.585)); +#434762 = DIRECTION('',(0.,0.,-1.)); +#434763 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#434764 = ORIENTED_EDGE('',*,*,#434765,.T.); +#434765 = EDGE_CURVE('',#434757,#434766,#434768,.T.); +#434766 = VERTEX_POINT('',#434767); +#434767 = CARTESIAN_POINT('',(126.703571,-116.913152,1.585)); +#434768 = LINE('',#434769,#434770); +#434769 = CARTESIAN_POINT('',(126.703571,-116.654819,1.585)); +#434770 = VECTOR('',#434771,1.); +#434771 = DIRECTION('',(0.,-1.,0.)); +#434772 = ORIENTED_EDGE('',*,*,#434773,.T.); +#434773 = EDGE_CURVE('',#434766,#434774,#434776,.T.); +#434774 = VERTEX_POINT('',#434775); +#434775 = CARTESIAN_POINT('',(126.881298,-116.914593,1.585)); +#434776 = LINE('',#434777,#434778); +#434777 = CARTESIAN_POINT('',(126.703571,-116.913152,1.585)); +#434778 = VECTOR('',#434779,1.); +#434779 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#434780 = ORIENTED_EDGE('',*,*,#434781,.T.); +#434781 = EDGE_CURVE('',#434774,#434782,#434784,.T.); +#434782 = VERTEX_POINT('',#434783); +#434783 = CARTESIAN_POINT('',(126.866666,-117.063152,1.585)); +#434784 = CIRCLE('',#434785,7.500006711464E-02); +#434785 = AXIS2_PLACEMENT_3D('',#434786,#434787,#434788); +#434786 = CARTESIAN_POINT('',(126.86666606711,-116.9881519328,1.585)); +#434787 = DIRECTION('',(0.,0.,-1.)); +#434788 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#434789 = ORIENTED_EDGE('',*,*,#434790,.T.); +#434790 = EDGE_CURVE('',#434782,#434791,#434793,.T.); +#434791 = VERTEX_POINT('',#434792); +#434792 = CARTESIAN_POINT('',(126.703571,-117.063152,1.585)); +#434793 = LINE('',#434794,#434795); +#434794 = CARTESIAN_POINT('',(126.866666,-117.063152,1.585)); +#434795 = VECTOR('',#434796,1.); +#434796 = DIRECTION('',(-1.,0.,0.)); +#434797 = ORIENTED_EDGE('',*,*,#434798,.T.); +#434798 = EDGE_CURVE('',#434791,#434799,#434801,.T.); +#434799 = VERTEX_POINT('',#434800); +#434800 = CARTESIAN_POINT('',(126.703571,-117.494256,1.585)); +#434801 = LINE('',#434802,#434803); +#434802 = CARTESIAN_POINT('',(126.703571,-117.063152,1.585)); +#434803 = VECTOR('',#434804,1.); +#434804 = DIRECTION('',(0.,-1.,0.)); +#434805 = ORIENTED_EDGE('',*,*,#434806,.T.); +#434806 = EDGE_CURVE('',#434799,#434807,#434809,.T.); +#434807 = VERTEX_POINT('',#434808); +#434808 = CARTESIAN_POINT('',(126.732091,-117.551298,1.585)); +#434809 = LINE('',#434810,#434811); +#434810 = CARTESIAN_POINT('',(126.703571,-117.494256,1.585)); +#434811 = VECTOR('',#434812,1.); +#434812 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#434813 = ORIENTED_EDGE('',*,*,#434814,.T.); +#434814 = EDGE_CURVE('',#434807,#434815,#434817,.T.); +#434815 = VERTEX_POINT('',#434816); +#434816 = CARTESIAN_POINT('',(126.789133,-117.579819,1.585)); +#434817 = LINE('',#434818,#434819); +#434818 = CARTESIAN_POINT('',(126.732091,-117.551298,1.585)); +#434819 = VECTOR('',#434820,1.); +#434820 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#434821 = ORIENTED_EDGE('',*,*,#434822,.T.); +#434822 = EDGE_CURVE('',#434815,#434823,#434825,.T.); +#434823 = VERTEX_POINT('',#434824); +#434824 = CARTESIAN_POINT('',(126.881298,-117.58126,1.585)); +#434825 = LINE('',#434826,#434827); +#434826 = CARTESIAN_POINT('',(126.789133,-117.579819,1.585)); +#434827 = VECTOR('',#434828,1.); +#434828 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#434829 = ORIENTED_EDGE('',*,*,#434830,.T.); +#434830 = EDGE_CURVE('',#434823,#434831,#434833,.T.); +#434831 = VERTEX_POINT('',#434832); +#434832 = CARTESIAN_POINT('',(126.866666,-117.729819,1.585)); +#434833 = CIRCLE('',#434834,7.500006711463E-02); +#434834 = AXIS2_PLACEMENT_3D('',#434835,#434836,#434837); +#434835 = CARTESIAN_POINT('',(126.86666606711,-117.6548189328,1.585)); +#434836 = DIRECTION('',(0.,0.,-1.)); +#434837 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#434838 = ORIENTED_EDGE('',*,*,#434839,.T.); +#434839 = EDGE_CURVE('',#434831,#434840,#434842,.T.); +#434840 = VERTEX_POINT('',#434841); +#434841 = CARTESIAN_POINT('',(126.751618,-117.727156,1.585)); +#434842 = LINE('',#434843,#434844); +#434843 = CARTESIAN_POINT('',(126.866666,-117.729819,1.585)); +#434844 = VECTOR('',#434845,1.); +#434845 = DIRECTION('',(-0.999732219024,2.314066215209E-02,0.)); +#434846 = ORIENTED_EDGE('',*,*,#434847,.T.); +#434847 = EDGE_CURVE('',#434840,#434848,#434850,.T.); +#434848 = VERTEX_POINT('',#434849); +#434849 = CARTESIAN_POINT('',(126.630206,-117.66645,1.585)); +#434850 = LINE('',#434851,#434852); +#434851 = CARTESIAN_POINT('',(126.751618,-117.727156,1.585)); +#434852 = VECTOR('',#434853,1.); +#434853 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#434854 = ORIENTED_EDGE('',*,*,#434855,.T.); +#434855 = EDGE_CURVE('',#434848,#434856,#434858,.T.); +#434856 = VERTEX_POINT('',#434857); +#434857 = CARTESIAN_POINT('',(126.609108,-117.640741,1.585)); +#434858 = LINE('',#434859,#434860); +#434859 = CARTESIAN_POINT('',(126.630206,-117.66645,1.585)); +#434860 = VECTOR('',#434861,1.); +#434861 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#434862 = ORIENTED_EDGE('',*,*,#434863,.T.); +#434863 = EDGE_CURVE('',#434856,#434864,#434866,.T.); +#434864 = VERTEX_POINT('',#434865); +#434865 = CARTESIAN_POINT('',(126.555012,-117.526593,1.585)); +#434866 = LINE('',#434867,#434868); +#434867 = CARTESIAN_POINT('',(126.609108,-117.640741,1.585)); +#434868 = VECTOR('',#434869,1.); +#434869 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#434870 = ORIENTED_EDGE('',*,*,#434871,.T.); +#434871 = EDGE_CURVE('',#434864,#434872,#434874,.T.); +#434872 = VERTEX_POINT('',#434873); +#434873 = CARTESIAN_POINT('',(126.553571,-117.063152,1.585)); +#434874 = LINE('',#434875,#434876); +#434875 = CARTESIAN_POINT('',(126.555012,-117.526593,1.585)); +#434876 = VECTOR('',#434877,1.); +#434877 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#434878 = ORIENTED_EDGE('',*,*,#434879,.T.); +#434879 = EDGE_CURVE('',#434872,#434880,#434882,.T.); +#434880 = VERTEX_POINT('',#434881); +#434881 = CARTESIAN_POINT('',(126.471082,-117.061711,1.585)); +#434882 = LINE('',#434883,#434884); +#434883 = CARTESIAN_POINT('',(126.553571,-117.063152,1.585)); +#434884 = VECTOR('',#434885,1.); +#434885 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#434886 = ORIENTED_EDGE('',*,*,#434887,.T.); +#434887 = EDGE_CURVE('',#434880,#434888,#434890,.T.); +#434888 = VERTEX_POINT('',#434889); +#434889 = CARTESIAN_POINT('',(126.485714,-116.913152,1.585)); +#434890 = CIRCLE('',#434891,7.500006711465E-02); +#434891 = AXIS2_PLACEMENT_3D('',#434892,#434893,#434894); +#434892 = CARTESIAN_POINT('',(126.48571393288,-116.9881520671,1.585)); +#434893 = DIRECTION('',(0.,0.,-1.)); +#434894 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#434895 = ORIENTED_EDGE('',*,*,#434896,.T.); +#434896 = EDGE_CURVE('',#434888,#434897,#434899,.T.); +#434897 = VERTEX_POINT('',#434898); +#434898 = CARTESIAN_POINT('',(126.553571,-116.913152,1.585)); +#434899 = LINE('',#434900,#434901); +#434900 = CARTESIAN_POINT('',(126.485714,-116.913152,1.585)); +#434901 = VECTOR('',#434902,1.); +#434902 = DIRECTION('',(1.,0.,0.)); +#434903 = ORIENTED_EDGE('',*,*,#434904,.T.); +#434904 = EDGE_CURVE('',#434897,#434905,#434907,.T.); +#434905 = VERTEX_POINT('',#434906); +#434906 = CARTESIAN_POINT('',(126.555012,-116.640187,1.585)); +#434907 = LINE('',#434908,#434909); +#434908 = CARTESIAN_POINT('',(126.553571,-116.913152,1.585)); +#434909 = VECTOR('',#434910,1.); +#434910 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#434911 = ORIENTED_EDGE('',*,*,#434912,.T.); +#434912 = EDGE_CURVE('',#434905,#434913,#434915,.T.); +#434913 = VERTEX_POINT('',#434914); +#434914 = CARTESIAN_POINT('',(126.566211,-116.613151,1.585)); +#434915 = LINE('',#434916,#434917); +#434916 = CARTESIAN_POINT('',(126.555012,-116.640187,1.585)); +#434917 = VECTOR('',#434918,1.); +#434918 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#434919 = ORIENTED_EDGE('',*,*,#434920,.T.); +#434920 = EDGE_CURVE('',#434913,#434755,#434921,.T.); +#434921 = LINE('',#434922,#434923); +#434922 = CARTESIAN_POINT('',(126.566211,-116.613151,1.585)); +#434923 = VECTOR('',#434924,1.); +#434924 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#434925 = PLANE('',#434926); +#434926 = AXIS2_PLACEMENT_3D('',#434927,#434928,#434929); +#434927 = CARTESIAN_POINT('',(0.,0.,1.585)); +#434928 = DIRECTION('',(0.,0.,1.)); +#434929 = DIRECTION('',(1.,0.,-0.)); +#434930 = SHELL_BASED_SURFACE_MODEL('',(#434931)); +#434931 = OPEN_SHELL('',(#434932)); +#434932 = ADVANCED_FACE('',(#434933),#435107,.T.); +#434933 = FACE_BOUND('',#434934,.F.); +#434934 = EDGE_LOOP('',(#434935,#434946,#434954,#434962,#434971,#434979, + #434987,#434995,#435003,#435011,#435020,#435028,#435036,#435044, + #435052,#435060,#435068,#435077,#435085,#435093,#435101)); +#434935 = ORIENTED_EDGE('',*,*,#434936,.T.); +#434936 = EDGE_CURVE('',#434937,#434939,#434941,.T.); +#434937 = VERTEX_POINT('',#434938); +#434938 = CARTESIAN_POINT('',(136.315474,-116.592459,1.585)); +#434939 = VERTEX_POINT('',#434940); +#434940 = CARTESIAN_POINT('',(136.432142,-116.654819,1.585)); +#434941 = CIRCLE('',#434942,7.500000000002E-02); +#434942 = AXIS2_PLACEMENT_3D('',#434943,#434944,#434945); +#434943 = CARTESIAN_POINT('',(136.357142,-116.6548190655,1.585)); +#434944 = DIRECTION('',(0.,0.,-1.)); +#434945 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#434946 = ORIENTED_EDGE('',*,*,#434947,.T.); +#434947 = EDGE_CURVE('',#434939,#434948,#434950,.T.); +#434948 = VERTEX_POINT('',#434949); +#434949 = CARTESIAN_POINT('',(136.432142,-116.913152,1.585)); +#434950 = LINE('',#434951,#434952); +#434951 = CARTESIAN_POINT('',(136.432142,-116.654819,1.585)); +#434952 = VECTOR('',#434953,1.); +#434953 = DIRECTION('',(0.,-1.,0.)); +#434954 = ORIENTED_EDGE('',*,*,#434955,.T.); +#434955 = EDGE_CURVE('',#434948,#434956,#434958,.T.); +#434956 = VERTEX_POINT('',#434957); +#434957 = CARTESIAN_POINT('',(136.609869,-116.914593,1.585)); +#434958 = LINE('',#434959,#434960); +#434959 = CARTESIAN_POINT('',(136.432142,-116.913152,1.585)); +#434960 = VECTOR('',#434961,1.); +#434961 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#434962 = ORIENTED_EDGE('',*,*,#434963,.T.); +#434963 = EDGE_CURVE('',#434956,#434964,#434966,.T.); +#434964 = VERTEX_POINT('',#434965); +#434965 = CARTESIAN_POINT('',(136.595237,-117.063152,1.585)); +#434966 = CIRCLE('',#434967,7.500006711464E-02); +#434967 = AXIS2_PLACEMENT_3D('',#434968,#434969,#434970); +#434968 = CARTESIAN_POINT('',(136.59523706711,-116.9881519328,1.585)); +#434969 = DIRECTION('',(0.,0.,-1.)); +#434970 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#434971 = ORIENTED_EDGE('',*,*,#434972,.T.); +#434972 = EDGE_CURVE('',#434964,#434973,#434975,.T.); +#434973 = VERTEX_POINT('',#434974); +#434974 = CARTESIAN_POINT('',(136.432142,-117.063152,1.585)); +#434975 = LINE('',#434976,#434977); +#434976 = CARTESIAN_POINT('',(136.595237,-117.063152,1.585)); +#434977 = VECTOR('',#434978,1.); +#434978 = DIRECTION('',(-1.,0.,0.)); +#434979 = ORIENTED_EDGE('',*,*,#434980,.T.); +#434980 = EDGE_CURVE('',#434973,#434981,#434983,.T.); +#434981 = VERTEX_POINT('',#434982); +#434982 = CARTESIAN_POINT('',(136.432142,-117.494256,1.585)); +#434983 = LINE('',#434984,#434985); +#434984 = CARTESIAN_POINT('',(136.432142,-117.063152,1.585)); +#434985 = VECTOR('',#434986,1.); +#434986 = DIRECTION('',(0.,-1.,0.)); +#434987 = ORIENTED_EDGE('',*,*,#434988,.T.); +#434988 = EDGE_CURVE('',#434981,#434989,#434991,.T.); +#434989 = VERTEX_POINT('',#434990); +#434990 = CARTESIAN_POINT('',(136.460662,-117.551298,1.585)); +#434991 = LINE('',#434992,#434993); +#434992 = CARTESIAN_POINT('',(136.432142,-117.494256,1.585)); +#434993 = VECTOR('',#434994,1.); +#434994 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#434995 = ORIENTED_EDGE('',*,*,#434996,.T.); +#434996 = EDGE_CURVE('',#434989,#434997,#434999,.T.); +#434997 = VERTEX_POINT('',#434998); +#434998 = CARTESIAN_POINT('',(136.517704,-117.579819,1.585)); +#434999 = LINE('',#435000,#435001); +#435000 = CARTESIAN_POINT('',(136.460662,-117.551298,1.585)); +#435001 = VECTOR('',#435002,1.); +#435002 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#435003 = ORIENTED_EDGE('',*,*,#435004,.T.); +#435004 = EDGE_CURVE('',#434997,#435005,#435007,.T.); +#435005 = VERTEX_POINT('',#435006); +#435006 = CARTESIAN_POINT('',(136.609869,-117.58126,1.585)); +#435007 = LINE('',#435008,#435009); +#435008 = CARTESIAN_POINT('',(136.517704,-117.579819,1.585)); +#435009 = VECTOR('',#435010,1.); +#435010 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#435011 = ORIENTED_EDGE('',*,*,#435012,.T.); +#435012 = EDGE_CURVE('',#435005,#435013,#435015,.T.); +#435013 = VERTEX_POINT('',#435014); +#435014 = CARTESIAN_POINT('',(136.595237,-117.729819,1.585)); +#435015 = CIRCLE('',#435016,7.500006711464E-02); +#435016 = AXIS2_PLACEMENT_3D('',#435017,#435018,#435019); +#435017 = CARTESIAN_POINT('',(136.59523706711,-117.6548189328,1.585)); +#435018 = DIRECTION('',(0.,0.,-1.)); +#435019 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#435020 = ORIENTED_EDGE('',*,*,#435021,.T.); +#435021 = EDGE_CURVE('',#435013,#435022,#435024,.T.); +#435022 = VERTEX_POINT('',#435023); +#435023 = CARTESIAN_POINT('',(136.480189,-117.727156,1.585)); +#435024 = LINE('',#435025,#435026); +#435025 = CARTESIAN_POINT('',(136.595237,-117.729819,1.585)); +#435026 = VECTOR('',#435027,1.); +#435027 = DIRECTION('',(-0.999732219024,2.314066215209E-02,0.)); +#435028 = ORIENTED_EDGE('',*,*,#435029,.T.); +#435029 = EDGE_CURVE('',#435022,#435030,#435032,.T.); +#435030 = VERTEX_POINT('',#435031); +#435031 = CARTESIAN_POINT('',(136.358777,-117.66645,1.585)); +#435032 = LINE('',#435033,#435034); +#435033 = CARTESIAN_POINT('',(136.480189,-117.727156,1.585)); +#435034 = VECTOR('',#435035,1.); +#435035 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#435036 = ORIENTED_EDGE('',*,*,#435037,.T.); +#435037 = EDGE_CURVE('',#435030,#435038,#435040,.T.); +#435038 = VERTEX_POINT('',#435039); +#435039 = CARTESIAN_POINT('',(136.337679,-117.640741,1.585)); +#435040 = LINE('',#435041,#435042); +#435041 = CARTESIAN_POINT('',(136.358777,-117.66645,1.585)); +#435042 = VECTOR('',#435043,1.); +#435043 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#435044 = ORIENTED_EDGE('',*,*,#435045,.T.); +#435045 = EDGE_CURVE('',#435038,#435046,#435048,.T.); +#435046 = VERTEX_POINT('',#435047); +#435047 = CARTESIAN_POINT('',(136.283583,-117.526593,1.585)); +#435048 = LINE('',#435049,#435050); +#435049 = CARTESIAN_POINT('',(136.337679,-117.640741,1.585)); +#435050 = VECTOR('',#435051,1.); +#435051 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#435052 = ORIENTED_EDGE('',*,*,#435053,.T.); +#435053 = EDGE_CURVE('',#435046,#435054,#435056,.T.); +#435054 = VERTEX_POINT('',#435055); +#435055 = CARTESIAN_POINT('',(136.282142,-117.063152,1.585)); +#435056 = LINE('',#435057,#435058); +#435057 = CARTESIAN_POINT('',(136.283583,-117.526593,1.585)); +#435058 = VECTOR('',#435059,1.); +#435059 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#435060 = ORIENTED_EDGE('',*,*,#435061,.T.); +#435061 = EDGE_CURVE('',#435054,#435062,#435064,.T.); +#435062 = VERTEX_POINT('',#435063); +#435063 = CARTESIAN_POINT('',(136.199653,-117.061711,1.585)); +#435064 = LINE('',#435065,#435066); +#435065 = CARTESIAN_POINT('',(136.282142,-117.063152,1.585)); +#435066 = VECTOR('',#435067,1.); +#435067 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#435068 = ORIENTED_EDGE('',*,*,#435069,.T.); +#435069 = EDGE_CURVE('',#435062,#435070,#435072,.T.); +#435070 = VERTEX_POINT('',#435071); +#435071 = CARTESIAN_POINT('',(136.214285,-116.913152,1.585)); +#435072 = CIRCLE('',#435073,7.500006711464E-02); +#435073 = AXIS2_PLACEMENT_3D('',#435074,#435075,#435076); +#435074 = CARTESIAN_POINT('',(136.21428493288,-116.9881520671,1.585)); +#435075 = DIRECTION('',(0.,0.,-1.)); +#435076 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#435077 = ORIENTED_EDGE('',*,*,#435078,.T.); +#435078 = EDGE_CURVE('',#435070,#435079,#435081,.T.); +#435079 = VERTEX_POINT('',#435080); +#435080 = CARTESIAN_POINT('',(136.282142,-116.913152,1.585)); +#435081 = LINE('',#435082,#435083); +#435082 = CARTESIAN_POINT('',(136.214285,-116.913152,1.585)); +#435083 = VECTOR('',#435084,1.); +#435084 = DIRECTION('',(1.,0.,0.)); +#435085 = ORIENTED_EDGE('',*,*,#435086,.T.); +#435086 = EDGE_CURVE('',#435079,#435087,#435089,.T.); +#435087 = VERTEX_POINT('',#435088); +#435088 = CARTESIAN_POINT('',(136.283583,-116.640187,1.585)); +#435089 = LINE('',#435090,#435091); +#435090 = CARTESIAN_POINT('',(136.282142,-116.913152,1.585)); +#435091 = VECTOR('',#435092,1.); +#435092 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#435093 = ORIENTED_EDGE('',*,*,#435094,.T.); +#435094 = EDGE_CURVE('',#435087,#435095,#435097,.T.); +#435095 = VERTEX_POINT('',#435096); +#435096 = CARTESIAN_POINT('',(136.294782,-116.613151,1.585)); +#435097 = LINE('',#435098,#435099); +#435098 = CARTESIAN_POINT('',(136.283583,-116.640187,1.585)); +#435099 = VECTOR('',#435100,1.); +#435100 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#435101 = ORIENTED_EDGE('',*,*,#435102,.T.); +#435102 = EDGE_CURVE('',#435095,#434937,#435103,.T.); +#435103 = LINE('',#435104,#435105); +#435104 = CARTESIAN_POINT('',(136.294782,-116.613151,1.585)); +#435105 = VECTOR('',#435106,1.); +#435106 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#435107 = PLANE('',#435108); +#435108 = AXIS2_PLACEMENT_3D('',#435109,#435110,#435111); +#435109 = CARTESIAN_POINT('',(0.,0.,1.585)); +#435110 = DIRECTION('',(0.,0.,1.)); +#435111 = DIRECTION('',(1.,0.,-0.)); +#435112 = SHELL_BASED_SURFACE_MODEL('',(#435113)); +#435113 = OPEN_SHELL('',(#435114)); +#435114 = ADVANCED_FACE('',(#435115),#435289,.T.); +#435115 = FACE_BOUND('',#435116,.F.); +#435116 = EDGE_LOOP('',(#435117,#435128,#435136,#435144,#435153,#435161, + #435169,#435177,#435185,#435193,#435202,#435210,#435218,#435226, + #435234,#435242,#435250,#435259,#435267,#435275,#435283)); +#435117 = ORIENTED_EDGE('',*,*,#435118,.T.); +#435118 = EDGE_CURVE('',#435119,#435121,#435123,.T.); +#435119 = VERTEX_POINT('',#435120); +#435120 = CARTESIAN_POINT('',(136.886903,-116.592459,1.585)); +#435121 = VERTEX_POINT('',#435122); +#435122 = CARTESIAN_POINT('',(137.003571,-116.654819,1.585)); +#435123 = CIRCLE('',#435124,7.500000000003E-02); +#435124 = AXIS2_PLACEMENT_3D('',#435125,#435126,#435127); +#435125 = CARTESIAN_POINT('',(136.928571,-116.6548190655,1.585)); +#435126 = DIRECTION('',(0.,0.,-1.)); +#435127 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#435128 = ORIENTED_EDGE('',*,*,#435129,.T.); +#435129 = EDGE_CURVE('',#435121,#435130,#435132,.T.); +#435130 = VERTEX_POINT('',#435131); +#435131 = CARTESIAN_POINT('',(137.003571,-116.913152,1.585)); +#435132 = LINE('',#435133,#435134); +#435133 = CARTESIAN_POINT('',(137.003571,-116.654819,1.585)); +#435134 = VECTOR('',#435135,1.); +#435135 = DIRECTION('',(0.,-1.,0.)); +#435136 = ORIENTED_EDGE('',*,*,#435137,.T.); +#435137 = EDGE_CURVE('',#435130,#435138,#435140,.T.); +#435138 = VERTEX_POINT('',#435139); +#435139 = CARTESIAN_POINT('',(137.181298,-116.914593,1.585)); +#435140 = LINE('',#435141,#435142); +#435141 = CARTESIAN_POINT('',(137.003571,-116.913152,1.585)); +#435142 = VECTOR('',#435143,1.); +#435143 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#435144 = ORIENTED_EDGE('',*,*,#435145,.T.); +#435145 = EDGE_CURVE('',#435138,#435146,#435148,.T.); +#435146 = VERTEX_POINT('',#435147); +#435147 = CARTESIAN_POINT('',(137.166666,-117.063152,1.585)); +#435148 = CIRCLE('',#435149,7.500006711465E-02); +#435149 = AXIS2_PLACEMENT_3D('',#435150,#435151,#435152); +#435150 = CARTESIAN_POINT('',(137.16666606711,-116.9881519328,1.585)); +#435151 = DIRECTION('',(0.,0.,-1.)); +#435152 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#435153 = ORIENTED_EDGE('',*,*,#435154,.T.); +#435154 = EDGE_CURVE('',#435146,#435155,#435157,.T.); +#435155 = VERTEX_POINT('',#435156); +#435156 = CARTESIAN_POINT('',(137.003571,-117.063152,1.585)); +#435157 = LINE('',#435158,#435159); +#435158 = CARTESIAN_POINT('',(137.166666,-117.063152,1.585)); +#435159 = VECTOR('',#435160,1.); +#435160 = DIRECTION('',(-1.,0.,0.)); +#435161 = ORIENTED_EDGE('',*,*,#435162,.T.); +#435162 = EDGE_CURVE('',#435155,#435163,#435165,.T.); +#435163 = VERTEX_POINT('',#435164); +#435164 = CARTESIAN_POINT('',(137.003571,-117.494256,1.585)); +#435165 = LINE('',#435166,#435167); +#435166 = CARTESIAN_POINT('',(137.003571,-117.063152,1.585)); +#435167 = VECTOR('',#435168,1.); +#435168 = DIRECTION('',(0.,-1.,0.)); +#435169 = ORIENTED_EDGE('',*,*,#435170,.T.); +#435170 = EDGE_CURVE('',#435163,#435171,#435173,.T.); +#435171 = VERTEX_POINT('',#435172); +#435172 = CARTESIAN_POINT('',(137.032091,-117.551298,1.585)); +#435173 = LINE('',#435174,#435175); +#435174 = CARTESIAN_POINT('',(137.003571,-117.494256,1.585)); +#435175 = VECTOR('',#435176,1.); +#435176 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#435177 = ORIENTED_EDGE('',*,*,#435178,.T.); +#435178 = EDGE_CURVE('',#435171,#435179,#435181,.T.); +#435179 = VERTEX_POINT('',#435180); +#435180 = CARTESIAN_POINT('',(137.089133,-117.579819,1.585)); +#435181 = LINE('',#435182,#435183); +#435182 = CARTESIAN_POINT('',(137.032091,-117.551298,1.585)); +#435183 = VECTOR('',#435184,1.); +#435184 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#435185 = ORIENTED_EDGE('',*,*,#435186,.T.); +#435186 = EDGE_CURVE('',#435179,#435187,#435189,.T.); +#435187 = VERTEX_POINT('',#435188); +#435188 = CARTESIAN_POINT('',(137.181298,-117.58126,1.585)); +#435189 = LINE('',#435190,#435191); +#435190 = CARTESIAN_POINT('',(137.089133,-117.579819,1.585)); +#435191 = VECTOR('',#435192,1.); +#435192 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#435193 = ORIENTED_EDGE('',*,*,#435194,.T.); +#435194 = EDGE_CURVE('',#435187,#435195,#435197,.T.); +#435195 = VERTEX_POINT('',#435196); +#435196 = CARTESIAN_POINT('',(137.166666,-117.729819,1.585)); +#435197 = CIRCLE('',#435198,7.500006711464E-02); +#435198 = AXIS2_PLACEMENT_3D('',#435199,#435200,#435201); +#435199 = CARTESIAN_POINT('',(137.16666606711,-117.6548189328,1.585)); +#435200 = DIRECTION('',(0.,0.,-1.)); +#435201 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#435202 = ORIENTED_EDGE('',*,*,#435203,.T.); +#435203 = EDGE_CURVE('',#435195,#435204,#435206,.T.); +#435204 = VERTEX_POINT('',#435205); +#435205 = CARTESIAN_POINT('',(137.051618,-117.727156,1.585)); +#435206 = LINE('',#435207,#435208); +#435207 = CARTESIAN_POINT('',(137.166666,-117.729819,1.585)); +#435208 = VECTOR('',#435209,1.); +#435209 = DIRECTION('',(-0.999732219024,2.314066215209E-02,0.)); +#435210 = ORIENTED_EDGE('',*,*,#435211,.T.); +#435211 = EDGE_CURVE('',#435204,#435212,#435214,.T.); +#435212 = VERTEX_POINT('',#435213); +#435213 = CARTESIAN_POINT('',(136.930206,-117.66645,1.585)); +#435214 = LINE('',#435215,#435216); +#435215 = CARTESIAN_POINT('',(137.051618,-117.727156,1.585)); +#435216 = VECTOR('',#435217,1.); +#435217 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#435218 = ORIENTED_EDGE('',*,*,#435219,.T.); +#435219 = EDGE_CURVE('',#435212,#435220,#435222,.T.); +#435220 = VERTEX_POINT('',#435221); +#435221 = CARTESIAN_POINT('',(136.909108,-117.640741,1.585)); +#435222 = LINE('',#435223,#435224); +#435223 = CARTESIAN_POINT('',(136.930206,-117.66645,1.585)); +#435224 = VECTOR('',#435225,1.); +#435225 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#435226 = ORIENTED_EDGE('',*,*,#435227,.T.); +#435227 = EDGE_CURVE('',#435220,#435228,#435230,.T.); +#435228 = VERTEX_POINT('',#435229); +#435229 = CARTESIAN_POINT('',(136.855012,-117.526593,1.585)); +#435230 = LINE('',#435231,#435232); +#435231 = CARTESIAN_POINT('',(136.909108,-117.640741,1.585)); +#435232 = VECTOR('',#435233,1.); +#435233 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#435234 = ORIENTED_EDGE('',*,*,#435235,.T.); +#435235 = EDGE_CURVE('',#435228,#435236,#435238,.T.); +#435236 = VERTEX_POINT('',#435237); +#435237 = CARTESIAN_POINT('',(136.853571,-117.063152,1.585)); +#435238 = LINE('',#435239,#435240); +#435239 = CARTESIAN_POINT('',(136.855012,-117.526593,1.585)); +#435240 = VECTOR('',#435241,1.); +#435241 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#435242 = ORIENTED_EDGE('',*,*,#435243,.T.); +#435243 = EDGE_CURVE('',#435236,#435244,#435246,.T.); +#435244 = VERTEX_POINT('',#435245); +#435245 = CARTESIAN_POINT('',(136.771082,-117.061711,1.585)); +#435246 = LINE('',#435247,#435248); +#435247 = CARTESIAN_POINT('',(136.853571,-117.063152,1.585)); +#435248 = VECTOR('',#435249,1.); +#435249 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#435250 = ORIENTED_EDGE('',*,*,#435251,.T.); +#435251 = EDGE_CURVE('',#435244,#435252,#435254,.T.); +#435252 = VERTEX_POINT('',#435253); +#435253 = CARTESIAN_POINT('',(136.785714,-116.913152,1.585)); +#435254 = CIRCLE('',#435255,7.500006711465E-02); +#435255 = AXIS2_PLACEMENT_3D('',#435256,#435257,#435258); +#435256 = CARTESIAN_POINT('',(136.78571393288,-116.9881520671,1.585)); +#435257 = DIRECTION('',(0.,0.,-1.)); +#435258 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#435259 = ORIENTED_EDGE('',*,*,#435260,.T.); +#435260 = EDGE_CURVE('',#435252,#435261,#435263,.T.); +#435261 = VERTEX_POINT('',#435262); +#435262 = CARTESIAN_POINT('',(136.853571,-116.913152,1.585)); +#435263 = LINE('',#435264,#435265); +#435264 = CARTESIAN_POINT('',(136.785714,-116.913152,1.585)); +#435265 = VECTOR('',#435266,1.); +#435266 = DIRECTION('',(1.,0.,0.)); +#435267 = ORIENTED_EDGE('',*,*,#435268,.T.); +#435268 = EDGE_CURVE('',#435261,#435269,#435271,.T.); +#435269 = VERTEX_POINT('',#435270); +#435270 = CARTESIAN_POINT('',(136.855012,-116.640187,1.585)); +#435271 = LINE('',#435272,#435273); +#435272 = CARTESIAN_POINT('',(136.853571,-116.913152,1.585)); +#435273 = VECTOR('',#435274,1.); +#435274 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#435275 = ORIENTED_EDGE('',*,*,#435276,.T.); +#435276 = EDGE_CURVE('',#435269,#435277,#435279,.T.); +#435277 = VERTEX_POINT('',#435278); +#435278 = CARTESIAN_POINT('',(136.866211,-116.613151,1.585)); +#435279 = LINE('',#435280,#435281); +#435280 = CARTESIAN_POINT('',(136.855012,-116.640187,1.585)); +#435281 = VECTOR('',#435282,1.); +#435282 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#435283 = ORIENTED_EDGE('',*,*,#435284,.T.); +#435284 = EDGE_CURVE('',#435277,#435119,#435285,.T.); +#435285 = LINE('',#435286,#435287); +#435286 = CARTESIAN_POINT('',(136.866211,-116.613151,1.585)); +#435287 = VECTOR('',#435288,1.); +#435288 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#435289 = PLANE('',#435290); +#435290 = AXIS2_PLACEMENT_3D('',#435291,#435292,#435293); +#435291 = CARTESIAN_POINT('',(0.,0.,1.585)); +#435292 = DIRECTION('',(0.,0.,1.)); +#435293 = DIRECTION('',(1.,0.,-0.)); +#435294 = SHELL_BASED_SURFACE_MODEL('',(#435295)); +#435295 = OPEN_SHELL('',(#435296)); +#435296 = ADVANCED_FACE('',(#435297,#435415,#435482),#435534,.T.); +#435297 = FACE_BOUND('',#435298,.F.); +#435298 = EDGE_LOOP('',(#435299,#435310,#435318,#435327,#435335,#435343, + #435351,#435359,#435367,#435376,#435384,#435393,#435401,#435409)); +#435299 = ORIENTED_EDGE('',*,*,#435300,.T.); +#435300 = EDGE_CURVE('',#435301,#435303,#435305,.T.); +#435301 = VERTEX_POINT('',#435302); +#435302 = CARTESIAN_POINT('',(124.078821,-116.640187,1.585)); +#435303 = VERTEX_POINT('',#435304); +#435304 = CARTESIAN_POINT('',(124.15238,-116.579819,1.585)); +#435305 = CIRCLE('',#435306,7.500074938981E-02); +#435306 = AXIS2_PLACEMENT_3D('',#435307,#435308,#435309); +#435307 = CARTESIAN_POINT('',(124.15238046611,-116.6548197493,1.585)); +#435308 = DIRECTION('',(0.,0.,-1.)); +#435309 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#435310 = ORIENTED_EDGE('',*,*,#435311,.T.); +#435311 = EDGE_CURVE('',#435303,#435312,#435314,.T.); +#435312 = VERTEX_POINT('',#435313); +#435313 = CARTESIAN_POINT('',(124.500345,-116.58126,1.585)); +#435314 = LINE('',#435315,#435316); +#435315 = CARTESIAN_POINT('',(124.15238,-116.579819,1.585)); +#435316 = VECTOR('',#435317,1.); +#435317 = DIRECTION('',(0.999991425254,-4.141185589904E-03,0.)); +#435318 = ORIENTED_EDGE('',*,*,#435319,.T.); +#435319 = EDGE_CURVE('',#435312,#435320,#435322,.T.); +#435320 = VERTEX_POINT('',#435321); +#435321 = CARTESIAN_POINT('',(124.749748,-116.830663,1.585)); +#435322 = CIRCLE('',#435323,0.347870264855); +#435323 = AXIS2_PLACEMENT_3D('',#435324,#435325,#435326); +#435324 = CARTESIAN_POINT('',(124.41301726502,-116.9179907349,1.585)); +#435325 = DIRECTION('',(0.,0.,-1.)); +#435326 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#435327 = ORIENTED_EDGE('',*,*,#435328,.T.); +#435328 = EDGE_CURVE('',#435320,#435329,#435331,.T.); +#435329 = VERTEX_POINT('',#435330); +#435330 = CARTESIAN_POINT('',(124.748526,-116.960343,1.585)); +#435331 = LINE('',#435332,#435333); +#435332 = CARTESIAN_POINT('',(124.749748,-116.830663,1.585)); +#435333 = VECTOR('',#435334,1.); +#435334 = DIRECTION('',(-9.422777212215E-03,-0.999955604649,0.)); +#435335 = ORIENTED_EDGE('',*,*,#435336,.T.); +#435336 = EDGE_CURVE('',#435329,#435337,#435339,.T.); +#435337 = VERTEX_POINT('',#435338); +#435338 = CARTESIAN_POINT('',(124.686321,-117.083054,1.585)); +#435339 = LINE('',#435340,#435341); +#435340 = CARTESIAN_POINT('',(124.748526,-116.960343,1.585)); +#435341 = VECTOR('',#435342,1.); +#435342 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#435343 = ORIENTED_EDGE('',*,*,#435344,.T.); +#435344 = EDGE_CURVE('',#435337,#435345,#435347,.T.); +#435345 = VERTEX_POINT('',#435346); +#435346 = CARTESIAN_POINT('',(124.659644,-117.110762,1.585)); +#435347 = LINE('',#435348,#435349); +#435348 = CARTESIAN_POINT('',(124.686321,-117.083054,1.585)); +#435349 = VECTOR('',#435350,1.); +#435350 = DIRECTION('',(-0.693577232498,-0.720382275295,0.)); +#435351 = ORIENTED_EDGE('',*,*,#435352,.T.); +#435352 = EDGE_CURVE('',#435345,#435353,#435355,.T.); +#435353 = VERTEX_POINT('',#435354); +#435354 = CARTESIAN_POINT('',(124.681603,-117.125595,1.585)); +#435355 = LINE('',#435356,#435357); +#435356 = CARTESIAN_POINT('',(124.659644,-117.110762,1.585)); +#435357 = VECTOR('',#435358,1.); +#435358 = DIRECTION('',(0.82866182355,-0.559749570961,0.)); +#435359 = ORIENTED_EDGE('',*,*,#435360,.T.); +#435360 = EDGE_CURVE('',#435353,#435361,#435363,.T.); +#435361 = VERTEX_POINT('',#435362); +#435362 = CARTESIAN_POINT('',(124.743271,-117.192706,1.585)); +#435363 = LINE('',#435364,#435365); +#435364 = CARTESIAN_POINT('',(124.681603,-117.125595,1.585)); +#435365 = VECTOR('',#435366,1.); +#435366 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#435367 = ORIENTED_EDGE('',*,*,#435368,.T.); +#435368 = EDGE_CURVE('',#435361,#435369,#435371,.T.); +#435369 = VERTEX_POINT('',#435370); +#435370 = CARTESIAN_POINT('',(124.73394,-117.606863,1.585)); +#435371 = CIRCLE('',#435372,0.341850333486); +#435372 = AXIS2_PLACEMENT_3D('',#435373,#435374,#435375); +#435373 = CARTESIAN_POINT('',(124.46672159864,-117.3936589276,1.585)); +#435374 = DIRECTION('',(0.,0.,-1.)); +#435375 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#435376 = ORIENTED_EDGE('',*,*,#435377,.T.); +#435377 = EDGE_CURVE('',#435369,#435378,#435380,.T.); +#435378 = VERTEX_POINT('',#435379); +#435379 = CARTESIAN_POINT('',(124.66841,-117.670317,1.585)); +#435380 = LINE('',#435381,#435382); +#435381 = CARTESIAN_POINT('',(124.73394,-117.606863,1.585)); +#435382 = VECTOR('',#435383,1.); +#435383 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#435384 = ORIENTED_EDGE('',*,*,#435385,.T.); +#435385 = EDGE_CURVE('',#435378,#435386,#435388,.T.); +#435386 = VERTEX_POINT('',#435387); +#435387 = CARTESIAN_POINT('',(124.110712,-117.717179,1.585)); +#435388 = CIRCLE('',#435389,0.612118292739); +#435389 = AXIS2_PLACEMENT_3D('',#435390,#435391,#435392); +#435390 = CARTESIAN_POINT('',(124.34397614383,-117.1512491072,1.585)); +#435391 = DIRECTION('',(-0.,0.,-1.)); +#435392 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#435393 = ORIENTED_EDGE('',*,*,#435394,.T.); +#435394 = EDGE_CURVE('',#435386,#435395,#435397,.T.); +#435395 = VERTEX_POINT('',#435396); +#435396 = CARTESIAN_POINT('',(124.09002,-117.696487,1.585)); +#435397 = LINE('',#435398,#435399); +#435398 = CARTESIAN_POINT('',(124.110712,-117.717179,1.585)); +#435399 = VECTOR('',#435400,1.); +#435400 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#435401 = ORIENTED_EDGE('',*,*,#435402,.T.); +#435402 = EDGE_CURVE('',#435395,#435403,#435405,.T.); +#435403 = VERTEX_POINT('',#435404); +#435404 = CARTESIAN_POINT('',(124.07738,-117.654819,1.585)); +#435405 = LINE('',#435406,#435407); +#435406 = CARTESIAN_POINT('',(124.09002,-117.696487,1.585)); +#435407 = VECTOR('',#435408,1.); +#435408 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#435409 = ORIENTED_EDGE('',*,*,#435410,.T.); +#435410 = EDGE_CURVE('',#435403,#435301,#435411,.T.); +#435411 = LINE('',#435412,#435413); +#435412 = CARTESIAN_POINT('',(124.07738,-117.654819,1.585)); +#435413 = VECTOR('',#435414,1.); +#435414 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#435415 = FACE_BOUND('',#435416,.F.); +#435416 = EDGE_LOOP('',(#435417,#435427,#435435,#435443,#435451,#435460, + #435468,#435476)); +#435417 = ORIENTED_EDGE('',*,*,#435418,.T.); +#435418 = EDGE_CURVE('',#435419,#435421,#435423,.T.); +#435419 = VERTEX_POINT('',#435420); +#435420 = CARTESIAN_POINT('',(124.588056,-117.24418,1.585)); +#435421 = VERTEX_POINT('',#435422); +#435422 = CARTESIAN_POINT('',(124.473543,-117.206009,1.585)); +#435423 = LINE('',#435424,#435425); +#435424 = CARTESIAN_POINT('',(124.588056,-117.24418,1.585)); +#435425 = VECTOR('',#435426,1.); +#435426 = DIRECTION('',(-0.94868329805,0.316227766017,0.)); +#435427 = ORIENTED_EDGE('',*,*,#435428,.T.); +#435428 = EDGE_CURVE('',#435421,#435429,#435431,.T.); +#435429 = VERTEX_POINT('',#435430); +#435430 = CARTESIAN_POINT('',(124.22738,-117.206009,1.585)); +#435431 = LINE('',#435432,#435433); +#435432 = CARTESIAN_POINT('',(124.473543,-117.206009,1.585)); +#435433 = VECTOR('',#435434,1.); +#435434 = DIRECTION('',(-1.,0.,0.)); +#435435 = ORIENTED_EDGE('',*,*,#435436,.T.); +#435436 = EDGE_CURVE('',#435429,#435437,#435439,.T.); +#435437 = VERTEX_POINT('',#435438); +#435438 = CARTESIAN_POINT('',(124.22738,-117.579819,1.585)); +#435439 = LINE('',#435440,#435441); +#435440 = CARTESIAN_POINT('',(124.22738,-117.206009,1.585)); +#435441 = VECTOR('',#435442,1.); +#435442 = DIRECTION('',(0.,-1.,0.)); +#435443 = ORIENTED_EDGE('',*,*,#435444,.T.); +#435444 = EDGE_CURVE('',#435437,#435445,#435447,.T.); +#435445 = VERTEX_POINT('',#435446); +#435446 = CARTESIAN_POINT('',(124.515627,-117.579819,1.585)); +#435447 = LINE('',#435448,#435449); +#435448 = CARTESIAN_POINT('',(124.22738,-117.579819,1.585)); +#435449 = VECTOR('',#435450,1.); +#435450 = DIRECTION('',(1.,0.,0.)); +#435451 = ORIENTED_EDGE('',*,*,#435452,.T.); +#435452 = EDGE_CURVE('',#435445,#435453,#435455,.T.); +#435453 = VERTEX_POINT('',#435454); +#435454 = CARTESIAN_POINT('',(124.648808,-117.446637,1.585)); +#435455 = CIRCLE('',#435456,0.186867760544); +#435456 = AXIS2_PLACEMENT_3D('',#435457,#435458,#435459); +#435457 = CARTESIAN_POINT('',(124.46808796928,-117.3990993262,1.585)); +#435458 = DIRECTION('',(0.,0.,1.)); +#435459 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#435460 = ORIENTED_EDGE('',*,*,#435461,.T.); +#435461 = EDGE_CURVE('',#435453,#435462,#435464,.T.); +#435462 = VERTEX_POINT('',#435463); +#435463 = CARTESIAN_POINT('',(124.648808,-117.33919,1.585)); +#435464 = LINE('',#435465,#435466); +#435465 = CARTESIAN_POINT('',(124.648808,-117.446637,1.585)); +#435466 = VECTOR('',#435467,1.); +#435467 = DIRECTION('',(0.,1.,0.)); +#435468 = ORIENTED_EDGE('',*,*,#435469,.T.); +#435469 = EDGE_CURVE('',#435462,#435470,#435472,.T.); +#435470 = VERTEX_POINT('',#435471); +#435471 = CARTESIAN_POINT('',(124.61455,-117.270674,1.585)); +#435472 = LINE('',#435473,#435474); +#435473 = CARTESIAN_POINT('',(124.648808,-117.33919,1.585)); +#435474 = VECTOR('',#435475,1.); +#435475 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#435476 = ORIENTED_EDGE('',*,*,#435477,.T.); +#435477 = EDGE_CURVE('',#435470,#435419,#435478,.T.); +#435478 = LINE('',#435479,#435480); +#435479 = CARTESIAN_POINT('',(124.61455,-117.270674,1.585)); +#435480 = VECTOR('',#435481,1.); +#435481 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#435482 = FACE_BOUND('',#435483,.F.); +#435483 = EDGE_LOOP('',(#435484,#435495,#435503,#435511,#435519,#435528) + ); +#435484 = ORIENTED_EDGE('',*,*,#435485,.T.); +#435485 = EDGE_CURVE('',#435486,#435488,#435490,.T.); +#435486 = VERTEX_POINT('',#435487); +#435487 = CARTESIAN_POINT('',(124.601189,-116.863,1.585)); +#435488 = VERTEX_POINT('',#435489); +#435489 = CARTESIAN_POINT('',(124.468008,-116.729819,1.585)); +#435490 = CIRCLE('',#435491,0.18686440374); +#435491 = AXIS2_PLACEMENT_3D('',#435492,#435493,#435494); +#435492 = CARTESIAN_POINT('',(124.420472,-116.910536,1.585)); +#435493 = DIRECTION('',(0.,0.,1.)); +#435494 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#435495 = ORIENTED_EDGE('',*,*,#435496,.T.); +#435496 = EDGE_CURVE('',#435488,#435497,#435499,.T.); +#435497 = VERTEX_POINT('',#435498); +#435498 = CARTESIAN_POINT('',(124.22738,-116.729819,1.585)); +#435499 = LINE('',#435500,#435501); +#435500 = CARTESIAN_POINT('',(124.468008,-116.729819,1.585)); +#435501 = VECTOR('',#435502,1.); +#435502 = DIRECTION('',(-1.,0.,0.)); +#435503 = ORIENTED_EDGE('',*,*,#435504,.T.); +#435504 = EDGE_CURVE('',#435497,#435505,#435507,.T.); +#435505 = VERTEX_POINT('',#435506); +#435506 = CARTESIAN_POINT('',(124.22738,-117.056009,1.585)); +#435507 = LINE('',#435508,#435509); +#435508 = CARTESIAN_POINT('',(124.22738,-116.729819,1.585)); +#435509 = VECTOR('',#435510,1.); +#435510 = DIRECTION('',(0.,-1.,0.)); +#435511 = ORIENTED_EDGE('',*,*,#435512,.T.); +#435512 = EDGE_CURVE('',#435505,#435513,#435515,.T.); +#435513 = VERTEX_POINT('',#435514); +#435514 = CARTESIAN_POINT('',(124.468008,-117.056009,1.585)); +#435515 = LINE('',#435516,#435517); +#435516 = CARTESIAN_POINT('',(124.22738,-117.056009,1.585)); +#435517 = VECTOR('',#435518,1.); +#435518 = DIRECTION('',(1.,0.,0.)); +#435519 = ORIENTED_EDGE('',*,*,#435520,.T.); +#435520 = EDGE_CURVE('',#435513,#435521,#435523,.T.); +#435521 = VERTEX_POINT('',#435522); +#435522 = CARTESIAN_POINT('',(124.601189,-116.922828,1.585)); +#435523 = CIRCLE('',#435524,0.18686440374); +#435524 = AXIS2_PLACEMENT_3D('',#435525,#435526,#435527); +#435525 = CARTESIAN_POINT('',(124.420472,-116.875292,1.585)); +#435526 = DIRECTION('',(0.,0.,1.)); +#435527 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#435528 = ORIENTED_EDGE('',*,*,#435529,.T.); +#435529 = EDGE_CURVE('',#435521,#435486,#435530,.T.); +#435530 = LINE('',#435531,#435532); +#435531 = CARTESIAN_POINT('',(124.601189,-116.922828,1.585)); +#435532 = VECTOR('',#435533,1.); +#435533 = DIRECTION('',(0.,1.,0.)); +#435534 = PLANE('',#435535); +#435535 = AXIS2_PLACEMENT_3D('',#435536,#435537,#435538); +#435536 = CARTESIAN_POINT('',(0.,0.,1.585)); +#435537 = DIRECTION('',(0.,0.,1.)); +#435538 = DIRECTION('',(1.,0.,-0.)); +#435539 = SHELL_BASED_SURFACE_MODEL('',(#435540)); +#435540 = OPEN_SHELL('',(#435541)); +#435541 = ADVANCED_FACE('',(#435542),#435684,.T.); +#435542 = FACE_BOUND('',#435543,.F.); +#435543 = EDGE_LOOP('',(#435544,#435555,#435563,#435571,#435579,#435587, + #435595,#435603,#435611,#435620,#435628,#435637,#435645,#435653, + #435661,#435669,#435678)); +#435544 = ORIENTED_EDGE('',*,*,#435545,.T.); +#435545 = EDGE_CURVE('',#435546,#435548,#435550,.T.); +#435546 = VERTEX_POINT('',#435547); +#435547 = CARTESIAN_POINT('',(125.110712,-116.925792,1.585)); +#435548 = VERTEX_POINT('',#435549); +#435549 = CARTESIAN_POINT('',(125.22738,-116.988152,1.585)); +#435550 = CIRCLE('',#435551,7.500000000003E-02); +#435551 = AXIS2_PLACEMENT_3D('',#435552,#435553,#435554); +#435552 = CARTESIAN_POINT('',(125.15238,-116.9881520655,1.585)); +#435553 = DIRECTION('',(0.,0.,-1.)); +#435554 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#435555 = ORIENTED_EDGE('',*,*,#435556,.T.); +#435556 = EDGE_CURVE('',#435548,#435557,#435559,.T.); +#435557 = VERTEX_POINT('',#435558); +#435558 = CARTESIAN_POINT('',(125.22738,-117.494256,1.585)); +#435559 = LINE('',#435560,#435561); +#435560 = CARTESIAN_POINT('',(125.22738,-116.988152,1.585)); +#435561 = VECTOR('',#435562,1.); +#435562 = DIRECTION('',(0.,-1.,0.)); +#435563 = ORIENTED_EDGE('',*,*,#435564,.T.); +#435564 = EDGE_CURVE('',#435557,#435565,#435567,.T.); +#435565 = VERTEX_POINT('',#435566); +#435566 = CARTESIAN_POINT('',(125.2559,-117.551298,1.585)); +#435567 = LINE('',#435568,#435569); +#435568 = CARTESIAN_POINT('',(125.22738,-117.494256,1.585)); +#435569 = VECTOR('',#435570,1.); +#435570 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#435571 = ORIENTED_EDGE('',*,*,#435572,.T.); +#435572 = EDGE_CURVE('',#435565,#435573,#435575,.T.); +#435573 = VERTEX_POINT('',#435574); +#435574 = CARTESIAN_POINT('',(125.312942,-117.579819,1.585)); +#435575 = LINE('',#435576,#435577); +#435576 = CARTESIAN_POINT('',(125.2559,-117.551298,1.585)); +#435577 = VECTOR('',#435578,1.); +#435578 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#435579 = ORIENTED_EDGE('',*,*,#435580,.T.); +#435580 = EDGE_CURVE('',#435573,#435581,#435583,.T.); +#435581 = VERTEX_POINT('',#435582); +#435582 = CARTESIAN_POINT('',(125.420389,-117.579819,1.585)); +#435583 = LINE('',#435584,#435585); +#435584 = CARTESIAN_POINT('',(125.312942,-117.579819,1.585)); +#435585 = VECTOR('',#435586,1.); +#435586 = DIRECTION('',(1.,0.,0.)); +#435587 = ORIENTED_EDGE('',*,*,#435588,.T.); +#435588 = EDGE_CURVE('',#435581,#435589,#435591,.T.); +#435589 = VERTEX_POINT('',#435590); +#435590 = CARTESIAN_POINT('',(125.488904,-117.545561,1.585)); +#435591 = LINE('',#435592,#435593); +#435592 = CARTESIAN_POINT('',(125.420389,-117.579819,1.585)); +#435593 = VECTOR('',#435594,1.); +#435594 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#435595 = ORIENTED_EDGE('',*,*,#435596,.T.); +#435596 = EDGE_CURVE('',#435589,#435597,#435599,.T.); +#435597 = VERTEX_POINT('',#435598); +#435598 = CARTESIAN_POINT('',(125.505951,-117.528514,1.585)); +#435599 = LINE('',#435600,#435601); +#435600 = CARTESIAN_POINT('',(125.488904,-117.545561,1.585)); +#435601 = VECTOR('',#435602,1.); +#435602 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#435603 = ORIENTED_EDGE('',*,*,#435604,.T.); +#435604 = EDGE_CURVE('',#435597,#435605,#435607,.T.); +#435605 = VERTEX_POINT('',#435606); +#435606 = CARTESIAN_POINT('',(125.507392,-116.97352,1.585)); +#435607 = LINE('',#435608,#435609); +#435608 = CARTESIAN_POINT('',(125.505951,-117.528514,1.585)); +#435609 = VECTOR('',#435610,1.); +#435610 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#435611 = ORIENTED_EDGE('',*,*,#435612,.T.); +#435612 = EDGE_CURVE('',#435605,#435613,#435615,.T.); +#435613 = VERTEX_POINT('',#435614); +#435614 = CARTESIAN_POINT('',(125.655951,-116.988152,1.585)); +#435615 = CIRCLE('',#435616,7.500006711463E-02); +#435616 = AXIS2_PLACEMENT_3D('',#435617,#435618,#435619); +#435617 = CARTESIAN_POINT('',(125.58095093288,-116.9881519328,1.585)); +#435618 = DIRECTION('',(0.,0.,-1.)); +#435619 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#435620 = ORIENTED_EDGE('',*,*,#435621,.T.); +#435621 = EDGE_CURVE('',#435613,#435622,#435624,.T.); +#435622 = VERTEX_POINT('',#435623); +#435623 = CARTESIAN_POINT('',(125.65451,-117.669451,1.585)); +#435624 = LINE('',#435625,#435626); +#435625 = CARTESIAN_POINT('',(125.655951,-116.988152,1.585)); +#435626 = VECTOR('',#435627,1.); +#435627 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#435628 = ORIENTED_EDGE('',*,*,#435629,.T.); +#435629 = EDGE_CURVE('',#435622,#435630,#435632,.T.); +#435630 = VERTEX_POINT('',#435631); +#435631 = CARTESIAN_POINT('',(125.519881,-117.697777,1.585)); +#435632 = CIRCLE('',#435633,7.472335361468E-02); +#435633 = AXIS2_PLACEMENT_3D('',#435634,#435635,#435636); +#435634 = CARTESIAN_POINT('',(125.58118658714,-117.6550545871,1.585)); +#435635 = DIRECTION('',(-0.,0.,-1.)); +#435636 = DIRECTION('',(0.981265016972,-0.192662831049,-0.)); +#435637 = ORIENTED_EDGE('',*,*,#435638,.T.); +#435638 = EDGE_CURVE('',#435630,#435639,#435641,.T.); +#435639 = VERTEX_POINT('',#435640); +#435640 = CARTESIAN_POINT('',(125.452726,-117.728378,1.585)); +#435641 = LINE('',#435642,#435643); +#435642 = CARTESIAN_POINT('',(125.519881,-117.697777,1.585)); +#435643 = VECTOR('',#435644,1.); +#435644 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#435645 = ORIENTED_EDGE('',*,*,#435646,.T.); +#435646 = EDGE_CURVE('',#435639,#435647,#435649,.T.); +#435647 = VERTEX_POINT('',#435648); +#435648 = CARTESIAN_POINT('',(125.275427,-117.727156,1.585)); +#435649 = LINE('',#435650,#435651); +#435650 = CARTESIAN_POINT('',(125.452726,-117.728378,1.585)); +#435651 = VECTOR('',#435652,1.); +#435652 = DIRECTION('',(-0.999976248865,6.892148157212E-03,0.)); +#435653 = ORIENTED_EDGE('',*,*,#435654,.T.); +#435654 = EDGE_CURVE('',#435647,#435655,#435657,.T.); +#435655 = VERTEX_POINT('',#435656); +#435656 = CARTESIAN_POINT('',(125.154015,-117.66645,1.585)); +#435657 = LINE('',#435658,#435659); +#435658 = CARTESIAN_POINT('',(125.275427,-117.727156,1.585)); +#435659 = VECTOR('',#435660,1.); +#435660 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#435661 = ORIENTED_EDGE('',*,*,#435662,.T.); +#435662 = EDGE_CURVE('',#435655,#435663,#435665,.T.); +#435663 = VERTEX_POINT('',#435664); +#435664 = CARTESIAN_POINT('',(125.132917,-117.640741,1.585)); +#435665 = LINE('',#435666,#435667); +#435666 = CARTESIAN_POINT('',(125.154015,-117.66645,1.585)); +#435667 = VECTOR('',#435668,1.); +#435668 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#435669 = ORIENTED_EDGE('',*,*,#435670,.T.); +#435670 = EDGE_CURVE('',#435663,#435671,#435673,.T.); +#435671 = VERTEX_POINT('',#435672); +#435672 = CARTESIAN_POINT('',(125.09002,-116.946484,1.585)); +#435673 = CIRCLE('',#435674,0.780471555046); +#435674 = AXIS2_PLACEMENT_3D('',#435675,#435676,#435677); +#435675 = CARTESIAN_POINT('',(125.80883564715,-117.2505233291,1.585)); +#435676 = DIRECTION('',(0.,0.,-1.)); +#435677 = DIRECTION('',(-0.866038797673,-0.499976800387,-0.)); +#435678 = ORIENTED_EDGE('',*,*,#435679,.T.); +#435679 = EDGE_CURVE('',#435671,#435546,#435680,.T.); +#435680 = LINE('',#435681,#435682); +#435681 = CARTESIAN_POINT('',(125.09002,-116.946484,1.585)); +#435682 = VECTOR('',#435683,1.); +#435683 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#435684 = PLANE('',#435685); +#435685 = AXIS2_PLACEMENT_3D('',#435686,#435687,#435688); +#435686 = CARTESIAN_POINT('',(0.,0.,1.585)); +#435687 = DIRECTION('',(0.,0.,1.)); +#435688 = DIRECTION('',(1.,0.,-0.)); +#435689 = SHELL_BASED_SURFACE_MODEL('',(#435690)); +#435690 = OPEN_SHELL('',(#435691)); +#435691 = ADVANCED_FACE('',(#435692,#435769),#435846,.T.); +#435692 = FACE_BOUND('',#435693,.F.); +#435693 = EDGE_LOOP('',(#435694,#435705,#435713,#435721,#435730,#435738, + #435747,#435755,#435763)); +#435694 = ORIENTED_EDGE('',*,*,#435695,.T.); +#435695 = EDGE_CURVE('',#435696,#435698,#435700,.T.); +#435696 = VERTEX_POINT('',#435697); +#435697 = CARTESIAN_POINT('',(127.207778,-116.972653,1.585)); +#435698 = VERTEX_POINT('',#435699); +#435699 = CARTESIAN_POINT('',(127.691688,-117.043549,1.585)); +#435700 = CIRCLE('',#435701,0.34461174713); +#435701 = AXIS2_PLACEMENT_3D('',#435702,#435703,#435704); +#435702 = CARTESIAN_POINT('',(127.41453494377,-117.2483499757,1.585)); +#435703 = DIRECTION('',(0.,0.,-1.)); +#435704 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#435705 = ORIENTED_EDGE('',*,*,#435706,.T.); +#435706 = EDGE_CURVE('',#435698,#435707,#435709,.T.); +#435707 = VERTEX_POINT('',#435708); +#435708 = CARTESIAN_POINT('',(127.749749,-117.163996,1.585)); +#435709 = LINE('',#435710,#435711); +#435710 = CARTESIAN_POINT('',(127.691688,-117.043549,1.585)); +#435711 = VECTOR('',#435712,1.); +#435712 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#435713 = ORIENTED_EDGE('',*,*,#435714,.T.); +#435714 = EDGE_CURVE('',#435707,#435715,#435717,.T.); +#435715 = VERTEX_POINT('',#435716); +#435716 = CARTESIAN_POINT('',(127.748527,-117.484152,1.585)); +#435717 = LINE('',#435718,#435719); +#435718 = CARTESIAN_POINT('',(127.749749,-117.163996,1.585)); +#435719 = VECTOR('',#435720,1.); +#435720 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#435721 = ORIENTED_EDGE('',*,*,#435722,.T.); +#435722 = EDGE_CURVE('',#435715,#435723,#435725,.T.); +#435723 = VERTEX_POINT('',#435724); +#435724 = CARTESIAN_POINT('',(127.500346,-117.728378,1.585)); +#435725 = CIRCLE('',#435726,0.348635327447); +#435726 = AXIS2_PLACEMENT_3D('',#435727,#435728,#435729); +#435727 = CARTESIAN_POINT('',(127.41257448129,-117.3909720841,1.585)); +#435728 = DIRECTION('',(0.,0.,-1.)); +#435729 = DIRECTION('',(0.963621561732,-0.267270435637,0.)); +#435730 = ORIENTED_EDGE('',*,*,#435731,.T.); +#435731 = EDGE_CURVE('',#435723,#435732,#435734,.T.); +#435732 = VERTEX_POINT('',#435733); +#435733 = CARTESIAN_POINT('',(127.323047,-117.727156,1.585)); +#435734 = LINE('',#435735,#435736); +#435735 = CARTESIAN_POINT('',(127.500346,-117.728378,1.585)); +#435736 = VECTOR('',#435737,1.); +#435737 = DIRECTION('',(-0.999976248865,6.892148157212E-03,0.)); +#435738 = ORIENTED_EDGE('',*,*,#435739,.T.); +#435739 = EDGE_CURVE('',#435732,#435740,#435742,.T.); +#435740 = VERTEX_POINT('',#435741); +#435741 = CARTESIAN_POINT('',(127.078822,-117.478974,1.585)); +#435742 = CIRCLE('',#435743,0.348628446662); +#435743 = AXIS2_PLACEMENT_3D('',#435744,#435745,#435746); +#435744 = CARTESIAN_POINT('',(127.41622261322,-117.3912094284,1.585)); +#435745 = DIRECTION('',(0.,0.,-1.)); +#435746 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#435747 = ORIENTED_EDGE('',*,*,#435748,.T.); +#435748 = EDGE_CURVE('',#435740,#435749,#435751,.T.); +#435749 = VERTEX_POINT('',#435750); +#435750 = CARTESIAN_POINT('',(127.080044,-117.158819,1.585)); +#435751 = LINE('',#435752,#435753); +#435752 = CARTESIAN_POINT('',(127.078822,-117.478974,1.585)); +#435753 = VECTOR('',#435754,1.); +#435754 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#435755 = ORIENTED_EDGE('',*,*,#435756,.T.); +#435756 = EDGE_CURVE('',#435749,#435757,#435759,.T.); +#435757 = VERTEX_POINT('',#435758); +#435758 = CARTESIAN_POINT('',(127.142248,-117.036106,1.585)); +#435759 = LINE('',#435760,#435761); +#435760 = CARTESIAN_POINT('',(127.080044,-117.158819,1.585)); +#435761 = VECTOR('',#435762,1.); +#435762 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#435763 = ORIENTED_EDGE('',*,*,#435764,.T.); +#435764 = EDGE_CURVE('',#435757,#435696,#435765,.T.); +#435765 = LINE('',#435766,#435767); +#435766 = CARTESIAN_POINT('',(127.142248,-117.036106,1.585)); +#435767 = VECTOR('',#435768,1.); +#435768 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#435769 = FACE_BOUND('',#435770,.F.); +#435770 = EDGE_LOOP('',(#435771,#435782,#435790,#435798,#435807,#435815, + #435824,#435832,#435840)); +#435771 = ORIENTED_EDGE('',*,*,#435772,.T.); +#435772 = EDGE_CURVE('',#435773,#435775,#435777,.T.); +#435773 = VERTEX_POINT('',#435774); +#435774 = CARTESIAN_POINT('',(127.536525,-117.09741,1.585)); +#435775 = VERTEX_POINT('',#435776); +#435776 = CARTESIAN_POINT('',(127.261639,-117.127817,1.585)); +#435777 = CIRCLE('',#435778,0.198386215365); +#435778 = AXIS2_PLACEMENT_3D('',#435779,#435780,#435781); +#435779 = CARTESIAN_POINT('',(127.41472195783,-117.2540021753,1.585)); +#435780 = DIRECTION('',(0.,0.,1.)); +#435781 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#435782 = ORIENTED_EDGE('',*,*,#435783,.T.); +#435783 = EDGE_CURVE('',#435775,#435784,#435786,.T.); +#435784 = VERTEX_POINT('',#435785); +#435785 = CARTESIAN_POINT('',(127.227381,-117.196333,1.585)); +#435786 = LINE('',#435787,#435788); +#435787 = CARTESIAN_POINT('',(127.261639,-117.127817,1.585)); +#435788 = VECTOR('',#435789,1.); +#435789 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#435790 = ORIENTED_EDGE('',*,*,#435791,.T.); +#435791 = EDGE_CURVE('',#435784,#435792,#435794,.T.); +#435792 = VERTEX_POINT('',#435793); +#435793 = CARTESIAN_POINT('',(127.227381,-117.446637,1.585)); +#435794 = LINE('',#435795,#435796); +#435795 = CARTESIAN_POINT('',(127.227381,-117.196333,1.585)); +#435796 = VECTOR('',#435797,1.); +#435797 = DIRECTION('',(0.,-1.,0.)); +#435798 = ORIENTED_EDGE('',*,*,#435799,.T.); +#435799 = EDGE_CURVE('',#435792,#435800,#435802,.T.); +#435800 = VERTEX_POINT('',#435801); +#435801 = CARTESIAN_POINT('',(127.360562,-117.579819,1.585)); +#435802 = CIRCLE('',#435803,0.186867373533); +#435803 = AXIS2_PLACEMENT_3D('',#435804,#435805,#435806); +#435804 = CARTESIAN_POINT('',(127.40810071388,-117.399099643,1.585)); +#435805 = DIRECTION('',(0.,0.,1.)); +#435806 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#435807 = ORIENTED_EDGE('',*,*,#435808,.T.); +#435808 = EDGE_CURVE('',#435800,#435809,#435811,.T.); +#435809 = VERTEX_POINT('',#435810); +#435810 = CARTESIAN_POINT('',(127.468009,-117.579819,1.585)); +#435811 = LINE('',#435812,#435813); +#435812 = CARTESIAN_POINT('',(127.360562,-117.579819,1.585)); +#435813 = VECTOR('',#435814,1.); +#435814 = DIRECTION('',(1.,0.,0.)); +#435815 = ORIENTED_EDGE('',*,*,#435816,.T.); +#435816 = EDGE_CURVE('',#435809,#435817,#435819,.T.); +#435817 = VERTEX_POINT('',#435818); +#435818 = CARTESIAN_POINT('',(127.60119,-117.446637,1.585)); +#435819 = CIRCLE('',#435820,0.186867760544); +#435820 = AXIS2_PLACEMENT_3D('',#435821,#435822,#435823); +#435821 = CARTESIAN_POINT('',(127.42046996928,-117.3990993262,1.585)); +#435822 = DIRECTION('',(0.,0.,1.)); +#435823 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#435824 = ORIENTED_EDGE('',*,*,#435825,.T.); +#435825 = EDGE_CURVE('',#435817,#435826,#435828,.T.); +#435826 = VERTEX_POINT('',#435827); +#435827 = CARTESIAN_POINT('',(127.60119,-117.196333,1.585)); +#435828 = LINE('',#435829,#435830); +#435829 = CARTESIAN_POINT('',(127.60119,-117.446637,1.585)); +#435830 = VECTOR('',#435831,1.); +#435831 = DIRECTION('',(0.,1.,0.)); +#435832 = ORIENTED_EDGE('',*,*,#435833,.T.); +#435833 = EDGE_CURVE('',#435826,#435834,#435836,.T.); +#435834 = VERTEX_POINT('',#435835); +#435835 = CARTESIAN_POINT('',(127.566932,-117.127817,1.585)); +#435836 = LINE('',#435837,#435838); +#435837 = CARTESIAN_POINT('',(127.60119,-117.196333,1.585)); +#435838 = VECTOR('',#435839,1.); +#435839 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#435840 = ORIENTED_EDGE('',*,*,#435841,.T.); +#435841 = EDGE_CURVE('',#435834,#435773,#435842,.T.); +#435842 = LINE('',#435843,#435844); +#435843 = CARTESIAN_POINT('',(127.566932,-117.127817,1.585)); +#435844 = VECTOR('',#435845,1.); +#435845 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#435846 = PLANE('',#435847); +#435847 = AXIS2_PLACEMENT_3D('',#435848,#435849,#435850); +#435848 = CARTESIAN_POINT('',(0.,0.,1.585)); +#435849 = DIRECTION('',(0.,0.,1.)); +#435850 = DIRECTION('',(1.,0.,-0.)); +#435851 = SHELL_BASED_SURFACE_MODEL('',(#435852)); +#435852 = OPEN_SHELL('',(#435853)); +#435853 = ADVANCED_FACE('',(#435854),#436012,.T.); +#435854 = FACE_BOUND('',#435855,.F.); +#435855 = EDGE_LOOP('',(#435856,#435867,#435875,#435883,#435891,#435899, + #435908,#435916,#435925,#435933,#435941,#435949,#435957,#435965, + #435973,#435981,#435990,#435998,#436006)); +#435856 = ORIENTED_EDGE('',*,*,#435857,.T.); +#435857 = EDGE_CURVE('',#435858,#435860,#435862,.T.); +#435858 = VERTEX_POINT('',#435859); +#435859 = CARTESIAN_POINT('',(128.063094,-116.925792,1.585)); +#435860 = VERTEX_POINT('',#435861); +#435861 = CARTESIAN_POINT('',(128.165831,-116.945193,1.585)); +#435862 = CIRCLE('',#435863,7.440760172324E-02); +#435863 = AXIS2_PLACEMENT_3D('',#435864,#435865,#435866); +#435864 = CARTESIAN_POINT('',(128.10463706572,-116.987522583,1.585)); +#435865 = DIRECTION('',(0.,0.,-1.)); +#435866 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#435867 = ORIENTED_EDGE('',*,*,#435868,.T.); +#435868 = EDGE_CURVE('',#435860,#435869,#435871,.T.); +#435869 = VERTEX_POINT('',#435870); +#435870 = CARTESIAN_POINT('',(128.232987,-116.914593,1.585)); +#435871 = LINE('',#435872,#435873); +#435872 = CARTESIAN_POINT('',(128.165831,-116.945193,1.585)); +#435873 = VECTOR('',#435874,1.); +#435874 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#435875 = ORIENTED_EDGE('',*,*,#435876,.T.); +#435876 = EDGE_CURVE('',#435869,#435877,#435879,.T.); +#435877 = VERTEX_POINT('',#435878); +#435878 = CARTESIAN_POINT('',(128.405108,-116.914593,1.585)); +#435879 = LINE('',#435880,#435881); +#435880 = CARTESIAN_POINT('',(128.232987,-116.914593,1.585)); +#435881 = VECTOR('',#435882,1.); +#435882 = DIRECTION('',(1.,0.,0.)); +#435883 = ORIENTED_EDGE('',*,*,#435884,.T.); +#435884 = EDGE_CURVE('',#435877,#435885,#435887,.T.); +#435885 = VERTEX_POINT('',#435886); +#435886 = CARTESIAN_POINT('',(128.531698,-116.976521,1.585)); +#435887 = LINE('',#435888,#435889); +#435888 = CARTESIAN_POINT('',(128.405108,-116.914593,1.585)); +#435889 = VECTOR('',#435890,1.); +#435890 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#435891 = ORIENTED_EDGE('',*,*,#435892,.T.); +#435892 = EDGE_CURVE('',#435885,#435893,#435895,.T.); +#435893 = VERTEX_POINT('',#435894); +#435894 = CARTESIAN_POINT('',(128.552796,-117.00223,1.585)); +#435895 = LINE('',#435896,#435897); +#435896 = CARTESIAN_POINT('',(128.531698,-116.976521,1.585)); +#435897 = VECTOR('',#435898,1.); +#435898 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#435899 = ORIENTED_EDGE('',*,*,#435900,.T.); +#435900 = EDGE_CURVE('',#435893,#435901,#435903,.T.); +#435901 = VERTEX_POINT('',#435902); +#435902 = CARTESIAN_POINT('',(128.595693,-117.696487,1.585)); +#435903 = CIRCLE('',#435904,0.780466291445); +#435904 = AXIS2_PLACEMENT_3D('',#435905,#435906,#435907); +#435905 = CARTESIAN_POINT('',(127.8768832213,-117.3924473082,1.585)); +#435906 = DIRECTION('',(0.,0.,-1.)); +#435907 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#435908 = ORIENTED_EDGE('',*,*,#435909,.T.); +#435909 = EDGE_CURVE('',#435901,#435910,#435912,.T.); +#435910 = VERTEX_POINT('',#435911); +#435911 = CARTESIAN_POINT('',(128.575001,-117.717179,1.585)); +#435912 = LINE('',#435913,#435914); +#435913 = CARTESIAN_POINT('',(128.595693,-117.696487,1.585)); +#435914 = VECTOR('',#435915,1.); +#435915 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#435916 = ORIENTED_EDGE('',*,*,#435917,.T.); +#435917 = EDGE_CURVE('',#435910,#435918,#435920,.T.); +#435918 = VERTEX_POINT('',#435919); +#435919 = CARTESIAN_POINT('',(128.458333,-117.654819,1.585)); +#435920 = CIRCLE('',#435921,7.49997958033E-02); +#435921 = AXIS2_PLACEMENT_3D('',#435922,#435923,#435924); +#435922 = CARTESIAN_POINT('',(128.5333327958,-117.6548193164,1.585)); +#435923 = DIRECTION('',(-0.,0.,-1.)); +#435924 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#435925 = ORIENTED_EDGE('',*,*,#435926,.T.); +#435926 = EDGE_CURVE('',#435918,#435927,#435929,.T.); +#435927 = VERTEX_POINT('',#435928); +#435928 = CARTESIAN_POINT('',(128.458333,-117.148714,1.585)); +#435929 = LINE('',#435930,#435931); +#435930 = CARTESIAN_POINT('',(128.458333,-117.654819,1.585)); +#435931 = VECTOR('',#435932,1.); +#435932 = DIRECTION('',(0.,1.,0.)); +#435933 = ORIENTED_EDGE('',*,*,#435934,.T.); +#435934 = EDGE_CURVE('',#435927,#435935,#435937,.T.); +#435935 = VERTEX_POINT('',#435936); +#435936 = CARTESIAN_POINT('',(128.429812,-117.091672,1.585)); +#435937 = LINE('',#435938,#435939); +#435938 = CARTESIAN_POINT('',(128.458333,-117.148714,1.585)); +#435939 = VECTOR('',#435940,1.); +#435940 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#435941 = ORIENTED_EDGE('',*,*,#435942,.T.); +#435942 = EDGE_CURVE('',#435935,#435943,#435945,.T.); +#435943 = VERTEX_POINT('',#435944); +#435944 = CARTESIAN_POINT('',(128.372771,-117.063152,1.585)); +#435945 = LINE('',#435946,#435947); +#435946 = CARTESIAN_POINT('',(128.429812,-117.091672,1.585)); +#435947 = VECTOR('',#435948,1.); +#435948 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#435949 = ORIENTED_EDGE('',*,*,#435950,.T.); +#435950 = EDGE_CURVE('',#435943,#435951,#435953,.T.); +#435951 = VERTEX_POINT('',#435952); +#435952 = CARTESIAN_POINT('',(128.265324,-117.063152,1.585)); +#435953 = LINE('',#435954,#435955); +#435954 = CARTESIAN_POINT('',(128.372771,-117.063152,1.585)); +#435955 = VECTOR('',#435956,1.); +#435956 = DIRECTION('',(-1.,0.,0.)); +#435957 = ORIENTED_EDGE('',*,*,#435958,.T.); +#435958 = EDGE_CURVE('',#435951,#435959,#435961,.T.); +#435959 = VERTEX_POINT('',#435960); +#435960 = CARTESIAN_POINT('',(128.196808,-117.09741,1.585)); +#435961 = LINE('',#435962,#435963); +#435962 = CARTESIAN_POINT('',(128.265324,-117.063152,1.585)); +#435963 = VECTOR('',#435964,1.); +#435964 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#435965 = ORIENTED_EDGE('',*,*,#435966,.T.); +#435966 = EDGE_CURVE('',#435959,#435967,#435969,.T.); +#435967 = VERTEX_POINT('',#435968); +#435968 = CARTESIAN_POINT('',(128.179762,-117.114456,1.585)); +#435969 = LINE('',#435970,#435971); +#435970 = CARTESIAN_POINT('',(128.196808,-117.09741,1.585)); +#435971 = VECTOR('',#435972,1.); +#435972 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#435973 = ORIENTED_EDGE('',*,*,#435974,.T.); +#435974 = EDGE_CURVE('',#435967,#435975,#435977,.T.); +#435975 = VERTEX_POINT('',#435976); +#435976 = CARTESIAN_POINT('',(128.178321,-117.669451,1.585)); +#435977 = LINE('',#435978,#435979); +#435978 = CARTESIAN_POINT('',(128.179762,-117.114456,1.585)); +#435979 = VECTOR('',#435980,1.); +#435980 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#435981 = ORIENTED_EDGE('',*,*,#435982,.T.); +#435982 = EDGE_CURVE('',#435975,#435983,#435985,.T.); +#435983 = VERTEX_POINT('',#435984); +#435984 = CARTESIAN_POINT('',(128.029762,-117.654819,1.585)); +#435985 = CIRCLE('',#435986,7.500006711464E-02); +#435986 = AXIS2_PLACEMENT_3D('',#435987,#435988,#435989); +#435987 = CARTESIAN_POINT('',(128.10476206711,-117.6548190671,1.585)); +#435988 = DIRECTION('',(-0.,0.,-1.)); +#435989 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#435990 = ORIENTED_EDGE('',*,*,#435991,.T.); +#435991 = EDGE_CURVE('',#435983,#435992,#435994,.T.); +#435992 = VERTEX_POINT('',#435993); +#435993 = CARTESIAN_POINT('',(128.031203,-116.97352,1.585)); +#435994 = LINE('',#435995,#435996); +#435995 = CARTESIAN_POINT('',(128.029762,-117.654819,1.585)); +#435996 = VECTOR('',#435997,1.); +#435997 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#435998 = ORIENTED_EDGE('',*,*,#435999,.T.); +#435999 = EDGE_CURVE('',#435992,#436000,#436002,.T.); +#436000 = VERTEX_POINT('',#436001); +#436001 = CARTESIAN_POINT('',(128.042402,-116.946484,1.585)); +#436002 = LINE('',#436003,#436004); +#436003 = CARTESIAN_POINT('',(128.031203,-116.97352,1.585)); +#436004 = VECTOR('',#436005,1.); +#436005 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#436006 = ORIENTED_EDGE('',*,*,#436007,.T.); +#436007 = EDGE_CURVE('',#436000,#435858,#436008,.T.); +#436008 = LINE('',#436009,#436010); +#436009 = CARTESIAN_POINT('',(128.042402,-116.946484,1.585)); +#436010 = VECTOR('',#436011,1.); +#436011 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#436012 = PLANE('',#436013); +#436013 = AXIS2_PLACEMENT_3D('',#436014,#436015,#436016); +#436014 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436015 = DIRECTION('',(0.,0.,1.)); +#436016 = DIRECTION('',(1.,0.,-0.)); +#436017 = SHELL_BASED_SURFACE_MODEL('',(#436018)); +#436018 = OPEN_SHELL('',(#436019)); +#436019 = ADVANCED_FACE('',(#436020),#436155,.T.); +#436020 = FACE_BOUND('',#436021,.F.); +#436021 = EDGE_LOOP('',(#436022,#436033,#436041,#436049,#436057,#436066, + #436074,#436082,#436091,#436099,#436107,#436116,#436124,#436132, + #436141,#436149)); +#436022 = ORIENTED_EDGE('',*,*,#436023,.T.); +#436023 = EDGE_CURVE('',#436024,#436026,#436028,.T.); +#436024 = VERTEX_POINT('',#436025); +#436025 = CARTESIAN_POINT('',(129.915922,-116.547951,1.585)); +#436026 = VERTEX_POINT('',#436027); +#436027 = CARTESIAN_POINT('',(130.033056,-116.630918,1.585)); +#436028 = CIRCLE('',#436029,7.499955990671E-02); +#436029 = AXIS2_PLACEMENT_3D('',#436030,#436031,#436032); +#436030 = CARTESIAN_POINT('',(129.96190550095,-116.6072000643,1.585)); +#436031 = DIRECTION('',(0.,0.,-1.)); +#436032 = DIRECTION('',(-0.613116943749,0.78999216027,0.)); +#436033 = ORIENTED_EDGE('',*,*,#436034,.T.); +#436034 = EDGE_CURVE('',#436026,#436035,#436037,.T.); +#436035 = VERTEX_POINT('',#436036); +#436036 = CARTESIAN_POINT('',(129.827867,-117.246485,1.585)); +#436037 = LINE('',#436038,#436039); +#436038 = CARTESIAN_POINT('',(130.033056,-116.630918,1.585)); +#436039 = VECTOR('',#436040,1.); +#436040 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#436041 = ORIENTED_EDGE('',*,*,#436042,.T.); +#436042 = EDGE_CURVE('',#436035,#436043,#436045,.T.); +#436043 = VERTEX_POINT('',#436044); +#436044 = CARTESIAN_POINT('',(130.125,-117.246485,1.585)); +#436045 = LINE('',#436046,#436047); +#436046 = CARTESIAN_POINT('',(129.827867,-117.246485,1.585)); +#436047 = VECTOR('',#436048,1.); +#436048 = DIRECTION('',(1.,0.,0.)); +#436049 = ORIENTED_EDGE('',*,*,#436050,.T.); +#436050 = EDGE_CURVE('',#436043,#436051,#436053,.T.); +#436051 = VERTEX_POINT('',#436052); +#436052 = CARTESIAN_POINT('',(130.126441,-116.97352,1.585)); +#436053 = LINE('',#436054,#436055); +#436054 = CARTESIAN_POINT('',(130.125,-117.246485,1.585)); +#436055 = VECTOR('',#436056,1.); +#436056 = DIRECTION('',(5.278991523253E-03,0.999986066027,0.)); +#436057 = ORIENTED_EDGE('',*,*,#436058,.T.); +#436058 = EDGE_CURVE('',#436051,#436059,#436061,.T.); +#436059 = VERTEX_POINT('',#436060); +#436060 = CARTESIAN_POINT('',(130.275,-116.988152,1.585)); +#436061 = CIRCLE('',#436062,7.500006711463E-02); +#436062 = AXIS2_PLACEMENT_3D('',#436063,#436064,#436065); +#436063 = CARTESIAN_POINT('',(130.19999993288,-116.9881519328,1.585)); +#436064 = DIRECTION('',(0.,0.,-1.)); +#436065 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#436066 = ORIENTED_EDGE('',*,*,#436067,.T.); +#436067 = EDGE_CURVE('',#436059,#436068,#436070,.T.); +#436068 = VERTEX_POINT('',#436069); +#436069 = CARTESIAN_POINT('',(130.275,-117.246485,1.585)); +#436070 = LINE('',#436071,#436072); +#436071 = CARTESIAN_POINT('',(130.275,-116.988152,1.585)); +#436072 = VECTOR('',#436073,1.); +#436073 = DIRECTION('',(0.,-1.,0.)); +#436074 = ORIENTED_EDGE('',*,*,#436075,.T.); +#436075 = EDGE_CURVE('',#436068,#436076,#436078,.T.); +#436076 = VERTEX_POINT('',#436077); +#436077 = CARTESIAN_POINT('',(130.357489,-117.247926,1.585)); +#436078 = LINE('',#436079,#436080); +#436079 = CARTESIAN_POINT('',(130.275,-117.246485,1.585)); +#436080 = VECTOR('',#436081,1.); +#436081 = DIRECTION('',(0.999847452005,-1.746633100583E-02,0.)); +#436082 = ORIENTED_EDGE('',*,*,#436083,.T.); +#436083 = EDGE_CURVE('',#436076,#436084,#436086,.T.); +#436084 = VERTEX_POINT('',#436085); +#436085 = CARTESIAN_POINT('',(130.342857,-117.396485,1.585)); +#436086 = CIRCLE('',#436087,7.500006711463E-02); +#436087 = AXIS2_PLACEMENT_3D('',#436088,#436089,#436090); +#436088 = CARTESIAN_POINT('',(130.34285706711,-117.3214849328,1.585)); +#436089 = DIRECTION('',(0.,0.,-1.)); +#436090 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#436091 = ORIENTED_EDGE('',*,*,#436092,.T.); +#436092 = EDGE_CURVE('',#436084,#436093,#436095,.T.); +#436093 = VERTEX_POINT('',#436094); +#436094 = CARTESIAN_POINT('',(130.275,-117.396485,1.585)); +#436095 = LINE('',#436096,#436097); +#436096 = CARTESIAN_POINT('',(130.342857,-117.396485,1.585)); +#436097 = VECTOR('',#436098,1.); +#436098 = DIRECTION('',(-1.,0.,0.)); +#436099 = ORIENTED_EDGE('',*,*,#436100,.T.); +#436100 = EDGE_CURVE('',#436093,#436101,#436103,.T.); +#436101 = VERTEX_POINT('',#436102); +#436102 = CARTESIAN_POINT('',(130.273559,-117.669451,1.585)); +#436103 = LINE('',#436104,#436105); +#436104 = CARTESIAN_POINT('',(130.275,-117.396485,1.585)); +#436105 = VECTOR('',#436106,1.); +#436106 = DIRECTION('',(-5.278972184419E-03,-0.999986066129,0.)); +#436107 = ORIENTED_EDGE('',*,*,#436108,.T.); +#436108 = EDGE_CURVE('',#436101,#436109,#436111,.T.); +#436109 = VERTEX_POINT('',#436110); +#436110 = CARTESIAN_POINT('',(130.125,-117.654819,1.585)); +#436111 = CIRCLE('',#436112,7.500006711464E-02); +#436112 = AXIS2_PLACEMENT_3D('',#436113,#436114,#436115); +#436113 = CARTESIAN_POINT('',(130.20000006711,-117.6548190671,1.585)); +#436114 = DIRECTION('',(-0.,0.,-1.)); +#436115 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#436116 = ORIENTED_EDGE('',*,*,#436117,.T.); +#436117 = EDGE_CURVE('',#436109,#436118,#436120,.T.); +#436118 = VERTEX_POINT('',#436119); +#436119 = CARTESIAN_POINT('',(130.125,-117.396485,1.585)); +#436120 = LINE('',#436121,#436122); +#436121 = CARTESIAN_POINT('',(130.125,-117.654819,1.585)); +#436122 = VECTOR('',#436123,1.); +#436123 = DIRECTION('',(0.,1.,0.)); +#436124 = ORIENTED_EDGE('',*,*,#436125,.T.); +#436125 = EDGE_CURVE('',#436118,#436126,#436128,.T.); +#436126 = VERTEX_POINT('',#436127); +#436127 = CARTESIAN_POINT('',(129.709178,-117.395044,1.585)); +#436128 = LINE('',#436129,#436130); +#436129 = CARTESIAN_POINT('',(130.125,-117.396485,1.585)); +#436130 = VECTOR('',#436131,1.); +#436131 = DIRECTION('',(-0.999993995468,3.465404301528E-03,0.)); +#436132 = ORIENTED_EDGE('',*,*,#436133,.T.); +#436133 = EDGE_CURVE('',#436126,#436134,#436136,.T.); +#436134 = VERTEX_POINT('',#436135); +#436135 = CARTESIAN_POINT('',(129.652659,-117.297768,1.585)); +#436136 = CIRCLE('',#436137,7.499997045038E-02); +#436137 = AXIS2_PLACEMENT_3D('',#436138,#436139,#436140); +#436138 = CARTESIAN_POINT('',(129.72381017257,-117.3214852133,1.585)); +#436139 = DIRECTION('',(0.,0.,-1.)); +#436140 = DIRECTION('',(-0.195095711168,-0.980784208419,-0.)); +#436141 = ORIENTED_EDGE('',*,*,#436142,.T.); +#436142 = EDGE_CURVE('',#436134,#436143,#436145,.T.); +#436143 = VERTEX_POINT('',#436144); +#436144 = CARTESIAN_POINT('',(129.896748,-116.570058,1.585)); +#436145 = LINE('',#436146,#436147); +#436146 = CARTESIAN_POINT('',(129.652659,-117.297768,1.585)); +#436147 = VECTOR('',#436148,1.); +#436148 = DIRECTION('',(0.318008317924,0.948087922996,0.)); +#436149 = ORIENTED_EDGE('',*,*,#436150,.T.); +#436150 = EDGE_CURVE('',#436143,#436024,#436151,.T.); +#436151 = LINE('',#436152,#436153); +#436152 = CARTESIAN_POINT('',(129.896748,-116.570058,1.585)); +#436153 = VECTOR('',#436154,1.); +#436154 = DIRECTION('',(0.65521540373,0.755442105469,0.)); +#436155 = PLANE('',#436156); +#436156 = AXIS2_PLACEMENT_3D('',#436157,#436158,#436159); +#436157 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436158 = DIRECTION('',(0.,0.,1.)); +#436159 = DIRECTION('',(1.,0.,-0.)); +#436160 = SHELL_BASED_SURFACE_MODEL('',(#436161)); +#436161 = OPEN_SHELL('',(#436162)); +#436162 = ADVANCED_FACE('',(#436163,#436281,#436348),#436400,.T.); +#436163 = FACE_BOUND('',#436164,.F.); +#436164 = EDGE_LOOP('',(#436165,#436176,#436184,#436193,#436201,#436209, + #436217,#436225,#436233,#436242,#436250,#436259,#436267,#436275)); +#436165 = ORIENTED_EDGE('',*,*,#436166,.T.); +#436166 = EDGE_CURVE('',#436167,#436169,#436171,.T.); +#436167 = VERTEX_POINT('',#436168); +#436168 = CARTESIAN_POINT('',(134.378821,-116.640187,1.585)); +#436169 = VERTEX_POINT('',#436170); +#436170 = CARTESIAN_POINT('',(134.45238,-116.579819,1.585)); +#436171 = CIRCLE('',#436172,7.500074938988E-02); +#436172 = AXIS2_PLACEMENT_3D('',#436173,#436174,#436175); +#436173 = CARTESIAN_POINT('',(134.45238046611,-116.6548197493,1.585)); +#436174 = DIRECTION('',(0.,0.,-1.)); +#436175 = DIRECTION('',(-0.980783081614,0.195101375752,0.)); +#436176 = ORIENTED_EDGE('',*,*,#436177,.T.); +#436177 = EDGE_CURVE('',#436169,#436178,#436180,.T.); +#436178 = VERTEX_POINT('',#436179); +#436179 = CARTESIAN_POINT('',(134.800345,-116.58126,1.585)); +#436180 = LINE('',#436181,#436182); +#436181 = CARTESIAN_POINT('',(134.45238,-116.579819,1.585)); +#436182 = VECTOR('',#436183,1.); +#436183 = DIRECTION('',(0.999991425254,-4.141185589905E-03,0.)); +#436184 = ORIENTED_EDGE('',*,*,#436185,.T.); +#436185 = EDGE_CURVE('',#436178,#436186,#436188,.T.); +#436186 = VERTEX_POINT('',#436187); +#436187 = CARTESIAN_POINT('',(135.049748,-116.830663,1.585)); +#436188 = CIRCLE('',#436189,0.347870264855); +#436189 = AXIS2_PLACEMENT_3D('',#436190,#436191,#436192); +#436190 = CARTESIAN_POINT('',(134.71301726502,-116.9179907349,1.585)); +#436191 = DIRECTION('',(0.,0.,-1.)); +#436192 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#436193 = ORIENTED_EDGE('',*,*,#436194,.T.); +#436194 = EDGE_CURVE('',#436186,#436195,#436197,.T.); +#436195 = VERTEX_POINT('',#436196); +#436196 = CARTESIAN_POINT('',(135.048526,-116.960343,1.585)); +#436197 = LINE('',#436198,#436199); +#436198 = CARTESIAN_POINT('',(135.049748,-116.830663,1.585)); +#436199 = VECTOR('',#436200,1.); +#436200 = DIRECTION('',(-9.422777212105E-03,-0.999955604649,0.)); +#436201 = ORIENTED_EDGE('',*,*,#436202,.T.); +#436202 = EDGE_CURVE('',#436195,#436203,#436205,.T.); +#436203 = VERTEX_POINT('',#436204); +#436204 = CARTESIAN_POINT('',(134.986321,-117.083054,1.585)); +#436205 = LINE('',#436206,#436207); +#436206 = CARTESIAN_POINT('',(135.048526,-116.960343,1.585)); +#436207 = VECTOR('',#436208,1.); +#436208 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#436209 = ORIENTED_EDGE('',*,*,#436210,.T.); +#436210 = EDGE_CURVE('',#436203,#436211,#436213,.T.); +#436211 = VERTEX_POINT('',#436212); +#436212 = CARTESIAN_POINT('',(134.959644,-117.110762,1.585)); +#436213 = LINE('',#436214,#436215); +#436214 = CARTESIAN_POINT('',(134.986321,-117.083054,1.585)); +#436215 = VECTOR('',#436216,1.); +#436216 = DIRECTION('',(-0.693577232498,-0.720382275295,0.)); +#436217 = ORIENTED_EDGE('',*,*,#436218,.T.); +#436218 = EDGE_CURVE('',#436211,#436219,#436221,.T.); +#436219 = VERTEX_POINT('',#436220); +#436220 = CARTESIAN_POINT('',(134.981603,-117.125595,1.585)); +#436221 = LINE('',#436222,#436223); +#436222 = CARTESIAN_POINT('',(134.959644,-117.110762,1.585)); +#436223 = VECTOR('',#436224,1.); +#436224 = DIRECTION('',(0.82866182355,-0.559749570961,0.)); +#436225 = ORIENTED_EDGE('',*,*,#436226,.T.); +#436226 = EDGE_CURVE('',#436219,#436227,#436229,.T.); +#436227 = VERTEX_POINT('',#436228); +#436228 = CARTESIAN_POINT('',(135.043271,-117.192706,1.585)); +#436229 = LINE('',#436230,#436231); +#436230 = CARTESIAN_POINT('',(134.981603,-117.125595,1.585)); +#436231 = VECTOR('',#436232,1.); +#436232 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#436233 = ORIENTED_EDGE('',*,*,#436234,.T.); +#436234 = EDGE_CURVE('',#436227,#436235,#436237,.T.); +#436235 = VERTEX_POINT('',#436236); +#436236 = CARTESIAN_POINT('',(135.03394,-117.606863,1.585)); +#436237 = CIRCLE('',#436238,0.341850333486); +#436238 = AXIS2_PLACEMENT_3D('',#436239,#436240,#436241); +#436239 = CARTESIAN_POINT('',(134.76672159864,-117.3936589276,1.585)); +#436240 = DIRECTION('',(0.,0.,-1.)); +#436241 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#436242 = ORIENTED_EDGE('',*,*,#436243,.T.); +#436243 = EDGE_CURVE('',#436235,#436244,#436246,.T.); +#436244 = VERTEX_POINT('',#436245); +#436245 = CARTESIAN_POINT('',(134.96841,-117.670317,1.585)); +#436246 = LINE('',#436247,#436248); +#436247 = CARTESIAN_POINT('',(135.03394,-117.606863,1.585)); +#436248 = VECTOR('',#436249,1.); +#436249 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#436250 = ORIENTED_EDGE('',*,*,#436251,.T.); +#436251 = EDGE_CURVE('',#436244,#436252,#436254,.T.); +#436252 = VERTEX_POINT('',#436253); +#436253 = CARTESIAN_POINT('',(134.410712,-117.717179,1.585)); +#436254 = CIRCLE('',#436255,0.612118292739); +#436255 = AXIS2_PLACEMENT_3D('',#436256,#436257,#436258); +#436256 = CARTESIAN_POINT('',(134.64397614383,-117.1512491072,1.585)); +#436257 = DIRECTION('',(-0.,0.,-1.)); +#436258 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#436259 = ORIENTED_EDGE('',*,*,#436260,.T.); +#436260 = EDGE_CURVE('',#436252,#436261,#436263,.T.); +#436261 = VERTEX_POINT('',#436262); +#436262 = CARTESIAN_POINT('',(134.39002,-117.696487,1.585)); +#436263 = LINE('',#436264,#436265); +#436264 = CARTESIAN_POINT('',(134.410712,-117.717179,1.585)); +#436265 = VECTOR('',#436266,1.); +#436266 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#436267 = ORIENTED_EDGE('',*,*,#436268,.T.); +#436268 = EDGE_CURVE('',#436261,#436269,#436271,.T.); +#436269 = VERTEX_POINT('',#436270); +#436270 = CARTESIAN_POINT('',(134.37738,-117.654819,1.585)); +#436271 = LINE('',#436272,#436273); +#436272 = CARTESIAN_POINT('',(134.39002,-117.696487,1.585)); +#436273 = VECTOR('',#436274,1.); +#436274 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#436275 = ORIENTED_EDGE('',*,*,#436276,.T.); +#436276 = EDGE_CURVE('',#436269,#436167,#436277,.T.); +#436277 = LINE('',#436278,#436279); +#436278 = CARTESIAN_POINT('',(134.37738,-117.654819,1.585)); +#436279 = VECTOR('',#436280,1.); +#436280 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#436281 = FACE_BOUND('',#436282,.F.); +#436282 = EDGE_LOOP('',(#436283,#436293,#436301,#436309,#436317,#436326, + #436334,#436342)); +#436283 = ORIENTED_EDGE('',*,*,#436284,.T.); +#436284 = EDGE_CURVE('',#436285,#436287,#436289,.T.); +#436285 = VERTEX_POINT('',#436286); +#436286 = CARTESIAN_POINT('',(134.888056,-117.24418,1.585)); +#436287 = VERTEX_POINT('',#436288); +#436288 = CARTESIAN_POINT('',(134.773543,-117.206009,1.585)); +#436289 = LINE('',#436290,#436291); +#436290 = CARTESIAN_POINT('',(134.888056,-117.24418,1.585)); +#436291 = VECTOR('',#436292,1.); +#436292 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#436293 = ORIENTED_EDGE('',*,*,#436294,.T.); +#436294 = EDGE_CURVE('',#436287,#436295,#436297,.T.); +#436295 = VERTEX_POINT('',#436296); +#436296 = CARTESIAN_POINT('',(134.52738,-117.206009,1.585)); +#436297 = LINE('',#436298,#436299); +#436298 = CARTESIAN_POINT('',(134.773543,-117.206009,1.585)); +#436299 = VECTOR('',#436300,1.); +#436300 = DIRECTION('',(-1.,0.,0.)); +#436301 = ORIENTED_EDGE('',*,*,#436302,.T.); +#436302 = EDGE_CURVE('',#436295,#436303,#436305,.T.); +#436303 = VERTEX_POINT('',#436304); +#436304 = CARTESIAN_POINT('',(134.52738,-117.579819,1.585)); +#436305 = LINE('',#436306,#436307); +#436306 = CARTESIAN_POINT('',(134.52738,-117.206009,1.585)); +#436307 = VECTOR('',#436308,1.); +#436308 = DIRECTION('',(0.,-1.,0.)); +#436309 = ORIENTED_EDGE('',*,*,#436310,.T.); +#436310 = EDGE_CURVE('',#436303,#436311,#436313,.T.); +#436311 = VERTEX_POINT('',#436312); +#436312 = CARTESIAN_POINT('',(134.815627,-117.579819,1.585)); +#436313 = LINE('',#436314,#436315); +#436314 = CARTESIAN_POINT('',(134.52738,-117.579819,1.585)); +#436315 = VECTOR('',#436316,1.); +#436316 = DIRECTION('',(1.,0.,0.)); +#436317 = ORIENTED_EDGE('',*,*,#436318,.T.); +#436318 = EDGE_CURVE('',#436311,#436319,#436321,.T.); +#436319 = VERTEX_POINT('',#436320); +#436320 = CARTESIAN_POINT('',(134.948808,-117.446637,1.585)); +#436321 = CIRCLE('',#436322,0.186867760544); +#436322 = AXIS2_PLACEMENT_3D('',#436323,#436324,#436325); +#436323 = CARTESIAN_POINT('',(134.76808796928,-117.3990993262,1.585)); +#436324 = DIRECTION('',(0.,0.,1.)); +#436325 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#436326 = ORIENTED_EDGE('',*,*,#436327,.T.); +#436327 = EDGE_CURVE('',#436319,#436328,#436330,.T.); +#436328 = VERTEX_POINT('',#436329); +#436329 = CARTESIAN_POINT('',(134.948808,-117.33919,1.585)); +#436330 = LINE('',#436331,#436332); +#436331 = CARTESIAN_POINT('',(134.948808,-117.446637,1.585)); +#436332 = VECTOR('',#436333,1.); +#436333 = DIRECTION('',(0.,1.,0.)); +#436334 = ORIENTED_EDGE('',*,*,#436335,.T.); +#436335 = EDGE_CURVE('',#436328,#436336,#436338,.T.); +#436336 = VERTEX_POINT('',#436337); +#436337 = CARTESIAN_POINT('',(134.91455,-117.270674,1.585)); +#436338 = LINE('',#436339,#436340); +#436339 = CARTESIAN_POINT('',(134.948808,-117.33919,1.585)); +#436340 = VECTOR('',#436341,1.); +#436341 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#436342 = ORIENTED_EDGE('',*,*,#436343,.T.); +#436343 = EDGE_CURVE('',#436336,#436285,#436344,.T.); +#436344 = LINE('',#436345,#436346); +#436345 = CARTESIAN_POINT('',(134.91455,-117.270674,1.585)); +#436346 = VECTOR('',#436347,1.); +#436347 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#436348 = FACE_BOUND('',#436349,.F.); +#436349 = EDGE_LOOP('',(#436350,#436361,#436369,#436377,#436385,#436394) + ); +#436350 = ORIENTED_EDGE('',*,*,#436351,.T.); +#436351 = EDGE_CURVE('',#436352,#436354,#436356,.T.); +#436352 = VERTEX_POINT('',#436353); +#436353 = CARTESIAN_POINT('',(134.901189,-116.863,1.585)); +#436354 = VERTEX_POINT('',#436355); +#436355 = CARTESIAN_POINT('',(134.768008,-116.729819,1.585)); +#436356 = CIRCLE('',#436357,0.18686440374); +#436357 = AXIS2_PLACEMENT_3D('',#436358,#436359,#436360); +#436358 = CARTESIAN_POINT('',(134.720472,-116.910536,1.585)); +#436359 = DIRECTION('',(0.,0.,1.)); +#436360 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#436361 = ORIENTED_EDGE('',*,*,#436362,.T.); +#436362 = EDGE_CURVE('',#436354,#436363,#436365,.T.); +#436363 = VERTEX_POINT('',#436364); +#436364 = CARTESIAN_POINT('',(134.52738,-116.729819,1.585)); +#436365 = LINE('',#436366,#436367); +#436366 = CARTESIAN_POINT('',(134.768008,-116.729819,1.585)); +#436367 = VECTOR('',#436368,1.); +#436368 = DIRECTION('',(-1.,0.,0.)); +#436369 = ORIENTED_EDGE('',*,*,#436370,.T.); +#436370 = EDGE_CURVE('',#436363,#436371,#436373,.T.); +#436371 = VERTEX_POINT('',#436372); +#436372 = CARTESIAN_POINT('',(134.52738,-117.056009,1.585)); +#436373 = LINE('',#436374,#436375); +#436374 = CARTESIAN_POINT('',(134.52738,-116.729819,1.585)); +#436375 = VECTOR('',#436376,1.); +#436376 = DIRECTION('',(0.,-1.,0.)); +#436377 = ORIENTED_EDGE('',*,*,#436378,.T.); +#436378 = EDGE_CURVE('',#436371,#436379,#436381,.T.); +#436379 = VERTEX_POINT('',#436380); +#436380 = CARTESIAN_POINT('',(134.768008,-117.056009,1.585)); +#436381 = LINE('',#436382,#436383); +#436382 = CARTESIAN_POINT('',(134.52738,-117.056009,1.585)); +#436383 = VECTOR('',#436384,1.); +#436384 = DIRECTION('',(1.,0.,0.)); +#436385 = ORIENTED_EDGE('',*,*,#436386,.T.); +#436386 = EDGE_CURVE('',#436379,#436387,#436389,.T.); +#436387 = VERTEX_POINT('',#436388); +#436388 = CARTESIAN_POINT('',(134.901189,-116.922828,1.585)); +#436389 = CIRCLE('',#436390,0.18686440374); +#436390 = AXIS2_PLACEMENT_3D('',#436391,#436392,#436393); +#436391 = CARTESIAN_POINT('',(134.720472,-116.875292,1.585)); +#436392 = DIRECTION('',(0.,0.,1.)); +#436393 = DIRECTION('',(0.254387668538,-0.967102328658,0.)); +#436394 = ORIENTED_EDGE('',*,*,#436395,.T.); +#436395 = EDGE_CURVE('',#436387,#436352,#436396,.T.); +#436396 = LINE('',#436397,#436398); +#436397 = CARTESIAN_POINT('',(134.901189,-116.922828,1.585)); +#436398 = VECTOR('',#436399,1.); +#436399 = DIRECTION('',(0.,1.,0.)); +#436400 = PLANE('',#436401); +#436401 = AXIS2_PLACEMENT_3D('',#436402,#436403,#436404); +#436402 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436403 = DIRECTION('',(0.,0.,1.)); +#436404 = DIRECTION('',(1.,0.,-0.)); +#436405 = SHELL_BASED_SURFACE_MODEL('',(#436406)); +#436406 = OPEN_SHELL('',(#436407)); +#436407 = ADVANCED_FACE('',(#436408),#436550,.T.); +#436408 = FACE_BOUND('',#436409,.F.); +#436409 = EDGE_LOOP('',(#436410,#436421,#436429,#436437,#436445,#436453, + #436461,#436469,#436477,#436486,#436494,#436503,#436511,#436519, + #436527,#436535,#436544)); +#436410 = ORIENTED_EDGE('',*,*,#436411,.T.); +#436411 = EDGE_CURVE('',#436412,#436414,#436416,.T.); +#436412 = VERTEX_POINT('',#436413); +#436413 = CARTESIAN_POINT('',(135.410712,-116.925792,1.585)); +#436414 = VERTEX_POINT('',#436415); +#436415 = CARTESIAN_POINT('',(135.52738,-116.988152,1.585)); +#436416 = CIRCLE('',#436417,7.500000000003E-02); +#436417 = AXIS2_PLACEMENT_3D('',#436418,#436419,#436420); +#436418 = CARTESIAN_POINT('',(135.45238,-116.9881520655,1.585)); +#436419 = DIRECTION('',(0.,0.,-1.)); +#436420 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#436421 = ORIENTED_EDGE('',*,*,#436422,.T.); +#436422 = EDGE_CURVE('',#436414,#436423,#436425,.T.); +#436423 = VERTEX_POINT('',#436424); +#436424 = CARTESIAN_POINT('',(135.52738,-117.494256,1.585)); +#436425 = LINE('',#436426,#436427); +#436426 = CARTESIAN_POINT('',(135.52738,-116.988152,1.585)); +#436427 = VECTOR('',#436428,1.); +#436428 = DIRECTION('',(0.,-1.,0.)); +#436429 = ORIENTED_EDGE('',*,*,#436430,.T.); +#436430 = EDGE_CURVE('',#436423,#436431,#436433,.T.); +#436431 = VERTEX_POINT('',#436432); +#436432 = CARTESIAN_POINT('',(135.5559,-117.551298,1.585)); +#436433 = LINE('',#436434,#436435); +#436434 = CARTESIAN_POINT('',(135.52738,-117.494256,1.585)); +#436435 = VECTOR('',#436436,1.); +#436436 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#436437 = ORIENTED_EDGE('',*,*,#436438,.T.); +#436438 = EDGE_CURVE('',#436431,#436439,#436441,.T.); +#436439 = VERTEX_POINT('',#436440); +#436440 = CARTESIAN_POINT('',(135.612942,-117.579819,1.585)); +#436441 = LINE('',#436442,#436443); +#436442 = CARTESIAN_POINT('',(135.5559,-117.551298,1.585)); +#436443 = VECTOR('',#436444,1.); +#436444 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#436445 = ORIENTED_EDGE('',*,*,#436446,.T.); +#436446 = EDGE_CURVE('',#436439,#436447,#436449,.T.); +#436447 = VERTEX_POINT('',#436448); +#436448 = CARTESIAN_POINT('',(135.720389,-117.579819,1.585)); +#436449 = LINE('',#436450,#436451); +#436450 = CARTESIAN_POINT('',(135.612942,-117.579819,1.585)); +#436451 = VECTOR('',#436452,1.); +#436452 = DIRECTION('',(1.,0.,0.)); +#436453 = ORIENTED_EDGE('',*,*,#436454,.T.); +#436454 = EDGE_CURVE('',#436447,#436455,#436457,.T.); +#436455 = VERTEX_POINT('',#436456); +#436456 = CARTESIAN_POINT('',(135.788904,-117.545561,1.585)); +#436457 = LINE('',#436458,#436459); +#436458 = CARTESIAN_POINT('',(135.720389,-117.579819,1.585)); +#436459 = VECTOR('',#436460,1.); +#436460 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#436461 = ORIENTED_EDGE('',*,*,#436462,.T.); +#436462 = EDGE_CURVE('',#436455,#436463,#436465,.T.); +#436463 = VERTEX_POINT('',#436464); +#436464 = CARTESIAN_POINT('',(135.805951,-117.528514,1.585)); +#436465 = LINE('',#436466,#436467); +#436466 = CARTESIAN_POINT('',(135.788904,-117.545561,1.585)); +#436467 = VECTOR('',#436468,1.); +#436468 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#436469 = ORIENTED_EDGE('',*,*,#436470,.T.); +#436470 = EDGE_CURVE('',#436463,#436471,#436473,.T.); +#436471 = VERTEX_POINT('',#436472); +#436472 = CARTESIAN_POINT('',(135.807392,-116.97352,1.585)); +#436473 = LINE('',#436474,#436475); +#436474 = CARTESIAN_POINT('',(135.805951,-117.528514,1.585)); +#436475 = VECTOR('',#436476,1.); +#436476 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#436477 = ORIENTED_EDGE('',*,*,#436478,.T.); +#436478 = EDGE_CURVE('',#436471,#436479,#436481,.T.); +#436479 = VERTEX_POINT('',#436480); +#436480 = CARTESIAN_POINT('',(135.955951,-116.988152,1.585)); +#436481 = CIRCLE('',#436482,7.500006711463E-02); +#436482 = AXIS2_PLACEMENT_3D('',#436483,#436484,#436485); +#436483 = CARTESIAN_POINT('',(135.88095093288,-116.9881519328,1.585)); +#436484 = DIRECTION('',(0.,0.,-1.)); +#436485 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#436486 = ORIENTED_EDGE('',*,*,#436487,.T.); +#436487 = EDGE_CURVE('',#436479,#436488,#436490,.T.); +#436488 = VERTEX_POINT('',#436489); +#436489 = CARTESIAN_POINT('',(135.95451,-117.669451,1.585)); +#436490 = LINE('',#436491,#436492); +#436491 = CARTESIAN_POINT('',(135.955951,-116.988152,1.585)); +#436492 = VECTOR('',#436493,1.); +#436493 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#436494 = ORIENTED_EDGE('',*,*,#436495,.T.); +#436495 = EDGE_CURVE('',#436488,#436496,#436498,.T.); +#436496 = VERTEX_POINT('',#436497); +#436497 = CARTESIAN_POINT('',(135.819881,-117.697777,1.585)); +#436498 = CIRCLE('',#436499,7.472335361468E-02); +#436499 = AXIS2_PLACEMENT_3D('',#436500,#436501,#436502); +#436500 = CARTESIAN_POINT('',(135.88118658714,-117.6550545871,1.585)); +#436501 = DIRECTION('',(-0.,0.,-1.)); +#436502 = DIRECTION('',(0.981265016972,-0.192662831049,-0.)); +#436503 = ORIENTED_EDGE('',*,*,#436504,.T.); +#436504 = EDGE_CURVE('',#436496,#436505,#436507,.T.); +#436505 = VERTEX_POINT('',#436506); +#436506 = CARTESIAN_POINT('',(135.752726,-117.728378,1.585)); +#436507 = LINE('',#436508,#436509); +#436508 = CARTESIAN_POINT('',(135.819881,-117.697777,1.585)); +#436509 = VECTOR('',#436510,1.); +#436510 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#436511 = ORIENTED_EDGE('',*,*,#436512,.T.); +#436512 = EDGE_CURVE('',#436505,#436513,#436515,.T.); +#436513 = VERTEX_POINT('',#436514); +#436514 = CARTESIAN_POINT('',(135.575427,-117.727156,1.585)); +#436515 = LINE('',#436516,#436517); +#436516 = CARTESIAN_POINT('',(135.752726,-117.728378,1.585)); +#436517 = VECTOR('',#436518,1.); +#436518 = DIRECTION('',(-0.999976248865,6.892148157212E-03,0.)); +#436519 = ORIENTED_EDGE('',*,*,#436520,.T.); +#436520 = EDGE_CURVE('',#436513,#436521,#436523,.T.); +#436521 = VERTEX_POINT('',#436522); +#436522 = CARTESIAN_POINT('',(135.454015,-117.66645,1.585)); +#436523 = LINE('',#436524,#436525); +#436524 = CARTESIAN_POINT('',(135.575427,-117.727156,1.585)); +#436525 = VECTOR('',#436526,1.); +#436526 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#436527 = ORIENTED_EDGE('',*,*,#436528,.T.); +#436528 = EDGE_CURVE('',#436521,#436529,#436531,.T.); +#436529 = VERTEX_POINT('',#436530); +#436530 = CARTESIAN_POINT('',(135.432917,-117.640741,1.585)); +#436531 = LINE('',#436532,#436533); +#436532 = CARTESIAN_POINT('',(135.454015,-117.66645,1.585)); +#436533 = VECTOR('',#436534,1.); +#436534 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#436535 = ORIENTED_EDGE('',*,*,#436536,.T.); +#436536 = EDGE_CURVE('',#436529,#436537,#436539,.T.); +#436537 = VERTEX_POINT('',#436538); +#436538 = CARTESIAN_POINT('',(135.39002,-116.946484,1.585)); +#436539 = CIRCLE('',#436540,0.780471555046); +#436540 = AXIS2_PLACEMENT_3D('',#436541,#436542,#436543); +#436541 = CARTESIAN_POINT('',(136.10883564715,-117.2505233291,1.585)); +#436542 = DIRECTION('',(0.,0.,-1.)); +#436543 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#436544 = ORIENTED_EDGE('',*,*,#436545,.T.); +#436545 = EDGE_CURVE('',#436537,#436412,#436546,.T.); +#436546 = LINE('',#436547,#436548); +#436547 = CARTESIAN_POINT('',(135.39002,-116.946484,1.585)); +#436548 = VECTOR('',#436549,1.); +#436549 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#436550 = PLANE('',#436551); +#436551 = AXIS2_PLACEMENT_3D('',#436552,#436553,#436554); +#436552 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436553 = DIRECTION('',(0.,0.,1.)); +#436554 = DIRECTION('',(1.,0.,-0.)); +#436555 = SHELL_BASED_SURFACE_MODEL('',(#436556)); +#436556 = OPEN_SHELL('',(#436557)); +#436557 = ADVANCED_FACE('',(#436558,#436635),#436712,.T.); +#436558 = FACE_BOUND('',#436559,.F.); +#436559 = EDGE_LOOP('',(#436560,#436571,#436579,#436587,#436596,#436604, + #436613,#436621,#436629)); +#436560 = ORIENTED_EDGE('',*,*,#436561,.T.); +#436561 = EDGE_CURVE('',#436562,#436564,#436566,.T.); +#436562 = VERTEX_POINT('',#436563); +#436563 = CARTESIAN_POINT('',(137.507778,-116.972653,1.585)); +#436564 = VERTEX_POINT('',#436565); +#436565 = CARTESIAN_POINT('',(137.991688,-117.043549,1.585)); +#436566 = CIRCLE('',#436567,0.34461174713); +#436567 = AXIS2_PLACEMENT_3D('',#436568,#436569,#436570); +#436568 = CARTESIAN_POINT('',(137.71453494377,-117.2483499757,1.585)); +#436569 = DIRECTION('',(0.,0.,-1.)); +#436570 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#436571 = ORIENTED_EDGE('',*,*,#436572,.T.); +#436572 = EDGE_CURVE('',#436564,#436573,#436575,.T.); +#436573 = VERTEX_POINT('',#436574); +#436574 = CARTESIAN_POINT('',(138.049749,-117.163996,1.585)); +#436575 = LINE('',#436576,#436577); +#436576 = CARTESIAN_POINT('',(137.991688,-117.043549,1.585)); +#436577 = VECTOR('',#436578,1.); +#436578 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#436579 = ORIENTED_EDGE('',*,*,#436580,.T.); +#436580 = EDGE_CURVE('',#436573,#436581,#436583,.T.); +#436581 = VERTEX_POINT('',#436582); +#436582 = CARTESIAN_POINT('',(138.048527,-117.484152,1.585)); +#436583 = LINE('',#436584,#436585); +#436584 = CARTESIAN_POINT('',(138.049749,-117.163996,1.585)); +#436585 = VECTOR('',#436586,1.); +#436586 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#436587 = ORIENTED_EDGE('',*,*,#436588,.T.); +#436588 = EDGE_CURVE('',#436581,#436589,#436591,.T.); +#436589 = VERTEX_POINT('',#436590); +#436590 = CARTESIAN_POINT('',(137.800346,-117.728378,1.585)); +#436591 = CIRCLE('',#436592,0.348635327447); +#436592 = AXIS2_PLACEMENT_3D('',#436593,#436594,#436595); +#436593 = CARTESIAN_POINT('',(137.71257448129,-117.3909720841,1.585)); +#436594 = DIRECTION('',(0.,0.,-1.)); +#436595 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#436596 = ORIENTED_EDGE('',*,*,#436597,.T.); +#436597 = EDGE_CURVE('',#436589,#436598,#436600,.T.); +#436598 = VERTEX_POINT('',#436599); +#436599 = CARTESIAN_POINT('',(137.623047,-117.727156,1.585)); +#436600 = LINE('',#436601,#436602); +#436601 = CARTESIAN_POINT('',(137.800346,-117.728378,1.585)); +#436602 = VECTOR('',#436603,1.); +#436603 = DIRECTION('',(-0.999976248865,6.892148157213E-03,0.)); +#436604 = ORIENTED_EDGE('',*,*,#436605,.T.); +#436605 = EDGE_CURVE('',#436598,#436606,#436608,.T.); +#436606 = VERTEX_POINT('',#436607); +#436607 = CARTESIAN_POINT('',(137.378822,-117.478974,1.585)); +#436608 = CIRCLE('',#436609,0.348628446661); +#436609 = AXIS2_PLACEMENT_3D('',#436610,#436611,#436612); +#436610 = CARTESIAN_POINT('',(137.71622261322,-117.3912094284,1.585)); +#436611 = DIRECTION('',(0.,0.,-1.)); +#436612 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#436613 = ORIENTED_EDGE('',*,*,#436614,.T.); +#436614 = EDGE_CURVE('',#436606,#436615,#436617,.T.); +#436615 = VERTEX_POINT('',#436616); +#436616 = CARTESIAN_POINT('',(137.380044,-117.158819,1.585)); +#436617 = LINE('',#436618,#436619); +#436618 = CARTESIAN_POINT('',(137.378822,-117.478974,1.585)); +#436619 = VECTOR('',#436620,1.); +#436620 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#436621 = ORIENTED_EDGE('',*,*,#436622,.T.); +#436622 = EDGE_CURVE('',#436615,#436623,#436625,.T.); +#436623 = VERTEX_POINT('',#436624); +#436624 = CARTESIAN_POINT('',(137.442248,-117.036106,1.585)); +#436625 = LINE('',#436626,#436627); +#436626 = CARTESIAN_POINT('',(137.380044,-117.158819,1.585)); +#436627 = VECTOR('',#436628,1.); +#436628 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#436629 = ORIENTED_EDGE('',*,*,#436630,.T.); +#436630 = EDGE_CURVE('',#436623,#436562,#436631,.T.); +#436631 = LINE('',#436632,#436633); +#436632 = CARTESIAN_POINT('',(137.442248,-117.036106,1.585)); +#436633 = VECTOR('',#436634,1.); +#436634 = DIRECTION('',(0.718400113327,0.695630129574,0.)); +#436635 = FACE_BOUND('',#436636,.F.); +#436636 = EDGE_LOOP('',(#436637,#436648,#436656,#436664,#436673,#436681, + #436690,#436698,#436706)); +#436637 = ORIENTED_EDGE('',*,*,#436638,.T.); +#436638 = EDGE_CURVE('',#436639,#436641,#436643,.T.); +#436639 = VERTEX_POINT('',#436640); +#436640 = CARTESIAN_POINT('',(137.836525,-117.09741,1.585)); +#436641 = VERTEX_POINT('',#436642); +#436642 = CARTESIAN_POINT('',(137.561639,-117.127817,1.585)); +#436643 = CIRCLE('',#436644,0.198386215365); +#436644 = AXIS2_PLACEMENT_3D('',#436645,#436646,#436647); +#436645 = CARTESIAN_POINT('',(137.71472195783,-117.2540021753,1.585)); +#436646 = DIRECTION('',(0.,0.,1.)); +#436647 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#436648 = ORIENTED_EDGE('',*,*,#436649,.T.); +#436649 = EDGE_CURVE('',#436641,#436650,#436652,.T.); +#436650 = VERTEX_POINT('',#436651); +#436651 = CARTESIAN_POINT('',(137.527381,-117.196333,1.585)); +#436652 = LINE('',#436653,#436654); +#436653 = CARTESIAN_POINT('',(137.561639,-117.127817,1.585)); +#436654 = VECTOR('',#436655,1.); +#436655 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#436656 = ORIENTED_EDGE('',*,*,#436657,.T.); +#436657 = EDGE_CURVE('',#436650,#436658,#436660,.T.); +#436658 = VERTEX_POINT('',#436659); +#436659 = CARTESIAN_POINT('',(137.527381,-117.446637,1.585)); +#436660 = LINE('',#436661,#436662); +#436661 = CARTESIAN_POINT('',(137.527381,-117.196333,1.585)); +#436662 = VECTOR('',#436663,1.); +#436663 = DIRECTION('',(0.,-1.,0.)); +#436664 = ORIENTED_EDGE('',*,*,#436665,.T.); +#436665 = EDGE_CURVE('',#436658,#436666,#436668,.T.); +#436666 = VERTEX_POINT('',#436667); +#436667 = CARTESIAN_POINT('',(137.660562,-117.579819,1.585)); +#436668 = CIRCLE('',#436669,0.186867373533); +#436669 = AXIS2_PLACEMENT_3D('',#436670,#436671,#436672); +#436670 = CARTESIAN_POINT('',(137.70810071388,-117.399099643,1.585)); +#436671 = DIRECTION('',(0.,0.,1.)); +#436672 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#436673 = ORIENTED_EDGE('',*,*,#436674,.T.); +#436674 = EDGE_CURVE('',#436666,#436675,#436677,.T.); +#436675 = VERTEX_POINT('',#436676); +#436676 = CARTESIAN_POINT('',(137.768009,-117.579819,1.585)); +#436677 = LINE('',#436678,#436679); +#436678 = CARTESIAN_POINT('',(137.660562,-117.579819,1.585)); +#436679 = VECTOR('',#436680,1.); +#436680 = DIRECTION('',(1.,0.,0.)); +#436681 = ORIENTED_EDGE('',*,*,#436682,.T.); +#436682 = EDGE_CURVE('',#436675,#436683,#436685,.T.); +#436683 = VERTEX_POINT('',#436684); +#436684 = CARTESIAN_POINT('',(137.90119,-117.446637,1.585)); +#436685 = CIRCLE('',#436686,0.186867760544); +#436686 = AXIS2_PLACEMENT_3D('',#436687,#436688,#436689); +#436687 = CARTESIAN_POINT('',(137.72046996928,-117.3990993262,1.585)); +#436688 = DIRECTION('',(0.,0.,1.)); +#436689 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#436690 = ORIENTED_EDGE('',*,*,#436691,.T.); +#436691 = EDGE_CURVE('',#436683,#436692,#436694,.T.); +#436692 = VERTEX_POINT('',#436693); +#436693 = CARTESIAN_POINT('',(137.90119,-117.196333,1.585)); +#436694 = LINE('',#436695,#436696); +#436695 = CARTESIAN_POINT('',(137.90119,-117.446637,1.585)); +#436696 = VECTOR('',#436697,1.); +#436697 = DIRECTION('',(0.,1.,0.)); +#436698 = ORIENTED_EDGE('',*,*,#436699,.T.); +#436699 = EDGE_CURVE('',#436692,#436700,#436702,.T.); +#436700 = VERTEX_POINT('',#436701); +#436701 = CARTESIAN_POINT('',(137.866932,-117.127817,1.585)); +#436702 = LINE('',#436703,#436704); +#436703 = CARTESIAN_POINT('',(137.90119,-117.196333,1.585)); +#436704 = VECTOR('',#436705,1.); +#436705 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#436706 = ORIENTED_EDGE('',*,*,#436707,.T.); +#436707 = EDGE_CURVE('',#436700,#436639,#436708,.T.); +#436708 = LINE('',#436709,#436710); +#436709 = CARTESIAN_POINT('',(137.866932,-117.127817,1.585)); +#436710 = VECTOR('',#436711,1.); +#436711 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#436712 = PLANE('',#436713); +#436713 = AXIS2_PLACEMENT_3D('',#436714,#436715,#436716); +#436714 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436715 = DIRECTION('',(0.,0.,1.)); +#436716 = DIRECTION('',(1.,0.,-0.)); +#436717 = SHELL_BASED_SURFACE_MODEL('',(#436718)); +#436718 = OPEN_SHELL('',(#436719)); +#436719 = ADVANCED_FACE('',(#436720),#436878,.T.); +#436720 = FACE_BOUND('',#436721,.F.); +#436721 = EDGE_LOOP('',(#436722,#436733,#436741,#436749,#436757,#436765, + #436774,#436782,#436791,#436799,#436807,#436815,#436823,#436831, + #436839,#436847,#436856,#436864,#436872)); +#436722 = ORIENTED_EDGE('',*,*,#436723,.T.); +#436723 = EDGE_CURVE('',#436724,#436726,#436728,.T.); +#436724 = VERTEX_POINT('',#436725); +#436725 = CARTESIAN_POINT('',(138.363094,-116.925792,1.585)); +#436726 = VERTEX_POINT('',#436727); +#436727 = CARTESIAN_POINT('',(138.465831,-116.945193,1.585)); +#436728 = CIRCLE('',#436729,7.440760172328E-02); +#436729 = AXIS2_PLACEMENT_3D('',#436730,#436731,#436732); +#436730 = CARTESIAN_POINT('',(138.40463706572,-116.987522583,1.585)); +#436731 = DIRECTION('',(0.,0.,-1.)); +#436732 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#436733 = ORIENTED_EDGE('',*,*,#436734,.T.); +#436734 = EDGE_CURVE('',#436726,#436735,#436737,.T.); +#436735 = VERTEX_POINT('',#436736); +#436736 = CARTESIAN_POINT('',(138.532987,-116.914593,1.585)); +#436737 = LINE('',#436738,#436739); +#436738 = CARTESIAN_POINT('',(138.465831,-116.945193,1.585)); +#436739 = VECTOR('',#436740,1.); +#436740 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#436741 = ORIENTED_EDGE('',*,*,#436742,.T.); +#436742 = EDGE_CURVE('',#436735,#436743,#436745,.T.); +#436743 = VERTEX_POINT('',#436744); +#436744 = CARTESIAN_POINT('',(138.705108,-116.914593,1.585)); +#436745 = LINE('',#436746,#436747); +#436746 = CARTESIAN_POINT('',(138.532987,-116.914593,1.585)); +#436747 = VECTOR('',#436748,1.); +#436748 = DIRECTION('',(1.,0.,0.)); +#436749 = ORIENTED_EDGE('',*,*,#436750,.T.); +#436750 = EDGE_CURVE('',#436743,#436751,#436753,.T.); +#436751 = VERTEX_POINT('',#436752); +#436752 = CARTESIAN_POINT('',(138.831698,-116.976521,1.585)); +#436753 = LINE('',#436754,#436755); +#436754 = CARTESIAN_POINT('',(138.705108,-116.914593,1.585)); +#436755 = VECTOR('',#436756,1.); +#436756 = DIRECTION('',(0.898273580441,-0.439436656052,0.)); +#436757 = ORIENTED_EDGE('',*,*,#436758,.T.); +#436758 = EDGE_CURVE('',#436751,#436759,#436761,.T.); +#436759 = VERTEX_POINT('',#436760); +#436760 = CARTESIAN_POINT('',(138.852796,-117.00223,1.585)); +#436761 = LINE('',#436762,#436763); +#436762 = CARTESIAN_POINT('',(138.831698,-116.976521,1.585)); +#436763 = VECTOR('',#436764,1.); +#436764 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#436765 = ORIENTED_EDGE('',*,*,#436766,.T.); +#436766 = EDGE_CURVE('',#436759,#436767,#436769,.T.); +#436767 = VERTEX_POINT('',#436768); +#436768 = CARTESIAN_POINT('',(138.895693,-117.696487,1.585)); +#436769 = CIRCLE('',#436770,0.780466291445); +#436770 = AXIS2_PLACEMENT_3D('',#436771,#436772,#436773); +#436771 = CARTESIAN_POINT('',(138.1768832213,-117.3924473082,1.585)); +#436772 = DIRECTION('',(0.,0.,-1.)); +#436773 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#436774 = ORIENTED_EDGE('',*,*,#436775,.T.); +#436775 = EDGE_CURVE('',#436767,#436776,#436778,.T.); +#436776 = VERTEX_POINT('',#436777); +#436777 = CARTESIAN_POINT('',(138.875001,-117.717179,1.585)); +#436778 = LINE('',#436779,#436780); +#436779 = CARTESIAN_POINT('',(138.895693,-117.696487,1.585)); +#436780 = VECTOR('',#436781,1.); +#436781 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#436782 = ORIENTED_EDGE('',*,*,#436783,.T.); +#436783 = EDGE_CURVE('',#436776,#436784,#436786,.T.); +#436784 = VERTEX_POINT('',#436785); +#436785 = CARTESIAN_POINT('',(138.758333,-117.654819,1.585)); +#436786 = CIRCLE('',#436787,7.499979580331E-02); +#436787 = AXIS2_PLACEMENT_3D('',#436788,#436789,#436790); +#436788 = CARTESIAN_POINT('',(138.8333327958,-117.6548193164,1.585)); +#436789 = DIRECTION('',(-0.,0.,-1.)); +#436790 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#436791 = ORIENTED_EDGE('',*,*,#436792,.T.); +#436792 = EDGE_CURVE('',#436784,#436793,#436795,.T.); +#436793 = VERTEX_POINT('',#436794); +#436794 = CARTESIAN_POINT('',(138.758333,-117.148714,1.585)); +#436795 = LINE('',#436796,#436797); +#436796 = CARTESIAN_POINT('',(138.758333,-117.654819,1.585)); +#436797 = VECTOR('',#436798,1.); +#436798 = DIRECTION('',(0.,1.,0.)); +#436799 = ORIENTED_EDGE('',*,*,#436800,.T.); +#436800 = EDGE_CURVE('',#436793,#436801,#436803,.T.); +#436801 = VERTEX_POINT('',#436802); +#436802 = CARTESIAN_POINT('',(138.729812,-117.091672,1.585)); +#436803 = LINE('',#436804,#436805); +#436804 = CARTESIAN_POINT('',(138.758333,-117.148714,1.585)); +#436805 = VECTOR('',#436806,1.); +#436806 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#436807 = ORIENTED_EDGE('',*,*,#436808,.T.); +#436808 = EDGE_CURVE('',#436801,#436809,#436811,.T.); +#436809 = VERTEX_POINT('',#436810); +#436810 = CARTESIAN_POINT('',(138.672771,-117.063152,1.585)); +#436811 = LINE('',#436812,#436813); +#436812 = CARTESIAN_POINT('',(138.729812,-117.091672,1.585)); +#436813 = VECTOR('',#436814,1.); +#436814 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#436815 = ORIENTED_EDGE('',*,*,#436816,.T.); +#436816 = EDGE_CURVE('',#436809,#436817,#436819,.T.); +#436817 = VERTEX_POINT('',#436818); +#436818 = CARTESIAN_POINT('',(138.565324,-117.063152,1.585)); +#436819 = LINE('',#436820,#436821); +#436820 = CARTESIAN_POINT('',(138.672771,-117.063152,1.585)); +#436821 = VECTOR('',#436822,1.); +#436822 = DIRECTION('',(-1.,0.,0.)); +#436823 = ORIENTED_EDGE('',*,*,#436824,.T.); +#436824 = EDGE_CURVE('',#436817,#436825,#436827,.T.); +#436825 = VERTEX_POINT('',#436826); +#436826 = CARTESIAN_POINT('',(138.496808,-117.09741,1.585)); +#436827 = LINE('',#436828,#436829); +#436828 = CARTESIAN_POINT('',(138.565324,-117.063152,1.585)); +#436829 = VECTOR('',#436830,1.); +#436830 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#436831 = ORIENTED_EDGE('',*,*,#436832,.T.); +#436832 = EDGE_CURVE('',#436825,#436833,#436835,.T.); +#436833 = VERTEX_POINT('',#436834); +#436834 = CARTESIAN_POINT('',(138.479762,-117.114456,1.585)); +#436835 = LINE('',#436836,#436837); +#436836 = CARTESIAN_POINT('',(138.496808,-117.09741,1.585)); +#436837 = VECTOR('',#436838,1.); +#436838 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#436839 = ORIENTED_EDGE('',*,*,#436840,.T.); +#436840 = EDGE_CURVE('',#436833,#436841,#436843,.T.); +#436841 = VERTEX_POINT('',#436842); +#436842 = CARTESIAN_POINT('',(138.478321,-117.669451,1.585)); +#436843 = LINE('',#436844,#436845); +#436844 = CARTESIAN_POINT('',(138.479762,-117.114456,1.585)); +#436845 = VECTOR('',#436846,1.); +#436846 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#436847 = ORIENTED_EDGE('',*,*,#436848,.T.); +#436848 = EDGE_CURVE('',#436841,#436849,#436851,.T.); +#436849 = VERTEX_POINT('',#436850); +#436850 = CARTESIAN_POINT('',(138.329762,-117.654819,1.585)); +#436851 = CIRCLE('',#436852,7.500006711465E-02); +#436852 = AXIS2_PLACEMENT_3D('',#436853,#436854,#436855); +#436853 = CARTESIAN_POINT('',(138.40476206711,-117.6548190671,1.585)); +#436854 = DIRECTION('',(-0.,0.,-1.)); +#436855 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#436856 = ORIENTED_EDGE('',*,*,#436857,.T.); +#436857 = EDGE_CURVE('',#436849,#436858,#436860,.T.); +#436858 = VERTEX_POINT('',#436859); +#436859 = CARTESIAN_POINT('',(138.331203,-116.97352,1.585)); +#436860 = LINE('',#436861,#436862); +#436861 = CARTESIAN_POINT('',(138.329762,-117.654819,1.585)); +#436862 = VECTOR('',#436863,1.); +#436863 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#436864 = ORIENTED_EDGE('',*,*,#436865,.T.); +#436865 = EDGE_CURVE('',#436858,#436866,#436868,.T.); +#436866 = VERTEX_POINT('',#436867); +#436867 = CARTESIAN_POINT('',(138.342402,-116.946484,1.585)); +#436868 = LINE('',#436869,#436870); +#436869 = CARTESIAN_POINT('',(138.331203,-116.97352,1.585)); +#436870 = VECTOR('',#436871,1.); +#436871 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#436872 = ORIENTED_EDGE('',*,*,#436873,.T.); +#436873 = EDGE_CURVE('',#436866,#436724,#436874,.T.); +#436874 = LINE('',#436875,#436876); +#436875 = CARTESIAN_POINT('',(138.342402,-116.946484,1.585)); +#436876 = VECTOR('',#436877,1.); +#436877 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#436878 = PLANE('',#436879); +#436879 = AXIS2_PLACEMENT_3D('',#436880,#436881,#436882); +#436880 = CARTESIAN_POINT('',(0.,0.,1.585)); +#436881 = DIRECTION('',(0.,0.,1.)); +#436882 = DIRECTION('',(1.,0.,-0.)); +#436883 = SHELL_BASED_SURFACE_MODEL('',(#436884)); +#436884 = OPEN_SHELL('',(#436885)); +#436885 = ADVANCED_FACE('',(#436886),#437081,.T.); +#436886 = FACE_BOUND('',#436887,.F.); +#436887 = EDGE_LOOP('',(#436888,#436899,#436907,#436916,#436924,#436932, + #436940,#436948,#436957,#436965,#436974,#436982,#436990,#436998, + #437007,#437015,#437024,#437032,#437041,#437049,#437058,#437066, + #437075)); +#436888 = ORIENTED_EDGE('',*,*,#436889,.T.); +#436889 = EDGE_CURVE('',#436890,#436892,#436894,.T.); +#436890 = VERTEX_POINT('',#436891); +#436891 = CARTESIAN_POINT('',(139.999691,-116.63294,1.585)); +#436892 = VERTEX_POINT('',#436893); +#436893 = CARTESIAN_POINT('',(140.071429,-116.579819,1.585)); +#436894 = CIRCLE('',#436895,7.500336100759E-02); +#436895 = AXIS2_PLACEMENT_3D('',#436896,#436897,#436898); +#436896 = CARTESIAN_POINT('',(140.0714312707,-116.6548223609,1.585)); +#436897 = DIRECTION('',(0.,0.,-1.)); +#436898 = DIRECTION('',(-0.956494078934,0.291751738579,0.)); +#436899 = ORIENTED_EDGE('',*,*,#436900,.T.); +#436900 = EDGE_CURVE('',#436892,#436901,#436903,.T.); +#436901 = VERTEX_POINT('',#436902); +#436902 = CARTESIAN_POINT('',(140.562251,-116.58126,1.585)); +#436903 = LINE('',#436904,#436905); +#436904 = CARTESIAN_POINT('',(140.071429,-116.579819,1.585)); +#436905 = VECTOR('',#436906,1.); +#436906 = DIRECTION('',(0.999995690299,-2.935878566407E-03,0.)); +#436907 = ORIENTED_EDGE('',*,*,#436908,.T.); +#436908 = EDGE_CURVE('',#436901,#436909,#436911,.T.); +#436909 = VERTEX_POINT('',#436910); +#436910 = CARTESIAN_POINT('',(140.547619,-116.729819,1.585)); +#436911 = CIRCLE('',#436912,7.500006711464E-02); +#436912 = AXIS2_PLACEMENT_3D('',#436913,#436914,#436915); +#436913 = CARTESIAN_POINT('',(140.54761906711,-116.6548189328,1.585)); +#436914 = DIRECTION('',(0.,0.,-1.)); +#436915 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#436916 = ORIENTED_EDGE('',*,*,#436917,.T.); +#436917 = EDGE_CURVE('',#436909,#436918,#436920,.T.); +#436918 = VERTEX_POINT('',#436919); +#436919 = CARTESIAN_POINT('',(140.139303,-116.729819,1.585)); +#436920 = LINE('',#436921,#436922); +#436921 = CARTESIAN_POINT('',(140.547619,-116.729819,1.585)); +#436922 = VECTOR('',#436923,1.); +#436923 = DIRECTION('',(-1.,0.,0.)); +#436924 = ORIENTED_EDGE('',*,*,#436925,.T.); +#436925 = EDGE_CURVE('',#436918,#436926,#436928,.T.); +#436926 = VERTEX_POINT('',#436927); +#436927 = CARTESIAN_POINT('',(140.114484,-116.978009,1.585)); +#436928 = LINE('',#436929,#436930); +#436929 = CARTESIAN_POINT('',(140.139303,-116.729819,1.585)); +#436930 = VECTOR('',#436931,1.); +#436931 = DIRECTION('',(-9.950371902103E-02,-0.99503719021,0.)); +#436932 = ORIENTED_EDGE('',*,*,#436933,.T.); +#436933 = EDGE_CURVE('',#436926,#436934,#436936,.T.); +#436934 = VERTEX_POINT('',#436935); +#436935 = CARTESIAN_POINT('',(140.152035,-116.962212,1.585)); +#436936 = LINE('',#436937,#436938); +#436937 = CARTESIAN_POINT('',(140.114484,-116.978009,1.585)); +#436938 = VECTOR('',#436939,1.); +#436939 = DIRECTION('',(0.92175777459,0.387766173077,0.)); +#436940 = ORIENTED_EDGE('',*,*,#436941,.T.); +#436941 = EDGE_CURVE('',#436934,#436942,#436944,.T.); +#436942 = VERTEX_POINT('',#436943); +#436943 = CARTESIAN_POINT('',(140.424571,-116.963434,1.585)); +#436944 = LINE('',#436945,#436946); +#436945 = CARTESIAN_POINT('',(140.152035,-116.962212,1.585)); +#436946 = VECTOR('',#436947,1.); +#436947 = DIRECTION('',(0.99998994787,-4.483766241192E-03,0.)); +#436948 = ORIENTED_EDGE('',*,*,#436949,.T.); +#436949 = EDGE_CURVE('',#436942,#436950,#436952,.T.); +#436950 = VERTEX_POINT('',#436951); +#436951 = CARTESIAN_POINT('',(140.668797,-117.211615,1.585)); +#436952 = CIRCLE('',#436953,0.348625649748); +#436953 = AXIS2_PLACEMENT_3D('',#436954,#436955,#436956); +#436954 = CARTESIAN_POINT('',(140.33139904586,-117.2993786838,1.585)); +#436955 = DIRECTION('',(0.,0.,-1.)); +#436956 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#436957 = ORIENTED_EDGE('',*,*,#436958,.T.); +#436958 = EDGE_CURVE('',#436950,#436959,#436961,.T.); +#436959 = VERTEX_POINT('',#436960); +#436960 = CARTESIAN_POINT('',(140.667575,-117.484152,1.585)); +#436961 = LINE('',#436962,#436963); +#436962 = CARTESIAN_POINT('',(140.668797,-117.211615,1.585)); +#436963 = VECTOR('',#436964,1.); +#436964 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#436965 = ORIENTED_EDGE('',*,*,#436966,.T.); +#436966 = EDGE_CURVE('',#436959,#436967,#436969,.T.); +#436967 = VERTEX_POINT('',#436968); +#436968 = CARTESIAN_POINT('',(140.419394,-117.728378,1.585)); +#436969 = CIRCLE('',#436970,0.348635327447); +#436970 = AXIS2_PLACEMENT_3D('',#436971,#436972,#436973); +#436971 = CARTESIAN_POINT('',(140.33162248129,-117.3909720841,1.585)); +#436972 = DIRECTION('',(0.,0.,-1.)); +#436973 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#436974 = ORIENTED_EDGE('',*,*,#436975,.T.); +#436975 = EDGE_CURVE('',#436967,#436976,#436978,.T.); +#436976 = VERTEX_POINT('',#436977); +#436977 = CARTESIAN_POINT('',(140.146857,-117.727156,1.585)); +#436978 = LINE('',#436979,#436980); +#436979 = CARTESIAN_POINT('',(140.419394,-117.728378,1.585)); +#436980 = VECTOR('',#436981,1.); +#436981 = DIRECTION('',(-0.999989947943,4.483749789568E-03,0.)); +#436982 = ORIENTED_EDGE('',*,*,#436983,.T.); +#436983 = EDGE_CURVE('',#436976,#436984,#436986,.T.); +#436984 = VERTEX_POINT('',#436985); +#436985 = CARTESIAN_POINT('',(140.024144,-117.66495,1.585)); +#436986 = LINE('',#436987,#436988); +#436987 = CARTESIAN_POINT('',(140.146857,-117.727156,1.585)); +#436988 = VECTOR('',#436989,1.); +#436989 = DIRECTION('',(-0.891943702445,0.452146471476,0.)); +#436990 = ORIENTED_EDGE('',*,*,#436991,.T.); +#436991 = EDGE_CURVE('',#436984,#436992,#436994,.T.); +#436992 = VERTEX_POINT('',#436993); +#436993 = CARTESIAN_POINT('',(139.961449,-117.601247,1.585)); +#436994 = LINE('',#436995,#436996); +#436995 = CARTESIAN_POINT('',(140.024144,-117.66495,1.585)); +#436996 = VECTOR('',#436997,1.); +#436997 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#436998 = ORIENTED_EDGE('',*,*,#436999,.T.); +#436999 = EDGE_CURVE('',#436992,#437000,#437002,.T.); +#437000 = VERTEX_POINT('',#437001); +#437001 = CARTESIAN_POINT('',(140.076844,-117.506548,1.585)); +#437002 = CIRCLE('',#437003,7.50001266804E-02); +#437003 = AXIS2_PLACEMENT_3D('',#437004,#437005,#437006); +#437004 = CARTESIAN_POINT('',(140.02381005199,-117.5595802483,1.585)); +#437005 = DIRECTION('',(0.,0.,-1.)); +#437006 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#437007 = ORIENTED_EDGE('',*,*,#437008,.T.); +#437008 = EDGE_CURVE('',#437000,#437009,#437011,.T.); +#437009 = VERTEX_POINT('',#437010); +#437010 = CARTESIAN_POINT('',(140.115856,-117.545561,1.585)); +#437011 = LINE('',#437012,#437013); +#437012 = CARTESIAN_POINT('',(140.076844,-117.506548,1.585)); +#437013 = VECTOR('',#437014,1.); +#437014 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#437015 = ORIENTED_EDGE('',*,*,#437016,.T.); +#437016 = EDGE_CURVE('',#437009,#437017,#437019,.T.); +#437017 = VERTEX_POINT('',#437018); +#437018 = CARTESIAN_POINT('',(140.455572,-117.545561,1.585)); +#437019 = CIRCLE('',#437020,0.305620374329); +#437020 = AXIS2_PLACEMENT_3D('',#437021,#437022,#437023); +#437021 = CARTESIAN_POINT('',(140.285714,-117.29149,1.585)); +#437022 = DIRECTION('',(0.,0.,1.)); +#437023 = DIRECTION('',(-0.555781008949,-0.831328737679,0.)); +#437024 = ORIENTED_EDGE('',*,*,#437025,.T.); +#437025 = EDGE_CURVE('',#437017,#437026,#437028,.T.); +#437026 = VERTEX_POINT('',#437027); +#437027 = CARTESIAN_POINT('',(140.485979,-117.515153,1.585)); +#437028 = LINE('',#437029,#437030); +#437029 = CARTESIAN_POINT('',(140.455572,-117.545561,1.585)); +#437030 = VECTOR('',#437031,1.); +#437031 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#437032 = ORIENTED_EDGE('',*,*,#437033,.T.); +#437033 = EDGE_CURVE('',#437026,#437034,#437036,.T.); +#437034 = VERTEX_POINT('',#437035); +#437035 = CARTESIAN_POINT('',(140.48598,-117.175436,1.585)); +#437036 = CIRCLE('',#437037,0.305616146029); +#437037 = AXIS2_PLACEMENT_3D('',#437038,#437039,#437040); +#437038 = CARTESIAN_POINT('',(140.23191392049,-117.3452937521,1.585)); +#437039 = DIRECTION('',(0.,-0.,1.)); +#437040 = DIRECTION('',(0.831320867071,-0.555792781505,-0.)); +#437041 = ORIENTED_EDGE('',*,*,#437042,.T.); +#437042 = EDGE_CURVE('',#437034,#437043,#437045,.T.); +#437043 = VERTEX_POINT('',#437044); +#437044 = CARTESIAN_POINT('',(140.455573,-117.145029,1.585)); +#437045 = LINE('',#437046,#437047); +#437046 = CARTESIAN_POINT('',(140.48598,-117.175436,1.585)); +#437047 = VECTOR('',#437048,1.); +#437048 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#437049 = ORIENTED_EDGE('',*,*,#437050,.T.); +#437050 = EDGE_CURVE('',#437043,#437051,#437053,.T.); +#437051 = VERTEX_POINT('',#437052); +#437052 = CARTESIAN_POINT('',(140.115856,-117.145029,1.585)); +#437053 = CIRCLE('',#437054,0.305621483548); +#437054 = AXIS2_PLACEMENT_3D('',#437055,#437056,#437057); +#437055 = CARTESIAN_POINT('',(140.2857145,-117.399101,1.585)); +#437056 = DIRECTION('',(0.,0.,1.)); +#437057 = DIRECTION('',(0.555780627814,0.831328992485,-0.)); +#437058 = ORIENTED_EDGE('',*,*,#437059,.T.); +#437059 = EDGE_CURVE('',#437051,#437060,#437062,.T.); +#437060 = VERTEX_POINT('',#437061); +#437061 = CARTESIAN_POINT('',(140.059066,-117.197206,1.585)); +#437062 = LINE('',#437063,#437064); +#437063 = CARTESIAN_POINT('',(140.115856,-117.145029,1.585)); +#437064 = VECTOR('',#437065,1.); +#437065 = DIRECTION('',(-0.736381819545,-0.676566194724,0.)); +#437066 = ORIENTED_EDGE('',*,*,#437067,.T.); +#437067 = EDGE_CURVE('',#437060,#437068,#437070,.T.); +#437068 = VERTEX_POINT('',#437069); +#437069 = CARTESIAN_POINT('',(139.94916,-117.138249,1.585)); +#437070 = CIRCLE('',#437071,7.500024172471E-02); +#437071 = AXIS2_PLACEMENT_3D('',#437072,#437073,#437074); +#437072 = CARTESIAN_POINT('',(140.02380997002,-117.1310089561,1.585)); +#437073 = DIRECTION('',(-0.,0.,-1.)); +#437074 = DIRECTION('',(0.470078884633,-0.882624406088,-0.)); +#437075 = ORIENTED_EDGE('',*,*,#437076,.T.); +#437076 = EDGE_CURVE('',#437068,#436890,#437077,.T.); +#437077 = LINE('',#437078,#437079); +#437078 = CARTESIAN_POINT('',(139.94916,-117.138249,1.585)); +#437079 = VECTOR('',#437080,1.); +#437080 = DIRECTION('',(9.950391398792E-02,0.995037170713,0.)); +#437081 = PLANE('',#437082); +#437082 = AXIS2_PLACEMENT_3D('',#437083,#437084,#437085); +#437083 = CARTESIAN_POINT('',(0.,0.,1.585)); +#437084 = DIRECTION('',(0.,0.,1.)); +#437085 = DIRECTION('',(1.,0.,-0.)); +#437086 = SHELL_BASED_SURFACE_MODEL('',(#437087)); +#437087 = OPEN_SHELL('',(#437088)); +#437088 = ADVANCED_FACE('',(#437089),#437263,.T.); +#437089 = FACE_BOUND('',#437090,.F.); +#437090 = EDGE_LOOP('',(#437091,#437102,#437110,#437118,#437127,#437135, + #437143,#437151,#437159,#437167,#437176,#437184,#437192,#437200, + #437208,#437216,#437224,#437233,#437241,#437249,#437257)); +#437091 = ORIENTED_EDGE('',*,*,#437092,.T.); +#437092 = EDGE_CURVE('',#437093,#437095,#437097,.T.); +#437093 = VERTEX_POINT('',#437094); +#437094 = CARTESIAN_POINT('',(146.565474,-116.578459,1.585)); +#437095 = VERTEX_POINT('',#437096); +#437096 = CARTESIAN_POINT('',(146.682142,-116.640819,1.585)); +#437097 = CIRCLE('',#437098,7.500000000002E-02); +#437098 = AXIS2_PLACEMENT_3D('',#437099,#437100,#437101); +#437099 = CARTESIAN_POINT('',(146.607142,-116.6408190655,1.585)); +#437100 = DIRECTION('',(0.,0.,-1.)); +#437101 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#437102 = ORIENTED_EDGE('',*,*,#437103,.T.); +#437103 = EDGE_CURVE('',#437095,#437104,#437106,.T.); +#437104 = VERTEX_POINT('',#437105); +#437105 = CARTESIAN_POINT('',(146.682142,-116.899152,1.585)); +#437106 = LINE('',#437107,#437108); +#437107 = CARTESIAN_POINT('',(146.682142,-116.640819,1.585)); +#437108 = VECTOR('',#437109,1.); +#437109 = DIRECTION('',(0.,-1.,0.)); +#437110 = ORIENTED_EDGE('',*,*,#437111,.T.); +#437111 = EDGE_CURVE('',#437104,#437112,#437114,.T.); +#437112 = VERTEX_POINT('',#437113); +#437113 = CARTESIAN_POINT('',(146.859869,-116.900593,1.585)); +#437114 = LINE('',#437115,#437116); +#437115 = CARTESIAN_POINT('',(146.682142,-116.899152,1.585)); +#437116 = VECTOR('',#437117,1.); +#437117 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#437118 = ORIENTED_EDGE('',*,*,#437119,.T.); +#437119 = EDGE_CURVE('',#437112,#437120,#437122,.T.); +#437120 = VERTEX_POINT('',#437121); +#437121 = CARTESIAN_POINT('',(146.845237,-117.049152,1.585)); +#437122 = CIRCLE('',#437123,7.500006711464E-02); +#437123 = AXIS2_PLACEMENT_3D('',#437124,#437125,#437126); +#437124 = CARTESIAN_POINT('',(146.84523706711,-116.9741519328,1.585)); +#437125 = DIRECTION('',(0.,0.,-1.)); +#437126 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#437127 = ORIENTED_EDGE('',*,*,#437128,.T.); +#437128 = EDGE_CURVE('',#437120,#437129,#437131,.T.); +#437129 = VERTEX_POINT('',#437130); +#437130 = CARTESIAN_POINT('',(146.682142,-117.049152,1.585)); +#437131 = LINE('',#437132,#437133); +#437132 = CARTESIAN_POINT('',(146.845237,-117.049152,1.585)); +#437133 = VECTOR('',#437134,1.); +#437134 = DIRECTION('',(-1.,0.,0.)); +#437135 = ORIENTED_EDGE('',*,*,#437136,.T.); +#437136 = EDGE_CURVE('',#437129,#437137,#437139,.T.); +#437137 = VERTEX_POINT('',#437138); +#437138 = CARTESIAN_POINT('',(146.682142,-117.480256,1.585)); +#437139 = LINE('',#437140,#437141); +#437140 = CARTESIAN_POINT('',(146.682142,-117.049152,1.585)); +#437141 = VECTOR('',#437142,1.); +#437142 = DIRECTION('',(0.,-1.,0.)); +#437143 = ORIENTED_EDGE('',*,*,#437144,.T.); +#437144 = EDGE_CURVE('',#437137,#437145,#437147,.T.); +#437145 = VERTEX_POINT('',#437146); +#437146 = CARTESIAN_POINT('',(146.710662,-117.537298,1.585)); +#437147 = LINE('',#437148,#437149); +#437148 = CARTESIAN_POINT('',(146.682142,-117.480256,1.585)); +#437149 = VECTOR('',#437150,1.); +#437150 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#437151 = ORIENTED_EDGE('',*,*,#437152,.T.); +#437152 = EDGE_CURVE('',#437145,#437153,#437155,.T.); +#437153 = VERTEX_POINT('',#437154); +#437154 = CARTESIAN_POINT('',(146.767704,-117.565819,1.585)); +#437155 = LINE('',#437156,#437157); +#437156 = CARTESIAN_POINT('',(146.710662,-117.537298,1.585)); +#437157 = VECTOR('',#437158,1.); +#437158 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#437159 = ORIENTED_EDGE('',*,*,#437160,.T.); +#437160 = EDGE_CURVE('',#437153,#437161,#437163,.T.); +#437161 = VERTEX_POINT('',#437162); +#437162 = CARTESIAN_POINT('',(146.859869,-117.56726,1.585)); +#437163 = LINE('',#437164,#437165); +#437164 = CARTESIAN_POINT('',(146.767704,-117.565819,1.585)); +#437165 = VECTOR('',#437166,1.); +#437166 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#437167 = ORIENTED_EDGE('',*,*,#437168,.T.); +#437168 = EDGE_CURVE('',#437161,#437169,#437171,.T.); +#437169 = VERTEX_POINT('',#437170); +#437170 = CARTESIAN_POINT('',(146.845237,-117.715819,1.585)); +#437171 = CIRCLE('',#437172,7.500006711464E-02); +#437172 = AXIS2_PLACEMENT_3D('',#437173,#437174,#437175); +#437173 = CARTESIAN_POINT('',(146.84523706711,-117.6408189328,1.585)); +#437174 = DIRECTION('',(0.,0.,-1.)); +#437175 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#437176 = ORIENTED_EDGE('',*,*,#437177,.T.); +#437177 = EDGE_CURVE('',#437169,#437178,#437180,.T.); +#437178 = VERTEX_POINT('',#437179); +#437179 = CARTESIAN_POINT('',(146.730189,-117.713156,1.585)); +#437180 = LINE('',#437181,#437182); +#437181 = CARTESIAN_POINT('',(146.845237,-117.715819,1.585)); +#437182 = VECTOR('',#437183,1.); +#437183 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#437184 = ORIENTED_EDGE('',*,*,#437185,.T.); +#437185 = EDGE_CURVE('',#437178,#437186,#437188,.T.); +#437186 = VERTEX_POINT('',#437187); +#437187 = CARTESIAN_POINT('',(146.608777,-117.65245,1.585)); +#437188 = LINE('',#437189,#437190); +#437189 = CARTESIAN_POINT('',(146.730189,-117.713156,1.585)); +#437190 = VECTOR('',#437191,1.); +#437191 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#437192 = ORIENTED_EDGE('',*,*,#437193,.T.); +#437193 = EDGE_CURVE('',#437186,#437194,#437196,.T.); +#437194 = VERTEX_POINT('',#437195); +#437195 = CARTESIAN_POINT('',(146.587679,-117.626741,1.585)); +#437196 = LINE('',#437197,#437198); +#437197 = CARTESIAN_POINT('',(146.608777,-117.65245,1.585)); +#437198 = VECTOR('',#437199,1.); +#437199 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#437200 = ORIENTED_EDGE('',*,*,#437201,.T.); +#437201 = EDGE_CURVE('',#437194,#437202,#437204,.T.); +#437202 = VERTEX_POINT('',#437203); +#437203 = CARTESIAN_POINT('',(146.533583,-117.512593,1.585)); +#437204 = LINE('',#437205,#437206); +#437205 = CARTESIAN_POINT('',(146.587679,-117.626741,1.585)); +#437206 = VECTOR('',#437207,1.); +#437207 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#437208 = ORIENTED_EDGE('',*,*,#437209,.T.); +#437209 = EDGE_CURVE('',#437202,#437210,#437212,.T.); +#437210 = VERTEX_POINT('',#437211); +#437211 = CARTESIAN_POINT('',(146.532142,-117.049152,1.585)); +#437212 = LINE('',#437213,#437214); +#437213 = CARTESIAN_POINT('',(146.533583,-117.512593,1.585)); +#437214 = VECTOR('',#437215,1.); +#437215 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#437216 = ORIENTED_EDGE('',*,*,#437217,.T.); +#437217 = EDGE_CURVE('',#437210,#437218,#437220,.T.); +#437218 = VERTEX_POINT('',#437219); +#437219 = CARTESIAN_POINT('',(146.449653,-117.047711,1.585)); +#437220 = LINE('',#437221,#437222); +#437221 = CARTESIAN_POINT('',(146.532142,-117.049152,1.585)); +#437222 = VECTOR('',#437223,1.); +#437223 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#437224 = ORIENTED_EDGE('',*,*,#437225,.T.); +#437225 = EDGE_CURVE('',#437218,#437226,#437228,.T.); +#437226 = VERTEX_POINT('',#437227); +#437227 = CARTESIAN_POINT('',(146.464285,-116.899152,1.585)); +#437228 = CIRCLE('',#437229,7.500006711464E-02); +#437229 = AXIS2_PLACEMENT_3D('',#437230,#437231,#437232); +#437230 = CARTESIAN_POINT('',(146.46428493288,-116.9741520671,1.585)); +#437231 = DIRECTION('',(0.,0.,-1.)); +#437232 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#437233 = ORIENTED_EDGE('',*,*,#437234,.T.); +#437234 = EDGE_CURVE('',#437226,#437235,#437237,.T.); +#437235 = VERTEX_POINT('',#437236); +#437236 = CARTESIAN_POINT('',(146.532142,-116.899152,1.585)); +#437237 = LINE('',#437238,#437239); +#437238 = CARTESIAN_POINT('',(146.464285,-116.899152,1.585)); +#437239 = VECTOR('',#437240,1.); +#437240 = DIRECTION('',(1.,0.,0.)); +#437241 = ORIENTED_EDGE('',*,*,#437242,.T.); +#437242 = EDGE_CURVE('',#437235,#437243,#437245,.T.); +#437243 = VERTEX_POINT('',#437244); +#437244 = CARTESIAN_POINT('',(146.533583,-116.626187,1.585)); +#437245 = LINE('',#437246,#437247); +#437246 = CARTESIAN_POINT('',(146.532142,-116.899152,1.585)); +#437247 = VECTOR('',#437248,1.); +#437248 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#437249 = ORIENTED_EDGE('',*,*,#437250,.T.); +#437250 = EDGE_CURVE('',#437243,#437251,#437253,.T.); +#437251 = VERTEX_POINT('',#437252); +#437252 = CARTESIAN_POINT('',(146.544782,-116.599151,1.585)); +#437253 = LINE('',#437254,#437255); +#437254 = CARTESIAN_POINT('',(146.533583,-116.626187,1.585)); +#437255 = VECTOR('',#437256,1.); +#437256 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#437257 = ORIENTED_EDGE('',*,*,#437258,.T.); +#437258 = EDGE_CURVE('',#437251,#437093,#437259,.T.); +#437259 = LINE('',#437260,#437261); +#437260 = CARTESIAN_POINT('',(146.544782,-116.599151,1.585)); +#437261 = VECTOR('',#437262,1.); +#437262 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#437263 = PLANE('',#437264); +#437264 = AXIS2_PLACEMENT_3D('',#437265,#437266,#437267); +#437265 = CARTESIAN_POINT('',(0.,0.,1.585)); +#437266 = DIRECTION('',(0.,0.,1.)); +#437267 = DIRECTION('',(1.,0.,-0.)); +#437268 = SHELL_BASED_SURFACE_MODEL('',(#437269)); +#437269 = OPEN_SHELL('',(#437270)); +#437270 = ADVANCED_FACE('',(#437271),#437445,.T.); +#437271 = FACE_BOUND('',#437272,.F.); +#437272 = EDGE_LOOP('',(#437273,#437284,#437292,#437300,#437309,#437317, + #437325,#437333,#437341,#437349,#437358,#437366,#437374,#437382, + #437390,#437398,#437406,#437415,#437423,#437431,#437439)); +#437273 = ORIENTED_EDGE('',*,*,#437274,.T.); +#437274 = EDGE_CURVE('',#437275,#437277,#437279,.T.); +#437275 = VERTEX_POINT('',#437276); +#437276 = CARTESIAN_POINT('',(147.136903,-116.578459,1.585)); +#437277 = VERTEX_POINT('',#437278); +#437278 = CARTESIAN_POINT('',(147.253571,-116.640819,1.585)); +#437279 = CIRCLE('',#437280,7.500000000003E-02); +#437280 = AXIS2_PLACEMENT_3D('',#437281,#437282,#437283); +#437281 = CARTESIAN_POINT('',(147.178571,-116.6408190655,1.585)); +#437282 = DIRECTION('',(0.,0.,-1.)); +#437283 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#437284 = ORIENTED_EDGE('',*,*,#437285,.T.); +#437285 = EDGE_CURVE('',#437277,#437286,#437288,.T.); +#437286 = VERTEX_POINT('',#437287); +#437287 = CARTESIAN_POINT('',(147.253571,-116.899152,1.585)); +#437288 = LINE('',#437289,#437290); +#437289 = CARTESIAN_POINT('',(147.253571,-116.640819,1.585)); +#437290 = VECTOR('',#437291,1.); +#437291 = DIRECTION('',(0.,-1.,0.)); +#437292 = ORIENTED_EDGE('',*,*,#437293,.T.); +#437293 = EDGE_CURVE('',#437286,#437294,#437296,.T.); +#437294 = VERTEX_POINT('',#437295); +#437295 = CARTESIAN_POINT('',(147.431298,-116.900593,1.585)); +#437296 = LINE('',#437297,#437298); +#437297 = CARTESIAN_POINT('',(147.253571,-116.899152,1.585)); +#437298 = VECTOR('',#437299,1.); +#437299 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#437300 = ORIENTED_EDGE('',*,*,#437301,.T.); +#437301 = EDGE_CURVE('',#437294,#437302,#437304,.T.); +#437302 = VERTEX_POINT('',#437303); +#437303 = CARTESIAN_POINT('',(147.416666,-117.049152,1.585)); +#437304 = CIRCLE('',#437305,7.500006711464E-02); +#437305 = AXIS2_PLACEMENT_3D('',#437306,#437307,#437308); +#437306 = CARTESIAN_POINT('',(147.41666606711,-116.9741519328,1.585)); +#437307 = DIRECTION('',(0.,0.,-1.)); +#437308 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#437309 = ORIENTED_EDGE('',*,*,#437310,.T.); +#437310 = EDGE_CURVE('',#437302,#437311,#437313,.T.); +#437311 = VERTEX_POINT('',#437312); +#437312 = CARTESIAN_POINT('',(147.253571,-117.049152,1.585)); +#437313 = LINE('',#437314,#437315); +#437314 = CARTESIAN_POINT('',(147.416666,-117.049152,1.585)); +#437315 = VECTOR('',#437316,1.); +#437316 = DIRECTION('',(-1.,0.,0.)); +#437317 = ORIENTED_EDGE('',*,*,#437318,.T.); +#437318 = EDGE_CURVE('',#437311,#437319,#437321,.T.); +#437319 = VERTEX_POINT('',#437320); +#437320 = CARTESIAN_POINT('',(147.253571,-117.480256,1.585)); +#437321 = LINE('',#437322,#437323); +#437322 = CARTESIAN_POINT('',(147.253571,-117.049152,1.585)); +#437323 = VECTOR('',#437324,1.); +#437324 = DIRECTION('',(0.,-1.,0.)); +#437325 = ORIENTED_EDGE('',*,*,#437326,.T.); +#437326 = EDGE_CURVE('',#437319,#437327,#437329,.T.); +#437327 = VERTEX_POINT('',#437328); +#437328 = CARTESIAN_POINT('',(147.282091,-117.537298,1.585)); +#437329 = LINE('',#437330,#437331); +#437330 = CARTESIAN_POINT('',(147.253571,-117.480256,1.585)); +#437331 = VECTOR('',#437332,1.); +#437332 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#437333 = ORIENTED_EDGE('',*,*,#437334,.T.); +#437334 = EDGE_CURVE('',#437327,#437335,#437337,.T.); +#437335 = VERTEX_POINT('',#437336); +#437336 = CARTESIAN_POINT('',(147.339133,-117.565819,1.585)); +#437337 = LINE('',#437338,#437339); +#437338 = CARTESIAN_POINT('',(147.282091,-117.537298,1.585)); +#437339 = VECTOR('',#437340,1.); +#437340 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#437341 = ORIENTED_EDGE('',*,*,#437342,.T.); +#437342 = EDGE_CURVE('',#437335,#437343,#437345,.T.); +#437343 = VERTEX_POINT('',#437344); +#437344 = CARTESIAN_POINT('',(147.431298,-117.56726,1.585)); +#437345 = LINE('',#437346,#437347); +#437346 = CARTESIAN_POINT('',(147.339133,-117.565819,1.585)); +#437347 = VECTOR('',#437348,1.); +#437348 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#437349 = ORIENTED_EDGE('',*,*,#437350,.T.); +#437350 = EDGE_CURVE('',#437343,#437351,#437353,.T.); +#437351 = VERTEX_POINT('',#437352); +#437352 = CARTESIAN_POINT('',(147.416666,-117.715819,1.585)); +#437353 = CIRCLE('',#437354,7.500006711463E-02); +#437354 = AXIS2_PLACEMENT_3D('',#437355,#437356,#437357); +#437355 = CARTESIAN_POINT('',(147.41666606711,-117.6408189328,1.585)); +#437356 = DIRECTION('',(0.,0.,-1.)); +#437357 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#437358 = ORIENTED_EDGE('',*,*,#437359,.T.); +#437359 = EDGE_CURVE('',#437351,#437360,#437362,.T.); +#437360 = VERTEX_POINT('',#437361); +#437361 = CARTESIAN_POINT('',(147.301618,-117.713156,1.585)); +#437362 = LINE('',#437363,#437364); +#437363 = CARTESIAN_POINT('',(147.416666,-117.715819,1.585)); +#437364 = VECTOR('',#437365,1.); +#437365 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#437366 = ORIENTED_EDGE('',*,*,#437367,.T.); +#437367 = EDGE_CURVE('',#437360,#437368,#437370,.T.); +#437368 = VERTEX_POINT('',#437369); +#437369 = CARTESIAN_POINT('',(147.180206,-117.65245,1.585)); +#437370 = LINE('',#437371,#437372); +#437371 = CARTESIAN_POINT('',(147.301618,-117.713156,1.585)); +#437372 = VECTOR('',#437373,1.); +#437373 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#437374 = ORIENTED_EDGE('',*,*,#437375,.T.); +#437375 = EDGE_CURVE('',#437368,#437376,#437378,.T.); +#437376 = VERTEX_POINT('',#437377); +#437377 = CARTESIAN_POINT('',(147.159108,-117.626741,1.585)); +#437378 = LINE('',#437379,#437380); +#437379 = CARTESIAN_POINT('',(147.180206,-117.65245,1.585)); +#437380 = VECTOR('',#437381,1.); +#437381 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#437382 = ORIENTED_EDGE('',*,*,#437383,.T.); +#437383 = EDGE_CURVE('',#437376,#437384,#437386,.T.); +#437384 = VERTEX_POINT('',#437385); +#437385 = CARTESIAN_POINT('',(147.105012,-117.512593,1.585)); +#437386 = LINE('',#437387,#437388); +#437387 = CARTESIAN_POINT('',(147.159108,-117.626741,1.585)); +#437388 = VECTOR('',#437389,1.); +#437389 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#437390 = ORIENTED_EDGE('',*,*,#437391,.T.); +#437391 = EDGE_CURVE('',#437384,#437392,#437394,.T.); +#437392 = VERTEX_POINT('',#437393); +#437393 = CARTESIAN_POINT('',(147.103571,-117.049152,1.585)); +#437394 = LINE('',#437395,#437396); +#437395 = CARTESIAN_POINT('',(147.105012,-117.512593,1.585)); +#437396 = VECTOR('',#437397,1.); +#437397 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#437398 = ORIENTED_EDGE('',*,*,#437399,.T.); +#437399 = EDGE_CURVE('',#437392,#437400,#437402,.T.); +#437400 = VERTEX_POINT('',#437401); +#437401 = CARTESIAN_POINT('',(147.021082,-117.047711,1.585)); +#437402 = LINE('',#437403,#437404); +#437403 = CARTESIAN_POINT('',(147.103571,-117.049152,1.585)); +#437404 = VECTOR('',#437405,1.); +#437405 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#437406 = ORIENTED_EDGE('',*,*,#437407,.T.); +#437407 = EDGE_CURVE('',#437400,#437408,#437410,.T.); +#437408 = VERTEX_POINT('',#437409); +#437409 = CARTESIAN_POINT('',(147.035714,-116.899152,1.585)); +#437410 = CIRCLE('',#437411,7.500006711465E-02); +#437411 = AXIS2_PLACEMENT_3D('',#437412,#437413,#437414); +#437412 = CARTESIAN_POINT('',(147.03571393288,-116.9741520671,1.585)); +#437413 = DIRECTION('',(0.,0.,-1.)); +#437414 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#437415 = ORIENTED_EDGE('',*,*,#437416,.T.); +#437416 = EDGE_CURVE('',#437408,#437417,#437419,.T.); +#437417 = VERTEX_POINT('',#437418); +#437418 = CARTESIAN_POINT('',(147.103571,-116.899152,1.585)); +#437419 = LINE('',#437420,#437421); +#437420 = CARTESIAN_POINT('',(147.035714,-116.899152,1.585)); +#437421 = VECTOR('',#437422,1.); +#437422 = DIRECTION('',(1.,0.,0.)); +#437423 = ORIENTED_EDGE('',*,*,#437424,.T.); +#437424 = EDGE_CURVE('',#437417,#437425,#437427,.T.); +#437425 = VERTEX_POINT('',#437426); +#437426 = CARTESIAN_POINT('',(147.105012,-116.626187,1.585)); +#437427 = LINE('',#437428,#437429); +#437428 = CARTESIAN_POINT('',(147.103571,-116.899152,1.585)); +#437429 = VECTOR('',#437430,1.); +#437430 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#437431 = ORIENTED_EDGE('',*,*,#437432,.T.); +#437432 = EDGE_CURVE('',#437425,#437433,#437435,.T.); +#437433 = VERTEX_POINT('',#437434); +#437434 = CARTESIAN_POINT('',(147.116211,-116.599151,1.585)); +#437435 = LINE('',#437436,#437437); +#437436 = CARTESIAN_POINT('',(147.105012,-116.626187,1.585)); +#437437 = VECTOR('',#437438,1.); +#437438 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#437439 = ORIENTED_EDGE('',*,*,#437440,.T.); +#437440 = EDGE_CURVE('',#437433,#437275,#437441,.T.); +#437441 = LINE('',#437442,#437443); +#437442 = CARTESIAN_POINT('',(147.116211,-116.599151,1.585)); +#437443 = VECTOR('',#437444,1.); +#437444 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#437445 = PLANE('',#437446); +#437446 = AXIS2_PLACEMENT_3D('',#437447,#437448,#437449); +#437447 = CARTESIAN_POINT('',(0.,0.,1.585)); +#437448 = DIRECTION('',(0.,0.,1.)); +#437449 = DIRECTION('',(1.,0.,-0.)); +#437450 = SHELL_BASED_SURFACE_MODEL('',(#437451)); +#437451 = OPEN_SHELL('',(#437452)); +#437452 = ADVANCED_FACE('',(#437453,#437571,#437638),#437690,.T.); +#437453 = FACE_BOUND('',#437454,.F.); +#437454 = EDGE_LOOP('',(#437455,#437466,#437474,#437483,#437491,#437499, + #437507,#437515,#437523,#437532,#437540,#437549,#437557,#437565)); +#437455 = ORIENTED_EDGE('',*,*,#437456,.T.); +#437456 = EDGE_CURVE('',#437457,#437459,#437461,.T.); +#437457 = VERTEX_POINT('',#437458); +#437458 = CARTESIAN_POINT('',(144.628821,-116.626187,1.585)); +#437459 = VERTEX_POINT('',#437460); +#437460 = CARTESIAN_POINT('',(144.70238,-116.565819,1.585)); +#437461 = CIRCLE('',#437462,7.500074938989E-02); +#437462 = AXIS2_PLACEMENT_3D('',#437463,#437464,#437465); +#437463 = CARTESIAN_POINT('',(144.70238046611,-116.6408197493,1.585)); +#437464 = DIRECTION('',(0.,0.,-1.)); +#437465 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#437466 = ORIENTED_EDGE('',*,*,#437467,.T.); +#437467 = EDGE_CURVE('',#437459,#437468,#437470,.T.); +#437468 = VERTEX_POINT('',#437469); +#437469 = CARTESIAN_POINT('',(145.050345,-116.56726,1.585)); +#437470 = LINE('',#437471,#437472); +#437471 = CARTESIAN_POINT('',(144.70238,-116.565819,1.585)); +#437472 = VECTOR('',#437473,1.); +#437473 = DIRECTION('',(0.999991425254,-4.141185589905E-03,0.)); +#437474 = ORIENTED_EDGE('',*,*,#437475,.T.); +#437475 = EDGE_CURVE('',#437468,#437476,#437478,.T.); +#437476 = VERTEX_POINT('',#437477); +#437477 = CARTESIAN_POINT('',(145.299748,-116.816663,1.585)); +#437478 = CIRCLE('',#437479,0.347870264855); +#437479 = AXIS2_PLACEMENT_3D('',#437480,#437481,#437482); +#437480 = CARTESIAN_POINT('',(144.96301726502,-116.9039907349,1.585)); +#437481 = DIRECTION('',(0.,0.,-1.)); +#437482 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#437483 = ORIENTED_EDGE('',*,*,#437484,.T.); +#437484 = EDGE_CURVE('',#437476,#437485,#437487,.T.); +#437485 = VERTEX_POINT('',#437486); +#437486 = CARTESIAN_POINT('',(145.298526,-116.946343,1.585)); +#437487 = LINE('',#437488,#437489); +#437488 = CARTESIAN_POINT('',(145.299748,-116.816663,1.585)); +#437489 = VECTOR('',#437490,1.); +#437490 = DIRECTION('',(-9.422777212105E-03,-0.999955604649,0.)); +#437491 = ORIENTED_EDGE('',*,*,#437492,.T.); +#437492 = EDGE_CURVE('',#437485,#437493,#437495,.T.); +#437493 = VERTEX_POINT('',#437494); +#437494 = CARTESIAN_POINT('',(145.236321,-117.069054,1.585)); +#437495 = LINE('',#437496,#437497); +#437496 = CARTESIAN_POINT('',(145.298526,-116.946343,1.585)); +#437497 = VECTOR('',#437498,1.); +#437498 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#437499 = ORIENTED_EDGE('',*,*,#437500,.T.); +#437500 = EDGE_CURVE('',#437493,#437501,#437503,.T.); +#437501 = VERTEX_POINT('',#437502); +#437502 = CARTESIAN_POINT('',(145.209644,-117.096762,1.585)); +#437503 = LINE('',#437504,#437505); +#437504 = CARTESIAN_POINT('',(145.236321,-117.069054,1.585)); +#437505 = VECTOR('',#437506,1.); +#437506 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#437507 = ORIENTED_EDGE('',*,*,#437508,.T.); +#437508 = EDGE_CURVE('',#437501,#437509,#437511,.T.); +#437509 = VERTEX_POINT('',#437510); +#437510 = CARTESIAN_POINT('',(145.231603,-117.111595,1.585)); +#437511 = LINE('',#437512,#437513); +#437512 = CARTESIAN_POINT('',(145.209644,-117.096762,1.585)); +#437513 = VECTOR('',#437514,1.); +#437514 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#437515 = ORIENTED_EDGE('',*,*,#437516,.T.); +#437516 = EDGE_CURVE('',#437509,#437517,#437519,.T.); +#437517 = VERTEX_POINT('',#437518); +#437518 = CARTESIAN_POINT('',(145.293271,-117.178706,1.585)); +#437519 = LINE('',#437520,#437521); +#437520 = CARTESIAN_POINT('',(145.231603,-117.111595,1.585)); +#437521 = VECTOR('',#437522,1.); +#437522 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#437523 = ORIENTED_EDGE('',*,*,#437524,.T.); +#437524 = EDGE_CURVE('',#437517,#437525,#437527,.T.); +#437525 = VERTEX_POINT('',#437526); +#437526 = CARTESIAN_POINT('',(145.28394,-117.592863,1.585)); +#437527 = CIRCLE('',#437528,0.341850333486); +#437528 = AXIS2_PLACEMENT_3D('',#437529,#437530,#437531); +#437529 = CARTESIAN_POINT('',(145.01672159864,-117.3796589276,1.585)); +#437530 = DIRECTION('',(0.,0.,-1.)); +#437531 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#437532 = ORIENTED_EDGE('',*,*,#437533,.T.); +#437533 = EDGE_CURVE('',#437525,#437534,#437536,.T.); +#437534 = VERTEX_POINT('',#437535); +#437535 = CARTESIAN_POINT('',(145.21841,-117.656317,1.585)); +#437536 = LINE('',#437537,#437538); +#437537 = CARTESIAN_POINT('',(145.28394,-117.592863,1.585)); +#437538 = VECTOR('',#437539,1.); +#437539 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#437540 = ORIENTED_EDGE('',*,*,#437541,.T.); +#437541 = EDGE_CURVE('',#437534,#437542,#437544,.T.); +#437542 = VERTEX_POINT('',#437543); +#437543 = CARTESIAN_POINT('',(144.660712,-117.703179,1.585)); +#437544 = CIRCLE('',#437545,0.612118292739); +#437545 = AXIS2_PLACEMENT_3D('',#437546,#437547,#437548); +#437546 = CARTESIAN_POINT('',(144.89397614383,-117.1372491072,1.585)); +#437547 = DIRECTION('',(-0.,0.,-1.)); +#437548 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#437549 = ORIENTED_EDGE('',*,*,#437550,.T.); +#437550 = EDGE_CURVE('',#437542,#437551,#437553,.T.); +#437551 = VERTEX_POINT('',#437552); +#437552 = CARTESIAN_POINT('',(144.64002,-117.682487,1.585)); +#437553 = LINE('',#437554,#437555); +#437554 = CARTESIAN_POINT('',(144.660712,-117.703179,1.585)); +#437555 = VECTOR('',#437556,1.); +#437556 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#437557 = ORIENTED_EDGE('',*,*,#437558,.T.); +#437558 = EDGE_CURVE('',#437551,#437559,#437561,.T.); +#437559 = VERTEX_POINT('',#437560); +#437560 = CARTESIAN_POINT('',(144.62738,-117.640819,1.585)); +#437561 = LINE('',#437562,#437563); +#437562 = CARTESIAN_POINT('',(144.64002,-117.682487,1.585)); +#437563 = VECTOR('',#437564,1.); +#437564 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#437565 = ORIENTED_EDGE('',*,*,#437566,.T.); +#437566 = EDGE_CURVE('',#437559,#437457,#437567,.T.); +#437567 = LINE('',#437568,#437569); +#437568 = CARTESIAN_POINT('',(144.62738,-117.640819,1.585)); +#437569 = VECTOR('',#437570,1.); +#437570 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#437571 = FACE_BOUND('',#437572,.F.); +#437572 = EDGE_LOOP('',(#437573,#437583,#437591,#437599,#437607,#437616, + #437624,#437632)); +#437573 = ORIENTED_EDGE('',*,*,#437574,.T.); +#437574 = EDGE_CURVE('',#437575,#437577,#437579,.T.); +#437575 = VERTEX_POINT('',#437576); +#437576 = CARTESIAN_POINT('',(145.138056,-117.23018,1.585)); +#437577 = VERTEX_POINT('',#437578); +#437578 = CARTESIAN_POINT('',(145.023543,-117.192009,1.585)); +#437579 = LINE('',#437580,#437581); +#437580 = CARTESIAN_POINT('',(145.138056,-117.23018,1.585)); +#437581 = VECTOR('',#437582,1.); +#437582 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#437583 = ORIENTED_EDGE('',*,*,#437584,.T.); +#437584 = EDGE_CURVE('',#437577,#437585,#437587,.T.); +#437585 = VERTEX_POINT('',#437586); +#437586 = CARTESIAN_POINT('',(144.77738,-117.192009,1.585)); +#437587 = LINE('',#437588,#437589); +#437588 = CARTESIAN_POINT('',(145.023543,-117.192009,1.585)); +#437589 = VECTOR('',#437590,1.); +#437590 = DIRECTION('',(-1.,0.,0.)); +#437591 = ORIENTED_EDGE('',*,*,#437592,.T.); +#437592 = EDGE_CURVE('',#437585,#437593,#437595,.T.); +#437593 = VERTEX_POINT('',#437594); +#437594 = CARTESIAN_POINT('',(144.77738,-117.565819,1.585)); +#437595 = LINE('',#437596,#437597); +#437596 = CARTESIAN_POINT('',(144.77738,-117.192009,1.585)); +#437597 = VECTOR('',#437598,1.); +#437598 = DIRECTION('',(0.,-1.,0.)); +#437599 = ORIENTED_EDGE('',*,*,#437600,.T.); +#437600 = EDGE_CURVE('',#437593,#437601,#437603,.T.); +#437601 = VERTEX_POINT('',#437602); +#437602 = CARTESIAN_POINT('',(145.065627,-117.565819,1.585)); +#437603 = LINE('',#437604,#437605); +#437604 = CARTESIAN_POINT('',(144.77738,-117.565819,1.585)); +#437605 = VECTOR('',#437606,1.); +#437606 = DIRECTION('',(1.,0.,0.)); +#437607 = ORIENTED_EDGE('',*,*,#437608,.T.); +#437608 = EDGE_CURVE('',#437601,#437609,#437611,.T.); +#437609 = VERTEX_POINT('',#437610); +#437610 = CARTESIAN_POINT('',(145.198808,-117.432637,1.585)); +#437611 = CIRCLE('',#437612,0.186867760544); +#437612 = AXIS2_PLACEMENT_3D('',#437613,#437614,#437615); +#437613 = CARTESIAN_POINT('',(145.01808796928,-117.3850993262,1.585)); +#437614 = DIRECTION('',(0.,0.,1.)); +#437615 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#437616 = ORIENTED_EDGE('',*,*,#437617,.T.); +#437617 = EDGE_CURVE('',#437609,#437618,#437620,.T.); +#437618 = VERTEX_POINT('',#437619); +#437619 = CARTESIAN_POINT('',(145.198808,-117.32519,1.585)); +#437620 = LINE('',#437621,#437622); +#437621 = CARTESIAN_POINT('',(145.198808,-117.432637,1.585)); +#437622 = VECTOR('',#437623,1.); +#437623 = DIRECTION('',(0.,1.,0.)); +#437624 = ORIENTED_EDGE('',*,*,#437625,.T.); +#437625 = EDGE_CURVE('',#437618,#437626,#437628,.T.); +#437626 = VERTEX_POINT('',#437627); +#437627 = CARTESIAN_POINT('',(145.16455,-117.256674,1.585)); +#437628 = LINE('',#437629,#437630); +#437629 = CARTESIAN_POINT('',(145.198808,-117.32519,1.585)); +#437630 = VECTOR('',#437631,1.); +#437631 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#437632 = ORIENTED_EDGE('',*,*,#437633,.T.); +#437633 = EDGE_CURVE('',#437626,#437575,#437634,.T.); +#437634 = LINE('',#437635,#437636); +#437635 = CARTESIAN_POINT('',(145.16455,-117.256674,1.585)); +#437636 = VECTOR('',#437637,1.); +#437637 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#437638 = FACE_BOUND('',#437639,.F.); +#437639 = EDGE_LOOP('',(#437640,#437651,#437659,#437667,#437675,#437684) + ); +#437640 = ORIENTED_EDGE('',*,*,#437641,.T.); +#437641 = EDGE_CURVE('',#437642,#437644,#437646,.T.); +#437642 = VERTEX_POINT('',#437643); +#437643 = CARTESIAN_POINT('',(145.151189,-116.849,1.585)); +#437644 = VERTEX_POINT('',#437645); +#437645 = CARTESIAN_POINT('',(145.018008,-116.715819,1.585)); +#437646 = CIRCLE('',#437647,0.18686440374); +#437647 = AXIS2_PLACEMENT_3D('',#437648,#437649,#437650); +#437648 = CARTESIAN_POINT('',(144.970472,-116.896536,1.585)); +#437649 = DIRECTION('',(0.,0.,1.)); +#437650 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#437651 = ORIENTED_EDGE('',*,*,#437652,.T.); +#437652 = EDGE_CURVE('',#437644,#437653,#437655,.T.); +#437653 = VERTEX_POINT('',#437654); +#437654 = CARTESIAN_POINT('',(144.77738,-116.715819,1.585)); +#437655 = LINE('',#437656,#437657); +#437656 = CARTESIAN_POINT('',(145.018008,-116.715819,1.585)); +#437657 = VECTOR('',#437658,1.); +#437658 = DIRECTION('',(-1.,0.,0.)); +#437659 = ORIENTED_EDGE('',*,*,#437660,.T.); +#437660 = EDGE_CURVE('',#437653,#437661,#437663,.T.); +#437661 = VERTEX_POINT('',#437662); +#437662 = CARTESIAN_POINT('',(144.77738,-117.042009,1.585)); +#437663 = LINE('',#437664,#437665); +#437664 = CARTESIAN_POINT('',(144.77738,-116.715819,1.585)); +#437665 = VECTOR('',#437666,1.); +#437666 = DIRECTION('',(0.,-1.,0.)); +#437667 = ORIENTED_EDGE('',*,*,#437668,.T.); +#437668 = EDGE_CURVE('',#437661,#437669,#437671,.T.); +#437669 = VERTEX_POINT('',#437670); +#437670 = CARTESIAN_POINT('',(145.018008,-117.042009,1.585)); +#437671 = LINE('',#437672,#437673); +#437672 = CARTESIAN_POINT('',(144.77738,-117.042009,1.585)); +#437673 = VECTOR('',#437674,1.); +#437674 = DIRECTION('',(1.,0.,0.)); +#437675 = ORIENTED_EDGE('',*,*,#437676,.T.); +#437676 = EDGE_CURVE('',#437669,#437677,#437679,.T.); +#437677 = VERTEX_POINT('',#437678); +#437678 = CARTESIAN_POINT('',(145.151189,-116.908828,1.585)); +#437679 = CIRCLE('',#437680,0.18686440374); +#437680 = AXIS2_PLACEMENT_3D('',#437681,#437682,#437683); +#437681 = CARTESIAN_POINT('',(144.970472,-116.861292,1.585)); +#437682 = DIRECTION('',(0.,0.,1.)); +#437683 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#437684 = ORIENTED_EDGE('',*,*,#437685,.T.); +#437685 = EDGE_CURVE('',#437677,#437642,#437686,.T.); +#437686 = LINE('',#437687,#437688); +#437687 = CARTESIAN_POINT('',(145.151189,-116.908828,1.585)); +#437688 = VECTOR('',#437689,1.); +#437689 = DIRECTION('',(0.,1.,0.)); +#437690 = PLANE('',#437691); +#437691 = AXIS2_PLACEMENT_3D('',#437692,#437693,#437694); +#437692 = CARTESIAN_POINT('',(0.,0.,1.585)); +#437693 = DIRECTION('',(0.,0.,1.)); +#437694 = DIRECTION('',(1.,0.,-0.)); +#437695 = SHELL_BASED_SURFACE_MODEL('',(#437696)); +#437696 = OPEN_SHELL('',(#437697)); +#437697 = ADVANCED_FACE('',(#437698),#437840,.T.); +#437698 = FACE_BOUND('',#437699,.F.); +#437699 = EDGE_LOOP('',(#437700,#437711,#437719,#437727,#437735,#437743, + #437751,#437759,#437767,#437776,#437784,#437793,#437801,#437809, + #437817,#437825,#437834)); +#437700 = ORIENTED_EDGE('',*,*,#437701,.T.); +#437701 = EDGE_CURVE('',#437702,#437704,#437706,.T.); +#437702 = VERTEX_POINT('',#437703); +#437703 = CARTESIAN_POINT('',(145.660712,-116.911792,1.585)); +#437704 = VERTEX_POINT('',#437705); +#437705 = CARTESIAN_POINT('',(145.77738,-116.974152,1.585)); +#437706 = CIRCLE('',#437707,7.500000000002E-02); +#437707 = AXIS2_PLACEMENT_3D('',#437708,#437709,#437710); +#437708 = CARTESIAN_POINT('',(145.70238,-116.9741520655,1.585)); +#437709 = DIRECTION('',(0.,0.,-1.)); +#437710 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#437711 = ORIENTED_EDGE('',*,*,#437712,.T.); +#437712 = EDGE_CURVE('',#437704,#437713,#437715,.T.); +#437713 = VERTEX_POINT('',#437714); +#437714 = CARTESIAN_POINT('',(145.77738,-117.480256,1.585)); +#437715 = LINE('',#437716,#437717); +#437716 = CARTESIAN_POINT('',(145.77738,-116.974152,1.585)); +#437717 = VECTOR('',#437718,1.); +#437718 = DIRECTION('',(0.,-1.,0.)); +#437719 = ORIENTED_EDGE('',*,*,#437720,.T.); +#437720 = EDGE_CURVE('',#437713,#437721,#437723,.T.); +#437721 = VERTEX_POINT('',#437722); +#437722 = CARTESIAN_POINT('',(145.8059,-117.537298,1.585)); +#437723 = LINE('',#437724,#437725); +#437724 = CARTESIAN_POINT('',(145.77738,-117.480256,1.585)); +#437725 = VECTOR('',#437726,1.); +#437726 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#437727 = ORIENTED_EDGE('',*,*,#437728,.T.); +#437728 = EDGE_CURVE('',#437721,#437729,#437731,.T.); +#437729 = VERTEX_POINT('',#437730); +#437730 = CARTESIAN_POINT('',(145.862942,-117.565819,1.585)); +#437731 = LINE('',#437732,#437733); +#437732 = CARTESIAN_POINT('',(145.8059,-117.537298,1.585)); +#437733 = VECTOR('',#437734,1.); +#437734 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#437735 = ORIENTED_EDGE('',*,*,#437736,.T.); +#437736 = EDGE_CURVE('',#437729,#437737,#437739,.T.); +#437737 = VERTEX_POINT('',#437738); +#437738 = CARTESIAN_POINT('',(145.970389,-117.565819,1.585)); +#437739 = LINE('',#437740,#437741); +#437740 = CARTESIAN_POINT('',(145.862942,-117.565819,1.585)); +#437741 = VECTOR('',#437742,1.); +#437742 = DIRECTION('',(1.,0.,0.)); +#437743 = ORIENTED_EDGE('',*,*,#437744,.T.); +#437744 = EDGE_CURVE('',#437737,#437745,#437747,.T.); +#437745 = VERTEX_POINT('',#437746); +#437746 = CARTESIAN_POINT('',(146.038904,-117.531561,1.585)); +#437747 = LINE('',#437748,#437749); +#437748 = CARTESIAN_POINT('',(145.970389,-117.565819,1.585)); +#437749 = VECTOR('',#437750,1.); +#437750 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#437751 = ORIENTED_EDGE('',*,*,#437752,.T.); +#437752 = EDGE_CURVE('',#437745,#437753,#437755,.T.); +#437753 = VERTEX_POINT('',#437754); +#437754 = CARTESIAN_POINT('',(146.055951,-117.514514,1.585)); +#437755 = LINE('',#437756,#437757); +#437756 = CARTESIAN_POINT('',(146.038904,-117.531561,1.585)); +#437757 = VECTOR('',#437758,1.); +#437758 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#437759 = ORIENTED_EDGE('',*,*,#437760,.T.); +#437760 = EDGE_CURVE('',#437753,#437761,#437763,.T.); +#437761 = VERTEX_POINT('',#437762); +#437762 = CARTESIAN_POINT('',(146.057392,-116.95952,1.585)); +#437763 = LINE('',#437764,#437765); +#437764 = CARTESIAN_POINT('',(146.055951,-117.514514,1.585)); +#437765 = VECTOR('',#437766,1.); +#437766 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#437767 = ORIENTED_EDGE('',*,*,#437768,.T.); +#437768 = EDGE_CURVE('',#437761,#437769,#437771,.T.); +#437769 = VERTEX_POINT('',#437770); +#437770 = CARTESIAN_POINT('',(146.205951,-116.974152,1.585)); +#437771 = CIRCLE('',#437772,7.500006711464E-02); +#437772 = AXIS2_PLACEMENT_3D('',#437773,#437774,#437775); +#437773 = CARTESIAN_POINT('',(146.13095093288,-116.9741519328,1.585)); +#437774 = DIRECTION('',(0.,0.,-1.)); +#437775 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#437776 = ORIENTED_EDGE('',*,*,#437777,.T.); +#437777 = EDGE_CURVE('',#437769,#437778,#437780,.T.); +#437778 = VERTEX_POINT('',#437779); +#437779 = CARTESIAN_POINT('',(146.20451,-117.655451,1.585)); +#437780 = LINE('',#437781,#437782); +#437781 = CARTESIAN_POINT('',(146.205951,-116.974152,1.585)); +#437782 = VECTOR('',#437783,1.); +#437783 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#437784 = ORIENTED_EDGE('',*,*,#437785,.T.); +#437785 = EDGE_CURVE('',#437778,#437786,#437788,.T.); +#437786 = VERTEX_POINT('',#437787); +#437787 = CARTESIAN_POINT('',(146.069881,-117.683777,1.585)); +#437788 = CIRCLE('',#437789,7.472335361469E-02); +#437789 = AXIS2_PLACEMENT_3D('',#437790,#437791,#437792); +#437790 = CARTESIAN_POINT('',(146.13118658714,-117.6410545871,1.585)); +#437791 = DIRECTION('',(-0.,0.,-1.)); +#437792 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#437793 = ORIENTED_EDGE('',*,*,#437794,.T.); +#437794 = EDGE_CURVE('',#437786,#437795,#437797,.T.); +#437795 = VERTEX_POINT('',#437796); +#437796 = CARTESIAN_POINT('',(146.002726,-117.714378,1.585)); +#437797 = LINE('',#437798,#437799); +#437798 = CARTESIAN_POINT('',(146.069881,-117.683777,1.585)); +#437799 = VECTOR('',#437800,1.); +#437800 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#437801 = ORIENTED_EDGE('',*,*,#437802,.T.); +#437802 = EDGE_CURVE('',#437795,#437803,#437805,.T.); +#437803 = VERTEX_POINT('',#437804); +#437804 = CARTESIAN_POINT('',(145.825427,-117.713156,1.585)); +#437805 = LINE('',#437806,#437807); +#437806 = CARTESIAN_POINT('',(146.002726,-117.714378,1.585)); +#437807 = VECTOR('',#437808,1.); +#437808 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#437809 = ORIENTED_EDGE('',*,*,#437810,.T.); +#437810 = EDGE_CURVE('',#437803,#437811,#437813,.T.); +#437811 = VERTEX_POINT('',#437812); +#437812 = CARTESIAN_POINT('',(145.704015,-117.65245,1.585)); +#437813 = LINE('',#437814,#437815); +#437814 = CARTESIAN_POINT('',(145.825427,-117.713156,1.585)); +#437815 = VECTOR('',#437816,1.); +#437816 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#437817 = ORIENTED_EDGE('',*,*,#437818,.T.); +#437818 = EDGE_CURVE('',#437811,#437819,#437821,.T.); +#437819 = VERTEX_POINT('',#437820); +#437820 = CARTESIAN_POINT('',(145.682917,-117.626741,1.585)); +#437821 = LINE('',#437822,#437823); +#437822 = CARTESIAN_POINT('',(145.704015,-117.65245,1.585)); +#437823 = VECTOR('',#437824,1.); +#437824 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#437825 = ORIENTED_EDGE('',*,*,#437826,.T.); +#437826 = EDGE_CURVE('',#437819,#437827,#437829,.T.); +#437827 = VERTEX_POINT('',#437828); +#437828 = CARTESIAN_POINT('',(145.64002,-116.932484,1.585)); +#437829 = CIRCLE('',#437830,0.780471555046); +#437830 = AXIS2_PLACEMENT_3D('',#437831,#437832,#437833); +#437831 = CARTESIAN_POINT('',(146.35883564714,-117.2365233291,1.585)); +#437832 = DIRECTION('',(0.,0.,-1.)); +#437833 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#437834 = ORIENTED_EDGE('',*,*,#437835,.T.); +#437835 = EDGE_CURVE('',#437827,#437702,#437836,.T.); +#437836 = LINE('',#437837,#437838); +#437837 = CARTESIAN_POINT('',(145.64002,-116.932484,1.585)); +#437838 = VECTOR('',#437839,1.); +#437839 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#437840 = PLANE('',#437841); +#437841 = AXIS2_PLACEMENT_3D('',#437842,#437843,#437844); +#437842 = CARTESIAN_POINT('',(0.,0.,1.585)); +#437843 = DIRECTION('',(0.,0.,1.)); +#437844 = DIRECTION('',(1.,0.,-0.)); +#437845 = SHELL_BASED_SURFACE_MODEL('',(#437846)); +#437846 = OPEN_SHELL('',(#437847)); +#437847 = ADVANCED_FACE('',(#437848,#437925),#438002,.T.); +#437848 = FACE_BOUND('',#437849,.F.); +#437849 = EDGE_LOOP('',(#437850,#437861,#437869,#437877,#437886,#437894, + #437903,#437911,#437919)); +#437850 = ORIENTED_EDGE('',*,*,#437851,.T.); +#437851 = EDGE_CURVE('',#437852,#437854,#437856,.T.); +#437852 = VERTEX_POINT('',#437853); +#437853 = CARTESIAN_POINT('',(147.757778,-116.958653,1.585)); +#437854 = VERTEX_POINT('',#437855); +#437855 = CARTESIAN_POINT('',(148.241688,-117.029549,1.585)); +#437856 = CIRCLE('',#437857,0.34461174713); +#437857 = AXIS2_PLACEMENT_3D('',#437858,#437859,#437860); +#437858 = CARTESIAN_POINT('',(147.96453494377,-117.2343499757,1.585)); +#437859 = DIRECTION('',(0.,0.,-1.)); +#437860 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#437861 = ORIENTED_EDGE('',*,*,#437862,.T.); +#437862 = EDGE_CURVE('',#437854,#437863,#437865,.T.); +#437863 = VERTEX_POINT('',#437864); +#437864 = CARTESIAN_POINT('',(148.299749,-117.149996,1.585)); +#437865 = LINE('',#437866,#437867); +#437866 = CARTESIAN_POINT('',(148.241688,-117.029549,1.585)); +#437867 = VECTOR('',#437868,1.); +#437868 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#437869 = ORIENTED_EDGE('',*,*,#437870,.T.); +#437870 = EDGE_CURVE('',#437863,#437871,#437873,.T.); +#437871 = VERTEX_POINT('',#437872); +#437872 = CARTESIAN_POINT('',(148.298527,-117.470152,1.585)); +#437873 = LINE('',#437874,#437875); +#437874 = CARTESIAN_POINT('',(148.299749,-117.149996,1.585)); +#437875 = VECTOR('',#437876,1.); +#437876 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#437877 = ORIENTED_EDGE('',*,*,#437878,.T.); +#437878 = EDGE_CURVE('',#437871,#437879,#437881,.T.); +#437879 = VERTEX_POINT('',#437880); +#437880 = CARTESIAN_POINT('',(148.050346,-117.714378,1.585)); +#437881 = CIRCLE('',#437882,0.348635327447); +#437882 = AXIS2_PLACEMENT_3D('',#437883,#437884,#437885); +#437883 = CARTESIAN_POINT('',(147.96257448129,-117.3769720841,1.585)); +#437884 = DIRECTION('',(0.,0.,-1.)); +#437885 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#437886 = ORIENTED_EDGE('',*,*,#437887,.T.); +#437887 = EDGE_CURVE('',#437879,#437888,#437890,.T.); +#437888 = VERTEX_POINT('',#437889); +#437889 = CARTESIAN_POINT('',(147.873047,-117.713156,1.585)); +#437890 = LINE('',#437891,#437892); +#437891 = CARTESIAN_POINT('',(148.050346,-117.714378,1.585)); +#437892 = VECTOR('',#437893,1.); +#437893 = DIRECTION('',(-0.999976248865,6.892148157133E-03,0.)); +#437894 = ORIENTED_EDGE('',*,*,#437895,.T.); +#437895 = EDGE_CURVE('',#437888,#437896,#437898,.T.); +#437896 = VERTEX_POINT('',#437897); +#437897 = CARTESIAN_POINT('',(147.628822,-117.464974,1.585)); +#437898 = CIRCLE('',#437899,0.348628446662); +#437899 = AXIS2_PLACEMENT_3D('',#437900,#437901,#437902); +#437900 = CARTESIAN_POINT('',(147.96622261322,-117.3772094284,1.585)); +#437901 = DIRECTION('',(0.,0.,-1.)); +#437902 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#437903 = ORIENTED_EDGE('',*,*,#437904,.T.); +#437904 = EDGE_CURVE('',#437896,#437905,#437907,.T.); +#437905 = VERTEX_POINT('',#437906); +#437906 = CARTESIAN_POINT('',(147.630044,-117.144819,1.585)); +#437907 = LINE('',#437908,#437909); +#437908 = CARTESIAN_POINT('',(147.628822,-117.464974,1.585)); +#437909 = VECTOR('',#437910,1.); +#437910 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#437911 = ORIENTED_EDGE('',*,*,#437912,.T.); +#437912 = EDGE_CURVE('',#437905,#437913,#437915,.T.); +#437913 = VERTEX_POINT('',#437914); +#437914 = CARTESIAN_POINT('',(147.692248,-117.022106,1.585)); +#437915 = LINE('',#437916,#437917); +#437916 = CARTESIAN_POINT('',(147.630044,-117.144819,1.585)); +#437917 = VECTOR('',#437918,1.); +#437918 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#437919 = ORIENTED_EDGE('',*,*,#437920,.T.); +#437920 = EDGE_CURVE('',#437913,#437852,#437921,.T.); +#437921 = LINE('',#437922,#437923); +#437922 = CARTESIAN_POINT('',(147.692248,-117.022106,1.585)); +#437923 = VECTOR('',#437924,1.); +#437924 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#437925 = FACE_BOUND('',#437926,.F.); +#437926 = EDGE_LOOP('',(#437927,#437938,#437946,#437954,#437963,#437971, + #437980,#437988,#437996)); +#437927 = ORIENTED_EDGE('',*,*,#437928,.T.); +#437928 = EDGE_CURVE('',#437929,#437931,#437933,.T.); +#437929 = VERTEX_POINT('',#437930); +#437930 = CARTESIAN_POINT('',(148.086525,-117.08341,1.585)); +#437931 = VERTEX_POINT('',#437932); +#437932 = CARTESIAN_POINT('',(147.811639,-117.113817,1.585)); +#437933 = CIRCLE('',#437934,0.198386215365); +#437934 = AXIS2_PLACEMENT_3D('',#437935,#437936,#437937); +#437935 = CARTESIAN_POINT('',(147.96472195783,-117.2400021753,1.585)); +#437936 = DIRECTION('',(0.,0.,1.)); +#437937 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#437938 = ORIENTED_EDGE('',*,*,#437939,.T.); +#437939 = EDGE_CURVE('',#437931,#437940,#437942,.T.); +#437940 = VERTEX_POINT('',#437941); +#437941 = CARTESIAN_POINT('',(147.777381,-117.182333,1.585)); +#437942 = LINE('',#437943,#437944); +#437943 = CARTESIAN_POINT('',(147.811639,-117.113817,1.585)); +#437944 = VECTOR('',#437945,1.); +#437945 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#437946 = ORIENTED_EDGE('',*,*,#437947,.T.); +#437947 = EDGE_CURVE('',#437940,#437948,#437950,.T.); +#437948 = VERTEX_POINT('',#437949); +#437949 = CARTESIAN_POINT('',(147.777381,-117.432637,1.585)); +#437950 = LINE('',#437951,#437952); +#437951 = CARTESIAN_POINT('',(147.777381,-117.182333,1.585)); +#437952 = VECTOR('',#437953,1.); +#437953 = DIRECTION('',(0.,-1.,0.)); +#437954 = ORIENTED_EDGE('',*,*,#437955,.T.); +#437955 = EDGE_CURVE('',#437948,#437956,#437958,.T.); +#437956 = VERTEX_POINT('',#437957); +#437957 = CARTESIAN_POINT('',(147.910562,-117.565819,1.585)); +#437958 = CIRCLE('',#437959,0.186867373533); +#437959 = AXIS2_PLACEMENT_3D('',#437960,#437961,#437962); +#437960 = CARTESIAN_POINT('',(147.95810071388,-117.385099643,1.585)); +#437961 = DIRECTION('',(0.,0.,1.)); +#437962 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#437963 = ORIENTED_EDGE('',*,*,#437964,.T.); +#437964 = EDGE_CURVE('',#437956,#437965,#437967,.T.); +#437965 = VERTEX_POINT('',#437966); +#437966 = CARTESIAN_POINT('',(148.018009,-117.565819,1.585)); +#437967 = LINE('',#437968,#437969); +#437968 = CARTESIAN_POINT('',(147.910562,-117.565819,1.585)); +#437969 = VECTOR('',#437970,1.); +#437970 = DIRECTION('',(1.,0.,0.)); +#437971 = ORIENTED_EDGE('',*,*,#437972,.T.); +#437972 = EDGE_CURVE('',#437965,#437973,#437975,.T.); +#437973 = VERTEX_POINT('',#437974); +#437974 = CARTESIAN_POINT('',(148.15119,-117.432637,1.585)); +#437975 = CIRCLE('',#437976,0.186867760544); +#437976 = AXIS2_PLACEMENT_3D('',#437977,#437978,#437979); +#437977 = CARTESIAN_POINT('',(147.97046996928,-117.3850993262,1.585)); +#437978 = DIRECTION('',(0.,0.,1.)); +#437979 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#437980 = ORIENTED_EDGE('',*,*,#437981,.T.); +#437981 = EDGE_CURVE('',#437973,#437982,#437984,.T.); +#437982 = VERTEX_POINT('',#437983); +#437983 = CARTESIAN_POINT('',(148.15119,-117.182333,1.585)); +#437984 = LINE('',#437985,#437986); +#437985 = CARTESIAN_POINT('',(148.15119,-117.432637,1.585)); +#437986 = VECTOR('',#437987,1.); +#437987 = DIRECTION('',(0.,1.,0.)); +#437988 = ORIENTED_EDGE('',*,*,#437989,.T.); +#437989 = EDGE_CURVE('',#437982,#437990,#437992,.T.); +#437990 = VERTEX_POINT('',#437991); +#437991 = CARTESIAN_POINT('',(148.116932,-117.113817,1.585)); +#437992 = LINE('',#437993,#437994); +#437993 = CARTESIAN_POINT('',(148.15119,-117.182333,1.585)); +#437994 = VECTOR('',#437995,1.); +#437995 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#437996 = ORIENTED_EDGE('',*,*,#437997,.T.); +#437997 = EDGE_CURVE('',#437990,#437929,#437998,.T.); +#437998 = LINE('',#437999,#438000); +#437999 = CARTESIAN_POINT('',(148.116932,-117.113817,1.585)); +#438000 = VECTOR('',#438001,1.); +#438001 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#438002 = PLANE('',#438003); +#438003 = AXIS2_PLACEMENT_3D('',#438004,#438005,#438006); +#438004 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438005 = DIRECTION('',(0.,0.,1.)); +#438006 = DIRECTION('',(1.,0.,-0.)); +#438007 = SHELL_BASED_SURFACE_MODEL('',(#438008)); +#438008 = OPEN_SHELL('',(#438009)); +#438009 = ADVANCED_FACE('',(#438010),#438168,.T.); +#438010 = FACE_BOUND('',#438011,.F.); +#438011 = EDGE_LOOP('',(#438012,#438023,#438031,#438039,#438047,#438055, + #438064,#438072,#438081,#438089,#438097,#438105,#438113,#438121, + #438129,#438137,#438146,#438154,#438162)); +#438012 = ORIENTED_EDGE('',*,*,#438013,.T.); +#438013 = EDGE_CURVE('',#438014,#438016,#438018,.T.); +#438014 = VERTEX_POINT('',#438015); +#438015 = CARTESIAN_POINT('',(148.613094,-116.911792,1.585)); +#438016 = VERTEX_POINT('',#438017); +#438017 = CARTESIAN_POINT('',(148.715831,-116.931193,1.585)); +#438018 = CIRCLE('',#438019,7.44076017233E-02); +#438019 = AXIS2_PLACEMENT_3D('',#438020,#438021,#438022); +#438020 = CARTESIAN_POINT('',(148.65463706572,-116.973522583,1.585)); +#438021 = DIRECTION('',(0.,0.,-1.)); +#438022 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#438023 = ORIENTED_EDGE('',*,*,#438024,.T.); +#438024 = EDGE_CURVE('',#438016,#438025,#438027,.T.); +#438025 = VERTEX_POINT('',#438026); +#438026 = CARTESIAN_POINT('',(148.782987,-116.900593,1.585)); +#438027 = LINE('',#438028,#438029); +#438028 = CARTESIAN_POINT('',(148.715831,-116.931193,1.585)); +#438029 = VECTOR('',#438030,1.); +#438030 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#438031 = ORIENTED_EDGE('',*,*,#438032,.T.); +#438032 = EDGE_CURVE('',#438025,#438033,#438035,.T.); +#438033 = VERTEX_POINT('',#438034); +#438034 = CARTESIAN_POINT('',(148.955108,-116.900593,1.585)); +#438035 = LINE('',#438036,#438037); +#438036 = CARTESIAN_POINT('',(148.782987,-116.900593,1.585)); +#438037 = VECTOR('',#438038,1.); +#438038 = DIRECTION('',(1.,0.,0.)); +#438039 = ORIENTED_EDGE('',*,*,#438040,.T.); +#438040 = EDGE_CURVE('',#438033,#438041,#438043,.T.); +#438041 = VERTEX_POINT('',#438042); +#438042 = CARTESIAN_POINT('',(149.081698,-116.962521,1.585)); +#438043 = LINE('',#438044,#438045); +#438044 = CARTESIAN_POINT('',(148.955108,-116.900593,1.585)); +#438045 = VECTOR('',#438046,1.); +#438046 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#438047 = ORIENTED_EDGE('',*,*,#438048,.T.); +#438048 = EDGE_CURVE('',#438041,#438049,#438051,.T.); +#438049 = VERTEX_POINT('',#438050); +#438050 = CARTESIAN_POINT('',(149.102796,-116.98823,1.585)); +#438051 = LINE('',#438052,#438053); +#438052 = CARTESIAN_POINT('',(149.081698,-116.962521,1.585)); +#438053 = VECTOR('',#438054,1.); +#438054 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#438055 = ORIENTED_EDGE('',*,*,#438056,.T.); +#438056 = EDGE_CURVE('',#438049,#438057,#438059,.T.); +#438057 = VERTEX_POINT('',#438058); +#438058 = CARTESIAN_POINT('',(149.145693,-117.682487,1.585)); +#438059 = CIRCLE('',#438060,0.780466291445); +#438060 = AXIS2_PLACEMENT_3D('',#438061,#438062,#438063); +#438061 = CARTESIAN_POINT('',(148.4268832213,-117.3784473082,1.585)); +#438062 = DIRECTION('',(0.,0.,-1.)); +#438063 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#438064 = ORIENTED_EDGE('',*,*,#438065,.T.); +#438065 = EDGE_CURVE('',#438057,#438066,#438068,.T.); +#438066 = VERTEX_POINT('',#438067); +#438067 = CARTESIAN_POINT('',(149.125001,-117.703179,1.585)); +#438068 = LINE('',#438069,#438070); +#438069 = CARTESIAN_POINT('',(149.145693,-117.682487,1.585)); +#438070 = VECTOR('',#438071,1.); +#438071 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#438072 = ORIENTED_EDGE('',*,*,#438073,.T.); +#438073 = EDGE_CURVE('',#438066,#438074,#438076,.T.); +#438074 = VERTEX_POINT('',#438075); +#438075 = CARTESIAN_POINT('',(149.008333,-117.640819,1.585)); +#438076 = CIRCLE('',#438077,7.499979580333E-02); +#438077 = AXIS2_PLACEMENT_3D('',#438078,#438079,#438080); +#438078 = CARTESIAN_POINT('',(149.0833327958,-117.6408193164,1.585)); +#438079 = DIRECTION('',(-0.,0.,-1.)); +#438080 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#438081 = ORIENTED_EDGE('',*,*,#438082,.T.); +#438082 = EDGE_CURVE('',#438074,#438083,#438085,.T.); +#438083 = VERTEX_POINT('',#438084); +#438084 = CARTESIAN_POINT('',(149.008333,-117.134714,1.585)); +#438085 = LINE('',#438086,#438087); +#438086 = CARTESIAN_POINT('',(149.008333,-117.640819,1.585)); +#438087 = VECTOR('',#438088,1.); +#438088 = DIRECTION('',(0.,1.,0.)); +#438089 = ORIENTED_EDGE('',*,*,#438090,.T.); +#438090 = EDGE_CURVE('',#438083,#438091,#438093,.T.); +#438091 = VERTEX_POINT('',#438092); +#438092 = CARTESIAN_POINT('',(148.979812,-117.077672,1.585)); +#438093 = LINE('',#438094,#438095); +#438094 = CARTESIAN_POINT('',(149.008333,-117.134714,1.585)); +#438095 = VECTOR('',#438096,1.); +#438096 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#438097 = ORIENTED_EDGE('',*,*,#438098,.T.); +#438098 = EDGE_CURVE('',#438091,#438099,#438101,.T.); +#438099 = VERTEX_POINT('',#438100); +#438100 = CARTESIAN_POINT('',(148.922771,-117.049152,1.585)); +#438101 = LINE('',#438102,#438103); +#438102 = CARTESIAN_POINT('',(148.979812,-117.077672,1.585)); +#438103 = VECTOR('',#438104,1.); +#438104 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#438105 = ORIENTED_EDGE('',*,*,#438106,.T.); +#438106 = EDGE_CURVE('',#438099,#438107,#438109,.T.); +#438107 = VERTEX_POINT('',#438108); +#438108 = CARTESIAN_POINT('',(148.815324,-117.049152,1.585)); +#438109 = LINE('',#438110,#438111); +#438110 = CARTESIAN_POINT('',(148.922771,-117.049152,1.585)); +#438111 = VECTOR('',#438112,1.); +#438112 = DIRECTION('',(-1.,0.,0.)); +#438113 = ORIENTED_EDGE('',*,*,#438114,.T.); +#438114 = EDGE_CURVE('',#438107,#438115,#438117,.T.); +#438115 = VERTEX_POINT('',#438116); +#438116 = CARTESIAN_POINT('',(148.746808,-117.08341,1.585)); +#438117 = LINE('',#438118,#438119); +#438118 = CARTESIAN_POINT('',(148.815324,-117.049152,1.585)); +#438119 = VECTOR('',#438120,1.); +#438120 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#438121 = ORIENTED_EDGE('',*,*,#438122,.T.); +#438122 = EDGE_CURVE('',#438115,#438123,#438125,.T.); +#438123 = VERTEX_POINT('',#438124); +#438124 = CARTESIAN_POINT('',(148.729762,-117.100456,1.585)); +#438125 = LINE('',#438126,#438127); +#438126 = CARTESIAN_POINT('',(148.746808,-117.08341,1.585)); +#438127 = VECTOR('',#438128,1.); +#438128 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#438129 = ORIENTED_EDGE('',*,*,#438130,.T.); +#438130 = EDGE_CURVE('',#438123,#438131,#438133,.T.); +#438131 = VERTEX_POINT('',#438132); +#438132 = CARTESIAN_POINT('',(148.728321,-117.655451,1.585)); +#438133 = LINE('',#438134,#438135); +#438134 = CARTESIAN_POINT('',(148.729762,-117.100456,1.585)); +#438135 = VECTOR('',#438136,1.); +#438136 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#438137 = ORIENTED_EDGE('',*,*,#438138,.T.); +#438138 = EDGE_CURVE('',#438131,#438139,#438141,.T.); +#438139 = VERTEX_POINT('',#438140); +#438140 = CARTESIAN_POINT('',(148.579762,-117.640819,1.585)); +#438141 = CIRCLE('',#438142,7.500006711465E-02); +#438142 = AXIS2_PLACEMENT_3D('',#438143,#438144,#438145); +#438143 = CARTESIAN_POINT('',(148.65476206711,-117.6408190671,1.585)); +#438144 = DIRECTION('',(-0.,0.,-1.)); +#438145 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#438146 = ORIENTED_EDGE('',*,*,#438147,.T.); +#438147 = EDGE_CURVE('',#438139,#438148,#438150,.T.); +#438148 = VERTEX_POINT('',#438149); +#438149 = CARTESIAN_POINT('',(148.581203,-116.95952,1.585)); +#438150 = LINE('',#438151,#438152); +#438151 = CARTESIAN_POINT('',(148.579762,-117.640819,1.585)); +#438152 = VECTOR('',#438153,1.); +#438153 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#438154 = ORIENTED_EDGE('',*,*,#438155,.T.); +#438155 = EDGE_CURVE('',#438148,#438156,#438158,.T.); +#438156 = VERTEX_POINT('',#438157); +#438157 = CARTESIAN_POINT('',(148.592402,-116.932484,1.585)); +#438158 = LINE('',#438159,#438160); +#438159 = CARTESIAN_POINT('',(148.581203,-116.95952,1.585)); +#438160 = VECTOR('',#438161,1.); +#438161 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#438162 = ORIENTED_EDGE('',*,*,#438163,.T.); +#438163 = EDGE_CURVE('',#438156,#438014,#438164,.T.); +#438164 = LINE('',#438165,#438166); +#438165 = CARTESIAN_POINT('',(148.592402,-116.932484,1.585)); +#438166 = VECTOR('',#438167,1.); +#438167 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#438168 = PLANE('',#438169); +#438169 = AXIS2_PLACEMENT_3D('',#438170,#438171,#438172); +#438170 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438171 = DIRECTION('',(0.,0.,1.)); +#438172 = DIRECTION('',(1.,0.,-0.)); +#438173 = SHELL_BASED_SURFACE_MODEL('',(#438174)); +#438174 = OPEN_SHELL('',(#438175)); +#438175 = ADVANCED_FACE('',(#438176,#438319),#438389,.T.); +#438176 = FACE_BOUND('',#438177,.F.); +#438177 = EDGE_LOOP('',(#438178,#438189,#438197,#438205,#438214,#438222, + #438230,#438238,#438246,#438254,#438262,#438270,#438279,#438287, + #438296,#438304,#438313)); +#438178 = ORIENTED_EDGE('',*,*,#438179,.T.); +#438179 = EDGE_CURVE('',#438180,#438182,#438184,.T.); +#438180 = VERTEX_POINT('',#438181); +#438181 = CARTESIAN_POINT('',(150.201049,-117.0512,1.585)); +#438182 = VERTEX_POINT('',#438183); +#438183 = CARTESIAN_POINT('',(150.430745,-116.621356,1.585)); +#438184 = CIRCLE('',#438185,0.610092147705); +#438185 = AXIS2_PLACEMENT_3D('',#438186,#438187,#438188); +#438186 = CARTESIAN_POINT('',(150.80919574024,-117.0998823481,1.585)); +#438187 = DIRECTION('',(0.,0.,-1.)); +#438188 = DIRECTION('',(-0.99681128913,7.979507417356E-02,0.)); +#438189 = ORIENTED_EDGE('',*,*,#438190,.T.); +#438190 = EDGE_CURVE('',#438182,#438191,#438193,.T.); +#438191 = VERTEX_POINT('',#438192); +#438192 = CARTESIAN_POINT('',(150.544892,-116.56726,1.585)); +#438193 = LINE('',#438194,#438195); +#438194 = CARTESIAN_POINT('',(150.430745,-116.621356,1.585)); +#438195 = VECTOR('',#438196,1.); +#438196 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#438197 = ORIENTED_EDGE('',*,*,#438198,.T.); +#438198 = EDGE_CURVE('',#438191,#438199,#438201,.T.); +#438199 = VERTEX_POINT('',#438200); +#438200 = CARTESIAN_POINT('',(150.764632,-116.56726,1.585)); +#438201 = LINE('',#438202,#438203); +#438202 = CARTESIAN_POINT('',(150.544892,-116.56726,1.585)); +#438203 = VECTOR('',#438204,1.); +#438204 = DIRECTION('',(1.,0.,0.)); +#438205 = ORIENTED_EDGE('',*,*,#438206,.T.); +#438206 = EDGE_CURVE('',#438199,#438207,#438209,.T.); +#438207 = VERTEX_POINT('',#438208); +#438208 = CARTESIAN_POINT('',(150.75,-116.715819,1.585)); +#438209 = CIRCLE('',#438210,7.500006711464E-02); +#438210 = AXIS2_PLACEMENT_3D('',#438211,#438212,#438213); +#438211 = CARTESIAN_POINT('',(150.75000006711,-116.6408189328,1.585)); +#438212 = DIRECTION('',(0.,0.,-1.)); +#438213 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#438214 = ORIENTED_EDGE('',*,*,#438215,.T.); +#438215 = EDGE_CURVE('',#438207,#438216,#438218,.T.); +#438216 = VERTEX_POINT('',#438217); +#438217 = CARTESIAN_POINT('',(150.577229,-116.715819,1.585)); +#438218 = LINE('',#438219,#438220); +#438219 = CARTESIAN_POINT('',(150.75,-116.715819,1.585)); +#438220 = VECTOR('',#438221,1.); +#438221 = DIRECTION('',(-1.,0.,0.)); +#438222 = ORIENTED_EDGE('',*,*,#438223,.T.); +#438223 = EDGE_CURVE('',#438216,#438224,#438226,.T.); +#438224 = VERTEX_POINT('',#438225); +#438225 = CARTESIAN_POINT('',(150.508713,-116.750077,1.585)); +#438226 = LINE('',#438227,#438228); +#438227 = CARTESIAN_POINT('',(150.577229,-116.715819,1.585)); +#438228 = VECTOR('',#438229,1.); +#438229 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#438230 = ORIENTED_EDGE('',*,*,#438231,.T.); +#438231 = EDGE_CURVE('',#438224,#438232,#438234,.T.); +#438232 = VERTEX_POINT('',#438233); +#438233 = CARTESIAN_POINT('',(150.474951,-116.783838,1.585)); +#438234 = LINE('',#438235,#438236); +#438235 = CARTESIAN_POINT('',(150.508713,-116.750077,1.585)); +#438236 = VECTOR('',#438237,1.); +#438237 = DIRECTION('',(-0.707117253197,-0.707096309021,0.)); +#438238 = ORIENTED_EDGE('',*,*,#438239,.T.); +#438239 = EDGE_CURVE('',#438232,#438240,#438242,.T.); +#438240 = VERTEX_POINT('',#438241); +#438241 = CARTESIAN_POINT('',(150.391039,-116.909707,1.585)); +#438242 = LINE('',#438243,#438244); +#438243 = CARTESIAN_POINT('',(150.474951,-116.783838,1.585)); +#438244 = VECTOR('',#438245,1.); +#438245 = DIRECTION('',(-0.554697145239,-0.832052328321,0.)); +#438246 = ORIENTED_EDGE('',*,*,#438247,.T.); +#438247 = EDGE_CURVE('',#438240,#438248,#438250,.T.); +#438248 = VERTEX_POINT('',#438249); +#438249 = CARTESIAN_POINT('',(150.372515,-116.983804,1.585)); +#438250 = LINE('',#438251,#438252); +#438251 = CARTESIAN_POINT('',(150.391039,-116.909707,1.585)); +#438252 = VECTOR('',#438253,1.); +#438253 = DIRECTION('',(-0.242532544357,-0.97014327031,0.)); +#438254 = ORIENTED_EDGE('',*,*,#438255,.T.); +#438255 = EDGE_CURVE('',#438248,#438256,#438258,.T.); +#438256 = VERTEX_POINT('',#438257); +#438257 = CARTESIAN_POINT('',(150.449654,-116.948212,1.585)); +#438258 = LINE('',#438259,#438260); +#438259 = CARTESIAN_POINT('',(150.372515,-116.983804,1.585)); +#438260 = VECTOR('',#438261,1.); +#438261 = DIRECTION('',(0.90800692221,0.418955163734,0.)); +#438262 = ORIENTED_EDGE('',*,*,#438263,.T.); +#438263 = EDGE_CURVE('',#438256,#438264,#438266,.T.); +#438264 = VERTEX_POINT('',#438265); +#438265 = CARTESIAN_POINT('',(150.674571,-116.949434,1.585)); +#438266 = LINE('',#438267,#438268); +#438267 = CARTESIAN_POINT('',(150.449654,-116.948212,1.585)); +#438268 = VECTOR('',#438269,1.); +#438269 = DIRECTION('',(0.999985240956,-5.433035139391E-03,0.)); +#438270 = ORIENTED_EDGE('',*,*,#438271,.T.); +#438271 = EDGE_CURVE('',#438264,#438272,#438274,.T.); +#438272 = VERTEX_POINT('',#438273); +#438273 = CARTESIAN_POINT('',(150.918797,-117.197615,1.585)); +#438274 = CIRCLE('',#438275,0.348625649748); +#438275 = AXIS2_PLACEMENT_3D('',#438276,#438277,#438278); +#438276 = CARTESIAN_POINT('',(150.58139904586,-117.2853786838,1.585)); +#438277 = DIRECTION('',(0.,0.,-1.)); +#438278 = DIRECTION('',(0.267255017531,0.96362583797,0.)); +#438279 = ORIENTED_EDGE('',*,*,#438280,.T.); +#438280 = EDGE_CURVE('',#438272,#438281,#438283,.T.); +#438281 = VERTEX_POINT('',#438282); +#438282 = CARTESIAN_POINT('',(150.917575,-117.470152,1.585)); +#438283 = LINE('',#438284,#438285); +#438284 = CARTESIAN_POINT('',(150.918797,-117.197615,1.585)); +#438285 = VECTOR('',#438286,1.); +#438286 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#438287 = ORIENTED_EDGE('',*,*,#438288,.T.); +#438288 = EDGE_CURVE('',#438281,#438289,#438291,.T.); +#438289 = VERTEX_POINT('',#438290); +#438290 = CARTESIAN_POINT('',(150.669394,-117.714378,1.585)); +#438291 = CIRCLE('',#438292,0.348635327447); +#438292 = AXIS2_PLACEMENT_3D('',#438293,#438294,#438295); +#438293 = CARTESIAN_POINT('',(150.58162248129,-117.3769720841,1.585)); +#438294 = DIRECTION('',(0.,0.,-1.)); +#438295 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#438296 = ORIENTED_EDGE('',*,*,#438297,.T.); +#438297 = EDGE_CURVE('',#438289,#438298,#438300,.T.); +#438298 = VERTEX_POINT('',#438299); +#438299 = CARTESIAN_POINT('',(150.444476,-117.713156,1.585)); +#438300 = LINE('',#438301,#438302); +#438301 = CARTESIAN_POINT('',(150.669394,-117.714378,1.585)); +#438302 = VECTOR('',#438303,1.); +#438303 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#438304 = ORIENTED_EDGE('',*,*,#438305,.T.); +#438305 = EDGE_CURVE('',#438298,#438306,#438308,.T.); +#438306 = VERTEX_POINT('',#438307); +#438307 = CARTESIAN_POINT('',(150.200251,-117.464974,1.585)); +#438308 = CIRCLE('',#438309,0.348628446662); +#438309 = AXIS2_PLACEMENT_3D('',#438310,#438311,#438312); +#438310 = CARTESIAN_POINT('',(150.53765161322,-117.3772094284,1.585)); +#438311 = DIRECTION('',(0.,0.,-1.)); +#438312 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#438313 = ORIENTED_EDGE('',*,*,#438314,.T.); +#438314 = EDGE_CURVE('',#438306,#438180,#438315,.T.); +#438315 = LINE('',#438316,#438317); +#438316 = CARTESIAN_POINT('',(150.200251,-117.464974,1.585)); +#438317 = VECTOR('',#438318,1.); +#438318 = DIRECTION('',(1.928585449894E-03,0.999998140277,0.)); +#438319 = FACE_BOUND('',#438320,.F.); +#438320 = EDGE_LOOP('',(#438321,#438332,#438340,#438349,#438357,#438366, + #438374,#438383)); +#438321 = ORIENTED_EDGE('',*,*,#438322,.T.); +#438322 = EDGE_CURVE('',#438323,#438325,#438327,.T.); +#438323 = VERTEX_POINT('',#438324); +#438324 = CARTESIAN_POINT('',(150.705573,-117.131029,1.585)); +#438325 = VERTEX_POINT('',#438326); +#438326 = CARTESIAN_POINT('',(150.413475,-117.131029,1.585)); +#438327 = CIRCLE('',#438328,0.252889603602); +#438328 = AXIS2_PLACEMENT_3D('',#438329,#438330,#438331); +#438329 = CARTESIAN_POINT('',(150.559524,-117.337482,1.585)); +#438330 = DIRECTION('',(0.,0.,1.)); +#438331 = DIRECTION('',(0.577520775547,0.816375988018,-0.)); +#438332 = ORIENTED_EDGE('',*,*,#438333,.T.); +#438333 = EDGE_CURVE('',#438325,#438334,#438336,.T.); +#438334 = VERTEX_POINT('',#438335); +#438335 = CARTESIAN_POINT('',(150.383068,-117.161436,1.585)); +#438336 = LINE('',#438337,#438338); +#438337 = CARTESIAN_POINT('',(150.413475,-117.131029,1.585)); +#438338 = VECTOR('',#438339,1.); +#438339 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#438340 = ORIENTED_EDGE('',*,*,#438341,.T.); +#438341 = EDGE_CURVE('',#438334,#438342,#438344,.T.); +#438342 = VERTEX_POINT('',#438343); +#438343 = CARTESIAN_POINT('',(150.383068,-117.501153,1.585)); +#438344 = CIRCLE('',#438345,0.305621483548); +#438345 = AXIS2_PLACEMENT_3D('',#438346,#438347,#438348); +#438346 = CARTESIAN_POINT('',(150.63714,-117.3312945,1.585)); +#438347 = DIRECTION('',(0.,0.,1.)); +#438348 = DIRECTION('',(-0.831328992485,0.555780627815,0.)); +#438349 = ORIENTED_EDGE('',*,*,#438350,.T.); +#438350 = EDGE_CURVE('',#438342,#438351,#438353,.T.); +#438351 = VERTEX_POINT('',#438352); +#438352 = CARTESIAN_POINT('',(150.413475,-117.531561,1.585)); +#438353 = LINE('',#438354,#438355); +#438354 = CARTESIAN_POINT('',(150.383068,-117.501153,1.585)); +#438355 = VECTOR('',#438356,1.); +#438356 = DIRECTION('',(0.707095153914,-0.707118408268,0.)); +#438357 = ORIENTED_EDGE('',*,*,#438358,.T.); +#438358 = EDGE_CURVE('',#438351,#438359,#438361,.T.); +#438359 = VERTEX_POINT('',#438360); +#438360 = CARTESIAN_POINT('',(150.705572,-117.531561,1.585)); +#438361 = CIRCLE('',#438362,0.252888498466); +#438362 = AXIS2_PLACEMENT_3D('',#438363,#438364,#438365); +#438363 = CARTESIAN_POINT('',(150.5595235,-117.325109,1.585)); +#438364 = DIRECTION('',(0.,0.,1.)); +#438365 = DIRECTION('',(-0.577521322188,-0.816375601312,0.)); +#438366 = ORIENTED_EDGE('',*,*,#438367,.T.); +#438367 = EDGE_CURVE('',#438359,#438368,#438370,.T.); +#438368 = VERTEX_POINT('',#438369); +#438369 = CARTESIAN_POINT('',(150.735979,-117.501153,1.585)); +#438370 = LINE('',#438371,#438372); +#438371 = CARTESIAN_POINT('',(150.705572,-117.531561,1.585)); +#438372 = VECTOR('',#438373,1.); +#438373 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#438374 = ORIENTED_EDGE('',*,*,#438375,.T.); +#438375 = EDGE_CURVE('',#438368,#438376,#438378,.T.); +#438376 = VERTEX_POINT('',#438377); +#438377 = CARTESIAN_POINT('',(150.73598,-117.161436,1.585)); +#438378 = CIRCLE('',#438379,0.305616146029); +#438379 = AXIS2_PLACEMENT_3D('',#438380,#438381,#438382); +#438380 = CARTESIAN_POINT('',(150.48191392049,-117.3312937521,1.585)); +#438381 = DIRECTION('',(0.,-0.,1.)); +#438382 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#438383 = ORIENTED_EDGE('',*,*,#438384,.T.); +#438384 = EDGE_CURVE('',#438376,#438323,#438385,.T.); +#438385 = LINE('',#438386,#438387); +#438386 = CARTESIAN_POINT('',(150.73598,-117.161436,1.585)); +#438387 = VECTOR('',#438388,1.); +#438388 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#438389 = PLANE('',#438390); +#438390 = AXIS2_PLACEMENT_3D('',#438391,#438392,#438393); +#438391 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438392 = DIRECTION('',(0.,0.,1.)); +#438393 = DIRECTION('',(1.,0.,-0.)); +#438394 = SHELL_BASED_SURFACE_MODEL('',(#438395)); +#438395 = OPEN_SHELL('',(#438396)); +#438396 = ADVANCED_FACE('',(#438397),#438569,.T.); +#438397 = FACE_BOUND('',#438398,.F.); +#438398 = EDGE_LOOP('',(#438399,#438410,#438418,#438426,#438434,#438442, + #438450,#438459,#438467,#438475,#438483,#438491,#438499,#438507, + #438515,#438523,#438531,#438539,#438547,#438555,#438563)); +#438399 = ORIENTED_EDGE('',*,*,#438400,.T.); +#438400 = EDGE_CURVE('',#438401,#438403,#438405,.T.); +#438401 = VERTEX_POINT('',#438402); +#438402 = CARTESIAN_POINT('',(124.044567,-113.777039,1.585)); +#438403 = VERTEX_POINT('',#438404); +#438404 = CARTESIAN_POINT('',(124.16,-113.8,1.585)); +#438405 = CIRCLE('',#438406,6.000007318647E-02); +#438406 = AXIS2_PLACEMENT_3D('',#438407,#438408,#438409); +#438407 = CARTESIAN_POINT('',(124.09999992681,-113.7999998233,1.585)); +#438408 = DIRECTION('',(0.,0.,-1.)); +#438409 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#438410 = ORIENTED_EDGE('',*,*,#438411,.T.); +#438411 = EDGE_CURVE('',#438403,#438412,#438414,.T.); +#438412 = VERTEX_POINT('',#438413); +#438413 = CARTESIAN_POINT('',(124.16,-114.475147,1.585)); +#438414 = LINE('',#438415,#438416); +#438415 = CARTESIAN_POINT('',(124.16,-113.8,1.585)); +#438416 = VECTOR('',#438417,1.); +#438417 = DIRECTION('',(0.,-1.,0.)); +#438418 = ORIENTED_EDGE('',*,*,#438419,.T.); +#438419 = EDGE_CURVE('',#438412,#438420,#438422,.T.); +#438420 = VERTEX_POINT('',#438421); +#438421 = CARTESIAN_POINT('',(125.274853,-115.59,1.585)); +#438422 = LINE('',#438423,#438424); +#438423 = CARTESIAN_POINT('',(124.16,-114.475147,1.585)); +#438424 = VECTOR('',#438425,1.); +#438425 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#438426 = ORIENTED_EDGE('',*,*,#438427,.T.); +#438427 = EDGE_CURVE('',#438420,#438428,#438430,.T.); +#438428 = VERTEX_POINT('',#438429); +#438429 = CARTESIAN_POINT('',(129.225148,-115.59,1.585)); +#438430 = LINE('',#438431,#438432); +#438431 = CARTESIAN_POINT('',(125.274853,-115.59,1.585)); +#438432 = VECTOR('',#438433,1.); +#438433 = DIRECTION('',(1.,0.,0.)); +#438434 = ORIENTED_EDGE('',*,*,#438435,.T.); +#438435 = EDGE_CURVE('',#438428,#438436,#438438,.T.); +#438436 = VERTEX_POINT('',#438437); +#438437 = CARTESIAN_POINT('',(130.34,-114.475147,1.585)); +#438438 = LINE('',#438439,#438440); +#438439 = CARTESIAN_POINT('',(129.225148,-115.59,1.585)); +#438440 = VECTOR('',#438441,1.); +#438441 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#438442 = ORIENTED_EDGE('',*,*,#438443,.T.); +#438443 = EDGE_CURVE('',#438436,#438444,#438446,.T.); +#438444 = VERTEX_POINT('',#438445); +#438445 = CARTESIAN_POINT('',(130.34,-113.8,1.585)); +#438446 = LINE('',#438447,#438448); +#438447 = CARTESIAN_POINT('',(130.34,-114.475147,1.585)); +#438448 = VECTOR('',#438449,1.); +#438449 = DIRECTION('',(0.,1.,0.)); +#438450 = ORIENTED_EDGE('',*,*,#438451,.T.); +#438451 = EDGE_CURVE('',#438444,#438452,#438454,.T.); +#438452 = VERTEX_POINT('',#438453); +#438453 = CARTESIAN_POINT('',(130.46,-113.8,1.585)); +#438454 = CIRCLE('',#438455,6.000000000043E-02); +#438455 = AXIS2_PLACEMENT_3D('',#438456,#438457,#438458); +#438456 = CARTESIAN_POINT('',(130.4,-113.7999997744,1.585)); +#438457 = DIRECTION('',(0.,0.,-1.)); +#438458 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#438459 = ORIENTED_EDGE('',*,*,#438460,.T.); +#438460 = EDGE_CURVE('',#438452,#438461,#438463,.T.); +#438461 = VERTEX_POINT('',#438462); +#438462 = CARTESIAN_POINT('',(130.46,-114.5,1.585)); +#438463 = LINE('',#438464,#438465); +#438464 = CARTESIAN_POINT('',(130.46,-113.8,1.585)); +#438465 = VECTOR('',#438466,1.); +#438466 = DIRECTION('',(0.,-1.,0.)); +#438467 = ORIENTED_EDGE('',*,*,#438468,.T.); +#438468 = EDGE_CURVE('',#438461,#438469,#438471,.T.); +#438469 = VERTEX_POINT('',#438470); +#438470 = CARTESIAN_POINT('',(130.455433,-114.522961,1.585)); +#438471 = LINE('',#438472,#438473); +#438472 = CARTESIAN_POINT('',(130.46,-114.5,1.585)); +#438473 = VECTOR('',#438474,1.); +#438474 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#438475 = ORIENTED_EDGE('',*,*,#438476,.T.); +#438476 = EDGE_CURVE('',#438469,#438477,#438479,.T.); +#438477 = VERTEX_POINT('',#438478); +#438478 = CARTESIAN_POINT('',(130.442427,-114.542426,1.585)); +#438479 = LINE('',#438480,#438481); +#438480 = CARTESIAN_POINT('',(130.455433,-114.522961,1.585)); +#438481 = VECTOR('',#438482,1.); +#438482 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#438483 = ORIENTED_EDGE('',*,*,#438484,.T.); +#438484 = EDGE_CURVE('',#438477,#438485,#438487,.T.); +#438485 = VERTEX_POINT('',#438486); +#438486 = CARTESIAN_POINT('',(129.292426,-115.692426,1.585)); +#438487 = LINE('',#438488,#438489); +#438488 = CARTESIAN_POINT('',(130.442427,-114.542426,1.585)); +#438489 = VECTOR('',#438490,1.); +#438490 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#438491 = ORIENTED_EDGE('',*,*,#438492,.T.); +#438492 = EDGE_CURVE('',#438485,#438493,#438495,.T.); +#438493 = VERTEX_POINT('',#438494); +#438494 = CARTESIAN_POINT('',(129.272961,-115.705433,1.585)); +#438495 = LINE('',#438496,#438497); +#438496 = CARTESIAN_POINT('',(129.292426,-115.692426,1.585)); +#438497 = VECTOR('',#438498,1.); +#438498 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#438499 = ORIENTED_EDGE('',*,*,#438500,.T.); +#438500 = EDGE_CURVE('',#438493,#438501,#438503,.T.); +#438501 = VERTEX_POINT('',#438502); +#438502 = CARTESIAN_POINT('',(129.25,-115.71,1.585)); +#438503 = LINE('',#438504,#438505); +#438504 = CARTESIAN_POINT('',(129.272961,-115.705433,1.585)); +#438505 = VECTOR('',#438506,1.); +#438506 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#438507 = ORIENTED_EDGE('',*,*,#438508,.T.); +#438508 = EDGE_CURVE('',#438501,#438509,#438511,.T.); +#438509 = VERTEX_POINT('',#438510); +#438510 = CARTESIAN_POINT('',(125.25,-115.71,1.585)); +#438511 = LINE('',#438512,#438513); +#438512 = CARTESIAN_POINT('',(129.25,-115.71,1.585)); +#438513 = VECTOR('',#438514,1.); +#438514 = DIRECTION('',(-1.,0.,0.)); +#438515 = ORIENTED_EDGE('',*,*,#438516,.T.); +#438516 = EDGE_CURVE('',#438509,#438517,#438519,.T.); +#438517 = VERTEX_POINT('',#438518); +#438518 = CARTESIAN_POINT('',(125.227039,-115.705433,1.585)); +#438519 = LINE('',#438520,#438521); +#438520 = CARTESIAN_POINT('',(125.25,-115.71,1.585)); +#438521 = VECTOR('',#438522,1.); +#438522 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#438523 = ORIENTED_EDGE('',*,*,#438524,.T.); +#438524 = EDGE_CURVE('',#438517,#438525,#438527,.T.); +#438525 = VERTEX_POINT('',#438526); +#438526 = CARTESIAN_POINT('',(125.207574,-115.692427,1.585)); +#438527 = LINE('',#438528,#438529); +#438528 = CARTESIAN_POINT('',(125.227039,-115.705433,1.585)); +#438529 = VECTOR('',#438530,1.); +#438530 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#438531 = ORIENTED_EDGE('',*,*,#438532,.T.); +#438532 = EDGE_CURVE('',#438525,#438533,#438535,.T.); +#438533 = VERTEX_POINT('',#438534); +#438534 = CARTESIAN_POINT('',(124.057574,-114.542426,1.585)); +#438535 = LINE('',#438536,#438537); +#438536 = CARTESIAN_POINT('',(125.207574,-115.692427,1.585)); +#438537 = VECTOR('',#438538,1.); +#438538 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#438539 = ORIENTED_EDGE('',*,*,#438540,.T.); +#438540 = EDGE_CURVE('',#438533,#438541,#438543,.T.); +#438541 = VERTEX_POINT('',#438542); +#438542 = CARTESIAN_POINT('',(124.044567,-114.522961,1.585)); +#438543 = LINE('',#438544,#438545); +#438544 = CARTESIAN_POINT('',(124.057574,-114.542426,1.585)); +#438545 = VECTOR('',#438546,1.); +#438546 = DIRECTION('',(-0.555596893535,0.831451797698,0.)); +#438547 = ORIENTED_EDGE('',*,*,#438548,.T.); +#438548 = EDGE_CURVE('',#438541,#438549,#438551,.T.); +#438549 = VERTEX_POINT('',#438550); +#438550 = CARTESIAN_POINT('',(124.04,-114.5,1.585)); +#438551 = LINE('',#438552,#438553); +#438552 = CARTESIAN_POINT('',(124.044567,-114.522961,1.585)); +#438553 = VECTOR('',#438554,1.); +#438554 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#438555 = ORIENTED_EDGE('',*,*,#438556,.T.); +#438556 = EDGE_CURVE('',#438549,#438557,#438559,.T.); +#438557 = VERTEX_POINT('',#438558); +#438558 = CARTESIAN_POINT('',(124.04,-113.8,1.585)); +#438559 = LINE('',#438560,#438561); +#438560 = CARTESIAN_POINT('',(124.04,-114.5,1.585)); +#438561 = VECTOR('',#438562,1.); +#438562 = DIRECTION('',(0.,1.,0.)); +#438563 = ORIENTED_EDGE('',*,*,#438564,.T.); +#438564 = EDGE_CURVE('',#438557,#438401,#438565,.T.); +#438565 = LINE('',#438566,#438567); +#438566 = CARTESIAN_POINT('',(124.04,-113.8,1.585)); +#438567 = VECTOR('',#438568,1.); +#438568 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#438569 = PLANE('',#438570); +#438570 = AXIS2_PLACEMENT_3D('',#438571,#438572,#438573); +#438571 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438572 = DIRECTION('',(0.,0.,1.)); +#438573 = DIRECTION('',(1.,0.,-0.)); +#438574 = SHELL_BASED_SURFACE_MODEL('',(#438575)); +#438575 = OPEN_SHELL('',(#438576)); +#438576 = ADVANCED_FACE('',(#438577),#438749,.T.); +#438577 = FACE_BOUND('',#438578,.F.); +#438578 = EDGE_LOOP('',(#438579,#438590,#438598,#438606,#438614,#438622, + #438630,#438639,#438647,#438655,#438663,#438671,#438679,#438687, + #438695,#438703,#438711,#438719,#438727,#438735,#438743)); +#438579 = ORIENTED_EDGE('',*,*,#438580,.T.); +#438580 = EDGE_CURVE('',#438581,#438583,#438585,.T.); +#438581 = VERTEX_POINT('',#438582); +#438582 = CARTESIAN_POINT('',(134.294567,-113.777039,1.585)); +#438583 = VERTEX_POINT('',#438584); +#438584 = CARTESIAN_POINT('',(134.41,-113.8,1.585)); +#438585 = CIRCLE('',#438586,6.000007318647E-02); +#438586 = AXIS2_PLACEMENT_3D('',#438587,#438588,#438589); +#438587 = CARTESIAN_POINT('',(134.34999992681,-113.7999998233,1.585)); +#438588 = DIRECTION('',(0.,0.,-1.)); +#438589 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#438590 = ORIENTED_EDGE('',*,*,#438591,.T.); +#438591 = EDGE_CURVE('',#438583,#438592,#438594,.T.); +#438592 = VERTEX_POINT('',#438593); +#438593 = CARTESIAN_POINT('',(134.41,-114.475147,1.585)); +#438594 = LINE('',#438595,#438596); +#438595 = CARTESIAN_POINT('',(134.41,-113.8,1.585)); +#438596 = VECTOR('',#438597,1.); +#438597 = DIRECTION('',(0.,-1.,0.)); +#438598 = ORIENTED_EDGE('',*,*,#438599,.T.); +#438599 = EDGE_CURVE('',#438592,#438600,#438602,.T.); +#438600 = VERTEX_POINT('',#438601); +#438601 = CARTESIAN_POINT('',(135.524853,-115.59,1.585)); +#438602 = LINE('',#438603,#438604); +#438603 = CARTESIAN_POINT('',(134.41,-114.475147,1.585)); +#438604 = VECTOR('',#438605,1.); +#438605 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#438606 = ORIENTED_EDGE('',*,*,#438607,.T.); +#438607 = EDGE_CURVE('',#438600,#438608,#438610,.T.); +#438608 = VERTEX_POINT('',#438609); +#438609 = CARTESIAN_POINT('',(139.475148,-115.59,1.585)); +#438610 = LINE('',#438611,#438612); +#438611 = CARTESIAN_POINT('',(135.524853,-115.59,1.585)); +#438612 = VECTOR('',#438613,1.); +#438613 = DIRECTION('',(1.,0.,0.)); +#438614 = ORIENTED_EDGE('',*,*,#438615,.T.); +#438615 = EDGE_CURVE('',#438608,#438616,#438618,.T.); +#438616 = VERTEX_POINT('',#438617); +#438617 = CARTESIAN_POINT('',(140.59,-114.475147,1.585)); +#438618 = LINE('',#438619,#438620); +#438619 = CARTESIAN_POINT('',(139.475148,-115.59,1.585)); +#438620 = VECTOR('',#438621,1.); +#438621 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#438622 = ORIENTED_EDGE('',*,*,#438623,.T.); +#438623 = EDGE_CURVE('',#438616,#438624,#438626,.T.); +#438624 = VERTEX_POINT('',#438625); +#438625 = CARTESIAN_POINT('',(140.59,-113.8,1.585)); +#438626 = LINE('',#438627,#438628); +#438627 = CARTESIAN_POINT('',(140.59,-114.475147,1.585)); +#438628 = VECTOR('',#438629,1.); +#438629 = DIRECTION('',(0.,1.,0.)); +#438630 = ORIENTED_EDGE('',*,*,#438631,.T.); +#438631 = EDGE_CURVE('',#438624,#438632,#438634,.T.); +#438632 = VERTEX_POINT('',#438633); +#438633 = CARTESIAN_POINT('',(140.71,-113.8,1.585)); +#438634 = CIRCLE('',#438635,6.000000000043E-02); +#438635 = AXIS2_PLACEMENT_3D('',#438636,#438637,#438638); +#438636 = CARTESIAN_POINT('',(140.65,-113.7999997744,1.585)); +#438637 = DIRECTION('',(0.,0.,-1.)); +#438638 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#438639 = ORIENTED_EDGE('',*,*,#438640,.T.); +#438640 = EDGE_CURVE('',#438632,#438641,#438643,.T.); +#438641 = VERTEX_POINT('',#438642); +#438642 = CARTESIAN_POINT('',(140.71,-114.5,1.585)); +#438643 = LINE('',#438644,#438645); +#438644 = CARTESIAN_POINT('',(140.71,-113.8,1.585)); +#438645 = VECTOR('',#438646,1.); +#438646 = DIRECTION('',(0.,-1.,0.)); +#438647 = ORIENTED_EDGE('',*,*,#438648,.T.); +#438648 = EDGE_CURVE('',#438641,#438649,#438651,.T.); +#438649 = VERTEX_POINT('',#438650); +#438650 = CARTESIAN_POINT('',(140.705433,-114.522961,1.585)); +#438651 = LINE('',#438652,#438653); +#438652 = CARTESIAN_POINT('',(140.71,-114.5,1.585)); +#438653 = VECTOR('',#438654,1.); +#438654 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#438655 = ORIENTED_EDGE('',*,*,#438656,.T.); +#438656 = EDGE_CURVE('',#438649,#438657,#438659,.T.); +#438657 = VERTEX_POINT('',#438658); +#438658 = CARTESIAN_POINT('',(140.692427,-114.542426,1.585)); +#438659 = LINE('',#438660,#438661); +#438660 = CARTESIAN_POINT('',(140.705433,-114.522961,1.585)); +#438661 = VECTOR('',#438662,1.); +#438662 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#438663 = ORIENTED_EDGE('',*,*,#438664,.T.); +#438664 = EDGE_CURVE('',#438657,#438665,#438667,.T.); +#438665 = VERTEX_POINT('',#438666); +#438666 = CARTESIAN_POINT('',(139.542426,-115.692426,1.585)); +#438667 = LINE('',#438668,#438669); +#438668 = CARTESIAN_POINT('',(140.692427,-114.542426,1.585)); +#438669 = VECTOR('',#438670,1.); +#438670 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#438671 = ORIENTED_EDGE('',*,*,#438672,.T.); +#438672 = EDGE_CURVE('',#438665,#438673,#438675,.T.); +#438673 = VERTEX_POINT('',#438674); +#438674 = CARTESIAN_POINT('',(139.522961,-115.705433,1.585)); +#438675 = LINE('',#438676,#438677); +#438676 = CARTESIAN_POINT('',(139.542426,-115.692426,1.585)); +#438677 = VECTOR('',#438678,1.); +#438678 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#438679 = ORIENTED_EDGE('',*,*,#438680,.T.); +#438680 = EDGE_CURVE('',#438673,#438681,#438683,.T.); +#438681 = VERTEX_POINT('',#438682); +#438682 = CARTESIAN_POINT('',(139.5,-115.71,1.585)); +#438683 = LINE('',#438684,#438685); +#438684 = CARTESIAN_POINT('',(139.522961,-115.705433,1.585)); +#438685 = VECTOR('',#438686,1.); +#438686 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#438687 = ORIENTED_EDGE('',*,*,#438688,.T.); +#438688 = EDGE_CURVE('',#438681,#438689,#438691,.T.); +#438689 = VERTEX_POINT('',#438690); +#438690 = CARTESIAN_POINT('',(135.5,-115.71,1.585)); +#438691 = LINE('',#438692,#438693); +#438692 = CARTESIAN_POINT('',(139.5,-115.71,1.585)); +#438693 = VECTOR('',#438694,1.); +#438694 = DIRECTION('',(-1.,0.,0.)); +#438695 = ORIENTED_EDGE('',*,*,#438696,.T.); +#438696 = EDGE_CURVE('',#438689,#438697,#438699,.T.); +#438697 = VERTEX_POINT('',#438698); +#438698 = CARTESIAN_POINT('',(135.477039,-115.705433,1.585)); +#438699 = LINE('',#438700,#438701); +#438700 = CARTESIAN_POINT('',(135.5,-115.71,1.585)); +#438701 = VECTOR('',#438702,1.); +#438702 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#438703 = ORIENTED_EDGE('',*,*,#438704,.T.); +#438704 = EDGE_CURVE('',#438697,#438705,#438707,.T.); +#438705 = VERTEX_POINT('',#438706); +#438706 = CARTESIAN_POINT('',(135.457574,-115.692427,1.585)); +#438707 = LINE('',#438708,#438709); +#438708 = CARTESIAN_POINT('',(135.477039,-115.705433,1.585)); +#438709 = VECTOR('',#438710,1.); +#438710 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#438711 = ORIENTED_EDGE('',*,*,#438712,.T.); +#438712 = EDGE_CURVE('',#438705,#438713,#438715,.T.); +#438713 = VERTEX_POINT('',#438714); +#438714 = CARTESIAN_POINT('',(134.307574,-114.542426,1.585)); +#438715 = LINE('',#438716,#438717); +#438716 = CARTESIAN_POINT('',(135.457574,-115.692427,1.585)); +#438717 = VECTOR('',#438718,1.); +#438718 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#438719 = ORIENTED_EDGE('',*,*,#438720,.T.); +#438720 = EDGE_CURVE('',#438713,#438721,#438723,.T.); +#438721 = VERTEX_POINT('',#438722); +#438722 = CARTESIAN_POINT('',(134.294567,-114.522961,1.585)); +#438723 = LINE('',#438724,#438725); +#438724 = CARTESIAN_POINT('',(134.307574,-114.542426,1.585)); +#438725 = VECTOR('',#438726,1.); +#438726 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#438727 = ORIENTED_EDGE('',*,*,#438728,.T.); +#438728 = EDGE_CURVE('',#438721,#438729,#438731,.T.); +#438729 = VERTEX_POINT('',#438730); +#438730 = CARTESIAN_POINT('',(134.29,-114.5,1.585)); +#438731 = LINE('',#438732,#438733); +#438732 = CARTESIAN_POINT('',(134.294567,-114.522961,1.585)); +#438733 = VECTOR('',#438734,1.); +#438734 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#438735 = ORIENTED_EDGE('',*,*,#438736,.T.); +#438736 = EDGE_CURVE('',#438729,#438737,#438739,.T.); +#438737 = VERTEX_POINT('',#438738); +#438738 = CARTESIAN_POINT('',(134.29,-113.8,1.585)); +#438739 = LINE('',#438740,#438741); +#438740 = CARTESIAN_POINT('',(134.29,-114.5,1.585)); +#438741 = VECTOR('',#438742,1.); +#438742 = DIRECTION('',(0.,1.,0.)); +#438743 = ORIENTED_EDGE('',*,*,#438744,.T.); +#438744 = EDGE_CURVE('',#438737,#438581,#438745,.T.); +#438745 = LINE('',#438746,#438747); +#438746 = CARTESIAN_POINT('',(134.29,-113.8,1.585)); +#438747 = VECTOR('',#438748,1.); +#438748 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#438749 = PLANE('',#438750); +#438750 = AXIS2_PLACEMENT_3D('',#438751,#438752,#438753); +#438751 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438752 = DIRECTION('',(0.,0.,1.)); +#438753 = DIRECTION('',(1.,0.,-0.)); +#438754 = SHELL_BASED_SURFACE_MODEL('',(#438755)); +#438755 = OPEN_SHELL('',(#438756)); +#438756 = ADVANCED_FACE('',(#438757),#438929,.T.); +#438757 = FACE_BOUND('',#438758,.F.); +#438758 = EDGE_LOOP('',(#438759,#438770,#438778,#438786,#438794,#438802, + #438810,#438819,#438827,#438835,#438843,#438851,#438859,#438867, + #438875,#438883,#438891,#438899,#438907,#438915,#438923)); +#438759 = ORIENTED_EDGE('',*,*,#438760,.T.); +#438760 = EDGE_CURVE('',#438761,#438763,#438765,.T.); +#438761 = VERTEX_POINT('',#438762); +#438762 = CARTESIAN_POINT('',(144.544567,-113.777039,1.585)); +#438763 = VERTEX_POINT('',#438764); +#438764 = CARTESIAN_POINT('',(144.66,-113.8,1.585)); +#438765 = CIRCLE('',#438766,6.000007318647E-02); +#438766 = AXIS2_PLACEMENT_3D('',#438767,#438768,#438769); +#438767 = CARTESIAN_POINT('',(144.59999992681,-113.7999998233,1.585)); +#438768 = DIRECTION('',(0.,0.,-1.)); +#438769 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#438770 = ORIENTED_EDGE('',*,*,#438771,.T.); +#438771 = EDGE_CURVE('',#438763,#438772,#438774,.T.); +#438772 = VERTEX_POINT('',#438773); +#438773 = CARTESIAN_POINT('',(144.66,-114.475147,1.585)); +#438774 = LINE('',#438775,#438776); +#438775 = CARTESIAN_POINT('',(144.66,-113.8,1.585)); +#438776 = VECTOR('',#438777,1.); +#438777 = DIRECTION('',(0.,-1.,0.)); +#438778 = ORIENTED_EDGE('',*,*,#438779,.T.); +#438779 = EDGE_CURVE('',#438772,#438780,#438782,.T.); +#438780 = VERTEX_POINT('',#438781); +#438781 = CARTESIAN_POINT('',(145.774853,-115.59,1.585)); +#438782 = LINE('',#438783,#438784); +#438783 = CARTESIAN_POINT('',(144.66,-114.475147,1.585)); +#438784 = VECTOR('',#438785,1.); +#438785 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#438786 = ORIENTED_EDGE('',*,*,#438787,.T.); +#438787 = EDGE_CURVE('',#438780,#438788,#438790,.T.); +#438788 = VERTEX_POINT('',#438789); +#438789 = CARTESIAN_POINT('',(149.725148,-115.59,1.585)); +#438790 = LINE('',#438791,#438792); +#438791 = CARTESIAN_POINT('',(145.774853,-115.59,1.585)); +#438792 = VECTOR('',#438793,1.); +#438793 = DIRECTION('',(1.,0.,0.)); +#438794 = ORIENTED_EDGE('',*,*,#438795,.T.); +#438795 = EDGE_CURVE('',#438788,#438796,#438798,.T.); +#438796 = VERTEX_POINT('',#438797); +#438797 = CARTESIAN_POINT('',(150.84,-114.475147,1.585)); +#438798 = LINE('',#438799,#438800); +#438799 = CARTESIAN_POINT('',(149.725148,-115.59,1.585)); +#438800 = VECTOR('',#438801,1.); +#438801 = DIRECTION('',(0.707106464056,0.707107098317,0.)); +#438802 = ORIENTED_EDGE('',*,*,#438803,.T.); +#438803 = EDGE_CURVE('',#438796,#438804,#438806,.T.); +#438804 = VERTEX_POINT('',#438805); +#438805 = CARTESIAN_POINT('',(150.84,-113.8,1.585)); +#438806 = LINE('',#438807,#438808); +#438807 = CARTESIAN_POINT('',(150.84,-114.475147,1.585)); +#438808 = VECTOR('',#438809,1.); +#438809 = DIRECTION('',(0.,1.,0.)); +#438810 = ORIENTED_EDGE('',*,*,#438811,.T.); +#438811 = EDGE_CURVE('',#438804,#438812,#438814,.T.); +#438812 = VERTEX_POINT('',#438813); +#438813 = CARTESIAN_POINT('',(150.96,-113.8,1.585)); +#438814 = CIRCLE('',#438815,6.000000000043E-02); +#438815 = AXIS2_PLACEMENT_3D('',#438816,#438817,#438818); +#438816 = CARTESIAN_POINT('',(150.9,-113.7999997744,1.585)); +#438817 = DIRECTION('',(0.,0.,-1.)); +#438818 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#438819 = ORIENTED_EDGE('',*,*,#438820,.T.); +#438820 = EDGE_CURVE('',#438812,#438821,#438823,.T.); +#438821 = VERTEX_POINT('',#438822); +#438822 = CARTESIAN_POINT('',(150.96,-114.5,1.585)); +#438823 = LINE('',#438824,#438825); +#438824 = CARTESIAN_POINT('',(150.96,-113.8,1.585)); +#438825 = VECTOR('',#438826,1.); +#438826 = DIRECTION('',(0.,-1.,0.)); +#438827 = ORIENTED_EDGE('',*,*,#438828,.T.); +#438828 = EDGE_CURVE('',#438821,#438829,#438831,.T.); +#438829 = VERTEX_POINT('',#438830); +#438830 = CARTESIAN_POINT('',(150.955433,-114.522961,1.585)); +#438831 = LINE('',#438832,#438833); +#438832 = CARTESIAN_POINT('',(150.96,-114.5,1.585)); +#438833 = VECTOR('',#438834,1.); +#438834 = DIRECTION('',(-0.195081000118,-0.980787134598,0.)); +#438835 = ORIENTED_EDGE('',*,*,#438836,.T.); +#438836 = EDGE_CURVE('',#438829,#438837,#438839,.T.); +#438837 = VERTEX_POINT('',#438838); +#438838 = CARTESIAN_POINT('',(150.942427,-114.542426,1.585)); +#438839 = LINE('',#438840,#438841); +#438840 = CARTESIAN_POINT('',(150.955433,-114.522961,1.585)); +#438841 = VECTOR('',#438842,1.); +#438842 = DIRECTION('',(-0.555567362933,-0.831471530026,0.)); +#438843 = ORIENTED_EDGE('',*,*,#438844,.T.); +#438844 = EDGE_CURVE('',#438837,#438845,#438847,.T.); +#438845 = VERTEX_POINT('',#438846); +#438846 = CARTESIAN_POINT('',(149.792426,-115.692426,1.585)); +#438847 = LINE('',#438848,#438849); +#438848 = CARTESIAN_POINT('',(150.942427,-114.542426,1.585)); +#438849 = VECTOR('',#438850,1.); +#438850 = DIRECTION('',(-0.707107088624,-0.707106473749,0.)); +#438851 = ORIENTED_EDGE('',*,*,#438852,.T.); +#438852 = EDGE_CURVE('',#438845,#438853,#438855,.T.); +#438853 = VERTEX_POINT('',#438854); +#438854 = CARTESIAN_POINT('',(149.772961,-115.705433,1.585)); +#438855 = LINE('',#438856,#438857); +#438856 = CARTESIAN_POINT('',(149.792426,-115.692426,1.585)); +#438857 = VECTOR('',#438858,1.); +#438858 = DIRECTION('',(-0.831451797698,-0.555596893535,0.)); +#438859 = ORIENTED_EDGE('',*,*,#438860,.T.); +#438860 = EDGE_CURVE('',#438853,#438861,#438863,.T.); +#438861 = VERTEX_POINT('',#438862); +#438862 = CARTESIAN_POINT('',(149.75,-115.71,1.585)); +#438863 = LINE('',#438864,#438865); +#438864 = CARTESIAN_POINT('',(149.772961,-115.705433,1.585)); +#438865 = VECTOR('',#438866,1.); +#438866 = DIRECTION('',(-0.980787134598,-0.195081000118,0.)); +#438867 = ORIENTED_EDGE('',*,*,#438868,.T.); +#438868 = EDGE_CURVE('',#438861,#438869,#438871,.T.); +#438869 = VERTEX_POINT('',#438870); +#438870 = CARTESIAN_POINT('',(145.75,-115.71,1.585)); +#438871 = LINE('',#438872,#438873); +#438872 = CARTESIAN_POINT('',(149.75,-115.71,1.585)); +#438873 = VECTOR('',#438874,1.); +#438874 = DIRECTION('',(-1.,0.,0.)); +#438875 = ORIENTED_EDGE('',*,*,#438876,.T.); +#438876 = EDGE_CURVE('',#438869,#438877,#438879,.T.); +#438877 = VERTEX_POINT('',#438878); +#438878 = CARTESIAN_POINT('',(145.727039,-115.705433,1.585)); +#438879 = LINE('',#438880,#438881); +#438880 = CARTESIAN_POINT('',(145.75,-115.71,1.585)); +#438881 = VECTOR('',#438882,1.); +#438882 = DIRECTION('',(-0.980787134598,0.195081000118,0.)); +#438883 = ORIENTED_EDGE('',*,*,#438884,.T.); +#438884 = EDGE_CURVE('',#438877,#438885,#438887,.T.); +#438885 = VERTEX_POINT('',#438886); +#438886 = CARTESIAN_POINT('',(145.707574,-115.692427,1.585)); +#438887 = LINE('',#438888,#438889); +#438888 = CARTESIAN_POINT('',(145.727039,-115.705433,1.585)); +#438889 = VECTOR('',#438890,1.); +#438890 = DIRECTION('',(-0.831471530025,0.555567362934,0.)); +#438891 = ORIENTED_EDGE('',*,*,#438892,.T.); +#438892 = EDGE_CURVE('',#438885,#438893,#438895,.T.); +#438893 = VERTEX_POINT('',#438894); +#438894 = CARTESIAN_POINT('',(144.557574,-114.542426,1.585)); +#438895 = LINE('',#438896,#438897); +#438896 = CARTESIAN_POINT('',(145.707574,-115.692427,1.585)); +#438897 = VECTOR('',#438898,1.); +#438898 = DIRECTION('',(-0.707106473749,0.707107088624,0.)); +#438899 = ORIENTED_EDGE('',*,*,#438900,.T.); +#438900 = EDGE_CURVE('',#438893,#438901,#438903,.T.); +#438901 = VERTEX_POINT('',#438902); +#438902 = CARTESIAN_POINT('',(144.544567,-114.522961,1.585)); +#438903 = LINE('',#438904,#438905); +#438904 = CARTESIAN_POINT('',(144.557574,-114.542426,1.585)); +#438905 = VECTOR('',#438906,1.); +#438906 = DIRECTION('',(-0.555596893534,0.831451797698,0.)); +#438907 = ORIENTED_EDGE('',*,*,#438908,.T.); +#438908 = EDGE_CURVE('',#438901,#438909,#438911,.T.); +#438909 = VERTEX_POINT('',#438910); +#438910 = CARTESIAN_POINT('',(144.54,-114.5,1.585)); +#438911 = LINE('',#438912,#438913); +#438912 = CARTESIAN_POINT('',(144.544567,-114.522961,1.585)); +#438913 = VECTOR('',#438914,1.); +#438914 = DIRECTION('',(-0.195081000118,0.980787134598,0.)); +#438915 = ORIENTED_EDGE('',*,*,#438916,.T.); +#438916 = EDGE_CURVE('',#438909,#438917,#438919,.T.); +#438917 = VERTEX_POINT('',#438918); +#438918 = CARTESIAN_POINT('',(144.54,-113.8,1.585)); +#438919 = LINE('',#438920,#438921); +#438920 = CARTESIAN_POINT('',(144.54,-114.5,1.585)); +#438921 = VECTOR('',#438922,1.); +#438922 = DIRECTION('',(0.,1.,0.)); +#438923 = ORIENTED_EDGE('',*,*,#438924,.T.); +#438924 = EDGE_CURVE('',#438917,#438761,#438925,.T.); +#438925 = LINE('',#438926,#438927); +#438926 = CARTESIAN_POINT('',(144.54,-113.8,1.585)); +#438927 = VECTOR('',#438928,1.); +#438928 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#438929 = PLANE('',#438930); +#438930 = AXIS2_PLACEMENT_3D('',#438931,#438932,#438933); +#438931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#438932 = DIRECTION('',(0.,0.,1.)); +#438933 = DIRECTION('',(1.,0.,-0.)); +#438934 = SHELL_BASED_SURFACE_MODEL('',(#438935)); +#438935 = OPEN_SHELL('',(#438936)); +#438936 = ADVANCED_FACE('',(#438937),#439101,.T.); +#438937 = FACE_BOUND('',#438938,.F.); +#438938 = EDGE_LOOP('',(#438939,#438949,#438957,#438965,#438973,#438981, + #438989,#438997,#439005,#439014,#439022,#439030,#439038,#439046, + #439054,#439063,#439071,#439079,#439087,#439095)); +#438939 = ORIENTED_EDGE('',*,*,#438940,.T.); +#438940 = EDGE_CURVE('',#438941,#438943,#438945,.T.); +#438941 = VERTEX_POINT('',#438942); +#438942 = CARTESIAN_POINT('',(125.227039,-109.294567,1.585)); +#438943 = VERTEX_POINT('',#438944); +#438944 = CARTESIAN_POINT('',(125.25,-109.29,1.585)); +#438945 = LINE('',#438946,#438947); +#438946 = CARTESIAN_POINT('',(125.227039,-109.294567,1.585)); +#438947 = VECTOR('',#438948,1.); +#438948 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#438949 = ORIENTED_EDGE('',*,*,#438950,.T.); +#438950 = EDGE_CURVE('',#438943,#438951,#438953,.T.); +#438951 = VERTEX_POINT('',#438952); +#438952 = CARTESIAN_POINT('',(129.25,-109.29,1.585)); +#438953 = LINE('',#438954,#438955); +#438954 = CARTESIAN_POINT('',(125.25,-109.29,1.585)); +#438955 = VECTOR('',#438956,1.); +#438956 = DIRECTION('',(1.,0.,0.)); +#438957 = ORIENTED_EDGE('',*,*,#438958,.T.); +#438958 = EDGE_CURVE('',#438951,#438959,#438961,.T.); +#438959 = VERTEX_POINT('',#438960); +#438960 = CARTESIAN_POINT('',(129.272961,-109.294567,1.585)); +#438961 = LINE('',#438962,#438963); +#438962 = CARTESIAN_POINT('',(129.25,-109.29,1.585)); +#438963 = VECTOR('',#438964,1.); +#438964 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#438965 = ORIENTED_EDGE('',*,*,#438966,.T.); +#438966 = EDGE_CURVE('',#438959,#438967,#438969,.T.); +#438967 = VERTEX_POINT('',#438968); +#438968 = CARTESIAN_POINT('',(129.292426,-109.307574,1.585)); +#438969 = LINE('',#438970,#438971); +#438970 = CARTESIAN_POINT('',(129.272961,-109.294567,1.585)); +#438971 = VECTOR('',#438972,1.); +#438972 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#438973 = ORIENTED_EDGE('',*,*,#438974,.T.); +#438974 = EDGE_CURVE('',#438967,#438975,#438977,.T.); +#438975 = VERTEX_POINT('',#438976); +#438976 = CARTESIAN_POINT('',(130.442427,-110.457574,1.585)); +#438977 = LINE('',#438978,#438979); +#438978 = CARTESIAN_POINT('',(129.292426,-109.307574,1.585)); +#438979 = VECTOR('',#438980,1.); +#438980 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#438981 = ORIENTED_EDGE('',*,*,#438982,.T.); +#438982 = EDGE_CURVE('',#438975,#438983,#438985,.T.); +#438983 = VERTEX_POINT('',#438984); +#438984 = CARTESIAN_POINT('',(130.455433,-110.477039,1.585)); +#438985 = LINE('',#438986,#438987); +#438986 = CARTESIAN_POINT('',(130.442427,-110.457574,1.585)); +#438987 = VECTOR('',#438988,1.); +#438988 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#438989 = ORIENTED_EDGE('',*,*,#438990,.T.); +#438990 = EDGE_CURVE('',#438983,#438991,#438993,.T.); +#438991 = VERTEX_POINT('',#438992); +#438992 = CARTESIAN_POINT('',(130.46,-110.5,1.585)); +#438993 = LINE('',#438994,#438995); +#438994 = CARTESIAN_POINT('',(130.455433,-110.477039,1.585)); +#438995 = VECTOR('',#438996,1.); +#438996 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#438997 = ORIENTED_EDGE('',*,*,#438998,.T.); +#438998 = EDGE_CURVE('',#438991,#438999,#439001,.T.); +#438999 = VERTEX_POINT('',#439000); +#439000 = CARTESIAN_POINT('',(130.46,-111.2,1.585)); +#439001 = LINE('',#439002,#439003); +#439002 = CARTESIAN_POINT('',(130.46,-110.5,1.585)); +#439003 = VECTOR('',#439004,1.); +#439004 = DIRECTION('',(0.,-1.,0.)); +#439005 = ORIENTED_EDGE('',*,*,#439006,.T.); +#439006 = EDGE_CURVE('',#438999,#439007,#439009,.T.); +#439007 = VERTEX_POINT('',#439008); +#439008 = CARTESIAN_POINT('',(130.34,-111.2,1.585)); +#439009 = CIRCLE('',#439010,6.000000000042E-02); +#439010 = AXIS2_PLACEMENT_3D('',#439011,#439012,#439013); +#439011 = CARTESIAN_POINT('',(130.4,-111.2000002255,1.585)); +#439012 = DIRECTION('',(0.,0.,-1.)); +#439013 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#439014 = ORIENTED_EDGE('',*,*,#439015,.T.); +#439015 = EDGE_CURVE('',#439007,#439016,#439018,.T.); +#439016 = VERTEX_POINT('',#439017); +#439017 = CARTESIAN_POINT('',(130.34,-110.524852,1.585)); +#439018 = LINE('',#439019,#439020); +#439019 = CARTESIAN_POINT('',(130.34,-111.2,1.585)); +#439020 = VECTOR('',#439021,1.); +#439021 = DIRECTION('',(0.,1.,0.)); +#439022 = ORIENTED_EDGE('',*,*,#439023,.T.); +#439023 = EDGE_CURVE('',#439016,#439024,#439026,.T.); +#439024 = VERTEX_POINT('',#439025); +#439025 = CARTESIAN_POINT('',(129.225148,-109.41,1.585)); +#439026 = LINE('',#439027,#439028); +#439027 = CARTESIAN_POINT('',(130.34,-110.524852,1.585)); +#439028 = VECTOR('',#439029,1.); +#439029 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#439030 = ORIENTED_EDGE('',*,*,#439031,.T.); +#439031 = EDGE_CURVE('',#439024,#439032,#439034,.T.); +#439032 = VERTEX_POINT('',#439033); +#439033 = CARTESIAN_POINT('',(125.275141,-109.41,1.585)); +#439034 = LINE('',#439035,#439036); +#439035 = CARTESIAN_POINT('',(129.225148,-109.41,1.585)); +#439036 = VECTOR('',#439037,1.); +#439037 = DIRECTION('',(-1.,0.,0.)); +#439038 = ORIENTED_EDGE('',*,*,#439039,.T.); +#439039 = EDGE_CURVE('',#439032,#439040,#439042,.T.); +#439040 = VERTEX_POINT('',#439041); +#439041 = CARTESIAN_POINT('',(124.16,-110.543565,1.585)); +#439042 = LINE('',#439043,#439044); +#439043 = CARTESIAN_POINT('',(125.275141,-109.41,1.585)); +#439044 = VECTOR('',#439045,1.); +#439045 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#439046 = ORIENTED_EDGE('',*,*,#439047,.T.); +#439047 = EDGE_CURVE('',#439040,#439048,#439050,.T.); +#439048 = VERTEX_POINT('',#439049); +#439049 = CARTESIAN_POINT('',(124.16,-111.2,1.585)); +#439050 = LINE('',#439051,#439052); +#439051 = CARTESIAN_POINT('',(124.16,-110.543565,1.585)); +#439052 = VECTOR('',#439053,1.); +#439053 = DIRECTION('',(0.,-1.,0.)); +#439054 = ORIENTED_EDGE('',*,*,#439055,.T.); +#439055 = EDGE_CURVE('',#439048,#439056,#439058,.T.); +#439056 = VERTEX_POINT('',#439057); +#439057 = CARTESIAN_POINT('',(124.04,-111.2,1.585)); +#439058 = CIRCLE('',#439059,6.000000000042E-02); +#439059 = AXIS2_PLACEMENT_3D('',#439060,#439061,#439062); +#439060 = CARTESIAN_POINT('',(124.1,-111.2000002255,1.585)); +#439061 = DIRECTION('',(0.,0.,-1.)); +#439062 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#439063 = ORIENTED_EDGE('',*,*,#439064,.T.); +#439064 = EDGE_CURVE('',#439056,#439065,#439067,.T.); +#439065 = VERTEX_POINT('',#439066); +#439066 = CARTESIAN_POINT('',(124.04,-110.519,1.585)); +#439067 = LINE('',#439068,#439069); +#439068 = CARTESIAN_POINT('',(124.04,-111.2,1.585)); +#439069 = VECTOR('',#439070,1.); +#439070 = DIRECTION('',(0.,1.,0.)); +#439071 = ORIENTED_EDGE('',*,*,#439072,.T.); +#439072 = EDGE_CURVE('',#439065,#439073,#439075,.T.); +#439073 = VERTEX_POINT('',#439074); +#439074 = CARTESIAN_POINT('',(124.044894,-110.495711,1.585)); +#439075 = LINE('',#439076,#439077); +#439076 = CARTESIAN_POINT('',(124.04,-110.519,1.585)); +#439077 = VECTOR('',#439078,1.); +#439078 = DIRECTION('',(0.20565044691,0.978625512485,0.)); +#439079 = ORIENTED_EDGE('',*,*,#439080,.T.); +#439080 = EDGE_CURVE('',#439073,#439081,#439083,.T.); +#439081 = VERTEX_POINT('',#439082); +#439082 = CARTESIAN_POINT('',(124.057227,-110.476923,1.585)); +#439083 = LINE('',#439084,#439085); +#439084 = CARTESIAN_POINT('',(124.044894,-110.495711,1.585)); +#439085 = VECTOR('',#439086,1.); +#439086 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#439087 = ORIENTED_EDGE('',*,*,#439088,.T.); +#439088 = EDGE_CURVE('',#439081,#439089,#439091,.T.); +#439089 = VERTEX_POINT('',#439090); +#439090 = CARTESIAN_POINT('',(125.207228,-109.307922,1.585)); +#439091 = LINE('',#439092,#439093); +#439092 = CARTESIAN_POINT('',(124.057227,-110.476923,1.585)); +#439093 = VECTOR('',#439094,1.); +#439094 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#439095 = ORIENTED_EDGE('',*,*,#439096,.T.); +#439096 = EDGE_CURVE('',#439089,#438941,#439097,.T.); +#439097 = LINE('',#439098,#439099); +#439098 = CARTESIAN_POINT('',(125.207228,-109.307922,1.585)); +#439099 = VECTOR('',#439100,1.); +#439100 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#439101 = PLANE('',#439102); +#439102 = AXIS2_PLACEMENT_3D('',#439103,#439104,#439105); +#439103 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439104 = DIRECTION('',(0.,0.,1.)); +#439105 = DIRECTION('',(1.,0.,-0.)); +#439106 = SHELL_BASED_SURFACE_MODEL('',(#439107)); +#439107 = OPEN_SHELL('',(#439108)); +#439108 = ADVANCED_FACE('',(#439109),#439273,.T.); +#439109 = FACE_BOUND('',#439110,.F.); +#439110 = EDGE_LOOP('',(#439111,#439121,#439129,#439137,#439145,#439153, + #439161,#439169,#439177,#439186,#439194,#439202,#439210,#439218, + #439226,#439235,#439243,#439251,#439259,#439267)); +#439111 = ORIENTED_EDGE('',*,*,#439112,.T.); +#439112 = EDGE_CURVE('',#439113,#439115,#439117,.T.); +#439113 = VERTEX_POINT('',#439114); +#439114 = CARTESIAN_POINT('',(135.477039,-109.294567,1.585)); +#439115 = VERTEX_POINT('',#439116); +#439116 = CARTESIAN_POINT('',(135.5,-109.29,1.585)); +#439117 = LINE('',#439118,#439119); +#439118 = CARTESIAN_POINT('',(135.477039,-109.294567,1.585)); +#439119 = VECTOR('',#439120,1.); +#439120 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#439121 = ORIENTED_EDGE('',*,*,#439122,.T.); +#439122 = EDGE_CURVE('',#439115,#439123,#439125,.T.); +#439123 = VERTEX_POINT('',#439124); +#439124 = CARTESIAN_POINT('',(139.5,-109.29,1.585)); +#439125 = LINE('',#439126,#439127); +#439126 = CARTESIAN_POINT('',(135.5,-109.29,1.585)); +#439127 = VECTOR('',#439128,1.); +#439128 = DIRECTION('',(1.,0.,0.)); +#439129 = ORIENTED_EDGE('',*,*,#439130,.T.); +#439130 = EDGE_CURVE('',#439123,#439131,#439133,.T.); +#439131 = VERTEX_POINT('',#439132); +#439132 = CARTESIAN_POINT('',(139.522961,-109.294567,1.585)); +#439133 = LINE('',#439134,#439135); +#439134 = CARTESIAN_POINT('',(139.5,-109.29,1.585)); +#439135 = VECTOR('',#439136,1.); +#439136 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#439137 = ORIENTED_EDGE('',*,*,#439138,.T.); +#439138 = EDGE_CURVE('',#439131,#439139,#439141,.T.); +#439139 = VERTEX_POINT('',#439140); +#439140 = CARTESIAN_POINT('',(139.542426,-109.307574,1.585)); +#439141 = LINE('',#439142,#439143); +#439142 = CARTESIAN_POINT('',(139.522961,-109.294567,1.585)); +#439143 = VECTOR('',#439144,1.); +#439144 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#439145 = ORIENTED_EDGE('',*,*,#439146,.T.); +#439146 = EDGE_CURVE('',#439139,#439147,#439149,.T.); +#439147 = VERTEX_POINT('',#439148); +#439148 = CARTESIAN_POINT('',(140.692427,-110.457574,1.585)); +#439149 = LINE('',#439150,#439151); +#439150 = CARTESIAN_POINT('',(139.542426,-109.307574,1.585)); +#439151 = VECTOR('',#439152,1.); +#439152 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#439153 = ORIENTED_EDGE('',*,*,#439154,.T.); +#439154 = EDGE_CURVE('',#439147,#439155,#439157,.T.); +#439155 = VERTEX_POINT('',#439156); +#439156 = CARTESIAN_POINT('',(140.705433,-110.477039,1.585)); +#439157 = LINE('',#439158,#439159); +#439158 = CARTESIAN_POINT('',(140.692427,-110.457574,1.585)); +#439159 = VECTOR('',#439160,1.); +#439160 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#439161 = ORIENTED_EDGE('',*,*,#439162,.T.); +#439162 = EDGE_CURVE('',#439155,#439163,#439165,.T.); +#439163 = VERTEX_POINT('',#439164); +#439164 = CARTESIAN_POINT('',(140.71,-110.5,1.585)); +#439165 = LINE('',#439166,#439167); +#439166 = CARTESIAN_POINT('',(140.705433,-110.477039,1.585)); +#439167 = VECTOR('',#439168,1.); +#439168 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#439169 = ORIENTED_EDGE('',*,*,#439170,.T.); +#439170 = EDGE_CURVE('',#439163,#439171,#439173,.T.); +#439171 = VERTEX_POINT('',#439172); +#439172 = CARTESIAN_POINT('',(140.71,-111.2,1.585)); +#439173 = LINE('',#439174,#439175); +#439174 = CARTESIAN_POINT('',(140.71,-110.5,1.585)); +#439175 = VECTOR('',#439176,1.); +#439176 = DIRECTION('',(0.,-1.,0.)); +#439177 = ORIENTED_EDGE('',*,*,#439178,.T.); +#439178 = EDGE_CURVE('',#439171,#439179,#439181,.T.); +#439179 = VERTEX_POINT('',#439180); +#439180 = CARTESIAN_POINT('',(140.59,-111.2,1.585)); +#439181 = CIRCLE('',#439182,6.000000000042E-02); +#439182 = AXIS2_PLACEMENT_3D('',#439183,#439184,#439185); +#439183 = CARTESIAN_POINT('',(140.65,-111.2000002255,1.585)); +#439184 = DIRECTION('',(0.,0.,-1.)); +#439185 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#439186 = ORIENTED_EDGE('',*,*,#439187,.T.); +#439187 = EDGE_CURVE('',#439179,#439188,#439190,.T.); +#439188 = VERTEX_POINT('',#439189); +#439189 = CARTESIAN_POINT('',(140.59,-110.524852,1.585)); +#439190 = LINE('',#439191,#439192); +#439191 = CARTESIAN_POINT('',(140.59,-111.2,1.585)); +#439192 = VECTOR('',#439193,1.); +#439193 = DIRECTION('',(0.,1.,0.)); +#439194 = ORIENTED_EDGE('',*,*,#439195,.T.); +#439195 = EDGE_CURVE('',#439188,#439196,#439198,.T.); +#439196 = VERTEX_POINT('',#439197); +#439197 = CARTESIAN_POINT('',(139.475148,-109.41,1.585)); +#439198 = LINE('',#439199,#439200); +#439199 = CARTESIAN_POINT('',(140.59,-110.524852,1.585)); +#439200 = VECTOR('',#439201,1.); +#439201 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#439202 = ORIENTED_EDGE('',*,*,#439203,.T.); +#439203 = EDGE_CURVE('',#439196,#439204,#439206,.T.); +#439204 = VERTEX_POINT('',#439205); +#439205 = CARTESIAN_POINT('',(135.525141,-109.41,1.585)); +#439206 = LINE('',#439207,#439208); +#439207 = CARTESIAN_POINT('',(139.475148,-109.41,1.585)); +#439208 = VECTOR('',#439209,1.); +#439209 = DIRECTION('',(-1.,0.,0.)); +#439210 = ORIENTED_EDGE('',*,*,#439211,.T.); +#439211 = EDGE_CURVE('',#439204,#439212,#439214,.T.); +#439212 = VERTEX_POINT('',#439213); +#439213 = CARTESIAN_POINT('',(134.41,-110.543565,1.585)); +#439214 = LINE('',#439215,#439216); +#439215 = CARTESIAN_POINT('',(135.525141,-109.41,1.585)); +#439216 = VECTOR('',#439217,1.); +#439217 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#439218 = ORIENTED_EDGE('',*,*,#439219,.T.); +#439219 = EDGE_CURVE('',#439212,#439220,#439222,.T.); +#439220 = VERTEX_POINT('',#439221); +#439221 = CARTESIAN_POINT('',(134.41,-111.2,1.585)); +#439222 = LINE('',#439223,#439224); +#439223 = CARTESIAN_POINT('',(134.41,-110.543565,1.585)); +#439224 = VECTOR('',#439225,1.); +#439225 = DIRECTION('',(0.,-1.,0.)); +#439226 = ORIENTED_EDGE('',*,*,#439227,.T.); +#439227 = EDGE_CURVE('',#439220,#439228,#439230,.T.); +#439228 = VERTEX_POINT('',#439229); +#439229 = CARTESIAN_POINT('',(134.29,-111.2,1.585)); +#439230 = CIRCLE('',#439231,6.000000000043E-02); +#439231 = AXIS2_PLACEMENT_3D('',#439232,#439233,#439234); +#439232 = CARTESIAN_POINT('',(134.35,-111.2000002255,1.585)); +#439233 = DIRECTION('',(0.,0.,-1.)); +#439234 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#439235 = ORIENTED_EDGE('',*,*,#439236,.T.); +#439236 = EDGE_CURVE('',#439228,#439237,#439239,.T.); +#439237 = VERTEX_POINT('',#439238); +#439238 = CARTESIAN_POINT('',(134.29,-110.519,1.585)); +#439239 = LINE('',#439240,#439241); +#439240 = CARTESIAN_POINT('',(134.29,-111.2,1.585)); +#439241 = VECTOR('',#439242,1.); +#439242 = DIRECTION('',(0.,1.,0.)); +#439243 = ORIENTED_EDGE('',*,*,#439244,.T.); +#439244 = EDGE_CURVE('',#439237,#439245,#439247,.T.); +#439245 = VERTEX_POINT('',#439246); +#439246 = CARTESIAN_POINT('',(134.294894,-110.495711,1.585)); +#439247 = LINE('',#439248,#439249); +#439248 = CARTESIAN_POINT('',(134.29,-110.519,1.585)); +#439249 = VECTOR('',#439250,1.); +#439250 = DIRECTION('',(0.205650446911,0.978625512484,0.)); +#439251 = ORIENTED_EDGE('',*,*,#439252,.T.); +#439252 = EDGE_CURVE('',#439245,#439253,#439255,.T.); +#439253 = VERTEX_POINT('',#439254); +#439254 = CARTESIAN_POINT('',(134.307227,-110.476923,1.585)); +#439255 = LINE('',#439256,#439257); +#439256 = CARTESIAN_POINT('',(134.294894,-110.495711,1.585)); +#439257 = VECTOR('',#439258,1.); +#439258 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#439259 = ORIENTED_EDGE('',*,*,#439260,.T.); +#439260 = EDGE_CURVE('',#439253,#439261,#439263,.T.); +#439261 = VERTEX_POINT('',#439262); +#439262 = CARTESIAN_POINT('',(135.457228,-109.307922,1.585)); +#439263 = LINE('',#439264,#439265); +#439264 = CARTESIAN_POINT('',(134.307227,-110.476923,1.585)); +#439265 = VECTOR('',#439266,1.); +#439266 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#439267 = ORIENTED_EDGE('',*,*,#439268,.T.); +#439268 = EDGE_CURVE('',#439261,#439113,#439269,.T.); +#439269 = LINE('',#439270,#439271); +#439270 = CARTESIAN_POINT('',(135.457228,-109.307922,1.585)); +#439271 = VECTOR('',#439272,1.); +#439272 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#439273 = PLANE('',#439274); +#439274 = AXIS2_PLACEMENT_3D('',#439275,#439276,#439277); +#439275 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439276 = DIRECTION('',(0.,0.,1.)); +#439277 = DIRECTION('',(1.,0.,-0.)); +#439278 = SHELL_BASED_SURFACE_MODEL('',(#439279)); +#439279 = OPEN_SHELL('',(#439280)); +#439280 = ADVANCED_FACE('',(#439281),#439445,.T.); +#439281 = FACE_BOUND('',#439282,.F.); +#439282 = EDGE_LOOP('',(#439283,#439293,#439301,#439309,#439317,#439325, + #439333,#439341,#439349,#439358,#439366,#439374,#439382,#439390, + #439398,#439407,#439415,#439423,#439431,#439439)); +#439283 = ORIENTED_EDGE('',*,*,#439284,.T.); +#439284 = EDGE_CURVE('',#439285,#439287,#439289,.T.); +#439285 = VERTEX_POINT('',#439286); +#439286 = CARTESIAN_POINT('',(145.727039,-109.294567,1.585)); +#439287 = VERTEX_POINT('',#439288); +#439288 = CARTESIAN_POINT('',(145.75,-109.29,1.585)); +#439289 = LINE('',#439290,#439291); +#439290 = CARTESIAN_POINT('',(145.727039,-109.294567,1.585)); +#439291 = VECTOR('',#439292,1.); +#439292 = DIRECTION('',(0.980787134598,0.195081000118,0.)); +#439293 = ORIENTED_EDGE('',*,*,#439294,.T.); +#439294 = EDGE_CURVE('',#439287,#439295,#439297,.T.); +#439295 = VERTEX_POINT('',#439296); +#439296 = CARTESIAN_POINT('',(149.75,-109.29,1.585)); +#439297 = LINE('',#439298,#439299); +#439298 = CARTESIAN_POINT('',(145.75,-109.29,1.585)); +#439299 = VECTOR('',#439300,1.); +#439300 = DIRECTION('',(1.,0.,0.)); +#439301 = ORIENTED_EDGE('',*,*,#439302,.T.); +#439302 = EDGE_CURVE('',#439295,#439303,#439305,.T.); +#439303 = VERTEX_POINT('',#439304); +#439304 = CARTESIAN_POINT('',(149.772961,-109.294567,1.585)); +#439305 = LINE('',#439306,#439307); +#439306 = CARTESIAN_POINT('',(149.75,-109.29,1.585)); +#439307 = VECTOR('',#439308,1.); +#439308 = DIRECTION('',(0.980787134598,-0.195081000118,0.)); +#439309 = ORIENTED_EDGE('',*,*,#439310,.T.); +#439310 = EDGE_CURVE('',#439303,#439311,#439313,.T.); +#439311 = VERTEX_POINT('',#439312); +#439312 = CARTESIAN_POINT('',(149.792426,-109.307574,1.585)); +#439313 = LINE('',#439314,#439315); +#439314 = CARTESIAN_POINT('',(149.772961,-109.294567,1.585)); +#439315 = VECTOR('',#439316,1.); +#439316 = DIRECTION('',(0.831451797698,-0.555596893535,0.)); +#439317 = ORIENTED_EDGE('',*,*,#439318,.T.); +#439318 = EDGE_CURVE('',#439311,#439319,#439321,.T.); +#439319 = VERTEX_POINT('',#439320); +#439320 = CARTESIAN_POINT('',(150.942427,-110.457574,1.585)); +#439321 = LINE('',#439322,#439323); +#439322 = CARTESIAN_POINT('',(149.792426,-109.307574,1.585)); +#439323 = VECTOR('',#439324,1.); +#439324 = DIRECTION('',(0.707107088624,-0.707106473749,0.)); +#439325 = ORIENTED_EDGE('',*,*,#439326,.T.); +#439326 = EDGE_CURVE('',#439319,#439327,#439329,.T.); +#439327 = VERTEX_POINT('',#439328); +#439328 = CARTESIAN_POINT('',(150.955433,-110.477039,1.585)); +#439329 = LINE('',#439330,#439331); +#439330 = CARTESIAN_POINT('',(150.942427,-110.457574,1.585)); +#439331 = VECTOR('',#439332,1.); +#439332 = DIRECTION('',(0.555567362933,-0.831471530026,0.)); +#439333 = ORIENTED_EDGE('',*,*,#439334,.T.); +#439334 = EDGE_CURVE('',#439327,#439335,#439337,.T.); +#439335 = VERTEX_POINT('',#439336); +#439336 = CARTESIAN_POINT('',(150.96,-110.5,1.585)); +#439337 = LINE('',#439338,#439339); +#439338 = CARTESIAN_POINT('',(150.955433,-110.477039,1.585)); +#439339 = VECTOR('',#439340,1.); +#439340 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#439341 = ORIENTED_EDGE('',*,*,#439342,.T.); +#439342 = EDGE_CURVE('',#439335,#439343,#439345,.T.); +#439343 = VERTEX_POINT('',#439344); +#439344 = CARTESIAN_POINT('',(150.96,-111.2,1.585)); +#439345 = LINE('',#439346,#439347); +#439346 = CARTESIAN_POINT('',(150.96,-110.5,1.585)); +#439347 = VECTOR('',#439348,1.); +#439348 = DIRECTION('',(0.,-1.,0.)); +#439349 = ORIENTED_EDGE('',*,*,#439350,.T.); +#439350 = EDGE_CURVE('',#439343,#439351,#439353,.T.); +#439351 = VERTEX_POINT('',#439352); +#439352 = CARTESIAN_POINT('',(150.84,-111.2,1.585)); +#439353 = CIRCLE('',#439354,6.000000000042E-02); +#439354 = AXIS2_PLACEMENT_3D('',#439355,#439356,#439357); +#439355 = CARTESIAN_POINT('',(150.9,-111.2000002255,1.585)); +#439356 = DIRECTION('',(0.,0.,-1.)); +#439357 = DIRECTION('',(0.999999999993,3.75979377999E-06,0.)); +#439358 = ORIENTED_EDGE('',*,*,#439359,.T.); +#439359 = EDGE_CURVE('',#439351,#439360,#439362,.T.); +#439360 = VERTEX_POINT('',#439361); +#439361 = CARTESIAN_POINT('',(150.84,-110.524852,1.585)); +#439362 = LINE('',#439363,#439364); +#439363 = CARTESIAN_POINT('',(150.84,-111.2,1.585)); +#439364 = VECTOR('',#439365,1.); +#439365 = DIRECTION('',(0.,1.,0.)); +#439366 = ORIENTED_EDGE('',*,*,#439367,.T.); +#439367 = EDGE_CURVE('',#439360,#439368,#439370,.T.); +#439368 = VERTEX_POINT('',#439369); +#439369 = CARTESIAN_POINT('',(149.725148,-109.41,1.585)); +#439370 = LINE('',#439371,#439372); +#439371 = CARTESIAN_POINT('',(150.84,-110.524852,1.585)); +#439372 = VECTOR('',#439373,1.); +#439373 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#439374 = ORIENTED_EDGE('',*,*,#439375,.T.); +#439375 = EDGE_CURVE('',#439368,#439376,#439378,.T.); +#439376 = VERTEX_POINT('',#439377); +#439377 = CARTESIAN_POINT('',(145.775141,-109.41,1.585)); +#439378 = LINE('',#439379,#439380); +#439379 = CARTESIAN_POINT('',(149.725148,-109.41,1.585)); +#439380 = VECTOR('',#439381,1.); +#439381 = DIRECTION('',(-1.,0.,0.)); +#439382 = ORIENTED_EDGE('',*,*,#439383,.T.); +#439383 = EDGE_CURVE('',#439376,#439384,#439386,.T.); +#439384 = VERTEX_POINT('',#439385); +#439385 = CARTESIAN_POINT('',(144.66,-110.543565,1.585)); +#439386 = LINE('',#439387,#439388); +#439387 = CARTESIAN_POINT('',(145.775141,-109.41,1.585)); +#439388 = VECTOR('',#439389,1.); +#439389 = DIRECTION('',(-0.701289807093,-0.712876291139,0.)); +#439390 = ORIENTED_EDGE('',*,*,#439391,.T.); +#439391 = EDGE_CURVE('',#439384,#439392,#439394,.T.); +#439392 = VERTEX_POINT('',#439393); +#439393 = CARTESIAN_POINT('',(144.66,-111.2,1.585)); +#439394 = LINE('',#439395,#439396); +#439395 = CARTESIAN_POINT('',(144.66,-110.543565,1.585)); +#439396 = VECTOR('',#439397,1.); +#439397 = DIRECTION('',(0.,-1.,0.)); +#439398 = ORIENTED_EDGE('',*,*,#439399,.T.); +#439399 = EDGE_CURVE('',#439392,#439400,#439402,.T.); +#439400 = VERTEX_POINT('',#439401); +#439401 = CARTESIAN_POINT('',(144.54,-111.2,1.585)); +#439402 = CIRCLE('',#439403,6.000000000043E-02); +#439403 = AXIS2_PLACEMENT_3D('',#439404,#439405,#439406); +#439404 = CARTESIAN_POINT('',(144.6,-111.2000002255,1.585)); +#439405 = DIRECTION('',(0.,0.,-1.)); +#439406 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#439407 = ORIENTED_EDGE('',*,*,#439408,.T.); +#439408 = EDGE_CURVE('',#439400,#439409,#439411,.T.); +#439409 = VERTEX_POINT('',#439410); +#439410 = CARTESIAN_POINT('',(144.54,-110.519,1.585)); +#439411 = LINE('',#439412,#439413); +#439412 = CARTESIAN_POINT('',(144.54,-111.2,1.585)); +#439413 = VECTOR('',#439414,1.); +#439414 = DIRECTION('',(0.,1.,0.)); +#439415 = ORIENTED_EDGE('',*,*,#439416,.T.); +#439416 = EDGE_CURVE('',#439409,#439417,#439419,.T.); +#439417 = VERTEX_POINT('',#439418); +#439418 = CARTESIAN_POINT('',(144.544894,-110.495711,1.585)); +#439419 = LINE('',#439420,#439421); +#439420 = CARTESIAN_POINT('',(144.54,-110.519,1.585)); +#439421 = VECTOR('',#439422,1.); +#439422 = DIRECTION('',(0.205650446911,0.978625512484,0.)); +#439423 = ORIENTED_EDGE('',*,*,#439424,.T.); +#439424 = EDGE_CURVE('',#439417,#439425,#439427,.T.); +#439425 = VERTEX_POINT('',#439426); +#439426 = CARTESIAN_POINT('',(144.557227,-110.476923,1.585)); +#439427 = LINE('',#439428,#439429); +#439428 = CARTESIAN_POINT('',(144.544894,-110.495711,1.585)); +#439429 = VECTOR('',#439430,1.); +#439430 = DIRECTION('',(0.548761403716,0.835979019947,0.)); +#439431 = ORIENTED_EDGE('',*,*,#439432,.T.); +#439432 = EDGE_CURVE('',#439425,#439433,#439435,.T.); +#439433 = VERTEX_POINT('',#439434); +#439434 = CARTESIAN_POINT('',(145.707228,-109.307922,1.585)); +#439435 = LINE('',#439436,#439437); +#439436 = CARTESIAN_POINT('',(144.557227,-110.476923,1.585)); +#439437 = VECTOR('',#439438,1.); +#439438 = DIRECTION('',(0.701289790532,0.712876307431,0.)); +#439439 = ORIENTED_EDGE('',*,*,#439440,.T.); +#439440 = EDGE_CURVE('',#439433,#439285,#439441,.T.); +#439441 = LINE('',#439442,#439443); +#439442 = CARTESIAN_POINT('',(145.707228,-109.307922,1.585)); +#439443 = VECTOR('',#439444,1.); +#439444 = DIRECTION('',(0.829186722164,0.558971716446,0.)); +#439445 = PLANE('',#439446); +#439446 = AXIS2_PLACEMENT_3D('',#439447,#439448,#439449); +#439447 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439448 = DIRECTION('',(0.,0.,1.)); +#439449 = DIRECTION('',(1.,0.,-0.)); +#439450 = SHELL_BASED_SURFACE_MODEL('',(#439451)); +#439451 = OPEN_SHELL('',(#439452)); +#439452 = ADVANCED_FACE('',(#439453),#439627,.T.); +#439453 = FACE_BOUND('',#439454,.F.); +#439454 = EDGE_LOOP('',(#439455,#439466,#439474,#439482,#439491,#439499, + #439507,#439515,#439523,#439531,#439540,#439548,#439556,#439564, + #439572,#439580,#439588,#439597,#439605,#439613,#439621)); +#439455 = ORIENTED_EDGE('',*,*,#439456,.T.); +#439456 = EDGE_CURVE('',#439457,#439459,#439461,.T.); +#439457 = VERTEX_POINT('',#439458); +#439458 = CARTESIAN_POINT('',(126.065474,-107.828459,1.585)); +#439459 = VERTEX_POINT('',#439460); +#439460 = CARTESIAN_POINT('',(126.182142,-107.890819,1.585)); +#439461 = CIRCLE('',#439462,7.500000000003E-02); +#439462 = AXIS2_PLACEMENT_3D('',#439463,#439464,#439465); +#439463 = CARTESIAN_POINT('',(126.107142,-107.8908190655,1.585)); +#439464 = DIRECTION('',(0.,0.,-1.)); +#439465 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#439466 = ORIENTED_EDGE('',*,*,#439467,.T.); +#439467 = EDGE_CURVE('',#439459,#439468,#439470,.T.); +#439468 = VERTEX_POINT('',#439469); +#439469 = CARTESIAN_POINT('',(126.182142,-108.149152,1.585)); +#439470 = LINE('',#439471,#439472); +#439471 = CARTESIAN_POINT('',(126.182142,-107.890819,1.585)); +#439472 = VECTOR('',#439473,1.); +#439473 = DIRECTION('',(0.,-1.,0.)); +#439474 = ORIENTED_EDGE('',*,*,#439475,.T.); +#439475 = EDGE_CURVE('',#439468,#439476,#439478,.T.); +#439476 = VERTEX_POINT('',#439477); +#439477 = CARTESIAN_POINT('',(126.359869,-108.150593,1.585)); +#439478 = LINE('',#439479,#439480); +#439479 = CARTESIAN_POINT('',(126.182142,-108.149152,1.585)); +#439480 = VECTOR('',#439481,1.); +#439481 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#439482 = ORIENTED_EDGE('',*,*,#439483,.T.); +#439483 = EDGE_CURVE('',#439476,#439484,#439486,.T.); +#439484 = VERTEX_POINT('',#439485); +#439485 = CARTESIAN_POINT('',(126.345237,-108.299152,1.585)); +#439486 = CIRCLE('',#439487,7.500006711464E-02); +#439487 = AXIS2_PLACEMENT_3D('',#439488,#439489,#439490); +#439488 = CARTESIAN_POINT('',(126.34523706711,-108.2241519328,1.585)); +#439489 = DIRECTION('',(0.,0.,-1.)); +#439490 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439491 = ORIENTED_EDGE('',*,*,#439492,.T.); +#439492 = EDGE_CURVE('',#439484,#439493,#439495,.T.); +#439493 = VERTEX_POINT('',#439494); +#439494 = CARTESIAN_POINT('',(126.182142,-108.299152,1.585)); +#439495 = LINE('',#439496,#439497); +#439496 = CARTESIAN_POINT('',(126.345237,-108.299152,1.585)); +#439497 = VECTOR('',#439498,1.); +#439498 = DIRECTION('',(-1.,0.,0.)); +#439499 = ORIENTED_EDGE('',*,*,#439500,.T.); +#439500 = EDGE_CURVE('',#439493,#439501,#439503,.T.); +#439501 = VERTEX_POINT('',#439502); +#439502 = CARTESIAN_POINT('',(126.182142,-108.730256,1.585)); +#439503 = LINE('',#439504,#439505); +#439504 = CARTESIAN_POINT('',(126.182142,-108.299152,1.585)); +#439505 = VECTOR('',#439506,1.); +#439506 = DIRECTION('',(0.,-1.,0.)); +#439507 = ORIENTED_EDGE('',*,*,#439508,.T.); +#439508 = EDGE_CURVE('',#439501,#439509,#439511,.T.); +#439509 = VERTEX_POINT('',#439510); +#439510 = CARTESIAN_POINT('',(126.210662,-108.787298,1.585)); +#439511 = LINE('',#439512,#439513); +#439512 = CARTESIAN_POINT('',(126.182142,-108.730256,1.585)); +#439513 = VECTOR('',#439514,1.); +#439514 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#439515 = ORIENTED_EDGE('',*,*,#439516,.T.); +#439516 = EDGE_CURVE('',#439509,#439517,#439519,.T.); +#439517 = VERTEX_POINT('',#439518); +#439518 = CARTESIAN_POINT('',(126.267704,-108.815819,1.585)); +#439519 = LINE('',#439520,#439521); +#439520 = CARTESIAN_POINT('',(126.210662,-108.787298,1.585)); +#439521 = VECTOR('',#439522,1.); +#439522 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#439523 = ORIENTED_EDGE('',*,*,#439524,.T.); +#439524 = EDGE_CURVE('',#439517,#439525,#439527,.T.); +#439525 = VERTEX_POINT('',#439526); +#439526 = CARTESIAN_POINT('',(126.359869,-108.81726,1.585)); +#439527 = LINE('',#439528,#439529); +#439528 = CARTESIAN_POINT('',(126.267704,-108.815819,1.585)); +#439529 = VECTOR('',#439530,1.); +#439530 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#439531 = ORIENTED_EDGE('',*,*,#439532,.T.); +#439532 = EDGE_CURVE('',#439525,#439533,#439535,.T.); +#439533 = VERTEX_POINT('',#439534); +#439534 = CARTESIAN_POINT('',(126.345237,-108.965819,1.585)); +#439535 = CIRCLE('',#439536,7.500006711464E-02); +#439536 = AXIS2_PLACEMENT_3D('',#439537,#439538,#439539); +#439537 = CARTESIAN_POINT('',(126.34523706711,-108.8908189328,1.585)); +#439538 = DIRECTION('',(0.,0.,-1.)); +#439539 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439540 = ORIENTED_EDGE('',*,*,#439541,.T.); +#439541 = EDGE_CURVE('',#439533,#439542,#439544,.T.); +#439542 = VERTEX_POINT('',#439543); +#439543 = CARTESIAN_POINT('',(126.230189,-108.963156,1.585)); +#439544 = LINE('',#439545,#439546); +#439545 = CARTESIAN_POINT('',(126.345237,-108.965819,1.585)); +#439546 = VECTOR('',#439547,1.); +#439547 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#439548 = ORIENTED_EDGE('',*,*,#439549,.T.); +#439549 = EDGE_CURVE('',#439542,#439550,#439552,.T.); +#439550 = VERTEX_POINT('',#439551); +#439551 = CARTESIAN_POINT('',(126.108777,-108.90245,1.585)); +#439552 = LINE('',#439553,#439554); +#439553 = CARTESIAN_POINT('',(126.230189,-108.963156,1.585)); +#439554 = VECTOR('',#439555,1.); +#439555 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#439556 = ORIENTED_EDGE('',*,*,#439557,.T.); +#439557 = EDGE_CURVE('',#439550,#439558,#439560,.T.); +#439558 = VERTEX_POINT('',#439559); +#439559 = CARTESIAN_POINT('',(126.087679,-108.876741,1.585)); +#439560 = LINE('',#439561,#439562); +#439561 = CARTESIAN_POINT('',(126.108777,-108.90245,1.585)); +#439562 = VECTOR('',#439563,1.); +#439563 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#439564 = ORIENTED_EDGE('',*,*,#439565,.T.); +#439565 = EDGE_CURVE('',#439558,#439566,#439568,.T.); +#439566 = VERTEX_POINT('',#439567); +#439567 = CARTESIAN_POINT('',(126.033583,-108.762593,1.585)); +#439568 = LINE('',#439569,#439570); +#439569 = CARTESIAN_POINT('',(126.087679,-108.876741,1.585)); +#439570 = VECTOR('',#439571,1.); +#439571 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#439572 = ORIENTED_EDGE('',*,*,#439573,.T.); +#439573 = EDGE_CURVE('',#439566,#439574,#439576,.T.); +#439574 = VERTEX_POINT('',#439575); +#439575 = CARTESIAN_POINT('',(126.032142,-108.299152,1.585)); +#439576 = LINE('',#439577,#439578); +#439577 = CARTESIAN_POINT('',(126.033583,-108.762593,1.585)); +#439578 = VECTOR('',#439579,1.); +#439579 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#439580 = ORIENTED_EDGE('',*,*,#439581,.T.); +#439581 = EDGE_CURVE('',#439574,#439582,#439584,.T.); +#439582 = VERTEX_POINT('',#439583); +#439583 = CARTESIAN_POINT('',(125.949653,-108.297711,1.585)); +#439584 = LINE('',#439585,#439586); +#439585 = CARTESIAN_POINT('',(126.032142,-108.299152,1.585)); +#439586 = VECTOR('',#439587,1.); +#439587 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#439588 = ORIENTED_EDGE('',*,*,#439589,.T.); +#439589 = EDGE_CURVE('',#439582,#439590,#439592,.T.); +#439590 = VERTEX_POINT('',#439591); +#439591 = CARTESIAN_POINT('',(125.964285,-108.149152,1.585)); +#439592 = CIRCLE('',#439593,7.500006711464E-02); +#439593 = AXIS2_PLACEMENT_3D('',#439594,#439595,#439596); +#439594 = CARTESIAN_POINT('',(125.96428493288,-108.2241520671,1.585)); +#439595 = DIRECTION('',(0.,0.,-1.)); +#439596 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#439597 = ORIENTED_EDGE('',*,*,#439598,.T.); +#439598 = EDGE_CURVE('',#439590,#439599,#439601,.T.); +#439599 = VERTEX_POINT('',#439600); +#439600 = CARTESIAN_POINT('',(126.032142,-108.149152,1.585)); +#439601 = LINE('',#439602,#439603); +#439602 = CARTESIAN_POINT('',(125.964285,-108.149152,1.585)); +#439603 = VECTOR('',#439604,1.); +#439604 = DIRECTION('',(1.,0.,0.)); +#439605 = ORIENTED_EDGE('',*,*,#439606,.T.); +#439606 = EDGE_CURVE('',#439599,#439607,#439609,.T.); +#439607 = VERTEX_POINT('',#439608); +#439608 = CARTESIAN_POINT('',(126.033583,-107.876187,1.585)); +#439609 = LINE('',#439610,#439611); +#439610 = CARTESIAN_POINT('',(126.032142,-108.149152,1.585)); +#439611 = VECTOR('',#439612,1.); +#439612 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#439613 = ORIENTED_EDGE('',*,*,#439614,.T.); +#439614 = EDGE_CURVE('',#439607,#439615,#439617,.T.); +#439615 = VERTEX_POINT('',#439616); +#439616 = CARTESIAN_POINT('',(126.044782,-107.849151,1.585)); +#439617 = LINE('',#439618,#439619); +#439618 = CARTESIAN_POINT('',(126.033583,-107.876187,1.585)); +#439619 = VECTOR('',#439620,1.); +#439620 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#439621 = ORIENTED_EDGE('',*,*,#439622,.T.); +#439622 = EDGE_CURVE('',#439615,#439457,#439623,.T.); +#439623 = LINE('',#439624,#439625); +#439624 = CARTESIAN_POINT('',(126.044782,-107.849151,1.585)); +#439625 = VECTOR('',#439626,1.); +#439626 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#439627 = PLANE('',#439628); +#439628 = AXIS2_PLACEMENT_3D('',#439629,#439630,#439631); +#439629 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439630 = DIRECTION('',(0.,0.,1.)); +#439631 = DIRECTION('',(1.,0.,-0.)); +#439632 = SHELL_BASED_SURFACE_MODEL('',(#439633)); +#439633 = OPEN_SHELL('',(#439634)); +#439634 = ADVANCED_FACE('',(#439635),#439809,.T.); +#439635 = FACE_BOUND('',#439636,.F.); +#439636 = EDGE_LOOP('',(#439637,#439648,#439656,#439664,#439673,#439681, + #439689,#439697,#439705,#439713,#439722,#439730,#439738,#439746, + #439754,#439762,#439770,#439779,#439787,#439795,#439803)); +#439637 = ORIENTED_EDGE('',*,*,#439638,.T.); +#439638 = EDGE_CURVE('',#439639,#439641,#439643,.T.); +#439639 = VERTEX_POINT('',#439640); +#439640 = CARTESIAN_POINT('',(126.636903,-107.828459,1.585)); +#439641 = VERTEX_POINT('',#439642); +#439642 = CARTESIAN_POINT('',(126.753571,-107.890819,1.585)); +#439643 = CIRCLE('',#439644,7.500000000002E-02); +#439644 = AXIS2_PLACEMENT_3D('',#439645,#439646,#439647); +#439645 = CARTESIAN_POINT('',(126.678571,-107.8908190655,1.585)); +#439646 = DIRECTION('',(0.,0.,-1.)); +#439647 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#439648 = ORIENTED_EDGE('',*,*,#439649,.T.); +#439649 = EDGE_CURVE('',#439641,#439650,#439652,.T.); +#439650 = VERTEX_POINT('',#439651); +#439651 = CARTESIAN_POINT('',(126.753571,-108.149152,1.585)); +#439652 = LINE('',#439653,#439654); +#439653 = CARTESIAN_POINT('',(126.753571,-107.890819,1.585)); +#439654 = VECTOR('',#439655,1.); +#439655 = DIRECTION('',(0.,-1.,0.)); +#439656 = ORIENTED_EDGE('',*,*,#439657,.T.); +#439657 = EDGE_CURVE('',#439650,#439658,#439660,.T.); +#439658 = VERTEX_POINT('',#439659); +#439659 = CARTESIAN_POINT('',(126.931298,-108.150593,1.585)); +#439660 = LINE('',#439661,#439662); +#439661 = CARTESIAN_POINT('',(126.753571,-108.149152,1.585)); +#439662 = VECTOR('',#439663,1.); +#439663 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#439664 = ORIENTED_EDGE('',*,*,#439665,.T.); +#439665 = EDGE_CURVE('',#439658,#439666,#439668,.T.); +#439666 = VERTEX_POINT('',#439667); +#439667 = CARTESIAN_POINT('',(126.916666,-108.299152,1.585)); +#439668 = CIRCLE('',#439669,7.500006711464E-02); +#439669 = AXIS2_PLACEMENT_3D('',#439670,#439671,#439672); +#439670 = CARTESIAN_POINT('',(126.91666606711,-108.2241519328,1.585)); +#439671 = DIRECTION('',(0.,0.,-1.)); +#439672 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439673 = ORIENTED_EDGE('',*,*,#439674,.T.); +#439674 = EDGE_CURVE('',#439666,#439675,#439677,.T.); +#439675 = VERTEX_POINT('',#439676); +#439676 = CARTESIAN_POINT('',(126.753571,-108.299152,1.585)); +#439677 = LINE('',#439678,#439679); +#439678 = CARTESIAN_POINT('',(126.916666,-108.299152,1.585)); +#439679 = VECTOR('',#439680,1.); +#439680 = DIRECTION('',(-1.,0.,0.)); +#439681 = ORIENTED_EDGE('',*,*,#439682,.T.); +#439682 = EDGE_CURVE('',#439675,#439683,#439685,.T.); +#439683 = VERTEX_POINT('',#439684); +#439684 = CARTESIAN_POINT('',(126.753571,-108.730256,1.585)); +#439685 = LINE('',#439686,#439687); +#439686 = CARTESIAN_POINT('',(126.753571,-108.299152,1.585)); +#439687 = VECTOR('',#439688,1.); +#439688 = DIRECTION('',(0.,-1.,0.)); +#439689 = ORIENTED_EDGE('',*,*,#439690,.T.); +#439690 = EDGE_CURVE('',#439683,#439691,#439693,.T.); +#439691 = VERTEX_POINT('',#439692); +#439692 = CARTESIAN_POINT('',(126.782091,-108.787298,1.585)); +#439693 = LINE('',#439694,#439695); +#439694 = CARTESIAN_POINT('',(126.753571,-108.730256,1.585)); +#439695 = VECTOR('',#439696,1.); +#439696 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#439697 = ORIENTED_EDGE('',*,*,#439698,.T.); +#439698 = EDGE_CURVE('',#439691,#439699,#439701,.T.); +#439699 = VERTEX_POINT('',#439700); +#439700 = CARTESIAN_POINT('',(126.839133,-108.815819,1.585)); +#439701 = LINE('',#439702,#439703); +#439702 = CARTESIAN_POINT('',(126.782091,-108.787298,1.585)); +#439703 = VECTOR('',#439704,1.); +#439704 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#439705 = ORIENTED_EDGE('',*,*,#439706,.T.); +#439706 = EDGE_CURVE('',#439699,#439707,#439709,.T.); +#439707 = VERTEX_POINT('',#439708); +#439708 = CARTESIAN_POINT('',(126.931298,-108.81726,1.585)); +#439709 = LINE('',#439710,#439711); +#439710 = CARTESIAN_POINT('',(126.839133,-108.815819,1.585)); +#439711 = VECTOR('',#439712,1.); +#439712 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#439713 = ORIENTED_EDGE('',*,*,#439714,.T.); +#439714 = EDGE_CURVE('',#439707,#439715,#439717,.T.); +#439715 = VERTEX_POINT('',#439716); +#439716 = CARTESIAN_POINT('',(126.916666,-108.965819,1.585)); +#439717 = CIRCLE('',#439718,7.500006711463E-02); +#439718 = AXIS2_PLACEMENT_3D('',#439719,#439720,#439721); +#439719 = CARTESIAN_POINT('',(126.91666606711,-108.8908189328,1.585)); +#439720 = DIRECTION('',(0.,0.,-1.)); +#439721 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439722 = ORIENTED_EDGE('',*,*,#439723,.T.); +#439723 = EDGE_CURVE('',#439715,#439724,#439726,.T.); +#439724 = VERTEX_POINT('',#439725); +#439725 = CARTESIAN_POINT('',(126.801618,-108.963156,1.585)); +#439726 = LINE('',#439727,#439728); +#439727 = CARTESIAN_POINT('',(126.916666,-108.965819,1.585)); +#439728 = VECTOR('',#439729,1.); +#439729 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#439730 = ORIENTED_EDGE('',*,*,#439731,.T.); +#439731 = EDGE_CURVE('',#439724,#439732,#439734,.T.); +#439732 = VERTEX_POINT('',#439733); +#439733 = CARTESIAN_POINT('',(126.680206,-108.90245,1.585)); +#439734 = LINE('',#439735,#439736); +#439735 = CARTESIAN_POINT('',(126.801618,-108.963156,1.585)); +#439736 = VECTOR('',#439737,1.); +#439737 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#439738 = ORIENTED_EDGE('',*,*,#439739,.T.); +#439739 = EDGE_CURVE('',#439732,#439740,#439742,.T.); +#439740 = VERTEX_POINT('',#439741); +#439741 = CARTESIAN_POINT('',(126.659108,-108.876741,1.585)); +#439742 = LINE('',#439743,#439744); +#439743 = CARTESIAN_POINT('',(126.680206,-108.90245,1.585)); +#439744 = VECTOR('',#439745,1.); +#439745 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#439746 = ORIENTED_EDGE('',*,*,#439747,.T.); +#439747 = EDGE_CURVE('',#439740,#439748,#439750,.T.); +#439748 = VERTEX_POINT('',#439749); +#439749 = CARTESIAN_POINT('',(126.605012,-108.762593,1.585)); +#439750 = LINE('',#439751,#439752); +#439751 = CARTESIAN_POINT('',(126.659108,-108.876741,1.585)); +#439752 = VECTOR('',#439753,1.); +#439753 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#439754 = ORIENTED_EDGE('',*,*,#439755,.T.); +#439755 = EDGE_CURVE('',#439748,#439756,#439758,.T.); +#439756 = VERTEX_POINT('',#439757); +#439757 = CARTESIAN_POINT('',(126.603571,-108.299152,1.585)); +#439758 = LINE('',#439759,#439760); +#439759 = CARTESIAN_POINT('',(126.605012,-108.762593,1.585)); +#439760 = VECTOR('',#439761,1.); +#439761 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#439762 = ORIENTED_EDGE('',*,*,#439763,.T.); +#439763 = EDGE_CURVE('',#439756,#439764,#439766,.T.); +#439764 = VERTEX_POINT('',#439765); +#439765 = CARTESIAN_POINT('',(126.521082,-108.297711,1.585)); +#439766 = LINE('',#439767,#439768); +#439767 = CARTESIAN_POINT('',(126.603571,-108.299152,1.585)); +#439768 = VECTOR('',#439769,1.); +#439769 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#439770 = ORIENTED_EDGE('',*,*,#439771,.T.); +#439771 = EDGE_CURVE('',#439764,#439772,#439774,.T.); +#439772 = VERTEX_POINT('',#439773); +#439773 = CARTESIAN_POINT('',(126.535714,-108.149152,1.585)); +#439774 = CIRCLE('',#439775,7.500006711464E-02); +#439775 = AXIS2_PLACEMENT_3D('',#439776,#439777,#439778); +#439776 = CARTESIAN_POINT('',(126.53571393288,-108.2241520671,1.585)); +#439777 = DIRECTION('',(0.,0.,-1.)); +#439778 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#439779 = ORIENTED_EDGE('',*,*,#439780,.T.); +#439780 = EDGE_CURVE('',#439772,#439781,#439783,.T.); +#439781 = VERTEX_POINT('',#439782); +#439782 = CARTESIAN_POINT('',(126.603571,-108.149152,1.585)); +#439783 = LINE('',#439784,#439785); +#439784 = CARTESIAN_POINT('',(126.535714,-108.149152,1.585)); +#439785 = VECTOR('',#439786,1.); +#439786 = DIRECTION('',(1.,0.,0.)); +#439787 = ORIENTED_EDGE('',*,*,#439788,.T.); +#439788 = EDGE_CURVE('',#439781,#439789,#439791,.T.); +#439789 = VERTEX_POINT('',#439790); +#439790 = CARTESIAN_POINT('',(126.605012,-107.876187,1.585)); +#439791 = LINE('',#439792,#439793); +#439792 = CARTESIAN_POINT('',(126.603571,-108.149152,1.585)); +#439793 = VECTOR('',#439794,1.); +#439794 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#439795 = ORIENTED_EDGE('',*,*,#439796,.T.); +#439796 = EDGE_CURVE('',#439789,#439797,#439799,.T.); +#439797 = VERTEX_POINT('',#439798); +#439798 = CARTESIAN_POINT('',(126.616211,-107.849151,1.585)); +#439799 = LINE('',#439800,#439801); +#439800 = CARTESIAN_POINT('',(126.605012,-107.876187,1.585)); +#439801 = VECTOR('',#439802,1.); +#439802 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#439803 = ORIENTED_EDGE('',*,*,#439804,.T.); +#439804 = EDGE_CURVE('',#439797,#439639,#439805,.T.); +#439805 = LINE('',#439806,#439807); +#439806 = CARTESIAN_POINT('',(126.616211,-107.849151,1.585)); +#439807 = VECTOR('',#439808,1.); +#439808 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#439809 = PLANE('',#439810); +#439810 = AXIS2_PLACEMENT_3D('',#439811,#439812,#439813); +#439811 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439812 = DIRECTION('',(0.,0.,1.)); +#439813 = DIRECTION('',(1.,0.,-0.)); +#439814 = SHELL_BASED_SURFACE_MODEL('',(#439815)); +#439815 = OPEN_SHELL('',(#439816)); +#439816 = ADVANCED_FACE('',(#439817),#439951,.T.); +#439817 = FACE_BOUND('',#439818,.F.); +#439818 = EDGE_LOOP('',(#439819,#439829,#439837,#439846,#439854,#439862, + #439871,#439879,#439888,#439896,#439904,#439912,#439920,#439929, + #439937,#439945)); +#439819 = ORIENTED_EDGE('',*,*,#439820,.T.); +#439820 = EDGE_CURVE('',#439821,#439823,#439825,.T.); +#439821 = VERTEX_POINT('',#439822); +#439822 = CARTESIAN_POINT('',(130.006436,-107.837841,1.585)); +#439823 = VERTEX_POINT('',#439824); +#439824 = CARTESIAN_POINT('',(130.044892,-107.81726,1.585)); +#439825 = LINE('',#439826,#439827); +#439826 = CARTESIAN_POINT('',(130.006436,-107.837841,1.585)); +#439827 = VECTOR('',#439828,1.); +#439828 = DIRECTION('',(0.881674852639,0.471857451169,0.)); +#439829 = ORIENTED_EDGE('',*,*,#439830,.T.); +#439830 = EDGE_CURVE('',#439823,#439831,#439833,.T.); +#439831 = VERTEX_POINT('',#439832); +#439832 = CARTESIAN_POINT('',(130.066729,-107.81726,1.585)); +#439833 = LINE('',#439834,#439835); +#439834 = CARTESIAN_POINT('',(130.044892,-107.81726,1.585)); +#439835 = VECTOR('',#439836,1.); +#439836 = DIRECTION('',(1.,0.,0.)); +#439837 = ORIENTED_EDGE('',*,*,#439838,.T.); +#439838 = EDGE_CURVE('',#439831,#439839,#439841,.T.); +#439839 = VERTEX_POINT('',#439840); +#439840 = CARTESIAN_POINT('',(130.134524,-107.890819,1.585)); +#439841 = CIRCLE('',#439842,7.216898094227E-02); +#439842 = AXIS2_PLACEMENT_3D('',#439843,#439844,#439845); +#439843 = CARTESIAN_POINT('',(130.06237106389,-107.8892972834,1.585)); +#439844 = DIRECTION('',(0.,0.,-1.)); +#439845 = DIRECTION('',(6.038516895266E-02,0.998175150648,0.)); +#439846 = ORIENTED_EDGE('',*,*,#439847,.T.); +#439847 = EDGE_CURVE('',#439839,#439848,#439850,.T.); +#439848 = VERTEX_POINT('',#439849); +#439849 = CARTESIAN_POINT('',(130.134524,-108.815819,1.585)); +#439850 = LINE('',#439851,#439852); +#439851 = CARTESIAN_POINT('',(130.134524,-107.890819,1.585)); +#439852 = VECTOR('',#439853,1.); +#439853 = DIRECTION('',(0.,-1.,0.)); +#439854 = ORIENTED_EDGE('',*,*,#439855,.T.); +#439855 = EDGE_CURVE('',#439848,#439856,#439858,.T.); +#439856 = VERTEX_POINT('',#439857); +#439857 = CARTESIAN_POINT('',(130.35987,-108.81726,1.585)); +#439858 = LINE('',#439859,#439860); +#439859 = CARTESIAN_POINT('',(130.134524,-108.815819,1.585)); +#439860 = VECTOR('',#439861,1.); +#439861 = DIRECTION('',(0.999979555102,-6.394480216655E-03,0.)); +#439862 = ORIENTED_EDGE('',*,*,#439863,.T.); +#439863 = EDGE_CURVE('',#439856,#439864,#439866,.T.); +#439864 = VERTEX_POINT('',#439865); +#439865 = CARTESIAN_POINT('',(130.345238,-108.965819,1.585)); +#439866 = CIRCLE('',#439867,7.500006711462E-02); +#439867 = AXIS2_PLACEMENT_3D('',#439868,#439869,#439870); +#439868 = CARTESIAN_POINT('',(130.34523806711,-108.8908189328,1.585)); +#439869 = DIRECTION('',(0.,0.,-1.)); +#439870 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439871 = ORIENTED_EDGE('',*,*,#439872,.T.); +#439872 = EDGE_CURVE('',#439864,#439873,#439875,.T.); +#439873 = VERTEX_POINT('',#439874); +#439874 = CARTESIAN_POINT('',(129.759178,-108.964378,1.585)); +#439875 = LINE('',#439876,#439877); +#439876 = CARTESIAN_POINT('',(130.345238,-108.965819,1.585)); +#439877 = VECTOR('',#439878,1.); +#439878 = DIRECTION('',(-0.999996977183,2.45878518261E-03,0.)); +#439879 = ORIENTED_EDGE('',*,*,#439880,.T.); +#439880 = EDGE_CURVE('',#439873,#439881,#439883,.T.); +#439881 = VERTEX_POINT('',#439882); +#439882 = CARTESIAN_POINT('',(129.77381,-108.815819,1.585)); +#439883 = CIRCLE('',#439884,7.500006711464E-02); +#439884 = AXIS2_PLACEMENT_3D('',#439885,#439886,#439887); +#439885 = CARTESIAN_POINT('',(129.77380993288,-108.8908190671,1.585)); +#439886 = DIRECTION('',(0.,0.,-1.)); +#439887 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#439888 = ORIENTED_EDGE('',*,*,#439889,.T.); +#439889 = EDGE_CURVE('',#439881,#439890,#439892,.T.); +#439890 = VERTEX_POINT('',#439891); +#439891 = CARTESIAN_POINT('',(129.984524,-108.815819,1.585)); +#439892 = LINE('',#439893,#439894); +#439893 = CARTESIAN_POINT('',(129.77381,-108.815819,1.585)); +#439894 = VECTOR('',#439895,1.); +#439895 = DIRECTION('',(1.,0.,0.)); +#439896 = ORIENTED_EDGE('',*,*,#439897,.T.); +#439897 = EDGE_CURVE('',#439890,#439898,#439900,.T.); +#439898 = VERTEX_POINT('',#439899); +#439899 = CARTESIAN_POINT('',(129.984524,-108.119504,1.585)); +#439900 = LINE('',#439901,#439902); +#439901 = CARTESIAN_POINT('',(129.984524,-108.815819,1.585)); +#439902 = VECTOR('',#439903,1.); +#439903 = DIRECTION('',(0.,1.,0.)); +#439904 = ORIENTED_EDGE('',*,*,#439905,.T.); +#439905 = EDGE_CURVE('',#439898,#439906,#439908,.T.); +#439906 = VERTEX_POINT('',#439907); +#439907 = CARTESIAN_POINT('',(129.908888,-108.192031,1.585)); +#439908 = LINE('',#439909,#439910); +#439909 = CARTESIAN_POINT('',(129.984524,-108.119504,1.585)); +#439910 = VECTOR('',#439911,1.); +#439911 = DIRECTION('',(-0.721785571396,-0.692116745156,0.)); +#439912 = ORIENTED_EDGE('',*,*,#439913,.T.); +#439913 = EDGE_CURVE('',#439906,#439914,#439916,.T.); +#439914 = VERTEX_POINT('',#439915); +#439915 = CARTESIAN_POINT('',(129.793619,-108.24887,1.585)); +#439916 = LINE('',#439917,#439918); +#439917 = CARTESIAN_POINT('',(129.908888,-108.192031,1.585)); +#439918 = VECTOR('',#439919,1.); +#439919 = DIRECTION('',(-0.896889346494,-0.442255017094,0.)); +#439920 = ORIENTED_EDGE('',*,*,#439921,.T.); +#439921 = EDGE_CURVE('',#439914,#439922,#439924,.T.); +#439922 = VERTEX_POINT('',#439923); +#439923 = CARTESIAN_POINT('',(129.740269,-108.109451,1.585)); +#439924 = CIRCLE('',#439925,7.500005272361E-02); +#439925 = AXIS2_PLACEMENT_3D('',#439926,#439927,#439928); +#439926 = CARTESIAN_POINT('',(129.77380955676,-108.1765333297,1.585)); +#439927 = DIRECTION('',(0.,0.,-1.)); +#439928 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#439929 = ORIENTED_EDGE('',*,*,#439930,.T.); +#439930 = EDGE_CURVE('',#439922,#439931,#439933,.T.); +#439931 = VERTEX_POINT('',#439932); +#439932 = CARTESIAN_POINT('',(129.824621,-108.067275,1.585)); +#439933 = LINE('',#439934,#439935); +#439934 = CARTESIAN_POINT('',(129.740269,-108.109451,1.585)); +#439935 = VECTOR('',#439936,1.); +#439936 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#439937 = ORIENTED_EDGE('',*,*,#439938,.T.); +#439938 = EDGE_CURVE('',#439931,#439939,#439941,.T.); +#439939 = VERTEX_POINT('',#439940); +#439940 = CARTESIAN_POINT('',(129.906,-107.985896,1.585)); +#439941 = LINE('',#439942,#439943); +#439942 = CARTESIAN_POINT('',(129.824621,-108.067275,1.585)); +#439943 = VECTOR('',#439944,1.); +#439944 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#439945 = ORIENTED_EDGE('',*,*,#439946,.T.); +#439946 = EDGE_CURVE('',#439939,#439821,#439947,.T.); +#439947 = LINE('',#439948,#439949); +#439948 = CARTESIAN_POINT('',(129.906,-107.985896,1.585)); +#439949 = VECTOR('',#439950,1.); +#439950 = DIRECTION('',(0.561387006404,0.82755339951,0.)); +#439951 = PLANE('',#439952); +#439952 = AXIS2_PLACEMENT_3D('',#439953,#439954,#439955); +#439953 = CARTESIAN_POINT('',(0.,0.,1.585)); +#439954 = DIRECTION('',(0.,0.,1.)); +#439955 = DIRECTION('',(1.,0.,-0.)); +#439956 = SHELL_BASED_SURFACE_MODEL('',(#439957)); +#439957 = OPEN_SHELL('',(#439958)); +#439958 = ADVANCED_FACE('',(#439959),#440125,.T.); +#439959 = FACE_BOUND('',#439960,.F.); +#439960 = EDGE_LOOP('',(#439961,#439972,#439980,#439988,#439997,#440005, + #440013,#440021,#440029,#440037,#440046,#440054,#440062,#440070, + #440078,#440086,#440094,#440103,#440111,#440119)); +#439961 = ORIENTED_EDGE('',*,*,#439962,.T.); +#439962 = EDGE_CURVE('',#439963,#439965,#439967,.T.); +#439963 = VERTEX_POINT('',#439964); +#439964 = CARTESIAN_POINT('',(136.315474,-107.828459,1.585)); +#439965 = VERTEX_POINT('',#439966); +#439966 = CARTESIAN_POINT('',(136.432142,-107.890819,1.585)); +#439967 = CIRCLE('',#439968,7.500000000002E-02); +#439968 = AXIS2_PLACEMENT_3D('',#439969,#439970,#439971); +#439969 = CARTESIAN_POINT('',(136.357142,-107.8908190655,1.585)); +#439970 = DIRECTION('',(0.,0.,-1.)); +#439971 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#439972 = ORIENTED_EDGE('',*,*,#439973,.T.); +#439973 = EDGE_CURVE('',#439965,#439974,#439976,.T.); +#439974 = VERTEX_POINT('',#439975); +#439975 = CARTESIAN_POINT('',(136.432142,-108.149152,1.585)); +#439976 = LINE('',#439977,#439978); +#439977 = CARTESIAN_POINT('',(136.432142,-107.890819,1.585)); +#439978 = VECTOR('',#439979,1.); +#439979 = DIRECTION('',(0.,-1.,0.)); +#439980 = ORIENTED_EDGE('',*,*,#439981,.T.); +#439981 = EDGE_CURVE('',#439974,#439982,#439984,.T.); +#439982 = VERTEX_POINT('',#439983); +#439983 = CARTESIAN_POINT('',(136.609869,-108.150593,1.585)); +#439984 = LINE('',#439985,#439986); +#439985 = CARTESIAN_POINT('',(136.432142,-108.149152,1.585)); +#439986 = VECTOR('',#439987,1.); +#439987 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#439988 = ORIENTED_EDGE('',*,*,#439989,.T.); +#439989 = EDGE_CURVE('',#439982,#439990,#439992,.T.); +#439990 = VERTEX_POINT('',#439991); +#439991 = CARTESIAN_POINT('',(136.595237,-108.299152,1.585)); +#439992 = CIRCLE('',#439993,7.500006711464E-02); +#439993 = AXIS2_PLACEMENT_3D('',#439994,#439995,#439996); +#439994 = CARTESIAN_POINT('',(136.59523706711,-108.2241519328,1.585)); +#439995 = DIRECTION('',(0.,0.,-1.)); +#439996 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#439997 = ORIENTED_EDGE('',*,*,#439998,.T.); +#439998 = EDGE_CURVE('',#439990,#439999,#440001,.T.); +#439999 = VERTEX_POINT('',#440000); +#440000 = CARTESIAN_POINT('',(136.432142,-108.299152,1.585)); +#440001 = LINE('',#440002,#440003); +#440002 = CARTESIAN_POINT('',(136.595237,-108.299152,1.585)); +#440003 = VECTOR('',#440004,1.); +#440004 = DIRECTION('',(-1.,0.,0.)); +#440005 = ORIENTED_EDGE('',*,*,#440006,.T.); +#440006 = EDGE_CURVE('',#439999,#440007,#440009,.T.); +#440007 = VERTEX_POINT('',#440008); +#440008 = CARTESIAN_POINT('',(136.432142,-108.730256,1.585)); +#440009 = LINE('',#440010,#440011); +#440010 = CARTESIAN_POINT('',(136.432142,-108.299152,1.585)); +#440011 = VECTOR('',#440012,1.); +#440012 = DIRECTION('',(0.,-1.,0.)); +#440013 = ORIENTED_EDGE('',*,*,#440014,.T.); +#440014 = EDGE_CURVE('',#440007,#440015,#440017,.T.); +#440015 = VERTEX_POINT('',#440016); +#440016 = CARTESIAN_POINT('',(136.460662,-108.787298,1.585)); +#440017 = LINE('',#440018,#440019); +#440018 = CARTESIAN_POINT('',(136.432142,-108.730256,1.585)); +#440019 = VECTOR('',#440020,1.); +#440020 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#440021 = ORIENTED_EDGE('',*,*,#440022,.T.); +#440022 = EDGE_CURVE('',#440015,#440023,#440025,.T.); +#440023 = VERTEX_POINT('',#440024); +#440024 = CARTESIAN_POINT('',(136.517704,-108.815819,1.585)); +#440025 = LINE('',#440026,#440027); +#440026 = CARTESIAN_POINT('',(136.460662,-108.787298,1.585)); +#440027 = VECTOR('',#440028,1.); +#440028 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#440029 = ORIENTED_EDGE('',*,*,#440030,.T.); +#440030 = EDGE_CURVE('',#440023,#440031,#440033,.T.); +#440031 = VERTEX_POINT('',#440032); +#440032 = CARTESIAN_POINT('',(136.609869,-108.81726,1.585)); +#440033 = LINE('',#440034,#440035); +#440034 = CARTESIAN_POINT('',(136.517704,-108.815819,1.585)); +#440035 = VECTOR('',#440036,1.); +#440036 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#440037 = ORIENTED_EDGE('',*,*,#440038,.T.); +#440038 = EDGE_CURVE('',#440031,#440039,#440041,.T.); +#440039 = VERTEX_POINT('',#440040); +#440040 = CARTESIAN_POINT('',(136.595237,-108.965819,1.585)); +#440041 = CIRCLE('',#440042,7.500006711464E-02); +#440042 = AXIS2_PLACEMENT_3D('',#440043,#440044,#440045); +#440043 = CARTESIAN_POINT('',(136.59523706711,-108.8908189328,1.585)); +#440044 = DIRECTION('',(0.,0.,-1.)); +#440045 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#440046 = ORIENTED_EDGE('',*,*,#440047,.T.); +#440047 = EDGE_CURVE('',#440039,#440048,#440050,.T.); +#440048 = VERTEX_POINT('',#440049); +#440049 = CARTESIAN_POINT('',(136.480189,-108.963156,1.585)); +#440050 = LINE('',#440051,#440052); +#440051 = CARTESIAN_POINT('',(136.595237,-108.965819,1.585)); +#440052 = VECTOR('',#440053,1.); +#440053 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#440054 = ORIENTED_EDGE('',*,*,#440055,.T.); +#440055 = EDGE_CURVE('',#440048,#440056,#440058,.T.); +#440056 = VERTEX_POINT('',#440057); +#440057 = CARTESIAN_POINT('',(136.358777,-108.90245,1.585)); +#440058 = LINE('',#440059,#440060); +#440059 = CARTESIAN_POINT('',(136.480189,-108.963156,1.585)); +#440060 = VECTOR('',#440061,1.); +#440061 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#440062 = ORIENTED_EDGE('',*,*,#440063,.T.); +#440063 = EDGE_CURVE('',#440056,#440064,#440066,.T.); +#440064 = VERTEX_POINT('',#440065); +#440065 = CARTESIAN_POINT('',(136.337679,-108.876741,1.585)); +#440066 = LINE('',#440067,#440068); +#440067 = CARTESIAN_POINT('',(136.358777,-108.90245,1.585)); +#440068 = VECTOR('',#440069,1.); +#440069 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#440070 = ORIENTED_EDGE('',*,*,#440071,.T.); +#440071 = EDGE_CURVE('',#440064,#440072,#440074,.T.); +#440072 = VERTEX_POINT('',#440073); +#440073 = CARTESIAN_POINT('',(136.283583,-108.762593,1.585)); +#440074 = LINE('',#440075,#440076); +#440075 = CARTESIAN_POINT('',(136.337679,-108.876741,1.585)); +#440076 = VECTOR('',#440077,1.); +#440077 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#440078 = ORIENTED_EDGE('',*,*,#440079,.T.); +#440079 = EDGE_CURVE('',#440072,#440080,#440082,.T.); +#440080 = VERTEX_POINT('',#440081); +#440081 = CARTESIAN_POINT('',(136.282297,-108.349281,1.585)); +#440082 = LINE('',#440083,#440084); +#440083 = CARTESIAN_POINT('',(136.283583,-108.762593,1.585)); +#440084 = VECTOR('',#440085,1.); +#440085 = DIRECTION('',(-3.111435852513E-03,0.999995159472,0.)); +#440086 = ORIENTED_EDGE('',*,*,#440087,.T.); +#440087 = EDGE_CURVE('',#440080,#440088,#440090,.T.); +#440088 = VERTEX_POINT('',#440089); +#440089 = CARTESIAN_POINT('',(136.304264,-108.347118,1.585)); +#440090 = LINE('',#440091,#440092); +#440091 = CARTESIAN_POINT('',(136.282297,-108.349281,1.585)); +#440092 = VECTOR('',#440093,1.); +#440093 = DIRECTION('',(0.99518720399,9.799198444217E-02,0.)); +#440094 = ORIENTED_EDGE('',*,*,#440095,.T.); +#440095 = EDGE_CURVE('',#440088,#440096,#440098,.T.); +#440096 = VERTEX_POINT('',#440097); +#440097 = CARTESIAN_POINT('',(136.282661,-108.050754,1.585)); +#440098 = CIRCLE('',#440099,0.149677260802); +#440099 = AXIS2_PLACEMENT_3D('',#440100,#440101,#440102); +#440100 = CARTESIAN_POINT('',(136.27538025603,-108.2002540774,1.585)); +#440101 = DIRECTION('',(0.,-0.,1.)); +#440102 = DIRECTION('',(0.192973493808,-0.981203969971,-0.)); +#440103 = ORIENTED_EDGE('',*,*,#440104,.T.); +#440104 = EDGE_CURVE('',#440096,#440105,#440107,.T.); +#440105 = VERTEX_POINT('',#440106); +#440106 = CARTESIAN_POINT('',(136.283583,-107.876187,1.585)); +#440107 = LINE('',#440108,#440109); +#440108 = CARTESIAN_POINT('',(136.282661,-108.050754,1.585)); +#440109 = VECTOR('',#440110,1.); +#440110 = DIRECTION('',(5.281566048255E-03,0.999986052433,0.)); +#440111 = ORIENTED_EDGE('',*,*,#440112,.T.); +#440112 = EDGE_CURVE('',#440105,#440113,#440115,.T.); +#440113 = VERTEX_POINT('',#440114); +#440114 = CARTESIAN_POINT('',(136.294782,-107.849151,1.585)); +#440115 = LINE('',#440116,#440117); +#440116 = CARTESIAN_POINT('',(136.283583,-107.876187,1.585)); +#440117 = VECTOR('',#440118,1.); +#440118 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#440119 = ORIENTED_EDGE('',*,*,#440120,.T.); +#440120 = EDGE_CURVE('',#440113,#439963,#440121,.T.); +#440121 = LINE('',#440122,#440123); +#440122 = CARTESIAN_POINT('',(136.294782,-107.849151,1.585)); +#440123 = VECTOR('',#440124,1.); +#440124 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#440125 = PLANE('',#440126); +#440126 = AXIS2_PLACEMENT_3D('',#440127,#440128,#440129); +#440127 = CARTESIAN_POINT('',(0.,0.,1.585)); +#440128 = DIRECTION('',(0.,0.,1.)); +#440129 = DIRECTION('',(1.,0.,-0.)); +#440130 = SHELL_BASED_SURFACE_MODEL('',(#440131)); +#440131 = OPEN_SHELL('',(#440132)); +#440132 = ADVANCED_FACE('',(#440133),#440307,.T.); +#440133 = FACE_BOUND('',#440134,.F.); +#440134 = EDGE_LOOP('',(#440135,#440146,#440154,#440162,#440171,#440179, + #440187,#440195,#440203,#440211,#440220,#440228,#440236,#440244, + #440252,#440260,#440268,#440277,#440285,#440293,#440301)); +#440135 = ORIENTED_EDGE('',*,*,#440136,.T.); +#440136 = EDGE_CURVE('',#440137,#440139,#440141,.T.); +#440137 = VERTEX_POINT('',#440138); +#440138 = CARTESIAN_POINT('',(136.886903,-107.828459,1.585)); +#440139 = VERTEX_POINT('',#440140); +#440140 = CARTESIAN_POINT('',(137.003571,-107.890819,1.585)); +#440141 = CIRCLE('',#440142,7.500000000003E-02); +#440142 = AXIS2_PLACEMENT_3D('',#440143,#440144,#440145); +#440143 = CARTESIAN_POINT('',(136.928571,-107.8908190655,1.585)); +#440144 = DIRECTION('',(0.,0.,-1.)); +#440145 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#440146 = ORIENTED_EDGE('',*,*,#440147,.T.); +#440147 = EDGE_CURVE('',#440139,#440148,#440150,.T.); +#440148 = VERTEX_POINT('',#440149); +#440149 = CARTESIAN_POINT('',(137.003571,-108.149152,1.585)); +#440150 = LINE('',#440151,#440152); +#440151 = CARTESIAN_POINT('',(137.003571,-107.890819,1.585)); +#440152 = VECTOR('',#440153,1.); +#440153 = DIRECTION('',(0.,-1.,0.)); +#440154 = ORIENTED_EDGE('',*,*,#440155,.T.); +#440155 = EDGE_CURVE('',#440148,#440156,#440158,.T.); +#440156 = VERTEX_POINT('',#440157); +#440157 = CARTESIAN_POINT('',(137.181298,-108.150593,1.585)); +#440158 = LINE('',#440159,#440160); +#440159 = CARTESIAN_POINT('',(137.003571,-108.149152,1.585)); +#440160 = VECTOR('',#440161,1.); +#440161 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#440162 = ORIENTED_EDGE('',*,*,#440163,.T.); +#440163 = EDGE_CURVE('',#440156,#440164,#440166,.T.); +#440164 = VERTEX_POINT('',#440165); +#440165 = CARTESIAN_POINT('',(137.166666,-108.299152,1.585)); +#440166 = CIRCLE('',#440167,7.500006711464E-02); +#440167 = AXIS2_PLACEMENT_3D('',#440168,#440169,#440170); +#440168 = CARTESIAN_POINT('',(137.16666606711,-108.2241519328,1.585)); +#440169 = DIRECTION('',(0.,0.,-1.)); +#440170 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440171 = ORIENTED_EDGE('',*,*,#440172,.T.); +#440172 = EDGE_CURVE('',#440164,#440173,#440175,.T.); +#440173 = VERTEX_POINT('',#440174); +#440174 = CARTESIAN_POINT('',(137.003571,-108.299152,1.585)); +#440175 = LINE('',#440176,#440177); +#440176 = CARTESIAN_POINT('',(137.166666,-108.299152,1.585)); +#440177 = VECTOR('',#440178,1.); +#440178 = DIRECTION('',(-1.,0.,0.)); +#440179 = ORIENTED_EDGE('',*,*,#440180,.T.); +#440180 = EDGE_CURVE('',#440173,#440181,#440183,.T.); +#440181 = VERTEX_POINT('',#440182); +#440182 = CARTESIAN_POINT('',(137.003571,-108.730256,1.585)); +#440183 = LINE('',#440184,#440185); +#440184 = CARTESIAN_POINT('',(137.003571,-108.299152,1.585)); +#440185 = VECTOR('',#440186,1.); +#440186 = DIRECTION('',(0.,-1.,0.)); +#440187 = ORIENTED_EDGE('',*,*,#440188,.T.); +#440188 = EDGE_CURVE('',#440181,#440189,#440191,.T.); +#440189 = VERTEX_POINT('',#440190); +#440190 = CARTESIAN_POINT('',(137.032091,-108.787298,1.585)); +#440191 = LINE('',#440192,#440193); +#440192 = CARTESIAN_POINT('',(137.003571,-108.730256,1.585)); +#440193 = VECTOR('',#440194,1.); +#440194 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#440195 = ORIENTED_EDGE('',*,*,#440196,.T.); +#440196 = EDGE_CURVE('',#440189,#440197,#440199,.T.); +#440197 = VERTEX_POINT('',#440198); +#440198 = CARTESIAN_POINT('',(137.089133,-108.815819,1.585)); +#440199 = LINE('',#440200,#440201); +#440200 = CARTESIAN_POINT('',(137.032091,-108.787298,1.585)); +#440201 = VECTOR('',#440202,1.); +#440202 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#440203 = ORIENTED_EDGE('',*,*,#440204,.T.); +#440204 = EDGE_CURVE('',#440197,#440205,#440207,.T.); +#440205 = VERTEX_POINT('',#440206); +#440206 = CARTESIAN_POINT('',(137.181298,-108.81726,1.585)); +#440207 = LINE('',#440208,#440209); +#440208 = CARTESIAN_POINT('',(137.089133,-108.815819,1.585)); +#440209 = VECTOR('',#440210,1.); +#440210 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#440211 = ORIENTED_EDGE('',*,*,#440212,.T.); +#440212 = EDGE_CURVE('',#440205,#440213,#440215,.T.); +#440213 = VERTEX_POINT('',#440214); +#440214 = CARTESIAN_POINT('',(137.166666,-108.965819,1.585)); +#440215 = CIRCLE('',#440216,7.500006711463E-02); +#440216 = AXIS2_PLACEMENT_3D('',#440217,#440218,#440219); +#440217 = CARTESIAN_POINT('',(137.16666606711,-108.8908189328,1.585)); +#440218 = DIRECTION('',(0.,0.,-1.)); +#440219 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440220 = ORIENTED_EDGE('',*,*,#440221,.T.); +#440221 = EDGE_CURVE('',#440213,#440222,#440224,.T.); +#440222 = VERTEX_POINT('',#440223); +#440223 = CARTESIAN_POINT('',(137.051618,-108.963156,1.585)); +#440224 = LINE('',#440225,#440226); +#440225 = CARTESIAN_POINT('',(137.166666,-108.965819,1.585)); +#440226 = VECTOR('',#440227,1.); +#440227 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#440228 = ORIENTED_EDGE('',*,*,#440229,.T.); +#440229 = EDGE_CURVE('',#440222,#440230,#440232,.T.); +#440230 = VERTEX_POINT('',#440231); +#440231 = CARTESIAN_POINT('',(136.930206,-108.90245,1.585)); +#440232 = LINE('',#440233,#440234); +#440233 = CARTESIAN_POINT('',(137.051618,-108.963156,1.585)); +#440234 = VECTOR('',#440235,1.); +#440235 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#440236 = ORIENTED_EDGE('',*,*,#440237,.T.); +#440237 = EDGE_CURVE('',#440230,#440238,#440240,.T.); +#440238 = VERTEX_POINT('',#440239); +#440239 = CARTESIAN_POINT('',(136.909108,-108.876741,1.585)); +#440240 = LINE('',#440241,#440242); +#440241 = CARTESIAN_POINT('',(136.930206,-108.90245,1.585)); +#440242 = VECTOR('',#440243,1.); +#440243 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#440244 = ORIENTED_EDGE('',*,*,#440245,.T.); +#440245 = EDGE_CURVE('',#440238,#440246,#440248,.T.); +#440246 = VERTEX_POINT('',#440247); +#440247 = CARTESIAN_POINT('',(136.855012,-108.762593,1.585)); +#440248 = LINE('',#440249,#440250); +#440249 = CARTESIAN_POINT('',(136.909108,-108.876741,1.585)); +#440250 = VECTOR('',#440251,1.); +#440251 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#440252 = ORIENTED_EDGE('',*,*,#440253,.T.); +#440253 = EDGE_CURVE('',#440246,#440254,#440256,.T.); +#440254 = VERTEX_POINT('',#440255); +#440255 = CARTESIAN_POINT('',(136.853571,-108.299152,1.585)); +#440256 = LINE('',#440257,#440258); +#440257 = CARTESIAN_POINT('',(136.855012,-108.762593,1.585)); +#440258 = VECTOR('',#440259,1.); +#440259 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#440260 = ORIENTED_EDGE('',*,*,#440261,.T.); +#440261 = EDGE_CURVE('',#440254,#440262,#440264,.T.); +#440262 = VERTEX_POINT('',#440263); +#440263 = CARTESIAN_POINT('',(136.771082,-108.297711,1.585)); +#440264 = LINE('',#440265,#440266); +#440265 = CARTESIAN_POINT('',(136.853571,-108.299152,1.585)); +#440266 = VECTOR('',#440267,1.); +#440267 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#440268 = ORIENTED_EDGE('',*,*,#440269,.T.); +#440269 = EDGE_CURVE('',#440262,#440270,#440272,.T.); +#440270 = VERTEX_POINT('',#440271); +#440271 = CARTESIAN_POINT('',(136.785714,-108.149152,1.585)); +#440272 = CIRCLE('',#440273,7.500006711465E-02); +#440273 = AXIS2_PLACEMENT_3D('',#440274,#440275,#440276); +#440274 = CARTESIAN_POINT('',(136.78571393288,-108.2241520671,1.585)); +#440275 = DIRECTION('',(0.,0.,-1.)); +#440276 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#440277 = ORIENTED_EDGE('',*,*,#440278,.T.); +#440278 = EDGE_CURVE('',#440270,#440279,#440281,.T.); +#440279 = VERTEX_POINT('',#440280); +#440280 = CARTESIAN_POINT('',(136.853571,-108.149152,1.585)); +#440281 = LINE('',#440282,#440283); +#440282 = CARTESIAN_POINT('',(136.785714,-108.149152,1.585)); +#440283 = VECTOR('',#440284,1.); +#440284 = DIRECTION('',(1.,0.,0.)); +#440285 = ORIENTED_EDGE('',*,*,#440286,.T.); +#440286 = EDGE_CURVE('',#440279,#440287,#440289,.T.); +#440287 = VERTEX_POINT('',#440288); +#440288 = CARTESIAN_POINT('',(136.855012,-107.876187,1.585)); +#440289 = LINE('',#440290,#440291); +#440290 = CARTESIAN_POINT('',(136.853571,-108.149152,1.585)); +#440291 = VECTOR('',#440292,1.); +#440292 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#440293 = ORIENTED_EDGE('',*,*,#440294,.T.); +#440294 = EDGE_CURVE('',#440287,#440295,#440297,.T.); +#440295 = VERTEX_POINT('',#440296); +#440296 = CARTESIAN_POINT('',(136.866211,-107.849151,1.585)); +#440297 = LINE('',#440298,#440299); +#440298 = CARTESIAN_POINT('',(136.855012,-107.876187,1.585)); +#440299 = VECTOR('',#440300,1.); +#440300 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#440301 = ORIENTED_EDGE('',*,*,#440302,.T.); +#440302 = EDGE_CURVE('',#440295,#440137,#440303,.T.); +#440303 = LINE('',#440304,#440305); +#440304 = CARTESIAN_POINT('',(136.866211,-107.849151,1.585)); +#440305 = VECTOR('',#440306,1.); +#440306 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#440307 = PLANE('',#440308); +#440308 = AXIS2_PLACEMENT_3D('',#440309,#440310,#440311); +#440309 = CARTESIAN_POINT('',(0.,0.,1.585)); +#440310 = DIRECTION('',(0.,0.,1.)); +#440311 = DIRECTION('',(1.,0.,-0.)); +#440312 = SHELL_BASED_SURFACE_MODEL('',(#440313)); +#440313 = OPEN_SHELL('',(#440314)); +#440314 = ADVANCED_FACE('',(#440315),#440474,.T.); +#440315 = FACE_BOUND('',#440316,.F.); +#440316 = EDGE_LOOP('',(#440317,#440328,#440336,#440344,#440352,#440360, + #440368,#440376,#440385,#440393,#440402,#440410,#440418,#440426, + #440435,#440443,#440451,#440459,#440468)); +#440317 = ORIENTED_EDGE('',*,*,#440318,.T.); +#440318 = EDGE_CURVE('',#440319,#440321,#440323,.T.); +#440319 = VERTEX_POINT('',#440320); +#440320 = CARTESIAN_POINT('',(140.037888,-107.871356,1.585)); +#440321 = VERTEX_POINT('',#440322); +#440322 = CARTESIAN_POINT('',(140.547283,-107.880686,1.585)); +#440323 = CIRCLE('',#440324,0.450326844012); +#440324 = AXIS2_PLACEMENT_3D('',#440325,#440326,#440327); +#440325 = CARTESIAN_POINT('',(140.2857850301,-108.2473098919,1.585)); +#440326 = DIRECTION('',(0.,0.,-1.)); +#440327 = DIRECTION('',(-0.550482462684,0.834846727416,0.)); +#440328 = ORIENTED_EDGE('',*,*,#440329,.T.); +#440329 = EDGE_CURVE('',#440321,#440330,#440332,.T.); +#440330 = VERTEX_POINT('',#440331); +#440331 = CARTESIAN_POINT('',(140.610736,-107.946216,1.585)); +#440332 = LINE('',#440333,#440334); +#440333 = CARTESIAN_POINT('',(140.547283,-107.880686,1.585)); +#440334 = VECTOR('',#440335,1.); +#440335 = DIRECTION('',(0.695630129574,-0.718400113328,0.)); +#440336 = ORIENTED_EDGE('',*,*,#440337,.T.); +#440337 = EDGE_CURVE('',#440330,#440338,#440340,.T.); +#440338 = VERTEX_POINT('',#440339); +#440339 = CARTESIAN_POINT('',(140.668797,-108.066663,1.585)); +#440340 = LINE('',#440341,#440342); +#440341 = CARTESIAN_POINT('',(140.610736,-107.946216,1.585)); +#440342 = VECTOR('',#440343,1.); +#440343 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#440344 = ORIENTED_EDGE('',*,*,#440345,.T.); +#440345 = EDGE_CURVE('',#440338,#440346,#440348,.T.); +#440346 = VERTEX_POINT('',#440347); +#440347 = CARTESIAN_POINT('',(140.668038,-108.192995,1.585)); +#440348 = LINE('',#440349,#440350); +#440349 = CARTESIAN_POINT('',(140.668797,-108.066663,1.585)); +#440350 = VECTOR('',#440351,1.); +#440351 = DIRECTION('',(-6.007870547659E-03,-0.999981952583,0.)); +#440352 = ORIENTED_EDGE('',*,*,#440353,.T.); +#440353 = EDGE_CURVE('',#440346,#440354,#440356,.T.); +#440354 = VERTEX_POINT('',#440355); +#440355 = CARTESIAN_POINT('',(140.60998,-108.361058,1.585)); +#440356 = LINE('',#440357,#440358); +#440357 = CARTESIAN_POINT('',(140.668038,-108.192995,1.585)); +#440358 = VECTOR('',#440359,1.); +#440359 = DIRECTION('',(-0.326519613327,-0.945190426376,0.)); +#440360 = ORIENTED_EDGE('',*,*,#440361,.T.); +#440361 = EDGE_CURVE('',#440354,#440362,#440364,.T.); +#440362 = VERTEX_POINT('',#440363); +#440363 = CARTESIAN_POINT('',(140.157257,-108.815819,1.585)); +#440364 = LINE('',#440365,#440366); +#440365 = CARTESIAN_POINT('',(140.60998,-108.361058,1.585)); +#440366 = VECTOR('',#440367,1.); +#440367 = DIRECTION('',(-0.705517003129,-0.708692992978,0.)); +#440368 = ORIENTED_EDGE('',*,*,#440369,.T.); +#440369 = EDGE_CURVE('',#440362,#440370,#440372,.T.); +#440370 = VERTEX_POINT('',#440371); +#440371 = CARTESIAN_POINT('',(140.60987,-108.81726,1.585)); +#440372 = LINE('',#440373,#440374); +#440373 = CARTESIAN_POINT('',(140.157257,-108.815819,1.585)); +#440374 = VECTOR('',#440375,1.); +#440375 = DIRECTION('',(0.999994931953,-3.183719197072E-03,0.)); +#440376 = ORIENTED_EDGE('',*,*,#440377,.T.); +#440377 = EDGE_CURVE('',#440370,#440378,#440380,.T.); +#440378 = VERTEX_POINT('',#440379); +#440379 = CARTESIAN_POINT('',(140.595238,-108.965819,1.585)); +#440380 = CIRCLE('',#440381,7.500006711462E-02); +#440381 = AXIS2_PLACEMENT_3D('',#440382,#440383,#440384); +#440382 = CARTESIAN_POINT('',(140.59523806711,-108.8908189328,1.585)); +#440383 = DIRECTION('',(0.,0.,-1.)); +#440384 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440385 = ORIENTED_EDGE('',*,*,#440386,.T.); +#440386 = EDGE_CURVE('',#440378,#440387,#440389,.T.); +#440387 = VERTEX_POINT('',#440388); +#440388 = CARTESIAN_POINT('',(139.961559,-108.964378,1.585)); +#440389 = LINE('',#440390,#440391); +#440390 = CARTESIAN_POINT('',(140.595238,-108.965819,1.585)); +#440391 = VECTOR('',#440392,1.); +#440392 = DIRECTION('',(-0.999997414422,2.274016140951E-03,0.)); +#440393 = ORIENTED_EDGE('',*,*,#440394,.T.); +#440394 = EDGE_CURVE('',#440387,#440395,#440397,.T.); +#440395 = VERTEX_POINT('',#440396); +#440396 = CARTESIAN_POINT('',(139.923158,-108.837786,1.585)); +#440397 = CIRCLE('',#440398,7.500021013111E-02); +#440398 = AXIS2_PLACEMENT_3D('',#440399,#440400,#440401); +#440399 = CARTESIAN_POINT('',(139.9761913167,-108.8908189976,1.585)); +#440400 = DIRECTION('',(0.,0.,-1.)); +#440401 = DIRECTION('',(-0.195097009436,-0.980783950169,-0.)); +#440402 = ORIENTED_EDGE('',*,*,#440403,.T.); +#440403 = EDGE_CURVE('',#440395,#440404,#440406,.T.); +#440404 = VERTEX_POINT('',#440405); +#440405 = CARTESIAN_POINT('',(140.482066,-108.278876,1.585)); +#440406 = LINE('',#440407,#440408); +#440407 = CARTESIAN_POINT('',(139.923158,-108.837786,1.585)); +#440408 = VECTOR('',#440409,1.); +#440409 = DIRECTION('',(0.70710551603,0.707108046341,0.)); +#440410 = ORIENTED_EDGE('',*,*,#440411,.T.); +#440411 = EDGE_CURVE('',#440404,#440412,#440414,.T.); +#440412 = VERTEX_POINT('',#440413); +#440413 = CARTESIAN_POINT('',(140.520238,-108.164363,1.585)); +#440414 = LINE('',#440415,#440416); +#440415 = CARTESIAN_POINT('',(140.482066,-108.278876,1.585)); +#440416 = VECTOR('',#440417,1.); +#440417 = DIRECTION('',(0.31623522204,0.948680812677,0.)); +#440418 = ORIENTED_EDGE('',*,*,#440419,.T.); +#440419 = EDGE_CURVE('',#440412,#440420,#440422,.T.); +#440420 = VERTEX_POINT('',#440421); +#440421 = CARTESIAN_POINT('',(140.520238,-108.099,1.585)); +#440422 = LINE('',#440423,#440424); +#440423 = CARTESIAN_POINT('',(140.520238,-108.164363,1.585)); +#440424 = VECTOR('',#440425,1.); +#440425 = DIRECTION('',(0.,1.,0.)); +#440426 = ORIENTED_EDGE('',*,*,#440427,.T.); +#440427 = EDGE_CURVE('',#440420,#440428,#440430,.T.); +#440428 = VERTEX_POINT('',#440429); +#440429 = CARTESIAN_POINT('',(140.387057,-107.965819,1.585)); +#440430 = CIRCLE('',#440431,0.18686440374); +#440431 = AXIS2_PLACEMENT_3D('',#440432,#440433,#440434); +#440432 = CARTESIAN_POINT('',(140.339521,-108.146536,1.585)); +#440433 = DIRECTION('',(0.,0.,1.)); +#440434 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#440435 = ORIENTED_EDGE('',*,*,#440436,.T.); +#440436 = EDGE_CURVE('',#440428,#440437,#440439,.T.); +#440437 = VERTEX_POINT('',#440438); +#440438 = CARTESIAN_POINT('',(140.184372,-107.965819,1.585)); +#440439 = LINE('',#440440,#440441); +#440440 = CARTESIAN_POINT('',(140.387057,-107.965819,1.585)); +#440441 = VECTOR('',#440442,1.); +#440442 = DIRECTION('',(-1.,0.,0.)); +#440443 = ORIENTED_EDGE('',*,*,#440444,.T.); +#440444 = EDGE_CURVE('',#440437,#440445,#440447,.T.); +#440445 = VERTEX_POINT('',#440446); +#440446 = CARTESIAN_POINT('',(140.115856,-108.000077,1.585)); +#440447 = LINE('',#440448,#440449); +#440448 = CARTESIAN_POINT('',(140.184372,-107.965819,1.585)); +#440449 = VECTOR('',#440450,1.); +#440450 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#440451 = ORIENTED_EDGE('',*,*,#440452,.T.); +#440452 = EDGE_CURVE('',#440445,#440453,#440455,.T.); +#440453 = VERTEX_POINT('',#440454); +#440454 = CARTESIAN_POINT('',(140.065478,-108.048417,1.585)); +#440455 = LINE('',#440456,#440457); +#440456 = CARTESIAN_POINT('',(140.115856,-108.000077,1.585)); +#440457 = VECTOR('',#440458,1.); +#440458 = DIRECTION('',(-0.721551016594,-0.692361271629,0.)); +#440459 = ORIENTED_EDGE('',*,*,#440460,.T.); +#440460 = EDGE_CURVE('',#440453,#440461,#440463,.T.); +#440461 = VERTEX_POINT('',#440462); +#440462 = CARTESIAN_POINT('',(139.970777,-107.933024,1.585)); +#440463 = CIRCLE('',#440464,7.499996838528E-02); +#440464 = AXIS2_PLACEMENT_3D('',#440465,#440466,#440467); +#440465 = CARTESIAN_POINT('',(140.02381,-107.9860569724,1.585)); +#440466 = DIRECTION('',(0.,0.,-1.)); +#440467 = DIRECTION('',(0.555573567524,-0.831467384248,0.)); +#440468 = ORIENTED_EDGE('',*,*,#440469,.T.); +#440469 = EDGE_CURVE('',#440461,#440319,#440470,.T.); +#440470 = LINE('',#440471,#440472); +#440471 = CARTESIAN_POINT('',(139.970777,-107.933024,1.585)); +#440472 = VECTOR('',#440473,1.); +#440473 = DIRECTION('',(0.736336089652,0.676615964248,0.)); +#440474 = PLANE('',#440475); +#440475 = AXIS2_PLACEMENT_3D('',#440476,#440477,#440478); +#440476 = CARTESIAN_POINT('',(0.,0.,1.585)); +#440477 = DIRECTION('',(0.,0.,1.)); +#440478 = DIRECTION('',(1.,0.,-0.)); +#440479 = SHELL_BASED_SURFACE_MODEL('',(#440480)); +#440480 = OPEN_SHELL('',(#440481)); +#440481 = ADVANCED_FACE('',(#440482),#440656,.T.); +#440482 = FACE_BOUND('',#440483,.F.); +#440483 = EDGE_LOOP('',(#440484,#440495,#440503,#440511,#440520,#440528, + #440536,#440544,#440552,#440560,#440569,#440577,#440585,#440593, + #440601,#440609,#440617,#440626,#440634,#440642,#440650)); +#440484 = ORIENTED_EDGE('',*,*,#440485,.T.); +#440485 = EDGE_CURVE('',#440486,#440488,#440490,.T.); +#440486 = VERTEX_POINT('',#440487); +#440487 = CARTESIAN_POINT('',(146.565474,-107.828459,1.585)); +#440488 = VERTEX_POINT('',#440489); +#440489 = CARTESIAN_POINT('',(146.682142,-107.890819,1.585)); +#440490 = CIRCLE('',#440491,7.500000000002E-02); +#440491 = AXIS2_PLACEMENT_3D('',#440492,#440493,#440494); +#440492 = CARTESIAN_POINT('',(146.607142,-107.8908190655,1.585)); +#440493 = DIRECTION('',(0.,0.,-1.)); +#440494 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#440495 = ORIENTED_EDGE('',*,*,#440496,.T.); +#440496 = EDGE_CURVE('',#440488,#440497,#440499,.T.); +#440497 = VERTEX_POINT('',#440498); +#440498 = CARTESIAN_POINT('',(146.682142,-108.149152,1.585)); +#440499 = LINE('',#440500,#440501); +#440500 = CARTESIAN_POINT('',(146.682142,-107.890819,1.585)); +#440501 = VECTOR('',#440502,1.); +#440502 = DIRECTION('',(0.,-1.,0.)); +#440503 = ORIENTED_EDGE('',*,*,#440504,.T.); +#440504 = EDGE_CURVE('',#440497,#440505,#440507,.T.); +#440505 = VERTEX_POINT('',#440506); +#440506 = CARTESIAN_POINT('',(146.859869,-108.150593,1.585)); +#440507 = LINE('',#440508,#440509); +#440508 = CARTESIAN_POINT('',(146.682142,-108.149152,1.585)); +#440509 = VECTOR('',#440510,1.); +#440510 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#440511 = ORIENTED_EDGE('',*,*,#440512,.T.); +#440512 = EDGE_CURVE('',#440505,#440513,#440515,.T.); +#440513 = VERTEX_POINT('',#440514); +#440514 = CARTESIAN_POINT('',(146.845237,-108.299152,1.585)); +#440515 = CIRCLE('',#440516,7.500006711464E-02); +#440516 = AXIS2_PLACEMENT_3D('',#440517,#440518,#440519); +#440517 = CARTESIAN_POINT('',(146.84523706711,-108.2241519328,1.585)); +#440518 = DIRECTION('',(0.,0.,-1.)); +#440519 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440520 = ORIENTED_EDGE('',*,*,#440521,.T.); +#440521 = EDGE_CURVE('',#440513,#440522,#440524,.T.); +#440522 = VERTEX_POINT('',#440523); +#440523 = CARTESIAN_POINT('',(146.682142,-108.299152,1.585)); +#440524 = LINE('',#440525,#440526); +#440525 = CARTESIAN_POINT('',(146.845237,-108.299152,1.585)); +#440526 = VECTOR('',#440527,1.); +#440527 = DIRECTION('',(-1.,0.,0.)); +#440528 = ORIENTED_EDGE('',*,*,#440529,.T.); +#440529 = EDGE_CURVE('',#440522,#440530,#440532,.T.); +#440530 = VERTEX_POINT('',#440531); +#440531 = CARTESIAN_POINT('',(146.682142,-108.730256,1.585)); +#440532 = LINE('',#440533,#440534); +#440533 = CARTESIAN_POINT('',(146.682142,-108.299152,1.585)); +#440534 = VECTOR('',#440535,1.); +#440535 = DIRECTION('',(0.,-1.,0.)); +#440536 = ORIENTED_EDGE('',*,*,#440537,.T.); +#440537 = EDGE_CURVE('',#440530,#440538,#440540,.T.); +#440538 = VERTEX_POINT('',#440539); +#440539 = CARTESIAN_POINT('',(146.710662,-108.787298,1.585)); +#440540 = LINE('',#440541,#440542); +#440541 = CARTESIAN_POINT('',(146.682142,-108.730256,1.585)); +#440542 = VECTOR('',#440543,1.); +#440543 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#440544 = ORIENTED_EDGE('',*,*,#440545,.T.); +#440545 = EDGE_CURVE('',#440538,#440546,#440548,.T.); +#440546 = VERTEX_POINT('',#440547); +#440547 = CARTESIAN_POINT('',(146.767704,-108.815819,1.585)); +#440548 = LINE('',#440549,#440550); +#440549 = CARTESIAN_POINT('',(146.710662,-108.787298,1.585)); +#440550 = VECTOR('',#440551,1.); +#440551 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#440552 = ORIENTED_EDGE('',*,*,#440553,.T.); +#440553 = EDGE_CURVE('',#440546,#440554,#440556,.T.); +#440554 = VERTEX_POINT('',#440555); +#440555 = CARTESIAN_POINT('',(146.859869,-108.81726,1.585)); +#440556 = LINE('',#440557,#440558); +#440557 = CARTESIAN_POINT('',(146.767704,-108.815819,1.585)); +#440558 = VECTOR('',#440559,1.); +#440559 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#440560 = ORIENTED_EDGE('',*,*,#440561,.T.); +#440561 = EDGE_CURVE('',#440554,#440562,#440564,.T.); +#440562 = VERTEX_POINT('',#440563); +#440563 = CARTESIAN_POINT('',(146.845237,-108.965819,1.585)); +#440564 = CIRCLE('',#440565,7.500006711464E-02); +#440565 = AXIS2_PLACEMENT_3D('',#440566,#440567,#440568); +#440566 = CARTESIAN_POINT('',(146.84523706711,-108.8908189328,1.585)); +#440567 = DIRECTION('',(0.,0.,-1.)); +#440568 = DIRECTION('',(0.195092263892,0.980784894138,0.)); +#440569 = ORIENTED_EDGE('',*,*,#440570,.T.); +#440570 = EDGE_CURVE('',#440562,#440571,#440573,.T.); +#440571 = VERTEX_POINT('',#440572); +#440572 = CARTESIAN_POINT('',(146.730189,-108.963156,1.585)); +#440573 = LINE('',#440574,#440575); +#440574 = CARTESIAN_POINT('',(146.845237,-108.965819,1.585)); +#440575 = VECTOR('',#440576,1.); +#440576 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#440577 = ORIENTED_EDGE('',*,*,#440578,.T.); +#440578 = EDGE_CURVE('',#440571,#440579,#440581,.T.); +#440579 = VERTEX_POINT('',#440580); +#440580 = CARTESIAN_POINT('',(146.608777,-108.90245,1.585)); +#440581 = LINE('',#440582,#440583); +#440582 = CARTESIAN_POINT('',(146.730189,-108.963156,1.585)); +#440583 = VECTOR('',#440584,1.); +#440584 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#440585 = ORIENTED_EDGE('',*,*,#440586,.T.); +#440586 = EDGE_CURVE('',#440579,#440587,#440589,.T.); +#440587 = VERTEX_POINT('',#440588); +#440588 = CARTESIAN_POINT('',(146.587679,-108.876741,1.585)); +#440589 = LINE('',#440590,#440591); +#440590 = CARTESIAN_POINT('',(146.608777,-108.90245,1.585)); +#440591 = VECTOR('',#440592,1.); +#440592 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#440593 = ORIENTED_EDGE('',*,*,#440594,.T.); +#440594 = EDGE_CURVE('',#440587,#440595,#440597,.T.); +#440595 = VERTEX_POINT('',#440596); +#440596 = CARTESIAN_POINT('',(146.533583,-108.762593,1.585)); +#440597 = LINE('',#440598,#440599); +#440598 = CARTESIAN_POINT('',(146.587679,-108.876741,1.585)); +#440599 = VECTOR('',#440600,1.); +#440600 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#440601 = ORIENTED_EDGE('',*,*,#440602,.T.); +#440602 = EDGE_CURVE('',#440595,#440603,#440605,.T.); +#440603 = VERTEX_POINT('',#440604); +#440604 = CARTESIAN_POINT('',(146.532142,-108.299152,1.585)); +#440605 = LINE('',#440606,#440607); +#440606 = CARTESIAN_POINT('',(146.533583,-108.762593,1.585)); +#440607 = VECTOR('',#440608,1.); +#440608 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#440609 = ORIENTED_EDGE('',*,*,#440610,.T.); +#440610 = EDGE_CURVE('',#440603,#440611,#440613,.T.); +#440611 = VERTEX_POINT('',#440612); +#440612 = CARTESIAN_POINT('',(146.449653,-108.297711,1.585)); +#440613 = LINE('',#440614,#440615); +#440614 = CARTESIAN_POINT('',(146.532142,-108.299152,1.585)); +#440615 = VECTOR('',#440616,1.); +#440616 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#440617 = ORIENTED_EDGE('',*,*,#440618,.T.); +#440618 = EDGE_CURVE('',#440611,#440619,#440621,.T.); +#440619 = VERTEX_POINT('',#440620); +#440620 = CARTESIAN_POINT('',(146.464285,-108.149152,1.585)); +#440621 = CIRCLE('',#440622,7.500006711464E-02); +#440622 = AXIS2_PLACEMENT_3D('',#440623,#440624,#440625); +#440623 = CARTESIAN_POINT('',(146.46428493288,-108.2241520671,1.585)); +#440624 = DIRECTION('',(0.,0.,-1.)); +#440625 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#440626 = ORIENTED_EDGE('',*,*,#440627,.T.); +#440627 = EDGE_CURVE('',#440619,#440628,#440630,.T.); +#440628 = VERTEX_POINT('',#440629); +#440629 = CARTESIAN_POINT('',(146.532142,-108.149152,1.585)); +#440630 = LINE('',#440631,#440632); +#440631 = CARTESIAN_POINT('',(146.464285,-108.149152,1.585)); +#440632 = VECTOR('',#440633,1.); +#440633 = DIRECTION('',(1.,0.,0.)); +#440634 = ORIENTED_EDGE('',*,*,#440635,.T.); +#440635 = EDGE_CURVE('',#440628,#440636,#440638,.T.); +#440636 = VERTEX_POINT('',#440637); +#440637 = CARTESIAN_POINT('',(146.533583,-107.876187,1.585)); +#440638 = LINE('',#440639,#440640); +#440639 = CARTESIAN_POINT('',(146.532142,-108.149152,1.585)); +#440640 = VECTOR('',#440641,1.); +#440641 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#440642 = ORIENTED_EDGE('',*,*,#440643,.T.); +#440643 = EDGE_CURVE('',#440636,#440644,#440646,.T.); +#440644 = VERTEX_POINT('',#440645); +#440645 = CARTESIAN_POINT('',(146.544782,-107.849151,1.585)); +#440646 = LINE('',#440647,#440648); +#440647 = CARTESIAN_POINT('',(146.533583,-107.876187,1.585)); +#440648 = VECTOR('',#440649,1.); +#440649 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#440650 = ORIENTED_EDGE('',*,*,#440651,.T.); +#440651 = EDGE_CURVE('',#440644,#440486,#440652,.T.); +#440652 = LINE('',#440653,#440654); +#440653 = CARTESIAN_POINT('',(146.544782,-107.849151,1.585)); +#440654 = VECTOR('',#440655,1.); +#440655 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#440656 = PLANE('',#440657); +#440657 = AXIS2_PLACEMENT_3D('',#440658,#440659,#440660); +#440658 = CARTESIAN_POINT('',(0.,0.,1.585)); +#440659 = DIRECTION('',(0.,0.,1.)); +#440660 = DIRECTION('',(1.,0.,-0.)); +#440661 = SHELL_BASED_SURFACE_MODEL('',(#440662)); +#440662 = OPEN_SHELL('',(#440663)); +#440663 = ADVANCED_FACE('',(#440664),#440838,.T.); +#440664 = FACE_BOUND('',#440665,.F.); +#440665 = EDGE_LOOP('',(#440666,#440677,#440685,#440693,#440702,#440710, + #440718,#440726,#440734,#440742,#440751,#440759,#440767,#440775, + #440783,#440791,#440799,#440808,#440816,#440824,#440832)); +#440666 = ORIENTED_EDGE('',*,*,#440667,.T.); +#440667 = EDGE_CURVE('',#440668,#440670,#440672,.T.); +#440668 = VERTEX_POINT('',#440669); +#440669 = CARTESIAN_POINT('',(147.136903,-107.828459,1.585)); +#440670 = VERTEX_POINT('',#440671); +#440671 = CARTESIAN_POINT('',(147.253571,-107.890819,1.585)); +#440672 = CIRCLE('',#440673,7.500000000003E-02); +#440673 = AXIS2_PLACEMENT_3D('',#440674,#440675,#440676); +#440674 = CARTESIAN_POINT('',(147.178571,-107.8908190655,1.585)); +#440675 = DIRECTION('',(0.,0.,-1.)); +#440676 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#440677 = ORIENTED_EDGE('',*,*,#440678,.T.); +#440678 = EDGE_CURVE('',#440670,#440679,#440681,.T.); +#440679 = VERTEX_POINT('',#440680); +#440680 = CARTESIAN_POINT('',(147.253571,-108.149152,1.585)); +#440681 = LINE('',#440682,#440683); +#440682 = CARTESIAN_POINT('',(147.253571,-107.890819,1.585)); +#440683 = VECTOR('',#440684,1.); +#440684 = DIRECTION('',(0.,-1.,0.)); +#440685 = ORIENTED_EDGE('',*,*,#440686,.T.); +#440686 = EDGE_CURVE('',#440679,#440687,#440689,.T.); +#440687 = VERTEX_POINT('',#440688); +#440688 = CARTESIAN_POINT('',(147.431298,-108.150593,1.585)); +#440689 = LINE('',#440690,#440691); +#440690 = CARTESIAN_POINT('',(147.253571,-108.149152,1.585)); +#440691 = VECTOR('',#440692,1.); +#440692 = DIRECTION('',(0.999967132268,-8.107674340974E-03,0.)); +#440693 = ORIENTED_EDGE('',*,*,#440694,.T.); +#440694 = EDGE_CURVE('',#440687,#440695,#440697,.T.); +#440695 = VERTEX_POINT('',#440696); +#440696 = CARTESIAN_POINT('',(147.416666,-108.299152,1.585)); +#440697 = CIRCLE('',#440698,7.500006711464E-02); +#440698 = AXIS2_PLACEMENT_3D('',#440699,#440700,#440701); +#440699 = CARTESIAN_POINT('',(147.41666606711,-108.2241519328,1.585)); +#440700 = DIRECTION('',(0.,0.,-1.)); +#440701 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440702 = ORIENTED_EDGE('',*,*,#440703,.T.); +#440703 = EDGE_CURVE('',#440695,#440704,#440706,.T.); +#440704 = VERTEX_POINT('',#440705); +#440705 = CARTESIAN_POINT('',(147.253571,-108.299152,1.585)); +#440706 = LINE('',#440707,#440708); +#440707 = CARTESIAN_POINT('',(147.416666,-108.299152,1.585)); +#440708 = VECTOR('',#440709,1.); +#440709 = DIRECTION('',(-1.,0.,0.)); +#440710 = ORIENTED_EDGE('',*,*,#440711,.T.); +#440711 = EDGE_CURVE('',#440704,#440712,#440714,.T.); +#440712 = VERTEX_POINT('',#440713); +#440713 = CARTESIAN_POINT('',(147.253571,-108.730256,1.585)); +#440714 = LINE('',#440715,#440716); +#440715 = CARTESIAN_POINT('',(147.253571,-108.299152,1.585)); +#440716 = VECTOR('',#440717,1.); +#440717 = DIRECTION('',(0.,-1.,0.)); +#440718 = ORIENTED_EDGE('',*,*,#440719,.T.); +#440719 = EDGE_CURVE('',#440712,#440720,#440722,.T.); +#440720 = VERTEX_POINT('',#440721); +#440721 = CARTESIAN_POINT('',(147.282091,-108.787298,1.585)); +#440722 = LINE('',#440723,#440724); +#440723 = CARTESIAN_POINT('',(147.253571,-108.730256,1.585)); +#440724 = VECTOR('',#440725,1.); +#440725 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#440726 = ORIENTED_EDGE('',*,*,#440727,.T.); +#440727 = EDGE_CURVE('',#440720,#440728,#440730,.T.); +#440728 = VERTEX_POINT('',#440729); +#440729 = CARTESIAN_POINT('',(147.339133,-108.815819,1.585)); +#440730 = LINE('',#440731,#440732); +#440731 = CARTESIAN_POINT('',(147.282091,-108.787298,1.585)); +#440732 = VECTOR('',#440733,1.); +#440733 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#440734 = ORIENTED_EDGE('',*,*,#440735,.T.); +#440735 = EDGE_CURVE('',#440728,#440736,#440738,.T.); +#440736 = VERTEX_POINT('',#440737); +#440737 = CARTESIAN_POINT('',(147.431298,-108.81726,1.585)); +#440738 = LINE('',#440739,#440740); +#440739 = CARTESIAN_POINT('',(147.339133,-108.815819,1.585)); +#440740 = VECTOR('',#440741,1.); +#440741 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#440742 = ORIENTED_EDGE('',*,*,#440743,.T.); +#440743 = EDGE_CURVE('',#440736,#440744,#440746,.T.); +#440744 = VERTEX_POINT('',#440745); +#440745 = CARTESIAN_POINT('',(147.416666,-108.965819,1.585)); +#440746 = CIRCLE('',#440747,7.500006711463E-02); +#440747 = AXIS2_PLACEMENT_3D('',#440748,#440749,#440750); +#440748 = CARTESIAN_POINT('',(147.41666606711,-108.8908189328,1.585)); +#440749 = DIRECTION('',(0.,0.,-1.)); +#440750 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#440751 = ORIENTED_EDGE('',*,*,#440752,.T.); +#440752 = EDGE_CURVE('',#440744,#440753,#440755,.T.); +#440753 = VERTEX_POINT('',#440754); +#440754 = CARTESIAN_POINT('',(147.301618,-108.963156,1.585)); +#440755 = LINE('',#440756,#440757); +#440756 = CARTESIAN_POINT('',(147.416666,-108.965819,1.585)); +#440757 = VECTOR('',#440758,1.); +#440758 = DIRECTION('',(-0.999732219024,2.314066215197E-02,0.)); +#440759 = ORIENTED_EDGE('',*,*,#440760,.T.); +#440760 = EDGE_CURVE('',#440753,#440761,#440763,.T.); +#440761 = VERTEX_POINT('',#440762); +#440762 = CARTESIAN_POINT('',(147.180206,-108.90245,1.585)); +#440763 = LINE('',#440764,#440765); +#440764 = CARTESIAN_POINT('',(147.301618,-108.963156,1.585)); +#440765 = VECTOR('',#440766,1.); +#440766 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#440767 = ORIENTED_EDGE('',*,*,#440768,.T.); +#440768 = EDGE_CURVE('',#440761,#440769,#440771,.T.); +#440769 = VERTEX_POINT('',#440770); +#440770 = CARTESIAN_POINT('',(147.159108,-108.876741,1.585)); +#440771 = LINE('',#440772,#440773); +#440772 = CARTESIAN_POINT('',(147.180206,-108.90245,1.585)); +#440773 = VECTOR('',#440774,1.); +#440774 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#440775 = ORIENTED_EDGE('',*,*,#440776,.T.); +#440776 = EDGE_CURVE('',#440769,#440777,#440779,.T.); +#440777 = VERTEX_POINT('',#440778); +#440778 = CARTESIAN_POINT('',(147.105012,-108.762593,1.585)); +#440779 = LINE('',#440780,#440781); +#440780 = CARTESIAN_POINT('',(147.159108,-108.876741,1.585)); +#440781 = VECTOR('',#440782,1.); +#440782 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#440783 = ORIENTED_EDGE('',*,*,#440784,.T.); +#440784 = EDGE_CURVE('',#440777,#440785,#440787,.T.); +#440785 = VERTEX_POINT('',#440786); +#440786 = CARTESIAN_POINT('',(147.103571,-108.299152,1.585)); +#440787 = LINE('',#440788,#440789); +#440788 = CARTESIAN_POINT('',(147.105012,-108.762593,1.585)); +#440789 = VECTOR('',#440790,1.); +#440790 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#440791 = ORIENTED_EDGE('',*,*,#440792,.T.); +#440792 = EDGE_CURVE('',#440785,#440793,#440795,.T.); +#440793 = VERTEX_POINT('',#440794); +#440794 = CARTESIAN_POINT('',(147.021082,-108.297711,1.585)); +#440795 = LINE('',#440796,#440797); +#440796 = CARTESIAN_POINT('',(147.103571,-108.299152,1.585)); +#440797 = VECTOR('',#440798,1.); +#440798 = DIRECTION('',(-0.999847452005,1.746633100583E-02,0.)); +#440799 = ORIENTED_EDGE('',*,*,#440800,.T.); +#440800 = EDGE_CURVE('',#440793,#440801,#440803,.T.); +#440801 = VERTEX_POINT('',#440802); +#440802 = CARTESIAN_POINT('',(147.035714,-108.149152,1.585)); +#440803 = CIRCLE('',#440804,7.500006711465E-02); +#440804 = AXIS2_PLACEMENT_3D('',#440805,#440806,#440807); +#440805 = CARTESIAN_POINT('',(147.03571393288,-108.2241520671,1.585)); +#440806 = DIRECTION('',(0.,0.,-1.)); +#440807 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#440808 = ORIENTED_EDGE('',*,*,#440809,.T.); +#440809 = EDGE_CURVE('',#440801,#440810,#440812,.T.); +#440810 = VERTEX_POINT('',#440811); +#440811 = CARTESIAN_POINT('',(147.103571,-108.149152,1.585)); +#440812 = LINE('',#440813,#440814); +#440813 = CARTESIAN_POINT('',(147.035714,-108.149152,1.585)); +#440814 = VECTOR('',#440815,1.); +#440815 = DIRECTION('',(1.,0.,0.)); +#440816 = ORIENTED_EDGE('',*,*,#440817,.T.); +#440817 = EDGE_CURVE('',#440810,#440818,#440820,.T.); +#440818 = VERTEX_POINT('',#440819); +#440819 = CARTESIAN_POINT('',(147.105012,-107.876187,1.585)); +#440820 = LINE('',#440821,#440822); +#440821 = CARTESIAN_POINT('',(147.103571,-108.149152,1.585)); +#440822 = VECTOR('',#440823,1.); +#440823 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#440824 = ORIENTED_EDGE('',*,*,#440825,.T.); +#440825 = EDGE_CURVE('',#440818,#440826,#440828,.T.); +#440826 = VERTEX_POINT('',#440827); +#440827 = CARTESIAN_POINT('',(147.116211,-107.849151,1.585)); +#440828 = LINE('',#440829,#440830); +#440829 = CARTESIAN_POINT('',(147.105012,-107.876187,1.585)); +#440830 = VECTOR('',#440831,1.); +#440831 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#440832 = ORIENTED_EDGE('',*,*,#440833,.T.); +#440833 = EDGE_CURVE('',#440826,#440668,#440834,.T.); +#440834 = LINE('',#440835,#440836); +#440835 = CARTESIAN_POINT('',(147.116211,-107.849151,1.585)); +#440836 = VECTOR('',#440837,1.); +#440837 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#440838 = PLANE('',#440839); +#440839 = AXIS2_PLACEMENT_3D('',#440840,#440841,#440842); +#440840 = CARTESIAN_POINT('',(0.,0.,1.585)); +#440841 = DIRECTION('',(0.,0.,1.)); +#440842 = DIRECTION('',(1.,0.,-0.)); +#440843 = SHELL_BASED_SURFACE_MODEL('',(#440844)); +#440844 = OPEN_SHELL('',(#440845)); +#440845 = ADVANCED_FACE('',(#440846,#440964,#441031),#441083,.T.); +#440846 = FACE_BOUND('',#440847,.F.); +#440847 = EDGE_LOOP('',(#440848,#440859,#440867,#440876,#440884,#440892, + #440900,#440908,#440916,#440925,#440933,#440942,#440950,#440958)); +#440848 = ORIENTED_EDGE('',*,*,#440849,.T.); +#440849 = EDGE_CURVE('',#440850,#440852,#440854,.T.); +#440850 = VERTEX_POINT('',#440851); +#440851 = CARTESIAN_POINT('',(124.128821,-107.876187,1.585)); +#440852 = VERTEX_POINT('',#440853); +#440853 = CARTESIAN_POINT('',(124.20238,-107.815819,1.585)); +#440854 = CIRCLE('',#440855,7.500074938988E-02); +#440855 = AXIS2_PLACEMENT_3D('',#440856,#440857,#440858); +#440856 = CARTESIAN_POINT('',(124.20238046611,-107.8908197493,1.585)); +#440857 = DIRECTION('',(0.,0.,-1.)); +#440858 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#440859 = ORIENTED_EDGE('',*,*,#440860,.T.); +#440860 = EDGE_CURVE('',#440852,#440861,#440863,.T.); +#440861 = VERTEX_POINT('',#440862); +#440862 = CARTESIAN_POINT('',(124.550345,-107.81726,1.585)); +#440863 = LINE('',#440864,#440865); +#440864 = CARTESIAN_POINT('',(124.20238,-107.815819,1.585)); +#440865 = VECTOR('',#440866,1.); +#440866 = DIRECTION('',(0.999991425254,-4.141185589905E-03,0.)); +#440867 = ORIENTED_EDGE('',*,*,#440868,.T.); +#440868 = EDGE_CURVE('',#440861,#440869,#440871,.T.); +#440869 = VERTEX_POINT('',#440870); +#440870 = CARTESIAN_POINT('',(124.799748,-108.066663,1.585)); +#440871 = CIRCLE('',#440872,0.347870264855); +#440872 = AXIS2_PLACEMENT_3D('',#440873,#440874,#440875); +#440873 = CARTESIAN_POINT('',(124.46301726502,-108.1539907349,1.585)); +#440874 = DIRECTION('',(0.,0.,-1.)); +#440875 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#440876 = ORIENTED_EDGE('',*,*,#440877,.T.); +#440877 = EDGE_CURVE('',#440869,#440878,#440880,.T.); +#440878 = VERTEX_POINT('',#440879); +#440879 = CARTESIAN_POINT('',(124.798526,-108.196343,1.585)); +#440880 = LINE('',#440881,#440882); +#440881 = CARTESIAN_POINT('',(124.799748,-108.066663,1.585)); +#440882 = VECTOR('',#440883,1.); +#440883 = DIRECTION('',(-9.422777212215E-03,-0.999955604649,0.)); +#440884 = ORIENTED_EDGE('',*,*,#440885,.T.); +#440885 = EDGE_CURVE('',#440878,#440886,#440888,.T.); +#440886 = VERTEX_POINT('',#440887); +#440887 = CARTESIAN_POINT('',(124.736321,-108.319054,1.585)); +#440888 = LINE('',#440889,#440890); +#440889 = CARTESIAN_POINT('',(124.798526,-108.196343,1.585)); +#440890 = VECTOR('',#440891,1.); +#440891 = DIRECTION('',(-0.452146551539,-0.891943661859,0.)); +#440892 = ORIENTED_EDGE('',*,*,#440893,.T.); +#440893 = EDGE_CURVE('',#440886,#440894,#440896,.T.); +#440894 = VERTEX_POINT('',#440895); +#440895 = CARTESIAN_POINT('',(124.709644,-108.346762,1.585)); +#440896 = LINE('',#440897,#440898); +#440897 = CARTESIAN_POINT('',(124.736321,-108.319054,1.585)); +#440898 = VECTOR('',#440899,1.); +#440899 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#440900 = ORIENTED_EDGE('',*,*,#440901,.T.); +#440901 = EDGE_CURVE('',#440894,#440902,#440904,.T.); +#440902 = VERTEX_POINT('',#440903); +#440903 = CARTESIAN_POINT('',(124.731603,-108.361595,1.585)); +#440904 = LINE('',#440905,#440906); +#440905 = CARTESIAN_POINT('',(124.709644,-108.346762,1.585)); +#440906 = VECTOR('',#440907,1.); +#440907 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#440908 = ORIENTED_EDGE('',*,*,#440909,.T.); +#440909 = EDGE_CURVE('',#440902,#440910,#440912,.T.); +#440910 = VERTEX_POINT('',#440911); +#440911 = CARTESIAN_POINT('',(124.793271,-108.428706,1.585)); +#440912 = LINE('',#440913,#440914); +#440913 = CARTESIAN_POINT('',(124.731603,-108.361595,1.585)); +#440914 = VECTOR('',#440915,1.); +#440915 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#440916 = ORIENTED_EDGE('',*,*,#440917,.T.); +#440917 = EDGE_CURVE('',#440910,#440918,#440920,.T.); +#440918 = VERTEX_POINT('',#440919); +#440919 = CARTESIAN_POINT('',(124.78394,-108.842863,1.585)); +#440920 = CIRCLE('',#440921,0.341850333486); +#440921 = AXIS2_PLACEMENT_3D('',#440922,#440923,#440924); +#440922 = CARTESIAN_POINT('',(124.51672159864,-108.6296589276,1.585)); +#440923 = DIRECTION('',(0.,0.,-1.)); +#440924 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#440925 = ORIENTED_EDGE('',*,*,#440926,.T.); +#440926 = EDGE_CURVE('',#440918,#440927,#440929,.T.); +#440927 = VERTEX_POINT('',#440928); +#440928 = CARTESIAN_POINT('',(124.71841,-108.906317,1.585)); +#440929 = LINE('',#440930,#440931); +#440930 = CARTESIAN_POINT('',(124.78394,-108.842863,1.585)); +#440931 = VECTOR('',#440932,1.); +#440932 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#440933 = ORIENTED_EDGE('',*,*,#440934,.T.); +#440934 = EDGE_CURVE('',#440927,#440935,#440937,.T.); +#440935 = VERTEX_POINT('',#440936); +#440936 = CARTESIAN_POINT('',(124.160712,-108.953179,1.585)); +#440937 = CIRCLE('',#440938,0.612118292739); +#440938 = AXIS2_PLACEMENT_3D('',#440939,#440940,#440941); +#440939 = CARTESIAN_POINT('',(124.39397614383,-108.3872491072,1.585)); +#440940 = DIRECTION('',(-0.,0.,-1.)); +#440941 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#440942 = ORIENTED_EDGE('',*,*,#440943,.T.); +#440943 = EDGE_CURVE('',#440935,#440944,#440946,.T.); +#440944 = VERTEX_POINT('',#440945); +#440945 = CARTESIAN_POINT('',(124.14002,-108.932487,1.585)); +#440946 = LINE('',#440947,#440948); +#440947 = CARTESIAN_POINT('',(124.160712,-108.953179,1.585)); +#440948 = VECTOR('',#440949,1.); +#440949 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#440950 = ORIENTED_EDGE('',*,*,#440951,.T.); +#440951 = EDGE_CURVE('',#440944,#440952,#440954,.T.); +#440952 = VERTEX_POINT('',#440953); +#440953 = CARTESIAN_POINT('',(124.12738,-108.890819,1.585)); +#440954 = LINE('',#440955,#440956); +#440955 = CARTESIAN_POINT('',(124.14002,-108.932487,1.585)); +#440956 = VECTOR('',#440957,1.); +#440957 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#440958 = ORIENTED_EDGE('',*,*,#440959,.T.); +#440959 = EDGE_CURVE('',#440952,#440850,#440960,.T.); +#440960 = LINE('',#440961,#440962); +#440961 = CARTESIAN_POINT('',(124.12738,-108.890819,1.585)); +#440962 = VECTOR('',#440963,1.); +#440963 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#440964 = FACE_BOUND('',#440965,.F.); +#440965 = EDGE_LOOP('',(#440966,#440976,#440984,#440992,#441000,#441009, + #441017,#441025)); +#440966 = ORIENTED_EDGE('',*,*,#440967,.T.); +#440967 = EDGE_CURVE('',#440968,#440970,#440972,.T.); +#440968 = VERTEX_POINT('',#440969); +#440969 = CARTESIAN_POINT('',(124.638056,-108.48018,1.585)); +#440970 = VERTEX_POINT('',#440971); +#440971 = CARTESIAN_POINT('',(124.523543,-108.442009,1.585)); +#440972 = LINE('',#440973,#440974); +#440973 = CARTESIAN_POINT('',(124.638056,-108.48018,1.585)); +#440974 = VECTOR('',#440975,1.); +#440975 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#440976 = ORIENTED_EDGE('',*,*,#440977,.T.); +#440977 = EDGE_CURVE('',#440970,#440978,#440980,.T.); +#440978 = VERTEX_POINT('',#440979); +#440979 = CARTESIAN_POINT('',(124.27738,-108.442009,1.585)); +#440980 = LINE('',#440981,#440982); +#440981 = CARTESIAN_POINT('',(124.523543,-108.442009,1.585)); +#440982 = VECTOR('',#440983,1.); +#440983 = DIRECTION('',(-1.,0.,0.)); +#440984 = ORIENTED_EDGE('',*,*,#440985,.T.); +#440985 = EDGE_CURVE('',#440978,#440986,#440988,.T.); +#440986 = VERTEX_POINT('',#440987); +#440987 = CARTESIAN_POINT('',(124.27738,-108.815819,1.585)); +#440988 = LINE('',#440989,#440990); +#440989 = CARTESIAN_POINT('',(124.27738,-108.442009,1.585)); +#440990 = VECTOR('',#440991,1.); +#440991 = DIRECTION('',(0.,-1.,0.)); +#440992 = ORIENTED_EDGE('',*,*,#440993,.T.); +#440993 = EDGE_CURVE('',#440986,#440994,#440996,.T.); +#440994 = VERTEX_POINT('',#440995); +#440995 = CARTESIAN_POINT('',(124.565627,-108.815819,1.585)); +#440996 = LINE('',#440997,#440998); +#440997 = CARTESIAN_POINT('',(124.27738,-108.815819,1.585)); +#440998 = VECTOR('',#440999,1.); +#440999 = DIRECTION('',(1.,0.,0.)); +#441000 = ORIENTED_EDGE('',*,*,#441001,.T.); +#441001 = EDGE_CURVE('',#440994,#441002,#441004,.T.); +#441002 = VERTEX_POINT('',#441003); +#441003 = CARTESIAN_POINT('',(124.698808,-108.682637,1.585)); +#441004 = CIRCLE('',#441005,0.186867760544); +#441005 = AXIS2_PLACEMENT_3D('',#441006,#441007,#441008); +#441006 = CARTESIAN_POINT('',(124.51808796928,-108.6350993262,1.585)); +#441007 = DIRECTION('',(0.,0.,1.)); +#441008 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#441009 = ORIENTED_EDGE('',*,*,#441010,.T.); +#441010 = EDGE_CURVE('',#441002,#441011,#441013,.T.); +#441011 = VERTEX_POINT('',#441012); +#441012 = CARTESIAN_POINT('',(124.698808,-108.57519,1.585)); +#441013 = LINE('',#441014,#441015); +#441014 = CARTESIAN_POINT('',(124.698808,-108.682637,1.585)); +#441015 = VECTOR('',#441016,1.); +#441016 = DIRECTION('',(0.,1.,0.)); +#441017 = ORIENTED_EDGE('',*,*,#441018,.T.); +#441018 = EDGE_CURVE('',#441011,#441019,#441021,.T.); +#441019 = VERTEX_POINT('',#441020); +#441020 = CARTESIAN_POINT('',(124.66455,-108.506674,1.585)); +#441021 = LINE('',#441022,#441023); +#441022 = CARTESIAN_POINT('',(124.698808,-108.57519,1.585)); +#441023 = VECTOR('',#441024,1.); +#441024 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#441025 = ORIENTED_EDGE('',*,*,#441026,.T.); +#441026 = EDGE_CURVE('',#441019,#440968,#441027,.T.); +#441027 = LINE('',#441028,#441029); +#441028 = CARTESIAN_POINT('',(124.66455,-108.506674,1.585)); +#441029 = VECTOR('',#441030,1.); +#441030 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#441031 = FACE_BOUND('',#441032,.F.); +#441032 = EDGE_LOOP('',(#441033,#441044,#441052,#441060,#441068,#441077) + ); +#441033 = ORIENTED_EDGE('',*,*,#441034,.T.); +#441034 = EDGE_CURVE('',#441035,#441037,#441039,.T.); +#441035 = VERTEX_POINT('',#441036); +#441036 = CARTESIAN_POINT('',(124.651189,-108.099,1.585)); +#441037 = VERTEX_POINT('',#441038); +#441038 = CARTESIAN_POINT('',(124.518008,-107.965819,1.585)); +#441039 = CIRCLE('',#441040,0.18686440374); +#441040 = AXIS2_PLACEMENT_3D('',#441041,#441042,#441043); +#441041 = CARTESIAN_POINT('',(124.470472,-108.146536,1.585)); +#441042 = DIRECTION('',(0.,0.,1.)); +#441043 = DIRECTION('',(0.967102328658,0.254387668538,-0.)); +#441044 = ORIENTED_EDGE('',*,*,#441045,.T.); +#441045 = EDGE_CURVE('',#441037,#441046,#441048,.T.); +#441046 = VERTEX_POINT('',#441047); +#441047 = CARTESIAN_POINT('',(124.27738,-107.965819,1.585)); +#441048 = LINE('',#441049,#441050); +#441049 = CARTESIAN_POINT('',(124.518008,-107.965819,1.585)); +#441050 = VECTOR('',#441051,1.); +#441051 = DIRECTION('',(-1.,0.,0.)); +#441052 = ORIENTED_EDGE('',*,*,#441053,.T.); +#441053 = EDGE_CURVE('',#441046,#441054,#441056,.T.); +#441054 = VERTEX_POINT('',#441055); +#441055 = CARTESIAN_POINT('',(124.27738,-108.292009,1.585)); +#441056 = LINE('',#441057,#441058); +#441057 = CARTESIAN_POINT('',(124.27738,-107.965819,1.585)); +#441058 = VECTOR('',#441059,1.); +#441059 = DIRECTION('',(0.,-1.,0.)); +#441060 = ORIENTED_EDGE('',*,*,#441061,.T.); +#441061 = EDGE_CURVE('',#441054,#441062,#441064,.T.); +#441062 = VERTEX_POINT('',#441063); +#441063 = CARTESIAN_POINT('',(124.518008,-108.292009,1.585)); +#441064 = LINE('',#441065,#441066); +#441065 = CARTESIAN_POINT('',(124.27738,-108.292009,1.585)); +#441066 = VECTOR('',#441067,1.); +#441067 = DIRECTION('',(1.,0.,0.)); +#441068 = ORIENTED_EDGE('',*,*,#441069,.T.); +#441069 = EDGE_CURVE('',#441062,#441070,#441072,.T.); +#441070 = VERTEX_POINT('',#441071); +#441071 = CARTESIAN_POINT('',(124.651189,-108.158828,1.585)); +#441072 = CIRCLE('',#441073,0.18686440374); +#441073 = AXIS2_PLACEMENT_3D('',#441074,#441075,#441076); +#441074 = CARTESIAN_POINT('',(124.470472,-108.111292,1.585)); +#441075 = DIRECTION('',(0.,0.,1.)); +#441076 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#441077 = ORIENTED_EDGE('',*,*,#441078,.T.); +#441078 = EDGE_CURVE('',#441070,#441035,#441079,.T.); +#441079 = LINE('',#441080,#441081); +#441080 = CARTESIAN_POINT('',(124.651189,-108.158828,1.585)); +#441081 = VECTOR('',#441082,1.); +#441082 = DIRECTION('',(0.,1.,0.)); +#441083 = PLANE('',#441084); +#441084 = AXIS2_PLACEMENT_3D('',#441085,#441086,#441087); +#441085 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441086 = DIRECTION('',(0.,0.,1.)); +#441087 = DIRECTION('',(1.,0.,-0.)); +#441088 = SHELL_BASED_SURFACE_MODEL('',(#441089)); +#441089 = OPEN_SHELL('',(#441090)); +#441090 = ADVANCED_FACE('',(#441091),#441233,.T.); +#441091 = FACE_BOUND('',#441092,.F.); +#441092 = EDGE_LOOP('',(#441093,#441104,#441112,#441120,#441128,#441136, + #441144,#441152,#441160,#441169,#441177,#441186,#441194,#441202, + #441210,#441218,#441227)); +#441093 = ORIENTED_EDGE('',*,*,#441094,.T.); +#441094 = EDGE_CURVE('',#441095,#441097,#441099,.T.); +#441095 = VERTEX_POINT('',#441096); +#441096 = CARTESIAN_POINT('',(125.160712,-108.161792,1.585)); +#441097 = VERTEX_POINT('',#441098); +#441098 = CARTESIAN_POINT('',(125.27738,-108.224152,1.585)); +#441099 = CIRCLE('',#441100,7.500000000002E-02); +#441100 = AXIS2_PLACEMENT_3D('',#441101,#441102,#441103); +#441101 = CARTESIAN_POINT('',(125.20238,-108.2241520655,1.585)); +#441102 = DIRECTION('',(0.,0.,-1.)); +#441103 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#441104 = ORIENTED_EDGE('',*,*,#441105,.T.); +#441105 = EDGE_CURVE('',#441097,#441106,#441108,.T.); +#441106 = VERTEX_POINT('',#441107); +#441107 = CARTESIAN_POINT('',(125.27738,-108.730256,1.585)); +#441108 = LINE('',#441109,#441110); +#441109 = CARTESIAN_POINT('',(125.27738,-108.224152,1.585)); +#441110 = VECTOR('',#441111,1.); +#441111 = DIRECTION('',(0.,-1.,0.)); +#441112 = ORIENTED_EDGE('',*,*,#441113,.T.); +#441113 = EDGE_CURVE('',#441106,#441114,#441116,.T.); +#441114 = VERTEX_POINT('',#441115); +#441115 = CARTESIAN_POINT('',(125.3059,-108.787298,1.585)); +#441116 = LINE('',#441117,#441118); +#441117 = CARTESIAN_POINT('',(125.27738,-108.730256,1.585)); +#441118 = VECTOR('',#441119,1.); +#441119 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#441120 = ORIENTED_EDGE('',*,*,#441121,.T.); +#441121 = EDGE_CURVE('',#441114,#441122,#441124,.T.); +#441122 = VERTEX_POINT('',#441123); +#441123 = CARTESIAN_POINT('',(125.362942,-108.815819,1.585)); +#441124 = LINE('',#441125,#441126); +#441125 = CARTESIAN_POINT('',(125.3059,-108.787298,1.585)); +#441126 = VECTOR('',#441127,1.); +#441127 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#441128 = ORIENTED_EDGE('',*,*,#441129,.T.); +#441129 = EDGE_CURVE('',#441122,#441130,#441132,.T.); +#441130 = VERTEX_POINT('',#441131); +#441131 = CARTESIAN_POINT('',(125.470389,-108.815819,1.585)); +#441132 = LINE('',#441133,#441134); +#441133 = CARTESIAN_POINT('',(125.362942,-108.815819,1.585)); +#441134 = VECTOR('',#441135,1.); +#441135 = DIRECTION('',(1.,0.,0.)); +#441136 = ORIENTED_EDGE('',*,*,#441137,.T.); +#441137 = EDGE_CURVE('',#441130,#441138,#441140,.T.); +#441138 = VERTEX_POINT('',#441139); +#441139 = CARTESIAN_POINT('',(125.538904,-108.781561,1.585)); +#441140 = LINE('',#441141,#441142); +#441141 = CARTESIAN_POINT('',(125.470389,-108.815819,1.585)); +#441142 = VECTOR('',#441143,1.); +#441143 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#441144 = ORIENTED_EDGE('',*,*,#441145,.T.); +#441145 = EDGE_CURVE('',#441138,#441146,#441148,.T.); +#441146 = VERTEX_POINT('',#441147); +#441147 = CARTESIAN_POINT('',(125.555951,-108.764514,1.585)); +#441148 = LINE('',#441149,#441150); +#441149 = CARTESIAN_POINT('',(125.538904,-108.781561,1.585)); +#441150 = VECTOR('',#441151,1.); +#441151 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#441152 = ORIENTED_EDGE('',*,*,#441153,.T.); +#441153 = EDGE_CURVE('',#441146,#441154,#441156,.T.); +#441154 = VERTEX_POINT('',#441155); +#441155 = CARTESIAN_POINT('',(125.557392,-108.20952,1.585)); +#441156 = LINE('',#441157,#441158); +#441157 = CARTESIAN_POINT('',(125.555951,-108.764514,1.585)); +#441158 = VECTOR('',#441159,1.); +#441159 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#441160 = ORIENTED_EDGE('',*,*,#441161,.T.); +#441161 = EDGE_CURVE('',#441154,#441162,#441164,.T.); +#441162 = VERTEX_POINT('',#441163); +#441163 = CARTESIAN_POINT('',(125.705951,-108.224152,1.585)); +#441164 = CIRCLE('',#441165,7.500006711464E-02); +#441165 = AXIS2_PLACEMENT_3D('',#441166,#441167,#441168); +#441166 = CARTESIAN_POINT('',(125.63095093288,-108.2241519328,1.585)); +#441167 = DIRECTION('',(0.,0.,-1.)); +#441168 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#441169 = ORIENTED_EDGE('',*,*,#441170,.T.); +#441170 = EDGE_CURVE('',#441162,#441171,#441173,.T.); +#441171 = VERTEX_POINT('',#441172); +#441172 = CARTESIAN_POINT('',(125.70451,-108.905451,1.585)); +#441173 = LINE('',#441174,#441175); +#441174 = CARTESIAN_POINT('',(125.705951,-108.224152,1.585)); +#441175 = VECTOR('',#441176,1.); +#441176 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#441177 = ORIENTED_EDGE('',*,*,#441178,.T.); +#441178 = EDGE_CURVE('',#441171,#441179,#441181,.T.); +#441179 = VERTEX_POINT('',#441180); +#441180 = CARTESIAN_POINT('',(125.569881,-108.933777,1.585)); +#441181 = CIRCLE('',#441182,7.47233536147E-02); +#441182 = AXIS2_PLACEMENT_3D('',#441183,#441184,#441185); +#441183 = CARTESIAN_POINT('',(125.63118658714,-108.8910545871,1.585)); +#441184 = DIRECTION('',(-0.,0.,-1.)); +#441185 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#441186 = ORIENTED_EDGE('',*,*,#441187,.T.); +#441187 = EDGE_CURVE('',#441179,#441188,#441190,.T.); +#441188 = VERTEX_POINT('',#441189); +#441189 = CARTESIAN_POINT('',(125.502726,-108.964378,1.585)); +#441190 = LINE('',#441191,#441192); +#441191 = CARTESIAN_POINT('',(125.569881,-108.933777,1.585)); +#441192 = VECTOR('',#441193,1.); +#441193 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#441194 = ORIENTED_EDGE('',*,*,#441195,.T.); +#441195 = EDGE_CURVE('',#441188,#441196,#441198,.T.); +#441196 = VERTEX_POINT('',#441197); +#441197 = CARTESIAN_POINT('',(125.325427,-108.963156,1.585)); +#441198 = LINE('',#441199,#441200); +#441199 = CARTESIAN_POINT('',(125.502726,-108.964378,1.585)); +#441200 = VECTOR('',#441201,1.); +#441201 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#441202 = ORIENTED_EDGE('',*,*,#441203,.T.); +#441203 = EDGE_CURVE('',#441196,#441204,#441206,.T.); +#441204 = VERTEX_POINT('',#441205); +#441205 = CARTESIAN_POINT('',(125.204015,-108.90245,1.585)); +#441206 = LINE('',#441207,#441208); +#441207 = CARTESIAN_POINT('',(125.325427,-108.963156,1.585)); +#441208 = VECTOR('',#441209,1.); +#441209 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#441210 = ORIENTED_EDGE('',*,*,#441211,.T.); +#441211 = EDGE_CURVE('',#441204,#441212,#441214,.T.); +#441212 = VERTEX_POINT('',#441213); +#441213 = CARTESIAN_POINT('',(125.182917,-108.876741,1.585)); +#441214 = LINE('',#441215,#441216); +#441215 = CARTESIAN_POINT('',(125.204015,-108.90245,1.585)); +#441216 = VECTOR('',#441217,1.); +#441217 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#441218 = ORIENTED_EDGE('',*,*,#441219,.T.); +#441219 = EDGE_CURVE('',#441212,#441220,#441222,.T.); +#441220 = VERTEX_POINT('',#441221); +#441221 = CARTESIAN_POINT('',(125.14002,-108.182484,1.585)); +#441222 = CIRCLE('',#441223,0.780471555046); +#441223 = AXIS2_PLACEMENT_3D('',#441224,#441225,#441226); +#441224 = CARTESIAN_POINT('',(125.85883564715,-108.4865233291,1.585)); +#441225 = DIRECTION('',(0.,0.,-1.)); +#441226 = DIRECTION('',(-0.866038797673,-0.499976800387,-0.)); +#441227 = ORIENTED_EDGE('',*,*,#441228,.T.); +#441228 = EDGE_CURVE('',#441220,#441095,#441229,.T.); +#441229 = LINE('',#441230,#441231); +#441230 = CARTESIAN_POINT('',(125.14002,-108.182484,1.585)); +#441231 = VECTOR('',#441232,1.); +#441232 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#441233 = PLANE('',#441234); +#441234 = AXIS2_PLACEMENT_3D('',#441235,#441236,#441237); +#441235 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441236 = DIRECTION('',(0.,0.,1.)); +#441237 = DIRECTION('',(1.,0.,-0.)); +#441238 = SHELL_BASED_SURFACE_MODEL('',(#441239)); +#441239 = OPEN_SHELL('',(#441240)); +#441240 = ADVANCED_FACE('',(#441241,#441318),#441395,.T.); +#441241 = FACE_BOUND('',#441242,.F.); +#441242 = EDGE_LOOP('',(#441243,#441254,#441262,#441270,#441279,#441287, + #441296,#441304,#441312)); +#441243 = ORIENTED_EDGE('',*,*,#441244,.T.); +#441244 = EDGE_CURVE('',#441245,#441247,#441249,.T.); +#441245 = VERTEX_POINT('',#441246); +#441246 = CARTESIAN_POINT('',(127.257778,-108.208653,1.585)); +#441247 = VERTEX_POINT('',#441248); +#441248 = CARTESIAN_POINT('',(127.741688,-108.279549,1.585)); +#441249 = CIRCLE('',#441250,0.34461174713); +#441250 = AXIS2_PLACEMENT_3D('',#441251,#441252,#441253); +#441251 = CARTESIAN_POINT('',(127.46453494377,-108.4843499757,1.585)); +#441252 = DIRECTION('',(0.,0.,-1.)); +#441253 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#441254 = ORIENTED_EDGE('',*,*,#441255,.T.); +#441255 = EDGE_CURVE('',#441247,#441256,#441258,.T.); +#441256 = VERTEX_POINT('',#441257); +#441257 = CARTESIAN_POINT('',(127.799749,-108.399996,1.585)); +#441258 = LINE('',#441259,#441260); +#441259 = CARTESIAN_POINT('',(127.741688,-108.279549,1.585)); +#441260 = VECTOR('',#441261,1.); +#441261 = DIRECTION('',(0.434228424707,-0.900802794831,0.)); +#441262 = ORIENTED_EDGE('',*,*,#441263,.T.); +#441263 = EDGE_CURVE('',#441256,#441264,#441266,.T.); +#441264 = VERTEX_POINT('',#441265); +#441265 = CARTESIAN_POINT('',(127.798527,-108.720152,1.585)); +#441266 = LINE('',#441267,#441268); +#441267 = CARTESIAN_POINT('',(127.799749,-108.399996,1.585)); +#441268 = VECTOR('',#441269,1.); +#441269 = DIRECTION('',(-3.816861463332E-03,-0.999992715758,0.)); +#441270 = ORIENTED_EDGE('',*,*,#441271,.T.); +#441271 = EDGE_CURVE('',#441264,#441272,#441274,.T.); +#441272 = VERTEX_POINT('',#441273); +#441273 = CARTESIAN_POINT('',(127.550346,-108.964378,1.585)); +#441274 = CIRCLE('',#441275,0.348635327447); +#441275 = AXIS2_PLACEMENT_3D('',#441276,#441277,#441278); +#441276 = CARTESIAN_POINT('',(127.46257448129,-108.6269720841,1.585)); +#441277 = DIRECTION('',(0.,0.,-1.)); +#441278 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#441279 = ORIENTED_EDGE('',*,*,#441280,.T.); +#441280 = EDGE_CURVE('',#441272,#441281,#441283,.T.); +#441281 = VERTEX_POINT('',#441282); +#441282 = CARTESIAN_POINT('',(127.373047,-108.963156,1.585)); +#441283 = LINE('',#441284,#441285); +#441284 = CARTESIAN_POINT('',(127.550346,-108.964378,1.585)); +#441285 = VECTOR('',#441286,1.); +#441286 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#441287 = ORIENTED_EDGE('',*,*,#441288,.T.); +#441288 = EDGE_CURVE('',#441281,#441289,#441291,.T.); +#441289 = VERTEX_POINT('',#441290); +#441290 = CARTESIAN_POINT('',(127.128822,-108.714974,1.585)); +#441291 = CIRCLE('',#441292,0.348628446662); +#441292 = AXIS2_PLACEMENT_3D('',#441293,#441294,#441295); +#441293 = CARTESIAN_POINT('',(127.46622261322,-108.6272094284,1.585)); +#441294 = DIRECTION('',(0.,0.,-1.)); +#441295 = DIRECTION('',(-0.267263369124,-0.963623521674,-0.)); +#441296 = ORIENTED_EDGE('',*,*,#441297,.T.); +#441297 = EDGE_CURVE('',#441289,#441298,#441300,.T.); +#441298 = VERTEX_POINT('',#441299); +#441299 = CARTESIAN_POINT('',(127.130044,-108.394819,1.585)); +#441300 = LINE('',#441301,#441302); +#441301 = CARTESIAN_POINT('',(127.128822,-108.714974,1.585)); +#441302 = VECTOR('',#441303,1.); +#441303 = DIRECTION('',(3.816873385076E-03,0.999992715712,0.)); +#441304 = ORIENTED_EDGE('',*,*,#441305,.T.); +#441305 = EDGE_CURVE('',#441298,#441306,#441308,.T.); +#441306 = VERTEX_POINT('',#441307); +#441307 = CARTESIAN_POINT('',(127.192248,-108.272106,1.585)); +#441308 = LINE('',#441309,#441310); +#441309 = CARTESIAN_POINT('',(127.130044,-108.394819,1.585)); +#441310 = VECTOR('',#441311,1.); +#441311 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#441312 = ORIENTED_EDGE('',*,*,#441313,.T.); +#441313 = EDGE_CURVE('',#441306,#441245,#441314,.T.); +#441314 = LINE('',#441315,#441316); +#441315 = CARTESIAN_POINT('',(127.192248,-108.272106,1.585)); +#441316 = VECTOR('',#441317,1.); +#441317 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#441318 = FACE_BOUND('',#441319,.F.); +#441319 = EDGE_LOOP('',(#441320,#441331,#441339,#441347,#441356,#441364, + #441373,#441381,#441389)); +#441320 = ORIENTED_EDGE('',*,*,#441321,.T.); +#441321 = EDGE_CURVE('',#441322,#441324,#441326,.T.); +#441322 = VERTEX_POINT('',#441323); +#441323 = CARTESIAN_POINT('',(127.586525,-108.33341,1.585)); +#441324 = VERTEX_POINT('',#441325); +#441325 = CARTESIAN_POINT('',(127.311639,-108.363817,1.585)); +#441326 = CIRCLE('',#441327,0.198386215365); +#441327 = AXIS2_PLACEMENT_3D('',#441328,#441329,#441330); +#441328 = CARTESIAN_POINT('',(127.46472195783,-108.4900021753,1.585)); +#441329 = DIRECTION('',(0.,0.,1.)); +#441330 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#441331 = ORIENTED_EDGE('',*,*,#441332,.T.); +#441332 = EDGE_CURVE('',#441324,#441333,#441335,.T.); +#441333 = VERTEX_POINT('',#441334); +#441334 = CARTESIAN_POINT('',(127.277381,-108.432333,1.585)); +#441335 = LINE('',#441336,#441337); +#441336 = CARTESIAN_POINT('',(127.311639,-108.363817,1.585)); +#441337 = VECTOR('',#441338,1.); +#441338 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#441339 = ORIENTED_EDGE('',*,*,#441340,.T.); +#441340 = EDGE_CURVE('',#441333,#441341,#441343,.T.); +#441341 = VERTEX_POINT('',#441342); +#441342 = CARTESIAN_POINT('',(127.277381,-108.682637,1.585)); +#441343 = LINE('',#441344,#441345); +#441344 = CARTESIAN_POINT('',(127.277381,-108.432333,1.585)); +#441345 = VECTOR('',#441346,1.); +#441346 = DIRECTION('',(0.,-1.,0.)); +#441347 = ORIENTED_EDGE('',*,*,#441348,.T.); +#441348 = EDGE_CURVE('',#441341,#441349,#441351,.T.); +#441349 = VERTEX_POINT('',#441350); +#441350 = CARTESIAN_POINT('',(127.410562,-108.815819,1.585)); +#441351 = CIRCLE('',#441352,0.186867373533); +#441352 = AXIS2_PLACEMENT_3D('',#441353,#441354,#441355); +#441353 = CARTESIAN_POINT('',(127.45810071388,-108.635099643,1.585)); +#441354 = DIRECTION('',(0.,0.,1.)); +#441355 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#441356 = ORIENTED_EDGE('',*,*,#441357,.T.); +#441357 = EDGE_CURVE('',#441349,#441358,#441360,.T.); +#441358 = VERTEX_POINT('',#441359); +#441359 = CARTESIAN_POINT('',(127.518009,-108.815819,1.585)); +#441360 = LINE('',#441361,#441362); +#441361 = CARTESIAN_POINT('',(127.410562,-108.815819,1.585)); +#441362 = VECTOR('',#441363,1.); +#441363 = DIRECTION('',(1.,0.,0.)); +#441364 = ORIENTED_EDGE('',*,*,#441365,.T.); +#441365 = EDGE_CURVE('',#441358,#441366,#441368,.T.); +#441366 = VERTEX_POINT('',#441367); +#441367 = CARTESIAN_POINT('',(127.65119,-108.682637,1.585)); +#441368 = CIRCLE('',#441369,0.186867760544); +#441369 = AXIS2_PLACEMENT_3D('',#441370,#441371,#441372); +#441370 = CARTESIAN_POINT('',(127.47046996928,-108.6350993262,1.585)); +#441371 = DIRECTION('',(0.,0.,1.)); +#441372 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#441373 = ORIENTED_EDGE('',*,*,#441374,.T.); +#441374 = EDGE_CURVE('',#441366,#441375,#441377,.T.); +#441375 = VERTEX_POINT('',#441376); +#441376 = CARTESIAN_POINT('',(127.65119,-108.432333,1.585)); +#441377 = LINE('',#441378,#441379); +#441378 = CARTESIAN_POINT('',(127.65119,-108.682637,1.585)); +#441379 = VECTOR('',#441380,1.); +#441380 = DIRECTION('',(0.,1.,0.)); +#441381 = ORIENTED_EDGE('',*,*,#441382,.T.); +#441382 = EDGE_CURVE('',#441375,#441383,#441385,.T.); +#441383 = VERTEX_POINT('',#441384); +#441384 = CARTESIAN_POINT('',(127.616932,-108.363817,1.585)); +#441385 = LINE('',#441386,#441387); +#441386 = CARTESIAN_POINT('',(127.65119,-108.432333,1.585)); +#441387 = VECTOR('',#441388,1.); +#441388 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#441389 = ORIENTED_EDGE('',*,*,#441390,.T.); +#441390 = EDGE_CURVE('',#441383,#441322,#441391,.T.); +#441391 = LINE('',#441392,#441393); +#441392 = CARTESIAN_POINT('',(127.616932,-108.363817,1.585)); +#441393 = VECTOR('',#441394,1.); +#441394 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#441395 = PLANE('',#441396); +#441396 = AXIS2_PLACEMENT_3D('',#441397,#441398,#441399); +#441397 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441398 = DIRECTION('',(0.,0.,1.)); +#441399 = DIRECTION('',(1.,0.,-0.)); +#441400 = SHELL_BASED_SURFACE_MODEL('',(#441401)); +#441401 = OPEN_SHELL('',(#441402)); +#441402 = ADVANCED_FACE('',(#441403),#441561,.T.); +#441403 = FACE_BOUND('',#441404,.F.); +#441404 = EDGE_LOOP('',(#441405,#441416,#441424,#441432,#441440,#441448, + #441457,#441465,#441474,#441482,#441490,#441498,#441506,#441514, + #441522,#441530,#441539,#441547,#441555)); +#441405 = ORIENTED_EDGE('',*,*,#441406,.T.); +#441406 = EDGE_CURVE('',#441407,#441409,#441411,.T.); +#441407 = VERTEX_POINT('',#441408); +#441408 = CARTESIAN_POINT('',(128.113094,-108.161792,1.585)); +#441409 = VERTEX_POINT('',#441410); +#441410 = CARTESIAN_POINT('',(128.215831,-108.181193,1.585)); +#441411 = CIRCLE('',#441412,7.44076017233E-02); +#441412 = AXIS2_PLACEMENT_3D('',#441413,#441414,#441415); +#441413 = CARTESIAN_POINT('',(128.15463706572,-108.223522583,1.585)); +#441414 = DIRECTION('',(0.,0.,-1.)); +#441415 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#441416 = ORIENTED_EDGE('',*,*,#441417,.T.); +#441417 = EDGE_CURVE('',#441409,#441418,#441420,.T.); +#441418 = VERTEX_POINT('',#441419); +#441419 = CARTESIAN_POINT('',(128.282987,-108.150593,1.585)); +#441420 = LINE('',#441421,#441422); +#441421 = CARTESIAN_POINT('',(128.215831,-108.181193,1.585)); +#441422 = VECTOR('',#441423,1.); +#441423 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#441424 = ORIENTED_EDGE('',*,*,#441425,.T.); +#441425 = EDGE_CURVE('',#441418,#441426,#441428,.T.); +#441426 = VERTEX_POINT('',#441427); +#441427 = CARTESIAN_POINT('',(128.455108,-108.150593,1.585)); +#441428 = LINE('',#441429,#441430); +#441429 = CARTESIAN_POINT('',(128.282987,-108.150593,1.585)); +#441430 = VECTOR('',#441431,1.); +#441431 = DIRECTION('',(1.,0.,0.)); +#441432 = ORIENTED_EDGE('',*,*,#441433,.T.); +#441433 = EDGE_CURVE('',#441426,#441434,#441436,.T.); +#441434 = VERTEX_POINT('',#441435); +#441435 = CARTESIAN_POINT('',(128.581698,-108.212521,1.585)); +#441436 = LINE('',#441437,#441438); +#441437 = CARTESIAN_POINT('',(128.455108,-108.150593,1.585)); +#441438 = VECTOR('',#441439,1.); +#441439 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#441440 = ORIENTED_EDGE('',*,*,#441441,.T.); +#441441 = EDGE_CURVE('',#441434,#441442,#441444,.T.); +#441442 = VERTEX_POINT('',#441443); +#441443 = CARTESIAN_POINT('',(128.602796,-108.23823,1.585)); +#441444 = LINE('',#441445,#441446); +#441445 = CARTESIAN_POINT('',(128.581698,-108.212521,1.585)); +#441446 = VECTOR('',#441447,1.); +#441447 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#441448 = ORIENTED_EDGE('',*,*,#441449,.T.); +#441449 = EDGE_CURVE('',#441442,#441450,#441452,.T.); +#441450 = VERTEX_POINT('',#441451); +#441451 = CARTESIAN_POINT('',(128.645693,-108.932487,1.585)); +#441452 = CIRCLE('',#441453,0.780466291445); +#441453 = AXIS2_PLACEMENT_3D('',#441454,#441455,#441456); +#441454 = CARTESIAN_POINT('',(127.9268832213,-108.6284473082,1.585)); +#441455 = DIRECTION('',(0.,0.,-1.)); +#441456 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#441457 = ORIENTED_EDGE('',*,*,#441458,.T.); +#441458 = EDGE_CURVE('',#441450,#441459,#441461,.T.); +#441459 = VERTEX_POINT('',#441460); +#441460 = CARTESIAN_POINT('',(128.625001,-108.953179,1.585)); +#441461 = LINE('',#441462,#441463); +#441462 = CARTESIAN_POINT('',(128.645693,-108.932487,1.585)); +#441463 = VECTOR('',#441464,1.); +#441464 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#441465 = ORIENTED_EDGE('',*,*,#441466,.T.); +#441466 = EDGE_CURVE('',#441459,#441467,#441469,.T.); +#441467 = VERTEX_POINT('',#441468); +#441468 = CARTESIAN_POINT('',(128.508333,-108.890819,1.585)); +#441469 = CIRCLE('',#441470,7.499979580333E-02); +#441470 = AXIS2_PLACEMENT_3D('',#441471,#441472,#441473); +#441471 = CARTESIAN_POINT('',(128.5833327958,-108.8908193164,1.585)); +#441472 = DIRECTION('',(-0.,0.,-1.)); +#441473 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#441474 = ORIENTED_EDGE('',*,*,#441475,.T.); +#441475 = EDGE_CURVE('',#441467,#441476,#441478,.T.); +#441476 = VERTEX_POINT('',#441477); +#441477 = CARTESIAN_POINT('',(128.508333,-108.384714,1.585)); +#441478 = LINE('',#441479,#441480); +#441479 = CARTESIAN_POINT('',(128.508333,-108.890819,1.585)); +#441480 = VECTOR('',#441481,1.); +#441481 = DIRECTION('',(0.,1.,0.)); +#441482 = ORIENTED_EDGE('',*,*,#441483,.T.); +#441483 = EDGE_CURVE('',#441476,#441484,#441486,.T.); +#441484 = VERTEX_POINT('',#441485); +#441485 = CARTESIAN_POINT('',(128.479812,-108.327672,1.585)); +#441486 = LINE('',#441487,#441488); +#441487 = CARTESIAN_POINT('',(128.508333,-108.384714,1.585)); +#441488 = VECTOR('',#441489,1.); +#441489 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#441490 = ORIENTED_EDGE('',*,*,#441491,.T.); +#441491 = EDGE_CURVE('',#441484,#441492,#441494,.T.); +#441492 = VERTEX_POINT('',#441493); +#441493 = CARTESIAN_POINT('',(128.422771,-108.299152,1.585)); +#441494 = LINE('',#441495,#441496); +#441495 = CARTESIAN_POINT('',(128.479812,-108.327672,1.585)); +#441496 = VECTOR('',#441497,1.); +#441497 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#441498 = ORIENTED_EDGE('',*,*,#441499,.T.); +#441499 = EDGE_CURVE('',#441492,#441500,#441502,.T.); +#441500 = VERTEX_POINT('',#441501); +#441501 = CARTESIAN_POINT('',(128.315324,-108.299152,1.585)); +#441502 = LINE('',#441503,#441504); +#441503 = CARTESIAN_POINT('',(128.422771,-108.299152,1.585)); +#441504 = VECTOR('',#441505,1.); +#441505 = DIRECTION('',(-1.,0.,0.)); +#441506 = ORIENTED_EDGE('',*,*,#441507,.T.); +#441507 = EDGE_CURVE('',#441500,#441508,#441510,.T.); +#441508 = VERTEX_POINT('',#441509); +#441509 = CARTESIAN_POINT('',(128.246808,-108.33341,1.585)); +#441510 = LINE('',#441511,#441512); +#441511 = CARTESIAN_POINT('',(128.315324,-108.299152,1.585)); +#441512 = VECTOR('',#441513,1.); +#441513 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#441514 = ORIENTED_EDGE('',*,*,#441515,.T.); +#441515 = EDGE_CURVE('',#441508,#441516,#441518,.T.); +#441516 = VERTEX_POINT('',#441517); +#441517 = CARTESIAN_POINT('',(128.229762,-108.350456,1.585)); +#441518 = LINE('',#441519,#441520); +#441519 = CARTESIAN_POINT('',(128.246808,-108.33341,1.585)); +#441520 = VECTOR('',#441521,1.); +#441521 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#441522 = ORIENTED_EDGE('',*,*,#441523,.T.); +#441523 = EDGE_CURVE('',#441516,#441524,#441526,.T.); +#441524 = VERTEX_POINT('',#441525); +#441525 = CARTESIAN_POINT('',(128.228321,-108.905451,1.585)); +#441526 = LINE('',#441527,#441528); +#441527 = CARTESIAN_POINT('',(128.229762,-108.350456,1.585)); +#441528 = VECTOR('',#441529,1.); +#441529 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#441530 = ORIENTED_EDGE('',*,*,#441531,.T.); +#441531 = EDGE_CURVE('',#441524,#441532,#441534,.T.); +#441532 = VERTEX_POINT('',#441533); +#441533 = CARTESIAN_POINT('',(128.079762,-108.890819,1.585)); +#441534 = CIRCLE('',#441535,7.500006711465E-02); +#441535 = AXIS2_PLACEMENT_3D('',#441536,#441537,#441538); +#441536 = CARTESIAN_POINT('',(128.15476206711,-108.8908190671,1.585)); +#441537 = DIRECTION('',(-0.,0.,-1.)); +#441538 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#441539 = ORIENTED_EDGE('',*,*,#441540,.T.); +#441540 = EDGE_CURVE('',#441532,#441541,#441543,.T.); +#441541 = VERTEX_POINT('',#441542); +#441542 = CARTESIAN_POINT('',(128.081203,-108.20952,1.585)); +#441543 = LINE('',#441544,#441545); +#441544 = CARTESIAN_POINT('',(128.079762,-108.890819,1.585)); +#441545 = VECTOR('',#441546,1.); +#441546 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#441547 = ORIENTED_EDGE('',*,*,#441548,.T.); +#441548 = EDGE_CURVE('',#441541,#441549,#441551,.T.); +#441549 = VERTEX_POINT('',#441550); +#441550 = CARTESIAN_POINT('',(128.092402,-108.182484,1.585)); +#441551 = LINE('',#441552,#441553); +#441552 = CARTESIAN_POINT('',(128.081203,-108.20952,1.585)); +#441553 = VECTOR('',#441554,1.); +#441554 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#441555 = ORIENTED_EDGE('',*,*,#441556,.T.); +#441556 = EDGE_CURVE('',#441549,#441407,#441557,.T.); +#441557 = LINE('',#441558,#441559); +#441558 = CARTESIAN_POINT('',(128.092402,-108.182484,1.585)); +#441559 = VECTOR('',#441560,1.); +#441560 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#441561 = PLANE('',#441562); +#441562 = AXIS2_PLACEMENT_3D('',#441563,#441564,#441565); +#441563 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441564 = DIRECTION('',(0.,0.,1.)); +#441565 = DIRECTION('',(1.,0.,-0.)); +#441566 = SHELL_BASED_SURFACE_MODEL('',(#441567)); +#441567 = OPEN_SHELL('',(#441568)); +#441568 = ADVANCED_FACE('',(#441569,#441687,#441754),#441806,.T.); +#441569 = FACE_BOUND('',#441570,.F.); +#441570 = EDGE_LOOP('',(#441571,#441582,#441590,#441599,#441607,#441615, + #441623,#441631,#441639,#441648,#441656,#441665,#441673,#441681)); +#441571 = ORIENTED_EDGE('',*,*,#441572,.T.); +#441572 = EDGE_CURVE('',#441573,#441575,#441577,.T.); +#441573 = VERTEX_POINT('',#441574); +#441574 = CARTESIAN_POINT('',(134.378821,-107.876187,1.585)); +#441575 = VERTEX_POINT('',#441576); +#441576 = CARTESIAN_POINT('',(134.45238,-107.815819,1.585)); +#441577 = CIRCLE('',#441578,7.500074938989E-02); +#441578 = AXIS2_PLACEMENT_3D('',#441579,#441580,#441581); +#441579 = CARTESIAN_POINT('',(134.45238046611,-107.8908197493,1.585)); +#441580 = DIRECTION('',(0.,0.,-1.)); +#441581 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#441582 = ORIENTED_EDGE('',*,*,#441583,.T.); +#441583 = EDGE_CURVE('',#441575,#441584,#441586,.T.); +#441584 = VERTEX_POINT('',#441585); +#441585 = CARTESIAN_POINT('',(134.800345,-107.81726,1.585)); +#441586 = LINE('',#441587,#441588); +#441587 = CARTESIAN_POINT('',(134.45238,-107.815819,1.585)); +#441588 = VECTOR('',#441589,1.); +#441589 = DIRECTION('',(0.999991425254,-4.141185589905E-03,0.)); +#441590 = ORIENTED_EDGE('',*,*,#441591,.T.); +#441591 = EDGE_CURVE('',#441584,#441592,#441594,.T.); +#441592 = VERTEX_POINT('',#441593); +#441593 = CARTESIAN_POINT('',(135.049748,-108.066663,1.585)); +#441594 = CIRCLE('',#441595,0.347870264855); +#441595 = AXIS2_PLACEMENT_3D('',#441596,#441597,#441598); +#441596 = CARTESIAN_POINT('',(134.71301726502,-108.1539907349,1.585)); +#441597 = DIRECTION('',(0.,0.,-1.)); +#441598 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#441599 = ORIENTED_EDGE('',*,*,#441600,.T.); +#441600 = EDGE_CURVE('',#441592,#441601,#441603,.T.); +#441601 = VERTEX_POINT('',#441602); +#441602 = CARTESIAN_POINT('',(135.048526,-108.196343,1.585)); +#441603 = LINE('',#441604,#441605); +#441604 = CARTESIAN_POINT('',(135.049748,-108.066663,1.585)); +#441605 = VECTOR('',#441606,1.); +#441606 = DIRECTION('',(-9.422777212105E-03,-0.999955604649,0.)); +#441607 = ORIENTED_EDGE('',*,*,#441608,.T.); +#441608 = EDGE_CURVE('',#441601,#441609,#441611,.T.); +#441609 = VERTEX_POINT('',#441610); +#441610 = CARTESIAN_POINT('',(134.986321,-108.319054,1.585)); +#441611 = LINE('',#441612,#441613); +#441612 = CARTESIAN_POINT('',(135.048526,-108.196343,1.585)); +#441613 = VECTOR('',#441614,1.); +#441614 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#441615 = ORIENTED_EDGE('',*,*,#441616,.T.); +#441616 = EDGE_CURVE('',#441609,#441617,#441619,.T.); +#441617 = VERTEX_POINT('',#441618); +#441618 = CARTESIAN_POINT('',(134.959644,-108.346762,1.585)); +#441619 = LINE('',#441620,#441621); +#441620 = CARTESIAN_POINT('',(134.986321,-108.319054,1.585)); +#441621 = VECTOR('',#441622,1.); +#441622 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#441623 = ORIENTED_EDGE('',*,*,#441624,.T.); +#441624 = EDGE_CURVE('',#441617,#441625,#441627,.T.); +#441625 = VERTEX_POINT('',#441626); +#441626 = CARTESIAN_POINT('',(134.981603,-108.361595,1.585)); +#441627 = LINE('',#441628,#441629); +#441628 = CARTESIAN_POINT('',(134.959644,-108.346762,1.585)); +#441629 = VECTOR('',#441630,1.); +#441630 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#441631 = ORIENTED_EDGE('',*,*,#441632,.T.); +#441632 = EDGE_CURVE('',#441625,#441633,#441635,.T.); +#441633 = VERTEX_POINT('',#441634); +#441634 = CARTESIAN_POINT('',(135.043271,-108.428706,1.585)); +#441635 = LINE('',#441636,#441637); +#441636 = CARTESIAN_POINT('',(134.981603,-108.361595,1.585)); +#441637 = VECTOR('',#441638,1.); +#441638 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#441639 = ORIENTED_EDGE('',*,*,#441640,.T.); +#441640 = EDGE_CURVE('',#441633,#441641,#441643,.T.); +#441641 = VERTEX_POINT('',#441642); +#441642 = CARTESIAN_POINT('',(135.03394,-108.842863,1.585)); +#441643 = CIRCLE('',#441644,0.341850333486); +#441644 = AXIS2_PLACEMENT_3D('',#441645,#441646,#441647); +#441645 = CARTESIAN_POINT('',(134.76672159864,-108.6296589276,1.585)); +#441646 = DIRECTION('',(0.,0.,-1.)); +#441647 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#441648 = ORIENTED_EDGE('',*,*,#441649,.T.); +#441649 = EDGE_CURVE('',#441641,#441650,#441652,.T.); +#441650 = VERTEX_POINT('',#441651); +#441651 = CARTESIAN_POINT('',(134.96841,-108.906317,1.585)); +#441652 = LINE('',#441653,#441654); +#441653 = CARTESIAN_POINT('',(135.03394,-108.842863,1.585)); +#441654 = VECTOR('',#441655,1.); +#441655 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#441656 = ORIENTED_EDGE('',*,*,#441657,.T.); +#441657 = EDGE_CURVE('',#441650,#441658,#441660,.T.); +#441658 = VERTEX_POINT('',#441659); +#441659 = CARTESIAN_POINT('',(134.410712,-108.953179,1.585)); +#441660 = CIRCLE('',#441661,0.612118292739); +#441661 = AXIS2_PLACEMENT_3D('',#441662,#441663,#441664); +#441662 = CARTESIAN_POINT('',(134.64397614383,-108.3872491072,1.585)); +#441663 = DIRECTION('',(-0.,0.,-1.)); +#441664 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#441665 = ORIENTED_EDGE('',*,*,#441666,.T.); +#441666 = EDGE_CURVE('',#441658,#441667,#441669,.T.); +#441667 = VERTEX_POINT('',#441668); +#441668 = CARTESIAN_POINT('',(134.39002,-108.932487,1.585)); +#441669 = LINE('',#441670,#441671); +#441670 = CARTESIAN_POINT('',(134.410712,-108.953179,1.585)); +#441671 = VECTOR('',#441672,1.); +#441672 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#441673 = ORIENTED_EDGE('',*,*,#441674,.T.); +#441674 = EDGE_CURVE('',#441667,#441675,#441677,.T.); +#441675 = VERTEX_POINT('',#441676); +#441676 = CARTESIAN_POINT('',(134.37738,-108.890819,1.585)); +#441677 = LINE('',#441678,#441679); +#441678 = CARTESIAN_POINT('',(134.39002,-108.932487,1.585)); +#441679 = VECTOR('',#441680,1.); +#441680 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#441681 = ORIENTED_EDGE('',*,*,#441682,.T.); +#441682 = EDGE_CURVE('',#441675,#441573,#441683,.T.); +#441683 = LINE('',#441684,#441685); +#441684 = CARTESIAN_POINT('',(134.37738,-108.890819,1.585)); +#441685 = VECTOR('',#441686,1.); +#441686 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#441687 = FACE_BOUND('',#441688,.F.); +#441688 = EDGE_LOOP('',(#441689,#441699,#441707,#441715,#441723,#441732, + #441740,#441748)); +#441689 = ORIENTED_EDGE('',*,*,#441690,.T.); +#441690 = EDGE_CURVE('',#441691,#441693,#441695,.T.); +#441691 = VERTEX_POINT('',#441692); +#441692 = CARTESIAN_POINT('',(134.888056,-108.48018,1.585)); +#441693 = VERTEX_POINT('',#441694); +#441694 = CARTESIAN_POINT('',(134.773543,-108.442009,1.585)); +#441695 = LINE('',#441696,#441697); +#441696 = CARTESIAN_POINT('',(134.888056,-108.48018,1.585)); +#441697 = VECTOR('',#441698,1.); +#441698 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#441699 = ORIENTED_EDGE('',*,*,#441700,.T.); +#441700 = EDGE_CURVE('',#441693,#441701,#441703,.T.); +#441701 = VERTEX_POINT('',#441702); +#441702 = CARTESIAN_POINT('',(134.52738,-108.442009,1.585)); +#441703 = LINE('',#441704,#441705); +#441704 = CARTESIAN_POINT('',(134.773543,-108.442009,1.585)); +#441705 = VECTOR('',#441706,1.); +#441706 = DIRECTION('',(-1.,0.,0.)); +#441707 = ORIENTED_EDGE('',*,*,#441708,.T.); +#441708 = EDGE_CURVE('',#441701,#441709,#441711,.T.); +#441709 = VERTEX_POINT('',#441710); +#441710 = CARTESIAN_POINT('',(134.52738,-108.815819,1.585)); +#441711 = LINE('',#441712,#441713); +#441712 = CARTESIAN_POINT('',(134.52738,-108.442009,1.585)); +#441713 = VECTOR('',#441714,1.); +#441714 = DIRECTION('',(0.,-1.,0.)); +#441715 = ORIENTED_EDGE('',*,*,#441716,.T.); +#441716 = EDGE_CURVE('',#441709,#441717,#441719,.T.); +#441717 = VERTEX_POINT('',#441718); +#441718 = CARTESIAN_POINT('',(134.815627,-108.815819,1.585)); +#441719 = LINE('',#441720,#441721); +#441720 = CARTESIAN_POINT('',(134.52738,-108.815819,1.585)); +#441721 = VECTOR('',#441722,1.); +#441722 = DIRECTION('',(1.,0.,0.)); +#441723 = ORIENTED_EDGE('',*,*,#441724,.T.); +#441724 = EDGE_CURVE('',#441717,#441725,#441727,.T.); +#441725 = VERTEX_POINT('',#441726); +#441726 = CARTESIAN_POINT('',(134.948808,-108.682637,1.585)); +#441727 = CIRCLE('',#441728,0.186867760544); +#441728 = AXIS2_PLACEMENT_3D('',#441729,#441730,#441731); +#441729 = CARTESIAN_POINT('',(134.76808796928,-108.6350993262,1.585)); +#441730 = DIRECTION('',(0.,0.,1.)); +#441731 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#441732 = ORIENTED_EDGE('',*,*,#441733,.T.); +#441733 = EDGE_CURVE('',#441725,#441734,#441736,.T.); +#441734 = VERTEX_POINT('',#441735); +#441735 = CARTESIAN_POINT('',(134.948808,-108.57519,1.585)); +#441736 = LINE('',#441737,#441738); +#441737 = CARTESIAN_POINT('',(134.948808,-108.682637,1.585)); +#441738 = VECTOR('',#441739,1.); +#441739 = DIRECTION('',(0.,1.,0.)); +#441740 = ORIENTED_EDGE('',*,*,#441741,.T.); +#441741 = EDGE_CURVE('',#441734,#441742,#441744,.T.); +#441742 = VERTEX_POINT('',#441743); +#441743 = CARTESIAN_POINT('',(134.91455,-108.506674,1.585)); +#441744 = LINE('',#441745,#441746); +#441745 = CARTESIAN_POINT('',(134.948808,-108.57519,1.585)); +#441746 = VECTOR('',#441747,1.); +#441747 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#441748 = ORIENTED_EDGE('',*,*,#441749,.T.); +#441749 = EDGE_CURVE('',#441742,#441691,#441750,.T.); +#441750 = LINE('',#441751,#441752); +#441751 = CARTESIAN_POINT('',(134.91455,-108.506674,1.585)); +#441752 = VECTOR('',#441753,1.); +#441753 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#441754 = FACE_BOUND('',#441755,.F.); +#441755 = EDGE_LOOP('',(#441756,#441767,#441775,#441783,#441791,#441800) + ); +#441756 = ORIENTED_EDGE('',*,*,#441757,.T.); +#441757 = EDGE_CURVE('',#441758,#441760,#441762,.T.); +#441758 = VERTEX_POINT('',#441759); +#441759 = CARTESIAN_POINT('',(134.901189,-108.099,1.585)); +#441760 = VERTEX_POINT('',#441761); +#441761 = CARTESIAN_POINT('',(134.768008,-107.965819,1.585)); +#441762 = CIRCLE('',#441763,0.18686440374); +#441763 = AXIS2_PLACEMENT_3D('',#441764,#441765,#441766); +#441764 = CARTESIAN_POINT('',(134.720472,-108.146536,1.585)); +#441765 = DIRECTION('',(0.,0.,1.)); +#441766 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#441767 = ORIENTED_EDGE('',*,*,#441768,.T.); +#441768 = EDGE_CURVE('',#441760,#441769,#441771,.T.); +#441769 = VERTEX_POINT('',#441770); +#441770 = CARTESIAN_POINT('',(134.52738,-107.965819,1.585)); +#441771 = LINE('',#441772,#441773); +#441772 = CARTESIAN_POINT('',(134.768008,-107.965819,1.585)); +#441773 = VECTOR('',#441774,1.); +#441774 = DIRECTION('',(-1.,0.,0.)); +#441775 = ORIENTED_EDGE('',*,*,#441776,.T.); +#441776 = EDGE_CURVE('',#441769,#441777,#441779,.T.); +#441777 = VERTEX_POINT('',#441778); +#441778 = CARTESIAN_POINT('',(134.52738,-108.292009,1.585)); +#441779 = LINE('',#441780,#441781); +#441780 = CARTESIAN_POINT('',(134.52738,-107.965819,1.585)); +#441781 = VECTOR('',#441782,1.); +#441782 = DIRECTION('',(0.,-1.,0.)); +#441783 = ORIENTED_EDGE('',*,*,#441784,.T.); +#441784 = EDGE_CURVE('',#441777,#441785,#441787,.T.); +#441785 = VERTEX_POINT('',#441786); +#441786 = CARTESIAN_POINT('',(134.768008,-108.292009,1.585)); +#441787 = LINE('',#441788,#441789); +#441788 = CARTESIAN_POINT('',(134.52738,-108.292009,1.585)); +#441789 = VECTOR('',#441790,1.); +#441790 = DIRECTION('',(1.,0.,0.)); +#441791 = ORIENTED_EDGE('',*,*,#441792,.T.); +#441792 = EDGE_CURVE('',#441785,#441793,#441795,.T.); +#441793 = VERTEX_POINT('',#441794); +#441794 = CARTESIAN_POINT('',(134.901189,-108.158828,1.585)); +#441795 = CIRCLE('',#441796,0.18686440374); +#441796 = AXIS2_PLACEMENT_3D('',#441797,#441798,#441799); +#441797 = CARTESIAN_POINT('',(134.720472,-108.111292,1.585)); +#441798 = DIRECTION('',(0.,0.,1.)); +#441799 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#441800 = ORIENTED_EDGE('',*,*,#441801,.T.); +#441801 = EDGE_CURVE('',#441793,#441758,#441802,.T.); +#441802 = LINE('',#441803,#441804); +#441803 = CARTESIAN_POINT('',(134.901189,-108.158828,1.585)); +#441804 = VECTOR('',#441805,1.); +#441805 = DIRECTION('',(0.,1.,0.)); +#441806 = PLANE('',#441807); +#441807 = AXIS2_PLACEMENT_3D('',#441808,#441809,#441810); +#441808 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441809 = DIRECTION('',(0.,0.,1.)); +#441810 = DIRECTION('',(1.,0.,-0.)); +#441811 = SHELL_BASED_SURFACE_MODEL('',(#441812)); +#441812 = OPEN_SHELL('',(#441813)); +#441813 = ADVANCED_FACE('',(#441814),#441956,.T.); +#441814 = FACE_BOUND('',#441815,.F.); +#441815 = EDGE_LOOP('',(#441816,#441827,#441835,#441843,#441851,#441859, + #441867,#441875,#441883,#441892,#441900,#441909,#441917,#441925, + #441933,#441941,#441950)); +#441816 = ORIENTED_EDGE('',*,*,#441817,.T.); +#441817 = EDGE_CURVE('',#441818,#441820,#441822,.T.); +#441818 = VERTEX_POINT('',#441819); +#441819 = CARTESIAN_POINT('',(135.410712,-108.161792,1.585)); +#441820 = VERTEX_POINT('',#441821); +#441821 = CARTESIAN_POINT('',(135.52738,-108.224152,1.585)); +#441822 = CIRCLE('',#441823,7.500000000002E-02); +#441823 = AXIS2_PLACEMENT_3D('',#441824,#441825,#441826); +#441824 = CARTESIAN_POINT('',(135.45238,-108.2241520655,1.585)); +#441825 = DIRECTION('',(0.,0.,-1.)); +#441826 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#441827 = ORIENTED_EDGE('',*,*,#441828,.T.); +#441828 = EDGE_CURVE('',#441820,#441829,#441831,.T.); +#441829 = VERTEX_POINT('',#441830); +#441830 = CARTESIAN_POINT('',(135.52738,-108.730256,1.585)); +#441831 = LINE('',#441832,#441833); +#441832 = CARTESIAN_POINT('',(135.52738,-108.224152,1.585)); +#441833 = VECTOR('',#441834,1.); +#441834 = DIRECTION('',(0.,-1.,0.)); +#441835 = ORIENTED_EDGE('',*,*,#441836,.T.); +#441836 = EDGE_CURVE('',#441829,#441837,#441839,.T.); +#441837 = VERTEX_POINT('',#441838); +#441838 = CARTESIAN_POINT('',(135.5559,-108.787298,1.585)); +#441839 = LINE('',#441840,#441841); +#441840 = CARTESIAN_POINT('',(135.52738,-108.730256,1.585)); +#441841 = VECTOR('',#441842,1.); +#441842 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#441843 = ORIENTED_EDGE('',*,*,#441844,.T.); +#441844 = EDGE_CURVE('',#441837,#441845,#441847,.T.); +#441845 = VERTEX_POINT('',#441846); +#441846 = CARTESIAN_POINT('',(135.612942,-108.815819,1.585)); +#441847 = LINE('',#441848,#441849); +#441848 = CARTESIAN_POINT('',(135.5559,-108.787298,1.585)); +#441849 = VECTOR('',#441850,1.); +#441850 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#441851 = ORIENTED_EDGE('',*,*,#441852,.T.); +#441852 = EDGE_CURVE('',#441845,#441853,#441855,.T.); +#441853 = VERTEX_POINT('',#441854); +#441854 = CARTESIAN_POINT('',(135.720389,-108.815819,1.585)); +#441855 = LINE('',#441856,#441857); +#441856 = CARTESIAN_POINT('',(135.612942,-108.815819,1.585)); +#441857 = VECTOR('',#441858,1.); +#441858 = DIRECTION('',(1.,0.,0.)); +#441859 = ORIENTED_EDGE('',*,*,#441860,.T.); +#441860 = EDGE_CURVE('',#441853,#441861,#441863,.T.); +#441861 = VERTEX_POINT('',#441862); +#441862 = CARTESIAN_POINT('',(135.788904,-108.781561,1.585)); +#441863 = LINE('',#441864,#441865); +#441864 = CARTESIAN_POINT('',(135.720389,-108.815819,1.585)); +#441865 = VECTOR('',#441866,1.); +#441866 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#441867 = ORIENTED_EDGE('',*,*,#441868,.T.); +#441868 = EDGE_CURVE('',#441861,#441869,#441871,.T.); +#441869 = VERTEX_POINT('',#441870); +#441870 = CARTESIAN_POINT('',(135.805951,-108.764514,1.585)); +#441871 = LINE('',#441872,#441873); +#441872 = CARTESIAN_POINT('',(135.788904,-108.781561,1.585)); +#441873 = VECTOR('',#441874,1.); +#441874 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#441875 = ORIENTED_EDGE('',*,*,#441876,.T.); +#441876 = EDGE_CURVE('',#441869,#441877,#441879,.T.); +#441877 = VERTEX_POINT('',#441878); +#441878 = CARTESIAN_POINT('',(135.807392,-108.20952,1.585)); +#441879 = LINE('',#441880,#441881); +#441880 = CARTESIAN_POINT('',(135.805951,-108.764514,1.585)); +#441881 = VECTOR('',#441882,1.); +#441882 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#441883 = ORIENTED_EDGE('',*,*,#441884,.T.); +#441884 = EDGE_CURVE('',#441877,#441885,#441887,.T.); +#441885 = VERTEX_POINT('',#441886); +#441886 = CARTESIAN_POINT('',(135.955951,-108.224152,1.585)); +#441887 = CIRCLE('',#441888,7.500006711464E-02); +#441888 = AXIS2_PLACEMENT_3D('',#441889,#441890,#441891); +#441889 = CARTESIAN_POINT('',(135.88095093288,-108.2241519328,1.585)); +#441890 = DIRECTION('',(0.,0.,-1.)); +#441891 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#441892 = ORIENTED_EDGE('',*,*,#441893,.T.); +#441893 = EDGE_CURVE('',#441885,#441894,#441896,.T.); +#441894 = VERTEX_POINT('',#441895); +#441895 = CARTESIAN_POINT('',(135.95451,-108.905451,1.585)); +#441896 = LINE('',#441897,#441898); +#441897 = CARTESIAN_POINT('',(135.955951,-108.224152,1.585)); +#441898 = VECTOR('',#441899,1.); +#441899 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#441900 = ORIENTED_EDGE('',*,*,#441901,.T.); +#441901 = EDGE_CURVE('',#441894,#441902,#441904,.T.); +#441902 = VERTEX_POINT('',#441903); +#441903 = CARTESIAN_POINT('',(135.819881,-108.933777,1.585)); +#441904 = CIRCLE('',#441905,7.472335361469E-02); +#441905 = AXIS2_PLACEMENT_3D('',#441906,#441907,#441908); +#441906 = CARTESIAN_POINT('',(135.88118658714,-108.8910545871,1.585)); +#441907 = DIRECTION('',(-0.,0.,-1.)); +#441908 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#441909 = ORIENTED_EDGE('',*,*,#441910,.T.); +#441910 = EDGE_CURVE('',#441902,#441911,#441913,.T.); +#441911 = VERTEX_POINT('',#441912); +#441912 = CARTESIAN_POINT('',(135.752726,-108.964378,1.585)); +#441913 = LINE('',#441914,#441915); +#441914 = CARTESIAN_POINT('',(135.819881,-108.933777,1.585)); +#441915 = VECTOR('',#441916,1.); +#441916 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#441917 = ORIENTED_EDGE('',*,*,#441918,.T.); +#441918 = EDGE_CURVE('',#441911,#441919,#441921,.T.); +#441919 = VERTEX_POINT('',#441920); +#441920 = CARTESIAN_POINT('',(135.575427,-108.963156,1.585)); +#441921 = LINE('',#441922,#441923); +#441922 = CARTESIAN_POINT('',(135.752726,-108.964378,1.585)); +#441923 = VECTOR('',#441924,1.); +#441924 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#441925 = ORIENTED_EDGE('',*,*,#441926,.T.); +#441926 = EDGE_CURVE('',#441919,#441927,#441929,.T.); +#441927 = VERTEX_POINT('',#441928); +#441928 = CARTESIAN_POINT('',(135.454015,-108.90245,1.585)); +#441929 = LINE('',#441930,#441931); +#441930 = CARTESIAN_POINT('',(135.575427,-108.963156,1.585)); +#441931 = VECTOR('',#441932,1.); +#441932 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#441933 = ORIENTED_EDGE('',*,*,#441934,.T.); +#441934 = EDGE_CURVE('',#441927,#441935,#441937,.T.); +#441935 = VERTEX_POINT('',#441936); +#441936 = CARTESIAN_POINT('',(135.432917,-108.876741,1.585)); +#441937 = LINE('',#441938,#441939); +#441938 = CARTESIAN_POINT('',(135.454015,-108.90245,1.585)); +#441939 = VECTOR('',#441940,1.); +#441940 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#441941 = ORIENTED_EDGE('',*,*,#441942,.T.); +#441942 = EDGE_CURVE('',#441935,#441943,#441945,.T.); +#441943 = VERTEX_POINT('',#441944); +#441944 = CARTESIAN_POINT('',(135.39002,-108.182484,1.585)); +#441945 = CIRCLE('',#441946,0.780471555046); +#441946 = AXIS2_PLACEMENT_3D('',#441947,#441948,#441949); +#441947 = CARTESIAN_POINT('',(136.10883564714,-108.4865233291,1.585)); +#441948 = DIRECTION('',(0.,0.,-1.)); +#441949 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#441950 = ORIENTED_EDGE('',*,*,#441951,.T.); +#441951 = EDGE_CURVE('',#441943,#441818,#441952,.T.); +#441952 = LINE('',#441953,#441954); +#441953 = CARTESIAN_POINT('',(135.39002,-108.182484,1.585)); +#441954 = VECTOR('',#441955,1.); +#441955 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#441956 = PLANE('',#441957); +#441957 = AXIS2_PLACEMENT_3D('',#441958,#441959,#441960); +#441958 = CARTESIAN_POINT('',(0.,0.,1.585)); +#441959 = DIRECTION('',(0.,0.,1.)); +#441960 = DIRECTION('',(1.,0.,-0.)); +#441961 = SHELL_BASED_SURFACE_MODEL('',(#441962)); +#441962 = OPEN_SHELL('',(#441963)); +#441963 = ADVANCED_FACE('',(#441964,#442041),#442118,.T.); +#441964 = FACE_BOUND('',#441965,.F.); +#441965 = EDGE_LOOP('',(#441966,#441977,#441985,#441993,#442002,#442010, + #442019,#442027,#442035)); +#441966 = ORIENTED_EDGE('',*,*,#441967,.T.); +#441967 = EDGE_CURVE('',#441968,#441970,#441972,.T.); +#441968 = VERTEX_POINT('',#441969); +#441969 = CARTESIAN_POINT('',(137.507778,-108.208653,1.585)); +#441970 = VERTEX_POINT('',#441971); +#441971 = CARTESIAN_POINT('',(137.991688,-108.279549,1.585)); +#441972 = CIRCLE('',#441973,0.34461174713); +#441973 = AXIS2_PLACEMENT_3D('',#441974,#441975,#441976); +#441974 = CARTESIAN_POINT('',(137.71453494377,-108.4843499757,1.585)); +#441975 = DIRECTION('',(0.,0.,-1.)); +#441976 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#441977 = ORIENTED_EDGE('',*,*,#441978,.T.); +#441978 = EDGE_CURVE('',#441970,#441979,#441981,.T.); +#441979 = VERTEX_POINT('',#441980); +#441980 = CARTESIAN_POINT('',(138.049749,-108.399996,1.585)); +#441981 = LINE('',#441982,#441983); +#441982 = CARTESIAN_POINT('',(137.991688,-108.279549,1.585)); +#441983 = VECTOR('',#441984,1.); +#441984 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#441985 = ORIENTED_EDGE('',*,*,#441986,.T.); +#441986 = EDGE_CURVE('',#441979,#441987,#441989,.T.); +#441987 = VERTEX_POINT('',#441988); +#441988 = CARTESIAN_POINT('',(138.048527,-108.720152,1.585)); +#441989 = LINE('',#441990,#441991); +#441990 = CARTESIAN_POINT('',(138.049749,-108.399996,1.585)); +#441991 = VECTOR('',#441992,1.); +#441992 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#441993 = ORIENTED_EDGE('',*,*,#441994,.T.); +#441994 = EDGE_CURVE('',#441987,#441995,#441997,.T.); +#441995 = VERTEX_POINT('',#441996); +#441996 = CARTESIAN_POINT('',(137.800346,-108.964378,1.585)); +#441997 = CIRCLE('',#441998,0.348635327447); +#441998 = AXIS2_PLACEMENT_3D('',#441999,#442000,#442001); +#441999 = CARTESIAN_POINT('',(137.71257448129,-108.6269720841,1.585)); +#442000 = DIRECTION('',(0.,0.,-1.)); +#442001 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#442002 = ORIENTED_EDGE('',*,*,#442003,.T.); +#442003 = EDGE_CURVE('',#441995,#442004,#442006,.T.); +#442004 = VERTEX_POINT('',#442005); +#442005 = CARTESIAN_POINT('',(137.623047,-108.963156,1.585)); +#442006 = LINE('',#442007,#442008); +#442007 = CARTESIAN_POINT('',(137.800346,-108.964378,1.585)); +#442008 = VECTOR('',#442009,1.); +#442009 = DIRECTION('',(-0.999976248865,6.892148157133E-03,0.)); +#442010 = ORIENTED_EDGE('',*,*,#442011,.T.); +#442011 = EDGE_CURVE('',#442004,#442012,#442014,.T.); +#442012 = VERTEX_POINT('',#442013); +#442013 = CARTESIAN_POINT('',(137.378822,-108.714974,1.585)); +#442014 = CIRCLE('',#442015,0.348628446662); +#442015 = AXIS2_PLACEMENT_3D('',#442016,#442017,#442018); +#442016 = CARTESIAN_POINT('',(137.71622261322,-108.6272094284,1.585)); +#442017 = DIRECTION('',(0.,0.,-1.)); +#442018 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#442019 = ORIENTED_EDGE('',*,*,#442020,.T.); +#442020 = EDGE_CURVE('',#442012,#442021,#442023,.T.); +#442021 = VERTEX_POINT('',#442022); +#442022 = CARTESIAN_POINT('',(137.380044,-108.394819,1.585)); +#442023 = LINE('',#442024,#442025); +#442024 = CARTESIAN_POINT('',(137.378822,-108.714974,1.585)); +#442025 = VECTOR('',#442026,1.); +#442026 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#442027 = ORIENTED_EDGE('',*,*,#442028,.T.); +#442028 = EDGE_CURVE('',#442021,#442029,#442031,.T.); +#442029 = VERTEX_POINT('',#442030); +#442030 = CARTESIAN_POINT('',(137.442248,-108.272106,1.585)); +#442031 = LINE('',#442032,#442033); +#442032 = CARTESIAN_POINT('',(137.380044,-108.394819,1.585)); +#442033 = VECTOR('',#442034,1.); +#442034 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#442035 = ORIENTED_EDGE('',*,*,#442036,.T.); +#442036 = EDGE_CURVE('',#442029,#441968,#442037,.T.); +#442037 = LINE('',#442038,#442039); +#442038 = CARTESIAN_POINT('',(137.442248,-108.272106,1.585)); +#442039 = VECTOR('',#442040,1.); +#442040 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#442041 = FACE_BOUND('',#442042,.F.); +#442042 = EDGE_LOOP('',(#442043,#442054,#442062,#442070,#442079,#442087, + #442096,#442104,#442112)); +#442043 = ORIENTED_EDGE('',*,*,#442044,.T.); +#442044 = EDGE_CURVE('',#442045,#442047,#442049,.T.); +#442045 = VERTEX_POINT('',#442046); +#442046 = CARTESIAN_POINT('',(137.836525,-108.33341,1.585)); +#442047 = VERTEX_POINT('',#442048); +#442048 = CARTESIAN_POINT('',(137.561639,-108.363817,1.585)); +#442049 = CIRCLE('',#442050,0.198386215365); +#442050 = AXIS2_PLACEMENT_3D('',#442051,#442052,#442053); +#442051 = CARTESIAN_POINT('',(137.71472195783,-108.4900021753,1.585)); +#442052 = DIRECTION('',(0.,0.,1.)); +#442053 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#442054 = ORIENTED_EDGE('',*,*,#442055,.T.); +#442055 = EDGE_CURVE('',#442047,#442056,#442058,.T.); +#442056 = VERTEX_POINT('',#442057); +#442057 = CARTESIAN_POINT('',(137.527381,-108.432333,1.585)); +#442058 = LINE('',#442059,#442060); +#442059 = CARTESIAN_POINT('',(137.561639,-108.363817,1.585)); +#442060 = VECTOR('',#442061,1.); +#442061 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#442062 = ORIENTED_EDGE('',*,*,#442063,.T.); +#442063 = EDGE_CURVE('',#442056,#442064,#442066,.T.); +#442064 = VERTEX_POINT('',#442065); +#442065 = CARTESIAN_POINT('',(137.527381,-108.682637,1.585)); +#442066 = LINE('',#442067,#442068); +#442067 = CARTESIAN_POINT('',(137.527381,-108.432333,1.585)); +#442068 = VECTOR('',#442069,1.); +#442069 = DIRECTION('',(0.,-1.,0.)); +#442070 = ORIENTED_EDGE('',*,*,#442071,.T.); +#442071 = EDGE_CURVE('',#442064,#442072,#442074,.T.); +#442072 = VERTEX_POINT('',#442073); +#442073 = CARTESIAN_POINT('',(137.660562,-108.815819,1.585)); +#442074 = CIRCLE('',#442075,0.186867373533); +#442075 = AXIS2_PLACEMENT_3D('',#442076,#442077,#442078); +#442076 = CARTESIAN_POINT('',(137.70810071388,-108.635099643,1.585)); +#442077 = DIRECTION('',(0.,0.,1.)); +#442078 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#442079 = ORIENTED_EDGE('',*,*,#442080,.T.); +#442080 = EDGE_CURVE('',#442072,#442081,#442083,.T.); +#442081 = VERTEX_POINT('',#442082); +#442082 = CARTESIAN_POINT('',(137.768009,-108.815819,1.585)); +#442083 = LINE('',#442084,#442085); +#442084 = CARTESIAN_POINT('',(137.660562,-108.815819,1.585)); +#442085 = VECTOR('',#442086,1.); +#442086 = DIRECTION('',(1.,0.,0.)); +#442087 = ORIENTED_EDGE('',*,*,#442088,.T.); +#442088 = EDGE_CURVE('',#442081,#442089,#442091,.T.); +#442089 = VERTEX_POINT('',#442090); +#442090 = CARTESIAN_POINT('',(137.90119,-108.682637,1.585)); +#442091 = CIRCLE('',#442092,0.186867760544); +#442092 = AXIS2_PLACEMENT_3D('',#442093,#442094,#442095); +#442093 = CARTESIAN_POINT('',(137.72046996928,-108.6350993262,1.585)); +#442094 = DIRECTION('',(0.,0.,1.)); +#442095 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#442096 = ORIENTED_EDGE('',*,*,#442097,.T.); +#442097 = EDGE_CURVE('',#442089,#442098,#442100,.T.); +#442098 = VERTEX_POINT('',#442099); +#442099 = CARTESIAN_POINT('',(137.90119,-108.432333,1.585)); +#442100 = LINE('',#442101,#442102); +#442101 = CARTESIAN_POINT('',(137.90119,-108.682637,1.585)); +#442102 = VECTOR('',#442103,1.); +#442103 = DIRECTION('',(0.,1.,0.)); +#442104 = ORIENTED_EDGE('',*,*,#442105,.T.); +#442105 = EDGE_CURVE('',#442098,#442106,#442108,.T.); +#442106 = VERTEX_POINT('',#442107); +#442107 = CARTESIAN_POINT('',(137.866932,-108.363817,1.585)); +#442108 = LINE('',#442109,#442110); +#442109 = CARTESIAN_POINT('',(137.90119,-108.432333,1.585)); +#442110 = VECTOR('',#442111,1.); +#442111 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#442112 = ORIENTED_EDGE('',*,*,#442113,.T.); +#442113 = EDGE_CURVE('',#442106,#442045,#442114,.T.); +#442114 = LINE('',#442115,#442116); +#442115 = CARTESIAN_POINT('',(137.866932,-108.363817,1.585)); +#442116 = VECTOR('',#442117,1.); +#442117 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#442118 = PLANE('',#442119); +#442119 = AXIS2_PLACEMENT_3D('',#442120,#442121,#442122); +#442120 = CARTESIAN_POINT('',(0.,0.,1.585)); +#442121 = DIRECTION('',(0.,0.,1.)); +#442122 = DIRECTION('',(1.,0.,-0.)); +#442123 = SHELL_BASED_SURFACE_MODEL('',(#442124)); +#442124 = OPEN_SHELL('',(#442125)); +#442125 = ADVANCED_FACE('',(#442126),#442284,.T.); +#442126 = FACE_BOUND('',#442127,.F.); +#442127 = EDGE_LOOP('',(#442128,#442139,#442147,#442155,#442163,#442171, + #442180,#442188,#442197,#442205,#442213,#442221,#442229,#442237, + #442245,#442253,#442262,#442270,#442278)); +#442128 = ORIENTED_EDGE('',*,*,#442129,.T.); +#442129 = EDGE_CURVE('',#442130,#442132,#442134,.T.); +#442130 = VERTEX_POINT('',#442131); +#442131 = CARTESIAN_POINT('',(138.363094,-108.161792,1.585)); +#442132 = VERTEX_POINT('',#442133); +#442133 = CARTESIAN_POINT('',(138.465831,-108.181193,1.585)); +#442134 = CIRCLE('',#442135,7.44076017233E-02); +#442135 = AXIS2_PLACEMENT_3D('',#442136,#442137,#442138); +#442136 = CARTESIAN_POINT('',(138.40463706572,-108.223522583,1.585)); +#442137 = DIRECTION('',(0.,0.,-1.)); +#442138 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#442139 = ORIENTED_EDGE('',*,*,#442140,.T.); +#442140 = EDGE_CURVE('',#442132,#442141,#442143,.T.); +#442141 = VERTEX_POINT('',#442142); +#442142 = CARTESIAN_POINT('',(138.532987,-108.150593,1.585)); +#442143 = LINE('',#442144,#442145); +#442144 = CARTESIAN_POINT('',(138.465831,-108.181193,1.585)); +#442145 = VECTOR('',#442146,1.); +#442146 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#442147 = ORIENTED_EDGE('',*,*,#442148,.T.); +#442148 = EDGE_CURVE('',#442141,#442149,#442151,.T.); +#442149 = VERTEX_POINT('',#442150); +#442150 = CARTESIAN_POINT('',(138.705108,-108.150593,1.585)); +#442151 = LINE('',#442152,#442153); +#442152 = CARTESIAN_POINT('',(138.532987,-108.150593,1.585)); +#442153 = VECTOR('',#442154,1.); +#442154 = DIRECTION('',(1.,0.,0.)); +#442155 = ORIENTED_EDGE('',*,*,#442156,.T.); +#442156 = EDGE_CURVE('',#442149,#442157,#442159,.T.); +#442157 = VERTEX_POINT('',#442158); +#442158 = CARTESIAN_POINT('',(138.831698,-108.212521,1.585)); +#442159 = LINE('',#442160,#442161); +#442160 = CARTESIAN_POINT('',(138.705108,-108.150593,1.585)); +#442161 = VECTOR('',#442162,1.); +#442162 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#442163 = ORIENTED_EDGE('',*,*,#442164,.T.); +#442164 = EDGE_CURVE('',#442157,#442165,#442167,.T.); +#442165 = VERTEX_POINT('',#442166); +#442166 = CARTESIAN_POINT('',(138.852796,-108.23823,1.585)); +#442167 = LINE('',#442168,#442169); +#442168 = CARTESIAN_POINT('',(138.831698,-108.212521,1.585)); +#442169 = VECTOR('',#442170,1.); +#442170 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#442171 = ORIENTED_EDGE('',*,*,#442172,.T.); +#442172 = EDGE_CURVE('',#442165,#442173,#442175,.T.); +#442173 = VERTEX_POINT('',#442174); +#442174 = CARTESIAN_POINT('',(138.895693,-108.932487,1.585)); +#442175 = CIRCLE('',#442176,0.780466291445); +#442176 = AXIS2_PLACEMENT_3D('',#442177,#442178,#442179); +#442177 = CARTESIAN_POINT('',(138.1768832213,-108.6284473082,1.585)); +#442178 = DIRECTION('',(0.,0.,-1.)); +#442179 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#442180 = ORIENTED_EDGE('',*,*,#442181,.T.); +#442181 = EDGE_CURVE('',#442173,#442182,#442184,.T.); +#442182 = VERTEX_POINT('',#442183); +#442183 = CARTESIAN_POINT('',(138.875001,-108.953179,1.585)); +#442184 = LINE('',#442185,#442186); +#442185 = CARTESIAN_POINT('',(138.895693,-108.932487,1.585)); +#442186 = VECTOR('',#442187,1.); +#442187 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#442188 = ORIENTED_EDGE('',*,*,#442189,.T.); +#442189 = EDGE_CURVE('',#442182,#442190,#442192,.T.); +#442190 = VERTEX_POINT('',#442191); +#442191 = CARTESIAN_POINT('',(138.758333,-108.890819,1.585)); +#442192 = CIRCLE('',#442193,7.499979580333E-02); +#442193 = AXIS2_PLACEMENT_3D('',#442194,#442195,#442196); +#442194 = CARTESIAN_POINT('',(138.8333327958,-108.8908193164,1.585)); +#442195 = DIRECTION('',(-0.,0.,-1.)); +#442196 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#442197 = ORIENTED_EDGE('',*,*,#442198,.T.); +#442198 = EDGE_CURVE('',#442190,#442199,#442201,.T.); +#442199 = VERTEX_POINT('',#442200); +#442200 = CARTESIAN_POINT('',(138.758333,-108.384714,1.585)); +#442201 = LINE('',#442202,#442203); +#442202 = CARTESIAN_POINT('',(138.758333,-108.890819,1.585)); +#442203 = VECTOR('',#442204,1.); +#442204 = DIRECTION('',(0.,1.,0.)); +#442205 = ORIENTED_EDGE('',*,*,#442206,.T.); +#442206 = EDGE_CURVE('',#442199,#442207,#442209,.T.); +#442207 = VERTEX_POINT('',#442208); +#442208 = CARTESIAN_POINT('',(138.729812,-108.327672,1.585)); +#442209 = LINE('',#442210,#442211); +#442210 = CARTESIAN_POINT('',(138.758333,-108.384714,1.585)); +#442211 = VECTOR('',#442212,1.); +#442212 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#442213 = ORIENTED_EDGE('',*,*,#442214,.T.); +#442214 = EDGE_CURVE('',#442207,#442215,#442217,.T.); +#442215 = VERTEX_POINT('',#442216); +#442216 = CARTESIAN_POINT('',(138.672771,-108.299152,1.585)); +#442217 = LINE('',#442218,#442219); +#442218 = CARTESIAN_POINT('',(138.729812,-108.327672,1.585)); +#442219 = VECTOR('',#442220,1.); +#442220 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#442221 = ORIENTED_EDGE('',*,*,#442222,.T.); +#442222 = EDGE_CURVE('',#442215,#442223,#442225,.T.); +#442223 = VERTEX_POINT('',#442224); +#442224 = CARTESIAN_POINT('',(138.565324,-108.299152,1.585)); +#442225 = LINE('',#442226,#442227); +#442226 = CARTESIAN_POINT('',(138.672771,-108.299152,1.585)); +#442227 = VECTOR('',#442228,1.); +#442228 = DIRECTION('',(-1.,0.,0.)); +#442229 = ORIENTED_EDGE('',*,*,#442230,.T.); +#442230 = EDGE_CURVE('',#442223,#442231,#442233,.T.); +#442231 = VERTEX_POINT('',#442232); +#442232 = CARTESIAN_POINT('',(138.496808,-108.33341,1.585)); +#442233 = LINE('',#442234,#442235); +#442234 = CARTESIAN_POINT('',(138.565324,-108.299152,1.585)); +#442235 = VECTOR('',#442236,1.); +#442236 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#442237 = ORIENTED_EDGE('',*,*,#442238,.T.); +#442238 = EDGE_CURVE('',#442231,#442239,#442241,.T.); +#442239 = VERTEX_POINT('',#442240); +#442240 = CARTESIAN_POINT('',(138.479762,-108.350456,1.585)); +#442241 = LINE('',#442242,#442243); +#442242 = CARTESIAN_POINT('',(138.496808,-108.33341,1.585)); +#442243 = VECTOR('',#442244,1.); +#442244 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#442245 = ORIENTED_EDGE('',*,*,#442246,.T.); +#442246 = EDGE_CURVE('',#442239,#442247,#442249,.T.); +#442247 = VERTEX_POINT('',#442248); +#442248 = CARTESIAN_POINT('',(138.478321,-108.905451,1.585)); +#442249 = LINE('',#442250,#442251); +#442250 = CARTESIAN_POINT('',(138.479762,-108.350456,1.585)); +#442251 = VECTOR('',#442252,1.); +#442252 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#442253 = ORIENTED_EDGE('',*,*,#442254,.T.); +#442254 = EDGE_CURVE('',#442247,#442255,#442257,.T.); +#442255 = VERTEX_POINT('',#442256); +#442256 = CARTESIAN_POINT('',(138.329762,-108.890819,1.585)); +#442257 = CIRCLE('',#442258,7.500006711465E-02); +#442258 = AXIS2_PLACEMENT_3D('',#442259,#442260,#442261); +#442259 = CARTESIAN_POINT('',(138.40476206711,-108.8908190671,1.585)); +#442260 = DIRECTION('',(-0.,0.,-1.)); +#442261 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#442262 = ORIENTED_EDGE('',*,*,#442263,.T.); +#442263 = EDGE_CURVE('',#442255,#442264,#442266,.T.); +#442264 = VERTEX_POINT('',#442265); +#442265 = CARTESIAN_POINT('',(138.331203,-108.20952,1.585)); +#442266 = LINE('',#442267,#442268); +#442267 = CARTESIAN_POINT('',(138.329762,-108.890819,1.585)); +#442268 = VECTOR('',#442269,1.); +#442269 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#442270 = ORIENTED_EDGE('',*,*,#442271,.T.); +#442271 = EDGE_CURVE('',#442264,#442272,#442274,.T.); +#442272 = VERTEX_POINT('',#442273); +#442273 = CARTESIAN_POINT('',(138.342402,-108.182484,1.585)); +#442274 = LINE('',#442275,#442276); +#442275 = CARTESIAN_POINT('',(138.331203,-108.20952,1.585)); +#442276 = VECTOR('',#442277,1.); +#442277 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#442278 = ORIENTED_EDGE('',*,*,#442279,.T.); +#442279 = EDGE_CURVE('',#442272,#442130,#442280,.T.); +#442280 = LINE('',#442281,#442282); +#442281 = CARTESIAN_POINT('',(138.342402,-108.182484,1.585)); +#442282 = VECTOR('',#442283,1.); +#442283 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#442284 = PLANE('',#442285); +#442285 = AXIS2_PLACEMENT_3D('',#442286,#442287,#442288); +#442286 = CARTESIAN_POINT('',(0.,0.,1.585)); +#442287 = DIRECTION('',(0.,0.,1.)); +#442288 = DIRECTION('',(1.,0.,-0.)); +#442289 = SHELL_BASED_SURFACE_MODEL('',(#442290)); +#442290 = OPEN_SHELL('',(#442291)); +#442291 = ADVANCED_FACE('',(#442292,#442410,#442477),#442529,.T.); +#442292 = FACE_BOUND('',#442293,.F.); +#442293 = EDGE_LOOP('',(#442294,#442305,#442313,#442322,#442330,#442338, + #442346,#442354,#442362,#442371,#442379,#442388,#442396,#442404)); +#442294 = ORIENTED_EDGE('',*,*,#442295,.T.); +#442295 = EDGE_CURVE('',#442296,#442298,#442300,.T.); +#442296 = VERTEX_POINT('',#442297); +#442297 = CARTESIAN_POINT('',(144.628821,-107.876187,1.585)); +#442298 = VERTEX_POINT('',#442299); +#442299 = CARTESIAN_POINT('',(144.70238,-107.815819,1.585)); +#442300 = CIRCLE('',#442301,7.500074938989E-02); +#442301 = AXIS2_PLACEMENT_3D('',#442302,#442303,#442304); +#442302 = CARTESIAN_POINT('',(144.70238046611,-107.8908197493,1.585)); +#442303 = DIRECTION('',(0.,0.,-1.)); +#442304 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#442305 = ORIENTED_EDGE('',*,*,#442306,.T.); +#442306 = EDGE_CURVE('',#442298,#442307,#442309,.T.); +#442307 = VERTEX_POINT('',#442308); +#442308 = CARTESIAN_POINT('',(145.050345,-107.81726,1.585)); +#442309 = LINE('',#442310,#442311); +#442310 = CARTESIAN_POINT('',(144.70238,-107.815819,1.585)); +#442311 = VECTOR('',#442312,1.); +#442312 = DIRECTION('',(0.999991425254,-4.141185589905E-03,0.)); +#442313 = ORIENTED_EDGE('',*,*,#442314,.T.); +#442314 = EDGE_CURVE('',#442307,#442315,#442317,.T.); +#442315 = VERTEX_POINT('',#442316); +#442316 = CARTESIAN_POINT('',(145.299748,-108.066663,1.585)); +#442317 = CIRCLE('',#442318,0.347870264855); +#442318 = AXIS2_PLACEMENT_3D('',#442319,#442320,#442321); +#442319 = CARTESIAN_POINT('',(144.96301726502,-108.1539907349,1.585)); +#442320 = DIRECTION('',(0.,0.,-1.)); +#442321 = DIRECTION('',(0.251035353678,0.967977918758,0.)); +#442322 = ORIENTED_EDGE('',*,*,#442323,.T.); +#442323 = EDGE_CURVE('',#442315,#442324,#442326,.T.); +#442324 = VERTEX_POINT('',#442325); +#442325 = CARTESIAN_POINT('',(145.298526,-108.196343,1.585)); +#442326 = LINE('',#442327,#442328); +#442327 = CARTESIAN_POINT('',(145.299748,-108.066663,1.585)); +#442328 = VECTOR('',#442329,1.); +#442329 = DIRECTION('',(-9.422777212105E-03,-0.999955604649,0.)); +#442330 = ORIENTED_EDGE('',*,*,#442331,.T.); +#442331 = EDGE_CURVE('',#442324,#442332,#442334,.T.); +#442332 = VERTEX_POINT('',#442333); +#442333 = CARTESIAN_POINT('',(145.236321,-108.319054,1.585)); +#442334 = LINE('',#442335,#442336); +#442335 = CARTESIAN_POINT('',(145.298526,-108.196343,1.585)); +#442336 = VECTOR('',#442337,1.); +#442337 = DIRECTION('',(-0.45214655154,-0.891943661859,0.)); +#442338 = ORIENTED_EDGE('',*,*,#442339,.T.); +#442339 = EDGE_CURVE('',#442332,#442340,#442342,.T.); +#442340 = VERTEX_POINT('',#442341); +#442341 = CARTESIAN_POINT('',(145.209644,-108.346762,1.585)); +#442342 = LINE('',#442343,#442344); +#442343 = CARTESIAN_POINT('',(145.236321,-108.319054,1.585)); +#442344 = VECTOR('',#442345,1.); +#442345 = DIRECTION('',(-0.693577232498,-0.720382275296,0.)); +#442346 = ORIENTED_EDGE('',*,*,#442347,.T.); +#442347 = EDGE_CURVE('',#442340,#442348,#442350,.T.); +#442348 = VERTEX_POINT('',#442349); +#442349 = CARTESIAN_POINT('',(145.231603,-108.361595,1.585)); +#442350 = LINE('',#442351,#442352); +#442351 = CARTESIAN_POINT('',(145.209644,-108.346762,1.585)); +#442352 = VECTOR('',#442353,1.); +#442353 = DIRECTION('',(0.82866182355,-0.55974957096,0.)); +#442354 = ORIENTED_EDGE('',*,*,#442355,.T.); +#442355 = EDGE_CURVE('',#442348,#442356,#442358,.T.); +#442356 = VERTEX_POINT('',#442357); +#442357 = CARTESIAN_POINT('',(145.293271,-108.428706,1.585)); +#442358 = LINE('',#442359,#442360); +#442359 = CARTESIAN_POINT('',(145.231603,-108.361595,1.585)); +#442360 = VECTOR('',#442361,1.); +#442361 = DIRECTION('',(0.676615964248,-0.736336089652,0.)); +#442362 = ORIENTED_EDGE('',*,*,#442363,.T.); +#442363 = EDGE_CURVE('',#442356,#442364,#442366,.T.); +#442364 = VERTEX_POINT('',#442365); +#442365 = CARTESIAN_POINT('',(145.28394,-108.842863,1.585)); +#442366 = CIRCLE('',#442367,0.341850333486); +#442367 = AXIS2_PLACEMENT_3D('',#442368,#442369,#442370); +#442368 = CARTESIAN_POINT('',(145.01672159864,-108.6296589276,1.585)); +#442369 = DIRECTION('',(0.,0.,-1.)); +#442370 = DIRECTION('',(0.808978006641,0.587838910562,0.)); +#442371 = ORIENTED_EDGE('',*,*,#442372,.T.); +#442372 = EDGE_CURVE('',#442364,#442373,#442375,.T.); +#442373 = VERTEX_POINT('',#442374); +#442374 = CARTESIAN_POINT('',(145.21841,-108.906317,1.585)); +#442375 = LINE('',#442376,#442377); +#442376 = CARTESIAN_POINT('',(145.28394,-108.842863,1.585)); +#442377 = VECTOR('',#442378,1.); +#442378 = DIRECTION('',(-0.718394634729,-0.695635787458,0.)); +#442379 = ORIENTED_EDGE('',*,*,#442380,.T.); +#442380 = EDGE_CURVE('',#442373,#442381,#442383,.T.); +#442381 = VERTEX_POINT('',#442382); +#442382 = CARTESIAN_POINT('',(144.660712,-108.953179,1.585)); +#442383 = CIRCLE('',#442384,0.612118292739); +#442384 = AXIS2_PLACEMENT_3D('',#442385,#442386,#442387); +#442385 = CARTESIAN_POINT('',(144.89397614383,-108.3872491072,1.585)); +#442386 = DIRECTION('',(-0.,0.,-1.)); +#442387 = DIRECTION('',(0.530018233421,-0.847986245314,-0.)); +#442388 = ORIENTED_EDGE('',*,*,#442389,.T.); +#442389 = EDGE_CURVE('',#442381,#442390,#442392,.T.); +#442390 = VERTEX_POINT('',#442391); +#442391 = CARTESIAN_POINT('',(144.64002,-108.932487,1.585)); +#442392 = LINE('',#442393,#442394); +#442393 = CARTESIAN_POINT('',(144.660712,-108.953179,1.585)); +#442394 = VECTOR('',#442395,1.); +#442395 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#442396 = ORIENTED_EDGE('',*,*,#442397,.T.); +#442397 = EDGE_CURVE('',#442390,#442398,#442400,.T.); +#442398 = VERTEX_POINT('',#442399); +#442399 = CARTESIAN_POINT('',(144.62738,-108.890819,1.585)); +#442400 = LINE('',#442401,#442402); +#442401 = CARTESIAN_POINT('',(144.64002,-108.932487,1.585)); +#442402 = VECTOR('',#442403,1.); +#442403 = DIRECTION('',(-0.29028783999,0.956939376321,0.)); +#442404 = ORIENTED_EDGE('',*,*,#442405,.T.); +#442405 = EDGE_CURVE('',#442398,#442296,#442406,.T.); +#442406 = LINE('',#442407,#442408); +#442407 = CARTESIAN_POINT('',(144.62738,-108.890819,1.585)); +#442408 = VECTOR('',#442409,1.); +#442409 = DIRECTION('',(1.420217918158E-03,0.99999899149,0.)); +#442410 = FACE_BOUND('',#442411,.F.); +#442411 = EDGE_LOOP('',(#442412,#442422,#442430,#442438,#442446,#442455, + #442463,#442471)); +#442412 = ORIENTED_EDGE('',*,*,#442413,.T.); +#442413 = EDGE_CURVE('',#442414,#442416,#442418,.T.); +#442414 = VERTEX_POINT('',#442415); +#442415 = CARTESIAN_POINT('',(145.138056,-108.48018,1.585)); +#442416 = VERTEX_POINT('',#442417); +#442417 = CARTESIAN_POINT('',(145.023543,-108.442009,1.585)); +#442418 = LINE('',#442419,#442420); +#442419 = CARTESIAN_POINT('',(145.138056,-108.48018,1.585)); +#442420 = VECTOR('',#442421,1.); +#442421 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#442422 = ORIENTED_EDGE('',*,*,#442423,.T.); +#442423 = EDGE_CURVE('',#442416,#442424,#442426,.T.); +#442424 = VERTEX_POINT('',#442425); +#442425 = CARTESIAN_POINT('',(144.77738,-108.442009,1.585)); +#442426 = LINE('',#442427,#442428); +#442427 = CARTESIAN_POINT('',(145.023543,-108.442009,1.585)); +#442428 = VECTOR('',#442429,1.); +#442429 = DIRECTION('',(-1.,0.,0.)); +#442430 = ORIENTED_EDGE('',*,*,#442431,.T.); +#442431 = EDGE_CURVE('',#442424,#442432,#442434,.T.); +#442432 = VERTEX_POINT('',#442433); +#442433 = CARTESIAN_POINT('',(144.77738,-108.815819,1.585)); +#442434 = LINE('',#442435,#442436); +#442435 = CARTESIAN_POINT('',(144.77738,-108.442009,1.585)); +#442436 = VECTOR('',#442437,1.); +#442437 = DIRECTION('',(0.,-1.,0.)); +#442438 = ORIENTED_EDGE('',*,*,#442439,.T.); +#442439 = EDGE_CURVE('',#442432,#442440,#442442,.T.); +#442440 = VERTEX_POINT('',#442441); +#442441 = CARTESIAN_POINT('',(145.065627,-108.815819,1.585)); +#442442 = LINE('',#442443,#442444); +#442443 = CARTESIAN_POINT('',(144.77738,-108.815819,1.585)); +#442444 = VECTOR('',#442445,1.); +#442445 = DIRECTION('',(1.,0.,0.)); +#442446 = ORIENTED_EDGE('',*,*,#442447,.T.); +#442447 = EDGE_CURVE('',#442440,#442448,#442450,.T.); +#442448 = VERTEX_POINT('',#442449); +#442449 = CARTESIAN_POINT('',(145.198808,-108.682637,1.585)); +#442450 = CIRCLE('',#442451,0.186867760544); +#442451 = AXIS2_PLACEMENT_3D('',#442452,#442453,#442454); +#442452 = CARTESIAN_POINT('',(145.01808796928,-108.6350993262,1.585)); +#442453 = DIRECTION('',(0.,0.,1.)); +#442454 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#442455 = ORIENTED_EDGE('',*,*,#442456,.T.); +#442456 = EDGE_CURVE('',#442448,#442457,#442459,.T.); +#442457 = VERTEX_POINT('',#442458); +#442458 = CARTESIAN_POINT('',(145.198808,-108.57519,1.585)); +#442459 = LINE('',#442460,#442461); +#442460 = CARTESIAN_POINT('',(145.198808,-108.682637,1.585)); +#442461 = VECTOR('',#442462,1.); +#442462 = DIRECTION('',(0.,1.,0.)); +#442463 = ORIENTED_EDGE('',*,*,#442464,.T.); +#442464 = EDGE_CURVE('',#442457,#442465,#442467,.T.); +#442465 = VERTEX_POINT('',#442466); +#442466 = CARTESIAN_POINT('',(145.16455,-108.506674,1.585)); +#442467 = LINE('',#442468,#442469); +#442468 = CARTESIAN_POINT('',(145.198808,-108.57519,1.585)); +#442469 = VECTOR('',#442470,1.); +#442470 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#442471 = ORIENTED_EDGE('',*,*,#442472,.T.); +#442472 = EDGE_CURVE('',#442465,#442414,#442473,.T.); +#442473 = LINE('',#442474,#442475); +#442474 = CARTESIAN_POINT('',(145.16455,-108.506674,1.585)); +#442475 = VECTOR('',#442476,1.); +#442476 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#442477 = FACE_BOUND('',#442478,.F.); +#442478 = EDGE_LOOP('',(#442479,#442490,#442498,#442506,#442514,#442523) + ); +#442479 = ORIENTED_EDGE('',*,*,#442480,.T.); +#442480 = EDGE_CURVE('',#442481,#442483,#442485,.T.); +#442481 = VERTEX_POINT('',#442482); +#442482 = CARTESIAN_POINT('',(145.151189,-108.099,1.585)); +#442483 = VERTEX_POINT('',#442484); +#442484 = CARTESIAN_POINT('',(145.018008,-107.965819,1.585)); +#442485 = CIRCLE('',#442486,0.18686440374); +#442486 = AXIS2_PLACEMENT_3D('',#442487,#442488,#442489); +#442487 = CARTESIAN_POINT('',(144.970472,-108.146536,1.585)); +#442488 = DIRECTION('',(0.,0.,1.)); +#442489 = DIRECTION('',(0.967102328658,0.254387668537,-0.)); +#442490 = ORIENTED_EDGE('',*,*,#442491,.T.); +#442491 = EDGE_CURVE('',#442483,#442492,#442494,.T.); +#442492 = VERTEX_POINT('',#442493); +#442493 = CARTESIAN_POINT('',(144.77738,-107.965819,1.585)); +#442494 = LINE('',#442495,#442496); +#442495 = CARTESIAN_POINT('',(145.018008,-107.965819,1.585)); +#442496 = VECTOR('',#442497,1.); +#442497 = DIRECTION('',(-1.,0.,0.)); +#442498 = ORIENTED_EDGE('',*,*,#442499,.T.); +#442499 = EDGE_CURVE('',#442492,#442500,#442502,.T.); +#442500 = VERTEX_POINT('',#442501); +#442501 = CARTESIAN_POINT('',(144.77738,-108.292009,1.585)); +#442502 = LINE('',#442503,#442504); +#442503 = CARTESIAN_POINT('',(144.77738,-107.965819,1.585)); +#442504 = VECTOR('',#442505,1.); +#442505 = DIRECTION('',(0.,-1.,0.)); +#442506 = ORIENTED_EDGE('',*,*,#442507,.T.); +#442507 = EDGE_CURVE('',#442500,#442508,#442510,.T.); +#442508 = VERTEX_POINT('',#442509); +#442509 = CARTESIAN_POINT('',(145.018008,-108.292009,1.585)); +#442510 = LINE('',#442511,#442512); +#442511 = CARTESIAN_POINT('',(144.77738,-108.292009,1.585)); +#442512 = VECTOR('',#442513,1.); +#442513 = DIRECTION('',(1.,0.,0.)); +#442514 = ORIENTED_EDGE('',*,*,#442515,.T.); +#442515 = EDGE_CURVE('',#442508,#442516,#442518,.T.); +#442516 = VERTEX_POINT('',#442517); +#442517 = CARTESIAN_POINT('',(145.151189,-108.158828,1.585)); +#442518 = CIRCLE('',#442519,0.18686440374); +#442519 = AXIS2_PLACEMENT_3D('',#442520,#442521,#442522); +#442520 = CARTESIAN_POINT('',(144.970472,-108.111292,1.585)); +#442521 = DIRECTION('',(0.,0.,1.)); +#442522 = DIRECTION('',(0.254387668537,-0.967102328658,0.)); +#442523 = ORIENTED_EDGE('',*,*,#442524,.T.); +#442524 = EDGE_CURVE('',#442516,#442481,#442525,.T.); +#442525 = LINE('',#442526,#442527); +#442526 = CARTESIAN_POINT('',(145.151189,-108.158828,1.585)); +#442527 = VECTOR('',#442528,1.); +#442528 = DIRECTION('',(0.,1.,0.)); +#442529 = PLANE('',#442530); +#442530 = AXIS2_PLACEMENT_3D('',#442531,#442532,#442533); +#442531 = CARTESIAN_POINT('',(0.,0.,1.585)); +#442532 = DIRECTION('',(0.,0.,1.)); +#442533 = DIRECTION('',(1.,0.,-0.)); +#442534 = SHELL_BASED_SURFACE_MODEL('',(#442535)); +#442535 = OPEN_SHELL('',(#442536)); +#442536 = ADVANCED_FACE('',(#442537),#442679,.T.); +#442537 = FACE_BOUND('',#442538,.F.); +#442538 = EDGE_LOOP('',(#442539,#442550,#442558,#442566,#442574,#442582, + #442590,#442598,#442606,#442615,#442623,#442632,#442640,#442648, + #442656,#442664,#442673)); +#442539 = ORIENTED_EDGE('',*,*,#442540,.T.); +#442540 = EDGE_CURVE('',#442541,#442543,#442545,.T.); +#442541 = VERTEX_POINT('',#442542); +#442542 = CARTESIAN_POINT('',(145.660712,-108.161792,1.585)); +#442543 = VERTEX_POINT('',#442544); +#442544 = CARTESIAN_POINT('',(145.77738,-108.224152,1.585)); +#442545 = CIRCLE('',#442546,7.500000000002E-02); +#442546 = AXIS2_PLACEMENT_3D('',#442547,#442548,#442549); +#442547 = CARTESIAN_POINT('',(145.70238,-108.2241520655,1.585)); +#442548 = DIRECTION('',(0.,0.,-1.)); +#442549 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#442550 = ORIENTED_EDGE('',*,*,#442551,.T.); +#442551 = EDGE_CURVE('',#442543,#442552,#442554,.T.); +#442552 = VERTEX_POINT('',#442553); +#442553 = CARTESIAN_POINT('',(145.77738,-108.730256,1.585)); +#442554 = LINE('',#442555,#442556); +#442555 = CARTESIAN_POINT('',(145.77738,-108.224152,1.585)); +#442556 = VECTOR('',#442557,1.); +#442557 = DIRECTION('',(0.,-1.,0.)); +#442558 = ORIENTED_EDGE('',*,*,#442559,.T.); +#442559 = EDGE_CURVE('',#442552,#442560,#442562,.T.); +#442560 = VERTEX_POINT('',#442561); +#442561 = CARTESIAN_POINT('',(145.8059,-108.787298,1.585)); +#442562 = LINE('',#442563,#442564); +#442563 = CARTESIAN_POINT('',(145.77738,-108.730256,1.585)); +#442564 = VECTOR('',#442565,1.); +#442565 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#442566 = ORIENTED_EDGE('',*,*,#442567,.T.); +#442567 = EDGE_CURVE('',#442560,#442568,#442570,.T.); +#442568 = VERTEX_POINT('',#442569); +#442569 = CARTESIAN_POINT('',(145.862942,-108.815819,1.585)); +#442570 = LINE('',#442571,#442572); +#442571 = CARTESIAN_POINT('',(145.8059,-108.787298,1.585)); +#442572 = VECTOR('',#442573,1.); +#442573 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#442574 = ORIENTED_EDGE('',*,*,#442575,.T.); +#442575 = EDGE_CURVE('',#442568,#442576,#442578,.T.); +#442576 = VERTEX_POINT('',#442577); +#442577 = CARTESIAN_POINT('',(145.970389,-108.815819,1.585)); +#442578 = LINE('',#442579,#442580); +#442579 = CARTESIAN_POINT('',(145.862942,-108.815819,1.585)); +#442580 = VECTOR('',#442581,1.); +#442581 = DIRECTION('',(1.,0.,0.)); +#442582 = ORIENTED_EDGE('',*,*,#442583,.T.); +#442583 = EDGE_CURVE('',#442576,#442584,#442586,.T.); +#442584 = VERTEX_POINT('',#442585); +#442585 = CARTESIAN_POINT('',(146.038904,-108.781561,1.585)); +#442586 = LINE('',#442587,#442588); +#442587 = CARTESIAN_POINT('',(145.970389,-108.815819,1.585)); +#442588 = VECTOR('',#442589,1.); +#442589 = DIRECTION('',(0.894424580098,0.447218817266,0.)); +#442590 = ORIENTED_EDGE('',*,*,#442591,.T.); +#442591 = EDGE_CURVE('',#442584,#442592,#442594,.T.); +#442592 = VERTEX_POINT('',#442593); +#442593 = CARTESIAN_POINT('',(146.055951,-108.764514,1.585)); +#442594 = LINE('',#442595,#442596); +#442595 = CARTESIAN_POINT('',(146.038904,-108.781561,1.585)); +#442596 = VECTOR('',#442597,1.); +#442597 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#442598 = ORIENTED_EDGE('',*,*,#442599,.T.); +#442599 = EDGE_CURVE('',#442592,#442600,#442602,.T.); +#442600 = VERTEX_POINT('',#442601); +#442601 = CARTESIAN_POINT('',(146.057392,-108.20952,1.585)); +#442602 = LINE('',#442603,#442604); +#442603 = CARTESIAN_POINT('',(146.055951,-108.764514,1.585)); +#442604 = VECTOR('',#442605,1.); +#442605 = DIRECTION('',(2.5964157141E-03,0.999996629307,0.)); +#442606 = ORIENTED_EDGE('',*,*,#442607,.T.); +#442607 = EDGE_CURVE('',#442600,#442608,#442610,.T.); +#442608 = VERTEX_POINT('',#442609); +#442609 = CARTESIAN_POINT('',(146.205951,-108.224152,1.585)); +#442610 = CIRCLE('',#442611,7.500006711464E-02); +#442611 = AXIS2_PLACEMENT_3D('',#442612,#442613,#442614); +#442612 = CARTESIAN_POINT('',(146.13095093288,-108.2241519328,1.585)); +#442613 = DIRECTION('',(0.,0.,-1.)); +#442614 = DIRECTION('',(-0.980784894138,0.195092263891,0.)); +#442615 = ORIENTED_EDGE('',*,*,#442616,.T.); +#442616 = EDGE_CURVE('',#442608,#442617,#442619,.T.); +#442617 = VERTEX_POINT('',#442618); +#442618 = CARTESIAN_POINT('',(146.20451,-108.905451,1.585)); +#442619 = LINE('',#442620,#442621); +#442620 = CARTESIAN_POINT('',(146.205951,-108.224152,1.585)); +#442621 = VECTOR('',#442622,1.); +#442622 = DIRECTION('',(-2.115072496535E-03,-0.999997763232,0.)); +#442623 = ORIENTED_EDGE('',*,*,#442624,.T.); +#442624 = EDGE_CURVE('',#442617,#442625,#442627,.T.); +#442625 = VERTEX_POINT('',#442626); +#442626 = CARTESIAN_POINT('',(146.069881,-108.933777,1.585)); +#442627 = CIRCLE('',#442628,7.472335361469E-02); +#442628 = AXIS2_PLACEMENT_3D('',#442629,#442630,#442631); +#442629 = CARTESIAN_POINT('',(146.13118658714,-108.8910545871,1.585)); +#442630 = DIRECTION('',(-0.,0.,-1.)); +#442631 = DIRECTION('',(0.981265016971,-0.192662831049,-0.)); +#442632 = ORIENTED_EDGE('',*,*,#442633,.T.); +#442633 = EDGE_CURVE('',#442625,#442634,#442636,.T.); +#442634 = VERTEX_POINT('',#442635); +#442635 = CARTESIAN_POINT('',(146.002726,-108.964378,1.585)); +#442636 = LINE('',#442637,#442638); +#442637 = CARTESIAN_POINT('',(146.069881,-108.933777,1.585)); +#442638 = VECTOR('',#442639,1.); +#442639 = DIRECTION('',(-0.909978127138,-0.414656252975,0.)); +#442640 = ORIENTED_EDGE('',*,*,#442641,.T.); +#442641 = EDGE_CURVE('',#442634,#442642,#442644,.T.); +#442642 = VERTEX_POINT('',#442643); +#442643 = CARTESIAN_POINT('',(145.825427,-108.963156,1.585)); +#442644 = LINE('',#442645,#442646); +#442645 = CARTESIAN_POINT('',(146.002726,-108.964378,1.585)); +#442646 = VECTOR('',#442647,1.); +#442647 = DIRECTION('',(-0.999976248865,6.892148157132E-03,0.)); +#442648 = ORIENTED_EDGE('',*,*,#442649,.T.); +#442649 = EDGE_CURVE('',#442642,#442650,#442652,.T.); +#442650 = VERTEX_POINT('',#442651); +#442651 = CARTESIAN_POINT('',(145.704015,-108.90245,1.585)); +#442652 = LINE('',#442653,#442654); +#442653 = CARTESIAN_POINT('',(145.825427,-108.963156,1.585)); +#442654 = VECTOR('',#442655,1.); +#442655 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#442656 = ORIENTED_EDGE('',*,*,#442657,.T.); +#442657 = EDGE_CURVE('',#442650,#442658,#442660,.T.); +#442658 = VERTEX_POINT('',#442659); +#442659 = CARTESIAN_POINT('',(145.682917,-108.876741,1.585)); +#442660 = LINE('',#442661,#442662); +#442661 = CARTESIAN_POINT('',(145.704015,-108.90245,1.585)); +#442662 = VECTOR('',#442663,1.); +#442663 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#442664 = ORIENTED_EDGE('',*,*,#442665,.T.); +#442665 = EDGE_CURVE('',#442658,#442666,#442668,.T.); +#442666 = VERTEX_POINT('',#442667); +#442667 = CARTESIAN_POINT('',(145.64002,-108.182484,1.585)); +#442668 = CIRCLE('',#442669,0.780471555046); +#442669 = AXIS2_PLACEMENT_3D('',#442670,#442671,#442672); +#442670 = CARTESIAN_POINT('',(146.35883564714,-108.4865233291,1.585)); +#442671 = DIRECTION('',(0.,0.,-1.)); +#442672 = DIRECTION('',(-0.866038797673,-0.499976800388,-0.)); +#442673 = ORIENTED_EDGE('',*,*,#442674,.T.); +#442674 = EDGE_CURVE('',#442666,#442541,#442675,.T.); +#442675 = LINE('',#442676,#442677); +#442676 = CARTESIAN_POINT('',(145.64002,-108.182484,1.585)); +#442677 = VECTOR('',#442678,1.); +#442678 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#442679 = PLANE('',#442680); +#442680 = AXIS2_PLACEMENT_3D('',#442681,#442682,#442683); +#442681 = CARTESIAN_POINT('',(0.,0.,1.585)); +#442682 = DIRECTION('',(0.,0.,1.)); +#442683 = DIRECTION('',(1.,0.,-0.)); +#442684 = SHELL_BASED_SURFACE_MODEL('',(#442685)); +#442685 = OPEN_SHELL('',(#442686)); +#442686 = ADVANCED_FACE('',(#442687,#442764),#442841,.T.); +#442687 = FACE_BOUND('',#442688,.F.); +#442688 = EDGE_LOOP('',(#442689,#442700,#442708,#442716,#442725,#442733, + #442742,#442750,#442758)); +#442689 = ORIENTED_EDGE('',*,*,#442690,.T.); +#442690 = EDGE_CURVE('',#442691,#442693,#442695,.T.); +#442691 = VERTEX_POINT('',#442692); +#442692 = CARTESIAN_POINT('',(147.757778,-108.208653,1.585)); +#442693 = VERTEX_POINT('',#442694); +#442694 = CARTESIAN_POINT('',(148.241688,-108.279549,1.585)); +#442695 = CIRCLE('',#442696,0.34461174713); +#442696 = AXIS2_PLACEMENT_3D('',#442697,#442698,#442699); +#442697 = CARTESIAN_POINT('',(147.96453494377,-108.4843499757,1.585)); +#442698 = DIRECTION('',(0.,0.,-1.)); +#442699 = DIRECTION('',(-0.599970678589,0.800021990218,0.)); +#442700 = ORIENTED_EDGE('',*,*,#442701,.T.); +#442701 = EDGE_CURVE('',#442693,#442702,#442704,.T.); +#442702 = VERTEX_POINT('',#442703); +#442703 = CARTESIAN_POINT('',(148.299749,-108.399996,1.585)); +#442704 = LINE('',#442705,#442706); +#442705 = CARTESIAN_POINT('',(148.241688,-108.279549,1.585)); +#442706 = VECTOR('',#442707,1.); +#442707 = DIRECTION('',(0.434228424707,-0.900802794832,0.)); +#442708 = ORIENTED_EDGE('',*,*,#442709,.T.); +#442709 = EDGE_CURVE('',#442702,#442710,#442712,.T.); +#442710 = VERTEX_POINT('',#442711); +#442711 = CARTESIAN_POINT('',(148.298527,-108.720152,1.585)); +#442712 = LINE('',#442713,#442714); +#442713 = CARTESIAN_POINT('',(148.299749,-108.399996,1.585)); +#442714 = VECTOR('',#442715,1.); +#442715 = DIRECTION('',(-3.816861463288E-03,-0.999992715758,0.)); +#442716 = ORIENTED_EDGE('',*,*,#442717,.T.); +#442717 = EDGE_CURVE('',#442710,#442718,#442720,.T.); +#442718 = VERTEX_POINT('',#442719); +#442719 = CARTESIAN_POINT('',(148.050346,-108.964378,1.585)); +#442720 = CIRCLE('',#442721,0.348635327447); +#442721 = AXIS2_PLACEMENT_3D('',#442722,#442723,#442724); +#442722 = CARTESIAN_POINT('',(147.96257448129,-108.6269720841,1.585)); +#442723 = DIRECTION('',(0.,0.,-1.)); +#442724 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#442725 = ORIENTED_EDGE('',*,*,#442726,.T.); +#442726 = EDGE_CURVE('',#442718,#442727,#442729,.T.); +#442727 = VERTEX_POINT('',#442728); +#442728 = CARTESIAN_POINT('',(147.873047,-108.963156,1.585)); +#442729 = LINE('',#442730,#442731); +#442730 = CARTESIAN_POINT('',(148.050346,-108.964378,1.585)); +#442731 = VECTOR('',#442732,1.); +#442732 = DIRECTION('',(-0.999976248865,6.892148157133E-03,0.)); +#442733 = ORIENTED_EDGE('',*,*,#442734,.T.); +#442734 = EDGE_CURVE('',#442727,#442735,#442737,.T.); +#442735 = VERTEX_POINT('',#442736); +#442736 = CARTESIAN_POINT('',(147.628822,-108.714974,1.585)); +#442737 = CIRCLE('',#442738,0.348628446662); +#442738 = AXIS2_PLACEMENT_3D('',#442739,#442740,#442741); +#442739 = CARTESIAN_POINT('',(147.96622261322,-108.6272094284,1.585)); +#442740 = DIRECTION('',(0.,0.,-1.)); +#442741 = DIRECTION('',(-0.267263369124,-0.963623521675,-0.)); +#442742 = ORIENTED_EDGE('',*,*,#442743,.T.); +#442743 = EDGE_CURVE('',#442735,#442744,#442746,.T.); +#442744 = VERTEX_POINT('',#442745); +#442745 = CARTESIAN_POINT('',(147.630044,-108.394819,1.585)); +#442746 = LINE('',#442747,#442748); +#442747 = CARTESIAN_POINT('',(147.628822,-108.714974,1.585)); +#442748 = VECTOR('',#442749,1.); +#442749 = DIRECTION('',(3.816873385031E-03,0.999992715712,0.)); +#442750 = ORIENTED_EDGE('',*,*,#442751,.T.); +#442751 = EDGE_CURVE('',#442744,#442752,#442754,.T.); +#442752 = VERTEX_POINT('',#442753); +#442753 = CARTESIAN_POINT('',(147.692248,-108.272106,1.585)); +#442754 = LINE('',#442755,#442756); +#442755 = CARTESIAN_POINT('',(147.630044,-108.394819,1.585)); +#442756 = VECTOR('',#442757,1.); +#442757 = DIRECTION('',(0.4521349062,0.891949565052,0.)); +#442758 = ORIENTED_EDGE('',*,*,#442759,.T.); +#442759 = EDGE_CURVE('',#442752,#442691,#442760,.T.); +#442760 = LINE('',#442761,#442762); +#442761 = CARTESIAN_POINT('',(147.692248,-108.272106,1.585)); +#442762 = VECTOR('',#442763,1.); +#442763 = DIRECTION('',(0.718400113328,0.695630129574,0.)); +#442764 = FACE_BOUND('',#442765,.F.); +#442765 = EDGE_LOOP('',(#442766,#442777,#442785,#442793,#442802,#442810, + #442819,#442827,#442835)); +#442766 = ORIENTED_EDGE('',*,*,#442767,.T.); +#442767 = EDGE_CURVE('',#442768,#442770,#442772,.T.); +#442768 = VERTEX_POINT('',#442769); +#442769 = CARTESIAN_POINT('',(148.086525,-108.33341,1.585)); +#442770 = VERTEX_POINT('',#442771); +#442771 = CARTESIAN_POINT('',(147.811639,-108.363817,1.585)); +#442772 = CIRCLE('',#442773,0.198386215365); +#442773 = AXIS2_PLACEMENT_3D('',#442774,#442775,#442776); +#442774 = CARTESIAN_POINT('',(147.96472195783,-108.4900021753,1.585)); +#442775 = DIRECTION('',(0.,0.,1.)); +#442776 = DIRECTION('',(0.61396928178,0.789329919001,-0.)); +#442777 = ORIENTED_EDGE('',*,*,#442778,.T.); +#442778 = EDGE_CURVE('',#442770,#442779,#442781,.T.); +#442779 = VERTEX_POINT('',#442780); +#442780 = CARTESIAN_POINT('',(147.777381,-108.432333,1.585)); +#442781 = LINE('',#442782,#442783); +#442782 = CARTESIAN_POINT('',(147.811639,-108.363817,1.585)); +#442783 = VECTOR('',#442784,1.); +#442784 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#442785 = ORIENTED_EDGE('',*,*,#442786,.T.); +#442786 = EDGE_CURVE('',#442779,#442787,#442789,.T.); +#442787 = VERTEX_POINT('',#442788); +#442788 = CARTESIAN_POINT('',(147.777381,-108.682637,1.585)); +#442789 = LINE('',#442790,#442791); +#442790 = CARTESIAN_POINT('',(147.777381,-108.432333,1.585)); +#442791 = VECTOR('',#442792,1.); +#442792 = DIRECTION('',(0.,-1.,0.)); +#442793 = ORIENTED_EDGE('',*,*,#442794,.T.); +#442794 = EDGE_CURVE('',#442787,#442795,#442797,.T.); +#442795 = VERTEX_POINT('',#442796); +#442796 = CARTESIAN_POINT('',(147.910562,-108.815819,1.585)); +#442797 = CIRCLE('',#442798,0.186867373533); +#442798 = AXIS2_PLACEMENT_3D('',#442799,#442800,#442801); +#442799 = CARTESIAN_POINT('',(147.95810071388,-108.635099643,1.585)); +#442800 = DIRECTION('',(0.,0.,1.)); +#442801 = DIRECTION('',(-0.967101482012,-0.2543908872,0.)); +#442802 = ORIENTED_EDGE('',*,*,#442803,.T.); +#442803 = EDGE_CURVE('',#442795,#442804,#442806,.T.); +#442804 = VERTEX_POINT('',#442805); +#442805 = CARTESIAN_POINT('',(148.018009,-108.815819,1.585)); +#442806 = LINE('',#442807,#442808); +#442807 = CARTESIAN_POINT('',(147.910562,-108.815819,1.585)); +#442808 = VECTOR('',#442809,1.); +#442809 = DIRECTION('',(1.,0.,0.)); +#442810 = ORIENTED_EDGE('',*,*,#442811,.T.); +#442811 = EDGE_CURVE('',#442804,#442812,#442814,.T.); +#442812 = VERTEX_POINT('',#442813); +#442813 = CARTESIAN_POINT('',(148.15119,-108.682637,1.585)); +#442814 = CIRCLE('',#442815,0.186867760544); +#442815 = AXIS2_PLACEMENT_3D('',#442816,#442817,#442818); +#442816 = CARTESIAN_POINT('',(147.97046996928,-108.6350993262,1.585)); +#442817 = DIRECTION('',(0.,0.,1.)); +#442818 = DIRECTION('',(0.254399317356,-0.967099264465,0.)); +#442819 = ORIENTED_EDGE('',*,*,#442820,.T.); +#442820 = EDGE_CURVE('',#442812,#442821,#442823,.T.); +#442821 = VERTEX_POINT('',#442822); +#442822 = CARTESIAN_POINT('',(148.15119,-108.432333,1.585)); +#442823 = LINE('',#442824,#442825); +#442824 = CARTESIAN_POINT('',(148.15119,-108.682637,1.585)); +#442825 = VECTOR('',#442826,1.); +#442826 = DIRECTION('',(0.,1.,0.)); +#442827 = ORIENTED_EDGE('',*,*,#442828,.T.); +#442828 = EDGE_CURVE('',#442821,#442829,#442831,.T.); +#442829 = VERTEX_POINT('',#442830); +#442830 = CARTESIAN_POINT('',(148.116932,-108.363817,1.585)); +#442831 = LINE('',#442832,#442833); +#442832 = CARTESIAN_POINT('',(148.15119,-108.432333,1.585)); +#442833 = VECTOR('',#442834,1.); +#442834 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#442835 = ORIENTED_EDGE('',*,*,#442836,.T.); +#442836 = EDGE_CURVE('',#442829,#442768,#442837,.T.); +#442837 = LINE('',#442838,#442839); +#442838 = CARTESIAN_POINT('',(148.116932,-108.363817,1.585)); +#442839 = VECTOR('',#442840,1.); +#442840 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#442841 = PLANE('',#442842); +#442842 = AXIS2_PLACEMENT_3D('',#442843,#442844,#442845); +#442843 = CARTESIAN_POINT('',(0.,0.,1.585)); +#442844 = DIRECTION('',(0.,0.,1.)); +#442845 = DIRECTION('',(1.,0.,-0.)); +#442846 = SHELL_BASED_SURFACE_MODEL('',(#442847)); +#442847 = OPEN_SHELL('',(#442848)); +#442848 = ADVANCED_FACE('',(#442849),#443007,.T.); +#442849 = FACE_BOUND('',#442850,.F.); +#442850 = EDGE_LOOP('',(#442851,#442862,#442870,#442878,#442886,#442894, + #442903,#442911,#442920,#442928,#442936,#442944,#442952,#442960, + #442968,#442976,#442985,#442993,#443001)); +#442851 = ORIENTED_EDGE('',*,*,#442852,.T.); +#442852 = EDGE_CURVE('',#442853,#442855,#442857,.T.); +#442853 = VERTEX_POINT('',#442854); +#442854 = CARTESIAN_POINT('',(148.613094,-108.161792,1.585)); +#442855 = VERTEX_POINT('',#442856); +#442856 = CARTESIAN_POINT('',(148.715831,-108.181193,1.585)); +#442857 = CIRCLE('',#442858,7.44076017233E-02); +#442858 = AXIS2_PLACEMENT_3D('',#442859,#442860,#442861); +#442859 = CARTESIAN_POINT('',(148.65463706572,-108.223522583,1.585)); +#442860 = DIRECTION('',(0.,0.,-1.)); +#442861 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#442862 = ORIENTED_EDGE('',*,*,#442863,.T.); +#442863 = EDGE_CURVE('',#442855,#442864,#442866,.T.); +#442864 = VERTEX_POINT('',#442865); +#442865 = CARTESIAN_POINT('',(148.782987,-108.150593,1.585)); +#442866 = LINE('',#442867,#442868); +#442867 = CARTESIAN_POINT('',(148.715831,-108.181193,1.585)); +#442868 = VECTOR('',#442869,1.); +#442869 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#442870 = ORIENTED_EDGE('',*,*,#442871,.T.); +#442871 = EDGE_CURVE('',#442864,#442872,#442874,.T.); +#442872 = VERTEX_POINT('',#442873); +#442873 = CARTESIAN_POINT('',(148.955108,-108.150593,1.585)); +#442874 = LINE('',#442875,#442876); +#442875 = CARTESIAN_POINT('',(148.782987,-108.150593,1.585)); +#442876 = VECTOR('',#442877,1.); +#442877 = DIRECTION('',(1.,0.,0.)); +#442878 = ORIENTED_EDGE('',*,*,#442879,.T.); +#442879 = EDGE_CURVE('',#442872,#442880,#442882,.T.); +#442880 = VERTEX_POINT('',#442881); +#442881 = CARTESIAN_POINT('',(149.081698,-108.212521,1.585)); +#442882 = LINE('',#442883,#442884); +#442883 = CARTESIAN_POINT('',(148.955108,-108.150593,1.585)); +#442884 = VECTOR('',#442885,1.); +#442885 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#442886 = ORIENTED_EDGE('',*,*,#442887,.T.); +#442887 = EDGE_CURVE('',#442880,#442888,#442890,.T.); +#442888 = VERTEX_POINT('',#442889); +#442889 = CARTESIAN_POINT('',(149.102796,-108.23823,1.585)); +#442890 = LINE('',#442891,#442892); +#442891 = CARTESIAN_POINT('',(149.081698,-108.212521,1.585)); +#442892 = VECTOR('',#442893,1.); +#442893 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#442894 = ORIENTED_EDGE('',*,*,#442895,.T.); +#442895 = EDGE_CURVE('',#442888,#442896,#442898,.T.); +#442896 = VERTEX_POINT('',#442897); +#442897 = CARTESIAN_POINT('',(149.145693,-108.932487,1.585)); +#442898 = CIRCLE('',#442899,0.780466291445); +#442899 = AXIS2_PLACEMENT_3D('',#442900,#442901,#442902); +#442900 = CARTESIAN_POINT('',(148.4268832213,-108.6284473082,1.585)); +#442901 = DIRECTION('',(0.,0.,-1.)); +#442902 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#442903 = ORIENTED_EDGE('',*,*,#442904,.T.); +#442904 = EDGE_CURVE('',#442896,#442905,#442907,.T.); +#442905 = VERTEX_POINT('',#442906); +#442906 = CARTESIAN_POINT('',(149.125001,-108.953179,1.585)); +#442907 = LINE('',#442908,#442909); +#442908 = CARTESIAN_POINT('',(149.145693,-108.932487,1.585)); +#442909 = VECTOR('',#442910,1.); +#442910 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#442911 = ORIENTED_EDGE('',*,*,#442912,.T.); +#442912 = EDGE_CURVE('',#442905,#442913,#442915,.T.); +#442913 = VERTEX_POINT('',#442914); +#442914 = CARTESIAN_POINT('',(149.008333,-108.890819,1.585)); +#442915 = CIRCLE('',#442916,7.499979580333E-02); +#442916 = AXIS2_PLACEMENT_3D('',#442917,#442918,#442919); +#442917 = CARTESIAN_POINT('',(149.0833327958,-108.8908193164,1.585)); +#442918 = DIRECTION('',(-0.,0.,-1.)); +#442919 = DIRECTION('',(0.555577568593,-0.831464710783,-0.)); +#442920 = ORIENTED_EDGE('',*,*,#442921,.T.); +#442921 = EDGE_CURVE('',#442913,#442922,#442924,.T.); +#442922 = VERTEX_POINT('',#442923); +#442923 = CARTESIAN_POINT('',(149.008333,-108.384714,1.585)); +#442924 = LINE('',#442925,#442926); +#442925 = CARTESIAN_POINT('',(149.008333,-108.890819,1.585)); +#442926 = VECTOR('',#442927,1.); +#442927 = DIRECTION('',(0.,1.,0.)); +#442928 = ORIENTED_EDGE('',*,*,#442929,.T.); +#442929 = EDGE_CURVE('',#442922,#442930,#442932,.T.); +#442930 = VERTEX_POINT('',#442931); +#442931 = CARTESIAN_POINT('',(148.979812,-108.327672,1.585)); +#442932 = LINE('',#442933,#442934); +#442933 = CARTESIAN_POINT('',(149.008333,-108.384714,1.585)); +#442934 = VECTOR('',#442935,1.); +#442935 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#442936 = ORIENTED_EDGE('',*,*,#442937,.T.); +#442937 = EDGE_CURVE('',#442930,#442938,#442940,.T.); +#442938 = VERTEX_POINT('',#442939); +#442939 = CARTESIAN_POINT('',(148.922771,-108.299152,1.585)); +#442940 = LINE('',#442941,#442942); +#442941 = CARTESIAN_POINT('',(148.979812,-108.327672,1.585)); +#442942 = VECTOR('',#442943,1.); +#442943 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#442944 = ORIENTED_EDGE('',*,*,#442945,.T.); +#442945 = EDGE_CURVE('',#442938,#442946,#442948,.T.); +#442946 = VERTEX_POINT('',#442947); +#442947 = CARTESIAN_POINT('',(148.815324,-108.299152,1.585)); +#442948 = LINE('',#442949,#442950); +#442949 = CARTESIAN_POINT('',(148.922771,-108.299152,1.585)); +#442950 = VECTOR('',#442951,1.); +#442951 = DIRECTION('',(-1.,0.,0.)); +#442952 = ORIENTED_EDGE('',*,*,#442953,.T.); +#442953 = EDGE_CURVE('',#442946,#442954,#442956,.T.); +#442954 = VERTEX_POINT('',#442955); +#442955 = CARTESIAN_POINT('',(148.746808,-108.33341,1.585)); +#442956 = LINE('',#442957,#442958); +#442957 = CARTESIAN_POINT('',(148.815324,-108.299152,1.585)); +#442958 = VECTOR('',#442959,1.); +#442959 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#442960 = ORIENTED_EDGE('',*,*,#442961,.T.); +#442961 = EDGE_CURVE('',#442954,#442962,#442964,.T.); +#442962 = VERTEX_POINT('',#442963); +#442963 = CARTESIAN_POINT('',(148.729762,-108.350456,1.585)); +#442964 = LINE('',#442965,#442966); +#442965 = CARTESIAN_POINT('',(148.746808,-108.33341,1.585)); +#442966 = VECTOR('',#442967,1.); +#442967 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#442968 = ORIENTED_EDGE('',*,*,#442969,.T.); +#442969 = EDGE_CURVE('',#442962,#442970,#442972,.T.); +#442970 = VERTEX_POINT('',#442971); +#442971 = CARTESIAN_POINT('',(148.728321,-108.905451,1.585)); +#442972 = LINE('',#442973,#442974); +#442973 = CARTESIAN_POINT('',(148.729762,-108.350456,1.585)); +#442974 = VECTOR('',#442975,1.); +#442975 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#442976 = ORIENTED_EDGE('',*,*,#442977,.T.); +#442977 = EDGE_CURVE('',#442970,#442978,#442980,.T.); +#442978 = VERTEX_POINT('',#442979); +#442979 = CARTESIAN_POINT('',(148.579762,-108.890819,1.585)); +#442980 = CIRCLE('',#442981,7.500006711465E-02); +#442981 = AXIS2_PLACEMENT_3D('',#442982,#442983,#442984); +#442982 = CARTESIAN_POINT('',(148.65476206711,-108.8908190671,1.585)); +#442983 = DIRECTION('',(-0.,0.,-1.)); +#442984 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#442985 = ORIENTED_EDGE('',*,*,#442986,.T.); +#442986 = EDGE_CURVE('',#442978,#442987,#442989,.T.); +#442987 = VERTEX_POINT('',#442988); +#442988 = CARTESIAN_POINT('',(148.581203,-108.20952,1.585)); +#442989 = LINE('',#442990,#442991); +#442990 = CARTESIAN_POINT('',(148.579762,-108.890819,1.585)); +#442991 = VECTOR('',#442992,1.); +#442992 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#442993 = ORIENTED_EDGE('',*,*,#442994,.T.); +#442994 = EDGE_CURVE('',#442987,#442995,#442997,.T.); +#442995 = VERTEX_POINT('',#442996); +#442996 = CARTESIAN_POINT('',(148.592402,-108.182484,1.585)); +#442997 = LINE('',#442998,#442999); +#442998 = CARTESIAN_POINT('',(148.581203,-108.20952,1.585)); +#442999 = VECTOR('',#443000,1.); +#443000 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#443001 = ORIENTED_EDGE('',*,*,#443002,.T.); +#443002 = EDGE_CURVE('',#442995,#442853,#443003,.T.); +#443003 = LINE('',#443004,#443005); +#443004 = CARTESIAN_POINT('',(148.592402,-108.182484,1.585)); +#443005 = VECTOR('',#443006,1.); +#443006 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#443007 = PLANE('',#443008); +#443008 = AXIS2_PLACEMENT_3D('',#443009,#443010,#443011); +#443009 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443010 = DIRECTION('',(0.,0.,1.)); +#443011 = DIRECTION('',(1.,0.,-0.)); +#443012 = SHELL_BASED_SURFACE_MODEL('',(#443013)); +#443013 = OPEN_SHELL('',(#443014)); +#443014 = ADVANCED_FACE('',(#443015),#443201,.T.); +#443015 = FACE_BOUND('',#443016,.F.); +#443016 = EDGE_LOOP('',(#443017,#443028,#443036,#443045,#443053,#443061, + #443070,#443078,#443087,#443095,#443103,#443111,#443120,#443128, + #443137,#443145,#443154,#443162,#443170,#443178,#443187,#443195)); +#443017 = ORIENTED_EDGE('',*,*,#443018,.T.); +#443018 = EDGE_CURVE('',#443019,#443021,#443023,.T.); +#443019 = VERTEX_POINT('',#443020); +#443020 = CARTESIAN_POINT('',(150.211559,-107.964378,1.585)); +#443021 = VERTEX_POINT('',#443022); +#443022 = CARTESIAN_POINT('',(150.226191,-107.815819,1.585)); +#443023 = CIRCLE('',#443024,7.500006711464E-02); +#443024 = AXIS2_PLACEMENT_3D('',#443025,#443026,#443027); +#443025 = CARTESIAN_POINT('',(150.22619093288,-107.8908190671,1.585)); +#443026 = DIRECTION('',(0.,0.,-1.)); +#443027 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#443028 = ORIENTED_EDGE('',*,*,#443029,.T.); +#443029 = EDGE_CURVE('',#443021,#443030,#443032,.T.); +#443030 = VERTEX_POINT('',#443031); +#443031 = CARTESIAN_POINT('',(150.852976,-107.816581,1.585)); +#443032 = LINE('',#443033,#443034); +#443033 = CARTESIAN_POINT('',(150.226191,-107.815819,1.585)); +#443034 = VECTOR('',#443035,1.); +#443035 = DIRECTION('',(0.999999261004,-1.215726982744E-03,0.)); +#443036 = ORIENTED_EDGE('',*,*,#443037,.T.); +#443037 = EDGE_CURVE('',#443030,#443038,#443040,.T.); +#443038 = VERTEX_POINT('',#443039); +#443039 = CARTESIAN_POINT('',(150.918797,-107.905451,1.585)); +#443040 = CIRCLE('',#443041,7.447391611627E-02); +#443041 = AXIS2_PLACEMENT_3D('',#443042,#443043,#443044); +#443042 = CARTESIAN_POINT('',(150.84579692664,-107.8907080874,1.585)); +#443043 = DIRECTION('',(0.,0.,-1.)); +#443044 = DIRECTION('',(9.639715124812E-02,0.995342950561,0.)); +#443045 = ORIENTED_EDGE('',*,*,#443046,.T.); +#443046 = EDGE_CURVE('',#443038,#443047,#443049,.T.); +#443047 = VERTEX_POINT('',#443048); +#443048 = CARTESIAN_POINT('',(150.901681,-107.940207,1.585)); +#443049 = LINE('',#443050,#443051); +#443050 = CARTESIAN_POINT('',(150.918797,-107.905451,1.585)); +#443051 = VECTOR('',#443052,1.); +#443052 = DIRECTION('',(-0.441795255027,-0.897115908139,0.)); +#443053 = ORIENTED_EDGE('',*,*,#443054,.T.); +#443054 = EDGE_CURVE('',#443047,#443055,#443057,.T.); +#443055 = VERTEX_POINT('',#443056); +#443056 = CARTESIAN_POINT('',(150.674785,-108.199516,1.585)); +#443057 = LINE('',#443058,#443059); +#443058 = CARTESIAN_POINT('',(150.901681,-107.940207,1.585)); +#443059 = VECTOR('',#443060,1.); +#443060 = DIRECTION('',(-0.658505635208,-0.752575795784,0.)); +#443061 = ORIENTED_EDGE('',*,*,#443062,.T.); +#443062 = EDGE_CURVE('',#443055,#443063,#443065,.T.); +#443063 = VERTEX_POINT('',#443064); +#443064 = CARTESIAN_POINT('',(150.918797,-108.447615,1.585)); +#443065 = CIRCLE('',#443066,0.348520834816); +#443066 = AXIS2_PLACEMENT_3D('',#443067,#443068,#443069); +#443067 = CARTESIAN_POINT('',(150.5814916174,-108.5353181993,1.585)); +#443068 = DIRECTION('',(0.,0.,-1.)); +#443069 = DIRECTION('',(0.267683803321,0.963506814423,0.)); +#443070 = ORIENTED_EDGE('',*,*,#443071,.T.); +#443071 = EDGE_CURVE('',#443063,#443072,#443074,.T.); +#443072 = VERTEX_POINT('',#443073); +#443073 = CARTESIAN_POINT('',(150.917575,-108.720152,1.585)); +#443074 = LINE('',#443075,#443076); +#443075 = CARTESIAN_POINT('',(150.918797,-108.447615,1.585)); +#443076 = VECTOR('',#443077,1.); +#443077 = DIRECTION('',(-4.483749789568E-03,-0.999989947943,0.)); +#443078 = ORIENTED_EDGE('',*,*,#443079,.T.); +#443079 = EDGE_CURVE('',#443072,#443080,#443082,.T.); +#443080 = VERTEX_POINT('',#443081); +#443081 = CARTESIAN_POINT('',(150.669394,-108.964378,1.585)); +#443082 = CIRCLE('',#443083,0.348635327447); +#443083 = AXIS2_PLACEMENT_3D('',#443084,#443085,#443086); +#443084 = CARTESIAN_POINT('',(150.58162248129,-108.6269720841,1.585)); +#443085 = DIRECTION('',(0.,0.,-1.)); +#443086 = DIRECTION('',(0.963621561732,-0.267270435638,0.)); +#443087 = ORIENTED_EDGE('',*,*,#443088,.T.); +#443088 = EDGE_CURVE('',#443080,#443089,#443091,.T.); +#443089 = VERTEX_POINT('',#443090); +#443090 = CARTESIAN_POINT('',(150.349238,-108.963156,1.585)); +#443091 = LINE('',#443092,#443093); +#443092 = CARTESIAN_POINT('',(150.669394,-108.964378,1.585)); +#443093 = VECTOR('',#443094,1.); +#443094 = DIRECTION('',(-0.999992715758,3.816861463332E-03,0.)); +#443095 = ORIENTED_EDGE('',*,*,#443096,.T.); +#443096 = EDGE_CURVE('',#443089,#443097,#443099,.T.); +#443097 = VERTEX_POINT('',#443098); +#443098 = CARTESIAN_POINT('',(150.226525,-108.90095,1.585)); +#443099 = LINE('',#443100,#443101); +#443100 = CARTESIAN_POINT('',(150.349238,-108.963156,1.585)); +#443101 = VECTOR('',#443102,1.); +#443102 = DIRECTION('',(-0.891943702445,0.452146471477,0.)); +#443103 = ORIENTED_EDGE('',*,*,#443104,.T.); +#443104 = EDGE_CURVE('',#443097,#443105,#443107,.T.); +#443105 = VERTEX_POINT('',#443106); +#443106 = CARTESIAN_POINT('',(150.16383,-108.837247,1.585)); +#443107 = LINE('',#443108,#443109); +#443108 = CARTESIAN_POINT('',(150.226525,-108.90095,1.585)); +#443109 = VECTOR('',#443110,1.); +#443110 = DIRECTION('',(-0.701445434384,0.712723159846,0.)); +#443111 = ORIENTED_EDGE('',*,*,#443112,.T.); +#443112 = EDGE_CURVE('',#443105,#443113,#443115,.T.); +#443113 = VERTEX_POINT('',#443114); +#443114 = CARTESIAN_POINT('',(150.279225,-108.742548,1.585)); +#443115 = CIRCLE('',#443116,7.50001266804E-02); +#443116 = AXIS2_PLACEMENT_3D('',#443117,#443118,#443119); +#443117 = CARTESIAN_POINT('',(150.22619105199,-108.7955802483,1.585)); +#443118 = DIRECTION('',(0.,0.,-1.)); +#443119 = DIRECTION('',(-0.831479288827,-0.555555750804,-0.)); +#443120 = ORIENTED_EDGE('',*,*,#443121,.T.); +#443121 = EDGE_CURVE('',#443113,#443122,#443124,.T.); +#443122 = VERTEX_POINT('',#443123); +#443123 = CARTESIAN_POINT('',(150.318237,-108.781561,1.585)); +#443124 = LINE('',#443125,#443126); +#443125 = CARTESIAN_POINT('',(150.279225,-108.742548,1.585)); +#443126 = VECTOR('',#443127,1.); +#443127 = DIRECTION('',(0.707097718562,-0.707115843695,0.)); +#443128 = ORIENTED_EDGE('',*,*,#443129,.T.); +#443129 = EDGE_CURVE('',#443122,#443130,#443132,.T.); +#443130 = VERTEX_POINT('',#443131); +#443131 = CARTESIAN_POINT('',(150.705572,-108.781561,1.585)); +#443132 = CIRCLE('',#443133,0.358502380266); +#443133 = AXIS2_PLACEMENT_3D('',#443134,#443135,#443136); +#443134 = CARTESIAN_POINT('',(150.5119045,-108.479871,1.585)); +#443135 = DIRECTION('',(0.,0.,1.)); +#443136 = DIRECTION('',(-0.540212591773,-0.841528582812,0.)); +#443137 = ORIENTED_EDGE('',*,*,#443138,.T.); +#443138 = EDGE_CURVE('',#443130,#443139,#443141,.T.); +#443139 = VERTEX_POINT('',#443140); +#443140 = CARTESIAN_POINT('',(150.735979,-108.751153,1.585)); +#443141 = LINE('',#443142,#443143); +#443142 = CARTESIAN_POINT('',(150.705572,-108.781561,1.585)); +#443143 = VECTOR('',#443144,1.); +#443144 = DIRECTION('',(0.707095153914,0.707118408268,0.)); +#443145 = ORIENTED_EDGE('',*,*,#443146,.T.); +#443146 = EDGE_CURVE('',#443139,#443147,#443149,.T.); +#443147 = VERTEX_POINT('',#443148); +#443148 = CARTESIAN_POINT('',(150.73598,-108.411436,1.585)); +#443149 = CIRCLE('',#443150,0.305616146029); +#443150 = AXIS2_PLACEMENT_3D('',#443151,#443152,#443153); +#443151 = CARTESIAN_POINT('',(150.48191392049,-108.5812937521,1.585)); +#443152 = DIRECTION('',(0.,-0.,1.)); +#443153 = DIRECTION('',(0.83132086707,-0.555792781505,-0.)); +#443154 = ORIENTED_EDGE('',*,*,#443155,.T.); +#443155 = EDGE_CURVE('',#443147,#443156,#443158,.T.); +#443156 = VERTEX_POINT('',#443157); +#443157 = CARTESIAN_POINT('',(150.705573,-108.381029,1.585)); +#443158 = LINE('',#443159,#443160); +#443159 = CARTESIAN_POINT('',(150.73598,-108.411436,1.585)); +#443160 = VECTOR('',#443161,1.); +#443161 = DIRECTION('',(-0.707106781187,0.707106781186,0.)); +#443162 = ORIENTED_EDGE('',*,*,#443163,.T.); +#443163 = EDGE_CURVE('',#443156,#443164,#443166,.T.); +#443164 = VERTEX_POINT('',#443165); +#443165 = CARTESIAN_POINT('',(150.637057,-108.346771,1.585)); +#443166 = LINE('',#443167,#443168); +#443167 = CARTESIAN_POINT('',(150.705573,-108.381029,1.585)); +#443168 = VECTOR('',#443169,1.); +#443169 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#443170 = ORIENTED_EDGE('',*,*,#443171,.T.); +#443171 = EDGE_CURVE('',#443164,#443172,#443174,.T.); +#443172 = VERTEX_POINT('',#443173); +#443173 = CARTESIAN_POINT('',(150.497273,-108.34533,1.585)); +#443174 = LINE('',#443175,#443176); +#443175 = CARTESIAN_POINT('',(150.637057,-108.346771,1.585)); +#443176 = VECTOR('',#443177,1.); +#443177 = DIRECTION('',(-0.999946868947,1.030821437469E-02,0.)); +#443178 = ORIENTED_EDGE('',*,*,#443179,.T.); +#443179 = EDGE_CURVE('',#443172,#443180,#443182,.T.); +#443180 = VERTEX_POINT('',#443181); +#443181 = CARTESIAN_POINT('',(150.455462,-108.222383,1.585)); +#443182 = CIRCLE('',#443183,7.500015628756E-02); +#443183 = AXIS2_PLACEMENT_3D('',#443184,#443185,#443186); +#443184 = CARTESIAN_POINT('',(150.51190528432,-108.2717710461,1.585)); +#443185 = DIRECTION('',(0.,0.,-1.)); +#443186 = DIRECTION('',(-0.195096717785,-0.980784008184,-0.)); +#443187 = ORIENTED_EDGE('',*,*,#443188,.T.); +#443188 = EDGE_CURVE('',#443180,#443189,#443191,.T.); +#443189 = VERTEX_POINT('',#443190); +#443190 = CARTESIAN_POINT('',(150.679956,-107.965819,1.585)); +#443191 = LINE('',#443192,#443193); +#443192 = CARTESIAN_POINT('',(150.455462,-108.222383,1.585)); +#443193 = VECTOR('',#443194,1.); +#443194 = DIRECTION('',(0.658505438534,0.752575967874,0.)); +#443195 = ORIENTED_EDGE('',*,*,#443196,.T.); +#443196 = EDGE_CURVE('',#443189,#443019,#443197,.T.); +#443197 = LINE('',#443198,#443199); +#443198 = CARTESIAN_POINT('',(150.679956,-107.965819,1.585)); +#443199 = VECTOR('',#443200,1.); +#443200 = DIRECTION('',(-0.999995267761,3.076435546862E-03,0.)); +#443201 = PLANE('',#443202); +#443202 = AXIS2_PLACEMENT_3D('',#443203,#443204,#443205); +#443203 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443204 = DIRECTION('',(0.,0.,1.)); +#443205 = DIRECTION('',(1.,0.,-0.)); +#443206 = SHELL_BASED_SURFACE_MODEL('',(#443207)); +#443207 = OPEN_SHELL('',(#443208)); +#443208 = ADVANCED_FACE('',(#443209),#443409,.T.); +#443209 = FACE_BOUND('',#443210,.F.); +#443210 = EDGE_LOOP('',(#443211,#443221,#443229,#443237,#443246,#443254, + #443262,#443271,#443279,#443288,#443296,#443304,#443313,#443321, + #443329,#443337,#443345,#443353,#443362,#443370,#443378,#443386, + #443395,#443403)); +#443211 = ORIENTED_EDGE('',*,*,#443212,.T.); +#443212 = EDGE_CURVE('',#443213,#443215,#443217,.T.); +#443213 = VERTEX_POINT('',#443214); +#443214 = CARTESIAN_POINT('',(143.975791,-101.006383,1.585)); +#443215 = VERTEX_POINT('',#443216); +#443216 = CARTESIAN_POINT('',(144.049971,-100.991629,1.585)); +#443217 = LINE('',#443218,#443219); +#443218 = CARTESIAN_POINT('',(143.975791,-101.006383,1.585)); +#443219 = VECTOR('',#443220,1.); +#443220 = DIRECTION('',(0.980788618201,0.195073541021,0.)); +#443221 = ORIENTED_EDGE('',*,*,#443222,.T.); +#443222 = EDGE_CURVE('',#443215,#443223,#443225,.T.); +#443223 = VERTEX_POINT('',#443224); +#443224 = CARTESIAN_POINT('',(144.174074,-100.940223,1.585)); +#443225 = LINE('',#443226,#443227); +#443226 = CARTESIAN_POINT('',(144.049971,-100.991629,1.585)); +#443227 = VECTOR('',#443228,1.); +#443228 = DIRECTION('',(0.923877284054,0.382688860576,0.)); +#443229 = ORIENTED_EDGE('',*,*,#443230,.T.); +#443230 = EDGE_CURVE('',#443223,#443231,#443233,.T.); +#443231 = VERTEX_POINT('',#443232); +#443232 = CARTESIAN_POINT('',(144.173079,-101.844509,1.585)); +#443233 = LINE('',#443234,#443235); +#443234 = CARTESIAN_POINT('',(144.174074,-100.940223,1.585)); +#443235 = VECTOR('',#443236,1.); +#443236 = DIRECTION('',(-1.100314942031E-03,-0.999999394653,0.)); +#443237 = ORIENTED_EDGE('',*,*,#443238,.T.); +#443238 = EDGE_CURVE('',#443231,#443239,#443241,.T.); +#443239 = VERTEX_POINT('',#443240); +#443240 = CARTESIAN_POINT('',(144.094509,-101.923079,1.585)); +#443241 = CIRCLE('',#443242,0.100002891901); +#443242 = AXIS2_PLACEMENT_3D('',#443243,#443244,#443245); +#443243 = CARTESIAN_POINT('',(144.07499792896,-101.8249979289,1.585)); +#443244 = DIRECTION('',(0.,0.,-1.)); +#443245 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#443246 = ORIENTED_EDGE('',*,*,#443247,.T.); +#443247 = EDGE_CURVE('',#443239,#443248,#443250,.T.); +#443248 = VERTEX_POINT('',#443249); +#443249 = CARTESIAN_POINT('',(141.9,-101.925,1.585)); +#443250 = LINE('',#443251,#443252); +#443251 = CARTESIAN_POINT('',(144.094509,-101.923079,1.585)); +#443252 = VECTOR('',#443253,1.); +#443253 = DIRECTION('',(-0.999999616867,-8.75366318387E-04,0.)); +#443254 = ORIENTED_EDGE('',*,*,#443255,.T.); +#443255 = EDGE_CURVE('',#443248,#443256,#443258,.T.); +#443256 = VERTEX_POINT('',#443257); +#443257 = CARTESIAN_POINT('',(141.898079,-106.869509,1.585)); +#443258 = LINE('',#443259,#443260); +#443259 = CARTESIAN_POINT('',(141.9,-101.925,1.585)); +#443260 = VECTOR('',#443261,1.); +#443261 = DIRECTION('',(-3.885117521337E-04,-0.999999924529,0.)); +#443262 = ORIENTED_EDGE('',*,*,#443263,.T.); +#443263 = EDGE_CURVE('',#443256,#443264,#443266,.T.); +#443264 = VERTEX_POINT('',#443265); +#443265 = CARTESIAN_POINT('',(141.819509,-106.948079,1.585)); +#443266 = CIRCLE('',#443267,0.100002891901); +#443267 = AXIS2_PLACEMENT_3D('',#443268,#443269,#443270); +#443268 = CARTESIAN_POINT('',(141.79999792896,-106.8499979289,1.585)); +#443269 = DIRECTION('',(0.,0.,-1.)); +#443270 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#443271 = ORIENTED_EDGE('',*,*,#443272,.T.); +#443272 = EDGE_CURVE('',#443264,#443273,#443275,.T.); +#443273 = VERTEX_POINT('',#443274); +#443274 = CARTESIAN_POINT('',(133.180491,-106.948079,1.585)); +#443275 = LINE('',#443276,#443277); +#443276 = CARTESIAN_POINT('',(141.819509,-106.948079,1.585)); +#443277 = VECTOR('',#443278,1.); +#443278 = DIRECTION('',(-1.,0.,0.)); +#443279 = ORIENTED_EDGE('',*,*,#443280,.T.); +#443280 = EDGE_CURVE('',#443273,#443281,#443283,.T.); +#443281 = VERTEX_POINT('',#443282); +#443282 = CARTESIAN_POINT('',(133.101921,-106.869509,1.585)); +#443283 = CIRCLE('',#443284,0.100002891901); +#443284 = AXIS2_PLACEMENT_3D('',#443285,#443286,#443287); +#443285 = CARTESIAN_POINT('',(133.20000207103,-106.8499979289,1.585)); +#443286 = DIRECTION('',(0.,0.,-1.)); +#443287 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#443288 = ORIENTED_EDGE('',*,*,#443289,.T.); +#443289 = EDGE_CURVE('',#443281,#443290,#443292,.T.); +#443290 = VERTEX_POINT('',#443291); +#443291 = CARTESIAN_POINT('',(133.1,-101.925,1.585)); +#443292 = LINE('',#443293,#443294); +#443293 = CARTESIAN_POINT('',(133.101921,-106.869509,1.585)); +#443294 = VECTOR('',#443295,1.); +#443295 = DIRECTION('',(-3.885117521337E-04,0.999999924529,0.)); +#443296 = ORIENTED_EDGE('',*,*,#443297,.T.); +#443297 = EDGE_CURVE('',#443290,#443298,#443300,.T.); +#443298 = VERTEX_POINT('',#443299); +#443299 = CARTESIAN_POINT('',(130.905491,-101.923079,1.585)); +#443300 = LINE('',#443301,#443302); +#443301 = CARTESIAN_POINT('',(133.1,-101.925,1.585)); +#443302 = VECTOR('',#443303,1.); +#443303 = DIRECTION('',(-0.999999616867,8.75366318387E-04,0.)); +#443304 = ORIENTED_EDGE('',*,*,#443305,.T.); +#443305 = EDGE_CURVE('',#443298,#443306,#443308,.T.); +#443306 = VERTEX_POINT('',#443307); +#443307 = CARTESIAN_POINT('',(130.826921,-101.844509,1.585)); +#443308 = CIRCLE('',#443309,0.100002891901); +#443309 = AXIS2_PLACEMENT_3D('',#443310,#443311,#443312); +#443310 = CARTESIAN_POINT('',(130.92500207103,-101.8249979289,1.585)); +#443311 = DIRECTION('',(0.,0.,-1.)); +#443312 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#443313 = ORIENTED_EDGE('',*,*,#443314,.T.); +#443314 = EDGE_CURVE('',#443306,#443315,#443317,.T.); +#443315 = VERTEX_POINT('',#443316); +#443316 = CARTESIAN_POINT('',(130.826921,-100.940635,1.585)); +#443317 = LINE('',#443318,#443319); +#443318 = CARTESIAN_POINT('',(130.826921,-101.844509,1.585)); +#443319 = VECTOR('',#443320,1.); +#443320 = DIRECTION('',(0.,1.,0.)); +#443321 = ORIENTED_EDGE('',*,*,#443322,.T.); +#443322 = EDGE_CURVE('',#443315,#443323,#443325,.T.); +#443323 = VERTEX_POINT('',#443324); +#443324 = CARTESIAN_POINT('',(130.950029,-100.991629,1.585)); +#443325 = LINE('',#443326,#443327); +#443326 = CARTESIAN_POINT('',(130.826921,-100.940635,1.585)); +#443327 = VECTOR('',#443328,1.); +#443328 = DIRECTION('',(0.923876887798,-0.382689817204,0.)); +#443329 = ORIENTED_EDGE('',*,*,#443330,.T.); +#443330 = EDGE_CURVE('',#443323,#443331,#443333,.T.); +#443331 = VERTEX_POINT('',#443332); +#443332 = CARTESIAN_POINT('',(131.025,-101.006541,1.585)); +#443333 = LINE('',#443334,#443335); +#443334 = CARTESIAN_POINT('',(130.950029,-100.991629,1.585)); +#443335 = VECTOR('',#443336,1.); +#443336 = DIRECTION('',(0.980786930197,-0.195082027759,0.)); +#443337 = ORIENTED_EDGE('',*,*,#443338,.T.); +#443338 = EDGE_CURVE('',#443331,#443339,#443341,.T.); +#443339 = VERTEX_POINT('',#443340); +#443340 = CARTESIAN_POINT('',(131.025,-101.725,1.585)); +#443341 = LINE('',#443342,#443343); +#443342 = CARTESIAN_POINT('',(131.025,-101.006541,1.585)); +#443343 = VECTOR('',#443344,1.); +#443344 = DIRECTION('',(0.,-1.,0.)); +#443345 = ORIENTED_EDGE('',*,*,#443346,.T.); +#443346 = EDGE_CURVE('',#443339,#443347,#443349,.T.); +#443347 = VERTEX_POINT('',#443348); +#443348 = CARTESIAN_POINT('',(133.219509,-101.726921,1.585)); +#443349 = LINE('',#443350,#443351); +#443350 = CARTESIAN_POINT('',(131.025,-101.725,1.585)); +#443351 = VECTOR('',#443352,1.); +#443352 = DIRECTION('',(0.999999616867,-8.753663183934E-04,0.)); +#443353 = ORIENTED_EDGE('',*,*,#443354,.T.); +#443354 = EDGE_CURVE('',#443347,#443355,#443357,.T.); +#443355 = VERTEX_POINT('',#443356); +#443356 = CARTESIAN_POINT('',(133.298079,-101.805491,1.585)); +#443357 = CIRCLE('',#443358,0.100002891901); +#443358 = AXIS2_PLACEMENT_3D('',#443359,#443360,#443361); +#443359 = CARTESIAN_POINT('',(133.19999792896,-101.825002071,1.585)); +#443360 = DIRECTION('',(0.,0.,-1.)); +#443361 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#443362 = ORIENTED_EDGE('',*,*,#443363,.T.); +#443363 = EDGE_CURVE('',#443355,#443364,#443366,.T.); +#443364 = VERTEX_POINT('',#443365); +#443365 = CARTESIAN_POINT('',(133.3,-106.75,1.585)); +#443366 = LINE('',#443367,#443368); +#443367 = CARTESIAN_POINT('',(133.298079,-101.805491,1.585)); +#443368 = VECTOR('',#443369,1.); +#443369 = DIRECTION('',(3.885117521337E-04,-0.999999924529,0.)); +#443370 = ORIENTED_EDGE('',*,*,#443371,.T.); +#443371 = EDGE_CURVE('',#443364,#443372,#443374,.T.); +#443372 = VERTEX_POINT('',#443373); +#443373 = CARTESIAN_POINT('',(141.7,-106.75,1.585)); +#443374 = LINE('',#443375,#443376); +#443375 = CARTESIAN_POINT('',(133.3,-106.75,1.585)); +#443376 = VECTOR('',#443377,1.); +#443377 = DIRECTION('',(1.,0.,0.)); +#443378 = ORIENTED_EDGE('',*,*,#443379,.T.); +#443379 = EDGE_CURVE('',#443372,#443380,#443382,.T.); +#443380 = VERTEX_POINT('',#443381); +#443381 = CARTESIAN_POINT('',(141.701921,-101.805491,1.585)); +#443382 = LINE('',#443383,#443384); +#443383 = CARTESIAN_POINT('',(141.7,-106.75,1.585)); +#443384 = VECTOR('',#443385,1.); +#443385 = DIRECTION('',(3.885117521337E-04,0.999999924529,0.)); +#443386 = ORIENTED_EDGE('',*,*,#443387,.T.); +#443387 = EDGE_CURVE('',#443380,#443388,#443390,.T.); +#443388 = VERTEX_POINT('',#443389); +#443389 = CARTESIAN_POINT('',(141.780491,-101.726921,1.585)); +#443390 = CIRCLE('',#443391,0.100002891901); +#443391 = AXIS2_PLACEMENT_3D('',#443392,#443393,#443394); +#443392 = CARTESIAN_POINT('',(141.80000207103,-101.825002071,1.585)); +#443393 = DIRECTION('',(0.,0.,-1.)); +#443394 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#443395 = ORIENTED_EDGE('',*,*,#443396,.T.); +#443396 = EDGE_CURVE('',#443388,#443397,#443399,.T.); +#443397 = VERTEX_POINT('',#443398); +#443398 = CARTESIAN_POINT('',(143.975,-101.725,1.585)); +#443399 = LINE('',#443400,#443401); +#443400 = CARTESIAN_POINT('',(141.780491,-101.726921,1.585)); +#443401 = VECTOR('',#443402,1.); +#443402 = DIRECTION('',(0.999999616867,8.753663183934E-04,0.)); +#443403 = ORIENTED_EDGE('',*,*,#443404,.T.); +#443404 = EDGE_CURVE('',#443397,#443213,#443405,.T.); +#443405 = LINE('',#443406,#443407); +#443406 = CARTESIAN_POINT('',(143.975,-101.725,1.585)); +#443407 = VECTOR('',#443408,1.); +#443408 = DIRECTION('',(1.100724754364E-03,0.999999394202,0.)); +#443409 = PLANE('',#443410); +#443410 = AXIS2_PLACEMENT_3D('',#443411,#443412,#443413); +#443411 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443412 = DIRECTION('',(0.,0.,1.)); +#443413 = DIRECTION('',(1.,0.,-0.)); +#443414 = SHELL_BASED_SURFACE_MODEL('',(#443415)); +#443415 = OPEN_SHELL('',(#443416)); +#443416 = ADVANCED_FACE('',(#443417),#443486,.T.); +#443417 = FACE_BOUND('',#443418,.F.); +#443418 = EDGE_LOOP('',(#443419,#443430,#443438,#443447,#443455,#443464, + #443472,#443480)); +#443419 = ORIENTED_EDGE('',*,*,#443420,.T.); +#443420 = EDGE_CURVE('',#443421,#443423,#443425,.T.); +#443421 = VERTEX_POINT('',#443422); +#443422 = CARTESIAN_POINT('',(123.194567,-102.302039,1.585)); +#443423 = VERTEX_POINT('',#443424); +#443424 = CARTESIAN_POINT('',(123.31,-102.325,1.585)); +#443425 = CIRCLE('',#443426,6.000007318647E-02); +#443426 = AXIS2_PLACEMENT_3D('',#443427,#443428,#443429); +#443427 = CARTESIAN_POINT('',(123.24999992681,-102.3249998233,1.585)); +#443428 = DIRECTION('',(0.,0.,-1.)); +#443429 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#443430 = ORIENTED_EDGE('',*,*,#443431,.T.); +#443431 = EDGE_CURVE('',#443423,#443432,#443434,.T.); +#443432 = VERTEX_POINT('',#443433); +#443433 = CARTESIAN_POINT('',(123.31,-102.925,1.585)); +#443434 = LINE('',#443435,#443436); +#443435 = CARTESIAN_POINT('',(123.31,-102.325,1.585)); +#443436 = VECTOR('',#443437,1.); +#443437 = DIRECTION('',(0.,-1.,0.)); +#443438 = ORIENTED_EDGE('',*,*,#443439,.T.); +#443439 = EDGE_CURVE('',#443432,#443440,#443442,.T.); +#443440 = VERTEX_POINT('',#443441); +#443441 = CARTESIAN_POINT('',(123.25,-102.985,1.585)); +#443442 = CIRCLE('',#443443,5.999932016262E-02); +#443443 = AXIS2_PLACEMENT_3D('',#443444,#443445,#443446); +#443444 = CARTESIAN_POINT('',(123.25000067984,-102.9250006798,1.585)); +#443445 = DIRECTION('',(0.,0.,-1.)); +#443446 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#443447 = ORIENTED_EDGE('',*,*,#443448,.T.); +#443448 = EDGE_CURVE('',#443440,#443449,#443451,.T.); +#443449 = VERTEX_POINT('',#443450); +#443450 = CARTESIAN_POINT('',(122.25,-102.985,1.585)); +#443451 = LINE('',#443452,#443453); +#443452 = CARTESIAN_POINT('',(123.25,-102.985,1.585)); +#443453 = VECTOR('',#443454,1.); +#443454 = DIRECTION('',(-1.,0.,0.)); +#443455 = ORIENTED_EDGE('',*,*,#443456,.T.); +#443456 = EDGE_CURVE('',#443449,#443457,#443459,.T.); +#443457 = VERTEX_POINT('',#443458); +#443458 = CARTESIAN_POINT('',(122.25,-102.865,1.585)); +#443459 = CIRCLE('',#443460,6.000000000043E-02); +#443460 = AXIS2_PLACEMENT_3D('',#443461,#443462,#443463); +#443461 = CARTESIAN_POINT('',(122.24999977441,-102.925,1.585)); +#443462 = DIRECTION('',(0.,0.,-1.)); +#443463 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#443464 = ORIENTED_EDGE('',*,*,#443465,.T.); +#443465 = EDGE_CURVE('',#443457,#443466,#443468,.T.); +#443466 = VERTEX_POINT('',#443467); +#443467 = CARTESIAN_POINT('',(123.19,-102.865,1.585)); +#443468 = LINE('',#443469,#443470); +#443469 = CARTESIAN_POINT('',(122.25,-102.865,1.585)); +#443470 = VECTOR('',#443471,1.); +#443471 = DIRECTION('',(1.,0.,0.)); +#443472 = ORIENTED_EDGE('',*,*,#443473,.T.); +#443473 = EDGE_CURVE('',#443466,#443474,#443476,.T.); +#443474 = VERTEX_POINT('',#443475); +#443475 = CARTESIAN_POINT('',(123.19,-102.325,1.585)); +#443476 = LINE('',#443477,#443478); +#443477 = CARTESIAN_POINT('',(123.19,-102.865,1.585)); +#443478 = VECTOR('',#443479,1.); +#443479 = DIRECTION('',(0.,1.,0.)); +#443480 = ORIENTED_EDGE('',*,*,#443481,.T.); +#443481 = EDGE_CURVE('',#443474,#443421,#443482,.T.); +#443482 = LINE('',#443483,#443484); +#443483 = CARTESIAN_POINT('',(123.19,-102.325,1.585)); +#443484 = VECTOR('',#443485,1.); +#443485 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#443486 = PLANE('',#443487); +#443487 = AXIS2_PLACEMENT_3D('',#443488,#443489,#443490); +#443488 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443489 = DIRECTION('',(0.,0.,1.)); +#443490 = DIRECTION('',(1.,0.,-0.)); +#443491 = SHELL_BASED_SURFACE_MODEL('',(#443492)); +#443492 = OPEN_SHELL('',(#443493)); +#443493 = ADVANCED_FACE('',(#443494),#443563,.T.); +#443494 = FACE_BOUND('',#443495,.F.); +#443495 = EDGE_LOOP('',(#443496,#443507,#443515,#443523,#443532,#443540, + #443549,#443557)); +#443496 = ORIENTED_EDGE('',*,*,#443497,.T.); +#443497 = EDGE_CURVE('',#443498,#443500,#443502,.T.); +#443498 = VERTEX_POINT('',#443499); +#443499 = CARTESIAN_POINT('',(151.644567,-102.302039,1.585)); +#443500 = VERTEX_POINT('',#443501); +#443501 = CARTESIAN_POINT('',(151.76,-102.325,1.585)); +#443502 = CIRCLE('',#443503,6.000007318647E-02); +#443503 = AXIS2_PLACEMENT_3D('',#443504,#443505,#443506); +#443504 = CARTESIAN_POINT('',(151.69999992681,-102.3249998233,1.585)); +#443505 = DIRECTION('',(0.,0.,-1.)); +#443506 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#443507 = ORIENTED_EDGE('',*,*,#443508,.T.); +#443508 = EDGE_CURVE('',#443500,#443509,#443511,.T.); +#443509 = VERTEX_POINT('',#443510); +#443510 = CARTESIAN_POINT('',(151.76,-102.865,1.585)); +#443511 = LINE('',#443512,#443513); +#443512 = CARTESIAN_POINT('',(151.76,-102.325,1.585)); +#443513 = VECTOR('',#443514,1.); +#443514 = DIRECTION('',(0.,-1.,0.)); +#443515 = ORIENTED_EDGE('',*,*,#443516,.T.); +#443516 = EDGE_CURVE('',#443509,#443517,#443519,.T.); +#443517 = VERTEX_POINT('',#443518); +#443518 = CARTESIAN_POINT('',(152.7,-102.865,1.585)); +#443519 = LINE('',#443520,#443521); +#443520 = CARTESIAN_POINT('',(151.76,-102.865,1.585)); +#443521 = VECTOR('',#443522,1.); +#443522 = DIRECTION('',(1.,0.,0.)); +#443523 = ORIENTED_EDGE('',*,*,#443524,.T.); +#443524 = EDGE_CURVE('',#443517,#443525,#443527,.T.); +#443525 = VERTEX_POINT('',#443526); +#443526 = CARTESIAN_POINT('',(152.7,-102.985,1.585)); +#443527 = CIRCLE('',#443528,6.000000000043E-02); +#443528 = AXIS2_PLACEMENT_3D('',#443529,#443530,#443531); +#443529 = CARTESIAN_POINT('',(152.70000022558,-102.925,1.585)); +#443530 = DIRECTION('',(0.,0.,-1.)); +#443531 = DIRECTION('',(-3.759794253683E-06,0.999999999993,-0.)); +#443532 = ORIENTED_EDGE('',*,*,#443533,.T.); +#443533 = EDGE_CURVE('',#443525,#443534,#443536,.T.); +#443534 = VERTEX_POINT('',#443535); +#443535 = CARTESIAN_POINT('',(151.7,-102.985,1.585)); +#443536 = LINE('',#443537,#443538); +#443537 = CARTESIAN_POINT('',(152.7,-102.985,1.585)); +#443538 = VECTOR('',#443539,1.); +#443539 = DIRECTION('',(-1.,0.,0.)); +#443540 = ORIENTED_EDGE('',*,*,#443541,.T.); +#443541 = EDGE_CURVE('',#443534,#443542,#443544,.T.); +#443542 = VERTEX_POINT('',#443543); +#443543 = CARTESIAN_POINT('',(151.64,-102.925,1.585)); +#443544 = CIRCLE('',#443545,5.999932016258E-02); +#443545 = AXIS2_PLACEMENT_3D('',#443546,#443547,#443548); +#443546 = CARTESIAN_POINT('',(151.69999932015,-102.9250006798,1.585)); +#443547 = DIRECTION('',(0.,0.,-1.)); +#443548 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#443549 = ORIENTED_EDGE('',*,*,#443550,.T.); +#443550 = EDGE_CURVE('',#443542,#443551,#443553,.T.); +#443551 = VERTEX_POINT('',#443552); +#443552 = CARTESIAN_POINT('',(151.64,-102.325,1.585)); +#443553 = LINE('',#443554,#443555); +#443554 = CARTESIAN_POINT('',(151.64,-102.925,1.585)); +#443555 = VECTOR('',#443556,1.); +#443556 = DIRECTION('',(0.,1.,0.)); +#443557 = ORIENTED_EDGE('',*,*,#443558,.T.); +#443558 = EDGE_CURVE('',#443551,#443498,#443559,.T.); +#443559 = LINE('',#443560,#443561); +#443560 = CARTESIAN_POINT('',(151.64,-102.325,1.585)); +#443561 = VECTOR('',#443562,1.); +#443562 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#443563 = PLANE('',#443564); +#443564 = AXIS2_PLACEMENT_3D('',#443565,#443566,#443567); +#443565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443566 = DIRECTION('',(0.,0.,1.)); +#443567 = DIRECTION('',(1.,0.,-0.)); +#443568 = SHELL_BASED_SURFACE_MODEL('',(#443569)); +#443569 = OPEN_SHELL('',(#443570)); +#443570 = ADVANCED_FACE('',(#443571),#443615,.T.); +#443571 = FACE_BOUND('',#443572,.F.); +#443572 = EDGE_LOOP('',(#443573,#443584,#443592,#443601,#443609)); +#443573 = ORIENTED_EDGE('',*,*,#443574,.T.); +#443574 = EDGE_CURVE('',#443575,#443577,#443579,.T.); +#443575 = VERTEX_POINT('',#443576); +#443576 = CARTESIAN_POINT('',(120.394567,-99.502039,1.585)); +#443577 = VERTEX_POINT('',#443578); +#443578 = CARTESIAN_POINT('',(120.51,-99.525,1.585)); +#443579 = CIRCLE('',#443580,6.000007318648E-02); +#443580 = AXIS2_PLACEMENT_3D('',#443581,#443582,#443583); +#443581 = CARTESIAN_POINT('',(120.44999992681,-99.52499982331,1.585)); +#443582 = DIRECTION('',(0.,0.,-1.)); +#443583 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#443584 = ORIENTED_EDGE('',*,*,#443585,.T.); +#443585 = EDGE_CURVE('',#443577,#443586,#443588,.T.); +#443586 = VERTEX_POINT('',#443587); +#443587 = CARTESIAN_POINT('',(120.51,-101.525,1.585)); +#443588 = LINE('',#443589,#443590); +#443589 = CARTESIAN_POINT('',(120.51,-99.525,1.585)); +#443590 = VECTOR('',#443591,1.); +#443591 = DIRECTION('',(0.,-1.,0.)); +#443592 = ORIENTED_EDGE('',*,*,#443593,.T.); +#443593 = EDGE_CURVE('',#443586,#443594,#443596,.T.); +#443594 = VERTEX_POINT('',#443595); +#443595 = CARTESIAN_POINT('',(120.39,-101.525,1.585)); +#443596 = CIRCLE('',#443597,6.000000000043E-02); +#443597 = AXIS2_PLACEMENT_3D('',#443598,#443599,#443600); +#443598 = CARTESIAN_POINT('',(120.45,-101.5250002255,1.585)); +#443599 = DIRECTION('',(0.,0.,-1.)); +#443600 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#443601 = ORIENTED_EDGE('',*,*,#443602,.T.); +#443602 = EDGE_CURVE('',#443594,#443603,#443605,.T.); +#443603 = VERTEX_POINT('',#443604); +#443604 = CARTESIAN_POINT('',(120.39,-99.525,1.585)); +#443605 = LINE('',#443606,#443607); +#443606 = CARTESIAN_POINT('',(120.39,-101.525,1.585)); +#443607 = VECTOR('',#443608,1.); +#443608 = DIRECTION('',(0.,1.,0.)); +#443609 = ORIENTED_EDGE('',*,*,#443610,.T.); +#443610 = EDGE_CURVE('',#443603,#443575,#443611,.T.); +#443611 = LINE('',#443612,#443613); +#443612 = CARTESIAN_POINT('',(120.39,-99.525,1.585)); +#443613 = VECTOR('',#443614,1.); +#443614 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#443615 = PLANE('',#443616); +#443616 = AXIS2_PLACEMENT_3D('',#443617,#443618,#443619); +#443617 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443618 = DIRECTION('',(0.,0.,1.)); +#443619 = DIRECTION('',(1.,0.,-0.)); +#443620 = SHELL_BASED_SURFACE_MODEL('',(#443621)); +#443621 = OPEN_SHELL('',(#443622)); +#443622 = ADVANCED_FACE('',(#443623),#443667,.T.); +#443623 = FACE_BOUND('',#443624,.F.); +#443624 = EDGE_LOOP('',(#443625,#443636,#443644,#443653,#443661)); +#443625 = ORIENTED_EDGE('',*,*,#443626,.T.); +#443626 = EDGE_CURVE('',#443627,#443629,#443631,.T.); +#443627 = VERTEX_POINT('',#443628); +#443628 = CARTESIAN_POINT('',(154.444567,-99.502039,1.585)); +#443629 = VERTEX_POINT('',#443630); +#443630 = CARTESIAN_POINT('',(154.56,-99.525,1.585)); +#443631 = CIRCLE('',#443632,6.000007318647E-02); +#443632 = AXIS2_PLACEMENT_3D('',#443633,#443634,#443635); +#443633 = CARTESIAN_POINT('',(154.49999992681,-99.52499982331,1.585)); +#443634 = DIRECTION('',(0.,0.,-1.)); +#443635 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#443636 = ORIENTED_EDGE('',*,*,#443637,.T.); +#443637 = EDGE_CURVE('',#443629,#443638,#443640,.T.); +#443638 = VERTEX_POINT('',#443639); +#443639 = CARTESIAN_POINT('',(154.56,-101.525,1.585)); +#443640 = LINE('',#443641,#443642); +#443641 = CARTESIAN_POINT('',(154.56,-99.525,1.585)); +#443642 = VECTOR('',#443643,1.); +#443643 = DIRECTION('',(0.,-1.,0.)); +#443644 = ORIENTED_EDGE('',*,*,#443645,.T.); +#443645 = EDGE_CURVE('',#443638,#443646,#443648,.T.); +#443646 = VERTEX_POINT('',#443647); +#443647 = CARTESIAN_POINT('',(154.44,-101.525,1.585)); +#443648 = CIRCLE('',#443649,6.000000000043E-02); +#443649 = AXIS2_PLACEMENT_3D('',#443650,#443651,#443652); +#443650 = CARTESIAN_POINT('',(154.5,-101.5250002255,1.585)); +#443651 = DIRECTION('',(0.,0.,-1.)); +#443652 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#443653 = ORIENTED_EDGE('',*,*,#443654,.T.); +#443654 = EDGE_CURVE('',#443646,#443655,#443657,.T.); +#443655 = VERTEX_POINT('',#443656); +#443656 = CARTESIAN_POINT('',(154.44,-99.525,1.585)); +#443657 = LINE('',#443658,#443659); +#443658 = CARTESIAN_POINT('',(154.44,-101.525,1.585)); +#443659 = VECTOR('',#443660,1.); +#443660 = DIRECTION('',(0.,1.,0.)); +#443661 = ORIENTED_EDGE('',*,*,#443662,.T.); +#443662 = EDGE_CURVE('',#443655,#443627,#443663,.T.); +#443663 = LINE('',#443664,#443665); +#443664 = CARTESIAN_POINT('',(154.44,-99.525,1.585)); +#443665 = VECTOR('',#443666,1.); +#443666 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#443667 = PLANE('',#443668); +#443668 = AXIS2_PLACEMENT_3D('',#443669,#443670,#443671); +#443669 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443670 = DIRECTION('',(0.,0.,1.)); +#443671 = DIRECTION('',(1.,0.,-0.)); +#443672 = SHELL_BASED_SURFACE_MODEL('',(#443673)); +#443673 = OPEN_SHELL('',(#443674)); +#443674 = ADVANCED_FACE('',(#443675),#443775,.T.); +#443675 = FACE_BOUND('',#443676,.F.); +#443676 = EDGE_LOOP('',(#443677,#443687,#443695,#443703,#443712,#443720, + #443729,#443737,#443745,#443753,#443761,#443769)); +#443677 = ORIENTED_EDGE('',*,*,#443678,.T.); +#443678 = EDGE_CURVE('',#443679,#443681,#443683,.T.); +#443679 = VERTEX_POINT('',#443680); +#443680 = CARTESIAN_POINT('',(144.515502,-90.5984,1.585)); +#443681 = VERTEX_POINT('',#443682); +#443682 = CARTESIAN_POINT('',(144.566629,-90.474971,1.585)); +#443683 = LINE('',#443684,#443685); +#443684 = CARTESIAN_POINT('',(144.515502,-90.5984,1.585)); +#443685 = VECTOR('',#443686,1.); +#443686 = DIRECTION('',(0.382690039841,0.923876795578,0.)); +#443687 = ORIENTED_EDGE('',*,*,#443688,.T.); +#443688 = EDGE_CURVE('',#443681,#443689,#443691,.T.); +#443689 = VERTEX_POINT('',#443690); +#443690 = CARTESIAN_POINT('',(144.581484,-90.400284,1.585)); +#443691 = LINE('',#443692,#443693); +#443692 = CARTESIAN_POINT('',(144.566629,-90.474971,1.585)); +#443693 = VECTOR('',#443694,1.); +#443694 = DIRECTION('',(0.195075567836,0.980788215077,0.)); +#443695 = ORIENTED_EDGE('',*,*,#443696,.T.); +#443696 = EDGE_CURVE('',#443689,#443697,#443699,.T.); +#443697 = VERTEX_POINT('',#443698); +#443698 = CARTESIAN_POINT('',(146.919509,-90.401921,1.585)); +#443699 = LINE('',#443700,#443701); +#443700 = CARTESIAN_POINT('',(144.581484,-90.400284,1.585)); +#443701 = VECTOR('',#443702,1.); +#443702 = DIRECTION('',(0.999999754886,-7.001634280001E-04,0.)); +#443703 = ORIENTED_EDGE('',*,*,#443704,.T.); +#443704 = EDGE_CURVE('',#443697,#443705,#443707,.T.); +#443705 = VERTEX_POINT('',#443706); +#443706 = CARTESIAN_POINT('',(146.998079,-90.480491,1.585)); +#443707 = CIRCLE('',#443708,0.100002891901); +#443708 = AXIS2_PLACEMENT_3D('',#443709,#443710,#443711); +#443709 = CARTESIAN_POINT('',(146.89999792896,-90.50000207103,1.585)); +#443710 = DIRECTION('',(0.,0.,-1.)); +#443711 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#443712 = ORIENTED_EDGE('',*,*,#443713,.T.); +#443713 = EDGE_CURVE('',#443705,#443714,#443716,.T.); +#443714 = VERTEX_POINT('',#443715); +#443715 = CARTESIAN_POINT('',(146.998079,-100.019509,1.585)); +#443716 = LINE('',#443717,#443718); +#443717 = CARTESIAN_POINT('',(146.998079,-90.480491,1.585)); +#443718 = VECTOR('',#443719,1.); +#443719 = DIRECTION('',(0.,-1.,0.)); +#443720 = ORIENTED_EDGE('',*,*,#443721,.T.); +#443721 = EDGE_CURVE('',#443714,#443722,#443724,.T.); +#443722 = VERTEX_POINT('',#443723); +#443723 = CARTESIAN_POINT('',(146.919509,-100.098079,1.585)); +#443724 = CIRCLE('',#443725,0.100002891901); +#443725 = AXIS2_PLACEMENT_3D('',#443726,#443727,#443728); +#443726 = CARTESIAN_POINT('',(146.89999792896,-99.99999792896,1.585)); +#443727 = DIRECTION('',(0.,0.,-1.)); +#443728 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#443729 = ORIENTED_EDGE('',*,*,#443730,.T.); +#443730 = EDGE_CURVE('',#443722,#443731,#443733,.T.); +#443731 = VERTEX_POINT('',#443732); +#443732 = CARTESIAN_POINT('',(144.581484,-100.099715,1.585)); +#443733 = LINE('',#443734,#443735); +#443734 = CARTESIAN_POINT('',(146.919509,-100.098079,1.585)); +#443735 = VECTOR('',#443736,1.); +#443736 = DIRECTION('',(-0.999999755185,-6.997357168924E-04,0.)); +#443737 = ORIENTED_EDGE('',*,*,#443738,.T.); +#443738 = EDGE_CURVE('',#443731,#443739,#443741,.T.); +#443739 = VERTEX_POINT('',#443740); +#443740 = CARTESIAN_POINT('',(144.566629,-100.025029,1.585)); +#443741 = LINE('',#443742,#443743); +#443742 = CARTESIAN_POINT('',(144.581484,-100.099715,1.585)); +#443743 = VECTOR('',#443744,1.); +#443744 = DIRECTION('',(-0.195078080381,0.980787715337,0.)); +#443745 = ORIENTED_EDGE('',*,*,#443746,.T.); +#443746 = EDGE_CURVE('',#443739,#443747,#443749,.T.); +#443747 = VERTEX_POINT('',#443748); +#443748 = CARTESIAN_POINT('',(144.515502,-99.901599,1.585)); +#443749 = LINE('',#443750,#443751); +#443750 = CARTESIAN_POINT('',(144.566629,-100.025029,1.585)); +#443751 = VECTOR('',#443752,1.); +#443752 = DIRECTION('',(-0.382687393442,0.92387789177,0.)); +#443753 = ORIENTED_EDGE('',*,*,#443754,.T.); +#443754 = EDGE_CURVE('',#443747,#443755,#443757,.T.); +#443755 = VERTEX_POINT('',#443756); +#443756 = CARTESIAN_POINT('',(146.8,-99.9,1.585)); +#443757 = LINE('',#443758,#443759); +#443758 = CARTESIAN_POINT('',(144.515502,-99.901599,1.585)); +#443759 = VECTOR('',#443760,1.); +#443760 = DIRECTION('',(0.999999755046,6.999347814341E-04,0.)); +#443761 = ORIENTED_EDGE('',*,*,#443762,.T.); +#443762 = EDGE_CURVE('',#443755,#443763,#443765,.T.); +#443763 = VERTEX_POINT('',#443764); +#443764 = CARTESIAN_POINT('',(146.8,-90.6,1.585)); +#443765 = LINE('',#443766,#443767); +#443766 = CARTESIAN_POINT('',(146.8,-99.9,1.585)); +#443767 = VECTOR('',#443768,1.); +#443768 = DIRECTION('',(0.,1.,0.)); +#443769 = ORIENTED_EDGE('',*,*,#443770,.T.); +#443770 = EDGE_CURVE('',#443763,#443679,#443771,.T.); +#443771 = LINE('',#443772,#443773); +#443772 = CARTESIAN_POINT('',(146.8,-90.6,1.585)); +#443773 = VECTOR('',#443774,1.); +#443774 = DIRECTION('',(-0.999999754739,7.003725140398E-04,0.)); +#443775 = PLANE('',#443776); +#443776 = AXIS2_PLACEMENT_3D('',#443777,#443778,#443779); +#443777 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443778 = DIRECTION('',(0.,0.,1.)); +#443779 = DIRECTION('',(1.,0.,-0.)); +#443780 = SHELL_BASED_SURFACE_MODEL('',(#443781)); +#443781 = OPEN_SHELL('',(#443782)); +#443782 = ADVANCED_FACE('',(#443783),#443833,.T.); +#443783 = FACE_BOUND('',#443784,.F.); +#443784 = EDGE_LOOP('',(#443785,#443795,#443803,#443811,#443819,#443827) + ); +#443785 = ORIENTED_EDGE('',*,*,#443786,.T.); +#443786 = EDGE_CURVE('',#443787,#443789,#443791,.T.); +#443787 = VERTEX_POINT('',#443788); +#443788 = CARTESIAN_POINT('',(130.950029,-99.508371,1.585)); +#443789 = VERTEX_POINT('',#443790); +#443790 = CARTESIAN_POINT('',(130.826921,-99.559364,1.585)); +#443791 = LINE('',#443792,#443793); +#443792 = CARTESIAN_POINT('',(130.950029,-99.508371,1.585)); +#443793 = VECTOR('',#443794,1.); +#443794 = DIRECTION('',(-0.923879541099,-0.382683411633,0.)); +#443795 = ORIENTED_EDGE('',*,*,#443796,.T.); +#443796 = EDGE_CURVE('',#443789,#443797,#443799,.T.); +#443797 = VERTEX_POINT('',#443798); +#443798 = CARTESIAN_POINT('',(130.826921,-90.940635,1.585)); +#443799 = LINE('',#443800,#443801); +#443800 = CARTESIAN_POINT('',(130.826921,-99.559364,1.585)); +#443801 = VECTOR('',#443802,1.); +#443802 = DIRECTION('',(0.,1.,0.)); +#443803 = ORIENTED_EDGE('',*,*,#443804,.T.); +#443804 = EDGE_CURVE('',#443797,#443805,#443807,.T.); +#443805 = VERTEX_POINT('',#443806); +#443806 = CARTESIAN_POINT('',(130.950029,-90.991629,1.585)); +#443807 = LINE('',#443808,#443809); +#443808 = CARTESIAN_POINT('',(130.826921,-90.940635,1.585)); +#443809 = VECTOR('',#443810,1.); +#443810 = DIRECTION('',(0.923876887798,-0.382689817204,0.)); +#443811 = ORIENTED_EDGE('',*,*,#443812,.T.); +#443812 = EDGE_CURVE('',#443805,#443813,#443815,.T.); +#443813 = VERTEX_POINT('',#443814); +#443814 = CARTESIAN_POINT('',(131.025,-91.006541,1.585)); +#443815 = LINE('',#443816,#443817); +#443816 = CARTESIAN_POINT('',(130.950029,-90.991629,1.585)); +#443817 = VECTOR('',#443818,1.); +#443818 = DIRECTION('',(0.980786930197,-0.195082027759,0.)); +#443819 = ORIENTED_EDGE('',*,*,#443820,.T.); +#443820 = EDGE_CURVE('',#443813,#443821,#443823,.T.); +#443821 = VERTEX_POINT('',#443822); +#443822 = CARTESIAN_POINT('',(131.025,-99.493458,1.585)); +#443823 = LINE('',#443824,#443825); +#443824 = CARTESIAN_POINT('',(131.025,-91.006541,1.585)); +#443825 = VECTOR('',#443826,1.); +#443826 = DIRECTION('',(0.,-1.,0.)); +#443827 = ORIENTED_EDGE('',*,*,#443828,.T.); +#443828 = EDGE_CURVE('',#443821,#443787,#443829,.T.); +#443829 = LINE('',#443830,#443831); +#443830 = CARTESIAN_POINT('',(131.025,-99.493458,1.585)); +#443831 = VECTOR('',#443832,1.); +#443832 = DIRECTION('',(-0.980784427051,-0.195094612058,0.)); +#443833 = PLANE('',#443834); +#443834 = AXIS2_PLACEMENT_3D('',#443835,#443836,#443837); +#443835 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443836 = DIRECTION('',(0.,0.,1.)); +#443837 = DIRECTION('',(1.,0.,-0.)); +#443838 = SHELL_BASED_SURFACE_MODEL('',(#443839)); +#443839 = OPEN_SHELL('',(#443840)); +#443840 = ADVANCED_FACE('',(#443841),#443902,.T.); +#443841 = FACE_BOUND('',#443842,.F.); +#443842 = EDGE_LOOP('',(#443843,#443854,#443862,#443871,#443879,#443888, + #443896)); +#443843 = ORIENTED_EDGE('',*,*,#443844,.T.); +#443844 = EDGE_CURVE('',#443845,#443847,#443849,.T.); +#443845 = VERTEX_POINT('',#443846); +#443846 = CARTESIAN_POINT('',(122.25,-98.185,1.585)); +#443847 = VERTEX_POINT('',#443848); +#443848 = CARTESIAN_POINT('',(122.25,-98.065,1.585)); +#443849 = CIRCLE('',#443850,6.000000000042E-02); +#443850 = AXIS2_PLACEMENT_3D('',#443851,#443852,#443853); +#443851 = CARTESIAN_POINT('',(122.24999977441,-98.125,1.585)); +#443852 = DIRECTION('',(0.,0.,-1.)); +#443853 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#443854 = ORIENTED_EDGE('',*,*,#443855,.T.); +#443855 = EDGE_CURVE('',#443847,#443856,#443858,.T.); +#443856 = VERTEX_POINT('',#443857); +#443857 = CARTESIAN_POINT('',(123.25,-98.065,1.585)); +#443858 = LINE('',#443859,#443860); +#443859 = CARTESIAN_POINT('',(122.25,-98.065,1.585)); +#443860 = VECTOR('',#443861,1.); +#443861 = DIRECTION('',(1.,0.,0.)); +#443862 = ORIENTED_EDGE('',*,*,#443863,.T.); +#443863 = EDGE_CURVE('',#443856,#443864,#443866,.T.); +#443864 = VERTEX_POINT('',#443865); +#443865 = CARTESIAN_POINT('',(123.31,-98.125,1.585)); +#443866 = CIRCLE('',#443867,5.999932016263E-02); +#443867 = AXIS2_PLACEMENT_3D('',#443868,#443869,#443870); +#443868 = CARTESIAN_POINT('',(123.25000067984,-98.12499932015,1.585)); +#443869 = DIRECTION('',(0.,0.,-1.)); +#443870 = DIRECTION('',(-1.133081541087E-05,0.999999999936,0.)); +#443871 = ORIENTED_EDGE('',*,*,#443872,.T.); +#443872 = EDGE_CURVE('',#443864,#443873,#443875,.T.); +#443873 = VERTEX_POINT('',#443874); +#443874 = CARTESIAN_POINT('',(123.31,-98.725,1.585)); +#443875 = LINE('',#443876,#443877); +#443876 = CARTESIAN_POINT('',(123.31,-98.125,1.585)); +#443877 = VECTOR('',#443878,1.); +#443878 = DIRECTION('',(0.,-1.,0.)); +#443879 = ORIENTED_EDGE('',*,*,#443880,.T.); +#443880 = EDGE_CURVE('',#443873,#443881,#443883,.T.); +#443881 = VERTEX_POINT('',#443882); +#443882 = CARTESIAN_POINT('',(123.19,-98.725,1.585)); +#443883 = CIRCLE('',#443884,6.000000000043E-02); +#443884 = AXIS2_PLACEMENT_3D('',#443885,#443886,#443887); +#443885 = CARTESIAN_POINT('',(123.25,-98.72500022558,1.585)); +#443886 = DIRECTION('',(0.,0.,-1.)); +#443887 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#443888 = ORIENTED_EDGE('',*,*,#443889,.T.); +#443889 = EDGE_CURVE('',#443881,#443890,#443892,.T.); +#443890 = VERTEX_POINT('',#443891); +#443891 = CARTESIAN_POINT('',(123.19,-98.185,1.585)); +#443892 = LINE('',#443893,#443894); +#443893 = CARTESIAN_POINT('',(123.19,-98.725,1.585)); +#443894 = VECTOR('',#443895,1.); +#443895 = DIRECTION('',(0.,1.,0.)); +#443896 = ORIENTED_EDGE('',*,*,#443897,.T.); +#443897 = EDGE_CURVE('',#443890,#443845,#443898,.T.); +#443898 = LINE('',#443899,#443900); +#443899 = CARTESIAN_POINT('',(123.19,-98.185,1.585)); +#443900 = VECTOR('',#443901,1.); +#443901 = DIRECTION('',(-1.,0.,0.)); +#443902 = PLANE('',#443903); +#443903 = AXIS2_PLACEMENT_3D('',#443904,#443905,#443906); +#443904 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443905 = DIRECTION('',(0.,0.,1.)); +#443906 = DIRECTION('',(1.,0.,-0.)); +#443907 = SHELL_BASED_SURFACE_MODEL('',(#443908)); +#443908 = OPEN_SHELL('',(#443909)); +#443909 = ADVANCED_FACE('',(#443910),#443971,.T.); +#443910 = FACE_BOUND('',#443911,.F.); +#443911 = EDGE_LOOP('',(#443912,#443923,#443931,#443940,#443948,#443956, + #443965)); +#443912 = ORIENTED_EDGE('',*,*,#443913,.T.); +#443913 = EDGE_CURVE('',#443914,#443916,#443918,.T.); +#443914 = VERTEX_POINT('',#443915); +#443915 = CARTESIAN_POINT('',(151.64,-98.125,1.585)); +#443916 = VERTEX_POINT('',#443917); +#443917 = CARTESIAN_POINT('',(151.7,-98.065,1.585)); +#443918 = CIRCLE('',#443919,5.999932016264E-02); +#443919 = AXIS2_PLACEMENT_3D('',#443920,#443921,#443922); +#443920 = CARTESIAN_POINT('',(151.69999932015,-98.12499932015,1.585)); +#443921 = DIRECTION('',(0.,0.,-1.)); +#443922 = DIRECTION('',(-0.999999999936,-1.133081541086E-05,-0.)); +#443923 = ORIENTED_EDGE('',*,*,#443924,.T.); +#443924 = EDGE_CURVE('',#443916,#443925,#443927,.T.); +#443925 = VERTEX_POINT('',#443926); +#443926 = CARTESIAN_POINT('',(152.7,-98.065,1.585)); +#443927 = LINE('',#443928,#443929); +#443928 = CARTESIAN_POINT('',(151.7,-98.065,1.585)); +#443929 = VECTOR('',#443930,1.); +#443930 = DIRECTION('',(1.,0.,0.)); +#443931 = ORIENTED_EDGE('',*,*,#443932,.T.); +#443932 = EDGE_CURVE('',#443925,#443933,#443935,.T.); +#443933 = VERTEX_POINT('',#443934); +#443934 = CARTESIAN_POINT('',(152.7,-98.185,1.585)); +#443935 = CIRCLE('',#443936,6.000000000043E-02); +#443936 = AXIS2_PLACEMENT_3D('',#443937,#443938,#443939); +#443937 = CARTESIAN_POINT('',(152.70000022558,-98.125,1.585)); +#443938 = DIRECTION('',(0.,0.,-1.)); +#443939 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#443940 = ORIENTED_EDGE('',*,*,#443941,.T.); +#443941 = EDGE_CURVE('',#443933,#443942,#443944,.T.); +#443942 = VERTEX_POINT('',#443943); +#443943 = CARTESIAN_POINT('',(151.76,-98.185,1.585)); +#443944 = LINE('',#443945,#443946); +#443945 = CARTESIAN_POINT('',(152.7,-98.185,1.585)); +#443946 = VECTOR('',#443947,1.); +#443947 = DIRECTION('',(-1.,0.,0.)); +#443948 = ORIENTED_EDGE('',*,*,#443949,.T.); +#443949 = EDGE_CURVE('',#443942,#443950,#443952,.T.); +#443950 = VERTEX_POINT('',#443951); +#443951 = CARTESIAN_POINT('',(151.76,-98.725,1.585)); +#443952 = LINE('',#443953,#443954); +#443953 = CARTESIAN_POINT('',(151.76,-98.185,1.585)); +#443954 = VECTOR('',#443955,1.); +#443955 = DIRECTION('',(0.,-1.,0.)); +#443956 = ORIENTED_EDGE('',*,*,#443957,.T.); +#443957 = EDGE_CURVE('',#443950,#443958,#443960,.T.); +#443958 = VERTEX_POINT('',#443959); +#443959 = CARTESIAN_POINT('',(151.64,-98.725,1.585)); +#443960 = CIRCLE('',#443961,6.000000000043E-02); +#443961 = AXIS2_PLACEMENT_3D('',#443962,#443963,#443964); +#443962 = CARTESIAN_POINT('',(151.7,-98.72500022558,1.585)); +#443963 = DIRECTION('',(0.,0.,-1.)); +#443964 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#443965 = ORIENTED_EDGE('',*,*,#443966,.T.); +#443966 = EDGE_CURVE('',#443958,#443914,#443967,.T.); +#443967 = LINE('',#443968,#443969); +#443968 = CARTESIAN_POINT('',(151.64,-98.725,1.585)); +#443969 = VECTOR('',#443970,1.); +#443970 = DIRECTION('',(0.,1.,0.)); +#443971 = PLANE('',#443972); +#443972 = AXIS2_PLACEMENT_3D('',#443973,#443974,#443975); +#443973 = CARTESIAN_POINT('',(0.,0.,1.585)); +#443974 = DIRECTION('',(0.,0.,1.)); +#443975 = DIRECTION('',(1.,0.,-0.)); +#443976 = SHELL_BASED_SURFACE_MODEL('',(#443977)); +#443977 = OPEN_SHELL('',(#443978)); +#443978 = ADVANCED_FACE('',(#443979,#443990),#444001,.T.); +#443979 = FACE_BOUND('',#443980,.T.); +#443980 = EDGE_LOOP('',(#443981)); +#443981 = ORIENTED_EDGE('',*,*,#443982,.T.); +#443982 = EDGE_CURVE('',#443983,#443983,#443985,.T.); +#443983 = VERTEX_POINT('',#443984); +#443984 = CARTESIAN_POINT('',(138.6,-95.25,1.585)); +#443985 = CIRCLE('',#443986,1.1); +#443986 = AXIS2_PLACEMENT_3D('',#443987,#443988,#443989); +#443987 = CARTESIAN_POINT('',(137.5,-95.25,1.585)); +#443988 = DIRECTION('',(0.,0.,1.)); +#443989 = DIRECTION('',(1.,0.,-0.)); +#443990 = FACE_BOUND('',#443991,.F.); +#443991 = EDGE_LOOP('',(#443992)); +#443992 = ORIENTED_EDGE('',*,*,#443993,.T.); +#443993 = EDGE_CURVE('',#443994,#443994,#443996,.T.); +#443994 = VERTEX_POINT('',#443995); +#443995 = CARTESIAN_POINT('',(138.404355,-95.25,1.585)); +#443996 = CIRCLE('',#443997,0.904355); +#443997 = AXIS2_PLACEMENT_3D('',#443998,#443999,#444000); +#443998 = CARTESIAN_POINT('',(137.5,-95.25,1.585)); +#443999 = DIRECTION('',(0.,0.,1.)); +#444000 = DIRECTION('',(1.,0.,-0.)); +#444001 = PLANE('',#444002); +#444002 = AXIS2_PLACEMENT_3D('',#444003,#444004,#444005); +#444003 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444004 = DIRECTION('',(0.,0.,1.)); +#444005 = DIRECTION('',(1.,0.,-0.)); +#444006 = SHELL_BASED_SURFACE_MODEL('',(#444007)); +#444007 = OPEN_SHELL('',(#444008)); +#444008 = ADVANCED_FACE('',(#444009),#444053,.T.); +#444009 = FACE_BOUND('',#444010,.F.); +#444010 = EDGE_LOOP('',(#444011,#444022,#444030,#444039,#444047)); +#444011 = ORIENTED_EDGE('',*,*,#444012,.T.); +#444012 = EDGE_CURVE('',#444013,#444015,#444017,.T.); +#444013 = VERTEX_POINT('',#444014); +#444014 = CARTESIAN_POINT('',(148.084567,-92.869203,1.585)); +#444015 = VERTEX_POINT('',#444016); +#444016 = CARTESIAN_POINT('',(148.2,-92.892164,1.585)); +#444017 = CIRCLE('',#444018,6.000007318647E-02); +#444018 = AXIS2_PLACEMENT_3D('',#444019,#444020,#444021); +#444019 = CARTESIAN_POINT('',(148.13999992681,-92.89216382331,1.585)); +#444020 = DIRECTION('',(0.,0.,-1.)); +#444021 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444022 = ORIENTED_EDGE('',*,*,#444023,.T.); +#444023 = EDGE_CURVE('',#444015,#444024,#444026,.T.); +#444024 = VERTEX_POINT('',#444025); +#444025 = CARTESIAN_POINT('',(148.2,-93.107836,1.585)); +#444026 = LINE('',#444027,#444028); +#444027 = CARTESIAN_POINT('',(148.2,-92.892164,1.585)); +#444028 = VECTOR('',#444029,1.); +#444029 = DIRECTION('',(0.,-1.,0.)); +#444030 = ORIENTED_EDGE('',*,*,#444031,.T.); +#444031 = EDGE_CURVE('',#444024,#444032,#444034,.T.); +#444032 = VERTEX_POINT('',#444033); +#444033 = CARTESIAN_POINT('',(148.08,-93.107836,1.585)); +#444034 = CIRCLE('',#444035,6.000000000041E-02); +#444035 = AXIS2_PLACEMENT_3D('',#444036,#444037,#444038); +#444036 = CARTESIAN_POINT('',(148.14,-93.10783622558,1.585)); +#444037 = DIRECTION('',(0.,0.,-1.)); +#444038 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#444039 = ORIENTED_EDGE('',*,*,#444040,.T.); +#444040 = EDGE_CURVE('',#444032,#444041,#444043,.T.); +#444041 = VERTEX_POINT('',#444042); +#444042 = CARTESIAN_POINT('',(148.08,-92.892164,1.585)); +#444043 = LINE('',#444044,#444045); +#444044 = CARTESIAN_POINT('',(148.08,-93.107836,1.585)); +#444045 = VECTOR('',#444046,1.); +#444046 = DIRECTION('',(0.,1.,0.)); +#444047 = ORIENTED_EDGE('',*,*,#444048,.T.); +#444048 = EDGE_CURVE('',#444041,#444013,#444049,.T.); +#444049 = LINE('',#444050,#444051); +#444050 = CARTESIAN_POINT('',(148.08,-92.892164,1.585)); +#444051 = VECTOR('',#444052,1.); +#444052 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#444053 = PLANE('',#444054); +#444054 = AXIS2_PLACEMENT_3D('',#444055,#444056,#444057); +#444055 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444056 = DIRECTION('',(0.,0.,1.)); +#444057 = DIRECTION('',(1.,0.,-0.)); +#444058 = SHELL_BASED_SURFACE_MODEL('',(#444059)); +#444059 = OPEN_SHELL('',(#444060)); +#444060 = ADVANCED_FACE('',(#444061),#444105,.T.); +#444061 = FACE_BOUND('',#444062,.F.); +#444062 = EDGE_LOOP('',(#444063,#444074,#444082,#444091,#444099)); +#444063 = ORIENTED_EDGE('',*,*,#444064,.T.); +#444064 = EDGE_CURVE('',#444065,#444067,#444069,.T.); +#444065 = VERTEX_POINT('',#444066); +#444066 = CARTESIAN_POINT('',(148.804567,-92.869203,1.585)); +#444067 = VERTEX_POINT('',#444068); +#444068 = CARTESIAN_POINT('',(148.92,-92.892164,1.585)); +#444069 = CIRCLE('',#444070,6.000007318647E-02); +#444070 = AXIS2_PLACEMENT_3D('',#444071,#444072,#444073); +#444071 = CARTESIAN_POINT('',(148.85999992681,-92.89216382331,1.585)); +#444072 = DIRECTION('',(0.,0.,-1.)); +#444073 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444074 = ORIENTED_EDGE('',*,*,#444075,.T.); +#444075 = EDGE_CURVE('',#444067,#444076,#444078,.T.); +#444076 = VERTEX_POINT('',#444077); +#444077 = CARTESIAN_POINT('',(148.92,-93.107836,1.585)); +#444078 = LINE('',#444079,#444080); +#444079 = CARTESIAN_POINT('',(148.92,-92.892164,1.585)); +#444080 = VECTOR('',#444081,1.); +#444081 = DIRECTION('',(0.,-1.,0.)); +#444082 = ORIENTED_EDGE('',*,*,#444083,.T.); +#444083 = EDGE_CURVE('',#444076,#444084,#444086,.T.); +#444084 = VERTEX_POINT('',#444085); +#444085 = CARTESIAN_POINT('',(148.8,-93.107836,1.585)); +#444086 = CIRCLE('',#444087,6.000000000042E-02); +#444087 = AXIS2_PLACEMENT_3D('',#444088,#444089,#444090); +#444088 = CARTESIAN_POINT('',(148.86,-93.10783622558,1.585)); +#444089 = DIRECTION('',(0.,0.,-1.)); +#444090 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#444091 = ORIENTED_EDGE('',*,*,#444092,.T.); +#444092 = EDGE_CURVE('',#444084,#444093,#444095,.T.); +#444093 = VERTEX_POINT('',#444094); +#444094 = CARTESIAN_POINT('',(148.8,-92.892164,1.585)); +#444095 = LINE('',#444096,#444097); +#444096 = CARTESIAN_POINT('',(148.8,-93.107836,1.585)); +#444097 = VECTOR('',#444098,1.); +#444098 = DIRECTION('',(0.,1.,0.)); +#444099 = ORIENTED_EDGE('',*,*,#444100,.T.); +#444100 = EDGE_CURVE('',#444093,#444065,#444101,.T.); +#444101 = LINE('',#444102,#444103); +#444102 = CARTESIAN_POINT('',(148.8,-92.892164,1.585)); +#444103 = VECTOR('',#444104,1.); +#444104 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#444105 = PLANE('',#444106); +#444106 = AXIS2_PLACEMENT_3D('',#444107,#444108,#444109); +#444107 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444108 = DIRECTION('',(0.,0.,1.)); +#444109 = DIRECTION('',(1.,0.,-0.)); +#444110 = SHELL_BASED_SURFACE_MODEL('',(#444111)); +#444111 = OPEN_SHELL('',(#444112)); +#444112 = ADVANCED_FACE('',(#444113),#444182,.T.); +#444113 = FACE_BOUND('',#444114,.F.); +#444114 = EDGE_LOOP('',(#444115,#444126,#444134,#444143,#444151,#444160, + #444168,#444176)); +#444115 = ORIENTED_EDGE('',*,*,#444116,.T.); +#444116 = EDGE_CURVE('',#444117,#444119,#444121,.T.); +#444117 = VERTEX_POINT('',#444118); +#444118 = CARTESIAN_POINT('',(123.194567,-92.277039,1.585)); +#444119 = VERTEX_POINT('',#444120); +#444120 = CARTESIAN_POINT('',(123.31,-92.3,1.585)); +#444121 = CIRCLE('',#444122,6.000007318647E-02); +#444122 = AXIS2_PLACEMENT_3D('',#444123,#444124,#444125); +#444123 = CARTESIAN_POINT('',(123.24999992681,-92.29999982331,1.585)); +#444124 = DIRECTION('',(0.,0.,-1.)); +#444125 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444126 = ORIENTED_EDGE('',*,*,#444127,.T.); +#444127 = EDGE_CURVE('',#444119,#444128,#444130,.T.); +#444128 = VERTEX_POINT('',#444129); +#444129 = CARTESIAN_POINT('',(123.31,-92.9,1.585)); +#444130 = LINE('',#444131,#444132); +#444131 = CARTESIAN_POINT('',(123.31,-92.3,1.585)); +#444132 = VECTOR('',#444133,1.); +#444133 = DIRECTION('',(0.,-1.,0.)); +#444134 = ORIENTED_EDGE('',*,*,#444135,.T.); +#444135 = EDGE_CURVE('',#444128,#444136,#444138,.T.); +#444136 = VERTEX_POINT('',#444137); +#444137 = CARTESIAN_POINT('',(123.25,-92.96,1.585)); +#444138 = CIRCLE('',#444139,5.99993201626E-02); +#444139 = AXIS2_PLACEMENT_3D('',#444140,#444141,#444142); +#444140 = CARTESIAN_POINT('',(123.25000067984,-92.90000067984,1.585)); +#444141 = DIRECTION('',(0.,0.,-1.)); +#444142 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#444143 = ORIENTED_EDGE('',*,*,#444144,.T.); +#444144 = EDGE_CURVE('',#444136,#444145,#444147,.T.); +#444145 = VERTEX_POINT('',#444146); +#444146 = CARTESIAN_POINT('',(122.25,-92.96,1.585)); +#444147 = LINE('',#444148,#444149); +#444148 = CARTESIAN_POINT('',(123.25,-92.96,1.585)); +#444149 = VECTOR('',#444150,1.); +#444150 = DIRECTION('',(-1.,0.,0.)); +#444151 = ORIENTED_EDGE('',*,*,#444152,.T.); +#444152 = EDGE_CURVE('',#444145,#444153,#444155,.T.); +#444153 = VERTEX_POINT('',#444154); +#444154 = CARTESIAN_POINT('',(122.25,-92.84,1.585)); +#444155 = CIRCLE('',#444156,6.000000000042E-02); +#444156 = AXIS2_PLACEMENT_3D('',#444157,#444158,#444159); +#444157 = CARTESIAN_POINT('',(122.24999977441,-92.9,1.585)); +#444158 = DIRECTION('',(0.,0.,-1.)); +#444159 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#444160 = ORIENTED_EDGE('',*,*,#444161,.T.); +#444161 = EDGE_CURVE('',#444153,#444162,#444164,.T.); +#444162 = VERTEX_POINT('',#444163); +#444163 = CARTESIAN_POINT('',(123.19,-92.84,1.585)); +#444164 = LINE('',#444165,#444166); +#444165 = CARTESIAN_POINT('',(122.25,-92.84,1.585)); +#444166 = VECTOR('',#444167,1.); +#444167 = DIRECTION('',(1.,0.,0.)); +#444168 = ORIENTED_EDGE('',*,*,#444169,.T.); +#444169 = EDGE_CURVE('',#444162,#444170,#444172,.T.); +#444170 = VERTEX_POINT('',#444171); +#444171 = CARTESIAN_POINT('',(123.19,-92.3,1.585)); +#444172 = LINE('',#444173,#444174); +#444173 = CARTESIAN_POINT('',(123.19,-92.84,1.585)); +#444174 = VECTOR('',#444175,1.); +#444175 = DIRECTION('',(0.,1.,0.)); +#444176 = ORIENTED_EDGE('',*,*,#444177,.T.); +#444177 = EDGE_CURVE('',#444170,#444117,#444178,.T.); +#444178 = LINE('',#444179,#444180); +#444179 = CARTESIAN_POINT('',(123.19,-92.3,1.585)); +#444180 = VECTOR('',#444181,1.); +#444181 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#444182 = PLANE('',#444183); +#444183 = AXIS2_PLACEMENT_3D('',#444184,#444185,#444186); +#444184 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444185 = DIRECTION('',(0.,0.,1.)); +#444186 = DIRECTION('',(1.,0.,-0.)); +#444187 = SHELL_BASED_SURFACE_MODEL('',(#444188)); +#444188 = OPEN_SHELL('',(#444189)); +#444189 = ADVANCED_FACE('',(#444190),#444259,.T.); +#444190 = FACE_BOUND('',#444191,.F.); +#444191 = EDGE_LOOP('',(#444192,#444203,#444211,#444219,#444228,#444236, + #444245,#444253)); +#444192 = ORIENTED_EDGE('',*,*,#444193,.T.); +#444193 = EDGE_CURVE('',#444194,#444196,#444198,.T.); +#444194 = VERTEX_POINT('',#444195); +#444195 = CARTESIAN_POINT('',(151.644567,-92.277039,1.585)); +#444196 = VERTEX_POINT('',#444197); +#444197 = CARTESIAN_POINT('',(151.76,-92.3,1.585)); +#444198 = CIRCLE('',#444199,6.000007318647E-02); +#444199 = AXIS2_PLACEMENT_3D('',#444200,#444201,#444202); +#444200 = CARTESIAN_POINT('',(151.69999992681,-92.29999982331,1.585)); +#444201 = DIRECTION('',(0.,0.,-1.)); +#444202 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444203 = ORIENTED_EDGE('',*,*,#444204,.T.); +#444204 = EDGE_CURVE('',#444196,#444205,#444207,.T.); +#444205 = VERTEX_POINT('',#444206); +#444206 = CARTESIAN_POINT('',(151.76,-92.84,1.585)); +#444207 = LINE('',#444208,#444209); +#444208 = CARTESIAN_POINT('',(151.76,-92.3,1.585)); +#444209 = VECTOR('',#444210,1.); +#444210 = DIRECTION('',(0.,-1.,0.)); +#444211 = ORIENTED_EDGE('',*,*,#444212,.T.); +#444212 = EDGE_CURVE('',#444205,#444213,#444215,.T.); +#444213 = VERTEX_POINT('',#444214); +#444214 = CARTESIAN_POINT('',(152.7,-92.84,1.585)); +#444215 = LINE('',#444216,#444217); +#444216 = CARTESIAN_POINT('',(151.76,-92.84,1.585)); +#444217 = VECTOR('',#444218,1.); +#444218 = DIRECTION('',(1.,0.,0.)); +#444219 = ORIENTED_EDGE('',*,*,#444220,.T.); +#444220 = EDGE_CURVE('',#444213,#444221,#444223,.T.); +#444221 = VERTEX_POINT('',#444222); +#444222 = CARTESIAN_POINT('',(152.7,-92.96,1.585)); +#444223 = CIRCLE('',#444224,6.000000000043E-02); +#444224 = AXIS2_PLACEMENT_3D('',#444225,#444226,#444227); +#444225 = CARTESIAN_POINT('',(152.70000022558,-92.9,1.585)); +#444226 = DIRECTION('',(0.,0.,-1.)); +#444227 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#444228 = ORIENTED_EDGE('',*,*,#444229,.T.); +#444229 = EDGE_CURVE('',#444221,#444230,#444232,.T.); +#444230 = VERTEX_POINT('',#444231); +#444231 = CARTESIAN_POINT('',(151.7,-92.96,1.585)); +#444232 = LINE('',#444233,#444234); +#444233 = CARTESIAN_POINT('',(152.7,-92.96,1.585)); +#444234 = VECTOR('',#444235,1.); +#444235 = DIRECTION('',(-1.,0.,0.)); +#444236 = ORIENTED_EDGE('',*,*,#444237,.T.); +#444237 = EDGE_CURVE('',#444230,#444238,#444240,.T.); +#444238 = VERTEX_POINT('',#444239); +#444239 = CARTESIAN_POINT('',(151.64,-92.9,1.585)); +#444240 = CIRCLE('',#444241,5.999932016259E-02); +#444241 = AXIS2_PLACEMENT_3D('',#444242,#444243,#444244); +#444242 = CARTESIAN_POINT('',(151.69999932015,-92.90000067984,1.585)); +#444243 = DIRECTION('',(0.,0.,-1.)); +#444244 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#444245 = ORIENTED_EDGE('',*,*,#444246,.T.); +#444246 = EDGE_CURVE('',#444238,#444247,#444249,.T.); +#444247 = VERTEX_POINT('',#444248); +#444248 = CARTESIAN_POINT('',(151.64,-92.3,1.585)); +#444249 = LINE('',#444250,#444251); +#444250 = CARTESIAN_POINT('',(151.64,-92.9,1.585)); +#444251 = VECTOR('',#444252,1.); +#444252 = DIRECTION('',(0.,1.,0.)); +#444253 = ORIENTED_EDGE('',*,*,#444254,.T.); +#444254 = EDGE_CURVE('',#444247,#444194,#444255,.T.); +#444255 = LINE('',#444256,#444257); +#444256 = CARTESIAN_POINT('',(151.64,-92.3,1.585)); +#444257 = VECTOR('',#444258,1.); +#444258 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#444259 = PLANE('',#444260); +#444260 = AXIS2_PLACEMENT_3D('',#444261,#444262,#444263); +#444261 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444262 = DIRECTION('',(0.,0.,1.)); +#444263 = DIRECTION('',(1.,0.,-0.)); +#444264 = SHELL_BASED_SURFACE_MODEL('',(#444265)); +#444265 = OPEN_SHELL('',(#444266)); +#444266 = ADVANCED_FACE('',(#444267),#444311,.T.); +#444267 = FACE_BOUND('',#444268,.F.); +#444268 = EDGE_LOOP('',(#444269,#444280,#444288,#444297,#444305)); +#444269 = ORIENTED_EDGE('',*,*,#444270,.T.); +#444270 = EDGE_CURVE('',#444271,#444273,#444275,.T.); +#444271 = VERTEX_POINT('',#444272); +#444272 = CARTESIAN_POINT('',(120.394567,-89.477039,1.585)); +#444273 = VERTEX_POINT('',#444274); +#444274 = CARTESIAN_POINT('',(120.51,-89.5,1.585)); +#444275 = CIRCLE('',#444276,6.000007318648E-02); +#444276 = AXIS2_PLACEMENT_3D('',#444277,#444278,#444279); +#444277 = CARTESIAN_POINT('',(120.44999992681,-89.49999982331,1.585)); +#444278 = DIRECTION('',(0.,0.,-1.)); +#444279 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444280 = ORIENTED_EDGE('',*,*,#444281,.T.); +#444281 = EDGE_CURVE('',#444273,#444282,#444284,.T.); +#444282 = VERTEX_POINT('',#444283); +#444283 = CARTESIAN_POINT('',(120.51,-91.5,1.585)); +#444284 = LINE('',#444285,#444286); +#444285 = CARTESIAN_POINT('',(120.51,-89.5,1.585)); +#444286 = VECTOR('',#444287,1.); +#444287 = DIRECTION('',(0.,-1.,0.)); +#444288 = ORIENTED_EDGE('',*,*,#444289,.T.); +#444289 = EDGE_CURVE('',#444282,#444290,#444292,.T.); +#444290 = VERTEX_POINT('',#444291); +#444291 = CARTESIAN_POINT('',(120.39,-91.5,1.585)); +#444292 = CIRCLE('',#444293,6.000000000043E-02); +#444293 = AXIS2_PLACEMENT_3D('',#444294,#444295,#444296); +#444294 = CARTESIAN_POINT('',(120.45,-91.50000022558,1.585)); +#444295 = DIRECTION('',(0.,0.,-1.)); +#444296 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#444297 = ORIENTED_EDGE('',*,*,#444298,.T.); +#444298 = EDGE_CURVE('',#444290,#444299,#444301,.T.); +#444299 = VERTEX_POINT('',#444300); +#444300 = CARTESIAN_POINT('',(120.39,-89.5,1.585)); +#444301 = LINE('',#444302,#444303); +#444302 = CARTESIAN_POINT('',(120.39,-91.5,1.585)); +#444303 = VECTOR('',#444304,1.); +#444304 = DIRECTION('',(0.,1.,0.)); +#444305 = ORIENTED_EDGE('',*,*,#444306,.T.); +#444306 = EDGE_CURVE('',#444299,#444271,#444307,.T.); +#444307 = LINE('',#444308,#444309); +#444308 = CARTESIAN_POINT('',(120.39,-89.5,1.585)); +#444309 = VECTOR('',#444310,1.); +#444310 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#444311 = PLANE('',#444312); +#444312 = AXIS2_PLACEMENT_3D('',#444313,#444314,#444315); +#444313 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444314 = DIRECTION('',(0.,0.,1.)); +#444315 = DIRECTION('',(1.,0.,-0.)); +#444316 = SHELL_BASED_SURFACE_MODEL('',(#444317)); +#444317 = OPEN_SHELL('',(#444318)); +#444318 = ADVANCED_FACE('',(#444319),#444363,.T.); +#444319 = FACE_BOUND('',#444320,.F.); +#444320 = EDGE_LOOP('',(#444321,#444332,#444340,#444349,#444357)); +#444321 = ORIENTED_EDGE('',*,*,#444322,.T.); +#444322 = EDGE_CURVE('',#444323,#444325,#444327,.T.); +#444323 = VERTEX_POINT('',#444324); +#444324 = CARTESIAN_POINT('',(154.444567,-89.477039,1.585)); +#444325 = VERTEX_POINT('',#444326); +#444326 = CARTESIAN_POINT('',(154.56,-89.5,1.585)); +#444327 = CIRCLE('',#444328,6.000007318647E-02); +#444328 = AXIS2_PLACEMENT_3D('',#444329,#444330,#444331); +#444329 = CARTESIAN_POINT('',(154.49999992681,-89.49999982331,1.585)); +#444330 = DIRECTION('',(0.,0.,-1.)); +#444331 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#444332 = ORIENTED_EDGE('',*,*,#444333,.T.); +#444333 = EDGE_CURVE('',#444325,#444334,#444336,.T.); +#444334 = VERTEX_POINT('',#444335); +#444335 = CARTESIAN_POINT('',(154.56,-91.5,1.585)); +#444336 = LINE('',#444337,#444338); +#444337 = CARTESIAN_POINT('',(154.56,-89.5,1.585)); +#444338 = VECTOR('',#444339,1.); +#444339 = DIRECTION('',(0.,-1.,0.)); +#444340 = ORIENTED_EDGE('',*,*,#444341,.T.); +#444341 = EDGE_CURVE('',#444334,#444342,#444344,.T.); +#444342 = VERTEX_POINT('',#444343); +#444343 = CARTESIAN_POINT('',(154.44,-91.5,1.585)); +#444344 = CIRCLE('',#444345,6.000000000043E-02); +#444345 = AXIS2_PLACEMENT_3D('',#444346,#444347,#444348); +#444346 = CARTESIAN_POINT('',(154.5,-91.50000022558,1.585)); +#444347 = DIRECTION('',(0.,0.,-1.)); +#444348 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#444349 = ORIENTED_EDGE('',*,*,#444350,.T.); +#444350 = EDGE_CURVE('',#444342,#444351,#444353,.T.); +#444351 = VERTEX_POINT('',#444352); +#444352 = CARTESIAN_POINT('',(154.44,-89.5,1.585)); +#444353 = LINE('',#444354,#444355); +#444354 = CARTESIAN_POINT('',(154.44,-91.5,1.585)); +#444355 = VECTOR('',#444356,1.); +#444356 = DIRECTION('',(0.,1.,0.)); +#444357 = ORIENTED_EDGE('',*,*,#444358,.T.); +#444358 = EDGE_CURVE('',#444351,#444323,#444359,.T.); +#444359 = LINE('',#444360,#444361); +#444360 = CARTESIAN_POINT('',(154.44,-89.5,1.585)); +#444361 = VECTOR('',#444362,1.); +#444362 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#444363 = PLANE('',#444364); +#444364 = AXIS2_PLACEMENT_3D('',#444365,#444366,#444367); +#444365 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444366 = DIRECTION('',(0.,0.,1.)); +#444367 = DIRECTION('',(1.,0.,-0.)); +#444368 = SHELL_BASED_SURFACE_MODEL('',(#444369)); +#444369 = OPEN_SHELL('',(#444370)); +#444370 = ADVANCED_FACE('',(#444371),#444571,.T.); +#444371 = FACE_BOUND('',#444372,.F.); +#444372 = EDGE_LOOP('',(#444373,#444384,#444392,#444401,#444409,#444417, + #444426,#444434,#444442,#444450,#444458,#444466,#444475,#444483, + #444491,#444499,#444508,#444516,#444524,#444532,#444540,#444548, + #444557,#444565)); +#444373 = ORIENTED_EDGE('',*,*,#444374,.T.); +#444374 = EDGE_CURVE('',#444375,#444377,#444379,.T.); +#444375 = VERTEX_POINT('',#444376); +#444376 = CARTESIAN_POINT('',(132.651921,-85.830491,1.585)); +#444377 = VERTEX_POINT('',#444378); +#444378 = CARTESIAN_POINT('',(132.730491,-85.751921,1.585)); +#444379 = CIRCLE('',#444380,0.100002891901); +#444380 = AXIS2_PLACEMENT_3D('',#444381,#444382,#444383); +#444381 = CARTESIAN_POINT('',(132.75000207103,-85.85000207103,1.585)); +#444382 = DIRECTION('',(0.,0.,-1.)); +#444383 = DIRECTION('',(-0.980782347106,0.195105068117,0.)); +#444384 = ORIENTED_EDGE('',*,*,#444385,.T.); +#444385 = EDGE_CURVE('',#444377,#444386,#444388,.T.); +#444386 = VERTEX_POINT('',#444387); +#444387 = CARTESIAN_POINT('',(142.269509,-85.751921,1.585)); +#444388 = LINE('',#444389,#444390); +#444389 = CARTESIAN_POINT('',(132.730491,-85.751921,1.585)); +#444390 = VECTOR('',#444391,1.); +#444391 = DIRECTION('',(1.,0.,0.)); +#444392 = ORIENTED_EDGE('',*,*,#444393,.T.); +#444393 = EDGE_CURVE('',#444386,#444394,#444396,.T.); +#444394 = VERTEX_POINT('',#444395); +#444395 = CARTESIAN_POINT('',(142.348079,-85.830491,1.585)); +#444396 = CIRCLE('',#444397,0.100002891901); +#444397 = AXIS2_PLACEMENT_3D('',#444398,#444399,#444400); +#444398 = CARTESIAN_POINT('',(142.24999792896,-85.85000207103,1.585)); +#444399 = DIRECTION('',(0.,0.,-1.)); +#444400 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#444401 = ORIENTED_EDGE('',*,*,#444402,.T.); +#444402 = EDGE_CURVE('',#444394,#444403,#444405,.T.); +#444403 = VERTEX_POINT('',#444404); +#444404 = CARTESIAN_POINT('',(142.35,-88.575,1.585)); +#444405 = LINE('',#444406,#444407); +#444406 = CARTESIAN_POINT('',(142.348079,-85.830491,1.585)); +#444407 = VECTOR('',#444408,1.); +#444408 = DIRECTION('',(6.999428784578E-04,-0.99999975504,0.)); +#444409 = ORIENTED_EDGE('',*,*,#444410,.T.); +#444410 = EDGE_CURVE('',#444403,#444411,#444413,.T.); +#444411 = VERTEX_POINT('',#444412); +#444412 = CARTESIAN_POINT('',(144.094509,-88.576921,1.585)); +#444413 = LINE('',#444414,#444415); +#444414 = CARTESIAN_POINT('',(142.35,-88.575,1.585)); +#444415 = VECTOR('',#444416,1.); +#444416 = DIRECTION('',(0.999999393713,-1.101168773173E-03,0.)); +#444417 = ORIENTED_EDGE('',*,*,#444418,.T.); +#444418 = EDGE_CURVE('',#444411,#444419,#444421,.T.); +#444419 = VERTEX_POINT('',#444420); +#444420 = CARTESIAN_POINT('',(144.173079,-88.655491,1.585)); +#444421 = CIRCLE('',#444422,0.100002891901); +#444422 = AXIS2_PLACEMENT_3D('',#444423,#444424,#444425); +#444423 = CARTESIAN_POINT('',(144.07499792896,-88.67500207103,1.585)); +#444424 = DIRECTION('',(0.,0.,-1.)); +#444425 = DIRECTION('',(0.195105068116,0.980782347106,0.)); +#444426 = ORIENTED_EDGE('',*,*,#444427,.T.); +#444427 = EDGE_CURVE('',#444419,#444428,#444430,.T.); +#444428 = VERTEX_POINT('',#444429); +#444429 = CARTESIAN_POINT('',(144.174074,-89.559776,1.585)); +#444430 = LINE('',#444431,#444432); +#444431 = CARTESIAN_POINT('',(144.173079,-88.655491,1.585)); +#444432 = VECTOR('',#444433,1.); +#444433 = DIRECTION('',(1.100316158808E-03,-0.999999394652,0.)); +#444434 = ORIENTED_EDGE('',*,*,#444435,.T.); +#444435 = EDGE_CURVE('',#444428,#444436,#444438,.T.); +#444436 = VERTEX_POINT('',#444437); +#444437 = CARTESIAN_POINT('',(144.049971,-89.508371,1.585)); +#444438 = LINE('',#444439,#444440); +#444439 = CARTESIAN_POINT('',(144.174074,-89.559776,1.585)); +#444440 = VECTOR('',#444441,1.); +#444441 = DIRECTION('',(-0.923879916077,0.382682506353,0.)); +#444442 = ORIENTED_EDGE('',*,*,#444443,.T.); +#444443 = EDGE_CURVE('',#444436,#444444,#444446,.T.); +#444444 = VERTEX_POINT('',#444445); +#444445 = CARTESIAN_POINT('',(143.975791,-89.493616,1.585)); +#444446 = LINE('',#444447,#444448); +#444447 = CARTESIAN_POINT('',(144.049971,-89.508371,1.585)); +#444448 = VECTOR('',#444449,1.); +#444449 = DIRECTION('',(-0.980786088464,0.195086259575,0.)); +#444450 = ORIENTED_EDGE('',*,*,#444451,.T.); +#444451 = EDGE_CURVE('',#444444,#444452,#444454,.T.); +#444452 = VERTEX_POINT('',#444453); +#444453 = CARTESIAN_POINT('',(143.975,-88.775,1.585)); +#444454 = LINE('',#444455,#444456); +#444455 = CARTESIAN_POINT('',(143.975791,-89.493616,1.585)); +#444456 = VECTOR('',#444457,1.); +#444457 = DIRECTION('',(-1.10072628609E-03,0.999999394201,0.)); +#444458 = ORIENTED_EDGE('',*,*,#444459,.T.); +#444459 = EDGE_CURVE('',#444452,#444460,#444462,.T.); +#444460 = VERTEX_POINT('',#444461); +#444461 = CARTESIAN_POINT('',(142.230491,-88.773079,1.585)); +#444462 = LINE('',#444463,#444464); +#444463 = CARTESIAN_POINT('',(143.975,-88.775,1.585)); +#444464 = VECTOR('',#444465,1.); +#444465 = DIRECTION('',(-0.999999393713,1.101168773181E-03,0.)); +#444466 = ORIENTED_EDGE('',*,*,#444467,.T.); +#444467 = EDGE_CURVE('',#444460,#444468,#444470,.T.); +#444468 = VERTEX_POINT('',#444469); +#444469 = CARTESIAN_POINT('',(142.151921,-88.694509,1.585)); +#444470 = CIRCLE('',#444471,0.100002891901); +#444471 = AXIS2_PLACEMENT_3D('',#444472,#444473,#444474); +#444472 = CARTESIAN_POINT('',(142.25000207103,-88.67499792896,1.585)); +#444473 = DIRECTION('',(0.,0.,-1.)); +#444474 = DIRECTION('',(-0.195105068116,-0.980782347106,-0.)); +#444475 = ORIENTED_EDGE('',*,*,#444476,.T.); +#444476 = EDGE_CURVE('',#444468,#444477,#444479,.T.); +#444477 = VERTEX_POINT('',#444478); +#444478 = CARTESIAN_POINT('',(142.15,-85.95,1.585)); +#444479 = LINE('',#444480,#444481); +#444480 = CARTESIAN_POINT('',(142.151921,-88.694509,1.585)); +#444481 = VECTOR('',#444482,1.); +#444482 = DIRECTION('',(-6.999428784578E-04,0.99999975504,0.)); +#444483 = ORIENTED_EDGE('',*,*,#444484,.T.); +#444484 = EDGE_CURVE('',#444477,#444485,#444487,.T.); +#444485 = VERTEX_POINT('',#444486); +#444486 = CARTESIAN_POINT('',(132.85,-85.95,1.585)); +#444487 = LINE('',#444488,#444489); +#444488 = CARTESIAN_POINT('',(142.15,-85.95,1.585)); +#444489 = VECTOR('',#444490,1.); +#444490 = DIRECTION('',(-1.,0.,0.)); +#444491 = ORIENTED_EDGE('',*,*,#444492,.T.); +#444492 = EDGE_CURVE('',#444485,#444493,#444495,.T.); +#444493 = VERTEX_POINT('',#444494); +#444494 = CARTESIAN_POINT('',(132.848079,-88.694509,1.585)); +#444495 = LINE('',#444496,#444497); +#444496 = CARTESIAN_POINT('',(132.85,-85.95,1.585)); +#444497 = VECTOR('',#444498,1.); +#444498 = DIRECTION('',(-6.999428784578E-04,-0.99999975504,0.)); +#444499 = ORIENTED_EDGE('',*,*,#444500,.T.); +#444500 = EDGE_CURVE('',#444493,#444501,#444503,.T.); +#444501 = VERTEX_POINT('',#444502); +#444502 = CARTESIAN_POINT('',(132.769509,-88.773079,1.585)); +#444503 = CIRCLE('',#444504,0.100002891901); +#444504 = AXIS2_PLACEMENT_3D('',#444505,#444506,#444507); +#444505 = CARTESIAN_POINT('',(132.74999792896,-88.67499792896,1.585)); +#444506 = DIRECTION('',(0.,0.,-1.)); +#444507 = DIRECTION('',(0.980782347106,-0.195105068116,0.)); +#444508 = ORIENTED_EDGE('',*,*,#444509,.T.); +#444509 = EDGE_CURVE('',#444501,#444510,#444512,.T.); +#444510 = VERTEX_POINT('',#444511); +#444511 = CARTESIAN_POINT('',(131.025,-88.775,1.585)); +#444512 = LINE('',#444513,#444514); +#444513 = CARTESIAN_POINT('',(132.769509,-88.773079,1.585)); +#444514 = VECTOR('',#444515,1.); +#444515 = DIRECTION('',(-0.999999393713,-1.101168773181E-03,0.)); +#444516 = ORIENTED_EDGE('',*,*,#444517,.T.); +#444517 = EDGE_CURVE('',#444510,#444518,#444520,.T.); +#444518 = VERTEX_POINT('',#444519); +#444519 = CARTESIAN_POINT('',(131.025,-89.493458,1.585)); +#444520 = LINE('',#444521,#444522); +#444521 = CARTESIAN_POINT('',(131.025,-88.775,1.585)); +#444522 = VECTOR('',#444523,1.); +#444523 = DIRECTION('',(0.,-1.,0.)); +#444524 = ORIENTED_EDGE('',*,*,#444525,.T.); +#444525 = EDGE_CURVE('',#444518,#444526,#444528,.T.); +#444526 = VERTEX_POINT('',#444527); +#444527 = CARTESIAN_POINT('',(130.950029,-89.508371,1.585)); +#444528 = LINE('',#444529,#444530); +#444529 = CARTESIAN_POINT('',(131.025,-89.493458,1.585)); +#444530 = VECTOR('',#444531,1.); +#444531 = DIRECTION('',(-0.980784427051,-0.195094612058,0.)); +#444532 = ORIENTED_EDGE('',*,*,#444533,.T.); +#444533 = EDGE_CURVE('',#444526,#444534,#444536,.T.); +#444534 = VERTEX_POINT('',#444535); +#444535 = CARTESIAN_POINT('',(130.826921,-89.559364,1.585)); +#444536 = LINE('',#444537,#444538); +#444537 = CARTESIAN_POINT('',(130.950029,-89.508371,1.585)); +#444538 = VECTOR('',#444539,1.); +#444539 = DIRECTION('',(-0.923879541099,-0.382683411633,0.)); +#444540 = ORIENTED_EDGE('',*,*,#444541,.T.); +#444541 = EDGE_CURVE('',#444534,#444542,#444544,.T.); +#444542 = VERTEX_POINT('',#444543); +#444543 = CARTESIAN_POINT('',(130.826921,-88.655491,1.585)); +#444544 = LINE('',#444545,#444546); +#444545 = CARTESIAN_POINT('',(130.826921,-89.559364,1.585)); +#444546 = VECTOR('',#444547,1.); +#444547 = DIRECTION('',(0.,1.,0.)); +#444548 = ORIENTED_EDGE('',*,*,#444549,.T.); +#444549 = EDGE_CURVE('',#444542,#444550,#444552,.T.); +#444550 = VERTEX_POINT('',#444551); +#444551 = CARTESIAN_POINT('',(130.905491,-88.576921,1.585)); +#444552 = CIRCLE('',#444553,0.100002891901); +#444553 = AXIS2_PLACEMENT_3D('',#444554,#444555,#444556); +#444554 = CARTESIAN_POINT('',(130.92500207103,-88.67500207103,1.585)); +#444555 = DIRECTION('',(0.,0.,-1.)); +#444556 = DIRECTION('',(-0.980782347106,0.195105068116,0.)); +#444557 = ORIENTED_EDGE('',*,*,#444558,.T.); +#444558 = EDGE_CURVE('',#444550,#444559,#444561,.T.); +#444559 = VERTEX_POINT('',#444560); +#444560 = CARTESIAN_POINT('',(132.65,-88.575,1.585)); +#444561 = LINE('',#444562,#444563); +#444562 = CARTESIAN_POINT('',(130.905491,-88.576921,1.585)); +#444563 = VECTOR('',#444564,1.); +#444564 = DIRECTION('',(0.999999393713,1.101168773173E-03,0.)); +#444565 = ORIENTED_EDGE('',*,*,#444566,.T.); +#444566 = EDGE_CURVE('',#444559,#444375,#444567,.T.); +#444567 = LINE('',#444568,#444569); +#444568 = CARTESIAN_POINT('',(132.65,-88.575,1.585)); +#444569 = VECTOR('',#444570,1.); +#444570 = DIRECTION('',(6.999428784578E-04,0.99999975504,0.)); +#444571 = PLANE('',#444572); +#444572 = AXIS2_PLACEMENT_3D('',#444573,#444574,#444575); +#444573 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444574 = DIRECTION('',(0.,0.,1.)); +#444575 = DIRECTION('',(1.,0.,-0.)); +#444576 = SHELL_BASED_SURFACE_MODEL('',(#444577)); +#444577 = OPEN_SHELL('',(#444578)); +#444578 = ADVANCED_FACE('',(#444579),#444615,.T.); +#444579 = FACE_BOUND('',#444580,.F.); +#444580 = EDGE_LOOP('',(#444581,#444592,#444600,#444609)); +#444581 = ORIENTED_EDGE('',*,*,#444582,.T.); +#444582 = EDGE_CURVE('',#444583,#444585,#444587,.T.); +#444583 = VERTEX_POINT('',#444584); +#444584 = CARTESIAN_POINT('',(125.836359,-89.54,1.585)); +#444585 = VERTEX_POINT('',#444586); +#444586 = CARTESIAN_POINT('',(125.836359,-89.42,1.585)); +#444587 = CIRCLE('',#444588,6.000000000043E-02); +#444588 = AXIS2_PLACEMENT_3D('',#444589,#444590,#444591); +#444589 = CARTESIAN_POINT('',(125.83635877441,-89.48,1.585)); +#444590 = DIRECTION('',(0.,0.,-1.)); +#444591 = DIRECTION('',(3.759794253683E-06,-0.999999999993,0.)); +#444592 = ORIENTED_EDGE('',*,*,#444593,.T.); +#444593 = EDGE_CURVE('',#444585,#444594,#444596,.T.); +#444594 = VERTEX_POINT('',#444595); +#444595 = CARTESIAN_POINT('',(126.143641,-89.42,1.585)); +#444596 = LINE('',#444597,#444598); +#444597 = CARTESIAN_POINT('',(125.836359,-89.42,1.585)); +#444598 = VECTOR('',#444599,1.); +#444599 = DIRECTION('',(1.,0.,0.)); +#444600 = ORIENTED_EDGE('',*,*,#444601,.T.); +#444601 = EDGE_CURVE('',#444594,#444602,#444604,.T.); +#444602 = VERTEX_POINT('',#444603); +#444603 = CARTESIAN_POINT('',(126.143641,-89.54,1.585)); +#444604 = CIRCLE('',#444605,6.000000000043E-02); +#444605 = AXIS2_PLACEMENT_3D('',#444606,#444607,#444608); +#444606 = CARTESIAN_POINT('',(126.14364122558,-89.48,1.585)); +#444607 = DIRECTION('',(0.,0.,-1.)); +#444608 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#444609 = ORIENTED_EDGE('',*,*,#444610,.T.); +#444610 = EDGE_CURVE('',#444602,#444583,#444611,.T.); +#444611 = LINE('',#444612,#444613); +#444612 = CARTESIAN_POINT('',(126.143641,-89.54,1.585)); +#444613 = VECTOR('',#444614,1.); +#444614 = DIRECTION('',(-1.,0.,0.)); +#444615 = PLANE('',#444616); +#444616 = AXIS2_PLACEMENT_3D('',#444617,#444618,#444619); +#444617 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444618 = DIRECTION('',(0.,0.,1.)); +#444619 = DIRECTION('',(1.,0.,-0.)); +#444620 = SHELL_BASED_SURFACE_MODEL('',(#444621)); +#444621 = OPEN_SHELL('',(#444622)); +#444622 = ADVANCED_FACE('',(#444623),#444659,.T.); +#444623 = FACE_BOUND('',#444624,.F.); +#444624 = EDGE_LOOP('',(#444625,#444636,#444644,#444653)); +#444625 = ORIENTED_EDGE('',*,*,#444626,.T.); +#444626 = EDGE_CURVE('',#444627,#444629,#444631,.T.); +#444627 = VERTEX_POINT('',#444628); +#444628 = CARTESIAN_POINT('',(125.836359,-88.78,1.585)); +#444629 = VERTEX_POINT('',#444630); +#444630 = CARTESIAN_POINT('',(125.836359,-88.66,1.585)); +#444631 = CIRCLE('',#444632,6.000000000042E-02); +#444632 = AXIS2_PLACEMENT_3D('',#444633,#444634,#444635); +#444633 = CARTESIAN_POINT('',(125.83635877441,-88.72,1.585)); +#444634 = DIRECTION('',(0.,0.,-1.)); +#444635 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#444636 = ORIENTED_EDGE('',*,*,#444637,.T.); +#444637 = EDGE_CURVE('',#444629,#444638,#444640,.T.); +#444638 = VERTEX_POINT('',#444639); +#444639 = CARTESIAN_POINT('',(126.143641,-88.66,1.585)); +#444640 = LINE('',#444641,#444642); +#444641 = CARTESIAN_POINT('',(125.836359,-88.66,1.585)); +#444642 = VECTOR('',#444643,1.); +#444643 = DIRECTION('',(1.,0.,0.)); +#444644 = ORIENTED_EDGE('',*,*,#444645,.T.); +#444645 = EDGE_CURVE('',#444638,#444646,#444648,.T.); +#444646 = VERTEX_POINT('',#444647); +#444647 = CARTESIAN_POINT('',(126.143641,-88.78,1.585)); +#444648 = CIRCLE('',#444649,6.000000000042E-02); +#444649 = AXIS2_PLACEMENT_3D('',#444650,#444651,#444652); +#444650 = CARTESIAN_POINT('',(126.14364122558,-88.72,1.585)); +#444651 = DIRECTION('',(0.,0.,-1.)); +#444652 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#444653 = ORIENTED_EDGE('',*,*,#444654,.T.); +#444654 = EDGE_CURVE('',#444646,#444627,#444655,.T.); +#444655 = LINE('',#444656,#444657); +#444656 = CARTESIAN_POINT('',(126.143641,-88.78,1.585)); +#444657 = VECTOR('',#444658,1.); +#444658 = DIRECTION('',(-1.,0.,0.)); +#444659 = PLANE('',#444660); +#444660 = AXIS2_PLACEMENT_3D('',#444661,#444662,#444663); +#444661 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444662 = DIRECTION('',(0.,0.,1.)); +#444663 = DIRECTION('',(1.,0.,-0.)); +#444664 = SHELL_BASED_SURFACE_MODEL('',(#444665)); +#444665 = OPEN_SHELL('',(#444666)); +#444666 = ADVANCED_FACE('',(#444667),#444728,.T.); +#444667 = FACE_BOUND('',#444668,.F.); +#444668 = EDGE_LOOP('',(#444669,#444680,#444688,#444697,#444705,#444714, + #444722)); +#444669 = ORIENTED_EDGE('',*,*,#444670,.T.); +#444670 = EDGE_CURVE('',#444671,#444673,#444675,.T.); +#444671 = VERTEX_POINT('',#444672); +#444672 = CARTESIAN_POINT('',(122.25,-88.16,1.585)); +#444673 = VERTEX_POINT('',#444674); +#444674 = CARTESIAN_POINT('',(122.25,-88.04,1.585)); +#444675 = CIRCLE('',#444676,6.000000000042E-02); +#444676 = AXIS2_PLACEMENT_3D('',#444677,#444678,#444679); +#444677 = CARTESIAN_POINT('',(122.24999977441,-88.1,1.585)); +#444678 = DIRECTION('',(0.,0.,-1.)); +#444679 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#444680 = ORIENTED_EDGE('',*,*,#444681,.T.); +#444681 = EDGE_CURVE('',#444673,#444682,#444684,.T.); +#444682 = VERTEX_POINT('',#444683); +#444683 = CARTESIAN_POINT('',(123.25,-88.04,1.585)); +#444684 = LINE('',#444685,#444686); +#444685 = CARTESIAN_POINT('',(122.25,-88.04,1.585)); +#444686 = VECTOR('',#444687,1.); +#444687 = DIRECTION('',(1.,0.,0.)); +#444688 = ORIENTED_EDGE('',*,*,#444689,.T.); +#444689 = EDGE_CURVE('',#444682,#444690,#444692,.T.); +#444690 = VERTEX_POINT('',#444691); +#444691 = CARTESIAN_POINT('',(123.31,-88.1,1.585)); +#444692 = CIRCLE('',#444693,5.999932016259E-02); +#444693 = AXIS2_PLACEMENT_3D('',#444694,#444695,#444696); +#444694 = CARTESIAN_POINT('',(123.25000067984,-88.09999932015,1.585)); +#444695 = DIRECTION('',(0.,0.,-1.)); +#444696 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#444697 = ORIENTED_EDGE('',*,*,#444698,.T.); +#444698 = EDGE_CURVE('',#444690,#444699,#444701,.T.); +#444699 = VERTEX_POINT('',#444700); +#444700 = CARTESIAN_POINT('',(123.31,-88.7,1.585)); +#444701 = LINE('',#444702,#444703); +#444702 = CARTESIAN_POINT('',(123.31,-88.1,1.585)); +#444703 = VECTOR('',#444704,1.); +#444704 = DIRECTION('',(0.,-1.,0.)); +#444705 = ORIENTED_EDGE('',*,*,#444706,.T.); +#444706 = EDGE_CURVE('',#444699,#444707,#444709,.T.); +#444707 = VERTEX_POINT('',#444708); +#444708 = CARTESIAN_POINT('',(123.19,-88.7,1.585)); +#444709 = CIRCLE('',#444710,6.000000000042E-02); +#444710 = AXIS2_PLACEMENT_3D('',#444711,#444712,#444713); +#444711 = CARTESIAN_POINT('',(123.25,-88.70000022558,1.585)); +#444712 = DIRECTION('',(0.,0.,-1.)); +#444713 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#444714 = ORIENTED_EDGE('',*,*,#444715,.T.); +#444715 = EDGE_CURVE('',#444707,#444716,#444718,.T.); +#444716 = VERTEX_POINT('',#444717); +#444717 = CARTESIAN_POINT('',(123.19,-88.16,1.585)); +#444718 = LINE('',#444719,#444720); +#444719 = CARTESIAN_POINT('',(123.19,-88.7,1.585)); +#444720 = VECTOR('',#444721,1.); +#444721 = DIRECTION('',(0.,1.,0.)); +#444722 = ORIENTED_EDGE('',*,*,#444723,.T.); +#444723 = EDGE_CURVE('',#444716,#444671,#444724,.T.); +#444724 = LINE('',#444725,#444726); +#444725 = CARTESIAN_POINT('',(123.19,-88.16,1.585)); +#444726 = VECTOR('',#444727,1.); +#444727 = DIRECTION('',(-1.,0.,0.)); +#444728 = PLANE('',#444729); +#444729 = AXIS2_PLACEMENT_3D('',#444730,#444731,#444732); +#444730 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444731 = DIRECTION('',(0.,0.,1.)); +#444732 = DIRECTION('',(1.,0.,-0.)); +#444733 = SHELL_BASED_SURFACE_MODEL('',(#444734)); +#444734 = OPEN_SHELL('',(#444735)); +#444735 = ADVANCED_FACE('',(#444736),#444797,.T.); +#444736 = FACE_BOUND('',#444737,.F.); +#444737 = EDGE_LOOP('',(#444738,#444749,#444757,#444766,#444774,#444782, + #444791)); +#444738 = ORIENTED_EDGE('',*,*,#444739,.T.); +#444739 = EDGE_CURVE('',#444740,#444742,#444744,.T.); +#444740 = VERTEX_POINT('',#444741); +#444741 = CARTESIAN_POINT('',(151.64,-88.1,1.585)); +#444742 = VERTEX_POINT('',#444743); +#444743 = CARTESIAN_POINT('',(151.7,-88.04,1.585)); +#444744 = CIRCLE('',#444745,5.999932016261E-02); +#444745 = AXIS2_PLACEMENT_3D('',#444746,#444747,#444748); +#444746 = CARTESIAN_POINT('',(151.69999932015,-88.09999932015,1.585)); +#444747 = DIRECTION('',(0.,0.,-1.)); +#444748 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#444749 = ORIENTED_EDGE('',*,*,#444750,.T.); +#444750 = EDGE_CURVE('',#444742,#444751,#444753,.T.); +#444751 = VERTEX_POINT('',#444752); +#444752 = CARTESIAN_POINT('',(152.7,-88.04,1.585)); +#444753 = LINE('',#444754,#444755); +#444754 = CARTESIAN_POINT('',(151.7,-88.04,1.585)); +#444755 = VECTOR('',#444756,1.); +#444756 = DIRECTION('',(1.,0.,0.)); +#444757 = ORIENTED_EDGE('',*,*,#444758,.T.); +#444758 = EDGE_CURVE('',#444751,#444759,#444761,.T.); +#444759 = VERTEX_POINT('',#444760); +#444760 = CARTESIAN_POINT('',(152.7,-88.16,1.585)); +#444761 = CIRCLE('',#444762,6.000000000042E-02); +#444762 = AXIS2_PLACEMENT_3D('',#444763,#444764,#444765); +#444763 = CARTESIAN_POINT('',(152.70000022558,-88.1,1.585)); +#444764 = DIRECTION('',(0.,0.,-1.)); +#444765 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#444766 = ORIENTED_EDGE('',*,*,#444767,.T.); +#444767 = EDGE_CURVE('',#444759,#444768,#444770,.T.); +#444768 = VERTEX_POINT('',#444769); +#444769 = CARTESIAN_POINT('',(151.76,-88.16,1.585)); +#444770 = LINE('',#444771,#444772); +#444771 = CARTESIAN_POINT('',(152.7,-88.16,1.585)); +#444772 = VECTOR('',#444773,1.); +#444773 = DIRECTION('',(-1.,0.,0.)); +#444774 = ORIENTED_EDGE('',*,*,#444775,.T.); +#444775 = EDGE_CURVE('',#444768,#444776,#444778,.T.); +#444776 = VERTEX_POINT('',#444777); +#444777 = CARTESIAN_POINT('',(151.76,-88.7,1.585)); +#444778 = LINE('',#444779,#444780); +#444779 = CARTESIAN_POINT('',(151.76,-88.16,1.585)); +#444780 = VECTOR('',#444781,1.); +#444781 = DIRECTION('',(0.,-1.,0.)); +#444782 = ORIENTED_EDGE('',*,*,#444783,.T.); +#444783 = EDGE_CURVE('',#444776,#444784,#444786,.T.); +#444784 = VERTEX_POINT('',#444785); +#444785 = CARTESIAN_POINT('',(151.64,-88.7,1.585)); +#444786 = CIRCLE('',#444787,6.000000000043E-02); +#444787 = AXIS2_PLACEMENT_3D('',#444788,#444789,#444790); +#444788 = CARTESIAN_POINT('',(151.7,-88.70000022558,1.585)); +#444789 = DIRECTION('',(0.,0.,-1.)); +#444790 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#444791 = ORIENTED_EDGE('',*,*,#444792,.T.); +#444792 = EDGE_CURVE('',#444784,#444740,#444793,.T.); +#444793 = LINE('',#444794,#444795); +#444794 = CARTESIAN_POINT('',(151.64,-88.7,1.585)); +#444795 = VECTOR('',#444796,1.); +#444796 = DIRECTION('',(0.,1.,0.)); +#444797 = PLANE('',#444798); +#444798 = AXIS2_PLACEMENT_3D('',#444799,#444800,#444801); +#444799 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444800 = DIRECTION('',(0.,0.,1.)); +#444801 = DIRECTION('',(1.,0.,-0.)); +#444802 = SHELL_BASED_SURFACE_MODEL('',(#444803)); +#444803 = OPEN_SHELL('',(#444804)); +#444804 = ADVANCED_FACE('',(#444805),#444841,.T.); +#444805 = FACE_BOUND('',#444806,.F.); +#444806 = EDGE_LOOP('',(#444807,#444818,#444826,#444835)); +#444807 = ORIENTED_EDGE('',*,*,#444808,.T.); +#444808 = EDGE_CURVE('',#444809,#444811,#444813,.T.); +#444809 = VERTEX_POINT('',#444810); +#444810 = CARTESIAN_POINT('',(125.836359,-88.34,1.585)); +#444811 = VERTEX_POINT('',#444812); +#444812 = CARTESIAN_POINT('',(125.836359,-88.22,1.585)); +#444813 = CIRCLE('',#444814,6.000000000042E-02); +#444814 = AXIS2_PLACEMENT_3D('',#444815,#444816,#444817); +#444815 = CARTESIAN_POINT('',(125.83635877441,-88.28,1.585)); +#444816 = DIRECTION('',(0.,0.,-1.)); +#444817 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#444818 = ORIENTED_EDGE('',*,*,#444819,.T.); +#444819 = EDGE_CURVE('',#444811,#444820,#444822,.T.); +#444820 = VERTEX_POINT('',#444821); +#444821 = CARTESIAN_POINT('',(126.143641,-88.22,1.585)); +#444822 = LINE('',#444823,#444824); +#444823 = CARTESIAN_POINT('',(125.836359,-88.22,1.585)); +#444824 = VECTOR('',#444825,1.); +#444825 = DIRECTION('',(1.,0.,0.)); +#444826 = ORIENTED_EDGE('',*,*,#444827,.T.); +#444827 = EDGE_CURVE('',#444820,#444828,#444830,.T.); +#444828 = VERTEX_POINT('',#444829); +#444829 = CARTESIAN_POINT('',(126.143641,-88.34,1.585)); +#444830 = CIRCLE('',#444831,6.000000000042E-02); +#444831 = AXIS2_PLACEMENT_3D('',#444832,#444833,#444834); +#444832 = CARTESIAN_POINT('',(126.14364122558,-88.28,1.585)); +#444833 = DIRECTION('',(0.,0.,-1.)); +#444834 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#444835 = ORIENTED_EDGE('',*,*,#444836,.T.); +#444836 = EDGE_CURVE('',#444828,#444809,#444837,.T.); +#444837 = LINE('',#444838,#444839); +#444838 = CARTESIAN_POINT('',(126.143641,-88.34,1.585)); +#444839 = VECTOR('',#444840,1.); +#444840 = DIRECTION('',(-1.,0.,0.)); +#444841 = PLANE('',#444842); +#444842 = AXIS2_PLACEMENT_3D('',#444843,#444844,#444845); +#444843 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444844 = DIRECTION('',(0.,0.,1.)); +#444845 = DIRECTION('',(1.,0.,-0.)); +#444846 = SHELL_BASED_SURFACE_MODEL('',(#444847)); +#444847 = OPEN_SHELL('',(#444848)); +#444848 = ADVANCED_FACE('',(#444849),#444885,.T.); +#444849 = FACE_BOUND('',#444850,.F.); +#444850 = EDGE_LOOP('',(#444851,#444862,#444870,#444879)); +#444851 = ORIENTED_EDGE('',*,*,#444852,.T.); +#444852 = EDGE_CURVE('',#444853,#444855,#444857,.T.); +#444853 = VERTEX_POINT('',#444854); +#444854 = CARTESIAN_POINT('',(125.836359,-87.58,1.585)); +#444855 = VERTEX_POINT('',#444856); +#444856 = CARTESIAN_POINT('',(125.836359,-87.46,1.585)); +#444857 = CIRCLE('',#444858,6.000000000042E-02); +#444858 = AXIS2_PLACEMENT_3D('',#444859,#444860,#444861); +#444859 = CARTESIAN_POINT('',(125.83635877441,-87.52,1.585)); +#444860 = DIRECTION('',(0.,0.,-1.)); +#444861 = DIRECTION('',(3.759794490531E-06,-0.999999999993,0.)); +#444862 = ORIENTED_EDGE('',*,*,#444863,.T.); +#444863 = EDGE_CURVE('',#444855,#444864,#444866,.T.); +#444864 = VERTEX_POINT('',#444865); +#444865 = CARTESIAN_POINT('',(126.143641,-87.46,1.585)); +#444866 = LINE('',#444867,#444868); +#444867 = CARTESIAN_POINT('',(125.836359,-87.46,1.585)); +#444868 = VECTOR('',#444869,1.); +#444869 = DIRECTION('',(1.,0.,0.)); +#444870 = ORIENTED_EDGE('',*,*,#444871,.T.); +#444871 = EDGE_CURVE('',#444864,#444872,#444874,.T.); +#444872 = VERTEX_POINT('',#444873); +#444873 = CARTESIAN_POINT('',(126.143641,-87.58,1.585)); +#444874 = CIRCLE('',#444875,6.000000000043E-02); +#444875 = AXIS2_PLACEMENT_3D('',#444876,#444877,#444878); +#444876 = CARTESIAN_POINT('',(126.14364122558,-87.52,1.585)); +#444877 = DIRECTION('',(0.,0.,-1.)); +#444878 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#444879 = ORIENTED_EDGE('',*,*,#444880,.T.); +#444880 = EDGE_CURVE('',#444872,#444853,#444881,.T.); +#444881 = LINE('',#444882,#444883); +#444882 = CARTESIAN_POINT('',(126.143641,-87.58,1.585)); +#444883 = VECTOR('',#444884,1.); +#444884 = DIRECTION('',(-1.,0.,0.)); +#444885 = PLANE('',#444886); +#444886 = AXIS2_PLACEMENT_3D('',#444887,#444888,#444889); +#444887 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444888 = DIRECTION('',(0.,0.,1.)); +#444889 = DIRECTION('',(1.,0.,-0.)); +#444890 = SHELL_BASED_SURFACE_MODEL('',(#444891)); +#444891 = OPEN_SHELL('',(#444892)); +#444892 = ADVANCED_FACE('',(#444893),#444929,.T.); +#444893 = FACE_BOUND('',#444894,.F.); +#444894 = EDGE_LOOP('',(#444895,#444906,#444914,#444923)); +#444895 = ORIENTED_EDGE('',*,*,#444896,.T.); +#444896 = EDGE_CURVE('',#444897,#444899,#444901,.T.); +#444897 = VERTEX_POINT('',#444898); +#444898 = CARTESIAN_POINT('',(124.588748,-87.095,1.585)); +#444899 = VERTEX_POINT('',#444900); +#444900 = CARTESIAN_POINT('',(124.588748,-86.975,1.585)); +#444901 = CIRCLE('',#444902,6.000000000043E-02); +#444902 = AXIS2_PLACEMENT_3D('',#444903,#444904,#444905); +#444903 = CARTESIAN_POINT('',(124.58874777441,-87.035,1.585)); +#444904 = DIRECTION('',(0.,0.,-1.)); +#444905 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#444906 = ORIENTED_EDGE('',*,*,#444907,.T.); +#444907 = EDGE_CURVE('',#444899,#444908,#444910,.T.); +#444908 = VERTEX_POINT('',#444909); +#444909 = CARTESIAN_POINT('',(125.111252,-86.975,1.585)); +#444910 = LINE('',#444911,#444912); +#444911 = CARTESIAN_POINT('',(124.588748,-86.975,1.585)); +#444912 = VECTOR('',#444913,1.); +#444913 = DIRECTION('',(1.,0.,0.)); +#444914 = ORIENTED_EDGE('',*,*,#444915,.T.); +#444915 = EDGE_CURVE('',#444908,#444916,#444918,.T.); +#444916 = VERTEX_POINT('',#444917); +#444917 = CARTESIAN_POINT('',(125.111252,-87.095,1.585)); +#444918 = CIRCLE('',#444919,6.000000000042E-02); +#444919 = AXIS2_PLACEMENT_3D('',#444920,#444921,#444922); +#444920 = CARTESIAN_POINT('',(125.11125222558,-87.035,1.585)); +#444921 = DIRECTION('',(0.,0.,-1.)); +#444922 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#444923 = ORIENTED_EDGE('',*,*,#444924,.T.); +#444924 = EDGE_CURVE('',#444916,#444897,#444925,.T.); +#444925 = LINE('',#444926,#444927); +#444926 = CARTESIAN_POINT('',(125.111252,-87.095,1.585)); +#444927 = VECTOR('',#444928,1.); +#444928 = DIRECTION('',(-1.,0.,0.)); +#444929 = PLANE('',#444930); +#444930 = AXIS2_PLACEMENT_3D('',#444931,#444932,#444933); +#444931 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444932 = DIRECTION('',(0.,0.,1.)); +#444933 = DIRECTION('',(1.,0.,-0.)); +#444934 = SHELL_BASED_SURFACE_MODEL('',(#444935)); +#444935 = OPEN_SHELL('',(#444936)); +#444936 = ADVANCED_FACE('',(#444937),#444973,.T.); +#444937 = FACE_BOUND('',#444938,.F.); +#444938 = EDGE_LOOP('',(#444939,#444950,#444958,#444967)); +#444939 = ORIENTED_EDGE('',*,*,#444940,.T.); +#444940 = EDGE_CURVE('',#444941,#444943,#444945,.T.); +#444941 = VERTEX_POINT('',#444942); +#444942 = CARTESIAN_POINT('',(124.588748,-85.625,1.585)); +#444943 = VERTEX_POINT('',#444944); +#444944 = CARTESIAN_POINT('',(124.588748,-85.505,1.585)); +#444945 = CIRCLE('',#444946,6.000000000043E-02); +#444946 = AXIS2_PLACEMENT_3D('',#444947,#444948,#444949); +#444947 = CARTESIAN_POINT('',(124.58874777441,-85.565,1.585)); +#444948 = DIRECTION('',(0.,0.,-1.)); +#444949 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#444950 = ORIENTED_EDGE('',*,*,#444951,.T.); +#444951 = EDGE_CURVE('',#444943,#444952,#444954,.T.); +#444952 = VERTEX_POINT('',#444953); +#444953 = CARTESIAN_POINT('',(125.111252,-85.505,1.585)); +#444954 = LINE('',#444955,#444956); +#444955 = CARTESIAN_POINT('',(124.588748,-85.505,1.585)); +#444956 = VECTOR('',#444957,1.); +#444957 = DIRECTION('',(1.,0.,0.)); +#444958 = ORIENTED_EDGE('',*,*,#444959,.T.); +#444959 = EDGE_CURVE('',#444952,#444960,#444962,.T.); +#444960 = VERTEX_POINT('',#444961); +#444961 = CARTESIAN_POINT('',(125.111252,-85.625,1.585)); +#444962 = CIRCLE('',#444963,6.000000000042E-02); +#444963 = AXIS2_PLACEMENT_3D('',#444964,#444965,#444966); +#444964 = CARTESIAN_POINT('',(125.11125222558,-85.565,1.585)); +#444965 = DIRECTION('',(0.,0.,-1.)); +#444966 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#444967 = ORIENTED_EDGE('',*,*,#444968,.T.); +#444968 = EDGE_CURVE('',#444960,#444941,#444969,.T.); +#444969 = LINE('',#444970,#444971); +#444970 = CARTESIAN_POINT('',(125.111252,-85.625,1.585)); +#444971 = VECTOR('',#444972,1.); +#444972 = DIRECTION('',(-1.,0.,0.)); +#444973 = PLANE('',#444974); +#444974 = AXIS2_PLACEMENT_3D('',#444975,#444976,#444977); +#444975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#444976 = DIRECTION('',(0.,0.,1.)); +#444977 = DIRECTION('',(1.,0.,-0.)); +#444978 = SHELL_BASED_SURFACE_MODEL('',(#444979)); +#444979 = OPEN_SHELL('',(#444980)); +#444980 = ADVANCED_FACE('',(#444981),#445017,.T.); +#444981 = FACE_BOUND('',#444982,.F.); +#444982 = EDGE_LOOP('',(#444983,#444994,#445002,#445011)); +#444983 = ORIENTED_EDGE('',*,*,#444984,.T.); +#444984 = EDGE_CURVE('',#444985,#444987,#444989,.T.); +#444985 = VERTEX_POINT('',#444986); +#444986 = CARTESIAN_POINT('',(125.172164,-85.045,1.585)); +#444987 = VERTEX_POINT('',#444988); +#444988 = CARTESIAN_POINT('',(125.172164,-84.925,1.585)); +#444989 = CIRCLE('',#444990,6.000000000043E-02); +#444990 = AXIS2_PLACEMENT_3D('',#444991,#444992,#444993); +#444991 = CARTESIAN_POINT('',(125.17216377441,-84.985,1.585)); +#444992 = DIRECTION('',(0.,0.,-1.)); +#444993 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#444994 = ORIENTED_EDGE('',*,*,#444995,.T.); +#444995 = EDGE_CURVE('',#444987,#444996,#444998,.T.); +#444996 = VERTEX_POINT('',#444997); +#444997 = CARTESIAN_POINT('',(125.387836,-84.925,1.585)); +#444998 = LINE('',#444999,#445000); +#444999 = CARTESIAN_POINT('',(125.172164,-84.925,1.585)); +#445000 = VECTOR('',#445001,1.); +#445001 = DIRECTION('',(1.,0.,0.)); +#445002 = ORIENTED_EDGE('',*,*,#445003,.T.); +#445003 = EDGE_CURVE('',#444996,#445004,#445006,.T.); +#445004 = VERTEX_POINT('',#445005); +#445005 = CARTESIAN_POINT('',(125.387836,-85.045,1.585)); +#445006 = CIRCLE('',#445007,6.000000000043E-02); +#445007 = AXIS2_PLACEMENT_3D('',#445008,#445009,#445010); +#445008 = CARTESIAN_POINT('',(125.38783622558,-84.985,1.585)); +#445009 = DIRECTION('',(0.,0.,-1.)); +#445010 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#445011 = ORIENTED_EDGE('',*,*,#445012,.T.); +#445012 = EDGE_CURVE('',#445004,#444985,#445013,.T.); +#445013 = LINE('',#445014,#445015); +#445014 = CARTESIAN_POINT('',(125.387836,-85.045,1.585)); +#445015 = VECTOR('',#445016,1.); +#445016 = DIRECTION('',(-1.,0.,0.)); +#445017 = PLANE('',#445018); +#445018 = AXIS2_PLACEMENT_3D('',#445019,#445020,#445021); +#445019 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445020 = DIRECTION('',(0.,0.,1.)); +#445021 = DIRECTION('',(1.,0.,-0.)); +#445022 = SHELL_BASED_SURFACE_MODEL('',(#445023)); +#445023 = OPEN_SHELL('',(#445024)); +#445024 = ADVANCED_FACE('',(#445025),#445061,.T.); +#445025 = FACE_BOUND('',#445026,.F.); +#445026 = EDGE_LOOP('',(#445027,#445038,#445046,#445055)); +#445027 = ORIENTED_EDGE('',*,*,#445028,.T.); +#445028 = EDGE_CURVE('',#445029,#445031,#445033,.T.); +#445029 = VERTEX_POINT('',#445030); +#445030 = CARTESIAN_POINT('',(125.172164,-84.325,1.585)); +#445031 = VERTEX_POINT('',#445032); +#445032 = CARTESIAN_POINT('',(125.172164,-84.205,1.585)); +#445033 = CIRCLE('',#445034,6.000000000043E-02); +#445034 = AXIS2_PLACEMENT_3D('',#445035,#445036,#445037); +#445035 = CARTESIAN_POINT('',(125.17216377441,-84.265,1.585)); +#445036 = DIRECTION('',(0.,0.,-1.)); +#445037 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#445038 = ORIENTED_EDGE('',*,*,#445039,.T.); +#445039 = EDGE_CURVE('',#445031,#445040,#445042,.T.); +#445040 = VERTEX_POINT('',#445041); +#445041 = CARTESIAN_POINT('',(125.387836,-84.205,1.585)); +#445042 = LINE('',#445043,#445044); +#445043 = CARTESIAN_POINT('',(125.172164,-84.205,1.585)); +#445044 = VECTOR('',#445045,1.); +#445045 = DIRECTION('',(1.,0.,0.)); +#445046 = ORIENTED_EDGE('',*,*,#445047,.T.); +#445047 = EDGE_CURVE('',#445040,#445048,#445050,.T.); +#445048 = VERTEX_POINT('',#445049); +#445049 = CARTESIAN_POINT('',(125.387836,-84.325,1.585)); +#445050 = CIRCLE('',#445051,6.000000000043E-02); +#445051 = AXIS2_PLACEMENT_3D('',#445052,#445053,#445054); +#445052 = CARTESIAN_POINT('',(125.38783622558,-84.265,1.585)); +#445053 = DIRECTION('',(0.,0.,-1.)); +#445054 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#445055 = ORIENTED_EDGE('',*,*,#445056,.T.); +#445056 = EDGE_CURVE('',#445048,#445029,#445057,.T.); +#445057 = LINE('',#445058,#445059); +#445058 = CARTESIAN_POINT('',(125.387836,-84.325,1.585)); +#445059 = VECTOR('',#445060,1.); +#445060 = DIRECTION('',(-1.,0.,0.)); +#445061 = PLANE('',#445062); +#445062 = AXIS2_PLACEMENT_3D('',#445063,#445064,#445065); +#445063 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445064 = DIRECTION('',(0.,0.,1.)); +#445065 = DIRECTION('',(1.,0.,-0.)); +#445066 = SHELL_BASED_SURFACE_MODEL('',(#445067)); +#445067 = OPEN_SHELL('',(#445068)); +#445068 = ADVANCED_FACE('',(#445069),#445163,.T.); +#445069 = FACE_BOUND('',#445070,.F.); +#445070 = EDGE_LOOP('',(#445071,#445082,#445090,#445099,#445107,#445115, + #445124,#445132,#445141,#445149,#445157)); +#445071 = ORIENTED_EDGE('',*,*,#445072,.T.); +#445072 = EDGE_CURVE('',#445073,#445075,#445077,.T.); +#445073 = VERTEX_POINT('',#445074); +#445074 = CARTESIAN_POINT('',(127.154567,-80.062039,1.585)); +#445075 = VERTEX_POINT('',#445076); +#445076 = CARTESIAN_POINT('',(127.27,-80.085,1.585)); +#445077 = CIRCLE('',#445078,6.000007318647E-02); +#445078 = AXIS2_PLACEMENT_3D('',#445079,#445080,#445081); +#445079 = CARTESIAN_POINT('',(127.20999992681,-80.08499982331,1.585)); +#445080 = DIRECTION('',(0.,0.,-1.)); +#445081 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445082 = ORIENTED_EDGE('',*,*,#445083,.T.); +#445083 = EDGE_CURVE('',#445075,#445084,#445086,.T.); +#445084 = VERTEX_POINT('',#445085); +#445085 = CARTESIAN_POINT('',(127.27,-82.585,1.585)); +#445086 = LINE('',#445087,#445088); +#445087 = CARTESIAN_POINT('',(127.27,-80.085,1.585)); +#445088 = VECTOR('',#445089,1.); +#445089 = DIRECTION('',(0.,-1.,0.)); +#445090 = ORIENTED_EDGE('',*,*,#445091,.T.); +#445091 = EDGE_CURVE('',#445084,#445092,#445094,.T.); +#445092 = VERTEX_POINT('',#445093); +#445093 = CARTESIAN_POINT('',(127.21,-82.645,1.585)); +#445094 = CIRCLE('',#445095,5.999932016257E-02); +#445095 = AXIS2_PLACEMENT_3D('',#445096,#445097,#445098); +#445096 = CARTESIAN_POINT('',(127.21000067984,-82.58500067984,1.585)); +#445097 = DIRECTION('',(0.,0.,-1.)); +#445098 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#445099 = ORIENTED_EDGE('',*,*,#445100,.T.); +#445100 = EDGE_CURVE('',#445092,#445101,#445103,.T.); +#445101 = VERTEX_POINT('',#445102); +#445102 = CARTESIAN_POINT('',(126.22,-82.645,1.585)); +#445103 = LINE('',#445104,#445105); +#445104 = CARTESIAN_POINT('',(127.21,-82.645,1.585)); +#445105 = VECTOR('',#445106,1.); +#445106 = DIRECTION('',(-1.,0.,0.)); +#445107 = ORIENTED_EDGE('',*,*,#445108,.T.); +#445108 = EDGE_CURVE('',#445101,#445109,#445111,.T.); +#445109 = VERTEX_POINT('',#445110); +#445110 = CARTESIAN_POINT('',(126.22,-83.575,1.585)); +#445111 = LINE('',#445112,#445113); +#445112 = CARTESIAN_POINT('',(126.22,-82.645,1.585)); +#445113 = VECTOR('',#445114,1.); +#445114 = DIRECTION('',(0.,-1.,0.)); +#445115 = ORIENTED_EDGE('',*,*,#445116,.T.); +#445116 = EDGE_CURVE('',#445109,#445117,#445119,.T.); +#445117 = VERTEX_POINT('',#445118); +#445118 = CARTESIAN_POINT('',(126.1,-83.575,1.585)); +#445119 = CIRCLE('',#445120,6.000000000043E-02); +#445120 = AXIS2_PLACEMENT_3D('',#445121,#445122,#445123); +#445121 = CARTESIAN_POINT('',(126.16,-83.57500022558,1.585)); +#445122 = DIRECTION('',(0.,0.,-1.)); +#445123 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#445124 = ORIENTED_EDGE('',*,*,#445125,.T.); +#445125 = EDGE_CURVE('',#445117,#445126,#445128,.T.); +#445126 = VERTEX_POINT('',#445127); +#445127 = CARTESIAN_POINT('',(126.1,-82.585,1.585)); +#445128 = LINE('',#445129,#445130); +#445129 = CARTESIAN_POINT('',(126.1,-83.575,1.585)); +#445130 = VECTOR('',#445131,1.); +#445131 = DIRECTION('',(0.,1.,0.)); +#445132 = ORIENTED_EDGE('',*,*,#445133,.T.); +#445133 = EDGE_CURVE('',#445126,#445134,#445136,.T.); +#445134 = VERTEX_POINT('',#445135); +#445135 = CARTESIAN_POINT('',(126.16,-82.525,1.585)); +#445136 = CIRCLE('',#445137,5.999932016262E-02); +#445137 = AXIS2_PLACEMENT_3D('',#445138,#445139,#445140); +#445138 = CARTESIAN_POINT('',(126.15999932015,-82.58499932015,1.585)); +#445139 = DIRECTION('',(0.,0.,-1.)); +#445140 = DIRECTION('',(-0.999999999936,-1.133081541087E-05,-0.)); +#445141 = ORIENTED_EDGE('',*,*,#445142,.T.); +#445142 = EDGE_CURVE('',#445134,#445143,#445145,.T.); +#445143 = VERTEX_POINT('',#445144); +#445144 = CARTESIAN_POINT('',(127.15,-82.525,1.585)); +#445145 = LINE('',#445146,#445147); +#445146 = CARTESIAN_POINT('',(126.16,-82.525,1.585)); +#445147 = VECTOR('',#445148,1.); +#445148 = DIRECTION('',(1.,0.,0.)); +#445149 = ORIENTED_EDGE('',*,*,#445150,.T.); +#445150 = EDGE_CURVE('',#445143,#445151,#445153,.T.); +#445151 = VERTEX_POINT('',#445152); +#445152 = CARTESIAN_POINT('',(127.15,-80.085,1.585)); +#445153 = LINE('',#445154,#445155); +#445154 = CARTESIAN_POINT('',(127.15,-82.525,1.585)); +#445155 = VECTOR('',#445156,1.); +#445156 = DIRECTION('',(0.,1.,0.)); +#445157 = ORIENTED_EDGE('',*,*,#445158,.T.); +#445158 = EDGE_CURVE('',#445151,#445073,#445159,.T.); +#445159 = LINE('',#445160,#445161); +#445160 = CARTESIAN_POINT('',(127.15,-80.085,1.585)); +#445161 = VECTOR('',#445162,1.); +#445162 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445163 = PLANE('',#445164); +#445164 = AXIS2_PLACEMENT_3D('',#445165,#445166,#445167); +#445165 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445166 = DIRECTION('',(0.,0.,1.)); +#445167 = DIRECTION('',(1.,0.,-0.)); +#445168 = SHELL_BASED_SURFACE_MODEL('',(#445169)); +#445169 = OPEN_SHELL('',(#445170)); +#445170 = ADVANCED_FACE('',(#445171),#445215,.T.); +#445171 = FACE_BOUND('',#445172,.F.); +#445172 = EDGE_LOOP('',(#445173,#445184,#445192,#445201,#445209)); +#445173 = ORIENTED_EDGE('',*,*,#445174,.T.); +#445174 = EDGE_CURVE('',#445175,#445177,#445179,.T.); +#445175 = VERTEX_POINT('',#445176); +#445176 = CARTESIAN_POINT('',(148.064567,-82.563398,1.585)); +#445177 = VERTEX_POINT('',#445178); +#445178 = CARTESIAN_POINT('',(148.18,-82.586359,1.585)); +#445179 = CIRCLE('',#445180,6.000007318647E-02); +#445180 = AXIS2_PLACEMENT_3D('',#445181,#445182,#445183); +#445181 = CARTESIAN_POINT('',(148.11999992681,-82.58635882331,1.585)); +#445182 = DIRECTION('',(0.,0.,-1.)); +#445183 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445184 = ORIENTED_EDGE('',*,*,#445185,.T.); +#445185 = EDGE_CURVE('',#445177,#445186,#445188,.T.); +#445186 = VERTEX_POINT('',#445187); +#445187 = CARTESIAN_POINT('',(148.18,-82.893641,1.585)); +#445188 = LINE('',#445189,#445190); +#445189 = CARTESIAN_POINT('',(148.18,-82.586359,1.585)); +#445190 = VECTOR('',#445191,1.); +#445191 = DIRECTION('',(0.,-1.,0.)); +#445192 = ORIENTED_EDGE('',*,*,#445193,.T.); +#445193 = EDGE_CURVE('',#445186,#445194,#445196,.T.); +#445194 = VERTEX_POINT('',#445195); +#445195 = CARTESIAN_POINT('',(148.06,-82.893641,1.585)); +#445196 = CIRCLE('',#445197,6.000000000043E-02); +#445197 = AXIS2_PLACEMENT_3D('',#445198,#445199,#445200); +#445198 = CARTESIAN_POINT('',(148.12,-82.89364122558,1.585)); +#445199 = DIRECTION('',(0.,0.,-1.)); +#445200 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#445201 = ORIENTED_EDGE('',*,*,#445202,.T.); +#445202 = EDGE_CURVE('',#445194,#445203,#445205,.T.); +#445203 = VERTEX_POINT('',#445204); +#445204 = CARTESIAN_POINT('',(148.06,-82.586359,1.585)); +#445205 = LINE('',#445206,#445207); +#445206 = CARTESIAN_POINT('',(148.06,-82.893641,1.585)); +#445207 = VECTOR('',#445208,1.); +#445208 = DIRECTION('',(0.,1.,0.)); +#445209 = ORIENTED_EDGE('',*,*,#445210,.T.); +#445210 = EDGE_CURVE('',#445203,#445175,#445211,.T.); +#445211 = LINE('',#445212,#445213); +#445212 = CARTESIAN_POINT('',(148.06,-82.586359,1.585)); +#445213 = VECTOR('',#445214,1.); +#445214 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445215 = PLANE('',#445216); +#445216 = AXIS2_PLACEMENT_3D('',#445217,#445218,#445219); +#445217 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445218 = DIRECTION('',(0.,0.,1.)); +#445219 = DIRECTION('',(1.,0.,-0.)); +#445220 = SHELL_BASED_SURFACE_MODEL('',(#445221)); +#445221 = OPEN_SHELL('',(#445222)); +#445222 = ADVANCED_FACE('',(#445223),#445267,.T.); +#445223 = FACE_BOUND('',#445224,.F.); +#445224 = EDGE_LOOP('',(#445225,#445236,#445244,#445253,#445261)); +#445225 = ORIENTED_EDGE('',*,*,#445226,.T.); +#445226 = EDGE_CURVE('',#445227,#445229,#445231,.T.); +#445227 = VERTEX_POINT('',#445228); +#445228 = CARTESIAN_POINT('',(148.824567,-82.563398,1.585)); +#445229 = VERTEX_POINT('',#445230); +#445230 = CARTESIAN_POINT('',(148.94,-82.586359,1.585)); +#445231 = CIRCLE('',#445232,6.000007318647E-02); +#445232 = AXIS2_PLACEMENT_3D('',#445233,#445234,#445235); +#445233 = CARTESIAN_POINT('',(148.87999992681,-82.58635882331,1.585)); +#445234 = DIRECTION('',(0.,0.,-1.)); +#445235 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445236 = ORIENTED_EDGE('',*,*,#445237,.T.); +#445237 = EDGE_CURVE('',#445229,#445238,#445240,.T.); +#445238 = VERTEX_POINT('',#445239); +#445239 = CARTESIAN_POINT('',(148.94,-82.893641,1.585)); +#445240 = LINE('',#445241,#445242); +#445241 = CARTESIAN_POINT('',(148.94,-82.586359,1.585)); +#445242 = VECTOR('',#445243,1.); +#445243 = DIRECTION('',(0.,-1.,0.)); +#445244 = ORIENTED_EDGE('',*,*,#445245,.T.); +#445245 = EDGE_CURVE('',#445238,#445246,#445248,.T.); +#445246 = VERTEX_POINT('',#445247); +#445247 = CARTESIAN_POINT('',(148.82,-82.893641,1.585)); +#445248 = CIRCLE('',#445249,6.000000000043E-02); +#445249 = AXIS2_PLACEMENT_3D('',#445250,#445251,#445252); +#445250 = CARTESIAN_POINT('',(148.88,-82.89364122558,1.585)); +#445251 = DIRECTION('',(0.,0.,-1.)); +#445252 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#445253 = ORIENTED_EDGE('',*,*,#445254,.T.); +#445254 = EDGE_CURVE('',#445246,#445255,#445257,.T.); +#445255 = VERTEX_POINT('',#445256); +#445256 = CARTESIAN_POINT('',(148.82,-82.586359,1.585)); +#445257 = LINE('',#445258,#445259); +#445258 = CARTESIAN_POINT('',(148.82,-82.893641,1.585)); +#445259 = VECTOR('',#445260,1.); +#445260 = DIRECTION('',(0.,1.,0.)); +#445261 = ORIENTED_EDGE('',*,*,#445262,.T.); +#445262 = EDGE_CURVE('',#445255,#445227,#445263,.T.); +#445263 = LINE('',#445264,#445265); +#445264 = CARTESIAN_POINT('',(148.82,-82.586359,1.585)); +#445265 = VECTOR('',#445266,1.); +#445266 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445267 = PLANE('',#445268); +#445268 = AXIS2_PLACEMENT_3D('',#445269,#445270,#445271); +#445269 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445270 = DIRECTION('',(0.,0.,1.)); +#445271 = DIRECTION('',(1.,0.,-0.)); +#445272 = SHELL_BASED_SURFACE_MODEL('',(#445273)); +#445273 = OPEN_SHELL('',(#445274)); +#445274 = ADVANCED_FACE('',(#445275),#445344,.T.); +#445275 = FACE_BOUND('',#445276,.F.); +#445276 = EDGE_LOOP('',(#445277,#445288,#445296,#445304,#445313,#445321, + #445330,#445338)); +#445277 = ORIENTED_EDGE('',*,*,#445278,.T.); +#445278 = EDGE_CURVE('',#445279,#445281,#445283,.T.); +#445279 = VERTEX_POINT('',#445280); +#445280 = CARTESIAN_POINT('',(128.944567,-81.887039,1.585)); +#445281 = VERTEX_POINT('',#445282); +#445282 = CARTESIAN_POINT('',(129.06,-81.91,1.585)); +#445283 = CIRCLE('',#445284,6.000007318647E-02); +#445284 = AXIS2_PLACEMENT_3D('',#445285,#445286,#445287); +#445285 = CARTESIAN_POINT('',(128.99999992681,-81.90999982331,1.585)); +#445286 = DIRECTION('',(0.,0.,-1.)); +#445287 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445288 = ORIENTED_EDGE('',*,*,#445289,.T.); +#445289 = EDGE_CURVE('',#445281,#445290,#445292,.T.); +#445290 = VERTEX_POINT('',#445291); +#445291 = CARTESIAN_POINT('',(129.06,-82.6,1.585)); +#445292 = LINE('',#445293,#445294); +#445293 = CARTESIAN_POINT('',(129.06,-81.91,1.585)); +#445294 = VECTOR('',#445295,1.); +#445295 = DIRECTION('',(0.,-1.,0.)); +#445296 = ORIENTED_EDGE('',*,*,#445297,.T.); +#445297 = EDGE_CURVE('',#445290,#445298,#445300,.T.); +#445298 = VERTEX_POINT('',#445299); +#445299 = CARTESIAN_POINT('',(130.,-82.6,1.585)); +#445300 = LINE('',#445301,#445302); +#445301 = CARTESIAN_POINT('',(129.06,-82.6,1.585)); +#445302 = VECTOR('',#445303,1.); +#445303 = DIRECTION('',(1.,0.,0.)); +#445304 = ORIENTED_EDGE('',*,*,#445305,.T.); +#445305 = EDGE_CURVE('',#445298,#445306,#445308,.T.); +#445306 = VERTEX_POINT('',#445307); +#445307 = CARTESIAN_POINT('',(130.,-82.72,1.585)); +#445308 = CIRCLE('',#445309,6.000000000043E-02); +#445309 = AXIS2_PLACEMENT_3D('',#445310,#445311,#445312); +#445310 = CARTESIAN_POINT('',(130.00000022558,-82.66,1.585)); +#445311 = DIRECTION('',(0.,0.,-1.)); +#445312 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#445313 = ORIENTED_EDGE('',*,*,#445314,.T.); +#445314 = EDGE_CURVE('',#445306,#445315,#445317,.T.); +#445315 = VERTEX_POINT('',#445316); +#445316 = CARTESIAN_POINT('',(129.,-82.72,1.585)); +#445317 = LINE('',#445318,#445319); +#445318 = CARTESIAN_POINT('',(130.,-82.72,1.585)); +#445319 = VECTOR('',#445320,1.); +#445320 = DIRECTION('',(-1.,0.,0.)); +#445321 = ORIENTED_EDGE('',*,*,#445322,.T.); +#445322 = EDGE_CURVE('',#445315,#445323,#445325,.T.); +#445323 = VERTEX_POINT('',#445324); +#445324 = CARTESIAN_POINT('',(128.94,-82.66,1.585)); +#445325 = CIRCLE('',#445326,5.999932016257E-02); +#445326 = AXIS2_PLACEMENT_3D('',#445327,#445328,#445329); +#445327 = CARTESIAN_POINT('',(128.99999932015,-82.66000067984,1.585)); +#445328 = DIRECTION('',(0.,0.,-1.)); +#445329 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#445330 = ORIENTED_EDGE('',*,*,#445331,.T.); +#445331 = EDGE_CURVE('',#445323,#445332,#445334,.T.); +#445332 = VERTEX_POINT('',#445333); +#445333 = CARTESIAN_POINT('',(128.94,-81.91,1.585)); +#445334 = LINE('',#445335,#445336); +#445335 = CARTESIAN_POINT('',(128.94,-82.66,1.585)); +#445336 = VECTOR('',#445337,1.); +#445337 = DIRECTION('',(0.,1.,0.)); +#445338 = ORIENTED_EDGE('',*,*,#445339,.T.); +#445339 = EDGE_CURVE('',#445332,#445279,#445340,.T.); +#445340 = LINE('',#445341,#445342); +#445341 = CARTESIAN_POINT('',(128.94,-81.91,1.585)); +#445342 = VECTOR('',#445343,1.); +#445343 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445344 = PLANE('',#445345); +#445345 = AXIS2_PLACEMENT_3D('',#445346,#445347,#445348); +#445346 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445347 = DIRECTION('',(0.,0.,1.)); +#445348 = DIRECTION('',(1.,0.,-0.)); +#445349 = SHELL_BASED_SURFACE_MODEL('',(#445350)); +#445350 = OPEN_SHELL('',(#445351)); +#445351 = ADVANCED_FACE('',(#445352),#445421,.T.); +#445352 = FACE_BOUND('',#445353,.F.); +#445353 = EDGE_LOOP('',(#445354,#445365,#445373,#445382,#445390,#445399, + #445407,#445415)); +#445354 = ORIENTED_EDGE('',*,*,#445355,.T.); +#445355 = EDGE_CURVE('',#445356,#445358,#445360,.T.); +#445356 = VERTEX_POINT('',#445357); +#445357 = CARTESIAN_POINT('',(146.944567,-81.887039,1.585)); +#445358 = VERTEX_POINT('',#445359); +#445359 = CARTESIAN_POINT('',(147.06,-81.91,1.585)); +#445360 = CIRCLE('',#445361,6.000007318647E-02); +#445361 = AXIS2_PLACEMENT_3D('',#445362,#445363,#445364); +#445362 = CARTESIAN_POINT('',(146.99999992681,-81.90999982331,1.585)); +#445363 = DIRECTION('',(0.,0.,-1.)); +#445364 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445365 = ORIENTED_EDGE('',*,*,#445366,.T.); +#445366 = EDGE_CURVE('',#445358,#445367,#445369,.T.); +#445367 = VERTEX_POINT('',#445368); +#445368 = CARTESIAN_POINT('',(147.06,-82.66,1.585)); +#445369 = LINE('',#445370,#445371); +#445370 = CARTESIAN_POINT('',(147.06,-81.91,1.585)); +#445371 = VECTOR('',#445372,1.); +#445372 = DIRECTION('',(0.,-1.,0.)); +#445373 = ORIENTED_EDGE('',*,*,#445374,.T.); +#445374 = EDGE_CURVE('',#445367,#445375,#445377,.T.); +#445375 = VERTEX_POINT('',#445376); +#445376 = CARTESIAN_POINT('',(147.,-82.72,1.585)); +#445377 = CIRCLE('',#445378,5.999932016262E-02); +#445378 = AXIS2_PLACEMENT_3D('',#445379,#445380,#445381); +#445379 = CARTESIAN_POINT('',(147.00000067984,-82.66000067984,1.585)); +#445380 = DIRECTION('',(0.,0.,-1.)); +#445381 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#445382 = ORIENTED_EDGE('',*,*,#445383,.T.); +#445383 = EDGE_CURVE('',#445375,#445384,#445386,.T.); +#445384 = VERTEX_POINT('',#445385); +#445385 = CARTESIAN_POINT('',(146.,-82.72,1.585)); +#445386 = LINE('',#445387,#445388); +#445387 = CARTESIAN_POINT('',(147.,-82.72,1.585)); +#445388 = VECTOR('',#445389,1.); +#445389 = DIRECTION('',(-1.,0.,0.)); +#445390 = ORIENTED_EDGE('',*,*,#445391,.T.); +#445391 = EDGE_CURVE('',#445384,#445392,#445394,.T.); +#445392 = VERTEX_POINT('',#445393); +#445393 = CARTESIAN_POINT('',(146.,-82.6,1.585)); +#445394 = CIRCLE('',#445395,6.000000000042E-02); +#445395 = AXIS2_PLACEMENT_3D('',#445396,#445397,#445398); +#445396 = CARTESIAN_POINT('',(145.99999977441,-82.66,1.585)); +#445397 = DIRECTION('',(0.,0.,-1.)); +#445398 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#445399 = ORIENTED_EDGE('',*,*,#445400,.T.); +#445400 = EDGE_CURVE('',#445392,#445401,#445403,.T.); +#445401 = VERTEX_POINT('',#445402); +#445402 = CARTESIAN_POINT('',(146.94,-82.6,1.585)); +#445403 = LINE('',#445404,#445405); +#445404 = CARTESIAN_POINT('',(146.,-82.6,1.585)); +#445405 = VECTOR('',#445406,1.); +#445406 = DIRECTION('',(1.,0.,0.)); +#445407 = ORIENTED_EDGE('',*,*,#445408,.T.); +#445408 = EDGE_CURVE('',#445401,#445409,#445411,.T.); +#445409 = VERTEX_POINT('',#445410); +#445410 = CARTESIAN_POINT('',(146.94,-81.91,1.585)); +#445411 = LINE('',#445412,#445413); +#445412 = CARTESIAN_POINT('',(146.94,-82.6,1.585)); +#445413 = VECTOR('',#445414,1.); +#445414 = DIRECTION('',(0.,1.,0.)); +#445415 = ORIENTED_EDGE('',*,*,#445416,.T.); +#445416 = EDGE_CURVE('',#445409,#445356,#445417,.T.); +#445417 = LINE('',#445418,#445419); +#445418 = CARTESIAN_POINT('',(146.94,-81.91,1.585)); +#445419 = VECTOR('',#445420,1.); +#445420 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445421 = PLANE('',#445422); +#445422 = AXIS2_PLACEMENT_3D('',#445423,#445424,#445425); +#445423 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445424 = DIRECTION('',(0.,0.,1.)); +#445425 = DIRECTION('',(1.,0.,-0.)); +#445426 = SHELL_BASED_SURFACE_MODEL('',(#445427)); +#445427 = OPEN_SHELL('',(#445428)); +#445428 = ADVANCED_FACE('',(#445429),#445498,.T.); +#445429 = FACE_BOUND('',#445430,.F.); +#445430 = EDGE_LOOP('',(#445431,#445442,#445450,#445458,#445467,#445475, + #445484,#445492)); +#445431 = ORIENTED_EDGE('',*,*,#445432,.T.); +#445432 = EDGE_CURVE('',#445433,#445435,#445437,.T.); +#445433 = VERTEX_POINT('',#445434); +#445434 = CARTESIAN_POINT('',(120.934567,-80.062039,1.585)); +#445435 = VERTEX_POINT('',#445436); +#445436 = CARTESIAN_POINT('',(121.05,-80.085,1.585)); +#445437 = CIRCLE('',#445438,6.000007318647E-02); +#445438 = AXIS2_PLACEMENT_3D('',#445439,#445440,#445441); +#445439 = CARTESIAN_POINT('',(120.98999992681,-80.08499982331,1.585)); +#445440 = DIRECTION('',(0.,0.,-1.)); +#445441 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#445442 = ORIENTED_EDGE('',*,*,#445443,.T.); +#445443 = EDGE_CURVE('',#445435,#445444,#445446,.T.); +#445444 = VERTEX_POINT('',#445445); +#445445 = CARTESIAN_POINT('',(121.05,-82.525,1.585)); +#445446 = LINE('',#445447,#445448); +#445447 = CARTESIAN_POINT('',(121.05,-80.085,1.585)); +#445448 = VECTOR('',#445449,1.); +#445449 = DIRECTION('',(0.,-1.,0.)); +#445450 = ORIENTED_EDGE('',*,*,#445451,.T.); +#445451 = EDGE_CURVE('',#445444,#445452,#445454,.T.); +#445452 = VERTEX_POINT('',#445453); +#445453 = CARTESIAN_POINT('',(122.04,-82.525,1.585)); +#445454 = LINE('',#445455,#445456); +#445455 = CARTESIAN_POINT('',(121.05,-82.525,1.585)); +#445456 = VECTOR('',#445457,1.); +#445457 = DIRECTION('',(1.,0.,0.)); +#445458 = ORIENTED_EDGE('',*,*,#445459,.T.); +#445459 = EDGE_CURVE('',#445452,#445460,#445462,.T.); +#445460 = VERTEX_POINT('',#445461); +#445461 = CARTESIAN_POINT('',(122.04,-82.645,1.585)); +#445462 = CIRCLE('',#445463,6.000000000042E-02); +#445463 = AXIS2_PLACEMENT_3D('',#445464,#445465,#445466); +#445464 = CARTESIAN_POINT('',(122.04000022558,-82.585,1.585)); +#445465 = DIRECTION('',(0.,0.,-1.)); +#445466 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#445467 = ORIENTED_EDGE('',*,*,#445468,.T.); +#445468 = EDGE_CURVE('',#445460,#445469,#445471,.T.); +#445469 = VERTEX_POINT('',#445470); +#445470 = CARTESIAN_POINT('',(120.99,-82.645,1.585)); +#445471 = LINE('',#445472,#445473); +#445472 = CARTESIAN_POINT('',(122.04,-82.645,1.585)); +#445473 = VECTOR('',#445474,1.); +#445474 = DIRECTION('',(-1.,0.,0.)); +#445475 = ORIENTED_EDGE('',*,*,#445476,.T.); +#445476 = EDGE_CURVE('',#445469,#445477,#445479,.T.); +#445477 = VERTEX_POINT('',#445478); +#445478 = CARTESIAN_POINT('',(120.93,-82.585,1.585)); +#445479 = CIRCLE('',#445480,5.999932016258E-02); +#445480 = AXIS2_PLACEMENT_3D('',#445481,#445482,#445483); +#445481 = CARTESIAN_POINT('',(120.98999932015,-82.58500067984,1.585)); +#445482 = DIRECTION('',(0.,0.,-1.)); +#445483 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#445484 = ORIENTED_EDGE('',*,*,#445485,.T.); +#445485 = EDGE_CURVE('',#445477,#445486,#445488,.T.); +#445486 = VERTEX_POINT('',#445487); +#445487 = CARTESIAN_POINT('',(120.93,-80.085,1.585)); +#445488 = LINE('',#445489,#445490); +#445489 = CARTESIAN_POINT('',(120.93,-82.585,1.585)); +#445490 = VECTOR('',#445491,1.); +#445491 = DIRECTION('',(0.,1.,0.)); +#445492 = ORIENTED_EDGE('',*,*,#445493,.T.); +#445493 = EDGE_CURVE('',#445486,#445433,#445494,.T.); +#445494 = LINE('',#445495,#445496); +#445495 = CARTESIAN_POINT('',(120.93,-80.085,1.585)); +#445496 = VECTOR('',#445497,1.); +#445497 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#445498 = PLANE('',#445499); +#445499 = AXIS2_PLACEMENT_3D('',#445500,#445501,#445502); +#445500 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445501 = DIRECTION('',(0.,0.,1.)); +#445502 = DIRECTION('',(1.,0.,-0.)); +#445503 = SHELL_BASED_SURFACE_MODEL('',(#445504)); +#445504 = OPEN_SHELL('',(#445505)); +#445505 = ADVANCED_FACE('',(#445506),#445542,.T.); +#445506 = FACE_BOUND('',#445507,.F.); +#445507 = EDGE_LOOP('',(#445508,#445519,#445527,#445536)); +#445508 = ORIENTED_EDGE('',*,*,#445509,.T.); +#445509 = EDGE_CURVE('',#445510,#445512,#445514,.T.); +#445510 = VERTEX_POINT('',#445511); +#445511 = CARTESIAN_POINT('',(122.16,-78.175,1.585)); +#445512 = VERTEX_POINT('',#445513); +#445513 = CARTESIAN_POINT('',(122.16,-78.055,1.585)); +#445514 = CIRCLE('',#445515,6.000000000042E-02); +#445515 = AXIS2_PLACEMENT_3D('',#445516,#445517,#445518); +#445516 = CARTESIAN_POINT('',(122.15999977441,-78.115,1.585)); +#445517 = DIRECTION('',(0.,0.,-1.)); +#445518 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#445519 = ORIENTED_EDGE('',*,*,#445520,.T.); +#445520 = EDGE_CURVE('',#445512,#445521,#445523,.T.); +#445521 = VERTEX_POINT('',#445522); +#445522 = CARTESIAN_POINT('',(126.04,-78.055,1.585)); +#445523 = LINE('',#445524,#445525); +#445524 = CARTESIAN_POINT('',(122.16,-78.055,1.585)); +#445525 = VECTOR('',#445526,1.); +#445526 = DIRECTION('',(1.,0.,0.)); +#445527 = ORIENTED_EDGE('',*,*,#445528,.T.); +#445528 = EDGE_CURVE('',#445521,#445529,#445531,.T.); +#445529 = VERTEX_POINT('',#445530); +#445530 = CARTESIAN_POINT('',(126.04,-78.175,1.585)); +#445531 = CIRCLE('',#445532,6.000000000042E-02); +#445532 = AXIS2_PLACEMENT_3D('',#445533,#445534,#445535); +#445533 = CARTESIAN_POINT('',(126.04000022558,-78.115,1.585)); +#445534 = DIRECTION('',(0.,0.,-1.)); +#445535 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#445536 = ORIENTED_EDGE('',*,*,#445537,.T.); +#445537 = EDGE_CURVE('',#445529,#445510,#445538,.T.); +#445538 = LINE('',#445539,#445540); +#445539 = CARTESIAN_POINT('',(126.04,-78.175,1.585)); +#445540 = VECTOR('',#445541,1.); +#445541 = DIRECTION('',(-1.,0.,0.)); +#445542 = PLANE('',#445543); +#445543 = AXIS2_PLACEMENT_3D('',#445544,#445545,#445546); +#445544 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445545 = DIRECTION('',(0.,0.,1.)); +#445546 = DIRECTION('',(1.,0.,-0.)); +#445547 = SHELL_BASED_SURFACE_MODEL('',(#445548)); +#445548 = OPEN_SHELL('',(#445549)); +#445549 = ADVANCED_FACE('',(#445550,#445666),#445749,.T.); +#445550 = FACE_BOUND('',#445551,.F.); +#445551 = EDGE_LOOP('',(#445552,#445563,#445571,#445580,#445588,#445596, + #445604,#445612,#445620,#445628,#445636,#445644,#445652,#445660)); +#445552 = ORIENTED_EDGE('',*,*,#445553,.T.); +#445553 = EDGE_CURVE('',#445554,#445556,#445558,.T.); +#445554 = VERTEX_POINT('',#445555); +#445555 = CARTESIAN_POINT('',(121.653171,-76.44436,1.585)); +#445556 = VERTEX_POINT('',#445557); +#445557 = CARTESIAN_POINT('',(121.703171,-76.39436,1.585)); +#445558 = CIRCLE('',#445559,5.000014378932E-02); +#445559 = AXIS2_PLACEMENT_3D('',#445560,#445561,#445562); +#445560 = CARTESIAN_POINT('',(121.70317114378,-76.44436014378,1.585)); +#445561 = DIRECTION('',(0.,0.,-1.)); +#445562 = DIRECTION('',(-0.999999999996,2.875774186501E-06,0.)); +#445563 = ORIENTED_EDGE('',*,*,#445564,.T.); +#445564 = EDGE_CURVE('',#445556,#445565,#445567,.T.); +#445565 = VERTEX_POINT('',#445566); +#445566 = CARTESIAN_POINT('',(122.503171,-76.39436,1.585)); +#445567 = LINE('',#445568,#445569); +#445568 = CARTESIAN_POINT('',(121.703171,-76.39436,1.585)); +#445569 = VECTOR('',#445570,1.); +#445570 = DIRECTION('',(1.,0.,0.)); +#445571 = ORIENTED_EDGE('',*,*,#445572,.T.); +#445572 = EDGE_CURVE('',#445565,#445573,#445575,.T.); +#445573 = VERTEX_POINT('',#445574); +#445574 = CARTESIAN_POINT('',(122.553171,-76.44436,1.585)); +#445575 = CIRCLE('',#445576,5.000014378936E-02); +#445576 = AXIS2_PLACEMENT_3D('',#445577,#445578,#445579); +#445577 = CARTESIAN_POINT('',(122.50317085621,-76.44436014378,1.585)); +#445578 = DIRECTION('',(0.,0.,-1.)); +#445579 = DIRECTION('',(2.875774470715E-06,0.999999999996,0.)); +#445580 = ORIENTED_EDGE('',*,*,#445581,.T.); +#445581 = EDGE_CURVE('',#445573,#445582,#445584,.T.); +#445582 = VERTEX_POINT('',#445583); +#445583 = CARTESIAN_POINT('',(122.550605,-76.650647,1.585)); +#445584 = LINE('',#445585,#445586); +#445585 = CARTESIAN_POINT('',(122.553171,-76.44436,1.585)); +#445586 = VECTOR('',#445587,1.); +#445587 = DIRECTION('',(-1.243801842435E-02,-0.999922644857,0.)); +#445588 = ORIENTED_EDGE('',*,*,#445589,.T.); +#445589 = EDGE_CURVE('',#445582,#445590,#445592,.T.); +#445590 = VERTEX_POINT('',#445591); +#445591 = CARTESIAN_POINT('',(122.506819,-76.774916,1.585)); +#445592 = LINE('',#445593,#445594); +#445593 = CARTESIAN_POINT('',(122.550605,-76.650647,1.585)); +#445594 = VECTOR('',#445595,1.); +#445595 = DIRECTION('',(-0.332323027254,-0.94316562997,0.)); +#445596 = ORIENTED_EDGE('',*,*,#445597,.T.); +#445597 = EDGE_CURVE('',#445590,#445598,#445600,.T.); +#445598 = VERTEX_POINT('',#445599); +#445599 = CARTESIAN_POINT('',(122.411247,-76.870033,1.585)); +#445600 = LINE('',#445601,#445602); +#445601 = CARTESIAN_POINT('',(122.506819,-76.774916,1.585)); +#445602 = VECTOR('',#445603,1.); +#445603 = DIRECTION('',(-0.708791979753,-0.705417556797,0.)); +#445604 = ORIENTED_EDGE('',*,*,#445605,.T.); +#445605 = EDGE_CURVE('',#445598,#445606,#445608,.T.); +#445606 = VERTEX_POINT('',#445607); +#445607 = CARTESIAN_POINT('',(122.324822,-76.911914,1.585)); +#445608 = LINE('',#445609,#445610); +#445609 = CARTESIAN_POINT('',(122.411247,-76.870033,1.585)); +#445610 = VECTOR('',#445611,1.); +#445611 = DIRECTION('',(-0.899904139117,-0.436087766854,0.)); +#445612 = ORIENTED_EDGE('',*,*,#445613,.T.); +#445613 = EDGE_CURVE('',#445606,#445614,#445616,.T.); +#445614 = VERTEX_POINT('',#445615); +#445615 = CARTESIAN_POINT('',(122.160314,-76.951503,1.585)); +#445616 = LINE('',#445617,#445618); +#445617 = CARTESIAN_POINT('',(122.324822,-76.911914,1.585)); +#445618 = VECTOR('',#445619,1.); +#445619 = DIRECTION('',(-0.97224350737,-0.233971285368,0.)); +#445620 = ORIENTED_EDGE('',*,*,#445621,.T.); +#445621 = EDGE_CURVE('',#445614,#445622,#445624,.T.); +#445622 = VERTEX_POINT('',#445623); +#445623 = CARTESIAN_POINT('',(122.033901,-76.95001,1.585)); +#445624 = LINE('',#445625,#445626); +#445625 = CARTESIAN_POINT('',(122.160314,-76.951503,1.585)); +#445626 = VECTOR('',#445627,1.); +#445627 = DIRECTION('',(-0.999930263409,1.180967055023E-02,0.)); +#445628 = ORIENTED_EDGE('',*,*,#445629,.T.); +#445629 = EDGE_CURVE('',#445622,#445630,#445632,.T.); +#445630 = VERTEX_POINT('',#445631); +#445631 = CARTESIAN_POINT('',(121.871286,-76.908128,1.585)); +#445632 = LINE('',#445633,#445634); +#445633 = CARTESIAN_POINT('',(122.033901,-76.95001,1.585)); +#445634 = VECTOR('',#445635,1.); +#445635 = DIRECTION('',(-0.96839703585,0.249413674357,0.)); +#445636 = ORIENTED_EDGE('',*,*,#445637,.T.); +#445637 = EDGE_CURVE('',#445630,#445638,#445640,.T.); +#445638 = VERTEX_POINT('',#445639); +#445639 = CARTESIAN_POINT('',(121.782102,-76.860667,1.585)); +#445640 = LINE('',#445641,#445642); +#445641 = CARTESIAN_POINT('',(121.871286,-76.908128,1.585)); +#445642 = VECTOR('',#445643,1.); +#445643 = DIRECTION('',(-0.88277920319,0.469788120768,0.)); +#445644 = ORIENTED_EDGE('',*,*,#445645,.T.); +#445645 = EDGE_CURVE('',#445638,#445646,#445648,.T.); +#445646 = VERTEX_POINT('',#445647); +#445647 = CARTESIAN_POINT('',(121.699523,-76.774916,1.585)); +#445648 = LINE('',#445649,#445650); +#445649 = CARTESIAN_POINT('',(121.782102,-76.860667,1.585)); +#445650 = VECTOR('',#445651,1.); +#445651 = DIRECTION('',(-0.693658959064,0.720303580798,0.)); +#445652 = ORIENTED_EDGE('',*,*,#445653,.T.); +#445653 = EDGE_CURVE('',#445646,#445654,#445656,.T.); +#445654 = VERTEX_POINT('',#445655); +#445655 = CARTESIAN_POINT('',(121.653171,-76.634836,1.585)); +#445656 = LINE('',#445657,#445658); +#445657 = CARTESIAN_POINT('',(121.699523,-76.774916,1.585)); +#445658 = VECTOR('',#445659,1.); +#445659 = DIRECTION('',(-0.314144994158,0.949375016864,0.)); +#445660 = ORIENTED_EDGE('',*,*,#445661,.T.); +#445661 = EDGE_CURVE('',#445654,#445554,#445662,.T.); +#445662 = LINE('',#445663,#445664); +#445663 = CARTESIAN_POINT('',(121.653171,-76.634836,1.585)); +#445664 = VECTOR('',#445665,1.); +#445665 = DIRECTION('',(0.,1.,0.)); +#445666 = FACE_BOUND('',#445667,.F.); +#445667 = EDGE_LOOP('',(#445668,#445678,#445686,#445694,#445702,#445710, + #445719,#445727,#445735,#445743)); +#445668 = ORIENTED_EDGE('',*,*,#445669,.T.); +#445669 = EDGE_CURVE('',#445670,#445672,#445674,.T.); +#445670 = VERTEX_POINT('',#445671); +#445671 = CARTESIAN_POINT('',(122.453171,-76.626723,1.585)); +#445672 = VERTEX_POINT('',#445673); +#445673 = CARTESIAN_POINT('',(122.453171,-76.49436,1.585)); +#445674 = LINE('',#445675,#445676); +#445675 = CARTESIAN_POINT('',(122.453171,-76.626723,1.585)); +#445676 = VECTOR('',#445677,1.); +#445677 = DIRECTION('',(0.,1.,0.)); +#445678 = ORIENTED_EDGE('',*,*,#445679,.T.); +#445679 = EDGE_CURVE('',#445672,#445680,#445682,.T.); +#445680 = VERTEX_POINT('',#445681); +#445681 = CARTESIAN_POINT('',(121.753171,-76.49436,1.585)); +#445682 = LINE('',#445683,#445684); +#445683 = CARTESIAN_POINT('',(122.453171,-76.49436,1.585)); +#445684 = VECTOR('',#445685,1.); +#445685 = DIRECTION('',(-1.,0.,0.)); +#445686 = ORIENTED_EDGE('',*,*,#445687,.T.); +#445687 = EDGE_CURVE('',#445680,#445688,#445690,.T.); +#445688 = VERTEX_POINT('',#445689); +#445689 = CARTESIAN_POINT('',(121.753171,-76.626721,1.585)); +#445690 = LINE('',#445691,#445692); +#445691 = CARTESIAN_POINT('',(121.753171,-76.49436,1.585)); +#445692 = VECTOR('',#445693,1.); +#445693 = DIRECTION('',(0.,-1.,0.)); +#445694 = ORIENTED_EDGE('',*,*,#445695,.T.); +#445695 = EDGE_CURVE('',#445688,#445696,#445698,.T.); +#445696 = VERTEX_POINT('',#445697); +#445697 = CARTESIAN_POINT('',(121.784968,-76.722113,1.585)); +#445698 = LINE('',#445699,#445700); +#445699 = CARTESIAN_POINT('',(121.753171,-76.626721,1.585)); +#445700 = VECTOR('',#445701,1.); +#445701 = DIRECTION('',(0.316224782481,-0.948684292557,0.)); +#445702 = ORIENTED_EDGE('',*,*,#445703,.T.); +#445703 = EDGE_CURVE('',#445696,#445704,#445706,.T.); +#445704 = VERTEX_POINT('',#445705); +#445705 = CARTESIAN_POINT('',(121.847074,-76.784219,1.585)); +#445706 = LINE('',#445707,#445708); +#445707 = CARTESIAN_POINT('',(121.784968,-76.722113,1.585)); +#445708 = VECTOR('',#445709,1.); +#445709 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#445710 = ORIENTED_EDGE('',*,*,#445711,.T.); +#445711 = EDGE_CURVE('',#445704,#445712,#445714,.T.); +#445712 = VERTEX_POINT('',#445713); +#445713 = CARTESIAN_POINT('',(122.154159,-76.851503,1.585)); +#445714 = CIRCLE('',#445715,0.500385206209); +#445715 = AXIS2_PLACEMENT_3D('',#445716,#445717,#445718); +#445716 = CARTESIAN_POINT('',(122.10229191139,-76.3538131772,1.585)); +#445717 = DIRECTION('',(0.,0.,1.)); +#445718 = DIRECTION('',(-0.510042879426,-0.860148976135,0.)); +#445719 = ORIENTED_EDGE('',*,*,#445720,.T.); +#445720 = EDGE_CURVE('',#445712,#445721,#445723,.T.); +#445721 = VERTEX_POINT('',#445722); +#445722 = CARTESIAN_POINT('',(122.295245,-76.81623,1.585)); +#445723 = LINE('',#445724,#445725); +#445724 = CARTESIAN_POINT('',(122.154159,-76.851503,1.585)); +#445725 = VECTOR('',#445726,1.); +#445726 = DIRECTION('',(0.970140073191,0.242545332646,0.)); +#445727 = ORIENTED_EDGE('',*,*,#445728,.T.); +#445728 = EDGE_CURVE('',#445721,#445729,#445731,.T.); +#445729 = VERTEX_POINT('',#445730); +#445730 = CARTESIAN_POINT('',(122.359269,-76.784218,1.585)); +#445731 = LINE('',#445732,#445733); +#445732 = CARTESIAN_POINT('',(122.295245,-76.81623,1.585)); +#445733 = VECTOR('',#445734,1.); +#445734 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#445735 = ORIENTED_EDGE('',*,*,#445736,.T.); +#445736 = EDGE_CURVE('',#445729,#445737,#445739,.T.); +#445737 = VERTEX_POINT('',#445738); +#445738 = CARTESIAN_POINT('',(122.421374,-76.722113,1.585)); +#445739 = LINE('',#445740,#445741); +#445740 = CARTESIAN_POINT('',(122.359269,-76.784218,1.585)); +#445741 = VECTOR('',#445742,1.); +#445742 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#445743 = ORIENTED_EDGE('',*,*,#445744,.T.); +#445744 = EDGE_CURVE('',#445737,#445670,#445745,.T.); +#445745 = LINE('',#445746,#445747); +#445746 = CARTESIAN_POINT('',(122.421374,-76.722113,1.585)); +#445747 = VECTOR('',#445748,1.); +#445748 = DIRECTION('',(0.316230749606,0.948682303516,0.)); +#445749 = PLANE('',#445750); +#445750 = AXIS2_PLACEMENT_3D('',#445751,#445752,#445753); +#445751 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445752 = DIRECTION('',(0.,0.,1.)); +#445753 = DIRECTION('',(1.,0.,-0.)); +#445754 = SHELL_BASED_SURFACE_MODEL('',(#445755)); +#445755 = OPEN_SHELL('',(#445756)); +#445756 = ADVANCED_FACE('',(#445757,#445842),#445868,.T.); +#445757 = FACE_BOUND('',#445758,.F.); +#445758 = EDGE_LOOP('',(#445759,#445770,#445778,#445787,#445795,#445804, + #445812,#445820,#445828,#445836)); +#445759 = ORIENTED_EDGE('',*,*,#445760,.T.); +#445760 = EDGE_CURVE('',#445761,#445763,#445765,.T.); +#445761 = VERTEX_POINT('',#445762); +#445762 = CARTESIAN_POINT('',(124.229207,-76.257428,1.585)); +#445763 = VERTEX_POINT('',#445764); +#445764 = CARTESIAN_POINT('',(124.294892,-76.20645,1.585)); +#445765 = CIRCLE('',#445766,4.999967670833E-02); +#445766 = AXIS2_PLACEMENT_3D('',#445767,#445768,#445769); +#445767 = CARTESIAN_POINT('',(124.27908091302,-76.25388392456,1.585)); +#445768 = DIRECTION('',(0.,0.,-1.)); +#445769 = DIRECTION('',(-0.997484710033,-7.088196703007E-02,-0.)); +#445770 = ORIENTED_EDGE('',*,*,#445771,.T.); +#445771 = EDGE_CURVE('',#445763,#445772,#445774,.T.); +#445772 = VERTEX_POINT('',#445773); +#445773 = CARTESIAN_POINT('',(125.094892,-76.473117,1.585)); +#445774 = LINE('',#445775,#445776); +#445775 = CARTESIAN_POINT('',(124.294892,-76.20645,1.585)); +#445776 = VECTOR('',#445777,1.); +#445777 = DIRECTION('',(0.948683179465,-0.316228121773,0.)); +#445778 = ORIENTED_EDGE('',*,*,#445779,.T.); +#445779 = EDGE_CURVE('',#445772,#445780,#445782,.T.); +#445780 = VERTEX_POINT('',#445781); +#445781 = CARTESIAN_POINT('',(125.094893,-76.567985,1.585)); +#445782 = CIRCLE('',#445783,4.999994042739E-02); +#445783 = AXIS2_PLACEMENT_3D('',#445784,#445785,#445786); +#445784 = CARTESIAN_POINT('',(125.07908080538,-76.52055116667,1.585)); +#445785 = DIRECTION('',(0.,0.,-1.)); +#445786 = DIRECTION('',(0.316224268982,0.948684463722,0.)); +#445787 = ORIENTED_EDGE('',*,*,#445788,.T.); +#445788 = EDGE_CURVE('',#445780,#445789,#445791,.T.); +#445789 = VERTEX_POINT('',#445790); +#445790 = CARTESIAN_POINT('',(124.294892,-76.834651,1.585)); +#445791 = LINE('',#445792,#445793); +#445792 = CARTESIAN_POINT('',(125.094893,-76.567985,1.585)); +#445793 = VECTOR('',#445794,1.); +#445794 = DIRECTION('',(-0.948683653806,-0.316226698749,0.)); +#445795 = ORIENTED_EDGE('',*,*,#445796,.T.); +#445796 = EDGE_CURVE('',#445789,#445797,#445799,.T.); +#445797 = VERTEX_POINT('',#445798); +#445798 = CARTESIAN_POINT('',(124.26327,-76.739783,1.585)); +#445799 = CIRCLE('',#445800,4.99997207716E-02); +#445800 = AXIS2_PLACEMENT_3D('',#445801,#445802,#445803); +#445801 = CARTESIAN_POINT('',(124.27908053738,-76.7872171542,1.585)); +#445802 = DIRECTION('',(0.,0.,-1.)); +#445803 = DIRECTION('',(0.316231018311,-0.948682213946,0.)); +#445804 = ORIENTED_EDGE('',*,*,#445805,.T.); +#445805 = EDGE_CURVE('',#445797,#445806,#445808,.T.); +#445806 = VERTEX_POINT('',#445807); +#445807 = CARTESIAN_POINT('',(124.457653,-76.674988,1.585)); +#445808 = LINE('',#445809,#445810); +#445809 = CARTESIAN_POINT('',(124.26327,-76.739783,1.585)); +#445810 = VECTOR('',#445811,1.); +#445811 = DIRECTION('',(0.94868232195,0.316230694303,0.)); +#445812 = ORIENTED_EDGE('',*,*,#445813,.T.); +#445813 = EDGE_CURVE('',#445806,#445814,#445816,.T.); +#445814 = VERTEX_POINT('',#445815); +#445815 = CARTESIAN_POINT('',(124.457653,-76.366112,1.585)); +#445816 = LINE('',#445817,#445818); +#445817 = CARTESIAN_POINT('',(124.457653,-76.674988,1.585)); +#445818 = VECTOR('',#445819,1.); +#445819 = DIRECTION('',(0.,1.,0.)); +#445820 = ORIENTED_EDGE('',*,*,#445821,.T.); +#445821 = EDGE_CURVE('',#445814,#445822,#445824,.T.); +#445822 = VERTEX_POINT('',#445823); +#445823 = CARTESIAN_POINT('',(124.26327,-76.301318,1.585)); +#445824 = LINE('',#445825,#445826); +#445825 = CARTESIAN_POINT('',(124.457653,-76.366112,1.585)); +#445826 = VECTOR('',#445827,1.); +#445827 = DIRECTION('',(-0.948683786098,0.31622630187,0.)); +#445828 = ORIENTED_EDGE('',*,*,#445829,.T.); +#445829 = EDGE_CURVE('',#445822,#445830,#445832,.T.); +#445830 = VERTEX_POINT('',#445831); +#445831 = CARTESIAN_POINT('',(124.246321,-76.291657,1.585)); +#445832 = LINE('',#445833,#445834); +#445833 = CARTESIAN_POINT('',(124.26327,-76.301318,1.585)); +#445834 = VECTOR('',#445835,1.); +#445835 = DIRECTION('',(-0.868775726523,0.495205752193,0.)); +#445836 = ORIENTED_EDGE('',*,*,#445837,.T.); +#445837 = EDGE_CURVE('',#445830,#445761,#445838,.T.); +#445838 = LINE('',#445839,#445840); +#445839 = CARTESIAN_POINT('',(124.246321,-76.291657,1.585)); +#445840 = VECTOR('',#445841,1.); +#445841 = DIRECTION('',(-0.447203143135,0.894432417106,0.)); +#445842 = FACE_BOUND('',#445843,.F.); +#445843 = EDGE_LOOP('',(#445844,#445854,#445862)); +#445844 = ORIENTED_EDGE('',*,*,#445845,.T.); +#445845 = EDGE_CURVE('',#445846,#445848,#445850,.T.); +#445846 = VERTEX_POINT('',#445847); +#445847 = CARTESIAN_POINT('',(124.557653,-76.641655,1.585)); +#445848 = VERTEX_POINT('',#445849); +#445849 = CARTESIAN_POINT('',(124.920967,-76.520551,1.585)); +#445850 = LINE('',#445851,#445852); +#445851 = CARTESIAN_POINT('',(124.557653,-76.641655,1.585)); +#445852 = VECTOR('',#445853,1.); +#445853 = DIRECTION('',(0.948683820288,0.316226199299,0.)); +#445854 = ORIENTED_EDGE('',*,*,#445855,.T.); +#445855 = EDGE_CURVE('',#445848,#445856,#445858,.T.); +#445856 = VERTEX_POINT('',#445857); +#445857 = CARTESIAN_POINT('',(124.557653,-76.399445,1.585)); +#445858 = LINE('',#445859,#445860); +#445859 = CARTESIAN_POINT('',(124.920967,-76.520551,1.585)); +#445860 = VECTOR('',#445861,1.); +#445861 = DIRECTION('',(-0.948682253569,0.316230899444,0.)); +#445862 = ORIENTED_EDGE('',*,*,#445863,.T.); +#445863 = EDGE_CURVE('',#445856,#445846,#445864,.T.); +#445864 = LINE('',#445865,#445866); +#445865 = CARTESIAN_POINT('',(124.557653,-76.399445,1.585)); +#445866 = VECTOR('',#445867,1.); +#445867 = DIRECTION('',(0.,-1.,0.)); +#445868 = PLANE('',#445869); +#445869 = AXIS2_PLACEMENT_3D('',#445870,#445871,#445872); +#445870 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445871 = DIRECTION('',(0.,0.,1.)); +#445872 = DIRECTION('',(1.,0.,-0.)); +#445873 = SHELL_BASED_SURFACE_MODEL('',(#445874)); +#445874 = OPEN_SHELL('',(#445875)); +#445875 = ADVANCED_FACE('',(#445876),#445937,.T.); +#445876 = FACE_BOUND('',#445877,.F.); +#445877 = EDGE_LOOP('',(#445878,#445889,#445897,#445906,#445914,#445922, + #445931)); +#445878 = ORIENTED_EDGE('',*,*,#445879,.T.); +#445879 = EDGE_CURVE('',#445880,#445882,#445884,.T.); +#445880 = VERTEX_POINT('',#445881); +#445881 = CARTESIAN_POINT('',(125.517036,-76.36817,1.585)); +#445882 = VERTEX_POINT('',#445883); +#445883 = CARTESIAN_POINT('',(125.567036,-76.31817,1.585)); +#445884 = CIRCLE('',#445885,5.000014378934E-02); +#445885 = AXIS2_PLACEMENT_3D('',#445886,#445887,#445888); +#445886 = CARTESIAN_POINT('',(125.56703614378,-76.36817014378,1.585)); +#445887 = DIRECTION('',(0.,0.,-1.)); +#445888 = DIRECTION('',(-0.999999999996,2.875774186499E-06,0.)); +#445889 = ORIENTED_EDGE('',*,*,#445890,.T.); +#445890 = EDGE_CURVE('',#445882,#445891,#445893,.T.); +#445891 = VERTEX_POINT('',#445892); +#445892 = CARTESIAN_POINT('',(126.367036,-76.31817,1.585)); +#445893 = LINE('',#445894,#445895); +#445894 = CARTESIAN_POINT('',(125.567036,-76.31817,1.585)); +#445895 = VECTOR('',#445896,1.); +#445896 = DIRECTION('',(1.,0.,0.)); +#445897 = ORIENTED_EDGE('',*,*,#445898,.T.); +#445898 = EDGE_CURVE('',#445891,#445899,#445901,.T.); +#445899 = VERTEX_POINT('',#445900); +#445900 = CARTESIAN_POINT('',(126.367036,-76.41817,1.585)); +#445901 = CIRCLE('',#445902,5.000000000003E-02); +#445902 = AXIS2_PLACEMENT_3D('',#445903,#445904,#445905); +#445903 = CARTESIAN_POINT('',(126.36703595228,-76.36817,1.585)); +#445904 = DIRECTION('',(0.,0.,-1.)); +#445905 = DIRECTION('',(9.542367251921E-07,1.,0.)); +#445906 = ORIENTED_EDGE('',*,*,#445907,.T.); +#445907 = EDGE_CURVE('',#445899,#445908,#445910,.T.); +#445908 = VERTEX_POINT('',#445909); +#445909 = CARTESIAN_POINT('',(125.617036,-76.41817,1.585)); +#445910 = LINE('',#445911,#445912); +#445911 = CARTESIAN_POINT('',(126.367036,-76.41817,1.585)); +#445912 = VECTOR('',#445913,1.); +#445913 = DIRECTION('',(-1.,0.,0.)); +#445914 = ORIENTED_EDGE('',*,*,#445915,.T.); +#445915 = EDGE_CURVE('',#445908,#445916,#445918,.T.); +#445916 = VERTEX_POINT('',#445917); +#445917 = CARTESIAN_POINT('',(125.617036,-76.749122,1.585)); +#445918 = LINE('',#445919,#445920); +#445919 = CARTESIAN_POINT('',(125.617036,-76.41817,1.585)); +#445920 = VECTOR('',#445921,1.); +#445921 = DIRECTION('',(0.,-1.,0.)); +#445922 = ORIENTED_EDGE('',*,*,#445923,.T.); +#445923 = EDGE_CURVE('',#445916,#445924,#445926,.T.); +#445924 = VERTEX_POINT('',#445925); +#445925 = CARTESIAN_POINT('',(125.517036,-76.749122,1.585)); +#445926 = CIRCLE('',#445927,5.000000000002E-02); +#445927 = AXIS2_PLACEMENT_3D('',#445928,#445929,#445930); +#445928 = CARTESIAN_POINT('',(125.567036,-76.74912195228,1.585)); +#445929 = DIRECTION('',(-0.,0.,-1.)); +#445930 = DIRECTION('',(1.,-9.54236440975E-07,-0.)); +#445931 = ORIENTED_EDGE('',*,*,#445932,.T.); +#445932 = EDGE_CURVE('',#445924,#445880,#445933,.T.); +#445933 = LINE('',#445934,#445935); +#445934 = CARTESIAN_POINT('',(125.517036,-76.749122,1.585)); +#445935 = VECTOR('',#445936,1.); +#445936 = DIRECTION('',(0.,1.,0.)); +#445937 = PLANE('',#445938); +#445938 = AXIS2_PLACEMENT_3D('',#445939,#445940,#445941); +#445939 = CARTESIAN_POINT('',(0.,0.,1.585)); +#445940 = DIRECTION('',(0.,0.,1.)); +#445941 = DIRECTION('',(1.,0.,-0.)); +#445942 = SHELL_BASED_SURFACE_MODEL('',(#445943)); +#445943 = OPEN_SHELL('',(#445944)); +#445944 = ADVANCED_FACE('',(#445945),#446145,.T.); +#445945 = FACE_BOUND('',#445946,.F.); +#445946 = EDGE_LOOP('',(#445947,#445958,#445966,#445975,#445983,#445992, + #446000,#446009,#446017,#446025,#446033,#446041,#446049,#446057, + #446065,#446074,#446082,#446090,#446098,#446106,#446114,#446122, + #446130,#446139)); +#445947 = ORIENTED_EDGE('',*,*,#445948,.T.); +#445948 = EDGE_CURVE('',#445949,#445951,#445953,.T.); +#445949 = VERTEX_POINT('',#445950); +#445950 = CARTESIAN_POINT('',(122.984501,-76.619102,1.585)); +#445951 = VERTEX_POINT('',#445952); +#445952 = CARTESIAN_POINT('',(122.993867,-76.180433,1.585)); +#445953 = CIRCLE('',#445954,0.398411069451); +#445954 = AXIS2_PLACEMENT_3D('',#445955,#445956,#445957); +#445955 = CARTESIAN_POINT('',(123.32167675265,-76.40686653622,1.585)); +#445956 = DIRECTION('',(0.,0.,-1.)); +#445957 = DIRECTION('',(-0.846301166073,-0.532704736513,-0.)); +#445958 = ORIENTED_EDGE('',*,*,#445959,.T.); +#445959 = EDGE_CURVE('',#445951,#445960,#445962,.T.); +#445960 = VERTEX_POINT('',#445961); +#445961 = CARTESIAN_POINT('',(123.048182,-76.131499,1.585)); +#445962 = LINE('',#445963,#445964); +#445963 = CARTESIAN_POINT('',(122.993867,-76.180433,1.585)); +#445964 = VECTOR('',#445965,1.); +#445965 = DIRECTION('',(0.74295057302,0.669346282614,0.)); +#445966 = ORIENTED_EDGE('',*,*,#445967,.T.); +#445967 = EDGE_CURVE('',#445960,#445968,#445970,.T.); +#445968 = VERTEX_POINT('',#445969); +#445969 = CARTESIAN_POINT('',(123.113511,-76.196828,1.585)); +#445970 = CIRCLE('',#445971,5.000060920129E-02); +#445971 = AXIS2_PLACEMENT_3D('',#445972,#445973,#445974); +#445972 = CARTESIAN_POINT('',(123.0673165,-76.1776935,1.585)); +#445973 = DIRECTION('',(0.,0.,-1.)); +#445974 = DIRECTION('',(-0.382685337352,0.923878743438,0.)); +#445975 = ORIENTED_EDGE('',*,*,#445976,.T.); +#445976 = EDGE_CURVE('',#445968,#445977,#445979,.T.); +#445977 = VERTEX_POINT('',#445978); +#445978 = CARTESIAN_POINT('',(123.070314,-76.245405,1.585)); +#445979 = LINE('',#445980,#445981); +#445980 = CARTESIAN_POINT('',(123.113511,-76.196828,1.585)); +#445981 = VECTOR('',#445982,1.); +#445982 = DIRECTION('',(-0.664513733372,-0.747276052179,0.)); +#445983 = ORIENTED_EDGE('',*,*,#445984,.T.); +#445984 = EDGE_CURVE('',#445977,#445985,#445987,.T.); +#445985 = VERTEX_POINT('',#445986); +#445986 = CARTESIAN_POINT('',(123.070314,-76.567123,1.585)); +#445987 = CIRCLE('',#445988,0.296231214028); +#445988 = AXIS2_PLACEMENT_3D('',#445989,#445990,#445991); +#445989 = CARTESIAN_POINT('',(123.31906551111,-76.406264,1.585)); +#445990 = DIRECTION('',(0.,0.,1.)); +#445991 = DIRECTION('',(-0.839720796926,0.543018400434,0.)); +#445992 = ORIENTED_EDGE('',*,*,#445993,.T.); +#445993 = EDGE_CURVE('',#445985,#445994,#445996,.T.); +#445994 = VERTEX_POINT('',#445995); +#445995 = CARTESIAN_POINT('',(123.096935,-76.593743,1.585)); +#445996 = LINE('',#445997,#445998); +#445997 = CARTESIAN_POINT('',(123.070314,-76.567123,1.585)); +#445998 = VECTOR('',#445999,1.); +#445999 = DIRECTION('',(0.707120062307,-0.707093499817,0.)); +#446000 = ORIENTED_EDGE('',*,*,#446001,.T.); +#446001 = EDGE_CURVE('',#445994,#446002,#446004,.T.); +#446002 = VERTEX_POINT('',#446003); +#446003 = CARTESIAN_POINT('',(123.380557,-76.593742,1.585)); +#446004 = CIRCLE('',#446005,0.253934212109); +#446005 = AXIS2_PLACEMENT_3D('',#446006,#446007,#446008); +#446006 = CARTESIAN_POINT('',(123.23874525729,-76.38309534393,1.585)); +#446007 = DIRECTION('',(0.,0.,1.)); +#446008 = DIRECTION('',(-0.55845274301,-0.829536336651,0.)); +#446009 = ORIENTED_EDGE('',*,*,#446010,.T.); +#446010 = EDGE_CURVE('',#446002,#446011,#446013,.T.); +#446011 = VERTEX_POINT('',#446012); +#446012 = CARTESIAN_POINT('',(123.407177,-76.567121,1.585)); +#446013 = LINE('',#446014,#446015); +#446014 = CARTESIAN_POINT('',(123.380557,-76.593742,1.585)); +#446015 = VECTOR('',#446016,1.); +#446016 = DIRECTION('',(0.707093499817,0.707120062307,0.)); +#446017 = ORIENTED_EDGE('',*,*,#446018,.T.); +#446018 = EDGE_CURVE('',#446011,#446019,#446021,.T.); +#446019 = VERTEX_POINT('',#446020); +#446020 = CARTESIAN_POINT('',(123.436364,-76.508747,1.585)); +#446021 = LINE('',#446022,#446023); +#446022 = CARTESIAN_POINT('',(123.407177,-76.567121,1.585)); +#446023 = VECTOR('',#446024,1.); +#446024 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#446025 = ORIENTED_EDGE('',*,*,#446026,.T.); +#446026 = EDGE_CURVE('',#446019,#446027,#446029,.T.); +#446027 = VERTEX_POINT('',#446028); +#446028 = CARTESIAN_POINT('',(123.439712,-76.389431,1.585)); +#446029 = LINE('',#446030,#446031); +#446030 = CARTESIAN_POINT('',(123.436364,-76.508747,1.585)); +#446031 = VECTOR('',#446032,1.); +#446032 = DIRECTION('',(2.80489015441E-02,0.99960655216,0.)); +#446033 = ORIENTED_EDGE('',*,*,#446034,.T.); +#446034 = EDGE_CURVE('',#446027,#446035,#446037,.T.); +#446035 = VERTEX_POINT('',#446036); +#446036 = CARTESIAN_POINT('',(123.46723,-76.360071,1.585)); +#446037 = LINE('',#446038,#446039); +#446038 = CARTESIAN_POINT('',(123.439712,-76.389431,1.585)); +#446039 = VECTOR('',#446040,1.); +#446040 = DIRECTION('',(0.683848539364,0.729623995774,0.)); +#446041 = ORIENTED_EDGE('',*,*,#446042,.T.); +#446042 = EDGE_CURVE('',#446035,#446043,#446045,.T.); +#446043 = VERTEX_POINT('',#446044); +#446044 = CARTESIAN_POINT('',(123.506968,-76.361541,1.585)); +#446045 = LINE('',#446046,#446047); +#446046 = CARTESIAN_POINT('',(123.46723,-76.360071,1.585)); +#446047 = VECTOR('',#446048,1.); +#446048 = DIRECTION('',(0.999316486312,-3.696701481898E-02,0.)); +#446049 = ORIENTED_EDGE('',*,*,#446050,.T.); +#446050 = EDGE_CURVE('',#446043,#446051,#446053,.T.); +#446051 = VERTEX_POINT('',#446052); +#446052 = CARTESIAN_POINT('',(123.741126,-76.562742,1.585)); +#446053 = LINE('',#446054,#446055); +#446054 = CARTESIAN_POINT('',(123.506968,-76.361541,1.585)); +#446055 = VECTOR('',#446056,1.); +#446056 = DIRECTION('',(0.758465163657,-0.65171358396,0.)); +#446057 = ORIENTED_EDGE('',*,*,#446058,.T.); +#446058 = EDGE_CURVE('',#446051,#446059,#446061,.T.); +#446059 = VERTEX_POINT('',#446060); +#446060 = CARTESIAN_POINT('',(123.741126,-76.177693,1.585)); +#446061 = LINE('',#446062,#446063); +#446062 = CARTESIAN_POINT('',(123.741126,-76.562742,1.585)); +#446063 = VECTOR('',#446064,1.); +#446064 = DIRECTION('',(0.,1.,0.)); +#446065 = ORIENTED_EDGE('',*,*,#446066,.T.); +#446066 = EDGE_CURVE('',#446059,#446067,#446069,.T.); +#446067 = VERTEX_POINT('',#446068); +#446068 = CARTESIAN_POINT('',(123.841126,-76.177693,1.585)); +#446069 = CIRCLE('',#446070,5.000000000002E-02); +#446070 = AXIS2_PLACEMENT_3D('',#446071,#446072,#446073); +#446071 = CARTESIAN_POINT('',(123.791126,-76.17769304771,1.585)); +#446072 = DIRECTION('',(0.,0.,-1.)); +#446073 = DIRECTION('',(-1.,9.54236440975E-07,0.)); +#446074 = ORIENTED_EDGE('',*,*,#446075,.T.); +#446075 = EDGE_CURVE('',#446067,#446076,#446078,.T.); +#446076 = VERTEX_POINT('',#446077); +#446077 = CARTESIAN_POINT('',(123.838491,-76.68895,1.585)); +#446078 = LINE('',#446079,#446080); +#446079 = CARTESIAN_POINT('',(123.841126,-76.177693,1.585)); +#446080 = VECTOR('',#446081,1.); +#446081 = DIRECTION('',(-5.153895210223E-03,-0.999986718594,0.)); +#446082 = ORIENTED_EDGE('',*,*,#446083,.T.); +#446083 = EDGE_CURVE('',#446076,#446084,#446086,.T.); +#446084 = VERTEX_POINT('',#446085); +#446085 = CARTESIAN_POINT('',(123.81026,-76.719125,1.585)); +#446086 = LINE('',#446087,#446088); +#446087 = CARTESIAN_POINT('',(123.838491,-76.68895,1.585)); +#446088 = VECTOR('',#446089,1.); +#446089 = DIRECTION('',(-0.683192931206,-0.730237919278,0.)); +#446090 = ORIENTED_EDGE('',*,*,#446091,.T.); +#446091 = EDGE_CURVE('',#446084,#446092,#446094,.T.); +#446092 = VERTEX_POINT('',#446093); +#446093 = CARTESIAN_POINT('',(123.770523,-76.717656,1.585)); +#446094 = LINE('',#446095,#446096); +#446095 = CARTESIAN_POINT('',(123.81026,-76.719125,1.585)); +#446096 = VECTOR('',#446097,1.); +#446097 = DIRECTION('',(-0.999317380674,3.694282991194E-02,0.)); +#446098 = ORIENTED_EDGE('',*,*,#446099,.T.); +#446099 = EDGE_CURVE('',#446092,#446100,#446102,.T.); +#446100 = VERTEX_POINT('',#446101); +#446101 = CARTESIAN_POINT('',(123.536364,-76.516453,1.585)); +#446102 = LINE('',#446103,#446104); +#446103 = CARTESIAN_POINT('',(123.770523,-76.717656,1.585)); +#446104 = VECTOR('',#446105,1.); +#446105 = DIRECTION('',(-0.758463337214,0.651715709571,0.)); +#446106 = ORIENTED_EDGE('',*,*,#446107,.T.); +#446107 = EDGE_CURVE('',#446100,#446108,#446110,.T.); +#446108 = VERTEX_POINT('',#446109); +#446109 = CARTESIAN_POINT('',(123.531086,-76.54291,1.585)); +#446110 = LINE('',#446111,#446112); +#446111 = CARTESIAN_POINT('',(123.536364,-76.516453,1.585)); +#446112 = VECTOR('',#446113,1.); +#446113 = DIRECTION('',(-0.195638520537,-0.980676077654,0.)); +#446114 = ORIENTED_EDGE('',*,*,#446115,.T.); +#446115 = EDGE_CURVE('',#446108,#446116,#446118,.T.); +#446116 = VERTEX_POINT('',#446117); +#446117 = CARTESIAN_POINT('',(123.483624,-76.632097,1.585)); +#446118 = LINE('',#446119,#446120); +#446119 = CARTESIAN_POINT('',(123.531086,-76.54291,1.585)); +#446120 = VECTOR('',#446121,1.); +#446121 = DIRECTION('',(-0.469783519548,-0.882781651804,0.)); +#446122 = ORIENTED_EDGE('',*,*,#446123,.T.); +#446123 = EDGE_CURVE('',#446116,#446124,#446126,.T.); +#446124 = VERTEX_POINT('',#446125); +#446125 = CARTESIAN_POINT('',(123.432535,-76.679557,1.585)); +#446126 = LINE('',#446127,#446128); +#446127 = CARTESIAN_POINT('',(123.483624,-76.632097,1.585)); +#446128 = VECTOR('',#446129,1.); +#446129 = DIRECTION('',(-0.732648929305,-0.680606748709,0.)); +#446130 = ORIENTED_EDGE('',*,*,#446131,.T.); +#446131 = EDGE_CURVE('',#446124,#446132,#446134,.T.); +#446132 = VERTEX_POINT('',#446133); +#446133 = CARTESIAN_POINT('',(123.031961,-76.670191,1.585)); +#446134 = CIRCLE('',#446135,0.354713007527); +#446135 = AXIS2_PLACEMENT_3D('',#446136,#446137,#446138); +#446136 = CARTESIAN_POINT('',(123.23909032756,-76.38223482387,1.585)); +#446137 = DIRECTION('',(-0.,0.,-1.)); +#446138 = DIRECTION('',(0.545355451664,-0.838204886254,-0.)); +#446139 = ORIENTED_EDGE('',*,*,#446140,.T.); +#446140 = EDGE_CURVE('',#446132,#445949,#446141,.T.); +#446141 = LINE('',#446142,#446143); +#446142 = CARTESIAN_POINT('',(123.031961,-76.670191,1.585)); +#446143 = VECTOR('',#446144,1.); +#446144 = DIRECTION('',(-0.680606748709,0.732648929305,0.)); +#446145 = PLANE('',#446146); +#446146 = AXIS2_PLACEMENT_3D('',#446147,#446148,#446149); +#446147 = CARTESIAN_POINT('',(0.,0.,1.585)); +#446148 = DIRECTION('',(0.,0.,1.)); +#446149 = DIRECTION('',(1.,0.,-0.)); +#446150 = SHELL_BASED_SURFACE_MODEL('',(#446151)); +#446151 = OPEN_SHELL('',(#446152)); +#446152 = ADVANCED_FACE('',(#446153),#446239,.T.); +#446153 = FACE_BOUND('',#446154,.F.); +#446154 = EDGE_LOOP('',(#446155,#446166,#446174,#446183,#446191,#446199, + #446208,#446216,#446225,#446233)); +#446155 = ORIENTED_EDGE('',*,*,#446156,.T.); +#446156 = EDGE_CURVE('',#446157,#446159,#446161,.T.); +#446157 = VERTEX_POINT('',#446158); +#446158 = CARTESIAN_POINT('',(121.703171,-75.656265,1.585)); +#446159 = VERTEX_POINT('',#446160); +#446160 = CARTESIAN_POINT('',(121.703171,-75.556265,1.585)); +#446161 = CIRCLE('',#446162,5.000000000002E-02); +#446162 = AXIS2_PLACEMENT_3D('',#446163,#446164,#446165); +#446163 = CARTESIAN_POINT('',(121.70317104771,-75.606265,1.585)); +#446164 = DIRECTION('',(0.,0.,-1.)); +#446165 = DIRECTION('',(-9.54236440975E-07,-1.,-0.)); +#446166 = ORIENTED_EDGE('',*,*,#446167,.T.); +#446167 = EDGE_CURVE('',#446159,#446168,#446170,.T.); +#446168 = VERTEX_POINT('',#446169); +#446169 = CARTESIAN_POINT('',(122.503171,-75.556265,1.585)); +#446170 = LINE('',#446171,#446172); +#446171 = CARTESIAN_POINT('',(121.703171,-75.556265,1.585)); +#446172 = VECTOR('',#446173,1.); +#446173 = DIRECTION('',(1.,0.,0.)); +#446174 = ORIENTED_EDGE('',*,*,#446175,.T.); +#446175 = EDGE_CURVE('',#446168,#446176,#446178,.T.); +#446176 = VERTEX_POINT('',#446177); +#446177 = CARTESIAN_POINT('',(122.527978,-75.649677,1.585)); +#446178 = CIRCLE('',#446179,4.99999437778E-02); +#446179 = AXIS2_PLACEMENT_3D('',#446180,#446181,#446182); +#446180 = CARTESIAN_POINT('',(122.50317098985,-75.60626494377,1.585)); +#446181 = DIRECTION('',(0.,0.,-1.)); +#446182 = DIRECTION('',(2.029036644288E-07,1.,0.)); +#446183 = ORIENTED_EDGE('',*,*,#446184,.T.); +#446184 = EDGE_CURVE('',#446176,#446185,#446187,.T.); +#446185 = VERTEX_POINT('',#446186); +#446186 = CARTESIAN_POINT('',(121.891449,-76.013408,1.585)); +#446187 = LINE('',#446188,#446189); +#446188 = CARTESIAN_POINT('',(122.527978,-75.649677,1.585)); +#446189 = VECTOR('',#446190,1.); +#446190 = DIRECTION('',(-0.868243058184,-0.496139085252,0.)); +#446191 = ORIENTED_EDGE('',*,*,#446192,.T.); +#446192 = EDGE_CURVE('',#446185,#446193,#446195,.T.); +#446193 = VERTEX_POINT('',#446194); +#446194 = CARTESIAN_POINT('',(122.503171,-76.013408,1.585)); +#446195 = LINE('',#446196,#446197); +#446196 = CARTESIAN_POINT('',(121.891449,-76.013408,1.585)); +#446197 = VECTOR('',#446198,1.); +#446198 = DIRECTION('',(1.,0.,0.)); +#446199 = ORIENTED_EDGE('',*,*,#446200,.T.); +#446200 = EDGE_CURVE('',#446193,#446201,#446203,.T.); +#446201 = VERTEX_POINT('',#446202); +#446202 = CARTESIAN_POINT('',(122.503171,-76.113408,1.585)); +#446203 = CIRCLE('',#446204,5.000000000003E-02); +#446204 = AXIS2_PLACEMENT_3D('',#446205,#446206,#446207); +#446205 = CARTESIAN_POINT('',(122.50317095228,-76.063408,1.585)); +#446206 = DIRECTION('',(0.,0.,-1.)); +#446207 = DIRECTION('',(9.542367251918E-07,1.,0.)); +#446208 = ORIENTED_EDGE('',*,*,#446209,.T.); +#446209 = EDGE_CURVE('',#446201,#446210,#446212,.T.); +#446210 = VERTEX_POINT('',#446211); +#446211 = CARTESIAN_POINT('',(121.703171,-76.113408,1.585)); +#446212 = LINE('',#446213,#446214); +#446213 = CARTESIAN_POINT('',(122.503171,-76.113408,1.585)); +#446214 = VECTOR('',#446215,1.); +#446215 = DIRECTION('',(-1.,0.,0.)); +#446216 = ORIENTED_EDGE('',*,*,#446217,.T.); +#446217 = EDGE_CURVE('',#446210,#446218,#446220,.T.); +#446218 = VERTEX_POINT('',#446219); +#446219 = CARTESIAN_POINT('',(121.678364,-76.019996,1.585)); +#446220 = CIRCLE('',#446221,4.999994377778E-02); +#446221 = AXIS2_PLACEMENT_3D('',#446222,#446223,#446224); +#446222 = CARTESIAN_POINT('',(121.70317101014,-76.06340805622,1.585)); +#446223 = DIRECTION('',(0.,0.,-1.)); +#446224 = DIRECTION('',(-2.029030959939E-07,-1.,-0.)); +#446225 = ORIENTED_EDGE('',*,*,#446226,.T.); +#446226 = EDGE_CURVE('',#446218,#446227,#446229,.T.); +#446227 = VERTEX_POINT('',#446228); +#446228 = CARTESIAN_POINT('',(122.314893,-75.656265,1.585)); +#446229 = LINE('',#446230,#446231); +#446230 = CARTESIAN_POINT('',(121.678364,-76.019996,1.585)); +#446231 = VECTOR('',#446232,1.); +#446232 = DIRECTION('',(0.868243058184,0.496139085252,0.)); +#446233 = ORIENTED_EDGE('',*,*,#446234,.T.); +#446234 = EDGE_CURVE('',#446227,#446157,#446235,.T.); +#446235 = LINE('',#446236,#446237); +#446236 = CARTESIAN_POINT('',(122.314893,-75.656265,1.585)); +#446237 = VECTOR('',#446238,1.); +#446238 = DIRECTION('',(-1.,0.,0.)); +#446239 = PLANE('',#446240); +#446240 = AXIS2_PLACEMENT_3D('',#446241,#446242,#446243); +#446241 = CARTESIAN_POINT('',(0.,0.,1.585)); +#446242 = DIRECTION('',(0.,0.,1.)); +#446243 = DIRECTION('',(1.,0.,-0.)); +#446244 = SHELL_BASED_SURFACE_MODEL('',(#446245)); +#446245 = OPEN_SHELL('',(#446246)); +#446246 = ADVANCED_FACE('',(#446247,#446363),#446446,.T.); +#446247 = FACE_BOUND('',#446248,.F.); +#446248 = EDGE_LOOP('',(#446249,#446260,#446268,#446277,#446285,#446293, + #446301,#446309,#446317,#446325,#446333,#446341,#446349,#446357)); +#446249 = ORIENTED_EDGE('',*,*,#446250,.T.); +#446250 = EDGE_CURVE('',#446251,#446253,#446255,.T.); +#446251 = VERTEX_POINT('',#446252); +#446252 = CARTESIAN_POINT('',(124.229081,-75.56817,1.585)); +#446253 = VERTEX_POINT('',#446254); +#446254 = CARTESIAN_POINT('',(124.279081,-75.51817,1.585)); +#446255 = CIRCLE('',#446256,5.00001437894E-02); +#446256 = AXIS2_PLACEMENT_3D('',#446257,#446258,#446259); +#446257 = CARTESIAN_POINT('',(124.27908114378,-75.56817014378,1.585)); +#446258 = DIRECTION('',(0.,0.,-1.)); +#446259 = DIRECTION('',(-0.999999999996,2.875775607577E-06,0.)); +#446260 = ORIENTED_EDGE('',*,*,#446261,.T.); +#446261 = EDGE_CURVE('',#446253,#446262,#446264,.T.); +#446262 = VERTEX_POINT('',#446263); +#446263 = CARTESIAN_POINT('',(125.079081,-75.51817,1.585)); +#446264 = LINE('',#446265,#446266); +#446265 = CARTESIAN_POINT('',(124.279081,-75.51817,1.585)); +#446266 = VECTOR('',#446267,1.); +#446267 = DIRECTION('',(1.,0.,0.)); +#446268 = ORIENTED_EDGE('',*,*,#446269,.T.); +#446269 = EDGE_CURVE('',#446262,#446270,#446272,.T.); +#446270 = VERTEX_POINT('',#446271); +#446271 = CARTESIAN_POINT('',(125.129081,-75.56817,1.585)); +#446272 = CIRCLE('',#446273,5.000014378935E-02); +#446273 = AXIS2_PLACEMENT_3D('',#446274,#446275,#446276); +#446274 = CARTESIAN_POINT('',(125.07908085621,-75.56817014378,1.585)); +#446275 = DIRECTION('',(0.,0.,-1.)); +#446276 = DIRECTION('',(2.875774470715E-06,0.999999999996,0.)); +#446277 = ORIENTED_EDGE('',*,*,#446278,.T.); +#446278 = EDGE_CURVE('',#446270,#446279,#446281,.T.); +#446279 = VERTEX_POINT('',#446280); +#446280 = CARTESIAN_POINT('',(125.126515,-75.774457,1.585)); +#446281 = LINE('',#446282,#446283); +#446282 = CARTESIAN_POINT('',(125.129081,-75.56817,1.585)); +#446283 = VECTOR('',#446284,1.); +#446284 = DIRECTION('',(-1.243801842435E-02,-0.999922644857,0.)); +#446285 = ORIENTED_EDGE('',*,*,#446286,.T.); +#446286 = EDGE_CURVE('',#446279,#446287,#446289,.T.); +#446287 = VERTEX_POINT('',#446288); +#446288 = CARTESIAN_POINT('',(125.082729,-75.898726,1.585)); +#446289 = LINE('',#446290,#446291); +#446290 = CARTESIAN_POINT('',(125.126515,-75.774457,1.585)); +#446291 = VECTOR('',#446292,1.); +#446292 = DIRECTION('',(-0.332323027254,-0.94316562997,0.)); +#446293 = ORIENTED_EDGE('',*,*,#446294,.T.); +#446294 = EDGE_CURVE('',#446287,#446295,#446297,.T.); +#446295 = VERTEX_POINT('',#446296); +#446296 = CARTESIAN_POINT('',(124.987157,-75.993843,1.585)); +#446297 = LINE('',#446298,#446299); +#446298 = CARTESIAN_POINT('',(125.082729,-75.898726,1.585)); +#446299 = VECTOR('',#446300,1.); +#446300 = DIRECTION('',(-0.708791979753,-0.705417556797,0.)); +#446301 = ORIENTED_EDGE('',*,*,#446302,.T.); +#446302 = EDGE_CURVE('',#446295,#446303,#446305,.T.); +#446303 = VERTEX_POINT('',#446304); +#446304 = CARTESIAN_POINT('',(124.900732,-76.035724,1.585)); +#446305 = LINE('',#446306,#446307); +#446306 = CARTESIAN_POINT('',(124.987157,-75.993843,1.585)); +#446307 = VECTOR('',#446308,1.); +#446308 = DIRECTION('',(-0.899904139117,-0.436087766854,0.)); +#446309 = ORIENTED_EDGE('',*,*,#446310,.T.); +#446310 = EDGE_CURVE('',#446303,#446311,#446313,.T.); +#446311 = VERTEX_POINT('',#446312); +#446312 = CARTESIAN_POINT('',(124.736224,-76.075313,1.585)); +#446313 = LINE('',#446314,#446315); +#446314 = CARTESIAN_POINT('',(124.900732,-76.035724,1.585)); +#446315 = VECTOR('',#446316,1.); +#446316 = DIRECTION('',(-0.97224350737,-0.233971285368,0.)); +#446317 = ORIENTED_EDGE('',*,*,#446318,.T.); +#446318 = EDGE_CURVE('',#446311,#446319,#446321,.T.); +#446319 = VERTEX_POINT('',#446320); +#446320 = CARTESIAN_POINT('',(124.609811,-76.07382,1.585)); +#446321 = LINE('',#446322,#446323); +#446322 = CARTESIAN_POINT('',(124.736224,-76.075313,1.585)); +#446323 = VECTOR('',#446324,1.); +#446324 = DIRECTION('',(-0.999930263409,1.180967055023E-02,0.)); +#446325 = ORIENTED_EDGE('',*,*,#446326,.T.); +#446326 = EDGE_CURVE('',#446319,#446327,#446329,.T.); +#446327 = VERTEX_POINT('',#446328); +#446328 = CARTESIAN_POINT('',(124.447196,-76.031938,1.585)); +#446329 = LINE('',#446330,#446331); +#446330 = CARTESIAN_POINT('',(124.609811,-76.07382,1.585)); +#446331 = VECTOR('',#446332,1.); +#446332 = DIRECTION('',(-0.96839703585,0.249413674357,0.)); +#446333 = ORIENTED_EDGE('',*,*,#446334,.T.); +#446334 = EDGE_CURVE('',#446327,#446335,#446337,.T.); +#446335 = VERTEX_POINT('',#446336); +#446336 = CARTESIAN_POINT('',(124.358012,-75.984477,1.585)); +#446337 = LINE('',#446338,#446339); +#446338 = CARTESIAN_POINT('',(124.447196,-76.031938,1.585)); +#446339 = VECTOR('',#446340,1.); +#446340 = DIRECTION('',(-0.88277920319,0.469788120768,0.)); +#446341 = ORIENTED_EDGE('',*,*,#446342,.T.); +#446342 = EDGE_CURVE('',#446335,#446343,#446345,.T.); +#446343 = VERTEX_POINT('',#446344); +#446344 = CARTESIAN_POINT('',(124.275433,-75.898726,1.585)); +#446345 = LINE('',#446346,#446347); +#446346 = CARTESIAN_POINT('',(124.358012,-75.984477,1.585)); +#446347 = VECTOR('',#446348,1.); +#446348 = DIRECTION('',(-0.693658959064,0.720303580798,0.)); +#446349 = ORIENTED_EDGE('',*,*,#446350,.T.); +#446350 = EDGE_CURVE('',#446343,#446351,#446353,.T.); +#446351 = VERTEX_POINT('',#446352); +#446352 = CARTESIAN_POINT('',(124.229081,-75.758646,1.585)); +#446353 = LINE('',#446354,#446355); +#446354 = CARTESIAN_POINT('',(124.275433,-75.898726,1.585)); +#446355 = VECTOR('',#446356,1.); +#446356 = DIRECTION('',(-0.314144994158,0.949375016864,0.)); +#446357 = ORIENTED_EDGE('',*,*,#446358,.T.); +#446358 = EDGE_CURVE('',#446351,#446251,#446359,.T.); +#446359 = LINE('',#446360,#446361); +#446360 = CARTESIAN_POINT('',(124.229081,-75.758646,1.585)); +#446361 = VECTOR('',#446362,1.); +#446362 = DIRECTION('',(0.,1.,0.)); +#446363 = FACE_BOUND('',#446364,.F.); +#446364 = EDGE_LOOP('',(#446365,#446375,#446383,#446391,#446399,#446407, + #446416,#446424,#446432,#446440)); +#446365 = ORIENTED_EDGE('',*,*,#446366,.T.); +#446366 = EDGE_CURVE('',#446367,#446369,#446371,.T.); +#446367 = VERTEX_POINT('',#446368); +#446368 = CARTESIAN_POINT('',(125.029081,-75.750533,1.585)); +#446369 = VERTEX_POINT('',#446370); +#446370 = CARTESIAN_POINT('',(125.029081,-75.61817,1.585)); +#446371 = LINE('',#446372,#446373); +#446372 = CARTESIAN_POINT('',(125.029081,-75.750533,1.585)); +#446373 = VECTOR('',#446374,1.); +#446374 = DIRECTION('',(0.,1.,0.)); +#446375 = ORIENTED_EDGE('',*,*,#446376,.T.); +#446376 = EDGE_CURVE('',#446369,#446377,#446379,.T.); +#446377 = VERTEX_POINT('',#446378); +#446378 = CARTESIAN_POINT('',(124.329081,-75.61817,1.585)); +#446379 = LINE('',#446380,#446381); +#446380 = CARTESIAN_POINT('',(125.029081,-75.61817,1.585)); +#446381 = VECTOR('',#446382,1.); +#446382 = DIRECTION('',(-1.,0.,0.)); +#446383 = ORIENTED_EDGE('',*,*,#446384,.T.); +#446384 = EDGE_CURVE('',#446377,#446385,#446387,.T.); +#446385 = VERTEX_POINT('',#446386); +#446386 = CARTESIAN_POINT('',(124.329081,-75.750531,1.585)); +#446387 = LINE('',#446388,#446389); +#446388 = CARTESIAN_POINT('',(124.329081,-75.61817,1.585)); +#446389 = VECTOR('',#446390,1.); +#446390 = DIRECTION('',(0.,-1.,0.)); +#446391 = ORIENTED_EDGE('',*,*,#446392,.T.); +#446392 = EDGE_CURVE('',#446385,#446393,#446395,.T.); +#446393 = VERTEX_POINT('',#446394); +#446394 = CARTESIAN_POINT('',(124.360878,-75.845923,1.585)); +#446395 = LINE('',#446396,#446397); +#446396 = CARTESIAN_POINT('',(124.329081,-75.750531,1.585)); +#446397 = VECTOR('',#446398,1.); +#446398 = DIRECTION('',(0.316224782481,-0.948684292557,0.)); +#446399 = ORIENTED_EDGE('',*,*,#446400,.T.); +#446400 = EDGE_CURVE('',#446393,#446401,#446403,.T.); +#446401 = VERTEX_POINT('',#446402); +#446402 = CARTESIAN_POINT('',(124.422984,-75.908029,1.585)); +#446403 = LINE('',#446404,#446405); +#446404 = CARTESIAN_POINT('',(124.360878,-75.845923,1.585)); +#446405 = VECTOR('',#446406,1.); +#446406 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#446407 = ORIENTED_EDGE('',*,*,#446408,.T.); +#446408 = EDGE_CURVE('',#446401,#446409,#446411,.T.); +#446409 = VERTEX_POINT('',#446410); +#446410 = CARTESIAN_POINT('',(124.730069,-75.975313,1.585)); +#446411 = CIRCLE('',#446412,0.50038520621); +#446412 = AXIS2_PLACEMENT_3D('',#446413,#446414,#446415); +#446413 = CARTESIAN_POINT('',(124.67820191139,-75.4776231772,1.585)); +#446414 = DIRECTION('',(0.,0.,1.)); +#446415 = DIRECTION('',(-0.510042879426,-0.860148976136,0.)); +#446416 = ORIENTED_EDGE('',*,*,#446417,.T.); +#446417 = EDGE_CURVE('',#446409,#446418,#446420,.T.); +#446418 = VERTEX_POINT('',#446419); +#446419 = CARTESIAN_POINT('',(124.871155,-75.94004,1.585)); +#446420 = LINE('',#446421,#446422); +#446421 = CARTESIAN_POINT('',(124.730069,-75.975313,1.585)); +#446422 = VECTOR('',#446423,1.); +#446423 = DIRECTION('',(0.970140073191,0.242545332646,0.)); +#446424 = ORIENTED_EDGE('',*,*,#446425,.T.); +#446425 = EDGE_CURVE('',#446418,#446426,#446428,.T.); +#446426 = VERTEX_POINT('',#446427); +#446427 = CARTESIAN_POINT('',(124.935179,-75.908028,1.585)); +#446428 = LINE('',#446429,#446430); +#446429 = CARTESIAN_POINT('',(124.871155,-75.94004,1.585)); +#446430 = VECTOR('',#446431,1.); +#446431 = DIRECTION('',(0.894427191,0.4472135955,0.)); +#446432 = ORIENTED_EDGE('',*,*,#446433,.T.); +#446433 = EDGE_CURVE('',#446426,#446434,#446436,.T.); +#446434 = VERTEX_POINT('',#446435); +#446435 = CARTESIAN_POINT('',(124.997284,-75.845923,1.585)); +#446436 = LINE('',#446437,#446438); +#446437 = CARTESIAN_POINT('',(124.935179,-75.908028,1.585)); +#446438 = VECTOR('',#446439,1.); +#446439 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#446440 = ORIENTED_EDGE('',*,*,#446441,.T.); +#446441 = EDGE_CURVE('',#446434,#446367,#446442,.T.); +#446442 = LINE('',#446443,#446444); +#446443 = CARTESIAN_POINT('',(124.997284,-75.845923,1.585)); +#446444 = VECTOR('',#446445,1.); +#446445 = DIRECTION('',(0.316230749606,0.948682303516,0.)); +#446446 = PLANE('',#446447); +#446447 = AXIS2_PLACEMENT_3D('',#446448,#446449,#446450); +#446448 = CARTESIAN_POINT('',(0.,0.,1.585)); +#446449 = DIRECTION('',(0.,0.,1.)); +#446450 = DIRECTION('',(1.,0.,-0.)); +#446451 = SHELL_BASED_SURFACE_MODEL('',(#446452)); +#446452 = OPEN_SHELL('',(#446453)); +#446453 = ADVANCED_FACE('',(#446454),#446677,.T.); +#446454 = FACE_BOUND('',#446455,.F.); +#446455 = EDGE_LOOP('',(#446456,#446466,#446474,#446482,#446490,#446498, + #446506,#446514,#446522,#446530,#446538,#446547,#446555,#446564, + #446572,#446581,#446589,#446597,#446605,#446614,#446622,#446631, + #446639,#446647,#446655,#446663,#446671)); +#446456 = ORIENTED_EDGE('',*,*,#446457,.T.); +#446457 = EDGE_CURVE('',#446458,#446460,#446462,.T.); +#446458 = VERTEX_POINT('',#446459); +#446459 = CARTESIAN_POINT('',(125.658961,-75.561544,1.585)); +#446460 = VERTEX_POINT('',#446461); +#446461 = CARTESIAN_POINT('',(125.745385,-75.519663,1.585)); +#446462 = LINE('',#446463,#446464); +#446463 = CARTESIAN_POINT('',(125.658961,-75.561544,1.585)); +#446464 = VECTOR('',#446465,1.); +#446465 = DIRECTION('',(0.899902158909,0.436091853158,0.)); +#446466 = ORIENTED_EDGE('',*,*,#446467,.T.); +#446467 = EDGE_CURVE('',#446460,#446468,#446470,.T.); +#446468 = VERTEX_POINT('',#446469); +#446469 = CARTESIAN_POINT('',(125.909893,-75.480074,1.585)); +#446470 = LINE('',#446471,#446472); +#446471 = CARTESIAN_POINT('',(125.745385,-75.519663,1.585)); +#446472 = VECTOR('',#446473,1.); +#446473 = DIRECTION('',(0.97224350737,0.233971285368,0.)); +#446474 = ORIENTED_EDGE('',*,*,#446475,.T.); +#446475 = EDGE_CURVE('',#446468,#446476,#446478,.T.); +#446476 = VERTEX_POINT('',#446477); +#446477 = CARTESIAN_POINT('',(126.030188,-75.481269,1.585)); +#446478 = LINE('',#446479,#446480); +#446479 = CARTESIAN_POINT('',(125.909893,-75.480074,1.585)); +#446480 = VECTOR('',#446481,1.); +#446481 = DIRECTION('',(0.999950662343,-9.933422349189E-03,0.)); +#446482 = ORIENTED_EDGE('',*,*,#446483,.T.); +#446483 = EDGE_CURVE('',#446476,#446484,#446486,.T.); +#446484 = VERTEX_POINT('',#446485); +#446485 = CARTESIAN_POINT('',(126.19892,-75.523449,1.585)); +#446486 = LINE('',#446487,#446488); +#446487 = CARTESIAN_POINT('',(126.030188,-75.481269,1.585)); +#446488 = VECTOR('',#446489,1.); +#446489 = DIRECTION('',(0.970146558572,-0.242519390753,0.)); +#446490 = ORIENTED_EDGE('',*,*,#446491,.T.); +#446491 = EDGE_CURVE('',#446484,#446492,#446494,.T.); +#446492 = VERTEX_POINT('',#446493); +#446493 = CARTESIAN_POINT('',(126.288106,-75.57091,1.585)); +#446494 = LINE('',#446495,#446496); +#446495 = CARTESIAN_POINT('',(126.19892,-75.523449,1.585)); +#446496 = VECTOR('',#446497,1.); +#446497 = DIRECTION('',(0.882783572248,-0.469779910776,0.)); +#446498 = ORIENTED_EDGE('',*,*,#446499,.T.); +#446499 = EDGE_CURVE('',#446492,#446500,#446502,.T.); +#446500 = VERTEX_POINT('',#446501); +#446501 = CARTESIAN_POINT('',(126.370684,-75.65666,1.585)); +#446502 = LINE('',#446503,#446504); +#446503 = CARTESIAN_POINT('',(126.288106,-75.57091,1.585)); +#446504 = VECTOR('',#446505,1.); +#446505 = DIRECTION('',(0.693658797849,-0.72030373605,0.)); +#446506 = ORIENTED_EDGE('',*,*,#446507,.T.); +#446507 = EDGE_CURVE('',#446500,#446508,#446510,.T.); +#446508 = VERTEX_POINT('',#446509); +#446509 = CARTESIAN_POINT('',(126.417036,-75.796741,1.585)); +#446510 = LINE('',#446511,#446512); +#446511 = CARTESIAN_POINT('',(126.370684,-75.65666,1.585)); +#446512 = VECTOR('',#446513,1.); +#446513 = DIRECTION('',(0.314142972876,-0.949375685697,0.)); +#446514 = ORIENTED_EDGE('',*,*,#446515,.T.); +#446515 = EDGE_CURVE('',#446508,#446516,#446518,.T.); +#446516 = VERTEX_POINT('',#446517); +#446517 = CARTESIAN_POINT('',(126.41447,-75.888743,1.585)); +#446518 = LINE('',#446519,#446520); +#446519 = CARTESIAN_POINT('',(126.417036,-75.796741,1.585)); +#446520 = VECTOR('',#446521,1.); +#446521 = DIRECTION('',(-2.787985639112E-02,-0.999611281253,0.)); +#446522 = ORIENTED_EDGE('',*,*,#446523,.T.); +#446523 = EDGE_CURVE('',#446516,#446524,#446526,.T.); +#446524 = VERTEX_POINT('',#446525); +#446525 = CARTESIAN_POINT('',(126.370681,-76.013016,1.585)); +#446526 = LINE('',#446527,#446528); +#446527 = CARTESIAN_POINT('',(126.41447,-75.888743,1.585)); +#446528 = VECTOR('',#446529,1.); +#446529 = DIRECTION('',(-0.33233376584,-0.943161846176,0.)); +#446530 = ORIENTED_EDGE('',*,*,#446531,.T.); +#446531 = EDGE_CURVE('',#446524,#446532,#446534,.T.); +#446532 = VERTEX_POINT('',#446533); +#446533 = CARTESIAN_POINT('',(126.326202,-76.060668,1.585)); +#446534 = LINE('',#446535,#446536); +#446535 = CARTESIAN_POINT('',(126.370681,-76.013016,1.585)); +#446536 = VECTOR('',#446537,1.); +#446537 = DIRECTION('',(-0.682349405319,-0.731026189039,0.)); +#446538 = ORIENTED_EDGE('',*,*,#446539,.T.); +#446539 = EDGE_CURVE('',#446532,#446540,#446542,.T.); +#446540 = VERTEX_POINT('',#446541); +#446541 = CARTESIAN_POINT('',(126.244652,-76.006179,1.585)); +#446542 = CIRCLE('',#446543,5.000013220365E-02); +#446543 = AXIS2_PLACEMENT_3D('',#446544,#446545,#446546); +#446544 = CARTESIAN_POINT('',(126.29084623032,-76.02531290459,1.585)); +#446545 = DIRECTION('',(-0.,0.,-1.)); +#446546 = DIRECTION('',(0.70711352384,-0.707100038469,-0.)); +#446547 = ORIENTED_EDGE('',*,*,#446548,.T.); +#446548 = EDGE_CURVE('',#446540,#446549,#446551,.T.); +#446549 = VERTEX_POINT('',#446550); +#446550 = CARTESIAN_POINT('',(126.285239,-75.960207,1.585)); +#446551 = LINE('',#446552,#446553); +#446552 = CARTESIAN_POINT('',(126.244652,-76.006179,1.585)); +#446553 = VECTOR('',#446554,1.); +#446554 = DIRECTION('',(0.661836800125,0.749647950707,0.)); +#446555 = ORIENTED_EDGE('',*,*,#446556,.T.); +#446556 = EDGE_CURVE('',#446549,#446557,#446559,.T.); +#446557 = VERTEX_POINT('',#446558); +#446558 = CARTESIAN_POINT('',(126.285239,-75.709463,1.585)); +#446559 = CIRCLE('',#446560,0.250724512385); +#446560 = AXIS2_PLACEMENT_3D('',#446561,#446562,#446563); +#446561 = CARTESIAN_POINT('',(126.0681108288,-75.834835,1.585)); +#446562 = DIRECTION('',(0.,-0.,1.)); +#446563 = DIRECTION('',(0.866002965287,-0.500038862604,-0.)); +#446564 = ORIENTED_EDGE('',*,*,#446565,.T.); +#446565 = EDGE_CURVE('',#446557,#446566,#446568,.T.); +#446566 = VERTEX_POINT('',#446567); +#446567 = CARTESIAN_POINT('',(126.223134,-75.647358,1.585)); +#446568 = LINE('',#446569,#446570); +#446569 = CARTESIAN_POINT('',(126.285239,-75.709463,1.585)); +#446570 = VECTOR('',#446571,1.); +#446571 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#446572 = ORIENTED_EDGE('',*,*,#446573,.T.); +#446573 = EDGE_CURVE('',#446566,#446574,#446576,.T.); +#446574 = VERTEX_POINT('',#446575); +#446575 = CARTESIAN_POINT('',(125.916048,-75.580074,1.585)); +#446576 = CIRCLE('',#446577,0.500385876762); +#446577 = AXIS2_PLACEMENT_3D('',#446578,#446579,#446580); +#446578 = CARTESIAN_POINT('',(125.96791578795,-76.07776442409,1.585)); +#446579 = DIRECTION('',(0.,0.,1.)); +#446580 = DIRECTION('',(0.510042796769,0.860149025149,-0.)); +#446581 = ORIENTED_EDGE('',*,*,#446582,.T.); +#446582 = EDGE_CURVE('',#446574,#446583,#446585,.T.); +#446583 = VERTEX_POINT('',#446584); +#446584 = CARTESIAN_POINT('',(125.774963,-75.615345,1.585)); +#446585 = LINE('',#446586,#446587); +#446586 = CARTESIAN_POINT('',(125.916048,-75.580074,1.585)); +#446587 = VECTOR('',#446588,1.); +#446588 = DIRECTION('',(-0.970142904632,-0.242534007083,0.)); +#446589 = ORIENTED_EDGE('',*,*,#446590,.T.); +#446590 = EDGE_CURVE('',#446583,#446591,#446593,.T.); +#446591 = VERTEX_POINT('',#446592); +#446592 = CARTESIAN_POINT('',(125.710939,-75.647358,1.585)); +#446593 = LINE('',#446594,#446595); +#446594 = CARTESIAN_POINT('',(125.774963,-75.615345,1.585)); +#446595 = VECTOR('',#446596,1.); +#446596 = DIRECTION('',(-0.894421602891,-0.447224771544,0.)); +#446597 = ORIENTED_EDGE('',*,*,#446598,.T.); +#446598 = EDGE_CURVE('',#446591,#446599,#446601,.T.); +#446599 = VERTEX_POINT('',#446600); +#446600 = CARTESIAN_POINT('',(125.648833,-75.709463,1.585)); +#446601 = LINE('',#446602,#446603); +#446602 = CARTESIAN_POINT('',(125.710939,-75.647358,1.585)); +#446603 = VECTOR('',#446604,1.); +#446604 = DIRECTION('',(-0.707112473951,-0.707101088377,0.)); +#446605 = ORIENTED_EDGE('',*,*,#446606,.T.); +#446606 = EDGE_CURVE('',#446599,#446607,#446609,.T.); +#446607 = VERTEX_POINT('',#446608); +#446608 = CARTESIAN_POINT('',(125.648833,-75.960207,1.585)); +#446609 = CIRCLE('',#446610,0.250727778675); +#446610 = AXIS2_PLACEMENT_3D('',#446611,#446612,#446613); +#446611 = CARTESIAN_POINT('',(125.86596494287,-75.834835,1.585)); +#446612 = DIRECTION('',(0.,0.,1.)); +#446613 = DIRECTION('',(-0.866006726575,0.50003234848,0.)); +#446614 = ORIENTED_EDGE('',*,*,#446615,.T.); +#446615 = EDGE_CURVE('',#446607,#446616,#446618,.T.); +#446616 = VERTEX_POINT('',#446617); +#446617 = CARTESIAN_POINT('',(125.689421,-76.006179,1.585)); +#446618 = LINE('',#446619,#446620); +#446619 = CARTESIAN_POINT('',(125.648833,-75.960207,1.585)); +#446620 = VECTOR('',#446621,1.); +#446621 = DIRECTION('',(0.661845963842,-0.749639860297,0.)); +#446622 = ORIENTED_EDGE('',*,*,#446623,.T.); +#446623 = EDGE_CURVE('',#446616,#446624,#446626,.T.); +#446624 = VERTEX_POINT('',#446625); +#446625 = CARTESIAN_POINT('',(125.624092,-76.071506,1.585)); +#446626 = CIRCLE('',#446627,4.999995591095E-02); +#446627 = AXIS2_PLACEMENT_3D('',#446628,#446629,#446630); +#446628 = CARTESIAN_POINT('',(125.64322670713,-76.02531229291,1.585)); +#446629 = DIRECTION('',(0.,0.,-1.)); +#446630 = DIRECTION('',(0.923886671941,0.382666195803,0.)); +#446631 = ORIENTED_EDGE('',*,*,#446632,.T.); +#446632 = EDGE_CURVE('',#446624,#446633,#446635,.T.); +#446633 = VERTEX_POINT('',#446634); +#446634 = CARTESIAN_POINT('',(125.567359,-76.019977,1.585)); +#446635 = LINE('',#446636,#446637); +#446636 = CARTESIAN_POINT('',(125.624092,-76.071506,1.585)); +#446637 = VECTOR('',#446638,1.); +#446638 = DIRECTION('',(-0.740241692799,0.672340863135,0.)); +#446639 = ORIENTED_EDGE('',*,*,#446640,.T.); +#446640 = EDGE_CURVE('',#446633,#446641,#446643,.T.); +#446641 = VERTEX_POINT('',#446642); +#446642 = CARTESIAN_POINT('',(125.557698,-76.003028,1.585)); +#446643 = LINE('',#446644,#446645); +#446644 = CARTESIAN_POINT('',(125.567359,-76.019977,1.585)); +#446645 = VECTOR('',#446646,1.); +#446646 = DIRECTION('',(-0.495205752194,0.868775726522,0.)); +#446647 = ORIENTED_EDGE('',*,*,#446648,.T.); +#446648 = EDGE_CURVE('',#446641,#446649,#446651,.T.); +#446649 = VERTEX_POINT('',#446650); +#446650 = CARTESIAN_POINT('',(125.517036,-75.872932,1.585)); +#446651 = LINE('',#446652,#446653); +#446652 = CARTESIAN_POINT('',(125.557698,-76.003028,1.585)); +#446653 = VECTOR('',#446654,1.); +#446654 = DIRECTION('',(-0.29832178007,0.954465355859,0.)); +#446655 = ORIENTED_EDGE('',*,*,#446656,.T.); +#446656 = EDGE_CURVE('',#446649,#446657,#446659,.T.); +#446657 = VERTEX_POINT('',#446658); +#446658 = CARTESIAN_POINT('',(125.519602,-75.780929,1.585)); +#446659 = LINE('',#446660,#446661); +#446660 = CARTESIAN_POINT('',(125.517036,-75.872932,1.585)); +#446661 = VECTOR('',#446662,1.); +#446662 = DIRECTION('',(2.787955359462E-02,0.999611289698,0.)); +#446663 = ORIENTED_EDGE('',*,*,#446664,.T.); +#446664 = EDGE_CURVE('',#446657,#446665,#446667,.T.); +#446665 = VERTEX_POINT('',#446666); +#446666 = CARTESIAN_POINT('',(125.563388,-75.65666,1.585)); +#446667 = LINE('',#446668,#446669); +#446668 = CARTESIAN_POINT('',(125.519602,-75.780929,1.585)); +#446669 = VECTOR('',#446670,1.); +#446670 = DIRECTION('',(0.332323027254,0.94316562997,0.)); +#446671 = ORIENTED_EDGE('',*,*,#446672,.T.); +#446672 = EDGE_CURVE('',#446665,#446458,#446673,.T.); +#446673 = LINE('',#446674,#446675); +#446674 = CARTESIAN_POINT('',(125.563388,-75.65666,1.585)); +#446675 = VECTOR('',#446676,1.); +#446676 = DIRECTION('',(0.70879937829,0.705410122791,0.)); +#446677 = PLANE('',#446678); +#446678 = AXIS2_PLACEMENT_3D('',#446679,#446680,#446681); +#446679 = CARTESIAN_POINT('',(0.,0.,1.585)); +#446680 = DIRECTION('',(0.,0.,1.)); +#446681 = DIRECTION('',(1.,0.,-0.)); +#446682 = SHELL_BASED_SURFACE_MODEL('',(#446683)); +#446683 = OPEN_SHELL('',(#446684)); +#446684 = ADVANCED_FACE('',(#446685),#446746,.T.); +#446685 = FACE_BOUND('',#446686,.F.); +#446686 = EDGE_LOOP('',(#446687,#446698,#446706,#446715,#446723,#446731, + #446740)); +#446687 = ORIENTED_EDGE('',*,*,#446688,.T.); +#446688 = EDGE_CURVE('',#446689,#446691,#446693,.T.); +#446689 = VERTEX_POINT('',#446690); +#446690 = CARTESIAN_POINT('',(122.975315,-75.767985,1.585)); +#446691 = VERTEX_POINT('',#446692); +#446692 = CARTESIAN_POINT('',(122.975315,-75.673117,1.585)); +#446693 = CIRCLE('',#446694,4.999970343241E-02); +#446694 = AXIS2_PLACEMENT_3D('',#446695,#446696,#446697); +#446695 = CARTESIAN_POINT('',(122.99112594517,-75.720551,1.585)); +#446696 = DIRECTION('',(0.,0.,-1.)); +#446697 = DIRECTION('',(-0.316220779119,-0.948685626988,-0.)); +#446698 = ORIENTED_EDGE('',*,*,#446699,.T.); +#446699 = EDGE_CURVE('',#446691,#446700,#446702,.T.); +#446700 = VERTEX_POINT('',#446701); +#446701 = CARTESIAN_POINT('',(123.775314,-75.40645,1.585)); +#446702 = LINE('',#446703,#446704); +#446703 = CARTESIAN_POINT('',(122.975315,-75.673117,1.585)); +#446704 = VECTOR('',#446705,1.); +#446705 = DIRECTION('',(0.948683060879,0.31622847753,0.)); +#446706 = ORIENTED_EDGE('',*,*,#446707,.T.); +#446707 = EDGE_CURVE('',#446700,#446708,#446710,.T.); +#446708 = VERTEX_POINT('',#446709); +#446709 = CARTESIAN_POINT('',(123.806937,-75.501318,1.585)); +#446710 = CIRCLE('',#446711,4.999987888761E-02); +#446711 = AXIS2_PLACEMENT_3D('',#446712,#446713,#446714); +#446712 = CARTESIAN_POINT('',(123.79112618811,-75.45388377062,1.585)); +#446713 = DIRECTION('',(0.,0.,-1.)); +#446714 = DIRECTION('',(-0.316244528402,0.948677710424,-0.)); +#446715 = ORIENTED_EDGE('',*,*,#446716,.T.); +#446716 = EDGE_CURVE('',#446708,#446717,#446719,.T.); +#446717 = VERTEX_POINT('',#446718); +#446718 = CARTESIAN_POINT('',(123.149239,-75.72055,1.585)); +#446719 = LINE('',#446720,#446721); +#446720 = CARTESIAN_POINT('',(123.806937,-75.501318,1.585)); +#446721 = VECTOR('',#446722,1.); +#446722 = DIRECTION('',(-0.948683586536,-0.316226900558,0.)); +#446723 = ORIENTED_EDGE('',*,*,#446724,.T.); +#446724 = EDGE_CURVE('',#446717,#446725,#446727,.T.); +#446725 = VERTEX_POINT('',#446726); +#446726 = CARTESIAN_POINT('',(123.806938,-75.939783,1.585)); +#446727 = LINE('',#446728,#446729); +#446728 = CARTESIAN_POINT('',(123.149239,-75.72055,1.585)); +#446729 = VECTOR('',#446730,1.); +#446730 = DIRECTION('',(0.948683298051,-0.316227766017,0.)); +#446731 = ORIENTED_EDGE('',*,*,#446732,.T.); +#446732 = EDGE_CURVE('',#446725,#446733,#446735,.T.); +#446733 = VERTEX_POINT('',#446734); +#446734 = CARTESIAN_POINT('',(123.775315,-76.034651,1.585)); +#446735 = CIRCLE('',#446736,4.999987888685E-02); +#446736 = AXIS2_PLACEMENT_3D('',#446737,#446738,#446739); +#446737 = CARTESIAN_POINT('',(123.79112586386,-75.98721678795,1.585)); +#446738 = DIRECTION('',(0.,0.,-1.)); +#446739 = DIRECTION('',(0.316243488814,0.948678056973,0.)); +#446740 = ORIENTED_EDGE('',*,*,#446741,.T.); +#446741 = EDGE_CURVE('',#446733,#446689,#446742,.T.); +#446742 = LINE('',#446743,#446744); +#446743 = CARTESIAN_POINT('',(123.775315,-76.034651,1.585)); +#446744 = VECTOR('',#446745,1.); +#446745 = DIRECTION('',(-0.948683535221,0.316227054504,0.)); +#446746 = PLANE('',#446747); +#446747 = AXIS2_PLACEMENT_3D('',#446748,#446749,#446750); +#446748 = CARTESIAN_POINT('',(0.,0.,1.585)); +#446749 = DIRECTION('',(0.,0.,1.)); +#446750 = DIRECTION('',(1.,0.,-0.)); +#446751 = SHELL_BASED_SURFACE_MODEL('',(#446752)); +#446752 = OPEN_SHELL('',(#446753)); +#446753 = ADVANCED_FACE('',(#446754),#447025,.T.); +#446754 = FACE_BOUND('',#446755,.F.); +#446755 = EDGE_LOOP('',(#446756,#446766,#446774,#446782,#446790,#446798, + #446806,#446814,#446822,#446830,#446839,#446847,#446855,#446863, + #446871,#446880,#446888,#446896,#446904,#446913,#446921,#446929, + #446937,#446946,#446954,#446963,#446971,#446979,#446987,#446995, + #447003,#447011,#447019)); +#446756 = ORIENTED_EDGE('',*,*,#446757,.T.); +#446757 = EDGE_CURVE('',#446758,#446760,#446762,.T.); +#446758 = VERTEX_POINT('',#446759); +#446759 = CARTESIAN_POINT('',(121.795096,-74.799639,1.585)); +#446760 = VERTEX_POINT('',#446761); +#446761 = CARTESIAN_POINT('',(121.88152,-74.757758,1.585)); +#446762 = LINE('',#446763,#446764); +#446763 = CARTESIAN_POINT('',(121.795096,-74.799639,1.585)); +#446764 = VECTOR('',#446765,1.); +#446765 = DIRECTION('',(0.899902158909,0.436091853158,0.)); +#446766 = ORIENTED_EDGE('',*,*,#446767,.T.); +#446767 = EDGE_CURVE('',#446760,#446768,#446770,.T.); +#446768 = VERTEX_POINT('',#446769); +#446769 = CARTESIAN_POINT('',(122.046028,-74.718169,1.585)); +#446770 = LINE('',#446771,#446772); +#446771 = CARTESIAN_POINT('',(121.88152,-74.757758,1.585)); +#446772 = VECTOR('',#446773,1.); +#446773 = DIRECTION('',(0.97224350737,0.233971285368,0.)); +#446774 = ORIENTED_EDGE('',*,*,#446775,.T.); +#446775 = EDGE_CURVE('',#446768,#446776,#446778,.T.); +#446776 = VERTEX_POINT('',#446777); +#446777 = CARTESIAN_POINT('',(122.166323,-74.719364,1.585)); +#446778 = LINE('',#446779,#446780); +#446779 = CARTESIAN_POINT('',(122.046028,-74.718169,1.585)); +#446780 = VECTOR('',#446781,1.); +#446781 = DIRECTION('',(0.999950662343,-9.933422349189E-03,0.)); +#446782 = ORIENTED_EDGE('',*,*,#446783,.T.); +#446783 = EDGE_CURVE('',#446776,#446784,#446786,.T.); +#446784 = VERTEX_POINT('',#446785); +#446785 = CARTESIAN_POINT('',(122.335055,-74.761544,1.585)); +#446786 = LINE('',#446787,#446788); +#446787 = CARTESIAN_POINT('',(122.166323,-74.719364,1.585)); +#446788 = VECTOR('',#446789,1.); +#446789 = DIRECTION('',(0.970146558572,-0.242519390753,0.)); +#446790 = ORIENTED_EDGE('',*,*,#446791,.T.); +#446791 = EDGE_CURVE('',#446784,#446792,#446794,.T.); +#446792 = VERTEX_POINT('',#446793); +#446793 = CARTESIAN_POINT('',(122.424241,-74.809005,1.585)); +#446794 = LINE('',#446795,#446796); +#446795 = CARTESIAN_POINT('',(122.335055,-74.761544,1.585)); +#446796 = VECTOR('',#446797,1.); +#446797 = DIRECTION('',(0.882783572248,-0.469779910776,0.)); +#446798 = ORIENTED_EDGE('',*,*,#446799,.T.); +#446799 = EDGE_CURVE('',#446792,#446800,#446802,.T.); +#446800 = VERTEX_POINT('',#446801); +#446801 = CARTESIAN_POINT('',(122.506819,-74.894755,1.585)); +#446802 = LINE('',#446803,#446804); +#446803 = CARTESIAN_POINT('',(122.424241,-74.809005,1.585)); +#446804 = VECTOR('',#446805,1.); +#446805 = DIRECTION('',(0.693658797849,-0.72030373605,0.)); +#446806 = ORIENTED_EDGE('',*,*,#446807,.T.); +#446807 = EDGE_CURVE('',#446800,#446808,#446810,.T.); +#446808 = VERTEX_POINT('',#446809); +#446809 = CARTESIAN_POINT('',(122.553171,-75.034836,1.585)); +#446810 = LINE('',#446811,#446812); +#446811 = CARTESIAN_POINT('',(122.506819,-74.894755,1.585)); +#446812 = VECTOR('',#446813,1.); +#446813 = DIRECTION('',(0.314142972876,-0.949375685697,0.)); +#446814 = ORIENTED_EDGE('',*,*,#446815,.T.); +#446815 = EDGE_CURVE('',#446808,#446816,#446818,.T.); +#446816 = VERTEX_POINT('',#446817); +#446817 = CARTESIAN_POINT('',(122.550928,-75.160394,1.585)); +#446818 = LINE('',#446819,#446820); +#446819 = CARTESIAN_POINT('',(122.553171,-75.034836,1.585)); +#446820 = VECTOR('',#446821,1.); +#446821 = DIRECTION('',(-1.786140412871E-02,-0.999840472397,0.)); +#446822 = ORIENTED_EDGE('',*,*,#446823,.T.); +#446823 = EDGE_CURVE('',#446816,#446824,#446826,.T.); +#446824 = VERTEX_POINT('',#446825); +#446825 = CARTESIAN_POINT('',(122.509797,-75.247673,1.585)); +#446826 = LINE('',#446827,#446828); +#446827 = CARTESIAN_POINT('',(122.550928,-75.160394,1.585)); +#446828 = VECTOR('',#446829,1.); +#446829 = DIRECTION('',(-0.426293606647,-0.904584855573,0.)); +#446830 = ORIENTED_EDGE('',*,*,#446831,.T.); +#446831 = EDGE_CURVE('',#446824,#446832,#446834,.T.); +#446832 = VERTEX_POINT('',#446833); +#446833 = CARTESIAN_POINT('',(122.420355,-75.202951,1.585)); +#446834 = CIRCLE('',#446835,4.999982161969E-02); +#446835 = AXIS2_PLACEMENT_3D('',#446836,#446837,#446838); +#446836 = CARTESIAN_POINT('',(122.46507599642,-75.22531200715,1.585)); +#446837 = DIRECTION('',(-0.,0.,-1.)); +#446838 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#446839 = ORIENTED_EDGE('',*,*,#446840,.T.); +#446840 = EDGE_CURVE('',#446832,#446841,#446843,.T.); +#446841 = VERTEX_POINT('',#446842); +#446842 = CARTESIAN_POINT('',(122.453171,-75.137319,1.585)); +#446843 = LINE('',#446844,#446845); +#446844 = CARTESIAN_POINT('',(122.420355,-75.202951,1.585)); +#446845 = VECTOR('',#446846,1.); +#446846 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#446847 = ORIENTED_EDGE('',*,*,#446848,.T.); +#446848 = EDGE_CURVE('',#446841,#446849,#446851,.T.); +#446849 = VERTEX_POINT('',#446850); +#446850 = CARTESIAN_POINT('',(122.453171,-75.042948,1.585)); +#446851 = LINE('',#446852,#446853); +#446852 = CARTESIAN_POINT('',(122.453171,-75.137319,1.585)); +#446853 = VECTOR('',#446854,1.); +#446854 = DIRECTION('',(0.,1.,0.)); +#446855 = ORIENTED_EDGE('',*,*,#446856,.T.); +#446856 = EDGE_CURVE('',#446849,#446857,#446859,.T.); +#446857 = VERTEX_POINT('',#446858); +#446858 = CARTESIAN_POINT('',(122.421374,-74.947558,1.585)); +#446859 = LINE('',#446860,#446861); +#446860 = CARTESIAN_POINT('',(122.453171,-75.042948,1.585)); +#446861 = VECTOR('',#446862,1.); +#446862 = DIRECTION('',(-0.316230749606,0.948682303516,0.)); +#446863 = ORIENTED_EDGE('',*,*,#446864,.T.); +#446864 = EDGE_CURVE('',#446857,#446865,#446867,.T.); +#446865 = VERTEX_POINT('',#446866); +#446866 = CARTESIAN_POINT('',(122.359269,-74.885453,1.585)); +#446867 = LINE('',#446868,#446869); +#446868 = CARTESIAN_POINT('',(122.421374,-74.947558,1.585)); +#446869 = VECTOR('',#446870,1.); +#446870 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#446871 = ORIENTED_EDGE('',*,*,#446872,.T.); +#446872 = EDGE_CURVE('',#446865,#446873,#446875,.T.); +#446873 = VERTEX_POINT('',#446874); +#446874 = CARTESIAN_POINT('',(122.052183,-74.818169,1.585)); +#446875 = CIRCLE('',#446876,0.500385876762); +#446876 = AXIS2_PLACEMENT_3D('',#446877,#446878,#446879); +#446877 = CARTESIAN_POINT('',(122.10405078795,-75.31585942409,1.585)); +#446878 = DIRECTION('',(0.,0.,1.)); +#446879 = DIRECTION('',(0.510042796769,0.860149025149,-0.)); +#446880 = ORIENTED_EDGE('',*,*,#446881,.T.); +#446881 = EDGE_CURVE('',#446873,#446882,#446884,.T.); +#446882 = VERTEX_POINT('',#446883); +#446883 = CARTESIAN_POINT('',(121.911098,-74.85344,1.585)); +#446884 = LINE('',#446885,#446886); +#446885 = CARTESIAN_POINT('',(122.052183,-74.818169,1.585)); +#446886 = VECTOR('',#446887,1.); +#446887 = DIRECTION('',(-0.970142904632,-0.242534007083,0.)); +#446888 = ORIENTED_EDGE('',*,*,#446889,.T.); +#446889 = EDGE_CURVE('',#446882,#446890,#446892,.T.); +#446890 = VERTEX_POINT('',#446891); +#446891 = CARTESIAN_POINT('',(121.847074,-74.885453,1.585)); +#446892 = LINE('',#446893,#446894); +#446893 = CARTESIAN_POINT('',(121.911098,-74.85344,1.585)); +#446894 = VECTOR('',#446895,1.); +#446895 = DIRECTION('',(-0.894421602891,-0.447224771544,0.)); +#446896 = ORIENTED_EDGE('',*,*,#446897,.T.); +#446897 = EDGE_CURVE('',#446890,#446898,#446900,.T.); +#446898 = VERTEX_POINT('',#446899); +#446899 = CARTESIAN_POINT('',(121.784968,-74.947558,1.585)); +#446900 = LINE('',#446901,#446902); +#446901 = CARTESIAN_POINT('',(121.847074,-74.885453,1.585)); +#446902 = VECTOR('',#446903,1.); +#446903 = DIRECTION('',(-0.707112473951,-0.707101088377,0.)); +#446904 = ORIENTED_EDGE('',*,*,#446905,.T.); +#446905 = EDGE_CURVE('',#446898,#446906,#446908,.T.); +#446906 = VERTEX_POINT('',#446907); +#446907 = CARTESIAN_POINT('',(121.784968,-75.198302,1.585)); +#446908 = CIRCLE('',#446909,0.250727778675); +#446909 = AXIS2_PLACEMENT_3D('',#446910,#446911,#446912); +#446910 = CARTESIAN_POINT('',(122.00209994287,-75.07293,1.585)); +#446911 = DIRECTION('',(0.,0.,1.)); +#446912 = DIRECTION('',(-0.866006726575,0.50003234848,0.)); +#446913 = ORIENTED_EDGE('',*,*,#446914,.T.); +#446914 = EDGE_CURVE('',#446906,#446915,#446917,.T.); +#446915 = VERTEX_POINT('',#446916); +#446916 = CARTESIAN_POINT('',(121.800073,-75.213408,1.585)); +#446917 = LINE('',#446918,#446919); +#446918 = CARTESIAN_POINT('',(121.784968,-75.198302,1.585)); +#446919 = VECTOR('',#446920,1.); +#446920 = DIRECTION('',(0.707083375192,-0.707130186406,0.)); +#446921 = ORIENTED_EDGE('',*,*,#446922,.T.); +#446922 = EDGE_CURVE('',#446915,#446923,#446925,.T.); +#446923 = VERTEX_POINT('',#446924); +#446924 = CARTESIAN_POINT('',(121.996028,-75.213408,1.585)); +#446925 = LINE('',#446926,#446927); +#446926 = CARTESIAN_POINT('',(121.800073,-75.213408,1.585)); +#446927 = VECTOR('',#446928,1.); +#446928 = DIRECTION('',(1.,0.,0.)); +#446929 = ORIENTED_EDGE('',*,*,#446930,.T.); +#446930 = EDGE_CURVE('',#446923,#446931,#446933,.T.); +#446931 = VERTEX_POINT('',#446932); +#446932 = CARTESIAN_POINT('',(121.996028,-75.111027,1.585)); +#446933 = LINE('',#446934,#446935); +#446934 = CARTESIAN_POINT('',(121.996028,-75.213408,1.585)); +#446935 = VECTOR('',#446936,1.); +#446936 = DIRECTION('',(0.,1.,0.)); +#446937 = ORIENTED_EDGE('',*,*,#446938,.T.); +#446938 = EDGE_CURVE('',#446931,#446939,#446941,.T.); +#446939 = VERTEX_POINT('',#446940); +#446940 = CARTESIAN_POINT('',(122.096028,-75.111027,1.585)); +#446941 = CIRCLE('',#446942,5.000000000003E-02); +#446942 = AXIS2_PLACEMENT_3D('',#446943,#446944,#446945); +#446943 = CARTESIAN_POINT('',(122.046028,-75.11102704771,1.585)); +#446944 = DIRECTION('',(0.,0.,-1.)); +#446945 = DIRECTION('',(-1.,9.542364409747E-07,0.)); +#446946 = ORIENTED_EDGE('',*,*,#446947,.T.); +#446947 = EDGE_CURVE('',#446939,#446948,#446950,.T.); +#446948 = VERTEX_POINT('',#446949); +#446949 = CARTESIAN_POINT('',(122.096028,-75.263408,1.585)); +#446950 = LINE('',#446951,#446952); +#446951 = CARTESIAN_POINT('',(122.096028,-75.111027,1.585)); +#446952 = VECTOR('',#446953,1.); +#446953 = DIRECTION('',(0.,-1.,0.)); +#446954 = ORIENTED_EDGE('',*,*,#446955,.T.); +#446955 = EDGE_CURVE('',#446948,#446956,#446958,.T.); +#446956 = VERTEX_POINT('',#446957); +#446957 = CARTESIAN_POINT('',(122.046028,-75.313408,1.585)); +#446958 = CIRCLE('',#446959,5.000014378933E-02); +#446959 = AXIS2_PLACEMENT_3D('',#446960,#446961,#446962); +#446960 = CARTESIAN_POINT('',(122.04602785621,-75.26340785621,1.585)); +#446961 = DIRECTION('',(0.,0.,-1.)); +#446962 = DIRECTION('',(0.999999999996,-2.8757741865E-06,0.)); +#446963 = ORIENTED_EDGE('',*,*,#446964,.T.); +#446964 = EDGE_CURVE('',#446956,#446965,#446967,.T.); +#446965 = VERTEX_POINT('',#446966); +#446966 = CARTESIAN_POINT('',(121.779362,-75.313408,1.585)); +#446967 = LINE('',#446968,#446969); +#446968 = CARTESIAN_POINT('',(122.046028,-75.313408,1.585)); +#446969 = VECTOR('',#446970,1.); +#446970 = DIRECTION('',(-1.,0.,0.)); +#446971 = ORIENTED_EDGE('',*,*,#446972,.T.); +#446972 = EDGE_CURVE('',#446965,#446973,#446975,.T.); +#446973 = VERTEX_POINT('',#446974); +#446974 = CARTESIAN_POINT('',(121.760227,-75.309601,1.585)); +#446975 = LINE('',#446976,#446977); +#446976 = CARTESIAN_POINT('',(121.779362,-75.313408,1.585)); +#446977 = VECTOR('',#446978,1.); +#446978 = DIRECTION('',(-0.980777317489,0.195130350022,0.)); +#446979 = ORIENTED_EDGE('',*,*,#446980,.T.); +#446980 = EDGE_CURVE('',#446973,#446981,#446983,.T.); +#446981 = VERTEX_POINT('',#446982); +#446982 = CARTESIAN_POINT('',(121.703494,-75.258072,1.585)); +#446983 = LINE('',#446984,#446985); +#446984 = CARTESIAN_POINT('',(121.760227,-75.309601,1.585)); +#446985 = VECTOR('',#446986,1.); +#446986 = DIRECTION('',(-0.740241692799,0.672340863135,0.)); +#446987 = ORIENTED_EDGE('',*,*,#446988,.T.); +#446988 = EDGE_CURVE('',#446981,#446989,#446991,.T.); +#446989 = VERTEX_POINT('',#446990); +#446990 = CARTESIAN_POINT('',(121.693833,-75.241123,1.585)); +#446991 = LINE('',#446992,#446993); +#446992 = CARTESIAN_POINT('',(121.703494,-75.258072,1.585)); +#446993 = VECTOR('',#446994,1.); +#446994 = DIRECTION('',(-0.495205752194,0.868775726522,0.)); +#446995 = ORIENTED_EDGE('',*,*,#446996,.T.); +#446996 = EDGE_CURVE('',#446989,#446997,#446999,.T.); +#446997 = VERTEX_POINT('',#446998); +#446998 = CARTESIAN_POINT('',(121.653171,-75.111027,1.585)); +#446999 = LINE('',#447000,#447001); +#447000 = CARTESIAN_POINT('',(121.693833,-75.241123,1.585)); +#447001 = VECTOR('',#447002,1.); +#447002 = DIRECTION('',(-0.29832178007,0.954465355859,0.)); +#447003 = ORIENTED_EDGE('',*,*,#447004,.T.); +#447004 = EDGE_CURVE('',#446997,#447005,#447007,.T.); +#447005 = VERTEX_POINT('',#447006); +#447006 = CARTESIAN_POINT('',(121.655737,-75.019024,1.585)); +#447007 = LINE('',#447008,#447009); +#447008 = CARTESIAN_POINT('',(121.653171,-75.111027,1.585)); +#447009 = VECTOR('',#447010,1.); +#447010 = DIRECTION('',(2.787955359462E-02,0.999611289698,0.)); +#447011 = ORIENTED_EDGE('',*,*,#447012,.T.); +#447012 = EDGE_CURVE('',#447005,#447013,#447015,.T.); +#447013 = VERTEX_POINT('',#447014); +#447014 = CARTESIAN_POINT('',(121.699523,-74.894755,1.585)); +#447015 = LINE('',#447016,#447017); +#447016 = CARTESIAN_POINT('',(121.655737,-75.019024,1.585)); +#447017 = VECTOR('',#447018,1.); +#447018 = DIRECTION('',(0.332323027254,0.94316562997,0.)); +#447019 = ORIENTED_EDGE('',*,*,#447020,.T.); +#447020 = EDGE_CURVE('',#447013,#446758,#447021,.T.); +#447021 = LINE('',#447022,#447023); +#447022 = CARTESIAN_POINT('',(121.699523,-74.894755,1.585)); +#447023 = VECTOR('',#447024,1.); +#447024 = DIRECTION('',(0.70879937829,0.705410122791,0.)); +#447025 = PLANE('',#447026); +#447026 = AXIS2_PLACEMENT_3D('',#447027,#447028,#447029); +#447027 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447028 = DIRECTION('',(0.,0.,1.)); +#447029 = DIRECTION('',(1.,0.,-0.)); +#447030 = SHELL_BASED_SURFACE_MODEL('',(#447031)); +#447031 = OPEN_SHELL('',(#447032)); +#447032 = ADVANCED_FACE('',(#447033),#447320,.T.); +#447033 = FACE_BOUND('',#447034,.F.); +#447034 = EDGE_LOOP('',(#447035,#447046,#447054,#447062,#447071,#447079, + #447087,#447095,#447103,#447111,#447119,#447127,#447136,#447144, + #447152,#447160,#447168,#447176,#447185,#447193,#447201,#447210, + #447218,#447226,#447234,#447242,#447250,#447258,#447266,#447274, + #447282,#447290,#447298,#447306,#447314)); +#447035 = ORIENTED_EDGE('',*,*,#447036,.T.); +#447036 = EDGE_CURVE('',#447037,#447039,#447041,.T.); +#447037 = VERTEX_POINT('',#447038); +#447038 = CARTESIAN_POINT('',(124.269743,-74.752358,1.585)); +#447039 = VERTEX_POINT('',#447040); +#447040 = CARTESIAN_POINT('',(124.364611,-74.783981,1.585)); +#447041 = CIRCLE('',#447042,4.999987888243E-02); +#447042 = AXIS2_PLACEMENT_3D('',#447043,#447044,#447045); +#447043 = CARTESIAN_POINT('',(124.31717697079,-74.76816958761,1.585)); +#447044 = DIRECTION('',(0.,0.,-1.)); +#447045 = DIRECTION('',(-0.948681713962,0.316232518242,0.)); +#447046 = ORIENTED_EDGE('',*,*,#447047,.T.); +#447047 = EDGE_CURVE('',#447039,#447048,#447050,.T.); +#447048 = VERTEX_POINT('',#447049); +#447049 = CARTESIAN_POINT('',(124.329081,-74.890569,1.585)); +#447050 = LINE('',#447051,#447052); +#447051 = CARTESIAN_POINT('',(124.364611,-74.783981,1.585)); +#447052 = VECTOR('',#447053,1.); +#447053 = DIRECTION('',(-0.316233106284,-0.948681517945,0.)); +#447054 = ORIENTED_EDGE('',*,*,#447055,.T.); +#447055 = EDGE_CURVE('',#447048,#447056,#447058,.T.); +#447056 = VERTEX_POINT('',#447057); +#447057 = CARTESIAN_POINT('',(124.329081,-75.061127,1.585)); +#447058 = LINE('',#447059,#447060); +#447059 = CARTESIAN_POINT('',(124.329081,-74.890569,1.585)); +#447060 = VECTOR('',#447061,1.); +#447061 = DIRECTION('',(0.,-1.,0.)); +#447062 = ORIENTED_EDGE('',*,*,#447063,.T.); +#447063 = EDGE_CURVE('',#447056,#447064,#447066,.T.); +#447064 = VERTEX_POINT('',#447065); +#447065 = CARTESIAN_POINT('',(124.443265,-75.175312,1.585)); +#447066 = CIRCLE('',#447067,0.160769240404); +#447067 = AXIS2_PLACEMENT_3D('',#447068,#447069,#447070); +#447068 = CARTESIAN_POINT('',(124.48447830989,-75.01991505103,1.585)); +#447069 = DIRECTION('',(0.,0.,1.)); +#447070 = DIRECTION('',(-0.966586080176,-0.256342250925,0.)); +#447071 = ORIENTED_EDGE('',*,*,#447072,.T.); +#447072 = EDGE_CURVE('',#447064,#447073,#447075,.T.); +#447073 = VERTEX_POINT('',#447074); +#447074 = CARTESIAN_POINT('',(124.49585,-75.175312,1.585)); +#447075 = LINE('',#447076,#447077); +#447076 = CARTESIAN_POINT('',(124.443265,-75.175312,1.585)); +#447077 = VECTOR('',#447078,1.); +#447078 = DIRECTION('',(1.,0.,0.)); +#447079 = ORIENTED_EDGE('',*,*,#447080,.T.); +#447080 = EDGE_CURVE('',#447073,#447081,#447083,.T.); +#447081 = VERTEX_POINT('',#447082); +#447082 = CARTESIAN_POINT('',(124.554225,-75.146124,1.585)); +#447083 = LINE('',#447084,#447085); +#447084 = CARTESIAN_POINT('',(124.49585,-75.175312,1.585)); +#447085 = VECTOR('',#447086,1.); +#447086 = DIRECTION('',(0.894424126571,0.447219724306,0.)); +#447087 = ORIENTED_EDGE('',*,*,#447088,.T.); +#447088 = EDGE_CURVE('',#447081,#447089,#447091,.T.); +#447089 = VERTEX_POINT('',#447090); +#447090 = CARTESIAN_POINT('',(124.580845,-75.119503,1.585)); +#447091 = LINE('',#447092,#447093); +#447092 = CARTESIAN_POINT('',(124.554225,-75.146124,1.585)); +#447093 = VECTOR('',#447094,1.); +#447094 = DIRECTION('',(0.707093499816,0.707120062307,0.)); +#447095 = ORIENTED_EDGE('',*,*,#447096,.T.); +#447096 = EDGE_CURVE('',#447089,#447097,#447099,.T.); +#447097 = VERTEX_POINT('',#447098); +#447098 = CARTESIAN_POINT('',(124.612858,-75.055479,1.585)); +#447099 = LINE('',#447100,#447101); +#447100 = CARTESIAN_POINT('',(124.580845,-75.119503,1.585)); +#447101 = VECTOR('',#447102,1.); +#447102 = DIRECTION('',(0.447224771544,0.894421602891,0.)); +#447103 = ORIENTED_EDGE('',*,*,#447104,.T.); +#447104 = EDGE_CURVE('',#447097,#447105,#447107,.T.); +#447105 = VERTEX_POINT('',#447106); +#447106 = CARTESIAN_POINT('',(124.653408,-74.898189,1.585)); +#447107 = LINE('',#447108,#447109); +#447108 = CARTESIAN_POINT('',(124.612858,-75.055479,1.585)); +#447109 = VECTOR('',#447110,1.); +#447110 = DIRECTION('',(0.249641546197,0.968338318158,0.)); +#447111 = ORIENTED_EDGE('',*,*,#447112,.T.); +#447112 = EDGE_CURVE('',#447105,#447113,#447115,.T.); +#447113 = VERTEX_POINT('',#447114); +#447114 = CARTESIAN_POINT('',(124.700869,-74.809005,1.585)); +#447115 = LINE('',#447116,#447117); +#447116 = CARTESIAN_POINT('',(124.653408,-74.898189,1.585)); +#447117 = VECTOR('',#447118,1.); +#447118 = DIRECTION('',(0.469788120768,0.88277920319,0.)); +#447119 = ORIENTED_EDGE('',*,*,#447120,.T.); +#447120 = EDGE_CURVE('',#447113,#447121,#447123,.T.); +#447121 = VERTEX_POINT('',#447122); +#447122 = CARTESIAN_POINT('',(124.751958,-74.761544,1.585)); +#447123 = LINE('',#447124,#447125); +#447124 = CARTESIAN_POINT('',(124.700869,-74.809005,1.585)); +#447125 = VECTOR('',#447126,1.); +#447126 = DIRECTION('',(0.732641778434,0.680614446285,0.)); +#447127 = ORIENTED_EDGE('',*,*,#447128,.T.); +#447128 = EDGE_CURVE('',#447121,#447129,#447131,.T.); +#447129 = VERTEX_POINT('',#447130); +#447130 = CARTESIAN_POINT('',(124.949061,-74.723448,1.585)); +#447131 = CIRCLE('',#447132,0.222486586924); +#447132 = AXIS2_PLACEMENT_3D('',#447133,#447134,#447135); +#447133 = CARTESIAN_POINT('',(124.88818926467,-74.93744546073,1.585)); +#447134 = DIRECTION('',(0.,0.,-1.)); +#447135 = DIRECTION('',(-0.612312259155,0.790616023926,0.)); +#447136 = ORIENTED_EDGE('',*,*,#447137,.T.); +#447137 = EDGE_CURVE('',#447129,#447138,#447140,.T.); +#447138 = VERTEX_POINT('',#447139); +#447139 = CARTESIAN_POINT('',(125.038246,-74.77091,1.585)); +#447140 = LINE('',#447141,#447142); +#447141 = CARTESIAN_POINT('',(124.949061,-74.723448,1.585)); +#447142 = VECTOR('',#447143,1.); +#447143 = DIRECTION('',(0.882777282737,-0.469791729475,0.)); +#447144 = ORIENTED_EDGE('',*,*,#447145,.T.); +#447145 = EDGE_CURVE('',#447138,#447146,#447148,.T.); +#447146 = VERTEX_POINT('',#447147); +#447147 = CARTESIAN_POINT('',(125.085707,-74.821999,1.585)); +#447148 = LINE('',#447149,#447150); +#447149 = CARTESIAN_POINT('',(125.038246,-74.77091,1.585)); +#447150 = VECTOR('',#447151,1.); +#447151 = DIRECTION('',(0.680614446285,-0.732641778434,0.)); +#447152 = ORIENTED_EDGE('',*,*,#447153,.T.); +#447153 = EDGE_CURVE('',#447146,#447154,#447156,.T.); +#447154 = VERTEX_POINT('',#447155); +#447155 = CARTESIAN_POINT('',(125.126838,-74.909277,1.585)); +#447156 = LINE('',#447157,#447158); +#447157 = CARTESIAN_POINT('',(125.085707,-74.821999,1.585)); +#447158 = VECTOR('',#447159,1.); +#447159 = DIRECTION('',(0.426297603345,-0.904582972083,0.)); +#447160 = ORIENTED_EDGE('',*,*,#447161,.T.); +#447161 = EDGE_CURVE('',#447154,#447162,#447164,.T.); +#447162 = VERTEX_POINT('',#447163); +#447163 = CARTESIAN_POINT('',(125.126515,-75.126838,1.585)); +#447164 = LINE('',#447165,#447166); +#447165 = CARTESIAN_POINT('',(125.126838,-74.909277,1.585)); +#447166 = VECTOR('',#447167,1.); +#447167 = DIRECTION('',(-1.484639453016E-03,-0.999998897922,0.)); +#447168 = ORIENTED_EDGE('',*,*,#447169,.T.); +#447169 = EDGE_CURVE('',#447162,#447170,#447172,.T.); +#447170 = VERTEX_POINT('',#447171); +#447171 = CARTESIAN_POINT('',(125.08842,-75.241123,1.585)); +#447172 = LINE('',#447173,#447174); +#447173 = CARTESIAN_POINT('',(125.126515,-75.126838,1.585)); +#447174 = VECTOR('',#447175,1.); +#447175 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#447176 = ORIENTED_EDGE('',*,*,#447177,.T.); +#447177 = EDGE_CURVE('',#447170,#447178,#447180,.T.); +#447178 = VERTEX_POINT('',#447179); +#447179 = CARTESIAN_POINT('',(124.993552,-75.209501,1.585)); +#447180 = CIRCLE('',#447181,4.999972076924E-02); +#447181 = AXIS2_PLACEMENT_3D('',#447182,#447183,#447184); +#447182 = CARTESIAN_POINT('',(125.04098598721,-75.22531203835,1.585)); +#447183 = DIRECTION('',(-0.,0.,-1.)); +#447184 = DIRECTION('',(0.948685553724,-0.316220998917,-0.)); +#447185 = ORIENTED_EDGE('',*,*,#447186,.T.); +#447186 = EDGE_CURVE('',#447178,#447187,#447189,.T.); +#447187 = VERTEX_POINT('',#447188); +#447188 = CARTESIAN_POINT('',(125.029081,-75.102914,1.585)); +#447189 = LINE('',#447190,#447191); +#447190 = CARTESIAN_POINT('',(124.993552,-75.209501,1.585)); +#447191 = VECTOR('',#447192,1.); +#447192 = DIRECTION('',(0.316227766017,0.94868329805,0.)); +#447193 = ORIENTED_EDGE('',*,*,#447194,.T.); +#447194 = EDGE_CURVE('',#447187,#447195,#447197,.T.); +#447195 = VERTEX_POINT('',#447196); +#447196 = CARTESIAN_POINT('',(125.029081,-74.932353,1.585)); +#447197 = LINE('',#447198,#447199); +#447198 = CARTESIAN_POINT('',(125.029081,-75.102914,1.585)); +#447199 = VECTOR('',#447200,1.); +#447200 = DIRECTION('',(0.,1.,0.)); +#447201 = ORIENTED_EDGE('',*,*,#447202,.T.); +#447202 = EDGE_CURVE('',#447195,#447203,#447205,.T.); +#447203 = VERTEX_POINT('',#447204); +#447204 = CARTESIAN_POINT('',(124.914897,-74.818169,1.585)); +#447205 = CIRCLE('',#447206,0.160774606049); +#447206 = AXIS2_PLACEMENT_3D('',#447207,#447208,#447209); +#447207 = CARTESIAN_POINT('',(124.87367958788,-74.97357041211,1.585)); +#447208 = DIRECTION('',(0.,0.,1.)); +#447209 = DIRECTION('',(0.966579336984,0.256367676036,-0.)); +#447210 = ORIENTED_EDGE('',*,*,#447211,.T.); +#447211 = EDGE_CURVE('',#447203,#447212,#447214,.T.); +#447212 = VERTEX_POINT('',#447213); +#447213 = CARTESIAN_POINT('',(124.862313,-74.818169,1.585)); +#447214 = LINE('',#447215,#447216); +#447215 = CARTESIAN_POINT('',(124.914897,-74.818169,1.585)); +#447216 = VECTOR('',#447217,1.); +#447217 = DIRECTION('',(-1.,0.,0.)); +#447218 = ORIENTED_EDGE('',*,*,#447219,.T.); +#447219 = EDGE_CURVE('',#447212,#447220,#447222,.T.); +#447220 = VERTEX_POINT('',#447221); +#447221 = CARTESIAN_POINT('',(124.803937,-74.847357,1.585)); +#447222 = LINE('',#447223,#447224); +#447223 = CARTESIAN_POINT('',(124.862313,-74.818169,1.585)); +#447224 = VECTOR('',#447225,1.); +#447225 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#447226 = ORIENTED_EDGE('',*,*,#447227,.T.); +#447227 = EDGE_CURVE('',#447220,#447228,#447230,.T.); +#447228 = VERTEX_POINT('',#447229); +#447229 = CARTESIAN_POINT('',(124.777316,-74.873977,1.585)); +#447230 = LINE('',#447231,#447232); +#447231 = CARTESIAN_POINT('',(124.803937,-74.847357,1.585)); +#447232 = VECTOR('',#447233,1.); +#447233 = DIRECTION('',(-0.707120062307,-0.707093499816,0.)); +#447234 = ORIENTED_EDGE('',*,*,#447235,.T.); +#447235 = EDGE_CURVE('',#447228,#447236,#447238,.T.); +#447236 = VERTEX_POINT('',#447237); +#447237 = CARTESIAN_POINT('',(124.745304,-74.938001,1.585)); +#447238 = LINE('',#447239,#447240); +#447239 = CARTESIAN_POINT('',(124.777316,-74.873977,1.585)); +#447240 = VECTOR('',#447241,1.); +#447241 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#447242 = ORIENTED_EDGE('',*,*,#447243,.T.); +#447243 = EDGE_CURVE('',#447236,#447244,#447246,.T.); +#447244 = VERTEX_POINT('',#447245); +#447245 = CARTESIAN_POINT('',(124.704755,-75.095292,1.585)); +#447246 = LINE('',#447247,#447248); +#447247 = CARTESIAN_POINT('',(124.745304,-74.938001,1.585)); +#447248 = VECTOR('',#447249,1.); +#447249 = DIRECTION('',(-0.249634285275,-0.968340190024,0.)); +#447250 = ORIENTED_EDGE('',*,*,#447251,.T.); +#447251 = EDGE_CURVE('',#447244,#447252,#447254,.T.); +#447252 = VERTEX_POINT('',#447253); +#447253 = CARTESIAN_POINT('',(124.657293,-75.184478,1.585)); +#447254 = LINE('',#447255,#447256); +#447255 = CARTESIAN_POINT('',(124.704755,-75.095292,1.585)); +#447256 = VECTOR('',#447257,1.); +#447257 = DIRECTION('',(-0.469787624481,-0.882779467299,0.)); +#447258 = ORIENTED_EDGE('',*,*,#447259,.T.); +#447259 = EDGE_CURVE('',#447252,#447260,#447262,.T.); +#447260 = VERTEX_POINT('',#447261); +#447261 = CARTESIAN_POINT('',(124.606204,-75.231938,1.585)); +#447262 = LINE('',#447263,#447264); +#447263 = CARTESIAN_POINT('',(124.657293,-75.184478,1.585)); +#447264 = VECTOR('',#447265,1.); +#447265 = DIRECTION('',(-0.732648929305,-0.680606748709,0.)); +#447266 = ORIENTED_EDGE('',*,*,#447267,.T.); +#447267 = EDGE_CURVE('',#447260,#447268,#447270,.T.); +#447268 = VERTEX_POINT('',#447269); +#447269 = CARTESIAN_POINT('',(124.518925,-75.273069,1.585)); +#447270 = LINE('',#447271,#447272); +#447271 = CARTESIAN_POINT('',(124.606204,-75.231938,1.585)); +#447272 = VECTOR('',#447273,1.); +#447273 = DIRECTION('',(-0.904584855573,-0.426293606647,0.)); +#447274 = ORIENTED_EDGE('',*,*,#447275,.T.); +#447275 = EDGE_CURVE('',#447268,#447276,#447278,.T.); +#447276 = VERTEX_POINT('',#447277); +#447277 = CARTESIAN_POINT('',(124.420189,-75.273069,1.585)); +#447278 = LINE('',#447279,#447280); +#447279 = CARTESIAN_POINT('',(124.518925,-75.273069,1.585)); +#447280 = VECTOR('',#447281,1.); +#447281 = DIRECTION('',(-1.,0.,0.)); +#447282 = ORIENTED_EDGE('',*,*,#447283,.T.); +#447283 = EDGE_CURVE('',#447276,#447284,#447286,.T.); +#447284 = VERTEX_POINT('',#447285); +#447285 = CARTESIAN_POINT('',(124.319916,-75.222572,1.585)); +#447286 = LINE('',#447287,#447288); +#447287 = CARTESIAN_POINT('',(124.420189,-75.273069,1.585)); +#447288 = VECTOR('',#447289,1.); +#447289 = DIRECTION('',(-0.893139102015,0.449780551439,0.)); +#447290 = ORIENTED_EDGE('',*,*,#447291,.T.); +#447291 = EDGE_CURVE('',#447284,#447292,#447294,.T.); +#447292 = VERTEX_POINT('',#447293); +#447293 = CARTESIAN_POINT('',(124.272456,-75.171483,1.585)); +#447294 = LINE('',#447295,#447296); +#447295 = CARTESIAN_POINT('',(124.319916,-75.222572,1.585)); +#447296 = VECTOR('',#447297,1.); +#447297 = DIRECTION('',(-0.680606748709,0.732648929305,0.)); +#447298 = ORIENTED_EDGE('',*,*,#447299,.T.); +#447299 = EDGE_CURVE('',#447292,#447300,#447302,.T.); +#447300 = VERTEX_POINT('',#447301); +#447301 = CARTESIAN_POINT('',(124.231323,-75.084203,1.585)); +#447302 = LINE('',#447303,#447304); +#447303 = CARTESIAN_POINT('',(124.272456,-75.171483,1.585)); +#447304 = VECTOR('',#447305,1.); +#447305 = DIRECTION('',(-0.426306571356,0.904578745726,0.)); +#447306 = ORIENTED_EDGE('',*,*,#447307,.T.); +#447307 = EDGE_CURVE('',#447300,#447308,#447310,.T.); +#447308 = VERTEX_POINT('',#447309); +#447309 = CARTESIAN_POINT('',(124.231647,-74.866643,1.585)); +#447310 = LINE('',#447311,#447312); +#447311 = CARTESIAN_POINT('',(124.231323,-75.084203,1.585)); +#447312 = VECTOR('',#447313,1.); +#447313 = DIRECTION('',(1.489242694894E-03,0.999998891077,0.)); +#447314 = ORIENTED_EDGE('',*,*,#447315,.T.); +#447315 = EDGE_CURVE('',#447308,#447037,#447316,.T.); +#447316 = LINE('',#447317,#447318); +#447317 = CARTESIAN_POINT('',(124.231647,-74.866643,1.585)); +#447318 = VECTOR('',#447319,1.); +#447319 = DIRECTION('',(0.316235236915,0.948680807718,0.)); +#447320 = PLANE('',#447321); +#447321 = AXIS2_PLACEMENT_3D('',#447322,#447323,#447324); +#447322 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447323 = DIRECTION('',(0.,0.,1.)); +#447324 = DIRECTION('',(1.,0.,-0.)); +#447325 = SHELL_BASED_SURFACE_MODEL('',(#447326)); +#447326 = OPEN_SHELL('',(#447327)); +#447327 = ADVANCED_FACE('',(#447328),#447615,.T.); +#447328 = FACE_BOUND('',#447329,.F.); +#447329 = EDGE_LOOP('',(#447330,#447341,#447349,#447357,#447366,#447374, + #447382,#447390,#447398,#447406,#447414,#447422,#447431,#447439, + #447447,#447455,#447463,#447471,#447480,#447488,#447496,#447505, + #447513,#447521,#447529,#447537,#447545,#447553,#447561,#447569, + #447577,#447585,#447593,#447601,#447609)); +#447330 = ORIENTED_EDGE('',*,*,#447331,.T.); +#447331 = EDGE_CURVE('',#447332,#447334,#447336,.T.); +#447332 = VERTEX_POINT('',#447333); +#447333 = CARTESIAN_POINT('',(125.557698,-74.752358,1.585)); +#447334 = VERTEX_POINT('',#447335); +#447335 = CARTESIAN_POINT('',(125.652566,-74.783981,1.585)); +#447336 = CIRCLE('',#447337,4.999987888243E-02); +#447337 = AXIS2_PLACEMENT_3D('',#447338,#447339,#447340); +#447338 = CARTESIAN_POINT('',(125.60513197079,-74.76816958761,1.585)); +#447339 = DIRECTION('',(0.,0.,-1.)); +#447340 = DIRECTION('',(-0.948681713962,0.316232518243,0.)); +#447341 = ORIENTED_EDGE('',*,*,#447342,.T.); +#447342 = EDGE_CURVE('',#447334,#447343,#447345,.T.); +#447343 = VERTEX_POINT('',#447344); +#447344 = CARTESIAN_POINT('',(125.617036,-74.890569,1.585)); +#447345 = LINE('',#447346,#447347); +#447346 = CARTESIAN_POINT('',(125.652566,-74.783981,1.585)); +#447347 = VECTOR('',#447348,1.); +#447348 = DIRECTION('',(-0.316233106284,-0.948681517945,0.)); +#447349 = ORIENTED_EDGE('',*,*,#447350,.T.); +#447350 = EDGE_CURVE('',#447343,#447351,#447353,.T.); +#447351 = VERTEX_POINT('',#447352); +#447352 = CARTESIAN_POINT('',(125.617036,-75.061127,1.585)); +#447353 = LINE('',#447354,#447355); +#447354 = CARTESIAN_POINT('',(125.617036,-74.890569,1.585)); +#447355 = VECTOR('',#447356,1.); +#447356 = DIRECTION('',(0.,-1.,0.)); +#447357 = ORIENTED_EDGE('',*,*,#447358,.T.); +#447358 = EDGE_CURVE('',#447351,#447359,#447361,.T.); +#447359 = VERTEX_POINT('',#447360); +#447360 = CARTESIAN_POINT('',(125.73122,-75.175312,1.585)); +#447361 = CIRCLE('',#447362,0.160769240404); +#447362 = AXIS2_PLACEMENT_3D('',#447363,#447364,#447365); +#447363 = CARTESIAN_POINT('',(125.77243330989,-75.01991505103,1.585)); +#447364 = DIRECTION('',(0.,0.,1.)); +#447365 = DIRECTION('',(-0.966586080176,-0.256342250925,0.)); +#447366 = ORIENTED_EDGE('',*,*,#447367,.T.); +#447367 = EDGE_CURVE('',#447359,#447368,#447370,.T.); +#447368 = VERTEX_POINT('',#447369); +#447369 = CARTESIAN_POINT('',(125.783805,-75.175312,1.585)); +#447370 = LINE('',#447371,#447372); +#447371 = CARTESIAN_POINT('',(125.73122,-75.175312,1.585)); +#447372 = VECTOR('',#447373,1.); +#447373 = DIRECTION('',(1.,0.,0.)); +#447374 = ORIENTED_EDGE('',*,*,#447375,.T.); +#447375 = EDGE_CURVE('',#447368,#447376,#447378,.T.); +#447376 = VERTEX_POINT('',#447377); +#447377 = CARTESIAN_POINT('',(125.84218,-75.146124,1.585)); +#447378 = LINE('',#447379,#447380); +#447379 = CARTESIAN_POINT('',(125.783805,-75.175312,1.585)); +#447380 = VECTOR('',#447381,1.); +#447381 = DIRECTION('',(0.894424126571,0.447219724306,0.)); +#447382 = ORIENTED_EDGE('',*,*,#447383,.T.); +#447383 = EDGE_CURVE('',#447376,#447384,#447386,.T.); +#447384 = VERTEX_POINT('',#447385); +#447385 = CARTESIAN_POINT('',(125.8688,-75.119503,1.585)); +#447386 = LINE('',#447387,#447388); +#447387 = CARTESIAN_POINT('',(125.84218,-75.146124,1.585)); +#447388 = VECTOR('',#447389,1.); +#447389 = DIRECTION('',(0.707093499816,0.707120062307,0.)); +#447390 = ORIENTED_EDGE('',*,*,#447391,.T.); +#447391 = EDGE_CURVE('',#447384,#447392,#447394,.T.); +#447392 = VERTEX_POINT('',#447393); +#447393 = CARTESIAN_POINT('',(125.900813,-75.055479,1.585)); +#447394 = LINE('',#447395,#447396); +#447395 = CARTESIAN_POINT('',(125.8688,-75.119503,1.585)); +#447396 = VECTOR('',#447397,1.); +#447397 = DIRECTION('',(0.447224771544,0.894421602891,0.)); +#447398 = ORIENTED_EDGE('',*,*,#447399,.T.); +#447399 = EDGE_CURVE('',#447392,#447400,#447402,.T.); +#447400 = VERTEX_POINT('',#447401); +#447401 = CARTESIAN_POINT('',(125.941363,-74.898189,1.585)); +#447402 = LINE('',#447403,#447404); +#447403 = CARTESIAN_POINT('',(125.900813,-75.055479,1.585)); +#447404 = VECTOR('',#447405,1.); +#447405 = DIRECTION('',(0.249641546197,0.968338318158,0.)); +#447406 = ORIENTED_EDGE('',*,*,#447407,.T.); +#447407 = EDGE_CURVE('',#447400,#447408,#447410,.T.); +#447408 = VERTEX_POINT('',#447409); +#447409 = CARTESIAN_POINT('',(125.988824,-74.809005,1.585)); +#447410 = LINE('',#447411,#447412); +#447411 = CARTESIAN_POINT('',(125.941363,-74.898189,1.585)); +#447412 = VECTOR('',#447413,1.); +#447413 = DIRECTION('',(0.469788120768,0.88277920319,0.)); +#447414 = ORIENTED_EDGE('',*,*,#447415,.T.); +#447415 = EDGE_CURVE('',#447408,#447416,#447418,.T.); +#447416 = VERTEX_POINT('',#447417); +#447417 = CARTESIAN_POINT('',(126.039913,-74.761544,1.585)); +#447418 = LINE('',#447419,#447420); +#447419 = CARTESIAN_POINT('',(125.988824,-74.809005,1.585)); +#447420 = VECTOR('',#447421,1.); +#447421 = DIRECTION('',(0.732641778434,0.680614446285,0.)); +#447422 = ORIENTED_EDGE('',*,*,#447423,.T.); +#447423 = EDGE_CURVE('',#447416,#447424,#447426,.T.); +#447424 = VERTEX_POINT('',#447425); +#447425 = CARTESIAN_POINT('',(126.237016,-74.723448,1.585)); +#447426 = CIRCLE('',#447427,0.222486586924); +#447427 = AXIS2_PLACEMENT_3D('',#447428,#447429,#447430); +#447428 = CARTESIAN_POINT('',(126.17614426467,-74.93744546073,1.585)); +#447429 = DIRECTION('',(0.,0.,-1.)); +#447430 = DIRECTION('',(-0.612312259155,0.790616023926,0.)); +#447431 = ORIENTED_EDGE('',*,*,#447432,.T.); +#447432 = EDGE_CURVE('',#447424,#447433,#447435,.T.); +#447433 = VERTEX_POINT('',#447434); +#447434 = CARTESIAN_POINT('',(126.326201,-74.77091,1.585)); +#447435 = LINE('',#447436,#447437); +#447436 = CARTESIAN_POINT('',(126.237016,-74.723448,1.585)); +#447437 = VECTOR('',#447438,1.); +#447438 = DIRECTION('',(0.882777282737,-0.469791729475,0.)); +#447439 = ORIENTED_EDGE('',*,*,#447440,.T.); +#447440 = EDGE_CURVE('',#447433,#447441,#447443,.T.); +#447441 = VERTEX_POINT('',#447442); +#447442 = CARTESIAN_POINT('',(126.373662,-74.821999,1.585)); +#447443 = LINE('',#447444,#447445); +#447444 = CARTESIAN_POINT('',(126.326201,-74.77091,1.585)); +#447445 = VECTOR('',#447446,1.); +#447446 = DIRECTION('',(0.680614446285,-0.732641778434,0.)); +#447447 = ORIENTED_EDGE('',*,*,#447448,.T.); +#447448 = EDGE_CURVE('',#447441,#447449,#447451,.T.); +#447449 = VERTEX_POINT('',#447450); +#447450 = CARTESIAN_POINT('',(126.414793,-74.909277,1.585)); +#447451 = LINE('',#447452,#447453); +#447452 = CARTESIAN_POINT('',(126.373662,-74.821999,1.585)); +#447453 = VECTOR('',#447454,1.); +#447454 = DIRECTION('',(0.426297603345,-0.904582972083,0.)); +#447455 = ORIENTED_EDGE('',*,*,#447456,.T.); +#447456 = EDGE_CURVE('',#447449,#447457,#447459,.T.); +#447457 = VERTEX_POINT('',#447458); +#447458 = CARTESIAN_POINT('',(126.41447,-75.126838,1.585)); +#447459 = LINE('',#447460,#447461); +#447460 = CARTESIAN_POINT('',(126.414793,-74.909277,1.585)); +#447461 = VECTOR('',#447462,1.); +#447462 = DIRECTION('',(-1.484639453016E-03,-0.999998897922,0.)); +#447463 = ORIENTED_EDGE('',*,*,#447464,.T.); +#447464 = EDGE_CURVE('',#447457,#447465,#447467,.T.); +#447465 = VERTEX_POINT('',#447466); +#447466 = CARTESIAN_POINT('',(126.376375,-75.241123,1.585)); +#447467 = LINE('',#447468,#447469); +#447468 = CARTESIAN_POINT('',(126.41447,-75.126838,1.585)); +#447469 = VECTOR('',#447470,1.); +#447470 = DIRECTION('',(-0.316227766017,-0.948683298051,0.)); +#447471 = ORIENTED_EDGE('',*,*,#447472,.T.); +#447472 = EDGE_CURVE('',#447465,#447473,#447475,.T.); +#447473 = VERTEX_POINT('',#447474); +#447474 = CARTESIAN_POINT('',(126.281507,-75.209501,1.585)); +#447475 = CIRCLE('',#447476,4.999972076923E-02); +#447476 = AXIS2_PLACEMENT_3D('',#447477,#447478,#447479); +#447477 = CARTESIAN_POINT('',(126.32894098721,-75.22531203835,1.585)); +#447478 = DIRECTION('',(-0.,0.,-1.)); +#447479 = DIRECTION('',(0.948685553724,-0.316220998917,-0.)); +#447480 = ORIENTED_EDGE('',*,*,#447481,.T.); +#447481 = EDGE_CURVE('',#447473,#447482,#447484,.T.); +#447482 = VERTEX_POINT('',#447483); +#447483 = CARTESIAN_POINT('',(126.317036,-75.102914,1.585)); +#447484 = LINE('',#447485,#447486); +#447485 = CARTESIAN_POINT('',(126.281507,-75.209501,1.585)); +#447486 = VECTOR('',#447487,1.); +#447487 = DIRECTION('',(0.316227766017,0.948683298051,0.)); +#447488 = ORIENTED_EDGE('',*,*,#447489,.T.); +#447489 = EDGE_CURVE('',#447482,#447490,#447492,.T.); +#447490 = VERTEX_POINT('',#447491); +#447491 = CARTESIAN_POINT('',(126.317036,-74.932353,1.585)); +#447492 = LINE('',#447493,#447494); +#447493 = CARTESIAN_POINT('',(126.317036,-75.102914,1.585)); +#447494 = VECTOR('',#447495,1.); +#447495 = DIRECTION('',(0.,1.,0.)); +#447496 = ORIENTED_EDGE('',*,*,#447497,.T.); +#447497 = EDGE_CURVE('',#447490,#447498,#447500,.T.); +#447498 = VERTEX_POINT('',#447499); +#447499 = CARTESIAN_POINT('',(126.202852,-74.818169,1.585)); +#447500 = CIRCLE('',#447501,0.160774606049); +#447501 = AXIS2_PLACEMENT_3D('',#447502,#447503,#447504); +#447502 = CARTESIAN_POINT('',(126.16163458788,-74.97357041211,1.585)); +#447503 = DIRECTION('',(0.,0.,1.)); +#447504 = DIRECTION('',(0.966579336984,0.256367676036,-0.)); +#447505 = ORIENTED_EDGE('',*,*,#447506,.T.); +#447506 = EDGE_CURVE('',#447498,#447507,#447509,.T.); +#447507 = VERTEX_POINT('',#447508); +#447508 = CARTESIAN_POINT('',(126.150268,-74.818169,1.585)); +#447509 = LINE('',#447510,#447511); +#447510 = CARTESIAN_POINT('',(126.202852,-74.818169,1.585)); +#447511 = VECTOR('',#447512,1.); +#447512 = DIRECTION('',(-1.,0.,0.)); +#447513 = ORIENTED_EDGE('',*,*,#447514,.T.); +#447514 = EDGE_CURVE('',#447507,#447515,#447517,.T.); +#447515 = VERTEX_POINT('',#447516); +#447516 = CARTESIAN_POINT('',(126.091892,-74.847357,1.585)); +#447517 = LINE('',#447518,#447519); +#447518 = CARTESIAN_POINT('',(126.150268,-74.818169,1.585)); +#447519 = VECTOR('',#447520,1.); +#447520 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#447521 = ORIENTED_EDGE('',*,*,#447522,.T.); +#447522 = EDGE_CURVE('',#447515,#447523,#447525,.T.); +#447523 = VERTEX_POINT('',#447524); +#447524 = CARTESIAN_POINT('',(126.065271,-74.873977,1.585)); +#447525 = LINE('',#447526,#447527); +#447526 = CARTESIAN_POINT('',(126.091892,-74.847357,1.585)); +#447527 = VECTOR('',#447528,1.); +#447528 = DIRECTION('',(-0.707120062307,-0.707093499816,0.)); +#447529 = ORIENTED_EDGE('',*,*,#447530,.T.); +#447530 = EDGE_CURVE('',#447523,#447531,#447533,.T.); +#447531 = VERTEX_POINT('',#447532); +#447532 = CARTESIAN_POINT('',(126.033259,-74.938001,1.585)); +#447533 = LINE('',#447534,#447535); +#447534 = CARTESIAN_POINT('',(126.065271,-74.873977,1.585)); +#447535 = VECTOR('',#447536,1.); +#447536 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#447537 = ORIENTED_EDGE('',*,*,#447538,.T.); +#447538 = EDGE_CURVE('',#447531,#447539,#447541,.T.); +#447539 = VERTEX_POINT('',#447540); +#447540 = CARTESIAN_POINT('',(125.99271,-75.095292,1.585)); +#447541 = LINE('',#447542,#447543); +#447542 = CARTESIAN_POINT('',(126.033259,-74.938001,1.585)); +#447543 = VECTOR('',#447544,1.); +#447544 = DIRECTION('',(-0.249634285275,-0.968340190024,0.)); +#447545 = ORIENTED_EDGE('',*,*,#447546,.T.); +#447546 = EDGE_CURVE('',#447539,#447547,#447549,.T.); +#447547 = VERTEX_POINT('',#447548); +#447548 = CARTESIAN_POINT('',(125.945248,-75.184478,1.585)); +#447549 = LINE('',#447550,#447551); +#447550 = CARTESIAN_POINT('',(125.99271,-75.095292,1.585)); +#447551 = VECTOR('',#447552,1.); +#447552 = DIRECTION('',(-0.469787624481,-0.882779467299,0.)); +#447553 = ORIENTED_EDGE('',*,*,#447554,.T.); +#447554 = EDGE_CURVE('',#447547,#447555,#447557,.T.); +#447555 = VERTEX_POINT('',#447556); +#447556 = CARTESIAN_POINT('',(125.894159,-75.231938,1.585)); +#447557 = LINE('',#447558,#447559); +#447558 = CARTESIAN_POINT('',(125.945248,-75.184478,1.585)); +#447559 = VECTOR('',#447560,1.); +#447560 = DIRECTION('',(-0.732648929305,-0.680606748709,0.)); +#447561 = ORIENTED_EDGE('',*,*,#447562,.T.); +#447562 = EDGE_CURVE('',#447555,#447563,#447565,.T.); +#447563 = VERTEX_POINT('',#447564); +#447564 = CARTESIAN_POINT('',(125.80688,-75.273069,1.585)); +#447565 = LINE('',#447566,#447567); +#447566 = CARTESIAN_POINT('',(125.894159,-75.231938,1.585)); +#447567 = VECTOR('',#447568,1.); +#447568 = DIRECTION('',(-0.904584855573,-0.426293606647,0.)); +#447569 = ORIENTED_EDGE('',*,*,#447570,.T.); +#447570 = EDGE_CURVE('',#447563,#447571,#447573,.T.); +#447571 = VERTEX_POINT('',#447572); +#447572 = CARTESIAN_POINT('',(125.708144,-75.273069,1.585)); +#447573 = LINE('',#447574,#447575); +#447574 = CARTESIAN_POINT('',(125.80688,-75.273069,1.585)); +#447575 = VECTOR('',#447576,1.); +#447576 = DIRECTION('',(-1.,0.,0.)); +#447577 = ORIENTED_EDGE('',*,*,#447578,.T.); +#447578 = EDGE_CURVE('',#447571,#447579,#447581,.T.); +#447579 = VERTEX_POINT('',#447580); +#447580 = CARTESIAN_POINT('',(125.607871,-75.222572,1.585)); +#447581 = LINE('',#447582,#447583); +#447582 = CARTESIAN_POINT('',(125.708144,-75.273069,1.585)); +#447583 = VECTOR('',#447584,1.); +#447584 = DIRECTION('',(-0.893139102015,0.449780551439,0.)); +#447585 = ORIENTED_EDGE('',*,*,#447586,.T.); +#447586 = EDGE_CURVE('',#447579,#447587,#447589,.T.); +#447587 = VERTEX_POINT('',#447588); +#447588 = CARTESIAN_POINT('',(125.560411,-75.171483,1.585)); +#447589 = LINE('',#447590,#447591); +#447590 = CARTESIAN_POINT('',(125.607871,-75.222572,1.585)); +#447591 = VECTOR('',#447592,1.); +#447592 = DIRECTION('',(-0.680606748709,0.732648929305,0.)); +#447593 = ORIENTED_EDGE('',*,*,#447594,.T.); +#447594 = EDGE_CURVE('',#447587,#447595,#447597,.T.); +#447595 = VERTEX_POINT('',#447596); +#447596 = CARTESIAN_POINT('',(125.519278,-75.084203,1.585)); +#447597 = LINE('',#447598,#447599); +#447598 = CARTESIAN_POINT('',(125.560411,-75.171483,1.585)); +#447599 = VECTOR('',#447600,1.); +#447600 = DIRECTION('',(-0.426306571356,0.904578745726,0.)); +#447601 = ORIENTED_EDGE('',*,*,#447602,.T.); +#447602 = EDGE_CURVE('',#447595,#447603,#447605,.T.); +#447603 = VERTEX_POINT('',#447604); +#447604 = CARTESIAN_POINT('',(125.519602,-74.866643,1.585)); +#447605 = LINE('',#447606,#447607); +#447606 = CARTESIAN_POINT('',(125.519278,-75.084203,1.585)); +#447607 = VECTOR('',#447608,1.); +#447608 = DIRECTION('',(1.489242694959E-03,0.999998891077,0.)); +#447609 = ORIENTED_EDGE('',*,*,#447610,.T.); +#447610 = EDGE_CURVE('',#447603,#447332,#447611,.T.); +#447611 = LINE('',#447612,#447613); +#447612 = CARTESIAN_POINT('',(125.519602,-74.866643,1.585)); +#447613 = VECTOR('',#447614,1.); +#447614 = DIRECTION('',(0.316235236915,0.948680807718,0.)); +#447615 = PLANE('',#447616); +#447616 = AXIS2_PLACEMENT_3D('',#447617,#447618,#447619); +#447617 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447618 = DIRECTION('',(0.,0.,1.)); +#447619 = DIRECTION('',(1.,0.,-0.)); +#447620 = SHELL_BASED_SURFACE_MODEL('',(#447621)); +#447621 = OPEN_SHELL('',(#447622)); +#447622 = ADVANCED_FACE('',(#447623),#447823,.T.); +#447623 = FACE_BOUND('',#447624,.F.); +#447624 = EDGE_LOOP('',(#447625,#447636,#447644,#447653,#447661,#447670, + #447678,#447687,#447695,#447703,#447711,#447719,#447727,#447735, + #447743,#447752,#447760,#447768,#447776,#447784,#447792,#447800, + #447808,#447817)); +#447625 = ORIENTED_EDGE('',*,*,#447626,.T.); +#447626 = EDGE_CURVE('',#447627,#447629,#447631,.T.); +#447627 = VERTEX_POINT('',#447628); +#447628 = CARTESIAN_POINT('',(122.984501,-75.171483,1.585)); +#447629 = VERTEX_POINT('',#447630); +#447630 = CARTESIAN_POINT('',(122.993867,-74.732814,1.585)); +#447631 = CIRCLE('',#447632,0.398411069451); +#447632 = AXIS2_PLACEMENT_3D('',#447633,#447634,#447635); +#447633 = CARTESIAN_POINT('',(123.32167675265,-74.95924753622,1.585)); +#447634 = DIRECTION('',(0.,0.,-1.)); +#447635 = DIRECTION('',(-0.846301166073,-0.532704736513,-0.)); +#447636 = ORIENTED_EDGE('',*,*,#447637,.T.); +#447637 = EDGE_CURVE('',#447629,#447638,#447640,.T.); +#447638 = VERTEX_POINT('',#447639); +#447639 = CARTESIAN_POINT('',(123.048182,-74.68388,1.585)); +#447640 = LINE('',#447641,#447642); +#447641 = CARTESIAN_POINT('',(122.993867,-74.732814,1.585)); +#447642 = VECTOR('',#447643,1.); +#447643 = DIRECTION('',(0.74295057302,0.669346282614,0.)); +#447644 = ORIENTED_EDGE('',*,*,#447645,.T.); +#447645 = EDGE_CURVE('',#447638,#447646,#447648,.T.); +#447646 = VERTEX_POINT('',#447647); +#447647 = CARTESIAN_POINT('',(123.113511,-74.749209,1.585)); +#447648 = CIRCLE('',#447649,5.000060920129E-02); +#447649 = AXIS2_PLACEMENT_3D('',#447650,#447651,#447652); +#447650 = CARTESIAN_POINT('',(123.0673165,-74.7300745,1.585)); +#447651 = DIRECTION('',(0.,0.,-1.)); +#447652 = DIRECTION('',(-0.382685337352,0.923878743438,0.)); +#447653 = ORIENTED_EDGE('',*,*,#447654,.T.); +#447654 = EDGE_CURVE('',#447646,#447655,#447657,.T.); +#447655 = VERTEX_POINT('',#447656); +#447656 = CARTESIAN_POINT('',(123.070314,-74.797786,1.585)); +#447657 = LINE('',#447658,#447659); +#447658 = CARTESIAN_POINT('',(123.113511,-74.749209,1.585)); +#447659 = VECTOR('',#447660,1.); +#447660 = DIRECTION('',(-0.664513733372,-0.747276052179,0.)); +#447661 = ORIENTED_EDGE('',*,*,#447662,.T.); +#447662 = EDGE_CURVE('',#447655,#447663,#447665,.T.); +#447663 = VERTEX_POINT('',#447664); +#447664 = CARTESIAN_POINT('',(123.070314,-75.119504,1.585)); +#447665 = CIRCLE('',#447666,0.296231214028); +#447666 = AXIS2_PLACEMENT_3D('',#447667,#447668,#447669); +#447667 = CARTESIAN_POINT('',(123.31906551111,-74.958645,1.585)); +#447668 = DIRECTION('',(0.,0.,1.)); +#447669 = DIRECTION('',(-0.839720796926,0.543018400434,0.)); +#447670 = ORIENTED_EDGE('',*,*,#447671,.T.); +#447671 = EDGE_CURVE('',#447663,#447672,#447674,.T.); +#447672 = VERTEX_POINT('',#447673); +#447673 = CARTESIAN_POINT('',(123.096935,-75.146124,1.585)); +#447674 = LINE('',#447675,#447676); +#447675 = CARTESIAN_POINT('',(123.070314,-75.119504,1.585)); +#447676 = VECTOR('',#447677,1.); +#447677 = DIRECTION('',(0.707120062307,-0.707093499816,0.)); +#447678 = ORIENTED_EDGE('',*,*,#447679,.T.); +#447679 = EDGE_CURVE('',#447672,#447680,#447682,.T.); +#447680 = VERTEX_POINT('',#447681); +#447681 = CARTESIAN_POINT('',(123.380557,-75.146123,1.585)); +#447682 = CIRCLE('',#447683,0.253934212108); +#447683 = AXIS2_PLACEMENT_3D('',#447684,#447685,#447686); +#447684 = CARTESIAN_POINT('',(123.23874525729,-74.93547634393,1.585)); +#447685 = DIRECTION('',(0.,0.,1.)); +#447686 = DIRECTION('',(-0.55845274301,-0.829536336651,0.)); +#447687 = ORIENTED_EDGE('',*,*,#447688,.T.); +#447688 = EDGE_CURVE('',#447680,#447689,#447691,.T.); +#447689 = VERTEX_POINT('',#447690); +#447690 = CARTESIAN_POINT('',(123.407177,-75.119502,1.585)); +#447691 = LINE('',#447692,#447693); +#447692 = CARTESIAN_POINT('',(123.380557,-75.146123,1.585)); +#447693 = VECTOR('',#447694,1.); +#447694 = DIRECTION('',(0.707093499817,0.707120062307,0.)); +#447695 = ORIENTED_EDGE('',*,*,#447696,.T.); +#447696 = EDGE_CURVE('',#447689,#447697,#447699,.T.); +#447697 = VERTEX_POINT('',#447698); +#447698 = CARTESIAN_POINT('',(123.436364,-75.061128,1.585)); +#447699 = LINE('',#447700,#447701); +#447700 = CARTESIAN_POINT('',(123.407177,-75.119502,1.585)); +#447701 = VECTOR('',#447702,1.); +#447702 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#447703 = ORIENTED_EDGE('',*,*,#447704,.T.); +#447704 = EDGE_CURVE('',#447697,#447705,#447707,.T.); +#447705 = VERTEX_POINT('',#447706); +#447706 = CARTESIAN_POINT('',(123.439712,-74.941812,1.585)); +#447707 = LINE('',#447708,#447709); +#447708 = CARTESIAN_POINT('',(123.436364,-75.061128,1.585)); +#447709 = VECTOR('',#447710,1.); +#447710 = DIRECTION('',(2.80489015441E-02,0.99960655216,0.)); +#447711 = ORIENTED_EDGE('',*,*,#447712,.T.); +#447712 = EDGE_CURVE('',#447705,#447713,#447715,.T.); +#447713 = VERTEX_POINT('',#447714); +#447714 = CARTESIAN_POINT('',(123.46723,-74.912452,1.585)); +#447715 = LINE('',#447716,#447717); +#447716 = CARTESIAN_POINT('',(123.439712,-74.941812,1.585)); +#447717 = VECTOR('',#447718,1.); +#447718 = DIRECTION('',(0.683848539364,0.729623995774,0.)); +#447719 = ORIENTED_EDGE('',*,*,#447720,.T.); +#447720 = EDGE_CURVE('',#447713,#447721,#447723,.T.); +#447721 = VERTEX_POINT('',#447722); +#447722 = CARTESIAN_POINT('',(123.506968,-74.913922,1.585)); +#447723 = LINE('',#447724,#447725); +#447724 = CARTESIAN_POINT('',(123.46723,-74.912452,1.585)); +#447725 = VECTOR('',#447726,1.); +#447726 = DIRECTION('',(0.999316486312,-3.696701481898E-02,0.)); +#447727 = ORIENTED_EDGE('',*,*,#447728,.T.); +#447728 = EDGE_CURVE('',#447721,#447729,#447731,.T.); +#447729 = VERTEX_POINT('',#447730); +#447730 = CARTESIAN_POINT('',(123.741126,-75.115123,1.585)); +#447731 = LINE('',#447732,#447733); +#447732 = CARTESIAN_POINT('',(123.506968,-74.913922,1.585)); +#447733 = VECTOR('',#447734,1.); +#447734 = DIRECTION('',(0.758465163657,-0.65171358396,0.)); +#447735 = ORIENTED_EDGE('',*,*,#447736,.T.); +#447736 = EDGE_CURVE('',#447729,#447737,#447739,.T.); +#447737 = VERTEX_POINT('',#447738); +#447738 = CARTESIAN_POINT('',(123.741126,-74.730074,1.585)); +#447739 = LINE('',#447740,#447741); +#447740 = CARTESIAN_POINT('',(123.741126,-75.115123,1.585)); +#447741 = VECTOR('',#447742,1.); +#447742 = DIRECTION('',(0.,1.,0.)); +#447743 = ORIENTED_EDGE('',*,*,#447744,.T.); +#447744 = EDGE_CURVE('',#447737,#447745,#447747,.T.); +#447745 = VERTEX_POINT('',#447746); +#447746 = CARTESIAN_POINT('',(123.841126,-74.730074,1.585)); +#447747 = CIRCLE('',#447748,5.000000000002E-02); +#447748 = AXIS2_PLACEMENT_3D('',#447749,#447750,#447751); +#447749 = CARTESIAN_POINT('',(123.791126,-74.73007404771,1.585)); +#447750 = DIRECTION('',(0.,0.,-1.)); +#447751 = DIRECTION('',(-1.,9.54236440975E-07,0.)); +#447752 = ORIENTED_EDGE('',*,*,#447753,.T.); +#447753 = EDGE_CURVE('',#447745,#447754,#447756,.T.); +#447754 = VERTEX_POINT('',#447755); +#447755 = CARTESIAN_POINT('',(123.838491,-75.241331,1.585)); +#447756 = LINE('',#447757,#447758); +#447757 = CARTESIAN_POINT('',(123.841126,-74.730074,1.585)); +#447758 = VECTOR('',#447759,1.); +#447759 = DIRECTION('',(-5.153895210223E-03,-0.999986718594,0.)); +#447760 = ORIENTED_EDGE('',*,*,#447761,.T.); +#447761 = EDGE_CURVE('',#447754,#447762,#447764,.T.); +#447762 = VERTEX_POINT('',#447763); +#447763 = CARTESIAN_POINT('',(123.81026,-75.271506,1.585)); +#447764 = LINE('',#447765,#447766); +#447765 = CARTESIAN_POINT('',(123.838491,-75.241331,1.585)); +#447766 = VECTOR('',#447767,1.); +#447767 = DIRECTION('',(-0.683192931206,-0.730237919278,0.)); +#447768 = ORIENTED_EDGE('',*,*,#447769,.T.); +#447769 = EDGE_CURVE('',#447762,#447770,#447772,.T.); +#447770 = VERTEX_POINT('',#447771); +#447771 = CARTESIAN_POINT('',(123.770523,-75.270037,1.585)); +#447772 = LINE('',#447773,#447774); +#447773 = CARTESIAN_POINT('',(123.81026,-75.271506,1.585)); +#447774 = VECTOR('',#447775,1.); +#447775 = DIRECTION('',(-0.999317380674,3.694282991194E-02,0.)); +#447776 = ORIENTED_EDGE('',*,*,#447777,.T.); +#447777 = EDGE_CURVE('',#447770,#447778,#447780,.T.); +#447778 = VERTEX_POINT('',#447779); +#447779 = CARTESIAN_POINT('',(123.536364,-75.068834,1.585)); +#447780 = LINE('',#447781,#447782); +#447781 = CARTESIAN_POINT('',(123.770523,-75.270037,1.585)); +#447782 = VECTOR('',#447783,1.); +#447783 = DIRECTION('',(-0.758463337214,0.651715709571,0.)); +#447784 = ORIENTED_EDGE('',*,*,#447785,.T.); +#447785 = EDGE_CURVE('',#447778,#447786,#447788,.T.); +#447786 = VERTEX_POINT('',#447787); +#447787 = CARTESIAN_POINT('',(123.531086,-75.095291,1.585)); +#447788 = LINE('',#447789,#447790); +#447789 = CARTESIAN_POINT('',(123.536364,-75.068834,1.585)); +#447790 = VECTOR('',#447791,1.); +#447791 = DIRECTION('',(-0.195638520537,-0.980676077654,0.)); +#447792 = ORIENTED_EDGE('',*,*,#447793,.T.); +#447793 = EDGE_CURVE('',#447786,#447794,#447796,.T.); +#447794 = VERTEX_POINT('',#447795); +#447795 = CARTESIAN_POINT('',(123.483624,-75.184478,1.585)); +#447796 = LINE('',#447797,#447798); +#447797 = CARTESIAN_POINT('',(123.531086,-75.095291,1.585)); +#447798 = VECTOR('',#447799,1.); +#447799 = DIRECTION('',(-0.469783519548,-0.882781651804,0.)); +#447800 = ORIENTED_EDGE('',*,*,#447801,.T.); +#447801 = EDGE_CURVE('',#447794,#447802,#447804,.T.); +#447802 = VERTEX_POINT('',#447803); +#447803 = CARTESIAN_POINT('',(123.432535,-75.231938,1.585)); +#447804 = LINE('',#447805,#447806); +#447805 = CARTESIAN_POINT('',(123.483624,-75.184478,1.585)); +#447806 = VECTOR('',#447807,1.); +#447807 = DIRECTION('',(-0.732648929305,-0.680606748709,0.)); +#447808 = ORIENTED_EDGE('',*,*,#447809,.T.); +#447809 = EDGE_CURVE('',#447802,#447810,#447812,.T.); +#447810 = VERTEX_POINT('',#447811); +#447811 = CARTESIAN_POINT('',(123.031961,-75.222572,1.585)); +#447812 = CIRCLE('',#447813,0.354713007527); +#447813 = AXIS2_PLACEMENT_3D('',#447814,#447815,#447816); +#447814 = CARTESIAN_POINT('',(123.23909032756,-74.93461582387,1.585)); +#447815 = DIRECTION('',(-0.,0.,-1.)); +#447816 = DIRECTION('',(0.545355451664,-0.838204886254,-0.)); +#447817 = ORIENTED_EDGE('',*,*,#447818,.T.); +#447818 = EDGE_CURVE('',#447810,#447627,#447819,.T.); +#447819 = LINE('',#447820,#447821); +#447820 = CARTESIAN_POINT('',(123.031961,-75.222572,1.585)); +#447821 = VECTOR('',#447822,1.); +#447822 = DIRECTION('',(-0.680606748709,0.732648929305,0.)); +#447823 = PLANE('',#447824); +#447824 = AXIS2_PLACEMENT_3D('',#447825,#447826,#447827); +#447825 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447826 = DIRECTION('',(0.,0.,1.)); +#447827 = DIRECTION('',(1.,0.,-0.)); +#447828 = SHELL_BASED_SURFACE_MODEL('',(#447829)); +#447829 = OPEN_SHELL('',(#447830)); +#447830 = ADVANCED_FACE('',(#447831),#447867,.T.); +#447831 = FACE_BOUND('',#447832,.F.); +#447832 = EDGE_LOOP('',(#447833,#447844,#447852,#447861)); +#447833 = ORIENTED_EDGE('',*,*,#447834,.T.); +#447834 = EDGE_CURVE('',#447835,#447837,#447839,.T.); +#447835 = VERTEX_POINT('',#447836); +#447836 = CARTESIAN_POINT('',(126.736359,-67.84,1.585)); +#447837 = VERTEX_POINT('',#447838); +#447838 = CARTESIAN_POINT('',(126.736359,-67.72,1.585)); +#447839 = CIRCLE('',#447840,6.000000000042E-02); +#447840 = AXIS2_PLACEMENT_3D('',#447841,#447842,#447843); +#447841 = CARTESIAN_POINT('',(126.73635877441,-67.78,1.585)); +#447842 = DIRECTION('',(0.,0.,-1.)); +#447843 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#447844 = ORIENTED_EDGE('',*,*,#447845,.T.); +#447845 = EDGE_CURVE('',#447837,#447846,#447848,.T.); +#447846 = VERTEX_POINT('',#447847); +#447847 = CARTESIAN_POINT('',(127.043641,-67.72,1.585)); +#447848 = LINE('',#447849,#447850); +#447849 = CARTESIAN_POINT('',(126.736359,-67.72,1.585)); +#447850 = VECTOR('',#447851,1.); +#447851 = DIRECTION('',(1.,0.,0.)); +#447852 = ORIENTED_EDGE('',*,*,#447853,.T.); +#447853 = EDGE_CURVE('',#447846,#447854,#447856,.T.); +#447854 = VERTEX_POINT('',#447855); +#447855 = CARTESIAN_POINT('',(127.043641,-67.84,1.585)); +#447856 = CIRCLE('',#447857,6.000000000042E-02); +#447857 = AXIS2_PLACEMENT_3D('',#447858,#447859,#447860); +#447858 = CARTESIAN_POINT('',(127.04364122558,-67.78,1.585)); +#447859 = DIRECTION('',(0.,0.,-1.)); +#447860 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#447861 = ORIENTED_EDGE('',*,*,#447862,.T.); +#447862 = EDGE_CURVE('',#447854,#447835,#447863,.T.); +#447863 = LINE('',#447864,#447865); +#447864 = CARTESIAN_POINT('',(127.043641,-67.84,1.585)); +#447865 = VECTOR('',#447866,1.); +#447866 = DIRECTION('',(-1.,0.,0.)); +#447867 = PLANE('',#447868); +#447868 = AXIS2_PLACEMENT_3D('',#447869,#447870,#447871); +#447869 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447870 = DIRECTION('',(0.,0.,1.)); +#447871 = DIRECTION('',(1.,0.,-0.)); +#447872 = SHELL_BASED_SURFACE_MODEL('',(#447873)); +#447873 = OPEN_SHELL('',(#447874)); +#447874 = ADVANCED_FACE('',(#447875),#447911,.T.); +#447875 = FACE_BOUND('',#447876,.F.); +#447876 = EDGE_LOOP('',(#447877,#447888,#447896,#447905)); +#447877 = ORIENTED_EDGE('',*,*,#447878,.T.); +#447878 = EDGE_CURVE('',#447879,#447881,#447883,.T.); +#447879 = VERTEX_POINT('',#447880); +#447880 = CARTESIAN_POINT('',(126.736359,-67.08,1.585)); +#447881 = VERTEX_POINT('',#447882); +#447882 = CARTESIAN_POINT('',(126.736359,-66.96,1.585)); +#447883 = CIRCLE('',#447884,6.000000000043E-02); +#447884 = AXIS2_PLACEMENT_3D('',#447885,#447886,#447887); +#447885 = CARTESIAN_POINT('',(126.73635877441,-67.02,1.585)); +#447886 = DIRECTION('',(0.,0.,-1.)); +#447887 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#447888 = ORIENTED_EDGE('',*,*,#447889,.T.); +#447889 = EDGE_CURVE('',#447881,#447890,#447892,.T.); +#447890 = VERTEX_POINT('',#447891); +#447891 = CARTESIAN_POINT('',(127.043641,-66.96,1.585)); +#447892 = LINE('',#447893,#447894); +#447893 = CARTESIAN_POINT('',(126.736359,-66.96,1.585)); +#447894 = VECTOR('',#447895,1.); +#447895 = DIRECTION('',(1.,0.,0.)); +#447896 = ORIENTED_EDGE('',*,*,#447897,.T.); +#447897 = EDGE_CURVE('',#447890,#447898,#447900,.T.); +#447898 = VERTEX_POINT('',#447899); +#447899 = CARTESIAN_POINT('',(127.043641,-67.08,1.585)); +#447900 = CIRCLE('',#447901,6.000000000043E-02); +#447901 = AXIS2_PLACEMENT_3D('',#447902,#447903,#447904); +#447902 = CARTESIAN_POINT('',(127.04364122558,-67.02,1.585)); +#447903 = DIRECTION('',(0.,0.,-1.)); +#447904 = DIRECTION('',(-3.759794253683E-06,0.999999999993,-0.)); +#447905 = ORIENTED_EDGE('',*,*,#447906,.T.); +#447906 = EDGE_CURVE('',#447898,#447879,#447907,.T.); +#447907 = LINE('',#447908,#447909); +#447908 = CARTESIAN_POINT('',(127.043641,-67.08,1.585)); +#447909 = VECTOR('',#447910,1.); +#447910 = DIRECTION('',(-1.,0.,0.)); +#447911 = PLANE('',#447912); +#447912 = AXIS2_PLACEMENT_3D('',#447913,#447914,#447915); +#447913 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447914 = DIRECTION('',(0.,0.,1.)); +#447915 = DIRECTION('',(1.,0.,-0.)); +#447916 = SHELL_BASED_SURFACE_MODEL('',(#447917)); +#447917 = OPEN_SHELL('',(#447918)); +#447918 = ADVANCED_FACE('',(#447919),#447955,.T.); +#447919 = FACE_BOUND('',#447920,.F.); +#447920 = EDGE_LOOP('',(#447921,#447932,#447940,#447949)); +#447921 = ORIENTED_EDGE('',*,*,#447922,.T.); +#447922 = EDGE_CURVE('',#447923,#447925,#447927,.T.); +#447923 = VERTEX_POINT('',#447924); +#447924 = CARTESIAN_POINT('',(126.812164,-66.82,1.585)); +#447925 = VERTEX_POINT('',#447926); +#447926 = CARTESIAN_POINT('',(126.812164,-66.7,1.585)); +#447927 = CIRCLE('',#447928,6.000000000042E-02); +#447928 = AXIS2_PLACEMENT_3D('',#447929,#447930,#447931); +#447929 = CARTESIAN_POINT('',(126.81216377441,-66.76,1.585)); +#447930 = DIRECTION('',(0.,0.,-1.)); +#447931 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#447932 = ORIENTED_EDGE('',*,*,#447933,.T.); +#447933 = EDGE_CURVE('',#447925,#447934,#447936,.T.); +#447934 = VERTEX_POINT('',#447935); +#447935 = CARTESIAN_POINT('',(127.027836,-66.7,1.585)); +#447936 = LINE('',#447937,#447938); +#447937 = CARTESIAN_POINT('',(126.812164,-66.7,1.585)); +#447938 = VECTOR('',#447939,1.); +#447939 = DIRECTION('',(1.,0.,0.)); +#447940 = ORIENTED_EDGE('',*,*,#447941,.T.); +#447941 = EDGE_CURVE('',#447934,#447942,#447944,.T.); +#447942 = VERTEX_POINT('',#447943); +#447943 = CARTESIAN_POINT('',(127.027836,-66.82,1.585)); +#447944 = CIRCLE('',#447945,6.000000000042E-02); +#447945 = AXIS2_PLACEMENT_3D('',#447946,#447947,#447948); +#447946 = CARTESIAN_POINT('',(127.02783622558,-66.76,1.585)); +#447947 = DIRECTION('',(0.,0.,-1.)); +#447948 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#447949 = ORIENTED_EDGE('',*,*,#447950,.T.); +#447950 = EDGE_CURVE('',#447942,#447923,#447951,.T.); +#447951 = LINE('',#447952,#447953); +#447952 = CARTESIAN_POINT('',(127.027836,-66.82,1.585)); +#447953 = VECTOR('',#447954,1.); +#447954 = DIRECTION('',(-1.,0.,0.)); +#447955 = PLANE('',#447956); +#447956 = AXIS2_PLACEMENT_3D('',#447957,#447958,#447959); +#447957 = CARTESIAN_POINT('',(0.,0.,1.585)); +#447958 = DIRECTION('',(0.,0.,1.)); +#447959 = DIRECTION('',(1.,0.,-0.)); +#447960 = SHELL_BASED_SURFACE_MODEL('',(#447961)); +#447961 = OPEN_SHELL('',(#447962)); +#447962 = ADVANCED_FACE('',(#447963),#447999,.T.); +#447963 = FACE_BOUND('',#447964,.F.); +#447964 = EDGE_LOOP('',(#447965,#447976,#447984,#447993)); +#447965 = ORIENTED_EDGE('',*,*,#447966,.T.); +#447966 = EDGE_CURVE('',#447967,#447969,#447971,.T.); +#447967 = VERTEX_POINT('',#447968); +#447968 = CARTESIAN_POINT('',(126.812164,-66.1,1.585)); +#447969 = VERTEX_POINT('',#447970); +#447970 = CARTESIAN_POINT('',(126.812164,-65.98,1.585)); +#447971 = CIRCLE('',#447972,6.000000000042E-02); +#447972 = AXIS2_PLACEMENT_3D('',#447973,#447974,#447975); +#447973 = CARTESIAN_POINT('',(126.81216377441,-66.04,1.585)); +#447974 = DIRECTION('',(0.,0.,-1.)); +#447975 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#447976 = ORIENTED_EDGE('',*,*,#447977,.T.); +#447977 = EDGE_CURVE('',#447969,#447978,#447980,.T.); +#447978 = VERTEX_POINT('',#447979); +#447979 = CARTESIAN_POINT('',(127.027836,-65.98,1.585)); +#447980 = LINE('',#447981,#447982); +#447981 = CARTESIAN_POINT('',(126.812164,-65.98,1.585)); +#447982 = VECTOR('',#447983,1.); +#447983 = DIRECTION('',(1.,0.,0.)); +#447984 = ORIENTED_EDGE('',*,*,#447985,.T.); +#447985 = EDGE_CURVE('',#447978,#447986,#447988,.T.); +#447986 = VERTEX_POINT('',#447987); +#447987 = CARTESIAN_POINT('',(127.027836,-66.1,1.585)); +#447988 = CIRCLE('',#447989,6.000000000042E-02); +#447989 = AXIS2_PLACEMENT_3D('',#447990,#447991,#447992); +#447990 = CARTESIAN_POINT('',(127.02783622558,-66.04,1.585)); +#447991 = DIRECTION('',(0.,0.,-1.)); +#447992 = DIRECTION('',(-3.759794490532E-06,0.999999999993,-0.)); +#447993 = ORIENTED_EDGE('',*,*,#447994,.T.); +#447994 = EDGE_CURVE('',#447986,#447967,#447995,.T.); +#447995 = LINE('',#447996,#447997); +#447996 = CARTESIAN_POINT('',(127.027836,-66.1,1.585)); +#447997 = VECTOR('',#447998,1.); +#447998 = DIRECTION('',(-1.,0.,0.)); +#447999 = PLANE('',#448000); +#448000 = AXIS2_PLACEMENT_3D('',#448001,#448002,#448003); +#448001 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448002 = DIRECTION('',(0.,0.,1.)); +#448003 = DIRECTION('',(1.,0.,-0.)); +#448004 = SHELL_BASED_SURFACE_MODEL('',(#448005)); +#448005 = OPEN_SHELL('',(#448006)); +#448006 = ADVANCED_FACE('',(#448007),#448043,.T.); +#448007 = FACE_BOUND('',#448008,.F.); +#448008 = EDGE_LOOP('',(#448009,#448020,#448028,#448037)); +#448009 = ORIENTED_EDGE('',*,*,#448010,.T.); +#448010 = EDGE_CURVE('',#448011,#448013,#448015,.T.); +#448011 = VERTEX_POINT('',#448012); +#448012 = CARTESIAN_POINT('',(125.23442,-65.27,1.585)); +#448013 = VERTEX_POINT('',#448014); +#448014 = CARTESIAN_POINT('',(125.23442,-65.15,1.585)); +#448015 = CIRCLE('',#448016,6.000000000042E-02); +#448016 = AXIS2_PLACEMENT_3D('',#448017,#448018,#448019); +#448017 = CARTESIAN_POINT('',(125.23441977441,-65.21,1.585)); +#448018 = DIRECTION('',(0.,0.,-1.)); +#448019 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#448020 = ORIENTED_EDGE('',*,*,#448021,.T.); +#448021 = EDGE_CURVE('',#448013,#448022,#448024,.T.); +#448022 = VERTEX_POINT('',#448023); +#448023 = CARTESIAN_POINT('',(125.51558,-65.15,1.585)); +#448024 = LINE('',#448025,#448026); +#448025 = CARTESIAN_POINT('',(125.23442,-65.15,1.585)); +#448026 = VECTOR('',#448027,1.); +#448027 = DIRECTION('',(1.,0.,0.)); +#448028 = ORIENTED_EDGE('',*,*,#448029,.T.); +#448029 = EDGE_CURVE('',#448022,#448030,#448032,.T.); +#448030 = VERTEX_POINT('',#448031); +#448031 = CARTESIAN_POINT('',(125.51558,-65.27,1.585)); +#448032 = CIRCLE('',#448033,6.000000000042E-02); +#448033 = AXIS2_PLACEMENT_3D('',#448034,#448035,#448036); +#448034 = CARTESIAN_POINT('',(125.51558022558,-65.21,1.585)); +#448035 = DIRECTION('',(0.,0.,-1.)); +#448036 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#448037 = ORIENTED_EDGE('',*,*,#448038,.T.); +#448038 = EDGE_CURVE('',#448030,#448011,#448039,.T.); +#448039 = LINE('',#448040,#448041); +#448040 = CARTESIAN_POINT('',(125.51558,-65.27,1.585)); +#448041 = VECTOR('',#448042,1.); +#448042 = DIRECTION('',(-1.,0.,0.)); +#448043 = PLANE('',#448044); +#448044 = AXIS2_PLACEMENT_3D('',#448045,#448046,#448047); +#448045 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448046 = DIRECTION('',(0.,0.,1.)); +#448047 = DIRECTION('',(1.,0.,-0.)); +#448048 = SHELL_BASED_SURFACE_MODEL('',(#448049)); +#448049 = OPEN_SHELL('',(#448050)); +#448050 = ADVANCED_FACE('',(#448051),#448095,.T.); +#448051 = FACE_BOUND('',#448052,.F.); +#448052 = EDGE_LOOP('',(#448053,#448064,#448072,#448081,#448089)); +#448053 = ORIENTED_EDGE('',*,*,#448054,.T.); +#448054 = EDGE_CURVE('',#448055,#448057,#448059,.T.); +#448055 = VERTEX_POINT('',#448056); +#448056 = CARTESIAN_POINT('',(127.084567,-64.749203,1.585)); +#448057 = VERTEX_POINT('',#448058); +#448058 = CARTESIAN_POINT('',(127.2,-64.772164,1.585)); +#448059 = CIRCLE('',#448060,6.000007318648E-02); +#448060 = AXIS2_PLACEMENT_3D('',#448061,#448062,#448063); +#448061 = CARTESIAN_POINT('',(127.13999992681,-64.77216382331,1.585)); +#448062 = DIRECTION('',(0.,0.,-1.)); +#448063 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#448064 = ORIENTED_EDGE('',*,*,#448065,.T.); +#448065 = EDGE_CURVE('',#448057,#448066,#448068,.T.); +#448066 = VERTEX_POINT('',#448067); +#448067 = CARTESIAN_POINT('',(127.2,-64.987836,1.585)); +#448068 = LINE('',#448069,#448070); +#448069 = CARTESIAN_POINT('',(127.2,-64.772164,1.585)); +#448070 = VECTOR('',#448071,1.); +#448071 = DIRECTION('',(0.,-1.,0.)); +#448072 = ORIENTED_EDGE('',*,*,#448073,.T.); +#448073 = EDGE_CURVE('',#448066,#448074,#448076,.T.); +#448074 = VERTEX_POINT('',#448075); +#448075 = CARTESIAN_POINT('',(127.08,-64.987836,1.585)); +#448076 = CIRCLE('',#448077,6.000000000043E-02); +#448077 = AXIS2_PLACEMENT_3D('',#448078,#448079,#448080); +#448078 = CARTESIAN_POINT('',(127.14,-64.98783622558,1.585)); +#448079 = DIRECTION('',(0.,0.,-1.)); +#448080 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#448081 = ORIENTED_EDGE('',*,*,#448082,.T.); +#448082 = EDGE_CURVE('',#448074,#448083,#448085,.T.); +#448083 = VERTEX_POINT('',#448084); +#448084 = CARTESIAN_POINT('',(127.08,-64.772164,1.585)); +#448085 = LINE('',#448086,#448087); +#448086 = CARTESIAN_POINT('',(127.08,-64.987836,1.585)); +#448087 = VECTOR('',#448088,1.); +#448088 = DIRECTION('',(0.,1.,0.)); +#448089 = ORIENTED_EDGE('',*,*,#448090,.T.); +#448090 = EDGE_CURVE('',#448083,#448055,#448091,.T.); +#448091 = LINE('',#448092,#448093); +#448092 = CARTESIAN_POINT('',(127.08,-64.772164,1.585)); +#448093 = VECTOR('',#448094,1.); +#448094 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448095 = PLANE('',#448096); +#448096 = AXIS2_PLACEMENT_3D('',#448097,#448098,#448099); +#448097 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448098 = DIRECTION('',(0.,0.,1.)); +#448099 = DIRECTION('',(1.,0.,-0.)); +#448100 = SHELL_BASED_SURFACE_MODEL('',(#448101)); +#448101 = OPEN_SHELL('',(#448102)); +#448102 = ADVANCED_FACE('',(#448103),#448147,.T.); +#448103 = FACE_BOUND('',#448104,.F.); +#448104 = EDGE_LOOP('',(#448105,#448116,#448124,#448133,#448141)); +#448105 = ORIENTED_EDGE('',*,*,#448106,.T.); +#448106 = EDGE_CURVE('',#448107,#448109,#448111,.T.); +#448107 = VERTEX_POINT('',#448108); +#448108 = CARTESIAN_POINT('',(127.804567,-64.749203,1.585)); +#448109 = VERTEX_POINT('',#448110); +#448110 = CARTESIAN_POINT('',(127.92,-64.772164,1.585)); +#448111 = CIRCLE('',#448112,6.000007318648E-02); +#448112 = AXIS2_PLACEMENT_3D('',#448113,#448114,#448115); +#448113 = CARTESIAN_POINT('',(127.85999992681,-64.77216382331,1.585)); +#448114 = DIRECTION('',(0.,0.,-1.)); +#448115 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#448116 = ORIENTED_EDGE('',*,*,#448117,.T.); +#448117 = EDGE_CURVE('',#448109,#448118,#448120,.T.); +#448118 = VERTEX_POINT('',#448119); +#448119 = CARTESIAN_POINT('',(127.92,-64.987836,1.585)); +#448120 = LINE('',#448121,#448122); +#448121 = CARTESIAN_POINT('',(127.92,-64.772164,1.585)); +#448122 = VECTOR('',#448123,1.); +#448123 = DIRECTION('',(0.,-1.,0.)); +#448124 = ORIENTED_EDGE('',*,*,#448125,.T.); +#448125 = EDGE_CURVE('',#448118,#448126,#448128,.T.); +#448126 = VERTEX_POINT('',#448127); +#448127 = CARTESIAN_POINT('',(127.8,-64.987836,1.585)); +#448128 = CIRCLE('',#448129,6.000000000043E-02); +#448129 = AXIS2_PLACEMENT_3D('',#448130,#448131,#448132); +#448130 = CARTESIAN_POINT('',(127.86,-64.98783622558,1.585)); +#448131 = DIRECTION('',(0.,0.,-1.)); +#448132 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#448133 = ORIENTED_EDGE('',*,*,#448134,.T.); +#448134 = EDGE_CURVE('',#448126,#448135,#448137,.T.); +#448135 = VERTEX_POINT('',#448136); +#448136 = CARTESIAN_POINT('',(127.8,-64.772164,1.585)); +#448137 = LINE('',#448138,#448139); +#448138 = CARTESIAN_POINT('',(127.8,-64.987836,1.585)); +#448139 = VECTOR('',#448140,1.); +#448140 = DIRECTION('',(0.,1.,0.)); +#448141 = ORIENTED_EDGE('',*,*,#448142,.T.); +#448142 = EDGE_CURVE('',#448135,#448107,#448143,.T.); +#448143 = LINE('',#448144,#448145); +#448144 = CARTESIAN_POINT('',(127.8,-64.772164,1.585)); +#448145 = VECTOR('',#448146,1.); +#448146 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448147 = PLANE('',#448148); +#448148 = AXIS2_PLACEMENT_3D('',#448149,#448150,#448151); +#448149 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448150 = DIRECTION('',(0.,0.,1.)); +#448151 = DIRECTION('',(1.,0.,-0.)); +#448152 = SHELL_BASED_SURFACE_MODEL('',(#448153)); +#448153 = OPEN_SHELL('',(#448154)); +#448154 = ADVANCED_FACE('',(#448155),#448191,.T.); +#448155 = FACE_BOUND('',#448156,.F.); +#448156 = EDGE_LOOP('',(#448157,#448168,#448176,#448185)); +#448157 = ORIENTED_EDGE('',*,*,#448158,.T.); +#448158 = EDGE_CURVE('',#448159,#448161,#448163,.T.); +#448159 = VERTEX_POINT('',#448160); +#448160 = CARTESIAN_POINT('',(125.23442,-64.25,1.585)); +#448161 = VERTEX_POINT('',#448162); +#448162 = CARTESIAN_POINT('',(125.23442,-64.13,1.585)); +#448163 = CIRCLE('',#448164,6.000000000043E-02); +#448164 = AXIS2_PLACEMENT_3D('',#448165,#448166,#448167); +#448165 = CARTESIAN_POINT('',(125.23441977441,-64.19,1.585)); +#448166 = DIRECTION('',(0.,0.,-1.)); +#448167 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#448168 = ORIENTED_EDGE('',*,*,#448169,.T.); +#448169 = EDGE_CURVE('',#448161,#448170,#448172,.T.); +#448170 = VERTEX_POINT('',#448171); +#448171 = CARTESIAN_POINT('',(125.51558,-64.13,1.585)); +#448172 = LINE('',#448173,#448174); +#448173 = CARTESIAN_POINT('',(125.23442,-64.13,1.585)); +#448174 = VECTOR('',#448175,1.); +#448175 = DIRECTION('',(1.,0.,0.)); +#448176 = ORIENTED_EDGE('',*,*,#448177,.T.); +#448177 = EDGE_CURVE('',#448170,#448178,#448180,.T.); +#448178 = VERTEX_POINT('',#448179); +#448179 = CARTESIAN_POINT('',(125.51558,-64.25,1.585)); +#448180 = CIRCLE('',#448181,6.000000000042E-02); +#448181 = AXIS2_PLACEMENT_3D('',#448182,#448183,#448184); +#448182 = CARTESIAN_POINT('',(125.51558022558,-64.19,1.585)); +#448183 = DIRECTION('',(0.,0.,-1.)); +#448184 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#448185 = ORIENTED_EDGE('',*,*,#448186,.T.); +#448186 = EDGE_CURVE('',#448178,#448159,#448187,.T.); +#448187 = LINE('',#448188,#448189); +#448188 = CARTESIAN_POINT('',(125.51558,-64.25,1.585)); +#448189 = VECTOR('',#448190,1.); +#448190 = DIRECTION('',(-1.,0.,0.)); +#448191 = PLANE('',#448192); +#448192 = AXIS2_PLACEMENT_3D('',#448193,#448194,#448195); +#448193 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448194 = DIRECTION('',(0.,0.,1.)); +#448195 = DIRECTION('',(1.,0.,-0.)); +#448196 = SHELL_BASED_SURFACE_MODEL('',(#448197)); +#448197 = OPEN_SHELL('',(#448198)); +#448198 = ADVANCED_FACE('',(#448199),#448299,.T.); +#448199 = FACE_BOUND('',#448200,.F.); +#448200 = EDGE_LOOP('',(#448201,#448212,#448220,#448228,#448236,#448244, + #448252,#448260,#448268,#448277,#448285,#448293)); +#448201 = ORIENTED_EDGE('',*,*,#448202,.T.); +#448202 = EDGE_CURVE('',#448203,#448205,#448207,.T.); +#448203 = VERTEX_POINT('',#448204); +#448204 = CARTESIAN_POINT('',(129.06,-63.91,1.585)); +#448205 = VERTEX_POINT('',#448206); +#448206 = CARTESIAN_POINT('',(128.94,-63.91,1.585)); +#448207 = CIRCLE('',#448208,6.000000000043E-02); +#448208 = AXIS2_PLACEMENT_3D('',#448209,#448210,#448211); +#448209 = CARTESIAN_POINT('',(129.,-63.91000022558,1.585)); +#448210 = DIRECTION('',(0.,0.,-1.)); +#448211 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#448212 = ORIENTED_EDGE('',*,*,#448213,.T.); +#448213 = EDGE_CURVE('',#448205,#448214,#448216,.T.); +#448214 = VERTEX_POINT('',#448215); +#448215 = CARTESIAN_POINT('',(128.94,-60.,1.585)); +#448216 = LINE('',#448217,#448218); +#448217 = CARTESIAN_POINT('',(128.94,-63.91,1.585)); +#448218 = VECTOR('',#448219,1.); +#448219 = DIRECTION('',(0.,1.,0.)); +#448220 = ORIENTED_EDGE('',*,*,#448221,.T.); +#448221 = EDGE_CURVE('',#448214,#448222,#448224,.T.); +#448222 = VERTEX_POINT('',#448223); +#448223 = CARTESIAN_POINT('',(129.06,-60.,1.585)); +#448224 = LINE('',#448225,#448226); +#448225 = CARTESIAN_POINT('',(128.94,-60.,1.585)); +#448226 = VECTOR('',#448227,1.); +#448227 = DIRECTION('',(1.,0.,0.)); +#448228 = ORIENTED_EDGE('',*,*,#448229,.T.); +#448229 = EDGE_CURVE('',#448222,#448230,#448232,.T.); +#448230 = VERTEX_POINT('',#448231); +#448231 = CARTESIAN_POINT('',(129.06,-63.04,1.585)); +#448232 = LINE('',#448233,#448234); +#448233 = CARTESIAN_POINT('',(129.06,-60.,1.585)); +#448234 = VECTOR('',#448235,1.); +#448235 = DIRECTION('',(0.,-1.,0.)); +#448236 = ORIENTED_EDGE('',*,*,#448237,.T.); +#448237 = EDGE_CURVE('',#448230,#448238,#448240,.T.); +#448238 = VERTEX_POINT('',#448239); +#448239 = CARTESIAN_POINT('',(146.94,-63.04,1.585)); +#448240 = LINE('',#448241,#448242); +#448241 = CARTESIAN_POINT('',(129.06,-63.04,1.585)); +#448242 = VECTOR('',#448243,1.); +#448243 = DIRECTION('',(1.,0.,0.)); +#448244 = ORIENTED_EDGE('',*,*,#448245,.T.); +#448245 = EDGE_CURVE('',#448238,#448246,#448248,.T.); +#448246 = VERTEX_POINT('',#448247); +#448247 = CARTESIAN_POINT('',(146.94,-60.,1.585)); +#448248 = LINE('',#448249,#448250); +#448249 = CARTESIAN_POINT('',(146.94,-63.04,1.585)); +#448250 = VECTOR('',#448251,1.); +#448251 = DIRECTION('',(0.,1.,0.)); +#448252 = ORIENTED_EDGE('',*,*,#448253,.T.); +#448253 = EDGE_CURVE('',#448246,#448254,#448256,.T.); +#448254 = VERTEX_POINT('',#448255); +#448255 = CARTESIAN_POINT('',(147.06,-60.,1.585)); +#448256 = LINE('',#448257,#448258); +#448257 = CARTESIAN_POINT('',(146.94,-60.,1.585)); +#448258 = VECTOR('',#448259,1.); +#448259 = DIRECTION('',(1.,0.,0.)); +#448260 = ORIENTED_EDGE('',*,*,#448261,.T.); +#448261 = EDGE_CURVE('',#448254,#448262,#448264,.T.); +#448262 = VERTEX_POINT('',#448263); +#448263 = CARTESIAN_POINT('',(147.06,-63.91,1.585)); +#448264 = LINE('',#448265,#448266); +#448265 = CARTESIAN_POINT('',(147.06,-60.,1.585)); +#448266 = VECTOR('',#448267,1.); +#448267 = DIRECTION('',(0.,-1.,0.)); +#448268 = ORIENTED_EDGE('',*,*,#448269,.T.); +#448269 = EDGE_CURVE('',#448262,#448270,#448272,.T.); +#448270 = VERTEX_POINT('',#448271); +#448271 = CARTESIAN_POINT('',(146.94,-63.91,1.585)); +#448272 = CIRCLE('',#448273,6.000000000043E-02); +#448273 = AXIS2_PLACEMENT_3D('',#448274,#448275,#448276); +#448274 = CARTESIAN_POINT('',(147.,-63.91000022558,1.585)); +#448275 = DIRECTION('',(0.,0.,-1.)); +#448276 = DIRECTION('',(0.999999999993,3.75979413526E-06,0.)); +#448277 = ORIENTED_EDGE('',*,*,#448278,.T.); +#448278 = EDGE_CURVE('',#448270,#448279,#448281,.T.); +#448279 = VERTEX_POINT('',#448280); +#448280 = CARTESIAN_POINT('',(146.94,-63.16,1.585)); +#448281 = LINE('',#448282,#448283); +#448282 = CARTESIAN_POINT('',(146.94,-63.91,1.585)); +#448283 = VECTOR('',#448284,1.); +#448284 = DIRECTION('',(0.,1.,0.)); +#448285 = ORIENTED_EDGE('',*,*,#448286,.T.); +#448286 = EDGE_CURVE('',#448279,#448287,#448289,.T.); +#448287 = VERTEX_POINT('',#448288); +#448288 = CARTESIAN_POINT('',(129.06,-63.16,1.585)); +#448289 = LINE('',#448290,#448291); +#448290 = CARTESIAN_POINT('',(146.94,-63.16,1.585)); +#448291 = VECTOR('',#448292,1.); +#448292 = DIRECTION('',(-1.,0.,0.)); +#448293 = ORIENTED_EDGE('',*,*,#448294,.T.); +#448294 = EDGE_CURVE('',#448287,#448203,#448295,.T.); +#448295 = LINE('',#448296,#448297); +#448296 = CARTESIAN_POINT('',(129.06,-63.16,1.585)); +#448297 = VECTOR('',#448298,1.); +#448298 = DIRECTION('',(0.,-1.,0.)); +#448299 = PLANE('',#448300); +#448300 = AXIS2_PLACEMENT_3D('',#448301,#448302,#448303); +#448301 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448302 = DIRECTION('',(0.,0.,1.)); +#448303 = DIRECTION('',(1.,0.,-0.)); +#448304 = SHELL_BASED_SURFACE_MODEL('',(#448305)); +#448305 = OPEN_SHELL('',(#448306)); +#448306 = ADVANCED_FACE('',(#448307),#448376,.T.); +#448307 = FACE_BOUND('',#448308,.F.); +#448308 = EDGE_LOOP('',(#448309,#448320,#448328,#448336,#448345,#448353, + #448362,#448370)); +#448309 = ORIENTED_EDGE('',*,*,#448310,.T.); +#448310 = EDGE_CURVE('',#448311,#448313,#448315,.T.); +#448311 = VERTEX_POINT('',#448312); +#448312 = CARTESIAN_POINT('',(121.194567,-62.227039,1.585)); +#448313 = VERTEX_POINT('',#448314); +#448314 = CARTESIAN_POINT('',(121.31,-62.25,1.585)); +#448315 = CIRCLE('',#448316,6.000007318647E-02); +#448316 = AXIS2_PLACEMENT_3D('',#448317,#448318,#448319); +#448317 = CARTESIAN_POINT('',(121.24999992681,-62.24999982331,1.585)); +#448318 = DIRECTION('',(0.,0.,-1.)); +#448319 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#448320 = ORIENTED_EDGE('',*,*,#448321,.T.); +#448321 = EDGE_CURVE('',#448313,#448322,#448324,.T.); +#448322 = VERTEX_POINT('',#448323); +#448323 = CARTESIAN_POINT('',(121.31,-63.19,1.585)); +#448324 = LINE('',#448325,#448326); +#448325 = CARTESIAN_POINT('',(121.31,-62.25,1.585)); +#448326 = VECTOR('',#448327,1.); +#448327 = DIRECTION('',(0.,-1.,0.)); +#448328 = ORIENTED_EDGE('',*,*,#448329,.T.); +#448329 = EDGE_CURVE('',#448322,#448330,#448332,.T.); +#448330 = VERTEX_POINT('',#448331); +#448331 = CARTESIAN_POINT('',(121.85,-63.19,1.585)); +#448332 = LINE('',#448333,#448334); +#448333 = CARTESIAN_POINT('',(121.31,-63.19,1.585)); +#448334 = VECTOR('',#448335,1.); +#448335 = DIRECTION('',(1.,0.,0.)); +#448336 = ORIENTED_EDGE('',*,*,#448337,.T.); +#448337 = EDGE_CURVE('',#448330,#448338,#448340,.T.); +#448338 = VERTEX_POINT('',#448339); +#448339 = CARTESIAN_POINT('',(121.85,-63.31,1.585)); +#448340 = CIRCLE('',#448341,6.000000000043E-02); +#448341 = AXIS2_PLACEMENT_3D('',#448342,#448343,#448344); +#448342 = CARTESIAN_POINT('',(121.85000022558,-63.25,1.585)); +#448343 = DIRECTION('',(0.,0.,-1.)); +#448344 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#448345 = ORIENTED_EDGE('',*,*,#448346,.T.); +#448346 = EDGE_CURVE('',#448338,#448347,#448349,.T.); +#448347 = VERTEX_POINT('',#448348); +#448348 = CARTESIAN_POINT('',(121.25,-63.31,1.585)); +#448349 = LINE('',#448350,#448351); +#448350 = CARTESIAN_POINT('',(121.85,-63.31,1.585)); +#448351 = VECTOR('',#448352,1.); +#448352 = DIRECTION('',(-1.,0.,0.)); +#448353 = ORIENTED_EDGE('',*,*,#448354,.T.); +#448354 = EDGE_CURVE('',#448347,#448355,#448357,.T.); +#448355 = VERTEX_POINT('',#448356); +#448356 = CARTESIAN_POINT('',(121.19,-63.25,1.585)); +#448357 = CIRCLE('',#448358,5.999932016261E-02); +#448358 = AXIS2_PLACEMENT_3D('',#448359,#448360,#448361); +#448359 = CARTESIAN_POINT('',(121.24999932015,-63.25000067984,1.585)); +#448360 = DIRECTION('',(0.,0.,-1.)); +#448361 = DIRECTION('',(1.133081588457E-05,-0.999999999936,0.)); +#448362 = ORIENTED_EDGE('',*,*,#448363,.T.); +#448363 = EDGE_CURVE('',#448355,#448364,#448366,.T.); +#448364 = VERTEX_POINT('',#448365); +#448365 = CARTESIAN_POINT('',(121.19,-62.25,1.585)); +#448366 = LINE('',#448367,#448368); +#448367 = CARTESIAN_POINT('',(121.19,-63.25,1.585)); +#448368 = VECTOR('',#448369,1.); +#448369 = DIRECTION('',(0.,1.,0.)); +#448370 = ORIENTED_EDGE('',*,*,#448371,.T.); +#448371 = EDGE_CURVE('',#448364,#448311,#448372,.T.); +#448372 = LINE('',#448373,#448374); +#448373 = CARTESIAN_POINT('',(121.19,-62.25,1.585)); +#448374 = VECTOR('',#448375,1.); +#448375 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448376 = PLANE('',#448377); +#448377 = AXIS2_PLACEMENT_3D('',#448378,#448379,#448380); +#448378 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448379 = DIRECTION('',(0.,0.,1.)); +#448380 = DIRECTION('',(1.,0.,-0.)); +#448381 = SHELL_BASED_SURFACE_MODEL('',(#448382)); +#448382 = OPEN_SHELL('',(#448383)); +#448383 = ADVANCED_FACE('',(#448384),#448453,.T.); +#448384 = FACE_BOUND('',#448385,.F.); +#448385 = EDGE_LOOP('',(#448386,#448397,#448405,#448414,#448422,#448431, + #448439,#448447)); +#448386 = ORIENTED_EDGE('',*,*,#448387,.T.); +#448387 = EDGE_CURVE('',#448388,#448390,#448392,.T.); +#448388 = VERTEX_POINT('',#448389); +#448389 = CARTESIAN_POINT('',(125.994567,-62.227039,1.585)); +#448390 = VERTEX_POINT('',#448391); +#448391 = CARTESIAN_POINT('',(126.11,-62.25,1.585)); +#448392 = CIRCLE('',#448393,6.000007318647E-02); +#448393 = AXIS2_PLACEMENT_3D('',#448394,#448395,#448396); +#448394 = CARTESIAN_POINT('',(126.04999992681,-62.24999982331,1.585)); +#448395 = DIRECTION('',(0.,0.,-1.)); +#448396 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#448397 = ORIENTED_EDGE('',*,*,#448398,.T.); +#448398 = EDGE_CURVE('',#448390,#448399,#448401,.T.); +#448399 = VERTEX_POINT('',#448400); +#448400 = CARTESIAN_POINT('',(126.11,-63.25,1.585)); +#448401 = LINE('',#448402,#448403); +#448402 = CARTESIAN_POINT('',(126.11,-62.25,1.585)); +#448403 = VECTOR('',#448404,1.); +#448404 = DIRECTION('',(0.,-1.,0.)); +#448405 = ORIENTED_EDGE('',*,*,#448406,.T.); +#448406 = EDGE_CURVE('',#448399,#448407,#448409,.T.); +#448407 = VERTEX_POINT('',#448408); +#448408 = CARTESIAN_POINT('',(126.05,-63.31,1.585)); +#448409 = CIRCLE('',#448410,5.999932016257E-02); +#448410 = AXIS2_PLACEMENT_3D('',#448411,#448412,#448413); +#448411 = CARTESIAN_POINT('',(126.05000067984,-63.25000067984,1.585)); +#448412 = DIRECTION('',(0.,0.,-1.)); +#448413 = DIRECTION('',(0.999999999936,1.133081635828E-05,0.)); +#448414 = ORIENTED_EDGE('',*,*,#448415,.T.); +#448415 = EDGE_CURVE('',#448407,#448416,#448418,.T.); +#448416 = VERTEX_POINT('',#448417); +#448417 = CARTESIAN_POINT('',(125.45,-63.31,1.585)); +#448418 = LINE('',#448419,#448420); +#448419 = CARTESIAN_POINT('',(126.05,-63.31,1.585)); +#448420 = VECTOR('',#448421,1.); +#448421 = DIRECTION('',(-1.,0.,0.)); +#448422 = ORIENTED_EDGE('',*,*,#448423,.T.); +#448423 = EDGE_CURVE('',#448416,#448424,#448426,.T.); +#448424 = VERTEX_POINT('',#448425); +#448425 = CARTESIAN_POINT('',(125.45,-63.19,1.585)); +#448426 = CIRCLE('',#448427,6.000000000043E-02); +#448427 = AXIS2_PLACEMENT_3D('',#448428,#448429,#448430); +#448428 = CARTESIAN_POINT('',(125.44999977441,-63.25,1.585)); +#448429 = DIRECTION('',(0.,0.,-1.)); +#448430 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#448431 = ORIENTED_EDGE('',*,*,#448432,.T.); +#448432 = EDGE_CURVE('',#448424,#448433,#448435,.T.); +#448433 = VERTEX_POINT('',#448434); +#448434 = CARTESIAN_POINT('',(125.99,-63.19,1.585)); +#448435 = LINE('',#448436,#448437); +#448436 = CARTESIAN_POINT('',(125.45,-63.19,1.585)); +#448437 = VECTOR('',#448438,1.); +#448438 = DIRECTION('',(1.,0.,0.)); +#448439 = ORIENTED_EDGE('',*,*,#448440,.T.); +#448440 = EDGE_CURVE('',#448433,#448441,#448443,.T.); +#448441 = VERTEX_POINT('',#448442); +#448442 = CARTESIAN_POINT('',(125.99,-62.25,1.585)); +#448443 = LINE('',#448444,#448445); +#448444 = CARTESIAN_POINT('',(125.99,-63.19,1.585)); +#448445 = VECTOR('',#448446,1.); +#448446 = DIRECTION('',(0.,1.,0.)); +#448447 = ORIENTED_EDGE('',*,*,#448448,.T.); +#448448 = EDGE_CURVE('',#448441,#448388,#448449,.T.); +#448449 = LINE('',#448450,#448451); +#448450 = CARTESIAN_POINT('',(125.99,-62.25,1.585)); +#448451 = VECTOR('',#448452,1.); +#448452 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448453 = PLANE('',#448454); +#448454 = AXIS2_PLACEMENT_3D('',#448455,#448456,#448457); +#448455 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448456 = DIRECTION('',(0.,0.,1.)); +#448457 = DIRECTION('',(1.,0.,-0.)); +#448458 = SHELL_BASED_SURFACE_MODEL('',(#448459)); +#448459 = OPEN_SHELL('',(#448460)); +#448460 = ADVANCED_FACE('',(#448461),#448530,.T.); +#448461 = FACE_BOUND('',#448462,.F.); +#448462 = EDGE_LOOP('',(#448463,#448474,#448482,#448490,#448499,#448507, + #448516,#448524)); +#448463 = ORIENTED_EDGE('',*,*,#448464,.T.); +#448464 = EDGE_CURVE('',#448465,#448467,#448469,.T.); +#448465 = VERTEX_POINT('',#448466); +#448466 = CARTESIAN_POINT('',(148.894567,-62.227039,1.585)); +#448467 = VERTEX_POINT('',#448468); +#448468 = CARTESIAN_POINT('',(149.01,-62.25,1.585)); +#448469 = CIRCLE('',#448470,6.000007318647E-02); +#448470 = AXIS2_PLACEMENT_3D('',#448471,#448472,#448473); +#448471 = CARTESIAN_POINT('',(148.94999992681,-62.24999982331,1.585)); +#448472 = DIRECTION('',(0.,0.,-1.)); +#448473 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#448474 = ORIENTED_EDGE('',*,*,#448475,.T.); +#448475 = EDGE_CURVE('',#448467,#448476,#448478,.T.); +#448476 = VERTEX_POINT('',#448477); +#448477 = CARTESIAN_POINT('',(149.01,-63.19,1.585)); +#448478 = LINE('',#448479,#448480); +#448479 = CARTESIAN_POINT('',(149.01,-62.25,1.585)); +#448480 = VECTOR('',#448481,1.); +#448481 = DIRECTION('',(0.,-1.,0.)); +#448482 = ORIENTED_EDGE('',*,*,#448483,.T.); +#448483 = EDGE_CURVE('',#448476,#448484,#448486,.T.); +#448484 = VERTEX_POINT('',#448485); +#448485 = CARTESIAN_POINT('',(149.55,-63.19,1.585)); +#448486 = LINE('',#448487,#448488); +#448487 = CARTESIAN_POINT('',(149.01,-63.19,1.585)); +#448488 = VECTOR('',#448489,1.); +#448489 = DIRECTION('',(1.,0.,0.)); +#448490 = ORIENTED_EDGE('',*,*,#448491,.T.); +#448491 = EDGE_CURVE('',#448484,#448492,#448494,.T.); +#448492 = VERTEX_POINT('',#448493); +#448493 = CARTESIAN_POINT('',(149.55,-63.31,1.585)); +#448494 = CIRCLE('',#448495,6.000000000043E-02); +#448495 = AXIS2_PLACEMENT_3D('',#448496,#448497,#448498); +#448496 = CARTESIAN_POINT('',(149.55000022558,-63.25,1.585)); +#448497 = DIRECTION('',(0.,0.,-1.)); +#448498 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#448499 = ORIENTED_EDGE('',*,*,#448500,.T.); +#448500 = EDGE_CURVE('',#448492,#448501,#448503,.T.); +#448501 = VERTEX_POINT('',#448502); +#448502 = CARTESIAN_POINT('',(148.95,-63.31,1.585)); +#448503 = LINE('',#448504,#448505); +#448504 = CARTESIAN_POINT('',(149.55,-63.31,1.585)); +#448505 = VECTOR('',#448506,1.); +#448506 = DIRECTION('',(-1.,0.,0.)); +#448507 = ORIENTED_EDGE('',*,*,#448508,.T.); +#448508 = EDGE_CURVE('',#448501,#448509,#448511,.T.); +#448509 = VERTEX_POINT('',#448510); +#448510 = CARTESIAN_POINT('',(148.89,-63.25,1.585)); +#448511 = CIRCLE('',#448512,5.999932016261E-02); +#448512 = AXIS2_PLACEMENT_3D('',#448513,#448514,#448515); +#448513 = CARTESIAN_POINT('',(148.94999932015,-63.25000067984,1.585)); +#448514 = DIRECTION('',(0.,0.,-1.)); +#448515 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#448516 = ORIENTED_EDGE('',*,*,#448517,.T.); +#448517 = EDGE_CURVE('',#448509,#448518,#448520,.T.); +#448518 = VERTEX_POINT('',#448519); +#448519 = CARTESIAN_POINT('',(148.89,-62.25,1.585)); +#448520 = LINE('',#448521,#448522); +#448521 = CARTESIAN_POINT('',(148.89,-63.25,1.585)); +#448522 = VECTOR('',#448523,1.); +#448523 = DIRECTION('',(0.,1.,0.)); +#448524 = ORIENTED_EDGE('',*,*,#448525,.T.); +#448525 = EDGE_CURVE('',#448518,#448465,#448526,.T.); +#448526 = LINE('',#448527,#448528); +#448527 = CARTESIAN_POINT('',(148.89,-62.25,1.585)); +#448528 = VECTOR('',#448529,1.); +#448529 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448530 = PLANE('',#448531); +#448531 = AXIS2_PLACEMENT_3D('',#448532,#448533,#448534); +#448532 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448533 = DIRECTION('',(0.,0.,1.)); +#448534 = DIRECTION('',(1.,0.,-0.)); +#448535 = SHELL_BASED_SURFACE_MODEL('',(#448536)); +#448536 = OPEN_SHELL('',(#448537)); +#448537 = ADVANCED_FACE('',(#448538),#448607,.T.); +#448538 = FACE_BOUND('',#448539,.F.); +#448539 = EDGE_LOOP('',(#448540,#448551,#448559,#448568,#448576,#448585, + #448593,#448601)); +#448540 = ORIENTED_EDGE('',*,*,#448541,.T.); +#448541 = EDGE_CURVE('',#448542,#448544,#448546,.T.); +#448542 = VERTEX_POINT('',#448543); +#448543 = CARTESIAN_POINT('',(153.694567,-62.227039,1.585)); +#448544 = VERTEX_POINT('',#448545); +#448545 = CARTESIAN_POINT('',(153.81,-62.25,1.585)); +#448546 = CIRCLE('',#448547,6.000007318647E-02); +#448547 = AXIS2_PLACEMENT_3D('',#448548,#448549,#448550); +#448548 = CARTESIAN_POINT('',(153.74999992681,-62.24999982331,1.585)); +#448549 = DIRECTION('',(0.,0.,-1.)); +#448550 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#448551 = ORIENTED_EDGE('',*,*,#448552,.T.); +#448552 = EDGE_CURVE('',#448544,#448553,#448555,.T.); +#448553 = VERTEX_POINT('',#448554); +#448554 = CARTESIAN_POINT('',(153.81,-63.25,1.585)); +#448555 = LINE('',#448556,#448557); +#448556 = CARTESIAN_POINT('',(153.81,-62.25,1.585)); +#448557 = VECTOR('',#448558,1.); +#448558 = DIRECTION('',(0.,-1.,0.)); +#448559 = ORIENTED_EDGE('',*,*,#448560,.T.); +#448560 = EDGE_CURVE('',#448553,#448561,#448563,.T.); +#448561 = VERTEX_POINT('',#448562); +#448562 = CARTESIAN_POINT('',(153.75,-63.31,1.585)); +#448563 = CIRCLE('',#448564,5.999932016262E-02); +#448564 = AXIS2_PLACEMENT_3D('',#448565,#448566,#448567); +#448565 = CARTESIAN_POINT('',(153.75000067984,-63.25000067984,1.585)); +#448566 = DIRECTION('',(0.,0.,-1.)); +#448567 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#448568 = ORIENTED_EDGE('',*,*,#448569,.T.); +#448569 = EDGE_CURVE('',#448561,#448570,#448572,.T.); +#448570 = VERTEX_POINT('',#448571); +#448571 = CARTESIAN_POINT('',(153.15,-63.31,1.585)); +#448572 = LINE('',#448573,#448574); +#448573 = CARTESIAN_POINT('',(153.75,-63.31,1.585)); +#448574 = VECTOR('',#448575,1.); +#448575 = DIRECTION('',(-1.,0.,0.)); +#448576 = ORIENTED_EDGE('',*,*,#448577,.T.); +#448577 = EDGE_CURVE('',#448570,#448578,#448580,.T.); +#448578 = VERTEX_POINT('',#448579); +#448579 = CARTESIAN_POINT('',(153.15,-63.19,1.585)); +#448580 = CIRCLE('',#448581,6.000000000043E-02); +#448581 = AXIS2_PLACEMENT_3D('',#448582,#448583,#448584); +#448582 = CARTESIAN_POINT('',(153.14999977441,-63.25,1.585)); +#448583 = DIRECTION('',(0.,0.,-1.)); +#448584 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#448585 = ORIENTED_EDGE('',*,*,#448586,.T.); +#448586 = EDGE_CURVE('',#448578,#448587,#448589,.T.); +#448587 = VERTEX_POINT('',#448588); +#448588 = CARTESIAN_POINT('',(153.69,-63.19,1.585)); +#448589 = LINE('',#448590,#448591); +#448590 = CARTESIAN_POINT('',(153.15,-63.19,1.585)); +#448591 = VECTOR('',#448592,1.); +#448592 = DIRECTION('',(1.,0.,0.)); +#448593 = ORIENTED_EDGE('',*,*,#448594,.T.); +#448594 = EDGE_CURVE('',#448587,#448595,#448597,.T.); +#448595 = VERTEX_POINT('',#448596); +#448596 = CARTESIAN_POINT('',(153.69,-62.25,1.585)); +#448597 = LINE('',#448598,#448599); +#448598 = CARTESIAN_POINT('',(153.69,-63.19,1.585)); +#448599 = VECTOR('',#448600,1.); +#448600 = DIRECTION('',(0.,1.,0.)); +#448601 = ORIENTED_EDGE('',*,*,#448602,.T.); +#448602 = EDGE_CURVE('',#448595,#448542,#448603,.T.); +#448603 = LINE('',#448604,#448605); +#448604 = CARTESIAN_POINT('',(153.69,-62.25,1.585)); +#448605 = VECTOR('',#448606,1.); +#448606 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#448607 = PLANE('',#448608); +#448608 = AXIS2_PLACEMENT_3D('',#448609,#448610,#448611); +#448609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448610 = DIRECTION('',(0.,0.,1.)); +#448611 = DIRECTION('',(1.,0.,-0.)); +#448612 = SHELL_BASED_SURFACE_MODEL('',(#448613)); +#448613 = OPEN_SHELL('',(#448614)); +#448614 = ADVANCED_FACE('',(#448615),#448789,.T.); +#448615 = FACE_BOUND('',#448616,.F.); +#448616 = EDGE_LOOP('',(#448617,#448628,#448636,#448644,#448653,#448661, + #448669,#448677,#448685,#448693,#448702,#448710,#448718,#448726, + #448734,#448742,#448750,#448759,#448767,#448775,#448783)); +#448617 = ORIENTED_EDGE('',*,*,#448618,.T.); +#448618 = EDGE_CURVE('',#448619,#448621,#448623,.T.); +#448619 = VERTEX_POINT('',#448620); +#448620 = CARTESIAN_POINT('',(135.00595,-60.842459,1.585)); +#448621 = VERTEX_POINT('',#448622); +#448622 = CARTESIAN_POINT('',(135.122618,-60.904819,1.585)); +#448623 = CIRCLE('',#448624,7.500000000002E-02); +#448624 = AXIS2_PLACEMENT_3D('',#448625,#448626,#448627); +#448625 = CARTESIAN_POINT('',(135.047618,-60.90481906555,1.585)); +#448626 = DIRECTION('',(0.,0.,-1.)); +#448627 = DIRECTION('',(-0.555573333333,0.831467540731,0.)); +#448628 = ORIENTED_EDGE('',*,*,#448629,.T.); +#448629 = EDGE_CURVE('',#448621,#448630,#448632,.T.); +#448630 = VERTEX_POINT('',#448631); +#448631 = CARTESIAN_POINT('',(135.122618,-61.163152,1.585)); +#448632 = LINE('',#448633,#448634); +#448633 = CARTESIAN_POINT('',(135.122618,-60.904819,1.585)); +#448634 = VECTOR('',#448635,1.); +#448635 = DIRECTION('',(0.,-1.,0.)); +#448636 = ORIENTED_EDGE('',*,*,#448637,.T.); +#448637 = EDGE_CURVE('',#448630,#448638,#448640,.T.); +#448638 = VERTEX_POINT('',#448639); +#448639 = CARTESIAN_POINT('',(135.300345,-61.164593,1.585)); +#448640 = LINE('',#448641,#448642); +#448641 = CARTESIAN_POINT('',(135.122618,-61.163152,1.585)); +#448642 = VECTOR('',#448643,1.); +#448643 = DIRECTION('',(0.999967132268,-8.107674341014E-03,0.)); +#448644 = ORIENTED_EDGE('',*,*,#448645,.T.); +#448645 = EDGE_CURVE('',#448638,#448646,#448648,.T.); +#448646 = VERTEX_POINT('',#448647); +#448647 = CARTESIAN_POINT('',(135.285713,-61.313152,1.585)); +#448648 = CIRCLE('',#448649,7.500006711464E-02); +#448649 = AXIS2_PLACEMENT_3D('',#448650,#448651,#448652); +#448650 = CARTESIAN_POINT('',(135.28571306711,-61.23815193288,1.585)); +#448651 = DIRECTION('',(0.,0.,-1.)); +#448652 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#448653 = ORIENTED_EDGE('',*,*,#448654,.T.); +#448654 = EDGE_CURVE('',#448646,#448655,#448657,.T.); +#448655 = VERTEX_POINT('',#448656); +#448656 = CARTESIAN_POINT('',(135.122618,-61.313152,1.585)); +#448657 = LINE('',#448658,#448659); +#448658 = CARTESIAN_POINT('',(135.285713,-61.313152,1.585)); +#448659 = VECTOR('',#448660,1.); +#448660 = DIRECTION('',(-1.,0.,0.)); +#448661 = ORIENTED_EDGE('',*,*,#448662,.T.); +#448662 = EDGE_CURVE('',#448655,#448663,#448665,.T.); +#448663 = VERTEX_POINT('',#448664); +#448664 = CARTESIAN_POINT('',(135.122618,-61.744256,1.585)); +#448665 = LINE('',#448666,#448667); +#448666 = CARTESIAN_POINT('',(135.122618,-61.313152,1.585)); +#448667 = VECTOR('',#448668,1.); +#448668 = DIRECTION('',(0.,-1.,0.)); +#448669 = ORIENTED_EDGE('',*,*,#448670,.T.); +#448670 = EDGE_CURVE('',#448663,#448671,#448673,.T.); +#448671 = VERTEX_POINT('',#448672); +#448672 = CARTESIAN_POINT('',(135.151138,-61.801298,1.585)); +#448673 = LINE('',#448674,#448675); +#448674 = CARTESIAN_POINT('',(135.122618,-61.744256,1.585)); +#448675 = VECTOR('',#448676,1.); +#448676 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#448677 = ORIENTED_EDGE('',*,*,#448678,.T.); +#448678 = EDGE_CURVE('',#448671,#448679,#448681,.T.); +#448679 = VERTEX_POINT('',#448680); +#448680 = CARTESIAN_POINT('',(135.20818,-61.829819,1.585)); +#448681 = LINE('',#448682,#448683); +#448682 = CARTESIAN_POINT('',(135.151138,-61.801298,1.585)); +#448683 = VECTOR('',#448684,1.); +#448684 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#448685 = ORIENTED_EDGE('',*,*,#448686,.T.); +#448686 = EDGE_CURVE('',#448679,#448687,#448689,.T.); +#448687 = VERTEX_POINT('',#448688); +#448688 = CARTESIAN_POINT('',(135.300345,-61.83126,1.585)); +#448689 = LINE('',#448690,#448691); +#448690 = CARTESIAN_POINT('',(135.20818,-61.829819,1.585)); +#448691 = VECTOR('',#448692,1.); +#448692 = DIRECTION('',(0.999877795754,-1.563309177758E-02,0.)); +#448693 = ORIENTED_EDGE('',*,*,#448694,.T.); +#448694 = EDGE_CURVE('',#448687,#448695,#448697,.T.); +#448695 = VERTEX_POINT('',#448696); +#448696 = CARTESIAN_POINT('',(135.285713,-61.979819,1.585)); +#448697 = CIRCLE('',#448698,7.500006711463E-02); +#448698 = AXIS2_PLACEMENT_3D('',#448699,#448700,#448701); +#448699 = CARTESIAN_POINT('',(135.28571306711,-61.90481893288,1.585)); +#448700 = DIRECTION('',(0.,0.,-1.)); +#448701 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#448702 = ORIENTED_EDGE('',*,*,#448703,.T.); +#448703 = EDGE_CURVE('',#448695,#448704,#448706,.T.); +#448704 = VERTEX_POINT('',#448705); +#448705 = CARTESIAN_POINT('',(135.170665,-61.977156,1.585)); +#448706 = LINE('',#448707,#448708); +#448707 = CARTESIAN_POINT('',(135.285713,-61.979819,1.585)); +#448708 = VECTOR('',#448709,1.); +#448709 = DIRECTION('',(-0.999732219024,2.314066215198E-02,0.)); +#448710 = ORIENTED_EDGE('',*,*,#448711,.T.); +#448711 = EDGE_CURVE('',#448704,#448712,#448714,.T.); +#448712 = VERTEX_POINT('',#448713); +#448713 = CARTESIAN_POINT('',(135.049253,-61.91645,1.585)); +#448714 = LINE('',#448715,#448716); +#448715 = CARTESIAN_POINT('',(135.170665,-61.977156,1.585)); +#448716 = VECTOR('',#448717,1.); +#448717 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#448718 = ORIENTED_EDGE('',*,*,#448719,.T.); +#448719 = EDGE_CURVE('',#448712,#448720,#448722,.T.); +#448720 = VERTEX_POINT('',#448721); +#448721 = CARTESIAN_POINT('',(135.028155,-61.890741,1.585)); +#448722 = LINE('',#448723,#448724); +#448723 = CARTESIAN_POINT('',(135.049253,-61.91645,1.585)); +#448724 = VECTOR('',#448725,1.); +#448725 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#448726 = ORIENTED_EDGE('',*,*,#448727,.T.); +#448727 = EDGE_CURVE('',#448720,#448728,#448730,.T.); +#448728 = VERTEX_POINT('',#448729); +#448729 = CARTESIAN_POINT('',(134.974059,-61.776593,1.585)); +#448730 = LINE('',#448731,#448732); +#448731 = CARTESIAN_POINT('',(135.028155,-61.890741,1.585)); +#448732 = VECTOR('',#448733,1.); +#448733 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#448734 = ORIENTED_EDGE('',*,*,#448735,.T.); +#448735 = EDGE_CURVE('',#448728,#448736,#448738,.T.); +#448736 = VERTEX_POINT('',#448737); +#448737 = CARTESIAN_POINT('',(134.972618,-61.313152,1.585)); +#448738 = LINE('',#448739,#448740); +#448739 = CARTESIAN_POINT('',(134.974059,-61.776593,1.585)); +#448740 = VECTOR('',#448741,1.); +#448741 = DIRECTION('',(-3.109334379603E-03,0.999995166008,0.)); +#448742 = ORIENTED_EDGE('',*,*,#448743,.T.); +#448743 = EDGE_CURVE('',#448736,#448744,#448746,.T.); +#448744 = VERTEX_POINT('',#448745); +#448745 = CARTESIAN_POINT('',(134.890129,-61.311711,1.585)); +#448746 = LINE('',#448747,#448748); +#448747 = CARTESIAN_POINT('',(134.972618,-61.313152,1.585)); +#448748 = VECTOR('',#448749,1.); +#448749 = DIRECTION('',(-0.999847452005,1.746633100582E-02,0.)); +#448750 = ORIENTED_EDGE('',*,*,#448751,.T.); +#448751 = EDGE_CURVE('',#448744,#448752,#448754,.T.); +#448752 = VERTEX_POINT('',#448753); +#448753 = CARTESIAN_POINT('',(134.904761,-61.163152,1.585)); +#448754 = CIRCLE('',#448755,7.500006711464E-02); +#448755 = AXIS2_PLACEMENT_3D('',#448756,#448757,#448758); +#448756 = CARTESIAN_POINT('',(134.90476093288,-61.23815206711,1.585)); +#448757 = DIRECTION('',(0.,0.,-1.)); +#448758 = DIRECTION('',(-0.195092263891,-0.980784894138,-0.)); +#448759 = ORIENTED_EDGE('',*,*,#448760,.T.); +#448760 = EDGE_CURVE('',#448752,#448761,#448763,.T.); +#448761 = VERTEX_POINT('',#448762); +#448762 = CARTESIAN_POINT('',(134.972618,-61.163152,1.585)); +#448763 = LINE('',#448764,#448765); +#448764 = CARTESIAN_POINT('',(134.904761,-61.163152,1.585)); +#448765 = VECTOR('',#448766,1.); +#448766 = DIRECTION('',(1.,0.,0.)); +#448767 = ORIENTED_EDGE('',*,*,#448768,.T.); +#448768 = EDGE_CURVE('',#448761,#448769,#448771,.T.); +#448769 = VERTEX_POINT('',#448770); +#448770 = CARTESIAN_POINT('',(134.974059,-60.890187,1.585)); +#448771 = LINE('',#448772,#448773); +#448772 = CARTESIAN_POINT('',(134.972618,-61.163152,1.585)); +#448773 = VECTOR('',#448774,1.); +#448774 = DIRECTION('',(5.278991523254E-03,0.999986066027,0.)); +#448775 = ORIENTED_EDGE('',*,*,#448776,.T.); +#448776 = EDGE_CURVE('',#448769,#448777,#448779,.T.); +#448777 = VERTEX_POINT('',#448778); +#448778 = CARTESIAN_POINT('',(134.985258,-60.863151,1.585)); +#448779 = LINE('',#448780,#448781); +#448780 = CARTESIAN_POINT('',(134.974059,-60.890187,1.585)); +#448781 = VECTOR('',#448782,1.); +#448782 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#448783 = ORIENTED_EDGE('',*,*,#448784,.T.); +#448784 = EDGE_CURVE('',#448777,#448619,#448785,.T.); +#448785 = LINE('',#448786,#448787); +#448786 = CARTESIAN_POINT('',(134.985258,-60.863151,1.585)); +#448787 = VECTOR('',#448788,1.); +#448788 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#448789 = PLANE('',#448790); +#448790 = AXIS2_PLACEMENT_3D('',#448791,#448792,#448793); +#448791 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448792 = DIRECTION('',(0.,0.,1.)); +#448793 = DIRECTION('',(1.,0.,-0.)); +#448794 = SHELL_BASED_SURFACE_MODEL('',(#448795)); +#448795 = OPEN_SHELL('',(#448796)); +#448796 = ADVANCED_FACE('',(#448797,#448866),#448892,.T.); +#448797 = FACE_BOUND('',#448798,.F.); +#448798 = EDGE_LOOP('',(#448799,#448810,#448818,#448827,#448835,#448843, + #448851,#448860)); +#448799 = ORIENTED_EDGE('',*,*,#448800,.T.); +#448800 = EDGE_CURVE('',#448801,#448803,#448805,.T.); +#448801 = VERTEX_POINT('',#448802); +#448802 = CARTESIAN_POINT('',(133.411032,-60.867677,1.585)); +#448803 = VERTEX_POINT('',#448804); +#448804 = CARTESIAN_POINT('',(133.541346,-60.867676,1.585)); +#448805 = CIRCLE('',#448806,7.590818603349E-02); +#448806 = AXIS2_PLACEMENT_3D('',#448807,#448808,#448809); +#448807 = CARTESIAN_POINT('',(133.47618929884,-60.90662028073,1.585)); +#448808 = DIRECTION('',(0.,0.,-1.)); +#448809 = DIRECTION('',(-0.858369857725,0.513031370726,0.)); +#448810 = ORIENTED_EDGE('',*,*,#448811,.T.); +#448811 = EDGE_CURVE('',#448803,#448812,#448814,.T.); +#448812 = VERTEX_POINT('',#448813); +#448813 = CARTESIAN_POINT('',(133.883933,-61.895438,1.585)); +#448814 = LINE('',#448815,#448816); +#448815 = CARTESIAN_POINT('',(133.541346,-60.867676,1.585)); +#448816 = VECTOR('',#448817,1.); +#448817 = DIRECTION('',(0.3162274891,-0.948683390356,0.)); +#448818 = ORIENTED_EDGE('',*,*,#448819,.T.); +#448819 = EDGE_CURVE('',#448812,#448820,#448822,.T.); +#448820 = VERTEX_POINT('',#448821); +#448821 = CARTESIAN_POINT('',(133.738371,-61.928536,1.585)); +#448822 = CIRCLE('',#448823,7.499988769955E-02); +#448823 = AXIS2_PLACEMENT_3D('',#448824,#448825,#448826); +#448824 = CARTESIAN_POINT('',(133.80952208775,-61.90481879387,1.585)); +#448825 = DIRECTION('',(0.,0.,-1.)); +#448826 = DIRECTION('',(0.992146982185,0.125077438982,0.)); +#448827 = ORIENTED_EDGE('',*,*,#448828,.T.); +#448828 = EDGE_CURVE('',#448820,#448829,#448831,.T.); +#448829 = VERTEX_POINT('',#448830); +#448830 = CARTESIAN_POINT('',(133.660227,-61.694104,1.585)); +#448831 = LINE('',#448832,#448833); +#448832 = CARTESIAN_POINT('',(133.738371,-61.928536,1.585)); +#448833 = VECTOR('',#448834,1.); +#448834 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#448835 = ORIENTED_EDGE('',*,*,#448836,.T.); +#448836 = EDGE_CURVE('',#448829,#448837,#448839,.T.); +#448837 = VERTEX_POINT('',#448838); +#448838 = CARTESIAN_POINT('',(133.292151,-61.694104,1.585)); +#448839 = LINE('',#448840,#448841); +#448840 = CARTESIAN_POINT('',(133.660227,-61.694104,1.585)); +#448841 = VECTOR('',#448842,1.); +#448842 = DIRECTION('',(-1.,0.,0.)); +#448843 = ORIENTED_EDGE('',*,*,#448844,.T.); +#448844 = EDGE_CURVE('',#448837,#448845,#448847,.T.); +#448845 = VERTEX_POINT('',#448846); +#448846 = CARTESIAN_POINT('',(133.208013,-61.941962,1.585)); +#448847 = LINE('',#448848,#448849); +#448848 = CARTESIAN_POINT('',(133.292151,-61.694104,1.585)); +#448849 = VECTOR('',#448850,1.); +#448850 = DIRECTION('',(-0.321444762489,-0.946928331326,0.)); +#448851 = ORIENTED_EDGE('',*,*,#448852,.T.); +#448852 = EDGE_CURVE('',#448845,#448853,#448855,.T.); +#448853 = VERTEX_POINT('',#448854); +#448854 = CARTESIAN_POINT('',(133.071705,-61.881102,1.585)); +#448855 = CIRCLE('',#448856,7.50000151955E-02); +#448856 = AXIS2_PLACEMENT_3D('',#448857,#448858,#448859); +#448857 = CARTESIAN_POINT('',(133.14285632417,-61.90481890003,1.585)); +#448858 = DIRECTION('',(-0.,0.,-1.)); +#448859 = DIRECTION('',(0.868755501642,-0.495241232499,-0.)); +#448860 = ORIENTED_EDGE('',*,*,#448861,.T.); +#448861 = EDGE_CURVE('',#448853,#448801,#448862,.T.); +#448862 = LINE('',#448863,#448864); +#448863 = CARTESIAN_POINT('',(133.071705,-61.881102,1.585)); +#448864 = VECTOR('',#448865,1.); +#448865 = DIRECTION('',(0.317506385825,0.948256133626,0.)); +#448866 = FACE_BOUND('',#448867,.F.); +#448867 = EDGE_LOOP('',(#448868,#448878,#448886)); +#448868 = ORIENTED_EDGE('',*,*,#448869,.T.); +#448869 = EDGE_CURVE('',#448870,#448872,#448874,.T.); +#448870 = VERTEX_POINT('',#448871); +#448871 = CARTESIAN_POINT('',(133.342151,-61.544104,1.585)); +#448872 = VERTEX_POINT('',#448873); +#448873 = CARTESIAN_POINT('',(133.610227,-61.544104,1.585)); +#448874 = LINE('',#448875,#448876); +#448875 = CARTESIAN_POINT('',(133.342151,-61.544104,1.585)); +#448876 = VECTOR('',#448877,1.); +#448877 = DIRECTION('',(1.,0.,0.)); +#448878 = ORIENTED_EDGE('',*,*,#448879,.T.); +#448879 = EDGE_CURVE('',#448872,#448880,#448882,.T.); +#448880 = VERTEX_POINT('',#448881); +#448881 = CARTESIAN_POINT('',(133.476189,-61.141989,1.585)); +#448882 = LINE('',#448883,#448884); +#448883 = CARTESIAN_POINT('',(133.610227,-61.544104,1.585)); +#448884 = VECTOR('',#448885,1.); +#448885 = DIRECTION('',(-0.316227058246,0.948683533974,0.)); +#448886 = ORIENTED_EDGE('',*,*,#448887,.T.); +#448887 = EDGE_CURVE('',#448880,#448870,#448888,.T.); +#448888 = LINE('',#448889,#448890); +#448889 = CARTESIAN_POINT('',(133.476189,-61.141989,1.585)); +#448890 = VECTOR('',#448891,1.); +#448891 = DIRECTION('',(-0.316227058246,-0.948683533974,0.)); +#448892 = PLANE('',#448893); +#448893 = AXIS2_PLACEMENT_3D('',#448894,#448895,#448896); +#448894 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448895 = DIRECTION('',(0.,0.,1.)); +#448896 = DIRECTION('',(1.,0.,-0.)); +#448897 = SHELL_BASED_SURFACE_MODEL('',(#448898)); +#448898 = OPEN_SHELL('',(#448899)); +#448899 = ADVANCED_FACE('',(#448900,#448969),#448995,.T.); +#448900 = FACE_BOUND('',#448901,.F.); +#448901 = EDGE_LOOP('',(#448902,#448913,#448921,#448930,#448938,#448946, + #448954,#448963)); +#448902 = ORIENTED_EDGE('',*,*,#448903,.T.); +#448903 = EDGE_CURVE('',#448904,#448906,#448908,.T.); +#448904 = VERTEX_POINT('',#448905); +#448905 = CARTESIAN_POINT('',(140.0777,-60.867677,1.585)); +#448906 = VERTEX_POINT('',#448907); +#448907 = CARTESIAN_POINT('',(140.208014,-60.867676,1.585)); +#448908 = CIRCLE('',#448909,7.590818603349E-02); +#448909 = AXIS2_PLACEMENT_3D('',#448910,#448911,#448912); +#448910 = CARTESIAN_POINT('',(140.14285729884,-60.90662028073,1.585)); +#448911 = DIRECTION('',(0.,0.,-1.)); +#448912 = DIRECTION('',(-0.858369857725,0.513031370727,0.)); +#448913 = ORIENTED_EDGE('',*,*,#448914,.T.); +#448914 = EDGE_CURVE('',#448906,#448915,#448917,.T.); +#448915 = VERTEX_POINT('',#448916); +#448916 = CARTESIAN_POINT('',(140.550601,-61.895438,1.585)); +#448917 = LINE('',#448918,#448919); +#448918 = CARTESIAN_POINT('',(140.208014,-60.867676,1.585)); +#448919 = VECTOR('',#448920,1.); +#448920 = DIRECTION('',(0.3162274891,-0.948683390356,0.)); +#448921 = ORIENTED_EDGE('',*,*,#448922,.T.); +#448922 = EDGE_CURVE('',#448915,#448923,#448925,.T.); +#448923 = VERTEX_POINT('',#448924); +#448924 = CARTESIAN_POINT('',(140.405039,-61.928536,1.585)); +#448925 = CIRCLE('',#448926,7.499988769955E-02); +#448926 = AXIS2_PLACEMENT_3D('',#448927,#448928,#448929); +#448927 = CARTESIAN_POINT('',(140.47619008775,-61.90481879387,1.585)); +#448928 = DIRECTION('',(0.,0.,-1.)); +#448929 = DIRECTION('',(0.992146982185,0.125077438981,0.)); +#448930 = ORIENTED_EDGE('',*,*,#448931,.T.); +#448931 = EDGE_CURVE('',#448923,#448932,#448934,.T.); +#448932 = VERTEX_POINT('',#448933); +#448933 = CARTESIAN_POINT('',(140.326895,-61.694104,1.585)); +#448934 = LINE('',#448935,#448936); +#448935 = CARTESIAN_POINT('',(140.405039,-61.928536,1.585)); +#448936 = VECTOR('',#448937,1.); +#448937 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#448938 = ORIENTED_EDGE('',*,*,#448939,.T.); +#448939 = EDGE_CURVE('',#448932,#448940,#448942,.T.); +#448940 = VERTEX_POINT('',#448941); +#448941 = CARTESIAN_POINT('',(139.958819,-61.694104,1.585)); +#448942 = LINE('',#448943,#448944); +#448943 = CARTESIAN_POINT('',(140.326895,-61.694104,1.585)); +#448944 = VECTOR('',#448945,1.); +#448945 = DIRECTION('',(-1.,0.,0.)); +#448946 = ORIENTED_EDGE('',*,*,#448947,.T.); +#448947 = EDGE_CURVE('',#448940,#448948,#448950,.T.); +#448948 = VERTEX_POINT('',#448949); +#448949 = CARTESIAN_POINT('',(139.874681,-61.941962,1.585)); +#448950 = LINE('',#448951,#448952); +#448951 = CARTESIAN_POINT('',(139.958819,-61.694104,1.585)); +#448952 = VECTOR('',#448953,1.); +#448953 = DIRECTION('',(-0.321444762489,-0.946928331326,0.)); +#448954 = ORIENTED_EDGE('',*,*,#448955,.T.); +#448955 = EDGE_CURVE('',#448948,#448956,#448958,.T.); +#448956 = VERTEX_POINT('',#448957); +#448957 = CARTESIAN_POINT('',(139.738373,-61.881102,1.585)); +#448958 = CIRCLE('',#448959,7.500001519551E-02); +#448959 = AXIS2_PLACEMENT_3D('',#448960,#448961,#448962); +#448960 = CARTESIAN_POINT('',(139.80952432417,-61.90481890003,1.585)); +#448961 = DIRECTION('',(-0.,0.,-1.)); +#448962 = DIRECTION('',(0.868755501642,-0.495241232499,-0.)); +#448963 = ORIENTED_EDGE('',*,*,#448964,.T.); +#448964 = EDGE_CURVE('',#448956,#448904,#448965,.T.); +#448965 = LINE('',#448966,#448967); +#448966 = CARTESIAN_POINT('',(139.738373,-61.881102,1.585)); +#448967 = VECTOR('',#448968,1.); +#448968 = DIRECTION('',(0.317506385825,0.948256133626,0.)); +#448969 = FACE_BOUND('',#448970,.F.); +#448970 = EDGE_LOOP('',(#448971,#448981,#448989)); +#448971 = ORIENTED_EDGE('',*,*,#448972,.T.); +#448972 = EDGE_CURVE('',#448973,#448975,#448977,.T.); +#448973 = VERTEX_POINT('',#448974); +#448974 = CARTESIAN_POINT('',(140.008819,-61.544104,1.585)); +#448975 = VERTEX_POINT('',#448976); +#448976 = CARTESIAN_POINT('',(140.276895,-61.544104,1.585)); +#448977 = LINE('',#448978,#448979); +#448978 = CARTESIAN_POINT('',(140.008819,-61.544104,1.585)); +#448979 = VECTOR('',#448980,1.); +#448980 = DIRECTION('',(1.,0.,0.)); +#448981 = ORIENTED_EDGE('',*,*,#448982,.T.); +#448982 = EDGE_CURVE('',#448975,#448983,#448985,.T.); +#448983 = VERTEX_POINT('',#448984); +#448984 = CARTESIAN_POINT('',(140.142857,-61.141989,1.585)); +#448985 = LINE('',#448986,#448987); +#448986 = CARTESIAN_POINT('',(140.276895,-61.544104,1.585)); +#448987 = VECTOR('',#448988,1.); +#448988 = DIRECTION('',(-0.316227058246,0.948683533974,0.)); +#448989 = ORIENTED_EDGE('',*,*,#448990,.T.); +#448990 = EDGE_CURVE('',#448983,#448973,#448991,.T.); +#448991 = LINE('',#448992,#448993); +#448992 = CARTESIAN_POINT('',(140.142857,-61.141989,1.585)); +#448993 = VECTOR('',#448994,1.); +#448994 = DIRECTION('',(-0.316227058246,-0.948683533974,0.)); +#448995 = PLANE('',#448996); +#448996 = AXIS2_PLACEMENT_3D('',#448997,#448998,#448999); +#448997 = CARTESIAN_POINT('',(0.,0.,1.585)); +#448998 = DIRECTION('',(0.,0.,1.)); +#448999 = DIRECTION('',(1.,0.,-0.)); +#449000 = SHELL_BASED_SURFACE_MODEL('',(#449001)); +#449001 = OPEN_SHELL('',(#449002)); +#449002 = ADVANCED_FACE('',(#449003),#449161,.T.); +#449003 = FACE_BOUND('',#449004,.F.); +#449004 = EDGE_LOOP('',(#449005,#449016,#449024,#449032,#449040,#449048, + #449057,#449065,#449074,#449082,#449090,#449098,#449106,#449114, + #449122,#449130,#449139,#449147,#449155)); +#449005 = ORIENTED_EDGE('',*,*,#449006,.T.); +#449006 = EDGE_CURVE('',#449007,#449009,#449011,.T.); +#449007 = VERTEX_POINT('',#449008); +#449008 = CARTESIAN_POINT('',(134.101188,-61.175792,1.585)); +#449009 = VERTEX_POINT('',#449010); +#449010 = CARTESIAN_POINT('',(134.203925,-61.195193,1.585)); +#449011 = CIRCLE('',#449012,7.440760172326E-02); +#449012 = AXIS2_PLACEMENT_3D('',#449013,#449014,#449015); +#449013 = CARTESIAN_POINT('',(134.14273106572,-61.23752258305,1.585)); +#449014 = DIRECTION('',(0.,0.,-1.)); +#449015 = DIRECTION('',(-0.558317493913,0.82962737177,0.)); +#449016 = ORIENTED_EDGE('',*,*,#449017,.T.); +#449017 = EDGE_CURVE('',#449009,#449018,#449020,.T.); +#449018 = VERTEX_POINT('',#449019); +#449019 = CARTESIAN_POINT('',(134.271081,-61.164593,1.585)); +#449020 = LINE('',#449021,#449022); +#449021 = CARTESIAN_POINT('',(134.203925,-61.195193,1.585)); +#449022 = VECTOR('',#449023,1.); +#449023 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#449024 = ORIENTED_EDGE('',*,*,#449025,.T.); +#449025 = EDGE_CURVE('',#449018,#449026,#449028,.T.); +#449026 = VERTEX_POINT('',#449027); +#449027 = CARTESIAN_POINT('',(134.443202,-61.164593,1.585)); +#449028 = LINE('',#449029,#449030); +#449029 = CARTESIAN_POINT('',(134.271081,-61.164593,1.585)); +#449030 = VECTOR('',#449031,1.); +#449031 = DIRECTION('',(1.,0.,0.)); +#449032 = ORIENTED_EDGE('',*,*,#449033,.T.); +#449033 = EDGE_CURVE('',#449026,#449034,#449036,.T.); +#449034 = VERTEX_POINT('',#449035); +#449035 = CARTESIAN_POINT('',(134.569792,-61.226521,1.585)); +#449036 = LINE('',#449037,#449038); +#449037 = CARTESIAN_POINT('',(134.443202,-61.164593,1.585)); +#449038 = VECTOR('',#449039,1.); +#449039 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#449040 = ORIENTED_EDGE('',*,*,#449041,.T.); +#449041 = EDGE_CURVE('',#449034,#449042,#449044,.T.); +#449042 = VERTEX_POINT('',#449043); +#449043 = CARTESIAN_POINT('',(134.59089,-61.25223,1.585)); +#449044 = LINE('',#449045,#449046); +#449045 = CARTESIAN_POINT('',(134.569792,-61.226521,1.585)); +#449046 = VECTOR('',#449047,1.); +#449047 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#449048 = ORIENTED_EDGE('',*,*,#449049,.T.); +#449049 = EDGE_CURVE('',#449042,#449050,#449052,.T.); +#449050 = VERTEX_POINT('',#449051); +#449051 = CARTESIAN_POINT('',(134.633787,-61.946487,1.585)); +#449052 = CIRCLE('',#449053,0.780466291445); +#449053 = AXIS2_PLACEMENT_3D('',#449054,#449055,#449056); +#449054 = CARTESIAN_POINT('',(133.9149772213,-61.64244730828,1.585)); +#449055 = DIRECTION('',(0.,0.,-1.)); +#449056 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#449057 = ORIENTED_EDGE('',*,*,#449058,.T.); +#449058 = EDGE_CURVE('',#449050,#449059,#449061,.T.); +#449059 = VERTEX_POINT('',#449060); +#449060 = CARTESIAN_POINT('',(134.613095,-61.967179,1.585)); +#449061 = LINE('',#449062,#449063); +#449062 = CARTESIAN_POINT('',(134.633787,-61.946487,1.585)); +#449063 = VECTOR('',#449064,1.); +#449064 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#449065 = ORIENTED_EDGE('',*,*,#449066,.T.); +#449066 = EDGE_CURVE('',#449059,#449067,#449069,.T.); +#449067 = VERTEX_POINT('',#449068); +#449068 = CARTESIAN_POINT('',(134.496427,-61.904819,1.585)); +#449069 = CIRCLE('',#449070,7.49997958033E-02); +#449070 = AXIS2_PLACEMENT_3D('',#449071,#449072,#449073); +#449071 = CARTESIAN_POINT('',(134.5714267958,-61.90481931647,1.585)); +#449072 = DIRECTION('',(-0.,0.,-1.)); +#449073 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#449074 = ORIENTED_EDGE('',*,*,#449075,.T.); +#449075 = EDGE_CURVE('',#449067,#449076,#449078,.T.); +#449076 = VERTEX_POINT('',#449077); +#449077 = CARTESIAN_POINT('',(134.496427,-61.398714,1.585)); +#449078 = LINE('',#449079,#449080); +#449079 = CARTESIAN_POINT('',(134.496427,-61.904819,1.585)); +#449080 = VECTOR('',#449081,1.); +#449081 = DIRECTION('',(0.,1.,0.)); +#449082 = ORIENTED_EDGE('',*,*,#449083,.T.); +#449083 = EDGE_CURVE('',#449076,#449084,#449086,.T.); +#449084 = VERTEX_POINT('',#449085); +#449085 = CARTESIAN_POINT('',(134.467906,-61.341672,1.585)); +#449086 = LINE('',#449087,#449088); +#449087 = CARTESIAN_POINT('',(134.496427,-61.398714,1.585)); +#449088 = VECTOR('',#449089,1.); +#449089 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#449090 = ORIENTED_EDGE('',*,*,#449091,.T.); +#449091 = EDGE_CURVE('',#449084,#449092,#449094,.T.); +#449092 = VERTEX_POINT('',#449093); +#449093 = CARTESIAN_POINT('',(134.410865,-61.313152,1.585)); +#449094 = LINE('',#449095,#449096); +#449095 = CARTESIAN_POINT('',(134.467906,-61.341672,1.585)); +#449096 = VECTOR('',#449097,1.); +#449097 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#449098 = ORIENTED_EDGE('',*,*,#449099,.T.); +#449099 = EDGE_CURVE('',#449092,#449100,#449102,.T.); +#449100 = VERTEX_POINT('',#449101); +#449101 = CARTESIAN_POINT('',(134.303418,-61.313152,1.585)); +#449102 = LINE('',#449103,#449104); +#449103 = CARTESIAN_POINT('',(134.410865,-61.313152,1.585)); +#449104 = VECTOR('',#449105,1.); +#449105 = DIRECTION('',(-1.,0.,0.)); +#449106 = ORIENTED_EDGE('',*,*,#449107,.T.); +#449107 = EDGE_CURVE('',#449100,#449108,#449110,.T.); +#449108 = VERTEX_POINT('',#449109); +#449109 = CARTESIAN_POINT('',(134.234902,-61.34741,1.585)); +#449110 = LINE('',#449111,#449112); +#449111 = CARTESIAN_POINT('',(134.303418,-61.313152,1.585)); +#449112 = VECTOR('',#449113,1.); +#449113 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#449114 = ORIENTED_EDGE('',*,*,#449115,.T.); +#449115 = EDGE_CURVE('',#449108,#449116,#449118,.T.); +#449116 = VERTEX_POINT('',#449117); +#449117 = CARTESIAN_POINT('',(134.217856,-61.364456,1.585)); +#449118 = LINE('',#449119,#449120); +#449119 = CARTESIAN_POINT('',(134.234902,-61.34741,1.585)); +#449120 = VECTOR('',#449121,1.); +#449121 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#449122 = ORIENTED_EDGE('',*,*,#449123,.T.); +#449123 = EDGE_CURVE('',#449116,#449124,#449126,.T.); +#449124 = VERTEX_POINT('',#449125); +#449125 = CARTESIAN_POINT('',(134.216415,-61.919451,1.585)); +#449126 = LINE('',#449127,#449128); +#449127 = CARTESIAN_POINT('',(134.217856,-61.364456,1.585)); +#449128 = VECTOR('',#449129,1.); +#449129 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#449130 = ORIENTED_EDGE('',*,*,#449131,.T.); +#449131 = EDGE_CURVE('',#449124,#449132,#449134,.T.); +#449132 = VERTEX_POINT('',#449133); +#449133 = CARTESIAN_POINT('',(134.067856,-61.904819,1.585)); +#449134 = CIRCLE('',#449135,7.500006711464E-02); +#449135 = AXIS2_PLACEMENT_3D('',#449136,#449137,#449138); +#449136 = CARTESIAN_POINT('',(134.14285606711,-61.90481906711,1.585)); +#449137 = DIRECTION('',(-0.,0.,-1.)); +#449138 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#449139 = ORIENTED_EDGE('',*,*,#449140,.T.); +#449140 = EDGE_CURVE('',#449132,#449141,#449143,.T.); +#449141 = VERTEX_POINT('',#449142); +#449142 = CARTESIAN_POINT('',(134.069297,-61.22352,1.585)); +#449143 = LINE('',#449144,#449145); +#449144 = CARTESIAN_POINT('',(134.067856,-61.904819,1.585)); +#449145 = VECTOR('',#449146,1.); +#449146 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#449147 = ORIENTED_EDGE('',*,*,#449148,.T.); +#449148 = EDGE_CURVE('',#449141,#449149,#449151,.T.); +#449149 = VERTEX_POINT('',#449150); +#449150 = CARTESIAN_POINT('',(134.080496,-61.196484,1.585)); +#449151 = LINE('',#449152,#449153); +#449152 = CARTESIAN_POINT('',(134.069297,-61.22352,1.585)); +#449153 = VECTOR('',#449154,1.); +#449154 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#449155 = ORIENTED_EDGE('',*,*,#449156,.T.); +#449156 = EDGE_CURVE('',#449149,#449007,#449157,.T.); +#449157 = LINE('',#449158,#449159); +#449158 = CARTESIAN_POINT('',(134.080496,-61.196484,1.585)); +#449159 = VECTOR('',#449160,1.); +#449160 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#449161 = PLANE('',#449162); +#449162 = AXIS2_PLACEMENT_3D('',#449163,#449164,#449165); +#449163 = CARTESIAN_POINT('',(0.,0.,1.585)); +#449164 = DIRECTION('',(0.,0.,1.)); +#449165 = DIRECTION('',(1.,0.,-0.)); +#449166 = SHELL_BASED_SURFACE_MODEL('',(#449167)); +#449167 = OPEN_SHELL('',(#449168)); +#449168 = ADVANCED_FACE('',(#449169,#449341),#449392,.T.); +#449169 = FACE_BOUND('',#449170,.F.); +#449170 = EDGE_LOOP('',(#449171,#449182,#449190,#449198,#449206,#449214, + #449222,#449230,#449238,#449246,#449254,#449262,#449270,#449279, + #449287,#449295,#449303,#449311,#449319,#449327,#449335)); +#449171 = ORIENTED_EDGE('',*,*,#449172,.T.); +#449172 = EDGE_CURVE('',#449173,#449175,#449177,.T.); +#449173 = VERTEX_POINT('',#449174); +#449174 = CARTESIAN_POINT('',(135.585506,-61.218689,1.585)); +#449175 = VERTEX_POINT('',#449176); +#449176 = CARTESIAN_POINT('',(136.045983,-61.226521,1.585)); +#449177 = CIRCLE('',#449178,0.398777683503); +#449178 = AXIS2_PLACEMENT_3D('',#449179,#449180,#449181); +#449179 = CARTESIAN_POINT('',(135.81020778885,-61.54813208604,1.585)); +#449180 = DIRECTION('',(0.,0.,-1.)); +#449181 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#449182 = ORIENTED_EDGE('',*,*,#449183,.T.); +#449183 = EDGE_CURVE('',#449175,#449184,#449186,.T.); +#449184 = VERTEX_POINT('',#449185); +#449185 = CARTESIAN_POINT('',(136.067081,-61.25223,1.585)); +#449186 = LINE('',#449187,#449188); +#449187 = CARTESIAN_POINT('',(136.045983,-61.226521,1.585)); +#449188 = VECTOR('',#449189,1.); +#449189 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#449190 = ORIENTED_EDGE('',*,*,#449191,.T.); +#449191 = EDGE_CURVE('',#449184,#449192,#449194,.T.); +#449192 = VERTEX_POINT('',#449193); +#449193 = CARTESIAN_POINT('',(136.121177,-61.366377,1.585)); +#449194 = LINE('',#449195,#449196); +#449195 = CARTESIAN_POINT('',(136.067081,-61.25223,1.585)); +#449196 = VECTOR('',#449197,1.); +#449197 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#449198 = ORIENTED_EDGE('',*,*,#449199,.T.); +#449199 = EDGE_CURVE('',#449192,#449200,#449202,.T.); +#449200 = VERTEX_POINT('',#449201); +#449201 = CARTESIAN_POINT('',(136.121177,-61.490879,1.585)); +#449202 = LINE('',#449203,#449204); +#449203 = CARTESIAN_POINT('',(136.121177,-61.366377,1.585)); +#449204 = VECTOR('',#449205,1.); +#449205 = DIRECTION('',(0.,-1.,0.)); +#449206 = ORIENTED_EDGE('',*,*,#449207,.T.); +#449207 = EDGE_CURVE('',#449200,#449208,#449210,.T.); +#449208 = VERTEX_POINT('',#449209); +#449209 = CARTESIAN_POINT('',(136.100706,-61.529224,1.585)); +#449210 = LINE('',#449211,#449212); +#449211 = CARTESIAN_POINT('',(136.121177,-61.490879,1.585)); +#449212 = VECTOR('',#449213,1.); +#449213 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#449214 = ORIENTED_EDGE('',*,*,#449215,.T.); +#449215 = EDGE_CURVE('',#449208,#449216,#449218,.T.); +#449216 = VERTEX_POINT('',#449217); +#449217 = CARTESIAN_POINT('',(136.062326,-61.549791,1.585)); +#449218 = LINE('',#449219,#449220); +#449219 = CARTESIAN_POINT('',(136.100706,-61.529224,1.585)); +#449220 = VECTOR('',#449221,1.); +#449221 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#449222 = ORIENTED_EDGE('',*,*,#449223,.T.); +#449223 = EDGE_CURVE('',#449216,#449224,#449226,.T.); +#449224 = VERTEX_POINT('',#449225); +#449225 = CARTESIAN_POINT('',(135.646428,-61.63297,1.585)); +#449226 = LINE('',#449227,#449228); +#449227 = CARTESIAN_POINT('',(136.062326,-61.549791,1.585)); +#449228 = VECTOR('',#449229,1.); +#449229 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#449230 = ORIENTED_EDGE('',*,*,#449231,.T.); +#449231 = EDGE_CURVE('',#449224,#449232,#449234,.T.); +#449232 = VERTEX_POINT('',#449233); +#449233 = CARTESIAN_POINT('',(135.646428,-61.744256,1.585)); +#449234 = LINE('',#449235,#449236); +#449235 = CARTESIAN_POINT('',(135.646428,-61.63297,1.585)); +#449236 = VECTOR('',#449237,1.); +#449237 = DIRECTION('',(0.,-1.,0.)); +#449238 = ORIENTED_EDGE('',*,*,#449239,.T.); +#449239 = EDGE_CURVE('',#449232,#449240,#449242,.T.); +#449240 = VERTEX_POINT('',#449241); +#449241 = CARTESIAN_POINT('',(135.674948,-61.801298,1.585)); +#449242 = LINE('',#449243,#449244); +#449243 = CARTESIAN_POINT('',(135.646428,-61.744256,1.585)); +#449244 = VECTOR('',#449245,1.); +#449245 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#449246 = ORIENTED_EDGE('',*,*,#449247,.T.); +#449247 = EDGE_CURVE('',#449240,#449248,#449250,.T.); +#449248 = VERTEX_POINT('',#449249); +#449249 = CARTESIAN_POINT('',(135.73199,-61.829819,1.585)); +#449250 = LINE('',#449251,#449252); +#449251 = CARTESIAN_POINT('',(135.674948,-61.801298,1.585)); +#449252 = VECTOR('',#449253,1.); +#449253 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#449254 = ORIENTED_EDGE('',*,*,#449255,.T.); +#449255 = EDGE_CURVE('',#449248,#449256,#449258,.T.); +#449256 = VERTEX_POINT('',#449257); +#449257 = CARTESIAN_POINT('',(135.887056,-61.829819,1.585)); +#449258 = LINE('',#449259,#449260); +#449259 = CARTESIAN_POINT('',(135.73199,-61.829819,1.585)); +#449260 = VECTOR('',#449261,1.); +#449261 = DIRECTION('',(1.,0.,0.)); +#449262 = ORIENTED_EDGE('',*,*,#449263,.T.); +#449263 = EDGE_CURVE('',#449256,#449264,#449266,.T.); +#449264 = VERTEX_POINT('',#449265); +#449265 = CARTESIAN_POINT('',(135.980189,-61.784863,1.585)); +#449266 = LINE('',#449267,#449268); +#449267 = CARTESIAN_POINT('',(135.887056,-61.829819,1.585)); +#449268 = VECTOR('',#449269,1.); +#449269 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#449270 = ORIENTED_EDGE('',*,*,#449271,.T.); +#449271 = EDGE_CURVE('',#449264,#449272,#449274,.T.); +#449272 = VERTEX_POINT('',#449273); +#449273 = CARTESIAN_POINT('',(136.03354,-61.924282,1.585)); +#449274 = CIRCLE('',#449275,7.500029440468E-02); +#449275 = AXIS2_PLACEMENT_3D('',#449276,#449277,#449278); +#449276 = CARTESIAN_POINT('',(135.99999835132,-61.85719994603,1.585)); +#449277 = DIRECTION('',(0.,0.,-1.)); +#449278 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#449279 = ORIENTED_EDGE('',*,*,#449280,.T.); +#449280 = EDGE_CURVE('',#449272,#449281,#449283,.T.); +#449281 = VERTEX_POINT('',#449282); +#449282 = CARTESIAN_POINT('',(135.919393,-61.978378,1.585)); +#449283 = LINE('',#449284,#449285); +#449284 = CARTESIAN_POINT('',(136.03354,-61.924282,1.585)); +#449285 = VECTOR('',#449286,1.); +#449286 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#449287 = ORIENTED_EDGE('',*,*,#449288,.T.); +#449288 = EDGE_CURVE('',#449281,#449289,#449291,.T.); +#449289 = VERTEX_POINT('',#449290); +#449290 = CARTESIAN_POINT('',(135.694475,-61.977156,1.585)); +#449291 = LINE('',#449292,#449293); +#449292 = CARTESIAN_POINT('',(135.919393,-61.978378,1.585)); +#449293 = VECTOR('',#449294,1.); +#449294 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#449295 = ORIENTED_EDGE('',*,*,#449296,.T.); +#449296 = EDGE_CURVE('',#449289,#449297,#449299,.T.); +#449297 = VERTEX_POINT('',#449298); +#449298 = CARTESIAN_POINT('',(135.573063,-61.91645,1.585)); +#449299 = LINE('',#449300,#449301); +#449300 = CARTESIAN_POINT('',(135.694475,-61.977156,1.585)); +#449301 = VECTOR('',#449302,1.); +#449302 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#449303 = ORIENTED_EDGE('',*,*,#449304,.T.); +#449304 = EDGE_CURVE('',#449297,#449305,#449307,.T.); +#449305 = VERTEX_POINT('',#449306); +#449306 = CARTESIAN_POINT('',(135.551965,-61.890741,1.585)); +#449307 = LINE('',#449308,#449309); +#449308 = CARTESIAN_POINT('',(135.573063,-61.91645,1.585)); +#449309 = VECTOR('',#449310,1.); +#449310 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#449311 = ORIENTED_EDGE('',*,*,#449312,.T.); +#449312 = EDGE_CURVE('',#449305,#449313,#449315,.T.); +#449313 = VERTEX_POINT('',#449314); +#449314 = CARTESIAN_POINT('',(135.497869,-61.776593,1.585)); +#449315 = LINE('',#449316,#449317); +#449316 = CARTESIAN_POINT('',(135.551965,-61.890741,1.585)); +#449317 = VECTOR('',#449318,1.); +#449318 = DIRECTION('',(-0.428253767082,0.903658514584,0.)); +#449319 = ORIENTED_EDGE('',*,*,#449320,.T.); +#449320 = EDGE_CURVE('',#449313,#449321,#449323,.T.); +#449321 = VERTEX_POINT('',#449322); +#449322 = CARTESIAN_POINT('',(135.499091,-61.3612,1.585)); +#449323 = LINE('',#449324,#449325); +#449324 = CARTESIAN_POINT('',(135.497869,-61.776593,1.585)); +#449325 = VECTOR('',#449326,1.); +#449326 = DIRECTION('',(2.941779741925E-03,0.999995672957,0.)); +#449327 = ORIENTED_EDGE('',*,*,#449328,.T.); +#449328 = EDGE_CURVE('',#449321,#449329,#449331,.T.); +#449329 = VERTEX_POINT('',#449330); +#449330 = CARTESIAN_POINT('',(135.559797,-61.239787,1.585)); +#449331 = LINE('',#449332,#449333); +#449332 = CARTESIAN_POINT('',(135.499091,-61.3612,1.585)); +#449333 = VECTOR('',#449334,1.); +#449334 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#449335 = ORIENTED_EDGE('',*,*,#449336,.T.); +#449336 = EDGE_CURVE('',#449329,#449173,#449337,.T.); +#449337 = LINE('',#449338,#449339); +#449338 = CARTESIAN_POINT('',(135.559797,-61.239787,1.585)); +#449339 = VECTOR('',#449340,1.); +#449340 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#449341 = FACE_BOUND('',#449342,.F.); +#449342 = EDGE_LOOP('',(#449343,#449354,#449362,#449370,#449378,#449386) + ); +#449343 = ORIENTED_EDGE('',*,*,#449344,.T.); +#449344 = EDGE_CURVE('',#449345,#449347,#449349,.T.); +#449345 = VERTEX_POINT('',#449346); +#449346 = CARTESIAN_POINT('',(135.944097,-61.341672,1.585)); +#449347 = VERTEX_POINT('',#449348); +#449348 = CARTESIAN_POINT('',(135.674948,-61.341672,1.585)); +#449349 = CIRCLE('',#449350,0.239283669194); +#449350 = AXIS2_PLACEMENT_3D('',#449351,#449352,#449353); +#449351 = CARTESIAN_POINT('',(135.8095225,-61.53952643713,1.585)); +#449352 = DIRECTION('',(0.,0.,1.)); +#449353 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#449354 = ORIENTED_EDGE('',*,*,#449355,.T.); +#449355 = EDGE_CURVE('',#449347,#449356,#449358,.T.); +#449356 = VERTEX_POINT('',#449357); +#449357 = CARTESIAN_POINT('',(135.646428,-61.398714,1.585)); +#449358 = LINE('',#449359,#449360); +#449359 = CARTESIAN_POINT('',(135.674948,-61.341672,1.585)); +#449360 = VECTOR('',#449361,1.); +#449361 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#449362 = ORIENTED_EDGE('',*,*,#449363,.T.); +#449363 = EDGE_CURVE('',#449356,#449364,#449366,.T.); +#449364 = VERTEX_POINT('',#449365); +#449365 = CARTESIAN_POINT('',(135.646428,-61.479999,1.585)); +#449366 = LINE('',#449367,#449368); +#449367 = CARTESIAN_POINT('',(135.646428,-61.398714,1.585)); +#449368 = VECTOR('',#449369,1.); +#449369 = DIRECTION('',(0.,-1.,0.)); +#449370 = ORIENTED_EDGE('',*,*,#449371,.T.); +#449371 = EDGE_CURVE('',#449364,#449372,#449374,.T.); +#449372 = VERTEX_POINT('',#449373); +#449373 = CARTESIAN_POINT('',(135.972618,-61.414762,1.585)); +#449374 = LINE('',#449375,#449376); +#449375 = CARTESIAN_POINT('',(135.646428,-61.479999,1.585)); +#449376 = VECTOR('',#449377,1.); +#449377 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#449378 = ORIENTED_EDGE('',*,*,#449379,.T.); +#449379 = EDGE_CURVE('',#449372,#449380,#449382,.T.); +#449380 = VERTEX_POINT('',#449381); +#449381 = CARTESIAN_POINT('',(135.972618,-61.398714,1.585)); +#449382 = LINE('',#449383,#449384); +#449383 = CARTESIAN_POINT('',(135.972618,-61.414762,1.585)); +#449384 = VECTOR('',#449385,1.); +#449385 = DIRECTION('',(0.,1.,0.)); +#449386 = ORIENTED_EDGE('',*,*,#449387,.T.); +#449387 = EDGE_CURVE('',#449380,#449345,#449388,.T.); +#449388 = LINE('',#449389,#449390); +#449389 = CARTESIAN_POINT('',(135.972618,-61.398714,1.585)); +#449390 = VECTOR('',#449391,1.); +#449391 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#449392 = PLANE('',#449393); +#449393 = AXIS2_PLACEMENT_3D('',#449394,#449395,#449396); +#449394 = CARTESIAN_POINT('',(0.,0.,1.585)); +#449395 = DIRECTION('',(0.,0.,1.)); +#449396 = DIRECTION('',(1.,0.,-0.)); +#449397 = SHELL_BASED_SURFACE_MODEL('',(#449398)); +#449398 = OPEN_SHELL('',(#449399)); +#449399 = ADVANCED_FACE('',(#449400),#449558,.T.); +#449400 = FACE_BOUND('',#449401,.F.); +#449401 = EDGE_LOOP('',(#449402,#449413,#449421,#449429,#449437,#449445, + #449454,#449462,#449471,#449479,#449487,#449495,#449503,#449511, + #449519,#449527,#449536,#449544,#449552)); +#449402 = ORIENTED_EDGE('',*,*,#449403,.T.); +#449403 = EDGE_CURVE('',#449404,#449406,#449408,.T.); +#449404 = VERTEX_POINT('',#449405); +#449405 = CARTESIAN_POINT('',(136.434522,-61.175792,1.585)); +#449406 = VERTEX_POINT('',#449407); +#449407 = CARTESIAN_POINT('',(136.537259,-61.195193,1.585)); +#449408 = CIRCLE('',#449409,7.440760172333E-02); +#449409 = AXIS2_PLACEMENT_3D('',#449410,#449411,#449412); +#449410 = CARTESIAN_POINT('',(136.47606506572,-61.23752258305,1.585)); +#449411 = DIRECTION('',(0.,0.,-1.)); +#449412 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#449413 = ORIENTED_EDGE('',*,*,#449414,.T.); +#449414 = EDGE_CURVE('',#449406,#449415,#449417,.T.); +#449415 = VERTEX_POINT('',#449416); +#449416 = CARTESIAN_POINT('',(136.604415,-61.164593,1.585)); +#449417 = LINE('',#449418,#449419); +#449418 = CARTESIAN_POINT('',(136.537259,-61.195193,1.585)); +#449419 = VECTOR('',#449420,1.); +#449420 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#449421 = ORIENTED_EDGE('',*,*,#449422,.T.); +#449422 = EDGE_CURVE('',#449415,#449423,#449425,.T.); +#449423 = VERTEX_POINT('',#449424); +#449424 = CARTESIAN_POINT('',(136.776536,-61.164593,1.585)); +#449425 = LINE('',#449426,#449427); +#449426 = CARTESIAN_POINT('',(136.604415,-61.164593,1.585)); +#449427 = VECTOR('',#449428,1.); +#449428 = DIRECTION('',(1.,0.,0.)); +#449429 = ORIENTED_EDGE('',*,*,#449430,.T.); +#449430 = EDGE_CURVE('',#449423,#449431,#449433,.T.); +#449431 = VERTEX_POINT('',#449432); +#449432 = CARTESIAN_POINT('',(136.903126,-61.226521,1.585)); +#449433 = LINE('',#449434,#449435); +#449434 = CARTESIAN_POINT('',(136.776536,-61.164593,1.585)); +#449435 = VECTOR('',#449436,1.); +#449436 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#449437 = ORIENTED_EDGE('',*,*,#449438,.T.); +#449438 = EDGE_CURVE('',#449431,#449439,#449441,.T.); +#449439 = VERTEX_POINT('',#449440); +#449440 = CARTESIAN_POINT('',(136.924224,-61.25223,1.585)); +#449441 = LINE('',#449442,#449443); +#449442 = CARTESIAN_POINT('',(136.903126,-61.226521,1.585)); +#449443 = VECTOR('',#449444,1.); +#449444 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#449445 = ORIENTED_EDGE('',*,*,#449446,.T.); +#449446 = EDGE_CURVE('',#449439,#449447,#449449,.T.); +#449447 = VERTEX_POINT('',#449448); +#449448 = CARTESIAN_POINT('',(136.967121,-61.946487,1.585)); +#449449 = CIRCLE('',#449450,0.780466291445); +#449450 = AXIS2_PLACEMENT_3D('',#449451,#449452,#449453); +#449451 = CARTESIAN_POINT('',(136.2483112213,-61.64244730828,1.585)); +#449452 = DIRECTION('',(0.,0.,-1.)); +#449453 = DIRECTION('',(0.86603711922,0.499979707721,0.)); +#449454 = ORIENTED_EDGE('',*,*,#449455,.T.); +#449455 = EDGE_CURVE('',#449447,#449456,#449458,.T.); +#449456 = VERTEX_POINT('',#449457); +#449457 = CARTESIAN_POINT('',(136.946429,-61.967179,1.585)); +#449458 = LINE('',#449459,#449460); +#449459 = CARTESIAN_POINT('',(136.967121,-61.946487,1.585)); +#449460 = VECTOR('',#449461,1.); +#449461 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#449462 = ORIENTED_EDGE('',*,*,#449463,.T.); +#449463 = EDGE_CURVE('',#449456,#449464,#449466,.T.); +#449464 = VERTEX_POINT('',#449465); +#449465 = CARTESIAN_POINT('',(136.829761,-61.904819,1.585)); +#449466 = CIRCLE('',#449467,7.499979580331E-02); +#449467 = AXIS2_PLACEMENT_3D('',#449468,#449469,#449470); +#449468 = CARTESIAN_POINT('',(136.9047607958,-61.90481931647,1.585)); +#449469 = DIRECTION('',(-0.,0.,-1.)); +#449470 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#449471 = ORIENTED_EDGE('',*,*,#449472,.T.); +#449472 = EDGE_CURVE('',#449464,#449473,#449475,.T.); +#449473 = VERTEX_POINT('',#449474); +#449474 = CARTESIAN_POINT('',(136.829761,-61.398714,1.585)); +#449475 = LINE('',#449476,#449477); +#449476 = CARTESIAN_POINT('',(136.829761,-61.904819,1.585)); +#449477 = VECTOR('',#449478,1.); +#449478 = DIRECTION('',(0.,1.,0.)); +#449479 = ORIENTED_EDGE('',*,*,#449480,.T.); +#449480 = EDGE_CURVE('',#449473,#449481,#449483,.T.); +#449481 = VERTEX_POINT('',#449482); +#449482 = CARTESIAN_POINT('',(136.80124,-61.341672,1.585)); +#449483 = LINE('',#449484,#449485); +#449484 = CARTESIAN_POINT('',(136.829761,-61.398714,1.585)); +#449485 = VECTOR('',#449486,1.); +#449486 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#449487 = ORIENTED_EDGE('',*,*,#449488,.T.); +#449488 = EDGE_CURVE('',#449481,#449489,#449491,.T.); +#449489 = VERTEX_POINT('',#449490); +#449490 = CARTESIAN_POINT('',(136.744199,-61.313152,1.585)); +#449491 = LINE('',#449492,#449493); +#449492 = CARTESIAN_POINT('',(136.80124,-61.341672,1.585)); +#449493 = VECTOR('',#449494,1.); +#449494 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#449495 = ORIENTED_EDGE('',*,*,#449496,.T.); +#449496 = EDGE_CURVE('',#449489,#449497,#449499,.T.); +#449497 = VERTEX_POINT('',#449498); +#449498 = CARTESIAN_POINT('',(136.636752,-61.313152,1.585)); +#449499 = LINE('',#449500,#449501); +#449500 = CARTESIAN_POINT('',(136.744199,-61.313152,1.585)); +#449501 = VECTOR('',#449502,1.); +#449502 = DIRECTION('',(-1.,0.,0.)); +#449503 = ORIENTED_EDGE('',*,*,#449504,.T.); +#449504 = EDGE_CURVE('',#449497,#449505,#449507,.T.); +#449505 = VERTEX_POINT('',#449506); +#449506 = CARTESIAN_POINT('',(136.568236,-61.34741,1.585)); +#449507 = LINE('',#449508,#449509); +#449508 = CARTESIAN_POINT('',(136.636752,-61.313152,1.585)); +#449509 = VECTOR('',#449510,1.); +#449510 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#449511 = ORIENTED_EDGE('',*,*,#449512,.T.); +#449512 = EDGE_CURVE('',#449505,#449513,#449515,.T.); +#449513 = VERTEX_POINT('',#449514); +#449514 = CARTESIAN_POINT('',(136.55119,-61.364456,1.585)); +#449515 = LINE('',#449516,#449517); +#449516 = CARTESIAN_POINT('',(136.568236,-61.34741,1.585)); +#449517 = VECTOR('',#449518,1.); +#449518 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#449519 = ORIENTED_EDGE('',*,*,#449520,.T.); +#449520 = EDGE_CURVE('',#449513,#449521,#449523,.T.); +#449521 = VERTEX_POINT('',#449522); +#449522 = CARTESIAN_POINT('',(136.549749,-61.919451,1.585)); +#449523 = LINE('',#449524,#449525); +#449524 = CARTESIAN_POINT('',(136.55119,-61.364456,1.585)); +#449525 = VECTOR('',#449526,1.); +#449526 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#449527 = ORIENTED_EDGE('',*,*,#449528,.T.); +#449528 = EDGE_CURVE('',#449521,#449529,#449531,.T.); +#449529 = VERTEX_POINT('',#449530); +#449530 = CARTESIAN_POINT('',(136.40119,-61.904819,1.585)); +#449531 = CIRCLE('',#449532,7.500006711463E-02); +#449532 = AXIS2_PLACEMENT_3D('',#449533,#449534,#449535); +#449533 = CARTESIAN_POINT('',(136.47619006711,-61.90481906711,1.585)); +#449534 = DIRECTION('',(-0.,0.,-1.)); +#449535 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#449536 = ORIENTED_EDGE('',*,*,#449537,.T.); +#449537 = EDGE_CURVE('',#449529,#449538,#449540,.T.); +#449538 = VERTEX_POINT('',#449539); +#449539 = CARTESIAN_POINT('',(136.402631,-61.22352,1.585)); +#449540 = LINE('',#449541,#449542); +#449541 = CARTESIAN_POINT('',(136.40119,-61.904819,1.585)); +#449542 = VECTOR('',#449543,1.); +#449543 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#449544 = ORIENTED_EDGE('',*,*,#449545,.T.); +#449545 = EDGE_CURVE('',#449538,#449546,#449548,.T.); +#449546 = VERTEX_POINT('',#449547); +#449547 = CARTESIAN_POINT('',(136.41383,-61.196484,1.585)); +#449548 = LINE('',#449549,#449550); +#449549 = CARTESIAN_POINT('',(136.402631,-61.22352,1.585)); +#449550 = VECTOR('',#449551,1.); +#449551 = DIRECTION('',(0.382692828059,0.923875640631,0.)); +#449552 = ORIENTED_EDGE('',*,*,#449553,.T.); +#449553 = EDGE_CURVE('',#449546,#449404,#449554,.T.); +#449554 = LINE('',#449555,#449556); +#449555 = CARTESIAN_POINT('',(136.41383,-61.196484,1.585)); +#449556 = VECTOR('',#449557,1.); +#449557 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#449558 = PLANE('',#449559); +#449559 = AXIS2_PLACEMENT_3D('',#449560,#449561,#449562); +#449560 = CARTESIAN_POINT('',(0.,0.,1.585)); +#449561 = DIRECTION('',(0.,0.,1.)); +#449562 = DIRECTION('',(1.,0.,-0.)); +#449563 = SHELL_BASED_SURFACE_MODEL('',(#449564)); +#449564 = OPEN_SHELL('',(#449565)); +#449565 = ADVANCED_FACE('',(#449566),#449724,.T.); +#449566 = FACE_BOUND('',#449567,.F.); +#449567 = EDGE_LOOP('',(#449568,#449579,#449587,#449595,#449603,#449611, + #449620,#449628,#449637,#449645,#449653,#449661,#449669,#449677, + #449685,#449693,#449702,#449710,#449718)); +#449568 = ORIENTED_EDGE('',*,*,#449569,.T.); +#449569 = EDGE_CURVE('',#449570,#449572,#449574,.T.); +#449570 = VERTEX_POINT('',#449571); +#449571 = CARTESIAN_POINT('',(137.339284,-61.175792,1.585)); +#449572 = VERTEX_POINT('',#449573); +#449573 = CARTESIAN_POINT('',(137.442021,-61.195193,1.585)); +#449574 = CIRCLE('',#449575,7.440760172333E-02); +#449575 = AXIS2_PLACEMENT_3D('',#449576,#449577,#449578); +#449576 = CARTESIAN_POINT('',(137.38082706572,-61.23752258305,1.585)); +#449577 = DIRECTION('',(0.,0.,-1.)); +#449578 = DIRECTION('',(-0.558317493913,0.829627371771,0.)); +#449579 = ORIENTED_EDGE('',*,*,#449580,.T.); +#449580 = EDGE_CURVE('',#449572,#449581,#449583,.T.); +#449581 = VERTEX_POINT('',#449582); +#449582 = CARTESIAN_POINT('',(137.509177,-61.164593,1.585)); +#449583 = LINE('',#449584,#449585); +#449584 = CARTESIAN_POINT('',(137.442021,-61.195193,1.585)); +#449585 = VECTOR('',#449586,1.); +#449586 = DIRECTION('',(0.909985569749,0.414639919506,0.)); +#449587 = ORIENTED_EDGE('',*,*,#449588,.T.); +#449588 = EDGE_CURVE('',#449581,#449589,#449591,.T.); +#449589 = VERTEX_POINT('',#449590); +#449590 = CARTESIAN_POINT('',(137.681298,-61.164593,1.585)); +#449591 = LINE('',#449592,#449593); +#449592 = CARTESIAN_POINT('',(137.509177,-61.164593,1.585)); +#449593 = VECTOR('',#449594,1.); +#449594 = DIRECTION('',(1.,0.,0.)); +#449595 = ORIENTED_EDGE('',*,*,#449596,.T.); +#449596 = EDGE_CURVE('',#449589,#449597,#449599,.T.); +#449597 = VERTEX_POINT('',#449598); +#449598 = CARTESIAN_POINT('',(137.807888,-61.226521,1.585)); +#449599 = LINE('',#449600,#449601); +#449600 = CARTESIAN_POINT('',(137.681298,-61.164593,1.585)); +#449601 = VECTOR('',#449602,1.); +#449602 = DIRECTION('',(0.898273580441,-0.439436656051,0.)); +#449603 = ORIENTED_EDGE('',*,*,#449604,.T.); +#449604 = EDGE_CURVE('',#449597,#449605,#449607,.T.); +#449605 = VERTEX_POINT('',#449606); +#449606 = CARTESIAN_POINT('',(137.828986,-61.25223,1.585)); +#449607 = LINE('',#449608,#449609); +#449608 = CARTESIAN_POINT('',(137.807888,-61.226521,1.585)); +#449609 = VECTOR('',#449610,1.); +#449610 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#449611 = ORIENTED_EDGE('',*,*,#449612,.T.); +#449612 = EDGE_CURVE('',#449605,#449613,#449615,.T.); +#449613 = VERTEX_POINT('',#449614); +#449614 = CARTESIAN_POINT('',(137.871883,-61.946487,1.585)); +#449615 = CIRCLE('',#449616,0.780466291444); +#449616 = AXIS2_PLACEMENT_3D('',#449617,#449618,#449619); +#449617 = CARTESIAN_POINT('',(137.1530732213,-61.64244730828,1.585)); +#449618 = DIRECTION('',(0.,0.,-1.)); +#449619 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#449620 = ORIENTED_EDGE('',*,*,#449621,.T.); +#449621 = EDGE_CURVE('',#449613,#449622,#449624,.T.); +#449622 = VERTEX_POINT('',#449623); +#449623 = CARTESIAN_POINT('',(137.851191,-61.967179,1.585)); +#449624 = LINE('',#449625,#449626); +#449625 = CARTESIAN_POINT('',(137.871883,-61.946487,1.585)); +#449626 = VECTOR('',#449627,1.); +#449627 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#449628 = ORIENTED_EDGE('',*,*,#449629,.T.); +#449629 = EDGE_CURVE('',#449622,#449630,#449632,.T.); +#449630 = VERTEX_POINT('',#449631); +#449631 = CARTESIAN_POINT('',(137.734523,-61.904819,1.585)); +#449632 = CIRCLE('',#449633,7.499979580331E-02); +#449633 = AXIS2_PLACEMENT_3D('',#449634,#449635,#449636); +#449634 = CARTESIAN_POINT('',(137.8095227958,-61.90481931647,1.585)); +#449635 = DIRECTION('',(-0.,0.,-1.)); +#449636 = DIRECTION('',(0.555577568593,-0.831464710782,-0.)); +#449637 = ORIENTED_EDGE('',*,*,#449638,.T.); +#449638 = EDGE_CURVE('',#449630,#449639,#449641,.T.); +#449639 = VERTEX_POINT('',#449640); +#449640 = CARTESIAN_POINT('',(137.734523,-61.398714,1.585)); +#449641 = LINE('',#449642,#449643); +#449642 = CARTESIAN_POINT('',(137.734523,-61.904819,1.585)); +#449643 = VECTOR('',#449644,1.); +#449644 = DIRECTION('',(0.,1.,0.)); +#449645 = ORIENTED_EDGE('',*,*,#449646,.T.); +#449646 = EDGE_CURVE('',#449639,#449647,#449649,.T.); +#449647 = VERTEX_POINT('',#449648); +#449648 = CARTESIAN_POINT('',(137.706002,-61.341672,1.585)); +#449649 = LINE('',#449650,#449651); +#449650 = CARTESIAN_POINT('',(137.734523,-61.398714,1.585)); +#449651 = VECTOR('',#449652,1.); +#449652 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#449653 = ORIENTED_EDGE('',*,*,#449654,.T.); +#449654 = EDGE_CURVE('',#449647,#449655,#449657,.T.); +#449655 = VERTEX_POINT('',#449656); +#449656 = CARTESIAN_POINT('',(137.648961,-61.313152,1.585)); +#449657 = LINE('',#449658,#449659); +#449658 = CARTESIAN_POINT('',(137.706002,-61.341672,1.585)); +#449659 = VECTOR('',#449660,1.); +#449660 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#449661 = ORIENTED_EDGE('',*,*,#449662,.T.); +#449662 = EDGE_CURVE('',#449655,#449663,#449665,.T.); +#449663 = VERTEX_POINT('',#449664); +#449664 = CARTESIAN_POINT('',(137.541514,-61.313152,1.585)); +#449665 = LINE('',#449666,#449667); +#449666 = CARTESIAN_POINT('',(137.648961,-61.313152,1.585)); +#449667 = VECTOR('',#449668,1.); +#449668 = DIRECTION('',(-1.,0.,0.)); +#449669 = ORIENTED_EDGE('',*,*,#449670,.T.); +#449670 = EDGE_CURVE('',#449663,#449671,#449673,.T.); +#449671 = VERTEX_POINT('',#449672); +#449672 = CARTESIAN_POINT('',(137.472998,-61.34741,1.585)); +#449673 = LINE('',#449674,#449675); +#449674 = CARTESIAN_POINT('',(137.541514,-61.313152,1.585)); +#449675 = VECTOR('',#449676,1.); +#449676 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#449677 = ORIENTED_EDGE('',*,*,#449678,.T.); +#449678 = EDGE_CURVE('',#449671,#449679,#449681,.T.); +#449679 = VERTEX_POINT('',#449680); +#449680 = CARTESIAN_POINT('',(137.455952,-61.364456,1.585)); +#449681 = LINE('',#449682,#449683); +#449682 = CARTESIAN_POINT('',(137.472998,-61.34741,1.585)); +#449683 = VECTOR('',#449684,1.); +#449684 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#449685 = ORIENTED_EDGE('',*,*,#449686,.T.); +#449686 = EDGE_CURVE('',#449679,#449687,#449689,.T.); +#449687 = VERTEX_POINT('',#449688); +#449688 = CARTESIAN_POINT('',(137.454511,-61.919451,1.585)); +#449689 = LINE('',#449690,#449691); +#449690 = CARTESIAN_POINT('',(137.455952,-61.364456,1.585)); +#449691 = VECTOR('',#449692,1.); +#449692 = DIRECTION('',(-2.596411035863E-03,-0.999996629319,0.)); +#449693 = ORIENTED_EDGE('',*,*,#449694,.T.); +#449694 = EDGE_CURVE('',#449687,#449695,#449697,.T.); +#449695 = VERTEX_POINT('',#449696); +#449696 = CARTESIAN_POINT('',(137.305952,-61.904819,1.585)); +#449697 = CIRCLE('',#449698,7.500006711464E-02); +#449698 = AXIS2_PLACEMENT_3D('',#449699,#449700,#449701); +#449699 = CARTESIAN_POINT('',(137.38095206711,-61.90481906711,1.585)); +#449700 = DIRECTION('',(-0.,0.,-1.)); +#449701 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#449702 = ORIENTED_EDGE('',*,*,#449703,.T.); +#449703 = EDGE_CURVE('',#449695,#449704,#449706,.T.); +#449704 = VERTEX_POINT('',#449705); +#449705 = CARTESIAN_POINT('',(137.307393,-61.22352,1.585)); +#449706 = LINE('',#449707,#449708); +#449707 = CARTESIAN_POINT('',(137.305952,-61.904819,1.585)); +#449708 = VECTOR('',#449709,1.); +#449709 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#449710 = ORIENTED_EDGE('',*,*,#449711,.T.); +#449711 = EDGE_CURVE('',#449704,#449712,#449714,.T.); +#449712 = VERTEX_POINT('',#449713); +#449713 = CARTESIAN_POINT('',(137.318592,-61.196484,1.585)); +#449714 = LINE('',#449715,#449716); +#449715 = CARTESIAN_POINT('',(137.307393,-61.22352,1.585)); +#449716 = VECTOR('',#449717,1.); +#449717 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#449718 = ORIENTED_EDGE('',*,*,#449719,.T.); +#449719 = EDGE_CURVE('',#449712,#449570,#449720,.T.); +#449720 = LINE('',#449721,#449722); +#449721 = CARTESIAN_POINT('',(137.318592,-61.196484,1.585)); +#449722 = VECTOR('',#449723,1.); +#449723 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#449724 = PLANE('',#449725); +#449725 = AXIS2_PLACEMENT_3D('',#449726,#449727,#449728); +#449726 = CARTESIAN_POINT('',(0.,0.,1.585)); +#449727 = DIRECTION('',(0.,0.,1.)); +#449728 = DIRECTION('',(1.,0.,-0.)); +#449729 = SHELL_BASED_SURFACE_MODEL('',(#449730)); +#449730 = OPEN_SHELL('',(#449731)); +#449731 = ADVANCED_FACE('',(#449732,#449914),#449973,.T.); +#449732 = FACE_BOUND('',#449733,.F.); +#449733 = EDGE_LOOP('',(#449734,#449745,#449753,#449762,#449770,#449779, + #449787,#449795,#449803,#449811,#449819,#449827,#449835,#449843, + #449851,#449859,#449867,#449875,#449883,#449891,#449899,#449907)); +#449734 = ORIENTED_EDGE('',*,*,#449735,.T.); +#449735 = EDGE_CURVE('',#449736,#449738,#449740,.T.); +#449736 = VERTEX_POINT('',#449737); +#449737 = CARTESIAN_POINT('',(138.252173,-61.218689,1.585)); +#449738 = VERTEX_POINT('',#449739); +#449739 = CARTESIAN_POINT('',(138.71265,-61.226521,1.585)); +#449740 = CIRCLE('',#449741,0.398777683503); +#449741 = AXIS2_PLACEMENT_3D('',#449742,#449743,#449744); +#449742 = CARTESIAN_POINT('',(138.47687478885,-61.54813208604,1.585)); +#449743 = DIRECTION('',(0.,0.,-1.)); +#449744 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#449745 = ORIENTED_EDGE('',*,*,#449746,.T.); +#449746 = EDGE_CURVE('',#449738,#449747,#449749,.T.); +#449747 = VERTEX_POINT('',#449748); +#449748 = CARTESIAN_POINT('',(138.733748,-61.25223,1.585)); +#449749 = LINE('',#449750,#449751); +#449750 = CARTESIAN_POINT('',(138.71265,-61.226521,1.585)); +#449751 = VECTOR('',#449752,1.); +#449752 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#449753 = ORIENTED_EDGE('',*,*,#449754,.T.); +#449754 = EDGE_CURVE('',#449747,#449755,#449757,.T.); +#449755 = VERTEX_POINT('',#449756); +#449756 = CARTESIAN_POINT('',(138.776645,-61.946487,1.585)); +#449757 = CIRCLE('',#449758,0.780466291444); +#449758 = AXIS2_PLACEMENT_3D('',#449759,#449760,#449761); +#449759 = CARTESIAN_POINT('',(138.0578352213,-61.64244730828,1.585)); +#449760 = DIRECTION('',(0.,0.,-1.)); +#449761 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#449762 = ORIENTED_EDGE('',*,*,#449763,.T.); +#449763 = EDGE_CURVE('',#449755,#449764,#449766,.T.); +#449764 = VERTEX_POINT('',#449765); +#449765 = CARTESIAN_POINT('',(138.755953,-61.967179,1.585)); +#449766 = LINE('',#449767,#449768); +#449767 = CARTESIAN_POINT('',(138.776645,-61.946487,1.585)); +#449768 = VECTOR('',#449769,1.); +#449769 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#449770 = ORIENTED_EDGE('',*,*,#449771,.T.); +#449771 = EDGE_CURVE('',#449764,#449772,#449774,.T.); +#449772 = VERTEX_POINT('',#449773); +#449773 = CARTESIAN_POINT('',(138.669088,-61.96365,1.585)); +#449774 = CIRCLE('',#449775,7.337228534666E-02); +#449775 = AXIS2_PLACEMENT_3D('',#449776,#449777,#449778); +#449776 = CARTESIAN_POINT('',(138.71491994045,-61.90635318079,1.585)); +#449777 = DIRECTION('',(-0.,0.,-1.)); +#449778 = DIRECTION('',(0.55924467048,-0.829002652915,-0.)); +#449779 = ORIENTED_EDGE('',*,*,#449780,.T.); +#449780 = EDGE_CURVE('',#449772,#449781,#449783,.T.); +#449781 = VERTEX_POINT('',#449782); +#449782 = CARTESIAN_POINT('',(138.633679,-61.978378,1.585)); +#449783 = LINE('',#449784,#449785); +#449784 = CARTESIAN_POINT('',(138.669088,-61.96365,1.585)); +#449785 = VECTOR('',#449786,1.); +#449786 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#449787 = ORIENTED_EDGE('',*,*,#449788,.T.); +#449788 = EDGE_CURVE('',#449781,#449789,#449791,.T.); +#449789 = VERTEX_POINT('',#449790); +#449790 = CARTESIAN_POINT('',(138.361142,-61.977156,1.585)); +#449791 = LINE('',#449792,#449793); +#449792 = CARTESIAN_POINT('',(138.633679,-61.978378,1.585)); +#449793 = VECTOR('',#449794,1.); +#449794 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#449795 = ORIENTED_EDGE('',*,*,#449796,.T.); +#449796 = EDGE_CURVE('',#449789,#449797,#449799,.T.); +#449797 = VERTEX_POINT('',#449798); +#449798 = CARTESIAN_POINT('',(138.23973,-61.91645,1.585)); +#449799 = LINE('',#449800,#449801); +#449800 = CARTESIAN_POINT('',(138.361142,-61.977156,1.585)); +#449801 = VECTOR('',#449802,1.); +#449802 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#449803 = ORIENTED_EDGE('',*,*,#449804,.T.); +#449804 = EDGE_CURVE('',#449797,#449805,#449807,.T.); +#449805 = VERTEX_POINT('',#449806); +#449806 = CARTESIAN_POINT('',(138.218632,-61.890741,1.585)); +#449807 = LINE('',#449808,#449809); +#449808 = CARTESIAN_POINT('',(138.23973,-61.91645,1.585)); +#449809 = VECTOR('',#449810,1.); +#449810 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#449811 = ORIENTED_EDGE('',*,*,#449812,.T.); +#449812 = EDGE_CURVE('',#449805,#449813,#449815,.T.); +#449813 = VERTEX_POINT('',#449814); +#449814 = CARTESIAN_POINT('',(138.164536,-61.776593,1.585)); +#449815 = LINE('',#449816,#449817); +#449816 = CARTESIAN_POINT('',(138.218632,-61.890741,1.585)); +#449817 = VECTOR('',#449818,1.); +#449818 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#449819 = ORIENTED_EDGE('',*,*,#449820,.T.); +#449820 = EDGE_CURVE('',#449813,#449821,#449823,.T.); +#449821 = VERTEX_POINT('',#449822); +#449822 = CARTESIAN_POINT('',(138.165758,-61.646914,1.585)); +#449823 = LINE('',#449824,#449825); +#449824 = CARTESIAN_POINT('',(138.164536,-61.776593,1.585)); +#449825 = VECTOR('',#449826,1.); +#449826 = DIRECTION('',(9.422849868194E-03,0.999955603965,0.)); +#449827 = ORIENTED_EDGE('',*,*,#449828,.T.); +#449828 = EDGE_CURVE('',#449821,#449829,#449831,.T.); +#449829 = VERTEX_POINT('',#449830); +#449830 = CARTESIAN_POINT('',(138.226464,-61.525501,1.585)); +#449831 = LINE('',#449832,#449833); +#449832 = CARTESIAN_POINT('',(138.165758,-61.646914,1.585)); +#449833 = VECTOR('',#449834,1.); +#449834 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#449835 = ORIENTED_EDGE('',*,*,#449836,.T.); +#449836 = EDGE_CURVE('',#449829,#449837,#449839,.T.); +#449837 = VERTEX_POINT('',#449838); +#449838 = CARTESIAN_POINT('',(138.252173,-61.504403,1.585)); +#449839 = LINE('',#449840,#449841); +#449840 = CARTESIAN_POINT('',(138.226464,-61.525501,1.585)); +#449841 = VECTOR('',#449842,1.); +#449842 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#449843 = ORIENTED_EDGE('',*,*,#449844,.T.); +#449844 = EDGE_CURVE('',#449837,#449845,#449847,.T.); +#449845 = VERTEX_POINT('',#449846); +#449846 = CARTESIAN_POINT('',(138.36632,-61.450307,1.585)); +#449847 = LINE('',#449848,#449849); +#449848 = CARTESIAN_POINT('',(138.252173,-61.504403,1.585)); +#449849 = VECTOR('',#449850,1.); +#449850 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#449851 = ORIENTED_EDGE('',*,*,#449852,.T.); +#449852 = EDGE_CURVE('',#449845,#449853,#449855,.T.); +#449853 = VERTEX_POINT('',#449854); +#449854 = CARTESIAN_POINT('',(138.601342,-61.448866,1.585)); +#449855 = LINE('',#449856,#449857); +#449856 = CARTESIAN_POINT('',(138.36632,-61.450307,1.585)); +#449857 = VECTOR('',#449858,1.); +#449858 = DIRECTION('',(0.999981203859,6.1312256502E-03,0.)); +#449859 = ORIENTED_EDGE('',*,*,#449860,.T.); +#449860 = EDGE_CURVE('',#449853,#449861,#449863,.T.); +#449861 = VERTEX_POINT('',#449862); +#449862 = CARTESIAN_POINT('',(138.639285,-61.429894,1.585)); +#449863 = LINE('',#449864,#449865); +#449864 = CARTESIAN_POINT('',(138.601342,-61.448866,1.585)); +#449865 = VECTOR('',#449866,1.); +#449866 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#449867 = ORIENTED_EDGE('',*,*,#449868,.T.); +#449868 = EDGE_CURVE('',#449861,#449869,#449871,.T.); +#449869 = VERTEX_POINT('',#449870); +#449870 = CARTESIAN_POINT('',(138.639285,-61.398714,1.585)); +#449871 = LINE('',#449872,#449873); +#449872 = CARTESIAN_POINT('',(138.639285,-61.429894,1.585)); +#449873 = VECTOR('',#449874,1.); +#449874 = DIRECTION('',(0.,1.,0.)); +#449875 = ORIENTED_EDGE('',*,*,#449876,.T.); +#449876 = EDGE_CURVE('',#449869,#449877,#449879,.T.); +#449877 = VERTEX_POINT('',#449878); +#449878 = CARTESIAN_POINT('',(138.610764,-61.341672,1.585)); +#449879 = LINE('',#449880,#449881); +#449880 = CARTESIAN_POINT('',(138.639285,-61.398714,1.585)); +#449881 = VECTOR('',#449882,1.); +#449882 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#449883 = ORIENTED_EDGE('',*,*,#449884,.T.); +#449884 = EDGE_CURVE('',#449877,#449885,#449887,.T.); +#449885 = VERTEX_POINT('',#449886); +#449886 = CARTESIAN_POINT('',(138.553723,-61.313152,1.585)); +#449887 = LINE('',#449888,#449889); +#449888 = CARTESIAN_POINT('',(138.610764,-61.341672,1.585)); +#449889 = VECTOR('',#449890,1.); +#449890 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#449891 = ORIENTED_EDGE('',*,*,#449892,.T.); +#449892 = EDGE_CURVE('',#449885,#449893,#449895,.T.); +#449893 = VERTEX_POINT('',#449894); +#449894 = CARTESIAN_POINT('',(138.398657,-61.313152,1.585)); +#449895 = LINE('',#449896,#449897); +#449896 = CARTESIAN_POINT('',(138.553723,-61.313152,1.585)); +#449897 = VECTOR('',#449898,1.); +#449898 = DIRECTION('',(-1.,0.,0.)); +#449899 = ORIENTED_EDGE('',*,*,#449900,.T.); +#449900 = EDGE_CURVE('',#449893,#449901,#449903,.T.); +#449901 = VERTEX_POINT('',#449902); +#449902 = CARTESIAN_POINT('',(138.305523,-61.358108,1.585)); +#449903 = LINE('',#449904,#449905); +#449904 = CARTESIAN_POINT('',(138.398657,-61.313152,1.585)); +#449905 = VECTOR('',#449906,1.); +#449906 = DIRECTION('',(-0.900571478219,-0.43470796245,0.)); +#449907 = ORIENTED_EDGE('',*,*,#449908,.T.); +#449908 = EDGE_CURVE('',#449901,#449736,#449909,.T.); +#449909 = CIRCLE('',#449910,7.500005272361E-02); +#449910 = AXIS2_PLACEMENT_3D('',#449911,#449912,#449913); +#449911 = CARTESIAN_POINT('',(138.28571355676,-61.28577132972,1.585)); +#449912 = DIRECTION('',(0.,0.,-1.)); +#449913 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#449914 = FACE_BOUND('',#449915,.F.); +#449915 = EDGE_LOOP('',(#449916,#449926,#449934,#449942,#449950,#449959, + #449967)); +#449916 = ORIENTED_EDGE('',*,*,#449917,.T.); +#449917 = EDGE_CURVE('',#449918,#449920,#449922,.T.); +#449918 = VERTEX_POINT('',#449919); +#449919 = CARTESIAN_POINT('',(138.601342,-61.829819,1.585)); +#449920 = VERTEX_POINT('',#449921); +#449921 = CARTESIAN_POINT('',(138.639285,-61.810847,1.585)); +#449922 = LINE('',#449923,#449924); +#449923 = CARTESIAN_POINT('',(138.601342,-61.829819,1.585)); +#449924 = VECTOR('',#449925,1.); +#449925 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#449926 = ORIENTED_EDGE('',*,*,#449927,.T.); +#449927 = EDGE_CURVE('',#449920,#449928,#449930,.T.); +#449928 = VERTEX_POINT('',#449929); +#449929 = CARTESIAN_POINT('',(138.638856,-61.596203,1.585)); +#449930 = LINE('',#449931,#449932); +#449931 = CARTESIAN_POINT('',(138.639285,-61.810847,1.585)); +#449932 = VECTOR('',#449933,1.); +#449933 = DIRECTION('',(-1.99865425146E-03,0.999998002689,0.)); +#449934 = ORIENTED_EDGE('',*,*,#449935,.T.); +#449935 = EDGE_CURVE('',#449928,#449936,#449938,.T.); +#449936 = VERTEX_POINT('',#449937); +#449937 = CARTESIAN_POINT('',(138.398657,-61.598866,1.585)); +#449938 = LINE('',#449939,#449940); +#449939 = CARTESIAN_POINT('',(138.638856,-61.596203,1.585)); +#449940 = VECTOR('',#449941,1.); +#449941 = DIRECTION('',(-0.999938548864,-1.108595937378E-02,0.)); +#449942 = ORIENTED_EDGE('',*,*,#449943,.T.); +#449943 = EDGE_CURVE('',#449936,#449944,#449946,.T.); +#449944 = VERTEX_POINT('',#449945); +#449945 = CARTESIAN_POINT('',(138.341615,-61.627386,1.585)); +#449946 = LINE('',#449947,#449948); +#449947 = CARTESIAN_POINT('',(138.398657,-61.598866,1.585)); +#449948 = VECTOR('',#449949,1.); +#449949 = DIRECTION('',(-0.894433463016,-0.447201051247,0.)); +#449950 = ORIENTED_EDGE('',*,*,#449951,.T.); +#449951 = EDGE_CURVE('',#449944,#449952,#449954,.T.); +#449952 = VERTEX_POINT('',#449953); +#449953 = CARTESIAN_POINT('',(138.341615,-61.801298,1.585)); +#449954 = CIRCLE('',#449955,0.13450278439); +#449955 = AXIS2_PLACEMENT_3D('',#449956,#449957,#449958); +#449956 = CARTESIAN_POINT('',(138.44422909782,-61.714342,1.585)); +#449957 = DIRECTION('',(0.,0.,1.)); +#449958 = DIRECTION('',(-0.762914301674,0.646499627456,0.)); +#449959 = ORIENTED_EDGE('',*,*,#449960,.T.); +#449960 = EDGE_CURVE('',#449952,#449961,#449963,.T.); +#449961 = VERTEX_POINT('',#449962); +#449962 = CARTESIAN_POINT('',(138.398657,-61.829819,1.585)); +#449963 = LINE('',#449964,#449965); +#449964 = CARTESIAN_POINT('',(138.341615,-61.801298,1.585)); +#449965 = VECTOR('',#449966,1.); +#449966 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#449967 = ORIENTED_EDGE('',*,*,#449968,.T.); +#449968 = EDGE_CURVE('',#449961,#449918,#449969,.T.); +#449969 = LINE('',#449970,#449971); +#449970 = CARTESIAN_POINT('',(138.398657,-61.829819,1.585)); +#449971 = VECTOR('',#449972,1.); +#449972 = DIRECTION('',(1.,0.,0.)); +#449973 = PLANE('',#449974); +#449974 = AXIS2_PLACEMENT_3D('',#449975,#449976,#449977); +#449975 = CARTESIAN_POINT('',(0.,0.,1.585)); +#449976 = DIRECTION('',(0.,0.,1.)); +#449977 = DIRECTION('',(1.,0.,-0.)); +#449978 = SHELL_BASED_SURFACE_MODEL('',(#449979)); +#449979 = OPEN_SHELL('',(#449980)); +#449980 = ADVANCED_FACE('',(#449981),#450083,.T.); +#449981 = FACE_BOUND('',#449982,.F.); +#449982 = EDGE_LOOP('',(#449983,#449994,#450002,#450010,#450018,#450027, + #450035,#450044,#450052,#450061,#450069,#450077)); +#449983 = ORIENTED_EDGE('',*,*,#449984,.T.); +#449984 = EDGE_CURVE('',#449985,#449987,#449989,.T.); +#449985 = VERTEX_POINT('',#449986); +#449986 = CARTESIAN_POINT('',(140.767856,-61.175792,1.585)); +#449987 = VERTEX_POINT('',#449988); +#449988 = CARTESIAN_POINT('',(140.871884,-61.196484,1.585)); +#449989 = CIRCLE('',#449990,7.499946135258E-02); +#449990 = AXIS2_PLACEMENT_3D('',#449991,#449992,#449993); +#449991 = CARTESIAN_POINT('',(140.80952413357,-61.23815132847,1.585)); +#449992 = DIRECTION('',(0.,0.,-1.)); +#449993 = DIRECTION('',(-0.55557910444,0.831463684541,0.)); +#449994 = ORIENTED_EDGE('',*,*,#449995,.T.); +#449995 = EDGE_CURVE('',#449987,#449996,#449998,.T.); +#449996 = VERTEX_POINT('',#449997); +#449997 = CARTESIAN_POINT('',(140.879389,-61.214604,1.585)); +#449998 = LINE('',#449999,#450000); +#449999 = CARTESIAN_POINT('',(140.871884,-61.196484,1.585)); +#450000 = VECTOR('',#450001,1.); +#450001 = DIRECTION('',(0.382659506909,-0.923889442397,0.)); +#450002 = ORIENTED_EDGE('',*,*,#450003,.T.); +#450003 = EDGE_CURVE('',#449996,#450004,#450006,.T.); +#450004 = VERTEX_POINT('',#450005); +#450005 = CARTESIAN_POINT('',(140.985368,-61.164593,1.585)); +#450006 = LINE('',#450007,#450008); +#450007 = CARTESIAN_POINT('',(140.879389,-61.214604,1.585)); +#450008 = VECTOR('',#450009,1.); +#450009 = DIRECTION('',(0.904362746847,0.426764598011,0.)); +#450010 = ORIENTED_EDGE('',*,*,#450011,.T.); +#450011 = EDGE_CURVE('',#450004,#450012,#450014,.T.); +#450012 = VERTEX_POINT('',#450013); +#450013 = CARTESIAN_POINT('',(141.10987,-61.164593,1.585)); +#450014 = LINE('',#450015,#450016); +#450015 = CARTESIAN_POINT('',(140.985368,-61.164593,1.585)); +#450016 = VECTOR('',#450017,1.); +#450017 = DIRECTION('',(1.,0.,0.)); +#450018 = ORIENTED_EDGE('',*,*,#450019,.T.); +#450019 = EDGE_CURVE('',#450012,#450020,#450022,.T.); +#450020 = VERTEX_POINT('',#450021); +#450021 = CARTESIAN_POINT('',(141.095238,-61.313152,1.585)); +#450022 = CIRCLE('',#450023,7.500006711464E-02); +#450023 = AXIS2_PLACEMENT_3D('',#450024,#450025,#450026); +#450024 = CARTESIAN_POINT('',(141.09523806711,-61.23815193288,1.585)); +#450025 = DIRECTION('',(0.,0.,-1.)); +#450026 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#450027 = ORIENTED_EDGE('',*,*,#450028,.T.); +#450028 = EDGE_CURVE('',#450020,#450029,#450031,.T.); +#450029 = VERTEX_POINT('',#450030); +#450030 = CARTESIAN_POINT('',(141.017705,-61.313152,1.585)); +#450031 = LINE('',#450032,#450033); +#450032 = CARTESIAN_POINT('',(141.095238,-61.313152,1.585)); +#450033 = VECTOR('',#450034,1.); +#450034 = DIRECTION('',(-1.,0.,0.)); +#450035 = ORIENTED_EDGE('',*,*,#450036,.T.); +#450036 = EDGE_CURVE('',#450029,#450037,#450039,.T.); +#450037 = VERTEX_POINT('',#450038); +#450038 = CARTESIAN_POINT('',(140.884524,-61.446333,1.585)); +#450039 = CIRCLE('',#450040,0.18686440374); +#450040 = AXIS2_PLACEMENT_3D('',#450041,#450042,#450043); +#450041 = CARTESIAN_POINT('',(141.065241,-61.493869,1.585)); +#450042 = DIRECTION('',(0.,0.,1.)); +#450043 = DIRECTION('',(-0.254387668537,0.967102328658,0.)); +#450044 = ORIENTED_EDGE('',*,*,#450045,.T.); +#450045 = EDGE_CURVE('',#450037,#450046,#450048,.T.); +#450046 = VERTEX_POINT('',#450047); +#450047 = CARTESIAN_POINT('',(140.883083,-61.919451,1.585)); +#450048 = LINE('',#450049,#450050); +#450049 = CARTESIAN_POINT('',(140.884524,-61.446333,1.585)); +#450050 = VECTOR('',#450051,1.); +#450051 = DIRECTION('',(-3.045737672744E-03,-0.99999536173,0.)); +#450052 = ORIENTED_EDGE('',*,*,#450053,.T.); +#450053 = EDGE_CURVE('',#450046,#450054,#450056,.T.); +#450054 = VERTEX_POINT('',#450055); +#450055 = CARTESIAN_POINT('',(140.734524,-61.904819,1.585)); +#450056 = CIRCLE('',#450057,7.500006711464E-02); +#450057 = AXIS2_PLACEMENT_3D('',#450058,#450059,#450060); +#450058 = CARTESIAN_POINT('',(140.80952406711,-61.90481906711,1.585)); +#450059 = DIRECTION('',(-0.,0.,-1.)); +#450060 = DIRECTION('',(0.980784894138,-0.195092263891,-0.)); +#450061 = ORIENTED_EDGE('',*,*,#450062,.T.); +#450062 = EDGE_CURVE('',#450054,#450063,#450065,.T.); +#450063 = VERTEX_POINT('',#450064); +#450064 = CARTESIAN_POINT('',(140.735965,-61.22352,1.585)); +#450065 = LINE('',#450066,#450067); +#450066 = CARTESIAN_POINT('',(140.734524,-61.904819,1.585)); +#450067 = VECTOR('',#450068,1.); +#450068 = DIRECTION('',(2.115072496535E-03,0.999997763232,0.)); +#450069 = ORIENTED_EDGE('',*,*,#450070,.T.); +#450070 = EDGE_CURVE('',#450063,#450071,#450073,.T.); +#450071 = VERTEX_POINT('',#450072); +#450072 = CARTESIAN_POINT('',(140.747164,-61.196484,1.585)); +#450073 = LINE('',#450074,#450075); +#450074 = CARTESIAN_POINT('',(140.735965,-61.22352,1.585)); +#450075 = VECTOR('',#450076,1.); +#450076 = DIRECTION('',(0.38269282806,0.923875640631,0.)); +#450077 = ORIENTED_EDGE('',*,*,#450078,.T.); +#450078 = EDGE_CURVE('',#450071,#449985,#450079,.T.); +#450079 = LINE('',#450080,#450081); +#450080 = CARTESIAN_POINT('',(140.747164,-61.196484,1.585)); +#450081 = VECTOR('',#450082,1.); +#450082 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#450083 = PLANE('',#450084); +#450084 = AXIS2_PLACEMENT_3D('',#450085,#450086,#450087); +#450085 = CARTESIAN_POINT('',(0.,0.,1.585)); +#450086 = DIRECTION('',(0.,0.,1.)); +#450087 = DIRECTION('',(1.,0.,-0.)); +#450088 = SHELL_BASED_SURFACE_MODEL('',(#450089)); +#450089 = OPEN_SHELL('',(#450090)); +#450090 = ADVANCED_FACE('',(#450091,#450263),#450314,.T.); +#450091 = FACE_BOUND('',#450092,.F.); +#450092 = EDGE_LOOP('',(#450093,#450104,#450112,#450120,#450128,#450136, + #450144,#450152,#450160,#450168,#450176,#450184,#450192,#450201, + #450209,#450217,#450225,#450233,#450241,#450249,#450257)); +#450093 = ORIENTED_EDGE('',*,*,#450094,.T.); +#450094 = EDGE_CURVE('',#450095,#450097,#450099,.T.); +#450095 = VERTEX_POINT('',#450096); +#450096 = CARTESIAN_POINT('',(141.395031,-61.218689,1.585)); +#450097 = VERTEX_POINT('',#450098); +#450098 = CARTESIAN_POINT('',(141.855508,-61.226521,1.585)); +#450099 = CIRCLE('',#450100,0.398777683503); +#450100 = AXIS2_PLACEMENT_3D('',#450101,#450102,#450103); +#450101 = CARTESIAN_POINT('',(141.61973278885,-61.54813208604,1.585)); +#450102 = DIRECTION('',(0.,0.,-1.)); +#450103 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#450104 = ORIENTED_EDGE('',*,*,#450105,.T.); +#450105 = EDGE_CURVE('',#450097,#450106,#450108,.T.); +#450106 = VERTEX_POINT('',#450107); +#450107 = CARTESIAN_POINT('',(141.876606,-61.25223,1.585)); +#450108 = LINE('',#450109,#450110); +#450109 = CARTESIAN_POINT('',(141.855508,-61.226521,1.585)); +#450110 = VECTOR('',#450111,1.); +#450111 = DIRECTION('',(0.634378352792,-0.773022706982,0.)); +#450112 = ORIENTED_EDGE('',*,*,#450113,.T.); +#450113 = EDGE_CURVE('',#450106,#450114,#450116,.T.); +#450114 = VERTEX_POINT('',#450115); +#450115 = CARTESIAN_POINT('',(141.930702,-61.366377,1.585)); +#450116 = LINE('',#450117,#450118); +#450117 = CARTESIAN_POINT('',(141.876606,-61.25223,1.585)); +#450118 = VECTOR('',#450119,1.); +#450119 = DIRECTION('',(0.428256830769,-0.903657062662,0.)); +#450120 = ORIENTED_EDGE('',*,*,#450121,.T.); +#450121 = EDGE_CURVE('',#450114,#450122,#450124,.T.); +#450122 = VERTEX_POINT('',#450123); +#450123 = CARTESIAN_POINT('',(141.930702,-61.490879,1.585)); +#450124 = LINE('',#450125,#450126); +#450125 = CARTESIAN_POINT('',(141.930702,-61.366377,1.585)); +#450126 = VECTOR('',#450127,1.); +#450127 = DIRECTION('',(0.,-1.,0.)); +#450128 = ORIENTED_EDGE('',*,*,#450129,.T.); +#450129 = EDGE_CURVE('',#450122,#450130,#450132,.T.); +#450130 = VERTEX_POINT('',#450131); +#450131 = CARTESIAN_POINT('',(141.910231,-61.529224,1.585)); +#450132 = LINE('',#450133,#450134); +#450133 = CARTESIAN_POINT('',(141.930702,-61.490879,1.585)); +#450134 = VECTOR('',#450135,1.); +#450135 = DIRECTION('',(-0.470952387878,-0.882158629925,0.)); +#450136 = ORIENTED_EDGE('',*,*,#450137,.T.); +#450137 = EDGE_CURVE('',#450130,#450138,#450140,.T.); +#450138 = VERTEX_POINT('',#450139); +#450139 = CARTESIAN_POINT('',(141.871851,-61.549791,1.585)); +#450140 = LINE('',#450141,#450142); +#450141 = CARTESIAN_POINT('',(141.910231,-61.529224,1.585)); +#450142 = VECTOR('',#450143,1.); +#450143 = DIRECTION('',(-0.881419874494,-0.472333573703,0.)); +#450144 = ORIENTED_EDGE('',*,*,#450145,.T.); +#450145 = EDGE_CURVE('',#450138,#450146,#450148,.T.); +#450146 = VERTEX_POINT('',#450147); +#450147 = CARTESIAN_POINT('',(141.455953,-61.63297,1.585)); +#450148 = LINE('',#450149,#450150); +#450149 = CARTESIAN_POINT('',(141.871851,-61.549791,1.585)); +#450150 = VECTOR('',#450151,1.); +#450151 = DIRECTION('',(-0.980580947737,-0.196114774901,0.)); +#450152 = ORIENTED_EDGE('',*,*,#450153,.T.); +#450153 = EDGE_CURVE('',#450146,#450154,#450156,.T.); +#450154 = VERTEX_POINT('',#450155); +#450155 = CARTESIAN_POINT('',(141.455953,-61.744256,1.585)); +#450156 = LINE('',#450157,#450158); +#450157 = CARTESIAN_POINT('',(141.455953,-61.63297,1.585)); +#450158 = VECTOR('',#450159,1.); +#450159 = DIRECTION('',(0.,-1.,0.)); +#450160 = ORIENTED_EDGE('',*,*,#450161,.T.); +#450161 = EDGE_CURVE('',#450154,#450162,#450164,.T.); +#450162 = VERTEX_POINT('',#450163); +#450163 = CARTESIAN_POINT('',(141.484473,-61.801298,1.585)); +#450164 = LINE('',#450165,#450166); +#450165 = CARTESIAN_POINT('',(141.455953,-61.744256,1.585)); +#450166 = VECTOR('',#450167,1.); +#450167 = DIRECTION('',(0.447201051247,-0.894433463016,0.)); +#450168 = ORIENTED_EDGE('',*,*,#450169,.T.); +#450169 = EDGE_CURVE('',#450162,#450170,#450172,.T.); +#450170 = VERTEX_POINT('',#450171); +#450171 = CARTESIAN_POINT('',(141.541515,-61.829819,1.585)); +#450172 = LINE('',#450173,#450174); +#450173 = CARTESIAN_POINT('',(141.484473,-61.801298,1.585)); +#450174 = VECTOR('',#450175,1.); +#450175 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#450176 = ORIENTED_EDGE('',*,*,#450177,.T.); +#450177 = EDGE_CURVE('',#450170,#450178,#450180,.T.); +#450178 = VERTEX_POINT('',#450179); +#450179 = CARTESIAN_POINT('',(141.696581,-61.829819,1.585)); +#450180 = LINE('',#450181,#450182); +#450181 = CARTESIAN_POINT('',(141.541515,-61.829819,1.585)); +#450182 = VECTOR('',#450183,1.); +#450183 = DIRECTION('',(1.,0.,0.)); +#450184 = ORIENTED_EDGE('',*,*,#450185,.T.); +#450185 = EDGE_CURVE('',#450178,#450186,#450188,.T.); +#450186 = VERTEX_POINT('',#450187); +#450187 = CARTESIAN_POINT('',(141.789714,-61.784863,1.585)); +#450188 = LINE('',#450189,#450190); +#450189 = CARTESIAN_POINT('',(141.696581,-61.829819,1.585)); +#450190 = VECTOR('',#450191,1.); +#450191 = DIRECTION('',(0.900569650916,0.434711748001,0.)); +#450192 = ORIENTED_EDGE('',*,*,#450193,.T.); +#450193 = EDGE_CURVE('',#450186,#450194,#450196,.T.); +#450194 = VERTEX_POINT('',#450195); +#450195 = CARTESIAN_POINT('',(141.843065,-61.924282,1.585)); +#450196 = CIRCLE('',#450197,7.500029440468E-02); +#450197 = AXIS2_PLACEMENT_3D('',#450198,#450199,#450200); +#450198 = CARTESIAN_POINT('',(141.80952335132,-61.85719994603,1.585)); +#450199 = DIRECTION('',(0.,0.,-1.)); +#450200 = DIRECTION('',(-0.264123647522,0.964488827732,-0.)); +#450201 = ORIENTED_EDGE('',*,*,#450202,.T.); +#450202 = EDGE_CURVE('',#450194,#450203,#450205,.T.); +#450203 = VERTEX_POINT('',#450204); +#450204 = CARTESIAN_POINT('',(141.728918,-61.978378,1.585)); +#450205 = LINE('',#450206,#450207); +#450206 = CARTESIAN_POINT('',(141.843065,-61.924282,1.585)); +#450207 = VECTOR('',#450208,1.); +#450208 = DIRECTION('',(-0.903657062662,-0.428256830769,0.)); +#450209 = ORIENTED_EDGE('',*,*,#450210,.T.); +#450210 = EDGE_CURVE('',#450203,#450211,#450213,.T.); +#450211 = VERTEX_POINT('',#450212); +#450212 = CARTESIAN_POINT('',(141.504,-61.977156,1.585)); +#450213 = LINE('',#450214,#450215); +#450214 = CARTESIAN_POINT('',(141.728918,-61.978378,1.585)); +#450215 = VECTOR('',#450216,1.); +#450216 = DIRECTION('',(-0.999985241087,5.433010984477E-03,0.)); +#450217 = ORIENTED_EDGE('',*,*,#450218,.T.); +#450218 = EDGE_CURVE('',#450211,#450219,#450221,.T.); +#450219 = VERTEX_POINT('',#450220); +#450220 = CARTESIAN_POINT('',(141.382588,-61.91645,1.585)); +#450221 = LINE('',#450222,#450223); +#450222 = CARTESIAN_POINT('',(141.504,-61.977156,1.585)); +#450223 = VECTOR('',#450224,1.); +#450224 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#450225 = ORIENTED_EDGE('',*,*,#450226,.T.); +#450226 = EDGE_CURVE('',#450219,#450227,#450229,.T.); +#450227 = VERTEX_POINT('',#450228); +#450228 = CARTESIAN_POINT('',(141.36149,-61.890741,1.585)); +#450229 = LINE('',#450230,#450231); +#450230 = CARTESIAN_POINT('',(141.382588,-61.91645,1.585)); +#450231 = VECTOR('',#450232,1.); +#450232 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#450233 = ORIENTED_EDGE('',*,*,#450234,.T.); +#450234 = EDGE_CURVE('',#450227,#450235,#450237,.T.); +#450235 = VERTEX_POINT('',#450236); +#450236 = CARTESIAN_POINT('',(141.307394,-61.776593,1.585)); +#450237 = LINE('',#450238,#450239); +#450238 = CARTESIAN_POINT('',(141.36149,-61.890741,1.585)); +#450239 = VECTOR('',#450240,1.); +#450240 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#450241 = ORIENTED_EDGE('',*,*,#450242,.T.); +#450242 = EDGE_CURVE('',#450235,#450243,#450245,.T.); +#450243 = VERTEX_POINT('',#450244); +#450244 = CARTESIAN_POINT('',(141.308616,-61.3612,1.585)); +#450245 = LINE('',#450246,#450247); +#450246 = CARTESIAN_POINT('',(141.307394,-61.776593,1.585)); +#450247 = VECTOR('',#450248,1.); +#450248 = DIRECTION('',(2.941779741993E-03,0.999995672957,0.)); +#450249 = ORIENTED_EDGE('',*,*,#450250,.T.); +#450250 = EDGE_CURVE('',#450243,#450251,#450253,.T.); +#450251 = VERTEX_POINT('',#450252); +#450252 = CARTESIAN_POINT('',(141.369322,-61.239787,1.585)); +#450253 = LINE('',#450254,#450255); +#450254 = CARTESIAN_POINT('',(141.308616,-61.3612,1.585)); +#450255 = VECTOR('',#450256,1.); +#450256 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#450257 = ORIENTED_EDGE('',*,*,#450258,.T.); +#450258 = EDGE_CURVE('',#450251,#450095,#450259,.T.); +#450259 = LINE('',#450260,#450261); +#450260 = CARTESIAN_POINT('',(141.369322,-61.239787,1.585)); +#450261 = VECTOR('',#450262,1.); +#450262 = DIRECTION('',(0.773022706982,0.634378352792,0.)); +#450263 = FACE_BOUND('',#450264,.F.); +#450264 = EDGE_LOOP('',(#450265,#450276,#450284,#450292,#450300,#450308) + ); +#450265 = ORIENTED_EDGE('',*,*,#450266,.T.); +#450266 = EDGE_CURVE('',#450267,#450269,#450271,.T.); +#450267 = VERTEX_POINT('',#450268); +#450268 = CARTESIAN_POINT('',(141.753622,-61.341672,1.585)); +#450269 = VERTEX_POINT('',#450270); +#450270 = CARTESIAN_POINT('',(141.484473,-61.341672,1.585)); +#450271 = CIRCLE('',#450272,0.239283669194); +#450272 = AXIS2_PLACEMENT_3D('',#450273,#450274,#450275); +#450273 = CARTESIAN_POINT('',(141.6190475,-61.53952643713,1.585)); +#450274 = DIRECTION('',(0.,0.,1.)); +#450275 = DIRECTION('',(0.562405702208,0.826861431029,-0.)); +#450276 = ORIENTED_EDGE('',*,*,#450277,.T.); +#450277 = EDGE_CURVE('',#450269,#450278,#450280,.T.); +#450278 = VERTEX_POINT('',#450279); +#450279 = CARTESIAN_POINT('',(141.455953,-61.398714,1.585)); +#450280 = LINE('',#450281,#450282); +#450281 = CARTESIAN_POINT('',(141.484473,-61.341672,1.585)); +#450282 = VECTOR('',#450283,1.); +#450283 = DIRECTION('',(-0.447201051247,-0.894433463016,0.)); +#450284 = ORIENTED_EDGE('',*,*,#450285,.T.); +#450285 = EDGE_CURVE('',#450278,#450286,#450288,.T.); +#450286 = VERTEX_POINT('',#450287); +#450287 = CARTESIAN_POINT('',(141.455953,-61.479999,1.585)); +#450288 = LINE('',#450289,#450290); +#450289 = CARTESIAN_POINT('',(141.455953,-61.398714,1.585)); +#450290 = VECTOR('',#450291,1.); +#450291 = DIRECTION('',(0.,-1.,0.)); +#450292 = ORIENTED_EDGE('',*,*,#450293,.T.); +#450293 = EDGE_CURVE('',#450286,#450294,#450296,.T.); +#450294 = VERTEX_POINT('',#450295); +#450295 = CARTESIAN_POINT('',(141.782143,-61.414762,1.585)); +#450296 = LINE('',#450297,#450298); +#450297 = CARTESIAN_POINT('',(141.455953,-61.479999,1.585)); +#450298 = VECTOR('',#450299,1.); +#450299 = DIRECTION('',(0.980581253795,0.196113244593,0.)); +#450300 = ORIENTED_EDGE('',*,*,#450301,.T.); +#450301 = EDGE_CURVE('',#450294,#450302,#450304,.T.); +#450302 = VERTEX_POINT('',#450303); +#450303 = CARTESIAN_POINT('',(141.782143,-61.398714,1.585)); +#450304 = LINE('',#450305,#450306); +#450305 = CARTESIAN_POINT('',(141.782143,-61.414762,1.585)); +#450306 = VECTOR('',#450307,1.); +#450307 = DIRECTION('',(0.,1.,0.)); +#450308 = ORIENTED_EDGE('',*,*,#450309,.T.); +#450309 = EDGE_CURVE('',#450302,#450267,#450310,.T.); +#450310 = LINE('',#450311,#450312); +#450311 = CARTESIAN_POINT('',(141.782143,-61.398714,1.585)); +#450312 = VECTOR('',#450313,1.); +#450313 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#450314 = PLANE('',#450315); +#450315 = AXIS2_PLACEMENT_3D('',#450316,#450317,#450318); +#450316 = CARTESIAN_POINT('',(0.,0.,1.585)); +#450317 = DIRECTION('',(0.,0.,1.)); +#450318 = DIRECTION('',(1.,0.,-0.)); +#450319 = SHELL_BASED_SURFACE_MODEL('',(#450320)); +#450320 = OPEN_SHELL('',(#450321)); +#450321 = ADVANCED_FACE('',(#450322,#450504),#450563,.T.); +#450322 = FACE_BOUND('',#450323,.F.); +#450323 = EDGE_LOOP('',(#450324,#450335,#450343,#450352,#450360,#450369, + #450377,#450385,#450393,#450401,#450409,#450417,#450425,#450433, + #450441,#450449,#450457,#450465,#450473,#450481,#450489,#450497)); +#450324 = ORIENTED_EDGE('',*,*,#450325,.T.); +#450325 = EDGE_CURVE('',#450326,#450328,#450330,.T.); +#450326 = VERTEX_POINT('',#450327); +#450327 = CARTESIAN_POINT('',(142.252174,-61.218689,1.585)); +#450328 = VERTEX_POINT('',#450329); +#450329 = CARTESIAN_POINT('',(142.712651,-61.226521,1.585)); +#450330 = CIRCLE('',#450331,0.398777683503); +#450331 = AXIS2_PLACEMENT_3D('',#450332,#450333,#450334); +#450332 = CARTESIAN_POINT('',(142.47687578885,-61.54813208604,1.585)); +#450333 = DIRECTION('',(0.,0.,-1.)); +#450334 = DIRECTION('',(-0.563476338197,0.826132202672,0.)); +#450335 = ORIENTED_EDGE('',*,*,#450336,.T.); +#450336 = EDGE_CURVE('',#450328,#450337,#450339,.T.); +#450337 = VERTEX_POINT('',#450338); +#450338 = CARTESIAN_POINT('',(142.733749,-61.25223,1.585)); +#450339 = LINE('',#450340,#450341); +#450340 = CARTESIAN_POINT('',(142.712651,-61.226521,1.585)); +#450341 = VECTOR('',#450342,1.); +#450342 = DIRECTION('',(0.634378352791,-0.773022706982,0.)); +#450343 = ORIENTED_EDGE('',*,*,#450344,.T.); +#450344 = EDGE_CURVE('',#450337,#450345,#450347,.T.); +#450345 = VERTEX_POINT('',#450346); +#450346 = CARTESIAN_POINT('',(142.776646,-61.946487,1.585)); +#450347 = CIRCLE('',#450348,0.780466291444); +#450348 = AXIS2_PLACEMENT_3D('',#450349,#450350,#450351); +#450349 = CARTESIAN_POINT('',(142.0578362213,-61.64244730828,1.585)); +#450350 = DIRECTION('',(0.,0.,-1.)); +#450351 = DIRECTION('',(0.86603711922,0.499979707722,0.)); +#450352 = ORIENTED_EDGE('',*,*,#450353,.T.); +#450353 = EDGE_CURVE('',#450345,#450354,#450356,.T.); +#450354 = VERTEX_POINT('',#450355); +#450355 = CARTESIAN_POINT('',(142.755954,-61.967179,1.585)); +#450356 = LINE('',#450357,#450358); +#450357 = CARTESIAN_POINT('',(142.776646,-61.946487,1.585)); +#450358 = VECTOR('',#450359,1.); +#450359 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#450360 = ORIENTED_EDGE('',*,*,#450361,.T.); +#450361 = EDGE_CURVE('',#450354,#450362,#450364,.T.); +#450362 = VERTEX_POINT('',#450363); +#450363 = CARTESIAN_POINT('',(142.669089,-61.96365,1.585)); +#450364 = CIRCLE('',#450365,7.337228534664E-02); +#450365 = AXIS2_PLACEMENT_3D('',#450366,#450367,#450368); +#450366 = CARTESIAN_POINT('',(142.71492094045,-61.90635318079,1.585)); +#450367 = DIRECTION('',(-0.,0.,-1.)); +#450368 = DIRECTION('',(0.55924467048,-0.829002652915,-0.)); +#450369 = ORIENTED_EDGE('',*,*,#450370,.T.); +#450370 = EDGE_CURVE('',#450362,#450371,#450373,.T.); +#450371 = VERTEX_POINT('',#450372); +#450372 = CARTESIAN_POINT('',(142.63368,-61.978378,1.585)); +#450373 = LINE('',#450374,#450375); +#450374 = CARTESIAN_POINT('',(142.669089,-61.96365,1.585)); +#450375 = VECTOR('',#450376,1.); +#450376 = DIRECTION('',(-0.923315130307,-0.384043187866,0.)); +#450377 = ORIENTED_EDGE('',*,*,#450378,.T.); +#450378 = EDGE_CURVE('',#450371,#450379,#450381,.T.); +#450379 = VERTEX_POINT('',#450380); +#450380 = CARTESIAN_POINT('',(142.361143,-61.977156,1.585)); +#450381 = LINE('',#450382,#450383); +#450382 = CARTESIAN_POINT('',(142.63368,-61.978378,1.585)); +#450383 = VECTOR('',#450384,1.); +#450384 = DIRECTION('',(-0.999989947943,4.483749789516E-03,0.)); +#450385 = ORIENTED_EDGE('',*,*,#450386,.T.); +#450386 = EDGE_CURVE('',#450379,#450387,#450389,.T.); +#450387 = VERTEX_POINT('',#450388); +#450388 = CARTESIAN_POINT('',(142.239731,-61.91645,1.585)); +#450389 = LINE('',#450390,#450391); +#450390 = CARTESIAN_POINT('',(142.361143,-61.977156,1.585)); +#450391 = VECTOR('',#450392,1.); +#450392 = DIRECTION('',(-0.894427191,0.4472135955,0.)); +#450393 = ORIENTED_EDGE('',*,*,#450394,.T.); +#450394 = EDGE_CURVE('',#450387,#450395,#450397,.T.); +#450395 = VERTEX_POINT('',#450396); +#450396 = CARTESIAN_POINT('',(142.218633,-61.890741,1.585)); +#450397 = LINE('',#450398,#450399); +#450398 = CARTESIAN_POINT('',(142.239731,-61.91645,1.585)); +#450399 = VECTOR('',#450400,1.); +#450400 = DIRECTION('',(-0.634378352791,0.773022706982,0.)); +#450401 = ORIENTED_EDGE('',*,*,#450402,.T.); +#450402 = EDGE_CURVE('',#450395,#450403,#450405,.T.); +#450403 = VERTEX_POINT('',#450404); +#450404 = CARTESIAN_POINT('',(142.164537,-61.776593,1.585)); +#450405 = LINE('',#450406,#450407); +#450406 = CARTESIAN_POINT('',(142.218633,-61.890741,1.585)); +#450407 = VECTOR('',#450408,1.); +#450408 = DIRECTION('',(-0.428253767083,0.903658514584,0.)); +#450409 = ORIENTED_EDGE('',*,*,#450410,.T.); +#450410 = EDGE_CURVE('',#450403,#450411,#450413,.T.); +#450411 = VERTEX_POINT('',#450412); +#450412 = CARTESIAN_POINT('',(142.165759,-61.646914,1.585)); +#450413 = LINE('',#450414,#450415); +#450414 = CARTESIAN_POINT('',(142.164537,-61.776593,1.585)); +#450415 = VECTOR('',#450416,1.); +#450416 = DIRECTION('',(9.422849868194E-03,0.999955603965,0.)); +#450417 = ORIENTED_EDGE('',*,*,#450418,.T.); +#450418 = EDGE_CURVE('',#450411,#450419,#450421,.T.); +#450419 = VERTEX_POINT('',#450420); +#450420 = CARTESIAN_POINT('',(142.226465,-61.525501,1.585)); +#450421 = LINE('',#450422,#450423); +#450422 = CARTESIAN_POINT('',(142.165759,-61.646914,1.585)); +#450423 = VECTOR('',#450424,1.); +#450424 = DIRECTION('',(0.447210648766,0.894428664361,0.)); +#450425 = ORIENTED_EDGE('',*,*,#450426,.T.); +#450426 = EDGE_CURVE('',#450419,#450427,#450429,.T.); +#450427 = VERTEX_POINT('',#450428); +#450428 = CARTESIAN_POINT('',(142.252174,-61.504403,1.585)); +#450429 = LINE('',#450430,#450431); +#450430 = CARTESIAN_POINT('',(142.226465,-61.525501,1.585)); +#450431 = VECTOR('',#450432,1.); +#450432 = DIRECTION('',(0.773022706982,0.634378352791,0.)); +#450433 = ORIENTED_EDGE('',*,*,#450434,.T.); +#450434 = EDGE_CURVE('',#450427,#450435,#450437,.T.); +#450435 = VERTEX_POINT('',#450436); +#450436 = CARTESIAN_POINT('',(142.366321,-61.450307,1.585)); +#450437 = LINE('',#450438,#450439); +#450438 = CARTESIAN_POINT('',(142.252174,-61.504403,1.585)); +#450439 = VECTOR('',#450440,1.); +#450440 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#450441 = ORIENTED_EDGE('',*,*,#450442,.T.); +#450442 = EDGE_CURVE('',#450435,#450443,#450445,.T.); +#450443 = VERTEX_POINT('',#450444); +#450444 = CARTESIAN_POINT('',(142.601343,-61.448866,1.585)); +#450445 = LINE('',#450446,#450447); +#450446 = CARTESIAN_POINT('',(142.366321,-61.450307,1.585)); +#450447 = VECTOR('',#450448,1.); +#450448 = DIRECTION('',(0.999981203859,6.131225650199E-03,0.)); +#450449 = ORIENTED_EDGE('',*,*,#450450,.T.); +#450450 = EDGE_CURVE('',#450443,#450451,#450453,.T.); +#450451 = VERTEX_POINT('',#450452); +#450452 = CARTESIAN_POINT('',(142.639286,-61.429894,1.585)); +#450453 = LINE('',#450454,#450455); +#450454 = CARTESIAN_POINT('',(142.601343,-61.448866,1.585)); +#450455 = VECTOR('',#450456,1.); +#450456 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#450457 = ORIENTED_EDGE('',*,*,#450458,.T.); +#450458 = EDGE_CURVE('',#450451,#450459,#450461,.T.); +#450459 = VERTEX_POINT('',#450460); +#450460 = CARTESIAN_POINT('',(142.639286,-61.398714,1.585)); +#450461 = LINE('',#450462,#450463); +#450462 = CARTESIAN_POINT('',(142.639286,-61.429894,1.585)); +#450463 = VECTOR('',#450464,1.); +#450464 = DIRECTION('',(0.,1.,0.)); +#450465 = ORIENTED_EDGE('',*,*,#450466,.T.); +#450466 = EDGE_CURVE('',#450459,#450467,#450469,.T.); +#450467 = VERTEX_POINT('',#450468); +#450468 = CARTESIAN_POINT('',(142.610765,-61.341672,1.585)); +#450469 = LINE('',#450470,#450471); +#450470 = CARTESIAN_POINT('',(142.639286,-61.398714,1.585)); +#450471 = VECTOR('',#450472,1.); +#450472 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#450473 = ORIENTED_EDGE('',*,*,#450474,.T.); +#450474 = EDGE_CURVE('',#450467,#450475,#450477,.T.); +#450475 = VERTEX_POINT('',#450476); +#450476 = CARTESIAN_POINT('',(142.553724,-61.313152,1.585)); +#450477 = LINE('',#450478,#450479); +#450478 = CARTESIAN_POINT('',(142.610765,-61.341672,1.585)); +#450479 = VECTOR('',#450480,1.); +#450480 = DIRECTION('',(-0.894430327074,0.447207323297,0.)); +#450481 = ORIENTED_EDGE('',*,*,#450482,.T.); +#450482 = EDGE_CURVE('',#450475,#450483,#450485,.T.); +#450483 = VERTEX_POINT('',#450484); +#450484 = CARTESIAN_POINT('',(142.398658,-61.313152,1.585)); +#450485 = LINE('',#450486,#450487); +#450486 = CARTESIAN_POINT('',(142.553724,-61.313152,1.585)); +#450487 = VECTOR('',#450488,1.); +#450488 = DIRECTION('',(-1.,0.,0.)); +#450489 = ORIENTED_EDGE('',*,*,#450490,.T.); +#450490 = EDGE_CURVE('',#450483,#450491,#450493,.T.); +#450491 = VERTEX_POINT('',#450492); +#450492 = CARTESIAN_POINT('',(142.305524,-61.358108,1.585)); +#450493 = LINE('',#450494,#450495); +#450494 = CARTESIAN_POINT('',(142.398658,-61.313152,1.585)); +#450495 = VECTOR('',#450496,1.); +#450496 = DIRECTION('',(-0.90057147822,-0.43470796245,0.)); +#450497 = ORIENTED_EDGE('',*,*,#450498,.T.); +#450498 = EDGE_CURVE('',#450491,#450326,#450499,.T.); +#450499 = CIRCLE('',#450500,7.500005272361E-02); +#450500 = AXIS2_PLACEMENT_3D('',#450501,#450502,#450503); +#450501 = CARTESIAN_POINT('',(142.28571455676,-61.28577132972,1.585)); +#450502 = DIRECTION('',(0.,0.,-1.)); +#450503 = DIRECTION('',(0.264125724196,-0.964488259036,0.)); +#450504 = FACE_BOUND('',#450505,.F.); +#450505 = EDGE_LOOP('',(#450506,#450516,#450524,#450532,#450540,#450549, + #450557)); +#450506 = ORIENTED_EDGE('',*,*,#450507,.T.); +#450507 = EDGE_CURVE('',#450508,#450510,#450512,.T.); +#450508 = VERTEX_POINT('',#450509); +#450509 = CARTESIAN_POINT('',(142.601343,-61.829819,1.585)); +#450510 = VERTEX_POINT('',#450511); +#450511 = CARTESIAN_POINT('',(142.639286,-61.810847,1.585)); +#450512 = LINE('',#450513,#450514); +#450513 = CARTESIAN_POINT('',(142.601343,-61.829819,1.585)); +#450514 = VECTOR('',#450515,1.); +#450515 = DIRECTION('',(0.894422476392,0.447223024592,0.)); +#450516 = ORIENTED_EDGE('',*,*,#450517,.T.); +#450517 = EDGE_CURVE('',#450510,#450518,#450520,.T.); +#450518 = VERTEX_POINT('',#450519); +#450519 = CARTESIAN_POINT('',(142.638857,-61.596203,1.585)); +#450520 = LINE('',#450521,#450522); +#450521 = CARTESIAN_POINT('',(142.639286,-61.810847,1.585)); +#450522 = VECTOR('',#450523,1.); +#450523 = DIRECTION('',(-1.99865425146E-03,0.999998002689,0.)); +#450524 = ORIENTED_EDGE('',*,*,#450525,.T.); +#450525 = EDGE_CURVE('',#450518,#450526,#450528,.T.); +#450526 = VERTEX_POINT('',#450527); +#450527 = CARTESIAN_POINT('',(142.398658,-61.598866,1.585)); +#450528 = LINE('',#450529,#450530); +#450529 = CARTESIAN_POINT('',(142.638857,-61.596203,1.585)); +#450530 = VECTOR('',#450531,1.); +#450531 = DIRECTION('',(-0.999938548864,-1.108595937379E-02,0.)); +#450532 = ORIENTED_EDGE('',*,*,#450533,.T.); +#450533 = EDGE_CURVE('',#450526,#450534,#450536,.T.); +#450534 = VERTEX_POINT('',#450535); +#450535 = CARTESIAN_POINT('',(142.341616,-61.627386,1.585)); +#450536 = LINE('',#450537,#450538); +#450537 = CARTESIAN_POINT('',(142.398658,-61.598866,1.585)); +#450538 = VECTOR('',#450539,1.); +#450539 = DIRECTION('',(-0.894433463017,-0.447201051247,0.)); +#450540 = ORIENTED_EDGE('',*,*,#450541,.T.); +#450541 = EDGE_CURVE('',#450534,#450542,#450544,.T.); +#450542 = VERTEX_POINT('',#450543); +#450543 = CARTESIAN_POINT('',(142.341616,-61.801298,1.585)); +#450544 = CIRCLE('',#450545,0.13450278439); +#450545 = AXIS2_PLACEMENT_3D('',#450546,#450547,#450548); +#450546 = CARTESIAN_POINT('',(142.44423009782,-61.714342,1.585)); +#450547 = DIRECTION('',(0.,0.,1.)); +#450548 = DIRECTION('',(-0.762914301674,0.646499627456,0.)); +#450549 = ORIENTED_EDGE('',*,*,#450550,.T.); +#450550 = EDGE_CURVE('',#450542,#450551,#450553,.T.); +#450551 = VERTEX_POINT('',#450552); +#450552 = CARTESIAN_POINT('',(142.398658,-61.829819,1.585)); +#450553 = LINE('',#450554,#450555); +#450554 = CARTESIAN_POINT('',(142.341616,-61.801298,1.585)); +#450555 = VECTOR('',#450556,1.); +#450556 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#450557 = ORIENTED_EDGE('',*,*,#450558,.T.); +#450558 = EDGE_CURVE('',#450551,#450508,#450559,.T.); +#450559 = LINE('',#450560,#450561); +#450560 = CARTESIAN_POINT('',(142.398658,-61.829819,1.585)); +#450561 = VECTOR('',#450562,1.); +#450562 = DIRECTION('',(1.,0.,0.)); +#450563 = PLANE('',#450564); +#450564 = AXIS2_PLACEMENT_3D('',#450565,#450566,#450567); +#450565 = CARTESIAN_POINT('',(0.,0.,1.585)); +#450566 = DIRECTION('',(0.,0.,1.)); +#450567 = DIRECTION('',(1.,0.,-0.)); +#450568 = SHELL_BASED_SURFACE_MODEL('',(#450569)); +#450569 = OPEN_SHELL('',(#450570)); +#450570 = ADVANCED_FACE('',(#450571),#450607,.T.); +#450571 = FACE_BOUND('',#450572,.F.); +#450572 = EDGE_LOOP('',(#450573,#450584,#450592,#450601)); +#450573 = ORIENTED_EDGE('',*,*,#450574,.T.); +#450574 = EDGE_CURVE('',#450575,#450577,#450579,.T.); +#450575 = VERTEX_POINT('',#450576); +#450576 = CARTESIAN_POINT('',(122.65,-60.51,1.585)); +#450577 = VERTEX_POINT('',#450578); +#450578 = CARTESIAN_POINT('',(122.65,-60.39,1.585)); +#450579 = CIRCLE('',#450580,6.000000000042E-02); +#450580 = AXIS2_PLACEMENT_3D('',#450581,#450582,#450583); +#450581 = CARTESIAN_POINT('',(122.64999977441,-60.45,1.585)); +#450582 = DIRECTION('',(0.,0.,-1.)); +#450583 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#450584 = ORIENTED_EDGE('',*,*,#450585,.T.); +#450585 = EDGE_CURVE('',#450577,#450586,#450588,.T.); +#450586 = VERTEX_POINT('',#450587); +#450587 = CARTESIAN_POINT('',(124.65,-60.39,1.585)); +#450588 = LINE('',#450589,#450590); +#450589 = CARTESIAN_POINT('',(122.65,-60.39,1.585)); +#450590 = VECTOR('',#450591,1.); +#450591 = DIRECTION('',(1.,0.,0.)); +#450592 = ORIENTED_EDGE('',*,*,#450593,.T.); +#450593 = EDGE_CURVE('',#450586,#450594,#450596,.T.); +#450594 = VERTEX_POINT('',#450595); +#450595 = CARTESIAN_POINT('',(124.65,-60.51,1.585)); +#450596 = CIRCLE('',#450597,6.000000000042E-02); +#450597 = AXIS2_PLACEMENT_3D('',#450598,#450599,#450600); +#450598 = CARTESIAN_POINT('',(124.65000022558,-60.45,1.585)); +#450599 = DIRECTION('',(0.,0.,-1.)); +#450600 = DIRECTION('',(-3.759794016837E-06,0.999999999993,-0.)); +#450601 = ORIENTED_EDGE('',*,*,#450602,.T.); +#450602 = EDGE_CURVE('',#450594,#450575,#450603,.T.); +#450603 = LINE('',#450604,#450605); +#450604 = CARTESIAN_POINT('',(124.65,-60.51,1.585)); +#450605 = VECTOR('',#450606,1.); +#450606 = DIRECTION('',(-1.,0.,0.)); +#450607 = PLANE('',#450608); +#450608 = AXIS2_PLACEMENT_3D('',#450609,#450610,#450611); +#450609 = CARTESIAN_POINT('',(0.,0.,1.585)); +#450610 = DIRECTION('',(0.,0.,1.)); +#450611 = DIRECTION('',(1.,0.,-0.)); +#450612 = SHELL_BASED_SURFACE_MODEL('',(#450613)); +#450613 = OPEN_SHELL('',(#450614)); +#450614 = ADVANCED_FACE('',(#450615),#450651,.T.); +#450615 = FACE_BOUND('',#450616,.F.); +#450616 = EDGE_LOOP('',(#450617,#450628,#450636,#450645)); +#450617 = ORIENTED_EDGE('',*,*,#450618,.T.); +#450618 = EDGE_CURVE('',#450619,#450621,#450623,.T.); +#450619 = VERTEX_POINT('',#450620); +#450620 = CARTESIAN_POINT('',(150.35,-60.51,1.585)); +#450621 = VERTEX_POINT('',#450622); +#450622 = CARTESIAN_POINT('',(150.35,-60.39,1.585)); +#450623 = CIRCLE('',#450624,6.000000000042E-02); +#450624 = AXIS2_PLACEMENT_3D('',#450625,#450626,#450627); +#450625 = CARTESIAN_POINT('',(150.34999977441,-60.45,1.585)); +#450626 = DIRECTION('',(0.,0.,-1.)); +#450627 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#450628 = ORIENTED_EDGE('',*,*,#450629,.T.); +#450629 = EDGE_CURVE('',#450621,#450630,#450632,.T.); +#450630 = VERTEX_POINT('',#450631); +#450631 = CARTESIAN_POINT('',(152.35,-60.39,1.585)); +#450632 = LINE('',#450633,#450634); +#450633 = CARTESIAN_POINT('',(150.35,-60.39,1.585)); +#450634 = VECTOR('',#450635,1.); +#450635 = DIRECTION('',(1.,0.,0.)); +#450636 = ORIENTED_EDGE('',*,*,#450637,.T.); +#450637 = EDGE_CURVE('',#450630,#450638,#450640,.T.); +#450638 = VERTEX_POINT('',#450639); +#450639 = CARTESIAN_POINT('',(152.35,-60.51,1.585)); +#450640 = CIRCLE('',#450641,6.000000000043E-02); +#450641 = AXIS2_PLACEMENT_3D('',#450642,#450643,#450644); +#450642 = CARTESIAN_POINT('',(152.35000022558,-60.45,1.585)); +#450643 = DIRECTION('',(0.,0.,-1.)); +#450644 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#450645 = ORIENTED_EDGE('',*,*,#450646,.T.); +#450646 = EDGE_CURVE('',#450638,#450619,#450647,.T.); +#450647 = LINE('',#450648,#450649); +#450648 = CARTESIAN_POINT('',(152.35,-60.51,1.585)); +#450649 = VECTOR('',#450650,1.); +#450650 = DIRECTION('',(-1.,0.,0.)); +#450651 = PLANE('',#450652); +#450652 = AXIS2_PLACEMENT_3D('',#450653,#450654,#450655); +#450653 = CARTESIAN_POINT('',(0.,0.,1.585)); +#450654 = DIRECTION('',(0.,0.,1.)); +#450655 = DIRECTION('',(1.,0.,-0.)); +#450656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#450660)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#450657,#450658,#450659)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#450657 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#450658 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#450659 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#450660 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#450657, + 'distance_accuracy_value','confusion accuracy'); +#450661 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#450662,#450664); +#450662 = ( REPRESENTATION_RELATIONSHIP('','',#429965,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#450663) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#450663 = ITEM_DEFINED_TRANSFORMATION('','',#11,#367); +#450664 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #450665); +#450665 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('115','=>[0:1:1:54]','',#5, + #429960,$); +#450666 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#429962)); +#450667 = SHAPE_DEFINITION_REPRESENTATION(#450668,#450674); +#450668 = PRODUCT_DEFINITION_SHAPE('','',#450669); +#450669 = PRODUCT_DEFINITION('design','',#450670,#450673); +#450670 = PRODUCT_DEFINITION_FORMATION('','',#450671); +#450671 = PRODUCT('snips_controller-unsaved-export-kiHHnP_silkscreen', + 'snips_controller-unsaved-export-kiHHnP_silkscreen','',(#450672)); +#450672 = PRODUCT_CONTEXT('',#2,'mechanical'); +#450673 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#450674 = SHAPE_REPRESENTATION('',(#11,#450675,#451137,#451895,#451989, + #452357,#453567,#453853,#453955,#454112,#454351,#454631,#456025, + #456109,#456193,#456425,#456587,#456689,#456851,#457025,#457160, + #457317,#457419,#457581,#457820,#457948,#457998,#458048,#458098, + #458148,#460186,#460236,#460286,#460336,#460560,#460610,#460660, + #460736,#460967,#461017,#461248,#461298,#461348,#461634,#461700, + #461857,#462050,#462100,#462318,#463998,#464163,#464381,#464431, + #464522,#464566,#464664,#464821,#464974,#465040,#465090,#465140, + #465190,#465240,#465646,#465964,#466203,#466253,#466303,#466385, + #466429,#466586,#466636,#466686,#466768,#466942,#467056,#467213, + #467726,#467776,#467826,#468200,#468266,#468546,#468596,#468646, + #468696,#468904,#468954,#469100,#469150,#469592,#469642,#469874, + #469924,#469974,#470107,#470157,#470233,#470283,#470359,#470409, + #470571,#470764,#470808,#470918,#471053,#471097,#471147,#471197, + #471364,#471466,#471543,#471620,#471859,#471965,#472017,#472069, + #472195,#472239,#472470,#472538,#472623,#472780,#472824,#472989, + #473033,#473319,#473413,#473566,#473668,#473770,#474009,#474248, + #474300,#474368,#474452,#474609,#474693,#474867,#474961,#475123, + #475167,#475211,#475313,#475487,#475719,#475763,#475807,#475859, + #475911,#476068,#476112,#476214,#476258,#476420,#476522,#476684, + #476728,#476903,#476947,#476999,#477067,#477312,#477370,#477414, + #477458,#477564,#477658,#477710,#477762,#477806,#477999,#478043, + #478087,#478373,#478538,#478582,#478775,#478827,#478879,#478981, + #479000,#479157,#479248,#479292,#479336,#479388,#479440,#479614, + #479666,#479734,#479891,#479935,#480026,#480070,#480164,#480482, + #480778,#480822,#480874,#480926,#480970,#481022,#481074,#481118, + #481170,#481222,#481299,#481376,#481444,#481496,#481548,#481665, + #481767,#481836,#481905,#481949,#481993,#482037,#482626,#482738, + #482782,#482826,#482903,#482980,#483260,#483312,#483364,#483416, + #483468,#483536,#483605,#483674,#483726,#483778,#483880,#483932, + #484000),#484094); +#450675 = SHELL_BASED_SURFACE_MODEL('',(#450676)); +#450676 = OPEN_SHELL('',(#450677)); +#450677 = ADVANCED_FACE('',(#450678),#451132,.T.); +#450678 = FACE_BOUND('',#450679,.T.); +#450679 = EDGE_LOOP('',(#450680,#450690,#450698,#450706,#450714,#450722, + #450730,#450738,#450746,#450755,#450763,#450771,#450779,#450787, + #450795,#450803,#450811,#450819,#450827,#450836,#450844,#450852, + #450860,#450868,#450877,#450885,#450893,#450901,#450910,#450918, + #450926,#450934,#450942,#450950,#450958,#450966,#450974,#450982, + #450990,#450998,#451006,#451014,#451022,#451030,#451038,#451046, + #451054,#451062,#451070,#451078,#451086,#451094,#451102,#451110, + #451118,#451126)); +#450680 = ORIENTED_EDGE('',*,*,#450681,.T.); +#450681 = EDGE_CURVE('',#450682,#450684,#450686,.T.); +#450682 = VERTEX_POINT('',#450683); +#450683 = CARTESIAN_POINT('',(146.376473,-155.431582,-7.5E-02)); +#450684 = VERTEX_POINT('',#450685); +#450685 = CARTESIAN_POINT('',(146.401637,-155.418084,-7.5E-02)); +#450686 = LINE('',#450687,#450688); +#450687 = CARTESIAN_POINT('',(146.376473,-155.431582,-7.5E-02)); +#450688 = VECTOR('',#450689,1.); +#450689 = DIRECTION('',(0.881227871544,0.472691694886,0.)); +#450690 = ORIENTED_EDGE('',*,*,#450691,.T.); +#450691 = EDGE_CURVE('',#450684,#450692,#450694,.T.); +#450692 = VERTEX_POINT('',#450693); +#450693 = CARTESIAN_POINT('',(146.477469,-155.415132,-7.5E-02)); +#450694 = LINE('',#450695,#450696); +#450695 = CARTESIAN_POINT('',(146.401637,-155.418084,-7.5E-02)); +#450696 = VECTOR('',#450697,1.); +#450697 = DIRECTION('',(0.999243159377,3.889869456789E-02,0.)); +#450698 = ORIENTED_EDGE('',*,*,#450699,.T.); +#450699 = EDGE_CURVE('',#450692,#450700,#450702,.T.); +#450700 = VERTEX_POINT('',#450701); +#450701 = CARTESIAN_POINT('',(146.559219,-155.450093,-7.5E-02)); +#450702 = LINE('',#450703,#450704); +#450703 = CARTESIAN_POINT('',(146.477469,-155.415132,-7.5E-02)); +#450704 = VECTOR('',#450705,1.); +#450705 = DIRECTION('',(0.919449008833,-0.393209257466,0.)); +#450706 = ORIENTED_EDGE('',*,*,#450707,.T.); +#450707 = EDGE_CURVE('',#450700,#450708,#450710,.T.); +#450708 = VERTEX_POINT('',#450709); +#450709 = CARTESIAN_POINT('',(146.635642,-155.518261,-7.5E-02)); +#450710 = LINE('',#450711,#450712); +#450711 = CARTESIAN_POINT('',(146.559219,-155.450093,-7.5E-02)); +#450712 = VECTOR('',#450713,1.); +#450713 = DIRECTION('',(0.746261741087,-0.665652622462,0.)); +#450714 = ORIENTED_EDGE('',*,*,#450715,.T.); +#450715 = EDGE_CURVE('',#450708,#450716,#450718,.T.); +#450716 = VERTEX_POINT('',#450717); +#450717 = CARTESIAN_POINT('',(146.67759,-155.579019,-7.5E-02)); +#450718 = LINE('',#450719,#450720); +#450719 = CARTESIAN_POINT('',(146.635642,-155.518261,-7.5E-02)); +#450720 = VECTOR('',#450721,1.); +#450721 = DIRECTION('',(0.568154466798,-0.822921929382,0.)); +#450722 = ORIENTED_EDGE('',*,*,#450723,.T.); +#450723 = EDGE_CURVE('',#450716,#450724,#450726,.T.); +#450724 = VERTEX_POINT('',#450725); +#450725 = CARTESIAN_POINT('',(146.687145,-155.616284,-7.5E-02)); +#450726 = LINE('',#450727,#450728); +#450727 = CARTESIAN_POINT('',(146.67759,-155.579019,-7.5E-02)); +#450728 = VECTOR('',#450729,1.); +#450729 = DIRECTION('',(0.248372223294,-0.968664667827,0.)); +#450730 = ORIENTED_EDGE('',*,*,#450731,.T.); +#450731 = EDGE_CURVE('',#450724,#450732,#450734,.T.); +#450732 = VERTEX_POINT('',#450733); +#450733 = CARTESIAN_POINT('',(146.688601,-155.751617,-7.5E-02)); +#450734 = LINE('',#450735,#450736); +#450735 = CARTESIAN_POINT('',(146.687145,-155.616284,-7.5E-02)); +#450736 = VECTOR('',#450737,1.); +#450737 = DIRECTION('',(1.075802459439E-02,-0.999942130779,0.)); +#450738 = ORIENTED_EDGE('',*,*,#450739,.T.); +#450739 = EDGE_CURVE('',#450732,#450740,#450742,.T.); +#450740 = VERTEX_POINT('',#450741); +#450741 = CARTESIAN_POINT('',(146.671792,-156.02529,-7.5E-02)); +#450742 = LINE('',#450743,#450744); +#450743 = CARTESIAN_POINT('',(146.688601,-155.751617,-7.5E-02)); +#450744 = VECTOR('',#450745,1.); +#450745 = DIRECTION('',(-6.130449161272E-02,-0.998119110782,0.)); +#450746 = ORIENTED_EDGE('',*,*,#450747,.T.); +#450747 = EDGE_CURVE('',#450740,#450748,#450750,.T.); +#450748 = VERTEX_POINT('',#450749); +#450749 = CARTESIAN_POINT('',(146.28674,-157.205869,-7.5E-02)); +#450750 = CIRCLE('',#450751,2.800164066554); +#450751 = AXIS2_PLACEMENT_3D('',#450752,#450753,#450754); +#450752 = CARTESIAN_POINT('',(143.88338860346,-155.7689205442,-7.5E-02) + ); +#450753 = DIRECTION('',(0.,0.,-1.)); +#450754 = DIRECTION('',(0.995800006806,-9.155515520894E-02,0.)); +#450755 = ORIENTED_EDGE('',*,*,#450756,.T.); +#450756 = EDGE_CURVE('',#450748,#450757,#450759,.T.); +#450757 = VERTEX_POINT('',#450758); +#450758 = CARTESIAN_POINT('',(146.221221,-157.302241,-7.5E-02)); +#450759 = LINE('',#450760,#450761); +#450760 = CARTESIAN_POINT('',(146.28674,-157.205869,-7.5E-02)); +#450761 = VECTOR('',#450762,1.); +#450762 = DIRECTION('',(-0.562228103442,-0.826982200353,0.)); +#450763 = ORIENTED_EDGE('',*,*,#450764,.T.); +#450764 = EDGE_CURVE('',#450757,#450765,#450767,.T.); +#450765 = VERTEX_POINT('',#450766); +#450766 = CARTESIAN_POINT('',(146.144072,-157.397932,-7.5E-02)); +#450767 = LINE('',#450768,#450769); +#450768 = CARTESIAN_POINT('',(146.221221,-157.302241,-7.5E-02)); +#450769 = VECTOR('',#450770,1.); +#450770 = DIRECTION('',(-0.627648130187,-0.778497157781,0.)); +#450771 = ORIENTED_EDGE('',*,*,#450772,.T.); +#450772 = EDGE_CURVE('',#450765,#450773,#450775,.T.); +#450773 = VERTEX_POINT('',#450774); +#450774 = CARTESIAN_POINT('',(146.049155,-157.50034,-7.5E-02)); +#450775 = LINE('',#450776,#450777); +#450776 = CARTESIAN_POINT('',(146.144072,-157.397932,-7.5E-02)); +#450777 = VECTOR('',#450778,1.); +#450778 = DIRECTION('',(-0.679773403613,-0.733422197469,0.)); +#450779 = ORIENTED_EDGE('',*,*,#450780,.T.); +#450780 = EDGE_CURVE('',#450773,#450781,#450783,.T.); +#450781 = VERTEX_POINT('',#450782); +#450782 = CARTESIAN_POINT('',(145.586259,-157.939334,-7.5E-02)); +#450783 = LINE('',#450784,#450785); +#450784 = CARTESIAN_POINT('',(146.049155,-157.50034,-7.5E-02)); +#450785 = VECTOR('',#450786,1.); +#450786 = DIRECTION('',(-0.725591842763,-0.68812533576,0.)); +#450787 = ORIENTED_EDGE('',*,*,#450788,.T.); +#450788 = EDGE_CURVE('',#450781,#450789,#450791,.T.); +#450789 = VERTEX_POINT('',#450790); +#450790 = CARTESIAN_POINT('',(145.452846,-158.07785,-7.5E-02)); +#450791 = LINE('',#450792,#450793); +#450792 = CARTESIAN_POINT('',(145.586259,-157.939334,-7.5E-02)); +#450793 = VECTOR('',#450794,1.); +#450794 = DIRECTION('',(-0.693715127709,-0.720249485656,0.)); +#450795 = ORIENTED_EDGE('',*,*,#450796,.T.); +#450796 = EDGE_CURVE('',#450789,#450797,#450799,.T.); +#450797 = VERTEX_POINT('',#450798); +#450798 = CARTESIAN_POINT('',(145.352309,-158.197634,-7.5E-02)); +#450799 = LINE('',#450800,#450801); +#450800 = CARTESIAN_POINT('',(145.452846,-158.07785,-7.5E-02)); +#450801 = VECTOR('',#450802,1.); +#450802 = DIRECTION('',(-0.642886255719,-0.765961658445,0.)); +#450803 = ORIENTED_EDGE('',*,*,#450804,.T.); +#450804 = EDGE_CURVE('',#450797,#450805,#450807,.T.); +#450805 = VERTEX_POINT('',#450806); +#450806 = CARTESIAN_POINT('',(145.281953,-158.301863,-7.5E-02)); +#450807 = LINE('',#450808,#450809); +#450808 = CARTESIAN_POINT('',(145.352309,-158.197634,-7.5E-02)); +#450809 = VECTOR('',#450810,1.); +#450810 = DIRECTION('',(-0.559480639809,-0.828843419277,0.)); +#450811 = ORIENTED_EDGE('',*,*,#450812,.T.); +#450812 = EDGE_CURVE('',#450805,#450813,#450815,.T.); +#450813 = VERTEX_POINT('',#450814); +#450814 = CARTESIAN_POINT('',(145.23908,-158.393712,-7.5E-02)); +#450815 = LINE('',#450816,#450817); +#450816 = CARTESIAN_POINT('',(145.281953,-158.301863,-7.5E-02)); +#450817 = VECTOR('',#450818,1.); +#450818 = DIRECTION('',(-0.422967556849,-0.906144826092,0.)); +#450819 = ORIENTED_EDGE('',*,*,#450820,.T.); +#450820 = EDGE_CURVE('',#450813,#450821,#450823,.T.); +#450821 = VERTEX_POINT('',#450822); +#450822 = CARTESIAN_POINT('',(145.211523,-158.473288,-7.5E-02)); +#450823 = LINE('',#450824,#450825); +#450824 = CARTESIAN_POINT('',(145.23908,-158.393712,-7.5E-02)); +#450825 = VECTOR('',#450826,1.); +#450826 = DIRECTION('',(-0.327232100748,-0.944943994235,0.)); +#450827 = ORIENTED_EDGE('',*,*,#450828,.T.); +#450828 = EDGE_CURVE('',#450821,#450829,#450831,.T.); +#450829 = VERTEX_POINT('',#450830); +#450830 = CARTESIAN_POINT('',(145.807276,-158.598353,-7.5E-02)); +#450831 = CIRCLE('',#450832,2.250826509009); +#450832 = AXIS2_PLACEMENT_3D('',#450833,#450834,#450835); +#450833 = CARTESIAN_POINT('',(145.96758289469,-156.353242385,-7.5E-02)); +#450834 = DIRECTION('',(0.,0.,1.)); +#450835 = DIRECTION('',(-0.335903230067,-0.941896501761,0.)); +#450836 = ORIENTED_EDGE('',*,*,#450837,.T.); +#450837 = EDGE_CURVE('',#450829,#450838,#450840,.T.); +#450838 = VERTEX_POINT('',#450839); +#450839 = CARTESIAN_POINT('',(145.983385,-158.60287,-7.5E-02)); +#450840 = LINE('',#450841,#450842); +#450841 = CARTESIAN_POINT('',(145.807276,-158.598353,-7.5E-02)); +#450842 = VECTOR('',#450843,1.); +#450843 = DIRECTION('',(0.999671229481,-2.564045530642E-02,0.)); +#450844 = ORIENTED_EDGE('',*,*,#450845,.T.); +#450845 = EDGE_CURVE('',#450838,#450846,#450848,.T.); +#450846 = VERTEX_POINT('',#450847); +#450847 = CARTESIAN_POINT('',(146.140091,-158.590945,-7.5E-02)); +#450848 = LINE('',#450849,#450850); +#450849 = CARTESIAN_POINT('',(145.983385,-158.60287,-7.5E-02)); +#450850 = VECTOR('',#450851,1.); +#450851 = DIRECTION('',(0.997117068637,7.587853077411E-02,0.)); +#450852 = ORIENTED_EDGE('',*,*,#450853,.T.); +#450853 = EDGE_CURVE('',#450846,#450854,#450856,.T.); +#450854 = VERTEX_POINT('',#450855); +#450855 = CARTESIAN_POINT('',(146.265675,-158.562011,-7.5E-02)); +#450856 = LINE('',#450857,#450858); +#450857 = CARTESIAN_POINT('',(146.140091,-158.590945,-7.5E-02)); +#450858 = VECTOR('',#450859,1.); +#450859 = DIRECTION('',(0.97447090916,0.224513801803,0.)); +#450860 = ORIENTED_EDGE('',*,*,#450861,.T.); +#450861 = EDGE_CURVE('',#450854,#450862,#450864,.T.); +#450862 = VERTEX_POINT('',#450863); +#450863 = CARTESIAN_POINT('',(146.33635,-158.552312,-7.5E-02)); +#450864 = LINE('',#450865,#450866); +#450865 = CARTESIAN_POINT('',(146.265675,-158.562011,-7.5E-02)); +#450866 = VECTOR('',#450867,1.); +#450867 = DIRECTION('',(0.99071439355,0.135959517553,0.)); +#450868 = ORIENTED_EDGE('',*,*,#450869,.T.); +#450869 = EDGE_CURVE('',#450862,#450870,#450872,.T.); +#450870 = VERTEX_POINT('',#450871); +#450871 = CARTESIAN_POINT('',(146.553783,-158.686648,-7.5E-02)); +#450872 = CIRCLE('',#450873,0.276841704624); +#450873 = AXIS2_PLACEMENT_3D('',#450874,#450875,#450876); +#450874 = CARTESIAN_POINT('',(146.31598768791,-158.8284038428,-7.5E-02) + ); +#450875 = DIRECTION('',(0.,0.,-1.)); +#450876 = DIRECTION('',(7.355218430847E-02,0.997291369753,0.)); +#450877 = ORIENTED_EDGE('',*,*,#450878,.T.); +#450878 = EDGE_CURVE('',#450870,#450879,#450881,.T.); +#450879 = VERTEX_POINT('',#450880); +#450880 = CARTESIAN_POINT('',(146.574496,-158.77377,-7.5E-02)); +#450881 = LINE('',#450882,#450883); +#450882 = CARTESIAN_POINT('',(146.553783,-158.686648,-7.5E-02)); +#450883 = VECTOR('',#450884,1.); +#450884 = DIRECTION('',(0.231299957662,-0.972882484982,0.)); +#450885 = ORIENTED_EDGE('',*,*,#450886,.T.); +#450886 = EDGE_CURVE('',#450879,#450887,#450889,.T.); +#450887 = VERTEX_POINT('',#450888); +#450888 = CARTESIAN_POINT('',(146.556824,-158.823831,-7.5E-02)); +#450889 = LINE('',#450890,#450891); +#450890 = CARTESIAN_POINT('',(146.574496,-158.77377,-7.5E-02)); +#450891 = VECTOR('',#450892,1.); +#450892 = DIRECTION('',(-0.332877263933,-0.942970162389,0.)); +#450893 = ORIENTED_EDGE('',*,*,#450894,.T.); +#450894 = EDGE_CURVE('',#450887,#450895,#450897,.T.); +#450895 = VERTEX_POINT('',#450896); +#450896 = CARTESIAN_POINT('',(146.50728,-158.865751,-7.5E-02)); +#450897 = LINE('',#450898,#450899); +#450898 = CARTESIAN_POINT('',(146.556824,-158.823831,-7.5E-02)); +#450899 = VECTOR('',#450900,1.); +#450900 = DIRECTION('',(-0.763400312267,-0.645925663858,0.)); +#450901 = ORIENTED_EDGE('',*,*,#450902,.T.); +#450902 = EDGE_CURVE('',#450895,#450903,#450905,.T.); +#450903 = VERTEX_POINT('',#450904); +#450904 = CARTESIAN_POINT('',(146.287449,-158.929001,-7.5E-02)); +#450905 = CIRCLE('',#450906,0.456647110856); +#450906 = AXIS2_PLACEMENT_3D('',#450907,#450908,#450909); +#450907 = CARTESIAN_POINT('',(146.27512456402,-158.4725202313,-7.5E-02) + ); +#450908 = DIRECTION('',(0.,0.,-1.)); +#450909 = DIRECTION('',(0.508391338649,-0.861126150333,0.)); +#450910 = ORIENTED_EDGE('',*,*,#450911,.T.); +#450911 = EDGE_CURVE('',#450903,#450912,#450914,.T.); +#450912 = VERTEX_POINT('',#450913); +#450913 = CARTESIAN_POINT('',(146.042298,-158.926979,-7.5E-02)); +#450914 = LINE('',#450915,#450916); +#450915 = CARTESIAN_POINT('',(146.287449,-158.929001,-7.5E-02)); +#450916 = VECTOR('',#450917,1.); +#450917 = DIRECTION('',(-0.999965987167,8.247697239912E-03,0.)); +#450918 = ORIENTED_EDGE('',*,*,#450919,.T.); +#450919 = EDGE_CURVE('',#450912,#450920,#450922,.T.); +#450920 = VERTEX_POINT('',#450921); +#450921 = CARTESIAN_POINT('',(145.94327,-158.921608,-7.5E-02)); +#450922 = LINE('',#450923,#450924); +#450923 = CARTESIAN_POINT('',(146.042298,-158.926979,-7.5E-02)); +#450924 = VECTOR('',#450925,1.); +#450925 = DIRECTION('',(-0.998532400962,5.415758700128E-02,0.)); +#450926 = ORIENTED_EDGE('',*,*,#450927,.T.); +#450927 = EDGE_CURVE('',#450920,#450928,#450930,.T.); +#450928 = VERTEX_POINT('',#450929); +#450929 = CARTESIAN_POINT('',(145.688808,-158.893922,-7.5E-02)); +#450930 = LINE('',#450931,#450932); +#450931 = CARTESIAN_POINT('',(145.94327,-158.921608,-7.5E-02)); +#450932 = VECTOR('',#450933,1.); +#450933 = DIRECTION('',(-0.994133089335,0.108163767915,0.)); +#450934 = ORIENTED_EDGE('',*,*,#450935,.T.); +#450935 = EDGE_CURVE('',#450928,#450936,#450938,.T.); +#450936 = VERTEX_POINT('',#450937); +#450937 = CARTESIAN_POINT('',(145.464475,-158.848349,-7.5E-02)); +#450938 = LINE('',#450939,#450940); +#450939 = CARTESIAN_POINT('',(145.688808,-158.893922,-7.5E-02)); +#450940 = VECTOR('',#450941,1.); +#450941 = DIRECTION('',(-0.979982752191,0.199082408587,0.)); +#450942 = ORIENTED_EDGE('',*,*,#450943,.T.); +#450943 = EDGE_CURVE('',#450936,#450944,#450946,.T.); +#450944 = VERTEX_POINT('',#450945); +#450945 = CARTESIAN_POINT('',(145.272449,-158.786118,-7.5E-02)); +#450946 = LINE('',#450947,#450948); +#450947 = CARTESIAN_POINT('',(145.464475,-158.848349,-7.5E-02)); +#450948 = VECTOR('',#450949,1.); +#450949 = DIRECTION('',(-0.951292144027,0.308290863815,0.)); +#450950 = ORIENTED_EDGE('',*,*,#450951,.T.); +#450951 = EDGE_CURVE('',#450944,#450952,#450954,.T.); +#450952 = VERTEX_POINT('',#450953); +#450953 = CARTESIAN_POINT('',(145.114905,-158.708454,-7.5E-02)); +#450954 = LINE('',#450955,#450956); +#450955 = CARTESIAN_POINT('',(145.272449,-158.786118,-7.5E-02)); +#450956 = VECTOR('',#450957,1.); +#450957 = DIRECTION('',(-0.89693619945,0.442159987014,0.)); +#450958 = ORIENTED_EDGE('',*,*,#450959,.T.); +#450959 = EDGE_CURVE('',#450952,#450960,#450962,.T.); +#450960 = VERTEX_POINT('',#450961); +#450961 = CARTESIAN_POINT('',(144.99402,-158.616585,-7.5E-02)); +#450962 = LINE('',#450963,#450964); +#450963 = CARTESIAN_POINT('',(145.114905,-158.708454,-7.5E-02)); +#450964 = VECTOR('',#450965,1.); +#450965 = DIRECTION('',(-0.796173616308,0.605068238049,0.)); +#450966 = ORIENTED_EDGE('',*,*,#450967,.T.); +#450967 = EDGE_CURVE('',#450960,#450968,#450970,.T.); +#450968 = VERTEX_POINT('',#450969); +#450969 = CARTESIAN_POINT('',(144.911971,-158.511736,-7.5E-02)); +#450970 = LINE('',#450971,#450972); +#450971 = CARTESIAN_POINT('',(144.99402,-158.616585,-7.5E-02)); +#450972 = VECTOR('',#450973,1.); +#450973 = DIRECTION('',(-0.616276869596,0.7875295677,0.)); +#450974 = ORIENTED_EDGE('',*,*,#450975,.T.); +#450975 = EDGE_CURVE('',#450968,#450976,#450978,.T.); +#450976 = VERTEX_POINT('',#450977); +#450977 = CARTESIAN_POINT('',(144.870934,-158.395135,-7.5E-02)); +#450978 = LINE('',#450979,#450980); +#450979 = CARTESIAN_POINT('',(144.911971,-158.511736,-7.5E-02)); +#450980 = VECTOR('',#450981,1.); +#450981 = DIRECTION('',(-0.331983396143,0.943285229761,0.)); +#450982 = ORIENTED_EDGE('',*,*,#450983,.T.); +#450983 = EDGE_CURVE('',#450976,#450984,#450986,.T.); +#450984 = VERTEX_POINT('',#450985); +#450985 = CARTESIAN_POINT('',(144.875083,-158.257738,-7.5E-02)); +#450986 = LINE('',#450987,#450988); +#450987 = CARTESIAN_POINT('',(144.870934,-158.395135,-7.5E-02)); +#450988 = VECTOR('',#450989,1.); +#450989 = DIRECTION('',(3.018340735851E-02,0.999544377164,0.)); +#450990 = ORIENTED_EDGE('',*,*,#450991,.T.); +#450991 = EDGE_CURVE('',#450984,#450992,#450994,.T.); +#450992 = VERTEX_POINT('',#450993); +#450993 = CARTESIAN_POINT('',(144.901645,-158.166227,-7.5E-02)); +#450994 = LINE('',#450995,#450996); +#450995 = CARTESIAN_POINT('',(144.875083,-158.257738,-7.5E-02)); +#450996 = VECTOR('',#450997,1.); +#450997 = DIRECTION('',(0.278754932093,0.96036226906,0.)); +#450998 = ORIENTED_EDGE('',*,*,#450999,.T.); +#450999 = EDGE_CURVE('',#450992,#451000,#451002,.T.); +#451000 = VERTEX_POINT('',#451001); +#451001 = CARTESIAN_POINT('',(144.946258,-158.07168,-7.5E-02)); +#451002 = LINE('',#451003,#451004); +#451003 = CARTESIAN_POINT('',(144.901645,-158.166227,-7.5E-02)); +#451004 = VECTOR('',#451005,1.); +#451005 = DIRECTION('',(0.426738843239,0.904374899956,0.)); +#451006 = ORIENTED_EDGE('',*,*,#451007,.T.); +#451007 = EDGE_CURVE('',#451000,#451008,#451010,.T.); +#451008 = VERTEX_POINT('',#451009); +#451009 = CARTESIAN_POINT('',(145.012139,-157.970043,-7.5E-02)); +#451010 = LINE('',#451011,#451012); +#451011 = CARTESIAN_POINT('',(144.946258,-158.07168,-7.5E-02)); +#451012 = VECTOR('',#451013,1.); +#451013 = DIRECTION('',(0.543925491967,0.839133516902,0.)); +#451014 = ORIENTED_EDGE('',*,*,#451015,.T.); +#451015 = EDGE_CURVE('',#451008,#451016,#451018,.T.); +#451016 = VERTEX_POINT('',#451017); +#451017 = CARTESIAN_POINT('',(145.102507,-157.857261,-7.5E-02)); +#451018 = LINE('',#451019,#451020); +#451019 = CARTESIAN_POINT('',(145.012139,-157.970043,-7.5E-02)); +#451020 = VECTOR('',#451021,1.); +#451021 = DIRECTION('',(0.625295672288,0.780387930595,0.)); +#451022 = ORIENTED_EDGE('',*,*,#451023,.T.); +#451023 = EDGE_CURVE('',#451016,#451024,#451026,.T.); +#451024 = VERTEX_POINT('',#451025); +#451025 = CARTESIAN_POINT('',(145.220579,-157.729278,-7.5E-02)); +#451026 = LINE('',#451027,#451028); +#451027 = CARTESIAN_POINT('',(145.102507,-157.857261,-7.5E-02)); +#451028 = VECTOR('',#451029,1.); +#451029 = DIRECTION('',(0.678074946745,0.734992766357,0.)); +#451030 = ORIENTED_EDGE('',*,*,#451031,.T.); +#451031 = EDGE_CURVE('',#451024,#451032,#451034,.T.); +#451032 = VERTEX_POINT('',#451033); +#451033 = CARTESIAN_POINT('',(145.369572,-157.582039,-7.5E-02)); +#451034 = LINE('',#451035,#451036); +#451035 = CARTESIAN_POINT('',(145.220579,-157.729278,-7.5E-02)); +#451036 = VECTOR('',#451037,1.); +#451037 = DIRECTION('',(0.711281116921,0.702907655892,0.)); +#451038 = ORIENTED_EDGE('',*,*,#451039,.T.); +#451039 = EDGE_CURVE('',#451032,#451040,#451042,.T.); +#451040 = VERTEX_POINT('',#451041); +#451041 = CARTESIAN_POINT('',(145.733344,-157.238159,-7.5E-02)); +#451042 = LINE('',#451043,#451044); +#451043 = CARTESIAN_POINT('',(145.369572,-157.582039,-7.5E-02)); +#451044 = VECTOR('',#451045,1.); +#451045 = DIRECTION('',(0.726696407061,0.68695875565,0.)); +#451046 = ORIENTED_EDGE('',*,*,#451047,.T.); +#451047 = EDGE_CURVE('',#451040,#451048,#451050,.T.); +#451048 = VERTEX_POINT('',#451049); +#451049 = CARTESIAN_POINT('',(145.855583,-157.102052,-7.5E-02)); +#451050 = LINE('',#451051,#451052); +#451051 = CARTESIAN_POINT('',(145.733344,-157.238159,-7.5E-02)); +#451052 = VECTOR('',#451053,1.); +#451053 = DIRECTION('',(0.668187314844,0.743993086179,0.)); +#451054 = ORIENTED_EDGE('',*,*,#451055,.T.); +#451055 = EDGE_CURVE('',#451048,#451056,#451058,.T.); +#451056 = VERTEX_POINT('',#451057); +#451057 = CARTESIAN_POINT('',(145.954073,-156.967066,-7.5E-02)); +#451058 = LINE('',#451059,#451060); +#451059 = CARTESIAN_POINT('',(145.855583,-157.102052,-7.5E-02)); +#451060 = VECTOR('',#451061,1.); +#451061 = DIRECTION('',(0.589417141993,0.807828838756,0.)); +#451062 = ORIENTED_EDGE('',*,*,#451063,.T.); +#451063 = EDGE_CURVE('',#451056,#451064,#451066,.T.); +#451064 = VERTEX_POINT('',#451065); +#451065 = CARTESIAN_POINT('',(146.035981,-156.822306,-7.5E-02)); +#451066 = LINE('',#451067,#451068); +#451067 = CARTESIAN_POINT('',(145.954073,-156.967066,-7.5E-02)); +#451068 = VECTOR('',#451069,1.); +#451069 = DIRECTION('',(0.492454223022,0.870338346982,0.)); +#451070 = ORIENTED_EDGE('',*,*,#451071,.T.); +#451071 = EDGE_CURVE('',#451064,#451072,#451074,.T.); +#451072 = VERTEX_POINT('',#451073); +#451073 = CARTESIAN_POINT('',(146.108473,-156.656879,-7.5E-02)); +#451074 = LINE('',#451075,#451076); +#451075 = CARTESIAN_POINT('',(146.035981,-156.822306,-7.5E-02)); +#451076 = VECTOR('',#451077,1.); +#451077 = DIRECTION('',(0.401365678581,0.915917895915,0.)); +#451078 = ORIENTED_EDGE('',*,*,#451079,.T.); +#451079 = EDGE_CURVE('',#451072,#451080,#451082,.T.); +#451080 = VERTEX_POINT('',#451081); +#451081 = CARTESIAN_POINT('',(146.178718,-156.45989,-7.5E-02)); +#451082 = LINE('',#451083,#451084); +#451083 = CARTESIAN_POINT('',(146.108473,-156.656879,-7.5E-02)); +#451084 = VECTOR('',#451085,1.); +#451085 = DIRECTION('',(0.335877461524,0.941905691054,0.)); +#451086 = ORIENTED_EDGE('',*,*,#451087,.T.); +#451087 = EDGE_CURVE('',#451080,#451088,#451090,.T.); +#451088 = VERTEX_POINT('',#451089); +#451089 = CARTESIAN_POINT('',(146.243719,-156.247424,-7.5E-02)); +#451090 = LINE('',#451091,#451092); +#451091 = CARTESIAN_POINT('',(146.178718,-156.45989,-7.5E-02)); +#451092 = VECTOR('',#451093,1.); +#451093 = DIRECTION('',(0.292551259875,0.956249842011,0.)); +#451094 = ORIENTED_EDGE('',*,*,#451095,.T.); +#451095 = EDGE_CURVE('',#451088,#451096,#451098,.T.); +#451096 = VERTEX_POINT('',#451097); +#451097 = CARTESIAN_POINT('',(146.289296,-156.05765,-7.5E-02)); +#451098 = LINE('',#451099,#451100); +#451099 = CARTESIAN_POINT('',(146.243719,-156.247424,-7.5E-02)); +#451100 = VECTOR('',#451101,1.); +#451101 = DIRECTION('',(0.233524297382,0.972350966746,0.)); +#451102 = ORIENTED_EDGE('',*,*,#451103,.T.); +#451103 = EDGE_CURVE('',#451096,#451104,#451106,.T.); +#451104 = VERTEX_POINT('',#451105); +#451105 = CARTESIAN_POINT('',(146.318942,-155.873143,-7.5E-02)); +#451106 = LINE('',#451107,#451108); +#451107 = CARTESIAN_POINT('',(146.289296,-156.05765,-7.5E-02)); +#451108 = VECTOR('',#451109,1.); +#451109 = DIRECTION('',(0.158642045705,0.9873361643,0.)); +#451110 = ORIENTED_EDGE('',*,*,#451111,.T.); +#451111 = EDGE_CURVE('',#451104,#451112,#451114,.T.); +#451112 = VERTEX_POINT('',#451113); +#451113 = CARTESIAN_POINT('',(146.350796,-155.499146,-7.5E-02)); +#451114 = LINE('',#451115,#451116); +#451115 = CARTESIAN_POINT('',(146.318942,-155.873143,-7.5E-02)); +#451116 = VECTOR('',#451117,1.); +#451117 = DIRECTION('',(8.48645486576E-02,0.996392497152,0.)); +#451118 = ORIENTED_EDGE('',*,*,#451119,.T.); +#451119 = EDGE_CURVE('',#451112,#451120,#451122,.T.); +#451120 = VERTEX_POINT('',#451121); +#451121 = CARTESIAN_POINT('',(146.361221,-155.455303,-7.5E-02)); +#451122 = LINE('',#451123,#451124); +#451123 = CARTESIAN_POINT('',(146.350796,-155.499146,-7.5E-02)); +#451124 = VECTOR('',#451125,1.); +#451125 = DIRECTION('',(0.231330523522,0.972875217532,0.)); +#451126 = ORIENTED_EDGE('',*,*,#451127,.T.); +#451127 = EDGE_CURVE('',#451120,#450682,#451128,.T.); +#451128 = LINE('',#451129,#451130); +#451129 = CARTESIAN_POINT('',(146.361221,-155.455303,-7.5E-02)); +#451130 = VECTOR('',#451131,1.); +#451131 = DIRECTION('',(0.540827484241,0.841133540105,0.)); +#451132 = PLANE('',#451133); +#451133 = AXIS2_PLACEMENT_3D('',#451134,#451135,#451136); +#451134 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#451135 = DIRECTION('',(-0.,-0.,-1.)); +#451136 = DIRECTION('',(-1.,0.,0.)); +#451137 = SHELL_BASED_SURFACE_MODEL('',(#451138)); +#451138 = OPEN_SHELL('',(#451139)); +#451139 = ADVANCED_FACE('',(#451140),#451890,.T.); +#451140 = FACE_BOUND('',#451141,.T.); +#451141 = EDGE_LOOP('',(#451142,#451152,#451160,#451168,#451176,#451184, + #451192,#451200,#451208,#451216,#451224,#451232,#451240,#451248, + #451256,#451264,#451272,#451280,#451288,#451296,#451304,#451312, + #451320,#451328,#451336,#451345,#451353,#451361,#451369,#451378, + #451386,#451394,#451402,#451410,#451418,#451426,#451434,#451443, + #451451,#451459,#451467,#451475,#451483,#451491,#451499,#451507, + #451515,#451523,#451531,#451539,#451547,#451555,#451563,#451571, + #451579,#451587,#451595,#451603,#451611,#451619,#451627,#451635, + #451643,#451651,#451659,#451667,#451675,#451683,#451691,#451699, + #451707,#451715,#451723,#451731,#451740,#451748,#451756,#451764, + #451772,#451780,#451788,#451796,#451804,#451812,#451820,#451828, + #451836,#451844,#451852,#451860,#451868,#451876,#451884)); +#451142 = ORIENTED_EDGE('',*,*,#451143,.T.); +#451143 = EDGE_CURVE('',#451144,#451146,#451148,.T.); +#451144 = VERTEX_POINT('',#451145); +#451145 = CARTESIAN_POINT('',(148.734248,-156.137431,-7.5E-02)); +#451146 = VERTEX_POINT('',#451147); +#451147 = CARTESIAN_POINT('',(148.873439,-156.095119,-7.5E-02)); +#451148 = LINE('',#451149,#451150); +#451149 = CARTESIAN_POINT('',(148.734248,-156.137431,-7.5E-02)); +#451150 = VECTOR('',#451151,1.); +#451151 = DIRECTION('',(0.956770477093,0.290844037522,0.)); +#451152 = ORIENTED_EDGE('',*,*,#451153,.T.); +#451153 = EDGE_CURVE('',#451146,#451154,#451156,.T.); +#451154 = VERTEX_POINT('',#451155); +#451155 = CARTESIAN_POINT('',(148.975361,-156.074636,-7.5E-02)); +#451156 = LINE('',#451157,#451158); +#451157 = CARTESIAN_POINT('',(148.873439,-156.095119,-7.5E-02)); +#451158 = VECTOR('',#451159,1.); +#451159 = DIRECTION('',(0.980397858691,0.197028014948,0.)); +#451160 = ORIENTED_EDGE('',*,*,#451161,.T.); +#451161 = EDGE_CURVE('',#451154,#451162,#451164,.T.); +#451162 = VERTEX_POINT('',#451163); +#451163 = CARTESIAN_POINT('',(149.040655,-156.075755,-7.5E-02)); +#451164 = LINE('',#451165,#451166); +#451165 = CARTESIAN_POINT('',(148.975361,-156.074636,-7.5E-02)); +#451166 = VECTOR('',#451167,1.); +#451167 = DIRECTION('',(0.999853179069,-1.713535251886E-02,0.)); +#451168 = ORIENTED_EDGE('',*,*,#451169,.T.); +#451169 = EDGE_CURVE('',#451162,#451170,#451172,.T.); +#451170 = VERTEX_POINT('',#451171); +#451171 = CARTESIAN_POINT('',(149.106515,-156.105587,-7.5E-02)); +#451172 = LINE('',#451173,#451174); +#451173 = CARTESIAN_POINT('',(149.040655,-156.075755,-7.5E-02)); +#451174 = VECTOR('',#451175,1.); +#451175 = DIRECTION('',(0.910909458051,-0.412606300525,0.)); +#451176 = ORIENTED_EDGE('',*,*,#451177,.T.); +#451177 = EDGE_CURVE('',#451170,#451178,#451180,.T.); +#451178 = VERTEX_POINT('',#451179); +#451179 = CARTESIAN_POINT('',(149.170097,-156.162318,-7.5E-02)); +#451180 = LINE('',#451181,#451182); +#451181 = CARTESIAN_POINT('',(149.106515,-156.105587,-7.5E-02)); +#451182 = VECTOR('',#451183,1.); +#451183 = DIRECTION('',(0.746162916125,-0.665763398363,0.)); +#451184 = ORIENTED_EDGE('',*,*,#451185,.T.); +#451185 = EDGE_CURVE('',#451178,#451186,#451188,.T.); +#451186 = VERTEX_POINT('',#451187); +#451187 = CARTESIAN_POINT('',(149.215452,-156.232198,-7.5E-02)); +#451188 = LINE('',#451189,#451190); +#451189 = CARTESIAN_POINT('',(149.170097,-156.162318,-7.5E-02)); +#451190 = VECTOR('',#451191,1.); +#451191 = DIRECTION('',(0.544422855463,-0.838810916983,0.)); +#451192 = ORIENTED_EDGE('',*,*,#451193,.T.); +#451193 = EDGE_CURVE('',#451186,#451194,#451196,.T.); +#451194 = VERTEX_POINT('',#451195); +#451195 = CARTESIAN_POINT('',(149.235144,-156.303384,-7.5E-02)); +#451196 = LINE('',#451197,#451198); +#451197 = CARTESIAN_POINT('',(149.215452,-156.232198,-7.5E-02)); +#451198 = VECTOR('',#451199,1.); +#451199 = DIRECTION('',(0.266614419612,-0.963803274146,0.)); +#451200 = ORIENTED_EDGE('',*,*,#451201,.T.); +#451201 = EDGE_CURVE('',#451194,#451202,#451204,.T.); +#451202 = VERTEX_POINT('',#451203); +#451203 = CARTESIAN_POINT('',(149.221731,-156.364033,-7.5E-02)); +#451204 = LINE('',#451205,#451206); +#451205 = CARTESIAN_POINT('',(149.235144,-156.303384,-7.5E-02)); +#451206 = VECTOR('',#451207,1.); +#451207 = DIRECTION('',(-0.215939954917,-0.976406644729,0.)); +#451208 = ORIENTED_EDGE('',*,*,#451209,.T.); +#451209 = EDGE_CURVE('',#451202,#451210,#451212,.T.); +#451210 = VERTEX_POINT('',#451211); +#451211 = CARTESIAN_POINT('',(149.208634,-156.377005,-7.5E-02)); +#451212 = LINE('',#451213,#451214); +#451213 = CARTESIAN_POINT('',(149.221731,-156.364033,-7.5E-02)); +#451214 = VECTOR('',#451215,1.); +#451215 = DIRECTION('',(-0.710489167378,-0.703708137681,0.)); +#451216 = ORIENTED_EDGE('',*,*,#451217,.T.); +#451217 = EDGE_CURVE('',#451210,#451218,#451220,.T.); +#451218 = VERTEX_POINT('',#451219); +#451219 = CARTESIAN_POINT('',(149.157631,-156.404718,-7.5E-02)); +#451220 = LINE('',#451221,#451222); +#451221 = CARTESIAN_POINT('',(149.208634,-156.377005,-7.5E-02)); +#451222 = VECTOR('',#451223,1.); +#451223 = DIRECTION('',(-0.878668031029,-0.47743323224,0.)); +#451224 = ORIENTED_EDGE('',*,*,#451225,.T.); +#451225 = EDGE_CURVE('',#451218,#451226,#451228,.T.); +#451226 = VERTEX_POINT('',#451227); +#451227 = CARTESIAN_POINT('',(149.007158,-156.451612,-7.5E-02)); +#451228 = LINE('',#451229,#451230); +#451229 = CARTESIAN_POINT('',(149.157631,-156.404718,-7.5E-02)); +#451230 = VECTOR('',#451231,1.); +#451231 = DIRECTION('',(-0.954712365796,-0.29753033223,0.)); +#451232 = ORIENTED_EDGE('',*,*,#451233,.T.); +#451233 = EDGE_CURVE('',#451226,#451234,#451236,.T.); +#451234 = VERTEX_POINT('',#451235); +#451235 = CARTESIAN_POINT('',(148.964116,-156.476498,-7.5E-02)); +#451236 = LINE('',#451237,#451238); +#451237 = CARTESIAN_POINT('',(149.007158,-156.451612,-7.5E-02)); +#451238 = VECTOR('',#451239,1.); +#451239 = DIRECTION('',(-0.865714404314,-0.500538280418,0.)); +#451240 = ORIENTED_EDGE('',*,*,#451241,.T.); +#451241 = EDGE_CURVE('',#451234,#451242,#451244,.T.); +#451242 = VERTEX_POINT('',#451243); +#451243 = CARTESIAN_POINT('',(148.937361,-156.517499,-7.5E-02)); +#451244 = LINE('',#451245,#451246); +#451245 = CARTESIAN_POINT('',(148.964116,-156.476498,-7.5E-02)); +#451246 = VECTOR('',#451247,1.); +#451247 = DIRECTION('',(-0.546485833321,-0.837468348047,0.)); +#451248 = ORIENTED_EDGE('',*,*,#451249,.T.); +#451249 = EDGE_CURVE('',#451242,#451250,#451252,.T.); +#451250 = VERTEX_POINT('',#451251); +#451251 = CARTESIAN_POINT('',(148.887984,-156.654403,-7.5E-02)); +#451252 = LINE('',#451253,#451254); +#451253 = CARTESIAN_POINT('',(148.937361,-156.517499,-7.5E-02)); +#451254 = VECTOR('',#451255,1.); +#451255 = DIRECTION('',(-0.339276350956,-0.940686747904,0.)); +#451256 = ORIENTED_EDGE('',*,*,#451257,.T.); +#451257 = EDGE_CURVE('',#451250,#451258,#451260,.T.); +#451258 = VERTEX_POINT('',#451259); +#451259 = CARTESIAN_POINT('',(148.764535,-156.925567,-7.5E-02)); +#451260 = LINE('',#451261,#451262); +#451261 = CARTESIAN_POINT('',(148.887984,-156.654403,-7.5E-02)); +#451262 = VECTOR('',#451263,1.); +#451263 = DIRECTION('',(-0.414338717057,-0.910122754109,0.)); +#451264 = ORIENTED_EDGE('',*,*,#451265,.T.); +#451265 = EDGE_CURVE('',#451258,#451266,#451268,.T.); +#451266 = VERTEX_POINT('',#451267); +#451267 = CARTESIAN_POINT('',(148.738172,-156.994502,-7.5E-02)); +#451268 = LINE('',#451269,#451270); +#451269 = CARTESIAN_POINT('',(148.764535,-156.925567,-7.5E-02)); +#451270 = VECTOR('',#451271,1.); +#451271 = DIRECTION('',(-0.357202482006,-0.934026973298,0.)); +#451272 = ORIENTED_EDGE('',*,*,#451273,.T.); +#451273 = EDGE_CURVE('',#451266,#451274,#451276,.T.); +#451274 = VERTEX_POINT('',#451275); +#451275 = CARTESIAN_POINT('',(148.728815,-157.041159,-7.5E-02)); +#451276 = LINE('',#451277,#451278); +#451277 = CARTESIAN_POINT('',(148.738172,-156.994502,-7.5E-02)); +#451278 = VECTOR('',#451279,1.); +#451279 = DIRECTION('',(-0.196633389726,-0.980477082876,0.)); +#451280 = ORIENTED_EDGE('',*,*,#451281,.T.); +#451281 = EDGE_CURVE('',#451274,#451282,#451284,.T.); +#451282 = VERTEX_POINT('',#451283); +#451283 = CARTESIAN_POINT('',(148.753416,-157.080886,-7.5E-02)); +#451284 = LINE('',#451285,#451286); +#451285 = CARTESIAN_POINT('',(148.728815,-157.041159,-7.5E-02)); +#451286 = VECTOR('',#451287,1.); +#451287 = DIRECTION('',(0.526479855919,-0.850187603598,0.)); +#451288 = ORIENTED_EDGE('',*,*,#451289,.T.); +#451289 = EDGE_CURVE('',#451282,#451290,#451292,.T.); +#451290 = VERTEX_POINT('',#451291); +#451291 = CARTESIAN_POINT('',(148.812125,-157.146436,-7.5E-02)); +#451292 = LINE('',#451293,#451294); +#451293 = CARTESIAN_POINT('',(148.753416,-157.080886,-7.5E-02)); +#451294 = VECTOR('',#451295,1.); +#451295 = DIRECTION('',(0.667167147211,-0.744908046461,0.)); +#451296 = ORIENTED_EDGE('',*,*,#451297,.T.); +#451297 = EDGE_CURVE('',#451290,#451298,#451300,.T.); +#451298 = VERTEX_POINT('',#451299); +#451299 = CARTESIAN_POINT('',(149.023571,-157.346314,-7.5E-02)); +#451300 = LINE('',#451301,#451302); +#451301 = CARTESIAN_POINT('',(148.812125,-157.146436,-7.5E-02)); +#451302 = VECTOR('',#451303,1.); +#451303 = DIRECTION('',(0.726705984481,-0.686948624075,0.)); +#451304 = ORIENTED_EDGE('',*,*,#451305,.T.); +#451305 = EDGE_CURVE('',#451298,#451306,#451308,.T.); +#451306 = VERTEX_POINT('',#451307); +#451307 = CARTESIAN_POINT('',(149.227255,-157.532379,-7.5E-02)); +#451308 = LINE('',#451309,#451310); +#451309 = CARTESIAN_POINT('',(149.023571,-157.346314,-7.5E-02)); +#451310 = VECTOR('',#451311,1.); +#451311 = DIRECTION('',(0.738318239866,-0.674452501427,0.)); +#451312 = ORIENTED_EDGE('',*,*,#451313,.T.); +#451313 = EDGE_CURVE('',#451306,#451314,#451316,.T.); +#451314 = VERTEX_POINT('',#451315); +#451315 = CARTESIAN_POINT('',(149.350525,-157.65201,-7.5E-02)); +#451316 = LINE('',#451317,#451318); +#451317 = CARTESIAN_POINT('',(149.227255,-157.532379,-7.5E-02)); +#451318 = VECTOR('',#451319,1.); +#451319 = DIRECTION('',(0.717619711592,-0.696435172528,0.)); +#451320 = ORIENTED_EDGE('',*,*,#451321,.T.); +#451321 = EDGE_CURVE('',#451314,#451322,#451324,.T.); +#451322 = VERTEX_POINT('',#451323); +#451323 = CARTESIAN_POINT('',(149.447734,-157.75495,-7.5E-02)); +#451324 = LINE('',#451325,#451326); +#451325 = CARTESIAN_POINT('',(149.350525,-157.65201,-7.5E-02)); +#451326 = VECTOR('',#451327,1.); +#451327 = DIRECTION('',(0.686578319801,-0.72705585121,0.)); +#451328 = ORIENTED_EDGE('',*,*,#451329,.T.); +#451329 = EDGE_CURVE('',#451322,#451330,#451332,.T.); +#451330 = VERTEX_POINT('',#451331); +#451331 = CARTESIAN_POINT('',(149.523507,-157.846303,-7.5E-02)); +#451332 = LINE('',#451333,#451334); +#451333 = CARTESIAN_POINT('',(149.447734,-157.75495,-7.5E-02)); +#451334 = VECTOR('',#451335,1.); +#451335 = DIRECTION('',(0.638420004244,-0.769688182436,0.)); +#451336 = ORIENTED_EDGE('',*,*,#451337,.T.); +#451337 = EDGE_CURVE('',#451330,#451338,#451340,.T.); +#451338 = VERTEX_POINT('',#451339); +#451339 = CARTESIAN_POINT('',(149.65739,-158.077296,-7.5E-02)); +#451340 = CIRCLE('',#451341,1.003631100135); +#451341 = AXIS2_PLACEMENT_3D('',#451342,#451343,#451344); +#451342 = CARTESIAN_POINT('',(148.7298401302,-158.4606060888,-7.5E-02)); +#451343 = DIRECTION('',(0.,0.,-1.)); +#451344 = DIRECTION('',(0.790795412468,0.612080563014,0.)); +#451345 = ORIENTED_EDGE('',*,*,#451346,.T.); +#451346 = EDGE_CURVE('',#451338,#451347,#451349,.T.); +#451347 = VERTEX_POINT('',#451348); +#451348 = CARTESIAN_POINT('',(149.696902,-158.224255,-7.5E-02)); +#451349 = LINE('',#451350,#451351); +#451350 = CARTESIAN_POINT('',(149.65739,-158.077296,-7.5E-02)); +#451351 = VECTOR('',#451352,1.); +#451352 = DIRECTION('',(0.259643300435,-0.965704590721,0.)); +#451353 = ORIENTED_EDGE('',*,*,#451354,.T.); +#451354 = EDGE_CURVE('',#451347,#451355,#451357,.T.); +#451355 = VERTEX_POINT('',#451356); +#451356 = CARTESIAN_POINT('',(149.694557,-158.357816,-7.5E-02)); +#451357 = LINE('',#451358,#451359); +#451358 = CARTESIAN_POINT('',(149.696902,-158.224255,-7.5E-02)); +#451359 = VECTOR('',#451360,1.); +#451360 = DIRECTION('',(-1.755481496119E-02,-0.999845902363,0.)); +#451361 = ORIENTED_EDGE('',*,*,#451362,.T.); +#451362 = EDGE_CURVE('',#451355,#451363,#451365,.T.); +#451363 = VERTEX_POINT('',#451364); +#451364 = CARTESIAN_POINT('',(149.651296,-158.474747,-7.5E-02)); +#451365 = LINE('',#451366,#451367); +#451366 = CARTESIAN_POINT('',(149.694557,-158.357816,-7.5E-02)); +#451367 = VECTOR('',#451368,1.); +#451368 = DIRECTION('',(-0.346984401156,-0.937870900153,0.)); +#451369 = ORIENTED_EDGE('',*,*,#451370,.T.); +#451370 = EDGE_CURVE('',#451363,#451371,#451373,.T.); +#451371 = VERTEX_POINT('',#451372); +#451372 = CARTESIAN_POINT('',(149.411766,-158.657363,-7.5E-02)); +#451373 = CIRCLE('',#451374,0.426221628975); +#451374 = AXIS2_PLACEMENT_3D('',#451375,#451376,#451377); +#451375 = CARTESIAN_POINT('',(149.28978661584,-158.2489686968,-7.5E-02) + ); +#451376 = DIRECTION('',(0.,0.,-1.)); +#451377 = DIRECTION('',(0.848172311255,-0.52972042666,0.)); +#451378 = ORIENTED_EDGE('',*,*,#451379,.T.); +#451379 = EDGE_CURVE('',#451371,#451380,#451382,.T.); +#451380 = VERTEX_POINT('',#451381); +#451381 = CARTESIAN_POINT('',(149.307307,-158.67414,-7.5E-02)); +#451382 = LINE('',#451383,#451384); +#451383 = CARTESIAN_POINT('',(149.411766,-158.657363,-7.5E-02)); +#451384 = VECTOR('',#451385,1.); +#451385 = DIRECTION('',(-0.987346734412,-0.158576246788,0.)); +#451386 = ORIENTED_EDGE('',*,*,#451387,.T.); +#451387 = EDGE_CURVE('',#451380,#451388,#451390,.T.); +#451388 = VERTEX_POINT('',#451389); +#451389 = CARTESIAN_POINT('',(149.167778,-158.678838,-7.5E-02)); +#451390 = LINE('',#451391,#451392); +#451391 = CARTESIAN_POINT('',(149.307307,-158.67414,-7.5E-02)); +#451392 = VECTOR('',#451393,1.); +#451393 = DIRECTION('',(-0.999433632937,-3.365134995276E-02,0.)); +#451394 = ORIENTED_EDGE('',*,*,#451395,.T.); +#451395 = EDGE_CURVE('',#451388,#451396,#451398,.T.); +#451396 = VERTEX_POINT('',#451397); +#451397 = CARTESIAN_POINT('',(148.999826,-158.671394,-7.5E-02)); +#451398 = LINE('',#451399,#451400); +#451399 = CARTESIAN_POINT('',(149.167778,-158.678838,-7.5E-02)); +#451400 = VECTOR('',#451401,1.); +#451401 = DIRECTION('',(-0.99901921665,4.427871682841E-02,0.)); +#451402 = ORIENTED_EDGE('',*,*,#451403,.T.); +#451403 = EDGE_CURVE('',#451396,#451404,#451406,.T.); +#451404 = VERTEX_POINT('',#451405); +#451405 = CARTESIAN_POINT('',(148.716839,-158.638875,-7.5E-02)); +#451406 = LINE('',#451407,#451408); +#451407 = CARTESIAN_POINT('',(148.999826,-158.671394,-7.5E-02)); +#451408 = VECTOR('',#451409,1.); +#451409 = DIRECTION('',(-0.993462133624,0.114162117423,0.)); +#451410 = ORIENTED_EDGE('',*,*,#451411,.T.); +#451411 = EDGE_CURVE('',#451404,#451412,#451414,.T.); +#451412 = VERTEX_POINT('',#451413); +#451413 = CARTESIAN_POINT('',(148.649851,-158.625727,-7.5E-02)); +#451414 = LINE('',#451415,#451416); +#451415 = CARTESIAN_POINT('',(148.716839,-158.638875,-7.5E-02)); +#451416 = VECTOR('',#451417,1.); +#451417 = DIRECTION('',(-0.981277504087,0.19259922111,0.)); +#451418 = ORIENTED_EDGE('',*,*,#451419,.T.); +#451419 = EDGE_CURVE('',#451412,#451420,#451422,.T.); +#451420 = VERTEX_POINT('',#451421); +#451421 = CARTESIAN_POINT('',(148.607175,-158.608935,-7.5E-02)); +#451422 = LINE('',#451423,#451424); +#451423 = CARTESIAN_POINT('',(148.649851,-158.625727,-7.5E-02)); +#451424 = VECTOR('',#451425,1.); +#451425 = DIRECTION('',(-0.930555233959,0.366151548614,0.)); +#451426 = ORIENTED_EDGE('',*,*,#451427,.T.); +#451427 = EDGE_CURVE('',#451420,#451428,#451430,.T.); +#451428 = VERTEX_POINT('',#451429); +#451429 = CARTESIAN_POINT('',(148.577524,-158.583925,-7.5E-02)); +#451430 = LINE('',#451431,#451432); +#451431 = CARTESIAN_POINT('',(148.607175,-158.608935,-7.5E-02)); +#451432 = VECTOR('',#451433,1.); +#451433 = DIRECTION('',(-0.764393519149,0.644749988665,0.)); +#451434 = ORIENTED_EDGE('',*,*,#451435,.T.); +#451435 = EDGE_CURVE('',#451428,#451436,#451438,.T.); +#451436 = VERTEX_POINT('',#451437); +#451437 = CARTESIAN_POINT('',(148.498047,-158.39078,-7.5E-02)); +#451438 = CIRCLE('',#451439,0.336684633887); +#451439 = AXIS2_PLACEMENT_3D('',#451440,#451441,#451442); +#451440 = CARTESIAN_POINT('',(148.83378512633,-158.3655519755,-7.5E-02) + ); +#451441 = DIRECTION('',(0.,0.,-1.)); +#451442 = DIRECTION('',(-0.761131042359,-0.648598131633,-0.)); +#451443 = ORIENTED_EDGE('',*,*,#451444,.T.); +#451444 = EDGE_CURVE('',#451436,#451445,#451447,.T.); +#451445 = VERTEX_POINT('',#451446); +#451446 = CARTESIAN_POINT('',(148.503147,-158.316348,-7.5E-02)); +#451447 = LINE('',#451448,#451449); +#451448 = CARTESIAN_POINT('',(148.498047,-158.39078,-7.5E-02)); +#451449 = VECTOR('',#451450,1.); +#451450 = DIRECTION('',(6.835863799537E-02,0.997660812406,0.)); +#451451 = ORIENTED_EDGE('',*,*,#451452,.T.); +#451452 = EDGE_CURVE('',#451445,#451453,#451455,.T.); +#451453 = VERTEX_POINT('',#451454); +#451454 = CARTESIAN_POINT('',(148.53114,-158.266088,-7.5E-02)); +#451455 = LINE('',#451456,#451457); +#451456 = CARTESIAN_POINT('',(148.503147,-158.316348,-7.5E-02)); +#451457 = VECTOR('',#451458,1.); +#451458 = DIRECTION('',(0.486582770474,0.873634481622,0.)); +#451459 = ORIENTED_EDGE('',*,*,#451460,.T.); +#451460 = EDGE_CURVE('',#451453,#451461,#451463,.T.); +#451461 = VERTEX_POINT('',#451462); +#451462 = CARTESIAN_POINT('',(148.548075,-158.256934,-7.5E-02)); +#451463 = LINE('',#451464,#451465); +#451464 = CARTESIAN_POINT('',(148.53114,-158.266088,-7.5E-02)); +#451465 = VECTOR('',#451466,1.); +#451466 = DIRECTION('',(0.879707688161,0.475514861377,0.)); +#451467 = ORIENTED_EDGE('',*,*,#451468,.T.); +#451468 = EDGE_CURVE('',#451461,#451469,#451471,.T.); +#451469 = VERTEX_POINT('',#451470); +#451470 = CARTESIAN_POINT('',(148.585742,-158.250176,-7.5E-02)); +#451471 = LINE('',#451472,#451473); +#451472 = CARTESIAN_POINT('',(148.548075,-158.256934,-7.5E-02)); +#451473 = VECTOR('',#451474,1.); +#451474 = DIRECTION('',(0.984283670954,0.17659460664,0.)); +#451475 = ORIENTED_EDGE('',*,*,#451476,.T.); +#451476 = EDGE_CURVE('',#451469,#451477,#451479,.T.); +#451477 = VERTEX_POINT('',#451478); +#451478 = CARTESIAN_POINT('',(148.740779,-158.254689,-7.5E-02)); +#451479 = LINE('',#451480,#451481); +#451480 = CARTESIAN_POINT('',(148.585742,-158.250176,-7.5E-02)); +#451481 = VECTOR('',#451482,1.); +#451482 = DIRECTION('',(0.999576596866,-2.9096855471E-02,0.)); +#451483 = ORIENTED_EDGE('',*,*,#451484,.T.); +#451484 = EDGE_CURVE('',#451477,#451485,#451487,.T.); +#451485 = VERTEX_POINT('',#451486); +#451486 = CARTESIAN_POINT('',(149.035137,-158.277892,-7.5E-02)); +#451487 = LINE('',#451488,#451489); +#451488 = CARTESIAN_POINT('',(148.740779,-158.254689,-7.5E-02)); +#451489 = VECTOR('',#451490,1.); +#451490 = DIRECTION('',(0.996907651225,-7.85820267544E-02,0.)); +#451491 = ORIENTED_EDGE('',*,*,#451492,.T.); +#451492 = EDGE_CURVE('',#451485,#451493,#451495,.T.); +#451493 = VERTEX_POINT('',#451494); +#451494 = CARTESIAN_POINT('',(149.174572,-158.279559,-7.5E-02)); +#451495 = LINE('',#451496,#451497); +#451496 = CARTESIAN_POINT('',(149.035137,-158.277892,-7.5E-02)); +#451497 = VECTOR('',#451498,1.); +#451498 = DIRECTION('',(0.999928541968,-1.195453709226E-02,0.)); +#451499 = ORIENTED_EDGE('',*,*,#451500,.T.); +#451500 = EDGE_CURVE('',#451493,#451501,#451503,.T.); +#451501 = VERTEX_POINT('',#451502); +#451502 = CARTESIAN_POINT('',(149.278563,-158.268771,-7.5E-02)); +#451503 = LINE('',#451504,#451505); +#451504 = CARTESIAN_POINT('',(149.174572,-158.279559,-7.5E-02)); +#451505 = VECTOR('',#451506,1.); +#451506 = DIRECTION('',(0.994662078814,0.103185992117,0.)); +#451507 = ORIENTED_EDGE('',*,*,#451508,.T.); +#451508 = EDGE_CURVE('',#451501,#451509,#451511,.T.); +#451509 = VERTEX_POINT('',#451510); +#451510 = CARTESIAN_POINT('',(149.352043,-158.244983,-7.5E-02)); +#451511 = LINE('',#451512,#451513); +#451512 = CARTESIAN_POINT('',(149.278563,-158.268771,-7.5E-02)); +#451513 = VECTOR('',#451514,1.); +#451514 = DIRECTION('',(0.951387399042,0.307996780735,0.)); +#451515 = ORIENTED_EDGE('',*,*,#451516,.T.); +#451516 = EDGE_CURVE('',#451509,#451517,#451519,.T.); +#451517 = VERTEX_POINT('',#451518); +#451518 = CARTESIAN_POINT('',(149.399945,-158.207649,-7.5E-02)); +#451519 = LINE('',#451520,#451521); +#451520 = CARTESIAN_POINT('',(149.352043,-158.244983,-7.5E-02)); +#451521 = VECTOR('',#451522,1.); +#451522 = DIRECTION('',(0.788738287209,0.614729138964,0.)); +#451523 = ORIENTED_EDGE('',*,*,#451524,.T.); +#451524 = EDGE_CURVE('',#451517,#451525,#451527,.T.); +#451525 = VERTEX_POINT('',#451526); +#451526 = CARTESIAN_POINT('',(149.409022,-158.183315,-7.5E-02)); +#451527 = LINE('',#451528,#451529); +#451528 = CARTESIAN_POINT('',(149.399945,-158.207649,-7.5E-02)); +#451529 = VECTOR('',#451530,1.); +#451530 = DIRECTION('',(0.349494169357,0.936938538852,0.)); +#451531 = ORIENTED_EDGE('',*,*,#451532,.T.); +#451532 = EDGE_CURVE('',#451525,#451533,#451535,.T.); +#451533 = VERTEX_POINT('',#451534); +#451534 = CARTESIAN_POINT('',(149.392613,-158.125322,-7.5E-02)); +#451535 = LINE('',#451536,#451537); +#451536 = CARTESIAN_POINT('',(149.409022,-158.183315,-7.5E-02)); +#451537 = VECTOR('',#451538,1.); +#451538 = DIRECTION('',(-0.272259279721,0.962223926436,0.)); +#451539 = ORIENTED_EDGE('',*,*,#451540,.T.); +#451540 = EDGE_CURVE('',#451533,#451541,#451543,.T.); +#451541 = VERTEX_POINT('',#451542); +#451542 = CARTESIAN_POINT('',(149.338648,-158.046068,-7.5E-02)); +#451543 = LINE('',#451544,#451545); +#451544 = CARTESIAN_POINT('',(149.392613,-158.125322,-7.5E-02)); +#451545 = VECTOR('',#451546,1.); +#451546 = DIRECTION('',(-0.562825394109,0.826575813671,0.)); +#451547 = ORIENTED_EDGE('',*,*,#451548,.T.); +#451548 = EDGE_CURVE('',#451541,#451549,#451551,.T.); +#451549 = VERTEX_POINT('',#451550); +#451550 = CARTESIAN_POINT('',(149.248385,-157.947266,-7.5E-02)); +#451551 = LINE('',#451552,#451553); +#451552 = CARTESIAN_POINT('',(149.338648,-158.046068,-7.5E-02)); +#451553 = VECTOR('',#451554,1.); +#451554 = DIRECTION('',(-0.674483193374,0.738290201652,0.)); +#451555 = ORIENTED_EDGE('',*,*,#451556,.T.); +#451556 = EDGE_CURVE('',#451549,#451557,#451559,.T.); +#451557 = VERTEX_POINT('',#451558); +#451558 = CARTESIAN_POINT('',(148.985773,-157.709832,-7.5E-02)); +#451559 = LINE('',#451560,#451561); +#451560 = CARTESIAN_POINT('',(149.248385,-157.947266,-7.5E-02)); +#451561 = VECTOR('',#451562,1.); +#451562 = DIRECTION('',(-0.741770878824,0.670653385385,0.)); +#451563 = ORIENTED_EDGE('',*,*,#451564,.T.); +#451564 = EDGE_CURVE('',#451557,#451565,#451567,.T.); +#451565 = VERTEX_POINT('',#451566); +#451566 = CARTESIAN_POINT('',(148.659462,-157.423868,-7.5E-02)); +#451567 = LINE('',#451568,#451569); +#451568 = CARTESIAN_POINT('',(148.985773,-157.709832,-7.5E-02)); +#451569 = VECTOR('',#451570,1.); +#451570 = DIRECTION('',(-0.752071769849,0.659081218816,0.)); +#451571 = ORIENTED_EDGE('',*,*,#451572,.T.); +#451572 = EDGE_CURVE('',#451565,#451573,#451575,.T.); +#451573 = VERTEX_POINT('',#451574); +#451574 = CARTESIAN_POINT('',(148.605951,-157.385388,-7.5E-02)); +#451575 = LINE('',#451576,#451577); +#451576 = CARTESIAN_POINT('',(148.659462,-157.423868,-7.5E-02)); +#451577 = VECTOR('',#451578,1.); +#451578 = DIRECTION('',(-0.81187895579,0.583825796917,0.)); +#451579 = ORIENTED_EDGE('',*,*,#451580,.T.); +#451580 = EDGE_CURVE('',#451573,#451581,#451583,.T.); +#451581 = VERTEX_POINT('',#451582); +#451582 = CARTESIAN_POINT('',(148.559176,-157.363524,-7.5E-02)); +#451583 = LINE('',#451584,#451585); +#451584 = CARTESIAN_POINT('',(148.605951,-157.385388,-7.5E-02)); +#451585 = VECTOR('',#451586,1.); +#451586 = DIRECTION('',(-0.905918248724,0.423452626191,0.)); +#451587 = ORIENTED_EDGE('',*,*,#451588,.T.); +#451588 = EDGE_CURVE('',#451581,#451589,#451591,.T.); +#451589 = VERTEX_POINT('',#451590); +#451590 = CARTESIAN_POINT('',(148.507644,-157.352259,-7.5E-02)); +#451591 = LINE('',#451592,#451593); +#451592 = CARTESIAN_POINT('',(148.559176,-157.363524,-7.5E-02)); +#451593 = VECTOR('',#451594,1.); +#451594 = DIRECTION('',(-0.976930184559,0.213558925116,0.)); +#451595 = ORIENTED_EDGE('',*,*,#451596,.T.); +#451596 = EDGE_CURVE('',#451589,#451597,#451599,.T.); +#451597 = VERTEX_POINT('',#451598); +#451598 = CARTESIAN_POINT('',(148.439862,-157.345574,-7.5E-02)); +#451599 = LINE('',#451600,#451601); +#451600 = CARTESIAN_POINT('',(148.507644,-157.352259,-7.5E-02)); +#451601 = VECTOR('',#451602,1.); +#451602 = DIRECTION('',(-0.995171748817,9.814881739764E-02,0.)); +#451603 = ORIENTED_EDGE('',*,*,#451604,.T.); +#451604 = EDGE_CURVE('',#451597,#451605,#451607,.T.); +#451605 = VERTEX_POINT('',#451606); +#451606 = CARTESIAN_POINT('',(148.33358,-157.344092,-7.5E-02)); +#451607 = LINE('',#451608,#451609); +#451608 = CARTESIAN_POINT('',(148.439862,-157.345574,-7.5E-02)); +#451609 = VECTOR('',#451610,1.); +#451610 = DIRECTION('',(-0.999902796109,1.394268026424E-02,0.)); +#451611 = ORIENTED_EDGE('',*,*,#451612,.T.); +#451612 = EDGE_CURVE('',#451605,#451613,#451615,.T.); +#451613 = VERTEX_POINT('',#451614); +#451614 = CARTESIAN_POINT('',(148.156949,-157.367731,-7.5E-02)); +#451615 = LINE('',#451616,#451617); +#451616 = CARTESIAN_POINT('',(148.33358,-157.344092,-7.5E-02)); +#451617 = VECTOR('',#451618,1.); +#451618 = DIRECTION('',(-0.991162942969,-0.132649992407,0.)); +#451619 = ORIENTED_EDGE('',*,*,#451620,.T.); +#451620 = EDGE_CURVE('',#451613,#451621,#451623,.T.); +#451621 = VERTEX_POINT('',#451622); +#451622 = CARTESIAN_POINT('',(147.987006,-157.419459,-7.5E-02)); +#451623 = LINE('',#451624,#451625); +#451624 = CARTESIAN_POINT('',(148.156949,-157.367731,-7.5E-02)); +#451625 = VECTOR('',#451626,1.); +#451626 = DIRECTION('',(-0.956664130839,-0.291193648224,0.)); +#451627 = ORIENTED_EDGE('',*,*,#451628,.T.); +#451628 = EDGE_CURVE('',#451621,#451629,#451631,.T.); +#451629 = VERTEX_POINT('',#451630); +#451630 = CARTESIAN_POINT('',(147.841464,-157.494855,-7.5E-02)); +#451631 = LINE('',#451632,#451633); +#451632 = CARTESIAN_POINT('',(147.987006,-157.419459,-7.5E-02)); +#451633 = VECTOR('',#451634,1.); +#451634 = DIRECTION('',(-0.88792953848,-0.459979493777,0.)); +#451635 = ORIENTED_EDGE('',*,*,#451636,.T.); +#451636 = EDGE_CURVE('',#451629,#451637,#451639,.T.); +#451637 = VERTEX_POINT('',#451638); +#451638 = CARTESIAN_POINT('',(147.74722,-157.550769,-7.5E-02)); +#451639 = LINE('',#451640,#451641); +#451640 = CARTESIAN_POINT('',(147.841464,-157.494855,-7.5E-02)); +#451641 = VECTOR('',#451642,1.); +#451642 = DIRECTION('',(-0.860028455078,-0.510246074416,0.)); +#451643 = ORIENTED_EDGE('',*,*,#451644,.T.); +#451644 = EDGE_CURVE('',#451637,#451645,#451647,.T.); +#451645 = VERTEX_POINT('',#451646); +#451646 = CARTESIAN_POINT('',(147.706471,-157.559856,-7.5E-02)); +#451647 = LINE('',#451648,#451649); +#451648 = CARTESIAN_POINT('',(147.74722,-157.550769,-7.5E-02)); +#451649 = VECTOR('',#451650,1.); +#451650 = DIRECTION('',(-0.976026172296,-0.217653189714,0.)); +#451651 = ORIENTED_EDGE('',*,*,#451652,.T.); +#451652 = EDGE_CURVE('',#451645,#451653,#451655,.T.); +#451653 = VERTEX_POINT('',#451654); +#451654 = CARTESIAN_POINT('',(147.669901,-157.550176,-7.5E-02)); +#451655 = LINE('',#451656,#451657); +#451656 = CARTESIAN_POINT('',(147.706471,-157.559856,-7.5E-02)); +#451657 = VECTOR('',#451658,1.); +#451658 = DIRECTION('',(-0.966707151115,0.25588529458,0.)); +#451659 = ORIENTED_EDGE('',*,*,#451660,.T.); +#451660 = EDGE_CURVE('',#451653,#451661,#451663,.T.); +#451661 = VERTEX_POINT('',#451662); +#451662 = CARTESIAN_POINT('',(147.653769,-157.540689,-7.5E-02)); +#451663 = LINE('',#451664,#451665); +#451664 = CARTESIAN_POINT('',(147.669901,-157.550176,-7.5E-02)); +#451665 = VECTOR('',#451666,1.); +#451666 = DIRECTION('',(-0.86199052801,0.506924382547,0.)); +#451667 = ORIENTED_EDGE('',*,*,#451668,.T.); +#451668 = EDGE_CURVE('',#451661,#451669,#451671,.T.); +#451669 = VERTEX_POINT('',#451670); +#451670 = CARTESIAN_POINT('',(147.603332,-157.48657,-7.5E-02)); +#451671 = LINE('',#451672,#451673); +#451672 = CARTESIAN_POINT('',(147.653769,-157.540689,-7.5E-02)); +#451673 = VECTOR('',#451674,1.); +#451674 = DIRECTION('',(-0.681782985849,0.73155448205,0.)); +#451675 = ORIENTED_EDGE('',*,*,#451676,.T.); +#451676 = EDGE_CURVE('',#451669,#451677,#451679,.T.); +#451677 = VERTEX_POINT('',#451678); +#451678 = CARTESIAN_POINT('',(147.560767,-157.409874,-7.5E-02)); +#451679 = LINE('',#451680,#451681); +#451680 = CARTESIAN_POINT('',(147.603332,-157.48657,-7.5E-02)); +#451681 = VECTOR('',#451682,1.); +#451682 = DIRECTION('',(-0.485260539141,0.874369606718,0.)); +#451683 = ORIENTED_EDGE('',*,*,#451684,.T.); +#451684 = EDGE_CURVE('',#451677,#451685,#451687,.T.); +#451685 = VERTEX_POINT('',#451686); +#451686 = CARTESIAN_POINT('',(147.534557,-157.328569,-7.5E-02)); +#451687 = LINE('',#451688,#451689); +#451688 = CARTESIAN_POINT('',(147.560767,-157.409874,-7.5E-02)); +#451689 = VECTOR('',#451690,1.); +#451690 = DIRECTION('',(-0.306818079627,0.951768178715,0.)); +#451691 = ORIENTED_EDGE('',*,*,#451692,.T.); +#451692 = EDGE_CURVE('',#451685,#451693,#451695,.T.); +#451693 = VERTEX_POINT('',#451694); +#451694 = CARTESIAN_POINT('',(147.533184,-157.260621,-7.5E-02)); +#451695 = LINE('',#451696,#451697); +#451696 = CARTESIAN_POINT('',(147.534557,-157.328569,-7.5E-02)); +#451697 = VECTOR('',#451698,1.); +#451698 = DIRECTION('',(-2.020250459878E-02,0.999795908577,0.)); +#451699 = ORIENTED_EDGE('',*,*,#451700,.T.); +#451700 = EDGE_CURVE('',#451693,#451701,#451703,.T.); +#451701 = VERTEX_POINT('',#451702); +#451702 = CARTESIAN_POINT('',(147.544952,-157.232011,-7.5E-02)); +#451703 = LINE('',#451704,#451705); +#451704 = CARTESIAN_POINT('',(147.533184,-157.260621,-7.5E-02)); +#451705 = VECTOR('',#451706,1.); +#451706 = DIRECTION('',(0.380401853043,0.92482129636,0.)); +#451707 = ORIENTED_EDGE('',*,*,#451708,.T.); +#451708 = EDGE_CURVE('',#451701,#451709,#451711,.T.); +#451709 = VERTEX_POINT('',#451710); +#451710 = CARTESIAN_POINT('',(147.601034,-157.16872,-7.5E-02)); +#451711 = LINE('',#451712,#451713); +#451712 = CARTESIAN_POINT('',(147.544952,-157.232011,-7.5E-02)); +#451713 = VECTOR('',#451714,1.); +#451714 = DIRECTION('',(0.663195977414,0.748445786642,0.)); +#451715 = ORIENTED_EDGE('',*,*,#451716,.T.); +#451716 = EDGE_CURVE('',#451709,#451717,#451719,.T.); +#451717 = VERTEX_POINT('',#451718); +#451718 = CARTESIAN_POINT('',(147.692385,-157.107828,-7.5E-02)); +#451719 = LINE('',#451720,#451721); +#451720 = CARTESIAN_POINT('',(147.601034,-157.16872,-7.5E-02)); +#451721 = VECTOR('',#451722,1.); +#451722 = DIRECTION('',(0.83208672725,0.554645542968,0.)); +#451723 = ORIENTED_EDGE('',*,*,#451724,.T.); +#451724 = EDGE_CURVE('',#451717,#451725,#451727,.T.); +#451725 = VERTEX_POINT('',#451726); +#451726 = CARTESIAN_POINT('',(147.811446,-157.052543,-7.5E-02)); +#451727 = LINE('',#451728,#451729); +#451728 = CARTESIAN_POINT('',(147.692385,-157.107828,-7.5E-02)); +#451729 = VECTOR('',#451730,1.); +#451730 = DIRECTION('',(0.906989534456,0.421153160249,0.)); +#451731 = ORIENTED_EDGE('',*,*,#451732,.T.); +#451732 = EDGE_CURVE('',#451725,#451733,#451735,.T.); +#451733 = VERTEX_POINT('',#451734); +#451734 = CARTESIAN_POINT('',(148.259298,-156.952418,-7.5E-02)); +#451735 = CIRCLE('',#451736,1.534965493326); +#451736 = AXIS2_PLACEMENT_3D('',#451737,#451738,#451739); +#451737 = CARTESIAN_POINT('',(148.36650945258,-158.4836347613,-7.5E-02) + ); +#451738 = DIRECTION('',(0.,0.,-1.)); +#451739 = DIRECTION('',(-0.361612984133,0.932328295026,0.)); +#451740 = ORIENTED_EDGE('',*,*,#451741,.T.); +#451741 = EDGE_CURVE('',#451733,#451742,#451744,.T.); +#451742 = VERTEX_POINT('',#451743); +#451743 = CARTESIAN_POINT('',(148.450319,-156.939597,-7.5E-02)); +#451744 = LINE('',#451745,#451746); +#451745 = CARTESIAN_POINT('',(148.259298,-156.952418,-7.5E-02)); +#451746 = VECTOR('',#451747,1.); +#451747 = DIRECTION('',(0.997755150298,6.696760451452E-02,0.)); +#451748 = ORIENTED_EDGE('',*,*,#451749,.T.); +#451749 = EDGE_CURVE('',#451742,#451750,#451752,.T.); +#451750 = VERTEX_POINT('',#451751); +#451751 = CARTESIAN_POINT('',(148.450371,-156.868799,-7.5E-02)); +#451752 = LINE('',#451753,#451754); +#451753 = CARTESIAN_POINT('',(148.450319,-156.939597,-7.5E-02)); +#451754 = VECTOR('',#451755,1.); +#451755 = DIRECTION('',(7.344838266091E-04,0.999999730267,0.)); +#451756 = ORIENTED_EDGE('',*,*,#451757,.T.); +#451757 = EDGE_CURVE('',#451750,#451758,#451760,.T.); +#451758 = VERTEX_POINT('',#451759); +#451759 = CARTESIAN_POINT('',(148.460803,-156.799065,-7.5E-02)); +#451760 = LINE('',#451761,#451762); +#451761 = CARTESIAN_POINT('',(148.450371,-156.868799,-7.5E-02)); +#451762 = VECTOR('',#451763,1.); +#451763 = DIRECTION('',(0.147950685771,0.98899473941,0.)); +#451764 = ORIENTED_EDGE('',*,*,#451765,.T.); +#451765 = EDGE_CURVE('',#451758,#451766,#451768,.T.); +#451766 = VERTEX_POINT('',#451767); +#451767 = CARTESIAN_POINT('',(148.510009,-156.645122,-7.5E-02)); +#451768 = LINE('',#451769,#451770); +#451769 = CARTESIAN_POINT('',(148.460803,-156.799065,-7.5E-02)); +#451770 = VECTOR('',#451771,1.); +#451771 = DIRECTION('',(0.304462742851,0.952524245474,0.)); +#451772 = ORIENTED_EDGE('',*,*,#451773,.T.); +#451773 = EDGE_CURVE('',#451766,#451774,#451776,.T.); +#451774 = VERTEX_POINT('',#451775); +#451775 = CARTESIAN_POINT('',(147.988679,-156.870315,-7.5E-02)); +#451776 = LINE('',#451777,#451778); +#451777 = CARTESIAN_POINT('',(148.510009,-156.645122,-7.5E-02)); +#451778 = VECTOR('',#451779,1.); +#451779 = DIRECTION('',(-0.91801541658,-0.396544694734,0.)); +#451780 = ORIENTED_EDGE('',*,*,#451781,.T.); +#451781 = EDGE_CURVE('',#451774,#451782,#451784,.T.); +#451782 = VERTEX_POINT('',#451783); +#451783 = CARTESIAN_POINT('',(147.571309,-157.031009,-7.5E-02)); +#451784 = LINE('',#451785,#451786); +#451785 = CARTESIAN_POINT('',(147.988679,-156.870315,-7.5E-02)); +#451786 = VECTOR('',#451787,1.); +#451787 = DIRECTION('',(-0.93322038211,-0.359304492615,0.)); +#451788 = ORIENTED_EDGE('',*,*,#451789,.T.); +#451789 = EDGE_CURVE('',#451782,#451790,#451792,.T.); +#451790 = VERTEX_POINT('',#451791); +#451791 = CARTESIAN_POINT('',(147.312517,-157.118404,-7.5E-02)); +#451792 = LINE('',#451793,#451794); +#451793 = CARTESIAN_POINT('',(147.571309,-157.031009,-7.5E-02)); +#451794 = VECTOR('',#451795,1.); +#451795 = DIRECTION('',(-0.947433806525,-0.319951843648,0.)); +#451796 = ORIENTED_EDGE('',*,*,#451797,.T.); +#451797 = EDGE_CURVE('',#451790,#451798,#451800,.T.); +#451798 = VERTEX_POINT('',#451799); +#451799 = CARTESIAN_POINT('',(147.20568,-157.059601,-7.5E-02)); +#451800 = LINE('',#451801,#451802); +#451801 = CARTESIAN_POINT('',(147.312517,-157.118404,-7.5E-02)); +#451802 = VECTOR('',#451803,1.); +#451803 = DIRECTION('',(-0.876068188034,0.48218723533,0.)); +#451804 = ORIENTED_EDGE('',*,*,#451805,.T.); +#451805 = EDGE_CURVE('',#451798,#451806,#451808,.T.); +#451806 = VERTEX_POINT('',#451807); +#451807 = CARTESIAN_POINT('',(147.144387,-157.004159,-7.5E-02)); +#451808 = LINE('',#451809,#451810); +#451809 = CARTESIAN_POINT('',(147.20568,-157.059601,-7.5E-02)); +#451810 = VECTOR('',#451811,1.); +#451811 = DIRECTION('',(-0.741617468191,0.670823025002,0.)); +#451812 = ORIENTED_EDGE('',*,*,#451813,.T.); +#451813 = EDGE_CURVE('',#451806,#451814,#451816,.T.); +#451814 = VERTEX_POINT('',#451815); +#451815 = CARTESIAN_POINT('',(147.097673,-156.936746,-7.5E-02)); +#451816 = LINE('',#451817,#451818); +#451817 = CARTESIAN_POINT('',(147.144387,-157.004159,-7.5E-02)); +#451818 = VECTOR('',#451819,1.); +#451819 = DIRECTION('',(-0.569568145298,0.821944114804,0.)); +#451820 = ORIENTED_EDGE('',*,*,#451821,.T.); +#451821 = EDGE_CURVE('',#451814,#451822,#451824,.T.); +#451822 = VERTEX_POINT('',#451823); +#451823 = CARTESIAN_POINT('',(147.07317,-156.870422,-7.5E-02)); +#451824 = LINE('',#451825,#451826); +#451825 = CARTESIAN_POINT('',(147.097673,-156.936746,-7.5E-02)); +#451826 = VECTOR('',#451827,1.); +#451827 = DIRECTION('',(-0.346550048785,0.938031483313,0.)); +#451828 = ORIENTED_EDGE('',*,*,#451829,.T.); +#451829 = EDGE_CURVE('',#451822,#451830,#451832,.T.); +#451830 = VERTEX_POINT('',#451831); +#451831 = CARTESIAN_POINT('',(147.078512,-156.818241,-7.5E-02)); +#451832 = LINE('',#451833,#451834); +#451833 = CARTESIAN_POINT('',(147.07317,-156.870422,-7.5E-02)); +#451834 = VECTOR('',#451835,1.); +#451835 = DIRECTION('',(0.101842139043,0.994800572334,0.)); +#451836 = ORIENTED_EDGE('',*,*,#451837,.T.); +#451837 = EDGE_CURVE('',#451830,#451838,#451840,.T.); +#451838 = VERTEX_POINT('',#451839); +#451839 = CARTESIAN_POINT('',(147.106856,-156.797228,-7.5E-02)); +#451840 = LINE('',#451841,#451842); +#451841 = CARTESIAN_POINT('',(147.078512,-156.818241,-7.5E-02)); +#451842 = VECTOR('',#451843,1.); +#451843 = DIRECTION('',(0.803320655191,0.59554674455,0.)); +#451844 = ORIENTED_EDGE('',*,*,#451845,.T.); +#451845 = EDGE_CURVE('',#451838,#451846,#451848,.T.); +#451846 = VERTEX_POINT('',#451847); +#451847 = CARTESIAN_POINT('',(147.258973,-156.729938,-7.5E-02)); +#451848 = LINE('',#451849,#451850); +#451849 = CARTESIAN_POINT('',(147.106856,-156.797228,-7.5E-02)); +#451850 = VECTOR('',#451851,1.); +#451851 = DIRECTION('',(0.914518699542,0.404543629523,0.)); +#451852 = ORIENTED_EDGE('',*,*,#451853,.T.); +#451853 = EDGE_CURVE('',#451846,#451854,#451856,.T.); +#451854 = VERTEX_POINT('',#451855); +#451855 = CARTESIAN_POINT('',(147.602436,-156.604311,-7.5E-02)); +#451856 = LINE('',#451857,#451858); +#451857 = CARTESIAN_POINT('',(147.258973,-156.729938,-7.5E-02)); +#451858 = VECTOR('',#451859,1.); +#451859 = DIRECTION('',(0.939149489883,0.343508712629,0.)); +#451860 = ORIENTED_EDGE('',*,*,#451861,.T.); +#451861 = EDGE_CURVE('',#451854,#451862,#451864,.T.); +#451862 = VERTEX_POINT('',#451863); +#451863 = CARTESIAN_POINT('',(147.894622,-156.483047,-7.5E-02)); +#451864 = LINE('',#451865,#451866); +#451865 = CARTESIAN_POINT('',(147.602436,-156.604311,-7.5E-02)); +#451866 = VECTOR('',#451867,1.); +#451867 = DIRECTION('',(0.923614892123,0.383321706989,0.)); +#451868 = ORIENTED_EDGE('',*,*,#451869,.T.); +#451869 = EDGE_CURVE('',#451862,#451870,#451872,.T.); +#451870 = VERTEX_POINT('',#451871); +#451871 = CARTESIAN_POINT('',(148.341504,-156.288453,-7.5E-02)); +#451872 = LINE('',#451873,#451874); +#451873 = CARTESIAN_POINT('',(147.894622,-156.483047,-7.5E-02)); +#451874 = VECTOR('',#451875,1.); +#451875 = DIRECTION('',(0.916846742352,0.399239340545,0.)); +#451876 = ORIENTED_EDGE('',*,*,#451877,.T.); +#451877 = EDGE_CURVE('',#451870,#451878,#451880,.T.); +#451878 = VERTEX_POINT('',#451879); +#451879 = CARTESIAN_POINT('',(148.55715,-156.2018,-7.5E-02)); +#451880 = LINE('',#451881,#451882); +#451881 = CARTESIAN_POINT('',(148.341504,-156.288453,-7.5E-02)); +#451882 = VECTOR('',#451883,1.); +#451883 = DIRECTION('',(0.927890054272,0.372853922043,0.)); +#451884 = ORIENTED_EDGE('',*,*,#451885,.T.); +#451885 = EDGE_CURVE('',#451878,#451144,#451886,.T.); +#451886 = LINE('',#451887,#451888); +#451887 = CARTESIAN_POINT('',(148.55715,-156.2018,-7.5E-02)); +#451888 = VECTOR('',#451889,1.); +#451889 = DIRECTION('',(0.939845009989,0.341601166857,0.)); +#451890 = PLANE('',#451891); +#451891 = AXIS2_PLACEMENT_3D('',#451892,#451893,#451894); +#451892 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#451893 = DIRECTION('',(-0.,-0.,-1.)); +#451894 = DIRECTION('',(-1.,0.,0.)); +#451895 = SHELL_BASED_SURFACE_MODEL('',(#451896)); +#451896 = OPEN_SHELL('',(#451897)); +#451897 = ADVANCED_FACE('',(#451898),#451984,.T.); +#451898 = FACE_BOUND('',#451899,.T.); +#451899 = EDGE_LOOP('',(#451900,#451911,#451919,#451928,#451936,#451945, + #451953,#451961,#451969,#451978)); +#451900 = ORIENTED_EDGE('',*,*,#451901,.T.); +#451901 = EDGE_CURVE('',#451902,#451904,#451906,.T.); +#451902 = VERTEX_POINT('',#451903); +#451903 = CARTESIAN_POINT('',(136.49,-154.59,-7.5E-02)); +#451904 = VERTEX_POINT('',#451905); +#451905 = CARTESIAN_POINT('',(136.55,-154.53,-7.5E-02)); +#451906 = CIRCLE('',#451907,5.999932016255E-02); +#451907 = AXIS2_PLACEMENT_3D('',#451908,#451909,#451910); +#451908 = CARTESIAN_POINT('',(136.54999932015,-154.5899993201,-7.5E-02) + ); +#451909 = DIRECTION('',(0.,0.,-1.)); +#451910 = DIRECTION('',(-0.999999999936,-1.133081706883E-05,-0.)); +#451911 = ORIENTED_EDGE('',*,*,#451912,.T.); +#451912 = EDGE_CURVE('',#451904,#451913,#451915,.T.); +#451913 = VERTEX_POINT('',#451914); +#451914 = CARTESIAN_POINT('',(138.25,-154.53,-7.5E-02)); +#451915 = LINE('',#451916,#451917); +#451916 = CARTESIAN_POINT('',(136.55,-154.53,-7.5E-02)); +#451917 = VECTOR('',#451918,1.); +#451918 = DIRECTION('',(1.,0.,0.)); +#451919 = ORIENTED_EDGE('',*,*,#451920,.T.); +#451920 = EDGE_CURVE('',#451913,#451921,#451923,.T.); +#451921 = VERTEX_POINT('',#451922); +#451922 = CARTESIAN_POINT('',(138.31,-154.59,-7.5E-02)); +#451923 = CIRCLE('',#451924,5.999932016262E-02); +#451924 = AXIS2_PLACEMENT_3D('',#451925,#451926,#451927); +#451925 = CARTESIAN_POINT('',(138.25000067984,-154.5899993201,-7.5E-02) + ); +#451926 = DIRECTION('',(0.,0.,-1.)); +#451927 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#451928 = ORIENTED_EDGE('',*,*,#451929,.T.); +#451929 = EDGE_CURVE('',#451921,#451930,#451932,.T.); +#451930 = VERTEX_POINT('',#451931); +#451931 = CARTESIAN_POINT('',(138.31,-157.25,-7.5E-02)); +#451932 = LINE('',#451933,#451934); +#451933 = CARTESIAN_POINT('',(138.31,-154.59,-7.5E-02)); +#451934 = VECTOR('',#451935,1.); +#451935 = DIRECTION('',(0.,-1.,0.)); +#451936 = ORIENTED_EDGE('',*,*,#451937,.T.); +#451937 = EDGE_CURVE('',#451930,#451938,#451940,.T.); +#451938 = VERTEX_POINT('',#451939); +#451939 = CARTESIAN_POINT('',(138.19,-157.25,-7.5E-02)); +#451940 = CIRCLE('',#451941,6.000000000042E-02); +#451941 = AXIS2_PLACEMENT_3D('',#451942,#451943,#451944); +#451942 = CARTESIAN_POINT('',(138.25,-157.2500002255,-7.5E-02)); +#451943 = DIRECTION('',(0.,0.,-1.)); +#451944 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#451945 = ORIENTED_EDGE('',*,*,#451946,.T.); +#451946 = EDGE_CURVE('',#451938,#451947,#451949,.T.); +#451947 = VERTEX_POINT('',#451948); +#451948 = CARTESIAN_POINT('',(138.19,-154.65,-7.5E-02)); +#451949 = LINE('',#451950,#451951); +#451950 = CARTESIAN_POINT('',(138.19,-157.25,-7.5E-02)); +#451951 = VECTOR('',#451952,1.); +#451952 = DIRECTION('',(0.,1.,0.)); +#451953 = ORIENTED_EDGE('',*,*,#451954,.T.); +#451954 = EDGE_CURVE('',#451947,#451955,#451957,.T.); +#451955 = VERTEX_POINT('',#451956); +#451956 = CARTESIAN_POINT('',(136.61,-154.65,-7.5E-02)); +#451957 = LINE('',#451958,#451959); +#451958 = CARTESIAN_POINT('',(138.19,-154.65,-7.5E-02)); +#451959 = VECTOR('',#451960,1.); +#451960 = DIRECTION('',(-1.,0.,0.)); +#451961 = ORIENTED_EDGE('',*,*,#451962,.T.); +#451962 = EDGE_CURVE('',#451955,#451963,#451965,.T.); +#451963 = VERTEX_POINT('',#451964); +#451964 = CARTESIAN_POINT('',(136.61,-157.25,-7.5E-02)); +#451965 = LINE('',#451966,#451967); +#451966 = CARTESIAN_POINT('',(136.61,-154.65,-7.5E-02)); +#451967 = VECTOR('',#451968,1.); +#451968 = DIRECTION('',(0.,-1.,0.)); +#451969 = ORIENTED_EDGE('',*,*,#451970,.T.); +#451970 = EDGE_CURVE('',#451963,#451971,#451973,.T.); +#451971 = VERTEX_POINT('',#451972); +#451972 = CARTESIAN_POINT('',(136.49,-157.25,-7.5E-02)); +#451973 = CIRCLE('',#451974,6.000000000043E-02); +#451974 = AXIS2_PLACEMENT_3D('',#451975,#451976,#451977); +#451975 = CARTESIAN_POINT('',(136.55,-157.2500002255,-7.5E-02)); +#451976 = DIRECTION('',(0.,0.,-1.)); +#451977 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#451978 = ORIENTED_EDGE('',*,*,#451979,.T.); +#451979 = EDGE_CURVE('',#451971,#451902,#451980,.T.); +#451980 = LINE('',#451981,#451982); +#451981 = CARTESIAN_POINT('',(136.49,-157.25,-7.5E-02)); +#451982 = VECTOR('',#451983,1.); +#451983 = DIRECTION('',(0.,1.,0.)); +#451984 = PLANE('',#451985); +#451985 = AXIS2_PLACEMENT_3D('',#451986,#451987,#451988); +#451986 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#451987 = DIRECTION('',(-0.,-0.,-1.)); +#451988 = DIRECTION('',(-1.,0.,0.)); +#451989 = SHELL_BASED_SURFACE_MODEL('',(#451990)); +#451990 = OPEN_SHELL('',(#451991)); +#451991 = ADVANCED_FACE('',(#451992),#452352,.T.); +#451992 = FACE_BOUND('',#451993,.T.); +#451993 = EDGE_LOOP('',(#451994,#452005,#452013,#452021,#452029,#452037, + #452046,#452054,#452063,#452071,#452079,#452087,#452095,#452103, + #452111,#452119,#452128,#452136,#452144,#452152,#452160,#452168, + #452176,#452184,#452193,#452201,#452209,#452217,#452225,#452233, + #452241,#452249,#452258,#452266,#452274,#452282,#452290,#452298, + #452306,#452314,#452322,#452330,#452338,#452346)); +#451994 = ORIENTED_EDGE('',*,*,#451995,.T.); +#451995 = EDGE_CURVE('',#451996,#451998,#452000,.T.); +#451996 = VERTEX_POINT('',#451997); +#451997 = CARTESIAN_POINT('',(146.696213,-154.247478,-7.5E-02)); +#451998 = VERTEX_POINT('',#451999); +#451999 = CARTESIAN_POINT('',(147.097049,-154.121556,-7.5E-02)); +#452000 = CIRCLE('',#452001,0.641689013068); +#452001 = AXIS2_PLACEMENT_3D('',#452002,#452003,#452004); +#452002 = CARTESIAN_POINT('',(147.07835190703,-154.7629725637,-7.5E-02) + ); +#452003 = DIRECTION('',(0.,0.,-1.)); +#452004 = DIRECTION('',(-0.595520414495,0.803340174471,0.)); +#452005 = ORIENTED_EDGE('',*,*,#452006,.T.); +#452006 = EDGE_CURVE('',#451998,#452007,#452009,.T.); +#452007 = VERTEX_POINT('',#452008); +#452008 = CARTESIAN_POINT('',(147.149257,-154.123111,-7.5E-02)); +#452009 = LINE('',#452010,#452011); +#452010 = CARTESIAN_POINT('',(147.097049,-154.121556,-7.5E-02)); +#452011 = VECTOR('',#452012,1.); +#452012 = DIRECTION('',(0.999556730511,-2.977150467247E-02,0.)); +#452013 = ORIENTED_EDGE('',*,*,#452014,.T.); +#452014 = EDGE_CURVE('',#452007,#452015,#452017,.T.); +#452015 = VERTEX_POINT('',#452016); +#452016 = CARTESIAN_POINT('',(147.313301,-154.153744,-7.5E-02)); +#452017 = LINE('',#452018,#452019); +#452018 = CARTESIAN_POINT('',(147.149257,-154.123111,-7.5E-02)); +#452019 = VECTOR('',#452020,1.); +#452020 = DIRECTION('',(0.98300786654,-0.183563434052,0.)); +#452021 = ORIENTED_EDGE('',*,*,#452022,.T.); +#452022 = EDGE_CURVE('',#452015,#452023,#452025,.T.); +#452023 = VERTEX_POINT('',#452024); +#452024 = CARTESIAN_POINT('',(147.458505,-154.22531,-7.5E-02)); +#452025 = LINE('',#452026,#452027); +#452026 = CARTESIAN_POINT('',(147.313301,-154.153744,-7.5E-02)); +#452027 = VECTOR('',#452028,1.); +#452028 = DIRECTION('',(0.896972421744,-0.442086501299,0.)); +#452029 = ORIENTED_EDGE('',*,*,#452030,.T.); +#452030 = EDGE_CURVE('',#452023,#452031,#452033,.T.); +#452031 = VERTEX_POINT('',#452032); +#452032 = CARTESIAN_POINT('',(147.607636,-154.359605,-7.5E-02)); +#452033 = LINE('',#452034,#452035); +#452034 = CARTESIAN_POINT('',(147.458505,-154.22531,-7.5E-02)); +#452035 = VECTOR('',#452036,1.); +#452036 = DIRECTION('',(0.743103086878,-0.669176958863,0.)); +#452037 = ORIENTED_EDGE('',*,*,#452038,.T.); +#452038 = EDGE_CURVE('',#452031,#452039,#452041,.T.); +#452039 = VERTEX_POINT('',#452040); +#452040 = CARTESIAN_POINT('',(147.818254,-154.822124,-7.5E-02)); +#452041 = CIRCLE('',#452042,0.825893539945); +#452042 = AXIS2_PLACEMENT_3D('',#452043,#452044,#452045); +#452043 = CARTESIAN_POINT('',(146.99777420683,-154.9165329419,-7.5E-02) + ); +#452044 = DIRECTION('',(0.,0.,-1.)); +#452045 = DIRECTION('',(0.738426641779,0.674333815489,0.)); +#452046 = ORIENTED_EDGE('',*,*,#452047,.T.); +#452047 = EDGE_CURVE('',#452039,#452048,#452050,.T.); +#452048 = VERTEX_POINT('',#452049); +#452049 = CARTESIAN_POINT('',(147.829836,-155.024338,-7.5E-02)); +#452050 = LINE('',#452051,#452052); +#452051 = CARTESIAN_POINT('',(147.818254,-154.822124,-7.5E-02)); +#452052 = VECTOR('',#452053,1.); +#452053 = DIRECTION('',(5.718223780663E-02,-0.998363757194,0.)); +#452054 = ORIENTED_EDGE('',*,*,#452055,.T.); +#452055 = EDGE_CURVE('',#452048,#452056,#452058,.T.); +#452056 = VERTEX_POINT('',#452057); +#452057 = CARTESIAN_POINT('',(147.77142,-155.441818,-7.5E-02)); +#452058 = CIRCLE('',#452059,1.393656585599); +#452059 = AXIS2_PLACEMENT_3D('',#452060,#452061,#452062); +#452060 = CARTESIAN_POINT('',(146.43629354049,-155.042173138,-7.5E-02)); +#452061 = DIRECTION('',(0.,0.,-1.)); +#452062 = DIRECTION('',(0.999918110317,1.279736930022E-02,0.)); +#452063 = ORIENTED_EDGE('',*,*,#452064,.T.); +#452064 = EDGE_CURVE('',#452056,#452065,#452067,.T.); +#452065 = VERTEX_POINT('',#452066); +#452066 = CARTESIAN_POINT('',(147.725761,-155.578633,-7.5E-02)); +#452067 = LINE('',#452068,#452069); +#452068 = CARTESIAN_POINT('',(147.77142,-155.441818,-7.5E-02)); +#452069 = VECTOR('',#452070,1.); +#452070 = DIRECTION('',(-0.316564701424,-0.948570919759,0.)); +#452071 = ORIENTED_EDGE('',*,*,#452072,.T.); +#452072 = EDGE_CURVE('',#452065,#452073,#452075,.T.); +#452073 = VERTEX_POINT('',#452074); +#452074 = CARTESIAN_POINT('',(147.580337,-155.931205,-7.5E-02)); +#452075 = LINE('',#452076,#452077); +#452076 = CARTESIAN_POINT('',(147.725761,-155.578633,-7.5E-02)); +#452077 = VECTOR('',#452078,1.); +#452078 = DIRECTION('',(-0.381304145943,-0.924449646161,0.)); +#452079 = ORIENTED_EDGE('',*,*,#452080,.T.); +#452080 = EDGE_CURVE('',#452073,#452081,#452083,.T.); +#452081 = VERTEX_POINT('',#452082); +#452082 = CARTESIAN_POINT('',(147.356513,-156.45989,-7.5E-02)); +#452083 = LINE('',#452084,#452085); +#452084 = CARTESIAN_POINT('',(147.580337,-155.931205,-7.5E-02)); +#452085 = VECTOR('',#452086,1.); +#452086 = DIRECTION('',(-0.389860961196,-0.920873732352,0.)); +#452087 = ORIENTED_EDGE('',*,*,#452088,.T.); +#452088 = EDGE_CURVE('',#452081,#452089,#452091,.T.); +#452089 = VERTEX_POINT('',#452090); +#452090 = CARTESIAN_POINT('',(147.30691,-156.579497,-7.5E-02)); +#452091 = LINE('',#452092,#452093); +#452092 = CARTESIAN_POINT('',(147.356513,-156.45989,-7.5E-02)); +#452093 = VECTOR('',#452094,1.); +#452094 = DIRECTION('',(-0.383079956999,-0.923715186919,0.)); +#452095 = ORIENTED_EDGE('',*,*,#452096,.T.); +#452096 = EDGE_CURVE('',#452089,#452097,#452099,.T.); +#452097 = VERTEX_POINT('',#452098); +#452098 = CARTESIAN_POINT('',(147.27869,-156.624811,-7.5E-02)); +#452099 = LINE('',#452100,#452101); +#452100 = CARTESIAN_POINT('',(147.30691,-156.579497,-7.5E-02)); +#452101 = VECTOR('',#452102,1.); +#452102 = DIRECTION('',(-0.528634351837,-0.84884964632,0.)); +#452103 = ORIENTED_EDGE('',*,*,#452104,.T.); +#452104 = EDGE_CURVE('',#452097,#452105,#452107,.T.); +#452105 = VERTEX_POINT('',#452106); +#452106 = CARTESIAN_POINT('',(147.229322,-156.643568,-7.5E-02)); +#452107 = LINE('',#452108,#452109); +#452108 = CARTESIAN_POINT('',(147.27869,-156.624811,-7.5E-02)); +#452109 = VECTOR('',#452110,1.); +#452110 = DIRECTION('',(-0.934801435973,-0.355170769213,0.)); +#452111 = ORIENTED_EDGE('',*,*,#452112,.T.); +#452112 = EDGE_CURVE('',#452105,#452113,#452115,.T.); +#452113 = VERTEX_POINT('',#452114); +#452114 = CARTESIAN_POINT('',(147.168291,-156.630347,-7.5E-02)); +#452115 = LINE('',#452116,#452117); +#452116 = CARTESIAN_POINT('',(147.229322,-156.643568,-7.5E-02)); +#452117 = VECTOR('',#452118,1.); +#452118 = DIRECTION('',(-0.977331037844,0.211716892257,0.)); +#452119 = ORIENTED_EDGE('',*,*,#452120,.T.); +#452120 = EDGE_CURVE('',#452113,#452121,#452123,.T.); +#452121 = VERTEX_POINT('',#452122); +#452122 = CARTESIAN_POINT('',(147.007258,-156.467678,-7.5E-02)); +#452123 = CIRCLE('',#452124,0.322557902267); +#452124 = AXIS2_PLACEMENT_3D('',#452125,#452126,#452127); +#452125 = CARTESIAN_POINT('',(147.30209278068,-156.3368496681,-7.5E-02) + ); +#452126 = DIRECTION('',(0.,0.,-1.)); +#452127 = DIRECTION('',(-0.414814765796,-0.909905879791,-0.)); +#452128 = ORIENTED_EDGE('',*,*,#452129,.T.); +#452129 = EDGE_CURVE('',#452121,#452130,#452132,.T.); +#452130 = VERTEX_POINT('',#452131); +#452131 = CARTESIAN_POINT('',(146.991614,-156.395407,-7.5E-02)); +#452132 = LINE('',#452133,#452134); +#452133 = CARTESIAN_POINT('',(147.007258,-156.467678,-7.5E-02)); +#452134 = VECTOR('',#452135,1.); +#452135 = DIRECTION('',(-0.211563244702,0.977364309503,0.)); +#452136 = ORIENTED_EDGE('',*,*,#452137,.T.); +#452137 = EDGE_CURVE('',#452130,#452138,#452140,.T.); +#452138 = VERTEX_POINT('',#452139); +#452139 = CARTESIAN_POINT('',(147.016422,-156.304626,-7.5E-02)); +#452140 = LINE('',#452141,#452142); +#452141 = CARTESIAN_POINT('',(146.991614,-156.395407,-7.5E-02)); +#452142 = VECTOR('',#452143,1.); +#452143 = DIRECTION('',(0.263607389434,0.964630055636,0.)); +#452144 = ORIENTED_EDGE('',*,*,#452145,.T.); +#452145 = EDGE_CURVE('',#452138,#452146,#452148,.T.); +#452146 = VERTEX_POINT('',#452147); +#452147 = CARTESIAN_POINT('',(147.118952,-156.04381,-7.5E-02)); +#452148 = LINE('',#452149,#452150); +#452149 = CARTESIAN_POINT('',(147.016422,-156.304626,-7.5E-02)); +#452150 = VECTOR('',#452151,1.); +#452151 = DIRECTION('',(0.365858150107,0.930670625947,0.)); +#452152 = ORIENTED_EDGE('',*,*,#452153,.T.); +#452153 = EDGE_CURVE('',#452146,#452154,#452156,.T.); +#452154 = VERTEX_POINT('',#452155); +#452155 = CARTESIAN_POINT('',(147.383891,-155.426124,-7.5E-02)); +#452156 = LINE('',#452157,#452158); +#452157 = CARTESIAN_POINT('',(147.118952,-156.04381,-7.5E-02)); +#452158 = VECTOR('',#452159,1.); +#452159 = DIRECTION('',(0.394191328269,0.91902839821,0.)); +#452160 = ORIENTED_EDGE('',*,*,#452161,.T.); +#452161 = EDGE_CURVE('',#452154,#452162,#452164,.T.); +#452162 = VERTEX_POINT('',#452163); +#452163 = CARTESIAN_POINT('',(147.43292,-155.297842,-7.5E-02)); +#452164 = LINE('',#452165,#452166); +#452165 = CARTESIAN_POINT('',(147.383891,-155.426124,-7.5E-02)); +#452166 = VECTOR('',#452167,1.); +#452167 = DIRECTION('',(0.357010405613,0.934100406961,0.)); +#452168 = ORIENTED_EDGE('',*,*,#452169,.T.); +#452169 = EDGE_CURVE('',#452162,#452170,#452172,.T.); +#452170 = VERTEX_POINT('',#452171); +#452171 = CARTESIAN_POINT('',(147.466562,-155.190203,-7.5E-02)); +#452172 = LINE('',#452173,#452174); +#452173 = CARTESIAN_POINT('',(147.43292,-155.297842,-7.5E-02)); +#452174 = VECTOR('',#452175,1.); +#452175 = DIRECTION('',(0.298313870183,0.954467828089,0.)); +#452176 = ORIENTED_EDGE('',*,*,#452177,.T.); +#452177 = EDGE_CURVE('',#452170,#452178,#452180,.T.); +#452178 = VERTEX_POINT('',#452179); +#452179 = CARTESIAN_POINT('',(147.487387,-155.09395,-7.5E-02)); +#452180 = LINE('',#452181,#452182); +#452181 = CARTESIAN_POINT('',(147.466562,-155.190203,-7.5E-02)); +#452182 = VECTOR('',#452183,1.); +#452183 = DIRECTION('',(0.21146414513,0.977385755638,0.)); +#452184 = ORIENTED_EDGE('',*,*,#452185,.T.); +#452185 = EDGE_CURVE('',#452178,#452186,#452188,.T.); +#452186 = VERTEX_POINT('',#452187); +#452187 = CARTESIAN_POINT('',(147.48355,-154.667509,-7.5E-02)); +#452188 = CIRCLE('',#452189,1.378498863701); +#452189 = AXIS2_PLACEMENT_3D('',#452190,#452191,#452192); +#452190 = CARTESIAN_POINT('',(146.12361597318,-154.8929830782,-7.5E-02) + ); +#452191 = DIRECTION('',(0.,-0.,1.)); +#452192 = DIRECTION('',(0.989316032623,-0.145786788138,-0.)); +#452193 = ORIENTED_EDGE('',*,*,#452194,.T.); +#452194 = EDGE_CURVE('',#452186,#452195,#452197,.T.); +#452195 = VERTEX_POINT('',#452196); +#452196 = CARTESIAN_POINT('',(147.452132,-154.573427,-7.5E-02)); +#452197 = LINE('',#452198,#452199); +#452198 = CARTESIAN_POINT('',(147.48355,-154.667509,-7.5E-02)); +#452199 = VECTOR('',#452200,1.); +#452200 = DIRECTION('',(-0.316747935975,0.948509749584,0.)); +#452201 = ORIENTED_EDGE('',*,*,#452202,.T.); +#452202 = EDGE_CURVE('',#452195,#452203,#452205,.T.); +#452203 = VERTEX_POINT('',#452204); +#452204 = CARTESIAN_POINT('',(147.401366,-154.512053,-7.5E-02)); +#452205 = LINE('',#452206,#452207); +#452206 = CARTESIAN_POINT('',(147.452132,-154.573427,-7.5E-02)); +#452207 = VECTOR('',#452208,1.); +#452208 = DIRECTION('',(-0.637371897773,0.77055633404,0.)); +#452209 = ORIENTED_EDGE('',*,*,#452210,.T.); +#452210 = EDGE_CURVE('',#452203,#452211,#452213,.T.); +#452211 = VERTEX_POINT('',#452212); +#452212 = CARTESIAN_POINT('',(147.328328,-154.478746,-7.5E-02)); +#452213 = LINE('',#452214,#452215); +#452214 = CARTESIAN_POINT('',(147.401366,-154.512053,-7.5E-02)); +#452215 = VECTOR('',#452216,1.); +#452216 = DIRECTION('',(-0.909859396261,0.414916713372,0.)); +#452217 = ORIENTED_EDGE('',*,*,#452218,.T.); +#452218 = EDGE_CURVE('',#452211,#452219,#452221,.T.); +#452219 = VERTEX_POINT('',#452220); +#452220 = CARTESIAN_POINT('',(147.230093,-154.468867,-7.5E-02)); +#452221 = LINE('',#452222,#452223); +#452222 = CARTESIAN_POINT('',(147.328328,-154.478746,-7.5E-02)); +#452223 = VECTOR('',#452224,1.); +#452224 = DIRECTION('',(-0.994981377486,0.10006027412,0.)); +#452225 = ORIENTED_EDGE('',*,*,#452226,.T.); +#452226 = EDGE_CURVE('',#452219,#452227,#452229,.T.); +#452227 = VERTEX_POINT('',#452228); +#452228 = CARTESIAN_POINT('',(147.118925,-154.485032,-7.5E-02)); +#452229 = LINE('',#452230,#452231); +#452230 = CARTESIAN_POINT('',(147.230093,-154.468867,-7.5E-02)); +#452231 = VECTOR('',#452232,1.); +#452232 = DIRECTION('',(-0.989592639927,-0.143897209848,0.)); +#452233 = ORIENTED_EDGE('',*,*,#452234,.T.); +#452234 = EDGE_CURVE('',#452227,#452235,#452237,.T.); +#452235 = VERTEX_POINT('',#452236); +#452236 = CARTESIAN_POINT('',(146.987029,-154.540592,-7.5E-02)); +#452237 = LINE('',#452238,#452239); +#452238 = CARTESIAN_POINT('',(147.118925,-154.485032,-7.5E-02)); +#452239 = VECTOR('',#452240,1.); +#452240 = DIRECTION('',(-0.921573284832,-0.388204431562,0.)); +#452241 = ORIENTED_EDGE('',*,*,#452242,.T.); +#452242 = EDGE_CURVE('',#452235,#452243,#452245,.T.); +#452243 = VERTEX_POINT('',#452244); +#452244 = CARTESIAN_POINT('',(146.860572,-154.629361,-7.5E-02)); +#452245 = LINE('',#452246,#452247); +#452246 = CARTESIAN_POINT('',(146.987029,-154.540592,-7.5E-02)); +#452247 = VECTOR('',#452248,1.); +#452248 = DIRECTION('',(-0.818473767398,-0.574543899176,0.)); +#452249 = ORIENTED_EDGE('',*,*,#452250,.T.); +#452250 = EDGE_CURVE('',#452243,#452251,#452253,.T.); +#452251 = VERTEX_POINT('',#452252); +#452252 = CARTESIAN_POINT('',(146.580401,-155.050231,-7.5E-02)); +#452253 = CIRCLE('',#452254,0.922890115179); +#452254 = AXIS2_PLACEMENT_3D('',#452255,#452256,#452257); +#452255 = CARTESIAN_POINT('',(147.45933880073,-155.3316461863,-7.5E-02) + ); +#452256 = DIRECTION('',(0.,0.,1.)); +#452257 = DIRECTION('',(-0.648795334229,0.760962951977,0.)); +#452258 = ORIENTED_EDGE('',*,*,#452259,.T.); +#452259 = EDGE_CURVE('',#452251,#452260,#452262,.T.); +#452260 = VERTEX_POINT('',#452261); +#452261 = CARTESIAN_POINT('',(146.53745,-155.088515,-7.5E-02)); +#452262 = LINE('',#452263,#452264); +#452263 = CARTESIAN_POINT('',(146.580401,-155.050231,-7.5E-02)); +#452264 = VECTOR('',#452265,1.); +#452265 = DIRECTION('',(-0.746499571459,-0.66538589541,0.)); +#452266 = ORIENTED_EDGE('',*,*,#452267,.T.); +#452267 = EDGE_CURVE('',#452260,#452268,#452270,.T.); +#452268 = VERTEX_POINT('',#452269); +#452269 = CARTESIAN_POINT('',(146.477423,-155.095166,-7.5E-02)); +#452270 = LINE('',#452271,#452272); +#452271 = CARTESIAN_POINT('',(146.53745,-155.088515,-7.5E-02)); +#452272 = VECTOR('',#452273,1.); +#452273 = DIRECTION('',(-0.993917611164,-0.110126210403,0.)); +#452274 = ORIENTED_EDGE('',*,*,#452275,.T.); +#452275 = EDGE_CURVE('',#452268,#452276,#452278,.T.); +#452276 = VERTEX_POINT('',#452277); +#452277 = CARTESIAN_POINT('',(146.410037,-155.072727,-7.5E-02)); +#452278 = LINE('',#452279,#452280); +#452279 = CARTESIAN_POINT('',(146.477423,-155.095166,-7.5E-02)); +#452280 = VECTOR('',#452281,1.); +#452281 = DIRECTION('',(-0.948780403799,0.315936299541,0.)); +#452282 = ORIENTED_EDGE('',*,*,#452283,.T.); +#452283 = EDGE_CURVE('',#452276,#452284,#452286,.T.); +#452284 = VERTEX_POINT('',#452285); +#452285 = CARTESIAN_POINT('',(146.345012,-155.02374,-7.5E-02)); +#452286 = LINE('',#452287,#452288); +#452287 = CARTESIAN_POINT('',(146.410037,-155.072727,-7.5E-02)); +#452288 = VECTOR('',#452289,1.); +#452289 = DIRECTION('',(-0.798711378143,0.601714329582,0.)); +#452290 = ORIENTED_EDGE('',*,*,#452291,.T.); +#452291 = EDGE_CURVE('',#452284,#452292,#452294,.T.); +#452292 = VERTEX_POINT('',#452293); +#452293 = CARTESIAN_POINT('',(146.292065,-154.950748,-7.5E-02)); +#452294 = LINE('',#452295,#452296); +#452295 = CARTESIAN_POINT('',(146.345012,-155.02374,-7.5E-02)); +#452296 = VECTOR('',#452297,1.); +#452297 = DIRECTION('',(-0.587169631266,0.80946391156,0.)); +#452298 = ORIENTED_EDGE('',*,*,#452299,.T.); +#452299 = EDGE_CURVE('',#452292,#452300,#452302,.T.); +#452300 = VERTEX_POINT('',#452301); +#452301 = CARTESIAN_POINT('',(146.263379,-154.880451,-7.5E-02)); +#452302 = LINE('',#452303,#452304); +#452303 = CARTESIAN_POINT('',(146.292065,-154.950748,-7.5E-02)); +#452304 = VECTOR('',#452305,1.); +#452305 = DIRECTION('',(-0.377821882737,0.925878299197,0.)); +#452306 = ORIENTED_EDGE('',*,*,#452307,.T.); +#452307 = EDGE_CURVE('',#452300,#452308,#452310,.T.); +#452308 = VERTEX_POINT('',#452309); +#452309 = CARTESIAN_POINT('',(146.265322,-154.834584,-7.5E-02)); +#452310 = LINE('',#452311,#452312); +#452311 = CARTESIAN_POINT('',(146.263379,-154.880451,-7.5E-02)); +#452312 = VECTOR('',#452313,1.); +#452313 = DIRECTION('',(4.232365273994E-02,0.999103952759,0.)); +#452314 = ORIENTED_EDGE('',*,*,#452315,.T.); +#452315 = EDGE_CURVE('',#452308,#452316,#452318,.T.); +#452316 = VERTEX_POINT('',#452317); +#452317 = CARTESIAN_POINT('',(146.285855,-154.768396,-7.5E-02)); +#452318 = LINE('',#452319,#452320); +#452319 = CARTESIAN_POINT('',(146.265322,-154.834584,-7.5E-02)); +#452320 = VECTOR('',#452321,1.); +#452321 = DIRECTION('',(0.296292552609,0.955097232363,0.)); +#452322 = ORIENTED_EDGE('',*,*,#452323,.T.); +#452323 = EDGE_CURVE('',#452316,#452324,#452326,.T.); +#452324 = VERTEX_POINT('',#452325); +#452325 = CARTESIAN_POINT('',(146.343128,-154.635073,-7.5E-02)); +#452326 = LINE('',#452327,#452328); +#452327 = CARTESIAN_POINT('',(146.285855,-154.768396,-7.5E-02)); +#452328 = VECTOR('',#452329,1.); +#452329 = DIRECTION('',(0.394702659194,0.918808908765,0.)); +#452330 = ORIENTED_EDGE('',*,*,#452331,.T.); +#452331 = EDGE_CURVE('',#452324,#452332,#452334,.T.); +#452332 = VERTEX_POINT('',#452333); +#452333 = CARTESIAN_POINT('',(146.437765,-154.489899,-7.5E-02)); +#452334 = LINE('',#452335,#452336); +#452335 = CARTESIAN_POINT('',(146.343128,-154.635073,-7.5E-02)); +#452336 = VECTOR('',#452337,1.); +#452337 = DIRECTION('',(0.546098964384,0.837720670092,0.)); +#452338 = ORIENTED_EDGE('',*,*,#452339,.T.); +#452339 = EDGE_CURVE('',#452332,#452340,#452342,.T.); +#452340 = VERTEX_POINT('',#452341); +#452341 = CARTESIAN_POINT('',(146.568222,-154.35227,-7.5E-02)); +#452342 = LINE('',#452343,#452344); +#452343 = CARTESIAN_POINT('',(146.437765,-154.489899,-7.5E-02)); +#452344 = VECTOR('',#452345,1.); +#452345 = DIRECTION('',(0.68794369244,0.725764063613,0.)); +#452346 = ORIENTED_EDGE('',*,*,#452347,.T.); +#452347 = EDGE_CURVE('',#452340,#451996,#452348,.T.); +#452348 = LINE('',#452349,#452350); +#452349 = CARTESIAN_POINT('',(146.568222,-154.35227,-7.5E-02)); +#452350 = VECTOR('',#452351,1.); +#452351 = DIRECTION('',(0.773743664643,0.633498809332,0.)); +#452352 = PLANE('',#452353); +#452353 = AXIS2_PLACEMENT_3D('',#452354,#452355,#452356); +#452354 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#452355 = DIRECTION('',(-0.,-0.,-1.)); +#452356 = DIRECTION('',(-1.,0.,0.)); +#452357 = SHELL_BASED_SURFACE_MODEL('',(#452358)); +#452358 = OPEN_SHELL('',(#452359)); +#452359 = ADVANCED_FACE('',(#452360,#453326,#453360,#453394,#453428, + #453462),#453562,.T.); +#452360 = FACE_BOUND('',#452361,.T.); +#452361 = EDGE_LOOP('',(#452362,#452372,#452380,#452388,#452396,#452405, + #452413,#452421,#452429,#452437,#452445,#452453,#452461,#452469, + #452477,#452485,#452493,#452501,#452509,#452517,#452525,#452533, + #452541,#452549,#452557,#452566,#452574,#452582,#452590,#452598, + #452606,#452614,#452622,#452630,#452638,#452646,#452654,#452662, + #452670,#452678,#452686,#452694,#452702,#452710,#452718,#452726, + #452734,#452742,#452750,#452758,#452766,#452774,#452782,#452790, + #452798,#452806,#452814,#452822,#452830,#452838,#452846,#452854, + #452862,#452870,#452878,#452886,#452894,#452902,#452910,#452918, + #452926,#452934,#452942,#452950,#452958,#452966,#452974,#452982, + #452990,#452998,#453006,#453014,#453022,#453030,#453038,#453046, + #453054,#453062,#453070,#453078,#453086,#453094,#453102,#453110, + #453118,#453126,#453134,#453142,#453150,#453158,#453166,#453174, + #453182,#453190,#453198,#453206,#453214,#453222,#453230,#453238, + #453246,#453254,#453262,#453270,#453278,#453286,#453294,#453303, + #453311,#453320)); +#452362 = ORIENTED_EDGE('',*,*,#452363,.T.); +#452363 = EDGE_CURVE('',#452364,#452366,#452368,.T.); +#452364 = VERTEX_POINT('',#452365); +#452365 = CARTESIAN_POINT('',(146.406837,-152.728624,-7.5E-02)); +#452366 = VERTEX_POINT('',#452367); +#452367 = CARTESIAN_POINT('',(146.649225,-152.679626,-7.5E-02)); +#452368 = LINE('',#452369,#452370); +#452369 = CARTESIAN_POINT('',(146.406837,-152.728624,-7.5E-02)); +#452370 = VECTOR('',#452371,1.); +#452371 = DIRECTION('',(0.980173894688,0.198139183837,0.)); +#452372 = ORIENTED_EDGE('',*,*,#452373,.T.); +#452373 = EDGE_CURVE('',#452366,#452374,#452376,.T.); +#452374 = VERTEX_POINT('',#452375); +#452375 = CARTESIAN_POINT('',(146.924236,-152.663027,-7.5E-02)); +#452376 = LINE('',#452377,#452378); +#452377 = CARTESIAN_POINT('',(146.649225,-152.679626,-7.5E-02)); +#452378 = VECTOR('',#452379,1.); +#452379 = DIRECTION('',(0.998183442761,6.024794268739E-02,0.)); +#452380 = ORIENTED_EDGE('',*,*,#452381,.T.); +#452381 = EDGE_CURVE('',#452374,#452382,#452384,.T.); +#452382 = VERTEX_POINT('',#452383); +#452383 = CARTESIAN_POINT('',(147.094865,-152.669828,-7.5E-02)); +#452384 = LINE('',#452385,#452386); +#452385 = CARTESIAN_POINT('',(146.924236,-152.663027,-7.5E-02)); +#452386 = VECTOR('',#452387,1.); +#452387 = DIRECTION('',(0.999206598953,-3.982678254856E-02,0.)); +#452388 = ORIENTED_EDGE('',*,*,#452389,.T.); +#452389 = EDGE_CURVE('',#452382,#452390,#452392,.T.); +#452390 = VERTEX_POINT('',#452391); +#452391 = CARTESIAN_POINT('',(147.358835,-152.712589,-7.5E-02)); +#452392 = LINE('',#452393,#452394); +#452393 = CARTESIAN_POINT('',(147.094865,-152.669828,-7.5E-02)); +#452394 = VECTOR('',#452395,1.); +#452395 = DIRECTION('',(0.987132021702,-0.159907384854,0.)); +#452396 = ORIENTED_EDGE('',*,*,#452397,.T.); +#452397 = EDGE_CURVE('',#452390,#452398,#452400,.T.); +#452398 = VERTEX_POINT('',#452399); +#452399 = CARTESIAN_POINT('',(148.020017,-153.086977,-7.5E-02)); +#452400 = CIRCLE('',#452401,1.389968778892); +#452401 = AXIS2_PLACEMENT_3D('',#452402,#452403,#452404); +#452402 = CARTESIAN_POINT('',(147.03062288775,-154.063251806,-7.5E-02)); +#452403 = DIRECTION('',(0.,0.,-1.)); +#452404 = DIRECTION('',(0.236129125512,0.971721686536,0.)); +#452405 = ORIENTED_EDGE('',*,*,#452406,.T.); +#452406 = EDGE_CURVE('',#452398,#452407,#452409,.T.); +#452407 = VERTEX_POINT('',#452408); +#452408 = CARTESIAN_POINT('',(148.138153,-153.217851,-7.5E-02)); +#452409 = LINE('',#452410,#452411); +#452410 = CARTESIAN_POINT('',(148.020017,-153.086977,-7.5E-02)); +#452411 = VECTOR('',#452412,1.); +#452412 = DIRECTION('',(0.670058907342,-0.742307928485,0.)); +#452413 = ORIENTED_EDGE('',*,*,#452414,.T.); +#452414 = EDGE_CURVE('',#452407,#452415,#452417,.T.); +#452415 = VERTEX_POINT('',#452416); +#452416 = CARTESIAN_POINT('',(148.19325,-153.292756,-7.5E-02)); +#452417 = LINE('',#452418,#452419); +#452418 = CARTESIAN_POINT('',(148.138153,-153.217851,-7.5E-02)); +#452419 = VECTOR('',#452420,1.); +#452420 = DIRECTION('',(0.592528611027,-0.805549405756,0.)); +#452421 = ORIENTED_EDGE('',*,*,#452422,.T.); +#452422 = EDGE_CURVE('',#452415,#452423,#452425,.T.); +#452423 = VERTEX_POINT('',#452424); +#452424 = CARTESIAN_POINT('',(148.317032,-153.494596,-7.5E-02)); +#452425 = LINE('',#452426,#452427); +#452426 = CARTESIAN_POINT('',(148.19325,-153.292756,-7.5E-02)); +#452427 = VECTOR('',#452428,1.); +#452428 = DIRECTION('',(0.522788042479,-0.852462704545,0.)); +#452429 = ORIENTED_EDGE('',*,*,#452430,.T.); +#452430 = EDGE_CURVE('',#452423,#452431,#452433,.T.); +#452431 = VERTEX_POINT('',#452432); +#452432 = CARTESIAN_POINT('',(148.602521,-154.019687,-7.5E-02)); +#452433 = LINE('',#452434,#452435); +#452434 = CARTESIAN_POINT('',(148.317032,-153.494596,-7.5E-02)); +#452435 = VECTOR('',#452436,1.); +#452436 = DIRECTION('',(0.477659856906,-0.878544854347,0.)); +#452437 = ORIENTED_EDGE('',*,*,#452438,.T.); +#452438 = EDGE_CURVE('',#452431,#452439,#452441,.T.); +#452439 = VERTEX_POINT('',#452440); +#452440 = CARTESIAN_POINT('',(148.630929,-154.058533,-7.5E-02)); +#452441 = LINE('',#452442,#452443); +#452442 = CARTESIAN_POINT('',(148.602521,-154.019687,-7.5E-02)); +#452443 = VECTOR('',#452444,1.); +#452444 = DIRECTION('',(0.590294758794,-0.807187771055,0.)); +#452445 = ORIENTED_EDGE('',*,*,#452446,.T.); +#452446 = EDGE_CURVE('',#452439,#452447,#452449,.T.); +#452447 = VERTEX_POINT('',#452448); +#452448 = CARTESIAN_POINT('',(148.655164,-154.077397,-7.5E-02)); +#452449 = LINE('',#452450,#452451); +#452450 = CARTESIAN_POINT('',(148.630929,-154.058533,-7.5E-02)); +#452451 = VECTOR('',#452452,1.); +#452452 = DIRECTION('',(0.789122479919,-0.614235876261,0.)); +#452453 = ORIENTED_EDGE('',*,*,#452454,.T.); +#452454 = EDGE_CURVE('',#452447,#452455,#452457,.T.); +#452455 = VERTEX_POINT('',#452456); +#452456 = CARTESIAN_POINT('',(148.680372,-154.082481,-7.5E-02)); +#452457 = LINE('',#452458,#452459); +#452458 = CARTESIAN_POINT('',(148.655164,-154.077397,-7.5E-02)); +#452459 = VECTOR('',#452460,1.); +#452460 = DIRECTION('',(0.980262315836,-0.197701269983,0.)); +#452461 = ORIENTED_EDGE('',*,*,#452462,.T.); +#452462 = EDGE_CURVE('',#452455,#452463,#452465,.T.); +#452463 = VERTEX_POINT('',#452464); +#452464 = CARTESIAN_POINT('',(148.767003,-154.080452,-7.5E-02)); +#452465 = LINE('',#452466,#452467); +#452466 = CARTESIAN_POINT('',(148.680372,-154.082481,-7.5E-02)); +#452467 = VECTOR('',#452468,1.); +#452468 = DIRECTION('',(0.999725837019,2.341475595694E-02,0.)); +#452469 = ORIENTED_EDGE('',*,*,#452470,.T.); +#452470 = EDGE_CURVE('',#452463,#452471,#452473,.T.); +#452471 = VERTEX_POINT('',#452472); +#452472 = CARTESIAN_POINT('',(148.8186,-154.107121,-7.5E-02)); +#452473 = LINE('',#452474,#452475); +#452474 = CARTESIAN_POINT('',(148.767003,-154.080452,-7.5E-02)); +#452475 = VECTOR('',#452476,1.); +#452476 = DIRECTION('',(0.888351821276,-0.459163414958,0.)); +#452477 = ORIENTED_EDGE('',*,*,#452478,.T.); +#452478 = EDGE_CURVE('',#452471,#452479,#452481,.T.); +#452479 = VERTEX_POINT('',#452480); +#452480 = CARTESIAN_POINT('',(148.919591,-154.293626,-7.5E-02)); +#452481 = LINE('',#452482,#452483); +#452482 = CARTESIAN_POINT('',(148.8186,-154.107121,-7.5E-02)); +#452483 = VECTOR('',#452484,1.); +#452484 = DIRECTION('',(0.476164518077,-0.879356214355,0.)); +#452485 = ORIENTED_EDGE('',*,*,#452486,.T.); +#452486 = EDGE_CURVE('',#452479,#452487,#452489,.T.); +#452487 = VERTEX_POINT('',#452488); +#452488 = CARTESIAN_POINT('',(149.312113,-155.095632,-7.5E-02)); +#452489 = LINE('',#452490,#452491); +#452490 = CARTESIAN_POINT('',(148.919591,-154.293626,-7.5E-02)); +#452491 = VECTOR('',#452492,1.); +#452492 = DIRECTION('',(0.439598925515,-0.898194179833,0.)); +#452493 = ORIENTED_EDGE('',*,*,#452494,.T.); +#452494 = EDGE_CURVE('',#452487,#452495,#452497,.T.); +#452495 = VERTEX_POINT('',#452496); +#452496 = CARTESIAN_POINT('',(149.435922,-155.367156,-7.5E-02)); +#452497 = LINE('',#452498,#452499); +#452498 = CARTESIAN_POINT('',(149.312113,-155.095632,-7.5E-02)); +#452499 = VECTOR('',#452500,1.); +#452500 = DIRECTION('',(0.414882980652,-0.909874778398,0.)); +#452501 = ORIENTED_EDGE('',*,*,#452502,.T.); +#452502 = EDGE_CURVE('',#452495,#452503,#452505,.T.); +#452503 = VERTEX_POINT('',#452504); +#452504 = CARTESIAN_POINT('',(149.445845,-155.396122,-7.5E-02)); +#452505 = LINE('',#452506,#452507); +#452506 = CARTESIAN_POINT('',(149.435922,-155.367156,-7.5E-02)); +#452507 = VECTOR('',#452508,1.); +#452508 = DIRECTION('',(0.324084672437,-0.946028078384,0.)); +#452509 = ORIENTED_EDGE('',*,*,#452510,.T.); +#452510 = EDGE_CURVE('',#452503,#452511,#452513,.T.); +#452511 = VERTEX_POINT('',#452512); +#452512 = CARTESIAN_POINT('',(149.432284,-155.425032,-7.5E-02)); +#452513 = LINE('',#452514,#452515); +#452514 = CARTESIAN_POINT('',(149.445845,-155.396122,-7.5E-02)); +#452515 = VECTOR('',#452516,1.); +#452516 = DIRECTION('',(-0.424676165072,-0.90534532352,0.)); +#452517 = ORIENTED_EDGE('',*,*,#452518,.T.); +#452518 = EDGE_CURVE('',#452511,#452519,#452521,.T.); +#452519 = VERTEX_POINT('',#452520); +#452520 = CARTESIAN_POINT('',(149.390276,-155.454007,-7.5E-02)); +#452521 = LINE('',#452522,#452523); +#452522 = CARTESIAN_POINT('',(149.432284,-155.425032,-7.5E-02)); +#452523 = VECTOR('',#452524,1.); +#452524 = DIRECTION('',(-0.823176466643,-0.567785615144,0.)); +#452525 = ORIENTED_EDGE('',*,*,#452526,.T.); +#452526 = EDGE_CURVE('',#452519,#452527,#452529,.T.); +#452527 = VERTEX_POINT('',#452528); +#452528 = CARTESIAN_POINT('',(149.334608,-155.475842,-7.5E-02)); +#452529 = LINE('',#452530,#452531); +#452530 = CARTESIAN_POINT('',(149.390276,-155.454007,-7.5E-02)); +#452531 = VECTOR('',#452532,1.); +#452532 = DIRECTION('',(-0.930948119822,-0.365151472953,0.)); +#452533 = ORIENTED_EDGE('',*,*,#452534,.T.); +#452534 = EDGE_CURVE('',#452527,#452535,#452537,.T.); +#452535 = VERTEX_POINT('',#452536); +#452536 = CARTESIAN_POINT('',(149.61995,-156.068206,-7.5E-02)); +#452537 = LINE('',#452538,#452539); +#452538 = CARTESIAN_POINT('',(149.334608,-155.475842,-7.5E-02)); +#452539 = VECTOR('',#452540,1.); +#452540 = DIRECTION('',(0.433975753215,-0.90092455046,0.)); +#452541 = ORIENTED_EDGE('',*,*,#452542,.T.); +#452542 = EDGE_CURVE('',#452535,#452543,#452545,.T.); +#452543 = VERTEX_POINT('',#452544); +#452544 = CARTESIAN_POINT('',(149.6478,-156.136935,-7.5E-02)); +#452545 = LINE('',#452546,#452547); +#452546 = CARTESIAN_POINT('',(149.61995,-156.068206,-7.5E-02)); +#452547 = VECTOR('',#452548,1.); +#452548 = DIRECTION('',(0.3755532933,-0.926800800545,0.)); +#452549 = ORIENTED_EDGE('',*,*,#452550,.T.); +#452550 = EDGE_CURVE('',#452543,#452551,#452553,.T.); +#452551 = VERTEX_POINT('',#452552); +#452552 = CARTESIAN_POINT('',(149.661698,-156.184601,-7.5E-02)); +#452553 = LINE('',#452554,#452555); +#452554 = CARTESIAN_POINT('',(149.6478,-156.136935,-7.5E-02)); +#452555 = VECTOR('',#452556,1.); +#452556 = DIRECTION('',(0.279914924743,-0.960024809526,0.)); +#452557 = ORIENTED_EDGE('',*,*,#452558,.T.); +#452558 = EDGE_CURVE('',#452551,#452559,#452561,.T.); +#452559 = VERTEX_POINT('',#452560); +#452560 = CARTESIAN_POINT('',(149.592349,-156.295325,-7.5E-02)); +#452561 = CIRCLE('',#452562,8.988221682296E-02); +#452562 = AXIS2_PLACEMENT_3D('',#452563,#452564,#452565); +#452563 = CARTESIAN_POINT('',(149.57470119105,-156.2071923287,-7.5E-02) + ); +#452564 = DIRECTION('',(0.,0.,-1.)); +#452565 = DIRECTION('',(0.967897900349,0.25134369795,0.)); +#452566 = ORIENTED_EDGE('',*,*,#452567,.T.); +#452567 = EDGE_CURVE('',#452559,#452568,#452570,.T.); +#452568 = VERTEX_POINT('',#452569); +#452569 = CARTESIAN_POINT('',(149.525843,-156.286521,-7.5E-02)); +#452570 = LINE('',#452571,#452572); +#452571 = CARTESIAN_POINT('',(149.592349,-156.295325,-7.5E-02)); +#452572 = VECTOR('',#452573,1.); +#452573 = DIRECTION('',(-0.991351401078,0.131234140304,0.)); +#452574 = ORIENTED_EDGE('',*,*,#452575,.T.); +#452575 = EDGE_CURVE('',#452568,#452576,#452578,.T.); +#452576 = VERTEX_POINT('',#452577); +#452577 = CARTESIAN_POINT('',(149.44242,-156.232143,-7.5E-02)); +#452578 = LINE('',#452579,#452580); +#452579 = CARTESIAN_POINT('',(149.525843,-156.286521,-7.5E-02)); +#452580 = VECTOR('',#452581,1.); +#452581 = DIRECTION('',(-0.837740627388,0.54606834849,0.)); +#452582 = ORIENTED_EDGE('',*,*,#452583,.T.); +#452583 = EDGE_CURVE('',#452576,#452584,#452586,.T.); +#452584 = VERTEX_POINT('',#452585); +#452585 = CARTESIAN_POINT('',(149.3659,-156.114607,-7.5E-02)); +#452586 = LINE('',#452587,#452588); +#452587 = CARTESIAN_POINT('',(149.44242,-156.232143,-7.5E-02)); +#452588 = VECTOR('',#452589,1.); +#452589 = DIRECTION('',(-0.54559771385,0.838047215043,0.)); +#452590 = ORIENTED_EDGE('',*,*,#452591,.T.); +#452591 = EDGE_CURVE('',#452584,#452592,#452594,.T.); +#452592 = VERTEX_POINT('',#452593); +#452593 = CARTESIAN_POINT('',(149.135889,-155.682407,-7.5E-02)); +#452594 = LINE('',#452595,#452596); +#452595 = CARTESIAN_POINT('',(149.3659,-156.114607,-7.5E-02)); +#452596 = VECTOR('',#452597,1.); +#452597 = DIRECTION('',(-0.469799843504,0.882772964608,0.)); +#452598 = ORIENTED_EDGE('',*,*,#452599,.T.); +#452599 = EDGE_CURVE('',#452592,#452600,#452602,.T.); +#452600 = VERTEX_POINT('',#452601); +#452601 = CARTESIAN_POINT('',(148.38289,-154.18521,-7.5E-02)); +#452602 = LINE('',#452603,#452604); +#452603 = CARTESIAN_POINT('',(149.135889,-155.682407,-7.5E-02)); +#452604 = VECTOR('',#452605,1.); +#452605 = DIRECTION('',(-0.449312977691,0.893374416512,0.)); +#452606 = ORIENTED_EDGE('',*,*,#452607,.T.); +#452607 = EDGE_CURVE('',#452600,#452608,#452610,.T.); +#452608 = VERTEX_POINT('',#452609); +#452609 = CARTESIAN_POINT('',(148.110057,-153.669843,-7.5E-02)); +#452610 = LINE('',#452611,#452612); +#452611 = CARTESIAN_POINT('',(148.38289,-154.18521,-7.5E-02)); +#452612 = VECTOR('',#452613,1.); +#452613 = DIRECTION('',(-0.467876531932,0.883793839573,0.)); +#452614 = ORIENTED_EDGE('',*,*,#452615,.T.); +#452615 = EDGE_CURVE('',#452608,#452616,#452618,.T.); +#452616 = VERTEX_POINT('',#452617); +#452617 = CARTESIAN_POINT('',(147.982561,-153.452516,-7.5E-02)); +#452618 = LINE('',#452619,#452620); +#452619 = CARTESIAN_POINT('',(148.110057,-153.669843,-7.5E-02)); +#452620 = VECTOR('',#452621,1.); +#452621 = DIRECTION('',(-0.5060072102,0.862529247751,0.)); +#452622 = ORIENTED_EDGE('',*,*,#452623,.T.); +#452623 = EDGE_CURVE('',#452616,#452624,#452626,.T.); +#452624 = VERTEX_POINT('',#452625); +#452625 = CARTESIAN_POINT('',(147.884882,-153.311807,-7.5E-02)); +#452626 = LINE('',#452627,#452628); +#452627 = CARTESIAN_POINT('',(147.982561,-153.452516,-7.5E-02)); +#452628 = VECTOR('',#452629,1.); +#452629 = DIRECTION('',(-0.570255651335,0.821467280006,0.)); +#452630 = ORIENTED_EDGE('',*,*,#452631,.T.); +#452631 = EDGE_CURVE('',#452624,#452632,#452634,.T.); +#452632 = VERTEX_POINT('',#452633); +#452633 = CARTESIAN_POINT('',(147.805277,-153.226817,-7.5E-02)); +#452634 = LINE('',#452635,#452636); +#452635 = CARTESIAN_POINT('',(147.884882,-153.311807,-7.5E-02)); +#452636 = VECTOR('',#452637,1.); +#452637 = DIRECTION('',(-0.68360684143,0.729850454785,0.)); +#452638 = ORIENTED_EDGE('',*,*,#452639,.T.); +#452639 = EDGE_CURVE('',#452632,#452640,#452642,.T.); +#452640 = VERTEX_POINT('',#452641); +#452641 = CARTESIAN_POINT('',(147.717029,-153.167752,-7.5E-02)); +#452642 = LINE('',#452643,#452644); +#452643 = CARTESIAN_POINT('',(147.805277,-153.226817,-7.5E-02)); +#452644 = VECTOR('',#452645,1.); +#452645 = DIRECTION('',(-0.831036212169,0.55621831511,0.)); +#452646 = ORIENTED_EDGE('',*,*,#452647,.T.); +#452647 = EDGE_CURVE('',#452640,#452648,#452650,.T.); +#452648 = VERTEX_POINT('',#452649); +#452649 = CARTESIAN_POINT('',(147.542565,-153.082918,-7.5E-02)); +#452650 = LINE('',#452651,#452652); +#452651 = CARTESIAN_POINT('',(147.717029,-153.167752,-7.5E-02)); +#452652 = VECTOR('',#452653,1.); +#452653 = DIRECTION('',(-0.899316952102,0.437297404133,0.)); +#452654 = ORIENTED_EDGE('',*,*,#452655,.T.); +#452655 = EDGE_CURVE('',#452648,#452656,#452658,.T.); +#452656 = VERTEX_POINT('',#452657); +#452657 = CARTESIAN_POINT('',(147.434047,-153.043564,-7.5E-02)); +#452658 = LINE('',#452659,#452660); +#452659 = CARTESIAN_POINT('',(147.542565,-153.082918,-7.5E-02)); +#452660 = VECTOR('',#452661,1.); +#452661 = DIRECTION('',(-0.940091022773,0.340923552869,0.)); +#452662 = ORIENTED_EDGE('',*,*,#452663,.T.); +#452663 = EDGE_CURVE('',#452656,#452664,#452666,.T.); +#452664 = VERTEX_POINT('',#452665); +#452665 = CARTESIAN_POINT('',(147.37497,-153.03178,-7.5E-02)); +#452666 = LINE('',#452667,#452668); +#452667 = CARTESIAN_POINT('',(147.434047,-153.043564,-7.5E-02)); +#452668 = VECTOR('',#452669,1.); +#452669 = DIRECTION('',(-0.980680786332,0.195614915892,0.)); +#452670 = ORIENTED_EDGE('',*,*,#452671,.T.); +#452671 = EDGE_CURVE('',#452664,#452672,#452674,.T.); +#452672 = VERTEX_POINT('',#452673); +#452673 = CARTESIAN_POINT('',(147.205182,-153.022181,-7.5E-02)); +#452674 = LINE('',#452675,#452676); +#452675 = CARTESIAN_POINT('',(147.37497,-153.03178,-7.5E-02)); +#452676 = VECTOR('',#452677,1.); +#452677 = DIRECTION('',(-0.998405705875,5.64450748622E-02,0.)); +#452678 = ORIENTED_EDGE('',*,*,#452679,.T.); +#452679 = EDGE_CURVE('',#452672,#452680,#452682,.T.); +#452680 = VERTEX_POINT('',#452681); +#452681 = CARTESIAN_POINT('',(146.908776,-153.023139,-7.5E-02)); +#452682 = LINE('',#452683,#452684); +#452683 = CARTESIAN_POINT('',(147.205182,-153.022181,-7.5E-02)); +#452684 = VECTOR('',#452685,1.); +#452685 = DIRECTION('',(-0.999994776957,-3.232036451089E-03,0.)); +#452686 = ORIENTED_EDGE('',*,*,#452687,.T.); +#452687 = EDGE_CURVE('',#452680,#452688,#452690,.T.); +#452688 = VERTEX_POINT('',#452689); +#452689 = CARTESIAN_POINT('',(146.810884,-153.027957,-7.5E-02)); +#452690 = LINE('',#452691,#452692); +#452691 = CARTESIAN_POINT('',(146.908776,-153.023139,-7.5E-02)); +#452692 = VECTOR('',#452693,1.); +#452693 = DIRECTION('',(-0.998791014609,-4.915800176096E-02,0.)); +#452694 = ORIENTED_EDGE('',*,*,#452695,.T.); +#452695 = EDGE_CURVE('',#452688,#452696,#452698,.T.); +#452696 = VERTEX_POINT('',#452697); +#452697 = CARTESIAN_POINT('',(146.733605,-153.037299,-7.5E-02)); +#452698 = LINE('',#452699,#452700); +#452699 = CARTESIAN_POINT('',(146.810884,-153.027957,-7.5E-02)); +#452700 = VECTOR('',#452701,1.); +#452701 = DIRECTION('',(-0.992772328889,-0.120012928435,0.)); +#452702 = ORIENTED_EDGE('',*,*,#452703,.T.); +#452703 = EDGE_CURVE('',#452696,#452704,#452706,.T.); +#452704 = VERTEX_POINT('',#452705); +#452705 = CARTESIAN_POINT('',(146.665366,-153.052451,-7.5E-02)); +#452706 = LINE('',#452707,#452708); +#452707 = CARTESIAN_POINT('',(146.733605,-153.037299,-7.5E-02)); +#452708 = VECTOR('',#452709,1.); +#452709 = DIRECTION('',(-0.976224073142,-0.216763832358,0.)); +#452710 = ORIENTED_EDGE('',*,*,#452711,.T.); +#452711 = EDGE_CURVE('',#452704,#452712,#452714,.T.); +#452712 = VERTEX_POINT('',#452713); +#452713 = CARTESIAN_POINT('',(146.553234,-153.089748,-7.5E-02)); +#452714 = LINE('',#452715,#452716); +#452715 = CARTESIAN_POINT('',(146.665366,-153.052451,-7.5E-02)); +#452716 = VECTOR('',#452717,1.); +#452717 = DIRECTION('',(-0.948887040565,-0.315615880854,0.)); +#452718 = ORIENTED_EDGE('',*,*,#452719,.T.); +#452719 = EDGE_CURVE('',#452712,#452720,#452722,.T.); +#452720 = VERTEX_POINT('',#452721); +#452721 = CARTESIAN_POINT('',(146.364833,-153.182319,-7.5E-02)); +#452722 = LINE('',#452723,#452724); +#452723 = CARTESIAN_POINT('',(146.553234,-153.089748,-7.5E-02)); +#452724 = VECTOR('',#452725,1.); +#452725 = DIRECTION('',(-0.897510697486,-0.44099268463,0.)); +#452726 = ORIENTED_EDGE('',*,*,#452727,.T.); +#452727 = EDGE_CURVE('',#452720,#452728,#452730,.T.); +#452728 = VERTEX_POINT('',#452729); +#452729 = CARTESIAN_POINT('',(146.21253,-153.302843,-7.5E-02)); +#452730 = LINE('',#452731,#452732); +#452731 = CARTESIAN_POINT('',(146.364833,-153.182319,-7.5E-02)); +#452732 = VECTOR('',#452733,1.); +#452733 = DIRECTION('',(-0.78416910959,-0.620547183996,0.)); +#452734 = ORIENTED_EDGE('',*,*,#452735,.T.); +#452735 = EDGE_CURVE('',#452728,#452736,#452738,.T.); +#452736 = VERTEX_POINT('',#452737); +#452737 = CARTESIAN_POINT('',(146.094867,-153.453094,-7.5E-02)); +#452738 = LINE('',#452739,#452740); +#452739 = CARTESIAN_POINT('',(146.21253,-153.302843,-7.5E-02)); +#452740 = VECTOR('',#452741,1.); +#452741 = DIRECTION('',(-0.616552803653,-0.787313559077,0.)); +#452742 = ORIENTED_EDGE('',*,*,#452743,.T.); +#452743 = EDGE_CURVE('',#452736,#452744,#452746,.T.); +#452744 = VERTEX_POINT('',#452745); +#452745 = CARTESIAN_POINT('',(146.01039,-153.634843,-7.5E-02)); +#452746 = LINE('',#452747,#452748); +#452747 = CARTESIAN_POINT('',(146.094867,-153.453094,-7.5E-02)); +#452748 = VECTOR('',#452749,1.); +#452749 = DIRECTION('',(-0.421495201143,-0.906830632154,0.)); +#452750 = ORIENTED_EDGE('',*,*,#452751,.T.); +#452751 = EDGE_CURVE('',#452744,#452752,#452754,.T.); +#452752 = VERTEX_POINT('',#452753); +#452753 = CARTESIAN_POINT('',(145.95764,-153.849864,-7.5E-02)); +#452754 = LINE('',#452755,#452756); +#452755 = CARTESIAN_POINT('',(146.01039,-153.634843,-7.5E-02)); +#452756 = VECTOR('',#452757,1.); +#452757 = DIRECTION('',(-0.238259871663,-0.971201438197,0.)); +#452758 = ORIENTED_EDGE('',*,*,#452759,.T.); +#452759 = EDGE_CURVE('',#452752,#452760,#452762,.T.); +#452760 = VERTEX_POINT('',#452761); +#452761 = CARTESIAN_POINT('',(145.943573,-153.937285,-7.5E-02)); +#452762 = LINE('',#452763,#452764); +#452763 = CARTESIAN_POINT('',(145.95764,-153.849864,-7.5E-02)); +#452764 = VECTOR('',#452765,1.); +#452765 = DIRECTION('',(-0.158867412507,-0.987299926691,0.)); +#452766 = ORIENTED_EDGE('',*,*,#452767,.T.); +#452767 = EDGE_CURVE('',#452760,#452768,#452770,.T.); +#452768 = VERTEX_POINT('',#452769); +#452769 = CARTESIAN_POINT('',(146.561222,-153.636355,-7.5E-02)); +#452770 = LINE('',#452771,#452772); +#452771 = CARTESIAN_POINT('',(145.943573,-153.937285,-7.5E-02)); +#452772 = VECTOR('',#452773,1.); +#452773 = DIRECTION('',(0.898976070714,0.437997744609,0.)); +#452774 = ORIENTED_EDGE('',*,*,#452775,.T.); +#452775 = EDGE_CURVE('',#452768,#452776,#452778,.T.); +#452776 = VERTEX_POINT('',#452777); +#452777 = CARTESIAN_POINT('',(146.721112,-153.566258,-7.5E-02)); +#452778 = LINE('',#452779,#452780); +#452779 = CARTESIAN_POINT('',(146.561222,-153.636355,-7.5E-02)); +#452780 = VECTOR('',#452781,1.); +#452781 = DIRECTION('',(0.915851813134,0.401516445964,0.)); +#452782 = ORIENTED_EDGE('',*,*,#452783,.T.); +#452783 = EDGE_CURVE('',#452776,#452784,#452786,.T.); +#452784 = VERTEX_POINT('',#452785); +#452785 = CARTESIAN_POINT('',(146.852512,-153.515133,-7.5E-02)); +#452786 = LINE('',#452787,#452788); +#452787 = CARTESIAN_POINT('',(146.721112,-153.566258,-7.5E-02)); +#452788 = VECTOR('',#452789,1.); +#452789 = DIRECTION('',(0.931944762993,0.362600274034,0.)); +#452790 = ORIENTED_EDGE('',*,*,#452791,.T.); +#452791 = EDGE_CURVE('',#452784,#452792,#452794,.T.); +#452792 = VERTEX_POINT('',#452793); +#452793 = CARTESIAN_POINT('',(146.949774,-153.485341,-7.5E-02)); +#452794 = LINE('',#452795,#452796); +#452795 = CARTESIAN_POINT('',(146.852512,-153.515133,-7.5E-02)); +#452796 = VECTOR('',#452797,1.); +#452797 = DIRECTION('',(0.956150638849,0.292875324717,0.)); +#452798 = ORIENTED_EDGE('',*,*,#452799,.T.); +#452799 = EDGE_CURVE('',#452792,#452800,#452802,.T.); +#452800 = VERTEX_POINT('',#452801); +#452801 = CARTESIAN_POINT('',(147.667916,-153.319331,-7.5E-02)); +#452802 = LINE('',#452803,#452804); +#452803 = CARTESIAN_POINT('',(146.949774,-153.485341,-7.5E-02)); +#452804 = VECTOR('',#452805,1.); +#452805 = DIRECTION('',(0.974306431634,0.225226502162,0.)); +#452806 = ORIENTED_EDGE('',*,*,#452807,.T.); +#452807 = EDGE_CURVE('',#452800,#452808,#452810,.T.); +#452808 = VERTEX_POINT('',#452809); +#452809 = CARTESIAN_POINT('',(147.691519,-153.322734,-7.5E-02)); +#452810 = LINE('',#452811,#452812); +#452811 = CARTESIAN_POINT('',(147.667916,-153.319331,-7.5E-02)); +#452812 = VECTOR('',#452813,1.); +#452813 = DIRECTION('',(0.989765834571,-0.142701060672,0.)); +#452814 = ORIENTED_EDGE('',*,*,#452815,.T.); +#452815 = EDGE_CURVE('',#452808,#452816,#452818,.T.); +#452816 = VERTEX_POINT('',#452817); +#452817 = CARTESIAN_POINT('',(147.714376,-153.341302,-7.5E-02)); +#452818 = LINE('',#452819,#452820); +#452819 = CARTESIAN_POINT('',(147.691519,-153.322734,-7.5E-02)); +#452820 = VECTOR('',#452821,1.); +#452821 = DIRECTION('',(0.776169048434,-0.630524867276,0.)); +#452822 = ORIENTED_EDGE('',*,*,#452823,.T.); +#452823 = EDGE_CURVE('',#452816,#452824,#452826,.T.); +#452824 = VERTEX_POINT('',#452825); +#452825 = CARTESIAN_POINT('',(147.739743,-153.380729,-7.5E-02)); +#452826 = LINE('',#452827,#452828); +#452827 = CARTESIAN_POINT('',(147.714376,-153.341302,-7.5E-02)); +#452828 = VECTOR('',#452829,1.); +#452829 = DIRECTION('',(0.541075576087,-0.840973971632,0.)); +#452830 = ORIENTED_EDGE('',*,*,#452831,.T.); +#452831 = EDGE_CURVE('',#452824,#452832,#452834,.T.); +#452832 = VERTEX_POINT('',#452833); +#452833 = CARTESIAN_POINT('',(147.811039,-153.54492,-7.5E-02)); +#452834 = LINE('',#452835,#452836); +#452835 = CARTESIAN_POINT('',(147.739743,-153.380729,-7.5E-02)); +#452836 = VECTOR('',#452837,1.); +#452837 = DIRECTION('',(0.398296678207,-0.917256646817,0.)); +#452838 = ORIENTED_EDGE('',*,*,#452839,.T.); +#452839 = EDGE_CURVE('',#452832,#452840,#452842,.T.); +#452840 = VERTEX_POINT('',#452841); +#452841 = CARTESIAN_POINT('',(147.90252,-153.783397,-7.5E-02)); +#452842 = LINE('',#452843,#452844); +#452843 = CARTESIAN_POINT('',(147.811039,-153.54492,-7.5E-02)); +#452844 = VECTOR('',#452845,1.); +#452845 = DIRECTION('',(0.35815725356,-0.933661277832,0.)); +#452846 = ORIENTED_EDGE('',*,*,#452847,.T.); +#452847 = EDGE_CURVE('',#452840,#452848,#452850,.T.); +#452848 = VERTEX_POINT('',#452849); +#452849 = CARTESIAN_POINT('',(147.938301,-153.875777,-7.5E-02)); +#452850 = LINE('',#452851,#452852); +#452851 = CARTESIAN_POINT('',(147.90252,-153.783397,-7.5E-02)); +#452852 = VECTOR('',#452853,1.); +#452853 = DIRECTION('',(0.361178448313,-0.932496717675,0.)); +#452854 = ORIENTED_EDGE('',*,*,#452855,.T.); +#452855 = EDGE_CURVE('',#452848,#452856,#452858,.T.); +#452856 = VERTEX_POINT('',#452857); +#452857 = CARTESIAN_POINT('',(147.935789,-153.885338,-7.5E-02)); +#452858 = LINE('',#452859,#452860); +#452859 = CARTESIAN_POINT('',(147.938301,-153.875777,-7.5E-02)); +#452860 = VECTOR('',#452861,1.); +#452861 = DIRECTION('',(-0.25410987326,-0.967175357581,0.)); +#452862 = ORIENTED_EDGE('',*,*,#452863,.T.); +#452863 = EDGE_CURVE('',#452856,#452864,#452866,.T.); +#452864 = VERTEX_POINT('',#452865); +#452865 = CARTESIAN_POINT('',(147.893676,-153.878103,-7.5E-02)); +#452866 = LINE('',#452867,#452868); +#452867 = CARTESIAN_POINT('',(147.935789,-153.885338,-7.5E-02)); +#452868 = VECTOR('',#452869,1.); +#452869 = DIRECTION('',(-0.985561280441,0.169319114382,0.)); +#452870 = ORIENTED_EDGE('',*,*,#452871,.T.); +#452871 = EDGE_CURVE('',#452864,#452872,#452874,.T.); +#452872 = VERTEX_POINT('',#452873); +#452873 = CARTESIAN_POINT('',(147.82627,-153.874941,-7.5E-02)); +#452874 = LINE('',#452875,#452876); +#452875 = CARTESIAN_POINT('',(147.893676,-153.878103,-7.5E-02)); +#452876 = VECTOR('',#452877,1.); +#452877 = DIRECTION('',(-0.998901549255,4.685824257107E-02,0.)); +#452878 = ORIENTED_EDGE('',*,*,#452879,.T.); +#452879 = EDGE_CURVE('',#452872,#452880,#452882,.T.); +#452880 = VERTEX_POINT('',#452881); +#452881 = CARTESIAN_POINT('',(147.723556,-153.882455,-7.5E-02)); +#452882 = LINE('',#452883,#452884); +#452883 = CARTESIAN_POINT('',(147.82627,-153.874941,-7.5E-02)); +#452884 = VECTOR('',#452885,1.); +#452885 = DIRECTION('',(-0.997334895536,-7.295961996463E-02,0.)); +#452886 = ORIENTED_EDGE('',*,*,#452887,.T.); +#452887 = EDGE_CURVE('',#452880,#452888,#452890,.T.); +#452888 = VERTEX_POINT('',#452889); +#452889 = CARTESIAN_POINT('',(147.440393,-153.924258,-7.5E-02)); +#452890 = LINE('',#452891,#452892); +#452891 = CARTESIAN_POINT('',(147.723556,-153.882455,-7.5E-02)); +#452892 = VECTOR('',#452893,1.); +#452893 = DIRECTION('',(-0.989277822413,-0.146045849247,0.)); +#452894 = ORIENTED_EDGE('',*,*,#452895,.T.); +#452895 = EDGE_CURVE('',#452888,#452896,#452898,.T.); +#452896 = VERTEX_POINT('',#452897); +#452897 = CARTESIAN_POINT('',(147.100572,-153.993002,-7.5E-02)); +#452898 = LINE('',#452899,#452900); +#452899 = CARTESIAN_POINT('',(147.440393,-153.924258,-7.5E-02)); +#452900 = VECTOR('',#452901,1.); +#452901 = DIRECTION('',(-0.980145756718,-0.19827832859,0.)); +#452902 = ORIENTED_EDGE('',*,*,#452903,.T.); +#452903 = EDGE_CURVE('',#452896,#452904,#452906,.T.); +#452904 = VERTEX_POINT('',#452905); +#452905 = CARTESIAN_POINT('',(146.760478,-154.07818,-7.5E-02)); +#452906 = LINE('',#452907,#452908); +#452907 = CARTESIAN_POINT('',(147.100572,-153.993002,-7.5E-02)); +#452908 = VECTOR('',#452909,1.); +#452909 = DIRECTION('',(-0.970038723212,-0.242950355977,0.)); +#452910 = ORIENTED_EDGE('',*,*,#452911,.T.); +#452911 = EDGE_CURVE('',#452904,#452912,#452914,.T.); +#452912 = VERTEX_POINT('',#452913); +#452913 = CARTESIAN_POINT('',(146.485103,-154.165057,-7.5E-02)); +#452914 = LINE('',#452915,#452916); +#452915 = CARTESIAN_POINT('',(146.760478,-154.07818,-7.5E-02)); +#452916 = VECTOR('',#452917,1.); +#452917 = DIRECTION('',(-0.953665692183,-0.300868322614,0.)); +#452918 = ORIENTED_EDGE('',*,*,#452919,.T.); +#452919 = EDGE_CURVE('',#452912,#452920,#452922,.T.); +#452920 = VERTEX_POINT('',#452921); +#452921 = CARTESIAN_POINT('',(146.072243,-154.32302,-7.5E-02)); +#452922 = LINE('',#452923,#452924); +#452923 = CARTESIAN_POINT('',(146.485103,-154.165057,-7.5E-02)); +#452924 = VECTOR('',#452925,1.); +#452925 = DIRECTION('',(-0.933972752697,-0.357344227908,0.)); +#452926 = ORIENTED_EDGE('',*,*,#452927,.T.); +#452927 = EDGE_CURVE('',#452920,#452928,#452930,.T.); +#452928 = VERTEX_POINT('',#452929); +#452929 = CARTESIAN_POINT('',(145.657467,-154.502473,-7.5E-02)); +#452930 = LINE('',#452931,#452932); +#452931 = CARTESIAN_POINT('',(146.072243,-154.32302,-7.5E-02)); +#452932 = VECTOR('',#452933,1.); +#452933 = DIRECTION('',(-0.917784143625,-0.397079671741,0.)); +#452934 = ORIENTED_EDGE('',*,*,#452935,.T.); +#452935 = EDGE_CURVE('',#452928,#452936,#452938,.T.); +#452936 = VERTEX_POINT('',#452937); +#452937 = CARTESIAN_POINT('',(145.311526,-154.67065,-7.5E-02)); +#452938 = LINE('',#452939,#452940); +#452939 = CARTESIAN_POINT('',(145.657467,-154.502473,-7.5E-02)); +#452940 = VECTOR('',#452941,1.); +#452941 = DIRECTION('',(-0.899356368165,-0.437216334372,0.)); +#452942 = ORIENTED_EDGE('',*,*,#452943,.T.); +#452943 = EDGE_CURVE('',#452936,#452944,#452946,.T.); +#452944 = VERTEX_POINT('',#452945); +#452945 = CARTESIAN_POINT('',(145.215612,-154.711836,-7.5E-02)); +#452946 = LINE('',#452947,#452948); +#452947 = CARTESIAN_POINT('',(145.311526,-154.67065,-7.5E-02)); +#452948 = VECTOR('',#452949,1.); +#452949 = DIRECTION('',(-0.918867308927,-0.394566684587,0.)); +#452950 = ORIENTED_EDGE('',*,*,#452951,.T.); +#452951 = EDGE_CURVE('',#452944,#452952,#452954,.T.); +#452952 = VERTEX_POINT('',#452953); +#452953 = CARTESIAN_POINT('',(145.158313,-154.728959,-7.5E-02)); +#452954 = LINE('',#452955,#452956); +#452955 = CARTESIAN_POINT('',(145.215612,-154.711836,-7.5E-02)); +#452956 = VECTOR('',#452957,1.); +#452957 = DIRECTION('',(-0.958132710979,-0.286324480533,0.)); +#452958 = ORIENTED_EDGE('',*,*,#452959,.T.); +#452959 = EDGE_CURVE('',#452952,#452960,#452962,.T.); +#452960 = VERTEX_POINT('',#452961); +#452961 = CARTESIAN_POINT('',(145.139289,-154.722154,-7.5E-02)); +#452962 = LINE('',#452963,#452964); +#452963 = CARTESIAN_POINT('',(145.158313,-154.728959,-7.5E-02)); +#452964 = VECTOR('',#452965,1.); +#452965 = DIRECTION('',(-0.941573828101,0.336806660021,0.)); +#452966 = ORIENTED_EDGE('',*,*,#452967,.T.); +#452967 = EDGE_CURVE('',#452960,#452968,#452970,.T.); +#452968 = VERTEX_POINT('',#452969); +#452969 = CARTESIAN_POINT('',(145.138825,-154.716883,-7.5E-02)); +#452970 = LINE('',#452971,#452972); +#452971 = CARTESIAN_POINT('',(145.139289,-154.722154,-7.5E-02)); +#452972 = VECTOR('',#452973,1.); +#452973 = DIRECTION('',(-8.76897354761E-02,0.996147835561,0.)); +#452974 = ORIENTED_EDGE('',*,*,#452975,.T.); +#452975 = EDGE_CURVE('',#452968,#452976,#452978,.T.); +#452976 = VERTEX_POINT('',#452977); +#452977 = CARTESIAN_POINT('',(145.117875,-154.700861,-7.5E-02)); +#452978 = LINE('',#452979,#452980); +#452979 = CARTESIAN_POINT('',(145.138825,-154.716883,-7.5E-02)); +#452980 = VECTOR('',#452981,1.); +#452981 = DIRECTION('',(-0.794332003286,0.607483883372,0.)); +#452982 = ORIENTED_EDGE('',*,*,#452983,.T.); +#452983 = EDGE_CURVE('',#452976,#452984,#452986,.T.); +#452984 = VERTEX_POINT('',#452985); +#452985 = CARTESIAN_POINT('',(145.07357,-154.71159,-7.5E-02)); +#452986 = LINE('',#452987,#452988); +#452987 = CARTESIAN_POINT('',(145.117875,-154.700861,-7.5E-02)); +#452988 = VECTOR('',#452989,1.); +#452989 = DIRECTION('',(-0.971908371037,-0.235359551131,0.)); +#452990 = ORIENTED_EDGE('',*,*,#452991,.T.); +#452991 = EDGE_CURVE('',#452984,#452992,#452994,.T.); +#452992 = VERTEX_POINT('',#452993); +#452993 = CARTESIAN_POINT('',(144.969301,-154.774416,-7.5E-02)); +#452994 = LINE('',#452995,#452996); +#452995 = CARTESIAN_POINT('',(145.07357,-154.71159,-7.5E-02)); +#452996 = VECTOR('',#452997,1.); +#452997 = DIRECTION('',(-0.856532497647,-0.516093092838,0.)); +#452998 = ORIENTED_EDGE('',*,*,#452999,.T.); +#452999 = EDGE_CURVE('',#452992,#453000,#453002,.T.); +#453000 = VERTEX_POINT('',#453001); +#453001 = CARTESIAN_POINT('',(144.943108,-154.77066,-7.5E-02)); +#453002 = LINE('',#453003,#453004); +#453003 = CARTESIAN_POINT('',(144.969301,-154.774416,-7.5E-02)); +#453004 = VECTOR('',#453005,1.); +#453005 = DIRECTION('',(-0.989874527786,0.141945127567,0.)); +#453006 = ORIENTED_EDGE('',*,*,#453007,.T.); +#453007 = EDGE_CURVE('',#453000,#453008,#453010,.T.); +#453008 = VERTEX_POINT('',#453009); +#453009 = CARTESIAN_POINT('',(144.945954,-154.75644,-7.5E-02)); +#453010 = LINE('',#453011,#453012); +#453011 = CARTESIAN_POINT('',(144.943108,-154.77066,-7.5E-02)); +#453012 = VECTOR('',#453013,1.); +#453013 = DIRECTION('',(0.196248741014,0.980554145191,0.)); +#453014 = ORIENTED_EDGE('',*,*,#453015,.T.); +#453015 = EDGE_CURVE('',#453008,#453016,#453018,.T.); +#453016 = VERTEX_POINT('',#453017); +#453017 = CARTESIAN_POINT('',(144.978965,-154.719251,-7.5E-02)); +#453018 = LINE('',#453019,#453020); +#453019 = CARTESIAN_POINT('',(144.945954,-154.75644,-7.5E-02)); +#453020 = VECTOR('',#453021,1.); +#453021 = DIRECTION('',(0.663848173714,0.747867369429,0.)); +#453022 = ORIENTED_EDGE('',*,*,#453023,.T.); +#453023 = EDGE_CURVE('',#453016,#453024,#453026,.T.); +#453024 = VERTEX_POINT('',#453025); +#453025 = CARTESIAN_POINT('',(145.121917,-154.606952,-7.5E-02)); +#453026 = LINE('',#453027,#453028); +#453027 = CARTESIAN_POINT('',(144.978965,-154.719251,-7.5E-02)); +#453028 = VECTOR('',#453029,1.); +#453029 = DIRECTION('',(0.786372928855,0.61775206739,0.)); +#453030 = ORIENTED_EDGE('',*,*,#453031,.T.); +#453031 = EDGE_CURVE('',#453024,#453032,#453034,.T.); +#453032 = VERTEX_POINT('',#453033); +#453033 = CARTESIAN_POINT('',(145.319319,-154.479177,-7.5E-02)); +#453034 = LINE('',#453035,#453036); +#453035 = CARTESIAN_POINT('',(145.121917,-154.606952,-7.5E-02)); +#453036 = VECTOR('',#453037,1.); +#453037 = DIRECTION('',(0.839484232483,0.543384047809,0.)); +#453038 = ORIENTED_EDGE('',*,*,#453039,.T.); +#453039 = EDGE_CURVE('',#453032,#453040,#453042,.T.); +#453040 = VERTEX_POINT('',#453041); +#453041 = CARTESIAN_POINT('',(145.528384,-154.360355,-7.5E-02)); +#453042 = LINE('',#453043,#453044); +#453043 = CARTESIAN_POINT('',(145.319319,-154.479177,-7.5E-02)); +#453044 = VECTOR('',#453045,1.); +#453045 = DIRECTION('',(0.869393913307,0.494119644929,0.)); +#453046 = ORIENTED_EDGE('',*,*,#453047,.T.); +#453047 = EDGE_CURVE('',#453040,#453048,#453050,.T.); +#453048 = VERTEX_POINT('',#453049); +#453049 = CARTESIAN_POINT('',(145.58535,-154.320439,-7.5E-02)); +#453050 = LINE('',#453051,#453052); +#453051 = CARTESIAN_POINT('',(145.528384,-154.360355,-7.5E-02)); +#453052 = VECTOR('',#453053,1.); +#453053 = DIRECTION('',(0.818963021761,0.57384629387,0.)); +#453054 = ORIENTED_EDGE('',*,*,#453055,.T.); +#453055 = EDGE_CURVE('',#453048,#453056,#453058,.T.); +#453056 = VERTEX_POINT('',#453057); +#453057 = CARTESIAN_POINT('',(145.613769,-154.286474,-7.5E-02)); +#453058 = LINE('',#453059,#453060); +#453059 = CARTESIAN_POINT('',(145.58535,-154.320439,-7.5E-02)); +#453060 = VECTOR('',#453061,1.); +#453061 = DIRECTION('',(0.6417134168,0.76694451605,0.)); +#453062 = ORIENTED_EDGE('',*,*,#453063,.T.); +#453063 = EDGE_CURVE('',#453056,#453064,#453066,.T.); +#453064 = VERTEX_POINT('',#453065); +#453065 = CARTESIAN_POINT('',(145.610152,-154.267112,-7.5E-02)); +#453066 = LINE('',#453067,#453068); +#453067 = CARTESIAN_POINT('',(145.613769,-154.286474,-7.5E-02)); +#453068 = VECTOR('',#453069,1.); +#453069 = DIRECTION('',(-0.183632516482,0.982994963818,0.)); +#453070 = ORIENTED_EDGE('',*,*,#453071,.T.); +#453071 = EDGE_CURVE('',#453064,#453072,#453074,.T.); +#453072 = VERTEX_POINT('',#453073); +#453073 = CARTESIAN_POINT('',(145.558673,-154.277883,-7.5E-02)); +#453074 = LINE('',#453075,#453076); +#453075 = CARTESIAN_POINT('',(145.610152,-154.267112,-7.5E-02)); +#453076 = VECTOR('',#453077,1.); +#453077 = DIRECTION('',(-0.978804631999,-0.204796221591,0.)); +#453078 = ORIENTED_EDGE('',*,*,#453079,.T.); +#453079 = EDGE_CURVE('',#453072,#453080,#453082,.T.); +#453080 = VERTEX_POINT('',#453081); +#453081 = CARTESIAN_POINT('',(145.276052,-154.404777,-7.5E-02)); +#453082 = LINE('',#453083,#453084); +#453083 = CARTESIAN_POINT('',(145.558673,-154.277883,-7.5E-02)); +#453084 = VECTOR('',#453085,1.); +#453085 = DIRECTION('',(-0.912265989039,-0.409598297413,0.)); +#453086 = ORIENTED_EDGE('',*,*,#453087,.T.); +#453087 = EDGE_CURVE('',#453080,#453088,#453090,.T.); +#453088 = VERTEX_POINT('',#453089); +#453089 = CARTESIAN_POINT('',(144.959461,-154.568769,-7.5E-02)); +#453090 = LINE('',#453091,#453092); +#453091 = CARTESIAN_POINT('',(145.276052,-154.404777,-7.5E-02)); +#453092 = VECTOR('',#453093,1.); +#453093 = DIRECTION('',(-0.887945054152,-0.459949541587,0.)); +#453094 = ORIENTED_EDGE('',*,*,#453095,.T.); +#453095 = EDGE_CURVE('',#453088,#453096,#453098,.T.); +#453096 = VERTEX_POINT('',#453097); +#453097 = CARTESIAN_POINT('',(144.852658,-154.635278,-7.5E-02)); +#453098 = LINE('',#453099,#453100); +#453099 = CARTESIAN_POINT('',(144.959461,-154.568769,-7.5E-02)); +#453100 = VECTOR('',#453101,1.); +#453101 = DIRECTION('',(-0.848864744494,-0.528610107315,0.)); +#453102 = ORIENTED_EDGE('',*,*,#453103,.T.); +#453103 = EDGE_CURVE('',#453096,#453104,#453106,.T.); +#453104 = VERTEX_POINT('',#453105); +#453105 = CARTESIAN_POINT('',(144.80889,-154.657144,-7.5E-02)); +#453106 = LINE('',#453107,#453108); +#453107 = CARTESIAN_POINT('',(144.852658,-154.635278,-7.5E-02)); +#453108 = VECTOR('',#453109,1.); +#453109 = DIRECTION('',(-0.8945743034,-0.446919249637,0.)); +#453110 = ORIENTED_EDGE('',*,*,#453111,.T.); +#453111 = EDGE_CURVE('',#453104,#453112,#453114,.T.); +#453112 = VERTEX_POINT('',#453113); +#453113 = CARTESIAN_POINT('',(144.791979,-154.656536,-7.5E-02)); +#453114 = LINE('',#453115,#453116); +#453115 = CARTESIAN_POINT('',(144.80889,-154.657144,-7.5E-02)); +#453116 = VECTOR('',#453117,1.); +#453117 = DIRECTION('',(-0.999354319305,3.592971593266E-02,0.)); +#453118 = ORIENTED_EDGE('',*,*,#453119,.T.); +#453119 = EDGE_CURVE('',#453112,#453120,#453122,.T.); +#453120 = VERTEX_POINT('',#453121); +#453121 = CARTESIAN_POINT('',(144.794201,-154.648283,-7.5E-02)); +#453122 = LINE('',#453123,#453124); +#453123 = CARTESIAN_POINT('',(144.791979,-154.656536,-7.5E-02)); +#453124 = VECTOR('',#453125,1.); +#453125 = DIRECTION('',(0.259977669366,0.965614628841,0.)); +#453126 = ORIENTED_EDGE('',*,*,#453127,.T.); +#453127 = EDGE_CURVE('',#453120,#453128,#453130,.T.); +#453128 = VERTEX_POINT('',#453129); +#453129 = CARTESIAN_POINT('',(144.824958,-154.610551,-7.5E-02)); +#453130 = LINE('',#453131,#453132); +#453131 = CARTESIAN_POINT('',(144.794201,-154.648283,-7.5E-02)); +#453132 = VECTOR('',#453133,1.); +#453133 = DIRECTION('',(0.631826118587,0.775110157249,0.)); +#453134 = ORIENTED_EDGE('',*,*,#453135,.T.); +#453135 = EDGE_CURVE('',#453128,#453136,#453138,.T.); +#453136 = VERTEX_POINT('',#453137); +#453137 = CARTESIAN_POINT('',(144.886063,-154.557538,-7.5E-02)); +#453138 = LINE('',#453139,#453140); +#453139 = CARTESIAN_POINT('',(144.824958,-154.610551,-7.5E-02)); +#453140 = VECTOR('',#453141,1.); +#453141 = DIRECTION('',(0.755350451988,0.65532106229,0.)); +#453142 = ORIENTED_EDGE('',*,*,#453143,.T.); +#453143 = EDGE_CURVE('',#453136,#453144,#453146,.T.); +#453144 = VERTEX_POINT('',#453145); +#453145 = CARTESIAN_POINT('',(145.06957,-154.428313,-7.5E-02)); +#453146 = LINE('',#453147,#453148); +#453147 = CARTESIAN_POINT('',(144.886063,-154.557538,-7.5E-02)); +#453148 = VECTOR('',#453149,1.); +#453149 = DIRECTION('',(0.817616717448,0.575762888131,0.)); +#453150 = ORIENTED_EDGE('',*,*,#453151,.T.); +#453151 = EDGE_CURVE('',#453144,#453152,#453154,.T.); +#453152 = VERTEX_POINT('',#453153); +#453153 = CARTESIAN_POINT('',(145.329907,-154.270702,-7.5E-02)); +#453154 = LINE('',#453155,#453156); +#453155 = CARTESIAN_POINT('',(145.06957,-154.428313,-7.5E-02)); +#453156 = VECTOR('',#453157,1.); +#453157 = DIRECTION('',(0.855443880427,0.517895517879,0.)); +#453158 = ORIENTED_EDGE('',*,*,#453159,.T.); +#453159 = EDGE_CURVE('',#453152,#453160,#453162,.T.); +#453160 = VERTEX_POINT('',#453161); +#453161 = CARTESIAN_POINT('',(145.340557,-154.260254,-7.5E-02)); +#453162 = LINE('',#453163,#453164); +#453163 = CARTESIAN_POINT('',(145.329907,-154.270702,-7.5E-02)); +#453164 = VECTOR('',#453165,1.); +#453165 = DIRECTION('',(0.713844163422,0.700304583984,0.)); +#453166 = ORIENTED_EDGE('',*,*,#453167,.T.); +#453167 = EDGE_CURVE('',#453160,#453168,#453170,.T.); +#453168 = VERTEX_POINT('',#453169); +#453169 = CARTESIAN_POINT('',(145.274939,-154.284652,-7.5E-02)); +#453170 = LINE('',#453171,#453172); +#453171 = CARTESIAN_POINT('',(145.340557,-154.260254,-7.5E-02)); +#453172 = VECTOR('',#453173,1.); +#453173 = DIRECTION('',(-0.937305860197,-0.348507854203,0.)); +#453174 = ORIENTED_EDGE('',*,*,#453175,.T.); +#453175 = EDGE_CURVE('',#453168,#453176,#453178,.T.); +#453176 = VERTEX_POINT('',#453177); +#453177 = CARTESIAN_POINT('',(145.099561,-154.378265,-7.5E-02)); +#453178 = LINE('',#453179,#453180); +#453179 = CARTESIAN_POINT('',(145.274939,-154.284652,-7.5E-02)); +#453180 = VECTOR('',#453181,1.); +#453181 = DIRECTION('',(-0.882189832514,-0.470893936475,0.)); +#453182 = ORIENTED_EDGE('',*,*,#453183,.T.); +#453183 = EDGE_CURVE('',#453176,#453184,#453186,.T.); +#453184 = VERTEX_POINT('',#453185); +#453185 = CARTESIAN_POINT('',(144.762652,-154.582707,-7.5E-02)); +#453186 = LINE('',#453187,#453188); +#453187 = CARTESIAN_POINT('',(145.099561,-154.378265,-7.5E-02)); +#453188 = VECTOR('',#453189,1.); +#453189 = DIRECTION('',(-0.854911195322,-0.518774371103,0.)); +#453190 = ORIENTED_EDGE('',*,*,#453191,.T.); +#453191 = EDGE_CURVE('',#453184,#453192,#453194,.T.); +#453192 = VERTEX_POINT('',#453193); +#453193 = CARTESIAN_POINT('',(144.71833,-154.603716,-7.5E-02)); +#453194 = LINE('',#453195,#453196); +#453195 = CARTESIAN_POINT('',(144.762652,-154.582707,-7.5E-02)); +#453196 = VECTOR('',#453197,1.); +#453197 = DIRECTION('',(-0.903624475492,-0.428325585614,0.)); +#453198 = ORIENTED_EDGE('',*,*,#453199,.T.); +#453199 = EDGE_CURVE('',#453192,#453200,#453202,.T.); +#453200 = VERTEX_POINT('',#453201); +#453201 = CARTESIAN_POINT('',(144.704832,-154.602732,-7.5E-02)); +#453202 = LINE('',#453203,#453204); +#453203 = CARTESIAN_POINT('',(144.71833,-154.603716,-7.5E-02)); +#453204 = VECTOR('',#453205,1.); +#453205 = DIRECTION('',(-0.997353361924,7.270674974971E-02,0.)); +#453206 = ORIENTED_EDGE('',*,*,#453207,.T.); +#453207 = EDGE_CURVE('',#453200,#453208,#453210,.T.); +#453208 = VERTEX_POINT('',#453209); +#453209 = CARTESIAN_POINT('',(144.716273,-154.58511,-7.5E-02)); +#453210 = LINE('',#453211,#453212); +#453211 = CARTESIAN_POINT('',(144.704832,-154.602732,-7.5E-02)); +#453212 = VECTOR('',#453213,1.); +#453213 = DIRECTION('',(0.544543265881,0.838732753375,0.)); +#453214 = ORIENTED_EDGE('',*,*,#453215,.T.); +#453215 = EDGE_CURVE('',#453208,#453216,#453218,.T.); +#453216 = VERTEX_POINT('',#453217); +#453217 = CARTESIAN_POINT('',(144.765154,-154.541329,-7.5E-02)); +#453218 = LINE('',#453219,#453220); +#453219 = CARTESIAN_POINT('',(144.716273,-154.58511,-7.5E-02)); +#453220 = VECTOR('',#453221,1.); +#453221 = DIRECTION('',(0.744897657167,0.667178746924,0.)); +#453222 = ORIENTED_EDGE('',*,*,#453223,.T.); +#453223 = EDGE_CURVE('',#453216,#453224,#453226,.T.); +#453224 = VERTEX_POINT('',#453225); +#453225 = CARTESIAN_POINT('',(144.844409,-154.485064,-7.5E-02)); +#453226 = LINE('',#453227,#453228); +#453227 = CARTESIAN_POINT('',(144.765154,-154.541329,-7.5E-02)); +#453228 = VECTOR('',#453229,1.); +#453229 = DIRECTION('',(0.815412365995,0.578880534638,0.)); +#453230 = ORIENTED_EDGE('',*,*,#453231,.T.); +#453231 = EDGE_CURVE('',#453224,#453232,#453234,.T.); +#453232 = VERTEX_POINT('',#453233); +#453233 = CARTESIAN_POINT('',(145.064538,-154.353225,-7.5E-02)); +#453234 = LINE('',#453235,#453236); +#453235 = CARTESIAN_POINT('',(144.844409,-154.485064,-7.5E-02)); +#453236 = VECTOR('',#453237,1.); +#453237 = DIRECTION('',(0.857902554869,0.513812423312,0.)); +#453238 = ORIENTED_EDGE('',*,*,#453239,.T.); +#453239 = EDGE_CURVE('',#453232,#453240,#453242,.T.); +#453240 = VERTEX_POINT('',#453241); +#453241 = CARTESIAN_POINT('',(145.317647,-154.225883,-7.5E-02)); +#453242 = LINE('',#453243,#453244); +#453243 = CARTESIAN_POINT('',(145.064538,-154.353225,-7.5E-02)); +#453244 = VECTOR('',#453245,1.); +#453245 = DIRECTION('',(0.893312678977,0.449435710173,0.)); +#453246 = ORIENTED_EDGE('',*,*,#453247,.T.); +#453247 = EDGE_CURVE('',#453240,#453248,#453250,.T.); +#453248 = VERTEX_POINT('',#453249); +#453249 = CARTESIAN_POINT('',(145.590793,-154.102389,-7.5E-02)); +#453250 = LINE('',#453251,#453252); +#453251 = CARTESIAN_POINT('',(145.317647,-154.225883,-7.5E-02)); +#453252 = VECTOR('',#453253,1.); +#453253 = DIRECTION('',(0.911198158135,0.411968344185,0.)); +#453254 = ORIENTED_EDGE('',*,*,#453255,.T.); +#453255 = EDGE_CURVE('',#453248,#453256,#453258,.T.); +#453256 = VERTEX_POINT('',#453257); +#453257 = CARTESIAN_POINT('',(145.605556,-153.896527,-7.5E-02)); +#453258 = LINE('',#453259,#453260); +#453259 = CARTESIAN_POINT('',(145.590793,-154.102389,-7.5E-02)); +#453260 = VECTOR('',#453261,1.); +#453261 = DIRECTION('',(7.152939570726E-02,0.997438492114,0.)); +#453262 = ORIENTED_EDGE('',*,*,#453263,.T.); +#453263 = EDGE_CURVE('',#453256,#453264,#453266,.T.); +#453264 = VERTEX_POINT('',#453265); +#453265 = CARTESIAN_POINT('',(145.628412,-153.68219,-7.5E-02)); +#453266 = LINE('',#453267,#453268); +#453267 = CARTESIAN_POINT('',(145.605556,-153.896527,-7.5E-02)); +#453268 = VECTOR('',#453269,1.); +#453269 = DIRECTION('',(0.106034645605,0.994362435901,0.)); +#453270 = ORIENTED_EDGE('',*,*,#453271,.T.); +#453271 = EDGE_CURVE('',#453264,#453272,#453274,.T.); +#453272 = VERTEX_POINT('',#453273); +#453273 = CARTESIAN_POINT('',(145.672365,-153.467796,-7.5E-02)); +#453274 = LINE('',#453275,#453276); +#453275 = CARTESIAN_POINT('',(145.628412,-153.68219,-7.5E-02)); +#453276 = VECTOR('',#453277,1.); +#453277 = DIRECTION('',(0.200833398748,0.979625411036,0.)); +#453278 = ORIENTED_EDGE('',*,*,#453279,.T.); +#453279 = EDGE_CURVE('',#453272,#453280,#453282,.T.); +#453280 = VERTEX_POINT('',#453281); +#453281 = CARTESIAN_POINT('',(145.695268,-153.403324,-7.5E-02)); +#453282 = LINE('',#453283,#453284); +#453283 = CARTESIAN_POINT('',(145.672365,-153.467796,-7.5E-02)); +#453284 = VECTOR('',#453285,1.); +#453285 = DIRECTION('',(0.334745244019,0.942308665781,0.)); +#453286 = ORIENTED_EDGE('',*,*,#453287,.T.); +#453287 = EDGE_CURVE('',#453280,#453288,#453290,.T.); +#453288 = VERTEX_POINT('',#453289); +#453289 = CARTESIAN_POINT('',(145.716664,-153.42472,-7.5E-02)); +#453290 = LINE('',#453291,#453292); +#453291 = CARTESIAN_POINT('',(145.695268,-153.403324,-7.5E-02)); +#453292 = VECTOR('',#453293,1.); +#453293 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#453294 = ORIENTED_EDGE('',*,*,#453295,.T.); +#453295 = EDGE_CURVE('',#453288,#453296,#453298,.T.); +#453296 = VERTEX_POINT('',#453297); +#453297 = CARTESIAN_POINT('',(145.812847,-153.151265,-7.5E-02)); +#453298 = CIRCLE('',#453299,0.149698540175); +#453299 = AXIS2_PLACEMENT_3D('',#453300,#453301,#453302); +#453300 = CARTESIAN_POINT('',(145.80008322459,-153.3004184074,-7.5E-02) + ); +#453301 = DIRECTION('',(0.,0.,1.)); +#453302 = DIRECTION('',(-0.557248083349,-0.830346056535,0.)); +#453303 = ORIENTED_EDGE('',*,*,#453304,.T.); +#453304 = EDGE_CURVE('',#453296,#453305,#453307,.T.); +#453305 = VERTEX_POINT('',#453306); +#453306 = CARTESIAN_POINT('',(145.824347,-153.130856,-7.5E-02)); +#453307 = LINE('',#453308,#453309); +#453308 = CARTESIAN_POINT('',(145.812847,-153.151265,-7.5E-02)); +#453309 = VECTOR('',#453310,1.); +#453310 = DIRECTION('',(0.49090762585,0.871211629217,0.)); +#453311 = ORIENTED_EDGE('',*,*,#453312,.T.); +#453312 = EDGE_CURVE('',#453305,#453313,#453315,.T.); +#453313 = VERTEX_POINT('',#453314); +#453314 = CARTESIAN_POINT('',(146.19638,-152.810254,-7.5E-02)); +#453315 = CIRCLE('',#453316,0.989976483912); +#453316 = AXIS2_PLACEMENT_3D('',#453317,#453318,#453319); +#453317 = CARTESIAN_POINT('',(146.63642767633,-153.6970524445,-7.5E-02) + ); +#453318 = DIRECTION('',(0.,0.,-1.)); +#453319 = DIRECTION('',(-0.820302996623,0.571929185941,0.)); +#453320 = ORIENTED_EDGE('',*,*,#453321,.T.); +#453321 = EDGE_CURVE('',#453313,#452364,#453322,.T.); +#453322 = LINE('',#453323,#453324); +#453323 = CARTESIAN_POINT('',(146.19638,-152.810254,-7.5E-02)); +#453324 = VECTOR('',#453325,1.); +#453325 = DIRECTION('',(0.932325131272,0.361621140973,0.)); +#453326 = FACE_BOUND('',#453327,.T.); +#453327 = EDGE_LOOP('',(#453328,#453338,#453346,#453354)); +#453328 = ORIENTED_EDGE('',*,*,#453329,.T.); +#453329 = EDGE_CURVE('',#453330,#453332,#453334,.T.); +#453330 = VERTEX_POINT('',#453331); +#453331 = CARTESIAN_POINT('',(145.382407,-154.260254,-7.5E-02)); +#453332 = VERTEX_POINT('',#453333); +#453333 = CARTESIAN_POINT('',(145.393984,-154.248677,-7.5E-02)); +#453334 = LINE('',#453335,#453336); +#453335 = CARTESIAN_POINT('',(145.382407,-154.260254,-7.5E-02)); +#453336 = VECTOR('',#453337,1.); +#453337 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#453338 = ORIENTED_EDGE('',*,*,#453339,.T.); +#453339 = EDGE_CURVE('',#453332,#453340,#453342,.T.); +#453340 = VERTEX_POINT('',#453341); +#453341 = CARTESIAN_POINT('',(145.382407,-154.2371,-7.5E-02)); +#453342 = LINE('',#453343,#453344); +#453343 = CARTESIAN_POINT('',(145.393984,-154.248677,-7.5E-02)); +#453344 = VECTOR('',#453345,1.); +#453345 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#453346 = ORIENTED_EDGE('',*,*,#453347,.T.); +#453347 = EDGE_CURVE('',#453340,#453348,#453350,.T.); +#453348 = VERTEX_POINT('',#453349); +#453349 = CARTESIAN_POINT('',(145.37083,-154.248677,-7.5E-02)); +#453350 = LINE('',#453351,#453352); +#453351 = CARTESIAN_POINT('',(145.382407,-154.2371,-7.5E-02)); +#453352 = VECTOR('',#453353,1.); +#453353 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#453354 = ORIENTED_EDGE('',*,*,#453355,.T.); +#453355 = EDGE_CURVE('',#453348,#453330,#453356,.T.); +#453356 = LINE('',#453357,#453358); +#453357 = CARTESIAN_POINT('',(145.37083,-154.248677,-7.5E-02)); +#453358 = VECTOR('',#453359,1.); +#453359 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#453360 = FACE_BOUND('',#453361,.T.); +#453361 = EDGE_LOOP('',(#453362,#453372,#453380,#453388)); +#453362 = ORIENTED_EDGE('',*,*,#453363,.T.); +#453363 = EDGE_CURVE('',#453364,#453366,#453368,.T.); +#453364 = VERTEX_POINT('',#453365); +#453365 = CARTESIAN_POINT('',(145.428715,-154.2371,-7.5E-02)); +#453366 = VERTEX_POINT('',#453367); +#453367 = CARTESIAN_POINT('',(145.440292,-154.225523,-7.5E-02)); +#453368 = LINE('',#453369,#453370); +#453369 = CARTESIAN_POINT('',(145.428715,-154.2371,-7.5E-02)); +#453370 = VECTOR('',#453371,1.); +#453371 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#453372 = ORIENTED_EDGE('',*,*,#453373,.T.); +#453373 = EDGE_CURVE('',#453366,#453374,#453376,.T.); +#453374 = VERTEX_POINT('',#453375); +#453375 = CARTESIAN_POINT('',(145.428715,-154.213946,-7.5E-02)); +#453376 = LINE('',#453377,#453378); +#453377 = CARTESIAN_POINT('',(145.440292,-154.225523,-7.5E-02)); +#453378 = VECTOR('',#453379,1.); +#453379 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#453380 = ORIENTED_EDGE('',*,*,#453381,.T.); +#453381 = EDGE_CURVE('',#453374,#453382,#453384,.T.); +#453382 = VERTEX_POINT('',#453383); +#453383 = CARTESIAN_POINT('',(145.417138,-154.225523,-7.5E-02)); +#453384 = LINE('',#453385,#453386); +#453385 = CARTESIAN_POINT('',(145.428715,-154.213946,-7.5E-02)); +#453386 = VECTOR('',#453387,1.); +#453387 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#453388 = ORIENTED_EDGE('',*,*,#453389,.T.); +#453389 = EDGE_CURVE('',#453382,#453364,#453390,.T.); +#453390 = LINE('',#453391,#453392); +#453391 = CARTESIAN_POINT('',(145.417138,-154.225523,-7.5E-02)); +#453392 = VECTOR('',#453393,1.); +#453393 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#453394 = FACE_BOUND('',#453395,.T.); +#453395 = EDGE_LOOP('',(#453396,#453406,#453414,#453422)); +#453396 = ORIENTED_EDGE('',*,*,#453397,.T.); +#453397 = EDGE_CURVE('',#453398,#453400,#453402,.T.); +#453398 = VERTEX_POINT('',#453399); +#453399 = CARTESIAN_POINT('',(145.475023,-154.213946,-7.5E-02)); +#453400 = VERTEX_POINT('',#453401); +#453401 = CARTESIAN_POINT('',(145.4866,-154.202369,-7.5E-02)); +#453402 = LINE('',#453403,#453404); +#453403 = CARTESIAN_POINT('',(145.475023,-154.213946,-7.5E-02)); +#453404 = VECTOR('',#453405,1.); +#453405 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#453406 = ORIENTED_EDGE('',*,*,#453407,.T.); +#453407 = EDGE_CURVE('',#453400,#453408,#453410,.T.); +#453408 = VERTEX_POINT('',#453409); +#453409 = CARTESIAN_POINT('',(145.475023,-154.190792,-7.5E-02)); +#453410 = LINE('',#453411,#453412); +#453411 = CARTESIAN_POINT('',(145.4866,-154.202369,-7.5E-02)); +#453412 = VECTOR('',#453413,1.); +#453413 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#453414 = ORIENTED_EDGE('',*,*,#453415,.T.); +#453415 = EDGE_CURVE('',#453408,#453416,#453418,.T.); +#453416 = VERTEX_POINT('',#453417); +#453417 = CARTESIAN_POINT('',(145.463446,-154.202369,-7.5E-02)); +#453418 = LINE('',#453419,#453420); +#453419 = CARTESIAN_POINT('',(145.475023,-154.190792,-7.5E-02)); +#453420 = VECTOR('',#453421,1.); +#453421 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#453422 = ORIENTED_EDGE('',*,*,#453423,.T.); +#453423 = EDGE_CURVE('',#453416,#453398,#453424,.T.); +#453424 = LINE('',#453425,#453426); +#453425 = CARTESIAN_POINT('',(145.463446,-154.202369,-7.5E-02)); +#453426 = VECTOR('',#453427,1.); +#453427 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#453428 = FACE_BOUND('',#453429,.T.); +#453429 = EDGE_LOOP('',(#453430,#453440,#453448,#453456)); +#453430 = ORIENTED_EDGE('',*,*,#453431,.T.); +#453431 = EDGE_CURVE('',#453432,#453434,#453436,.T.); +#453432 = VERTEX_POINT('',#453433); +#453433 = CARTESIAN_POINT('',(145.521331,-154.190792,-7.5E-02)); +#453434 = VERTEX_POINT('',#453435); +#453435 = CARTESIAN_POINT('',(145.532908,-154.179215,-7.5E-02)); +#453436 = LINE('',#453437,#453438); +#453437 = CARTESIAN_POINT('',(145.521331,-154.190792,-7.5E-02)); +#453438 = VECTOR('',#453439,1.); +#453439 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#453440 = ORIENTED_EDGE('',*,*,#453441,.T.); +#453441 = EDGE_CURVE('',#453434,#453442,#453444,.T.); +#453442 = VERTEX_POINT('',#453443); +#453443 = CARTESIAN_POINT('',(145.521331,-154.167638,-7.5E-02)); +#453444 = LINE('',#453445,#453446); +#453445 = CARTESIAN_POINT('',(145.532908,-154.179215,-7.5E-02)); +#453446 = VECTOR('',#453447,1.); +#453447 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#453448 = ORIENTED_EDGE('',*,*,#453449,.T.); +#453449 = EDGE_CURVE('',#453442,#453450,#453452,.T.); +#453450 = VERTEX_POINT('',#453451); +#453451 = CARTESIAN_POINT('',(145.509754,-154.179215,-7.5E-02)); +#453452 = LINE('',#453453,#453454); +#453453 = CARTESIAN_POINT('',(145.521331,-154.167638,-7.5E-02)); +#453454 = VECTOR('',#453455,1.); +#453455 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#453456 = ORIENTED_EDGE('',*,*,#453457,.T.); +#453457 = EDGE_CURVE('',#453450,#453432,#453458,.T.); +#453458 = LINE('',#453459,#453460); +#453459 = CARTESIAN_POINT('',(145.509754,-154.179215,-7.5E-02)); +#453460 = VECTOR('',#453461,1.); +#453461 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#453462 = FACE_BOUND('',#453463,.T.); +#453463 = EDGE_LOOP('',(#453464,#453475,#453483,#453491,#453500,#453508, + #453516,#453524,#453532,#453540,#453548,#453556)); +#453464 = ORIENTED_EDGE('',*,*,#453465,.T.); +#453465 = EDGE_CURVE('',#453466,#453468,#453470,.T.); +#453466 = VERTEX_POINT('',#453467); +#453467 = CARTESIAN_POINT('',(147.660494,-153.713264,-7.5E-02)); +#453468 = VERTEX_POINT('',#453469); +#453469 = CARTESIAN_POINT('',(147.59133,-153.510096,-7.5E-02)); +#453470 = CIRCLE('',#453471,0.370247543668); +#453471 = AXIS2_PLACEMENT_3D('',#453472,#453473,#453474); +#453472 = CARTESIAN_POINT('',(147.29046134717,-153.7258766695,-7.5E-02) + ); +#453473 = DIRECTION('',(0.,0.,1.)); +#453474 = DIRECTION('',(0.999419602257,3.406550490889E-02,-0.)); +#453475 = ORIENTED_EDGE('',*,*,#453476,.T.); +#453476 = EDGE_CURVE('',#453468,#453477,#453479,.T.); +#453477 = VERTEX_POINT('',#453478); +#453478 = CARTESIAN_POINT('',(147.557378,-153.477425,-7.5E-02)); +#453479 = LINE('',#453480,#453481); +#453480 = CARTESIAN_POINT('',(147.59133,-153.510096,-7.5E-02)); +#453481 = VECTOR('',#453482,1.); +#453482 = DIRECTION('',(-0.720569558233,0.693382658961,0.)); +#453483 = ORIENTED_EDGE('',*,*,#453484,.T.); +#453484 = EDGE_CURVE('',#453477,#453485,#453487,.T.); +#453485 = VERTEX_POINT('',#453486); +#453486 = CARTESIAN_POINT('',(147.501851,-153.452569,-7.5E-02)); +#453487 = LINE('',#453488,#453489); +#453488 = CARTESIAN_POINT('',(147.557378,-153.477425,-7.5E-02)); +#453489 = VECTOR('',#453490,1.); +#453490 = DIRECTION('',(-0.912726480337,0.408571134678,0.)); +#453491 = ORIENTED_EDGE('',*,*,#453492,.T.); +#453492 = EDGE_CURVE('',#453485,#453493,#453495,.T.); +#453493 = VERTEX_POINT('',#453494); +#453494 = CARTESIAN_POINT('',(147.417541,-153.519521,-7.5E-02)); +#453495 = CIRCLE('',#453496,6.433611788788E-02); +#453496 = AXIS2_PLACEMENT_3D('',#453497,#453498,#453499); +#453497 = CARTESIAN_POINT('',(147.48160751343,-153.5136373004,-7.5E-02) + ); +#453498 = DIRECTION('',(0.,0.,1.)); +#453499 = DIRECTION('',(0.314651975063,0.949207108375,-0.)); +#453500 = ORIENTED_EDGE('',*,*,#453501,.T.); +#453501 = EDGE_CURVE('',#453493,#453502,#453504,.T.); +#453502 = VERTEX_POINT('',#453503); +#453503 = CARTESIAN_POINT('',(147.427031,-153.591952,-7.5E-02)); +#453504 = LINE('',#453505,#453506); +#453505 = CARTESIAN_POINT('',(147.417541,-153.519521,-7.5E-02)); +#453506 = VECTOR('',#453507,1.); +#453507 = DIRECTION('',(0.129910930249,-0.991525667949,0.)); +#453508 = ORIENTED_EDGE('',*,*,#453509,.T.); +#453509 = EDGE_CURVE('',#453502,#453510,#453512,.T.); +#453510 = VERTEX_POINT('',#453511); +#453511 = CARTESIAN_POINT('',(147.454049,-153.669519,-7.5E-02)); +#453512 = LINE('',#453513,#453514); +#453513 = CARTESIAN_POINT('',(147.427031,-153.591952,-7.5E-02)); +#453514 = VECTOR('',#453515,1.); +#453515 = DIRECTION('',(0.328935188994,-0.94435249851,0.)); +#453516 = ORIENTED_EDGE('',*,*,#453517,.T.); +#453517 = EDGE_CURVE('',#453510,#453518,#453520,.T.); +#453518 = VERTEX_POINT('',#453519); +#453519 = CARTESIAN_POINT('',(147.492313,-153.730902,-7.5E-02)); +#453520 = LINE('',#453521,#453522); +#453521 = CARTESIAN_POINT('',(147.454049,-153.669519,-7.5E-02)); +#453522 = VECTOR('',#453523,1.); +#453523 = DIRECTION('',(0.529000685979,-0.848621396285,0.)); +#453524 = ORIENTED_EDGE('',*,*,#453525,.T.); +#453525 = EDGE_CURVE('',#453518,#453526,#453528,.T.); +#453526 = VERTEX_POINT('',#453527); +#453527 = CARTESIAN_POINT('',(147.506047,-153.743571,-7.5E-02)); +#453528 = LINE('',#453529,#453530); +#453529 = CARTESIAN_POINT('',(147.492313,-153.730902,-7.5E-02)); +#453530 = VECTOR('',#453531,1.); +#453531 = DIRECTION('',(0.735031158556,-0.678033329529,0.)); +#453532 = ORIENTED_EDGE('',*,*,#453533,.T.); +#453533 = EDGE_CURVE('',#453526,#453534,#453536,.T.); +#453534 = VERTEX_POINT('',#453535); +#453535 = CARTESIAN_POINT('',(147.559701,-153.768951,-7.5E-02)); +#453536 = LINE('',#453537,#453538); +#453537 = CARTESIAN_POINT('',(147.506047,-153.743571,-7.5E-02)); +#453538 = VECTOR('',#453539,1.); +#453539 = DIRECTION('',(0.903966188261,-0.427603941142,0.)); +#453540 = ORIENTED_EDGE('',*,*,#453541,.T.); +#453541 = EDGE_CURVE('',#453534,#453542,#453544,.T.); +#453542 = VERTEX_POINT('',#453543); +#453543 = CARTESIAN_POINT('',(147.615019,-153.771633,-7.5E-02)); +#453544 = LINE('',#453545,#453546); +#453545 = CARTESIAN_POINT('',(147.559701,-153.768951,-7.5E-02)); +#453546 = VECTOR('',#453547,1.); +#453547 = DIRECTION('',(0.998826752101,-4.842643170678E-02,0.)); +#453548 = ORIENTED_EDGE('',*,*,#453549,.T.); +#453549 = EDGE_CURVE('',#453542,#453550,#453552,.T.); +#453550 = VERTEX_POINT('',#453551); +#453551 = CARTESIAN_POINT('',(147.652433,-153.749363,-7.5E-02)); +#453552 = LINE('',#453553,#453554); +#453553 = CARTESIAN_POINT('',(147.615019,-153.771633,-7.5E-02)); +#453554 = VECTOR('',#453555,1.); +#453555 = DIRECTION('',(0.859295287834,0.511479821994,0.)); +#453556 = ORIENTED_EDGE('',*,*,#453557,.T.); +#453557 = EDGE_CURVE('',#453550,#453466,#453558,.T.); +#453558 = LINE('',#453559,#453560); +#453559 = CARTESIAN_POINT('',(147.652433,-153.749363,-7.5E-02)); +#453560 = VECTOR('',#453561,1.); +#453561 = DIRECTION('',(0.217935118317,0.975963259659,0.)); +#453562 = PLANE('',#453563); +#453563 = AXIS2_PLACEMENT_3D('',#453564,#453565,#453566); +#453564 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#453565 = DIRECTION('',(-0.,-0.,-1.)); +#453566 = DIRECTION('',(-1.,0.,0.)); +#453567 = SHELL_BASED_SURFACE_MODEL('',(#453568)); +#453568 = OPEN_SHELL('',(#453569)); +#453569 = ADVANCED_FACE('',(#453570),#453848,.T.); +#453570 = FACE_BOUND('',#453571,.T.); +#453571 = EDGE_LOOP('',(#453572,#453583,#453591,#453599,#453607,#453615, + #453623,#453631,#453639,#453647,#453655,#453663,#453671,#453680, + #453688,#453696,#453704,#453713,#453721,#453729,#453737,#453745, + #453753,#453761,#453769,#453777,#453785,#453793,#453801,#453809, + #453818,#453826,#453834,#453842)); +#453572 = ORIENTED_EDGE('',*,*,#453573,.T.); +#453573 = EDGE_CURVE('',#453574,#453576,#453578,.T.); +#453574 = VERTEX_POINT('',#453575); +#453575 = CARTESIAN_POINT('',(153.974926,-150.383623,-7.5E-02)); +#453576 = VERTEX_POINT('',#453577); +#453577 = CARTESIAN_POINT('',(154.069521,-150.357717,-7.5E-02)); +#453578 = CIRCLE('',#453579,4.999982421472E-02); +#453579 = AXIS2_PLACEMENT_3D('',#453580,#453581,#453582); +#453580 = CARTESIAN_POINT('',(154.02479999487,-150.3800779955,-7.5E-02) + ); +#453581 = DIRECTION('',(0.,0.,-1.)); +#453582 = DIRECTION('',(-0.9974834044,-7.090033812353E-02,-0.)); +#453583 = ORIENTED_EDGE('',*,*,#453584,.T.); +#453584 = EDGE_CURVE('',#453576,#453585,#453587,.T.); +#453585 = VERTEX_POINT('',#453586); +#453586 = CARTESIAN_POINT('',(154.120176,-150.464043,-7.5E-02)); +#453587 = LINE('',#453588,#453589); +#453588 = CARTESIAN_POINT('',(154.069521,-150.357717,-7.5E-02)); +#453589 = VECTOR('',#453590,1.); +#453590 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#453591 = ORIENTED_EDGE('',*,*,#453592,.T.); +#453592 = EDGE_CURVE('',#453585,#453593,#453595,.T.); +#453593 = VERTEX_POINT('',#453594); +#453594 = CARTESIAN_POINT('',(154.120176,-150.677064,-7.5E-02)); +#453595 = LINE('',#453596,#453597); +#453596 = CARTESIAN_POINT('',(154.120176,-150.464043,-7.5E-02)); +#453597 = VECTOR('',#453598,1.); +#453598 = DIRECTION('',(0.,-1.,0.)); +#453599 = ORIENTED_EDGE('',*,*,#453600,.T.); +#453600 = EDGE_CURVE('',#453593,#453601,#453603,.T.); +#453601 = VERTEX_POINT('',#453602); +#453602 = CARTESIAN_POINT('',(154.062572,-150.79379,-7.5E-02)); +#453603 = LINE('',#453604,#453605); +#453604 = CARTESIAN_POINT('',(154.120176,-150.677064,-7.5E-02)); +#453605 = VECTOR('',#453606,1.); +#453606 = DIRECTION('',(-0.442542699539,-0.896747433275,0.)); +#453607 = ORIENTED_EDGE('',*,*,#453608,.T.); +#453608 = EDGE_CURVE('',#453601,#453609,#453611,.T.); +#453609 = VERTEX_POINT('',#453610); +#453610 = CARTESIAN_POINT('',(154.04716,-150.805752,-7.5E-02)); +#453611 = LINE('',#453612,#453613); +#453612 = CARTESIAN_POINT('',(154.062572,-150.79379,-7.5E-02)); +#453613 = VECTOR('',#453614,1.); +#453614 = DIRECTION('',(-0.789975570356,-0.613138319012,0.)); +#453615 = ORIENTED_EDGE('',*,*,#453616,.T.); +#453616 = EDGE_CURVE('',#453609,#453617,#453619,.T.); +#453617 = VERTEX_POINT('',#453618); +#453618 = CARTESIAN_POINT('',(153.940829,-150.856407,-7.5E-02)); +#453619 = LINE('',#453620,#453621); +#453620 = CARTESIAN_POINT('',(154.04716,-150.805752,-7.5E-02)); +#453621 = VECTOR('',#453622,1.); +#453622 = DIRECTION('',(-0.902790669215,-0.430080233884,0.)); +#453623 = ORIENTED_EDGE('',*,*,#453624,.T.); +#453624 = EDGE_CURVE('',#453617,#453625,#453627,.T.); +#453625 = VERTEX_POINT('',#453626); +#453626 = CARTESIAN_POINT('',(153.870669,-150.856406,-7.5E-02)); +#453627 = LINE('',#453628,#453629); +#453628 = CARTESIAN_POINT('',(153.940829,-150.856407,-7.5E-02)); +#453629 = VECTOR('',#453630,1.); +#453630 = DIRECTION('',(-0.999999999898,1.425313565242E-05,0.)); +#453631 = ORIENTED_EDGE('',*,*,#453632,.T.); +#453632 = EDGE_CURVE('',#453625,#453633,#453635,.T.); +#453633 = VERTEX_POINT('',#453634); +#453634 = CARTESIAN_POINT('',(153.753944,-150.798802,-7.5E-02)); +#453635 = LINE('',#453636,#453637); +#453636 = CARTESIAN_POINT('',(153.870669,-150.856406,-7.5E-02)); +#453637 = VECTOR('',#453638,1.); +#453638 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#453639 = ORIENTED_EDGE('',*,*,#453640,.T.); +#453640 = EDGE_CURVE('',#453633,#453641,#453643,.T.); +#453641 = VERTEX_POINT('',#453642); +#453642 = CARTESIAN_POINT('',(153.741982,-150.78339,-7.5E-02)); +#453643 = LINE('',#453644,#453645); +#453644 = CARTESIAN_POINT('',(153.753944,-150.798802,-7.5E-02)); +#453645 = VECTOR('',#453646,1.); +#453646 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#453647 = ORIENTED_EDGE('',*,*,#453648,.T.); +#453648 = EDGE_CURVE('',#453641,#453649,#453651,.T.); +#453649 = VERTEX_POINT('',#453650); +#453650 = CARTESIAN_POINT('',(153.691327,-150.677064,-7.5E-02)); +#453651 = LINE('',#453652,#453653); +#453652 = CARTESIAN_POINT('',(153.741982,-150.78339,-7.5E-02)); +#453653 = VECTOR('',#453654,1.); +#453654 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#453655 = ORIENTED_EDGE('',*,*,#453656,.T.); +#453656 = EDGE_CURVE('',#453649,#453657,#453659,.T.); +#453657 = VERTEX_POINT('',#453658); +#453658 = CARTESIAN_POINT('',(153.689085,-150.534738,-7.5E-02)); +#453659 = LINE('',#453660,#453661); +#453660 = CARTESIAN_POINT('',(153.691327,-150.677064,-7.5E-02)); +#453661 = VECTOR('',#453662,1.); +#453662 = DIRECTION('',(-1.575061396373E-02,0.999875951386,0.)); +#453663 = ORIENTED_EDGE('',*,*,#453664,.T.); +#453664 = EDGE_CURVE('',#453657,#453665,#453667,.T.); +#453665 = VERTEX_POINT('',#453666); +#453666 = CARTESIAN_POINT('',(153.654198,-150.464964,-7.5E-02)); +#453667 = LINE('',#453668,#453669); +#453668 = CARTESIAN_POINT('',(153.689085,-150.534738,-7.5E-02)); +#453669 = VECTOR('',#453670,1.); +#453670 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#453671 = ORIENTED_EDGE('',*,*,#453672,.T.); +#453672 = EDGE_CURVE('',#453665,#453673,#453675,.T.); +#453673 = VERTEX_POINT('',#453674); +#453674 = CARTESIAN_POINT('',(153.490638,-150.464964,-7.5E-02)); +#453675 = CIRCLE('',#453676,0.111877522228); +#453676 = AXIS2_PLACEMENT_3D('',#453677,#453678,#453679); +#453677 = CARTESIAN_POINT('',(153.572418,-150.5413093441,-7.5E-02)); +#453678 = DIRECTION('',(0.,0.,1.)); +#453679 = DIRECTION('',(0.73097793347,0.682401099632,-0.)); +#453680 = ORIENTED_EDGE('',*,*,#453681,.T.); +#453681 = EDGE_CURVE('',#453673,#453682,#453684,.T.); +#453682 = VERTEX_POINT('',#453683); +#453683 = CARTESIAN_POINT('',(153.455752,-150.534738,-7.5E-02)); +#453684 = LINE('',#453685,#453686); +#453685 = CARTESIAN_POINT('',(153.490638,-150.464964,-7.5E-02)); +#453686 = VECTOR('',#453687,1.); +#453687 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#453688 = ORIENTED_EDGE('',*,*,#453689,.T.); +#453689 = EDGE_CURVE('',#453682,#453690,#453692,.T.); +#453690 = VERTEX_POINT('',#453691); +#453691 = CARTESIAN_POINT('',(153.455752,-150.653989,-7.5E-02)); +#453692 = LINE('',#453693,#453694); +#453693 = CARTESIAN_POINT('',(153.455752,-150.534738,-7.5E-02)); +#453694 = VECTOR('',#453695,1.); +#453695 = DIRECTION('',(0.,-1.,0.)); +#453696 = ORIENTED_EDGE('',*,*,#453697,.T.); +#453697 = EDGE_CURVE('',#453690,#453698,#453700,.T.); +#453698 = VERTEX_POINT('',#453699); +#453699 = CARTESIAN_POINT('',(153.498092,-150.738669,-7.5E-02)); +#453700 = LINE('',#453701,#453702); +#453701 = CARTESIAN_POINT('',(153.455752,-150.653989,-7.5E-02)); +#453702 = VECTOR('',#453703,1.); +#453703 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#453704 = ORIENTED_EDGE('',*,*,#453705,.T.); +#453705 = EDGE_CURVE('',#453698,#453706,#453708,.T.); +#453706 = VERTEX_POINT('',#453707); +#453707 = CARTESIAN_POINT('',(153.408649,-150.78339,-7.5E-02)); +#453708 = CIRCLE('',#453709,5.000004522505E-02); +#453709 = AXIS2_PLACEMENT_3D('',#453710,#453711,#453712); +#453710 = CARTESIAN_POINT('',(153.45337053675,-150.7610295735,-7.5E-02) + ); +#453711 = DIRECTION('',(0.,0.,-1.)); +#453712 = DIRECTION('',(0.894428455807,0.447211065876,0.)); +#453713 = ORIENTED_EDGE('',*,*,#453714,.T.); +#453714 = EDGE_CURVE('',#453706,#453715,#453717,.T.); +#453715 = VERTEX_POINT('',#453716); +#453716 = CARTESIAN_POINT('',(153.357994,-150.677064,-7.5E-02)); +#453717 = LINE('',#453718,#453719); +#453718 = CARTESIAN_POINT('',(153.408649,-150.78339,-7.5E-02)); +#453719 = VECTOR('',#453720,1.); +#453720 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#453721 = ORIENTED_EDGE('',*,*,#453722,.T.); +#453722 = EDGE_CURVE('',#453715,#453723,#453725,.T.); +#453723 = VERTEX_POINT('',#453724); +#453724 = CARTESIAN_POINT('',(153.357994,-150.511662,-7.5E-02)); +#453725 = LINE('',#453726,#453727); +#453726 = CARTESIAN_POINT('',(153.357994,-150.677064,-7.5E-02)); +#453727 = VECTOR('',#453728,1.); +#453728 = DIRECTION('',(0.,1.,0.)); +#453729 = ORIENTED_EDGE('',*,*,#453730,.T.); +#453730 = EDGE_CURVE('',#453723,#453731,#453733,.T.); +#453731 = VERTEX_POINT('',#453732); +#453732 = CARTESIAN_POINT('',(153.415598,-150.394937,-7.5E-02)); +#453733 = LINE('',#453734,#453735); +#453734 = CARTESIAN_POINT('',(153.357994,-150.511662,-7.5E-02)); +#453735 = VECTOR('',#453736,1.); +#453736 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#453737 = ORIENTED_EDGE('',*,*,#453738,.T.); +#453738 = EDGE_CURVE('',#453731,#453739,#453741,.T.); +#453739 = VERTEX_POINT('',#453740); +#453740 = CARTESIAN_POINT('',(153.43101,-150.382976,-7.5E-02)); +#453741 = LINE('',#453742,#453743); +#453742 = CARTESIAN_POINT('',(153.415598,-150.394937,-7.5E-02)); +#453743 = VECTOR('',#453744,1.); +#453744 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#453745 = ORIENTED_EDGE('',*,*,#453746,.T.); +#453746 = EDGE_CURVE('',#453739,#453747,#453749,.T.); +#453747 = VERTEX_POINT('',#453748); +#453748 = CARTESIAN_POINT('',(153.537336,-150.33232,-7.5E-02)); +#453749 = LINE('',#453750,#453751); +#453750 = CARTESIAN_POINT('',(153.43101,-150.382976,-7.5E-02)); +#453751 = VECTOR('',#453752,1.); +#453752 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#453753 = ORIENTED_EDGE('',*,*,#453754,.T.); +#453754 = EDGE_CURVE('',#453747,#453755,#453757,.T.); +#453755 = VERTEX_POINT('',#453756); +#453756 = CARTESIAN_POINT('',(153.598684,-150.330566,-7.5E-02)); +#453757 = LINE('',#453758,#453759); +#453758 = CARTESIAN_POINT('',(153.537336,-150.33232,-7.5E-02)); +#453759 = VECTOR('',#453760,1.); +#453760 = DIRECTION('',(0.999591528081,2.857931049521E-02,0.)); +#453761 = ORIENTED_EDGE('',*,*,#453762,.T.); +#453762 = EDGE_CURVE('',#453755,#453763,#453765,.T.); +#453763 = VERTEX_POINT('',#453764); +#453764 = CARTESIAN_POINT('',(153.618589,-150.335357,-7.5E-02)); +#453765 = LINE('',#453766,#453767); +#453766 = CARTESIAN_POINT('',(153.598684,-150.330566,-7.5E-02)); +#453767 = VECTOR('',#453768,1.); +#453768 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#453769 = ORIENTED_EDGE('',*,*,#453770,.T.); +#453770 = EDGE_CURVE('',#453763,#453771,#453773,.T.); +#453771 = VERTEX_POINT('',#453772); +#453772 = CARTESIAN_POINT('',(153.726417,-150.392747,-7.5E-02)); +#453773 = LINE('',#453774,#453775); +#453774 = CARTESIAN_POINT('',(153.618589,-150.335357,-7.5E-02)); +#453775 = VECTOR('',#453776,1.); +#453776 = DIRECTION('',(0.882754645264,-0.469834264678,0.)); +#453777 = ORIENTED_EDGE('',*,*,#453778,.T.); +#453778 = EDGE_CURVE('',#453771,#453779,#453781,.T.); +#453779 = VERTEX_POINT('',#453780); +#453780 = CARTESIAN_POINT('',(153.785279,-150.503801,-7.5E-02)); +#453781 = LINE('',#453782,#453783); +#453782 = CARTESIAN_POINT('',(153.726417,-150.392747,-7.5E-02)); +#453783 = VECTOR('',#453784,1.); +#453784 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#453785 = ORIENTED_EDGE('',*,*,#453786,.T.); +#453786 = EDGE_CURVE('',#453779,#453787,#453789,.T.); +#453787 = VERTEX_POINT('',#453788); +#453788 = CARTESIAN_POINT('',(153.789085,-150.522935,-7.5E-02)); +#453789 = LINE('',#453790,#453791); +#453790 = CARTESIAN_POINT('',(153.785279,-150.503801,-7.5E-02)); +#453791 = VECTOR('',#453792,1.); +#453792 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#453793 = ORIENTED_EDGE('',*,*,#453794,.T.); +#453794 = EDGE_CURVE('',#453787,#453795,#453797,.T.); +#453795 = VERTEX_POINT('',#453796); +#453796 = CARTESIAN_POINT('',(153.789085,-150.653989,-7.5E-02)); +#453797 = LINE('',#453798,#453799); +#453798 = CARTESIAN_POINT('',(153.789085,-150.522935,-7.5E-02)); +#453799 = VECTOR('',#453800,1.); +#453800 = DIRECTION('',(0.,-1.,0.)); +#453801 = ORIENTED_EDGE('',*,*,#453802,.T.); +#453802 = EDGE_CURVE('',#453795,#453803,#453805,.T.); +#453803 = VERTEX_POINT('',#453804); +#453804 = CARTESIAN_POINT('',(153.823971,-150.723762,-7.5E-02)); +#453805 = LINE('',#453806,#453807); +#453806 = CARTESIAN_POINT('',(153.789085,-150.653989,-7.5E-02)); +#453807 = VECTOR('',#453808,1.); +#453808 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#453809 = ORIENTED_EDGE('',*,*,#453810,.T.); +#453810 = EDGE_CURVE('',#453803,#453811,#453813,.T.); +#453811 = VERTEX_POINT('',#453812); +#453812 = CARTESIAN_POINT('',(153.987532,-150.723762,-7.5E-02)); +#453813 = CIRCLE('',#453814,0.111876864088); +#453814 = AXIS2_PLACEMENT_3D('',#453815,#453816,#453817); +#453815 = CARTESIAN_POINT('',(153.9057515,-150.6474181558,-7.5E-02)); +#453816 = DIRECTION('',(0.,0.,1.)); +#453817 = DIRECTION('',(-0.730986702803,-0.682391705932,0.)); +#453818 = ORIENTED_EDGE('',*,*,#453819,.T.); +#453819 = EDGE_CURVE('',#453811,#453820,#453822,.T.); +#453820 = VERTEX_POINT('',#453821); +#453821 = CARTESIAN_POINT('',(154.022419,-150.653988,-7.5E-02)); +#453822 = LINE('',#453823,#453824); +#453823 = CARTESIAN_POINT('',(153.987532,-150.723762,-7.5E-02)); +#453824 = VECTOR('',#453825,1.); +#453825 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#453826 = ORIENTED_EDGE('',*,*,#453827,.T.); +#453827 = EDGE_CURVE('',#453820,#453828,#453830,.T.); +#453828 = VERTEX_POINT('',#453829); +#453829 = CARTESIAN_POINT('',(154.022419,-150.487119,-7.5E-02)); +#453830 = LINE('',#453831,#453832); +#453831 = CARTESIAN_POINT('',(154.022419,-150.653988,-7.5E-02)); +#453832 = VECTOR('',#453833,1.); +#453833 = DIRECTION('',(0.,1.,0.)); +#453834 = ORIENTED_EDGE('',*,*,#453835,.T.); +#453835 = EDGE_CURVE('',#453828,#453836,#453838,.T.); +#453836 = VERTEX_POINT('',#453837); +#453837 = CARTESIAN_POINT('',(153.980079,-150.402439,-7.5E-02)); +#453838 = LINE('',#453839,#453840); +#453839 = CARTESIAN_POINT('',(154.022419,-150.487119,-7.5E-02)); +#453840 = VECTOR('',#453841,1.); +#453841 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#453842 = ORIENTED_EDGE('',*,*,#453843,.T.); +#453843 = EDGE_CURVE('',#453836,#453574,#453844,.T.); +#453844 = LINE('',#453845,#453846); +#453845 = CARTESIAN_POINT('',(153.980079,-150.402439,-7.5E-02)); +#453846 = VECTOR('',#453847,1.); +#453847 = DIRECTION('',(-0.264136520179,0.964485302484,0.)); +#453848 = PLANE('',#453849); +#453849 = AXIS2_PLACEMENT_3D('',#453850,#453851,#453852); +#453850 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#453851 = DIRECTION('',(-0.,-0.,-1.)); +#453852 = DIRECTION('',(-1.,0.,0.)); +#453853 = SHELL_BASED_SURFACE_MODEL('',(#453854)); +#453854 = OPEN_SHELL('',(#453855)); +#453855 = ADVANCED_FACE('',(#453856),#453950,.T.); +#453856 = FACE_BOUND('',#453857,.T.); +#453857 = EDGE_LOOP('',(#453858,#453869,#453877,#453886,#453894,#453903, + #453911,#453920,#453928,#453936,#453944)); +#453858 = ORIENTED_EDGE('',*,*,#453859,.T.); +#453859 = EDGE_CURVE('',#453860,#453862,#453864,.T.); +#453860 = VERTEX_POINT('',#453861); +#453861 = CARTESIAN_POINT('',(153.386618,-149.854843,-7.5E-02)); +#453862 = VERTEX_POINT('',#453863); +#453863 = CARTESIAN_POINT('',(153.405752,-149.758649,-7.5E-02)); +#453864 = CIRCLE('',#453865,4.999998452108E-02); +#453865 = AXIS2_PLACEMENT_3D('',#453866,#453867,#453868); +#453866 = CARTESIAN_POINT('',(153.40575203736,-149.8086489845,-7.5E-02) + ); +#453867 = DIRECTION('',(0.,0.,-1.)); +#453868 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#453869 = ORIENTED_EDGE('',*,*,#453870,.T.); +#453870 = EDGE_CURVE('',#453862,#453871,#453873,.T.); +#453871 = VERTEX_POINT('',#453872); +#453872 = CARTESIAN_POINT('',(154.072419,-149.758649,-7.5E-02)); +#453873 = LINE('',#453874,#453875); +#453874 = CARTESIAN_POINT('',(153.405752,-149.758649,-7.5E-02)); +#453875 = VECTOR('',#453876,1.); +#453876 = DIRECTION('',(1.,0.,0.)); +#453877 = ORIENTED_EDGE('',*,*,#453878,.T.); +#453878 = EDGE_CURVE('',#453871,#453879,#453881,.T.); +#453879 = VERTEX_POINT('',#453880); +#453880 = CARTESIAN_POINT('',(154.072419,-149.858649,-7.5E-02)); +#453881 = CIRCLE('',#453882,5.000000000003E-02); +#453882 = AXIS2_PLACEMENT_3D('',#453883,#453884,#453885); +#453883 = CARTESIAN_POINT('',(154.07241895228,-149.808649,-7.5E-02)); +#453884 = DIRECTION('',(0.,0.,-1.)); +#453885 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#453886 = ORIENTED_EDGE('',*,*,#453887,.T.); +#453887 = EDGE_CURVE('',#453879,#453888,#453890,.T.); +#453888 = VERTEX_POINT('',#453889); +#453889 = CARTESIAN_POINT('',(153.608032,-149.858649,-7.5E-02)); +#453890 = LINE('',#453891,#453892); +#453891 = CARTESIAN_POINT('',(154.072419,-149.858649,-7.5E-02)); +#453892 = VECTOR('',#453893,1.); +#453893 = DIRECTION('',(-1.,0.,0.)); +#453894 = ORIENTED_EDGE('',*,*,#453895,.T.); +#453895 = EDGE_CURVE('',#453888,#453896,#453898,.T.); +#453896 = VERTEX_POINT('',#453897); +#453897 = CARTESIAN_POINT('',(153.455752,-150.010928,-7.5E-02)); +#453898 = CIRCLE('',#453899,0.215060043145); +#453899 = AXIS2_PLACEMENT_3D('',#453900,#453901,#453902); +#453900 = CARTESIAN_POINT('',(153.66352799719,-150.0664253616,-7.5E-02) + ); +#453901 = DIRECTION('',(0.,0.,1.)); +#453902 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#453903 = ORIENTED_EDGE('',*,*,#453904,.T.); +#453904 = EDGE_CURVE('',#453896,#453905,#453907,.T.); +#453905 = VERTEX_POINT('',#453906); +#453906 = CARTESIAN_POINT('',(153.455752,-150.094363,-7.5E-02)); +#453907 = LINE('',#453908,#453909); +#453908 = CARTESIAN_POINT('',(153.455752,-150.010928,-7.5E-02)); +#453909 = VECTOR('',#453910,1.); +#453910 = DIRECTION('',(0.,-1.,0.)); +#453911 = ORIENTED_EDGE('',*,*,#453912,.T.); +#453912 = EDGE_CURVE('',#453905,#453913,#453915,.T.); +#453913 = VERTEX_POINT('',#453914); +#453914 = CARTESIAN_POINT('',(153.355752,-150.094363,-7.5E-02)); +#453915 = CIRCLE('',#453916,5.000000000002E-02); +#453916 = AXIS2_PLACEMENT_3D('',#453917,#453918,#453919); +#453917 = CARTESIAN_POINT('',(153.405752,-150.0943629522,-7.5E-02)); +#453918 = DIRECTION('',(-0.,0.,-1.)); +#453919 = DIRECTION('',(1.,-9.542361567576E-07,-0.)); +#453920 = ORIENTED_EDGE('',*,*,#453921,.T.); +#453921 = EDGE_CURVE('',#453913,#453922,#453924,.T.); +#453922 = VERTEX_POINT('',#453923); +#453923 = CARTESIAN_POINT('',(153.357994,-149.987852,-7.5E-02)); +#453924 = LINE('',#453925,#453926); +#453925 = CARTESIAN_POINT('',(153.355752,-150.094363,-7.5E-02)); +#453926 = VECTOR('',#453927,1.); +#453927 = DIRECTION('',(2.104480731704E-02,0.999778533519,0.)); +#453928 = ORIENTED_EDGE('',*,*,#453929,.T.); +#453929 = EDGE_CURVE('',#453922,#453930,#453932,.T.); +#453930 = VERTEX_POINT('',#453931); +#453931 = CARTESIAN_POINT('',(153.418016,-149.868532,-7.5E-02)); +#453932 = LINE('',#453933,#453934); +#453933 = CARTESIAN_POINT('',(153.357994,-149.987852,-7.5E-02)); +#453934 = VECTOR('',#453935,1.); +#453935 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#453936 = ORIENTED_EDGE('',*,*,#453937,.T.); +#453937 = EDGE_CURVE('',#453930,#453938,#453940,.T.); +#453938 = VERTEX_POINT('',#453939); +#453939 = CARTESIAN_POINT('',(153.427899,-149.858649,-7.5E-02)); +#453940 = LINE('',#453941,#453942); +#453941 = CARTESIAN_POINT('',(153.418016,-149.868532,-7.5E-02)); +#453942 = VECTOR('',#453943,1.); +#453943 = DIRECTION('',(0.707106781188,0.707106781186,0.)); +#453944 = ORIENTED_EDGE('',*,*,#453945,.T.); +#453945 = EDGE_CURVE('',#453938,#453860,#453946,.T.); +#453946 = LINE('',#453947,#453948); +#453947 = CARTESIAN_POINT('',(153.427899,-149.858649,-7.5E-02)); +#453948 = VECTOR('',#453949,1.); +#453949 = DIRECTION('',(-0.995776727161,9.180800425376E-02,0.)); +#453950 = PLANE('',#453951); +#453951 = AXIS2_PLACEMENT_3D('',#453952,#453953,#453954); +#453952 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#453953 = DIRECTION('',(-0.,-0.,-1.)); +#453954 = DIRECTION('',(-1.,0.,0.)); +#453955 = SHELL_BASED_SURFACE_MODEL('',(#453956)); +#453956 = OPEN_SHELL('',(#453957)); +#453957 = ADVANCED_FACE('',(#453958),#454107,.T.); +#453958 = FACE_BOUND('',#453959,.T.); +#453959 = EDGE_LOOP('',(#453960,#453971,#453979,#453988,#453996,#454004, + #454012,#454020,#454028,#454036,#454044,#454053,#454061,#454069, + #454077,#454085,#454093,#454101)); +#453960 = ORIENTED_EDGE('',*,*,#453961,.T.); +#453961 = EDGE_CURVE('',#453962,#453964,#453966,.T.); +#453962 = VERTEX_POINT('',#453963); +#453963 = CARTESIAN_POINT('',(151.776674,-149.283416,-7.5E-02)); +#453964 = VERTEX_POINT('',#453965); +#453965 = CARTESIAN_POINT('',(151.795808,-149.187222,-7.5E-02)); +#453966 = CIRCLE('',#453967,4.999998452108E-02); +#453967 = AXIS2_PLACEMENT_3D('',#453968,#453969,#453970); +#453968 = CARTESIAN_POINT('',(151.79580803736,-149.2372219845,-7.5E-02) + ); +#453969 = DIRECTION('',(0.,0.,-1.)); +#453970 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#453971 = ORIENTED_EDGE('',*,*,#453972,.T.); +#453972 = EDGE_CURVE('',#453964,#453973,#453975,.T.); +#453973 = VERTEX_POINT('',#453974); +#453974 = CARTESIAN_POINT('',(152.462475,-149.187222,-7.5E-02)); +#453975 = LINE('',#453976,#453977); +#453976 = CARTESIAN_POINT('',(151.795808,-149.187222,-7.5E-02)); +#453977 = VECTOR('',#453978,1.); +#453978 = DIRECTION('',(1.,0.,0.)); +#453979 = ORIENTED_EDGE('',*,*,#453980,.T.); +#453980 = EDGE_CURVE('',#453973,#453981,#453983,.T.); +#453981 = VERTEX_POINT('',#453982); +#453982 = CARTESIAN_POINT('',(152.462475,-149.287222,-7.5E-02)); +#453983 = CIRCLE('',#453984,5.000000000004E-02); +#453984 = AXIS2_PLACEMENT_3D('',#453985,#453986,#453987); +#453985 = CARTESIAN_POINT('',(152.46247495228,-149.237222,-7.5E-02)); +#453986 = DIRECTION('',(0.,0.,-1.)); +#453987 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#453988 = ORIENTED_EDGE('',*,*,#453989,.T.); +#453989 = EDGE_CURVE('',#453981,#453990,#453992,.T.); +#453990 = VERTEX_POINT('',#453991); +#453991 = CARTESIAN_POINT('',(151.911757,-149.287222,-7.5E-02)); +#453992 = LINE('',#453993,#453994); +#453993 = CARTESIAN_POINT('',(152.462475,-149.287222,-7.5E-02)); +#453994 = VECTOR('',#453995,1.); +#453995 = DIRECTION('',(-1.,0.,0.)); +#453996 = ORIENTED_EDGE('',*,*,#453997,.T.); +#453997 = EDGE_CURVE('',#453990,#453998,#454000,.T.); +#453998 = VERTEX_POINT('',#453999); +#453999 = CARTESIAN_POINT('',(151.884519,-149.314458,-7.5E-02)); +#454000 = LINE('',#454001,#454002); +#454001 = CARTESIAN_POINT('',(151.911757,-149.287222,-7.5E-02)); +#454002 = VECTOR('',#454003,1.); +#454003 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#454004 = ORIENTED_EDGE('',*,*,#454005,.T.); +#454005 = EDGE_CURVE('',#453998,#454006,#454008,.T.); +#454006 = VERTEX_POINT('',#454007); +#454007 = CARTESIAN_POINT('',(151.845808,-149.391882,-7.5E-02)); +#454008 = LINE('',#454009,#454010); +#454009 = CARTESIAN_POINT('',(151.884519,-149.314458,-7.5E-02)); +#454010 = VECTOR('',#454011,1.); +#454011 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#454012 = ORIENTED_EDGE('',*,*,#454013,.T.); +#454013 = EDGE_CURVE('',#454006,#454014,#454016,.T.); +#454014 = VERTEX_POINT('',#454015); +#454015 = CARTESIAN_POINT('',(151.845808,-149.511133,-7.5E-02)); +#454016 = LINE('',#454017,#454018); +#454017 = CARTESIAN_POINT('',(151.845808,-149.391882,-7.5E-02)); +#454018 = VECTOR('',#454019,1.); +#454019 = DIRECTION('',(0.,-1.,0.)); +#454020 = ORIENTED_EDGE('',*,*,#454021,.T.); +#454021 = EDGE_CURVE('',#454014,#454022,#454024,.T.); +#454022 = VERTEX_POINT('',#454023); +#454023 = CARTESIAN_POINT('',(151.880694,-149.580906,-7.5E-02)); +#454024 = LINE('',#454025,#454026); +#454025 = CARTESIAN_POINT('',(151.845808,-149.511133,-7.5E-02)); +#454026 = VECTOR('',#454027,1.); +#454027 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#454028 = ORIENTED_EDGE('',*,*,#454029,.T.); +#454029 = EDGE_CURVE('',#454022,#454030,#454032,.T.); +#454030 = VERTEX_POINT('',#454031); +#454031 = CARTESIAN_POINT('',(151.950469,-149.615793,-7.5E-02)); +#454032 = LINE('',#454033,#454034); +#454033 = CARTESIAN_POINT('',(151.880694,-149.580906,-7.5E-02)); +#454034 = VECTOR('',#454035,1.); +#454035 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#454036 = ORIENTED_EDGE('',*,*,#454037,.T.); +#454037 = EDGE_CURVE('',#454030,#454038,#454040,.T.); +#454038 = VERTEX_POINT('',#454039); +#454039 = CARTESIAN_POINT('',(152.462475,-149.615793,-7.5E-02)); +#454040 = LINE('',#454041,#454042); +#454041 = CARTESIAN_POINT('',(151.950469,-149.615793,-7.5E-02)); +#454042 = VECTOR('',#454043,1.); +#454043 = DIRECTION('',(1.,0.,0.)); +#454044 = ORIENTED_EDGE('',*,*,#454045,.T.); +#454045 = EDGE_CURVE('',#454038,#454046,#454048,.T.); +#454046 = VERTEX_POINT('',#454047); +#454047 = CARTESIAN_POINT('',(152.462475,-149.715793,-7.5E-02)); +#454048 = CIRCLE('',#454049,5.000000000002E-02); +#454049 = AXIS2_PLACEMENT_3D('',#454050,#454051,#454052); +#454050 = CARTESIAN_POINT('',(152.46247495228,-149.665793,-7.5E-02)); +#454051 = DIRECTION('',(0.,0.,-1.)); +#454052 = DIRECTION('',(9.542367251923E-07,1.,0.)); +#454053 = ORIENTED_EDGE('',*,*,#454054,.T.); +#454054 = EDGE_CURVE('',#454046,#454055,#454057,.T.); +#454055 = VERTEX_POINT('',#454056); +#454056 = CARTESIAN_POINT('',(151.927392,-149.71355,-7.5E-02)); +#454057 = LINE('',#454058,#454059); +#454058 = CARTESIAN_POINT('',(152.462475,-149.715793,-7.5E-02)); +#454059 = VECTOR('',#454060,1.); +#454060 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#454061 = ORIENTED_EDGE('',*,*,#454062,.T.); +#454062 = EDGE_CURVE('',#454055,#454063,#454065,.T.); +#454063 = VERTEX_POINT('',#454064); +#454064 = CARTESIAN_POINT('',(151.810667,-149.655946,-7.5E-02)); +#454065 = LINE('',#454066,#454067); +#454066 = CARTESIAN_POINT('',(151.927392,-149.71355,-7.5E-02)); +#454067 = VECTOR('',#454068,1.); +#454068 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#454069 = ORIENTED_EDGE('',*,*,#454070,.T.); +#454070 = EDGE_CURVE('',#454063,#454071,#454073,.T.); +#454071 = VERTEX_POINT('',#454072); +#454072 = CARTESIAN_POINT('',(151.798705,-149.640534,-7.5E-02)); +#454073 = LINE('',#454074,#454075); +#454074 = CARTESIAN_POINT('',(151.810667,-149.655946,-7.5E-02)); +#454075 = VECTOR('',#454076,1.); +#454076 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#454077 = ORIENTED_EDGE('',*,*,#454078,.T.); +#454078 = EDGE_CURVE('',#454071,#454079,#454081,.T.); +#454079 = VERTEX_POINT('',#454080); +#454080 = CARTESIAN_POINT('',(151.74805,-149.534208,-7.5E-02)); +#454081 = LINE('',#454082,#454083); +#454082 = CARTESIAN_POINT('',(151.798705,-149.640534,-7.5E-02)); +#454083 = VECTOR('',#454084,1.); +#454084 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#454085 = ORIENTED_EDGE('',*,*,#454086,.T.); +#454086 = EDGE_CURVE('',#454079,#454087,#454089,.T.); +#454087 = VERTEX_POINT('',#454088); +#454088 = CARTESIAN_POINT('',(151.74805,-149.368806,-7.5E-02)); +#454089 = LINE('',#454090,#454091); +#454090 = CARTESIAN_POINT('',(151.74805,-149.534208,-7.5E-02)); +#454091 = VECTOR('',#454092,1.); +#454092 = DIRECTION('',(0.,1.,0.)); +#454093 = ORIENTED_EDGE('',*,*,#454094,.T.); +#454094 = EDGE_CURVE('',#454087,#454095,#454097,.T.); +#454095 = VERTEX_POINT('',#454096); +#454096 = CARTESIAN_POINT('',(151.787191,-149.285508,-7.5E-02)); +#454097 = LINE('',#454098,#454099); +#454098 = CARTESIAN_POINT('',(151.74805,-149.368806,-7.5E-02)); +#454099 = VECTOR('',#454100,1.); +#454100 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#454101 = ORIENTED_EDGE('',*,*,#454102,.T.); +#454102 = EDGE_CURVE('',#454095,#453962,#454103,.T.); +#454103 = LINE('',#454104,#454105); +#454104 = CARTESIAN_POINT('',(151.787191,-149.285508,-7.5E-02)); +#454105 = VECTOR('',#454106,1.); +#454106 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#454107 = PLANE('',#454108); +#454108 = AXIS2_PLACEMENT_3D('',#454109,#454110,#454111); +#454109 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#454110 = DIRECTION('',(-0.,-0.,-1.)); +#454111 = DIRECTION('',(-1.,0.,0.)); +#454112 = SHELL_BASED_SURFACE_MODEL('',(#454113)); +#454113 = OPEN_SHELL('',(#454114)); +#454114 = ADVANCED_FACE('',(#454115,#454295),#454346,.T.); +#454115 = FACE_BOUND('',#454116,.T.); +#454116 = EDGE_LOOP('',(#454117,#454127,#454135,#454143,#454151,#454159, + #454167,#454175,#454183,#454192,#454200,#454208,#454216,#454224, + #454232,#454240,#454248,#454256,#454264,#454272,#454280,#454289)); +#454117 = ORIENTED_EDGE('',*,*,#454118,.T.); +#454118 = EDGE_CURVE('',#454119,#454121,#454123,.T.); +#454119 = VERTEX_POINT('',#454120); +#454120 = CARTESIAN_POINT('',(153.43101,-148.906785,-7.5E-02)); +#454121 = VERTEX_POINT('',#454122); +#454122 = CARTESIAN_POINT('',(153.537336,-148.856129,-7.5E-02)); +#454123 = LINE('',#454124,#454125); +#454124 = CARTESIAN_POINT('',(153.43101,-148.906785,-7.5E-02)); +#454125 = VECTOR('',#454126,1.); +#454126 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#454127 = ORIENTED_EDGE('',*,*,#454128,.T.); +#454128 = EDGE_CURVE('',#454121,#454129,#454131,.T.); +#454129 = VERTEX_POINT('',#454130); +#454130 = CARTESIAN_POINT('',(153.932017,-148.854375,-7.5E-02)); +#454131 = LINE('',#454132,#454133); +#454132 = CARTESIAN_POINT('',(153.537336,-148.856129,-7.5E-02)); +#454133 = VECTOR('',#454134,1.); +#454134 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#454135 = ORIENTED_EDGE('',*,*,#454136,.T.); +#454136 = EDGE_CURVE('',#454129,#454137,#454139,.T.); +#454137 = VERTEX_POINT('',#454138); +#454138 = CARTESIAN_POINT('',(153.951921,-148.859166,-7.5E-02)); +#454139 = LINE('',#454140,#454141); +#454140 = CARTESIAN_POINT('',(153.932017,-148.854375,-7.5E-02)); +#454141 = VECTOR('',#454142,1.); +#454142 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#454143 = ORIENTED_EDGE('',*,*,#454144,.T.); +#454144 = EDGE_CURVE('',#454137,#454145,#454147,.T.); +#454145 = VERTEX_POINT('',#454146); +#454146 = CARTESIAN_POINT('',(154.059751,-148.916556,-7.5E-02)); +#454147 = LINE('',#454148,#454149); +#454148 = CARTESIAN_POINT('',(153.951921,-148.859166,-7.5E-02)); +#454149 = VECTOR('',#454150,1.); +#454150 = DIRECTION('',(0.882758259515,-0.469827473928,0.)); +#454151 = ORIENTED_EDGE('',*,*,#454152,.T.); +#454152 = EDGE_CURVE('',#454145,#454153,#454155,.T.); +#454153 = VERTEX_POINT('',#454154); +#454154 = CARTESIAN_POINT('',(154.118613,-149.02761,-7.5E-02)); +#454155 = LINE('',#454156,#454157); +#454156 = CARTESIAN_POINT('',(154.059751,-148.916556,-7.5E-02)); +#454157 = VECTOR('',#454158,1.); +#454158 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#454159 = ORIENTED_EDGE('',*,*,#454160,.T.); +#454160 = EDGE_CURVE('',#454153,#454161,#454163,.T.); +#454161 = VERTEX_POINT('',#454162); +#454162 = CARTESIAN_POINT('',(154.122419,-149.046744,-7.5E-02)); +#454163 = LINE('',#454164,#454165); +#454164 = CARTESIAN_POINT('',(154.118613,-149.02761,-7.5E-02)); +#454165 = VECTOR('',#454166,1.); +#454166 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#454167 = ORIENTED_EDGE('',*,*,#454168,.T.); +#454168 = EDGE_CURVE('',#454161,#454169,#454171,.T.); +#454169 = VERTEX_POINT('',#454170); +#454170 = CARTESIAN_POINT('',(154.120176,-149.248492,-7.5E-02)); +#454171 = LINE('',#454172,#454173); +#454172 = CARTESIAN_POINT('',(154.122419,-149.046744,-7.5E-02)); +#454173 = VECTOR('',#454174,1.); +#454174 = DIRECTION('',(-1.111714311208E-02,-0.999938202655,0.)); +#454175 = ORIENTED_EDGE('',*,*,#454176,.T.); +#454176 = EDGE_CURVE('',#454169,#454177,#454179,.T.); +#454177 = VERTEX_POINT('',#454178); +#454178 = CARTESIAN_POINT('',(154.069521,-149.354819,-7.5E-02)); +#454179 = LINE('',#454180,#454181); +#454180 = CARTESIAN_POINT('',(154.120176,-149.248492,-7.5E-02)); +#454181 = VECTOR('',#454182,1.); +#454182 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#454183 = ORIENTED_EDGE('',*,*,#454184,.T.); +#454184 = EDGE_CURVE('',#454177,#454185,#454187,.T.); +#454185 = VERTEX_POINT('',#454186); +#454186 = CARTESIAN_POINT('',(153.980079,-149.310097,-7.5E-02)); +#454187 = CIRCLE('',#454188,4.999982161968E-02); +#454188 = AXIS2_PLACEMENT_3D('',#454189,#454190,#454191); +#454189 = CARTESIAN_POINT('',(154.02479999642,-149.3324580071,-7.5E-02) + ); +#454190 = DIRECTION('',(-0.,0.,-1.)); +#454191 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#454192 = ORIENTED_EDGE('',*,*,#454193,.T.); +#454193 = EDGE_CURVE('',#454185,#454194,#454196,.T.); +#454194 = VERTEX_POINT('',#454195); +#454195 = CARTESIAN_POINT('',(154.022419,-149.225416,-7.5E-02)); +#454196 = LINE('',#454197,#454198); +#454197 = CARTESIAN_POINT('',(153.980079,-149.310097,-7.5E-02)); +#454198 = VECTOR('',#454199,1.); +#454199 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#454200 = ORIENTED_EDGE('',*,*,#454201,.T.); +#454201 = EDGE_CURVE('',#454194,#454202,#454204,.T.); +#454202 = VERTEX_POINT('',#454203); +#454203 = CARTESIAN_POINT('',(154.022419,-149.058547,-7.5E-02)); +#454204 = LINE('',#454205,#454206); +#454205 = CARTESIAN_POINT('',(154.022419,-149.225416,-7.5E-02)); +#454206 = VECTOR('',#454207,1.); +#454207 = DIRECTION('',(0.,1.,0.)); +#454208 = ORIENTED_EDGE('',*,*,#454209,.T.); +#454209 = EDGE_CURVE('',#454202,#454210,#454212,.T.); +#454210 = VERTEX_POINT('',#454211); +#454211 = CARTESIAN_POINT('',(153.987532,-148.988773,-7.5E-02)); +#454212 = LINE('',#454213,#454214); +#454213 = CARTESIAN_POINT('',(154.022419,-149.058547,-7.5E-02)); +#454214 = VECTOR('',#454215,1.); +#454215 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#454216 = ORIENTED_EDGE('',*,*,#454217,.T.); +#454217 = EDGE_CURVE('',#454210,#454218,#454220,.T.); +#454218 = VERTEX_POINT('',#454219); +#454219 = CARTESIAN_POINT('',(153.917759,-148.953887,-7.5E-02)); +#454220 = LINE('',#454221,#454222); +#454221 = CARTESIAN_POINT('',(153.987532,-148.988773,-7.5E-02)); +#454222 = VECTOR('',#454223,1.); +#454223 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#454224 = ORIENTED_EDGE('',*,*,#454225,.T.); +#454225 = EDGE_CURVE('',#454218,#454226,#454228,.T.); +#454226 = VERTEX_POINT('',#454227); +#454227 = CARTESIAN_POINT('',(153.780075,-148.953887,-7.5E-02)); +#454228 = LINE('',#454229,#454230); +#454229 = CARTESIAN_POINT('',(153.917759,-148.953887,-7.5E-02)); +#454230 = VECTOR('',#454231,1.); +#454231 = DIRECTION('',(-1.,0.,0.)); +#454232 = ORIENTED_EDGE('',*,*,#454233,.T.); +#454233 = EDGE_CURVE('',#454226,#454234,#454236,.T.); +#454234 = VERTEX_POINT('',#454235); +#454235 = CARTESIAN_POINT('',(153.688261,-149.40099,-7.5E-02)); +#454236 = LINE('',#454237,#454238); +#454237 = CARTESIAN_POINT('',(153.780075,-148.953887,-7.5E-02)); +#454238 = VECTOR('',#454239,1.); +#454239 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#454240 = ORIENTED_EDGE('',*,*,#454241,.T.); +#454241 = EDGE_CURVE('',#454234,#454242,#454244,.T.); +#454242 = VERTEX_POINT('',#454243); +#454243 = CARTESIAN_POINT('',(153.662981,-149.426271,-7.5E-02)); +#454244 = LINE('',#454245,#454246); +#454245 = CARTESIAN_POINT('',(153.688261,-149.40099,-7.5E-02)); +#454246 = VECTOR('',#454247,1.); +#454247 = DIRECTION('',(-0.707092795827,-0.70712076627,0.)); +#454248 = ORIENTED_EDGE('',*,*,#454249,.T.); +#454249 = EDGE_CURVE('',#454242,#454250,#454252,.T.); +#454250 = VERTEX_POINT('',#454251); +#454251 = CARTESIAN_POINT('',(153.643847,-149.430077,-7.5E-02)); +#454252 = LINE('',#454253,#454254); +#454253 = CARTESIAN_POINT('',(153.662981,-149.426271,-7.5E-02)); +#454254 = VECTOR('',#454255,1.); +#454255 = DIRECTION('',(-0.980785174845,-0.195090852694,0.)); +#454256 = ORIENTED_EDGE('',*,*,#454257,.T.); +#454257 = EDGE_CURVE('',#454250,#454258,#454260,.T.); +#454258 = VERTEX_POINT('',#454259); +#454259 = CARTESIAN_POINT('',(153.537336,-149.427834,-7.5E-02)); +#454260 = LINE('',#454261,#454262); +#454261 = CARTESIAN_POINT('',(153.643847,-149.430077,-7.5E-02)); +#454262 = VECTOR('',#454263,1.); +#454263 = DIRECTION('',(-0.999778335979,2.105418977967E-02,0.)); +#454264 = ORIENTED_EDGE('',*,*,#454265,.T.); +#454265 = EDGE_CURVE('',#454258,#454266,#454268,.T.); +#454266 = VERTEX_POINT('',#454267); +#454267 = CARTESIAN_POINT('',(153.420611,-149.37023,-7.5E-02)); +#454268 = LINE('',#454269,#454270); +#454269 = CARTESIAN_POINT('',(153.537336,-149.427834,-7.5E-02)); +#454270 = VECTOR('',#454271,1.); +#454271 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#454272 = ORIENTED_EDGE('',*,*,#454273,.T.); +#454273 = EDGE_CURVE('',#454266,#454274,#454276,.T.); +#454274 = VERTEX_POINT('',#454275); +#454275 = CARTESIAN_POINT('',(153.408649,-149.354818,-7.5E-02)); +#454276 = LINE('',#454277,#454278); +#454277 = CARTESIAN_POINT('',(153.420611,-149.37023,-7.5E-02)); +#454278 = VECTOR('',#454279,1.); +#454279 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#454280 = ORIENTED_EDGE('',*,*,#454281,.T.); +#454281 = EDGE_CURVE('',#454274,#454282,#454284,.T.); +#454282 = VERTEX_POINT('',#454283); +#454283 = CARTESIAN_POINT('',(153.415598,-148.918746,-7.5E-02)); +#454284 = CIRCLE('',#454285,0.376597301495); +#454285 = AXIS2_PLACEMENT_3D('',#454286,#454287,#454288); +#454286 = CARTESIAN_POINT('',(153.71912484267,-149.141674202,-7.5E-02)); +#454287 = DIRECTION('',(0.,0.,-1.)); +#454288 = DIRECTION('',(-0.824423970765,-0.565972717035,-0.)); +#454289 = ORIENTED_EDGE('',*,*,#454290,.T.); +#454290 = EDGE_CURVE('',#454282,#454119,#454291,.T.); +#454291 = LINE('',#454292,#454293); +#454292 = CARTESIAN_POINT('',(153.415598,-148.918746,-7.5E-02)); +#454293 = VECTOR('',#454294,1.); +#454294 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#454295 = FACE_BOUND('',#454296,.T.); +#454296 = EDGE_LOOP('',(#454297,#454307,#454315,#454323,#454332,#454340) + ); +#454297 = ORIENTED_EDGE('',*,*,#454298,.T.); +#454298 = EDGE_CURVE('',#454299,#454301,#454303,.T.); +#454299 = VERTEX_POINT('',#454300); +#454300 = CARTESIAN_POINT('',(153.602857,-149.330077,-7.5E-02)); +#454301 = VERTEX_POINT('',#454302); +#454302 = CARTESIAN_POINT('',(153.678095,-148.953887,-7.5E-02)); +#454303 = LINE('',#454304,#454305); +#454304 = CARTESIAN_POINT('',(153.602857,-149.330077,-7.5E-02)); +#454305 = VECTOR('',#454306,1.); +#454306 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#454307 = ORIENTED_EDGE('',*,*,#454308,.T.); +#454308 = EDGE_CURVE('',#454301,#454309,#454311,.T.); +#454309 = VERTEX_POINT('',#454310); +#454310 = CARTESIAN_POINT('',(153.560413,-148.953887,-7.5E-02)); +#454311 = LINE('',#454312,#454313); +#454312 = CARTESIAN_POINT('',(153.678095,-148.953887,-7.5E-02)); +#454313 = VECTOR('',#454314,1.); +#454314 = DIRECTION('',(-1.,0.,0.)); +#454315 = ORIENTED_EDGE('',*,*,#454316,.T.); +#454316 = EDGE_CURVE('',#454309,#454317,#454319,.T.); +#454317 = VERTEX_POINT('',#454318); +#454318 = CARTESIAN_POINT('',(153.490638,-148.988773,-7.5E-02)); +#454319 = LINE('',#454320,#454321); +#454320 = CARTESIAN_POINT('',(153.560413,-148.953887,-7.5E-02)); +#454321 = VECTOR('',#454322,1.); +#454322 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#454323 = ORIENTED_EDGE('',*,*,#454324,.T.); +#454324 = EDGE_CURVE('',#454317,#454325,#454327,.T.); +#454325 = VERTEX_POINT('',#454326); +#454326 = CARTESIAN_POINT('',(153.490638,-149.29519,-7.5E-02)); +#454327 = CIRCLE('',#454328,0.26744056971); +#454328 = AXIS2_PLACEMENT_3D('',#454329,#454330,#454331); +#454329 = CARTESIAN_POINT('',(153.70984478332,-149.1419815,-7.5E-02)); +#454330 = DIRECTION('',(0.,0.,1.)); +#454331 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#454332 = ORIENTED_EDGE('',*,*,#454333,.T.); +#454333 = EDGE_CURVE('',#454325,#454334,#454336,.T.); +#454334 = VERTEX_POINT('',#454335); +#454335 = CARTESIAN_POINT('',(153.560413,-149.330077,-7.5E-02)); +#454336 = LINE('',#454337,#454338); +#454337 = CARTESIAN_POINT('',(153.490638,-149.29519,-7.5E-02)); +#454338 = VECTOR('',#454339,1.); +#454339 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#454340 = ORIENTED_EDGE('',*,*,#454341,.T.); +#454341 = EDGE_CURVE('',#454334,#454299,#454342,.T.); +#454342 = LINE('',#454343,#454344); +#454343 = CARTESIAN_POINT('',(153.560413,-149.330077,-7.5E-02)); +#454344 = VECTOR('',#454345,1.); +#454345 = DIRECTION('',(1.,0.,0.)); +#454346 = PLANE('',#454347); +#454347 = AXIS2_PLACEMENT_3D('',#454348,#454349,#454350); +#454348 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#454349 = DIRECTION('',(-0.,-0.,-1.)); +#454350 = DIRECTION('',(-1.,0.,0.)); +#454351 = SHELL_BASED_SURFACE_MODEL('',(#454352)); +#454352 = OPEN_SHELL('',(#454353)); +#454353 = ADVANCED_FACE('',(#454354,#454559),#454626,.T.); +#454354 = FACE_BOUND('',#454355,.T.); +#454355 = EDGE_LOOP('',(#454356,#454366,#454374,#454382,#454390,#454398, + #454406,#454414,#454422,#454430,#454439,#454447,#454455,#454463, + #454472,#454480,#454489,#454497,#454505,#454513,#454521,#454529, + #454537,#454545,#454553)); +#454356 = ORIENTED_EDGE('',*,*,#454357,.T.); +#454357 = EDGE_CURVE('',#454358,#454360,#454362,.T.); +#454358 = VERTEX_POINT('',#454359); +#454359 = CARTESIAN_POINT('',(152.10678,-148.287739,-7.5E-02)); +#454360 = VERTEX_POINT('',#454361); +#454361 = CARTESIAN_POINT('',(152.213106,-148.237083,-7.5E-02)); +#454362 = LINE('',#454363,#454364); +#454363 = CARTESIAN_POINT('',(152.10678,-148.287739,-7.5E-02)); +#454364 = VECTOR('',#454365,1.); +#454365 = DIRECTION('',(0.902779519658,0.430103637377,0.)); +#454366 = ORIENTED_EDGE('',*,*,#454367,.T.); +#454367 = EDGE_CURVE('',#454360,#454368,#454370,.T.); +#454368 = VERTEX_POINT('',#454369); +#454369 = CARTESIAN_POINT('',(152.322073,-148.235329,-7.5E-02)); +#454370 = LINE('',#454371,#454372); +#454371 = CARTESIAN_POINT('',(152.213106,-148.237083,-7.5E-02)); +#454372 = VECTOR('',#454373,1.); +#454373 = DIRECTION('',(0.99987047464,1.609453148681E-02,0.)); +#454374 = ORIENTED_EDGE('',*,*,#454375,.T.); +#454375 = EDGE_CURVE('',#454368,#454376,#454378,.T.); +#454376 = VERTEX_POINT('',#454377); +#454377 = CARTESIAN_POINT('',(152.341977,-148.24012,-7.5E-02)); +#454378 = LINE('',#454379,#454380); +#454379 = CARTESIAN_POINT('',(152.322073,-148.235329,-7.5E-02)); +#454380 = VECTOR('',#454381,1.); +#454381 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#454382 = ORIENTED_EDGE('',*,*,#454383,.T.); +#454383 = EDGE_CURVE('',#454376,#454384,#454386,.T.); +#454384 = VERTEX_POINT('',#454385); +#454385 = CARTESIAN_POINT('',(152.449807,-148.29751,-7.5E-02)); +#454386 = LINE('',#454387,#454388); +#454387 = CARTESIAN_POINT('',(152.341977,-148.24012,-7.5E-02)); +#454388 = VECTOR('',#454389,1.); +#454389 = DIRECTION('',(0.882758259516,-0.469827473928,0.)); +#454390 = ORIENTED_EDGE('',*,*,#454391,.T.); +#454391 = EDGE_CURVE('',#454384,#454392,#454394,.T.); +#454392 = VERTEX_POINT('',#454393); +#454393 = CARTESIAN_POINT('',(152.508669,-148.408564,-7.5E-02)); +#454394 = LINE('',#454395,#454396); +#454395 = CARTESIAN_POINT('',(152.449807,-148.29751,-7.5E-02)); +#454396 = VECTOR('',#454397,1.); +#454397 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#454398 = ORIENTED_EDGE('',*,*,#454399,.T.); +#454399 = EDGE_CURVE('',#454392,#454400,#454402,.T.); +#454400 = VERTEX_POINT('',#454401); +#454401 = CARTESIAN_POINT('',(152.512475,-148.427698,-7.5E-02)); +#454402 = LINE('',#454403,#454404); +#454403 = CARTESIAN_POINT('',(152.508669,-148.408564,-7.5E-02)); +#454404 = VECTOR('',#454405,1.); +#454405 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#454406 = ORIENTED_EDGE('',*,*,#454407,.T.); +#454407 = EDGE_CURVE('',#454400,#454408,#454410,.T.); +#454408 = VERTEX_POINT('',#454409); +#454409 = CARTESIAN_POINT('',(152.510232,-148.677065,-7.5E-02)); +#454410 = LINE('',#454411,#454412); +#454411 = CARTESIAN_POINT('',(152.512475,-148.427698,-7.5E-02)); +#454412 = VECTOR('',#454413,1.); +#454413 = DIRECTION('',(-8.994410926263E-03,-0.999959549468,0.)); +#454414 = ORIENTED_EDGE('',*,*,#454415,.T.); +#454415 = EDGE_CURVE('',#454408,#454416,#454418,.T.); +#454416 = VERTEX_POINT('',#454417); +#454417 = CARTESIAN_POINT('',(152.489772,-148.723,-7.5E-02)); +#454418 = LINE('',#454419,#454420); +#454419 = CARTESIAN_POINT('',(152.510232,-148.677065,-7.5E-02)); +#454420 = VECTOR('',#454421,1.); +#454421 = DIRECTION('',(-0.406876386712,-0.91348322696,0.)); +#454422 = ORIENTED_EDGE('',*,*,#454423,.T.); +#454423 = EDGE_CURVE('',#454416,#454424,#454426,.T.); +#454424 = VERTEX_POINT('',#454425); +#454425 = CARTESIAN_POINT('',(152.508669,-148.741897,-7.5E-02)); +#454426 = LINE('',#454427,#454428); +#454427 = CARTESIAN_POINT('',(152.489772,-148.723,-7.5E-02)); +#454428 = VECTOR('',#454429,1.); +#454429 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#454430 = ORIENTED_EDGE('',*,*,#454431,.T.); +#454431 = EDGE_CURVE('',#454424,#454432,#454434,.T.); +#454432 = VERTEX_POINT('',#454433); +#454433 = CARTESIAN_POINT('',(152.462475,-148.811031,-7.5E-02)); +#454434 = CIRCLE('',#454435,5.000000000004E-02); +#454435 = AXIS2_PLACEMENT_3D('',#454436,#454437,#454438); +#454436 = CARTESIAN_POINT('',(152.46247495228,-148.761031,-7.5E-02)); +#454437 = DIRECTION('',(0.,0.,-1.)); +#454438 = DIRECTION('',(0.923880954236,0.38268,0.)); +#454439 = ORIENTED_EDGE('',*,*,#454440,.T.); +#454440 = EDGE_CURVE('',#454432,#454441,#454443,.T.); +#454441 = VERTEX_POINT('',#454442); +#454442 = CARTESIAN_POINT('',(151.927392,-148.808788,-7.5E-02)); +#454443 = LINE('',#454444,#454445); +#454444 = CARTESIAN_POINT('',(152.462475,-148.811031,-7.5E-02)); +#454445 = VECTOR('',#454446,1.); +#454446 = DIRECTION('',(-0.999991214216,4.191836207668E-03,0.)); +#454447 = ORIENTED_EDGE('',*,*,#454448,.T.); +#454448 = EDGE_CURVE('',#454441,#454449,#454451,.T.); +#454449 = VERTEX_POINT('',#454450); +#454450 = CARTESIAN_POINT('',(151.810667,-148.751184,-7.5E-02)); +#454451 = LINE('',#454452,#454453); +#454452 = CARTESIAN_POINT('',(151.927392,-148.808788,-7.5E-02)); +#454453 = VECTOR('',#454454,1.); +#454454 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#454455 = ORIENTED_EDGE('',*,*,#454456,.T.); +#454456 = EDGE_CURVE('',#454449,#454457,#454459,.T.); +#454457 = VERTEX_POINT('',#454458); +#454458 = CARTESIAN_POINT('',(151.798705,-148.735772,-7.5E-02)); +#454459 = LINE('',#454460,#454461); +#454460 = CARTESIAN_POINT('',(151.810667,-148.751184,-7.5E-02)); +#454461 = VECTOR('',#454462,1.); +#454462 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#454463 = ORIENTED_EDGE('',*,*,#454464,.T.); +#454464 = EDGE_CURVE('',#454457,#454465,#454467,.T.); +#454465 = VERTEX_POINT('',#454466); +#454466 = CARTESIAN_POINT('',(151.798705,-148.3101,-7.5E-02)); +#454467 = CIRCLE('',#454468,0.375890473252); +#454468 = AXIS2_PLACEMENT_3D('',#454469,#454470,#454471); +#454469 = CARTESIAN_POINT('',(152.10853476775,-148.522936,-7.5E-02)); +#454470 = DIRECTION('',(0.,0.,-1.)); +#454471 = DIRECTION('',(-0.824255440879,-0.56621812774,-0.)); +#454472 = ORIENTED_EDGE('',*,*,#454473,.T.); +#454473 = EDGE_CURVE('',#454465,#454474,#454476,.T.); +#454474 = VERTEX_POINT('',#454475); +#454475 = CARTESIAN_POINT('',(151.810667,-148.294688,-7.5E-02)); +#454476 = LINE('',#454477,#454478); +#454477 = CARTESIAN_POINT('',(151.798705,-148.3101,-7.5E-02)); +#454478 = VECTOR('',#454479,1.); +#454479 = DIRECTION('',(0.613138319011,0.789975570357,0.)); +#454480 = ORIENTED_EDGE('',*,*,#454481,.T.); +#454481 = EDGE_CURVE('',#454474,#454482,#454484,.T.); +#454482 = VERTEX_POINT('',#454483); +#454483 = CARTESIAN_POINT('',(151.888148,-148.354821,-7.5E-02)); +#454484 = CIRCLE('',#454485,4.999967912486E-02); +#454485 = AXIS2_PLACEMENT_3D('',#454486,#454487,#454488); +#454486 = CARTESIAN_POINT('',(151.8434269736,-148.3324603714,-7.5E-02)); +#454487 = DIRECTION('',(0.,0.,-1.)); +#454488 = DIRECTION('',(-0.655203676927,0.755452276283,0.)); +#454489 = ORIENTED_EDGE('',*,*,#454490,.T.); +#454490 = EDGE_CURVE('',#454482,#454491,#454493,.T.); +#454491 = VERTEX_POINT('',#454492); +#454492 = CARTESIAN_POINT('',(151.845808,-148.439501,-7.5E-02)); +#454493 = LINE('',#454494,#454495); +#454494 = CARTESIAN_POINT('',(151.888148,-148.354821,-7.5E-02)); +#454495 = VECTOR('',#454496,1.); +#454496 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#454497 = ORIENTED_EDGE('',*,*,#454498,.T.); +#454498 = EDGE_CURVE('',#454491,#454499,#454501,.T.); +#454499 = VERTEX_POINT('',#454500); +#454500 = CARTESIAN_POINT('',(151.845808,-148.606371,-7.5E-02)); +#454501 = LINE('',#454502,#454503); +#454502 = CARTESIAN_POINT('',(151.845808,-148.439501,-7.5E-02)); +#454503 = VECTOR('',#454504,1.); +#454504 = DIRECTION('',(0.,-1.,0.)); +#454505 = ORIENTED_EDGE('',*,*,#454506,.T.); +#454506 = EDGE_CURVE('',#454499,#454507,#454509,.T.); +#454507 = VERTEX_POINT('',#454508); +#454508 = CARTESIAN_POINT('',(151.880694,-148.676144,-7.5E-02)); +#454509 = LINE('',#454510,#454511); +#454510 = CARTESIAN_POINT('',(151.845808,-148.606371,-7.5E-02)); +#454511 = VECTOR('',#454512,1.); +#454512 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#454513 = ORIENTED_EDGE('',*,*,#454514,.T.); +#454514 = EDGE_CURVE('',#454507,#454515,#454517,.T.); +#454515 = VERTEX_POINT('',#454516); +#454516 = CARTESIAN_POINT('',(151.950469,-148.711031,-7.5E-02)); +#454517 = LINE('',#454518,#454519); +#454518 = CARTESIAN_POINT('',(151.880694,-148.676144,-7.5E-02)); +#454519 = VECTOR('',#454520,1.); +#454520 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#454521 = ORIENTED_EDGE('',*,*,#454522,.T.); +#454522 = EDGE_CURVE('',#454515,#454523,#454525,.T.); +#454523 = VERTEX_POINT('',#454524); +#454524 = CARTESIAN_POINT('',(152.003001,-148.711031,-7.5E-02)); +#454525 = LINE('',#454526,#454527); +#454526 = CARTESIAN_POINT('',(151.950469,-148.711031,-7.5E-02)); +#454527 = VECTOR('',#454528,1.); +#454528 = DIRECTION('',(1.,0.,0.)); +#454529 = ORIENTED_EDGE('',*,*,#454530,.T.); +#454530 = EDGE_CURVE('',#454523,#454531,#454533,.T.); +#454531 = VERTEX_POINT('',#454532); +#454532 = CARTESIAN_POINT('',(152.031522,-148.653989,-7.5E-02)); +#454533 = LINE('',#454534,#454535); +#454534 = CARTESIAN_POINT('',(152.003001,-148.711031,-7.5E-02)); +#454535 = VECTOR('',#454536,1.); +#454536 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#454537 = ORIENTED_EDGE('',*,*,#454538,.T.); +#454538 = EDGE_CURVE('',#454531,#454539,#454541,.T.); +#454539 = VERTEX_POINT('',#454540); +#454540 = CARTESIAN_POINT('',(152.033764,-148.416425,-7.5E-02)); +#454541 = LINE('',#454542,#454543); +#454542 = CARTESIAN_POINT('',(152.031522,-148.653989,-7.5E-02)); +#454543 = VECTOR('',#454544,1.); +#454544 = DIRECTION('',(9.437036605445E-03,0.999955470179,0.)); +#454545 = ORIENTED_EDGE('',*,*,#454546,.T.); +#454546 = EDGE_CURVE('',#454539,#454547,#454549,.T.); +#454547 = VERTEX_POINT('',#454548); +#454548 = CARTESIAN_POINT('',(152.091368,-148.2997,-7.5E-02)); +#454549 = LINE('',#454550,#454551); +#454550 = CARTESIAN_POINT('',(152.033764,-148.416425,-7.5E-02)); +#454551 = VECTOR('',#454552,1.); +#454552 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#454553 = ORIENTED_EDGE('',*,*,#454554,.T.); +#454554 = EDGE_CURVE('',#454547,#454358,#454555,.T.); +#454555 = LINE('',#454556,#454557); +#454556 = CARTESIAN_POINT('',(152.091368,-148.2997,-7.5E-02)); +#454557 = VECTOR('',#454558,1.); +#454558 = DIRECTION('',(0.790000397634,0.61310632988,0.)); +#454559 = FACE_BOUND('',#454560,.T.); +#454560 = EDGE_LOOP('',(#454561,#454572,#454580,#454588,#454596,#454604, + #454612,#454620)); +#454561 = ORIENTED_EDGE('',*,*,#454562,.T.); +#454562 = EDGE_CURVE('',#454563,#454565,#454567,.T.); +#454563 = VERTEX_POINT('',#454564); +#454564 = CARTESIAN_POINT('',(152.377588,-148.369727,-7.5E-02)); +#454565 = VERTEX_POINT('',#454566); +#454566 = CARTESIAN_POINT('',(152.166408,-148.369727,-7.5E-02)); +#454567 = CIRCLE('',#454568,0.162841435032); +#454568 = AXIS2_PLACEMENT_3D('',#454569,#454570,#454571); +#454569 = CARTESIAN_POINT('',(152.271998,-148.49369508,-7.5E-02)); +#454570 = DIRECTION('',(0.,0.,1.)); +#454571 = DIRECTION('',(0.648422190453,0.761280935613,-0.)); +#454572 = ORIENTED_EDGE('',*,*,#454573,.T.); +#454573 = EDGE_CURVE('',#454565,#454574,#454576,.T.); +#454574 = VERTEX_POINT('',#454575); +#454575 = CARTESIAN_POINT('',(152.131522,-148.439501,-7.5E-02)); +#454576 = LINE('',#454577,#454578); +#454577 = CARTESIAN_POINT('',(152.166408,-148.369727,-7.5E-02)); +#454578 = VECTOR('',#454579,1.); +#454579 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#454580 = ORIENTED_EDGE('',*,*,#454581,.T.); +#454581 = EDGE_CURVE('',#454574,#454582,#454584,.T.); +#454582 = VERTEX_POINT('',#454583); +#454583 = CARTESIAN_POINT('',(152.129279,-148.677065,-7.5E-02)); +#454584 = LINE('',#454585,#454586); +#454585 = CARTESIAN_POINT('',(152.131522,-148.439501,-7.5E-02)); +#454586 = VECTOR('',#454587,1.); +#454587 = DIRECTION('',(-9.441245434874E-03,-0.999955430449,0.)); +#454588 = ORIENTED_EDGE('',*,*,#454589,.T.); +#454589 = EDGE_CURVE('',#454582,#454590,#454592,.T.); +#454590 = VERTEX_POINT('',#454591); +#454591 = CARTESIAN_POINT('',(152.114804,-148.711031,-7.5E-02)); +#454592 = LINE('',#454593,#454594); +#454593 = CARTESIAN_POINT('',(152.129279,-148.677065,-7.5E-02)); +#454594 = VECTOR('',#454595,1.); +#454595 = DIRECTION('',(-0.392045460213,-0.91994584467,0.)); +#454596 = ORIENTED_EDGE('',*,*,#454597,.T.); +#454597 = EDGE_CURVE('',#454590,#454598,#454600,.T.); +#454598 = VERTEX_POINT('',#454599); +#454599 = CARTESIAN_POINT('',(152.383954,-148.711031,-7.5E-02)); +#454600 = LINE('',#454601,#454602); +#454601 = CARTESIAN_POINT('',(152.114804,-148.711031,-7.5E-02)); +#454602 = VECTOR('',#454603,1.); +#454603 = DIRECTION('',(1.,0.,0.)); +#454604 = ORIENTED_EDGE('',*,*,#454605,.T.); +#454605 = EDGE_CURVE('',#454598,#454606,#454608,.T.); +#454606 = VERTEX_POINT('',#454607); +#454607 = CARTESIAN_POINT('',(152.412475,-148.653989,-7.5E-02)); +#454608 = LINE('',#454609,#454610); +#454609 = CARTESIAN_POINT('',(152.383954,-148.711031,-7.5E-02)); +#454610 = VECTOR('',#454611,1.); +#454611 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#454612 = ORIENTED_EDGE('',*,*,#454613,.T.); +#454613 = EDGE_CURVE('',#454606,#454614,#454616,.T.); +#454614 = VERTEX_POINT('',#454615); +#454615 = CARTESIAN_POINT('',(152.412475,-148.439501,-7.5E-02)); +#454616 = LINE('',#454617,#454618); +#454617 = CARTESIAN_POINT('',(152.412475,-148.653989,-7.5E-02)); +#454618 = VECTOR('',#454619,1.); +#454619 = DIRECTION('',(0.,1.,0.)); +#454620 = ORIENTED_EDGE('',*,*,#454621,.T.); +#454621 = EDGE_CURVE('',#454614,#454563,#454622,.T.); +#454622 = LINE('',#454623,#454624); +#454623 = CARTESIAN_POINT('',(152.412475,-148.439501,-7.5E-02)); +#454624 = VECTOR('',#454625,1.); +#454625 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#454626 = PLANE('',#454627); +#454627 = AXIS2_PLACEMENT_3D('',#454628,#454629,#454630); +#454628 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#454629 = DIRECTION('',(-0.,-0.,-1.)); +#454630 = DIRECTION('',(-1.,0.,0.)); +#454631 = SHELL_BASED_SURFACE_MODEL('',(#454632)); +#454632 = OPEN_SHELL('',(#454633)); +#454633 = ADVANCED_FACE('',(#454634,#455220,#455406,#455464,#455498, + #455548,#455582,#455616,#455650,#455684,#455718,#455768,#455818), + #456020,.T.); +#454634 = FACE_BOUND('',#454635,.T.); +#454635 = EDGE_LOOP('',(#454636,#454646,#454654,#454662,#454670,#454678, + #454686,#454694,#454702,#454710,#454718,#454726,#454734,#454742, + #454750,#454758,#454766,#454774,#454782,#454790,#454798,#454806, + #454814,#454822,#454830,#454838,#454846,#454854,#454862,#454870, + #454878,#454886,#454894,#454902,#454910,#454918,#454926,#454934, + #454942,#454950,#454958,#454966,#454974,#454982,#454990,#454998, + #455006,#455014,#455022,#455030,#455038,#455046,#455054,#455062, + #455070,#455078,#455086,#455094,#455102,#455110,#455118,#455126, + #455134,#455142,#455150,#455158,#455166,#455174,#455182,#455190, + #455198,#455206,#455214)); +#454636 = ORIENTED_EDGE('',*,*,#454637,.T.); +#454637 = EDGE_CURVE('',#454638,#454640,#454642,.T.); +#454638 = VERTEX_POINT('',#454639); +#454639 = CARTESIAN_POINT('',(146.148773,-138.112799,-7.5E-02)); +#454640 = VERTEX_POINT('',#454641); +#454641 = CARTESIAN_POINT('',(146.164198,-137.028104,-7.5E-02)); +#454642 = LINE('',#454643,#454644); +#454643 = CARTESIAN_POINT('',(146.148773,-138.112799,-7.5E-02)); +#454644 = VECTOR('',#454645,1.); +#454645 = DIRECTION('',(1.42191496922E-02,0.999898902781,0.)); +#454646 = ORIENTED_EDGE('',*,*,#454647,.T.); +#454647 = EDGE_CURVE('',#454640,#454648,#454650,.T.); +#454648 = VERTEX_POINT('',#454649); +#454649 = CARTESIAN_POINT('',(146.172503,-136.934025,-7.5E-02)); +#454650 = LINE('',#454651,#454652); +#454651 = CARTESIAN_POINT('',(146.164198,-137.028104,-7.5E-02)); +#454652 = VECTOR('',#454653,1.); +#454653 = DIRECTION('',(8.793490875394E-02,0.996126222836,0.)); +#454654 = ORIENTED_EDGE('',*,*,#454655,.T.); +#454655 = EDGE_CURVE('',#454648,#454656,#454658,.T.); +#454656 = VERTEX_POINT('',#454657); +#454657 = CARTESIAN_POINT('',(146.231781,-137.399426,-7.5E-02)); +#454658 = LINE('',#454659,#454660); +#454659 = CARTESIAN_POINT('',(146.172503,-136.934025,-7.5E-02)); +#454660 = VECTOR('',#454661,1.); +#454661 = DIRECTION('',(0.126348971191,-0.991985855483,0.)); +#454662 = ORIENTED_EDGE('',*,*,#454663,.T.); +#454663 = EDGE_CURVE('',#454656,#454664,#454666,.T.); +#454664 = VERTEX_POINT('',#454665); +#454665 = CARTESIAN_POINT('',(146.425249,-139.20755,-7.5E-02)); +#454666 = LINE('',#454667,#454668); +#454667 = CARTESIAN_POINT('',(146.231781,-137.399426,-7.5E-02)); +#454668 = VECTOR('',#454669,1.); +#454669 = DIRECTION('',(0.10639199898,-0.994324264289,0.)); +#454670 = ORIENTED_EDGE('',*,*,#454671,.T.); +#454671 = EDGE_CURVE('',#454664,#454672,#454674,.T.); +#454672 = VERTEX_POINT('',#454673); +#454673 = CARTESIAN_POINT('',(146.652318,-141.421665,-7.5E-02)); +#454674 = LINE('',#454675,#454676); +#454675 = CARTESIAN_POINT('',(146.425249,-139.20755,-7.5E-02)); +#454676 = VECTOR('',#454677,1.); +#454677 = DIRECTION('',(0.102020098616,-0.994782337739,0.)); +#454678 = ORIENTED_EDGE('',*,*,#454679,.T.); +#454679 = EDGE_CURVE('',#454672,#454680,#454682,.T.); +#454680 = VERTEX_POINT('',#454681); +#454681 = CARTESIAN_POINT('',(147.654338,-142.566951,-7.5E-02)); +#454682 = LINE('',#454683,#454684); +#454683 = CARTESIAN_POINT('',(146.652318,-141.421665,-7.5E-02)); +#454684 = VECTOR('',#454685,1.); +#454685 = DIRECTION('',(0.658465434572,-0.752610969541,0.)); +#454686 = ORIENTED_EDGE('',*,*,#454687,.T.); +#454687 = EDGE_CURVE('',#454680,#454688,#454690,.T.); +#454688 = VERTEX_POINT('',#454689); +#454689 = CARTESIAN_POINT('',(147.8102,-142.759346,-7.5E-02)); +#454690 = LINE('',#454691,#454692); +#454691 = CARTESIAN_POINT('',(147.654338,-142.566951,-7.5E-02)); +#454692 = VECTOR('',#454693,1.); +#454693 = DIRECTION('',(0.629475512612,-0.777020320855,0.)); +#454694 = ORIENTED_EDGE('',*,*,#454695,.T.); +#454695 = EDGE_CURVE('',#454688,#454696,#454698,.T.); +#454696 = VERTEX_POINT('',#454697); +#454697 = CARTESIAN_POINT('',(147.805834,-142.768203,-7.5E-02)); +#454698 = LINE('',#454699,#454700); +#454699 = CARTESIAN_POINT('',(147.8102,-142.759346,-7.5E-02)); +#454700 = VECTOR('',#454701,1.); +#454701 = DIRECTION('',(-0.442142950585,-0.896944597647,0.)); +#454702 = ORIENTED_EDGE('',*,*,#454703,.T.); +#454703 = EDGE_CURVE('',#454696,#454704,#454706,.T.); +#454704 = VERTEX_POINT('',#454705); +#454705 = CARTESIAN_POINT('',(147.619129,-142.99842,-7.5E-02)); +#454706 = LINE('',#454707,#454708); +#454707 = CARTESIAN_POINT('',(147.805834,-142.768203,-7.5E-02)); +#454708 = VECTOR('',#454709,1.); +#454709 = DIRECTION('',(-0.629888601913,-0.77668548923,0.)); +#454710 = ORIENTED_EDGE('',*,*,#454711,.T.); +#454711 = EDGE_CURVE('',#454704,#454712,#454714,.T.); +#454712 = VERTEX_POINT('',#454713); +#454713 = CARTESIAN_POINT('',(147.222526,-143.452215,-7.5E-02)); +#454714 = LINE('',#454715,#454716); +#454715 = CARTESIAN_POINT('',(147.619129,-142.99842,-7.5E-02)); +#454716 = VECTOR('',#454717,1.); +#454717 = DIRECTION('',(-0.658065042962,-0.752961087462,0.)); +#454718 = ORIENTED_EDGE('',*,*,#454719,.T.); +#454719 = EDGE_CURVE('',#454712,#454720,#454722,.T.); +#454720 = VERTEX_POINT('',#454721); +#454721 = CARTESIAN_POINT('',(148.201785,-144.92142,-7.5E-02)); +#454722 = LINE('',#454723,#454724); +#454723 = CARTESIAN_POINT('',(147.222526,-143.452215,-7.5E-02)); +#454724 = VECTOR('',#454725,1.); +#454725 = DIRECTION('',(0.554617460711,-0.832105445406,0.)); +#454726 = ORIENTED_EDGE('',*,*,#454727,.T.); +#454727 = EDGE_CURVE('',#454720,#454728,#454730,.T.); +#454728 = VERTEX_POINT('',#454729); +#454729 = CARTESIAN_POINT('',(150.018975,-145.386364,-7.5E-02)); +#454730 = LINE('',#454731,#454732); +#454731 = CARTESIAN_POINT('',(148.201785,-144.92142,-7.5E-02)); +#454732 = VECTOR('',#454733,1.); +#454733 = DIRECTION('',(0.968792278696,-0.247874001742,0.)); +#454734 = ORIENTED_EDGE('',*,*,#454735,.T.); +#454735 = EDGE_CURVE('',#454728,#454736,#454738,.T.); +#454736 = VERTEX_POINT('',#454737); +#454737 = CARTESIAN_POINT('',(149.988698,-145.835689,-7.5E-02)); +#454738 = LINE('',#454739,#454740); +#454739 = CARTESIAN_POINT('',(150.018975,-145.386364,-7.5E-02)); +#454740 = VECTOR('',#454741,1.); +#454741 = DIRECTION('',(-6.723083892572E-02,-0.997737447577,0.)); +#454742 = ORIENTED_EDGE('',*,*,#454743,.T.); +#454743 = EDGE_CURVE('',#454736,#454744,#454746,.T.); +#454744 = VERTEX_POINT('',#454745); +#454745 = CARTESIAN_POINT('',(149.911672,-147.483257,-7.5E-02)); +#454746 = LINE('',#454747,#454748); +#454747 = CARTESIAN_POINT('',(149.988698,-145.835689,-7.5E-02)); +#454748 = VECTOR('',#454749,1.); +#454749 = DIRECTION('',(-4.670032458139E-02,-0.998908944641,0.)); +#454750 = ORIENTED_EDGE('',*,*,#454751,.T.); +#454751 = EDGE_CURVE('',#454744,#454752,#454754,.T.); +#454752 = VERTEX_POINT('',#454753); +#454753 = CARTESIAN_POINT('',(149.908437,-147.514285,-7.5E-02)); +#454754 = LINE('',#454755,#454756); +#454755 = CARTESIAN_POINT('',(149.911672,-147.483257,-7.5E-02)); +#454756 = VECTOR('',#454757,1.); +#454757 = DIRECTION('',(-0.103698574559,-0.994608770138,0.)); +#454758 = ORIENTED_EDGE('',*,*,#454759,.T.); +#454759 = EDGE_CURVE('',#454752,#454760,#454762,.T.); +#454760 = VERTEX_POINT('',#454761); +#454761 = CARTESIAN_POINT('',(149.038588,-147.304057,-7.5E-02)); +#454762 = LINE('',#454763,#454764); +#454763 = CARTESIAN_POINT('',(149.908437,-147.514285,-7.5E-02)); +#454764 = VECTOR('',#454765,1.); +#454765 = DIRECTION('',(-0.972014766004,0.234919762197,0.)); +#454766 = ORIENTED_EDGE('',*,*,#454767,.T.); +#454767 = EDGE_CURVE('',#454760,#454768,#454770,.T.); +#454768 = VERTEX_POINT('',#454769); +#454769 = CARTESIAN_POINT('',(147.877913,-147.007689,-7.5E-02)); +#454770 = LINE('',#454771,#454772); +#454771 = CARTESIAN_POINT('',(149.038588,-147.304057,-7.5E-02)); +#454772 = VECTOR('',#454773,1.); +#454773 = DIRECTION('',(-0.9689126187,0.247403187782,0.)); +#454774 = ORIENTED_EDGE('',*,*,#454775,.T.); +#454775 = EDGE_CURVE('',#454768,#454776,#454778,.T.); +#454776 = VERTEX_POINT('',#454777); +#454777 = CARTESIAN_POINT('',(147.846299,-146.997791,-7.5E-02)); +#454778 = LINE('',#454779,#454780); +#454779 = CARTESIAN_POINT('',(147.877913,-147.007689,-7.5E-02)); +#454780 = VECTOR('',#454781,1.); +#454781 = DIRECTION('',(-0.954319776323,0.298787155881,0.)); +#454782 = ORIENTED_EDGE('',*,*,#454783,.T.); +#454783 = EDGE_CURVE('',#454776,#454784,#454786,.T.); +#454784 = VERTEX_POINT('',#454785); +#454785 = CARTESIAN_POINT('',(147.870133,-146.299302,-7.5E-02)); +#454786 = LINE('',#454787,#454788); +#454787 = CARTESIAN_POINT('',(147.846299,-146.997791,-7.5E-02)); +#454788 = VECTOR('',#454789,1.); +#454789 = DIRECTION('',(3.410237931825E-02,0.999418344701,0.)); +#454790 = ORIENTED_EDGE('',*,*,#454791,.T.); +#454791 = EDGE_CURVE('',#454784,#454792,#454794,.T.); +#454792 = VERTEX_POINT('',#454793); +#454793 = CARTESIAN_POINT('',(147.923092,-145.152403,-7.5E-02)); +#454794 = LINE('',#454795,#454796); +#454795 = CARTESIAN_POINT('',(147.870133,-146.299302,-7.5E-02)); +#454796 = VECTOR('',#454797,1.); +#454797 = DIRECTION('',(4.612666884653E-02,0.998935598736,0.)); +#454798 = ORIENTED_EDGE('',*,*,#454799,.T.); +#454799 = EDGE_CURVE('',#454792,#454800,#454802,.T.); +#454800 = VERTEX_POINT('',#454801); +#454801 = CARTESIAN_POINT('',(147.183526,-144.247094,-7.5E-02)); +#454802 = LINE('',#454803,#454804); +#454803 = CARTESIAN_POINT('',(147.923092,-145.152403,-7.5E-02)); +#454804 = VECTOR('',#454805,1.); +#454805 = DIRECTION('',(-0.632652756757,0.774435594074,0.)); +#454806 = ORIENTED_EDGE('',*,*,#454807,.T.); +#454807 = EDGE_CURVE('',#454800,#454808,#454810,.T.); +#454808 = VERTEX_POINT('',#454809); +#454809 = CARTESIAN_POINT('',(147.08208,-144.131052,-7.5E-02)); +#454810 = LINE('',#454811,#454812); +#454811 = CARTESIAN_POINT('',(147.183526,-144.247094,-7.5E-02)); +#454812 = VECTOR('',#454813,1.); +#454813 = DIRECTION('',(-0.658171076863,0.752868403893,0.)); +#454814 = ORIENTED_EDGE('',*,*,#454815,.T.); +#454815 = EDGE_CURVE('',#454808,#454816,#454818,.T.); +#454816 = VERTEX_POINT('',#454817); +#454817 = CARTESIAN_POINT('',(147.00369,-144.052081,-7.5E-02)); +#454818 = LINE('',#454819,#454820); +#454819 = CARTESIAN_POINT('',(147.08208,-144.131052,-7.5E-02)); +#454820 = VECTOR('',#454821,1.); +#454821 = DIRECTION('',(-0.704491236975,0.709712686251,0.)); +#454822 = ORIENTED_EDGE('',*,*,#454823,.T.); +#454823 = EDGE_CURVE('',#454816,#454824,#454826,.T.); +#454824 = VERTEX_POINT('',#454825); +#454825 = CARTESIAN_POINT('',(146.941608,-144.003559,-7.5E-02)); +#454826 = LINE('',#454827,#454828); +#454827 = CARTESIAN_POINT('',(147.00369,-144.052081,-7.5E-02)); +#454828 = VECTOR('',#454829,1.); +#454829 = DIRECTION('',(-0.787898522196,0.615805097999,0.)); +#454830 = ORIENTED_EDGE('',*,*,#454831,.T.); +#454831 = EDGE_CURVE('',#454824,#454832,#454834,.T.); +#454832 = VERTEX_POINT('',#454833); +#454833 = CARTESIAN_POINT('',(146.889083,-143.978863,-7.5E-02)); +#454834 = LINE('',#454835,#454836); +#454835 = CARTESIAN_POINT('',(146.941608,-144.003559,-7.5E-02)); +#454836 = VECTOR('',#454837,1.); +#454837 = DIRECTION('',(-0.904962341012,0.425491670131,0.)); +#454838 = ORIENTED_EDGE('',*,*,#454839,.T.); +#454839 = EDGE_CURVE('',#454832,#454840,#454842,.T.); +#454840 = VERTEX_POINT('',#454841); +#454841 = CARTESIAN_POINT('',(146.807802,-143.964642,-7.5E-02)); +#454842 = LINE('',#454843,#454844); +#454843 = CARTESIAN_POINT('',(146.889083,-143.978863,-7.5E-02)); +#454844 = VECTOR('',#454845,1.); +#454845 = DIRECTION('',(-0.985036999929,0.172342997453,0.)); +#454846 = ORIENTED_EDGE('',*,*,#454847,.T.); +#454847 = EDGE_CURVE('',#454840,#454848,#454850,.T.); +#454848 = VERTEX_POINT('',#454849); +#454849 = CARTESIAN_POINT('',(146.736063,-143.989342,-7.5E-02)); +#454850 = LINE('',#454851,#454852); +#454851 = CARTESIAN_POINT('',(146.807802,-143.964642,-7.5E-02)); +#454852 = VECTOR('',#454853,1.); +#454853 = DIRECTION('',(-0.945525548345,-0.325547903429,0.)); +#454854 = ORIENTED_EDGE('',*,*,#454855,.T.); +#454855 = EDGE_CURVE('',#454848,#454856,#454858,.T.); +#454856 = VERTEX_POINT('',#454857); +#454857 = CARTESIAN_POINT('',(146.678104,-144.066581,-7.5E-02)); +#454858 = LINE('',#454859,#454860); +#454859 = CARTESIAN_POINT('',(146.736063,-143.989342,-7.5E-02)); +#454860 = VECTOR('',#454861,1.); +#454861 = DIRECTION('',(-0.600197151393,-0.799852098491,0.)); +#454862 = ORIENTED_EDGE('',*,*,#454863,.T.); +#454863 = EDGE_CURVE('',#454856,#454864,#454866,.T.); +#454864 = VERTEX_POINT('',#454865); +#454865 = CARTESIAN_POINT('',(146.649592,-144.216816,-7.5E-02)); +#454866 = LINE('',#454867,#454868); +#454867 = CARTESIAN_POINT('',(146.678104,-144.066581,-7.5E-02)); +#454868 = VECTOR('',#454869,1.); +#454869 = DIRECTION('',(-0.186454565984,-0.982463584477,0.)); +#454870 = ORIENTED_EDGE('',*,*,#454871,.T.); +#454871 = EDGE_CURVE('',#454864,#454872,#454874,.T.); +#454872 = VERTEX_POINT('',#454873); +#454873 = CARTESIAN_POINT('',(146.579374,-144.797377,-7.5E-02)); +#454874 = LINE('',#454875,#454876); +#454875 = CARTESIAN_POINT('',(146.649592,-144.216816,-7.5E-02)); +#454876 = VECTOR('',#454877,1.); +#454877 = DIRECTION('',(-0.120073469218,-0.992765008444,0.)); +#454878 = ORIENTED_EDGE('',*,*,#454879,.T.); +#454879 = EDGE_CURVE('',#454872,#454880,#454882,.T.); +#454880 = VERTEX_POINT('',#454881); +#454881 = CARTESIAN_POINT('',(146.53065,-145.312212,-7.5E-02)); +#454882 = LINE('',#454883,#454884); +#454883 = CARTESIAN_POINT('',(146.579374,-144.797377,-7.5E-02)); +#454884 = VECTOR('',#454885,1.); +#454885 = DIRECTION('',(-9.421902348267E-02,-0.995551493201,0.)); +#454886 = ORIENTED_EDGE('',*,*,#454887,.T.); +#454887 = EDGE_CURVE('',#454880,#454888,#454890,.T.); +#454888 = VERTEX_POINT('',#454889); +#454889 = CARTESIAN_POINT('',(146.518129,-145.526823,-7.5E-02)); +#454890 = LINE('',#454891,#454892); +#454891 = CARTESIAN_POINT('',(146.53065,-145.312212,-7.5E-02)); +#454892 = VECTOR('',#454893,1.); +#454893 = DIRECTION('',(-5.824372593219E-02,-0.99830239326,0.)); +#454894 = ORIENTED_EDGE('',*,*,#454895,.T.); +#454895 = EDGE_CURVE('',#454888,#454896,#454898,.T.); +#454896 = VERTEX_POINT('',#454897); +#454897 = CARTESIAN_POINT('',(146.523183,-145.568889,-7.5E-02)); +#454898 = LINE('',#454899,#454900); +#454899 = CARTESIAN_POINT('',(146.518129,-145.526823,-7.5E-02)); +#454900 = VECTOR('',#454901,1.); +#454901 = DIRECTION('',(0.119286685082,-0.992859852528,0.)); +#454902 = ORIENTED_EDGE('',*,*,#454903,.T.); +#454903 = EDGE_CURVE('',#454896,#454904,#454906,.T.); +#454904 = VERTEX_POINT('',#454905); +#454905 = CARTESIAN_POINT('',(147.580998,-147.032995,-7.5E-02)); +#454906 = LINE('',#454907,#454908); +#454907 = CARTESIAN_POINT('',(146.523183,-145.568889,-7.5E-02)); +#454908 = VECTOR('',#454909,1.); +#454909 = DIRECTION('',(0.585637942214,-0.810572760854,0.)); +#454910 = ORIENTED_EDGE('',*,*,#454911,.T.); +#454911 = EDGE_CURVE('',#454904,#454912,#454914,.T.); +#454912 = VERTEX_POINT('',#454913); +#454913 = CARTESIAN_POINT('',(147.577889,-147.044975,-7.5E-02)); +#454914 = LINE('',#454915,#454916); +#454915 = CARTESIAN_POINT('',(147.580998,-147.032995,-7.5E-02)); +#454916 = VECTOR('',#454917,1.); +#454917 = DIRECTION('',(-0.251194881505,-0.967936532788,0.)); +#454918 = ORIENTED_EDGE('',*,*,#454919,.T.); +#454919 = EDGE_CURVE('',#454912,#454920,#454922,.T.); +#454920 = VERTEX_POINT('',#454921); +#454921 = CARTESIAN_POINT('',(147.542247,-147.098282,-7.5E-02)); +#454922 = LINE('',#454923,#454924); +#454923 = CARTESIAN_POINT('',(147.577889,-147.044975,-7.5E-02)); +#454924 = VECTOR('',#454925,1.); +#454925 = DIRECTION('',(-0.555822501898,-0.83130099626,0.)); +#454926 = ORIENTED_EDGE('',*,*,#454927,.T.); +#454927 = EDGE_CURVE('',#454920,#454928,#454930,.T.); +#454928 = VERTEX_POINT('',#454929); +#454929 = CARTESIAN_POINT('',(147.366023,-147.314814,-7.5E-02)); +#454930 = LINE('',#454931,#454932); +#454931 = CARTESIAN_POINT('',(147.542247,-147.098282,-7.5E-02)); +#454932 = VECTOR('',#454933,1.); +#454933 = DIRECTION('',(-0.631221893284,-0.775602295922,0.)); +#454934 = ORIENTED_EDGE('',*,*,#454935,.T.); +#454935 = EDGE_CURVE('',#454928,#454936,#454938,.T.); +#454936 = VERTEX_POINT('',#454937); +#454937 = CARTESIAN_POINT('',(146.8848,-147.86038,-7.5E-02)); +#454938 = LINE('',#454939,#454940); +#454939 = CARTESIAN_POINT('',(147.366023,-147.314814,-7.5E-02)); +#454940 = VECTOR('',#454941,1.); +#454941 = DIRECTION('',(-0.661498920631,-0.749946116734,0.)); +#454942 = ORIENTED_EDGE('',*,*,#454943,.T.); +#454943 = EDGE_CURVE('',#454936,#454944,#454946,.T.); +#454944 = VERTEX_POINT('',#454945); +#454945 = CARTESIAN_POINT('',(146.16781,-148.653362,-7.5E-02)); +#454946 = LINE('',#454947,#454948); +#454947 = CARTESIAN_POINT('',(146.8848,-147.86038,-7.5E-02)); +#454948 = VECTOR('',#454949,1.); +#454949 = DIRECTION('',(-0.670671591543,-0.741754417781,0.)); +#454950 = ORIENTED_EDGE('',*,*,#454951,.T.); +#454951 = EDGE_CURVE('',#454944,#454952,#454954,.T.); +#454952 = VERTEX_POINT('',#454953); +#454953 = CARTESIAN_POINT('',(145.871659,-148.25889,-7.5E-02)); +#454954 = LINE('',#454955,#454956); +#454955 = CARTESIAN_POINT('',(146.16781,-148.653362,-7.5E-02)); +#454956 = VECTOR('',#454957,1.); +#454957 = DIRECTION('',(-0.600385278523,0.799710896095,0.)); +#454958 = ORIENTED_EDGE('',*,*,#454959,.T.); +#454959 = EDGE_CURVE('',#454952,#454960,#454962,.T.); +#454960 = VERTEX_POINT('',#454961); +#454961 = CARTESIAN_POINT('',(145.151137,-147.256892,-7.5E-02)); +#454962 = LINE('',#454963,#454964); +#454963 = CARTESIAN_POINT('',(145.871659,-148.25889,-7.5E-02)); +#454964 = VECTOR('',#454965,1.); +#454965 = DIRECTION('',(-0.583815513611,0.811886350462,0.)); +#454966 = ORIENTED_EDGE('',*,*,#454967,.T.); +#454967 = EDGE_CURVE('',#454960,#454968,#454970,.T.); +#454968 = VERTEX_POINT('',#454969); +#454969 = CARTESIAN_POINT('',(144.921806,-146.921689,-7.5E-02)); +#454970 = LINE('',#454971,#454972); +#454971 = CARTESIAN_POINT('',(145.151137,-147.256892,-7.5E-02)); +#454972 = VECTOR('',#454973,1.); +#454973 = DIRECTION('',(-0.56465302187,0.82532839821,0.)); +#454974 = ORIENTED_EDGE('',*,*,#454975,.T.); +#454975 = EDGE_CURVE('',#454968,#454976,#454978,.T.); +#454976 = VERTEX_POINT('',#454977); +#454977 = CARTESIAN_POINT('',(145.026324,-146.789342,-7.5E-02)); +#454978 = LINE('',#454979,#454980); +#454979 = CARTESIAN_POINT('',(144.921806,-146.921689,-7.5E-02)); +#454980 = VECTOR('',#454981,1.); +#454981 = DIRECTION('',(0.619766751849,0.784786068494,0.)); +#454982 = ORIENTED_EDGE('',*,*,#454983,.T.); +#454983 = EDGE_CURVE('',#454976,#454984,#454986,.T.); +#454984 = VERTEX_POINT('',#454985); +#454985 = CARTESIAN_POINT('',(145.531401,-146.217745,-7.5E-02)); +#454986 = LINE('',#454987,#454988); +#454987 = CARTESIAN_POINT('',(145.026324,-146.789342,-7.5E-02)); +#454988 = VECTOR('',#454989,1.); +#454989 = DIRECTION('',(0.662157137703,0.749365014522,0.)); +#454990 = ORIENTED_EDGE('',*,*,#454991,.T.); +#454991 = EDGE_CURVE('',#454984,#454992,#454994,.T.); +#454992 = VERTEX_POINT('',#454993); +#454993 = CARTESIAN_POINT('',(146.140996,-145.543933,-7.5E-02)); +#454994 = LINE('',#454995,#454996); +#454995 = CARTESIAN_POINT('',(145.531401,-146.217745,-7.5E-02)); +#454996 = VECTOR('',#454997,1.); +#454997 = DIRECTION('',(0.670886437033,0.741560104513,0.)); +#454998 = ORIENTED_EDGE('',*,*,#454999,.T.); +#454999 = EDGE_CURVE('',#454992,#455000,#455002,.T.); +#455000 = VERTEX_POINT('',#455001); +#455001 = CARTESIAN_POINT('',(146.157563,-143.778184,-7.5E-02)); +#455002 = LINE('',#455003,#455004); +#455003 = CARTESIAN_POINT('',(146.140996,-145.543933,-7.5E-02)); +#455004 = VECTOR('',#455005,1.); +#455005 = DIRECTION('',(9.382007778652E-03,0.999955987996,0.)); +#455006 = ORIENTED_EDGE('',*,*,#455007,.T.); +#455007 = EDGE_CURVE('',#455000,#455008,#455010,.T.); +#455008 = VERTEX_POINT('',#455009); +#455009 = CARTESIAN_POINT('',(145.480774,-143.60176,-7.5E-02)); +#455010 = LINE('',#455011,#455012); +#455011 = CARTESIAN_POINT('',(146.157563,-143.778184,-7.5E-02)); +#455012 = VECTOR('',#455013,1.); +#455013 = DIRECTION('',(-0.967662534189,0.252248329881,0.)); +#455014 = ORIENTED_EDGE('',*,*,#455015,.T.); +#455015 = EDGE_CURVE('',#455008,#455016,#455018,.T.); +#455016 = VERTEX_POINT('',#455017); +#455017 = CARTESIAN_POINT('',(145.38551,-143.573193,-7.5E-02)); +#455018 = LINE('',#455019,#455020); +#455019 = CARTESIAN_POINT('',(145.480774,-143.60176,-7.5E-02)); +#455020 = VECTOR('',#455021,1.); +#455021 = DIRECTION('',(-0.957860040584,0.28723534367,0.)); +#455022 = ORIENTED_EDGE('',*,*,#455023,.T.); +#455023 = EDGE_CURVE('',#455016,#455024,#455026,.T.); +#455024 = VERTEX_POINT('',#455025); +#455025 = CARTESIAN_POINT('',(145.326356,-143.549774,-7.5E-02)); +#455026 = LINE('',#455027,#455028); +#455027 = CARTESIAN_POINT('',(145.38551,-143.573193,-7.5E-02)); +#455028 = VECTOR('',#455029,1.); +#455029 = DIRECTION('',(-0.929785768202,0.368101107372,0.)); +#455030 = ORIENTED_EDGE('',*,*,#455031,.T.); +#455031 = EDGE_CURVE('',#455024,#455032,#455034,.T.); +#455032 = VERTEX_POINT('',#455033); +#455033 = CARTESIAN_POINT('',(145.294805,-143.527785,-7.5E-02)); +#455034 = LINE('',#455035,#455036); +#455035 = CARTESIAN_POINT('',(145.326356,-143.549774,-7.5E-02)); +#455036 = VECTOR('',#455037,1.); +#455037 = DIRECTION('',(-0.820411473249,0.57177356931,0.)); +#455038 = ORIENTED_EDGE('',*,*,#455039,.T.); +#455039 = EDGE_CURVE('',#455032,#455040,#455042,.T.); +#455040 = VERTEX_POINT('',#455041); +#455041 = CARTESIAN_POINT('',(145.282354,-143.503511,-7.5E-02)); +#455042 = LINE('',#455043,#455044); +#455043 = CARTESIAN_POINT('',(145.294805,-143.527785,-7.5E-02)); +#455044 = VECTOR('',#455045,1.); +#455045 = DIRECTION('',(-0.456397761044,0.889775861503,0.)); +#455046 = ORIENTED_EDGE('',*,*,#455047,.T.); +#455047 = EDGE_CURVE('',#455040,#455048,#455050,.T.); +#455048 = VERTEX_POINT('',#455049); +#455049 = CARTESIAN_POINT('',(145.284838,-143.423711,-7.5E-02)); +#455050 = LINE('',#455051,#455052); +#455051 = CARTESIAN_POINT('',(145.282354,-143.503511,-7.5E-02)); +#455052 = VECTOR('',#455053,1.); +#455053 = DIRECTION('',(3.111274998661E-02,0.999515881209,0.)); +#455054 = ORIENTED_EDGE('',*,*,#455055,.T.); +#455055 = EDGE_CURVE('',#455048,#455056,#455058,.T.); +#455056 = VERTEX_POINT('',#455057); +#455057 = CARTESIAN_POINT('',(145.3925,-142.591559,-7.5E-02)); +#455058 = LINE('',#455059,#455060); +#455059 = CARTESIAN_POINT('',(145.284838,-143.423711,-7.5E-02)); +#455060 = VECTOR('',#455061,1.); +#455061 = DIRECTION('',(0.128308409815,0.991734315213,0.)); +#455062 = ORIENTED_EDGE('',*,*,#455063,.T.); +#455063 = EDGE_CURVE('',#455056,#455064,#455066,.T.); +#455064 = VERTEX_POINT('',#455065); +#455065 = CARTESIAN_POINT('',(145.503138,-141.787573,-7.5E-02)); +#455066 = LINE('',#455067,#455068); +#455067 = CARTESIAN_POINT('',(145.3925,-142.591559,-7.5E-02)); +#455068 = VECTOR('',#455069,1.); +#455069 = DIRECTION('',(0.136327088355,0.990663880931,0.)); +#455070 = ORIENTED_EDGE('',*,*,#455071,.T.); +#455071 = EDGE_CURVE('',#455064,#455072,#455074,.T.); +#455072 = VERTEX_POINT('',#455073); +#455073 = CARTESIAN_POINT('',(143.744747,-138.433301,-7.5E-02)); +#455074 = LINE('',#455075,#455076); +#455075 = CARTESIAN_POINT('',(145.503138,-141.787573,-7.5E-02)); +#455076 = VECTOR('',#455077,1.); +#455077 = DIRECTION('',(-0.464295258469,0.885680480175,0.)); +#455078 = ORIENTED_EDGE('',*,*,#455079,.T.); +#455079 = EDGE_CURVE('',#455072,#455080,#455082,.T.); +#455080 = VERTEX_POINT('',#455081); +#455081 = CARTESIAN_POINT('',(143.44115,-137.828865,-7.5E-02)); +#455082 = LINE('',#455083,#455084); +#455083 = CARTESIAN_POINT('',(143.744747,-138.433301,-7.5E-02)); +#455084 = VECTOR('',#455085,1.); +#455085 = DIRECTION('',(-0.448843844796,0.893610207523,0.)); +#455086 = ORIENTED_EDGE('',*,*,#455087,.T.); +#455087 = EDGE_CURVE('',#455080,#455088,#455090,.T.); +#455088 = VERTEX_POINT('',#455089); +#455089 = CARTESIAN_POINT('',(143.398479,-137.724977,-7.5E-02)); +#455090 = LINE('',#455091,#455092); +#455091 = CARTESIAN_POINT('',(143.44115,-137.828865,-7.5E-02)); +#455092 = VECTOR('',#455093,1.); +#455093 = DIRECTION('',(-0.379939533347,0.925011324796,0.)); +#455094 = ORIENTED_EDGE('',*,*,#455095,.T.); +#455095 = EDGE_CURVE('',#455088,#455096,#455098,.T.); +#455096 = VERTEX_POINT('',#455097); +#455097 = CARTESIAN_POINT('',(143.39983,-137.713477,-7.5E-02)); +#455098 = LINE('',#455099,#455100); +#455099 = CARTESIAN_POINT('',(143.398479,-137.724977,-7.5E-02)); +#455100 = VECTOR('',#455101,1.); +#455101 = DIRECTION('',(0.116675889547,0.993170044251,0.)); +#455102 = ORIENTED_EDGE('',*,*,#455103,.T.); +#455103 = EDGE_CURVE('',#455096,#455104,#455106,.T.); +#455104 = VERTEX_POINT('',#455105); +#455105 = CARTESIAN_POINT('',(143.418529,-137.731112,-7.5E-02)); +#455106 = LINE('',#455107,#455108); +#455107 = CARTESIAN_POINT('',(143.39983,-137.713477,-7.5E-02)); +#455108 = VECTOR('',#455109,1.); +#455109 = DIRECTION('',(0.727501735833,-0.686105840494,0.)); +#455110 = ORIENTED_EDGE('',*,*,#455111,.T.); +#455111 = EDGE_CURVE('',#455104,#455112,#455114,.T.); +#455112 = VERTEX_POINT('',#455113); +#455113 = CARTESIAN_POINT('',(146.093692,-141.748965,-7.5E-02)); +#455114 = LINE('',#455115,#455116); +#455115 = CARTESIAN_POINT('',(143.418529,-137.731112,-7.5E-02)); +#455116 = VECTOR('',#455117,1.); +#455117 = DIRECTION('',(0.554211643243,-0.832375789228,0.)); +#455118 = ORIENTED_EDGE('',*,*,#455119,.T.); +#455119 = EDGE_CURVE('',#455112,#455120,#455122,.T.); +#455120 = VERTEX_POINT('',#455121); +#455121 = CARTESIAN_POINT('',(145.891876,-143.061868,-7.5E-02)); +#455122 = LINE('',#455123,#455124); +#455123 = CARTESIAN_POINT('',(146.093692,-141.748965,-7.5E-02)); +#455124 = VECTOR('',#455125,1.); +#455125 = DIRECTION('',(-0.151932840149,-0.988390819506,0.)); +#455126 = ORIENTED_EDGE('',*,*,#455127,.T.); +#455127 = EDGE_CURVE('',#455120,#455128,#455130,.T.); +#455128 = VERTEX_POINT('',#455129); +#455129 = CARTESIAN_POINT('',(145.884305,-143.099289,-7.5E-02)); +#455130 = LINE('',#455131,#455132); +#455131 = CARTESIAN_POINT('',(145.891876,-143.061868,-7.5E-02)); +#455132 = VECTOR('',#455133,1.); +#455133 = DIRECTION('',(-0.198301695152,-0.980141029495,0.)); +#455134 = ORIENTED_EDGE('',*,*,#455135,.T.); +#455135 = EDGE_CURVE('',#455128,#455136,#455138,.T.); +#455136 = VERTEX_POINT('',#455137); +#455137 = CARTESIAN_POINT('',(145.904544,-143.117288,-7.5E-02)); +#455138 = LINE('',#455139,#455140); +#455139 = CARTESIAN_POINT('',(145.884305,-143.099289,-7.5E-02)); +#455140 = VECTOR('',#455141,1.); +#455141 = DIRECTION('',(0.747248371207,-0.664544860584,0.)); +#455142 = ORIENTED_EDGE('',*,*,#455143,.T.); +#455143 = EDGE_CURVE('',#455136,#455144,#455146,.T.); +#455144 = VERTEX_POINT('',#455145); +#455145 = CARTESIAN_POINT('',(145.974299,-143.145074,-7.5E-02)); +#455146 = LINE('',#455147,#455148); +#455147 = CARTESIAN_POINT('',(145.904544,-143.117288,-7.5E-02)); +#455148 = VECTOR('',#455149,1.); +#455149 = DIRECTION('',(0.929008462221,-0.370058477977,0.)); +#455150 = ORIENTED_EDGE('',*,*,#455151,.T.); +#455151 = EDGE_CURVE('',#455144,#455152,#455154,.T.); +#455152 = VERTEX_POINT('',#455153); +#455153 = CARTESIAN_POINT('',(146.227566,-143.215815,-7.5E-02)); +#455154 = LINE('',#455155,#455156); +#455155 = CARTESIAN_POINT('',(145.974299,-143.145074,-7.5E-02)); +#455156 = VECTOR('',#455157,1.); +#455157 = DIRECTION('',(0.963135392928,-0.269017127502,0.)); +#455158 = ORIENTED_EDGE('',*,*,#455159,.T.); +#455159 = EDGE_CURVE('',#455152,#455160,#455162,.T.); +#455160 = VERTEX_POINT('',#455161); +#455161 = CARTESIAN_POINT('',(146.582277,-143.301046,-7.5E-02)); +#455162 = LINE('',#455163,#455164); +#455163 = CARTESIAN_POINT('',(146.227566,-143.215815,-7.5E-02)); +#455164 = VECTOR('',#455165,1.); +#455165 = DIRECTION('',(0.972324838074,-0.233633065436,0.)); +#455166 = ORIENTED_EDGE('',*,*,#455167,.T.); +#455167 = EDGE_CURVE('',#455160,#455168,#455170,.T.); +#455168 = VERTEX_POINT('',#455169); +#455169 = CARTESIAN_POINT('',(146.963149,-142.887155,-7.5E-02)); +#455170 = LINE('',#455171,#455172); +#455171 = CARTESIAN_POINT('',(146.582277,-143.301046,-7.5E-02)); +#455172 = VECTOR('',#455173,1.); +#455173 = DIRECTION('',(0.677145381458,0.735849259271,0.)); +#455174 = ORIENTED_EDGE('',*,*,#455175,.T.); +#455175 = EDGE_CURVE('',#455168,#455176,#455178,.T.); +#455176 = VERTEX_POINT('',#455177); +#455177 = CARTESIAN_POINT('',(147.020031,-142.818957,-7.5E-02)); +#455178 = LINE('',#455179,#455180); +#455179 = CARTESIAN_POINT('',(146.963149,-142.887155,-7.5E-02)); +#455180 = VECTOR('',#455181,1.); +#455181 = DIRECTION('',(0.640518830724,0.767942463657,0.)); +#455182 = ORIENTED_EDGE('',*,*,#455183,.T.); +#455183 = EDGE_CURVE('',#455176,#455184,#455186,.T.); +#455184 = VERTEX_POINT('',#455185); +#455185 = CARTESIAN_POINT('',(147.05423,-142.76856,-7.5E-02)); +#455186 = LINE('',#455187,#455188); +#455187 = CARTESIAN_POINT('',(147.020031,-142.818957,-7.5E-02)); +#455188 = VECTOR('',#455189,1.); +#455189 = DIRECTION('',(0.561513062142,0.827467873119,0.)); +#455190 = ORIENTED_EDGE('',*,*,#455191,.T.); +#455191 = EDGE_CURVE('',#455184,#455192,#455194,.T.); +#455192 = VERTEX_POINT('',#455193); +#455193 = CARTESIAN_POINT('',(147.052004,-142.73351,-7.5E-02)); +#455194 = LINE('',#455195,#455196); +#455195 = CARTESIAN_POINT('',(147.05423,-142.76856,-7.5E-02)); +#455196 = VECTOR('',#455197,1.); +#455197 = DIRECTION('',(-6.338157859167E-02,0.997989366424,0.)); +#455198 = ORIENTED_EDGE('',*,*,#455199,.T.); +#455199 = EDGE_CURVE('',#455192,#455200,#455202,.T.); +#455200 = VERTEX_POINT('',#455201); +#455201 = CARTESIAN_POINT('',(146.676235,-142.316276,-7.5E-02)); +#455202 = LINE('',#455203,#455204); +#455203 = CARTESIAN_POINT('',(147.052004,-142.73351,-7.5E-02)); +#455204 = VECTOR('',#455205,1.); +#455205 = DIRECTION('',(-0.669218942633,0.743065277632,0.)); +#455206 = ORIENTED_EDGE('',*,*,#455207,.T.); +#455207 = EDGE_CURVE('',#455200,#455208,#455210,.T.); +#455208 = VERTEX_POINT('',#455209); +#455209 = CARTESIAN_POINT('',(146.142674,-141.73168,-7.5E-02)); +#455210 = LINE('',#455211,#455212); +#455211 = CARTESIAN_POINT('',(146.676235,-142.316276,-7.5E-02)); +#455212 = VECTOR('',#455213,1.); +#455213 = DIRECTION('',(-0.674131154813,0.738611661233,0.)); +#455214 = ORIENTED_EDGE('',*,*,#455215,.T.); +#455215 = EDGE_CURVE('',#455208,#454638,#455216,.T.); +#455216 = LINE('',#455217,#455218); +#455217 = CARTESIAN_POINT('',(146.142674,-141.73168,-7.5E-02)); +#455218 = VECTOR('',#455219,1.); +#455219 = DIRECTION('',(1.68532519816E-03,0.999998579838,0.)); +#455220 = FACE_BOUND('',#455221,.T.); +#455221 = EDGE_LOOP('',(#455222,#455232,#455240,#455248,#455256,#455264, + #455272,#455280,#455288,#455296,#455304,#455312,#455320,#455328, + #455336,#455344,#455352,#455360,#455368,#455376,#455384,#455392, + #455400)); +#455222 = ORIENTED_EDGE('',*,*,#455223,.T.); +#455223 = EDGE_CURVE('',#455224,#455226,#455228,.T.); +#455224 = VERTEX_POINT('',#455225); +#455225 = CARTESIAN_POINT('',(146.561331,-146.009896,-7.5E-02)); +#455226 = VERTEX_POINT('',#455227); +#455227 = CARTESIAN_POINT('',(146.342015,-145.726226,-7.5E-02)); +#455228 = LINE('',#455229,#455230); +#455229 = CARTESIAN_POINT('',(146.561331,-146.009896,-7.5E-02)); +#455230 = VECTOR('',#455231,1.); +#455231 = DIRECTION('',(-0.611650836219,0.791127837049,0.)); +#455232 = ORIENTED_EDGE('',*,*,#455233,.T.); +#455233 = EDGE_CURVE('',#455226,#455234,#455236,.T.); +#455234 = VERTEX_POINT('',#455235); +#455235 = CARTESIAN_POINT('',(146.319738,-145.703282,-7.5E-02)); +#455236 = LINE('',#455237,#455238); +#455237 = CARTESIAN_POINT('',(146.342015,-145.726226,-7.5E-02)); +#455238 = VECTOR('',#455239,1.); +#455239 = DIRECTION('',(-0.696601337794,0.717458414254,0.)); +#455240 = ORIENTED_EDGE('',*,*,#455241,.T.); +#455241 = EDGE_CURVE('',#455234,#455242,#455244,.T.); +#455242 = VERTEX_POINT('',#455243); +#455243 = CARTESIAN_POINT('',(146.299349,-145.716473,-7.5E-02)); +#455244 = LINE('',#455245,#455246); +#455245 = CARTESIAN_POINT('',(146.319738,-145.703282,-7.5E-02)); +#455246 = VECTOR('',#455247,1.); +#455247 = DIRECTION('',(-0.839605509342,-0.543196639057,0.)); +#455248 = ORIENTED_EDGE('',*,*,#455249,.T.); +#455249 = EDGE_CURVE('',#455242,#455250,#455252,.T.); +#455250 = VERTEX_POINT('',#455251); +#455251 = CARTESIAN_POINT('',(146.16227,-145.852465,-7.5E-02)); +#455252 = LINE('',#455253,#455254); +#455253 = CARTESIAN_POINT('',(146.299349,-145.716473,-7.5E-02)); +#455254 = VECTOR('',#455255,1.); +#455255 = DIRECTION('',(-0.709915901108,-0.704286456886,0.)); +#455256 = ORIENTED_EDGE('',*,*,#455257,.T.); +#455257 = EDGE_CURVE('',#455250,#455258,#455260,.T.); +#455258 = VERTEX_POINT('',#455259); +#455259 = CARTESIAN_POINT('',(145.816164,-146.231763,-7.5E-02)); +#455260 = LINE('',#455261,#455262); +#455261 = CARTESIAN_POINT('',(146.16227,-145.852465,-7.5E-02)); +#455262 = VECTOR('',#455263,1.); +#455263 = DIRECTION('',(-0.674046754474,-0.738688684618,0.)); +#455264 = ORIENTED_EDGE('',*,*,#455265,.T.); +#455265 = EDGE_CURVE('',#455258,#455266,#455268,.T.); +#455266 = VERTEX_POINT('',#455267); +#455267 = CARTESIAN_POINT('',(145.448324,-146.654803,-7.5E-02)); +#455268 = LINE('',#455269,#455270); +#455269 = CARTESIAN_POINT('',(145.816164,-146.231763,-7.5E-02)); +#455270 = VECTOR('',#455271,1.); +#455271 = DIRECTION('',(-0.656157516294,-0.754623955233,0.)); +#455272 = ORIENTED_EDGE('',*,*,#455273,.T.); +#455273 = EDGE_CURVE('',#455266,#455274,#455276,.T.); +#455274 = VERTEX_POINT('',#455275); +#455275 = CARTESIAN_POINT('',(145.272609,-146.86856,-7.5E-02)); +#455276 = LINE('',#455277,#455278); +#455277 = CARTESIAN_POINT('',(145.448324,-146.654803,-7.5E-02)); +#455278 = VECTOR('',#455279,1.); +#455279 = DIRECTION('',(-0.635017518148,-0.77249773569,0.)); +#455280 = ORIENTED_EDGE('',*,*,#455281,.T.); +#455281 = EDGE_CURVE('',#455274,#455282,#455284,.T.); +#455282 = VERTEX_POINT('',#455283); +#455283 = CARTESIAN_POINT('',(145.223962,-146.934129,-7.5E-02)); +#455284 = LINE('',#455285,#455286); +#455285 = CARTESIAN_POINT('',(145.272609,-146.86856,-7.5E-02)); +#455286 = VECTOR('',#455287,1.); +#455287 = DIRECTION('',(-0.595839279283,-0.803103700193,0.)); +#455288 = ORIENTED_EDGE('',*,*,#455289,.T.); +#455289 = EDGE_CURVE('',#455282,#455290,#455292,.T.); +#455290 = VERTEX_POINT('',#455291); +#455291 = CARTESIAN_POINT('',(145.209613,-146.962901,-7.5E-02)); +#455292 = LINE('',#455293,#455294); +#455293 = CARTESIAN_POINT('',(145.223962,-146.934129,-7.5E-02)); +#455294 = VECTOR('',#455295,1.); +#455295 = DIRECTION('',(-0.446292718518,-0.894887037228,0.)); +#455296 = ORIENTED_EDGE('',*,*,#455297,.T.); +#455297 = EDGE_CURVE('',#455290,#455298,#455300,.T.); +#455298 = VERTEX_POINT('',#455299); +#455299 = CARTESIAN_POINT('',(145.966773,-148.012193,-7.5E-02)); +#455300 = LINE('',#455301,#455302); +#455301 = CARTESIAN_POINT('',(145.209613,-146.962901,-7.5E-02)); +#455302 = VECTOR('',#455303,1.); +#455303 = DIRECTION('',(0.585154271677,-0.810921992758,0.)); +#455304 = ORIENTED_EDGE('',*,*,#455305,.T.); +#455305 = EDGE_CURVE('',#455298,#455306,#455308,.T.); +#455306 = VERTEX_POINT('',#455307); +#455307 = CARTESIAN_POINT('',(146.142232,-148.243489,-7.5E-02)); +#455308 = LINE('',#455309,#455310); +#455309 = CARTESIAN_POINT('',(145.966773,-148.012193,-7.5E-02)); +#455310 = VECTOR('',#455311,1.); +#455311 = DIRECTION('',(0.604371327994,-0.796702766343,0.)); +#455312 = ORIENTED_EDGE('',*,*,#455313,.T.); +#455313 = EDGE_CURVE('',#455306,#455314,#455316,.T.); +#455314 = VERTEX_POINT('',#455315); +#455315 = CARTESIAN_POINT('',(146.153691,-148.254099,-7.5E-02)); +#455316 = LINE('',#455317,#455318); +#455317 = CARTESIAN_POINT('',(146.142232,-148.243489,-7.5E-02)); +#455318 = VECTOR('',#455319,1.); +#455319 = DIRECTION('',(0.733766585557,-0.67940164698,0.)); +#455320 = ORIENTED_EDGE('',*,*,#455321,.T.); +#455321 = EDGE_CURVE('',#455314,#455322,#455324,.T.); +#455322 = VERTEX_POINT('',#455323); +#455323 = CARTESIAN_POINT('',(146.172,-148.260954,-7.5E-02)); +#455324 = LINE('',#455325,#455326); +#455325 = CARTESIAN_POINT('',(146.153691,-148.254099,-7.5E-02)); +#455326 = VECTOR('',#455327,1.); +#455327 = DIRECTION('',(0.936511930619,-0.350635713824,0.)); +#455328 = ORIENTED_EDGE('',*,*,#455329,.T.); +#455329 = EDGE_CURVE('',#455322,#455330,#455332,.T.); +#455330 = VERTEX_POINT('',#455331); +#455331 = CARTESIAN_POINT('',(146.196893,-148.254141,-7.5E-02)); +#455332 = LINE('',#455333,#455334); +#455333 = CARTESIAN_POINT('',(146.172,-148.260954,-7.5E-02)); +#455334 = VECTOR('',#455335,1.); +#455335 = DIRECTION('',(0.96452737474,0.263982846748,0.)); +#455336 = ORIENTED_EDGE('',*,*,#455337,.T.); +#455337 = EDGE_CURVE('',#455330,#455338,#455340,.T.); +#455338 = VERTEX_POINT('',#455339); +#455339 = CARTESIAN_POINT('',(146.233105,-148.229274,-7.5E-02)); +#455340 = LINE('',#455341,#455342); +#455341 = CARTESIAN_POINT('',(146.196893,-148.254141,-7.5E-02)); +#455342 = VECTOR('',#455343,1.); +#455343 = DIRECTION('',(0.82434734353,0.566084319881,0.)); +#455344 = ORIENTED_EDGE('',*,*,#455345,.T.); +#455345 = EDGE_CURVE('',#455338,#455346,#455348,.T.); +#455346 = VERTEX_POINT('',#455347); +#455347 = CARTESIAN_POINT('',(146.358419,-148.10783,-7.5E-02)); +#455348 = LINE('',#455349,#455350); +#455349 = CARTESIAN_POINT('',(146.233105,-148.229274,-7.5E-02)); +#455350 = VECTOR('',#455351,1.); +#455351 = DIRECTION('',(0.71810829645,0.695931372026,0.)); +#455352 = ORIENTED_EDGE('',*,*,#455353,.T.); +#455353 = EDGE_CURVE('',#455346,#455354,#455356,.T.); +#455354 = VERTEX_POINT('',#455355); +#455355 = CARTESIAN_POINT('',(146.876605,-147.53882,-7.5E-02)); +#455356 = LINE('',#455357,#455358); +#455357 = CARTESIAN_POINT('',(146.358419,-148.10783,-7.5E-02)); +#455358 = VECTOR('',#455359,1.); +#455359 = DIRECTION('',(0.673315793069,0.73935501811,0.)); +#455360 = ORIENTED_EDGE('',*,*,#455361,.T.); +#455361 = EDGE_CURVE('',#455354,#455362,#455364,.T.); +#455362 = VERTEX_POINT('',#455363); +#455363 = CARTESIAN_POINT('',(147.137302,-147.236694,-7.5E-02)); +#455364 = LINE('',#455365,#455366); +#455365 = CARTESIAN_POINT('',(146.876605,-147.53882,-7.5E-02)); +#455366 = VECTOR('',#455367,1.); +#455367 = DIRECTION('',(0.653289677205,0.757108048866,0.)); +#455368 = ORIENTED_EDGE('',*,*,#455369,.T.); +#455369 = EDGE_CURVE('',#455362,#455370,#455372,.T.); +#455370 = VERTEX_POINT('',#455371); +#455371 = CARTESIAN_POINT('',(147.276178,-147.056705,-7.5E-02)); +#455372 = LINE('',#455373,#455374); +#455373 = CARTESIAN_POINT('',(147.137302,-147.236694,-7.5E-02)); +#455374 = VECTOR('',#455375,1.); +#455375 = DIRECTION('',(0.6108788536,0.791724084656,0.)); +#455376 = ORIENTED_EDGE('',*,*,#455377,.T.); +#455377 = EDGE_CURVE('',#455370,#455378,#455380,.T.); +#455378 = VERTEX_POINT('',#455379); +#455379 = CARTESIAN_POINT('',(147.291202,-147.023114,-7.5E-02)); +#455380 = LINE('',#455381,#455382); +#455381 = CARTESIAN_POINT('',(147.276178,-147.056705,-7.5E-02)); +#455382 = VECTOR('',#455383,1.); +#455383 = DIRECTION('',(0.408285613797,0.912854236758,0.)); +#455384 = ORIENTED_EDGE('',*,*,#455385,.T.); +#455385 = EDGE_CURVE('',#455378,#455386,#455388,.T.); +#455386 = VERTEX_POINT('',#455387); +#455387 = CARTESIAN_POINT('',(147.284885,-147.011071,-7.5E-02)); +#455388 = LINE('',#455389,#455390); +#455389 = CARTESIAN_POINT('',(147.291202,-147.023114,-7.5E-02)); +#455390 = VECTOR('',#455391,1.); +#455391 = DIRECTION('',(-0.464512496119,0.885566564946,0.)); +#455392 = ORIENTED_EDGE('',*,*,#455393,.T.); +#455393 = EDGE_CURVE('',#455386,#455394,#455396,.T.); +#455394 = VERTEX_POINT('',#455395); +#455395 = CARTESIAN_POINT('',(147.101216,-146.74514,-7.5E-02)); +#455396 = LINE('',#455397,#455398); +#455397 = CARTESIAN_POINT('',(147.284885,-147.011071,-7.5E-02)); +#455398 = VECTOR('',#455399,1.); +#455399 = DIRECTION('',(-0.568295423481,0.822824593489,0.)); +#455400 = ORIENTED_EDGE('',*,*,#455401,.T.); +#455401 = EDGE_CURVE('',#455394,#455224,#455402,.T.); +#455402 = LINE('',#455403,#455404); +#455403 = CARTESIAN_POINT('',(147.101216,-146.74514,-7.5E-02)); +#455404 = VECTOR('',#455405,1.); +#455405 = DIRECTION('',(-0.591866904044,0.806035711304,0.)); +#455406 = FACE_BOUND('',#455407,.T.); +#455407 = EDGE_LOOP('',(#455408,#455418,#455426,#455434,#455442,#455450, + #455458)); +#455408 = ORIENTED_EDGE('',*,*,#455409,.T.); +#455409 = EDGE_CURVE('',#455410,#455412,#455414,.T.); +#455410 = VERTEX_POINT('',#455411); +#455411 = CARTESIAN_POINT('',(146.417809,-144.216816,-7.5E-02)); +#455412 = VERTEX_POINT('',#455413); +#455413 = CARTESIAN_POINT('',(146.413989,-144.110842,-7.5E-02)); +#455414 = LINE('',#455415,#455416); +#455415 = CARTESIAN_POINT('',(146.417809,-144.216816,-7.5E-02)); +#455416 = VECTOR('',#455417,1.); +#455417 = DIRECTION('',(-3.602318159598E-02,0.999350954564,0.)); +#455418 = ORIENTED_EDGE('',*,*,#455419,.T.); +#455419 = EDGE_CURVE('',#455412,#455420,#455422,.T.); +#455420 = VERTEX_POINT('',#455421); +#455421 = CARTESIAN_POINT('',(146.396547,-144.062104,-7.5E-02)); +#455422 = LINE('',#455423,#455424); +#455423 = CARTESIAN_POINT('',(146.413989,-144.110842,-7.5E-02)); +#455424 = VECTOR('',#455425,1.); +#455425 = DIRECTION('',(-0.336945763579,0.941524058326,0.)); +#455426 = ORIENTED_EDGE('',*,*,#455427,.T.); +#455427 = EDGE_CURVE('',#455420,#455428,#455430,.T.); +#455428 = VERTEX_POINT('',#455429); +#455429 = CARTESIAN_POINT('',(146.36552,-144.070979,-7.5E-02)); +#455430 = LINE('',#455431,#455432); +#455431 = CARTESIAN_POINT('',(146.396547,-144.062104,-7.5E-02)); +#455432 = VECTOR('',#455433,1.); +#455433 = DIRECTION('',(-0.961440881336,-0.275011693746,0.)); +#455434 = ORIENTED_EDGE('',*,*,#455435,.T.); +#455435 = EDGE_CURVE('',#455428,#455436,#455438,.T.); +#455436 = VERTEX_POINT('',#455437); +#455437 = CARTESIAN_POINT('',(146.356453,-144.185775,-7.5E-02)); +#455438 = LINE('',#455439,#455440); +#455439 = CARTESIAN_POINT('',(146.36552,-144.070979,-7.5E-02)); +#455440 = VECTOR('',#455441,1.); +#455441 = DIRECTION('',(-7.873836912299E-02,-0.99689531508,0.)); +#455442 = ORIENTED_EDGE('',*,*,#455443,.T.); +#455443 = EDGE_CURVE('',#455436,#455444,#455446,.T.); +#455444 = VERTEX_POINT('',#455445); +#455445 = CARTESIAN_POINT('',(146.366003,-144.795076,-7.5E-02)); +#455446 = LINE('',#455447,#455448); +#455447 = CARTESIAN_POINT('',(146.356453,-144.185775,-7.5E-02)); +#455448 = VECTOR('',#455449,1.); +#455449 = DIRECTION('',(1.567177333799E-02,-0.999877190219,0.)); +#455450 = ORIENTED_EDGE('',*,*,#455451,.T.); +#455451 = EDGE_CURVE('',#455444,#455452,#455454,.T.); +#455452 = VERTEX_POINT('',#455453); +#455453 = CARTESIAN_POINT('',(146.407974,-144.379645,-7.5E-02)); +#455454 = LINE('',#455455,#455456); +#455455 = CARTESIAN_POINT('',(146.366003,-144.795076,-7.5E-02)); +#455456 = VECTOR('',#455457,1.); +#455457 = DIRECTION('',(0.100518318577,0.994935207755,0.)); +#455458 = ORIENTED_EDGE('',*,*,#455459,.T.); +#455459 = EDGE_CURVE('',#455452,#455410,#455460,.T.); +#455460 = LINE('',#455461,#455462); +#455461 = CARTESIAN_POINT('',(146.407974,-144.379645,-7.5E-02)); +#455462 = VECTOR('',#455463,1.); +#455463 = DIRECTION('',(6.029091036667E-02,0.998180848407,0.)); +#455464 = FACE_BOUND('',#455465,.T.); +#455465 = EDGE_LOOP('',(#455466,#455476,#455484,#455492)); +#455466 = ORIENTED_EDGE('',*,*,#455467,.T.); +#455467 = EDGE_CURVE('',#455468,#455470,#455472,.T.); +#455468 = VERTEX_POINT('',#455469); +#455469 = CARTESIAN_POINT('',(146.693553,-143.946424,-7.5E-02)); +#455470 = VERTEX_POINT('',#455471); +#455471 = CARTESIAN_POINT('',(146.708442,-143.931535,-7.5E-02)); +#455472 = LINE('',#455473,#455474); +#455473 = CARTESIAN_POINT('',(146.693553,-143.946424,-7.5E-02)); +#455474 = VECTOR('',#455475,1.); +#455475 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#455476 = ORIENTED_EDGE('',*,*,#455477,.T.); +#455477 = EDGE_CURVE('',#455470,#455478,#455480,.T.); +#455478 = VERTEX_POINT('',#455479); +#455479 = CARTESIAN_POINT('',(146.693553,-143.916647,-7.5E-02)); +#455480 = LINE('',#455481,#455482); +#455481 = CARTESIAN_POINT('',(146.708442,-143.931535,-7.5E-02)); +#455482 = VECTOR('',#455483,1.); +#455483 = DIRECTION('',(-0.707130527531,0.707083034044,0.)); +#455484 = ORIENTED_EDGE('',*,*,#455485,.T.); +#455485 = EDGE_CURVE('',#455478,#455486,#455488,.T.); +#455486 = VERTEX_POINT('',#455487); +#455487 = CARTESIAN_POINT('',(146.678665,-143.931535,-7.5E-02)); +#455488 = LINE('',#455489,#455490); +#455489 = CARTESIAN_POINT('',(146.693553,-143.916647,-7.5E-02)); +#455490 = VECTOR('',#455491,1.); +#455491 = DIRECTION('',(-0.707106781187,-0.707106781186,0.)); +#455492 = ORIENTED_EDGE('',*,*,#455493,.T.); +#455493 = EDGE_CURVE('',#455486,#455468,#455494,.T.); +#455494 = LINE('',#455495,#455496); +#455495 = CARTESIAN_POINT('',(146.678665,-143.931535,-7.5E-02)); +#455496 = VECTOR('',#455497,1.); +#455497 = DIRECTION('',(0.707083034044,-0.707130527531,0.)); +#455498 = FACE_BOUND('',#455499,.T.); +#455499 = EDGE_LOOP('',(#455500,#455510,#455518,#455526,#455534,#455542) + ); +#455500 = ORIENTED_EDGE('',*,*,#455501,.T.); +#455501 = EDGE_CURVE('',#455502,#455504,#455506,.T.); +#455502 = VERTEX_POINT('',#455503); +#455503 = CARTESIAN_POINT('',(146.605097,-143.914498,-7.5E-02)); +#455504 = VERTEX_POINT('',#455505); +#455505 = CARTESIAN_POINT('',(146.609184,-143.896795,-7.5E-02)); +#455506 = LINE('',#455507,#455508); +#455507 = CARTESIAN_POINT('',(146.605097,-143.914498,-7.5E-02)); +#455508 = VECTOR('',#455509,1.); +#455509 = DIRECTION('',(0.224947940617,0.974370783641,0.)); +#455510 = ORIENTED_EDGE('',*,*,#455511,.T.); +#455511 = EDGE_CURVE('',#455504,#455512,#455514,.T.); +#455512 = VERTEX_POINT('',#455513); +#455513 = CARTESIAN_POINT('',(146.60482,-143.893232,-7.5E-02)); +#455514 = LINE('',#455515,#455516); +#455515 = CARTESIAN_POINT('',(146.609184,-143.896795,-7.5E-02)); +#455516 = VECTOR('',#455517,1.); +#455517 = DIRECTION('',(-0.774613284696,0.632435181795,0.)); +#455518 = ORIENTED_EDGE('',*,*,#455519,.T.); +#455519 = EDGE_CURVE('',#455512,#455520,#455522,.T.); +#455520 = VERTEX_POINT('',#455521); +#455521 = CARTESIAN_POINT('',(146.569481,-143.896795,-7.5E-02)); +#455522 = LINE('',#455523,#455524); +#455523 = CARTESIAN_POINT('',(146.60482,-143.893232,-7.5E-02)); +#455524 = VECTOR('',#455525,1.); +#455525 = DIRECTION('',(-0.994955740831,-0.100314873216,0.)); +#455526 = ORIENTED_EDGE('',*,*,#455527,.T.); +#455527 = EDGE_CURVE('',#455520,#455528,#455530,.T.); +#455528 = VERTEX_POINT('',#455529); +#455529 = CARTESIAN_POINT('',(146.564823,-143.905752,-7.5E-02)); +#455530 = LINE('',#455531,#455532); +#455531 = CARTESIAN_POINT('',(146.569481,-143.896795,-7.5E-02)); +#455532 = VECTOR('',#455533,1.); +#455533 = DIRECTION('',(-0.461380805095,-0.887202205075,0.)); +#455534 = ORIENTED_EDGE('',*,*,#455535,.T.); +#455535 = EDGE_CURVE('',#455528,#455536,#455538,.T.); +#455536 = VERTEX_POINT('',#455537); +#455537 = CARTESIAN_POINT('',(146.589333,-143.916647,-7.5E-02)); +#455538 = LINE('',#455539,#455540); +#455539 = CARTESIAN_POINT('',(146.564823,-143.905752,-7.5E-02)); +#455540 = VECTOR('',#455541,1.); +#455541 = DIRECTION('',(0.913788485948,-0.406190353097,0.)); +#455542 = ORIENTED_EDGE('',*,*,#455543,.T.); +#455543 = EDGE_CURVE('',#455536,#455502,#455544,.T.); +#455544 = LINE('',#455545,#455546); +#455545 = CARTESIAN_POINT('',(146.589333,-143.916647,-7.5E-02)); +#455546 = VECTOR('',#455547,1.); +#455547 = DIRECTION('',(0.990835521995,0.135073936613,0.)); +#455548 = FACE_BOUND('',#455549,.T.); +#455549 = EDGE_LOOP('',(#455550,#455560,#455568,#455576)); +#455550 = ORIENTED_EDGE('',*,*,#455551,.T.); +#455551 = EDGE_CURVE('',#455552,#455554,#455556,.T.); +#455552 = VERTEX_POINT('',#455553); +#455553 = CARTESIAN_POINT('',(146.485112,-143.88687,-7.5E-02)); +#455554 = VERTEX_POINT('',#455555); +#455555 = CARTESIAN_POINT('',(146.500001,-143.871981,-7.5E-02)); +#455556 = LINE('',#455557,#455558); +#455557 = CARTESIAN_POINT('',(146.485112,-143.88687,-7.5E-02)); +#455558 = VECTOR('',#455559,1.); +#455559 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#455560 = ORIENTED_EDGE('',*,*,#455561,.T.); +#455561 = EDGE_CURVE('',#455554,#455562,#455564,.T.); +#455562 = VERTEX_POINT('',#455563); +#455563 = CARTESIAN_POINT('',(146.485112,-143.857092,-7.5E-02)); +#455564 = LINE('',#455565,#455566); +#455565 = CARTESIAN_POINT('',(146.500001,-143.871981,-7.5E-02)); +#455566 = VECTOR('',#455567,1.); +#455567 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#455568 = ORIENTED_EDGE('',*,*,#455569,.T.); +#455569 = EDGE_CURVE('',#455562,#455570,#455572,.T.); +#455570 = VERTEX_POINT('',#455571); +#455571 = CARTESIAN_POINT('',(146.470224,-143.871981,-7.5E-02)); +#455572 = LINE('',#455573,#455574); +#455573 = CARTESIAN_POINT('',(146.485112,-143.857092,-7.5E-02)); +#455574 = VECTOR('',#455575,1.); +#455575 = DIRECTION('',(-0.707083034044,-0.707130527532,0.)); +#455576 = ORIENTED_EDGE('',*,*,#455577,.T.); +#455577 = EDGE_CURVE('',#455570,#455552,#455578,.T.); +#455578 = LINE('',#455579,#455580); +#455579 = CARTESIAN_POINT('',(146.470224,-143.871981,-7.5E-02)); +#455580 = VECTOR('',#455581,1.); +#455581 = DIRECTION('',(0.707083034044,-0.707130527531,0.)); +#455582 = FACE_BOUND('',#455583,.T.); +#455583 = EDGE_LOOP('',(#455584,#455594,#455602,#455610)); +#455584 = ORIENTED_EDGE('',*,*,#455585,.T.); +#455585 = EDGE_CURVE('',#455586,#455588,#455590,.T.); +#455586 = VERTEX_POINT('',#455587); +#455587 = CARTESIAN_POINT('',(146.366003,-143.857092,-7.5E-02)); +#455588 = VERTEX_POINT('',#455589); +#455589 = CARTESIAN_POINT('',(146.380892,-143.842204,-7.5E-02)); +#455590 = LINE('',#455591,#455592); +#455591 = CARTESIAN_POINT('',(146.366003,-143.857092,-7.5E-02)); +#455592 = VECTOR('',#455593,1.); +#455593 = DIRECTION('',(0.707130527531,0.707083034044,0.)); +#455594 = ORIENTED_EDGE('',*,*,#455595,.T.); +#455595 = EDGE_CURVE('',#455588,#455596,#455598,.T.); +#455596 = VERTEX_POINT('',#455597); +#455597 = CARTESIAN_POINT('',(146.366003,-143.827315,-7.5E-02)); +#455598 = LINE('',#455599,#455600); +#455599 = CARTESIAN_POINT('',(146.380892,-143.842204,-7.5E-02)); +#455600 = VECTOR('',#455601,1.); +#455601 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#455602 = ORIENTED_EDGE('',*,*,#455603,.T.); +#455603 = EDGE_CURVE('',#455596,#455604,#455606,.T.); +#455604 = VERTEX_POINT('',#455605); +#455605 = CARTESIAN_POINT('',(146.351115,-143.842204,-7.5E-02)); +#455606 = LINE('',#455607,#455608); +#455607 = CARTESIAN_POINT('',(146.366003,-143.827315,-7.5E-02)); +#455608 = VECTOR('',#455609,1.); +#455609 = DIRECTION('',(-0.707083034044,-0.707130527531,0.)); +#455610 = ORIENTED_EDGE('',*,*,#455611,.T.); +#455611 = EDGE_CURVE('',#455604,#455586,#455612,.T.); +#455612 = LINE('',#455613,#455614); +#455613 = CARTESIAN_POINT('',(146.351115,-143.842204,-7.5E-02)); +#455614 = VECTOR('',#455615,1.); +#455615 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#455616 = FACE_BOUND('',#455617,.T.); +#455617 = EDGE_LOOP('',(#455618,#455628,#455636,#455644)); +#455618 = ORIENTED_EDGE('',*,*,#455619,.T.); +#455619 = EDGE_CURVE('',#455620,#455622,#455624,.T.); +#455620 = VERTEX_POINT('',#455621); +#455621 = CARTESIAN_POINT('',(146.246894,-143.827315,-7.5E-02)); +#455622 = VERTEX_POINT('',#455623); +#455623 = CARTESIAN_POINT('',(146.261783,-143.812426,-7.5E-02)); +#455624 = LINE('',#455625,#455626); +#455625 = CARTESIAN_POINT('',(146.246894,-143.827315,-7.5E-02)); +#455626 = VECTOR('',#455627,1.); +#455627 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#455628 = ORIENTED_EDGE('',*,*,#455629,.T.); +#455629 = EDGE_CURVE('',#455622,#455630,#455632,.T.); +#455630 = VERTEX_POINT('',#455631); +#455631 = CARTESIAN_POINT('',(146.246894,-143.797538,-7.5E-02)); +#455632 = LINE('',#455633,#455634); +#455633 = CARTESIAN_POINT('',(146.261783,-143.812426,-7.5E-02)); +#455634 = VECTOR('',#455635,1.); +#455635 = DIRECTION('',(-0.707130527532,0.707083034044,0.)); +#455636 = ORIENTED_EDGE('',*,*,#455637,.T.); +#455637 = EDGE_CURVE('',#455630,#455638,#455640,.T.); +#455638 = VERTEX_POINT('',#455639); +#455639 = CARTESIAN_POINT('',(146.232006,-143.812426,-7.5E-02)); +#455640 = LINE('',#455641,#455642); +#455641 = CARTESIAN_POINT('',(146.246894,-143.797538,-7.5E-02)); +#455642 = VECTOR('',#455643,1.); +#455643 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#455644 = ORIENTED_EDGE('',*,*,#455645,.T.); +#455645 = EDGE_CURVE('',#455638,#455620,#455646,.T.); +#455646 = LINE('',#455647,#455648); +#455647 = CARTESIAN_POINT('',(146.232006,-143.812426,-7.5E-02)); +#455648 = VECTOR('',#455649,1.); +#455649 = DIRECTION('',(0.707083034044,-0.707130527532,0.)); +#455650 = FACE_BOUND('',#455651,.T.); +#455651 = EDGE_LOOP('',(#455652,#455662,#455670,#455678)); +#455652 = ORIENTED_EDGE('',*,*,#455653,.T.); +#455653 = EDGE_CURVE('',#455654,#455656,#455658,.T.); +#455654 = VERTEX_POINT('',#455655); +#455655 = CARTESIAN_POINT('',(147.110435,-143.440211,-7.5E-02)); +#455656 = VERTEX_POINT('',#455657); +#455657 = CARTESIAN_POINT('',(147.125323,-143.425322,-7.5E-02)); +#455658 = LINE('',#455659,#455660); +#455659 = CARTESIAN_POINT('',(147.110435,-143.440211,-7.5E-02)); +#455660 = VECTOR('',#455661,1.); +#455661 = DIRECTION('',(0.707083034044,0.707130527531,0.)); +#455662 = ORIENTED_EDGE('',*,*,#455663,.T.); +#455663 = EDGE_CURVE('',#455656,#455664,#455666,.T.); +#455664 = VERTEX_POINT('',#455665); +#455665 = CARTESIAN_POINT('',(147.110435,-143.410433,-7.5E-02)); +#455666 = LINE('',#455667,#455668); +#455667 = CARTESIAN_POINT('',(147.125323,-143.425322,-7.5E-02)); +#455668 = VECTOR('',#455669,1.); +#455669 = DIRECTION('',(-0.707083034045,0.707130527531,0.)); +#455670 = ORIENTED_EDGE('',*,*,#455671,.T.); +#455671 = EDGE_CURVE('',#455664,#455672,#455674,.T.); +#455672 = VERTEX_POINT('',#455673); +#455673 = CARTESIAN_POINT('',(147.095546,-143.425322,-7.5E-02)); +#455674 = LINE('',#455675,#455676); +#455675 = CARTESIAN_POINT('',(147.110435,-143.410433,-7.5E-02)); +#455676 = VECTOR('',#455677,1.); +#455677 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#455678 = ORIENTED_EDGE('',*,*,#455679,.T.); +#455679 = EDGE_CURVE('',#455672,#455654,#455680,.T.); +#455680 = LINE('',#455681,#455682); +#455681 = CARTESIAN_POINT('',(147.095546,-143.425322,-7.5E-02)); +#455682 = VECTOR('',#455683,1.); +#455683 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#455684 = FACE_BOUND('',#455685,.T.); +#455685 = EDGE_LOOP('',(#455686,#455696,#455704,#455712)); +#455686 = ORIENTED_EDGE('',*,*,#455687,.T.); +#455687 = EDGE_CURVE('',#455688,#455690,#455692,.T.); +#455688 = VERTEX_POINT('',#455689); +#455689 = CARTESIAN_POINT('',(146.991326,-143.410433,-7.5E-02)); +#455690 = VERTEX_POINT('',#455691); +#455691 = CARTESIAN_POINT('',(147.006214,-143.395545,-7.5E-02)); +#455692 = LINE('',#455693,#455694); +#455693 = CARTESIAN_POINT('',(146.991326,-143.410433,-7.5E-02)); +#455694 = VECTOR('',#455695,1.); +#455695 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#455696 = ORIENTED_EDGE('',*,*,#455697,.T.); +#455697 = EDGE_CURVE('',#455690,#455698,#455700,.T.); +#455698 = VERTEX_POINT('',#455699); +#455699 = CARTESIAN_POINT('',(146.991326,-143.380656,-7.5E-02)); +#455700 = LINE('',#455701,#455702); +#455701 = CARTESIAN_POINT('',(147.006214,-143.395545,-7.5E-02)); +#455702 = VECTOR('',#455703,1.); +#455703 = DIRECTION('',(-0.707083034044,0.707130527531,0.)); +#455704 = ORIENTED_EDGE('',*,*,#455705,.T.); +#455705 = EDGE_CURVE('',#455698,#455706,#455708,.T.); +#455706 = VERTEX_POINT('',#455707); +#455707 = CARTESIAN_POINT('',(146.976437,-143.395545,-7.5E-02)); +#455708 = LINE('',#455709,#455710); +#455709 = CARTESIAN_POINT('',(146.991326,-143.380656,-7.5E-02)); +#455710 = VECTOR('',#455711,1.); +#455711 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#455712 = ORIENTED_EDGE('',*,*,#455713,.T.); +#455713 = EDGE_CURVE('',#455706,#455688,#455714,.T.); +#455714 = LINE('',#455715,#455716); +#455715 = CARTESIAN_POINT('',(146.976437,-143.395545,-7.5E-02)); +#455716 = VECTOR('',#455717,1.); +#455717 = DIRECTION('',(0.707130527531,-0.707083034045,0.)); +#455718 = FACE_BOUND('',#455719,.T.); +#455719 = EDGE_LOOP('',(#455720,#455730,#455738,#455746,#455754,#455762) + ); +#455720 = ORIENTED_EDGE('',*,*,#455721,.T.); +#455721 = EDGE_CURVE('',#455722,#455724,#455726,.T.); +#455722 = VERTEX_POINT('',#455723); +#455723 = CARTESIAN_POINT('',(146.873092,-143.378507,-7.5E-02)); +#455724 = VERTEX_POINT('',#455725); +#455725 = CARTESIAN_POINT('',(146.87718,-143.360805,-7.5E-02)); +#455726 = LINE('',#455727,#455728); +#455727 = CARTESIAN_POINT('',(146.873092,-143.378507,-7.5E-02)); +#455728 = VECTOR('',#455729,1.); +#455729 = DIRECTION('',(0.22501226133,0.974355932014,0.)); +#455730 = ORIENTED_EDGE('',*,*,#455731,.T.); +#455731 = EDGE_CURVE('',#455724,#455732,#455734,.T.); +#455732 = VERTEX_POINT('',#455733); +#455733 = CARTESIAN_POINT('',(146.872815,-143.357241,-7.5E-02)); +#455734 = LINE('',#455735,#455736); +#455735 = CARTESIAN_POINT('',(146.87718,-143.360805,-7.5E-02)); +#455736 = VECTOR('',#455737,1.); +#455737 = DIRECTION('',(-0.774597327842,0.632454725415,0.)); +#455738 = ORIENTED_EDGE('',*,*,#455739,.T.); +#455739 = EDGE_CURVE('',#455732,#455740,#455742,.T.); +#455740 = VERTEX_POINT('',#455741); +#455741 = CARTESIAN_POINT('',(146.837477,-143.360805,-7.5E-02)); +#455742 = LINE('',#455743,#455744); +#455743 = CARTESIAN_POINT('',(146.872815,-143.357241,-7.5E-02)); +#455744 = VECTOR('',#455745,1.); +#455745 = DIRECTION('',(-0.994952646878,-0.100345555308,0.)); +#455746 = ORIENTED_EDGE('',*,*,#455747,.T.); +#455747 = EDGE_CURVE('',#455740,#455748,#455750,.T.); +#455748 = VERTEX_POINT('',#455749); +#455749 = CARTESIAN_POINT('',(146.832818,-143.369761,-7.5E-02)); +#455750 = LINE('',#455751,#455752); +#455751 = CARTESIAN_POINT('',(146.837477,-143.360805,-7.5E-02)); +#455752 = VECTOR('',#455753,1.); +#455753 = DIRECTION('',(-0.461499317433,-0.887140563839,0.)); +#455754 = ORIENTED_EDGE('',*,*,#455755,.T.); +#455755 = EDGE_CURVE('',#455748,#455756,#455758,.T.); +#455756 = VERTEX_POINT('',#455757); +#455757 = CARTESIAN_POINT('',(146.857328,-143.380656,-7.5E-02)); +#455758 = LINE('',#455759,#455760); +#455759 = CARTESIAN_POINT('',(146.832818,-143.369761,-7.5E-02)); +#455760 = VECTOR('',#455761,1.); +#455761 = DIRECTION('',(0.913788485948,-0.406190353096,0.)); +#455762 = ORIENTED_EDGE('',*,*,#455763,.T.); +#455763 = EDGE_CURVE('',#455756,#455722,#455764,.T.); +#455764 = LINE('',#455765,#455766); +#455765 = CARTESIAN_POINT('',(146.857328,-143.380656,-7.5E-02)); +#455766 = VECTOR('',#455767,1.); +#455767 = DIRECTION('',(0.990835521996,0.135073936611,0.)); +#455768 = FACE_BOUND('',#455769,.T.); +#455769 = EDGE_LOOP('',(#455770,#455780,#455788,#455796,#455804,#455812) + ); +#455770 = ORIENTED_EDGE('',*,*,#455771,.T.); +#455771 = EDGE_CURVE('',#455772,#455774,#455776,.T.); +#455772 = VERTEX_POINT('',#455773); +#455773 = CARTESIAN_POINT('',(146.753983,-143.34873,-7.5E-02)); +#455774 = VERTEX_POINT('',#455775); +#455775 = CARTESIAN_POINT('',(146.758071,-143.331027,-7.5E-02)); +#455776 = LINE('',#455777,#455778); +#455777 = CARTESIAN_POINT('',(146.753983,-143.34873,-7.5E-02)); +#455778 = VECTOR('',#455779,1.); +#455779 = DIRECTION('',(0.22500019441,0.974358718602,0.)); +#455780 = ORIENTED_EDGE('',*,*,#455781,.T.); +#455781 = EDGE_CURVE('',#455774,#455782,#455784,.T.); +#455782 = VERTEX_POINT('',#455783); +#455783 = CARTESIAN_POINT('',(146.753706,-143.327464,-7.5E-02)); +#455784 = LINE('',#455785,#455786); +#455785 = CARTESIAN_POINT('',(146.758071,-143.331027,-7.5E-02)); +#455786 = VECTOR('',#455787,1.); +#455787 = DIRECTION('',(-0.774684265785,0.632348233448,0.)); +#455788 = ORIENTED_EDGE('',*,*,#455789,.T.); +#455789 = EDGE_CURVE('',#455782,#455790,#455792,.T.); +#455790 = VERTEX_POINT('',#455791); +#455791 = CARTESIAN_POINT('',(146.718368,-143.331027,-7.5E-02)); +#455792 = LINE('',#455793,#455794); +#455793 = CARTESIAN_POINT('',(146.753706,-143.327464,-7.5E-02)); +#455794 = VECTOR('',#455795,1.); +#455795 = DIRECTION('',(-0.994955457497,-0.100317683374,0.)); +#455796 = ORIENTED_EDGE('',*,*,#455797,.T.); +#455797 = EDGE_CURVE('',#455790,#455798,#455800,.T.); +#455798 = VERTEX_POINT('',#455799); +#455799 = CARTESIAN_POINT('',(146.713709,-143.339984,-7.5E-02)); +#455800 = LINE('',#455801,#455802); +#455801 = CARTESIAN_POINT('',(146.718368,-143.331027,-7.5E-02)); +#455802 = VECTOR('',#455803,1.); +#455803 = DIRECTION('',(-0.461458765754,-0.887161658047,0.)); +#455804 = ORIENTED_EDGE('',*,*,#455805,.T.); +#455805 = EDGE_CURVE('',#455798,#455806,#455808,.T.); +#455806 = VERTEX_POINT('',#455807); +#455807 = CARTESIAN_POINT('',(146.738219,-143.350879,-7.5E-02)); +#455808 = LINE('',#455809,#455810); +#455809 = CARTESIAN_POINT('',(146.713709,-143.339984,-7.5E-02)); +#455810 = VECTOR('',#455811,1.); +#455811 = DIRECTION('',(0.913788485948,-0.406190353097,0.)); +#455812 = ORIENTED_EDGE('',*,*,#455813,.T.); +#455813 = EDGE_CURVE('',#455806,#455772,#455814,.T.); +#455814 = LINE('',#455815,#455816); +#455815 = CARTESIAN_POINT('',(146.738219,-143.350879,-7.5E-02)); +#455816 = VECTOR('',#455817,1.); +#455817 = DIRECTION('',(0.990835521995,0.135073936613,0.)); +#455818 = FACE_BOUND('',#455819,.T.); +#455819 = EDGE_LOOP('',(#455820,#455830,#455838,#455846,#455854,#455862, + #455870,#455878,#455886,#455894,#455902,#455910,#455918,#455926, + #455934,#455942,#455950,#455958,#455966,#455974,#455982,#455990, + #455998,#456006,#456014)); +#455820 = ORIENTED_EDGE('',*,*,#455821,.T.); +#455821 = EDGE_CURVE('',#455822,#455824,#455826,.T.); +#455822 = VERTEX_POINT('',#455823); +#455823 = CARTESIAN_POINT('',(146.462318,-141.488961,-7.5E-02)); +#455824 = VERTEX_POINT('',#455825); +#455825 = CARTESIAN_POINT('',(146.419341,-141.252662,-7.5E-02)); +#455826 = LINE('',#455827,#455828); +#455827 = CARTESIAN_POINT('',(146.462318,-141.488961,-7.5E-02)); +#455828 = VECTOR('',#455829,1.); +#455829 = DIRECTION('',(-0.178940031351,0.983859982508,0.)); +#455830 = ORIENTED_EDGE('',*,*,#455831,.T.); +#455831 = EDGE_CURVE('',#455824,#455832,#455834,.T.); +#455832 = VERTEX_POINT('',#455833); +#455833 = CARTESIAN_POINT('',(146.358512,-140.715592,-7.5E-02)); +#455834 = LINE('',#455835,#455836); +#455835 = CARTESIAN_POINT('',(146.419341,-141.252662,-7.5E-02)); +#455836 = VECTOR('',#455837,1.); +#455837 = DIRECTION('',(-0.112541300525,0.993647047837,0.)); +#455838 = ORIENTED_EDGE('',*,*,#455839,.T.); +#455839 = EDGE_CURVE('',#455832,#455840,#455842,.T.); +#455840 = VERTEX_POINT('',#455841); +#455841 = CARTESIAN_POINT('',(146.353316,-141.638687,-7.5E-02)); +#455842 = LINE('',#455843,#455844); +#455843 = CARTESIAN_POINT('',(146.358512,-140.715592,-7.5E-02)); +#455844 = VECTOR('',#455845,1.); +#455845 = DIRECTION('',(-5.628800595679E-03,-0.999984158176,0.)); +#455846 = ORIENTED_EDGE('',*,*,#455847,.T.); +#455847 = EDGE_CURVE('',#455840,#455848,#455850,.T.); +#455848 = VERTEX_POINT('',#455849); +#455849 = CARTESIAN_POINT('',(147.133277,-142.491813,-7.5E-02)); +#455850 = LINE('',#455851,#455852); +#455851 = CARTESIAN_POINT('',(146.353316,-141.638687,-7.5E-02)); +#455852 = VECTOR('',#455853,1.); +#455853 = DIRECTION('',(0.674750391212,-0.738046007753,0.)); +#455854 = ORIENTED_EDGE('',*,*,#455855,.T.); +#455855 = EDGE_CURVE('',#455848,#455856,#455858,.T.); +#455856 = VERTEX_POINT('',#455857); +#455857 = CARTESIAN_POINT('',(147.219946,-142.599562,-7.5E-02)); +#455858 = LINE('',#455859,#455860); +#455859 = CARTESIAN_POINT('',(147.133277,-142.491813,-7.5E-02)); +#455860 = VECTOR('',#455861,1.); +#455861 = DIRECTION('',(0.626764467513,-0.779208766803,0.)); +#455862 = ORIENTED_EDGE('',*,*,#455863,.T.); +#455863 = EDGE_CURVE('',#455856,#455864,#455866,.T.); +#455864 = VERTEX_POINT('',#455865); +#455865 = CARTESIAN_POINT('',(147.274414,-142.684646,-7.5E-02)); +#455866 = LINE('',#455867,#455868); +#455867 = CARTESIAN_POINT('',(147.219946,-142.599562,-7.5E-02)); +#455868 = VECTOR('',#455869,1.); +#455869 = DIRECTION('',(0.539153689228,-0.842207396899,0.)); +#455870 = ORIENTED_EDGE('',*,*,#455871,.T.); +#455871 = EDGE_CURVE('',#455864,#455872,#455874,.T.); +#455872 = VERTEX_POINT('',#455873); +#455873 = CARTESIAN_POINT('',(147.299264,-142.753824,-7.5E-02)); +#455874 = LINE('',#455875,#455876); +#455875 = CARTESIAN_POINT('',(147.274414,-142.684646,-7.5E-02)); +#455876 = VECTOR('',#455877,1.); +#455877 = DIRECTION('',(0.338068074089,-0.941121659129,0.)); +#455878 = ORIENTED_EDGE('',*,*,#455879,.T.); +#455879 = EDGE_CURVE('',#455872,#455880,#455882,.T.); +#455880 = VERTEX_POINT('',#455881); +#455881 = CARTESIAN_POINT('',(147.29708,-142.813857,-7.5E-02)); +#455882 = LINE('',#455883,#455884); +#455883 = CARTESIAN_POINT('',(147.299264,-142.753824,-7.5E-02)); +#455884 = VECTOR('',#455885,1.); +#455885 = DIRECTION('',(-3.635594034848E-02,-0.999338904277,0.)); +#455886 = ORIENTED_EDGE('',*,*,#455887,.T.); +#455887 = EDGE_CURVE('',#455880,#455888,#455890,.T.); +#455888 = VERTEX_POINT('',#455889); +#455889 = CARTESIAN_POINT('',(147.270442,-142.871502,-7.5E-02)); +#455890 = LINE('',#455891,#455892); +#455891 = CARTESIAN_POINT('',(147.29708,-142.813857,-7.5E-02)); +#455892 = VECTOR('',#455893,1.); +#455893 = DIRECTION('',(-0.419481547242,-0.907763863306,0.)); +#455894 = ORIENTED_EDGE('',*,*,#455895,.T.); +#455895 = EDGE_CURVE('',#455888,#455896,#455898,.T.); +#455896 = VERTEX_POINT('',#455897); +#455897 = CARTESIAN_POINT('',(147.221936,-142.93352,-7.5E-02)); +#455898 = LINE('',#455899,#455900); +#455899 = CARTESIAN_POINT('',(147.270442,-142.871502,-7.5E-02)); +#455900 = VECTOR('',#455901,1.); +#455901 = DIRECTION('',(-0.616073303493,-0.787688824805,0.)); +#455902 = ORIENTED_EDGE('',*,*,#455903,.T.); +#455903 = EDGE_CURVE('',#455896,#455904,#455906,.T.); +#455904 = VERTEX_POINT('',#455905); +#455905 = CARTESIAN_POINT('',(147.096994,-143.068731,-7.5E-02)); +#455906 = LINE('',#455907,#455908); +#455907 = CARTESIAN_POINT('',(147.221936,-142.93352,-7.5E-02)); +#455908 = VECTOR('',#455909,1.); +#455909 = DIRECTION('',(-0.678666694339,-0.734446402397,0.)); +#455910 = ORIENTED_EDGE('',*,*,#455911,.T.); +#455911 = EDGE_CURVE('',#455904,#455912,#455914,.T.); +#455912 = VERTEX_POINT('',#455913); +#455913 = CARTESIAN_POINT('',(147.048109,-143.130163,-7.5E-02)); +#455914 = LINE('',#455915,#455916); +#455915 = CARTESIAN_POINT('',(147.096994,-143.068731,-7.5E-02)); +#455916 = VECTOR('',#455917,1.); +#455917 = DIRECTION('',(-0.622668941424,-0.782485392443,0.)); +#455918 = ORIENTED_EDGE('',*,*,#455919,.T.); +#455919 = EDGE_CURVE('',#455912,#455920,#455922,.T.); +#455920 = VERTEX_POINT('',#455921); +#455921 = CARTESIAN_POINT('',(147.034853,-143.165616,-7.5E-02)); +#455922 = LINE('',#455923,#455924); +#455923 = CARTESIAN_POINT('',(147.048109,-143.130163,-7.5E-02)); +#455924 = VECTOR('',#455925,1.); +#455925 = DIRECTION('',(-0.350222829493,-0.936666413246,0.)); +#455926 = ORIENTED_EDGE('',*,*,#455927,.T.); +#455927 = EDGE_CURVE('',#455920,#455928,#455930,.T.); +#455928 = VERTEX_POINT('',#455929); +#455929 = CARTESIAN_POINT('',(147.052357,-143.18355,-7.5E-02)); +#455930 = LINE('',#455931,#455932); +#455931 = CARTESIAN_POINT('',(147.034853,-143.165616,-7.5E-02)); +#455932 = VECTOR('',#455933,1.); +#455933 = DIRECTION('',(0.698475424489,-0.715634041521,0.)); +#455934 = ORIENTED_EDGE('',*,*,#455935,.T.); +#455935 = EDGE_CURVE('',#455928,#455936,#455938,.T.); +#455936 = VERTEX_POINT('',#455937); +#455937 = CARTESIAN_POINT('',(147.127522,-143.200734,-7.5E-02)); +#455938 = LINE('',#455939,#455940); +#455939 = CARTESIAN_POINT('',(147.052357,-143.18355,-7.5E-02)); +#455940 = VECTOR('',#455941,1.); +#455941 = DIRECTION('',(0.974848846483,-0.222867060174,0.)); +#455942 = ORIENTED_EDGE('',*,*,#455943,.T.); +#455943 = EDGE_CURVE('',#455936,#455944,#455946,.T.); +#455944 = VERTEX_POINT('',#455945); +#455945 = CARTESIAN_POINT('',(147.164714,-143.170436,-7.5E-02)); +#455946 = LINE('',#455947,#455948); +#455947 = CARTESIAN_POINT('',(147.127522,-143.200734,-7.5E-02)); +#455948 = VECTOR('',#455949,1.); +#455949 = DIRECTION('',(0.775302279311,0.631590354339,0.)); +#455950 = ORIENTED_EDGE('',*,*,#455951,.T.); +#455951 = EDGE_CURVE('',#455944,#455952,#455954,.T.); +#455952 = VERTEX_POINT('',#455953); +#455953 = CARTESIAN_POINT('',(147.300177,-143.028334,-7.5E-02)); +#455954 = LINE('',#455955,#455956); +#455955 = CARTESIAN_POINT('',(147.164714,-143.170436,-7.5E-02)); +#455956 = VECTOR('',#455957,1.); +#455957 = DIRECTION('',(0.689996343803,0.723812852565,0.)); +#455958 = ORIENTED_EDGE('',*,*,#455959,.T.); +#455959 = EDGE_CURVE('',#455952,#455960,#455962,.T.); +#455960 = VERTEX_POINT('',#455961); +#455961 = CARTESIAN_POINT('',(147.444937,-142.859275,-7.5E-02)); +#455962 = LINE('',#455963,#455964); +#455963 = CARTESIAN_POINT('',(147.300177,-143.028334,-7.5E-02)); +#455964 = VECTOR('',#455965,1.); +#455965 = DIRECTION('',(0.65040869748,0.759584443128,0.)); +#455966 = ORIENTED_EDGE('',*,*,#455967,.T.); +#455967 = EDGE_CURVE('',#455960,#455968,#455970,.T.); +#455968 = VERTEX_POINT('',#455969); +#455969 = CARTESIAN_POINT('',(147.493752,-142.795282,-7.5E-02)); +#455970 = LINE('',#455971,#455972); +#455971 = CARTESIAN_POINT('',(147.444937,-142.859275,-7.5E-02)); +#455972 = VECTOR('',#455973,1.); +#455973 = DIRECTION('',(0.606502428908,0.795081633374,0.)); +#455974 = ORIENTED_EDGE('',*,*,#455975,.T.); +#455975 = EDGE_CURVE('',#455968,#455976,#455978,.T.); +#455976 = VERTEX_POINT('',#455977); +#455977 = CARTESIAN_POINT('',(147.512428,-142.761324,-7.5E-02)); +#455978 = LINE('',#455979,#455980); +#455979 = CARTESIAN_POINT('',(147.493752,-142.795282,-7.5E-02)); +#455980 = VECTOR('',#455981,1.); +#455981 = DIRECTION('',(0.481900920193,0.876225714709,0.)); +#455982 = ORIENTED_EDGE('',*,*,#455983,.T.); +#455983 = EDGE_CURVE('',#455976,#455984,#455986,.T.); +#455984 = VERTEX_POINT('',#455985); +#455985 = CARTESIAN_POINT('',(147.500232,-142.741146,-7.5E-02)); +#455986 = LINE('',#455987,#455988); +#455987 = CARTESIAN_POINT('',(147.512428,-142.761324,-7.5E-02)); +#455988 = VECTOR('',#455989,1.); +#455989 = DIRECTION('',(-0.517274873723,0.855819317973,0.)); +#455990 = ORIENTED_EDGE('',*,*,#455991,.T.); +#455991 = EDGE_CURVE('',#455984,#455992,#455994,.T.); +#455992 = VERTEX_POINT('',#455993); +#455993 = CARTESIAN_POINT('',(147.274827,-142.467594,-7.5E-02)); +#455994 = LINE('',#455995,#455996); +#455995 = CARTESIAN_POINT('',(147.500232,-142.741146,-7.5E-02)); +#455996 = VECTOR('',#455997,1.); +#455997 = DIRECTION('',(-0.635920531427,0.771754544988,0.)); +#455998 = ORIENTED_EDGE('',*,*,#455999,.T.); +#455999 = EDGE_CURVE('',#455992,#456000,#456002,.T.); +#456000 = VERTEX_POINT('',#456001); +#456001 = CARTESIAN_POINT('',(146.513914,-141.589915,-7.5E-02)); +#456002 = LINE('',#456003,#456004); +#456003 = CARTESIAN_POINT('',(147.274827,-142.467594,-7.5E-02)); +#456004 = VECTOR('',#456005,1.); +#456005 = DIRECTION('',(-0.655057301917,0.75557920247,0.)); +#456006 = ORIENTED_EDGE('',*,*,#456007,.T.); +#456007 = EDGE_CURVE('',#456000,#456008,#456010,.T.); +#456008 = VERTEX_POINT('',#456009); +#456009 = CARTESIAN_POINT('',(146.481396,-141.547513,-7.5E-02)); +#456010 = LINE('',#456011,#456012); +#456011 = CARTESIAN_POINT('',(146.513914,-141.589915,-7.5E-02)); +#456012 = VECTOR('',#456013,1.); +#456013 = DIRECTION('',(-0.608547043783,0.793517797849,0.)); +#456014 = ORIENTED_EDGE('',*,*,#456015,.T.); +#456015 = EDGE_CURVE('',#456008,#455822,#456016,.T.); +#456016 = LINE('',#456017,#456018); +#456017 = CARTESIAN_POINT('',(146.481396,-141.547513,-7.5E-02)); +#456018 = VECTOR('',#456019,1.); +#456019 = DIRECTION('',(-0.309799785515,0.950801815782,0.)); +#456020 = PLANE('',#456021); +#456021 = AXIS2_PLACEMENT_3D('',#456022,#456023,#456024); +#456022 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456023 = DIRECTION('',(-0.,-0.,-1.)); +#456024 = DIRECTION('',(-1.,0.,0.)); +#456025 = SHELL_BASED_SURFACE_MODEL('',(#456026)); +#456026 = OPEN_SHELL('',(#456027)); +#456027 = ADVANCED_FACE('',(#456028),#456104,.T.); +#456028 = FACE_BOUND('',#456029,.T.); +#456029 = EDGE_LOOP('',(#456030,#456041,#456049,#456057,#456065,#456073, + #456082,#456090,#456098)); +#456030 = ORIENTED_EDGE('',*,*,#456031,.T.); +#456031 = EDGE_CURVE('',#456032,#456034,#456036,.T.); +#456032 = VERTEX_POINT('',#456033); +#456033 = CARTESIAN_POINT('',(153.072419,-148.477696,-7.5E-02)); +#456034 = VERTEX_POINT('',#456035); +#456035 = CARTESIAN_POINT('',(153.072419,-148.377696,-7.5E-02)); +#456036 = CIRCLE('',#456037,5.000000000004E-02); +#456037 = AXIS2_PLACEMENT_3D('',#456038,#456039,#456040); +#456038 = CARTESIAN_POINT('',(153.07241904771,-148.427696,-7.5E-02)); +#456039 = DIRECTION('',(0.,0.,-1.)); +#456040 = DIRECTION('',(-9.54237293626E-07,-1.,-0.)); +#456041 = ORIENTED_EDGE('',*,*,#456042,.T.); +#456042 = EDGE_CURVE('',#456034,#456043,#456045,.T.); +#456043 = VERTEX_POINT('',#456044); +#456044 = CARTESIAN_POINT('',(153.932017,-148.378184,-7.5E-02)); +#456045 = LINE('',#456046,#456047); +#456046 = CARTESIAN_POINT('',(153.072419,-148.377696,-7.5E-02)); +#456047 = VECTOR('',#456048,1.); +#456048 = DIRECTION('',(0.999999838854,-5.677071391271E-04,0.)); +#456049 = ORIENTED_EDGE('',*,*,#456050,.T.); +#456050 = EDGE_CURVE('',#456043,#456051,#456053,.T.); +#456051 = VERTEX_POINT('',#456052); +#456052 = CARTESIAN_POINT('',(153.951921,-148.382975,-7.5E-02)); +#456053 = LINE('',#456054,#456055); +#456054 = CARTESIAN_POINT('',(153.932017,-148.378184,-7.5E-02)); +#456055 = VECTOR('',#456056,1.); +#456056 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#456057 = ORIENTED_EDGE('',*,*,#456058,.T.); +#456058 = EDGE_CURVE('',#456051,#456059,#456061,.T.); +#456059 = VERTEX_POINT('',#456060); +#456060 = CARTESIAN_POINT('',(154.059751,-148.440365,-7.5E-02)); +#456061 = LINE('',#456062,#456063); +#456062 = CARTESIAN_POINT('',(153.951921,-148.382975,-7.5E-02)); +#456063 = VECTOR('',#456064,1.); +#456064 = DIRECTION('',(0.882758259515,-0.469827473928,0.)); +#456065 = ORIENTED_EDGE('',*,*,#456066,.T.); +#456066 = EDGE_CURVE('',#456059,#456067,#456069,.T.); +#456067 = VERTEX_POINT('',#456068); +#456068 = CARTESIAN_POINT('',(154.11714,-148.548192,-7.5E-02)); +#456069 = LINE('',#456070,#456071); +#456070 = CARTESIAN_POINT('',(154.059751,-148.440365,-7.5E-02)); +#456071 = VECTOR('',#456072,1.); +#456072 = DIRECTION('',(0.469831280532,-0.882756233528,0.)); +#456073 = ORIENTED_EDGE('',*,*,#456074,.T.); +#456074 = EDGE_CURVE('',#456067,#456075,#456077,.T.); +#456075 = VERTEX_POINT('',#456076); +#456076 = CARTESIAN_POINT('',(154.027697,-148.592913,-7.5E-02)); +#456077 = CIRCLE('',#456078,5.000004522505E-02); +#456078 = AXIS2_PLACEMENT_3D('',#456079,#456080,#456081); +#456079 = CARTESIAN_POINT('',(154.07241853675,-148.5705525735,-7.5E-02) + ); +#456080 = DIRECTION('',(0.,0.,-1.)); +#456081 = DIRECTION('',(0.894428455807,0.447211065876,0.)); +#456082 = ORIENTED_EDGE('',*,*,#456083,.T.); +#456083 = EDGE_CURVE('',#456075,#456084,#456086,.T.); +#456084 = VERTEX_POINT('',#456085); +#456085 = CARTESIAN_POINT('',(153.987532,-148.512582,-7.5E-02)); +#456086 = LINE('',#456087,#456088); +#456087 = CARTESIAN_POINT('',(154.027697,-148.592913,-7.5E-02)); +#456088 = VECTOR('',#456089,1.); +#456089 = DIRECTION('',(-0.447209141775,0.894429417849,0.)); +#456090 = ORIENTED_EDGE('',*,*,#456091,.T.); +#456091 = EDGE_CURVE('',#456084,#456092,#456094,.T.); +#456092 = VERTEX_POINT('',#456093); +#456093 = CARTESIAN_POINT('',(153.917759,-148.477696,-7.5E-02)); +#456094 = LINE('',#456095,#456096); +#456095 = CARTESIAN_POINT('',(153.987532,-148.512582,-7.5E-02)); +#456096 = VECTOR('',#456097,1.); +#456097 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#456098 = ORIENTED_EDGE('',*,*,#456099,.T.); +#456099 = EDGE_CURVE('',#456092,#456032,#456100,.T.); +#456100 = LINE('',#456101,#456102); +#456101 = CARTESIAN_POINT('',(153.917759,-148.477696,-7.5E-02)); +#456102 = VECTOR('',#456103,1.); +#456103 = DIRECTION('',(-1.,0.,0.)); +#456104 = PLANE('',#456105); +#456105 = AXIS2_PLACEMENT_3D('',#456106,#456107,#456108); +#456106 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456107 = DIRECTION('',(-0.,-0.,-1.)); +#456108 = DIRECTION('',(-1.,0.,0.)); +#456109 = SHELL_BASED_SURFACE_MODEL('',(#456110)); +#456110 = OPEN_SHELL('',(#456111)); +#456111 = ADVANCED_FACE('',(#456112),#456188,.T.); +#456112 = FACE_BOUND('',#456113,.T.); +#456113 = EDGE_LOOP('',(#456114,#456125,#456133,#456141,#456149,#456157, + #456166,#456174,#456182)); +#456114 = ORIENTED_EDGE('',*,*,#456115,.T.); +#456115 = EDGE_CURVE('',#456116,#456118,#456120,.T.); +#456116 = VERTEX_POINT('',#456117); +#456117 = CARTESIAN_POINT('',(153.072419,-147.953886,-7.5E-02)); +#456118 = VERTEX_POINT('',#456119); +#456119 = CARTESIAN_POINT('',(153.072419,-147.853886,-7.5E-02)); +#456120 = CIRCLE('',#456121,5.000000000004E-02); +#456121 = AXIS2_PLACEMENT_3D('',#456122,#456123,#456124); +#456122 = CARTESIAN_POINT('',(153.07241904771,-147.903886,-7.5E-02)); +#456123 = DIRECTION('',(0.,0.,-1.)); +#456124 = DIRECTION('',(-9.54237293626E-07,-1.,-0.)); +#456125 = ORIENTED_EDGE('',*,*,#456126,.T.); +#456126 = EDGE_CURVE('',#456118,#456127,#456129,.T.); +#456127 = VERTEX_POINT('',#456128); +#456128 = CARTESIAN_POINT('',(153.932017,-147.854374,-7.5E-02)); +#456129 = LINE('',#456130,#456131); +#456130 = CARTESIAN_POINT('',(153.072419,-147.853886,-7.5E-02)); +#456131 = VECTOR('',#456132,1.); +#456132 = DIRECTION('',(0.999999838854,-5.677071391271E-04,0.)); +#456133 = ORIENTED_EDGE('',*,*,#456134,.T.); +#456134 = EDGE_CURVE('',#456127,#456135,#456137,.T.); +#456135 = VERTEX_POINT('',#456136); +#456136 = CARTESIAN_POINT('',(153.951921,-147.859165,-7.5E-02)); +#456137 = LINE('',#456138,#456139); +#456138 = CARTESIAN_POINT('',(153.932017,-147.854374,-7.5E-02)); +#456139 = VECTOR('',#456140,1.); +#456140 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#456141 = ORIENTED_EDGE('',*,*,#456142,.T.); +#456142 = EDGE_CURVE('',#456135,#456143,#456145,.T.); +#456143 = VERTEX_POINT('',#456144); +#456144 = CARTESIAN_POINT('',(154.059751,-147.916555,-7.5E-02)); +#456145 = LINE('',#456146,#456147); +#456146 = CARTESIAN_POINT('',(153.951921,-147.859165,-7.5E-02)); +#456147 = VECTOR('',#456148,1.); +#456148 = DIRECTION('',(0.882758259516,-0.469827473927,0.)); +#456149 = ORIENTED_EDGE('',*,*,#456150,.T.); +#456150 = EDGE_CURVE('',#456143,#456151,#456153,.T.); +#456151 = VERTEX_POINT('',#456152); +#456152 = CARTESIAN_POINT('',(154.11714,-148.024382,-7.5E-02)); +#456153 = LINE('',#456154,#456155); +#456154 = CARTESIAN_POINT('',(154.059751,-147.916555,-7.5E-02)); +#456155 = VECTOR('',#456156,1.); +#456156 = DIRECTION('',(0.469831280532,-0.882756233528,0.)); +#456157 = ORIENTED_EDGE('',*,*,#456158,.T.); +#456158 = EDGE_CURVE('',#456151,#456159,#456161,.T.); +#456159 = VERTEX_POINT('',#456160); +#456160 = CARTESIAN_POINT('',(154.027697,-148.069103,-7.5E-02)); +#456161 = CIRCLE('',#456162,5.000004522506E-02); +#456162 = AXIS2_PLACEMENT_3D('',#456163,#456164,#456165); +#456163 = CARTESIAN_POINT('',(154.07241853675,-148.0467425735,-7.5E-02) + ); +#456164 = DIRECTION('',(0.,0.,-1.)); +#456165 = DIRECTION('',(0.894428455808,0.447211065876,0.)); +#456166 = ORIENTED_EDGE('',*,*,#456167,.T.); +#456167 = EDGE_CURVE('',#456159,#456168,#456170,.T.); +#456168 = VERTEX_POINT('',#456169); +#456169 = CARTESIAN_POINT('',(153.987532,-147.988772,-7.5E-02)); +#456170 = LINE('',#456171,#456172); +#456171 = CARTESIAN_POINT('',(154.027697,-148.069103,-7.5E-02)); +#456172 = VECTOR('',#456173,1.); +#456173 = DIRECTION('',(-0.447209141775,0.894429417849,0.)); +#456174 = ORIENTED_EDGE('',*,*,#456175,.T.); +#456175 = EDGE_CURVE('',#456168,#456176,#456178,.T.); +#456176 = VERTEX_POINT('',#456177); +#456177 = CARTESIAN_POINT('',(153.917759,-147.953886,-7.5E-02)); +#456178 = LINE('',#456179,#456180); +#456179 = CARTESIAN_POINT('',(153.987532,-147.988772,-7.5E-02)); +#456180 = VECTOR('',#456181,1.); +#456181 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#456182 = ORIENTED_EDGE('',*,*,#456183,.T.); +#456183 = EDGE_CURVE('',#456176,#456116,#456184,.T.); +#456184 = LINE('',#456185,#456186); +#456185 = CARTESIAN_POINT('',(153.917759,-147.953886,-7.5E-02)); +#456186 = VECTOR('',#456187,1.); +#456187 = DIRECTION('',(-1.,0.,0.)); +#456188 = PLANE('',#456189); +#456189 = AXIS2_PLACEMENT_3D('',#456190,#456191,#456192); +#456190 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456191 = DIRECTION('',(-0.,-0.,-1.)); +#456192 = DIRECTION('',(-1.,0.,0.)); +#456193 = SHELL_BASED_SURFACE_MODEL('',(#456194)); +#456194 = OPEN_SHELL('',(#456195)); +#456195 = ADVANCED_FACE('',(#456196),#456420,.T.); +#456196 = FACE_BOUND('',#456197,.T.); +#456197 = EDGE_LOOP('',(#456198,#456209,#456217,#456226,#456234,#456242, + #456250,#456258,#456266,#456274,#456282,#456291,#456299,#456307, + #456316,#456324,#456332,#456341,#456349,#456357,#456365,#456374, + #456382,#456390,#456398,#456406,#456414)); +#456198 = ORIENTED_EDGE('',*,*,#456199,.T.); +#456199 = EDGE_CURVE('',#456200,#456202,#456204,.T.); +#456200 = VERTEX_POINT('',#456201); +#456201 = CARTESIAN_POINT('',(151.776674,-147.045321,-7.5E-02)); +#456202 = VERTEX_POINT('',#456203); +#456203 = CARTESIAN_POINT('',(151.795808,-146.949127,-7.5E-02)); +#456204 = CIRCLE('',#456205,4.999998452108E-02); +#456205 = AXIS2_PLACEMENT_3D('',#456206,#456207,#456208); +#456206 = CARTESIAN_POINT('',(151.79580803736,-146.9991269845,-7.5E-02) + ); +#456207 = DIRECTION('',(0.,0.,-1.)); +#456208 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#456209 = ORIENTED_EDGE('',*,*,#456210,.T.); +#456210 = EDGE_CURVE('',#456202,#456211,#456213,.T.); +#456211 = VERTEX_POINT('',#456212); +#456212 = CARTESIAN_POINT('',(152.462475,-146.949127,-7.5E-02)); +#456213 = LINE('',#456214,#456215); +#456214 = CARTESIAN_POINT('',(151.795808,-146.949127,-7.5E-02)); +#456215 = VECTOR('',#456216,1.); +#456216 = DIRECTION('',(1.,0.,0.)); +#456217 = ORIENTED_EDGE('',*,*,#456218,.T.); +#456218 = EDGE_CURVE('',#456211,#456219,#456221,.T.); +#456219 = VERTEX_POINT('',#456220); +#456220 = CARTESIAN_POINT('',(152.462475,-147.049127,-7.5E-02)); +#456221 = CIRCLE('',#456222,5.000000000003E-02); +#456222 = AXIS2_PLACEMENT_3D('',#456223,#456224,#456225); +#456223 = CARTESIAN_POINT('',(152.46247495228,-146.999127,-7.5E-02)); +#456224 = DIRECTION('',(0.,0.,-1.)); +#456225 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#456226 = ORIENTED_EDGE('',*,*,#456227,.T.); +#456227 = EDGE_CURVE('',#456219,#456228,#456230,.T.); +#456228 = VERTEX_POINT('',#456229); +#456229 = CARTESIAN_POINT('',(151.911757,-147.049127,-7.5E-02)); +#456230 = LINE('',#456231,#456232); +#456231 = CARTESIAN_POINT('',(152.462475,-147.049127,-7.5E-02)); +#456232 = VECTOR('',#456233,1.); +#456233 = DIRECTION('',(-1.,0.,0.)); +#456234 = ORIENTED_EDGE('',*,*,#456235,.T.); +#456235 = EDGE_CURVE('',#456228,#456236,#456238,.T.); +#456236 = VERTEX_POINT('',#456237); +#456237 = CARTESIAN_POINT('',(151.884519,-147.076363,-7.5E-02)); +#456238 = LINE('',#456239,#456240); +#456239 = CARTESIAN_POINT('',(151.911757,-147.049127,-7.5E-02)); +#456240 = VECTOR('',#456241,1.); +#456241 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#456242 = ORIENTED_EDGE('',*,*,#456243,.T.); +#456243 = EDGE_CURVE('',#456236,#456244,#456246,.T.); +#456244 = VERTEX_POINT('',#456245); +#456245 = CARTESIAN_POINT('',(151.845808,-147.153787,-7.5E-02)); +#456246 = LINE('',#456247,#456248); +#456247 = CARTESIAN_POINT('',(151.884519,-147.076363,-7.5E-02)); +#456248 = VECTOR('',#456249,1.); +#456249 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#456250 = ORIENTED_EDGE('',*,*,#456251,.T.); +#456251 = EDGE_CURVE('',#456244,#456252,#456254,.T.); +#456252 = VERTEX_POINT('',#456253); +#456253 = CARTESIAN_POINT('',(151.845808,-147.273038,-7.5E-02)); +#456254 = LINE('',#456255,#456256); +#456255 = CARTESIAN_POINT('',(151.845808,-147.153787,-7.5E-02)); +#456256 = VECTOR('',#456257,1.); +#456257 = DIRECTION('',(0.,-1.,0.)); +#456258 = ORIENTED_EDGE('',*,*,#456259,.T.); +#456259 = EDGE_CURVE('',#456252,#456260,#456262,.T.); +#456260 = VERTEX_POINT('',#456261); +#456261 = CARTESIAN_POINT('',(151.880694,-147.342811,-7.5E-02)); +#456262 = LINE('',#456263,#456264); +#456263 = CARTESIAN_POINT('',(151.845808,-147.273038,-7.5E-02)); +#456264 = VECTOR('',#456265,1.); +#456265 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#456266 = ORIENTED_EDGE('',*,*,#456267,.T.); +#456267 = EDGE_CURVE('',#456260,#456268,#456270,.T.); +#456268 = VERTEX_POINT('',#456269); +#456269 = CARTESIAN_POINT('',(151.950469,-147.377698,-7.5E-02)); +#456270 = LINE('',#456271,#456272); +#456271 = CARTESIAN_POINT('',(151.880694,-147.342811,-7.5E-02)); +#456272 = VECTOR('',#456273,1.); +#456273 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#456274 = ORIENTED_EDGE('',*,*,#456275,.T.); +#456275 = EDGE_CURVE('',#456268,#456276,#456278,.T.); +#456276 = VERTEX_POINT('',#456277); +#456277 = CARTESIAN_POINT('',(152.462475,-147.377698,-7.5E-02)); +#456278 = LINE('',#456279,#456280); +#456279 = CARTESIAN_POINT('',(151.950469,-147.377698,-7.5E-02)); +#456280 = VECTOR('',#456281,1.); +#456281 = DIRECTION('',(1.,0.,0.)); +#456282 = ORIENTED_EDGE('',*,*,#456283,.T.); +#456283 = EDGE_CURVE('',#456276,#456284,#456286,.T.); +#456284 = VERTEX_POINT('',#456285); +#456285 = CARTESIAN_POINT('',(152.462475,-147.477698,-7.5E-02)); +#456286 = CIRCLE('',#456287,5.000000000002E-02); +#456287 = AXIS2_PLACEMENT_3D('',#456288,#456289,#456290); +#456288 = CARTESIAN_POINT('',(152.46247495228,-147.427698,-7.5E-02)); +#456289 = DIRECTION('',(0.,0.,-1.)); +#456290 = DIRECTION('',(9.542367251923E-07,1.,0.)); +#456291 = ORIENTED_EDGE('',*,*,#456292,.T.); +#456292 = EDGE_CURVE('',#456284,#456293,#456295,.T.); +#456293 = VERTEX_POINT('',#456294); +#456294 = CARTESIAN_POINT('',(151.950469,-147.477698,-7.5E-02)); +#456295 = LINE('',#456296,#456297); +#456296 = CARTESIAN_POINT('',(152.462475,-147.477698,-7.5E-02)); +#456297 = VECTOR('',#456298,1.); +#456298 = DIRECTION('',(-1.,0.,0.)); +#456299 = ORIENTED_EDGE('',*,*,#456300,.T.); +#456300 = EDGE_CURVE('',#456293,#456301,#456303,.T.); +#456301 = VERTEX_POINT('',#456302); +#456302 = CARTESIAN_POINT('',(151.880694,-147.512584,-7.5E-02)); +#456303 = LINE('',#456304,#456305); +#456304 = CARTESIAN_POINT('',(151.950469,-147.477698,-7.5E-02)); +#456305 = VECTOR('',#456306,1.); +#456306 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#456307 = ORIENTED_EDGE('',*,*,#456308,.T.); +#456308 = EDGE_CURVE('',#456301,#456309,#456311,.T.); +#456309 = VERTEX_POINT('',#456310); +#456310 = CARTESIAN_POINT('',(151.880694,-147.771383,-7.5E-02)); +#456311 = CIRCLE('',#456312,0.214910383045); +#456312 = AXIS2_PLACEMENT_3D('',#456313,#456314,#456315); +#456313 = CARTESIAN_POINT('',(152.05228141836,-147.6419835,-7.5E-02)); +#456314 = DIRECTION('',(0.,0.,1.)); +#456315 = DIRECTION('',(-0.798413812918,0.602109112489,0.)); +#456316 = ORIENTED_EDGE('',*,*,#456317,.T.); +#456317 = EDGE_CURVE('',#456309,#456318,#456320,.T.); +#456318 = VERTEX_POINT('',#456319); +#456319 = CARTESIAN_POINT('',(151.950469,-147.80627,-7.5E-02)); +#456320 = LINE('',#456321,#456322); +#456321 = CARTESIAN_POINT('',(151.880694,-147.771383,-7.5E-02)); +#456322 = VECTOR('',#456323,1.); +#456323 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#456324 = ORIENTED_EDGE('',*,*,#456325,.T.); +#456325 = EDGE_CURVE('',#456318,#456326,#456328,.T.); +#456326 = VERTEX_POINT('',#456327); +#456327 = CARTESIAN_POINT('',(152.462475,-147.80627,-7.5E-02)); +#456328 = LINE('',#456329,#456330); +#456329 = CARTESIAN_POINT('',(151.950469,-147.80627,-7.5E-02)); +#456330 = VECTOR('',#456331,1.); +#456331 = DIRECTION('',(1.,0.,0.)); +#456332 = ORIENTED_EDGE('',*,*,#456333,.T.); +#456333 = EDGE_CURVE('',#456326,#456334,#456336,.T.); +#456334 = VERTEX_POINT('',#456335); +#456335 = CARTESIAN_POINT('',(152.462475,-147.90627,-7.5E-02)); +#456336 = CIRCLE('',#456337,5.000000000002E-02); +#456337 = AXIS2_PLACEMENT_3D('',#456338,#456339,#456340); +#456338 = CARTESIAN_POINT('',(152.46247495228,-147.85627,-7.5E-02)); +#456339 = DIRECTION('',(0.,0.,-1.)); +#456340 = DIRECTION('',(9.542367251918E-07,1.,0.)); +#456341 = ORIENTED_EDGE('',*,*,#456342,.T.); +#456342 = EDGE_CURVE('',#456334,#456343,#456345,.T.); +#456343 = VERTEX_POINT('',#456344); +#456344 = CARTESIAN_POINT('',(151.927392,-147.904027,-7.5E-02)); +#456345 = LINE('',#456346,#456347); +#456346 = CARTESIAN_POINT('',(152.462475,-147.90627,-7.5E-02)); +#456347 = VECTOR('',#456348,1.); +#456348 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#456349 = ORIENTED_EDGE('',*,*,#456350,.T.); +#456350 = EDGE_CURVE('',#456343,#456351,#456353,.T.); +#456351 = VERTEX_POINT('',#456352); +#456352 = CARTESIAN_POINT('',(151.810667,-147.846423,-7.5E-02)); +#456353 = LINE('',#456354,#456355); +#456354 = CARTESIAN_POINT('',(151.927392,-147.904027,-7.5E-02)); +#456355 = VECTOR('',#456356,1.); +#456356 = DIRECTION('',(-0.896745928687,0.44254574835,0.)); +#456357 = ORIENTED_EDGE('',*,*,#456358,.T.); +#456358 = EDGE_CURVE('',#456351,#456359,#456361,.T.); +#456359 = VERTEX_POINT('',#456360); +#456360 = CARTESIAN_POINT('',(151.798705,-147.831011,-7.5E-02)); +#456361 = LINE('',#456362,#456363); +#456362 = CARTESIAN_POINT('',(151.810667,-147.846423,-7.5E-02)); +#456363 = VECTOR('',#456364,1.); +#456364 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#456365 = ORIENTED_EDGE('',*,*,#456366,.T.); +#456366 = EDGE_CURVE('',#456359,#456367,#456369,.T.); +#456367 = VERTEX_POINT('',#456368); +#456368 = CARTESIAN_POINT('',(151.805654,-147.442557,-7.5E-02)); +#456369 = CIRCLE('',#456370,0.322687307627); +#456370 = AXIS2_PLACEMENT_3D('',#456371,#456372,#456373); +#456371 = CARTESIAN_POINT('',(152.05980259635,-147.641392584,-7.5E-02)); +#456372 = DIRECTION('',(0.,0.,-1.)); +#456373 = DIRECTION('',(-0.809135005275,-0.587622789924,-0.)); +#456374 = ORIENTED_EDGE('',*,*,#456375,.T.); +#456375 = EDGE_CURVE('',#456367,#456376,#456378,.T.); +#456376 = VERTEX_POINT('',#456377); +#456377 = CARTESIAN_POINT('',(151.826862,-147.427698,-7.5E-02)); +#456378 = LINE('',#456379,#456380); +#456379 = CARTESIAN_POINT('',(151.805654,-147.442557,-7.5E-02)); +#456380 = VECTOR('',#456381,1.); +#456381 = DIRECTION('',(0.818988741404,0.573809586407,0.)); +#456382 = ORIENTED_EDGE('',*,*,#456383,.T.); +#456383 = EDGE_CURVE('',#456376,#456384,#456386,.T.); +#456384 = VERTEX_POINT('',#456385); +#456385 = CARTESIAN_POINT('',(151.804808,-147.410303,-7.5E-02)); +#456386 = LINE('',#456387,#456388); +#456387 = CARTESIAN_POINT('',(151.826862,-147.427698,-7.5E-02)); +#456388 = VECTOR('',#456389,1.); +#456389 = DIRECTION('',(-0.78516063526,0.619292157901,0.)); +#456390 = ORIENTED_EDGE('',*,*,#456391,.T.); +#456391 = EDGE_CURVE('',#456384,#456392,#456394,.T.); +#456392 = VERTEX_POINT('',#456393); +#456393 = CARTESIAN_POINT('',(151.74805,-147.296113,-7.5E-02)); +#456394 = LINE('',#456395,#456396); +#456395 = CARTESIAN_POINT('',(151.804808,-147.410303,-7.5E-02)); +#456396 = VECTOR('',#456397,1.); +#456397 = DIRECTION('',(-0.44509813391,0.895481798358,0.)); +#456398 = ORIENTED_EDGE('',*,*,#456399,.T.); +#456399 = EDGE_CURVE('',#456392,#456400,#456402,.T.); +#456400 = VERTEX_POINT('',#456401); +#456401 = CARTESIAN_POINT('',(151.74805,-147.130711,-7.5E-02)); +#456402 = LINE('',#456403,#456404); +#456403 = CARTESIAN_POINT('',(151.74805,-147.296113,-7.5E-02)); +#456404 = VECTOR('',#456405,1.); +#456405 = DIRECTION('',(0.,1.,0.)); +#456406 = ORIENTED_EDGE('',*,*,#456407,.T.); +#456407 = EDGE_CURVE('',#456400,#456408,#456410,.T.); +#456408 = VERTEX_POINT('',#456409); +#456409 = CARTESIAN_POINT('',(151.787191,-147.047413,-7.5E-02)); +#456410 = LINE('',#456411,#456412); +#456411 = CARTESIAN_POINT('',(151.74805,-147.130711,-7.5E-02)); +#456412 = VECTOR('',#456413,1.); +#456413 = DIRECTION('',(0.425280509062,0.905061593822,0.)); +#456414 = ORIENTED_EDGE('',*,*,#456415,.T.); +#456415 = EDGE_CURVE('',#456408,#456200,#456416,.T.); +#456416 = LINE('',#456417,#456418); +#456417 = CARTESIAN_POINT('',(151.787191,-147.047413,-7.5E-02)); +#456418 = VECTOR('',#456419,1.); +#456419 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#456420 = PLANE('',#456421); +#456421 = AXIS2_PLACEMENT_3D('',#456422,#456423,#456424); +#456422 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456423 = DIRECTION('',(-0.,-0.,-1.)); +#456424 = DIRECTION('',(-1.,0.,0.)); +#456425 = SHELL_BASED_SURFACE_MODEL('',(#456426)); +#456426 = OPEN_SHELL('',(#456427)); +#456427 = ADVANCED_FACE('',(#456428,#456505),#456582,.T.); +#456428 = FACE_BOUND('',#456429,.T.); +#456429 = EDGE_LOOP('',(#456430,#456441,#456449,#456457,#456465,#456474, + #456482,#456490,#456499)); +#456430 = ORIENTED_EDGE('',*,*,#456431,.T.); +#456431 = EDGE_CURVE('',#456432,#456434,#456436,.T.); +#456432 = VERTEX_POINT('',#456433); +#456433 = CARTESIAN_POINT('',(153.408649,-147.402436,-7.5E-02)); +#456434 = VERTEX_POINT('',#456435); +#456435 = CARTESIAN_POINT('',(153.584955,-146.903747,-7.5E-02)); +#456436 = CIRCLE('',#456437,0.320678184363); +#456437 = AXIS2_PLACEMENT_3D('',#456438,#456439,#456440); +#456438 = CARTESIAN_POINT('',(153.66778910741,-147.2135421074,-7.5E-02) + ); +#456439 = DIRECTION('',(0.,0.,-1.)); +#456440 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#456441 = ORIENTED_EDGE('',*,*,#456442,.T.); +#456442 = EDGE_CURVE('',#456434,#456443,#456445,.T.); +#456443 = VERTEX_POINT('',#456444); +#456444 = CARTESIAN_POINT('',(153.884398,-146.901993,-7.5E-02)); +#456445 = LINE('',#456446,#456447); +#456446 = CARTESIAN_POINT('',(153.584955,-146.903747,-7.5E-02)); +#456447 = VECTOR('',#456448,1.); +#456448 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#456449 = ORIENTED_EDGE('',*,*,#456450,.T.); +#456450 = EDGE_CURVE('',#456443,#456451,#456453,.T.); +#456451 = VERTEX_POINT('',#456452); +#456452 = CARTESIAN_POINT('',(153.904303,-146.906784,-7.5E-02)); +#456453 = LINE('',#456454,#456455); +#456454 = CARTESIAN_POINT('',(153.884398,-146.901993,-7.5E-02)); +#456455 = VECTOR('',#456456,1.); +#456456 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#456457 = ORIENTED_EDGE('',*,*,#456458,.T.); +#456458 = EDGE_CURVE('',#456451,#456459,#456461,.T.); +#456459 = VERTEX_POINT('',#456460); +#456460 = CARTESIAN_POINT('',(154.012535,-146.963768,-7.5E-02)); +#456461 = LINE('',#456462,#456463); +#456462 = CARTESIAN_POINT('',(153.904303,-146.906784,-7.5E-02)); +#456463 = VECTOR('',#456464,1.); +#456464 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#456465 = ORIENTED_EDGE('',*,*,#456466,.T.); +#456466 = EDGE_CURVE('',#456459,#456467,#456469,.T.); +#456467 = VERTEX_POINT('',#456468); +#456468 = CARTESIAN_POINT('',(154.120176,-147.29611,-7.5E-02)); +#456469 = CIRCLE('',#456470,0.323553911777); +#456470 = AXIS2_PLACEMENT_3D('',#456471,#456472,#456473); +#456471 = CARTESIAN_POINT('',(153.80725115022,-147.213859333,-7.5E-02)); +#456472 = DIRECTION('',(0.,0.,-1.)); +#456473 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#456474 = ORIENTED_EDGE('',*,*,#456475,.T.); +#456475 = EDGE_CURVE('',#456467,#456476,#456478,.T.); +#456476 = VERTEX_POINT('',#456477); +#456477 = CARTESIAN_POINT('',(154.060155,-147.415432,-7.5E-02)); +#456478 = LINE('',#456479,#456480); +#456479 = CARTESIAN_POINT('',(154.120176,-147.29611,-7.5E-02)); +#456480 = VECTOR('',#456481,1.); +#456481 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#456482 = ORIENTED_EDGE('',*,*,#456483,.T.); +#456483 = EDGE_CURVE('',#456476,#456484,#456486,.T.); +#456484 = VERTEX_POINT('',#456485); +#456485 = CARTESIAN_POINT('',(153.99954,-147.472417,-7.5E-02)); +#456486 = LINE('',#456487,#456488); +#456487 = CARTESIAN_POINT('',(154.060155,-147.415432,-7.5E-02)); +#456488 = VECTOR('',#456489,1.); +#456489 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#456490 = ORIENTED_EDGE('',*,*,#456491,.T.); +#456491 = EDGE_CURVE('',#456484,#456492,#456494,.T.); +#456492 = VERTEX_POINT('',#456493); +#456493 = CARTESIAN_POINT('',(153.465634,-147.46305,-7.5E-02)); +#456494 = CIRCLE('',#456495,0.484201554455); +#456495 = AXIS2_PLACEMENT_3D('',#456496,#456497,#456498); +#456496 = CARTESIAN_POINT('',(153.73967270064,-147.063858397,-7.5E-02)); +#456497 = DIRECTION('',(-0.,0.,-1.)); +#456498 = DIRECTION('',(0.536692410344,-0.843777966457,-0.)); +#456499 = ORIENTED_EDGE('',*,*,#456500,.T.); +#456500 = EDGE_CURVE('',#456492,#456432,#456501,.T.); +#456501 = LINE('',#456502,#456503); +#456502 = CARTESIAN_POINT('',(153.465634,-147.46305,-7.5E-02)); +#456503 = VECTOR('',#456504,1.); +#456504 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#456505 = FACE_BOUND('',#456506,.T.); +#456506 = EDGE_LOOP('',(#456507,#456518,#456526,#456535,#456543,#456551, + #456560,#456568,#456576)); +#456507 = ORIENTED_EDGE('',*,*,#456508,.T.); +#456508 = EDGE_CURVE('',#456509,#456511,#456513,.T.); +#456509 = VERTEX_POINT('',#456510); +#456510 = CARTESIAN_POINT('',(153.947561,-147.040216,-7.5E-02)); +#456511 = VERTEX_POINT('',#456512); +#456512 = CARTESIAN_POINT('',(153.530608,-147.040216,-7.5E-02)); +#456513 = CIRCLE('',#456514,0.382072162856); +#456514 = AXIS2_PLACEMENT_3D('',#456515,#456516,#456517); +#456515 = CARTESIAN_POINT('',(153.7390845,-147.3603982708,-7.5E-02)); +#456516 = DIRECTION('',(0.,0.,1.)); +#456517 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#456518 = ORIENTED_EDGE('',*,*,#456519,.T.); +#456519 = EDGE_CURVE('',#456511,#456520,#456522,.T.); +#456520 = VERTEX_POINT('',#456521); +#456521 = CARTESIAN_POINT('',(153.494463,-147.07636,-7.5E-02)); +#456522 = LINE('',#456523,#456524); +#456523 = CARTESIAN_POINT('',(153.530608,-147.040216,-7.5E-02)); +#456524 = VECTOR('',#456525,1.); +#456525 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#456526 = ORIENTED_EDGE('',*,*,#456527,.T.); +#456527 = EDGE_CURVE('',#456520,#456528,#456530,.T.); +#456528 = VERTEX_POINT('',#456529); +#456529 = CARTESIAN_POINT('',(153.530608,-147.386602,-7.5E-02)); +#456530 = CIRCLE('',#456531,0.222710800783); +#456531 = AXIS2_PLACEMENT_3D('',#456532,#456533,#456534); +#456532 = CARTESIAN_POINT('',(153.67024834013,-147.2131065355,-7.5E-02) + ); +#456533 = DIRECTION('',(0.,0.,1.)); +#456534 = DIRECTION('',(-0.78929867576,0.614009446543,0.)); +#456535 = ORIENTED_EDGE('',*,*,#456536,.T.); +#456536 = EDGE_CURVE('',#456528,#456537,#456539,.T.); +#456537 = VERTEX_POINT('',#456538); +#456538 = CARTESIAN_POINT('',(153.608032,-147.425314,-7.5E-02)); +#456539 = LINE('',#456540,#456541); +#456540 = CARTESIAN_POINT('',(153.530608,-147.386602,-7.5E-02)); +#456541 = VECTOR('',#456542,1.); +#456542 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#456543 = ORIENTED_EDGE('',*,*,#456544,.T.); +#456544 = EDGE_CURVE('',#456537,#456545,#456547,.T.); +#456545 = VERTEX_POINT('',#456546); +#456546 = CARTESIAN_POINT('',(153.870139,-147.425314,-7.5E-02)); +#456547 = LINE('',#456548,#456549); +#456548 = CARTESIAN_POINT('',(153.608032,-147.425314,-7.5E-02)); +#456549 = VECTOR('',#456550,1.); +#456550 = DIRECTION('',(1.,0.,0.)); +#456551 = ORIENTED_EDGE('',*,*,#456552,.T.); +#456552 = EDGE_CURVE('',#456545,#456553,#456555,.T.); +#456553 = VERTEX_POINT('',#456554); +#456554 = CARTESIAN_POINT('',(154.022419,-147.273034,-7.5E-02)); +#456555 = CIRCLE('',#456556,0.215072998571); +#456556 = AXIS2_PLACEMENT_3D('',#456557,#456558,#456559); +#456557 = CARTESIAN_POINT('',(153.81463213236,-147.2175271323,-7.5E-02) + ); +#456558 = DIRECTION('',(0.,0.,1.)); +#456559 = DIRECTION('',(0.258083850599,-0.966122521247,0.)); +#456560 = ORIENTED_EDGE('',*,*,#456561,.T.); +#456561 = EDGE_CURVE('',#456553,#456562,#456564,.T.); +#456562 = VERTEX_POINT('',#456563); +#456563 = CARTESIAN_POINT('',(154.022419,-147.153784,-7.5E-02)); +#456564 = LINE('',#456565,#456566); +#456565 = CARTESIAN_POINT('',(154.022419,-147.273034,-7.5E-02)); +#456566 = VECTOR('',#456567,1.); +#456567 = DIRECTION('',(0.,1.,0.)); +#456568 = ORIENTED_EDGE('',*,*,#456569,.T.); +#456569 = EDGE_CURVE('',#456562,#456570,#456572,.T.); +#456570 = VERTEX_POINT('',#456571); +#456571 = CARTESIAN_POINT('',(153.983708,-147.076362,-7.5E-02)); +#456572 = LINE('',#456573,#456574); +#456573 = CARTESIAN_POINT('',(154.022419,-147.153784,-7.5E-02)); +#456574 = VECTOR('',#456575,1.); +#456575 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#456576 = ORIENTED_EDGE('',*,*,#456577,.T.); +#456577 = EDGE_CURVE('',#456570,#456509,#456578,.T.); +#456578 = LINE('',#456579,#456580); +#456579 = CARTESIAN_POINT('',(153.983708,-147.076362,-7.5E-02)); +#456580 = VECTOR('',#456581,1.); +#456581 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#456582 = PLANE('',#456583); +#456583 = AXIS2_PLACEMENT_3D('',#456584,#456585,#456586); +#456584 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456585 = DIRECTION('',(-0.,-0.,-1.)); +#456586 = DIRECTION('',(-1.,0.,0.)); +#456587 = SHELL_BASED_SURFACE_MODEL('',(#456588)); +#456588 = OPEN_SHELL('',(#456589)); +#456589 = ADVANCED_FACE('',(#456590),#456684,.T.); +#456590 = FACE_BOUND('',#456591,.T.); +#456591 = EDGE_LOOP('',(#456592,#456603,#456611,#456620,#456628,#456637, + #456645,#456654,#456662,#456670,#456678)); +#456592 = ORIENTED_EDGE('',*,*,#456593,.T.); +#456593 = EDGE_CURVE('',#456594,#456596,#456598,.T.); +#456594 = VERTEX_POINT('',#456595); +#456595 = CARTESIAN_POINT('',(153.386618,-146.42627,-7.5E-02)); +#456596 = VERTEX_POINT('',#456597); +#456597 = CARTESIAN_POINT('',(153.405752,-146.330076,-7.5E-02)); +#456598 = CIRCLE('',#456599,4.999998452108E-02); +#456599 = AXIS2_PLACEMENT_3D('',#456600,#456601,#456602); +#456600 = CARTESIAN_POINT('',(153.40575203736,-146.3800759845,-7.5E-02) + ); +#456601 = DIRECTION('',(0.,0.,-1.)); +#456602 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#456603 = ORIENTED_EDGE('',*,*,#456604,.T.); +#456604 = EDGE_CURVE('',#456596,#456605,#456607,.T.); +#456605 = VERTEX_POINT('',#456606); +#456606 = CARTESIAN_POINT('',(154.072419,-146.330076,-7.5E-02)); +#456607 = LINE('',#456608,#456609); +#456608 = CARTESIAN_POINT('',(153.405752,-146.330076,-7.5E-02)); +#456609 = VECTOR('',#456610,1.); +#456610 = DIRECTION('',(1.,0.,0.)); +#456611 = ORIENTED_EDGE('',*,*,#456612,.T.); +#456612 = EDGE_CURVE('',#456605,#456613,#456615,.T.); +#456613 = VERTEX_POINT('',#456614); +#456614 = CARTESIAN_POINT('',(154.072419,-146.430076,-7.5E-02)); +#456615 = CIRCLE('',#456616,5.000000000003E-02); +#456616 = AXIS2_PLACEMENT_3D('',#456617,#456618,#456619); +#456617 = CARTESIAN_POINT('',(154.07241895228,-146.380076,-7.5E-02)); +#456618 = DIRECTION('',(0.,0.,-1.)); +#456619 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#456620 = ORIENTED_EDGE('',*,*,#456621,.T.); +#456621 = EDGE_CURVE('',#456613,#456622,#456624,.T.); +#456622 = VERTEX_POINT('',#456623); +#456623 = CARTESIAN_POINT('',(153.608032,-146.430076,-7.5E-02)); +#456624 = LINE('',#456625,#456626); +#456625 = CARTESIAN_POINT('',(154.072419,-146.430076,-7.5E-02)); +#456626 = VECTOR('',#456627,1.); +#456627 = DIRECTION('',(-1.,0.,0.)); +#456628 = ORIENTED_EDGE('',*,*,#456629,.T.); +#456629 = EDGE_CURVE('',#456622,#456630,#456632,.T.); +#456630 = VERTEX_POINT('',#456631); +#456631 = CARTESIAN_POINT('',(153.455752,-146.582355,-7.5E-02)); +#456632 = CIRCLE('',#456633,0.215060043145); +#456633 = AXIS2_PLACEMENT_3D('',#456634,#456635,#456636); +#456634 = CARTESIAN_POINT('',(153.66352799719,-146.6378523616,-7.5E-02) + ); +#456635 = DIRECTION('',(0.,0.,1.)); +#456636 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#456637 = ORIENTED_EDGE('',*,*,#456638,.T.); +#456638 = EDGE_CURVE('',#456630,#456639,#456641,.T.); +#456639 = VERTEX_POINT('',#456640); +#456640 = CARTESIAN_POINT('',(153.455752,-146.66579,-7.5E-02)); +#456641 = LINE('',#456642,#456643); +#456642 = CARTESIAN_POINT('',(153.455752,-146.582355,-7.5E-02)); +#456643 = VECTOR('',#456644,1.); +#456644 = DIRECTION('',(0.,-1.,0.)); +#456645 = ORIENTED_EDGE('',*,*,#456646,.T.); +#456646 = EDGE_CURVE('',#456639,#456647,#456649,.T.); +#456647 = VERTEX_POINT('',#456648); +#456648 = CARTESIAN_POINT('',(153.355752,-146.66579,-7.5E-02)); +#456649 = CIRCLE('',#456650,5.000000000002E-02); +#456650 = AXIS2_PLACEMENT_3D('',#456651,#456652,#456653); +#456651 = CARTESIAN_POINT('',(153.405752,-146.6657899522,-7.5E-02)); +#456652 = DIRECTION('',(-0.,0.,-1.)); +#456653 = DIRECTION('',(1.,-9.542361567576E-07,-0.)); +#456654 = ORIENTED_EDGE('',*,*,#456655,.T.); +#456655 = EDGE_CURVE('',#456647,#456656,#456658,.T.); +#456656 = VERTEX_POINT('',#456657); +#456657 = CARTESIAN_POINT('',(153.357994,-146.559279,-7.5E-02)); +#456658 = LINE('',#456659,#456660); +#456659 = CARTESIAN_POINT('',(153.355752,-146.66579,-7.5E-02)); +#456660 = VECTOR('',#456661,1.); +#456661 = DIRECTION('',(2.104480731704E-02,0.999778533519,0.)); +#456662 = ORIENTED_EDGE('',*,*,#456663,.T.); +#456663 = EDGE_CURVE('',#456656,#456664,#456666,.T.); +#456664 = VERTEX_POINT('',#456665); +#456665 = CARTESIAN_POINT('',(153.418016,-146.439959,-7.5E-02)); +#456666 = LINE('',#456667,#456668); +#456667 = CARTESIAN_POINT('',(153.357994,-146.559279,-7.5E-02)); +#456668 = VECTOR('',#456669,1.); +#456669 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#456670 = ORIENTED_EDGE('',*,*,#456671,.T.); +#456671 = EDGE_CURVE('',#456664,#456672,#456674,.T.); +#456672 = VERTEX_POINT('',#456673); +#456673 = CARTESIAN_POINT('',(153.427899,-146.430076,-7.5E-02)); +#456674 = LINE('',#456675,#456676); +#456675 = CARTESIAN_POINT('',(153.418016,-146.439959,-7.5E-02)); +#456676 = VECTOR('',#456677,1.); +#456677 = DIRECTION('',(0.707106781188,0.707106781186,0.)); +#456678 = ORIENTED_EDGE('',*,*,#456679,.T.); +#456679 = EDGE_CURVE('',#456672,#456594,#456680,.T.); +#456680 = LINE('',#456681,#456682); +#456681 = CARTESIAN_POINT('',(153.427899,-146.430076,-7.5E-02)); +#456682 = VECTOR('',#456683,1.); +#456683 = DIRECTION('',(-0.995776727161,9.180800425376E-02,0.)); +#456684 = PLANE('',#456685); +#456685 = AXIS2_PLACEMENT_3D('',#456686,#456687,#456688); +#456686 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456687 = DIRECTION('',(-0.,-0.,-1.)); +#456688 = DIRECTION('',(-1.,0.,0.)); +#456689 = SHELL_BASED_SURFACE_MODEL('',(#456690)); +#456690 = OPEN_SHELL('',(#456691)); +#456691 = ADVANCED_FACE('',(#456692,#456769),#456846,.T.); +#456692 = FACE_BOUND('',#456693,.T.); +#456693 = EDGE_LOOP('',(#456694,#456705,#456713,#456721,#456729,#456738, + #456746,#456754,#456763)); +#456694 = ORIENTED_EDGE('',*,*,#456695,.T.); +#456695 = EDGE_CURVE('',#456696,#456698,#456700,.T.); +#456696 = VERTEX_POINT('',#456697); +#456697 = CARTESIAN_POINT('',(151.798705,-146.497677,-7.5E-02)); +#456698 = VERTEX_POINT('',#456699); +#456699 = CARTESIAN_POINT('',(151.975011,-145.998988,-7.5E-02)); +#456700 = CIRCLE('',#456701,0.320678184363); +#456701 = AXIS2_PLACEMENT_3D('',#456702,#456703,#456704); +#456702 = CARTESIAN_POINT('',(152.05784510741,-146.3087831074,-7.5E-02) + ); +#456703 = DIRECTION('',(0.,0.,-1.)); +#456704 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#456705 = ORIENTED_EDGE('',*,*,#456706,.T.); +#456706 = EDGE_CURVE('',#456698,#456707,#456709,.T.); +#456707 = VERTEX_POINT('',#456708); +#456708 = CARTESIAN_POINT('',(152.274454,-145.997234,-7.5E-02)); +#456709 = LINE('',#456710,#456711); +#456710 = CARTESIAN_POINT('',(151.975011,-145.998988,-7.5E-02)); +#456711 = VECTOR('',#456712,1.); +#456712 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#456713 = ORIENTED_EDGE('',*,*,#456714,.T.); +#456714 = EDGE_CURVE('',#456707,#456715,#456717,.T.); +#456715 = VERTEX_POINT('',#456716); +#456716 = CARTESIAN_POINT('',(152.294359,-146.002025,-7.5E-02)); +#456717 = LINE('',#456718,#456719); +#456718 = CARTESIAN_POINT('',(152.274454,-145.997234,-7.5E-02)); +#456719 = VECTOR('',#456720,1.); +#456720 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#456721 = ORIENTED_EDGE('',*,*,#456722,.T.); +#456722 = EDGE_CURVE('',#456715,#456723,#456725,.T.); +#456723 = VERTEX_POINT('',#456724); +#456724 = CARTESIAN_POINT('',(152.402591,-146.059009,-7.5E-02)); +#456725 = LINE('',#456726,#456727); +#456726 = CARTESIAN_POINT('',(152.294359,-146.002025,-7.5E-02)); +#456727 = VECTOR('',#456728,1.); +#456728 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#456729 = ORIENTED_EDGE('',*,*,#456730,.T.); +#456730 = EDGE_CURVE('',#456723,#456731,#456733,.T.); +#456731 = VERTEX_POINT('',#456732); +#456732 = CARTESIAN_POINT('',(152.510232,-146.391351,-7.5E-02)); +#456733 = CIRCLE('',#456734,0.323553911777); +#456734 = AXIS2_PLACEMENT_3D('',#456735,#456736,#456737); +#456735 = CARTESIAN_POINT('',(152.19730715022,-146.309100333,-7.5E-02)); +#456736 = DIRECTION('',(0.,0.,-1.)); +#456737 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#456738 = ORIENTED_EDGE('',*,*,#456739,.T.); +#456739 = EDGE_CURVE('',#456731,#456740,#456742,.T.); +#456740 = VERTEX_POINT('',#456741); +#456741 = CARTESIAN_POINT('',(152.450211,-146.510673,-7.5E-02)); +#456742 = LINE('',#456743,#456744); +#456743 = CARTESIAN_POINT('',(152.510232,-146.391351,-7.5E-02)); +#456744 = VECTOR('',#456745,1.); +#456745 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#456746 = ORIENTED_EDGE('',*,*,#456747,.T.); +#456747 = EDGE_CURVE('',#456740,#456748,#456750,.T.); +#456748 = VERTEX_POINT('',#456749); +#456749 = CARTESIAN_POINT('',(152.389596,-146.567658,-7.5E-02)); +#456750 = LINE('',#456751,#456752); +#456751 = CARTESIAN_POINT('',(152.450211,-146.510673,-7.5E-02)); +#456752 = VECTOR('',#456753,1.); +#456753 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#456754 = ORIENTED_EDGE('',*,*,#456755,.T.); +#456755 = EDGE_CURVE('',#456748,#456756,#456758,.T.); +#456756 = VERTEX_POINT('',#456757); +#456757 = CARTESIAN_POINT('',(151.85569,-146.558291,-7.5E-02)); +#456758 = CIRCLE('',#456759,0.484201554455); +#456759 = AXIS2_PLACEMENT_3D('',#456760,#456761,#456762); +#456760 = CARTESIAN_POINT('',(152.12972870064,-146.159099397,-7.5E-02)); +#456761 = DIRECTION('',(-0.,0.,-1.)); +#456762 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#456763 = ORIENTED_EDGE('',*,*,#456764,.T.); +#456764 = EDGE_CURVE('',#456756,#456696,#456765,.T.); +#456765 = LINE('',#456766,#456767); +#456766 = CARTESIAN_POINT('',(151.85569,-146.558291,-7.5E-02)); +#456767 = VECTOR('',#456768,1.); +#456768 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#456769 = FACE_BOUND('',#456770,.T.); +#456770 = EDGE_LOOP('',(#456771,#456782,#456790,#456799,#456807,#456815, + #456824,#456832,#456840)); +#456771 = ORIENTED_EDGE('',*,*,#456772,.T.); +#456772 = EDGE_CURVE('',#456773,#456775,#456777,.T.); +#456773 = VERTEX_POINT('',#456774); +#456774 = CARTESIAN_POINT('',(152.337617,-146.135457,-7.5E-02)); +#456775 = VERTEX_POINT('',#456776); +#456776 = CARTESIAN_POINT('',(151.920664,-146.135457,-7.5E-02)); +#456777 = CIRCLE('',#456778,0.382072162856); +#456778 = AXIS2_PLACEMENT_3D('',#456779,#456780,#456781); +#456779 = CARTESIAN_POINT('',(152.1291405,-146.4556392708,-7.5E-02)); +#456780 = DIRECTION('',(0.,0.,1.)); +#456781 = DIRECTION('',(0.545646922932,0.838015176172,-0.)); +#456782 = ORIENTED_EDGE('',*,*,#456783,.T.); +#456783 = EDGE_CURVE('',#456775,#456784,#456786,.T.); +#456784 = VERTEX_POINT('',#456785); +#456785 = CARTESIAN_POINT('',(151.884519,-146.171601,-7.5E-02)); +#456786 = LINE('',#456787,#456788); +#456787 = CARTESIAN_POINT('',(151.920664,-146.135457,-7.5E-02)); +#456788 = VECTOR('',#456789,1.); +#456789 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#456790 = ORIENTED_EDGE('',*,*,#456791,.T.); +#456791 = EDGE_CURVE('',#456784,#456792,#456794,.T.); +#456792 = VERTEX_POINT('',#456793); +#456793 = CARTESIAN_POINT('',(151.920664,-146.481843,-7.5E-02)); +#456794 = CIRCLE('',#456795,0.222710800783); +#456795 = AXIS2_PLACEMENT_3D('',#456796,#456797,#456798); +#456796 = CARTESIAN_POINT('',(152.06030434013,-146.3083475355,-7.5E-02) + ); +#456797 = DIRECTION('',(0.,0.,1.)); +#456798 = DIRECTION('',(-0.789298675759,0.614009446543,0.)); +#456799 = ORIENTED_EDGE('',*,*,#456800,.T.); +#456800 = EDGE_CURVE('',#456792,#456801,#456803,.T.); +#456801 = VERTEX_POINT('',#456802); +#456802 = CARTESIAN_POINT('',(151.998088,-146.520555,-7.5E-02)); +#456803 = LINE('',#456804,#456805); +#456804 = CARTESIAN_POINT('',(151.920664,-146.481843,-7.5E-02)); +#456805 = VECTOR('',#456806,1.); +#456806 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#456807 = ORIENTED_EDGE('',*,*,#456808,.T.); +#456808 = EDGE_CURVE('',#456801,#456809,#456811,.T.); +#456809 = VERTEX_POINT('',#456810); +#456810 = CARTESIAN_POINT('',(152.260195,-146.520555,-7.5E-02)); +#456811 = LINE('',#456812,#456813); +#456812 = CARTESIAN_POINT('',(151.998088,-146.520555,-7.5E-02)); +#456813 = VECTOR('',#456814,1.); +#456814 = DIRECTION('',(1.,0.,0.)); +#456815 = ORIENTED_EDGE('',*,*,#456816,.T.); +#456816 = EDGE_CURVE('',#456809,#456817,#456819,.T.); +#456817 = VERTEX_POINT('',#456818); +#456818 = CARTESIAN_POINT('',(152.412475,-146.368275,-7.5E-02)); +#456819 = CIRCLE('',#456820,0.215072998571); +#456820 = AXIS2_PLACEMENT_3D('',#456821,#456822,#456823); +#456821 = CARTESIAN_POINT('',(152.20468813236,-146.3127681323,-7.5E-02) + ); +#456822 = DIRECTION('',(0.,0.,1.)); +#456823 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#456824 = ORIENTED_EDGE('',*,*,#456825,.T.); +#456825 = EDGE_CURVE('',#456817,#456826,#456828,.T.); +#456826 = VERTEX_POINT('',#456827); +#456827 = CARTESIAN_POINT('',(152.412475,-146.249025,-7.5E-02)); +#456828 = LINE('',#456829,#456830); +#456829 = CARTESIAN_POINT('',(152.412475,-146.368275,-7.5E-02)); +#456830 = VECTOR('',#456831,1.); +#456831 = DIRECTION('',(0.,1.,0.)); +#456832 = ORIENTED_EDGE('',*,*,#456833,.T.); +#456833 = EDGE_CURVE('',#456826,#456834,#456836,.T.); +#456834 = VERTEX_POINT('',#456835); +#456835 = CARTESIAN_POINT('',(152.373764,-146.171603,-7.5E-02)); +#456836 = LINE('',#456837,#456838); +#456837 = CARTESIAN_POINT('',(152.412475,-146.249025,-7.5E-02)); +#456838 = VECTOR('',#456839,1.); +#456839 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#456840 = ORIENTED_EDGE('',*,*,#456841,.T.); +#456841 = EDGE_CURVE('',#456834,#456773,#456842,.T.); +#456842 = LINE('',#456843,#456844); +#456843 = CARTESIAN_POINT('',(152.373764,-146.171603,-7.5E-02)); +#456844 = VECTOR('',#456845,1.); +#456845 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#456846 = PLANE('',#456847); +#456847 = AXIS2_PLACEMENT_3D('',#456848,#456849,#456850); +#456848 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#456849 = DIRECTION('',(-0.,-0.,-1.)); +#456850 = DIRECTION('',(-1.,0.,0.)); +#456851 = SHELL_BASED_SURFACE_MODEL('',(#456852)); +#456852 = OPEN_SHELL('',(#456853)); +#456853 = ADVANCED_FACE('',(#456854),#457020,.T.); +#456854 = FACE_BOUND('',#456855,.T.); +#456855 = EDGE_LOOP('',(#456856,#456867,#456875,#456883,#456891,#456899, + #456907,#456915,#456924,#456932,#456940,#456948,#456956,#456964, + #456973,#456981,#456989,#456998,#457006,#457014)); +#456856 = ORIENTED_EDGE('',*,*,#456857,.T.); +#456857 = EDGE_CURVE('',#456858,#456860,#456862,.T.); +#456858 = VERTEX_POINT('',#456859); +#456859 = CARTESIAN_POINT('',(153.359558,-145.646656,-7.5E-02)); +#456860 = VERTEX_POINT('',#456861); +#456861 = CARTESIAN_POINT('',(153.455752,-145.66579,-7.5E-02)); +#456862 = CIRCLE('',#456863,4.999998452108E-02); +#456863 = AXIS2_PLACEMENT_3D('',#456864,#456865,#456866); +#456864 = CARTESIAN_POINT('',(153.40575201547,-145.6657900373,-7.5E-02) + ); +#456865 = DIRECTION('',(0.,0.,-1.)); +#456866 = DIRECTION('',(-0.923880595592,0.382680865851,0.)); +#456867 = ORIENTED_EDGE('',*,*,#456868,.T.); +#456868 = EDGE_CURVE('',#456860,#456869,#456871,.T.); +#456869 = VERTEX_POINT('',#456870); +#456870 = CARTESIAN_POINT('',(153.455752,-145.758647,-7.5E-02)); +#456871 = LINE('',#456872,#456873); +#456872 = CARTESIAN_POINT('',(153.455752,-145.66579,-7.5E-02)); +#456873 = VECTOR('',#456874,1.); +#456874 = DIRECTION('',(0.,-1.,0.)); +#456875 = ORIENTED_EDGE('',*,*,#456876,.T.); +#456876 = EDGE_CURVE('',#456869,#456877,#456879,.T.); +#456877 = VERTEX_POINT('',#456878); +#456878 = CARTESIAN_POINT('',(153.940829,-145.760888,-7.5E-02)); +#456879 = LINE('',#456880,#456881); +#456880 = CARTESIAN_POINT('',(153.455752,-145.758647,-7.5E-02)); +#456881 = VECTOR('',#456882,1.); +#456882 = DIRECTION('',(0.999989328502,-4.619835789308E-03,0.)); +#456883 = ORIENTED_EDGE('',*,*,#456884,.T.); +#456884 = EDGE_CURVE('',#456877,#456885,#456887,.T.); +#456885 = VERTEX_POINT('',#456886); +#456886 = CARTESIAN_POINT('',(154.05756,-145.818493,-7.5E-02)); +#456887 = LINE('',#456888,#456889); +#456888 = CARTESIAN_POINT('',(153.940829,-145.760888,-7.5E-02)); +#456889 = VECTOR('',#456890,1.); +#456890 = DIRECTION('',(0.896751907126,-0.442533633825,0.)); +#456891 = ORIENTED_EDGE('',*,*,#456892,.T.); +#456892 = EDGE_CURVE('',#456885,#456893,#456895,.T.); +#456893 = VERTEX_POINT('',#456894); +#456894 = CARTESIAN_POINT('',(154.069521,-145.833905,-7.5E-02)); +#456895 = LINE('',#456896,#456897); +#456896 = CARTESIAN_POINT('',(154.05756,-145.818493,-7.5E-02)); +#456897 = VECTOR('',#456898,1.); +#456898 = DIRECTION('',(0.61310632988,-0.790000397634,0.)); +#456899 = ORIENTED_EDGE('',*,*,#456900,.T.); +#456900 = EDGE_CURVE('',#456893,#456901,#456903,.T.); +#456901 = VERTEX_POINT('',#456902); +#456902 = CARTESIAN_POINT('',(154.120176,-145.940231,-7.5E-02)); +#456903 = LINE('',#456904,#456905); +#456904 = CARTESIAN_POINT('',(154.069521,-145.833905,-7.5E-02)); +#456905 = VECTOR('',#456906,1.); +#456906 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#456907 = ORIENTED_EDGE('',*,*,#456908,.T.); +#456908 = EDGE_CURVE('',#456901,#456909,#456911,.T.); +#456909 = VERTEX_POINT('',#456910); +#456910 = CARTESIAN_POINT('',(154.122419,-146.046742,-7.5E-02)); +#456911 = LINE('',#456912,#456913); +#456912 = CARTESIAN_POINT('',(154.120176,-145.940231,-7.5E-02)); +#456913 = VECTOR('',#456914,1.); +#456914 = DIRECTION('',(2.105418977967E-02,-0.999778335979,0.)); +#456915 = ORIENTED_EDGE('',*,*,#456916,.T.); +#456916 = EDGE_CURVE('',#456909,#456917,#456919,.T.); +#456917 = VERTEX_POINT('',#456918); +#456918 = CARTESIAN_POINT('',(154.022419,-146.046742,-7.5E-02)); +#456919 = CIRCLE('',#456920,5.000000000002E-02); +#456920 = AXIS2_PLACEMENT_3D('',#456921,#456922,#456923); +#456921 = CARTESIAN_POINT('',(154.072419,-146.0467419522,-7.5E-02)); +#456922 = DIRECTION('',(-0.,0.,-1.)); +#456923 = DIRECTION('',(1.,-9.542361567576E-07,-0.)); +#456924 = ORIENTED_EDGE('',*,*,#456925,.T.); +#456925 = EDGE_CURVE('',#456917,#456926,#456928,.T.); +#456926 = VERTEX_POINT('',#456927); +#456927 = CARTESIAN_POINT('',(154.022419,-145.963307,-7.5E-02)); +#456928 = LINE('',#456929,#456930); +#456929 = CARTESIAN_POINT('',(154.022419,-146.046742,-7.5E-02)); +#456930 = VECTOR('',#456931,1.); +#456931 = DIRECTION('',(0.,1.,0.)); +#456932 = ORIENTED_EDGE('',*,*,#456933,.T.); +#456933 = EDGE_CURVE('',#456926,#456934,#456936,.T.); +#456934 = VERTEX_POINT('',#456935); +#456935 = CARTESIAN_POINT('',(153.987532,-145.893533,-7.5E-02)); +#456936 = LINE('',#456937,#456938); +#456937 = CARTESIAN_POINT('',(154.022419,-145.963307,-7.5E-02)); +#456938 = VECTOR('',#456939,1.); +#456939 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#456940 = ORIENTED_EDGE('',*,*,#456941,.T.); +#456941 = EDGE_CURVE('',#456934,#456942,#456944,.T.); +#456942 = VERTEX_POINT('',#456943); +#456943 = CARTESIAN_POINT('',(153.917759,-145.858647,-7.5E-02)); +#456944 = LINE('',#456945,#456946); +#456945 = CARTESIAN_POINT('',(153.987532,-145.893533,-7.5E-02)); +#456946 = VECTOR('',#456947,1.); +#456947 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#456948 = ORIENTED_EDGE('',*,*,#456949,.T.); +#456949 = EDGE_CURVE('',#456942,#456950,#456952,.T.); +#456950 = VERTEX_POINT('',#456951); +#456951 = CARTESIAN_POINT('',(153.455752,-145.858647,-7.5E-02)); +#456952 = LINE('',#456953,#456954); +#456953 = CARTESIAN_POINT('',(153.917759,-145.858647,-7.5E-02)); +#456954 = VECTOR('',#456955,1.); +#456955 = DIRECTION('',(-1.,0.,0.)); +#456956 = ORIENTED_EDGE('',*,*,#456957,.T.); +#456957 = EDGE_CURVE('',#456950,#456958,#456960,.T.); +#456958 = VERTEX_POINT('',#456959); +#456959 = CARTESIAN_POINT('',(153.455752,-146.046742,-7.5E-02)); +#456960 = LINE('',#456961,#456962); +#456961 = CARTESIAN_POINT('',(153.455752,-145.858647,-7.5E-02)); +#456962 = VECTOR('',#456963,1.); +#456963 = DIRECTION('',(0.,-1.,0.)); +#456964 = ORIENTED_EDGE('',*,*,#456965,.T.); +#456965 = EDGE_CURVE('',#456958,#456966,#456968,.T.); +#456966 = VERTEX_POINT('',#456967); +#456967 = CARTESIAN_POINT('',(153.355752,-146.046742,-7.5E-02)); +#456968 = CIRCLE('',#456969,5.000000000002E-02); +#456969 = AXIS2_PLACEMENT_3D('',#456970,#456971,#456972); +#456970 = CARTESIAN_POINT('',(153.405752,-146.0467419522,-7.5E-02)); +#456971 = DIRECTION('',(-0.,0.,-1.)); +#456972 = DIRECTION('',(1.,-9.542361567576E-07,-0.)); +#456973 = ORIENTED_EDGE('',*,*,#456974,.T.); +#456974 = EDGE_CURVE('',#456966,#456975,#456977,.T.); +#456975 = VERTEX_POINT('',#456976); +#456976 = CARTESIAN_POINT('',(153.355752,-145.858647,-7.5E-02)); +#456977 = LINE('',#456978,#456979); +#456978 = CARTESIAN_POINT('',(153.355752,-146.046742,-7.5E-02)); +#456979 = VECTOR('',#456980,1.); +#456980 = DIRECTION('',(0.,1.,0.)); +#456981 = ORIENTED_EDGE('',*,*,#456982,.T.); +#456982 = EDGE_CURVE('',#456975,#456983,#456985,.T.); +#456983 = VERTEX_POINT('',#456984); +#456984 = CARTESIAN_POINT('',(153.072419,-145.858647,-7.5E-02)); +#456985 = LINE('',#456986,#456987); +#456986 = CARTESIAN_POINT('',(153.355752,-145.858647,-7.5E-02)); +#456987 = VECTOR('',#456988,1.); +#456988 = DIRECTION('',(-1.,0.,0.)); +#456989 = ORIENTED_EDGE('',*,*,#456990,.T.); +#456990 = EDGE_CURVE('',#456983,#456991,#456993,.T.); +#456991 = VERTEX_POINT('',#456992); +#456992 = CARTESIAN_POINT('',(153.072419,-145.758647,-7.5E-02)); +#456993 = CIRCLE('',#456994,5.000000000003E-02); +#456994 = AXIS2_PLACEMENT_3D('',#456995,#456996,#456997); +#456995 = CARTESIAN_POINT('',(153.07241904771,-145.808647,-7.5E-02)); +#456996 = DIRECTION('',(0.,0.,-1.)); +#456997 = DIRECTION('',(-9.54237293626E-07,-1.,-0.)); +#456998 = ORIENTED_EDGE('',*,*,#456999,.T.); +#456999 = EDGE_CURVE('',#456991,#457000,#457002,.T.); +#457000 = VERTEX_POINT('',#457001); +#457001 = CARTESIAN_POINT('',(153.355752,-145.758647,-7.5E-02)); +#457002 = LINE('',#457003,#457004); +#457003 = CARTESIAN_POINT('',(153.072419,-145.758647,-7.5E-02)); +#457004 = VECTOR('',#457005,1.); +#457005 = DIRECTION('',(1.,0.,0.)); +#457006 = ORIENTED_EDGE('',*,*,#457007,.T.); +#457007 = EDGE_CURVE('',#457000,#457008,#457010,.T.); +#457008 = VERTEX_POINT('',#457009); +#457009 = CARTESIAN_POINT('',(153.355752,-145.66579,-7.5E-02)); +#457010 = LINE('',#457011,#457012); +#457011 = CARTESIAN_POINT('',(153.355752,-145.758647,-7.5E-02)); +#457012 = VECTOR('',#457013,1.); +#457013 = DIRECTION('',(0.,1.,0.)); +#457014 = ORIENTED_EDGE('',*,*,#457015,.T.); +#457015 = EDGE_CURVE('',#457008,#456858,#457016,.T.); +#457016 = LINE('',#457017,#457018); +#457017 = CARTESIAN_POINT('',(153.355752,-145.66579,-7.5E-02)); +#457018 = VECTOR('',#457019,1.); +#457019 = DIRECTION('',(0.195090852695,0.980785174845,0.)); +#457020 = PLANE('',#457021); +#457021 = AXIS2_PLACEMENT_3D('',#457022,#457023,#457024); +#457022 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457023 = DIRECTION('',(-0.,-0.,-1.)); +#457024 = DIRECTION('',(-1.,0.,0.)); +#457025 = SHELL_BASED_SURFACE_MODEL('',(#457026)); +#457026 = OPEN_SHELL('',(#457027)); +#457027 = ADVANCED_FACE('',(#457028),#457155,.T.); +#457028 = FACE_BOUND('',#457029,.T.); +#457029 = EDGE_LOOP('',(#457030,#457041,#457049,#457058,#457066,#457074, + #457083,#457091,#457100,#457108,#457116,#457125,#457133,#457141, + #457149)); +#457030 = ORIENTED_EDGE('',*,*,#457031,.T.); +#457031 = EDGE_CURVE('',#457032,#457034,#457036,.T.); +#457032 = VERTEX_POINT('',#457033); +#457033 = CARTESIAN_POINT('',(151.413105,-144.864184,-7.5E-02)); +#457034 = VERTEX_POINT('',#457035); +#457035 = CARTESIAN_POINT('',(151.474056,-144.80763,-7.5E-02)); +#457036 = CIRCLE('',#457037,4.999899407899E-02); +#457037 = AXIS2_PLACEMENT_3D('',#457038,#457039,#457040); +#457038 = CARTESIAN_POINT('',(151.46247352334,-144.8562689313,-7.5E-02) + ); +#457039 = DIRECTION('',(0.,0.,-1.)); +#457040 = DIRECTION('',(-0.987390331635,-0.158304557719,-0.)); +#457041 = ORIENTED_EDGE('',*,*,#457042,.T.); +#457042 = EDGE_CURVE('',#457034,#457043,#457045,.T.); +#457043 = VERTEX_POINT('',#457044); +#457044 = CARTESIAN_POINT('',(152.474056,-145.045725,-7.5E-02)); +#457045 = LINE('',#457046,#457047); +#457046 = CARTESIAN_POINT('',(151.474056,-144.80763,-7.5E-02)); +#457047 = VECTOR('',#457048,1.); +#457048 = DIRECTION('',(0.972806266875,-0.231620308112,0.)); +#457049 = ORIENTED_EDGE('',*,*,#457050,.T.); +#457050 = EDGE_CURVE('',#457043,#457051,#457053,.T.); +#457051 = VERTEX_POINT('',#457052); +#457052 = CARTESIAN_POINT('',(152.475358,-145.142677,-7.5E-02)); +#457053 = CIRCLE('',#457054,4.999982916868E-02); +#457054 = AXIS2_PLACEMENT_3D('',#457055,#457056,#457057); +#457055 = CARTESIAN_POINT('',(152.46247550138,-145.0943652607,-7.5E-02) + ); +#457056 = DIRECTION('',(0.,0.,-1.)); +#457057 = DIRECTION('',(0.231610763566,0.972808539333,0.)); +#457058 = ORIENTED_EDGE('',*,*,#457059,.T.); +#457059 = EDGE_CURVE('',#457051,#457060,#457062,.T.); +#457060 = VERTEX_POINT('',#457061); +#457061 = CARTESIAN_POINT('',(151.942242,-145.284841,-7.5E-02)); +#457062 = LINE('',#457063,#457064); +#457063 = CARTESIAN_POINT('',(152.475358,-145.142677,-7.5E-02)); +#457064 = VECTOR('',#457065,1.); +#457065 = DIRECTION('',(-0.966235059928,-0.257662199333,0.)); +#457066 = ORIENTED_EDGE('',*,*,#457067,.T.); +#457067 = EDGE_CURVE('',#457060,#457068,#457070,.T.); +#457068 = VERTEX_POINT('',#457069); +#457069 = CARTESIAN_POINT('',(152.475358,-145.427005,-7.5E-02)); +#457070 = LINE('',#457071,#457072); +#457071 = CARTESIAN_POINT('',(151.942242,-145.284841,-7.5E-02)); +#457072 = VECTOR('',#457073,1.); +#457073 = DIRECTION('',(0.966235059928,-0.257662199333,0.)); +#457074 = ORIENTED_EDGE('',*,*,#457075,.T.); +#457075 = EDGE_CURVE('',#457068,#457076,#457078,.T.); +#457076 = VERTEX_POINT('',#457077); +#457077 = CARTESIAN_POINT('',(152.474056,-145.523957,-7.5E-02)); +#457078 = CIRCLE('',#457079,4.999977859363E-02); +#457079 = AXIS2_PLACEMENT_3D('',#457080,#457081,#457082); +#457080 = CARTESIAN_POINT('',(152.46247570809,-145.4753167419,-7.5E-02) + ); +#457081 = DIRECTION('',(0.,0.,-1.)); +#457082 = DIRECTION('',(0.257646979038,0.966239118538,0.)); +#457083 = ORIENTED_EDGE('',*,*,#457084,.T.); +#457084 = EDGE_CURVE('',#457076,#457085,#457087,.T.); +#457085 = VERTEX_POINT('',#457086); +#457086 = CARTESIAN_POINT('',(151.474056,-145.762053,-7.5E-02)); +#457087 = LINE('',#457088,#457089); +#457088 = CARTESIAN_POINT('',(152.474056,-145.523957,-7.5E-02)); +#457089 = VECTOR('',#457090,1.); +#457090 = DIRECTION('',(-0.97280604768,-0.231621228728,0.)); +#457091 = ORIENTED_EDGE('',*,*,#457092,.T.); +#457092 = EDGE_CURVE('',#457085,#457093,#457095,.T.); +#457093 = VERTEX_POINT('',#457094); +#457094 = CARTESIAN_POINT('',(151.450894,-145.664773,-7.5E-02)); +#457095 = CIRCLE('',#457096,4.999969160947E-02); +#457096 = AXIS2_PLACEMENT_3D('',#457097,#457098,#457099); +#457097 = CARTESIAN_POINT('',(151.46247480158,-145.7134130472,-7.5E-02) + ); +#457098 = DIRECTION('',(0.,0.,-1.)); +#457099 = DIRECTION('',(0.231625397006,-0.97280505522,0.)); +#457100 = ORIENTED_EDGE('',*,*,#457101,.T.); +#457101 = EDGE_CURVE('',#457093,#457102,#457104,.T.); +#457102 = VERTEX_POINT('',#457103); +#457103 = CARTESIAN_POINT('',(152.258131,-145.472572,-7.5E-02)); +#457104 = LINE('',#457105,#457106); +#457105 = CARTESIAN_POINT('',(151.450894,-145.664773,-7.5E-02)); +#457106 = VECTOR('',#457107,1.); +#457107 = DIRECTION('',(0.972805749192,0.231622482369,0.)); +#457108 = ORIENTED_EDGE('',*,*,#457109,.T.); +#457109 = EDGE_CURVE('',#457102,#457110,#457112,.T.); +#457110 = VERTEX_POINT('',#457111); +#457111 = CARTESIAN_POINT('',(151.735306,-145.333153,-7.5E-02)); +#457112 = LINE('',#457113,#457114); +#457113 = CARTESIAN_POINT('',(152.258131,-145.472572,-7.5E-02)); +#457114 = VECTOR('',#457115,1.); +#457115 = DIRECTION('',(-0.966235399709,0.257660925151,0.)); +#457116 = ORIENTED_EDGE('',*,*,#457117,.T.); +#457117 = EDGE_CURVE('',#457110,#457118,#457120,.T.); +#457118 = VERTEX_POINT('',#457119); +#457119 = CARTESIAN_POINT('',(151.735306,-145.236529,-7.5E-02)); +#457120 = CIRCLE('',#457121,5.000045166514E-02); +#457121 = AXIS2_PLACEMENT_3D('',#457122,#457123,#457124); +#457122 = CARTESIAN_POINT('',(151.74818993661,-145.284841,-7.5E-02)); +#457123 = DIRECTION('',(0.,0.,-1.)); +#457124 = DIRECTION('',(-0.257676404645,-0.966231271741,-0.)); +#457125 = ORIENTED_EDGE('',*,*,#457126,.T.); +#457126 = EDGE_CURVE('',#457118,#457127,#457129,.T.); +#457127 = VERTEX_POINT('',#457128); +#457128 = CARTESIAN_POINT('',(152.258131,-145.097109,-7.5E-02)); +#457129 = LINE('',#457130,#457131); +#457130 = CARTESIAN_POINT('',(151.735306,-145.236529,-7.5E-02)); +#457131 = VECTOR('',#457132,1.); +#457132 = DIRECTION('',(0.966234939601,0.25766265056,0.)); +#457133 = ORIENTED_EDGE('',*,*,#457134,.T.); +#457134 = EDGE_CURVE('',#457127,#457135,#457137,.T.); +#457135 = VERTEX_POINT('',#457136); +#457136 = CARTESIAN_POINT('',(151.450894,-144.90491,-7.5E-02)); +#457137 = LINE('',#457138,#457139); +#457138 = CARTESIAN_POINT('',(152.258131,-145.097109,-7.5E-02)); +#457139 = VECTOR('',#457140,1.); +#457140 = DIRECTION('',(-0.972806292267,0.231620201462,0.)); +#457141 = ORIENTED_EDGE('',*,*,#457142,.T.); +#457142 = EDGE_CURVE('',#457135,#457143,#457145,.T.); +#457143 = VERTEX_POINT('',#457144); +#457144 = CARTESIAN_POINT('',(151.433162,-144.896776,-7.5E-02)); +#457145 = LINE('',#457146,#457147); +#457146 = CARTESIAN_POINT('',(151.450894,-144.90491,-7.5E-02)); +#457147 = VECTOR('',#457148,1.); +#457148 = DIRECTION('',(-0.908932105358,0.416944154353,0.)); +#457149 = ORIENTED_EDGE('',*,*,#457150,.T.); +#457150 = EDGE_CURVE('',#457143,#457032,#457151,.T.); +#457151 = LINE('',#457152,#457153); +#457152 = CARTESIAN_POINT('',(151.433162,-144.896776,-7.5E-02)); +#457153 = VECTOR('',#457154,1.); +#457154 = DIRECTION('',(-0.524104715343,0.851653830705,0.)); +#457155 = PLANE('',#457156); +#457156 = AXIS2_PLACEMENT_3D('',#457157,#457158,#457159); +#457157 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457158 = DIRECTION('',(-0.,-0.,-1.)); +#457159 = DIRECTION('',(-1.,0.,0.)); +#457160 = SHELL_BASED_SURFACE_MODEL('',(#457161)); +#457161 = OPEN_SHELL('',(#457162)); +#457162 = ADVANCED_FACE('',(#457163),#457312,.T.); +#457163 = FACE_BOUND('',#457164,.T.); +#457164 = EDGE_LOOP('',(#457165,#457176,#457184,#457193,#457201,#457209, + #457217,#457225,#457233,#457241,#457249,#457258,#457266,#457274, + #457282,#457290,#457298,#457306)); +#457165 = ORIENTED_EDGE('',*,*,#457166,.T.); +#457166 = EDGE_CURVE('',#457167,#457169,#457171,.T.); +#457167 = VERTEX_POINT('',#457168); +#457168 = CARTESIAN_POINT('',(153.386618,-144.950079,-7.5E-02)); +#457169 = VERTEX_POINT('',#457170); +#457170 = CARTESIAN_POINT('',(153.405752,-144.853885,-7.5E-02)); +#457171 = CIRCLE('',#457172,4.999998452108E-02); +#457172 = AXIS2_PLACEMENT_3D('',#457173,#457174,#457175); +#457173 = CARTESIAN_POINT('',(153.40575203736,-144.9038849845,-7.5E-02) + ); +#457174 = DIRECTION('',(0.,0.,-1.)); +#457175 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#457176 = ORIENTED_EDGE('',*,*,#457177,.T.); +#457177 = EDGE_CURVE('',#457169,#457178,#457180,.T.); +#457178 = VERTEX_POINT('',#457179); +#457179 = CARTESIAN_POINT('',(154.072419,-144.853885,-7.5E-02)); +#457180 = LINE('',#457181,#457182); +#457181 = CARTESIAN_POINT('',(153.405752,-144.853885,-7.5E-02)); +#457182 = VECTOR('',#457183,1.); +#457183 = DIRECTION('',(1.,0.,0.)); +#457184 = ORIENTED_EDGE('',*,*,#457185,.T.); +#457185 = EDGE_CURVE('',#457178,#457186,#457188,.T.); +#457186 = VERTEX_POINT('',#457187); +#457187 = CARTESIAN_POINT('',(154.072419,-144.953885,-7.5E-02)); +#457188 = CIRCLE('',#457189,5.000000000003E-02); +#457189 = AXIS2_PLACEMENT_3D('',#457190,#457191,#457192); +#457190 = CARTESIAN_POINT('',(154.07241895228,-144.903885,-7.5E-02)); +#457191 = DIRECTION('',(0.,0.,-1.)); +#457192 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#457193 = ORIENTED_EDGE('',*,*,#457194,.T.); +#457194 = EDGE_CURVE('',#457186,#457195,#457197,.T.); +#457195 = VERTEX_POINT('',#457196); +#457196 = CARTESIAN_POINT('',(153.521701,-144.953885,-7.5E-02)); +#457197 = LINE('',#457198,#457199); +#457198 = CARTESIAN_POINT('',(154.072419,-144.953885,-7.5E-02)); +#457199 = VECTOR('',#457200,1.); +#457200 = DIRECTION('',(-1.,0.,0.)); +#457201 = ORIENTED_EDGE('',*,*,#457202,.T.); +#457202 = EDGE_CURVE('',#457195,#457203,#457205,.T.); +#457203 = VERTEX_POINT('',#457204); +#457204 = CARTESIAN_POINT('',(153.494463,-144.981121,-7.5E-02)); +#457205 = LINE('',#457206,#457207); +#457206 = CARTESIAN_POINT('',(153.521701,-144.953885,-7.5E-02)); +#457207 = VECTOR('',#457208,1.); +#457208 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#457209 = ORIENTED_EDGE('',*,*,#457210,.T.); +#457210 = EDGE_CURVE('',#457203,#457211,#457213,.T.); +#457211 = VERTEX_POINT('',#457212); +#457212 = CARTESIAN_POINT('',(153.455752,-145.058545,-7.5E-02)); +#457213 = LINE('',#457214,#457215); +#457214 = CARTESIAN_POINT('',(153.494463,-144.981121,-7.5E-02)); +#457215 = VECTOR('',#457216,1.); +#457216 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#457217 = ORIENTED_EDGE('',*,*,#457218,.T.); +#457218 = EDGE_CURVE('',#457211,#457219,#457221,.T.); +#457219 = VERTEX_POINT('',#457220); +#457220 = CARTESIAN_POINT('',(153.455752,-145.177796,-7.5E-02)); +#457221 = LINE('',#457222,#457223); +#457222 = CARTESIAN_POINT('',(153.455752,-145.058545,-7.5E-02)); +#457223 = VECTOR('',#457224,1.); +#457224 = DIRECTION('',(0.,-1.,0.)); +#457225 = ORIENTED_EDGE('',*,*,#457226,.T.); +#457226 = EDGE_CURVE('',#457219,#457227,#457229,.T.); +#457227 = VERTEX_POINT('',#457228); +#457228 = CARTESIAN_POINT('',(153.490638,-145.247569,-7.5E-02)); +#457229 = LINE('',#457230,#457231); +#457230 = CARTESIAN_POINT('',(153.455752,-145.177796,-7.5E-02)); +#457231 = VECTOR('',#457232,1.); +#457232 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#457233 = ORIENTED_EDGE('',*,*,#457234,.T.); +#457234 = EDGE_CURVE('',#457227,#457235,#457237,.T.); +#457235 = VERTEX_POINT('',#457236); +#457236 = CARTESIAN_POINT('',(153.560413,-145.282456,-7.5E-02)); +#457237 = LINE('',#457238,#457239); +#457238 = CARTESIAN_POINT('',(153.490638,-145.247569,-7.5E-02)); +#457239 = VECTOR('',#457240,1.); +#457240 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#457241 = ORIENTED_EDGE('',*,*,#457242,.T.); +#457242 = EDGE_CURVE('',#457235,#457243,#457245,.T.); +#457243 = VERTEX_POINT('',#457244); +#457244 = CARTESIAN_POINT('',(154.072419,-145.282456,-7.5E-02)); +#457245 = LINE('',#457246,#457247); +#457246 = CARTESIAN_POINT('',(153.560413,-145.282456,-7.5E-02)); +#457247 = VECTOR('',#457248,1.); +#457248 = DIRECTION('',(1.,0.,0.)); +#457249 = ORIENTED_EDGE('',*,*,#457250,.T.); +#457250 = EDGE_CURVE('',#457243,#457251,#457253,.T.); +#457251 = VERTEX_POINT('',#457252); +#457252 = CARTESIAN_POINT('',(154.072419,-145.382456,-7.5E-02)); +#457253 = CIRCLE('',#457254,5.000000000002E-02); +#457254 = AXIS2_PLACEMENT_3D('',#457255,#457256,#457257); +#457255 = CARTESIAN_POINT('',(154.07241895228,-145.332456,-7.5E-02)); +#457256 = DIRECTION('',(0.,0.,-1.)); +#457257 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#457258 = ORIENTED_EDGE('',*,*,#457259,.T.); +#457259 = EDGE_CURVE('',#457251,#457260,#457262,.T.); +#457260 = VERTEX_POINT('',#457261); +#457261 = CARTESIAN_POINT('',(153.537336,-145.380213,-7.5E-02)); +#457262 = LINE('',#457263,#457264); +#457263 = CARTESIAN_POINT('',(154.072419,-145.382456,-7.5E-02)); +#457264 = VECTOR('',#457265,1.); +#457265 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#457266 = ORIENTED_EDGE('',*,*,#457267,.T.); +#457267 = EDGE_CURVE('',#457260,#457268,#457270,.T.); +#457268 = VERTEX_POINT('',#457269); +#457269 = CARTESIAN_POINT('',(153.420611,-145.322609,-7.5E-02)); +#457270 = LINE('',#457271,#457272); +#457271 = CARTESIAN_POINT('',(153.537336,-145.380213,-7.5E-02)); +#457272 = VECTOR('',#457273,1.); +#457273 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#457274 = ORIENTED_EDGE('',*,*,#457275,.T.); +#457275 = EDGE_CURVE('',#457268,#457276,#457278,.T.); +#457276 = VERTEX_POINT('',#457277); +#457277 = CARTESIAN_POINT('',(153.408649,-145.307197,-7.5E-02)); +#457278 = LINE('',#457279,#457280); +#457279 = CARTESIAN_POINT('',(153.420611,-145.322609,-7.5E-02)); +#457280 = VECTOR('',#457281,1.); +#457281 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#457282 = ORIENTED_EDGE('',*,*,#457283,.T.); +#457283 = EDGE_CURVE('',#457276,#457284,#457286,.T.); +#457284 = VERTEX_POINT('',#457285); +#457285 = CARTESIAN_POINT('',(153.357994,-145.200871,-7.5E-02)); +#457286 = LINE('',#457287,#457288); +#457287 = CARTESIAN_POINT('',(153.408649,-145.307197,-7.5E-02)); +#457288 = VECTOR('',#457289,1.); +#457289 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#457290 = ORIENTED_EDGE('',*,*,#457291,.T.); +#457291 = EDGE_CURVE('',#457284,#457292,#457294,.T.); +#457292 = VERTEX_POINT('',#457293); +#457293 = CARTESIAN_POINT('',(153.357994,-145.035469,-7.5E-02)); +#457294 = LINE('',#457295,#457296); +#457295 = CARTESIAN_POINT('',(153.357994,-145.200871,-7.5E-02)); +#457296 = VECTOR('',#457297,1.); +#457297 = DIRECTION('',(0.,1.,0.)); +#457298 = ORIENTED_EDGE('',*,*,#457299,.T.); +#457299 = EDGE_CURVE('',#457292,#457300,#457302,.T.); +#457300 = VERTEX_POINT('',#457301); +#457301 = CARTESIAN_POINT('',(153.397135,-144.952171,-7.5E-02)); +#457302 = LINE('',#457303,#457304); +#457303 = CARTESIAN_POINT('',(153.357994,-145.035469,-7.5E-02)); +#457304 = VECTOR('',#457305,1.); +#457305 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#457306 = ORIENTED_EDGE('',*,*,#457307,.T.); +#457307 = EDGE_CURVE('',#457300,#457167,#457308,.T.); +#457308 = LINE('',#457309,#457310); +#457309 = CARTESIAN_POINT('',(153.397135,-144.952171,-7.5E-02)); +#457310 = VECTOR('',#457311,1.); +#457311 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#457312 = PLANE('',#457313); +#457313 = AXIS2_PLACEMENT_3D('',#457314,#457315,#457316); +#457314 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457315 = DIRECTION('',(-0.,-0.,-1.)); +#457316 = DIRECTION('',(-1.,0.,0.)); +#457317 = SHELL_BASED_SURFACE_MODEL('',(#457318)); +#457318 = OPEN_SHELL('',(#457319)); +#457319 = ADVANCED_FACE('',(#457320),#457414,.T.); +#457320 = FACE_BOUND('',#457321,.T.); +#457321 = EDGE_LOOP('',(#457322,#457333,#457341,#457350,#457358,#457367, + #457375,#457384,#457392,#457400,#457408)); +#457322 = ORIENTED_EDGE('',*,*,#457323,.T.); +#457323 = EDGE_CURVE('',#457324,#457326,#457328,.T.); +#457324 = VERTEX_POINT('',#457325); +#457325 = CARTESIAN_POINT('',(151.776674,-144.378654,-7.5E-02)); +#457326 = VERTEX_POINT('',#457327); +#457327 = CARTESIAN_POINT('',(151.795808,-144.28246,-7.5E-02)); +#457328 = CIRCLE('',#457329,4.999998452111E-02); +#457329 = AXIS2_PLACEMENT_3D('',#457330,#457331,#457332); +#457330 = CARTESIAN_POINT('',(151.79580803736,-144.3324599845,-7.5E-02) + ); +#457331 = DIRECTION('',(0.,0.,-1.)); +#457332 = DIRECTION('',(-0.382680865852,-0.923880595592,-0.)); +#457333 = ORIENTED_EDGE('',*,*,#457334,.T.); +#457334 = EDGE_CURVE('',#457326,#457335,#457337,.T.); +#457335 = VERTEX_POINT('',#457336); +#457336 = CARTESIAN_POINT('',(152.462475,-144.28246,-7.5E-02)); +#457337 = LINE('',#457338,#457339); +#457338 = CARTESIAN_POINT('',(151.795808,-144.28246,-7.5E-02)); +#457339 = VECTOR('',#457340,1.); +#457340 = DIRECTION('',(1.,0.,0.)); +#457341 = ORIENTED_EDGE('',*,*,#457342,.T.); +#457342 = EDGE_CURVE('',#457335,#457343,#457345,.T.); +#457343 = VERTEX_POINT('',#457344); +#457344 = CARTESIAN_POINT('',(152.462475,-144.38246,-7.5E-02)); +#457345 = CIRCLE('',#457346,5.000000000004E-02); +#457346 = AXIS2_PLACEMENT_3D('',#457347,#457348,#457349); +#457347 = CARTESIAN_POINT('',(152.46247495228,-144.33246,-7.5E-02)); +#457348 = DIRECTION('',(0.,0.,-1.)); +#457349 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#457350 = ORIENTED_EDGE('',*,*,#457351,.T.); +#457351 = EDGE_CURVE('',#457343,#457352,#457354,.T.); +#457352 = VERTEX_POINT('',#457353); +#457353 = CARTESIAN_POINT('',(151.998088,-144.38246,-7.5E-02)); +#457354 = LINE('',#457355,#457356); +#457355 = CARTESIAN_POINT('',(152.462475,-144.38246,-7.5E-02)); +#457356 = VECTOR('',#457357,1.); +#457357 = DIRECTION('',(-1.,0.,0.)); +#457358 = ORIENTED_EDGE('',*,*,#457359,.T.); +#457359 = EDGE_CURVE('',#457352,#457360,#457362,.T.); +#457360 = VERTEX_POINT('',#457361); +#457361 = CARTESIAN_POINT('',(151.845808,-144.534739,-7.5E-02)); +#457362 = CIRCLE('',#457363,0.215060043145); +#457363 = AXIS2_PLACEMENT_3D('',#457364,#457365,#457366); +#457364 = CARTESIAN_POINT('',(152.05358399719,-144.5902363616,-7.5E-02) + ); +#457365 = DIRECTION('',(0.,0.,1.)); +#457366 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#457367 = ORIENTED_EDGE('',*,*,#457368,.T.); +#457368 = EDGE_CURVE('',#457360,#457369,#457371,.T.); +#457369 = VERTEX_POINT('',#457370); +#457370 = CARTESIAN_POINT('',(151.845808,-144.618174,-7.5E-02)); +#457371 = LINE('',#457372,#457373); +#457372 = CARTESIAN_POINT('',(151.845808,-144.534739,-7.5E-02)); +#457373 = VECTOR('',#457374,1.); +#457374 = DIRECTION('',(0.,-1.,0.)); +#457375 = ORIENTED_EDGE('',*,*,#457376,.T.); +#457376 = EDGE_CURVE('',#457369,#457377,#457379,.T.); +#457377 = VERTEX_POINT('',#457378); +#457378 = CARTESIAN_POINT('',(151.745808,-144.618174,-7.5E-02)); +#457379 = CIRCLE('',#457380,5.000000000002E-02); +#457380 = AXIS2_PLACEMENT_3D('',#457381,#457382,#457383); +#457381 = CARTESIAN_POINT('',(151.795808,-144.6181739522,-7.5E-02)); +#457382 = DIRECTION('',(-0.,0.,-1.)); +#457383 = DIRECTION('',(1.,-9.542367251918E-07,-0.)); +#457384 = ORIENTED_EDGE('',*,*,#457385,.T.); +#457385 = EDGE_CURVE('',#457377,#457386,#457388,.T.); +#457386 = VERTEX_POINT('',#457387); +#457387 = CARTESIAN_POINT('',(151.74805,-144.511663,-7.5E-02)); +#457388 = LINE('',#457389,#457390); +#457389 = CARTESIAN_POINT('',(151.745808,-144.618174,-7.5E-02)); +#457390 = VECTOR('',#457391,1.); +#457391 = DIRECTION('',(2.104480731703E-02,0.999778533519,0.)); +#457392 = ORIENTED_EDGE('',*,*,#457393,.T.); +#457393 = EDGE_CURVE('',#457386,#457394,#457396,.T.); +#457394 = VERTEX_POINT('',#457395); +#457395 = CARTESIAN_POINT('',(151.808072,-144.392343,-7.5E-02)); +#457396 = LINE('',#457397,#457398); +#457397 = CARTESIAN_POINT('',(151.74805,-144.511663,-7.5E-02)); +#457398 = VECTOR('',#457399,1.); +#457399 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#457400 = ORIENTED_EDGE('',*,*,#457401,.T.); +#457401 = EDGE_CURVE('',#457394,#457402,#457404,.T.); +#457402 = VERTEX_POINT('',#457403); +#457403 = CARTESIAN_POINT('',(151.817955,-144.38246,-7.5E-02)); +#457404 = LINE('',#457405,#457406); +#457405 = CARTESIAN_POINT('',(151.808072,-144.392343,-7.5E-02)); +#457406 = VECTOR('',#457407,1.); +#457407 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#457408 = ORIENTED_EDGE('',*,*,#457409,.T.); +#457409 = EDGE_CURVE('',#457402,#457324,#457410,.T.); +#457410 = LINE('',#457411,#457412); +#457411 = CARTESIAN_POINT('',(151.817955,-144.38246,-7.5E-02)); +#457412 = VECTOR('',#457413,1.); +#457413 = DIRECTION('',(-0.995776727161,9.180800425308E-02,0.)); +#457414 = PLANE('',#457415); +#457415 = AXIS2_PLACEMENT_3D('',#457416,#457417,#457418); +#457416 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457417 = DIRECTION('',(-0.,-0.,-1.)); +#457418 = DIRECTION('',(-1.,0.,0.)); +#457419 = SHELL_BASED_SURFACE_MODEL('',(#457420)); +#457420 = OPEN_SHELL('',(#457421)); +#457421 = ADVANCED_FACE('',(#457422,#457499),#457576,.T.); +#457422 = FACE_BOUND('',#457423,.T.); +#457423 = EDGE_LOOP('',(#457424,#457435,#457443,#457451,#457459,#457468, + #457476,#457484,#457493)); +#457424 = ORIENTED_EDGE('',*,*,#457425,.T.); +#457425 = EDGE_CURVE('',#457426,#457428,#457430,.T.); +#457426 = VERTEX_POINT('',#457427); +#457427 = CARTESIAN_POINT('',(153.408649,-144.402435,-7.5E-02)); +#457428 = VERTEX_POINT('',#457429); +#457429 = CARTESIAN_POINT('',(153.584955,-143.903746,-7.5E-02)); +#457430 = CIRCLE('',#457431,0.320678184363); +#457431 = AXIS2_PLACEMENT_3D('',#457432,#457433,#457434); +#457432 = CARTESIAN_POINT('',(153.66778910741,-144.2135411074,-7.5E-02) + ); +#457433 = DIRECTION('',(0.,0.,-1.)); +#457434 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#457435 = ORIENTED_EDGE('',*,*,#457436,.T.); +#457436 = EDGE_CURVE('',#457428,#457437,#457439,.T.); +#457437 = VERTEX_POINT('',#457438); +#457438 = CARTESIAN_POINT('',(153.884398,-143.901992,-7.5E-02)); +#457439 = LINE('',#457440,#457441); +#457440 = CARTESIAN_POINT('',(153.584955,-143.903746,-7.5E-02)); +#457441 = VECTOR('',#457442,1.); +#457442 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#457443 = ORIENTED_EDGE('',*,*,#457444,.T.); +#457444 = EDGE_CURVE('',#457437,#457445,#457447,.T.); +#457445 = VERTEX_POINT('',#457446); +#457446 = CARTESIAN_POINT('',(153.904303,-143.906783,-7.5E-02)); +#457447 = LINE('',#457448,#457449); +#457448 = CARTESIAN_POINT('',(153.884398,-143.901992,-7.5E-02)); +#457449 = VECTOR('',#457450,1.); +#457450 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#457451 = ORIENTED_EDGE('',*,*,#457452,.T.); +#457452 = EDGE_CURVE('',#457445,#457453,#457455,.T.); +#457453 = VERTEX_POINT('',#457454); +#457454 = CARTESIAN_POINT('',(154.012535,-143.963767,-7.5E-02)); +#457455 = LINE('',#457456,#457457); +#457456 = CARTESIAN_POINT('',(153.904303,-143.906783,-7.5E-02)); +#457457 = VECTOR('',#457458,1.); +#457458 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#457459 = ORIENTED_EDGE('',*,*,#457460,.T.); +#457460 = EDGE_CURVE('',#457453,#457461,#457463,.T.); +#457461 = VERTEX_POINT('',#457462); +#457462 = CARTESIAN_POINT('',(154.120176,-144.296109,-7.5E-02)); +#457463 = CIRCLE('',#457464,0.323553911777); +#457464 = AXIS2_PLACEMENT_3D('',#457465,#457466,#457467); +#457465 = CARTESIAN_POINT('',(153.80725115022,-144.213858333,-7.5E-02)); +#457466 = DIRECTION('',(0.,0.,-1.)); +#457467 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#457468 = ORIENTED_EDGE('',*,*,#457469,.T.); +#457469 = EDGE_CURVE('',#457461,#457470,#457472,.T.); +#457470 = VERTEX_POINT('',#457471); +#457471 = CARTESIAN_POINT('',(154.060155,-144.415431,-7.5E-02)); +#457472 = LINE('',#457473,#457474); +#457473 = CARTESIAN_POINT('',(154.120176,-144.296109,-7.5E-02)); +#457474 = VECTOR('',#457475,1.); +#457475 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#457476 = ORIENTED_EDGE('',*,*,#457477,.T.); +#457477 = EDGE_CURVE('',#457470,#457478,#457480,.T.); +#457478 = VERTEX_POINT('',#457479); +#457479 = CARTESIAN_POINT('',(153.99954,-144.472416,-7.5E-02)); +#457480 = LINE('',#457481,#457482); +#457481 = CARTESIAN_POINT('',(154.060155,-144.415431,-7.5E-02)); +#457482 = VECTOR('',#457483,1.); +#457483 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#457484 = ORIENTED_EDGE('',*,*,#457485,.T.); +#457485 = EDGE_CURVE('',#457478,#457486,#457488,.T.); +#457486 = VERTEX_POINT('',#457487); +#457487 = CARTESIAN_POINT('',(153.465634,-144.463049,-7.5E-02)); +#457488 = CIRCLE('',#457489,0.484201554455); +#457489 = AXIS2_PLACEMENT_3D('',#457490,#457491,#457492); +#457490 = CARTESIAN_POINT('',(153.73967270064,-144.063857397,-7.5E-02)); +#457491 = DIRECTION('',(-0.,0.,-1.)); +#457492 = DIRECTION('',(0.536692410344,-0.843777966457,-0.)); +#457493 = ORIENTED_EDGE('',*,*,#457494,.T.); +#457494 = EDGE_CURVE('',#457486,#457426,#457495,.T.); +#457495 = LINE('',#457496,#457497); +#457496 = CARTESIAN_POINT('',(153.465634,-144.463049,-7.5E-02)); +#457497 = VECTOR('',#457498,1.); +#457498 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#457499 = FACE_BOUND('',#457500,.T.); +#457500 = EDGE_LOOP('',(#457501,#457512,#457520,#457529,#457537,#457545, + #457554,#457562,#457570)); +#457501 = ORIENTED_EDGE('',*,*,#457502,.T.); +#457502 = EDGE_CURVE('',#457503,#457505,#457507,.T.); +#457503 = VERTEX_POINT('',#457504); +#457504 = CARTESIAN_POINT('',(153.947561,-144.040215,-7.5E-02)); +#457505 = VERTEX_POINT('',#457506); +#457506 = CARTESIAN_POINT('',(153.530608,-144.040215,-7.5E-02)); +#457507 = CIRCLE('',#457508,0.382072162856); +#457508 = AXIS2_PLACEMENT_3D('',#457509,#457510,#457511); +#457509 = CARTESIAN_POINT('',(153.7390845,-144.3603972708,-7.5E-02)); +#457510 = DIRECTION('',(0.,0.,1.)); +#457511 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#457512 = ORIENTED_EDGE('',*,*,#457513,.T.); +#457513 = EDGE_CURVE('',#457505,#457514,#457516,.T.); +#457514 = VERTEX_POINT('',#457515); +#457515 = CARTESIAN_POINT('',(153.494463,-144.076359,-7.5E-02)); +#457516 = LINE('',#457517,#457518); +#457517 = CARTESIAN_POINT('',(153.530608,-144.040215,-7.5E-02)); +#457518 = VECTOR('',#457519,1.); +#457519 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#457520 = ORIENTED_EDGE('',*,*,#457521,.T.); +#457521 = EDGE_CURVE('',#457514,#457522,#457524,.T.); +#457522 = VERTEX_POINT('',#457523); +#457523 = CARTESIAN_POINT('',(153.530608,-144.386601,-7.5E-02)); +#457524 = CIRCLE('',#457525,0.222710800783); +#457525 = AXIS2_PLACEMENT_3D('',#457526,#457527,#457528); +#457526 = CARTESIAN_POINT('',(153.67024834013,-144.2131055355,-7.5E-02) + ); +#457527 = DIRECTION('',(0.,0.,1.)); +#457528 = DIRECTION('',(-0.78929867576,0.614009446543,0.)); +#457529 = ORIENTED_EDGE('',*,*,#457530,.T.); +#457530 = EDGE_CURVE('',#457522,#457531,#457533,.T.); +#457531 = VERTEX_POINT('',#457532); +#457532 = CARTESIAN_POINT('',(153.608032,-144.425313,-7.5E-02)); +#457533 = LINE('',#457534,#457535); +#457534 = CARTESIAN_POINT('',(153.530608,-144.386601,-7.5E-02)); +#457535 = VECTOR('',#457536,1.); +#457536 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#457537 = ORIENTED_EDGE('',*,*,#457538,.T.); +#457538 = EDGE_CURVE('',#457531,#457539,#457541,.T.); +#457539 = VERTEX_POINT('',#457540); +#457540 = CARTESIAN_POINT('',(153.870139,-144.425313,-7.5E-02)); +#457541 = LINE('',#457542,#457543); +#457542 = CARTESIAN_POINT('',(153.608032,-144.425313,-7.5E-02)); +#457543 = VECTOR('',#457544,1.); +#457544 = DIRECTION('',(1.,0.,0.)); +#457545 = ORIENTED_EDGE('',*,*,#457546,.T.); +#457546 = EDGE_CURVE('',#457539,#457547,#457549,.T.); +#457547 = VERTEX_POINT('',#457548); +#457548 = CARTESIAN_POINT('',(154.022419,-144.273033,-7.5E-02)); +#457549 = CIRCLE('',#457550,0.215072998571); +#457550 = AXIS2_PLACEMENT_3D('',#457551,#457552,#457553); +#457551 = CARTESIAN_POINT('',(153.81463213236,-144.2175261323,-7.5E-02) + ); +#457552 = DIRECTION('',(0.,0.,1.)); +#457553 = DIRECTION('',(0.258083850599,-0.966122521247,0.)); +#457554 = ORIENTED_EDGE('',*,*,#457555,.T.); +#457555 = EDGE_CURVE('',#457547,#457556,#457558,.T.); +#457556 = VERTEX_POINT('',#457557); +#457557 = CARTESIAN_POINT('',(154.022419,-144.153783,-7.5E-02)); +#457558 = LINE('',#457559,#457560); +#457559 = CARTESIAN_POINT('',(154.022419,-144.273033,-7.5E-02)); +#457560 = VECTOR('',#457561,1.); +#457561 = DIRECTION('',(0.,1.,0.)); +#457562 = ORIENTED_EDGE('',*,*,#457563,.T.); +#457563 = EDGE_CURVE('',#457556,#457564,#457566,.T.); +#457564 = VERTEX_POINT('',#457565); +#457565 = CARTESIAN_POINT('',(153.983708,-144.076361,-7.5E-02)); +#457566 = LINE('',#457567,#457568); +#457567 = CARTESIAN_POINT('',(154.022419,-144.153783,-7.5E-02)); +#457568 = VECTOR('',#457569,1.); +#457569 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#457570 = ORIENTED_EDGE('',*,*,#457571,.T.); +#457571 = EDGE_CURVE('',#457564,#457503,#457572,.T.); +#457572 = LINE('',#457573,#457574); +#457573 = CARTESIAN_POINT('',(153.983708,-144.076361,-7.5E-02)); +#457574 = VECTOR('',#457575,1.); +#457575 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#457576 = PLANE('',#457577); +#457577 = AXIS2_PLACEMENT_3D('',#457578,#457579,#457580); +#457578 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457579 = DIRECTION('',(-0.,-0.,-1.)); +#457580 = DIRECTION('',(-1.,0.,0.)); +#457581 = SHELL_BASED_SURFACE_MODEL('',(#457582)); +#457582 = OPEN_SHELL('',(#457583)); +#457583 = ADVANCED_FACE('',(#457584,#457764),#457815,.T.); +#457584 = FACE_BOUND('',#457585,.T.); +#457585 = EDGE_LOOP('',(#457586,#457596,#457604,#457612,#457620,#457628, + #457636,#457644,#457652,#457661,#457669,#457677,#457685,#457693, + #457701,#457709,#457717,#457725,#457733,#457741,#457749,#457758)); +#457586 = ORIENTED_EDGE('',*,*,#457587,.T.); +#457587 = EDGE_CURVE('',#457588,#457590,#457592,.T.); +#457588 = VERTEX_POINT('',#457589); +#457589 = CARTESIAN_POINT('',(151.821066,-143.430596,-7.5E-02)); +#457590 = VERTEX_POINT('',#457591); +#457591 = CARTESIAN_POINT('',(151.927392,-143.37994,-7.5E-02)); +#457592 = LINE('',#457593,#457594); +#457593 = CARTESIAN_POINT('',(151.821066,-143.430596,-7.5E-02)); +#457594 = VECTOR('',#457595,1.); +#457595 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#457596 = ORIENTED_EDGE('',*,*,#457597,.T.); +#457597 = EDGE_CURVE('',#457590,#457598,#457600,.T.); +#457598 = VERTEX_POINT('',#457599); +#457599 = CARTESIAN_POINT('',(152.322073,-143.378186,-7.5E-02)); +#457600 = LINE('',#457601,#457602); +#457601 = CARTESIAN_POINT('',(151.927392,-143.37994,-7.5E-02)); +#457602 = VECTOR('',#457603,1.); +#457603 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#457604 = ORIENTED_EDGE('',*,*,#457605,.T.); +#457605 = EDGE_CURVE('',#457598,#457606,#457608,.T.); +#457606 = VERTEX_POINT('',#457607); +#457607 = CARTESIAN_POINT('',(152.341977,-143.382977,-7.5E-02)); +#457608 = LINE('',#457609,#457610); +#457609 = CARTESIAN_POINT('',(152.322073,-143.378186,-7.5E-02)); +#457610 = VECTOR('',#457611,1.); +#457611 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#457612 = ORIENTED_EDGE('',*,*,#457613,.T.); +#457613 = EDGE_CURVE('',#457606,#457614,#457616,.T.); +#457614 = VERTEX_POINT('',#457615); +#457615 = CARTESIAN_POINT('',(152.449807,-143.440367,-7.5E-02)); +#457616 = LINE('',#457617,#457618); +#457617 = CARTESIAN_POINT('',(152.341977,-143.382977,-7.5E-02)); +#457618 = VECTOR('',#457619,1.); +#457619 = DIRECTION('',(0.882758259516,-0.469827473928,0.)); +#457620 = ORIENTED_EDGE('',*,*,#457621,.T.); +#457621 = EDGE_CURVE('',#457614,#457622,#457624,.T.); +#457622 = VERTEX_POINT('',#457623); +#457623 = CARTESIAN_POINT('',(152.508669,-143.551421,-7.5E-02)); +#457624 = LINE('',#457625,#457626); +#457625 = CARTESIAN_POINT('',(152.449807,-143.440367,-7.5E-02)); +#457626 = VECTOR('',#457627,1.); +#457627 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#457628 = ORIENTED_EDGE('',*,*,#457629,.T.); +#457629 = EDGE_CURVE('',#457622,#457630,#457632,.T.); +#457630 = VERTEX_POINT('',#457631); +#457631 = CARTESIAN_POINT('',(152.512475,-143.570555,-7.5E-02)); +#457632 = LINE('',#457633,#457634); +#457633 = CARTESIAN_POINT('',(152.508669,-143.551421,-7.5E-02)); +#457634 = VECTOR('',#457635,1.); +#457635 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#457636 = ORIENTED_EDGE('',*,*,#457637,.T.); +#457637 = EDGE_CURVE('',#457630,#457638,#457640,.T.); +#457638 = VERTEX_POINT('',#457639); +#457639 = CARTESIAN_POINT('',(152.510232,-143.772303,-7.5E-02)); +#457640 = LINE('',#457641,#457642); +#457641 = CARTESIAN_POINT('',(152.512475,-143.570555,-7.5E-02)); +#457642 = VECTOR('',#457643,1.); +#457643 = DIRECTION('',(-1.111714311194E-02,-0.999938202655,0.)); +#457644 = ORIENTED_EDGE('',*,*,#457645,.T.); +#457645 = EDGE_CURVE('',#457638,#457646,#457648,.T.); +#457646 = VERTEX_POINT('',#457647); +#457647 = CARTESIAN_POINT('',(152.459577,-143.87863,-7.5E-02)); +#457648 = LINE('',#457649,#457650); +#457649 = CARTESIAN_POINT('',(152.510232,-143.772303,-7.5E-02)); +#457650 = VECTOR('',#457651,1.); +#457651 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#457652 = ORIENTED_EDGE('',*,*,#457653,.T.); +#457653 = EDGE_CURVE('',#457646,#457654,#457656,.T.); +#457654 = VERTEX_POINT('',#457655); +#457655 = CARTESIAN_POINT('',(152.370135,-143.833908,-7.5E-02)); +#457656 = CIRCLE('',#457657,4.999982161967E-02); +#457657 = AXIS2_PLACEMENT_3D('',#457658,#457659,#457660); +#457658 = CARTESIAN_POINT('',(152.41485599642,-143.8562690071,-7.5E-02) + ); +#457659 = DIRECTION('',(-0.,0.,-1.)); +#457660 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#457661 = ORIENTED_EDGE('',*,*,#457662,.T.); +#457662 = EDGE_CURVE('',#457654,#457663,#457665,.T.); +#457663 = VERTEX_POINT('',#457664); +#457664 = CARTESIAN_POINT('',(152.412475,-143.749227,-7.5E-02)); +#457665 = LINE('',#457666,#457667); +#457666 = CARTESIAN_POINT('',(152.370135,-143.833908,-7.5E-02)); +#457667 = VECTOR('',#457668,1.); +#457668 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#457669 = ORIENTED_EDGE('',*,*,#457670,.T.); +#457670 = EDGE_CURVE('',#457663,#457671,#457673,.T.); +#457671 = VERTEX_POINT('',#457672); +#457672 = CARTESIAN_POINT('',(152.412475,-143.582358,-7.5E-02)); +#457673 = LINE('',#457674,#457675); +#457674 = CARTESIAN_POINT('',(152.412475,-143.749227,-7.5E-02)); +#457675 = VECTOR('',#457676,1.); +#457676 = DIRECTION('',(0.,1.,0.)); +#457677 = ORIENTED_EDGE('',*,*,#457678,.T.); +#457678 = EDGE_CURVE('',#457671,#457679,#457681,.T.); +#457679 = VERTEX_POINT('',#457680); +#457680 = CARTESIAN_POINT('',(152.377588,-143.512584,-7.5E-02)); +#457681 = LINE('',#457682,#457683); +#457682 = CARTESIAN_POINT('',(152.412475,-143.582358,-7.5E-02)); +#457683 = VECTOR('',#457684,1.); +#457684 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#457685 = ORIENTED_EDGE('',*,*,#457686,.T.); +#457686 = EDGE_CURVE('',#457679,#457687,#457689,.T.); +#457687 = VERTEX_POINT('',#457688); +#457688 = CARTESIAN_POINT('',(152.307815,-143.477698,-7.5E-02)); +#457689 = LINE('',#457690,#457691); +#457690 = CARTESIAN_POINT('',(152.377588,-143.512584,-7.5E-02)); +#457691 = VECTOR('',#457692,1.); +#457692 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#457693 = ORIENTED_EDGE('',*,*,#457694,.T.); +#457694 = EDGE_CURVE('',#457687,#457695,#457697,.T.); +#457695 = VERTEX_POINT('',#457696); +#457696 = CARTESIAN_POINT('',(152.170131,-143.477698,-7.5E-02)); +#457697 = LINE('',#457698,#457699); +#457698 = CARTESIAN_POINT('',(152.307815,-143.477698,-7.5E-02)); +#457699 = VECTOR('',#457700,1.); +#457700 = DIRECTION('',(-1.,0.,0.)); +#457701 = ORIENTED_EDGE('',*,*,#457702,.T.); +#457702 = EDGE_CURVE('',#457695,#457703,#457705,.T.); +#457703 = VERTEX_POINT('',#457704); +#457704 = CARTESIAN_POINT('',(152.078317,-143.924801,-7.5E-02)); +#457705 = LINE('',#457706,#457707); +#457706 = CARTESIAN_POINT('',(152.170131,-143.477698,-7.5E-02)); +#457707 = VECTOR('',#457708,1.); +#457708 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#457709 = ORIENTED_EDGE('',*,*,#457710,.T.); +#457710 = EDGE_CURVE('',#457703,#457711,#457713,.T.); +#457711 = VERTEX_POINT('',#457712); +#457712 = CARTESIAN_POINT('',(152.053037,-143.950082,-7.5E-02)); +#457713 = LINE('',#457714,#457715); +#457714 = CARTESIAN_POINT('',(152.078317,-143.924801,-7.5E-02)); +#457715 = VECTOR('',#457716,1.); +#457716 = DIRECTION('',(-0.707092795827,-0.70712076627,0.)); +#457717 = ORIENTED_EDGE('',*,*,#457718,.T.); +#457718 = EDGE_CURVE('',#457711,#457719,#457721,.T.); +#457719 = VERTEX_POINT('',#457720); +#457720 = CARTESIAN_POINT('',(152.033903,-143.953888,-7.5E-02)); +#457721 = LINE('',#457722,#457723); +#457722 = CARTESIAN_POINT('',(152.053037,-143.950082,-7.5E-02)); +#457723 = VECTOR('',#457724,1.); +#457724 = DIRECTION('',(-0.980785174845,-0.195090852695,0.)); +#457725 = ORIENTED_EDGE('',*,*,#457726,.T.); +#457726 = EDGE_CURVE('',#457719,#457727,#457729,.T.); +#457727 = VERTEX_POINT('',#457728); +#457728 = CARTESIAN_POINT('',(151.927392,-143.951645,-7.5E-02)); +#457729 = LINE('',#457730,#457731); +#457730 = CARTESIAN_POINT('',(152.033903,-143.953888,-7.5E-02)); +#457731 = VECTOR('',#457732,1.); +#457732 = DIRECTION('',(-0.999778335979,2.10541897794E-02,0.)); +#457733 = ORIENTED_EDGE('',*,*,#457734,.T.); +#457734 = EDGE_CURVE('',#457727,#457735,#457737,.T.); +#457735 = VERTEX_POINT('',#457736); +#457736 = CARTESIAN_POINT('',(151.810667,-143.894041,-7.5E-02)); +#457737 = LINE('',#457738,#457739); +#457738 = CARTESIAN_POINT('',(151.927392,-143.951645,-7.5E-02)); +#457739 = VECTOR('',#457740,1.); +#457740 = DIRECTION('',(-0.896745928687,0.44254574835,0.)); +#457741 = ORIENTED_EDGE('',*,*,#457742,.T.); +#457742 = EDGE_CURVE('',#457735,#457743,#457745,.T.); +#457743 = VERTEX_POINT('',#457744); +#457744 = CARTESIAN_POINT('',(151.798705,-143.878629,-7.5E-02)); +#457745 = LINE('',#457746,#457747); +#457746 = CARTESIAN_POINT('',(151.810667,-143.894041,-7.5E-02)); +#457747 = VECTOR('',#457748,1.); +#457748 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#457749 = ORIENTED_EDGE('',*,*,#457750,.T.); +#457750 = EDGE_CURVE('',#457743,#457751,#457753,.T.); +#457751 = VERTEX_POINT('',#457752); +#457752 = CARTESIAN_POINT('',(151.805654,-143.442557,-7.5E-02)); +#457753 = CIRCLE('',#457754,0.376597301495); +#457754 = AXIS2_PLACEMENT_3D('',#457755,#457756,#457757); +#457755 = CARTESIAN_POINT('',(152.10918084267,-143.665485202,-7.5E-02)); +#457756 = DIRECTION('',(0.,0.,-1.)); +#457757 = DIRECTION('',(-0.824423970765,-0.565972717035,-0.)); +#457758 = ORIENTED_EDGE('',*,*,#457759,.T.); +#457759 = EDGE_CURVE('',#457751,#457588,#457760,.T.); +#457760 = LINE('',#457761,#457762); +#457761 = CARTESIAN_POINT('',(151.805654,-143.442557,-7.5E-02)); +#457762 = VECTOR('',#457763,1.); +#457763 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#457764 = FACE_BOUND('',#457765,.T.); +#457765 = EDGE_LOOP('',(#457766,#457776,#457784,#457792,#457801,#457809) + ); +#457766 = ORIENTED_EDGE('',*,*,#457767,.T.); +#457767 = EDGE_CURVE('',#457768,#457770,#457772,.T.); +#457768 = VERTEX_POINT('',#457769); +#457769 = CARTESIAN_POINT('',(151.992913,-143.853888,-7.5E-02)); +#457770 = VERTEX_POINT('',#457771); +#457771 = CARTESIAN_POINT('',(152.068151,-143.477698,-7.5E-02)); +#457772 = LINE('',#457773,#457774); +#457773 = CARTESIAN_POINT('',(151.992913,-143.853888,-7.5E-02)); +#457774 = VECTOR('',#457775,1.); +#457775 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#457776 = ORIENTED_EDGE('',*,*,#457777,.T.); +#457777 = EDGE_CURVE('',#457770,#457778,#457780,.T.); +#457778 = VERTEX_POINT('',#457779); +#457779 = CARTESIAN_POINT('',(151.950469,-143.477698,-7.5E-02)); +#457780 = LINE('',#457781,#457782); +#457781 = CARTESIAN_POINT('',(152.068151,-143.477698,-7.5E-02)); +#457782 = VECTOR('',#457783,1.); +#457783 = DIRECTION('',(-1.,0.,0.)); +#457784 = ORIENTED_EDGE('',*,*,#457785,.T.); +#457785 = EDGE_CURVE('',#457778,#457786,#457788,.T.); +#457786 = VERTEX_POINT('',#457787); +#457787 = CARTESIAN_POINT('',(151.880694,-143.512584,-7.5E-02)); +#457788 = LINE('',#457789,#457790); +#457789 = CARTESIAN_POINT('',(151.950469,-143.477698,-7.5E-02)); +#457790 = VECTOR('',#457791,1.); +#457791 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#457792 = ORIENTED_EDGE('',*,*,#457793,.T.); +#457793 = EDGE_CURVE('',#457786,#457794,#457796,.T.); +#457794 = VERTEX_POINT('',#457795); +#457795 = CARTESIAN_POINT('',(151.880694,-143.819001,-7.5E-02)); +#457796 = CIRCLE('',#457797,0.26744056971); +#457797 = AXIS2_PLACEMENT_3D('',#457798,#457799,#457800); +#457798 = CARTESIAN_POINT('',(152.09990078332,-143.6657925,-7.5E-02)); +#457799 = DIRECTION('',(0.,0.,1.)); +#457800 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#457801 = ORIENTED_EDGE('',*,*,#457802,.T.); +#457802 = EDGE_CURVE('',#457794,#457803,#457805,.T.); +#457803 = VERTEX_POINT('',#457804); +#457804 = CARTESIAN_POINT('',(151.950469,-143.853888,-7.5E-02)); +#457805 = LINE('',#457806,#457807); +#457806 = CARTESIAN_POINT('',(151.880694,-143.819001,-7.5E-02)); +#457807 = VECTOR('',#457808,1.); +#457808 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#457809 = ORIENTED_EDGE('',*,*,#457810,.T.); +#457810 = EDGE_CURVE('',#457803,#457768,#457811,.T.); +#457811 = LINE('',#457812,#457813); +#457812 = CARTESIAN_POINT('',(151.950469,-143.853888,-7.5E-02)); +#457813 = VECTOR('',#457814,1.); +#457814 = DIRECTION('',(1.,0.,0.)); +#457815 = PLANE('',#457816); +#457816 = AXIS2_PLACEMENT_3D('',#457817,#457818,#457819); +#457817 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457818 = DIRECTION('',(-0.,-0.,-1.)); +#457819 = DIRECTION('',(-1.,0.,0.)); +#457820 = SHELL_BASED_SURFACE_MODEL('',(#457821)); +#457821 = OPEN_SHELL('',(#457822)); +#457822 = ADVANCED_FACE('',(#457823),#457943,.T.); +#457823 = FACE_BOUND('',#457824,.T.); +#457824 = EDGE_LOOP('',(#457825,#457835,#457843,#457851,#457859,#457867, + #457875,#457883,#457891,#457899,#457907,#457915,#457923,#457929, + #457937)); +#457825 = ORIENTED_EDGE('',*,*,#457826,.T.); +#457826 = EDGE_CURVE('',#457827,#457829,#457831,.T.); +#457827 = VERTEX_POINT('',#457828); +#457828 = CARTESIAN_POINT('',(128.570322,-143.629678,-7.5E-02)); +#457829 = VERTEX_POINT('',#457830); +#457830 = CARTESIAN_POINT('',(128.570322,-142.477316,-7.5E-02)); +#457831 = LINE('',#457832,#457833); +#457832 = CARTESIAN_POINT('',(128.570322,-143.629678,-7.5E-02)); +#457833 = VECTOR('',#457834,1.); +#457834 = DIRECTION('',(0.,1.,0.)); +#457835 = ORIENTED_EDGE('',*,*,#457836,.T.); +#457836 = EDGE_CURVE('',#457829,#457837,#457839,.T.); +#457837 = VERTEX_POINT('',#457838); +#457838 = CARTESIAN_POINT('',(128.858412,-142.477316,-7.5E-02)); +#457839 = LINE('',#457840,#457841); +#457840 = CARTESIAN_POINT('',(128.570322,-142.477316,-7.5E-02)); +#457841 = VECTOR('',#457842,1.); +#457842 = DIRECTION('',(1.,0.,0.)); +#457843 = ORIENTED_EDGE('',*,*,#457844,.T.); +#457844 = EDGE_CURVE('',#457837,#457845,#457847,.T.); +#457845 = VERTEX_POINT('',#457846); +#457846 = CARTESIAN_POINT('',(128.858412,-142.909452,-7.5E-02)); +#457847 = LINE('',#457848,#457849); +#457848 = CARTESIAN_POINT('',(128.858412,-142.477316,-7.5E-02)); +#457849 = VECTOR('',#457850,1.); +#457850 = DIRECTION('',(0.,-1.,0.)); +#457851 = ORIENTED_EDGE('',*,*,#457852,.T.); +#457852 = EDGE_CURVE('',#457845,#457853,#457855,.T.); +#457853 = VERTEX_POINT('',#457854); +#457854 = CARTESIAN_POINT('',(128.858412,-143.341588,-7.5E-02)); +#457855 = LINE('',#457856,#457857); +#457856 = CARTESIAN_POINT('',(128.858412,-142.909452,-7.5E-02)); +#457857 = VECTOR('',#457858,1.); +#457858 = DIRECTION('',(0.,-1.,0.)); +#457859 = ORIENTED_EDGE('',*,*,#457860,.T.); +#457860 = EDGE_CURVE('',#457853,#457861,#457863,.T.); +#457861 = VERTEX_POINT('',#457862); +#457862 = CARTESIAN_POINT('',(129.434594,-143.341588,-7.5E-02)); +#457863 = LINE('',#457864,#457865); +#457864 = CARTESIAN_POINT('',(128.858412,-143.341588,-7.5E-02)); +#457865 = VECTOR('',#457866,1.); +#457866 = DIRECTION('',(1.,0.,0.)); +#457867 = ORIENTED_EDGE('',*,*,#457868,.T.); +#457868 = EDGE_CURVE('',#457861,#457869,#457871,.T.); +#457869 = VERTEX_POINT('',#457870); +#457870 = CARTESIAN_POINT('',(129.434594,-143.053497,-7.5E-02)); +#457871 = LINE('',#457872,#457873); +#457872 = CARTESIAN_POINT('',(129.434594,-143.341588,-7.5E-02)); +#457873 = VECTOR('',#457874,1.); +#457874 = DIRECTION('',(0.,1.,0.)); +#457875 = ORIENTED_EDGE('',*,*,#457876,.T.); +#457876 = EDGE_CURVE('',#457869,#457877,#457879,.T.); +#457877 = VERTEX_POINT('',#457878); +#457878 = CARTESIAN_POINT('',(129.146503,-143.053497,-7.5E-02)); +#457879 = LINE('',#457880,#457881); +#457880 = CARTESIAN_POINT('',(129.434594,-143.053497,-7.5E-02)); +#457881 = VECTOR('',#457882,1.); +#457882 = DIRECTION('',(-1.,0.,0.)); +#457883 = ORIENTED_EDGE('',*,*,#457884,.T.); +#457884 = EDGE_CURVE('',#457877,#457885,#457887,.T.); +#457885 = VERTEX_POINT('',#457886); +#457886 = CARTESIAN_POINT('',(129.146503,-142.765406,-7.5E-02)); +#457887 = LINE('',#457888,#457889); +#457888 = CARTESIAN_POINT('',(129.146503,-143.053497,-7.5E-02)); +#457889 = VECTOR('',#457890,1.); +#457890 = DIRECTION('',(0.,1.,0.)); +#457891 = ORIENTED_EDGE('',*,*,#457892,.T.); +#457892 = EDGE_CURVE('',#457885,#457893,#457895,.T.); +#457893 = VERTEX_POINT('',#457894); +#457894 = CARTESIAN_POINT('',(130.010775,-142.765406,-7.5E-02)); +#457895 = LINE('',#457896,#457897); +#457896 = CARTESIAN_POINT('',(129.146503,-142.765406,-7.5E-02)); +#457897 = VECTOR('',#457898,1.); +#457898 = DIRECTION('',(1.,0.,0.)); +#457899 = ORIENTED_EDGE('',*,*,#457900,.T.); +#457900 = EDGE_CURVE('',#457893,#457901,#457903,.T.); +#457901 = VERTEX_POINT('',#457902); +#457902 = CARTESIAN_POINT('',(130.010775,-143.053497,-7.5E-02)); +#457903 = LINE('',#457904,#457905); +#457904 = CARTESIAN_POINT('',(130.010775,-142.765406,-7.5E-02)); +#457905 = VECTOR('',#457906,1.); +#457906 = DIRECTION('',(0.,-1.,0.)); +#457907 = ORIENTED_EDGE('',*,*,#457908,.T.); +#457908 = EDGE_CURVE('',#457901,#457909,#457911,.T.); +#457909 = VERTEX_POINT('',#457910); +#457910 = CARTESIAN_POINT('',(129.722684,-143.053497,-7.5E-02)); +#457911 = LINE('',#457912,#457913); +#457912 = CARTESIAN_POINT('',(130.010775,-143.053497,-7.5E-02)); +#457913 = VECTOR('',#457914,1.); +#457914 = DIRECTION('',(-1.,0.,0.)); +#457915 = ORIENTED_EDGE('',*,*,#457916,.T.); +#457916 = EDGE_CURVE('',#457909,#457917,#457919,.T.); +#457917 = VERTEX_POINT('',#457918); +#457918 = CARTESIAN_POINT('',(129.722684,-143.341588,-7.5E-02)); +#457919 = LINE('',#457920,#457921); +#457920 = CARTESIAN_POINT('',(129.722684,-143.053497,-7.5E-02)); +#457921 = VECTOR('',#457922,1.); +#457922 = DIRECTION('',(0.,-1.,0.)); +#457923 = ORIENTED_EDGE('',*,*,#457924,.T.); +#457924 = EDGE_CURVE('',#457917,#457861,#457925,.T.); +#457925 = LINE('',#457926,#457927); +#457926 = CARTESIAN_POINT('',(129.722684,-143.341588,-7.5E-02)); +#457927 = VECTOR('',#457928,1.); +#457928 = DIRECTION('',(-1.,0.,0.)); +#457929 = ORIENTED_EDGE('',*,*,#457930,.T.); +#457930 = EDGE_CURVE('',#457861,#457931,#457933,.T.); +#457931 = VERTEX_POINT('',#457932); +#457932 = CARTESIAN_POINT('',(129.434594,-143.629678,-7.5E-02)); +#457933 = LINE('',#457934,#457935); +#457934 = CARTESIAN_POINT('',(129.434594,-143.341588,-7.5E-02)); +#457935 = VECTOR('',#457936,1.); +#457936 = DIRECTION('',(0.,-1.,0.)); +#457937 = ORIENTED_EDGE('',*,*,#457938,.T.); +#457938 = EDGE_CURVE('',#457931,#457827,#457939,.T.); +#457939 = LINE('',#457940,#457941); +#457940 = CARTESIAN_POINT('',(129.434594,-143.629678,-7.5E-02)); +#457941 = VECTOR('',#457942,1.); +#457942 = DIRECTION('',(-1.,0.,0.)); +#457943 = PLANE('',#457944); +#457944 = AXIS2_PLACEMENT_3D('',#457945,#457946,#457947); +#457945 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457946 = DIRECTION('',(-0.,-0.,-1.)); +#457947 = DIRECTION('',(-1.,0.,0.)); +#457948 = SHELL_BASED_SURFACE_MODEL('',(#457949)); +#457949 = OPEN_SHELL('',(#457950)); +#457950 = ADVANCED_FACE('',(#457951),#457993,.T.); +#457951 = FACE_BOUND('',#457952,.T.); +#457952 = EDGE_LOOP('',(#457953,#457963,#457971,#457979,#457987)); +#457953 = ORIENTED_EDGE('',*,*,#457954,.T.); +#457954 = EDGE_CURVE('',#457955,#457957,#457959,.T.); +#457955 = VERTEX_POINT('',#457956); +#457956 = CARTESIAN_POINT('',(129.722684,-143.341588,-7.5E-02)); +#457957 = VERTEX_POINT('',#457958); +#457958 = CARTESIAN_POINT('',(129.86673,-143.341588,-7.5E-02)); +#457959 = LINE('',#457960,#457961); +#457960 = CARTESIAN_POINT('',(129.722684,-143.341588,-7.5E-02)); +#457961 = VECTOR('',#457962,1.); +#457962 = DIRECTION('',(1.,0.,0.)); +#457963 = ORIENTED_EDGE('',*,*,#457964,.T.); +#457964 = EDGE_CURVE('',#457957,#457965,#457967,.T.); +#457965 = VERTEX_POINT('',#457966); +#457966 = CARTESIAN_POINT('',(130.010775,-143.341588,-7.5E-02)); +#457967 = LINE('',#457968,#457969); +#457968 = CARTESIAN_POINT('',(129.86673,-143.341588,-7.5E-02)); +#457969 = VECTOR('',#457970,1.); +#457970 = DIRECTION('',(1.,0.,0.)); +#457971 = ORIENTED_EDGE('',*,*,#457972,.T.); +#457972 = EDGE_CURVE('',#457965,#457973,#457975,.T.); +#457973 = VERTEX_POINT('',#457974); +#457974 = CARTESIAN_POINT('',(130.010775,-143.629678,-7.5E-02)); +#457975 = LINE('',#457976,#457977); +#457976 = CARTESIAN_POINT('',(130.010775,-143.341588,-7.5E-02)); +#457977 = VECTOR('',#457978,1.); +#457978 = DIRECTION('',(0.,-1.,0.)); +#457979 = ORIENTED_EDGE('',*,*,#457980,.T.); +#457980 = EDGE_CURVE('',#457973,#457981,#457983,.T.); +#457981 = VERTEX_POINT('',#457982); +#457982 = CARTESIAN_POINT('',(129.722684,-143.629678,-7.5E-02)); +#457983 = LINE('',#457984,#457985); +#457984 = CARTESIAN_POINT('',(130.010775,-143.629678,-7.5E-02)); +#457985 = VECTOR('',#457986,1.); +#457986 = DIRECTION('',(-1.,0.,0.)); +#457987 = ORIENTED_EDGE('',*,*,#457988,.T.); +#457988 = EDGE_CURVE('',#457981,#457955,#457989,.T.); +#457989 = LINE('',#457990,#457991); +#457990 = CARTESIAN_POINT('',(129.722684,-143.629678,-7.5E-02)); +#457991 = VECTOR('',#457992,1.); +#457992 = DIRECTION('',(0.,1.,0.)); +#457993 = PLANE('',#457994); +#457994 = AXIS2_PLACEMENT_3D('',#457995,#457996,#457997); +#457995 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#457996 = DIRECTION('',(-0.,-0.,-1.)); +#457997 = DIRECTION('',(-1.,0.,0.)); +#457998 = SHELL_BASED_SURFACE_MODEL('',(#457999)); +#457999 = OPEN_SHELL('',(#458000)); +#458000 = ADVANCED_FACE('',(#458001),#458043,.T.); +#458001 = FACE_BOUND('',#458002,.T.); +#458002 = EDGE_LOOP('',(#458003,#458013,#458021,#458029,#458037)); +#458003 = ORIENTED_EDGE('',*,*,#458004,.T.); +#458004 = EDGE_CURVE('',#458005,#458007,#458009,.T.); +#458005 = VERTEX_POINT('',#458006); +#458006 = CARTESIAN_POINT('',(130.298866,-143.629678,-7.5E-02)); +#458007 = VERTEX_POINT('',#458008); +#458008 = CARTESIAN_POINT('',(130.298866,-143.341588,-7.5E-02)); +#458009 = LINE('',#458010,#458011); +#458010 = CARTESIAN_POINT('',(130.298866,-143.629678,-7.5E-02)); +#458011 = VECTOR('',#458012,1.); +#458012 = DIRECTION('',(0.,1.,0.)); +#458013 = ORIENTED_EDGE('',*,*,#458014,.T.); +#458014 = EDGE_CURVE('',#458007,#458015,#458017,.T.); +#458015 = VERTEX_POINT('',#458016); +#458016 = CARTESIAN_POINT('',(130.586957,-143.341588,-7.5E-02)); +#458017 = LINE('',#458018,#458019); +#458018 = CARTESIAN_POINT('',(130.298866,-143.341588,-7.5E-02)); +#458019 = VECTOR('',#458020,1.); +#458020 = DIRECTION('',(1.,0.,0.)); +#458021 = ORIENTED_EDGE('',*,*,#458022,.T.); +#458022 = EDGE_CURVE('',#458015,#458023,#458025,.T.); +#458023 = VERTEX_POINT('',#458024); +#458024 = CARTESIAN_POINT('',(130.586957,-143.485633,-7.5E-02)); +#458025 = LINE('',#458026,#458027); +#458026 = CARTESIAN_POINT('',(130.586957,-143.341588,-7.5E-02)); +#458027 = VECTOR('',#458028,1.); +#458028 = DIRECTION('',(0.,-1.,0.)); +#458029 = ORIENTED_EDGE('',*,*,#458030,.T.); +#458030 = EDGE_CURVE('',#458023,#458031,#458033,.T.); +#458031 = VERTEX_POINT('',#458032); +#458032 = CARTESIAN_POINT('',(130.586957,-143.629678,-7.5E-02)); +#458033 = LINE('',#458034,#458035); +#458034 = CARTESIAN_POINT('',(130.586957,-143.485633,-7.5E-02)); +#458035 = VECTOR('',#458036,1.); +#458036 = DIRECTION('',(0.,-1.,0.)); +#458037 = ORIENTED_EDGE('',*,*,#458038,.T.); +#458038 = EDGE_CURVE('',#458031,#458005,#458039,.T.); +#458039 = LINE('',#458040,#458041); +#458040 = CARTESIAN_POINT('',(130.586957,-143.629678,-7.5E-02)); +#458041 = VECTOR('',#458042,1.); +#458042 = DIRECTION('',(-1.,0.,0.)); +#458043 = PLANE('',#458044); +#458044 = AXIS2_PLACEMENT_3D('',#458045,#458046,#458047); +#458045 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#458046 = DIRECTION('',(-0.,-0.,-1.)); +#458047 = DIRECTION('',(-1.,0.,0.)); +#458048 = SHELL_BASED_SURFACE_MODEL('',(#458049)); +#458049 = OPEN_SHELL('',(#458050)); +#458050 = ADVANCED_FACE('',(#458051),#458093,.T.); +#458051 = FACE_BOUND('',#458052,.T.); +#458052 = EDGE_LOOP('',(#458053,#458063,#458071,#458079,#458087)); +#458053 = ORIENTED_EDGE('',*,*,#458054,.T.); +#458054 = EDGE_CURVE('',#458055,#458057,#458059,.T.); +#458055 = VERTEX_POINT('',#458056); +#458056 = CARTESIAN_POINT('',(131.451229,-142.765406,-7.5E-02)); +#458057 = VERTEX_POINT('',#458058); +#458058 = CARTESIAN_POINT('',(131.451229,-142.477316,-7.5E-02)); +#458059 = LINE('',#458060,#458061); +#458060 = CARTESIAN_POINT('',(131.451229,-142.765406,-7.5E-02)); +#458061 = VECTOR('',#458062,1.); +#458062 = DIRECTION('',(0.,1.,0.)); +#458063 = ORIENTED_EDGE('',*,*,#458064,.T.); +#458064 = EDGE_CURVE('',#458057,#458065,#458067,.T.); +#458065 = VERTEX_POINT('',#458066); +#458066 = CARTESIAN_POINT('',(131.73932,-142.477316,-7.5E-02)); +#458067 = LINE('',#458068,#458069); +#458068 = CARTESIAN_POINT('',(131.451229,-142.477316,-7.5E-02)); +#458069 = VECTOR('',#458070,1.); +#458070 = DIRECTION('',(1.,0.,0.)); +#458071 = ORIENTED_EDGE('',*,*,#458072,.T.); +#458072 = EDGE_CURVE('',#458065,#458073,#458075,.T.); +#458073 = VERTEX_POINT('',#458074); +#458074 = CARTESIAN_POINT('',(131.73932,-142.621361,-7.5E-02)); +#458075 = LINE('',#458076,#458077); +#458076 = CARTESIAN_POINT('',(131.73932,-142.477316,-7.5E-02)); +#458077 = VECTOR('',#458078,1.); +#458078 = DIRECTION('',(0.,-1.,0.)); +#458079 = ORIENTED_EDGE('',*,*,#458080,.T.); +#458080 = EDGE_CURVE('',#458073,#458081,#458083,.T.); +#458081 = VERTEX_POINT('',#458082); +#458082 = CARTESIAN_POINT('',(131.73932,-142.765406,-7.5E-02)); +#458083 = LINE('',#458084,#458085); +#458084 = CARTESIAN_POINT('',(131.73932,-142.621361,-7.5E-02)); +#458085 = VECTOR('',#458086,1.); +#458086 = DIRECTION('',(0.,-1.,0.)); +#458087 = ORIENTED_EDGE('',*,*,#458088,.T.); +#458088 = EDGE_CURVE('',#458081,#458055,#458089,.T.); +#458089 = LINE('',#458090,#458091); +#458090 = CARTESIAN_POINT('',(131.73932,-142.765406,-7.5E-02)); +#458091 = VECTOR('',#458092,1.); +#458092 = DIRECTION('',(-1.,0.,0.)); +#458093 = PLANE('',#458094); +#458094 = AXIS2_PLACEMENT_3D('',#458095,#458096,#458097); +#458095 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#458096 = DIRECTION('',(-0.,-0.,-1.)); +#458097 = DIRECTION('',(-1.,0.,0.)); +#458098 = SHELL_BASED_SURFACE_MODEL('',(#458099)); +#458099 = OPEN_SHELL('',(#458100)); +#458100 = ADVANCED_FACE('',(#458101),#458143,.T.); +#458101 = FACE_BOUND('',#458102,.T.); +#458102 = EDGE_LOOP('',(#458103,#458113,#458121,#458129,#458137)); +#458103 = ORIENTED_EDGE('',*,*,#458104,.T.); +#458104 = EDGE_CURVE('',#458105,#458107,#458109,.T.); +#458105 = VERTEX_POINT('',#458106); +#458106 = CARTESIAN_POINT('',(130.298866,-141.901134,-7.5E-02)); +#458107 = VERTEX_POINT('',#458108); +#458108 = CARTESIAN_POINT('',(130.298866,-141.613043,-7.5E-02)); +#458109 = LINE('',#458110,#458111); +#458110 = CARTESIAN_POINT('',(130.298866,-141.901134,-7.5E-02)); +#458111 = VECTOR('',#458112,1.); +#458112 = DIRECTION('',(0.,1.,0.)); +#458113 = ORIENTED_EDGE('',*,*,#458114,.T.); +#458114 = EDGE_CURVE('',#458107,#458115,#458117,.T.); +#458115 = VERTEX_POINT('',#458116); +#458116 = CARTESIAN_POINT('',(130.586957,-141.613043,-7.5E-02)); +#458117 = LINE('',#458118,#458119); +#458118 = CARTESIAN_POINT('',(130.298866,-141.613043,-7.5E-02)); +#458119 = VECTOR('',#458120,1.); +#458120 = DIRECTION('',(1.,0.,0.)); +#458121 = ORIENTED_EDGE('',*,*,#458122,.T.); +#458122 = EDGE_CURVE('',#458115,#458123,#458125,.T.); +#458123 = VERTEX_POINT('',#458124); +#458124 = CARTESIAN_POINT('',(130.586957,-141.757089,-7.5E-02)); +#458125 = LINE('',#458126,#458127); +#458126 = CARTESIAN_POINT('',(130.586957,-141.613043,-7.5E-02)); +#458127 = VECTOR('',#458128,1.); +#458128 = DIRECTION('',(0.,-1.,0.)); +#458129 = ORIENTED_EDGE('',*,*,#458130,.T.); +#458130 = EDGE_CURVE('',#458123,#458131,#458133,.T.); +#458131 = VERTEX_POINT('',#458132); +#458132 = CARTESIAN_POINT('',(130.586957,-141.901134,-7.5E-02)); +#458133 = LINE('',#458134,#458135); +#458134 = CARTESIAN_POINT('',(130.586957,-141.757089,-7.5E-02)); +#458135 = VECTOR('',#458136,1.); +#458136 = DIRECTION('',(0.,-1.,0.)); +#458137 = ORIENTED_EDGE('',*,*,#458138,.T.); +#458138 = EDGE_CURVE('',#458131,#458105,#458139,.T.); +#458139 = LINE('',#458140,#458141); +#458140 = CARTESIAN_POINT('',(130.586957,-141.901134,-7.5E-02)); +#458141 = VECTOR('',#458142,1.); +#458142 = DIRECTION('',(-1.,0.,0.)); +#458143 = PLANE('',#458144); +#458144 = AXIS2_PLACEMENT_3D('',#458145,#458146,#458147); +#458145 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#458146 = DIRECTION('',(-0.,-0.,-1.)); +#458147 = DIRECTION('',(-1.,0.,0.)); +#458148 = SHELL_BASED_SURFACE_MODEL('',(#458149)); +#458149 = OPEN_SHELL('',(#458150)); +#458150 = ADVANCED_FACE('',(#458151,#459539,#459589,#459679,#459721, + #459755,#459789,#459831,#459873,#459915,#459949,#460097,#460139), + #460181,.T.); +#458151 = FACE_BOUND('',#458152,.T.); +#458152 = EDGE_LOOP('',(#458153,#458163,#458171,#458179,#458187,#458195, + #458201,#458209,#458217,#458225,#458233,#458241,#458249,#458257, + #458265,#458273,#458281,#458289,#458297,#458305,#458313,#458321, + #458329,#458337,#458345,#458353,#458361,#458369,#458377,#458385, + #458393,#458401,#458409,#458417,#458423,#458431,#458437,#458445, + #458453,#458461,#458469,#458477,#458485,#458493,#458501,#458509, + #458517,#458525,#458533,#458539,#458547,#458555,#458563,#458571, + #458579,#458585,#458591,#458599,#458607,#458615,#458623,#458631, + #458637,#458645,#458653,#458661,#458669,#458677,#458685,#458691, + #458699,#458707,#458715,#458723,#458731,#458739,#458747,#458755, + #458763,#458771,#458779,#458787,#458795,#458803,#458811,#458819, + #458827,#458835,#458843,#458851,#458859,#458867,#458875,#458883, + #458889,#458897,#458905,#458913,#458921,#458929,#458937,#458945, + #458953,#458961,#458969,#458977,#458985,#458993,#459001,#459009, + #459017,#459025,#459033,#459041,#459049,#459057,#459065,#459073, + #459081,#459089,#459097,#459105,#459113,#459121,#459129,#459137, + #459145,#459153,#459161,#459169,#459177,#459185,#459193,#459201, + #459209,#459217,#459225,#459233,#459241,#459249,#459257,#459265, + #459273,#459281,#459289,#459297,#459305,#459313,#459321,#459327, + #459335,#459343,#459351,#459359,#459367,#459375,#459383,#459391, + #459399,#459407,#459415,#459423,#459431,#459439,#459447,#459455, + #459463,#459471,#459479,#459487,#459495,#459503,#459511,#459519, + #459527,#459533)); +#458153 = ORIENTED_EDGE('',*,*,#458154,.T.); +#458154 = EDGE_CURVE('',#458155,#458157,#458159,.T.); +#458155 = VERTEX_POINT('',#458156); +#458156 = CARTESIAN_POINT('',(133.755955,-137.579773,-7.5E-02)); +#458157 = VERTEX_POINT('',#458158); +#458158 = CARTESIAN_POINT('',(133.755955,-136.715501,-7.5E-02)); +#458159 = LINE('',#458160,#458161); +#458160 = CARTESIAN_POINT('',(133.755955,-137.579773,-7.5E-02)); +#458161 = VECTOR('',#458162,1.); +#458162 = DIRECTION('',(0.,1.,0.)); +#458163 = ORIENTED_EDGE('',*,*,#458164,.T.); +#458164 = EDGE_CURVE('',#458157,#458165,#458167,.T.); +#458165 = VERTEX_POINT('',#458166); +#458166 = CARTESIAN_POINT('',(134.332136,-136.715501,-7.5E-02)); +#458167 = LINE('',#458168,#458169); +#458168 = CARTESIAN_POINT('',(133.755955,-136.715501,-7.5E-02)); +#458169 = VECTOR('',#458170,1.); +#458170 = DIRECTION('',(1.,0.,0.)); +#458171 = ORIENTED_EDGE('',*,*,#458172,.T.); +#458172 = EDGE_CURVE('',#458165,#458173,#458175,.T.); +#458173 = VERTEX_POINT('',#458174); +#458174 = CARTESIAN_POINT('',(134.332136,-137.003592,-7.5E-02)); +#458175 = LINE('',#458176,#458177); +#458176 = CARTESIAN_POINT('',(134.332136,-136.715501,-7.5E-02)); +#458177 = VECTOR('',#458178,1.); +#458178 = DIRECTION('',(0.,-1.,0.)); +#458179 = ORIENTED_EDGE('',*,*,#458180,.T.); +#458180 = EDGE_CURVE('',#458173,#458181,#458183,.T.); +#458181 = VERTEX_POINT('',#458182); +#458182 = CARTESIAN_POINT('',(134.044046,-137.003592,-7.5E-02)); +#458183 = LINE('',#458184,#458185); +#458184 = CARTESIAN_POINT('',(134.332136,-137.003592,-7.5E-02)); +#458185 = VECTOR('',#458186,1.); +#458186 = DIRECTION('',(-1.,0.,0.)); +#458187 = ORIENTED_EDGE('',*,*,#458188,.T.); +#458188 = EDGE_CURVE('',#458181,#458189,#458191,.T.); +#458189 = VERTEX_POINT('',#458190); +#458190 = CARTESIAN_POINT('',(134.044046,-137.579773,-7.5E-02)); +#458191 = LINE('',#458192,#458193); +#458192 = CARTESIAN_POINT('',(134.044046,-137.003592,-7.5E-02)); +#458193 = VECTOR('',#458194,1.); +#458194 = DIRECTION('',(0.,-1.,0.)); +#458195 = ORIENTED_EDGE('',*,*,#458196,.T.); +#458196 = EDGE_CURVE('',#458189,#458155,#458197,.T.); +#458197 = LINE('',#458198,#458199); +#458198 = CARTESIAN_POINT('',(134.044046,-137.579773,-7.5E-02)); +#458199 = VECTOR('',#458200,1.); +#458200 = DIRECTION('',(-1.,0.,0.)); +#458201 = ORIENTED_EDGE('',*,*,#458202,.T.); +#458202 = EDGE_CURVE('',#458155,#458203,#458205,.T.); +#458203 = VERTEX_POINT('',#458204); +#458204 = CARTESIAN_POINT('',(133.755955,-137.867864,-7.5E-02)); +#458205 = LINE('',#458206,#458207); +#458206 = CARTESIAN_POINT('',(133.755955,-137.579773,-7.5E-02)); +#458207 = VECTOR('',#458208,1.); +#458208 = DIRECTION('',(0.,-1.,0.)); +#458209 = ORIENTED_EDGE('',*,*,#458210,.T.); +#458210 = EDGE_CURVE('',#458203,#458211,#458213,.T.); +#458211 = VERTEX_POINT('',#458212); +#458212 = CARTESIAN_POINT('',(133.467864,-137.867864,-7.5E-02)); +#458213 = LINE('',#458214,#458215); +#458214 = CARTESIAN_POINT('',(133.755955,-137.867864,-7.5E-02)); +#458215 = VECTOR('',#458216,1.); +#458216 = DIRECTION('',(-1.,0.,0.)); +#458217 = ORIENTED_EDGE('',*,*,#458218,.T.); +#458218 = EDGE_CURVE('',#458211,#458219,#458221,.T.); +#458219 = VERTEX_POINT('',#458220); +#458220 = CARTESIAN_POINT('',(133.467864,-137.579773,-7.5E-02)); +#458221 = LINE('',#458222,#458223); +#458222 = CARTESIAN_POINT('',(133.467864,-137.867864,-7.5E-02)); +#458223 = VECTOR('',#458224,1.); +#458224 = DIRECTION('',(0.,1.,0.)); +#458225 = ORIENTED_EDGE('',*,*,#458226,.T.); +#458226 = EDGE_CURVE('',#458219,#458227,#458229,.T.); +#458227 = VERTEX_POINT('',#458228); +#458228 = CARTESIAN_POINT('',(133.179773,-137.579773,-7.5E-02)); +#458229 = LINE('',#458230,#458231); +#458230 = CARTESIAN_POINT('',(133.467864,-137.579773,-7.5E-02)); +#458231 = VECTOR('',#458232,1.); +#458232 = DIRECTION('',(-1.,0.,0.)); +#458233 = ORIENTED_EDGE('',*,*,#458234,.T.); +#458234 = EDGE_CURVE('',#458227,#458235,#458237,.T.); +#458235 = VERTEX_POINT('',#458236); +#458236 = CARTESIAN_POINT('',(133.179773,-137.867864,-7.5E-02)); +#458237 = LINE('',#458238,#458239); +#458238 = CARTESIAN_POINT('',(133.179773,-137.579773,-7.5E-02)); +#458239 = VECTOR('',#458240,1.); +#458240 = DIRECTION('',(0.,-1.,0.)); +#458241 = ORIENTED_EDGE('',*,*,#458242,.T.); +#458242 = EDGE_CURVE('',#458235,#458243,#458245,.T.); +#458243 = VERTEX_POINT('',#458244); +#458244 = CARTESIAN_POINT('',(132.891683,-137.867864,-7.5E-02)); +#458245 = LINE('',#458246,#458247); +#458246 = CARTESIAN_POINT('',(133.179773,-137.867864,-7.5E-02)); +#458247 = VECTOR('',#458248,1.); +#458248 = DIRECTION('',(-1.,0.,0.)); +#458249 = ORIENTED_EDGE('',*,*,#458250,.T.); +#458250 = EDGE_CURVE('',#458243,#458251,#458253,.T.); +#458251 = VERTEX_POINT('',#458252); +#458252 = CARTESIAN_POINT('',(132.891683,-138.732136,-7.5E-02)); +#458253 = LINE('',#458254,#458255); +#458254 = CARTESIAN_POINT('',(132.891683,-137.867864,-7.5E-02)); +#458255 = VECTOR('',#458256,1.); +#458256 = DIRECTION('',(0.,-1.,0.)); +#458257 = ORIENTED_EDGE('',*,*,#458258,.T.); +#458258 = EDGE_CURVE('',#458251,#458259,#458261,.T.); +#458259 = VERTEX_POINT('',#458260); +#458260 = CARTESIAN_POINT('',(133.179773,-138.732136,-7.5E-02)); +#458261 = LINE('',#458262,#458263); +#458262 = CARTESIAN_POINT('',(132.891683,-138.732136,-7.5E-02)); +#458263 = VECTOR('',#458264,1.); +#458264 = DIRECTION('',(1.,0.,0.)); +#458265 = ORIENTED_EDGE('',*,*,#458266,.T.); +#458266 = EDGE_CURVE('',#458259,#458267,#458269,.T.); +#458267 = VERTEX_POINT('',#458268); +#458268 = CARTESIAN_POINT('',(133.179773,-139.308317,-7.5E-02)); +#458269 = LINE('',#458270,#458271); +#458270 = CARTESIAN_POINT('',(133.179773,-138.732136,-7.5E-02)); +#458271 = VECTOR('',#458272,1.); +#458272 = DIRECTION('',(0.,-1.,0.)); +#458273 = ORIENTED_EDGE('',*,*,#458274,.T.); +#458274 = EDGE_CURVE('',#458267,#458275,#458277,.T.); +#458275 = VERTEX_POINT('',#458276); +#458276 = CARTESIAN_POINT('',(132.891683,-139.308317,-7.5E-02)); +#458277 = LINE('',#458278,#458279); +#458278 = CARTESIAN_POINT('',(133.179773,-139.308317,-7.5E-02)); +#458279 = VECTOR('',#458280,1.); +#458280 = DIRECTION('',(-1.,0.,0.)); +#458281 = ORIENTED_EDGE('',*,*,#458282,.T.); +#458282 = EDGE_CURVE('',#458275,#458283,#458285,.T.); +#458283 = VERTEX_POINT('',#458284); +#458284 = CARTESIAN_POINT('',(132.891683,-139.020227,-7.5E-02)); +#458285 = LINE('',#458286,#458287); +#458286 = CARTESIAN_POINT('',(132.891683,-139.308317,-7.5E-02)); +#458287 = VECTOR('',#458288,1.); +#458288 = DIRECTION('',(0.,1.,0.)); +#458289 = ORIENTED_EDGE('',*,*,#458290,.T.); +#458290 = EDGE_CURVE('',#458283,#458291,#458293,.T.); +#458291 = VERTEX_POINT('',#458292); +#458292 = CARTESIAN_POINT('',(132.603592,-139.020227,-7.5E-02)); +#458293 = LINE('',#458294,#458295); +#458294 = CARTESIAN_POINT('',(132.891683,-139.020227,-7.5E-02)); +#458295 = VECTOR('',#458296,1.); +#458296 = DIRECTION('',(-1.,0.,0.)); +#458297 = ORIENTED_EDGE('',*,*,#458298,.T.); +#458298 = EDGE_CURVE('',#458291,#458299,#458301,.T.); +#458299 = VERTEX_POINT('',#458300); +#458300 = CARTESIAN_POINT('',(132.603592,-139.308317,-7.5E-02)); +#458301 = LINE('',#458302,#458303); +#458302 = CARTESIAN_POINT('',(132.603592,-139.020227,-7.5E-02)); +#458303 = VECTOR('',#458304,1.); +#458304 = DIRECTION('',(0.,-1.,0.)); +#458305 = ORIENTED_EDGE('',*,*,#458306,.T.); +#458306 = EDGE_CURVE('',#458299,#458307,#458309,.T.); +#458307 = VERTEX_POINT('',#458308); +#458308 = CARTESIAN_POINT('',(132.315501,-139.308317,-7.5E-02)); +#458309 = LINE('',#458310,#458311); +#458310 = CARTESIAN_POINT('',(132.603592,-139.308317,-7.5E-02)); +#458311 = VECTOR('',#458312,1.); +#458312 = DIRECTION('',(-1.,0.,0.)); +#458313 = ORIENTED_EDGE('',*,*,#458314,.T.); +#458314 = EDGE_CURVE('',#458307,#458315,#458317,.T.); +#458315 = VERTEX_POINT('',#458316); +#458316 = CARTESIAN_POINT('',(132.315501,-139.596408,-7.5E-02)); +#458317 = LINE('',#458318,#458319); +#458318 = CARTESIAN_POINT('',(132.315501,-139.308317,-7.5E-02)); +#458319 = VECTOR('',#458320,1.); +#458320 = DIRECTION('',(0.,-1.,0.)); +#458321 = ORIENTED_EDGE('',*,*,#458322,.T.); +#458322 = EDGE_CURVE('',#458315,#458323,#458325,.T.); +#458323 = VERTEX_POINT('',#458324); +#458324 = CARTESIAN_POINT('',(132.02741,-139.596408,-7.5E-02)); +#458325 = LINE('',#458326,#458327); +#458326 = CARTESIAN_POINT('',(132.315501,-139.596408,-7.5E-02)); +#458327 = VECTOR('',#458328,1.); +#458328 = DIRECTION('',(-1.,0.,0.)); +#458329 = ORIENTED_EDGE('',*,*,#458330,.T.); +#458330 = EDGE_CURVE('',#458323,#458331,#458333,.T.); +#458331 = VERTEX_POINT('',#458332); +#458332 = CARTESIAN_POINT('',(132.02741,-139.884499,-7.5E-02)); +#458333 = LINE('',#458334,#458335); +#458334 = CARTESIAN_POINT('',(132.02741,-139.596408,-7.5E-02)); +#458335 = VECTOR('',#458336,1.); +#458336 = DIRECTION('',(0.,-1.,0.)); +#458337 = ORIENTED_EDGE('',*,*,#458338,.T.); +#458338 = EDGE_CURVE('',#458331,#458339,#458341,.T.); +#458339 = VERTEX_POINT('',#458340); +#458340 = CARTESIAN_POINT('',(131.73932,-139.884499,-7.5E-02)); +#458341 = LINE('',#458342,#458343); +#458342 = CARTESIAN_POINT('',(132.02741,-139.884499,-7.5E-02)); +#458343 = VECTOR('',#458344,1.); +#458344 = DIRECTION('',(-1.,0.,0.)); +#458345 = ORIENTED_EDGE('',*,*,#458346,.T.); +#458346 = EDGE_CURVE('',#458339,#458347,#458349,.T.); +#458347 = VERTEX_POINT('',#458348); +#458348 = CARTESIAN_POINT('',(131.73932,-139.596408,-7.5E-02)); +#458349 = LINE('',#458350,#458351); +#458350 = CARTESIAN_POINT('',(131.73932,-139.884499,-7.5E-02)); +#458351 = VECTOR('',#458352,1.); +#458352 = DIRECTION('',(0.,1.,0.)); +#458353 = ORIENTED_EDGE('',*,*,#458354,.T.); +#458354 = EDGE_CURVE('',#458347,#458355,#458357,.T.); +#458355 = VERTEX_POINT('',#458356); +#458356 = CARTESIAN_POINT('',(131.451229,-139.596408,-7.5E-02)); +#458357 = LINE('',#458358,#458359); +#458358 = CARTESIAN_POINT('',(131.73932,-139.596408,-7.5E-02)); +#458359 = VECTOR('',#458360,1.); +#458360 = DIRECTION('',(-1.,0.,0.)); +#458361 = ORIENTED_EDGE('',*,*,#458362,.T.); +#458362 = EDGE_CURVE('',#458355,#458363,#458365,.T.); +#458363 = VERTEX_POINT('',#458364); +#458364 = CARTESIAN_POINT('',(131.451229,-139.884499,-7.5E-02)); +#458365 = LINE('',#458366,#458367); +#458366 = CARTESIAN_POINT('',(131.451229,-139.596408,-7.5E-02)); +#458367 = VECTOR('',#458368,1.); +#458368 = DIRECTION('',(0.,-1.,0.)); +#458369 = ORIENTED_EDGE('',*,*,#458370,.T.); +#458370 = EDGE_CURVE('',#458363,#458371,#458373,.T.); +#458371 = VERTEX_POINT('',#458372); +#458372 = CARTESIAN_POINT('',(130.586957,-139.884499,-7.5E-02)); +#458373 = LINE('',#458374,#458375); +#458374 = CARTESIAN_POINT('',(131.451229,-139.884499,-7.5E-02)); +#458375 = VECTOR('',#458376,1.); +#458376 = DIRECTION('',(-1.,0.,0.)); +#458377 = ORIENTED_EDGE('',*,*,#458378,.T.); +#458378 = EDGE_CURVE('',#458371,#458379,#458381,.T.); +#458379 = VERTEX_POINT('',#458380); +#458380 = CARTESIAN_POINT('',(130.586957,-139.596408,-7.5E-02)); +#458381 = LINE('',#458382,#458383); +#458382 = CARTESIAN_POINT('',(130.586957,-139.884499,-7.5E-02)); +#458383 = VECTOR('',#458384,1.); +#458384 = DIRECTION('',(0.,1.,0.)); +#458385 = ORIENTED_EDGE('',*,*,#458386,.T.); +#458386 = EDGE_CURVE('',#458379,#458387,#458389,.T.); +#458387 = VERTEX_POINT('',#458388); +#458388 = CARTESIAN_POINT('',(130.298866,-139.596408,-7.5E-02)); +#458389 = LINE('',#458390,#458391); +#458390 = CARTESIAN_POINT('',(130.586957,-139.596408,-7.5E-02)); +#458391 = VECTOR('',#458392,1.); +#458392 = DIRECTION('',(-1.,0.,0.)); +#458393 = ORIENTED_EDGE('',*,*,#458394,.T.); +#458394 = EDGE_CURVE('',#458387,#458395,#458397,.T.); +#458395 = VERTEX_POINT('',#458396); +#458396 = CARTESIAN_POINT('',(130.298866,-139.308317,-7.5E-02)); +#458397 = LINE('',#458398,#458399); +#458398 = CARTESIAN_POINT('',(130.298866,-139.596408,-7.5E-02)); +#458399 = VECTOR('',#458400,1.); +#458400 = DIRECTION('',(0.,1.,0.)); +#458401 = ORIENTED_EDGE('',*,*,#458402,.T.); +#458402 = EDGE_CURVE('',#458395,#458403,#458405,.T.); +#458403 = VERTEX_POINT('',#458404); +#458404 = CARTESIAN_POINT('',(131.163138,-139.308317,-7.5E-02)); +#458405 = LINE('',#458406,#458407); +#458406 = CARTESIAN_POINT('',(130.298866,-139.308317,-7.5E-02)); +#458407 = VECTOR('',#458408,1.); +#458408 = DIRECTION('',(1.,0.,0.)); +#458409 = ORIENTED_EDGE('',*,*,#458410,.T.); +#458410 = EDGE_CURVE('',#458403,#458411,#458413,.T.); +#458411 = VERTEX_POINT('',#458412); +#458412 = CARTESIAN_POINT('',(131.163138,-139.596408,-7.5E-02)); +#458413 = LINE('',#458414,#458415); +#458414 = CARTESIAN_POINT('',(131.163138,-139.308317,-7.5E-02)); +#458415 = VECTOR('',#458416,1.); +#458416 = DIRECTION('',(0.,-1.,0.)); +#458417 = ORIENTED_EDGE('',*,*,#458418,.T.); +#458418 = EDGE_CURVE('',#458411,#458355,#458419,.T.); +#458419 = LINE('',#458420,#458421); +#458420 = CARTESIAN_POINT('',(131.163138,-139.596408,-7.5E-02)); +#458421 = VECTOR('',#458422,1.); +#458422 = DIRECTION('',(1.,0.,0.)); +#458423 = ORIENTED_EDGE('',*,*,#458424,.T.); +#458424 = EDGE_CURVE('',#458355,#458425,#458427,.T.); +#458425 = VERTEX_POINT('',#458426); +#458426 = CARTESIAN_POINT('',(131.451229,-139.308317,-7.5E-02)); +#458427 = LINE('',#458428,#458429); +#458428 = CARTESIAN_POINT('',(131.451229,-139.596408,-7.5E-02)); +#458429 = VECTOR('',#458430,1.); +#458430 = DIRECTION('',(0.,1.,0.)); +#458431 = ORIENTED_EDGE('',*,*,#458432,.T.); +#458432 = EDGE_CURVE('',#458425,#458403,#458433,.T.); +#458433 = LINE('',#458434,#458435); +#458434 = CARTESIAN_POINT('',(131.451229,-139.308317,-7.5E-02)); +#458435 = VECTOR('',#458436,1.); +#458436 = DIRECTION('',(-1.,0.,0.)); +#458437 = ORIENTED_EDGE('',*,*,#458438,.T.); +#458438 = EDGE_CURVE('',#458403,#458439,#458441,.T.); +#458439 = VERTEX_POINT('',#458440); +#458440 = CARTESIAN_POINT('',(131.163138,-139.020227,-7.5E-02)); +#458441 = LINE('',#458442,#458443); +#458442 = CARTESIAN_POINT('',(131.163138,-139.308317,-7.5E-02)); +#458443 = VECTOR('',#458444,1.); +#458444 = DIRECTION('',(0.,1.,0.)); +#458445 = ORIENTED_EDGE('',*,*,#458446,.T.); +#458446 = EDGE_CURVE('',#458439,#458447,#458449,.T.); +#458447 = VERTEX_POINT('',#458448); +#458448 = CARTESIAN_POINT('',(130.010775,-139.020227,-7.5E-02)); +#458449 = LINE('',#458450,#458451); +#458450 = CARTESIAN_POINT('',(131.163138,-139.020227,-7.5E-02)); +#458451 = VECTOR('',#458452,1.); +#458452 = DIRECTION('',(-1.,0.,0.)); +#458453 = ORIENTED_EDGE('',*,*,#458454,.T.); +#458454 = EDGE_CURVE('',#458447,#458455,#458457,.T.); +#458455 = VERTEX_POINT('',#458456); +#458456 = CARTESIAN_POINT('',(130.010775,-139.884499,-7.5E-02)); +#458457 = LINE('',#458458,#458459); +#458458 = CARTESIAN_POINT('',(130.010775,-139.020227,-7.5E-02)); +#458459 = VECTOR('',#458460,1.); +#458460 = DIRECTION('',(0.,-1.,0.)); +#458461 = ORIENTED_EDGE('',*,*,#458462,.T.); +#458462 = EDGE_CURVE('',#458455,#458463,#458465,.T.); +#458463 = VERTEX_POINT('',#458464); +#458464 = CARTESIAN_POINT('',(130.298866,-139.884499,-7.5E-02)); +#458465 = LINE('',#458466,#458467); +#458466 = CARTESIAN_POINT('',(130.010775,-139.884499,-7.5E-02)); +#458467 = VECTOR('',#458468,1.); +#458468 = DIRECTION('',(1.,0.,0.)); +#458469 = ORIENTED_EDGE('',*,*,#458470,.T.); +#458470 = EDGE_CURVE('',#458463,#458471,#458473,.T.); +#458471 = VERTEX_POINT('',#458472); +#458472 = CARTESIAN_POINT('',(130.298866,-140.17259,-7.5E-02)); +#458473 = LINE('',#458474,#458475); +#458474 = CARTESIAN_POINT('',(130.298866,-139.884499,-7.5E-02)); +#458475 = VECTOR('',#458476,1.); +#458476 = DIRECTION('',(0.,-1.,0.)); +#458477 = ORIENTED_EDGE('',*,*,#458478,.T.); +#458478 = EDGE_CURVE('',#458471,#458479,#458481,.T.); +#458479 = VERTEX_POINT('',#458480); +#458480 = CARTESIAN_POINT('',(130.010775,-140.17259,-7.5E-02)); +#458481 = LINE('',#458482,#458483); +#458482 = CARTESIAN_POINT('',(130.298866,-140.17259,-7.5E-02)); +#458483 = VECTOR('',#458484,1.); +#458484 = DIRECTION('',(-1.,0.,0.)); +#458485 = ORIENTED_EDGE('',*,*,#458486,.T.); +#458486 = EDGE_CURVE('',#458479,#458487,#458489,.T.); +#458487 = VERTEX_POINT('',#458488); +#458488 = CARTESIAN_POINT('',(130.010775,-140.46068,-7.5E-02)); +#458489 = LINE('',#458490,#458491); +#458490 = CARTESIAN_POINT('',(130.010775,-140.17259,-7.5E-02)); +#458491 = VECTOR('',#458492,1.); +#458492 = DIRECTION('',(0.,-1.,0.)); +#458493 = ORIENTED_EDGE('',*,*,#458494,.T.); +#458494 = EDGE_CURVE('',#458487,#458495,#458497,.T.); +#458495 = VERTEX_POINT('',#458496); +#458496 = CARTESIAN_POINT('',(130.586957,-140.46068,-7.5E-02)); +#458497 = LINE('',#458498,#458499); +#458498 = CARTESIAN_POINT('',(130.010775,-140.46068,-7.5E-02)); +#458499 = VECTOR('',#458500,1.); +#458500 = DIRECTION('',(1.,0.,0.)); +#458501 = ORIENTED_EDGE('',*,*,#458502,.T.); +#458502 = EDGE_CURVE('',#458495,#458503,#458505,.T.); +#458503 = VERTEX_POINT('',#458504); +#458504 = CARTESIAN_POINT('',(130.586957,-140.748771,-7.5E-02)); +#458505 = LINE('',#458506,#458507); +#458506 = CARTESIAN_POINT('',(130.586957,-140.46068,-7.5E-02)); +#458507 = VECTOR('',#458508,1.); +#458508 = DIRECTION('',(0.,-1.,0.)); +#458509 = ORIENTED_EDGE('',*,*,#458510,.T.); +#458510 = EDGE_CURVE('',#458503,#458511,#458513,.T.); +#458511 = VERTEX_POINT('',#458512); +#458512 = CARTESIAN_POINT('',(130.010775,-140.748771,-7.5E-02)); +#458513 = LINE('',#458514,#458515); +#458514 = CARTESIAN_POINT('',(130.586957,-140.748771,-7.5E-02)); +#458515 = VECTOR('',#458516,1.); +#458516 = DIRECTION('',(-1.,0.,0.)); +#458517 = ORIENTED_EDGE('',*,*,#458518,.T.); +#458518 = EDGE_CURVE('',#458511,#458519,#458521,.T.); +#458519 = VERTEX_POINT('',#458520); +#458520 = CARTESIAN_POINT('',(130.010775,-141.036862,-7.5E-02)); +#458521 = LINE('',#458522,#458523); +#458522 = CARTESIAN_POINT('',(130.010775,-140.748771,-7.5E-02)); +#458523 = VECTOR('',#458524,1.); +#458524 = DIRECTION('',(0.,-1.,0.)); +#458525 = ORIENTED_EDGE('',*,*,#458526,.T.); +#458526 = EDGE_CURVE('',#458519,#458527,#458529,.T.); +#458527 = VERTEX_POINT('',#458528); +#458528 = CARTESIAN_POINT('',(130.586957,-141.036862,-7.5E-02)); +#458529 = LINE('',#458530,#458531); +#458530 = CARTESIAN_POINT('',(130.010775,-141.036862,-7.5E-02)); +#458531 = VECTOR('',#458532,1.); +#458532 = DIRECTION('',(1.,0.,0.)); +#458533 = ORIENTED_EDGE('',*,*,#458534,.T.); +#458534 = EDGE_CURVE('',#458527,#458503,#458535,.T.); +#458535 = LINE('',#458536,#458537); +#458536 = CARTESIAN_POINT('',(130.586957,-141.036862,-7.5E-02)); +#458537 = VECTOR('',#458538,1.); +#458538 = DIRECTION('',(0.,1.,0.)); +#458539 = ORIENTED_EDGE('',*,*,#458540,.T.); +#458540 = EDGE_CURVE('',#458503,#458541,#458543,.T.); +#458541 = VERTEX_POINT('',#458542); +#458542 = CARTESIAN_POINT('',(130.875047,-140.748771,-7.5E-02)); +#458543 = LINE('',#458544,#458545); +#458544 = CARTESIAN_POINT('',(130.586957,-140.748771,-7.5E-02)); +#458545 = VECTOR('',#458546,1.); +#458546 = DIRECTION('',(1.,0.,0.)); +#458547 = ORIENTED_EDGE('',*,*,#458548,.T.); +#458548 = EDGE_CURVE('',#458541,#458549,#458551,.T.); +#458549 = VERTEX_POINT('',#458550); +#458550 = CARTESIAN_POINT('',(130.875047,-140.17259,-7.5E-02)); +#458551 = LINE('',#458552,#458553); +#458552 = CARTESIAN_POINT('',(130.875047,-140.748771,-7.5E-02)); +#458553 = VECTOR('',#458554,1.); +#458554 = DIRECTION('',(0.,1.,0.)); +#458555 = ORIENTED_EDGE('',*,*,#458556,.T.); +#458556 = EDGE_CURVE('',#458549,#458557,#458559,.T.); +#458557 = VERTEX_POINT('',#458558); +#458558 = CARTESIAN_POINT('',(131.163138,-140.17259,-7.5E-02)); +#458559 = LINE('',#458560,#458561); +#458560 = CARTESIAN_POINT('',(130.875047,-140.17259,-7.5E-02)); +#458561 = VECTOR('',#458562,1.); +#458562 = DIRECTION('',(1.,0.,0.)); +#458563 = ORIENTED_EDGE('',*,*,#458564,.T.); +#458564 = EDGE_CURVE('',#458557,#458565,#458567,.T.); +#458565 = VERTEX_POINT('',#458566); +#458566 = CARTESIAN_POINT('',(131.163138,-140.46068,-7.5E-02)); +#458567 = LINE('',#458568,#458569); +#458568 = CARTESIAN_POINT('',(131.163138,-140.17259,-7.5E-02)); +#458569 = VECTOR('',#458570,1.); +#458570 = DIRECTION('',(0.,-1.,0.)); +#458571 = ORIENTED_EDGE('',*,*,#458572,.T.); +#458572 = EDGE_CURVE('',#458565,#458573,#458575,.T.); +#458573 = VERTEX_POINT('',#458574); +#458574 = CARTESIAN_POINT('',(131.451229,-140.46068,-7.5E-02)); +#458575 = LINE('',#458576,#458577); +#458576 = CARTESIAN_POINT('',(131.163138,-140.46068,-7.5E-02)); +#458577 = VECTOR('',#458578,1.); +#458578 = DIRECTION('',(1.,0.,0.)); +#458579 = ORIENTED_EDGE('',*,*,#458580,.T.); +#458580 = EDGE_CURVE('',#458573,#458363,#458581,.T.); +#458581 = LINE('',#458582,#458583); +#458582 = CARTESIAN_POINT('',(131.451229,-140.46068,-7.5E-02)); +#458583 = VECTOR('',#458584,1.); +#458584 = DIRECTION('',(0.,1.,0.)); +#458585 = ORIENTED_EDGE('',*,*,#458586,.T.); +#458586 = EDGE_CURVE('',#458363,#458339,#458587,.T.); +#458587 = LINE('',#458588,#458589); +#458588 = CARTESIAN_POINT('',(131.451229,-139.884499,-7.5E-02)); +#458589 = VECTOR('',#458590,1.); +#458590 = DIRECTION('',(1.,0.,0.)); +#458591 = ORIENTED_EDGE('',*,*,#458592,.T.); +#458592 = EDGE_CURVE('',#458339,#458593,#458595,.T.); +#458593 = VERTEX_POINT('',#458594); +#458594 = CARTESIAN_POINT('',(131.73932,-140.46068,-7.5E-02)); +#458595 = LINE('',#458596,#458597); +#458596 = CARTESIAN_POINT('',(131.73932,-139.884499,-7.5E-02)); +#458597 = VECTOR('',#458598,1.); +#458598 = DIRECTION('',(0.,-1.,0.)); +#458599 = ORIENTED_EDGE('',*,*,#458600,.T.); +#458600 = EDGE_CURVE('',#458593,#458601,#458603,.T.); +#458601 = VERTEX_POINT('',#458602); +#458602 = CARTESIAN_POINT('',(132.02741,-140.46068,-7.5E-02)); +#458603 = LINE('',#458604,#458605); +#458604 = CARTESIAN_POINT('',(131.73932,-140.46068,-7.5E-02)); +#458605 = VECTOR('',#458606,1.); +#458606 = DIRECTION('',(1.,0.,0.)); +#458607 = ORIENTED_EDGE('',*,*,#458608,.T.); +#458608 = EDGE_CURVE('',#458601,#458609,#458611,.T.); +#458609 = VERTEX_POINT('',#458610); +#458610 = CARTESIAN_POINT('',(132.02741,-141.324953,-7.5E-02)); +#458611 = LINE('',#458612,#458613); +#458612 = CARTESIAN_POINT('',(132.02741,-140.46068,-7.5E-02)); +#458613 = VECTOR('',#458614,1.); +#458614 = DIRECTION('',(0.,-1.,0.)); +#458615 = ORIENTED_EDGE('',*,*,#458616,.T.); +#458616 = EDGE_CURVE('',#458609,#458617,#458619,.T.); +#458617 = VERTEX_POINT('',#458618); +#458618 = CARTESIAN_POINT('',(131.73932,-141.324953,-7.5E-02)); +#458619 = LINE('',#458620,#458621); +#458620 = CARTESIAN_POINT('',(132.02741,-141.324953,-7.5E-02)); +#458621 = VECTOR('',#458622,1.); +#458622 = DIRECTION('',(-1.,0.,0.)); +#458623 = ORIENTED_EDGE('',*,*,#458624,.T.); +#458624 = EDGE_CURVE('',#458617,#458625,#458627,.T.); +#458625 = VERTEX_POINT('',#458626); +#458626 = CARTESIAN_POINT('',(131.73932,-140.748771,-7.5E-02)); +#458627 = LINE('',#458628,#458629); +#458628 = CARTESIAN_POINT('',(131.73932,-141.324953,-7.5E-02)); +#458629 = VECTOR('',#458630,1.); +#458630 = DIRECTION('',(0.,1.,0.)); +#458631 = ORIENTED_EDGE('',*,*,#458632,.T.); +#458632 = EDGE_CURVE('',#458625,#458541,#458633,.T.); +#458633 = LINE('',#458634,#458635); +#458634 = CARTESIAN_POINT('',(131.73932,-140.748771,-7.5E-02)); +#458635 = VECTOR('',#458636,1.); +#458636 = DIRECTION('',(-1.,0.,0.)); +#458637 = ORIENTED_EDGE('',*,*,#458638,.T.); +#458638 = EDGE_CURVE('',#458541,#458639,#458641,.T.); +#458639 = VERTEX_POINT('',#458640); +#458640 = CARTESIAN_POINT('',(130.875047,-141.036862,-7.5E-02)); +#458641 = LINE('',#458642,#458643); +#458642 = CARTESIAN_POINT('',(130.875047,-140.748771,-7.5E-02)); +#458643 = VECTOR('',#458644,1.); +#458644 = DIRECTION('',(0.,-1.,0.)); +#458645 = ORIENTED_EDGE('',*,*,#458646,.T.); +#458646 = EDGE_CURVE('',#458639,#458647,#458649,.T.); +#458647 = VERTEX_POINT('',#458648); +#458648 = CARTESIAN_POINT('',(131.451229,-141.036862,-7.5E-02)); +#458649 = LINE('',#458650,#458651); +#458650 = CARTESIAN_POINT('',(130.875047,-141.036862,-7.5E-02)); +#458651 = VECTOR('',#458652,1.); +#458652 = DIRECTION('',(1.,0.,0.)); +#458653 = ORIENTED_EDGE('',*,*,#458654,.T.); +#458654 = EDGE_CURVE('',#458647,#458655,#458657,.T.); +#458655 = VERTEX_POINT('',#458656); +#458656 = CARTESIAN_POINT('',(131.451229,-141.613043,-7.5E-02)); +#458657 = LINE('',#458658,#458659); +#458658 = CARTESIAN_POINT('',(131.451229,-141.036862,-7.5E-02)); +#458659 = VECTOR('',#458660,1.); +#458660 = DIRECTION('',(0.,-1.,0.)); +#458661 = ORIENTED_EDGE('',*,*,#458662,.T.); +#458662 = EDGE_CURVE('',#458655,#458663,#458665,.T.); +#458663 = VERTEX_POINT('',#458664); +#458664 = CARTESIAN_POINT('',(131.163138,-141.613043,-7.5E-02)); +#458665 = LINE('',#458666,#458667); +#458666 = CARTESIAN_POINT('',(131.451229,-141.613043,-7.5E-02)); +#458667 = VECTOR('',#458668,1.); +#458668 = DIRECTION('',(-1.,0.,0.)); +#458669 = ORIENTED_EDGE('',*,*,#458670,.T.); +#458670 = EDGE_CURVE('',#458663,#458671,#458673,.T.); +#458671 = VERTEX_POINT('',#458672); +#458672 = CARTESIAN_POINT('',(131.163138,-141.901134,-7.5E-02)); +#458673 = LINE('',#458674,#458675); +#458674 = CARTESIAN_POINT('',(131.163138,-141.613043,-7.5E-02)); +#458675 = VECTOR('',#458676,1.); +#458676 = DIRECTION('',(0.,-1.,0.)); +#458677 = ORIENTED_EDGE('',*,*,#458678,.T.); +#458678 = EDGE_CURVE('',#458671,#458679,#458681,.T.); +#458679 = VERTEX_POINT('',#458680); +#458680 = CARTESIAN_POINT('',(131.451229,-141.901134,-7.5E-02)); +#458681 = LINE('',#458682,#458683); +#458682 = CARTESIAN_POINT('',(131.163138,-141.901134,-7.5E-02)); +#458683 = VECTOR('',#458684,1.); +#458684 = DIRECTION('',(1.,0.,0.)); +#458685 = ORIENTED_EDGE('',*,*,#458686,.T.); +#458686 = EDGE_CURVE('',#458679,#458655,#458687,.T.); +#458687 = LINE('',#458688,#458689); +#458688 = CARTESIAN_POINT('',(131.451229,-141.901134,-7.5E-02)); +#458689 = VECTOR('',#458690,1.); +#458690 = DIRECTION('',(0.,1.,0.)); +#458691 = ORIENTED_EDGE('',*,*,#458692,.T.); +#458692 = EDGE_CURVE('',#458655,#458693,#458695,.T.); +#458693 = VERTEX_POINT('',#458694); +#458694 = CARTESIAN_POINT('',(132.315501,-141.613043,-7.5E-02)); +#458695 = LINE('',#458696,#458697); +#458696 = CARTESIAN_POINT('',(131.451229,-141.613043,-7.5E-02)); +#458697 = VECTOR('',#458698,1.); +#458698 = DIRECTION('',(1.,0.,0.)); +#458699 = ORIENTED_EDGE('',*,*,#458700,.T.); +#458700 = EDGE_CURVE('',#458693,#458701,#458703,.T.); +#458701 = VERTEX_POINT('',#458702); +#458702 = CARTESIAN_POINT('',(132.315501,-141.901134,-7.5E-02)); +#458703 = LINE('',#458704,#458705); +#458704 = CARTESIAN_POINT('',(132.315501,-141.613043,-7.5E-02)); +#458705 = VECTOR('',#458706,1.); +#458706 = DIRECTION('',(0.,-1.,0.)); +#458707 = ORIENTED_EDGE('',*,*,#458708,.T.); +#458708 = EDGE_CURVE('',#458701,#458709,#458711,.T.); +#458709 = VERTEX_POINT('',#458710); +#458710 = CARTESIAN_POINT('',(132.603592,-141.901134,-7.5E-02)); +#458711 = LINE('',#458712,#458713); +#458712 = CARTESIAN_POINT('',(132.315501,-141.901134,-7.5E-02)); +#458713 = VECTOR('',#458714,1.); +#458714 = DIRECTION('',(1.,0.,0.)); +#458715 = ORIENTED_EDGE('',*,*,#458716,.T.); +#458716 = EDGE_CURVE('',#458709,#458717,#458719,.T.); +#458717 = VERTEX_POINT('',#458718); +#458718 = CARTESIAN_POINT('',(132.603592,-141.613043,-7.5E-02)); +#458719 = LINE('',#458720,#458721); +#458720 = CARTESIAN_POINT('',(132.603592,-141.901134,-7.5E-02)); +#458721 = VECTOR('',#458722,1.); +#458722 = DIRECTION('',(0.,1.,0.)); +#458723 = ORIENTED_EDGE('',*,*,#458724,.T.); +#458724 = EDGE_CURVE('',#458717,#458725,#458727,.T.); +#458725 = VERTEX_POINT('',#458726); +#458726 = CARTESIAN_POINT('',(132.891683,-141.613043,-7.5E-02)); +#458727 = LINE('',#458728,#458729); +#458728 = CARTESIAN_POINT('',(132.603592,-141.613043,-7.5E-02)); +#458729 = VECTOR('',#458730,1.); +#458730 = DIRECTION('',(1.,0.,0.)); +#458731 = ORIENTED_EDGE('',*,*,#458732,.T.); +#458732 = EDGE_CURVE('',#458725,#458733,#458735,.T.); +#458733 = VERTEX_POINT('',#458734); +#458734 = CARTESIAN_POINT('',(132.891683,-141.324953,-7.5E-02)); +#458735 = LINE('',#458736,#458737); +#458736 = CARTESIAN_POINT('',(132.891683,-141.613043,-7.5E-02)); +#458737 = VECTOR('',#458738,1.); +#458738 = DIRECTION('',(0.,1.,0.)); +#458739 = ORIENTED_EDGE('',*,*,#458740,.T.); +#458740 = EDGE_CURVE('',#458733,#458741,#458743,.T.); +#458741 = VERTEX_POINT('',#458742); +#458742 = CARTESIAN_POINT('',(134.044046,-141.324953,-7.5E-02)); +#458743 = LINE('',#458744,#458745); +#458744 = CARTESIAN_POINT('',(132.891683,-141.324953,-7.5E-02)); +#458745 = VECTOR('',#458746,1.); +#458746 = DIRECTION('',(1.,0.,0.)); +#458747 = ORIENTED_EDGE('',*,*,#458748,.T.); +#458748 = EDGE_CURVE('',#458741,#458749,#458751,.T.); +#458749 = VERTEX_POINT('',#458750); +#458750 = CARTESIAN_POINT('',(134.044046,-141.036862,-7.5E-02)); +#458751 = LINE('',#458752,#458753); +#458752 = CARTESIAN_POINT('',(134.044046,-141.324953,-7.5E-02)); +#458753 = VECTOR('',#458754,1.); +#458754 = DIRECTION('',(0.,1.,0.)); +#458755 = ORIENTED_EDGE('',*,*,#458756,.T.); +#458756 = EDGE_CURVE('',#458749,#458757,#458759,.T.); +#458757 = VERTEX_POINT('',#458758); +#458758 = CARTESIAN_POINT('',(134.332136,-141.036862,-7.5E-02)); +#458759 = LINE('',#458760,#458761); +#458760 = CARTESIAN_POINT('',(134.044046,-141.036862,-7.5E-02)); +#458761 = VECTOR('',#458762,1.); +#458762 = DIRECTION('',(1.,0.,0.)); +#458763 = ORIENTED_EDGE('',*,*,#458764,.T.); +#458764 = EDGE_CURVE('',#458757,#458765,#458767,.T.); +#458765 = VERTEX_POINT('',#458766); +#458766 = CARTESIAN_POINT('',(134.332136,-141.324953,-7.5E-02)); +#458767 = LINE('',#458768,#458769); +#458768 = CARTESIAN_POINT('',(134.332136,-141.036862,-7.5E-02)); +#458769 = VECTOR('',#458770,1.); +#458770 = DIRECTION('',(0.,-1.,0.)); +#458771 = ORIENTED_EDGE('',*,*,#458772,.T.); +#458772 = EDGE_CURVE('',#458765,#458773,#458775,.T.); +#458773 = VERTEX_POINT('',#458774); +#458774 = CARTESIAN_POINT('',(134.620227,-141.324953,-7.5E-02)); +#458775 = LINE('',#458776,#458777); +#458776 = CARTESIAN_POINT('',(134.332136,-141.324953,-7.5E-02)); +#458777 = VECTOR('',#458778,1.); +#458778 = DIRECTION('',(1.,0.,0.)); +#458779 = ORIENTED_EDGE('',*,*,#458780,.T.); +#458780 = EDGE_CURVE('',#458773,#458781,#458783,.T.); +#458781 = VERTEX_POINT('',#458782); +#458782 = CARTESIAN_POINT('',(134.620227,-141.036862,-7.5E-02)); +#458783 = LINE('',#458784,#458785); +#458784 = CARTESIAN_POINT('',(134.620227,-141.324953,-7.5E-02)); +#458785 = VECTOR('',#458786,1.); +#458786 = DIRECTION('',(0.,1.,0.)); +#458787 = ORIENTED_EDGE('',*,*,#458788,.T.); +#458788 = EDGE_CURVE('',#458781,#458789,#458791,.T.); +#458789 = VERTEX_POINT('',#458790); +#458790 = CARTESIAN_POINT('',(134.908318,-141.036862,-7.5E-02)); +#458791 = LINE('',#458792,#458793); +#458792 = CARTESIAN_POINT('',(134.620227,-141.036862,-7.5E-02)); +#458793 = VECTOR('',#458794,1.); +#458794 = DIRECTION('',(1.,0.,0.)); +#458795 = ORIENTED_EDGE('',*,*,#458796,.T.); +#458796 = EDGE_CURVE('',#458789,#458797,#458799,.T.); +#458797 = VERTEX_POINT('',#458798); +#458798 = CARTESIAN_POINT('',(134.908318,-141.324953,-7.5E-02)); +#458799 = LINE('',#458800,#458801); +#458800 = CARTESIAN_POINT('',(134.908318,-141.036862,-7.5E-02)); +#458801 = VECTOR('',#458802,1.); +#458802 = DIRECTION('',(0.,-1.,0.)); +#458803 = ORIENTED_EDGE('',*,*,#458804,.T.); +#458804 = EDGE_CURVE('',#458797,#458805,#458807,.T.); +#458805 = VERTEX_POINT('',#458806); +#458806 = CARTESIAN_POINT('',(135.196408,-141.324953,-7.5E-02)); +#458807 = LINE('',#458808,#458809); +#458808 = CARTESIAN_POINT('',(134.908318,-141.324953,-7.5E-02)); +#458809 = VECTOR('',#458810,1.); +#458810 = DIRECTION('',(1.,0.,0.)); +#458811 = ORIENTED_EDGE('',*,*,#458812,.T.); +#458812 = EDGE_CURVE('',#458805,#458813,#458815,.T.); +#458813 = VERTEX_POINT('',#458814); +#458814 = CARTESIAN_POINT('',(135.196408,-141.036862,-7.5E-02)); +#458815 = LINE('',#458816,#458817); +#458816 = CARTESIAN_POINT('',(135.196408,-141.324953,-7.5E-02)); +#458817 = VECTOR('',#458818,1.); +#458818 = DIRECTION('',(0.,1.,0.)); +#458819 = ORIENTED_EDGE('',*,*,#458820,.T.); +#458820 = EDGE_CURVE('',#458813,#458821,#458823,.T.); +#458821 = VERTEX_POINT('',#458822); +#458822 = CARTESIAN_POINT('',(135.484499,-141.036862,-7.5E-02)); +#458823 = LINE('',#458824,#458825); +#458824 = CARTESIAN_POINT('',(135.196408,-141.036862,-7.5E-02)); +#458825 = VECTOR('',#458826,1.); +#458826 = DIRECTION('',(1.,0.,0.)); +#458827 = ORIENTED_EDGE('',*,*,#458828,.T.); +#458828 = EDGE_CURVE('',#458821,#458829,#458831,.T.); +#458829 = VERTEX_POINT('',#458830); +#458830 = CARTESIAN_POINT('',(135.484499,-141.324953,-7.5E-02)); +#458831 = LINE('',#458832,#458833); +#458832 = CARTESIAN_POINT('',(135.484499,-141.036862,-7.5E-02)); +#458833 = VECTOR('',#458834,1.); +#458834 = DIRECTION('',(0.,-1.,0.)); +#458835 = ORIENTED_EDGE('',*,*,#458836,.T.); +#458836 = EDGE_CURVE('',#458829,#458837,#458839,.T.); +#458837 = VERTEX_POINT('',#458838); +#458838 = CARTESIAN_POINT('',(135.77259,-141.324953,-7.5E-02)); +#458839 = LINE('',#458840,#458841); +#458840 = CARTESIAN_POINT('',(135.484499,-141.324953,-7.5E-02)); +#458841 = VECTOR('',#458842,1.); +#458842 = DIRECTION('',(1.,0.,0.)); +#458843 = ORIENTED_EDGE('',*,*,#458844,.T.); +#458844 = EDGE_CURVE('',#458837,#458845,#458847,.T.); +#458845 = VERTEX_POINT('',#458846); +#458846 = CARTESIAN_POINT('',(135.77259,-141.613043,-7.5E-02)); +#458847 = LINE('',#458848,#458849); +#458848 = CARTESIAN_POINT('',(135.77259,-141.324953,-7.5E-02)); +#458849 = VECTOR('',#458850,1.); +#458850 = DIRECTION('',(0.,-1.,0.)); +#458851 = ORIENTED_EDGE('',*,*,#458852,.T.); +#458852 = EDGE_CURVE('',#458845,#458853,#458855,.T.); +#458853 = VERTEX_POINT('',#458854); +#458854 = CARTESIAN_POINT('',(136.348771,-141.613043,-7.5E-02)); +#458855 = LINE('',#458856,#458857); +#458856 = CARTESIAN_POINT('',(135.77259,-141.613043,-7.5E-02)); +#458857 = VECTOR('',#458858,1.); +#458858 = DIRECTION('',(1.,0.,0.)); +#458859 = ORIENTED_EDGE('',*,*,#458860,.T.); +#458860 = EDGE_CURVE('',#458853,#458861,#458863,.T.); +#458861 = VERTEX_POINT('',#458862); +#458862 = CARTESIAN_POINT('',(136.348771,-141.324953,-7.5E-02)); +#458863 = LINE('',#458864,#458865); +#458864 = CARTESIAN_POINT('',(136.348771,-141.613043,-7.5E-02)); +#458865 = VECTOR('',#458866,1.); +#458866 = DIRECTION('',(0.,1.,0.)); +#458867 = ORIENTED_EDGE('',*,*,#458868,.T.); +#458868 = EDGE_CURVE('',#458861,#458869,#458871,.T.); +#458869 = VERTEX_POINT('',#458870); +#458870 = CARTESIAN_POINT('',(136.636862,-141.324953,-7.5E-02)); +#458871 = LINE('',#458872,#458873); +#458872 = CARTESIAN_POINT('',(136.348771,-141.324953,-7.5E-02)); +#458873 = VECTOR('',#458874,1.); +#458874 = DIRECTION('',(1.,0.,0.)); +#458875 = ORIENTED_EDGE('',*,*,#458876,.T.); +#458876 = EDGE_CURVE('',#458869,#458877,#458879,.T.); +#458877 = VERTEX_POINT('',#458878); +#458878 = CARTESIAN_POINT('',(136.636862,-141.613043,-7.5E-02)); +#458879 = LINE('',#458880,#458881); +#458880 = CARTESIAN_POINT('',(136.636862,-141.324953,-7.5E-02)); +#458881 = VECTOR('',#458882,1.); +#458882 = DIRECTION('',(0.,-1.,0.)); +#458883 = ORIENTED_EDGE('',*,*,#458884,.T.); +#458884 = EDGE_CURVE('',#458877,#458853,#458885,.T.); +#458885 = LINE('',#458886,#458887); +#458886 = CARTESIAN_POINT('',(136.636862,-141.613043,-7.5E-02)); +#458887 = VECTOR('',#458888,1.); +#458888 = DIRECTION('',(-1.,0.,0.)); +#458889 = ORIENTED_EDGE('',*,*,#458890,.T.); +#458890 = EDGE_CURVE('',#458853,#458891,#458893,.T.); +#458891 = VERTEX_POINT('',#458892); +#458892 = CARTESIAN_POINT('',(136.348771,-141.901134,-7.5E-02)); +#458893 = LINE('',#458894,#458895); +#458894 = CARTESIAN_POINT('',(136.348771,-141.613043,-7.5E-02)); +#458895 = VECTOR('',#458896,1.); +#458896 = DIRECTION('',(0.,-1.,0.)); +#458897 = ORIENTED_EDGE('',*,*,#458898,.T.); +#458898 = EDGE_CURVE('',#458891,#458899,#458901,.T.); +#458899 = VERTEX_POINT('',#458900); +#458900 = CARTESIAN_POINT('',(135.484499,-141.901134,-7.5E-02)); +#458901 = LINE('',#458902,#458903); +#458902 = CARTESIAN_POINT('',(136.348771,-141.901134,-7.5E-02)); +#458903 = VECTOR('',#458904,1.); +#458904 = DIRECTION('',(-1.,0.,0.)); +#458905 = ORIENTED_EDGE('',*,*,#458906,.T.); +#458906 = EDGE_CURVE('',#458899,#458907,#458909,.T.); +#458907 = VERTEX_POINT('',#458908); +#458908 = CARTESIAN_POINT('',(135.484499,-141.613043,-7.5E-02)); +#458909 = LINE('',#458910,#458911); +#458910 = CARTESIAN_POINT('',(135.484499,-141.901134,-7.5E-02)); +#458911 = VECTOR('',#458912,1.); +#458912 = DIRECTION('',(0.,1.,0.)); +#458913 = ORIENTED_EDGE('',*,*,#458914,.T.); +#458914 = EDGE_CURVE('',#458907,#458915,#458917,.T.); +#458915 = VERTEX_POINT('',#458916); +#458916 = CARTESIAN_POINT('',(134.620227,-141.613043,-7.5E-02)); +#458917 = LINE('',#458918,#458919); +#458918 = CARTESIAN_POINT('',(135.484499,-141.613043,-7.5E-02)); +#458919 = VECTOR('',#458920,1.); +#458920 = DIRECTION('',(-1.,0.,0.)); +#458921 = ORIENTED_EDGE('',*,*,#458922,.T.); +#458922 = EDGE_CURVE('',#458915,#458923,#458925,.T.); +#458923 = VERTEX_POINT('',#458924); +#458924 = CARTESIAN_POINT('',(134.620227,-141.901134,-7.5E-02)); +#458925 = LINE('',#458926,#458927); +#458926 = CARTESIAN_POINT('',(134.620227,-141.613043,-7.5E-02)); +#458927 = VECTOR('',#458928,1.); +#458928 = DIRECTION('',(0.,-1.,0.)); +#458929 = ORIENTED_EDGE('',*,*,#458930,.T.); +#458930 = EDGE_CURVE('',#458923,#458931,#458933,.T.); +#458931 = VERTEX_POINT('',#458932); +#458932 = CARTESIAN_POINT('',(134.332136,-141.901134,-7.5E-02)); +#458933 = LINE('',#458934,#458935); +#458934 = CARTESIAN_POINT('',(134.620227,-141.901134,-7.5E-02)); +#458935 = VECTOR('',#458936,1.); +#458936 = DIRECTION('',(-1.,0.,0.)); +#458937 = ORIENTED_EDGE('',*,*,#458938,.T.); +#458938 = EDGE_CURVE('',#458931,#458939,#458941,.T.); +#458939 = VERTEX_POINT('',#458940); +#458940 = CARTESIAN_POINT('',(134.332136,-141.613043,-7.5E-02)); +#458941 = LINE('',#458942,#458943); +#458942 = CARTESIAN_POINT('',(134.332136,-141.901134,-7.5E-02)); +#458943 = VECTOR('',#458944,1.); +#458944 = DIRECTION('',(0.,1.,0.)); +#458945 = ORIENTED_EDGE('',*,*,#458946,.T.); +#458946 = EDGE_CURVE('',#458939,#458947,#458949,.T.); +#458947 = VERTEX_POINT('',#458948); +#458948 = CARTESIAN_POINT('',(133.467864,-141.613043,-7.5E-02)); +#458949 = LINE('',#458950,#458951); +#458950 = CARTESIAN_POINT('',(134.332136,-141.613043,-7.5E-02)); +#458951 = VECTOR('',#458952,1.); +#458952 = DIRECTION('',(-1.,0.,0.)); +#458953 = ORIENTED_EDGE('',*,*,#458954,.T.); +#458954 = EDGE_CURVE('',#458947,#458955,#458957,.T.); +#458955 = VERTEX_POINT('',#458956); +#458956 = CARTESIAN_POINT('',(133.467864,-141.901134,-7.5E-02)); +#458957 = LINE('',#458958,#458959); +#458958 = CARTESIAN_POINT('',(133.467864,-141.613043,-7.5E-02)); +#458959 = VECTOR('',#458960,1.); +#458960 = DIRECTION('',(0.,-1.,0.)); +#458961 = ORIENTED_EDGE('',*,*,#458962,.T.); +#458962 = EDGE_CURVE('',#458955,#458963,#458965,.T.); +#458963 = VERTEX_POINT('',#458964); +#458964 = CARTESIAN_POINT('',(134.044046,-141.901134,-7.5E-02)); +#458965 = LINE('',#458966,#458967); +#458966 = CARTESIAN_POINT('',(133.467864,-141.901134,-7.5E-02)); +#458967 = VECTOR('',#458968,1.); +#458968 = DIRECTION('',(1.,0.,0.)); +#458969 = ORIENTED_EDGE('',*,*,#458970,.T.); +#458970 = EDGE_CURVE('',#458963,#458971,#458973,.T.); +#458971 = VERTEX_POINT('',#458972); +#458972 = CARTESIAN_POINT('',(134.044046,-142.189225,-7.5E-02)); +#458973 = LINE('',#458974,#458975); +#458974 = CARTESIAN_POINT('',(134.044046,-141.901134,-7.5E-02)); +#458975 = VECTOR('',#458976,1.); +#458976 = DIRECTION('',(0.,-1.,0.)); +#458977 = ORIENTED_EDGE('',*,*,#458978,.T.); +#458978 = EDGE_CURVE('',#458971,#458979,#458981,.T.); +#458979 = VERTEX_POINT('',#458980); +#458980 = CARTESIAN_POINT('',(133.755955,-142.189225,-7.5E-02)); +#458981 = LINE('',#458982,#458983); +#458982 = CARTESIAN_POINT('',(134.044046,-142.189225,-7.5E-02)); +#458983 = VECTOR('',#458984,1.); +#458984 = DIRECTION('',(-1.,0.,0.)); +#458985 = ORIENTED_EDGE('',*,*,#458986,.T.); +#458986 = EDGE_CURVE('',#458979,#458987,#458989,.T.); +#458987 = VERTEX_POINT('',#458988); +#458988 = CARTESIAN_POINT('',(133.755955,-142.477316,-7.5E-02)); +#458989 = LINE('',#458990,#458991); +#458990 = CARTESIAN_POINT('',(133.755955,-142.189225,-7.5E-02)); +#458991 = VECTOR('',#458992,1.); +#458992 = DIRECTION('',(0.,-1.,0.)); +#458993 = ORIENTED_EDGE('',*,*,#458994,.T.); +#458994 = EDGE_CURVE('',#458987,#458995,#458997,.T.); +#458995 = VERTEX_POINT('',#458996); +#458996 = CARTESIAN_POINT('',(133.467864,-142.477316,-7.5E-02)); +#458997 = LINE('',#458998,#458999); +#458998 = CARTESIAN_POINT('',(133.755955,-142.477316,-7.5E-02)); +#458999 = VECTOR('',#459000,1.); +#459000 = DIRECTION('',(-1.,0.,0.)); +#459001 = ORIENTED_EDGE('',*,*,#459002,.T.); +#459002 = EDGE_CURVE('',#458995,#459003,#459005,.T.); +#459003 = VERTEX_POINT('',#459004); +#459004 = CARTESIAN_POINT('',(133.467864,-143.053497,-7.5E-02)); +#459005 = LINE('',#459006,#459007); +#459006 = CARTESIAN_POINT('',(133.467864,-142.477316,-7.5E-02)); +#459007 = VECTOR('',#459008,1.); +#459008 = DIRECTION('',(0.,-1.,0.)); +#459009 = ORIENTED_EDGE('',*,*,#459010,.T.); +#459010 = EDGE_CURVE('',#459003,#459011,#459013,.T.); +#459011 = VERTEX_POINT('',#459012); +#459012 = CARTESIAN_POINT('',(132.891683,-143.053497,-7.5E-02)); +#459013 = LINE('',#459014,#459015); +#459014 = CARTESIAN_POINT('',(133.467864,-143.053497,-7.5E-02)); +#459015 = VECTOR('',#459016,1.); +#459016 = DIRECTION('',(-1.,0.,0.)); +#459017 = ORIENTED_EDGE('',*,*,#459018,.T.); +#459018 = EDGE_CURVE('',#459011,#459019,#459021,.T.); +#459019 = VERTEX_POINT('',#459020); +#459020 = CARTESIAN_POINT('',(132.891683,-143.629678,-7.5E-02)); +#459021 = LINE('',#459022,#459023); +#459022 = CARTESIAN_POINT('',(132.891683,-143.053497,-7.5E-02)); +#459023 = VECTOR('',#459024,1.); +#459024 = DIRECTION('',(0.,-1.,0.)); +#459025 = ORIENTED_EDGE('',*,*,#459026,.T.); +#459026 = EDGE_CURVE('',#459019,#459027,#459029,.T.); +#459027 = VERTEX_POINT('',#459028); +#459028 = CARTESIAN_POINT('',(132.603592,-143.629678,-7.5E-02)); +#459029 = LINE('',#459030,#459031); +#459030 = CARTESIAN_POINT('',(132.891683,-143.629678,-7.5E-02)); +#459031 = VECTOR('',#459032,1.); +#459032 = DIRECTION('',(-1.,0.,0.)); +#459033 = ORIENTED_EDGE('',*,*,#459034,.T.); +#459034 = EDGE_CURVE('',#459027,#459035,#459037,.T.); +#459035 = VERTEX_POINT('',#459036); +#459036 = CARTESIAN_POINT('',(132.603592,-143.341588,-7.5E-02)); +#459037 = LINE('',#459038,#459039); +#459038 = CARTESIAN_POINT('',(132.603592,-143.629678,-7.5E-02)); +#459039 = VECTOR('',#459040,1.); +#459040 = DIRECTION('',(0.,1.,0.)); +#459041 = ORIENTED_EDGE('',*,*,#459042,.T.); +#459042 = EDGE_CURVE('',#459035,#459043,#459045,.T.); +#459043 = VERTEX_POINT('',#459044); +#459044 = CARTESIAN_POINT('',(132.02741,-143.341588,-7.5E-02)); +#459045 = LINE('',#459046,#459047); +#459046 = CARTESIAN_POINT('',(132.603592,-143.341588,-7.5E-02)); +#459047 = VECTOR('',#459048,1.); +#459048 = DIRECTION('',(-1.,0.,0.)); +#459049 = ORIENTED_EDGE('',*,*,#459050,.T.); +#459050 = EDGE_CURVE('',#459043,#459051,#459053,.T.); +#459051 = VERTEX_POINT('',#459052); +#459052 = CARTESIAN_POINT('',(132.02741,-143.053497,-7.5E-02)); +#459053 = LINE('',#459054,#459055); +#459054 = CARTESIAN_POINT('',(132.02741,-143.341588,-7.5E-02)); +#459055 = VECTOR('',#459056,1.); +#459056 = DIRECTION('',(0.,1.,0.)); +#459057 = ORIENTED_EDGE('',*,*,#459058,.T.); +#459058 = EDGE_CURVE('',#459051,#459059,#459061,.T.); +#459059 = VERTEX_POINT('',#459060); +#459060 = CARTESIAN_POINT('',(131.73932,-143.053497,-7.5E-02)); +#459061 = LINE('',#459062,#459063); +#459062 = CARTESIAN_POINT('',(132.02741,-143.053497,-7.5E-02)); +#459063 = VECTOR('',#459064,1.); +#459064 = DIRECTION('',(-1.,0.,0.)); +#459065 = ORIENTED_EDGE('',*,*,#459066,.T.); +#459066 = EDGE_CURVE('',#459059,#459067,#459069,.T.); +#459067 = VERTEX_POINT('',#459068); +#459068 = CARTESIAN_POINT('',(131.73932,-143.629678,-7.5E-02)); +#459069 = LINE('',#459070,#459071); +#459070 = CARTESIAN_POINT('',(131.73932,-143.053497,-7.5E-02)); +#459071 = VECTOR('',#459072,1.); +#459072 = DIRECTION('',(0.,-1.,0.)); +#459073 = ORIENTED_EDGE('',*,*,#459074,.T.); +#459074 = EDGE_CURVE('',#459067,#459075,#459077,.T.); +#459075 = VERTEX_POINT('',#459076); +#459076 = CARTESIAN_POINT('',(131.451229,-143.629678,-7.5E-02)); +#459077 = LINE('',#459078,#459079); +#459078 = CARTESIAN_POINT('',(131.73932,-143.629678,-7.5E-02)); +#459079 = VECTOR('',#459080,1.); +#459080 = DIRECTION('',(-1.,0.,0.)); +#459081 = ORIENTED_EDGE('',*,*,#459082,.T.); +#459082 = EDGE_CURVE('',#459075,#459083,#459085,.T.); +#459083 = VERTEX_POINT('',#459084); +#459084 = CARTESIAN_POINT('',(131.451229,-143.341588,-7.5E-02)); +#459085 = LINE('',#459086,#459087); +#459086 = CARTESIAN_POINT('',(131.451229,-143.629678,-7.5E-02)); +#459087 = VECTOR('',#459088,1.); +#459088 = DIRECTION('',(0.,1.,0.)); +#459089 = ORIENTED_EDGE('',*,*,#459090,.T.); +#459090 = EDGE_CURVE('',#459083,#459091,#459093,.T.); +#459091 = VERTEX_POINT('',#459092); +#459092 = CARTESIAN_POINT('',(131.163138,-143.341588,-7.5E-02)); +#459093 = LINE('',#459094,#459095); +#459094 = CARTESIAN_POINT('',(131.451229,-143.341588,-7.5E-02)); +#459095 = VECTOR('',#459096,1.); +#459096 = DIRECTION('',(-1.,0.,0.)); +#459097 = ORIENTED_EDGE('',*,*,#459098,.T.); +#459098 = EDGE_CURVE('',#459091,#459099,#459101,.T.); +#459099 = VERTEX_POINT('',#459100); +#459100 = CARTESIAN_POINT('',(131.163138,-143.629678,-7.5E-02)); +#459101 = LINE('',#459102,#459103); +#459102 = CARTESIAN_POINT('',(131.163138,-143.341588,-7.5E-02)); +#459103 = VECTOR('',#459104,1.); +#459104 = DIRECTION('',(0.,-1.,0.)); +#459105 = ORIENTED_EDGE('',*,*,#459106,.T.); +#459106 = EDGE_CURVE('',#459099,#459107,#459109,.T.); +#459107 = VERTEX_POINT('',#459108); +#459108 = CARTESIAN_POINT('',(130.875047,-143.629678,-7.5E-02)); +#459109 = LINE('',#459110,#459111); +#459110 = CARTESIAN_POINT('',(131.163138,-143.629678,-7.5E-02)); +#459111 = VECTOR('',#459112,1.); +#459112 = DIRECTION('',(-1.,0.,0.)); +#459113 = ORIENTED_EDGE('',*,*,#459114,.T.); +#459114 = EDGE_CURVE('',#459107,#459115,#459117,.T.); +#459115 = VERTEX_POINT('',#459116); +#459116 = CARTESIAN_POINT('',(130.875047,-142.477316,-7.5E-02)); +#459117 = LINE('',#459118,#459119); +#459118 = CARTESIAN_POINT('',(130.875047,-143.629678,-7.5E-02)); +#459119 = VECTOR('',#459120,1.); +#459120 = DIRECTION('',(0.,1.,0.)); +#459121 = ORIENTED_EDGE('',*,*,#459122,.T.); +#459122 = EDGE_CURVE('',#459115,#459123,#459125,.T.); +#459123 = VERTEX_POINT('',#459124); +#459124 = CARTESIAN_POINT('',(130.586957,-142.477316,-7.5E-02)); +#459125 = LINE('',#459126,#459127); +#459126 = CARTESIAN_POINT('',(130.875047,-142.477316,-7.5E-02)); +#459127 = VECTOR('',#459128,1.); +#459128 = DIRECTION('',(-1.,0.,0.)); +#459129 = ORIENTED_EDGE('',*,*,#459130,.T.); +#459130 = EDGE_CURVE('',#459123,#459131,#459133,.T.); +#459131 = VERTEX_POINT('',#459132); +#459132 = CARTESIAN_POINT('',(130.586957,-142.765406,-7.5E-02)); +#459133 = LINE('',#459134,#459135); +#459134 = CARTESIAN_POINT('',(130.586957,-142.477316,-7.5E-02)); +#459135 = VECTOR('',#459136,1.); +#459136 = DIRECTION('',(0.,-1.,0.)); +#459137 = ORIENTED_EDGE('',*,*,#459138,.T.); +#459138 = EDGE_CURVE('',#459131,#459139,#459141,.T.); +#459139 = VERTEX_POINT('',#459140); +#459140 = CARTESIAN_POINT('',(130.298866,-142.765406,-7.5E-02)); +#459141 = LINE('',#459142,#459143); +#459142 = CARTESIAN_POINT('',(130.586957,-142.765406,-7.5E-02)); +#459143 = VECTOR('',#459144,1.); +#459144 = DIRECTION('',(-1.,0.,0.)); +#459145 = ORIENTED_EDGE('',*,*,#459146,.T.); +#459146 = EDGE_CURVE('',#459139,#459147,#459149,.T.); +#459147 = VERTEX_POINT('',#459148); +#459148 = CARTESIAN_POINT('',(130.298866,-142.477316,-7.5E-02)); +#459149 = LINE('',#459150,#459151); +#459150 = CARTESIAN_POINT('',(130.298866,-142.765406,-7.5E-02)); +#459151 = VECTOR('',#459152,1.); +#459152 = DIRECTION('',(0.,1.,0.)); +#459153 = ORIENTED_EDGE('',*,*,#459154,.T.); +#459154 = EDGE_CURVE('',#459147,#459155,#459157,.T.); +#459155 = VERTEX_POINT('',#459156); +#459156 = CARTESIAN_POINT('',(129.434594,-142.477316,-7.5E-02)); +#459157 = LINE('',#459158,#459159); +#459158 = CARTESIAN_POINT('',(130.298866,-142.477316,-7.5E-02)); +#459159 = VECTOR('',#459160,1.); +#459160 = DIRECTION('',(-1.,0.,0.)); +#459161 = ORIENTED_EDGE('',*,*,#459162,.T.); +#459162 = EDGE_CURVE('',#459155,#459163,#459165,.T.); +#459163 = VERTEX_POINT('',#459164); +#459164 = CARTESIAN_POINT('',(129.434594,-142.189225,-7.5E-02)); +#459165 = LINE('',#459166,#459167); +#459166 = CARTESIAN_POINT('',(129.434594,-142.477316,-7.5E-02)); +#459167 = VECTOR('',#459168,1.); +#459168 = DIRECTION('',(0.,1.,0.)); +#459169 = ORIENTED_EDGE('',*,*,#459170,.T.); +#459170 = EDGE_CURVE('',#459163,#459171,#459173,.T.); +#459171 = VERTEX_POINT('',#459172); +#459172 = CARTESIAN_POINT('',(128.858412,-142.189225,-7.5E-02)); +#459173 = LINE('',#459174,#459175); +#459174 = CARTESIAN_POINT('',(129.434594,-142.189225,-7.5E-02)); +#459175 = VECTOR('',#459176,1.); +#459176 = DIRECTION('',(-1.,0.,0.)); +#459177 = ORIENTED_EDGE('',*,*,#459178,.T.); +#459178 = EDGE_CURVE('',#459171,#459179,#459181,.T.); +#459179 = VERTEX_POINT('',#459180); +#459180 = CARTESIAN_POINT('',(128.858412,-141.901134,-7.5E-02)); +#459181 = LINE('',#459182,#459183); +#459182 = CARTESIAN_POINT('',(128.858412,-142.189225,-7.5E-02)); +#459183 = VECTOR('',#459184,1.); +#459184 = DIRECTION('',(0.,1.,0.)); +#459185 = ORIENTED_EDGE('',*,*,#459186,.T.); +#459186 = EDGE_CURVE('',#459179,#459187,#459189,.T.); +#459187 = VERTEX_POINT('',#459188); +#459188 = CARTESIAN_POINT('',(128.570322,-141.901134,-7.5E-02)); +#459189 = LINE('',#459190,#459191); +#459190 = CARTESIAN_POINT('',(128.858412,-141.901134,-7.5E-02)); +#459191 = VECTOR('',#459192,1.); +#459192 = DIRECTION('',(-1.,0.,0.)); +#459193 = ORIENTED_EDGE('',*,*,#459194,.T.); +#459194 = EDGE_CURVE('',#459187,#459195,#459197,.T.); +#459195 = VERTEX_POINT('',#459196); +#459196 = CARTESIAN_POINT('',(128.570322,-141.613043,-7.5E-02)); +#459197 = LINE('',#459198,#459199); +#459198 = CARTESIAN_POINT('',(128.570322,-141.901134,-7.5E-02)); +#459199 = VECTOR('',#459200,1.); +#459200 = DIRECTION('',(0.,1.,0.)); +#459201 = ORIENTED_EDGE('',*,*,#459202,.T.); +#459202 = EDGE_CURVE('',#459195,#459203,#459205,.T.); +#459203 = VERTEX_POINT('',#459204); +#459204 = CARTESIAN_POINT('',(128.858412,-141.613043,-7.5E-02)); +#459205 = LINE('',#459206,#459207); +#459206 = CARTESIAN_POINT('',(128.570322,-141.613043,-7.5E-02)); +#459207 = VECTOR('',#459208,1.); +#459208 = DIRECTION('',(1.,0.,0.)); +#459209 = ORIENTED_EDGE('',*,*,#459210,.T.); +#459210 = EDGE_CURVE('',#459203,#459211,#459213,.T.); +#459211 = VERTEX_POINT('',#459212); +#459212 = CARTESIAN_POINT('',(128.858412,-140.748771,-7.5E-02)); +#459213 = LINE('',#459214,#459215); +#459214 = CARTESIAN_POINT('',(128.858412,-141.613043,-7.5E-02)); +#459215 = VECTOR('',#459216,1.); +#459216 = DIRECTION('',(0.,1.,0.)); +#459217 = ORIENTED_EDGE('',*,*,#459218,.T.); +#459218 = EDGE_CURVE('',#459211,#459219,#459221,.T.); +#459219 = VERTEX_POINT('',#459220); +#459220 = CARTESIAN_POINT('',(128.570322,-140.748771,-7.5E-02)); +#459221 = LINE('',#459222,#459223); +#459222 = CARTESIAN_POINT('',(128.858412,-140.748771,-7.5E-02)); +#459223 = VECTOR('',#459224,1.); +#459224 = DIRECTION('',(-1.,0.,0.)); +#459225 = ORIENTED_EDGE('',*,*,#459226,.T.); +#459226 = EDGE_CURVE('',#459219,#459227,#459229,.T.); +#459227 = VERTEX_POINT('',#459228); +#459228 = CARTESIAN_POINT('',(128.570322,-140.46068,-7.5E-02)); +#459229 = LINE('',#459230,#459231); +#459230 = CARTESIAN_POINT('',(128.570322,-140.748771,-7.5E-02)); +#459231 = VECTOR('',#459232,1.); +#459232 = DIRECTION('',(0.,1.,0.)); +#459233 = ORIENTED_EDGE('',*,*,#459234,.T.); +#459234 = EDGE_CURVE('',#459227,#459235,#459237,.T.); +#459235 = VERTEX_POINT('',#459236); +#459236 = CARTESIAN_POINT('',(129.146503,-140.46068,-7.5E-02)); +#459237 = LINE('',#459238,#459239); +#459238 = CARTESIAN_POINT('',(128.570322,-140.46068,-7.5E-02)); +#459239 = VECTOR('',#459240,1.); +#459240 = DIRECTION('',(1.,0.,0.)); +#459241 = ORIENTED_EDGE('',*,*,#459242,.T.); +#459242 = EDGE_CURVE('',#459235,#459243,#459245,.T.); +#459243 = VERTEX_POINT('',#459244); +#459244 = CARTESIAN_POINT('',(129.146503,-140.748771,-7.5E-02)); +#459245 = LINE('',#459246,#459247); +#459246 = CARTESIAN_POINT('',(129.146503,-140.46068,-7.5E-02)); +#459247 = VECTOR('',#459248,1.); +#459248 = DIRECTION('',(0.,-1.,0.)); +#459249 = ORIENTED_EDGE('',*,*,#459250,.T.); +#459250 = EDGE_CURVE('',#459243,#459251,#459253,.T.); +#459251 = VERTEX_POINT('',#459252); +#459252 = CARTESIAN_POINT('',(129.434594,-140.748771,-7.5E-02)); +#459253 = LINE('',#459254,#459255); +#459254 = CARTESIAN_POINT('',(129.146503,-140.748771,-7.5E-02)); +#459255 = VECTOR('',#459256,1.); +#459256 = DIRECTION('',(1.,0.,0.)); +#459257 = ORIENTED_EDGE('',*,*,#459258,.T.); +#459258 = EDGE_CURVE('',#459251,#459259,#459261,.T.); +#459259 = VERTEX_POINT('',#459260); +#459260 = CARTESIAN_POINT('',(129.434594,-141.036862,-7.5E-02)); +#459261 = LINE('',#459262,#459263); +#459262 = CARTESIAN_POINT('',(129.434594,-140.748771,-7.5E-02)); +#459263 = VECTOR('',#459264,1.); +#459264 = DIRECTION('',(0.,-1.,0.)); +#459265 = ORIENTED_EDGE('',*,*,#459266,.T.); +#459266 = EDGE_CURVE('',#459259,#459267,#459269,.T.); +#459267 = VERTEX_POINT('',#459268); +#459268 = CARTESIAN_POINT('',(129.722684,-141.036862,-7.5E-02)); +#459269 = LINE('',#459270,#459271); +#459270 = CARTESIAN_POINT('',(129.434594,-141.036862,-7.5E-02)); +#459271 = VECTOR('',#459272,1.); +#459272 = DIRECTION('',(1.,0.,0.)); +#459273 = ORIENTED_EDGE('',*,*,#459274,.T.); +#459274 = EDGE_CURVE('',#459267,#459275,#459277,.T.); +#459275 = VERTEX_POINT('',#459276); +#459276 = CARTESIAN_POINT('',(129.722684,-139.308317,-7.5E-02)); +#459277 = LINE('',#459278,#459279); +#459278 = CARTESIAN_POINT('',(129.722684,-141.036862,-7.5E-02)); +#459279 = VECTOR('',#459280,1.); +#459280 = DIRECTION('',(0.,1.,0.)); +#459281 = ORIENTED_EDGE('',*,*,#459282,.T.); +#459282 = EDGE_CURVE('',#459275,#459283,#459285,.T.); +#459283 = VERTEX_POINT('',#459284); +#459284 = CARTESIAN_POINT('',(129.434594,-139.308317,-7.5E-02)); +#459285 = LINE('',#459286,#459287); +#459286 = CARTESIAN_POINT('',(129.722684,-139.308317,-7.5E-02)); +#459287 = VECTOR('',#459288,1.); +#459288 = DIRECTION('',(-1.,0.,0.)); +#459289 = ORIENTED_EDGE('',*,*,#459290,.T.); +#459290 = EDGE_CURVE('',#459283,#459291,#459293,.T.); +#459291 = VERTEX_POINT('',#459292); +#459292 = CARTESIAN_POINT('',(129.434594,-139.020227,-7.5E-02)); +#459293 = LINE('',#459294,#459295); +#459294 = CARTESIAN_POINT('',(129.434594,-139.308317,-7.5E-02)); +#459295 = VECTOR('',#459296,1.); +#459296 = DIRECTION('',(0.,1.,0.)); +#459297 = ORIENTED_EDGE('',*,*,#459298,.T.); +#459298 = EDGE_CURVE('',#459291,#459299,#459301,.T.); +#459299 = VERTEX_POINT('',#459300); +#459300 = CARTESIAN_POINT('',(129.146503,-139.020227,-7.5E-02)); +#459301 = LINE('',#459302,#459303); +#459302 = CARTESIAN_POINT('',(129.434594,-139.020227,-7.5E-02)); +#459303 = VECTOR('',#459304,1.); +#459304 = DIRECTION('',(-1.,0.,0.)); +#459305 = ORIENTED_EDGE('',*,*,#459306,.T.); +#459306 = EDGE_CURVE('',#459299,#459307,#459309,.T.); +#459307 = VERTEX_POINT('',#459308); +#459308 = CARTESIAN_POINT('',(129.146503,-138.732136,-7.5E-02)); +#459309 = LINE('',#459310,#459311); +#459310 = CARTESIAN_POINT('',(129.146503,-139.020227,-7.5E-02)); +#459311 = VECTOR('',#459312,1.); +#459312 = DIRECTION('',(0.,1.,0.)); +#459313 = ORIENTED_EDGE('',*,*,#459314,.T.); +#459314 = EDGE_CURVE('',#459307,#459315,#459317,.T.); +#459315 = VERTEX_POINT('',#459316); +#459316 = CARTESIAN_POINT('',(129.434594,-138.732136,-7.5E-02)); +#459317 = LINE('',#459318,#459319); +#459318 = CARTESIAN_POINT('',(129.146503,-138.732136,-7.5E-02)); +#459319 = VECTOR('',#459320,1.); +#459320 = DIRECTION('',(1.,0.,0.)); +#459321 = ORIENTED_EDGE('',*,*,#459322,.T.); +#459322 = EDGE_CURVE('',#459315,#459291,#459323,.T.); +#459323 = LINE('',#459324,#459325); +#459324 = CARTESIAN_POINT('',(129.434594,-138.732136,-7.5E-02)); +#459325 = VECTOR('',#459326,1.); +#459326 = DIRECTION('',(0.,-1.,0.)); +#459327 = ORIENTED_EDGE('',*,*,#459328,.T.); +#459328 = EDGE_CURVE('',#459291,#459329,#459331,.T.); +#459329 = VERTEX_POINT('',#459330); +#459330 = CARTESIAN_POINT('',(129.722684,-139.020227,-7.5E-02)); +#459331 = LINE('',#459332,#459333); +#459332 = CARTESIAN_POINT('',(129.434594,-139.020227,-7.5E-02)); +#459333 = VECTOR('',#459334,1.); +#459334 = DIRECTION('',(1.,0.,0.)); +#459335 = ORIENTED_EDGE('',*,*,#459336,.T.); +#459336 = EDGE_CURVE('',#459329,#459337,#459339,.T.); +#459337 = VERTEX_POINT('',#459338); +#459338 = CARTESIAN_POINT('',(129.722684,-138.444045,-7.5E-02)); +#459339 = LINE('',#459340,#459341); +#459340 = CARTESIAN_POINT('',(129.722684,-139.020227,-7.5E-02)); +#459341 = VECTOR('',#459342,1.); +#459342 = DIRECTION('',(0.,1.,0.)); +#459343 = ORIENTED_EDGE('',*,*,#459344,.T.); +#459344 = EDGE_CURVE('',#459337,#459345,#459347,.T.); +#459345 = VERTEX_POINT('',#459346); +#459346 = CARTESIAN_POINT('',(130.010775,-138.444045,-7.5E-02)); +#459347 = LINE('',#459348,#459349); +#459348 = CARTESIAN_POINT('',(129.722684,-138.444045,-7.5E-02)); +#459349 = VECTOR('',#459350,1.); +#459350 = DIRECTION('',(1.,0.,0.)); +#459351 = ORIENTED_EDGE('',*,*,#459352,.T.); +#459352 = EDGE_CURVE('',#459345,#459353,#459355,.T.); +#459353 = VERTEX_POINT('',#459354); +#459354 = CARTESIAN_POINT('',(130.010775,-138.155954,-7.5E-02)); +#459355 = LINE('',#459356,#459357); +#459356 = CARTESIAN_POINT('',(130.010775,-138.444045,-7.5E-02)); +#459357 = VECTOR('',#459358,1.); +#459358 = DIRECTION('',(0.,1.,0.)); +#459359 = ORIENTED_EDGE('',*,*,#459360,.T.); +#459360 = EDGE_CURVE('',#459353,#459361,#459363,.T.); +#459361 = VERTEX_POINT('',#459362); +#459362 = CARTESIAN_POINT('',(129.434594,-138.155954,-7.5E-02)); +#459363 = LINE('',#459364,#459365); +#459364 = CARTESIAN_POINT('',(130.010775,-138.155954,-7.5E-02)); +#459365 = VECTOR('',#459366,1.); +#459366 = DIRECTION('',(-1.,0.,0.)); +#459367 = ORIENTED_EDGE('',*,*,#459368,.T.); +#459368 = EDGE_CURVE('',#459361,#459369,#459371,.T.); +#459369 = VERTEX_POINT('',#459370); +#459370 = CARTESIAN_POINT('',(129.434594,-137.867864,-7.5E-02)); +#459371 = LINE('',#459372,#459373); +#459372 = CARTESIAN_POINT('',(129.434594,-138.155954,-7.5E-02)); +#459373 = VECTOR('',#459374,1.); +#459374 = DIRECTION('',(0.,1.,0.)); +#459375 = ORIENTED_EDGE('',*,*,#459376,.T.); +#459376 = EDGE_CURVE('',#459369,#459377,#459379,.T.); +#459377 = VERTEX_POINT('',#459378); +#459378 = CARTESIAN_POINT('',(129.146503,-137.867864,-7.5E-02)); +#459379 = LINE('',#459380,#459381); +#459380 = CARTESIAN_POINT('',(129.434594,-137.867864,-7.5E-02)); +#459381 = VECTOR('',#459382,1.); +#459382 = DIRECTION('',(-1.,0.,0.)); +#459383 = ORIENTED_EDGE('',*,*,#459384,.T.); +#459384 = EDGE_CURVE('',#459377,#459385,#459387,.T.); +#459385 = VERTEX_POINT('',#459386); +#459386 = CARTESIAN_POINT('',(129.146503,-137.579773,-7.5E-02)); +#459387 = LINE('',#459388,#459389); +#459388 = CARTESIAN_POINT('',(129.146503,-137.867864,-7.5E-02)); +#459389 = VECTOR('',#459390,1.); +#459390 = DIRECTION('',(0.,1.,0.)); +#459391 = ORIENTED_EDGE('',*,*,#459392,.T.); +#459392 = EDGE_CURVE('',#459385,#459393,#459395,.T.); +#459393 = VERTEX_POINT('',#459394); +#459394 = CARTESIAN_POINT('',(130.010775,-137.579773,-7.5E-02)); +#459395 = LINE('',#459396,#459397); +#459396 = CARTESIAN_POINT('',(129.146503,-137.579773,-7.5E-02)); +#459397 = VECTOR('',#459398,1.); +#459398 = DIRECTION('',(1.,0.,0.)); +#459399 = ORIENTED_EDGE('',*,*,#459400,.T.); +#459400 = EDGE_CURVE('',#459393,#459401,#459403,.T.); +#459401 = VERTEX_POINT('',#459402); +#459402 = CARTESIAN_POINT('',(130.010775,-137.291682,-7.5E-02)); +#459403 = LINE('',#459404,#459405); +#459404 = CARTESIAN_POINT('',(130.010775,-137.579773,-7.5E-02)); +#459405 = VECTOR('',#459406,1.); +#459406 = DIRECTION('',(0.,1.,0.)); +#459407 = ORIENTED_EDGE('',*,*,#459408,.T.); +#459408 = EDGE_CURVE('',#459401,#459409,#459411,.T.); +#459409 = VERTEX_POINT('',#459410); +#459410 = CARTESIAN_POINT('',(130.875047,-137.291682,-7.5E-02)); +#459411 = LINE('',#459412,#459413); +#459412 = CARTESIAN_POINT('',(130.010775,-137.291682,-7.5E-02)); +#459413 = VECTOR('',#459414,1.); +#459414 = DIRECTION('',(1.,0.,0.)); +#459415 = ORIENTED_EDGE('',*,*,#459416,.T.); +#459416 = EDGE_CURVE('',#459409,#459417,#459419,.T.); +#459417 = VERTEX_POINT('',#459418); +#459418 = CARTESIAN_POINT('',(130.875047,-137.003592,-7.5E-02)); +#459419 = LINE('',#459420,#459421); +#459420 = CARTESIAN_POINT('',(130.875047,-137.291682,-7.5E-02)); +#459421 = VECTOR('',#459422,1.); +#459422 = DIRECTION('',(0.,1.,0.)); +#459423 = ORIENTED_EDGE('',*,*,#459424,.T.); +#459424 = EDGE_CURVE('',#459417,#459425,#459427,.T.); +#459425 = VERTEX_POINT('',#459426); +#459426 = CARTESIAN_POINT('',(132.02741,-137.003592,-7.5E-02)); +#459427 = LINE('',#459428,#459429); +#459428 = CARTESIAN_POINT('',(130.875047,-137.003592,-7.5E-02)); +#459429 = VECTOR('',#459430,1.); +#459430 = DIRECTION('',(1.,0.,0.)); +#459431 = ORIENTED_EDGE('',*,*,#459432,.T.); +#459432 = EDGE_CURVE('',#459425,#459433,#459435,.T.); +#459433 = VERTEX_POINT('',#459434); +#459434 = CARTESIAN_POINT('',(132.02741,-137.291682,-7.5E-02)); +#459435 = LINE('',#459436,#459437); +#459436 = CARTESIAN_POINT('',(132.02741,-137.003592,-7.5E-02)); +#459437 = VECTOR('',#459438,1.); +#459438 = DIRECTION('',(0.,-1.,0.)); +#459439 = ORIENTED_EDGE('',*,*,#459440,.T.); +#459440 = EDGE_CURVE('',#459433,#459441,#459443,.T.); +#459441 = VERTEX_POINT('',#459442); +#459442 = CARTESIAN_POINT('',(131.73932,-137.291682,-7.5E-02)); +#459443 = LINE('',#459444,#459445); +#459444 = CARTESIAN_POINT('',(132.02741,-137.291682,-7.5E-02)); +#459445 = VECTOR('',#459446,1.); +#459446 = DIRECTION('',(-1.,0.,0.)); +#459447 = ORIENTED_EDGE('',*,*,#459448,.T.); +#459448 = EDGE_CURVE('',#459441,#459449,#459451,.T.); +#459449 = VERTEX_POINT('',#459450); +#459450 = CARTESIAN_POINT('',(131.73932,-137.579773,-7.5E-02)); +#459451 = LINE('',#459452,#459453); +#459452 = CARTESIAN_POINT('',(131.73932,-137.291682,-7.5E-02)); +#459453 = VECTOR('',#459454,1.); +#459454 = DIRECTION('',(0.,-1.,0.)); +#459455 = ORIENTED_EDGE('',*,*,#459456,.T.); +#459456 = EDGE_CURVE('',#459449,#459457,#459459,.T.); +#459457 = VERTEX_POINT('',#459458); +#459458 = CARTESIAN_POINT('',(131.451229,-137.579773,-7.5E-02)); +#459459 = LINE('',#459460,#459461); +#459460 = CARTESIAN_POINT('',(131.73932,-137.579773,-7.5E-02)); +#459461 = VECTOR('',#459462,1.); +#459462 = DIRECTION('',(-1.,0.,0.)); +#459463 = ORIENTED_EDGE('',*,*,#459464,.T.); +#459464 = EDGE_CURVE('',#459457,#459465,#459467,.T.); +#459465 = VERTEX_POINT('',#459466); +#459466 = CARTESIAN_POINT('',(131.451229,-137.867864,-7.5E-02)); +#459467 = LINE('',#459468,#459469); +#459468 = CARTESIAN_POINT('',(131.451229,-137.579773,-7.5E-02)); +#459469 = VECTOR('',#459470,1.); +#459470 = DIRECTION('',(0.,-1.,0.)); +#459471 = ORIENTED_EDGE('',*,*,#459472,.T.); +#459472 = EDGE_CURVE('',#459465,#459473,#459475,.T.); +#459473 = VERTEX_POINT('',#459474); +#459474 = CARTESIAN_POINT('',(132.02741,-137.867864,-7.5E-02)); +#459475 = LINE('',#459476,#459477); +#459476 = CARTESIAN_POINT('',(131.451229,-137.867864,-7.5E-02)); +#459477 = VECTOR('',#459478,1.); +#459478 = DIRECTION('',(1.,0.,0.)); +#459479 = ORIENTED_EDGE('',*,*,#459480,.T.); +#459480 = EDGE_CURVE('',#459473,#459481,#459483,.T.); +#459481 = VERTEX_POINT('',#459482); +#459482 = CARTESIAN_POINT('',(132.02741,-137.579773,-7.5E-02)); +#459483 = LINE('',#459484,#459485); +#459484 = CARTESIAN_POINT('',(132.02741,-137.867864,-7.5E-02)); +#459485 = VECTOR('',#459486,1.); +#459486 = DIRECTION('',(0.,1.,0.)); +#459487 = ORIENTED_EDGE('',*,*,#459488,.T.); +#459488 = EDGE_CURVE('',#459481,#459489,#459491,.T.); +#459489 = VERTEX_POINT('',#459490); +#459490 = CARTESIAN_POINT('',(132.603592,-137.579773,-7.5E-02)); +#459491 = LINE('',#459492,#459493); +#459492 = CARTESIAN_POINT('',(132.02741,-137.579773,-7.5E-02)); +#459493 = VECTOR('',#459494,1.); +#459494 = DIRECTION('',(1.,0.,0.)); +#459495 = ORIENTED_EDGE('',*,*,#459496,.T.); +#459496 = EDGE_CURVE('',#459489,#459497,#459499,.T.); +#459497 = VERTEX_POINT('',#459498); +#459498 = CARTESIAN_POINT('',(132.603592,-137.003592,-7.5E-02)); +#459499 = LINE('',#459500,#459501); +#459500 = CARTESIAN_POINT('',(132.603592,-137.579773,-7.5E-02)); +#459501 = VECTOR('',#459502,1.); +#459502 = DIRECTION('',(0.,1.,0.)); +#459503 = ORIENTED_EDGE('',*,*,#459504,.T.); +#459504 = EDGE_CURVE('',#459497,#459505,#459507,.T.); +#459505 = VERTEX_POINT('',#459506); +#459506 = CARTESIAN_POINT('',(133.179773,-137.003592,-7.5E-02)); +#459507 = LINE('',#459508,#459509); +#459508 = CARTESIAN_POINT('',(132.603592,-137.003592,-7.5E-02)); +#459509 = VECTOR('',#459510,1.); +#459510 = DIRECTION('',(1.,0.,0.)); +#459511 = ORIENTED_EDGE('',*,*,#459512,.T.); +#459512 = EDGE_CURVE('',#459505,#459513,#459515,.T.); +#459513 = VERTEX_POINT('',#459514); +#459514 = CARTESIAN_POINT('',(133.179773,-137.291682,-7.5E-02)); +#459515 = LINE('',#459516,#459517); +#459516 = CARTESIAN_POINT('',(133.179773,-137.003592,-7.5E-02)); +#459517 = VECTOR('',#459518,1.); +#459518 = DIRECTION('',(0.,-1.,0.)); +#459519 = ORIENTED_EDGE('',*,*,#459520,.T.); +#459520 = EDGE_CURVE('',#459513,#459521,#459523,.T.); +#459521 = VERTEX_POINT('',#459522); +#459522 = CARTESIAN_POINT('',(133.467864,-137.291682,-7.5E-02)); +#459523 = LINE('',#459524,#459525); +#459524 = CARTESIAN_POINT('',(133.179773,-137.291682,-7.5E-02)); +#459525 = VECTOR('',#459526,1.); +#459526 = DIRECTION('',(1.,0.,0.)); +#459527 = ORIENTED_EDGE('',*,*,#459528,.T.); +#459528 = EDGE_CURVE('',#459521,#458219,#459529,.T.); +#459529 = LINE('',#459530,#459531); +#459530 = CARTESIAN_POINT('',(133.467864,-137.291682,-7.5E-02)); +#459531 = VECTOR('',#459532,1.); +#459532 = DIRECTION('',(0.,-1.,0.)); +#459533 = ORIENTED_EDGE('',*,*,#459534,.T.); +#459534 = EDGE_CURVE('',#458219,#458155,#459535,.T.); +#459535 = LINE('',#459536,#459537); +#459536 = CARTESIAN_POINT('',(133.467864,-137.579773,-7.5E-02)); +#459537 = VECTOR('',#459538,1.); +#459538 = DIRECTION('',(1.,0.,0.)); +#459539 = FACE_BOUND('',#459540,.T.); +#459540 = EDGE_LOOP('',(#459541,#459551,#459559,#459567,#459575,#459583) + ); +#459541 = ORIENTED_EDGE('',*,*,#459542,.T.); +#459542 = EDGE_CURVE('',#459543,#459545,#459547,.T.); +#459543 = VERTEX_POINT('',#459544); +#459544 = CARTESIAN_POINT('',(132.02741,-142.765406,-7.5E-02)); +#459545 = VERTEX_POINT('',#459546); +#459546 = CARTESIAN_POINT('',(132.02741,-142.189225,-7.5E-02)); +#459547 = LINE('',#459548,#459549); +#459548 = CARTESIAN_POINT('',(132.02741,-142.765406,-7.5E-02)); +#459549 = VECTOR('',#459550,1.); +#459550 = DIRECTION('',(0.,1.,0.)); +#459551 = ORIENTED_EDGE('',*,*,#459552,.T.); +#459552 = EDGE_CURVE('',#459545,#459553,#459555,.T.); +#459553 = VERTEX_POINT('',#459554); +#459554 = CARTESIAN_POINT('',(131.163138,-142.189225,-7.5E-02)); +#459555 = LINE('',#459556,#459557); +#459556 = CARTESIAN_POINT('',(132.02741,-142.189225,-7.5E-02)); +#459557 = VECTOR('',#459558,1.); +#459558 = DIRECTION('',(-1.,0.,0.)); +#459559 = ORIENTED_EDGE('',*,*,#459560,.T.); +#459560 = EDGE_CURVE('',#459553,#459561,#459563,.T.); +#459561 = VERTEX_POINT('',#459562); +#459562 = CARTESIAN_POINT('',(131.163138,-143.053497,-7.5E-02)); +#459563 = LINE('',#459564,#459565); +#459564 = CARTESIAN_POINT('',(131.163138,-142.189225,-7.5E-02)); +#459565 = VECTOR('',#459566,1.); +#459566 = DIRECTION('',(0.,-1.,0.)); +#459567 = ORIENTED_EDGE('',*,*,#459568,.T.); +#459568 = EDGE_CURVE('',#459561,#459569,#459571,.T.); +#459569 = VERTEX_POINT('',#459570); +#459570 = CARTESIAN_POINT('',(131.73932,-143.053497,-7.5E-02)); +#459571 = LINE('',#459572,#459573); +#459572 = CARTESIAN_POINT('',(131.163138,-143.053497,-7.5E-02)); +#459573 = VECTOR('',#459574,1.); +#459574 = DIRECTION('',(1.,0.,0.)); +#459575 = ORIENTED_EDGE('',*,*,#459576,.T.); +#459576 = EDGE_CURVE('',#459569,#459577,#459579,.T.); +#459577 = VERTEX_POINT('',#459578); +#459578 = CARTESIAN_POINT('',(131.73932,-142.765406,-7.5E-02)); +#459579 = LINE('',#459580,#459581); +#459580 = CARTESIAN_POINT('',(131.73932,-143.053497,-7.5E-02)); +#459581 = VECTOR('',#459582,1.); +#459582 = DIRECTION('',(0.,1.,0.)); +#459583 = ORIENTED_EDGE('',*,*,#459584,.T.); +#459584 = EDGE_CURVE('',#459577,#459543,#459585,.T.); +#459585 = LINE('',#459586,#459587); +#459586 = CARTESIAN_POINT('',(131.73932,-142.765406,-7.5E-02)); +#459587 = VECTOR('',#459588,1.); +#459588 = DIRECTION('',(1.,0.,0.)); +#459589 = FACE_BOUND('',#459590,.T.); +#459590 = EDGE_LOOP('',(#459591,#459601,#459609,#459617,#459625,#459633, + #459641,#459649,#459657,#459665,#459673)); +#459591 = ORIENTED_EDGE('',*,*,#459592,.T.); +#459592 = EDGE_CURVE('',#459593,#459595,#459597,.T.); +#459593 = VERTEX_POINT('',#459594); +#459594 = CARTESIAN_POINT('',(132.891683,-142.189225,-7.5E-02)); +#459595 = VERTEX_POINT('',#459596); +#459596 = CARTESIAN_POINT('',(132.891683,-141.901134,-7.5E-02)); +#459597 = LINE('',#459598,#459599); +#459598 = CARTESIAN_POINT('',(132.891683,-142.189225,-7.5E-02)); +#459599 = VECTOR('',#459600,1.); +#459600 = DIRECTION('',(0.,1.,0.)); +#459601 = ORIENTED_EDGE('',*,*,#459602,.T.); +#459602 = EDGE_CURVE('',#459595,#459603,#459605,.T.); +#459603 = VERTEX_POINT('',#459604); +#459604 = CARTESIAN_POINT('',(132.603592,-141.901134,-7.5E-02)); +#459605 = LINE('',#459606,#459607); +#459606 = CARTESIAN_POINT('',(132.891683,-141.901134,-7.5E-02)); +#459607 = VECTOR('',#459608,1.); +#459608 = DIRECTION('',(-1.,0.,0.)); +#459609 = ORIENTED_EDGE('',*,*,#459610,.T.); +#459610 = EDGE_CURVE('',#459603,#459611,#459613,.T.); +#459611 = VERTEX_POINT('',#459612); +#459612 = CARTESIAN_POINT('',(132.603592,-142.189225,-7.5E-02)); +#459613 = LINE('',#459614,#459615); +#459614 = CARTESIAN_POINT('',(132.603592,-141.901134,-7.5E-02)); +#459615 = VECTOR('',#459616,1.); +#459616 = DIRECTION('',(0.,-1.,0.)); +#459617 = ORIENTED_EDGE('',*,*,#459618,.T.); +#459618 = EDGE_CURVE('',#459611,#459619,#459621,.T.); +#459619 = VERTEX_POINT('',#459620); +#459620 = CARTESIAN_POINT('',(132.315501,-142.189225,-7.5E-02)); +#459621 = LINE('',#459622,#459623); +#459622 = CARTESIAN_POINT('',(132.603592,-142.189225,-7.5E-02)); +#459623 = VECTOR('',#459624,1.); +#459624 = DIRECTION('',(-1.,0.,0.)); +#459625 = ORIENTED_EDGE('',*,*,#459626,.T.); +#459626 = EDGE_CURVE('',#459619,#459627,#459629,.T.); +#459627 = VERTEX_POINT('',#459628); +#459628 = CARTESIAN_POINT('',(132.315501,-142.621361,-7.5E-02)); +#459629 = LINE('',#459630,#459631); +#459630 = CARTESIAN_POINT('',(132.315501,-142.189225,-7.5E-02)); +#459631 = VECTOR('',#459632,1.); +#459632 = DIRECTION('',(0.,-1.,0.)); +#459633 = ORIENTED_EDGE('',*,*,#459634,.T.); +#459634 = EDGE_CURVE('',#459627,#459635,#459637,.T.); +#459635 = VERTEX_POINT('',#459636); +#459636 = CARTESIAN_POINT('',(132.315501,-143.053497,-7.5E-02)); +#459637 = LINE('',#459638,#459639); +#459638 = CARTESIAN_POINT('',(132.315501,-142.621361,-7.5E-02)); +#459639 = VECTOR('',#459640,1.); +#459640 = DIRECTION('',(0.,-1.,0.)); +#459641 = ORIENTED_EDGE('',*,*,#459642,.T.); +#459642 = EDGE_CURVE('',#459635,#459643,#459645,.T.); +#459643 = VERTEX_POINT('',#459644); +#459644 = CARTESIAN_POINT('',(132.891683,-143.053497,-7.5E-02)); +#459645 = LINE('',#459646,#459647); +#459646 = CARTESIAN_POINT('',(132.315501,-143.053497,-7.5E-02)); +#459647 = VECTOR('',#459648,1.); +#459648 = DIRECTION('',(1.,0.,0.)); +#459649 = ORIENTED_EDGE('',*,*,#459650,.T.); +#459650 = EDGE_CURVE('',#459643,#459651,#459653,.T.); +#459651 = VERTEX_POINT('',#459652); +#459652 = CARTESIAN_POINT('',(132.891683,-142.765406,-7.5E-02)); +#459653 = LINE('',#459654,#459655); +#459654 = CARTESIAN_POINT('',(132.891683,-143.053497,-7.5E-02)); +#459655 = VECTOR('',#459656,1.); +#459656 = DIRECTION('',(0.,1.,0.)); +#459657 = ORIENTED_EDGE('',*,*,#459658,.T.); +#459658 = EDGE_CURVE('',#459651,#459659,#459661,.T.); +#459659 = VERTEX_POINT('',#459660); +#459660 = CARTESIAN_POINT('',(133.179773,-142.765406,-7.5E-02)); +#459661 = LINE('',#459662,#459663); +#459662 = CARTESIAN_POINT('',(132.891683,-142.765406,-7.5E-02)); +#459663 = VECTOR('',#459664,1.); +#459664 = DIRECTION('',(1.,0.,0.)); +#459665 = ORIENTED_EDGE('',*,*,#459666,.T.); +#459666 = EDGE_CURVE('',#459659,#459667,#459669,.T.); +#459667 = VERTEX_POINT('',#459668); +#459668 = CARTESIAN_POINT('',(133.179773,-142.189225,-7.5E-02)); +#459669 = LINE('',#459670,#459671); +#459670 = CARTESIAN_POINT('',(133.179773,-142.765406,-7.5E-02)); +#459671 = VECTOR('',#459672,1.); +#459672 = DIRECTION('',(0.,1.,0.)); +#459673 = ORIENTED_EDGE('',*,*,#459674,.T.); +#459674 = EDGE_CURVE('',#459667,#459593,#459675,.T.); +#459675 = LINE('',#459676,#459677); +#459676 = CARTESIAN_POINT('',(133.179773,-142.189225,-7.5E-02)); +#459677 = VECTOR('',#459678,1.); +#459678 = DIRECTION('',(-1.,0.,0.)); +#459679 = FACE_BOUND('',#459680,.T.); +#459680 = EDGE_LOOP('',(#459681,#459691,#459699,#459707,#459715)); +#459681 = ORIENTED_EDGE('',*,*,#459682,.T.); +#459682 = EDGE_CURVE('',#459683,#459685,#459687,.T.); +#459683 = VERTEX_POINT('',#459684); +#459684 = CARTESIAN_POINT('',(129.722684,-141.901134,-7.5E-02)); +#459685 = VERTEX_POINT('',#459686); +#459686 = CARTESIAN_POINT('',(129.578639,-141.901134,-7.5E-02)); +#459687 = LINE('',#459688,#459689); +#459688 = CARTESIAN_POINT('',(129.722684,-141.901134,-7.5E-02)); +#459689 = VECTOR('',#459690,1.); +#459690 = DIRECTION('',(-1.,0.,0.)); +#459691 = ORIENTED_EDGE('',*,*,#459692,.T.); +#459692 = EDGE_CURVE('',#459685,#459693,#459695,.T.); +#459693 = VERTEX_POINT('',#459694); +#459694 = CARTESIAN_POINT('',(129.434594,-141.901134,-7.5E-02)); +#459695 = LINE('',#459696,#459697); +#459696 = CARTESIAN_POINT('',(129.578639,-141.901134,-7.5E-02)); +#459697 = VECTOR('',#459698,1.); +#459698 = DIRECTION('',(-1.,0.,0.)); +#459699 = ORIENTED_EDGE('',*,*,#459700,.T.); +#459700 = EDGE_CURVE('',#459693,#459701,#459703,.T.); +#459701 = VERTEX_POINT('',#459702); +#459702 = CARTESIAN_POINT('',(129.434594,-142.189225,-7.5E-02)); +#459703 = LINE('',#459704,#459705); +#459704 = CARTESIAN_POINT('',(129.434594,-141.901134,-7.5E-02)); +#459705 = VECTOR('',#459706,1.); +#459706 = DIRECTION('',(0.,-1.,0.)); +#459707 = ORIENTED_EDGE('',*,*,#459708,.T.); +#459708 = EDGE_CURVE('',#459701,#459709,#459711,.T.); +#459709 = VERTEX_POINT('',#459710); +#459710 = CARTESIAN_POINT('',(129.722684,-142.189225,-7.5E-02)); +#459711 = LINE('',#459712,#459713); +#459712 = CARTESIAN_POINT('',(129.434594,-142.189225,-7.5E-02)); +#459713 = VECTOR('',#459714,1.); +#459714 = DIRECTION('',(1.,0.,0.)); +#459715 = ORIENTED_EDGE('',*,*,#459716,.T.); +#459716 = EDGE_CURVE('',#459709,#459683,#459717,.T.); +#459717 = LINE('',#459718,#459719); +#459718 = CARTESIAN_POINT('',(129.722684,-142.189225,-7.5E-02)); +#459719 = VECTOR('',#459720,1.); +#459720 = DIRECTION('',(0.,1.,0.)); +#459721 = FACE_BOUND('',#459722,.T.); +#459722 = EDGE_LOOP('',(#459723,#459733,#459741,#459749)); +#459723 = ORIENTED_EDGE('',*,*,#459724,.T.); +#459724 = EDGE_CURVE('',#459725,#459727,#459729,.T.); +#459725 = VERTEX_POINT('',#459726); +#459726 = CARTESIAN_POINT('',(130.875047,-142.189225,-7.5E-02)); +#459727 = VERTEX_POINT('',#459728); +#459728 = CARTESIAN_POINT('',(130.875047,-141.324953,-7.5E-02)); +#459729 = LINE('',#459730,#459731); +#459730 = CARTESIAN_POINT('',(130.875047,-142.189225,-7.5E-02)); +#459731 = VECTOR('',#459732,1.); +#459732 = DIRECTION('',(0.,1.,0.)); +#459733 = ORIENTED_EDGE('',*,*,#459734,.T.); +#459734 = EDGE_CURVE('',#459727,#459735,#459737,.T.); +#459735 = VERTEX_POINT('',#459736); +#459736 = CARTESIAN_POINT('',(130.010775,-141.324953,-7.5E-02)); +#459737 = LINE('',#459738,#459739); +#459738 = CARTESIAN_POINT('',(130.875047,-141.324953,-7.5E-02)); +#459739 = VECTOR('',#459740,1.); +#459740 = DIRECTION('',(-1.,0.,0.)); +#459741 = ORIENTED_EDGE('',*,*,#459742,.T.); +#459742 = EDGE_CURVE('',#459735,#459743,#459745,.T.); +#459743 = VERTEX_POINT('',#459744); +#459744 = CARTESIAN_POINT('',(130.010775,-142.189225,-7.5E-02)); +#459745 = LINE('',#459746,#459747); +#459746 = CARTESIAN_POINT('',(130.010775,-141.324953,-7.5E-02)); +#459747 = VECTOR('',#459748,1.); +#459748 = DIRECTION('',(0.,-1.,0.)); +#459749 = ORIENTED_EDGE('',*,*,#459750,.T.); +#459750 = EDGE_CURVE('',#459743,#459725,#459751,.T.); +#459751 = LINE('',#459752,#459753); +#459752 = CARTESIAN_POINT('',(130.010775,-142.189225,-7.5E-02)); +#459753 = VECTOR('',#459754,1.); +#459754 = DIRECTION('',(1.,0.,0.)); +#459755 = FACE_BOUND('',#459756,.T.); +#459756 = EDGE_LOOP('',(#459757,#459767,#459775,#459783)); +#459757 = ORIENTED_EDGE('',*,*,#459758,.T.); +#459758 = EDGE_CURVE('',#459759,#459761,#459763,.T.); +#459759 = VERTEX_POINT('',#459760); +#459760 = CARTESIAN_POINT('',(129.434594,-141.901134,-7.5E-02)); +#459761 = VERTEX_POINT('',#459762); +#459762 = CARTESIAN_POINT('',(129.434594,-141.613043,-7.5E-02)); +#459763 = LINE('',#459764,#459765); +#459764 = CARTESIAN_POINT('',(129.434594,-141.901134,-7.5E-02)); +#459765 = VECTOR('',#459766,1.); +#459766 = DIRECTION('',(0.,1.,0.)); +#459767 = ORIENTED_EDGE('',*,*,#459768,.T.); +#459768 = EDGE_CURVE('',#459761,#459769,#459771,.T.); +#459769 = VERTEX_POINT('',#459770); +#459770 = CARTESIAN_POINT('',(129.146503,-141.613043,-7.5E-02)); +#459771 = LINE('',#459772,#459773); +#459772 = CARTESIAN_POINT('',(129.434594,-141.613043,-7.5E-02)); +#459773 = VECTOR('',#459774,1.); +#459774 = DIRECTION('',(-1.,0.,0.)); +#459775 = ORIENTED_EDGE('',*,*,#459776,.T.); +#459776 = EDGE_CURVE('',#459769,#459777,#459779,.T.); +#459777 = VERTEX_POINT('',#459778); +#459778 = CARTESIAN_POINT('',(129.146503,-141.901134,-7.5E-02)); +#459779 = LINE('',#459780,#459781); +#459780 = CARTESIAN_POINT('',(129.146503,-141.613043,-7.5E-02)); +#459781 = VECTOR('',#459782,1.); +#459782 = DIRECTION('',(0.,-1.,0.)); +#459783 = ORIENTED_EDGE('',*,*,#459784,.T.); +#459784 = EDGE_CURVE('',#459777,#459759,#459785,.T.); +#459785 = LINE('',#459786,#459787); +#459786 = CARTESIAN_POINT('',(129.146503,-141.901134,-7.5E-02)); +#459787 = VECTOR('',#459788,1.); +#459788 = DIRECTION('',(1.,0.,0.)); +#459789 = FACE_BOUND('',#459790,.T.); +#459790 = EDGE_LOOP('',(#459791,#459801,#459809,#459817,#459825)); +#459791 = ORIENTED_EDGE('',*,*,#459792,.T.); +#459792 = EDGE_CURVE('',#459793,#459795,#459797,.T.); +#459793 = VERTEX_POINT('',#459794); +#459794 = CARTESIAN_POINT('',(129.722684,-141.613043,-7.5E-02)); +#459795 = VERTEX_POINT('',#459796); +#459796 = CARTESIAN_POINT('',(129.722684,-141.324953,-7.5E-02)); +#459797 = LINE('',#459798,#459799); +#459798 = CARTESIAN_POINT('',(129.722684,-141.613043,-7.5E-02)); +#459799 = VECTOR('',#459800,1.); +#459800 = DIRECTION('',(0.,1.,0.)); +#459801 = ORIENTED_EDGE('',*,*,#459802,.T.); +#459802 = EDGE_CURVE('',#459795,#459803,#459805,.T.); +#459803 = VERTEX_POINT('',#459804); +#459804 = CARTESIAN_POINT('',(129.434594,-141.324953,-7.5E-02)); +#459805 = LINE('',#459806,#459807); +#459806 = CARTESIAN_POINT('',(129.722684,-141.324953,-7.5E-02)); +#459807 = VECTOR('',#459808,1.); +#459808 = DIRECTION('',(-1.,0.,0.)); +#459809 = ORIENTED_EDGE('',*,*,#459810,.T.); +#459810 = EDGE_CURVE('',#459803,#459811,#459813,.T.); +#459811 = VERTEX_POINT('',#459812); +#459812 = CARTESIAN_POINT('',(129.434594,-141.468998,-7.5E-02)); +#459813 = LINE('',#459814,#459815); +#459814 = CARTESIAN_POINT('',(129.434594,-141.324953,-7.5E-02)); +#459815 = VECTOR('',#459816,1.); +#459816 = DIRECTION('',(0.,-1.,0.)); +#459817 = ORIENTED_EDGE('',*,*,#459818,.T.); +#459818 = EDGE_CURVE('',#459811,#459819,#459821,.T.); +#459819 = VERTEX_POINT('',#459820); +#459820 = CARTESIAN_POINT('',(129.434594,-141.613043,-7.5E-02)); +#459821 = LINE('',#459822,#459823); +#459822 = CARTESIAN_POINT('',(129.434594,-141.468998,-7.5E-02)); +#459823 = VECTOR('',#459824,1.); +#459824 = DIRECTION('',(0.,-1.,0.)); +#459825 = ORIENTED_EDGE('',*,*,#459826,.T.); +#459826 = EDGE_CURVE('',#459819,#459793,#459827,.T.); +#459827 = LINE('',#459828,#459829); +#459828 = CARTESIAN_POINT('',(129.434594,-141.613043,-7.5E-02)); +#459829 = VECTOR('',#459830,1.); +#459830 = DIRECTION('',(1.,0.,0.)); +#459831 = FACE_BOUND('',#459832,.T.); +#459832 = EDGE_LOOP('',(#459833,#459843,#459851,#459859,#459867)); +#459833 = ORIENTED_EDGE('',*,*,#459834,.T.); +#459834 = EDGE_CURVE('',#459835,#459837,#459839,.T.); +#459835 = VERTEX_POINT('',#459836); +#459836 = CARTESIAN_POINT('',(129.434594,-141.324953,-7.5E-02)); +#459837 = VERTEX_POINT('',#459838); +#459838 = CARTESIAN_POINT('',(129.434594,-141.036862,-7.5E-02)); +#459839 = LINE('',#459840,#459841); +#459840 = CARTESIAN_POINT('',(129.434594,-141.324953,-7.5E-02)); +#459841 = VECTOR('',#459842,1.); +#459842 = DIRECTION('',(0.,1.,0.)); +#459843 = ORIENTED_EDGE('',*,*,#459844,.T.); +#459844 = EDGE_CURVE('',#459837,#459845,#459847,.T.); +#459845 = VERTEX_POINT('',#459846); +#459846 = CARTESIAN_POINT('',(129.146503,-141.036862,-7.5E-02)); +#459847 = LINE('',#459848,#459849); +#459848 = CARTESIAN_POINT('',(129.434594,-141.036862,-7.5E-02)); +#459849 = VECTOR('',#459850,1.); +#459850 = DIRECTION('',(-1.,0.,0.)); +#459851 = ORIENTED_EDGE('',*,*,#459852,.T.); +#459852 = EDGE_CURVE('',#459845,#459853,#459855,.T.); +#459853 = VERTEX_POINT('',#459854); +#459854 = CARTESIAN_POINT('',(129.146503,-141.180907,-7.5E-02)); +#459855 = LINE('',#459856,#459857); +#459856 = CARTESIAN_POINT('',(129.146503,-141.036862,-7.5E-02)); +#459857 = VECTOR('',#459858,1.); +#459858 = DIRECTION('',(0.,-1.,0.)); +#459859 = ORIENTED_EDGE('',*,*,#459860,.T.); +#459860 = EDGE_CURVE('',#459853,#459861,#459863,.T.); +#459861 = VERTEX_POINT('',#459862); +#459862 = CARTESIAN_POINT('',(129.146503,-141.324953,-7.5E-02)); +#459863 = LINE('',#459864,#459865); +#459864 = CARTESIAN_POINT('',(129.146503,-141.180907,-7.5E-02)); +#459865 = VECTOR('',#459866,1.); +#459866 = DIRECTION('',(0.,-1.,0.)); +#459867 = ORIENTED_EDGE('',*,*,#459868,.T.); +#459868 = EDGE_CURVE('',#459861,#459835,#459869,.T.); +#459869 = LINE('',#459870,#459871); +#459870 = CARTESIAN_POINT('',(129.146503,-141.324953,-7.5E-02)); +#459871 = VECTOR('',#459872,1.); +#459872 = DIRECTION('',(1.,0.,0.)); +#459873 = FACE_BOUND('',#459874,.T.); +#459874 = EDGE_LOOP('',(#459875,#459885,#459893,#459901,#459909)); +#459875 = ORIENTED_EDGE('',*,*,#459876,.T.); +#459876 = EDGE_CURVE('',#459877,#459879,#459881,.T.); +#459877 = VERTEX_POINT('',#459878); +#459878 = CARTESIAN_POINT('',(132.02741,-139.020227,-7.5E-02)); +#459879 = VERTEX_POINT('',#459880); +#459880 = CARTESIAN_POINT('',(132.02741,-138.732136,-7.5E-02)); +#459881 = LINE('',#459882,#459883); +#459882 = CARTESIAN_POINT('',(132.02741,-139.020227,-7.5E-02)); +#459883 = VECTOR('',#459884,1.); +#459884 = DIRECTION('',(0.,1.,0.)); +#459885 = ORIENTED_EDGE('',*,*,#459886,.T.); +#459886 = EDGE_CURVE('',#459879,#459887,#459889,.T.); +#459887 = VERTEX_POINT('',#459888); +#459888 = CARTESIAN_POINT('',(131.73932,-138.732136,-7.5E-02)); +#459889 = LINE('',#459890,#459891); +#459890 = CARTESIAN_POINT('',(132.02741,-138.732136,-7.5E-02)); +#459891 = VECTOR('',#459892,1.); +#459892 = DIRECTION('',(-1.,0.,0.)); +#459893 = ORIENTED_EDGE('',*,*,#459894,.T.); +#459894 = EDGE_CURVE('',#459887,#459895,#459897,.T.); +#459895 = VERTEX_POINT('',#459896); +#459896 = CARTESIAN_POINT('',(131.73932,-138.876181,-7.5E-02)); +#459897 = LINE('',#459898,#459899); +#459898 = CARTESIAN_POINT('',(131.73932,-138.732136,-7.5E-02)); +#459899 = VECTOR('',#459900,1.); +#459900 = DIRECTION('',(0.,-1.,0.)); +#459901 = ORIENTED_EDGE('',*,*,#459902,.T.); +#459902 = EDGE_CURVE('',#459895,#459903,#459905,.T.); +#459903 = VERTEX_POINT('',#459904); +#459904 = CARTESIAN_POINT('',(131.73932,-139.020227,-7.5E-02)); +#459905 = LINE('',#459906,#459907); +#459906 = CARTESIAN_POINT('',(131.73932,-138.876181,-7.5E-02)); +#459907 = VECTOR('',#459908,1.); +#459908 = DIRECTION('',(0.,-1.,0.)); +#459909 = ORIENTED_EDGE('',*,*,#459910,.T.); +#459910 = EDGE_CURVE('',#459903,#459877,#459911,.T.); +#459911 = LINE('',#459912,#459913); +#459912 = CARTESIAN_POINT('',(131.73932,-139.020227,-7.5E-02)); +#459913 = VECTOR('',#459914,1.); +#459914 = DIRECTION('',(1.,0.,0.)); +#459915 = FACE_BOUND('',#459916,.T.); +#459916 = EDGE_LOOP('',(#459917,#459927,#459935,#459943)); +#459917 = ORIENTED_EDGE('',*,*,#459918,.T.); +#459918 = EDGE_CURVE('',#459919,#459921,#459923,.T.); +#459919 = VERTEX_POINT('',#459920); +#459920 = CARTESIAN_POINT('',(132.603592,-139.020227,-7.5E-02)); +#459921 = VERTEX_POINT('',#459922); +#459922 = CARTESIAN_POINT('',(132.603592,-138.732136,-7.5E-02)); +#459923 = LINE('',#459924,#459925); +#459924 = CARTESIAN_POINT('',(132.603592,-139.020227,-7.5E-02)); +#459925 = VECTOR('',#459926,1.); +#459926 = DIRECTION('',(0.,1.,0.)); +#459927 = ORIENTED_EDGE('',*,*,#459928,.T.); +#459928 = EDGE_CURVE('',#459921,#459929,#459931,.T.); +#459929 = VERTEX_POINT('',#459930); +#459930 = CARTESIAN_POINT('',(132.315501,-138.732136,-7.5E-02)); +#459931 = LINE('',#459932,#459933); +#459932 = CARTESIAN_POINT('',(132.603592,-138.732136,-7.5E-02)); +#459933 = VECTOR('',#459934,1.); +#459934 = DIRECTION('',(-1.,0.,0.)); +#459935 = ORIENTED_EDGE('',*,*,#459936,.T.); +#459936 = EDGE_CURVE('',#459929,#459937,#459939,.T.); +#459937 = VERTEX_POINT('',#459938); +#459938 = CARTESIAN_POINT('',(132.315501,-139.020227,-7.5E-02)); +#459939 = LINE('',#459940,#459941); +#459940 = CARTESIAN_POINT('',(132.315501,-138.732136,-7.5E-02)); +#459941 = VECTOR('',#459942,1.); +#459942 = DIRECTION('',(0.,-1.,0.)); +#459943 = ORIENTED_EDGE('',*,*,#459944,.T.); +#459944 = EDGE_CURVE('',#459937,#459919,#459945,.T.); +#459945 = LINE('',#459946,#459947); +#459946 = CARTESIAN_POINT('',(132.315501,-139.020227,-7.5E-02)); +#459947 = VECTOR('',#459948,1.); +#459948 = DIRECTION('',(1.,0.,0.)); +#459949 = FACE_BOUND('',#459950,.T.); +#459950 = EDGE_LOOP('',(#459951,#459961,#459969,#459977,#459985,#459993, + #460001,#460009,#460015,#460023,#460031,#460039,#460047,#460055, + #460063,#460071,#460077,#460083,#460091)); +#459951 = ORIENTED_EDGE('',*,*,#459952,.T.); +#459952 = EDGE_CURVE('',#459953,#459955,#459957,.T.); +#459953 = VERTEX_POINT('',#459954); +#459954 = CARTESIAN_POINT('',(131.163138,-137.867864,-7.5E-02)); +#459955 = VERTEX_POINT('',#459956); +#459956 = CARTESIAN_POINT('',(131.163138,-137.579773,-7.5E-02)); +#459957 = LINE('',#459958,#459959); +#459958 = CARTESIAN_POINT('',(131.163138,-137.867864,-7.5E-02)); +#459959 = VECTOR('',#459960,1.); +#459960 = DIRECTION('',(0.,1.,0.)); +#459961 = ORIENTED_EDGE('',*,*,#459962,.T.); +#459962 = EDGE_CURVE('',#459955,#459963,#459965,.T.); +#459963 = VERTEX_POINT('',#459964); +#459964 = CARTESIAN_POINT('',(130.586957,-137.579773,-7.5E-02)); +#459965 = LINE('',#459966,#459967); +#459966 = CARTESIAN_POINT('',(131.163138,-137.579773,-7.5E-02)); +#459967 = VECTOR('',#459968,1.); +#459968 = DIRECTION('',(-1.,0.,0.)); +#459969 = ORIENTED_EDGE('',*,*,#459970,.T.); +#459970 = EDGE_CURVE('',#459963,#459971,#459973,.T.); +#459971 = VERTEX_POINT('',#459972); +#459972 = CARTESIAN_POINT('',(130.586957,-138.011909,-7.5E-02)); +#459973 = LINE('',#459974,#459975); +#459974 = CARTESIAN_POINT('',(130.586957,-137.579773,-7.5E-02)); +#459975 = VECTOR('',#459976,1.); +#459976 = DIRECTION('',(0.,-1.,0.)); +#459977 = ORIENTED_EDGE('',*,*,#459978,.T.); +#459978 = EDGE_CURVE('',#459971,#459979,#459981,.T.); +#459979 = VERTEX_POINT('',#459980); +#459980 = CARTESIAN_POINT('',(130.586957,-138.444045,-7.5E-02)); +#459981 = LINE('',#459982,#459983); +#459982 = CARTESIAN_POINT('',(130.586957,-138.011909,-7.5E-02)); +#459983 = VECTOR('',#459984,1.); +#459984 = DIRECTION('',(0.,-1.,0.)); +#459985 = ORIENTED_EDGE('',*,*,#459986,.T.); +#459986 = EDGE_CURVE('',#459979,#459987,#459989,.T.); +#459987 = VERTEX_POINT('',#459988); +#459988 = CARTESIAN_POINT('',(130.298866,-138.444045,-7.5E-02)); +#459989 = LINE('',#459990,#459991); +#459990 = CARTESIAN_POINT('',(130.586957,-138.444045,-7.5E-02)); +#459991 = VECTOR('',#459992,1.); +#459992 = DIRECTION('',(-1.,0.,0.)); +#459993 = ORIENTED_EDGE('',*,*,#459994,.T.); +#459994 = EDGE_CURVE('',#459987,#459995,#459997,.T.); +#459995 = VERTEX_POINT('',#459996); +#459996 = CARTESIAN_POINT('',(130.298866,-138.732136,-7.5E-02)); +#459997 = LINE('',#459998,#459999); +#459998 = CARTESIAN_POINT('',(130.298866,-138.444045,-7.5E-02)); +#459999 = VECTOR('',#460000,1.); +#460000 = DIRECTION('',(0.,-1.,0.)); +#460001 = ORIENTED_EDGE('',*,*,#460002,.T.); +#460002 = EDGE_CURVE('',#459995,#460003,#460005,.T.); +#460003 = VERTEX_POINT('',#460004); +#460004 = CARTESIAN_POINT('',(130.586957,-138.732136,-7.5E-02)); +#460005 = LINE('',#460006,#460007); +#460006 = CARTESIAN_POINT('',(130.298866,-138.732136,-7.5E-02)); +#460007 = VECTOR('',#460008,1.); +#460008 = DIRECTION('',(1.,0.,0.)); +#460009 = ORIENTED_EDGE('',*,*,#460010,.T.); +#460010 = EDGE_CURVE('',#460003,#459979,#460011,.T.); +#460011 = LINE('',#460012,#460013); +#460012 = CARTESIAN_POINT('',(130.586957,-138.732136,-7.5E-02)); +#460013 = VECTOR('',#460014,1.); +#460014 = DIRECTION('',(0.,1.,0.)); +#460015 = ORIENTED_EDGE('',*,*,#460016,.T.); +#460016 = EDGE_CURVE('',#459979,#460017,#460019,.T.); +#460017 = VERTEX_POINT('',#460018); +#460018 = CARTESIAN_POINT('',(130.875047,-138.444045,-7.5E-02)); +#460019 = LINE('',#460020,#460021); +#460020 = CARTESIAN_POINT('',(130.586957,-138.444045,-7.5E-02)); +#460021 = VECTOR('',#460022,1.); +#460022 = DIRECTION('',(1.,0.,0.)); +#460023 = ORIENTED_EDGE('',*,*,#460024,.T.); +#460024 = EDGE_CURVE('',#460017,#460025,#460027,.T.); +#460025 = VERTEX_POINT('',#460026); +#460026 = CARTESIAN_POINT('',(130.875047,-138.732136,-7.5E-02)); +#460027 = LINE('',#460028,#460029); +#460028 = CARTESIAN_POINT('',(130.875047,-138.444045,-7.5E-02)); +#460029 = VECTOR('',#460030,1.); +#460030 = DIRECTION('',(0.,-1.,0.)); +#460031 = ORIENTED_EDGE('',*,*,#460032,.T.); +#460032 = EDGE_CURVE('',#460025,#460033,#460035,.T.); +#460033 = VERTEX_POINT('',#460034); +#460034 = CARTESIAN_POINT('',(131.451229,-138.732136,-7.5E-02)); +#460035 = LINE('',#460036,#460037); +#460036 = CARTESIAN_POINT('',(130.875047,-138.732136,-7.5E-02)); +#460037 = VECTOR('',#460038,1.); +#460038 = DIRECTION('',(1.,0.,0.)); +#460039 = ORIENTED_EDGE('',*,*,#460040,.T.); +#460040 = EDGE_CURVE('',#460033,#460041,#460043,.T.); +#460041 = VERTEX_POINT('',#460042); +#460042 = CARTESIAN_POINT('',(131.451229,-138.444045,-7.5E-02)); +#460043 = LINE('',#460044,#460045); +#460044 = CARTESIAN_POINT('',(131.451229,-138.732136,-7.5E-02)); +#460045 = VECTOR('',#460046,1.); +#460046 = DIRECTION('',(0.,1.,0.)); +#460047 = ORIENTED_EDGE('',*,*,#460048,.T.); +#460048 = EDGE_CURVE('',#460041,#460049,#460051,.T.); +#460049 = VERTEX_POINT('',#460050); +#460050 = CARTESIAN_POINT('',(131.73932,-138.444045,-7.5E-02)); +#460051 = LINE('',#460052,#460053); +#460052 = CARTESIAN_POINT('',(131.451229,-138.444045,-7.5E-02)); +#460053 = VECTOR('',#460054,1.); +#460054 = DIRECTION('',(1.,0.,0.)); +#460055 = ORIENTED_EDGE('',*,*,#460056,.T.); +#460056 = EDGE_CURVE('',#460049,#460057,#460059,.T.); +#460057 = VERTEX_POINT('',#460058); +#460058 = CARTESIAN_POINT('',(131.73932,-138.155954,-7.5E-02)); +#460059 = LINE('',#460060,#460061); +#460060 = CARTESIAN_POINT('',(131.73932,-138.444045,-7.5E-02)); +#460061 = VECTOR('',#460062,1.); +#460062 = DIRECTION('',(0.,1.,0.)); +#460063 = ORIENTED_EDGE('',*,*,#460064,.T.); +#460064 = EDGE_CURVE('',#460057,#460065,#460067,.T.); +#460065 = VERTEX_POINT('',#460066); +#460066 = CARTESIAN_POINT('',(131.451229,-138.155954,-7.5E-02)); +#460067 = LINE('',#460068,#460069); +#460068 = CARTESIAN_POINT('',(131.73932,-138.155954,-7.5E-02)); +#460069 = VECTOR('',#460070,1.); +#460070 = DIRECTION('',(-1.,0.,0.)); +#460071 = ORIENTED_EDGE('',*,*,#460072,.T.); +#460072 = EDGE_CURVE('',#460065,#460041,#460073,.T.); +#460073 = LINE('',#460074,#460075); +#460074 = CARTESIAN_POINT('',(131.451229,-138.155954,-7.5E-02)); +#460075 = VECTOR('',#460076,1.); +#460076 = DIRECTION('',(0.,-1.,0.)); +#460077 = ORIENTED_EDGE('',*,*,#460078,.T.); +#460078 = EDGE_CURVE('',#460041,#460017,#460079,.T.); +#460079 = LINE('',#460080,#460081); +#460080 = CARTESIAN_POINT('',(131.451229,-138.444045,-7.5E-02)); +#460081 = VECTOR('',#460082,1.); +#460082 = DIRECTION('',(-1.,0.,0.)); +#460083 = ORIENTED_EDGE('',*,*,#460084,.T.); +#460084 = EDGE_CURVE('',#460017,#460085,#460087,.T.); +#460085 = VERTEX_POINT('',#460086); +#460086 = CARTESIAN_POINT('',(130.875047,-137.867864,-7.5E-02)); +#460087 = LINE('',#460088,#460089); +#460088 = CARTESIAN_POINT('',(130.875047,-138.444045,-7.5E-02)); +#460089 = VECTOR('',#460090,1.); +#460090 = DIRECTION('',(0.,1.,0.)); +#460091 = ORIENTED_EDGE('',*,*,#460092,.T.); +#460092 = EDGE_CURVE('',#460085,#459953,#460093,.T.); +#460093 = LINE('',#460094,#460095); +#460094 = CARTESIAN_POINT('',(130.875047,-137.867864,-7.5E-02)); +#460095 = VECTOR('',#460096,1.); +#460096 = DIRECTION('',(1.,0.,0.)); +#460097 = FACE_BOUND('',#460098,.T.); +#460098 = EDGE_LOOP('',(#460099,#460109,#460117,#460125,#460133)); +#460099 = ORIENTED_EDGE('',*,*,#460100,.T.); +#460100 = EDGE_CURVE('',#460101,#460103,#460105,.T.); +#460101 = VERTEX_POINT('',#460102); +#460102 = CARTESIAN_POINT('',(130.298866,-138.155954,-7.5E-02)); +#460103 = VERTEX_POINT('',#460104); +#460104 = CARTESIAN_POINT('',(130.298866,-137.579773,-7.5E-02)); +#460105 = LINE('',#460106,#460107); +#460106 = CARTESIAN_POINT('',(130.298866,-138.155954,-7.5E-02)); +#460107 = VECTOR('',#460108,1.); +#460108 = DIRECTION('',(0.,1.,0.)); +#460109 = ORIENTED_EDGE('',*,*,#460110,.T.); +#460110 = EDGE_CURVE('',#460103,#460111,#460113,.T.); +#460111 = VERTEX_POINT('',#460112); +#460112 = CARTESIAN_POINT('',(130.010775,-137.579773,-7.5E-02)); +#460113 = LINE('',#460114,#460115); +#460114 = CARTESIAN_POINT('',(130.298866,-137.579773,-7.5E-02)); +#460115 = VECTOR('',#460116,1.); +#460116 = DIRECTION('',(-1.,0.,0.)); +#460117 = ORIENTED_EDGE('',*,*,#460118,.T.); +#460118 = EDGE_CURVE('',#460111,#460119,#460121,.T.); +#460119 = VERTEX_POINT('',#460120); +#460120 = CARTESIAN_POINT('',(130.010775,-137.867864,-7.5E-02)); +#460121 = LINE('',#460122,#460123); +#460122 = CARTESIAN_POINT('',(130.010775,-137.579773,-7.5E-02)); +#460123 = VECTOR('',#460124,1.); +#460124 = DIRECTION('',(0.,-1.,0.)); +#460125 = ORIENTED_EDGE('',*,*,#460126,.T.); +#460126 = EDGE_CURVE('',#460119,#460127,#460129,.T.); +#460127 = VERTEX_POINT('',#460128); +#460128 = CARTESIAN_POINT('',(130.010775,-138.155954,-7.5E-02)); +#460129 = LINE('',#460130,#460131); +#460130 = CARTESIAN_POINT('',(130.010775,-137.867864,-7.5E-02)); +#460131 = VECTOR('',#460132,1.); +#460132 = DIRECTION('',(0.,-1.,0.)); +#460133 = ORIENTED_EDGE('',*,*,#460134,.T.); +#460134 = EDGE_CURVE('',#460127,#460101,#460135,.T.); +#460135 = LINE('',#460136,#460137); +#460136 = CARTESIAN_POINT('',(130.010775,-138.155954,-7.5E-02)); +#460137 = VECTOR('',#460138,1.); +#460138 = DIRECTION('',(1.,0.,0.)); +#460139 = FACE_BOUND('',#460140,.T.); +#460140 = EDGE_LOOP('',(#460141,#460151,#460159,#460167,#460175)); +#460141 = ORIENTED_EDGE('',*,*,#460142,.T.); +#460142 = EDGE_CURVE('',#460143,#460145,#460147,.T.); +#460143 = VERTEX_POINT('',#460144); +#460144 = CARTESIAN_POINT('',(132.315501,-138.155954,-7.5E-02)); +#460145 = VERTEX_POINT('',#460146); +#460146 = CARTESIAN_POINT('',(132.315501,-137.867864,-7.5E-02)); +#460147 = LINE('',#460148,#460149); +#460148 = CARTESIAN_POINT('',(132.315501,-138.155954,-7.5E-02)); +#460149 = VECTOR('',#460150,1.); +#460150 = DIRECTION('',(0.,1.,0.)); +#460151 = ORIENTED_EDGE('',*,*,#460152,.T.); +#460152 = EDGE_CURVE('',#460145,#460153,#460155,.T.); +#460153 = VERTEX_POINT('',#460154); +#460154 = CARTESIAN_POINT('',(132.02741,-137.867864,-7.5E-02)); +#460155 = LINE('',#460156,#460157); +#460156 = CARTESIAN_POINT('',(132.315501,-137.867864,-7.5E-02)); +#460157 = VECTOR('',#460158,1.); +#460158 = DIRECTION('',(-1.,0.,0.)); +#460159 = ORIENTED_EDGE('',*,*,#460160,.T.); +#460160 = EDGE_CURVE('',#460153,#460161,#460163,.T.); +#460161 = VERTEX_POINT('',#460162); +#460162 = CARTESIAN_POINT('',(132.02741,-138.155954,-7.5E-02)); +#460163 = LINE('',#460164,#460165); +#460164 = CARTESIAN_POINT('',(132.02741,-137.867864,-7.5E-02)); +#460165 = VECTOR('',#460166,1.); +#460166 = DIRECTION('',(0.,-1.,0.)); +#460167 = ORIENTED_EDGE('',*,*,#460168,.T.); +#460168 = EDGE_CURVE('',#460161,#460169,#460171,.T.); +#460169 = VERTEX_POINT('',#460170); +#460170 = CARTESIAN_POINT('',(132.171456,-138.155954,-7.5E-02)); +#460171 = LINE('',#460172,#460173); +#460172 = CARTESIAN_POINT('',(132.02741,-138.155954,-7.5E-02)); +#460173 = VECTOR('',#460174,1.); +#460174 = DIRECTION('',(1.,0.,0.)); +#460175 = ORIENTED_EDGE('',*,*,#460176,.T.); +#460176 = EDGE_CURVE('',#460169,#460143,#460177,.T.); +#460177 = LINE('',#460178,#460179); +#460178 = CARTESIAN_POINT('',(132.171456,-138.155954,-7.5E-02)); +#460179 = VECTOR('',#460180,1.); +#460180 = DIRECTION('',(1.,0.,0.)); +#460181 = PLANE('',#460182); +#460182 = AXIS2_PLACEMENT_3D('',#460183,#460184,#460185); +#460183 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460184 = DIRECTION('',(-0.,-0.,-1.)); +#460185 = DIRECTION('',(-1.,0.,0.)); +#460186 = SHELL_BASED_SURFACE_MODEL('',(#460187)); +#460187 = OPEN_SHELL('',(#460188)); +#460188 = ADVANCED_FACE('',(#460189),#460231,.T.); +#460189 = FACE_BOUND('',#460190,.T.); +#460190 = EDGE_LOOP('',(#460191,#460201,#460209,#460217,#460225)); +#460191 = ORIENTED_EDGE('',*,*,#460192,.T.); +#460192 = EDGE_CURVE('',#460193,#460195,#460197,.T.); +#460193 = VERTEX_POINT('',#460194); +#460194 = CARTESIAN_POINT('',(133.179773,-143.629678,-7.5E-02)); +#460195 = VERTEX_POINT('',#460196); +#460196 = CARTESIAN_POINT('',(133.179773,-143.341588,-7.5E-02)); +#460197 = LINE('',#460198,#460199); +#460198 = CARTESIAN_POINT('',(133.179773,-143.629678,-7.5E-02)); +#460199 = VECTOR('',#460200,1.); +#460200 = DIRECTION('',(0.,1.,0.)); +#460201 = ORIENTED_EDGE('',*,*,#460202,.T.); +#460202 = EDGE_CURVE('',#460195,#460203,#460205,.T.); +#460203 = VERTEX_POINT('',#460204); +#460204 = CARTESIAN_POINT('',(133.467864,-143.341588,-7.5E-02)); +#460205 = LINE('',#460206,#460207); +#460206 = CARTESIAN_POINT('',(133.179773,-143.341588,-7.5E-02)); +#460207 = VECTOR('',#460208,1.); +#460208 = DIRECTION('',(1.,0.,0.)); +#460209 = ORIENTED_EDGE('',*,*,#460210,.T.); +#460210 = EDGE_CURVE('',#460203,#460211,#460213,.T.); +#460211 = VERTEX_POINT('',#460212); +#460212 = CARTESIAN_POINT('',(133.467864,-143.485633,-7.5E-02)); +#460213 = LINE('',#460214,#460215); +#460214 = CARTESIAN_POINT('',(133.467864,-143.341588,-7.5E-02)); +#460215 = VECTOR('',#460216,1.); +#460216 = DIRECTION('',(0.,-1.,0.)); +#460217 = ORIENTED_EDGE('',*,*,#460218,.T.); +#460218 = EDGE_CURVE('',#460211,#460219,#460221,.T.); +#460219 = VERTEX_POINT('',#460220); +#460220 = CARTESIAN_POINT('',(133.467864,-143.629678,-7.5E-02)); +#460221 = LINE('',#460222,#460223); +#460222 = CARTESIAN_POINT('',(133.467864,-143.485633,-7.5E-02)); +#460223 = VECTOR('',#460224,1.); +#460224 = DIRECTION('',(0.,-1.,0.)); +#460225 = ORIENTED_EDGE('',*,*,#460226,.T.); +#460226 = EDGE_CURVE('',#460219,#460193,#460227,.T.); +#460227 = LINE('',#460228,#460229); +#460228 = CARTESIAN_POINT('',(133.467864,-143.629678,-7.5E-02)); +#460229 = VECTOR('',#460230,1.); +#460230 = DIRECTION('',(-1.,0.,0.)); +#460231 = PLANE('',#460232); +#460232 = AXIS2_PLACEMENT_3D('',#460233,#460234,#460235); +#460233 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460234 = DIRECTION('',(-0.,-0.,-1.)); +#460235 = DIRECTION('',(-1.,0.,0.)); +#460236 = SHELL_BASED_SURFACE_MODEL('',(#460237)); +#460237 = OPEN_SHELL('',(#460238)); +#460238 = ADVANCED_FACE('',(#460239),#460281,.T.); +#460239 = FACE_BOUND('',#460240,.T.); +#460240 = EDGE_LOOP('',(#460241,#460251,#460259,#460267,#460275)); +#460241 = ORIENTED_EDGE('',*,*,#460242,.T.); +#460242 = EDGE_CURVE('',#460243,#460245,#460247,.T.); +#460243 = VERTEX_POINT('',#460244); +#460244 = CARTESIAN_POINT('',(133.755955,-143.629678,-7.5E-02)); +#460245 = VERTEX_POINT('',#460246); +#460246 = CARTESIAN_POINT('',(133.755955,-142.765406,-7.5E-02)); +#460247 = LINE('',#460248,#460249); +#460248 = CARTESIAN_POINT('',(133.755955,-143.629678,-7.5E-02)); +#460249 = VECTOR('',#460250,1.); +#460250 = DIRECTION('',(0.,1.,0.)); +#460251 = ORIENTED_EDGE('',*,*,#460252,.T.); +#460252 = EDGE_CURVE('',#460245,#460253,#460255,.T.); +#460253 = VERTEX_POINT('',#460254); +#460254 = CARTESIAN_POINT('',(134.044046,-142.765406,-7.5E-02)); +#460255 = LINE('',#460256,#460257); +#460256 = CARTESIAN_POINT('',(133.755955,-142.765406,-7.5E-02)); +#460257 = VECTOR('',#460258,1.); +#460258 = DIRECTION('',(1.,0.,0.)); +#460259 = ORIENTED_EDGE('',*,*,#460260,.T.); +#460260 = EDGE_CURVE('',#460253,#460261,#460263,.T.); +#460261 = VERTEX_POINT('',#460262); +#460262 = CARTESIAN_POINT('',(134.044046,-143.197542,-7.5E-02)); +#460263 = LINE('',#460264,#460265); +#460264 = CARTESIAN_POINT('',(134.044046,-142.765406,-7.5E-02)); +#460265 = VECTOR('',#460266,1.); +#460266 = DIRECTION('',(0.,-1.,0.)); +#460267 = ORIENTED_EDGE('',*,*,#460268,.T.); +#460268 = EDGE_CURVE('',#460261,#460269,#460271,.T.); +#460269 = VERTEX_POINT('',#460270); +#460270 = CARTESIAN_POINT('',(134.044046,-143.629678,-7.5E-02)); +#460271 = LINE('',#460272,#460273); +#460272 = CARTESIAN_POINT('',(134.044046,-143.197542,-7.5E-02)); +#460273 = VECTOR('',#460274,1.); +#460274 = DIRECTION('',(0.,-1.,0.)); +#460275 = ORIENTED_EDGE('',*,*,#460276,.T.); +#460276 = EDGE_CURVE('',#460269,#460243,#460277,.T.); +#460277 = LINE('',#460278,#460279); +#460278 = CARTESIAN_POINT('',(134.044046,-143.629678,-7.5E-02)); +#460279 = VECTOR('',#460280,1.); +#460280 = DIRECTION('',(-1.,0.,0.)); +#460281 = PLANE('',#460282); +#460282 = AXIS2_PLACEMENT_3D('',#460283,#460284,#460285); +#460283 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460284 = DIRECTION('',(-0.,-0.,-1.)); +#460285 = DIRECTION('',(-1.,0.,0.)); +#460286 = SHELL_BASED_SURFACE_MODEL('',(#460287)); +#460287 = OPEN_SHELL('',(#460288)); +#460288 = ADVANCED_FACE('',(#460289),#460331,.T.); +#460289 = FACE_BOUND('',#460290,.T.); +#460290 = EDGE_LOOP('',(#460291,#460301,#460309,#460317,#460325)); +#460291 = ORIENTED_EDGE('',*,*,#460292,.T.); +#460292 = EDGE_CURVE('',#460293,#460295,#460297,.T.); +#460293 = VERTEX_POINT('',#460294); +#460294 = CARTESIAN_POINT('',(134.908318,-143.629678,-7.5E-02)); +#460295 = VERTEX_POINT('',#460296); +#460296 = CARTESIAN_POINT('',(134.908318,-143.053497,-7.5E-02)); +#460297 = LINE('',#460298,#460299); +#460298 = CARTESIAN_POINT('',(134.908318,-143.629678,-7.5E-02)); +#460299 = VECTOR('',#460300,1.); +#460300 = DIRECTION('',(0.,1.,0.)); +#460301 = ORIENTED_EDGE('',*,*,#460302,.T.); +#460302 = EDGE_CURVE('',#460295,#460303,#460305,.T.); +#460303 = VERTEX_POINT('',#460304); +#460304 = CARTESIAN_POINT('',(135.196408,-143.053497,-7.5E-02)); +#460305 = LINE('',#460306,#460307); +#460306 = CARTESIAN_POINT('',(134.908318,-143.053497,-7.5E-02)); +#460307 = VECTOR('',#460308,1.); +#460308 = DIRECTION('',(1.,0.,0.)); +#460309 = ORIENTED_EDGE('',*,*,#460310,.T.); +#460310 = EDGE_CURVE('',#460303,#460311,#460313,.T.); +#460311 = VERTEX_POINT('',#460312); +#460312 = CARTESIAN_POINT('',(135.196408,-143.341588,-7.5E-02)); +#460313 = LINE('',#460314,#460315); +#460314 = CARTESIAN_POINT('',(135.196408,-143.053497,-7.5E-02)); +#460315 = VECTOR('',#460316,1.); +#460316 = DIRECTION('',(0.,-1.,0.)); +#460317 = ORIENTED_EDGE('',*,*,#460318,.T.); +#460318 = EDGE_CURVE('',#460311,#460319,#460321,.T.); +#460319 = VERTEX_POINT('',#460320); +#460320 = CARTESIAN_POINT('',(135.196408,-143.629678,-7.5E-02)); +#460321 = LINE('',#460322,#460323); +#460322 = CARTESIAN_POINT('',(135.196408,-143.341588,-7.5E-02)); +#460323 = VECTOR('',#460324,1.); +#460324 = DIRECTION('',(0.,-1.,0.)); +#460325 = ORIENTED_EDGE('',*,*,#460326,.T.); +#460326 = EDGE_CURVE('',#460319,#460293,#460327,.T.); +#460327 = LINE('',#460328,#460329); +#460328 = CARTESIAN_POINT('',(135.196408,-143.629678,-7.5E-02)); +#460329 = VECTOR('',#460330,1.); +#460330 = DIRECTION('',(-1.,0.,0.)); +#460331 = PLANE('',#460332); +#460332 = AXIS2_PLACEMENT_3D('',#460333,#460334,#460335); +#460333 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460334 = DIRECTION('',(-0.,-0.,-1.)); +#460335 = DIRECTION('',(-1.,0.,0.)); +#460336 = SHELL_BASED_SURFACE_MODEL('',(#460337)); +#460337 = OPEN_SHELL('',(#460338)); +#460338 = ADVANCED_FACE('',(#460339),#460555,.T.); +#460339 = FACE_BOUND('',#460340,.T.); +#460340 = EDGE_LOOP('',(#460341,#460351,#460359,#460367,#460375,#460383, + #460391,#460399,#460407,#460415,#460423,#460431,#460439,#460447, + #460453,#460461,#460469,#460477,#460485,#460493,#460501,#460509, + #460517,#460525,#460533,#460541,#460549)); +#460341 = ORIENTED_EDGE('',*,*,#460342,.T.); +#460342 = EDGE_CURVE('',#460343,#460345,#460347,.T.); +#460343 = VERTEX_POINT('',#460344); +#460344 = CARTESIAN_POINT('',(134.620227,-141.901134,-7.5E-02)); +#460345 = VERTEX_POINT('',#460346); +#460346 = CARTESIAN_POINT('',(134.764272,-141.901134,-7.5E-02)); +#460347 = LINE('',#460348,#460349); +#460348 = CARTESIAN_POINT('',(134.620227,-141.901134,-7.5E-02)); +#460349 = VECTOR('',#460350,1.); +#460350 = DIRECTION('',(1.,0.,0.)); +#460351 = ORIENTED_EDGE('',*,*,#460352,.T.); +#460352 = EDGE_CURVE('',#460345,#460353,#460355,.T.); +#460353 = VERTEX_POINT('',#460354); +#460354 = CARTESIAN_POINT('',(134.908318,-141.901134,-7.5E-02)); +#460355 = LINE('',#460356,#460357); +#460356 = CARTESIAN_POINT('',(134.764272,-141.901134,-7.5E-02)); +#460357 = VECTOR('',#460358,1.); +#460358 = DIRECTION('',(1.,0.,0.)); +#460359 = ORIENTED_EDGE('',*,*,#460360,.T.); +#460360 = EDGE_CURVE('',#460353,#460361,#460363,.T.); +#460361 = VERTEX_POINT('',#460362); +#460362 = CARTESIAN_POINT('',(134.908318,-142.189225,-7.5E-02)); +#460363 = LINE('',#460364,#460365); +#460364 = CARTESIAN_POINT('',(134.908318,-141.901134,-7.5E-02)); +#460365 = VECTOR('',#460366,1.); +#460366 = DIRECTION('',(0.,-1.,0.)); +#460367 = ORIENTED_EDGE('',*,*,#460368,.T.); +#460368 = EDGE_CURVE('',#460361,#460369,#460371,.T.); +#460369 = VERTEX_POINT('',#460370); +#460370 = CARTESIAN_POINT('',(135.196408,-142.189225,-7.5E-02)); +#460371 = LINE('',#460372,#460373); +#460372 = CARTESIAN_POINT('',(134.908318,-142.189225,-7.5E-02)); +#460373 = VECTOR('',#460374,1.); +#460374 = DIRECTION('',(1.,0.,0.)); +#460375 = ORIENTED_EDGE('',*,*,#460376,.T.); +#460376 = EDGE_CURVE('',#460369,#460377,#460379,.T.); +#460377 = VERTEX_POINT('',#460378); +#460378 = CARTESIAN_POINT('',(135.196408,-142.477316,-7.5E-02)); +#460379 = LINE('',#460380,#460381); +#460380 = CARTESIAN_POINT('',(135.196408,-142.189225,-7.5E-02)); +#460381 = VECTOR('',#460382,1.); +#460382 = DIRECTION('',(0.,-1.,0.)); +#460383 = ORIENTED_EDGE('',*,*,#460384,.T.); +#460384 = EDGE_CURVE('',#460377,#460385,#460387,.T.); +#460385 = VERTEX_POINT('',#460386); +#460386 = CARTESIAN_POINT('',(135.484499,-142.477316,-7.5E-02)); +#460387 = LINE('',#460388,#460389); +#460388 = CARTESIAN_POINT('',(135.196408,-142.477316,-7.5E-02)); +#460389 = VECTOR('',#460390,1.); +#460390 = DIRECTION('',(1.,0.,0.)); +#460391 = ORIENTED_EDGE('',*,*,#460392,.T.); +#460392 = EDGE_CURVE('',#460385,#460393,#460395,.T.); +#460393 = VERTEX_POINT('',#460394); +#460394 = CARTESIAN_POINT('',(135.484499,-142.189225,-7.5E-02)); +#460395 = LINE('',#460396,#460397); +#460396 = CARTESIAN_POINT('',(135.484499,-142.477316,-7.5E-02)); +#460397 = VECTOR('',#460398,1.); +#460398 = DIRECTION('',(0.,1.,0.)); +#460399 = ORIENTED_EDGE('',*,*,#460400,.T.); +#460400 = EDGE_CURVE('',#460393,#460401,#460403,.T.); +#460401 = VERTEX_POINT('',#460402); +#460402 = CARTESIAN_POINT('',(135.77259,-142.189225,-7.5E-02)); +#460403 = LINE('',#460404,#460405); +#460404 = CARTESIAN_POINT('',(135.484499,-142.189225,-7.5E-02)); +#460405 = VECTOR('',#460406,1.); +#460406 = DIRECTION('',(1.,0.,0.)); +#460407 = ORIENTED_EDGE('',*,*,#460408,.T.); +#460408 = EDGE_CURVE('',#460401,#460409,#460411,.T.); +#460409 = VERTEX_POINT('',#460410); +#460410 = CARTESIAN_POINT('',(135.77259,-143.053497,-7.5E-02)); +#460411 = LINE('',#460412,#460413); +#460412 = CARTESIAN_POINT('',(135.77259,-142.189225,-7.5E-02)); +#460413 = VECTOR('',#460414,1.); +#460414 = DIRECTION('',(0.,-1.,0.)); +#460415 = ORIENTED_EDGE('',*,*,#460416,.T.); +#460416 = EDGE_CURVE('',#460409,#460417,#460419,.T.); +#460417 = VERTEX_POINT('',#460418); +#460418 = CARTESIAN_POINT('',(136.348771,-143.053497,-7.5E-02)); +#460419 = LINE('',#460420,#460421); +#460420 = CARTESIAN_POINT('',(135.77259,-143.053497,-7.5E-02)); +#460421 = VECTOR('',#460422,1.); +#460422 = DIRECTION('',(1.,0.,0.)); +#460423 = ORIENTED_EDGE('',*,*,#460424,.T.); +#460424 = EDGE_CURVE('',#460417,#460425,#460427,.T.); +#460425 = VERTEX_POINT('',#460426); +#460426 = CARTESIAN_POINT('',(136.348771,-142.765406,-7.5E-02)); +#460427 = LINE('',#460428,#460429); +#460428 = CARTESIAN_POINT('',(136.348771,-143.053497,-7.5E-02)); +#460429 = VECTOR('',#460430,1.); +#460430 = DIRECTION('',(0.,1.,0.)); +#460431 = ORIENTED_EDGE('',*,*,#460432,.T.); +#460432 = EDGE_CURVE('',#460425,#460433,#460435,.T.); +#460433 = VERTEX_POINT('',#460434); +#460434 = CARTESIAN_POINT('',(136.636862,-142.765406,-7.5E-02)); +#460435 = LINE('',#460436,#460437); +#460436 = CARTESIAN_POINT('',(136.348771,-142.765406,-7.5E-02)); +#460437 = VECTOR('',#460438,1.); +#460438 = DIRECTION('',(1.,0.,0.)); +#460439 = ORIENTED_EDGE('',*,*,#460440,.T.); +#460440 = EDGE_CURVE('',#460433,#460441,#460443,.T.); +#460441 = VERTEX_POINT('',#460442); +#460442 = CARTESIAN_POINT('',(136.636862,-143.053497,-7.5E-02)); +#460443 = LINE('',#460444,#460445); +#460444 = CARTESIAN_POINT('',(136.636862,-142.765406,-7.5E-02)); +#460445 = VECTOR('',#460446,1.); +#460446 = DIRECTION('',(0.,-1.,0.)); +#460447 = ORIENTED_EDGE('',*,*,#460448,.T.); +#460448 = EDGE_CURVE('',#460441,#460417,#460449,.T.); +#460449 = LINE('',#460450,#460451); +#460450 = CARTESIAN_POINT('',(136.636862,-143.053497,-7.5E-02)); +#460451 = VECTOR('',#460452,1.); +#460452 = DIRECTION('',(-1.,0.,0.)); +#460453 = ORIENTED_EDGE('',*,*,#460454,.T.); +#460454 = EDGE_CURVE('',#460417,#460455,#460457,.T.); +#460455 = VERTEX_POINT('',#460456); +#460456 = CARTESIAN_POINT('',(136.348771,-143.629678,-7.5E-02)); +#460457 = LINE('',#460458,#460459); +#460458 = CARTESIAN_POINT('',(136.348771,-143.053497,-7.5E-02)); +#460459 = VECTOR('',#460460,1.); +#460460 = DIRECTION('',(0.,-1.,0.)); +#460461 = ORIENTED_EDGE('',*,*,#460462,.T.); +#460462 = EDGE_CURVE('',#460455,#460463,#460465,.T.); +#460463 = VERTEX_POINT('',#460464); +#460464 = CARTESIAN_POINT('',(136.060681,-143.629678,-7.5E-02)); +#460465 = LINE('',#460466,#460467); +#460466 = CARTESIAN_POINT('',(136.348771,-143.629678,-7.5E-02)); +#460467 = VECTOR('',#460468,1.); +#460468 = DIRECTION('',(-1.,0.,0.)); +#460469 = ORIENTED_EDGE('',*,*,#460470,.T.); +#460470 = EDGE_CURVE('',#460463,#460471,#460473,.T.); +#460471 = VERTEX_POINT('',#460472); +#460472 = CARTESIAN_POINT('',(136.060681,-143.341588,-7.5E-02)); +#460473 = LINE('',#460474,#460475); +#460474 = CARTESIAN_POINT('',(136.060681,-143.629678,-7.5E-02)); +#460475 = VECTOR('',#460476,1.); +#460476 = DIRECTION('',(0.,1.,0.)); +#460477 = ORIENTED_EDGE('',*,*,#460478,.T.); +#460478 = EDGE_CURVE('',#460471,#460479,#460481,.T.); +#460479 = VERTEX_POINT('',#460480); +#460480 = CARTESIAN_POINT('',(135.484499,-143.341588,-7.5E-02)); +#460481 = LINE('',#460482,#460483); +#460482 = CARTESIAN_POINT('',(136.060681,-143.341588,-7.5E-02)); +#460483 = VECTOR('',#460484,1.); +#460484 = DIRECTION('',(-1.,0.,0.)); +#460485 = ORIENTED_EDGE('',*,*,#460486,.T.); +#460486 = EDGE_CURVE('',#460479,#460487,#460489,.T.); +#460487 = VERTEX_POINT('',#460488); +#460488 = CARTESIAN_POINT('',(135.484499,-143.053497,-7.5E-02)); +#460489 = LINE('',#460490,#460491); +#460490 = CARTESIAN_POINT('',(135.484499,-143.341588,-7.5E-02)); +#460491 = VECTOR('',#460492,1.); +#460492 = DIRECTION('',(0.,1.,0.)); +#460493 = ORIENTED_EDGE('',*,*,#460494,.T.); +#460494 = EDGE_CURVE('',#460487,#460495,#460497,.T.); +#460495 = VERTEX_POINT('',#460496); +#460496 = CARTESIAN_POINT('',(135.196408,-143.053497,-7.5E-02)); +#460497 = LINE('',#460498,#460499); +#460498 = CARTESIAN_POINT('',(135.484499,-143.053497,-7.5E-02)); +#460499 = VECTOR('',#460500,1.); +#460500 = DIRECTION('',(-1.,0.,0.)); +#460501 = ORIENTED_EDGE('',*,*,#460502,.T.); +#460502 = EDGE_CURVE('',#460495,#460503,#460505,.T.); +#460503 = VERTEX_POINT('',#460504); +#460504 = CARTESIAN_POINT('',(135.196408,-142.765406,-7.5E-02)); +#460505 = LINE('',#460506,#460507); +#460506 = CARTESIAN_POINT('',(135.196408,-143.053497,-7.5E-02)); +#460507 = VECTOR('',#460508,1.); +#460508 = DIRECTION('',(0.,1.,0.)); +#460509 = ORIENTED_EDGE('',*,*,#460510,.T.); +#460510 = EDGE_CURVE('',#460503,#460511,#460513,.T.); +#460511 = VERTEX_POINT('',#460512); +#460512 = CARTESIAN_POINT('',(134.908318,-142.765406,-7.5E-02)); +#460513 = LINE('',#460514,#460515); +#460514 = CARTESIAN_POINT('',(135.196408,-142.765406,-7.5E-02)); +#460515 = VECTOR('',#460516,1.); +#460516 = DIRECTION('',(-1.,0.,0.)); +#460517 = ORIENTED_EDGE('',*,*,#460518,.T.); +#460518 = EDGE_CURVE('',#460511,#460519,#460521,.T.); +#460519 = VERTEX_POINT('',#460520); +#460520 = CARTESIAN_POINT('',(134.908318,-142.477316,-7.5E-02)); +#460521 = LINE('',#460522,#460523); +#460522 = CARTESIAN_POINT('',(134.908318,-142.765406,-7.5E-02)); +#460523 = VECTOR('',#460524,1.); +#460524 = DIRECTION('',(0.,1.,0.)); +#460525 = ORIENTED_EDGE('',*,*,#460526,.T.); +#460526 = EDGE_CURVE('',#460519,#460527,#460529,.T.); +#460527 = VERTEX_POINT('',#460528); +#460528 = CARTESIAN_POINT('',(134.332136,-142.477316,-7.5E-02)); +#460529 = LINE('',#460530,#460531); +#460530 = CARTESIAN_POINT('',(134.908318,-142.477316,-7.5E-02)); +#460531 = VECTOR('',#460532,1.); +#460532 = DIRECTION('',(-1.,0.,0.)); +#460533 = ORIENTED_EDGE('',*,*,#460534,.T.); +#460534 = EDGE_CURVE('',#460527,#460535,#460537,.T.); +#460535 = VERTEX_POINT('',#460536); +#460536 = CARTESIAN_POINT('',(134.332136,-142.189225,-7.5E-02)); +#460537 = LINE('',#460538,#460539); +#460538 = CARTESIAN_POINT('',(134.332136,-142.477316,-7.5E-02)); +#460539 = VECTOR('',#460540,1.); +#460540 = DIRECTION('',(0.,1.,0.)); +#460541 = ORIENTED_EDGE('',*,*,#460542,.T.); +#460542 = EDGE_CURVE('',#460535,#460543,#460545,.T.); +#460543 = VERTEX_POINT('',#460544); +#460544 = CARTESIAN_POINT('',(134.620227,-142.189225,-7.5E-02)); +#460545 = LINE('',#460546,#460547); +#460546 = CARTESIAN_POINT('',(134.332136,-142.189225,-7.5E-02)); +#460547 = VECTOR('',#460548,1.); +#460548 = DIRECTION('',(1.,0.,0.)); +#460549 = ORIENTED_EDGE('',*,*,#460550,.T.); +#460550 = EDGE_CURVE('',#460543,#460343,#460551,.T.); +#460551 = LINE('',#460552,#460553); +#460552 = CARTESIAN_POINT('',(134.620227,-142.189225,-7.5E-02)); +#460553 = VECTOR('',#460554,1.); +#460554 = DIRECTION('',(0.,1.,0.)); +#460555 = PLANE('',#460556); +#460556 = AXIS2_PLACEMENT_3D('',#460557,#460558,#460559); +#460557 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460558 = DIRECTION('',(-0.,-0.,-1.)); +#460559 = DIRECTION('',(-1.,0.,0.)); +#460560 = SHELL_BASED_SURFACE_MODEL('',(#460561)); +#460561 = OPEN_SHELL('',(#460562)); +#460562 = ADVANCED_FACE('',(#460563),#460605,.T.); +#460563 = FACE_BOUND('',#460564,.T.); +#460564 = EDGE_LOOP('',(#460565,#460575,#460583,#460591,#460599)); +#460565 = ORIENTED_EDGE('',*,*,#460566,.T.); +#460566 = EDGE_CURVE('',#460567,#460569,#460571,.T.); +#460567 = VERTEX_POINT('',#460568); +#460568 = CARTESIAN_POINT('',(136.636862,-143.629678,-7.5E-02)); +#460569 = VERTEX_POINT('',#460570); +#460570 = CARTESIAN_POINT('',(136.636862,-143.341588,-7.5E-02)); +#460571 = LINE('',#460572,#460573); +#460572 = CARTESIAN_POINT('',(136.636862,-143.629678,-7.5E-02)); +#460573 = VECTOR('',#460574,1.); +#460574 = DIRECTION('',(0.,1.,0.)); +#460575 = ORIENTED_EDGE('',*,*,#460576,.T.); +#460576 = EDGE_CURVE('',#460569,#460577,#460579,.T.); +#460577 = VERTEX_POINT('',#460578); +#460578 = CARTESIAN_POINT('',(136.924953,-143.341588,-7.5E-02)); +#460579 = LINE('',#460580,#460581); +#460580 = CARTESIAN_POINT('',(136.636862,-143.341588,-7.5E-02)); +#460581 = VECTOR('',#460582,1.); +#460582 = DIRECTION('',(1.,0.,0.)); +#460583 = ORIENTED_EDGE('',*,*,#460584,.T.); +#460584 = EDGE_CURVE('',#460577,#460585,#460587,.T.); +#460585 = VERTEX_POINT('',#460586); +#460586 = CARTESIAN_POINT('',(136.924953,-143.485633,-7.5E-02)); +#460587 = LINE('',#460588,#460589); +#460588 = CARTESIAN_POINT('',(136.924953,-143.341588,-7.5E-02)); +#460589 = VECTOR('',#460590,1.); +#460590 = DIRECTION('',(0.,-1.,0.)); +#460591 = ORIENTED_EDGE('',*,*,#460592,.T.); +#460592 = EDGE_CURVE('',#460585,#460593,#460595,.T.); +#460593 = VERTEX_POINT('',#460594); +#460594 = CARTESIAN_POINT('',(136.924953,-143.629678,-7.5E-02)); +#460595 = LINE('',#460596,#460597); +#460596 = CARTESIAN_POINT('',(136.924953,-143.485633,-7.5E-02)); +#460597 = VECTOR('',#460598,1.); +#460598 = DIRECTION('',(0.,-1.,0.)); +#460599 = ORIENTED_EDGE('',*,*,#460600,.T.); +#460600 = EDGE_CURVE('',#460593,#460567,#460601,.T.); +#460601 = LINE('',#460602,#460603); +#460602 = CARTESIAN_POINT('',(136.924953,-143.629678,-7.5E-02)); +#460603 = VECTOR('',#460604,1.); +#460604 = DIRECTION('',(-1.,0.,0.)); +#460605 = PLANE('',#460606); +#460606 = AXIS2_PLACEMENT_3D('',#460607,#460608,#460609); +#460607 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460608 = DIRECTION('',(-0.,-0.,-1.)); +#460609 = DIRECTION('',(-1.,0.,0.)); +#460610 = SHELL_BASED_SURFACE_MODEL('',(#460611)); +#460611 = OPEN_SHELL('',(#460612)); +#460612 = ADVANCED_FACE('',(#460613),#460655,.T.); +#460613 = FACE_BOUND('',#460614,.T.); +#460614 = EDGE_LOOP('',(#460615,#460625,#460633,#460641,#460649)); +#460615 = ORIENTED_EDGE('',*,*,#460616,.T.); +#460616 = EDGE_CURVE('',#460617,#460619,#460621,.T.); +#460617 = VERTEX_POINT('',#460618); +#460618 = CARTESIAN_POINT('',(137.789225,-143.053497,-7.5E-02)); +#460619 = VERTEX_POINT('',#460620); +#460620 = CARTESIAN_POINT('',(137.789225,-142.189225,-7.5E-02)); +#460621 = LINE('',#460622,#460623); +#460622 = CARTESIAN_POINT('',(137.789225,-143.053497,-7.5E-02)); +#460623 = VECTOR('',#460624,1.); +#460624 = DIRECTION('',(0.,1.,0.)); +#460625 = ORIENTED_EDGE('',*,*,#460626,.T.); +#460626 = EDGE_CURVE('',#460619,#460627,#460629,.T.); +#460627 = VERTEX_POINT('',#460628); +#460628 = CARTESIAN_POINT('',(138.653497,-142.189225,-7.5E-02)); +#460629 = LINE('',#460630,#460631); +#460630 = CARTESIAN_POINT('',(137.789225,-142.189225,-7.5E-02)); +#460631 = VECTOR('',#460632,1.); +#460632 = DIRECTION('',(1.,0.,0.)); +#460633 = ORIENTED_EDGE('',*,*,#460634,.T.); +#460634 = EDGE_CURVE('',#460627,#460635,#460637,.T.); +#460635 = VERTEX_POINT('',#460636); +#460636 = CARTESIAN_POINT('',(138.653497,-142.621361,-7.5E-02)); +#460637 = LINE('',#460638,#460639); +#460638 = CARTESIAN_POINT('',(138.653497,-142.189225,-7.5E-02)); +#460639 = VECTOR('',#460640,1.); +#460640 = DIRECTION('',(0.,-1.,0.)); +#460641 = ORIENTED_EDGE('',*,*,#460642,.T.); +#460642 = EDGE_CURVE('',#460635,#460643,#460645,.T.); +#460643 = VERTEX_POINT('',#460644); +#460644 = CARTESIAN_POINT('',(138.653497,-143.053497,-7.5E-02)); +#460645 = LINE('',#460646,#460647); +#460646 = CARTESIAN_POINT('',(138.653497,-142.621361,-7.5E-02)); +#460647 = VECTOR('',#460648,1.); +#460648 = DIRECTION('',(0.,-1.,0.)); +#460649 = ORIENTED_EDGE('',*,*,#460650,.T.); +#460650 = EDGE_CURVE('',#460643,#460617,#460651,.T.); +#460651 = LINE('',#460652,#460653); +#460652 = CARTESIAN_POINT('',(138.653497,-143.053497,-7.5E-02)); +#460653 = VECTOR('',#460654,1.); +#460654 = DIRECTION('',(-1.,0.,0.)); +#460655 = PLANE('',#460656); +#460656 = AXIS2_PLACEMENT_3D('',#460657,#460658,#460659); +#460657 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460658 = DIRECTION('',(-0.,-0.,-1.)); +#460659 = DIRECTION('',(-1.,0.,0.)); +#460660 = SHELL_BASED_SURFACE_MODEL('',(#460661)); +#460661 = OPEN_SHELL('',(#460662)); +#460662 = ADVANCED_FACE('',(#460663,#460697),#460731,.T.); +#460663 = FACE_BOUND('',#460664,.T.); +#460664 = EDGE_LOOP('',(#460665,#460675,#460683,#460691)); +#460665 = ORIENTED_EDGE('',*,*,#460666,.T.); +#460666 = EDGE_CURVE('',#460667,#460669,#460671,.T.); +#460667 = VERTEX_POINT('',#460668); +#460668 = CARTESIAN_POINT('',(137.213044,-143.629678,-7.5E-02)); +#460669 = VERTEX_POINT('',#460670); +#460670 = CARTESIAN_POINT('',(137.213044,-141.613043,-7.5E-02)); +#460671 = LINE('',#460672,#460673); +#460672 = CARTESIAN_POINT('',(137.213044,-143.629678,-7.5E-02)); +#460673 = VECTOR('',#460674,1.); +#460674 = DIRECTION('',(0.,1.,0.)); +#460675 = ORIENTED_EDGE('',*,*,#460676,.T.); +#460676 = EDGE_CURVE('',#460669,#460677,#460679,.T.); +#460677 = VERTEX_POINT('',#460678); +#460678 = CARTESIAN_POINT('',(139.229679,-141.613043,-7.5E-02)); +#460679 = LINE('',#460680,#460681); +#460680 = CARTESIAN_POINT('',(137.213044,-141.613043,-7.5E-02)); +#460681 = VECTOR('',#460682,1.); +#460682 = DIRECTION('',(1.,0.,0.)); +#460683 = ORIENTED_EDGE('',*,*,#460684,.T.); +#460684 = EDGE_CURVE('',#460677,#460685,#460687,.T.); +#460685 = VERTEX_POINT('',#460686); +#460686 = CARTESIAN_POINT('',(139.229679,-143.629678,-7.5E-02)); +#460687 = LINE('',#460688,#460689); +#460688 = CARTESIAN_POINT('',(139.229679,-141.613043,-7.5E-02)); +#460689 = VECTOR('',#460690,1.); +#460690 = DIRECTION('',(0.,-1.,0.)); +#460691 = ORIENTED_EDGE('',*,*,#460692,.T.); +#460692 = EDGE_CURVE('',#460685,#460667,#460693,.T.); +#460693 = LINE('',#460694,#460695); +#460694 = CARTESIAN_POINT('',(139.229679,-143.629678,-7.5E-02)); +#460695 = VECTOR('',#460696,1.); +#460696 = DIRECTION('',(-1.,0.,0.)); +#460697 = FACE_BOUND('',#460698,.T.); +#460698 = EDGE_LOOP('',(#460699,#460709,#460717,#460725)); +#460699 = ORIENTED_EDGE('',*,*,#460700,.T.); +#460700 = EDGE_CURVE('',#460701,#460703,#460705,.T.); +#460701 = VERTEX_POINT('',#460702); +#460702 = CARTESIAN_POINT('',(138.941588,-143.341588,-7.5E-02)); +#460703 = VERTEX_POINT('',#460704); +#460704 = CARTESIAN_POINT('',(138.941588,-141.901134,-7.5E-02)); +#460705 = LINE('',#460706,#460707); +#460706 = CARTESIAN_POINT('',(138.941588,-143.341588,-7.5E-02)); +#460707 = VECTOR('',#460708,1.); +#460708 = DIRECTION('',(0.,1.,0.)); +#460709 = ORIENTED_EDGE('',*,*,#460710,.T.); +#460710 = EDGE_CURVE('',#460703,#460711,#460713,.T.); +#460711 = VERTEX_POINT('',#460712); +#460712 = CARTESIAN_POINT('',(137.501134,-141.901134,-7.5E-02)); +#460713 = LINE('',#460714,#460715); +#460714 = CARTESIAN_POINT('',(138.941588,-141.901134,-7.5E-02)); +#460715 = VECTOR('',#460716,1.); +#460716 = DIRECTION('',(-1.,0.,0.)); +#460717 = ORIENTED_EDGE('',*,*,#460718,.T.); +#460718 = EDGE_CURVE('',#460711,#460719,#460721,.T.); +#460719 = VERTEX_POINT('',#460720); +#460720 = CARTESIAN_POINT('',(137.501134,-143.341588,-7.5E-02)); +#460721 = LINE('',#460722,#460723); +#460722 = CARTESIAN_POINT('',(137.501134,-141.901134,-7.5E-02)); +#460723 = VECTOR('',#460724,1.); +#460724 = DIRECTION('',(0.,-1.,0.)); +#460725 = ORIENTED_EDGE('',*,*,#460726,.T.); +#460726 = EDGE_CURVE('',#460719,#460701,#460727,.T.); +#460727 = LINE('',#460728,#460729); +#460728 = CARTESIAN_POINT('',(137.501134,-143.341588,-7.5E-02)); +#460729 = VECTOR('',#460730,1.); +#460730 = DIRECTION('',(1.,0.,0.)); +#460731 = PLANE('',#460732); +#460732 = AXIS2_PLACEMENT_3D('',#460733,#460734,#460735); +#460733 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460734 = DIRECTION('',(-0.,-0.,-1.)); +#460735 = DIRECTION('',(-1.,0.,0.)); +#460736 = SHELL_BASED_SURFACE_MODEL('',(#460737)); +#460737 = OPEN_SHELL('',(#460738)); +#460738 = ADVANCED_FACE('',(#460739),#460962,.T.); +#460739 = FACE_BOUND('',#460740,.T.); +#460740 = EDGE_LOOP('',(#460741,#460751,#460759,#460767,#460775,#460783, + #460791,#460799,#460807,#460815,#460823,#460832,#460840,#460849, + #460857,#460866,#460874,#460882,#460890,#460899,#460907,#460916, + #460924,#460932,#460940,#460948,#460956)); +#460741 = ORIENTED_EDGE('',*,*,#460742,.T.); +#460742 = EDGE_CURVE('',#460743,#460745,#460747,.T.); +#460743 = VERTEX_POINT('',#460744); +#460744 = CARTESIAN_POINT('',(153.192915,-143.002021,-7.5E-02)); +#460745 = VERTEX_POINT('',#460746); +#460746 = CARTESIAN_POINT('',(153.298387,-142.950616,-7.5E-02)); +#460747 = LINE('',#460748,#460749); +#460748 = CARTESIAN_POINT('',(153.192915,-143.002021,-7.5E-02)); +#460749 = VECTOR('',#460750,1.); +#460750 = DIRECTION('',(0.898918699137,0.438115478318,0.)); +#460751 = ORIENTED_EDGE('',*,*,#460752,.T.); +#460752 = EDGE_CURVE('',#460745,#460753,#460755,.T.); +#460753 = VERTEX_POINT('',#460754); +#460754 = CARTESIAN_POINT('',(153.50099,-142.901504,-7.5E-02)); +#460755 = LINE('',#460756,#460757); +#460756 = CARTESIAN_POINT('',(153.298387,-142.950616,-7.5E-02)); +#460757 = VECTOR('',#460758,1.); +#460758 = DIRECTION('',(0.97185436569,0.235582452421,0.)); +#460759 = ORIENTED_EDGE('',*,*,#460760,.T.); +#460760 = EDGE_CURVE('',#460753,#460761,#460763,.T.); +#460761 = VERTEX_POINT('',#460762); +#460762 = CARTESIAN_POINT('',(153.649856,-142.902699,-7.5E-02)); +#460763 = LINE('',#460764,#460765); +#460764 = CARTESIAN_POINT('',(153.50099,-142.901504,-7.5E-02)); +#460765 = VECTOR('',#460766,1.); +#460766 = DIRECTION('',(0.999967782355,-8.027094836555E-03,0.)); +#460767 = ORIENTED_EDGE('',*,*,#460768,.T.); +#460768 = EDGE_CURVE('',#460761,#460769,#460771,.T.); +#460769 = VERTEX_POINT('',#460770); +#460770 = CARTESIAN_POINT('',(153.856684,-142.954402,-7.5E-02)); +#460771 = LINE('',#460772,#460773); +#460772 = CARTESIAN_POINT('',(153.649856,-142.902699,-7.5E-02)); +#460773 = VECTOR('',#460774,1.); +#460774 = DIRECTION('',(0.970146914665,-0.242517966276,0.)); +#460775 = ORIENTED_EDGE('',*,*,#460776,.T.); +#460776 = EDGE_CURVE('',#460769,#460777,#460779,.T.); +#460777 = VERTEX_POINT('',#460778); +#460778 = CARTESIAN_POINT('',(153.964916,-143.011386,-7.5E-02)); +#460779 = LINE('',#460780,#460781); +#460780 = CARTESIAN_POINT('',(153.856684,-142.954402,-7.5E-02)); +#460781 = VECTOR('',#460782,1.); +#460782 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#460783 = ORIENTED_EDGE('',*,*,#460784,.T.); +#460784 = EDGE_CURVE('',#460777,#460785,#460787,.T.); +#460785 = VERTEX_POINT('',#460786); +#460786 = CARTESIAN_POINT('',(154.066543,-143.116185,-7.5E-02)); +#460787 = LINE('',#460788,#460789); +#460788 = CARTESIAN_POINT('',(153.964916,-143.011386,-7.5E-02)); +#460789 = VECTOR('',#460790,1.); +#460790 = DIRECTION('',(0.696158994836,-0.717887633206,0.)); +#460791 = ORIENTED_EDGE('',*,*,#460792,.T.); +#460792 = EDGE_CURVE('',#460785,#460793,#460795,.T.); +#460793 = VERTEX_POINT('',#460794); +#460794 = CARTESIAN_POINT('',(154.122419,-143.284837,-7.5E-02)); +#460795 = LINE('',#460796,#460797); +#460796 = CARTESIAN_POINT('',(154.066543,-143.116185,-7.5E-02)); +#460797 = VECTOR('',#460798,1.); +#460798 = DIRECTION('',(0.314498165035,-0.949258080919,0.)); +#460799 = ORIENTED_EDGE('',*,*,#460800,.T.); +#460800 = EDGE_CURVE('',#460793,#460801,#460803,.T.); +#460801 = VERTEX_POINT('',#460802); +#460802 = CARTESIAN_POINT('',(154.119853,-143.395887,-7.5E-02)); +#460803 = LINE('',#460804,#460805); +#460804 = CARTESIAN_POINT('',(154.122419,-143.284837,-7.5E-02)); +#460805 = VECTOR('',#460806,1.); +#460806 = DIRECTION('',(-2.310054259205E-02,-0.999733146861,0.)); +#460807 = ORIENTED_EDGE('',*,*,#460808,.T.); +#460808 = EDGE_CURVE('',#460801,#460809,#460811,.T.); +#460809 = VERTEX_POINT('',#460810); +#460810 = CARTESIAN_POINT('',(154.066539,-143.548733,-7.5E-02)); +#460811 = LINE('',#460812,#460813); +#460812 = CARTESIAN_POINT('',(154.119853,-143.395887,-7.5E-02)); +#460813 = VECTOR('',#460814,1.); +#460814 = DIRECTION('',(-0.329348077601,-0.944208580654,0.)); +#460815 = ORIENTED_EDGE('',*,*,#460816,.T.); +#460816 = EDGE_CURVE('',#460809,#460817,#460819,.T.); +#460817 = VERTEX_POINT('',#460818); +#460818 = CARTESIAN_POINT('',(154.012535,-143.605907,-7.5E-02)); +#460819 = LINE('',#460820,#460821); +#460820 = CARTESIAN_POINT('',(154.066539,-143.548733,-7.5E-02)); +#460821 = VECTOR('',#460822,1.); +#460822 = DIRECTION('',(-0.686666095211,-0.726972952515,0.)); +#460823 = ORIENTED_EDGE('',*,*,#460824,.T.); +#460824 = EDGE_CURVE('',#460817,#460825,#460827,.T.); +#460825 = VERTEX_POINT('',#460826); +#460826 = CARTESIAN_POINT('',(153.930986,-143.551416,-7.5E-02)); +#460827 = CIRCLE('',#460828,5.000026658744E-02); +#460828 = AXIS2_PLACEMENT_3D('',#460829,#460830,#460831); +#460829 = CARTESIAN_POINT('',(153.97717990589,-143.5705510389,-7.5E-02) + ); +#460830 = DIRECTION('',(-0.,0.,-1.)); +#460831 = DIRECTION('',(0.707098111955,-0.707115450312,-0.)); +#460832 = ORIENTED_EDGE('',*,*,#460833,.T.); +#460833 = EDGE_CURVE('',#460825,#460834,#460836,.T.); +#460834 = VERTEX_POINT('',#460835); +#460835 = CARTESIAN_POINT('',(153.981099,-143.495921,-7.5E-02)); +#460836 = LINE('',#460837,#460838); +#460837 = CARTESIAN_POINT('',(153.930986,-143.551416,-7.5E-02)); +#460838 = VECTOR('',#460839,1.); +#460839 = DIRECTION('',(0.670201435317,0.742179247958,0.)); +#460840 = ORIENTED_EDGE('',*,*,#460841,.T.); +#460841 = EDGE_CURVE('',#460834,#460842,#460844,.T.); +#460842 = VERTEX_POINT('',#460843); +#460843 = CARTESIAN_POINT('',(153.981099,-143.16899,-7.5E-02)); +#460844 = CIRCLE('',#460845,0.32750706928); +#460845 = AXIS2_PLACEMENT_3D('',#460846,#460847,#460848); +#460846 = CARTESIAN_POINT('',(153.69730345609,-143.3324555,-7.5E-02)); +#460847 = DIRECTION('',(0.,-0.,1.)); +#460848 = DIRECTION('',(0.866532574472,-0.4991205239,-0.)); +#460849 = ORIENTED_EDGE('',*,*,#460850,.T.); +#460850 = EDGE_CURVE('',#460842,#460851,#460853,.T.); +#460851 = VERTEX_POINT('',#460852); +#460852 = CARTESIAN_POINT('',(153.899942,-143.087834,-7.5E-02)); +#460853 = LINE('',#460854,#460855); +#460854 = CARTESIAN_POINT('',(153.981099,-143.16899,-7.5E-02)); +#460855 = VECTOR('',#460856,1.); +#460856 = DIRECTION('',(-0.707111137613,0.707102424734,0.)); +#460857 = ORIENTED_EDGE('',*,*,#460858,.T.); +#460858 = EDGE_CURVE('',#460851,#460859,#460861,.T.); +#460859 = VERTEX_POINT('',#460860); +#460860 = CARTESIAN_POINT('',(153.507145,-143.001504,-7.5E-02)); +#460861 = CIRCLE('',#460862,0.639216739852); +#460862 = AXIS2_PLACEMENT_3D('',#460863,#460864,#460865); +#460863 = CARTESIAN_POINT('',(153.57329593559,-143.6372886288,-7.5E-02) + ); +#460864 = DIRECTION('',(0.,0.,1.)); +#460865 = DIRECTION('',(0.511009871986,0.859574843008,-0.)); +#460866 = ORIENTED_EDGE('',*,*,#460867,.T.); +#460867 = EDGE_CURVE('',#460859,#460868,#460870,.T.); +#460868 = VERTEX_POINT('',#460869); +#460869 = CARTESIAN_POINT('',(153.327966,-143.046298,-7.5E-02)); +#460870 = LINE('',#460871,#460872); +#460871 = CARTESIAN_POINT('',(153.507145,-143.001504,-7.5E-02)); +#460872 = VECTOR('',#460873,1.); +#460873 = DIRECTION('',(-0.970143455617,-0.242531803118,0.)); +#460874 = ORIENTED_EDGE('',*,*,#460875,.T.); +#460875 = EDGE_CURVE('',#460868,#460876,#460878,.T.); +#460876 = VERTEX_POINT('',#460877); +#460877 = CARTESIAN_POINT('',(153.244892,-143.087835,-7.5E-02)); +#460878 = LINE('',#460879,#460880); +#460879 = CARTESIAN_POINT('',(153.327966,-143.046298,-7.5E-02)); +#460880 = VECTOR('',#460881,1.); +#460881 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#460882 = ORIENTED_EDGE('',*,*,#460883,.T.); +#460883 = EDGE_CURVE('',#460876,#460884,#460886,.T.); +#460884 = VERTEX_POINT('',#460885); +#460885 = CARTESIAN_POINT('',(153.163739,-143.168988,-7.5E-02)); +#460886 = LINE('',#460887,#460888); +#460887 = CARTESIAN_POINT('',(153.244892,-143.087835,-7.5E-02)); +#460888 = VECTOR('',#460889,1.); +#460889 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#460890 = ORIENTED_EDGE('',*,*,#460891,.T.); +#460891 = EDGE_CURVE('',#460884,#460892,#460894,.T.); +#460892 = VERTEX_POINT('',#460893); +#460893 = CARTESIAN_POINT('',(153.163739,-143.495923,-7.5E-02)); +#460894 = CIRCLE('',#460895,0.327515752221); +#460895 = AXIS2_PLACEMENT_3D('',#460896,#460897,#460898); +#460896 = CARTESIAN_POINT('',(153.44754341222,-143.3324555,-7.5E-02)); +#460897 = DIRECTION('',(0.,0.,1.)); +#460898 = DIRECTION('',(-0.866536678915,0.499113398032,0.)); +#460899 = ORIENTED_EDGE('',*,*,#460900,.T.); +#460900 = EDGE_CURVE('',#460892,#460901,#460903,.T.); +#460901 = VERTEX_POINT('',#460902); +#460902 = CARTESIAN_POINT('',(153.213851,-143.551416,-7.5E-02)); +#460903 = LINE('',#460904,#460905); +#460904 = CARTESIAN_POINT('',(153.163739,-143.495923,-7.5E-02)); +#460905 = VECTOR('',#460906,1.); +#460906 = DIRECTION('',(0.670207373291,-0.742173885816,0.)); +#460907 = ORIENTED_EDGE('',*,*,#460908,.T.); +#460908 = EDGE_CURVE('',#460901,#460909,#460911,.T.); +#460909 = VERTEX_POINT('',#460910); +#460910 = CARTESIAN_POINT('',(153.148522,-143.616745,-7.5E-02)); +#460911 = CIRCLE('',#460912,5.000060920129E-02); +#460912 = AXIS2_PLACEMENT_3D('',#460913,#460914,#460915); +#460913 = CARTESIAN_POINT('',(153.1676565,-143.5705505,-7.5E-02)); +#460914 = DIRECTION('',(0.,0.,-1.)); +#460915 = DIRECTION('',(0.923878743437,0.382685337352,0.)); +#460916 = ORIENTED_EDGE('',*,*,#460917,.T.); +#460917 = EDGE_CURVE('',#460909,#460918,#460920,.T.); +#460918 = VERTEX_POINT('',#460919); +#460919 = CARTESIAN_POINT('',(153.084683,-143.558287,-7.5E-02)); +#460920 = LINE('',#460921,#460922); +#460921 = CARTESIAN_POINT('',(153.148522,-143.616745,-7.5E-02)); +#460922 = VECTOR('',#460923,1.); +#460923 = DIRECTION('',(-0.737505544246,0.675341078424,0.)); +#460924 = ORIENTED_EDGE('',*,*,#460925,.T.); +#460925 = EDGE_CURVE('',#460918,#460926,#460928,.T.); +#460926 = VERTEX_POINT('',#460927); +#460927 = CARTESIAN_POINT('',(153.072604,-143.538743,-7.5E-02)); +#460928 = LINE('',#460929,#460930); +#460929 = CARTESIAN_POINT('',(153.084683,-143.558287,-7.5E-02)); +#460930 = VECTOR('',#460931,1.); +#460931 = DIRECTION('',(-0.525735638669,0.850648010774,0.)); +#460932 = ORIENTED_EDGE('',*,*,#460933,.T.); +#460933 = EDGE_CURVE('',#460926,#460934,#460936,.T.); +#460934 = VERTEX_POINT('',#460935); +#460935 = CARTESIAN_POINT('',(153.022419,-143.380075,-7.5E-02)); +#460936 = LINE('',#460937,#460938); +#460937 = CARTESIAN_POINT('',(153.072604,-143.538743,-7.5E-02)); +#460938 = VECTOR('',#460939,1.); +#460939 = DIRECTION('',(-0.301564730907,0.953445705362,0.)); +#460940 = ORIENTED_EDGE('',*,*,#460941,.T.); +#460941 = EDGE_CURVE('',#460934,#460942,#460944,.T.); +#460942 = VERTEX_POINT('',#460943); +#460943 = CARTESIAN_POINT('',(153.024985,-143.269026,-7.5E-02)); +#460944 = LINE('',#460945,#460946); +#460945 = CARTESIAN_POINT('',(153.022419,-143.380075,-7.5E-02)); +#460946 = VECTOR('',#460947,1.); +#460947 = DIRECTION('',(2.310075050194E-02,0.999733142057,0.)); +#460948 = ORIENTED_EDGE('',*,*,#460949,.T.); +#460949 = EDGE_CURVE('',#460942,#460950,#460952,.T.); +#460950 = VERTEX_POINT('',#460951); +#460951 = CARTESIAN_POINT('',(153.078297,-143.116181,-7.5E-02)); +#460952 = LINE('',#460953,#460954); +#460953 = CARTESIAN_POINT('',(153.024985,-143.269026,-7.5E-02)); +#460954 = VECTOR('',#460955,1.); +#460955 = DIRECTION('',(0.329338983659,0.94421175265,0.)); +#460956 = ORIENTED_EDGE('',*,*,#460957,.T.); +#460957 = EDGE_CURVE('',#460950,#460743,#460958,.T.); +#460958 = LINE('',#460959,#460960); +#460959 = CARTESIAN_POINT('',(153.078297,-143.116181,-7.5E-02)); +#460960 = VECTOR('',#460961,1.); +#460961 = DIRECTION('',(0.708520947272,0.705689781191,0.)); +#460962 = PLANE('',#460963); +#460963 = AXIS2_PLACEMENT_3D('',#460964,#460965,#460966); +#460964 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#460965 = DIRECTION('',(-0.,-0.,-1.)); +#460966 = DIRECTION('',(-1.,0.,0.)); +#460967 = SHELL_BASED_SURFACE_MODEL('',(#460968)); +#460968 = OPEN_SHELL('',(#460969)); +#460969 = ADVANCED_FACE('',(#460970),#461012,.T.); +#460970 = FACE_BOUND('',#460971,.T.); +#460971 = EDGE_LOOP('',(#460972,#460982,#460990,#460998,#461006)); +#460972 = ORIENTED_EDGE('',*,*,#460973,.T.); +#460973 = EDGE_CURVE('',#460974,#460976,#460978,.T.); +#460974 = VERTEX_POINT('',#460975); +#460975 = CARTESIAN_POINT('',(134.332136,-142.765406,-7.5E-02)); +#460976 = VERTEX_POINT('',#460977); +#460977 = CARTESIAN_POINT('',(134.476182,-142.765406,-7.5E-02)); +#460978 = LINE('',#460979,#460980); +#460979 = CARTESIAN_POINT('',(134.332136,-142.765406,-7.5E-02)); +#460980 = VECTOR('',#460981,1.); +#460981 = DIRECTION('',(1.,0.,0.)); +#460982 = ORIENTED_EDGE('',*,*,#460983,.T.); +#460983 = EDGE_CURVE('',#460976,#460984,#460986,.T.); +#460984 = VERTEX_POINT('',#460985); +#460985 = CARTESIAN_POINT('',(134.620227,-142.765406,-7.5E-02)); +#460986 = LINE('',#460987,#460988); +#460987 = CARTESIAN_POINT('',(134.476182,-142.765406,-7.5E-02)); +#460988 = VECTOR('',#460989,1.); +#460989 = DIRECTION('',(1.,0.,0.)); +#460990 = ORIENTED_EDGE('',*,*,#460991,.T.); +#460991 = EDGE_CURVE('',#460984,#460992,#460994,.T.); +#460992 = VERTEX_POINT('',#460993); +#460993 = CARTESIAN_POINT('',(134.620227,-143.341588,-7.5E-02)); +#460994 = LINE('',#460995,#460996); +#460995 = CARTESIAN_POINT('',(134.620227,-142.765406,-7.5E-02)); +#460996 = VECTOR('',#460997,1.); +#460997 = DIRECTION('',(0.,-1.,0.)); +#460998 = ORIENTED_EDGE('',*,*,#460999,.T.); +#460999 = EDGE_CURVE('',#460992,#461000,#461002,.T.); +#461000 = VERTEX_POINT('',#461001); +#461001 = CARTESIAN_POINT('',(134.332136,-143.341588,-7.5E-02)); +#461002 = LINE('',#461003,#461004); +#461003 = CARTESIAN_POINT('',(134.620227,-143.341588,-7.5E-02)); +#461004 = VECTOR('',#461005,1.); +#461005 = DIRECTION('',(-1.,0.,0.)); +#461006 = ORIENTED_EDGE('',*,*,#461007,.T.); +#461007 = EDGE_CURVE('',#461000,#460974,#461008,.T.); +#461008 = LINE('',#461009,#461010); +#461009 = CARTESIAN_POINT('',(134.332136,-143.341588,-7.5E-02)); +#461010 = VECTOR('',#461011,1.); +#461011 = DIRECTION('',(0.,1.,0.)); +#461012 = PLANE('',#461013); +#461013 = AXIS2_PLACEMENT_3D('',#461014,#461015,#461016); +#461014 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461015 = DIRECTION('',(-0.,-0.,-1.)); +#461016 = DIRECTION('',(-1.,0.,0.)); +#461017 = SHELL_BASED_SURFACE_MODEL('',(#461018)); +#461018 = OPEN_SHELL('',(#461019)); +#461019 = ADVANCED_FACE('',(#461020,#461160),#461243,.T.); +#461020 = FACE_BOUND('',#461021,.T.); +#461021 = EDGE_LOOP('',(#461022,#461032,#461040,#461048,#461056,#461064, + #461072,#461080,#461088,#461096,#461105,#461113,#461122,#461130, + #461138,#461146,#461154)); +#461022 = ORIENTED_EDGE('',*,*,#461023,.T.); +#461023 = EDGE_CURVE('',#461024,#461026,#461028,.T.); +#461024 = VERTEX_POINT('',#461025); +#461025 = CARTESIAN_POINT('',(151.868685,-142.525834,-7.5E-02)); +#461026 = VERTEX_POINT('',#461027); +#461027 = CARTESIAN_POINT('',(151.975011,-142.475178,-7.5E-02)); +#461028 = LINE('',#461029,#461030); +#461029 = CARTESIAN_POINT('',(151.868685,-142.525834,-7.5E-02)); +#461030 = VECTOR('',#461031,1.); +#461031 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#461032 = ORIENTED_EDGE('',*,*,#461033,.T.); +#461033 = EDGE_CURVE('',#461026,#461034,#461036,.T.); +#461034 = VERTEX_POINT('',#461035); +#461035 = CARTESIAN_POINT('',(152.274454,-142.473424,-7.5E-02)); +#461036 = LINE('',#461037,#461038); +#461037 = CARTESIAN_POINT('',(151.975011,-142.475178,-7.5E-02)); +#461038 = VECTOR('',#461039,1.); +#461039 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#461040 = ORIENTED_EDGE('',*,*,#461041,.T.); +#461041 = EDGE_CURVE('',#461034,#461042,#461044,.T.); +#461042 = VERTEX_POINT('',#461043); +#461043 = CARTESIAN_POINT('',(152.294359,-142.478215,-7.5E-02)); +#461044 = LINE('',#461045,#461046); +#461045 = CARTESIAN_POINT('',(152.274454,-142.473424,-7.5E-02)); +#461046 = VECTOR('',#461047,1.); +#461047 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#461048 = ORIENTED_EDGE('',*,*,#461049,.T.); +#461049 = EDGE_CURVE('',#461042,#461050,#461052,.T.); +#461050 = VERTEX_POINT('',#461051); +#461051 = CARTESIAN_POINT('',(152.402591,-142.535199,-7.5E-02)); +#461052 = LINE('',#461053,#461054); +#461053 = CARTESIAN_POINT('',(152.294359,-142.478215,-7.5E-02)); +#461054 = VECTOR('',#461055,1.); +#461055 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#461056 = ORIENTED_EDGE('',*,*,#461057,.T.); +#461057 = EDGE_CURVE('',#461050,#461058,#461060,.T.); +#461058 = VERTEX_POINT('',#461059); +#461059 = CARTESIAN_POINT('',(152.459577,-142.595813,-7.5E-02)); +#461060 = LINE('',#461061,#461062); +#461061 = CARTESIAN_POINT('',(152.402591,-142.535199,-7.5E-02)); +#461062 = VECTOR('',#461063,1.); +#461063 = DIRECTION('',(0.684966417831,-0.72857464027,0.)); +#461064 = ORIENTED_EDGE('',*,*,#461065,.T.); +#461065 = EDGE_CURVE('',#461058,#461066,#461068,.T.); +#461066 = VERTEX_POINT('',#461067); +#461067 = CARTESIAN_POINT('',(152.510232,-142.702139,-7.5E-02)); +#461068 = LINE('',#461069,#461070); +#461069 = CARTESIAN_POINT('',(152.459577,-142.595813,-7.5E-02)); +#461070 = VECTOR('',#461071,1.); +#461071 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#461072 = ORIENTED_EDGE('',*,*,#461073,.T.); +#461073 = EDGE_CURVE('',#461066,#461074,#461076,.T.); +#461074 = VERTEX_POINT('',#461075); +#461075 = CARTESIAN_POINT('',(152.510232,-142.91516,-7.5E-02)); +#461076 = LINE('',#461077,#461078); +#461077 = CARTESIAN_POINT('',(152.510232,-142.702139,-7.5E-02)); +#461078 = VECTOR('',#461079,1.); +#461079 = DIRECTION('',(0.,-1.,0.)); +#461080 = ORIENTED_EDGE('',*,*,#461081,.T.); +#461081 = EDGE_CURVE('',#461074,#461082,#461084,.T.); +#461082 = VERTEX_POINT('',#461083); +#461083 = CARTESIAN_POINT('',(152.489772,-142.961095,-7.5E-02)); +#461084 = LINE('',#461085,#461086); +#461085 = CARTESIAN_POINT('',(152.510232,-142.91516,-7.5E-02)); +#461086 = VECTOR('',#461087,1.); +#461087 = DIRECTION('',(-0.406876386712,-0.91348322696,0.)); +#461088 = ORIENTED_EDGE('',*,*,#461089,.T.); +#461089 = EDGE_CURVE('',#461082,#461090,#461092,.T.); +#461090 = VERTEX_POINT('',#461091); +#461091 = CARTESIAN_POINT('',(152.508669,-142.979992,-7.5E-02)); +#461092 = LINE('',#461093,#461094); +#461093 = CARTESIAN_POINT('',(152.489772,-142.961095,-7.5E-02)); +#461094 = VECTOR('',#461095,1.); +#461095 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#461096 = ORIENTED_EDGE('',*,*,#461097,.T.); +#461097 = EDGE_CURVE('',#461090,#461098,#461100,.T.); +#461098 = VERTEX_POINT('',#461099); +#461099 = CARTESIAN_POINT('',(152.462475,-143.049126,-7.5E-02)); +#461100 = CIRCLE('',#461101,5.000000000004E-02); +#461101 = AXIS2_PLACEMENT_3D('',#461102,#461103,#461104); +#461102 = CARTESIAN_POINT('',(152.46247495228,-142.999126,-7.5E-02)); +#461103 = DIRECTION('',(0.,0.,-1.)); +#461104 = DIRECTION('',(0.923880954236,0.382679999999,0.)); +#461105 = ORIENTED_EDGE('',*,*,#461106,.T.); +#461106 = EDGE_CURVE('',#461098,#461107,#461109,.T.); +#461107 = VERTEX_POINT('',#461108); +#461108 = CARTESIAN_POINT('',(151.462475,-143.049126,-7.5E-02)); +#461109 = LINE('',#461110,#461111); +#461110 = CARTESIAN_POINT('',(152.462475,-143.049126,-7.5E-02)); +#461111 = VECTOR('',#461112,1.); +#461112 = DIRECTION('',(-1.,0.,0.)); +#461113 = ORIENTED_EDGE('',*,*,#461114,.T.); +#461114 = EDGE_CURVE('',#461107,#461115,#461117,.T.); +#461115 = VERTEX_POINT('',#461116); +#461116 = CARTESIAN_POINT('',(151.462475,-142.949126,-7.5E-02)); +#461117 = CIRCLE('',#461118,5.000000000002E-02); +#461118 = AXIS2_PLACEMENT_3D('',#461119,#461120,#461121); +#461119 = CARTESIAN_POINT('',(151.46247504771,-142.999126,-7.5E-02)); +#461120 = DIRECTION('',(0.,0.,-1.)); +#461121 = DIRECTION('',(-9.542361567582E-07,-1.,-0.)); +#461122 = ORIENTED_EDGE('',*,*,#461123,.T.); +#461123 = EDGE_CURVE('',#461115,#461124,#461126,.T.); +#461124 = VERTEX_POINT('',#461125); +#461125 = CARTESIAN_POINT('',(151.762525,-142.949126,-7.5E-02)); +#461126 = LINE('',#461127,#461128); +#461127 = CARTESIAN_POINT('',(151.462475,-142.949126,-7.5E-02)); +#461128 = VECTOR('',#461129,1.); +#461129 = DIRECTION('',(1.,0.,0.)); +#461130 = ORIENTED_EDGE('',*,*,#461131,.T.); +#461131 = EDGE_CURVE('',#461124,#461132,#461134,.T.); +#461132 = VERTEX_POINT('',#461133); +#461133 = CARTESIAN_POINT('',(151.746296,-142.906344,-7.5E-02)); +#461134 = LINE('',#461135,#461136); +#461135 = CARTESIAN_POINT('',(151.762525,-142.949126,-7.5E-02)); +#461136 = VECTOR('',#461137,1.); +#461137 = DIRECTION('',(-0.354679928026,0.93498777995,0.)); +#461138 = ORIENTED_EDGE('',*,*,#461139,.T.); +#461139 = EDGE_CURVE('',#461132,#461140,#461142,.T.); +#461140 = VERTEX_POINT('',#461141); +#461141 = CARTESIAN_POINT('',(151.74805,-142.702139,-7.5E-02)); +#461142 = LINE('',#461143,#461144); +#461143 = CARTESIAN_POINT('',(151.746296,-142.906344,-7.5E-02)); +#461144 = VECTOR('',#461145,1.); +#461145 = DIRECTION('',(8.589090866264E-03,0.999963113079,0.)); +#461146 = ORIENTED_EDGE('',*,*,#461147,.T.); +#461147 = EDGE_CURVE('',#461140,#461148,#461150,.T.); +#461148 = VERTEX_POINT('',#461149); +#461149 = CARTESIAN_POINT('',(151.808072,-142.582819,-7.5E-02)); +#461150 = LINE('',#461151,#461152); +#461151 = CARTESIAN_POINT('',(151.74805,-142.702139,-7.5E-02)); +#461152 = VECTOR('',#461153,1.); +#461153 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#461154 = ORIENTED_EDGE('',*,*,#461155,.T.); +#461155 = EDGE_CURVE('',#461148,#461024,#461156,.T.); +#461156 = LINE('',#461157,#461158); +#461157 = CARTESIAN_POINT('',(151.808072,-142.582819,-7.5E-02)); +#461158 = VECTOR('',#461159,1.); +#461159 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#461160 = FACE_BOUND('',#461161,.T.); +#461161 = EDGE_LOOP('',(#461162,#461173,#461181,#461189,#461197,#461205, + #461213,#461221,#461229,#461237)); +#461162 = ORIENTED_EDGE('',*,*,#461163,.T.); +#461163 = EDGE_CURVE('',#461164,#461166,#461168,.T.); +#461164 = VERTEX_POINT('',#461165); +#461165 = CARTESIAN_POINT('',(152.337617,-142.611647,-7.5E-02)); +#461166 = VERTEX_POINT('',#461167); +#461167 = CARTESIAN_POINT('',(151.920664,-142.611647,-7.5E-02)); +#461168 = CIRCLE('',#461169,0.382072162856); +#461169 = AXIS2_PLACEMENT_3D('',#461170,#461171,#461172); +#461170 = CARTESIAN_POINT('',(152.1291405,-142.9318292708,-7.5E-02)); +#461171 = DIRECTION('',(0.,0.,1.)); +#461172 = DIRECTION('',(0.545646922932,0.838015176172,-0.)); +#461173 = ORIENTED_EDGE('',*,*,#461174,.T.); +#461174 = EDGE_CURVE('',#461166,#461175,#461177,.T.); +#461175 = VERTEX_POINT('',#461176); +#461176 = CARTESIAN_POINT('',(151.884519,-142.647791,-7.5E-02)); +#461177 = LINE('',#461178,#461179); +#461178 = CARTESIAN_POINT('',(151.920664,-142.611647,-7.5E-02)); +#461179 = VECTOR('',#461180,1.); +#461180 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#461181 = ORIENTED_EDGE('',*,*,#461182,.T.); +#461182 = EDGE_CURVE('',#461175,#461183,#461185,.T.); +#461183 = VERTEX_POINT('',#461184); +#461184 = CARTESIAN_POINT('',(151.845808,-142.725215,-7.5E-02)); +#461185 = LINE('',#461186,#461187); +#461186 = CARTESIAN_POINT('',(151.884519,-142.647791,-7.5E-02)); +#461187 = VECTOR('',#461188,1.); +#461188 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#461189 = ORIENTED_EDGE('',*,*,#461190,.T.); +#461190 = EDGE_CURVE('',#461183,#461191,#461193,.T.); +#461191 = VERTEX_POINT('',#461192); +#461192 = CARTESIAN_POINT('',(151.845808,-142.892085,-7.5E-02)); +#461193 = LINE('',#461194,#461195); +#461194 = CARTESIAN_POINT('',(151.845808,-142.725215,-7.5E-02)); +#461195 = VECTOR('',#461196,1.); +#461196 = DIRECTION('',(0.,-1.,0.)); +#461197 = ORIENTED_EDGE('',*,*,#461198,.T.); +#461198 = EDGE_CURVE('',#461191,#461199,#461201,.T.); +#461199 = VERTEX_POINT('',#461200); +#461200 = CARTESIAN_POINT('',(151.874328,-142.949126,-7.5E-02)); +#461201 = LINE('',#461202,#461203); +#461202 = CARTESIAN_POINT('',(151.845808,-142.892085,-7.5E-02)); +#461203 = VECTOR('',#461204,1.); +#461204 = DIRECTION('',(0.447207323296,-0.894430327074,0.)); +#461205 = ORIENTED_EDGE('',*,*,#461206,.T.); +#461206 = EDGE_CURVE('',#461199,#461207,#461209,.T.); +#461207 = VERTEX_POINT('',#461208); +#461208 = CARTESIAN_POINT('',(152.383954,-142.949126,-7.5E-02)); +#461209 = LINE('',#461210,#461211); +#461210 = CARTESIAN_POINT('',(151.874328,-142.949126,-7.5E-02)); +#461211 = VECTOR('',#461212,1.); +#461212 = DIRECTION('',(1.,0.,0.)); +#461213 = ORIENTED_EDGE('',*,*,#461214,.T.); +#461214 = EDGE_CURVE('',#461207,#461215,#461217,.T.); +#461215 = VERTEX_POINT('',#461216); +#461216 = CARTESIAN_POINT('',(152.412475,-142.892084,-7.5E-02)); +#461217 = LINE('',#461218,#461219); +#461218 = CARTESIAN_POINT('',(152.383954,-142.949126,-7.5E-02)); +#461219 = VECTOR('',#461220,1.); +#461220 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#461221 = ORIENTED_EDGE('',*,*,#461222,.T.); +#461222 = EDGE_CURVE('',#461215,#461223,#461225,.T.); +#461223 = VERTEX_POINT('',#461224); +#461224 = CARTESIAN_POINT('',(152.412475,-142.725215,-7.5E-02)); +#461225 = LINE('',#461226,#461227); +#461226 = CARTESIAN_POINT('',(152.412475,-142.892084,-7.5E-02)); +#461227 = VECTOR('',#461228,1.); +#461228 = DIRECTION('',(0.,1.,0.)); +#461229 = ORIENTED_EDGE('',*,*,#461230,.T.); +#461230 = EDGE_CURVE('',#461223,#461231,#461233,.T.); +#461231 = VERTEX_POINT('',#461232); +#461232 = CARTESIAN_POINT('',(152.373764,-142.647793,-7.5E-02)); +#461233 = LINE('',#461234,#461235); +#461234 = CARTESIAN_POINT('',(152.412475,-142.725215,-7.5E-02)); +#461235 = VECTOR('',#461236,1.); +#461236 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#461237 = ORIENTED_EDGE('',*,*,#461238,.T.); +#461238 = EDGE_CURVE('',#461231,#461164,#461239,.T.); +#461239 = LINE('',#461240,#461241); +#461240 = CARTESIAN_POINT('',(152.373764,-142.647793,-7.5E-02)); +#461241 = VECTOR('',#461242,1.); +#461242 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#461243 = PLANE('',#461244); +#461244 = AXIS2_PLACEMENT_3D('',#461245,#461246,#461247); +#461245 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461246 = DIRECTION('',(-0.,-0.,-1.)); +#461247 = DIRECTION('',(-1.,0.,0.)); +#461248 = SHELL_BASED_SURFACE_MODEL('',(#461249)); +#461249 = OPEN_SHELL('',(#461250)); +#461250 = ADVANCED_FACE('',(#461251),#461293,.T.); +#461251 = FACE_BOUND('',#461252,.T.); +#461252 = EDGE_LOOP('',(#461253,#461263,#461271,#461279,#461287)); +#461253 = ORIENTED_EDGE('',*,*,#461254,.T.); +#461254 = EDGE_CURVE('',#461255,#461257,#461259,.T.); +#461255 = VERTEX_POINT('',#461256); +#461256 = CARTESIAN_POINT('',(134.044046,-142.765406,-7.5E-02)); +#461257 = VERTEX_POINT('',#461258); +#461258 = CARTESIAN_POINT('',(134.044046,-142.477316,-7.5E-02)); +#461259 = LINE('',#461260,#461261); +#461260 = CARTESIAN_POINT('',(134.044046,-142.765406,-7.5E-02)); +#461261 = VECTOR('',#461262,1.); +#461262 = DIRECTION('',(0.,1.,0.)); +#461263 = ORIENTED_EDGE('',*,*,#461264,.T.); +#461264 = EDGE_CURVE('',#461257,#461265,#461267,.T.); +#461265 = VERTEX_POINT('',#461266); +#461266 = CARTESIAN_POINT('',(134.332136,-142.477316,-7.5E-02)); +#461267 = LINE('',#461268,#461269); +#461268 = CARTESIAN_POINT('',(134.044046,-142.477316,-7.5E-02)); +#461269 = VECTOR('',#461270,1.); +#461270 = DIRECTION('',(1.,0.,0.)); +#461271 = ORIENTED_EDGE('',*,*,#461272,.T.); +#461272 = EDGE_CURVE('',#461265,#461273,#461275,.T.); +#461273 = VERTEX_POINT('',#461274); +#461274 = CARTESIAN_POINT('',(134.332136,-142.621361,-7.5E-02)); +#461275 = LINE('',#461276,#461277); +#461276 = CARTESIAN_POINT('',(134.332136,-142.477316,-7.5E-02)); +#461277 = VECTOR('',#461278,1.); +#461278 = DIRECTION('',(0.,-1.,0.)); +#461279 = ORIENTED_EDGE('',*,*,#461280,.T.); +#461280 = EDGE_CURVE('',#461273,#461281,#461283,.T.); +#461281 = VERTEX_POINT('',#461282); +#461282 = CARTESIAN_POINT('',(134.332136,-142.765406,-7.5E-02)); +#461283 = LINE('',#461284,#461285); +#461284 = CARTESIAN_POINT('',(134.332136,-142.621361,-7.5E-02)); +#461285 = VECTOR('',#461286,1.); +#461286 = DIRECTION('',(0.,-1.,0.)); +#461287 = ORIENTED_EDGE('',*,*,#461288,.T.); +#461288 = EDGE_CURVE('',#461281,#461255,#461289,.T.); +#461289 = LINE('',#461290,#461291); +#461290 = CARTESIAN_POINT('',(134.332136,-142.765406,-7.5E-02)); +#461291 = VECTOR('',#461292,1.); +#461292 = DIRECTION('',(-1.,0.,0.)); +#461293 = PLANE('',#461294); +#461294 = AXIS2_PLACEMENT_3D('',#461295,#461296,#461297); +#461295 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461296 = DIRECTION('',(-0.,-0.,-1.)); +#461297 = DIRECTION('',(-1.,0.,0.)); +#461298 = SHELL_BASED_SURFACE_MODEL('',(#461299)); +#461299 = OPEN_SHELL('',(#461300)); +#461300 = ADVANCED_FACE('',(#461301),#461343,.T.); +#461301 = FACE_BOUND('',#461302,.T.); +#461302 = EDGE_LOOP('',(#461303,#461313,#461321,#461329,#461337)); +#461303 = ORIENTED_EDGE('',*,*,#461304,.T.); +#461304 = EDGE_CURVE('',#461305,#461307,#461309,.T.); +#461305 = VERTEX_POINT('',#461306); +#461306 = CARTESIAN_POINT('',(136.060681,-142.765406,-7.5E-02)); +#461307 = VERTEX_POINT('',#461308); +#461308 = CARTESIAN_POINT('',(136.060681,-142.189225,-7.5E-02)); +#461309 = LINE('',#461310,#461311); +#461310 = CARTESIAN_POINT('',(136.060681,-142.765406,-7.5E-02)); +#461311 = VECTOR('',#461312,1.); +#461312 = DIRECTION('',(0.,1.,0.)); +#461313 = ORIENTED_EDGE('',*,*,#461314,.T.); +#461314 = EDGE_CURVE('',#461307,#461315,#461317,.T.); +#461315 = VERTEX_POINT('',#461316); +#461316 = CARTESIAN_POINT('',(136.348771,-142.189225,-7.5E-02)); +#461317 = LINE('',#461318,#461319); +#461318 = CARTESIAN_POINT('',(136.060681,-142.189225,-7.5E-02)); +#461319 = VECTOR('',#461320,1.); +#461320 = DIRECTION('',(1.,0.,0.)); +#461321 = ORIENTED_EDGE('',*,*,#461322,.T.); +#461322 = EDGE_CURVE('',#461315,#461323,#461325,.T.); +#461323 = VERTEX_POINT('',#461324); +#461324 = CARTESIAN_POINT('',(136.348771,-142.477316,-7.5E-02)); +#461325 = LINE('',#461326,#461327); +#461326 = CARTESIAN_POINT('',(136.348771,-142.189225,-7.5E-02)); +#461327 = VECTOR('',#461328,1.); +#461328 = DIRECTION('',(0.,-1.,0.)); +#461329 = ORIENTED_EDGE('',*,*,#461330,.T.); +#461330 = EDGE_CURVE('',#461323,#461331,#461333,.T.); +#461331 = VERTEX_POINT('',#461332); +#461332 = CARTESIAN_POINT('',(136.348771,-142.765406,-7.5E-02)); +#461333 = LINE('',#461334,#461335); +#461334 = CARTESIAN_POINT('',(136.348771,-142.477316,-7.5E-02)); +#461335 = VECTOR('',#461336,1.); +#461336 = DIRECTION('',(0.,-1.,0.)); +#461337 = ORIENTED_EDGE('',*,*,#461338,.T.); +#461338 = EDGE_CURVE('',#461331,#461305,#461339,.T.); +#461339 = LINE('',#461340,#461341); +#461340 = CARTESIAN_POINT('',(136.348771,-142.765406,-7.5E-02)); +#461341 = VECTOR('',#461342,1.); +#461342 = DIRECTION('',(-1.,0.,0.)); +#461343 = PLANE('',#461344); +#461344 = AXIS2_PLACEMENT_3D('',#461345,#461346,#461347); +#461345 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461346 = DIRECTION('',(-0.,-0.,-1.)); +#461347 = DIRECTION('',(-1.,0.,0.)); +#461348 = SHELL_BASED_SURFACE_MODEL('',(#461349)); +#461349 = OPEN_SHELL('',(#461350)); +#461350 = ADVANCED_FACE('',(#461351),#461629,.T.); +#461351 = FACE_BOUND('',#461352,.T.); +#461352 = EDGE_LOOP('',(#461353,#461364,#461372,#461380,#461388,#461396, + #461404,#461412,#461420,#461428,#461436,#461444,#461452,#461461, + #461469,#461477,#461485,#461494,#461502,#461510,#461518,#461526, + #461534,#461542,#461550,#461558,#461566,#461574,#461582,#461590, + #461599,#461607,#461615,#461623)); +#461353 = ORIENTED_EDGE('',*,*,#461354,.T.); +#461354 = EDGE_CURVE('',#461355,#461357,#461359,.T.); +#461355 = VERTEX_POINT('',#461356); +#461356 = CARTESIAN_POINT('',(153.974926,-142.145525,-7.5E-02)); +#461357 = VERTEX_POINT('',#461358); +#461358 = CARTESIAN_POINT('',(154.069521,-142.119619,-7.5E-02)); +#461359 = CIRCLE('',#461360,4.999982421472E-02); +#461360 = AXIS2_PLACEMENT_3D('',#461361,#461362,#461363); +#461361 = CARTESIAN_POINT('',(154.02479999487,-142.1419799955,-7.5E-02) + ); +#461362 = DIRECTION('',(0.,0.,-1.)); +#461363 = DIRECTION('',(-0.9974834044,-7.090033812353E-02,-0.)); +#461364 = ORIENTED_EDGE('',*,*,#461365,.T.); +#461365 = EDGE_CURVE('',#461357,#461366,#461368,.T.); +#461366 = VERTEX_POINT('',#461367); +#461367 = CARTESIAN_POINT('',(154.120176,-142.225945,-7.5E-02)); +#461368 = LINE('',#461369,#461370); +#461369 = CARTESIAN_POINT('',(154.069521,-142.119619,-7.5E-02)); +#461370 = VECTOR('',#461371,1.); +#461371 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#461372 = ORIENTED_EDGE('',*,*,#461373,.T.); +#461373 = EDGE_CURVE('',#461366,#461374,#461376,.T.); +#461374 = VERTEX_POINT('',#461375); +#461375 = CARTESIAN_POINT('',(154.120176,-142.438966,-7.5E-02)); +#461376 = LINE('',#461377,#461378); +#461377 = CARTESIAN_POINT('',(154.120176,-142.225945,-7.5E-02)); +#461378 = VECTOR('',#461379,1.); +#461379 = DIRECTION('',(0.,-1.,0.)); +#461380 = ORIENTED_EDGE('',*,*,#461381,.T.); +#461381 = EDGE_CURVE('',#461374,#461382,#461384,.T.); +#461382 = VERTEX_POINT('',#461383); +#461383 = CARTESIAN_POINT('',(154.062572,-142.555692,-7.5E-02)); +#461384 = LINE('',#461385,#461386); +#461385 = CARTESIAN_POINT('',(154.120176,-142.438966,-7.5E-02)); +#461386 = VECTOR('',#461387,1.); +#461387 = DIRECTION('',(-0.442542699539,-0.896747433275,0.)); +#461388 = ORIENTED_EDGE('',*,*,#461389,.T.); +#461389 = EDGE_CURVE('',#461382,#461390,#461392,.T.); +#461390 = VERTEX_POINT('',#461391); +#461391 = CARTESIAN_POINT('',(154.04716,-142.567654,-7.5E-02)); +#461392 = LINE('',#461393,#461394); +#461393 = CARTESIAN_POINT('',(154.062572,-142.555692,-7.5E-02)); +#461394 = VECTOR('',#461395,1.); +#461395 = DIRECTION('',(-0.789975570356,-0.613138319012,0.)); +#461396 = ORIENTED_EDGE('',*,*,#461397,.T.); +#461397 = EDGE_CURVE('',#461390,#461398,#461400,.T.); +#461398 = VERTEX_POINT('',#461399); +#461399 = CARTESIAN_POINT('',(153.940829,-142.618309,-7.5E-02)); +#461400 = LINE('',#461401,#461402); +#461401 = CARTESIAN_POINT('',(154.04716,-142.567654,-7.5E-02)); +#461402 = VECTOR('',#461403,1.); +#461403 = DIRECTION('',(-0.902790669215,-0.430080233884,0.)); +#461404 = ORIENTED_EDGE('',*,*,#461405,.T.); +#461405 = EDGE_CURVE('',#461398,#461406,#461408,.T.); +#461406 = VERTEX_POINT('',#461407); +#461407 = CARTESIAN_POINT('',(153.870669,-142.618308,-7.5E-02)); +#461408 = LINE('',#461409,#461410); +#461409 = CARTESIAN_POINT('',(153.940829,-142.618309,-7.5E-02)); +#461410 = VECTOR('',#461411,1.); +#461411 = DIRECTION('',(-0.999999999898,1.425313565242E-05,0.)); +#461412 = ORIENTED_EDGE('',*,*,#461413,.T.); +#461413 = EDGE_CURVE('',#461406,#461414,#461416,.T.); +#461414 = VERTEX_POINT('',#461415); +#461415 = CARTESIAN_POINT('',(153.753944,-142.560704,-7.5E-02)); +#461416 = LINE('',#461417,#461418); +#461417 = CARTESIAN_POINT('',(153.870669,-142.618308,-7.5E-02)); +#461418 = VECTOR('',#461419,1.); +#461419 = DIRECTION('',(-0.896745928687,0.44254574835,0.)); +#461420 = ORIENTED_EDGE('',*,*,#461421,.T.); +#461421 = EDGE_CURVE('',#461414,#461422,#461424,.T.); +#461422 = VERTEX_POINT('',#461423); +#461423 = CARTESIAN_POINT('',(153.741982,-142.545292,-7.5E-02)); +#461424 = LINE('',#461425,#461426); +#461425 = CARTESIAN_POINT('',(153.753944,-142.560704,-7.5E-02)); +#461426 = VECTOR('',#461427,1.); +#461427 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#461428 = ORIENTED_EDGE('',*,*,#461429,.T.); +#461429 = EDGE_CURVE('',#461422,#461430,#461432,.T.); +#461430 = VERTEX_POINT('',#461431); +#461431 = CARTESIAN_POINT('',(153.691327,-142.438966,-7.5E-02)); +#461432 = LINE('',#461433,#461434); +#461433 = CARTESIAN_POINT('',(153.741982,-142.545292,-7.5E-02)); +#461434 = VECTOR('',#461435,1.); +#461435 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#461436 = ORIENTED_EDGE('',*,*,#461437,.T.); +#461437 = EDGE_CURVE('',#461430,#461438,#461440,.T.); +#461438 = VERTEX_POINT('',#461439); +#461439 = CARTESIAN_POINT('',(153.689085,-142.29664,-7.5E-02)); +#461440 = LINE('',#461441,#461442); +#461441 = CARTESIAN_POINT('',(153.691327,-142.438966,-7.5E-02)); +#461442 = VECTOR('',#461443,1.); +#461443 = DIRECTION('',(-1.575061396373E-02,0.999875951386,0.)); +#461444 = ORIENTED_EDGE('',*,*,#461445,.T.); +#461445 = EDGE_CURVE('',#461438,#461446,#461448,.T.); +#461446 = VERTEX_POINT('',#461447); +#461447 = CARTESIAN_POINT('',(153.654198,-142.226866,-7.5E-02)); +#461448 = LINE('',#461449,#461450); +#461449 = CARTESIAN_POINT('',(153.689085,-142.29664,-7.5E-02)); +#461450 = VECTOR('',#461451,1.); +#461451 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#461452 = ORIENTED_EDGE('',*,*,#461453,.T.); +#461453 = EDGE_CURVE('',#461446,#461454,#461456,.T.); +#461454 = VERTEX_POINT('',#461455); +#461455 = CARTESIAN_POINT('',(153.490638,-142.226866,-7.5E-02)); +#461456 = CIRCLE('',#461457,0.111877522228); +#461457 = AXIS2_PLACEMENT_3D('',#461458,#461459,#461460); +#461458 = CARTESIAN_POINT('',(153.572418,-142.3032113441,-7.5E-02)); +#461459 = DIRECTION('',(0.,0.,1.)); +#461460 = DIRECTION('',(0.73097793347,0.682401099632,-0.)); +#461461 = ORIENTED_EDGE('',*,*,#461462,.T.); +#461462 = EDGE_CURVE('',#461454,#461463,#461465,.T.); +#461463 = VERTEX_POINT('',#461464); +#461464 = CARTESIAN_POINT('',(153.455752,-142.29664,-7.5E-02)); +#461465 = LINE('',#461466,#461467); +#461466 = CARTESIAN_POINT('',(153.490638,-142.226866,-7.5E-02)); +#461467 = VECTOR('',#461468,1.); +#461468 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#461469 = ORIENTED_EDGE('',*,*,#461470,.T.); +#461470 = EDGE_CURVE('',#461463,#461471,#461473,.T.); +#461471 = VERTEX_POINT('',#461472); +#461472 = CARTESIAN_POINT('',(153.455752,-142.415891,-7.5E-02)); +#461473 = LINE('',#461474,#461475); +#461474 = CARTESIAN_POINT('',(153.455752,-142.29664,-7.5E-02)); +#461475 = VECTOR('',#461476,1.); +#461476 = DIRECTION('',(0.,-1.,0.)); +#461477 = ORIENTED_EDGE('',*,*,#461478,.T.); +#461478 = EDGE_CURVE('',#461471,#461479,#461481,.T.); +#461479 = VERTEX_POINT('',#461480); +#461480 = CARTESIAN_POINT('',(153.498092,-142.500571,-7.5E-02)); +#461481 = LINE('',#461482,#461483); +#461482 = CARTESIAN_POINT('',(153.455752,-142.415891,-7.5E-02)); +#461483 = VECTOR('',#461484,1.); +#461484 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#461485 = ORIENTED_EDGE('',*,*,#461486,.T.); +#461486 = EDGE_CURVE('',#461479,#461487,#461489,.T.); +#461487 = VERTEX_POINT('',#461488); +#461488 = CARTESIAN_POINT('',(153.408649,-142.545292,-7.5E-02)); +#461489 = CIRCLE('',#461490,5.000004522505E-02); +#461490 = AXIS2_PLACEMENT_3D('',#461491,#461492,#461493); +#461491 = CARTESIAN_POINT('',(153.45337053675,-142.5229315735,-7.5E-02) + ); +#461492 = DIRECTION('',(0.,0.,-1.)); +#461493 = DIRECTION('',(0.894428455807,0.447211065876,0.)); +#461494 = ORIENTED_EDGE('',*,*,#461495,.T.); +#461495 = EDGE_CURVE('',#461487,#461496,#461498,.T.); +#461496 = VERTEX_POINT('',#461497); +#461497 = CARTESIAN_POINT('',(153.357994,-142.438966,-7.5E-02)); +#461498 = LINE('',#461499,#461500); +#461499 = CARTESIAN_POINT('',(153.408649,-142.545292,-7.5E-02)); +#461500 = VECTOR('',#461501,1.); +#461501 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#461502 = ORIENTED_EDGE('',*,*,#461503,.T.); +#461503 = EDGE_CURVE('',#461496,#461504,#461506,.T.); +#461504 = VERTEX_POINT('',#461505); +#461505 = CARTESIAN_POINT('',(153.357994,-142.273564,-7.5E-02)); +#461506 = LINE('',#461507,#461508); +#461507 = CARTESIAN_POINT('',(153.357994,-142.438966,-7.5E-02)); +#461508 = VECTOR('',#461509,1.); +#461509 = DIRECTION('',(0.,1.,0.)); +#461510 = ORIENTED_EDGE('',*,*,#461511,.T.); +#461511 = EDGE_CURVE('',#461504,#461512,#461514,.T.); +#461512 = VERTEX_POINT('',#461513); +#461513 = CARTESIAN_POINT('',(153.415598,-142.156839,-7.5E-02)); +#461514 = LINE('',#461515,#461516); +#461515 = CARTESIAN_POINT('',(153.357994,-142.273564,-7.5E-02)); +#461516 = VECTOR('',#461517,1.); +#461517 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#461518 = ORIENTED_EDGE('',*,*,#461519,.T.); +#461519 = EDGE_CURVE('',#461512,#461520,#461522,.T.); +#461520 = VERTEX_POINT('',#461521); +#461521 = CARTESIAN_POINT('',(153.43101,-142.144878,-7.5E-02)); +#461522 = LINE('',#461523,#461524); +#461523 = CARTESIAN_POINT('',(153.415598,-142.156839,-7.5E-02)); +#461524 = VECTOR('',#461525,1.); +#461525 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#461526 = ORIENTED_EDGE('',*,*,#461527,.T.); +#461527 = EDGE_CURVE('',#461520,#461528,#461530,.T.); +#461528 = VERTEX_POINT('',#461529); +#461529 = CARTESIAN_POINT('',(153.537336,-142.094222,-7.5E-02)); +#461530 = LINE('',#461531,#461532); +#461531 = CARTESIAN_POINT('',(153.43101,-142.144878,-7.5E-02)); +#461532 = VECTOR('',#461533,1.); +#461533 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#461534 = ORIENTED_EDGE('',*,*,#461535,.T.); +#461535 = EDGE_CURVE('',#461528,#461536,#461538,.T.); +#461536 = VERTEX_POINT('',#461537); +#461537 = CARTESIAN_POINT('',(153.598684,-142.092468,-7.5E-02)); +#461538 = LINE('',#461539,#461540); +#461539 = CARTESIAN_POINT('',(153.537336,-142.094222,-7.5E-02)); +#461540 = VECTOR('',#461541,1.); +#461541 = DIRECTION('',(0.999591528081,2.857931049521E-02,0.)); +#461542 = ORIENTED_EDGE('',*,*,#461543,.T.); +#461543 = EDGE_CURVE('',#461536,#461544,#461546,.T.); +#461544 = VERTEX_POINT('',#461545); +#461545 = CARTESIAN_POINT('',(153.618589,-142.097259,-7.5E-02)); +#461546 = LINE('',#461547,#461548); +#461547 = CARTESIAN_POINT('',(153.598684,-142.092468,-7.5E-02)); +#461548 = VECTOR('',#461549,1.); +#461549 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#461550 = ORIENTED_EDGE('',*,*,#461551,.T.); +#461551 = EDGE_CURVE('',#461544,#461552,#461554,.T.); +#461552 = VERTEX_POINT('',#461553); +#461553 = CARTESIAN_POINT('',(153.726417,-142.154649,-7.5E-02)); +#461554 = LINE('',#461555,#461556); +#461555 = CARTESIAN_POINT('',(153.618589,-142.097259,-7.5E-02)); +#461556 = VECTOR('',#461557,1.); +#461557 = DIRECTION('',(0.882754645264,-0.469834264678,0.)); +#461558 = ORIENTED_EDGE('',*,*,#461559,.T.); +#461559 = EDGE_CURVE('',#461552,#461560,#461562,.T.); +#461560 = VERTEX_POINT('',#461561); +#461561 = CARTESIAN_POINT('',(153.785279,-142.265703,-7.5E-02)); +#461562 = LINE('',#461563,#461564); +#461563 = CARTESIAN_POINT('',(153.726417,-142.154649,-7.5E-02)); +#461564 = VECTOR('',#461565,1.); +#461565 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#461566 = ORIENTED_EDGE('',*,*,#461567,.T.); +#461567 = EDGE_CURVE('',#461560,#461568,#461570,.T.); +#461568 = VERTEX_POINT('',#461569); +#461569 = CARTESIAN_POINT('',(153.789085,-142.284837,-7.5E-02)); +#461570 = LINE('',#461571,#461572); +#461571 = CARTESIAN_POINT('',(153.785279,-142.265703,-7.5E-02)); +#461572 = VECTOR('',#461573,1.); +#461573 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#461574 = ORIENTED_EDGE('',*,*,#461575,.T.); +#461575 = EDGE_CURVE('',#461568,#461576,#461578,.T.); +#461576 = VERTEX_POINT('',#461577); +#461577 = CARTESIAN_POINT('',(153.789085,-142.415891,-7.5E-02)); +#461578 = LINE('',#461579,#461580); +#461579 = CARTESIAN_POINT('',(153.789085,-142.284837,-7.5E-02)); +#461580 = VECTOR('',#461581,1.); +#461581 = DIRECTION('',(0.,-1.,0.)); +#461582 = ORIENTED_EDGE('',*,*,#461583,.T.); +#461583 = EDGE_CURVE('',#461576,#461584,#461586,.T.); +#461584 = VERTEX_POINT('',#461585); +#461585 = CARTESIAN_POINT('',(153.823971,-142.485664,-7.5E-02)); +#461586 = LINE('',#461587,#461588); +#461587 = CARTESIAN_POINT('',(153.789085,-142.415891,-7.5E-02)); +#461588 = VECTOR('',#461589,1.); +#461589 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#461590 = ORIENTED_EDGE('',*,*,#461591,.T.); +#461591 = EDGE_CURVE('',#461584,#461592,#461594,.T.); +#461592 = VERTEX_POINT('',#461593); +#461593 = CARTESIAN_POINT('',(153.987532,-142.485664,-7.5E-02)); +#461594 = CIRCLE('',#461595,0.111876864088); +#461595 = AXIS2_PLACEMENT_3D('',#461596,#461597,#461598); +#461596 = CARTESIAN_POINT('',(153.9057515,-142.4093201558,-7.5E-02)); +#461597 = DIRECTION('',(0.,0.,1.)); +#461598 = DIRECTION('',(-0.730986702803,-0.682391705932,0.)); +#461599 = ORIENTED_EDGE('',*,*,#461600,.T.); +#461600 = EDGE_CURVE('',#461592,#461601,#461603,.T.); +#461601 = VERTEX_POINT('',#461602); +#461602 = CARTESIAN_POINT('',(154.022419,-142.41589,-7.5E-02)); +#461603 = LINE('',#461604,#461605); +#461604 = CARTESIAN_POINT('',(153.987532,-142.485664,-7.5E-02)); +#461605 = VECTOR('',#461606,1.); +#461606 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#461607 = ORIENTED_EDGE('',*,*,#461608,.T.); +#461608 = EDGE_CURVE('',#461601,#461609,#461611,.T.); +#461609 = VERTEX_POINT('',#461610); +#461610 = CARTESIAN_POINT('',(154.022419,-142.249021,-7.5E-02)); +#461611 = LINE('',#461612,#461613); +#461612 = CARTESIAN_POINT('',(154.022419,-142.41589,-7.5E-02)); +#461613 = VECTOR('',#461614,1.); +#461614 = DIRECTION('',(0.,1.,0.)); +#461615 = ORIENTED_EDGE('',*,*,#461616,.T.); +#461616 = EDGE_CURVE('',#461609,#461617,#461619,.T.); +#461617 = VERTEX_POINT('',#461618); +#461618 = CARTESIAN_POINT('',(153.980079,-142.164341,-7.5E-02)); +#461619 = LINE('',#461620,#461621); +#461620 = CARTESIAN_POINT('',(154.022419,-142.249021,-7.5E-02)); +#461621 = VECTOR('',#461622,1.); +#461622 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#461623 = ORIENTED_EDGE('',*,*,#461624,.T.); +#461624 = EDGE_CURVE('',#461617,#461355,#461625,.T.); +#461625 = LINE('',#461626,#461627); +#461626 = CARTESIAN_POINT('',(153.980079,-142.164341,-7.5E-02)); +#461627 = VECTOR('',#461628,1.); +#461628 = DIRECTION('',(-0.264136520178,0.964485302484,0.)); +#461629 = PLANE('',#461630); +#461630 = AXIS2_PLACEMENT_3D('',#461631,#461632,#461633); +#461631 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461632 = DIRECTION('',(-0.,-0.,-1.)); +#461633 = DIRECTION('',(-1.,0.,0.)); +#461634 = SHELL_BASED_SURFACE_MODEL('',(#461635)); +#461635 = OPEN_SHELL('',(#461636)); +#461636 = ADVANCED_FACE('',(#461637),#461695,.T.); +#461637 = FACE_BOUND('',#461638,.T.); +#461638 = EDGE_LOOP('',(#461639,#461649,#461657,#461665,#461673,#461681, + #461689)); +#461639 = ORIENTED_EDGE('',*,*,#461640,.T.); +#461640 = EDGE_CURVE('',#461641,#461643,#461645,.T.); +#461641 = VERTEX_POINT('',#461642); +#461642 = CARTESIAN_POINT('',(136.348771,-141.901134,-7.5E-02)); +#461643 = VERTEX_POINT('',#461644); +#461644 = CARTESIAN_POINT('',(136.636862,-141.901134,-7.5E-02)); +#461645 = LINE('',#461646,#461647); +#461646 = CARTESIAN_POINT('',(136.348771,-141.901134,-7.5E-02)); +#461647 = VECTOR('',#461648,1.); +#461648 = DIRECTION('',(1.,0.,0.)); +#461649 = ORIENTED_EDGE('',*,*,#461650,.T.); +#461650 = EDGE_CURVE('',#461643,#461651,#461653,.T.); +#461651 = VERTEX_POINT('',#461652); +#461652 = CARTESIAN_POINT('',(136.924953,-141.901134,-7.5E-02)); +#461653 = LINE('',#461654,#461655); +#461654 = CARTESIAN_POINT('',(136.636862,-141.901134,-7.5E-02)); +#461655 = VECTOR('',#461656,1.); +#461656 = DIRECTION('',(1.,0.,0.)); +#461657 = ORIENTED_EDGE('',*,*,#461658,.T.); +#461658 = EDGE_CURVE('',#461651,#461659,#461661,.T.); +#461659 = VERTEX_POINT('',#461660); +#461660 = CARTESIAN_POINT('',(136.924953,-142.477316,-7.5E-02)); +#461661 = LINE('',#461662,#461663); +#461662 = CARTESIAN_POINT('',(136.924953,-141.901134,-7.5E-02)); +#461663 = VECTOR('',#461664,1.); +#461664 = DIRECTION('',(0.,-1.,0.)); +#461665 = ORIENTED_EDGE('',*,*,#461666,.T.); +#461666 = EDGE_CURVE('',#461659,#461667,#461669,.T.); +#461667 = VERTEX_POINT('',#461668); +#461668 = CARTESIAN_POINT('',(136.636862,-142.477316,-7.5E-02)); +#461669 = LINE('',#461670,#461671); +#461670 = CARTESIAN_POINT('',(136.924953,-142.477316,-7.5E-02)); +#461671 = VECTOR('',#461672,1.); +#461672 = DIRECTION('',(-1.,0.,0.)); +#461673 = ORIENTED_EDGE('',*,*,#461674,.T.); +#461674 = EDGE_CURVE('',#461667,#461675,#461677,.T.); +#461675 = VERTEX_POINT('',#461676); +#461676 = CARTESIAN_POINT('',(136.636862,-142.189225,-7.5E-02)); +#461677 = LINE('',#461678,#461679); +#461678 = CARTESIAN_POINT('',(136.636862,-142.477316,-7.5E-02)); +#461679 = VECTOR('',#461680,1.); +#461680 = DIRECTION('',(0.,1.,0.)); +#461681 = ORIENTED_EDGE('',*,*,#461682,.T.); +#461682 = EDGE_CURVE('',#461675,#461683,#461685,.T.); +#461683 = VERTEX_POINT('',#461684); +#461684 = CARTESIAN_POINT('',(136.348771,-142.189225,-7.5E-02)); +#461685 = LINE('',#461686,#461687); +#461686 = CARTESIAN_POINT('',(136.636862,-142.189225,-7.5E-02)); +#461687 = VECTOR('',#461688,1.); +#461688 = DIRECTION('',(-1.,0.,0.)); +#461689 = ORIENTED_EDGE('',*,*,#461690,.T.); +#461690 = EDGE_CURVE('',#461683,#461641,#461691,.T.); +#461691 = LINE('',#461692,#461693); +#461692 = CARTESIAN_POINT('',(136.348771,-142.189225,-7.5E-02)); +#461693 = VECTOR('',#461694,1.); +#461694 = DIRECTION('',(0.,1.,0.)); +#461695 = PLANE('',#461696); +#461696 = AXIS2_PLACEMENT_3D('',#461697,#461698,#461699); +#461697 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461698 = DIRECTION('',(-0.,-0.,-1.)); +#461699 = DIRECTION('',(-1.,0.,0.)); +#461700 = SHELL_BASED_SURFACE_MODEL('',(#461701)); +#461701 = OPEN_SHELL('',(#461702)); +#461702 = ADVANCED_FACE('',(#461703),#461852,.T.); +#461703 = FACE_BOUND('',#461704,.T.); +#461704 = EDGE_LOOP('',(#461705,#461716,#461724,#461733,#461741,#461749, + #461757,#461765,#461773,#461781,#461789,#461798,#461806,#461814, + #461822,#461830,#461838,#461846)); +#461705 = ORIENTED_EDGE('',*,*,#461706,.T.); +#461706 = EDGE_CURVE('',#461707,#461709,#461711,.T.); +#461707 = VERTEX_POINT('',#461708); +#461708 = CARTESIAN_POINT('',(151.776674,-141.711987,-7.5E-02)); +#461709 = VERTEX_POINT('',#461710); +#461710 = CARTESIAN_POINT('',(151.795808,-141.615793,-7.5E-02)); +#461711 = CIRCLE('',#461712,4.999998452109E-02); +#461712 = AXIS2_PLACEMENT_3D('',#461713,#461714,#461715); +#461713 = CARTESIAN_POINT('',(151.79580803736,-141.6657929845,-7.5E-02) + ); +#461714 = DIRECTION('',(0.,0.,-1.)); +#461715 = DIRECTION('',(-0.382680865852,-0.923880595592,-0.)); +#461716 = ORIENTED_EDGE('',*,*,#461717,.T.); +#461717 = EDGE_CURVE('',#461709,#461718,#461720,.T.); +#461718 = VERTEX_POINT('',#461719); +#461719 = CARTESIAN_POINT('',(152.462475,-141.615793,-7.5E-02)); +#461720 = LINE('',#461721,#461722); +#461721 = CARTESIAN_POINT('',(151.795808,-141.615793,-7.5E-02)); +#461722 = VECTOR('',#461723,1.); +#461723 = DIRECTION('',(1.,0.,0.)); +#461724 = ORIENTED_EDGE('',*,*,#461725,.T.); +#461725 = EDGE_CURVE('',#461718,#461726,#461728,.T.); +#461726 = VERTEX_POINT('',#461727); +#461727 = CARTESIAN_POINT('',(152.462475,-141.715793,-7.5E-02)); +#461728 = CIRCLE('',#461729,5.000000000002E-02); +#461729 = AXIS2_PLACEMENT_3D('',#461730,#461731,#461732); +#461730 = CARTESIAN_POINT('',(152.46247495228,-141.665793,-7.5E-02)); +#461731 = DIRECTION('',(0.,0.,-1.)); +#461732 = DIRECTION('',(9.542367251923E-07,1.,0.)); +#461733 = ORIENTED_EDGE('',*,*,#461734,.T.); +#461734 = EDGE_CURVE('',#461726,#461735,#461737,.T.); +#461735 = VERTEX_POINT('',#461736); +#461736 = CARTESIAN_POINT('',(151.911757,-141.715793,-7.5E-02)); +#461737 = LINE('',#461738,#461739); +#461738 = CARTESIAN_POINT('',(152.462475,-141.715793,-7.5E-02)); +#461739 = VECTOR('',#461740,1.); +#461740 = DIRECTION('',(-1.,0.,0.)); +#461741 = ORIENTED_EDGE('',*,*,#461742,.T.); +#461742 = EDGE_CURVE('',#461735,#461743,#461745,.T.); +#461743 = VERTEX_POINT('',#461744); +#461744 = CARTESIAN_POINT('',(151.884519,-141.743029,-7.5E-02)); +#461745 = LINE('',#461746,#461747); +#461746 = CARTESIAN_POINT('',(151.911757,-141.715793,-7.5E-02)); +#461747 = VECTOR('',#461748,1.); +#461748 = DIRECTION('',(-0.707132741967,-0.707080819453,0.)); +#461749 = ORIENTED_EDGE('',*,*,#461750,.T.); +#461750 = EDGE_CURVE('',#461743,#461751,#461753,.T.); +#461751 = VERTEX_POINT('',#461752); +#461752 = CARTESIAN_POINT('',(151.845808,-141.820453,-7.5E-02)); +#461753 = LINE('',#461754,#461755); +#461754 = CARTESIAN_POINT('',(151.884519,-141.743029,-7.5E-02)); +#461755 = VECTOR('',#461756,1.); +#461756 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#461757 = ORIENTED_EDGE('',*,*,#461758,.T.); +#461758 = EDGE_CURVE('',#461751,#461759,#461761,.T.); +#461759 = VERTEX_POINT('',#461760); +#461760 = CARTESIAN_POINT('',(151.845808,-141.939704,-7.5E-02)); +#461761 = LINE('',#461762,#461763); +#461762 = CARTESIAN_POINT('',(151.845808,-141.820453,-7.5E-02)); +#461763 = VECTOR('',#461764,1.); +#461764 = DIRECTION('',(0.,-1.,0.)); +#461765 = ORIENTED_EDGE('',*,*,#461766,.T.); +#461766 = EDGE_CURVE('',#461759,#461767,#461769,.T.); +#461767 = VERTEX_POINT('',#461768); +#461768 = CARTESIAN_POINT('',(151.880694,-142.009477,-7.5E-02)); +#461769 = LINE('',#461770,#461771); +#461770 = CARTESIAN_POINT('',(151.845808,-141.939704,-7.5E-02)); +#461771 = VECTOR('',#461772,1.); +#461772 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#461773 = ORIENTED_EDGE('',*,*,#461774,.T.); +#461774 = EDGE_CURVE('',#461767,#461775,#461777,.T.); +#461775 = VERTEX_POINT('',#461776); +#461776 = CARTESIAN_POINT('',(151.950469,-142.044364,-7.5E-02)); +#461777 = LINE('',#461778,#461779); +#461778 = CARTESIAN_POINT('',(151.880694,-142.009477,-7.5E-02)); +#461779 = VECTOR('',#461780,1.); +#461780 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#461781 = ORIENTED_EDGE('',*,*,#461782,.T.); +#461782 = EDGE_CURVE('',#461775,#461783,#461785,.T.); +#461783 = VERTEX_POINT('',#461784); +#461784 = CARTESIAN_POINT('',(152.462475,-142.044364,-7.5E-02)); +#461785 = LINE('',#461786,#461787); +#461786 = CARTESIAN_POINT('',(151.950469,-142.044364,-7.5E-02)); +#461787 = VECTOR('',#461788,1.); +#461788 = DIRECTION('',(1.,0.,0.)); +#461789 = ORIENTED_EDGE('',*,*,#461790,.T.); +#461790 = EDGE_CURVE('',#461783,#461791,#461793,.T.); +#461791 = VERTEX_POINT('',#461792); +#461792 = CARTESIAN_POINT('',(152.462475,-142.144364,-7.5E-02)); +#461793 = CIRCLE('',#461794,5.000000000003E-02); +#461794 = AXIS2_PLACEMENT_3D('',#461795,#461796,#461797); +#461795 = CARTESIAN_POINT('',(152.46247495228,-142.094364,-7.5E-02)); +#461796 = DIRECTION('',(0.,0.,-1.)); +#461797 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#461798 = ORIENTED_EDGE('',*,*,#461799,.T.); +#461799 = EDGE_CURVE('',#461791,#461800,#461802,.T.); +#461800 = VERTEX_POINT('',#461801); +#461801 = CARTESIAN_POINT('',(151.927392,-142.142121,-7.5E-02)); +#461802 = LINE('',#461803,#461804); +#461803 = CARTESIAN_POINT('',(152.462475,-142.144364,-7.5E-02)); +#461804 = VECTOR('',#461805,1.); +#461805 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#461806 = ORIENTED_EDGE('',*,*,#461807,.T.); +#461807 = EDGE_CURVE('',#461800,#461808,#461810,.T.); +#461808 = VERTEX_POINT('',#461809); +#461809 = CARTESIAN_POINT('',(151.810667,-142.084517,-7.5E-02)); +#461810 = LINE('',#461811,#461812); +#461811 = CARTESIAN_POINT('',(151.927392,-142.142121,-7.5E-02)); +#461812 = VECTOR('',#461813,1.); +#461813 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#461814 = ORIENTED_EDGE('',*,*,#461815,.T.); +#461815 = EDGE_CURVE('',#461808,#461816,#461818,.T.); +#461816 = VERTEX_POINT('',#461817); +#461817 = CARTESIAN_POINT('',(151.798705,-142.069105,-7.5E-02)); +#461818 = LINE('',#461819,#461820); +#461819 = CARTESIAN_POINT('',(151.810667,-142.084517,-7.5E-02)); +#461820 = VECTOR('',#461821,1.); +#461821 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#461822 = ORIENTED_EDGE('',*,*,#461823,.T.); +#461823 = EDGE_CURVE('',#461816,#461824,#461826,.T.); +#461824 = VERTEX_POINT('',#461825); +#461825 = CARTESIAN_POINT('',(151.74805,-141.962779,-7.5E-02)); +#461826 = LINE('',#461827,#461828); +#461827 = CARTESIAN_POINT('',(151.798705,-142.069105,-7.5E-02)); +#461828 = VECTOR('',#461829,1.); +#461829 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#461830 = ORIENTED_EDGE('',*,*,#461831,.T.); +#461831 = EDGE_CURVE('',#461824,#461832,#461834,.T.); +#461832 = VERTEX_POINT('',#461833); +#461833 = CARTESIAN_POINT('',(151.74805,-141.797377,-7.5E-02)); +#461834 = LINE('',#461835,#461836); +#461835 = CARTESIAN_POINT('',(151.74805,-141.962779,-7.5E-02)); +#461836 = VECTOR('',#461837,1.); +#461837 = DIRECTION('',(0.,1.,0.)); +#461838 = ORIENTED_EDGE('',*,*,#461839,.T.); +#461839 = EDGE_CURVE('',#461832,#461840,#461842,.T.); +#461840 = VERTEX_POINT('',#461841); +#461841 = CARTESIAN_POINT('',(151.787191,-141.714079,-7.5E-02)); +#461842 = LINE('',#461843,#461844); +#461843 = CARTESIAN_POINT('',(151.74805,-141.797377,-7.5E-02)); +#461844 = VECTOR('',#461845,1.); +#461845 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#461846 = ORIENTED_EDGE('',*,*,#461847,.T.); +#461847 = EDGE_CURVE('',#461840,#461707,#461848,.T.); +#461848 = LINE('',#461849,#461850); +#461849 = CARTESIAN_POINT('',(151.787191,-141.714079,-7.5E-02)); +#461850 = VECTOR('',#461851,1.); +#461851 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#461852 = PLANE('',#461853); +#461853 = AXIS2_PLACEMENT_3D('',#461854,#461855,#461856); +#461854 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#461855 = DIRECTION('',(-0.,-0.,-1.)); +#461856 = DIRECTION('',(-1.,0.,0.)); +#461857 = SHELL_BASED_SURFACE_MODEL('',(#461858)); +#461858 = OPEN_SHELL('',(#461859)); +#461859 = ADVANCED_FACE('',(#461860,#461977),#462045,.T.); +#461860 = FACE_BOUND('',#461861,.T.); +#461861 = EDGE_LOOP('',(#461862,#461873,#461881,#461890,#461898,#461906, + #461914,#461922,#461930,#461939,#461947,#461955,#461963,#461971)); +#461862 = ORIENTED_EDGE('',*,*,#461863,.T.); +#461863 = EDGE_CURVE('',#461864,#461866,#461868,.T.); +#461864 = VERTEX_POINT('',#461865); +#461865 = CARTESIAN_POINT('',(153.359558,-141.303971,-7.5E-02)); +#461866 = VERTEX_POINT('',#461867); +#461867 = CARTESIAN_POINT('',(153.405752,-141.234837,-7.5E-02)); +#461868 = CIRCLE('',#461869,5.000000000001E-02); +#461869 = AXIS2_PLACEMENT_3D('',#461870,#461871,#461872); +#461870 = CARTESIAN_POINT('',(153.40575204771,-141.284837,-7.5E-02)); +#461871 = DIRECTION('',(0.,0.,-1.)); +#461872 = DIRECTION('',(-0.923880954236,-0.38268,-0.)); +#461873 = ORIENTED_EDGE('',*,*,#461874,.T.); +#461874 = EDGE_CURVE('',#461866,#461875,#461877,.T.); +#461875 = VERTEX_POINT('',#461876); +#461876 = CARTESIAN_POINT('',(154.405752,-141.234837,-7.5E-02)); +#461877 = LINE('',#461878,#461879); +#461878 = CARTESIAN_POINT('',(153.405752,-141.234837,-7.5E-02)); +#461879 = VECTOR('',#461880,1.); +#461880 = DIRECTION('',(1.,0.,0.)); +#461881 = ORIENTED_EDGE('',*,*,#461882,.T.); +#461882 = EDGE_CURVE('',#461875,#461883,#461885,.T.); +#461883 = VERTEX_POINT('',#461884); +#461884 = CARTESIAN_POINT('',(154.405752,-141.334837,-7.5E-02)); +#461885 = CIRCLE('',#461886,5.000000000002E-02); +#461886 = AXIS2_PLACEMENT_3D('',#461887,#461888,#461889); +#461887 = CARTESIAN_POINT('',(154.40575195228,-141.284837,-7.5E-02)); +#461888 = DIRECTION('',(0.,0.,-1.)); +#461889 = DIRECTION('',(9.542367251918E-07,1.,0.)); +#461890 = ORIENTED_EDGE('',*,*,#461891,.T.); +#461891 = EDGE_CURVE('',#461883,#461892,#461894,.T.); +#461892 = VERTEX_POINT('',#461893); +#461893 = CARTESIAN_POINT('',(154.105702,-141.334837,-7.5E-02)); +#461894 = LINE('',#461895,#461896); +#461895 = CARTESIAN_POINT('',(154.405752,-141.334837,-7.5E-02)); +#461896 = VECTOR('',#461897,1.); +#461897 = DIRECTION('',(-1.,0.,0.)); +#461898 = ORIENTED_EDGE('',*,*,#461899,.T.); +#461899 = EDGE_CURVE('',#461892,#461900,#461902,.T.); +#461900 = VERTEX_POINT('',#461901); +#461901 = CARTESIAN_POINT('',(154.12193,-141.377618,-7.5E-02)); +#461902 = LINE('',#461903,#461904); +#461903 = CARTESIAN_POINT('',(154.105702,-141.334837,-7.5E-02)); +#461904 = VECTOR('',#461905,1.); +#461905 = DIRECTION('',(0.354668069723,-0.934992278213,0.)); +#461906 = ORIENTED_EDGE('',*,*,#461907,.T.); +#461907 = EDGE_CURVE('',#461900,#461908,#461910,.T.); +#461908 = VERTEX_POINT('',#461909); +#461909 = CARTESIAN_POINT('',(154.120176,-141.581823,-7.5E-02)); +#461910 = LINE('',#461911,#461912); +#461911 = CARTESIAN_POINT('',(154.12193,-141.377618,-7.5E-02)); +#461912 = VECTOR('',#461913,1.); +#461913 = DIRECTION('',(-8.589090866264E-03,-0.999963113079,0.)); +#461914 = ORIENTED_EDGE('',*,*,#461915,.T.); +#461915 = EDGE_CURVE('',#461908,#461916,#461918,.T.); +#461916 = VERTEX_POINT('',#461917); +#461917 = CARTESIAN_POINT('',(154.060155,-141.701145,-7.5E-02)); +#461918 = LINE('',#461919,#461920); +#461919 = CARTESIAN_POINT('',(154.120176,-141.581823,-7.5E-02)); +#461920 = VECTOR('',#461921,1.); +#461921 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#461922 = ORIENTED_EDGE('',*,*,#461923,.T.); +#461923 = EDGE_CURVE('',#461916,#461924,#461926,.T.); +#461924 = VERTEX_POINT('',#461925); +#461925 = CARTESIAN_POINT('',(153.99954,-141.75813,-7.5E-02)); +#461926 = LINE('',#461927,#461928); +#461927 = CARTESIAN_POINT('',(154.060155,-141.701145,-7.5E-02)); +#461928 = VECTOR('',#461929,1.); +#461929 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#461930 = ORIENTED_EDGE('',*,*,#461931,.T.); +#461931 = EDGE_CURVE('',#461924,#461932,#461934,.T.); +#461932 = VERTEX_POINT('',#461933); +#461933 = CARTESIAN_POINT('',(153.465634,-141.748763,-7.5E-02)); +#461934 = CIRCLE('',#461935,0.484201554455); +#461935 = AXIS2_PLACEMENT_3D('',#461936,#461937,#461938); +#461936 = CARTESIAN_POINT('',(153.73967270064,-141.349571397,-7.5E-02)); +#461937 = DIRECTION('',(-0.,0.,-1.)); +#461938 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#461939 = ORIENTED_EDGE('',*,*,#461940,.T.); +#461940 = EDGE_CURVE('',#461932,#461941,#461943,.T.); +#461941 = VERTEX_POINT('',#461942); +#461942 = CARTESIAN_POINT('',(153.408649,-141.688149,-7.5E-02)); +#461943 = LINE('',#461944,#461945); +#461944 = CARTESIAN_POINT('',(153.465634,-141.748763,-7.5E-02)); +#461945 = VECTOR('',#461946,1.); +#461946 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#461947 = ORIENTED_EDGE('',*,*,#461948,.T.); +#461948 = EDGE_CURVE('',#461941,#461949,#461951,.T.); +#461949 = VERTEX_POINT('',#461950); +#461950 = CARTESIAN_POINT('',(153.357994,-141.581823,-7.5E-02)); +#461951 = LINE('',#461952,#461953); +#461952 = CARTESIAN_POINT('',(153.408649,-141.688149,-7.5E-02)); +#461953 = VECTOR('',#461954,1.); +#461954 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#461955 = ORIENTED_EDGE('',*,*,#461956,.T.); +#461956 = EDGE_CURVE('',#461949,#461957,#461959,.T.); +#461957 = VERTEX_POINT('',#461958); +#461958 = CARTESIAN_POINT('',(153.357994,-141.368802,-7.5E-02)); +#461959 = LINE('',#461960,#461961); +#461960 = CARTESIAN_POINT('',(153.357994,-141.581823,-7.5E-02)); +#461961 = VECTOR('',#461962,1.); +#461962 = DIRECTION('',(0.,1.,0.)); +#461963 = ORIENTED_EDGE('',*,*,#461964,.T.); +#461964 = EDGE_CURVE('',#461957,#461965,#461967,.T.); +#461965 = VERTEX_POINT('',#461966); +#461966 = CARTESIAN_POINT('',(153.378454,-141.322867,-7.5E-02)); +#461967 = LINE('',#461968,#461969); +#461968 = CARTESIAN_POINT('',(153.357994,-141.368802,-7.5E-02)); +#461969 = VECTOR('',#461970,1.); +#461970 = DIRECTION('',(0.406876386712,0.913483226959,0.)); +#461971 = ORIENTED_EDGE('',*,*,#461972,.T.); +#461972 = EDGE_CURVE('',#461965,#461864,#461973,.T.); +#461973 = LINE('',#461974,#461975); +#461974 = CARTESIAN_POINT('',(153.378454,-141.322867,-7.5E-02)); +#461975 = VECTOR('',#461976,1.); +#461976 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#461977 = FACE_BOUND('',#461978,.T.); +#461978 = EDGE_LOOP('',(#461979,#461989,#461997,#462005,#462013,#462022, + #462030,#462039)); +#461979 = ORIENTED_EDGE('',*,*,#461980,.T.); +#461980 = EDGE_CURVE('',#461981,#461983,#461985,.T.); +#461981 = VERTEX_POINT('',#461982); +#461982 = CARTESIAN_POINT('',(154.022419,-141.391878,-7.5E-02)); +#461983 = VERTEX_POINT('',#461984); +#461984 = CARTESIAN_POINT('',(153.993898,-141.334837,-7.5E-02)); +#461985 = LINE('',#461986,#461987); +#461986 = CARTESIAN_POINT('',(154.022419,-141.391878,-7.5E-02)); +#461987 = VECTOR('',#461988,1.); +#461988 = DIRECTION('',(-0.447219867638,0.894424054904,0.)); +#461989 = ORIENTED_EDGE('',*,*,#461990,.T.); +#461990 = EDGE_CURVE('',#461983,#461991,#461993,.T.); +#461991 = VERTEX_POINT('',#461992); +#461992 = CARTESIAN_POINT('',(153.484273,-141.334837,-7.5E-02)); +#461993 = LINE('',#461994,#461995); +#461994 = CARTESIAN_POINT('',(153.993898,-141.334837,-7.5E-02)); +#461995 = VECTOR('',#461996,1.); +#461996 = DIRECTION('',(-1.,0.,0.)); +#461997 = ORIENTED_EDGE('',*,*,#461998,.T.); +#461998 = EDGE_CURVE('',#461991,#461999,#462001,.T.); +#461999 = VERTEX_POINT('',#462000); +#462000 = CARTESIAN_POINT('',(153.455752,-141.391878,-7.5E-02)); +#462001 = LINE('',#462002,#462003); +#462002 = CARTESIAN_POINT('',(153.484273,-141.334837,-7.5E-02)); +#462003 = VECTOR('',#462004,1.); +#462004 = DIRECTION('',(-0.447219867638,-0.894424054904,0.)); +#462005 = ORIENTED_EDGE('',*,*,#462006,.T.); +#462006 = EDGE_CURVE('',#461999,#462007,#462009,.T.); +#462007 = VERTEX_POINT('',#462008); +#462008 = CARTESIAN_POINT('',(153.455752,-141.558748,-7.5E-02)); +#462009 = LINE('',#462010,#462011); +#462010 = CARTESIAN_POINT('',(153.455752,-141.391878,-7.5E-02)); +#462011 = VECTOR('',#462012,1.); +#462012 = DIRECTION('',(0.,-1.,0.)); +#462013 = ORIENTED_EDGE('',*,*,#462014,.T.); +#462014 = EDGE_CURVE('',#462007,#462015,#462017,.T.); +#462015 = VERTEX_POINT('',#462016); +#462016 = CARTESIAN_POINT('',(153.608032,-141.711027,-7.5E-02)); +#462017 = CIRCLE('',#462018,0.215060459698); +#462018 = AXIS2_PLACEMENT_3D('',#462019,#462020,#462021); +#462019 = CARTESIAN_POINT('',(153.66352833746,-141.503250298,-7.5E-02)); +#462020 = DIRECTION('',(0.,0.,1.)); +#462021 = DIRECTION('',(-0.966129886234,-0.2580562786,0.)); +#462022 = ORIENTED_EDGE('',*,*,#462023,.T.); +#462023 = EDGE_CURVE('',#462015,#462024,#462026,.T.); +#462024 = VERTEX_POINT('',#462025); +#462025 = CARTESIAN_POINT('',(153.870139,-141.711027,-7.5E-02)); +#462026 = LINE('',#462027,#462028); +#462027 = CARTESIAN_POINT('',(153.608032,-141.711027,-7.5E-02)); +#462028 = VECTOR('',#462029,1.); +#462029 = DIRECTION('',(1.,0.,0.)); +#462030 = ORIENTED_EDGE('',*,*,#462031,.T.); +#462031 = EDGE_CURVE('',#462024,#462032,#462034,.T.); +#462032 = VERTEX_POINT('',#462033); +#462033 = CARTESIAN_POINT('',(154.022419,-141.558747,-7.5E-02)); +#462034 = CIRCLE('',#462035,0.215072998571); +#462035 = AXIS2_PLACEMENT_3D('',#462036,#462037,#462038); +#462036 = CARTESIAN_POINT('',(153.81463213236,-141.5032401323,-7.5E-02) + ); +#462037 = DIRECTION('',(0.,0.,1.)); +#462038 = DIRECTION('',(0.2580838506,-0.966122521247,0.)); +#462039 = ORIENTED_EDGE('',*,*,#462040,.T.); +#462040 = EDGE_CURVE('',#462032,#461981,#462041,.T.); +#462041 = LINE('',#462042,#462043); +#462042 = CARTESIAN_POINT('',(154.022419,-141.558747,-7.5E-02)); +#462043 = VECTOR('',#462044,1.); +#462044 = DIRECTION('',(0.,1.,0.)); +#462045 = PLANE('',#462046); +#462046 = AXIS2_PLACEMENT_3D('',#462047,#462048,#462049); +#462047 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#462048 = DIRECTION('',(-0.,-0.,-1.)); +#462049 = DIRECTION('',(-1.,0.,0.)); +#462050 = SHELL_BASED_SURFACE_MODEL('',(#462051)); +#462051 = OPEN_SHELL('',(#462052)); +#462052 = ADVANCED_FACE('',(#462053),#462095,.T.); +#462053 = FACE_BOUND('',#462054,.T.); +#462054 = EDGE_LOOP('',(#462055,#462065,#462073,#462081,#462089)); +#462055 = ORIENTED_EDGE('',*,*,#462056,.T.); +#462056 = EDGE_CURVE('',#462057,#462059,#462061,.T.); +#462057 = VERTEX_POINT('',#462058); +#462058 = CARTESIAN_POINT('',(132.315501,-141.613043,-7.5E-02)); +#462059 = VERTEX_POINT('',#462060); +#462060 = CARTESIAN_POINT('',(132.315501,-141.324953,-7.5E-02)); +#462061 = LINE('',#462062,#462063); +#462062 = CARTESIAN_POINT('',(132.315501,-141.613043,-7.5E-02)); +#462063 = VECTOR('',#462064,1.); +#462064 = DIRECTION('',(0.,1.,0.)); +#462065 = ORIENTED_EDGE('',*,*,#462066,.T.); +#462066 = EDGE_CURVE('',#462059,#462067,#462069,.T.); +#462067 = VERTEX_POINT('',#462068); +#462068 = CARTESIAN_POINT('',(132.603592,-141.324953,-7.5E-02)); +#462069 = LINE('',#462070,#462071); +#462070 = CARTESIAN_POINT('',(132.315501,-141.324953,-7.5E-02)); +#462071 = VECTOR('',#462072,1.); +#462072 = DIRECTION('',(1.,0.,0.)); +#462073 = ORIENTED_EDGE('',*,*,#462074,.T.); +#462074 = EDGE_CURVE('',#462067,#462075,#462077,.T.); +#462075 = VERTEX_POINT('',#462076); +#462076 = CARTESIAN_POINT('',(132.603592,-141.468998,-7.5E-02)); +#462077 = LINE('',#462078,#462079); +#462078 = CARTESIAN_POINT('',(132.603592,-141.324953,-7.5E-02)); +#462079 = VECTOR('',#462080,1.); +#462080 = DIRECTION('',(0.,-1.,0.)); +#462081 = ORIENTED_EDGE('',*,*,#462082,.T.); +#462082 = EDGE_CURVE('',#462075,#462083,#462085,.T.); +#462083 = VERTEX_POINT('',#462084); +#462084 = CARTESIAN_POINT('',(132.603592,-141.613043,-7.5E-02)); +#462085 = LINE('',#462086,#462087); +#462086 = CARTESIAN_POINT('',(132.603592,-141.468998,-7.5E-02)); +#462087 = VECTOR('',#462088,1.); +#462088 = DIRECTION('',(0.,-1.,0.)); +#462089 = ORIENTED_EDGE('',*,*,#462090,.T.); +#462090 = EDGE_CURVE('',#462083,#462057,#462091,.T.); +#462091 = LINE('',#462092,#462093); +#462092 = CARTESIAN_POINT('',(132.603592,-141.613043,-7.5E-02)); +#462093 = VECTOR('',#462094,1.); +#462094 = DIRECTION('',(-1.,0.,0.)); +#462095 = PLANE('',#462096); +#462096 = AXIS2_PLACEMENT_3D('',#462097,#462098,#462099); +#462097 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#462098 = DIRECTION('',(-0.,-0.,-1.)); +#462099 = DIRECTION('',(-1.,0.,0.)); +#462100 = SHELL_BASED_SURFACE_MODEL('',(#462101)); +#462101 = OPEN_SHELL('',(#462102)); +#462102 = ADVANCED_FACE('',(#462103,#462279),#462313,.T.); +#462103 = FACE_BOUND('',#462104,.T.); +#462104 = EDGE_LOOP('',(#462105,#462115,#462123,#462131,#462139,#462147, + #462155,#462163,#462171,#462179,#462187,#462195,#462203,#462211, + #462217,#462225,#462233,#462241,#462249,#462257,#462265,#462273)); +#462105 = ORIENTED_EDGE('',*,*,#462106,.T.); +#462106 = EDGE_CURVE('',#462107,#462109,#462111,.T.); +#462107 = VERTEX_POINT('',#462108); +#462108 = CARTESIAN_POINT('',(135.484499,-141.036862,-7.5E-02)); +#462109 = VERTEX_POINT('',#462110); +#462110 = CARTESIAN_POINT('',(135.484499,-139.884499,-7.5E-02)); +#462111 = LINE('',#462112,#462113); +#462112 = CARTESIAN_POINT('',(135.484499,-141.036862,-7.5E-02)); +#462113 = VECTOR('',#462114,1.); +#462114 = DIRECTION('',(0.,1.,0.)); +#462115 = ORIENTED_EDGE('',*,*,#462116,.T.); +#462116 = EDGE_CURVE('',#462109,#462117,#462119,.T.); +#462117 = VERTEX_POINT('',#462118); +#462118 = CARTESIAN_POINT('',(135.77259,-139.884499,-7.5E-02)); +#462119 = LINE('',#462120,#462121); +#462120 = CARTESIAN_POINT('',(135.484499,-139.884499,-7.5E-02)); +#462121 = VECTOR('',#462122,1.); +#462122 = DIRECTION('',(1.,0.,0.)); +#462123 = ORIENTED_EDGE('',*,*,#462124,.T.); +#462124 = EDGE_CURVE('',#462117,#462125,#462127,.T.); +#462125 = VERTEX_POINT('',#462126); +#462126 = CARTESIAN_POINT('',(135.77259,-140.46068,-7.5E-02)); +#462127 = LINE('',#462128,#462129); +#462128 = CARTESIAN_POINT('',(135.77259,-139.884499,-7.5E-02)); +#462129 = VECTOR('',#462130,1.); +#462130 = DIRECTION('',(0.,-1.,0.)); +#462131 = ORIENTED_EDGE('',*,*,#462132,.T.); +#462132 = EDGE_CURVE('',#462125,#462133,#462135,.T.); +#462133 = VERTEX_POINT('',#462134); +#462134 = CARTESIAN_POINT('',(136.060681,-140.46068,-7.5E-02)); +#462135 = LINE('',#462136,#462137); +#462136 = CARTESIAN_POINT('',(135.77259,-140.46068,-7.5E-02)); +#462137 = VECTOR('',#462138,1.); +#462138 = DIRECTION('',(1.,0.,0.)); +#462139 = ORIENTED_EDGE('',*,*,#462140,.T.); +#462140 = EDGE_CURVE('',#462133,#462141,#462143,.T.); +#462141 = VERTEX_POINT('',#462142); +#462142 = CARTESIAN_POINT('',(136.060681,-139.884499,-7.5E-02)); +#462143 = LINE('',#462144,#462145); +#462144 = CARTESIAN_POINT('',(136.060681,-140.46068,-7.5E-02)); +#462145 = VECTOR('',#462146,1.); +#462146 = DIRECTION('',(0.,1.,0.)); +#462147 = ORIENTED_EDGE('',*,*,#462148,.T.); +#462148 = EDGE_CURVE('',#462141,#462149,#462151,.T.); +#462149 = VERTEX_POINT('',#462150); +#462150 = CARTESIAN_POINT('',(136.348771,-139.884499,-7.5E-02)); +#462151 = LINE('',#462152,#462153); +#462152 = CARTESIAN_POINT('',(136.060681,-139.884499,-7.5E-02)); +#462153 = VECTOR('',#462154,1.); +#462154 = DIRECTION('',(1.,0.,0.)); +#462155 = ORIENTED_EDGE('',*,*,#462156,.T.); +#462156 = EDGE_CURVE('',#462149,#462157,#462159,.T.); +#462157 = VERTEX_POINT('',#462158); +#462158 = CARTESIAN_POINT('',(136.348771,-140.17259,-7.5E-02)); +#462159 = LINE('',#462160,#462161); +#462160 = CARTESIAN_POINT('',(136.348771,-139.884499,-7.5E-02)); +#462161 = VECTOR('',#462162,1.); +#462162 = DIRECTION('',(0.,-1.,0.)); +#462163 = ORIENTED_EDGE('',*,*,#462164,.T.); +#462164 = EDGE_CURVE('',#462157,#462165,#462167,.T.); +#462165 = VERTEX_POINT('',#462166); +#462166 = CARTESIAN_POINT('',(136.636862,-140.17259,-7.5E-02)); +#462167 = LINE('',#462168,#462169); +#462168 = CARTESIAN_POINT('',(136.348771,-140.17259,-7.5E-02)); +#462169 = VECTOR('',#462170,1.); +#462170 = DIRECTION('',(1.,0.,0.)); +#462171 = ORIENTED_EDGE('',*,*,#462172,.T.); +#462172 = EDGE_CURVE('',#462165,#462173,#462175,.T.); +#462173 = VERTEX_POINT('',#462174); +#462174 = CARTESIAN_POINT('',(136.636862,-140.46068,-7.5E-02)); +#462175 = LINE('',#462176,#462177); +#462176 = CARTESIAN_POINT('',(136.636862,-140.17259,-7.5E-02)); +#462177 = VECTOR('',#462178,1.); +#462178 = DIRECTION('',(0.,-1.,0.)); +#462179 = ORIENTED_EDGE('',*,*,#462180,.T.); +#462180 = EDGE_CURVE('',#462173,#462181,#462183,.T.); +#462181 = VERTEX_POINT('',#462182); +#462182 = CARTESIAN_POINT('',(136.924953,-140.46068,-7.5E-02)); +#462183 = LINE('',#462184,#462185); +#462184 = CARTESIAN_POINT('',(136.636862,-140.46068,-7.5E-02)); +#462185 = VECTOR('',#462186,1.); +#462186 = DIRECTION('',(1.,0.,0.)); +#462187 = ORIENTED_EDGE('',*,*,#462188,.T.); +#462188 = EDGE_CURVE('',#462181,#462189,#462191,.T.); +#462189 = VERTEX_POINT('',#462190); +#462190 = CARTESIAN_POINT('',(136.924953,-140.17259,-7.5E-02)); +#462191 = LINE('',#462192,#462193); +#462192 = CARTESIAN_POINT('',(136.924953,-140.46068,-7.5E-02)); +#462193 = VECTOR('',#462194,1.); +#462194 = DIRECTION('',(0.,1.,0.)); +#462195 = ORIENTED_EDGE('',*,*,#462196,.T.); +#462196 = EDGE_CURVE('',#462189,#462197,#462199,.T.); +#462197 = VERTEX_POINT('',#462198); +#462198 = CARTESIAN_POINT('',(137.213044,-140.17259,-7.5E-02)); +#462199 = LINE('',#462200,#462201); +#462200 = CARTESIAN_POINT('',(136.924953,-140.17259,-7.5E-02)); +#462201 = VECTOR('',#462202,1.); +#462202 = DIRECTION('',(1.,0.,0.)); +#462203 = ORIENTED_EDGE('',*,*,#462204,.T.); +#462204 = EDGE_CURVE('',#462197,#462205,#462207,.T.); +#462205 = VERTEX_POINT('',#462206); +#462206 = CARTESIAN_POINT('',(137.213044,-140.46068,-7.5E-02)); +#462207 = LINE('',#462208,#462209); +#462208 = CARTESIAN_POINT('',(137.213044,-140.17259,-7.5E-02)); +#462209 = VECTOR('',#462210,1.); +#462210 = DIRECTION('',(0.,-1.,0.)); +#462211 = ORIENTED_EDGE('',*,*,#462212,.T.); +#462212 = EDGE_CURVE('',#462205,#462181,#462213,.T.); +#462213 = LINE('',#462214,#462215); +#462214 = CARTESIAN_POINT('',(137.213044,-140.46068,-7.5E-02)); +#462215 = VECTOR('',#462216,1.); +#462216 = DIRECTION('',(-1.,0.,0.)); +#462217 = ORIENTED_EDGE('',*,*,#462218,.T.); +#462218 = EDGE_CURVE('',#462181,#462219,#462221,.T.); +#462219 = VERTEX_POINT('',#462220); +#462220 = CARTESIAN_POINT('',(136.924953,-140.748771,-7.5E-02)); +#462221 = LINE('',#462222,#462223); +#462222 = CARTESIAN_POINT('',(136.924953,-140.46068,-7.5E-02)); +#462223 = VECTOR('',#462224,1.); +#462224 = DIRECTION('',(0.,-1.,0.)); +#462225 = ORIENTED_EDGE('',*,*,#462226,.T.); +#462226 = EDGE_CURVE('',#462219,#462227,#462229,.T.); +#462227 = VERTEX_POINT('',#462228); +#462228 = CARTESIAN_POINT('',(136.636862,-140.748771,-7.5E-02)); +#462229 = LINE('',#462230,#462231); +#462230 = CARTESIAN_POINT('',(136.924953,-140.748771,-7.5E-02)); +#462231 = VECTOR('',#462232,1.); +#462232 = DIRECTION('',(-1.,0.,0.)); +#462233 = ORIENTED_EDGE('',*,*,#462234,.T.); +#462234 = EDGE_CURVE('',#462227,#462235,#462237,.T.); +#462235 = VERTEX_POINT('',#462236); +#462236 = CARTESIAN_POINT('',(136.636862,-141.036862,-7.5E-02)); +#462237 = LINE('',#462238,#462239); +#462238 = CARTESIAN_POINT('',(136.636862,-140.748771,-7.5E-02)); +#462239 = VECTOR('',#462240,1.); +#462240 = DIRECTION('',(0.,-1.,0.)); +#462241 = ORIENTED_EDGE('',*,*,#462242,.T.); +#462242 = EDGE_CURVE('',#462235,#462243,#462245,.T.); +#462243 = VERTEX_POINT('',#462244); +#462244 = CARTESIAN_POINT('',(136.348771,-141.036862,-7.5E-02)); +#462245 = LINE('',#462246,#462247); +#462246 = CARTESIAN_POINT('',(136.636862,-141.036862,-7.5E-02)); +#462247 = VECTOR('',#462248,1.); +#462248 = DIRECTION('',(-1.,0.,0.)); +#462249 = ORIENTED_EDGE('',*,*,#462250,.T.); +#462250 = EDGE_CURVE('',#462243,#462251,#462253,.T.); +#462251 = VERTEX_POINT('',#462252); +#462252 = CARTESIAN_POINT('',(136.348771,-141.324953,-7.5E-02)); +#462253 = LINE('',#462254,#462255); +#462254 = CARTESIAN_POINT('',(136.348771,-141.036862,-7.5E-02)); +#462255 = VECTOR('',#462256,1.); +#462256 = DIRECTION('',(0.,-1.,0.)); +#462257 = ORIENTED_EDGE('',*,*,#462258,.T.); +#462258 = EDGE_CURVE('',#462251,#462259,#462261,.T.); +#462259 = VERTEX_POINT('',#462260); +#462260 = CARTESIAN_POINT('',(136.060681,-141.324953,-7.5E-02)); +#462261 = LINE('',#462262,#462263); +#462262 = CARTESIAN_POINT('',(136.348771,-141.324953,-7.5E-02)); +#462263 = VECTOR('',#462264,1.); +#462264 = DIRECTION('',(-1.,0.,0.)); +#462265 = ORIENTED_EDGE('',*,*,#462266,.T.); +#462266 = EDGE_CURVE('',#462259,#462267,#462269,.T.); +#462267 = VERTEX_POINT('',#462268); +#462268 = CARTESIAN_POINT('',(136.060681,-141.036862,-7.5E-02)); +#462269 = LINE('',#462270,#462271); +#462270 = CARTESIAN_POINT('',(136.060681,-141.324953,-7.5E-02)); +#462271 = VECTOR('',#462272,1.); +#462272 = DIRECTION('',(0.,1.,0.)); +#462273 = ORIENTED_EDGE('',*,*,#462274,.T.); +#462274 = EDGE_CURVE('',#462267,#462107,#462275,.T.); +#462275 = LINE('',#462276,#462277); +#462276 = CARTESIAN_POINT('',(136.060681,-141.036862,-7.5E-02)); +#462277 = VECTOR('',#462278,1.); +#462278 = DIRECTION('',(-1.,0.,0.)); +#462279 = FACE_BOUND('',#462280,.T.); +#462280 = EDGE_LOOP('',(#462281,#462291,#462299,#462307)); +#462281 = ORIENTED_EDGE('',*,*,#462282,.T.); +#462282 = EDGE_CURVE('',#462283,#462285,#462287,.T.); +#462283 = VERTEX_POINT('',#462284); +#462284 = CARTESIAN_POINT('',(136.636862,-140.748771,-7.5E-02)); +#462285 = VERTEX_POINT('',#462286); +#462286 = CARTESIAN_POINT('',(136.636862,-140.46068,-7.5E-02)); +#462287 = LINE('',#462288,#462289); +#462288 = CARTESIAN_POINT('',(136.636862,-140.748771,-7.5E-02)); +#462289 = VECTOR('',#462290,1.); +#462290 = DIRECTION('',(0.,1.,0.)); +#462291 = ORIENTED_EDGE('',*,*,#462292,.T.); +#462292 = EDGE_CURVE('',#462285,#462293,#462295,.T.); +#462293 = VERTEX_POINT('',#462294); +#462294 = CARTESIAN_POINT('',(136.348771,-140.46068,-7.5E-02)); +#462295 = LINE('',#462296,#462297); +#462296 = CARTESIAN_POINT('',(136.636862,-140.46068,-7.5E-02)); +#462297 = VECTOR('',#462298,1.); +#462298 = DIRECTION('',(-1.,0.,0.)); +#462299 = ORIENTED_EDGE('',*,*,#462300,.T.); +#462300 = EDGE_CURVE('',#462293,#462301,#462303,.T.); +#462301 = VERTEX_POINT('',#462302); +#462302 = CARTESIAN_POINT('',(136.348771,-140.748771,-7.5E-02)); +#462303 = LINE('',#462304,#462305); +#462304 = CARTESIAN_POINT('',(136.348771,-140.46068,-7.5E-02)); +#462305 = VECTOR('',#462306,1.); +#462306 = DIRECTION('',(0.,-1.,0.)); +#462307 = ORIENTED_EDGE('',*,*,#462308,.T.); +#462308 = EDGE_CURVE('',#462301,#462283,#462309,.T.); +#462309 = LINE('',#462310,#462311); +#462310 = CARTESIAN_POINT('',(136.348771,-140.748771,-7.5E-02)); +#462311 = VECTOR('',#462312,1.); +#462312 = DIRECTION('',(1.,0.,0.)); +#462313 = PLANE('',#462314); +#462314 = AXIS2_PLACEMENT_3D('',#462315,#462316,#462317); +#462315 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#462316 = DIRECTION('',(-0.,-0.,-1.)); +#462317 = DIRECTION('',(-1.,0.,0.)); +#462318 = SHELL_BASED_SURFACE_MODEL('',(#462319)); +#462319 = OPEN_SHELL('',(#462320)); +#462320 = ADVANCED_FACE('',(#462321,#463687,#463721,#463755,#463789, + #463823,#463857,#463891,#463925,#463959),#463993,.T.); +#462321 = FACE_BOUND('',#462322,.T.); +#462322 = EDGE_LOOP('',(#462323,#462333,#462341,#462349,#462357,#462365, + #462373,#462381,#462389,#462397,#462405,#462413,#462421,#462429, + #462435,#462443,#462451,#462459,#462467,#462475,#462483,#462491, + #462499,#462507,#462515,#462523,#462531,#462537,#462545,#462553, + #462561,#462569,#462577,#462585,#462593,#462601,#462609,#462617, + #462625,#462633,#462641,#462649,#462657,#462663,#462671,#462679, + #462687,#462695,#462703,#462711,#462717,#462725,#462733,#462739, + #462747,#462755,#462763,#462771,#462779,#462787,#462795,#462803, + #462811,#462817,#462825,#462833,#462839,#462847,#462855,#462863, + #462871,#462879,#462887,#462895,#462903,#462911,#462919,#462925, + #462933,#462941,#462949,#462957,#462965,#462973,#462981,#462989, + #462997,#463005,#463013,#463021,#463029,#463037,#463045,#463053, + #463061,#463069,#463077,#463085,#463093,#463101,#463109,#463117, + #463125,#463133,#463141,#463149,#463157,#463165,#463173,#463181, + #463189,#463197,#463205,#463213,#463219,#463227,#463235,#463243, + #463251,#463259,#463267,#463273,#463281,#463287,#463295,#463303, + #463311,#463319,#463327,#463335,#463343,#463351,#463359,#463367, + #463375,#463383,#463391,#463399,#463407,#463415,#463423,#463431, + #463439,#463445,#463451,#463459,#463467,#463475,#463483,#463491, + #463499,#463507,#463515,#463523,#463531,#463539,#463547,#463553, + #463561,#463569,#463577,#463585,#463593,#463601,#463609,#463617, + #463625,#463633,#463641,#463649,#463657,#463665,#463673,#463681)); +#462323 = ORIENTED_EDGE('',*,*,#462324,.T.); +#462324 = EDGE_CURVE('',#462325,#462327,#462329,.T.); +#462325 = VERTEX_POINT('',#462326); +#462326 = CARTESIAN_POINT('',(136.348771,-133.546503,-7.5E-02)); +#462327 = VERTEX_POINT('',#462328); +#462328 = CARTESIAN_POINT('',(136.348771,-133.258412,-7.5E-02)); +#462329 = LINE('',#462330,#462331); +#462330 = CARTESIAN_POINT('',(136.348771,-133.546503,-7.5E-02)); +#462331 = VECTOR('',#462332,1.); +#462332 = DIRECTION('',(0.,1.,0.)); +#462333 = ORIENTED_EDGE('',*,*,#462334,.T.); +#462334 = EDGE_CURVE('',#462327,#462335,#462337,.T.); +#462335 = VERTEX_POINT('',#462336); +#462336 = CARTESIAN_POINT('',(136.924953,-133.258412,-7.5E-02)); +#462337 = LINE('',#462338,#462339); +#462338 = CARTESIAN_POINT('',(136.348771,-133.258412,-7.5E-02)); +#462339 = VECTOR('',#462340,1.); +#462340 = DIRECTION('',(1.,0.,0.)); +#462341 = ORIENTED_EDGE('',*,*,#462342,.T.); +#462342 = EDGE_CURVE('',#462335,#462343,#462345,.T.); +#462343 = VERTEX_POINT('',#462344); +#462344 = CARTESIAN_POINT('',(136.924953,-135.275047,-7.5E-02)); +#462345 = LINE('',#462346,#462347); +#462346 = CARTESIAN_POINT('',(136.924953,-133.258412,-7.5E-02)); +#462347 = VECTOR('',#462348,1.); +#462348 = DIRECTION('',(0.,-1.,0.)); +#462349 = ORIENTED_EDGE('',*,*,#462350,.T.); +#462350 = EDGE_CURVE('',#462343,#462351,#462353,.T.); +#462351 = VERTEX_POINT('',#462352); +#462352 = CARTESIAN_POINT('',(136.636862,-135.275047,-7.5E-02)); +#462353 = LINE('',#462354,#462355); +#462354 = CARTESIAN_POINT('',(136.924953,-135.275047,-7.5E-02)); +#462355 = VECTOR('',#462356,1.); +#462356 = DIRECTION('',(-1.,0.,0.)); +#462357 = ORIENTED_EDGE('',*,*,#462358,.T.); +#462358 = EDGE_CURVE('',#462351,#462359,#462361,.T.); +#462359 = VERTEX_POINT('',#462360); +#462360 = CARTESIAN_POINT('',(136.636862,-135.563138,-7.5E-02)); +#462361 = LINE('',#462362,#462363); +#462362 = CARTESIAN_POINT('',(136.636862,-135.275047,-7.5E-02)); +#462363 = VECTOR('',#462364,1.); +#462364 = DIRECTION('',(0.,-1.,0.)); +#462365 = ORIENTED_EDGE('',*,*,#462366,.T.); +#462366 = EDGE_CURVE('',#462359,#462367,#462369,.T.); +#462367 = VERTEX_POINT('',#462368); +#462368 = CARTESIAN_POINT('',(136.348771,-135.563138,-7.5E-02)); +#462369 = LINE('',#462370,#462371); +#462370 = CARTESIAN_POINT('',(136.636862,-135.563138,-7.5E-02)); +#462371 = VECTOR('',#462372,1.); +#462372 = DIRECTION('',(-1.,0.,0.)); +#462373 = ORIENTED_EDGE('',*,*,#462374,.T.); +#462374 = EDGE_CURVE('',#462367,#462375,#462377,.T.); +#462375 = VERTEX_POINT('',#462376); +#462376 = CARTESIAN_POINT('',(136.348771,-135.275047,-7.5E-02)); +#462377 = LINE('',#462378,#462379); +#462378 = CARTESIAN_POINT('',(136.348771,-135.563138,-7.5E-02)); +#462379 = VECTOR('',#462380,1.); +#462380 = DIRECTION('',(0.,1.,0.)); +#462381 = ORIENTED_EDGE('',*,*,#462382,.T.); +#462382 = EDGE_CURVE('',#462375,#462383,#462385,.T.); +#462383 = VERTEX_POINT('',#462384); +#462384 = CARTESIAN_POINT('',(136.060681,-135.275047,-7.5E-02)); +#462385 = LINE('',#462386,#462387); +#462386 = CARTESIAN_POINT('',(136.348771,-135.275047,-7.5E-02)); +#462387 = VECTOR('',#462388,1.); +#462388 = DIRECTION('',(-1.,0.,0.)); +#462389 = ORIENTED_EDGE('',*,*,#462390,.T.); +#462390 = EDGE_CURVE('',#462383,#462391,#462393,.T.); +#462391 = VERTEX_POINT('',#462392); +#462392 = CARTESIAN_POINT('',(136.060681,-136.139319,-7.5E-02)); +#462393 = LINE('',#462394,#462395); +#462394 = CARTESIAN_POINT('',(136.060681,-135.275047,-7.5E-02)); +#462395 = VECTOR('',#462396,1.); +#462396 = DIRECTION('',(0.,-1.,0.)); +#462397 = ORIENTED_EDGE('',*,*,#462398,.T.); +#462398 = EDGE_CURVE('',#462391,#462399,#462401,.T.); +#462399 = VERTEX_POINT('',#462400); +#462400 = CARTESIAN_POINT('',(136.348771,-136.139319,-7.5E-02)); +#462401 = LINE('',#462402,#462403); +#462402 = CARTESIAN_POINT('',(136.060681,-136.139319,-7.5E-02)); +#462403 = VECTOR('',#462404,1.); +#462404 = DIRECTION('',(1.,0.,0.)); +#462405 = ORIENTED_EDGE('',*,*,#462406,.T.); +#462406 = EDGE_CURVE('',#462399,#462407,#462409,.T.); +#462407 = VERTEX_POINT('',#462408); +#462408 = CARTESIAN_POINT('',(136.348771,-135.851229,-7.5E-02)); +#462409 = LINE('',#462410,#462411); +#462410 = CARTESIAN_POINT('',(136.348771,-136.139319,-7.5E-02)); +#462411 = VECTOR('',#462412,1.); +#462412 = DIRECTION('',(0.,1.,0.)); +#462413 = ORIENTED_EDGE('',*,*,#462414,.T.); +#462414 = EDGE_CURVE('',#462407,#462415,#462417,.T.); +#462415 = VERTEX_POINT('',#462416); +#462416 = CARTESIAN_POINT('',(136.636862,-135.851229,-7.5E-02)); +#462417 = LINE('',#462418,#462419); +#462418 = CARTESIAN_POINT('',(136.348771,-135.851229,-7.5E-02)); +#462419 = VECTOR('',#462420,1.); +#462420 = DIRECTION('',(1.,0.,0.)); +#462421 = ORIENTED_EDGE('',*,*,#462422,.T.); +#462422 = EDGE_CURVE('',#462415,#462423,#462425,.T.); +#462423 = VERTEX_POINT('',#462424); +#462424 = CARTESIAN_POINT('',(136.636862,-136.139319,-7.5E-02)); +#462425 = LINE('',#462426,#462427); +#462426 = CARTESIAN_POINT('',(136.636862,-135.851229,-7.5E-02)); +#462427 = VECTOR('',#462428,1.); +#462428 = DIRECTION('',(0.,-1.,0.)); +#462429 = ORIENTED_EDGE('',*,*,#462430,.T.); +#462430 = EDGE_CURVE('',#462423,#462399,#462431,.T.); +#462431 = LINE('',#462432,#462433); +#462432 = CARTESIAN_POINT('',(136.636862,-136.139319,-7.5E-02)); +#462433 = VECTOR('',#462434,1.); +#462434 = DIRECTION('',(-1.,0.,0.)); +#462435 = ORIENTED_EDGE('',*,*,#462436,.T.); +#462436 = EDGE_CURVE('',#462399,#462437,#462439,.T.); +#462437 = VERTEX_POINT('',#462438); +#462438 = CARTESIAN_POINT('',(136.348771,-136.42741,-7.5E-02)); +#462439 = LINE('',#462440,#462441); +#462440 = CARTESIAN_POINT('',(136.348771,-136.139319,-7.5E-02)); +#462441 = VECTOR('',#462442,1.); +#462442 = DIRECTION('',(0.,-1.,0.)); +#462443 = ORIENTED_EDGE('',*,*,#462444,.T.); +#462444 = EDGE_CURVE('',#462437,#462445,#462447,.T.); +#462445 = VERTEX_POINT('',#462446); +#462446 = CARTESIAN_POINT('',(136.636862,-136.42741,-7.5E-02)); +#462447 = LINE('',#462448,#462449); +#462448 = CARTESIAN_POINT('',(136.348771,-136.42741,-7.5E-02)); +#462449 = VECTOR('',#462450,1.); +#462450 = DIRECTION('',(1.,0.,0.)); +#462451 = ORIENTED_EDGE('',*,*,#462452,.T.); +#462452 = EDGE_CURVE('',#462445,#462453,#462455,.T.); +#462453 = VERTEX_POINT('',#462454); +#462454 = CARTESIAN_POINT('',(136.636862,-136.715501,-7.5E-02)); +#462455 = LINE('',#462456,#462457); +#462456 = CARTESIAN_POINT('',(136.636862,-136.42741,-7.5E-02)); +#462457 = VECTOR('',#462458,1.); +#462458 = DIRECTION('',(0.,-1.,0.)); +#462459 = ORIENTED_EDGE('',*,*,#462460,.T.); +#462460 = EDGE_CURVE('',#462453,#462461,#462463,.T.); +#462461 = VERTEX_POINT('',#462462); +#462462 = CARTESIAN_POINT('',(136.348771,-136.715501,-7.5E-02)); +#462463 = LINE('',#462464,#462465); +#462464 = CARTESIAN_POINT('',(136.636862,-136.715501,-7.5E-02)); +#462465 = VECTOR('',#462466,1.); +#462466 = DIRECTION('',(-1.,0.,0.)); +#462467 = ORIENTED_EDGE('',*,*,#462468,.T.); +#462468 = EDGE_CURVE('',#462461,#462469,#462471,.T.); +#462469 = VERTEX_POINT('',#462470); +#462470 = CARTESIAN_POINT('',(136.348771,-137.291682,-7.5E-02)); +#462471 = LINE('',#462472,#462473); +#462472 = CARTESIAN_POINT('',(136.348771,-136.715501,-7.5E-02)); +#462473 = VECTOR('',#462474,1.); +#462474 = DIRECTION('',(0.,-1.,0.)); +#462475 = ORIENTED_EDGE('',*,*,#462476,.T.); +#462476 = EDGE_CURVE('',#462469,#462477,#462479,.T.); +#462477 = VERTEX_POINT('',#462478); +#462478 = CARTESIAN_POINT('',(136.924953,-137.291682,-7.5E-02)); +#462479 = LINE('',#462480,#462481); +#462480 = CARTESIAN_POINT('',(136.348771,-137.291682,-7.5E-02)); +#462481 = VECTOR('',#462482,1.); +#462482 = DIRECTION('',(1.,0.,0.)); +#462483 = ORIENTED_EDGE('',*,*,#462484,.T.); +#462484 = EDGE_CURVE('',#462477,#462485,#462487,.T.); +#462485 = VERTEX_POINT('',#462486); +#462486 = CARTESIAN_POINT('',(136.924953,-137.003592,-7.5E-02)); +#462487 = LINE('',#462488,#462489); +#462488 = CARTESIAN_POINT('',(136.924953,-137.291682,-7.5E-02)); +#462489 = VECTOR('',#462490,1.); +#462490 = DIRECTION('',(0.,1.,0.)); +#462491 = ORIENTED_EDGE('',*,*,#462492,.T.); +#462492 = EDGE_CURVE('',#462485,#462493,#462495,.T.); +#462493 = VERTEX_POINT('',#462494); +#462494 = CARTESIAN_POINT('',(137.501134,-137.003592,-7.5E-02)); +#462495 = LINE('',#462496,#462497); +#462496 = CARTESIAN_POINT('',(136.924953,-137.003592,-7.5E-02)); +#462497 = VECTOR('',#462498,1.); +#462498 = DIRECTION('',(1.,0.,0.)); +#462499 = ORIENTED_EDGE('',*,*,#462500,.T.); +#462500 = EDGE_CURVE('',#462493,#462501,#462503,.T.); +#462501 = VERTEX_POINT('',#462502); +#462502 = CARTESIAN_POINT('',(137.501134,-136.715501,-7.5E-02)); +#462503 = LINE('',#462504,#462505); +#462504 = CARTESIAN_POINT('',(137.501134,-137.003592,-7.5E-02)); +#462505 = VECTOR('',#462506,1.); +#462506 = DIRECTION('',(0.,1.,0.)); +#462507 = ORIENTED_EDGE('',*,*,#462508,.T.); +#462508 = EDGE_CURVE('',#462501,#462509,#462511,.T.); +#462509 = VERTEX_POINT('',#462510); +#462510 = CARTESIAN_POINT('',(137.213044,-136.715501,-7.5E-02)); +#462511 = LINE('',#462512,#462513); +#462512 = CARTESIAN_POINT('',(137.501134,-136.715501,-7.5E-02)); +#462513 = VECTOR('',#462514,1.); +#462514 = DIRECTION('',(-1.,0.,0.)); +#462515 = ORIENTED_EDGE('',*,*,#462516,.T.); +#462516 = EDGE_CURVE('',#462509,#462517,#462519,.T.); +#462517 = VERTEX_POINT('',#462518); +#462518 = CARTESIAN_POINT('',(137.213044,-136.42741,-7.5E-02)); +#462519 = LINE('',#462520,#462521); +#462520 = CARTESIAN_POINT('',(137.213044,-136.715501,-7.5E-02)); +#462521 = VECTOR('',#462522,1.); +#462522 = DIRECTION('',(0.,1.,0.)); +#462523 = ORIENTED_EDGE('',*,*,#462524,.T.); +#462524 = EDGE_CURVE('',#462517,#462525,#462527,.T.); +#462525 = VERTEX_POINT('',#462526); +#462526 = CARTESIAN_POINT('',(137.501134,-136.42741,-7.5E-02)); +#462527 = LINE('',#462528,#462529); +#462528 = CARTESIAN_POINT('',(137.213044,-136.42741,-7.5E-02)); +#462529 = VECTOR('',#462530,1.); +#462530 = DIRECTION('',(1.,0.,0.)); +#462531 = ORIENTED_EDGE('',*,*,#462532,.T.); +#462532 = EDGE_CURVE('',#462525,#462501,#462533,.T.); +#462533 = LINE('',#462534,#462535); +#462534 = CARTESIAN_POINT('',(137.501134,-136.42741,-7.5E-02)); +#462535 = VECTOR('',#462536,1.); +#462536 = DIRECTION('',(0.,-1.,0.)); +#462537 = ORIENTED_EDGE('',*,*,#462538,.T.); +#462538 = EDGE_CURVE('',#462501,#462539,#462541,.T.); +#462539 = VERTEX_POINT('',#462540); +#462540 = CARTESIAN_POINT('',(137.789225,-136.715501,-7.5E-02)); +#462541 = LINE('',#462542,#462543); +#462542 = CARTESIAN_POINT('',(137.501134,-136.715501,-7.5E-02)); +#462543 = VECTOR('',#462544,1.); +#462544 = DIRECTION('',(1.,0.,0.)); +#462545 = ORIENTED_EDGE('',*,*,#462546,.T.); +#462546 = EDGE_CURVE('',#462539,#462547,#462549,.T.); +#462547 = VERTEX_POINT('',#462548); +#462548 = CARTESIAN_POINT('',(137.789225,-136.42741,-7.5E-02)); +#462549 = LINE('',#462550,#462551); +#462550 = CARTESIAN_POINT('',(137.789225,-136.715501,-7.5E-02)); +#462551 = VECTOR('',#462552,1.); +#462552 = DIRECTION('',(0.,1.,0.)); +#462553 = ORIENTED_EDGE('',*,*,#462554,.T.); +#462554 = EDGE_CURVE('',#462547,#462555,#462557,.T.); +#462555 = VERTEX_POINT('',#462556); +#462556 = CARTESIAN_POINT('',(138.077316,-136.42741,-7.5E-02)); +#462557 = LINE('',#462558,#462559); +#462558 = CARTESIAN_POINT('',(137.789225,-136.42741,-7.5E-02)); +#462559 = VECTOR('',#462560,1.); +#462560 = DIRECTION('',(1.,0.,0.)); +#462561 = ORIENTED_EDGE('',*,*,#462562,.T.); +#462562 = EDGE_CURVE('',#462555,#462563,#462565,.T.); +#462563 = VERTEX_POINT('',#462564); +#462564 = CARTESIAN_POINT('',(138.077316,-136.715501,-7.5E-02)); +#462565 = LINE('',#462566,#462567); +#462566 = CARTESIAN_POINT('',(138.077316,-136.42741,-7.5E-02)); +#462567 = VECTOR('',#462568,1.); +#462568 = DIRECTION('',(0.,-1.,0.)); +#462569 = ORIENTED_EDGE('',*,*,#462570,.T.); +#462570 = EDGE_CURVE('',#462563,#462571,#462573,.T.); +#462571 = VERTEX_POINT('',#462572); +#462572 = CARTESIAN_POINT('',(139.229679,-136.715501,-7.5E-02)); +#462573 = LINE('',#462574,#462575); +#462574 = CARTESIAN_POINT('',(138.077316,-136.715501,-7.5E-02)); +#462575 = VECTOR('',#462576,1.); +#462576 = DIRECTION('',(1.,0.,0.)); +#462577 = ORIENTED_EDGE('',*,*,#462578,.T.); +#462578 = EDGE_CURVE('',#462571,#462579,#462581,.T.); +#462579 = VERTEX_POINT('',#462580); +#462580 = CARTESIAN_POINT('',(139.229679,-137.291682,-7.5E-02)); +#462581 = LINE('',#462582,#462583); +#462582 = CARTESIAN_POINT('',(139.229679,-136.715501,-7.5E-02)); +#462583 = VECTOR('',#462584,1.); +#462584 = DIRECTION('',(0.,-1.,0.)); +#462585 = ORIENTED_EDGE('',*,*,#462586,.T.); +#462586 = EDGE_CURVE('',#462579,#462587,#462589,.T.); +#462587 = VERTEX_POINT('',#462588); +#462588 = CARTESIAN_POINT('',(138.653497,-137.291682,-7.5E-02)); +#462589 = LINE('',#462590,#462591); +#462590 = CARTESIAN_POINT('',(139.229679,-137.291682,-7.5E-02)); +#462591 = VECTOR('',#462592,1.); +#462592 = DIRECTION('',(-1.,0.,0.)); +#462593 = ORIENTED_EDGE('',*,*,#462594,.T.); +#462594 = EDGE_CURVE('',#462587,#462595,#462597,.T.); +#462595 = VERTEX_POINT('',#462596); +#462596 = CARTESIAN_POINT('',(138.653497,-137.003592,-7.5E-02)); +#462597 = LINE('',#462598,#462599); +#462598 = CARTESIAN_POINT('',(138.653497,-137.291682,-7.5E-02)); +#462599 = VECTOR('',#462600,1.); +#462600 = DIRECTION('',(0.,1.,0.)); +#462601 = ORIENTED_EDGE('',*,*,#462602,.T.); +#462602 = EDGE_CURVE('',#462595,#462603,#462605,.T.); +#462603 = VERTEX_POINT('',#462604); +#462604 = CARTESIAN_POINT('',(137.789225,-137.003592,-7.5E-02)); +#462605 = LINE('',#462606,#462607); +#462606 = CARTESIAN_POINT('',(138.653497,-137.003592,-7.5E-02)); +#462607 = VECTOR('',#462608,1.); +#462608 = DIRECTION('',(-1.,0.,0.)); +#462609 = ORIENTED_EDGE('',*,*,#462610,.T.); +#462610 = EDGE_CURVE('',#462603,#462611,#462613,.T.); +#462611 = VERTEX_POINT('',#462612); +#462612 = CARTESIAN_POINT('',(137.789225,-137.291682,-7.5E-02)); +#462613 = LINE('',#462614,#462615); +#462614 = CARTESIAN_POINT('',(137.789225,-137.003592,-7.5E-02)); +#462615 = VECTOR('',#462616,1.); +#462616 = DIRECTION('',(0.,-1.,0.)); +#462617 = ORIENTED_EDGE('',*,*,#462618,.T.); +#462618 = EDGE_CURVE('',#462611,#462619,#462621,.T.); +#462619 = VERTEX_POINT('',#462620); +#462620 = CARTESIAN_POINT('',(138.077316,-137.291682,-7.5E-02)); +#462621 = LINE('',#462622,#462623); +#462622 = CARTESIAN_POINT('',(137.789225,-137.291682,-7.5E-02)); +#462623 = VECTOR('',#462624,1.); +#462624 = DIRECTION('',(1.,0.,0.)); +#462625 = ORIENTED_EDGE('',*,*,#462626,.T.); +#462626 = EDGE_CURVE('',#462619,#462627,#462629,.T.); +#462627 = VERTEX_POINT('',#462628); +#462628 = CARTESIAN_POINT('',(138.077316,-137.579773,-7.5E-02)); +#462629 = LINE('',#462630,#462631); +#462630 = CARTESIAN_POINT('',(138.077316,-137.291682,-7.5E-02)); +#462631 = VECTOR('',#462632,1.); +#462632 = DIRECTION('',(0.,-1.,0.)); +#462633 = ORIENTED_EDGE('',*,*,#462634,.T.); +#462634 = EDGE_CURVE('',#462627,#462635,#462637,.T.); +#462635 = VERTEX_POINT('',#462636); +#462636 = CARTESIAN_POINT('',(137.789225,-137.579773,-7.5E-02)); +#462637 = LINE('',#462638,#462639); +#462638 = CARTESIAN_POINT('',(138.077316,-137.579773,-7.5E-02)); +#462639 = VECTOR('',#462640,1.); +#462640 = DIRECTION('',(-1.,0.,0.)); +#462641 = ORIENTED_EDGE('',*,*,#462642,.T.); +#462642 = EDGE_CURVE('',#462635,#462643,#462645,.T.); +#462643 = VERTEX_POINT('',#462644); +#462644 = CARTESIAN_POINT('',(137.789225,-137.867864,-7.5E-02)); +#462645 = LINE('',#462646,#462647); +#462646 = CARTESIAN_POINT('',(137.789225,-137.579773,-7.5E-02)); +#462647 = VECTOR('',#462648,1.); +#462648 = DIRECTION('',(0.,-1.,0.)); +#462649 = ORIENTED_EDGE('',*,*,#462650,.T.); +#462650 = EDGE_CURVE('',#462643,#462651,#462653,.T.); +#462651 = VERTEX_POINT('',#462652); +#462652 = CARTESIAN_POINT('',(138.077316,-137.867864,-7.5E-02)); +#462653 = LINE('',#462654,#462655); +#462654 = CARTESIAN_POINT('',(137.789225,-137.867864,-7.5E-02)); +#462655 = VECTOR('',#462656,1.); +#462656 = DIRECTION('',(1.,0.,0.)); +#462657 = ORIENTED_EDGE('',*,*,#462658,.T.); +#462658 = EDGE_CURVE('',#462651,#462627,#462659,.T.); +#462659 = LINE('',#462660,#462661); +#462660 = CARTESIAN_POINT('',(138.077316,-137.867864,-7.5E-02)); +#462661 = VECTOR('',#462662,1.); +#462662 = DIRECTION('',(0.,1.,0.)); +#462663 = ORIENTED_EDGE('',*,*,#462664,.T.); +#462664 = EDGE_CURVE('',#462627,#462665,#462667,.T.); +#462665 = VERTEX_POINT('',#462666); +#462666 = CARTESIAN_POINT('',(138.365407,-137.579773,-7.5E-02)); +#462667 = LINE('',#462668,#462669); +#462668 = CARTESIAN_POINT('',(138.077316,-137.579773,-7.5E-02)); +#462669 = VECTOR('',#462670,1.); +#462670 = DIRECTION('',(1.,0.,0.)); +#462671 = ORIENTED_EDGE('',*,*,#462672,.T.); +#462672 = EDGE_CURVE('',#462665,#462673,#462675,.T.); +#462673 = VERTEX_POINT('',#462674); +#462674 = CARTESIAN_POINT('',(138.365407,-137.867864,-7.5E-02)); +#462675 = LINE('',#462676,#462677); +#462676 = CARTESIAN_POINT('',(138.365407,-137.579773,-7.5E-02)); +#462677 = VECTOR('',#462678,1.); +#462678 = DIRECTION('',(0.,-1.,0.)); +#462679 = ORIENTED_EDGE('',*,*,#462680,.T.); +#462680 = EDGE_CURVE('',#462673,#462681,#462683,.T.); +#462681 = VERTEX_POINT('',#462682); +#462682 = CARTESIAN_POINT('',(138.653497,-137.867864,-7.5E-02)); +#462683 = LINE('',#462684,#462685); +#462684 = CARTESIAN_POINT('',(138.365407,-137.867864,-7.5E-02)); +#462685 = VECTOR('',#462686,1.); +#462686 = DIRECTION('',(1.,0.,0.)); +#462687 = ORIENTED_EDGE('',*,*,#462688,.T.); +#462688 = EDGE_CURVE('',#462681,#462689,#462691,.T.); +#462689 = VERTEX_POINT('',#462690); +#462690 = CARTESIAN_POINT('',(138.653497,-137.579773,-7.5E-02)); +#462691 = LINE('',#462692,#462693); +#462692 = CARTESIAN_POINT('',(138.653497,-137.867864,-7.5E-02)); +#462693 = VECTOR('',#462694,1.); +#462694 = DIRECTION('',(0.,1.,0.)); +#462695 = ORIENTED_EDGE('',*,*,#462696,.T.); +#462696 = EDGE_CURVE('',#462689,#462697,#462699,.T.); +#462697 = VERTEX_POINT('',#462698); +#462698 = CARTESIAN_POINT('',(138.941588,-137.579773,-7.5E-02)); +#462699 = LINE('',#462700,#462701); +#462700 = CARTESIAN_POINT('',(138.653497,-137.579773,-7.5E-02)); +#462701 = VECTOR('',#462702,1.); +#462702 = DIRECTION('',(1.,0.,0.)); +#462703 = ORIENTED_EDGE('',*,*,#462704,.T.); +#462704 = EDGE_CURVE('',#462697,#462705,#462707,.T.); +#462705 = VERTEX_POINT('',#462706); +#462706 = CARTESIAN_POINT('',(138.941588,-137.867864,-7.5E-02)); +#462707 = LINE('',#462708,#462709); +#462708 = CARTESIAN_POINT('',(138.941588,-137.579773,-7.5E-02)); +#462709 = VECTOR('',#462710,1.); +#462710 = DIRECTION('',(0.,-1.,0.)); +#462711 = ORIENTED_EDGE('',*,*,#462712,.T.); +#462712 = EDGE_CURVE('',#462705,#462681,#462713,.T.); +#462713 = LINE('',#462714,#462715); +#462714 = CARTESIAN_POINT('',(138.941588,-137.867864,-7.5E-02)); +#462715 = VECTOR('',#462716,1.); +#462716 = DIRECTION('',(-1.,0.,0.)); +#462717 = ORIENTED_EDGE('',*,*,#462718,.T.); +#462718 = EDGE_CURVE('',#462681,#462719,#462721,.T.); +#462719 = VERTEX_POINT('',#462720); +#462720 = CARTESIAN_POINT('',(138.653497,-138.155954,-7.5E-02)); +#462721 = LINE('',#462722,#462723); +#462722 = CARTESIAN_POINT('',(138.653497,-137.867864,-7.5E-02)); +#462723 = VECTOR('',#462724,1.); +#462724 = DIRECTION('',(0.,-1.,0.)); +#462725 = ORIENTED_EDGE('',*,*,#462726,.T.); +#462726 = EDGE_CURVE('',#462719,#462727,#462729,.T.); +#462727 = VERTEX_POINT('',#462728); +#462728 = CARTESIAN_POINT('',(138.941588,-138.155954,-7.5E-02)); +#462729 = LINE('',#462730,#462731); +#462730 = CARTESIAN_POINT('',(138.653497,-138.155954,-7.5E-02)); +#462731 = VECTOR('',#462732,1.); +#462732 = DIRECTION('',(1.,0.,0.)); +#462733 = ORIENTED_EDGE('',*,*,#462734,.T.); +#462734 = EDGE_CURVE('',#462727,#462705,#462735,.T.); +#462735 = LINE('',#462736,#462737); +#462736 = CARTESIAN_POINT('',(138.941588,-138.155954,-7.5E-02)); +#462737 = VECTOR('',#462738,1.); +#462738 = DIRECTION('',(0.,1.,0.)); +#462739 = ORIENTED_EDGE('',*,*,#462740,.T.); +#462740 = EDGE_CURVE('',#462705,#462741,#462743,.T.); +#462741 = VERTEX_POINT('',#462742); +#462742 = CARTESIAN_POINT('',(139.229679,-137.867864,-7.5E-02)); +#462743 = LINE('',#462744,#462745); +#462744 = CARTESIAN_POINT('',(138.941588,-137.867864,-7.5E-02)); +#462745 = VECTOR('',#462746,1.); +#462746 = DIRECTION('',(1.,0.,0.)); +#462747 = ORIENTED_EDGE('',*,*,#462748,.T.); +#462748 = EDGE_CURVE('',#462741,#462749,#462751,.T.); +#462749 = VERTEX_POINT('',#462750); +#462750 = CARTESIAN_POINT('',(139.229679,-138.444045,-7.5E-02)); +#462751 = LINE('',#462752,#462753); +#462752 = CARTESIAN_POINT('',(139.229679,-137.867864,-7.5E-02)); +#462753 = VECTOR('',#462754,1.); +#462754 = DIRECTION('',(0.,-1.,0.)); +#462755 = ORIENTED_EDGE('',*,*,#462756,.T.); +#462756 = EDGE_CURVE('',#462749,#462757,#462759,.T.); +#462757 = VERTEX_POINT('',#462758); +#462758 = CARTESIAN_POINT('',(138.653497,-138.444045,-7.5E-02)); +#462759 = LINE('',#462760,#462761); +#462760 = CARTESIAN_POINT('',(139.229679,-138.444045,-7.5E-02)); +#462761 = VECTOR('',#462762,1.); +#462762 = DIRECTION('',(-1.,0.,0.)); +#462763 = ORIENTED_EDGE('',*,*,#462764,.T.); +#462764 = EDGE_CURVE('',#462757,#462765,#462767,.T.); +#462765 = VERTEX_POINT('',#462766); +#462766 = CARTESIAN_POINT('',(138.653497,-138.732136,-7.5E-02)); +#462767 = LINE('',#462768,#462769); +#462768 = CARTESIAN_POINT('',(138.653497,-138.444045,-7.5E-02)); +#462769 = VECTOR('',#462770,1.); +#462770 = DIRECTION('',(0.,-1.,0.)); +#462771 = ORIENTED_EDGE('',*,*,#462772,.T.); +#462772 = EDGE_CURVE('',#462765,#462773,#462775,.T.); +#462773 = VERTEX_POINT('',#462774); +#462774 = CARTESIAN_POINT('',(138.365407,-138.732136,-7.5E-02)); +#462775 = LINE('',#462776,#462777); +#462776 = CARTESIAN_POINT('',(138.653497,-138.732136,-7.5E-02)); +#462777 = VECTOR('',#462778,1.); +#462778 = DIRECTION('',(-1.,0.,0.)); +#462779 = ORIENTED_EDGE('',*,*,#462780,.T.); +#462780 = EDGE_CURVE('',#462773,#462781,#462783,.T.); +#462781 = VERTEX_POINT('',#462782); +#462782 = CARTESIAN_POINT('',(138.365407,-139.020227,-7.5E-02)); +#462783 = LINE('',#462784,#462785); +#462784 = CARTESIAN_POINT('',(138.365407,-138.732136,-7.5E-02)); +#462785 = VECTOR('',#462786,1.); +#462786 = DIRECTION('',(0.,-1.,0.)); +#462787 = ORIENTED_EDGE('',*,*,#462788,.T.); +#462788 = EDGE_CURVE('',#462781,#462789,#462791,.T.); +#462789 = VERTEX_POINT('',#462790); +#462790 = CARTESIAN_POINT('',(138.077316,-139.020227,-7.5E-02)); +#462791 = LINE('',#462792,#462793); +#462792 = CARTESIAN_POINT('',(138.365407,-139.020227,-7.5E-02)); +#462793 = VECTOR('',#462794,1.); +#462794 = DIRECTION('',(-1.,0.,0.)); +#462795 = ORIENTED_EDGE('',*,*,#462796,.T.); +#462796 = EDGE_CURVE('',#462789,#462797,#462799,.T.); +#462797 = VERTEX_POINT('',#462798); +#462798 = CARTESIAN_POINT('',(138.077316,-139.308317,-7.5E-02)); +#462799 = LINE('',#462800,#462801); +#462800 = CARTESIAN_POINT('',(138.077316,-139.020227,-7.5E-02)); +#462801 = VECTOR('',#462802,1.); +#462802 = DIRECTION('',(0.,-1.,0.)); +#462803 = ORIENTED_EDGE('',*,*,#462804,.T.); +#462804 = EDGE_CURVE('',#462797,#462805,#462807,.T.); +#462805 = VERTEX_POINT('',#462806); +#462806 = CARTESIAN_POINT('',(138.365407,-139.308317,-7.5E-02)); +#462807 = LINE('',#462808,#462809); +#462808 = CARTESIAN_POINT('',(138.077316,-139.308317,-7.5E-02)); +#462809 = VECTOR('',#462810,1.); +#462810 = DIRECTION('',(1.,0.,0.)); +#462811 = ORIENTED_EDGE('',*,*,#462812,.T.); +#462812 = EDGE_CURVE('',#462805,#462781,#462813,.T.); +#462813 = LINE('',#462814,#462815); +#462814 = CARTESIAN_POINT('',(138.365407,-139.308317,-7.5E-02)); +#462815 = VECTOR('',#462816,1.); +#462816 = DIRECTION('',(0.,1.,0.)); +#462817 = ORIENTED_EDGE('',*,*,#462818,.T.); +#462818 = EDGE_CURVE('',#462781,#462819,#462821,.T.); +#462819 = VERTEX_POINT('',#462820); +#462820 = CARTESIAN_POINT('',(138.941588,-139.020227,-7.5E-02)); +#462821 = LINE('',#462822,#462823); +#462822 = CARTESIAN_POINT('',(138.365407,-139.020227,-7.5E-02)); +#462823 = VECTOR('',#462824,1.); +#462824 = DIRECTION('',(1.,0.,0.)); +#462825 = ORIENTED_EDGE('',*,*,#462826,.T.); +#462826 = EDGE_CURVE('',#462819,#462827,#462829,.T.); +#462827 = VERTEX_POINT('',#462828); +#462828 = CARTESIAN_POINT('',(138.941588,-139.308317,-7.5E-02)); +#462829 = LINE('',#462830,#462831); +#462830 = CARTESIAN_POINT('',(138.941588,-139.020227,-7.5E-02)); +#462831 = VECTOR('',#462832,1.); +#462832 = DIRECTION('',(0.,-1.,0.)); +#462833 = ORIENTED_EDGE('',*,*,#462834,.T.); +#462834 = EDGE_CURVE('',#462827,#462805,#462835,.T.); +#462835 = LINE('',#462836,#462837); +#462836 = CARTESIAN_POINT('',(138.941588,-139.308317,-7.5E-02)); +#462837 = VECTOR('',#462838,1.); +#462838 = DIRECTION('',(-1.,0.,0.)); +#462839 = ORIENTED_EDGE('',*,*,#462840,.T.); +#462840 = EDGE_CURVE('',#462805,#462841,#462843,.T.); +#462841 = VERTEX_POINT('',#462842); +#462842 = CARTESIAN_POINT('',(138.365407,-139.596408,-7.5E-02)); +#462843 = LINE('',#462844,#462845); +#462844 = CARTESIAN_POINT('',(138.365407,-139.308317,-7.5E-02)); +#462845 = VECTOR('',#462846,1.); +#462846 = DIRECTION('',(0.,-1.,0.)); +#462847 = ORIENTED_EDGE('',*,*,#462848,.T.); +#462848 = EDGE_CURVE('',#462841,#462849,#462851,.T.); +#462849 = VERTEX_POINT('',#462850); +#462850 = CARTESIAN_POINT('',(138.941588,-139.596408,-7.5E-02)); +#462851 = LINE('',#462852,#462853); +#462852 = CARTESIAN_POINT('',(138.365407,-139.596408,-7.5E-02)); +#462853 = VECTOR('',#462854,1.); +#462854 = DIRECTION('',(1.,0.,0.)); +#462855 = ORIENTED_EDGE('',*,*,#462856,.T.); +#462856 = EDGE_CURVE('',#462849,#462857,#462859,.T.); +#462857 = VERTEX_POINT('',#462858); +#462858 = CARTESIAN_POINT('',(138.941588,-140.17259,-7.5E-02)); +#462859 = LINE('',#462860,#462861); +#462860 = CARTESIAN_POINT('',(138.941588,-139.596408,-7.5E-02)); +#462861 = VECTOR('',#462862,1.); +#462862 = DIRECTION('',(0.,-1.,0.)); +#462863 = ORIENTED_EDGE('',*,*,#462864,.T.); +#462864 = EDGE_CURVE('',#462857,#462865,#462867,.T.); +#462865 = VERTEX_POINT('',#462866); +#462866 = CARTESIAN_POINT('',(138.653497,-140.17259,-7.5E-02)); +#462867 = LINE('',#462868,#462869); +#462868 = CARTESIAN_POINT('',(138.941588,-140.17259,-7.5E-02)); +#462869 = VECTOR('',#462870,1.); +#462870 = DIRECTION('',(-1.,0.,0.)); +#462871 = ORIENTED_EDGE('',*,*,#462872,.T.); +#462872 = EDGE_CURVE('',#462865,#462873,#462875,.T.); +#462873 = VERTEX_POINT('',#462874); +#462874 = CARTESIAN_POINT('',(138.653497,-139.884499,-7.5E-02)); +#462875 = LINE('',#462876,#462877); +#462876 = CARTESIAN_POINT('',(138.653497,-140.17259,-7.5E-02)); +#462877 = VECTOR('',#462878,1.); +#462878 = DIRECTION('',(0.,1.,0.)); +#462879 = ORIENTED_EDGE('',*,*,#462880,.T.); +#462880 = EDGE_CURVE('',#462873,#462881,#462883,.T.); +#462881 = VERTEX_POINT('',#462882); +#462882 = CARTESIAN_POINT('',(138.365407,-139.884499,-7.5E-02)); +#462883 = LINE('',#462884,#462885); +#462884 = CARTESIAN_POINT('',(138.653497,-139.884499,-7.5E-02)); +#462885 = VECTOR('',#462886,1.); +#462886 = DIRECTION('',(-1.,0.,0.)); +#462887 = ORIENTED_EDGE('',*,*,#462888,.T.); +#462888 = EDGE_CURVE('',#462881,#462889,#462891,.T.); +#462889 = VERTEX_POINT('',#462890); +#462890 = CARTESIAN_POINT('',(138.365407,-140.46068,-7.5E-02)); +#462891 = LINE('',#462892,#462893); +#462892 = CARTESIAN_POINT('',(138.365407,-139.884499,-7.5E-02)); +#462893 = VECTOR('',#462894,1.); +#462894 = DIRECTION('',(0.,-1.,0.)); +#462895 = ORIENTED_EDGE('',*,*,#462896,.T.); +#462896 = EDGE_CURVE('',#462889,#462897,#462899,.T.); +#462897 = VERTEX_POINT('',#462898); +#462898 = CARTESIAN_POINT('',(138.653497,-140.46068,-7.5E-02)); +#462899 = LINE('',#462900,#462901); +#462900 = CARTESIAN_POINT('',(138.365407,-140.46068,-7.5E-02)); +#462901 = VECTOR('',#462902,1.); +#462902 = DIRECTION('',(1.,0.,0.)); +#462903 = ORIENTED_EDGE('',*,*,#462904,.T.); +#462904 = EDGE_CURVE('',#462897,#462905,#462907,.T.); +#462905 = VERTEX_POINT('',#462906); +#462906 = CARTESIAN_POINT('',(138.653497,-140.748771,-7.5E-02)); +#462907 = LINE('',#462908,#462909); +#462908 = CARTESIAN_POINT('',(138.653497,-140.46068,-7.5E-02)); +#462909 = VECTOR('',#462910,1.); +#462910 = DIRECTION('',(0.,-1.,0.)); +#462911 = ORIENTED_EDGE('',*,*,#462912,.T.); +#462912 = EDGE_CURVE('',#462905,#462913,#462915,.T.); +#462913 = VERTEX_POINT('',#462914); +#462914 = CARTESIAN_POINT('',(138.941588,-140.748771,-7.5E-02)); +#462915 = LINE('',#462916,#462917); +#462916 = CARTESIAN_POINT('',(138.653497,-140.748771,-7.5E-02)); +#462917 = VECTOR('',#462918,1.); +#462918 = DIRECTION('',(1.,0.,0.)); +#462919 = ORIENTED_EDGE('',*,*,#462920,.T.); +#462920 = EDGE_CURVE('',#462913,#462857,#462921,.T.); +#462921 = LINE('',#462922,#462923); +#462922 = CARTESIAN_POINT('',(138.941588,-140.748771,-7.5E-02)); +#462923 = VECTOR('',#462924,1.); +#462924 = DIRECTION('',(0.,1.,0.)); +#462925 = ORIENTED_EDGE('',*,*,#462926,.T.); +#462926 = EDGE_CURVE('',#462857,#462927,#462929,.T.); +#462927 = VERTEX_POINT('',#462928); +#462928 = CARTESIAN_POINT('',(139.229679,-140.17259,-7.5E-02)); +#462929 = LINE('',#462930,#462931); +#462930 = CARTESIAN_POINT('',(138.941588,-140.17259,-7.5E-02)); +#462931 = VECTOR('',#462932,1.); +#462932 = DIRECTION('',(1.,0.,0.)); +#462933 = ORIENTED_EDGE('',*,*,#462934,.T.); +#462934 = EDGE_CURVE('',#462927,#462935,#462937,.T.); +#462935 = VERTEX_POINT('',#462936); +#462936 = CARTESIAN_POINT('',(139.229679,-141.324953,-7.5E-02)); +#462937 = LINE('',#462938,#462939); +#462938 = CARTESIAN_POINT('',(139.229679,-140.17259,-7.5E-02)); +#462939 = VECTOR('',#462940,1.); +#462940 = DIRECTION('',(0.,-1.,0.)); +#462941 = ORIENTED_EDGE('',*,*,#462942,.T.); +#462942 = EDGE_CURVE('',#462935,#462943,#462945,.T.); +#462943 = VERTEX_POINT('',#462944); +#462944 = CARTESIAN_POINT('',(138.365407,-141.324953,-7.5E-02)); +#462945 = LINE('',#462946,#462947); +#462946 = CARTESIAN_POINT('',(139.229679,-141.324953,-7.5E-02)); +#462947 = VECTOR('',#462948,1.); +#462948 = DIRECTION('',(-1.,0.,0.)); +#462949 = ORIENTED_EDGE('',*,*,#462950,.T.); +#462950 = EDGE_CURVE('',#462943,#462951,#462953,.T.); +#462951 = VERTEX_POINT('',#462952); +#462952 = CARTESIAN_POINT('',(138.365407,-141.036862,-7.5E-02)); +#462953 = LINE('',#462954,#462955); +#462954 = CARTESIAN_POINT('',(138.365407,-141.324953,-7.5E-02)); +#462955 = VECTOR('',#462956,1.); +#462956 = DIRECTION('',(0.,1.,0.)); +#462957 = ORIENTED_EDGE('',*,*,#462958,.T.); +#462958 = EDGE_CURVE('',#462951,#462959,#462961,.T.); +#462959 = VERTEX_POINT('',#462960); +#462960 = CARTESIAN_POINT('',(138.077316,-141.036862,-7.5E-02)); +#462961 = LINE('',#462962,#462963); +#462962 = CARTESIAN_POINT('',(138.365407,-141.036862,-7.5E-02)); +#462963 = VECTOR('',#462964,1.); +#462964 = DIRECTION('',(-1.,0.,0.)); +#462965 = ORIENTED_EDGE('',*,*,#462966,.T.); +#462966 = EDGE_CURVE('',#462959,#462967,#462969,.T.); +#462967 = VERTEX_POINT('',#462968); +#462968 = CARTESIAN_POINT('',(138.077316,-140.748771,-7.5E-02)); +#462969 = LINE('',#462970,#462971); +#462970 = CARTESIAN_POINT('',(138.077316,-141.036862,-7.5E-02)); +#462971 = VECTOR('',#462972,1.); +#462972 = DIRECTION('',(0.,1.,0.)); +#462973 = ORIENTED_EDGE('',*,*,#462974,.T.); +#462974 = EDGE_CURVE('',#462967,#462975,#462977,.T.); +#462975 = VERTEX_POINT('',#462976); +#462976 = CARTESIAN_POINT('',(137.789225,-140.748771,-7.5E-02)); +#462977 = LINE('',#462978,#462979); +#462978 = CARTESIAN_POINT('',(138.077316,-140.748771,-7.5E-02)); +#462979 = VECTOR('',#462980,1.); +#462980 = DIRECTION('',(-1.,0.,0.)); +#462981 = ORIENTED_EDGE('',*,*,#462982,.T.); +#462982 = EDGE_CURVE('',#462975,#462983,#462985,.T.); +#462983 = VERTEX_POINT('',#462984); +#462984 = CARTESIAN_POINT('',(137.789225,-141.324953,-7.5E-02)); +#462985 = LINE('',#462986,#462987); +#462986 = CARTESIAN_POINT('',(137.789225,-140.748771,-7.5E-02)); +#462987 = VECTOR('',#462988,1.); +#462988 = DIRECTION('',(0.,-1.,0.)); +#462989 = ORIENTED_EDGE('',*,*,#462990,.T.); +#462990 = EDGE_CURVE('',#462983,#462991,#462993,.T.); +#462991 = VERTEX_POINT('',#462992); +#462992 = CARTESIAN_POINT('',(136.636862,-141.324953,-7.5E-02)); +#462993 = LINE('',#462994,#462995); +#462994 = CARTESIAN_POINT('',(137.789225,-141.324953,-7.5E-02)); +#462995 = VECTOR('',#462996,1.); +#462996 = DIRECTION('',(-1.,0.,0.)); +#462997 = ORIENTED_EDGE('',*,*,#462998,.T.); +#462998 = EDGE_CURVE('',#462991,#462999,#463001,.T.); +#462999 = VERTEX_POINT('',#463000); +#463000 = CARTESIAN_POINT('',(136.636862,-141.036862,-7.5E-02)); +#463001 = LINE('',#463002,#463003); +#463002 = CARTESIAN_POINT('',(136.636862,-141.324953,-7.5E-02)); +#463003 = VECTOR('',#463004,1.); +#463004 = DIRECTION('',(0.,1.,0.)); +#463005 = ORIENTED_EDGE('',*,*,#463006,.T.); +#463006 = EDGE_CURVE('',#462999,#463007,#463009,.T.); +#463007 = VERTEX_POINT('',#463008); +#463008 = CARTESIAN_POINT('',(137.501134,-141.036862,-7.5E-02)); +#463009 = LINE('',#463010,#463011); +#463010 = CARTESIAN_POINT('',(136.636862,-141.036862,-7.5E-02)); +#463011 = VECTOR('',#463012,1.); +#463012 = DIRECTION('',(1.,0.,0.)); +#463013 = ORIENTED_EDGE('',*,*,#463014,.T.); +#463014 = EDGE_CURVE('',#463007,#463015,#463017,.T.); +#463015 = VERTEX_POINT('',#463016); +#463016 = CARTESIAN_POINT('',(137.501134,-140.748771,-7.5E-02)); +#463017 = LINE('',#463018,#463019); +#463018 = CARTESIAN_POINT('',(137.501134,-141.036862,-7.5E-02)); +#463019 = VECTOR('',#463020,1.); +#463020 = DIRECTION('',(0.,1.,0.)); +#463021 = ORIENTED_EDGE('',*,*,#463022,.T.); +#463022 = EDGE_CURVE('',#463015,#463023,#463025,.T.); +#463023 = VERTEX_POINT('',#463024); +#463024 = CARTESIAN_POINT('',(137.213044,-140.748771,-7.5E-02)); +#463025 = LINE('',#463026,#463027); +#463026 = CARTESIAN_POINT('',(137.501134,-140.748771,-7.5E-02)); +#463027 = VECTOR('',#463028,1.); +#463028 = DIRECTION('',(-1.,0.,0.)); +#463029 = ORIENTED_EDGE('',*,*,#463030,.T.); +#463030 = EDGE_CURVE('',#463023,#463031,#463033,.T.); +#463031 = VERTEX_POINT('',#463032); +#463032 = CARTESIAN_POINT('',(137.213044,-140.46068,-7.5E-02)); +#463033 = LINE('',#463034,#463035); +#463034 = CARTESIAN_POINT('',(137.213044,-140.748771,-7.5E-02)); +#463035 = VECTOR('',#463036,1.); +#463036 = DIRECTION('',(0.,1.,0.)); +#463037 = ORIENTED_EDGE('',*,*,#463038,.T.); +#463038 = EDGE_CURVE('',#463031,#463039,#463041,.T.); +#463039 = VERTEX_POINT('',#463040); +#463040 = CARTESIAN_POINT('',(137.501134,-140.46068,-7.5E-02)); +#463041 = LINE('',#463042,#463043); +#463042 = CARTESIAN_POINT('',(137.213044,-140.46068,-7.5E-02)); +#463043 = VECTOR('',#463044,1.); +#463044 = DIRECTION('',(1.,0.,0.)); +#463045 = ORIENTED_EDGE('',*,*,#463046,.T.); +#463046 = EDGE_CURVE('',#463039,#463047,#463049,.T.); +#463047 = VERTEX_POINT('',#463048); +#463048 = CARTESIAN_POINT('',(137.501134,-140.17259,-7.5E-02)); +#463049 = LINE('',#463050,#463051); +#463050 = CARTESIAN_POINT('',(137.501134,-140.46068,-7.5E-02)); +#463051 = VECTOR('',#463052,1.); +#463052 = DIRECTION('',(0.,1.,0.)); +#463053 = ORIENTED_EDGE('',*,*,#463054,.T.); +#463054 = EDGE_CURVE('',#463047,#463055,#463057,.T.); +#463055 = VERTEX_POINT('',#463056); +#463056 = CARTESIAN_POINT('',(138.077316,-140.17259,-7.5E-02)); +#463057 = LINE('',#463058,#463059); +#463058 = CARTESIAN_POINT('',(137.501134,-140.17259,-7.5E-02)); +#463059 = VECTOR('',#463060,1.); +#463060 = DIRECTION('',(1.,0.,0.)); +#463061 = ORIENTED_EDGE('',*,*,#463062,.T.); +#463062 = EDGE_CURVE('',#463055,#463063,#463065,.T.); +#463063 = VERTEX_POINT('',#463064); +#463064 = CARTESIAN_POINT('',(138.077316,-139.884499,-7.5E-02)); +#463065 = LINE('',#463066,#463067); +#463066 = CARTESIAN_POINT('',(138.077316,-140.17259,-7.5E-02)); +#463067 = VECTOR('',#463068,1.); +#463068 = DIRECTION('',(0.,1.,0.)); +#463069 = ORIENTED_EDGE('',*,*,#463070,.T.); +#463070 = EDGE_CURVE('',#463063,#463071,#463073,.T.); +#463071 = VERTEX_POINT('',#463072); +#463072 = CARTESIAN_POINT('',(137.789225,-139.884499,-7.5E-02)); +#463073 = LINE('',#463074,#463075); +#463074 = CARTESIAN_POINT('',(138.077316,-139.884499,-7.5E-02)); +#463075 = VECTOR('',#463076,1.); +#463076 = DIRECTION('',(-1.,0.,0.)); +#463077 = ORIENTED_EDGE('',*,*,#463078,.T.); +#463078 = EDGE_CURVE('',#463071,#463079,#463081,.T.); +#463079 = VERTEX_POINT('',#463080); +#463080 = CARTESIAN_POINT('',(137.789225,-139.596408,-7.5E-02)); +#463081 = LINE('',#463082,#463083); +#463082 = CARTESIAN_POINT('',(137.789225,-139.884499,-7.5E-02)); +#463083 = VECTOR('',#463084,1.); +#463084 = DIRECTION('',(0.,1.,0.)); +#463085 = ORIENTED_EDGE('',*,*,#463086,.T.); +#463086 = EDGE_CURVE('',#463079,#463087,#463089,.T.); +#463087 = VERTEX_POINT('',#463088); +#463088 = CARTESIAN_POINT('',(137.213044,-139.596408,-7.5E-02)); +#463089 = LINE('',#463090,#463091); +#463090 = CARTESIAN_POINT('',(137.789225,-139.596408,-7.5E-02)); +#463091 = VECTOR('',#463092,1.); +#463092 = DIRECTION('',(-1.,0.,0.)); +#463093 = ORIENTED_EDGE('',*,*,#463094,.T.); +#463094 = EDGE_CURVE('',#463087,#463095,#463097,.T.); +#463095 = VERTEX_POINT('',#463096); +#463096 = CARTESIAN_POINT('',(137.213044,-139.884499,-7.5E-02)); +#463097 = LINE('',#463098,#463099); +#463098 = CARTESIAN_POINT('',(137.213044,-139.596408,-7.5E-02)); +#463099 = VECTOR('',#463100,1.); +#463100 = DIRECTION('',(0.,-1.,0.)); +#463101 = ORIENTED_EDGE('',*,*,#463102,.T.); +#463102 = EDGE_CURVE('',#463095,#463103,#463105,.T.); +#463103 = VERTEX_POINT('',#463104); +#463104 = CARTESIAN_POINT('',(136.924953,-139.884499,-7.5E-02)); +#463105 = LINE('',#463106,#463107); +#463106 = CARTESIAN_POINT('',(137.213044,-139.884499,-7.5E-02)); +#463107 = VECTOR('',#463108,1.); +#463108 = DIRECTION('',(-1.,0.,0.)); +#463109 = ORIENTED_EDGE('',*,*,#463110,.T.); +#463110 = EDGE_CURVE('',#463103,#463111,#463113,.T.); +#463111 = VERTEX_POINT('',#463112); +#463112 = CARTESIAN_POINT('',(136.924953,-140.17259,-7.5E-02)); +#463113 = LINE('',#463114,#463115); +#463114 = CARTESIAN_POINT('',(136.924953,-139.884499,-7.5E-02)); +#463115 = VECTOR('',#463116,1.); +#463116 = DIRECTION('',(0.,-1.,0.)); +#463117 = ORIENTED_EDGE('',*,*,#463118,.T.); +#463118 = EDGE_CURVE('',#463111,#463119,#463121,.T.); +#463119 = VERTEX_POINT('',#463120); +#463120 = CARTESIAN_POINT('',(136.636862,-140.17259,-7.5E-02)); +#463121 = LINE('',#463122,#463123); +#463122 = CARTESIAN_POINT('',(136.924953,-140.17259,-7.5E-02)); +#463123 = VECTOR('',#463124,1.); +#463124 = DIRECTION('',(-1.,0.,0.)); +#463125 = ORIENTED_EDGE('',*,*,#463126,.T.); +#463126 = EDGE_CURVE('',#463119,#463127,#463129,.T.); +#463127 = VERTEX_POINT('',#463128); +#463128 = CARTESIAN_POINT('',(136.636862,-139.884499,-7.5E-02)); +#463129 = LINE('',#463130,#463131); +#463130 = CARTESIAN_POINT('',(136.636862,-140.17259,-7.5E-02)); +#463131 = VECTOR('',#463132,1.); +#463132 = DIRECTION('',(0.,1.,0.)); +#463133 = ORIENTED_EDGE('',*,*,#463134,.T.); +#463134 = EDGE_CURVE('',#463127,#463135,#463137,.T.); +#463135 = VERTEX_POINT('',#463136); +#463136 = CARTESIAN_POINT('',(136.348771,-139.884499,-7.5E-02)); +#463137 = LINE('',#463138,#463139); +#463138 = CARTESIAN_POINT('',(136.636862,-139.884499,-7.5E-02)); +#463139 = VECTOR('',#463140,1.); +#463140 = DIRECTION('',(-1.,0.,0.)); +#463141 = ORIENTED_EDGE('',*,*,#463142,.T.); +#463142 = EDGE_CURVE('',#463135,#463143,#463145,.T.); +#463143 = VERTEX_POINT('',#463144); +#463144 = CARTESIAN_POINT('',(136.348771,-139.596408,-7.5E-02)); +#463145 = LINE('',#463146,#463147); +#463146 = CARTESIAN_POINT('',(136.348771,-139.884499,-7.5E-02)); +#463147 = VECTOR('',#463148,1.); +#463148 = DIRECTION('',(0.,1.,0.)); +#463149 = ORIENTED_EDGE('',*,*,#463150,.T.); +#463150 = EDGE_CURVE('',#463143,#463151,#463153,.T.); +#463151 = VERTEX_POINT('',#463152); +#463152 = CARTESIAN_POINT('',(136.060681,-139.596408,-7.5E-02)); +#463153 = LINE('',#463154,#463155); +#463154 = CARTESIAN_POINT('',(136.348771,-139.596408,-7.5E-02)); +#463155 = VECTOR('',#463156,1.); +#463156 = DIRECTION('',(-1.,0.,0.)); +#463157 = ORIENTED_EDGE('',*,*,#463158,.T.); +#463158 = EDGE_CURVE('',#463151,#463159,#463161,.T.); +#463159 = VERTEX_POINT('',#463160); +#463160 = CARTESIAN_POINT('',(136.060681,-139.308317,-7.5E-02)); +#463161 = LINE('',#463162,#463163); +#463162 = CARTESIAN_POINT('',(136.060681,-139.596408,-7.5E-02)); +#463163 = VECTOR('',#463164,1.); +#463164 = DIRECTION('',(0.,1.,0.)); +#463165 = ORIENTED_EDGE('',*,*,#463166,.T.); +#463166 = EDGE_CURVE('',#463159,#463167,#463169,.T.); +#463167 = VERTEX_POINT('',#463168); +#463168 = CARTESIAN_POINT('',(136.924953,-139.308317,-7.5E-02)); +#463169 = LINE('',#463170,#463171); +#463170 = CARTESIAN_POINT('',(136.060681,-139.308317,-7.5E-02)); +#463171 = VECTOR('',#463172,1.); +#463172 = DIRECTION('',(1.,0.,0.)); +#463173 = ORIENTED_EDGE('',*,*,#463174,.T.); +#463174 = EDGE_CURVE('',#463167,#463175,#463177,.T.); +#463175 = VERTEX_POINT('',#463176); +#463176 = CARTESIAN_POINT('',(136.924953,-139.020227,-7.5E-02)); +#463177 = LINE('',#463178,#463179); +#463178 = CARTESIAN_POINT('',(136.924953,-139.308317,-7.5E-02)); +#463179 = VECTOR('',#463180,1.); +#463180 = DIRECTION('',(0.,1.,0.)); +#463181 = ORIENTED_EDGE('',*,*,#463182,.T.); +#463182 = EDGE_CURVE('',#463175,#463183,#463185,.T.); +#463183 = VERTEX_POINT('',#463184); +#463184 = CARTESIAN_POINT('',(137.213044,-139.020227,-7.5E-02)); +#463185 = LINE('',#463186,#463187); +#463186 = CARTESIAN_POINT('',(136.924953,-139.020227,-7.5E-02)); +#463187 = VECTOR('',#463188,1.); +#463188 = DIRECTION('',(1.,0.,0.)); +#463189 = ORIENTED_EDGE('',*,*,#463190,.T.); +#463190 = EDGE_CURVE('',#463183,#463191,#463193,.T.); +#463191 = VERTEX_POINT('',#463192); +#463192 = CARTESIAN_POINT('',(137.213044,-139.308317,-7.5E-02)); +#463193 = LINE('',#463194,#463195); +#463194 = CARTESIAN_POINT('',(137.213044,-139.020227,-7.5E-02)); +#463195 = VECTOR('',#463196,1.); +#463196 = DIRECTION('',(0.,-1.,0.)); +#463197 = ORIENTED_EDGE('',*,*,#463198,.T.); +#463198 = EDGE_CURVE('',#463191,#463199,#463201,.T.); +#463199 = VERTEX_POINT('',#463200); +#463200 = CARTESIAN_POINT('',(137.501134,-139.308317,-7.5E-02)); +#463201 = LINE('',#463202,#463203); +#463202 = CARTESIAN_POINT('',(137.213044,-139.308317,-7.5E-02)); +#463203 = VECTOR('',#463204,1.); +#463204 = DIRECTION('',(1.,0.,0.)); +#463205 = ORIENTED_EDGE('',*,*,#463206,.T.); +#463206 = EDGE_CURVE('',#463199,#463207,#463209,.T.); +#463207 = VERTEX_POINT('',#463208); +#463208 = CARTESIAN_POINT('',(137.501134,-139.020227,-7.5E-02)); +#463209 = LINE('',#463210,#463211); +#463210 = CARTESIAN_POINT('',(137.501134,-139.308317,-7.5E-02)); +#463211 = VECTOR('',#463212,1.); +#463212 = DIRECTION('',(0.,1.,0.)); +#463213 = ORIENTED_EDGE('',*,*,#463214,.T.); +#463214 = EDGE_CURVE('',#463207,#463183,#463215,.T.); +#463215 = LINE('',#463216,#463217); +#463216 = CARTESIAN_POINT('',(137.501134,-139.020227,-7.5E-02)); +#463217 = VECTOR('',#463218,1.); +#463218 = DIRECTION('',(-1.,0.,0.)); +#463219 = ORIENTED_EDGE('',*,*,#463220,.T.); +#463220 = EDGE_CURVE('',#463183,#463221,#463223,.T.); +#463221 = VERTEX_POINT('',#463222); +#463222 = CARTESIAN_POINT('',(137.213044,-138.732136,-7.5E-02)); +#463223 = LINE('',#463224,#463225); +#463224 = CARTESIAN_POINT('',(137.213044,-139.020227,-7.5E-02)); +#463225 = VECTOR('',#463226,1.); +#463226 = DIRECTION('',(0.,1.,0.)); +#463227 = ORIENTED_EDGE('',*,*,#463228,.T.); +#463228 = EDGE_CURVE('',#463221,#463229,#463231,.T.); +#463229 = VERTEX_POINT('',#463230); +#463230 = CARTESIAN_POINT('',(137.501134,-138.732136,-7.5E-02)); +#463231 = LINE('',#463232,#463233); +#463232 = CARTESIAN_POINT('',(137.213044,-138.732136,-7.5E-02)); +#463233 = VECTOR('',#463234,1.); +#463234 = DIRECTION('',(1.,0.,0.)); +#463235 = ORIENTED_EDGE('',*,*,#463236,.T.); +#463236 = EDGE_CURVE('',#463229,#463237,#463239,.T.); +#463237 = VERTEX_POINT('',#463238); +#463238 = CARTESIAN_POINT('',(137.501134,-138.444045,-7.5E-02)); +#463239 = LINE('',#463240,#463241); +#463240 = CARTESIAN_POINT('',(137.501134,-138.732136,-7.5E-02)); +#463241 = VECTOR('',#463242,1.); +#463242 = DIRECTION('',(0.,1.,0.)); +#463243 = ORIENTED_EDGE('',*,*,#463244,.T.); +#463244 = EDGE_CURVE('',#463237,#463245,#463247,.T.); +#463245 = VERTEX_POINT('',#463246); +#463246 = CARTESIAN_POINT('',(137.213044,-138.444045,-7.5E-02)); +#463247 = LINE('',#463248,#463249); +#463248 = CARTESIAN_POINT('',(137.501134,-138.444045,-7.5E-02)); +#463249 = VECTOR('',#463250,1.); +#463250 = DIRECTION('',(-1.,0.,0.)); +#463251 = ORIENTED_EDGE('',*,*,#463252,.T.); +#463252 = EDGE_CURVE('',#463245,#463253,#463255,.T.); +#463253 = VERTEX_POINT('',#463254); +#463254 = CARTESIAN_POINT('',(137.213044,-138.155954,-7.5E-02)); +#463255 = LINE('',#463256,#463257); +#463256 = CARTESIAN_POINT('',(137.213044,-138.444045,-7.5E-02)); +#463257 = VECTOR('',#463258,1.); +#463258 = DIRECTION('',(0.,1.,0.)); +#463259 = ORIENTED_EDGE('',*,*,#463260,.T.); +#463260 = EDGE_CURVE('',#463253,#463261,#463263,.T.); +#463261 = VERTEX_POINT('',#463262); +#463262 = CARTESIAN_POINT('',(137.789225,-138.155954,-7.5E-02)); +#463263 = LINE('',#463264,#463265); +#463264 = CARTESIAN_POINT('',(137.213044,-138.155954,-7.5E-02)); +#463265 = VECTOR('',#463266,1.); +#463266 = DIRECTION('',(1.,0.,0.)); +#463267 = ORIENTED_EDGE('',*,*,#463268,.T.); +#463268 = EDGE_CURVE('',#463261,#462643,#463269,.T.); +#463269 = LINE('',#463270,#463271); +#463270 = CARTESIAN_POINT('',(137.789225,-138.155954,-7.5E-02)); +#463271 = VECTOR('',#463272,1.); +#463272 = DIRECTION('',(0.,1.,0.)); +#463273 = ORIENTED_EDGE('',*,*,#463274,.T.); +#463274 = EDGE_CURVE('',#462643,#463275,#463277,.T.); +#463275 = VERTEX_POINT('',#463276); +#463276 = CARTESIAN_POINT('',(137.213044,-137.867864,-7.5E-02)); +#463277 = LINE('',#463278,#463279); +#463278 = CARTESIAN_POINT('',(137.789225,-137.867864,-7.5E-02)); +#463279 = VECTOR('',#463280,1.); +#463280 = DIRECTION('',(-1.,0.,0.)); +#463281 = ORIENTED_EDGE('',*,*,#463282,.T.); +#463282 = EDGE_CURVE('',#463275,#463253,#463283,.T.); +#463283 = LINE('',#463284,#463285); +#463284 = CARTESIAN_POINT('',(137.213044,-137.867864,-7.5E-02)); +#463285 = VECTOR('',#463286,1.); +#463286 = DIRECTION('',(0.,-1.,0.)); +#463287 = ORIENTED_EDGE('',*,*,#463288,.T.); +#463288 = EDGE_CURVE('',#463253,#463289,#463291,.T.); +#463289 = VERTEX_POINT('',#463290); +#463290 = CARTESIAN_POINT('',(136.924953,-138.155954,-7.5E-02)); +#463291 = LINE('',#463292,#463293); +#463292 = CARTESIAN_POINT('',(137.213044,-138.155954,-7.5E-02)); +#463293 = VECTOR('',#463294,1.); +#463294 = DIRECTION('',(-1.,0.,0.)); +#463295 = ORIENTED_EDGE('',*,*,#463296,.T.); +#463296 = EDGE_CURVE('',#463289,#463297,#463299,.T.); +#463297 = VERTEX_POINT('',#463298); +#463298 = CARTESIAN_POINT('',(136.924953,-137.867864,-7.5E-02)); +#463299 = LINE('',#463300,#463301); +#463300 = CARTESIAN_POINT('',(136.924953,-138.155954,-7.5E-02)); +#463301 = VECTOR('',#463302,1.); +#463302 = DIRECTION('',(0.,1.,0.)); +#463303 = ORIENTED_EDGE('',*,*,#463304,.T.); +#463304 = EDGE_CURVE('',#463297,#463305,#463307,.T.); +#463305 = VERTEX_POINT('',#463306); +#463306 = CARTESIAN_POINT('',(136.636862,-137.867864,-7.5E-02)); +#463307 = LINE('',#463308,#463309); +#463308 = CARTESIAN_POINT('',(136.924953,-137.867864,-7.5E-02)); +#463309 = VECTOR('',#463310,1.); +#463310 = DIRECTION('',(-1.,0.,0.)); +#463311 = ORIENTED_EDGE('',*,*,#463312,.T.); +#463312 = EDGE_CURVE('',#463305,#463313,#463315,.T.); +#463313 = VERTEX_POINT('',#463314); +#463314 = CARTESIAN_POINT('',(136.636862,-138.155954,-7.5E-02)); +#463315 = LINE('',#463316,#463317); +#463316 = CARTESIAN_POINT('',(136.636862,-137.867864,-7.5E-02)); +#463317 = VECTOR('',#463318,1.); +#463318 = DIRECTION('',(0.,-1.,0.)); +#463319 = ORIENTED_EDGE('',*,*,#463320,.T.); +#463320 = EDGE_CURVE('',#463313,#463321,#463323,.T.); +#463321 = VERTEX_POINT('',#463322); +#463322 = CARTESIAN_POINT('',(136.348771,-138.155954,-7.5E-02)); +#463323 = LINE('',#463324,#463325); +#463324 = CARTESIAN_POINT('',(136.636862,-138.155954,-7.5E-02)); +#463325 = VECTOR('',#463326,1.); +#463326 = DIRECTION('',(-1.,0.,0.)); +#463327 = ORIENTED_EDGE('',*,*,#463328,.T.); +#463328 = EDGE_CURVE('',#463321,#463329,#463331,.T.); +#463329 = VERTEX_POINT('',#463330); +#463330 = CARTESIAN_POINT('',(136.348771,-137.867864,-7.5E-02)); +#463331 = LINE('',#463332,#463333); +#463332 = CARTESIAN_POINT('',(136.348771,-138.155954,-7.5E-02)); +#463333 = VECTOR('',#463334,1.); +#463334 = DIRECTION('',(0.,1.,0.)); +#463335 = ORIENTED_EDGE('',*,*,#463336,.T.); +#463336 = EDGE_CURVE('',#463329,#463337,#463339,.T.); +#463337 = VERTEX_POINT('',#463338); +#463338 = CARTESIAN_POINT('',(135.77259,-137.867864,-7.5E-02)); +#463339 = LINE('',#463340,#463341); +#463340 = CARTESIAN_POINT('',(136.348771,-137.867864,-7.5E-02)); +#463341 = VECTOR('',#463342,1.); +#463342 = DIRECTION('',(-1.,0.,0.)); +#463343 = ORIENTED_EDGE('',*,*,#463344,.T.); +#463344 = EDGE_CURVE('',#463337,#463345,#463347,.T.); +#463345 = VERTEX_POINT('',#463346); +#463346 = CARTESIAN_POINT('',(135.77259,-138.155954,-7.5E-02)); +#463347 = LINE('',#463348,#463349); +#463348 = CARTESIAN_POINT('',(135.77259,-137.867864,-7.5E-02)); +#463349 = VECTOR('',#463350,1.); +#463350 = DIRECTION('',(0.,-1.,0.)); +#463351 = ORIENTED_EDGE('',*,*,#463352,.T.); +#463352 = EDGE_CURVE('',#463345,#463353,#463355,.T.); +#463353 = VERTEX_POINT('',#463354); +#463354 = CARTESIAN_POINT('',(135.484499,-138.155954,-7.5E-02)); +#463355 = LINE('',#463356,#463357); +#463356 = CARTESIAN_POINT('',(135.77259,-138.155954,-7.5E-02)); +#463357 = VECTOR('',#463358,1.); +#463358 = DIRECTION('',(-1.,0.,0.)); +#463359 = ORIENTED_EDGE('',*,*,#463360,.T.); +#463360 = EDGE_CURVE('',#463353,#463361,#463363,.T.); +#463361 = VERTEX_POINT('',#463362); +#463362 = CARTESIAN_POINT('',(135.484499,-137.867864,-7.5E-02)); +#463363 = LINE('',#463364,#463365); +#463364 = CARTESIAN_POINT('',(135.484499,-138.155954,-7.5E-02)); +#463365 = VECTOR('',#463366,1.); +#463366 = DIRECTION('',(0.,1.,0.)); +#463367 = ORIENTED_EDGE('',*,*,#463368,.T.); +#463368 = EDGE_CURVE('',#463361,#463369,#463371,.T.); +#463369 = VERTEX_POINT('',#463370); +#463370 = CARTESIAN_POINT('',(135.196408,-137.867864,-7.5E-02)); +#463371 = LINE('',#463372,#463373); +#463372 = CARTESIAN_POINT('',(135.484499,-137.867864,-7.5E-02)); +#463373 = VECTOR('',#463374,1.); +#463374 = DIRECTION('',(-1.,0.,0.)); +#463375 = ORIENTED_EDGE('',*,*,#463376,.T.); +#463376 = EDGE_CURVE('',#463369,#463377,#463379,.T.); +#463377 = VERTEX_POINT('',#463378); +#463378 = CARTESIAN_POINT('',(135.196408,-137.291682,-7.5E-02)); +#463379 = LINE('',#463380,#463381); +#463380 = CARTESIAN_POINT('',(135.196408,-137.867864,-7.5E-02)); +#463381 = VECTOR('',#463382,1.); +#463382 = DIRECTION('',(0.,1.,0.)); +#463383 = ORIENTED_EDGE('',*,*,#463384,.T.); +#463384 = EDGE_CURVE('',#463377,#463385,#463387,.T.); +#463385 = VERTEX_POINT('',#463386); +#463386 = CARTESIAN_POINT('',(135.484499,-137.291682,-7.5E-02)); +#463387 = LINE('',#463388,#463389); +#463388 = CARTESIAN_POINT('',(135.196408,-137.291682,-7.5E-02)); +#463389 = VECTOR('',#463390,1.); +#463390 = DIRECTION('',(1.,0.,0.)); +#463391 = ORIENTED_EDGE('',*,*,#463392,.T.); +#463392 = EDGE_CURVE('',#463385,#463393,#463395,.T.); +#463393 = VERTEX_POINT('',#463394); +#463394 = CARTESIAN_POINT('',(135.484499,-137.579773,-7.5E-02)); +#463395 = LINE('',#463396,#463397); +#463396 = CARTESIAN_POINT('',(135.484499,-137.291682,-7.5E-02)); +#463397 = VECTOR('',#463398,1.); +#463398 = DIRECTION('',(0.,-1.,0.)); +#463399 = ORIENTED_EDGE('',*,*,#463400,.T.); +#463400 = EDGE_CURVE('',#463393,#463401,#463403,.T.); +#463401 = VERTEX_POINT('',#463402); +#463402 = CARTESIAN_POINT('',(135.77259,-137.579773,-7.5E-02)); +#463403 = LINE('',#463404,#463405); +#463404 = CARTESIAN_POINT('',(135.484499,-137.579773,-7.5E-02)); +#463405 = VECTOR('',#463406,1.); +#463406 = DIRECTION('',(1.,0.,0.)); +#463407 = ORIENTED_EDGE('',*,*,#463408,.T.); +#463408 = EDGE_CURVE('',#463401,#463409,#463411,.T.); +#463409 = VERTEX_POINT('',#463410); +#463410 = CARTESIAN_POINT('',(135.77259,-137.291682,-7.5E-02)); +#463411 = LINE('',#463412,#463413); +#463412 = CARTESIAN_POINT('',(135.77259,-137.579773,-7.5E-02)); +#463413 = VECTOR('',#463414,1.); +#463414 = DIRECTION('',(0.,1.,0.)); +#463415 = ORIENTED_EDGE('',*,*,#463416,.T.); +#463416 = EDGE_CURVE('',#463409,#463417,#463419,.T.); +#463417 = VERTEX_POINT('',#463418); +#463418 = CARTESIAN_POINT('',(136.060681,-137.291682,-7.5E-02)); +#463419 = LINE('',#463420,#463421); +#463420 = CARTESIAN_POINT('',(135.77259,-137.291682,-7.5E-02)); +#463421 = VECTOR('',#463422,1.); +#463422 = DIRECTION('',(1.,0.,0.)); +#463423 = ORIENTED_EDGE('',*,*,#463424,.T.); +#463424 = EDGE_CURVE('',#463417,#463425,#463427,.T.); +#463425 = VERTEX_POINT('',#463426); +#463426 = CARTESIAN_POINT('',(136.060681,-137.579773,-7.5E-02)); +#463427 = LINE('',#463428,#463429); +#463428 = CARTESIAN_POINT('',(136.060681,-137.291682,-7.5E-02)); +#463429 = VECTOR('',#463430,1.); +#463430 = DIRECTION('',(0.,-1.,0.)); +#463431 = ORIENTED_EDGE('',*,*,#463432,.T.); +#463432 = EDGE_CURVE('',#463425,#463433,#463435,.T.); +#463433 = VERTEX_POINT('',#463434); +#463434 = CARTESIAN_POINT('',(136.348771,-137.579773,-7.5E-02)); +#463435 = LINE('',#463436,#463437); +#463436 = CARTESIAN_POINT('',(136.060681,-137.579773,-7.5E-02)); +#463437 = VECTOR('',#463438,1.); +#463438 = DIRECTION('',(1.,0.,0.)); +#463439 = ORIENTED_EDGE('',*,*,#463440,.T.); +#463440 = EDGE_CURVE('',#463433,#462469,#463441,.T.); +#463441 = LINE('',#463442,#463443); +#463442 = CARTESIAN_POINT('',(136.348771,-137.579773,-7.5E-02)); +#463443 = VECTOR('',#463444,1.); +#463444 = DIRECTION('',(0.,1.,0.)); +#463445 = ORIENTED_EDGE('',*,*,#463446,.T.); +#463446 = EDGE_CURVE('',#462469,#463417,#463447,.T.); +#463447 = LINE('',#463448,#463449); +#463448 = CARTESIAN_POINT('',(136.348771,-137.291682,-7.5E-02)); +#463449 = VECTOR('',#463450,1.); +#463450 = DIRECTION('',(-1.,0.,0.)); +#463451 = ORIENTED_EDGE('',*,*,#463452,.T.); +#463452 = EDGE_CURVE('',#463417,#463453,#463455,.T.); +#463453 = VERTEX_POINT('',#463454); +#463454 = CARTESIAN_POINT('',(136.060681,-137.003592,-7.5E-02)); +#463455 = LINE('',#463456,#463457); +#463456 = CARTESIAN_POINT('',(136.060681,-137.291682,-7.5E-02)); +#463457 = VECTOR('',#463458,1.); +#463458 = DIRECTION('',(0.,1.,0.)); +#463459 = ORIENTED_EDGE('',*,*,#463460,.T.); +#463460 = EDGE_CURVE('',#463453,#463461,#463463,.T.); +#463461 = VERTEX_POINT('',#463462); +#463462 = CARTESIAN_POINT('',(135.484499,-137.003592,-7.5E-02)); +#463463 = LINE('',#463464,#463465); +#463464 = CARTESIAN_POINT('',(136.060681,-137.003592,-7.5E-02)); +#463465 = VECTOR('',#463466,1.); +#463466 = DIRECTION('',(-1.,0.,0.)); +#463467 = ORIENTED_EDGE('',*,*,#463468,.T.); +#463468 = EDGE_CURVE('',#463461,#463469,#463471,.T.); +#463469 = VERTEX_POINT('',#463470); +#463470 = CARTESIAN_POINT('',(135.484499,-136.715501,-7.5E-02)); +#463471 = LINE('',#463472,#463473); +#463472 = CARTESIAN_POINT('',(135.484499,-137.003592,-7.5E-02)); +#463473 = VECTOR('',#463474,1.); +#463474 = DIRECTION('',(0.,1.,0.)); +#463475 = ORIENTED_EDGE('',*,*,#463476,.T.); +#463476 = EDGE_CURVE('',#463469,#463477,#463479,.T.); +#463477 = VERTEX_POINT('',#463478); +#463478 = CARTESIAN_POINT('',(135.196408,-136.715501,-7.5E-02)); +#463479 = LINE('',#463480,#463481); +#463480 = CARTESIAN_POINT('',(135.484499,-136.715501,-7.5E-02)); +#463481 = VECTOR('',#463482,1.); +#463482 = DIRECTION('',(-1.,0.,0.)); +#463483 = ORIENTED_EDGE('',*,*,#463484,.T.); +#463484 = EDGE_CURVE('',#463477,#463485,#463487,.T.); +#463485 = VERTEX_POINT('',#463486); +#463486 = CARTESIAN_POINT('',(135.196408,-136.139319,-7.5E-02)); +#463487 = LINE('',#463488,#463489); +#463488 = CARTESIAN_POINT('',(135.196408,-136.715501,-7.5E-02)); +#463489 = VECTOR('',#463490,1.); +#463490 = DIRECTION('',(0.,1.,0.)); +#463491 = ORIENTED_EDGE('',*,*,#463492,.T.); +#463492 = EDGE_CURVE('',#463485,#463493,#463495,.T.); +#463493 = VERTEX_POINT('',#463494); +#463494 = CARTESIAN_POINT('',(134.908318,-136.139319,-7.5E-02)); +#463495 = LINE('',#463496,#463497); +#463496 = CARTESIAN_POINT('',(135.196408,-136.139319,-7.5E-02)); +#463497 = VECTOR('',#463498,1.); +#463498 = DIRECTION('',(-1.,0.,0.)); +#463499 = ORIENTED_EDGE('',*,*,#463500,.T.); +#463500 = EDGE_CURVE('',#463493,#463501,#463503,.T.); +#463501 = VERTEX_POINT('',#463502); +#463502 = CARTESIAN_POINT('',(134.908318,-135.851229,-7.5E-02)); +#463503 = LINE('',#463504,#463505); +#463504 = CARTESIAN_POINT('',(134.908318,-136.139319,-7.5E-02)); +#463505 = VECTOR('',#463506,1.); +#463506 = DIRECTION('',(0.,1.,0.)); +#463507 = ORIENTED_EDGE('',*,*,#463508,.T.); +#463508 = EDGE_CURVE('',#463501,#463509,#463511,.T.); +#463509 = VERTEX_POINT('',#463510); +#463510 = CARTESIAN_POINT('',(134.620227,-135.851229,-7.5E-02)); +#463511 = LINE('',#463512,#463513); +#463512 = CARTESIAN_POINT('',(134.908318,-135.851229,-7.5E-02)); +#463513 = VECTOR('',#463514,1.); +#463514 = DIRECTION('',(-1.,0.,0.)); +#463515 = ORIENTED_EDGE('',*,*,#463516,.T.); +#463516 = EDGE_CURVE('',#463509,#463517,#463519,.T.); +#463517 = VERTEX_POINT('',#463518); +#463518 = CARTESIAN_POINT('',(134.620227,-134.986956,-7.5E-02)); +#463519 = LINE('',#463520,#463521); +#463520 = CARTESIAN_POINT('',(134.620227,-135.851229,-7.5E-02)); +#463521 = VECTOR('',#463522,1.); +#463522 = DIRECTION('',(0.,1.,0.)); +#463523 = ORIENTED_EDGE('',*,*,#463524,.T.); +#463524 = EDGE_CURVE('',#463517,#463525,#463527,.T.); +#463525 = VERTEX_POINT('',#463526); +#463526 = CARTESIAN_POINT('',(134.332136,-134.986956,-7.5E-02)); +#463527 = LINE('',#463528,#463529); +#463528 = CARTESIAN_POINT('',(134.620227,-134.986956,-7.5E-02)); +#463529 = VECTOR('',#463530,1.); +#463530 = DIRECTION('',(-1.,0.,0.)); +#463531 = ORIENTED_EDGE('',*,*,#463532,.T.); +#463532 = EDGE_CURVE('',#463525,#463533,#463535,.T.); +#463533 = VERTEX_POINT('',#463534); +#463534 = CARTESIAN_POINT('',(134.332136,-134.698866,-7.5E-02)); +#463535 = LINE('',#463536,#463537); +#463536 = CARTESIAN_POINT('',(134.332136,-134.986956,-7.5E-02)); +#463537 = VECTOR('',#463538,1.); +#463538 = DIRECTION('',(0.,1.,0.)); +#463539 = ORIENTED_EDGE('',*,*,#463540,.T.); +#463540 = EDGE_CURVE('',#463533,#463541,#463543,.T.); +#463541 = VERTEX_POINT('',#463542); +#463542 = CARTESIAN_POINT('',(134.620227,-134.698866,-7.5E-02)); +#463543 = LINE('',#463544,#463545); +#463544 = CARTESIAN_POINT('',(134.332136,-134.698866,-7.5E-02)); +#463545 = VECTOR('',#463546,1.); +#463546 = DIRECTION('',(1.,0.,0.)); +#463547 = ORIENTED_EDGE('',*,*,#463548,.T.); +#463548 = EDGE_CURVE('',#463541,#463517,#463549,.T.); +#463549 = LINE('',#463550,#463551); +#463550 = CARTESIAN_POINT('',(134.620227,-134.698866,-7.5E-02)); +#463551 = VECTOR('',#463552,1.); +#463552 = DIRECTION('',(0.,-1.,0.)); +#463553 = ORIENTED_EDGE('',*,*,#463554,.T.); +#463554 = EDGE_CURVE('',#463517,#463555,#463557,.T.); +#463555 = VERTEX_POINT('',#463556); +#463556 = CARTESIAN_POINT('',(134.908318,-134.986956,-7.5E-02)); +#463557 = LINE('',#463558,#463559); +#463558 = CARTESIAN_POINT('',(134.620227,-134.986956,-7.5E-02)); +#463559 = VECTOR('',#463560,1.); +#463560 = DIRECTION('',(1.,0.,0.)); +#463561 = ORIENTED_EDGE('',*,*,#463562,.T.); +#463562 = EDGE_CURVE('',#463555,#463563,#463565,.T.); +#463563 = VERTEX_POINT('',#463564); +#463564 = CARTESIAN_POINT('',(134.908318,-134.410775,-7.5E-02)); +#463565 = LINE('',#463566,#463567); +#463566 = CARTESIAN_POINT('',(134.908318,-134.986956,-7.5E-02)); +#463567 = VECTOR('',#463568,1.); +#463568 = DIRECTION('',(0.,1.,0.)); +#463569 = ORIENTED_EDGE('',*,*,#463570,.T.); +#463570 = EDGE_CURVE('',#463563,#463571,#463573,.T.); +#463571 = VERTEX_POINT('',#463572); +#463572 = CARTESIAN_POINT('',(134.332136,-134.410775,-7.5E-02)); +#463573 = LINE('',#463574,#463575); +#463574 = CARTESIAN_POINT('',(134.908318,-134.410775,-7.5E-02)); +#463575 = VECTOR('',#463576,1.); +#463576 = DIRECTION('',(-1.,0.,0.)); +#463577 = ORIENTED_EDGE('',*,*,#463578,.T.); +#463578 = EDGE_CURVE('',#463571,#463579,#463581,.T.); +#463579 = VERTEX_POINT('',#463580); +#463580 = CARTESIAN_POINT('',(134.332136,-134.122684,-7.5E-02)); +#463581 = LINE('',#463582,#463583); +#463582 = CARTESIAN_POINT('',(134.332136,-134.410775,-7.5E-02)); +#463583 = VECTOR('',#463584,1.); +#463584 = DIRECTION('',(0.,1.,0.)); +#463585 = ORIENTED_EDGE('',*,*,#463586,.T.); +#463586 = EDGE_CURVE('',#463579,#463587,#463589,.T.); +#463587 = VERTEX_POINT('',#463588); +#463588 = CARTESIAN_POINT('',(134.908318,-134.122684,-7.5E-02)); +#463589 = LINE('',#463590,#463591); +#463590 = CARTESIAN_POINT('',(134.332136,-134.122684,-7.5E-02)); +#463591 = VECTOR('',#463592,1.); +#463592 = DIRECTION('',(1.,0.,0.)); +#463593 = ORIENTED_EDGE('',*,*,#463594,.T.); +#463594 = EDGE_CURVE('',#463587,#463595,#463597,.T.); +#463595 = VERTEX_POINT('',#463596); +#463596 = CARTESIAN_POINT('',(134.908318,-133.834593,-7.5E-02)); +#463597 = LINE('',#463598,#463599); +#463598 = CARTESIAN_POINT('',(134.908318,-134.122684,-7.5E-02)); +#463599 = VECTOR('',#463600,1.); +#463600 = DIRECTION('',(0.,1.,0.)); +#463601 = ORIENTED_EDGE('',*,*,#463602,.T.); +#463602 = EDGE_CURVE('',#463595,#463603,#463605,.T.); +#463603 = VERTEX_POINT('',#463604); +#463604 = CARTESIAN_POINT('',(135.196408,-133.834593,-7.5E-02)); +#463605 = LINE('',#463606,#463607); +#463606 = CARTESIAN_POINT('',(134.908318,-133.834593,-7.5E-02)); +#463607 = VECTOR('',#463608,1.); +#463608 = DIRECTION('',(1.,0.,0.)); +#463609 = ORIENTED_EDGE('',*,*,#463610,.T.); +#463610 = EDGE_CURVE('',#463603,#463611,#463613,.T.); +#463611 = VERTEX_POINT('',#463612); +#463612 = CARTESIAN_POINT('',(135.196408,-134.410775,-7.5E-02)); +#463613 = LINE('',#463614,#463615); +#463614 = CARTESIAN_POINT('',(135.196408,-133.834593,-7.5E-02)); +#463615 = VECTOR('',#463616,1.); +#463616 = DIRECTION('',(0.,-1.,0.)); +#463617 = ORIENTED_EDGE('',*,*,#463618,.T.); +#463618 = EDGE_CURVE('',#463611,#463619,#463621,.T.); +#463619 = VERTEX_POINT('',#463620); +#463620 = CARTESIAN_POINT('',(135.484499,-134.410775,-7.5E-02)); +#463621 = LINE('',#463622,#463623); +#463622 = CARTESIAN_POINT('',(135.196408,-134.410775,-7.5E-02)); +#463623 = VECTOR('',#463624,1.); +#463624 = DIRECTION('',(1.,0.,0.)); +#463625 = ORIENTED_EDGE('',*,*,#463626,.T.); +#463626 = EDGE_CURVE('',#463619,#463627,#463629,.T.); +#463627 = VERTEX_POINT('',#463628); +#463628 = CARTESIAN_POINT('',(135.484499,-133.834593,-7.5E-02)); +#463629 = LINE('',#463630,#463631); +#463630 = CARTESIAN_POINT('',(135.484499,-134.410775,-7.5E-02)); +#463631 = VECTOR('',#463632,1.); +#463632 = DIRECTION('',(0.,1.,0.)); +#463633 = ORIENTED_EDGE('',*,*,#463634,.T.); +#463634 = EDGE_CURVE('',#463627,#463635,#463637,.T.); +#463635 = VERTEX_POINT('',#463636); +#463636 = CARTESIAN_POINT('',(135.77259,-133.834593,-7.5E-02)); +#463637 = LINE('',#463638,#463639); +#463638 = CARTESIAN_POINT('',(135.484499,-133.834593,-7.5E-02)); +#463639 = VECTOR('',#463640,1.); +#463640 = DIRECTION('',(1.,0.,0.)); +#463641 = ORIENTED_EDGE('',*,*,#463642,.T.); +#463642 = EDGE_CURVE('',#463635,#463643,#463645,.T.); +#463643 = VERTEX_POINT('',#463644); +#463644 = CARTESIAN_POINT('',(135.77259,-134.122684,-7.5E-02)); +#463645 = LINE('',#463646,#463647); +#463646 = CARTESIAN_POINT('',(135.77259,-133.834593,-7.5E-02)); +#463647 = VECTOR('',#463648,1.); +#463648 = DIRECTION('',(0.,-1.,0.)); +#463649 = ORIENTED_EDGE('',*,*,#463650,.T.); +#463650 = EDGE_CURVE('',#463643,#463651,#463653,.T.); +#463651 = VERTEX_POINT('',#463652); +#463652 = CARTESIAN_POINT('',(136.348771,-134.122684,-7.5E-02)); +#463653 = LINE('',#463654,#463655); +#463654 = CARTESIAN_POINT('',(135.77259,-134.122684,-7.5E-02)); +#463655 = VECTOR('',#463656,1.); +#463656 = DIRECTION('',(1.,0.,0.)); +#463657 = ORIENTED_EDGE('',*,*,#463658,.T.); +#463658 = EDGE_CURVE('',#463651,#463659,#463661,.T.); +#463659 = VERTEX_POINT('',#463660); +#463660 = CARTESIAN_POINT('',(136.348771,-133.834593,-7.5E-02)); +#463661 = LINE('',#463662,#463663); +#463662 = CARTESIAN_POINT('',(136.348771,-134.122684,-7.5E-02)); +#463663 = VECTOR('',#463664,1.); +#463664 = DIRECTION('',(0.,1.,0.)); +#463665 = ORIENTED_EDGE('',*,*,#463666,.T.); +#463666 = EDGE_CURVE('',#463659,#463667,#463669,.T.); +#463667 = VERTEX_POINT('',#463668); +#463668 = CARTESIAN_POINT('',(136.636862,-133.834593,-7.5E-02)); +#463669 = LINE('',#463670,#463671); +#463670 = CARTESIAN_POINT('',(136.348771,-133.834593,-7.5E-02)); +#463671 = VECTOR('',#463672,1.); +#463672 = DIRECTION('',(1.,0.,0.)); +#463673 = ORIENTED_EDGE('',*,*,#463674,.T.); +#463674 = EDGE_CURVE('',#463667,#463675,#463677,.T.); +#463675 = VERTEX_POINT('',#463676); +#463676 = CARTESIAN_POINT('',(136.636862,-133.546503,-7.5E-02)); +#463677 = LINE('',#463678,#463679); +#463678 = CARTESIAN_POINT('',(136.636862,-133.834593,-7.5E-02)); +#463679 = VECTOR('',#463680,1.); +#463680 = DIRECTION('',(0.,1.,0.)); +#463681 = ORIENTED_EDGE('',*,*,#463682,.T.); +#463682 = EDGE_CURVE('',#463675,#462325,#463683,.T.); +#463683 = LINE('',#463684,#463685); +#463684 = CARTESIAN_POINT('',(136.636862,-133.546503,-7.5E-02)); +#463685 = VECTOR('',#463686,1.); +#463686 = DIRECTION('',(-1.,0.,0.)); +#463687 = FACE_BOUND('',#463688,.T.); +#463688 = EDGE_LOOP('',(#463689,#463699,#463707,#463715)); +#463689 = ORIENTED_EDGE('',*,*,#463690,.T.); +#463690 = EDGE_CURVE('',#463691,#463693,#463695,.T.); +#463691 = VERTEX_POINT('',#463692); +#463692 = CARTESIAN_POINT('',(138.077316,-138.732136,-7.5E-02)); +#463693 = VERTEX_POINT('',#463694); +#463694 = CARTESIAN_POINT('',(138.077316,-138.444045,-7.5E-02)); +#463695 = LINE('',#463696,#463697); +#463696 = CARTESIAN_POINT('',(138.077316,-138.732136,-7.5E-02)); +#463697 = VECTOR('',#463698,1.); +#463698 = DIRECTION('',(0.,1.,0.)); +#463699 = ORIENTED_EDGE('',*,*,#463700,.T.); +#463700 = EDGE_CURVE('',#463693,#463701,#463703,.T.); +#463701 = VERTEX_POINT('',#463702); +#463702 = CARTESIAN_POINT('',(137.789225,-138.444045,-7.5E-02)); +#463703 = LINE('',#463704,#463705); +#463704 = CARTESIAN_POINT('',(138.077316,-138.444045,-7.5E-02)); +#463705 = VECTOR('',#463706,1.); +#463706 = DIRECTION('',(-1.,0.,0.)); +#463707 = ORIENTED_EDGE('',*,*,#463708,.T.); +#463708 = EDGE_CURVE('',#463701,#463709,#463711,.T.); +#463709 = VERTEX_POINT('',#463710); +#463710 = CARTESIAN_POINT('',(137.789225,-138.732136,-7.5E-02)); +#463711 = LINE('',#463712,#463713); +#463712 = CARTESIAN_POINT('',(137.789225,-138.444045,-7.5E-02)); +#463713 = VECTOR('',#463714,1.); +#463714 = DIRECTION('',(0.,-1.,0.)); +#463715 = ORIENTED_EDGE('',*,*,#463716,.T.); +#463716 = EDGE_CURVE('',#463709,#463691,#463717,.T.); +#463717 = LINE('',#463718,#463719); +#463718 = CARTESIAN_POINT('',(137.789225,-138.732136,-7.5E-02)); +#463719 = VECTOR('',#463720,1.); +#463720 = DIRECTION('',(1.,0.,0.)); +#463721 = FACE_BOUND('',#463722,.T.); +#463722 = EDGE_LOOP('',(#463723,#463733,#463741,#463749)); +#463723 = ORIENTED_EDGE('',*,*,#463724,.T.); +#463724 = EDGE_CURVE('',#463725,#463727,#463729,.T.); +#463725 = VERTEX_POINT('',#463726); +#463726 = CARTESIAN_POINT('',(138.653497,-138.444045,-7.5E-02)); +#463727 = VERTEX_POINT('',#463728); +#463728 = CARTESIAN_POINT('',(138.653497,-138.155954,-7.5E-02)); +#463729 = LINE('',#463730,#463731); +#463730 = CARTESIAN_POINT('',(138.653497,-138.444045,-7.5E-02)); +#463731 = VECTOR('',#463732,1.); +#463732 = DIRECTION('',(0.,1.,0.)); +#463733 = ORIENTED_EDGE('',*,*,#463734,.T.); +#463734 = EDGE_CURVE('',#463727,#463735,#463737,.T.); +#463735 = VERTEX_POINT('',#463736); +#463736 = CARTESIAN_POINT('',(138.077316,-138.155954,-7.5E-02)); +#463737 = LINE('',#463738,#463739); +#463738 = CARTESIAN_POINT('',(138.653497,-138.155954,-7.5E-02)); +#463739 = VECTOR('',#463740,1.); +#463740 = DIRECTION('',(-1.,0.,0.)); +#463741 = ORIENTED_EDGE('',*,*,#463742,.T.); +#463742 = EDGE_CURVE('',#463735,#463743,#463745,.T.); +#463743 = VERTEX_POINT('',#463744); +#463744 = CARTESIAN_POINT('',(138.077316,-138.444045,-7.5E-02)); +#463745 = LINE('',#463746,#463747); +#463746 = CARTESIAN_POINT('',(138.077316,-138.155954,-7.5E-02)); +#463747 = VECTOR('',#463748,1.); +#463748 = DIRECTION('',(0.,-1.,0.)); +#463749 = ORIENTED_EDGE('',*,*,#463750,.T.); +#463750 = EDGE_CURVE('',#463743,#463725,#463751,.T.); +#463751 = LINE('',#463752,#463753); +#463752 = CARTESIAN_POINT('',(138.077316,-138.444045,-7.5E-02)); +#463753 = VECTOR('',#463754,1.); +#463754 = DIRECTION('',(1.,0.,0.)); +#463755 = FACE_BOUND('',#463756,.T.); +#463756 = EDGE_LOOP('',(#463757,#463767,#463775,#463783)); +#463757 = ORIENTED_EDGE('',*,*,#463758,.T.); +#463758 = EDGE_CURVE('',#463759,#463761,#463763,.T.); +#463759 = VERTEX_POINT('',#463760); +#463760 = CARTESIAN_POINT('',(137.501134,-137.579773,-7.5E-02)); +#463761 = VERTEX_POINT('',#463762); +#463762 = CARTESIAN_POINT('',(137.501134,-137.291682,-7.5E-02)); +#463763 = LINE('',#463764,#463765); +#463764 = CARTESIAN_POINT('',(137.501134,-137.579773,-7.5E-02)); +#463765 = VECTOR('',#463766,1.); +#463766 = DIRECTION('',(0.,1.,0.)); +#463767 = ORIENTED_EDGE('',*,*,#463768,.T.); +#463768 = EDGE_CURVE('',#463761,#463769,#463771,.T.); +#463769 = VERTEX_POINT('',#463770); +#463770 = CARTESIAN_POINT('',(136.924953,-137.291682,-7.5E-02)); +#463771 = LINE('',#463772,#463773); +#463772 = CARTESIAN_POINT('',(137.501134,-137.291682,-7.5E-02)); +#463773 = VECTOR('',#463774,1.); +#463774 = DIRECTION('',(-1.,0.,0.)); +#463775 = ORIENTED_EDGE('',*,*,#463776,.T.); +#463776 = EDGE_CURVE('',#463769,#463777,#463779,.T.); +#463777 = VERTEX_POINT('',#463778); +#463778 = CARTESIAN_POINT('',(136.924953,-137.579773,-7.5E-02)); +#463779 = LINE('',#463780,#463781); +#463780 = CARTESIAN_POINT('',(136.924953,-137.291682,-7.5E-02)); +#463781 = VECTOR('',#463782,1.); +#463782 = DIRECTION('',(0.,-1.,0.)); +#463783 = ORIENTED_EDGE('',*,*,#463784,.T.); +#463784 = EDGE_CURVE('',#463777,#463759,#463785,.T.); +#463785 = LINE('',#463786,#463787); +#463786 = CARTESIAN_POINT('',(136.924953,-137.579773,-7.5E-02)); +#463787 = VECTOR('',#463788,1.); +#463788 = DIRECTION('',(1.,0.,0.)); +#463789 = FACE_BOUND('',#463790,.T.); +#463790 = EDGE_LOOP('',(#463791,#463801,#463809,#463817)); +#463791 = ORIENTED_EDGE('',*,*,#463792,.T.); +#463792 = EDGE_CURVE('',#463793,#463795,#463797,.T.); +#463793 = VERTEX_POINT('',#463794); +#463794 = CARTESIAN_POINT('',(135.77259,-136.715501,-7.5E-02)); +#463795 = VERTEX_POINT('',#463796); +#463796 = CARTESIAN_POINT('',(135.77259,-136.42741,-7.5E-02)); +#463797 = LINE('',#463798,#463799); +#463798 = CARTESIAN_POINT('',(135.77259,-136.715501,-7.5E-02)); +#463799 = VECTOR('',#463800,1.); +#463800 = DIRECTION('',(0.,1.,0.)); +#463801 = ORIENTED_EDGE('',*,*,#463802,.T.); +#463802 = EDGE_CURVE('',#463795,#463803,#463805,.T.); +#463803 = VERTEX_POINT('',#463804); +#463804 = CARTESIAN_POINT('',(135.484499,-136.42741,-7.5E-02)); +#463805 = LINE('',#463806,#463807); +#463806 = CARTESIAN_POINT('',(135.77259,-136.42741,-7.5E-02)); +#463807 = VECTOR('',#463808,1.); +#463808 = DIRECTION('',(-1.,0.,0.)); +#463809 = ORIENTED_EDGE('',*,*,#463810,.T.); +#463810 = EDGE_CURVE('',#463803,#463811,#463813,.T.); +#463811 = VERTEX_POINT('',#463812); +#463812 = CARTESIAN_POINT('',(135.484499,-136.715501,-7.5E-02)); +#463813 = LINE('',#463814,#463815); +#463814 = CARTESIAN_POINT('',(135.484499,-136.42741,-7.5E-02)); +#463815 = VECTOR('',#463816,1.); +#463816 = DIRECTION('',(0.,-1.,0.)); +#463817 = ORIENTED_EDGE('',*,*,#463818,.T.); +#463818 = EDGE_CURVE('',#463811,#463793,#463819,.T.); +#463819 = LINE('',#463820,#463821); +#463820 = CARTESIAN_POINT('',(135.484499,-136.715501,-7.5E-02)); +#463821 = VECTOR('',#463822,1.); +#463822 = DIRECTION('',(1.,0.,0.)); +#463823 = FACE_BOUND('',#463824,.T.); +#463824 = EDGE_LOOP('',(#463825,#463835,#463843,#463851)); +#463825 = ORIENTED_EDGE('',*,*,#463826,.T.); +#463826 = EDGE_CURVE('',#463827,#463829,#463831,.T.); +#463827 = VERTEX_POINT('',#463828); +#463828 = CARTESIAN_POINT('',(136.060681,-136.42741,-7.5E-02)); +#463829 = VERTEX_POINT('',#463830); +#463830 = CARTESIAN_POINT('',(136.060681,-136.139319,-7.5E-02)); +#463831 = LINE('',#463832,#463833); +#463832 = CARTESIAN_POINT('',(136.060681,-136.42741,-7.5E-02)); +#463833 = VECTOR('',#463834,1.); +#463834 = DIRECTION('',(0.,1.,0.)); +#463835 = ORIENTED_EDGE('',*,*,#463836,.T.); +#463836 = EDGE_CURVE('',#463829,#463837,#463839,.T.); +#463837 = VERTEX_POINT('',#463838); +#463838 = CARTESIAN_POINT('',(135.77259,-136.139319,-7.5E-02)); +#463839 = LINE('',#463840,#463841); +#463840 = CARTESIAN_POINT('',(136.060681,-136.139319,-7.5E-02)); +#463841 = VECTOR('',#463842,1.); +#463842 = DIRECTION('',(-1.,0.,0.)); +#463843 = ORIENTED_EDGE('',*,*,#463844,.T.); +#463844 = EDGE_CURVE('',#463837,#463845,#463847,.T.); +#463845 = VERTEX_POINT('',#463846); +#463846 = CARTESIAN_POINT('',(135.77259,-136.42741,-7.5E-02)); +#463847 = LINE('',#463848,#463849); +#463848 = CARTESIAN_POINT('',(135.77259,-136.139319,-7.5E-02)); +#463849 = VECTOR('',#463850,1.); +#463850 = DIRECTION('',(0.,-1.,0.)); +#463851 = ORIENTED_EDGE('',*,*,#463852,.T.); +#463852 = EDGE_CURVE('',#463845,#463827,#463853,.T.); +#463853 = LINE('',#463854,#463855); +#463854 = CARTESIAN_POINT('',(135.77259,-136.42741,-7.5E-02)); +#463855 = VECTOR('',#463856,1.); +#463856 = DIRECTION('',(1.,0.,0.)); +#463857 = FACE_BOUND('',#463858,.T.); +#463858 = EDGE_LOOP('',(#463859,#463869,#463877,#463885)); +#463859 = ORIENTED_EDGE('',*,*,#463860,.T.); +#463860 = EDGE_CURVE('',#463861,#463863,#463865,.T.); +#463861 = VERTEX_POINT('',#463862); +#463862 = CARTESIAN_POINT('',(135.77259,-135.563138,-7.5E-02)); +#463863 = VERTEX_POINT('',#463864); +#463864 = CARTESIAN_POINT('',(135.77259,-135.275047,-7.5E-02)); +#463865 = LINE('',#463866,#463867); +#463866 = CARTESIAN_POINT('',(135.77259,-135.563138,-7.5E-02)); +#463867 = VECTOR('',#463868,1.); +#463868 = DIRECTION('',(0.,1.,0.)); +#463869 = ORIENTED_EDGE('',*,*,#463870,.T.); +#463870 = EDGE_CURVE('',#463863,#463871,#463873,.T.); +#463871 = VERTEX_POINT('',#463872); +#463872 = CARTESIAN_POINT('',(134.908318,-135.275047,-7.5E-02)); +#463873 = LINE('',#463874,#463875); +#463874 = CARTESIAN_POINT('',(135.77259,-135.275047,-7.5E-02)); +#463875 = VECTOR('',#463876,1.); +#463876 = DIRECTION('',(-1.,0.,0.)); +#463877 = ORIENTED_EDGE('',*,*,#463878,.T.); +#463878 = EDGE_CURVE('',#463871,#463879,#463881,.T.); +#463879 = VERTEX_POINT('',#463880); +#463880 = CARTESIAN_POINT('',(134.908318,-135.563138,-7.5E-02)); +#463881 = LINE('',#463882,#463883); +#463882 = CARTESIAN_POINT('',(134.908318,-135.275047,-7.5E-02)); +#463883 = VECTOR('',#463884,1.); +#463884 = DIRECTION('',(0.,-1.,0.)); +#463885 = ORIENTED_EDGE('',*,*,#463886,.T.); +#463886 = EDGE_CURVE('',#463879,#463861,#463887,.T.); +#463887 = LINE('',#463888,#463889); +#463888 = CARTESIAN_POINT('',(134.908318,-135.563138,-7.5E-02)); +#463889 = VECTOR('',#463890,1.); +#463890 = DIRECTION('',(1.,0.,0.)); +#463891 = FACE_BOUND('',#463892,.T.); +#463892 = EDGE_LOOP('',(#463893,#463903,#463911,#463919)); +#463893 = ORIENTED_EDGE('',*,*,#463894,.T.); +#463894 = EDGE_CURVE('',#463895,#463897,#463899,.T.); +#463895 = VERTEX_POINT('',#463896); +#463896 = CARTESIAN_POINT('',(135.484499,-134.986956,-7.5E-02)); +#463897 = VERTEX_POINT('',#463898); +#463898 = CARTESIAN_POINT('',(135.484499,-134.698866,-7.5E-02)); +#463899 = LINE('',#463900,#463901); +#463900 = CARTESIAN_POINT('',(135.484499,-134.986956,-7.5E-02)); +#463901 = VECTOR('',#463902,1.); +#463902 = DIRECTION('',(0.,1.,0.)); +#463903 = ORIENTED_EDGE('',*,*,#463904,.T.); +#463904 = EDGE_CURVE('',#463897,#463905,#463907,.T.); +#463905 = VERTEX_POINT('',#463906); +#463906 = CARTESIAN_POINT('',(135.196408,-134.698866,-7.5E-02)); +#463907 = LINE('',#463908,#463909); +#463908 = CARTESIAN_POINT('',(135.484499,-134.698866,-7.5E-02)); +#463909 = VECTOR('',#463910,1.); +#463910 = DIRECTION('',(-1.,0.,0.)); +#463911 = ORIENTED_EDGE('',*,*,#463912,.T.); +#463912 = EDGE_CURVE('',#463905,#463913,#463915,.T.); +#463913 = VERTEX_POINT('',#463914); +#463914 = CARTESIAN_POINT('',(135.196408,-134.986956,-7.5E-02)); +#463915 = LINE('',#463916,#463917); +#463916 = CARTESIAN_POINT('',(135.196408,-134.698866,-7.5E-02)); +#463917 = VECTOR('',#463918,1.); +#463918 = DIRECTION('',(0.,-1.,0.)); +#463919 = ORIENTED_EDGE('',*,*,#463920,.T.); +#463920 = EDGE_CURVE('',#463913,#463895,#463921,.T.); +#463921 = LINE('',#463922,#463923); +#463922 = CARTESIAN_POINT('',(135.196408,-134.986956,-7.5E-02)); +#463923 = VECTOR('',#463924,1.); +#463924 = DIRECTION('',(1.,0.,0.)); +#463925 = FACE_BOUND('',#463926,.T.); +#463926 = EDGE_LOOP('',(#463927,#463937,#463945,#463953)); +#463927 = ORIENTED_EDGE('',*,*,#463928,.T.); +#463928 = EDGE_CURVE('',#463929,#463931,#463933,.T.); +#463929 = VERTEX_POINT('',#463930); +#463930 = CARTESIAN_POINT('',(136.060681,-134.986956,-7.5E-02)); +#463931 = VERTEX_POINT('',#463932); +#463932 = CARTESIAN_POINT('',(136.060681,-134.698866,-7.5E-02)); +#463933 = LINE('',#463934,#463935); +#463934 = CARTESIAN_POINT('',(136.060681,-134.986956,-7.5E-02)); +#463935 = VECTOR('',#463936,1.); +#463936 = DIRECTION('',(0.,1.,0.)); +#463937 = ORIENTED_EDGE('',*,*,#463938,.T.); +#463938 = EDGE_CURVE('',#463931,#463939,#463941,.T.); +#463939 = VERTEX_POINT('',#463940); +#463940 = CARTESIAN_POINT('',(135.77259,-134.698866,-7.5E-02)); +#463941 = LINE('',#463942,#463943); +#463942 = CARTESIAN_POINT('',(136.060681,-134.698866,-7.5E-02)); +#463943 = VECTOR('',#463944,1.); +#463944 = DIRECTION('',(-1.,0.,0.)); +#463945 = ORIENTED_EDGE('',*,*,#463946,.T.); +#463946 = EDGE_CURVE('',#463939,#463947,#463949,.T.); +#463947 = VERTEX_POINT('',#463948); +#463948 = CARTESIAN_POINT('',(135.77259,-134.986956,-7.5E-02)); +#463949 = LINE('',#463950,#463951); +#463950 = CARTESIAN_POINT('',(135.77259,-134.698866,-7.5E-02)); +#463951 = VECTOR('',#463952,1.); +#463952 = DIRECTION('',(0.,-1.,0.)); +#463953 = ORIENTED_EDGE('',*,*,#463954,.T.); +#463954 = EDGE_CURVE('',#463947,#463929,#463955,.T.); +#463955 = LINE('',#463956,#463957); +#463956 = CARTESIAN_POINT('',(135.77259,-134.986956,-7.5E-02)); +#463957 = VECTOR('',#463958,1.); +#463958 = DIRECTION('',(1.,0.,0.)); +#463959 = FACE_BOUND('',#463960,.T.); +#463960 = EDGE_LOOP('',(#463961,#463971,#463979,#463987)); +#463961 = ORIENTED_EDGE('',*,*,#463962,.T.); +#463962 = EDGE_CURVE('',#463963,#463965,#463967,.T.); +#463963 = VERTEX_POINT('',#463964); +#463964 = CARTESIAN_POINT('',(136.636862,-134.986956,-7.5E-02)); +#463965 = VERTEX_POINT('',#463966); +#463966 = CARTESIAN_POINT('',(136.636862,-134.410775,-7.5E-02)); +#463967 = LINE('',#463968,#463969); +#463968 = CARTESIAN_POINT('',(136.636862,-134.986956,-7.5E-02)); +#463969 = VECTOR('',#463970,1.); +#463970 = DIRECTION('',(0.,1.,0.)); +#463971 = ORIENTED_EDGE('',*,*,#463972,.T.); +#463972 = EDGE_CURVE('',#463965,#463973,#463975,.T.); +#463973 = VERTEX_POINT('',#463974); +#463974 = CARTESIAN_POINT('',(136.348771,-134.410775,-7.5E-02)); +#463975 = LINE('',#463976,#463977); +#463976 = CARTESIAN_POINT('',(136.636862,-134.410775,-7.5E-02)); +#463977 = VECTOR('',#463978,1.); +#463978 = DIRECTION('',(-1.,0.,0.)); +#463979 = ORIENTED_EDGE('',*,*,#463980,.T.); +#463980 = EDGE_CURVE('',#463973,#463981,#463983,.T.); +#463981 = VERTEX_POINT('',#463982); +#463982 = CARTESIAN_POINT('',(136.348771,-134.986956,-7.5E-02)); +#463983 = LINE('',#463984,#463985); +#463984 = CARTESIAN_POINT('',(136.348771,-134.410775,-7.5E-02)); +#463985 = VECTOR('',#463986,1.); +#463986 = DIRECTION('',(0.,-1.,0.)); +#463987 = ORIENTED_EDGE('',*,*,#463988,.T.); +#463988 = EDGE_CURVE('',#463981,#463963,#463989,.T.); +#463989 = LINE('',#463990,#463991); +#463990 = CARTESIAN_POINT('',(136.348771,-134.986956,-7.5E-02)); +#463991 = VECTOR('',#463992,1.); +#463992 = DIRECTION('',(1.,0.,0.)); +#463993 = PLANE('',#463994); +#463994 = AXIS2_PLACEMENT_3D('',#463995,#463996,#463997); +#463995 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#463996 = DIRECTION('',(-0.,-0.,-1.)); +#463997 = DIRECTION('',(-1.,0.,0.)); +#463998 = SHELL_BASED_SURFACE_MODEL('',(#463999)); +#463999 = OPEN_SHELL('',(#464000)); +#464000 = ADVANCED_FACE('',(#464001),#464158,.T.); +#464001 = FACE_BOUND('',#464002,.T.); +#464002 = EDGE_LOOP('',(#464003,#464014,#464022,#464030,#464038,#464046, + #464054,#464062,#464070,#464078,#464087,#464095,#464104,#464112, + #464120,#464128,#464136,#464144,#464152)); +#464003 = ORIENTED_EDGE('',*,*,#464004,.T.); +#464004 = EDGE_CURVE('',#464005,#464007,#464009,.T.); +#464005 = VERTEX_POINT('',#464006); +#464006 = CARTESIAN_POINT('',(151.795808,-140.811031,-7.5E-02)); +#464007 = VERTEX_POINT('',#464008); +#464008 = CARTESIAN_POINT('',(151.795808,-140.711031,-7.5E-02)); +#464009 = CIRCLE('',#464010,5.000000000004E-02); +#464010 = AXIS2_PLACEMENT_3D('',#464011,#464012,#464013); +#464011 = CARTESIAN_POINT('',(151.79580804771,-140.761031,-7.5E-02)); +#464012 = DIRECTION('',(0.,0.,-1.)); +#464013 = DIRECTION('',(-9.54237293626E-07,-1.,-0.)); +#464014 = ORIENTED_EDGE('',*,*,#464015,.T.); +#464015 = EDGE_CURVE('',#464007,#464016,#464018,.T.); +#464016 = VERTEX_POINT('',#464017); +#464017 = CARTESIAN_POINT('',(152.322073,-140.711519,-7.5E-02)); +#464018 = LINE('',#464019,#464020); +#464019 = CARTESIAN_POINT('',(151.795808,-140.711031,-7.5E-02)); +#464020 = VECTOR('',#464021,1.); +#464021 = DIRECTION('',(0.999999570067,-9.272890847983E-04,0.)); +#464022 = ORIENTED_EDGE('',*,*,#464023,.T.); +#464023 = EDGE_CURVE('',#464016,#464024,#464026,.T.); +#464024 = VERTEX_POINT('',#464025); +#464025 = CARTESIAN_POINT('',(152.341977,-140.71631,-7.5E-02)); +#464026 = LINE('',#464027,#464028); +#464027 = CARTESIAN_POINT('',(152.322073,-140.711519,-7.5E-02)); +#464028 = VECTOR('',#464029,1.); +#464029 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#464030 = ORIENTED_EDGE('',*,*,#464031,.T.); +#464031 = EDGE_CURVE('',#464024,#464032,#464034,.T.); +#464032 = VERTEX_POINT('',#464033); +#464033 = CARTESIAN_POINT('',(152.449807,-140.7737,-7.5E-02)); +#464034 = LINE('',#464035,#464036); +#464035 = CARTESIAN_POINT('',(152.341977,-140.71631,-7.5E-02)); +#464036 = VECTOR('',#464037,1.); +#464037 = DIRECTION('',(0.882758259516,-0.469827473928,0.)); +#464038 = ORIENTED_EDGE('',*,*,#464039,.T.); +#464039 = EDGE_CURVE('',#464032,#464040,#464042,.T.); +#464040 = VERTEX_POINT('',#464041); +#464041 = CARTESIAN_POINT('',(152.508669,-140.884754,-7.5E-02)); +#464042 = LINE('',#464043,#464044); +#464043 = CARTESIAN_POINT('',(152.449807,-140.7737,-7.5E-02)); +#464044 = VECTOR('',#464045,1.); +#464045 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#464046 = ORIENTED_EDGE('',*,*,#464047,.T.); +#464047 = EDGE_CURVE('',#464040,#464048,#464050,.T.); +#464048 = VERTEX_POINT('',#464049); +#464049 = CARTESIAN_POINT('',(152.512475,-140.903888,-7.5E-02)); +#464050 = LINE('',#464051,#464052); +#464051 = CARTESIAN_POINT('',(152.508669,-140.884754,-7.5E-02)); +#464052 = VECTOR('',#464053,1.); +#464053 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#464054 = ORIENTED_EDGE('',*,*,#464055,.T.); +#464055 = EDGE_CURVE('',#464048,#464056,#464058,.T.); +#464056 = VERTEX_POINT('',#464057); +#464057 = CARTESIAN_POINT('',(152.510232,-141.058017,-7.5E-02)); +#464058 = LINE('',#464059,#464060); +#464059 = CARTESIAN_POINT('',(152.512475,-140.903888,-7.5E-02)); +#464060 = VECTOR('',#464061,1.); +#464061 = DIRECTION('',(-1.455120401594E-02,-0.999894125626,0.)); +#464062 = ORIENTED_EDGE('',*,*,#464063,.T.); +#464063 = EDGE_CURVE('',#464056,#464064,#464066,.T.); +#464064 = VERTEX_POINT('',#464065); +#464065 = CARTESIAN_POINT('',(152.471091,-141.141315,-7.5E-02)); +#464066 = LINE('',#464067,#464068); +#464067 = CARTESIAN_POINT('',(152.510232,-141.058017,-7.5E-02)); +#464068 = VECTOR('',#464069,1.); +#464069 = DIRECTION('',(-0.425280509062,-0.905061593822,0.)); +#464070 = ORIENTED_EDGE('',*,*,#464071,.T.); +#464071 = EDGE_CURVE('',#464064,#464072,#464074,.T.); +#464072 = VERTEX_POINT('',#464073); +#464073 = CARTESIAN_POINT('',(152.481609,-141.143408,-7.5E-02)); +#464074 = LINE('',#464075,#464076); +#464075 = CARTESIAN_POINT('',(152.471091,-141.141315,-7.5E-02)); +#464076 = VECTOR('',#464077,1.); +#464077 = DIRECTION('',(0.980770295219,-0.195165642508,0.)); +#464078 = ORIENTED_EDGE('',*,*,#464079,.T.); +#464079 = EDGE_CURVE('',#464072,#464080,#464082,.T.); +#464080 = VERTEX_POINT('',#464081); +#464081 = CARTESIAN_POINT('',(152.462475,-141.239602,-7.5E-02)); +#464082 = CIRCLE('',#464083,4.999998452109E-02); +#464083 = AXIS2_PLACEMENT_3D('',#464084,#464085,#464086); +#464084 = CARTESIAN_POINT('',(152.46247496263,-141.1896020154,-7.5E-02) + ); +#464085 = DIRECTION('',(0.,0.,-1.)); +#464086 = DIRECTION('',(0.382680865852,0.923880595592,0.)); +#464087 = ORIENTED_EDGE('',*,*,#464088,.T.); +#464088 = EDGE_CURVE('',#464080,#464089,#464091,.T.); +#464089 = VERTEX_POINT('',#464090); +#464090 = CARTESIAN_POINT('',(151.795808,-141.239602,-7.5E-02)); +#464091 = LINE('',#464092,#464093); +#464092 = CARTESIAN_POINT('',(152.462475,-141.239602,-7.5E-02)); +#464093 = VECTOR('',#464094,1.); +#464094 = DIRECTION('',(-1.,0.,0.)); +#464095 = ORIENTED_EDGE('',*,*,#464096,.T.); +#464096 = EDGE_CURVE('',#464089,#464097,#464099,.T.); +#464097 = VERTEX_POINT('',#464098); +#464098 = CARTESIAN_POINT('',(151.795808,-141.139602,-7.5E-02)); +#464099 = CIRCLE('',#464100,5.000000000002E-02); +#464100 = AXIS2_PLACEMENT_3D('',#464101,#464102,#464103); +#464101 = CARTESIAN_POINT('',(151.79580804771,-141.189602,-7.5E-02)); +#464102 = DIRECTION('',(0.,0.,-1.)); +#464103 = DIRECTION('',(-9.542367251923E-07,-1.,-0.)); +#464104 = ORIENTED_EDGE('',*,*,#464105,.T.); +#464105 = EDGE_CURVE('',#464097,#464106,#464108,.T.); +#464106 = VERTEX_POINT('',#464107); +#464107 = CARTESIAN_POINT('',(152.346525,-141.139602,-7.5E-02)); +#464108 = LINE('',#464109,#464110); +#464109 = CARTESIAN_POINT('',(151.795808,-141.139602,-7.5E-02)); +#464110 = VECTOR('',#464111,1.); +#464111 = DIRECTION('',(1.,0.,0.)); +#464112 = ORIENTED_EDGE('',*,*,#464113,.T.); +#464113 = EDGE_CURVE('',#464106,#464114,#464116,.T.); +#464114 = VERTEX_POINT('',#464115); +#464115 = CARTESIAN_POINT('',(152.373764,-141.112363,-7.5E-02)); +#464116 = LINE('',#464117,#464118); +#464117 = CARTESIAN_POINT('',(152.346525,-141.139602,-7.5E-02)); +#464118 = VECTOR('',#464119,1.); +#464119 = DIRECTION('',(0.707106781186,0.707106781187,0.)); +#464120 = ORIENTED_EDGE('',*,*,#464121,.T.); +#464121 = EDGE_CURVE('',#464114,#464122,#464124,.T.); +#464122 = VERTEX_POINT('',#464123); +#464123 = CARTESIAN_POINT('',(152.412475,-141.034941,-7.5E-02)); +#464124 = LINE('',#464125,#464126); +#464125 = CARTESIAN_POINT('',(152.373764,-141.112363,-7.5E-02)); +#464126 = VECTOR('',#464127,1.); +#464127 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#464128 = ORIENTED_EDGE('',*,*,#464129,.T.); +#464129 = EDGE_CURVE('',#464122,#464130,#464132,.T.); +#464130 = VERTEX_POINT('',#464131); +#464131 = CARTESIAN_POINT('',(152.412475,-140.915691,-7.5E-02)); +#464132 = LINE('',#464133,#464134); +#464133 = CARTESIAN_POINT('',(152.412475,-141.034941,-7.5E-02)); +#464134 = VECTOR('',#464135,1.); +#464135 = DIRECTION('',(0.,1.,0.)); +#464136 = ORIENTED_EDGE('',*,*,#464137,.T.); +#464137 = EDGE_CURVE('',#464130,#464138,#464140,.T.); +#464138 = VERTEX_POINT('',#464139); +#464139 = CARTESIAN_POINT('',(152.377588,-140.845917,-7.5E-02)); +#464140 = LINE('',#464141,#464142); +#464141 = CARTESIAN_POINT('',(152.412475,-140.915691,-7.5E-02)); +#464142 = VECTOR('',#464143,1.); +#464143 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#464144 = ORIENTED_EDGE('',*,*,#464145,.T.); +#464145 = EDGE_CURVE('',#464138,#464146,#464148,.T.); +#464146 = VERTEX_POINT('',#464147); +#464147 = CARTESIAN_POINT('',(152.307815,-140.811031,-7.5E-02)); +#464148 = LINE('',#464149,#464150); +#464149 = CARTESIAN_POINT('',(152.377588,-140.845917,-7.5E-02)); +#464150 = VECTOR('',#464151,1.); +#464151 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#464152 = ORIENTED_EDGE('',*,*,#464153,.T.); +#464153 = EDGE_CURVE('',#464146,#464005,#464154,.T.); +#464154 = LINE('',#464155,#464156); +#464155 = CARTESIAN_POINT('',(152.307815,-140.811031,-7.5E-02)); +#464156 = VECTOR('',#464157,1.); +#464157 = DIRECTION('',(-1.,0.,0.)); +#464158 = PLANE('',#464159); +#464159 = AXIS2_PLACEMENT_3D('',#464160,#464161,#464162); +#464160 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464161 = DIRECTION('',(-0.,-0.,-1.)); +#464162 = DIRECTION('',(-1.,0.,0.)); +#464163 = SHELL_BASED_SURFACE_MODEL('',(#464164)); +#464164 = OPEN_SHELL('',(#464165)); +#464165 = ADVANCED_FACE('',(#464166),#464376,.T.); +#464166 = FACE_BOUND('',#464167,.T.); +#464167 = EDGE_LOOP('',(#464168,#464178,#464186,#464194,#464202,#464210, + #464218,#464226,#464234,#464242,#464250,#464258,#464264,#464272, + #464280,#464286,#464294,#464302,#464310,#464318,#464326,#464334, + #464342,#464348,#464354,#464362,#464370)); +#464168 = ORIENTED_EDGE('',*,*,#464169,.T.); +#464169 = EDGE_CURVE('',#464170,#464172,#464174,.T.); +#464170 = VERTEX_POINT('',#464171); +#464171 = CARTESIAN_POINT('',(133.179773,-139.884499,-7.5E-02)); +#464172 = VERTEX_POINT('',#464173); +#464173 = CARTESIAN_POINT('',(133.467864,-139.884499,-7.5E-02)); +#464174 = LINE('',#464175,#464176); +#464175 = CARTESIAN_POINT('',(133.179773,-139.884499,-7.5E-02)); +#464176 = VECTOR('',#464177,1.); +#464177 = DIRECTION('',(1.,0.,0.)); +#464178 = ORIENTED_EDGE('',*,*,#464179,.T.); +#464179 = EDGE_CURVE('',#464172,#464180,#464182,.T.); +#464180 = VERTEX_POINT('',#464181); +#464181 = CARTESIAN_POINT('',(133.755955,-139.884499,-7.5E-02)); +#464182 = LINE('',#464183,#464184); +#464183 = CARTESIAN_POINT('',(133.467864,-139.884499,-7.5E-02)); +#464184 = VECTOR('',#464185,1.); +#464185 = DIRECTION('',(1.,0.,0.)); +#464186 = ORIENTED_EDGE('',*,*,#464187,.T.); +#464187 = EDGE_CURVE('',#464180,#464188,#464190,.T.); +#464188 = VERTEX_POINT('',#464189); +#464189 = CARTESIAN_POINT('',(133.755955,-140.17259,-7.5E-02)); +#464190 = LINE('',#464191,#464192); +#464191 = CARTESIAN_POINT('',(133.755955,-139.884499,-7.5E-02)); +#464192 = VECTOR('',#464193,1.); +#464193 = DIRECTION('',(0.,-1.,0.)); +#464194 = ORIENTED_EDGE('',*,*,#464195,.T.); +#464195 = EDGE_CURVE('',#464188,#464196,#464198,.T.); +#464196 = VERTEX_POINT('',#464197); +#464197 = CARTESIAN_POINT('',(133.467864,-140.17259,-7.5E-02)); +#464198 = LINE('',#464199,#464200); +#464199 = CARTESIAN_POINT('',(133.755955,-140.17259,-7.5E-02)); +#464200 = VECTOR('',#464201,1.); +#464201 = DIRECTION('',(-1.,0.,0.)); +#464202 = ORIENTED_EDGE('',*,*,#464203,.T.); +#464203 = EDGE_CURVE('',#464196,#464204,#464206,.T.); +#464204 = VERTEX_POINT('',#464205); +#464205 = CARTESIAN_POINT('',(133.467864,-140.748771,-7.5E-02)); +#464206 = LINE('',#464207,#464208); +#464207 = CARTESIAN_POINT('',(133.467864,-140.17259,-7.5E-02)); +#464208 = VECTOR('',#464209,1.); +#464209 = DIRECTION('',(0.,-1.,0.)); +#464210 = ORIENTED_EDGE('',*,*,#464211,.T.); +#464211 = EDGE_CURVE('',#464204,#464212,#464214,.T.); +#464212 = VERTEX_POINT('',#464213); +#464213 = CARTESIAN_POINT('',(134.044046,-140.748771,-7.5E-02)); +#464214 = LINE('',#464215,#464216); +#464215 = CARTESIAN_POINT('',(133.467864,-140.748771,-7.5E-02)); +#464216 = VECTOR('',#464217,1.); +#464217 = DIRECTION('',(1.,0.,0.)); +#464218 = ORIENTED_EDGE('',*,*,#464219,.T.); +#464219 = EDGE_CURVE('',#464212,#464220,#464222,.T.); +#464220 = VERTEX_POINT('',#464221); +#464221 = CARTESIAN_POINT('',(134.044046,-140.46068,-7.5E-02)); +#464222 = LINE('',#464223,#464224); +#464223 = CARTESIAN_POINT('',(134.044046,-140.748771,-7.5E-02)); +#464224 = VECTOR('',#464225,1.); +#464225 = DIRECTION('',(0.,1.,0.)); +#464226 = ORIENTED_EDGE('',*,*,#464227,.T.); +#464227 = EDGE_CURVE('',#464220,#464228,#464230,.T.); +#464228 = VERTEX_POINT('',#464229); +#464229 = CARTESIAN_POINT('',(134.332136,-140.46068,-7.5E-02)); +#464230 = LINE('',#464231,#464232); +#464231 = CARTESIAN_POINT('',(134.044046,-140.46068,-7.5E-02)); +#464232 = VECTOR('',#464233,1.); +#464233 = DIRECTION('',(1.,0.,0.)); +#464234 = ORIENTED_EDGE('',*,*,#464235,.T.); +#464235 = EDGE_CURVE('',#464228,#464236,#464238,.T.); +#464236 = VERTEX_POINT('',#464237); +#464237 = CARTESIAN_POINT('',(134.332136,-140.17259,-7.5E-02)); +#464238 = LINE('',#464239,#464240); +#464239 = CARTESIAN_POINT('',(134.332136,-140.46068,-7.5E-02)); +#464240 = VECTOR('',#464241,1.); +#464241 = DIRECTION('',(0.,1.,0.)); +#464242 = ORIENTED_EDGE('',*,*,#464243,.T.); +#464243 = EDGE_CURVE('',#464236,#464244,#464246,.T.); +#464244 = VERTEX_POINT('',#464245); +#464245 = CARTESIAN_POINT('',(134.620227,-140.17259,-7.5E-02)); +#464246 = LINE('',#464247,#464248); +#464247 = CARTESIAN_POINT('',(134.332136,-140.17259,-7.5E-02)); +#464248 = VECTOR('',#464249,1.); +#464249 = DIRECTION('',(1.,0.,0.)); +#464250 = ORIENTED_EDGE('',*,*,#464251,.T.); +#464251 = EDGE_CURVE('',#464244,#464252,#464254,.T.); +#464252 = VERTEX_POINT('',#464253); +#464253 = CARTESIAN_POINT('',(134.620227,-140.748771,-7.5E-02)); +#464254 = LINE('',#464255,#464256); +#464255 = CARTESIAN_POINT('',(134.620227,-140.17259,-7.5E-02)); +#464256 = VECTOR('',#464257,1.); +#464257 = DIRECTION('',(0.,-1.,0.)); +#464258 = ORIENTED_EDGE('',*,*,#464259,.T.); +#464259 = EDGE_CURVE('',#464252,#464212,#464260,.T.); +#464260 = LINE('',#464261,#464262); +#464261 = CARTESIAN_POINT('',(134.620227,-140.748771,-7.5E-02)); +#464262 = VECTOR('',#464263,1.); +#464263 = DIRECTION('',(-1.,0.,0.)); +#464264 = ORIENTED_EDGE('',*,*,#464265,.T.); +#464265 = EDGE_CURVE('',#464212,#464266,#464268,.T.); +#464266 = VERTEX_POINT('',#464267); +#464267 = CARTESIAN_POINT('',(134.044046,-141.036862,-7.5E-02)); +#464268 = LINE('',#464269,#464270); +#464269 = CARTESIAN_POINT('',(134.044046,-140.748771,-7.5E-02)); +#464270 = VECTOR('',#464271,1.); +#464271 = DIRECTION('',(0.,-1.,0.)); +#464272 = ORIENTED_EDGE('',*,*,#464273,.T.); +#464273 = EDGE_CURVE('',#464266,#464274,#464276,.T.); +#464274 = VERTEX_POINT('',#464275); +#464275 = CARTESIAN_POINT('',(133.467864,-141.036862,-7.5E-02)); +#464276 = LINE('',#464277,#464278); +#464277 = CARTESIAN_POINT('',(134.044046,-141.036862,-7.5E-02)); +#464278 = VECTOR('',#464279,1.); +#464279 = DIRECTION('',(-1.,0.,0.)); +#464280 = ORIENTED_EDGE('',*,*,#464281,.T.); +#464281 = EDGE_CURVE('',#464274,#464204,#464282,.T.); +#464282 = LINE('',#464283,#464284); +#464283 = CARTESIAN_POINT('',(133.467864,-141.036862,-7.5E-02)); +#464284 = VECTOR('',#464285,1.); +#464285 = DIRECTION('',(0.,1.,0.)); +#464286 = ORIENTED_EDGE('',*,*,#464287,.T.); +#464287 = EDGE_CURVE('',#464204,#464288,#464290,.T.); +#464288 = VERTEX_POINT('',#464289); +#464289 = CARTESIAN_POINT('',(132.891683,-140.748771,-7.5E-02)); +#464290 = LINE('',#464291,#464292); +#464291 = CARTESIAN_POINT('',(133.467864,-140.748771,-7.5E-02)); +#464292 = VECTOR('',#464293,1.); +#464293 = DIRECTION('',(-1.,0.,0.)); +#464294 = ORIENTED_EDGE('',*,*,#464295,.T.); +#464295 = EDGE_CURVE('',#464288,#464296,#464298,.T.); +#464296 = VERTEX_POINT('',#464297); +#464297 = CARTESIAN_POINT('',(132.891683,-141.036862,-7.5E-02)); +#464298 = LINE('',#464299,#464300); +#464299 = CARTESIAN_POINT('',(132.891683,-140.748771,-7.5E-02)); +#464300 = VECTOR('',#464301,1.); +#464301 = DIRECTION('',(0.,-1.,0.)); +#464302 = ORIENTED_EDGE('',*,*,#464303,.T.); +#464303 = EDGE_CURVE('',#464296,#464304,#464306,.T.); +#464304 = VERTEX_POINT('',#464305); +#464305 = CARTESIAN_POINT('',(132.603592,-141.036862,-7.5E-02)); +#464306 = LINE('',#464307,#464308); +#464307 = CARTESIAN_POINT('',(132.891683,-141.036862,-7.5E-02)); +#464308 = VECTOR('',#464309,1.); +#464309 = DIRECTION('',(-1.,0.,0.)); +#464310 = ORIENTED_EDGE('',*,*,#464311,.T.); +#464311 = EDGE_CURVE('',#464304,#464312,#464314,.T.); +#464312 = VERTEX_POINT('',#464313); +#464313 = CARTESIAN_POINT('',(132.603592,-140.748771,-7.5E-02)); +#464314 = LINE('',#464315,#464316); +#464315 = CARTESIAN_POINT('',(132.603592,-141.036862,-7.5E-02)); +#464316 = VECTOR('',#464317,1.); +#464317 = DIRECTION('',(0.,1.,0.)); +#464318 = ORIENTED_EDGE('',*,*,#464319,.T.); +#464319 = EDGE_CURVE('',#464312,#464320,#464322,.T.); +#464320 = VERTEX_POINT('',#464321); +#464321 = CARTESIAN_POINT('',(132.315501,-140.748771,-7.5E-02)); +#464322 = LINE('',#464323,#464324); +#464323 = CARTESIAN_POINT('',(132.603592,-140.748771,-7.5E-02)); +#464324 = VECTOR('',#464325,1.); +#464325 = DIRECTION('',(-1.,0.,0.)); +#464326 = ORIENTED_EDGE('',*,*,#464327,.T.); +#464327 = EDGE_CURVE('',#464320,#464328,#464330,.T.); +#464328 = VERTEX_POINT('',#464329); +#464329 = CARTESIAN_POINT('',(132.315501,-140.46068,-7.5E-02)); +#464330 = LINE('',#464331,#464332); +#464331 = CARTESIAN_POINT('',(132.315501,-140.748771,-7.5E-02)); +#464332 = VECTOR('',#464333,1.); +#464333 = DIRECTION('',(0.,1.,0.)); +#464334 = ORIENTED_EDGE('',*,*,#464335,.T.); +#464335 = EDGE_CURVE('',#464328,#464336,#464338,.T.); +#464336 = VERTEX_POINT('',#464337); +#464337 = CARTESIAN_POINT('',(132.603592,-140.46068,-7.5E-02)); +#464338 = LINE('',#464339,#464340); +#464339 = CARTESIAN_POINT('',(132.315501,-140.46068,-7.5E-02)); +#464340 = VECTOR('',#464341,1.); +#464341 = DIRECTION('',(1.,0.,0.)); +#464342 = ORIENTED_EDGE('',*,*,#464343,.T.); +#464343 = EDGE_CURVE('',#464336,#464312,#464344,.T.); +#464344 = LINE('',#464345,#464346); +#464345 = CARTESIAN_POINT('',(132.603592,-140.46068,-7.5E-02)); +#464346 = VECTOR('',#464347,1.); +#464347 = DIRECTION('',(0.,-1.,0.)); +#464348 = ORIENTED_EDGE('',*,*,#464349,.T.); +#464349 = EDGE_CURVE('',#464312,#464288,#464350,.T.); +#464350 = LINE('',#464351,#464352); +#464351 = CARTESIAN_POINT('',(132.603592,-140.748771,-7.5E-02)); +#464352 = VECTOR('',#464353,1.); +#464353 = DIRECTION('',(1.,0.,0.)); +#464354 = ORIENTED_EDGE('',*,*,#464355,.T.); +#464355 = EDGE_CURVE('',#464288,#464356,#464358,.T.); +#464356 = VERTEX_POINT('',#464357); +#464357 = CARTESIAN_POINT('',(132.891683,-140.46068,-7.5E-02)); +#464358 = LINE('',#464359,#464360); +#464359 = CARTESIAN_POINT('',(132.891683,-140.748771,-7.5E-02)); +#464360 = VECTOR('',#464361,1.); +#464361 = DIRECTION('',(0.,1.,0.)); +#464362 = ORIENTED_EDGE('',*,*,#464363,.T.); +#464363 = EDGE_CURVE('',#464356,#464364,#464366,.T.); +#464364 = VERTEX_POINT('',#464365); +#464365 = CARTESIAN_POINT('',(133.179773,-140.46068,-7.5E-02)); +#464366 = LINE('',#464367,#464368); +#464367 = CARTESIAN_POINT('',(132.891683,-140.46068,-7.5E-02)); +#464368 = VECTOR('',#464369,1.); +#464369 = DIRECTION('',(1.,0.,0.)); +#464370 = ORIENTED_EDGE('',*,*,#464371,.T.); +#464371 = EDGE_CURVE('',#464364,#464170,#464372,.T.); +#464372 = LINE('',#464373,#464374); +#464373 = CARTESIAN_POINT('',(133.179773,-140.46068,-7.5E-02)); +#464374 = VECTOR('',#464375,1.); +#464375 = DIRECTION('',(0.,1.,0.)); +#464376 = PLANE('',#464377); +#464377 = AXIS2_PLACEMENT_3D('',#464378,#464379,#464380); +#464378 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464379 = DIRECTION('',(-0.,-0.,-1.)); +#464380 = DIRECTION('',(-1.,0.,0.)); +#464381 = SHELL_BASED_SURFACE_MODEL('',(#464382)); +#464382 = OPEN_SHELL('',(#464383)); +#464383 = ADVANCED_FACE('',(#464384),#464426,.T.); +#464384 = FACE_BOUND('',#464385,.T.); +#464385 = EDGE_LOOP('',(#464386,#464396,#464404,#464412,#464420)); +#464386 = ORIENTED_EDGE('',*,*,#464387,.T.); +#464387 = EDGE_CURVE('',#464388,#464390,#464392,.T.); +#464388 = VERTEX_POINT('',#464389); +#464389 = CARTESIAN_POINT('',(134.908318,-141.036862,-7.5E-02)); +#464390 = VERTEX_POINT('',#464391); +#464391 = CARTESIAN_POINT('',(134.908318,-140.748771,-7.5E-02)); +#464392 = LINE('',#464393,#464394); +#464393 = CARTESIAN_POINT('',(134.908318,-141.036862,-7.5E-02)); +#464394 = VECTOR('',#464395,1.); +#464395 = DIRECTION('',(0.,1.,0.)); +#464396 = ORIENTED_EDGE('',*,*,#464397,.T.); +#464397 = EDGE_CURVE('',#464390,#464398,#464400,.T.); +#464398 = VERTEX_POINT('',#464399); +#464399 = CARTESIAN_POINT('',(135.196408,-140.748771,-7.5E-02)); +#464400 = LINE('',#464401,#464402); +#464401 = CARTESIAN_POINT('',(134.908318,-140.748771,-7.5E-02)); +#464402 = VECTOR('',#464403,1.); +#464403 = DIRECTION('',(1.,0.,0.)); +#464404 = ORIENTED_EDGE('',*,*,#464405,.T.); +#464405 = EDGE_CURVE('',#464398,#464406,#464408,.T.); +#464406 = VERTEX_POINT('',#464407); +#464407 = CARTESIAN_POINT('',(135.196408,-140.892816,-7.5E-02)); +#464408 = LINE('',#464409,#464410); +#464409 = CARTESIAN_POINT('',(135.196408,-140.748771,-7.5E-02)); +#464410 = VECTOR('',#464411,1.); +#464411 = DIRECTION('',(0.,-1.,0.)); +#464412 = ORIENTED_EDGE('',*,*,#464413,.T.); +#464413 = EDGE_CURVE('',#464406,#464414,#464416,.T.); +#464414 = VERTEX_POINT('',#464415); +#464415 = CARTESIAN_POINT('',(135.196408,-141.036862,-7.5E-02)); +#464416 = LINE('',#464417,#464418); +#464417 = CARTESIAN_POINT('',(135.196408,-140.892816,-7.5E-02)); +#464418 = VECTOR('',#464419,1.); +#464419 = DIRECTION('',(0.,-1.,0.)); +#464420 = ORIENTED_EDGE('',*,*,#464421,.T.); +#464421 = EDGE_CURVE('',#464414,#464388,#464422,.T.); +#464422 = LINE('',#464423,#464424); +#464423 = CARTESIAN_POINT('',(135.196408,-141.036862,-7.5E-02)); +#464424 = VECTOR('',#464425,1.); +#464425 = DIRECTION('',(-1.,0.,0.)); +#464426 = PLANE('',#464427); +#464427 = AXIS2_PLACEMENT_3D('',#464428,#464429,#464430); +#464428 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464429 = DIRECTION('',(-0.,-0.,-1.)); +#464430 = DIRECTION('',(-1.,0.,0.)); +#464431 = SHELL_BASED_SURFACE_MODEL('',(#464432)); +#464432 = OPEN_SHELL('',(#464433)); +#464433 = ADVANCED_FACE('',(#464434),#464517,.T.); +#464434 = FACE_BOUND('',#464435,.T.); +#464435 = EDGE_LOOP('',(#464436,#464447,#464455,#464463,#464471,#464479, + #464487,#464495,#464503,#464511)); +#464436 = ORIENTED_EDGE('',*,*,#464437,.T.); +#464437 = EDGE_CURVE('',#464438,#464440,#464442,.T.); +#464438 = VERTEX_POINT('',#464439); +#464439 = CARTESIAN_POINT('',(153.084682,-140.725673,-7.5E-02)); +#464440 = VERTEX_POINT('',#464441); +#464441 = CARTESIAN_POINT('',(153.155393,-140.725673,-7.5E-02)); +#464442 = CIRCLE('',#464443,4.99989828929E-02); +#464443 = AXIS2_PLACEMENT_3D('',#464444,#464445,#464446); +#464444 = CARTESIAN_POINT('',(153.1200375,-140.7610267396,-7.5E-02)); +#464445 = DIRECTION('',(0.,0.,-1.)); +#464446 = DIRECTION('',(-0.707124384425,0.70708917751,0.)); +#464447 = ORIENTED_EDGE('',*,*,#464448,.T.); +#464448 = EDGE_CURVE('',#464440,#464449,#464451,.T.); +#464449 = VERTEX_POINT('',#464450); +#464450 = CARTESIAN_POINT('',(153.213851,-140.789513,-7.5E-02)); +#464451 = LINE('',#464452,#464453); +#464452 = CARTESIAN_POINT('',(153.155393,-140.725673,-7.5E-02)); +#464453 = VECTOR('',#464454,1.); +#464454 = DIRECTION('',(0.675335324481,-0.737510813146,0.)); +#464455 = ORIENTED_EDGE('',*,*,#464456,.T.); +#464456 = EDGE_CURVE('',#464449,#464457,#464459,.T.); +#464457 = VERTEX_POINT('',#464458); +#464458 = CARTESIAN_POINT('',(153.213851,-140.827782,-7.5E-02)); +#464459 = LINE('',#464460,#464461); +#464460 = CARTESIAN_POINT('',(153.213851,-140.789513,-7.5E-02)); +#464461 = VECTOR('',#464462,1.); +#464462 = DIRECTION('',(0.,-1.,0.)); +#464463 = ORIENTED_EDGE('',*,*,#464464,.T.); +#464464 = EDGE_CURVE('',#464457,#464465,#464467,.T.); +#464465 = VERTEX_POINT('',#464466); +#464466 = CARTESIAN_POINT('',(153.155393,-140.891621,-7.5E-02)); +#464467 = LINE('',#464468,#464469); +#464468 = CARTESIAN_POINT('',(153.213851,-140.827782,-7.5E-02)); +#464469 = VECTOR('',#464470,1.); +#464470 = DIRECTION('',(-0.675341078424,-0.737505544245,0.)); +#464471 = ORIENTED_EDGE('',*,*,#464472,.T.); +#464472 = EDGE_CURVE('',#464465,#464473,#464475,.T.); +#464473 = VERTEX_POINT('',#464474); +#464474 = CARTESIAN_POINT('',(153.139172,-140.90246,-7.5E-02)); +#464475 = LINE('',#464476,#464477); +#464476 = CARTESIAN_POINT('',(153.155393,-140.891621,-7.5E-02)); +#464477 = VECTOR('',#464478,1.); +#464478 = DIRECTION('',(-0.831458381235,-0.555587041132,0.)); +#464479 = ORIENTED_EDGE('',*,*,#464480,.T.); +#464480 = EDGE_CURVE('',#464473,#464481,#464483,.T.); +#464481 = VERTEX_POINT('',#464482); +#464482 = CARTESIAN_POINT('',(153.100903,-140.90246,-7.5E-02)); +#464483 = LINE('',#464484,#464485); +#464484 = CARTESIAN_POINT('',(153.139172,-140.90246,-7.5E-02)); +#464485 = VECTOR('',#464486,1.); +#464486 = DIRECTION('',(-1.,0.,0.)); +#464487 = ORIENTED_EDGE('',*,*,#464488,.T.); +#464488 = EDGE_CURVE('',#464481,#464489,#464491,.T.); +#464489 = VERTEX_POINT('',#464490); +#464490 = CARTESIAN_POINT('',(153.037064,-140.844002,-7.5E-02)); +#464491 = LINE('',#464492,#464493); +#464492 = CARTESIAN_POINT('',(153.100903,-140.90246,-7.5E-02)); +#464493 = VECTOR('',#464494,1.); +#464494 = DIRECTION('',(-0.737505544246,0.675341078424,0.)); +#464495 = ORIENTED_EDGE('',*,*,#464496,.T.); +#464496 = EDGE_CURVE('',#464489,#464497,#464499,.T.); +#464497 = VERTEX_POINT('',#464498); +#464498 = CARTESIAN_POINT('',(153.026225,-140.827781,-7.5E-02)); +#464499 = LINE('',#464500,#464501); +#464500 = CARTESIAN_POINT('',(153.037064,-140.844002,-7.5E-02)); +#464501 = VECTOR('',#464502,1.); +#464502 = DIRECTION('',(-0.555587041131,0.831458381236,0.)); +#464503 = ORIENTED_EDGE('',*,*,#464504,.T.); +#464504 = EDGE_CURVE('',#464497,#464505,#464507,.T.); +#464505 = VERTEX_POINT('',#464506); +#464506 = CARTESIAN_POINT('',(153.026226,-140.789512,-7.5E-02)); +#464507 = LINE('',#464508,#464509); +#464508 = CARTESIAN_POINT('',(153.026225,-140.827781,-7.5E-02)); +#464509 = VECTOR('',#464510,1.); +#464510 = DIRECTION('',(2.613081076418E-05,0.999999999659,0.)); +#464511 = ORIENTED_EDGE('',*,*,#464512,.T.); +#464512 = EDGE_CURVE('',#464505,#464438,#464513,.T.); +#464513 = LINE('',#464514,#464515); +#464514 = CARTESIAN_POINT('',(153.026226,-140.789512,-7.5E-02)); +#464515 = VECTOR('',#464516,1.); +#464516 = DIRECTION('',(0.675328510893,0.73751705226,0.)); +#464517 = PLANE('',#464518); +#464518 = AXIS2_PLACEMENT_3D('',#464519,#464520,#464521); +#464519 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464520 = DIRECTION('',(-0.,-0.,-1.)); +#464521 = DIRECTION('',(-1.,0.,0.)); +#464522 = SHELL_BASED_SURFACE_MODEL('',(#464523)); +#464523 = OPEN_SHELL('',(#464524)); +#464524 = ADVANCED_FACE('',(#464525),#464561,.T.); +#464525 = FACE_BOUND('',#464526,.T.); +#464526 = EDGE_LOOP('',(#464527,#464538,#464546,#464555)); +#464527 = ORIENTED_EDGE('',*,*,#464528,.T.); +#464528 = EDGE_CURVE('',#464529,#464531,#464533,.T.); +#464529 = VERTEX_POINT('',#464530); +#464530 = CARTESIAN_POINT('',(153.405752,-140.858647,-7.5E-02)); +#464531 = VERTEX_POINT('',#464532); +#464532 = CARTESIAN_POINT('',(153.405752,-140.758647,-7.5E-02)); +#464533 = CIRCLE('',#464534,5.000000000002E-02); +#464534 = AXIS2_PLACEMENT_3D('',#464535,#464536,#464537); +#464535 = CARTESIAN_POINT('',(153.40575204771,-140.808647,-7.5E-02)); +#464536 = DIRECTION('',(0.,0.,-1.)); +#464537 = DIRECTION('',(-9.542361567576E-07,-1.,-0.)); +#464538 = ORIENTED_EDGE('',*,*,#464539,.T.); +#464539 = EDGE_CURVE('',#464531,#464540,#464542,.T.); +#464540 = VERTEX_POINT('',#464541); +#464541 = CARTESIAN_POINT('',(154.072419,-140.758647,-7.5E-02)); +#464542 = LINE('',#464543,#464544); +#464543 = CARTESIAN_POINT('',(153.405752,-140.758647,-7.5E-02)); +#464544 = VECTOR('',#464545,1.); +#464545 = DIRECTION('',(1.,0.,0.)); +#464546 = ORIENTED_EDGE('',*,*,#464547,.T.); +#464547 = EDGE_CURVE('',#464540,#464548,#464550,.T.); +#464548 = VERTEX_POINT('',#464549); +#464549 = CARTESIAN_POINT('',(154.072419,-140.858647,-7.5E-02)); +#464550 = CIRCLE('',#464551,5.000000000002E-02); +#464551 = AXIS2_PLACEMENT_3D('',#464552,#464553,#464554); +#464552 = CARTESIAN_POINT('',(154.07241895228,-140.808647,-7.5E-02)); +#464553 = DIRECTION('',(0.,0.,-1.)); +#464554 = DIRECTION('',(9.542361567582E-07,1.,0.)); +#464555 = ORIENTED_EDGE('',*,*,#464556,.T.); +#464556 = EDGE_CURVE('',#464548,#464529,#464557,.T.); +#464557 = LINE('',#464558,#464559); +#464558 = CARTESIAN_POINT('',(154.072419,-140.858647,-7.5E-02)); +#464559 = VECTOR('',#464560,1.); +#464560 = DIRECTION('',(-1.,0.,0.)); +#464561 = PLANE('',#464562); +#464562 = AXIS2_PLACEMENT_3D('',#464563,#464564,#464565); +#464563 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464564 = DIRECTION('',(-0.,-0.,-1.)); +#464565 = DIRECTION('',(-1.,0.,0.)); +#464566 = SHELL_BASED_SURFACE_MODEL('',(#464567)); +#464567 = OPEN_SHELL('',(#464568)); +#464568 = ADVANCED_FACE('',(#464569),#464659,.T.); +#464569 = FACE_BOUND('',#464570,.T.); +#464570 = EDGE_LOOP('',(#464571,#464581,#464589,#464597,#464605,#464613, + #464621,#464629,#464637,#464645,#464653)); +#464571 = ORIENTED_EDGE('',*,*,#464572,.T.); +#464572 = EDGE_CURVE('',#464573,#464575,#464577,.T.); +#464573 = VERTEX_POINT('',#464574); +#464574 = CARTESIAN_POINT('',(128.570322,-140.17259,-7.5E-02)); +#464575 = VERTEX_POINT('',#464576); +#464576 = CARTESIAN_POINT('',(128.570322,-139.308317,-7.5E-02)); +#464577 = LINE('',#464578,#464579); +#464578 = CARTESIAN_POINT('',(128.570322,-140.17259,-7.5E-02)); +#464579 = VECTOR('',#464580,1.); +#464580 = DIRECTION('',(0.,1.,0.)); +#464581 = ORIENTED_EDGE('',*,*,#464582,.T.); +#464582 = EDGE_CURVE('',#464575,#464583,#464585,.T.); +#464583 = VERTEX_POINT('',#464584); +#464584 = CARTESIAN_POINT('',(128.858412,-139.308317,-7.5E-02)); +#464585 = LINE('',#464586,#464587); +#464586 = CARTESIAN_POINT('',(128.570322,-139.308317,-7.5E-02)); +#464587 = VECTOR('',#464588,1.); +#464588 = DIRECTION('',(1.,0.,0.)); +#464589 = ORIENTED_EDGE('',*,*,#464590,.T.); +#464590 = EDGE_CURVE('',#464583,#464591,#464593,.T.); +#464591 = VERTEX_POINT('',#464592); +#464592 = CARTESIAN_POINT('',(128.858412,-139.452363,-7.5E-02)); +#464593 = LINE('',#464594,#464595); +#464594 = CARTESIAN_POINT('',(128.858412,-139.308317,-7.5E-02)); +#464595 = VECTOR('',#464596,1.); +#464596 = DIRECTION('',(0.,-1.,0.)); +#464597 = ORIENTED_EDGE('',*,*,#464598,.T.); +#464598 = EDGE_CURVE('',#464591,#464599,#464601,.T.); +#464599 = VERTEX_POINT('',#464600); +#464600 = CARTESIAN_POINT('',(128.858412,-139.596408,-7.5E-02)); +#464601 = LINE('',#464602,#464603); +#464602 = CARTESIAN_POINT('',(128.858412,-139.452363,-7.5E-02)); +#464603 = VECTOR('',#464604,1.); +#464604 = DIRECTION('',(0.,-1.,0.)); +#464605 = ORIENTED_EDGE('',*,*,#464606,.T.); +#464606 = EDGE_CURVE('',#464599,#464607,#464609,.T.); +#464607 = VERTEX_POINT('',#464608); +#464608 = CARTESIAN_POINT('',(129.434594,-139.596408,-7.5E-02)); +#464609 = LINE('',#464610,#464611); +#464610 = CARTESIAN_POINT('',(128.858412,-139.596408,-7.5E-02)); +#464611 = VECTOR('',#464612,1.); +#464612 = DIRECTION('',(1.,0.,0.)); +#464613 = ORIENTED_EDGE('',*,*,#464614,.T.); +#464614 = EDGE_CURVE('',#464607,#464615,#464617,.T.); +#464615 = VERTEX_POINT('',#464616); +#464616 = CARTESIAN_POINT('',(129.434594,-140.46068,-7.5E-02)); +#464617 = LINE('',#464618,#464619); +#464618 = CARTESIAN_POINT('',(129.434594,-139.596408,-7.5E-02)); +#464619 = VECTOR('',#464620,1.); +#464620 = DIRECTION('',(0.,-1.,0.)); +#464621 = ORIENTED_EDGE('',*,*,#464622,.T.); +#464622 = EDGE_CURVE('',#464615,#464623,#464625,.T.); +#464623 = VERTEX_POINT('',#464624); +#464624 = CARTESIAN_POINT('',(129.146503,-140.46068,-7.5E-02)); +#464625 = LINE('',#464626,#464627); +#464626 = CARTESIAN_POINT('',(129.434594,-140.46068,-7.5E-02)); +#464627 = VECTOR('',#464628,1.); +#464628 = DIRECTION('',(-1.,0.,0.)); +#464629 = ORIENTED_EDGE('',*,*,#464630,.T.); +#464630 = EDGE_CURVE('',#464623,#464631,#464633,.T.); +#464631 = VERTEX_POINT('',#464632); +#464632 = CARTESIAN_POINT('',(129.146503,-139.884499,-7.5E-02)); +#464633 = LINE('',#464634,#464635); +#464634 = CARTESIAN_POINT('',(129.146503,-140.46068,-7.5E-02)); +#464635 = VECTOR('',#464636,1.); +#464636 = DIRECTION('',(0.,1.,0.)); +#464637 = ORIENTED_EDGE('',*,*,#464638,.T.); +#464638 = EDGE_CURVE('',#464631,#464639,#464641,.T.); +#464639 = VERTEX_POINT('',#464640); +#464640 = CARTESIAN_POINT('',(128.858412,-139.884499,-7.5E-02)); +#464641 = LINE('',#464642,#464643); +#464642 = CARTESIAN_POINT('',(129.146503,-139.884499,-7.5E-02)); +#464643 = VECTOR('',#464644,1.); +#464644 = DIRECTION('',(-1.,0.,0.)); +#464645 = ORIENTED_EDGE('',*,*,#464646,.T.); +#464646 = EDGE_CURVE('',#464639,#464647,#464649,.T.); +#464647 = VERTEX_POINT('',#464648); +#464648 = CARTESIAN_POINT('',(128.858412,-140.17259,-7.5E-02)); +#464649 = LINE('',#464650,#464651); +#464650 = CARTESIAN_POINT('',(128.858412,-139.884499,-7.5E-02)); +#464651 = VECTOR('',#464652,1.); +#464652 = DIRECTION('',(0.,-1.,0.)); +#464653 = ORIENTED_EDGE('',*,*,#464654,.T.); +#464654 = EDGE_CURVE('',#464647,#464573,#464655,.T.); +#464655 = LINE('',#464656,#464657); +#464656 = CARTESIAN_POINT('',(128.858412,-140.17259,-7.5E-02)); +#464657 = VECTOR('',#464658,1.); +#464658 = DIRECTION('',(-1.,0.,0.)); +#464659 = PLANE('',#464660); +#464660 = AXIS2_PLACEMENT_3D('',#464661,#464662,#464663); +#464661 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464662 = DIRECTION('',(-0.,-0.,-1.)); +#464663 = DIRECTION('',(-1.,0.,0.)); +#464664 = SHELL_BASED_SURFACE_MODEL('',(#464665)); +#464665 = OPEN_SHELL('',(#464666)); +#464666 = ADVANCED_FACE('',(#464667),#464816,.T.); +#464667 = FACE_BOUND('',#464668,.T.); +#464668 = EDGE_LOOP('',(#464669,#464680,#464688,#464697,#464705,#464713, + #464721,#464729,#464737,#464745,#464753,#464762,#464770,#464778, + #464786,#464794,#464802,#464810)); +#464669 = ORIENTED_EDGE('',*,*,#464670,.T.); +#464670 = EDGE_CURVE('',#464671,#464673,#464675,.T.); +#464671 = VERTEX_POINT('',#464672); +#464672 = CARTESIAN_POINT('',(153.386618,-139.950079,-7.5E-02)); +#464673 = VERTEX_POINT('',#464674); +#464674 = CARTESIAN_POINT('',(153.405752,-139.853885,-7.5E-02)); +#464675 = CIRCLE('',#464676,4.999998452108E-02); +#464676 = AXIS2_PLACEMENT_3D('',#464677,#464678,#464679); +#464677 = CARTESIAN_POINT('',(153.40575203736,-139.9038849845,-7.5E-02) + ); +#464678 = DIRECTION('',(0.,0.,-1.)); +#464679 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#464680 = ORIENTED_EDGE('',*,*,#464681,.T.); +#464681 = EDGE_CURVE('',#464673,#464682,#464684,.T.); +#464682 = VERTEX_POINT('',#464683); +#464683 = CARTESIAN_POINT('',(154.072419,-139.853885,-7.5E-02)); +#464684 = LINE('',#464685,#464686); +#464685 = CARTESIAN_POINT('',(153.405752,-139.853885,-7.5E-02)); +#464686 = VECTOR('',#464687,1.); +#464687 = DIRECTION('',(1.,0.,0.)); +#464688 = ORIENTED_EDGE('',*,*,#464689,.T.); +#464689 = EDGE_CURVE('',#464682,#464690,#464692,.T.); +#464690 = VERTEX_POINT('',#464691); +#464691 = CARTESIAN_POINT('',(154.072419,-139.953885,-7.5E-02)); +#464692 = CIRCLE('',#464693,5.000000000003E-02); +#464693 = AXIS2_PLACEMENT_3D('',#464694,#464695,#464696); +#464694 = CARTESIAN_POINT('',(154.07241895228,-139.903885,-7.5E-02)); +#464695 = DIRECTION('',(0.,0.,-1.)); +#464696 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#464697 = ORIENTED_EDGE('',*,*,#464698,.T.); +#464698 = EDGE_CURVE('',#464690,#464699,#464701,.T.); +#464699 = VERTEX_POINT('',#464700); +#464700 = CARTESIAN_POINT('',(153.521701,-139.953885,-7.5E-02)); +#464701 = LINE('',#464702,#464703); +#464702 = CARTESIAN_POINT('',(154.072419,-139.953885,-7.5E-02)); +#464703 = VECTOR('',#464704,1.); +#464704 = DIRECTION('',(-1.,0.,0.)); +#464705 = ORIENTED_EDGE('',*,*,#464706,.T.); +#464706 = EDGE_CURVE('',#464699,#464707,#464709,.T.); +#464707 = VERTEX_POINT('',#464708); +#464708 = CARTESIAN_POINT('',(153.494463,-139.981121,-7.5E-02)); +#464709 = LINE('',#464710,#464711); +#464710 = CARTESIAN_POINT('',(153.521701,-139.953885,-7.5E-02)); +#464711 = VECTOR('',#464712,1.); +#464712 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#464713 = ORIENTED_EDGE('',*,*,#464714,.T.); +#464714 = EDGE_CURVE('',#464707,#464715,#464717,.T.); +#464715 = VERTEX_POINT('',#464716); +#464716 = CARTESIAN_POINT('',(153.455752,-140.058545,-7.5E-02)); +#464717 = LINE('',#464718,#464719); +#464718 = CARTESIAN_POINT('',(153.494463,-139.981121,-7.5E-02)); +#464719 = VECTOR('',#464720,1.); +#464720 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#464721 = ORIENTED_EDGE('',*,*,#464722,.T.); +#464722 = EDGE_CURVE('',#464715,#464723,#464725,.T.); +#464723 = VERTEX_POINT('',#464724); +#464724 = CARTESIAN_POINT('',(153.455752,-140.177796,-7.5E-02)); +#464725 = LINE('',#464726,#464727); +#464726 = CARTESIAN_POINT('',(153.455752,-140.058545,-7.5E-02)); +#464727 = VECTOR('',#464728,1.); +#464728 = DIRECTION('',(0.,-1.,0.)); +#464729 = ORIENTED_EDGE('',*,*,#464730,.T.); +#464730 = EDGE_CURVE('',#464723,#464731,#464733,.T.); +#464731 = VERTEX_POINT('',#464732); +#464732 = CARTESIAN_POINT('',(153.490638,-140.247569,-7.5E-02)); +#464733 = LINE('',#464734,#464735); +#464734 = CARTESIAN_POINT('',(153.455752,-140.177796,-7.5E-02)); +#464735 = VECTOR('',#464736,1.); +#464736 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#464737 = ORIENTED_EDGE('',*,*,#464738,.T.); +#464738 = EDGE_CURVE('',#464731,#464739,#464741,.T.); +#464739 = VERTEX_POINT('',#464740); +#464740 = CARTESIAN_POINT('',(153.560413,-140.282456,-7.5E-02)); +#464741 = LINE('',#464742,#464743); +#464742 = CARTESIAN_POINT('',(153.490638,-140.247569,-7.5E-02)); +#464743 = VECTOR('',#464744,1.); +#464744 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#464745 = ORIENTED_EDGE('',*,*,#464746,.T.); +#464746 = EDGE_CURVE('',#464739,#464747,#464749,.T.); +#464747 = VERTEX_POINT('',#464748); +#464748 = CARTESIAN_POINT('',(154.072419,-140.282456,-7.5E-02)); +#464749 = LINE('',#464750,#464751); +#464750 = CARTESIAN_POINT('',(153.560413,-140.282456,-7.5E-02)); +#464751 = VECTOR('',#464752,1.); +#464752 = DIRECTION('',(1.,0.,0.)); +#464753 = ORIENTED_EDGE('',*,*,#464754,.T.); +#464754 = EDGE_CURVE('',#464747,#464755,#464757,.T.); +#464755 = VERTEX_POINT('',#464756); +#464756 = CARTESIAN_POINT('',(154.072419,-140.382456,-7.5E-02)); +#464757 = CIRCLE('',#464758,5.000000000002E-02); +#464758 = AXIS2_PLACEMENT_3D('',#464759,#464760,#464761); +#464759 = CARTESIAN_POINT('',(154.07241895228,-140.332456,-7.5E-02)); +#464760 = DIRECTION('',(0.,0.,-1.)); +#464761 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#464762 = ORIENTED_EDGE('',*,*,#464763,.T.); +#464763 = EDGE_CURVE('',#464755,#464764,#464766,.T.); +#464764 = VERTEX_POINT('',#464765); +#464765 = CARTESIAN_POINT('',(153.537336,-140.380213,-7.5E-02)); +#464766 = LINE('',#464767,#464768); +#464767 = CARTESIAN_POINT('',(154.072419,-140.382456,-7.5E-02)); +#464768 = VECTOR('',#464769,1.); +#464769 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#464770 = ORIENTED_EDGE('',*,*,#464771,.T.); +#464771 = EDGE_CURVE('',#464764,#464772,#464774,.T.); +#464772 = VERTEX_POINT('',#464773); +#464773 = CARTESIAN_POINT('',(153.420611,-140.322609,-7.5E-02)); +#464774 = LINE('',#464775,#464776); +#464775 = CARTESIAN_POINT('',(153.537336,-140.380213,-7.5E-02)); +#464776 = VECTOR('',#464777,1.); +#464777 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#464778 = ORIENTED_EDGE('',*,*,#464779,.T.); +#464779 = EDGE_CURVE('',#464772,#464780,#464782,.T.); +#464780 = VERTEX_POINT('',#464781); +#464781 = CARTESIAN_POINT('',(153.408649,-140.307197,-7.5E-02)); +#464782 = LINE('',#464783,#464784); +#464783 = CARTESIAN_POINT('',(153.420611,-140.322609,-7.5E-02)); +#464784 = VECTOR('',#464785,1.); +#464785 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#464786 = ORIENTED_EDGE('',*,*,#464787,.T.); +#464787 = EDGE_CURVE('',#464780,#464788,#464790,.T.); +#464788 = VERTEX_POINT('',#464789); +#464789 = CARTESIAN_POINT('',(153.357994,-140.200871,-7.5E-02)); +#464790 = LINE('',#464791,#464792); +#464791 = CARTESIAN_POINT('',(153.408649,-140.307197,-7.5E-02)); +#464792 = VECTOR('',#464793,1.); +#464793 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#464794 = ORIENTED_EDGE('',*,*,#464795,.T.); +#464795 = EDGE_CURVE('',#464788,#464796,#464798,.T.); +#464796 = VERTEX_POINT('',#464797); +#464797 = CARTESIAN_POINT('',(153.357994,-140.035469,-7.5E-02)); +#464798 = LINE('',#464799,#464800); +#464799 = CARTESIAN_POINT('',(153.357994,-140.200871,-7.5E-02)); +#464800 = VECTOR('',#464801,1.); +#464801 = DIRECTION('',(0.,1.,0.)); +#464802 = ORIENTED_EDGE('',*,*,#464803,.T.); +#464803 = EDGE_CURVE('',#464796,#464804,#464806,.T.); +#464804 = VERTEX_POINT('',#464805); +#464805 = CARTESIAN_POINT('',(153.397135,-139.952171,-7.5E-02)); +#464806 = LINE('',#464807,#464808); +#464807 = CARTESIAN_POINT('',(153.357994,-140.035469,-7.5E-02)); +#464808 = VECTOR('',#464809,1.); +#464809 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#464810 = ORIENTED_EDGE('',*,*,#464811,.T.); +#464811 = EDGE_CURVE('',#464804,#464671,#464812,.T.); +#464812 = LINE('',#464813,#464814); +#464813 = CARTESIAN_POINT('',(153.397135,-139.952171,-7.5E-02)); +#464814 = VECTOR('',#464815,1.); +#464815 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#464816 = PLANE('',#464817); +#464817 = AXIS2_PLACEMENT_3D('',#464818,#464819,#464820); +#464818 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464819 = DIRECTION('',(-0.,-0.,-1.)); +#464820 = DIRECTION('',(-1.,0.,0.)); +#464821 = SHELL_BASED_SURFACE_MODEL('',(#464822)); +#464822 = OPEN_SHELL('',(#464823)); +#464823 = ADVANCED_FACE('',(#464824,#464917),#464969,.T.); +#464824 = FACE_BOUND('',#464825,.T.); +#464825 = EDGE_LOOP('',(#464826,#464837,#464845,#464854,#464862,#464870, + #464878,#464887,#464895,#464903,#464911)); +#464826 = ORIENTED_EDGE('',*,*,#464827,.T.); +#464827 = EDGE_CURVE('',#464828,#464830,#464832,.T.); +#464828 = VERTEX_POINT('',#464829); +#464829 = CARTESIAN_POINT('',(151.412475,-139.761031,-7.5E-02)); +#464830 = VERTEX_POINT('',#464831); +#464831 = CARTESIAN_POINT('',(151.462475,-139.711031,-7.5E-02)); +#464832 = CIRCLE('',#464833,5.000014378934E-02); +#464833 = AXIS2_PLACEMENT_3D('',#464834,#464835,#464836); +#464834 = CARTESIAN_POINT('',(151.46247514378,-139.7610311437,-7.5E-02) + ); +#464835 = DIRECTION('',(0.,0.,-1.)); +#464836 = DIRECTION('',(-0.999999999996,2.875774186499E-06,0.)); +#464837 = ORIENTED_EDGE('',*,*,#464838,.T.); +#464838 = EDGE_CURVE('',#464830,#464839,#464841,.T.); +#464839 = VERTEX_POINT('',#464840); +#464840 = CARTESIAN_POINT('',(152.462475,-139.711031,-7.5E-02)); +#464841 = LINE('',#464842,#464843); +#464842 = CARTESIAN_POINT('',(151.462475,-139.711031,-7.5E-02)); +#464843 = VECTOR('',#464844,1.); +#464844 = DIRECTION('',(1.,0.,0.)); +#464845 = ORIENTED_EDGE('',*,*,#464846,.T.); +#464846 = EDGE_CURVE('',#464839,#464847,#464849,.T.); +#464847 = VERTEX_POINT('',#464848); +#464848 = CARTESIAN_POINT('',(152.462475,-139.811031,-7.5E-02)); +#464849 = CIRCLE('',#464850,5.000000000004E-02); +#464850 = AXIS2_PLACEMENT_3D('',#464851,#464852,#464853); +#464851 = CARTESIAN_POINT('',(152.46247495228,-139.761031,-7.5E-02)); +#464852 = DIRECTION('',(0.,0.,-1.)); +#464853 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#464854 = ORIENTED_EDGE('',*,*,#464855,.T.); +#464855 = EDGE_CURVE('',#464847,#464856,#464858,.T.); +#464856 = VERTEX_POINT('',#464857); +#464857 = CARTESIAN_POINT('',(152.036284,-139.811031,-7.5E-02)); +#464858 = LINE('',#464859,#464860); +#464859 = CARTESIAN_POINT('',(152.462475,-139.811031,-7.5E-02)); +#464860 = VECTOR('',#464861,1.); +#464861 = DIRECTION('',(-1.,0.,0.)); +#464862 = ORIENTED_EDGE('',*,*,#464863,.T.); +#464863 = EDGE_CURVE('',#464856,#464864,#464866,.T.); +#464864 = VERTEX_POINT('',#464865); +#464865 = CARTESIAN_POINT('',(152.034041,-140.153255,-7.5E-02)); +#464866 = LINE('',#464867,#464868); +#464867 = CARTESIAN_POINT('',(152.036284,-139.811031,-7.5E-02)); +#464868 = VECTOR('',#464869,1.); +#464869 = DIRECTION('',(-6.554045960721E-03,-0.99997852201,0.)); +#464870 = ORIENTED_EDGE('',*,*,#464871,.T.); +#464871 = EDGE_CURVE('',#464864,#464872,#464874,.T.); +#464872 = VERTEX_POINT('',#464873); +#464873 = CARTESIAN_POINT('',(151.97402,-140.272577,-7.5E-02)); +#464874 = LINE('',#464875,#464876); +#464875 = CARTESIAN_POINT('',(152.034041,-140.153255,-7.5E-02)); +#464876 = VECTOR('',#464877,1.); +#464877 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#464878 = ORIENTED_EDGE('',*,*,#464879,.T.); +#464879 = EDGE_CURVE('',#464872,#464880,#464882,.T.); +#464880 = VERTEX_POINT('',#464881); +#464881 = CARTESIAN_POINT('',(151.641678,-140.380216,-7.5E-02)); +#464882 = CIRCLE('',#464883,0.323555964925); +#464883 = AXIS2_PLACEMENT_3D('',#464884,#464885,#464886); +#464884 = CARTESIAN_POINT('',(151.72392926578,-140.0672891847,-7.5E-02) + ); +#464885 = DIRECTION('',(0.,0.,-1.)); +#464886 = DIRECTION('',(0.772944285767,-0.634473901039,0.)); +#464887 = ORIENTED_EDGE('',*,*,#464888,.T.); +#464888 = EDGE_CURVE('',#464880,#464889,#464891,.T.); +#464889 = VERTEX_POINT('',#464890); +#464890 = CARTESIAN_POINT('',(151.522357,-140.320195,-7.5E-02)); +#464891 = LINE('',#464892,#464893); +#464892 = CARTESIAN_POINT('',(151.641678,-140.380216,-7.5E-02)); +#464893 = VECTOR('',#464894,1.); +#464894 = DIRECTION('',(-0.893344973043,0.449371515718,0.)); +#464895 = ORIENTED_EDGE('',*,*,#464896,.T.); +#464896 = EDGE_CURVE('',#464889,#464897,#464899,.T.); +#464897 = VERTEX_POINT('',#464898); +#464898 = CARTESIAN_POINT('',(151.465372,-140.259581,-7.5E-02)); +#464899 = LINE('',#464900,#464901); +#464900 = CARTESIAN_POINT('',(151.522357,-140.320195,-7.5E-02)); +#464901 = VECTOR('',#464902,1.); +#464902 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#464903 = ORIENTED_EDGE('',*,*,#464904,.T.); +#464904 = EDGE_CURVE('',#464897,#464905,#464907,.T.); +#464905 = VERTEX_POINT('',#464906); +#464906 = CARTESIAN_POINT('',(151.414717,-140.153255,-7.5E-02)); +#464907 = LINE('',#464908,#464909); +#464908 = CARTESIAN_POINT('',(151.465372,-140.259581,-7.5E-02)); +#464909 = VECTOR('',#464910,1.); +#464910 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#464911 = ORIENTED_EDGE('',*,*,#464912,.T.); +#464912 = EDGE_CURVE('',#464905,#464828,#464913,.T.); +#464913 = LINE('',#464914,#464915); +#464914 = CARTESIAN_POINT('',(151.414717,-140.153255,-7.5E-02)); +#464915 = VECTOR('',#464916,1.); +#464916 = DIRECTION('',(-5.716028017892E-03,0.999983663378,0.)); +#464917 = FACE_BOUND('',#464918,.T.); +#464918 = EDGE_LOOP('',(#464919,#464930,#464938,#464946,#464954,#464963) + ); +#464919 = ORIENTED_EDGE('',*,*,#464920,.T.); +#464920 = EDGE_CURVE('',#464921,#464923,#464925,.T.); +#464921 = VERTEX_POINT('',#464922); +#464922 = CARTESIAN_POINT('',(151.784005,-140.282459,-7.5E-02)); +#464923 = VERTEX_POINT('',#464924); +#464924 = CARTESIAN_POINT('',(151.936284,-140.130179,-7.5E-02)); +#464925 = CIRCLE('',#464926,0.215065806118); +#464926 = AXIS2_PLACEMENT_3D('',#464927,#464928,#464929); +#464927 = CARTESIAN_POINT('',(151.72850293076,-140.0746782952,-7.5E-02) + ); +#464928 = DIRECTION('',(0.,0.,1.)); +#464929 = DIRECTION('',(0.258070170408,-0.966126175582,0.)); +#464930 = ORIENTED_EDGE('',*,*,#464931,.T.); +#464931 = EDGE_CURVE('',#464923,#464932,#464934,.T.); +#464932 = VERTEX_POINT('',#464933); +#464933 = CARTESIAN_POINT('',(151.936284,-139.811031,-7.5E-02)); +#464934 = LINE('',#464935,#464936); +#464935 = CARTESIAN_POINT('',(151.936284,-140.130179,-7.5E-02)); +#464936 = VECTOR('',#464937,1.); +#464937 = DIRECTION('',(0.,1.,0.)); +#464938 = ORIENTED_EDGE('',*,*,#464939,.T.); +#464939 = EDGE_CURVE('',#464932,#464940,#464942,.T.); +#464940 = VERTEX_POINT('',#464941); +#464941 = CARTESIAN_POINT('',(151.512475,-139.811031,-7.5E-02)); +#464942 = LINE('',#464943,#464944); +#464943 = CARTESIAN_POINT('',(151.936284,-139.811031,-7.5E-02)); +#464944 = VECTOR('',#464945,1.); +#464945 = DIRECTION('',(-1.,0.,0.)); +#464946 = ORIENTED_EDGE('',*,*,#464947,.T.); +#464947 = EDGE_CURVE('',#464940,#464948,#464950,.T.); +#464948 = VERTEX_POINT('',#464949); +#464949 = CARTESIAN_POINT('',(151.512475,-140.13018,-7.5E-02)); +#464950 = LINE('',#464951,#464952); +#464951 = CARTESIAN_POINT('',(151.512475,-139.811031,-7.5E-02)); +#464952 = VECTOR('',#464953,1.); +#464953 = DIRECTION('',(0.,-1.,0.)); +#464954 = ORIENTED_EDGE('',*,*,#464955,.T.); +#464955 = EDGE_CURVE('',#464948,#464956,#464958,.T.); +#464956 = VERTEX_POINT('',#464957); +#464957 = CARTESIAN_POINT('',(151.664755,-140.282459,-7.5E-02)); +#464958 = CIRCLE('',#464959,0.215060459698); +#464959 = AXIS2_PLACEMENT_3D('',#464960,#464961,#464962); +#464960 = CARTESIAN_POINT('',(151.72025133746,-140.074682298,-7.5E-02)); +#464961 = DIRECTION('',(0.,0.,1.)); +#464962 = DIRECTION('',(-0.966129886234,-0.258056278599,0.)); +#464963 = ORIENTED_EDGE('',*,*,#464964,.T.); +#464964 = EDGE_CURVE('',#464956,#464921,#464965,.T.); +#464965 = LINE('',#464966,#464967); +#464966 = CARTESIAN_POINT('',(151.664755,-140.282459,-7.5E-02)); +#464967 = VECTOR('',#464968,1.); +#464968 = DIRECTION('',(1.,0.,0.)); +#464969 = PLANE('',#464970); +#464970 = AXIS2_PLACEMENT_3D('',#464971,#464972,#464973); +#464971 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#464972 = DIRECTION('',(-0.,-0.,-1.)); +#464973 = DIRECTION('',(-1.,0.,0.)); +#464974 = SHELL_BASED_SURFACE_MODEL('',(#464975)); +#464975 = OPEN_SHELL('',(#464976)); +#464976 = ADVANCED_FACE('',(#464977),#465035,.T.); +#464977 = FACE_BOUND('',#464978,.T.); +#464978 = EDGE_LOOP('',(#464979,#464989,#464997,#465005,#465013,#465021, + #465029)); +#464979 = ORIENTED_EDGE('',*,*,#464980,.T.); +#464980 = EDGE_CURVE('',#464981,#464983,#464985,.T.); +#464981 = VERTEX_POINT('',#464982); +#464982 = CARTESIAN_POINT('',(132.315501,-139.884499,-7.5E-02)); +#464983 = VERTEX_POINT('',#464984); +#464984 = CARTESIAN_POINT('',(132.315501,-139.596408,-7.5E-02)); +#464985 = LINE('',#464986,#464987); +#464986 = CARTESIAN_POINT('',(132.315501,-139.884499,-7.5E-02)); +#464987 = VECTOR('',#464988,1.); +#464988 = DIRECTION('',(0.,1.,0.)); +#464989 = ORIENTED_EDGE('',*,*,#464990,.T.); +#464990 = EDGE_CURVE('',#464983,#464991,#464993,.T.); +#464991 = VERTEX_POINT('',#464992); +#464992 = CARTESIAN_POINT('',(132.603592,-139.596408,-7.5E-02)); +#464993 = LINE('',#464994,#464995); +#464994 = CARTESIAN_POINT('',(132.315501,-139.596408,-7.5E-02)); +#464995 = VECTOR('',#464996,1.); +#464996 = DIRECTION('',(1.,0.,0.)); +#464997 = ORIENTED_EDGE('',*,*,#464998,.T.); +#464998 = EDGE_CURVE('',#464991,#464999,#465001,.T.); +#464999 = VERTEX_POINT('',#465000); +#465000 = CARTESIAN_POINT('',(132.603592,-139.884499,-7.5E-02)); +#465001 = LINE('',#465002,#465003); +#465002 = CARTESIAN_POINT('',(132.603592,-139.596408,-7.5E-02)); +#465003 = VECTOR('',#465004,1.); +#465004 = DIRECTION('',(0.,-1.,0.)); +#465005 = ORIENTED_EDGE('',*,*,#465006,.T.); +#465006 = EDGE_CURVE('',#464999,#465007,#465009,.T.); +#465007 = VERTEX_POINT('',#465008); +#465008 = CARTESIAN_POINT('',(132.603592,-140.17259,-7.5E-02)); +#465009 = LINE('',#465010,#465011); +#465010 = CARTESIAN_POINT('',(132.603592,-139.884499,-7.5E-02)); +#465011 = VECTOR('',#465012,1.); +#465012 = DIRECTION('',(0.,-1.,0.)); +#465013 = ORIENTED_EDGE('',*,*,#465014,.T.); +#465014 = EDGE_CURVE('',#465007,#465015,#465017,.T.); +#465015 = VERTEX_POINT('',#465016); +#465016 = CARTESIAN_POINT('',(132.02741,-140.17259,-7.5E-02)); +#465017 = LINE('',#465018,#465019); +#465018 = CARTESIAN_POINT('',(132.603592,-140.17259,-7.5E-02)); +#465019 = VECTOR('',#465020,1.); +#465020 = DIRECTION('',(-1.,0.,0.)); +#465021 = ORIENTED_EDGE('',*,*,#465022,.T.); +#465022 = EDGE_CURVE('',#465015,#465023,#465025,.T.); +#465023 = VERTEX_POINT('',#465024); +#465024 = CARTESIAN_POINT('',(132.02741,-139.884499,-7.5E-02)); +#465025 = LINE('',#465026,#465027); +#465026 = CARTESIAN_POINT('',(132.02741,-140.17259,-7.5E-02)); +#465027 = VECTOR('',#465028,1.); +#465028 = DIRECTION('',(0.,1.,0.)); +#465029 = ORIENTED_EDGE('',*,*,#465030,.T.); +#465030 = EDGE_CURVE('',#465023,#464981,#465031,.T.); +#465031 = LINE('',#465032,#465033); +#465032 = CARTESIAN_POINT('',(132.02741,-139.884499,-7.5E-02)); +#465033 = VECTOR('',#465034,1.); +#465034 = DIRECTION('',(1.,0.,0.)); +#465035 = PLANE('',#465036); +#465036 = AXIS2_PLACEMENT_3D('',#465037,#465038,#465039); +#465037 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465038 = DIRECTION('',(-0.,-0.,-1.)); +#465039 = DIRECTION('',(-1.,0.,0.)); +#465040 = SHELL_BASED_SURFACE_MODEL('',(#465041)); +#465041 = OPEN_SHELL('',(#465042)); +#465042 = ADVANCED_FACE('',(#465043),#465085,.T.); +#465043 = FACE_BOUND('',#465044,.T.); +#465044 = EDGE_LOOP('',(#465045,#465055,#465063,#465071,#465079)); +#465045 = ORIENTED_EDGE('',*,*,#465046,.T.); +#465046 = EDGE_CURVE('',#465047,#465049,#465051,.T.); +#465047 = VERTEX_POINT('',#465048); +#465048 = CARTESIAN_POINT('',(134.044046,-140.17259,-7.5E-02)); +#465049 = VERTEX_POINT('',#465050); +#465050 = CARTESIAN_POINT('',(134.044046,-139.884499,-7.5E-02)); +#465051 = LINE('',#465052,#465053); +#465052 = CARTESIAN_POINT('',(134.044046,-140.17259,-7.5E-02)); +#465053 = VECTOR('',#465054,1.); +#465054 = DIRECTION('',(0.,1.,0.)); +#465055 = ORIENTED_EDGE('',*,*,#465056,.T.); +#465056 = EDGE_CURVE('',#465049,#465057,#465059,.T.); +#465057 = VERTEX_POINT('',#465058); +#465058 = CARTESIAN_POINT('',(134.332136,-139.884499,-7.5E-02)); +#465059 = LINE('',#465060,#465061); +#465060 = CARTESIAN_POINT('',(134.044046,-139.884499,-7.5E-02)); +#465061 = VECTOR('',#465062,1.); +#465062 = DIRECTION('',(1.,0.,0.)); +#465063 = ORIENTED_EDGE('',*,*,#465064,.T.); +#465064 = EDGE_CURVE('',#465057,#465065,#465067,.T.); +#465065 = VERTEX_POINT('',#465066); +#465066 = CARTESIAN_POINT('',(134.332136,-140.028544,-7.5E-02)); +#465067 = LINE('',#465068,#465069); +#465068 = CARTESIAN_POINT('',(134.332136,-139.884499,-7.5E-02)); +#465069 = VECTOR('',#465070,1.); +#465070 = DIRECTION('',(0.,-1.,0.)); +#465071 = ORIENTED_EDGE('',*,*,#465072,.T.); +#465072 = EDGE_CURVE('',#465065,#465073,#465075,.T.); +#465073 = VERTEX_POINT('',#465074); +#465074 = CARTESIAN_POINT('',(134.332136,-140.17259,-7.5E-02)); +#465075 = LINE('',#465076,#465077); +#465076 = CARTESIAN_POINT('',(134.332136,-140.028544,-7.5E-02)); +#465077 = VECTOR('',#465078,1.); +#465078 = DIRECTION('',(0.,-1.,0.)); +#465079 = ORIENTED_EDGE('',*,*,#465080,.T.); +#465080 = EDGE_CURVE('',#465073,#465047,#465081,.T.); +#465081 = LINE('',#465082,#465083); +#465082 = CARTESIAN_POINT('',(134.332136,-140.17259,-7.5E-02)); +#465083 = VECTOR('',#465084,1.); +#465084 = DIRECTION('',(-1.,0.,0.)); +#465085 = PLANE('',#465086); +#465086 = AXIS2_PLACEMENT_3D('',#465087,#465088,#465089); +#465087 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465088 = DIRECTION('',(-0.,-0.,-1.)); +#465089 = DIRECTION('',(-1.,0.,0.)); +#465090 = SHELL_BASED_SURFACE_MODEL('',(#465091)); +#465091 = OPEN_SHELL('',(#465092)); +#465092 = ADVANCED_FACE('',(#465093),#465135,.T.); +#465093 = FACE_BOUND('',#465094,.T.); +#465094 = EDGE_LOOP('',(#465095,#465105,#465113,#465121,#465129)); +#465095 = ORIENTED_EDGE('',*,*,#465096,.T.); +#465096 = EDGE_CURVE('',#465097,#465099,#465101,.T.); +#465097 = VERTEX_POINT('',#465098); +#465098 = CARTESIAN_POINT('',(134.908318,-140.17259,-7.5E-02)); +#465099 = VERTEX_POINT('',#465100); +#465100 = CARTESIAN_POINT('',(134.908318,-139.884499,-7.5E-02)); +#465101 = LINE('',#465102,#465103); +#465102 = CARTESIAN_POINT('',(134.908318,-140.17259,-7.5E-02)); +#465103 = VECTOR('',#465104,1.); +#465104 = DIRECTION('',(0.,1.,0.)); +#465105 = ORIENTED_EDGE('',*,*,#465106,.T.); +#465106 = EDGE_CURVE('',#465099,#465107,#465109,.T.); +#465107 = VERTEX_POINT('',#465108); +#465108 = CARTESIAN_POINT('',(135.196408,-139.884499,-7.5E-02)); +#465109 = LINE('',#465110,#465111); +#465110 = CARTESIAN_POINT('',(134.908318,-139.884499,-7.5E-02)); +#465111 = VECTOR('',#465112,1.); +#465112 = DIRECTION('',(1.,0.,0.)); +#465113 = ORIENTED_EDGE('',*,*,#465114,.T.); +#465114 = EDGE_CURVE('',#465107,#465115,#465117,.T.); +#465115 = VERTEX_POINT('',#465116); +#465116 = CARTESIAN_POINT('',(135.196408,-140.028544,-7.5E-02)); +#465117 = LINE('',#465118,#465119); +#465118 = CARTESIAN_POINT('',(135.196408,-139.884499,-7.5E-02)); +#465119 = VECTOR('',#465120,1.); +#465120 = DIRECTION('',(0.,-1.,0.)); +#465121 = ORIENTED_EDGE('',*,*,#465122,.T.); +#465122 = EDGE_CURVE('',#465115,#465123,#465125,.T.); +#465123 = VERTEX_POINT('',#465124); +#465124 = CARTESIAN_POINT('',(135.196408,-140.17259,-7.5E-02)); +#465125 = LINE('',#465126,#465127); +#465126 = CARTESIAN_POINT('',(135.196408,-140.028544,-7.5E-02)); +#465127 = VECTOR('',#465128,1.); +#465128 = DIRECTION('',(0.,-1.,0.)); +#465129 = ORIENTED_EDGE('',*,*,#465130,.T.); +#465130 = EDGE_CURVE('',#465123,#465097,#465131,.T.); +#465131 = LINE('',#465132,#465133); +#465132 = CARTESIAN_POINT('',(135.196408,-140.17259,-7.5E-02)); +#465133 = VECTOR('',#465134,1.); +#465134 = DIRECTION('',(-1.,0.,0.)); +#465135 = PLANE('',#465136); +#465136 = AXIS2_PLACEMENT_3D('',#465137,#465138,#465139); +#465137 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465138 = DIRECTION('',(-0.,-0.,-1.)); +#465139 = DIRECTION('',(-1.,0.,0.)); +#465140 = SHELL_BASED_SURFACE_MODEL('',(#465141)); +#465141 = OPEN_SHELL('',(#465142)); +#465142 = ADVANCED_FACE('',(#465143),#465185,.T.); +#465143 = FACE_BOUND('',#465144,.T.); +#465144 = EDGE_LOOP('',(#465145,#465155,#465163,#465171,#465179)); +#465145 = ORIENTED_EDGE('',*,*,#465146,.T.); +#465146 = EDGE_CURVE('',#465147,#465149,#465151,.T.); +#465147 = VERTEX_POINT('',#465148); +#465148 = CARTESIAN_POINT('',(137.213044,-140.17259,-7.5E-02)); +#465149 = VERTEX_POINT('',#465150); +#465150 = CARTESIAN_POINT('',(137.213044,-139.884499,-7.5E-02)); +#465151 = LINE('',#465152,#465153); +#465152 = CARTESIAN_POINT('',(137.213044,-140.17259,-7.5E-02)); +#465153 = VECTOR('',#465154,1.); +#465154 = DIRECTION('',(0.,1.,0.)); +#465155 = ORIENTED_EDGE('',*,*,#465156,.T.); +#465156 = EDGE_CURVE('',#465149,#465157,#465159,.T.); +#465157 = VERTEX_POINT('',#465158); +#465158 = CARTESIAN_POINT('',(137.501134,-139.884499,-7.5E-02)); +#465159 = LINE('',#465160,#465161); +#465160 = CARTESIAN_POINT('',(137.213044,-139.884499,-7.5E-02)); +#465161 = VECTOR('',#465162,1.); +#465162 = DIRECTION('',(1.,0.,0.)); +#465163 = ORIENTED_EDGE('',*,*,#465164,.T.); +#465164 = EDGE_CURVE('',#465157,#465165,#465167,.T.); +#465165 = VERTEX_POINT('',#465166); +#465166 = CARTESIAN_POINT('',(137.501134,-140.028544,-7.5E-02)); +#465167 = LINE('',#465168,#465169); +#465168 = CARTESIAN_POINT('',(137.501134,-139.884499,-7.5E-02)); +#465169 = VECTOR('',#465170,1.); +#465170 = DIRECTION('',(0.,-1.,0.)); +#465171 = ORIENTED_EDGE('',*,*,#465172,.T.); +#465172 = EDGE_CURVE('',#465165,#465173,#465175,.T.); +#465173 = VERTEX_POINT('',#465174); +#465174 = CARTESIAN_POINT('',(137.501134,-140.17259,-7.5E-02)); +#465175 = LINE('',#465176,#465177); +#465176 = CARTESIAN_POINT('',(137.501134,-140.028544,-7.5E-02)); +#465177 = VECTOR('',#465178,1.); +#465178 = DIRECTION('',(0.,-1.,0.)); +#465179 = ORIENTED_EDGE('',*,*,#465180,.T.); +#465180 = EDGE_CURVE('',#465173,#465147,#465181,.T.); +#465181 = LINE('',#465182,#465183); +#465182 = CARTESIAN_POINT('',(137.501134,-140.17259,-7.5E-02)); +#465183 = VECTOR('',#465184,1.); +#465184 = DIRECTION('',(-1.,0.,0.)); +#465185 = PLANE('',#465186); +#465186 = AXIS2_PLACEMENT_3D('',#465187,#465188,#465189); +#465187 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465188 = DIRECTION('',(-0.,-0.,-1.)); +#465189 = DIRECTION('',(-1.,0.,0.)); +#465190 = SHELL_BASED_SURFACE_MODEL('',(#465191)); +#465191 = OPEN_SHELL('',(#465192)); +#465192 = ADVANCED_FACE('',(#465193),#465235,.T.); +#465193 = FACE_BOUND('',#465194,.T.); +#465194 = EDGE_LOOP('',(#465195,#465205,#465213,#465221,#465229)); +#465195 = ORIENTED_EDGE('',*,*,#465196,.T.); +#465196 = EDGE_CURVE('',#465197,#465199,#465201,.T.); +#465197 = VERTEX_POINT('',#465198); +#465198 = CARTESIAN_POINT('',(132.891683,-139.884499,-7.5E-02)); +#465199 = VERTEX_POINT('',#465200); +#465200 = CARTESIAN_POINT('',(132.891683,-139.596408,-7.5E-02)); +#465201 = LINE('',#465202,#465203); +#465202 = CARTESIAN_POINT('',(132.891683,-139.884499,-7.5E-02)); +#465203 = VECTOR('',#465204,1.); +#465204 = DIRECTION('',(0.,1.,0.)); +#465205 = ORIENTED_EDGE('',*,*,#465206,.T.); +#465206 = EDGE_CURVE('',#465199,#465207,#465209,.T.); +#465207 = VERTEX_POINT('',#465208); +#465208 = CARTESIAN_POINT('',(133.179773,-139.596408,-7.5E-02)); +#465209 = LINE('',#465210,#465211); +#465210 = CARTESIAN_POINT('',(132.891683,-139.596408,-7.5E-02)); +#465211 = VECTOR('',#465212,1.); +#465212 = DIRECTION('',(1.,0.,0.)); +#465213 = ORIENTED_EDGE('',*,*,#465214,.T.); +#465214 = EDGE_CURVE('',#465207,#465215,#465217,.T.); +#465215 = VERTEX_POINT('',#465216); +#465216 = CARTESIAN_POINT('',(133.179773,-139.740454,-7.5E-02)); +#465217 = LINE('',#465218,#465219); +#465218 = CARTESIAN_POINT('',(133.179773,-139.596408,-7.5E-02)); +#465219 = VECTOR('',#465220,1.); +#465220 = DIRECTION('',(0.,-1.,0.)); +#465221 = ORIENTED_EDGE('',*,*,#465222,.T.); +#465222 = EDGE_CURVE('',#465215,#465223,#465225,.T.); +#465223 = VERTEX_POINT('',#465224); +#465224 = CARTESIAN_POINT('',(133.179773,-139.884499,-7.5E-02)); +#465225 = LINE('',#465226,#465227); +#465226 = CARTESIAN_POINT('',(133.179773,-139.740454,-7.5E-02)); +#465227 = VECTOR('',#465228,1.); +#465228 = DIRECTION('',(0.,-1.,0.)); +#465229 = ORIENTED_EDGE('',*,*,#465230,.T.); +#465230 = EDGE_CURVE('',#465223,#465197,#465231,.T.); +#465231 = LINE('',#465232,#465233); +#465232 = CARTESIAN_POINT('',(133.179773,-139.884499,-7.5E-02)); +#465233 = VECTOR('',#465234,1.); +#465234 = DIRECTION('',(-1.,0.,0.)); +#465235 = PLANE('',#465236); +#465236 = AXIS2_PLACEMENT_3D('',#465237,#465238,#465239); +#465237 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465238 = DIRECTION('',(-0.,-0.,-1.)); +#465239 = DIRECTION('',(-1.,0.,0.)); +#465240 = SHELL_BASED_SURFACE_MODEL('',(#465241)); +#465241 = OPEN_SHELL('',(#465242)); +#465242 = ADVANCED_FACE('',(#465243,#465607),#465641,.T.); +#465243 = FACE_BOUND('',#465244,.T.); +#465244 = EDGE_LOOP('',(#465245,#465255,#465263,#465271,#465279,#465287, + #465295,#465303,#465309,#465317,#465325,#465333,#465341,#465349, + #465355,#465363,#465371,#465379,#465387,#465395,#465401,#465409, + #465417,#465425,#465433,#465441,#465449,#465457,#465465,#465473, + #465481,#465489,#465497,#465505,#465513,#465521,#465529,#465537, + #465545,#465553,#465561,#465569,#465577,#465585,#465593,#465601)); +#465245 = ORIENTED_EDGE('',*,*,#465246,.T.); +#465246 = EDGE_CURVE('',#465247,#465249,#465251,.T.); +#465247 = VERTEX_POINT('',#465248); +#465248 = CARTESIAN_POINT('',(133.755955,-138.155954,-7.5E-02)); +#465249 = VERTEX_POINT('',#465250); +#465250 = CARTESIAN_POINT('',(133.755955,-137.867864,-7.5E-02)); +#465251 = LINE('',#465252,#465253); +#465252 = CARTESIAN_POINT('',(133.755955,-138.155954,-7.5E-02)); +#465253 = VECTOR('',#465254,1.); +#465254 = DIRECTION('',(0.,1.,0.)); +#465255 = ORIENTED_EDGE('',*,*,#465256,.T.); +#465256 = EDGE_CURVE('',#465249,#465257,#465259,.T.); +#465257 = VERTEX_POINT('',#465258); +#465258 = CARTESIAN_POINT('',(134.044046,-137.867864,-7.5E-02)); +#465259 = LINE('',#465260,#465261); +#465260 = CARTESIAN_POINT('',(133.755955,-137.867864,-7.5E-02)); +#465261 = VECTOR('',#465262,1.); +#465262 = DIRECTION('',(1.,0.,0.)); +#465263 = ORIENTED_EDGE('',*,*,#465264,.T.); +#465264 = EDGE_CURVE('',#465257,#465265,#465267,.T.); +#465265 = VERTEX_POINT('',#465266); +#465266 = CARTESIAN_POINT('',(134.044046,-138.155954,-7.5E-02)); +#465267 = LINE('',#465268,#465269); +#465268 = CARTESIAN_POINT('',(134.044046,-137.867864,-7.5E-02)); +#465269 = VECTOR('',#465270,1.); +#465270 = DIRECTION('',(0.,-1.,0.)); +#465271 = ORIENTED_EDGE('',*,*,#465272,.T.); +#465272 = EDGE_CURVE('',#465265,#465273,#465275,.T.); +#465273 = VERTEX_POINT('',#465274); +#465274 = CARTESIAN_POINT('',(134.332136,-138.155954,-7.5E-02)); +#465275 = LINE('',#465276,#465277); +#465276 = CARTESIAN_POINT('',(134.044046,-138.155954,-7.5E-02)); +#465277 = VECTOR('',#465278,1.); +#465278 = DIRECTION('',(1.,0.,0.)); +#465279 = ORIENTED_EDGE('',*,*,#465280,.T.); +#465280 = EDGE_CURVE('',#465273,#465281,#465283,.T.); +#465281 = VERTEX_POINT('',#465282); +#465282 = CARTESIAN_POINT('',(134.332136,-137.867864,-7.5E-02)); +#465283 = LINE('',#465284,#465285); +#465284 = CARTESIAN_POINT('',(134.332136,-138.155954,-7.5E-02)); +#465285 = VECTOR('',#465286,1.); +#465286 = DIRECTION('',(0.,1.,0.)); +#465287 = ORIENTED_EDGE('',*,*,#465288,.T.); +#465288 = EDGE_CURVE('',#465281,#465289,#465291,.T.); +#465289 = VERTEX_POINT('',#465290); +#465290 = CARTESIAN_POINT('',(134.620227,-137.867864,-7.5E-02)); +#465291 = LINE('',#465292,#465293); +#465292 = CARTESIAN_POINT('',(134.332136,-137.867864,-7.5E-02)); +#465293 = VECTOR('',#465294,1.); +#465294 = DIRECTION('',(1.,0.,0.)); +#465295 = ORIENTED_EDGE('',*,*,#465296,.T.); +#465296 = EDGE_CURVE('',#465289,#465297,#465299,.T.); +#465297 = VERTEX_POINT('',#465298); +#465298 = CARTESIAN_POINT('',(134.620227,-138.155954,-7.5E-02)); +#465299 = LINE('',#465300,#465301); +#465300 = CARTESIAN_POINT('',(134.620227,-137.867864,-7.5E-02)); +#465301 = VECTOR('',#465302,1.); +#465302 = DIRECTION('',(0.,-1.,0.)); +#465303 = ORIENTED_EDGE('',*,*,#465304,.T.); +#465304 = EDGE_CURVE('',#465297,#465273,#465305,.T.); +#465305 = LINE('',#465306,#465307); +#465306 = CARTESIAN_POINT('',(134.620227,-138.155954,-7.5E-02)); +#465307 = VECTOR('',#465308,1.); +#465308 = DIRECTION('',(-1.,0.,0.)); +#465309 = ORIENTED_EDGE('',*,*,#465310,.T.); +#465310 = EDGE_CURVE('',#465273,#465311,#465313,.T.); +#465311 = VERTEX_POINT('',#465312); +#465312 = CARTESIAN_POINT('',(134.332136,-138.444045,-7.5E-02)); +#465313 = LINE('',#465314,#465315); +#465314 = CARTESIAN_POINT('',(134.332136,-138.155954,-7.5E-02)); +#465315 = VECTOR('',#465316,1.); +#465316 = DIRECTION('',(0.,-1.,0.)); +#465317 = ORIENTED_EDGE('',*,*,#465318,.T.); +#465318 = EDGE_CURVE('',#465311,#465319,#465321,.T.); +#465319 = VERTEX_POINT('',#465320); +#465320 = CARTESIAN_POINT('',(134.908318,-138.444045,-7.5E-02)); +#465321 = LINE('',#465322,#465323); +#465322 = CARTESIAN_POINT('',(134.332136,-138.444045,-7.5E-02)); +#465323 = VECTOR('',#465324,1.); +#465324 = DIRECTION('',(1.,0.,0.)); +#465325 = ORIENTED_EDGE('',*,*,#465326,.T.); +#465326 = EDGE_CURVE('',#465319,#465327,#465329,.T.); +#465327 = VERTEX_POINT('',#465328); +#465328 = CARTESIAN_POINT('',(134.908318,-138.155954,-7.5E-02)); +#465329 = LINE('',#465330,#465331); +#465330 = CARTESIAN_POINT('',(134.908318,-138.444045,-7.5E-02)); +#465331 = VECTOR('',#465332,1.); +#465332 = DIRECTION('',(0.,1.,0.)); +#465333 = ORIENTED_EDGE('',*,*,#465334,.T.); +#465334 = EDGE_CURVE('',#465327,#465335,#465337,.T.); +#465335 = VERTEX_POINT('',#465336); +#465336 = CARTESIAN_POINT('',(135.196408,-138.155954,-7.5E-02)); +#465337 = LINE('',#465338,#465339); +#465338 = CARTESIAN_POINT('',(134.908318,-138.155954,-7.5E-02)); +#465339 = VECTOR('',#465340,1.); +#465340 = DIRECTION('',(1.,0.,0.)); +#465341 = ORIENTED_EDGE('',*,*,#465342,.T.); +#465342 = EDGE_CURVE('',#465335,#465343,#465345,.T.); +#465343 = VERTEX_POINT('',#465344); +#465344 = CARTESIAN_POINT('',(135.196408,-138.444045,-7.5E-02)); +#465345 = LINE('',#465346,#465347); +#465346 = CARTESIAN_POINT('',(135.196408,-138.155954,-7.5E-02)); +#465347 = VECTOR('',#465348,1.); +#465348 = DIRECTION('',(0.,-1.,0.)); +#465349 = ORIENTED_EDGE('',*,*,#465350,.T.); +#465350 = EDGE_CURVE('',#465343,#465319,#465351,.T.); +#465351 = LINE('',#465352,#465353); +#465352 = CARTESIAN_POINT('',(135.196408,-138.444045,-7.5E-02)); +#465353 = VECTOR('',#465354,1.); +#465354 = DIRECTION('',(-1.,0.,0.)); +#465355 = ORIENTED_EDGE('',*,*,#465356,.T.); +#465356 = EDGE_CURVE('',#465319,#465357,#465359,.T.); +#465357 = VERTEX_POINT('',#465358); +#465358 = CARTESIAN_POINT('',(134.908318,-138.732136,-7.5E-02)); +#465359 = LINE('',#465360,#465361); +#465360 = CARTESIAN_POINT('',(134.908318,-138.444045,-7.5E-02)); +#465361 = VECTOR('',#465362,1.); +#465362 = DIRECTION('',(0.,-1.,0.)); +#465363 = ORIENTED_EDGE('',*,*,#465364,.T.); +#465364 = EDGE_CURVE('',#465357,#465365,#465367,.T.); +#465365 = VERTEX_POINT('',#465366); +#465366 = CARTESIAN_POINT('',(135.77259,-138.732136,-7.5E-02)); +#465367 = LINE('',#465368,#465369); +#465368 = CARTESIAN_POINT('',(134.908318,-138.732136,-7.5E-02)); +#465369 = VECTOR('',#465370,1.); +#465370 = DIRECTION('',(1.,0.,0.)); +#465371 = ORIENTED_EDGE('',*,*,#465372,.T.); +#465372 = EDGE_CURVE('',#465365,#465373,#465375,.T.); +#465373 = VERTEX_POINT('',#465374); +#465374 = CARTESIAN_POINT('',(135.77259,-138.155954,-7.5E-02)); +#465375 = LINE('',#465376,#465377); +#465376 = CARTESIAN_POINT('',(135.77259,-138.732136,-7.5E-02)); +#465377 = VECTOR('',#465378,1.); +#465378 = DIRECTION('',(0.,1.,0.)); +#465379 = ORIENTED_EDGE('',*,*,#465380,.T.); +#465380 = EDGE_CURVE('',#465373,#465381,#465383,.T.); +#465381 = VERTEX_POINT('',#465382); +#465382 = CARTESIAN_POINT('',(136.060681,-138.155954,-7.5E-02)); +#465383 = LINE('',#465384,#465385); +#465384 = CARTESIAN_POINT('',(135.77259,-138.155954,-7.5E-02)); +#465385 = VECTOR('',#465386,1.); +#465386 = DIRECTION('',(1.,0.,0.)); +#465387 = ORIENTED_EDGE('',*,*,#465388,.T.); +#465388 = EDGE_CURVE('',#465381,#465389,#465391,.T.); +#465389 = VERTEX_POINT('',#465390); +#465390 = CARTESIAN_POINT('',(136.060681,-138.732136,-7.5E-02)); +#465391 = LINE('',#465392,#465393); +#465392 = CARTESIAN_POINT('',(136.060681,-138.155954,-7.5E-02)); +#465393 = VECTOR('',#465394,1.); +#465394 = DIRECTION('',(0.,-1.,0.)); +#465395 = ORIENTED_EDGE('',*,*,#465396,.T.); +#465396 = EDGE_CURVE('',#465389,#465365,#465397,.T.); +#465397 = LINE('',#465398,#465399); +#465398 = CARTESIAN_POINT('',(136.060681,-138.732136,-7.5E-02)); +#465399 = VECTOR('',#465400,1.); +#465400 = DIRECTION('',(-1.,0.,0.)); +#465401 = ORIENTED_EDGE('',*,*,#465402,.T.); +#465402 = EDGE_CURVE('',#465365,#465403,#465405,.T.); +#465403 = VERTEX_POINT('',#465404); +#465404 = CARTESIAN_POINT('',(135.77259,-139.020227,-7.5E-02)); +#465405 = LINE('',#465406,#465407); +#465406 = CARTESIAN_POINT('',(135.77259,-138.732136,-7.5E-02)); +#465407 = VECTOR('',#465408,1.); +#465408 = DIRECTION('',(0.,-1.,0.)); +#465409 = ORIENTED_EDGE('',*,*,#465410,.T.); +#465410 = EDGE_CURVE('',#465403,#465411,#465413,.T.); +#465411 = VERTEX_POINT('',#465412); +#465412 = CARTESIAN_POINT('',(135.484499,-139.020227,-7.5E-02)); +#465413 = LINE('',#465414,#465415); +#465414 = CARTESIAN_POINT('',(135.77259,-139.020227,-7.5E-02)); +#465415 = VECTOR('',#465416,1.); +#465416 = DIRECTION('',(-1.,0.,0.)); +#465417 = ORIENTED_EDGE('',*,*,#465418,.T.); +#465418 = EDGE_CURVE('',#465411,#465419,#465421,.T.); +#465419 = VERTEX_POINT('',#465420); +#465420 = CARTESIAN_POINT('',(135.484499,-139.308317,-7.5E-02)); +#465421 = LINE('',#465422,#465423); +#465422 = CARTESIAN_POINT('',(135.484499,-139.020227,-7.5E-02)); +#465423 = VECTOR('',#465424,1.); +#465424 = DIRECTION('',(0.,-1.,0.)); +#465425 = ORIENTED_EDGE('',*,*,#465426,.T.); +#465426 = EDGE_CURVE('',#465419,#465427,#465429,.T.); +#465427 = VERTEX_POINT('',#465428); +#465428 = CARTESIAN_POINT('',(135.77259,-139.308317,-7.5E-02)); +#465429 = LINE('',#465430,#465431); +#465430 = CARTESIAN_POINT('',(135.484499,-139.308317,-7.5E-02)); +#465431 = VECTOR('',#465432,1.); +#465432 = DIRECTION('',(1.,0.,0.)); +#465433 = ORIENTED_EDGE('',*,*,#465434,.T.); +#465434 = EDGE_CURVE('',#465427,#465435,#465437,.T.); +#465435 = VERTEX_POINT('',#465436); +#465436 = CARTESIAN_POINT('',(135.77259,-139.596408,-7.5E-02)); +#465437 = LINE('',#465438,#465439); +#465438 = CARTESIAN_POINT('',(135.77259,-139.308317,-7.5E-02)); +#465439 = VECTOR('',#465440,1.); +#465440 = DIRECTION('',(0.,-1.,0.)); +#465441 = ORIENTED_EDGE('',*,*,#465442,.T.); +#465442 = EDGE_CURVE('',#465435,#465443,#465445,.T.); +#465443 = VERTEX_POINT('',#465444); +#465444 = CARTESIAN_POINT('',(135.484499,-139.596408,-7.5E-02)); +#465445 = LINE('',#465446,#465447); +#465446 = CARTESIAN_POINT('',(135.77259,-139.596408,-7.5E-02)); +#465447 = VECTOR('',#465448,1.); +#465448 = DIRECTION('',(-1.,0.,0.)); +#465449 = ORIENTED_EDGE('',*,*,#465450,.T.); +#465450 = EDGE_CURVE('',#465443,#465451,#465453,.T.); +#465451 = VERTEX_POINT('',#465452); +#465452 = CARTESIAN_POINT('',(135.484499,-139.884499,-7.5E-02)); +#465453 = LINE('',#465454,#465455); +#465454 = CARTESIAN_POINT('',(135.484499,-139.596408,-7.5E-02)); +#465455 = VECTOR('',#465456,1.); +#465456 = DIRECTION('',(0.,-1.,0.)); +#465457 = ORIENTED_EDGE('',*,*,#465458,.T.); +#465458 = EDGE_CURVE('',#465451,#465459,#465461,.T.); +#465459 = VERTEX_POINT('',#465460); +#465460 = CARTESIAN_POINT('',(135.196408,-139.884499,-7.5E-02)); +#465461 = LINE('',#465462,#465463); +#465462 = CARTESIAN_POINT('',(135.484499,-139.884499,-7.5E-02)); +#465463 = VECTOR('',#465464,1.); +#465464 = DIRECTION('',(-1.,0.,0.)); +#465465 = ORIENTED_EDGE('',*,*,#465466,.T.); +#465466 = EDGE_CURVE('',#465459,#465467,#465469,.T.); +#465467 = VERTEX_POINT('',#465468); +#465468 = CARTESIAN_POINT('',(135.196408,-139.308317,-7.5E-02)); +#465469 = LINE('',#465470,#465471); +#465470 = CARTESIAN_POINT('',(135.196408,-139.884499,-7.5E-02)); +#465471 = VECTOR('',#465472,1.); +#465472 = DIRECTION('',(0.,1.,0.)); +#465473 = ORIENTED_EDGE('',*,*,#465474,.T.); +#465474 = EDGE_CURVE('',#465467,#465475,#465477,.T.); +#465475 = VERTEX_POINT('',#465476); +#465476 = CARTESIAN_POINT('',(134.908318,-139.308317,-7.5E-02)); +#465477 = LINE('',#465478,#465479); +#465478 = CARTESIAN_POINT('',(135.196408,-139.308317,-7.5E-02)); +#465479 = VECTOR('',#465480,1.); +#465480 = DIRECTION('',(-1.,0.,0.)); +#465481 = ORIENTED_EDGE('',*,*,#465482,.T.); +#465482 = EDGE_CURVE('',#465475,#465483,#465485,.T.); +#465483 = VERTEX_POINT('',#465484); +#465484 = CARTESIAN_POINT('',(134.908318,-139.596408,-7.5E-02)); +#465485 = LINE('',#465486,#465487); +#465486 = CARTESIAN_POINT('',(134.908318,-139.308317,-7.5E-02)); +#465487 = VECTOR('',#465488,1.); +#465488 = DIRECTION('',(0.,-1.,0.)); +#465489 = ORIENTED_EDGE('',*,*,#465490,.T.); +#465490 = EDGE_CURVE('',#465483,#465491,#465493,.T.); +#465491 = VERTEX_POINT('',#465492); +#465492 = CARTESIAN_POINT('',(134.620227,-139.596408,-7.5E-02)); +#465493 = LINE('',#465494,#465495); +#465494 = CARTESIAN_POINT('',(134.908318,-139.596408,-7.5E-02)); +#465495 = VECTOR('',#465496,1.); +#465496 = DIRECTION('',(-1.,0.,0.)); +#465497 = ORIENTED_EDGE('',*,*,#465498,.T.); +#465498 = EDGE_CURVE('',#465491,#465499,#465501,.T.); +#465499 = VERTEX_POINT('',#465500); +#465500 = CARTESIAN_POINT('',(134.620227,-139.308317,-7.5E-02)); +#465501 = LINE('',#465502,#465503); +#465502 = CARTESIAN_POINT('',(134.620227,-139.596408,-7.5E-02)); +#465503 = VECTOR('',#465504,1.); +#465504 = DIRECTION('',(0.,1.,0.)); +#465505 = ORIENTED_EDGE('',*,*,#465506,.T.); +#465506 = EDGE_CURVE('',#465499,#465507,#465509,.T.); +#465507 = VERTEX_POINT('',#465508); +#465508 = CARTESIAN_POINT('',(134.332136,-139.308317,-7.5E-02)); +#465509 = LINE('',#465510,#465511); +#465510 = CARTESIAN_POINT('',(134.620227,-139.308317,-7.5E-02)); +#465511 = VECTOR('',#465512,1.); +#465512 = DIRECTION('',(-1.,0.,0.)); +#465513 = ORIENTED_EDGE('',*,*,#465514,.T.); +#465514 = EDGE_CURVE('',#465507,#465515,#465517,.T.); +#465515 = VERTEX_POINT('',#465516); +#465516 = CARTESIAN_POINT('',(134.332136,-139.596408,-7.5E-02)); +#465517 = LINE('',#465518,#465519); +#465518 = CARTESIAN_POINT('',(134.332136,-139.308317,-7.5E-02)); +#465519 = VECTOR('',#465520,1.); +#465520 = DIRECTION('',(0.,-1.,0.)); +#465521 = ORIENTED_EDGE('',*,*,#465522,.T.); +#465522 = EDGE_CURVE('',#465515,#465523,#465525,.T.); +#465523 = VERTEX_POINT('',#465524); +#465524 = CARTESIAN_POINT('',(133.179773,-139.596408,-7.5E-02)); +#465525 = LINE('',#465526,#465527); +#465526 = CARTESIAN_POINT('',(134.332136,-139.596408,-7.5E-02)); +#465527 = VECTOR('',#465528,1.); +#465528 = DIRECTION('',(-1.,0.,0.)); +#465529 = ORIENTED_EDGE('',*,*,#465530,.T.); +#465530 = EDGE_CURVE('',#465523,#465531,#465533,.T.); +#465531 = VERTEX_POINT('',#465532); +#465532 = CARTESIAN_POINT('',(133.179773,-139.308317,-7.5E-02)); +#465533 = LINE('',#465534,#465535); +#465534 = CARTESIAN_POINT('',(133.179773,-139.596408,-7.5E-02)); +#465535 = VECTOR('',#465536,1.); +#465536 = DIRECTION('',(0.,1.,0.)); +#465537 = ORIENTED_EDGE('',*,*,#465538,.T.); +#465538 = EDGE_CURVE('',#465531,#465539,#465541,.T.); +#465539 = VERTEX_POINT('',#465540); +#465540 = CARTESIAN_POINT('',(133.467864,-139.308317,-7.5E-02)); +#465541 = LINE('',#465542,#465543); +#465542 = CARTESIAN_POINT('',(133.179773,-139.308317,-7.5E-02)); +#465543 = VECTOR('',#465544,1.); +#465544 = DIRECTION('',(1.,0.,0.)); +#465545 = ORIENTED_EDGE('',*,*,#465546,.T.); +#465546 = EDGE_CURVE('',#465539,#465547,#465549,.T.); +#465547 = VERTEX_POINT('',#465548); +#465548 = CARTESIAN_POINT('',(133.467864,-139.020227,-7.5E-02)); +#465549 = LINE('',#465550,#465551); +#465550 = CARTESIAN_POINT('',(133.467864,-139.308317,-7.5E-02)); +#465551 = VECTOR('',#465552,1.); +#465552 = DIRECTION('',(0.,1.,0.)); +#465553 = ORIENTED_EDGE('',*,*,#465554,.T.); +#465554 = EDGE_CURVE('',#465547,#465555,#465557,.T.); +#465555 = VERTEX_POINT('',#465556); +#465556 = CARTESIAN_POINT('',(133.755955,-139.020227,-7.5E-02)); +#465557 = LINE('',#465558,#465559); +#465558 = CARTESIAN_POINT('',(133.467864,-139.020227,-7.5E-02)); +#465559 = VECTOR('',#465560,1.); +#465560 = DIRECTION('',(1.,0.,0.)); +#465561 = ORIENTED_EDGE('',*,*,#465562,.T.); +#465562 = EDGE_CURVE('',#465555,#465563,#465565,.T.); +#465563 = VERTEX_POINT('',#465564); +#465564 = CARTESIAN_POINT('',(133.755955,-138.732136,-7.5E-02)); +#465565 = LINE('',#465566,#465567); +#465566 = CARTESIAN_POINT('',(133.755955,-139.020227,-7.5E-02)); +#465567 = VECTOR('',#465568,1.); +#465568 = DIRECTION('',(0.,1.,0.)); +#465569 = ORIENTED_EDGE('',*,*,#465570,.T.); +#465570 = EDGE_CURVE('',#465563,#465571,#465573,.T.); +#465571 = VERTEX_POINT('',#465572); +#465572 = CARTESIAN_POINT('',(133.467864,-138.732136,-7.5E-02)); +#465573 = LINE('',#465574,#465575); +#465574 = CARTESIAN_POINT('',(133.755955,-138.732136,-7.5E-02)); +#465575 = VECTOR('',#465576,1.); +#465576 = DIRECTION('',(-1.,0.,0.)); +#465577 = ORIENTED_EDGE('',*,*,#465578,.T.); +#465578 = EDGE_CURVE('',#465571,#465579,#465581,.T.); +#465579 = VERTEX_POINT('',#465580); +#465580 = CARTESIAN_POINT('',(133.467864,-138.444045,-7.5E-02)); +#465581 = LINE('',#465582,#465583); +#465582 = CARTESIAN_POINT('',(133.467864,-138.732136,-7.5E-02)); +#465583 = VECTOR('',#465584,1.); +#465584 = DIRECTION('',(0.,1.,0.)); +#465585 = ORIENTED_EDGE('',*,*,#465586,.T.); +#465586 = EDGE_CURVE('',#465579,#465587,#465589,.T.); +#465587 = VERTEX_POINT('',#465588); +#465588 = CARTESIAN_POINT('',(133.179773,-138.444045,-7.5E-02)); +#465589 = LINE('',#465590,#465591); +#465590 = CARTESIAN_POINT('',(133.467864,-138.444045,-7.5E-02)); +#465591 = VECTOR('',#465592,1.); +#465592 = DIRECTION('',(-1.,0.,0.)); +#465593 = ORIENTED_EDGE('',*,*,#465594,.T.); +#465594 = EDGE_CURVE('',#465587,#465595,#465597,.T.); +#465595 = VERTEX_POINT('',#465596); +#465596 = CARTESIAN_POINT('',(133.179773,-138.155954,-7.5E-02)); +#465597 = LINE('',#465598,#465599); +#465598 = CARTESIAN_POINT('',(133.179773,-138.444045,-7.5E-02)); +#465599 = VECTOR('',#465600,1.); +#465600 = DIRECTION('',(0.,1.,0.)); +#465601 = ORIENTED_EDGE('',*,*,#465602,.T.); +#465602 = EDGE_CURVE('',#465595,#465247,#465603,.T.); +#465603 = LINE('',#465604,#465605); +#465604 = CARTESIAN_POINT('',(133.179773,-138.155954,-7.5E-02)); +#465605 = VECTOR('',#465606,1.); +#465606 = DIRECTION('',(1.,0.,0.)); +#465607 = FACE_BOUND('',#465608,.T.); +#465608 = EDGE_LOOP('',(#465609,#465619,#465627,#465635)); +#465609 = ORIENTED_EDGE('',*,*,#465610,.T.); +#465610 = EDGE_CURVE('',#465611,#465613,#465615,.T.); +#465611 = VERTEX_POINT('',#465612); +#465612 = CARTESIAN_POINT('',(134.908318,-139.020227,-7.5E-02)); +#465613 = VERTEX_POINT('',#465614); +#465614 = CARTESIAN_POINT('',(134.908318,-138.732136,-7.5E-02)); +#465615 = LINE('',#465616,#465617); +#465616 = CARTESIAN_POINT('',(134.908318,-139.020227,-7.5E-02)); +#465617 = VECTOR('',#465618,1.); +#465618 = DIRECTION('',(0.,1.,0.)); +#465619 = ORIENTED_EDGE('',*,*,#465620,.T.); +#465620 = EDGE_CURVE('',#465613,#465621,#465623,.T.); +#465621 = VERTEX_POINT('',#465622); +#465622 = CARTESIAN_POINT('',(134.332136,-138.732136,-7.5E-02)); +#465623 = LINE('',#465624,#465625); +#465624 = CARTESIAN_POINT('',(134.908318,-138.732136,-7.5E-02)); +#465625 = VECTOR('',#465626,1.); +#465626 = DIRECTION('',(-1.,0.,0.)); +#465627 = ORIENTED_EDGE('',*,*,#465628,.T.); +#465628 = EDGE_CURVE('',#465621,#465629,#465631,.T.); +#465629 = VERTEX_POINT('',#465630); +#465630 = CARTESIAN_POINT('',(134.332136,-139.020227,-7.5E-02)); +#465631 = LINE('',#465632,#465633); +#465632 = CARTESIAN_POINT('',(134.332136,-138.732136,-7.5E-02)); +#465633 = VECTOR('',#465634,1.); +#465634 = DIRECTION('',(0.,-1.,0.)); +#465635 = ORIENTED_EDGE('',*,*,#465636,.T.); +#465636 = EDGE_CURVE('',#465629,#465611,#465637,.T.); +#465637 = LINE('',#465638,#465639); +#465638 = CARTESIAN_POINT('',(134.332136,-139.020227,-7.5E-02)); +#465639 = VECTOR('',#465640,1.); +#465640 = DIRECTION('',(1.,0.,0.)); +#465641 = PLANE('',#465642); +#465642 = AXIS2_PLACEMENT_3D('',#465643,#465644,#465645); +#465643 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465644 = DIRECTION('',(-0.,-0.,-1.)); +#465645 = DIRECTION('',(-1.,0.,0.)); +#465646 = SHELL_BASED_SURFACE_MODEL('',(#465647)); +#465647 = OPEN_SHELL('',(#465648)); +#465648 = ADVANCED_FACE('',(#465649),#465959,.T.); +#465649 = FACE_BOUND('',#465650,.T.); +#465650 = EDGE_LOOP('',(#465651,#465662,#465670,#465678,#465686,#465694, + #465702,#465710,#465718,#465726,#465734,#465742,#465750,#465758, + #465767,#465775,#465783,#465791,#465799,#465808,#465816,#465824, + #465832,#465840,#465848,#465856,#465864,#465872,#465880,#465888, + #465896,#465904,#465912,#465921,#465929,#465937,#465945,#465953)); +#465651 = ORIENTED_EDGE('',*,*,#465652,.T.); +#465652 = EDGE_CURVE('',#465653,#465655,#465657,.T.); +#465653 = VERTEX_POINT('',#465654); +#465654 = CARTESIAN_POINT('',(153.974926,-138.900341,-7.5E-02)); +#465655 = VERTEX_POINT('',#465656); +#465656 = CARTESIAN_POINT('',(154.072234,-138.888074,-7.5E-02)); +#465657 = CIRCLE('',#465658,4.999973388518E-02); +#465658 = AXIS2_PLACEMENT_3D('',#465659,#465660,#465661); +#465659 = CARTESIAN_POINT('',(154.02479997754,-138.9038849741,-7.5E-02) + ); +#465660 = DIRECTION('',(0.,0.,-1.)); +#465661 = DIRECTION('',(-0.997484859799,7.087985942347E-02,0.)); +#465662 = ORIENTED_EDGE('',*,*,#465663,.T.); +#465663 = EDGE_CURVE('',#465655,#465664,#465666,.T.); +#465664 = VERTEX_POINT('',#465665); +#465665 = CARTESIAN_POINT('',(154.122419,-139.046742,-7.5E-02)); +#465666 = LINE('',#465667,#465668); +#465667 = CARTESIAN_POINT('',(154.072234,-138.888074,-7.5E-02)); +#465668 = VECTOR('',#465669,1.); +#465669 = DIRECTION('',(0.301564730907,-0.953445705362,0.)); +#465670 = ORIENTED_EDGE('',*,*,#465671,.T.); +#465671 = EDGE_CURVE('',#465664,#465672,#465674,.T.); +#465672 = VERTEX_POINT('',#465673); +#465673 = CARTESIAN_POINT('',(154.120176,-139.296109,-7.5E-02)); +#465674 = LINE('',#465675,#465676); +#465675 = CARTESIAN_POINT('',(154.122419,-139.046742,-7.5E-02)); +#465676 = VECTOR('',#465677,1.); +#465677 = DIRECTION('',(-8.994410926377E-03,-0.999959549468,0.)); +#465678 = ORIENTED_EDGE('',*,*,#465679,.T.); +#465679 = EDGE_CURVE('',#465672,#465680,#465682,.T.); +#465680 = VERTEX_POINT('',#465681); +#465681 = CARTESIAN_POINT('',(154.060155,-139.415431,-7.5E-02)); +#465682 = LINE('',#465683,#465684); +#465683 = CARTESIAN_POINT('',(154.120176,-139.296109,-7.5E-02)); +#465684 = VECTOR('',#465685,1.); +#465685 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#465686 = ORIENTED_EDGE('',*,*,#465687,.T.); +#465687 = EDGE_CURVE('',#465680,#465688,#465690,.T.); +#465688 = VERTEX_POINT('',#465689); +#465689 = CARTESIAN_POINT('',(153.99954,-139.472416,-7.5E-02)); +#465690 = LINE('',#465691,#465692); +#465691 = CARTESIAN_POINT('',(154.060155,-139.415431,-7.5E-02)); +#465692 = VECTOR('',#465693,1.); +#465693 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#465694 = ORIENTED_EDGE('',*,*,#465695,.T.); +#465695 = EDGE_CURVE('',#465688,#465696,#465698,.T.); +#465696 = VERTEX_POINT('',#465697); +#465697 = CARTESIAN_POINT('',(153.893214,-139.52307,-7.5E-02)); +#465698 = LINE('',#465699,#465700); +#465699 = CARTESIAN_POINT('',(153.99954,-139.472416,-7.5E-02)); +#465700 = VECTOR('',#465701,1.); +#465701 = DIRECTION('',(-0.902786113268,-0.430089797241,0.)); +#465702 = ORIENTED_EDGE('',*,*,#465703,.T.); +#465703 = EDGE_CURVE('',#465696,#465704,#465706,.T.); +#465704 = VERTEX_POINT('',#465705); +#465705 = CARTESIAN_POINT('',(153.775431,-139.52307,-7.5E-02)); +#465706 = LINE('',#465707,#465708); +#465707 = CARTESIAN_POINT('',(153.893214,-139.52307,-7.5E-02)); +#465708 = VECTOR('',#465709,1.); +#465709 = DIRECTION('',(-1.,0.,0.)); +#465710 = ORIENTED_EDGE('',*,*,#465711,.T.); +#465711 = EDGE_CURVE('',#465704,#465712,#465714,.T.); +#465712 = VERTEX_POINT('',#465713); +#465713 = CARTESIAN_POINT('',(153.65611,-139.463049,-7.5E-02)); +#465714 = LINE('',#465715,#465716); +#465715 = CARTESIAN_POINT('',(153.775431,-139.52307,-7.5E-02)); +#465716 = VECTOR('',#465717,1.); +#465717 = DIRECTION('',(-0.893344973043,0.449371515718,0.)); +#465718 = ORIENTED_EDGE('',*,*,#465719,.T.); +#465719 = EDGE_CURVE('',#465712,#465720,#465722,.T.); +#465720 = VERTEX_POINT('',#465721); +#465721 = CARTESIAN_POINT('',(153.599125,-139.402435,-7.5E-02)); +#465722 = LINE('',#465723,#465724); +#465723 = CARTESIAN_POINT('',(153.65611,-139.463049,-7.5E-02)); +#465724 = VECTOR('',#465725,1.); +#465725 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#465726 = ORIENTED_EDGE('',*,*,#465727,.T.); +#465727 = EDGE_CURVE('',#465720,#465728,#465730,.T.); +#465728 = VERTEX_POINT('',#465729); +#465729 = CARTESIAN_POINT('',(153.547721,-139.296964,-7.5E-02)); +#465730 = LINE('',#465731,#465732); +#465731 = CARTESIAN_POINT('',(153.599125,-139.402435,-7.5E-02)); +#465732 = VECTOR('',#465733,1.); +#465733 = DIRECTION('',(-0.438111947913,0.898920419779,0.)); +#465734 = ORIENTED_EDGE('',*,*,#465735,.T.); +#465735 = EDGE_CURVE('',#465728,#465736,#465738,.T.); +#465736 = VERTEX_POINT('',#465737); +#465737 = CARTESIAN_POINT('',(153.501433,-139.111813,-7.5E-02)); +#465738 = LINE('',#465739,#465740); +#465739 = CARTESIAN_POINT('',(153.547721,-139.296964,-7.5E-02)); +#465740 = VECTOR('',#465741,1.); +#465741 = DIRECTION('',(-0.242536857915,0.970142191925,0.)); +#465742 = ORIENTED_EDGE('',*,*,#465743,.T.); +#465743 = EDGE_CURVE('',#465736,#465744,#465746,.T.); +#465744 = VERTEX_POINT('',#465745); +#465745 = CARTESIAN_POINT('',(153.459897,-139.028741,-7.5E-02)); +#465746 = LINE('',#465747,#465748); +#465747 = CARTESIAN_POINT('',(153.501433,-139.111813,-7.5E-02)); +#465748 = VECTOR('',#465749,1.); +#465749 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#465750 = ORIENTED_EDGE('',*,*,#465751,.T.); +#465751 = EDGE_CURVE('',#465744,#465752,#465754,.T.); +#465752 = VERTEX_POINT('',#465753); +#465753 = CARTESIAN_POINT('',(153.423753,-138.992596,-7.5E-02)); +#465754 = LINE('',#465755,#465756); +#465755 = CARTESIAN_POINT('',(153.459897,-139.028741,-7.5E-02)); +#465756 = VECTOR('',#465757,1.); +#465757 = DIRECTION('',(-0.707096999454,0.707116562784,0.)); +#465758 = ORIENTED_EDGE('',*,*,#465759,.T.); +#465759 = EDGE_CURVE('',#465752,#465760,#465762,.T.); +#465760 = VERTEX_POINT('',#465761); +#465761 = CARTESIAN_POINT('',(153.197275,-138.992596,-7.5E-02)); +#465762 = CIRCLE('',#465763,0.172178775775); +#465763 = AXIS2_PLACEMENT_3D('',#465764,#465765,#465766); +#465764 = CARTESIAN_POINT('',(153.310514,-139.1222974252,-7.5E-02)); +#465765 = DIRECTION('',(0.,0.,1.)); +#465766 = DIRECTION('',(0.657682687606,0.753295083234,-0.)); +#465767 = ORIENTED_EDGE('',*,*,#465768,.T.); +#465768 = EDGE_CURVE('',#465760,#465769,#465771,.T.); +#465769 = VERTEX_POINT('',#465770); +#465770 = CARTESIAN_POINT('',(153.16113,-139.02874,-7.5E-02)); +#465771 = LINE('',#465772,#465773); +#465772 = CARTESIAN_POINT('',(153.197275,-138.992596,-7.5E-02)); +#465773 = VECTOR('',#465774,1.); +#465774 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#465775 = ORIENTED_EDGE('',*,*,#465776,.T.); +#465776 = EDGE_CURVE('',#465769,#465777,#465779,.T.); +#465777 = VERTEX_POINT('',#465778); +#465778 = CARTESIAN_POINT('',(153.122419,-139.106164,-7.5E-02)); +#465779 = LINE('',#465780,#465781); +#465780 = CARTESIAN_POINT('',(153.16113,-139.02874,-7.5E-02)); +#465781 = VECTOR('',#465782,1.); +#465782 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#465783 = ORIENTED_EDGE('',*,*,#465784,.T.); +#465784 = EDGE_CURVE('',#465777,#465785,#465787,.T.); +#465785 = VERTEX_POINT('',#465786); +#465786 = CARTESIAN_POINT('',(153.122419,-139.324342,-7.5E-02)); +#465787 = LINE('',#465788,#465789); +#465788 = CARTESIAN_POINT('',(153.122419,-139.106164,-7.5E-02)); +#465789 = VECTOR('',#465790,1.); +#465790 = DIRECTION('',(0.,-1.,0.)); +#465791 = ORIENTED_EDGE('',*,*,#465792,.T.); +#465792 = EDGE_CURVE('',#465785,#465793,#465795,.T.); +#465793 = VERTEX_POINT('',#465794); +#465794 = CARTESIAN_POINT('',(153.167472,-139.459501,-7.5E-02)); +#465795 = LINE('',#465796,#465797); +#465796 = CARTESIAN_POINT('',(153.122419,-139.324342,-7.5E-02)); +#465797 = VECTOR('',#465798,1.); +#465798 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#465799 = ORIENTED_EDGE('',*,*,#465800,.T.); +#465800 = EDGE_CURVE('',#465793,#465801,#465803,.T.); +#465801 = VERTEX_POINT('',#465802); +#465802 = CARTESIAN_POINT('',(153.072604,-139.491124,-7.5E-02)); +#465803 = CIRCLE('',#465804,4.999987888243E-02); +#465804 = AXIS2_PLACEMENT_3D('',#465805,#465806,#465807); +#465805 = CARTESIAN_POINT('',(153.12003797079,-139.4753124123,-7.5E-02) + ); +#465806 = DIRECTION('',(0.,0.,-1.)); +#465807 = DIRECTION('',(0.948682882121,0.316229013801,0.)); +#465808 = ORIENTED_EDGE('',*,*,#465809,.T.); +#465809 = EDGE_CURVE('',#465801,#465810,#465812,.T.); +#465810 = VERTEX_POINT('',#465811); +#465811 = CARTESIAN_POINT('',(153.022419,-139.332456,-7.5E-02)); +#465812 = LINE('',#465813,#465814); +#465813 = CARTESIAN_POINT('',(153.072604,-139.491124,-7.5E-02)); +#465814 = VECTOR('',#465815,1.); +#465815 = DIRECTION('',(-0.301564730907,0.953445705362,0.)); +#465816 = ORIENTED_EDGE('',*,*,#465817,.T.); +#465817 = EDGE_CURVE('',#465810,#465818,#465820,.T.); +#465818 = VERTEX_POINT('',#465819); +#465819 = CARTESIAN_POINT('',(153.024661,-139.083088,-7.5E-02)); +#465820 = LINE('',#465821,#465822); +#465821 = CARTESIAN_POINT('',(153.022419,-139.332456,-7.5E-02)); +#465822 = VECTOR('',#465823,1.); +#465823 = DIRECTION('',(8.990365209133E-03,0.99995958585,0.)); +#465824 = ORIENTED_EDGE('',*,*,#465825,.T.); +#465825 = EDGE_CURVE('',#465818,#465826,#465828,.T.); +#465826 = VERTEX_POINT('',#465827); +#465827 = CARTESIAN_POINT('',(153.084683,-138.963768,-7.5E-02)); +#465828 = LINE('',#465829,#465830); +#465829 = CARTESIAN_POINT('',(153.024661,-139.083088,-7.5E-02)); +#465830 = VECTOR('',#465831,1.); +#465831 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#465832 = ORIENTED_EDGE('',*,*,#465833,.T.); +#465833 = EDGE_CURVE('',#465826,#465834,#465836,.T.); +#465834 = VERTEX_POINT('',#465835); +#465835 = CARTESIAN_POINT('',(153.145296,-138.906783,-7.5E-02)); +#465836 = LINE('',#465837,#465838); +#465837 = CARTESIAN_POINT('',(153.084683,-138.963768,-7.5E-02)); +#465838 = VECTOR('',#465839,1.); +#465839 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#465840 = ORIENTED_EDGE('',*,*,#465841,.T.); +#465841 = EDGE_CURVE('',#465834,#465842,#465844,.T.); +#465842 = VERTEX_POINT('',#465843); +#465843 = CARTESIAN_POINT('',(153.251622,-138.856127,-7.5E-02)); +#465844 = LINE('',#465845,#465846); +#465845 = CARTESIAN_POINT('',(153.145296,-138.906783,-7.5E-02)); +#465846 = VECTOR('',#465847,1.); +#465847 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#465848 = ORIENTED_EDGE('',*,*,#465849,.T.); +#465849 = EDGE_CURVE('',#465842,#465850,#465852,.T.); +#465850 = VERTEX_POINT('',#465851); +#465851 = CARTESIAN_POINT('',(153.360589,-138.854373,-7.5E-02)); +#465852 = LINE('',#465853,#465854); +#465853 = CARTESIAN_POINT('',(153.251622,-138.856127,-7.5E-02)); +#465854 = VECTOR('',#465855,1.); +#465855 = DIRECTION('',(0.99987047464,1.609453148655E-02,0.)); +#465856 = ORIENTED_EDGE('',*,*,#465857,.T.); +#465857 = EDGE_CURVE('',#465850,#465858,#465860,.T.); +#465858 = VERTEX_POINT('',#465859); +#465859 = CARTESIAN_POINT('',(153.380494,-138.859164,-7.5E-02)); +#465860 = LINE('',#465861,#465862); +#465861 = CARTESIAN_POINT('',(153.360589,-138.854373,-7.5E-02)); +#465862 = VECTOR('',#465863,1.); +#465863 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#465864 = ORIENTED_EDGE('',*,*,#465865,.T.); +#465865 = EDGE_CURVE('',#465858,#465866,#465868,.T.); +#465866 = VERTEX_POINT('',#465867); +#465867 = CARTESIAN_POINT('',(153.488726,-138.916149,-7.5E-02)); +#465868 = LINE('',#465869,#465870); +#465869 = CARTESIAN_POINT('',(153.380494,-138.859164,-7.5E-02)); +#465870 = VECTOR('',#465871,1.); +#465871 = DIRECTION('',(0.884848162196,-0.465879522902,0.)); +#465872 = ORIENTED_EDGE('',*,*,#465873,.T.); +#465873 = EDGE_CURVE('',#465866,#465874,#465876,.T.); +#465874 = VERTEX_POINT('',#465875); +#465875 = CARTESIAN_POINT('',(153.545711,-138.976762,-7.5E-02)); +#465876 = LINE('',#465877,#465878); +#465877 = CARTESIAN_POINT('',(153.488726,-138.916149,-7.5E-02)); +#465878 = VECTOR('',#465879,1.); +#465879 = DIRECTION('',(0.68496603593,-0.728574999312,0.)); +#465880 = ORIENTED_EDGE('',*,*,#465881,.T.); +#465881 = EDGE_CURVE('',#465874,#465882,#465884,.T.); +#465882 = VERTEX_POINT('',#465883); +#465883 = CARTESIAN_POINT('',(153.597116,-139.082234,-7.5E-02)); +#465884 = LINE('',#465885,#465886); +#465885 = CARTESIAN_POINT('',(153.545711,-138.976762,-7.5E-02)); +#465886 = VECTOR('',#465887,1.); +#465887 = DIRECTION('',(0.438115478318,-0.898918699137,0.)); +#465888 = ORIENTED_EDGE('',*,*,#465889,.T.); +#465889 = EDGE_CURVE('',#465882,#465890,#465892,.T.); +#465890 = VERTEX_POINT('',#465891); +#465891 = CARTESIAN_POINT('',(153.643404,-139.267386,-7.5E-02)); +#465892 = LINE('',#465893,#465894); +#465893 = CARTESIAN_POINT('',(153.597116,-139.082234,-7.5E-02)); +#465894 = VECTOR('',#465895,1.); +#465895 = DIRECTION('',(0.242535625036,-0.970142500145,0.)); +#465896 = ORIENTED_EDGE('',*,*,#465897,.T.); +#465897 = EDGE_CURVE('',#465890,#465898,#465900,.T.); +#465898 = VERTEX_POINT('',#465899); +#465899 = CARTESIAN_POINT('',(153.684939,-139.350457,-7.5E-02)); +#465900 = LINE('',#465901,#465902); +#465901 = CARTESIAN_POINT('',(153.643404,-139.267386,-7.5E-02)); +#465902 = VECTOR('',#465903,1.); +#465903 = DIRECTION('',(0.447209288676,-0.894429344399,0.)); +#465904 = ORIENTED_EDGE('',*,*,#465905,.T.); +#465905 = EDGE_CURVE('',#465898,#465906,#465908,.T.); +#465906 = VERTEX_POINT('',#465907); +#465907 = CARTESIAN_POINT('',(153.721084,-139.386601,-7.5E-02)); +#465908 = LINE('',#465909,#465910); +#465909 = CARTESIAN_POINT('',(153.684939,-139.350457,-7.5E-02)); +#465910 = VECTOR('',#465911,1.); +#465911 = DIRECTION('',(0.707116562784,-0.707096999454,0.)); +#465912 = ORIENTED_EDGE('',*,*,#465913,.T.); +#465913 = EDGE_CURVE('',#465906,#465914,#465916,.T.); +#465914 = VERTEX_POINT('',#465915); +#465915 = CARTESIAN_POINT('',(153.947561,-139.386601,-7.5E-02)); +#465916 = CIRCLE('',#465917,0.172175113449); +#465917 = AXIS2_PLACEMENT_3D('',#465918,#465919,#465920); +#465918 = CARTESIAN_POINT('',(153.8343225,-139.256904,-7.5E-02)); +#465919 = DIRECTION('',(0.,0.,1.)); +#465920 = DIRECTION('',(-0.657693773109,-0.75328540462,0.)); +#465921 = ORIENTED_EDGE('',*,*,#465922,.T.); +#465922 = EDGE_CURVE('',#465914,#465923,#465925,.T.); +#465923 = VERTEX_POINT('',#465924); +#465924 = CARTESIAN_POINT('',(153.983708,-139.350455,-7.5E-02)); +#465925 = LINE('',#465926,#465927); +#465926 = CARTESIAN_POINT('',(153.947561,-139.386601,-7.5E-02)); +#465927 = VECTOR('',#465928,1.); +#465928 = DIRECTION('',(0.707116562243,0.707096999995,0.)); +#465929 = ORIENTED_EDGE('',*,*,#465930,.T.); +#465930 = EDGE_CURVE('',#465923,#465931,#465933,.T.); +#465931 = VERTEX_POINT('',#465932); +#465932 = CARTESIAN_POINT('',(154.022419,-139.273033,-7.5E-02)); +#465933 = LINE('',#465934,#465935); +#465934 = CARTESIAN_POINT('',(153.983708,-139.350455,-7.5E-02)); +#465935 = VECTOR('',#465936,1.); +#465936 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#465937 = ORIENTED_EDGE('',*,*,#465938,.T.); +#465938 = EDGE_CURVE('',#465931,#465939,#465941,.T.); +#465939 = VERTEX_POINT('',#465940); +#465940 = CARTESIAN_POINT('',(154.022419,-139.054855,-7.5E-02)); +#465941 = LINE('',#465942,#465943); +#465942 = CARTESIAN_POINT('',(154.022419,-139.273033,-7.5E-02)); +#465943 = VECTOR('',#465944,1.); +#465944 = DIRECTION('',(0.,1.,0.)); +#465945 = ORIENTED_EDGE('',*,*,#465946,.T.); +#465946 = EDGE_CURVE('',#465939,#465947,#465949,.T.); +#465947 = VERTEX_POINT('',#465948); +#465948 = CARTESIAN_POINT('',(153.977366,-138.919696,-7.5E-02)); +#465949 = LINE('',#465950,#465951); +#465950 = CARTESIAN_POINT('',(154.022419,-139.054855,-7.5E-02)); +#465951 = VECTOR('',#465952,1.); +#465952 = DIRECTION('',(-0.316227766017,0.94868329805,0.)); +#465953 = ORIENTED_EDGE('',*,*,#465954,.T.); +#465954 = EDGE_CURVE('',#465947,#465653,#465955,.T.); +#465955 = LINE('',#465956,#465957); +#465956 = CARTESIAN_POINT('',(153.977366,-138.919696,-7.5E-02)); +#465957 = VECTOR('',#465958,1.); +#465958 = DIRECTION('',(-0.125075649037,0.992147207837,0.)); +#465959 = PLANE('',#465960); +#465960 = AXIS2_PLACEMENT_3D('',#465961,#465962,#465963); +#465961 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#465962 = DIRECTION('',(-0.,-0.,-1.)); +#465963 = DIRECTION('',(-1.,0.,0.)); +#465964 = SHELL_BASED_SURFACE_MODEL('',(#465965)); +#465965 = OPEN_SHELL('',(#465966)); +#465966 = ADVANCED_FACE('',(#465967,#466147),#466198,.T.); +#465967 = FACE_BOUND('',#465968,.T.); +#465968 = EDGE_LOOP('',(#465969,#465979,#465987,#465995,#466003,#466011, + #466019,#466027,#466035,#466044,#466052,#466060,#466068,#466076, + #466084,#466092,#466100,#466108,#466116,#466124,#466132,#466141)); +#465969 = ORIENTED_EDGE('',*,*,#465970,.T.); +#465970 = EDGE_CURVE('',#465971,#465973,#465975,.T.); +#465971 = VERTEX_POINT('',#465972); +#465972 = CARTESIAN_POINT('',(151.821066,-138.859167,-7.5E-02)); +#465973 = VERTEX_POINT('',#465974); +#465974 = CARTESIAN_POINT('',(151.927392,-138.808511,-7.5E-02)); +#465975 = LINE('',#465976,#465977); +#465976 = CARTESIAN_POINT('',(151.821066,-138.859167,-7.5E-02)); +#465977 = VECTOR('',#465978,1.); +#465978 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#465979 = ORIENTED_EDGE('',*,*,#465980,.T.); +#465980 = EDGE_CURVE('',#465973,#465981,#465983,.T.); +#465981 = VERTEX_POINT('',#465982); +#465982 = CARTESIAN_POINT('',(152.322073,-138.806757,-7.5E-02)); +#465983 = LINE('',#465984,#465985); +#465984 = CARTESIAN_POINT('',(151.927392,-138.808511,-7.5E-02)); +#465985 = VECTOR('',#465986,1.); +#465986 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#465987 = ORIENTED_EDGE('',*,*,#465988,.T.); +#465988 = EDGE_CURVE('',#465981,#465989,#465991,.T.); +#465989 = VERTEX_POINT('',#465990); +#465990 = CARTESIAN_POINT('',(152.341977,-138.811548,-7.5E-02)); +#465991 = LINE('',#465992,#465993); +#465992 = CARTESIAN_POINT('',(152.322073,-138.806757,-7.5E-02)); +#465993 = VECTOR('',#465994,1.); +#465994 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#465995 = ORIENTED_EDGE('',*,*,#465996,.T.); +#465996 = EDGE_CURVE('',#465989,#465997,#465999,.T.); +#465997 = VERTEX_POINT('',#465998); +#465998 = CARTESIAN_POINT('',(152.449807,-138.868938,-7.5E-02)); +#465999 = LINE('',#466000,#466001); +#466000 = CARTESIAN_POINT('',(152.341977,-138.811548,-7.5E-02)); +#466001 = VECTOR('',#466002,1.); +#466002 = DIRECTION('',(0.882758259515,-0.469827473928,0.)); +#466003 = ORIENTED_EDGE('',*,*,#466004,.T.); +#466004 = EDGE_CURVE('',#465997,#466005,#466007,.T.); +#466005 = VERTEX_POINT('',#466006); +#466006 = CARTESIAN_POINT('',(152.508669,-138.979992,-7.5E-02)); +#466007 = LINE('',#466008,#466009); +#466008 = CARTESIAN_POINT('',(152.449807,-138.868938,-7.5E-02)); +#466009 = VECTOR('',#466010,1.); +#466010 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#466011 = ORIENTED_EDGE('',*,*,#466012,.T.); +#466012 = EDGE_CURVE('',#466005,#466013,#466015,.T.); +#466013 = VERTEX_POINT('',#466014); +#466014 = CARTESIAN_POINT('',(152.512475,-138.999126,-7.5E-02)); +#466015 = LINE('',#466016,#466017); +#466016 = CARTESIAN_POINT('',(152.508669,-138.979992,-7.5E-02)); +#466017 = VECTOR('',#466018,1.); +#466018 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#466019 = ORIENTED_EDGE('',*,*,#466020,.T.); +#466020 = EDGE_CURVE('',#466013,#466021,#466023,.T.); +#466021 = VERTEX_POINT('',#466022); +#466022 = CARTESIAN_POINT('',(152.510232,-139.200874,-7.5E-02)); +#466023 = LINE('',#466024,#466025); +#466024 = CARTESIAN_POINT('',(152.512475,-138.999126,-7.5E-02)); +#466025 = VECTOR('',#466026,1.); +#466026 = DIRECTION('',(-1.111714311194E-02,-0.999938202655,0.)); +#466027 = ORIENTED_EDGE('',*,*,#466028,.T.); +#466028 = EDGE_CURVE('',#466021,#466029,#466031,.T.); +#466029 = VERTEX_POINT('',#466030); +#466030 = CARTESIAN_POINT('',(152.459577,-139.307201,-7.5E-02)); +#466031 = LINE('',#466032,#466033); +#466032 = CARTESIAN_POINT('',(152.510232,-139.200874,-7.5E-02)); +#466033 = VECTOR('',#466034,1.); +#466034 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#466035 = ORIENTED_EDGE('',*,*,#466036,.T.); +#466036 = EDGE_CURVE('',#466029,#466037,#466039,.T.); +#466037 = VERTEX_POINT('',#466038); +#466038 = CARTESIAN_POINT('',(152.370135,-139.262479,-7.5E-02)); +#466039 = CIRCLE('',#466040,4.999982161967E-02); +#466040 = AXIS2_PLACEMENT_3D('',#466041,#466042,#466043); +#466041 = CARTESIAN_POINT('',(152.41485599642,-139.2848400071,-7.5E-02) + ); +#466042 = DIRECTION('',(-0.,0.,-1.)); +#466043 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#466044 = ORIENTED_EDGE('',*,*,#466045,.T.); +#466045 = EDGE_CURVE('',#466037,#466046,#466048,.T.); +#466046 = VERTEX_POINT('',#466047); +#466047 = CARTESIAN_POINT('',(152.412475,-139.177798,-7.5E-02)); +#466048 = LINE('',#466049,#466050); +#466049 = CARTESIAN_POINT('',(152.370135,-139.262479,-7.5E-02)); +#466050 = VECTOR('',#466051,1.); +#466051 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#466052 = ORIENTED_EDGE('',*,*,#466053,.T.); +#466053 = EDGE_CURVE('',#466046,#466054,#466056,.T.); +#466054 = VERTEX_POINT('',#466055); +#466055 = CARTESIAN_POINT('',(152.412475,-139.010929,-7.5E-02)); +#466056 = LINE('',#466057,#466058); +#466057 = CARTESIAN_POINT('',(152.412475,-139.177798,-7.5E-02)); +#466058 = VECTOR('',#466059,1.); +#466059 = DIRECTION('',(0.,1.,0.)); +#466060 = ORIENTED_EDGE('',*,*,#466061,.T.); +#466061 = EDGE_CURVE('',#466054,#466062,#466064,.T.); +#466062 = VERTEX_POINT('',#466063); +#466063 = CARTESIAN_POINT('',(152.377588,-138.941155,-7.5E-02)); +#466064 = LINE('',#466065,#466066); +#466065 = CARTESIAN_POINT('',(152.412475,-139.010929,-7.5E-02)); +#466066 = VECTOR('',#466067,1.); +#466067 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#466068 = ORIENTED_EDGE('',*,*,#466069,.T.); +#466069 = EDGE_CURVE('',#466062,#466070,#466072,.T.); +#466070 = VERTEX_POINT('',#466071); +#466071 = CARTESIAN_POINT('',(152.307815,-138.906269,-7.5E-02)); +#466072 = LINE('',#466073,#466074); +#466073 = CARTESIAN_POINT('',(152.377588,-138.941155,-7.5E-02)); +#466074 = VECTOR('',#466075,1.); +#466075 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#466076 = ORIENTED_EDGE('',*,*,#466077,.T.); +#466077 = EDGE_CURVE('',#466070,#466078,#466080,.T.); +#466078 = VERTEX_POINT('',#466079); +#466079 = CARTESIAN_POINT('',(152.170131,-138.906269,-7.5E-02)); +#466080 = LINE('',#466081,#466082); +#466081 = CARTESIAN_POINT('',(152.307815,-138.906269,-7.5E-02)); +#466082 = VECTOR('',#466083,1.); +#466083 = DIRECTION('',(-1.,0.,0.)); +#466084 = ORIENTED_EDGE('',*,*,#466085,.T.); +#466085 = EDGE_CURVE('',#466078,#466086,#466088,.T.); +#466086 = VERTEX_POINT('',#466087); +#466087 = CARTESIAN_POINT('',(152.078317,-139.353372,-7.5E-02)); +#466088 = LINE('',#466089,#466090); +#466089 = CARTESIAN_POINT('',(152.170131,-138.906269,-7.5E-02)); +#466090 = VECTOR('',#466091,1.); +#466091 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#466092 = ORIENTED_EDGE('',*,*,#466093,.T.); +#466093 = EDGE_CURVE('',#466086,#466094,#466096,.T.); +#466094 = VERTEX_POINT('',#466095); +#466095 = CARTESIAN_POINT('',(152.053037,-139.378653,-7.5E-02)); +#466096 = LINE('',#466097,#466098); +#466097 = CARTESIAN_POINT('',(152.078317,-139.353372,-7.5E-02)); +#466098 = VECTOR('',#466099,1.); +#466099 = DIRECTION('',(-0.707092795827,-0.70712076627,0.)); +#466100 = ORIENTED_EDGE('',*,*,#466101,.T.); +#466101 = EDGE_CURVE('',#466094,#466102,#466104,.T.); +#466102 = VERTEX_POINT('',#466103); +#466103 = CARTESIAN_POINT('',(152.033903,-139.382459,-7.5E-02)); +#466104 = LINE('',#466105,#466106); +#466105 = CARTESIAN_POINT('',(152.053037,-139.378653,-7.5E-02)); +#466106 = VECTOR('',#466107,1.); +#466107 = DIRECTION('',(-0.980785174845,-0.195090852695,0.)); +#466108 = ORIENTED_EDGE('',*,*,#466109,.T.); +#466109 = EDGE_CURVE('',#466102,#466110,#466112,.T.); +#466110 = VERTEX_POINT('',#466111); +#466111 = CARTESIAN_POINT('',(151.927392,-139.380216,-7.5E-02)); +#466112 = LINE('',#466113,#466114); +#466113 = CARTESIAN_POINT('',(152.033903,-139.382459,-7.5E-02)); +#466114 = VECTOR('',#466115,1.); +#466115 = DIRECTION('',(-0.999778335979,2.105418977966E-02,0.)); +#466116 = ORIENTED_EDGE('',*,*,#466117,.T.); +#466117 = EDGE_CURVE('',#466110,#466118,#466120,.T.); +#466118 = VERTEX_POINT('',#466119); +#466119 = CARTESIAN_POINT('',(151.810667,-139.322612,-7.5E-02)); +#466120 = LINE('',#466121,#466122); +#466121 = CARTESIAN_POINT('',(151.927392,-139.380216,-7.5E-02)); +#466122 = VECTOR('',#466123,1.); +#466123 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#466124 = ORIENTED_EDGE('',*,*,#466125,.T.); +#466125 = EDGE_CURVE('',#466118,#466126,#466128,.T.); +#466126 = VERTEX_POINT('',#466127); +#466127 = CARTESIAN_POINT('',(151.798705,-139.3072,-7.5E-02)); +#466128 = LINE('',#466129,#466130); +#466129 = CARTESIAN_POINT('',(151.810667,-139.322612,-7.5E-02)); +#466130 = VECTOR('',#466131,1.); +#466131 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#466132 = ORIENTED_EDGE('',*,*,#466133,.T.); +#466133 = EDGE_CURVE('',#466126,#466134,#466136,.T.); +#466134 = VERTEX_POINT('',#466135); +#466135 = CARTESIAN_POINT('',(151.805654,-138.871128,-7.5E-02)); +#466136 = CIRCLE('',#466137,0.376597301495); +#466137 = AXIS2_PLACEMENT_3D('',#466138,#466139,#466140); +#466138 = CARTESIAN_POINT('',(152.10918084267,-139.094056202,-7.5E-02)); +#466139 = DIRECTION('',(0.,0.,-1.)); +#466140 = DIRECTION('',(-0.824423970765,-0.565972717035,-0.)); +#466141 = ORIENTED_EDGE('',*,*,#466142,.T.); +#466142 = EDGE_CURVE('',#466134,#465971,#466143,.T.); +#466143 = LINE('',#466144,#466145); +#466144 = CARTESIAN_POINT('',(151.805654,-138.871128,-7.5E-02)); +#466145 = VECTOR('',#466146,1.); +#466146 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#466147 = FACE_BOUND('',#466148,.T.); +#466148 = EDGE_LOOP('',(#466149,#466159,#466167,#466175,#466184,#466192) + ); +#466149 = ORIENTED_EDGE('',*,*,#466150,.T.); +#466150 = EDGE_CURVE('',#466151,#466153,#466155,.T.); +#466151 = VERTEX_POINT('',#466152); +#466152 = CARTESIAN_POINT('',(151.992913,-139.282459,-7.5E-02)); +#466153 = VERTEX_POINT('',#466154); +#466154 = CARTESIAN_POINT('',(152.068151,-138.906269,-7.5E-02)); +#466155 = LINE('',#466156,#466157); +#466156 = CARTESIAN_POINT('',(151.992913,-139.282459,-7.5E-02)); +#466157 = VECTOR('',#466158,1.); +#466158 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#466159 = ORIENTED_EDGE('',*,*,#466160,.T.); +#466160 = EDGE_CURVE('',#466153,#466161,#466163,.T.); +#466161 = VERTEX_POINT('',#466162); +#466162 = CARTESIAN_POINT('',(151.950469,-138.906269,-7.5E-02)); +#466163 = LINE('',#466164,#466165); +#466164 = CARTESIAN_POINT('',(152.068151,-138.906269,-7.5E-02)); +#466165 = VECTOR('',#466166,1.); +#466166 = DIRECTION('',(-1.,0.,0.)); +#466167 = ORIENTED_EDGE('',*,*,#466168,.T.); +#466168 = EDGE_CURVE('',#466161,#466169,#466171,.T.); +#466169 = VERTEX_POINT('',#466170); +#466170 = CARTESIAN_POINT('',(151.880694,-138.941155,-7.5E-02)); +#466171 = LINE('',#466172,#466173); +#466172 = CARTESIAN_POINT('',(151.950469,-138.906269,-7.5E-02)); +#466173 = VECTOR('',#466174,1.); +#466174 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#466175 = ORIENTED_EDGE('',*,*,#466176,.T.); +#466176 = EDGE_CURVE('',#466169,#466177,#466179,.T.); +#466177 = VERTEX_POINT('',#466178); +#466178 = CARTESIAN_POINT('',(151.880694,-139.247572,-7.5E-02)); +#466179 = CIRCLE('',#466180,0.26744056971); +#466180 = AXIS2_PLACEMENT_3D('',#466181,#466182,#466183); +#466181 = CARTESIAN_POINT('',(152.09990078332,-139.0943635,-7.5E-02)); +#466182 = DIRECTION('',(0.,0.,1.)); +#466183 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#466184 = ORIENTED_EDGE('',*,*,#466185,.T.); +#466185 = EDGE_CURVE('',#466177,#466186,#466188,.T.); +#466186 = VERTEX_POINT('',#466187); +#466187 = CARTESIAN_POINT('',(151.950469,-139.282459,-7.5E-02)); +#466188 = LINE('',#466189,#466190); +#466189 = CARTESIAN_POINT('',(151.880694,-139.247572,-7.5E-02)); +#466190 = VECTOR('',#466191,1.); +#466191 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#466192 = ORIENTED_EDGE('',*,*,#466193,.T.); +#466193 = EDGE_CURVE('',#466186,#466151,#466194,.T.); +#466194 = LINE('',#466195,#466196); +#466195 = CARTESIAN_POINT('',(151.950469,-139.282459,-7.5E-02)); +#466196 = VECTOR('',#466197,1.); +#466197 = DIRECTION('',(1.,0.,0.)); +#466198 = PLANE('',#466199); +#466199 = AXIS2_PLACEMENT_3D('',#466200,#466201,#466202); +#466200 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466201 = DIRECTION('',(-0.,-0.,-1.)); +#466202 = DIRECTION('',(-1.,0.,0.)); +#466203 = SHELL_BASED_SURFACE_MODEL('',(#466204)); +#466204 = OPEN_SHELL('',(#466205)); +#466205 = ADVANCED_FACE('',(#466206),#466248,.T.); +#466206 = FACE_BOUND('',#466207,.T.); +#466207 = EDGE_LOOP('',(#466208,#466218,#466226,#466234,#466242)); +#466208 = ORIENTED_EDGE('',*,*,#466209,.T.); +#466209 = EDGE_CURVE('',#466210,#466212,#466214,.T.); +#466210 = VERTEX_POINT('',#466211); +#466211 = CARTESIAN_POINT('',(128.858412,-139.308317,-7.5E-02)); +#466212 = VERTEX_POINT('',#466213); +#466213 = CARTESIAN_POINT('',(128.858412,-139.020227,-7.5E-02)); +#466214 = LINE('',#466215,#466216); +#466215 = CARTESIAN_POINT('',(128.858412,-139.308317,-7.5E-02)); +#466216 = VECTOR('',#466217,1.); +#466217 = DIRECTION('',(0.,1.,0.)); +#466218 = ORIENTED_EDGE('',*,*,#466219,.T.); +#466219 = EDGE_CURVE('',#466212,#466220,#466222,.T.); +#466220 = VERTEX_POINT('',#466221); +#466221 = CARTESIAN_POINT('',(129.146503,-139.020227,-7.5E-02)); +#466222 = LINE('',#466223,#466224); +#466223 = CARTESIAN_POINT('',(128.858412,-139.020227,-7.5E-02)); +#466224 = VECTOR('',#466225,1.); +#466225 = DIRECTION('',(1.,0.,0.)); +#466226 = ORIENTED_EDGE('',*,*,#466227,.T.); +#466227 = EDGE_CURVE('',#466220,#466228,#466230,.T.); +#466228 = VERTEX_POINT('',#466229); +#466229 = CARTESIAN_POINT('',(129.146503,-139.164272,-7.5E-02)); +#466230 = LINE('',#466231,#466232); +#466231 = CARTESIAN_POINT('',(129.146503,-139.020227,-7.5E-02)); +#466232 = VECTOR('',#466233,1.); +#466233 = DIRECTION('',(0.,-1.,0.)); +#466234 = ORIENTED_EDGE('',*,*,#466235,.T.); +#466235 = EDGE_CURVE('',#466228,#466236,#466238,.T.); +#466236 = VERTEX_POINT('',#466237); +#466237 = CARTESIAN_POINT('',(129.146503,-139.308317,-7.5E-02)); +#466238 = LINE('',#466239,#466240); +#466239 = CARTESIAN_POINT('',(129.146503,-139.164272,-7.5E-02)); +#466240 = VECTOR('',#466241,1.); +#466241 = DIRECTION('',(0.,-1.,0.)); +#466242 = ORIENTED_EDGE('',*,*,#466243,.T.); +#466243 = EDGE_CURVE('',#466236,#466210,#466244,.T.); +#466244 = LINE('',#466245,#466246); +#466245 = CARTESIAN_POINT('',(129.146503,-139.308317,-7.5E-02)); +#466246 = VECTOR('',#466247,1.); +#466247 = DIRECTION('',(-1.,0.,0.)); +#466248 = PLANE('',#466249); +#466249 = AXIS2_PLACEMENT_3D('',#466250,#466251,#466252); +#466250 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466251 = DIRECTION('',(-0.,-0.,-1.)); +#466252 = DIRECTION('',(-1.,0.,0.)); +#466253 = SHELL_BASED_SURFACE_MODEL('',(#466254)); +#466254 = OPEN_SHELL('',(#466255)); +#466255 = ADVANCED_FACE('',(#466256),#466298,.T.); +#466256 = FACE_BOUND('',#466257,.T.); +#466257 = EDGE_LOOP('',(#466258,#466268,#466276,#466284,#466292)); +#466258 = ORIENTED_EDGE('',*,*,#466259,.T.); +#466259 = EDGE_CURVE('',#466260,#466262,#466264,.T.); +#466260 = VERTEX_POINT('',#466261); +#466261 = CARTESIAN_POINT('',(135.77259,-139.308317,-7.5E-02)); +#466262 = VERTEX_POINT('',#466263); +#466263 = CARTESIAN_POINT('',(135.77259,-139.020227,-7.5E-02)); +#466264 = LINE('',#466265,#466266); +#466265 = CARTESIAN_POINT('',(135.77259,-139.308317,-7.5E-02)); +#466266 = VECTOR('',#466267,1.); +#466267 = DIRECTION('',(0.,1.,0.)); +#466268 = ORIENTED_EDGE('',*,*,#466269,.T.); +#466269 = EDGE_CURVE('',#466262,#466270,#466272,.T.); +#466270 = VERTEX_POINT('',#466271); +#466271 = CARTESIAN_POINT('',(136.060681,-139.020227,-7.5E-02)); +#466272 = LINE('',#466273,#466274); +#466273 = CARTESIAN_POINT('',(135.77259,-139.020227,-7.5E-02)); +#466274 = VECTOR('',#466275,1.); +#466275 = DIRECTION('',(1.,0.,0.)); +#466276 = ORIENTED_EDGE('',*,*,#466277,.T.); +#466277 = EDGE_CURVE('',#466270,#466278,#466280,.T.); +#466278 = VERTEX_POINT('',#466279); +#466279 = CARTESIAN_POINT('',(136.060681,-139.164272,-7.5E-02)); +#466280 = LINE('',#466281,#466282); +#466281 = CARTESIAN_POINT('',(136.060681,-139.020227,-7.5E-02)); +#466282 = VECTOR('',#466283,1.); +#466283 = DIRECTION('',(0.,-1.,0.)); +#466284 = ORIENTED_EDGE('',*,*,#466285,.T.); +#466285 = EDGE_CURVE('',#466278,#466286,#466288,.T.); +#466286 = VERTEX_POINT('',#466287); +#466287 = CARTESIAN_POINT('',(136.060681,-139.308317,-7.5E-02)); +#466288 = LINE('',#466289,#466290); +#466289 = CARTESIAN_POINT('',(136.060681,-139.164272,-7.5E-02)); +#466290 = VECTOR('',#466291,1.); +#466291 = DIRECTION('',(0.,-1.,0.)); +#466292 = ORIENTED_EDGE('',*,*,#466293,.T.); +#466293 = EDGE_CURVE('',#466286,#466260,#466294,.T.); +#466294 = LINE('',#466295,#466296); +#466295 = CARTESIAN_POINT('',(136.060681,-139.308317,-7.5E-02)); +#466296 = VECTOR('',#466297,1.); +#466297 = DIRECTION('',(-1.,0.,0.)); +#466298 = PLANE('',#466299); +#466299 = AXIS2_PLACEMENT_3D('',#466300,#466301,#466302); +#466300 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466301 = DIRECTION('',(-0.,-0.,-1.)); +#466302 = DIRECTION('',(-1.,0.,0.)); +#466303 = SHELL_BASED_SURFACE_MODEL('',(#466304)); +#466304 = OPEN_SHELL('',(#466305)); +#466305 = ADVANCED_FACE('',(#466306),#466380,.T.); +#466306 = FACE_BOUND('',#466307,.T.); +#466307 = EDGE_LOOP('',(#466308,#466318,#466326,#466334,#466342,#466350, + #466358,#466366,#466374)); +#466308 = ORIENTED_EDGE('',*,*,#466309,.T.); +#466309 = EDGE_CURVE('',#466310,#466312,#466314,.T.); +#466310 = VERTEX_POINT('',#466311); +#466311 = CARTESIAN_POINT('',(136.348771,-138.732136,-7.5E-02)); +#466312 = VERTEX_POINT('',#466313); +#466313 = CARTESIAN_POINT('',(136.348771,-138.444045,-7.5E-02)); +#466314 = LINE('',#466315,#466316); +#466315 = CARTESIAN_POINT('',(136.348771,-138.732136,-7.5E-02)); +#466316 = VECTOR('',#466317,1.); +#466317 = DIRECTION('',(0.,1.,0.)); +#466318 = ORIENTED_EDGE('',*,*,#466319,.T.); +#466319 = EDGE_CURVE('',#466312,#466320,#466322,.T.); +#466320 = VERTEX_POINT('',#466321); +#466321 = CARTESIAN_POINT('',(136.636862,-138.444045,-7.5E-02)); +#466322 = LINE('',#466323,#466324); +#466323 = CARTESIAN_POINT('',(136.348771,-138.444045,-7.5E-02)); +#466324 = VECTOR('',#466325,1.); +#466325 = DIRECTION('',(1.,0.,0.)); +#466326 = ORIENTED_EDGE('',*,*,#466327,.T.); +#466327 = EDGE_CURVE('',#466320,#466328,#466330,.T.); +#466328 = VERTEX_POINT('',#466329); +#466329 = CARTESIAN_POINT('',(136.636862,-138.588091,-7.5E-02)); +#466330 = LINE('',#466331,#466332); +#466331 = CARTESIAN_POINT('',(136.636862,-138.444045,-7.5E-02)); +#466332 = VECTOR('',#466333,1.); +#466333 = DIRECTION('',(0.,-1.,0.)); +#466334 = ORIENTED_EDGE('',*,*,#466335,.T.); +#466335 = EDGE_CURVE('',#466328,#466336,#466338,.T.); +#466336 = VERTEX_POINT('',#466337); +#466337 = CARTESIAN_POINT('',(136.636862,-138.732136,-7.5E-02)); +#466338 = LINE('',#466339,#466340); +#466339 = CARTESIAN_POINT('',(136.636862,-138.588091,-7.5E-02)); +#466340 = VECTOR('',#466341,1.); +#466341 = DIRECTION('',(0.,-1.,0.)); +#466342 = ORIENTED_EDGE('',*,*,#466343,.T.); +#466343 = EDGE_CURVE('',#466336,#466344,#466346,.T.); +#466344 = VERTEX_POINT('',#466345); +#466345 = CARTESIAN_POINT('',(136.924953,-138.732136,-7.5E-02)); +#466346 = LINE('',#466347,#466348); +#466347 = CARTESIAN_POINT('',(136.636862,-138.732136,-7.5E-02)); +#466348 = VECTOR('',#466349,1.); +#466349 = DIRECTION('',(1.,0.,0.)); +#466350 = ORIENTED_EDGE('',*,*,#466351,.T.); +#466351 = EDGE_CURVE('',#466344,#466352,#466354,.T.); +#466352 = VERTEX_POINT('',#466353); +#466353 = CARTESIAN_POINT('',(136.924953,-139.020227,-7.5E-02)); +#466354 = LINE('',#466355,#466356); +#466355 = CARTESIAN_POINT('',(136.924953,-138.732136,-7.5E-02)); +#466356 = VECTOR('',#466357,1.); +#466357 = DIRECTION('',(0.,-1.,0.)); +#466358 = ORIENTED_EDGE('',*,*,#466359,.T.); +#466359 = EDGE_CURVE('',#466352,#466360,#466362,.T.); +#466360 = VERTEX_POINT('',#466361); +#466361 = CARTESIAN_POINT('',(136.060681,-139.020227,-7.5E-02)); +#466362 = LINE('',#466363,#466364); +#466363 = CARTESIAN_POINT('',(136.924953,-139.020227,-7.5E-02)); +#466364 = VECTOR('',#466365,1.); +#466365 = DIRECTION('',(-1.,0.,0.)); +#466366 = ORIENTED_EDGE('',*,*,#466367,.T.); +#466367 = EDGE_CURVE('',#466360,#466368,#466370,.T.); +#466368 = VERTEX_POINT('',#466369); +#466369 = CARTESIAN_POINT('',(136.060681,-138.732136,-7.5E-02)); +#466370 = LINE('',#466371,#466372); +#466371 = CARTESIAN_POINT('',(136.060681,-139.020227,-7.5E-02)); +#466372 = VECTOR('',#466373,1.); +#466373 = DIRECTION('',(0.,1.,0.)); +#466374 = ORIENTED_EDGE('',*,*,#466375,.T.); +#466375 = EDGE_CURVE('',#466368,#466310,#466376,.T.); +#466376 = LINE('',#466377,#466378); +#466377 = CARTESIAN_POINT('',(136.060681,-138.732136,-7.5E-02)); +#466378 = VECTOR('',#466379,1.); +#466379 = DIRECTION('',(1.,0.,0.)); +#466380 = PLANE('',#466381); +#466381 = AXIS2_PLACEMENT_3D('',#466382,#466383,#466384); +#466382 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466383 = DIRECTION('',(-0.,-0.,-1.)); +#466384 = DIRECTION('',(-1.,0.,0.)); +#466385 = SHELL_BASED_SURFACE_MODEL('',(#466386)); +#466386 = OPEN_SHELL('',(#466387)); +#466387 = ADVANCED_FACE('',(#466388),#466424,.T.); +#466388 = FACE_BOUND('',#466389,.T.); +#466389 = EDGE_LOOP('',(#466390,#466401,#466409,#466418)); +#466390 = ORIENTED_EDGE('',*,*,#466391,.T.); +#466391 = EDGE_CURVE('',#466392,#466394,#466396,.T.); +#466392 = VERTEX_POINT('',#466393); +#466393 = CARTESIAN_POINT('',(153.052535,-138.659773,-7.5E-02)); +#466394 = VERTEX_POINT('',#466395); +#466395 = CARTESIAN_POINT('',(152.997065,-138.576567,-7.5E-02)); +#466396 = CIRCLE('',#466397,5.000039834453E-02); +#466397 = AXIS2_PLACEMENT_3D('',#466398,#466399,#466400); +#466398 = CARTESIAN_POINT('',(153.02480065037,-138.6181695664,-7.5E-02) + ); +#466399 = DIRECTION('',(0.,0.,-1.)); +#466400 = DIRECTION('',(0.554682573513,-0.832062042543,0.)); +#466401 = ORIENTED_EDGE('',*,*,#466402,.T.); +#466402 = EDGE_CURVE('',#466394,#466403,#466405,.T.); +#466403 = VERTEX_POINT('',#466404); +#466404 = CARTESIAN_POINT('',(154.282779,-137.719425,-7.5E-02)); +#466405 = LINE('',#466406,#466407); +#466406 = CARTESIAN_POINT('',(152.997065,-138.576567,-7.5E-02)); +#466407 = VECTOR('',#466408,1.); +#466408 = DIRECTION('',(0.832050493461,0.55469989754,0.)); +#466409 = ORIENTED_EDGE('',*,*,#466410,.T.); +#466410 = EDGE_CURVE('',#466403,#466411,#466413,.T.); +#466411 = VERTEX_POINT('',#466412); +#466412 = CARTESIAN_POINT('',(154.338249,-137.80263,-7.5E-02)); +#466413 = CIRCLE('',#466414,4.999998231262E-02); +#466414 = AXIS2_PLACEMENT_3D('',#466415,#466416,#466417); +#466415 = CARTESIAN_POINT('',(154.31051409846,-137.7610274343,-7.5E-02) + ); +#466416 = DIRECTION('',(0.,0.,-1.)); +#466417 = DIRECTION('',(-0.554702165484,0.832048981495,-0.)); +#466418 = ORIENTED_EDGE('',*,*,#466419,.T.); +#466419 = EDGE_CURVE('',#466411,#466392,#466420,.T.); +#466420 = LINE('',#466421,#466422); +#466421 = CARTESIAN_POINT('',(154.338249,-137.80263,-7.5E-02)); +#466422 = VECTOR('',#466423,1.); +#466423 = DIRECTION('',(-0.832050194776,-0.554700345568,0.)); +#466424 = PLANE('',#466425); +#466425 = AXIS2_PLACEMENT_3D('',#466426,#466427,#466428); +#466426 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466427 = DIRECTION('',(-0.,-0.,-1.)); +#466428 = DIRECTION('',(-1.,0.,0.)); +#466429 = SHELL_BASED_SURFACE_MODEL('',(#466430)); +#466430 = OPEN_SHELL('',(#466431)); +#466431 = ADVANCED_FACE('',(#466432),#466581,.T.); +#466432 = FACE_BOUND('',#466433,.T.); +#466433 = EDGE_LOOP('',(#466434,#466445,#466453,#466462,#466470,#466478, + #466486,#466494,#466502,#466510,#466518,#466527,#466535,#466543, + #466551,#466559,#466567,#466575)); +#466434 = ORIENTED_EDGE('',*,*,#466435,.T.); +#466435 = EDGE_CURVE('',#466436,#466438,#466440,.T.); +#466436 = VERTEX_POINT('',#466437); +#466437 = CARTESIAN_POINT('',(151.462475,-138.049126,-7.5E-02)); +#466438 = VERTEX_POINT('',#466439); +#466439 = CARTESIAN_POINT('',(151.462475,-137.949126,-7.5E-02)); +#466440 = CIRCLE('',#466441,5.000000000002E-02); +#466441 = AXIS2_PLACEMENT_3D('',#466442,#466443,#466444); +#466442 = CARTESIAN_POINT('',(151.46247504771,-137.999126,-7.5E-02)); +#466443 = DIRECTION('',(0.,0.,-1.)); +#466444 = DIRECTION('',(-9.542361567582E-07,-1.,-0.)); +#466445 = ORIENTED_EDGE('',*,*,#466446,.T.); +#466446 = EDGE_CURVE('',#466438,#466447,#466449,.T.); +#466447 = VERTEX_POINT('',#466448); +#466448 = CARTESIAN_POINT('',(152.462475,-137.949126,-7.5E-02)); +#466449 = LINE('',#466450,#466451); +#466450 = CARTESIAN_POINT('',(151.462475,-137.949126,-7.5E-02)); +#466451 = VECTOR('',#466452,1.); +#466452 = DIRECTION('',(1.,0.,0.)); +#466453 = ORIENTED_EDGE('',*,*,#466454,.T.); +#466454 = EDGE_CURVE('',#466447,#466455,#466457,.T.); +#466455 = VERTEX_POINT('',#466456); +#466456 = CARTESIAN_POINT('',(152.462475,-138.049126,-7.5E-02)); +#466457 = CIRCLE('',#466458,5.000000000003E-02); +#466458 = AXIS2_PLACEMENT_3D('',#466459,#466460,#466461); +#466459 = CARTESIAN_POINT('',(152.46247495228,-137.999126,-7.5E-02)); +#466460 = DIRECTION('',(0.,0.,-1.)); +#466461 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#466462 = ORIENTED_EDGE('',*,*,#466463,.T.); +#466463 = EDGE_CURVE('',#466455,#466464,#466466,.T.); +#466464 = VERTEX_POINT('',#466465); +#466465 = CARTESIAN_POINT('',(151.911757,-138.049126,-7.5E-02)); +#466466 = LINE('',#466467,#466468); +#466467 = CARTESIAN_POINT('',(152.462475,-138.049126,-7.5E-02)); +#466468 = VECTOR('',#466469,1.); +#466469 = DIRECTION('',(-1.,0.,0.)); +#466470 = ORIENTED_EDGE('',*,*,#466471,.T.); +#466471 = EDGE_CURVE('',#466464,#466472,#466474,.T.); +#466472 = VERTEX_POINT('',#466473); +#466473 = CARTESIAN_POINT('',(151.884519,-138.076362,-7.5E-02)); +#466474 = LINE('',#466475,#466476); +#466475 = CARTESIAN_POINT('',(151.911757,-138.049126,-7.5E-02)); +#466476 = VECTOR('',#466477,1.); +#466477 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#466478 = ORIENTED_EDGE('',*,*,#466479,.T.); +#466479 = EDGE_CURVE('',#466472,#466480,#466482,.T.); +#466480 = VERTEX_POINT('',#466481); +#466481 = CARTESIAN_POINT('',(151.845808,-138.153786,-7.5E-02)); +#466482 = LINE('',#466483,#466484); +#466483 = CARTESIAN_POINT('',(151.884519,-138.076362,-7.5E-02)); +#466484 = VECTOR('',#466485,1.); +#466485 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#466486 = ORIENTED_EDGE('',*,*,#466487,.T.); +#466487 = EDGE_CURVE('',#466480,#466488,#466490,.T.); +#466488 = VERTEX_POINT('',#466489); +#466489 = CARTESIAN_POINT('',(151.845808,-138.273037,-7.5E-02)); +#466490 = LINE('',#466491,#466492); +#466491 = CARTESIAN_POINT('',(151.845808,-138.153786,-7.5E-02)); +#466492 = VECTOR('',#466493,1.); +#466493 = DIRECTION('',(0.,-1.,0.)); +#466494 = ORIENTED_EDGE('',*,*,#466495,.T.); +#466495 = EDGE_CURVE('',#466488,#466496,#466498,.T.); +#466496 = VERTEX_POINT('',#466497); +#466497 = CARTESIAN_POINT('',(151.880694,-138.34281,-7.5E-02)); +#466498 = LINE('',#466499,#466500); +#466499 = CARTESIAN_POINT('',(151.845808,-138.273037,-7.5E-02)); +#466500 = VECTOR('',#466501,1.); +#466501 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#466502 = ORIENTED_EDGE('',*,*,#466503,.T.); +#466503 = EDGE_CURVE('',#466496,#466504,#466506,.T.); +#466504 = VERTEX_POINT('',#466505); +#466505 = CARTESIAN_POINT('',(151.950469,-138.377697,-7.5E-02)); +#466506 = LINE('',#466507,#466508); +#466507 = CARTESIAN_POINT('',(151.880694,-138.34281,-7.5E-02)); +#466508 = VECTOR('',#466509,1.); +#466509 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#466510 = ORIENTED_EDGE('',*,*,#466511,.T.); +#466511 = EDGE_CURVE('',#466504,#466512,#466514,.T.); +#466512 = VERTEX_POINT('',#466513); +#466513 = CARTESIAN_POINT('',(152.462475,-138.377697,-7.5E-02)); +#466514 = LINE('',#466515,#466516); +#466515 = CARTESIAN_POINT('',(151.950469,-138.377697,-7.5E-02)); +#466516 = VECTOR('',#466517,1.); +#466517 = DIRECTION('',(1.,0.,0.)); +#466518 = ORIENTED_EDGE('',*,*,#466519,.T.); +#466519 = EDGE_CURVE('',#466512,#466520,#466522,.T.); +#466520 = VERTEX_POINT('',#466521); +#466521 = CARTESIAN_POINT('',(152.462475,-138.477697,-7.5E-02)); +#466522 = CIRCLE('',#466523,5.000000000002E-02); +#466523 = AXIS2_PLACEMENT_3D('',#466524,#466525,#466526); +#466524 = CARTESIAN_POINT('',(152.46247495228,-138.427697,-7.5E-02)); +#466525 = DIRECTION('',(0.,0.,-1.)); +#466526 = DIRECTION('',(9.542367251923E-07,1.,0.)); +#466527 = ORIENTED_EDGE('',*,*,#466528,.T.); +#466528 = EDGE_CURVE('',#466520,#466529,#466531,.T.); +#466529 = VERTEX_POINT('',#466530); +#466530 = CARTESIAN_POINT('',(151.927392,-138.475454,-7.5E-02)); +#466531 = LINE('',#466532,#466533); +#466532 = CARTESIAN_POINT('',(152.462475,-138.477697,-7.5E-02)); +#466533 = VECTOR('',#466534,1.); +#466534 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#466535 = ORIENTED_EDGE('',*,*,#466536,.T.); +#466536 = EDGE_CURVE('',#466529,#466537,#466539,.T.); +#466537 = VERTEX_POINT('',#466538); +#466538 = CARTESIAN_POINT('',(151.810667,-138.41785,-7.5E-02)); +#466539 = LINE('',#466540,#466541); +#466540 = CARTESIAN_POINT('',(151.927392,-138.475454,-7.5E-02)); +#466541 = VECTOR('',#466542,1.); +#466542 = DIRECTION('',(-0.896745928687,0.44254574835,0.)); +#466543 = ORIENTED_EDGE('',*,*,#466544,.T.); +#466544 = EDGE_CURVE('',#466537,#466545,#466547,.T.); +#466545 = VERTEX_POINT('',#466546); +#466546 = CARTESIAN_POINT('',(151.798705,-138.402438,-7.5E-02)); +#466547 = LINE('',#466548,#466549); +#466548 = CARTESIAN_POINT('',(151.810667,-138.41785,-7.5E-02)); +#466549 = VECTOR('',#466550,1.); +#466550 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#466551 = ORIENTED_EDGE('',*,*,#466552,.T.); +#466552 = EDGE_CURVE('',#466545,#466553,#466555,.T.); +#466553 = VERTEX_POINT('',#466554); +#466554 = CARTESIAN_POINT('',(151.74805,-138.296112,-7.5E-02)); +#466555 = LINE('',#466556,#466557); +#466556 = CARTESIAN_POINT('',(151.798705,-138.402438,-7.5E-02)); +#466557 = VECTOR('',#466558,1.); +#466558 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#466559 = ORIENTED_EDGE('',*,*,#466560,.T.); +#466560 = EDGE_CURVE('',#466553,#466561,#466563,.T.); +#466561 = VERTEX_POINT('',#466562); +#466562 = CARTESIAN_POINT('',(151.74805,-138.13071,-7.5E-02)); +#466563 = LINE('',#466564,#466565); +#466564 = CARTESIAN_POINT('',(151.74805,-138.296112,-7.5E-02)); +#466565 = VECTOR('',#466566,1.); +#466566 = DIRECTION('',(0.,1.,0.)); +#466567 = ORIENTED_EDGE('',*,*,#466568,.T.); +#466568 = EDGE_CURVE('',#466561,#466569,#466571,.T.); +#466569 = VERTEX_POINT('',#466570); +#466570 = CARTESIAN_POINT('',(151.786335,-138.049126,-7.5E-02)); +#466571 = LINE('',#466572,#466573); +#466572 = CARTESIAN_POINT('',(151.74805,-138.13071,-7.5E-02)); +#466573 = VECTOR('',#466574,1.); +#466574 = DIRECTION('',(0.42482047438,0.90527761739,0.)); +#466575 = ORIENTED_EDGE('',*,*,#466576,.T.); +#466576 = EDGE_CURVE('',#466569,#466436,#466577,.T.); +#466577 = LINE('',#466578,#466579); +#466578 = CARTESIAN_POINT('',(151.786335,-138.049126,-7.5E-02)); +#466579 = VECTOR('',#466580,1.); +#466580 = DIRECTION('',(-1.,0.,0.)); +#466581 = PLANE('',#466582); +#466582 = AXIS2_PLACEMENT_3D('',#466583,#466584,#466585); +#466583 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466584 = DIRECTION('',(-0.,-0.,-1.)); +#466585 = DIRECTION('',(-1.,0.,0.)); +#466586 = SHELL_BASED_SURFACE_MODEL('',(#466587)); +#466587 = OPEN_SHELL('',(#466588)); +#466588 = ADVANCED_FACE('',(#466589),#466631,.T.); +#466589 = FACE_BOUND('',#466590,.T.); +#466590 = EDGE_LOOP('',(#466591,#466601,#466609,#466617,#466625)); +#466591 = ORIENTED_EDGE('',*,*,#466592,.T.); +#466592 = EDGE_CURVE('',#466593,#466595,#466597,.T.); +#466593 = VERTEX_POINT('',#466594); +#466594 = CARTESIAN_POINT('',(128.858412,-138.444045,-7.5E-02)); +#466595 = VERTEX_POINT('',#466596); +#466596 = CARTESIAN_POINT('',(128.858412,-138.155954,-7.5E-02)); +#466597 = LINE('',#466598,#466599); +#466598 = CARTESIAN_POINT('',(128.858412,-138.444045,-7.5E-02)); +#466599 = VECTOR('',#466600,1.); +#466600 = DIRECTION('',(0.,1.,0.)); +#466601 = ORIENTED_EDGE('',*,*,#466602,.T.); +#466602 = EDGE_CURVE('',#466595,#466603,#466605,.T.); +#466603 = VERTEX_POINT('',#466604); +#466604 = CARTESIAN_POINT('',(129.146503,-138.155954,-7.5E-02)); +#466605 = LINE('',#466606,#466607); +#466606 = CARTESIAN_POINT('',(128.858412,-138.155954,-7.5E-02)); +#466607 = VECTOR('',#466608,1.); +#466608 = DIRECTION('',(1.,0.,0.)); +#466609 = ORIENTED_EDGE('',*,*,#466610,.T.); +#466610 = EDGE_CURVE('',#466603,#466611,#466613,.T.); +#466611 = VERTEX_POINT('',#466612); +#466612 = CARTESIAN_POINT('',(129.146503,-138.3,-7.5E-02)); +#466613 = LINE('',#466614,#466615); +#466614 = CARTESIAN_POINT('',(129.146503,-138.155954,-7.5E-02)); +#466615 = VECTOR('',#466616,1.); +#466616 = DIRECTION('',(0.,-1.,0.)); +#466617 = ORIENTED_EDGE('',*,*,#466618,.T.); +#466618 = EDGE_CURVE('',#466611,#466619,#466621,.T.); +#466619 = VERTEX_POINT('',#466620); +#466620 = CARTESIAN_POINT('',(129.146503,-138.444045,-7.5E-02)); +#466621 = LINE('',#466622,#466623); +#466622 = CARTESIAN_POINT('',(129.146503,-138.3,-7.5E-02)); +#466623 = VECTOR('',#466624,1.); +#466624 = DIRECTION('',(0.,-1.,0.)); +#466625 = ORIENTED_EDGE('',*,*,#466626,.T.); +#466626 = EDGE_CURVE('',#466619,#466593,#466627,.T.); +#466627 = LINE('',#466628,#466629); +#466628 = CARTESIAN_POINT('',(129.146503,-138.444045,-7.5E-02)); +#466629 = VECTOR('',#466630,1.); +#466630 = DIRECTION('',(-1.,0.,0.)); +#466631 = PLANE('',#466632); +#466632 = AXIS2_PLACEMENT_3D('',#466633,#466634,#466635); +#466633 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466634 = DIRECTION('',(-0.,-0.,-1.)); +#466635 = DIRECTION('',(-1.,0.,0.)); +#466636 = SHELL_BASED_SURFACE_MODEL('',(#466637)); +#466637 = OPEN_SHELL('',(#466638)); +#466638 = ADVANCED_FACE('',(#466639),#466681,.T.); +#466639 = FACE_BOUND('',#466640,.T.); +#466640 = EDGE_LOOP('',(#466641,#466651,#466659,#466667,#466675)); +#466641 = ORIENTED_EDGE('',*,*,#466642,.T.); +#466642 = EDGE_CURVE('',#466643,#466645,#466647,.T.); +#466643 = VERTEX_POINT('',#466644); +#466644 = CARTESIAN_POINT('',(136.636862,-138.444045,-7.5E-02)); +#466645 = VERTEX_POINT('',#466646); +#466646 = CARTESIAN_POINT('',(136.636862,-138.155954,-7.5E-02)); +#466647 = LINE('',#466648,#466649); +#466648 = CARTESIAN_POINT('',(136.636862,-138.444045,-7.5E-02)); +#466649 = VECTOR('',#466650,1.); +#466650 = DIRECTION('',(0.,1.,0.)); +#466651 = ORIENTED_EDGE('',*,*,#466652,.T.); +#466652 = EDGE_CURVE('',#466645,#466653,#466655,.T.); +#466653 = VERTEX_POINT('',#466654); +#466654 = CARTESIAN_POINT('',(136.924953,-138.155954,-7.5E-02)); +#466655 = LINE('',#466656,#466657); +#466656 = CARTESIAN_POINT('',(136.636862,-138.155954,-7.5E-02)); +#466657 = VECTOR('',#466658,1.); +#466658 = DIRECTION('',(1.,0.,0.)); +#466659 = ORIENTED_EDGE('',*,*,#466660,.T.); +#466660 = EDGE_CURVE('',#466653,#466661,#466663,.T.); +#466661 = VERTEX_POINT('',#466662); +#466662 = CARTESIAN_POINT('',(136.924953,-138.3,-7.5E-02)); +#466663 = LINE('',#466664,#466665); +#466664 = CARTESIAN_POINT('',(136.924953,-138.155954,-7.5E-02)); +#466665 = VECTOR('',#466666,1.); +#466666 = DIRECTION('',(0.,-1.,0.)); +#466667 = ORIENTED_EDGE('',*,*,#466668,.T.); +#466668 = EDGE_CURVE('',#466661,#466669,#466671,.T.); +#466669 = VERTEX_POINT('',#466670); +#466670 = CARTESIAN_POINT('',(136.924953,-138.444045,-7.5E-02)); +#466671 = LINE('',#466672,#466673); +#466672 = CARTESIAN_POINT('',(136.924953,-138.3,-7.5E-02)); +#466673 = VECTOR('',#466674,1.); +#466674 = DIRECTION('',(0.,-1.,0.)); +#466675 = ORIENTED_EDGE('',*,*,#466676,.T.); +#466676 = EDGE_CURVE('',#466669,#466643,#466677,.T.); +#466677 = LINE('',#466678,#466679); +#466678 = CARTESIAN_POINT('',(136.924953,-138.444045,-7.5E-02)); +#466679 = VECTOR('',#466680,1.); +#466680 = DIRECTION('',(-1.,0.,0.)); +#466681 = PLANE('',#466682); +#466682 = AXIS2_PLACEMENT_3D('',#466683,#466684,#466685); +#466683 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466684 = DIRECTION('',(-0.,-0.,-1.)); +#466685 = DIRECTION('',(-1.,0.,0.)); +#466686 = SHELL_BASED_SURFACE_MODEL('',(#466687)); +#466687 = OPEN_SHELL('',(#466688)); +#466688 = ADVANCED_FACE('',(#466689),#466763,.T.); +#466689 = FACE_BOUND('',#466690,.T.); +#466690 = EDGE_LOOP('',(#466691,#466701,#466709,#466717,#466725,#466733, + #466741,#466749,#466757)); +#466691 = ORIENTED_EDGE('',*,*,#466692,.T.); +#466692 = EDGE_CURVE('',#466693,#466695,#466697,.T.); +#466693 = VERTEX_POINT('',#466694); +#466694 = CARTESIAN_POINT('',(134.620227,-137.291682,-7.5E-02)); +#466695 = VERTEX_POINT('',#466696); +#466696 = CARTESIAN_POINT('',(134.620227,-136.715501,-7.5E-02)); +#466697 = LINE('',#466698,#466699); +#466698 = CARTESIAN_POINT('',(134.620227,-137.291682,-7.5E-02)); +#466699 = VECTOR('',#466700,1.); +#466700 = DIRECTION('',(0.,1.,0.)); +#466701 = ORIENTED_EDGE('',*,*,#466702,.T.); +#466702 = EDGE_CURVE('',#466695,#466703,#466705,.T.); +#466703 = VERTEX_POINT('',#466704); +#466704 = CARTESIAN_POINT('',(134.908318,-136.715501,-7.5E-02)); +#466705 = LINE('',#466706,#466707); +#466706 = CARTESIAN_POINT('',(134.620227,-136.715501,-7.5E-02)); +#466707 = VECTOR('',#466708,1.); +#466708 = DIRECTION('',(1.,0.,0.)); +#466709 = ORIENTED_EDGE('',*,*,#466710,.T.); +#466710 = EDGE_CURVE('',#466703,#466711,#466713,.T.); +#466711 = VERTEX_POINT('',#466712); +#466712 = CARTESIAN_POINT('',(134.908318,-137.291682,-7.5E-02)); +#466713 = LINE('',#466714,#466715); +#466714 = CARTESIAN_POINT('',(134.908318,-136.715501,-7.5E-02)); +#466715 = VECTOR('',#466716,1.); +#466716 = DIRECTION('',(0.,-1.,0.)); +#466717 = ORIENTED_EDGE('',*,*,#466718,.T.); +#466718 = EDGE_CURVE('',#466711,#466719,#466721,.T.); +#466719 = VERTEX_POINT('',#466720); +#466720 = CARTESIAN_POINT('',(134.908318,-137.867864,-7.5E-02)); +#466721 = LINE('',#466722,#466723); +#466722 = CARTESIAN_POINT('',(134.908318,-137.291682,-7.5E-02)); +#466723 = VECTOR('',#466724,1.); +#466724 = DIRECTION('',(0.,-1.,0.)); +#466725 = ORIENTED_EDGE('',*,*,#466726,.T.); +#466726 = EDGE_CURVE('',#466719,#466727,#466729,.T.); +#466727 = VERTEX_POINT('',#466728); +#466728 = CARTESIAN_POINT('',(134.620227,-137.867864,-7.5E-02)); +#466729 = LINE('',#466730,#466731); +#466730 = CARTESIAN_POINT('',(134.908318,-137.867864,-7.5E-02)); +#466731 = VECTOR('',#466732,1.); +#466732 = DIRECTION('',(-1.,0.,0.)); +#466733 = ORIENTED_EDGE('',*,*,#466734,.T.); +#466734 = EDGE_CURVE('',#466727,#466735,#466737,.T.); +#466735 = VERTEX_POINT('',#466736); +#466736 = CARTESIAN_POINT('',(134.620227,-137.579773,-7.5E-02)); +#466737 = LINE('',#466738,#466739); +#466738 = CARTESIAN_POINT('',(134.620227,-137.867864,-7.5E-02)); +#466739 = VECTOR('',#466740,1.); +#466740 = DIRECTION('',(0.,1.,0.)); +#466741 = ORIENTED_EDGE('',*,*,#466742,.T.); +#466742 = EDGE_CURVE('',#466735,#466743,#466745,.T.); +#466743 = VERTEX_POINT('',#466744); +#466744 = CARTESIAN_POINT('',(134.332136,-137.579773,-7.5E-02)); +#466745 = LINE('',#466746,#466747); +#466746 = CARTESIAN_POINT('',(134.620227,-137.579773,-7.5E-02)); +#466747 = VECTOR('',#466748,1.); +#466748 = DIRECTION('',(-1.,0.,0.)); +#466749 = ORIENTED_EDGE('',*,*,#466750,.T.); +#466750 = EDGE_CURVE('',#466743,#466751,#466753,.T.); +#466751 = VERTEX_POINT('',#466752); +#466752 = CARTESIAN_POINT('',(134.332136,-137.291682,-7.5E-02)); +#466753 = LINE('',#466754,#466755); +#466754 = CARTESIAN_POINT('',(134.332136,-137.579773,-7.5E-02)); +#466755 = VECTOR('',#466756,1.); +#466756 = DIRECTION('',(0.,1.,0.)); +#466757 = ORIENTED_EDGE('',*,*,#466758,.T.); +#466758 = EDGE_CURVE('',#466751,#466693,#466759,.T.); +#466759 = LINE('',#466760,#466761); +#466760 = CARTESIAN_POINT('',(134.332136,-137.291682,-7.5E-02)); +#466761 = VECTOR('',#466762,1.); +#466762 = DIRECTION('',(1.,0.,0.)); +#466763 = PLANE('',#466764); +#466764 = AXIS2_PLACEMENT_3D('',#466765,#466766,#466767); +#466765 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466766 = DIRECTION('',(-0.,-0.,-1.)); +#466767 = DIRECTION('',(-1.,0.,0.)); +#466768 = SHELL_BASED_SURFACE_MODEL('',(#466769)); +#466769 = OPEN_SHELL('',(#466770)); +#466770 = ADVANCED_FACE('',(#466771),#466937,.T.); +#466771 = FACE_BOUND('',#466772,.T.); +#466772 = EDGE_LOOP('',(#466773,#466784,#466792,#466800,#466808,#466816, + #466824,#466832,#466841,#466849,#466857,#466865,#466873,#466881, + #466890,#466898,#466906,#466915,#466923,#466931)); +#466773 = ORIENTED_EDGE('',*,*,#466774,.T.); +#466774 = EDGE_CURVE('',#466775,#466777,#466779,.T.); +#466775 = VERTEX_POINT('',#466776); +#466776 = CARTESIAN_POINT('',(151.749614,-137.265706,-7.5E-02)); +#466777 = VERTEX_POINT('',#466778); +#466778 = CARTESIAN_POINT('',(151.845808,-137.28484,-7.5E-02)); +#466779 = CIRCLE('',#466780,4.999998452108E-02); +#466780 = AXIS2_PLACEMENT_3D('',#466781,#466782,#466783); +#466781 = CARTESIAN_POINT('',(151.79580801547,-137.2848400373,-7.5E-02) + ); +#466782 = DIRECTION('',(0.,0.,-1.)); +#466783 = DIRECTION('',(-0.923880595592,0.382680865851,0.)); +#466784 = ORIENTED_EDGE('',*,*,#466785,.T.); +#466785 = EDGE_CURVE('',#466777,#466786,#466788,.T.); +#466786 = VERTEX_POINT('',#466787); +#466787 = CARTESIAN_POINT('',(151.845808,-137.377697,-7.5E-02)); +#466788 = LINE('',#466789,#466790); +#466789 = CARTESIAN_POINT('',(151.845808,-137.28484,-7.5E-02)); +#466790 = VECTOR('',#466791,1.); +#466791 = DIRECTION('',(0.,-1.,0.)); +#466792 = ORIENTED_EDGE('',*,*,#466793,.T.); +#466793 = EDGE_CURVE('',#466786,#466794,#466796,.T.); +#466794 = VERTEX_POINT('',#466795); +#466795 = CARTESIAN_POINT('',(152.330885,-137.379938,-7.5E-02)); +#466796 = LINE('',#466797,#466798); +#466797 = CARTESIAN_POINT('',(151.845808,-137.377697,-7.5E-02)); +#466798 = VECTOR('',#466799,1.); +#466799 = DIRECTION('',(0.999989328502,-4.619835789308E-03,0.)); +#466800 = ORIENTED_EDGE('',*,*,#466801,.T.); +#466801 = EDGE_CURVE('',#466794,#466802,#466804,.T.); +#466802 = VERTEX_POINT('',#466803); +#466803 = CARTESIAN_POINT('',(152.447616,-137.437543,-7.5E-02)); +#466804 = LINE('',#466805,#466806); +#466805 = CARTESIAN_POINT('',(152.330885,-137.379938,-7.5E-02)); +#466806 = VECTOR('',#466807,1.); +#466807 = DIRECTION('',(0.896751907126,-0.442533633825,0.)); +#466808 = ORIENTED_EDGE('',*,*,#466809,.T.); +#466809 = EDGE_CURVE('',#466802,#466810,#466812,.T.); +#466810 = VERTEX_POINT('',#466811); +#466811 = CARTESIAN_POINT('',(152.459577,-137.452955,-7.5E-02)); +#466812 = LINE('',#466813,#466814); +#466813 = CARTESIAN_POINT('',(152.447616,-137.437543,-7.5E-02)); +#466814 = VECTOR('',#466815,1.); +#466815 = DIRECTION('',(0.613106329879,-0.790000397634,0.)); +#466816 = ORIENTED_EDGE('',*,*,#466817,.T.); +#466817 = EDGE_CURVE('',#466810,#466818,#466820,.T.); +#466818 = VERTEX_POINT('',#466819); +#466819 = CARTESIAN_POINT('',(152.510232,-137.559281,-7.5E-02)); +#466820 = LINE('',#466821,#466822); +#466821 = CARTESIAN_POINT('',(152.459577,-137.452955,-7.5E-02)); +#466822 = VECTOR('',#466823,1.); +#466823 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#466824 = ORIENTED_EDGE('',*,*,#466825,.T.); +#466825 = EDGE_CURVE('',#466818,#466826,#466828,.T.); +#466826 = VERTEX_POINT('',#466827); +#466827 = CARTESIAN_POINT('',(152.512475,-137.665792,-7.5E-02)); +#466828 = LINE('',#466829,#466830); +#466829 = CARTESIAN_POINT('',(152.510232,-137.559281,-7.5E-02)); +#466830 = VECTOR('',#466831,1.); +#466831 = DIRECTION('',(2.10541897794E-02,-0.999778335979,0.)); +#466832 = ORIENTED_EDGE('',*,*,#466833,.T.); +#466833 = EDGE_CURVE('',#466826,#466834,#466836,.T.); +#466834 = VERTEX_POINT('',#466835); +#466835 = CARTESIAN_POINT('',(152.412475,-137.665792,-7.5E-02)); +#466836 = CIRCLE('',#466837,5.000000000001E-02); +#466837 = AXIS2_PLACEMENT_3D('',#466838,#466839,#466840); +#466838 = CARTESIAN_POINT('',(152.462475,-137.6657919522,-7.5E-02)); +#466839 = DIRECTION('',(-0.,0.,-1.)); +#466840 = DIRECTION('',(1.,-9.542361567582E-07,-0.)); +#466841 = ORIENTED_EDGE('',*,*,#466842,.T.); +#466842 = EDGE_CURVE('',#466834,#466843,#466845,.T.); +#466843 = VERTEX_POINT('',#466844); +#466844 = CARTESIAN_POINT('',(152.412475,-137.582357,-7.5E-02)); +#466845 = LINE('',#466846,#466847); +#466846 = CARTESIAN_POINT('',(152.412475,-137.665792,-7.5E-02)); +#466847 = VECTOR('',#466848,1.); +#466848 = DIRECTION('',(0.,1.,0.)); +#466849 = ORIENTED_EDGE('',*,*,#466850,.T.); +#466850 = EDGE_CURVE('',#466843,#466851,#466853,.T.); +#466851 = VERTEX_POINT('',#466852); +#466852 = CARTESIAN_POINT('',(152.377588,-137.512583,-7.5E-02)); +#466853 = LINE('',#466854,#466855); +#466854 = CARTESIAN_POINT('',(152.412475,-137.582357,-7.5E-02)); +#466855 = VECTOR('',#466856,1.); +#466856 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#466857 = ORIENTED_EDGE('',*,*,#466858,.T.); +#466858 = EDGE_CURVE('',#466851,#466859,#466861,.T.); +#466859 = VERTEX_POINT('',#466860); +#466860 = CARTESIAN_POINT('',(152.307815,-137.477697,-7.5E-02)); +#466861 = LINE('',#466862,#466863); +#466862 = CARTESIAN_POINT('',(152.377588,-137.512583,-7.5E-02)); +#466863 = VECTOR('',#466864,1.); +#466864 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#466865 = ORIENTED_EDGE('',*,*,#466866,.T.); +#466866 = EDGE_CURVE('',#466859,#466867,#466869,.T.); +#466867 = VERTEX_POINT('',#466868); +#466868 = CARTESIAN_POINT('',(151.845808,-137.477697,-7.5E-02)); +#466869 = LINE('',#466870,#466871); +#466870 = CARTESIAN_POINT('',(152.307815,-137.477697,-7.5E-02)); +#466871 = VECTOR('',#466872,1.); +#466872 = DIRECTION('',(-1.,0.,0.)); +#466873 = ORIENTED_EDGE('',*,*,#466874,.T.); +#466874 = EDGE_CURVE('',#466867,#466875,#466877,.T.); +#466875 = VERTEX_POINT('',#466876); +#466876 = CARTESIAN_POINT('',(151.845808,-137.665792,-7.5E-02)); +#466877 = LINE('',#466878,#466879); +#466878 = CARTESIAN_POINT('',(151.845808,-137.477697,-7.5E-02)); +#466879 = VECTOR('',#466880,1.); +#466880 = DIRECTION('',(0.,-1.,0.)); +#466881 = ORIENTED_EDGE('',*,*,#466882,.T.); +#466882 = EDGE_CURVE('',#466875,#466883,#466885,.T.); +#466883 = VERTEX_POINT('',#466884); +#466884 = CARTESIAN_POINT('',(151.745808,-137.665792,-7.5E-02)); +#466885 = CIRCLE('',#466886,5.000000000002E-02); +#466886 = AXIS2_PLACEMENT_3D('',#466887,#466888,#466889); +#466887 = CARTESIAN_POINT('',(151.795808,-137.6657919522,-7.5E-02)); +#466888 = DIRECTION('',(-0.,0.,-1.)); +#466889 = DIRECTION('',(1.,-9.542367251918E-07,-0.)); +#466890 = ORIENTED_EDGE('',*,*,#466891,.T.); +#466891 = EDGE_CURVE('',#466883,#466892,#466894,.T.); +#466892 = VERTEX_POINT('',#466893); +#466893 = CARTESIAN_POINT('',(151.745808,-137.477697,-7.5E-02)); +#466894 = LINE('',#466895,#466896); +#466895 = CARTESIAN_POINT('',(151.745808,-137.665792,-7.5E-02)); +#466896 = VECTOR('',#466897,1.); +#466897 = DIRECTION('',(0.,1.,0.)); +#466898 = ORIENTED_EDGE('',*,*,#466899,.T.); +#466899 = EDGE_CURVE('',#466892,#466900,#466902,.T.); +#466900 = VERTEX_POINT('',#466901); +#466901 = CARTESIAN_POINT('',(151.462475,-137.477697,-7.5E-02)); +#466902 = LINE('',#466903,#466904); +#466903 = CARTESIAN_POINT('',(151.745808,-137.477697,-7.5E-02)); +#466904 = VECTOR('',#466905,1.); +#466905 = DIRECTION('',(-1.,0.,0.)); +#466906 = ORIENTED_EDGE('',*,*,#466907,.T.); +#466907 = EDGE_CURVE('',#466900,#466908,#466910,.T.); +#466908 = VERTEX_POINT('',#466909); +#466909 = CARTESIAN_POINT('',(151.462475,-137.377697,-7.5E-02)); +#466910 = CIRCLE('',#466911,5.000000000002E-02); +#466911 = AXIS2_PLACEMENT_3D('',#466912,#466913,#466914); +#466912 = CARTESIAN_POINT('',(151.46247504771,-137.427697,-7.5E-02)); +#466913 = DIRECTION('',(0.,0.,-1.)); +#466914 = DIRECTION('',(-9.542361567576E-07,-1.,-0.)); +#466915 = ORIENTED_EDGE('',*,*,#466916,.T.); +#466916 = EDGE_CURVE('',#466908,#466917,#466919,.T.); +#466917 = VERTEX_POINT('',#466918); +#466918 = CARTESIAN_POINT('',(151.745808,-137.377697,-7.5E-02)); +#466919 = LINE('',#466920,#466921); +#466920 = CARTESIAN_POINT('',(151.462475,-137.377697,-7.5E-02)); +#466921 = VECTOR('',#466922,1.); +#466922 = DIRECTION('',(1.,0.,0.)); +#466923 = ORIENTED_EDGE('',*,*,#466924,.T.); +#466924 = EDGE_CURVE('',#466917,#466925,#466927,.T.); +#466925 = VERTEX_POINT('',#466926); +#466926 = CARTESIAN_POINT('',(151.745808,-137.28484,-7.5E-02)); +#466927 = LINE('',#466928,#466929); +#466928 = CARTESIAN_POINT('',(151.745808,-137.377697,-7.5E-02)); +#466929 = VECTOR('',#466930,1.); +#466930 = DIRECTION('',(0.,1.,0.)); +#466931 = ORIENTED_EDGE('',*,*,#466932,.T.); +#466932 = EDGE_CURVE('',#466925,#466775,#466933,.T.); +#466933 = LINE('',#466934,#466935); +#466934 = CARTESIAN_POINT('',(151.745808,-137.28484,-7.5E-02)); +#466935 = VECTOR('',#466936,1.); +#466936 = DIRECTION('',(0.195090852694,0.980785174845,0.)); +#466937 = PLANE('',#466938); +#466938 = AXIS2_PLACEMENT_3D('',#466939,#466940,#466941); +#466939 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#466940 = DIRECTION('',(-0.,-0.,-1.)); +#466941 = DIRECTION('',(-1.,0.,0.)); +#466942 = SHELL_BASED_SURFACE_MODEL('',(#466943)); +#466943 = OPEN_SHELL('',(#466944)); +#466944 = ADVANCED_FACE('',(#466945),#467051,.T.); +#466945 = FACE_BOUND('',#466946,.T.); +#466946 = EDGE_LOOP('',(#466947,#466957,#466965,#466973,#466981,#466989, + #466997,#467005,#467013,#467021,#467029,#467037,#467045)); +#466947 = ORIENTED_EDGE('',*,*,#466948,.T.); +#466948 = EDGE_CURVE('',#466949,#466951,#466953,.T.); +#466949 = VERTEX_POINT('',#466950); +#466950 = CARTESIAN_POINT('',(128.858412,-136.42741,-7.5E-02)); +#466951 = VERTEX_POINT('',#466952); +#466952 = CARTESIAN_POINT('',(129.146503,-136.42741,-7.5E-02)); +#466953 = LINE('',#466954,#466955); +#466954 = CARTESIAN_POINT('',(128.858412,-136.42741,-7.5E-02)); +#466955 = VECTOR('',#466956,1.); +#466956 = DIRECTION('',(1.,0.,0.)); +#466957 = ORIENTED_EDGE('',*,*,#466958,.T.); +#466958 = EDGE_CURVE('',#466951,#466959,#466961,.T.); +#466959 = VERTEX_POINT('',#466960); +#466960 = CARTESIAN_POINT('',(129.434594,-136.42741,-7.5E-02)); +#466961 = LINE('',#466962,#466963); +#466962 = CARTESIAN_POINT('',(129.146503,-136.42741,-7.5E-02)); +#466963 = VECTOR('',#466964,1.); +#466964 = DIRECTION('',(1.,0.,0.)); +#466965 = ORIENTED_EDGE('',*,*,#466966,.T.); +#466966 = EDGE_CURVE('',#466959,#466967,#466969,.T.); +#466967 = VERTEX_POINT('',#466968); +#466968 = CARTESIAN_POINT('',(129.434594,-136.715501,-7.5E-02)); +#466969 = LINE('',#466970,#466971); +#466970 = CARTESIAN_POINT('',(129.434594,-136.42741,-7.5E-02)); +#466971 = VECTOR('',#466972,1.); +#466972 = DIRECTION('',(0.,-1.,0.)); +#466973 = ORIENTED_EDGE('',*,*,#466974,.T.); +#466974 = EDGE_CURVE('',#466967,#466975,#466977,.T.); +#466975 = VERTEX_POINT('',#466976); +#466976 = CARTESIAN_POINT('',(129.146503,-136.715501,-7.5E-02)); +#466977 = LINE('',#466978,#466979); +#466978 = CARTESIAN_POINT('',(129.434594,-136.715501,-7.5E-02)); +#466979 = VECTOR('',#466980,1.); +#466980 = DIRECTION('',(-1.,0.,0.)); +#466981 = ORIENTED_EDGE('',*,*,#466982,.T.); +#466982 = EDGE_CURVE('',#466975,#466983,#466985,.T.); +#466983 = VERTEX_POINT('',#466984); +#466984 = CARTESIAN_POINT('',(129.146503,-137.003592,-7.5E-02)); +#466985 = LINE('',#466986,#466987); +#466986 = CARTESIAN_POINT('',(129.146503,-136.715501,-7.5E-02)); +#466987 = VECTOR('',#466988,1.); +#466988 = DIRECTION('',(0.,-1.,0.)); +#466989 = ORIENTED_EDGE('',*,*,#466990,.T.); +#466990 = EDGE_CURVE('',#466983,#466991,#466993,.T.); +#466991 = VERTEX_POINT('',#466992); +#466992 = CARTESIAN_POINT('',(129.434594,-137.003592,-7.5E-02)); +#466993 = LINE('',#466994,#466995); +#466994 = CARTESIAN_POINT('',(129.146503,-137.003592,-7.5E-02)); +#466995 = VECTOR('',#466996,1.); +#466996 = DIRECTION('',(1.,0.,0.)); +#466997 = ORIENTED_EDGE('',*,*,#466998,.T.); +#466998 = EDGE_CURVE('',#466991,#466999,#467001,.T.); +#466999 = VERTEX_POINT('',#467000); +#467000 = CARTESIAN_POINT('',(129.434594,-137.291682,-7.5E-02)); +#467001 = LINE('',#467002,#467003); +#467002 = CARTESIAN_POINT('',(129.434594,-137.003592,-7.5E-02)); +#467003 = VECTOR('',#467004,1.); +#467004 = DIRECTION('',(0.,-1.,0.)); +#467005 = ORIENTED_EDGE('',*,*,#467006,.T.); +#467006 = EDGE_CURVE('',#466999,#467007,#467009,.T.); +#467007 = VERTEX_POINT('',#467008); +#467008 = CARTESIAN_POINT('',(129.146503,-137.291682,-7.5E-02)); +#467009 = LINE('',#467010,#467011); +#467010 = CARTESIAN_POINT('',(129.434594,-137.291682,-7.5E-02)); +#467011 = VECTOR('',#467012,1.); +#467012 = DIRECTION('',(-1.,0.,0.)); +#467013 = ORIENTED_EDGE('',*,*,#467014,.T.); +#467014 = EDGE_CURVE('',#467007,#467015,#467017,.T.); +#467015 = VERTEX_POINT('',#467016); +#467016 = CARTESIAN_POINT('',(129.146503,-137.579773,-7.5E-02)); +#467017 = LINE('',#467018,#467019); +#467018 = CARTESIAN_POINT('',(129.146503,-137.291682,-7.5E-02)); +#467019 = VECTOR('',#467020,1.); +#467020 = DIRECTION('',(0.,-1.,0.)); +#467021 = ORIENTED_EDGE('',*,*,#467022,.T.); +#467022 = EDGE_CURVE('',#467015,#467023,#467025,.T.); +#467023 = VERTEX_POINT('',#467024); +#467024 = CARTESIAN_POINT('',(128.570322,-137.579773,-7.5E-02)); +#467025 = LINE('',#467026,#467027); +#467026 = CARTESIAN_POINT('',(129.146503,-137.579773,-7.5E-02)); +#467027 = VECTOR('',#467028,1.); +#467028 = DIRECTION('',(-1.,0.,0.)); +#467029 = ORIENTED_EDGE('',*,*,#467030,.T.); +#467030 = EDGE_CURVE('',#467023,#467031,#467033,.T.); +#467031 = VERTEX_POINT('',#467032); +#467032 = CARTESIAN_POINT('',(128.570322,-137.291682,-7.5E-02)); +#467033 = LINE('',#467034,#467035); +#467034 = CARTESIAN_POINT('',(128.570322,-137.579773,-7.5E-02)); +#467035 = VECTOR('',#467036,1.); +#467036 = DIRECTION('',(0.,1.,0.)); +#467037 = ORIENTED_EDGE('',*,*,#467038,.T.); +#467038 = EDGE_CURVE('',#467031,#467039,#467041,.T.); +#467039 = VERTEX_POINT('',#467040); +#467040 = CARTESIAN_POINT('',(128.858412,-137.291682,-7.5E-02)); +#467041 = LINE('',#467042,#467043); +#467042 = CARTESIAN_POINT('',(128.570322,-137.291682,-7.5E-02)); +#467043 = VECTOR('',#467044,1.); +#467044 = DIRECTION('',(1.,0.,0.)); +#467045 = ORIENTED_EDGE('',*,*,#467046,.T.); +#467046 = EDGE_CURVE('',#467039,#466949,#467047,.T.); +#467047 = LINE('',#467048,#467049); +#467048 = CARTESIAN_POINT('',(128.858412,-137.291682,-7.5E-02)); +#467049 = VECTOR('',#467050,1.); +#467050 = DIRECTION('',(0.,1.,0.)); +#467051 = PLANE('',#467052); +#467052 = AXIS2_PLACEMENT_3D('',#467053,#467054,#467055); +#467053 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#467054 = DIRECTION('',(-0.,-0.,-1.)); +#467055 = DIRECTION('',(-1.,0.,0.)); +#467056 = SHELL_BASED_SURFACE_MODEL('',(#467057)); +#467057 = OPEN_SHELL('',(#467058)); +#467058 = ADVANCED_FACE('',(#467059),#467208,.T.); +#467059 = FACE_BOUND('',#467060,.T.); +#467060 = EDGE_LOOP('',(#467061,#467072,#467080,#467089,#467097,#467105, + #467113,#467121,#467129,#467137,#467145,#467154,#467162,#467170, + #467178,#467186,#467194,#467202)); +#467061 = ORIENTED_EDGE('',*,*,#467062,.T.); +#467062 = EDGE_CURVE('',#467063,#467065,#467067,.T.); +#467063 = VERTEX_POINT('',#467064); +#467064 = CARTESIAN_POINT('',(153.386618,-137.045317,-7.5E-02)); +#467065 = VERTEX_POINT('',#467066); +#467066 = CARTESIAN_POINT('',(153.405752,-136.949123,-7.5E-02)); +#467067 = CIRCLE('',#467068,4.999998452111E-02); +#467068 = AXIS2_PLACEMENT_3D('',#467069,#467070,#467071); +#467069 = CARTESIAN_POINT('',(153.40575203736,-136.9991229845,-7.5E-02) + ); +#467070 = DIRECTION('',(0.,0.,-1.)); +#467071 = DIRECTION('',(-0.382680865852,-0.923880595592,-0.)); +#467072 = ORIENTED_EDGE('',*,*,#467073,.T.); +#467073 = EDGE_CURVE('',#467065,#467074,#467076,.T.); +#467074 = VERTEX_POINT('',#467075); +#467075 = CARTESIAN_POINT('',(154.072419,-136.949123,-7.5E-02)); +#467076 = LINE('',#467077,#467078); +#467077 = CARTESIAN_POINT('',(153.405752,-136.949123,-7.5E-02)); +#467078 = VECTOR('',#467079,1.); +#467079 = DIRECTION('',(1.,0.,0.)); +#467080 = ORIENTED_EDGE('',*,*,#467081,.T.); +#467081 = EDGE_CURVE('',#467074,#467082,#467084,.T.); +#467082 = VERTEX_POINT('',#467083); +#467083 = CARTESIAN_POINT('',(154.072419,-137.049123,-7.5E-02)); +#467084 = CIRCLE('',#467085,5.000000000003E-02); +#467085 = AXIS2_PLACEMENT_3D('',#467086,#467087,#467088); +#467086 = CARTESIAN_POINT('',(154.07241895228,-136.999123,-7.5E-02)); +#467087 = DIRECTION('',(0.,0.,-1.)); +#467088 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#467089 = ORIENTED_EDGE('',*,*,#467090,.T.); +#467090 = EDGE_CURVE('',#467082,#467091,#467093,.T.); +#467091 = VERTEX_POINT('',#467092); +#467092 = CARTESIAN_POINT('',(153.521701,-137.049123,-7.5E-02)); +#467093 = LINE('',#467094,#467095); +#467094 = CARTESIAN_POINT('',(154.072419,-137.049123,-7.5E-02)); +#467095 = VECTOR('',#467096,1.); +#467096 = DIRECTION('',(-1.,0.,0.)); +#467097 = ORIENTED_EDGE('',*,*,#467098,.T.); +#467098 = EDGE_CURVE('',#467091,#467099,#467101,.T.); +#467099 = VERTEX_POINT('',#467100); +#467100 = CARTESIAN_POINT('',(153.494463,-137.076359,-7.5E-02)); +#467101 = LINE('',#467102,#467103); +#467102 = CARTESIAN_POINT('',(153.521701,-137.049123,-7.5E-02)); +#467103 = VECTOR('',#467104,1.); +#467104 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#467105 = ORIENTED_EDGE('',*,*,#467106,.T.); +#467106 = EDGE_CURVE('',#467099,#467107,#467109,.T.); +#467107 = VERTEX_POINT('',#467108); +#467108 = CARTESIAN_POINT('',(153.455752,-137.153783,-7.5E-02)); +#467109 = LINE('',#467110,#467111); +#467110 = CARTESIAN_POINT('',(153.494463,-137.076359,-7.5E-02)); +#467111 = VECTOR('',#467112,1.); +#467112 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#467113 = ORIENTED_EDGE('',*,*,#467114,.T.); +#467114 = EDGE_CURVE('',#467107,#467115,#467117,.T.); +#467115 = VERTEX_POINT('',#467116); +#467116 = CARTESIAN_POINT('',(153.455752,-137.273034,-7.5E-02)); +#467117 = LINE('',#467118,#467119); +#467118 = CARTESIAN_POINT('',(153.455752,-137.153783,-7.5E-02)); +#467119 = VECTOR('',#467120,1.); +#467120 = DIRECTION('',(0.,-1.,0.)); +#467121 = ORIENTED_EDGE('',*,*,#467122,.T.); +#467122 = EDGE_CURVE('',#467115,#467123,#467125,.T.); +#467123 = VERTEX_POINT('',#467124); +#467124 = CARTESIAN_POINT('',(153.490638,-137.342807,-7.5E-02)); +#467125 = LINE('',#467126,#467127); +#467126 = CARTESIAN_POINT('',(153.455752,-137.273034,-7.5E-02)); +#467127 = VECTOR('',#467128,1.); +#467128 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#467129 = ORIENTED_EDGE('',*,*,#467130,.T.); +#467130 = EDGE_CURVE('',#467123,#467131,#467133,.T.); +#467131 = VERTEX_POINT('',#467132); +#467132 = CARTESIAN_POINT('',(153.560413,-137.377694,-7.5E-02)); +#467133 = LINE('',#467134,#467135); +#467134 = CARTESIAN_POINT('',(153.490638,-137.342807,-7.5E-02)); +#467135 = VECTOR('',#467136,1.); +#467136 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#467137 = ORIENTED_EDGE('',*,*,#467138,.T.); +#467138 = EDGE_CURVE('',#467131,#467139,#467141,.T.); +#467139 = VERTEX_POINT('',#467140); +#467140 = CARTESIAN_POINT('',(154.072419,-137.377694,-7.5E-02)); +#467141 = LINE('',#467142,#467143); +#467142 = CARTESIAN_POINT('',(153.560413,-137.377694,-7.5E-02)); +#467143 = VECTOR('',#467144,1.); +#467144 = DIRECTION('',(1.,0.,0.)); +#467145 = ORIENTED_EDGE('',*,*,#467146,.T.); +#467146 = EDGE_CURVE('',#467139,#467147,#467149,.T.); +#467147 = VERTEX_POINT('',#467148); +#467148 = CARTESIAN_POINT('',(154.072419,-137.477694,-7.5E-02)); +#467149 = CIRCLE('',#467150,5.000000000003E-02); +#467150 = AXIS2_PLACEMENT_3D('',#467151,#467152,#467153); +#467151 = CARTESIAN_POINT('',(154.07241895228,-137.427694,-7.5E-02)); +#467152 = DIRECTION('',(0.,0.,-1.)); +#467153 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#467154 = ORIENTED_EDGE('',*,*,#467155,.T.); +#467155 = EDGE_CURVE('',#467147,#467156,#467158,.T.); +#467156 = VERTEX_POINT('',#467157); +#467157 = CARTESIAN_POINT('',(153.537336,-137.475451,-7.5E-02)); +#467158 = LINE('',#467159,#467160); +#467159 = CARTESIAN_POINT('',(154.072419,-137.477694,-7.5E-02)); +#467160 = VECTOR('',#467161,1.); +#467161 = DIRECTION('',(-0.999991214216,4.191836207668E-03,0.)); +#467162 = ORIENTED_EDGE('',*,*,#467163,.T.); +#467163 = EDGE_CURVE('',#467156,#467164,#467166,.T.); +#467164 = VERTEX_POINT('',#467165); +#467165 = CARTESIAN_POINT('',(153.420611,-137.417847,-7.5E-02)); +#467166 = LINE('',#467167,#467168); +#467167 = CARTESIAN_POINT('',(153.537336,-137.475451,-7.5E-02)); +#467168 = VECTOR('',#467169,1.); +#467169 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#467170 = ORIENTED_EDGE('',*,*,#467171,.T.); +#467171 = EDGE_CURVE('',#467164,#467172,#467174,.T.); +#467172 = VERTEX_POINT('',#467173); +#467173 = CARTESIAN_POINT('',(153.408649,-137.402435,-7.5E-02)); +#467174 = LINE('',#467175,#467176); +#467175 = CARTESIAN_POINT('',(153.420611,-137.417847,-7.5E-02)); +#467176 = VECTOR('',#467177,1.); +#467177 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#467178 = ORIENTED_EDGE('',*,*,#467179,.T.); +#467179 = EDGE_CURVE('',#467172,#467180,#467182,.T.); +#467180 = VERTEX_POINT('',#467181); +#467181 = CARTESIAN_POINT('',(153.357994,-137.296109,-7.5E-02)); +#467182 = LINE('',#467183,#467184); +#467183 = CARTESIAN_POINT('',(153.408649,-137.402435,-7.5E-02)); +#467184 = VECTOR('',#467185,1.); +#467185 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#467186 = ORIENTED_EDGE('',*,*,#467187,.T.); +#467187 = EDGE_CURVE('',#467180,#467188,#467190,.T.); +#467188 = VERTEX_POINT('',#467189); +#467189 = CARTESIAN_POINT('',(153.357994,-137.130707,-7.5E-02)); +#467190 = LINE('',#467191,#467192); +#467191 = CARTESIAN_POINT('',(153.357994,-137.296109,-7.5E-02)); +#467192 = VECTOR('',#467193,1.); +#467193 = DIRECTION('',(0.,1.,0.)); +#467194 = ORIENTED_EDGE('',*,*,#467195,.T.); +#467195 = EDGE_CURVE('',#467188,#467196,#467198,.T.); +#467196 = VERTEX_POINT('',#467197); +#467197 = CARTESIAN_POINT('',(153.397135,-137.047409,-7.5E-02)); +#467198 = LINE('',#467199,#467200); +#467199 = CARTESIAN_POINT('',(153.357994,-137.130707,-7.5E-02)); +#467200 = VECTOR('',#467201,1.); +#467201 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#467202 = ORIENTED_EDGE('',*,*,#467203,.T.); +#467203 = EDGE_CURVE('',#467196,#467063,#467204,.T.); +#467204 = LINE('',#467205,#467206); +#467205 = CARTESIAN_POINT('',(153.397135,-137.047409,-7.5E-02)); +#467206 = VECTOR('',#467207,1.); +#467207 = DIRECTION('',(-0.980784591045,0.195093787624,0.)); +#467208 = PLANE('',#467209); +#467209 = AXIS2_PLACEMENT_3D('',#467210,#467211,#467212); +#467210 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#467211 = DIRECTION('',(-0.,-0.,-1.)); +#467212 = DIRECTION('',(-1.,0.,0.)); +#467213 = SHELL_BASED_SURFACE_MODEL('',(#467214)); +#467214 = OPEN_SHELL('',(#467215)); +#467215 = ADVANCED_FACE('',(#467216,#467652),#467721,.T.); +#467216 = FACE_BOUND('',#467217,.T.); +#467217 = EDGE_LOOP('',(#467218,#467228,#467236,#467244,#467252,#467260, + #467268,#467276,#467284,#467292,#467301,#467309,#467317,#467325, + #467333,#467341,#467349,#467357,#467365,#467373,#467381,#467389, + #467397,#467405,#467413,#467421,#467429,#467437,#467445,#467453, + #467462,#467470,#467478,#467486,#467494,#467502,#467510,#467518, + #467526,#467534,#467542,#467550,#467558,#467566,#467574,#467582, + #467590,#467598,#467606,#467614,#467622,#467630,#467638,#467646)); +#467218 = ORIENTED_EDGE('',*,*,#467219,.T.); +#467219 = EDGE_CURVE('',#467220,#467222,#467224,.T.); +#467220 = VERTEX_POINT('',#467221); +#467221 = CARTESIAN_POINT('',(151.761252,-136.202424,-7.5E-02)); +#467222 = VERTEX_POINT('',#467223); +#467223 = CARTESIAN_POINT('',(151.926538,-136.093476,-7.5E-02)); +#467224 = LINE('',#467225,#467226); +#467225 = CARTESIAN_POINT('',(151.761252,-136.202424,-7.5E-02)); +#467226 = VECTOR('',#467227,1.); +#467227 = DIRECTION('',(0.834936153591,0.550346817404,0.)); +#467228 = ORIENTED_EDGE('',*,*,#467229,.T.); +#467229 = EDGE_CURVE('',#467222,#467230,#467232,.T.); +#467230 = VERTEX_POINT('',#467231); +#467231 = CARTESIAN_POINT('',(152.129141,-136.045267,-7.5E-02)); +#467232 = LINE('',#467233,#467234); +#467233 = CARTESIAN_POINT('',(151.926538,-136.093476,-7.5E-02)); +#467234 = VECTOR('',#467235,1.); +#467235 = DIRECTION('',(0.972838457004,0.231485067712,0.)); +#467236 = ORIENTED_EDGE('',*,*,#467237,.T.); +#467237 = EDGE_CURVE('',#467230,#467238,#467240,.T.); +#467238 = VERTEX_POINT('',#467239); +#467239 = CARTESIAN_POINT('',(152.137798,-136.045688,-7.5E-02)); +#467240 = LINE('',#467241,#467242); +#467241 = CARTESIAN_POINT('',(152.129141,-136.045267,-7.5E-02)); +#467242 = VECTOR('',#467243,1.); +#467243 = DIRECTION('',(0.998819598186,-4.857376121677E-02,0.)); +#467244 = ORIENTED_EDGE('',*,*,#467245,.T.); +#467245 = EDGE_CURVE('',#467238,#467246,#467248,.T.); +#467246 = VERTEX_POINT('',#467247); +#467247 = CARTESIAN_POINT('',(152.347352,-136.10038,-7.5E-02)); +#467248 = LINE('',#467249,#467250); +#467249 = CARTESIAN_POINT('',(152.137798,-136.045688,-7.5E-02)); +#467250 = VECTOR('',#467251,1.); +#467251 = DIRECTION('',(0.967588237864,-0.252533169995,0.)); +#467252 = ORIENTED_EDGE('',*,*,#467253,.T.); +#467253 = EDGE_CURVE('',#467246,#467254,#467256,.T.); +#467254 = VERTEX_POINT('',#467255); +#467255 = CARTESIAN_POINT('',(152.49715,-136.202543,-7.5E-02)); +#467256 = LINE('',#467257,#467258); +#467257 = CARTESIAN_POINT('',(152.347352,-136.10038,-7.5E-02)); +#467258 = VECTOR('',#467259,1.); +#467259 = DIRECTION('',(0.82615546048,-0.563442237607,0.)); +#467260 = ORIENTED_EDGE('',*,*,#467261,.T.); +#467261 = EDGE_CURVE('',#467254,#467262,#467264,.T.); +#467262 = VERTEX_POINT('',#467263); +#467263 = CARTESIAN_POINT('',(152.60622,-136.367951,-7.5E-02)); +#467264 = LINE('',#467265,#467266); +#467265 = CARTESIAN_POINT('',(152.49715,-136.202543,-7.5E-02)); +#467266 = VECTOR('',#467267,1.); +#467267 = DIRECTION('',(0.5504931204,-0.834839699818,0.)); +#467268 = ORIENTED_EDGE('',*,*,#467269,.T.); +#467269 = EDGE_CURVE('',#467262,#467270,#467272,.T.); +#467270 = VERTEX_POINT('',#467271); +#467271 = CARTESIAN_POINT('',(152.654428,-136.570554,-7.5E-02)); +#467272 = LINE('',#467273,#467274); +#467273 = CARTESIAN_POINT('',(152.60622,-136.367951,-7.5E-02)); +#467274 = VECTOR('',#467275,1.); +#467275 = DIRECTION('',(0.231480523307,-0.972839538326,0.)); +#467276 = ORIENTED_EDGE('',*,*,#467277,.T.); +#467277 = EDGE_CURVE('',#467270,#467278,#467280,.T.); +#467278 = VERTEX_POINT('',#467279); +#467279 = CARTESIAN_POINT('',(152.599316,-136.788765,-7.5E-02)); +#467280 = LINE('',#467281,#467282); +#467281 = CARTESIAN_POINT('',(152.654428,-136.570554,-7.5E-02)); +#467282 = VECTOR('',#467283,1.); +#467283 = DIRECTION('',(-0.24487361144,-0.969555008455,0.)); +#467284 = ORIENTED_EDGE('',*,*,#467285,.T.); +#467285 = EDGE_CURVE('',#467278,#467286,#467288,.T.); +#467286 = VERTEX_POINT('',#467287); +#467287 = CARTESIAN_POINT('',(152.504078,-136.931623,-7.5E-02)); +#467288 = LINE('',#467289,#467290); +#467289 = CARTESIAN_POINT('',(152.599316,-136.788765,-7.5E-02)); +#467290 = VECTOR('',#467291,1.); +#467291 = DIRECTION('',(-0.55469750807,-0.832052086435,0.)); +#467292 = ORIENTED_EDGE('',*,*,#467293,.T.); +#467293 = EDGE_CURVE('',#467286,#467294,#467296,.T.); +#467294 = VERTEX_POINT('',#467295); +#467295 = CARTESIAN_POINT('',(152.420872,-136.876153,-7.5E-02)); +#467296 = CIRCLE('',#467297,5.000039834733E-02); +#467297 = AXIS2_PLACEMENT_3D('',#467298,#467299,#467300); +#467298 = CARTESIAN_POINT('',(152.46247552369,-136.9038872144,-7.5E-02) + ); +#467299 = DIRECTION('',(-0.,0.,-1.)); +#467300 = DIRECTION('',(0.832042897246,-0.554711291702,-0.)); +#467301 = ORIENTED_EDGE('',*,*,#467302,.T.); +#467302 = EDGE_CURVE('',#467294,#467303,#467305,.T.); +#467303 = VERTEX_POINT('',#467304); +#467304 = CARTESIAN_POINT('',(152.511306,-136.740502,-7.5E-02)); +#467305 = LINE('',#467306,#467307); +#467306 = CARTESIAN_POINT('',(152.420872,-136.876153,-7.5E-02)); +#467307 = VECTOR('',#467308,1.); +#467308 = DIRECTION('',(0.554700196225,0.832050294338,0.)); +#467309 = ORIENTED_EDGE('',*,*,#467310,.T.); +#467310 = EDGE_CURVE('',#467303,#467311,#467313,.T.); +#467311 = VERTEX_POINT('',#467312); +#467312 = CARTESIAN_POINT('',(152.553793,-136.570554,-7.5E-02)); +#467313 = LINE('',#467314,#467315); +#467314 = CARTESIAN_POINT('',(152.511306,-136.740502,-7.5E-02)); +#467315 = VECTOR('',#467316,1.); +#467316 = DIRECTION('',(0.242535625036,0.970142500145,0.)); +#467317 = ORIENTED_EDGE('',*,*,#467318,.T.); +#467318 = EDGE_CURVE('',#467311,#467319,#467321,.T.); +#467319 = VERTEX_POINT('',#467320); +#467320 = CARTESIAN_POINT('',(152.511306,-136.400605,-7.5E-02)); +#467321 = LINE('',#467322,#467323); +#467322 = CARTESIAN_POINT('',(152.553793,-136.570554,-7.5E-02)); +#467323 = VECTOR('',#467324,1.); +#467324 = DIRECTION('',(-0.242534281875,0.970142835935,0.)); +#467325 = ORIENTED_EDGE('',*,*,#467326,.T.); +#467326 = EDGE_CURVE('',#467319,#467327,#467329,.T.); +#467327 = VERTEX_POINT('',#467328); +#467328 = CARTESIAN_POINT('',(152.426419,-136.273276,-7.5E-02)); +#467329 = LINE('',#467330,#467331); +#467330 = CARTESIAN_POINT('',(152.511306,-136.400605,-7.5E-02)); +#467331 = VECTOR('',#467332,1.); +#467332 = DIRECTION('',(-0.554704720188,0.832047278345,0.)); +#467333 = ORIENTED_EDGE('',*,*,#467334,.T.); +#467334 = EDGE_CURVE('',#467327,#467335,#467337,.T.); +#467335 = VERTEX_POINT('',#467336); +#467336 = CARTESIAN_POINT('',(152.299086,-136.188389,-7.5E-02)); +#467337 = LINE('',#467338,#467339); +#467338 = CARTESIAN_POINT('',(152.426419,-136.273276,-7.5E-02)); +#467339 = VECTOR('',#467340,1.); +#467340 = DIRECTION('',(-0.832055320829,0.554692656414,0.)); +#467341 = ORIENTED_EDGE('',*,*,#467342,.T.); +#467342 = EDGE_CURVE('',#467335,#467343,#467345,.T.); +#467343 = VERTEX_POINT('',#467344); +#467344 = CARTESIAN_POINT('',(152.129141,-136.145902,-7.5E-02)); +#467345 = LINE('',#467346,#467347); +#467346 = CARTESIAN_POINT('',(152.299086,-136.188389,-7.5E-02)); +#467347 = VECTOR('',#467348,1.); +#467348 = DIRECTION('',(-0.970141492744,0.242539654607,0.)); +#467349 = ORIENTED_EDGE('',*,*,#467350,.T.); +#467350 = EDGE_CURVE('',#467343,#467351,#467353,.T.); +#467351 = VERTEX_POINT('',#467352); +#467352 = CARTESIAN_POINT('',(151.959192,-136.188389,-7.5E-02)); +#467353 = LINE('',#467354,#467355); +#467354 = CARTESIAN_POINT('',(152.129141,-136.145902,-7.5E-02)); +#467355 = VECTOR('',#467356,1.); +#467356 = DIRECTION('',(-0.970142835935,-0.242534281875,0.)); +#467357 = ORIENTED_EDGE('',*,*,#467358,.T.); +#467358 = EDGE_CURVE('',#467351,#467359,#467361,.T.); +#467359 = VERTEX_POINT('',#467360); +#467360 = CARTESIAN_POINT('',(151.831863,-136.273276,-7.5E-02)); +#467361 = LINE('',#467362,#467363); +#467362 = CARTESIAN_POINT('',(151.959192,-136.188389,-7.5E-02)); +#467363 = VECTOR('',#467364,1.); +#467364 = DIRECTION('',(-0.832047278345,-0.554704720188,0.)); +#467365 = ORIENTED_EDGE('',*,*,#467366,.T.); +#467366 = EDGE_CURVE('',#467359,#467367,#467369,.T.); +#467367 = VERTEX_POINT('',#467368); +#467368 = CARTESIAN_POINT('',(151.746976,-136.400608,-7.5E-02)); +#467369 = LINE('',#467370,#467371); +#467370 = CARTESIAN_POINT('',(151.831863,-136.273276,-7.5E-02)); +#467371 = VECTOR('',#467372,1.); +#467372 = DIRECTION('',(-0.55469567232,-0.832053310257,0.)); +#467373 = ORIENTED_EDGE('',*,*,#467374,.T.); +#467374 = EDGE_CURVE('',#467367,#467375,#467377,.T.); +#467375 = VERTEX_POINT('',#467376); +#467376 = CARTESIAN_POINT('',(151.704489,-136.570554,-7.5E-02)); +#467377 = LINE('',#467378,#467379); +#467378 = CARTESIAN_POINT('',(151.746976,-136.400608,-7.5E-02)); +#467379 = VECTOR('',#467380,1.); +#467380 = DIRECTION('',(-0.242538311402,-0.97014182855,0.)); +#467381 = ORIENTED_EDGE('',*,*,#467382,.T.); +#467382 = EDGE_CURVE('',#467375,#467383,#467385,.T.); +#467383 = VERTEX_POINT('',#467384); +#467384 = CARTESIAN_POINT('',(151.746976,-136.740499,-7.5E-02)); +#467385 = LINE('',#467386,#467387); +#467386 = CARTESIAN_POINT('',(151.704489,-136.570554,-7.5E-02)); +#467387 = VECTOR('',#467388,1.); +#467388 = DIRECTION('',(0.242539654607,-0.970141492744,0.)); +#467389 = ORIENTED_EDGE('',*,*,#467390,.T.); +#467390 = EDGE_CURVE('',#467383,#467391,#467393,.T.); +#467391 = VERTEX_POINT('',#467392); +#467392 = CARTESIAN_POINT('',(151.831863,-136.867832,-7.5E-02)); +#467393 = LINE('',#467394,#467395); +#467394 = CARTESIAN_POINT('',(151.746976,-136.740499,-7.5E-02)); +#467395 = VECTOR('',#467396,1.); +#467396 = DIRECTION('',(0.554692656414,-0.832055320829,0.)); +#467397 = ORIENTED_EDGE('',*,*,#467398,.T.); +#467398 = EDGE_CURVE('',#467391,#467399,#467401,.T.); +#467399 = VERTEX_POINT('',#467400); +#467400 = CARTESIAN_POINT('',(151.953803,-136.949126,-7.5E-02)); +#467401 = LINE('',#467402,#467403); +#467402 = CARTESIAN_POINT('',(151.831863,-136.867832,-7.5E-02)); +#467403 = VECTOR('',#467404,1.); +#467404 = DIRECTION('',(0.832048194817,-0.554703345493,0.)); +#467405 = ORIENTED_EDGE('',*,*,#467406,.T.); +#467406 = EDGE_CURVE('',#467399,#467407,#467409,.T.); +#467407 = VERTEX_POINT('',#467408); +#467408 = CARTESIAN_POINT('',(152.164957,-136.949126,-7.5E-02)); +#467409 = LINE('',#467410,#467411); +#467410 = CARTESIAN_POINT('',(151.953803,-136.949126,-7.5E-02)); +#467411 = VECTOR('',#467412,1.); +#467412 = DIRECTION('',(1.,0.,0.)); +#467413 = ORIENTED_EDGE('',*,*,#467414,.T.); +#467414 = EDGE_CURVE('',#467407,#467415,#467417,.T.); +#467415 = VERTEX_POINT('',#467416); +#467416 = CARTESIAN_POINT('',(152.23473,-136.914239,-7.5E-02)); +#467417 = LINE('',#467418,#467419); +#467418 = CARTESIAN_POINT('',(152.164957,-136.949126,-7.5E-02)); +#467419 = VECTOR('',#467420,1.); +#467420 = DIRECTION('',(0.894424627172,0.447218723118,0.)); +#467421 = ORIENTED_EDGE('',*,*,#467422,.T.); +#467422 = EDGE_CURVE('',#467415,#467423,#467425,.T.); +#467423 = VERTEX_POINT('',#467424); +#467424 = CARTESIAN_POINT('',(152.269617,-136.844464,-7.5E-02)); +#467425 = LINE('',#467426,#467427); +#467426 = CARTESIAN_POINT('',(152.23473,-136.914239,-7.5E-02)); +#467427 = VECTOR('',#467428,1.); +#467428 = DIRECTION('',(0.447208467984,0.89442975474,0.)); +#467429 = ORIENTED_EDGE('',*,*,#467430,.T.); +#467430 = EDGE_CURVE('',#467423,#467431,#467433,.T.); +#467431 = VERTEX_POINT('',#467432); +#467432 = CARTESIAN_POINT('',(152.269617,-136.829359,-7.5E-02)); +#467433 = LINE('',#467434,#467435); +#467434 = CARTESIAN_POINT('',(152.269617,-136.844464,-7.5E-02)); +#467435 = VECTOR('',#467436,1.); +#467436 = DIRECTION('',(0.,1.,0.)); +#467437 = ORIENTED_EDGE('',*,*,#467438,.T.); +#467438 = EDGE_CURVE('',#467431,#467439,#467441,.T.); +#467439 = VERTEX_POINT('',#467440); +#467440 = CARTESIAN_POINT('',(152.251288,-136.81103,-7.5E-02)); +#467441 = LINE('',#467442,#467443); +#467442 = CARTESIAN_POINT('',(152.269617,-136.829359,-7.5E-02)); +#467443 = VECTOR('',#467444,1.); +#467444 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#467445 = ORIENTED_EDGE('',*,*,#467446,.T.); +#467446 = EDGE_CURVE('',#467439,#467447,#467449,.T.); +#467447 = VERTEX_POINT('',#467448); +#467448 = CARTESIAN_POINT('',(151.891046,-136.81103,-7.5E-02)); +#467449 = LINE('',#467450,#467451); +#467450 = CARTESIAN_POINT('',(152.251288,-136.81103,-7.5E-02)); +#467451 = VECTOR('',#467452,1.); +#467452 = DIRECTION('',(-1.,0.,0.)); +#467453 = ORIENTED_EDGE('',*,*,#467454,.T.); +#467454 = EDGE_CURVE('',#467447,#467455,#467457,.T.); +#467455 = VERTEX_POINT('',#467456); +#467456 = CARTESIAN_POINT('',(151.882429,-136.712743,-7.5E-02)); +#467457 = CIRCLE('',#467458,4.949261299829E-02); +#467458 = AXIS2_PLACEMENT_3D('',#467459,#467460,#467461); +#467459 = CARTESIAN_POINT('',(151.8907062416,-136.7615385532,-7.5E-02)); +#467460 = DIRECTION('',(0.,0.,-1.)); +#467461 = DIRECTION('',(6.864830413859E-03,-0.999976436774,0.)); +#467462 = ORIENTED_EDGE('',*,*,#467463,.T.); +#467463 = EDGE_CURVE('',#467455,#467464,#467466,.T.); +#467464 = VERTEX_POINT('',#467465); +#467465 = CARTESIAN_POINT('',(151.843288,-136.629445,-7.5E-02)); +#467466 = LINE('',#467467,#467468); +#467467 = CARTESIAN_POINT('',(151.882429,-136.712743,-7.5E-02)); +#467468 = VECTOR('',#467469,1.); +#467469 = DIRECTION('',(-0.425280509062,0.905061593822,0.)); +#467470 = ORIENTED_EDGE('',*,*,#467471,.T.); +#467471 = EDGE_CURVE('',#467464,#467472,#467474,.T.); +#467472 = VERTEX_POINT('',#467473); +#467473 = CARTESIAN_POINT('',(151.843288,-136.511662,-7.5E-02)); +#467474 = LINE('',#467475,#467476); +#467475 = CARTESIAN_POINT('',(151.843288,-136.629445,-7.5E-02)); +#467476 = VECTOR('',#467477,1.); +#467477 = DIRECTION('',(0.,1.,0.)); +#467478 = ORIENTED_EDGE('',*,*,#467479,.T.); +#467479 = EDGE_CURVE('',#467472,#467480,#467482,.T.); +#467480 = VERTEX_POINT('',#467481); +#467481 = CARTESIAN_POINT('',(151.90331,-136.392342,-7.5E-02)); +#467482 = LINE('',#467483,#467484); +#467483 = CARTESIAN_POINT('',(151.843288,-136.511662,-7.5E-02)); +#467484 = VECTOR('',#467485,1.); +#467485 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#467486 = ORIENTED_EDGE('',*,*,#467487,.T.); +#467487 = EDGE_CURVE('',#467480,#467488,#467490,.T.); +#467488 = VERTEX_POINT('',#467489); +#467489 = CARTESIAN_POINT('',(151.963923,-136.335357,-7.5E-02)); +#467490 = LINE('',#467491,#467492); +#467491 = CARTESIAN_POINT('',(151.90331,-136.392342,-7.5E-02)); +#467492 = VECTOR('',#467493,1.); +#467493 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#467494 = ORIENTED_EDGE('',*,*,#467495,.T.); +#467495 = EDGE_CURVE('',#467488,#467496,#467498,.T.); +#467496 = VERTEX_POINT('',#467497); +#467497 = CARTESIAN_POINT('',(152.070249,-136.284701,-7.5E-02)); +#467498 = LINE('',#467499,#467500); +#467499 = CARTESIAN_POINT('',(151.963923,-136.335357,-7.5E-02)); +#467500 = VECTOR('',#467501,1.); +#467501 = DIRECTION('',(0.902779519658,0.430103637377,0.)); +#467502 = ORIENTED_EDGE('',*,*,#467503,.T.); +#467503 = EDGE_CURVE('',#467496,#467504,#467506,.T.); +#467504 = VERTEX_POINT('',#467505); +#467505 = CARTESIAN_POINT('',(152.188032,-136.284701,-7.5E-02)); +#467506 = LINE('',#467507,#467508); +#467507 = CARTESIAN_POINT('',(152.070249,-136.284701,-7.5E-02)); +#467508 = VECTOR('',#467509,1.); +#467509 = DIRECTION('',(1.,0.,0.)); +#467510 = ORIENTED_EDGE('',*,*,#467511,.T.); +#467511 = EDGE_CURVE('',#467504,#467512,#467514,.T.); +#467512 = VERTEX_POINT('',#467513); +#467513 = CARTESIAN_POINT('',(152.307353,-136.344723,-7.5E-02)); +#467514 = LINE('',#467515,#467516); +#467515 = CARTESIAN_POINT('',(152.188032,-136.284701,-7.5E-02)); +#467516 = VECTOR('',#467517,1.); +#467517 = DIRECTION('',(0.893341967462,-0.449377490726,0.)); +#467518 = ORIENTED_EDGE('',*,*,#467519,.T.); +#467519 = EDGE_CURVE('',#467512,#467520,#467522,.T.); +#467520 = VERTEX_POINT('',#467521); +#467521 = CARTESIAN_POINT('',(152.364338,-136.405336,-7.5E-02)); +#467522 = LINE('',#467523,#467524); +#467523 = CARTESIAN_POINT('',(152.307353,-136.344723,-7.5E-02)); +#467524 = VECTOR('',#467525,1.); +#467525 = DIRECTION('',(0.68496603593,-0.728574999312,0.)); +#467526 = ORIENTED_EDGE('',*,*,#467527,.T.); +#467527 = EDGE_CURVE('',#467520,#467528,#467530,.T.); +#467528 = VERTEX_POINT('',#467529); +#467529 = CARTESIAN_POINT('',(152.414993,-136.511662,-7.5E-02)); +#467530 = LINE('',#467531,#467532); +#467531 = CARTESIAN_POINT('',(152.364338,-136.405336,-7.5E-02)); +#467532 = VECTOR('',#467533,1.); +#467533 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#467534 = ORIENTED_EDGE('',*,*,#467535,.T.); +#467535 = EDGE_CURVE('',#467528,#467536,#467538,.T.); +#467536 = VERTEX_POINT('',#467537); +#467537 = CARTESIAN_POINT('',(152.414993,-136.629445,-7.5E-02)); +#467538 = LINE('',#467539,#467540); +#467539 = CARTESIAN_POINT('',(152.414993,-136.511662,-7.5E-02)); +#467540 = VECTOR('',#467541,1.); +#467541 = DIRECTION('',(0.,-1.,0.)); +#467542 = ORIENTED_EDGE('',*,*,#467543,.T.); +#467543 = EDGE_CURVE('',#467536,#467544,#467546,.T.); +#467544 = VERTEX_POINT('',#467545); +#467545 = CARTESIAN_POINT('',(152.354972,-136.748767,-7.5E-02)); +#467546 = LINE('',#467547,#467548); +#467547 = CARTESIAN_POINT('',(152.414993,-136.629445,-7.5E-02)); +#467548 = VECTOR('',#467549,1.); +#467549 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#467550 = ORIENTED_EDGE('',*,*,#467551,.T.); +#467551 = EDGE_CURVE('',#467544,#467552,#467554,.T.); +#467552 = VERTEX_POINT('',#467553); +#467553 = CARTESIAN_POINT('',(152.342708,-136.76103,-7.5E-02)); +#467554 = LINE('',#467555,#467556); +#467555 = CARTESIAN_POINT('',(152.354972,-136.748767,-7.5E-02)); +#467556 = VECTOR('',#467557,1.); +#467557 = DIRECTION('',(-0.707135610328,-0.707077950869,0.)); +#467558 = ORIENTED_EDGE('',*,*,#467559,.T.); +#467559 = EDGE_CURVE('',#467552,#467560,#467562,.T.); +#467560 = VERTEX_POINT('',#467561); +#467561 = CARTESIAN_POINT('',(152.365811,-136.789515,-7.5E-02)); +#467562 = LINE('',#467563,#467564); +#467563 = CARTESIAN_POINT('',(152.342708,-136.76103,-7.5E-02)); +#467564 = VECTOR('',#467565,1.); +#467565 = DIRECTION('',(0.629917995576,-0.776661650173,0.)); +#467566 = ORIENTED_EDGE('',*,*,#467567,.T.); +#467567 = EDGE_CURVE('',#467560,#467568,#467570,.T.); +#467568 = VERTEX_POINT('',#467569); +#467569 = CARTESIAN_POINT('',(152.369491,-136.859813,-7.5E-02)); +#467570 = LINE('',#467571,#467572); +#467571 = CARTESIAN_POINT('',(152.365811,-136.789515,-7.5E-02)); +#467572 = VECTOR('',#467573,1.); +#467573 = DIRECTION('',(5.227699298936E-02,-0.998632623142,0.)); +#467574 = ORIENTED_EDGE('',*,*,#467575,.T.); +#467575 = EDGE_CURVE('',#467568,#467576,#467578,.T.); +#467576 = VERTEX_POINT('',#467577); +#467577 = CARTESIAN_POINT('',(152.364338,-136.878629,-7.5E-02)); +#467578 = LINE('',#467579,#467580); +#467579 = CARTESIAN_POINT('',(152.369491,-136.859813,-7.5E-02)); +#467580 = VECTOR('',#467581,1.); +#467581 = DIRECTION('',(-0.26413652018,-0.964485302484,0.)); +#467582 = ORIENTED_EDGE('',*,*,#467583,.T.); +#467583 = EDGE_CURVE('',#467576,#467584,#467586,.T.); +#467584 = VERTEX_POINT('',#467585); +#467585 = CARTESIAN_POINT('',(152.306947,-136.986457,-7.5E-02)); +#467586 = LINE('',#467587,#467588); +#467587 = CARTESIAN_POINT('',(152.364338,-136.878629,-7.5E-02)); +#467588 = VECTOR('',#467589,1.); +#467589 = DIRECTION('',(-0.469840644168,-0.882751249836,0.)); +#467590 = ORIENTED_EDGE('',*,*,#467591,.T.); +#467591 = EDGE_CURVE('',#467584,#467592,#467594,.T.); +#467592 = VERTEX_POINT('',#467593); +#467593 = CARTESIAN_POINT('',(152.195894,-137.04532,-7.5E-02)); +#467594 = LINE('',#467595,#467596); +#467595 = CARTESIAN_POINT('',(152.306947,-136.986457,-7.5E-02)); +#467596 = VECTOR('',#467597,1.); +#467597 = DIRECTION('',(-0.883556735538,-0.468324134638,0.)); +#467598 = ORIENTED_EDGE('',*,*,#467599,.T.); +#467599 = EDGE_CURVE('',#467592,#467600,#467602,.T.); +#467600 = VERTEX_POINT('',#467601); +#467601 = CARTESIAN_POINT('',(152.17676,-137.049126,-7.5E-02)); +#467602 = LINE('',#467603,#467604); +#467603 = CARTESIAN_POINT('',(152.195894,-137.04532,-7.5E-02)); +#467604 = VECTOR('',#467605,1.); +#467605 = DIRECTION('',(-0.980785174845,-0.195090852694,0.)); +#467606 = ORIENTED_EDGE('',*,*,#467607,.T.); +#467607 = EDGE_CURVE('',#467600,#467608,#467610,.T.); +#467608 = VERTEX_POINT('',#467609); +#467609 = CARTESIAN_POINT('',(151.924383,-137.046285,-7.5E-02)); +#467610 = LINE('',#467611,#467612); +#467611 = CARTESIAN_POINT('',(152.17676,-137.049126,-7.5E-02)); +#467612 = VECTOR('',#467613,1.); +#467613 = DIRECTION('',(-0.999936646348,1.125625557109E-02,0.)); +#467614 = ORIENTED_EDGE('',*,*,#467615,.T.); +#467615 = EDGE_CURVE('',#467608,#467616,#467618,.T.); +#467616 = VERTEX_POINT('',#467617); +#467617 = CARTESIAN_POINT('',(151.76113,-136.938563,-7.5E-02)); +#467618 = LINE('',#467619,#467620); +#467619 = CARTESIAN_POINT('',(151.924383,-137.046285,-7.5E-02)); +#467620 = VECTOR('',#467621,1.); +#467621 = DIRECTION('',(-0.8346681177,0.550753241747,0.)); +#467622 = ORIENTED_EDGE('',*,*,#467623,.T.); +#467623 = EDGE_CURVE('',#467616,#467624,#467626,.T.); +#467624 = VERTEX_POINT('',#467625); +#467625 = CARTESIAN_POINT('',(151.652063,-136.773157,-7.5E-02)); +#467626 = LINE('',#467627,#467628); +#467627 = CARTESIAN_POINT('',(151.76113,-136.938563,-7.5E-02)); +#467628 = VECTOR('',#467629,1.); +#467629 = DIRECTION('',(-0.550487206411,0.834843599471,0.)); +#467630 = ORIENTED_EDGE('',*,*,#467631,.T.); +#467631 = EDGE_CURVE('',#467624,#467632,#467634,.T.); +#467632 = VERTEX_POINT('',#467633); +#467633 = CARTESIAN_POINT('',(151.603854,-136.570554,-7.5E-02)); +#467634 = LINE('',#467635,#467636); +#467635 = CARTESIAN_POINT('',(151.652063,-136.773157,-7.5E-02)); +#467636 = VECTOR('',#467637,1.); +#467637 = DIRECTION('',(-0.231485067712,0.972838457004,0.)); +#467638 = ORIENTED_EDGE('',*,*,#467639,.T.); +#467639 = EDGE_CURVE('',#467632,#467640,#467642,.T.); +#467640 = VERTEX_POINT('',#467641); +#467641 = CARTESIAN_POINT('',(151.658967,-136.352343,-7.5E-02)); +#467642 = LINE('',#467643,#467644); +#467643 = CARTESIAN_POINT('',(151.603854,-136.570554,-7.5E-02)); +#467644 = VECTOR('',#467645,1.); +#467645 = DIRECTION('',(0.244877788205,0.96955395355,0.)); +#467646 = ORIENTED_EDGE('',*,*,#467647,.T.); +#467647 = EDGE_CURVE('',#467640,#467220,#467648,.T.); +#467648 = LINE('',#467649,#467650); +#467649 = CARTESIAN_POINT('',(151.658967,-136.352343,-7.5E-02)); +#467650 = VECTOR('',#467651,1.); +#467651 = DIRECTION('',(0.563590693403,0.826054193325,0.)); +#467652 = FACE_BOUND('',#467653,.T.); +#467653 = EDGE_LOOP('',(#467654,#467665,#467673,#467682,#467690,#467698, + #467706,#467715)); +#467654 = ORIENTED_EDGE('',*,*,#467655,.T.); +#467655 = EDGE_CURVE('',#467656,#467658,#467660,.T.); +#467656 = VERTEX_POINT('',#467657); +#467657 = CARTESIAN_POINT('',(152.24238,-136.42117,-7.5E-02)); +#467658 = VERTEX_POINT('',#467659); +#467659 = CARTESIAN_POINT('',(152.015902,-136.42117,-7.5E-02)); +#467660 = CIRCLE('',#467661,0.172179472726); +#467661 = AXIS2_PLACEMENT_3D('',#467662,#467663,#467664); +#467662 = CARTESIAN_POINT('',(152.129141,-136.5508723504,-7.5E-02)); +#467663 = DIRECTION('',(0.,0.,1.)); +#467664 = DIRECTION('',(0.657680025426,0.753297407507,-0.)); +#467665 = ORIENTED_EDGE('',*,*,#467666,.T.); +#467666 = EDGE_CURVE('',#467658,#467667,#467669,.T.); +#467667 = VERTEX_POINT('',#467668); +#467668 = CARTESIAN_POINT('',(151.979757,-136.457314,-7.5E-02)); +#467669 = LINE('',#467670,#467671); +#467670 = CARTESIAN_POINT('',(152.015902,-136.42117,-7.5E-02)); +#467671 = VECTOR('',#467672,1.); +#467672 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#467673 = ORIENTED_EDGE('',*,*,#467674,.T.); +#467674 = EDGE_CURVE('',#467667,#467675,#467677,.T.); +#467675 = VERTEX_POINT('',#467676); +#467676 = CARTESIAN_POINT('',(151.979757,-136.683793,-7.5E-02)); +#467677 = CIRCLE('',#467678,0.172180554883); +#467678 = AXIS2_PLACEMENT_3D('',#467679,#467680,#467681); +#467679 = CARTESIAN_POINT('',(152.10946035045,-136.5705535,-7.5E-02)); +#467680 = DIRECTION('',(0.,0.,1.)); +#467681 = DIRECTION('',(-0.753298481029,0.657678795826,0.)); +#467682 = ORIENTED_EDGE('',*,*,#467683,.T.); +#467683 = EDGE_CURVE('',#467675,#467684,#467686,.T.); +#467684 = VERTEX_POINT('',#467685); +#467685 = CARTESIAN_POINT('',(152.006995,-136.71103,-7.5E-02)); +#467686 = LINE('',#467687,#467688); +#467687 = CARTESIAN_POINT('',(151.979757,-136.683793,-7.5E-02)); +#467688 = VECTOR('',#467689,1.); +#467689 = DIRECTION('',(0.707119761458,-0.707093800677,0.)); +#467690 = ORIENTED_EDGE('',*,*,#467691,.T.); +#467691 = EDGE_CURVE('',#467684,#467692,#467694,.T.); +#467692 = VERTEX_POINT('',#467693); +#467693 = CARTESIAN_POINT('',(152.251288,-136.71103,-7.5E-02)); +#467694 = LINE('',#467695,#467696); +#467695 = CARTESIAN_POINT('',(152.006995,-136.71103,-7.5E-02)); +#467696 = VECTOR('',#467697,1.); +#467697 = DIRECTION('',(1.,0.,0.)); +#467698 = ORIENTED_EDGE('',*,*,#467699,.T.); +#467699 = EDGE_CURVE('',#467692,#467700,#467702,.T.); +#467700 = VERTEX_POINT('',#467701); +#467701 = CARTESIAN_POINT('',(152.278524,-136.683792,-7.5E-02)); +#467702 = LINE('',#467703,#467704); +#467703 = CARTESIAN_POINT('',(152.251288,-136.71103,-7.5E-02)); +#467704 = VECTOR('',#467705,1.); +#467705 = DIRECTION('',(0.707080819453,0.707132741967,0.)); +#467706 = ORIENTED_EDGE('',*,*,#467707,.T.); +#467707 = EDGE_CURVE('',#467700,#467708,#467710,.T.); +#467708 = VERTEX_POINT('',#467709); +#467709 = CARTESIAN_POINT('',(152.278524,-136.457315,-7.5E-02)); +#467710 = CIRCLE('',#467711,0.172174416537); +#467711 = AXIS2_PLACEMENT_3D('',#467712,#467713,#467714); +#467712 = CARTESIAN_POINT('',(152.14882792516,-136.5705535,-7.5E-02)); +#467713 = DIRECTION('',(0.,-0.,1.)); +#467714 = DIRECTION('',(0.753283080283,-0.657696435265,-0.)); +#467715 = ORIENTED_EDGE('',*,*,#467716,.T.); +#467716 = EDGE_CURVE('',#467708,#467656,#467717,.T.); +#467717 = LINE('',#467718,#467719); +#467718 = CARTESIAN_POINT('',(152.278524,-136.457315,-7.5E-02)); +#467719 = VECTOR('',#467720,1.); +#467720 = DIRECTION('',(-0.707096999454,0.707116562784,0.)); +#467721 = PLANE('',#467722); +#467722 = AXIS2_PLACEMENT_3D('',#467723,#467724,#467725); +#467723 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#467724 = DIRECTION('',(-0.,-0.,-1.)); +#467725 = DIRECTION('',(-1.,0.,0.)); +#467726 = SHELL_BASED_SURFACE_MODEL('',(#467727)); +#467727 = OPEN_SHELL('',(#467728)); +#467728 = ADVANCED_FACE('',(#467729),#467771,.T.); +#467729 = FACE_BOUND('',#467730,.T.); +#467730 = EDGE_LOOP('',(#467731,#467741,#467749,#467757,#467765)); +#467731 = ORIENTED_EDGE('',*,*,#467732,.T.); +#467732 = EDGE_CURVE('',#467733,#467735,#467737,.T.); +#467733 = VERTEX_POINT('',#467734); +#467734 = CARTESIAN_POINT('',(130.298866,-137.003592,-7.5E-02)); +#467735 = VERTEX_POINT('',#467736); +#467736 = CARTESIAN_POINT('',(130.298866,-136.715501,-7.5E-02)); +#467737 = LINE('',#467738,#467739); +#467738 = CARTESIAN_POINT('',(130.298866,-137.003592,-7.5E-02)); +#467739 = VECTOR('',#467740,1.); +#467740 = DIRECTION('',(0.,1.,0.)); +#467741 = ORIENTED_EDGE('',*,*,#467742,.T.); +#467742 = EDGE_CURVE('',#467735,#467743,#467745,.T.); +#467743 = VERTEX_POINT('',#467744); +#467744 = CARTESIAN_POINT('',(130.875047,-136.715501,-7.5E-02)); +#467745 = LINE('',#467746,#467747); +#467746 = CARTESIAN_POINT('',(130.298866,-136.715501,-7.5E-02)); +#467747 = VECTOR('',#467748,1.); +#467748 = DIRECTION('',(1.,0.,0.)); +#467749 = ORIENTED_EDGE('',*,*,#467750,.T.); +#467750 = EDGE_CURVE('',#467743,#467751,#467753,.T.); +#467751 = VERTEX_POINT('',#467752); +#467752 = CARTESIAN_POINT('',(130.875047,-136.859546,-7.5E-02)); +#467753 = LINE('',#467754,#467755); +#467754 = CARTESIAN_POINT('',(130.875047,-136.715501,-7.5E-02)); +#467755 = VECTOR('',#467756,1.); +#467756 = DIRECTION('',(0.,-1.,0.)); +#467757 = ORIENTED_EDGE('',*,*,#467758,.T.); +#467758 = EDGE_CURVE('',#467751,#467759,#467761,.T.); +#467759 = VERTEX_POINT('',#467760); +#467760 = CARTESIAN_POINT('',(130.875047,-137.003592,-7.5E-02)); +#467761 = LINE('',#467762,#467763); +#467762 = CARTESIAN_POINT('',(130.875047,-136.859546,-7.5E-02)); +#467763 = VECTOR('',#467764,1.); +#467764 = DIRECTION('',(0.,-1.,0.)); +#467765 = ORIENTED_EDGE('',*,*,#467766,.T.); +#467766 = EDGE_CURVE('',#467759,#467733,#467767,.T.); +#467767 = LINE('',#467768,#467769); +#467768 = CARTESIAN_POINT('',(130.875047,-137.003592,-7.5E-02)); +#467769 = VECTOR('',#467770,1.); +#467770 = DIRECTION('',(-1.,0.,0.)); +#467771 = PLANE('',#467772); +#467772 = AXIS2_PLACEMENT_3D('',#467773,#467774,#467775); +#467773 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#467774 = DIRECTION('',(-0.,-0.,-1.)); +#467775 = DIRECTION('',(-1.,0.,0.)); +#467776 = SHELL_BASED_SURFACE_MODEL('',(#467777)); +#467777 = OPEN_SHELL('',(#467778)); +#467778 = ADVANCED_FACE('',(#467779),#467821,.T.); +#467779 = FACE_BOUND('',#467780,.T.); +#467780 = EDGE_LOOP('',(#467781,#467791,#467799,#467807,#467815)); +#467781 = ORIENTED_EDGE('',*,*,#467782,.T.); +#467782 = EDGE_CURVE('',#467783,#467785,#467787,.T.); +#467783 = VERTEX_POINT('',#467784); +#467784 = CARTESIAN_POINT('',(132.02741,-137.003592,-7.5E-02)); +#467785 = VERTEX_POINT('',#467786); +#467786 = CARTESIAN_POINT('',(132.02741,-136.715501,-7.5E-02)); +#467787 = LINE('',#467788,#467789); +#467788 = CARTESIAN_POINT('',(132.02741,-137.003592,-7.5E-02)); +#467789 = VECTOR('',#467790,1.); +#467790 = DIRECTION('',(0.,1.,0.)); +#467791 = ORIENTED_EDGE('',*,*,#467792,.T.); +#467792 = EDGE_CURVE('',#467785,#467793,#467795,.T.); +#467793 = VERTEX_POINT('',#467794); +#467794 = CARTESIAN_POINT('',(132.315501,-136.715501,-7.5E-02)); +#467795 = LINE('',#467796,#467797); +#467796 = CARTESIAN_POINT('',(132.02741,-136.715501,-7.5E-02)); +#467797 = VECTOR('',#467798,1.); +#467798 = DIRECTION('',(1.,0.,0.)); +#467799 = ORIENTED_EDGE('',*,*,#467800,.T.); +#467800 = EDGE_CURVE('',#467793,#467801,#467803,.T.); +#467801 = VERTEX_POINT('',#467802); +#467802 = CARTESIAN_POINT('',(132.315501,-136.859546,-7.5E-02)); +#467803 = LINE('',#467804,#467805); +#467804 = CARTESIAN_POINT('',(132.315501,-136.715501,-7.5E-02)); +#467805 = VECTOR('',#467806,1.); +#467806 = DIRECTION('',(0.,-1.,0.)); +#467807 = ORIENTED_EDGE('',*,*,#467808,.T.); +#467808 = EDGE_CURVE('',#467801,#467809,#467811,.T.); +#467809 = VERTEX_POINT('',#467810); +#467810 = CARTESIAN_POINT('',(132.315501,-137.003592,-7.5E-02)); +#467811 = LINE('',#467812,#467813); +#467812 = CARTESIAN_POINT('',(132.315501,-136.859546,-7.5E-02)); +#467813 = VECTOR('',#467814,1.); +#467814 = DIRECTION('',(0.,-1.,0.)); +#467815 = ORIENTED_EDGE('',*,*,#467816,.T.); +#467816 = EDGE_CURVE('',#467809,#467783,#467817,.T.); +#467817 = LINE('',#467818,#467819); +#467818 = CARTESIAN_POINT('',(132.315501,-137.003592,-7.5E-02)); +#467819 = VECTOR('',#467820,1.); +#467820 = DIRECTION('',(-1.,0.,0.)); +#467821 = PLANE('',#467822); +#467822 = AXIS2_PLACEMENT_3D('',#467823,#467824,#467825); +#467823 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#467824 = DIRECTION('',(-0.,-0.,-1.)); +#467825 = DIRECTION('',(-1.,0.,0.)); +#467826 = SHELL_BASED_SURFACE_MODEL('',(#467827)); +#467827 = OPEN_SHELL('',(#467828)); +#467828 = ADVANCED_FACE('',(#467829,#468161),#468195,.T.); +#467829 = FACE_BOUND('',#467830,.T.); +#467830 = EDGE_LOOP('',(#467831,#467841,#467849,#467857,#467865,#467873, + #467881,#467889,#467895,#467903,#467911,#467919,#467927,#467935, + #467943,#467951,#467957,#467965,#467973,#467981,#467989,#467997, + #468005,#468013,#468021,#468029,#468037,#468045,#468053,#468061, + #468069,#468077,#468085,#468093,#468101,#468109,#468117,#468125, + #468133,#468141,#468147,#468155)); +#467831 = ORIENTED_EDGE('',*,*,#467832,.T.); +#467832 = EDGE_CURVE('',#467833,#467835,#467837,.T.); +#467833 = VERTEX_POINT('',#467834); +#467834 = CARTESIAN_POINT('',(132.02741,-135.275047,-7.5E-02)); +#467835 = VERTEX_POINT('',#467836); +#467836 = CARTESIAN_POINT('',(132.02741,-134.698866,-7.5E-02)); +#467837 = LINE('',#467838,#467839); +#467838 = CARTESIAN_POINT('',(132.02741,-135.275047,-7.5E-02)); +#467839 = VECTOR('',#467840,1.); +#467840 = DIRECTION('',(0.,1.,0.)); +#467841 = ORIENTED_EDGE('',*,*,#467842,.T.); +#467842 = EDGE_CURVE('',#467835,#467843,#467845,.T.); +#467843 = VERTEX_POINT('',#467844); +#467844 = CARTESIAN_POINT('',(132.315501,-134.698866,-7.5E-02)); +#467845 = LINE('',#467846,#467847); +#467846 = CARTESIAN_POINT('',(132.02741,-134.698866,-7.5E-02)); +#467847 = VECTOR('',#467848,1.); +#467848 = DIRECTION('',(1.,0.,0.)); +#467849 = ORIENTED_EDGE('',*,*,#467850,.T.); +#467850 = EDGE_CURVE('',#467843,#467851,#467853,.T.); +#467851 = VERTEX_POINT('',#467852); +#467852 = CARTESIAN_POINT('',(132.315501,-134.986956,-7.5E-02)); +#467853 = LINE('',#467854,#467855); +#467854 = CARTESIAN_POINT('',(132.315501,-134.698866,-7.5E-02)); +#467855 = VECTOR('',#467856,1.); +#467856 = DIRECTION('',(0.,-1.,0.)); +#467857 = ORIENTED_EDGE('',*,*,#467858,.T.); +#467858 = EDGE_CURVE('',#467851,#467859,#467861,.T.); +#467859 = VERTEX_POINT('',#467860); +#467860 = CARTESIAN_POINT('',(132.603592,-134.986956,-7.5E-02)); +#467861 = LINE('',#467862,#467863); +#467862 = CARTESIAN_POINT('',(132.315501,-134.986956,-7.5E-02)); +#467863 = VECTOR('',#467864,1.); +#467864 = DIRECTION('',(1.,0.,0.)); +#467865 = ORIENTED_EDGE('',*,*,#467866,.T.); +#467866 = EDGE_CURVE('',#467859,#467867,#467869,.T.); +#467867 = VERTEX_POINT('',#467868); +#467868 = CARTESIAN_POINT('',(132.603592,-134.698866,-7.5E-02)); +#467869 = LINE('',#467870,#467871); +#467870 = CARTESIAN_POINT('',(132.603592,-134.986956,-7.5E-02)); +#467871 = VECTOR('',#467872,1.); +#467872 = DIRECTION('',(0.,1.,0.)); +#467873 = ORIENTED_EDGE('',*,*,#467874,.T.); +#467874 = EDGE_CURVE('',#467867,#467875,#467877,.T.); +#467875 = VERTEX_POINT('',#467876); +#467876 = CARTESIAN_POINT('',(132.891683,-134.698866,-7.5E-02)); +#467877 = LINE('',#467878,#467879); +#467878 = CARTESIAN_POINT('',(132.603592,-134.698866,-7.5E-02)); +#467879 = VECTOR('',#467880,1.); +#467880 = DIRECTION('',(1.,0.,0.)); +#467881 = ORIENTED_EDGE('',*,*,#467882,.T.); +#467882 = EDGE_CURVE('',#467875,#467883,#467885,.T.); +#467883 = VERTEX_POINT('',#467884); +#467884 = CARTESIAN_POINT('',(132.891683,-134.986956,-7.5E-02)); +#467885 = LINE('',#467886,#467887); +#467886 = CARTESIAN_POINT('',(132.891683,-134.698866,-7.5E-02)); +#467887 = VECTOR('',#467888,1.); +#467888 = DIRECTION('',(0.,-1.,0.)); +#467889 = ORIENTED_EDGE('',*,*,#467890,.T.); +#467890 = EDGE_CURVE('',#467883,#467859,#467891,.T.); +#467891 = LINE('',#467892,#467893); +#467892 = CARTESIAN_POINT('',(132.891683,-134.986956,-7.5E-02)); +#467893 = VECTOR('',#467894,1.); +#467894 = DIRECTION('',(-1.,0.,0.)); +#467895 = ORIENTED_EDGE('',*,*,#467896,.T.); +#467896 = EDGE_CURVE('',#467859,#467897,#467899,.T.); +#467897 = VERTEX_POINT('',#467898); +#467898 = CARTESIAN_POINT('',(132.603592,-135.275047,-7.5E-02)); +#467899 = LINE('',#467900,#467901); +#467900 = CARTESIAN_POINT('',(132.603592,-134.986956,-7.5E-02)); +#467901 = VECTOR('',#467902,1.); +#467902 = DIRECTION('',(0.,-1.,0.)); +#467903 = ORIENTED_EDGE('',*,*,#467904,.T.); +#467904 = EDGE_CURVE('',#467897,#467905,#467907,.T.); +#467905 = VERTEX_POINT('',#467906); +#467906 = CARTESIAN_POINT('',(132.891683,-135.275047,-7.5E-02)); +#467907 = LINE('',#467908,#467909); +#467908 = CARTESIAN_POINT('',(132.603592,-135.275047,-7.5E-02)); +#467909 = VECTOR('',#467910,1.); +#467910 = DIRECTION('',(1.,0.,0.)); +#467911 = ORIENTED_EDGE('',*,*,#467912,.T.); +#467912 = EDGE_CURVE('',#467905,#467913,#467915,.T.); +#467913 = VERTEX_POINT('',#467914); +#467914 = CARTESIAN_POINT('',(132.891683,-135.563138,-7.5E-02)); +#467915 = LINE('',#467916,#467917); +#467916 = CARTESIAN_POINT('',(132.891683,-135.275047,-7.5E-02)); +#467917 = VECTOR('',#467918,1.); +#467918 = DIRECTION('',(0.,-1.,0.)); +#467919 = ORIENTED_EDGE('',*,*,#467920,.T.); +#467920 = EDGE_CURVE('',#467913,#467921,#467923,.T.); +#467921 = VERTEX_POINT('',#467922); +#467922 = CARTESIAN_POINT('',(134.044046,-135.563138,-7.5E-02)); +#467923 = LINE('',#467924,#467925); +#467924 = CARTESIAN_POINT('',(132.891683,-135.563138,-7.5E-02)); +#467925 = VECTOR('',#467926,1.); +#467926 = DIRECTION('',(1.,0.,0.)); +#467927 = ORIENTED_EDGE('',*,*,#467928,.T.); +#467928 = EDGE_CURVE('',#467921,#467929,#467931,.T.); +#467929 = VERTEX_POINT('',#467930); +#467930 = CARTESIAN_POINT('',(134.044046,-135.275047,-7.5E-02)); +#467931 = LINE('',#467932,#467933); +#467932 = CARTESIAN_POINT('',(134.044046,-135.563138,-7.5E-02)); +#467933 = VECTOR('',#467934,1.); +#467934 = DIRECTION('',(0.,1.,0.)); +#467935 = ORIENTED_EDGE('',*,*,#467936,.T.); +#467936 = EDGE_CURVE('',#467929,#467937,#467939,.T.); +#467937 = VERTEX_POINT('',#467938); +#467938 = CARTESIAN_POINT('',(134.332136,-135.275047,-7.5E-02)); +#467939 = LINE('',#467940,#467941); +#467940 = CARTESIAN_POINT('',(134.044046,-135.275047,-7.5E-02)); +#467941 = VECTOR('',#467942,1.); +#467942 = DIRECTION('',(1.,0.,0.)); +#467943 = ORIENTED_EDGE('',*,*,#467944,.T.); +#467944 = EDGE_CURVE('',#467937,#467945,#467947,.T.); +#467945 = VERTEX_POINT('',#467946); +#467946 = CARTESIAN_POINT('',(134.332136,-135.563138,-7.5E-02)); +#467947 = LINE('',#467948,#467949); +#467948 = CARTESIAN_POINT('',(134.332136,-135.275047,-7.5E-02)); +#467949 = VECTOR('',#467950,1.); +#467950 = DIRECTION('',(0.,-1.,0.)); +#467951 = ORIENTED_EDGE('',*,*,#467952,.T.); +#467952 = EDGE_CURVE('',#467945,#467921,#467953,.T.); +#467953 = LINE('',#467954,#467955); +#467954 = CARTESIAN_POINT('',(134.332136,-135.563138,-7.5E-02)); +#467955 = VECTOR('',#467956,1.); +#467956 = DIRECTION('',(-1.,0.,0.)); +#467957 = ORIENTED_EDGE('',*,*,#467958,.T.); +#467958 = EDGE_CURVE('',#467921,#467959,#467961,.T.); +#467959 = VERTEX_POINT('',#467960); +#467960 = CARTESIAN_POINT('',(134.044046,-135.851229,-7.5E-02)); +#467961 = LINE('',#467962,#467963); +#467962 = CARTESIAN_POINT('',(134.044046,-135.563138,-7.5E-02)); +#467963 = VECTOR('',#467964,1.); +#467964 = DIRECTION('',(0.,-1.,0.)); +#467965 = ORIENTED_EDGE('',*,*,#467966,.T.); +#467966 = EDGE_CURVE('',#467959,#467967,#467969,.T.); +#467967 = VERTEX_POINT('',#467968); +#467968 = CARTESIAN_POINT('',(133.755955,-135.851229,-7.5E-02)); +#467969 = LINE('',#467970,#467971); +#467970 = CARTESIAN_POINT('',(134.044046,-135.851229,-7.5E-02)); +#467971 = VECTOR('',#467972,1.); +#467972 = DIRECTION('',(-1.,0.,0.)); +#467973 = ORIENTED_EDGE('',*,*,#467974,.T.); +#467974 = EDGE_CURVE('',#467967,#467975,#467977,.T.); +#467975 = VERTEX_POINT('',#467976); +#467976 = CARTESIAN_POINT('',(133.755955,-136.139319,-7.5E-02)); +#467977 = LINE('',#467978,#467979); +#467978 = CARTESIAN_POINT('',(133.755955,-135.851229,-7.5E-02)); +#467979 = VECTOR('',#467980,1.); +#467980 = DIRECTION('',(0.,-1.,0.)); +#467981 = ORIENTED_EDGE('',*,*,#467982,.T.); +#467982 = EDGE_CURVE('',#467975,#467983,#467985,.T.); +#467983 = VERTEX_POINT('',#467984); +#467984 = CARTESIAN_POINT('',(133.467864,-136.139319,-7.5E-02)); +#467985 = LINE('',#467986,#467987); +#467986 = CARTESIAN_POINT('',(133.755955,-136.139319,-7.5E-02)); +#467987 = VECTOR('',#467988,1.); +#467988 = DIRECTION('',(-1.,0.,0.)); +#467989 = ORIENTED_EDGE('',*,*,#467990,.T.); +#467990 = EDGE_CURVE('',#467983,#467991,#467993,.T.); +#467991 = VERTEX_POINT('',#467992); +#467992 = CARTESIAN_POINT('',(133.467864,-136.42741,-7.5E-02)); +#467993 = LINE('',#467994,#467995); +#467994 = CARTESIAN_POINT('',(133.467864,-136.139319,-7.5E-02)); +#467995 = VECTOR('',#467996,1.); +#467996 = DIRECTION('',(0.,-1.,0.)); +#467997 = ORIENTED_EDGE('',*,*,#467998,.T.); +#467998 = EDGE_CURVE('',#467991,#467999,#468001,.T.); +#467999 = VERTEX_POINT('',#468000); +#468000 = CARTESIAN_POINT('',(133.755955,-136.42741,-7.5E-02)); +#468001 = LINE('',#468002,#468003); +#468002 = CARTESIAN_POINT('',(133.467864,-136.42741,-7.5E-02)); +#468003 = VECTOR('',#468004,1.); +#468004 = DIRECTION('',(1.,0.,0.)); +#468005 = ORIENTED_EDGE('',*,*,#468006,.T.); +#468006 = EDGE_CURVE('',#467999,#468007,#468009,.T.); +#468007 = VERTEX_POINT('',#468008); +#468008 = CARTESIAN_POINT('',(133.755955,-136.715501,-7.5E-02)); +#468009 = LINE('',#468010,#468011); +#468010 = CARTESIAN_POINT('',(133.755955,-136.42741,-7.5E-02)); +#468011 = VECTOR('',#468012,1.); +#468012 = DIRECTION('',(0.,-1.,0.)); +#468013 = ORIENTED_EDGE('',*,*,#468014,.T.); +#468014 = EDGE_CURVE('',#468007,#468015,#468017,.T.); +#468015 = VERTEX_POINT('',#468016); +#468016 = CARTESIAN_POINT('',(133.467864,-136.715501,-7.5E-02)); +#468017 = LINE('',#468018,#468019); +#468018 = CARTESIAN_POINT('',(133.755955,-136.715501,-7.5E-02)); +#468019 = VECTOR('',#468020,1.); +#468020 = DIRECTION('',(-1.,0.,0.)); +#468021 = ORIENTED_EDGE('',*,*,#468022,.T.); +#468022 = EDGE_CURVE('',#468015,#468023,#468025,.T.); +#468023 = VERTEX_POINT('',#468024); +#468024 = CARTESIAN_POINT('',(133.467864,-137.003592,-7.5E-02)); +#468025 = LINE('',#468026,#468027); +#468026 = CARTESIAN_POINT('',(133.467864,-136.715501,-7.5E-02)); +#468027 = VECTOR('',#468028,1.); +#468028 = DIRECTION('',(0.,-1.,0.)); +#468029 = ORIENTED_EDGE('',*,*,#468030,.T.); +#468030 = EDGE_CURVE('',#468023,#468031,#468033,.T.); +#468031 = VERTEX_POINT('',#468032); +#468032 = CARTESIAN_POINT('',(133.179773,-137.003592,-7.5E-02)); +#468033 = LINE('',#468034,#468035); +#468034 = CARTESIAN_POINT('',(133.467864,-137.003592,-7.5E-02)); +#468035 = VECTOR('',#468036,1.); +#468036 = DIRECTION('',(-1.,0.,0.)); +#468037 = ORIENTED_EDGE('',*,*,#468038,.T.); +#468038 = EDGE_CURVE('',#468031,#468039,#468041,.T.); +#468039 = VERTEX_POINT('',#468040); +#468040 = CARTESIAN_POINT('',(133.179773,-136.139319,-7.5E-02)); +#468041 = LINE('',#468042,#468043); +#468042 = CARTESIAN_POINT('',(133.179773,-137.003592,-7.5E-02)); +#468043 = VECTOR('',#468044,1.); +#468044 = DIRECTION('',(0.,1.,0.)); +#468045 = ORIENTED_EDGE('',*,*,#468046,.T.); +#468046 = EDGE_CURVE('',#468039,#468047,#468049,.T.); +#468047 = VERTEX_POINT('',#468048); +#468048 = CARTESIAN_POINT('',(132.891683,-136.139319,-7.5E-02)); +#468049 = LINE('',#468050,#468051); +#468050 = CARTESIAN_POINT('',(133.179773,-136.139319,-7.5E-02)); +#468051 = VECTOR('',#468052,1.); +#468052 = DIRECTION('',(-1.,0.,0.)); +#468053 = ORIENTED_EDGE('',*,*,#468054,.T.); +#468054 = EDGE_CURVE('',#468047,#468055,#468057,.T.); +#468055 = VERTEX_POINT('',#468056); +#468056 = CARTESIAN_POINT('',(132.891683,-136.42741,-7.5E-02)); +#468057 = LINE('',#468058,#468059); +#468058 = CARTESIAN_POINT('',(132.891683,-136.139319,-7.5E-02)); +#468059 = VECTOR('',#468060,1.); +#468060 = DIRECTION('',(0.,-1.,0.)); +#468061 = ORIENTED_EDGE('',*,*,#468062,.T.); +#468062 = EDGE_CURVE('',#468055,#468063,#468065,.T.); +#468063 = VERTEX_POINT('',#468064); +#468064 = CARTESIAN_POINT('',(132.603592,-136.42741,-7.5E-02)); +#468065 = LINE('',#468066,#468067); +#468066 = CARTESIAN_POINT('',(132.891683,-136.42741,-7.5E-02)); +#468067 = VECTOR('',#468068,1.); +#468068 = DIRECTION('',(-1.,0.,0.)); +#468069 = ORIENTED_EDGE('',*,*,#468070,.T.); +#468070 = EDGE_CURVE('',#468063,#468071,#468073,.T.); +#468071 = VERTEX_POINT('',#468072); +#468072 = CARTESIAN_POINT('',(132.603592,-136.715501,-7.5E-02)); +#468073 = LINE('',#468074,#468075); +#468074 = CARTESIAN_POINT('',(132.603592,-136.42741,-7.5E-02)); +#468075 = VECTOR('',#468076,1.); +#468076 = DIRECTION('',(0.,-1.,0.)); +#468077 = ORIENTED_EDGE('',*,*,#468078,.T.); +#468078 = EDGE_CURVE('',#468071,#468079,#468081,.T.); +#468079 = VERTEX_POINT('',#468080); +#468080 = CARTESIAN_POINT('',(132.315501,-136.715501,-7.5E-02)); +#468081 = LINE('',#468082,#468083); +#468082 = CARTESIAN_POINT('',(132.603592,-136.715501,-7.5E-02)); +#468083 = VECTOR('',#468084,1.); +#468084 = DIRECTION('',(-1.,0.,0.)); +#468085 = ORIENTED_EDGE('',*,*,#468086,.T.); +#468086 = EDGE_CURVE('',#468079,#468087,#468089,.T.); +#468087 = VERTEX_POINT('',#468088); +#468088 = CARTESIAN_POINT('',(132.315501,-136.139319,-7.5E-02)); +#468089 = LINE('',#468090,#468091); +#468090 = CARTESIAN_POINT('',(132.315501,-136.715501,-7.5E-02)); +#468091 = VECTOR('',#468092,1.); +#468092 = DIRECTION('',(0.,1.,0.)); +#468093 = ORIENTED_EDGE('',*,*,#468094,.T.); +#468094 = EDGE_CURVE('',#468087,#468095,#468097,.T.); +#468095 = VERTEX_POINT('',#468096); +#468096 = CARTESIAN_POINT('',(132.02741,-136.139319,-7.5E-02)); +#468097 = LINE('',#468098,#468099); +#468098 = CARTESIAN_POINT('',(132.315501,-136.139319,-7.5E-02)); +#468099 = VECTOR('',#468100,1.); +#468100 = DIRECTION('',(-1.,0.,0.)); +#468101 = ORIENTED_EDGE('',*,*,#468102,.T.); +#468102 = EDGE_CURVE('',#468095,#468103,#468105,.T.); +#468103 = VERTEX_POINT('',#468104); +#468104 = CARTESIAN_POINT('',(132.02741,-135.563138,-7.5E-02)); +#468105 = LINE('',#468106,#468107); +#468106 = CARTESIAN_POINT('',(132.02741,-136.139319,-7.5E-02)); +#468107 = VECTOR('',#468108,1.); +#468108 = DIRECTION('',(0.,1.,0.)); +#468109 = ORIENTED_EDGE('',*,*,#468110,.T.); +#468110 = EDGE_CURVE('',#468103,#468111,#468113,.T.); +#468111 = VERTEX_POINT('',#468112); +#468112 = CARTESIAN_POINT('',(132.315501,-135.563138,-7.5E-02)); +#468113 = LINE('',#468114,#468115); +#468114 = CARTESIAN_POINT('',(132.02741,-135.563138,-7.5E-02)); +#468115 = VECTOR('',#468116,1.); +#468116 = DIRECTION('',(1.,0.,0.)); +#468117 = ORIENTED_EDGE('',*,*,#468118,.T.); +#468118 = EDGE_CURVE('',#468111,#468119,#468121,.T.); +#468119 = VERTEX_POINT('',#468120); +#468120 = CARTESIAN_POINT('',(132.315501,-135.851229,-7.5E-02)); +#468121 = LINE('',#468122,#468123); +#468122 = CARTESIAN_POINT('',(132.315501,-135.563138,-7.5E-02)); +#468123 = VECTOR('',#468124,1.); +#468124 = DIRECTION('',(0.,-1.,0.)); +#468125 = ORIENTED_EDGE('',*,*,#468126,.T.); +#468126 = EDGE_CURVE('',#468119,#468127,#468129,.T.); +#468127 = VERTEX_POINT('',#468128); +#468128 = CARTESIAN_POINT('',(132.603592,-135.851229,-7.5E-02)); +#468129 = LINE('',#468130,#468131); +#468130 = CARTESIAN_POINT('',(132.315501,-135.851229,-7.5E-02)); +#468131 = VECTOR('',#468132,1.); +#468132 = DIRECTION('',(1.,0.,0.)); +#468133 = ORIENTED_EDGE('',*,*,#468134,.T.); +#468134 = EDGE_CURVE('',#468127,#468135,#468137,.T.); +#468135 = VERTEX_POINT('',#468136); +#468136 = CARTESIAN_POINT('',(132.603592,-135.563138,-7.5E-02)); +#468137 = LINE('',#468138,#468139); +#468138 = CARTESIAN_POINT('',(132.603592,-135.851229,-7.5E-02)); +#468139 = VECTOR('',#468140,1.); +#468140 = DIRECTION('',(0.,1.,0.)); +#468141 = ORIENTED_EDGE('',*,*,#468142,.T.); +#468142 = EDGE_CURVE('',#468135,#468111,#468143,.T.); +#468143 = LINE('',#468144,#468145); +#468144 = CARTESIAN_POINT('',(132.603592,-135.563138,-7.5E-02)); +#468145 = VECTOR('',#468146,1.); +#468146 = DIRECTION('',(-1.,0.,0.)); +#468147 = ORIENTED_EDGE('',*,*,#468148,.T.); +#468148 = EDGE_CURVE('',#468111,#468149,#468151,.T.); +#468149 = VERTEX_POINT('',#468150); +#468150 = CARTESIAN_POINT('',(132.315501,-135.275047,-7.5E-02)); +#468151 = LINE('',#468152,#468153); +#468152 = CARTESIAN_POINT('',(132.315501,-135.563138,-7.5E-02)); +#468153 = VECTOR('',#468154,1.); +#468154 = DIRECTION('',(0.,1.,0.)); +#468155 = ORIENTED_EDGE('',*,*,#468156,.T.); +#468156 = EDGE_CURVE('',#468149,#467833,#468157,.T.); +#468157 = LINE('',#468158,#468159); +#468158 = CARTESIAN_POINT('',(132.315501,-135.275047,-7.5E-02)); +#468159 = VECTOR('',#468160,1.); +#468160 = DIRECTION('',(-1.,0.,0.)); +#468161 = FACE_BOUND('',#468162,.T.); +#468162 = EDGE_LOOP('',(#468163,#468173,#468181,#468189)); +#468163 = ORIENTED_EDGE('',*,*,#468164,.T.); +#468164 = EDGE_CURVE('',#468165,#468167,#468169,.T.); +#468165 = VERTEX_POINT('',#468166); +#468166 = CARTESIAN_POINT('',(133.467864,-136.139319,-7.5E-02)); +#468167 = VERTEX_POINT('',#468168); +#468168 = CARTESIAN_POINT('',(133.467864,-135.851229,-7.5E-02)); +#468169 = LINE('',#468170,#468171); +#468170 = CARTESIAN_POINT('',(133.467864,-136.139319,-7.5E-02)); +#468171 = VECTOR('',#468172,1.); +#468172 = DIRECTION('',(0.,1.,0.)); +#468173 = ORIENTED_EDGE('',*,*,#468174,.T.); +#468174 = EDGE_CURVE('',#468167,#468175,#468177,.T.); +#468175 = VERTEX_POINT('',#468176); +#468176 = CARTESIAN_POINT('',(133.179773,-135.851229,-7.5E-02)); +#468177 = LINE('',#468178,#468179); +#468178 = CARTESIAN_POINT('',(133.467864,-135.851229,-7.5E-02)); +#468179 = VECTOR('',#468180,1.); +#468180 = DIRECTION('',(-1.,0.,0.)); +#468181 = ORIENTED_EDGE('',*,*,#468182,.T.); +#468182 = EDGE_CURVE('',#468175,#468183,#468185,.T.); +#468183 = VERTEX_POINT('',#468184); +#468184 = CARTESIAN_POINT('',(133.179773,-136.139319,-7.5E-02)); +#468185 = LINE('',#468186,#468187); +#468186 = CARTESIAN_POINT('',(133.179773,-135.851229,-7.5E-02)); +#468187 = VECTOR('',#468188,1.); +#468188 = DIRECTION('',(0.,-1.,0.)); +#468189 = ORIENTED_EDGE('',*,*,#468190,.T.); +#468190 = EDGE_CURVE('',#468183,#468165,#468191,.T.); +#468191 = LINE('',#468192,#468193); +#468192 = CARTESIAN_POINT('',(133.179773,-136.139319,-7.5E-02)); +#468193 = VECTOR('',#468194,1.); +#468194 = DIRECTION('',(1.,0.,0.)); +#468195 = PLANE('',#468196); +#468196 = AXIS2_PLACEMENT_3D('',#468197,#468198,#468199); +#468197 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468198 = DIRECTION('',(-0.,-0.,-1.)); +#468199 = DIRECTION('',(-1.,0.,0.)); +#468200 = SHELL_BASED_SURFACE_MODEL('',(#468201)); +#468201 = OPEN_SHELL('',(#468202)); +#468202 = ADVANCED_FACE('',(#468203),#468261,.T.); +#468203 = FACE_BOUND('',#468204,.T.); +#468204 = EDGE_LOOP('',(#468205,#468215,#468223,#468231,#468239,#468247, + #468255)); +#468205 = ORIENTED_EDGE('',*,*,#468206,.T.); +#468206 = EDGE_CURVE('',#468207,#468209,#468211,.T.); +#468207 = VERTEX_POINT('',#468208); +#468208 = CARTESIAN_POINT('',(130.586957,-136.42741,-7.5E-02)); +#468209 = VERTEX_POINT('',#468210); +#468210 = CARTESIAN_POINT('',(130.586957,-136.139319,-7.5E-02)); +#468211 = LINE('',#468212,#468213); +#468212 = CARTESIAN_POINT('',(130.586957,-136.42741,-7.5E-02)); +#468213 = VECTOR('',#468214,1.); +#468214 = DIRECTION('',(0.,1.,0.)); +#468215 = ORIENTED_EDGE('',*,*,#468216,.T.); +#468216 = EDGE_CURVE('',#468209,#468217,#468219,.T.); +#468217 = VERTEX_POINT('',#468218); +#468218 = CARTESIAN_POINT('',(131.163138,-136.139319,-7.5E-02)); +#468219 = LINE('',#468220,#468221); +#468220 = CARTESIAN_POINT('',(130.586957,-136.139319,-7.5E-02)); +#468221 = VECTOR('',#468222,1.); +#468222 = DIRECTION('',(1.,0.,0.)); +#468223 = ORIENTED_EDGE('',*,*,#468224,.T.); +#468224 = EDGE_CURVE('',#468217,#468225,#468227,.T.); +#468225 = VERTEX_POINT('',#468226); +#468226 = CARTESIAN_POINT('',(131.163138,-136.42741,-7.5E-02)); +#468227 = LINE('',#468228,#468229); +#468228 = CARTESIAN_POINT('',(131.163138,-136.139319,-7.5E-02)); +#468229 = VECTOR('',#468230,1.); +#468230 = DIRECTION('',(0.,-1.,0.)); +#468231 = ORIENTED_EDGE('',*,*,#468232,.T.); +#468232 = EDGE_CURVE('',#468225,#468233,#468235,.T.); +#468233 = VERTEX_POINT('',#468234); +#468234 = CARTESIAN_POINT('',(131.163138,-136.715501,-7.5E-02)); +#468235 = LINE('',#468236,#468237); +#468236 = CARTESIAN_POINT('',(131.163138,-136.42741,-7.5E-02)); +#468237 = VECTOR('',#468238,1.); +#468238 = DIRECTION('',(0.,-1.,0.)); +#468239 = ORIENTED_EDGE('',*,*,#468240,.T.); +#468240 = EDGE_CURVE('',#468233,#468241,#468243,.T.); +#468241 = VERTEX_POINT('',#468242); +#468242 = CARTESIAN_POINT('',(130.875047,-136.715501,-7.5E-02)); +#468243 = LINE('',#468244,#468245); +#468244 = CARTESIAN_POINT('',(131.163138,-136.715501,-7.5E-02)); +#468245 = VECTOR('',#468246,1.); +#468246 = DIRECTION('',(-1.,0.,0.)); +#468247 = ORIENTED_EDGE('',*,*,#468248,.T.); +#468248 = EDGE_CURVE('',#468241,#468249,#468251,.T.); +#468249 = VERTEX_POINT('',#468250); +#468250 = CARTESIAN_POINT('',(130.875047,-136.42741,-7.5E-02)); +#468251 = LINE('',#468252,#468253); +#468252 = CARTESIAN_POINT('',(130.875047,-136.715501,-7.5E-02)); +#468253 = VECTOR('',#468254,1.); +#468254 = DIRECTION('',(0.,1.,0.)); +#468255 = ORIENTED_EDGE('',*,*,#468256,.T.); +#468256 = EDGE_CURVE('',#468249,#468207,#468257,.T.); +#468257 = LINE('',#468258,#468259); +#468258 = CARTESIAN_POINT('',(130.875047,-136.42741,-7.5E-02)); +#468259 = VECTOR('',#468260,1.); +#468260 = DIRECTION('',(-1.,0.,0.)); +#468261 = PLANE('',#468262); +#468262 = AXIS2_PLACEMENT_3D('',#468263,#468264,#468265); +#468263 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468264 = DIRECTION('',(-0.,-0.,-1.)); +#468265 = DIRECTION('',(-1.,0.,0.)); +#468266 = SHELL_BASED_SURFACE_MODEL('',(#468267)); +#468267 = OPEN_SHELL('',(#468268)); +#468268 = ADVANCED_FACE('',(#468269,#468474),#468541,.T.); +#468269 = FACE_BOUND('',#468270,.T.); +#468270 = EDGE_LOOP('',(#468271,#468281,#468289,#468297,#468305,#468313, + #468321,#468329,#468337,#468345,#468354,#468362,#468370,#468378, + #468387,#468395,#468404,#468412,#468420,#468428,#468436,#468444, + #468452,#468460,#468468)); +#468271 = ORIENTED_EDGE('',*,*,#468272,.T.); +#468272 = EDGE_CURVE('',#468273,#468275,#468277,.T.); +#468273 = VERTEX_POINT('',#468274); +#468274 = CARTESIAN_POINT('',(153.716724,-136.04964,-7.5E-02)); +#468275 = VERTEX_POINT('',#468276); +#468276 = CARTESIAN_POINT('',(153.82305,-135.998984,-7.5E-02)); +#468277 = LINE('',#468278,#468279); +#468278 = CARTESIAN_POINT('',(153.716724,-136.04964,-7.5E-02)); +#468279 = VECTOR('',#468280,1.); +#468280 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#468281 = ORIENTED_EDGE('',*,*,#468282,.T.); +#468282 = EDGE_CURVE('',#468275,#468283,#468285,.T.); +#468283 = VERTEX_POINT('',#468284); +#468284 = CARTESIAN_POINT('',(153.932017,-135.99723,-7.5E-02)); +#468285 = LINE('',#468286,#468287); +#468286 = CARTESIAN_POINT('',(153.82305,-135.998984,-7.5E-02)); +#468287 = VECTOR('',#468288,1.); +#468288 = DIRECTION('',(0.99987047464,1.609453148681E-02,0.)); +#468289 = ORIENTED_EDGE('',*,*,#468290,.T.); +#468290 = EDGE_CURVE('',#468283,#468291,#468293,.T.); +#468291 = VERTEX_POINT('',#468292); +#468292 = CARTESIAN_POINT('',(153.951921,-136.002021,-7.5E-02)); +#468293 = LINE('',#468294,#468295); +#468294 = CARTESIAN_POINT('',(153.932017,-135.99723,-7.5E-02)); +#468295 = VECTOR('',#468296,1.); +#468296 = DIRECTION('',(0.972231458314,-0.234021348312,0.)); +#468297 = ORIENTED_EDGE('',*,*,#468298,.T.); +#468298 = EDGE_CURVE('',#468291,#468299,#468301,.T.); +#468299 = VERTEX_POINT('',#468300); +#468300 = CARTESIAN_POINT('',(154.059751,-136.059411,-7.5E-02)); +#468301 = LINE('',#468302,#468303); +#468302 = CARTESIAN_POINT('',(153.951921,-136.002021,-7.5E-02)); +#468303 = VECTOR('',#468304,1.); +#468304 = DIRECTION('',(0.882758259516,-0.469827473927,0.)); +#468305 = ORIENTED_EDGE('',*,*,#468306,.T.); +#468306 = EDGE_CURVE('',#468299,#468307,#468309,.T.); +#468307 = VERTEX_POINT('',#468308); +#468308 = CARTESIAN_POINT('',(154.118613,-136.170465,-7.5E-02)); +#468309 = LINE('',#468310,#468311); +#468310 = CARTESIAN_POINT('',(154.059751,-136.059411,-7.5E-02)); +#468311 = VECTOR('',#468312,1.); +#468312 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#468313 = ORIENTED_EDGE('',*,*,#468314,.T.); +#468314 = EDGE_CURVE('',#468307,#468315,#468317,.T.); +#468315 = VERTEX_POINT('',#468316); +#468316 = CARTESIAN_POINT('',(154.122419,-136.189599,-7.5E-02)); +#468317 = LINE('',#468318,#468319); +#468318 = CARTESIAN_POINT('',(154.118613,-136.170465,-7.5E-02)); +#468319 = VECTOR('',#468320,1.); +#468320 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#468321 = ORIENTED_EDGE('',*,*,#468322,.T.); +#468322 = EDGE_CURVE('',#468315,#468323,#468325,.T.); +#468323 = VERTEX_POINT('',#468324); +#468324 = CARTESIAN_POINT('',(154.120176,-136.438966,-7.5E-02)); +#468325 = LINE('',#468326,#468327); +#468326 = CARTESIAN_POINT('',(154.122419,-136.189599,-7.5E-02)); +#468327 = VECTOR('',#468328,1.); +#468328 = DIRECTION('',(-8.994410926377E-03,-0.999959549468,0.)); +#468329 = ORIENTED_EDGE('',*,*,#468330,.T.); +#468330 = EDGE_CURVE('',#468323,#468331,#468333,.T.); +#468331 = VERTEX_POINT('',#468332); +#468332 = CARTESIAN_POINT('',(154.099716,-136.484901,-7.5E-02)); +#468333 = LINE('',#468334,#468335); +#468334 = CARTESIAN_POINT('',(154.120176,-136.438966,-7.5E-02)); +#468335 = VECTOR('',#468336,1.); +#468336 = DIRECTION('',(-0.406876386711,-0.91348322696,0.)); +#468337 = ORIENTED_EDGE('',*,*,#468338,.T.); +#468338 = EDGE_CURVE('',#468331,#468339,#468341,.T.); +#468339 = VERTEX_POINT('',#468340); +#468340 = CARTESIAN_POINT('',(154.118613,-136.503798,-7.5E-02)); +#468341 = LINE('',#468342,#468343); +#468342 = CARTESIAN_POINT('',(154.099716,-136.484901,-7.5E-02)); +#468343 = VECTOR('',#468344,1.); +#468344 = DIRECTION('',(0.707106781187,-0.707106781186,0.)); +#468345 = ORIENTED_EDGE('',*,*,#468346,.T.); +#468346 = EDGE_CURVE('',#468339,#468347,#468349,.T.); +#468347 = VERTEX_POINT('',#468348); +#468348 = CARTESIAN_POINT('',(154.072419,-136.572932,-7.5E-02)); +#468349 = CIRCLE('',#468350,5.000000000003E-02); +#468350 = AXIS2_PLACEMENT_3D('',#468351,#468352,#468353); +#468351 = CARTESIAN_POINT('',(154.07241895228,-136.522932,-7.5E-02)); +#468352 = DIRECTION('',(0.,0.,-1.)); +#468353 = DIRECTION('',(0.923880954236,0.38268,0.)); +#468354 = ORIENTED_EDGE('',*,*,#468355,.T.); +#468355 = EDGE_CURVE('',#468347,#468356,#468358,.T.); +#468356 = VERTEX_POINT('',#468357); +#468357 = CARTESIAN_POINT('',(153.537336,-136.570689,-7.5E-02)); +#468358 = LINE('',#468359,#468360); +#468359 = CARTESIAN_POINT('',(154.072419,-136.572932,-7.5E-02)); +#468360 = VECTOR('',#468361,1.); +#468361 = DIRECTION('',(-0.999991214216,4.191836207668E-03,0.)); +#468362 = ORIENTED_EDGE('',*,*,#468363,.T.); +#468363 = EDGE_CURVE('',#468356,#468364,#468366,.T.); +#468364 = VERTEX_POINT('',#468365); +#468365 = CARTESIAN_POINT('',(153.420611,-136.513085,-7.5E-02)); +#468366 = LINE('',#468367,#468368); +#468367 = CARTESIAN_POINT('',(153.537336,-136.570689,-7.5E-02)); +#468368 = VECTOR('',#468369,1.); +#468369 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#468370 = ORIENTED_EDGE('',*,*,#468371,.T.); +#468371 = EDGE_CURVE('',#468364,#468372,#468374,.T.); +#468372 = VERTEX_POINT('',#468373); +#468373 = CARTESIAN_POINT('',(153.408649,-136.497673,-7.5E-02)); +#468374 = LINE('',#468375,#468376); +#468375 = CARTESIAN_POINT('',(153.420611,-136.513085,-7.5E-02)); +#468376 = VECTOR('',#468377,1.); +#468377 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#468378 = ORIENTED_EDGE('',*,*,#468379,.T.); +#468379 = EDGE_CURVE('',#468372,#468380,#468382,.T.); +#468380 = VERTEX_POINT('',#468381); +#468381 = CARTESIAN_POINT('',(153.408649,-136.072001,-7.5E-02)); +#468382 = CIRCLE('',#468383,0.375890473252); +#468383 = AXIS2_PLACEMENT_3D('',#468384,#468385,#468386); +#468384 = CARTESIAN_POINT('',(153.71847876775,-136.284837,-7.5E-02)); +#468385 = DIRECTION('',(0.,0.,-1.)); +#468386 = DIRECTION('',(-0.824255440879,-0.56621812774,-0.)); +#468387 = ORIENTED_EDGE('',*,*,#468388,.T.); +#468388 = EDGE_CURVE('',#468380,#468389,#468391,.T.); +#468389 = VERTEX_POINT('',#468390); +#468390 = CARTESIAN_POINT('',(153.420611,-136.056589,-7.5E-02)); +#468391 = LINE('',#468392,#468393); +#468392 = CARTESIAN_POINT('',(153.408649,-136.072001,-7.5E-02)); +#468393 = VECTOR('',#468394,1.); +#468394 = DIRECTION('',(0.613138319012,0.789975570356,0.)); +#468395 = ORIENTED_EDGE('',*,*,#468396,.T.); +#468396 = EDGE_CURVE('',#468389,#468397,#468399,.T.); +#468397 = VERTEX_POINT('',#468398); +#468398 = CARTESIAN_POINT('',(153.498092,-136.116722,-7.5E-02)); +#468399 = CIRCLE('',#468400,4.999967912488E-02); +#468400 = AXIS2_PLACEMENT_3D('',#468401,#468402,#468403); +#468401 = CARTESIAN_POINT('',(153.4533709736,-136.0943613714,-7.5E-02)); +#468402 = DIRECTION('',(0.,0.,-1.)); +#468403 = DIRECTION('',(-0.655203676926,0.755452276284,0.)); +#468404 = ORIENTED_EDGE('',*,*,#468405,.T.); +#468405 = EDGE_CURVE('',#468397,#468406,#468408,.T.); +#468406 = VERTEX_POINT('',#468407); +#468407 = CARTESIAN_POINT('',(153.455752,-136.201402,-7.5E-02)); +#468408 = LINE('',#468409,#468410); +#468409 = CARTESIAN_POINT('',(153.498092,-136.116722,-7.5E-02)); +#468410 = VECTOR('',#468411,1.); +#468411 = DIRECTION('',(-0.4472135955,-0.894427191,0.)); +#468412 = ORIENTED_EDGE('',*,*,#468413,.T.); +#468413 = EDGE_CURVE('',#468406,#468414,#468416,.T.); +#468414 = VERTEX_POINT('',#468415); +#468415 = CARTESIAN_POINT('',(153.455752,-136.368272,-7.5E-02)); +#468416 = LINE('',#468417,#468418); +#468417 = CARTESIAN_POINT('',(153.455752,-136.201402,-7.5E-02)); +#468418 = VECTOR('',#468419,1.); +#468419 = DIRECTION('',(0.,-1.,0.)); +#468420 = ORIENTED_EDGE('',*,*,#468421,.T.); +#468421 = EDGE_CURVE('',#468414,#468422,#468424,.T.); +#468422 = VERTEX_POINT('',#468423); +#468423 = CARTESIAN_POINT('',(153.490638,-136.438045,-7.5E-02)); +#468424 = LINE('',#468425,#468426); +#468425 = CARTESIAN_POINT('',(153.455752,-136.368272,-7.5E-02)); +#468426 = VECTOR('',#468427,1.); +#468427 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#468428 = ORIENTED_EDGE('',*,*,#468429,.T.); +#468429 = EDGE_CURVE('',#468422,#468430,#468432,.T.); +#468430 = VERTEX_POINT('',#468431); +#468431 = CARTESIAN_POINT('',(153.560413,-136.472932,-7.5E-02)); +#468432 = LINE('',#468433,#468434); +#468433 = CARTESIAN_POINT('',(153.490638,-136.438045,-7.5E-02)); +#468434 = VECTOR('',#468435,1.); +#468435 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#468436 = ORIENTED_EDGE('',*,*,#468437,.T.); +#468437 = EDGE_CURVE('',#468430,#468438,#468440,.T.); +#468438 = VERTEX_POINT('',#468439); +#468439 = CARTESIAN_POINT('',(153.612945,-136.472932,-7.5E-02)); +#468440 = LINE('',#468441,#468442); +#468441 = CARTESIAN_POINT('',(153.560413,-136.472932,-7.5E-02)); +#468442 = VECTOR('',#468443,1.); +#468443 = DIRECTION('',(1.,0.,0.)); +#468444 = ORIENTED_EDGE('',*,*,#468445,.T.); +#468445 = EDGE_CURVE('',#468438,#468446,#468448,.T.); +#468446 = VERTEX_POINT('',#468447); +#468447 = CARTESIAN_POINT('',(153.641466,-136.41589,-7.5E-02)); +#468448 = LINE('',#468449,#468450); +#468449 = CARTESIAN_POINT('',(153.612945,-136.472932,-7.5E-02)); +#468450 = VECTOR('',#468451,1.); +#468451 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#468452 = ORIENTED_EDGE('',*,*,#468453,.T.); +#468453 = EDGE_CURVE('',#468446,#468454,#468456,.T.); +#468454 = VERTEX_POINT('',#468455); +#468455 = CARTESIAN_POINT('',(153.643708,-136.178326,-7.5E-02)); +#468456 = LINE('',#468457,#468458); +#468457 = CARTESIAN_POINT('',(153.641466,-136.41589,-7.5E-02)); +#468458 = VECTOR('',#468459,1.); +#468459 = DIRECTION('',(9.437036605445E-03,0.999955470179,0.)); +#468460 = ORIENTED_EDGE('',*,*,#468461,.T.); +#468461 = EDGE_CURVE('',#468454,#468462,#468464,.T.); +#468462 = VERTEX_POINT('',#468463); +#468463 = CARTESIAN_POINT('',(153.701312,-136.061601,-7.5E-02)); +#468464 = LINE('',#468465,#468466); +#468465 = CARTESIAN_POINT('',(153.643708,-136.178326,-7.5E-02)); +#468466 = VECTOR('',#468467,1.); +#468467 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#468468 = ORIENTED_EDGE('',*,*,#468469,.T.); +#468469 = EDGE_CURVE('',#468462,#468273,#468470,.T.); +#468470 = LINE('',#468471,#468472); +#468471 = CARTESIAN_POINT('',(153.701312,-136.061601,-7.5E-02)); +#468472 = VECTOR('',#468473,1.); +#468473 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#468474 = FACE_BOUND('',#468475,.T.); +#468475 = EDGE_LOOP('',(#468476,#468487,#468495,#468503,#468511,#468519, + #468527,#468535)); +#468476 = ORIENTED_EDGE('',*,*,#468477,.T.); +#468477 = EDGE_CURVE('',#468478,#468480,#468482,.T.); +#468478 = VERTEX_POINT('',#468479); +#468479 = CARTESIAN_POINT('',(153.987532,-136.131628,-7.5E-02)); +#468480 = VERTEX_POINT('',#468481); +#468481 = CARTESIAN_POINT('',(153.776352,-136.131628,-7.5E-02)); +#468482 = CIRCLE('',#468483,0.162841435032); +#468483 = AXIS2_PLACEMENT_3D('',#468484,#468485,#468486); +#468484 = CARTESIAN_POINT('',(153.881942,-136.25559608,-7.5E-02)); +#468485 = DIRECTION('',(0.,0.,1.)); +#468486 = DIRECTION('',(0.648422190453,0.761280935613,-0.)); +#468487 = ORIENTED_EDGE('',*,*,#468488,.T.); +#468488 = EDGE_CURVE('',#468480,#468489,#468491,.T.); +#468489 = VERTEX_POINT('',#468490); +#468490 = CARTESIAN_POINT('',(153.741466,-136.201402,-7.5E-02)); +#468491 = LINE('',#468492,#468493); +#468492 = CARTESIAN_POINT('',(153.776352,-136.131628,-7.5E-02)); +#468493 = VECTOR('',#468494,1.); +#468494 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#468495 = ORIENTED_EDGE('',*,*,#468496,.T.); +#468496 = EDGE_CURVE('',#468489,#468497,#468499,.T.); +#468497 = VERTEX_POINT('',#468498); +#468498 = CARTESIAN_POINT('',(153.739223,-136.438966,-7.5E-02)); +#468499 = LINE('',#468500,#468501); +#468500 = CARTESIAN_POINT('',(153.741466,-136.201402,-7.5E-02)); +#468501 = VECTOR('',#468502,1.); +#468502 = DIRECTION('',(-9.441245434874E-03,-0.999955430449,0.)); +#468503 = ORIENTED_EDGE('',*,*,#468504,.T.); +#468504 = EDGE_CURVE('',#468497,#468505,#468507,.T.); +#468505 = VERTEX_POINT('',#468506); +#468506 = CARTESIAN_POINT('',(153.724748,-136.472932,-7.5E-02)); +#468507 = LINE('',#468508,#468509); +#468508 = CARTESIAN_POINT('',(153.739223,-136.438966,-7.5E-02)); +#468509 = VECTOR('',#468510,1.); +#468510 = DIRECTION('',(-0.392045460213,-0.91994584467,0.)); +#468511 = ORIENTED_EDGE('',*,*,#468512,.T.); +#468512 = EDGE_CURVE('',#468505,#468513,#468515,.T.); +#468513 = VERTEX_POINT('',#468514); +#468514 = CARTESIAN_POINT('',(153.993898,-136.472932,-7.5E-02)); +#468515 = LINE('',#468516,#468517); +#468516 = CARTESIAN_POINT('',(153.724748,-136.472932,-7.5E-02)); +#468517 = VECTOR('',#468518,1.); +#468518 = DIRECTION('',(1.,0.,0.)); +#468519 = ORIENTED_EDGE('',*,*,#468520,.T.); +#468520 = EDGE_CURVE('',#468513,#468521,#468523,.T.); +#468521 = VERTEX_POINT('',#468522); +#468522 = CARTESIAN_POINT('',(154.022419,-136.41589,-7.5E-02)); +#468523 = LINE('',#468524,#468525); +#468524 = CARTESIAN_POINT('',(153.993898,-136.472932,-7.5E-02)); +#468525 = VECTOR('',#468526,1.); +#468526 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#468527 = ORIENTED_EDGE('',*,*,#468528,.T.); +#468528 = EDGE_CURVE('',#468521,#468529,#468531,.T.); +#468529 = VERTEX_POINT('',#468530); +#468530 = CARTESIAN_POINT('',(154.022419,-136.201402,-7.5E-02)); +#468531 = LINE('',#468532,#468533); +#468532 = CARTESIAN_POINT('',(154.022419,-136.41589,-7.5E-02)); +#468533 = VECTOR('',#468534,1.); +#468534 = DIRECTION('',(0.,1.,0.)); +#468535 = ORIENTED_EDGE('',*,*,#468536,.T.); +#468536 = EDGE_CURVE('',#468529,#468478,#468537,.T.); +#468537 = LINE('',#468538,#468539); +#468538 = CARTESIAN_POINT('',(154.022419,-136.201402,-7.5E-02)); +#468539 = VECTOR('',#468540,1.); +#468540 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#468541 = PLANE('',#468542); +#468542 = AXIS2_PLACEMENT_3D('',#468543,#468544,#468545); +#468543 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468544 = DIRECTION('',(-0.,-0.,-1.)); +#468545 = DIRECTION('',(-1.,0.,0.)); +#468546 = SHELL_BASED_SURFACE_MODEL('',(#468547)); +#468547 = OPEN_SHELL('',(#468548)); +#468548 = ADVANCED_FACE('',(#468549),#468591,.T.); +#468549 = FACE_BOUND('',#468550,.T.); +#468550 = EDGE_LOOP('',(#468551,#468561,#468569,#468577,#468585)); +#468551 = ORIENTED_EDGE('',*,*,#468552,.T.); +#468552 = EDGE_CURVE('',#468553,#468555,#468557,.T.); +#468553 = VERTEX_POINT('',#468554); +#468554 = CARTESIAN_POINT('',(128.570322,-136.42741,-7.5E-02)); +#468555 = VERTEX_POINT('',#468556); +#468556 = CARTESIAN_POINT('',(128.570322,-136.139319,-7.5E-02)); +#468557 = LINE('',#468558,#468559); +#468558 = CARTESIAN_POINT('',(128.570322,-136.42741,-7.5E-02)); +#468559 = VECTOR('',#468560,1.); +#468560 = DIRECTION('',(0.,1.,0.)); +#468561 = ORIENTED_EDGE('',*,*,#468562,.T.); +#468562 = EDGE_CURVE('',#468555,#468563,#468565,.T.); +#468563 = VERTEX_POINT('',#468564); +#468564 = CARTESIAN_POINT('',(128.858412,-136.139319,-7.5E-02)); +#468565 = LINE('',#468566,#468567); +#468566 = CARTESIAN_POINT('',(128.570322,-136.139319,-7.5E-02)); +#468567 = VECTOR('',#468568,1.); +#468568 = DIRECTION('',(1.,0.,0.)); +#468569 = ORIENTED_EDGE('',*,*,#468570,.T.); +#468570 = EDGE_CURVE('',#468563,#468571,#468573,.T.); +#468571 = VERTEX_POINT('',#468572); +#468572 = CARTESIAN_POINT('',(128.858412,-136.283365,-7.5E-02)); +#468573 = LINE('',#468574,#468575); +#468574 = CARTESIAN_POINT('',(128.858412,-136.139319,-7.5E-02)); +#468575 = VECTOR('',#468576,1.); +#468576 = DIRECTION('',(0.,-1.,0.)); +#468577 = ORIENTED_EDGE('',*,*,#468578,.T.); +#468578 = EDGE_CURVE('',#468571,#468579,#468581,.T.); +#468579 = VERTEX_POINT('',#468580); +#468580 = CARTESIAN_POINT('',(128.858412,-136.42741,-7.5E-02)); +#468581 = LINE('',#468582,#468583); +#468582 = CARTESIAN_POINT('',(128.858412,-136.283365,-7.5E-02)); +#468583 = VECTOR('',#468584,1.); +#468584 = DIRECTION('',(0.,-1.,0.)); +#468585 = ORIENTED_EDGE('',*,*,#468586,.T.); +#468586 = EDGE_CURVE('',#468579,#468553,#468587,.T.); +#468587 = LINE('',#468588,#468589); +#468588 = CARTESIAN_POINT('',(128.858412,-136.42741,-7.5E-02)); +#468589 = VECTOR('',#468590,1.); +#468590 = DIRECTION('',(-1.,0.,0.)); +#468591 = PLANE('',#468592); +#468592 = AXIS2_PLACEMENT_3D('',#468593,#468594,#468595); +#468593 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468594 = DIRECTION('',(-0.,-0.,-1.)); +#468595 = DIRECTION('',(-1.,0.,0.)); +#468596 = SHELL_BASED_SURFACE_MODEL('',(#468597)); +#468597 = OPEN_SHELL('',(#468598)); +#468598 = ADVANCED_FACE('',(#468599),#468641,.T.); +#468599 = FACE_BOUND('',#468600,.T.); +#468600 = EDGE_LOOP('',(#468601,#468611,#468619,#468627,#468635)); +#468601 = ORIENTED_EDGE('',*,*,#468602,.T.); +#468602 = EDGE_CURVE('',#468603,#468605,#468607,.T.); +#468603 = VERTEX_POINT('',#468604); +#468604 = CARTESIAN_POINT('',(134.332136,-136.139319,-7.5E-02)); +#468605 = VERTEX_POINT('',#468606); +#468606 = CARTESIAN_POINT('',(134.476182,-136.139319,-7.5E-02)); +#468607 = LINE('',#468608,#468609); +#468608 = CARTESIAN_POINT('',(134.332136,-136.139319,-7.5E-02)); +#468609 = VECTOR('',#468610,1.); +#468610 = DIRECTION('',(1.,0.,0.)); +#468611 = ORIENTED_EDGE('',*,*,#468612,.T.); +#468612 = EDGE_CURVE('',#468605,#468613,#468615,.T.); +#468613 = VERTEX_POINT('',#468614); +#468614 = CARTESIAN_POINT('',(134.620227,-136.139319,-7.5E-02)); +#468615 = LINE('',#468616,#468617); +#468616 = CARTESIAN_POINT('',(134.476182,-136.139319,-7.5E-02)); +#468617 = VECTOR('',#468618,1.); +#468618 = DIRECTION('',(1.,0.,0.)); +#468619 = ORIENTED_EDGE('',*,*,#468620,.T.); +#468620 = EDGE_CURVE('',#468613,#468621,#468623,.T.); +#468621 = VERTEX_POINT('',#468622); +#468622 = CARTESIAN_POINT('',(134.620227,-136.42741,-7.5E-02)); +#468623 = LINE('',#468624,#468625); +#468624 = CARTESIAN_POINT('',(134.620227,-136.139319,-7.5E-02)); +#468625 = VECTOR('',#468626,1.); +#468626 = DIRECTION('',(0.,-1.,0.)); +#468627 = ORIENTED_EDGE('',*,*,#468628,.T.); +#468628 = EDGE_CURVE('',#468621,#468629,#468631,.T.); +#468629 = VERTEX_POINT('',#468630); +#468630 = CARTESIAN_POINT('',(134.332136,-136.42741,-7.5E-02)); +#468631 = LINE('',#468632,#468633); +#468632 = CARTESIAN_POINT('',(134.620227,-136.42741,-7.5E-02)); +#468633 = VECTOR('',#468634,1.); +#468634 = DIRECTION('',(-1.,0.,0.)); +#468635 = ORIENTED_EDGE('',*,*,#468636,.T.); +#468636 = EDGE_CURVE('',#468629,#468603,#468637,.T.); +#468637 = LINE('',#468638,#468639); +#468638 = CARTESIAN_POINT('',(134.332136,-136.42741,-7.5E-02)); +#468639 = VECTOR('',#468640,1.); +#468640 = DIRECTION('',(0.,1.,0.)); +#468641 = PLANE('',#468642); +#468642 = AXIS2_PLACEMENT_3D('',#468643,#468644,#468645); +#468643 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468644 = DIRECTION('',(-0.,-0.,-1.)); +#468645 = DIRECTION('',(-1.,0.,0.)); +#468646 = SHELL_BASED_SURFACE_MODEL('',(#468647)); +#468647 = OPEN_SHELL('',(#468648)); +#468648 = ADVANCED_FACE('',(#468649),#468691,.T.); +#468649 = FACE_BOUND('',#468650,.T.); +#468650 = EDGE_LOOP('',(#468651,#468661,#468669,#468677,#468685)); +#468651 = ORIENTED_EDGE('',*,*,#468652,.T.); +#468652 = EDGE_CURVE('',#468653,#468655,#468657,.T.); +#468653 = VERTEX_POINT('',#468654); +#468654 = CARTESIAN_POINT('',(136.924953,-136.42741,-7.5E-02)); +#468655 = VERTEX_POINT('',#468656); +#468656 = CARTESIAN_POINT('',(136.924953,-136.139319,-7.5E-02)); +#468657 = LINE('',#468658,#468659); +#468658 = CARTESIAN_POINT('',(136.924953,-136.42741,-7.5E-02)); +#468659 = VECTOR('',#468660,1.); +#468660 = DIRECTION('',(0.,1.,0.)); +#468661 = ORIENTED_EDGE('',*,*,#468662,.T.); +#468662 = EDGE_CURVE('',#468655,#468663,#468665,.T.); +#468663 = VERTEX_POINT('',#468664); +#468664 = CARTESIAN_POINT('',(137.213044,-136.139319,-7.5E-02)); +#468665 = LINE('',#468666,#468667); +#468666 = CARTESIAN_POINT('',(136.924953,-136.139319,-7.5E-02)); +#468667 = VECTOR('',#468668,1.); +#468668 = DIRECTION('',(1.,0.,0.)); +#468669 = ORIENTED_EDGE('',*,*,#468670,.T.); +#468670 = EDGE_CURVE('',#468663,#468671,#468673,.T.); +#468671 = VERTEX_POINT('',#468672); +#468672 = CARTESIAN_POINT('',(137.213044,-136.283365,-7.5E-02)); +#468673 = LINE('',#468674,#468675); +#468674 = CARTESIAN_POINT('',(137.213044,-136.139319,-7.5E-02)); +#468675 = VECTOR('',#468676,1.); +#468676 = DIRECTION('',(0.,-1.,0.)); +#468677 = ORIENTED_EDGE('',*,*,#468678,.T.); +#468678 = EDGE_CURVE('',#468671,#468679,#468681,.T.); +#468679 = VERTEX_POINT('',#468680); +#468680 = CARTESIAN_POINT('',(137.213044,-136.42741,-7.5E-02)); +#468681 = LINE('',#468682,#468683); +#468682 = CARTESIAN_POINT('',(137.213044,-136.283365,-7.5E-02)); +#468683 = VECTOR('',#468684,1.); +#468684 = DIRECTION('',(0.,-1.,0.)); +#468685 = ORIENTED_EDGE('',*,*,#468686,.T.); +#468686 = EDGE_CURVE('',#468679,#468653,#468687,.T.); +#468687 = LINE('',#468688,#468689); +#468688 = CARTESIAN_POINT('',(137.213044,-136.42741,-7.5E-02)); +#468689 = VECTOR('',#468690,1.); +#468690 = DIRECTION('',(-1.,0.,0.)); +#468691 = PLANE('',#468692); +#468692 = AXIS2_PLACEMENT_3D('',#468693,#468694,#468695); +#468693 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468694 = DIRECTION('',(-0.,-0.,-1.)); +#468695 = DIRECTION('',(-1.,0.,0.)); +#468696 = SHELL_BASED_SURFACE_MODEL('',(#468697)); +#468697 = OPEN_SHELL('',(#468698)); +#468698 = ADVANCED_FACE('',(#468699),#468899,.T.); +#468699 = FACE_BOUND('',#468700,.T.); +#468700 = EDGE_LOOP('',(#468701,#468711,#468719,#468727,#468735,#468743, + #468751,#468759,#468765,#468773,#468781,#468789,#468797,#468805, + #468813,#468821,#468829,#468837,#468845,#468853,#468861,#468869, + #468877,#468885,#468893)); +#468701 = ORIENTED_EDGE('',*,*,#468702,.T.); +#468702 = EDGE_CURVE('',#468703,#468705,#468707,.T.); +#468703 = VERTEX_POINT('',#468704); +#468704 = CARTESIAN_POINT('',(137.213044,-135.563138,-7.5E-02)); +#468705 = VERTEX_POINT('',#468706); +#468706 = CARTESIAN_POINT('',(137.213044,-135.275047,-7.5E-02)); +#468707 = LINE('',#468708,#468709); +#468708 = CARTESIAN_POINT('',(137.213044,-135.563138,-7.5E-02)); +#468709 = VECTOR('',#468710,1.); +#468710 = DIRECTION('',(0.,1.,0.)); +#468711 = ORIENTED_EDGE('',*,*,#468712,.T.); +#468712 = EDGE_CURVE('',#468705,#468713,#468715,.T.); +#468713 = VERTEX_POINT('',#468714); +#468714 = CARTESIAN_POINT('',(138.077316,-135.275047,-7.5E-02)); +#468715 = LINE('',#468716,#468717); +#468716 = CARTESIAN_POINT('',(137.213044,-135.275047,-7.5E-02)); +#468717 = VECTOR('',#468718,1.); +#468718 = DIRECTION('',(1.,0.,0.)); +#468719 = ORIENTED_EDGE('',*,*,#468720,.T.); +#468720 = EDGE_CURVE('',#468713,#468721,#468723,.T.); +#468721 = VERTEX_POINT('',#468722); +#468722 = CARTESIAN_POINT('',(138.077316,-135.419092,-7.5E-02)); +#468723 = LINE('',#468724,#468725); +#468724 = CARTESIAN_POINT('',(138.077316,-135.275047,-7.5E-02)); +#468725 = VECTOR('',#468726,1.); +#468726 = DIRECTION('',(0.,-1.,0.)); +#468727 = ORIENTED_EDGE('',*,*,#468728,.T.); +#468728 = EDGE_CURVE('',#468721,#468729,#468731,.T.); +#468729 = VERTEX_POINT('',#468730); +#468730 = CARTESIAN_POINT('',(138.077316,-135.563138,-7.5E-02)); +#468731 = LINE('',#468732,#468733); +#468732 = CARTESIAN_POINT('',(138.077316,-135.419092,-7.5E-02)); +#468733 = VECTOR('',#468734,1.); +#468734 = DIRECTION('',(0.,-1.,0.)); +#468735 = ORIENTED_EDGE('',*,*,#468736,.T.); +#468736 = EDGE_CURVE('',#468729,#468737,#468739,.T.); +#468737 = VERTEX_POINT('',#468738); +#468738 = CARTESIAN_POINT('',(137.789225,-135.563138,-7.5E-02)); +#468739 = LINE('',#468740,#468741); +#468740 = CARTESIAN_POINT('',(138.077316,-135.563138,-7.5E-02)); +#468741 = VECTOR('',#468742,1.); +#468742 = DIRECTION('',(-1.,0.,0.)); +#468743 = ORIENTED_EDGE('',*,*,#468744,.T.); +#468744 = EDGE_CURVE('',#468737,#468745,#468747,.T.); +#468745 = VERTEX_POINT('',#468746); +#468746 = CARTESIAN_POINT('',(137.789225,-135.851229,-7.5E-02)); +#468747 = LINE('',#468748,#468749); +#468748 = CARTESIAN_POINT('',(137.789225,-135.563138,-7.5E-02)); +#468749 = VECTOR('',#468750,1.); +#468750 = DIRECTION('',(0.,-1.,0.)); +#468751 = ORIENTED_EDGE('',*,*,#468752,.T.); +#468752 = EDGE_CURVE('',#468745,#468753,#468755,.T.); +#468753 = VERTEX_POINT('',#468754); +#468754 = CARTESIAN_POINT('',(138.077316,-135.851229,-7.5E-02)); +#468755 = LINE('',#468756,#468757); +#468756 = CARTESIAN_POINT('',(137.789225,-135.851229,-7.5E-02)); +#468757 = VECTOR('',#468758,1.); +#468758 = DIRECTION('',(1.,0.,0.)); +#468759 = ORIENTED_EDGE('',*,*,#468760,.T.); +#468760 = EDGE_CURVE('',#468753,#468729,#468761,.T.); +#468761 = LINE('',#468762,#468763); +#468762 = CARTESIAN_POINT('',(138.077316,-135.851229,-7.5E-02)); +#468763 = VECTOR('',#468764,1.); +#468764 = DIRECTION('',(0.,1.,0.)); +#468765 = ORIENTED_EDGE('',*,*,#468766,.T.); +#468766 = EDGE_CURVE('',#468729,#468767,#468769,.T.); +#468767 = VERTEX_POINT('',#468768); +#468768 = CARTESIAN_POINT('',(138.653497,-135.563138,-7.5E-02)); +#468769 = LINE('',#468770,#468771); +#468770 = CARTESIAN_POINT('',(138.077316,-135.563138,-7.5E-02)); +#468771 = VECTOR('',#468772,1.); +#468772 = DIRECTION('',(1.,0.,0.)); +#468773 = ORIENTED_EDGE('',*,*,#468774,.T.); +#468774 = EDGE_CURVE('',#468767,#468775,#468777,.T.); +#468775 = VERTEX_POINT('',#468776); +#468776 = CARTESIAN_POINT('',(138.653497,-135.851229,-7.5E-02)); +#468777 = LINE('',#468778,#468779); +#468778 = CARTESIAN_POINT('',(138.653497,-135.563138,-7.5E-02)); +#468779 = VECTOR('',#468780,1.); +#468780 = DIRECTION('',(0.,-1.,0.)); +#468781 = ORIENTED_EDGE('',*,*,#468782,.T.); +#468782 = EDGE_CURVE('',#468775,#468783,#468785,.T.); +#468783 = VERTEX_POINT('',#468784); +#468784 = CARTESIAN_POINT('',(138.941588,-135.851229,-7.5E-02)); +#468785 = LINE('',#468786,#468787); +#468786 = CARTESIAN_POINT('',(138.653497,-135.851229,-7.5E-02)); +#468787 = VECTOR('',#468788,1.); +#468788 = DIRECTION('',(1.,0.,0.)); +#468789 = ORIENTED_EDGE('',*,*,#468790,.T.); +#468790 = EDGE_CURVE('',#468783,#468791,#468793,.T.); +#468791 = VERTEX_POINT('',#468792); +#468792 = CARTESIAN_POINT('',(138.941588,-136.139319,-7.5E-02)); +#468793 = LINE('',#468794,#468795); +#468794 = CARTESIAN_POINT('',(138.941588,-135.851229,-7.5E-02)); +#468795 = VECTOR('',#468796,1.); +#468796 = DIRECTION('',(0.,-1.,0.)); +#468797 = ORIENTED_EDGE('',*,*,#468798,.T.); +#468798 = EDGE_CURVE('',#468791,#468799,#468801,.T.); +#468799 = VERTEX_POINT('',#468800); +#468800 = CARTESIAN_POINT('',(138.365407,-136.139319,-7.5E-02)); +#468801 = LINE('',#468802,#468803); +#468802 = CARTESIAN_POINT('',(138.941588,-136.139319,-7.5E-02)); +#468803 = VECTOR('',#468804,1.); +#468804 = DIRECTION('',(-1.,0.,0.)); +#468805 = ORIENTED_EDGE('',*,*,#468806,.T.); +#468806 = EDGE_CURVE('',#468799,#468807,#468809,.T.); +#468807 = VERTEX_POINT('',#468808); +#468808 = CARTESIAN_POINT('',(138.365407,-136.42741,-7.5E-02)); +#468809 = LINE('',#468810,#468811); +#468810 = CARTESIAN_POINT('',(138.365407,-136.139319,-7.5E-02)); +#468811 = VECTOR('',#468812,1.); +#468812 = DIRECTION('',(0.,-1.,0.)); +#468813 = ORIENTED_EDGE('',*,*,#468814,.T.); +#468814 = EDGE_CURVE('',#468807,#468815,#468817,.T.); +#468815 = VERTEX_POINT('',#468816); +#468816 = CARTESIAN_POINT('',(138.077316,-136.42741,-7.5E-02)); +#468817 = LINE('',#468818,#468819); +#468818 = CARTESIAN_POINT('',(138.365407,-136.42741,-7.5E-02)); +#468819 = VECTOR('',#468820,1.); +#468820 = DIRECTION('',(-1.,0.,0.)); +#468821 = ORIENTED_EDGE('',*,*,#468822,.T.); +#468822 = EDGE_CURVE('',#468815,#468823,#468825,.T.); +#468823 = VERTEX_POINT('',#468824); +#468824 = CARTESIAN_POINT('',(138.077316,-136.139319,-7.5E-02)); +#468825 = LINE('',#468826,#468827); +#468826 = CARTESIAN_POINT('',(138.077316,-136.42741,-7.5E-02)); +#468827 = VECTOR('',#468828,1.); +#468828 = DIRECTION('',(0.,1.,0.)); +#468829 = ORIENTED_EDGE('',*,*,#468830,.T.); +#468830 = EDGE_CURVE('',#468823,#468831,#468833,.T.); +#468831 = VERTEX_POINT('',#468832); +#468832 = CARTESIAN_POINT('',(137.789225,-136.139319,-7.5E-02)); +#468833 = LINE('',#468834,#468835); +#468834 = CARTESIAN_POINT('',(138.077316,-136.139319,-7.5E-02)); +#468835 = VECTOR('',#468836,1.); +#468836 = DIRECTION('',(-1.,0.,0.)); +#468837 = ORIENTED_EDGE('',*,*,#468838,.T.); +#468838 = EDGE_CURVE('',#468831,#468839,#468841,.T.); +#468839 = VERTEX_POINT('',#468840); +#468840 = CARTESIAN_POINT('',(137.789225,-136.42741,-7.5E-02)); +#468841 = LINE('',#468842,#468843); +#468842 = CARTESIAN_POINT('',(137.789225,-136.139319,-7.5E-02)); +#468843 = VECTOR('',#468844,1.); +#468844 = DIRECTION('',(0.,-1.,0.)); +#468845 = ORIENTED_EDGE('',*,*,#468846,.T.); +#468846 = EDGE_CURVE('',#468839,#468847,#468849,.T.); +#468847 = VERTEX_POINT('',#468848); +#468848 = CARTESIAN_POINT('',(137.501134,-136.42741,-7.5E-02)); +#468849 = LINE('',#468850,#468851); +#468850 = CARTESIAN_POINT('',(137.789225,-136.42741,-7.5E-02)); +#468851 = VECTOR('',#468852,1.); +#468852 = DIRECTION('',(-1.,0.,0.)); +#468853 = ORIENTED_EDGE('',*,*,#468854,.T.); +#468854 = EDGE_CURVE('',#468847,#468855,#468857,.T.); +#468855 = VERTEX_POINT('',#468856); +#468856 = CARTESIAN_POINT('',(137.501134,-136.139319,-7.5E-02)); +#468857 = LINE('',#468858,#468859); +#468858 = CARTESIAN_POINT('',(137.501134,-136.42741,-7.5E-02)); +#468859 = VECTOR('',#468860,1.); +#468860 = DIRECTION('',(0.,1.,0.)); +#468861 = ORIENTED_EDGE('',*,*,#468862,.T.); +#468862 = EDGE_CURVE('',#468855,#468863,#468865,.T.); +#468863 = VERTEX_POINT('',#468864); +#468864 = CARTESIAN_POINT('',(137.213044,-136.139319,-7.5E-02)); +#468865 = LINE('',#468866,#468867); +#468866 = CARTESIAN_POINT('',(137.501134,-136.139319,-7.5E-02)); +#468867 = VECTOR('',#468868,1.); +#468868 = DIRECTION('',(-1.,0.,0.)); +#468869 = ORIENTED_EDGE('',*,*,#468870,.T.); +#468870 = EDGE_CURVE('',#468863,#468871,#468873,.T.); +#468871 = VERTEX_POINT('',#468872); +#468872 = CARTESIAN_POINT('',(137.213044,-135.851229,-7.5E-02)); +#468873 = LINE('',#468874,#468875); +#468874 = CARTESIAN_POINT('',(137.213044,-136.139319,-7.5E-02)); +#468875 = VECTOR('',#468876,1.); +#468876 = DIRECTION('',(0.,1.,0.)); +#468877 = ORIENTED_EDGE('',*,*,#468878,.T.); +#468878 = EDGE_CURVE('',#468871,#468879,#468881,.T.); +#468879 = VERTEX_POINT('',#468880); +#468880 = CARTESIAN_POINT('',(137.501134,-135.851229,-7.5E-02)); +#468881 = LINE('',#468882,#468883); +#468882 = CARTESIAN_POINT('',(137.213044,-135.851229,-7.5E-02)); +#468883 = VECTOR('',#468884,1.); +#468884 = DIRECTION('',(1.,0.,0.)); +#468885 = ORIENTED_EDGE('',*,*,#468886,.T.); +#468886 = EDGE_CURVE('',#468879,#468887,#468889,.T.); +#468887 = VERTEX_POINT('',#468888); +#468888 = CARTESIAN_POINT('',(137.501134,-135.563138,-7.5E-02)); +#468889 = LINE('',#468890,#468891); +#468890 = CARTESIAN_POINT('',(137.501134,-135.851229,-7.5E-02)); +#468891 = VECTOR('',#468892,1.); +#468892 = DIRECTION('',(0.,1.,0.)); +#468893 = ORIENTED_EDGE('',*,*,#468894,.T.); +#468894 = EDGE_CURVE('',#468887,#468703,#468895,.T.); +#468895 = LINE('',#468896,#468897); +#468896 = CARTESIAN_POINT('',(137.501134,-135.563138,-7.5E-02)); +#468897 = VECTOR('',#468898,1.); +#468898 = DIRECTION('',(-1.,0.,0.)); +#468899 = PLANE('',#468900); +#468900 = AXIS2_PLACEMENT_3D('',#468901,#468902,#468903); +#468901 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468902 = DIRECTION('',(-0.,-0.,-1.)); +#468903 = DIRECTION('',(-1.,0.,0.)); +#468904 = SHELL_BASED_SURFACE_MODEL('',(#468905)); +#468905 = OPEN_SHELL('',(#468906)); +#468906 = ADVANCED_FACE('',(#468907),#468949,.T.); +#468907 = FACE_BOUND('',#468908,.T.); +#468908 = EDGE_LOOP('',(#468909,#468919,#468927,#468935,#468943)); +#468909 = ORIENTED_EDGE('',*,*,#468910,.T.); +#468910 = EDGE_CURVE('',#468911,#468913,#468915,.T.); +#468911 = VERTEX_POINT('',#468912); +#468912 = CARTESIAN_POINT('',(138.941588,-136.139319,-7.5E-02)); +#468913 = VERTEX_POINT('',#468914); +#468914 = CARTESIAN_POINT('',(139.085633,-136.139319,-7.5E-02)); +#468915 = LINE('',#468916,#468917); +#468916 = CARTESIAN_POINT('',(138.941588,-136.139319,-7.5E-02)); +#468917 = VECTOR('',#468918,1.); +#468918 = DIRECTION('',(1.,0.,0.)); +#468919 = ORIENTED_EDGE('',*,*,#468920,.T.); +#468920 = EDGE_CURVE('',#468913,#468921,#468923,.T.); +#468921 = VERTEX_POINT('',#468922); +#468922 = CARTESIAN_POINT('',(139.229679,-136.139319,-7.5E-02)); +#468923 = LINE('',#468924,#468925); +#468924 = CARTESIAN_POINT('',(139.085633,-136.139319,-7.5E-02)); +#468925 = VECTOR('',#468926,1.); +#468926 = DIRECTION('',(1.,0.,0.)); +#468927 = ORIENTED_EDGE('',*,*,#468928,.T.); +#468928 = EDGE_CURVE('',#468921,#468929,#468931,.T.); +#468929 = VERTEX_POINT('',#468930); +#468930 = CARTESIAN_POINT('',(139.229679,-136.42741,-7.5E-02)); +#468931 = LINE('',#468932,#468933); +#468932 = CARTESIAN_POINT('',(139.229679,-136.139319,-7.5E-02)); +#468933 = VECTOR('',#468934,1.); +#468934 = DIRECTION('',(0.,-1.,0.)); +#468935 = ORIENTED_EDGE('',*,*,#468936,.T.); +#468936 = EDGE_CURVE('',#468929,#468937,#468939,.T.); +#468937 = VERTEX_POINT('',#468938); +#468938 = CARTESIAN_POINT('',(138.941588,-136.42741,-7.5E-02)); +#468939 = LINE('',#468940,#468941); +#468940 = CARTESIAN_POINT('',(139.229679,-136.42741,-7.5E-02)); +#468941 = VECTOR('',#468942,1.); +#468942 = DIRECTION('',(-1.,0.,0.)); +#468943 = ORIENTED_EDGE('',*,*,#468944,.T.); +#468944 = EDGE_CURVE('',#468937,#468911,#468945,.T.); +#468945 = LINE('',#468946,#468947); +#468946 = CARTESIAN_POINT('',(138.941588,-136.42741,-7.5E-02)); +#468947 = VECTOR('',#468948,1.); +#468948 = DIRECTION('',(0.,1.,0.)); +#468949 = PLANE('',#468950); +#468950 = AXIS2_PLACEMENT_3D('',#468951,#468952,#468953); +#468951 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#468952 = DIRECTION('',(-0.,-0.,-1.)); +#468953 = DIRECTION('',(-1.,0.,0.)); +#468954 = SHELL_BASED_SURFACE_MODEL('',(#468955)); +#468955 = OPEN_SHELL('',(#468956)); +#468956 = ADVANCED_FACE('',(#468957),#469095,.T.); +#468957 = FACE_BOUND('',#468958,.T.); +#468958 = EDGE_LOOP('',(#468959,#468969,#468977,#468985,#468993,#469001, + #469009,#469017,#469025,#469033,#469041,#469049,#469057,#469065, + #469073,#469081,#469089)); +#468959 = ORIENTED_EDGE('',*,*,#468960,.T.); +#468960 = EDGE_CURVE('',#468961,#468963,#468965,.T.); +#468961 = VERTEX_POINT('',#468962); +#468962 = CARTESIAN_POINT('',(128.858412,-135.563138,-7.5E-02)); +#468963 = VERTEX_POINT('',#468964); +#468964 = CARTESIAN_POINT('',(128.858412,-135.275047,-7.5E-02)); +#468965 = LINE('',#468966,#468967); +#468966 = CARTESIAN_POINT('',(128.858412,-135.563138,-7.5E-02)); +#468967 = VECTOR('',#468968,1.); +#468968 = DIRECTION('',(0.,1.,0.)); +#468969 = ORIENTED_EDGE('',*,*,#468970,.T.); +#468970 = EDGE_CURVE('',#468963,#468971,#468973,.T.); +#468971 = VERTEX_POINT('',#468972); +#468972 = CARTESIAN_POINT('',(130.875047,-135.275047,-7.5E-02)); +#468973 = LINE('',#468974,#468975); +#468974 = CARTESIAN_POINT('',(128.858412,-135.275047,-7.5E-02)); +#468975 = VECTOR('',#468976,1.); +#468976 = DIRECTION('',(1.,0.,0.)); +#468977 = ORIENTED_EDGE('',*,*,#468978,.T.); +#468978 = EDGE_CURVE('',#468971,#468979,#468981,.T.); +#468979 = VERTEX_POINT('',#468980); +#468980 = CARTESIAN_POINT('',(130.875047,-135.563138,-7.5E-02)); +#468981 = LINE('',#468982,#468983); +#468982 = CARTESIAN_POINT('',(130.875047,-135.275047,-7.5E-02)); +#468983 = VECTOR('',#468984,1.); +#468984 = DIRECTION('',(0.,-1.,0.)); +#468985 = ORIENTED_EDGE('',*,*,#468986,.T.); +#468986 = EDGE_CURVE('',#468979,#468987,#468989,.T.); +#468987 = VERTEX_POINT('',#468988); +#468988 = CARTESIAN_POINT('',(130.875047,-135.851229,-7.5E-02)); +#468989 = LINE('',#468990,#468991); +#468990 = CARTESIAN_POINT('',(130.875047,-135.563138,-7.5E-02)); +#468991 = VECTOR('',#468992,1.); +#468992 = DIRECTION('',(0.,-1.,0.)); +#468993 = ORIENTED_EDGE('',*,*,#468994,.T.); +#468994 = EDGE_CURVE('',#468987,#468995,#468997,.T.); +#468995 = VERTEX_POINT('',#468996); +#468996 = CARTESIAN_POINT('',(130.586957,-135.851229,-7.5E-02)); +#468997 = LINE('',#468998,#468999); +#468998 = CARTESIAN_POINT('',(130.875047,-135.851229,-7.5E-02)); +#468999 = VECTOR('',#469000,1.); +#469000 = DIRECTION('',(-1.,0.,0.)); +#469001 = ORIENTED_EDGE('',*,*,#469002,.T.); +#469002 = EDGE_CURVE('',#468995,#469003,#469005,.T.); +#469003 = VERTEX_POINT('',#469004); +#469004 = CARTESIAN_POINT('',(130.586957,-135.563138,-7.5E-02)); +#469005 = LINE('',#469006,#469007); +#469006 = CARTESIAN_POINT('',(130.586957,-135.851229,-7.5E-02)); +#469007 = VECTOR('',#469008,1.); +#469008 = DIRECTION('',(0.,1.,0.)); +#469009 = ORIENTED_EDGE('',*,*,#469010,.T.); +#469010 = EDGE_CURVE('',#469003,#469011,#469013,.T.); +#469011 = VERTEX_POINT('',#469012); +#469012 = CARTESIAN_POINT('',(129.722684,-135.563138,-7.5E-02)); +#469013 = LINE('',#469014,#469015); +#469014 = CARTESIAN_POINT('',(130.586957,-135.563138,-7.5E-02)); +#469015 = VECTOR('',#469016,1.); +#469016 = DIRECTION('',(-1.,0.,0.)); +#469017 = ORIENTED_EDGE('',*,*,#469018,.T.); +#469018 = EDGE_CURVE('',#469011,#469019,#469021,.T.); +#469019 = VERTEX_POINT('',#469020); +#469020 = CARTESIAN_POINT('',(129.722684,-136.139319,-7.5E-02)); +#469021 = LINE('',#469022,#469023); +#469022 = CARTESIAN_POINT('',(129.722684,-135.563138,-7.5E-02)); +#469023 = VECTOR('',#469024,1.); +#469024 = DIRECTION('',(0.,-1.,0.)); +#469025 = ORIENTED_EDGE('',*,*,#469026,.T.); +#469026 = EDGE_CURVE('',#469019,#469027,#469029,.T.); +#469027 = VERTEX_POINT('',#469028); +#469028 = CARTESIAN_POINT('',(129.434594,-136.139319,-7.5E-02)); +#469029 = LINE('',#469030,#469031); +#469030 = CARTESIAN_POINT('',(129.722684,-136.139319,-7.5E-02)); +#469031 = VECTOR('',#469032,1.); +#469032 = DIRECTION('',(-1.,0.,0.)); +#469033 = ORIENTED_EDGE('',*,*,#469034,.T.); +#469034 = EDGE_CURVE('',#469027,#469035,#469037,.T.); +#469035 = VERTEX_POINT('',#469036); +#469036 = CARTESIAN_POINT('',(129.434594,-135.563138,-7.5E-02)); +#469037 = LINE('',#469038,#469039); +#469038 = CARTESIAN_POINT('',(129.434594,-136.139319,-7.5E-02)); +#469039 = VECTOR('',#469040,1.); +#469040 = DIRECTION('',(0.,1.,0.)); +#469041 = ORIENTED_EDGE('',*,*,#469042,.T.); +#469042 = EDGE_CURVE('',#469035,#469043,#469045,.T.); +#469043 = VERTEX_POINT('',#469044); +#469044 = CARTESIAN_POINT('',(129.146503,-135.563138,-7.5E-02)); +#469045 = LINE('',#469046,#469047); +#469046 = CARTESIAN_POINT('',(129.434594,-135.563138,-7.5E-02)); +#469047 = VECTOR('',#469048,1.); +#469048 = DIRECTION('',(-1.,0.,0.)); +#469049 = ORIENTED_EDGE('',*,*,#469050,.T.); +#469050 = EDGE_CURVE('',#469043,#469051,#469053,.T.); +#469051 = VERTEX_POINT('',#469052); +#469052 = CARTESIAN_POINT('',(129.146503,-136.139319,-7.5E-02)); +#469053 = LINE('',#469054,#469055); +#469054 = CARTESIAN_POINT('',(129.146503,-135.563138,-7.5E-02)); +#469055 = VECTOR('',#469056,1.); +#469056 = DIRECTION('',(0.,-1.,0.)); +#469057 = ORIENTED_EDGE('',*,*,#469058,.T.); +#469058 = EDGE_CURVE('',#469051,#469059,#469061,.T.); +#469059 = VERTEX_POINT('',#469060); +#469060 = CARTESIAN_POINT('',(128.858412,-136.139319,-7.5E-02)); +#469061 = LINE('',#469062,#469063); +#469062 = CARTESIAN_POINT('',(129.146503,-136.139319,-7.5E-02)); +#469063 = VECTOR('',#469064,1.); +#469064 = DIRECTION('',(-1.,0.,0.)); +#469065 = ORIENTED_EDGE('',*,*,#469066,.T.); +#469066 = EDGE_CURVE('',#469059,#469067,#469069,.T.); +#469067 = VERTEX_POINT('',#469068); +#469068 = CARTESIAN_POINT('',(128.858412,-135.851229,-7.5E-02)); +#469069 = LINE('',#469070,#469071); +#469070 = CARTESIAN_POINT('',(128.858412,-136.139319,-7.5E-02)); +#469071 = VECTOR('',#469072,1.); +#469072 = DIRECTION('',(0.,1.,0.)); +#469073 = ORIENTED_EDGE('',*,*,#469074,.T.); +#469074 = EDGE_CURVE('',#469067,#469075,#469077,.T.); +#469075 = VERTEX_POINT('',#469076); +#469076 = CARTESIAN_POINT('',(128.570322,-135.851229,-7.5E-02)); +#469077 = LINE('',#469078,#469079); +#469078 = CARTESIAN_POINT('',(128.858412,-135.851229,-7.5E-02)); +#469079 = VECTOR('',#469080,1.); +#469080 = DIRECTION('',(-1.,0.,0.)); +#469081 = ORIENTED_EDGE('',*,*,#469082,.T.); +#469082 = EDGE_CURVE('',#469075,#469083,#469085,.T.); +#469083 = VERTEX_POINT('',#469084); +#469084 = CARTESIAN_POINT('',(128.570322,-135.563138,-7.5E-02)); +#469085 = LINE('',#469086,#469087); +#469086 = CARTESIAN_POINT('',(128.570322,-135.851229,-7.5E-02)); +#469087 = VECTOR('',#469088,1.); +#469088 = DIRECTION('',(0.,1.,0.)); +#469089 = ORIENTED_EDGE('',*,*,#469090,.T.); +#469090 = EDGE_CURVE('',#469083,#468961,#469091,.T.); +#469091 = LINE('',#469092,#469093); +#469092 = CARTESIAN_POINT('',(128.570322,-135.563138,-7.5E-02)); +#469093 = VECTOR('',#469094,1.); +#469094 = DIRECTION('',(1.,0.,0.)); +#469095 = PLANE('',#469096); +#469096 = AXIS2_PLACEMENT_3D('',#469097,#469098,#469099); +#469097 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469098 = DIRECTION('',(-0.,-0.,-1.)); +#469099 = DIRECTION('',(-1.,0.,0.)); +#469100 = SHELL_BASED_SURFACE_MODEL('',(#469101)); +#469101 = OPEN_SHELL('',(#469102)); +#469102 = ADVANCED_FACE('',(#469103),#469145,.T.); +#469103 = FACE_BOUND('',#469104,.T.); +#469104 = EDGE_LOOP('',(#469105,#469115,#469123,#469131,#469139)); +#469105 = ORIENTED_EDGE('',*,*,#469106,.T.); +#469106 = EDGE_CURVE('',#469107,#469109,#469111,.T.); +#469107 = VERTEX_POINT('',#469108); +#469108 = CARTESIAN_POINT('',(134.044046,-135.851229,-7.5E-02)); +#469109 = VERTEX_POINT('',#469110); +#469110 = CARTESIAN_POINT('',(134.188091,-135.851229,-7.5E-02)); +#469111 = LINE('',#469112,#469113); +#469112 = CARTESIAN_POINT('',(134.044046,-135.851229,-7.5E-02)); +#469113 = VECTOR('',#469114,1.); +#469114 = DIRECTION('',(1.,0.,0.)); +#469115 = ORIENTED_EDGE('',*,*,#469116,.T.); +#469116 = EDGE_CURVE('',#469109,#469117,#469119,.T.); +#469117 = VERTEX_POINT('',#469118); +#469118 = CARTESIAN_POINT('',(134.332136,-135.851229,-7.5E-02)); +#469119 = LINE('',#469120,#469121); +#469120 = CARTESIAN_POINT('',(134.188091,-135.851229,-7.5E-02)); +#469121 = VECTOR('',#469122,1.); +#469122 = DIRECTION('',(1.,0.,0.)); +#469123 = ORIENTED_EDGE('',*,*,#469124,.T.); +#469124 = EDGE_CURVE('',#469117,#469125,#469127,.T.); +#469125 = VERTEX_POINT('',#469126); +#469126 = CARTESIAN_POINT('',(134.332136,-136.139319,-7.5E-02)); +#469127 = LINE('',#469128,#469129); +#469128 = CARTESIAN_POINT('',(134.332136,-135.851229,-7.5E-02)); +#469129 = VECTOR('',#469130,1.); +#469130 = DIRECTION('',(0.,-1.,0.)); +#469131 = ORIENTED_EDGE('',*,*,#469132,.T.); +#469132 = EDGE_CURVE('',#469125,#469133,#469135,.T.); +#469133 = VERTEX_POINT('',#469134); +#469134 = CARTESIAN_POINT('',(134.044046,-136.139319,-7.5E-02)); +#469135 = LINE('',#469136,#469137); +#469136 = CARTESIAN_POINT('',(134.332136,-136.139319,-7.5E-02)); +#469137 = VECTOR('',#469138,1.); +#469138 = DIRECTION('',(-1.,0.,0.)); +#469139 = ORIENTED_EDGE('',*,*,#469140,.T.); +#469140 = EDGE_CURVE('',#469133,#469107,#469141,.T.); +#469141 = LINE('',#469142,#469143); +#469142 = CARTESIAN_POINT('',(134.044046,-136.139319,-7.5E-02)); +#469143 = VECTOR('',#469144,1.); +#469144 = DIRECTION('',(0.,1.,0.)); +#469145 = PLANE('',#469146); +#469146 = AXIS2_PLACEMENT_3D('',#469147,#469148,#469149); +#469147 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469148 = DIRECTION('',(-0.,-0.,-1.)); +#469149 = DIRECTION('',(-1.,0.,0.)); +#469150 = SHELL_BASED_SURFACE_MODEL('',(#469151)); +#469151 = OPEN_SHELL('',(#469152)); +#469152 = ADVANCED_FACE('',(#469153),#469587,.T.); +#469153 = FACE_BOUND('',#469154,.T.); +#469154 = EDGE_LOOP('',(#469155,#469165,#469173,#469181,#469189,#469197, + #469205,#469213,#469221,#469229,#469237,#469245,#469253,#469261, + #469269,#469277,#469285,#469293,#469301,#469309,#469317,#469325, + #469333,#469341,#469349,#469357,#469365,#469373,#469381,#469389, + #469397,#469403,#469411,#469419,#469427,#469435,#469443,#469451, + #469459,#469465,#469473,#469481,#469489,#469497,#469505,#469513, + #469521,#469529,#469537,#469545,#469553,#469559,#469567,#469575, + #469581)); +#469155 = ORIENTED_EDGE('',*,*,#469156,.T.); +#469156 = EDGE_CURVE('',#469157,#469159,#469161,.T.); +#469157 = VERTEX_POINT('',#469158); +#469158 = CARTESIAN_POINT('',(130.875047,-133.258412,-7.5E-02)); +#469159 = VERTEX_POINT('',#469160); +#469160 = CARTESIAN_POINT('',(130.875047,-132.970321,-7.5E-02)); +#469161 = LINE('',#469162,#469163); +#469162 = CARTESIAN_POINT('',(130.875047,-133.258412,-7.5E-02)); +#469163 = VECTOR('',#469164,1.); +#469164 = DIRECTION('',(0.,1.,0.)); +#469165 = ORIENTED_EDGE('',*,*,#469166,.T.); +#469166 = EDGE_CURVE('',#469159,#469167,#469169,.T.); +#469167 = VERTEX_POINT('',#469168); +#469168 = CARTESIAN_POINT('',(132.02741,-132.970321,-7.5E-02)); +#469169 = LINE('',#469170,#469171); +#469170 = CARTESIAN_POINT('',(130.875047,-132.970321,-7.5E-02)); +#469171 = VECTOR('',#469172,1.); +#469172 = DIRECTION('',(1.,0.,0.)); +#469173 = ORIENTED_EDGE('',*,*,#469174,.T.); +#469174 = EDGE_CURVE('',#469167,#469175,#469177,.T.); +#469175 = VERTEX_POINT('',#469176); +#469176 = CARTESIAN_POINT('',(132.02741,-133.114367,-7.5E-02)); +#469177 = LINE('',#469178,#469179); +#469178 = CARTESIAN_POINT('',(132.02741,-132.970321,-7.5E-02)); +#469179 = VECTOR('',#469180,1.); +#469180 = DIRECTION('',(0.,-1.,0.)); +#469181 = ORIENTED_EDGE('',*,*,#469182,.T.); +#469182 = EDGE_CURVE('',#469175,#469183,#469185,.T.); +#469183 = VERTEX_POINT('',#469184); +#469184 = CARTESIAN_POINT('',(132.02741,-133.258412,-7.5E-02)); +#469185 = LINE('',#469186,#469187); +#469186 = CARTESIAN_POINT('',(132.02741,-133.114367,-7.5E-02)); +#469187 = VECTOR('',#469188,1.); +#469188 = DIRECTION('',(0.,-1.,0.)); +#469189 = ORIENTED_EDGE('',*,*,#469190,.T.); +#469190 = EDGE_CURVE('',#469183,#469191,#469193,.T.); +#469191 = VERTEX_POINT('',#469192); +#469192 = CARTESIAN_POINT('',(132.891683,-133.258412,-7.5E-02)); +#469193 = LINE('',#469194,#469195); +#469194 = CARTESIAN_POINT('',(132.02741,-133.258412,-7.5E-02)); +#469195 = VECTOR('',#469196,1.); +#469196 = DIRECTION('',(1.,0.,0.)); +#469197 = ORIENTED_EDGE('',*,*,#469198,.T.); +#469198 = EDGE_CURVE('',#469191,#469199,#469201,.T.); +#469199 = VERTEX_POINT('',#469200); +#469200 = CARTESIAN_POINT('',(132.891683,-132.970321,-7.5E-02)); +#469201 = LINE('',#469202,#469203); +#469202 = CARTESIAN_POINT('',(132.891683,-133.258412,-7.5E-02)); +#469203 = VECTOR('',#469204,1.); +#469204 = DIRECTION('',(0.,1.,0.)); +#469205 = ORIENTED_EDGE('',*,*,#469206,.T.); +#469206 = EDGE_CURVE('',#469199,#469207,#469209,.T.); +#469207 = VERTEX_POINT('',#469208); +#469208 = CARTESIAN_POINT('',(133.179773,-132.970321,-7.5E-02)); +#469209 = LINE('',#469210,#469211); +#469210 = CARTESIAN_POINT('',(132.891683,-132.970321,-7.5E-02)); +#469211 = VECTOR('',#469212,1.); +#469212 = DIRECTION('',(1.,0.,0.)); +#469213 = ORIENTED_EDGE('',*,*,#469214,.T.); +#469214 = EDGE_CURVE('',#469207,#469215,#469217,.T.); +#469215 = VERTEX_POINT('',#469216); +#469216 = CARTESIAN_POINT('',(133.179773,-133.834593,-7.5E-02)); +#469217 = LINE('',#469218,#469219); +#469218 = CARTESIAN_POINT('',(133.179773,-132.970321,-7.5E-02)); +#469219 = VECTOR('',#469220,1.); +#469220 = DIRECTION('',(0.,-1.,0.)); +#469221 = ORIENTED_EDGE('',*,*,#469222,.T.); +#469222 = EDGE_CURVE('',#469215,#469223,#469225,.T.); +#469223 = VERTEX_POINT('',#469224); +#469224 = CARTESIAN_POINT('',(133.467864,-133.834593,-7.5E-02)); +#469225 = LINE('',#469226,#469227); +#469226 = CARTESIAN_POINT('',(133.179773,-133.834593,-7.5E-02)); +#469227 = VECTOR('',#469228,1.); +#469228 = DIRECTION('',(1.,0.,0.)); +#469229 = ORIENTED_EDGE('',*,*,#469230,.T.); +#469230 = EDGE_CURVE('',#469223,#469231,#469233,.T.); +#469231 = VERTEX_POINT('',#469232); +#469232 = CARTESIAN_POINT('',(133.467864,-134.122684,-7.5E-02)); +#469233 = LINE('',#469234,#469235); +#469234 = CARTESIAN_POINT('',(133.467864,-133.834593,-7.5E-02)); +#469235 = VECTOR('',#469236,1.); +#469236 = DIRECTION('',(0.,-1.,0.)); +#469237 = ORIENTED_EDGE('',*,*,#469238,.T.); +#469238 = EDGE_CURVE('',#469231,#469239,#469241,.T.); +#469239 = VERTEX_POINT('',#469240); +#469240 = CARTESIAN_POINT('',(133.179773,-134.122684,-7.5E-02)); +#469241 = LINE('',#469242,#469243); +#469242 = CARTESIAN_POINT('',(133.467864,-134.122684,-7.5E-02)); +#469243 = VECTOR('',#469244,1.); +#469244 = DIRECTION('',(-1.,0.,0.)); +#469245 = ORIENTED_EDGE('',*,*,#469246,.T.); +#469246 = EDGE_CURVE('',#469239,#469247,#469249,.T.); +#469247 = VERTEX_POINT('',#469248); +#469248 = CARTESIAN_POINT('',(133.179773,-134.410775,-7.5E-02)); +#469249 = LINE('',#469250,#469251); +#469250 = CARTESIAN_POINT('',(133.179773,-134.122684,-7.5E-02)); +#469251 = VECTOR('',#469252,1.); +#469252 = DIRECTION('',(0.,-1.,0.)); +#469253 = ORIENTED_EDGE('',*,*,#469254,.T.); +#469254 = EDGE_CURVE('',#469247,#469255,#469257,.T.); +#469255 = VERTEX_POINT('',#469256); +#469256 = CARTESIAN_POINT('',(134.044046,-134.410775,-7.5E-02)); +#469257 = LINE('',#469258,#469259); +#469258 = CARTESIAN_POINT('',(133.179773,-134.410775,-7.5E-02)); +#469259 = VECTOR('',#469260,1.); +#469260 = DIRECTION('',(1.,0.,0.)); +#469261 = ORIENTED_EDGE('',*,*,#469262,.T.); +#469262 = EDGE_CURVE('',#469255,#469263,#469265,.T.); +#469263 = VERTEX_POINT('',#469264); +#469264 = CARTESIAN_POINT('',(134.044046,-134.986956,-7.5E-02)); +#469265 = LINE('',#469266,#469267); +#469266 = CARTESIAN_POINT('',(134.044046,-134.410775,-7.5E-02)); +#469267 = VECTOR('',#469268,1.); +#469268 = DIRECTION('',(0.,-1.,0.)); +#469269 = ORIENTED_EDGE('',*,*,#469270,.T.); +#469270 = EDGE_CURVE('',#469263,#469271,#469273,.T.); +#469271 = VERTEX_POINT('',#469272); +#469272 = CARTESIAN_POINT('',(133.755955,-134.986956,-7.5E-02)); +#469273 = LINE('',#469274,#469275); +#469274 = CARTESIAN_POINT('',(134.044046,-134.986956,-7.5E-02)); +#469275 = VECTOR('',#469276,1.); +#469276 = DIRECTION('',(-1.,0.,0.)); +#469277 = ORIENTED_EDGE('',*,*,#469278,.T.); +#469278 = EDGE_CURVE('',#469271,#469279,#469281,.T.); +#469279 = VERTEX_POINT('',#469280); +#469280 = CARTESIAN_POINT('',(133.755955,-134.698866,-7.5E-02)); +#469281 = LINE('',#469282,#469283); +#469282 = CARTESIAN_POINT('',(133.755955,-134.986956,-7.5E-02)); +#469283 = VECTOR('',#469284,1.); +#469284 = DIRECTION('',(0.,1.,0.)); +#469285 = ORIENTED_EDGE('',*,*,#469286,.T.); +#469286 = EDGE_CURVE('',#469279,#469287,#469289,.T.); +#469287 = VERTEX_POINT('',#469288); +#469288 = CARTESIAN_POINT('',(133.467864,-134.698866,-7.5E-02)); +#469289 = LINE('',#469290,#469291); +#469290 = CARTESIAN_POINT('',(133.755955,-134.698866,-7.5E-02)); +#469291 = VECTOR('',#469292,1.); +#469292 = DIRECTION('',(-1.,0.,0.)); +#469293 = ORIENTED_EDGE('',*,*,#469294,.T.); +#469294 = EDGE_CURVE('',#469287,#469295,#469297,.T.); +#469295 = VERTEX_POINT('',#469296); +#469296 = CARTESIAN_POINT('',(133.467864,-135.275047,-7.5E-02)); +#469297 = LINE('',#469298,#469299); +#469298 = CARTESIAN_POINT('',(133.467864,-134.698866,-7.5E-02)); +#469299 = VECTOR('',#469300,1.); +#469300 = DIRECTION('',(0.,-1.,0.)); +#469301 = ORIENTED_EDGE('',*,*,#469302,.T.); +#469302 = EDGE_CURVE('',#469295,#469303,#469305,.T.); +#469303 = VERTEX_POINT('',#469304); +#469304 = CARTESIAN_POINT('',(133.179773,-135.275047,-7.5E-02)); +#469305 = LINE('',#469306,#469307); +#469306 = CARTESIAN_POINT('',(133.467864,-135.275047,-7.5E-02)); +#469307 = VECTOR('',#469308,1.); +#469308 = DIRECTION('',(-1.,0.,0.)); +#469309 = ORIENTED_EDGE('',*,*,#469310,.T.); +#469310 = EDGE_CURVE('',#469303,#469311,#469313,.T.); +#469311 = VERTEX_POINT('',#469312); +#469312 = CARTESIAN_POINT('',(133.179773,-134.698866,-7.5E-02)); +#469313 = LINE('',#469314,#469315); +#469314 = CARTESIAN_POINT('',(133.179773,-135.275047,-7.5E-02)); +#469315 = VECTOR('',#469316,1.); +#469316 = DIRECTION('',(0.,1.,0.)); +#469317 = ORIENTED_EDGE('',*,*,#469318,.T.); +#469318 = EDGE_CURVE('',#469311,#469319,#469321,.T.); +#469319 = VERTEX_POINT('',#469320); +#469320 = CARTESIAN_POINT('',(132.891683,-134.698866,-7.5E-02)); +#469321 = LINE('',#469322,#469323); +#469322 = CARTESIAN_POINT('',(133.179773,-134.698866,-7.5E-02)); +#469323 = VECTOR('',#469324,1.); +#469324 = DIRECTION('',(-1.,0.,0.)); +#469325 = ORIENTED_EDGE('',*,*,#469326,.T.); +#469326 = EDGE_CURVE('',#469319,#469327,#469329,.T.); +#469327 = VERTEX_POINT('',#469328); +#469328 = CARTESIAN_POINT('',(132.891683,-134.122684,-7.5E-02)); +#469329 = LINE('',#469330,#469331); +#469330 = CARTESIAN_POINT('',(132.891683,-134.698866,-7.5E-02)); +#469331 = VECTOR('',#469332,1.); +#469332 = DIRECTION('',(0.,1.,0.)); +#469333 = ORIENTED_EDGE('',*,*,#469334,.T.); +#469334 = EDGE_CURVE('',#469327,#469335,#469337,.T.); +#469335 = VERTEX_POINT('',#469336); +#469336 = CARTESIAN_POINT('',(132.603592,-134.122684,-7.5E-02)); +#469337 = LINE('',#469338,#469339); +#469338 = CARTESIAN_POINT('',(132.891683,-134.122684,-7.5E-02)); +#469339 = VECTOR('',#469340,1.); +#469340 = DIRECTION('',(-1.,0.,0.)); +#469341 = ORIENTED_EDGE('',*,*,#469342,.T.); +#469342 = EDGE_CURVE('',#469335,#469343,#469345,.T.); +#469343 = VERTEX_POINT('',#469344); +#469344 = CARTESIAN_POINT('',(132.603592,-133.546503,-7.5E-02)); +#469345 = LINE('',#469346,#469347); +#469346 = CARTESIAN_POINT('',(132.603592,-134.122684,-7.5E-02)); +#469347 = VECTOR('',#469348,1.); +#469348 = DIRECTION('',(0.,1.,0.)); +#469349 = ORIENTED_EDGE('',*,*,#469350,.T.); +#469350 = EDGE_CURVE('',#469343,#469351,#469353,.T.); +#469351 = VERTEX_POINT('',#469352); +#469352 = CARTESIAN_POINT('',(132.315501,-133.546503,-7.5E-02)); +#469353 = LINE('',#469354,#469355); +#469354 = CARTESIAN_POINT('',(132.603592,-133.546503,-7.5E-02)); +#469355 = VECTOR('',#469356,1.); +#469356 = DIRECTION('',(-1.,0.,0.)); +#469357 = ORIENTED_EDGE('',*,*,#469358,.T.); +#469358 = EDGE_CURVE('',#469351,#469359,#469361,.T.); +#469359 = VERTEX_POINT('',#469360); +#469360 = CARTESIAN_POINT('',(132.315501,-134.122684,-7.5E-02)); +#469361 = LINE('',#469362,#469363); +#469362 = CARTESIAN_POINT('',(132.315501,-133.546503,-7.5E-02)); +#469363 = VECTOR('',#469364,1.); +#469364 = DIRECTION('',(0.,-1.,0.)); +#469365 = ORIENTED_EDGE('',*,*,#469366,.T.); +#469366 = EDGE_CURVE('',#469359,#469367,#469369,.T.); +#469367 = VERTEX_POINT('',#469368); +#469368 = CARTESIAN_POINT('',(132.02741,-134.122684,-7.5E-02)); +#469369 = LINE('',#469370,#469371); +#469370 = CARTESIAN_POINT('',(132.315501,-134.122684,-7.5E-02)); +#469371 = VECTOR('',#469372,1.); +#469372 = DIRECTION('',(-1.,0.,0.)); +#469373 = ORIENTED_EDGE('',*,*,#469374,.T.); +#469374 = EDGE_CURVE('',#469367,#469375,#469377,.T.); +#469375 = VERTEX_POINT('',#469376); +#469376 = CARTESIAN_POINT('',(132.02741,-133.834593,-7.5E-02)); +#469377 = LINE('',#469378,#469379); +#469378 = CARTESIAN_POINT('',(132.02741,-134.122684,-7.5E-02)); +#469379 = VECTOR('',#469380,1.); +#469380 = DIRECTION('',(0.,1.,0.)); +#469381 = ORIENTED_EDGE('',*,*,#469382,.T.); +#469382 = EDGE_CURVE('',#469375,#469383,#469385,.T.); +#469383 = VERTEX_POINT('',#469384); +#469384 = CARTESIAN_POINT('',(131.73932,-133.834593,-7.5E-02)); +#469385 = LINE('',#469386,#469387); +#469386 = CARTESIAN_POINT('',(132.02741,-133.834593,-7.5E-02)); +#469387 = VECTOR('',#469388,1.); +#469388 = DIRECTION('',(-1.,0.,0.)); +#469389 = ORIENTED_EDGE('',*,*,#469390,.T.); +#469390 = EDGE_CURVE('',#469383,#469391,#469393,.T.); +#469391 = VERTEX_POINT('',#469392); +#469392 = CARTESIAN_POINT('',(131.73932,-134.122684,-7.5E-02)); +#469393 = LINE('',#469394,#469395); +#469394 = CARTESIAN_POINT('',(131.73932,-133.834593,-7.5E-02)); +#469395 = VECTOR('',#469396,1.); +#469396 = DIRECTION('',(0.,-1.,0.)); +#469397 = ORIENTED_EDGE('',*,*,#469398,.T.); +#469398 = EDGE_CURVE('',#469391,#469367,#469399,.T.); +#469399 = LINE('',#469400,#469401); +#469400 = CARTESIAN_POINT('',(131.73932,-134.122684,-7.5E-02)); +#469401 = VECTOR('',#469402,1.); +#469402 = DIRECTION('',(1.,0.,0.)); +#469403 = ORIENTED_EDGE('',*,*,#469404,.T.); +#469404 = EDGE_CURVE('',#469367,#469405,#469407,.T.); +#469405 = VERTEX_POINT('',#469406); +#469406 = CARTESIAN_POINT('',(132.02741,-134.698866,-7.5E-02)); +#469407 = LINE('',#469408,#469409); +#469408 = CARTESIAN_POINT('',(132.02741,-134.122684,-7.5E-02)); +#469409 = VECTOR('',#469410,1.); +#469410 = DIRECTION('',(0.,-1.,0.)); +#469411 = ORIENTED_EDGE('',*,*,#469412,.T.); +#469412 = EDGE_CURVE('',#469405,#469413,#469415,.T.); +#469413 = VERTEX_POINT('',#469414); +#469414 = CARTESIAN_POINT('',(131.73932,-134.698866,-7.5E-02)); +#469415 = LINE('',#469416,#469417); +#469416 = CARTESIAN_POINT('',(132.02741,-134.698866,-7.5E-02)); +#469417 = VECTOR('',#469418,1.); +#469418 = DIRECTION('',(-1.,0.,0.)); +#469419 = ORIENTED_EDGE('',*,*,#469420,.T.); +#469420 = EDGE_CURVE('',#469413,#469421,#469423,.T.); +#469421 = VERTEX_POINT('',#469422); +#469422 = CARTESIAN_POINT('',(131.73932,-134.986956,-7.5E-02)); +#469423 = LINE('',#469424,#469425); +#469424 = CARTESIAN_POINT('',(131.73932,-134.698866,-7.5E-02)); +#469425 = VECTOR('',#469426,1.); +#469426 = DIRECTION('',(0.,-1.,0.)); +#469427 = ORIENTED_EDGE('',*,*,#469428,.T.); +#469428 = EDGE_CURVE('',#469421,#469429,#469431,.T.); +#469429 = VERTEX_POINT('',#469430); +#469430 = CARTESIAN_POINT('',(131.451229,-134.986956,-7.5E-02)); +#469431 = LINE('',#469432,#469433); +#469432 = CARTESIAN_POINT('',(131.73932,-134.986956,-7.5E-02)); +#469433 = VECTOR('',#469434,1.); +#469434 = DIRECTION('',(-1.,0.,0.)); +#469435 = ORIENTED_EDGE('',*,*,#469436,.T.); +#469436 = EDGE_CURVE('',#469429,#469437,#469439,.T.); +#469437 = VERTEX_POINT('',#469438); +#469438 = CARTESIAN_POINT('',(131.451229,-134.698866,-7.5E-02)); +#469439 = LINE('',#469440,#469441); +#469440 = CARTESIAN_POINT('',(131.451229,-134.986956,-7.5E-02)); +#469441 = VECTOR('',#469442,1.); +#469442 = DIRECTION('',(0.,1.,0.)); +#469443 = ORIENTED_EDGE('',*,*,#469444,.T.); +#469444 = EDGE_CURVE('',#469437,#469445,#469447,.T.); +#469445 = VERTEX_POINT('',#469446); +#469446 = CARTESIAN_POINT('',(131.163138,-134.698866,-7.5E-02)); +#469447 = LINE('',#469448,#469449); +#469448 = CARTESIAN_POINT('',(131.451229,-134.698866,-7.5E-02)); +#469449 = VECTOR('',#469450,1.); +#469450 = DIRECTION('',(-1.,0.,0.)); +#469451 = ORIENTED_EDGE('',*,*,#469452,.T.); +#469452 = EDGE_CURVE('',#469445,#469453,#469455,.T.); +#469453 = VERTEX_POINT('',#469454); +#469454 = CARTESIAN_POINT('',(131.163138,-134.986956,-7.5E-02)); +#469455 = LINE('',#469456,#469457); +#469456 = CARTESIAN_POINT('',(131.163138,-134.698866,-7.5E-02)); +#469457 = VECTOR('',#469458,1.); +#469458 = DIRECTION('',(0.,-1.,0.)); +#469459 = ORIENTED_EDGE('',*,*,#469460,.T.); +#469460 = EDGE_CURVE('',#469453,#469429,#469461,.T.); +#469461 = LINE('',#469462,#469463); +#469462 = CARTESIAN_POINT('',(131.163138,-134.986956,-7.5E-02)); +#469463 = VECTOR('',#469464,1.); +#469464 = DIRECTION('',(1.,0.,0.)); +#469465 = ORIENTED_EDGE('',*,*,#469466,.T.); +#469466 = EDGE_CURVE('',#469429,#469467,#469469,.T.); +#469467 = VERTEX_POINT('',#469468); +#469468 = CARTESIAN_POINT('',(131.451229,-135.851229,-7.5E-02)); +#469469 = LINE('',#469470,#469471); +#469470 = CARTESIAN_POINT('',(131.451229,-134.986956,-7.5E-02)); +#469471 = VECTOR('',#469472,1.); +#469472 = DIRECTION('',(0.,-1.,0.)); +#469473 = ORIENTED_EDGE('',*,*,#469474,.T.); +#469474 = EDGE_CURVE('',#469467,#469475,#469477,.T.); +#469475 = VERTEX_POINT('',#469476); +#469476 = CARTESIAN_POINT('',(131.163138,-135.851229,-7.5E-02)); +#469477 = LINE('',#469478,#469479); +#469478 = CARTESIAN_POINT('',(131.451229,-135.851229,-7.5E-02)); +#469479 = VECTOR('',#469480,1.); +#469480 = DIRECTION('',(-1.,0.,0.)); +#469481 = ORIENTED_EDGE('',*,*,#469482,.T.); +#469482 = EDGE_CURVE('',#469475,#469483,#469485,.T.); +#469483 = VERTEX_POINT('',#469484); +#469484 = CARTESIAN_POINT('',(131.163138,-135.275047,-7.5E-02)); +#469485 = LINE('',#469486,#469487); +#469486 = CARTESIAN_POINT('',(131.163138,-135.851229,-7.5E-02)); +#469487 = VECTOR('',#469488,1.); +#469488 = DIRECTION('',(0.,1.,0.)); +#469489 = ORIENTED_EDGE('',*,*,#469490,.T.); +#469490 = EDGE_CURVE('',#469483,#469491,#469493,.T.); +#469491 = VERTEX_POINT('',#469492); +#469492 = CARTESIAN_POINT('',(130.875047,-135.275047,-7.5E-02)); +#469493 = LINE('',#469494,#469495); +#469494 = CARTESIAN_POINT('',(131.163138,-135.275047,-7.5E-02)); +#469495 = VECTOR('',#469496,1.); +#469496 = DIRECTION('',(-1.,0.,0.)); +#469497 = ORIENTED_EDGE('',*,*,#469498,.T.); +#469498 = EDGE_CURVE('',#469491,#469499,#469501,.T.); +#469499 = VERTEX_POINT('',#469500); +#469500 = CARTESIAN_POINT('',(130.875047,-134.122684,-7.5E-02)); +#469501 = LINE('',#469502,#469503); +#469502 = CARTESIAN_POINT('',(130.875047,-135.275047,-7.5E-02)); +#469503 = VECTOR('',#469504,1.); +#469504 = DIRECTION('',(0.,1.,0.)); +#469505 = ORIENTED_EDGE('',*,*,#469506,.T.); +#469506 = EDGE_CURVE('',#469499,#469507,#469509,.T.); +#469507 = VERTEX_POINT('',#469508); +#469508 = CARTESIAN_POINT('',(131.163138,-134.122684,-7.5E-02)); +#469509 = LINE('',#469510,#469511); +#469510 = CARTESIAN_POINT('',(130.875047,-134.122684,-7.5E-02)); +#469511 = VECTOR('',#469512,1.); +#469512 = DIRECTION('',(1.,0.,0.)); +#469513 = ORIENTED_EDGE('',*,*,#469514,.T.); +#469514 = EDGE_CURVE('',#469507,#469515,#469517,.T.); +#469515 = VERTEX_POINT('',#469516); +#469516 = CARTESIAN_POINT('',(131.163138,-133.834593,-7.5E-02)); +#469517 = LINE('',#469518,#469519); +#469518 = CARTESIAN_POINT('',(131.163138,-134.122684,-7.5E-02)); +#469519 = VECTOR('',#469520,1.); +#469520 = DIRECTION('',(0.,1.,0.)); +#469521 = ORIENTED_EDGE('',*,*,#469522,.T.); +#469522 = EDGE_CURVE('',#469515,#469523,#469525,.T.); +#469523 = VERTEX_POINT('',#469524); +#469524 = CARTESIAN_POINT('',(130.875047,-133.834593,-7.5E-02)); +#469525 = LINE('',#469526,#469527); +#469526 = CARTESIAN_POINT('',(131.163138,-133.834593,-7.5E-02)); +#469527 = VECTOR('',#469528,1.); +#469528 = DIRECTION('',(-1.,0.,0.)); +#469529 = ORIENTED_EDGE('',*,*,#469530,.T.); +#469530 = EDGE_CURVE('',#469523,#469531,#469533,.T.); +#469531 = VERTEX_POINT('',#469532); +#469532 = CARTESIAN_POINT('',(130.875047,-133.546503,-7.5E-02)); +#469533 = LINE('',#469534,#469535); +#469534 = CARTESIAN_POINT('',(130.875047,-133.834593,-7.5E-02)); +#469535 = VECTOR('',#469536,1.); +#469536 = DIRECTION('',(0.,1.,0.)); +#469537 = ORIENTED_EDGE('',*,*,#469538,.T.); +#469538 = EDGE_CURVE('',#469531,#469539,#469541,.T.); +#469539 = VERTEX_POINT('',#469540); +#469540 = CARTESIAN_POINT('',(131.451229,-133.546503,-7.5E-02)); +#469541 = LINE('',#469542,#469543); +#469542 = CARTESIAN_POINT('',(130.875047,-133.546503,-7.5E-02)); +#469543 = VECTOR('',#469544,1.); +#469544 = DIRECTION('',(1.,0.,0.)); +#469545 = ORIENTED_EDGE('',*,*,#469546,.T.); +#469546 = EDGE_CURVE('',#469539,#469547,#469549,.T.); +#469547 = VERTEX_POINT('',#469548); +#469548 = CARTESIAN_POINT('',(131.451229,-133.834593,-7.5E-02)); +#469549 = LINE('',#469550,#469551); +#469550 = CARTESIAN_POINT('',(131.451229,-133.546503,-7.5E-02)); +#469551 = VECTOR('',#469552,1.); +#469552 = DIRECTION('',(0.,-1.,0.)); +#469553 = ORIENTED_EDGE('',*,*,#469554,.T.); +#469554 = EDGE_CURVE('',#469547,#469383,#469555,.T.); +#469555 = LINE('',#469556,#469557); +#469556 = CARTESIAN_POINT('',(131.451229,-133.834593,-7.5E-02)); +#469557 = VECTOR('',#469558,1.); +#469558 = DIRECTION('',(1.,0.,0.)); +#469559 = ORIENTED_EDGE('',*,*,#469560,.T.); +#469560 = EDGE_CURVE('',#469383,#469561,#469563,.T.); +#469561 = VERTEX_POINT('',#469562); +#469562 = CARTESIAN_POINT('',(131.73932,-133.546503,-7.5E-02)); +#469563 = LINE('',#469564,#469565); +#469564 = CARTESIAN_POINT('',(131.73932,-133.834593,-7.5E-02)); +#469565 = VECTOR('',#469566,1.); +#469566 = DIRECTION('',(0.,1.,0.)); +#469567 = ORIENTED_EDGE('',*,*,#469568,.T.); +#469568 = EDGE_CURVE('',#469561,#469569,#469571,.T.); +#469569 = VERTEX_POINT('',#469570); +#469570 = CARTESIAN_POINT('',(132.02741,-133.546503,-7.5E-02)); +#469571 = LINE('',#469572,#469573); +#469572 = CARTESIAN_POINT('',(131.73932,-133.546503,-7.5E-02)); +#469573 = VECTOR('',#469574,1.); +#469574 = DIRECTION('',(1.,0.,0.)); +#469575 = ORIENTED_EDGE('',*,*,#469576,.T.); +#469576 = EDGE_CURVE('',#469569,#469183,#469577,.T.); +#469577 = LINE('',#469578,#469579); +#469578 = CARTESIAN_POINT('',(132.02741,-133.546503,-7.5E-02)); +#469579 = VECTOR('',#469580,1.); +#469580 = DIRECTION('',(0.,1.,0.)); +#469581 = ORIENTED_EDGE('',*,*,#469582,.T.); +#469582 = EDGE_CURVE('',#469183,#469157,#469583,.T.); +#469583 = LINE('',#469584,#469585); +#469584 = CARTESIAN_POINT('',(132.02741,-133.258412,-7.5E-02)); +#469585 = VECTOR('',#469586,1.); +#469586 = DIRECTION('',(-1.,0.,0.)); +#469587 = PLANE('',#469588); +#469588 = AXIS2_PLACEMENT_3D('',#469589,#469590,#469591); +#469589 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469590 = DIRECTION('',(-0.,-0.,-1.)); +#469591 = DIRECTION('',(-1.,0.,0.)); +#469592 = SHELL_BASED_SURFACE_MODEL('',(#469593)); +#469593 = OPEN_SHELL('',(#469594)); +#469594 = ADVANCED_FACE('',(#469595),#469637,.T.); +#469595 = FACE_BOUND('',#469596,.T.); +#469596 = EDGE_LOOP('',(#469597,#469607,#469615,#469623,#469631)); +#469597 = ORIENTED_EDGE('',*,*,#469598,.T.); +#469598 = EDGE_CURVE('',#469599,#469601,#469603,.T.); +#469599 = VERTEX_POINT('',#469600); +#469600 = CARTESIAN_POINT('',(136.636862,-135.563138,-7.5E-02)); +#469601 = VERTEX_POINT('',#469602); +#469602 = CARTESIAN_POINT('',(136.780908,-135.563138,-7.5E-02)); +#469603 = LINE('',#469604,#469605); +#469604 = CARTESIAN_POINT('',(136.636862,-135.563138,-7.5E-02)); +#469605 = VECTOR('',#469606,1.); +#469606 = DIRECTION('',(1.,0.,0.)); +#469607 = ORIENTED_EDGE('',*,*,#469608,.T.); +#469608 = EDGE_CURVE('',#469601,#469609,#469611,.T.); +#469609 = VERTEX_POINT('',#469610); +#469610 = CARTESIAN_POINT('',(136.924953,-135.563138,-7.5E-02)); +#469611 = LINE('',#469612,#469613); +#469612 = CARTESIAN_POINT('',(136.780908,-135.563138,-7.5E-02)); +#469613 = VECTOR('',#469614,1.); +#469614 = DIRECTION('',(1.,0.,0.)); +#469615 = ORIENTED_EDGE('',*,*,#469616,.T.); +#469616 = EDGE_CURVE('',#469609,#469617,#469619,.T.); +#469617 = VERTEX_POINT('',#469618); +#469618 = CARTESIAN_POINT('',(136.924953,-135.851229,-7.5E-02)); +#469619 = LINE('',#469620,#469621); +#469620 = CARTESIAN_POINT('',(136.924953,-135.563138,-7.5E-02)); +#469621 = VECTOR('',#469622,1.); +#469622 = DIRECTION('',(0.,-1.,0.)); +#469623 = ORIENTED_EDGE('',*,*,#469624,.T.); +#469624 = EDGE_CURVE('',#469617,#469625,#469627,.T.); +#469625 = VERTEX_POINT('',#469626); +#469626 = CARTESIAN_POINT('',(136.636862,-135.851229,-7.5E-02)); +#469627 = LINE('',#469628,#469629); +#469628 = CARTESIAN_POINT('',(136.924953,-135.851229,-7.5E-02)); +#469629 = VECTOR('',#469630,1.); +#469630 = DIRECTION('',(-1.,0.,0.)); +#469631 = ORIENTED_EDGE('',*,*,#469632,.T.); +#469632 = EDGE_CURVE('',#469625,#469599,#469633,.T.); +#469633 = LINE('',#469634,#469635); +#469634 = CARTESIAN_POINT('',(136.636862,-135.851229,-7.5E-02)); +#469635 = VECTOR('',#469636,1.); +#469636 = DIRECTION('',(0.,1.,0.)); +#469637 = PLANE('',#469638); +#469638 = AXIS2_PLACEMENT_3D('',#469639,#469640,#469641); +#469639 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469640 = DIRECTION('',(-0.,-0.,-1.)); +#469641 = DIRECTION('',(-1.,0.,0.)); +#469642 = SHELL_BASED_SURFACE_MODEL('',(#469643)); +#469643 = OPEN_SHELL('',(#469644)); +#469644 = ADVANCED_FACE('',(#469645),#469869,.T.); +#469645 = FACE_BOUND('',#469646,.T.); +#469646 = EDGE_LOOP('',(#469647,#469658,#469666,#469675,#469683,#469691, + #469699,#469707,#469715,#469723,#469731,#469740,#469748,#469756, + #469765,#469773,#469781,#469790,#469798,#469806,#469814,#469823, + #469831,#469839,#469847,#469855,#469863)); +#469647 = ORIENTED_EDGE('',*,*,#469648,.T.); +#469648 = EDGE_CURVE('',#469649,#469651,#469653,.T.); +#469649 = VERTEX_POINT('',#469650); +#469650 = CARTESIAN_POINT('',(153.386618,-134.807222,-7.5E-02)); +#469651 = VERTEX_POINT('',#469652); +#469652 = CARTESIAN_POINT('',(153.405752,-134.711028,-7.5E-02)); +#469653 = CIRCLE('',#469654,4.999998452108E-02); +#469654 = AXIS2_PLACEMENT_3D('',#469655,#469656,#469657); +#469655 = CARTESIAN_POINT('',(153.40575203736,-134.7610279845,-7.5E-02) + ); +#469656 = DIRECTION('',(0.,0.,-1.)); +#469657 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#469658 = ORIENTED_EDGE('',*,*,#469659,.T.); +#469659 = EDGE_CURVE('',#469651,#469660,#469662,.T.); +#469660 = VERTEX_POINT('',#469661); +#469661 = CARTESIAN_POINT('',(154.072419,-134.711028,-7.5E-02)); +#469662 = LINE('',#469663,#469664); +#469663 = CARTESIAN_POINT('',(153.405752,-134.711028,-7.5E-02)); +#469664 = VECTOR('',#469665,1.); +#469665 = DIRECTION('',(1.,0.,0.)); +#469666 = ORIENTED_EDGE('',*,*,#469667,.T.); +#469667 = EDGE_CURVE('',#469660,#469668,#469670,.T.); +#469668 = VERTEX_POINT('',#469669); +#469669 = CARTESIAN_POINT('',(154.072419,-134.811028,-7.5E-02)); +#469670 = CIRCLE('',#469671,5.000000000002E-02); +#469671 = AXIS2_PLACEMENT_3D('',#469672,#469673,#469674); +#469672 = CARTESIAN_POINT('',(154.07241895228,-134.761028,-7.5E-02)); +#469673 = DIRECTION('',(0.,0.,-1.)); +#469674 = DIRECTION('',(9.542361567582E-07,1.,0.)); +#469675 = ORIENTED_EDGE('',*,*,#469676,.T.); +#469676 = EDGE_CURVE('',#469668,#469677,#469679,.T.); +#469677 = VERTEX_POINT('',#469678); +#469678 = CARTESIAN_POINT('',(153.521701,-134.811028,-7.5E-02)); +#469679 = LINE('',#469680,#469681); +#469680 = CARTESIAN_POINT('',(154.072419,-134.811028,-7.5E-02)); +#469681 = VECTOR('',#469682,1.); +#469682 = DIRECTION('',(-1.,0.,0.)); +#469683 = ORIENTED_EDGE('',*,*,#469684,.T.); +#469684 = EDGE_CURVE('',#469677,#469685,#469687,.T.); +#469685 = VERTEX_POINT('',#469686); +#469686 = CARTESIAN_POINT('',(153.494463,-134.838264,-7.5E-02)); +#469687 = LINE('',#469688,#469689); +#469688 = CARTESIAN_POINT('',(153.521701,-134.811028,-7.5E-02)); +#469689 = VECTOR('',#469690,1.); +#469690 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#469691 = ORIENTED_EDGE('',*,*,#469692,.T.); +#469692 = EDGE_CURVE('',#469685,#469693,#469695,.T.); +#469693 = VERTEX_POINT('',#469694); +#469694 = CARTESIAN_POINT('',(153.455752,-134.915688,-7.5E-02)); +#469695 = LINE('',#469696,#469697); +#469696 = CARTESIAN_POINT('',(153.494463,-134.838264,-7.5E-02)); +#469697 = VECTOR('',#469698,1.); +#469698 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#469699 = ORIENTED_EDGE('',*,*,#469700,.T.); +#469700 = EDGE_CURVE('',#469693,#469701,#469703,.T.); +#469701 = VERTEX_POINT('',#469702); +#469702 = CARTESIAN_POINT('',(153.455752,-135.034939,-7.5E-02)); +#469703 = LINE('',#469704,#469705); +#469704 = CARTESIAN_POINT('',(153.455752,-134.915688,-7.5E-02)); +#469705 = VECTOR('',#469706,1.); +#469706 = DIRECTION('',(0.,-1.,0.)); +#469707 = ORIENTED_EDGE('',*,*,#469708,.T.); +#469708 = EDGE_CURVE('',#469701,#469709,#469711,.T.); +#469709 = VERTEX_POINT('',#469710); +#469710 = CARTESIAN_POINT('',(153.490638,-135.104712,-7.5E-02)); +#469711 = LINE('',#469712,#469713); +#469712 = CARTESIAN_POINT('',(153.455752,-135.034939,-7.5E-02)); +#469713 = VECTOR('',#469714,1.); +#469714 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#469715 = ORIENTED_EDGE('',*,*,#469716,.T.); +#469716 = EDGE_CURVE('',#469709,#469717,#469719,.T.); +#469717 = VERTEX_POINT('',#469718); +#469718 = CARTESIAN_POINT('',(153.560413,-135.139599,-7.5E-02)); +#469719 = LINE('',#469720,#469721); +#469720 = CARTESIAN_POINT('',(153.490638,-135.104712,-7.5E-02)); +#469721 = VECTOR('',#469722,1.); +#469722 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#469723 = ORIENTED_EDGE('',*,*,#469724,.T.); +#469724 = EDGE_CURVE('',#469717,#469725,#469727,.T.); +#469725 = VERTEX_POINT('',#469726); +#469726 = CARTESIAN_POINT('',(154.072419,-135.139599,-7.5E-02)); +#469727 = LINE('',#469728,#469729); +#469728 = CARTESIAN_POINT('',(153.560413,-135.139599,-7.5E-02)); +#469729 = VECTOR('',#469730,1.); +#469730 = DIRECTION('',(1.,0.,0.)); +#469731 = ORIENTED_EDGE('',*,*,#469732,.T.); +#469732 = EDGE_CURVE('',#469725,#469733,#469735,.T.); +#469733 = VERTEX_POINT('',#469734); +#469734 = CARTESIAN_POINT('',(154.072419,-135.239599,-7.5E-02)); +#469735 = CIRCLE('',#469736,5.000000000002E-02); +#469736 = AXIS2_PLACEMENT_3D('',#469737,#469738,#469739); +#469737 = CARTESIAN_POINT('',(154.07241895228,-135.189599,-7.5E-02)); +#469738 = DIRECTION('',(0.,0.,-1.)); +#469739 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#469740 = ORIENTED_EDGE('',*,*,#469741,.T.); +#469741 = EDGE_CURVE('',#469733,#469742,#469744,.T.); +#469742 = VERTEX_POINT('',#469743); +#469743 = CARTESIAN_POINT('',(153.560413,-135.239599,-7.5E-02)); +#469744 = LINE('',#469745,#469746); +#469745 = CARTESIAN_POINT('',(154.072419,-135.239599,-7.5E-02)); +#469746 = VECTOR('',#469747,1.); +#469747 = DIRECTION('',(-1.,0.,0.)); +#469748 = ORIENTED_EDGE('',*,*,#469749,.T.); +#469749 = EDGE_CURVE('',#469742,#469750,#469752,.T.); +#469750 = VERTEX_POINT('',#469751); +#469751 = CARTESIAN_POINT('',(153.490638,-135.274485,-7.5E-02)); +#469752 = LINE('',#469753,#469754); +#469753 = CARTESIAN_POINT('',(153.560413,-135.239599,-7.5E-02)); +#469754 = VECTOR('',#469755,1.); +#469755 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#469756 = ORIENTED_EDGE('',*,*,#469757,.T.); +#469757 = EDGE_CURVE('',#469750,#469758,#469760,.T.); +#469758 = VERTEX_POINT('',#469759); +#469759 = CARTESIAN_POINT('',(153.490638,-135.533284,-7.5E-02)); +#469760 = CIRCLE('',#469761,0.214910383045); +#469761 = AXIS2_PLACEMENT_3D('',#469762,#469763,#469764); +#469762 = CARTESIAN_POINT('',(153.66222541836,-135.4038845,-7.5E-02)); +#469763 = DIRECTION('',(0.,0.,1.)); +#469764 = DIRECTION('',(-0.798413812918,0.602109112489,0.)); +#469765 = ORIENTED_EDGE('',*,*,#469766,.T.); +#469766 = EDGE_CURVE('',#469758,#469767,#469769,.T.); +#469767 = VERTEX_POINT('',#469768); +#469768 = CARTESIAN_POINT('',(153.560413,-135.568171,-7.5E-02)); +#469769 = LINE('',#469770,#469771); +#469770 = CARTESIAN_POINT('',(153.490638,-135.533284,-7.5E-02)); +#469771 = VECTOR('',#469772,1.); +#469772 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#469773 = ORIENTED_EDGE('',*,*,#469774,.T.); +#469774 = EDGE_CURVE('',#469767,#469775,#469777,.T.); +#469775 = VERTEX_POINT('',#469776); +#469776 = CARTESIAN_POINT('',(154.072419,-135.568171,-7.5E-02)); +#469777 = LINE('',#469778,#469779); +#469778 = CARTESIAN_POINT('',(153.560413,-135.568171,-7.5E-02)); +#469779 = VECTOR('',#469780,1.); +#469780 = DIRECTION('',(1.,0.,0.)); +#469781 = ORIENTED_EDGE('',*,*,#469782,.T.); +#469782 = EDGE_CURVE('',#469775,#469783,#469785,.T.); +#469783 = VERTEX_POINT('',#469784); +#469784 = CARTESIAN_POINT('',(154.072419,-135.668171,-7.5E-02)); +#469785 = CIRCLE('',#469786,5.000000000002E-02); +#469786 = AXIS2_PLACEMENT_3D('',#469787,#469788,#469789); +#469787 = CARTESIAN_POINT('',(154.07241895228,-135.618171,-7.5E-02)); +#469788 = DIRECTION('',(0.,0.,-1.)); +#469789 = DIRECTION('',(9.542361567582E-07,1.,0.)); +#469790 = ORIENTED_EDGE('',*,*,#469791,.T.); +#469791 = EDGE_CURVE('',#469783,#469792,#469794,.T.); +#469792 = VERTEX_POINT('',#469793); +#469793 = CARTESIAN_POINT('',(153.537336,-135.665928,-7.5E-02)); +#469794 = LINE('',#469795,#469796); +#469795 = CARTESIAN_POINT('',(154.072419,-135.668171,-7.5E-02)); +#469796 = VECTOR('',#469797,1.); +#469797 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#469798 = ORIENTED_EDGE('',*,*,#469799,.T.); +#469799 = EDGE_CURVE('',#469792,#469800,#469802,.T.); +#469800 = VERTEX_POINT('',#469801); +#469801 = CARTESIAN_POINT('',(153.420611,-135.608324,-7.5E-02)); +#469802 = LINE('',#469803,#469804); +#469803 = CARTESIAN_POINT('',(153.537336,-135.665928,-7.5E-02)); +#469804 = VECTOR('',#469805,1.); +#469805 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#469806 = ORIENTED_EDGE('',*,*,#469807,.T.); +#469807 = EDGE_CURVE('',#469800,#469808,#469810,.T.); +#469808 = VERTEX_POINT('',#469809); +#469809 = CARTESIAN_POINT('',(153.408649,-135.592912,-7.5E-02)); +#469810 = LINE('',#469811,#469812); +#469811 = CARTESIAN_POINT('',(153.420611,-135.608324,-7.5E-02)); +#469812 = VECTOR('',#469813,1.); +#469813 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#469814 = ORIENTED_EDGE('',*,*,#469815,.T.); +#469815 = EDGE_CURVE('',#469808,#469816,#469818,.T.); +#469816 = VERTEX_POINT('',#469817); +#469817 = CARTESIAN_POINT('',(153.415598,-135.204458,-7.5E-02)); +#469818 = CIRCLE('',#469819,0.322687307627); +#469819 = AXIS2_PLACEMENT_3D('',#469820,#469821,#469822); +#469820 = CARTESIAN_POINT('',(153.66974659635,-135.403293584,-7.5E-02)); +#469821 = DIRECTION('',(0.,0.,-1.)); +#469822 = DIRECTION('',(-0.809135005275,-0.587622789924,-0.)); +#469823 = ORIENTED_EDGE('',*,*,#469824,.T.); +#469824 = EDGE_CURVE('',#469816,#469825,#469827,.T.); +#469825 = VERTEX_POINT('',#469826); +#469826 = CARTESIAN_POINT('',(153.436806,-135.189599,-7.5E-02)); +#469827 = LINE('',#469828,#469829); +#469828 = CARTESIAN_POINT('',(153.415598,-135.204458,-7.5E-02)); +#469829 = VECTOR('',#469830,1.); +#469830 = DIRECTION('',(0.818988741404,0.573809586407,0.)); +#469831 = ORIENTED_EDGE('',*,*,#469832,.T.); +#469832 = EDGE_CURVE('',#469825,#469833,#469835,.T.); +#469833 = VERTEX_POINT('',#469834); +#469834 = CARTESIAN_POINT('',(153.414752,-135.172204,-7.5E-02)); +#469835 = LINE('',#469836,#469837); +#469836 = CARTESIAN_POINT('',(153.436806,-135.189599,-7.5E-02)); +#469837 = VECTOR('',#469838,1.); +#469838 = DIRECTION('',(-0.78516063526,0.619292157901,0.)); +#469839 = ORIENTED_EDGE('',*,*,#469840,.T.); +#469840 = EDGE_CURVE('',#469833,#469841,#469843,.T.); +#469841 = VERTEX_POINT('',#469842); +#469842 = CARTESIAN_POINT('',(153.357994,-135.058014,-7.5E-02)); +#469843 = LINE('',#469844,#469845); +#469844 = CARTESIAN_POINT('',(153.414752,-135.172204,-7.5E-02)); +#469845 = VECTOR('',#469846,1.); +#469846 = DIRECTION('',(-0.44509813391,0.895481798358,0.)); +#469847 = ORIENTED_EDGE('',*,*,#469848,.T.); +#469848 = EDGE_CURVE('',#469841,#469849,#469851,.T.); +#469849 = VERTEX_POINT('',#469850); +#469850 = CARTESIAN_POINT('',(153.357994,-134.892612,-7.5E-02)); +#469851 = LINE('',#469852,#469853); +#469852 = CARTESIAN_POINT('',(153.357994,-135.058014,-7.5E-02)); +#469853 = VECTOR('',#469854,1.); +#469854 = DIRECTION('',(0.,1.,0.)); +#469855 = ORIENTED_EDGE('',*,*,#469856,.T.); +#469856 = EDGE_CURVE('',#469849,#469857,#469859,.T.); +#469857 = VERTEX_POINT('',#469858); +#469858 = CARTESIAN_POINT('',(153.397135,-134.809314,-7.5E-02)); +#469859 = LINE('',#469860,#469861); +#469860 = CARTESIAN_POINT('',(153.357994,-134.892612,-7.5E-02)); +#469861 = VECTOR('',#469862,1.); +#469862 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#469863 = ORIENTED_EDGE('',*,*,#469864,.T.); +#469864 = EDGE_CURVE('',#469857,#469649,#469865,.T.); +#469865 = LINE('',#469866,#469867); +#469866 = CARTESIAN_POINT('',(153.397135,-134.809314,-7.5E-02)); +#469867 = VECTOR('',#469868,1.); +#469868 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#469869 = PLANE('',#469870); +#469870 = AXIS2_PLACEMENT_3D('',#469871,#469872,#469873); +#469871 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469872 = DIRECTION('',(-0.,-0.,-1.)); +#469873 = DIRECTION('',(-1.,0.,0.)); +#469874 = SHELL_BASED_SURFACE_MODEL('',(#469875)); +#469875 = OPEN_SHELL('',(#469876)); +#469876 = ADVANCED_FACE('',(#469877),#469919,.T.); +#469877 = FACE_BOUND('',#469878,.T.); +#469878 = EDGE_LOOP('',(#469879,#469889,#469897,#469905,#469913)); +#469879 = ORIENTED_EDGE('',*,*,#469880,.T.); +#469880 = EDGE_CURVE('',#469881,#469883,#469885,.T.); +#469881 = VERTEX_POINT('',#469882); +#469882 = CARTESIAN_POINT('',(131.73932,-135.563138,-7.5E-02)); +#469883 = VERTEX_POINT('',#469884); +#469884 = CARTESIAN_POINT('',(131.73932,-135.275047,-7.5E-02)); +#469885 = LINE('',#469886,#469887); +#469886 = CARTESIAN_POINT('',(131.73932,-135.563138,-7.5E-02)); +#469887 = VECTOR('',#469888,1.); +#469888 = DIRECTION('',(0.,1.,0.)); +#469889 = ORIENTED_EDGE('',*,*,#469890,.T.); +#469890 = EDGE_CURVE('',#469883,#469891,#469893,.T.); +#469891 = VERTEX_POINT('',#469892); +#469892 = CARTESIAN_POINT('',(132.02741,-135.275047,-7.5E-02)); +#469893 = LINE('',#469894,#469895); +#469894 = CARTESIAN_POINT('',(131.73932,-135.275047,-7.5E-02)); +#469895 = VECTOR('',#469896,1.); +#469896 = DIRECTION('',(1.,0.,0.)); +#469897 = ORIENTED_EDGE('',*,*,#469898,.T.); +#469898 = EDGE_CURVE('',#469891,#469899,#469901,.T.); +#469899 = VERTEX_POINT('',#469900); +#469900 = CARTESIAN_POINT('',(132.02741,-135.419092,-7.5E-02)); +#469901 = LINE('',#469902,#469903); +#469902 = CARTESIAN_POINT('',(132.02741,-135.275047,-7.5E-02)); +#469903 = VECTOR('',#469904,1.); +#469904 = DIRECTION('',(0.,-1.,0.)); +#469905 = ORIENTED_EDGE('',*,*,#469906,.T.); +#469906 = EDGE_CURVE('',#469899,#469907,#469909,.T.); +#469907 = VERTEX_POINT('',#469908); +#469908 = CARTESIAN_POINT('',(132.02741,-135.563138,-7.5E-02)); +#469909 = LINE('',#469910,#469911); +#469910 = CARTESIAN_POINT('',(132.02741,-135.419092,-7.5E-02)); +#469911 = VECTOR('',#469912,1.); +#469912 = DIRECTION('',(0.,-1.,0.)); +#469913 = ORIENTED_EDGE('',*,*,#469914,.T.); +#469914 = EDGE_CURVE('',#469907,#469881,#469915,.T.); +#469915 = LINE('',#469916,#469917); +#469916 = CARTESIAN_POINT('',(132.02741,-135.563138,-7.5E-02)); +#469917 = VECTOR('',#469918,1.); +#469918 = DIRECTION('',(-1.,0.,0.)); +#469919 = PLANE('',#469920); +#469920 = AXIS2_PLACEMENT_3D('',#469921,#469922,#469923); +#469921 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469922 = DIRECTION('',(-0.,-0.,-1.)); +#469923 = DIRECTION('',(-1.,0.,0.)); +#469924 = SHELL_BASED_SURFACE_MODEL('',(#469925)); +#469925 = OPEN_SHELL('',(#469926)); +#469926 = ADVANCED_FACE('',(#469927),#469969,.T.); +#469927 = FACE_BOUND('',#469928,.T.); +#469928 = EDGE_LOOP('',(#469929,#469939,#469947,#469955,#469963)); +#469929 = ORIENTED_EDGE('',*,*,#469930,.T.); +#469930 = EDGE_CURVE('',#469931,#469933,#469935,.T.); +#469931 = VERTEX_POINT('',#469932); +#469932 = CARTESIAN_POINT('',(138.941588,-135.563138,-7.5E-02)); +#469933 = VERTEX_POINT('',#469934); +#469934 = CARTESIAN_POINT('',(138.941588,-135.275047,-7.5E-02)); +#469935 = LINE('',#469936,#469937); +#469936 = CARTESIAN_POINT('',(138.941588,-135.563138,-7.5E-02)); +#469937 = VECTOR('',#469938,1.); +#469938 = DIRECTION('',(0.,1.,0.)); +#469939 = ORIENTED_EDGE('',*,*,#469940,.T.); +#469940 = EDGE_CURVE('',#469933,#469941,#469943,.T.); +#469941 = VERTEX_POINT('',#469942); +#469942 = CARTESIAN_POINT('',(139.229679,-135.275047,-7.5E-02)); +#469943 = LINE('',#469944,#469945); +#469944 = CARTESIAN_POINT('',(138.941588,-135.275047,-7.5E-02)); +#469945 = VECTOR('',#469946,1.); +#469946 = DIRECTION('',(1.,0.,0.)); +#469947 = ORIENTED_EDGE('',*,*,#469948,.T.); +#469948 = EDGE_CURVE('',#469941,#469949,#469951,.T.); +#469949 = VERTEX_POINT('',#469950); +#469950 = CARTESIAN_POINT('',(139.229679,-135.419092,-7.5E-02)); +#469951 = LINE('',#469952,#469953); +#469952 = CARTESIAN_POINT('',(139.229679,-135.275047,-7.5E-02)); +#469953 = VECTOR('',#469954,1.); +#469954 = DIRECTION('',(0.,-1.,0.)); +#469955 = ORIENTED_EDGE('',*,*,#469956,.T.); +#469956 = EDGE_CURVE('',#469949,#469957,#469959,.T.); +#469957 = VERTEX_POINT('',#469958); +#469958 = CARTESIAN_POINT('',(139.229679,-135.563138,-7.5E-02)); +#469959 = LINE('',#469960,#469961); +#469960 = CARTESIAN_POINT('',(139.229679,-135.419092,-7.5E-02)); +#469961 = VECTOR('',#469962,1.); +#469962 = DIRECTION('',(0.,-1.,0.)); +#469963 = ORIENTED_EDGE('',*,*,#469964,.T.); +#469964 = EDGE_CURVE('',#469957,#469931,#469965,.T.); +#469965 = LINE('',#469966,#469967); +#469966 = CARTESIAN_POINT('',(139.229679,-135.563138,-7.5E-02)); +#469967 = VECTOR('',#469968,1.); +#469968 = DIRECTION('',(-1.,0.,0.)); +#469969 = PLANE('',#469970); +#469970 = AXIS2_PLACEMENT_3D('',#469971,#469972,#469973); +#469971 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#469972 = DIRECTION('',(-0.,-0.,-1.)); +#469973 = DIRECTION('',(-1.,0.,0.)); +#469974 = SHELL_BASED_SURFACE_MODEL('',(#469975)); +#469975 = OPEN_SHELL('',(#469976)); +#469976 = ADVANCED_FACE('',(#469977),#470102,.T.); +#469977 = FACE_BOUND('',#469978,.T.); +#469978 = EDGE_LOOP('',(#469979,#469990,#469998,#470006,#470014,#470022, + #470031,#470039,#470047,#470055,#470063,#470072,#470080,#470088, + #470096)); +#469979 = ORIENTED_EDGE('',*,*,#469980,.T.); +#469980 = EDGE_CURVE('',#469981,#469983,#469985,.T.); +#469981 = VERTEX_POINT('',#469982); +#469982 = CARTESIAN_POINT('',(151.74587,-134.525418,-7.5E-02)); +#469983 = VERTEX_POINT('',#469984); +#469984 = CARTESIAN_POINT('',(151.812625,-134.475848,-7.5E-02)); +#469985 = CIRCLE('',#469986,5.000029997161E-02); +#469986 = AXIS2_PLACEMENT_3D('',#469987,#469988,#469989); +#469987 = CARTESIAN_POINT('',(151.79580863811,-134.5229355776,-7.5E-02) + ); +#469988 = DIRECTION('',(0.,0.,-1.)); +#469989 = DIRECTION('',(-0.998766770228,-4.96481488852E-02,-0.)); +#469990 = ORIENTED_EDGE('',*,*,#469991,.T.); +#469991 = EDGE_CURVE('',#469983,#469992,#469994,.T.); +#469992 = VERTEX_POINT('',#469993); +#469993 = CARTESIAN_POINT('',(152.461472,-134.707578,-7.5E-02)); +#469994 = LINE('',#469995,#469996); +#469995 = CARTESIAN_POINT('',(151.812625,-134.475848,-7.5E-02)); +#469996 = VECTOR('',#469997,1.); +#469997 = DIRECTION('',(0.941742404153,-0.336335017831,0.)); +#469998 = ORIENTED_EDGE('',*,*,#469999,.T.); +#469999 = EDGE_CURVE('',#469992,#470000,#470002,.T.); +#470000 = VERTEX_POINT('',#470001); +#470001 = CARTESIAN_POINT('',(152.672473,-134.623178,-7.5E-02)); +#470002 = LINE('',#470003,#470004); +#470003 = CARTESIAN_POINT('',(152.461472,-134.707578,-7.5E-02)); +#470004 = VECTOR('',#470005,1.); +#470005 = DIRECTION('',(0.928477297828,0.371389158993,0.)); +#470006 = ORIENTED_EDGE('',*,*,#470007,.T.); +#470007 = EDGE_CURVE('',#470000,#470008,#470010,.T.); +#470008 = VERTEX_POINT('',#470009); +#470009 = CARTESIAN_POINT('',(152.707096,-134.588554,-7.5E-02)); +#470010 = LINE('',#470011,#470012); +#470011 = CARTESIAN_POINT('',(152.672473,-134.623178,-7.5E-02)); +#470012 = VECTOR('',#470013,1.); +#470013 = DIRECTION('',(0.707096569742,0.707116992483,0.)); +#470014 = ORIENTED_EDGE('',*,*,#470015,.T.); +#470015 = EDGE_CURVE('',#470008,#470016,#470018,.T.); +#470016 = VERTEX_POINT('',#470017); +#470017 = CARTESIAN_POINT('',(152.751086,-134.500575,-7.5E-02)); +#470018 = LINE('',#470019,#470020); +#470019 = CARTESIAN_POINT('',(152.707096,-134.588554,-7.5E-02)); +#470020 = VECTOR('',#470021,1.); +#470021 = DIRECTION('',(0.447217662035,0.894425157721,0.)); +#470022 = ORIENTED_EDGE('',*,*,#470023,.T.); +#470023 = EDGE_CURVE('',#470016,#470024,#470026,.T.); +#470024 = VERTEX_POINT('',#470025); +#470025 = CARTESIAN_POINT('',(152.840529,-134.545296,-7.5E-02)); +#470026 = CIRCLE('',#470027,5.000004522571E-02); +#470027 = AXIS2_PLACEMENT_3D('',#470028,#470029,#470030); +#470028 = CARTESIAN_POINT('',(152.7958076196,-134.5229352607,-7.5E-02)); +#470029 = DIRECTION('',(0.,0.,-1.)); +#470030 = DIRECTION('',(-0.894431582967,0.447204811458,0.)); +#470031 = ORIENTED_EDGE('',*,*,#470032,.T.); +#470032 = EDGE_CURVE('',#470024,#470033,#470035,.T.); +#470033 = VERTEX_POINT('',#470034); +#470034 = CARTESIAN_POINT('',(152.783544,-134.653529,-7.5E-02)); +#470035 = LINE('',#470036,#470037); +#470036 = CARTESIAN_POINT('',(152.840529,-134.545296,-7.5E-02)); +#470037 = VECTOR('',#470038,1.); +#470038 = DIRECTION('',(-0.465876152725,-0.884849936612,0.)); +#470039 = ORIENTED_EDGE('',*,*,#470040,.T.); +#470040 = EDGE_CURVE('',#470033,#470041,#470043,.T.); +#470041 = VERTEX_POINT('',#470042); +#470042 = CARTESIAN_POINT('',(152.719704,-134.711986,-7.5E-02)); +#470043 = LINE('',#470044,#470045); +#470044 = CARTESIAN_POINT('',(152.783544,-134.653529,-7.5E-02)); +#470045 = VECTOR('',#470046,1.); +#470046 = DIRECTION('',(-0.737516567078,-0.675329040753,0.)); +#470047 = ORIENTED_EDGE('',*,*,#470048,.T.); +#470048 = EDGE_CURVE('',#470041,#470049,#470051,.T.); +#470049 = VERTEX_POINT('',#470050); +#470050 = CARTESIAN_POINT('',(152.479292,-134.808117,-7.5E-02)); +#470051 = LINE('',#470052,#470053); +#470052 = CARTESIAN_POINT('',(152.719704,-134.711986,-7.5E-02)); +#470053 = VECTOR('',#470054,1.); +#470054 = DIRECTION('',(-0.928521698792,-0.371278136809,0.)); +#470055 = ORIENTED_EDGE('',*,*,#470056,.T.); +#470056 = EDGE_CURVE('',#470049,#470057,#470059,.T.); +#470057 = VERTEX_POINT('',#470058); +#470058 = CARTESIAN_POINT('',(151.812625,-135.046212,-7.5E-02)); +#470059 = LINE('',#470060,#470061); +#470060 = CARTESIAN_POINT('',(152.479292,-134.808117,-7.5E-02)); +#470061 = VECTOR('',#470062,1.); +#470062 = DIRECTION('',(-0.941742071393,-0.336335949564,0.)); +#470063 = ORIENTED_EDGE('',*,*,#470064,.T.); +#470064 = EDGE_CURVE('',#470057,#470065,#470067,.T.); +#470065 = VERTEX_POINT('',#470066); +#470066 = CARTESIAN_POINT('',(151.778991,-134.952038,-7.5E-02)); +#470067 = CIRCLE('',#470068,4.999997058101E-02); +#470068 = AXIS2_PLACEMENT_3D('',#470069,#470070,#470071); +#470069 = CARTESIAN_POINT('',(151.79580830002,-134.9991248928,-7.5E-02) + ); +#470070 = DIRECTION('',(0.,0.,-1.)); +#470071 = DIRECTION('',(0.336334197457,-0.941742697142,0.)); +#470072 = ORIENTED_EDGE('',*,*,#470073,.T.); +#470073 = EDGE_CURVE('',#470065,#470074,#470076,.T.); +#470074 = VERTEX_POINT('',#470075); +#470075 = CARTESIAN_POINT('',(152.313814,-134.76103,-7.5E-02)); +#470076 = LINE('',#470077,#470078); +#470077 = CARTESIAN_POINT('',(151.778991,-134.952038,-7.5E-02)); +#470078 = VECTOR('',#470079,1.); +#470079 = DIRECTION('',(0.941742031109,0.336336062357,0.)); +#470080 = ORIENTED_EDGE('',*,*,#470081,.T.); +#470081 = EDGE_CURVE('',#470074,#470082,#470084,.T.); +#470082 = VERTEX_POINT('',#470083); +#470083 = CARTESIAN_POINT('',(151.778991,-134.570022,-7.5E-02)); +#470084 = LINE('',#470085,#470086); +#470085 = CARTESIAN_POINT('',(152.313814,-134.76103,-7.5E-02)); +#470086 = VECTOR('',#470087,1.); +#470087 = DIRECTION('',(-0.941742031109,0.336336062357,0.)); +#470088 = ORIENTED_EDGE('',*,*,#470089,.T.); +#470089 = EDGE_CURVE('',#470082,#470090,#470092,.T.); +#470090 = VERTEX_POINT('',#470091); +#470091 = CARTESIAN_POINT('',(151.762252,-134.560002,-7.5E-02)); +#470092 = LINE('',#470093,#470094); +#470093 = CARTESIAN_POINT('',(151.778991,-134.570022,-7.5E-02)); +#470094 = VECTOR('',#470095,1.); +#470095 = DIRECTION('',(-0.858021644251,0.513613529804,0.)); +#470096 = ORIENTED_EDGE('',*,*,#470097,.T.); +#470097 = EDGE_CURVE('',#470090,#469981,#470098,.T.); +#470098 = LINE('',#470099,#470100); +#470099 = CARTESIAN_POINT('',(151.762252,-134.560002,-7.5E-02)); +#470100 = VECTOR('',#470101,1.); +#470101 = DIRECTION('',(-0.42808859135,0.903736774706,0.)); +#470102 = PLANE('',#470103); +#470103 = AXIS2_PLACEMENT_3D('',#470104,#470105,#470106); +#470104 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470105 = DIRECTION('',(-0.,-0.,-1.)); +#470106 = DIRECTION('',(-1.,0.,0.)); +#470107 = SHELL_BASED_SURFACE_MODEL('',(#470108)); +#470108 = OPEN_SHELL('',(#470109)); +#470109 = ADVANCED_FACE('',(#470110),#470152,.T.); +#470110 = FACE_BOUND('',#470111,.T.); +#470111 = EDGE_LOOP('',(#470112,#470122,#470130,#470138,#470146)); +#470112 = ORIENTED_EDGE('',*,*,#470113,.T.); +#470113 = EDGE_CURVE('',#470114,#470116,#470118,.T.); +#470114 = VERTEX_POINT('',#470115); +#470115 = CARTESIAN_POINT('',(129.146503,-134.410775,-7.5E-02)); +#470116 = VERTEX_POINT('',#470117); +#470117 = CARTESIAN_POINT('',(129.146503,-133.546503,-7.5E-02)); +#470118 = LINE('',#470119,#470120); +#470119 = CARTESIAN_POINT('',(129.146503,-134.410775,-7.5E-02)); +#470120 = VECTOR('',#470121,1.); +#470121 = DIRECTION('',(0.,1.,0.)); +#470122 = ORIENTED_EDGE('',*,*,#470123,.T.); +#470123 = EDGE_CURVE('',#470116,#470124,#470126,.T.); +#470124 = VERTEX_POINT('',#470125); +#470125 = CARTESIAN_POINT('',(130.010775,-133.546503,-7.5E-02)); +#470126 = LINE('',#470127,#470128); +#470127 = CARTESIAN_POINT('',(129.146503,-133.546503,-7.5E-02)); +#470128 = VECTOR('',#470129,1.); +#470129 = DIRECTION('',(1.,0.,0.)); +#470130 = ORIENTED_EDGE('',*,*,#470131,.T.); +#470131 = EDGE_CURVE('',#470124,#470132,#470134,.T.); +#470132 = VERTEX_POINT('',#470133); +#470133 = CARTESIAN_POINT('',(130.010775,-133.978639,-7.5E-02)); +#470134 = LINE('',#470135,#470136); +#470135 = CARTESIAN_POINT('',(130.010775,-133.546503,-7.5E-02)); +#470136 = VECTOR('',#470137,1.); +#470137 = DIRECTION('',(0.,-1.,0.)); +#470138 = ORIENTED_EDGE('',*,*,#470139,.T.); +#470139 = EDGE_CURVE('',#470132,#470140,#470142,.T.); +#470140 = VERTEX_POINT('',#470141); +#470141 = CARTESIAN_POINT('',(130.010775,-134.410775,-7.5E-02)); +#470142 = LINE('',#470143,#470144); +#470143 = CARTESIAN_POINT('',(130.010775,-133.978639,-7.5E-02)); +#470144 = VECTOR('',#470145,1.); +#470145 = DIRECTION('',(0.,-1.,0.)); +#470146 = ORIENTED_EDGE('',*,*,#470147,.T.); +#470147 = EDGE_CURVE('',#470140,#470114,#470148,.T.); +#470148 = LINE('',#470149,#470150); +#470149 = CARTESIAN_POINT('',(130.010775,-134.410775,-7.5E-02)); +#470150 = VECTOR('',#470151,1.); +#470151 = DIRECTION('',(-1.,0.,0.)); +#470152 = PLANE('',#470153); +#470153 = AXIS2_PLACEMENT_3D('',#470154,#470155,#470156); +#470154 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470155 = DIRECTION('',(-0.,-0.,-1.)); +#470156 = DIRECTION('',(-1.,0.,0.)); +#470157 = SHELL_BASED_SURFACE_MODEL('',(#470158)); +#470158 = OPEN_SHELL('',(#470159)); +#470159 = ADVANCED_FACE('',(#470160,#470194),#470228,.T.); +#470160 = FACE_BOUND('',#470161,.T.); +#470161 = EDGE_LOOP('',(#470162,#470172,#470180,#470188)); +#470162 = ORIENTED_EDGE('',*,*,#470163,.T.); +#470163 = EDGE_CURVE('',#470164,#470166,#470168,.T.); +#470164 = VERTEX_POINT('',#470165); +#470165 = CARTESIAN_POINT('',(128.570322,-134.986956,-7.5E-02)); +#470166 = VERTEX_POINT('',#470167); +#470167 = CARTESIAN_POINT('',(128.570322,-132.970321,-7.5E-02)); +#470168 = LINE('',#470169,#470170); +#470169 = CARTESIAN_POINT('',(128.570322,-134.986956,-7.5E-02)); +#470170 = VECTOR('',#470171,1.); +#470171 = DIRECTION('',(0.,1.,0.)); +#470172 = ORIENTED_EDGE('',*,*,#470173,.T.); +#470173 = EDGE_CURVE('',#470166,#470174,#470176,.T.); +#470174 = VERTEX_POINT('',#470175); +#470175 = CARTESIAN_POINT('',(130.586957,-132.970321,-7.5E-02)); +#470176 = LINE('',#470177,#470178); +#470177 = CARTESIAN_POINT('',(128.570322,-132.970321,-7.5E-02)); +#470178 = VECTOR('',#470179,1.); +#470179 = DIRECTION('',(1.,0.,0.)); +#470180 = ORIENTED_EDGE('',*,*,#470181,.T.); +#470181 = EDGE_CURVE('',#470174,#470182,#470184,.T.); +#470182 = VERTEX_POINT('',#470183); +#470183 = CARTESIAN_POINT('',(130.586957,-134.986956,-7.5E-02)); +#470184 = LINE('',#470185,#470186); +#470185 = CARTESIAN_POINT('',(130.586957,-132.970321,-7.5E-02)); +#470186 = VECTOR('',#470187,1.); +#470187 = DIRECTION('',(0.,-1.,0.)); +#470188 = ORIENTED_EDGE('',*,*,#470189,.T.); +#470189 = EDGE_CURVE('',#470182,#470164,#470190,.T.); +#470190 = LINE('',#470191,#470192); +#470191 = CARTESIAN_POINT('',(130.586957,-134.986956,-7.5E-02)); +#470192 = VECTOR('',#470193,1.); +#470193 = DIRECTION('',(-1.,0.,0.)); +#470194 = FACE_BOUND('',#470195,.T.); +#470195 = EDGE_LOOP('',(#470196,#470206,#470214,#470222)); +#470196 = ORIENTED_EDGE('',*,*,#470197,.T.); +#470197 = EDGE_CURVE('',#470198,#470200,#470202,.T.); +#470198 = VERTEX_POINT('',#470199); +#470199 = CARTESIAN_POINT('',(130.298866,-134.698866,-7.5E-02)); +#470200 = VERTEX_POINT('',#470201); +#470201 = CARTESIAN_POINT('',(130.298866,-133.258412,-7.5E-02)); +#470202 = LINE('',#470203,#470204); +#470203 = CARTESIAN_POINT('',(130.298866,-134.698866,-7.5E-02)); +#470204 = VECTOR('',#470205,1.); +#470205 = DIRECTION('',(0.,1.,0.)); +#470206 = ORIENTED_EDGE('',*,*,#470207,.T.); +#470207 = EDGE_CURVE('',#470200,#470208,#470210,.T.); +#470208 = VERTEX_POINT('',#470209); +#470209 = CARTESIAN_POINT('',(128.858412,-133.258412,-7.5E-02)); +#470210 = LINE('',#470211,#470212); +#470211 = CARTESIAN_POINT('',(130.298866,-133.258412,-7.5E-02)); +#470212 = VECTOR('',#470213,1.); +#470213 = DIRECTION('',(-1.,0.,0.)); +#470214 = ORIENTED_EDGE('',*,*,#470215,.T.); +#470215 = EDGE_CURVE('',#470208,#470216,#470218,.T.); +#470216 = VERTEX_POINT('',#470217); +#470217 = CARTESIAN_POINT('',(128.858412,-134.698866,-7.5E-02)); +#470218 = LINE('',#470219,#470220); +#470219 = CARTESIAN_POINT('',(128.858412,-133.258412,-7.5E-02)); +#470220 = VECTOR('',#470221,1.); +#470221 = DIRECTION('',(0.,-1.,0.)); +#470222 = ORIENTED_EDGE('',*,*,#470223,.T.); +#470223 = EDGE_CURVE('',#470216,#470198,#470224,.T.); +#470224 = LINE('',#470225,#470226); +#470225 = CARTESIAN_POINT('',(128.858412,-134.698866,-7.5E-02)); +#470226 = VECTOR('',#470227,1.); +#470227 = DIRECTION('',(1.,0.,0.)); +#470228 = PLANE('',#470229); +#470229 = AXIS2_PLACEMENT_3D('',#470230,#470231,#470232); +#470230 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470231 = DIRECTION('',(-0.,-0.,-1.)); +#470232 = DIRECTION('',(-1.,0.,0.)); +#470233 = SHELL_BASED_SURFACE_MODEL('',(#470234)); +#470234 = OPEN_SHELL('',(#470235)); +#470235 = ADVANCED_FACE('',(#470236),#470278,.T.); +#470236 = FACE_BOUND('',#470237,.T.); +#470237 = EDGE_LOOP('',(#470238,#470248,#470256,#470264,#470272)); +#470238 = ORIENTED_EDGE('',*,*,#470239,.T.); +#470239 = EDGE_CURVE('',#470240,#470242,#470244,.T.); +#470240 = VERTEX_POINT('',#470241); +#470241 = CARTESIAN_POINT('',(137.789225,-134.410775,-7.5E-02)); +#470242 = VERTEX_POINT('',#470243); +#470243 = CARTESIAN_POINT('',(137.789225,-133.546503,-7.5E-02)); +#470244 = LINE('',#470245,#470246); +#470245 = CARTESIAN_POINT('',(137.789225,-134.410775,-7.5E-02)); +#470246 = VECTOR('',#470247,1.); +#470247 = DIRECTION('',(0.,1.,0.)); +#470248 = ORIENTED_EDGE('',*,*,#470249,.T.); +#470249 = EDGE_CURVE('',#470242,#470250,#470252,.T.); +#470250 = VERTEX_POINT('',#470251); +#470251 = CARTESIAN_POINT('',(138.653497,-133.546503,-7.5E-02)); +#470252 = LINE('',#470253,#470254); +#470253 = CARTESIAN_POINT('',(137.789225,-133.546503,-7.5E-02)); +#470254 = VECTOR('',#470255,1.); +#470255 = DIRECTION('',(1.,0.,0.)); +#470256 = ORIENTED_EDGE('',*,*,#470257,.T.); +#470257 = EDGE_CURVE('',#470250,#470258,#470260,.T.); +#470258 = VERTEX_POINT('',#470259); +#470259 = CARTESIAN_POINT('',(138.653497,-133.978639,-7.5E-02)); +#470260 = LINE('',#470261,#470262); +#470261 = CARTESIAN_POINT('',(138.653497,-133.546503,-7.5E-02)); +#470262 = VECTOR('',#470263,1.); +#470263 = DIRECTION('',(0.,-1.,0.)); +#470264 = ORIENTED_EDGE('',*,*,#470265,.T.); +#470265 = EDGE_CURVE('',#470258,#470266,#470268,.T.); +#470266 = VERTEX_POINT('',#470267); +#470267 = CARTESIAN_POINT('',(138.653497,-134.410775,-7.5E-02)); +#470268 = LINE('',#470269,#470270); +#470269 = CARTESIAN_POINT('',(138.653497,-133.978639,-7.5E-02)); +#470270 = VECTOR('',#470271,1.); +#470271 = DIRECTION('',(0.,-1.,0.)); +#470272 = ORIENTED_EDGE('',*,*,#470273,.T.); +#470273 = EDGE_CURVE('',#470266,#470240,#470274,.T.); +#470274 = LINE('',#470275,#470276); +#470275 = CARTESIAN_POINT('',(138.653497,-134.410775,-7.5E-02)); +#470276 = VECTOR('',#470277,1.); +#470277 = DIRECTION('',(-1.,0.,0.)); +#470278 = PLANE('',#470279); +#470279 = AXIS2_PLACEMENT_3D('',#470280,#470281,#470282); +#470280 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470281 = DIRECTION('',(-0.,-0.,-1.)); +#470282 = DIRECTION('',(-1.,0.,0.)); +#470283 = SHELL_BASED_SURFACE_MODEL('',(#470284)); +#470284 = OPEN_SHELL('',(#470285)); +#470285 = ADVANCED_FACE('',(#470286,#470320),#470354,.T.); +#470286 = FACE_BOUND('',#470287,.T.); +#470287 = EDGE_LOOP('',(#470288,#470298,#470306,#470314)); +#470288 = ORIENTED_EDGE('',*,*,#470289,.T.); +#470289 = EDGE_CURVE('',#470290,#470292,#470294,.T.); +#470290 = VERTEX_POINT('',#470291); +#470291 = CARTESIAN_POINT('',(137.213044,-134.986956,-7.5E-02)); +#470292 = VERTEX_POINT('',#470293); +#470293 = CARTESIAN_POINT('',(137.213044,-132.970321,-7.5E-02)); +#470294 = LINE('',#470295,#470296); +#470295 = CARTESIAN_POINT('',(137.213044,-134.986956,-7.5E-02)); +#470296 = VECTOR('',#470297,1.); +#470297 = DIRECTION('',(0.,1.,0.)); +#470298 = ORIENTED_EDGE('',*,*,#470299,.T.); +#470299 = EDGE_CURVE('',#470292,#470300,#470302,.T.); +#470300 = VERTEX_POINT('',#470301); +#470301 = CARTESIAN_POINT('',(139.229679,-132.970321,-7.5E-02)); +#470302 = LINE('',#470303,#470304); +#470303 = CARTESIAN_POINT('',(137.213044,-132.970321,-7.5E-02)); +#470304 = VECTOR('',#470305,1.); +#470305 = DIRECTION('',(1.,0.,0.)); +#470306 = ORIENTED_EDGE('',*,*,#470307,.T.); +#470307 = EDGE_CURVE('',#470300,#470308,#470310,.T.); +#470308 = VERTEX_POINT('',#470309); +#470309 = CARTESIAN_POINT('',(139.229679,-134.986956,-7.5E-02)); +#470310 = LINE('',#470311,#470312); +#470311 = CARTESIAN_POINT('',(139.229679,-132.970321,-7.5E-02)); +#470312 = VECTOR('',#470313,1.); +#470313 = DIRECTION('',(0.,-1.,0.)); +#470314 = ORIENTED_EDGE('',*,*,#470315,.T.); +#470315 = EDGE_CURVE('',#470308,#470290,#470316,.T.); +#470316 = LINE('',#470317,#470318); +#470317 = CARTESIAN_POINT('',(139.229679,-134.986956,-7.5E-02)); +#470318 = VECTOR('',#470319,1.); +#470319 = DIRECTION('',(-1.,0.,0.)); +#470320 = FACE_BOUND('',#470321,.T.); +#470321 = EDGE_LOOP('',(#470322,#470332,#470340,#470348)); +#470322 = ORIENTED_EDGE('',*,*,#470323,.T.); +#470323 = EDGE_CURVE('',#470324,#470326,#470328,.T.); +#470324 = VERTEX_POINT('',#470325); +#470325 = CARTESIAN_POINT('',(138.941588,-134.698866,-7.5E-02)); +#470326 = VERTEX_POINT('',#470327); +#470327 = CARTESIAN_POINT('',(138.941588,-133.258412,-7.5E-02)); +#470328 = LINE('',#470329,#470330); +#470329 = CARTESIAN_POINT('',(138.941588,-134.698866,-7.5E-02)); +#470330 = VECTOR('',#470331,1.); +#470331 = DIRECTION('',(0.,1.,0.)); +#470332 = ORIENTED_EDGE('',*,*,#470333,.T.); +#470333 = EDGE_CURVE('',#470326,#470334,#470336,.T.); +#470334 = VERTEX_POINT('',#470335); +#470335 = CARTESIAN_POINT('',(137.501134,-133.258412,-7.5E-02)); +#470336 = LINE('',#470337,#470338); +#470337 = CARTESIAN_POINT('',(138.941588,-133.258412,-7.5E-02)); +#470338 = VECTOR('',#470339,1.); +#470339 = DIRECTION('',(-1.,0.,0.)); +#470340 = ORIENTED_EDGE('',*,*,#470341,.T.); +#470341 = EDGE_CURVE('',#470334,#470342,#470344,.T.); +#470342 = VERTEX_POINT('',#470343); +#470343 = CARTESIAN_POINT('',(137.501134,-134.698866,-7.5E-02)); +#470344 = LINE('',#470345,#470346); +#470345 = CARTESIAN_POINT('',(137.501134,-133.258412,-7.5E-02)); +#470346 = VECTOR('',#470347,1.); +#470347 = DIRECTION('',(0.,-1.,0.)); +#470348 = ORIENTED_EDGE('',*,*,#470349,.T.); +#470349 = EDGE_CURVE('',#470342,#470324,#470350,.T.); +#470350 = LINE('',#470351,#470352); +#470351 = CARTESIAN_POINT('',(137.501134,-134.698866,-7.5E-02)); +#470352 = VECTOR('',#470353,1.); +#470353 = DIRECTION('',(1.,0.,0.)); +#470354 = PLANE('',#470355); +#470355 = AXIS2_PLACEMENT_3D('',#470356,#470357,#470358); +#470356 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470357 = DIRECTION('',(-0.,-0.,-1.)); +#470358 = DIRECTION('',(-1.,0.,0.)); +#470359 = SHELL_BASED_SURFACE_MODEL('',(#470360)); +#470360 = OPEN_SHELL('',(#470361)); +#470361 = ADVANCED_FACE('',(#470362),#470404,.T.); +#470362 = FACE_BOUND('',#470363,.T.); +#470363 = EDGE_LOOP('',(#470364,#470374,#470382,#470390,#470398)); +#470364 = ORIENTED_EDGE('',*,*,#470365,.T.); +#470365 = EDGE_CURVE('',#470366,#470368,#470370,.T.); +#470366 = VERTEX_POINT('',#470367); +#470367 = CARTESIAN_POINT('',(132.315501,-134.410775,-7.5E-02)); +#470368 = VERTEX_POINT('',#470369); +#470369 = CARTESIAN_POINT('',(132.315501,-134.122684,-7.5E-02)); +#470370 = LINE('',#470371,#470372); +#470371 = CARTESIAN_POINT('',(132.315501,-134.410775,-7.5E-02)); +#470372 = VECTOR('',#470373,1.); +#470373 = DIRECTION('',(0.,1.,0.)); +#470374 = ORIENTED_EDGE('',*,*,#470375,.T.); +#470375 = EDGE_CURVE('',#470368,#470376,#470378,.T.); +#470376 = VERTEX_POINT('',#470377); +#470377 = CARTESIAN_POINT('',(132.603592,-134.122684,-7.5E-02)); +#470378 = LINE('',#470379,#470380); +#470379 = CARTESIAN_POINT('',(132.315501,-134.122684,-7.5E-02)); +#470380 = VECTOR('',#470381,1.); +#470381 = DIRECTION('',(1.,0.,0.)); +#470382 = ORIENTED_EDGE('',*,*,#470383,.T.); +#470383 = EDGE_CURVE('',#470376,#470384,#470386,.T.); +#470384 = VERTEX_POINT('',#470385); +#470385 = CARTESIAN_POINT('',(132.603592,-134.26673,-7.5E-02)); +#470386 = LINE('',#470387,#470388); +#470387 = CARTESIAN_POINT('',(132.603592,-134.122684,-7.5E-02)); +#470388 = VECTOR('',#470389,1.); +#470389 = DIRECTION('',(0.,-1.,0.)); +#470390 = ORIENTED_EDGE('',*,*,#470391,.T.); +#470391 = EDGE_CURVE('',#470384,#470392,#470394,.T.); +#470392 = VERTEX_POINT('',#470393); +#470393 = CARTESIAN_POINT('',(132.603592,-134.410775,-7.5E-02)); +#470394 = LINE('',#470395,#470396); +#470395 = CARTESIAN_POINT('',(132.603592,-134.26673,-7.5E-02)); +#470396 = VECTOR('',#470397,1.); +#470397 = DIRECTION('',(0.,-1.,0.)); +#470398 = ORIENTED_EDGE('',*,*,#470399,.T.); +#470399 = EDGE_CURVE('',#470392,#470366,#470400,.T.); +#470400 = LINE('',#470401,#470402); +#470401 = CARTESIAN_POINT('',(132.603592,-134.410775,-7.5E-02)); +#470402 = VECTOR('',#470403,1.); +#470403 = DIRECTION('',(-1.,0.,0.)); +#470404 = PLANE('',#470405); +#470405 = AXIS2_PLACEMENT_3D('',#470406,#470407,#470408); +#470406 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470407 = DIRECTION('',(-0.,-0.,-1.)); +#470408 = DIRECTION('',(-1.,0.,0.)); +#470409 = SHELL_BASED_SURFACE_MODEL('',(#470410)); +#470410 = OPEN_SHELL('',(#470411)); +#470411 = ADVANCED_FACE('',(#470412,#470489),#470566,.T.); +#470412 = FACE_BOUND('',#470413,.T.); +#470413 = EDGE_LOOP('',(#470414,#470425,#470433,#470441,#470449,#470458, + #470466,#470474,#470483)); +#470414 = ORIENTED_EDGE('',*,*,#470415,.T.); +#470415 = EDGE_CURVE('',#470416,#470418,#470420,.T.); +#470416 = VERTEX_POINT('',#470417); +#470417 = CARTESIAN_POINT('',(153.408649,-134.259578,-7.5E-02)); +#470418 = VERTEX_POINT('',#470419); +#470419 = CARTESIAN_POINT('',(153.584955,-133.760889,-7.5E-02)); +#470420 = CIRCLE('',#470421,0.320678184363); +#470421 = AXIS2_PLACEMENT_3D('',#470422,#470423,#470424); +#470422 = CARTESIAN_POINT('',(153.66778910741,-134.0706841074,-7.5E-02) + ); +#470423 = DIRECTION('',(0.,0.,-1.)); +#470424 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#470425 = ORIENTED_EDGE('',*,*,#470426,.T.); +#470426 = EDGE_CURVE('',#470418,#470427,#470429,.T.); +#470427 = VERTEX_POINT('',#470428); +#470428 = CARTESIAN_POINT('',(153.884398,-133.759135,-7.5E-02)); +#470429 = LINE('',#470430,#470431); +#470430 = CARTESIAN_POINT('',(153.584955,-133.760889,-7.5E-02)); +#470431 = VECTOR('',#470432,1.); +#470432 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#470433 = ORIENTED_EDGE('',*,*,#470434,.T.); +#470434 = EDGE_CURVE('',#470427,#470435,#470437,.T.); +#470435 = VERTEX_POINT('',#470436); +#470436 = CARTESIAN_POINT('',(153.904303,-133.763926,-7.5E-02)); +#470437 = LINE('',#470438,#470439); +#470438 = CARTESIAN_POINT('',(153.884398,-133.759135,-7.5E-02)); +#470439 = VECTOR('',#470440,1.); +#470440 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#470441 = ORIENTED_EDGE('',*,*,#470442,.T.); +#470442 = EDGE_CURVE('',#470435,#470443,#470445,.T.); +#470443 = VERTEX_POINT('',#470444); +#470444 = CARTESIAN_POINT('',(154.012535,-133.82091,-7.5E-02)); +#470445 = LINE('',#470446,#470447); +#470446 = CARTESIAN_POINT('',(153.904303,-133.763926,-7.5E-02)); +#470447 = VECTOR('',#470448,1.); +#470448 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#470449 = ORIENTED_EDGE('',*,*,#470450,.T.); +#470450 = EDGE_CURVE('',#470443,#470451,#470453,.T.); +#470451 = VERTEX_POINT('',#470452); +#470452 = CARTESIAN_POINT('',(154.120176,-134.153252,-7.5E-02)); +#470453 = CIRCLE('',#470454,0.323553911777); +#470454 = AXIS2_PLACEMENT_3D('',#470455,#470456,#470457); +#470455 = CARTESIAN_POINT('',(153.80725115022,-134.071001333,-7.5E-02)); +#470456 = DIRECTION('',(0.,0.,-1.)); +#470457 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#470458 = ORIENTED_EDGE('',*,*,#470459,.T.); +#470459 = EDGE_CURVE('',#470451,#470460,#470462,.T.); +#470460 = VERTEX_POINT('',#470461); +#470461 = CARTESIAN_POINT('',(154.060155,-134.272574,-7.5E-02)); +#470462 = LINE('',#470463,#470464); +#470463 = CARTESIAN_POINT('',(154.120176,-134.153252,-7.5E-02)); +#470464 = VECTOR('',#470465,1.); +#470465 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#470466 = ORIENTED_EDGE('',*,*,#470467,.T.); +#470467 = EDGE_CURVE('',#470460,#470468,#470470,.T.); +#470468 = VERTEX_POINT('',#470469); +#470469 = CARTESIAN_POINT('',(153.99954,-134.329559,-7.5E-02)); +#470470 = LINE('',#470471,#470472); +#470471 = CARTESIAN_POINT('',(154.060155,-134.272574,-7.5E-02)); +#470472 = VECTOR('',#470473,1.); +#470473 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#470474 = ORIENTED_EDGE('',*,*,#470475,.T.); +#470475 = EDGE_CURVE('',#470468,#470476,#470478,.T.); +#470476 = VERTEX_POINT('',#470477); +#470477 = CARTESIAN_POINT('',(153.465634,-134.320192,-7.5E-02)); +#470478 = CIRCLE('',#470479,0.484201554455); +#470479 = AXIS2_PLACEMENT_3D('',#470480,#470481,#470482); +#470480 = CARTESIAN_POINT('',(153.73967270064,-133.921000397,-7.5E-02)); +#470481 = DIRECTION('',(-0.,0.,-1.)); +#470482 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#470483 = ORIENTED_EDGE('',*,*,#470484,.T.); +#470484 = EDGE_CURVE('',#470476,#470416,#470485,.T.); +#470485 = LINE('',#470486,#470487); +#470486 = CARTESIAN_POINT('',(153.465634,-134.320192,-7.5E-02)); +#470487 = VECTOR('',#470488,1.); +#470488 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#470489 = FACE_BOUND('',#470490,.T.); +#470490 = EDGE_LOOP('',(#470491,#470502,#470510,#470519,#470527,#470535, + #470544,#470552,#470560)); +#470491 = ORIENTED_EDGE('',*,*,#470492,.T.); +#470492 = EDGE_CURVE('',#470493,#470495,#470497,.T.); +#470493 = VERTEX_POINT('',#470494); +#470494 = CARTESIAN_POINT('',(153.947561,-133.897358,-7.5E-02)); +#470495 = VERTEX_POINT('',#470496); +#470496 = CARTESIAN_POINT('',(153.530608,-133.897358,-7.5E-02)); +#470497 = CIRCLE('',#470498,0.382072162856); +#470498 = AXIS2_PLACEMENT_3D('',#470499,#470500,#470501); +#470499 = CARTESIAN_POINT('',(153.7390845,-134.2175402708,-7.5E-02)); +#470500 = DIRECTION('',(0.,0.,1.)); +#470501 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#470502 = ORIENTED_EDGE('',*,*,#470503,.T.); +#470503 = EDGE_CURVE('',#470495,#470504,#470506,.T.); +#470504 = VERTEX_POINT('',#470505); +#470505 = CARTESIAN_POINT('',(153.494463,-133.933502,-7.5E-02)); +#470506 = LINE('',#470507,#470508); +#470507 = CARTESIAN_POINT('',(153.530608,-133.897358,-7.5E-02)); +#470508 = VECTOR('',#470509,1.); +#470509 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#470510 = ORIENTED_EDGE('',*,*,#470511,.T.); +#470511 = EDGE_CURVE('',#470504,#470512,#470514,.T.); +#470512 = VERTEX_POINT('',#470513); +#470513 = CARTESIAN_POINT('',(153.530608,-134.243744,-7.5E-02)); +#470514 = CIRCLE('',#470515,0.222710800783); +#470515 = AXIS2_PLACEMENT_3D('',#470516,#470517,#470518); +#470516 = CARTESIAN_POINT('',(153.67024834013,-134.0702485355,-7.5E-02) + ); +#470517 = DIRECTION('',(0.,0.,1.)); +#470518 = DIRECTION('',(-0.789298675759,0.614009446543,0.)); +#470519 = ORIENTED_EDGE('',*,*,#470520,.T.); +#470520 = EDGE_CURVE('',#470512,#470521,#470523,.T.); +#470521 = VERTEX_POINT('',#470522); +#470522 = CARTESIAN_POINT('',(153.608032,-134.282456,-7.5E-02)); +#470523 = LINE('',#470524,#470525); +#470524 = CARTESIAN_POINT('',(153.530608,-134.243744,-7.5E-02)); +#470525 = VECTOR('',#470526,1.); +#470526 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#470527 = ORIENTED_EDGE('',*,*,#470528,.T.); +#470528 = EDGE_CURVE('',#470521,#470529,#470531,.T.); +#470529 = VERTEX_POINT('',#470530); +#470530 = CARTESIAN_POINT('',(153.870139,-134.282456,-7.5E-02)); +#470531 = LINE('',#470532,#470533); +#470532 = CARTESIAN_POINT('',(153.608032,-134.282456,-7.5E-02)); +#470533 = VECTOR('',#470534,1.); +#470534 = DIRECTION('',(1.,0.,0.)); +#470535 = ORIENTED_EDGE('',*,*,#470536,.T.); +#470536 = EDGE_CURVE('',#470529,#470537,#470539,.T.); +#470537 = VERTEX_POINT('',#470538); +#470538 = CARTESIAN_POINT('',(154.022419,-134.130176,-7.5E-02)); +#470539 = CIRCLE('',#470540,0.215072998571); +#470540 = AXIS2_PLACEMENT_3D('',#470541,#470542,#470543); +#470541 = CARTESIAN_POINT('',(153.81463213236,-134.0746691323,-7.5E-02) + ); +#470542 = DIRECTION('',(0.,0.,1.)); +#470543 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#470544 = ORIENTED_EDGE('',*,*,#470545,.T.); +#470545 = EDGE_CURVE('',#470537,#470546,#470548,.T.); +#470546 = VERTEX_POINT('',#470547); +#470547 = CARTESIAN_POINT('',(154.022419,-134.010926,-7.5E-02)); +#470548 = LINE('',#470549,#470550); +#470549 = CARTESIAN_POINT('',(154.022419,-134.130176,-7.5E-02)); +#470550 = VECTOR('',#470551,1.); +#470551 = DIRECTION('',(0.,1.,0.)); +#470552 = ORIENTED_EDGE('',*,*,#470553,.T.); +#470553 = EDGE_CURVE('',#470546,#470554,#470556,.T.); +#470554 = VERTEX_POINT('',#470555); +#470555 = CARTESIAN_POINT('',(153.983708,-133.933504,-7.5E-02)); +#470556 = LINE('',#470557,#470558); +#470557 = CARTESIAN_POINT('',(154.022419,-134.010926,-7.5E-02)); +#470558 = VECTOR('',#470559,1.); +#470559 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#470560 = ORIENTED_EDGE('',*,*,#470561,.T.); +#470561 = EDGE_CURVE('',#470554,#470493,#470562,.T.); +#470562 = LINE('',#470563,#470564); +#470563 = CARTESIAN_POINT('',(153.983708,-133.933504,-7.5E-02)); +#470564 = VECTOR('',#470565,1.); +#470565 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#470566 = PLANE('',#470567); +#470567 = AXIS2_PLACEMENT_3D('',#470568,#470569,#470570); +#470568 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470569 = DIRECTION('',(-0.,-0.,-1.)); +#470570 = DIRECTION('',(-1.,0.,0.)); +#470571 = SHELL_BASED_SURFACE_MODEL('',(#470572)); +#470572 = OPEN_SHELL('',(#470573)); +#470573 = ADVANCED_FACE('',(#470574,#470691),#470759,.T.); +#470574 = FACE_BOUND('',#470575,.T.); +#470575 = EDGE_LOOP('',(#470576,#470587,#470595,#470604,#470612,#470620, + #470628,#470636,#470644,#470653,#470661,#470669,#470677,#470685)); +#470576 = ORIENTED_EDGE('',*,*,#470577,.T.); +#470577 = EDGE_CURVE('',#470578,#470580,#470582,.T.); +#470578 = VERTEX_POINT('',#470579); +#470579 = CARTESIAN_POINT('',(151.462475,-133.763411,-7.5E-02)); +#470580 = VERTEX_POINT('',#470581); +#470581 = CARTESIAN_POINT('',(151.462475,-133.663411,-7.5E-02)); +#470582 = CIRCLE('',#470583,5.000000000002E-02); +#470583 = AXIS2_PLACEMENT_3D('',#470584,#470585,#470586); +#470584 = CARTESIAN_POINT('',(151.46247504771,-133.713411,-7.5E-02)); +#470585 = DIRECTION('',(0.,0.,-1.)); +#470586 = DIRECTION('',(-9.542361567576E-07,-1.,-0.)); +#470587 = ORIENTED_EDGE('',*,*,#470588,.T.); +#470588 = EDGE_CURVE('',#470580,#470589,#470591,.T.); +#470589 = VERTEX_POINT('',#470590); +#470590 = CARTESIAN_POINT('',(152.462475,-133.663411,-7.5E-02)); +#470591 = LINE('',#470592,#470593); +#470592 = CARTESIAN_POINT('',(151.462475,-133.663411,-7.5E-02)); +#470593 = VECTOR('',#470594,1.); +#470594 = DIRECTION('',(1.,0.,0.)); +#470595 = ORIENTED_EDGE('',*,*,#470596,.T.); +#470596 = EDGE_CURVE('',#470589,#470597,#470599,.T.); +#470597 = VERTEX_POINT('',#470598); +#470598 = CARTESIAN_POINT('',(152.508669,-133.732545,-7.5E-02)); +#470599 = CIRCLE('',#470600,5.000005199709E-02); +#470600 = AXIS2_PLACEMENT_3D('',#470601,#470602,#470603); +#470601 = CARTESIAN_POINT('',(152.46247487447,-133.7134110519,-7.5E-02) + ); +#470602 = DIRECTION('',(0.,0.,-1.)); +#470603 = DIRECTION('',(2.51060749115E-06,0.999999999997,0.)); +#470604 = ORIENTED_EDGE('',*,*,#470605,.T.); +#470605 = EDGE_CURVE('',#470597,#470606,#470608,.T.); +#470606 = VERTEX_POINT('',#470607); +#470607 = CARTESIAN_POINT('',(152.489772,-133.751441,-7.5E-02)); +#470608 = LINE('',#470609,#470610); +#470609 = CARTESIAN_POINT('',(152.508669,-133.732545,-7.5E-02)); +#470610 = VECTOR('',#470611,1.); +#470611 = DIRECTION('',(-0.707125490932,-0.707088070946,0.)); +#470612 = ORIENTED_EDGE('',*,*,#470613,.T.); +#470613 = EDGE_CURVE('',#470606,#470614,#470616,.T.); +#470614 = VERTEX_POINT('',#470615); +#470615 = CARTESIAN_POINT('',(152.512349,-133.805104,-7.5E-02)); +#470616 = LINE('',#470617,#470618); +#470617 = CARTESIAN_POINT('',(152.489772,-133.751441,-7.5E-02)); +#470618 = VECTOR('',#470619,1.); +#470619 = DIRECTION('',(0.387795132833,-0.92174559123,0.)); +#470620 = ORIENTED_EDGE('',*,*,#470621,.T.); +#470621 = EDGE_CURVE('',#470614,#470622,#470624,.T.); +#470622 = VERTEX_POINT('',#470623); +#470623 = CARTESIAN_POINT('',(152.510232,-134.010397,-7.5E-02)); +#470624 = LINE('',#470625,#470626); +#470625 = CARTESIAN_POINT('',(152.512349,-133.805104,-7.5E-02)); +#470626 = VECTOR('',#470627,1.); +#470627 = DIRECTION('',(-1.031154227821E-02,-0.999946834635,0.)); +#470628 = ORIENTED_EDGE('',*,*,#470629,.T.); +#470629 = EDGE_CURVE('',#470622,#470630,#470632,.T.); +#470630 = VERTEX_POINT('',#470631); +#470631 = CARTESIAN_POINT('',(152.450211,-134.129719,-7.5E-02)); +#470632 = LINE('',#470633,#470634); +#470633 = CARTESIAN_POINT('',(152.510232,-134.010397,-7.5E-02)); +#470634 = VECTOR('',#470635,1.); +#470635 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#470636 = ORIENTED_EDGE('',*,*,#470637,.T.); +#470637 = EDGE_CURVE('',#470630,#470638,#470640,.T.); +#470638 = VERTEX_POINT('',#470639); +#470639 = CARTESIAN_POINT('',(152.389596,-134.186704,-7.5E-02)); +#470640 = LINE('',#470641,#470642); +#470641 = CARTESIAN_POINT('',(152.450211,-134.129719,-7.5E-02)); +#470642 = VECTOR('',#470643,1.); +#470643 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#470644 = ORIENTED_EDGE('',*,*,#470645,.T.); +#470645 = EDGE_CURVE('',#470638,#470646,#470648,.T.); +#470646 = VERTEX_POINT('',#470647); +#470647 = CARTESIAN_POINT('',(151.85569,-134.177337,-7.5E-02)); +#470648 = CIRCLE('',#470649,0.484201554455); +#470649 = AXIS2_PLACEMENT_3D('',#470650,#470651,#470652); +#470650 = CARTESIAN_POINT('',(152.12972870064,-133.778145397,-7.5E-02)); +#470651 = DIRECTION('',(-0.,0.,-1.)); +#470652 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#470653 = ORIENTED_EDGE('',*,*,#470654,.T.); +#470654 = EDGE_CURVE('',#470646,#470655,#470657,.T.); +#470655 = VERTEX_POINT('',#470656); +#470656 = CARTESIAN_POINT('',(151.798705,-134.116723,-7.5E-02)); +#470657 = LINE('',#470658,#470659); +#470658 = CARTESIAN_POINT('',(151.85569,-134.177337,-7.5E-02)); +#470659 = VECTOR('',#470660,1.); +#470660 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#470661 = ORIENTED_EDGE('',*,*,#470662,.T.); +#470662 = EDGE_CURVE('',#470655,#470663,#470665,.T.); +#470663 = VERTEX_POINT('',#470664); +#470664 = CARTESIAN_POINT('',(151.74805,-134.010397,-7.5E-02)); +#470665 = LINE('',#470666,#470667); +#470666 = CARTESIAN_POINT('',(151.798705,-134.116723,-7.5E-02)); +#470667 = VECTOR('',#470668,1.); +#470668 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#470669 = ORIENTED_EDGE('',*,*,#470670,.T.); +#470670 = EDGE_CURVE('',#470663,#470671,#470673,.T.); +#470671 = VERTEX_POINT('',#470672); +#470672 = CARTESIAN_POINT('',(151.74805,-133.797376,-7.5E-02)); +#470673 = LINE('',#470674,#470675); +#470674 = CARTESIAN_POINT('',(151.74805,-134.010397,-7.5E-02)); +#470675 = VECTOR('',#470676,1.); +#470676 = DIRECTION('',(0.,1.,0.)); +#470677 = ORIENTED_EDGE('',*,*,#470678,.T.); +#470678 = EDGE_CURVE('',#470671,#470679,#470681,.T.); +#470679 = VERTEX_POINT('',#470680); +#470680 = CARTESIAN_POINT('',(151.762525,-133.763411,-7.5E-02)); +#470681 = LINE('',#470682,#470683); +#470682 = CARTESIAN_POINT('',(151.74805,-133.797376,-7.5E-02)); +#470683 = VECTOR('',#470684,1.); +#470684 = DIRECTION('',(0.39205522868,0.919941681665,0.)); +#470685 = ORIENTED_EDGE('',*,*,#470686,.T.); +#470686 = EDGE_CURVE('',#470679,#470578,#470687,.T.); +#470687 = LINE('',#470688,#470689); +#470688 = CARTESIAN_POINT('',(151.762525,-133.763411,-7.5E-02)); +#470689 = VECTOR('',#470690,1.); +#470690 = DIRECTION('',(-1.,0.,0.)); +#470691 = FACE_BOUND('',#470692,.T.); +#470692 = EDGE_LOOP('',(#470693,#470703,#470711,#470719,#470727,#470736, + #470744,#470753)); +#470693 = ORIENTED_EDGE('',*,*,#470694,.T.); +#470694 = EDGE_CURVE('',#470695,#470697,#470699,.T.); +#470695 = VERTEX_POINT('',#470696); +#470696 = CARTESIAN_POINT('',(152.412475,-133.820452,-7.5E-02)); +#470697 = VERTEX_POINT('',#470698); +#470698 = CARTESIAN_POINT('',(152.383954,-133.763411,-7.5E-02)); +#470699 = LINE('',#470700,#470701); +#470700 = CARTESIAN_POINT('',(152.412475,-133.820452,-7.5E-02)); +#470701 = VECTOR('',#470702,1.); +#470702 = DIRECTION('',(-0.447219867638,0.894424054904,0.)); +#470703 = ORIENTED_EDGE('',*,*,#470704,.T.); +#470704 = EDGE_CURVE('',#470697,#470705,#470707,.T.); +#470705 = VERTEX_POINT('',#470706); +#470706 = CARTESIAN_POINT('',(151.874329,-133.763411,-7.5E-02)); +#470707 = LINE('',#470708,#470709); +#470708 = CARTESIAN_POINT('',(152.383954,-133.763411,-7.5E-02)); +#470709 = VECTOR('',#470710,1.); +#470710 = DIRECTION('',(-1.,0.,0.)); +#470711 = ORIENTED_EDGE('',*,*,#470712,.T.); +#470712 = EDGE_CURVE('',#470705,#470713,#470715,.T.); +#470713 = VERTEX_POINT('',#470714); +#470714 = CARTESIAN_POINT('',(151.845808,-133.820452,-7.5E-02)); +#470715 = LINE('',#470716,#470717); +#470716 = CARTESIAN_POINT('',(151.874329,-133.763411,-7.5E-02)); +#470717 = VECTOR('',#470718,1.); +#470718 = DIRECTION('',(-0.447219867637,-0.894424054904,0.)); +#470719 = ORIENTED_EDGE('',*,*,#470720,.T.); +#470720 = EDGE_CURVE('',#470713,#470721,#470723,.T.); +#470721 = VERTEX_POINT('',#470722); +#470722 = CARTESIAN_POINT('',(151.845808,-133.987322,-7.5E-02)); +#470723 = LINE('',#470724,#470725); +#470724 = CARTESIAN_POINT('',(151.845808,-133.820452,-7.5E-02)); +#470725 = VECTOR('',#470726,1.); +#470726 = DIRECTION('',(0.,-1.,0.)); +#470727 = ORIENTED_EDGE('',*,*,#470728,.T.); +#470728 = EDGE_CURVE('',#470721,#470729,#470731,.T.); +#470729 = VERTEX_POINT('',#470730); +#470730 = CARTESIAN_POINT('',(151.998088,-134.139601,-7.5E-02)); +#470731 = CIRCLE('',#470732,0.215060459698); +#470732 = AXIS2_PLACEMENT_3D('',#470733,#470734,#470735); +#470733 = CARTESIAN_POINT('',(152.05358433746,-133.931824298,-7.5E-02)); +#470734 = DIRECTION('',(0.,0.,1.)); +#470735 = DIRECTION('',(-0.966129886234,-0.2580562786,0.)); +#470736 = ORIENTED_EDGE('',*,*,#470737,.T.); +#470737 = EDGE_CURVE('',#470729,#470738,#470740,.T.); +#470738 = VERTEX_POINT('',#470739); +#470739 = CARTESIAN_POINT('',(152.260195,-134.139601,-7.5E-02)); +#470740 = LINE('',#470741,#470742); +#470741 = CARTESIAN_POINT('',(151.998088,-134.139601,-7.5E-02)); +#470742 = VECTOR('',#470743,1.); +#470743 = DIRECTION('',(1.,0.,0.)); +#470744 = ORIENTED_EDGE('',*,*,#470745,.T.); +#470745 = EDGE_CURVE('',#470738,#470746,#470748,.T.); +#470746 = VERTEX_POINT('',#470747); +#470747 = CARTESIAN_POINT('',(152.412475,-133.987321,-7.5E-02)); +#470748 = CIRCLE('',#470749,0.215072998571); +#470749 = AXIS2_PLACEMENT_3D('',#470750,#470751,#470752); +#470750 = CARTESIAN_POINT('',(152.20468813236,-133.9318141323,-7.5E-02) + ); +#470751 = DIRECTION('',(0.,0.,1.)); +#470752 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#470753 = ORIENTED_EDGE('',*,*,#470754,.T.); +#470754 = EDGE_CURVE('',#470746,#470695,#470755,.T.); +#470755 = LINE('',#470756,#470757); +#470756 = CARTESIAN_POINT('',(152.412475,-133.987321,-7.5E-02)); +#470757 = VECTOR('',#470758,1.); +#470758 = DIRECTION('',(0.,1.,0.)); +#470759 = PLANE('',#470760); +#470760 = AXIS2_PLACEMENT_3D('',#470761,#470762,#470763); +#470761 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470762 = DIRECTION('',(-0.,-0.,-1.)); +#470763 = DIRECTION('',(-1.,0.,0.)); +#470764 = SHELL_BASED_SURFACE_MODEL('',(#470765)); +#470765 = OPEN_SHELL('',(#470766)); +#470766 = ADVANCED_FACE('',(#470767),#470803,.T.); +#470767 = FACE_BOUND('',#470768,.T.); +#470768 = EDGE_LOOP('',(#470769,#470780,#470788,#470797)); +#470769 = ORIENTED_EDGE('',*,*,#470770,.T.); +#470770 = EDGE_CURVE('',#470771,#470773,#470775,.T.); +#470771 = VERTEX_POINT('',#470772); +#470772 = CARTESIAN_POINT('',(148.506359,-134.14,-7.5E-02)); +#470773 = VERTEX_POINT('',#470774); +#470774 = CARTESIAN_POINT('',(148.506359,-134.02,-7.5E-02)); +#470775 = CIRCLE('',#470776,6.000000000041E-02); +#470776 = AXIS2_PLACEMENT_3D('',#470777,#470778,#470779); +#470777 = CARTESIAN_POINT('',(148.50635877441,-134.08,-7.5E-02)); +#470778 = DIRECTION('',(0.,0.,-1.)); +#470779 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#470780 = ORIENTED_EDGE('',*,*,#470781,.T.); +#470781 = EDGE_CURVE('',#470773,#470782,#470784,.T.); +#470782 = VERTEX_POINT('',#470783); +#470783 = CARTESIAN_POINT('',(148.813641,-134.02,-7.5E-02)); +#470784 = LINE('',#470785,#470786); +#470785 = CARTESIAN_POINT('',(148.506359,-134.02,-7.5E-02)); +#470786 = VECTOR('',#470787,1.); +#470787 = DIRECTION('',(1.,0.,0.)); +#470788 = ORIENTED_EDGE('',*,*,#470789,.T.); +#470789 = EDGE_CURVE('',#470782,#470790,#470792,.T.); +#470790 = VERTEX_POINT('',#470791); +#470791 = CARTESIAN_POINT('',(148.813641,-134.14,-7.5E-02)); +#470792 = CIRCLE('',#470793,6.000000000041E-02); +#470793 = AXIS2_PLACEMENT_3D('',#470794,#470795,#470796); +#470794 = CARTESIAN_POINT('',(148.81364122558,-134.08,-7.5E-02)); +#470795 = DIRECTION('',(0.,0.,-1.)); +#470796 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#470797 = ORIENTED_EDGE('',*,*,#470798,.T.); +#470798 = EDGE_CURVE('',#470790,#470771,#470799,.T.); +#470799 = LINE('',#470800,#470801); +#470800 = CARTESIAN_POINT('',(148.813641,-134.14,-7.5E-02)); +#470801 = VECTOR('',#470802,1.); +#470802 = DIRECTION('',(-1.,0.,0.)); +#470803 = PLANE('',#470804); +#470804 = AXIS2_PLACEMENT_3D('',#470805,#470806,#470807); +#470805 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470806 = DIRECTION('',(-0.,-0.,-1.)); +#470807 = DIRECTION('',(-1.,0.,0.)); +#470808 = SHELL_BASED_SURFACE_MODEL('',(#470809)); +#470809 = OPEN_SHELL('',(#470810)); +#470810 = ADVANCED_FACE('',(#470811),#470913,.T.); +#470811 = FACE_BOUND('',#470812,.T.); +#470812 = EDGE_LOOP('',(#470813,#470823,#470831,#470839,#470847,#470855, + #470863,#470871,#470879,#470885,#470893,#470901,#470907)); +#470813 = ORIENTED_EDGE('',*,*,#470814,.T.); +#470814 = EDGE_CURVE('',#470815,#470817,#470819,.T.); +#470815 = VERTEX_POINT('',#470816); +#470816 = CARTESIAN_POINT('',(133.467864,-133.258412,-7.5E-02)); +#470817 = VERTEX_POINT('',#470818); +#470818 = CARTESIAN_POINT('',(133.467864,-132.970321,-7.5E-02)); +#470819 = LINE('',#470820,#470821); +#470820 = CARTESIAN_POINT('',(133.467864,-133.258412,-7.5E-02)); +#470821 = VECTOR('',#470822,1.); +#470822 = DIRECTION('',(0.,1.,0.)); +#470823 = ORIENTED_EDGE('',*,*,#470824,.T.); +#470824 = EDGE_CURVE('',#470817,#470825,#470827,.T.); +#470825 = VERTEX_POINT('',#470826); +#470826 = CARTESIAN_POINT('',(134.044046,-132.970321,-7.5E-02)); +#470827 = LINE('',#470828,#470829); +#470828 = CARTESIAN_POINT('',(133.467864,-132.970321,-7.5E-02)); +#470829 = VECTOR('',#470830,1.); +#470830 = DIRECTION('',(1.,0.,0.)); +#470831 = ORIENTED_EDGE('',*,*,#470832,.T.); +#470832 = EDGE_CURVE('',#470825,#470833,#470835,.T.); +#470833 = VERTEX_POINT('',#470834); +#470834 = CARTESIAN_POINT('',(134.044046,-133.114367,-7.5E-02)); +#470835 = LINE('',#470836,#470837); +#470836 = CARTESIAN_POINT('',(134.044046,-132.970321,-7.5E-02)); +#470837 = VECTOR('',#470838,1.); +#470838 = DIRECTION('',(0.,-1.,0.)); +#470839 = ORIENTED_EDGE('',*,*,#470840,.T.); +#470840 = EDGE_CURVE('',#470833,#470841,#470843,.T.); +#470841 = VERTEX_POINT('',#470842); +#470842 = CARTESIAN_POINT('',(134.044046,-133.258412,-7.5E-02)); +#470843 = LINE('',#470844,#470845); +#470844 = CARTESIAN_POINT('',(134.044046,-133.114367,-7.5E-02)); +#470845 = VECTOR('',#470846,1.); +#470846 = DIRECTION('',(0.,-1.,0.)); +#470847 = ORIENTED_EDGE('',*,*,#470848,.T.); +#470848 = EDGE_CURVE('',#470841,#470849,#470851,.T.); +#470849 = VERTEX_POINT('',#470850); +#470850 = CARTESIAN_POINT('',(134.332136,-133.258412,-7.5E-02)); +#470851 = LINE('',#470852,#470853); +#470852 = CARTESIAN_POINT('',(134.044046,-133.258412,-7.5E-02)); +#470853 = VECTOR('',#470854,1.); +#470854 = DIRECTION('',(1.,0.,0.)); +#470855 = ORIENTED_EDGE('',*,*,#470856,.T.); +#470856 = EDGE_CURVE('',#470849,#470857,#470859,.T.); +#470857 = VERTEX_POINT('',#470858); +#470858 = CARTESIAN_POINT('',(134.332136,-132.970321,-7.5E-02)); +#470859 = LINE('',#470860,#470861); +#470860 = CARTESIAN_POINT('',(134.332136,-133.258412,-7.5E-02)); +#470861 = VECTOR('',#470862,1.); +#470862 = DIRECTION('',(0.,1.,0.)); +#470863 = ORIENTED_EDGE('',*,*,#470864,.T.); +#470864 = EDGE_CURVE('',#470857,#470865,#470867,.T.); +#470865 = VERTEX_POINT('',#470866); +#470866 = CARTESIAN_POINT('',(134.620227,-132.970321,-7.5E-02)); +#470867 = LINE('',#470868,#470869); +#470868 = CARTESIAN_POINT('',(134.332136,-132.970321,-7.5E-02)); +#470869 = VECTOR('',#470870,1.); +#470870 = DIRECTION('',(1.,0.,0.)); +#470871 = ORIENTED_EDGE('',*,*,#470872,.T.); +#470872 = EDGE_CURVE('',#470865,#470873,#470875,.T.); +#470873 = VERTEX_POINT('',#470874); +#470874 = CARTESIAN_POINT('',(134.620227,-133.258412,-7.5E-02)); +#470875 = LINE('',#470876,#470877); +#470876 = CARTESIAN_POINT('',(134.620227,-132.970321,-7.5E-02)); +#470877 = VECTOR('',#470878,1.); +#470878 = DIRECTION('',(0.,-1.,0.)); +#470879 = ORIENTED_EDGE('',*,*,#470880,.T.); +#470880 = EDGE_CURVE('',#470873,#470849,#470881,.T.); +#470881 = LINE('',#470882,#470883); +#470882 = CARTESIAN_POINT('',(134.620227,-133.258412,-7.5E-02)); +#470883 = VECTOR('',#470884,1.); +#470884 = DIRECTION('',(-1.,0.,0.)); +#470885 = ORIENTED_EDGE('',*,*,#470886,.T.); +#470886 = EDGE_CURVE('',#470849,#470887,#470889,.T.); +#470887 = VERTEX_POINT('',#470888); +#470888 = CARTESIAN_POINT('',(134.332136,-133.834593,-7.5E-02)); +#470889 = LINE('',#470890,#470891); +#470890 = CARTESIAN_POINT('',(134.332136,-133.258412,-7.5E-02)); +#470891 = VECTOR('',#470892,1.); +#470892 = DIRECTION('',(0.,-1.,0.)); +#470893 = ORIENTED_EDGE('',*,*,#470894,.T.); +#470894 = EDGE_CURVE('',#470887,#470895,#470897,.T.); +#470895 = VERTEX_POINT('',#470896); +#470896 = CARTESIAN_POINT('',(134.044046,-133.834593,-7.5E-02)); +#470897 = LINE('',#470898,#470899); +#470898 = CARTESIAN_POINT('',(134.332136,-133.834593,-7.5E-02)); +#470899 = VECTOR('',#470900,1.); +#470900 = DIRECTION('',(-1.,0.,0.)); +#470901 = ORIENTED_EDGE('',*,*,#470902,.T.); +#470902 = EDGE_CURVE('',#470895,#470841,#470903,.T.); +#470903 = LINE('',#470904,#470905); +#470904 = CARTESIAN_POINT('',(134.044046,-133.834593,-7.5E-02)); +#470905 = VECTOR('',#470906,1.); +#470906 = DIRECTION('',(0.,1.,0.)); +#470907 = ORIENTED_EDGE('',*,*,#470908,.T.); +#470908 = EDGE_CURVE('',#470841,#470815,#470909,.T.); +#470909 = LINE('',#470910,#470911); +#470910 = CARTESIAN_POINT('',(134.044046,-133.258412,-7.5E-02)); +#470911 = VECTOR('',#470912,1.); +#470912 = DIRECTION('',(-1.,0.,0.)); +#470913 = PLANE('',#470914); +#470914 = AXIS2_PLACEMENT_3D('',#470915,#470916,#470917); +#470915 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#470916 = DIRECTION('',(-0.,-0.,-1.)); +#470917 = DIRECTION('',(-1.,0.,0.)); +#470918 = SHELL_BASED_SURFACE_MODEL('',(#470919)); +#470919 = OPEN_SHELL('',(#470920)); +#470920 = ADVANCED_FACE('',(#470921),#471048,.T.); +#470921 = FACE_BOUND('',#470922,.T.); +#470922 = EDGE_LOOP('',(#470923,#470934,#470942,#470951,#470959,#470967, + #470976,#470984,#470993,#471001,#471009,#471018,#471026,#471034, + #471042)); +#470923 = ORIENTED_EDGE('',*,*,#470924,.T.); +#470924 = EDGE_CURVE('',#470925,#470927,#470929,.T.); +#470925 = VERTEX_POINT('',#470926); +#470926 = CARTESIAN_POINT('',(153.023049,-132.626085,-7.5E-02)); +#470927 = VERTEX_POINT('',#470928); +#470928 = CARTESIAN_POINT('',(153.084,-132.569531,-7.5E-02)); +#470929 = CIRCLE('',#470930,4.999899407893E-02); +#470930 = AXIS2_PLACEMENT_3D('',#470931,#470932,#470933); +#470931 = CARTESIAN_POINT('',(153.07241752334,-132.6181699313,-7.5E-02) + ); +#470932 = DIRECTION('',(0.,0.,-1.)); +#470933 = DIRECTION('',(-0.987390331634,-0.15830455772,-0.)); +#470934 = ORIENTED_EDGE('',*,*,#470935,.T.); +#470935 = EDGE_CURVE('',#470927,#470936,#470938,.T.); +#470936 = VERTEX_POINT('',#470937); +#470937 = CARTESIAN_POINT('',(154.084,-132.807626,-7.5E-02)); +#470938 = LINE('',#470939,#470940); +#470939 = CARTESIAN_POINT('',(153.084,-132.569531,-7.5E-02)); +#470940 = VECTOR('',#470941,1.); +#470941 = DIRECTION('',(0.972806266875,-0.231620308111,0.)); +#470942 = ORIENTED_EDGE('',*,*,#470943,.T.); +#470943 = EDGE_CURVE('',#470936,#470944,#470946,.T.); +#470944 = VERTEX_POINT('',#470945); +#470945 = CARTESIAN_POINT('',(154.085302,-132.904578,-7.5E-02)); +#470946 = CIRCLE('',#470947,4.99998291687E-02); +#470947 = AXIS2_PLACEMENT_3D('',#470948,#470949,#470950); +#470948 = CARTESIAN_POINT('',(154.07241950138,-132.8562662607,-7.5E-02) + ); +#470949 = DIRECTION('',(0.,0.,-1.)); +#470950 = DIRECTION('',(0.231610763567,0.972808539333,0.)); +#470951 = ORIENTED_EDGE('',*,*,#470952,.T.); +#470952 = EDGE_CURVE('',#470944,#470953,#470955,.T.); +#470953 = VERTEX_POINT('',#470954); +#470954 = CARTESIAN_POINT('',(153.552186,-133.046742,-7.5E-02)); +#470955 = LINE('',#470956,#470957); +#470956 = CARTESIAN_POINT('',(154.085302,-132.904578,-7.5E-02)); +#470957 = VECTOR('',#470958,1.); +#470958 = DIRECTION('',(-0.966235059928,-0.257662199333,0.)); +#470959 = ORIENTED_EDGE('',*,*,#470960,.T.); +#470960 = EDGE_CURVE('',#470953,#470961,#470963,.T.); +#470961 = VERTEX_POINT('',#470962); +#470962 = CARTESIAN_POINT('',(154.085302,-133.188906,-7.5E-02)); +#470963 = LINE('',#470964,#470965); +#470964 = CARTESIAN_POINT('',(153.552186,-133.046742,-7.5E-02)); +#470965 = VECTOR('',#470966,1.); +#470966 = DIRECTION('',(0.966235059928,-0.257662199333,0.)); +#470967 = ORIENTED_EDGE('',*,*,#470968,.T.); +#470968 = EDGE_CURVE('',#470961,#470969,#470971,.T.); +#470969 = VERTEX_POINT('',#470970); +#470970 = CARTESIAN_POINT('',(154.084,-133.285858,-7.5E-02)); +#470971 = CIRCLE('',#470972,4.999977859363E-02); +#470972 = AXIS2_PLACEMENT_3D('',#470973,#470974,#470975); +#470973 = CARTESIAN_POINT('',(154.07241970809,-133.2372177419,-7.5E-02) + ); +#470974 = DIRECTION('',(0.,0.,-1.)); +#470975 = DIRECTION('',(0.257646979039,0.966239118538,0.)); +#470976 = ORIENTED_EDGE('',*,*,#470977,.T.); +#470977 = EDGE_CURVE('',#470969,#470978,#470980,.T.); +#470978 = VERTEX_POINT('',#470979); +#470979 = CARTESIAN_POINT('',(153.084,-133.523954,-7.5E-02)); +#470980 = LINE('',#470981,#470982); +#470981 = CARTESIAN_POINT('',(154.084,-133.285858,-7.5E-02)); +#470982 = VECTOR('',#470983,1.); +#470983 = DIRECTION('',(-0.97280604768,-0.231621228728,0.)); +#470984 = ORIENTED_EDGE('',*,*,#470985,.T.); +#470985 = EDGE_CURVE('',#470978,#470986,#470988,.T.); +#470986 = VERTEX_POINT('',#470987); +#470987 = CARTESIAN_POINT('',(153.060838,-133.426674,-7.5E-02)); +#470988 = CIRCLE('',#470989,4.999969160948E-02); +#470989 = AXIS2_PLACEMENT_3D('',#470990,#470991,#470992); +#470990 = CARTESIAN_POINT('',(153.07241880158,-133.4753140472,-7.5E-02) + ); +#470991 = DIRECTION('',(0.,0.,-1.)); +#470992 = DIRECTION('',(0.231625397006,-0.97280505522,0.)); +#470993 = ORIENTED_EDGE('',*,*,#470994,.T.); +#470994 = EDGE_CURVE('',#470986,#470995,#470997,.T.); +#470995 = VERTEX_POINT('',#470996); +#470996 = CARTESIAN_POINT('',(153.868075,-133.234473,-7.5E-02)); +#470997 = LINE('',#470998,#470999); +#470998 = CARTESIAN_POINT('',(153.060838,-133.426674,-7.5E-02)); +#470999 = VECTOR('',#471000,1.); +#471000 = DIRECTION('',(0.972805749192,0.231622482369,0.)); +#471001 = ORIENTED_EDGE('',*,*,#471002,.T.); +#471002 = EDGE_CURVE('',#470995,#471003,#471005,.T.); +#471003 = VERTEX_POINT('',#471004); +#471004 = CARTESIAN_POINT('',(153.34525,-133.095054,-7.5E-02)); +#471005 = LINE('',#471006,#471007); +#471006 = CARTESIAN_POINT('',(153.868075,-133.234473,-7.5E-02)); +#471007 = VECTOR('',#471008,1.); +#471008 = DIRECTION('',(-0.966235399709,0.257660925151,0.)); +#471009 = ORIENTED_EDGE('',*,*,#471010,.T.); +#471010 = EDGE_CURVE('',#471003,#471011,#471013,.T.); +#471011 = VERTEX_POINT('',#471012); +#471012 = CARTESIAN_POINT('',(153.34525,-132.99843,-7.5E-02)); +#471013 = CIRCLE('',#471014,5.000045166512E-02); +#471014 = AXIS2_PLACEMENT_3D('',#471015,#471016,#471017); +#471015 = CARTESIAN_POINT('',(153.35813393661,-133.046742,-7.5E-02)); +#471016 = DIRECTION('',(0.,0.,-1.)); +#471017 = DIRECTION('',(-0.257676404645,-0.966231271741,-0.)); +#471018 = ORIENTED_EDGE('',*,*,#471019,.T.); +#471019 = EDGE_CURVE('',#471011,#471020,#471022,.T.); +#471020 = VERTEX_POINT('',#471021); +#471021 = CARTESIAN_POINT('',(153.868075,-132.85901,-7.5E-02)); +#471022 = LINE('',#471023,#471024); +#471023 = CARTESIAN_POINT('',(153.34525,-132.99843,-7.5E-02)); +#471024 = VECTOR('',#471025,1.); +#471025 = DIRECTION('',(0.966234939601,0.25766265056,0.)); +#471026 = ORIENTED_EDGE('',*,*,#471027,.T.); +#471027 = EDGE_CURVE('',#471020,#471028,#471030,.T.); +#471028 = VERTEX_POINT('',#471029); +#471029 = CARTESIAN_POINT('',(153.060838,-132.666811,-7.5E-02)); +#471030 = LINE('',#471031,#471032); +#471031 = CARTESIAN_POINT('',(153.868075,-132.85901,-7.5E-02)); +#471032 = VECTOR('',#471033,1.); +#471033 = DIRECTION('',(-0.972806292267,0.231620201462,0.)); +#471034 = ORIENTED_EDGE('',*,*,#471035,.T.); +#471035 = EDGE_CURVE('',#471028,#471036,#471038,.T.); +#471036 = VERTEX_POINT('',#471037); +#471037 = CARTESIAN_POINT('',(153.043106,-132.658677,-7.5E-02)); +#471038 = LINE('',#471039,#471040); +#471039 = CARTESIAN_POINT('',(153.060838,-132.666811,-7.5E-02)); +#471040 = VECTOR('',#471041,1.); +#471041 = DIRECTION('',(-0.908932105359,0.416944154352,0.)); +#471042 = ORIENTED_EDGE('',*,*,#471043,.T.); +#471043 = EDGE_CURVE('',#471036,#470925,#471044,.T.); +#471044 = LINE('',#471045,#471046); +#471045 = CARTESIAN_POINT('',(153.043106,-132.658677,-7.5E-02)); +#471046 = VECTOR('',#471047,1.); +#471047 = DIRECTION('',(-0.524104715343,0.851653830705,0.)); +#471048 = PLANE('',#471049); +#471049 = AXIS2_PLACEMENT_3D('',#471050,#471051,#471052); +#471050 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471051 = DIRECTION('',(-0.,-0.,-1.)); +#471052 = DIRECTION('',(-1.,0.,0.)); +#471053 = SHELL_BASED_SURFACE_MODEL('',(#471054)); +#471054 = OPEN_SHELL('',(#471055)); +#471055 = ADVANCED_FACE('',(#471056),#471092,.T.); +#471056 = FACE_BOUND('',#471057,.T.); +#471057 = EDGE_LOOP('',(#471058,#471069,#471077,#471086)); +#471058 = ORIENTED_EDGE('',*,*,#471059,.T.); +#471059 = EDGE_CURVE('',#471060,#471062,#471064,.T.); +#471060 = VERTEX_POINT('',#471061); +#471061 = CARTESIAN_POINT('',(148.506359,-133.38,-7.5E-02)); +#471062 = VERTEX_POINT('',#471063); +#471063 = CARTESIAN_POINT('',(148.506359,-133.26,-7.5E-02)); +#471064 = CIRCLE('',#471065,6.000000000042E-02); +#471065 = AXIS2_PLACEMENT_3D('',#471066,#471067,#471068); +#471066 = CARTESIAN_POINT('',(148.50635877441,-133.32,-7.5E-02)); +#471067 = DIRECTION('',(0.,0.,-1.)); +#471068 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#471069 = ORIENTED_EDGE('',*,*,#471070,.T.); +#471070 = EDGE_CURVE('',#471062,#471071,#471073,.T.); +#471071 = VERTEX_POINT('',#471072); +#471072 = CARTESIAN_POINT('',(148.813641,-133.26,-7.5E-02)); +#471073 = LINE('',#471074,#471075); +#471074 = CARTESIAN_POINT('',(148.506359,-133.26,-7.5E-02)); +#471075 = VECTOR('',#471076,1.); +#471076 = DIRECTION('',(1.,0.,0.)); +#471077 = ORIENTED_EDGE('',*,*,#471078,.T.); +#471078 = EDGE_CURVE('',#471071,#471079,#471081,.T.); +#471079 = VERTEX_POINT('',#471080); +#471080 = CARTESIAN_POINT('',(148.813641,-133.38,-7.5E-02)); +#471081 = CIRCLE('',#471082,6.000000000042E-02); +#471082 = AXIS2_PLACEMENT_3D('',#471083,#471084,#471085); +#471083 = CARTESIAN_POINT('',(148.81364122558,-133.32,-7.5E-02)); +#471084 = DIRECTION('',(0.,0.,-1.)); +#471085 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#471086 = ORIENTED_EDGE('',*,*,#471087,.T.); +#471087 = EDGE_CURVE('',#471079,#471060,#471088,.T.); +#471088 = LINE('',#471089,#471090); +#471089 = CARTESIAN_POINT('',(148.813641,-133.38,-7.5E-02)); +#471090 = VECTOR('',#471091,1.); +#471091 = DIRECTION('',(-1.,0.,0.)); +#471092 = PLANE('',#471093); +#471093 = AXIS2_PLACEMENT_3D('',#471094,#471095,#471096); +#471094 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471095 = DIRECTION('',(-0.,-0.,-1.)); +#471096 = DIRECTION('',(-1.,0.,0.)); +#471097 = SHELL_BASED_SURFACE_MODEL('',(#471098)); +#471098 = OPEN_SHELL('',(#471099)); +#471099 = ADVANCED_FACE('',(#471100),#471142,.T.); +#471100 = FACE_BOUND('',#471101,.T.); +#471101 = EDGE_LOOP('',(#471102,#471112,#471120,#471128,#471136)); +#471102 = ORIENTED_EDGE('',*,*,#471103,.T.); +#471103 = EDGE_CURVE('',#471104,#471106,#471108,.T.); +#471104 = VERTEX_POINT('',#471105); +#471105 = CARTESIAN_POINT('',(134.908318,-133.258412,-7.5E-02)); +#471106 = VERTEX_POINT('',#471107); +#471107 = CARTESIAN_POINT('',(134.908318,-132.970321,-7.5E-02)); +#471108 = LINE('',#471109,#471110); +#471109 = CARTESIAN_POINT('',(134.908318,-133.258412,-7.5E-02)); +#471110 = VECTOR('',#471111,1.); +#471111 = DIRECTION('',(0.,1.,0.)); +#471112 = ORIENTED_EDGE('',*,*,#471113,.T.); +#471113 = EDGE_CURVE('',#471106,#471114,#471116,.T.); +#471114 = VERTEX_POINT('',#471115); +#471115 = CARTESIAN_POINT('',(135.196408,-132.970321,-7.5E-02)); +#471116 = LINE('',#471117,#471118); +#471117 = CARTESIAN_POINT('',(134.908318,-132.970321,-7.5E-02)); +#471118 = VECTOR('',#471119,1.); +#471119 = DIRECTION('',(1.,0.,0.)); +#471120 = ORIENTED_EDGE('',*,*,#471121,.T.); +#471121 = EDGE_CURVE('',#471114,#471122,#471124,.T.); +#471122 = VERTEX_POINT('',#471123); +#471123 = CARTESIAN_POINT('',(135.196408,-133.114367,-7.5E-02)); +#471124 = LINE('',#471125,#471126); +#471125 = CARTESIAN_POINT('',(135.196408,-132.970321,-7.5E-02)); +#471126 = VECTOR('',#471127,1.); +#471127 = DIRECTION('',(0.,-1.,0.)); +#471128 = ORIENTED_EDGE('',*,*,#471129,.T.); +#471129 = EDGE_CURVE('',#471122,#471130,#471132,.T.); +#471130 = VERTEX_POINT('',#471131); +#471131 = CARTESIAN_POINT('',(135.196408,-133.258412,-7.5E-02)); +#471132 = LINE('',#471133,#471134); +#471133 = CARTESIAN_POINT('',(135.196408,-133.114367,-7.5E-02)); +#471134 = VECTOR('',#471135,1.); +#471135 = DIRECTION('',(0.,-1.,0.)); +#471136 = ORIENTED_EDGE('',*,*,#471137,.T.); +#471137 = EDGE_CURVE('',#471130,#471104,#471138,.T.); +#471138 = LINE('',#471139,#471140); +#471139 = CARTESIAN_POINT('',(135.196408,-133.258412,-7.5E-02)); +#471140 = VECTOR('',#471141,1.); +#471141 = DIRECTION('',(-1.,0.,0.)); +#471142 = PLANE('',#471143); +#471143 = AXIS2_PLACEMENT_3D('',#471144,#471145,#471146); +#471144 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471145 = DIRECTION('',(-0.,-0.,-1.)); +#471146 = DIRECTION('',(-1.,0.,0.)); +#471147 = SHELL_BASED_SURFACE_MODEL('',(#471148)); +#471148 = OPEN_SHELL('',(#471149)); +#471149 = ADVANCED_FACE('',(#471150),#471192,.T.); +#471150 = FACE_BOUND('',#471151,.T.); +#471151 = EDGE_LOOP('',(#471152,#471162,#471170,#471178,#471186)); +#471152 = ORIENTED_EDGE('',*,*,#471153,.T.); +#471153 = EDGE_CURVE('',#471154,#471156,#471158,.T.); +#471154 = VERTEX_POINT('',#471155); +#471155 = CARTESIAN_POINT('',(135.484499,-133.258412,-7.5E-02)); +#471156 = VERTEX_POINT('',#471157); +#471157 = CARTESIAN_POINT('',(135.484499,-132.970321,-7.5E-02)); +#471158 = LINE('',#471159,#471160); +#471159 = CARTESIAN_POINT('',(135.484499,-133.258412,-7.5E-02)); +#471160 = VECTOR('',#471161,1.); +#471161 = DIRECTION('',(0.,1.,0.)); +#471162 = ORIENTED_EDGE('',*,*,#471163,.T.); +#471163 = EDGE_CURVE('',#471156,#471164,#471166,.T.); +#471164 = VERTEX_POINT('',#471165); +#471165 = CARTESIAN_POINT('',(136.060681,-132.970321,-7.5E-02)); +#471166 = LINE('',#471167,#471168); +#471167 = CARTESIAN_POINT('',(135.484499,-132.970321,-7.5E-02)); +#471168 = VECTOR('',#471169,1.); +#471169 = DIRECTION('',(1.,0.,0.)); +#471170 = ORIENTED_EDGE('',*,*,#471171,.T.); +#471171 = EDGE_CURVE('',#471164,#471172,#471174,.T.); +#471172 = VERTEX_POINT('',#471173); +#471173 = CARTESIAN_POINT('',(136.060681,-133.114367,-7.5E-02)); +#471174 = LINE('',#471175,#471176); +#471175 = CARTESIAN_POINT('',(136.060681,-132.970321,-7.5E-02)); +#471176 = VECTOR('',#471177,1.); +#471177 = DIRECTION('',(0.,-1.,0.)); +#471178 = ORIENTED_EDGE('',*,*,#471179,.T.); +#471179 = EDGE_CURVE('',#471172,#471180,#471182,.T.); +#471180 = VERTEX_POINT('',#471181); +#471181 = CARTESIAN_POINT('',(136.060681,-133.258412,-7.5E-02)); +#471182 = LINE('',#471183,#471184); +#471183 = CARTESIAN_POINT('',(136.060681,-133.114367,-7.5E-02)); +#471184 = VECTOR('',#471185,1.); +#471185 = DIRECTION('',(0.,-1.,0.)); +#471186 = ORIENTED_EDGE('',*,*,#471187,.T.); +#471187 = EDGE_CURVE('',#471180,#471154,#471188,.T.); +#471188 = LINE('',#471189,#471190); +#471189 = CARTESIAN_POINT('',(136.060681,-133.258412,-7.5E-02)); +#471190 = VECTOR('',#471191,1.); +#471191 = DIRECTION('',(-1.,0.,0.)); +#471192 = PLANE('',#471193); +#471193 = AXIS2_PLACEMENT_3D('',#471194,#471195,#471196); +#471194 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471195 = DIRECTION('',(-0.,-0.,-1.)); +#471196 = DIRECTION('',(-1.,0.,0.)); +#471197 = SHELL_BASED_SURFACE_MODEL('',(#471198)); +#471198 = OPEN_SHELL('',(#471199)); +#471199 = ADVANCED_FACE('',(#471200),#471359,.T.); +#471200 = FACE_BOUND('',#471201,.T.); +#471201 = EDGE_LOOP('',(#471202,#471213,#471221,#471230,#471238,#471246, + #471254,#471262,#471270,#471278,#471287,#471295,#471304,#471312, + #471321,#471329,#471337,#471345,#471353)); +#471202 = ORIENTED_EDGE('',*,*,#471203,.T.); +#471203 = EDGE_CURVE('',#471204,#471206,#471208,.T.); +#471204 = VERTEX_POINT('',#471205); +#471205 = CARTESIAN_POINT('',(152.42712,-131.868532,-7.5E-02)); +#471206 = VERTEX_POINT('',#471207); +#471207 = CARTESIAN_POINT('',(152.512475,-131.903887,-7.5E-02)); +#471208 = CIRCLE('',#471209,4.99996389501E-02); +#471209 = AXIS2_PLACEMENT_3D('',#471210,#471211,#471212); +#471210 = CARTESIAN_POINT('',(152.46247536105,-131.9038868064,-7.5E-02) + ); +#471211 = DIRECTION('',(0.,0.,-1.)); +#471212 = DIRECTION('',(-0.707112327062,0.707101235268,0.)); +#471213 = ORIENTED_EDGE('',*,*,#471214,.T.); +#471214 = EDGE_CURVE('',#471206,#471215,#471217,.T.); +#471215 = VERTEX_POINT('',#471216); +#471216 = CARTESIAN_POINT('',(152.512475,-132.522934,-7.5E-02)); +#471217 = LINE('',#471218,#471219); +#471218 = CARTESIAN_POINT('',(152.512475,-131.903887,-7.5E-02)); +#471219 = VECTOR('',#471220,1.); +#471220 = DIRECTION('',(0.,-1.,0.)); +#471221 = ORIENTED_EDGE('',*,*,#471222,.T.); +#471222 = EDGE_CURVE('',#471215,#471223,#471225,.T.); +#471223 = VERTEX_POINT('',#471224); +#471224 = CARTESIAN_POINT('',(152.412475,-132.522934,-7.5E-02)); +#471225 = CIRCLE('',#471226,5.000000000002E-02); +#471226 = AXIS2_PLACEMENT_3D('',#471227,#471228,#471229); +#471227 = CARTESIAN_POINT('',(152.462475,-132.5229339522,-7.5E-02)); +#471228 = DIRECTION('',(-0.,0.,-1.)); +#471229 = DIRECTION('',(1.,-9.542361567582E-07,-0.)); +#471230 = ORIENTED_EDGE('',*,*,#471231,.T.); +#471231 = EDGE_CURVE('',#471223,#471232,#471234,.T.); +#471232 = VERTEX_POINT('',#471233); +#471233 = CARTESIAN_POINT('',(152.412475,-132.024596,-7.5E-02)); +#471234 = LINE('',#471235,#471236); +#471235 = CARTESIAN_POINT('',(152.412475,-132.522934,-7.5E-02)); +#471236 = VECTOR('',#471237,1.); +#471237 = DIRECTION('',(0.,1.,0.)); +#471238 = ORIENTED_EDGE('',*,*,#471239,.T.); +#471239 = EDGE_CURVE('',#471232,#471240,#471242,.T.); +#471240 = VERTEX_POINT('',#471241); +#471241 = CARTESIAN_POINT('',(151.916844,-132.517055,-7.5E-02)); +#471242 = LINE('',#471243,#471244); +#471243 = CARTESIAN_POINT('',(152.412475,-132.024596,-7.5E-02)); +#471244 = VECTOR('',#471245,1.); +#471245 = DIRECTION('',(-0.709373104087,-0.704833171181,0.)); +#471246 = ORIENTED_EDGE('',*,*,#471247,.T.); +#471247 = EDGE_CURVE('',#471240,#471248,#471250,.T.); +#471248 = VERTEX_POINT('',#471249); +#471249 = CARTESIAN_POINT('',(151.748189,-132.572934,-7.5E-02)); +#471250 = LINE('',#471251,#471252); +#471251 = CARTESIAN_POINT('',(151.916844,-132.517055,-7.5E-02)); +#471252 = VECTOR('',#471253,1.); +#471253 = DIRECTION('',(-0.949254710069,-0.314508339177,0.)); +#471254 = ORIENTED_EDGE('',*,*,#471255,.T.); +#471255 = EDGE_CURVE('',#471248,#471256,#471258,.T.); +#471256 = VERTEX_POINT('',#471257); +#471257 = CARTESIAN_POINT('',(151.641678,-132.570691,-7.5E-02)); +#471258 = LINE('',#471259,#471260); +#471259 = CARTESIAN_POINT('',(151.748189,-132.572934,-7.5E-02)); +#471260 = VECTOR('',#471261,1.); +#471261 = DIRECTION('',(-0.999778335979,2.10541897794E-02,0.)); +#471262 = ORIENTED_EDGE('',*,*,#471263,.T.); +#471263 = EDGE_CURVE('',#471256,#471264,#471266,.T.); +#471264 = VERTEX_POINT('',#471265); +#471265 = CARTESIAN_POINT('',(151.522357,-132.51067,-7.5E-02)); +#471266 = LINE('',#471267,#471268); +#471267 = CARTESIAN_POINT('',(151.641678,-132.570691,-7.5E-02)); +#471268 = VECTOR('',#471269,1.); +#471269 = DIRECTION('',(-0.893344973043,0.449371515718,0.)); +#471270 = ORIENTED_EDGE('',*,*,#471271,.T.); +#471271 = EDGE_CURVE('',#471264,#471272,#471274,.T.); +#471272 = VERTEX_POINT('',#471273); +#471273 = CARTESIAN_POINT('',(151.465372,-132.450056,-7.5E-02)); +#471274 = LINE('',#471275,#471276); +#471275 = CARTESIAN_POINT('',(151.522357,-132.51067,-7.5E-02)); +#471276 = VECTOR('',#471277,1.); +#471277 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#471278 = ORIENTED_EDGE('',*,*,#471279,.T.); +#471279 = EDGE_CURVE('',#471272,#471280,#471282,.T.); +#471280 = VERTEX_POINT('',#471281); +#471281 = CARTESIAN_POINT('',(151.474739,-131.96377,-7.5E-02)); +#471282 = CIRCLE('',#471283,0.429893452528); +#471283 = AXIS2_PLACEMENT_3D('',#471284,#471285,#471286); +#471284 = CARTESIAN_POINT('',(151.82448647595,-132.2137401653,-7.5E-02) + ); +#471285 = DIRECTION('',(0.,0.,-1.)); +#471286 = DIRECTION('',(-0.835356932852,-0.549707917658,-0.)); +#471287 = ORIENTED_EDGE('',*,*,#471288,.T.); +#471288 = EDGE_CURVE('',#471280,#471289,#471291,.T.); +#471289 = VERTEX_POINT('',#471290); +#471290 = CARTESIAN_POINT('',(151.538578,-131.905312,-7.5E-02)); +#471291 = LINE('',#471292,#471293); +#471292 = CARTESIAN_POINT('',(151.474739,-131.96377,-7.5E-02)); +#471293 = VECTOR('',#471294,1.); +#471294 = DIRECTION('',(0.737505544246,0.675341078424,0.)); +#471295 = ORIENTED_EDGE('',*,*,#471296,.T.); +#471296 = EDGE_CURVE('',#471289,#471297,#471299,.T.); +#471297 = VERTEX_POINT('',#471298); +#471298 = CARTESIAN_POINT('',(151.603907,-131.970641,-7.5E-02)); +#471299 = CIRCLE('',#471300,5.000060920128E-02); +#471300 = AXIS2_PLACEMENT_3D('',#471301,#471302,#471303); +#471301 = CARTESIAN_POINT('',(151.5577125,-131.9515065,-7.5E-02)); +#471302 = DIRECTION('',(0.,0.,-1.)); +#471303 = DIRECTION('',(-0.382685337352,0.923878743438,0.)); +#471304 = ORIENTED_EDGE('',*,*,#471305,.T.); +#471305 = EDGE_CURVE('',#471297,#471306,#471308,.T.); +#471306 = VERTEX_POINT('',#471307); +#471307 = CARTESIAN_POINT('',(151.551186,-132.028742,-7.5E-02)); +#471308 = LINE('',#471309,#471310); +#471309 = CARTESIAN_POINT('',(151.603907,-131.970641,-7.5E-02)); +#471310 = VECTOR('',#471311,1.); +#471311 = DIRECTION('',(-0.671987964748,-0.740562067104,0.)); +#471312 = ORIENTED_EDGE('',*,*,#471313,.T.); +#471313 = EDGE_CURVE('',#471306,#471314,#471316,.T.); +#471314 = VERTEX_POINT('',#471315); +#471315 = CARTESIAN_POINT('',(151.551186,-132.398078,-7.5E-02)); +#471316 = CIRCLE('',#471317,0.329231569814); +#471317 = AXIS2_PLACEMENT_3D('',#471318,#471319,#471320); +#471318 = CARTESIAN_POINT('',(151.8237500408,-132.21341,-7.5E-02)); +#471319 = DIRECTION('',(0.,0.,1.)); +#471320 = DIRECTION('',(-0.827879419206,0.560906112692,0.)); +#471321 = ORIENTED_EDGE('',*,*,#471322,.T.); +#471322 = EDGE_CURVE('',#471314,#471323,#471325,.T.); +#471323 = VERTEX_POINT('',#471324); +#471324 = CARTESIAN_POINT('',(151.587331,-132.434222,-7.5E-02)); +#471325 = LINE('',#471326,#471327); +#471326 = CARTESIAN_POINT('',(151.551186,-132.398078,-7.5E-02)); +#471327 = VECTOR('',#471328,1.); +#471328 = DIRECTION('',(0.707116562784,-0.707096999454,0.)); +#471329 = ORIENTED_EDGE('',*,*,#471330,.T.); +#471330 = EDGE_CURVE('',#471323,#471331,#471333,.T.); +#471331 = VERTEX_POINT('',#471332); +#471332 = CARTESIAN_POINT('',(151.664755,-132.472934,-7.5E-02)); +#471333 = LINE('',#471334,#471335); +#471334 = CARTESIAN_POINT('',(151.587331,-132.434222,-7.5E-02)); +#471335 = VECTOR('',#471336,1.); +#471336 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#471337 = ORIENTED_EDGE('',*,*,#471338,.T.); +#471338 = EDGE_CURVE('',#471331,#471339,#471341,.T.); +#471339 = VERTEX_POINT('',#471340); +#471340 = CARTESIAN_POINT('',(151.740076,-132.472934,-7.5E-02)); +#471341 = LINE('',#471342,#471343); +#471342 = CARTESIAN_POINT('',(151.664755,-132.472934,-7.5E-02)); +#471343 = VECTOR('',#471344,1.); +#471344 = DIRECTION('',(1.,0.,0.)); +#471345 = ORIENTED_EDGE('',*,*,#471346,.T.); +#471346 = EDGE_CURVE('',#471339,#471347,#471349,.T.); +#471347 = VERTEX_POINT('',#471348); +#471348 = CARTESIAN_POINT('',(151.864037,-132.431613,-7.5E-02)); +#471349 = LINE('',#471350,#471351); +#471350 = CARTESIAN_POINT('',(151.740076,-132.472934,-7.5E-02)); +#471351 = VECTOR('',#471352,1.); +#471352 = DIRECTION('',(0.948681767426,0.316232357853,0.)); +#471353 = ORIENTED_EDGE('',*,*,#471354,.T.); +#471354 = EDGE_CURVE('',#471347,#471204,#471355,.T.); +#471355 = LINE('',#471356,#471357); +#471356 = CARTESIAN_POINT('',(151.864037,-132.431613,-7.5E-02)); +#471357 = VECTOR('',#471358,1.); +#471358 = DIRECTION('',(0.707108036965,0.707105525406,0.)); +#471359 = PLANE('',#471360); +#471360 = AXIS2_PLACEMENT_3D('',#471361,#471362,#471363); +#471361 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471362 = DIRECTION('',(-0.,-0.,-1.)); +#471363 = DIRECTION('',(-1.,0.,0.)); +#471364 = SHELL_BASED_SURFACE_MODEL('',(#471365)); +#471365 = OPEN_SHELL('',(#471366)); +#471366 = ADVANCED_FACE('',(#471367),#471461,.T.); +#471367 = FACE_BOUND('',#471368,.T.); +#471368 = EDGE_LOOP('',(#471369,#471380,#471388,#471397,#471405,#471414, + #471422,#471431,#471439,#471447,#471455)); +#471369 = ORIENTED_EDGE('',*,*,#471370,.T.); +#471370 = EDGE_CURVE('',#471371,#471373,#471375,.T.); +#471371 = VERTEX_POINT('',#471372); +#471372 = CARTESIAN_POINT('',(153.386618,-132.140555,-7.5E-02)); +#471373 = VERTEX_POINT('',#471374); +#471374 = CARTESIAN_POINT('',(153.405752,-132.044361,-7.5E-02)); +#471375 = CIRCLE('',#471376,4.999998452108E-02); +#471376 = AXIS2_PLACEMENT_3D('',#471377,#471378,#471379); +#471377 = CARTESIAN_POINT('',(153.40575203736,-132.0943609845,-7.5E-02) + ); +#471378 = DIRECTION('',(0.,0.,-1.)); +#471379 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#471380 = ORIENTED_EDGE('',*,*,#471381,.T.); +#471381 = EDGE_CURVE('',#471373,#471382,#471384,.T.); +#471382 = VERTEX_POINT('',#471383); +#471383 = CARTESIAN_POINT('',(154.072419,-132.044361,-7.5E-02)); +#471384 = LINE('',#471385,#471386); +#471385 = CARTESIAN_POINT('',(153.405752,-132.044361,-7.5E-02)); +#471386 = VECTOR('',#471387,1.); +#471387 = DIRECTION('',(1.,0.,0.)); +#471388 = ORIENTED_EDGE('',*,*,#471389,.T.); +#471389 = EDGE_CURVE('',#471382,#471390,#471392,.T.); +#471390 = VERTEX_POINT('',#471391); +#471391 = CARTESIAN_POINT('',(154.072419,-132.144361,-7.5E-02)); +#471392 = CIRCLE('',#471393,5.000000000002E-02); +#471393 = AXIS2_PLACEMENT_3D('',#471394,#471395,#471396); +#471394 = CARTESIAN_POINT('',(154.07241895228,-132.094361,-7.5E-02)); +#471395 = DIRECTION('',(0.,0.,-1.)); +#471396 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#471397 = ORIENTED_EDGE('',*,*,#471398,.T.); +#471398 = EDGE_CURVE('',#471390,#471399,#471401,.T.); +#471399 = VERTEX_POINT('',#471400); +#471400 = CARTESIAN_POINT('',(153.608032,-132.144361,-7.5E-02)); +#471401 = LINE('',#471402,#471403); +#471402 = CARTESIAN_POINT('',(154.072419,-132.144361,-7.5E-02)); +#471403 = VECTOR('',#471404,1.); +#471404 = DIRECTION('',(-1.,0.,0.)); +#471405 = ORIENTED_EDGE('',*,*,#471406,.T.); +#471406 = EDGE_CURVE('',#471399,#471407,#471409,.T.); +#471407 = VERTEX_POINT('',#471408); +#471408 = CARTESIAN_POINT('',(153.455752,-132.29664,-7.5E-02)); +#471409 = CIRCLE('',#471410,0.215060043145); +#471410 = AXIS2_PLACEMENT_3D('',#471411,#471412,#471413); +#471411 = CARTESIAN_POINT('',(153.66352799719,-132.3521373616,-7.5E-02) + ); +#471412 = DIRECTION('',(0.,0.,1.)); +#471413 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#471414 = ORIENTED_EDGE('',*,*,#471415,.T.); +#471415 = EDGE_CURVE('',#471407,#471416,#471418,.T.); +#471416 = VERTEX_POINT('',#471417); +#471417 = CARTESIAN_POINT('',(153.455752,-132.380075,-7.5E-02)); +#471418 = LINE('',#471419,#471420); +#471419 = CARTESIAN_POINT('',(153.455752,-132.29664,-7.5E-02)); +#471420 = VECTOR('',#471421,1.); +#471421 = DIRECTION('',(0.,-1.,0.)); +#471422 = ORIENTED_EDGE('',*,*,#471423,.T.); +#471423 = EDGE_CURVE('',#471416,#471424,#471426,.T.); +#471424 = VERTEX_POINT('',#471425); +#471425 = CARTESIAN_POINT('',(153.355752,-132.380075,-7.5E-02)); +#471426 = CIRCLE('',#471427,5.000000000003E-02); +#471427 = AXIS2_PLACEMENT_3D('',#471428,#471429,#471430); +#471428 = CARTESIAN_POINT('',(153.405752,-132.3800749522,-7.5E-02)); +#471429 = DIRECTION('',(-0.,0.,-1.)); +#471430 = DIRECTION('',(1.,-9.54237293626E-07,-0.)); +#471431 = ORIENTED_EDGE('',*,*,#471432,.T.); +#471432 = EDGE_CURVE('',#471424,#471433,#471435,.T.); +#471433 = VERTEX_POINT('',#471434); +#471434 = CARTESIAN_POINT('',(153.357994,-132.273564,-7.5E-02)); +#471435 = LINE('',#471436,#471437); +#471436 = CARTESIAN_POINT('',(153.355752,-132.380075,-7.5E-02)); +#471437 = VECTOR('',#471438,1.); +#471438 = DIRECTION('',(2.104480731703E-02,0.999778533519,0.)); +#471439 = ORIENTED_EDGE('',*,*,#471440,.T.); +#471440 = EDGE_CURVE('',#471433,#471441,#471443,.T.); +#471441 = VERTEX_POINT('',#471442); +#471442 = CARTESIAN_POINT('',(153.418016,-132.154244,-7.5E-02)); +#471443 = LINE('',#471444,#471445); +#471444 = CARTESIAN_POINT('',(153.357994,-132.273564,-7.5E-02)); +#471445 = VECTOR('',#471446,1.); +#471446 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#471447 = ORIENTED_EDGE('',*,*,#471448,.T.); +#471448 = EDGE_CURVE('',#471441,#471449,#471451,.T.); +#471449 = VERTEX_POINT('',#471450); +#471450 = CARTESIAN_POINT('',(153.427899,-132.144361,-7.5E-02)); +#471451 = LINE('',#471452,#471453); +#471452 = CARTESIAN_POINT('',(153.418016,-132.154244,-7.5E-02)); +#471453 = VECTOR('',#471454,1.); +#471454 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#471455 = ORIENTED_EDGE('',*,*,#471456,.T.); +#471456 = EDGE_CURVE('',#471449,#471371,#471457,.T.); +#471457 = LINE('',#471458,#471459); +#471458 = CARTESIAN_POINT('',(153.427899,-132.144361,-7.5E-02)); +#471459 = VECTOR('',#471460,1.); +#471460 = DIRECTION('',(-0.995776727161,9.180800425308E-02,0.)); +#471461 = PLANE('',#471462); +#471462 = AXIS2_PLACEMENT_3D('',#471463,#471464,#471465); +#471463 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471464 = DIRECTION('',(-0.,-0.,-1.)); +#471465 = DIRECTION('',(-1.,0.,0.)); +#471466 = SHELL_BASED_SURFACE_MODEL('',(#471467)); +#471467 = OPEN_SHELL('',(#471468)); +#471468 = ADVANCED_FACE('',(#471469),#471538,.T.); +#471469 = FACE_BOUND('',#471470,.T.); +#471470 = EDGE_LOOP('',(#471471,#471482,#471490,#471498,#471507,#471515, + #471524,#471532)); +#471471 = ORIENTED_EDGE('',*,*,#471472,.T.); +#471472 = EDGE_CURVE('',#471473,#471475,#471477,.T.); +#471473 = VERTEX_POINT('',#471474); +#471474 = CARTESIAN_POINT('',(145.909567,-130.804539,-7.5E-02)); +#471475 = VERTEX_POINT('',#471476); +#471476 = CARTESIAN_POINT('',(146.025,-130.8275,-7.5E-02)); +#471477 = CIRCLE('',#471478,6.000007318647E-02); +#471478 = AXIS2_PLACEMENT_3D('',#471479,#471480,#471481); +#471479 = CARTESIAN_POINT('',(145.96499992681,-130.8274998233,-7.5E-02) + ); +#471480 = DIRECTION('',(0.,0.,-1.)); +#471481 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#471482 = ORIENTED_EDGE('',*,*,#471483,.T.); +#471483 = EDGE_CURVE('',#471475,#471484,#471486,.T.); +#471484 = VERTEX_POINT('',#471485); +#471485 = CARTESIAN_POINT('',(146.025,-132.2375,-7.5E-02)); +#471486 = LINE('',#471487,#471488); +#471487 = CARTESIAN_POINT('',(146.025,-130.8275,-7.5E-02)); +#471488 = VECTOR('',#471489,1.); +#471489 = DIRECTION('',(0.,-1.,0.)); +#471490 = ORIENTED_EDGE('',*,*,#471491,.T.); +#471491 = EDGE_CURVE('',#471484,#471492,#471494,.T.); +#471492 = VERTEX_POINT('',#471493); +#471493 = CARTESIAN_POINT('',(146.615,-132.2375,-7.5E-02)); +#471494 = LINE('',#471495,#471496); +#471495 = CARTESIAN_POINT('',(146.025,-132.2375,-7.5E-02)); +#471496 = VECTOR('',#471497,1.); +#471497 = DIRECTION('',(1.,0.,0.)); +#471498 = ORIENTED_EDGE('',*,*,#471499,.T.); +#471499 = EDGE_CURVE('',#471492,#471500,#471502,.T.); +#471500 = VERTEX_POINT('',#471501); +#471501 = CARTESIAN_POINT('',(146.615,-132.3575,-7.5E-02)); +#471502 = CIRCLE('',#471503,6.000000000041E-02); +#471503 = AXIS2_PLACEMENT_3D('',#471504,#471505,#471506); +#471504 = CARTESIAN_POINT('',(146.61500022558,-132.2975,-7.5E-02)); +#471505 = DIRECTION('',(0.,0.,-1.)); +#471506 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#471507 = ORIENTED_EDGE('',*,*,#471508,.T.); +#471508 = EDGE_CURVE('',#471500,#471509,#471511,.T.); +#471509 = VERTEX_POINT('',#471510); +#471510 = CARTESIAN_POINT('',(145.965,-132.3575,-7.5E-02)); +#471511 = LINE('',#471512,#471513); +#471512 = CARTESIAN_POINT('',(146.615,-132.3575,-7.5E-02)); +#471513 = VECTOR('',#471514,1.); +#471514 = DIRECTION('',(-1.,0.,0.)); +#471515 = ORIENTED_EDGE('',*,*,#471516,.T.); +#471516 = EDGE_CURVE('',#471509,#471517,#471519,.T.); +#471517 = VERTEX_POINT('',#471518); +#471518 = CARTESIAN_POINT('',(145.905,-132.2975,-7.5E-02)); +#471519 = CIRCLE('',#471520,5.999932016253E-02); +#471520 = AXIS2_PLACEMENT_3D('',#471521,#471522,#471523); +#471521 = CARTESIAN_POINT('',(145.96499932015,-132.2975006798,-7.5E-02) + ); +#471522 = DIRECTION('',(0.,0.,-1.)); +#471523 = DIRECTION('',(1.133081706884E-05,-0.999999999936,0.)); +#471524 = ORIENTED_EDGE('',*,*,#471525,.T.); +#471525 = EDGE_CURVE('',#471517,#471526,#471528,.T.); +#471526 = VERTEX_POINT('',#471527); +#471527 = CARTESIAN_POINT('',(145.905,-130.8275,-7.5E-02)); +#471528 = LINE('',#471529,#471530); +#471529 = CARTESIAN_POINT('',(145.905,-132.2975,-7.5E-02)); +#471530 = VECTOR('',#471531,1.); +#471531 = DIRECTION('',(0.,1.,0.)); +#471532 = ORIENTED_EDGE('',*,*,#471533,.T.); +#471533 = EDGE_CURVE('',#471526,#471473,#471534,.T.); +#471534 = LINE('',#471535,#471536); +#471535 = CARTESIAN_POINT('',(145.905,-130.8275,-7.5E-02)); +#471536 = VECTOR('',#471537,1.); +#471537 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#471538 = PLANE('',#471539); +#471539 = AXIS2_PLACEMENT_3D('',#471540,#471541,#471542); +#471540 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471541 = DIRECTION('',(-0.,-0.,-1.)); +#471542 = DIRECTION('',(-1.,0.,0.)); +#471543 = SHELL_BASED_SURFACE_MODEL('',(#471544)); +#471544 = OPEN_SHELL('',(#471545)); +#471545 = ADVANCED_FACE('',(#471546),#471615,.T.); +#471546 = FACE_BOUND('',#471547,.T.); +#471547 = EDGE_LOOP('',(#471548,#471559,#471567,#471576,#471584,#471593, + #471601,#471609)); +#471548 = ORIENTED_EDGE('',*,*,#471549,.T.); +#471549 = EDGE_CURVE('',#471550,#471552,#471554,.T.); +#471550 = VERTEX_POINT('',#471551); +#471551 = CARTESIAN_POINT('',(148.179567,-130.804539,-7.5E-02)); +#471552 = VERTEX_POINT('',#471553); +#471553 = CARTESIAN_POINT('',(148.295,-130.8275,-7.5E-02)); +#471554 = CIRCLE('',#471555,6.000007318647E-02); +#471555 = AXIS2_PLACEMENT_3D('',#471556,#471557,#471558); +#471556 = CARTESIAN_POINT('',(148.23499992681,-130.8274998233,-7.5E-02) + ); +#471557 = DIRECTION('',(0.,0.,-1.)); +#471558 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#471559 = ORIENTED_EDGE('',*,*,#471560,.T.); +#471560 = EDGE_CURVE('',#471552,#471561,#471563,.T.); +#471561 = VERTEX_POINT('',#471562); +#471562 = CARTESIAN_POINT('',(148.295,-132.2975,-7.5E-02)); +#471563 = LINE('',#471564,#471565); +#471564 = CARTESIAN_POINT('',(148.295,-130.8275,-7.5E-02)); +#471565 = VECTOR('',#471566,1.); +#471566 = DIRECTION('',(0.,-1.,0.)); +#471567 = ORIENTED_EDGE('',*,*,#471568,.T.); +#471568 = EDGE_CURVE('',#471561,#471569,#471571,.T.); +#471569 = VERTEX_POINT('',#471570); +#471570 = CARTESIAN_POINT('',(148.235,-132.3575,-7.5E-02)); +#471571 = CIRCLE('',#471572,5.99993201625E-02); +#471572 = AXIS2_PLACEMENT_3D('',#471573,#471574,#471575); +#471573 = CARTESIAN_POINT('',(148.23500067984,-132.2975006798,-7.5E-02) + ); +#471574 = DIRECTION('',(0.,0.,-1.)); +#471575 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#471576 = ORIENTED_EDGE('',*,*,#471577,.T.); +#471577 = EDGE_CURVE('',#471569,#471578,#471580,.T.); +#471578 = VERTEX_POINT('',#471579); +#471579 = CARTESIAN_POINT('',(147.585,-132.3575,-7.5E-02)); +#471580 = LINE('',#471581,#471582); +#471581 = CARTESIAN_POINT('',(148.235,-132.3575,-7.5E-02)); +#471582 = VECTOR('',#471583,1.); +#471583 = DIRECTION('',(-1.,0.,0.)); +#471584 = ORIENTED_EDGE('',*,*,#471585,.T.); +#471585 = EDGE_CURVE('',#471578,#471586,#471588,.T.); +#471586 = VERTEX_POINT('',#471587); +#471587 = CARTESIAN_POINT('',(147.585,-132.2375,-7.5E-02)); +#471588 = CIRCLE('',#471589,6.000000000041E-02); +#471589 = AXIS2_PLACEMENT_3D('',#471590,#471591,#471592); +#471590 = CARTESIAN_POINT('',(147.58499977441,-132.2975,-7.5E-02)); +#471591 = DIRECTION('',(0.,0.,-1.)); +#471592 = DIRECTION('',(3.759794727379E-06,-0.999999999993,0.)); +#471593 = ORIENTED_EDGE('',*,*,#471594,.T.); +#471594 = EDGE_CURVE('',#471586,#471595,#471597,.T.); +#471595 = VERTEX_POINT('',#471596); +#471596 = CARTESIAN_POINT('',(148.175,-132.2375,-7.5E-02)); +#471597 = LINE('',#471598,#471599); +#471598 = CARTESIAN_POINT('',(147.585,-132.2375,-7.5E-02)); +#471599 = VECTOR('',#471600,1.); +#471600 = DIRECTION('',(1.,0.,0.)); +#471601 = ORIENTED_EDGE('',*,*,#471602,.T.); +#471602 = EDGE_CURVE('',#471595,#471603,#471605,.T.); +#471603 = VERTEX_POINT('',#471604); +#471604 = CARTESIAN_POINT('',(148.175,-130.8275,-7.5E-02)); +#471605 = LINE('',#471606,#471607); +#471606 = CARTESIAN_POINT('',(148.175,-132.2375,-7.5E-02)); +#471607 = VECTOR('',#471608,1.); +#471608 = DIRECTION('',(0.,1.,0.)); +#471609 = ORIENTED_EDGE('',*,*,#471610,.T.); +#471610 = EDGE_CURVE('',#471603,#471550,#471611,.T.); +#471611 = LINE('',#471612,#471613); +#471612 = CARTESIAN_POINT('',(148.175,-130.8275,-7.5E-02)); +#471613 = VECTOR('',#471614,1.); +#471614 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#471615 = PLANE('',#471616); +#471616 = AXIS2_PLACEMENT_3D('',#471617,#471618,#471619); +#471617 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471618 = DIRECTION('',(-0.,-0.,-1.)); +#471619 = DIRECTION('',(-1.,0.,0.)); +#471620 = SHELL_BASED_SURFACE_MODEL('',(#471621)); +#471621 = OPEN_SHELL('',(#471622)); +#471622 = ADVANCED_FACE('',(#471623,#471803),#471854,.T.); +#471623 = FACE_BOUND('',#471624,.T.); +#471624 = EDGE_LOOP('',(#471625,#471635,#471643,#471651,#471659,#471667, + #471675,#471683,#471691,#471700,#471708,#471716,#471724,#471732, + #471740,#471748,#471756,#471764,#471772,#471780,#471788,#471797)); +#471625 = ORIENTED_EDGE('',*,*,#471626,.T.); +#471626 = EDGE_CURVE('',#471627,#471629,#471631,.T.); +#471627 = VERTEX_POINT('',#471628); +#471628 = CARTESIAN_POINT('',(153.43101,-131.192497,-7.5E-02)); +#471629 = VERTEX_POINT('',#471630); +#471630 = CARTESIAN_POINT('',(153.537336,-131.141841,-7.5E-02)); +#471631 = LINE('',#471632,#471633); +#471632 = CARTESIAN_POINT('',(153.43101,-131.192497,-7.5E-02)); +#471633 = VECTOR('',#471634,1.); +#471634 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#471635 = ORIENTED_EDGE('',*,*,#471636,.T.); +#471636 = EDGE_CURVE('',#471629,#471637,#471639,.T.); +#471637 = VERTEX_POINT('',#471638); +#471638 = CARTESIAN_POINT('',(153.932017,-131.140087,-7.5E-02)); +#471639 = LINE('',#471640,#471641); +#471640 = CARTESIAN_POINT('',(153.537336,-131.141841,-7.5E-02)); +#471641 = VECTOR('',#471642,1.); +#471642 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#471643 = ORIENTED_EDGE('',*,*,#471644,.T.); +#471644 = EDGE_CURVE('',#471637,#471645,#471647,.T.); +#471645 = VERTEX_POINT('',#471646); +#471646 = CARTESIAN_POINT('',(153.951921,-131.144878,-7.5E-02)); +#471647 = LINE('',#471648,#471649); +#471648 = CARTESIAN_POINT('',(153.932017,-131.140087,-7.5E-02)); +#471649 = VECTOR('',#471650,1.); +#471650 = DIRECTION('',(0.972231458314,-0.234021348312,0.)); +#471651 = ORIENTED_EDGE('',*,*,#471652,.T.); +#471652 = EDGE_CURVE('',#471645,#471653,#471655,.T.); +#471653 = VERTEX_POINT('',#471654); +#471654 = CARTESIAN_POINT('',(154.059751,-131.202268,-7.5E-02)); +#471655 = LINE('',#471656,#471657); +#471656 = CARTESIAN_POINT('',(153.951921,-131.144878,-7.5E-02)); +#471657 = VECTOR('',#471658,1.); +#471658 = DIRECTION('',(0.882758259516,-0.469827473927,0.)); +#471659 = ORIENTED_EDGE('',*,*,#471660,.T.); +#471660 = EDGE_CURVE('',#471653,#471661,#471663,.T.); +#471661 = VERTEX_POINT('',#471662); +#471662 = CARTESIAN_POINT('',(154.118613,-131.313322,-7.5E-02)); +#471663 = LINE('',#471664,#471665); +#471664 = CARTESIAN_POINT('',(154.059751,-131.202268,-7.5E-02)); +#471665 = VECTOR('',#471666,1.); +#471666 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#471667 = ORIENTED_EDGE('',*,*,#471668,.T.); +#471668 = EDGE_CURVE('',#471661,#471669,#471671,.T.); +#471669 = VERTEX_POINT('',#471670); +#471670 = CARTESIAN_POINT('',(154.122419,-131.332456,-7.5E-02)); +#471671 = LINE('',#471672,#471673); +#471672 = CARTESIAN_POINT('',(154.118613,-131.313322,-7.5E-02)); +#471673 = VECTOR('',#471674,1.); +#471674 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#471675 = ORIENTED_EDGE('',*,*,#471676,.T.); +#471676 = EDGE_CURVE('',#471669,#471677,#471679,.T.); +#471677 = VERTEX_POINT('',#471678); +#471678 = CARTESIAN_POINT('',(154.120176,-131.534204,-7.5E-02)); +#471679 = LINE('',#471680,#471681); +#471680 = CARTESIAN_POINT('',(154.122419,-131.332456,-7.5E-02)); +#471681 = VECTOR('',#471682,1.); +#471682 = DIRECTION('',(-1.111714311208E-02,-0.999938202655,0.)); +#471683 = ORIENTED_EDGE('',*,*,#471684,.T.); +#471684 = EDGE_CURVE('',#471677,#471685,#471687,.T.); +#471685 = VERTEX_POINT('',#471686); +#471686 = CARTESIAN_POINT('',(154.069521,-131.640531,-7.5E-02)); +#471687 = LINE('',#471688,#471689); +#471688 = CARTESIAN_POINT('',(154.120176,-131.534204,-7.5E-02)); +#471689 = VECTOR('',#471690,1.); +#471690 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#471691 = ORIENTED_EDGE('',*,*,#471692,.T.); +#471692 = EDGE_CURVE('',#471685,#471693,#471695,.T.); +#471693 = VERTEX_POINT('',#471694); +#471694 = CARTESIAN_POINT('',(153.980079,-131.595809,-7.5E-02)); +#471695 = CIRCLE('',#471696,4.999982161969E-02); +#471696 = AXIS2_PLACEMENT_3D('',#471697,#471698,#471699); +#471697 = CARTESIAN_POINT('',(154.02479999642,-131.6181700071,-7.5E-02) + ); +#471698 = DIRECTION('',(-0.,0.,-1.)); +#471699 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#471700 = ORIENTED_EDGE('',*,*,#471701,.T.); +#471701 = EDGE_CURVE('',#471693,#471702,#471704,.T.); +#471702 = VERTEX_POINT('',#471703); +#471703 = CARTESIAN_POINT('',(154.022419,-131.511128,-7.5E-02)); +#471704 = LINE('',#471705,#471706); +#471705 = CARTESIAN_POINT('',(153.980079,-131.595809,-7.5E-02)); +#471706 = VECTOR('',#471707,1.); +#471707 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#471708 = ORIENTED_EDGE('',*,*,#471709,.T.); +#471709 = EDGE_CURVE('',#471702,#471710,#471712,.T.); +#471710 = VERTEX_POINT('',#471711); +#471711 = CARTESIAN_POINT('',(154.022419,-131.344259,-7.5E-02)); +#471712 = LINE('',#471713,#471714); +#471713 = CARTESIAN_POINT('',(154.022419,-131.511128,-7.5E-02)); +#471714 = VECTOR('',#471715,1.); +#471715 = DIRECTION('',(0.,1.,0.)); +#471716 = ORIENTED_EDGE('',*,*,#471717,.T.); +#471717 = EDGE_CURVE('',#471710,#471718,#471720,.T.); +#471718 = VERTEX_POINT('',#471719); +#471719 = CARTESIAN_POINT('',(153.987532,-131.274485,-7.5E-02)); +#471720 = LINE('',#471721,#471722); +#471721 = CARTESIAN_POINT('',(154.022419,-131.344259,-7.5E-02)); +#471722 = VECTOR('',#471723,1.); +#471723 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#471724 = ORIENTED_EDGE('',*,*,#471725,.T.); +#471725 = EDGE_CURVE('',#471718,#471726,#471728,.T.); +#471726 = VERTEX_POINT('',#471727); +#471727 = CARTESIAN_POINT('',(153.917759,-131.239599,-7.5E-02)); +#471728 = LINE('',#471729,#471730); +#471729 = CARTESIAN_POINT('',(153.987532,-131.274485,-7.5E-02)); +#471730 = VECTOR('',#471731,1.); +#471731 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#471732 = ORIENTED_EDGE('',*,*,#471733,.T.); +#471733 = EDGE_CURVE('',#471726,#471734,#471736,.T.); +#471734 = VERTEX_POINT('',#471735); +#471735 = CARTESIAN_POINT('',(153.780075,-131.239599,-7.5E-02)); +#471736 = LINE('',#471737,#471738); +#471737 = CARTESIAN_POINT('',(153.917759,-131.239599,-7.5E-02)); +#471738 = VECTOR('',#471739,1.); +#471739 = DIRECTION('',(-1.,0.,0.)); +#471740 = ORIENTED_EDGE('',*,*,#471741,.T.); +#471741 = EDGE_CURVE('',#471734,#471742,#471744,.T.); +#471742 = VERTEX_POINT('',#471743); +#471743 = CARTESIAN_POINT('',(153.688261,-131.686702,-7.5E-02)); +#471744 = LINE('',#471745,#471746); +#471745 = CARTESIAN_POINT('',(153.780075,-131.239599,-7.5E-02)); +#471746 = VECTOR('',#471747,1.); +#471747 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#471748 = ORIENTED_EDGE('',*,*,#471749,.T.); +#471749 = EDGE_CURVE('',#471742,#471750,#471752,.T.); +#471750 = VERTEX_POINT('',#471751); +#471751 = CARTESIAN_POINT('',(153.662981,-131.711983,-7.5E-02)); +#471752 = LINE('',#471753,#471754); +#471753 = CARTESIAN_POINT('',(153.688261,-131.686702,-7.5E-02)); +#471754 = VECTOR('',#471755,1.); +#471755 = DIRECTION('',(-0.707092795827,-0.70712076627,0.)); +#471756 = ORIENTED_EDGE('',*,*,#471757,.T.); +#471757 = EDGE_CURVE('',#471750,#471758,#471760,.T.); +#471758 = VERTEX_POINT('',#471759); +#471759 = CARTESIAN_POINT('',(153.643847,-131.715789,-7.5E-02)); +#471760 = LINE('',#471761,#471762); +#471761 = CARTESIAN_POINT('',(153.662981,-131.711983,-7.5E-02)); +#471762 = VECTOR('',#471763,1.); +#471763 = DIRECTION('',(-0.980785174845,-0.195090852694,0.)); +#471764 = ORIENTED_EDGE('',*,*,#471765,.T.); +#471765 = EDGE_CURVE('',#471758,#471766,#471768,.T.); +#471766 = VERTEX_POINT('',#471767); +#471767 = CARTESIAN_POINT('',(153.537336,-131.713546,-7.5E-02)); +#471768 = LINE('',#471769,#471770); +#471769 = CARTESIAN_POINT('',(153.643847,-131.715789,-7.5E-02)); +#471770 = VECTOR('',#471771,1.); +#471771 = DIRECTION('',(-0.999778335979,2.10541897794E-02,0.)); +#471772 = ORIENTED_EDGE('',*,*,#471773,.T.); +#471773 = EDGE_CURVE('',#471766,#471774,#471776,.T.); +#471774 = VERTEX_POINT('',#471775); +#471775 = CARTESIAN_POINT('',(153.420611,-131.655942,-7.5E-02)); +#471776 = LINE('',#471777,#471778); +#471777 = CARTESIAN_POINT('',(153.537336,-131.713546,-7.5E-02)); +#471778 = VECTOR('',#471779,1.); +#471779 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#471780 = ORIENTED_EDGE('',*,*,#471781,.T.); +#471781 = EDGE_CURVE('',#471774,#471782,#471784,.T.); +#471782 = VERTEX_POINT('',#471783); +#471783 = CARTESIAN_POINT('',(153.408649,-131.64053,-7.5E-02)); +#471784 = LINE('',#471785,#471786); +#471785 = CARTESIAN_POINT('',(153.420611,-131.655942,-7.5E-02)); +#471786 = VECTOR('',#471787,1.); +#471787 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#471788 = ORIENTED_EDGE('',*,*,#471789,.T.); +#471789 = EDGE_CURVE('',#471782,#471790,#471792,.T.); +#471790 = VERTEX_POINT('',#471791); +#471791 = CARTESIAN_POINT('',(153.415598,-131.204458,-7.5E-02)); +#471792 = CIRCLE('',#471793,0.376597301495); +#471793 = AXIS2_PLACEMENT_3D('',#471794,#471795,#471796); +#471794 = CARTESIAN_POINT('',(153.71912484267,-131.427386202,-7.5E-02)); +#471795 = DIRECTION('',(0.,0.,-1.)); +#471796 = DIRECTION('',(-0.824423970765,-0.565972717034,-0.)); +#471797 = ORIENTED_EDGE('',*,*,#471798,.T.); +#471798 = EDGE_CURVE('',#471790,#471627,#471799,.T.); +#471799 = LINE('',#471800,#471801); +#471800 = CARTESIAN_POINT('',(153.415598,-131.204458,-7.5E-02)); +#471801 = VECTOR('',#471802,1.); +#471802 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#471803 = FACE_BOUND('',#471804,.T.); +#471804 = EDGE_LOOP('',(#471805,#471815,#471823,#471831,#471840,#471848) + ); +#471805 = ORIENTED_EDGE('',*,*,#471806,.T.); +#471806 = EDGE_CURVE('',#471807,#471809,#471811,.T.); +#471807 = VERTEX_POINT('',#471808); +#471808 = CARTESIAN_POINT('',(153.602857,-131.615789,-7.5E-02)); +#471809 = VERTEX_POINT('',#471810); +#471810 = CARTESIAN_POINT('',(153.678095,-131.239599,-7.5E-02)); +#471811 = LINE('',#471812,#471813); +#471812 = CARTESIAN_POINT('',(153.602857,-131.615789,-7.5E-02)); +#471813 = VECTOR('',#471814,1.); +#471814 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#471815 = ORIENTED_EDGE('',*,*,#471816,.T.); +#471816 = EDGE_CURVE('',#471809,#471817,#471819,.T.); +#471817 = VERTEX_POINT('',#471818); +#471818 = CARTESIAN_POINT('',(153.560413,-131.239599,-7.5E-02)); +#471819 = LINE('',#471820,#471821); +#471820 = CARTESIAN_POINT('',(153.678095,-131.239599,-7.5E-02)); +#471821 = VECTOR('',#471822,1.); +#471822 = DIRECTION('',(-1.,0.,0.)); +#471823 = ORIENTED_EDGE('',*,*,#471824,.T.); +#471824 = EDGE_CURVE('',#471817,#471825,#471827,.T.); +#471825 = VERTEX_POINT('',#471826); +#471826 = CARTESIAN_POINT('',(153.490638,-131.274485,-7.5E-02)); +#471827 = LINE('',#471828,#471829); +#471828 = CARTESIAN_POINT('',(153.560413,-131.239599,-7.5E-02)); +#471829 = VECTOR('',#471830,1.); +#471830 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#471831 = ORIENTED_EDGE('',*,*,#471832,.T.); +#471832 = EDGE_CURVE('',#471825,#471833,#471835,.T.); +#471833 = VERTEX_POINT('',#471834); +#471834 = CARTESIAN_POINT('',(153.490638,-131.580902,-7.5E-02)); +#471835 = CIRCLE('',#471836,0.26744056971); +#471836 = AXIS2_PLACEMENT_3D('',#471837,#471838,#471839); +#471837 = CARTESIAN_POINT('',(153.70984478332,-131.4276935,-7.5E-02)); +#471838 = DIRECTION('',(0.,0.,1.)); +#471839 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#471840 = ORIENTED_EDGE('',*,*,#471841,.T.); +#471841 = EDGE_CURVE('',#471833,#471842,#471844,.T.); +#471842 = VERTEX_POINT('',#471843); +#471843 = CARTESIAN_POINT('',(153.560413,-131.615789,-7.5E-02)); +#471844 = LINE('',#471845,#471846); +#471845 = CARTESIAN_POINT('',(153.490638,-131.580902,-7.5E-02)); +#471846 = VECTOR('',#471847,1.); +#471847 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#471848 = ORIENTED_EDGE('',*,*,#471849,.T.); +#471849 = EDGE_CURVE('',#471842,#471807,#471850,.T.); +#471850 = LINE('',#471851,#471852); +#471851 = CARTESIAN_POINT('',(153.560413,-131.615789,-7.5E-02)); +#471852 = VECTOR('',#471853,1.); +#471853 = DIRECTION('',(1.,0.,0.)); +#471854 = PLANE('',#471855); +#471855 = AXIS2_PLACEMENT_3D('',#471856,#471857,#471858); +#471856 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471857 = DIRECTION('',(-0.,-0.,-1.)); +#471858 = DIRECTION('',(-1.,0.,0.)); +#471859 = SHELL_BASED_SURFACE_MODEL('',(#471860)); +#471860 = OPEN_SHELL('',(#471861)); +#471861 = ADVANCED_FACE('',(#471862),#471960,.T.); +#471862 = FACE_BOUND('',#471863,.T.); +#471863 = EDGE_LOOP('',(#471864,#471874,#471882,#471890,#471898,#471906, + #471914,#471922,#471930,#471938,#471946,#471954)); +#471864 = ORIENTED_EDGE('',*,*,#471865,.T.); +#471865 = EDGE_CURVE('',#471866,#471868,#471870,.T.); +#471866 = VERTEX_POINT('',#471867); +#471867 = CARTESIAN_POINT('',(152.321042,-131.5038,-7.5E-02)); +#471868 = VERTEX_POINT('',#471869); +#471869 = CARTESIAN_POINT('',(152.379501,-131.43996,-7.5E-02)); +#471870 = LINE('',#471871,#471872); +#471871 = CARTESIAN_POINT('',(152.321042,-131.5038,-7.5E-02)); +#471872 = VECTOR('',#471873,1.); +#471873 = DIRECTION('',(0.675341608062,0.73750505925,0.)); +#471874 = ORIENTED_EDGE('',*,*,#471875,.T.); +#471875 = EDGE_CURVE('',#471868,#471876,#471878,.T.); +#471876 = VERTEX_POINT('',#471877); +#471877 = CARTESIAN_POINT('',(152.395722,-131.429122,-7.5E-02)); +#471878 = LINE('',#471879,#471880); +#471879 = CARTESIAN_POINT('',(152.379501,-131.43996,-7.5E-02)); +#471880 = VECTOR('',#471881,1.); +#471881 = DIRECTION('',(0.831482059726,0.555551603682,0.)); +#471882 = ORIENTED_EDGE('',*,*,#471883,.T.); +#471883 = EDGE_CURVE('',#471876,#471884,#471886,.T.); +#471884 = VERTEX_POINT('',#471885); +#471885 = CARTESIAN_POINT('',(152.433993,-131.429124,-7.5E-02)); +#471886 = LINE('',#471887,#471888); +#471887 = CARTESIAN_POINT('',(152.395722,-131.429122,-7.5E-02)); +#471888 = VECTOR('',#471889,1.); +#471889 = DIRECTION('',(0.999999998635,-5.225889034048E-05,0.)); +#471890 = ORIENTED_EDGE('',*,*,#471891,.T.); +#471891 = EDGE_CURVE('',#471884,#471892,#471894,.T.); +#471892 = VERTEX_POINT('',#471893); +#471893 = CARTESIAN_POINT('',(152.49783,-131.487579,-7.5E-02)); +#471894 = LINE('',#471895,#471896); +#471895 = CARTESIAN_POINT('',(152.433993,-131.429124,-7.5E-02)); +#471896 = VECTOR('',#471897,1.); +#471897 = DIRECTION('',(0.737512268458,-0.675333735181,0.)); +#471898 = ORIENTED_EDGE('',*,*,#471899,.T.); +#471899 = EDGE_CURVE('',#471892,#471900,#471902,.T.); +#471900 = VERTEX_POINT('',#471901); +#471901 = CARTESIAN_POINT('',(152.508669,-131.503801,-7.5E-02)); +#471902 = LINE('',#471903,#471904); +#471903 = CARTESIAN_POINT('',(152.49783,-131.487579,-7.5E-02)); +#471904 = VECTOR('',#471905,1.); +#471905 = DIRECTION('',(0.555563363344,-0.831474202432,0.)); +#471906 = ORIENTED_EDGE('',*,*,#471907,.T.); +#471907 = EDGE_CURVE('',#471900,#471908,#471910,.T.); +#471908 = VERTEX_POINT('',#471909); +#471909 = CARTESIAN_POINT('',(152.508669,-131.54207,-7.5E-02)); +#471910 = LINE('',#471911,#471912); +#471911 = CARTESIAN_POINT('',(152.508669,-131.503801,-7.5E-02)); +#471912 = VECTOR('',#471913,1.); +#471913 = DIRECTION('',(0.,-1.,0.)); +#471914 = ORIENTED_EDGE('',*,*,#471915,.T.); +#471915 = EDGE_CURVE('',#471908,#471916,#471918,.T.); +#471916 = VERTEX_POINT('',#471917); +#471917 = CARTESIAN_POINT('',(152.450211,-131.605909,-7.5E-02)); +#471918 = LINE('',#471919,#471920); +#471919 = CARTESIAN_POINT('',(152.508669,-131.54207,-7.5E-02)); +#471920 = VECTOR('',#471921,1.); +#471921 = DIRECTION('',(-0.675341078424,-0.737505544246,0.)); +#471922 = ORIENTED_EDGE('',*,*,#471923,.T.); +#471923 = EDGE_CURVE('',#471916,#471924,#471926,.T.); +#471924 = VERTEX_POINT('',#471925); +#471925 = CARTESIAN_POINT('',(152.43399,-131.616748,-7.5E-02)); +#471926 = LINE('',#471927,#471928); +#471927 = CARTESIAN_POINT('',(152.450211,-131.605909,-7.5E-02)); +#471928 = VECTOR('',#471929,1.); +#471929 = DIRECTION('',(-0.831458381235,-0.555587041132,0.)); +#471930 = ORIENTED_EDGE('',*,*,#471931,.T.); +#471931 = EDGE_CURVE('',#471924,#471932,#471934,.T.); +#471932 = VERTEX_POINT('',#471933); +#471933 = CARTESIAN_POINT('',(152.395722,-131.616748,-7.5E-02)); +#471934 = LINE('',#471935,#471936); +#471935 = CARTESIAN_POINT('',(152.43399,-131.616748,-7.5E-02)); +#471936 = VECTOR('',#471937,1.); +#471937 = DIRECTION('',(-1.,0.,0.)); +#471938 = ORIENTED_EDGE('',*,*,#471939,.T.); +#471939 = EDGE_CURVE('',#471932,#471940,#471942,.T.); +#471940 = VERTEX_POINT('',#471941); +#471941 = CARTESIAN_POINT('',(152.331881,-131.558291,-7.5E-02)); +#471942 = LINE('',#471943,#471944); +#471943 = CARTESIAN_POINT('',(152.395722,-131.616748,-7.5E-02)); +#471944 = VECTOR('',#471945,1.); +#471945 = DIRECTION('',(-0.737521835787,0.675323286832,0.)); +#471946 = ORIENTED_EDGE('',*,*,#471947,.T.); +#471947 = EDGE_CURVE('',#471940,#471948,#471950,.T.); +#471948 = VERTEX_POINT('',#471949); +#471949 = CARTESIAN_POINT('',(152.321042,-131.54207,-7.5E-02)); +#471950 = LINE('',#471951,#471952); +#471951 = CARTESIAN_POINT('',(152.331881,-131.558291,-7.5E-02)); +#471952 = VECTOR('',#471953,1.); +#471953 = DIRECTION('',(-0.555587041132,0.831458381235,0.)); +#471954 = ORIENTED_EDGE('',*,*,#471955,.T.); +#471955 = EDGE_CURVE('',#471948,#471866,#471956,.T.); +#471956 = LINE('',#471957,#471958); +#471957 = CARTESIAN_POINT('',(152.321042,-131.54207,-7.5E-02)); +#471958 = VECTOR('',#471959,1.); +#471959 = DIRECTION('',(0.,1.,0.)); +#471960 = PLANE('',#471961); +#471961 = AXIS2_PLACEMENT_3D('',#471962,#471963,#471964); +#471962 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#471963 = DIRECTION('',(-0.,-0.,-1.)); +#471964 = DIRECTION('',(-1.,0.,0.)); +#471965 = SHELL_BASED_SURFACE_MODEL('',(#471966)); +#471966 = OPEN_SHELL('',(#471967)); +#471967 = ADVANCED_FACE('',(#471968),#472012,.T.); +#471968 = FACE_BOUND('',#471969,.T.); +#471969 = EDGE_LOOP('',(#471970,#471981,#471989,#471998,#472006)); +#471970 = ORIENTED_EDGE('',*,*,#471971,.T.); +#471971 = EDGE_CURVE('',#471972,#471974,#471976,.T.); +#471972 = VERTEX_POINT('',#471973); +#471973 = CARTESIAN_POINT('',(149.814567,-130.973398,-7.5E-02)); +#471974 = VERTEX_POINT('',#471975); +#471975 = CARTESIAN_POINT('',(149.93,-130.996359,-7.5E-02)); +#471976 = CIRCLE('',#471977,6.000007318646E-02); +#471977 = AXIS2_PLACEMENT_3D('',#471978,#471979,#471980); +#471978 = CARTESIAN_POINT('',(149.86999992681,-130.9963588233,-7.5E-02) + ); +#471979 = DIRECTION('',(0.,0.,-1.)); +#471980 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#471981 = ORIENTED_EDGE('',*,*,#471982,.T.); +#471982 = EDGE_CURVE('',#471974,#471983,#471985,.T.); +#471983 = VERTEX_POINT('',#471984); +#471984 = CARTESIAN_POINT('',(149.93,-131.303641,-7.5E-02)); +#471985 = LINE('',#471986,#471987); +#471986 = CARTESIAN_POINT('',(149.93,-130.996359,-7.5E-02)); +#471987 = VECTOR('',#471988,1.); +#471988 = DIRECTION('',(0.,-1.,0.)); +#471989 = ORIENTED_EDGE('',*,*,#471990,.T.); +#471990 = EDGE_CURVE('',#471983,#471991,#471993,.T.); +#471991 = VERTEX_POINT('',#471992); +#471992 = CARTESIAN_POINT('',(149.81,-131.303641,-7.5E-02)); +#471993 = CIRCLE('',#471994,6.000000000042E-02); +#471994 = AXIS2_PLACEMENT_3D('',#471995,#471996,#471997); +#471995 = CARTESIAN_POINT('',(149.87,-131.3036412255,-7.5E-02)); +#471996 = DIRECTION('',(0.,0.,-1.)); +#471997 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#471998 = ORIENTED_EDGE('',*,*,#471999,.T.); +#471999 = EDGE_CURVE('',#471991,#472000,#472002,.T.); +#472000 = VERTEX_POINT('',#472001); +#472001 = CARTESIAN_POINT('',(149.81,-130.996359,-7.5E-02)); +#472002 = LINE('',#472003,#472004); +#472003 = CARTESIAN_POINT('',(149.81,-131.303641,-7.5E-02)); +#472004 = VECTOR('',#472005,1.); +#472005 = DIRECTION('',(0.,1.,0.)); +#472006 = ORIENTED_EDGE('',*,*,#472007,.T.); +#472007 = EDGE_CURVE('',#472000,#471972,#472008,.T.); +#472008 = LINE('',#472009,#472010); +#472009 = CARTESIAN_POINT('',(149.81,-130.996359,-7.5E-02)); +#472010 = VECTOR('',#472011,1.); +#472011 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#472012 = PLANE('',#472013); +#472013 = AXIS2_PLACEMENT_3D('',#472014,#472015,#472016); +#472014 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472015 = DIRECTION('',(-0.,-0.,-1.)); +#472016 = DIRECTION('',(-1.,0.,0.)); +#472017 = SHELL_BASED_SURFACE_MODEL('',(#472018)); +#472018 = OPEN_SHELL('',(#472019)); +#472019 = ADVANCED_FACE('',(#472020),#472064,.T.); +#472020 = FACE_BOUND('',#472021,.T.); +#472021 = EDGE_LOOP('',(#472022,#472033,#472041,#472050,#472058)); +#472022 = ORIENTED_EDGE('',*,*,#472023,.T.); +#472023 = EDGE_CURVE('',#472024,#472026,#472028,.T.); +#472024 = VERTEX_POINT('',#472025); +#472025 = CARTESIAN_POINT('',(150.574567,-130.973398,-7.5E-02)); +#472026 = VERTEX_POINT('',#472027); +#472027 = CARTESIAN_POINT('',(150.69,-130.996359,-7.5E-02)); +#472028 = CIRCLE('',#472029,6.000007318646E-02); +#472029 = AXIS2_PLACEMENT_3D('',#472030,#472031,#472032); +#472030 = CARTESIAN_POINT('',(150.62999992681,-130.9963588233,-7.5E-02) + ); +#472031 = DIRECTION('',(0.,0.,-1.)); +#472032 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#472033 = ORIENTED_EDGE('',*,*,#472034,.T.); +#472034 = EDGE_CURVE('',#472026,#472035,#472037,.T.); +#472035 = VERTEX_POINT('',#472036); +#472036 = CARTESIAN_POINT('',(150.69,-131.303641,-7.5E-02)); +#472037 = LINE('',#472038,#472039); +#472038 = CARTESIAN_POINT('',(150.69,-130.996359,-7.5E-02)); +#472039 = VECTOR('',#472040,1.); +#472040 = DIRECTION('',(0.,-1.,0.)); +#472041 = ORIENTED_EDGE('',*,*,#472042,.T.); +#472042 = EDGE_CURVE('',#472035,#472043,#472045,.T.); +#472043 = VERTEX_POINT('',#472044); +#472044 = CARTESIAN_POINT('',(150.57,-131.303641,-7.5E-02)); +#472045 = CIRCLE('',#472046,6.000000000042E-02); +#472046 = AXIS2_PLACEMENT_3D('',#472047,#472048,#472049); +#472047 = CARTESIAN_POINT('',(150.63,-131.3036412255,-7.5E-02)); +#472048 = DIRECTION('',(0.,0.,-1.)); +#472049 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#472050 = ORIENTED_EDGE('',*,*,#472051,.T.); +#472051 = EDGE_CURVE('',#472043,#472052,#472054,.T.); +#472052 = VERTEX_POINT('',#472053); +#472053 = CARTESIAN_POINT('',(150.57,-130.996359,-7.5E-02)); +#472054 = LINE('',#472055,#472056); +#472055 = CARTESIAN_POINT('',(150.57,-131.303641,-7.5E-02)); +#472056 = VECTOR('',#472057,1.); +#472057 = DIRECTION('',(0.,1.,0.)); +#472058 = ORIENTED_EDGE('',*,*,#472059,.T.); +#472059 = EDGE_CURVE('',#472052,#472024,#472060,.T.); +#472060 = LINE('',#472061,#472062); +#472061 = CARTESIAN_POINT('',(150.57,-130.996359,-7.5E-02)); +#472062 = VECTOR('',#472063,1.); +#472063 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#472064 = PLANE('',#472065); +#472065 = AXIS2_PLACEMENT_3D('',#472066,#472067,#472068); +#472066 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472067 = DIRECTION('',(-0.,-0.,-1.)); +#472068 = DIRECTION('',(-1.,0.,0.)); +#472069 = SHELL_BASED_SURFACE_MODEL('',(#472070)); +#472070 = OPEN_SHELL('',(#472071)); +#472071 = ADVANCED_FACE('',(#472072),#472190,.T.); +#472072 = FACE_BOUND('',#472073,.T.); +#472073 = EDGE_LOOP('',(#472074,#472085,#472093,#472101,#472109,#472117, + #472126,#472134,#472143,#472151,#472159,#472168,#472176,#472184)); +#472074 = ORIENTED_EDGE('',*,*,#472075,.T.); +#472075 = EDGE_CURVE('',#472076,#472078,#472080,.T.); +#472076 = VERTEX_POINT('',#472077); +#472077 = CARTESIAN_POINT('',(151.703467,-130.500575,-7.5E-02)); +#472078 = VERTEX_POINT('',#472079); +#472079 = CARTESIAN_POINT('',(151.79291,-130.545296,-7.5E-02)); +#472080 = CIRCLE('',#472081,5.000004522506E-02); +#472081 = AXIS2_PLACEMENT_3D('',#472082,#472083,#472084); +#472082 = CARTESIAN_POINT('',(151.74818853675,-130.5229354264,-7.5E-02) + ); +#472083 = DIRECTION('',(0.,0.,-1.)); +#472084 = DIRECTION('',(-0.894429926168,0.447208125121,0.)); +#472085 = ORIENTED_EDGE('',*,*,#472086,.T.); +#472086 = EDGE_CURVE('',#472078,#472087,#472089,.T.); +#472087 = VERTEX_POINT('',#472088); +#472088 = CARTESIAN_POINT('',(151.735925,-130.653528,-7.5E-02)); +#472089 = LINE('',#472090,#472091); +#472090 = CARTESIAN_POINT('',(151.79291,-130.545296,-7.5E-02)); +#472091 = VECTOR('',#472092,1.); +#472092 = DIRECTION('',(-0.465879522902,-0.884848162195,0.)); +#472093 = ORIENTED_EDGE('',*,*,#472094,.T.); +#472094 = EDGE_CURVE('',#472087,#472095,#472097,.T.); +#472095 = VERTEX_POINT('',#472096); +#472096 = CARTESIAN_POINT('',(151.627613,-130.758649,-7.5E-02)); +#472097 = LINE('',#472098,#472099); +#472098 = CARTESIAN_POINT('',(151.735925,-130.653528,-7.5E-02)); +#472099 = VECTOR('',#472100,1.); +#472100 = DIRECTION('',(-0.717598415891,-0.696457115342,0.)); +#472101 = ORIENTED_EDGE('',*,*,#472102,.T.); +#472102 = EDGE_CURVE('',#472095,#472103,#472105,.T.); +#472103 = VERTEX_POINT('',#472104); +#472104 = CARTESIAN_POINT('',(152.412475,-130.758649,-7.5E-02)); +#472105 = LINE('',#472106,#472107); +#472106 = CARTESIAN_POINT('',(151.627613,-130.758649,-7.5E-02)); +#472107 = VECTOR('',#472108,1.); +#472108 = DIRECTION('',(1.,0.,0.)); +#472109 = ORIENTED_EDGE('',*,*,#472110,.T.); +#472110 = EDGE_CURVE('',#472103,#472111,#472113,.T.); +#472111 = VERTEX_POINT('',#472112); +#472112 = CARTESIAN_POINT('',(152.412475,-130.522935,-7.5E-02)); +#472113 = LINE('',#472114,#472115); +#472114 = CARTESIAN_POINT('',(152.412475,-130.758649,-7.5E-02)); +#472115 = VECTOR('',#472116,1.); +#472116 = DIRECTION('',(0.,1.,0.)); +#472117 = ORIENTED_EDGE('',*,*,#472118,.T.); +#472118 = EDGE_CURVE('',#472111,#472119,#472121,.T.); +#472119 = VERTEX_POINT('',#472120); +#472120 = CARTESIAN_POINT('',(152.512475,-130.522935,-7.5E-02)); +#472121 = CIRCLE('',#472122,5.000000000003E-02); +#472122 = AXIS2_PLACEMENT_3D('',#472123,#472124,#472125); +#472123 = CARTESIAN_POINT('',(152.462475,-130.5229350477,-7.5E-02)); +#472124 = DIRECTION('',(0.,0.,-1.)); +#472125 = DIRECTION('',(-1.,9.54237293626E-07,0.)); +#472126 = ORIENTED_EDGE('',*,*,#472127,.T.); +#472127 = EDGE_CURVE('',#472119,#472128,#472130,.T.); +#472128 = VERTEX_POINT('',#472129); +#472129 = CARTESIAN_POINT('',(152.512475,-131.094363,-7.5E-02)); +#472130 = LINE('',#472131,#472132); +#472131 = CARTESIAN_POINT('',(152.512475,-130.522935,-7.5E-02)); +#472132 = VECTOR('',#472133,1.); +#472133 = DIRECTION('',(0.,-1.,0.)); +#472134 = ORIENTED_EDGE('',*,*,#472135,.T.); +#472135 = EDGE_CURVE('',#472128,#472136,#472138,.T.); +#472136 = VERTEX_POINT('',#472137); +#472137 = CARTESIAN_POINT('',(152.412475,-131.094363,-7.5E-02)); +#472138 = CIRCLE('',#472139,5.000000000002E-02); +#472139 = AXIS2_PLACEMENT_3D('',#472140,#472141,#472142); +#472140 = CARTESIAN_POINT('',(152.462475,-131.0943629522,-7.5E-02)); +#472141 = DIRECTION('',(-0.,0.,-1.)); +#472142 = DIRECTION('',(1.,-9.542361567582E-07,-0.)); +#472143 = ORIENTED_EDGE('',*,*,#472144,.T.); +#472144 = EDGE_CURVE('',#472136,#472145,#472147,.T.); +#472145 = VERTEX_POINT('',#472146); +#472146 = CARTESIAN_POINT('',(152.412475,-130.858649,-7.5E-02)); +#472147 = LINE('',#472148,#472149); +#472148 = CARTESIAN_POINT('',(152.412475,-131.094363,-7.5E-02)); +#472149 = VECTOR('',#472150,1.); +#472150 = DIRECTION('',(0.,1.,0.)); +#472151 = ORIENTED_EDGE('',*,*,#472152,.T.); +#472152 = EDGE_CURVE('',#472145,#472153,#472155,.T.); +#472153 = VERTEX_POINT('',#472154); +#472154 = CARTESIAN_POINT('',(151.462475,-130.858649,-7.5E-02)); +#472155 = LINE('',#472156,#472157); +#472156 = CARTESIAN_POINT('',(152.412475,-130.858649,-7.5E-02)); +#472157 = VECTOR('',#472158,1.); +#472158 = DIRECTION('',(-1.,0.,0.)); +#472159 = ORIENTED_EDGE('',*,*,#472160,.T.); +#472160 = EDGE_CURVE('',#472153,#472161,#472163,.T.); +#472161 = VERTEX_POINT('',#472162); +#472162 = CARTESIAN_POINT('',(151.43474,-130.767046,-7.5E-02)); +#472163 = CIRCLE('',#472164,5.000048412538E-02); +#472164 = AXIS2_PLACEMENT_3D('',#472165,#472166,#472167); +#472165 = CARTESIAN_POINT('',(151.46247588082,-130.8086485158,-7.5E-02) + ); +#472166 = DIRECTION('',(0.,0.,-1.)); +#472167 = DIRECTION('',(-1.761628932987E-05,-0.999999999845,-0.)); +#472168 = ORIENTED_EDGE('',*,*,#472169,.T.); +#472169 = EDGE_CURVE('',#472161,#472170,#472172,.T.); +#472170 = VERTEX_POINT('',#472171); +#472171 = CARTESIAN_POINT('',(151.573481,-130.674552,-7.5E-02)); +#472172 = LINE('',#472173,#472174); +#472173 = CARTESIAN_POINT('',(151.43474,-130.767046,-7.5E-02)); +#472174 = VECTOR('',#472175,1.); +#472175 = DIRECTION('',(0.832050294338,0.554700196225,0.)); +#472176 = ORIENTED_EDGE('',*,*,#472177,.T.); +#472177 = EDGE_CURVE('',#472170,#472178,#472180,.T.); +#472178 = VERTEX_POINT('',#472179); +#472179 = CARTESIAN_POINT('',(151.659476,-130.588556,-7.5E-02)); +#472180 = LINE('',#472181,#472182); +#472181 = CARTESIAN_POINT('',(151.573481,-130.674552,-7.5E-02)); +#472182 = VECTOR('',#472183,1.); +#472183 = DIRECTION('',(0.707102669874,0.707110892476,0.)); +#472184 = ORIENTED_EDGE('',*,*,#472185,.T.); +#472185 = EDGE_CURVE('',#472178,#472076,#472186,.T.); +#472186 = LINE('',#472187,#472188); +#472187 = CARTESIAN_POINT('',(151.659476,-130.588556,-7.5E-02)); +#472188 = VECTOR('',#472189,1.); +#472189 = DIRECTION('',(0.447217661942,0.894425157767,0.)); +#472190 = PLANE('',#472191); +#472191 = AXIS2_PLACEMENT_3D('',#472192,#472193,#472194); +#472192 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472193 = DIRECTION('',(-0.,-0.,-1.)); +#472194 = DIRECTION('',(-1.,0.,0.)); +#472195 = SHELL_BASED_SURFACE_MODEL('',(#472196)); +#472196 = OPEN_SHELL('',(#472197)); +#472197 = ADVANCED_FACE('',(#472198),#472234,.T.); +#472198 = FACE_BOUND('',#472199,.T.); +#472199 = EDGE_LOOP('',(#472200,#472211,#472219,#472228)); +#472200 = ORIENTED_EDGE('',*,*,#472201,.T.); +#472201 = EDGE_CURVE('',#472202,#472204,#472206,.T.); +#472202 = VERTEX_POINT('',#472203); +#472203 = CARTESIAN_POINT('',(146.935,-130.8875,-7.5E-02)); +#472204 = VERTEX_POINT('',#472205); +#472205 = CARTESIAN_POINT('',(146.935,-130.7675,-7.5E-02)); +#472206 = CIRCLE('',#472207,6.000000000041E-02); +#472207 = AXIS2_PLACEMENT_3D('',#472208,#472209,#472210); +#472208 = CARTESIAN_POINT('',(146.93499977441,-130.8275,-7.5E-02)); +#472209 = DIRECTION('',(0.,0.,-1.)); +#472210 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#472211 = ORIENTED_EDGE('',*,*,#472212,.T.); +#472212 = EDGE_CURVE('',#472204,#472213,#472215,.T.); +#472213 = VERTEX_POINT('',#472214); +#472214 = CARTESIAN_POINT('',(147.265,-130.7675,-7.5E-02)); +#472215 = LINE('',#472216,#472217); +#472216 = CARTESIAN_POINT('',(146.935,-130.7675,-7.5E-02)); +#472217 = VECTOR('',#472218,1.); +#472218 = DIRECTION('',(1.,0.,0.)); +#472219 = ORIENTED_EDGE('',*,*,#472220,.T.); +#472220 = EDGE_CURVE('',#472213,#472221,#472223,.T.); +#472221 = VERTEX_POINT('',#472222); +#472222 = CARTESIAN_POINT('',(147.265,-130.8875,-7.5E-02)); +#472223 = CIRCLE('',#472224,6.000000000042E-02); +#472224 = AXIS2_PLACEMENT_3D('',#472225,#472226,#472227); +#472225 = CARTESIAN_POINT('',(147.26500022558,-130.8275,-7.5E-02)); +#472226 = DIRECTION('',(0.,0.,-1.)); +#472227 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#472228 = ORIENTED_EDGE('',*,*,#472229,.T.); +#472229 = EDGE_CURVE('',#472221,#472202,#472230,.T.); +#472230 = LINE('',#472231,#472232); +#472231 = CARTESIAN_POINT('',(147.265,-130.8875,-7.5E-02)); +#472232 = VECTOR('',#472233,1.); +#472233 = DIRECTION('',(-1.,0.,0.)); +#472234 = PLANE('',#472235); +#472235 = AXIS2_PLACEMENT_3D('',#472236,#472237,#472238); +#472236 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472237 = DIRECTION('',(-0.,-0.,-1.)); +#472238 = DIRECTION('',(-1.,0.,0.)); +#472239 = SHELL_BASED_SURFACE_MODEL('',(#472240)); +#472240 = OPEN_SHELL('',(#472241)); +#472241 = ADVANCED_FACE('',(#472242,#472382),#472465,.T.); +#472242 = FACE_BOUND('',#472243,.T.); +#472243 = EDGE_LOOP('',(#472244,#472254,#472262,#472270,#472278,#472286, + #472294,#472302,#472310,#472318,#472327,#472335,#472344,#472352, + #472360,#472368,#472376)); +#472244 = ORIENTED_EDGE('',*,*,#472245,.T.); +#472245 = EDGE_CURVE('',#472246,#472248,#472250,.T.); +#472246 = VERTEX_POINT('',#472247); +#472247 = CARTESIAN_POINT('',(153.478629,-130.287735,-7.5E-02)); +#472248 = VERTEX_POINT('',#472249); +#472249 = CARTESIAN_POINT('',(153.584955,-130.237079,-7.5E-02)); +#472250 = LINE('',#472251,#472252); +#472251 = CARTESIAN_POINT('',(153.478629,-130.287735,-7.5E-02)); +#472252 = VECTOR('',#472253,1.); +#472253 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#472254 = ORIENTED_EDGE('',*,*,#472255,.T.); +#472255 = EDGE_CURVE('',#472248,#472256,#472258,.T.); +#472256 = VERTEX_POINT('',#472257); +#472257 = CARTESIAN_POINT('',(153.884398,-130.235325,-7.5E-02)); +#472258 = LINE('',#472259,#472260); +#472259 = CARTESIAN_POINT('',(153.584955,-130.237079,-7.5E-02)); +#472260 = VECTOR('',#472261,1.); +#472261 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#472262 = ORIENTED_EDGE('',*,*,#472263,.T.); +#472263 = EDGE_CURVE('',#472256,#472264,#472266,.T.); +#472264 = VERTEX_POINT('',#472265); +#472265 = CARTESIAN_POINT('',(153.904303,-130.240116,-7.5E-02)); +#472266 = LINE('',#472267,#472268); +#472267 = CARTESIAN_POINT('',(153.884398,-130.235325,-7.5E-02)); +#472268 = VECTOR('',#472269,1.); +#472269 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#472270 = ORIENTED_EDGE('',*,*,#472271,.T.); +#472271 = EDGE_CURVE('',#472264,#472272,#472274,.T.); +#472272 = VERTEX_POINT('',#472273); +#472273 = CARTESIAN_POINT('',(154.012535,-130.2971,-7.5E-02)); +#472274 = LINE('',#472275,#472276); +#472275 = CARTESIAN_POINT('',(153.904303,-130.240116,-7.5E-02)); +#472276 = VECTOR('',#472277,1.); +#472277 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#472278 = ORIENTED_EDGE('',*,*,#472279,.T.); +#472279 = EDGE_CURVE('',#472272,#472280,#472282,.T.); +#472280 = VERTEX_POINT('',#472281); +#472281 = CARTESIAN_POINT('',(154.069521,-130.357714,-7.5E-02)); +#472282 = LINE('',#472283,#472284); +#472283 = CARTESIAN_POINT('',(154.012535,-130.2971,-7.5E-02)); +#472284 = VECTOR('',#472285,1.); +#472285 = DIRECTION('',(0.684966417831,-0.72857464027,0.)); +#472286 = ORIENTED_EDGE('',*,*,#472287,.T.); +#472287 = EDGE_CURVE('',#472280,#472288,#472290,.T.); +#472288 = VERTEX_POINT('',#472289); +#472289 = CARTESIAN_POINT('',(154.120176,-130.46404,-7.5E-02)); +#472290 = LINE('',#472291,#472292); +#472291 = CARTESIAN_POINT('',(154.069521,-130.357714,-7.5E-02)); +#472292 = VECTOR('',#472293,1.); +#472293 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#472294 = ORIENTED_EDGE('',*,*,#472295,.T.); +#472295 = EDGE_CURVE('',#472288,#472296,#472298,.T.); +#472296 = VERTEX_POINT('',#472297); +#472297 = CARTESIAN_POINT('',(154.120176,-130.677061,-7.5E-02)); +#472298 = LINE('',#472299,#472300); +#472299 = CARTESIAN_POINT('',(154.120176,-130.46404,-7.5E-02)); +#472300 = VECTOR('',#472301,1.); +#472301 = DIRECTION('',(0.,-1.,0.)); +#472302 = ORIENTED_EDGE('',*,*,#472303,.T.); +#472303 = EDGE_CURVE('',#472296,#472304,#472306,.T.); +#472304 = VERTEX_POINT('',#472305); +#472305 = CARTESIAN_POINT('',(154.099716,-130.722996,-7.5E-02)); +#472306 = LINE('',#472307,#472308); +#472307 = CARTESIAN_POINT('',(154.120176,-130.677061,-7.5E-02)); +#472308 = VECTOR('',#472309,1.); +#472309 = DIRECTION('',(-0.406876386711,-0.91348322696,0.)); +#472310 = ORIENTED_EDGE('',*,*,#472311,.T.); +#472311 = EDGE_CURVE('',#472304,#472312,#472314,.T.); +#472312 = VERTEX_POINT('',#472313); +#472313 = CARTESIAN_POINT('',(154.118613,-130.741893,-7.5E-02)); +#472314 = LINE('',#472315,#472316); +#472315 = CARTESIAN_POINT('',(154.099716,-130.722996,-7.5E-02)); +#472316 = VECTOR('',#472317,1.); +#472317 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#472318 = ORIENTED_EDGE('',*,*,#472319,.T.); +#472319 = EDGE_CURVE('',#472312,#472320,#472322,.T.); +#472320 = VERTEX_POINT('',#472321); +#472321 = CARTESIAN_POINT('',(154.072419,-130.811027,-7.5E-02)); +#472322 = CIRCLE('',#472323,5.000000000001E-02); +#472323 = AXIS2_PLACEMENT_3D('',#472324,#472325,#472326); +#472324 = CARTESIAN_POINT('',(154.07241895228,-130.761027,-7.5E-02)); +#472325 = DIRECTION('',(0.,0.,-1.)); +#472326 = DIRECTION('',(0.923880954236,0.38268,0.)); +#472327 = ORIENTED_EDGE('',*,*,#472328,.T.); +#472328 = EDGE_CURVE('',#472320,#472329,#472331,.T.); +#472329 = VERTEX_POINT('',#472330); +#472330 = CARTESIAN_POINT('',(153.072419,-130.811027,-7.5E-02)); +#472331 = LINE('',#472332,#472333); +#472332 = CARTESIAN_POINT('',(154.072419,-130.811027,-7.5E-02)); +#472333 = VECTOR('',#472334,1.); +#472334 = DIRECTION('',(-1.,0.,0.)); +#472335 = ORIENTED_EDGE('',*,*,#472336,.T.); +#472336 = EDGE_CURVE('',#472329,#472337,#472339,.T.); +#472337 = VERTEX_POINT('',#472338); +#472338 = CARTESIAN_POINT('',(153.072419,-130.711027,-7.5E-02)); +#472339 = CIRCLE('',#472340,5.000000000003E-02); +#472340 = AXIS2_PLACEMENT_3D('',#472341,#472342,#472343); +#472341 = CARTESIAN_POINT('',(153.07241904771,-130.761027,-7.5E-02)); +#472342 = DIRECTION('',(0.,0.,-1.)); +#472343 = DIRECTION('',(-9.54237293626E-07,-1.,-0.)); +#472344 = ORIENTED_EDGE('',*,*,#472345,.T.); +#472345 = EDGE_CURVE('',#472337,#472346,#472348,.T.); +#472346 = VERTEX_POINT('',#472347); +#472347 = CARTESIAN_POINT('',(153.372469,-130.711027,-7.5E-02)); +#472348 = LINE('',#472349,#472350); +#472349 = CARTESIAN_POINT('',(153.072419,-130.711027,-7.5E-02)); +#472350 = VECTOR('',#472351,1.); +#472351 = DIRECTION('',(1.,0.,0.)); +#472352 = ORIENTED_EDGE('',*,*,#472353,.T.); +#472353 = EDGE_CURVE('',#472346,#472354,#472356,.T.); +#472354 = VERTEX_POINT('',#472355); +#472355 = CARTESIAN_POINT('',(153.35624,-130.668245,-7.5E-02)); +#472356 = LINE('',#472357,#472358); +#472357 = CARTESIAN_POINT('',(153.372469,-130.711027,-7.5E-02)); +#472358 = VECTOR('',#472359,1.); +#472359 = DIRECTION('',(-0.354679928026,0.93498777995,0.)); +#472360 = ORIENTED_EDGE('',*,*,#472361,.T.); +#472361 = EDGE_CURVE('',#472354,#472362,#472364,.T.); +#472362 = VERTEX_POINT('',#472363); +#472363 = CARTESIAN_POINT('',(153.357994,-130.46404,-7.5E-02)); +#472364 = LINE('',#472365,#472366); +#472365 = CARTESIAN_POINT('',(153.35624,-130.668245,-7.5E-02)); +#472366 = VECTOR('',#472367,1.); +#472367 = DIRECTION('',(8.589090866125E-03,0.999963113079,0.)); +#472368 = ORIENTED_EDGE('',*,*,#472369,.T.); +#472369 = EDGE_CURVE('',#472362,#472370,#472372,.T.); +#472370 = VERTEX_POINT('',#472371); +#472371 = CARTESIAN_POINT('',(153.418016,-130.34472,-7.5E-02)); +#472372 = LINE('',#472373,#472374); +#472373 = CARTESIAN_POINT('',(153.357994,-130.46404,-7.5E-02)); +#472374 = VECTOR('',#472375,1.); +#472375 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#472376 = ORIENTED_EDGE('',*,*,#472377,.T.); +#472377 = EDGE_CURVE('',#472370,#472246,#472378,.T.); +#472378 = LINE('',#472379,#472380); +#472379 = CARTESIAN_POINT('',(153.418016,-130.34472,-7.5E-02)); +#472380 = VECTOR('',#472381,1.); +#472381 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#472382 = FACE_BOUND('',#472383,.T.); +#472383 = EDGE_LOOP('',(#472384,#472395,#472403,#472411,#472419,#472427, + #472435,#472443,#472451,#472459)); +#472384 = ORIENTED_EDGE('',*,*,#472385,.T.); +#472385 = EDGE_CURVE('',#472386,#472388,#472390,.T.); +#472386 = VERTEX_POINT('',#472387); +#472387 = CARTESIAN_POINT('',(153.947561,-130.373548,-7.5E-02)); +#472388 = VERTEX_POINT('',#472389); +#472389 = CARTESIAN_POINT('',(153.530608,-130.373548,-7.5E-02)); +#472390 = CIRCLE('',#472391,0.382072162856); +#472391 = AXIS2_PLACEMENT_3D('',#472392,#472393,#472394); +#472392 = CARTESIAN_POINT('',(153.7390845,-130.6937302708,-7.5E-02)); +#472393 = DIRECTION('',(0.,0.,1.)); +#472394 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#472395 = ORIENTED_EDGE('',*,*,#472396,.T.); +#472396 = EDGE_CURVE('',#472388,#472397,#472399,.T.); +#472397 = VERTEX_POINT('',#472398); +#472398 = CARTESIAN_POINT('',(153.494463,-130.409692,-7.5E-02)); +#472399 = LINE('',#472400,#472401); +#472400 = CARTESIAN_POINT('',(153.530608,-130.373548,-7.5E-02)); +#472401 = VECTOR('',#472402,1.); +#472402 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#472403 = ORIENTED_EDGE('',*,*,#472404,.T.); +#472404 = EDGE_CURVE('',#472397,#472405,#472407,.T.); +#472405 = VERTEX_POINT('',#472406); +#472406 = CARTESIAN_POINT('',(153.455752,-130.487116,-7.5E-02)); +#472407 = LINE('',#472408,#472409); +#472408 = CARTESIAN_POINT('',(153.494463,-130.409692,-7.5E-02)); +#472409 = VECTOR('',#472410,1.); +#472410 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#472411 = ORIENTED_EDGE('',*,*,#472412,.T.); +#472412 = EDGE_CURVE('',#472405,#472413,#472415,.T.); +#472413 = VERTEX_POINT('',#472414); +#472414 = CARTESIAN_POINT('',(153.455752,-130.653986,-7.5E-02)); +#472415 = LINE('',#472416,#472417); +#472416 = CARTESIAN_POINT('',(153.455752,-130.487116,-7.5E-02)); +#472417 = VECTOR('',#472418,1.); +#472418 = DIRECTION('',(0.,-1.,0.)); +#472419 = ORIENTED_EDGE('',*,*,#472420,.T.); +#472420 = EDGE_CURVE('',#472413,#472421,#472423,.T.); +#472421 = VERTEX_POINT('',#472422); +#472422 = CARTESIAN_POINT('',(153.484272,-130.711027,-7.5E-02)); +#472423 = LINE('',#472424,#472425); +#472424 = CARTESIAN_POINT('',(153.455752,-130.653986,-7.5E-02)); +#472425 = VECTOR('',#472426,1.); +#472426 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#472427 = ORIENTED_EDGE('',*,*,#472428,.T.); +#472428 = EDGE_CURVE('',#472421,#472429,#472431,.T.); +#472429 = VERTEX_POINT('',#472430); +#472430 = CARTESIAN_POINT('',(153.993898,-130.711027,-7.5E-02)); +#472431 = LINE('',#472432,#472433); +#472432 = CARTESIAN_POINT('',(153.484272,-130.711027,-7.5E-02)); +#472433 = VECTOR('',#472434,1.); +#472434 = DIRECTION('',(1.,0.,0.)); +#472435 = ORIENTED_EDGE('',*,*,#472436,.T.); +#472436 = EDGE_CURVE('',#472429,#472437,#472439,.T.); +#472437 = VERTEX_POINT('',#472438); +#472438 = CARTESIAN_POINT('',(154.022419,-130.653985,-7.5E-02)); +#472439 = LINE('',#472440,#472441); +#472440 = CARTESIAN_POINT('',(153.993898,-130.711027,-7.5E-02)); +#472441 = VECTOR('',#472442,1.); +#472442 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#472443 = ORIENTED_EDGE('',*,*,#472444,.T.); +#472444 = EDGE_CURVE('',#472437,#472445,#472447,.T.); +#472445 = VERTEX_POINT('',#472446); +#472446 = CARTESIAN_POINT('',(154.022419,-130.487116,-7.5E-02)); +#472447 = LINE('',#472448,#472449); +#472448 = CARTESIAN_POINT('',(154.022419,-130.653985,-7.5E-02)); +#472449 = VECTOR('',#472450,1.); +#472450 = DIRECTION('',(0.,1.,0.)); +#472451 = ORIENTED_EDGE('',*,*,#472452,.T.); +#472452 = EDGE_CURVE('',#472445,#472453,#472455,.T.); +#472453 = VERTEX_POINT('',#472454); +#472454 = CARTESIAN_POINT('',(153.983708,-130.409694,-7.5E-02)); +#472455 = LINE('',#472456,#472457); +#472456 = CARTESIAN_POINT('',(154.022419,-130.487116,-7.5E-02)); +#472457 = VECTOR('',#472458,1.); +#472458 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#472459 = ORIENTED_EDGE('',*,*,#472460,.T.); +#472460 = EDGE_CURVE('',#472453,#472386,#472461,.T.); +#472461 = LINE('',#472462,#472463); +#472462 = CARTESIAN_POINT('',(153.983708,-130.409694,-7.5E-02)); +#472463 = VECTOR('',#472464,1.); +#472464 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#472465 = PLANE('',#472466); +#472466 = AXIS2_PLACEMENT_3D('',#472467,#472468,#472469); +#472467 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472468 = DIRECTION('',(-0.,-0.,-1.)); +#472469 = DIRECTION('',(-1.,0.,0.)); +#472470 = SHELL_BASED_SURFACE_MODEL('',(#472471)); +#472471 = OPEN_SHELL('',(#472472)); +#472472 = ADVANCED_FACE('',(#472473),#472533,.T.); +#472473 = FACE_BOUND('',#472474,.T.); +#472474 = EDGE_LOOP('',(#472475,#472485,#472494,#472502,#472511,#472519, + #472527)); +#472475 = ORIENTED_EDGE('',*,*,#472476,.T.); +#472476 = EDGE_CURVE('',#472477,#472479,#472481,.T.); +#472477 = VERTEX_POINT('',#472478); +#472478 = CARTESIAN_POINT('',(146.891697,-130.346908,-7.5E-02)); +#472479 = VERTEX_POINT('',#472480); +#472480 = CARTESIAN_POINT('',(147.094408,-130.194197,-7.5E-02)); +#472481 = LINE('',#472482,#472483); +#472482 = CARTESIAN_POINT('',(146.891697,-130.346908,-7.5E-02)); +#472483 = VECTOR('',#472484,1.); +#472484 = DIRECTION('',(0.798716357384,0.601707720116,0.)); +#472485 = ORIENTED_EDGE('',*,*,#472486,.T.); +#472486 = EDGE_CURVE('',#472479,#472487,#472489,.T.); +#472487 = VERTEX_POINT('',#472488); +#472488 = CARTESIAN_POINT('',(147.19,-130.2425,-7.5E-02)); +#472489 = CIRCLE('',#472490,6.000006658931E-02); +#472490 = AXIS2_PLACEMENT_3D('',#472491,#472492,#472493); +#472491 = CARTESIAN_POINT('',(147.12999993341,-130.2425004394,-7.5E-02) + ); +#472492 = DIRECTION('',(0.,0.,-1.)); +#472493 = DIRECTION('',(-0.593198231861,0.805056431387,0.)); +#472494 = ORIENTED_EDGE('',*,*,#472495,.T.); +#472495 = EDGE_CURVE('',#472487,#472496,#472498,.T.); +#472496 = VERTEX_POINT('',#472497); +#472497 = CARTESIAN_POINT('',(147.19,-130.5225,-7.5E-02)); +#472498 = LINE('',#472499,#472500); +#472499 = CARTESIAN_POINT('',(147.19,-130.2425,-7.5E-02)); +#472500 = VECTOR('',#472501,1.); +#472501 = DIRECTION('',(0.,-1.,0.)); +#472502 = ORIENTED_EDGE('',*,*,#472503,.T.); +#472503 = EDGE_CURVE('',#472496,#472504,#472506,.T.); +#472504 = VERTEX_POINT('',#472505); +#472505 = CARTESIAN_POINT('',(147.094408,-130.570803,-7.5E-02)); +#472506 = CIRCLE('',#472507,6.000032339629E-02); +#472507 = AXIS2_PLACEMENT_3D('',#472508,#472509,#472510); +#472508 = CARTESIAN_POINT('',(147.12999967661,-130.5224990522,-7.5E-02) + ); +#472509 = DIRECTION('',(0.,0.,-1.)); +#472510 = DIRECTION('',(0.999999999875,-1.579495966416E-05,0.)); +#472511 = ORIENTED_EDGE('',*,*,#472512,.T.); +#472512 = EDGE_CURVE('',#472504,#472513,#472515,.T.); +#472513 = VERTEX_POINT('',#472514); +#472514 = CARTESIAN_POINT('',(146.904408,-130.430803,-7.5E-02)); +#472515 = LINE('',#472516,#472517); +#472516 = CARTESIAN_POINT('',(147.094408,-130.570803,-7.5E-02)); +#472517 = VECTOR('',#472518,1.); +#472518 = DIRECTION('',(-0.805055837353,0.59319903805,0.)); +#472519 = ORIENTED_EDGE('',*,*,#472520,.T.); +#472520 = EDGE_CURVE('',#472513,#472521,#472523,.T.); +#472521 = VERTEX_POINT('',#472522); +#472522 = CARTESIAN_POINT('',(146.880677,-130.391488,-7.5E-02)); +#472523 = LINE('',#472524,#472525); +#472524 = CARTESIAN_POINT('',(146.904408,-130.430803,-7.5E-02)); +#472525 = VECTOR('',#472526,1.); +#472526 = DIRECTION('',(-0.516767623406,0.856125705372,0.)); +#472527 = ORIENTED_EDGE('',*,*,#472528,.T.); +#472528 = EDGE_CURVE('',#472521,#472477,#472529,.T.); +#472529 = LINE('',#472530,#472531); +#472530 = CARTESIAN_POINT('',(146.880677,-130.391488,-7.5E-02)); +#472531 = VECTOR('',#472532,1.); +#472532 = DIRECTION('',(0.239972882473,0.970779591709,0.)); +#472533 = PLANE('',#472534); +#472534 = AXIS2_PLACEMENT_3D('',#472535,#472536,#472537); +#472535 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472536 = DIRECTION('',(-0.,-0.,-1.)); +#472537 = DIRECTION('',(-1.,0.,0.)); +#472538 = SHELL_BASED_SURFACE_MODEL('',(#472539)); +#472539 = OPEN_SHELL('',(#472540)); +#472540 = ADVANCED_FACE('',(#472541),#472618,.T.); +#472541 = FACE_BOUND('',#472542,.T.); +#472542 = EDGE_LOOP('',(#472543,#472554,#472562,#472571,#472579,#472588, + #472596,#472604,#472612)); +#472543 = ORIENTED_EDGE('',*,*,#472544,.T.); +#472544 = EDGE_CURVE('',#472545,#472547,#472549,.T.); +#472545 = VERTEX_POINT('',#472546); +#472546 = CARTESIAN_POINT('',(151.412601,-129.574098,-7.5E-02)); +#472547 = VERTEX_POINT('',#472548); +#472548 = CARTESIAN_POINT('',(151.478286,-129.52312,-7.5E-02)); +#472549 = CIRCLE('',#472550,4.999967670835E-02); +#472550 = AXIS2_PLACEMENT_3D('',#472551,#472552,#472553); +#472551 = CARTESIAN_POINT('',(151.46247491302,-129.5705539245,-7.5E-02) + ); +#472552 = DIRECTION('',(0.,0.,-1.)); +#472553 = DIRECTION('',(-0.997484710033,-7.088196702918E-02,-0.)); +#472554 = ORIENTED_EDGE('',*,*,#472555,.T.); +#472555 = EDGE_CURVE('',#472547,#472556,#472558,.T.); +#472556 = VERTEX_POINT('',#472557); +#472557 = CARTESIAN_POINT('',(152.478286,-129.856453,-7.5E-02)); +#472558 = LINE('',#472559,#472560); +#472559 = CARTESIAN_POINT('',(151.478286,-129.52312,-7.5E-02)); +#472560 = VECTOR('',#472561,1.); +#472561 = DIRECTION('',(0.948683392919,-0.316227481412,0.)); +#472562 = ORIENTED_EDGE('',*,*,#472563,.T.); +#472563 = EDGE_CURVE('',#472556,#472564,#472566,.T.); +#472564 = VERTEX_POINT('',#472565); +#472565 = CARTESIAN_POINT('',(152.478286,-129.951321,-7.5E-02)); +#472566 = CIRCLE('',#472567,4.999970343244E-02); +#472567 = AXIS2_PLACEMENT_3D('',#472568,#472569,#472570); +#472568 = CARTESIAN_POINT('',(152.46247505482,-129.903887,-7.5E-02)); +#472569 = DIRECTION('',(0.,0.,-1.)); +#472570 = DIRECTION('',(0.316220779119,0.948685626988,0.)); +#472571 = ORIENTED_EDGE('',*,*,#472572,.T.); +#472572 = EDGE_CURVE('',#472564,#472573,#472575,.T.); +#472573 = VERTEX_POINT('',#472574); +#472574 = CARTESIAN_POINT('',(151.478286,-130.284654,-7.5E-02)); +#472575 = LINE('',#472576,#472577); +#472576 = CARTESIAN_POINT('',(152.478286,-129.951321,-7.5E-02)); +#472577 = VECTOR('',#472578,1.); +#472578 = DIRECTION('',(-0.948683392919,-0.316227481412,0.)); +#472579 = ORIENTED_EDGE('',*,*,#472580,.T.); +#472580 = EDGE_CURVE('',#472573,#472581,#472583,.T.); +#472581 = VERTEX_POINT('',#472582); +#472582 = CARTESIAN_POINT('',(151.446664,-130.189786,-7.5E-02)); +#472583 = CIRCLE('',#472584,4.999972077159E-02); +#472584 = AXIS2_PLACEMENT_3D('',#472585,#472586,#472587); +#472585 = CARTESIAN_POINT('',(151.46247453738,-130.2372201542,-7.5E-02) + ); +#472586 = DIRECTION('',(0.,0.,-1.)); +#472587 = DIRECTION('',(0.316231018312,-0.948682213946,0.)); +#472588 = ORIENTED_EDGE('',*,*,#472589,.T.); +#472589 = EDGE_CURVE('',#472581,#472590,#472592,.T.); +#472590 = VERTEX_POINT('',#472591); +#472591 = CARTESIAN_POINT('',(152.304361,-129.903887,-7.5E-02)); +#472592 = LINE('',#472593,#472594); +#472593 = CARTESIAN_POINT('',(151.446664,-130.189786,-7.5E-02)); +#472594 = VECTOR('',#472595,1.); +#472595 = DIRECTION('',(0.948683298051,0.316227766017,0.)); +#472596 = ORIENTED_EDGE('',*,*,#472597,.T.); +#472597 = EDGE_CURVE('',#472590,#472598,#472600,.T.); +#472598 = VERTEX_POINT('',#472599); +#472599 = CARTESIAN_POINT('',(151.446664,-129.617988,-7.5E-02)); +#472600 = LINE('',#472601,#472602); +#472601 = CARTESIAN_POINT('',(152.304361,-129.903887,-7.5E-02)); +#472602 = VECTOR('',#472603,1.); +#472603 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#472604 = ORIENTED_EDGE('',*,*,#472605,.T.); +#472605 = EDGE_CURVE('',#472598,#472606,#472608,.T.); +#472606 = VERTEX_POINT('',#472607); +#472607 = CARTESIAN_POINT('',(151.429715,-129.608327,-7.5E-02)); +#472608 = LINE('',#472609,#472610); +#472609 = CARTESIAN_POINT('',(151.446664,-129.617988,-7.5E-02)); +#472610 = VECTOR('',#472611,1.); +#472611 = DIRECTION('',(-0.868775726523,0.495205752193,0.)); +#472612 = ORIENTED_EDGE('',*,*,#472613,.T.); +#472613 = EDGE_CURVE('',#472606,#472545,#472614,.T.); +#472614 = LINE('',#472615,#472616); +#472615 = CARTESIAN_POINT('',(151.429715,-129.608327,-7.5E-02)); +#472616 = VECTOR('',#472617,1.); +#472617 = DIRECTION('',(-0.447203143134,0.894432417106,0.)); +#472618 = PLANE('',#472619); +#472619 = AXIS2_PLACEMENT_3D('',#472620,#472621,#472622); +#472620 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472621 = DIRECTION('',(-0.,-0.,-1.)); +#472622 = DIRECTION('',(-1.,0.,0.)); +#472623 = SHELL_BASED_SURFACE_MODEL('',(#472624)); +#472624 = OPEN_SHELL('',(#472625)); +#472625 = ADVANCED_FACE('',(#472626),#472775,.T.); +#472626 = FACE_BOUND('',#472627,.T.); +#472627 = EDGE_LOOP('',(#472628,#472639,#472647,#472656,#472664,#472672, + #472680,#472688,#472696,#472704,#472712,#472721,#472729,#472737, + #472745,#472753,#472761,#472769)); +#472628 = ORIENTED_EDGE('',*,*,#472629,.T.); +#472629 = EDGE_CURVE('',#472630,#472632,#472634,.T.); +#472630 = VERTEX_POINT('',#472631); +#472631 = CARTESIAN_POINT('',(153.386618,-129.473888,-7.5E-02)); +#472632 = VERTEX_POINT('',#472633); +#472633 = CARTESIAN_POINT('',(153.405752,-129.377694,-7.5E-02)); +#472634 = CIRCLE('',#472635,4.999998452108E-02); +#472635 = AXIS2_PLACEMENT_3D('',#472636,#472637,#472638); +#472636 = CARTESIAN_POINT('',(153.40575203736,-129.4276939845,-7.5E-02) + ); +#472637 = DIRECTION('',(0.,0.,-1.)); +#472638 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#472639 = ORIENTED_EDGE('',*,*,#472640,.T.); +#472640 = EDGE_CURVE('',#472632,#472641,#472643,.T.); +#472641 = VERTEX_POINT('',#472642); +#472642 = CARTESIAN_POINT('',(154.072419,-129.377694,-7.5E-02)); +#472643 = LINE('',#472644,#472645); +#472644 = CARTESIAN_POINT('',(153.405752,-129.377694,-7.5E-02)); +#472645 = VECTOR('',#472646,1.); +#472646 = DIRECTION('',(1.,0.,0.)); +#472647 = ORIENTED_EDGE('',*,*,#472648,.T.); +#472648 = EDGE_CURVE('',#472641,#472649,#472651,.T.); +#472649 = VERTEX_POINT('',#472650); +#472650 = CARTESIAN_POINT('',(154.072419,-129.477694,-7.5E-02)); +#472651 = CIRCLE('',#472652,5.000000000003E-02); +#472652 = AXIS2_PLACEMENT_3D('',#472653,#472654,#472655); +#472653 = CARTESIAN_POINT('',(154.07241895228,-129.427694,-7.5E-02)); +#472654 = DIRECTION('',(0.,0.,-1.)); +#472655 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#472656 = ORIENTED_EDGE('',*,*,#472657,.T.); +#472657 = EDGE_CURVE('',#472649,#472658,#472660,.T.); +#472658 = VERTEX_POINT('',#472659); +#472659 = CARTESIAN_POINT('',(153.521701,-129.477694,-7.5E-02)); +#472660 = LINE('',#472661,#472662); +#472661 = CARTESIAN_POINT('',(154.072419,-129.477694,-7.5E-02)); +#472662 = VECTOR('',#472663,1.); +#472663 = DIRECTION('',(-1.,0.,0.)); +#472664 = ORIENTED_EDGE('',*,*,#472665,.T.); +#472665 = EDGE_CURVE('',#472658,#472666,#472668,.T.); +#472666 = VERTEX_POINT('',#472667); +#472667 = CARTESIAN_POINT('',(153.494463,-129.50493,-7.5E-02)); +#472668 = LINE('',#472669,#472670); +#472669 = CARTESIAN_POINT('',(153.521701,-129.477694,-7.5E-02)); +#472670 = VECTOR('',#472671,1.); +#472671 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#472672 = ORIENTED_EDGE('',*,*,#472673,.T.); +#472673 = EDGE_CURVE('',#472666,#472674,#472676,.T.); +#472674 = VERTEX_POINT('',#472675); +#472675 = CARTESIAN_POINT('',(153.455752,-129.582354,-7.5E-02)); +#472676 = LINE('',#472677,#472678); +#472677 = CARTESIAN_POINT('',(153.494463,-129.50493,-7.5E-02)); +#472678 = VECTOR('',#472679,1.); +#472679 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#472680 = ORIENTED_EDGE('',*,*,#472681,.T.); +#472681 = EDGE_CURVE('',#472674,#472682,#472684,.T.); +#472682 = VERTEX_POINT('',#472683); +#472683 = CARTESIAN_POINT('',(153.455752,-129.701605,-7.5E-02)); +#472684 = LINE('',#472685,#472686); +#472685 = CARTESIAN_POINT('',(153.455752,-129.582354,-7.5E-02)); +#472686 = VECTOR('',#472687,1.); +#472687 = DIRECTION('',(0.,-1.,0.)); +#472688 = ORIENTED_EDGE('',*,*,#472689,.T.); +#472689 = EDGE_CURVE('',#472682,#472690,#472692,.T.); +#472690 = VERTEX_POINT('',#472691); +#472691 = CARTESIAN_POINT('',(153.490638,-129.771378,-7.5E-02)); +#472692 = LINE('',#472693,#472694); +#472693 = CARTESIAN_POINT('',(153.455752,-129.701605,-7.5E-02)); +#472694 = VECTOR('',#472695,1.); +#472695 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#472696 = ORIENTED_EDGE('',*,*,#472697,.T.); +#472697 = EDGE_CURVE('',#472690,#472698,#472700,.T.); +#472698 = VERTEX_POINT('',#472699); +#472699 = CARTESIAN_POINT('',(153.560413,-129.806265,-7.5E-02)); +#472700 = LINE('',#472701,#472702); +#472701 = CARTESIAN_POINT('',(153.490638,-129.771378,-7.5E-02)); +#472702 = VECTOR('',#472703,1.); +#472703 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#472704 = ORIENTED_EDGE('',*,*,#472705,.T.); +#472705 = EDGE_CURVE('',#472698,#472706,#472708,.T.); +#472706 = VERTEX_POINT('',#472707); +#472707 = CARTESIAN_POINT('',(154.072419,-129.806265,-7.5E-02)); +#472708 = LINE('',#472709,#472710); +#472709 = CARTESIAN_POINT('',(153.560413,-129.806265,-7.5E-02)); +#472710 = VECTOR('',#472711,1.); +#472711 = DIRECTION('',(1.,0.,0.)); +#472712 = ORIENTED_EDGE('',*,*,#472713,.T.); +#472713 = EDGE_CURVE('',#472706,#472714,#472716,.T.); +#472714 = VERTEX_POINT('',#472715); +#472715 = CARTESIAN_POINT('',(154.072419,-129.906265,-7.5E-02)); +#472716 = CIRCLE('',#472717,5.000000000002E-02); +#472717 = AXIS2_PLACEMENT_3D('',#472718,#472719,#472720); +#472718 = CARTESIAN_POINT('',(154.07241895228,-129.856265,-7.5E-02)); +#472719 = DIRECTION('',(0.,0.,-1.)); +#472720 = DIRECTION('',(9.542361567582E-07,1.,0.)); +#472721 = ORIENTED_EDGE('',*,*,#472722,.T.); +#472722 = EDGE_CURVE('',#472714,#472723,#472725,.T.); +#472723 = VERTEX_POINT('',#472724); +#472724 = CARTESIAN_POINT('',(153.537336,-129.904022,-7.5E-02)); +#472725 = LINE('',#472726,#472727); +#472726 = CARTESIAN_POINT('',(154.072419,-129.906265,-7.5E-02)); +#472727 = VECTOR('',#472728,1.); +#472728 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#472729 = ORIENTED_EDGE('',*,*,#472730,.T.); +#472730 = EDGE_CURVE('',#472723,#472731,#472733,.T.); +#472731 = VERTEX_POINT('',#472732); +#472732 = CARTESIAN_POINT('',(153.420611,-129.846418,-7.5E-02)); +#472733 = LINE('',#472734,#472735); +#472734 = CARTESIAN_POINT('',(153.537336,-129.904022,-7.5E-02)); +#472735 = VECTOR('',#472736,1.); +#472736 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#472737 = ORIENTED_EDGE('',*,*,#472738,.T.); +#472738 = EDGE_CURVE('',#472731,#472739,#472741,.T.); +#472739 = VERTEX_POINT('',#472740); +#472740 = CARTESIAN_POINT('',(153.408649,-129.831006,-7.5E-02)); +#472741 = LINE('',#472742,#472743); +#472742 = CARTESIAN_POINT('',(153.420611,-129.846418,-7.5E-02)); +#472743 = VECTOR('',#472744,1.); +#472744 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#472745 = ORIENTED_EDGE('',*,*,#472746,.T.); +#472746 = EDGE_CURVE('',#472739,#472747,#472749,.T.); +#472747 = VERTEX_POINT('',#472748); +#472748 = CARTESIAN_POINT('',(153.357994,-129.72468,-7.5E-02)); +#472749 = LINE('',#472750,#472751); +#472750 = CARTESIAN_POINT('',(153.408649,-129.831006,-7.5E-02)); +#472751 = VECTOR('',#472752,1.); +#472752 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#472753 = ORIENTED_EDGE('',*,*,#472754,.T.); +#472754 = EDGE_CURVE('',#472747,#472755,#472757,.T.); +#472755 = VERTEX_POINT('',#472756); +#472756 = CARTESIAN_POINT('',(153.357994,-129.559278,-7.5E-02)); +#472757 = LINE('',#472758,#472759); +#472758 = CARTESIAN_POINT('',(153.357994,-129.72468,-7.5E-02)); +#472759 = VECTOR('',#472760,1.); +#472760 = DIRECTION('',(0.,1.,0.)); +#472761 = ORIENTED_EDGE('',*,*,#472762,.T.); +#472762 = EDGE_CURVE('',#472755,#472763,#472765,.T.); +#472763 = VERTEX_POINT('',#472764); +#472764 = CARTESIAN_POINT('',(153.397135,-129.47598,-7.5E-02)); +#472765 = LINE('',#472766,#472767); +#472766 = CARTESIAN_POINT('',(153.357994,-129.559278,-7.5E-02)); +#472767 = VECTOR('',#472768,1.); +#472768 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#472769 = ORIENTED_EDGE('',*,*,#472770,.T.); +#472770 = EDGE_CURVE('',#472763,#472630,#472771,.T.); +#472771 = LINE('',#472772,#472773); +#472772 = CARTESIAN_POINT('',(153.397135,-129.47598,-7.5E-02)); +#472773 = VECTOR('',#472774,1.); +#472774 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#472775 = PLANE('',#472776); +#472776 = AXIS2_PLACEMENT_3D('',#472777,#472778,#472779); +#472777 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472778 = DIRECTION('',(-0.,-0.,-1.)); +#472779 = DIRECTION('',(-1.,0.,0.)); +#472780 = SHELL_BASED_SURFACE_MODEL('',(#472781)); +#472781 = OPEN_SHELL('',(#472782)); +#472782 = ADVANCED_FACE('',(#472783),#472819,.T.); +#472783 = FACE_BOUND('',#472784,.T.); +#472784 = EDGE_LOOP('',(#472785,#472796,#472804,#472813)); +#472785 = ORIENTED_EDGE('',*,*,#472786,.T.); +#472786 = EDGE_CURVE('',#472787,#472789,#472791,.T.); +#472787 = VERTEX_POINT('',#472788); +#472788 = CARTESIAN_POINT('',(147.006359,-129.34,-7.5E-02)); +#472789 = VERTEX_POINT('',#472790); +#472790 = CARTESIAN_POINT('',(147.006359,-129.22,-7.5E-02)); +#472791 = CIRCLE('',#472792,6.000000000042E-02); +#472792 = AXIS2_PLACEMENT_3D('',#472793,#472794,#472795); +#472793 = CARTESIAN_POINT('',(147.00635877441,-129.28,-7.5E-02)); +#472794 = DIRECTION('',(0.,0.,-1.)); +#472795 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#472796 = ORIENTED_EDGE('',*,*,#472797,.T.); +#472797 = EDGE_CURVE('',#472789,#472798,#472800,.T.); +#472798 = VERTEX_POINT('',#472799); +#472799 = CARTESIAN_POINT('',(147.313641,-129.22,-7.5E-02)); +#472800 = LINE('',#472801,#472802); +#472801 = CARTESIAN_POINT('',(147.006359,-129.22,-7.5E-02)); +#472802 = VECTOR('',#472803,1.); +#472803 = DIRECTION('',(1.,0.,0.)); +#472804 = ORIENTED_EDGE('',*,*,#472805,.T.); +#472805 = EDGE_CURVE('',#472798,#472806,#472808,.T.); +#472806 = VERTEX_POINT('',#472807); +#472807 = CARTESIAN_POINT('',(147.313641,-129.34,-7.5E-02)); +#472808 = CIRCLE('',#472809,6.000000000042E-02); +#472809 = AXIS2_PLACEMENT_3D('',#472810,#472811,#472812); +#472810 = CARTESIAN_POINT('',(147.31364122558,-129.28,-7.5E-02)); +#472811 = DIRECTION('',(0.,0.,-1.)); +#472812 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#472813 = ORIENTED_EDGE('',*,*,#472814,.T.); +#472814 = EDGE_CURVE('',#472806,#472787,#472815,.T.); +#472815 = LINE('',#472816,#472817); +#472816 = CARTESIAN_POINT('',(147.313641,-129.34,-7.5E-02)); +#472817 = VECTOR('',#472818,1.); +#472818 = DIRECTION('',(-1.,0.,0.)); +#472819 = PLANE('',#472820); +#472820 = AXIS2_PLACEMENT_3D('',#472821,#472822,#472823); +#472821 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472822 = DIRECTION('',(-0.,-0.,-1.)); +#472823 = DIRECTION('',(-1.,0.,0.)); +#472824 = SHELL_BASED_SURFACE_MODEL('',(#472825)); +#472825 = OPEN_SHELL('',(#472826)); +#472826 = ADVANCED_FACE('',(#472827),#472984,.T.); +#472827 = FACE_BOUND('',#472828,.T.); +#472828 = EDGE_LOOP('',(#472829,#472840,#472848,#472856,#472864,#472872, + #472880,#472888,#472896,#472904,#472913,#472921,#472930,#472938, + #472946,#472954,#472962,#472970,#472978)); +#472829 = ORIENTED_EDGE('',*,*,#472830,.T.); +#472830 = EDGE_CURVE('',#472831,#472833,#472835,.T.); +#472831 = VERTEX_POINT('',#472832); +#472832 = CARTESIAN_POINT('',(153.405752,-128.572932,-7.5E-02)); +#472833 = VERTEX_POINT('',#472834); +#472834 = CARTESIAN_POINT('',(153.405752,-128.472932,-7.5E-02)); +#472835 = CIRCLE('',#472836,5.000000000003E-02); +#472836 = AXIS2_PLACEMENT_3D('',#472837,#472838,#472839); +#472837 = CARTESIAN_POINT('',(153.40575204771,-128.522932,-7.5E-02)); +#472838 = DIRECTION('',(0.,0.,-1.)); +#472839 = DIRECTION('',(-9.542361567576E-07,-1.,-0.)); +#472840 = ORIENTED_EDGE('',*,*,#472841,.T.); +#472841 = EDGE_CURVE('',#472833,#472842,#472844,.T.); +#472842 = VERTEX_POINT('',#472843); +#472843 = CARTESIAN_POINT('',(153.932017,-128.47342,-7.5E-02)); +#472844 = LINE('',#472845,#472846); +#472845 = CARTESIAN_POINT('',(153.405752,-128.472932,-7.5E-02)); +#472846 = VECTOR('',#472847,1.); +#472847 = DIRECTION('',(0.999999570067,-9.272890847983E-04,0.)); +#472848 = ORIENTED_EDGE('',*,*,#472849,.T.); +#472849 = EDGE_CURVE('',#472842,#472850,#472852,.T.); +#472850 = VERTEX_POINT('',#472851); +#472851 = CARTESIAN_POINT('',(153.951921,-128.478211,-7.5E-02)); +#472852 = LINE('',#472853,#472854); +#472853 = CARTESIAN_POINT('',(153.932017,-128.47342,-7.5E-02)); +#472854 = VECTOR('',#472855,1.); +#472855 = DIRECTION('',(0.972231458314,-0.23402134831,0.)); +#472856 = ORIENTED_EDGE('',*,*,#472857,.T.); +#472857 = EDGE_CURVE('',#472850,#472858,#472860,.T.); +#472858 = VERTEX_POINT('',#472859); +#472859 = CARTESIAN_POINT('',(154.059751,-128.535601,-7.5E-02)); +#472860 = LINE('',#472861,#472862); +#472861 = CARTESIAN_POINT('',(153.951921,-128.478211,-7.5E-02)); +#472862 = VECTOR('',#472863,1.); +#472863 = DIRECTION('',(0.882758259515,-0.469827473928,0.)); +#472864 = ORIENTED_EDGE('',*,*,#472865,.T.); +#472865 = EDGE_CURVE('',#472858,#472866,#472868,.T.); +#472866 = VERTEX_POINT('',#472867); +#472867 = CARTESIAN_POINT('',(154.118613,-128.646655,-7.5E-02)); +#472868 = LINE('',#472869,#472870); +#472869 = CARTESIAN_POINT('',(154.059751,-128.535601,-7.5E-02)); +#472870 = VECTOR('',#472871,1.); +#472871 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#472872 = ORIENTED_EDGE('',*,*,#472873,.T.); +#472873 = EDGE_CURVE('',#472866,#472874,#472876,.T.); +#472874 = VERTEX_POINT('',#472875); +#472875 = CARTESIAN_POINT('',(154.122419,-128.665789,-7.5E-02)); +#472876 = LINE('',#472877,#472878); +#472877 = CARTESIAN_POINT('',(154.118613,-128.646655,-7.5E-02)); +#472878 = VECTOR('',#472879,1.); +#472879 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#472880 = ORIENTED_EDGE('',*,*,#472881,.T.); +#472881 = EDGE_CURVE('',#472874,#472882,#472884,.T.); +#472882 = VERTEX_POINT('',#472883); +#472883 = CARTESIAN_POINT('',(154.120176,-128.819918,-7.5E-02)); +#472884 = LINE('',#472885,#472886); +#472885 = CARTESIAN_POINT('',(154.122419,-128.665789,-7.5E-02)); +#472886 = VECTOR('',#472887,1.); +#472887 = DIRECTION('',(-1.455120401612E-02,-0.999894125626,0.)); +#472888 = ORIENTED_EDGE('',*,*,#472889,.T.); +#472889 = EDGE_CURVE('',#472882,#472890,#472892,.T.); +#472890 = VERTEX_POINT('',#472891); +#472891 = CARTESIAN_POINT('',(154.081035,-128.903216,-7.5E-02)); +#472892 = LINE('',#472893,#472894); +#472893 = CARTESIAN_POINT('',(154.120176,-128.819918,-7.5E-02)); +#472894 = VECTOR('',#472895,1.); +#472895 = DIRECTION('',(-0.425280509061,-0.905061593823,0.)); +#472896 = ORIENTED_EDGE('',*,*,#472897,.T.); +#472897 = EDGE_CURVE('',#472890,#472898,#472900,.T.); +#472898 = VERTEX_POINT('',#472899); +#472899 = CARTESIAN_POINT('',(154.091553,-128.905309,-7.5E-02)); +#472900 = LINE('',#472901,#472902); +#472901 = CARTESIAN_POINT('',(154.081035,-128.903216,-7.5E-02)); +#472902 = VECTOR('',#472903,1.); +#472903 = DIRECTION('',(0.980770295219,-0.195165642508,0.)); +#472904 = ORIENTED_EDGE('',*,*,#472905,.T.); +#472905 = EDGE_CURVE('',#472898,#472906,#472908,.T.); +#472906 = VERTEX_POINT('',#472907); +#472907 = CARTESIAN_POINT('',(154.072419,-129.001503,-7.5E-02)); +#472908 = CIRCLE('',#472909,4.999998452111E-02); +#472909 = AXIS2_PLACEMENT_3D('',#472910,#472911,#472912); +#472910 = CARTESIAN_POINT('',(154.07241896263,-128.9515030154,-7.5E-02) + ); +#472911 = DIRECTION('',(0.,0.,-1.)); +#472912 = DIRECTION('',(0.382680865852,0.923880595592,0.)); +#472913 = ORIENTED_EDGE('',*,*,#472914,.T.); +#472914 = EDGE_CURVE('',#472906,#472915,#472917,.T.); +#472915 = VERTEX_POINT('',#472916); +#472916 = CARTESIAN_POINT('',(153.405752,-129.001503,-7.5E-02)); +#472917 = LINE('',#472918,#472919); +#472918 = CARTESIAN_POINT('',(154.072419,-129.001503,-7.5E-02)); +#472919 = VECTOR('',#472920,1.); +#472920 = DIRECTION('',(-1.,0.,0.)); +#472921 = ORIENTED_EDGE('',*,*,#472922,.T.); +#472922 = EDGE_CURVE('',#472915,#472923,#472925,.T.); +#472923 = VERTEX_POINT('',#472924); +#472924 = CARTESIAN_POINT('',(153.405752,-128.901503,-7.5E-02)); +#472925 = CIRCLE('',#472926,5.000000000003E-02); +#472926 = AXIS2_PLACEMENT_3D('',#472927,#472928,#472929); +#472927 = CARTESIAN_POINT('',(153.40575204771,-128.951503,-7.5E-02)); +#472928 = DIRECTION('',(0.,0.,-1.)); +#472929 = DIRECTION('',(-9.542361567576E-07,-1.,-0.)); +#472930 = ORIENTED_EDGE('',*,*,#472931,.T.); +#472931 = EDGE_CURVE('',#472923,#472932,#472934,.T.); +#472932 = VERTEX_POINT('',#472933); +#472933 = CARTESIAN_POINT('',(153.956469,-128.901503,-7.5E-02)); +#472934 = LINE('',#472935,#472936); +#472935 = CARTESIAN_POINT('',(153.405752,-128.901503,-7.5E-02)); +#472936 = VECTOR('',#472937,1.); +#472937 = DIRECTION('',(1.,0.,0.)); +#472938 = ORIENTED_EDGE('',*,*,#472939,.T.); +#472939 = EDGE_CURVE('',#472932,#472940,#472942,.T.); +#472940 = VERTEX_POINT('',#472941); +#472941 = CARTESIAN_POINT('',(153.983708,-128.874264,-7.5E-02)); +#472942 = LINE('',#472943,#472944); +#472943 = CARTESIAN_POINT('',(153.956469,-128.901503,-7.5E-02)); +#472944 = VECTOR('',#472945,1.); +#472945 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#472946 = ORIENTED_EDGE('',*,*,#472947,.T.); +#472947 = EDGE_CURVE('',#472940,#472948,#472950,.T.); +#472948 = VERTEX_POINT('',#472949); +#472949 = CARTESIAN_POINT('',(154.022419,-128.796842,-7.5E-02)); +#472950 = LINE('',#472951,#472952); +#472951 = CARTESIAN_POINT('',(153.983708,-128.874264,-7.5E-02)); +#472952 = VECTOR('',#472953,1.); +#472953 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#472954 = ORIENTED_EDGE('',*,*,#472955,.T.); +#472955 = EDGE_CURVE('',#472948,#472956,#472958,.T.); +#472956 = VERTEX_POINT('',#472957); +#472957 = CARTESIAN_POINT('',(154.022419,-128.677592,-7.5E-02)); +#472958 = LINE('',#472959,#472960); +#472959 = CARTESIAN_POINT('',(154.022419,-128.796842,-7.5E-02)); +#472960 = VECTOR('',#472961,1.); +#472961 = DIRECTION('',(0.,1.,0.)); +#472962 = ORIENTED_EDGE('',*,*,#472963,.T.); +#472963 = EDGE_CURVE('',#472956,#472964,#472966,.T.); +#472964 = VERTEX_POINT('',#472965); +#472965 = CARTESIAN_POINT('',(153.987532,-128.607818,-7.5E-02)); +#472966 = LINE('',#472967,#472968); +#472967 = CARTESIAN_POINT('',(154.022419,-128.677592,-7.5E-02)); +#472968 = VECTOR('',#472969,1.); +#472969 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#472970 = ORIENTED_EDGE('',*,*,#472971,.T.); +#472971 = EDGE_CURVE('',#472964,#472972,#472974,.T.); +#472972 = VERTEX_POINT('',#472973); +#472973 = CARTESIAN_POINT('',(153.917759,-128.572932,-7.5E-02)); +#472974 = LINE('',#472975,#472976); +#472975 = CARTESIAN_POINT('',(153.987532,-128.607818,-7.5E-02)); +#472976 = VECTOR('',#472977,1.); +#472977 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#472978 = ORIENTED_EDGE('',*,*,#472979,.T.); +#472979 = EDGE_CURVE('',#472972,#472831,#472980,.T.); +#472980 = LINE('',#472981,#472982); +#472981 = CARTESIAN_POINT('',(153.917759,-128.572932,-7.5E-02)); +#472982 = VECTOR('',#472983,1.); +#472983 = DIRECTION('',(-1.,0.,0.)); +#472984 = PLANE('',#472985); +#472985 = AXIS2_PLACEMENT_3D('',#472986,#472987,#472988); +#472986 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#472987 = DIRECTION('',(-0.,-0.,-1.)); +#472988 = DIRECTION('',(-1.,0.,0.)); +#472989 = SHELL_BASED_SURFACE_MODEL('',(#472990)); +#472990 = OPEN_SHELL('',(#472991)); +#472991 = ADVANCED_FACE('',(#472992),#473028,.T.); +#472992 = FACE_BOUND('',#472993,.T.); +#472993 = EDGE_LOOP('',(#472994,#473005,#473013,#473022)); +#472994 = ORIENTED_EDGE('',*,*,#472995,.T.); +#472995 = EDGE_CURVE('',#472996,#472998,#473000,.T.); +#472996 = VERTEX_POINT('',#472997); +#472997 = CARTESIAN_POINT('',(147.006359,-128.58,-7.5E-02)); +#472998 = VERTEX_POINT('',#472999); +#472999 = CARTESIAN_POINT('',(147.006359,-128.46,-7.5E-02)); +#473000 = CIRCLE('',#473001,6.000000000042E-02); +#473001 = AXIS2_PLACEMENT_3D('',#473002,#473003,#473004); +#473002 = CARTESIAN_POINT('',(147.00635877441,-128.52,-7.5E-02)); +#473003 = DIRECTION('',(0.,0.,-1.)); +#473004 = DIRECTION('',(3.75979377999E-06,-0.999999999993,0.)); +#473005 = ORIENTED_EDGE('',*,*,#473006,.T.); +#473006 = EDGE_CURVE('',#472998,#473007,#473009,.T.); +#473007 = VERTEX_POINT('',#473008); +#473008 = CARTESIAN_POINT('',(147.313641,-128.46,-7.5E-02)); +#473009 = LINE('',#473010,#473011); +#473010 = CARTESIAN_POINT('',(147.006359,-128.46,-7.5E-02)); +#473011 = VECTOR('',#473012,1.); +#473012 = DIRECTION('',(1.,0.,0.)); +#473013 = ORIENTED_EDGE('',*,*,#473014,.T.); +#473014 = EDGE_CURVE('',#473007,#473015,#473017,.T.); +#473015 = VERTEX_POINT('',#473016); +#473016 = CARTESIAN_POINT('',(147.313641,-128.58,-7.5E-02)); +#473017 = CIRCLE('',#473018,6.000000000042E-02); +#473018 = AXIS2_PLACEMENT_3D('',#473019,#473020,#473021); +#473019 = CARTESIAN_POINT('',(147.31364122558,-128.52,-7.5E-02)); +#473020 = DIRECTION('',(0.,0.,-1.)); +#473021 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#473022 = ORIENTED_EDGE('',*,*,#473023,.T.); +#473023 = EDGE_CURVE('',#473015,#472996,#473024,.T.); +#473024 = LINE('',#473025,#473026); +#473025 = CARTESIAN_POINT('',(147.313641,-128.58,-7.5E-02)); +#473026 = VECTOR('',#473027,1.); +#473027 = DIRECTION('',(-1.,0.,0.)); +#473028 = PLANE('',#473029); +#473029 = AXIS2_PLACEMENT_3D('',#473030,#473031,#473032); +#473030 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473031 = DIRECTION('',(-0.,-0.,-1.)); +#473032 = DIRECTION('',(-1.,0.,0.)); +#473033 = SHELL_BASED_SURFACE_MODEL('',(#473034)); +#473034 = OPEN_SHELL('',(#473035)); +#473035 = ADVANCED_FACE('',(#473036),#473314,.T.); +#473036 = FACE_BOUND('',#473037,.T.); +#473037 = EDGE_LOOP('',(#473038,#473049,#473057,#473065,#473073,#473081, + #473089,#473097,#473105,#473113,#473121,#473129,#473137,#473146, + #473154,#473162,#473170,#473179,#473187,#473195,#473203,#473211, + #473219,#473227,#473235,#473243,#473251,#473259,#473267,#473275, + #473284,#473292,#473300,#473308)); +#473038 = ORIENTED_EDGE('',*,*,#473039,.T.); +#473039 = EDGE_CURVE('',#473040,#473042,#473044,.T.); +#473040 = VERTEX_POINT('',#473041); +#473041 = CARTESIAN_POINT('',(152.364982,-128.097908,-7.5E-02)); +#473042 = VERTEX_POINT('',#473043); +#473043 = CARTESIAN_POINT('',(152.459577,-128.072002,-7.5E-02)); +#473044 = CIRCLE('',#473045,4.999982421473E-02); +#473045 = AXIS2_PLACEMENT_3D('',#473046,#473047,#473048); +#473046 = CARTESIAN_POINT('',(152.41485599487,-128.0943629955,-7.5E-02) + ); +#473047 = DIRECTION('',(0.,0.,-1.)); +#473048 = DIRECTION('',(-0.9974834044,-7.090033812349E-02,-0.)); +#473049 = ORIENTED_EDGE('',*,*,#473050,.T.); +#473050 = EDGE_CURVE('',#473042,#473051,#473053,.T.); +#473051 = VERTEX_POINT('',#473052); +#473052 = CARTESIAN_POINT('',(152.510232,-128.178328,-7.5E-02)); +#473053 = LINE('',#473054,#473055); +#473054 = CARTESIAN_POINT('',(152.459577,-128.072002,-7.5E-02)); +#473055 = VECTOR('',#473056,1.); +#473056 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#473057 = ORIENTED_EDGE('',*,*,#473058,.T.); +#473058 = EDGE_CURVE('',#473051,#473059,#473061,.T.); +#473059 = VERTEX_POINT('',#473060); +#473060 = CARTESIAN_POINT('',(152.510232,-128.391349,-7.5E-02)); +#473061 = LINE('',#473062,#473063); +#473062 = CARTESIAN_POINT('',(152.510232,-128.178328,-7.5E-02)); +#473063 = VECTOR('',#473064,1.); +#473064 = DIRECTION('',(0.,-1.,0.)); +#473065 = ORIENTED_EDGE('',*,*,#473066,.T.); +#473066 = EDGE_CURVE('',#473059,#473067,#473069,.T.); +#473067 = VERTEX_POINT('',#473068); +#473068 = CARTESIAN_POINT('',(152.452628,-128.508075,-7.5E-02)); +#473069 = LINE('',#473070,#473071); +#473070 = CARTESIAN_POINT('',(152.510232,-128.391349,-7.5E-02)); +#473071 = VECTOR('',#473072,1.); +#473072 = DIRECTION('',(-0.442542699539,-0.896747433275,0.)); +#473073 = ORIENTED_EDGE('',*,*,#473074,.T.); +#473074 = EDGE_CURVE('',#473067,#473075,#473077,.T.); +#473075 = VERTEX_POINT('',#473076); +#473076 = CARTESIAN_POINT('',(152.437216,-128.520037,-7.5E-02)); +#473077 = LINE('',#473078,#473079); +#473078 = CARTESIAN_POINT('',(152.452628,-128.508075,-7.5E-02)); +#473079 = VECTOR('',#473080,1.); +#473080 = DIRECTION('',(-0.789975570356,-0.613138319012,0.)); +#473081 = ORIENTED_EDGE('',*,*,#473082,.T.); +#473082 = EDGE_CURVE('',#473075,#473083,#473085,.T.); +#473083 = VERTEX_POINT('',#473084); +#473084 = CARTESIAN_POINT('',(152.330885,-128.570692,-7.5E-02)); +#473085 = LINE('',#473086,#473087); +#473086 = CARTESIAN_POINT('',(152.437216,-128.520037,-7.5E-02)); +#473087 = VECTOR('',#473088,1.); +#473088 = DIRECTION('',(-0.902790669215,-0.430080233884,0.)); +#473089 = ORIENTED_EDGE('',*,*,#473090,.T.); +#473090 = EDGE_CURVE('',#473083,#473091,#473093,.T.); +#473091 = VERTEX_POINT('',#473092); +#473092 = CARTESIAN_POINT('',(152.260725,-128.570691,-7.5E-02)); +#473093 = LINE('',#473094,#473095); +#473094 = CARTESIAN_POINT('',(152.330885,-128.570692,-7.5E-02)); +#473095 = VECTOR('',#473096,1.); +#473096 = DIRECTION('',(-0.999999999898,1.425313565242E-05,0.)); +#473097 = ORIENTED_EDGE('',*,*,#473098,.T.); +#473098 = EDGE_CURVE('',#473091,#473099,#473101,.T.); +#473099 = VERTEX_POINT('',#473100); +#473100 = CARTESIAN_POINT('',(152.144,-128.513087,-7.5E-02)); +#473101 = LINE('',#473102,#473103); +#473102 = CARTESIAN_POINT('',(152.260725,-128.570691,-7.5E-02)); +#473103 = VECTOR('',#473104,1.); +#473104 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#473105 = ORIENTED_EDGE('',*,*,#473106,.T.); +#473106 = EDGE_CURVE('',#473099,#473107,#473109,.T.); +#473107 = VERTEX_POINT('',#473108); +#473108 = CARTESIAN_POINT('',(152.132038,-128.497675,-7.5E-02)); +#473109 = LINE('',#473110,#473111); +#473110 = CARTESIAN_POINT('',(152.144,-128.513087,-7.5E-02)); +#473111 = VECTOR('',#473112,1.); +#473112 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#473113 = ORIENTED_EDGE('',*,*,#473114,.T.); +#473114 = EDGE_CURVE('',#473107,#473115,#473117,.T.); +#473115 = VERTEX_POINT('',#473116); +#473116 = CARTESIAN_POINT('',(152.081383,-128.391349,-7.5E-02)); +#473117 = LINE('',#473118,#473119); +#473118 = CARTESIAN_POINT('',(152.132038,-128.497675,-7.5E-02)); +#473119 = VECTOR('',#473120,1.); +#473120 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#473121 = ORIENTED_EDGE('',*,*,#473122,.T.); +#473122 = EDGE_CURVE('',#473115,#473123,#473125,.T.); +#473123 = VERTEX_POINT('',#473124); +#473124 = CARTESIAN_POINT('',(152.079141,-128.249023,-7.5E-02)); +#473125 = LINE('',#473126,#473127); +#473126 = CARTESIAN_POINT('',(152.081383,-128.391349,-7.5E-02)); +#473127 = VECTOR('',#473128,1.); +#473128 = DIRECTION('',(-1.575061396373E-02,0.999875951386,0.)); +#473129 = ORIENTED_EDGE('',*,*,#473130,.T.); +#473130 = EDGE_CURVE('',#473123,#473131,#473133,.T.); +#473131 = VERTEX_POINT('',#473132); +#473132 = CARTESIAN_POINT('',(152.044254,-128.179249,-7.5E-02)); +#473133 = LINE('',#473134,#473135); +#473134 = CARTESIAN_POINT('',(152.079141,-128.249023,-7.5E-02)); +#473135 = VECTOR('',#473136,1.); +#473136 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#473137 = ORIENTED_EDGE('',*,*,#473138,.T.); +#473138 = EDGE_CURVE('',#473131,#473139,#473141,.T.); +#473139 = VERTEX_POINT('',#473140); +#473140 = CARTESIAN_POINT('',(151.880694,-128.179249,-7.5E-02)); +#473141 = CIRCLE('',#473142,0.111877522228); +#473142 = AXIS2_PLACEMENT_3D('',#473143,#473144,#473145); +#473143 = CARTESIAN_POINT('',(151.962474,-128.2555943441,-7.5E-02)); +#473144 = DIRECTION('',(0.,0.,1.)); +#473145 = DIRECTION('',(0.73097793347,0.682401099632,-0.)); +#473146 = ORIENTED_EDGE('',*,*,#473147,.T.); +#473147 = EDGE_CURVE('',#473139,#473148,#473150,.T.); +#473148 = VERTEX_POINT('',#473149); +#473149 = CARTESIAN_POINT('',(151.845808,-128.249023,-7.5E-02)); +#473150 = LINE('',#473151,#473152); +#473151 = CARTESIAN_POINT('',(151.880694,-128.179249,-7.5E-02)); +#473152 = VECTOR('',#473153,1.); +#473153 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#473154 = ORIENTED_EDGE('',*,*,#473155,.T.); +#473155 = EDGE_CURVE('',#473148,#473156,#473158,.T.); +#473156 = VERTEX_POINT('',#473157); +#473157 = CARTESIAN_POINT('',(151.845808,-128.368274,-7.5E-02)); +#473158 = LINE('',#473159,#473160); +#473159 = CARTESIAN_POINT('',(151.845808,-128.249023,-7.5E-02)); +#473160 = VECTOR('',#473161,1.); +#473161 = DIRECTION('',(0.,-1.,0.)); +#473162 = ORIENTED_EDGE('',*,*,#473163,.T.); +#473163 = EDGE_CURVE('',#473156,#473164,#473166,.T.); +#473164 = VERTEX_POINT('',#473165); +#473165 = CARTESIAN_POINT('',(151.888148,-128.452954,-7.5E-02)); +#473166 = LINE('',#473167,#473168); +#473167 = CARTESIAN_POINT('',(151.845808,-128.368274,-7.5E-02)); +#473168 = VECTOR('',#473169,1.); +#473169 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#473170 = ORIENTED_EDGE('',*,*,#473171,.T.); +#473171 = EDGE_CURVE('',#473164,#473172,#473174,.T.); +#473172 = VERTEX_POINT('',#473173); +#473173 = CARTESIAN_POINT('',(151.798705,-128.497675,-7.5E-02)); +#473174 = CIRCLE('',#473175,5.000004522504E-02); +#473175 = AXIS2_PLACEMENT_3D('',#473176,#473177,#473178); +#473176 = CARTESIAN_POINT('',(151.84342653675,-128.4753145735,-7.5E-02) + ); +#473177 = DIRECTION('',(0.,0.,-1.)); +#473178 = DIRECTION('',(0.894428455807,0.447211065876,0.)); +#473179 = ORIENTED_EDGE('',*,*,#473180,.T.); +#473180 = EDGE_CURVE('',#473172,#473181,#473183,.T.); +#473181 = VERTEX_POINT('',#473182); +#473182 = CARTESIAN_POINT('',(151.74805,-128.391349,-7.5E-02)); +#473183 = LINE('',#473184,#473185); +#473184 = CARTESIAN_POINT('',(151.798705,-128.497675,-7.5E-02)); +#473185 = VECTOR('',#473186,1.); +#473186 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#473187 = ORIENTED_EDGE('',*,*,#473188,.T.); +#473188 = EDGE_CURVE('',#473181,#473189,#473191,.T.); +#473189 = VERTEX_POINT('',#473190); +#473190 = CARTESIAN_POINT('',(151.74805,-128.225947,-7.5E-02)); +#473191 = LINE('',#473192,#473193); +#473192 = CARTESIAN_POINT('',(151.74805,-128.391349,-7.5E-02)); +#473193 = VECTOR('',#473194,1.); +#473194 = DIRECTION('',(0.,1.,0.)); +#473195 = ORIENTED_EDGE('',*,*,#473196,.T.); +#473196 = EDGE_CURVE('',#473189,#473197,#473199,.T.); +#473197 = VERTEX_POINT('',#473198); +#473198 = CARTESIAN_POINT('',(151.805654,-128.109222,-7.5E-02)); +#473199 = LINE('',#473200,#473201); +#473200 = CARTESIAN_POINT('',(151.74805,-128.225947,-7.5E-02)); +#473201 = VECTOR('',#473202,1.); +#473202 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#473203 = ORIENTED_EDGE('',*,*,#473204,.T.); +#473204 = EDGE_CURVE('',#473197,#473205,#473207,.T.); +#473205 = VERTEX_POINT('',#473206); +#473206 = CARTESIAN_POINT('',(151.821066,-128.097261,-7.5E-02)); +#473207 = LINE('',#473208,#473209); +#473208 = CARTESIAN_POINT('',(151.805654,-128.109222,-7.5E-02)); +#473209 = VECTOR('',#473210,1.); +#473210 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#473211 = ORIENTED_EDGE('',*,*,#473212,.T.); +#473212 = EDGE_CURVE('',#473205,#473213,#473215,.T.); +#473213 = VERTEX_POINT('',#473214); +#473214 = CARTESIAN_POINT('',(151.927392,-128.046605,-7.5E-02)); +#473215 = LINE('',#473216,#473217); +#473216 = CARTESIAN_POINT('',(151.821066,-128.097261,-7.5E-02)); +#473217 = VECTOR('',#473218,1.); +#473218 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#473219 = ORIENTED_EDGE('',*,*,#473220,.T.); +#473220 = EDGE_CURVE('',#473213,#473221,#473223,.T.); +#473221 = VERTEX_POINT('',#473222); +#473222 = CARTESIAN_POINT('',(151.98874,-128.044851,-7.5E-02)); +#473223 = LINE('',#473224,#473225); +#473224 = CARTESIAN_POINT('',(151.927392,-128.046605,-7.5E-02)); +#473225 = VECTOR('',#473226,1.); +#473226 = DIRECTION('',(0.999591528081,2.85793104952E-02,0.)); +#473227 = ORIENTED_EDGE('',*,*,#473228,.T.); +#473228 = EDGE_CURVE('',#473221,#473229,#473231,.T.); +#473229 = VERTEX_POINT('',#473230); +#473230 = CARTESIAN_POINT('',(152.008645,-128.049642,-7.5E-02)); +#473231 = LINE('',#473232,#473233); +#473232 = CARTESIAN_POINT('',(151.98874,-128.044851,-7.5E-02)); +#473233 = VECTOR('',#473234,1.); +#473234 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#473235 = ORIENTED_EDGE('',*,*,#473236,.T.); +#473236 = EDGE_CURVE('',#473229,#473237,#473239,.T.); +#473237 = VERTEX_POINT('',#473238); +#473238 = CARTESIAN_POINT('',(152.116473,-128.107032,-7.5E-02)); +#473239 = LINE('',#473240,#473241); +#473240 = CARTESIAN_POINT('',(152.008645,-128.049642,-7.5E-02)); +#473241 = VECTOR('',#473242,1.); +#473242 = DIRECTION('',(0.882754645264,-0.469834264678,0.)); +#473243 = ORIENTED_EDGE('',*,*,#473244,.T.); +#473244 = EDGE_CURVE('',#473237,#473245,#473247,.T.); +#473245 = VERTEX_POINT('',#473246); +#473246 = CARTESIAN_POINT('',(152.175335,-128.218086,-7.5E-02)); +#473247 = LINE('',#473248,#473249); +#473248 = CARTESIAN_POINT('',(152.116473,-128.107032,-7.5E-02)); +#473249 = VECTOR('',#473250,1.); +#473250 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#473251 = ORIENTED_EDGE('',*,*,#473252,.T.); +#473252 = EDGE_CURVE('',#473245,#473253,#473255,.T.); +#473253 = VERTEX_POINT('',#473254); +#473254 = CARTESIAN_POINT('',(152.179141,-128.23722,-7.5E-02)); +#473255 = LINE('',#473256,#473257); +#473256 = CARTESIAN_POINT('',(152.175335,-128.218086,-7.5E-02)); +#473257 = VECTOR('',#473258,1.); +#473258 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#473259 = ORIENTED_EDGE('',*,*,#473260,.T.); +#473260 = EDGE_CURVE('',#473253,#473261,#473263,.T.); +#473261 = VERTEX_POINT('',#473262); +#473262 = CARTESIAN_POINT('',(152.179141,-128.368274,-7.5E-02)); +#473263 = LINE('',#473264,#473265); +#473264 = CARTESIAN_POINT('',(152.179141,-128.23722,-7.5E-02)); +#473265 = VECTOR('',#473266,1.); +#473266 = DIRECTION('',(0.,-1.,0.)); +#473267 = ORIENTED_EDGE('',*,*,#473268,.T.); +#473268 = EDGE_CURVE('',#473261,#473269,#473271,.T.); +#473269 = VERTEX_POINT('',#473270); +#473270 = CARTESIAN_POINT('',(152.214027,-128.438047,-7.5E-02)); +#473271 = LINE('',#473272,#473273); +#473272 = CARTESIAN_POINT('',(152.179141,-128.368274,-7.5E-02)); +#473273 = VECTOR('',#473274,1.); +#473274 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#473275 = ORIENTED_EDGE('',*,*,#473276,.T.); +#473276 = EDGE_CURVE('',#473269,#473277,#473279,.T.); +#473277 = VERTEX_POINT('',#473278); +#473278 = CARTESIAN_POINT('',(152.377588,-128.438047,-7.5E-02)); +#473279 = CIRCLE('',#473280,0.111876864088); +#473280 = AXIS2_PLACEMENT_3D('',#473281,#473282,#473283); +#473281 = CARTESIAN_POINT('',(152.2958075,-128.3617031558,-7.5E-02)); +#473282 = DIRECTION('',(0.,0.,1.)); +#473283 = DIRECTION('',(-0.730986702803,-0.682391705932,0.)); +#473284 = ORIENTED_EDGE('',*,*,#473285,.T.); +#473285 = EDGE_CURVE('',#473277,#473286,#473288,.T.); +#473286 = VERTEX_POINT('',#473287); +#473287 = CARTESIAN_POINT('',(152.412475,-128.368273,-7.5E-02)); +#473288 = LINE('',#473289,#473290); +#473289 = CARTESIAN_POINT('',(152.377588,-128.438047,-7.5E-02)); +#473290 = VECTOR('',#473291,1.); +#473291 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#473292 = ORIENTED_EDGE('',*,*,#473293,.T.); +#473293 = EDGE_CURVE('',#473286,#473294,#473296,.T.); +#473294 = VERTEX_POINT('',#473295); +#473295 = CARTESIAN_POINT('',(152.412475,-128.201404,-7.5E-02)); +#473296 = LINE('',#473297,#473298); +#473297 = CARTESIAN_POINT('',(152.412475,-128.368273,-7.5E-02)); +#473298 = VECTOR('',#473299,1.); +#473299 = DIRECTION('',(0.,1.,0.)); +#473300 = ORIENTED_EDGE('',*,*,#473301,.T.); +#473301 = EDGE_CURVE('',#473294,#473302,#473304,.T.); +#473302 = VERTEX_POINT('',#473303); +#473303 = CARTESIAN_POINT('',(152.370135,-128.116724,-7.5E-02)); +#473304 = LINE('',#473305,#473306); +#473305 = CARTESIAN_POINT('',(152.412475,-128.201404,-7.5E-02)); +#473306 = VECTOR('',#473307,1.); +#473307 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#473308 = ORIENTED_EDGE('',*,*,#473309,.T.); +#473309 = EDGE_CURVE('',#473302,#473040,#473310,.T.); +#473310 = LINE('',#473311,#473312); +#473311 = CARTESIAN_POINT('',(152.370135,-128.116724,-7.5E-02)); +#473312 = VECTOR('',#473313,1.); +#473313 = DIRECTION('',(-0.26413652018,0.964485302484,0.)); +#473314 = PLANE('',#473315); +#473315 = AXIS2_PLACEMENT_3D('',#473316,#473317,#473318); +#473316 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473317 = DIRECTION('',(-0.,-0.,-1.)); +#473318 = DIRECTION('',(-1.,0.,0.)); +#473319 = SHELL_BASED_SURFACE_MODEL('',(#473320)); +#473320 = OPEN_SHELL('',(#473321)); +#473321 = ADVANCED_FACE('',(#473322),#473408,.T.); +#473322 = FACE_BOUND('',#473323,.T.); +#473323 = EDGE_LOOP('',(#473324,#473335,#473343,#473352,#473360,#473369, + #473377,#473385,#473393,#473402)); +#473324 = ORIENTED_EDGE('',*,*,#473325,.T.); +#473325 = EDGE_CURVE('',#473326,#473328,#473330,.T.); +#473326 = VERTEX_POINT('',#473327); +#473327 = CARTESIAN_POINT('',(149.19,-124.44,-7.5E-02)); +#473328 = VERTEX_POINT('',#473329); +#473329 = CARTESIAN_POINT('',(149.25,-124.38,-7.5E-02)); +#473330 = CIRCLE('',#473331,5.999932016264E-02); +#473331 = AXIS2_PLACEMENT_3D('',#473332,#473333,#473334); +#473332 = CARTESIAN_POINT('',(149.24999932015,-124.4399993201,-7.5E-02) + ); +#473333 = DIRECTION('',(0.,0.,-1.)); +#473334 = DIRECTION('',(-0.999999999936,-1.133081541086E-05,-0.)); +#473335 = ORIENTED_EDGE('',*,*,#473336,.T.); +#473336 = EDGE_CURVE('',#473328,#473337,#473339,.T.); +#473337 = VERTEX_POINT('',#473338); +#473338 = CARTESIAN_POINT('',(151.25,-124.38,-7.5E-02)); +#473339 = LINE('',#473340,#473341); +#473340 = CARTESIAN_POINT('',(149.25,-124.38,-7.5E-02)); +#473341 = VECTOR('',#473342,1.); +#473342 = DIRECTION('',(1.,0.,0.)); +#473343 = ORIENTED_EDGE('',*,*,#473344,.T.); +#473344 = EDGE_CURVE('',#473337,#473345,#473347,.T.); +#473345 = VERTEX_POINT('',#473346); +#473346 = CARTESIAN_POINT('',(151.31,-124.44,-7.5E-02)); +#473347 = CIRCLE('',#473348,5.999932016262E-02); +#473348 = AXIS2_PLACEMENT_3D('',#473349,#473350,#473351); +#473349 = CARTESIAN_POINT('',(151.25000067984,-124.4399993201,-7.5E-02) + ); +#473350 = DIRECTION('',(0.,0.,-1.)); +#473351 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#473352 = ORIENTED_EDGE('',*,*,#473353,.T.); +#473353 = EDGE_CURVE('',#473345,#473354,#473356,.T.); +#473354 = VERTEX_POINT('',#473355); +#473355 = CARTESIAN_POINT('',(151.31,-128.45,-7.5E-02)); +#473356 = LINE('',#473357,#473358); +#473357 = CARTESIAN_POINT('',(151.31,-124.44,-7.5E-02)); +#473358 = VECTOR('',#473359,1.); +#473359 = DIRECTION('',(0.,-1.,0.)); +#473360 = ORIENTED_EDGE('',*,*,#473361,.T.); +#473361 = EDGE_CURVE('',#473354,#473362,#473364,.T.); +#473362 = VERTEX_POINT('',#473363); +#473363 = CARTESIAN_POINT('',(151.19,-128.45,-7.5E-02)); +#473364 = CIRCLE('',#473365,6.000000000043E-02); +#473365 = AXIS2_PLACEMENT_3D('',#473366,#473367,#473368); +#473366 = CARTESIAN_POINT('',(151.25,-128.4500002255,-7.5E-02)); +#473367 = DIRECTION('',(0.,0.,-1.)); +#473368 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#473369 = ORIENTED_EDGE('',*,*,#473370,.T.); +#473370 = EDGE_CURVE('',#473362,#473371,#473373,.T.); +#473371 = VERTEX_POINT('',#473372); +#473372 = CARTESIAN_POINT('',(151.19,-124.5,-7.5E-02)); +#473373 = LINE('',#473374,#473375); +#473374 = CARTESIAN_POINT('',(151.19,-128.45,-7.5E-02)); +#473375 = VECTOR('',#473376,1.); +#473376 = DIRECTION('',(0.,1.,0.)); +#473377 = ORIENTED_EDGE('',*,*,#473378,.T.); +#473378 = EDGE_CURVE('',#473371,#473379,#473381,.T.); +#473379 = VERTEX_POINT('',#473380); +#473380 = CARTESIAN_POINT('',(149.31,-124.5,-7.5E-02)); +#473381 = LINE('',#473382,#473383); +#473382 = CARTESIAN_POINT('',(151.19,-124.5,-7.5E-02)); +#473383 = VECTOR('',#473384,1.); +#473384 = DIRECTION('',(-1.,0.,0.)); +#473385 = ORIENTED_EDGE('',*,*,#473386,.T.); +#473386 = EDGE_CURVE('',#473379,#473387,#473389,.T.); +#473387 = VERTEX_POINT('',#473388); +#473388 = CARTESIAN_POINT('',(149.31,-128.45,-7.5E-02)); +#473389 = LINE('',#473390,#473391); +#473390 = CARTESIAN_POINT('',(149.31,-124.5,-7.5E-02)); +#473391 = VECTOR('',#473392,1.); +#473392 = DIRECTION('',(0.,-1.,0.)); +#473393 = ORIENTED_EDGE('',*,*,#473394,.T.); +#473394 = EDGE_CURVE('',#473387,#473395,#473397,.T.); +#473395 = VERTEX_POINT('',#473396); +#473396 = CARTESIAN_POINT('',(149.19,-128.45,-7.5E-02)); +#473397 = CIRCLE('',#473398,6.000000000043E-02); +#473398 = AXIS2_PLACEMENT_3D('',#473399,#473400,#473401); +#473399 = CARTESIAN_POINT('',(149.25,-128.4500002255,-7.5E-02)); +#473400 = DIRECTION('',(0.,0.,-1.)); +#473401 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#473402 = ORIENTED_EDGE('',*,*,#473403,.T.); +#473403 = EDGE_CURVE('',#473395,#473326,#473404,.T.); +#473404 = LINE('',#473405,#473406); +#473405 = CARTESIAN_POINT('',(149.19,-128.45,-7.5E-02)); +#473406 = VECTOR('',#473407,1.); +#473407 = DIRECTION('',(0.,1.,0.)); +#473408 = PLANE('',#473409); +#473409 = AXIS2_PLACEMENT_3D('',#473410,#473411,#473412); +#473410 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473411 = DIRECTION('',(-0.,-0.,-1.)); +#473412 = DIRECTION('',(-1.,0.,0.)); +#473413 = SHELL_BASED_SURFACE_MODEL('',(#473414)); +#473414 = OPEN_SHELL('',(#473415)); +#473415 = ADVANCED_FACE('',(#473416,#473509),#473561,.T.); +#473416 = FACE_BOUND('',#473417,.T.); +#473417 = EDGE_LOOP('',(#473418,#473429,#473437,#473446,#473454,#473462, + #473470,#473479,#473487,#473495,#473503)); +#473418 = ORIENTED_EDGE('',*,*,#473419,.T.); +#473419 = EDGE_CURVE('',#473420,#473422,#473424,.T.); +#473420 = VERTEX_POINT('',#473421); +#473421 = CARTESIAN_POINT('',(153.022419,-127.522932,-7.5E-02)); +#473422 = VERTEX_POINT('',#473423); +#473423 = CARTESIAN_POINT('',(153.072419,-127.472932,-7.5E-02)); +#473424 = CIRCLE('',#473425,5.000014378936E-02); +#473425 = AXIS2_PLACEMENT_3D('',#473426,#473427,#473428); +#473426 = CARTESIAN_POINT('',(153.07241914378,-127.5229321437,-7.5E-02) + ); +#473427 = DIRECTION('',(0.,0.,-1.)); +#473428 = DIRECTION('',(-0.999999999996,2.875774470714E-06,0.)); +#473429 = ORIENTED_EDGE('',*,*,#473430,.T.); +#473430 = EDGE_CURVE('',#473422,#473431,#473433,.T.); +#473431 = VERTEX_POINT('',#473432); +#473432 = CARTESIAN_POINT('',(154.072419,-127.472932,-7.5E-02)); +#473433 = LINE('',#473434,#473435); +#473434 = CARTESIAN_POINT('',(153.072419,-127.472932,-7.5E-02)); +#473435 = VECTOR('',#473436,1.); +#473436 = DIRECTION('',(1.,0.,0.)); +#473437 = ORIENTED_EDGE('',*,*,#473438,.T.); +#473438 = EDGE_CURVE('',#473431,#473439,#473441,.T.); +#473439 = VERTEX_POINT('',#473440); +#473440 = CARTESIAN_POINT('',(154.072419,-127.572932,-7.5E-02)); +#473441 = CIRCLE('',#473442,5.000000000002E-02); +#473442 = AXIS2_PLACEMENT_3D('',#473443,#473444,#473445); +#473443 = CARTESIAN_POINT('',(154.07241895228,-127.522932,-7.5E-02)); +#473444 = DIRECTION('',(0.,0.,-1.)); +#473445 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#473446 = ORIENTED_EDGE('',*,*,#473447,.T.); +#473447 = EDGE_CURVE('',#473439,#473448,#473450,.T.); +#473448 = VERTEX_POINT('',#473449); +#473449 = CARTESIAN_POINT('',(153.646228,-127.572932,-7.5E-02)); +#473450 = LINE('',#473451,#473452); +#473451 = CARTESIAN_POINT('',(154.072419,-127.572932,-7.5E-02)); +#473452 = VECTOR('',#473453,1.); +#473453 = DIRECTION('',(-1.,0.,0.)); +#473454 = ORIENTED_EDGE('',*,*,#473455,.T.); +#473455 = EDGE_CURVE('',#473448,#473456,#473458,.T.); +#473456 = VERTEX_POINT('',#473457); +#473457 = CARTESIAN_POINT('',(153.643985,-127.915156,-7.5E-02)); +#473458 = LINE('',#473459,#473460); +#473459 = CARTESIAN_POINT('',(153.646228,-127.572932,-7.5E-02)); +#473460 = VECTOR('',#473461,1.); +#473461 = DIRECTION('',(-6.554045960803E-03,-0.99997852201,0.)); +#473462 = ORIENTED_EDGE('',*,*,#473463,.T.); +#473463 = EDGE_CURVE('',#473456,#473464,#473466,.T.); +#473464 = VERTEX_POINT('',#473465); +#473465 = CARTESIAN_POINT('',(153.583964,-128.034478,-7.5E-02)); +#473466 = LINE('',#473467,#473468); +#473467 = CARTESIAN_POINT('',(153.643985,-127.915156,-7.5E-02)); +#473468 = VECTOR('',#473469,1.); +#473469 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#473470 = ORIENTED_EDGE('',*,*,#473471,.T.); +#473471 = EDGE_CURVE('',#473464,#473472,#473474,.T.); +#473472 = VERTEX_POINT('',#473473); +#473473 = CARTESIAN_POINT('',(153.251622,-128.142117,-7.5E-02)); +#473474 = CIRCLE('',#473475,0.323555964925); +#473475 = AXIS2_PLACEMENT_3D('',#473476,#473477,#473478); +#473476 = CARTESIAN_POINT('',(153.33387326578,-127.8291901847,-7.5E-02) + ); +#473477 = DIRECTION('',(0.,0.,-1.)); +#473478 = DIRECTION('',(0.772944285767,-0.634473901039,0.)); +#473479 = ORIENTED_EDGE('',*,*,#473480,.T.); +#473480 = EDGE_CURVE('',#473472,#473481,#473483,.T.); +#473481 = VERTEX_POINT('',#473482); +#473482 = CARTESIAN_POINT('',(153.132301,-128.082096,-7.5E-02)); +#473483 = LINE('',#473484,#473485); +#473484 = CARTESIAN_POINT('',(153.251622,-128.142117,-7.5E-02)); +#473485 = VECTOR('',#473486,1.); +#473486 = DIRECTION('',(-0.893344973043,0.449371515718,0.)); +#473487 = ORIENTED_EDGE('',*,*,#473488,.T.); +#473488 = EDGE_CURVE('',#473481,#473489,#473491,.T.); +#473489 = VERTEX_POINT('',#473490); +#473490 = CARTESIAN_POINT('',(153.075316,-128.021482,-7.5E-02)); +#473491 = LINE('',#473492,#473493); +#473492 = CARTESIAN_POINT('',(153.132301,-128.082096,-7.5E-02)); +#473493 = VECTOR('',#473494,1.); +#473494 = DIRECTION('',(-0.684960037333,0.728580638815,0.)); +#473495 = ORIENTED_EDGE('',*,*,#473496,.T.); +#473496 = EDGE_CURVE('',#473489,#473497,#473499,.T.); +#473497 = VERTEX_POINT('',#473498); +#473498 = CARTESIAN_POINT('',(153.024661,-127.915156,-7.5E-02)); +#473499 = LINE('',#473500,#473501); +#473500 = CARTESIAN_POINT('',(153.075316,-128.021482,-7.5E-02)); +#473501 = VECTOR('',#473502,1.); +#473502 = DIRECTION('',(-0.430096717347,0.902782816478,0.)); +#473503 = ORIENTED_EDGE('',*,*,#473504,.T.); +#473504 = EDGE_CURVE('',#473497,#473420,#473505,.T.); +#473505 = LINE('',#473506,#473507); +#473506 = CARTESIAN_POINT('',(153.024661,-127.915156,-7.5E-02)); +#473507 = VECTOR('',#473508,1.); +#473508 = DIRECTION('',(-5.716028017892E-03,0.999983663378,0.)); +#473509 = FACE_BOUND('',#473510,.T.); +#473510 = EDGE_LOOP('',(#473511,#473522,#473530,#473538,#473546,#473555) + ); +#473511 = ORIENTED_EDGE('',*,*,#473512,.T.); +#473512 = EDGE_CURVE('',#473513,#473515,#473517,.T.); +#473513 = VERTEX_POINT('',#473514); +#473514 = CARTESIAN_POINT('',(153.393949,-128.04436,-7.5E-02)); +#473515 = VERTEX_POINT('',#473516); +#473516 = CARTESIAN_POINT('',(153.546228,-127.89208,-7.5E-02)); +#473517 = CIRCLE('',#473518,0.215065806118); +#473518 = AXIS2_PLACEMENT_3D('',#473519,#473520,#473521); +#473519 = CARTESIAN_POINT('',(153.33844693076,-127.8365792952,-7.5E-02) + ); +#473520 = DIRECTION('',(0.,0.,1.)); +#473521 = DIRECTION('',(0.258070170409,-0.966126175582,0.)); +#473522 = ORIENTED_EDGE('',*,*,#473523,.T.); +#473523 = EDGE_CURVE('',#473515,#473524,#473526,.T.); +#473524 = VERTEX_POINT('',#473525); +#473525 = CARTESIAN_POINT('',(153.546228,-127.572932,-7.5E-02)); +#473526 = LINE('',#473527,#473528); +#473527 = CARTESIAN_POINT('',(153.546228,-127.89208,-7.5E-02)); +#473528 = VECTOR('',#473529,1.); +#473529 = DIRECTION('',(0.,1.,0.)); +#473530 = ORIENTED_EDGE('',*,*,#473531,.T.); +#473531 = EDGE_CURVE('',#473524,#473532,#473534,.T.); +#473532 = VERTEX_POINT('',#473533); +#473533 = CARTESIAN_POINT('',(153.122419,-127.572932,-7.5E-02)); +#473534 = LINE('',#473535,#473536); +#473535 = CARTESIAN_POINT('',(153.546228,-127.572932,-7.5E-02)); +#473536 = VECTOR('',#473537,1.); +#473537 = DIRECTION('',(-1.,0.,0.)); +#473538 = ORIENTED_EDGE('',*,*,#473539,.T.); +#473539 = EDGE_CURVE('',#473532,#473540,#473542,.T.); +#473540 = VERTEX_POINT('',#473541); +#473541 = CARTESIAN_POINT('',(153.122419,-127.892081,-7.5E-02)); +#473542 = LINE('',#473543,#473544); +#473543 = CARTESIAN_POINT('',(153.122419,-127.572932,-7.5E-02)); +#473544 = VECTOR('',#473545,1.); +#473545 = DIRECTION('',(0.,-1.,0.)); +#473546 = ORIENTED_EDGE('',*,*,#473547,.T.); +#473547 = EDGE_CURVE('',#473540,#473548,#473550,.T.); +#473548 = VERTEX_POINT('',#473549); +#473549 = CARTESIAN_POINT('',(153.274699,-128.04436,-7.5E-02)); +#473550 = CIRCLE('',#473551,0.215060459698); +#473551 = AXIS2_PLACEMENT_3D('',#473552,#473553,#473554); +#473552 = CARTESIAN_POINT('',(153.33019533746,-127.836583298,-7.5E-02)); +#473553 = DIRECTION('',(0.,0.,1.)); +#473554 = DIRECTION('',(-0.966129886234,-0.2580562786,0.)); +#473555 = ORIENTED_EDGE('',*,*,#473556,.T.); +#473556 = EDGE_CURVE('',#473548,#473513,#473557,.T.); +#473557 = LINE('',#473558,#473559); +#473558 = CARTESIAN_POINT('',(153.274699,-128.04436,-7.5E-02)); +#473559 = VECTOR('',#473560,1.); +#473560 = DIRECTION('',(1.,0.,0.)); +#473561 = PLANE('',#473562); +#473562 = AXIS2_PLACEMENT_3D('',#473563,#473564,#473565); +#473563 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473564 = DIRECTION('',(-0.,-0.,-1.)); +#473565 = DIRECTION('',(-1.,0.,0.)); +#473566 = SHELL_BASED_SURFACE_MODEL('',(#473567)); +#473567 = OPEN_SHELL('',(#473568)); +#473568 = ADVANCED_FACE('',(#473569),#473663,.T.); +#473569 = FACE_BOUND('',#473570,.T.); +#473570 = EDGE_LOOP('',(#473571,#473582,#473590,#473599,#473607,#473616, + #473624,#473633,#473641,#473649,#473657)); +#473571 = ORIENTED_EDGE('',*,*,#473572,.T.); +#473572 = EDGE_CURVE('',#473573,#473575,#473577,.T.); +#473573 = VERTEX_POINT('',#473574); +#473574 = CARTESIAN_POINT('',(151.776674,-127.569128,-7.5E-02)); +#473575 = VERTEX_POINT('',#473576); +#473576 = CARTESIAN_POINT('',(151.795808,-127.472934,-7.5E-02)); +#473577 = CIRCLE('',#473578,4.99999845211E-02); +#473578 = AXIS2_PLACEMENT_3D('',#473579,#473580,#473581); +#473579 = CARTESIAN_POINT('',(151.79580803736,-127.5229339845,-7.5E-02) + ); +#473580 = DIRECTION('',(0.,0.,-1.)); +#473581 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#473582 = ORIENTED_EDGE('',*,*,#473583,.T.); +#473583 = EDGE_CURVE('',#473575,#473584,#473586,.T.); +#473584 = VERTEX_POINT('',#473585); +#473585 = CARTESIAN_POINT('',(152.462475,-127.472934,-7.5E-02)); +#473586 = LINE('',#473587,#473588); +#473587 = CARTESIAN_POINT('',(151.795808,-127.472934,-7.5E-02)); +#473588 = VECTOR('',#473589,1.); +#473589 = DIRECTION('',(1.,0.,0.)); +#473590 = ORIENTED_EDGE('',*,*,#473591,.T.); +#473591 = EDGE_CURVE('',#473584,#473592,#473594,.T.); +#473592 = VERTEX_POINT('',#473593); +#473593 = CARTESIAN_POINT('',(152.462475,-127.572934,-7.5E-02)); +#473594 = CIRCLE('',#473595,5.000000000003E-02); +#473595 = AXIS2_PLACEMENT_3D('',#473596,#473597,#473598); +#473596 = CARTESIAN_POINT('',(152.46247495228,-127.522934,-7.5E-02)); +#473597 = DIRECTION('',(0.,0.,-1.)); +#473598 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#473599 = ORIENTED_EDGE('',*,*,#473600,.T.); +#473600 = EDGE_CURVE('',#473592,#473601,#473603,.T.); +#473601 = VERTEX_POINT('',#473602); +#473602 = CARTESIAN_POINT('',(151.998088,-127.572934,-7.5E-02)); +#473603 = LINE('',#473604,#473605); +#473604 = CARTESIAN_POINT('',(152.462475,-127.572934,-7.5E-02)); +#473605 = VECTOR('',#473606,1.); +#473606 = DIRECTION('',(-1.,0.,0.)); +#473607 = ORIENTED_EDGE('',*,*,#473608,.T.); +#473608 = EDGE_CURVE('',#473601,#473609,#473611,.T.); +#473609 = VERTEX_POINT('',#473610); +#473610 = CARTESIAN_POINT('',(151.845808,-127.725213,-7.5E-02)); +#473611 = CIRCLE('',#473612,0.215060043145); +#473612 = AXIS2_PLACEMENT_3D('',#473613,#473614,#473615); +#473613 = CARTESIAN_POINT('',(152.05358399719,-127.7807103616,-7.5E-02) + ); +#473614 = DIRECTION('',(0.,0.,1.)); +#473615 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#473616 = ORIENTED_EDGE('',*,*,#473617,.T.); +#473617 = EDGE_CURVE('',#473609,#473618,#473620,.T.); +#473618 = VERTEX_POINT('',#473619); +#473619 = CARTESIAN_POINT('',(151.845808,-127.808648,-7.5E-02)); +#473620 = LINE('',#473621,#473622); +#473621 = CARTESIAN_POINT('',(151.845808,-127.725213,-7.5E-02)); +#473622 = VECTOR('',#473623,1.); +#473623 = DIRECTION('',(0.,-1.,0.)); +#473624 = ORIENTED_EDGE('',*,*,#473625,.T.); +#473625 = EDGE_CURVE('',#473618,#473626,#473628,.T.); +#473626 = VERTEX_POINT('',#473627); +#473627 = CARTESIAN_POINT('',(151.745808,-127.808648,-7.5E-02)); +#473628 = CIRCLE('',#473629,5.000000000002E-02); +#473629 = AXIS2_PLACEMENT_3D('',#473630,#473631,#473632); +#473630 = CARTESIAN_POINT('',(151.795808,-127.8086479522,-7.5E-02)); +#473631 = DIRECTION('',(-0.,0.,-1.)); +#473632 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#473633 = ORIENTED_EDGE('',*,*,#473634,.T.); +#473634 = EDGE_CURVE('',#473626,#473635,#473637,.T.); +#473635 = VERTEX_POINT('',#473636); +#473636 = CARTESIAN_POINT('',(151.74805,-127.702137,-7.5E-02)); +#473637 = LINE('',#473638,#473639); +#473638 = CARTESIAN_POINT('',(151.745808,-127.808648,-7.5E-02)); +#473639 = VECTOR('',#473640,1.); +#473640 = DIRECTION('',(2.104480731703E-02,0.999778533519,0.)); +#473641 = ORIENTED_EDGE('',*,*,#473642,.T.); +#473642 = EDGE_CURVE('',#473635,#473643,#473645,.T.); +#473643 = VERTEX_POINT('',#473644); +#473644 = CARTESIAN_POINT('',(151.808072,-127.582817,-7.5E-02)); +#473645 = LINE('',#473646,#473647); +#473646 = CARTESIAN_POINT('',(151.74805,-127.702137,-7.5E-02)); +#473647 = VECTOR('',#473648,1.); +#473648 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#473649 = ORIENTED_EDGE('',*,*,#473650,.T.); +#473650 = EDGE_CURVE('',#473643,#473651,#473653,.T.); +#473651 = VERTEX_POINT('',#473652); +#473652 = CARTESIAN_POINT('',(151.817955,-127.572934,-7.5E-02)); +#473653 = LINE('',#473654,#473655); +#473654 = CARTESIAN_POINT('',(151.808072,-127.582817,-7.5E-02)); +#473655 = VECTOR('',#473656,1.); +#473656 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#473657 = ORIENTED_EDGE('',*,*,#473658,.T.); +#473658 = EDGE_CURVE('',#473651,#473573,#473659,.T.); +#473659 = LINE('',#473660,#473661); +#473660 = CARTESIAN_POINT('',(151.817955,-127.572934,-7.5E-02)); +#473661 = VECTOR('',#473662,1.); +#473662 = DIRECTION('',(-0.995776727161,9.180800425308E-02,0.)); +#473663 = PLANE('',#473664); +#473664 = AXIS2_PLACEMENT_3D('',#473665,#473666,#473667); +#473665 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473666 = DIRECTION('',(-0.,-0.,-1.)); +#473667 = DIRECTION('',(-1.,0.,0.)); +#473668 = SHELL_BASED_SURFACE_MODEL('',(#473669)); +#473669 = OPEN_SHELL('',(#473670)); +#473670 = ADVANCED_FACE('',(#473671),#473765,.T.); +#473671 = FACE_BOUND('',#473672,.T.); +#473672 = EDGE_LOOP('',(#473673,#473684,#473692,#473701,#473709,#473718, + #473726,#473735,#473743,#473751,#473759)); +#473673 = ORIENTED_EDGE('',*,*,#473674,.T.); +#473674 = EDGE_CURVE('',#473675,#473677,#473679,.T.); +#473675 = VERTEX_POINT('',#473676); +#473676 = CARTESIAN_POINT('',(147.492067,-126.437039,-7.5E-02)); +#473677 = VERTEX_POINT('',#473678); +#473678 = CARTESIAN_POINT('',(147.6075,-126.46,-7.5E-02)); +#473679 = CIRCLE('',#473680,6.000007318647E-02); +#473680 = AXIS2_PLACEMENT_3D('',#473681,#473682,#473683); +#473681 = CARTESIAN_POINT('',(147.54749992681,-126.4599998233,-7.5E-02) + ); +#473682 = DIRECTION('',(0.,0.,-1.)); +#473683 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#473684 = ORIENTED_EDGE('',*,*,#473685,.T.); +#473685 = EDGE_CURVE('',#473677,#473686,#473688,.T.); +#473686 = VERTEX_POINT('',#473687); +#473687 = CARTESIAN_POINT('',(147.6075,-127.46,-7.5E-02)); +#473688 = LINE('',#473689,#473690); +#473689 = CARTESIAN_POINT('',(147.6075,-126.46,-7.5E-02)); +#473690 = VECTOR('',#473691,1.); +#473691 = DIRECTION('',(0.,-1.,0.)); +#473692 = ORIENTED_EDGE('',*,*,#473693,.T.); +#473693 = EDGE_CURVE('',#473686,#473694,#473696,.T.); +#473694 = VERTEX_POINT('',#473695); +#473695 = CARTESIAN_POINT('',(147.5475,-127.52,-7.5E-02)); +#473696 = CIRCLE('',#473697,5.999932016253E-02); +#473697 = AXIS2_PLACEMENT_3D('',#473698,#473699,#473700); +#473698 = CARTESIAN_POINT('',(147.54750067984,-127.4600006798,-7.5E-02) + ); +#473699 = DIRECTION('',(0.,0.,-1.)); +#473700 = DIRECTION('',(0.999999999936,1.133081706884E-05,0.)); +#473701 = ORIENTED_EDGE('',*,*,#473702,.T.); +#473702 = EDGE_CURVE('',#473694,#473703,#473705,.T.); +#473703 = VERTEX_POINT('',#473704); +#473704 = CARTESIAN_POINT('',(146.0275,-127.52,-7.5E-02)); +#473705 = LINE('',#473706,#473707); +#473706 = CARTESIAN_POINT('',(147.5475,-127.52,-7.5E-02)); +#473707 = VECTOR('',#473708,1.); +#473708 = DIRECTION('',(-1.,0.,0.)); +#473709 = ORIENTED_EDGE('',*,*,#473710,.T.); +#473710 = EDGE_CURVE('',#473703,#473711,#473713,.T.); +#473711 = VERTEX_POINT('',#473712); +#473712 = CARTESIAN_POINT('',(145.9675,-127.46,-7.5E-02)); +#473713 = CIRCLE('',#473714,5.999932016256E-02); +#473714 = AXIS2_PLACEMENT_3D('',#473715,#473716,#473717); +#473715 = CARTESIAN_POINT('',(146.02749932015,-127.4600006798,-7.5E-02) + ); +#473716 = DIRECTION('',(0.,0.,-1.)); +#473717 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#473718 = ORIENTED_EDGE('',*,*,#473719,.T.); +#473719 = EDGE_CURVE('',#473711,#473720,#473722,.T.); +#473720 = VERTEX_POINT('',#473721); +#473721 = CARTESIAN_POINT('',(145.9675,-127.41,-7.5E-02)); +#473722 = LINE('',#473723,#473724); +#473723 = CARTESIAN_POINT('',(145.9675,-127.46,-7.5E-02)); +#473724 = VECTOR('',#473725,1.); +#473725 = DIRECTION('',(0.,1.,0.)); +#473726 = ORIENTED_EDGE('',*,*,#473727,.T.); +#473727 = EDGE_CURVE('',#473720,#473728,#473730,.T.); +#473728 = VERTEX_POINT('',#473729); +#473729 = CARTESIAN_POINT('',(146.082933,-127.387039,-7.5E-02)); +#473730 = CIRCLE('',#473731,6.000007318647E-02); +#473731 = AXIS2_PLACEMENT_3D('',#473732,#473733,#473734); +#473732 = CARTESIAN_POINT('',(146.02750007318,-127.4099998233,-7.5E-02) + ); +#473733 = DIRECTION('',(0.,0.,-1.)); +#473734 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#473735 = ORIENTED_EDGE('',*,*,#473736,.T.); +#473736 = EDGE_CURVE('',#473728,#473737,#473739,.T.); +#473737 = VERTEX_POINT('',#473738); +#473738 = CARTESIAN_POINT('',(146.085511,-127.4,-7.5E-02)); +#473739 = LINE('',#473740,#473741); +#473740 = CARTESIAN_POINT('',(146.082933,-127.387039,-7.5E-02)); +#473741 = VECTOR('',#473742,1.); +#473742 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#473743 = ORIENTED_EDGE('',*,*,#473744,.T.); +#473744 = EDGE_CURVE('',#473737,#473745,#473747,.T.); +#473745 = VERTEX_POINT('',#473746); +#473746 = CARTESIAN_POINT('',(147.4875,-127.4,-7.5E-02)); +#473747 = LINE('',#473748,#473749); +#473748 = CARTESIAN_POINT('',(146.085511,-127.4,-7.5E-02)); +#473749 = VECTOR('',#473750,1.); +#473750 = DIRECTION('',(1.,0.,0.)); +#473751 = ORIENTED_EDGE('',*,*,#473752,.T.); +#473752 = EDGE_CURVE('',#473745,#473753,#473755,.T.); +#473753 = VERTEX_POINT('',#473754); +#473754 = CARTESIAN_POINT('',(147.4875,-126.46,-7.5E-02)); +#473755 = LINE('',#473756,#473757); +#473756 = CARTESIAN_POINT('',(147.4875,-127.4,-7.5E-02)); +#473757 = VECTOR('',#473758,1.); +#473758 = DIRECTION('',(0.,1.,0.)); +#473759 = ORIENTED_EDGE('',*,*,#473760,.T.); +#473760 = EDGE_CURVE('',#473753,#473675,#473761,.T.); +#473761 = LINE('',#473762,#473763); +#473762 = CARTESIAN_POINT('',(147.4875,-126.46,-7.5E-02)); +#473763 = VECTOR('',#473764,1.); +#473764 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#473765 = PLANE('',#473766); +#473766 = AXIS2_PLACEMENT_3D('',#473767,#473768,#473769); +#473767 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#473768 = DIRECTION('',(-0.,-0.,-1.)); +#473769 = DIRECTION('',(-1.,0.,0.)); +#473770 = SHELL_BASED_SURFACE_MODEL('',(#473771)); +#473771 = OPEN_SHELL('',(#473772)); +#473772 = ADVANCED_FACE('',(#473773,#473953),#474004,.T.); +#473773 = FACE_BOUND('',#473774,.T.); +#473774 = EDGE_LOOP('',(#473775,#473785,#473793,#473801,#473809,#473817, + #473825,#473833,#473841,#473850,#473858,#473866,#473874,#473882, + #473890,#473898,#473906,#473914,#473922,#473930,#473938,#473947)); +#473775 = ORIENTED_EDGE('',*,*,#473776,.T.); +#473776 = EDGE_CURVE('',#473777,#473779,#473781,.T.); +#473777 = VERTEX_POINT('',#473778); +#473778 = CARTESIAN_POINT('',(151.821066,-126.62107,-7.5E-02)); +#473779 = VERTEX_POINT('',#473780); +#473780 = CARTESIAN_POINT('',(151.927392,-126.570414,-7.5E-02)); +#473781 = LINE('',#473782,#473783); +#473782 = CARTESIAN_POINT('',(151.821066,-126.62107,-7.5E-02)); +#473783 = VECTOR('',#473784,1.); +#473784 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#473785 = ORIENTED_EDGE('',*,*,#473786,.T.); +#473786 = EDGE_CURVE('',#473779,#473787,#473789,.T.); +#473787 = VERTEX_POINT('',#473788); +#473788 = CARTESIAN_POINT('',(152.322073,-126.56866,-7.5E-02)); +#473789 = LINE('',#473790,#473791); +#473790 = CARTESIAN_POINT('',(151.927392,-126.570414,-7.5E-02)); +#473791 = VECTOR('',#473792,1.); +#473792 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#473793 = ORIENTED_EDGE('',*,*,#473794,.T.); +#473794 = EDGE_CURVE('',#473787,#473795,#473797,.T.); +#473795 = VERTEX_POINT('',#473796); +#473796 = CARTESIAN_POINT('',(152.341977,-126.573451,-7.5E-02)); +#473797 = LINE('',#473798,#473799); +#473798 = CARTESIAN_POINT('',(152.322073,-126.56866,-7.5E-02)); +#473799 = VECTOR('',#473800,1.); +#473800 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#473801 = ORIENTED_EDGE('',*,*,#473802,.T.); +#473802 = EDGE_CURVE('',#473795,#473803,#473805,.T.); +#473803 = VERTEX_POINT('',#473804); +#473804 = CARTESIAN_POINT('',(152.449807,-126.630841,-7.5E-02)); +#473805 = LINE('',#473806,#473807); +#473806 = CARTESIAN_POINT('',(152.341977,-126.573451,-7.5E-02)); +#473807 = VECTOR('',#473808,1.); +#473808 = DIRECTION('',(0.882758259516,-0.469827473928,0.)); +#473809 = ORIENTED_EDGE('',*,*,#473810,.T.); +#473810 = EDGE_CURVE('',#473803,#473811,#473813,.T.); +#473811 = VERTEX_POINT('',#473812); +#473812 = CARTESIAN_POINT('',(152.508669,-126.741895,-7.5E-02)); +#473813 = LINE('',#473814,#473815); +#473814 = CARTESIAN_POINT('',(152.449807,-126.630841,-7.5E-02)); +#473815 = VECTOR('',#473816,1.); +#473816 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#473817 = ORIENTED_EDGE('',*,*,#473818,.T.); +#473818 = EDGE_CURVE('',#473811,#473819,#473821,.T.); +#473819 = VERTEX_POINT('',#473820); +#473820 = CARTESIAN_POINT('',(152.512475,-126.761029,-7.5E-02)); +#473821 = LINE('',#473822,#473823); +#473822 = CARTESIAN_POINT('',(152.508669,-126.741895,-7.5E-02)); +#473823 = VECTOR('',#473824,1.); +#473824 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#473825 = ORIENTED_EDGE('',*,*,#473826,.T.); +#473826 = EDGE_CURVE('',#473819,#473827,#473829,.T.); +#473827 = VERTEX_POINT('',#473828); +#473828 = CARTESIAN_POINT('',(152.510232,-126.962777,-7.5E-02)); +#473829 = LINE('',#473830,#473831); +#473830 = CARTESIAN_POINT('',(152.512475,-126.761029,-7.5E-02)); +#473831 = VECTOR('',#473832,1.); +#473832 = DIRECTION('',(-1.111714311194E-02,-0.999938202655,0.)); +#473833 = ORIENTED_EDGE('',*,*,#473834,.T.); +#473834 = EDGE_CURVE('',#473827,#473835,#473837,.T.); +#473835 = VERTEX_POINT('',#473836); +#473836 = CARTESIAN_POINT('',(152.459577,-127.069104,-7.5E-02)); +#473837 = LINE('',#473838,#473839); +#473838 = CARTESIAN_POINT('',(152.510232,-126.962777,-7.5E-02)); +#473839 = VECTOR('',#473840,1.); +#473840 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#473841 = ORIENTED_EDGE('',*,*,#473842,.T.); +#473842 = EDGE_CURVE('',#473835,#473843,#473845,.T.); +#473843 = VERTEX_POINT('',#473844); +#473844 = CARTESIAN_POINT('',(152.370135,-127.024382,-7.5E-02)); +#473845 = CIRCLE('',#473846,4.999982161968E-02); +#473846 = AXIS2_PLACEMENT_3D('',#473847,#473848,#473849); +#473847 = CARTESIAN_POINT('',(152.41485599642,-127.0467430071,-7.5E-02) + ); +#473848 = DIRECTION('',(-0.,0.,-1.)); +#473849 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#473850 = ORIENTED_EDGE('',*,*,#473851,.T.); +#473851 = EDGE_CURVE('',#473843,#473852,#473854,.T.); +#473852 = VERTEX_POINT('',#473853); +#473853 = CARTESIAN_POINT('',(152.412475,-126.939701,-7.5E-02)); +#473854 = LINE('',#473855,#473856); +#473855 = CARTESIAN_POINT('',(152.370135,-127.024382,-7.5E-02)); +#473856 = VECTOR('',#473857,1.); +#473857 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#473858 = ORIENTED_EDGE('',*,*,#473859,.T.); +#473859 = EDGE_CURVE('',#473852,#473860,#473862,.T.); +#473860 = VERTEX_POINT('',#473861); +#473861 = CARTESIAN_POINT('',(152.412475,-126.772832,-7.5E-02)); +#473862 = LINE('',#473863,#473864); +#473863 = CARTESIAN_POINT('',(152.412475,-126.939701,-7.5E-02)); +#473864 = VECTOR('',#473865,1.); +#473865 = DIRECTION('',(0.,1.,0.)); +#473866 = ORIENTED_EDGE('',*,*,#473867,.T.); +#473867 = EDGE_CURVE('',#473860,#473868,#473870,.T.); +#473868 = VERTEX_POINT('',#473869); +#473869 = CARTESIAN_POINT('',(152.377588,-126.703058,-7.5E-02)); +#473870 = LINE('',#473871,#473872); +#473871 = CARTESIAN_POINT('',(152.412475,-126.772832,-7.5E-02)); +#473872 = VECTOR('',#473873,1.); +#473873 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#473874 = ORIENTED_EDGE('',*,*,#473875,.T.); +#473875 = EDGE_CURVE('',#473868,#473876,#473878,.T.); +#473876 = VERTEX_POINT('',#473877); +#473877 = CARTESIAN_POINT('',(152.307815,-126.668172,-7.5E-02)); +#473878 = LINE('',#473879,#473880); +#473879 = CARTESIAN_POINT('',(152.377588,-126.703058,-7.5E-02)); +#473880 = VECTOR('',#473881,1.); +#473881 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#473882 = ORIENTED_EDGE('',*,*,#473883,.T.); +#473883 = EDGE_CURVE('',#473876,#473884,#473886,.T.); +#473884 = VERTEX_POINT('',#473885); +#473885 = CARTESIAN_POINT('',(152.170131,-126.668172,-7.5E-02)); +#473886 = LINE('',#473887,#473888); +#473887 = CARTESIAN_POINT('',(152.307815,-126.668172,-7.5E-02)); +#473888 = VECTOR('',#473889,1.); +#473889 = DIRECTION('',(-1.,0.,0.)); +#473890 = ORIENTED_EDGE('',*,*,#473891,.T.); +#473891 = EDGE_CURVE('',#473884,#473892,#473894,.T.); +#473892 = VERTEX_POINT('',#473893); +#473893 = CARTESIAN_POINT('',(152.078317,-127.115275,-7.5E-02)); +#473894 = LINE('',#473895,#473896); +#473895 = CARTESIAN_POINT('',(152.170131,-126.668172,-7.5E-02)); +#473896 = VECTOR('',#473897,1.); +#473897 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#473898 = ORIENTED_EDGE('',*,*,#473899,.T.); +#473899 = EDGE_CURVE('',#473892,#473900,#473902,.T.); +#473900 = VERTEX_POINT('',#473901); +#473901 = CARTESIAN_POINT('',(152.053037,-127.140556,-7.5E-02)); +#473902 = LINE('',#473903,#473904); +#473903 = CARTESIAN_POINT('',(152.078317,-127.115275,-7.5E-02)); +#473904 = VECTOR('',#473905,1.); +#473905 = DIRECTION('',(-0.707092795827,-0.70712076627,0.)); +#473906 = ORIENTED_EDGE('',*,*,#473907,.T.); +#473907 = EDGE_CURVE('',#473900,#473908,#473910,.T.); +#473908 = VERTEX_POINT('',#473909); +#473909 = CARTESIAN_POINT('',(152.033903,-127.144362,-7.5E-02)); +#473910 = LINE('',#473911,#473912); +#473911 = CARTESIAN_POINT('',(152.053037,-127.140556,-7.5E-02)); +#473912 = VECTOR('',#473913,1.); +#473913 = DIRECTION('',(-0.980785174845,-0.195090852695,0.)); +#473914 = ORIENTED_EDGE('',*,*,#473915,.T.); +#473915 = EDGE_CURVE('',#473908,#473916,#473918,.T.); +#473916 = VERTEX_POINT('',#473917); +#473917 = CARTESIAN_POINT('',(151.927392,-127.142119,-7.5E-02)); +#473918 = LINE('',#473919,#473920); +#473919 = CARTESIAN_POINT('',(152.033903,-127.144362,-7.5E-02)); +#473920 = VECTOR('',#473921,1.); +#473921 = DIRECTION('',(-0.999778335979,2.105418977953E-02,0.)); +#473922 = ORIENTED_EDGE('',*,*,#473923,.T.); +#473923 = EDGE_CURVE('',#473916,#473924,#473926,.T.); +#473924 = VERTEX_POINT('',#473925); +#473925 = CARTESIAN_POINT('',(151.810667,-127.084515,-7.5E-02)); +#473926 = LINE('',#473927,#473928); +#473927 = CARTESIAN_POINT('',(151.927392,-127.142119,-7.5E-02)); +#473928 = VECTOR('',#473929,1.); +#473929 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#473930 = ORIENTED_EDGE('',*,*,#473931,.T.); +#473931 = EDGE_CURVE('',#473924,#473932,#473934,.T.); +#473932 = VERTEX_POINT('',#473933); +#473933 = CARTESIAN_POINT('',(151.798705,-127.069103,-7.5E-02)); +#473934 = LINE('',#473935,#473936); +#473935 = CARTESIAN_POINT('',(151.810667,-127.084515,-7.5E-02)); +#473936 = VECTOR('',#473937,1.); +#473937 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#473938 = ORIENTED_EDGE('',*,*,#473939,.T.); +#473939 = EDGE_CURVE('',#473932,#473940,#473942,.T.); +#473940 = VERTEX_POINT('',#473941); +#473941 = CARTESIAN_POINT('',(151.805654,-126.633031,-7.5E-02)); +#473942 = CIRCLE('',#473943,0.376597301495); +#473943 = AXIS2_PLACEMENT_3D('',#473944,#473945,#473946); +#473944 = CARTESIAN_POINT('',(152.10918084267,-126.855959202,-7.5E-02)); +#473945 = DIRECTION('',(0.,0.,-1.)); +#473946 = DIRECTION('',(-0.824423970765,-0.565972717035,-0.)); +#473947 = ORIENTED_EDGE('',*,*,#473948,.T.); +#473948 = EDGE_CURVE('',#473940,#473777,#473949,.T.); +#473949 = LINE('',#473950,#473951); +#473950 = CARTESIAN_POINT('',(151.805654,-126.633031,-7.5E-02)); +#473951 = VECTOR('',#473952,1.); +#473952 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#473953 = FACE_BOUND('',#473954,.T.); +#473954 = EDGE_LOOP('',(#473955,#473965,#473973,#473981,#473990,#473998) + ); +#473955 = ORIENTED_EDGE('',*,*,#473956,.T.); +#473956 = EDGE_CURVE('',#473957,#473959,#473961,.T.); +#473957 = VERTEX_POINT('',#473958); +#473958 = CARTESIAN_POINT('',(151.992913,-127.044362,-7.5E-02)); +#473959 = VERTEX_POINT('',#473960); +#473960 = CARTESIAN_POINT('',(152.068151,-126.668172,-7.5E-02)); +#473961 = LINE('',#473962,#473963); +#473962 = CARTESIAN_POINT('',(151.992913,-127.044362,-7.5E-02)); +#473963 = VECTOR('',#473964,1.); +#473964 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#473965 = ORIENTED_EDGE('',*,*,#473966,.T.); +#473966 = EDGE_CURVE('',#473959,#473967,#473969,.T.); +#473967 = VERTEX_POINT('',#473968); +#473968 = CARTESIAN_POINT('',(151.950469,-126.668172,-7.5E-02)); +#473969 = LINE('',#473970,#473971); +#473970 = CARTESIAN_POINT('',(152.068151,-126.668172,-7.5E-02)); +#473971 = VECTOR('',#473972,1.); +#473972 = DIRECTION('',(-1.,0.,0.)); +#473973 = ORIENTED_EDGE('',*,*,#473974,.T.); +#473974 = EDGE_CURVE('',#473967,#473975,#473977,.T.); +#473975 = VERTEX_POINT('',#473976); +#473976 = CARTESIAN_POINT('',(151.880694,-126.703058,-7.5E-02)); +#473977 = LINE('',#473978,#473979); +#473978 = CARTESIAN_POINT('',(151.950469,-126.668172,-7.5E-02)); +#473979 = VECTOR('',#473980,1.); +#473980 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#473981 = ORIENTED_EDGE('',*,*,#473982,.T.); +#473982 = EDGE_CURVE('',#473975,#473983,#473985,.T.); +#473983 = VERTEX_POINT('',#473984); +#473984 = CARTESIAN_POINT('',(151.880694,-127.009475,-7.5E-02)); +#473985 = CIRCLE('',#473986,0.26744056971); +#473986 = AXIS2_PLACEMENT_3D('',#473987,#473988,#473989); +#473987 = CARTESIAN_POINT('',(152.09990078332,-126.8562665,-7.5E-02)); +#473988 = DIRECTION('',(0.,0.,1.)); +#473989 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#473990 = ORIENTED_EDGE('',*,*,#473991,.T.); +#473991 = EDGE_CURVE('',#473983,#473992,#473994,.T.); +#473992 = VERTEX_POINT('',#473993); +#473993 = CARTESIAN_POINT('',(151.950469,-127.044362,-7.5E-02)); +#473994 = LINE('',#473995,#473996); +#473995 = CARTESIAN_POINT('',(151.880694,-127.009475,-7.5E-02)); +#473996 = VECTOR('',#473997,1.); +#473997 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#473998 = ORIENTED_EDGE('',*,*,#473999,.T.); +#473999 = EDGE_CURVE('',#473992,#473957,#474000,.T.); +#474000 = LINE('',#474001,#474002); +#474001 = CARTESIAN_POINT('',(151.950469,-127.044362,-7.5E-02)); +#474002 = VECTOR('',#474003,1.); +#474003 = DIRECTION('',(1.,0.,0.)); +#474004 = PLANE('',#474005); +#474005 = AXIS2_PLACEMENT_3D('',#474006,#474007,#474008); +#474006 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474007 = DIRECTION('',(-0.,-0.,-1.)); +#474008 = DIRECTION('',(-1.,0.,0.)); +#474009 = SHELL_BASED_SURFACE_MODEL('',(#474010)); +#474010 = OPEN_SHELL('',(#474011)); +#474011 = ADVANCED_FACE('',(#474012,#474192),#474243,.T.); +#474012 = FACE_BOUND('',#474013,.T.); +#474013 = EDGE_LOOP('',(#474014,#474024,#474032,#474040,#474048,#474056, + #474064,#474072,#474080,#474089,#474097,#474105,#474113,#474121, + #474129,#474137,#474145,#474153,#474161,#474169,#474177,#474186)); +#474014 = ORIENTED_EDGE('',*,*,#474015,.T.); +#474015 = EDGE_CURVE('',#474016,#474018,#474020,.T.); +#474016 = VERTEX_POINT('',#474017); +#474017 = CARTESIAN_POINT('',(153.43101,-126.621068,-7.5E-02)); +#474018 = VERTEX_POINT('',#474019); +#474019 = CARTESIAN_POINT('',(153.537336,-126.570412,-7.5E-02)); +#474020 = LINE('',#474021,#474022); +#474021 = CARTESIAN_POINT('',(153.43101,-126.621068,-7.5E-02)); +#474022 = VECTOR('',#474023,1.); +#474023 = DIRECTION('',(0.902779519658,0.430103637377,0.)); +#474024 = ORIENTED_EDGE('',*,*,#474025,.T.); +#474025 = EDGE_CURVE('',#474018,#474026,#474028,.T.); +#474026 = VERTEX_POINT('',#474027); +#474027 = CARTESIAN_POINT('',(153.932017,-126.568658,-7.5E-02)); +#474028 = LINE('',#474029,#474030); +#474029 = CARTESIAN_POINT('',(153.537336,-126.570412,-7.5E-02)); +#474030 = VECTOR('',#474031,1.); +#474031 = DIRECTION('',(0.999990125154,4.444051473282E-03,0.)); +#474032 = ORIENTED_EDGE('',*,*,#474033,.T.); +#474033 = EDGE_CURVE('',#474026,#474034,#474036,.T.); +#474034 = VERTEX_POINT('',#474035); +#474035 = CARTESIAN_POINT('',(153.951921,-126.573449,-7.5E-02)); +#474036 = LINE('',#474037,#474038); +#474037 = CARTESIAN_POINT('',(153.932017,-126.568658,-7.5E-02)); +#474038 = VECTOR('',#474039,1.); +#474039 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#474040 = ORIENTED_EDGE('',*,*,#474041,.T.); +#474041 = EDGE_CURVE('',#474034,#474042,#474044,.T.); +#474042 = VERTEX_POINT('',#474043); +#474043 = CARTESIAN_POINT('',(154.059751,-126.630839,-7.5E-02)); +#474044 = LINE('',#474045,#474046); +#474045 = CARTESIAN_POINT('',(153.951921,-126.573449,-7.5E-02)); +#474046 = VECTOR('',#474047,1.); +#474047 = DIRECTION('',(0.882758259516,-0.469827473927,0.)); +#474048 = ORIENTED_EDGE('',*,*,#474049,.T.); +#474049 = EDGE_CURVE('',#474042,#474050,#474052,.T.); +#474050 = VERTEX_POINT('',#474051); +#474051 = CARTESIAN_POINT('',(154.118613,-126.741893,-7.5E-02)); +#474052 = LINE('',#474053,#474054); +#474053 = CARTESIAN_POINT('',(154.059751,-126.630839,-7.5E-02)); +#474054 = VECTOR('',#474055,1.); +#474055 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#474056 = ORIENTED_EDGE('',*,*,#474057,.T.); +#474057 = EDGE_CURVE('',#474050,#474058,#474060,.T.); +#474058 = VERTEX_POINT('',#474059); +#474059 = CARTESIAN_POINT('',(154.122419,-126.761027,-7.5E-02)); +#474060 = LINE('',#474061,#474062); +#474061 = CARTESIAN_POINT('',(154.118613,-126.741893,-7.5E-02)); +#474062 = VECTOR('',#474063,1.); +#474063 = DIRECTION('',(0.195090852695,-0.980785174845,0.)); +#474064 = ORIENTED_EDGE('',*,*,#474065,.T.); +#474065 = EDGE_CURVE('',#474058,#474066,#474068,.T.); +#474066 = VERTEX_POINT('',#474067); +#474067 = CARTESIAN_POINT('',(154.120176,-126.962775,-7.5E-02)); +#474068 = LINE('',#474069,#474070); +#474069 = CARTESIAN_POINT('',(154.122419,-126.761027,-7.5E-02)); +#474070 = VECTOR('',#474071,1.); +#474071 = DIRECTION('',(-1.111714311208E-02,-0.999938202655,0.)); +#474072 = ORIENTED_EDGE('',*,*,#474073,.T.); +#474073 = EDGE_CURVE('',#474066,#474074,#474076,.T.); +#474074 = VERTEX_POINT('',#474075); +#474075 = CARTESIAN_POINT('',(154.069521,-127.069102,-7.5E-02)); +#474076 = LINE('',#474077,#474078); +#474077 = CARTESIAN_POINT('',(154.120176,-126.962775,-7.5E-02)); +#474078 = VECTOR('',#474079,1.); +#474079 = DIRECTION('',(-0.430093420565,-0.902784387097,0.)); +#474080 = ORIENTED_EDGE('',*,*,#474081,.T.); +#474081 = EDGE_CURVE('',#474074,#474082,#474084,.T.); +#474082 = VERTEX_POINT('',#474083); +#474083 = CARTESIAN_POINT('',(153.980079,-127.02438,-7.5E-02)); +#474084 = CIRCLE('',#474085,4.999982161969E-02); +#474085 = AXIS2_PLACEMENT_3D('',#474086,#474087,#474088); +#474086 = CARTESIAN_POINT('',(154.02479999642,-127.0467410071,-7.5E-02) + ); +#474087 = DIRECTION('',(-0.,0.,-1.)); +#474088 = DIRECTION('',(0.894423262496,-0.447221452422,-0.)); +#474089 = ORIENTED_EDGE('',*,*,#474090,.T.); +#474090 = EDGE_CURVE('',#474082,#474091,#474093,.T.); +#474091 = VERTEX_POINT('',#474092); +#474092 = CARTESIAN_POINT('',(154.022419,-126.939699,-7.5E-02)); +#474093 = LINE('',#474094,#474095); +#474094 = CARTESIAN_POINT('',(153.980079,-127.02438,-7.5E-02)); +#474095 = VECTOR('',#474096,1.); +#474096 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#474097 = ORIENTED_EDGE('',*,*,#474098,.T.); +#474098 = EDGE_CURVE('',#474091,#474099,#474101,.T.); +#474099 = VERTEX_POINT('',#474100); +#474100 = CARTESIAN_POINT('',(154.022419,-126.77283,-7.5E-02)); +#474101 = LINE('',#474102,#474103); +#474102 = CARTESIAN_POINT('',(154.022419,-126.939699,-7.5E-02)); +#474103 = VECTOR('',#474104,1.); +#474104 = DIRECTION('',(0.,1.,0.)); +#474105 = ORIENTED_EDGE('',*,*,#474106,.T.); +#474106 = EDGE_CURVE('',#474099,#474107,#474109,.T.); +#474107 = VERTEX_POINT('',#474108); +#474108 = CARTESIAN_POINT('',(153.987532,-126.703056,-7.5E-02)); +#474109 = LINE('',#474110,#474111); +#474110 = CARTESIAN_POINT('',(154.022419,-126.77283,-7.5E-02)); +#474111 = VECTOR('',#474112,1.); +#474112 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#474113 = ORIENTED_EDGE('',*,*,#474114,.T.); +#474114 = EDGE_CURVE('',#474107,#474115,#474117,.T.); +#474115 = VERTEX_POINT('',#474116); +#474116 = CARTESIAN_POINT('',(153.917759,-126.66817,-7.5E-02)); +#474117 = LINE('',#474118,#474119); +#474118 = CARTESIAN_POINT('',(153.987532,-126.703056,-7.5E-02)); +#474119 = VECTOR('',#474120,1.); +#474120 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#474121 = ORIENTED_EDGE('',*,*,#474122,.T.); +#474122 = EDGE_CURVE('',#474115,#474123,#474125,.T.); +#474123 = VERTEX_POINT('',#474124); +#474124 = CARTESIAN_POINT('',(153.780075,-126.66817,-7.5E-02)); +#474125 = LINE('',#474126,#474127); +#474126 = CARTESIAN_POINT('',(153.917759,-126.66817,-7.5E-02)); +#474127 = VECTOR('',#474128,1.); +#474128 = DIRECTION('',(-1.,0.,0.)); +#474129 = ORIENTED_EDGE('',*,*,#474130,.T.); +#474130 = EDGE_CURVE('',#474123,#474131,#474133,.T.); +#474131 = VERTEX_POINT('',#474132); +#474132 = CARTESIAN_POINT('',(153.688261,-127.115273,-7.5E-02)); +#474133 = LINE('',#474134,#474135); +#474134 = CARTESIAN_POINT('',(153.780075,-126.66817,-7.5E-02)); +#474135 = VECTOR('',#474136,1.); +#474136 = DIRECTION('',(-0.201155568784,-0.979559307621,0.)); +#474137 = ORIENTED_EDGE('',*,*,#474138,.T.); +#474138 = EDGE_CURVE('',#474131,#474139,#474141,.T.); +#474139 = VERTEX_POINT('',#474140); +#474140 = CARTESIAN_POINT('',(153.662981,-127.140554,-7.5E-02)); +#474141 = LINE('',#474142,#474143); +#474142 = CARTESIAN_POINT('',(153.688261,-127.115273,-7.5E-02)); +#474143 = VECTOR('',#474144,1.); +#474144 = DIRECTION('',(-0.707092795827,-0.707120766269,0.)); +#474145 = ORIENTED_EDGE('',*,*,#474146,.T.); +#474146 = EDGE_CURVE('',#474139,#474147,#474149,.T.); +#474147 = VERTEX_POINT('',#474148); +#474148 = CARTESIAN_POINT('',(153.643847,-127.14436,-7.5E-02)); +#474149 = LINE('',#474150,#474151); +#474150 = CARTESIAN_POINT('',(153.662981,-127.140554,-7.5E-02)); +#474151 = VECTOR('',#474152,1.); +#474152 = DIRECTION('',(-0.980785174844,-0.195090852695,0.)); +#474153 = ORIENTED_EDGE('',*,*,#474154,.T.); +#474154 = EDGE_CURVE('',#474147,#474155,#474157,.T.); +#474155 = VERTEX_POINT('',#474156); +#474156 = CARTESIAN_POINT('',(153.537336,-127.142117,-7.5E-02)); +#474157 = LINE('',#474158,#474159); +#474158 = CARTESIAN_POINT('',(153.643847,-127.14436,-7.5E-02)); +#474159 = VECTOR('',#474160,1.); +#474160 = DIRECTION('',(-0.999778335979,2.105418977954E-02,0.)); +#474161 = ORIENTED_EDGE('',*,*,#474162,.T.); +#474162 = EDGE_CURVE('',#474155,#474163,#474165,.T.); +#474163 = VERTEX_POINT('',#474164); +#474164 = CARTESIAN_POINT('',(153.420611,-127.084513,-7.5E-02)); +#474165 = LINE('',#474166,#474167); +#474166 = CARTESIAN_POINT('',(153.537336,-127.142117,-7.5E-02)); +#474167 = VECTOR('',#474168,1.); +#474168 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#474169 = ORIENTED_EDGE('',*,*,#474170,.T.); +#474170 = EDGE_CURVE('',#474163,#474171,#474173,.T.); +#474171 = VERTEX_POINT('',#474172); +#474172 = CARTESIAN_POINT('',(153.408649,-127.069101,-7.5E-02)); +#474173 = LINE('',#474174,#474175); +#474174 = CARTESIAN_POINT('',(153.420611,-127.084513,-7.5E-02)); +#474175 = VECTOR('',#474176,1.); +#474176 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#474177 = ORIENTED_EDGE('',*,*,#474178,.T.); +#474178 = EDGE_CURVE('',#474171,#474179,#474181,.T.); +#474179 = VERTEX_POINT('',#474180); +#474180 = CARTESIAN_POINT('',(153.415598,-126.633029,-7.5E-02)); +#474181 = CIRCLE('',#474182,0.376597301495); +#474182 = AXIS2_PLACEMENT_3D('',#474183,#474184,#474185); +#474183 = CARTESIAN_POINT('',(153.71912484267,-126.855957202,-7.5E-02)); +#474184 = DIRECTION('',(0.,0.,-1.)); +#474185 = DIRECTION('',(-0.824423970765,-0.565972717035,-0.)); +#474186 = ORIENTED_EDGE('',*,*,#474187,.T.); +#474187 = EDGE_CURVE('',#474179,#474016,#474188,.T.); +#474188 = LINE('',#474189,#474190); +#474189 = CARTESIAN_POINT('',(153.415598,-126.633029,-7.5E-02)); +#474190 = VECTOR('',#474191,1.); +#474191 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#474192 = FACE_BOUND('',#474193,.T.); +#474193 = EDGE_LOOP('',(#474194,#474204,#474212,#474220,#474229,#474237) + ); +#474194 = ORIENTED_EDGE('',*,*,#474195,.T.); +#474195 = EDGE_CURVE('',#474196,#474198,#474200,.T.); +#474196 = VERTEX_POINT('',#474197); +#474197 = CARTESIAN_POINT('',(153.602857,-127.04436,-7.5E-02)); +#474198 = VERTEX_POINT('',#474199); +#474199 = CARTESIAN_POINT('',(153.678095,-126.66817,-7.5E-02)); +#474200 = LINE('',#474201,#474202); +#474201 = CARTESIAN_POINT('',(153.602857,-127.04436,-7.5E-02)); +#474202 = VECTOR('',#474203,1.); +#474203 = DIRECTION('',(0.196116135138,0.980580675691,0.)); +#474204 = ORIENTED_EDGE('',*,*,#474205,.T.); +#474205 = EDGE_CURVE('',#474198,#474206,#474208,.T.); +#474206 = VERTEX_POINT('',#474207); +#474207 = CARTESIAN_POINT('',(153.560413,-126.66817,-7.5E-02)); +#474208 = LINE('',#474209,#474210); +#474209 = CARTESIAN_POINT('',(153.678095,-126.66817,-7.5E-02)); +#474210 = VECTOR('',#474211,1.); +#474211 = DIRECTION('',(-1.,0.,0.)); +#474212 = ORIENTED_EDGE('',*,*,#474213,.T.); +#474213 = EDGE_CURVE('',#474206,#474214,#474216,.T.); +#474214 = VERTEX_POINT('',#474215); +#474215 = CARTESIAN_POINT('',(153.490638,-126.703056,-7.5E-02)); +#474216 = LINE('',#474217,#474218); +#474217 = CARTESIAN_POINT('',(153.560413,-126.66817,-7.5E-02)); +#474218 = VECTOR('',#474219,1.); +#474219 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#474220 = ORIENTED_EDGE('',*,*,#474221,.T.); +#474221 = EDGE_CURVE('',#474214,#474222,#474224,.T.); +#474222 = VERTEX_POINT('',#474223); +#474223 = CARTESIAN_POINT('',(153.490638,-127.009473,-7.5E-02)); +#474224 = CIRCLE('',#474225,0.26744056971); +#474225 = AXIS2_PLACEMENT_3D('',#474226,#474227,#474228); +#474226 = CARTESIAN_POINT('',(153.70984478332,-126.8562645,-7.5E-02)); +#474227 = DIRECTION('',(0.,0.,1.)); +#474228 = DIRECTION('',(-0.819646710894,0.572869330057,0.)); +#474229 = ORIENTED_EDGE('',*,*,#474230,.T.); +#474230 = EDGE_CURVE('',#474222,#474231,#474233,.T.); +#474231 = VERTEX_POINT('',#474232); +#474232 = CARTESIAN_POINT('',(153.560413,-127.04436,-7.5E-02)); +#474233 = LINE('',#474234,#474235); +#474234 = CARTESIAN_POINT('',(153.490638,-127.009473,-7.5E-02)); +#474235 = VECTOR('',#474236,1.); +#474236 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#474237 = ORIENTED_EDGE('',*,*,#474238,.T.); +#474238 = EDGE_CURVE('',#474231,#474196,#474239,.T.); +#474239 = LINE('',#474240,#474241); +#474240 = CARTESIAN_POINT('',(153.560413,-127.04436,-7.5E-02)); +#474241 = VECTOR('',#474242,1.); +#474242 = DIRECTION('',(1.,0.,0.)); +#474243 = PLANE('',#474244); +#474244 = AXIS2_PLACEMENT_3D('',#474245,#474246,#474247); +#474245 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474246 = DIRECTION('',(-0.,-0.,-1.)); +#474247 = DIRECTION('',(-1.,0.,0.)); +#474248 = SHELL_BASED_SURFACE_MODEL('',(#474249)); +#474249 = OPEN_SHELL('',(#474250)); +#474250 = ADVANCED_FACE('',(#474251),#474295,.T.); +#474251 = FACE_BOUND('',#474252,.T.); +#474252 = EDGE_LOOP('',(#474253,#474264,#474272,#474281,#474289)); +#474253 = ORIENTED_EDGE('',*,*,#474254,.T.); +#474254 = EDGE_CURVE('',#474255,#474257,#474259,.T.); +#474255 = VERTEX_POINT('',#474256); +#474256 = CARTESIAN_POINT('',(145.972067,-125.487039,-7.5E-02)); +#474257 = VERTEX_POINT('',#474258); +#474258 = CARTESIAN_POINT('',(146.0875,-125.51,-7.5E-02)); +#474259 = CIRCLE('',#474260,6.000007318647E-02); +#474260 = AXIS2_PLACEMENT_3D('',#474261,#474262,#474263); +#474261 = CARTESIAN_POINT('',(146.02749992681,-125.5099998233,-7.5E-02) + ); +#474262 = DIRECTION('',(0.,0.,-1.)); +#474263 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#474264 = ORIENTED_EDGE('',*,*,#474265,.T.); +#474265 = EDGE_CURVE('',#474257,#474266,#474268,.T.); +#474266 = VERTEX_POINT('',#474267); +#474267 = CARTESIAN_POINT('',(146.0875,-126.29,-7.5E-02)); +#474268 = LINE('',#474269,#474270); +#474269 = CARTESIAN_POINT('',(146.0875,-125.51,-7.5E-02)); +#474270 = VECTOR('',#474271,1.); +#474271 = DIRECTION('',(0.,-1.,0.)); +#474272 = ORIENTED_EDGE('',*,*,#474273,.T.); +#474273 = EDGE_CURVE('',#474266,#474274,#474276,.T.); +#474274 = VERTEX_POINT('',#474275); +#474275 = CARTESIAN_POINT('',(145.9675,-126.29,-7.5E-02)); +#474276 = CIRCLE('',#474277,6.000000000043E-02); +#474277 = AXIS2_PLACEMENT_3D('',#474278,#474279,#474280); +#474278 = CARTESIAN_POINT('',(146.0275,-126.2900002255,-7.5E-02)); +#474279 = DIRECTION('',(0.,0.,-1.)); +#474280 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#474281 = ORIENTED_EDGE('',*,*,#474282,.T.); +#474282 = EDGE_CURVE('',#474274,#474283,#474285,.T.); +#474283 = VERTEX_POINT('',#474284); +#474284 = CARTESIAN_POINT('',(145.9675,-125.51,-7.5E-02)); +#474285 = LINE('',#474286,#474287); +#474286 = CARTESIAN_POINT('',(145.9675,-126.29,-7.5E-02)); +#474287 = VECTOR('',#474288,1.); +#474288 = DIRECTION('',(0.,1.,0.)); +#474289 = ORIENTED_EDGE('',*,*,#474290,.T.); +#474290 = EDGE_CURVE('',#474283,#474255,#474291,.T.); +#474291 = LINE('',#474292,#474293); +#474292 = CARTESIAN_POINT('',(145.9675,-125.51,-7.5E-02)); +#474293 = VECTOR('',#474294,1.); +#474294 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#474295 = PLANE('',#474296); +#474296 = AXIS2_PLACEMENT_3D('',#474297,#474298,#474299); +#474297 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474298 = DIRECTION('',(-0.,-0.,-1.)); +#474299 = DIRECTION('',(-1.,0.,0.)); +#474300 = SHELL_BASED_SURFACE_MODEL('',(#474301)); +#474301 = OPEN_SHELL('',(#474302)); +#474302 = ADVANCED_FACE('',(#474303),#474363,.T.); +#474303 = FACE_BOUND('',#474304,.T.); +#474304 = EDGE_LOOP('',(#474305,#474316,#474324,#474333,#474341,#474349, + #474357)); +#474305 = ORIENTED_EDGE('',*,*,#474306,.T.); +#474306 = EDGE_CURVE('',#474307,#474309,#474311,.T.); +#474307 = VERTEX_POINT('',#474308); +#474308 = CARTESIAN_POINT('',(145.198976,-125.98529,-7.5E-02)); +#474309 = VERTEX_POINT('',#474310); +#474310 = CARTESIAN_POINT('',(145.2475,-125.89,-7.5E-02)); +#474311 = CIRCLE('',#474312,5.999941814204E-02); +#474312 = AXIS2_PLACEMENT_3D('',#474313,#474314,#474315); +#474313 = CARTESIAN_POINT('',(145.24749924194,-125.9499994181,-7.5E-02) + ); +#474314 = DIRECTION('',(0.,0.,-1.)); +#474315 = DIRECTION('',(-0.80872854189,-0.588182068353,-0.)); +#474316 = ORIENTED_EDGE('',*,*,#474317,.T.); +#474317 = EDGE_CURVE('',#474309,#474318,#474320,.T.); +#474318 = VERTEX_POINT('',#474319); +#474319 = CARTESIAN_POINT('',(145.7275,-125.89,-7.5E-02)); +#474320 = LINE('',#474321,#474322); +#474321 = CARTESIAN_POINT('',(145.2475,-125.89,-7.5E-02)); +#474322 = VECTOR('',#474323,1.); +#474323 = DIRECTION('',(1.,0.,0.)); +#474324 = ORIENTED_EDGE('',*,*,#474325,.T.); +#474325 = EDGE_CURVE('',#474318,#474326,#474328,.T.); +#474326 = VERTEX_POINT('',#474327); +#474327 = CARTESIAN_POINT('',(145.776024,-125.98529,-7.5E-02)); +#474328 = CIRCLE('',#474329,6.000027696173E-02); +#474329 = AXIS2_PLACEMENT_3D('',#474330,#474331,#474332); +#474330 = CARTESIAN_POINT('',(145.72749907153,-125.9500002769,-7.5E-02) + ); +#474331 = DIRECTION('',(0.,0.,-1.)); +#474332 = DIRECTION('',(1.547440111751E-05,0.99999999988,0.)); +#474333 = ORIENTED_EDGE('',*,*,#474334,.T.); +#474334 = EDGE_CURVE('',#474326,#474335,#474337,.T.); +#474335 = VERTEX_POINT('',#474336); +#474336 = CARTESIAN_POINT('',(145.536024,-126.31529,-7.5E-02)); +#474337 = LINE('',#474338,#474339); +#474338 = CARTESIAN_POINT('',(145.776024,-125.98529,-7.5E-02)); +#474339 = VECTOR('',#474340,1.); +#474340 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#474341 = ORIENTED_EDGE('',*,*,#474342,.T.); +#474342 = EDGE_CURVE('',#474335,#474343,#474345,.T.); +#474343 = VERTEX_POINT('',#474344); +#474344 = CARTESIAN_POINT('',(145.496858,-126.339266,-7.5E-02)); +#474345 = LINE('',#474346,#474347); +#474346 = CARTESIAN_POINT('',(145.536024,-126.31529,-7.5E-02)); +#474347 = VECTOR('',#474348,1.); +#474348 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#474349 = ORIENTED_EDGE('',*,*,#474350,.T.); +#474350 = EDGE_CURVE('',#474343,#474351,#474353,.T.); +#474351 = VERTEX_POINT('',#474352); +#474352 = CARTESIAN_POINT('',(145.45221,-126.328524,-7.5E-02)); +#474353 = LINE('',#474354,#474355); +#474354 = CARTESIAN_POINT('',(145.496858,-126.339266,-7.5E-02)); +#474355 = VECTOR('',#474356,1.); +#474356 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#474357 = ORIENTED_EDGE('',*,*,#474358,.T.); +#474358 = EDGE_CURVE('',#474351,#474307,#474359,.T.); +#474359 = LINE('',#474360,#474361); +#474360 = CARTESIAN_POINT('',(145.45221,-126.328524,-7.5E-02)); +#474361 = VECTOR('',#474362,1.); +#474362 = DIRECTION('',(-0.593692353744,0.804692108267,0.)); +#474363 = PLANE('',#474364); +#474364 = AXIS2_PLACEMENT_3D('',#474365,#474366,#474367); +#474365 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474366 = DIRECTION('',(-0.,-0.,-1.)); +#474367 = DIRECTION('',(-1.,0.,0.)); +#474368 = SHELL_BASED_SURFACE_MODEL('',(#474369)); +#474369 = OPEN_SHELL('',(#474370)); +#474370 = ADVANCED_FACE('',(#474371),#474447,.T.); +#474371 = FACE_BOUND('',#474372,.T.); +#474372 = EDGE_LOOP('',(#474373,#474384,#474392,#474400,#474408,#474416, + #474425,#474433,#474441)); +#474373 = ORIENTED_EDGE('',*,*,#474374,.T.); +#474374 = EDGE_CURVE('',#474375,#474377,#474379,.T.); +#474375 = VERTEX_POINT('',#474376); +#474376 = CARTESIAN_POINT('',(151.462475,-126.191981,-7.5E-02)); +#474377 = VERTEX_POINT('',#474378); +#474378 = CARTESIAN_POINT('',(151.462475,-126.091981,-7.5E-02)); +#474379 = CIRCLE('',#474380,5.000000000002E-02); +#474380 = AXIS2_PLACEMENT_3D('',#474381,#474382,#474383); +#474381 = CARTESIAN_POINT('',(151.46247504771,-126.141981,-7.5E-02)); +#474382 = DIRECTION('',(0.,0.,-1.)); +#474383 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#474384 = ORIENTED_EDGE('',*,*,#474385,.T.); +#474385 = EDGE_CURVE('',#474377,#474386,#474388,.T.); +#474386 = VERTEX_POINT('',#474387); +#474387 = CARTESIAN_POINT('',(152.322073,-126.092469,-7.5E-02)); +#474388 = LINE('',#474389,#474390); +#474389 = CARTESIAN_POINT('',(151.462475,-126.091981,-7.5E-02)); +#474390 = VECTOR('',#474391,1.); +#474391 = DIRECTION('',(0.999999838854,-5.67707139094E-04,0.)); +#474392 = ORIENTED_EDGE('',*,*,#474393,.T.); +#474393 = EDGE_CURVE('',#474386,#474394,#474396,.T.); +#474394 = VERTEX_POINT('',#474395); +#474395 = CARTESIAN_POINT('',(152.341977,-126.09726,-7.5E-02)); +#474396 = LINE('',#474397,#474398); +#474397 = CARTESIAN_POINT('',(152.322073,-126.092469,-7.5E-02)); +#474398 = VECTOR('',#474399,1.); +#474399 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#474400 = ORIENTED_EDGE('',*,*,#474401,.T.); +#474401 = EDGE_CURVE('',#474394,#474402,#474404,.T.); +#474402 = VERTEX_POINT('',#474403); +#474403 = CARTESIAN_POINT('',(152.449807,-126.15465,-7.5E-02)); +#474404 = LINE('',#474405,#474406); +#474405 = CARTESIAN_POINT('',(152.341977,-126.09726,-7.5E-02)); +#474406 = VECTOR('',#474407,1.); +#474407 = DIRECTION('',(0.882758259516,-0.469827473928,0.)); +#474408 = ORIENTED_EDGE('',*,*,#474409,.T.); +#474409 = EDGE_CURVE('',#474402,#474410,#474412,.T.); +#474410 = VERTEX_POINT('',#474411); +#474411 = CARTESIAN_POINT('',(152.507196,-126.262477,-7.5E-02)); +#474412 = LINE('',#474413,#474414); +#474413 = CARTESIAN_POINT('',(152.449807,-126.15465,-7.5E-02)); +#474414 = VECTOR('',#474415,1.); +#474415 = DIRECTION('',(0.469831280532,-0.882756233528,0.)); +#474416 = ORIENTED_EDGE('',*,*,#474417,.T.); +#474417 = EDGE_CURVE('',#474410,#474418,#474420,.T.); +#474418 = VERTEX_POINT('',#474419); +#474419 = CARTESIAN_POINT('',(152.417753,-126.307198,-7.5E-02)); +#474420 = CIRCLE('',#474421,5.000004522504E-02); +#474421 = AXIS2_PLACEMENT_3D('',#474422,#474423,#474424); +#474422 = CARTESIAN_POINT('',(152.46247453675,-126.2848375735,-7.5E-02) + ); +#474423 = DIRECTION('',(0.,0.,-1.)); +#474424 = DIRECTION('',(0.894428455807,0.447211065877,0.)); +#474425 = ORIENTED_EDGE('',*,*,#474426,.T.); +#474426 = EDGE_CURVE('',#474418,#474427,#474429,.T.); +#474427 = VERTEX_POINT('',#474428); +#474428 = CARTESIAN_POINT('',(152.377588,-126.226867,-7.5E-02)); +#474429 = LINE('',#474430,#474431); +#474430 = CARTESIAN_POINT('',(152.417753,-126.307198,-7.5E-02)); +#474431 = VECTOR('',#474432,1.); +#474432 = DIRECTION('',(-0.447209141775,0.894429417849,0.)); +#474433 = ORIENTED_EDGE('',*,*,#474434,.T.); +#474434 = EDGE_CURVE('',#474427,#474435,#474437,.T.); +#474435 = VERTEX_POINT('',#474436); +#474436 = CARTESIAN_POINT('',(152.307815,-126.191981,-7.5E-02)); +#474437 = LINE('',#474438,#474439); +#474438 = CARTESIAN_POINT('',(152.377588,-126.226867,-7.5E-02)); +#474439 = VECTOR('',#474440,1.); +#474440 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#474441 = ORIENTED_EDGE('',*,*,#474442,.T.); +#474442 = EDGE_CURVE('',#474435,#474375,#474443,.T.); +#474443 = LINE('',#474444,#474445); +#474444 = CARTESIAN_POINT('',(152.307815,-126.191981,-7.5E-02)); +#474445 = VECTOR('',#474446,1.); +#474446 = DIRECTION('',(-1.,0.,0.)); +#474447 = PLANE('',#474448); +#474448 = AXIS2_PLACEMENT_3D('',#474449,#474450,#474451); +#474449 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474450 = DIRECTION('',(-0.,-0.,-1.)); +#474451 = DIRECTION('',(-1.,0.,0.)); +#474452 = SHELL_BASED_SURFACE_MODEL('',(#474453)); +#474453 = OPEN_SHELL('',(#474454)); +#474454 = ADVANCED_FACE('',(#474455),#474604,.T.); +#474455 = FACE_BOUND('',#474456,.T.); +#474456 = EDGE_LOOP('',(#474457,#474468,#474476,#474485,#474493,#474501, + #474509,#474517,#474525,#474533,#474541,#474550,#474558,#474566, + #474574,#474582,#474590,#474598)); +#474457 = ORIENTED_EDGE('',*,*,#474458,.T.); +#474458 = EDGE_CURVE('',#474459,#474461,#474463,.T.); +#474459 = VERTEX_POINT('',#474460); +#474460 = CARTESIAN_POINT('',(153.072419,-125.811027,-7.5E-02)); +#474461 = VERTEX_POINT('',#474462); +#474462 = CARTESIAN_POINT('',(153.072419,-125.711027,-7.5E-02)); +#474463 = CIRCLE('',#474464,5.000000000002E-02); +#474464 = AXIS2_PLACEMENT_3D('',#474465,#474466,#474467); +#474465 = CARTESIAN_POINT('',(153.07241904771,-125.761027,-7.5E-02)); +#474466 = DIRECTION('',(0.,0.,-1.)); +#474467 = DIRECTION('',(-9.542367251921E-07,-1.,-0.)); +#474468 = ORIENTED_EDGE('',*,*,#474469,.T.); +#474469 = EDGE_CURVE('',#474461,#474470,#474472,.T.); +#474470 = VERTEX_POINT('',#474471); +#474471 = CARTESIAN_POINT('',(154.072419,-125.711027,-7.5E-02)); +#474472 = LINE('',#474473,#474474); +#474473 = CARTESIAN_POINT('',(153.072419,-125.711027,-7.5E-02)); +#474474 = VECTOR('',#474475,1.); +#474475 = DIRECTION('',(1.,0.,0.)); +#474476 = ORIENTED_EDGE('',*,*,#474477,.T.); +#474477 = EDGE_CURVE('',#474470,#474478,#474480,.T.); +#474478 = VERTEX_POINT('',#474479); +#474479 = CARTESIAN_POINT('',(154.072419,-125.811027,-7.5E-02)); +#474480 = CIRCLE('',#474481,5.000000000002E-02); +#474481 = AXIS2_PLACEMENT_3D('',#474482,#474483,#474484); +#474482 = CARTESIAN_POINT('',(154.07241895228,-125.761027,-7.5E-02)); +#474483 = DIRECTION('',(0.,0.,-1.)); +#474484 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#474485 = ORIENTED_EDGE('',*,*,#474486,.T.); +#474486 = EDGE_CURVE('',#474478,#474487,#474489,.T.); +#474487 = VERTEX_POINT('',#474488); +#474488 = CARTESIAN_POINT('',(153.521701,-125.811027,-7.5E-02)); +#474489 = LINE('',#474490,#474491); +#474490 = CARTESIAN_POINT('',(154.072419,-125.811027,-7.5E-02)); +#474491 = VECTOR('',#474492,1.); +#474492 = DIRECTION('',(-1.,0.,0.)); +#474493 = ORIENTED_EDGE('',*,*,#474494,.T.); +#474494 = EDGE_CURVE('',#474487,#474495,#474497,.T.); +#474495 = VERTEX_POINT('',#474496); +#474496 = CARTESIAN_POINT('',(153.494463,-125.838263,-7.5E-02)); +#474497 = LINE('',#474498,#474499); +#474498 = CARTESIAN_POINT('',(153.521701,-125.811027,-7.5E-02)); +#474499 = VECTOR('',#474500,1.); +#474500 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#474501 = ORIENTED_EDGE('',*,*,#474502,.T.); +#474502 = EDGE_CURVE('',#474495,#474503,#474505,.T.); +#474503 = VERTEX_POINT('',#474504); +#474504 = CARTESIAN_POINT('',(153.455752,-125.915687,-7.5E-02)); +#474505 = LINE('',#474506,#474507); +#474506 = CARTESIAN_POINT('',(153.494463,-125.838263,-7.5E-02)); +#474507 = VECTOR('',#474508,1.); +#474508 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#474509 = ORIENTED_EDGE('',*,*,#474510,.T.); +#474510 = EDGE_CURVE('',#474503,#474511,#474513,.T.); +#474511 = VERTEX_POINT('',#474512); +#474512 = CARTESIAN_POINT('',(153.455752,-126.034938,-7.5E-02)); +#474513 = LINE('',#474514,#474515); +#474514 = CARTESIAN_POINT('',(153.455752,-125.915687,-7.5E-02)); +#474515 = VECTOR('',#474516,1.); +#474516 = DIRECTION('',(0.,-1.,0.)); +#474517 = ORIENTED_EDGE('',*,*,#474518,.T.); +#474518 = EDGE_CURVE('',#474511,#474519,#474521,.T.); +#474519 = VERTEX_POINT('',#474520); +#474520 = CARTESIAN_POINT('',(153.490638,-126.104711,-7.5E-02)); +#474521 = LINE('',#474522,#474523); +#474522 = CARTESIAN_POINT('',(153.455752,-126.034938,-7.5E-02)); +#474523 = VECTOR('',#474524,1.); +#474524 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#474525 = ORIENTED_EDGE('',*,*,#474526,.T.); +#474526 = EDGE_CURVE('',#474519,#474527,#474529,.T.); +#474527 = VERTEX_POINT('',#474528); +#474528 = CARTESIAN_POINT('',(153.560413,-126.139598,-7.5E-02)); +#474529 = LINE('',#474530,#474531); +#474530 = CARTESIAN_POINT('',(153.490638,-126.104711,-7.5E-02)); +#474531 = VECTOR('',#474532,1.); +#474532 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#474533 = ORIENTED_EDGE('',*,*,#474534,.T.); +#474534 = EDGE_CURVE('',#474527,#474535,#474537,.T.); +#474535 = VERTEX_POINT('',#474536); +#474536 = CARTESIAN_POINT('',(154.072419,-126.139598,-7.5E-02)); +#474537 = LINE('',#474538,#474539); +#474538 = CARTESIAN_POINT('',(153.560413,-126.139598,-7.5E-02)); +#474539 = VECTOR('',#474540,1.); +#474540 = DIRECTION('',(1.,0.,0.)); +#474541 = ORIENTED_EDGE('',*,*,#474542,.T.); +#474542 = EDGE_CURVE('',#474535,#474543,#474545,.T.); +#474543 = VERTEX_POINT('',#474544); +#474544 = CARTESIAN_POINT('',(154.072419,-126.239598,-7.5E-02)); +#474545 = CIRCLE('',#474546,5.000000000002E-02); +#474546 = AXIS2_PLACEMENT_3D('',#474547,#474548,#474549); +#474547 = CARTESIAN_POINT('',(154.07241895228,-126.189598,-7.5E-02)); +#474548 = DIRECTION('',(0.,0.,-1.)); +#474549 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#474550 = ORIENTED_EDGE('',*,*,#474551,.T.); +#474551 = EDGE_CURVE('',#474543,#474552,#474554,.T.); +#474552 = VERTEX_POINT('',#474553); +#474553 = CARTESIAN_POINT('',(153.537336,-126.237355,-7.5E-02)); +#474554 = LINE('',#474555,#474556); +#474555 = CARTESIAN_POINT('',(154.072419,-126.239598,-7.5E-02)); +#474556 = VECTOR('',#474557,1.); +#474557 = DIRECTION('',(-0.999991214216,4.191836207642E-03,0.)); +#474558 = ORIENTED_EDGE('',*,*,#474559,.T.); +#474559 = EDGE_CURVE('',#474552,#474560,#474562,.T.); +#474560 = VERTEX_POINT('',#474561); +#474561 = CARTESIAN_POINT('',(153.420611,-126.179751,-7.5E-02)); +#474562 = LINE('',#474563,#474564); +#474563 = CARTESIAN_POINT('',(153.537336,-126.237355,-7.5E-02)); +#474564 = VECTOR('',#474565,1.); +#474565 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#474566 = ORIENTED_EDGE('',*,*,#474567,.T.); +#474567 = EDGE_CURVE('',#474560,#474568,#474570,.T.); +#474568 = VERTEX_POINT('',#474569); +#474569 = CARTESIAN_POINT('',(153.408649,-126.164339,-7.5E-02)); +#474570 = LINE('',#474571,#474572); +#474571 = CARTESIAN_POINT('',(153.420611,-126.179751,-7.5E-02)); +#474572 = VECTOR('',#474573,1.); +#474573 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#474574 = ORIENTED_EDGE('',*,*,#474575,.T.); +#474575 = EDGE_CURVE('',#474568,#474576,#474578,.T.); +#474576 = VERTEX_POINT('',#474577); +#474577 = CARTESIAN_POINT('',(153.357994,-126.058013,-7.5E-02)); +#474578 = LINE('',#474579,#474580); +#474579 = CARTESIAN_POINT('',(153.408649,-126.164339,-7.5E-02)); +#474580 = VECTOR('',#474581,1.); +#474581 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#474582 = ORIENTED_EDGE('',*,*,#474583,.T.); +#474583 = EDGE_CURVE('',#474576,#474584,#474586,.T.); +#474584 = VERTEX_POINT('',#474585); +#474585 = CARTESIAN_POINT('',(153.357994,-125.892611,-7.5E-02)); +#474586 = LINE('',#474587,#474588); +#474587 = CARTESIAN_POINT('',(153.357994,-126.058013,-7.5E-02)); +#474588 = VECTOR('',#474589,1.); +#474589 = DIRECTION('',(0.,1.,0.)); +#474590 = ORIENTED_EDGE('',*,*,#474591,.T.); +#474591 = EDGE_CURVE('',#474584,#474592,#474594,.T.); +#474592 = VERTEX_POINT('',#474593); +#474593 = CARTESIAN_POINT('',(153.396279,-125.811027,-7.5E-02)); +#474594 = LINE('',#474595,#474596); +#474595 = CARTESIAN_POINT('',(153.357994,-125.892611,-7.5E-02)); +#474596 = VECTOR('',#474597,1.); +#474597 = DIRECTION('',(0.42482047438,0.90527761739,0.)); +#474598 = ORIENTED_EDGE('',*,*,#474599,.T.); +#474599 = EDGE_CURVE('',#474592,#474459,#474600,.T.); +#474600 = LINE('',#474601,#474602); +#474601 = CARTESIAN_POINT('',(153.396279,-125.811027,-7.5E-02)); +#474602 = VECTOR('',#474603,1.); +#474603 = DIRECTION('',(-1.,0.,0.)); +#474604 = PLANE('',#474605); +#474605 = AXIS2_PLACEMENT_3D('',#474606,#474607,#474608); +#474606 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474607 = DIRECTION('',(-0.,-0.,-1.)); +#474608 = DIRECTION('',(-1.,0.,0.)); +#474609 = SHELL_BASED_SURFACE_MODEL('',(#474610)); +#474610 = OPEN_SHELL('',(#474611)); +#474611 = ADVANCED_FACE('',(#474612),#474688,.T.); +#474612 = FACE_BOUND('',#474613,.T.); +#474613 = EDGE_LOOP('',(#474614,#474625,#474633,#474641,#474649,#474657, + #474666,#474674,#474682)); +#474614 = ORIENTED_EDGE('',*,*,#474615,.T.); +#474615 = EDGE_CURVE('',#474616,#474618,#474620,.T.); +#474616 = VERTEX_POINT('',#474617); +#474617 = CARTESIAN_POINT('',(151.462475,-125.668171,-7.5E-02)); +#474618 = VERTEX_POINT('',#474619); +#474619 = CARTESIAN_POINT('',(151.462475,-125.568171,-7.5E-02)); +#474620 = CIRCLE('',#474621,5.000000000002E-02); +#474621 = AXIS2_PLACEMENT_3D('',#474622,#474623,#474624); +#474622 = CARTESIAN_POINT('',(151.46247504771,-125.618171,-7.5E-02)); +#474623 = DIRECTION('',(0.,0.,-1.)); +#474624 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#474625 = ORIENTED_EDGE('',*,*,#474626,.T.); +#474626 = EDGE_CURVE('',#474618,#474627,#474629,.T.); +#474627 = VERTEX_POINT('',#474628); +#474628 = CARTESIAN_POINT('',(152.322073,-125.568659,-7.5E-02)); +#474629 = LINE('',#474630,#474631); +#474630 = CARTESIAN_POINT('',(151.462475,-125.568171,-7.5E-02)); +#474631 = VECTOR('',#474632,1.); +#474632 = DIRECTION('',(0.999999838854,-5.67707139094E-04,0.)); +#474633 = ORIENTED_EDGE('',*,*,#474634,.T.); +#474634 = EDGE_CURVE('',#474627,#474635,#474637,.T.); +#474635 = VERTEX_POINT('',#474636); +#474636 = CARTESIAN_POINT('',(152.341977,-125.57345,-7.5E-02)); +#474637 = LINE('',#474638,#474639); +#474638 = CARTESIAN_POINT('',(152.322073,-125.568659,-7.5E-02)); +#474639 = VECTOR('',#474640,1.); +#474640 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#474641 = ORIENTED_EDGE('',*,*,#474642,.T.); +#474642 = EDGE_CURVE('',#474635,#474643,#474645,.T.); +#474643 = VERTEX_POINT('',#474644); +#474644 = CARTESIAN_POINT('',(152.449807,-125.63084,-7.5E-02)); +#474645 = LINE('',#474646,#474647); +#474646 = CARTESIAN_POINT('',(152.341977,-125.57345,-7.5E-02)); +#474647 = VECTOR('',#474648,1.); +#474648 = DIRECTION('',(0.882758259515,-0.469827473928,0.)); +#474649 = ORIENTED_EDGE('',*,*,#474650,.T.); +#474650 = EDGE_CURVE('',#474643,#474651,#474653,.T.); +#474651 = VERTEX_POINT('',#474652); +#474652 = CARTESIAN_POINT('',(152.507196,-125.738667,-7.5E-02)); +#474653 = LINE('',#474654,#474655); +#474654 = CARTESIAN_POINT('',(152.449807,-125.63084,-7.5E-02)); +#474655 = VECTOR('',#474656,1.); +#474656 = DIRECTION('',(0.469831280532,-0.882756233528,0.)); +#474657 = ORIENTED_EDGE('',*,*,#474658,.T.); +#474658 = EDGE_CURVE('',#474651,#474659,#474661,.T.); +#474659 = VERTEX_POINT('',#474660); +#474660 = CARTESIAN_POINT('',(152.417753,-125.783388,-7.5E-02)); +#474661 = CIRCLE('',#474662,5.000004522504E-02); +#474662 = AXIS2_PLACEMENT_3D('',#474663,#474664,#474665); +#474663 = CARTESIAN_POINT('',(152.46247453675,-125.7610275735,-7.5E-02) + ); +#474664 = DIRECTION('',(0.,0.,-1.)); +#474665 = DIRECTION('',(0.894428455807,0.447211065877,0.)); +#474666 = ORIENTED_EDGE('',*,*,#474667,.T.); +#474667 = EDGE_CURVE('',#474659,#474668,#474670,.T.); +#474668 = VERTEX_POINT('',#474669); +#474669 = CARTESIAN_POINT('',(152.377588,-125.703057,-7.5E-02)); +#474670 = LINE('',#474671,#474672); +#474671 = CARTESIAN_POINT('',(152.417753,-125.783388,-7.5E-02)); +#474672 = VECTOR('',#474673,1.); +#474673 = DIRECTION('',(-0.447209141775,0.894429417849,0.)); +#474674 = ORIENTED_EDGE('',*,*,#474675,.T.); +#474675 = EDGE_CURVE('',#474668,#474676,#474678,.T.); +#474676 = VERTEX_POINT('',#474677); +#474677 = CARTESIAN_POINT('',(152.307815,-125.668171,-7.5E-02)); +#474678 = LINE('',#474679,#474680); +#474679 = CARTESIAN_POINT('',(152.377588,-125.703057,-7.5E-02)); +#474680 = VECTOR('',#474681,1.); +#474681 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#474682 = ORIENTED_EDGE('',*,*,#474683,.T.); +#474683 = EDGE_CURVE('',#474676,#474616,#474684,.T.); +#474684 = LINE('',#474685,#474686); +#474685 = CARTESIAN_POINT('',(152.307815,-125.668171,-7.5E-02)); +#474686 = VECTOR('',#474687,1.); +#474687 = DIRECTION('',(-1.,0.,0.)); +#474688 = PLANE('',#474689); +#474689 = AXIS2_PLACEMENT_3D('',#474690,#474691,#474692); +#474690 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474691 = DIRECTION('',(-0.,-0.,-1.)); +#474692 = DIRECTION('',(-1.,0.,0.)); +#474693 = SHELL_BASED_SURFACE_MODEL('',(#474694)); +#474694 = OPEN_SHELL('',(#474695)); +#474695 = ADVANCED_FACE('',(#474696),#474862,.T.); +#474696 = FACE_BOUND('',#474697,.T.); +#474697 = EDGE_LOOP('',(#474698,#474709,#474717,#474725,#474733,#474741, + #474749,#474757,#474766,#474774,#474782,#474790,#474798,#474806, + #474815,#474823,#474831,#474840,#474848,#474856)); +#474698 = ORIENTED_EDGE('',*,*,#474699,.T.); +#474699 = EDGE_CURVE('',#474700,#474702,#474704,.T.); +#474700 = VERTEX_POINT('',#474701); +#474701 = CARTESIAN_POINT('',(153.359558,-125.027607,-7.5E-02)); +#474702 = VERTEX_POINT('',#474703); +#474703 = CARTESIAN_POINT('',(153.455752,-125.046741,-7.5E-02)); +#474704 = CIRCLE('',#474705,4.999998452108E-02); +#474705 = AXIS2_PLACEMENT_3D('',#474706,#474707,#474708); +#474706 = CARTESIAN_POINT('',(153.40575201547,-125.0467410373,-7.5E-02) + ); +#474707 = DIRECTION('',(0.,0.,-1.)); +#474708 = DIRECTION('',(-0.923880595592,0.382680865851,0.)); +#474709 = ORIENTED_EDGE('',*,*,#474710,.T.); +#474710 = EDGE_CURVE('',#474702,#474711,#474713,.T.); +#474711 = VERTEX_POINT('',#474712); +#474712 = CARTESIAN_POINT('',(153.455752,-125.139598,-7.5E-02)); +#474713 = LINE('',#474714,#474715); +#474714 = CARTESIAN_POINT('',(153.455752,-125.046741,-7.5E-02)); +#474715 = VECTOR('',#474716,1.); +#474716 = DIRECTION('',(0.,-1.,0.)); +#474717 = ORIENTED_EDGE('',*,*,#474718,.T.); +#474718 = EDGE_CURVE('',#474711,#474719,#474721,.T.); +#474719 = VERTEX_POINT('',#474720); +#474720 = CARTESIAN_POINT('',(153.940829,-125.141839,-7.5E-02)); +#474721 = LINE('',#474722,#474723); +#474722 = CARTESIAN_POINT('',(153.455752,-125.139598,-7.5E-02)); +#474723 = VECTOR('',#474724,1.); +#474724 = DIRECTION('',(0.999989328502,-4.619835789308E-03,0.)); +#474725 = ORIENTED_EDGE('',*,*,#474726,.T.); +#474726 = EDGE_CURVE('',#474719,#474727,#474729,.T.); +#474727 = VERTEX_POINT('',#474728); +#474728 = CARTESIAN_POINT('',(154.05756,-125.199444,-7.5E-02)); +#474729 = LINE('',#474730,#474731); +#474730 = CARTESIAN_POINT('',(153.940829,-125.141839,-7.5E-02)); +#474731 = VECTOR('',#474732,1.); +#474732 = DIRECTION('',(0.896751907126,-0.442533633825,0.)); +#474733 = ORIENTED_EDGE('',*,*,#474734,.T.); +#474734 = EDGE_CURVE('',#474727,#474735,#474737,.T.); +#474735 = VERTEX_POINT('',#474736); +#474736 = CARTESIAN_POINT('',(154.069521,-125.214856,-7.5E-02)); +#474737 = LINE('',#474738,#474739); +#474738 = CARTESIAN_POINT('',(154.05756,-125.199444,-7.5E-02)); +#474739 = VECTOR('',#474740,1.); +#474740 = DIRECTION('',(0.61310632988,-0.790000397634,0.)); +#474741 = ORIENTED_EDGE('',*,*,#474742,.T.); +#474742 = EDGE_CURVE('',#474735,#474743,#474745,.T.); +#474743 = VERTEX_POINT('',#474744); +#474744 = CARTESIAN_POINT('',(154.120176,-125.321182,-7.5E-02)); +#474745 = LINE('',#474746,#474747); +#474746 = CARTESIAN_POINT('',(154.069521,-125.214856,-7.5E-02)); +#474747 = VECTOR('',#474748,1.); +#474748 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#474749 = ORIENTED_EDGE('',*,*,#474750,.T.); +#474750 = EDGE_CURVE('',#474743,#474751,#474753,.T.); +#474751 = VERTEX_POINT('',#474752); +#474752 = CARTESIAN_POINT('',(154.122419,-125.427693,-7.5E-02)); +#474753 = LINE('',#474754,#474755); +#474754 = CARTESIAN_POINT('',(154.120176,-125.321182,-7.5E-02)); +#474755 = VECTOR('',#474756,1.); +#474756 = DIRECTION('',(2.105418977966E-02,-0.999778335979,0.)); +#474757 = ORIENTED_EDGE('',*,*,#474758,.T.); +#474758 = EDGE_CURVE('',#474751,#474759,#474761,.T.); +#474759 = VERTEX_POINT('',#474760); +#474760 = CARTESIAN_POINT('',(154.022419,-125.427693,-7.5E-02)); +#474761 = CIRCLE('',#474762,5.000000000002E-02); +#474762 = AXIS2_PLACEMENT_3D('',#474763,#474764,#474765); +#474763 = CARTESIAN_POINT('',(154.072419,-125.4276929522,-7.5E-02)); +#474764 = DIRECTION('',(-0.,0.,-1.)); +#474765 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#474766 = ORIENTED_EDGE('',*,*,#474767,.T.); +#474767 = EDGE_CURVE('',#474759,#474768,#474770,.T.); +#474768 = VERTEX_POINT('',#474769); +#474769 = CARTESIAN_POINT('',(154.022419,-125.344258,-7.5E-02)); +#474770 = LINE('',#474771,#474772); +#474771 = CARTESIAN_POINT('',(154.022419,-125.427693,-7.5E-02)); +#474772 = VECTOR('',#474773,1.); +#474773 = DIRECTION('',(0.,1.,0.)); +#474774 = ORIENTED_EDGE('',*,*,#474775,.T.); +#474775 = EDGE_CURVE('',#474768,#474776,#474778,.T.); +#474776 = VERTEX_POINT('',#474777); +#474777 = CARTESIAN_POINT('',(153.987532,-125.274484,-7.5E-02)); +#474778 = LINE('',#474779,#474780); +#474779 = CARTESIAN_POINT('',(154.022419,-125.344258,-7.5E-02)); +#474780 = VECTOR('',#474781,1.); +#474781 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#474782 = ORIENTED_EDGE('',*,*,#474783,.T.); +#474783 = EDGE_CURVE('',#474776,#474784,#474786,.T.); +#474784 = VERTEX_POINT('',#474785); +#474785 = CARTESIAN_POINT('',(153.917759,-125.239598,-7.5E-02)); +#474786 = LINE('',#474787,#474788); +#474787 = CARTESIAN_POINT('',(153.987532,-125.274484,-7.5E-02)); +#474788 = VECTOR('',#474789,1.); +#474789 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#474790 = ORIENTED_EDGE('',*,*,#474791,.T.); +#474791 = EDGE_CURVE('',#474784,#474792,#474794,.T.); +#474792 = VERTEX_POINT('',#474793); +#474793 = CARTESIAN_POINT('',(153.455752,-125.239598,-7.5E-02)); +#474794 = LINE('',#474795,#474796); +#474795 = CARTESIAN_POINT('',(153.917759,-125.239598,-7.5E-02)); +#474796 = VECTOR('',#474797,1.); +#474797 = DIRECTION('',(-1.,0.,0.)); +#474798 = ORIENTED_EDGE('',*,*,#474799,.T.); +#474799 = EDGE_CURVE('',#474792,#474800,#474802,.T.); +#474800 = VERTEX_POINT('',#474801); +#474801 = CARTESIAN_POINT('',(153.455752,-125.427693,-7.5E-02)); +#474802 = LINE('',#474803,#474804); +#474803 = CARTESIAN_POINT('',(153.455752,-125.239598,-7.5E-02)); +#474804 = VECTOR('',#474805,1.); +#474805 = DIRECTION('',(0.,-1.,0.)); +#474806 = ORIENTED_EDGE('',*,*,#474807,.T.); +#474807 = EDGE_CURVE('',#474800,#474808,#474810,.T.); +#474808 = VERTEX_POINT('',#474809); +#474809 = CARTESIAN_POINT('',(153.355752,-125.427693,-7.5E-02)); +#474810 = CIRCLE('',#474811,5.000000000002E-02); +#474811 = AXIS2_PLACEMENT_3D('',#474812,#474813,#474814); +#474812 = CARTESIAN_POINT('',(153.405752,-125.4276929522,-7.5E-02)); +#474813 = DIRECTION('',(-0.,0.,-1.)); +#474814 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#474815 = ORIENTED_EDGE('',*,*,#474816,.T.); +#474816 = EDGE_CURVE('',#474808,#474817,#474819,.T.); +#474817 = VERTEX_POINT('',#474818); +#474818 = CARTESIAN_POINT('',(153.355752,-125.239598,-7.5E-02)); +#474819 = LINE('',#474820,#474821); +#474820 = CARTESIAN_POINT('',(153.355752,-125.427693,-7.5E-02)); +#474821 = VECTOR('',#474822,1.); +#474822 = DIRECTION('',(0.,1.,0.)); +#474823 = ORIENTED_EDGE('',*,*,#474824,.T.); +#474824 = EDGE_CURVE('',#474817,#474825,#474827,.T.); +#474825 = VERTEX_POINT('',#474826); +#474826 = CARTESIAN_POINT('',(153.072419,-125.239598,-7.5E-02)); +#474827 = LINE('',#474828,#474829); +#474828 = CARTESIAN_POINT('',(153.355752,-125.239598,-7.5E-02)); +#474829 = VECTOR('',#474830,1.); +#474830 = DIRECTION('',(-1.,0.,0.)); +#474831 = ORIENTED_EDGE('',*,*,#474832,.T.); +#474832 = EDGE_CURVE('',#474825,#474833,#474835,.T.); +#474833 = VERTEX_POINT('',#474834); +#474834 = CARTESIAN_POINT('',(153.072419,-125.139598,-7.5E-02)); +#474835 = CIRCLE('',#474836,5.000000000003E-02); +#474836 = AXIS2_PLACEMENT_3D('',#474837,#474838,#474839); +#474837 = CARTESIAN_POINT('',(153.07241904771,-125.189598,-7.5E-02)); +#474838 = DIRECTION('',(0.,0.,-1.)); +#474839 = DIRECTION('',(-9.542372936263E-07,-1.,-0.)); +#474840 = ORIENTED_EDGE('',*,*,#474841,.T.); +#474841 = EDGE_CURVE('',#474833,#474842,#474844,.T.); +#474842 = VERTEX_POINT('',#474843); +#474843 = CARTESIAN_POINT('',(153.355752,-125.139598,-7.5E-02)); +#474844 = LINE('',#474845,#474846); +#474845 = CARTESIAN_POINT('',(153.072419,-125.139598,-7.5E-02)); +#474846 = VECTOR('',#474847,1.); +#474847 = DIRECTION('',(1.,0.,0.)); +#474848 = ORIENTED_EDGE('',*,*,#474849,.T.); +#474849 = EDGE_CURVE('',#474842,#474850,#474852,.T.); +#474850 = VERTEX_POINT('',#474851); +#474851 = CARTESIAN_POINT('',(153.355752,-125.046741,-7.5E-02)); +#474852 = LINE('',#474853,#474854); +#474853 = CARTESIAN_POINT('',(153.355752,-125.139598,-7.5E-02)); +#474854 = VECTOR('',#474855,1.); +#474855 = DIRECTION('',(0.,1.,0.)); +#474856 = ORIENTED_EDGE('',*,*,#474857,.T.); +#474857 = EDGE_CURVE('',#474850,#474700,#474858,.T.); +#474858 = LINE('',#474859,#474860); +#474859 = CARTESIAN_POINT('',(153.355752,-125.046741,-7.5E-02)); +#474860 = VECTOR('',#474861,1.); +#474861 = DIRECTION('',(0.195090852695,0.980785174845,0.)); +#474862 = PLANE('',#474863); +#474863 = AXIS2_PLACEMENT_3D('',#474864,#474865,#474866); +#474864 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474865 = DIRECTION('',(-0.,-0.,-1.)); +#474866 = DIRECTION('',(-1.,0.,0.)); +#474867 = SHELL_BASED_SURFACE_MODEL('',(#474868)); +#474868 = OPEN_SHELL('',(#474869)); +#474869 = ADVANCED_FACE('',(#474870),#474956,.T.); +#474870 = FACE_BOUND('',#474871,.T.); +#474871 = EDGE_LOOP('',(#474872,#474883,#474891,#474900,#474908,#474917, + #474925,#474933,#474941,#474950)); +#474872 = ORIENTED_EDGE('',*,*,#474873,.T.); +#474873 = EDGE_CURVE('',#474874,#474876,#474878,.T.); +#474874 = VERTEX_POINT('',#474875); +#474875 = CARTESIAN_POINT('',(145.9675,-124.34,-7.5E-02)); +#474876 = VERTEX_POINT('',#474877); +#474877 = CARTESIAN_POINT('',(146.0275,-124.28,-7.5E-02)); +#474878 = CIRCLE('',#474879,5.999932016262E-02); +#474879 = AXIS2_PLACEMENT_3D('',#474880,#474881,#474882); +#474880 = CARTESIAN_POINT('',(146.02749932015,-124.3399993201,-7.5E-02) + ); +#474881 = DIRECTION('',(0.,0.,-1.)); +#474882 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#474883 = ORIENTED_EDGE('',*,*,#474884,.T.); +#474884 = EDGE_CURVE('',#474876,#474885,#474887,.T.); +#474885 = VERTEX_POINT('',#474886); +#474886 = CARTESIAN_POINT('',(147.5475,-124.28,-7.5E-02)); +#474887 = LINE('',#474888,#474889); +#474888 = CARTESIAN_POINT('',(146.0275,-124.28,-7.5E-02)); +#474889 = VECTOR('',#474890,1.); +#474890 = DIRECTION('',(1.,0.,0.)); +#474891 = ORIENTED_EDGE('',*,*,#474892,.T.); +#474892 = EDGE_CURVE('',#474885,#474893,#474895,.T.); +#474893 = VERTEX_POINT('',#474894); +#474894 = CARTESIAN_POINT('',(147.6075,-124.34,-7.5E-02)); +#474895 = CIRCLE('',#474896,5.999932016257E-02); +#474896 = AXIS2_PLACEMENT_3D('',#474897,#474898,#474899); +#474897 = CARTESIAN_POINT('',(147.54750067984,-124.3399993201,-7.5E-02) + ); +#474898 = DIRECTION('',(0.,0.,-1.)); +#474899 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#474900 = ORIENTED_EDGE('',*,*,#474901,.T.); +#474901 = EDGE_CURVE('',#474893,#474902,#474904,.T.); +#474902 = VERTEX_POINT('',#474903); +#474903 = CARTESIAN_POINT('',(147.6075,-125.34,-7.5E-02)); +#474904 = LINE('',#474905,#474906); +#474905 = CARTESIAN_POINT('',(147.6075,-124.34,-7.5E-02)); +#474906 = VECTOR('',#474907,1.); +#474907 = DIRECTION('',(0.,-1.,0.)); +#474908 = ORIENTED_EDGE('',*,*,#474909,.T.); +#474909 = EDGE_CURVE('',#474902,#474910,#474912,.T.); +#474910 = VERTEX_POINT('',#474911); +#474911 = CARTESIAN_POINT('',(147.4875,-125.34,-7.5E-02)); +#474912 = CIRCLE('',#474913,6.000000000042E-02); +#474913 = AXIS2_PLACEMENT_3D('',#474914,#474915,#474916); +#474914 = CARTESIAN_POINT('',(147.5475,-125.3400002255,-7.5E-02)); +#474915 = DIRECTION('',(0.,0.,-1.)); +#474916 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#474917 = ORIENTED_EDGE('',*,*,#474918,.T.); +#474918 = EDGE_CURVE('',#474910,#474919,#474921,.T.); +#474919 = VERTEX_POINT('',#474920); +#474920 = CARTESIAN_POINT('',(147.4875,-124.4,-7.5E-02)); +#474921 = LINE('',#474922,#474923); +#474922 = CARTESIAN_POINT('',(147.4875,-125.34,-7.5E-02)); +#474923 = VECTOR('',#474924,1.); +#474924 = DIRECTION('',(0.,1.,0.)); +#474925 = ORIENTED_EDGE('',*,*,#474926,.T.); +#474926 = EDGE_CURVE('',#474919,#474927,#474929,.T.); +#474927 = VERTEX_POINT('',#474928); +#474928 = CARTESIAN_POINT('',(146.085511,-124.4,-7.5E-02)); +#474929 = LINE('',#474930,#474931); +#474930 = CARTESIAN_POINT('',(147.4875,-124.4,-7.5E-02)); +#474931 = VECTOR('',#474932,1.); +#474932 = DIRECTION('',(-1.,0.,0.)); +#474933 = ORIENTED_EDGE('',*,*,#474934,.T.); +#474934 = EDGE_CURVE('',#474927,#474935,#474937,.T.); +#474935 = VERTEX_POINT('',#474936); +#474936 = CARTESIAN_POINT('',(146.082933,-124.412961,-7.5E-02)); +#474937 = LINE('',#474938,#474939); +#474938 = CARTESIAN_POINT('',(146.085511,-124.4,-7.5E-02)); +#474939 = VECTOR('',#474940,1.); +#474940 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#474941 = ORIENTED_EDGE('',*,*,#474942,.T.); +#474942 = EDGE_CURVE('',#474935,#474943,#474945,.T.); +#474943 = VERTEX_POINT('',#474944); +#474944 = CARTESIAN_POINT('',(145.9675,-124.39,-7.5E-02)); +#474945 = CIRCLE('',#474946,6.000007318647E-02); +#474946 = AXIS2_PLACEMENT_3D('',#474947,#474948,#474949); +#474947 = CARTESIAN_POINT('',(146.02750007318,-124.3900001766,-7.5E-02) + ); +#474948 = DIRECTION('',(-0.,0.,-1.)); +#474949 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#474950 = ORIENTED_EDGE('',*,*,#474951,.T.); +#474951 = EDGE_CURVE('',#474943,#474874,#474952,.T.); +#474952 = LINE('',#474953,#474954); +#474953 = CARTESIAN_POINT('',(145.9675,-124.39,-7.5E-02)); +#474954 = VECTOR('',#474955,1.); +#474955 = DIRECTION('',(0.,1.,0.)); +#474956 = PLANE('',#474957); +#474957 = AXIS2_PLACEMENT_3D('',#474958,#474959,#474960); +#474958 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#474959 = DIRECTION('',(-0.,-0.,-1.)); +#474960 = DIRECTION('',(-1.,0.,0.)); +#474961 = SHELL_BASED_SURFACE_MODEL('',(#474962)); +#474962 = OPEN_SHELL('',(#474963)); +#474963 = ADVANCED_FACE('',(#474964,#475041),#475118,.T.); +#474964 = FACE_BOUND('',#474965,.T.); +#474965 = EDGE_LOOP('',(#474966,#474977,#474985,#474993,#475001,#475010, + #475018,#475026,#475035)); +#474966 = ORIENTED_EDGE('',*,*,#474967,.T.); +#474967 = EDGE_CURVE('',#474968,#474970,#474972,.T.); +#474968 = VERTEX_POINT('',#474969); +#474969 = CARTESIAN_POINT('',(151.798705,-125.116721,-7.5E-02)); +#474970 = VERTEX_POINT('',#474971); +#474971 = CARTESIAN_POINT('',(151.975011,-124.618032,-7.5E-02)); +#474972 = CIRCLE('',#474973,0.320678184363); +#474973 = AXIS2_PLACEMENT_3D('',#474974,#474975,#474976); +#474974 = CARTESIAN_POINT('',(152.05784510741,-124.9278271074,-7.5E-02) + ); +#474975 = DIRECTION('',(0.,0.,-1.)); +#474976 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#474977 = ORIENTED_EDGE('',*,*,#474978,.T.); +#474978 = EDGE_CURVE('',#474970,#474979,#474981,.T.); +#474979 = VERTEX_POINT('',#474980); +#474980 = CARTESIAN_POINT('',(152.274454,-124.616278,-7.5E-02)); +#474981 = LINE('',#474982,#474983); +#474982 = CARTESIAN_POINT('',(151.975011,-124.618032,-7.5E-02)); +#474983 = VECTOR('',#474984,1.); +#474984 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#474985 = ORIENTED_EDGE('',*,*,#474986,.T.); +#474986 = EDGE_CURVE('',#474979,#474987,#474989,.T.); +#474987 = VERTEX_POINT('',#474988); +#474988 = CARTESIAN_POINT('',(152.294359,-124.621069,-7.5E-02)); +#474989 = LINE('',#474990,#474991); +#474990 = CARTESIAN_POINT('',(152.274454,-124.616278,-7.5E-02)); +#474991 = VECTOR('',#474992,1.); +#474992 = DIRECTION('',(0.972234133224,-0.234010235232,0.)); +#474993 = ORIENTED_EDGE('',*,*,#474994,.T.); +#474994 = EDGE_CURVE('',#474987,#474995,#474997,.T.); +#474995 = VERTEX_POINT('',#474996); +#474996 = CARTESIAN_POINT('',(152.402591,-124.678053,-7.5E-02)); +#474997 = LINE('',#474998,#474999); +#474998 = CARTESIAN_POINT('',(152.294359,-124.621069,-7.5E-02)); +#474999 = VECTOR('',#475000,1.); +#475000 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#475001 = ORIENTED_EDGE('',*,*,#475002,.T.); +#475002 = EDGE_CURVE('',#474995,#475003,#475005,.T.); +#475003 = VERTEX_POINT('',#475004); +#475004 = CARTESIAN_POINT('',(152.510232,-125.010395,-7.5E-02)); +#475005 = CIRCLE('',#475006,0.323553911777); +#475006 = AXIS2_PLACEMENT_3D('',#475007,#475008,#475009); +#475007 = CARTESIAN_POINT('',(152.19730715022,-124.928144333,-7.5E-02)); +#475008 = DIRECTION('',(0.,0.,-1.)); +#475009 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#475010 = ORIENTED_EDGE('',*,*,#475011,.T.); +#475011 = EDGE_CURVE('',#475003,#475012,#475014,.T.); +#475012 = VERTEX_POINT('',#475013); +#475013 = CARTESIAN_POINT('',(152.450211,-125.129717,-7.5E-02)); +#475014 = LINE('',#475015,#475016); +#475015 = CARTESIAN_POINT('',(152.510232,-125.010395,-7.5E-02)); +#475016 = VECTOR('',#475017,1.); +#475017 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#475018 = ORIENTED_EDGE('',*,*,#475019,.T.); +#475019 = EDGE_CURVE('',#475012,#475020,#475022,.T.); +#475020 = VERTEX_POINT('',#475021); +#475021 = CARTESIAN_POINT('',(152.389596,-125.186702,-7.5E-02)); +#475022 = LINE('',#475023,#475024); +#475023 = CARTESIAN_POINT('',(152.450211,-125.129717,-7.5E-02)); +#475024 = VECTOR('',#475025,1.); +#475025 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#475026 = ORIENTED_EDGE('',*,*,#475027,.T.); +#475027 = EDGE_CURVE('',#475020,#475028,#475030,.T.); +#475028 = VERTEX_POINT('',#475029); +#475029 = CARTESIAN_POINT('',(151.85569,-125.177335,-7.5E-02)); +#475030 = CIRCLE('',#475031,0.484201554455); +#475031 = AXIS2_PLACEMENT_3D('',#475032,#475033,#475034); +#475032 = CARTESIAN_POINT('',(152.12972870064,-124.778143397,-7.5E-02)); +#475033 = DIRECTION('',(-0.,0.,-1.)); +#475034 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#475035 = ORIENTED_EDGE('',*,*,#475036,.T.); +#475036 = EDGE_CURVE('',#475028,#474968,#475037,.T.); +#475037 = LINE('',#475038,#475039); +#475038 = CARTESIAN_POINT('',(151.85569,-125.177335,-7.5E-02)); +#475039 = VECTOR('',#475040,1.); +#475040 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#475041 = FACE_BOUND('',#475042,.T.); +#475042 = EDGE_LOOP('',(#475043,#475054,#475062,#475071,#475079,#475087, + #475096,#475104,#475112)); +#475043 = ORIENTED_EDGE('',*,*,#475044,.T.); +#475044 = EDGE_CURVE('',#475045,#475047,#475049,.T.); +#475045 = VERTEX_POINT('',#475046); +#475046 = CARTESIAN_POINT('',(152.337617,-124.754501,-7.5E-02)); +#475047 = VERTEX_POINT('',#475048); +#475048 = CARTESIAN_POINT('',(151.920664,-124.754501,-7.5E-02)); +#475049 = CIRCLE('',#475050,0.382072162856); +#475050 = AXIS2_PLACEMENT_3D('',#475051,#475052,#475053); +#475051 = CARTESIAN_POINT('',(152.1291405,-125.0746832708,-7.5E-02)); +#475052 = DIRECTION('',(0.,0.,1.)); +#475053 = DIRECTION('',(0.545646922932,0.838015176172,-0.)); +#475054 = ORIENTED_EDGE('',*,*,#475055,.T.); +#475055 = EDGE_CURVE('',#475047,#475056,#475058,.T.); +#475056 = VERTEX_POINT('',#475057); +#475057 = CARTESIAN_POINT('',(151.884519,-124.790645,-7.5E-02)); +#475058 = LINE('',#475059,#475060); +#475059 = CARTESIAN_POINT('',(151.920664,-124.754501,-7.5E-02)); +#475060 = VECTOR('',#475061,1.); +#475061 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#475062 = ORIENTED_EDGE('',*,*,#475063,.T.); +#475063 = EDGE_CURVE('',#475056,#475064,#475066,.T.); +#475064 = VERTEX_POINT('',#475065); +#475065 = CARTESIAN_POINT('',(151.920664,-125.100887,-7.5E-02)); +#475066 = CIRCLE('',#475067,0.222710800783); +#475067 = AXIS2_PLACEMENT_3D('',#475068,#475069,#475070); +#475068 = CARTESIAN_POINT('',(152.06030434013,-124.9273915355,-7.5E-02) + ); +#475069 = DIRECTION('',(0.,0.,1.)); +#475070 = DIRECTION('',(-0.789298675759,0.614009446543,0.)); +#475071 = ORIENTED_EDGE('',*,*,#475072,.T.); +#475072 = EDGE_CURVE('',#475064,#475073,#475075,.T.); +#475073 = VERTEX_POINT('',#475074); +#475074 = CARTESIAN_POINT('',(151.998088,-125.139599,-7.5E-02)); +#475075 = LINE('',#475076,#475077); +#475076 = CARTESIAN_POINT('',(151.920664,-125.100887,-7.5E-02)); +#475077 = VECTOR('',#475078,1.); +#475078 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#475079 = ORIENTED_EDGE('',*,*,#475080,.T.); +#475080 = EDGE_CURVE('',#475073,#475081,#475083,.T.); +#475081 = VERTEX_POINT('',#475082); +#475082 = CARTESIAN_POINT('',(152.260195,-125.139599,-7.5E-02)); +#475083 = LINE('',#475084,#475085); +#475084 = CARTESIAN_POINT('',(151.998088,-125.139599,-7.5E-02)); +#475085 = VECTOR('',#475086,1.); +#475086 = DIRECTION('',(1.,0.,0.)); +#475087 = ORIENTED_EDGE('',*,*,#475088,.T.); +#475088 = EDGE_CURVE('',#475081,#475089,#475091,.T.); +#475089 = VERTEX_POINT('',#475090); +#475090 = CARTESIAN_POINT('',(152.412475,-124.987319,-7.5E-02)); +#475091 = CIRCLE('',#475092,0.215072998571); +#475092 = AXIS2_PLACEMENT_3D('',#475093,#475094,#475095); +#475093 = CARTESIAN_POINT('',(152.20468813236,-124.9318121323,-7.5E-02) + ); +#475094 = DIRECTION('',(0.,0.,1.)); +#475095 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#475096 = ORIENTED_EDGE('',*,*,#475097,.T.); +#475097 = EDGE_CURVE('',#475089,#475098,#475100,.T.); +#475098 = VERTEX_POINT('',#475099); +#475099 = CARTESIAN_POINT('',(152.412475,-124.868069,-7.5E-02)); +#475100 = LINE('',#475101,#475102); +#475101 = CARTESIAN_POINT('',(152.412475,-124.987319,-7.5E-02)); +#475102 = VECTOR('',#475103,1.); +#475103 = DIRECTION('',(0.,1.,0.)); +#475104 = ORIENTED_EDGE('',*,*,#475105,.T.); +#475105 = EDGE_CURVE('',#475098,#475106,#475108,.T.); +#475106 = VERTEX_POINT('',#475107); +#475107 = CARTESIAN_POINT('',(152.373764,-124.790647,-7.5E-02)); +#475108 = LINE('',#475109,#475110); +#475109 = CARTESIAN_POINT('',(152.412475,-124.868069,-7.5E-02)); +#475110 = VECTOR('',#475111,1.); +#475111 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#475112 = ORIENTED_EDGE('',*,*,#475113,.T.); +#475113 = EDGE_CURVE('',#475106,#475045,#475114,.T.); +#475114 = LINE('',#475115,#475116); +#475115 = CARTESIAN_POINT('',(152.373764,-124.790647,-7.5E-02)); +#475116 = VECTOR('',#475117,1.); +#475117 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#475118 = PLANE('',#475119); +#475119 = AXIS2_PLACEMENT_3D('',#475120,#475121,#475122); +#475120 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475121 = DIRECTION('',(-0.,-0.,-1.)); +#475122 = DIRECTION('',(-1.,0.,0.)); +#475123 = SHELL_BASED_SURFACE_MODEL('',(#475124)); +#475124 = OPEN_SHELL('',(#475125)); +#475125 = ADVANCED_FACE('',(#475126),#475162,.T.); +#475126 = FACE_BOUND('',#475127,.T.); +#475127 = EDGE_LOOP('',(#475128,#475139,#475147,#475156)); +#475128 = ORIENTED_EDGE('',*,*,#475129,.T.); +#475129 = EDGE_CURVE('',#475130,#475132,#475134,.T.); +#475130 = VERTEX_POINT('',#475131); +#475131 = CARTESIAN_POINT('',(153.052535,-124.897867,-7.5E-02)); +#475132 = VERTEX_POINT('',#475133); +#475133 = CARTESIAN_POINT('',(152.997065,-124.814661,-7.5E-02)); +#475134 = CIRCLE('',#475135,5.000039834453E-02); +#475135 = AXIS2_PLACEMENT_3D('',#475136,#475137,#475138); +#475136 = CARTESIAN_POINT('',(153.02480065037,-124.8562635664,-7.5E-02) + ); +#475137 = DIRECTION('',(0.,0.,-1.)); +#475138 = DIRECTION('',(0.554682573513,-0.832062042543,0.)); +#475139 = ORIENTED_EDGE('',*,*,#475140,.T.); +#475140 = EDGE_CURVE('',#475132,#475141,#475143,.T.); +#475141 = VERTEX_POINT('',#475142); +#475142 = CARTESIAN_POINT('',(154.282779,-123.957519,-7.5E-02)); +#475143 = LINE('',#475144,#475145); +#475144 = CARTESIAN_POINT('',(152.997065,-124.814661,-7.5E-02)); +#475145 = VECTOR('',#475146,1.); +#475146 = DIRECTION('',(0.832050493461,0.55469989754,0.)); +#475147 = ORIENTED_EDGE('',*,*,#475148,.T.); +#475148 = EDGE_CURVE('',#475141,#475149,#475151,.T.); +#475149 = VERTEX_POINT('',#475150); +#475150 = CARTESIAN_POINT('',(154.338249,-124.040724,-7.5E-02)); +#475151 = CIRCLE('',#475152,4.999998231263E-02); +#475152 = AXIS2_PLACEMENT_3D('',#475153,#475154,#475155); +#475153 = CARTESIAN_POINT('',(154.31051409846,-123.9991214343,-7.5E-02) + ); +#475154 = DIRECTION('',(0.,0.,-1.)); +#475155 = DIRECTION('',(-0.554702165484,0.832048981495,-0.)); +#475156 = ORIENTED_EDGE('',*,*,#475157,.T.); +#475157 = EDGE_CURVE('',#475149,#475130,#475158,.T.); +#475158 = LINE('',#475159,#475160); +#475159 = CARTESIAN_POINT('',(154.338249,-124.040724,-7.5E-02)); +#475160 = VECTOR('',#475161,1.); +#475161 = DIRECTION('',(-0.832050194776,-0.554700345568,0.)); +#475162 = PLANE('',#475163); +#475163 = AXIS2_PLACEMENT_3D('',#475164,#475165,#475166); +#475164 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475165 = DIRECTION('',(-0.,-0.,-1.)); +#475166 = DIRECTION('',(-1.,0.,0.)); +#475167 = SHELL_BASED_SURFACE_MODEL('',(#475168)); +#475168 = OPEN_SHELL('',(#475169)); +#475169 = ADVANCED_FACE('',(#475170),#475206,.T.); +#475170 = FACE_BOUND('',#475171,.T.); +#475171 = EDGE_LOOP('',(#475172,#475183,#475191,#475200)); +#475172 = ORIENTED_EDGE('',*,*,#475173,.T.); +#475173 = EDGE_CURVE('',#475174,#475176,#475178,.T.); +#475174 = VERTEX_POINT('',#475175); +#475175 = CARTESIAN_POINT('',(125.356359,-124.44,-7.5E-02)); +#475176 = VERTEX_POINT('',#475177); +#475177 = CARTESIAN_POINT('',(125.356359,-124.32,-7.5E-02)); +#475178 = CIRCLE('',#475179,6.000000000043E-02); +#475179 = AXIS2_PLACEMENT_3D('',#475180,#475181,#475182); +#475180 = CARTESIAN_POINT('',(125.35635877441,-124.38,-7.5E-02)); +#475181 = DIRECTION('',(0.,0.,-1.)); +#475182 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#475183 = ORIENTED_EDGE('',*,*,#475184,.T.); +#475184 = EDGE_CURVE('',#475176,#475185,#475187,.T.); +#475185 = VERTEX_POINT('',#475186); +#475186 = CARTESIAN_POINT('',(125.663641,-124.32,-7.5E-02)); +#475187 = LINE('',#475188,#475189); +#475188 = CARTESIAN_POINT('',(125.356359,-124.32,-7.5E-02)); +#475189 = VECTOR('',#475190,1.); +#475190 = DIRECTION('',(1.,0.,0.)); +#475191 = ORIENTED_EDGE('',*,*,#475192,.T.); +#475192 = EDGE_CURVE('',#475185,#475193,#475195,.T.); +#475193 = VERTEX_POINT('',#475194); +#475194 = CARTESIAN_POINT('',(125.663641,-124.44,-7.5E-02)); +#475195 = CIRCLE('',#475196,6.000000000042E-02); +#475196 = AXIS2_PLACEMENT_3D('',#475197,#475198,#475199); +#475197 = CARTESIAN_POINT('',(125.66364122558,-124.38,-7.5E-02)); +#475198 = DIRECTION('',(0.,0.,-1.)); +#475199 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#475200 = ORIENTED_EDGE('',*,*,#475201,.T.); +#475201 = EDGE_CURVE('',#475193,#475174,#475202,.T.); +#475202 = LINE('',#475203,#475204); +#475203 = CARTESIAN_POINT('',(125.663641,-124.44,-7.5E-02)); +#475204 = VECTOR('',#475205,1.); +#475205 = DIRECTION('',(-1.,0.,0.)); +#475206 = PLANE('',#475207); +#475207 = AXIS2_PLACEMENT_3D('',#475208,#475209,#475210); +#475208 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475209 = DIRECTION('',(-0.,-0.,-1.)); +#475210 = DIRECTION('',(-1.,0.,0.)); +#475211 = SHELL_BASED_SURFACE_MODEL('',(#475212)); +#475212 = OPEN_SHELL('',(#475213)); +#475213 = ADVANCED_FACE('',(#475214),#475308,.T.); +#475214 = FACE_BOUND('',#475215,.T.); +#475215 = EDGE_LOOP('',(#475216,#475227,#475235,#475244,#475252,#475261, + #475269,#475278,#475286,#475294,#475302)); +#475216 = ORIENTED_EDGE('',*,*,#475217,.T.); +#475217 = EDGE_CURVE('',#475218,#475220,#475222,.T.); +#475218 = VERTEX_POINT('',#475219); +#475219 = CARTESIAN_POINT('',(151.776674,-124.140555,-7.5E-02)); +#475220 = VERTEX_POINT('',#475221); +#475221 = CARTESIAN_POINT('',(151.795808,-124.044361,-7.5E-02)); +#475222 = CIRCLE('',#475223,4.99999845211E-02); +#475223 = AXIS2_PLACEMENT_3D('',#475224,#475225,#475226); +#475224 = CARTESIAN_POINT('',(151.79580803736,-124.0943609845,-7.5E-02) + ); +#475225 = DIRECTION('',(0.,0.,-1.)); +#475226 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#475227 = ORIENTED_EDGE('',*,*,#475228,.T.); +#475228 = EDGE_CURVE('',#475220,#475229,#475231,.T.); +#475229 = VERTEX_POINT('',#475230); +#475230 = CARTESIAN_POINT('',(152.462475,-124.044361,-7.5E-02)); +#475231 = LINE('',#475232,#475233); +#475232 = CARTESIAN_POINT('',(151.795808,-124.044361,-7.5E-02)); +#475233 = VECTOR('',#475234,1.); +#475234 = DIRECTION('',(1.,0.,0.)); +#475235 = ORIENTED_EDGE('',*,*,#475236,.T.); +#475236 = EDGE_CURVE('',#475229,#475237,#475239,.T.); +#475237 = VERTEX_POINT('',#475238); +#475238 = CARTESIAN_POINT('',(152.462475,-124.144361,-7.5E-02)); +#475239 = CIRCLE('',#475240,5.000000000003E-02); +#475240 = AXIS2_PLACEMENT_3D('',#475241,#475242,#475243); +#475241 = CARTESIAN_POINT('',(152.46247495228,-124.094361,-7.5E-02)); +#475242 = DIRECTION('',(0.,0.,-1.)); +#475243 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#475244 = ORIENTED_EDGE('',*,*,#475245,.T.); +#475245 = EDGE_CURVE('',#475237,#475246,#475248,.T.); +#475246 = VERTEX_POINT('',#475247); +#475247 = CARTESIAN_POINT('',(151.998088,-124.144361,-7.5E-02)); +#475248 = LINE('',#475249,#475250); +#475249 = CARTESIAN_POINT('',(152.462475,-124.144361,-7.5E-02)); +#475250 = VECTOR('',#475251,1.); +#475251 = DIRECTION('',(-1.,0.,0.)); +#475252 = ORIENTED_EDGE('',*,*,#475253,.T.); +#475253 = EDGE_CURVE('',#475246,#475254,#475256,.T.); +#475254 = VERTEX_POINT('',#475255); +#475255 = CARTESIAN_POINT('',(151.845808,-124.29664,-7.5E-02)); +#475256 = CIRCLE('',#475257,0.215060043145); +#475257 = AXIS2_PLACEMENT_3D('',#475258,#475259,#475260); +#475258 = CARTESIAN_POINT('',(152.05358399719,-124.3521373616,-7.5E-02) + ); +#475259 = DIRECTION('',(0.,0.,1.)); +#475260 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#475261 = ORIENTED_EDGE('',*,*,#475262,.T.); +#475262 = EDGE_CURVE('',#475254,#475263,#475265,.T.); +#475263 = VERTEX_POINT('',#475264); +#475264 = CARTESIAN_POINT('',(151.845808,-124.380075,-7.5E-02)); +#475265 = LINE('',#475266,#475267); +#475266 = CARTESIAN_POINT('',(151.845808,-124.29664,-7.5E-02)); +#475267 = VECTOR('',#475268,1.); +#475268 = DIRECTION('',(0.,-1.,0.)); +#475269 = ORIENTED_EDGE('',*,*,#475270,.T.); +#475270 = EDGE_CURVE('',#475263,#475271,#475273,.T.); +#475271 = VERTEX_POINT('',#475272); +#475272 = CARTESIAN_POINT('',(151.745808,-124.380075,-7.5E-02)); +#475273 = CIRCLE('',#475274,5.000000000002E-02); +#475274 = AXIS2_PLACEMENT_3D('',#475275,#475276,#475277); +#475275 = CARTESIAN_POINT('',(151.795808,-124.3800749522,-7.5E-02)); +#475276 = DIRECTION('',(-0.,0.,-1.)); +#475277 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#475278 = ORIENTED_EDGE('',*,*,#475279,.T.); +#475279 = EDGE_CURVE('',#475271,#475280,#475282,.T.); +#475280 = VERTEX_POINT('',#475281); +#475281 = CARTESIAN_POINT('',(151.74805,-124.273564,-7.5E-02)); +#475282 = LINE('',#475283,#475284); +#475283 = CARTESIAN_POINT('',(151.745808,-124.380075,-7.5E-02)); +#475284 = VECTOR('',#475285,1.); +#475285 = DIRECTION('',(2.104480731703E-02,0.999778533519,0.)); +#475286 = ORIENTED_EDGE('',*,*,#475287,.T.); +#475287 = EDGE_CURVE('',#475280,#475288,#475290,.T.); +#475288 = VERTEX_POINT('',#475289); +#475289 = CARTESIAN_POINT('',(151.808072,-124.154244,-7.5E-02)); +#475290 = LINE('',#475291,#475292); +#475291 = CARTESIAN_POINT('',(151.74805,-124.273564,-7.5E-02)); +#475292 = VECTOR('',#475293,1.); +#475293 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#475294 = ORIENTED_EDGE('',*,*,#475295,.T.); +#475295 = EDGE_CURVE('',#475288,#475296,#475298,.T.); +#475296 = VERTEX_POINT('',#475297); +#475297 = CARTESIAN_POINT('',(151.817955,-124.144361,-7.5E-02)); +#475298 = LINE('',#475299,#475300); +#475299 = CARTESIAN_POINT('',(151.808072,-124.154244,-7.5E-02)); +#475300 = VECTOR('',#475301,1.); +#475301 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#475302 = ORIENTED_EDGE('',*,*,#475303,.T.); +#475303 = EDGE_CURVE('',#475296,#475218,#475304,.T.); +#475304 = LINE('',#475305,#475306); +#475305 = CARTESIAN_POINT('',(151.817955,-124.144361,-7.5E-02)); +#475306 = VECTOR('',#475307,1.); +#475307 = DIRECTION('',(-0.995776727161,9.180800425308E-02,0.)); +#475308 = PLANE('',#475309); +#475309 = AXIS2_PLACEMENT_3D('',#475310,#475311,#475312); +#475310 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475311 = DIRECTION('',(-0.,-0.,-1.)); +#475312 = DIRECTION('',(-1.,0.,0.)); +#475313 = SHELL_BASED_SURFACE_MODEL('',(#475314)); +#475314 = OPEN_SHELL('',(#475315)); +#475315 = ADVANCED_FACE('',(#475316),#475482,.T.); +#475316 = FACE_BOUND('',#475317,.T.); +#475317 = EDGE_LOOP('',(#475318,#475329,#475337,#475345,#475353,#475361, + #475369,#475377,#475386,#475394,#475402,#475410,#475418,#475426, + #475435,#475443,#475451,#475460,#475468,#475476)); +#475318 = ORIENTED_EDGE('',*,*,#475319,.T.); +#475319 = EDGE_CURVE('',#475320,#475322,#475324,.T.); +#475320 = VERTEX_POINT('',#475321); +#475321 = CARTESIAN_POINT('',(151.749614,-123.360941,-7.5E-02)); +#475322 = VERTEX_POINT('',#475323); +#475323 = CARTESIAN_POINT('',(151.845808,-123.380075,-7.5E-02)); +#475324 = CIRCLE('',#475325,4.999998452108E-02); +#475325 = AXIS2_PLACEMENT_3D('',#475326,#475327,#475328); +#475326 = CARTESIAN_POINT('',(151.79580801547,-123.3800750373,-7.5E-02) + ); +#475327 = DIRECTION('',(0.,0.,-1.)); +#475328 = DIRECTION('',(-0.923880595592,0.382680865851,0.)); +#475329 = ORIENTED_EDGE('',*,*,#475330,.T.); +#475330 = EDGE_CURVE('',#475322,#475331,#475333,.T.); +#475331 = VERTEX_POINT('',#475332); +#475332 = CARTESIAN_POINT('',(151.845808,-123.472932,-7.5E-02)); +#475333 = LINE('',#475334,#475335); +#475334 = CARTESIAN_POINT('',(151.845808,-123.380075,-7.5E-02)); +#475335 = VECTOR('',#475336,1.); +#475336 = DIRECTION('',(0.,-1.,0.)); +#475337 = ORIENTED_EDGE('',*,*,#475338,.T.); +#475338 = EDGE_CURVE('',#475331,#475339,#475341,.T.); +#475339 = VERTEX_POINT('',#475340); +#475340 = CARTESIAN_POINT('',(152.330885,-123.475173,-7.5E-02)); +#475341 = LINE('',#475342,#475343); +#475342 = CARTESIAN_POINT('',(151.845808,-123.472932,-7.5E-02)); +#475343 = VECTOR('',#475344,1.); +#475344 = DIRECTION('',(0.999989328502,-4.619835789308E-03,0.)); +#475345 = ORIENTED_EDGE('',*,*,#475346,.T.); +#475346 = EDGE_CURVE('',#475339,#475347,#475349,.T.); +#475347 = VERTEX_POINT('',#475348); +#475348 = CARTESIAN_POINT('',(152.447616,-123.532778,-7.5E-02)); +#475349 = LINE('',#475350,#475351); +#475350 = CARTESIAN_POINT('',(152.330885,-123.475173,-7.5E-02)); +#475351 = VECTOR('',#475352,1.); +#475352 = DIRECTION('',(0.896751907126,-0.442533633825,0.)); +#475353 = ORIENTED_EDGE('',*,*,#475354,.T.); +#475354 = EDGE_CURVE('',#475347,#475355,#475357,.T.); +#475355 = VERTEX_POINT('',#475356); +#475356 = CARTESIAN_POINT('',(152.459577,-123.54819,-7.5E-02)); +#475357 = LINE('',#475358,#475359); +#475358 = CARTESIAN_POINT('',(152.447616,-123.532778,-7.5E-02)); +#475359 = VECTOR('',#475360,1.); +#475360 = DIRECTION('',(0.613106329879,-0.790000397635,0.)); +#475361 = ORIENTED_EDGE('',*,*,#475362,.T.); +#475362 = EDGE_CURVE('',#475355,#475363,#475365,.T.); +#475363 = VERTEX_POINT('',#475364); +#475364 = CARTESIAN_POINT('',(152.510232,-123.654516,-7.5E-02)); +#475365 = LINE('',#475366,#475367); +#475366 = CARTESIAN_POINT('',(152.459577,-123.54819,-7.5E-02)); +#475367 = VECTOR('',#475368,1.); +#475368 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#475369 = ORIENTED_EDGE('',*,*,#475370,.T.); +#475370 = EDGE_CURVE('',#475363,#475371,#475373,.T.); +#475371 = VERTEX_POINT('',#475372); +#475372 = CARTESIAN_POINT('',(152.512475,-123.761027,-7.5E-02)); +#475373 = LINE('',#475374,#475375); +#475374 = CARTESIAN_POINT('',(152.510232,-123.654516,-7.5E-02)); +#475375 = VECTOR('',#475376,1.); +#475376 = DIRECTION('',(2.10541897794E-02,-0.999778335979,0.)); +#475377 = ORIENTED_EDGE('',*,*,#475378,.T.); +#475378 = EDGE_CURVE('',#475371,#475379,#475381,.T.); +#475379 = VERTEX_POINT('',#475380); +#475380 = CARTESIAN_POINT('',(152.412475,-123.761027,-7.5E-02)); +#475381 = CIRCLE('',#475382,5.000000000002E-02); +#475382 = AXIS2_PLACEMENT_3D('',#475383,#475384,#475385); +#475383 = CARTESIAN_POINT('',(152.462475,-123.7610269522,-7.5E-02)); +#475384 = DIRECTION('',(-0.,0.,-1.)); +#475385 = DIRECTION('',(1.,-9.542364409753E-07,-0.)); +#475386 = ORIENTED_EDGE('',*,*,#475387,.T.); +#475387 = EDGE_CURVE('',#475379,#475388,#475390,.T.); +#475388 = VERTEX_POINT('',#475389); +#475389 = CARTESIAN_POINT('',(152.412475,-123.677592,-7.5E-02)); +#475390 = LINE('',#475391,#475392); +#475391 = CARTESIAN_POINT('',(152.412475,-123.761027,-7.5E-02)); +#475392 = VECTOR('',#475393,1.); +#475393 = DIRECTION('',(0.,1.,0.)); +#475394 = ORIENTED_EDGE('',*,*,#475395,.T.); +#475395 = EDGE_CURVE('',#475388,#475396,#475398,.T.); +#475396 = VERTEX_POINT('',#475397); +#475397 = CARTESIAN_POINT('',(152.377588,-123.607818,-7.5E-02)); +#475398 = LINE('',#475399,#475400); +#475399 = CARTESIAN_POINT('',(152.412475,-123.677592,-7.5E-02)); +#475400 = VECTOR('',#475401,1.); +#475401 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#475402 = ORIENTED_EDGE('',*,*,#475403,.T.); +#475403 = EDGE_CURVE('',#475396,#475404,#475406,.T.); +#475404 = VERTEX_POINT('',#475405); +#475405 = CARTESIAN_POINT('',(152.307815,-123.572932,-7.5E-02)); +#475406 = LINE('',#475407,#475408); +#475407 = CARTESIAN_POINT('',(152.377588,-123.607818,-7.5E-02)); +#475408 = VECTOR('',#475409,1.); +#475409 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#475410 = ORIENTED_EDGE('',*,*,#475411,.T.); +#475411 = EDGE_CURVE('',#475404,#475412,#475414,.T.); +#475412 = VERTEX_POINT('',#475413); +#475413 = CARTESIAN_POINT('',(151.845808,-123.572932,-7.5E-02)); +#475414 = LINE('',#475415,#475416); +#475415 = CARTESIAN_POINT('',(152.307815,-123.572932,-7.5E-02)); +#475416 = VECTOR('',#475417,1.); +#475417 = DIRECTION('',(-1.,0.,0.)); +#475418 = ORIENTED_EDGE('',*,*,#475419,.T.); +#475419 = EDGE_CURVE('',#475412,#475420,#475422,.T.); +#475420 = VERTEX_POINT('',#475421); +#475421 = CARTESIAN_POINT('',(151.845808,-123.761027,-7.5E-02)); +#475422 = LINE('',#475423,#475424); +#475423 = CARTESIAN_POINT('',(151.845808,-123.572932,-7.5E-02)); +#475424 = VECTOR('',#475425,1.); +#475425 = DIRECTION('',(0.,-1.,0.)); +#475426 = ORIENTED_EDGE('',*,*,#475427,.T.); +#475427 = EDGE_CURVE('',#475420,#475428,#475430,.T.); +#475428 = VERTEX_POINT('',#475429); +#475429 = CARTESIAN_POINT('',(151.745808,-123.761027,-7.5E-02)); +#475430 = CIRCLE('',#475431,5.000000000003E-02); +#475431 = AXIS2_PLACEMENT_3D('',#475432,#475433,#475434); +#475432 = CARTESIAN_POINT('',(151.795808,-123.7610269522,-7.5E-02)); +#475433 = DIRECTION('',(-0.,0.,-1.)); +#475434 = DIRECTION('',(1.,-9.542367251918E-07,-0.)); +#475435 = ORIENTED_EDGE('',*,*,#475436,.T.); +#475436 = EDGE_CURVE('',#475428,#475437,#475439,.T.); +#475437 = VERTEX_POINT('',#475438); +#475438 = CARTESIAN_POINT('',(151.745808,-123.572932,-7.5E-02)); +#475439 = LINE('',#475440,#475441); +#475440 = CARTESIAN_POINT('',(151.745808,-123.761027,-7.5E-02)); +#475441 = VECTOR('',#475442,1.); +#475442 = DIRECTION('',(0.,1.,0.)); +#475443 = ORIENTED_EDGE('',*,*,#475444,.T.); +#475444 = EDGE_CURVE('',#475437,#475445,#475447,.T.); +#475445 = VERTEX_POINT('',#475446); +#475446 = CARTESIAN_POINT('',(151.462475,-123.572932,-7.5E-02)); +#475447 = LINE('',#475448,#475449); +#475448 = CARTESIAN_POINT('',(151.745808,-123.572932,-7.5E-02)); +#475449 = VECTOR('',#475450,1.); +#475450 = DIRECTION('',(-1.,0.,0.)); +#475451 = ORIENTED_EDGE('',*,*,#475452,.T.); +#475452 = EDGE_CURVE('',#475445,#475453,#475455,.T.); +#475453 = VERTEX_POINT('',#475454); +#475454 = CARTESIAN_POINT('',(151.462475,-123.472932,-7.5E-02)); +#475455 = CIRCLE('',#475456,5.000000000002E-02); +#475456 = AXIS2_PLACEMENT_3D('',#475457,#475458,#475459); +#475457 = CARTESIAN_POINT('',(151.46247504771,-123.522932,-7.5E-02)); +#475458 = DIRECTION('',(0.,0.,-1.)); +#475459 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#475460 = ORIENTED_EDGE('',*,*,#475461,.T.); +#475461 = EDGE_CURVE('',#475453,#475462,#475464,.T.); +#475462 = VERTEX_POINT('',#475463); +#475463 = CARTESIAN_POINT('',(151.745808,-123.472932,-7.5E-02)); +#475464 = LINE('',#475465,#475466); +#475465 = CARTESIAN_POINT('',(151.462475,-123.472932,-7.5E-02)); +#475466 = VECTOR('',#475467,1.); +#475467 = DIRECTION('',(1.,0.,0.)); +#475468 = ORIENTED_EDGE('',*,*,#475469,.T.); +#475469 = EDGE_CURVE('',#475462,#475470,#475472,.T.); +#475470 = VERTEX_POINT('',#475471); +#475471 = CARTESIAN_POINT('',(151.745808,-123.380075,-7.5E-02)); +#475472 = LINE('',#475473,#475474); +#475473 = CARTESIAN_POINT('',(151.745808,-123.472932,-7.5E-02)); +#475474 = VECTOR('',#475475,1.); +#475475 = DIRECTION('',(0.,1.,0.)); +#475476 = ORIENTED_EDGE('',*,*,#475477,.T.); +#475477 = EDGE_CURVE('',#475470,#475320,#475478,.T.); +#475478 = LINE('',#475479,#475480); +#475479 = CARTESIAN_POINT('',(151.745808,-123.380075,-7.5E-02)); +#475480 = VECTOR('',#475481,1.); +#475481 = DIRECTION('',(0.195090852694,0.980785174845,0.)); +#475482 = PLANE('',#475483); +#475483 = AXIS2_PLACEMENT_3D('',#475484,#475485,#475486); +#475484 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475485 = DIRECTION('',(-0.,-0.,-1.)); +#475486 = DIRECTION('',(-1.,0.,0.)); +#475487 = SHELL_BASED_SURFACE_MODEL('',(#475488)); +#475488 = OPEN_SHELL('',(#475489)); +#475489 = ADVANCED_FACE('',(#475490),#475714,.T.); +#475490 = FACE_BOUND('',#475491,.T.); +#475491 = EDGE_LOOP('',(#475492,#475503,#475511,#475520,#475528,#475536, + #475544,#475552,#475560,#475568,#475576,#475585,#475593,#475601, + #475610,#475618,#475626,#475635,#475643,#475651,#475659,#475668, + #475676,#475684,#475692,#475700,#475708)); +#475492 = ORIENTED_EDGE('',*,*,#475493,.T.); +#475493 = EDGE_CURVE('',#475494,#475496,#475498,.T.); +#475494 = VERTEX_POINT('',#475495); +#475495 = CARTESIAN_POINT('',(153.386618,-122.85484,-7.5E-02)); +#475496 = VERTEX_POINT('',#475497); +#475497 = CARTESIAN_POINT('',(153.405752,-122.758646,-7.5E-02)); +#475498 = CIRCLE('',#475499,4.999998452108E-02); +#475499 = AXIS2_PLACEMENT_3D('',#475500,#475501,#475502); +#475500 = CARTESIAN_POINT('',(153.40575203736,-122.8086459845,-7.5E-02) + ); +#475501 = DIRECTION('',(0.,0.,-1.)); +#475502 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#475503 = ORIENTED_EDGE('',*,*,#475504,.T.); +#475504 = EDGE_CURVE('',#475496,#475505,#475507,.T.); +#475505 = VERTEX_POINT('',#475506); +#475506 = CARTESIAN_POINT('',(154.072419,-122.758646,-7.5E-02)); +#475507 = LINE('',#475508,#475509); +#475508 = CARTESIAN_POINT('',(153.405752,-122.758646,-7.5E-02)); +#475509 = VECTOR('',#475510,1.); +#475510 = DIRECTION('',(1.,0.,0.)); +#475511 = ORIENTED_EDGE('',*,*,#475512,.T.); +#475512 = EDGE_CURVE('',#475505,#475513,#475515,.T.); +#475513 = VERTEX_POINT('',#475514); +#475514 = CARTESIAN_POINT('',(154.072419,-122.858646,-7.5E-02)); +#475515 = CIRCLE('',#475516,5.000000000002E-02); +#475516 = AXIS2_PLACEMENT_3D('',#475517,#475518,#475519); +#475517 = CARTESIAN_POINT('',(154.07241895228,-122.808646,-7.5E-02)); +#475518 = DIRECTION('',(0.,0.,-1.)); +#475519 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#475520 = ORIENTED_EDGE('',*,*,#475521,.T.); +#475521 = EDGE_CURVE('',#475513,#475522,#475524,.T.); +#475522 = VERTEX_POINT('',#475523); +#475523 = CARTESIAN_POINT('',(153.521701,-122.858646,-7.5E-02)); +#475524 = LINE('',#475525,#475526); +#475525 = CARTESIAN_POINT('',(154.072419,-122.858646,-7.5E-02)); +#475526 = VECTOR('',#475527,1.); +#475527 = DIRECTION('',(-1.,0.,0.)); +#475528 = ORIENTED_EDGE('',*,*,#475529,.T.); +#475529 = EDGE_CURVE('',#475522,#475530,#475532,.T.); +#475530 = VERTEX_POINT('',#475531); +#475531 = CARTESIAN_POINT('',(153.494463,-122.885882,-7.5E-02)); +#475532 = LINE('',#475533,#475534); +#475533 = CARTESIAN_POINT('',(153.521701,-122.858646,-7.5E-02)); +#475534 = VECTOR('',#475535,1.); +#475535 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#475536 = ORIENTED_EDGE('',*,*,#475537,.T.); +#475537 = EDGE_CURVE('',#475530,#475538,#475540,.T.); +#475538 = VERTEX_POINT('',#475539); +#475539 = CARTESIAN_POINT('',(153.455752,-122.963306,-7.5E-02)); +#475540 = LINE('',#475541,#475542); +#475541 = CARTESIAN_POINT('',(153.494463,-122.885882,-7.5E-02)); +#475542 = VECTOR('',#475543,1.); +#475543 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#475544 = ORIENTED_EDGE('',*,*,#475545,.T.); +#475545 = EDGE_CURVE('',#475538,#475546,#475548,.T.); +#475546 = VERTEX_POINT('',#475547); +#475547 = CARTESIAN_POINT('',(153.455752,-123.082557,-7.5E-02)); +#475548 = LINE('',#475549,#475550); +#475549 = CARTESIAN_POINT('',(153.455752,-122.963306,-7.5E-02)); +#475550 = VECTOR('',#475551,1.); +#475551 = DIRECTION('',(0.,-1.,0.)); +#475552 = ORIENTED_EDGE('',*,*,#475553,.T.); +#475553 = EDGE_CURVE('',#475546,#475554,#475556,.T.); +#475554 = VERTEX_POINT('',#475555); +#475555 = CARTESIAN_POINT('',(153.490638,-123.15233,-7.5E-02)); +#475556 = LINE('',#475557,#475558); +#475557 = CARTESIAN_POINT('',(153.455752,-123.082557,-7.5E-02)); +#475558 = VECTOR('',#475559,1.); +#475559 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#475560 = ORIENTED_EDGE('',*,*,#475561,.T.); +#475561 = EDGE_CURVE('',#475554,#475562,#475564,.T.); +#475562 = VERTEX_POINT('',#475563); +#475563 = CARTESIAN_POINT('',(153.560413,-123.187217,-7.5E-02)); +#475564 = LINE('',#475565,#475566); +#475565 = CARTESIAN_POINT('',(153.490638,-123.15233,-7.5E-02)); +#475566 = VECTOR('',#475567,1.); +#475567 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#475568 = ORIENTED_EDGE('',*,*,#475569,.T.); +#475569 = EDGE_CURVE('',#475562,#475570,#475572,.T.); +#475570 = VERTEX_POINT('',#475571); +#475571 = CARTESIAN_POINT('',(154.072419,-123.187217,-7.5E-02)); +#475572 = LINE('',#475573,#475574); +#475573 = CARTESIAN_POINT('',(153.560413,-123.187217,-7.5E-02)); +#475574 = VECTOR('',#475575,1.); +#475575 = DIRECTION('',(1.,0.,0.)); +#475576 = ORIENTED_EDGE('',*,*,#475577,.T.); +#475577 = EDGE_CURVE('',#475570,#475578,#475580,.T.); +#475578 = VERTEX_POINT('',#475579); +#475579 = CARTESIAN_POINT('',(154.072419,-123.287217,-7.5E-02)); +#475580 = CIRCLE('',#475581,5.000000000002E-02); +#475581 = AXIS2_PLACEMENT_3D('',#475582,#475583,#475584); +#475582 = CARTESIAN_POINT('',(154.07241895228,-123.237217,-7.5E-02)); +#475583 = DIRECTION('',(0.,0.,-1.)); +#475584 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#475585 = ORIENTED_EDGE('',*,*,#475586,.T.); +#475586 = EDGE_CURVE('',#475578,#475587,#475589,.T.); +#475587 = VERTEX_POINT('',#475588); +#475588 = CARTESIAN_POINT('',(153.560413,-123.287217,-7.5E-02)); +#475589 = LINE('',#475590,#475591); +#475590 = CARTESIAN_POINT('',(154.072419,-123.287217,-7.5E-02)); +#475591 = VECTOR('',#475592,1.); +#475592 = DIRECTION('',(-1.,0.,0.)); +#475593 = ORIENTED_EDGE('',*,*,#475594,.T.); +#475594 = EDGE_CURVE('',#475587,#475595,#475597,.T.); +#475595 = VERTEX_POINT('',#475596); +#475596 = CARTESIAN_POINT('',(153.490638,-123.322103,-7.5E-02)); +#475597 = LINE('',#475598,#475599); +#475598 = CARTESIAN_POINT('',(153.560413,-123.287217,-7.5E-02)); +#475599 = VECTOR('',#475600,1.); +#475600 = DIRECTION('',(-0.894434882174,-0.44719821282,0.)); +#475601 = ORIENTED_EDGE('',*,*,#475602,.T.); +#475602 = EDGE_CURVE('',#475595,#475603,#475605,.T.); +#475603 = VERTEX_POINT('',#475604); +#475604 = CARTESIAN_POINT('',(153.490638,-123.580902,-7.5E-02)); +#475605 = CIRCLE('',#475606,0.214910383045); +#475606 = AXIS2_PLACEMENT_3D('',#475607,#475608,#475609); +#475607 = CARTESIAN_POINT('',(153.66222541836,-123.4515025,-7.5E-02)); +#475608 = DIRECTION('',(0.,0.,1.)); +#475609 = DIRECTION('',(-0.798413812918,0.602109112489,0.)); +#475610 = ORIENTED_EDGE('',*,*,#475611,.T.); +#475611 = EDGE_CURVE('',#475603,#475612,#475614,.T.); +#475612 = VERTEX_POINT('',#475613); +#475613 = CARTESIAN_POINT('',(153.560413,-123.615789,-7.5E-02)); +#475614 = LINE('',#475615,#475616); +#475615 = CARTESIAN_POINT('',(153.490638,-123.580902,-7.5E-02)); +#475616 = VECTOR('',#475617,1.); +#475617 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#475618 = ORIENTED_EDGE('',*,*,#475619,.T.); +#475619 = EDGE_CURVE('',#475612,#475620,#475622,.T.); +#475620 = VERTEX_POINT('',#475621); +#475621 = CARTESIAN_POINT('',(154.072419,-123.615789,-7.5E-02)); +#475622 = LINE('',#475623,#475624); +#475623 = CARTESIAN_POINT('',(153.560413,-123.615789,-7.5E-02)); +#475624 = VECTOR('',#475625,1.); +#475625 = DIRECTION('',(1.,0.,0.)); +#475626 = ORIENTED_EDGE('',*,*,#475627,.T.); +#475627 = EDGE_CURVE('',#475620,#475628,#475630,.T.); +#475628 = VERTEX_POINT('',#475629); +#475629 = CARTESIAN_POINT('',(154.072419,-123.715789,-7.5E-02)); +#475630 = CIRCLE('',#475631,5.000000000002E-02); +#475631 = AXIS2_PLACEMENT_3D('',#475632,#475633,#475634); +#475632 = CARTESIAN_POINT('',(154.07241895228,-123.665789,-7.5E-02)); +#475633 = DIRECTION('',(0.,0.,-1.)); +#475634 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#475635 = ORIENTED_EDGE('',*,*,#475636,.T.); +#475636 = EDGE_CURVE('',#475628,#475637,#475639,.T.); +#475637 = VERTEX_POINT('',#475638); +#475638 = CARTESIAN_POINT('',(153.537336,-123.713546,-7.5E-02)); +#475639 = LINE('',#475640,#475641); +#475640 = CARTESIAN_POINT('',(154.072419,-123.715789,-7.5E-02)); +#475641 = VECTOR('',#475642,1.); +#475642 = DIRECTION('',(-0.999991214216,4.191836207642E-03,0.)); +#475643 = ORIENTED_EDGE('',*,*,#475644,.T.); +#475644 = EDGE_CURVE('',#475637,#475645,#475647,.T.); +#475645 = VERTEX_POINT('',#475646); +#475646 = CARTESIAN_POINT('',(153.420611,-123.655942,-7.5E-02)); +#475647 = LINE('',#475648,#475649); +#475648 = CARTESIAN_POINT('',(153.537336,-123.713546,-7.5E-02)); +#475649 = VECTOR('',#475650,1.); +#475650 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#475651 = ORIENTED_EDGE('',*,*,#475652,.T.); +#475652 = EDGE_CURVE('',#475645,#475653,#475655,.T.); +#475653 = VERTEX_POINT('',#475654); +#475654 = CARTESIAN_POINT('',(153.408649,-123.64053,-7.5E-02)); +#475655 = LINE('',#475656,#475657); +#475656 = CARTESIAN_POINT('',(153.420611,-123.655942,-7.5E-02)); +#475657 = VECTOR('',#475658,1.); +#475658 = DIRECTION('',(-0.613138319012,0.789975570356,0.)); +#475659 = ORIENTED_EDGE('',*,*,#475660,.T.); +#475660 = EDGE_CURVE('',#475653,#475661,#475663,.T.); +#475661 = VERTEX_POINT('',#475662); +#475662 = CARTESIAN_POINT('',(153.415598,-123.252076,-7.5E-02)); +#475663 = CIRCLE('',#475664,0.322687307627); +#475664 = AXIS2_PLACEMENT_3D('',#475665,#475666,#475667); +#475665 = CARTESIAN_POINT('',(153.66974659635,-123.450911584,-7.5E-02)); +#475666 = DIRECTION('',(0.,0.,-1.)); +#475667 = DIRECTION('',(-0.809135005275,-0.587622789924,-0.)); +#475668 = ORIENTED_EDGE('',*,*,#475669,.T.); +#475669 = EDGE_CURVE('',#475661,#475670,#475672,.T.); +#475670 = VERTEX_POINT('',#475671); +#475671 = CARTESIAN_POINT('',(153.436806,-123.237217,-7.5E-02)); +#475672 = LINE('',#475673,#475674); +#475673 = CARTESIAN_POINT('',(153.415598,-123.252076,-7.5E-02)); +#475674 = VECTOR('',#475675,1.); +#475675 = DIRECTION('',(0.818988741404,0.573809586407,0.)); +#475676 = ORIENTED_EDGE('',*,*,#475677,.T.); +#475677 = EDGE_CURVE('',#475670,#475678,#475680,.T.); +#475678 = VERTEX_POINT('',#475679); +#475679 = CARTESIAN_POINT('',(153.414752,-123.219822,-7.5E-02)); +#475680 = LINE('',#475681,#475682); +#475681 = CARTESIAN_POINT('',(153.436806,-123.237217,-7.5E-02)); +#475682 = VECTOR('',#475683,1.); +#475683 = DIRECTION('',(-0.78516063526,0.619292157901,0.)); +#475684 = ORIENTED_EDGE('',*,*,#475685,.T.); +#475685 = EDGE_CURVE('',#475678,#475686,#475688,.T.); +#475686 = VERTEX_POINT('',#475687); +#475687 = CARTESIAN_POINT('',(153.357994,-123.105632,-7.5E-02)); +#475688 = LINE('',#475689,#475690); +#475689 = CARTESIAN_POINT('',(153.414752,-123.219822,-7.5E-02)); +#475690 = VECTOR('',#475691,1.); +#475691 = DIRECTION('',(-0.44509813391,0.895481798358,0.)); +#475692 = ORIENTED_EDGE('',*,*,#475693,.T.); +#475693 = EDGE_CURVE('',#475686,#475694,#475696,.T.); +#475694 = VERTEX_POINT('',#475695); +#475695 = CARTESIAN_POINT('',(153.357994,-122.94023,-7.5E-02)); +#475696 = LINE('',#475697,#475698); +#475697 = CARTESIAN_POINT('',(153.357994,-123.105632,-7.5E-02)); +#475698 = VECTOR('',#475699,1.); +#475699 = DIRECTION('',(0.,1.,0.)); +#475700 = ORIENTED_EDGE('',*,*,#475701,.T.); +#475701 = EDGE_CURVE('',#475694,#475702,#475704,.T.); +#475702 = VERTEX_POINT('',#475703); +#475703 = CARTESIAN_POINT('',(153.397135,-122.856932,-7.5E-02)); +#475704 = LINE('',#475705,#475706); +#475705 = CARTESIAN_POINT('',(153.357994,-122.94023,-7.5E-02)); +#475706 = VECTOR('',#475707,1.); +#475707 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#475708 = ORIENTED_EDGE('',*,*,#475709,.T.); +#475709 = EDGE_CURVE('',#475702,#475494,#475710,.T.); +#475710 = LINE('',#475711,#475712); +#475711 = CARTESIAN_POINT('',(153.397135,-122.856932,-7.5E-02)); +#475712 = VECTOR('',#475713,1.); +#475713 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#475714 = PLANE('',#475715); +#475715 = AXIS2_PLACEMENT_3D('',#475716,#475717,#475718); +#475716 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475717 = DIRECTION('',(-0.,-0.,-1.)); +#475718 = DIRECTION('',(-1.,0.,0.)); +#475719 = SHELL_BASED_SURFACE_MODEL('',(#475720)); +#475720 = OPEN_SHELL('',(#475721)); +#475721 = ADVANCED_FACE('',(#475722),#475758,.T.); +#475722 = FACE_BOUND('',#475723,.T.); +#475723 = EDGE_LOOP('',(#475724,#475735,#475743,#475752)); +#475724 = ORIENTED_EDGE('',*,*,#475725,.T.); +#475725 = EDGE_CURVE('',#475726,#475728,#475730,.T.); +#475726 = VERTEX_POINT('',#475727); +#475727 = CARTESIAN_POINT('',(125.356359,-123.68,-7.5E-02)); +#475728 = VERTEX_POINT('',#475729); +#475729 = CARTESIAN_POINT('',(125.356359,-123.56,-7.5E-02)); +#475730 = CIRCLE('',#475731,6.000000000042E-02); +#475731 = AXIS2_PLACEMENT_3D('',#475732,#475733,#475734); +#475732 = CARTESIAN_POINT('',(125.35635877441,-123.62,-7.5E-02)); +#475733 = DIRECTION('',(0.,0.,-1.)); +#475734 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#475735 = ORIENTED_EDGE('',*,*,#475736,.T.); +#475736 = EDGE_CURVE('',#475728,#475737,#475739,.T.); +#475737 = VERTEX_POINT('',#475738); +#475738 = CARTESIAN_POINT('',(125.663641,-123.56,-7.5E-02)); +#475739 = LINE('',#475740,#475741); +#475740 = CARTESIAN_POINT('',(125.356359,-123.56,-7.5E-02)); +#475741 = VECTOR('',#475742,1.); +#475742 = DIRECTION('',(1.,0.,0.)); +#475743 = ORIENTED_EDGE('',*,*,#475744,.T.); +#475744 = EDGE_CURVE('',#475737,#475745,#475747,.T.); +#475745 = VERTEX_POINT('',#475746); +#475746 = CARTESIAN_POINT('',(125.663641,-123.68,-7.5E-02)); +#475747 = CIRCLE('',#475748,6.000000000042E-02); +#475748 = AXIS2_PLACEMENT_3D('',#475749,#475750,#475751); +#475749 = CARTESIAN_POINT('',(125.66364122558,-123.62,-7.5E-02)); +#475750 = DIRECTION('',(0.,0.,-1.)); +#475751 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#475752 = ORIENTED_EDGE('',*,*,#475753,.T.); +#475753 = EDGE_CURVE('',#475745,#475726,#475754,.T.); +#475754 = LINE('',#475755,#475756); +#475755 = CARTESIAN_POINT('',(125.663641,-123.68,-7.5E-02)); +#475756 = VECTOR('',#475757,1.); +#475757 = DIRECTION('',(-1.,0.,0.)); +#475758 = PLANE('',#475759); +#475759 = AXIS2_PLACEMENT_3D('',#475760,#475761,#475762); +#475760 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475761 = DIRECTION('',(-0.,-0.,-1.)); +#475762 = DIRECTION('',(-1.,0.,0.)); +#475763 = SHELL_BASED_SURFACE_MODEL('',(#475764)); +#475764 = OPEN_SHELL('',(#475765)); +#475765 = ADVANCED_FACE('',(#475766),#475802,.T.); +#475766 = FACE_BOUND('',#475767,.T.); +#475767 = EDGE_LOOP('',(#475768,#475779,#475787,#475796)); +#475768 = ORIENTED_EDGE('',*,*,#475769,.T.); +#475769 = EDGE_CURVE('',#475770,#475772,#475774,.T.); +#475770 = VERTEX_POINT('',#475771); +#475771 = CARTESIAN_POINT('',(137.446359,-123.24,-7.5E-02)); +#475772 = VERTEX_POINT('',#475773); +#475773 = CARTESIAN_POINT('',(137.446359,-123.12,-7.5E-02)); +#475774 = CIRCLE('',#475775,6.000000000042E-02); +#475775 = AXIS2_PLACEMENT_3D('',#475776,#475777,#475778); +#475776 = CARTESIAN_POINT('',(137.44635877441,-123.18,-7.5E-02)); +#475777 = DIRECTION('',(0.,0.,-1.)); +#475778 = DIRECTION('',(3.759794253685E-06,-0.999999999993,0.)); +#475779 = ORIENTED_EDGE('',*,*,#475780,.T.); +#475780 = EDGE_CURVE('',#475772,#475781,#475783,.T.); +#475781 = VERTEX_POINT('',#475782); +#475782 = CARTESIAN_POINT('',(137.753641,-123.12,-7.5E-02)); +#475783 = LINE('',#475784,#475785); +#475784 = CARTESIAN_POINT('',(137.446359,-123.12,-7.5E-02)); +#475785 = VECTOR('',#475786,1.); +#475786 = DIRECTION('',(1.,0.,0.)); +#475787 = ORIENTED_EDGE('',*,*,#475788,.T.); +#475788 = EDGE_CURVE('',#475781,#475789,#475791,.T.); +#475789 = VERTEX_POINT('',#475790); +#475790 = CARTESIAN_POINT('',(137.753641,-123.24,-7.5E-02)); +#475791 = CIRCLE('',#475792,6.000000000042E-02); +#475792 = AXIS2_PLACEMENT_3D('',#475793,#475794,#475795); +#475793 = CARTESIAN_POINT('',(137.75364122558,-123.18,-7.5E-02)); +#475794 = DIRECTION('',(0.,0.,-1.)); +#475795 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#475796 = ORIENTED_EDGE('',*,*,#475797,.T.); +#475797 = EDGE_CURVE('',#475789,#475770,#475798,.T.); +#475798 = LINE('',#475799,#475800); +#475799 = CARTESIAN_POINT('',(137.753641,-123.24,-7.5E-02)); +#475800 = VECTOR('',#475801,1.); +#475801 = DIRECTION('',(-1.,0.,0.)); +#475802 = PLANE('',#475803); +#475803 = AXIS2_PLACEMENT_3D('',#475804,#475805,#475806); +#475804 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475805 = DIRECTION('',(-0.,-0.,-1.)); +#475806 = DIRECTION('',(-1.,0.,0.)); +#475807 = SHELL_BASED_SURFACE_MODEL('',(#475808)); +#475808 = OPEN_SHELL('',(#475809)); +#475809 = ADVANCED_FACE('',(#475810),#475854,.T.); +#475810 = FACE_BOUND('',#475811,.T.); +#475811 = EDGE_LOOP('',(#475812,#475823,#475831,#475840,#475848)); +#475812 = ORIENTED_EDGE('',*,*,#475813,.T.); +#475813 = EDGE_CURVE('',#475814,#475816,#475818,.T.); +#475814 = VERTEX_POINT('',#475815); +#475815 = CARTESIAN_POINT('',(145.564567,-122.823398,-7.5E-02)); +#475816 = VERTEX_POINT('',#475817); +#475817 = CARTESIAN_POINT('',(145.68,-122.846359,-7.5E-02)); +#475818 = CIRCLE('',#475819,6.000007318647E-02); +#475819 = AXIS2_PLACEMENT_3D('',#475820,#475821,#475822); +#475820 = CARTESIAN_POINT('',(145.61999992681,-122.8463588233,-7.5E-02) + ); +#475821 = DIRECTION('',(0.,0.,-1.)); +#475822 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#475823 = ORIENTED_EDGE('',*,*,#475824,.T.); +#475824 = EDGE_CURVE('',#475816,#475825,#475827,.T.); +#475825 = VERTEX_POINT('',#475826); +#475826 = CARTESIAN_POINT('',(145.68,-123.153641,-7.5E-02)); +#475827 = LINE('',#475828,#475829); +#475828 = CARTESIAN_POINT('',(145.68,-122.846359,-7.5E-02)); +#475829 = VECTOR('',#475830,1.); +#475830 = DIRECTION('',(0.,-1.,0.)); +#475831 = ORIENTED_EDGE('',*,*,#475832,.T.); +#475832 = EDGE_CURVE('',#475825,#475833,#475835,.T.); +#475833 = VERTEX_POINT('',#475834); +#475834 = CARTESIAN_POINT('',(145.56,-123.153641,-7.5E-02)); +#475835 = CIRCLE('',#475836,6.000000000043E-02); +#475836 = AXIS2_PLACEMENT_3D('',#475837,#475838,#475839); +#475837 = CARTESIAN_POINT('',(145.62,-123.1536412255,-7.5E-02)); +#475838 = DIRECTION('',(0.,0.,-1.)); +#475839 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#475840 = ORIENTED_EDGE('',*,*,#475841,.T.); +#475841 = EDGE_CURVE('',#475833,#475842,#475844,.T.); +#475842 = VERTEX_POINT('',#475843); +#475843 = CARTESIAN_POINT('',(145.56,-122.846359,-7.5E-02)); +#475844 = LINE('',#475845,#475846); +#475845 = CARTESIAN_POINT('',(145.56,-123.153641,-7.5E-02)); +#475846 = VECTOR('',#475847,1.); +#475847 = DIRECTION('',(0.,1.,0.)); +#475848 = ORIENTED_EDGE('',*,*,#475849,.T.); +#475849 = EDGE_CURVE('',#475842,#475814,#475850,.T.); +#475850 = LINE('',#475851,#475852); +#475851 = CARTESIAN_POINT('',(145.56,-122.846359,-7.5E-02)); +#475852 = VECTOR('',#475853,1.); +#475853 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#475854 = PLANE('',#475855); +#475855 = AXIS2_PLACEMENT_3D('',#475856,#475857,#475858); +#475856 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475857 = DIRECTION('',(-0.,-0.,-1.)); +#475858 = DIRECTION('',(-1.,0.,0.)); +#475859 = SHELL_BASED_SURFACE_MODEL('',(#475860)); +#475860 = OPEN_SHELL('',(#475861)); +#475861 = ADVANCED_FACE('',(#475862),#475906,.T.); +#475862 = FACE_BOUND('',#475863,.T.); +#475863 = EDGE_LOOP('',(#475864,#475875,#475883,#475892,#475900)); +#475864 = ORIENTED_EDGE('',*,*,#475865,.T.); +#475865 = EDGE_CURVE('',#475866,#475868,#475870,.T.); +#475866 = VERTEX_POINT('',#475867); +#475867 = CARTESIAN_POINT('',(146.324567,-122.823398,-7.5E-02)); +#475868 = VERTEX_POINT('',#475869); +#475869 = CARTESIAN_POINT('',(146.44,-122.846359,-7.5E-02)); +#475870 = CIRCLE('',#475871,6.000007318647E-02); +#475871 = AXIS2_PLACEMENT_3D('',#475872,#475873,#475874); +#475872 = CARTESIAN_POINT('',(146.37999992681,-122.8463588233,-7.5E-02) + ); +#475873 = DIRECTION('',(0.,0.,-1.)); +#475874 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#475875 = ORIENTED_EDGE('',*,*,#475876,.T.); +#475876 = EDGE_CURVE('',#475868,#475877,#475879,.T.); +#475877 = VERTEX_POINT('',#475878); +#475878 = CARTESIAN_POINT('',(146.44,-123.153641,-7.5E-02)); +#475879 = LINE('',#475880,#475881); +#475880 = CARTESIAN_POINT('',(146.44,-122.846359,-7.5E-02)); +#475881 = VECTOR('',#475882,1.); +#475882 = DIRECTION('',(0.,-1.,0.)); +#475883 = ORIENTED_EDGE('',*,*,#475884,.T.); +#475884 = EDGE_CURVE('',#475877,#475885,#475887,.T.); +#475885 = VERTEX_POINT('',#475886); +#475886 = CARTESIAN_POINT('',(146.32,-123.153641,-7.5E-02)); +#475887 = CIRCLE('',#475888,6.000000000043E-02); +#475888 = AXIS2_PLACEMENT_3D('',#475889,#475890,#475891); +#475889 = CARTESIAN_POINT('',(146.38,-123.1536412255,-7.5E-02)); +#475890 = DIRECTION('',(0.,0.,-1.)); +#475891 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#475892 = ORIENTED_EDGE('',*,*,#475893,.T.); +#475893 = EDGE_CURVE('',#475885,#475894,#475896,.T.); +#475894 = VERTEX_POINT('',#475895); +#475895 = CARTESIAN_POINT('',(146.32,-122.846359,-7.5E-02)); +#475896 = LINE('',#475897,#475898); +#475897 = CARTESIAN_POINT('',(146.32,-123.153641,-7.5E-02)); +#475898 = VECTOR('',#475899,1.); +#475899 = DIRECTION('',(0.,1.,0.)); +#475900 = ORIENTED_EDGE('',*,*,#475901,.T.); +#475901 = EDGE_CURVE('',#475894,#475866,#475902,.T.); +#475902 = LINE('',#475903,#475904); +#475903 = CARTESIAN_POINT('',(146.32,-122.846359,-7.5E-02)); +#475904 = VECTOR('',#475905,1.); +#475905 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#475906 = PLANE('',#475907); +#475907 = AXIS2_PLACEMENT_3D('',#475908,#475909,#475910); +#475908 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#475909 = DIRECTION('',(-0.,-0.,-1.)); +#475910 = DIRECTION('',(-1.,0.,0.)); +#475911 = SHELL_BASED_SURFACE_MODEL('',(#475912)); +#475912 = OPEN_SHELL('',(#475913)); +#475913 = ADVANCED_FACE('',(#475914),#476063,.T.); +#475914 = FACE_BOUND('',#475915,.T.); +#475915 = EDGE_LOOP('',(#475916,#475927,#475935,#475944,#475952,#475960, + #475968,#475976,#475984,#475992,#476000,#476009,#476017,#476025, + #476033,#476041,#476049,#476057)); +#475916 = ORIENTED_EDGE('',*,*,#475917,.T.); +#475917 = EDGE_CURVE('',#475918,#475920,#475922,.T.); +#475918 = VERTEX_POINT('',#475919); +#475919 = CARTESIAN_POINT('',(151.776674,-122.664364,-7.5E-02)); +#475920 = VERTEX_POINT('',#475921); +#475921 = CARTESIAN_POINT('',(151.795808,-122.56817,-7.5E-02)); +#475922 = CIRCLE('',#475923,4.99999845211E-02); +#475923 = AXIS2_PLACEMENT_3D('',#475924,#475925,#475926); +#475924 = CARTESIAN_POINT('',(151.79580803736,-122.6181699845,-7.5E-02) + ); +#475925 = DIRECTION('',(0.,0.,-1.)); +#475926 = DIRECTION('',(-0.382680865851,-0.923880595592,-0.)); +#475927 = ORIENTED_EDGE('',*,*,#475928,.T.); +#475928 = EDGE_CURVE('',#475920,#475929,#475931,.T.); +#475929 = VERTEX_POINT('',#475930); +#475930 = CARTESIAN_POINT('',(152.462475,-122.56817,-7.5E-02)); +#475931 = LINE('',#475932,#475933); +#475932 = CARTESIAN_POINT('',(151.795808,-122.56817,-7.5E-02)); +#475933 = VECTOR('',#475934,1.); +#475934 = DIRECTION('',(1.,0.,0.)); +#475935 = ORIENTED_EDGE('',*,*,#475936,.T.); +#475936 = EDGE_CURVE('',#475929,#475937,#475939,.T.); +#475937 = VERTEX_POINT('',#475938); +#475938 = CARTESIAN_POINT('',(152.462475,-122.66817,-7.5E-02)); +#475939 = CIRCLE('',#475940,5.000000000003E-02); +#475940 = AXIS2_PLACEMENT_3D('',#475941,#475942,#475943); +#475941 = CARTESIAN_POINT('',(152.46247495228,-122.61817,-7.5E-02)); +#475942 = DIRECTION('',(0.,0.,-1.)); +#475943 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#475944 = ORIENTED_EDGE('',*,*,#475945,.T.); +#475945 = EDGE_CURVE('',#475937,#475946,#475948,.T.); +#475946 = VERTEX_POINT('',#475947); +#475947 = CARTESIAN_POINT('',(151.911757,-122.66817,-7.5E-02)); +#475948 = LINE('',#475949,#475950); +#475949 = CARTESIAN_POINT('',(152.462475,-122.66817,-7.5E-02)); +#475950 = VECTOR('',#475951,1.); +#475951 = DIRECTION('',(-1.,0.,0.)); +#475952 = ORIENTED_EDGE('',*,*,#475953,.T.); +#475953 = EDGE_CURVE('',#475946,#475954,#475956,.T.); +#475954 = VERTEX_POINT('',#475955); +#475955 = CARTESIAN_POINT('',(151.884519,-122.695406,-7.5E-02)); +#475956 = LINE('',#475957,#475958); +#475957 = CARTESIAN_POINT('',(151.911757,-122.66817,-7.5E-02)); +#475958 = VECTOR('',#475959,1.); +#475959 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#475960 = ORIENTED_EDGE('',*,*,#475961,.T.); +#475961 = EDGE_CURVE('',#475954,#475962,#475964,.T.); +#475962 = VERTEX_POINT('',#475963); +#475963 = CARTESIAN_POINT('',(151.845808,-122.77283,-7.5E-02)); +#475964 = LINE('',#475965,#475966); +#475965 = CARTESIAN_POINT('',(151.884519,-122.695406,-7.5E-02)); +#475966 = VECTOR('',#475967,1.); +#475967 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#475968 = ORIENTED_EDGE('',*,*,#475969,.T.); +#475969 = EDGE_CURVE('',#475962,#475970,#475972,.T.); +#475970 = VERTEX_POINT('',#475971); +#475971 = CARTESIAN_POINT('',(151.845808,-122.892081,-7.5E-02)); +#475972 = LINE('',#475973,#475974); +#475973 = CARTESIAN_POINT('',(151.845808,-122.77283,-7.5E-02)); +#475974 = VECTOR('',#475975,1.); +#475975 = DIRECTION('',(0.,-1.,0.)); +#475976 = ORIENTED_EDGE('',*,*,#475977,.T.); +#475977 = EDGE_CURVE('',#475970,#475978,#475980,.T.); +#475978 = VERTEX_POINT('',#475979); +#475979 = CARTESIAN_POINT('',(151.880694,-122.961854,-7.5E-02)); +#475980 = LINE('',#475981,#475982); +#475981 = CARTESIAN_POINT('',(151.845808,-122.892081,-7.5E-02)); +#475982 = VECTOR('',#475983,1.); +#475983 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#475984 = ORIENTED_EDGE('',*,*,#475985,.T.); +#475985 = EDGE_CURVE('',#475978,#475986,#475988,.T.); +#475986 = VERTEX_POINT('',#475987); +#475987 = CARTESIAN_POINT('',(151.950469,-122.996741,-7.5E-02)); +#475988 = LINE('',#475989,#475990); +#475989 = CARTESIAN_POINT('',(151.880694,-122.961854,-7.5E-02)); +#475990 = VECTOR('',#475991,1.); +#475991 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#475992 = ORIENTED_EDGE('',*,*,#475993,.T.); +#475993 = EDGE_CURVE('',#475986,#475994,#475996,.T.); +#475994 = VERTEX_POINT('',#475995); +#475995 = CARTESIAN_POINT('',(152.462475,-122.996741,-7.5E-02)); +#475996 = LINE('',#475997,#475998); +#475997 = CARTESIAN_POINT('',(151.950469,-122.996741,-7.5E-02)); +#475998 = VECTOR('',#475999,1.); +#475999 = DIRECTION('',(1.,0.,0.)); +#476000 = ORIENTED_EDGE('',*,*,#476001,.T.); +#476001 = EDGE_CURVE('',#475994,#476002,#476004,.T.); +#476002 = VERTEX_POINT('',#476003); +#476003 = CARTESIAN_POINT('',(152.462475,-123.096741,-7.5E-02)); +#476004 = CIRCLE('',#476005,5.000000000003E-02); +#476005 = AXIS2_PLACEMENT_3D('',#476006,#476007,#476008); +#476006 = CARTESIAN_POINT('',(152.46247495228,-123.046741,-7.5E-02)); +#476007 = DIRECTION('',(0.,0.,-1.)); +#476008 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#476009 = ORIENTED_EDGE('',*,*,#476010,.T.); +#476010 = EDGE_CURVE('',#476002,#476011,#476013,.T.); +#476011 = VERTEX_POINT('',#476012); +#476012 = CARTESIAN_POINT('',(151.927392,-123.094498,-7.5E-02)); +#476013 = LINE('',#476014,#476015); +#476014 = CARTESIAN_POINT('',(152.462475,-123.096741,-7.5E-02)); +#476015 = VECTOR('',#476016,1.); +#476016 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#476017 = ORIENTED_EDGE('',*,*,#476018,.T.); +#476018 = EDGE_CURVE('',#476011,#476019,#476021,.T.); +#476019 = VERTEX_POINT('',#476020); +#476020 = CARTESIAN_POINT('',(151.810667,-123.036894,-7.5E-02)); +#476021 = LINE('',#476022,#476023); +#476022 = CARTESIAN_POINT('',(151.927392,-123.094498,-7.5E-02)); +#476023 = VECTOR('',#476024,1.); +#476024 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#476025 = ORIENTED_EDGE('',*,*,#476026,.T.); +#476026 = EDGE_CURVE('',#476019,#476027,#476029,.T.); +#476027 = VERTEX_POINT('',#476028); +#476028 = CARTESIAN_POINT('',(151.798705,-123.021482,-7.5E-02)); +#476029 = LINE('',#476030,#476031); +#476030 = CARTESIAN_POINT('',(151.810667,-123.036894,-7.5E-02)); +#476031 = VECTOR('',#476032,1.); +#476032 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#476033 = ORIENTED_EDGE('',*,*,#476034,.T.); +#476034 = EDGE_CURVE('',#476027,#476035,#476037,.T.); +#476035 = VERTEX_POINT('',#476036); +#476036 = CARTESIAN_POINT('',(151.74805,-122.915156,-7.5E-02)); +#476037 = LINE('',#476038,#476039); +#476038 = CARTESIAN_POINT('',(151.798705,-123.021482,-7.5E-02)); +#476039 = VECTOR('',#476040,1.); +#476040 = DIRECTION('',(-0.430096717347,0.902782816478,0.)); +#476041 = ORIENTED_EDGE('',*,*,#476042,.T.); +#476042 = EDGE_CURVE('',#476035,#476043,#476045,.T.); +#476043 = VERTEX_POINT('',#476044); +#476044 = CARTESIAN_POINT('',(151.74805,-122.749754,-7.5E-02)); +#476045 = LINE('',#476046,#476047); +#476046 = CARTESIAN_POINT('',(151.74805,-122.915156,-7.5E-02)); +#476047 = VECTOR('',#476048,1.); +#476048 = DIRECTION('',(0.,1.,0.)); +#476049 = ORIENTED_EDGE('',*,*,#476050,.T.); +#476050 = EDGE_CURVE('',#476043,#476051,#476053,.T.); +#476051 = VERTEX_POINT('',#476052); +#476052 = CARTESIAN_POINT('',(151.787191,-122.666456,-7.5E-02)); +#476053 = LINE('',#476054,#476055); +#476054 = CARTESIAN_POINT('',(151.74805,-122.749754,-7.5E-02)); +#476055 = VECTOR('',#476056,1.); +#476056 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#476057 = ORIENTED_EDGE('',*,*,#476058,.T.); +#476058 = EDGE_CURVE('',#476051,#475918,#476059,.T.); +#476059 = LINE('',#476060,#476061); +#476060 = CARTESIAN_POINT('',(151.787191,-122.666456,-7.5E-02)); +#476061 = VECTOR('',#476062,1.); +#476062 = DIRECTION('',(-0.980784591044,0.195093787625,0.)); +#476063 = PLANE('',#476064); +#476064 = AXIS2_PLACEMENT_3D('',#476065,#476066,#476067); +#476065 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476066 = DIRECTION('',(-0.,-0.,-1.)); +#476067 = DIRECTION('',(-1.,0.,0.)); +#476068 = SHELL_BASED_SURFACE_MODEL('',(#476069)); +#476069 = OPEN_SHELL('',(#476070)); +#476070 = ADVANCED_FACE('',(#476071),#476107,.T.); +#476071 = FACE_BOUND('',#476072,.T.); +#476072 = EDGE_LOOP('',(#476073,#476084,#476092,#476101)); +#476073 = ORIENTED_EDGE('',*,*,#476074,.T.); +#476074 = EDGE_CURVE('',#476075,#476077,#476079,.T.); +#476075 = VERTEX_POINT('',#476076); +#476076 = CARTESIAN_POINT('',(125.356359,-122.94,-7.5E-02)); +#476077 = VERTEX_POINT('',#476078); +#476078 = CARTESIAN_POINT('',(125.356359,-122.82,-7.5E-02)); +#476079 = CIRCLE('',#476080,6.000000000043E-02); +#476080 = AXIS2_PLACEMENT_3D('',#476081,#476082,#476083); +#476081 = CARTESIAN_POINT('',(125.35635877441,-122.88,-7.5E-02)); +#476082 = DIRECTION('',(0.,0.,-1.)); +#476083 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#476084 = ORIENTED_EDGE('',*,*,#476085,.T.); +#476085 = EDGE_CURVE('',#476077,#476086,#476088,.T.); +#476086 = VERTEX_POINT('',#476087); +#476087 = CARTESIAN_POINT('',(125.663641,-122.82,-7.5E-02)); +#476088 = LINE('',#476089,#476090); +#476089 = CARTESIAN_POINT('',(125.356359,-122.82,-7.5E-02)); +#476090 = VECTOR('',#476091,1.); +#476091 = DIRECTION('',(1.,0.,0.)); +#476092 = ORIENTED_EDGE('',*,*,#476093,.T.); +#476093 = EDGE_CURVE('',#476086,#476094,#476096,.T.); +#476094 = VERTEX_POINT('',#476095); +#476095 = CARTESIAN_POINT('',(125.663641,-122.94,-7.5E-02)); +#476096 = CIRCLE('',#476097,6.000000000042E-02); +#476097 = AXIS2_PLACEMENT_3D('',#476098,#476099,#476100); +#476098 = CARTESIAN_POINT('',(125.66364122558,-122.88,-7.5E-02)); +#476099 = DIRECTION('',(0.,0.,-1.)); +#476100 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#476101 = ORIENTED_EDGE('',*,*,#476102,.T.); +#476102 = EDGE_CURVE('',#476094,#476075,#476103,.T.); +#476103 = LINE('',#476104,#476105); +#476104 = CARTESIAN_POINT('',(125.663641,-122.94,-7.5E-02)); +#476105 = VECTOR('',#476106,1.); +#476106 = DIRECTION('',(-1.,0.,0.)); +#476107 = PLANE('',#476108); +#476108 = AXIS2_PLACEMENT_3D('',#476109,#476110,#476111); +#476109 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476110 = DIRECTION('',(-0.,-0.,-1.)); +#476111 = DIRECTION('',(-1.,0.,0.)); +#476112 = SHELL_BASED_SURFACE_MODEL('',(#476113)); +#476113 = OPEN_SHELL('',(#476114)); +#476114 = ADVANCED_FACE('',(#476115),#476209,.T.); +#476115 = FACE_BOUND('',#476116,.T.); +#476116 = EDGE_LOOP('',(#476117,#476128,#476136,#476145,#476153,#476162, + #476170,#476179,#476187,#476195,#476203)); +#476117 = ORIENTED_EDGE('',*,*,#476118,.T.); +#476118 = EDGE_CURVE('',#476119,#476121,#476123,.T.); +#476119 = VERTEX_POINT('',#476120); +#476120 = CARTESIAN_POINT('',(150.142067,-121.487039,-7.5E-02)); +#476121 = VERTEX_POINT('',#476122); +#476122 = CARTESIAN_POINT('',(150.2575,-121.51,-7.5E-02)); +#476123 = CIRCLE('',#476124,6.000007318647E-02); +#476124 = AXIS2_PLACEMENT_3D('',#476125,#476126,#476127); +#476125 = CARTESIAN_POINT('',(150.19749992681,-121.5099998233,-7.5E-02) + ); +#476126 = DIRECTION('',(0.,0.,-1.)); +#476127 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#476128 = ORIENTED_EDGE('',*,*,#476129,.T.); +#476129 = EDGE_CURVE('',#476121,#476130,#476132,.T.); +#476130 = VERTEX_POINT('',#476131); +#476131 = CARTESIAN_POINT('',(150.2575,-122.51,-7.5E-02)); +#476132 = LINE('',#476133,#476134); +#476133 = CARTESIAN_POINT('',(150.2575,-121.51,-7.5E-02)); +#476134 = VECTOR('',#476135,1.); +#476135 = DIRECTION('',(0.,-1.,0.)); +#476136 = ORIENTED_EDGE('',*,*,#476137,.T.); +#476137 = EDGE_CURVE('',#476130,#476138,#476140,.T.); +#476138 = VERTEX_POINT('',#476139); +#476139 = CARTESIAN_POINT('',(150.1975,-122.57,-7.5E-02)); +#476140 = CIRCLE('',#476141,5.999932016256E-02); +#476141 = AXIS2_PLACEMENT_3D('',#476142,#476143,#476144); +#476142 = CARTESIAN_POINT('',(150.19750067984,-122.5100006798,-7.5E-02) + ); +#476143 = DIRECTION('',(0.,0.,-1.)); +#476144 = DIRECTION('',(0.999999999936,1.133081659513E-05,0.)); +#476145 = ORIENTED_EDGE('',*,*,#476146,.T.); +#476146 = EDGE_CURVE('',#476138,#476147,#476149,.T.); +#476147 = VERTEX_POINT('',#476148); +#476148 = CARTESIAN_POINT('',(148.6775,-122.57,-7.5E-02)); +#476149 = LINE('',#476150,#476151); +#476150 = CARTESIAN_POINT('',(150.1975,-122.57,-7.5E-02)); +#476151 = VECTOR('',#476152,1.); +#476152 = DIRECTION('',(-1.,0.,0.)); +#476153 = ORIENTED_EDGE('',*,*,#476154,.T.); +#476154 = EDGE_CURVE('',#476147,#476155,#476157,.T.); +#476155 = VERTEX_POINT('',#476156); +#476156 = CARTESIAN_POINT('',(148.6175,-122.51,-7.5E-02)); +#476157 = CIRCLE('',#476158,5.999932016257E-02); +#476158 = AXIS2_PLACEMENT_3D('',#476159,#476160,#476161); +#476159 = CARTESIAN_POINT('',(148.67749932015,-122.5100006798,-7.5E-02) + ); +#476160 = DIRECTION('',(0.,0.,-1.)); +#476161 = DIRECTION('',(1.133081659513E-05,-0.999999999936,0.)); +#476162 = ORIENTED_EDGE('',*,*,#476163,.T.); +#476163 = EDGE_CURVE('',#476155,#476164,#476166,.T.); +#476164 = VERTEX_POINT('',#476165); +#476165 = CARTESIAN_POINT('',(148.6175,-122.46,-7.5E-02)); +#476166 = LINE('',#476167,#476168); +#476167 = CARTESIAN_POINT('',(148.6175,-122.51,-7.5E-02)); +#476168 = VECTOR('',#476169,1.); +#476169 = DIRECTION('',(0.,1.,0.)); +#476170 = ORIENTED_EDGE('',*,*,#476171,.T.); +#476171 = EDGE_CURVE('',#476164,#476172,#476174,.T.); +#476172 = VERTEX_POINT('',#476173); +#476173 = CARTESIAN_POINT('',(148.732933,-122.437039,-7.5E-02)); +#476174 = CIRCLE('',#476175,6.000007318647E-02); +#476175 = AXIS2_PLACEMENT_3D('',#476176,#476177,#476178); +#476176 = CARTESIAN_POINT('',(148.67750007318,-122.4599998233,-7.5E-02) + ); +#476177 = DIRECTION('',(0.,0.,-1.)); +#476178 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#476179 = ORIENTED_EDGE('',*,*,#476180,.T.); +#476180 = EDGE_CURVE('',#476172,#476181,#476183,.T.); +#476181 = VERTEX_POINT('',#476182); +#476182 = CARTESIAN_POINT('',(148.735511,-122.45,-7.5E-02)); +#476183 = LINE('',#476184,#476185); +#476184 = CARTESIAN_POINT('',(148.732933,-122.437039,-7.5E-02)); +#476185 = VECTOR('',#476186,1.); +#476186 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#476187 = ORIENTED_EDGE('',*,*,#476188,.T.); +#476188 = EDGE_CURVE('',#476181,#476189,#476191,.T.); +#476189 = VERTEX_POINT('',#476190); +#476190 = CARTESIAN_POINT('',(150.1375,-122.45,-7.5E-02)); +#476191 = LINE('',#476192,#476193); +#476192 = CARTESIAN_POINT('',(148.735511,-122.45,-7.5E-02)); +#476193 = VECTOR('',#476194,1.); +#476194 = DIRECTION('',(1.,0.,0.)); +#476195 = ORIENTED_EDGE('',*,*,#476196,.T.); +#476196 = EDGE_CURVE('',#476189,#476197,#476199,.T.); +#476197 = VERTEX_POINT('',#476198); +#476198 = CARTESIAN_POINT('',(150.1375,-121.51,-7.5E-02)); +#476199 = LINE('',#476200,#476201); +#476200 = CARTESIAN_POINT('',(150.1375,-122.45,-7.5E-02)); +#476201 = VECTOR('',#476202,1.); +#476202 = DIRECTION('',(0.,1.,0.)); +#476203 = ORIENTED_EDGE('',*,*,#476204,.T.); +#476204 = EDGE_CURVE('',#476197,#476119,#476205,.T.); +#476205 = LINE('',#476206,#476207); +#476206 = CARTESIAN_POINT('',(150.1375,-121.51,-7.5E-02)); +#476207 = VECTOR('',#476208,1.); +#476208 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#476209 = PLANE('',#476210); +#476210 = AXIS2_PLACEMENT_3D('',#476211,#476212,#476213); +#476211 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476212 = DIRECTION('',(-0.,-0.,-1.)); +#476213 = DIRECTION('',(-1.,0.,0.)); +#476214 = SHELL_BASED_SURFACE_MODEL('',(#476215)); +#476215 = OPEN_SHELL('',(#476216)); +#476216 = ADVANCED_FACE('',(#476217),#476253,.T.); +#476217 = FACE_BOUND('',#476218,.T.); +#476218 = EDGE_LOOP('',(#476219,#476230,#476238,#476247)); +#476219 = ORIENTED_EDGE('',*,*,#476220,.T.); +#476220 = EDGE_CURVE('',#476221,#476223,#476225,.T.); +#476221 = VERTEX_POINT('',#476222); +#476222 = CARTESIAN_POINT('',(137.446359,-122.48,-7.5E-02)); +#476223 = VERTEX_POINT('',#476224); +#476224 = CARTESIAN_POINT('',(137.446359,-122.36,-7.5E-02)); +#476225 = CIRCLE('',#476226,6.000000000043E-02); +#476226 = AXIS2_PLACEMENT_3D('',#476227,#476228,#476229); +#476227 = CARTESIAN_POINT('',(137.44635877441,-122.42,-7.5E-02)); +#476228 = DIRECTION('',(0.,0.,-1.)); +#476229 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#476230 = ORIENTED_EDGE('',*,*,#476231,.T.); +#476231 = EDGE_CURVE('',#476223,#476232,#476234,.T.); +#476232 = VERTEX_POINT('',#476233); +#476233 = CARTESIAN_POINT('',(137.753641,-122.36,-7.5E-02)); +#476234 = LINE('',#476235,#476236); +#476235 = CARTESIAN_POINT('',(137.446359,-122.36,-7.5E-02)); +#476236 = VECTOR('',#476237,1.); +#476237 = DIRECTION('',(1.,0.,0.)); +#476238 = ORIENTED_EDGE('',*,*,#476239,.T.); +#476239 = EDGE_CURVE('',#476232,#476240,#476242,.T.); +#476240 = VERTEX_POINT('',#476241); +#476241 = CARTESIAN_POINT('',(137.753641,-122.48,-7.5E-02)); +#476242 = CIRCLE('',#476243,6.000000000042E-02); +#476243 = AXIS2_PLACEMENT_3D('',#476244,#476245,#476246); +#476244 = CARTESIAN_POINT('',(137.75364122558,-122.42,-7.5E-02)); +#476245 = DIRECTION('',(0.,0.,-1.)); +#476246 = DIRECTION('',(-3.759794727378E-06,0.999999999993,-0.)); +#476247 = ORIENTED_EDGE('',*,*,#476248,.T.); +#476248 = EDGE_CURVE('',#476240,#476221,#476249,.T.); +#476249 = LINE('',#476250,#476251); +#476250 = CARTESIAN_POINT('',(137.753641,-122.48,-7.5E-02)); +#476251 = VECTOR('',#476252,1.); +#476252 = DIRECTION('',(-1.,0.,0.)); +#476253 = PLANE('',#476254); +#476254 = AXIS2_PLACEMENT_3D('',#476255,#476256,#476257); +#476255 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476256 = DIRECTION('',(-0.,-0.,-1.)); +#476257 = DIRECTION('',(-1.,0.,0.)); +#476258 = SHELL_BASED_SURFACE_MODEL('',(#476259)); +#476259 = OPEN_SHELL('',(#476260)); +#476260 = ADVANCED_FACE('',(#476261,#476338),#476415,.T.); +#476261 = FACE_BOUND('',#476262,.T.); +#476262 = EDGE_LOOP('',(#476263,#476274,#476282,#476290,#476298,#476307, + #476315,#476323,#476332)); +#476263 = ORIENTED_EDGE('',*,*,#476264,.T.); +#476264 = EDGE_CURVE('',#476265,#476267,#476269,.T.); +#476265 = VERTEX_POINT('',#476266); +#476266 = CARTESIAN_POINT('',(153.408649,-122.307196,-7.5E-02)); +#476267 = VERTEX_POINT('',#476268); +#476268 = CARTESIAN_POINT('',(153.584955,-121.808507,-7.5E-02)); +#476269 = CIRCLE('',#476270,0.320678184363); +#476270 = AXIS2_PLACEMENT_3D('',#476271,#476272,#476273); +#476271 = CARTESIAN_POINT('',(153.66778910741,-122.1183021074,-7.5E-02) + ); +#476272 = DIRECTION('',(0.,0.,-1.)); +#476273 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#476274 = ORIENTED_EDGE('',*,*,#476275,.T.); +#476275 = EDGE_CURVE('',#476267,#476276,#476278,.T.); +#476276 = VERTEX_POINT('',#476277); +#476277 = CARTESIAN_POINT('',(153.884398,-121.806753,-7.5E-02)); +#476278 = LINE('',#476279,#476280); +#476279 = CARTESIAN_POINT('',(153.584955,-121.808507,-7.5E-02)); +#476280 = VECTOR('',#476281,1.); +#476281 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#476282 = ORIENTED_EDGE('',*,*,#476283,.T.); +#476283 = EDGE_CURVE('',#476276,#476284,#476286,.T.); +#476284 = VERTEX_POINT('',#476285); +#476285 = CARTESIAN_POINT('',(153.904303,-121.811544,-7.5E-02)); +#476286 = LINE('',#476287,#476288); +#476287 = CARTESIAN_POINT('',(153.884398,-121.806753,-7.5E-02)); +#476288 = VECTOR('',#476289,1.); +#476289 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#476290 = ORIENTED_EDGE('',*,*,#476291,.T.); +#476291 = EDGE_CURVE('',#476284,#476292,#476294,.T.); +#476292 = VERTEX_POINT('',#476293); +#476293 = CARTESIAN_POINT('',(154.012535,-121.868528,-7.5E-02)); +#476294 = LINE('',#476295,#476296); +#476295 = CARTESIAN_POINT('',(153.904303,-121.811544,-7.5E-02)); +#476296 = VECTOR('',#476297,1.); +#476297 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#476298 = ORIENTED_EDGE('',*,*,#476299,.T.); +#476299 = EDGE_CURVE('',#476292,#476300,#476302,.T.); +#476300 = VERTEX_POINT('',#476301); +#476301 = CARTESIAN_POINT('',(154.120176,-122.20087,-7.5E-02)); +#476302 = CIRCLE('',#476303,0.323553911777); +#476303 = AXIS2_PLACEMENT_3D('',#476304,#476305,#476306); +#476304 = CARTESIAN_POINT('',(153.80725115022,-122.118619333,-7.5E-02)); +#476305 = DIRECTION('',(0.,0.,-1.)); +#476306 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#476307 = ORIENTED_EDGE('',*,*,#476308,.T.); +#476308 = EDGE_CURVE('',#476300,#476309,#476311,.T.); +#476309 = VERTEX_POINT('',#476310); +#476310 = CARTESIAN_POINT('',(154.060155,-122.320192,-7.5E-02)); +#476311 = LINE('',#476312,#476313); +#476312 = CARTESIAN_POINT('',(154.120176,-122.20087,-7.5E-02)); +#476313 = VECTOR('',#476314,1.); +#476314 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#476315 = ORIENTED_EDGE('',*,*,#476316,.T.); +#476316 = EDGE_CURVE('',#476309,#476317,#476319,.T.); +#476317 = VERTEX_POINT('',#476318); +#476318 = CARTESIAN_POINT('',(153.99954,-122.377177,-7.5E-02)); +#476319 = LINE('',#476320,#476321); +#476320 = CARTESIAN_POINT('',(154.060155,-122.320192,-7.5E-02)); +#476321 = VECTOR('',#476322,1.); +#476322 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#476323 = ORIENTED_EDGE('',*,*,#476324,.T.); +#476324 = EDGE_CURVE('',#476317,#476325,#476327,.T.); +#476325 = VERTEX_POINT('',#476326); +#476326 = CARTESIAN_POINT('',(153.465634,-122.36781,-7.5E-02)); +#476327 = CIRCLE('',#476328,0.484201554455); +#476328 = AXIS2_PLACEMENT_3D('',#476329,#476330,#476331); +#476329 = CARTESIAN_POINT('',(153.73967270064,-121.968618397,-7.5E-02)); +#476330 = DIRECTION('',(-0.,0.,-1.)); +#476331 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#476332 = ORIENTED_EDGE('',*,*,#476333,.T.); +#476333 = EDGE_CURVE('',#476325,#476265,#476334,.T.); +#476334 = LINE('',#476335,#476336); +#476335 = CARTESIAN_POINT('',(153.465634,-122.36781,-7.5E-02)); +#476336 = VECTOR('',#476337,1.); +#476337 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#476338 = FACE_BOUND('',#476339,.T.); +#476339 = EDGE_LOOP('',(#476340,#476351,#476359,#476368,#476376,#476384, + #476393,#476401,#476409)); +#476340 = ORIENTED_EDGE('',*,*,#476341,.T.); +#476341 = EDGE_CURVE('',#476342,#476344,#476346,.T.); +#476342 = VERTEX_POINT('',#476343); +#476343 = CARTESIAN_POINT('',(153.947561,-121.944976,-7.5E-02)); +#476344 = VERTEX_POINT('',#476345); +#476345 = CARTESIAN_POINT('',(153.530608,-121.944976,-7.5E-02)); +#476346 = CIRCLE('',#476347,0.382072162856); +#476347 = AXIS2_PLACEMENT_3D('',#476348,#476349,#476350); +#476348 = CARTESIAN_POINT('',(153.7390845,-122.2651582708,-7.5E-02)); +#476349 = DIRECTION('',(0.,0.,1.)); +#476350 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#476351 = ORIENTED_EDGE('',*,*,#476352,.T.); +#476352 = EDGE_CURVE('',#476344,#476353,#476355,.T.); +#476353 = VERTEX_POINT('',#476354); +#476354 = CARTESIAN_POINT('',(153.494463,-121.98112,-7.5E-02)); +#476355 = LINE('',#476356,#476357); +#476356 = CARTESIAN_POINT('',(153.530608,-121.944976,-7.5E-02)); +#476357 = VECTOR('',#476358,1.); +#476358 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#476359 = ORIENTED_EDGE('',*,*,#476360,.T.); +#476360 = EDGE_CURVE('',#476353,#476361,#476363,.T.); +#476361 = VERTEX_POINT('',#476362); +#476362 = CARTESIAN_POINT('',(153.530608,-122.291362,-7.5E-02)); +#476363 = CIRCLE('',#476364,0.222710800783); +#476364 = AXIS2_PLACEMENT_3D('',#476365,#476366,#476367); +#476365 = CARTESIAN_POINT('',(153.67024834013,-122.1178665355,-7.5E-02) + ); +#476366 = DIRECTION('',(0.,0.,1.)); +#476367 = DIRECTION('',(-0.789298675759,0.614009446543,0.)); +#476368 = ORIENTED_EDGE('',*,*,#476369,.T.); +#476369 = EDGE_CURVE('',#476361,#476370,#476372,.T.); +#476370 = VERTEX_POINT('',#476371); +#476371 = CARTESIAN_POINT('',(153.608032,-122.330074,-7.5E-02)); +#476372 = LINE('',#476373,#476374); +#476373 = CARTESIAN_POINT('',(153.530608,-122.291362,-7.5E-02)); +#476374 = VECTOR('',#476375,1.); +#476375 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#476376 = ORIENTED_EDGE('',*,*,#476377,.T.); +#476377 = EDGE_CURVE('',#476370,#476378,#476380,.T.); +#476378 = VERTEX_POINT('',#476379); +#476379 = CARTESIAN_POINT('',(153.870139,-122.330074,-7.5E-02)); +#476380 = LINE('',#476381,#476382); +#476381 = CARTESIAN_POINT('',(153.608032,-122.330074,-7.5E-02)); +#476382 = VECTOR('',#476383,1.); +#476383 = DIRECTION('',(1.,0.,0.)); +#476384 = ORIENTED_EDGE('',*,*,#476385,.T.); +#476385 = EDGE_CURVE('',#476378,#476386,#476388,.T.); +#476386 = VERTEX_POINT('',#476387); +#476387 = CARTESIAN_POINT('',(154.022419,-122.177794,-7.5E-02)); +#476388 = CIRCLE('',#476389,0.215072998571); +#476389 = AXIS2_PLACEMENT_3D('',#476390,#476391,#476392); +#476390 = CARTESIAN_POINT('',(153.81463213236,-122.1222871323,-7.5E-02) + ); +#476391 = DIRECTION('',(0.,0.,1.)); +#476392 = DIRECTION('',(0.258083850599,-0.966122521247,0.)); +#476393 = ORIENTED_EDGE('',*,*,#476394,.T.); +#476394 = EDGE_CURVE('',#476386,#476395,#476397,.T.); +#476395 = VERTEX_POINT('',#476396); +#476396 = CARTESIAN_POINT('',(154.022419,-122.058544,-7.5E-02)); +#476397 = LINE('',#476398,#476399); +#476398 = CARTESIAN_POINT('',(154.022419,-122.177794,-7.5E-02)); +#476399 = VECTOR('',#476400,1.); +#476400 = DIRECTION('',(0.,1.,0.)); +#476401 = ORIENTED_EDGE('',*,*,#476402,.T.); +#476402 = EDGE_CURVE('',#476395,#476403,#476405,.T.); +#476403 = VERTEX_POINT('',#476404); +#476404 = CARTESIAN_POINT('',(153.983708,-121.981122,-7.5E-02)); +#476405 = LINE('',#476406,#476407); +#476406 = CARTESIAN_POINT('',(154.022419,-122.058544,-7.5E-02)); +#476407 = VECTOR('',#476408,1.); +#476408 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#476409 = ORIENTED_EDGE('',*,*,#476410,.T.); +#476410 = EDGE_CURVE('',#476403,#476342,#476411,.T.); +#476411 = LINE('',#476412,#476413); +#476412 = CARTESIAN_POINT('',(153.983708,-121.981122,-7.5E-02)); +#476413 = VECTOR('',#476414,1.); +#476414 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#476415 = PLANE('',#476416); +#476416 = AXIS2_PLACEMENT_3D('',#476417,#476418,#476419); +#476417 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476418 = DIRECTION('',(-0.,-0.,-1.)); +#476419 = DIRECTION('',(-1.,0.,0.)); +#476420 = SHELL_BASED_SURFACE_MODEL('',(#476421)); +#476421 = OPEN_SHELL('',(#476422)); +#476422 = ADVANCED_FACE('',(#476423),#476517,.T.); +#476423 = FACE_BOUND('',#476424,.T.); +#476424 = EDGE_LOOP('',(#476425,#476436,#476444,#476452,#476460,#476469, + #476477,#476486,#476494,#476503,#476511)); +#476425 = ORIENTED_EDGE('',*,*,#476426,.T.); +#476426 = EDGE_CURVE('',#476427,#476429,#476431,.T.); +#476427 = VERTEX_POINT('',#476428); +#476428 = CARTESIAN_POINT('',(142.944567,-118.327039,-7.5E-02)); +#476429 = VERTEX_POINT('',#476430); +#476430 = CARTESIAN_POINT('',(143.06,-118.35,-7.5E-02)); +#476431 = CIRCLE('',#476432,6.000007318647E-02); +#476432 = AXIS2_PLACEMENT_3D('',#476433,#476434,#476435); +#476433 = CARTESIAN_POINT('',(142.99999992681,-118.3499998233,-7.5E-02) + ); +#476434 = DIRECTION('',(0.,0.,-1.)); +#476435 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#476436 = ORIENTED_EDGE('',*,*,#476437,.T.); +#476437 = EDGE_CURVE('',#476429,#476438,#476440,.T.); +#476438 = VERTEX_POINT('',#476439); +#476439 = CARTESIAN_POINT('',(143.06,-122.3,-7.5E-02)); +#476440 = LINE('',#476441,#476442); +#476441 = CARTESIAN_POINT('',(143.06,-118.35,-7.5E-02)); +#476442 = VECTOR('',#476443,1.); +#476443 = DIRECTION('',(0.,-1.,0.)); +#476444 = ORIENTED_EDGE('',*,*,#476445,.T.); +#476445 = EDGE_CURVE('',#476438,#476446,#476448,.T.); +#476446 = VERTEX_POINT('',#476447); +#476447 = CARTESIAN_POINT('',(144.94,-122.3,-7.5E-02)); +#476448 = LINE('',#476449,#476450); +#476449 = CARTESIAN_POINT('',(143.06,-122.3,-7.5E-02)); +#476450 = VECTOR('',#476451,1.); +#476451 = DIRECTION('',(1.,0.,0.)); +#476452 = ORIENTED_EDGE('',*,*,#476453,.T.); +#476453 = EDGE_CURVE('',#476446,#476454,#476456,.T.); +#476454 = VERTEX_POINT('',#476455); +#476455 = CARTESIAN_POINT('',(144.94,-118.35,-7.5E-02)); +#476456 = LINE('',#476457,#476458); +#476457 = CARTESIAN_POINT('',(144.94,-122.3,-7.5E-02)); +#476458 = VECTOR('',#476459,1.); +#476459 = DIRECTION('',(0.,1.,0.)); +#476460 = ORIENTED_EDGE('',*,*,#476461,.T.); +#476461 = EDGE_CURVE('',#476454,#476462,#476464,.T.); +#476462 = VERTEX_POINT('',#476463); +#476463 = CARTESIAN_POINT('',(145.06,-118.35,-7.5E-02)); +#476464 = CIRCLE('',#476465,6.000000000043E-02); +#476465 = AXIS2_PLACEMENT_3D('',#476466,#476467,#476468); +#476466 = CARTESIAN_POINT('',(145.,-118.3499997744,-7.5E-02)); +#476467 = DIRECTION('',(0.,0.,-1.)); +#476468 = DIRECTION('',(-0.999999999993,-3.759794016836E-06,-0.)); +#476469 = ORIENTED_EDGE('',*,*,#476470,.T.); +#476470 = EDGE_CURVE('',#476462,#476471,#476473,.T.); +#476471 = VERTEX_POINT('',#476472); +#476472 = CARTESIAN_POINT('',(145.06,-122.36,-7.5E-02)); +#476473 = LINE('',#476474,#476475); +#476474 = CARTESIAN_POINT('',(145.06,-118.35,-7.5E-02)); +#476475 = VECTOR('',#476476,1.); +#476476 = DIRECTION('',(0.,-1.,0.)); +#476477 = ORIENTED_EDGE('',*,*,#476478,.T.); +#476478 = EDGE_CURVE('',#476471,#476479,#476481,.T.); +#476479 = VERTEX_POINT('',#476480); +#476480 = CARTESIAN_POINT('',(145.,-122.42,-7.5E-02)); +#476481 = CIRCLE('',#476482,5.999932016265E-02); +#476482 = AXIS2_PLACEMENT_3D('',#476483,#476484,#476485); +#476483 = CARTESIAN_POINT('',(145.00000067984,-122.3600006798,-7.5E-02) + ); +#476484 = DIRECTION('',(0.,0.,-1.)); +#476485 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#476486 = ORIENTED_EDGE('',*,*,#476487,.T.); +#476487 = EDGE_CURVE('',#476479,#476488,#476490,.T.); +#476488 = VERTEX_POINT('',#476489); +#476489 = CARTESIAN_POINT('',(143.,-122.42,-7.5E-02)); +#476490 = LINE('',#476491,#476492); +#476491 = CARTESIAN_POINT('',(145.,-122.42,-7.5E-02)); +#476492 = VECTOR('',#476493,1.); +#476493 = DIRECTION('',(-1.,0.,0.)); +#476494 = ORIENTED_EDGE('',*,*,#476495,.T.); +#476495 = EDGE_CURVE('',#476488,#476496,#476498,.T.); +#476496 = VERTEX_POINT('',#476497); +#476497 = CARTESIAN_POINT('',(142.94,-122.36,-7.5E-02)); +#476498 = CIRCLE('',#476499,5.999932016262E-02); +#476499 = AXIS2_PLACEMENT_3D('',#476500,#476501,#476502); +#476500 = CARTESIAN_POINT('',(142.99999932015,-122.3600006798,-7.5E-02) + ); +#476501 = DIRECTION('',(0.,0.,-1.)); +#476502 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#476503 = ORIENTED_EDGE('',*,*,#476504,.T.); +#476504 = EDGE_CURVE('',#476496,#476505,#476507,.T.); +#476505 = VERTEX_POINT('',#476506); +#476506 = CARTESIAN_POINT('',(142.94,-118.35,-7.5E-02)); +#476507 = LINE('',#476508,#476509); +#476508 = CARTESIAN_POINT('',(142.94,-122.36,-7.5E-02)); +#476509 = VECTOR('',#476510,1.); +#476510 = DIRECTION('',(0.,1.,0.)); +#476511 = ORIENTED_EDGE('',*,*,#476512,.T.); +#476512 = EDGE_CURVE('',#476505,#476427,#476513,.T.); +#476513 = LINE('',#476514,#476515); +#476514 = CARTESIAN_POINT('',(142.94,-118.35,-7.5E-02)); +#476515 = VECTOR('',#476516,1.); +#476516 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#476517 = PLANE('',#476518); +#476518 = AXIS2_PLACEMENT_3D('',#476519,#476520,#476521); +#476519 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476520 = DIRECTION('',(-0.,-0.,-1.)); +#476521 = DIRECTION('',(-1.,0.,0.)); +#476522 = SHELL_BASED_SURFACE_MODEL('',(#476523)); +#476523 = OPEN_SHELL('',(#476524)); +#476524 = ADVANCED_FACE('',(#476525,#476602),#476679,.T.); +#476525 = FACE_BOUND('',#476526,.T.); +#476526 = EDGE_LOOP('',(#476527,#476538,#476546,#476554,#476562,#476571, + #476579,#476587,#476596)); +#476527 = ORIENTED_EDGE('',*,*,#476528,.T.); +#476528 = EDGE_CURVE('',#476529,#476531,#476533,.T.); +#476529 = VERTEX_POINT('',#476530); +#476530 = CARTESIAN_POINT('',(151.798705,-122.11672,-7.5E-02)); +#476531 = VERTEX_POINT('',#476532); +#476532 = CARTESIAN_POINT('',(151.975011,-121.618031,-7.5E-02)); +#476533 = CIRCLE('',#476534,0.320678184363); +#476534 = AXIS2_PLACEMENT_3D('',#476535,#476536,#476537); +#476535 = CARTESIAN_POINT('',(152.05784510741,-121.9278261074,-7.5E-02) + ); +#476536 = DIRECTION('',(0.,0.,-1.)); +#476537 = DIRECTION('',(-0.80810020777,-0.589045035802,-0.)); +#476538 = ORIENTED_EDGE('',*,*,#476539,.T.); +#476539 = EDGE_CURVE('',#476531,#476540,#476542,.T.); +#476540 = VERTEX_POINT('',#476541); +#476541 = CARTESIAN_POINT('',(152.274454,-121.616277,-7.5E-02)); +#476542 = LINE('',#476543,#476544); +#476543 = CARTESIAN_POINT('',(151.975011,-121.618031,-7.5E-02)); +#476544 = VECTOR('',#476545,1.); +#476545 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#476546 = ORIENTED_EDGE('',*,*,#476547,.T.); +#476547 = EDGE_CURVE('',#476540,#476548,#476550,.T.); +#476548 = VERTEX_POINT('',#476549); +#476549 = CARTESIAN_POINT('',(152.294359,-121.621068,-7.5E-02)); +#476550 = LINE('',#476551,#476552); +#476551 = CARTESIAN_POINT('',(152.274454,-121.616277,-7.5E-02)); +#476552 = VECTOR('',#476553,1.); +#476553 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#476554 = ORIENTED_EDGE('',*,*,#476555,.T.); +#476555 = EDGE_CURVE('',#476548,#476556,#476558,.T.); +#476556 = VERTEX_POINT('',#476557); +#476557 = CARTESIAN_POINT('',(152.402591,-121.678052,-7.5E-02)); +#476558 = LINE('',#476559,#476560); +#476559 = CARTESIAN_POINT('',(152.294359,-121.621068,-7.5E-02)); +#476560 = VECTOR('',#476561,1.); +#476561 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#476562 = ORIENTED_EDGE('',*,*,#476563,.T.); +#476563 = EDGE_CURVE('',#476556,#476564,#476566,.T.); +#476564 = VERTEX_POINT('',#476565); +#476565 = CARTESIAN_POINT('',(152.510232,-122.010394,-7.5E-02)); +#476566 = CIRCLE('',#476567,0.323553911777); +#476567 = AXIS2_PLACEMENT_3D('',#476568,#476569,#476570); +#476568 = CARTESIAN_POINT('',(152.19730715022,-121.928143333,-7.5E-02)); +#476569 = DIRECTION('',(0.,0.,-1.)); +#476570 = DIRECTION('',(0.634465671105,0.772951041263,0.)); +#476571 = ORIENTED_EDGE('',*,*,#476572,.T.); +#476572 = EDGE_CURVE('',#476564,#476573,#476575,.T.); +#476573 = VERTEX_POINT('',#476574); +#476574 = CARTESIAN_POINT('',(152.450211,-122.129716,-7.5E-02)); +#476575 = LINE('',#476576,#476577); +#476576 = CARTESIAN_POINT('',(152.510232,-122.010394,-7.5E-02)); +#476577 = VECTOR('',#476578,1.); +#476578 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#476579 = ORIENTED_EDGE('',*,*,#476580,.T.); +#476580 = EDGE_CURVE('',#476573,#476581,#476583,.T.); +#476581 = VERTEX_POINT('',#476582); +#476582 = CARTESIAN_POINT('',(152.389596,-122.186701,-7.5E-02)); +#476583 = LINE('',#476584,#476585); +#476584 = CARTESIAN_POINT('',(152.450211,-122.129716,-7.5E-02)); +#476585 = VECTOR('',#476586,1.); +#476586 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#476587 = ORIENTED_EDGE('',*,*,#476588,.T.); +#476588 = EDGE_CURVE('',#476581,#476589,#476591,.T.); +#476589 = VERTEX_POINT('',#476590); +#476590 = CARTESIAN_POINT('',(151.85569,-122.177334,-7.5E-02)); +#476591 = CIRCLE('',#476592,0.484201554455); +#476592 = AXIS2_PLACEMENT_3D('',#476593,#476594,#476595); +#476593 = CARTESIAN_POINT('',(152.12972870064,-121.778142397,-7.5E-02)); +#476594 = DIRECTION('',(-0.,0.,-1.)); +#476595 = DIRECTION('',(0.536692410344,-0.843777966457,-0.)); +#476596 = ORIENTED_EDGE('',*,*,#476597,.T.); +#476597 = EDGE_CURVE('',#476589,#476529,#476598,.T.); +#476598 = LINE('',#476599,#476600); +#476599 = CARTESIAN_POINT('',(151.85569,-122.177334,-7.5E-02)); +#476600 = VECTOR('',#476601,1.); +#476601 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#476602 = FACE_BOUND('',#476603,.T.); +#476603 = EDGE_LOOP('',(#476604,#476615,#476623,#476632,#476640,#476648, + #476657,#476665,#476673)); +#476604 = ORIENTED_EDGE('',*,*,#476605,.T.); +#476605 = EDGE_CURVE('',#476606,#476608,#476610,.T.); +#476606 = VERTEX_POINT('',#476607); +#476607 = CARTESIAN_POINT('',(152.337617,-121.7545,-7.5E-02)); +#476608 = VERTEX_POINT('',#476609); +#476609 = CARTESIAN_POINT('',(151.920664,-121.7545,-7.5E-02)); +#476610 = CIRCLE('',#476611,0.382072162856); +#476611 = AXIS2_PLACEMENT_3D('',#476612,#476613,#476614); +#476612 = CARTESIAN_POINT('',(152.1291405,-122.0746822708,-7.5E-02)); +#476613 = DIRECTION('',(0.,0.,1.)); +#476614 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#476615 = ORIENTED_EDGE('',*,*,#476616,.T.); +#476616 = EDGE_CURVE('',#476608,#476617,#476619,.T.); +#476617 = VERTEX_POINT('',#476618); +#476618 = CARTESIAN_POINT('',(151.884519,-121.790644,-7.5E-02)); +#476619 = LINE('',#476620,#476621); +#476620 = CARTESIAN_POINT('',(151.920664,-121.7545,-7.5E-02)); +#476621 = VECTOR('',#476622,1.); +#476622 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#476623 = ORIENTED_EDGE('',*,*,#476624,.T.); +#476624 = EDGE_CURVE('',#476617,#476625,#476627,.T.); +#476625 = VERTEX_POINT('',#476626); +#476626 = CARTESIAN_POINT('',(151.920664,-122.100886,-7.5E-02)); +#476627 = CIRCLE('',#476628,0.222710800783); +#476628 = AXIS2_PLACEMENT_3D('',#476629,#476630,#476631); +#476629 = CARTESIAN_POINT('',(152.06030434013,-121.9273905355,-7.5E-02) + ); +#476630 = DIRECTION('',(0.,0.,1.)); +#476631 = DIRECTION('',(-0.789298675759,0.614009446543,0.)); +#476632 = ORIENTED_EDGE('',*,*,#476633,.T.); +#476633 = EDGE_CURVE('',#476625,#476634,#476636,.T.); +#476634 = VERTEX_POINT('',#476635); +#476635 = CARTESIAN_POINT('',(151.998088,-122.139598,-7.5E-02)); +#476636 = LINE('',#476637,#476638); +#476637 = CARTESIAN_POINT('',(151.920664,-122.100886,-7.5E-02)); +#476638 = VECTOR('',#476639,1.); +#476639 = DIRECTION('',(0.894427191,-0.4472135955,0.)); +#476640 = ORIENTED_EDGE('',*,*,#476641,.T.); +#476641 = EDGE_CURVE('',#476634,#476642,#476644,.T.); +#476642 = VERTEX_POINT('',#476643); +#476643 = CARTESIAN_POINT('',(152.260195,-122.139598,-7.5E-02)); +#476644 = LINE('',#476645,#476646); +#476645 = CARTESIAN_POINT('',(151.998088,-122.139598,-7.5E-02)); +#476646 = VECTOR('',#476647,1.); +#476647 = DIRECTION('',(1.,0.,0.)); +#476648 = ORIENTED_EDGE('',*,*,#476649,.T.); +#476649 = EDGE_CURVE('',#476642,#476650,#476652,.T.); +#476650 = VERTEX_POINT('',#476651); +#476651 = CARTESIAN_POINT('',(152.412475,-121.987318,-7.5E-02)); +#476652 = CIRCLE('',#476653,0.215072998571); +#476653 = AXIS2_PLACEMENT_3D('',#476654,#476655,#476656); +#476654 = CARTESIAN_POINT('',(152.20468813236,-121.9318111323,-7.5E-02) + ); +#476655 = DIRECTION('',(0.,0.,1.)); +#476656 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#476657 = ORIENTED_EDGE('',*,*,#476658,.T.); +#476658 = EDGE_CURVE('',#476650,#476659,#476661,.T.); +#476659 = VERTEX_POINT('',#476660); +#476660 = CARTESIAN_POINT('',(152.412475,-121.868068,-7.5E-02)); +#476661 = LINE('',#476662,#476663); +#476662 = CARTESIAN_POINT('',(152.412475,-121.987318,-7.5E-02)); +#476663 = VECTOR('',#476664,1.); +#476664 = DIRECTION('',(0.,1.,0.)); +#476665 = ORIENTED_EDGE('',*,*,#476666,.T.); +#476666 = EDGE_CURVE('',#476659,#476667,#476669,.T.); +#476667 = VERTEX_POINT('',#476668); +#476668 = CARTESIAN_POINT('',(152.373764,-121.790646,-7.5E-02)); +#476669 = LINE('',#476670,#476671); +#476670 = CARTESIAN_POINT('',(152.412475,-121.868068,-7.5E-02)); +#476671 = VECTOR('',#476672,1.); +#476672 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#476673 = ORIENTED_EDGE('',*,*,#476674,.T.); +#476674 = EDGE_CURVE('',#476667,#476606,#476675,.T.); +#476675 = LINE('',#476676,#476677); +#476676 = CARTESIAN_POINT('',(152.373764,-121.790646,-7.5E-02)); +#476677 = VECTOR('',#476678,1.); +#476678 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#476679 = PLANE('',#476680); +#476680 = AXIS2_PLACEMENT_3D('',#476681,#476682,#476683); +#476681 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476682 = DIRECTION('',(-0.,-0.,-1.)); +#476683 = DIRECTION('',(-1.,0.,0.)); +#476684 = SHELL_BASED_SURFACE_MODEL('',(#476685)); +#476685 = OPEN_SHELL('',(#476686)); +#476686 = ADVANCED_FACE('',(#476687),#476723,.T.); +#476687 = FACE_BOUND('',#476688,.T.); +#476688 = EDGE_LOOP('',(#476689,#476700,#476708,#476717)); +#476689 = ORIENTED_EDGE('',*,*,#476690,.T.); +#476690 = EDGE_CURVE('',#476691,#476693,#476695,.T.); +#476691 = VERTEX_POINT('',#476692); +#476692 = CARTESIAN_POINT('',(125.356359,-122.18,-7.5E-02)); +#476693 = VERTEX_POINT('',#476694); +#476694 = CARTESIAN_POINT('',(125.356359,-122.06,-7.5E-02)); +#476695 = CIRCLE('',#476696,6.000000000042E-02); +#476696 = AXIS2_PLACEMENT_3D('',#476697,#476698,#476699); +#476697 = CARTESIAN_POINT('',(125.35635877441,-122.12,-7.5E-02)); +#476698 = DIRECTION('',(0.,0.,-1.)); +#476699 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#476700 = ORIENTED_EDGE('',*,*,#476701,.T.); +#476701 = EDGE_CURVE('',#476693,#476702,#476704,.T.); +#476702 = VERTEX_POINT('',#476703); +#476703 = CARTESIAN_POINT('',(125.663641,-122.06,-7.5E-02)); +#476704 = LINE('',#476705,#476706); +#476705 = CARTESIAN_POINT('',(125.356359,-122.06,-7.5E-02)); +#476706 = VECTOR('',#476707,1.); +#476707 = DIRECTION('',(1.,0.,0.)); +#476708 = ORIENTED_EDGE('',*,*,#476709,.T.); +#476709 = EDGE_CURVE('',#476702,#476710,#476712,.T.); +#476710 = VERTEX_POINT('',#476711); +#476711 = CARTESIAN_POINT('',(125.663641,-122.18,-7.5E-02)); +#476712 = CIRCLE('',#476713,6.000000000042E-02); +#476713 = AXIS2_PLACEMENT_3D('',#476714,#476715,#476716); +#476714 = CARTESIAN_POINT('',(125.66364122558,-122.12,-7.5E-02)); +#476715 = DIRECTION('',(0.,0.,-1.)); +#476716 = DIRECTION('',(-3.759794490531E-06,0.999999999993,-0.)); +#476717 = ORIENTED_EDGE('',*,*,#476718,.T.); +#476718 = EDGE_CURVE('',#476710,#476691,#476719,.T.); +#476719 = LINE('',#476720,#476721); +#476720 = CARTESIAN_POINT('',(125.663641,-122.18,-7.5E-02)); +#476721 = VECTOR('',#476722,1.); +#476722 = DIRECTION('',(-1.,0.,0.)); +#476723 = PLANE('',#476724); +#476724 = AXIS2_PLACEMENT_3D('',#476725,#476726,#476727); +#476725 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476726 = DIRECTION('',(-0.,-0.,-1.)); +#476727 = DIRECTION('',(-1.,0.,0.)); +#476728 = SHELL_BASED_SURFACE_MODEL('',(#476729)); +#476729 = OPEN_SHELL('',(#476730)); +#476730 = ADVANCED_FACE('',(#476731),#476898,.T.); +#476731 = FACE_BOUND('',#476732,.T.); +#476732 = EDGE_LOOP('',(#476733,#476743,#476751,#476759,#476767,#476775, + #476784,#476792,#476801,#476809,#476817,#476826,#476834,#476843, + #476851,#476859,#476868,#476876,#476884,#476892)); +#476733 = ORIENTED_EDGE('',*,*,#476734,.T.); +#476734 = EDGE_CURVE('',#476735,#476737,#476739,.T.); +#476735 = VERTEX_POINT('',#476736); +#476736 = CARTESIAN_POINT('',(153.478629,-121.00202,-7.5E-02)); +#476737 = VERTEX_POINT('',#476738); +#476738 = CARTESIAN_POINT('',(153.584955,-120.951364,-7.5E-02)); +#476739 = LINE('',#476740,#476741); +#476740 = CARTESIAN_POINT('',(153.478629,-121.00202,-7.5E-02)); +#476741 = VECTOR('',#476742,1.); +#476742 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#476743 = ORIENTED_EDGE('',*,*,#476744,.T.); +#476744 = EDGE_CURVE('',#476737,#476745,#476747,.T.); +#476745 = VERTEX_POINT('',#476746); +#476746 = CARTESIAN_POINT('',(153.884398,-120.94961,-7.5E-02)); +#476747 = LINE('',#476748,#476749); +#476748 = CARTESIAN_POINT('',(153.584955,-120.951364,-7.5E-02)); +#476749 = VECTOR('',#476750,1.); +#476750 = DIRECTION('',(0.999982845041,5.857441684039E-03,0.)); +#476751 = ORIENTED_EDGE('',*,*,#476752,.T.); +#476752 = EDGE_CURVE('',#476745,#476753,#476755,.T.); +#476753 = VERTEX_POINT('',#476754); +#476754 = CARTESIAN_POINT('',(153.904303,-120.954401,-7.5E-02)); +#476755 = LINE('',#476756,#476757); +#476756 = CARTESIAN_POINT('',(153.884398,-120.94961,-7.5E-02)); +#476757 = VECTOR('',#476758,1.); +#476758 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#476759 = ORIENTED_EDGE('',*,*,#476760,.T.); +#476760 = EDGE_CURVE('',#476753,#476761,#476763,.T.); +#476761 = VERTEX_POINT('',#476762); +#476762 = CARTESIAN_POINT('',(154.012535,-121.011385,-7.5E-02)); +#476763 = LINE('',#476764,#476765); +#476764 = CARTESIAN_POINT('',(153.904303,-120.954401,-7.5E-02)); +#476765 = VECTOR('',#476766,1.); +#476766 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#476767 = ORIENTED_EDGE('',*,*,#476768,.T.); +#476768 = EDGE_CURVE('',#476761,#476769,#476771,.T.); +#476769 = VERTEX_POINT('',#476770); +#476770 = CARTESIAN_POINT('',(154.069521,-121.071999,-7.5E-02)); +#476771 = LINE('',#476772,#476773); +#476772 = CARTESIAN_POINT('',(154.012535,-121.011385,-7.5E-02)); +#476773 = VECTOR('',#476774,1.); +#476774 = DIRECTION('',(0.684966417831,-0.72857464027,0.)); +#476775 = ORIENTED_EDGE('',*,*,#476776,.T.); +#476776 = EDGE_CURVE('',#476769,#476777,#476779,.T.); +#476777 = VERTEX_POINT('',#476778); +#476778 = CARTESIAN_POINT('',(154.069521,-121.497673,-7.5E-02)); +#476779 = CIRCLE('',#476780,0.375892769601); +#476780 = AXIS2_PLACEMENT_3D('',#476781,#476782,#476783); +#476781 = CARTESIAN_POINT('',(153.75968913322,-121.284836,-7.5E-02)); +#476782 = DIRECTION('',(0.,0.,-1.)); +#476783 = DIRECTION('',(0.824255989558,0.566217329016,0.)); +#476784 = ORIENTED_EDGE('',*,*,#476785,.T.); +#476785 = EDGE_CURVE('',#476777,#476786,#476788,.T.); +#476786 = VERTEX_POINT('',#476787); +#476787 = CARTESIAN_POINT('',(154.05756,-121.513085,-7.5E-02)); +#476788 = LINE('',#476789,#476790); +#476789 = CARTESIAN_POINT('',(154.069521,-121.497673,-7.5E-02)); +#476790 = VECTOR('',#476791,1.); +#476791 = DIRECTION('',(-0.61310632988,-0.790000397634,0.)); +#476792 = ORIENTED_EDGE('',*,*,#476793,.T.); +#476793 = EDGE_CURVE('',#476786,#476794,#476796,.T.); +#476794 = VERTEX_POINT('',#476795); +#476795 = CARTESIAN_POINT('',(153.980079,-121.452951,-7.5E-02)); +#476796 = CIRCLE('',#476797,4.999994440892E-02); +#476797 = AXIS2_PLACEMENT_3D('',#476798,#476799,#476800); +#476798 = CARTESIAN_POINT('',(154.02479997725,-121.47531232,-7.5E-02)); +#476799 = DIRECTION('',(0.,0.,-1.)); +#476800 = DIRECTION('',(0.655201183408,-0.755454438905,0.)); +#476801 = ORIENTED_EDGE('',*,*,#476802,.T.); +#476802 = EDGE_CURVE('',#476794,#476803,#476805,.T.); +#476803 = VERTEX_POINT('',#476804); +#476804 = CARTESIAN_POINT('',(154.022419,-121.36827,-7.5E-02)); +#476805 = LINE('',#476806,#476807); +#476806 = CARTESIAN_POINT('',(153.980079,-121.452951,-7.5E-02)); +#476807 = VECTOR('',#476808,1.); +#476808 = DIRECTION('',(0.44720937056,0.894429303457,0.)); +#476809 = ORIENTED_EDGE('',*,*,#476810,.T.); +#476810 = EDGE_CURVE('',#476803,#476811,#476813,.T.); +#476811 = VERTEX_POINT('',#476812); +#476812 = CARTESIAN_POINT('',(154.022419,-121.201401,-7.5E-02)); +#476813 = LINE('',#476814,#476815); +#476814 = CARTESIAN_POINT('',(154.022419,-121.36827,-7.5E-02)); +#476815 = VECTOR('',#476816,1.); +#476816 = DIRECTION('',(0.,1.,0.)); +#476817 = ORIENTED_EDGE('',*,*,#476818,.T.); +#476818 = EDGE_CURVE('',#476811,#476819,#476821,.T.); +#476819 = VERTEX_POINT('',#476820); +#476820 = CARTESIAN_POINT('',(153.870139,-121.049122,-7.5E-02)); +#476821 = CIRCLE('',#476822,0.215064663095); +#476822 = AXIS2_PLACEMENT_3D('',#476823,#476824,#476825); +#476823 = CARTESIAN_POINT('',(153.81463922892,-121.2569021355,-7.5E-02) + ); +#476824 = DIRECTION('',(0.,0.,1.)); +#476825 = DIRECTION('',(0.96612696889,0.25806720052,-0.)); +#476826 = ORIENTED_EDGE('',*,*,#476827,.T.); +#476827 = EDGE_CURVE('',#476819,#476828,#476830,.T.); +#476828 = VERTEX_POINT('',#476829); +#476829 = CARTESIAN_POINT('',(153.608032,-121.049122,-7.5E-02)); +#476830 = LINE('',#476831,#476832); +#476831 = CARTESIAN_POINT('',(153.870139,-121.049122,-7.5E-02)); +#476832 = VECTOR('',#476833,1.); +#476833 = DIRECTION('',(-1.,0.,0.)); +#476834 = ORIENTED_EDGE('',*,*,#476835,.T.); +#476835 = EDGE_CURVE('',#476828,#476836,#476838,.T.); +#476836 = VERTEX_POINT('',#476837); +#476837 = CARTESIAN_POINT('',(153.455752,-121.201401,-7.5E-02)); +#476838 = CIRCLE('',#476839,0.215060043145); +#476839 = AXIS2_PLACEMENT_3D('',#476840,#476841,#476842); +#476840 = CARTESIAN_POINT('',(153.66352799719,-121.2568983616,-7.5E-02) + ); +#476841 = DIRECTION('',(0.,0.,1.)); +#476842 = DIRECTION('',(-0.258048851758,0.966131869936,0.)); +#476843 = ORIENTED_EDGE('',*,*,#476844,.T.); +#476844 = EDGE_CURVE('',#476836,#476845,#476847,.T.); +#476845 = VERTEX_POINT('',#476846); +#476846 = CARTESIAN_POINT('',(153.455752,-121.368271,-7.5E-02)); +#476847 = LINE('',#476848,#476849); +#476848 = CARTESIAN_POINT('',(153.455752,-121.201401,-7.5E-02)); +#476849 = VECTOR('',#476850,1.); +#476850 = DIRECTION('',(0.,-1.,0.)); +#476851 = ORIENTED_EDGE('',*,*,#476852,.T.); +#476852 = EDGE_CURVE('',#476845,#476853,#476855,.T.); +#476853 = VERTEX_POINT('',#476854); +#476854 = CARTESIAN_POINT('',(153.498092,-121.452951,-7.5E-02)); +#476855 = LINE('',#476856,#476857); +#476856 = CARTESIAN_POINT('',(153.455752,-121.368271,-7.5E-02)); +#476857 = VECTOR('',#476858,1.); +#476858 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#476859 = ORIENTED_EDGE('',*,*,#476860,.T.); +#476860 = EDGE_CURVE('',#476853,#476861,#476863,.T.); +#476861 = VERTEX_POINT('',#476862); +#476862 = CARTESIAN_POINT('',(153.408649,-121.497672,-7.5E-02)); +#476863 = CIRCLE('',#476864,5.000004522505E-02); +#476864 = AXIS2_PLACEMENT_3D('',#476865,#476866,#476867); +#476865 = CARTESIAN_POINT('',(153.45337053675,-121.4753115735,-7.5E-02) + ); +#476866 = DIRECTION('',(0.,0.,-1.)); +#476867 = DIRECTION('',(0.894428455807,0.447211065876,0.)); +#476868 = ORIENTED_EDGE('',*,*,#476869,.T.); +#476869 = EDGE_CURVE('',#476861,#476870,#476872,.T.); +#476870 = VERTEX_POINT('',#476871); +#476871 = CARTESIAN_POINT('',(153.357994,-121.391346,-7.5E-02)); +#476872 = LINE('',#476873,#476874); +#476873 = CARTESIAN_POINT('',(153.408649,-121.497672,-7.5E-02)); +#476874 = VECTOR('',#476875,1.); +#476875 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#476876 = ORIENTED_EDGE('',*,*,#476877,.T.); +#476877 = EDGE_CURVE('',#476870,#476878,#476880,.T.); +#476878 = VERTEX_POINT('',#476879); +#476879 = CARTESIAN_POINT('',(153.357994,-121.178325,-7.5E-02)); +#476880 = LINE('',#476881,#476882); +#476881 = CARTESIAN_POINT('',(153.357994,-121.391346,-7.5E-02)); +#476882 = VECTOR('',#476883,1.); +#476883 = DIRECTION('',(0.,1.,0.)); +#476884 = ORIENTED_EDGE('',*,*,#476885,.T.); +#476885 = EDGE_CURVE('',#476878,#476886,#476888,.T.); +#476886 = VERTEX_POINT('',#476887); +#476887 = CARTESIAN_POINT('',(153.418016,-121.059005,-7.5E-02)); +#476888 = LINE('',#476889,#476890); +#476889 = CARTESIAN_POINT('',(153.357994,-121.178325,-7.5E-02)); +#476890 = VECTOR('',#476891,1.); +#476891 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#476892 = ORIENTED_EDGE('',*,*,#476893,.T.); +#476893 = EDGE_CURVE('',#476886,#476735,#476894,.T.); +#476894 = LINE('',#476895,#476896); +#476895 = CARTESIAN_POINT('',(153.418016,-121.059005,-7.5E-02)); +#476896 = VECTOR('',#476897,1.); +#476897 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#476898 = PLANE('',#476899); +#476899 = AXIS2_PLACEMENT_3D('',#476900,#476901,#476902); +#476900 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476901 = DIRECTION('',(-0.,-0.,-1.)); +#476902 = DIRECTION('',(-1.,0.,0.)); +#476903 = SHELL_BASED_SURFACE_MODEL('',(#476904)); +#476904 = OPEN_SHELL('',(#476905)); +#476905 = ADVANCED_FACE('',(#476906),#476942,.T.); +#476906 = FACE_BOUND('',#476907,.T.); +#476907 = EDGE_LOOP('',(#476908,#476919,#476927,#476936)); +#476908 = ORIENTED_EDGE('',*,*,#476909,.T.); +#476909 = EDGE_CURVE('',#476910,#476912,#476914,.T.); +#476910 = VERTEX_POINT('',#476911); +#476911 = CARTESIAN_POINT('',(125.376359,-121.44,-7.5E-02)); +#476912 = VERTEX_POINT('',#476913); +#476913 = CARTESIAN_POINT('',(125.376359,-121.32,-7.5E-02)); +#476914 = CIRCLE('',#476915,6.000000000043E-02); +#476915 = AXIS2_PLACEMENT_3D('',#476916,#476917,#476918); +#476916 = CARTESIAN_POINT('',(125.37635877441,-121.38,-7.5E-02)); +#476917 = DIRECTION('',(0.,0.,-1.)); +#476918 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#476919 = ORIENTED_EDGE('',*,*,#476920,.T.); +#476920 = EDGE_CURVE('',#476912,#476921,#476923,.T.); +#476921 = VERTEX_POINT('',#476922); +#476922 = CARTESIAN_POINT('',(125.683641,-121.32,-7.5E-02)); +#476923 = LINE('',#476924,#476925); +#476924 = CARTESIAN_POINT('',(125.376359,-121.32,-7.5E-02)); +#476925 = VECTOR('',#476926,1.); +#476926 = DIRECTION('',(1.,0.,0.)); +#476927 = ORIENTED_EDGE('',*,*,#476928,.T.); +#476928 = EDGE_CURVE('',#476921,#476929,#476931,.T.); +#476929 = VERTEX_POINT('',#476930); +#476930 = CARTESIAN_POINT('',(125.683641,-121.44,-7.5E-02)); +#476931 = CIRCLE('',#476932,6.000000000043E-02); +#476932 = AXIS2_PLACEMENT_3D('',#476933,#476934,#476935); +#476933 = CARTESIAN_POINT('',(125.68364122558,-121.38,-7.5E-02)); +#476934 = DIRECTION('',(0.,0.,-1.)); +#476935 = DIRECTION('',(-3.759794016836E-06,0.999999999993,-0.)); +#476936 = ORIENTED_EDGE('',*,*,#476937,.T.); +#476937 = EDGE_CURVE('',#476929,#476910,#476938,.T.); +#476938 = LINE('',#476939,#476940); +#476939 = CARTESIAN_POINT('',(125.683641,-121.44,-7.5E-02)); +#476940 = VECTOR('',#476941,1.); +#476941 = DIRECTION('',(-1.,0.,0.)); +#476942 = PLANE('',#476943); +#476943 = AXIS2_PLACEMENT_3D('',#476944,#476945,#476946); +#476944 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476945 = DIRECTION('',(-0.,-0.,-1.)); +#476946 = DIRECTION('',(-1.,0.,0.)); +#476947 = SHELL_BASED_SURFACE_MODEL('',(#476948)); +#476948 = OPEN_SHELL('',(#476949)); +#476949 = ADVANCED_FACE('',(#476950),#476994,.T.); +#476950 = FACE_BOUND('',#476951,.T.); +#476951 = EDGE_LOOP('',(#476952,#476963,#476971,#476980,#476988)); +#476952 = ORIENTED_EDGE('',*,*,#476953,.T.); +#476953 = EDGE_CURVE('',#476954,#476956,#476958,.T.); +#476954 = VERTEX_POINT('',#476955); +#476955 = CARTESIAN_POINT('',(148.622067,-120.537039,-7.5E-02)); +#476956 = VERTEX_POINT('',#476957); +#476957 = CARTESIAN_POINT('',(148.7375,-120.56,-7.5E-02)); +#476958 = CIRCLE('',#476959,6.000007318649E-02); +#476959 = AXIS2_PLACEMENT_3D('',#476960,#476961,#476962); +#476960 = CARTESIAN_POINT('',(148.67749992681,-120.5599998233,-7.5E-02) + ); +#476961 = DIRECTION('',(0.,0.,-1.)); +#476962 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#476963 = ORIENTED_EDGE('',*,*,#476964,.T.); +#476964 = EDGE_CURVE('',#476956,#476965,#476967,.T.); +#476965 = VERTEX_POINT('',#476966); +#476966 = CARTESIAN_POINT('',(148.7375,-121.34,-7.5E-02)); +#476967 = LINE('',#476968,#476969); +#476968 = CARTESIAN_POINT('',(148.7375,-120.56,-7.5E-02)); +#476969 = VECTOR('',#476970,1.); +#476970 = DIRECTION('',(0.,-1.,0.)); +#476971 = ORIENTED_EDGE('',*,*,#476972,.T.); +#476972 = EDGE_CURVE('',#476965,#476973,#476975,.T.); +#476973 = VERTEX_POINT('',#476974); +#476974 = CARTESIAN_POINT('',(148.6175,-121.34,-7.5E-02)); +#476975 = CIRCLE('',#476976,6.000000000043E-02); +#476976 = AXIS2_PLACEMENT_3D('',#476977,#476978,#476979); +#476977 = CARTESIAN_POINT('',(148.6775,-121.3400002255,-7.5E-02)); +#476978 = DIRECTION('',(0.,0.,-1.)); +#476979 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#476980 = ORIENTED_EDGE('',*,*,#476981,.T.); +#476981 = EDGE_CURVE('',#476973,#476982,#476984,.T.); +#476982 = VERTEX_POINT('',#476983); +#476983 = CARTESIAN_POINT('',(148.6175,-120.56,-7.5E-02)); +#476984 = LINE('',#476985,#476986); +#476985 = CARTESIAN_POINT('',(148.6175,-121.34,-7.5E-02)); +#476986 = VECTOR('',#476987,1.); +#476987 = DIRECTION('',(0.,1.,0.)); +#476988 = ORIENTED_EDGE('',*,*,#476989,.T.); +#476989 = EDGE_CURVE('',#476982,#476954,#476990,.T.); +#476990 = LINE('',#476991,#476992); +#476991 = CARTESIAN_POINT('',(148.6175,-120.56,-7.5E-02)); +#476992 = VECTOR('',#476993,1.); +#476993 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#476994 = PLANE('',#476995); +#476995 = AXIS2_PLACEMENT_3D('',#476996,#476997,#476998); +#476996 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#476997 = DIRECTION('',(-0.,-0.,-1.)); +#476998 = DIRECTION('',(-1.,0.,0.)); +#476999 = SHELL_BASED_SURFACE_MODEL('',(#477000)); +#477000 = OPEN_SHELL('',(#477001)); +#477001 = ADVANCED_FACE('',(#477002),#477062,.T.); +#477002 = FACE_BOUND('',#477003,.T.); +#477003 = EDGE_LOOP('',(#477004,#477015,#477023,#477032,#477040,#477048, + #477056)); +#477004 = ORIENTED_EDGE('',*,*,#477005,.T.); +#477005 = EDGE_CURVE('',#477006,#477008,#477010,.T.); +#477006 = VERTEX_POINT('',#477007); +#477007 = CARTESIAN_POINT('',(147.848976,-121.03529,-7.5E-02)); +#477008 = VERTEX_POINT('',#477009); +#477009 = CARTESIAN_POINT('',(147.8975,-120.94,-7.5E-02)); +#477010 = CIRCLE('',#477011,5.999941814205E-02); +#477011 = AXIS2_PLACEMENT_3D('',#477012,#477013,#477014); +#477012 = CARTESIAN_POINT('',(147.89749924194,-120.9999994181,-7.5E-02) + ); +#477013 = DIRECTION('',(0.,0.,-1.)); +#477014 = DIRECTION('',(-0.808728541891,-0.588182068353,-0.)); +#477015 = ORIENTED_EDGE('',*,*,#477016,.T.); +#477016 = EDGE_CURVE('',#477008,#477017,#477019,.T.); +#477017 = VERTEX_POINT('',#477018); +#477018 = CARTESIAN_POINT('',(148.3775,-120.94,-7.5E-02)); +#477019 = LINE('',#477020,#477021); +#477020 = CARTESIAN_POINT('',(147.8975,-120.94,-7.5E-02)); +#477021 = VECTOR('',#477022,1.); +#477022 = DIRECTION('',(1.,0.,0.)); +#477023 = ORIENTED_EDGE('',*,*,#477024,.T.); +#477024 = EDGE_CURVE('',#477017,#477025,#477027,.T.); +#477025 = VERTEX_POINT('',#477026); +#477026 = CARTESIAN_POINT('',(148.426024,-121.03529,-7.5E-02)); +#477027 = CIRCLE('',#477028,6.000027696175E-02); +#477028 = AXIS2_PLACEMENT_3D('',#477029,#477030,#477031); +#477029 = CARTESIAN_POINT('',(148.37749907153,-121.0000002769,-7.5E-02) + ); +#477030 = DIRECTION('',(0.,0.,-1.)); +#477031 = DIRECTION('',(1.54744015912E-05,0.99999999988,0.)); +#477032 = ORIENTED_EDGE('',*,*,#477033,.T.); +#477033 = EDGE_CURVE('',#477025,#477034,#477036,.T.); +#477034 = VERTEX_POINT('',#477035); +#477035 = CARTESIAN_POINT('',(148.186024,-121.36529,-7.5E-02)); +#477036 = LINE('',#477037,#477038); +#477037 = CARTESIAN_POINT('',(148.426024,-121.03529,-7.5E-02)); +#477038 = VECTOR('',#477039,1.); +#477039 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#477040 = ORIENTED_EDGE('',*,*,#477041,.T.); +#477041 = EDGE_CURVE('',#477034,#477042,#477044,.T.); +#477042 = VERTEX_POINT('',#477043); +#477043 = CARTESIAN_POINT('',(148.146858,-121.389266,-7.5E-02)); +#477044 = LINE('',#477045,#477046); +#477045 = CARTESIAN_POINT('',(148.186024,-121.36529,-7.5E-02)); +#477046 = VECTOR('',#477047,1.); +#477047 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#477048 = ORIENTED_EDGE('',*,*,#477049,.T.); +#477049 = EDGE_CURVE('',#477042,#477050,#477052,.T.); +#477050 = VERTEX_POINT('',#477051); +#477051 = CARTESIAN_POINT('',(148.10221,-121.378524,-7.5E-02)); +#477052 = LINE('',#477053,#477054); +#477053 = CARTESIAN_POINT('',(148.146858,-121.389266,-7.5E-02)); +#477054 = VECTOR('',#477055,1.); +#477055 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#477056 = ORIENTED_EDGE('',*,*,#477057,.T.); +#477057 = EDGE_CURVE('',#477050,#477006,#477058,.T.); +#477058 = LINE('',#477059,#477060); +#477059 = CARTESIAN_POINT('',(148.10221,-121.378524,-7.5E-02)); +#477060 = VECTOR('',#477061,1.); +#477061 = DIRECTION('',(-0.593692353744,0.804692108267,0.)); +#477062 = PLANE('',#477063); +#477063 = AXIS2_PLACEMENT_3D('',#477064,#477065,#477066); +#477064 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477065 = DIRECTION('',(-0.,-0.,-1.)); +#477066 = DIRECTION('',(-1.,0.,0.)); +#477067 = SHELL_BASED_SURFACE_MODEL('',(#477068)); +#477068 = OPEN_SHELL('',(#477069)); +#477069 = ADVANCED_FACE('',(#477070),#477307,.T.); +#477070 = FACE_BOUND('',#477071,.T.); +#477071 = EDGE_LOOP('',(#477072,#477082,#477090,#477098,#477106,#477114, + #477122,#477130,#477138,#477146,#477154,#477162,#477170,#477178, + #477186,#477194,#477202,#477211,#477219,#477227,#477235,#477244, + #477252,#477261,#477269,#477277,#477285,#477293,#477301)); +#477072 = ORIENTED_EDGE('',*,*,#477073,.T.); +#477073 = EDGE_CURVE('',#477074,#477076,#477078,.T.); +#477074 = VERTEX_POINT('',#477075); +#477075 = CARTESIAN_POINT('',(151.582971,-120.716306,-7.5E-02)); +#477076 = VERTEX_POINT('',#477077); +#477077 = CARTESIAN_POINT('',(151.688443,-120.664901,-7.5E-02)); +#477078 = LINE('',#477079,#477080); +#477079 = CARTESIAN_POINT('',(151.582971,-120.716306,-7.5E-02)); +#477080 = VECTOR('',#477081,1.); +#477081 = DIRECTION('',(0.898918699137,0.438115478318,0.)); +#477082 = ORIENTED_EDGE('',*,*,#477083,.T.); +#477083 = EDGE_CURVE('',#477076,#477084,#477086,.T.); +#477084 = VERTEX_POINT('',#477085); +#477085 = CARTESIAN_POINT('',(151.891046,-120.615789,-7.5E-02)); +#477086 = LINE('',#477087,#477088); +#477087 = CARTESIAN_POINT('',(151.688443,-120.664901,-7.5E-02)); +#477088 = VECTOR('',#477089,1.); +#477089 = DIRECTION('',(0.97185436569,0.235582452421,0.)); +#477090 = ORIENTED_EDGE('',*,*,#477091,.T.); +#477091 = EDGE_CURVE('',#477084,#477092,#477094,.T.); +#477092 = VERTEX_POINT('',#477093); +#477093 = CARTESIAN_POINT('',(152.039912,-120.616984,-7.5E-02)); +#477094 = LINE('',#477095,#477096); +#477095 = CARTESIAN_POINT('',(151.891046,-120.615789,-7.5E-02)); +#477096 = VECTOR('',#477097,1.); +#477097 = DIRECTION('',(0.999967782355,-8.027094836364E-03,0.)); +#477098 = ORIENTED_EDGE('',*,*,#477099,.T.); +#477099 = EDGE_CURVE('',#477092,#477100,#477102,.T.); +#477100 = VERTEX_POINT('',#477101); +#477101 = CARTESIAN_POINT('',(152.24674,-120.668687,-7.5E-02)); +#477102 = LINE('',#477103,#477104); +#477103 = CARTESIAN_POINT('',(152.039912,-120.616984,-7.5E-02)); +#477104 = VECTOR('',#477105,1.); +#477105 = DIRECTION('',(0.970146914665,-0.242517966276,0.)); +#477106 = ORIENTED_EDGE('',*,*,#477107,.T.); +#477107 = EDGE_CURVE('',#477100,#477108,#477110,.T.); +#477108 = VERTEX_POINT('',#477109); +#477109 = CARTESIAN_POINT('',(152.354972,-120.725671,-7.5E-02)); +#477110 = LINE('',#477111,#477112); +#477111 = CARTESIAN_POINT('',(152.24674,-120.668687,-7.5E-02)); +#477112 = VECTOR('',#477113,1.); +#477113 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#477114 = ORIENTED_EDGE('',*,*,#477115,.T.); +#477115 = EDGE_CURVE('',#477108,#477116,#477118,.T.); +#477116 = VERTEX_POINT('',#477117); +#477117 = CARTESIAN_POINT('',(152.456599,-120.83047,-7.5E-02)); +#477118 = LINE('',#477119,#477120); +#477119 = CARTESIAN_POINT('',(152.354972,-120.725671,-7.5E-02)); +#477120 = VECTOR('',#477121,1.); +#477121 = DIRECTION('',(0.696158994836,-0.717887633206,0.)); +#477122 = ORIENTED_EDGE('',*,*,#477123,.T.); +#477123 = EDGE_CURVE('',#477116,#477124,#477126,.T.); +#477124 = VERTEX_POINT('',#477125); +#477125 = CARTESIAN_POINT('',(152.512475,-120.999122,-7.5E-02)); +#477126 = LINE('',#477127,#477128); +#477127 = CARTESIAN_POINT('',(152.456599,-120.83047,-7.5E-02)); +#477128 = VECTOR('',#477129,1.); +#477129 = DIRECTION('',(0.314498165035,-0.949258080919,0.)); +#477130 = ORIENTED_EDGE('',*,*,#477131,.T.); +#477131 = EDGE_CURVE('',#477124,#477132,#477134,.T.); +#477132 = VERTEX_POINT('',#477133); +#477133 = CARTESIAN_POINT('',(152.510121,-121.100996,-7.5E-02)); +#477134 = LINE('',#477135,#477136); +#477135 = CARTESIAN_POINT('',(152.512475,-120.999122,-7.5E-02)); +#477136 = VECTOR('',#477137,1.); +#477137 = DIRECTION('',(-2.310080897204E-02,-0.999733140705,0.)); +#477138 = ORIENTED_EDGE('',*,*,#477139,.T.); +#477139 = EDGE_CURVE('',#477132,#477140,#477142,.T.); +#477140 = VERTEX_POINT('',#477141); +#477141 = CARTESIAN_POINT('',(152.5,-121.1,-7.5E-02)); +#477142 = LINE('',#477143,#477144); +#477143 = CARTESIAN_POINT('',(152.510121,-121.100996,-7.5E-02)); +#477144 = VECTOR('',#477145,1.); +#477145 = DIRECTION('',(-0.995192698701,9.793616519187E-02,0.)); +#477146 = ORIENTED_EDGE('',*,*,#477147,.T.); +#477147 = EDGE_CURVE('',#477140,#477148,#477150,.T.); +#477148 = VERTEX_POINT('',#477149); +#477149 = CARTESIAN_POINT('',(152.470736,-121.102882,-7.5E-02)); +#477150 = LINE('',#477151,#477152); +#477151 = CARTESIAN_POINT('',(152.5,-121.1,-7.5E-02)); +#477152 = VECTOR('',#477153,1.); +#477153 = DIRECTION('',(-0.995185563998,-9.800863844454E-02,0.)); +#477154 = ORIENTED_EDGE('',*,*,#477155,.T.); +#477155 = EDGE_CURVE('',#477148,#477156,#477158,.T.); +#477156 = VERTEX_POINT('',#477157); +#477157 = CARTESIAN_POINT('',(152.416664,-121.12528,-7.5E-02)); +#477158 = LINE('',#477159,#477160); +#477159 = CARTESIAN_POINT('',(152.470736,-121.102882,-7.5E-02)); +#477160 = VECTOR('',#477161,1.); +#477161 = DIRECTION('',(-0.923875640631,-0.38269282806,0.)); +#477162 = ORIENTED_EDGE('',*,*,#477163,.T.); +#477163 = EDGE_CURVE('',#477156,#477164,#477166,.T.); +#477164 = VERTEX_POINT('',#477165); +#477165 = CARTESIAN_POINT('',(152.390863,-121.15108,-7.5E-02)); +#477166 = LINE('',#477167,#477168); +#477167 = CARTESIAN_POINT('',(152.416664,-121.12528,-7.5E-02)); +#477168 = VECTOR('',#477169,1.); +#477169 = DIRECTION('',(-0.707120484408,-0.707093077699,0.)); +#477170 = ORIENTED_EDGE('',*,*,#477171,.T.); +#477171 = EDGE_CURVE('',#477164,#477172,#477174,.T.); +#477172 = VERTEX_POINT('',#477173); +#477173 = CARTESIAN_POINT('',(152.412475,-121.086247,-7.5E-02)); +#477174 = LINE('',#477175,#477176); +#477175 = CARTESIAN_POINT('',(152.390863,-121.15108,-7.5E-02)); +#477176 = VECTOR('',#477177,1.); +#477177 = DIRECTION('',(0.316240935376,0.948678908163,0.)); +#477178 = ORIENTED_EDGE('',*,*,#477179,.T.); +#477179 = EDGE_CURVE('',#477172,#477180,#477182,.T.); +#477180 = VERTEX_POINT('',#477181); +#477181 = CARTESIAN_POINT('',(152.412475,-121.007235,-7.5E-02)); +#477182 = LINE('',#477183,#477184); +#477183 = CARTESIAN_POINT('',(152.412475,-121.086247,-7.5E-02)); +#477184 = VECTOR('',#477185,1.); +#477185 = DIRECTION('',(0.,1.,0.)); +#477186 = ORIENTED_EDGE('',*,*,#477187,.T.); +#477187 = EDGE_CURVE('',#477180,#477188,#477190,.T.); +#477188 = VERTEX_POINT('',#477189); +#477189 = CARTESIAN_POINT('',(152.371155,-120.883275,-7.5E-02)); +#477190 = LINE('',#477191,#477192); +#477191 = CARTESIAN_POINT('',(152.412475,-121.007235,-7.5E-02)); +#477192 = VECTOR('',#477193,1.); +#477193 = DIRECTION('',(-0.316227766017,0.94868329805,0.)); +#477194 = ORIENTED_EDGE('',*,*,#477195,.T.); +#477195 = EDGE_CURVE('',#477188,#477196,#477198,.T.); +#477196 = VERTEX_POINT('',#477197); +#477197 = CARTESIAN_POINT('',(152.289998,-120.802119,-7.5E-02)); +#477198 = LINE('',#477199,#477200); +#477199 = CARTESIAN_POINT('',(152.371155,-120.883275,-7.5E-02)); +#477200 = VECTOR('',#477201,1.); +#477201 = DIRECTION('',(-0.707111137613,0.707102424734,0.)); +#477202 = ORIENTED_EDGE('',*,*,#477203,.T.); +#477203 = EDGE_CURVE('',#477196,#477204,#477206,.T.); +#477204 = VERTEX_POINT('',#477205); +#477205 = CARTESIAN_POINT('',(151.897201,-120.715789,-7.5E-02)); +#477206 = CIRCLE('',#477207,0.639216739851); +#477207 = AXIS2_PLACEMENT_3D('',#477208,#477209,#477210); +#477208 = CARTESIAN_POINT('',(151.96335193559,-121.3515736288,-7.5E-02) + ); +#477209 = DIRECTION('',(0.,0.,1.)); +#477210 = DIRECTION('',(0.511009871986,0.859574843008,-0.)); +#477211 = ORIENTED_EDGE('',*,*,#477212,.T.); +#477212 = EDGE_CURVE('',#477204,#477213,#477215,.T.); +#477213 = VERTEX_POINT('',#477214); +#477214 = CARTESIAN_POINT('',(151.718022,-120.760583,-7.5E-02)); +#477215 = LINE('',#477216,#477217); +#477216 = CARTESIAN_POINT('',(151.897201,-120.715789,-7.5E-02)); +#477217 = VECTOR('',#477218,1.); +#477218 = DIRECTION('',(-0.970143455617,-0.242531803118,0.)); +#477219 = ORIENTED_EDGE('',*,*,#477220,.T.); +#477220 = EDGE_CURVE('',#477213,#477221,#477223,.T.); +#477221 = VERTEX_POINT('',#477222); +#477222 = CARTESIAN_POINT('',(151.634948,-120.80212,-7.5E-02)); +#477223 = LINE('',#477224,#477225); +#477224 = CARTESIAN_POINT('',(151.718022,-120.760583,-7.5E-02)); +#477225 = VECTOR('',#477226,1.); +#477226 = DIRECTION('',(-0.894427191,-0.4472135955,0.)); +#477227 = ORIENTED_EDGE('',*,*,#477228,.T.); +#477228 = EDGE_CURVE('',#477221,#477229,#477231,.T.); +#477229 = VERTEX_POINT('',#477230); +#477230 = CARTESIAN_POINT('',(151.553795,-120.883273,-7.5E-02)); +#477231 = LINE('',#477232,#477233); +#477232 = CARTESIAN_POINT('',(151.634948,-120.80212,-7.5E-02)); +#477233 = VECTOR('',#477234,1.); +#477234 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#477235 = ORIENTED_EDGE('',*,*,#477236,.T.); +#477236 = EDGE_CURVE('',#477229,#477237,#477239,.T.); +#477237 = VERTEX_POINT('',#477238); +#477238 = CARTESIAN_POINT('',(151.553795,-121.210208,-7.5E-02)); +#477239 = CIRCLE('',#477240,0.327515752221); +#477240 = AXIS2_PLACEMENT_3D('',#477241,#477242,#477243); +#477241 = CARTESIAN_POINT('',(151.83759941222,-121.0467405,-7.5E-02)); +#477242 = DIRECTION('',(0.,0.,1.)); +#477243 = DIRECTION('',(-0.866536678915,0.499113398032,0.)); +#477244 = ORIENTED_EDGE('',*,*,#477245,.T.); +#477245 = EDGE_CURVE('',#477237,#477246,#477248,.T.); +#477246 = VERTEX_POINT('',#477247); +#477247 = CARTESIAN_POINT('',(151.603907,-121.265701,-7.5E-02)); +#477248 = LINE('',#477249,#477250); +#477249 = CARTESIAN_POINT('',(151.553795,-121.210208,-7.5E-02)); +#477250 = VECTOR('',#477251,1.); +#477251 = DIRECTION('',(0.67020737329,-0.742173885816,0.)); +#477252 = ORIENTED_EDGE('',*,*,#477253,.T.); +#477253 = EDGE_CURVE('',#477246,#477254,#477256,.T.); +#477254 = VERTEX_POINT('',#477255); +#477255 = CARTESIAN_POINT('',(151.538578,-121.33103,-7.5E-02)); +#477256 = CIRCLE('',#477257,5.000060920129E-02); +#477257 = AXIS2_PLACEMENT_3D('',#477258,#477259,#477260); +#477258 = CARTESIAN_POINT('',(151.5577125,-121.2848355,-7.5E-02)); +#477259 = DIRECTION('',(0.,0.,-1.)); +#477260 = DIRECTION('',(0.923878743438,0.382685337352,0.)); +#477261 = ORIENTED_EDGE('',*,*,#477262,.T.); +#477262 = EDGE_CURVE('',#477254,#477263,#477265,.T.); +#477263 = VERTEX_POINT('',#477264); +#477264 = CARTESIAN_POINT('',(151.474739,-121.272572,-7.5E-02)); +#477265 = LINE('',#477266,#477267); +#477266 = CARTESIAN_POINT('',(151.538578,-121.33103,-7.5E-02)); +#477267 = VECTOR('',#477268,1.); +#477268 = DIRECTION('',(-0.737505544246,0.675341078424,0.)); +#477269 = ORIENTED_EDGE('',*,*,#477270,.T.); +#477270 = EDGE_CURVE('',#477263,#477271,#477273,.T.); +#477271 = VERTEX_POINT('',#477272); +#477272 = CARTESIAN_POINT('',(151.46266,-121.253028,-7.5E-02)); +#477273 = LINE('',#477274,#477275); +#477274 = CARTESIAN_POINT('',(151.474739,-121.272572,-7.5E-02)); +#477275 = VECTOR('',#477276,1.); +#477276 = DIRECTION('',(-0.525735638669,0.850648010774,0.)); +#477277 = ORIENTED_EDGE('',*,*,#477278,.T.); +#477278 = EDGE_CURVE('',#477271,#477279,#477281,.T.); +#477279 = VERTEX_POINT('',#477280); +#477280 = CARTESIAN_POINT('',(151.412475,-121.09436,-7.5E-02)); +#477281 = LINE('',#477282,#477283); +#477282 = CARTESIAN_POINT('',(151.46266,-121.253028,-7.5E-02)); +#477283 = VECTOR('',#477284,1.); +#477284 = DIRECTION('',(-0.301564730907,0.953445705362,0.)); +#477285 = ORIENTED_EDGE('',*,*,#477286,.T.); +#477286 = EDGE_CURVE('',#477279,#477287,#477289,.T.); +#477287 = VERTEX_POINT('',#477288); +#477288 = CARTESIAN_POINT('',(151.415041,-120.983311,-7.5E-02)); +#477289 = LINE('',#477290,#477291); +#477290 = CARTESIAN_POINT('',(151.412475,-121.09436,-7.5E-02)); +#477291 = VECTOR('',#477292,1.); +#477292 = DIRECTION('',(2.31007505022E-02,0.999733142057,0.)); +#477293 = ORIENTED_EDGE('',*,*,#477294,.T.); +#477294 = EDGE_CURVE('',#477287,#477295,#477297,.T.); +#477295 = VERTEX_POINT('',#477296); +#477296 = CARTESIAN_POINT('',(151.468353,-120.830466,-7.5E-02)); +#477297 = LINE('',#477298,#477299); +#477298 = CARTESIAN_POINT('',(151.415041,-120.983311,-7.5E-02)); +#477299 = VECTOR('',#477300,1.); +#477300 = DIRECTION('',(0.329338983659,0.94421175265,0.)); +#477301 = ORIENTED_EDGE('',*,*,#477302,.T.); +#477302 = EDGE_CURVE('',#477295,#477074,#477303,.T.); +#477303 = LINE('',#477304,#477305); +#477304 = CARTESIAN_POINT('',(151.468353,-120.830466,-7.5E-02)); +#477305 = VECTOR('',#477306,1.); +#477306 = DIRECTION('',(0.708520947272,0.705689781191,0.)); +#477307 = PLANE('',#477308); +#477308 = AXIS2_PLACEMENT_3D('',#477309,#477310,#477311); +#477309 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477310 = DIRECTION('',(-0.,-0.,-1.)); +#477311 = DIRECTION('',(-1.,0.,0.)); +#477312 = SHELL_BASED_SURFACE_MODEL('',(#477313)); +#477313 = OPEN_SHELL('',(#477314)); +#477314 = ADVANCED_FACE('',(#477315),#477365,.T.); +#477315 = FACE_BOUND('',#477316,.T.); +#477316 = EDGE_LOOP('',(#477317,#477327,#477335,#477343,#477351,#477359) + ); +#477317 = ORIENTED_EDGE('',*,*,#477318,.T.); +#477318 = EDGE_CURVE('',#477319,#477321,#477323,.T.); +#477319 = VERTEX_POINT('',#477320); +#477320 = CARTESIAN_POINT('',(152.321042,-121.30397,-7.5E-02)); +#477321 = VERTEX_POINT('',#477322); +#477322 = CARTESIAN_POINT('',(152.321042,-121.265701,-7.5E-02)); +#477323 = LINE('',#477324,#477325); +#477324 = CARTESIAN_POINT('',(152.321042,-121.30397,-7.5E-02)); +#477325 = VECTOR('',#477326,1.); +#477326 = DIRECTION('',(0.,1.,0.)); +#477327 = ORIENTED_EDGE('',*,*,#477328,.T.); +#477328 = EDGE_CURVE('',#477321,#477329,#477331,.T.); +#477329 = VERTEX_POINT('',#477330); +#477330 = CARTESIAN_POINT('',(152.352882,-121.230441,-7.5E-02)); +#477331 = LINE('',#477332,#477333); +#477332 = CARTESIAN_POINT('',(152.321042,-121.265701,-7.5E-02)); +#477333 = VECTOR('',#477334,1.); +#477334 = DIRECTION('',(0.670196508823,0.742183696643,0.)); +#477335 = ORIENTED_EDGE('',*,*,#477336,.T.); +#477336 = EDGE_CURVE('',#477329,#477337,#477339,.T.); +#477337 = VERTEX_POINT('',#477338); +#477338 = CARTESIAN_POINT('',(152.352882,-121.279264,-7.5E-02)); +#477339 = LINE('',#477340,#477341); +#477340 = CARTESIAN_POINT('',(152.352882,-121.230441,-7.5E-02)); +#477341 = VECTOR('',#477342,1.); +#477342 = DIRECTION('',(0.,-1.,0.)); +#477343 = ORIENTED_EDGE('',*,*,#477344,.T.); +#477344 = EDGE_CURVE('',#477337,#477345,#477347,.T.); +#477345 = VERTEX_POINT('',#477346); +#477346 = CARTESIAN_POINT('',(152.374325,-121.33103,-7.5E-02)); +#477347 = LINE('',#477348,#477349); +#477348 = CARTESIAN_POINT('',(152.352882,-121.279264,-7.5E-02)); +#477349 = VECTOR('',#477350,1.); +#477350 = DIRECTION('',(0.382695934903,-0.923874353691,0.)); +#477351 = ORIENTED_EDGE('',*,*,#477352,.T.); +#477352 = EDGE_CURVE('',#477345,#477353,#477355,.T.); +#477353 = VERTEX_POINT('',#477354); +#477354 = CARTESIAN_POINT('',(152.348101,-121.33103,-7.5E-02)); +#477355 = LINE('',#477356,#477357); +#477356 = CARTESIAN_POINT('',(152.374325,-121.33103,-7.5E-02)); +#477357 = VECTOR('',#477358,1.); +#477358 = DIRECTION('',(-1.,0.,0.)); +#477359 = ORIENTED_EDGE('',*,*,#477360,.T.); +#477360 = EDGE_CURVE('',#477353,#477319,#477361,.T.); +#477361 = LINE('',#477362,#477363); +#477362 = CARTESIAN_POINT('',(152.348101,-121.33103,-7.5E-02)); +#477363 = VECTOR('',#477364,1.); +#477364 = DIRECTION('',(-0.707093715289,0.707119846843,0.)); +#477365 = PLANE('',#477366); +#477366 = AXIS2_PLACEMENT_3D('',#477367,#477368,#477369); +#477367 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477368 = DIRECTION('',(-0.,-0.,-1.)); +#477369 = DIRECTION('',(-1.,0.,0.)); +#477370 = SHELL_BASED_SURFACE_MODEL('',(#477371)); +#477371 = OPEN_SHELL('',(#477372)); +#477372 = ADVANCED_FACE('',(#477373),#477409,.T.); +#477373 = FACE_BOUND('',#477374,.T.); +#477374 = EDGE_LOOP('',(#477375,#477386,#477394,#477403)); +#477375 = ORIENTED_EDGE('',*,*,#477376,.T.); +#477376 = EDGE_CURVE('',#477377,#477379,#477381,.T.); +#477377 = VERTEX_POINT('',#477378); +#477378 = CARTESIAN_POINT('',(137.188748,-121.295,-7.5E-02)); +#477379 = VERTEX_POINT('',#477380); +#477380 = CARTESIAN_POINT('',(137.188748,-121.175,-7.5E-02)); +#477381 = CIRCLE('',#477382,6.000000000043E-02); +#477382 = AXIS2_PLACEMENT_3D('',#477383,#477384,#477385); +#477383 = CARTESIAN_POINT('',(137.18874777441,-121.235,-7.5E-02)); +#477384 = DIRECTION('',(0.,0.,-1.)); +#477385 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#477386 = ORIENTED_EDGE('',*,*,#477387,.T.); +#477387 = EDGE_CURVE('',#477379,#477388,#477390,.T.); +#477388 = VERTEX_POINT('',#477389); +#477389 = CARTESIAN_POINT('',(137.711252,-121.175,-7.5E-02)); +#477390 = LINE('',#477391,#477392); +#477391 = CARTESIAN_POINT('',(137.188748,-121.175,-7.5E-02)); +#477392 = VECTOR('',#477393,1.); +#477393 = DIRECTION('',(1.,0.,0.)); +#477394 = ORIENTED_EDGE('',*,*,#477395,.T.); +#477395 = EDGE_CURVE('',#477388,#477396,#477398,.T.); +#477396 = VERTEX_POINT('',#477397); +#477397 = CARTESIAN_POINT('',(137.711252,-121.295,-7.5E-02)); +#477398 = CIRCLE('',#477399,6.000000000043E-02); +#477399 = AXIS2_PLACEMENT_3D('',#477400,#477401,#477402); +#477400 = CARTESIAN_POINT('',(137.71125222558,-121.235,-7.5E-02)); +#477401 = DIRECTION('',(0.,0.,-1.)); +#477402 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#477403 = ORIENTED_EDGE('',*,*,#477404,.T.); +#477404 = EDGE_CURVE('',#477396,#477377,#477405,.T.); +#477405 = LINE('',#477406,#477407); +#477406 = CARTESIAN_POINT('',(137.711252,-121.295,-7.5E-02)); +#477407 = VECTOR('',#477408,1.); +#477408 = DIRECTION('',(-1.,0.,0.)); +#477409 = PLANE('',#477410); +#477410 = AXIS2_PLACEMENT_3D('',#477411,#477412,#477413); +#477411 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477412 = DIRECTION('',(-0.,-0.,-1.)); +#477413 = DIRECTION('',(-1.,0.,0.)); +#477414 = SHELL_BASED_SURFACE_MODEL('',(#477415)); +#477415 = OPEN_SHELL('',(#477416)); +#477416 = ADVANCED_FACE('',(#477417),#477453,.T.); +#477417 = FACE_BOUND('',#477418,.T.); +#477418 = EDGE_LOOP('',(#477419,#477430,#477438,#477447)); +#477419 = ORIENTED_EDGE('',*,*,#477420,.T.); +#477420 = EDGE_CURVE('',#477421,#477423,#477425,.T.); +#477421 = VERTEX_POINT('',#477422); +#477422 = CARTESIAN_POINT('',(125.376359,-120.68,-7.5E-02)); +#477423 = VERTEX_POINT('',#477424); +#477424 = CARTESIAN_POINT('',(125.376359,-120.56,-7.5E-02)); +#477425 = CIRCLE('',#477426,6.000000000042E-02); +#477426 = AXIS2_PLACEMENT_3D('',#477427,#477428,#477429); +#477427 = CARTESIAN_POINT('',(125.37635877441,-120.62,-7.5E-02)); +#477428 = DIRECTION('',(0.,0.,-1.)); +#477429 = DIRECTION('',(3.759794016836E-06,-0.999999999993,0.)); +#477430 = ORIENTED_EDGE('',*,*,#477431,.T.); +#477431 = EDGE_CURVE('',#477423,#477432,#477434,.T.); +#477432 = VERTEX_POINT('',#477433); +#477433 = CARTESIAN_POINT('',(125.683641,-120.56,-7.5E-02)); +#477434 = LINE('',#477435,#477436); +#477435 = CARTESIAN_POINT('',(125.376359,-120.56,-7.5E-02)); +#477436 = VECTOR('',#477437,1.); +#477437 = DIRECTION('',(1.,0.,0.)); +#477438 = ORIENTED_EDGE('',*,*,#477439,.T.); +#477439 = EDGE_CURVE('',#477432,#477440,#477442,.T.); +#477440 = VERTEX_POINT('',#477441); +#477441 = CARTESIAN_POINT('',(125.683641,-120.68,-7.5E-02)); +#477442 = CIRCLE('',#477443,6.000000000043E-02); +#477443 = AXIS2_PLACEMENT_3D('',#477444,#477445,#477446); +#477444 = CARTESIAN_POINT('',(125.68364122558,-120.62,-7.5E-02)); +#477445 = DIRECTION('',(0.,0.,-1.)); +#477446 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#477447 = ORIENTED_EDGE('',*,*,#477448,.T.); +#477448 = EDGE_CURVE('',#477440,#477421,#477449,.T.); +#477449 = LINE('',#477450,#477451); +#477450 = CARTESIAN_POINT('',(125.683641,-120.68,-7.5E-02)); +#477451 = VECTOR('',#477452,1.); +#477452 = DIRECTION('',(-1.,0.,0.)); +#477453 = PLANE('',#477454); +#477454 = AXIS2_PLACEMENT_3D('',#477455,#477456,#477457); +#477455 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477456 = DIRECTION('',(-0.,-0.,-1.)); +#477457 = DIRECTION('',(-1.,0.,0.)); +#477458 = SHELL_BASED_SURFACE_MODEL('',(#477459)); +#477459 = OPEN_SHELL('',(#477460)); +#477460 = ADVANCED_FACE('',(#477461),#477559,.T.); +#477461 = FACE_BOUND('',#477462,.T.); +#477462 = EDGE_LOOP('',(#477463,#477473,#477481,#477489,#477497,#477505, + #477513,#477521,#477529,#477537,#477545,#477553)); +#477463 = ORIENTED_EDGE('',*,*,#477464,.T.); +#477464 = EDGE_CURVE('',#477465,#477467,#477469,.T.); +#477465 = VERTEX_POINT('',#477466); +#477466 = CARTESIAN_POINT('',(153.930986,-120.551416,-7.5E-02)); +#477467 = VERTEX_POINT('',#477468); +#477468 = CARTESIAN_POINT('',(153.989445,-120.487576,-7.5E-02)); +#477469 = LINE('',#477470,#477471); +#477470 = CARTESIAN_POINT('',(153.930986,-120.551416,-7.5E-02)); +#477471 = VECTOR('',#477472,1.); +#477472 = DIRECTION('',(0.675341608062,0.73750505925,0.)); +#477473 = ORIENTED_EDGE('',*,*,#477474,.T.); +#477474 = EDGE_CURVE('',#477467,#477475,#477477,.T.); +#477475 = VERTEX_POINT('',#477476); +#477476 = CARTESIAN_POINT('',(154.005666,-120.476738,-7.5E-02)); +#477477 = LINE('',#477478,#477479); +#477478 = CARTESIAN_POINT('',(153.989445,-120.487576,-7.5E-02)); +#477479 = VECTOR('',#477480,1.); +#477480 = DIRECTION('',(0.831482059726,0.555551603682,0.)); +#477481 = ORIENTED_EDGE('',*,*,#477482,.T.); +#477482 = EDGE_CURVE('',#477475,#477483,#477485,.T.); +#477483 = VERTEX_POINT('',#477484); +#477484 = CARTESIAN_POINT('',(154.043937,-120.47674,-7.5E-02)); +#477485 = LINE('',#477486,#477487); +#477486 = CARTESIAN_POINT('',(154.005666,-120.476738,-7.5E-02)); +#477487 = VECTOR('',#477488,1.); +#477488 = DIRECTION('',(0.999999998635,-5.225889071176E-05,0.)); +#477489 = ORIENTED_EDGE('',*,*,#477490,.T.); +#477490 = EDGE_CURVE('',#477483,#477491,#477493,.T.); +#477491 = VERTEX_POINT('',#477492); +#477492 = CARTESIAN_POINT('',(154.107774,-120.535195,-7.5E-02)); +#477493 = LINE('',#477494,#477495); +#477494 = CARTESIAN_POINT('',(154.043937,-120.47674,-7.5E-02)); +#477495 = VECTOR('',#477496,1.); +#477496 = DIRECTION('',(0.737512268459,-0.675333735181,0.)); +#477497 = ORIENTED_EDGE('',*,*,#477498,.T.); +#477498 = EDGE_CURVE('',#477491,#477499,#477501,.T.); +#477499 = VERTEX_POINT('',#477500); +#477500 = CARTESIAN_POINT('',(154.118613,-120.551417,-7.5E-02)); +#477501 = LINE('',#477502,#477503); +#477502 = CARTESIAN_POINT('',(154.107774,-120.535195,-7.5E-02)); +#477503 = VECTOR('',#477504,1.); +#477504 = DIRECTION('',(0.555563363344,-0.831474202432,0.)); +#477505 = ORIENTED_EDGE('',*,*,#477506,.T.); +#477506 = EDGE_CURVE('',#477499,#477507,#477509,.T.); +#477507 = VERTEX_POINT('',#477508); +#477508 = CARTESIAN_POINT('',(154.118613,-120.589686,-7.5E-02)); +#477509 = LINE('',#477510,#477511); +#477510 = CARTESIAN_POINT('',(154.118613,-120.551417,-7.5E-02)); +#477511 = VECTOR('',#477512,1.); +#477512 = DIRECTION('',(0.,-1.,0.)); +#477513 = ORIENTED_EDGE('',*,*,#477514,.T.); +#477514 = EDGE_CURVE('',#477507,#477515,#477517,.T.); +#477515 = VERTEX_POINT('',#477516); +#477516 = CARTESIAN_POINT('',(154.060155,-120.653525,-7.5E-02)); +#477517 = LINE('',#477518,#477519); +#477518 = CARTESIAN_POINT('',(154.118613,-120.589686,-7.5E-02)); +#477519 = VECTOR('',#477520,1.); +#477520 = DIRECTION('',(-0.675341078424,-0.737505544246,0.)); +#477521 = ORIENTED_EDGE('',*,*,#477522,.T.); +#477522 = EDGE_CURVE('',#477515,#477523,#477525,.T.); +#477523 = VERTEX_POINT('',#477524); +#477524 = CARTESIAN_POINT('',(154.043934,-120.664364,-7.5E-02)); +#477525 = LINE('',#477526,#477527); +#477526 = CARTESIAN_POINT('',(154.060155,-120.653525,-7.5E-02)); +#477527 = VECTOR('',#477528,1.); +#477528 = DIRECTION('',(-0.831458381235,-0.555587041132,0.)); +#477529 = ORIENTED_EDGE('',*,*,#477530,.T.); +#477530 = EDGE_CURVE('',#477523,#477531,#477533,.T.); +#477531 = VERTEX_POINT('',#477532); +#477532 = CARTESIAN_POINT('',(154.005666,-120.664364,-7.5E-02)); +#477533 = LINE('',#477534,#477535); +#477534 = CARTESIAN_POINT('',(154.043934,-120.664364,-7.5E-02)); +#477535 = VECTOR('',#477536,1.); +#477536 = DIRECTION('',(-1.,0.,0.)); +#477537 = ORIENTED_EDGE('',*,*,#477538,.T.); +#477538 = EDGE_CURVE('',#477531,#477539,#477541,.T.); +#477539 = VERTEX_POINT('',#477540); +#477540 = CARTESIAN_POINT('',(153.941825,-120.605907,-7.5E-02)); +#477541 = LINE('',#477542,#477543); +#477542 = CARTESIAN_POINT('',(154.005666,-120.664364,-7.5E-02)); +#477543 = VECTOR('',#477544,1.); +#477544 = DIRECTION('',(-0.737521835787,0.675323286832,0.)); +#477545 = ORIENTED_EDGE('',*,*,#477546,.T.); +#477546 = EDGE_CURVE('',#477539,#477547,#477549,.T.); +#477547 = VERTEX_POINT('',#477548); +#477548 = CARTESIAN_POINT('',(153.930986,-120.589686,-7.5E-02)); +#477549 = LINE('',#477550,#477551); +#477550 = CARTESIAN_POINT('',(153.941825,-120.605907,-7.5E-02)); +#477551 = VECTOR('',#477552,1.); +#477552 = DIRECTION('',(-0.555587041132,0.831458381235,0.)); +#477553 = ORIENTED_EDGE('',*,*,#477554,.T.); +#477554 = EDGE_CURVE('',#477547,#477465,#477555,.T.); +#477555 = LINE('',#477556,#477557); +#477556 = CARTESIAN_POINT('',(153.930986,-120.589686,-7.5E-02)); +#477557 = VECTOR('',#477558,1.); +#477558 = DIRECTION('',(0.,1.,0.)); +#477559 = PLANE('',#477560); +#477560 = AXIS2_PLACEMENT_3D('',#477561,#477562,#477563); +#477561 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477562 = DIRECTION('',(-0.,-0.,-1.)); +#477563 = DIRECTION('',(-1.,0.,0.)); +#477564 = SHELL_BASED_SURFACE_MODEL('',(#477565)); +#477565 = OPEN_SHELL('',(#477566)); +#477566 = ADVANCED_FACE('',(#477567),#477653,.T.); +#477567 = FACE_BOUND('',#477568,.T.); +#477568 = EDGE_LOOP('',(#477569,#477580,#477588,#477597,#477605,#477614, + #477622,#477630,#477638,#477647)); +#477569 = ORIENTED_EDGE('',*,*,#477570,.T.); +#477570 = EDGE_CURVE('',#477571,#477573,#477575,.T.); +#477571 = VERTEX_POINT('',#477572); +#477572 = CARTESIAN_POINT('',(148.6175,-119.39,-7.5E-02)); +#477573 = VERTEX_POINT('',#477574); +#477574 = CARTESIAN_POINT('',(148.6775,-119.33,-7.5E-02)); +#477575 = CIRCLE('',#477576,5.999932016256E-02); +#477576 = AXIS2_PLACEMENT_3D('',#477577,#477578,#477579); +#477577 = CARTESIAN_POINT('',(148.67749932015,-119.3899993201,-7.5E-02) + ); +#477578 = DIRECTION('',(0.,0.,-1.)); +#477579 = DIRECTION('',(-0.999999999936,-1.133081659513E-05,-0.)); +#477580 = ORIENTED_EDGE('',*,*,#477581,.T.); +#477581 = EDGE_CURVE('',#477573,#477582,#477584,.T.); +#477582 = VERTEX_POINT('',#477583); +#477583 = CARTESIAN_POINT('',(150.1975,-119.33,-7.5E-02)); +#477584 = LINE('',#477585,#477586); +#477585 = CARTESIAN_POINT('',(148.6775,-119.33,-7.5E-02)); +#477586 = VECTOR('',#477587,1.); +#477587 = DIRECTION('',(1.,0.,0.)); +#477588 = ORIENTED_EDGE('',*,*,#477589,.T.); +#477589 = EDGE_CURVE('',#477582,#477590,#477592,.T.); +#477590 = VERTEX_POINT('',#477591); +#477591 = CARTESIAN_POINT('',(150.2575,-119.39,-7.5E-02)); +#477592 = CIRCLE('',#477593,5.999932016262E-02); +#477593 = AXIS2_PLACEMENT_3D('',#477594,#477595,#477596); +#477594 = CARTESIAN_POINT('',(150.19750067984,-119.3899993201,-7.5E-02) + ); +#477595 = DIRECTION('',(0.,0.,-1.)); +#477596 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#477597 = ORIENTED_EDGE('',*,*,#477598,.T.); +#477598 = EDGE_CURVE('',#477590,#477599,#477601,.T.); +#477599 = VERTEX_POINT('',#477600); +#477600 = CARTESIAN_POINT('',(150.2575,-120.39,-7.5E-02)); +#477601 = LINE('',#477602,#477603); +#477602 = CARTESIAN_POINT('',(150.2575,-119.39,-7.5E-02)); +#477603 = VECTOR('',#477604,1.); +#477604 = DIRECTION('',(0.,-1.,0.)); +#477605 = ORIENTED_EDGE('',*,*,#477606,.T.); +#477606 = EDGE_CURVE('',#477599,#477607,#477609,.T.); +#477607 = VERTEX_POINT('',#477608); +#477608 = CARTESIAN_POINT('',(150.1375,-120.39,-7.5E-02)); +#477609 = CIRCLE('',#477610,6.000000000043E-02); +#477610 = AXIS2_PLACEMENT_3D('',#477611,#477612,#477613); +#477611 = CARTESIAN_POINT('',(150.1975,-120.3900002255,-7.5E-02)); +#477612 = DIRECTION('',(0.,0.,-1.)); +#477613 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#477614 = ORIENTED_EDGE('',*,*,#477615,.T.); +#477615 = EDGE_CURVE('',#477607,#477616,#477618,.T.); +#477616 = VERTEX_POINT('',#477617); +#477617 = CARTESIAN_POINT('',(150.1375,-119.45,-7.5E-02)); +#477618 = LINE('',#477619,#477620); +#477619 = CARTESIAN_POINT('',(150.1375,-120.39,-7.5E-02)); +#477620 = VECTOR('',#477621,1.); +#477621 = DIRECTION('',(0.,1.,0.)); +#477622 = ORIENTED_EDGE('',*,*,#477623,.T.); +#477623 = EDGE_CURVE('',#477616,#477624,#477626,.T.); +#477624 = VERTEX_POINT('',#477625); +#477625 = CARTESIAN_POINT('',(148.735511,-119.45,-7.5E-02)); +#477626 = LINE('',#477627,#477628); +#477627 = CARTESIAN_POINT('',(150.1375,-119.45,-7.5E-02)); +#477628 = VECTOR('',#477629,1.); +#477629 = DIRECTION('',(-1.,0.,0.)); +#477630 = ORIENTED_EDGE('',*,*,#477631,.T.); +#477631 = EDGE_CURVE('',#477624,#477632,#477634,.T.); +#477632 = VERTEX_POINT('',#477633); +#477633 = CARTESIAN_POINT('',(148.732933,-119.462961,-7.5E-02)); +#477634 = LINE('',#477635,#477636); +#477635 = CARTESIAN_POINT('',(148.735511,-119.45,-7.5E-02)); +#477636 = VECTOR('',#477637,1.); +#477637 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#477638 = ORIENTED_EDGE('',*,*,#477639,.T.); +#477639 = EDGE_CURVE('',#477632,#477640,#477642,.T.); +#477640 = VERTEX_POINT('',#477641); +#477641 = CARTESIAN_POINT('',(148.6175,-119.44,-7.5E-02)); +#477642 = CIRCLE('',#477643,6.000007318647E-02); +#477643 = AXIS2_PLACEMENT_3D('',#477644,#477645,#477646); +#477644 = CARTESIAN_POINT('',(148.67750007318,-119.4400001766,-7.5E-02) + ); +#477645 = DIRECTION('',(-0.,0.,-1.)); +#477646 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#477647 = ORIENTED_EDGE('',*,*,#477648,.T.); +#477648 = EDGE_CURVE('',#477640,#477571,#477649,.T.); +#477649 = LINE('',#477650,#477651); +#477650 = CARTESIAN_POINT('',(148.6175,-119.44,-7.5E-02)); +#477651 = VECTOR('',#477652,1.); +#477652 = DIRECTION('',(0.,1.,0.)); +#477653 = PLANE('',#477654); +#477654 = AXIS2_PLACEMENT_3D('',#477655,#477656,#477657); +#477655 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477656 = DIRECTION('',(-0.,-0.,-1.)); +#477657 = DIRECTION('',(-1.,0.,0.)); +#477658 = SHELL_BASED_SURFACE_MODEL('',(#477659)); +#477659 = OPEN_SHELL('',(#477660)); +#477660 = ADVANCED_FACE('',(#477661),#477705,.T.); +#477661 = FACE_BOUND('',#477662,.T.); +#477662 = EDGE_LOOP('',(#477663,#477674,#477682,#477691,#477699)); +#477663 = ORIENTED_EDGE('',*,*,#477664,.T.); +#477664 = EDGE_CURVE('',#477665,#477667,#477669,.T.); +#477665 = VERTEX_POINT('',#477666); +#477666 = CARTESIAN_POINT('',(146.034567,-120.149203,-7.5E-02)); +#477667 = VERTEX_POINT('',#477668); +#477668 = CARTESIAN_POINT('',(146.15,-120.172164,-7.5E-02)); +#477669 = CIRCLE('',#477670,6.000007318647E-02); +#477670 = AXIS2_PLACEMENT_3D('',#477671,#477672,#477673); +#477671 = CARTESIAN_POINT('',(146.08999992681,-120.1721638233,-7.5E-02) + ); +#477672 = DIRECTION('',(0.,0.,-1.)); +#477673 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#477674 = ORIENTED_EDGE('',*,*,#477675,.T.); +#477675 = EDGE_CURVE('',#477667,#477676,#477678,.T.); +#477676 = VERTEX_POINT('',#477677); +#477677 = CARTESIAN_POINT('',(146.15,-120.387836,-7.5E-02)); +#477678 = LINE('',#477679,#477680); +#477679 = CARTESIAN_POINT('',(146.15,-120.172164,-7.5E-02)); +#477680 = VECTOR('',#477681,1.); +#477681 = DIRECTION('',(0.,-1.,0.)); +#477682 = ORIENTED_EDGE('',*,*,#477683,.T.); +#477683 = EDGE_CURVE('',#477676,#477684,#477686,.T.); +#477684 = VERTEX_POINT('',#477685); +#477685 = CARTESIAN_POINT('',(146.03,-120.387836,-7.5E-02)); +#477686 = CIRCLE('',#477687,6.000000000043E-02); +#477687 = AXIS2_PLACEMENT_3D('',#477688,#477689,#477690); +#477688 = CARTESIAN_POINT('',(146.09,-120.3878362255,-7.5E-02)); +#477689 = DIRECTION('',(0.,0.,-1.)); +#477690 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#477691 = ORIENTED_EDGE('',*,*,#477692,.T.); +#477692 = EDGE_CURVE('',#477684,#477693,#477695,.T.); +#477693 = VERTEX_POINT('',#477694); +#477694 = CARTESIAN_POINT('',(146.03,-120.172164,-7.5E-02)); +#477695 = LINE('',#477696,#477697); +#477696 = CARTESIAN_POINT('',(146.03,-120.387836,-7.5E-02)); +#477697 = VECTOR('',#477698,1.); +#477698 = DIRECTION('',(0.,1.,0.)); +#477699 = ORIENTED_EDGE('',*,*,#477700,.T.); +#477700 = EDGE_CURVE('',#477693,#477665,#477701,.T.); +#477701 = LINE('',#477702,#477703); +#477702 = CARTESIAN_POINT('',(146.03,-120.172164,-7.5E-02)); +#477703 = VECTOR('',#477704,1.); +#477704 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#477705 = PLANE('',#477706); +#477706 = AXIS2_PLACEMENT_3D('',#477707,#477708,#477709); +#477707 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477708 = DIRECTION('',(-0.,-0.,-1.)); +#477709 = DIRECTION('',(-1.,0.,0.)); +#477710 = SHELL_BASED_SURFACE_MODEL('',(#477711)); +#477711 = OPEN_SHELL('',(#477712)); +#477712 = ADVANCED_FACE('',(#477713),#477757,.T.); +#477713 = FACE_BOUND('',#477714,.T.); +#477714 = EDGE_LOOP('',(#477715,#477726,#477734,#477743,#477751)); +#477715 = ORIENTED_EDGE('',*,*,#477716,.T.); +#477716 = EDGE_CURVE('',#477717,#477719,#477721,.T.); +#477717 = VERTEX_POINT('',#477718); +#477718 = CARTESIAN_POINT('',(146.754567,-120.149203,-7.5E-02)); +#477719 = VERTEX_POINT('',#477720); +#477720 = CARTESIAN_POINT('',(146.87,-120.172164,-7.5E-02)); +#477721 = CIRCLE('',#477722,6.000007318647E-02); +#477722 = AXIS2_PLACEMENT_3D('',#477723,#477724,#477725); +#477723 = CARTESIAN_POINT('',(146.80999992681,-120.1721638233,-7.5E-02) + ); +#477724 = DIRECTION('',(0.,0.,-1.)); +#477725 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#477726 = ORIENTED_EDGE('',*,*,#477727,.T.); +#477727 = EDGE_CURVE('',#477719,#477728,#477730,.T.); +#477728 = VERTEX_POINT('',#477729); +#477729 = CARTESIAN_POINT('',(146.87,-120.387836,-7.5E-02)); +#477730 = LINE('',#477731,#477732); +#477731 = CARTESIAN_POINT('',(146.87,-120.172164,-7.5E-02)); +#477732 = VECTOR('',#477733,1.); +#477733 = DIRECTION('',(0.,-1.,0.)); +#477734 = ORIENTED_EDGE('',*,*,#477735,.T.); +#477735 = EDGE_CURVE('',#477728,#477736,#477738,.T.); +#477736 = VERTEX_POINT('',#477737); +#477737 = CARTESIAN_POINT('',(146.75,-120.387836,-7.5E-02)); +#477738 = CIRCLE('',#477739,6.000000000043E-02); +#477739 = AXIS2_PLACEMENT_3D('',#477740,#477741,#477742); +#477740 = CARTESIAN_POINT('',(146.81,-120.3878362255,-7.5E-02)); +#477741 = DIRECTION('',(0.,0.,-1.)); +#477742 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#477743 = ORIENTED_EDGE('',*,*,#477744,.T.); +#477744 = EDGE_CURVE('',#477736,#477745,#477747,.T.); +#477745 = VERTEX_POINT('',#477746); +#477746 = CARTESIAN_POINT('',(146.75,-120.172164,-7.5E-02)); +#477747 = LINE('',#477748,#477749); +#477748 = CARTESIAN_POINT('',(146.75,-120.387836,-7.5E-02)); +#477749 = VECTOR('',#477750,1.); +#477750 = DIRECTION('',(0.,1.,0.)); +#477751 = ORIENTED_EDGE('',*,*,#477752,.T.); +#477752 = EDGE_CURVE('',#477745,#477717,#477753,.T.); +#477753 = LINE('',#477754,#477755); +#477754 = CARTESIAN_POINT('',(146.75,-120.172164,-7.5E-02)); +#477755 = VECTOR('',#477756,1.); +#477756 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#477757 = PLANE('',#477758); +#477758 = AXIS2_PLACEMENT_3D('',#477759,#477760,#477761); +#477759 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477760 = DIRECTION('',(-0.,-0.,-1.)); +#477761 = DIRECTION('',(-1.,0.,0.)); +#477762 = SHELL_BASED_SURFACE_MODEL('',(#477763)); +#477763 = OPEN_SHELL('',(#477764)); +#477764 = ADVANCED_FACE('',(#477765),#477801,.T.); +#477765 = FACE_BOUND('',#477766,.T.); +#477766 = EDGE_LOOP('',(#477767,#477778,#477786,#477795)); +#477767 = ORIENTED_EDGE('',*,*,#477768,.T.); +#477768 = EDGE_CURVE('',#477769,#477771,#477773,.T.); +#477769 = VERTEX_POINT('',#477770); +#477770 = CARTESIAN_POINT('',(128.256359,-120.44,-7.5E-02)); +#477771 = VERTEX_POINT('',#477772); +#477772 = CARTESIAN_POINT('',(128.256359,-120.32,-7.5E-02)); +#477773 = CIRCLE('',#477774,6.000000000042E-02); +#477774 = AXIS2_PLACEMENT_3D('',#477775,#477776,#477777); +#477775 = CARTESIAN_POINT('',(128.25635877441,-120.38,-7.5E-02)); +#477776 = DIRECTION('',(0.,0.,-1.)); +#477777 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#477778 = ORIENTED_EDGE('',*,*,#477779,.T.); +#477779 = EDGE_CURVE('',#477771,#477780,#477782,.T.); +#477780 = VERTEX_POINT('',#477781); +#477781 = CARTESIAN_POINT('',(128.563641,-120.32,-7.5E-02)); +#477782 = LINE('',#477783,#477784); +#477783 = CARTESIAN_POINT('',(128.256359,-120.32,-7.5E-02)); +#477784 = VECTOR('',#477785,1.); +#477785 = DIRECTION('',(1.,0.,0.)); +#477786 = ORIENTED_EDGE('',*,*,#477787,.T.); +#477787 = EDGE_CURVE('',#477780,#477788,#477790,.T.); +#477788 = VERTEX_POINT('',#477789); +#477789 = CARTESIAN_POINT('',(128.563641,-120.44,-7.5E-02)); +#477790 = CIRCLE('',#477791,6.000000000042E-02); +#477791 = AXIS2_PLACEMENT_3D('',#477792,#477793,#477794); +#477792 = CARTESIAN_POINT('',(128.56364122558,-120.38,-7.5E-02)); +#477793 = DIRECTION('',(0.,0.,-1.)); +#477794 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#477795 = ORIENTED_EDGE('',*,*,#477796,.T.); +#477796 = EDGE_CURVE('',#477788,#477769,#477797,.T.); +#477797 = LINE('',#477798,#477799); +#477798 = CARTESIAN_POINT('',(128.563641,-120.44,-7.5E-02)); +#477799 = VECTOR('',#477800,1.); +#477800 = DIRECTION('',(-1.,0.,0.)); +#477801 = PLANE('',#477802); +#477802 = AXIS2_PLACEMENT_3D('',#477803,#477804,#477805); +#477803 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477804 = DIRECTION('',(-0.,-0.,-1.)); +#477805 = DIRECTION('',(-1.,0.,0.)); +#477806 = SHELL_BASED_SURFACE_MODEL('',(#477807)); +#477807 = OPEN_SHELL('',(#477808)); +#477808 = ADVANCED_FACE('',(#477809,#477926),#477994,.T.); +#477809 = FACE_BOUND('',#477810,.T.); +#477810 = EDGE_LOOP('',(#477811,#477822,#477830,#477839,#477847,#477855, + #477863,#477871,#477879,#477888,#477896,#477904,#477912,#477920)); +#477811 = ORIENTED_EDGE('',*,*,#477812,.T.); +#477812 = EDGE_CURVE('',#477813,#477815,#477817,.T.); +#477813 = VERTEX_POINT('',#477814); +#477814 = CARTESIAN_POINT('',(153.072419,-119.715789,-7.5E-02)); +#477815 = VERTEX_POINT('',#477816); +#477816 = CARTESIAN_POINT('',(153.072419,-119.615789,-7.5E-02)); +#477817 = CIRCLE('',#477818,5.000000000003E-02); +#477818 = AXIS2_PLACEMENT_3D('',#477819,#477820,#477821); +#477819 = CARTESIAN_POINT('',(153.07241904771,-119.665789,-7.5E-02)); +#477820 = DIRECTION('',(0.,0.,-1.)); +#477821 = DIRECTION('',(-9.542372936263E-07,-1.,-0.)); +#477822 = ORIENTED_EDGE('',*,*,#477823,.T.); +#477823 = EDGE_CURVE('',#477815,#477824,#477826,.T.); +#477824 = VERTEX_POINT('',#477825); +#477825 = CARTESIAN_POINT('',(154.072419,-119.615789,-7.5E-02)); +#477826 = LINE('',#477827,#477828); +#477827 = CARTESIAN_POINT('',(153.072419,-119.615789,-7.5E-02)); +#477828 = VECTOR('',#477829,1.); +#477829 = DIRECTION('',(1.,0.,0.)); +#477830 = ORIENTED_EDGE('',*,*,#477831,.T.); +#477831 = EDGE_CURVE('',#477824,#477832,#477834,.T.); +#477832 = VERTEX_POINT('',#477833); +#477833 = CARTESIAN_POINT('',(154.118613,-119.684923,-7.5E-02)); +#477834 = CIRCLE('',#477835,5.000005199708E-02); +#477835 = AXIS2_PLACEMENT_3D('',#477836,#477837,#477838); +#477836 = CARTESIAN_POINT('',(154.07241887447,-119.6657890519,-7.5E-02) + ); +#477837 = DIRECTION('',(0.,0.,-1.)); +#477838 = DIRECTION('',(2.510606922717E-06,0.999999999997,0.)); +#477839 = ORIENTED_EDGE('',*,*,#477840,.T.); +#477840 = EDGE_CURVE('',#477832,#477841,#477843,.T.); +#477841 = VERTEX_POINT('',#477842); +#477842 = CARTESIAN_POINT('',(154.099716,-119.703819,-7.5E-02)); +#477843 = LINE('',#477844,#477845); +#477844 = CARTESIAN_POINT('',(154.118613,-119.684923,-7.5E-02)); +#477845 = VECTOR('',#477846,1.); +#477846 = DIRECTION('',(-0.707125490933,-0.707088070945,0.)); +#477847 = ORIENTED_EDGE('',*,*,#477848,.T.); +#477848 = EDGE_CURVE('',#477841,#477849,#477851,.T.); +#477849 = VERTEX_POINT('',#477850); +#477850 = CARTESIAN_POINT('',(154.122293,-119.757482,-7.5E-02)); +#477851 = LINE('',#477852,#477853); +#477852 = CARTESIAN_POINT('',(154.099716,-119.703819,-7.5E-02)); +#477853 = VECTOR('',#477854,1.); +#477854 = DIRECTION('',(0.387795132833,-0.92174559123,0.)); +#477855 = ORIENTED_EDGE('',*,*,#477856,.T.); +#477856 = EDGE_CURVE('',#477849,#477857,#477859,.T.); +#477857 = VERTEX_POINT('',#477858); +#477858 = CARTESIAN_POINT('',(154.120176,-119.962775,-7.5E-02)); +#477859 = LINE('',#477860,#477861); +#477860 = CARTESIAN_POINT('',(154.122293,-119.757482,-7.5E-02)); +#477861 = VECTOR('',#477862,1.); +#477862 = DIRECTION('',(-1.031154227835E-02,-0.999946834635,0.)); +#477863 = ORIENTED_EDGE('',*,*,#477864,.T.); +#477864 = EDGE_CURVE('',#477857,#477865,#477867,.T.); +#477865 = VERTEX_POINT('',#477866); +#477866 = CARTESIAN_POINT('',(154.060155,-120.082097,-7.5E-02)); +#477867 = LINE('',#477868,#477869); +#477868 = CARTESIAN_POINT('',(154.120176,-119.962775,-7.5E-02)); +#477869 = VECTOR('',#477870,1.); +#477870 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#477871 = ORIENTED_EDGE('',*,*,#477872,.T.); +#477872 = EDGE_CURVE('',#477865,#477873,#477875,.T.); +#477873 = VERTEX_POINT('',#477874); +#477874 = CARTESIAN_POINT('',(153.99954,-120.139082,-7.5E-02)); +#477875 = LINE('',#477876,#477877); +#477876 = CARTESIAN_POINT('',(154.060155,-120.082097,-7.5E-02)); +#477877 = VECTOR('',#477878,1.); +#477878 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#477879 = ORIENTED_EDGE('',*,*,#477880,.T.); +#477880 = EDGE_CURVE('',#477873,#477881,#477883,.T.); +#477881 = VERTEX_POINT('',#477882); +#477882 = CARTESIAN_POINT('',(153.465634,-120.129715,-7.5E-02)); +#477883 = CIRCLE('',#477884,0.484201554455); +#477884 = AXIS2_PLACEMENT_3D('',#477885,#477886,#477887); +#477885 = CARTESIAN_POINT('',(153.73967270064,-119.730523397,-7.5E-02)); +#477886 = DIRECTION('',(-0.,0.,-1.)); +#477887 = DIRECTION('',(0.536692410345,-0.843777966457,-0.)); +#477888 = ORIENTED_EDGE('',*,*,#477889,.T.); +#477889 = EDGE_CURVE('',#477881,#477890,#477892,.T.); +#477890 = VERTEX_POINT('',#477891); +#477891 = CARTESIAN_POINT('',(153.408649,-120.069101,-7.5E-02)); +#477892 = LINE('',#477893,#477894); +#477893 = CARTESIAN_POINT('',(153.465634,-120.129715,-7.5E-02)); +#477894 = VECTOR('',#477895,1.); +#477895 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#477896 = ORIENTED_EDGE('',*,*,#477897,.T.); +#477897 = EDGE_CURVE('',#477890,#477898,#477900,.T.); +#477898 = VERTEX_POINT('',#477899); +#477899 = CARTESIAN_POINT('',(153.357994,-119.962775,-7.5E-02)); +#477900 = LINE('',#477901,#477902); +#477901 = CARTESIAN_POINT('',(153.408649,-120.069101,-7.5E-02)); +#477902 = VECTOR('',#477903,1.); +#477903 = DIRECTION('',(-0.430096717347,0.902782816478,0.)); +#477904 = ORIENTED_EDGE('',*,*,#477905,.T.); +#477905 = EDGE_CURVE('',#477898,#477906,#477908,.T.); +#477906 = VERTEX_POINT('',#477907); +#477907 = CARTESIAN_POINT('',(153.357994,-119.749754,-7.5E-02)); +#477908 = LINE('',#477909,#477910); +#477909 = CARTESIAN_POINT('',(153.357994,-119.962775,-7.5E-02)); +#477910 = VECTOR('',#477911,1.); +#477911 = DIRECTION('',(0.,1.,0.)); +#477912 = ORIENTED_EDGE('',*,*,#477913,.T.); +#477913 = EDGE_CURVE('',#477906,#477914,#477916,.T.); +#477914 = VERTEX_POINT('',#477915); +#477915 = CARTESIAN_POINT('',(153.372469,-119.715789,-7.5E-02)); +#477916 = LINE('',#477917,#477918); +#477917 = CARTESIAN_POINT('',(153.357994,-119.749754,-7.5E-02)); +#477918 = VECTOR('',#477919,1.); +#477919 = DIRECTION('',(0.39205522868,0.919941681665,0.)); +#477920 = ORIENTED_EDGE('',*,*,#477921,.T.); +#477921 = EDGE_CURVE('',#477914,#477813,#477922,.T.); +#477922 = LINE('',#477923,#477924); +#477923 = CARTESIAN_POINT('',(153.372469,-119.715789,-7.5E-02)); +#477924 = VECTOR('',#477925,1.); +#477925 = DIRECTION('',(-1.,0.,0.)); +#477926 = FACE_BOUND('',#477927,.T.); +#477927 = EDGE_LOOP('',(#477928,#477938,#477946,#477954,#477962,#477971, + #477979,#477988)); +#477928 = ORIENTED_EDGE('',*,*,#477929,.T.); +#477929 = EDGE_CURVE('',#477930,#477932,#477934,.T.); +#477930 = VERTEX_POINT('',#477931); +#477931 = CARTESIAN_POINT('',(154.022419,-119.77283,-7.5E-02)); +#477932 = VERTEX_POINT('',#477933); +#477933 = CARTESIAN_POINT('',(153.993898,-119.715789,-7.5E-02)); +#477934 = LINE('',#477935,#477936); +#477935 = CARTESIAN_POINT('',(154.022419,-119.77283,-7.5E-02)); +#477936 = VECTOR('',#477937,1.); +#477937 = DIRECTION('',(-0.447219867638,0.894424054904,0.)); +#477938 = ORIENTED_EDGE('',*,*,#477939,.T.); +#477939 = EDGE_CURVE('',#477932,#477940,#477942,.T.); +#477940 = VERTEX_POINT('',#477941); +#477941 = CARTESIAN_POINT('',(153.484273,-119.715789,-7.5E-02)); +#477942 = LINE('',#477943,#477944); +#477943 = CARTESIAN_POINT('',(153.993898,-119.715789,-7.5E-02)); +#477944 = VECTOR('',#477945,1.); +#477945 = DIRECTION('',(-1.,0.,0.)); +#477946 = ORIENTED_EDGE('',*,*,#477947,.T.); +#477947 = EDGE_CURVE('',#477940,#477948,#477950,.T.); +#477948 = VERTEX_POINT('',#477949); +#477949 = CARTESIAN_POINT('',(153.455752,-119.77283,-7.5E-02)); +#477950 = LINE('',#477951,#477952); +#477951 = CARTESIAN_POINT('',(153.484273,-119.715789,-7.5E-02)); +#477952 = VECTOR('',#477953,1.); +#477953 = DIRECTION('',(-0.447219867638,-0.894424054904,0.)); +#477954 = ORIENTED_EDGE('',*,*,#477955,.T.); +#477955 = EDGE_CURVE('',#477948,#477956,#477958,.T.); +#477956 = VERTEX_POINT('',#477957); +#477957 = CARTESIAN_POINT('',(153.455752,-119.9397,-7.5E-02)); +#477958 = LINE('',#477959,#477960); +#477959 = CARTESIAN_POINT('',(153.455752,-119.77283,-7.5E-02)); +#477960 = VECTOR('',#477961,1.); +#477961 = DIRECTION('',(0.,-1.,0.)); +#477962 = ORIENTED_EDGE('',*,*,#477963,.T.); +#477963 = EDGE_CURVE('',#477956,#477964,#477966,.T.); +#477964 = VERTEX_POINT('',#477965); +#477965 = CARTESIAN_POINT('',(153.608032,-120.091979,-7.5E-02)); +#477966 = CIRCLE('',#477967,0.215060459698); +#477967 = AXIS2_PLACEMENT_3D('',#477968,#477969,#477970); +#477968 = CARTESIAN_POINT('',(153.66352833746,-119.884202298,-7.5E-02)); +#477969 = DIRECTION('',(0.,0.,1.)); +#477970 = DIRECTION('',(-0.966129886234,-0.2580562786,0.)); +#477971 = ORIENTED_EDGE('',*,*,#477972,.T.); +#477972 = EDGE_CURVE('',#477964,#477973,#477975,.T.); +#477973 = VERTEX_POINT('',#477974); +#477974 = CARTESIAN_POINT('',(153.870139,-120.091979,-7.5E-02)); +#477975 = LINE('',#477976,#477977); +#477976 = CARTESIAN_POINT('',(153.608032,-120.091979,-7.5E-02)); +#477977 = VECTOR('',#477978,1.); +#477978 = DIRECTION('',(1.,0.,0.)); +#477979 = ORIENTED_EDGE('',*,*,#477980,.T.); +#477980 = EDGE_CURVE('',#477973,#477981,#477983,.T.); +#477981 = VERTEX_POINT('',#477982); +#477982 = CARTESIAN_POINT('',(154.022419,-119.939699,-7.5E-02)); +#477983 = CIRCLE('',#477984,0.215072998571); +#477984 = AXIS2_PLACEMENT_3D('',#477985,#477986,#477987); +#477985 = CARTESIAN_POINT('',(153.81463213236,-119.8841921323,-7.5E-02) + ); +#477986 = DIRECTION('',(0.,0.,1.)); +#477987 = DIRECTION('',(0.258083850599,-0.966122521247,0.)); +#477988 = ORIENTED_EDGE('',*,*,#477989,.T.); +#477989 = EDGE_CURVE('',#477981,#477930,#477990,.T.); +#477990 = LINE('',#477991,#477992); +#477991 = CARTESIAN_POINT('',(154.022419,-119.939699,-7.5E-02)); +#477992 = VECTOR('',#477993,1.); +#477993 = DIRECTION('',(0.,1.,0.)); +#477994 = PLANE('',#477995); +#477995 = AXIS2_PLACEMENT_3D('',#477996,#477997,#477998); +#477996 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#477997 = DIRECTION('',(-0.,-0.,-1.)); +#477998 = DIRECTION('',(-1.,0.,0.)); +#477999 = SHELL_BASED_SURFACE_MODEL('',(#478000)); +#478000 = OPEN_SHELL('',(#478001)); +#478001 = ADVANCED_FACE('',(#478002),#478038,.T.); +#478002 = FACE_BOUND('',#478003,.T.); +#478003 = EDGE_LOOP('',(#478004,#478015,#478023,#478032)); +#478004 = ORIENTED_EDGE('',*,*,#478005,.T.); +#478005 = EDGE_CURVE('',#478006,#478008,#478010,.T.); +#478006 = VERTEX_POINT('',#478007); +#478007 = CARTESIAN_POINT('',(137.188748,-119.825,-7.5E-02)); +#478008 = VERTEX_POINT('',#478009); +#478009 = CARTESIAN_POINT('',(137.188748,-119.705,-7.5E-02)); +#478010 = CIRCLE('',#478011,6.000000000043E-02); +#478011 = AXIS2_PLACEMENT_3D('',#478012,#478013,#478014); +#478012 = CARTESIAN_POINT('',(137.18874777441,-119.765,-7.5E-02)); +#478013 = DIRECTION('',(0.,0.,-1.)); +#478014 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#478015 = ORIENTED_EDGE('',*,*,#478016,.T.); +#478016 = EDGE_CURVE('',#478008,#478017,#478019,.T.); +#478017 = VERTEX_POINT('',#478018); +#478018 = CARTESIAN_POINT('',(137.711252,-119.705,-7.5E-02)); +#478019 = LINE('',#478020,#478021); +#478020 = CARTESIAN_POINT('',(137.188748,-119.705,-7.5E-02)); +#478021 = VECTOR('',#478022,1.); +#478022 = DIRECTION('',(1.,0.,0.)); +#478023 = ORIENTED_EDGE('',*,*,#478024,.T.); +#478024 = EDGE_CURVE('',#478017,#478025,#478027,.T.); +#478025 = VERTEX_POINT('',#478026); +#478026 = CARTESIAN_POINT('',(137.711252,-119.825,-7.5E-02)); +#478027 = CIRCLE('',#478028,6.000000000043E-02); +#478028 = AXIS2_PLACEMENT_3D('',#478029,#478030,#478031); +#478029 = CARTESIAN_POINT('',(137.71125222558,-119.765,-7.5E-02)); +#478030 = DIRECTION('',(0.,0.,-1.)); +#478031 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#478032 = ORIENTED_EDGE('',*,*,#478033,.T.); +#478033 = EDGE_CURVE('',#478025,#478006,#478034,.T.); +#478034 = LINE('',#478035,#478036); +#478035 = CARTESIAN_POINT('',(137.711252,-119.825,-7.5E-02)); +#478036 = VECTOR('',#478037,1.); +#478037 = DIRECTION('',(-1.,0.,0.)); +#478038 = PLANE('',#478039); +#478039 = AXIS2_PLACEMENT_3D('',#478040,#478041,#478042); +#478040 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478041 = DIRECTION('',(-0.,-0.,-1.)); +#478042 = DIRECTION('',(-1.,0.,0.)); +#478043 = SHELL_BASED_SURFACE_MODEL('',(#478044)); +#478044 = OPEN_SHELL('',(#478045)); +#478045 = ADVANCED_FACE('',(#478046),#478082,.T.); +#478046 = FACE_BOUND('',#478047,.T.); +#478047 = EDGE_LOOP('',(#478048,#478059,#478067,#478076)); +#478048 = ORIENTED_EDGE('',*,*,#478049,.T.); +#478049 = EDGE_CURVE('',#478050,#478052,#478054,.T.); +#478050 = VERTEX_POINT('',#478051); +#478051 = CARTESIAN_POINT('',(128.256359,-119.68,-7.5E-02)); +#478052 = VERTEX_POINT('',#478053); +#478053 = CARTESIAN_POINT('',(128.256359,-119.56,-7.5E-02)); +#478054 = CIRCLE('',#478055,6.000000000043E-02); +#478055 = AXIS2_PLACEMENT_3D('',#478056,#478057,#478058); +#478056 = CARTESIAN_POINT('',(128.25635877441,-119.62,-7.5E-02)); +#478057 = DIRECTION('',(0.,0.,-1.)); +#478058 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#478059 = ORIENTED_EDGE('',*,*,#478060,.T.); +#478060 = EDGE_CURVE('',#478052,#478061,#478063,.T.); +#478061 = VERTEX_POINT('',#478062); +#478062 = CARTESIAN_POINT('',(128.563641,-119.56,-7.5E-02)); +#478063 = LINE('',#478064,#478065); +#478064 = CARTESIAN_POINT('',(128.256359,-119.56,-7.5E-02)); +#478065 = VECTOR('',#478066,1.); +#478066 = DIRECTION('',(1.,0.,0.)); +#478067 = ORIENTED_EDGE('',*,*,#478068,.T.); +#478068 = EDGE_CURVE('',#478061,#478069,#478071,.T.); +#478069 = VERTEX_POINT('',#478070); +#478070 = CARTESIAN_POINT('',(128.563641,-119.68,-7.5E-02)); +#478071 = CIRCLE('',#478072,6.000000000042E-02); +#478072 = AXIS2_PLACEMENT_3D('',#478073,#478074,#478075); +#478073 = CARTESIAN_POINT('',(128.56364122558,-119.62,-7.5E-02)); +#478074 = DIRECTION('',(0.,0.,-1.)); +#478075 = DIRECTION('',(-3.759794727379E-06,0.999999999993,-0.)); +#478076 = ORIENTED_EDGE('',*,*,#478077,.T.); +#478077 = EDGE_CURVE('',#478069,#478050,#478078,.T.); +#478078 = LINE('',#478079,#478080); +#478079 = CARTESIAN_POINT('',(128.563641,-119.68,-7.5E-02)); +#478080 = VECTOR('',#478081,1.); +#478081 = DIRECTION('',(-1.,0.,0.)); +#478082 = PLANE('',#478083); +#478083 = AXIS2_PLACEMENT_3D('',#478084,#478085,#478086); +#478084 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478085 = DIRECTION('',(-0.,-0.,-1.)); +#478086 = DIRECTION('',(-1.,0.,0.)); +#478087 = SHELL_BASED_SURFACE_MODEL('',(#478088)); +#478088 = OPEN_SHELL('',(#478089)); +#478089 = ADVANCED_FACE('',(#478090),#478368,.T.); +#478090 = FACE_BOUND('',#478091,.T.); +#478091 = EDGE_LOOP('',(#478092,#478103,#478111,#478119,#478127,#478135, + #478143,#478151,#478159,#478167,#478175,#478183,#478191,#478200, + #478208,#478216,#478224,#478233,#478241,#478249,#478257,#478265, + #478273,#478281,#478289,#478297,#478305,#478313,#478321,#478329, + #478338,#478346,#478354,#478362)); +#478092 = ORIENTED_EDGE('',*,*,#478093,.T.); +#478093 = EDGE_CURVE('',#478094,#478096,#478098,.T.); +#478094 = VERTEX_POINT('',#478095); +#478095 = CARTESIAN_POINT('',(152.364982,-119.097905,-7.5E-02)); +#478096 = VERTEX_POINT('',#478097); +#478097 = CARTESIAN_POINT('',(152.459577,-119.071999,-7.5E-02)); +#478098 = CIRCLE('',#478099,4.999982421472E-02); +#478099 = AXIS2_PLACEMENT_3D('',#478100,#478101,#478102); +#478100 = CARTESIAN_POINT('',(152.41485599487,-119.0943599955,-7.5E-02) + ); +#478101 = DIRECTION('',(0.,0.,-1.)); +#478102 = DIRECTION('',(-0.9974834044,-7.090033812353E-02,-0.)); +#478103 = ORIENTED_EDGE('',*,*,#478104,.T.); +#478104 = EDGE_CURVE('',#478096,#478105,#478107,.T.); +#478105 = VERTEX_POINT('',#478106); +#478106 = CARTESIAN_POINT('',(152.510232,-119.178325,-7.5E-02)); +#478107 = LINE('',#478108,#478109); +#478108 = CARTESIAN_POINT('',(152.459577,-119.071999,-7.5E-02)); +#478109 = VECTOR('',#478110,1.); +#478110 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#478111 = ORIENTED_EDGE('',*,*,#478112,.T.); +#478112 = EDGE_CURVE('',#478105,#478113,#478115,.T.); +#478113 = VERTEX_POINT('',#478114); +#478114 = CARTESIAN_POINT('',(152.510232,-119.391346,-7.5E-02)); +#478115 = LINE('',#478116,#478117); +#478116 = CARTESIAN_POINT('',(152.510232,-119.178325,-7.5E-02)); +#478117 = VECTOR('',#478118,1.); +#478118 = DIRECTION('',(0.,-1.,0.)); +#478119 = ORIENTED_EDGE('',*,*,#478120,.T.); +#478120 = EDGE_CURVE('',#478113,#478121,#478123,.T.); +#478121 = VERTEX_POINT('',#478122); +#478122 = CARTESIAN_POINT('',(152.452628,-119.508072,-7.5E-02)); +#478123 = LINE('',#478124,#478125); +#478124 = CARTESIAN_POINT('',(152.510232,-119.391346,-7.5E-02)); +#478125 = VECTOR('',#478126,1.); +#478126 = DIRECTION('',(-0.442542699539,-0.896747433275,0.)); +#478127 = ORIENTED_EDGE('',*,*,#478128,.T.); +#478128 = EDGE_CURVE('',#478121,#478129,#478131,.T.); +#478129 = VERTEX_POINT('',#478130); +#478130 = CARTESIAN_POINT('',(152.437216,-119.520034,-7.5E-02)); +#478131 = LINE('',#478132,#478133); +#478132 = CARTESIAN_POINT('',(152.452628,-119.508072,-7.5E-02)); +#478133 = VECTOR('',#478134,1.); +#478134 = DIRECTION('',(-0.789975570356,-0.613138319011,0.)); +#478135 = ORIENTED_EDGE('',*,*,#478136,.T.); +#478136 = EDGE_CURVE('',#478129,#478137,#478139,.T.); +#478137 = VERTEX_POINT('',#478138); +#478138 = CARTESIAN_POINT('',(152.330885,-119.570689,-7.5E-02)); +#478139 = LINE('',#478140,#478141); +#478140 = CARTESIAN_POINT('',(152.437216,-119.520034,-7.5E-02)); +#478141 = VECTOR('',#478142,1.); +#478142 = DIRECTION('',(-0.902790669215,-0.430080233884,0.)); +#478143 = ORIENTED_EDGE('',*,*,#478144,.T.); +#478144 = EDGE_CURVE('',#478137,#478145,#478147,.T.); +#478145 = VERTEX_POINT('',#478146); +#478146 = CARTESIAN_POINT('',(152.260725,-119.570688,-7.5E-02)); +#478147 = LINE('',#478148,#478149); +#478148 = CARTESIAN_POINT('',(152.330885,-119.570689,-7.5E-02)); +#478149 = VECTOR('',#478150,1.); +#478150 = DIRECTION('',(-0.999999999898,1.425313565242E-05,0.)); +#478151 = ORIENTED_EDGE('',*,*,#478152,.T.); +#478152 = EDGE_CURVE('',#478145,#478153,#478155,.T.); +#478153 = VERTEX_POINT('',#478154); +#478154 = CARTESIAN_POINT('',(152.144,-119.513084,-7.5E-02)); +#478155 = LINE('',#478156,#478157); +#478156 = CARTESIAN_POINT('',(152.260725,-119.570688,-7.5E-02)); +#478157 = VECTOR('',#478158,1.); +#478158 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#478159 = ORIENTED_EDGE('',*,*,#478160,.T.); +#478160 = EDGE_CURVE('',#478153,#478161,#478163,.T.); +#478161 = VERTEX_POINT('',#478162); +#478162 = CARTESIAN_POINT('',(152.132038,-119.497672,-7.5E-02)); +#478163 = LINE('',#478164,#478165); +#478164 = CARTESIAN_POINT('',(152.144,-119.513084,-7.5E-02)); +#478165 = VECTOR('',#478166,1.); +#478166 = DIRECTION('',(-0.613138319011,0.789975570356,0.)); +#478167 = ORIENTED_EDGE('',*,*,#478168,.T.); +#478168 = EDGE_CURVE('',#478161,#478169,#478171,.T.); +#478169 = VERTEX_POINT('',#478170); +#478170 = CARTESIAN_POINT('',(152.081383,-119.391346,-7.5E-02)); +#478171 = LINE('',#478172,#478173); +#478172 = CARTESIAN_POINT('',(152.132038,-119.497672,-7.5E-02)); +#478173 = VECTOR('',#478174,1.); +#478174 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#478175 = ORIENTED_EDGE('',*,*,#478176,.T.); +#478176 = EDGE_CURVE('',#478169,#478177,#478179,.T.); +#478177 = VERTEX_POINT('',#478178); +#478178 = CARTESIAN_POINT('',(152.079141,-119.24902,-7.5E-02)); +#478179 = LINE('',#478180,#478181); +#478180 = CARTESIAN_POINT('',(152.081383,-119.391346,-7.5E-02)); +#478181 = VECTOR('',#478182,1.); +#478182 = DIRECTION('',(-1.575061396373E-02,0.999875951386,0.)); +#478183 = ORIENTED_EDGE('',*,*,#478184,.T.); +#478184 = EDGE_CURVE('',#478177,#478185,#478187,.T.); +#478185 = VERTEX_POINT('',#478186); +#478186 = CARTESIAN_POINT('',(152.044254,-119.179246,-7.5E-02)); +#478187 = LINE('',#478188,#478189); +#478188 = CARTESIAN_POINT('',(152.079141,-119.24902,-7.5E-02)); +#478189 = VECTOR('',#478190,1.); +#478190 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#478191 = ORIENTED_EDGE('',*,*,#478192,.T.); +#478192 = EDGE_CURVE('',#478185,#478193,#478195,.T.); +#478193 = VERTEX_POINT('',#478194); +#478194 = CARTESIAN_POINT('',(151.880694,-119.179246,-7.5E-02)); +#478195 = CIRCLE('',#478196,0.111877522228); +#478196 = AXIS2_PLACEMENT_3D('',#478197,#478198,#478199); +#478197 = CARTESIAN_POINT('',(151.962474,-119.2555913441,-7.5E-02)); +#478198 = DIRECTION('',(0.,0.,1.)); +#478199 = DIRECTION('',(0.73097793347,0.682401099632,-0.)); +#478200 = ORIENTED_EDGE('',*,*,#478201,.T.); +#478201 = EDGE_CURVE('',#478193,#478202,#478204,.T.); +#478202 = VERTEX_POINT('',#478203); +#478203 = CARTESIAN_POINT('',(151.845808,-119.24902,-7.5E-02)); +#478204 = LINE('',#478205,#478206); +#478205 = CARTESIAN_POINT('',(151.880694,-119.179246,-7.5E-02)); +#478206 = VECTOR('',#478207,1.); +#478207 = DIRECTION('',(-0.447203340277,-0.894432318538,0.)); +#478208 = ORIENTED_EDGE('',*,*,#478209,.T.); +#478209 = EDGE_CURVE('',#478202,#478210,#478212,.T.); +#478210 = VERTEX_POINT('',#478211); +#478211 = CARTESIAN_POINT('',(151.845808,-119.368271,-7.5E-02)); +#478212 = LINE('',#478213,#478214); +#478213 = CARTESIAN_POINT('',(151.845808,-119.24902,-7.5E-02)); +#478214 = VECTOR('',#478215,1.); +#478215 = DIRECTION('',(0.,-1.,0.)); +#478216 = ORIENTED_EDGE('',*,*,#478217,.T.); +#478217 = EDGE_CURVE('',#478210,#478218,#478220,.T.); +#478218 = VERTEX_POINT('',#478219); +#478219 = CARTESIAN_POINT('',(151.888148,-119.452951,-7.5E-02)); +#478220 = LINE('',#478221,#478222); +#478221 = CARTESIAN_POINT('',(151.845808,-119.368271,-7.5E-02)); +#478222 = VECTOR('',#478223,1.); +#478223 = DIRECTION('',(0.4472135955,-0.894427191,0.)); +#478224 = ORIENTED_EDGE('',*,*,#478225,.T.); +#478225 = EDGE_CURVE('',#478218,#478226,#478228,.T.); +#478226 = VERTEX_POINT('',#478227); +#478227 = CARTESIAN_POINT('',(151.798705,-119.497672,-7.5E-02)); +#478228 = CIRCLE('',#478229,5.000004522504E-02); +#478229 = AXIS2_PLACEMENT_3D('',#478230,#478231,#478232); +#478230 = CARTESIAN_POINT('',(151.84342653675,-119.4753115735,-7.5E-02) + ); +#478231 = DIRECTION('',(0.,0.,-1.)); +#478232 = DIRECTION('',(0.894428455807,0.447211065877,0.)); +#478233 = ORIENTED_EDGE('',*,*,#478234,.T.); +#478234 = EDGE_CURVE('',#478226,#478235,#478237,.T.); +#478235 = VERTEX_POINT('',#478236); +#478236 = CARTESIAN_POINT('',(151.74805,-119.391346,-7.5E-02)); +#478237 = LINE('',#478238,#478239); +#478238 = CARTESIAN_POINT('',(151.798705,-119.497672,-7.5E-02)); +#478239 = VECTOR('',#478240,1.); +#478240 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#478241 = ORIENTED_EDGE('',*,*,#478242,.T.); +#478242 = EDGE_CURVE('',#478235,#478243,#478245,.T.); +#478243 = VERTEX_POINT('',#478244); +#478244 = CARTESIAN_POINT('',(151.74805,-119.225944,-7.5E-02)); +#478245 = LINE('',#478246,#478247); +#478246 = CARTESIAN_POINT('',(151.74805,-119.391346,-7.5E-02)); +#478247 = VECTOR('',#478248,1.); +#478248 = DIRECTION('',(0.,1.,0.)); +#478249 = ORIENTED_EDGE('',*,*,#478250,.T.); +#478250 = EDGE_CURVE('',#478243,#478251,#478253,.T.); +#478251 = VERTEX_POINT('',#478252); +#478252 = CARTESIAN_POINT('',(151.805654,-119.109219,-7.5E-02)); +#478253 = LINE('',#478254,#478255); +#478254 = CARTESIAN_POINT('',(151.74805,-119.225944,-7.5E-02)); +#478255 = VECTOR('',#478256,1.); +#478256 = DIRECTION('',(0.44254574835,0.896745928688,0.)); +#478257 = ORIENTED_EDGE('',*,*,#478258,.T.); +#478258 = EDGE_CURVE('',#478251,#478259,#478261,.T.); +#478259 = VERTEX_POINT('',#478260); +#478260 = CARTESIAN_POINT('',(151.821066,-119.097258,-7.5E-02)); +#478261 = LINE('',#478262,#478263); +#478262 = CARTESIAN_POINT('',(151.805654,-119.109219,-7.5E-02)); +#478263 = VECTOR('',#478264,1.); +#478264 = DIRECTION('',(0.790000397634,0.613106329879,0.)); +#478265 = ORIENTED_EDGE('',*,*,#478266,.T.); +#478266 = EDGE_CURVE('',#478259,#478267,#478269,.T.); +#478267 = VERTEX_POINT('',#478268); +#478268 = CARTESIAN_POINT('',(151.927392,-119.046602,-7.5E-02)); +#478269 = LINE('',#478270,#478271); +#478270 = CARTESIAN_POINT('',(151.821066,-119.097258,-7.5E-02)); +#478271 = VECTOR('',#478272,1.); +#478272 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#478273 = ORIENTED_EDGE('',*,*,#478274,.T.); +#478274 = EDGE_CURVE('',#478267,#478275,#478277,.T.); +#478275 = VERTEX_POINT('',#478276); +#478276 = CARTESIAN_POINT('',(151.98874,-119.044848,-7.5E-02)); +#478277 = LINE('',#478278,#478279); +#478278 = CARTESIAN_POINT('',(151.927392,-119.046602,-7.5E-02)); +#478279 = VECTOR('',#478280,1.); +#478280 = DIRECTION('',(0.999591528081,2.857931049497E-02,0.)); +#478281 = ORIENTED_EDGE('',*,*,#478282,.T.); +#478282 = EDGE_CURVE('',#478275,#478283,#478285,.T.); +#478283 = VERTEX_POINT('',#478284); +#478284 = CARTESIAN_POINT('',(152.008645,-119.049639,-7.5E-02)); +#478285 = LINE('',#478286,#478287); +#478286 = CARTESIAN_POINT('',(151.98874,-119.044848,-7.5E-02)); +#478287 = VECTOR('',#478288,1.); +#478288 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#478289 = ORIENTED_EDGE('',*,*,#478290,.T.); +#478290 = EDGE_CURVE('',#478283,#478291,#478293,.T.); +#478291 = VERTEX_POINT('',#478292); +#478292 = CARTESIAN_POINT('',(152.116473,-119.107029,-7.5E-02)); +#478293 = LINE('',#478294,#478295); +#478294 = CARTESIAN_POINT('',(152.008645,-119.049639,-7.5E-02)); +#478295 = VECTOR('',#478296,1.); +#478296 = DIRECTION('',(0.882754645264,-0.469834264678,0.)); +#478297 = ORIENTED_EDGE('',*,*,#478298,.T.); +#478298 = EDGE_CURVE('',#478291,#478299,#478301,.T.); +#478299 = VERTEX_POINT('',#478300); +#478300 = CARTESIAN_POINT('',(152.175335,-119.218083,-7.5E-02)); +#478301 = LINE('',#478302,#478303); +#478302 = CARTESIAN_POINT('',(152.116473,-119.107029,-7.5E-02)); +#478303 = VECTOR('',#478304,1.); +#478304 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#478305 = ORIENTED_EDGE('',*,*,#478306,.T.); +#478306 = EDGE_CURVE('',#478299,#478307,#478309,.T.); +#478307 = VERTEX_POINT('',#478308); +#478308 = CARTESIAN_POINT('',(152.179141,-119.237217,-7.5E-02)); +#478309 = LINE('',#478310,#478311); +#478310 = CARTESIAN_POINT('',(152.175335,-119.218083,-7.5E-02)); +#478311 = VECTOR('',#478312,1.); +#478312 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#478313 = ORIENTED_EDGE('',*,*,#478314,.T.); +#478314 = EDGE_CURVE('',#478307,#478315,#478317,.T.); +#478315 = VERTEX_POINT('',#478316); +#478316 = CARTESIAN_POINT('',(152.179141,-119.368271,-7.5E-02)); +#478317 = LINE('',#478318,#478319); +#478318 = CARTESIAN_POINT('',(152.179141,-119.237217,-7.5E-02)); +#478319 = VECTOR('',#478320,1.); +#478320 = DIRECTION('',(0.,-1.,0.)); +#478321 = ORIENTED_EDGE('',*,*,#478322,.T.); +#478322 = EDGE_CURVE('',#478315,#478323,#478325,.T.); +#478323 = VERTEX_POINT('',#478324); +#478324 = CARTESIAN_POINT('',(152.214027,-119.438044,-7.5E-02)); +#478325 = LINE('',#478326,#478327); +#478326 = CARTESIAN_POINT('',(152.179141,-119.368271,-7.5E-02)); +#478327 = VECTOR('',#478328,1.); +#478328 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#478329 = ORIENTED_EDGE('',*,*,#478330,.T.); +#478330 = EDGE_CURVE('',#478323,#478331,#478333,.T.); +#478331 = VERTEX_POINT('',#478332); +#478332 = CARTESIAN_POINT('',(152.377588,-119.438044,-7.5E-02)); +#478333 = CIRCLE('',#478334,0.111876864088); +#478334 = AXIS2_PLACEMENT_3D('',#478335,#478336,#478337); +#478335 = CARTESIAN_POINT('',(152.2958075,-119.3617001558,-7.5E-02)); +#478336 = DIRECTION('',(0.,0.,1.)); +#478337 = DIRECTION('',(-0.730986702803,-0.682391705932,0.)); +#478338 = ORIENTED_EDGE('',*,*,#478339,.T.); +#478339 = EDGE_CURVE('',#478331,#478340,#478342,.T.); +#478340 = VERTEX_POINT('',#478341); +#478341 = CARTESIAN_POINT('',(152.412475,-119.36827,-7.5E-02)); +#478342 = LINE('',#478343,#478344); +#478343 = CARTESIAN_POINT('',(152.377588,-119.438044,-7.5E-02)); +#478344 = VECTOR('',#478345,1.); +#478345 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#478346 = ORIENTED_EDGE('',*,*,#478347,.T.); +#478347 = EDGE_CURVE('',#478340,#478348,#478350,.T.); +#478348 = VERTEX_POINT('',#478349); +#478349 = CARTESIAN_POINT('',(152.412475,-119.201401,-7.5E-02)); +#478350 = LINE('',#478351,#478352); +#478351 = CARTESIAN_POINT('',(152.412475,-119.36827,-7.5E-02)); +#478352 = VECTOR('',#478353,1.); +#478353 = DIRECTION('',(0.,1.,0.)); +#478354 = ORIENTED_EDGE('',*,*,#478355,.T.); +#478355 = EDGE_CURVE('',#478348,#478356,#478358,.T.); +#478356 = VERTEX_POINT('',#478357); +#478357 = CARTESIAN_POINT('',(152.370135,-119.116721,-7.5E-02)); +#478358 = LINE('',#478359,#478360); +#478359 = CARTESIAN_POINT('',(152.412475,-119.201401,-7.5E-02)); +#478360 = VECTOR('',#478361,1.); +#478361 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#478362 = ORIENTED_EDGE('',*,*,#478363,.T.); +#478363 = EDGE_CURVE('',#478356,#478094,#478364,.T.); +#478364 = LINE('',#478365,#478366); +#478365 = CARTESIAN_POINT('',(152.370135,-119.116721,-7.5E-02)); +#478366 = VECTOR('',#478367,1.); +#478367 = DIRECTION('',(-0.26413652018,0.964485302484,0.)); +#478368 = PLANE('',#478369); +#478369 = AXIS2_PLACEMENT_3D('',#478370,#478371,#478372); +#478370 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478371 = DIRECTION('',(-0.,-0.,-1.)); +#478372 = DIRECTION('',(-1.,0.,0.)); +#478373 = SHELL_BASED_SURFACE_MODEL('',(#478374)); +#478374 = OPEN_SHELL('',(#478375)); +#478375 = ADVANCED_FACE('',(#478376),#478533,.T.); +#478376 = FACE_BOUND('',#478377,.T.); +#478377 = EDGE_LOOP('',(#478378,#478389,#478397,#478405,#478413,#478421, + #478429,#478437,#478445,#478453,#478462,#478470,#478479,#478487, + #478495,#478503,#478511,#478519,#478527)); +#478378 = ORIENTED_EDGE('',*,*,#478379,.T.); +#478379 = EDGE_CURVE('',#478380,#478382,#478384,.T.); +#478380 = VERTEX_POINT('',#478381); +#478381 = CARTESIAN_POINT('',(153.405752,-118.811027,-7.5E-02)); +#478382 = VERTEX_POINT('',#478383); +#478383 = CARTESIAN_POINT('',(153.405752,-118.711027,-7.5E-02)); +#478384 = CIRCLE('',#478385,5.000000000002E-02); +#478385 = AXIS2_PLACEMENT_3D('',#478386,#478387,#478388); +#478386 = CARTESIAN_POINT('',(153.40575204771,-118.761027,-7.5E-02)); +#478387 = DIRECTION('',(0.,0.,-1.)); +#478388 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#478389 = ORIENTED_EDGE('',*,*,#478390,.T.); +#478390 = EDGE_CURVE('',#478382,#478391,#478393,.T.); +#478391 = VERTEX_POINT('',#478392); +#478392 = CARTESIAN_POINT('',(153.932017,-118.711515,-7.5E-02)); +#478393 = LINE('',#478394,#478395); +#478394 = CARTESIAN_POINT('',(153.405752,-118.711027,-7.5E-02)); +#478395 = VECTOR('',#478396,1.); +#478396 = DIRECTION('',(0.999999570067,-9.272890847713E-04,0.)); +#478397 = ORIENTED_EDGE('',*,*,#478398,.T.); +#478398 = EDGE_CURVE('',#478391,#478399,#478401,.T.); +#478399 = VERTEX_POINT('',#478400); +#478400 = CARTESIAN_POINT('',(153.951921,-118.716306,-7.5E-02)); +#478401 = LINE('',#478402,#478403); +#478402 = CARTESIAN_POINT('',(153.932017,-118.711515,-7.5E-02)); +#478403 = VECTOR('',#478404,1.); +#478404 = DIRECTION('',(0.972231458314,-0.234021348311,0.)); +#478405 = ORIENTED_EDGE('',*,*,#478406,.T.); +#478406 = EDGE_CURVE('',#478399,#478407,#478409,.T.); +#478407 = VERTEX_POINT('',#478408); +#478408 = CARTESIAN_POINT('',(154.059751,-118.773696,-7.5E-02)); +#478409 = LINE('',#478410,#478411); +#478410 = CARTESIAN_POINT('',(153.951921,-118.716306,-7.5E-02)); +#478411 = VECTOR('',#478412,1.); +#478412 = DIRECTION('',(0.882758259516,-0.469827473927,0.)); +#478413 = ORIENTED_EDGE('',*,*,#478414,.T.); +#478414 = EDGE_CURVE('',#478407,#478415,#478417,.T.); +#478415 = VERTEX_POINT('',#478416); +#478416 = CARTESIAN_POINT('',(154.118613,-118.88475,-7.5E-02)); +#478417 = LINE('',#478418,#478419); +#478418 = CARTESIAN_POINT('',(154.059751,-118.773696,-7.5E-02)); +#478419 = VECTOR('',#478420,1.); +#478420 = DIRECTION('',(0.468314631286,-0.88356177267,0.)); +#478421 = ORIENTED_EDGE('',*,*,#478422,.T.); +#478422 = EDGE_CURVE('',#478415,#478423,#478425,.T.); +#478423 = VERTEX_POINT('',#478424); +#478424 = CARTESIAN_POINT('',(154.122419,-118.903884,-7.5E-02)); +#478425 = LINE('',#478426,#478427); +#478426 = CARTESIAN_POINT('',(154.118613,-118.88475,-7.5E-02)); +#478427 = VECTOR('',#478428,1.); +#478428 = DIRECTION('',(0.195090852694,-0.980785174845,0.)); +#478429 = ORIENTED_EDGE('',*,*,#478430,.T.); +#478430 = EDGE_CURVE('',#478423,#478431,#478433,.T.); +#478431 = VERTEX_POINT('',#478432); +#478432 = CARTESIAN_POINT('',(154.120176,-119.058013,-7.5E-02)); +#478433 = LINE('',#478434,#478435); +#478434 = CARTESIAN_POINT('',(154.122419,-118.903884,-7.5E-02)); +#478435 = VECTOR('',#478436,1.); +#478436 = DIRECTION('',(-1.455120401612E-02,-0.999894125626,0.)); +#478437 = ORIENTED_EDGE('',*,*,#478438,.T.); +#478438 = EDGE_CURVE('',#478431,#478439,#478441,.T.); +#478439 = VERTEX_POINT('',#478440); +#478440 = CARTESIAN_POINT('',(154.081035,-119.141311,-7.5E-02)); +#478441 = LINE('',#478442,#478443); +#478442 = CARTESIAN_POINT('',(154.120176,-119.058013,-7.5E-02)); +#478443 = VECTOR('',#478444,1.); +#478444 = DIRECTION('',(-0.425280509061,-0.905061593823,0.)); +#478445 = ORIENTED_EDGE('',*,*,#478446,.T.); +#478446 = EDGE_CURVE('',#478439,#478447,#478449,.T.); +#478447 = VERTEX_POINT('',#478448); +#478448 = CARTESIAN_POINT('',(154.091553,-119.143404,-7.5E-02)); +#478449 = LINE('',#478450,#478451); +#478450 = CARTESIAN_POINT('',(154.081035,-119.141311,-7.5E-02)); +#478451 = VECTOR('',#478452,1.); +#478452 = DIRECTION('',(0.980770295219,-0.195165642508,0.)); +#478453 = ORIENTED_EDGE('',*,*,#478454,.T.); +#478454 = EDGE_CURVE('',#478447,#478455,#478457,.T.); +#478455 = VERTEX_POINT('',#478456); +#478456 = CARTESIAN_POINT('',(154.072419,-119.239598,-7.5E-02)); +#478457 = CIRCLE('',#478458,4.999998452108E-02); +#478458 = AXIS2_PLACEMENT_3D('',#478459,#478460,#478461); +#478459 = CARTESIAN_POINT('',(154.07241896263,-119.1895980154,-7.5E-02) + ); +#478460 = DIRECTION('',(0.,0.,-1.)); +#478461 = DIRECTION('',(0.382680865851,0.923880595592,0.)); +#478462 = ORIENTED_EDGE('',*,*,#478463,.T.); +#478463 = EDGE_CURVE('',#478455,#478464,#478466,.T.); +#478464 = VERTEX_POINT('',#478465); +#478465 = CARTESIAN_POINT('',(153.405752,-119.239598,-7.5E-02)); +#478466 = LINE('',#478467,#478468); +#478467 = CARTESIAN_POINT('',(154.072419,-119.239598,-7.5E-02)); +#478468 = VECTOR('',#478469,1.); +#478469 = DIRECTION('',(-1.,0.,0.)); +#478470 = ORIENTED_EDGE('',*,*,#478471,.T.); +#478471 = EDGE_CURVE('',#478464,#478472,#478474,.T.); +#478472 = VERTEX_POINT('',#478473); +#478473 = CARTESIAN_POINT('',(153.405752,-119.139598,-7.5E-02)); +#478474 = CIRCLE('',#478475,5.000000000002E-02); +#478475 = AXIS2_PLACEMENT_3D('',#478476,#478477,#478478); +#478476 = CARTESIAN_POINT('',(153.40575204771,-119.189598,-7.5E-02)); +#478477 = DIRECTION('',(0.,0.,-1.)); +#478478 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#478479 = ORIENTED_EDGE('',*,*,#478480,.T.); +#478480 = EDGE_CURVE('',#478472,#478481,#478483,.T.); +#478481 = VERTEX_POINT('',#478482); +#478482 = CARTESIAN_POINT('',(153.956469,-119.139598,-7.5E-02)); +#478483 = LINE('',#478484,#478485); +#478484 = CARTESIAN_POINT('',(153.405752,-119.139598,-7.5E-02)); +#478485 = VECTOR('',#478486,1.); +#478486 = DIRECTION('',(1.,0.,0.)); +#478487 = ORIENTED_EDGE('',*,*,#478488,.T.); +#478488 = EDGE_CURVE('',#478481,#478489,#478491,.T.); +#478489 = VERTEX_POINT('',#478490); +#478490 = CARTESIAN_POINT('',(153.983708,-119.112359,-7.5E-02)); +#478491 = LINE('',#478492,#478493); +#478492 = CARTESIAN_POINT('',(153.956469,-119.139598,-7.5E-02)); +#478493 = VECTOR('',#478494,1.); +#478494 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#478495 = ORIENTED_EDGE('',*,*,#478496,.T.); +#478496 = EDGE_CURVE('',#478489,#478497,#478499,.T.); +#478497 = VERTEX_POINT('',#478498); +#478498 = CARTESIAN_POINT('',(154.022419,-119.034937,-7.5E-02)); +#478499 = LINE('',#478500,#478501); +#478500 = CARTESIAN_POINT('',(153.983708,-119.112359,-7.5E-02)); +#478501 = VECTOR('',#478502,1.); +#478502 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#478503 = ORIENTED_EDGE('',*,*,#478504,.T.); +#478504 = EDGE_CURVE('',#478497,#478505,#478507,.T.); +#478505 = VERTEX_POINT('',#478506); +#478506 = CARTESIAN_POINT('',(154.022419,-118.915687,-7.5E-02)); +#478507 = LINE('',#478508,#478509); +#478508 = CARTESIAN_POINT('',(154.022419,-119.034937,-7.5E-02)); +#478509 = VECTOR('',#478510,1.); +#478510 = DIRECTION('',(0.,1.,0.)); +#478511 = ORIENTED_EDGE('',*,*,#478512,.T.); +#478512 = EDGE_CURVE('',#478505,#478513,#478515,.T.); +#478513 = VERTEX_POINT('',#478514); +#478514 = CARTESIAN_POINT('',(153.987532,-118.845913,-7.5E-02)); +#478515 = LINE('',#478516,#478517); +#478516 = CARTESIAN_POINT('',(154.022419,-118.915687,-7.5E-02)); +#478517 = VECTOR('',#478518,1.); +#478518 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#478519 = ORIENTED_EDGE('',*,*,#478520,.T.); +#478520 = EDGE_CURVE('',#478513,#478521,#478523,.T.); +#478521 = VERTEX_POINT('',#478522); +#478522 = CARTESIAN_POINT('',(153.917759,-118.811027,-7.5E-02)); +#478523 = LINE('',#478524,#478525); +#478524 = CARTESIAN_POINT('',(153.987532,-118.845913,-7.5E-02)); +#478525 = VECTOR('',#478526,1.); +#478526 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#478527 = ORIENTED_EDGE('',*,*,#478528,.T.); +#478528 = EDGE_CURVE('',#478521,#478380,#478529,.T.); +#478529 = LINE('',#478530,#478531); +#478530 = CARTESIAN_POINT('',(153.917759,-118.811027,-7.5E-02)); +#478531 = VECTOR('',#478532,1.); +#478532 = DIRECTION('',(-1.,0.,0.)); +#478533 = PLANE('',#478534); +#478534 = AXIS2_PLACEMENT_3D('',#478535,#478536,#478537); +#478535 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478536 = DIRECTION('',(-0.,-0.,-1.)); +#478537 = DIRECTION('',(-1.,0.,0.)); +#478538 = SHELL_BASED_SURFACE_MODEL('',(#478539)); +#478539 = OPEN_SHELL('',(#478540)); +#478540 = ADVANCED_FACE('',(#478541),#478577,.T.); +#478541 = FACE_BOUND('',#478542,.T.); +#478542 = EDGE_LOOP('',(#478543,#478554,#478562,#478571)); +#478543 = ORIENTED_EDGE('',*,*,#478544,.T.); +#478544 = EDGE_CURVE('',#478545,#478547,#478549,.T.); +#478545 = VERTEX_POINT('',#478546); +#478546 = CARTESIAN_POINT('',(126.788748,-118.795,-7.5E-02)); +#478547 = VERTEX_POINT('',#478548); +#478548 = CARTESIAN_POINT('',(126.788748,-118.675,-7.5E-02)); +#478549 = CIRCLE('',#478550,6.000000000043E-02); +#478550 = AXIS2_PLACEMENT_3D('',#478551,#478552,#478553); +#478551 = CARTESIAN_POINT('',(126.78874777441,-118.735,-7.5E-02)); +#478552 = DIRECTION('',(0.,0.,-1.)); +#478553 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#478554 = ORIENTED_EDGE('',*,*,#478555,.T.); +#478555 = EDGE_CURVE('',#478547,#478556,#478558,.T.); +#478556 = VERTEX_POINT('',#478557); +#478557 = CARTESIAN_POINT('',(127.311252,-118.675,-7.5E-02)); +#478558 = LINE('',#478559,#478560); +#478559 = CARTESIAN_POINT('',(126.788748,-118.675,-7.5E-02)); +#478560 = VECTOR('',#478561,1.); +#478561 = DIRECTION('',(1.,0.,0.)); +#478562 = ORIENTED_EDGE('',*,*,#478563,.T.); +#478563 = EDGE_CURVE('',#478556,#478564,#478566,.T.); +#478564 = VERTEX_POINT('',#478565); +#478565 = CARTESIAN_POINT('',(127.311252,-118.795,-7.5E-02)); +#478566 = CIRCLE('',#478567,6.000000000043E-02); +#478567 = AXIS2_PLACEMENT_3D('',#478568,#478569,#478570); +#478568 = CARTESIAN_POINT('',(127.31125222558,-118.735,-7.5E-02)); +#478569 = DIRECTION('',(0.,0.,-1.)); +#478570 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#478571 = ORIENTED_EDGE('',*,*,#478572,.T.); +#478572 = EDGE_CURVE('',#478564,#478545,#478573,.T.); +#478573 = LINE('',#478574,#478575); +#478574 = CARTESIAN_POINT('',(127.311252,-118.795,-7.5E-02)); +#478575 = VECTOR('',#478576,1.); +#478576 = DIRECTION('',(-1.,0.,0.)); +#478577 = PLANE('',#478578); +#478578 = AXIS2_PLACEMENT_3D('',#478579,#478580,#478581); +#478579 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478580 = DIRECTION('',(-0.,-0.,-1.)); +#478581 = DIRECTION('',(-1.,0.,0.)); +#478582 = SHELL_BASED_SURFACE_MODEL('',(#478583)); +#478583 = OPEN_SHELL('',(#478584)); +#478584 = ADVANCED_FACE('',(#478585,#478702),#478770,.T.); +#478585 = FACE_BOUND('',#478586,.T.); +#478586 = EDGE_LOOP('',(#478587,#478598,#478606,#478615,#478623,#478631, + #478639,#478647,#478655,#478664,#478672,#478680,#478688,#478696)); +#478587 = ORIENTED_EDGE('',*,*,#478588,.T.); +#478588 = EDGE_CURVE('',#478589,#478591,#478593,.T.); +#478589 = VERTEX_POINT('',#478590); +#478590 = CARTESIAN_POINT('',(151.749614,-118.256351,-7.5E-02)); +#478591 = VERTEX_POINT('',#478592); +#478592 = CARTESIAN_POINT('',(151.795808,-118.187217,-7.5E-02)); +#478593 = CIRCLE('',#478594,5.000000000002E-02); +#478594 = AXIS2_PLACEMENT_3D('',#478595,#478596,#478597); +#478595 = CARTESIAN_POINT('',(151.79580804771,-118.237217,-7.5E-02)); +#478596 = DIRECTION('',(0.,0.,-1.)); +#478597 = DIRECTION('',(-0.923880954236,-0.38268,-0.)); +#478598 = ORIENTED_EDGE('',*,*,#478599,.T.); +#478599 = EDGE_CURVE('',#478591,#478600,#478602,.T.); +#478600 = VERTEX_POINT('',#478601); +#478601 = CARTESIAN_POINT('',(152.795808,-118.187217,-7.5E-02)); +#478602 = LINE('',#478603,#478604); +#478603 = CARTESIAN_POINT('',(151.795808,-118.187217,-7.5E-02)); +#478604 = VECTOR('',#478605,1.); +#478605 = DIRECTION('',(1.,0.,0.)); +#478606 = ORIENTED_EDGE('',*,*,#478607,.T.); +#478607 = EDGE_CURVE('',#478600,#478608,#478610,.T.); +#478608 = VERTEX_POINT('',#478609); +#478609 = CARTESIAN_POINT('',(152.795808,-118.287217,-7.5E-02)); +#478610 = CIRCLE('',#478611,5.000000000002E-02); +#478611 = AXIS2_PLACEMENT_3D('',#478612,#478613,#478614); +#478612 = CARTESIAN_POINT('',(152.79580795228,-118.237217,-7.5E-02)); +#478613 = DIRECTION('',(0.,0.,-1.)); +#478614 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#478615 = ORIENTED_EDGE('',*,*,#478616,.T.); +#478616 = EDGE_CURVE('',#478608,#478617,#478619,.T.); +#478617 = VERTEX_POINT('',#478618); +#478618 = CARTESIAN_POINT('',(152.495758,-118.287217,-7.5E-02)); +#478619 = LINE('',#478620,#478621); +#478620 = CARTESIAN_POINT('',(152.795808,-118.287217,-7.5E-02)); +#478621 = VECTOR('',#478622,1.); +#478622 = DIRECTION('',(-1.,0.,0.)); +#478623 = ORIENTED_EDGE('',*,*,#478624,.T.); +#478624 = EDGE_CURVE('',#478617,#478625,#478627,.T.); +#478625 = VERTEX_POINT('',#478626); +#478626 = CARTESIAN_POINT('',(152.511986,-118.329998,-7.5E-02)); +#478627 = LINE('',#478628,#478629); +#478628 = CARTESIAN_POINT('',(152.495758,-118.287217,-7.5E-02)); +#478629 = VECTOR('',#478630,1.); +#478630 = DIRECTION('',(0.354668069724,-0.934992278213,0.)); +#478631 = ORIENTED_EDGE('',*,*,#478632,.T.); +#478632 = EDGE_CURVE('',#478625,#478633,#478635,.T.); +#478633 = VERTEX_POINT('',#478634); +#478634 = CARTESIAN_POINT('',(152.510232,-118.534203,-7.5E-02)); +#478635 = LINE('',#478636,#478637); +#478636 = CARTESIAN_POINT('',(152.511986,-118.329998,-7.5E-02)); +#478637 = VECTOR('',#478638,1.); +#478638 = DIRECTION('',(-8.589090866264E-03,-0.999963113079,0.)); +#478639 = ORIENTED_EDGE('',*,*,#478640,.T.); +#478640 = EDGE_CURVE('',#478633,#478641,#478643,.T.); +#478641 = VERTEX_POINT('',#478642); +#478642 = CARTESIAN_POINT('',(152.450211,-118.653525,-7.5E-02)); +#478643 = LINE('',#478644,#478645); +#478644 = CARTESIAN_POINT('',(152.510232,-118.534203,-7.5E-02)); +#478645 = VECTOR('',#478646,1.); +#478646 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#478647 = ORIENTED_EDGE('',*,*,#478648,.T.); +#478648 = EDGE_CURVE('',#478641,#478649,#478651,.T.); +#478649 = VERTEX_POINT('',#478650); +#478650 = CARTESIAN_POINT('',(152.389596,-118.71051,-7.5E-02)); +#478651 = LINE('',#478652,#478653); +#478652 = CARTESIAN_POINT('',(152.450211,-118.653525,-7.5E-02)); +#478653 = VECTOR('',#478654,1.); +#478654 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#478655 = ORIENTED_EDGE('',*,*,#478656,.T.); +#478656 = EDGE_CURVE('',#478649,#478657,#478659,.T.); +#478657 = VERTEX_POINT('',#478658); +#478658 = CARTESIAN_POINT('',(151.85569,-118.701143,-7.5E-02)); +#478659 = CIRCLE('',#478660,0.484201554455); +#478660 = AXIS2_PLACEMENT_3D('',#478661,#478662,#478663); +#478661 = CARTESIAN_POINT('',(152.12972870064,-118.301951397,-7.5E-02)); +#478662 = DIRECTION('',(-0.,0.,-1.)); +#478663 = DIRECTION('',(0.536692410344,-0.843777966457,-0.)); +#478664 = ORIENTED_EDGE('',*,*,#478665,.T.); +#478665 = EDGE_CURVE('',#478657,#478666,#478668,.T.); +#478666 = VERTEX_POINT('',#478667); +#478667 = CARTESIAN_POINT('',(151.798705,-118.640529,-7.5E-02)); +#478668 = LINE('',#478669,#478670); +#478669 = CARTESIAN_POINT('',(151.85569,-118.701143,-7.5E-02)); +#478670 = VECTOR('',#478671,1.); +#478671 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#478672 = ORIENTED_EDGE('',*,*,#478673,.T.); +#478673 = EDGE_CURVE('',#478666,#478674,#478676,.T.); +#478674 = VERTEX_POINT('',#478675); +#478675 = CARTESIAN_POINT('',(151.74805,-118.534203,-7.5E-02)); +#478676 = LINE('',#478677,#478678); +#478677 = CARTESIAN_POINT('',(151.798705,-118.640529,-7.5E-02)); +#478678 = VECTOR('',#478679,1.); +#478679 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#478680 = ORIENTED_EDGE('',*,*,#478681,.T.); +#478681 = EDGE_CURVE('',#478674,#478682,#478684,.T.); +#478682 = VERTEX_POINT('',#478683); +#478683 = CARTESIAN_POINT('',(151.74805,-118.321182,-7.5E-02)); +#478684 = LINE('',#478685,#478686); +#478685 = CARTESIAN_POINT('',(151.74805,-118.534203,-7.5E-02)); +#478686 = VECTOR('',#478687,1.); +#478687 = DIRECTION('',(0.,1.,0.)); +#478688 = ORIENTED_EDGE('',*,*,#478689,.T.); +#478689 = EDGE_CURVE('',#478682,#478690,#478692,.T.); +#478690 = VERTEX_POINT('',#478691); +#478691 = CARTESIAN_POINT('',(151.76851,-118.275247,-7.5E-02)); +#478692 = LINE('',#478693,#478694); +#478693 = CARTESIAN_POINT('',(151.74805,-118.321182,-7.5E-02)); +#478694 = VECTOR('',#478695,1.); +#478695 = DIRECTION('',(0.406876386711,0.91348322696,0.)); +#478696 = ORIENTED_EDGE('',*,*,#478697,.T.); +#478697 = EDGE_CURVE('',#478690,#478589,#478698,.T.); +#478698 = LINE('',#478699,#478700); +#478699 = CARTESIAN_POINT('',(151.76851,-118.275247,-7.5E-02)); +#478700 = VECTOR('',#478701,1.); +#478701 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#478702 = FACE_BOUND('',#478703,.T.); +#478703 = EDGE_LOOP('',(#478704,#478714,#478722,#478730,#478738,#478747, + #478755,#478764)); +#478704 = ORIENTED_EDGE('',*,*,#478705,.T.); +#478705 = EDGE_CURVE('',#478706,#478708,#478710,.T.); +#478706 = VERTEX_POINT('',#478707); +#478707 = CARTESIAN_POINT('',(152.412475,-118.344258,-7.5E-02)); +#478708 = VERTEX_POINT('',#478709); +#478709 = CARTESIAN_POINT('',(152.383954,-118.287217,-7.5E-02)); +#478710 = LINE('',#478711,#478712); +#478711 = CARTESIAN_POINT('',(152.412475,-118.344258,-7.5E-02)); +#478712 = VECTOR('',#478713,1.); +#478713 = DIRECTION('',(-0.447219867638,0.894424054904,0.)); +#478714 = ORIENTED_EDGE('',*,*,#478715,.T.); +#478715 = EDGE_CURVE('',#478708,#478716,#478718,.T.); +#478716 = VERTEX_POINT('',#478717); +#478717 = CARTESIAN_POINT('',(151.874329,-118.287217,-7.5E-02)); +#478718 = LINE('',#478719,#478720); +#478719 = CARTESIAN_POINT('',(152.383954,-118.287217,-7.5E-02)); +#478720 = VECTOR('',#478721,1.); +#478721 = DIRECTION('',(-1.,0.,0.)); +#478722 = ORIENTED_EDGE('',*,*,#478723,.T.); +#478723 = EDGE_CURVE('',#478716,#478724,#478726,.T.); +#478724 = VERTEX_POINT('',#478725); +#478725 = CARTESIAN_POINT('',(151.845808,-118.344258,-7.5E-02)); +#478726 = LINE('',#478727,#478728); +#478727 = CARTESIAN_POINT('',(151.874329,-118.287217,-7.5E-02)); +#478728 = VECTOR('',#478729,1.); +#478729 = DIRECTION('',(-0.447219867637,-0.894424054904,0.)); +#478730 = ORIENTED_EDGE('',*,*,#478731,.T.); +#478731 = EDGE_CURVE('',#478724,#478732,#478734,.T.); +#478732 = VERTEX_POINT('',#478733); +#478733 = CARTESIAN_POINT('',(151.845808,-118.511128,-7.5E-02)); +#478734 = LINE('',#478735,#478736); +#478735 = CARTESIAN_POINT('',(151.845808,-118.344258,-7.5E-02)); +#478736 = VECTOR('',#478737,1.); +#478737 = DIRECTION('',(0.,-1.,0.)); +#478738 = ORIENTED_EDGE('',*,*,#478739,.T.); +#478739 = EDGE_CURVE('',#478732,#478740,#478742,.T.); +#478740 = VERTEX_POINT('',#478741); +#478741 = CARTESIAN_POINT('',(151.998088,-118.663407,-7.5E-02)); +#478742 = CIRCLE('',#478743,0.215060459698); +#478743 = AXIS2_PLACEMENT_3D('',#478744,#478745,#478746); +#478744 = CARTESIAN_POINT('',(152.05358433746,-118.455630298,-7.5E-02)); +#478745 = DIRECTION('',(0.,0.,1.)); +#478746 = DIRECTION('',(-0.966129886234,-0.2580562786,0.)); +#478747 = ORIENTED_EDGE('',*,*,#478748,.T.); +#478748 = EDGE_CURVE('',#478740,#478749,#478751,.T.); +#478749 = VERTEX_POINT('',#478750); +#478750 = CARTESIAN_POINT('',(152.260195,-118.663407,-7.5E-02)); +#478751 = LINE('',#478752,#478753); +#478752 = CARTESIAN_POINT('',(151.998088,-118.663407,-7.5E-02)); +#478753 = VECTOR('',#478754,1.); +#478754 = DIRECTION('',(1.,0.,0.)); +#478755 = ORIENTED_EDGE('',*,*,#478756,.T.); +#478756 = EDGE_CURVE('',#478749,#478757,#478759,.T.); +#478757 = VERTEX_POINT('',#478758); +#478758 = CARTESIAN_POINT('',(152.412475,-118.511127,-7.5E-02)); +#478759 = CIRCLE('',#478760,0.215072998571); +#478760 = AXIS2_PLACEMENT_3D('',#478761,#478762,#478763); +#478761 = CARTESIAN_POINT('',(152.20468813236,-118.4556201323,-7.5E-02) + ); +#478762 = DIRECTION('',(0.,0.,1.)); +#478763 = DIRECTION('',(0.2580838506,-0.966122521246,0.)); +#478764 = ORIENTED_EDGE('',*,*,#478765,.T.); +#478765 = EDGE_CURVE('',#478757,#478706,#478766,.T.); +#478766 = LINE('',#478767,#478768); +#478767 = CARTESIAN_POINT('',(152.412475,-118.511127,-7.5E-02)); +#478768 = VECTOR('',#478769,1.); +#478769 = DIRECTION('',(0.,1.,0.)); +#478770 = PLANE('',#478771); +#478771 = AXIS2_PLACEMENT_3D('',#478772,#478773,#478774); +#478772 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478773 = DIRECTION('',(-0.,-0.,-1.)); +#478774 = DIRECTION('',(-1.,0.,0.)); +#478775 = SHELL_BASED_SURFACE_MODEL('',(#478776)); +#478776 = OPEN_SHELL('',(#478777)); +#478777 = ADVANCED_FACE('',(#478778),#478822,.T.); +#478778 = FACE_BOUND('',#478779,.T.); +#478779 = EDGE_LOOP('',(#478780,#478791,#478799,#478808,#478816)); +#478780 = ORIENTED_EDGE('',*,*,#478781,.T.); +#478781 = EDGE_CURVE('',#478782,#478784,#478786,.T.); +#478782 = VERTEX_POINT('',#478783); +#478783 = CARTESIAN_POINT('',(129.584567,-118.389203,-7.5E-02)); +#478784 = VERTEX_POINT('',#478785); +#478785 = CARTESIAN_POINT('',(129.7,-118.412164,-7.5E-02)); +#478786 = CIRCLE('',#478787,6.000007318647E-02); +#478787 = AXIS2_PLACEMENT_3D('',#478788,#478789,#478790); +#478788 = CARTESIAN_POINT('',(129.63999992681,-118.4121638233,-7.5E-02) + ); +#478789 = DIRECTION('',(0.,0.,-1.)); +#478790 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#478791 = ORIENTED_EDGE('',*,*,#478792,.T.); +#478792 = EDGE_CURVE('',#478784,#478793,#478795,.T.); +#478793 = VERTEX_POINT('',#478794); +#478794 = CARTESIAN_POINT('',(129.7,-118.627836,-7.5E-02)); +#478795 = LINE('',#478796,#478797); +#478796 = CARTESIAN_POINT('',(129.7,-118.412164,-7.5E-02)); +#478797 = VECTOR('',#478798,1.); +#478798 = DIRECTION('',(0.,-1.,0.)); +#478799 = ORIENTED_EDGE('',*,*,#478800,.T.); +#478800 = EDGE_CURVE('',#478793,#478801,#478803,.T.); +#478801 = VERTEX_POINT('',#478802); +#478802 = CARTESIAN_POINT('',(129.58,-118.627836,-7.5E-02)); +#478803 = CIRCLE('',#478804,6.000000000041E-02); +#478804 = AXIS2_PLACEMENT_3D('',#478805,#478806,#478807); +#478805 = CARTESIAN_POINT('',(129.64,-118.6278362255,-7.5E-02)); +#478806 = DIRECTION('',(0.,0.,-1.)); +#478807 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#478808 = ORIENTED_EDGE('',*,*,#478809,.T.); +#478809 = EDGE_CURVE('',#478801,#478810,#478812,.T.); +#478810 = VERTEX_POINT('',#478811); +#478811 = CARTESIAN_POINT('',(129.58,-118.412164,-7.5E-02)); +#478812 = LINE('',#478813,#478814); +#478813 = CARTESIAN_POINT('',(129.58,-118.627836,-7.5E-02)); +#478814 = VECTOR('',#478815,1.); +#478815 = DIRECTION('',(0.,1.,0.)); +#478816 = ORIENTED_EDGE('',*,*,#478817,.T.); +#478817 = EDGE_CURVE('',#478810,#478782,#478818,.T.); +#478818 = LINE('',#478819,#478820); +#478819 = CARTESIAN_POINT('',(129.58,-118.412164,-7.5E-02)); +#478820 = VECTOR('',#478821,1.); +#478821 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#478822 = PLANE('',#478823); +#478823 = AXIS2_PLACEMENT_3D('',#478824,#478825,#478826); +#478824 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478825 = DIRECTION('',(-0.,-0.,-1.)); +#478826 = DIRECTION('',(-1.,0.,0.)); +#478827 = SHELL_BASED_SURFACE_MODEL('',(#478828)); +#478828 = OPEN_SHELL('',(#478829)); +#478829 = ADVANCED_FACE('',(#478830),#478874,.T.); +#478830 = FACE_BOUND('',#478831,.T.); +#478831 = EDGE_LOOP('',(#478832,#478843,#478851,#478860,#478868)); +#478832 = ORIENTED_EDGE('',*,*,#478833,.T.); +#478833 = EDGE_CURVE('',#478834,#478836,#478838,.T.); +#478834 = VERTEX_POINT('',#478835); +#478835 = CARTESIAN_POINT('',(130.304567,-118.389203,-7.5E-02)); +#478836 = VERTEX_POINT('',#478837); +#478837 = CARTESIAN_POINT('',(130.42,-118.412164,-7.5E-02)); +#478838 = CIRCLE('',#478839,6.000007318647E-02); +#478839 = AXIS2_PLACEMENT_3D('',#478840,#478841,#478842); +#478840 = CARTESIAN_POINT('',(130.35999992681,-118.4121638233,-7.5E-02) + ); +#478841 = DIRECTION('',(0.,0.,-1.)); +#478842 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#478843 = ORIENTED_EDGE('',*,*,#478844,.T.); +#478844 = EDGE_CURVE('',#478836,#478845,#478847,.T.); +#478845 = VERTEX_POINT('',#478846); +#478846 = CARTESIAN_POINT('',(130.42,-118.627836,-7.5E-02)); +#478847 = LINE('',#478848,#478849); +#478848 = CARTESIAN_POINT('',(130.42,-118.412164,-7.5E-02)); +#478849 = VECTOR('',#478850,1.); +#478850 = DIRECTION('',(0.,-1.,0.)); +#478851 = ORIENTED_EDGE('',*,*,#478852,.T.); +#478852 = EDGE_CURVE('',#478845,#478853,#478855,.T.); +#478853 = VERTEX_POINT('',#478854); +#478854 = CARTESIAN_POINT('',(130.3,-118.627836,-7.5E-02)); +#478855 = CIRCLE('',#478856,6.000000000042E-02); +#478856 = AXIS2_PLACEMENT_3D('',#478857,#478858,#478859); +#478857 = CARTESIAN_POINT('',(130.36,-118.6278362255,-7.5E-02)); +#478858 = DIRECTION('',(0.,0.,-1.)); +#478859 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#478860 = ORIENTED_EDGE('',*,*,#478861,.T.); +#478861 = EDGE_CURVE('',#478853,#478862,#478864,.T.); +#478862 = VERTEX_POINT('',#478863); +#478863 = CARTESIAN_POINT('',(130.3,-118.412164,-7.5E-02)); +#478864 = LINE('',#478865,#478866); +#478865 = CARTESIAN_POINT('',(130.3,-118.627836,-7.5E-02)); +#478866 = VECTOR('',#478867,1.); +#478867 = DIRECTION('',(0.,1.,0.)); +#478868 = ORIENTED_EDGE('',*,*,#478869,.T.); +#478869 = EDGE_CURVE('',#478862,#478834,#478870,.T.); +#478870 = LINE('',#478871,#478872); +#478871 = CARTESIAN_POINT('',(130.3,-118.412164,-7.5E-02)); +#478872 = VECTOR('',#478873,1.); +#478873 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#478874 = PLANE('',#478875); +#478875 = AXIS2_PLACEMENT_3D('',#478876,#478877,#478878); +#478876 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478877 = DIRECTION('',(-0.,-0.,-1.)); +#478878 = DIRECTION('',(-1.,0.,0.)); +#478879 = SHELL_BASED_SURFACE_MODEL('',(#478880)); +#478880 = OPEN_SHELL('',(#478881)); +#478881 = ADVANCED_FACE('',(#478882),#478976,.T.); +#478882 = FACE_BOUND('',#478883,.T.); +#478883 = EDGE_LOOP('',(#478884,#478895,#478903,#478912,#478920,#478929, + #478937,#478946,#478954,#478962,#478970)); +#478884 = ORIENTED_EDGE('',*,*,#478885,.T.); +#478885 = EDGE_CURVE('',#478886,#478888,#478890,.T.); +#478886 = VERTEX_POINT('',#478887); +#478887 = CARTESIAN_POINT('',(150.267067,-117.537039,-7.5E-02)); +#478888 = VERTEX_POINT('',#478889); +#478889 = CARTESIAN_POINT('',(150.3825,-117.56,-7.5E-02)); +#478890 = CIRCLE('',#478891,6.000007318647E-02); +#478891 = AXIS2_PLACEMENT_3D('',#478892,#478893,#478894); +#478892 = CARTESIAN_POINT('',(150.32249992681,-117.5599998233,-7.5E-02) + ); +#478893 = DIRECTION('',(0.,0.,-1.)); +#478894 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#478895 = ORIENTED_EDGE('',*,*,#478896,.T.); +#478896 = EDGE_CURVE('',#478888,#478897,#478899,.T.); +#478897 = VERTEX_POINT('',#478898); +#478898 = CARTESIAN_POINT('',(150.3825,-118.56,-7.5E-02)); +#478899 = LINE('',#478900,#478901); +#478900 = CARTESIAN_POINT('',(150.3825,-117.56,-7.5E-02)); +#478901 = VECTOR('',#478902,1.); +#478902 = DIRECTION('',(0.,-1.,0.)); +#478903 = ORIENTED_EDGE('',*,*,#478904,.T.); +#478904 = EDGE_CURVE('',#478897,#478905,#478907,.T.); +#478905 = VERTEX_POINT('',#478906); +#478906 = CARTESIAN_POINT('',(150.3225,-118.62,-7.5E-02)); +#478907 = CIRCLE('',#478908,5.999932016256E-02); +#478908 = AXIS2_PLACEMENT_3D('',#478909,#478910,#478911); +#478909 = CARTESIAN_POINT('',(150.32250067984,-118.5600006798,-7.5E-02) + ); +#478910 = DIRECTION('',(0.,0.,-1.)); +#478911 = DIRECTION('',(0.999999999936,1.133081683198E-05,0.)); +#478912 = ORIENTED_EDGE('',*,*,#478913,.T.); +#478913 = EDGE_CURVE('',#478905,#478914,#478916,.T.); +#478914 = VERTEX_POINT('',#478915); +#478915 = CARTESIAN_POINT('',(148.8025,-118.62,-7.5E-02)); +#478916 = LINE('',#478917,#478918); +#478917 = CARTESIAN_POINT('',(150.3225,-118.62,-7.5E-02)); +#478918 = VECTOR('',#478919,1.); +#478919 = DIRECTION('',(-1.,0.,0.)); +#478920 = ORIENTED_EDGE('',*,*,#478921,.T.); +#478921 = EDGE_CURVE('',#478914,#478922,#478924,.T.); +#478922 = VERTEX_POINT('',#478923); +#478923 = CARTESIAN_POINT('',(148.7425,-118.56,-7.5E-02)); +#478924 = CIRCLE('',#478925,5.999932016262E-02); +#478925 = AXIS2_PLACEMENT_3D('',#478926,#478927,#478928); +#478926 = CARTESIAN_POINT('',(148.80249932015,-118.5600006798,-7.5E-02) + ); +#478927 = DIRECTION('',(0.,0.,-1.)); +#478928 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#478929 = ORIENTED_EDGE('',*,*,#478930,.T.); +#478930 = EDGE_CURVE('',#478922,#478931,#478933,.T.); +#478931 = VERTEX_POINT('',#478932); +#478932 = CARTESIAN_POINT('',(148.7425,-118.51,-7.5E-02)); +#478933 = LINE('',#478934,#478935); +#478934 = CARTESIAN_POINT('',(148.7425,-118.56,-7.5E-02)); +#478935 = VECTOR('',#478936,1.); +#478936 = DIRECTION('',(0.,1.,0.)); +#478937 = ORIENTED_EDGE('',*,*,#478938,.T.); +#478938 = EDGE_CURVE('',#478931,#478939,#478941,.T.); +#478939 = VERTEX_POINT('',#478940); +#478940 = CARTESIAN_POINT('',(148.857933,-118.487039,-7.5E-02)); +#478941 = CIRCLE('',#478942,6.000007318647E-02); +#478942 = AXIS2_PLACEMENT_3D('',#478943,#478944,#478945); +#478943 = CARTESIAN_POINT('',(148.80250007318,-118.5099998233,-7.5E-02) + ); +#478944 = DIRECTION('',(0.,0.,-1.)); +#478945 = DIRECTION('',(-0.999999999996,-2.944769722129E-06,-0.)); +#478946 = ORIENTED_EDGE('',*,*,#478947,.T.); +#478947 = EDGE_CURVE('',#478939,#478948,#478950,.T.); +#478948 = VERTEX_POINT('',#478949); +#478949 = CARTESIAN_POINT('',(148.860511,-118.5,-7.5E-02)); +#478950 = LINE('',#478951,#478952); +#478951 = CARTESIAN_POINT('',(148.857933,-118.487039,-7.5E-02)); +#478952 = VECTOR('',#478953,1.); +#478953 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#478954 = ORIENTED_EDGE('',*,*,#478955,.T.); +#478955 = EDGE_CURVE('',#478948,#478956,#478958,.T.); +#478956 = VERTEX_POINT('',#478957); +#478957 = CARTESIAN_POINT('',(150.2625,-118.5,-7.5E-02)); +#478958 = LINE('',#478959,#478960); +#478959 = CARTESIAN_POINT('',(148.860511,-118.5,-7.5E-02)); +#478960 = VECTOR('',#478961,1.); +#478961 = DIRECTION('',(1.,0.,0.)); +#478962 = ORIENTED_EDGE('',*,*,#478963,.T.); +#478963 = EDGE_CURVE('',#478956,#478964,#478966,.T.); +#478964 = VERTEX_POINT('',#478965); +#478965 = CARTESIAN_POINT('',(150.2625,-117.56,-7.5E-02)); +#478966 = LINE('',#478967,#478968); +#478967 = CARTESIAN_POINT('',(150.2625,-118.5,-7.5E-02)); +#478968 = VECTOR('',#478969,1.); +#478969 = DIRECTION('',(0.,1.,0.)); +#478970 = ORIENTED_EDGE('',*,*,#478971,.T.); +#478971 = EDGE_CURVE('',#478964,#478886,#478972,.T.); +#478972 = LINE('',#478973,#478974); +#478973 = CARTESIAN_POINT('',(150.2625,-117.56,-7.5E-02)); +#478974 = VECTOR('',#478975,1.); +#478975 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#478976 = PLANE('',#478977); +#478977 = AXIS2_PLACEMENT_3D('',#478978,#478979,#478980); +#478978 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478979 = DIRECTION('',(-0.,-0.,-1.)); +#478980 = DIRECTION('',(-1.,0.,0.)); +#478981 = SHELL_BASED_SURFACE_MODEL('',(#478982)); +#478982 = OPEN_SHELL('',(#478983)); +#478983 = ADVANCED_FACE('',(#478984),#478995,.T.); +#478984 = FACE_BOUND('',#478985,.F.); +#478985 = EDGE_LOOP('',(#478986)); +#478986 = ORIENTED_EDGE('',*,*,#478987,.T.); +#478987 = EDGE_CURVE('',#478988,#478988,#478990,.T.); +#478988 = VERTEX_POINT('',#478989); +#478989 = CARTESIAN_POINT('',(135.15,-118.2,-7.5E-02)); +#478990 = CIRCLE('',#478991,0.2); +#478991 = AXIS2_PLACEMENT_3D('',#478992,#478993,#478994); +#478992 = CARTESIAN_POINT('',(134.95,-118.2,-7.5E-02)); +#478993 = DIRECTION('',(0.,0.,1.)); +#478994 = DIRECTION('',(1.,0.,-0.)); +#478995 = PLANE('',#478996); +#478996 = AXIS2_PLACEMENT_3D('',#478997,#478998,#478999); +#478997 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#478998 = DIRECTION('',(-0.,-0.,-1.)); +#478999 = DIRECTION('',(-1.,0.,0.)); +#479000 = SHELL_BASED_SURFACE_MODEL('',(#479001)); +#479001 = OPEN_SHELL('',(#479002)); +#479002 = ADVANCED_FACE('',(#479003),#479152,.T.); +#479003 = FACE_BOUND('',#479004,.T.); +#479004 = EDGE_LOOP('',(#479005,#479016,#479024,#479033,#479041,#479049, + #479057,#479065,#479073,#479081,#479089,#479098,#479106,#479114, + #479122,#479130,#479138,#479146)); +#479005 = ORIENTED_EDGE('',*,*,#479006,.T.); +#479006 = EDGE_CURVE('',#479007,#479009,#479011,.T.); +#479007 = VERTEX_POINT('',#479008); +#479008 = CARTESIAN_POINT('',(153.072419,-117.906265,-7.5E-02)); +#479009 = VERTEX_POINT('',#479010); +#479010 = CARTESIAN_POINT('',(153.072419,-117.806265,-7.5E-02)); +#479011 = CIRCLE('',#479012,5.000000000003E-02); +#479012 = AXIS2_PLACEMENT_3D('',#479013,#479014,#479015); +#479013 = CARTESIAN_POINT('',(153.07241904771,-117.856265,-7.5E-02)); +#479014 = DIRECTION('',(0.,0.,-1.)); +#479015 = DIRECTION('',(-9.542372936263E-07,-1.,-0.)); +#479016 = ORIENTED_EDGE('',*,*,#479017,.T.); +#479017 = EDGE_CURVE('',#479009,#479018,#479020,.T.); +#479018 = VERTEX_POINT('',#479019); +#479019 = CARTESIAN_POINT('',(154.072419,-117.806265,-7.5E-02)); +#479020 = LINE('',#479021,#479022); +#479021 = CARTESIAN_POINT('',(153.072419,-117.806265,-7.5E-02)); +#479022 = VECTOR('',#479023,1.); +#479023 = DIRECTION('',(1.,0.,0.)); +#479024 = ORIENTED_EDGE('',*,*,#479025,.T.); +#479025 = EDGE_CURVE('',#479018,#479026,#479028,.T.); +#479026 = VERTEX_POINT('',#479027); +#479027 = CARTESIAN_POINT('',(154.072419,-117.906265,-7.5E-02)); +#479028 = CIRCLE('',#479029,5.000000000003E-02); +#479029 = AXIS2_PLACEMENT_3D('',#479030,#479031,#479032); +#479030 = CARTESIAN_POINT('',(154.07241895228,-117.856265,-7.5E-02)); +#479031 = DIRECTION('',(0.,0.,-1.)); +#479032 = DIRECTION('',(9.542361567576E-07,1.,0.)); +#479033 = ORIENTED_EDGE('',*,*,#479034,.T.); +#479034 = EDGE_CURVE('',#479026,#479035,#479037,.T.); +#479035 = VERTEX_POINT('',#479036); +#479036 = CARTESIAN_POINT('',(153.521701,-117.906265,-7.5E-02)); +#479037 = LINE('',#479038,#479039); +#479038 = CARTESIAN_POINT('',(154.072419,-117.906265,-7.5E-02)); +#479039 = VECTOR('',#479040,1.); +#479040 = DIRECTION('',(-1.,0.,0.)); +#479041 = ORIENTED_EDGE('',*,*,#479042,.T.); +#479042 = EDGE_CURVE('',#479035,#479043,#479045,.T.); +#479043 = VERTEX_POINT('',#479044); +#479044 = CARTESIAN_POINT('',(153.494463,-117.933501,-7.5E-02)); +#479045 = LINE('',#479046,#479047); +#479046 = CARTESIAN_POINT('',(153.521701,-117.906265,-7.5E-02)); +#479047 = VECTOR('',#479048,1.); +#479048 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#479049 = ORIENTED_EDGE('',*,*,#479050,.T.); +#479050 = EDGE_CURVE('',#479043,#479051,#479053,.T.); +#479051 = VERTEX_POINT('',#479052); +#479052 = CARTESIAN_POINT('',(153.455752,-118.010925,-7.5E-02)); +#479053 = LINE('',#479054,#479055); +#479054 = CARTESIAN_POINT('',(153.494463,-117.933501,-7.5E-02)); +#479055 = VECTOR('',#479056,1.); +#479056 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#479057 = ORIENTED_EDGE('',*,*,#479058,.T.); +#479058 = EDGE_CURVE('',#479051,#479059,#479061,.T.); +#479059 = VERTEX_POINT('',#479060); +#479060 = CARTESIAN_POINT('',(153.455752,-118.130176,-7.5E-02)); +#479061 = LINE('',#479062,#479063); +#479062 = CARTESIAN_POINT('',(153.455752,-118.010925,-7.5E-02)); +#479063 = VECTOR('',#479064,1.); +#479064 = DIRECTION('',(0.,-1.,0.)); +#479065 = ORIENTED_EDGE('',*,*,#479066,.T.); +#479066 = EDGE_CURVE('',#479059,#479067,#479069,.T.); +#479067 = VERTEX_POINT('',#479068); +#479068 = CARTESIAN_POINT('',(153.490638,-118.199949,-7.5E-02)); +#479069 = LINE('',#479070,#479071); +#479070 = CARTESIAN_POINT('',(153.455752,-118.130176,-7.5E-02)); +#479071 = VECTOR('',#479072,1.); +#479072 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#479073 = ORIENTED_EDGE('',*,*,#479074,.T.); +#479074 = EDGE_CURVE('',#479067,#479075,#479077,.T.); +#479075 = VERTEX_POINT('',#479076); +#479076 = CARTESIAN_POINT('',(153.560413,-118.234836,-7.5E-02)); +#479077 = LINE('',#479078,#479079); +#479078 = CARTESIAN_POINT('',(153.490638,-118.199949,-7.5E-02)); +#479079 = VECTOR('',#479080,1.); +#479080 = DIRECTION('',(0.89442975474,-0.447208467984,0.)); +#479081 = ORIENTED_EDGE('',*,*,#479082,.T.); +#479082 = EDGE_CURVE('',#479075,#479083,#479085,.T.); +#479083 = VERTEX_POINT('',#479084); +#479084 = CARTESIAN_POINT('',(154.072419,-118.234836,-7.5E-02)); +#479085 = LINE('',#479086,#479087); +#479086 = CARTESIAN_POINT('',(153.560413,-118.234836,-7.5E-02)); +#479087 = VECTOR('',#479088,1.); +#479088 = DIRECTION('',(1.,0.,0.)); +#479089 = ORIENTED_EDGE('',*,*,#479090,.T.); +#479090 = EDGE_CURVE('',#479083,#479091,#479093,.T.); +#479091 = VERTEX_POINT('',#479092); +#479092 = CARTESIAN_POINT('',(154.072419,-118.334836,-7.5E-02)); +#479093 = CIRCLE('',#479094,5.000000000002E-02); +#479094 = AXIS2_PLACEMENT_3D('',#479095,#479096,#479097); +#479095 = CARTESIAN_POINT('',(154.07241895228,-118.284836,-7.5E-02)); +#479096 = DIRECTION('',(0.,0.,-1.)); +#479097 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#479098 = ORIENTED_EDGE('',*,*,#479099,.T.); +#479099 = EDGE_CURVE('',#479091,#479100,#479102,.T.); +#479100 = VERTEX_POINT('',#479101); +#479101 = CARTESIAN_POINT('',(153.537336,-118.332593,-7.5E-02)); +#479102 = LINE('',#479103,#479104); +#479103 = CARTESIAN_POINT('',(154.072419,-118.334836,-7.5E-02)); +#479104 = VECTOR('',#479105,1.); +#479105 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#479106 = ORIENTED_EDGE('',*,*,#479107,.T.); +#479107 = EDGE_CURVE('',#479100,#479108,#479110,.T.); +#479108 = VERTEX_POINT('',#479109); +#479109 = CARTESIAN_POINT('',(153.420611,-118.274989,-7.5E-02)); +#479110 = LINE('',#479111,#479112); +#479111 = CARTESIAN_POINT('',(153.537336,-118.332593,-7.5E-02)); +#479112 = VECTOR('',#479113,1.); +#479113 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#479114 = ORIENTED_EDGE('',*,*,#479115,.T.); +#479115 = EDGE_CURVE('',#479108,#479116,#479118,.T.); +#479116 = VERTEX_POINT('',#479117); +#479117 = CARTESIAN_POINT('',(153.408649,-118.259577,-7.5E-02)); +#479118 = LINE('',#479119,#479120); +#479119 = CARTESIAN_POINT('',(153.420611,-118.274989,-7.5E-02)); +#479120 = VECTOR('',#479121,1.); +#479121 = DIRECTION('',(-0.613138319011,0.789975570356,0.)); +#479122 = ORIENTED_EDGE('',*,*,#479123,.T.); +#479123 = EDGE_CURVE('',#479116,#479124,#479126,.T.); +#479124 = VERTEX_POINT('',#479125); +#479125 = CARTESIAN_POINT('',(153.357994,-118.153251,-7.5E-02)); +#479126 = LINE('',#479127,#479128); +#479127 = CARTESIAN_POINT('',(153.408649,-118.259577,-7.5E-02)); +#479128 = VECTOR('',#479129,1.); +#479129 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#479130 = ORIENTED_EDGE('',*,*,#479131,.T.); +#479131 = EDGE_CURVE('',#479124,#479132,#479134,.T.); +#479132 = VERTEX_POINT('',#479133); +#479133 = CARTESIAN_POINT('',(153.357994,-117.987849,-7.5E-02)); +#479134 = LINE('',#479135,#479136); +#479135 = CARTESIAN_POINT('',(153.357994,-118.153251,-7.5E-02)); +#479136 = VECTOR('',#479137,1.); +#479137 = DIRECTION('',(0.,1.,0.)); +#479138 = ORIENTED_EDGE('',*,*,#479139,.T.); +#479139 = EDGE_CURVE('',#479132,#479140,#479142,.T.); +#479140 = VERTEX_POINT('',#479141); +#479141 = CARTESIAN_POINT('',(153.396279,-117.906265,-7.5E-02)); +#479142 = LINE('',#479143,#479144); +#479143 = CARTESIAN_POINT('',(153.357994,-117.987849,-7.5E-02)); +#479144 = VECTOR('',#479145,1.); +#479145 = DIRECTION('',(0.42482047438,0.90527761739,0.)); +#479146 = ORIENTED_EDGE('',*,*,#479147,.T.); +#479147 = EDGE_CURVE('',#479140,#479007,#479148,.T.); +#479148 = LINE('',#479149,#479150); +#479149 = CARTESIAN_POINT('',(153.396279,-117.906265,-7.5E-02)); +#479150 = VECTOR('',#479151,1.); +#479151 = DIRECTION('',(-1.,0.,0.)); +#479152 = PLANE('',#479153); +#479153 = AXIS2_PLACEMENT_3D('',#479154,#479155,#479156); +#479154 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479155 = DIRECTION('',(-0.,-0.,-1.)); +#479156 = DIRECTION('',(-1.,0.,0.)); +#479157 = SHELL_BASED_SURFACE_MODEL('',(#479158)); +#479158 = OPEN_SHELL('',(#479159)); +#479159 = ADVANCED_FACE('',(#479160),#479243,.T.); +#479160 = FACE_BOUND('',#479161,.T.); +#479161 = EDGE_LOOP('',(#479162,#479173,#479181,#479189,#479197,#479205, + #479213,#479221,#479229,#479237)); +#479162 = ORIENTED_EDGE('',*,*,#479163,.T.); +#479163 = EDGE_CURVE('',#479164,#479166,#479168,.T.); +#479164 = VERTEX_POINT('',#479165); +#479165 = CARTESIAN_POINT('',(151.474738,-117.678053,-7.5E-02)); +#479166 = VERTEX_POINT('',#479167); +#479167 = CARTESIAN_POINT('',(151.545449,-117.678053,-7.5E-02)); +#479168 = CIRCLE('',#479169,4.999898289281E-02); +#479169 = AXIS2_PLACEMENT_3D('',#479170,#479171,#479172); +#479170 = CARTESIAN_POINT('',(151.5100935,-117.7134067396,-7.5E-02)); +#479171 = DIRECTION('',(0.,0.,-1.)); +#479172 = DIRECTION('',(-0.707124384426,0.707089177509,0.)); +#479173 = ORIENTED_EDGE('',*,*,#479174,.T.); +#479174 = EDGE_CURVE('',#479166,#479175,#479177,.T.); +#479175 = VERTEX_POINT('',#479176); +#479176 = CARTESIAN_POINT('',(151.603907,-117.741893,-7.5E-02)); +#479177 = LINE('',#479178,#479179); +#479178 = CARTESIAN_POINT('',(151.545449,-117.678053,-7.5E-02)); +#479179 = VECTOR('',#479180,1.); +#479180 = DIRECTION('',(0.675335324481,-0.737510813146,0.)); +#479181 = ORIENTED_EDGE('',*,*,#479182,.T.); +#479182 = EDGE_CURVE('',#479175,#479183,#479185,.T.); +#479183 = VERTEX_POINT('',#479184); +#479184 = CARTESIAN_POINT('',(151.603907,-117.780162,-7.5E-02)); +#479185 = LINE('',#479186,#479187); +#479186 = CARTESIAN_POINT('',(151.603907,-117.741893,-7.5E-02)); +#479187 = VECTOR('',#479188,1.); +#479188 = DIRECTION('',(0.,-1.,0.)); +#479189 = ORIENTED_EDGE('',*,*,#479190,.T.); +#479190 = EDGE_CURVE('',#479183,#479191,#479193,.T.); +#479191 = VERTEX_POINT('',#479192); +#479192 = CARTESIAN_POINT('',(151.545449,-117.844001,-7.5E-02)); +#479193 = LINE('',#479194,#479195); +#479194 = CARTESIAN_POINT('',(151.603907,-117.780162,-7.5E-02)); +#479195 = VECTOR('',#479196,1.); +#479196 = DIRECTION('',(-0.675341078424,-0.737505544246,0.)); +#479197 = ORIENTED_EDGE('',*,*,#479198,.T.); +#479198 = EDGE_CURVE('',#479191,#479199,#479201,.T.); +#479199 = VERTEX_POINT('',#479200); +#479200 = CARTESIAN_POINT('',(151.529228,-117.85484,-7.5E-02)); +#479201 = LINE('',#479202,#479203); +#479202 = CARTESIAN_POINT('',(151.545449,-117.844001,-7.5E-02)); +#479203 = VECTOR('',#479204,1.); +#479204 = DIRECTION('',(-0.831458381235,-0.555587041132,0.)); +#479205 = ORIENTED_EDGE('',*,*,#479206,.T.); +#479206 = EDGE_CURVE('',#479199,#479207,#479209,.T.); +#479207 = VERTEX_POINT('',#479208); +#479208 = CARTESIAN_POINT('',(151.490959,-117.85484,-7.5E-02)); +#479209 = LINE('',#479210,#479211); +#479210 = CARTESIAN_POINT('',(151.529228,-117.85484,-7.5E-02)); +#479211 = VECTOR('',#479212,1.); +#479212 = DIRECTION('',(-1.,0.,0.)); +#479213 = ORIENTED_EDGE('',*,*,#479214,.T.); +#479214 = EDGE_CURVE('',#479207,#479215,#479217,.T.); +#479215 = VERTEX_POINT('',#479216); +#479216 = CARTESIAN_POINT('',(151.42712,-117.796382,-7.5E-02)); +#479217 = LINE('',#479218,#479219); +#479218 = CARTESIAN_POINT('',(151.490959,-117.85484,-7.5E-02)); +#479219 = VECTOR('',#479220,1.); +#479220 = DIRECTION('',(-0.737505544246,0.675341078424,0.)); +#479221 = ORIENTED_EDGE('',*,*,#479222,.T.); +#479222 = EDGE_CURVE('',#479215,#479223,#479225,.T.); +#479223 = VERTEX_POINT('',#479224); +#479224 = CARTESIAN_POINT('',(151.416281,-117.780161,-7.5E-02)); +#479225 = LINE('',#479226,#479227); +#479226 = CARTESIAN_POINT('',(151.42712,-117.796382,-7.5E-02)); +#479227 = VECTOR('',#479228,1.); +#479228 = DIRECTION('',(-0.555587041133,0.831458381235,0.)); +#479229 = ORIENTED_EDGE('',*,*,#479230,.T.); +#479230 = EDGE_CURVE('',#479223,#479231,#479233,.T.); +#479231 = VERTEX_POINT('',#479232); +#479232 = CARTESIAN_POINT('',(151.416282,-117.741892,-7.5E-02)); +#479233 = LINE('',#479234,#479235); +#479234 = CARTESIAN_POINT('',(151.416281,-117.780161,-7.5E-02)); +#479235 = VECTOR('',#479236,1.); +#479236 = DIRECTION('',(2.613081076417E-05,0.999999999659,0.)); +#479237 = ORIENTED_EDGE('',*,*,#479238,.T.); +#479238 = EDGE_CURVE('',#479231,#479164,#479239,.T.); +#479239 = LINE('',#479240,#479241); +#479240 = CARTESIAN_POINT('',(151.416282,-117.741892,-7.5E-02)); +#479241 = VECTOR('',#479242,1.); +#479242 = DIRECTION('',(0.675328510893,0.73751705226,0.)); +#479243 = PLANE('',#479244); +#479244 = AXIS2_PLACEMENT_3D('',#479245,#479246,#479247); +#479245 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479246 = DIRECTION('',(-0.,-0.,-1.)); +#479247 = DIRECTION('',(-1.,0.,0.)); +#479248 = SHELL_BASED_SURFACE_MODEL('',(#479249)); +#479249 = OPEN_SHELL('',(#479250)); +#479250 = ADVANCED_FACE('',(#479251),#479287,.T.); +#479251 = FACE_BOUND('',#479252,.T.); +#479252 = EDGE_LOOP('',(#479253,#479264,#479272,#479281)); +#479253 = ORIENTED_EDGE('',*,*,#479254,.T.); +#479254 = EDGE_CURVE('',#479255,#479257,#479259,.T.); +#479255 = VERTEX_POINT('',#479256); +#479256 = CARTESIAN_POINT('',(151.795808,-117.811027,-7.5E-02)); +#479257 = VERTEX_POINT('',#479258); +#479258 = CARTESIAN_POINT('',(151.795808,-117.711027,-7.5E-02)); +#479259 = CIRCLE('',#479260,5.000000000002E-02); +#479260 = AXIS2_PLACEMENT_3D('',#479261,#479262,#479263); +#479261 = CARTESIAN_POINT('',(151.79580804771,-117.761027,-7.5E-02)); +#479262 = DIRECTION('',(0.,0.,-1.)); +#479263 = DIRECTION('',(-9.542367251921E-07,-1.,-0.)); +#479264 = ORIENTED_EDGE('',*,*,#479265,.T.); +#479265 = EDGE_CURVE('',#479257,#479266,#479268,.T.); +#479266 = VERTEX_POINT('',#479267); +#479267 = CARTESIAN_POINT('',(152.462475,-117.711027,-7.5E-02)); +#479268 = LINE('',#479269,#479270); +#479269 = CARTESIAN_POINT('',(151.795808,-117.711027,-7.5E-02)); +#479270 = VECTOR('',#479271,1.); +#479271 = DIRECTION('',(1.,0.,0.)); +#479272 = ORIENTED_EDGE('',*,*,#479273,.T.); +#479273 = EDGE_CURVE('',#479266,#479274,#479276,.T.); +#479274 = VERTEX_POINT('',#479275); +#479275 = CARTESIAN_POINT('',(152.462475,-117.811027,-7.5E-02)); +#479276 = CIRCLE('',#479277,5.000000000003E-02); +#479277 = AXIS2_PLACEMENT_3D('',#479278,#479279,#479280); +#479278 = CARTESIAN_POINT('',(152.46247495228,-117.761027,-7.5E-02)); +#479279 = DIRECTION('',(0.,0.,-1.)); +#479280 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#479281 = ORIENTED_EDGE('',*,*,#479282,.T.); +#479282 = EDGE_CURVE('',#479274,#479255,#479283,.T.); +#479283 = LINE('',#479284,#479285); +#479284 = CARTESIAN_POINT('',(152.462475,-117.811027,-7.5E-02)); +#479285 = VECTOR('',#479286,1.); +#479286 = DIRECTION('',(-1.,0.,0.)); +#479287 = PLANE('',#479288); +#479288 = AXIS2_PLACEMENT_3D('',#479289,#479290,#479291); +#479289 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479290 = DIRECTION('',(-0.,-0.,-1.)); +#479291 = DIRECTION('',(-1.,0.,0.)); +#479292 = SHELL_BASED_SURFACE_MODEL('',(#479293)); +#479293 = OPEN_SHELL('',(#479294)); +#479294 = ADVANCED_FACE('',(#479295),#479331,.T.); +#479295 = FACE_BOUND('',#479296,.T.); +#479296 = EDGE_LOOP('',(#479297,#479308,#479316,#479325)); +#479297 = ORIENTED_EDGE('',*,*,#479298,.T.); +#479298 = EDGE_CURVE('',#479299,#479301,#479303,.T.); +#479299 = VERTEX_POINT('',#479300); +#479300 = CARTESIAN_POINT('',(138.688748,-117.795,-7.5E-02)); +#479301 = VERTEX_POINT('',#479302); +#479302 = CARTESIAN_POINT('',(138.688748,-117.675,-7.5E-02)); +#479303 = CIRCLE('',#479304,6.000000000043E-02); +#479304 = AXIS2_PLACEMENT_3D('',#479305,#479306,#479307); +#479305 = CARTESIAN_POINT('',(138.68874777441,-117.735,-7.5E-02)); +#479306 = DIRECTION('',(0.,0.,-1.)); +#479307 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#479308 = ORIENTED_EDGE('',*,*,#479309,.T.); +#479309 = EDGE_CURVE('',#479301,#479310,#479312,.T.); +#479310 = VERTEX_POINT('',#479311); +#479311 = CARTESIAN_POINT('',(139.211252,-117.675,-7.5E-02)); +#479312 = LINE('',#479313,#479314); +#479313 = CARTESIAN_POINT('',(138.688748,-117.675,-7.5E-02)); +#479314 = VECTOR('',#479315,1.); +#479315 = DIRECTION('',(1.,0.,0.)); +#479316 = ORIENTED_EDGE('',*,*,#479317,.T.); +#479317 = EDGE_CURVE('',#479310,#479318,#479320,.T.); +#479318 = VERTEX_POINT('',#479319); +#479319 = CARTESIAN_POINT('',(139.211252,-117.795,-7.5E-02)); +#479320 = CIRCLE('',#479321,6.000000000043E-02); +#479321 = AXIS2_PLACEMENT_3D('',#479322,#479323,#479324); +#479322 = CARTESIAN_POINT('',(139.21125222558,-117.735,-7.5E-02)); +#479323 = DIRECTION('',(0.,0.,-1.)); +#479324 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#479325 = ORIENTED_EDGE('',*,*,#479326,.T.); +#479326 = EDGE_CURVE('',#479318,#479299,#479327,.T.); +#479327 = LINE('',#479328,#479329); +#479328 = CARTESIAN_POINT('',(139.211252,-117.795,-7.5E-02)); +#479329 = VECTOR('',#479330,1.); +#479330 = DIRECTION('',(-1.,0.,0.)); +#479331 = PLANE('',#479332); +#479332 = AXIS2_PLACEMENT_3D('',#479333,#479334,#479335); +#479333 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479334 = DIRECTION('',(-0.,-0.,-1.)); +#479335 = DIRECTION('',(-1.,0.,0.)); +#479336 = SHELL_BASED_SURFACE_MODEL('',(#479337)); +#479337 = OPEN_SHELL('',(#479338)); +#479338 = ADVANCED_FACE('',(#479339),#479383,.T.); +#479339 = FACE_BOUND('',#479340,.T.); +#479340 = EDGE_LOOP('',(#479341,#479352,#479360,#479369,#479377)); +#479341 = ORIENTED_EDGE('',*,*,#479342,.T.); +#479342 = EDGE_CURVE('',#479343,#479345,#479347,.T.); +#479343 = VERTEX_POINT('',#479344); +#479344 = CARTESIAN_POINT('',(135.084567,-117.349203,-7.5E-02)); +#479345 = VERTEX_POINT('',#479346); +#479346 = CARTESIAN_POINT('',(135.2,-117.372164,-7.5E-02)); +#479347 = CIRCLE('',#479348,6.000007318647E-02); +#479348 = AXIS2_PLACEMENT_3D('',#479349,#479350,#479351); +#479349 = CARTESIAN_POINT('',(135.13999992681,-117.3721638233,-7.5E-02) + ); +#479350 = DIRECTION('',(0.,0.,-1.)); +#479351 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#479352 = ORIENTED_EDGE('',*,*,#479353,.T.); +#479353 = EDGE_CURVE('',#479345,#479354,#479356,.T.); +#479354 = VERTEX_POINT('',#479355); +#479355 = CARTESIAN_POINT('',(135.2,-117.587836,-7.5E-02)); +#479356 = LINE('',#479357,#479358); +#479357 = CARTESIAN_POINT('',(135.2,-117.372164,-7.5E-02)); +#479358 = VECTOR('',#479359,1.); +#479359 = DIRECTION('',(0.,-1.,0.)); +#479360 = ORIENTED_EDGE('',*,*,#479361,.T.); +#479361 = EDGE_CURVE('',#479354,#479362,#479364,.T.); +#479362 = VERTEX_POINT('',#479363); +#479363 = CARTESIAN_POINT('',(135.08,-117.587836,-7.5E-02)); +#479364 = CIRCLE('',#479365,6.00000000004E-02); +#479365 = AXIS2_PLACEMENT_3D('',#479366,#479367,#479368); +#479366 = CARTESIAN_POINT('',(135.14,-117.5878362255,-7.5E-02)); +#479367 = DIRECTION('',(0.,0.,-1.)); +#479368 = DIRECTION('',(0.999999999993,3.759794727381E-06,0.)); +#479369 = ORIENTED_EDGE('',*,*,#479370,.T.); +#479370 = EDGE_CURVE('',#479362,#479371,#479373,.T.); +#479371 = VERTEX_POINT('',#479372); +#479372 = CARTESIAN_POINT('',(135.08,-117.372164,-7.5E-02)); +#479373 = LINE('',#479374,#479375); +#479374 = CARTESIAN_POINT('',(135.08,-117.587836,-7.5E-02)); +#479375 = VECTOR('',#479376,1.); +#479376 = DIRECTION('',(0.,1.,0.)); +#479377 = ORIENTED_EDGE('',*,*,#479378,.T.); +#479378 = EDGE_CURVE('',#479371,#479343,#479379,.T.); +#479379 = LINE('',#479380,#479381); +#479380 = CARTESIAN_POINT('',(135.08,-117.372164,-7.5E-02)); +#479381 = VECTOR('',#479382,1.); +#479382 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#479383 = PLANE('',#479384); +#479384 = AXIS2_PLACEMENT_3D('',#479385,#479386,#479387); +#479385 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479386 = DIRECTION('',(-0.,-0.,-1.)); +#479387 = DIRECTION('',(-1.,0.,0.)); +#479388 = SHELL_BASED_SURFACE_MODEL('',(#479389)); +#479389 = OPEN_SHELL('',(#479390)); +#479390 = ADVANCED_FACE('',(#479391),#479435,.T.); +#479391 = FACE_BOUND('',#479392,.T.); +#479392 = EDGE_LOOP('',(#479393,#479404,#479412,#479421,#479429)); +#479393 = ORIENTED_EDGE('',*,*,#479394,.T.); +#479394 = EDGE_CURVE('',#479395,#479397,#479399,.T.); +#479395 = VERTEX_POINT('',#479396); +#479396 = CARTESIAN_POINT('',(135.804567,-117.349203,-7.5E-02)); +#479397 = VERTEX_POINT('',#479398); +#479398 = CARTESIAN_POINT('',(135.92,-117.372164,-7.5E-02)); +#479399 = CIRCLE('',#479400,6.000007318647E-02); +#479400 = AXIS2_PLACEMENT_3D('',#479401,#479402,#479403); +#479401 = CARTESIAN_POINT('',(135.85999992681,-117.3721638233,-7.5E-02) + ); +#479402 = DIRECTION('',(0.,0.,-1.)); +#479403 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#479404 = ORIENTED_EDGE('',*,*,#479405,.T.); +#479405 = EDGE_CURVE('',#479397,#479406,#479408,.T.); +#479406 = VERTEX_POINT('',#479407); +#479407 = CARTESIAN_POINT('',(135.92,-117.587836,-7.5E-02)); +#479408 = LINE('',#479409,#479410); +#479409 = CARTESIAN_POINT('',(135.92,-117.372164,-7.5E-02)); +#479410 = VECTOR('',#479411,1.); +#479411 = DIRECTION('',(0.,-1.,0.)); +#479412 = ORIENTED_EDGE('',*,*,#479413,.T.); +#479413 = EDGE_CURVE('',#479406,#479414,#479416,.T.); +#479414 = VERTEX_POINT('',#479415); +#479415 = CARTESIAN_POINT('',(135.8,-117.587836,-7.5E-02)); +#479416 = CIRCLE('',#479417,6.000000000041E-02); +#479417 = AXIS2_PLACEMENT_3D('',#479418,#479419,#479420); +#479418 = CARTESIAN_POINT('',(135.86,-117.5878362255,-7.5E-02)); +#479419 = DIRECTION('',(0.,0.,-1.)); +#479420 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#479421 = ORIENTED_EDGE('',*,*,#479422,.T.); +#479422 = EDGE_CURVE('',#479414,#479423,#479425,.T.); +#479423 = VERTEX_POINT('',#479424); +#479424 = CARTESIAN_POINT('',(135.8,-117.372164,-7.5E-02)); +#479425 = LINE('',#479426,#479427); +#479426 = CARTESIAN_POINT('',(135.8,-117.587836,-7.5E-02)); +#479427 = VECTOR('',#479428,1.); +#479428 = DIRECTION('',(0.,1.,0.)); +#479429 = ORIENTED_EDGE('',*,*,#479430,.T.); +#479430 = EDGE_CURVE('',#479423,#479395,#479431,.T.); +#479431 = LINE('',#479432,#479433); +#479432 = CARTESIAN_POINT('',(135.8,-117.372164,-7.5E-02)); +#479433 = VECTOR('',#479434,1.); +#479434 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#479435 = PLANE('',#479436); +#479436 = AXIS2_PLACEMENT_3D('',#479437,#479438,#479439); +#479437 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479438 = DIRECTION('',(-0.,-0.,-1.)); +#479439 = DIRECTION('',(-1.,0.,0.)); +#479440 = SHELL_BASED_SURFACE_MODEL('',(#479441)); +#479441 = OPEN_SHELL('',(#479442)); +#479442 = ADVANCED_FACE('',(#479443),#479609,.T.); +#479443 = FACE_BOUND('',#479444,.T.); +#479444 = EDGE_LOOP('',(#479445,#479456,#479464,#479472,#479480,#479488, + #479496,#479504,#479513,#479521,#479529,#479537,#479545,#479553, + #479562,#479570,#479578,#479587,#479595,#479603)); +#479445 = ORIENTED_EDGE('',*,*,#479446,.T.); +#479446 = EDGE_CURVE('',#479447,#479449,#479451,.T.); +#479447 = VERTEX_POINT('',#479448); +#479448 = CARTESIAN_POINT('',(153.359558,-117.122845,-7.5E-02)); +#479449 = VERTEX_POINT('',#479450); +#479450 = CARTESIAN_POINT('',(153.455752,-117.141979,-7.5E-02)); +#479451 = CIRCLE('',#479452,4.999998452109E-02); +#479452 = AXIS2_PLACEMENT_3D('',#479453,#479454,#479455); +#479453 = CARTESIAN_POINT('',(153.40575201547,-117.1419790373,-7.5E-02) + ); +#479454 = DIRECTION('',(0.,0.,-1.)); +#479455 = DIRECTION('',(-0.923880595592,0.382680865852,0.)); +#479456 = ORIENTED_EDGE('',*,*,#479457,.T.); +#479457 = EDGE_CURVE('',#479449,#479458,#479460,.T.); +#479458 = VERTEX_POINT('',#479459); +#479459 = CARTESIAN_POINT('',(153.455752,-117.234836,-7.5E-02)); +#479460 = LINE('',#479461,#479462); +#479461 = CARTESIAN_POINT('',(153.455752,-117.141979,-7.5E-02)); +#479462 = VECTOR('',#479463,1.); +#479463 = DIRECTION('',(0.,-1.,0.)); +#479464 = ORIENTED_EDGE('',*,*,#479465,.T.); +#479465 = EDGE_CURVE('',#479458,#479466,#479468,.T.); +#479466 = VERTEX_POINT('',#479467); +#479467 = CARTESIAN_POINT('',(153.940829,-117.237077,-7.5E-02)); +#479468 = LINE('',#479469,#479470); +#479469 = CARTESIAN_POINT('',(153.455752,-117.234836,-7.5E-02)); +#479470 = VECTOR('',#479471,1.); +#479471 = DIRECTION('',(0.999989328502,-4.619835789308E-03,0.)); +#479472 = ORIENTED_EDGE('',*,*,#479473,.T.); +#479473 = EDGE_CURVE('',#479466,#479474,#479476,.T.); +#479474 = VERTEX_POINT('',#479475); +#479475 = CARTESIAN_POINT('',(154.05756,-117.294682,-7.5E-02)); +#479476 = LINE('',#479477,#479478); +#479477 = CARTESIAN_POINT('',(153.940829,-117.237077,-7.5E-02)); +#479478 = VECTOR('',#479479,1.); +#479479 = DIRECTION('',(0.896751907126,-0.442533633825,0.)); +#479480 = ORIENTED_EDGE('',*,*,#479481,.T.); +#479481 = EDGE_CURVE('',#479474,#479482,#479484,.T.); +#479482 = VERTEX_POINT('',#479483); +#479483 = CARTESIAN_POINT('',(154.069521,-117.310094,-7.5E-02)); +#479484 = LINE('',#479485,#479486); +#479485 = CARTESIAN_POINT('',(154.05756,-117.294682,-7.5E-02)); +#479486 = VECTOR('',#479487,1.); +#479487 = DIRECTION('',(0.613106329879,-0.790000397634,0.)); +#479488 = ORIENTED_EDGE('',*,*,#479489,.T.); +#479489 = EDGE_CURVE('',#479482,#479490,#479492,.T.); +#479490 = VERTEX_POINT('',#479491); +#479491 = CARTESIAN_POINT('',(154.120176,-117.41642,-7.5E-02)); +#479492 = LINE('',#479493,#479494); +#479493 = CARTESIAN_POINT('',(154.069521,-117.310094,-7.5E-02)); +#479494 = VECTOR('',#479495,1.); +#479495 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#479496 = ORIENTED_EDGE('',*,*,#479497,.T.); +#479497 = EDGE_CURVE('',#479490,#479498,#479500,.T.); +#479498 = VERTEX_POINT('',#479499); +#479499 = CARTESIAN_POINT('',(154.122419,-117.522931,-7.5E-02)); +#479500 = LINE('',#479501,#479502); +#479501 = CARTESIAN_POINT('',(154.120176,-117.41642,-7.5E-02)); +#479502 = VECTOR('',#479503,1.); +#479503 = DIRECTION('',(2.105418977967E-02,-0.999778335979,0.)); +#479504 = ORIENTED_EDGE('',*,*,#479505,.T.); +#479505 = EDGE_CURVE('',#479498,#479506,#479508,.T.); +#479506 = VERTEX_POINT('',#479507); +#479507 = CARTESIAN_POINT('',(154.022419,-117.522931,-7.5E-02)); +#479508 = CIRCLE('',#479509,5.000000000002E-02); +#479509 = AXIS2_PLACEMENT_3D('',#479510,#479511,#479512); +#479510 = CARTESIAN_POINT('',(154.072419,-117.5229309522,-7.5E-02)); +#479511 = DIRECTION('',(-0.,0.,-1.)); +#479512 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#479513 = ORIENTED_EDGE('',*,*,#479514,.T.); +#479514 = EDGE_CURVE('',#479506,#479515,#479517,.T.); +#479515 = VERTEX_POINT('',#479516); +#479516 = CARTESIAN_POINT('',(154.022419,-117.439496,-7.5E-02)); +#479517 = LINE('',#479518,#479519); +#479518 = CARTESIAN_POINT('',(154.022419,-117.522931,-7.5E-02)); +#479519 = VECTOR('',#479520,1.); +#479520 = DIRECTION('',(0.,1.,0.)); +#479521 = ORIENTED_EDGE('',*,*,#479522,.T.); +#479522 = EDGE_CURVE('',#479515,#479523,#479525,.T.); +#479523 = VERTEX_POINT('',#479524); +#479524 = CARTESIAN_POINT('',(153.987532,-117.369722,-7.5E-02)); +#479525 = LINE('',#479526,#479527); +#479526 = CARTESIAN_POINT('',(154.022419,-117.439496,-7.5E-02)); +#479527 = VECTOR('',#479528,1.); +#479528 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#479529 = ORIENTED_EDGE('',*,*,#479530,.T.); +#479530 = EDGE_CURVE('',#479523,#479531,#479533,.T.); +#479531 = VERTEX_POINT('',#479532); +#479532 = CARTESIAN_POINT('',(153.917759,-117.334836,-7.5E-02)); +#479533 = LINE('',#479534,#479535); +#479534 = CARTESIAN_POINT('',(153.987532,-117.369722,-7.5E-02)); +#479535 = VECTOR('',#479536,1.); +#479536 = DIRECTION('',(-0.894429754813,0.447208467837,0.)); +#479537 = ORIENTED_EDGE('',*,*,#479538,.T.); +#479538 = EDGE_CURVE('',#479531,#479539,#479541,.T.); +#479539 = VERTEX_POINT('',#479540); +#479540 = CARTESIAN_POINT('',(153.455752,-117.334836,-7.5E-02)); +#479541 = LINE('',#479542,#479543); +#479542 = CARTESIAN_POINT('',(153.917759,-117.334836,-7.5E-02)); +#479543 = VECTOR('',#479544,1.); +#479544 = DIRECTION('',(-1.,0.,0.)); +#479545 = ORIENTED_EDGE('',*,*,#479546,.T.); +#479546 = EDGE_CURVE('',#479539,#479547,#479549,.T.); +#479547 = VERTEX_POINT('',#479548); +#479548 = CARTESIAN_POINT('',(153.455752,-117.522931,-7.5E-02)); +#479549 = LINE('',#479550,#479551); +#479550 = CARTESIAN_POINT('',(153.455752,-117.334836,-7.5E-02)); +#479551 = VECTOR('',#479552,1.); +#479552 = DIRECTION('',(0.,-1.,0.)); +#479553 = ORIENTED_EDGE('',*,*,#479554,.T.); +#479554 = EDGE_CURVE('',#479547,#479555,#479557,.T.); +#479555 = VERTEX_POINT('',#479556); +#479556 = CARTESIAN_POINT('',(153.355752,-117.522931,-7.5E-02)); +#479557 = CIRCLE('',#479558,5.000000000002E-02); +#479558 = AXIS2_PLACEMENT_3D('',#479559,#479560,#479561); +#479559 = CARTESIAN_POINT('',(153.405752,-117.5229309522,-7.5E-02)); +#479560 = DIRECTION('',(-0.,0.,-1.)); +#479561 = DIRECTION('',(1.,-9.542364409747E-07,-0.)); +#479562 = ORIENTED_EDGE('',*,*,#479563,.T.); +#479563 = EDGE_CURVE('',#479555,#479564,#479566,.T.); +#479564 = VERTEX_POINT('',#479565); +#479565 = CARTESIAN_POINT('',(153.355752,-117.334836,-7.5E-02)); +#479566 = LINE('',#479567,#479568); +#479567 = CARTESIAN_POINT('',(153.355752,-117.522931,-7.5E-02)); +#479568 = VECTOR('',#479569,1.); +#479569 = DIRECTION('',(0.,1.,0.)); +#479570 = ORIENTED_EDGE('',*,*,#479571,.T.); +#479571 = EDGE_CURVE('',#479564,#479572,#479574,.T.); +#479572 = VERTEX_POINT('',#479573); +#479573 = CARTESIAN_POINT('',(153.072419,-117.334836,-7.5E-02)); +#479574 = LINE('',#479575,#479576); +#479575 = CARTESIAN_POINT('',(153.355752,-117.334836,-7.5E-02)); +#479576 = VECTOR('',#479577,1.); +#479577 = DIRECTION('',(-1.,0.,0.)); +#479578 = ORIENTED_EDGE('',*,*,#479579,.T.); +#479579 = EDGE_CURVE('',#479572,#479580,#479582,.T.); +#479580 = VERTEX_POINT('',#479581); +#479581 = CARTESIAN_POINT('',(153.072419,-117.234836,-7.5E-02)); +#479582 = CIRCLE('',#479583,5.000000000002E-02); +#479583 = AXIS2_PLACEMENT_3D('',#479584,#479585,#479586); +#479584 = CARTESIAN_POINT('',(153.07241904771,-117.284836,-7.5E-02)); +#479585 = DIRECTION('',(0.,0.,-1.)); +#479586 = DIRECTION('',(-9.542367251921E-07,-1.,-0.)); +#479587 = ORIENTED_EDGE('',*,*,#479588,.T.); +#479588 = EDGE_CURVE('',#479580,#479589,#479591,.T.); +#479589 = VERTEX_POINT('',#479590); +#479590 = CARTESIAN_POINT('',(153.355752,-117.234836,-7.5E-02)); +#479591 = LINE('',#479592,#479593); +#479592 = CARTESIAN_POINT('',(153.072419,-117.234836,-7.5E-02)); +#479593 = VECTOR('',#479594,1.); +#479594 = DIRECTION('',(1.,0.,0.)); +#479595 = ORIENTED_EDGE('',*,*,#479596,.T.); +#479596 = EDGE_CURVE('',#479589,#479597,#479599,.T.); +#479597 = VERTEX_POINT('',#479598); +#479598 = CARTESIAN_POINT('',(153.355752,-117.141979,-7.5E-02)); +#479599 = LINE('',#479600,#479601); +#479600 = CARTESIAN_POINT('',(153.355752,-117.234836,-7.5E-02)); +#479601 = VECTOR('',#479602,1.); +#479602 = DIRECTION('',(0.,1.,0.)); +#479603 = ORIENTED_EDGE('',*,*,#479604,.T.); +#479604 = EDGE_CURVE('',#479597,#479447,#479605,.T.); +#479605 = LINE('',#479606,#479607); +#479606 = CARTESIAN_POINT('',(153.355752,-117.141979,-7.5E-02)); +#479607 = VECTOR('',#479608,1.); +#479608 = DIRECTION('',(0.195090852694,0.980785174845,0.)); +#479609 = PLANE('',#479610); +#479610 = AXIS2_PLACEMENT_3D('',#479611,#479612,#479613); +#479611 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479612 = DIRECTION('',(-0.,-0.,-1.)); +#479613 = DIRECTION('',(-1.,0.,0.)); +#479614 = SHELL_BASED_SURFACE_MODEL('',(#479615)); +#479615 = OPEN_SHELL('',(#479616)); +#479616 = ADVANCED_FACE('',(#479617),#479661,.T.); +#479617 = FACE_BOUND('',#479618,.T.); +#479618 = EDGE_LOOP('',(#479619,#479630,#479638,#479647,#479655)); +#479619 = ORIENTED_EDGE('',*,*,#479620,.T.); +#479620 = EDGE_CURVE('',#479621,#479623,#479625,.T.); +#479621 = VERTEX_POINT('',#479622); +#479622 = CARTESIAN_POINT('',(148.747067,-116.587039,-7.5E-02)); +#479623 = VERTEX_POINT('',#479624); +#479624 = CARTESIAN_POINT('',(148.8625,-116.61,-7.5E-02)); +#479625 = CIRCLE('',#479626,6.000007318649E-02); +#479626 = AXIS2_PLACEMENT_3D('',#479627,#479628,#479629); +#479627 = CARTESIAN_POINT('',(148.80249992681,-116.6099998233,-7.5E-02) + ); +#479628 = DIRECTION('',(0.,0.,-1.)); +#479629 = DIRECTION('',(-0.923880986636,0.382679921777,0.)); +#479630 = ORIENTED_EDGE('',*,*,#479631,.T.); +#479631 = EDGE_CURVE('',#479623,#479632,#479634,.T.); +#479632 = VERTEX_POINT('',#479633); +#479633 = CARTESIAN_POINT('',(148.8625,-117.39,-7.5E-02)); +#479634 = LINE('',#479635,#479636); +#479635 = CARTESIAN_POINT('',(148.8625,-116.61,-7.5E-02)); +#479636 = VECTOR('',#479637,1.); +#479637 = DIRECTION('',(0.,-1.,0.)); +#479638 = ORIENTED_EDGE('',*,*,#479639,.T.); +#479639 = EDGE_CURVE('',#479632,#479640,#479642,.T.); +#479640 = VERTEX_POINT('',#479641); +#479641 = CARTESIAN_POINT('',(148.7425,-117.39,-7.5E-02)); +#479642 = CIRCLE('',#479643,6.000000000043E-02); +#479643 = AXIS2_PLACEMENT_3D('',#479644,#479645,#479646); +#479644 = CARTESIAN_POINT('',(148.8025,-117.3900002255,-7.5E-02)); +#479645 = DIRECTION('',(0.,0.,-1.)); +#479646 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#479647 = ORIENTED_EDGE('',*,*,#479648,.T.); +#479648 = EDGE_CURVE('',#479640,#479649,#479651,.T.); +#479649 = VERTEX_POINT('',#479650); +#479650 = CARTESIAN_POINT('',(148.7425,-116.61,-7.5E-02)); +#479651 = LINE('',#479652,#479653); +#479652 = CARTESIAN_POINT('',(148.7425,-117.39,-7.5E-02)); +#479653 = VECTOR('',#479654,1.); +#479654 = DIRECTION('',(0.,1.,0.)); +#479655 = ORIENTED_EDGE('',*,*,#479656,.T.); +#479656 = EDGE_CURVE('',#479649,#479621,#479657,.T.); +#479657 = LINE('',#479658,#479659); +#479658 = CARTESIAN_POINT('',(148.7425,-116.61,-7.5E-02)); +#479659 = VECTOR('',#479660,1.); +#479660 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#479661 = PLANE('',#479662); +#479662 = AXIS2_PLACEMENT_3D('',#479663,#479664,#479665); +#479663 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479664 = DIRECTION('',(-0.,-0.,-1.)); +#479665 = DIRECTION('',(-1.,0.,0.)); +#479666 = SHELL_BASED_SURFACE_MODEL('',(#479667)); +#479667 = OPEN_SHELL('',(#479668)); +#479668 = ADVANCED_FACE('',(#479669),#479729,.T.); +#479669 = FACE_BOUND('',#479670,.T.); +#479670 = EDGE_LOOP('',(#479671,#479682,#479690,#479699,#479707,#479715, + #479723)); +#479671 = ORIENTED_EDGE('',*,*,#479672,.T.); +#479672 = EDGE_CURVE('',#479673,#479675,#479677,.T.); +#479673 = VERTEX_POINT('',#479674); +#479674 = CARTESIAN_POINT('',(147.973976,-117.08529,-7.5E-02)); +#479675 = VERTEX_POINT('',#479676); +#479676 = CARTESIAN_POINT('',(148.0225,-116.99,-7.5E-02)); +#479677 = CIRCLE('',#479678,5.999941814204E-02); +#479678 = AXIS2_PLACEMENT_3D('',#479679,#479680,#479681); +#479679 = CARTESIAN_POINT('',(148.02249924194,-117.0499994181,-7.5E-02) + ); +#479680 = DIRECTION('',(0.,0.,-1.)); +#479681 = DIRECTION('',(-0.80872854189,-0.588182068353,-0.)); +#479682 = ORIENTED_EDGE('',*,*,#479683,.T.); +#479683 = EDGE_CURVE('',#479675,#479684,#479686,.T.); +#479684 = VERTEX_POINT('',#479685); +#479685 = CARTESIAN_POINT('',(148.5025,-116.99,-7.5E-02)); +#479686 = LINE('',#479687,#479688); +#479687 = CARTESIAN_POINT('',(148.0225,-116.99,-7.5E-02)); +#479688 = VECTOR('',#479689,1.); +#479689 = DIRECTION('',(1.,0.,0.)); +#479690 = ORIENTED_EDGE('',*,*,#479691,.T.); +#479691 = EDGE_CURVE('',#479684,#479692,#479694,.T.); +#479692 = VERTEX_POINT('',#479693); +#479693 = CARTESIAN_POINT('',(148.551024,-117.08529,-7.5E-02)); +#479694 = CIRCLE('',#479695,6.000027696177E-02); +#479695 = AXIS2_PLACEMENT_3D('',#479696,#479697,#479698); +#479696 = CARTESIAN_POINT('',(148.50249907153,-117.0500002769,-7.5E-02) + ); +#479697 = DIRECTION('',(0.,0.,-1.)); +#479698 = DIRECTION('',(1.547440206489E-05,0.99999999988,0.)); +#479699 = ORIENTED_EDGE('',*,*,#479700,.T.); +#479700 = EDGE_CURVE('',#479692,#479701,#479703,.T.); +#479701 = VERTEX_POINT('',#479702); +#479702 = CARTESIAN_POINT('',(148.311024,-117.41529,-7.5E-02)); +#479703 = LINE('',#479704,#479705); +#479704 = CARTESIAN_POINT('',(148.551024,-117.08529,-7.5E-02)); +#479705 = VECTOR('',#479706,1.); +#479706 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#479707 = ORIENTED_EDGE('',*,*,#479708,.T.); +#479708 = EDGE_CURVE('',#479701,#479709,#479711,.T.); +#479709 = VERTEX_POINT('',#479710); +#479710 = CARTESIAN_POINT('',(148.271858,-117.439266,-7.5E-02)); +#479711 = LINE('',#479712,#479713); +#479712 = CARTESIAN_POINT('',(148.311024,-117.41529,-7.5E-02)); +#479713 = VECTOR('',#479714,1.); +#479714 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#479715 = ORIENTED_EDGE('',*,*,#479716,.T.); +#479716 = EDGE_CURVE('',#479709,#479717,#479719,.T.); +#479717 = VERTEX_POINT('',#479718); +#479718 = CARTESIAN_POINT('',(148.22721,-117.428524,-7.5E-02)); +#479719 = LINE('',#479720,#479721); +#479720 = CARTESIAN_POINT('',(148.271858,-117.439266,-7.5E-02)); +#479721 = VECTOR('',#479722,1.); +#479722 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#479723 = ORIENTED_EDGE('',*,*,#479724,.T.); +#479724 = EDGE_CURVE('',#479717,#479673,#479725,.T.); +#479725 = LINE('',#479726,#479727); +#479726 = CARTESIAN_POINT('',(148.22721,-117.428524,-7.5E-02)); +#479727 = VECTOR('',#479728,1.); +#479728 = DIRECTION('',(-0.593692353744,0.804692108267,0.)); +#479729 = PLANE('',#479730); +#479730 = AXIS2_PLACEMENT_3D('',#479731,#479732,#479733); +#479731 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479732 = DIRECTION('',(-0.,-0.,-1.)); +#479733 = DIRECTION('',(-1.,0.,0.)); +#479734 = SHELL_BASED_SURFACE_MODEL('',(#479735)); +#479735 = OPEN_SHELL('',(#479736)); +#479736 = ADVANCED_FACE('',(#479737),#479886,.T.); +#479737 = FACE_BOUND('',#479738,.T.); +#479738 = EDGE_LOOP('',(#479739,#479750,#479758,#479767,#479775,#479783, + #479791,#479799,#479807,#479815,#479823,#479832,#479840,#479848, + #479856,#479864,#479872,#479880)); +#479739 = ORIENTED_EDGE('',*,*,#479740,.T.); +#479740 = EDGE_CURVE('',#479741,#479743,#479745,.T.); +#479741 = VERTEX_POINT('',#479742); +#479742 = CARTESIAN_POINT('',(151.776674,-116.902459,-7.5E-02)); +#479743 = VERTEX_POINT('',#479744); +#479744 = CARTESIAN_POINT('',(151.795808,-116.806265,-7.5E-02)); +#479745 = CIRCLE('',#479746,4.999998452109E-02); +#479746 = AXIS2_PLACEMENT_3D('',#479747,#479748,#479749); +#479747 = CARTESIAN_POINT('',(151.79580803736,-116.8562649845,-7.5E-02) + ); +#479748 = DIRECTION('',(0.,0.,-1.)); +#479749 = DIRECTION('',(-0.382680865852,-0.923880595592,-0.)); +#479750 = ORIENTED_EDGE('',*,*,#479751,.T.); +#479751 = EDGE_CURVE('',#479743,#479752,#479754,.T.); +#479752 = VERTEX_POINT('',#479753); +#479753 = CARTESIAN_POINT('',(152.462475,-116.806265,-7.5E-02)); +#479754 = LINE('',#479755,#479756); +#479755 = CARTESIAN_POINT('',(151.795808,-116.806265,-7.5E-02)); +#479756 = VECTOR('',#479757,1.); +#479757 = DIRECTION('',(1.,0.,0.)); +#479758 = ORIENTED_EDGE('',*,*,#479759,.T.); +#479759 = EDGE_CURVE('',#479752,#479760,#479762,.T.); +#479760 = VERTEX_POINT('',#479761); +#479761 = CARTESIAN_POINT('',(152.462475,-116.906265,-7.5E-02)); +#479762 = CIRCLE('',#479763,5.000000000003E-02); +#479763 = AXIS2_PLACEMENT_3D('',#479764,#479765,#479766); +#479764 = CARTESIAN_POINT('',(152.46247495228,-116.856265,-7.5E-02)); +#479765 = DIRECTION('',(0.,0.,-1.)); +#479766 = DIRECTION('',(9.54237293626E-07,1.,0.)); +#479767 = ORIENTED_EDGE('',*,*,#479768,.T.); +#479768 = EDGE_CURVE('',#479760,#479769,#479771,.T.); +#479769 = VERTEX_POINT('',#479770); +#479770 = CARTESIAN_POINT('',(151.911757,-116.906265,-7.5E-02)); +#479771 = LINE('',#479772,#479773); +#479772 = CARTESIAN_POINT('',(152.462475,-116.906265,-7.5E-02)); +#479773 = VECTOR('',#479774,1.); +#479774 = DIRECTION('',(-1.,0.,0.)); +#479775 = ORIENTED_EDGE('',*,*,#479776,.T.); +#479776 = EDGE_CURVE('',#479769,#479777,#479779,.T.); +#479777 = VERTEX_POINT('',#479778); +#479778 = CARTESIAN_POINT('',(151.884519,-116.933501,-7.5E-02)); +#479779 = LINE('',#479780,#479781); +#479780 = CARTESIAN_POINT('',(151.911757,-116.906265,-7.5E-02)); +#479781 = VECTOR('',#479782,1.); +#479782 = DIRECTION('',(-0.707132741968,-0.707080819452,0.)); +#479783 = ORIENTED_EDGE('',*,*,#479784,.T.); +#479784 = EDGE_CURVE('',#479777,#479785,#479787,.T.); +#479785 = VERTEX_POINT('',#479786); +#479786 = CARTESIAN_POINT('',(151.845808,-117.010925,-7.5E-02)); +#479787 = LINE('',#479788,#479789); +#479788 = CARTESIAN_POINT('',(151.884519,-116.933501,-7.5E-02)); +#479789 = VECTOR('',#479790,1.); +#479790 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#479791 = ORIENTED_EDGE('',*,*,#479792,.T.); +#479792 = EDGE_CURVE('',#479785,#479793,#479795,.T.); +#479793 = VERTEX_POINT('',#479794); +#479794 = CARTESIAN_POINT('',(151.845808,-117.130176,-7.5E-02)); +#479795 = LINE('',#479796,#479797); +#479796 = CARTESIAN_POINT('',(151.845808,-117.010925,-7.5E-02)); +#479797 = VECTOR('',#479798,1.); +#479798 = DIRECTION('',(0.,-1.,0.)); +#479799 = ORIENTED_EDGE('',*,*,#479800,.T.); +#479800 = EDGE_CURVE('',#479793,#479801,#479803,.T.); +#479801 = VERTEX_POINT('',#479802); +#479802 = CARTESIAN_POINT('',(151.880694,-117.199949,-7.5E-02)); +#479803 = LINE('',#479804,#479805); +#479804 = CARTESIAN_POINT('',(151.845808,-117.130176,-7.5E-02)); +#479805 = VECTOR('',#479806,1.); +#479806 = DIRECTION('',(0.447208467837,-0.894429754813,0.)); +#479807 = ORIENTED_EDGE('',*,*,#479808,.T.); +#479808 = EDGE_CURVE('',#479801,#479809,#479811,.T.); +#479809 = VERTEX_POINT('',#479810); +#479810 = CARTESIAN_POINT('',(151.950469,-117.234836,-7.5E-02)); +#479811 = LINE('',#479812,#479813); +#479812 = CARTESIAN_POINT('',(151.880694,-117.199949,-7.5E-02)); +#479813 = VECTOR('',#479814,1.); +#479814 = DIRECTION('',(0.894429754739,-0.447208467984,0.)); +#479815 = ORIENTED_EDGE('',*,*,#479816,.T.); +#479816 = EDGE_CURVE('',#479809,#479817,#479819,.T.); +#479817 = VERTEX_POINT('',#479818); +#479818 = CARTESIAN_POINT('',(152.462475,-117.234836,-7.5E-02)); +#479819 = LINE('',#479820,#479821); +#479820 = CARTESIAN_POINT('',(151.950469,-117.234836,-7.5E-02)); +#479821 = VECTOR('',#479822,1.); +#479822 = DIRECTION('',(1.,0.,0.)); +#479823 = ORIENTED_EDGE('',*,*,#479824,.T.); +#479824 = EDGE_CURVE('',#479817,#479825,#479827,.T.); +#479825 = VERTEX_POINT('',#479826); +#479826 = CARTESIAN_POINT('',(152.462475,-117.334836,-7.5E-02)); +#479827 = CIRCLE('',#479828,5.000000000003E-02); +#479828 = AXIS2_PLACEMENT_3D('',#479829,#479830,#479831); +#479829 = CARTESIAN_POINT('',(152.46247495228,-117.284836,-7.5E-02)); +#479830 = DIRECTION('',(0.,0.,-1.)); +#479831 = DIRECTION('',(9.542372936263E-07,1.,0.)); +#479832 = ORIENTED_EDGE('',*,*,#479833,.T.); +#479833 = EDGE_CURVE('',#479825,#479834,#479836,.T.); +#479834 = VERTEX_POINT('',#479835); +#479835 = CARTESIAN_POINT('',(151.927392,-117.332593,-7.5E-02)); +#479836 = LINE('',#479837,#479838); +#479837 = CARTESIAN_POINT('',(152.462475,-117.334836,-7.5E-02)); +#479838 = VECTOR('',#479839,1.); +#479839 = DIRECTION('',(-0.999991214216,4.191836207615E-03,0.)); +#479840 = ORIENTED_EDGE('',*,*,#479841,.T.); +#479841 = EDGE_CURVE('',#479834,#479842,#479844,.T.); +#479842 = VERTEX_POINT('',#479843); +#479843 = CARTESIAN_POINT('',(151.810667,-117.274989,-7.5E-02)); +#479844 = LINE('',#479845,#479846); +#479845 = CARTESIAN_POINT('',(151.927392,-117.332593,-7.5E-02)); +#479846 = VECTOR('',#479847,1.); +#479847 = DIRECTION('',(-0.896745928688,0.44254574835,0.)); +#479848 = ORIENTED_EDGE('',*,*,#479849,.T.); +#479849 = EDGE_CURVE('',#479842,#479850,#479852,.T.); +#479850 = VERTEX_POINT('',#479851); +#479851 = CARTESIAN_POINT('',(151.798705,-117.259577,-7.5E-02)); +#479852 = LINE('',#479853,#479854); +#479853 = CARTESIAN_POINT('',(151.810667,-117.274989,-7.5E-02)); +#479854 = VECTOR('',#479855,1.); +#479855 = DIRECTION('',(-0.613138319011,0.789975570357,0.)); +#479856 = ORIENTED_EDGE('',*,*,#479857,.T.); +#479857 = EDGE_CURVE('',#479850,#479858,#479860,.T.); +#479858 = VERTEX_POINT('',#479859); +#479859 = CARTESIAN_POINT('',(151.74805,-117.153251,-7.5E-02)); +#479860 = LINE('',#479861,#479862); +#479861 = CARTESIAN_POINT('',(151.798705,-117.259577,-7.5E-02)); +#479862 = VECTOR('',#479863,1.); +#479863 = DIRECTION('',(-0.430096717347,0.902782816477,0.)); +#479864 = ORIENTED_EDGE('',*,*,#479865,.T.); +#479865 = EDGE_CURVE('',#479858,#479866,#479868,.T.); +#479866 = VERTEX_POINT('',#479867); +#479867 = CARTESIAN_POINT('',(151.74805,-116.987849,-7.5E-02)); +#479868 = LINE('',#479869,#479870); +#479869 = CARTESIAN_POINT('',(151.74805,-117.153251,-7.5E-02)); +#479870 = VECTOR('',#479871,1.); +#479871 = DIRECTION('',(0.,1.,0.)); +#479872 = ORIENTED_EDGE('',*,*,#479873,.T.); +#479873 = EDGE_CURVE('',#479866,#479874,#479876,.T.); +#479874 = VERTEX_POINT('',#479875); +#479875 = CARTESIAN_POINT('',(151.787191,-116.904551,-7.5E-02)); +#479876 = LINE('',#479877,#479878); +#479877 = CARTESIAN_POINT('',(151.74805,-116.987849,-7.5E-02)); +#479878 = VECTOR('',#479879,1.); +#479879 = DIRECTION('',(0.425280509061,0.905061593822,0.)); +#479880 = ORIENTED_EDGE('',*,*,#479881,.T.); +#479881 = EDGE_CURVE('',#479874,#479741,#479882,.T.); +#479882 = LINE('',#479883,#479884); +#479883 = CARTESIAN_POINT('',(151.787191,-116.904551,-7.5E-02)); +#479884 = VECTOR('',#479885,1.); +#479885 = DIRECTION('',(-0.980784591044,0.195093787627,0.)); +#479886 = PLANE('',#479887); +#479887 = AXIS2_PLACEMENT_3D('',#479888,#479889,#479890); +#479888 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479889 = DIRECTION('',(-0.,-0.,-1.)); +#479890 = DIRECTION('',(-1.,0.,0.)); +#479891 = SHELL_BASED_SURFACE_MODEL('',(#479892)); +#479892 = OPEN_SHELL('',(#479893)); +#479893 = ADVANCED_FACE('',(#479894),#479930,.T.); +#479894 = FACE_BOUND('',#479895,.T.); +#479895 = EDGE_LOOP('',(#479896,#479907,#479915,#479924)); +#479896 = ORIENTED_EDGE('',*,*,#479897,.T.); +#479897 = EDGE_CURVE('',#479898,#479900,#479902,.T.); +#479898 = VERTEX_POINT('',#479899); +#479899 = CARTESIAN_POINT('',(126.788748,-117.325,-7.5E-02)); +#479900 = VERTEX_POINT('',#479901); +#479901 = CARTESIAN_POINT('',(126.788748,-117.205,-7.5E-02)); +#479902 = CIRCLE('',#479903,6.000000000043E-02); +#479903 = AXIS2_PLACEMENT_3D('',#479904,#479905,#479906); +#479904 = CARTESIAN_POINT('',(126.78874777441,-117.265,-7.5E-02)); +#479905 = DIRECTION('',(0.,0.,-1.)); +#479906 = DIRECTION('',(3.759794016835E-06,-0.999999999993,0.)); +#479907 = ORIENTED_EDGE('',*,*,#479908,.T.); +#479908 = EDGE_CURVE('',#479900,#479909,#479911,.T.); +#479909 = VERTEX_POINT('',#479910); +#479910 = CARTESIAN_POINT('',(127.311252,-117.205,-7.5E-02)); +#479911 = LINE('',#479912,#479913); +#479912 = CARTESIAN_POINT('',(126.788748,-117.205,-7.5E-02)); +#479913 = VECTOR('',#479914,1.); +#479914 = DIRECTION('',(1.,0.,0.)); +#479915 = ORIENTED_EDGE('',*,*,#479916,.T.); +#479916 = EDGE_CURVE('',#479909,#479917,#479919,.T.); +#479917 = VERTEX_POINT('',#479918); +#479918 = CARTESIAN_POINT('',(127.311252,-117.325,-7.5E-02)); +#479919 = CIRCLE('',#479920,6.000000000043E-02); +#479920 = AXIS2_PLACEMENT_3D('',#479921,#479922,#479923); +#479921 = CARTESIAN_POINT('',(127.31125222558,-117.265,-7.5E-02)); +#479922 = DIRECTION('',(0.,0.,-1.)); +#479923 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#479924 = ORIENTED_EDGE('',*,*,#479925,.T.); +#479925 = EDGE_CURVE('',#479917,#479898,#479926,.T.); +#479926 = LINE('',#479927,#479928); +#479927 = CARTESIAN_POINT('',(127.311252,-117.325,-7.5E-02)); +#479928 = VECTOR('',#479929,1.); +#479929 = DIRECTION('',(-1.,0.,0.)); +#479930 = PLANE('',#479931); +#479931 = AXIS2_PLACEMENT_3D('',#479932,#479933,#479934); +#479932 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#479933 = DIRECTION('',(-0.,-0.,-1.)); +#479934 = DIRECTION('',(-1.,0.,0.)); +#479935 = SHELL_BASED_SURFACE_MODEL('',(#479936)); +#479936 = OPEN_SHELL('',(#479937)); +#479937 = ADVANCED_FACE('',(#479938),#480021,.T.); +#479938 = FACE_BOUND('',#479939,.T.); +#479939 = EDGE_LOOP('',(#479940,#479951,#479959,#479967,#479975,#479983, + #479991,#479999,#480007,#480015)); +#479940 = ORIENTED_EDGE('',*,*,#479941,.T.); +#479941 = EDGE_CURVE('',#479942,#479944,#479946,.T.); +#479942 = VERTEX_POINT('',#479943); +#479943 = CARTESIAN_POINT('',(153.084682,-116.725672,-7.5E-02)); +#479944 = VERTEX_POINT('',#479945); +#479945 = CARTESIAN_POINT('',(153.155393,-116.725672,-7.5E-02)); +#479946 = CIRCLE('',#479947,4.999898289287E-02); +#479947 = AXIS2_PLACEMENT_3D('',#479948,#479949,#479950); +#479948 = CARTESIAN_POINT('',(153.1200375,-116.7610257396,-7.5E-02)); +#479949 = DIRECTION('',(0.,0.,-1.)); +#479950 = DIRECTION('',(-0.707124384425,0.70708917751,0.)); +#479951 = ORIENTED_EDGE('',*,*,#479952,.T.); +#479952 = EDGE_CURVE('',#479944,#479953,#479955,.T.); +#479953 = VERTEX_POINT('',#479954); +#479954 = CARTESIAN_POINT('',(153.213851,-116.789512,-7.5E-02)); +#479955 = LINE('',#479956,#479957); +#479956 = CARTESIAN_POINT('',(153.155393,-116.725672,-7.5E-02)); +#479957 = VECTOR('',#479958,1.); +#479958 = DIRECTION('',(0.675335324481,-0.737510813146,0.)); +#479959 = ORIENTED_EDGE('',*,*,#479960,.T.); +#479960 = EDGE_CURVE('',#479953,#479961,#479963,.T.); +#479961 = VERTEX_POINT('',#479962); +#479962 = CARTESIAN_POINT('',(153.213851,-116.827781,-7.5E-02)); +#479963 = LINE('',#479964,#479965); +#479964 = CARTESIAN_POINT('',(153.213851,-116.789512,-7.5E-02)); +#479965 = VECTOR('',#479966,1.); +#479966 = DIRECTION('',(0.,-1.,0.)); +#479967 = ORIENTED_EDGE('',*,*,#479968,.T.); +#479968 = EDGE_CURVE('',#479961,#479969,#479971,.T.); +#479969 = VERTEX_POINT('',#479970); +#479970 = CARTESIAN_POINT('',(153.155393,-116.89162,-7.5E-02)); +#479971 = LINE('',#479972,#479973); +#479972 = CARTESIAN_POINT('',(153.213851,-116.827781,-7.5E-02)); +#479973 = VECTOR('',#479974,1.); +#479974 = DIRECTION('',(-0.675341078424,-0.737505544246,0.)); +#479975 = ORIENTED_EDGE('',*,*,#479976,.T.); +#479976 = EDGE_CURVE('',#479969,#479977,#479979,.T.); +#479977 = VERTEX_POINT('',#479978); +#479978 = CARTESIAN_POINT('',(153.139172,-116.902459,-7.5E-02)); +#479979 = LINE('',#479980,#479981); +#479980 = CARTESIAN_POINT('',(153.155393,-116.89162,-7.5E-02)); +#479981 = VECTOR('',#479982,1.); +#479982 = DIRECTION('',(-0.831458381235,-0.555587041132,0.)); +#479983 = ORIENTED_EDGE('',*,*,#479984,.T.); +#479984 = EDGE_CURVE('',#479977,#479985,#479987,.T.); +#479985 = VERTEX_POINT('',#479986); +#479986 = CARTESIAN_POINT('',(153.100903,-116.902459,-7.5E-02)); +#479987 = LINE('',#479988,#479989); +#479988 = CARTESIAN_POINT('',(153.139172,-116.902459,-7.5E-02)); +#479989 = VECTOR('',#479990,1.); +#479990 = DIRECTION('',(-1.,0.,0.)); +#479991 = ORIENTED_EDGE('',*,*,#479992,.T.); +#479992 = EDGE_CURVE('',#479985,#479993,#479995,.T.); +#479993 = VERTEX_POINT('',#479994); +#479994 = CARTESIAN_POINT('',(153.037064,-116.844001,-7.5E-02)); +#479995 = LINE('',#479996,#479997); +#479996 = CARTESIAN_POINT('',(153.100903,-116.902459,-7.5E-02)); +#479997 = VECTOR('',#479998,1.); +#479998 = DIRECTION('',(-0.737505544246,0.675341078424,0.)); +#479999 = ORIENTED_EDGE('',*,*,#480000,.T.); +#480000 = EDGE_CURVE('',#479993,#480001,#480003,.T.); +#480001 = VERTEX_POINT('',#480002); +#480002 = CARTESIAN_POINT('',(153.026225,-116.82778,-7.5E-02)); +#480003 = LINE('',#480004,#480005); +#480004 = CARTESIAN_POINT('',(153.037064,-116.844001,-7.5E-02)); +#480005 = VECTOR('',#480006,1.); +#480006 = DIRECTION('',(-0.555587041131,0.831458381236,0.)); +#480007 = ORIENTED_EDGE('',*,*,#480008,.T.); +#480008 = EDGE_CURVE('',#480001,#480009,#480011,.T.); +#480009 = VERTEX_POINT('',#480010); +#480010 = CARTESIAN_POINT('',(153.026226,-116.789511,-7.5E-02)); +#480011 = LINE('',#480012,#480013); +#480012 = CARTESIAN_POINT('',(153.026225,-116.82778,-7.5E-02)); +#480013 = VECTOR('',#480014,1.); +#480014 = DIRECTION('',(2.613081076417E-05,0.999999999659,0.)); +#480015 = ORIENTED_EDGE('',*,*,#480016,.T.); +#480016 = EDGE_CURVE('',#480009,#479942,#480017,.T.); +#480017 = LINE('',#480018,#480019); +#480018 = CARTESIAN_POINT('',(153.026226,-116.789511,-7.5E-02)); +#480019 = VECTOR('',#480020,1.); +#480020 = DIRECTION('',(0.675328510893,0.73751705226,0.)); +#480021 = PLANE('',#480022); +#480022 = AXIS2_PLACEMENT_3D('',#480023,#480024,#480025); +#480023 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480024 = DIRECTION('',(-0.,-0.,-1.)); +#480025 = DIRECTION('',(-1.,0.,0.)); +#480026 = SHELL_BASED_SURFACE_MODEL('',(#480027)); +#480027 = OPEN_SHELL('',(#480028)); +#480028 = ADVANCED_FACE('',(#480029),#480065,.T.); +#480029 = FACE_BOUND('',#480030,.T.); +#480030 = EDGE_LOOP('',(#480031,#480042,#480050,#480059)); +#480031 = ORIENTED_EDGE('',*,*,#480032,.T.); +#480032 = EDGE_CURVE('',#480033,#480035,#480037,.T.); +#480033 = VERTEX_POINT('',#480034); +#480034 = CARTESIAN_POINT('',(153.405752,-116.858646,-7.5E-02)); +#480035 = VERTEX_POINT('',#480036); +#480036 = CARTESIAN_POINT('',(153.405752,-116.758646,-7.5E-02)); +#480037 = CIRCLE('',#480038,5.000000000002E-02); +#480038 = AXIS2_PLACEMENT_3D('',#480039,#480040,#480041); +#480039 = CARTESIAN_POINT('',(153.40575204771,-116.808646,-7.5E-02)); +#480040 = DIRECTION('',(0.,0.,-1.)); +#480041 = DIRECTION('',(-9.542361567579E-07,-1.,-0.)); +#480042 = ORIENTED_EDGE('',*,*,#480043,.T.); +#480043 = EDGE_CURVE('',#480035,#480044,#480046,.T.); +#480044 = VERTEX_POINT('',#480045); +#480045 = CARTESIAN_POINT('',(154.072419,-116.758646,-7.5E-02)); +#480046 = LINE('',#480047,#480048); +#480047 = CARTESIAN_POINT('',(153.405752,-116.758646,-7.5E-02)); +#480048 = VECTOR('',#480049,1.); +#480049 = DIRECTION('',(1.,0.,0.)); +#480050 = ORIENTED_EDGE('',*,*,#480051,.T.); +#480051 = EDGE_CURVE('',#480044,#480052,#480054,.T.); +#480052 = VERTEX_POINT('',#480053); +#480053 = CARTESIAN_POINT('',(154.072419,-116.858646,-7.5E-02)); +#480054 = CIRCLE('',#480055,5.000000000002E-02); +#480055 = AXIS2_PLACEMENT_3D('',#480056,#480057,#480058); +#480056 = CARTESIAN_POINT('',(154.07241895228,-116.808646,-7.5E-02)); +#480057 = DIRECTION('',(0.,0.,-1.)); +#480058 = DIRECTION('',(9.542361567579E-07,1.,0.)); +#480059 = ORIENTED_EDGE('',*,*,#480060,.T.); +#480060 = EDGE_CURVE('',#480052,#480033,#480061,.T.); +#480061 = LINE('',#480062,#480063); +#480062 = CARTESIAN_POINT('',(154.072419,-116.858646,-7.5E-02)); +#480063 = VECTOR('',#480064,1.); +#480064 = DIRECTION('',(-1.,0.,0.)); +#480065 = PLANE('',#480066); +#480066 = AXIS2_PLACEMENT_3D('',#480067,#480068,#480069); +#480067 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480068 = DIRECTION('',(-0.,-0.,-1.)); +#480069 = DIRECTION('',(-1.,0.,0.)); +#480070 = SHELL_BASED_SURFACE_MODEL('',(#480071)); +#480071 = OPEN_SHELL('',(#480072)); +#480072 = ADVANCED_FACE('',(#480073),#480159,.T.); +#480073 = FACE_BOUND('',#480074,.T.); +#480074 = EDGE_LOOP('',(#480075,#480086,#480094,#480103,#480111,#480120, + #480128,#480136,#480144,#480153)); +#480075 = ORIENTED_EDGE('',*,*,#480076,.T.); +#480076 = EDGE_CURVE('',#480077,#480079,#480081,.T.); +#480077 = VERTEX_POINT('',#480078); +#480078 = CARTESIAN_POINT('',(148.7425,-115.44,-7.5E-02)); +#480079 = VERTEX_POINT('',#480080); +#480080 = CARTESIAN_POINT('',(148.8025,-115.38,-7.5E-02)); +#480081 = CIRCLE('',#480082,5.999932016256E-02); +#480082 = AXIS2_PLACEMENT_3D('',#480083,#480084,#480085); +#480083 = CARTESIAN_POINT('',(148.80249932015,-115.4399993201,-7.5E-02) + ); +#480084 = DIRECTION('',(0.,0.,-1.)); +#480085 = DIRECTION('',(-0.999999999936,-1.133081683198E-05,-0.)); +#480086 = ORIENTED_EDGE('',*,*,#480087,.T.); +#480087 = EDGE_CURVE('',#480079,#480088,#480090,.T.); +#480088 = VERTEX_POINT('',#480089); +#480089 = CARTESIAN_POINT('',(150.3225,-115.38,-7.5E-02)); +#480090 = LINE('',#480091,#480092); +#480091 = CARTESIAN_POINT('',(148.8025,-115.38,-7.5E-02)); +#480092 = VECTOR('',#480093,1.); +#480093 = DIRECTION('',(1.,0.,0.)); +#480094 = ORIENTED_EDGE('',*,*,#480095,.T.); +#480095 = EDGE_CURVE('',#480088,#480096,#480098,.T.); +#480096 = VERTEX_POINT('',#480097); +#480097 = CARTESIAN_POINT('',(150.3825,-115.44,-7.5E-02)); +#480098 = CIRCLE('',#480099,5.999932016262E-02); +#480099 = AXIS2_PLACEMENT_3D('',#480100,#480101,#480102); +#480100 = CARTESIAN_POINT('',(150.32250067984,-115.4399993201,-7.5E-02) + ); +#480101 = DIRECTION('',(0.,0.,-1.)); +#480102 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#480103 = ORIENTED_EDGE('',*,*,#480104,.T.); +#480104 = EDGE_CURVE('',#480096,#480105,#480107,.T.); +#480105 = VERTEX_POINT('',#480106); +#480106 = CARTESIAN_POINT('',(150.3825,-116.44,-7.5E-02)); +#480107 = LINE('',#480108,#480109); +#480108 = CARTESIAN_POINT('',(150.3825,-115.44,-7.5E-02)); +#480109 = VECTOR('',#480110,1.); +#480110 = DIRECTION('',(0.,-1.,0.)); +#480111 = ORIENTED_EDGE('',*,*,#480112,.T.); +#480112 = EDGE_CURVE('',#480105,#480113,#480115,.T.); +#480113 = VERTEX_POINT('',#480114); +#480114 = CARTESIAN_POINT('',(150.2625,-116.44,-7.5E-02)); +#480115 = CIRCLE('',#480116,6.000000000043E-02); +#480116 = AXIS2_PLACEMENT_3D('',#480117,#480118,#480119); +#480117 = CARTESIAN_POINT('',(150.3225,-116.4400002255,-7.5E-02)); +#480118 = DIRECTION('',(0.,0.,-1.)); +#480119 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#480120 = ORIENTED_EDGE('',*,*,#480121,.T.); +#480121 = EDGE_CURVE('',#480113,#480122,#480124,.T.); +#480122 = VERTEX_POINT('',#480123); +#480123 = CARTESIAN_POINT('',(150.2625,-115.5,-7.5E-02)); +#480124 = LINE('',#480125,#480126); +#480125 = CARTESIAN_POINT('',(150.2625,-116.44,-7.5E-02)); +#480126 = VECTOR('',#480127,1.); +#480127 = DIRECTION('',(0.,1.,0.)); +#480128 = ORIENTED_EDGE('',*,*,#480129,.T.); +#480129 = EDGE_CURVE('',#480122,#480130,#480132,.T.); +#480130 = VERTEX_POINT('',#480131); +#480131 = CARTESIAN_POINT('',(148.860511,-115.5,-7.5E-02)); +#480132 = LINE('',#480133,#480134); +#480133 = CARTESIAN_POINT('',(150.2625,-115.5,-7.5E-02)); +#480134 = VECTOR('',#480135,1.); +#480135 = DIRECTION('',(-1.,0.,0.)); +#480136 = ORIENTED_EDGE('',*,*,#480137,.T.); +#480137 = EDGE_CURVE('',#480130,#480138,#480140,.T.); +#480138 = VERTEX_POINT('',#480139); +#480139 = CARTESIAN_POINT('',(148.857933,-115.512961,-7.5E-02)); +#480140 = LINE('',#480141,#480142); +#480141 = CARTESIAN_POINT('',(148.860511,-115.5,-7.5E-02)); +#480142 = VECTOR('',#480143,1.); +#480143 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#480144 = ORIENTED_EDGE('',*,*,#480145,.T.); +#480145 = EDGE_CURVE('',#480138,#480146,#480148,.T.); +#480146 = VERTEX_POINT('',#480147); +#480147 = CARTESIAN_POINT('',(148.7425,-115.49,-7.5E-02)); +#480148 = CIRCLE('',#480149,6.000007318647E-02); +#480149 = AXIS2_PLACEMENT_3D('',#480150,#480151,#480152); +#480150 = CARTESIAN_POINT('',(148.80250007318,-115.4900001766,-7.5E-02) + ); +#480151 = DIRECTION('',(-0.,0.,-1.)); +#480152 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#480153 = ORIENTED_EDGE('',*,*,#480154,.T.); +#480154 = EDGE_CURVE('',#480146,#480077,#480155,.T.); +#480155 = LINE('',#480156,#480157); +#480156 = CARTESIAN_POINT('',(148.7425,-115.49,-7.5E-02)); +#480157 = VECTOR('',#480158,1.); +#480158 = DIRECTION('',(0.,1.,0.)); +#480159 = PLANE('',#480160); +#480160 = AXIS2_PLACEMENT_3D('',#480161,#480162,#480163); +#480161 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480162 = DIRECTION('',(-0.,-0.,-1.)); +#480163 = DIRECTION('',(-1.,0.,0.)); +#480164 = SHELL_BASED_SURFACE_MODEL('',(#480165)); +#480165 = OPEN_SHELL('',(#480166)); +#480166 = ADVANCED_FACE('',(#480167),#480477,.T.); +#480167 = FACE_BOUND('',#480168,.T.); +#480168 = EDGE_LOOP('',(#480169,#480180,#480188,#480196,#480204,#480212, + #480220,#480228,#480236,#480244,#480252,#480260,#480268,#480276, + #480285,#480293,#480301,#480309,#480317,#480326,#480334,#480342, + #480350,#480358,#480366,#480374,#480382,#480390,#480398,#480406, + #480414,#480422,#480430,#480439,#480447,#480455,#480463,#480471)); +#480169 = ORIENTED_EDGE('',*,*,#480170,.T.); +#480170 = EDGE_CURVE('',#480171,#480173,#480175,.T.); +#480171 = VERTEX_POINT('',#480172); +#480172 = CARTESIAN_POINT('',(152.364982,-115.852721,-7.5E-02)); +#480173 = VERTEX_POINT('',#480174); +#480174 = CARTESIAN_POINT('',(152.46229,-115.840454,-7.5E-02)); +#480175 = CIRCLE('',#480176,4.999973388518E-02); +#480176 = AXIS2_PLACEMENT_3D('',#480177,#480178,#480179); +#480177 = CARTESIAN_POINT('',(152.41485597754,-115.8562649741,-7.5E-02) + ); +#480178 = DIRECTION('',(0.,0.,-1.)); +#480179 = DIRECTION('',(-0.997484859799,7.087985942323E-02,0.)); +#480180 = ORIENTED_EDGE('',*,*,#480181,.T.); +#480181 = EDGE_CURVE('',#480173,#480182,#480184,.T.); +#480182 = VERTEX_POINT('',#480183); +#480183 = CARTESIAN_POINT('',(152.512475,-115.999122,-7.5E-02)); +#480184 = LINE('',#480185,#480186); +#480185 = CARTESIAN_POINT('',(152.46229,-115.840454,-7.5E-02)); +#480186 = VECTOR('',#480187,1.); +#480187 = DIRECTION('',(0.301564730907,-0.953445705362,0.)); +#480188 = ORIENTED_EDGE('',*,*,#480189,.T.); +#480189 = EDGE_CURVE('',#480182,#480190,#480192,.T.); +#480190 = VERTEX_POINT('',#480191); +#480191 = CARTESIAN_POINT('',(152.510232,-116.248489,-7.5E-02)); +#480192 = LINE('',#480193,#480194); +#480193 = CARTESIAN_POINT('',(152.512475,-115.999122,-7.5E-02)); +#480194 = VECTOR('',#480195,1.); +#480195 = DIRECTION('',(-8.994410926263E-03,-0.999959549468,0.)); +#480196 = ORIENTED_EDGE('',*,*,#480197,.T.); +#480197 = EDGE_CURVE('',#480190,#480198,#480200,.T.); +#480198 = VERTEX_POINT('',#480199); +#480199 = CARTESIAN_POINT('',(152.450211,-116.367811,-7.5E-02)); +#480200 = LINE('',#480201,#480202); +#480201 = CARTESIAN_POINT('',(152.510232,-116.248489,-7.5E-02)); +#480202 = VECTOR('',#480203,1.); +#480203 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#480204 = ORIENTED_EDGE('',*,*,#480205,.T.); +#480205 = EDGE_CURVE('',#480198,#480206,#480208,.T.); +#480206 = VERTEX_POINT('',#480207); +#480207 = CARTESIAN_POINT('',(152.389596,-116.424796,-7.5E-02)); +#480208 = LINE('',#480209,#480210); +#480209 = CARTESIAN_POINT('',(152.450211,-116.367811,-7.5E-02)); +#480210 = VECTOR('',#480211,1.); +#480211 = DIRECTION('',(-0.728586278171,-0.684954038795,0.)); +#480212 = ORIENTED_EDGE('',*,*,#480213,.T.); +#480213 = EDGE_CURVE('',#480206,#480214,#480216,.T.); +#480214 = VERTEX_POINT('',#480215); +#480215 = CARTESIAN_POINT('',(152.28327,-116.47545,-7.5E-02)); +#480216 = LINE('',#480217,#480218); +#480217 = CARTESIAN_POINT('',(152.389596,-116.424796,-7.5E-02)); +#480218 = VECTOR('',#480219,1.); +#480219 = DIRECTION('',(-0.902786113268,-0.430089797241,0.)); +#480220 = ORIENTED_EDGE('',*,*,#480221,.T.); +#480221 = EDGE_CURVE('',#480214,#480222,#480224,.T.); +#480222 = VERTEX_POINT('',#480223); +#480223 = CARTESIAN_POINT('',(152.165487,-116.47545,-7.5E-02)); +#480224 = LINE('',#480225,#480226); +#480225 = CARTESIAN_POINT('',(152.28327,-116.47545,-7.5E-02)); +#480226 = VECTOR('',#480227,1.); +#480227 = DIRECTION('',(-1.,0.,0.)); +#480228 = ORIENTED_EDGE('',*,*,#480229,.T.); +#480229 = EDGE_CURVE('',#480222,#480230,#480232,.T.); +#480230 = VERTEX_POINT('',#480231); +#480231 = CARTESIAN_POINT('',(152.046166,-116.415429,-7.5E-02)); +#480232 = LINE('',#480233,#480234); +#480233 = CARTESIAN_POINT('',(152.165487,-116.47545,-7.5E-02)); +#480234 = VECTOR('',#480235,1.); +#480235 = DIRECTION('',(-0.893344973043,0.449371515718,0.)); +#480236 = ORIENTED_EDGE('',*,*,#480237,.T.); +#480237 = EDGE_CURVE('',#480230,#480238,#480240,.T.); +#480238 = VERTEX_POINT('',#480239); +#480239 = CARTESIAN_POINT('',(151.989181,-116.354815,-7.5E-02)); +#480240 = LINE('',#480241,#480242); +#480241 = CARTESIAN_POINT('',(152.046166,-116.415429,-7.5E-02)); +#480242 = VECTOR('',#480243,1.); +#480243 = DIRECTION('',(-0.684960037333,0.728580638816,0.)); +#480244 = ORIENTED_EDGE('',*,*,#480245,.T.); +#480245 = EDGE_CURVE('',#480238,#480246,#480248,.T.); +#480246 = VERTEX_POINT('',#480247); +#480247 = CARTESIAN_POINT('',(151.937777,-116.249344,-7.5E-02)); +#480248 = LINE('',#480249,#480250); +#480249 = CARTESIAN_POINT('',(151.989181,-116.354815,-7.5E-02)); +#480250 = VECTOR('',#480251,1.); +#480251 = DIRECTION('',(-0.438111947913,0.898920419779,0.)); +#480252 = ORIENTED_EDGE('',*,*,#480253,.T.); +#480253 = EDGE_CURVE('',#480246,#480254,#480256,.T.); +#480254 = VERTEX_POINT('',#480255); +#480255 = CARTESIAN_POINT('',(151.891489,-116.064193,-7.5E-02)); +#480256 = LINE('',#480257,#480258); +#480257 = CARTESIAN_POINT('',(151.937777,-116.249344,-7.5E-02)); +#480258 = VECTOR('',#480259,1.); +#480259 = DIRECTION('',(-0.242536857915,0.970142191925,0.)); +#480260 = ORIENTED_EDGE('',*,*,#480261,.T.); +#480261 = EDGE_CURVE('',#480254,#480262,#480264,.T.); +#480262 = VERTEX_POINT('',#480263); +#480263 = CARTESIAN_POINT('',(151.849953,-115.981121,-7.5E-02)); +#480264 = LINE('',#480265,#480266); +#480265 = CARTESIAN_POINT('',(151.891489,-116.064193,-7.5E-02)); +#480266 = VECTOR('',#480267,1.); +#480267 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#480268 = ORIENTED_EDGE('',*,*,#480269,.T.); +#480269 = EDGE_CURVE('',#480262,#480270,#480272,.T.); +#480270 = VERTEX_POINT('',#480271); +#480271 = CARTESIAN_POINT('',(151.813809,-115.944976,-7.5E-02)); +#480272 = LINE('',#480273,#480274); +#480273 = CARTESIAN_POINT('',(151.849953,-115.981121,-7.5E-02)); +#480274 = VECTOR('',#480275,1.); +#480275 = DIRECTION('',(-0.707096999454,0.707116562784,0.)); +#480276 = ORIENTED_EDGE('',*,*,#480277,.T.); +#480277 = EDGE_CURVE('',#480270,#480278,#480280,.T.); +#480278 = VERTEX_POINT('',#480279); +#480279 = CARTESIAN_POINT('',(151.587331,-115.944976,-7.5E-02)); +#480280 = CIRCLE('',#480281,0.172178775774); +#480281 = AXIS2_PLACEMENT_3D('',#480282,#480283,#480284); +#480282 = CARTESIAN_POINT('',(151.70057,-116.0746774252,-7.5E-02)); +#480283 = DIRECTION('',(0.,0.,1.)); +#480284 = DIRECTION('',(0.657682687606,0.753295083233,-0.)); +#480285 = ORIENTED_EDGE('',*,*,#480286,.T.); +#480286 = EDGE_CURVE('',#480278,#480287,#480289,.T.); +#480287 = VERTEX_POINT('',#480288); +#480288 = CARTESIAN_POINT('',(151.551186,-115.98112,-7.5E-02)); +#480289 = LINE('',#480290,#480291); +#480290 = CARTESIAN_POINT('',(151.587331,-115.944976,-7.5E-02)); +#480291 = VECTOR('',#480292,1.); +#480292 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#480293 = ORIENTED_EDGE('',*,*,#480294,.T.); +#480294 = EDGE_CURVE('',#480287,#480295,#480297,.T.); +#480295 = VERTEX_POINT('',#480296); +#480296 = CARTESIAN_POINT('',(151.512475,-116.058544,-7.5E-02)); +#480297 = LINE('',#480298,#480299); +#480298 = CARTESIAN_POINT('',(151.551186,-115.98112,-7.5E-02)); +#480299 = VECTOR('',#480300,1.); +#480300 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#480301 = ORIENTED_EDGE('',*,*,#480302,.T.); +#480302 = EDGE_CURVE('',#480295,#480303,#480305,.T.); +#480303 = VERTEX_POINT('',#480304); +#480304 = CARTESIAN_POINT('',(151.512475,-116.276722,-7.5E-02)); +#480305 = LINE('',#480306,#480307); +#480306 = CARTESIAN_POINT('',(151.512475,-116.058544,-7.5E-02)); +#480307 = VECTOR('',#480308,1.); +#480308 = DIRECTION('',(0.,-1.,0.)); +#480309 = ORIENTED_EDGE('',*,*,#480310,.T.); +#480310 = EDGE_CURVE('',#480303,#480311,#480313,.T.); +#480311 = VERTEX_POINT('',#480312); +#480312 = CARTESIAN_POINT('',(151.557528,-116.411881,-7.5E-02)); +#480313 = LINE('',#480314,#480315); +#480314 = CARTESIAN_POINT('',(151.512475,-116.276722,-7.5E-02)); +#480315 = VECTOR('',#480316,1.); +#480316 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#480317 = ORIENTED_EDGE('',*,*,#480318,.T.); +#480318 = EDGE_CURVE('',#480311,#480319,#480321,.T.); +#480319 = VERTEX_POINT('',#480320); +#480320 = CARTESIAN_POINT('',(151.46266,-116.443504,-7.5E-02)); +#480321 = CIRCLE('',#480322,4.999987888244E-02); +#480322 = AXIS2_PLACEMENT_3D('',#480323,#480324,#480325); +#480323 = CARTESIAN_POINT('',(151.51009397079,-116.4276924123,-7.5E-02) + ); +#480324 = DIRECTION('',(0.,0.,-1.)); +#480325 = DIRECTION('',(0.948682882121,0.316229013802,0.)); +#480326 = ORIENTED_EDGE('',*,*,#480327,.T.); +#480327 = EDGE_CURVE('',#480319,#480328,#480330,.T.); +#480328 = VERTEX_POINT('',#480329); +#480329 = CARTESIAN_POINT('',(151.412475,-116.284836,-7.5E-02)); +#480330 = LINE('',#480331,#480332); +#480331 = CARTESIAN_POINT('',(151.46266,-116.443504,-7.5E-02)); +#480332 = VECTOR('',#480333,1.); +#480333 = DIRECTION('',(-0.301564730907,0.953445705362,0.)); +#480334 = ORIENTED_EDGE('',*,*,#480335,.T.); +#480335 = EDGE_CURVE('',#480328,#480336,#480338,.T.); +#480336 = VERTEX_POINT('',#480337); +#480337 = CARTESIAN_POINT('',(151.414717,-116.035468,-7.5E-02)); +#480338 = LINE('',#480339,#480340); +#480339 = CARTESIAN_POINT('',(151.412475,-116.284836,-7.5E-02)); +#480340 = VECTOR('',#480341,1.); +#480341 = DIRECTION('',(8.990365209133E-03,0.99995958585,0.)); +#480342 = ORIENTED_EDGE('',*,*,#480343,.T.); +#480343 = EDGE_CURVE('',#480336,#480344,#480346,.T.); +#480344 = VERTEX_POINT('',#480345); +#480345 = CARTESIAN_POINT('',(151.474739,-115.916148,-7.5E-02)); +#480346 = LINE('',#480347,#480348); +#480347 = CARTESIAN_POINT('',(151.414717,-116.035468,-7.5E-02)); +#480348 = VECTOR('',#480349,1.); +#480349 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#480350 = ORIENTED_EDGE('',*,*,#480351,.T.); +#480351 = EDGE_CURVE('',#480344,#480352,#480354,.T.); +#480352 = VERTEX_POINT('',#480353); +#480353 = CARTESIAN_POINT('',(151.535352,-115.859163,-7.5E-02)); +#480354 = LINE('',#480355,#480356); +#480355 = CARTESIAN_POINT('',(151.474739,-115.916148,-7.5E-02)); +#480356 = VECTOR('',#480357,1.); +#480357 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#480358 = ORIENTED_EDGE('',*,*,#480359,.T.); +#480359 = EDGE_CURVE('',#480352,#480360,#480362,.T.); +#480360 = VERTEX_POINT('',#480361); +#480361 = CARTESIAN_POINT('',(151.641678,-115.808507,-7.5E-02)); +#480362 = LINE('',#480363,#480364); +#480363 = CARTESIAN_POINT('',(151.535352,-115.859163,-7.5E-02)); +#480364 = VECTOR('',#480365,1.); +#480365 = DIRECTION('',(0.902779519658,0.430103637377,0.)); +#480366 = ORIENTED_EDGE('',*,*,#480367,.T.); +#480367 = EDGE_CURVE('',#480360,#480368,#480370,.T.); +#480368 = VERTEX_POINT('',#480369); +#480369 = CARTESIAN_POINT('',(151.750645,-115.806753,-7.5E-02)); +#480370 = LINE('',#480371,#480372); +#480371 = CARTESIAN_POINT('',(151.641678,-115.808507,-7.5E-02)); +#480372 = VECTOR('',#480373,1.); +#480373 = DIRECTION('',(0.99987047464,1.609453148681E-02,0.)); +#480374 = ORIENTED_EDGE('',*,*,#480375,.T.); +#480375 = EDGE_CURVE('',#480368,#480376,#480378,.T.); +#480376 = VERTEX_POINT('',#480377); +#480377 = CARTESIAN_POINT('',(151.77055,-115.811544,-7.5E-02)); +#480378 = LINE('',#480379,#480380); +#480379 = CARTESIAN_POINT('',(151.750645,-115.806753,-7.5E-02)); +#480380 = VECTOR('',#480381,1.); +#480381 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#480382 = ORIENTED_EDGE('',*,*,#480383,.T.); +#480383 = EDGE_CURVE('',#480376,#480384,#480386,.T.); +#480384 = VERTEX_POINT('',#480385); +#480385 = CARTESIAN_POINT('',(151.878782,-115.868529,-7.5E-02)); +#480386 = LINE('',#480387,#480388); +#480387 = CARTESIAN_POINT('',(151.77055,-115.811544,-7.5E-02)); +#480388 = VECTOR('',#480389,1.); +#480389 = DIRECTION('',(0.884848162196,-0.465879522902,0.)); +#480390 = ORIENTED_EDGE('',*,*,#480391,.T.); +#480391 = EDGE_CURVE('',#480384,#480392,#480394,.T.); +#480392 = VERTEX_POINT('',#480393); +#480393 = CARTESIAN_POINT('',(151.935767,-115.929142,-7.5E-02)); +#480394 = LINE('',#480395,#480396); +#480395 = CARTESIAN_POINT('',(151.878782,-115.868529,-7.5E-02)); +#480396 = VECTOR('',#480397,1.); +#480397 = DIRECTION('',(0.68496603593,-0.728574999312,0.)); +#480398 = ORIENTED_EDGE('',*,*,#480399,.T.); +#480399 = EDGE_CURVE('',#480392,#480400,#480402,.T.); +#480400 = VERTEX_POINT('',#480401); +#480401 = CARTESIAN_POINT('',(151.987172,-116.034614,-7.5E-02)); +#480402 = LINE('',#480403,#480404); +#480403 = CARTESIAN_POINT('',(151.935767,-115.929142,-7.5E-02)); +#480404 = VECTOR('',#480405,1.); +#480405 = DIRECTION('',(0.438115478318,-0.898918699137,0.)); +#480406 = ORIENTED_EDGE('',*,*,#480407,.T.); +#480407 = EDGE_CURVE('',#480400,#480408,#480410,.T.); +#480408 = VERTEX_POINT('',#480409); +#480409 = CARTESIAN_POINT('',(152.03346,-116.219766,-7.5E-02)); +#480410 = LINE('',#480411,#480412); +#480411 = CARTESIAN_POINT('',(151.987172,-116.034614,-7.5E-02)); +#480412 = VECTOR('',#480413,1.); +#480413 = DIRECTION('',(0.242535625036,-0.970142500145,0.)); +#480414 = ORIENTED_EDGE('',*,*,#480415,.T.); +#480415 = EDGE_CURVE('',#480408,#480416,#480418,.T.); +#480416 = VERTEX_POINT('',#480417); +#480417 = CARTESIAN_POINT('',(152.074995,-116.302837,-7.5E-02)); +#480418 = LINE('',#480419,#480420); +#480419 = CARTESIAN_POINT('',(152.03346,-116.219766,-7.5E-02)); +#480420 = VECTOR('',#480421,1.); +#480421 = DIRECTION('',(0.447209288676,-0.894429344399,0.)); +#480422 = ORIENTED_EDGE('',*,*,#480423,.T.); +#480423 = EDGE_CURVE('',#480416,#480424,#480426,.T.); +#480424 = VERTEX_POINT('',#480425); +#480425 = CARTESIAN_POINT('',(152.11114,-116.338981,-7.5E-02)); +#480426 = LINE('',#480427,#480428); +#480427 = CARTESIAN_POINT('',(152.074995,-116.302837,-7.5E-02)); +#480428 = VECTOR('',#480429,1.); +#480429 = DIRECTION('',(0.707116562784,-0.707096999454,0.)); +#480430 = ORIENTED_EDGE('',*,*,#480431,.T.); +#480431 = EDGE_CURVE('',#480424,#480432,#480434,.T.); +#480432 = VERTEX_POINT('',#480433); +#480433 = CARTESIAN_POINT('',(152.337617,-116.338981,-7.5E-02)); +#480434 = CIRCLE('',#480435,0.172175113449); +#480435 = AXIS2_PLACEMENT_3D('',#480436,#480437,#480438); +#480436 = CARTESIAN_POINT('',(152.2243785,-116.209284,-7.5E-02)); +#480437 = DIRECTION('',(0.,0.,1.)); +#480438 = DIRECTION('',(-0.65769377311,-0.75328540462,0.)); +#480439 = ORIENTED_EDGE('',*,*,#480440,.T.); +#480440 = EDGE_CURVE('',#480432,#480441,#480443,.T.); +#480441 = VERTEX_POINT('',#480442); +#480442 = CARTESIAN_POINT('',(152.373764,-116.302835,-7.5E-02)); +#480443 = LINE('',#480444,#480445); +#480444 = CARTESIAN_POINT('',(152.337617,-116.338981,-7.5E-02)); +#480445 = VECTOR('',#480446,1.); +#480446 = DIRECTION('',(0.707116562243,0.707096999995,0.)); +#480447 = ORIENTED_EDGE('',*,*,#480448,.T.); +#480448 = EDGE_CURVE('',#480441,#480449,#480451,.T.); +#480449 = VERTEX_POINT('',#480450); +#480450 = CARTESIAN_POINT('',(152.412475,-116.225413,-7.5E-02)); +#480451 = LINE('',#480452,#480453); +#480452 = CARTESIAN_POINT('',(152.373764,-116.302835,-7.5E-02)); +#480453 = VECTOR('',#480454,1.); +#480454 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#480455 = ORIENTED_EDGE('',*,*,#480456,.T.); +#480456 = EDGE_CURVE('',#480449,#480457,#480459,.T.); +#480457 = VERTEX_POINT('',#480458); +#480458 = CARTESIAN_POINT('',(152.412475,-116.007235,-7.5E-02)); +#480459 = LINE('',#480460,#480461); +#480460 = CARTESIAN_POINT('',(152.412475,-116.225413,-7.5E-02)); +#480461 = VECTOR('',#480462,1.); +#480462 = DIRECTION('',(0.,1.,0.)); +#480463 = ORIENTED_EDGE('',*,*,#480464,.T.); +#480464 = EDGE_CURVE('',#480457,#480465,#480467,.T.); +#480465 = VERTEX_POINT('',#480466); +#480466 = CARTESIAN_POINT('',(152.367422,-115.872076,-7.5E-02)); +#480467 = LINE('',#480468,#480469); +#480468 = CARTESIAN_POINT('',(152.412475,-116.007235,-7.5E-02)); +#480469 = VECTOR('',#480470,1.); +#480470 = DIRECTION('',(-0.316227766017,0.948683298051,0.)); +#480471 = ORIENTED_EDGE('',*,*,#480472,.T.); +#480472 = EDGE_CURVE('',#480465,#480171,#480473,.T.); +#480473 = LINE('',#480474,#480475); +#480474 = CARTESIAN_POINT('',(152.367422,-115.872076,-7.5E-02)); +#480475 = VECTOR('',#480476,1.); +#480476 = DIRECTION('',(-0.125075649038,0.992147207836,0.)); +#480477 = PLANE('',#480478); +#480478 = AXIS2_PLACEMENT_3D('',#480479,#480480,#480481); +#480479 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480480 = DIRECTION('',(-0.,-0.,-1.)); +#480481 = DIRECTION('',(-1.,0.,0.)); +#480482 = SHELL_BASED_SURFACE_MODEL('',(#480483)); +#480483 = OPEN_SHELL('',(#480484)); +#480484 = ADVANCED_FACE('',(#480485,#480690),#480773,.T.); +#480485 = FACE_BOUND('',#480486,.T.); +#480486 = EDGE_LOOP('',(#480487,#480497,#480505,#480513,#480521,#480529, + #480537,#480545,#480553,#480561,#480570,#480578,#480586,#480595, + #480603,#480611,#480619,#480627,#480635,#480643,#480652,#480660, + #480668,#480676,#480684)); +#480487 = ORIENTED_EDGE('',*,*,#480488,.T.); +#480488 = EDGE_CURVE('',#480489,#480491,#480493,.T.); +#480489 = VERTEX_POINT('',#480490); +#480490 = CARTESIAN_POINT('',(153.478629,-115.859163,-7.5E-02)); +#480491 = VERTEX_POINT('',#480492); +#480492 = CARTESIAN_POINT('',(153.584955,-115.808507,-7.5E-02)); +#480493 = LINE('',#480494,#480495); +#480494 = CARTESIAN_POINT('',(153.478629,-115.859163,-7.5E-02)); +#480495 = VECTOR('',#480496,1.); +#480496 = DIRECTION('',(0.902779519658,0.430103637378,0.)); +#480497 = ORIENTED_EDGE('',*,*,#480498,.T.); +#480498 = EDGE_CURVE('',#480491,#480499,#480501,.T.); +#480499 = VERTEX_POINT('',#480500); +#480500 = CARTESIAN_POINT('',(153.884398,-115.806753,-7.5E-02)); +#480501 = LINE('',#480502,#480503); +#480502 = CARTESIAN_POINT('',(153.584955,-115.808507,-7.5E-02)); +#480503 = VECTOR('',#480504,1.); +#480504 = DIRECTION('',(0.999982845041,5.857441684086E-03,0.)); +#480505 = ORIENTED_EDGE('',*,*,#480506,.T.); +#480506 = EDGE_CURVE('',#480499,#480507,#480509,.T.); +#480507 = VERTEX_POINT('',#480508); +#480508 = CARTESIAN_POINT('',(153.904303,-115.811544,-7.5E-02)); +#480509 = LINE('',#480510,#480511); +#480510 = CARTESIAN_POINT('',(153.884398,-115.806753,-7.5E-02)); +#480511 = VECTOR('',#480512,1.); +#480512 = DIRECTION('',(0.972234133225,-0.234010235231,0.)); +#480513 = ORIENTED_EDGE('',*,*,#480514,.T.); +#480514 = EDGE_CURVE('',#480507,#480515,#480517,.T.); +#480515 = VERTEX_POINT('',#480516); +#480516 = CARTESIAN_POINT('',(154.012535,-115.868528,-7.5E-02)); +#480517 = LINE('',#480518,#480519); +#480518 = CARTESIAN_POINT('',(153.904303,-115.811544,-7.5E-02)); +#480519 = VECTOR('',#480520,1.); +#480520 = DIRECTION('',(0.884851532383,-0.465873121825,0.)); +#480521 = ORIENTED_EDGE('',*,*,#480522,.T.); +#480522 = EDGE_CURVE('',#480515,#480523,#480525,.T.); +#480523 = VERTEX_POINT('',#480524); +#480524 = CARTESIAN_POINT('',(154.069521,-115.929142,-7.5E-02)); +#480525 = LINE('',#480526,#480527); +#480526 = CARTESIAN_POINT('',(154.012535,-115.868528,-7.5E-02)); +#480527 = VECTOR('',#480528,1.); +#480528 = DIRECTION('',(0.684966417831,-0.72857464027,0.)); +#480529 = ORIENTED_EDGE('',*,*,#480530,.T.); +#480530 = EDGE_CURVE('',#480523,#480531,#480533,.T.); +#480531 = VERTEX_POINT('',#480532); +#480532 = CARTESIAN_POINT('',(154.120176,-116.035468,-7.5E-02)); +#480533 = LINE('',#480534,#480535); +#480534 = CARTESIAN_POINT('',(154.069521,-115.929142,-7.5E-02)); +#480535 = VECTOR('',#480536,1.); +#480536 = DIRECTION('',(0.430096717347,-0.902782816478,0.)); +#480537 = ORIENTED_EDGE('',*,*,#480538,.T.); +#480538 = EDGE_CURVE('',#480531,#480539,#480541,.T.); +#480539 = VERTEX_POINT('',#480540); +#480540 = CARTESIAN_POINT('',(154.120176,-116.248489,-7.5E-02)); +#480541 = LINE('',#480542,#480543); +#480542 = CARTESIAN_POINT('',(154.120176,-116.035468,-7.5E-02)); +#480543 = VECTOR('',#480544,1.); +#480544 = DIRECTION('',(0.,-1.,0.)); +#480545 = ORIENTED_EDGE('',*,*,#480546,.T.); +#480546 = EDGE_CURVE('',#480539,#480547,#480549,.T.); +#480547 = VERTEX_POINT('',#480548); +#480548 = CARTESIAN_POINT('',(154.105701,-116.282455,-7.5E-02)); +#480549 = LINE('',#480550,#480551); +#480550 = CARTESIAN_POINT('',(154.120176,-116.248489,-7.5E-02)); +#480551 = VECTOR('',#480552,1.); +#480552 = DIRECTION('',(-0.392045460213,-0.919945844671,0.)); +#480553 = ORIENTED_EDGE('',*,*,#480554,.T.); +#480554 = EDGE_CURVE('',#480547,#480555,#480557,.T.); +#480555 = VERTEX_POINT('',#480556); +#480556 = CARTESIAN_POINT('',(154.203473,-116.282455,-7.5E-02)); +#480557 = LINE('',#480558,#480559); +#480558 = CARTESIAN_POINT('',(154.105701,-116.282455,-7.5E-02)); +#480559 = VECTOR('',#480560,1.); +#480560 = DIRECTION('',(1.,0.,0.)); +#480561 = ORIENTED_EDGE('',*,*,#480562,.T.); +#480562 = EDGE_CURVE('',#480555,#480563,#480565,.T.); +#480563 = VERTEX_POINT('',#480564); +#480564 = CARTESIAN_POINT('',(154.355752,-116.130175,-7.5E-02)); +#480565 = CIRCLE('',#480566,0.215065806118); +#480566 = AXIS2_PLACEMENT_3D('',#480567,#480568,#480569); +#480567 = CARTESIAN_POINT('',(154.14797093076,-116.0746742952,-7.5E-02) + ); +#480568 = DIRECTION('',(0.,0.,1.)); +#480569 = DIRECTION('',(0.258070170409,-0.966126175582,0.)); +#480570 = ORIENTED_EDGE('',*,*,#480571,.T.); +#480571 = EDGE_CURVE('',#480563,#480572,#480574,.T.); +#480572 = VERTEX_POINT('',#480573); +#480573 = CARTESIAN_POINT('',(154.355752,-116.010925,-7.5E-02)); +#480574 = LINE('',#480575,#480576); +#480575 = CARTESIAN_POINT('',(154.355752,-116.130175,-7.5E-02)); +#480576 = VECTOR('',#480577,1.); +#480577 = DIRECTION('',(0.,1.,0.)); +#480578 = ORIENTED_EDGE('',*,*,#480579,.T.); +#480579 = EDGE_CURVE('',#480572,#480580,#480582,.T.); +#480580 = VERTEX_POINT('',#480581); +#480581 = CARTESIAN_POINT('',(154.313412,-115.926245,-7.5E-02)); +#480582 = LINE('',#480583,#480584); +#480583 = CARTESIAN_POINT('',(154.355752,-116.010925,-7.5E-02)); +#480584 = VECTOR('',#480585,1.); +#480585 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#480586 = ORIENTED_EDGE('',*,*,#480587,.T.); +#480587 = EDGE_CURVE('',#480580,#480588,#480590,.T.); +#480588 = VERTEX_POINT('',#480589); +#480589 = CARTESIAN_POINT('',(154.402854,-115.881523,-7.5E-02)); +#480590 = CIRCLE('',#480591,4.999982162111E-02); +#480591 = AXIS2_PLACEMENT_3D('',#480592,#480593,#480594); +#480592 = CARTESIAN_POINT('',(154.35813283073,-115.9038836614,-7.5E-02) + ); +#480593 = DIRECTION('',(0.,0.,-1.)); +#480594 = DIRECTION('',(-0.89441980564,-0.447228365916,-0.)); +#480595 = ORIENTED_EDGE('',*,*,#480596,.T.); +#480596 = EDGE_CURVE('',#480588,#480597,#480599,.T.); +#480597 = VERTEX_POINT('',#480598); +#480598 = CARTESIAN_POINT('',(154.453509,-115.987849,-7.5E-02)); +#480599 = LINE('',#480600,#480601); +#480600 = CARTESIAN_POINT('',(154.402854,-115.881523,-7.5E-02)); +#480601 = VECTOR('',#480602,1.); +#480602 = DIRECTION('',(0.430096717347,-0.902782816477,0.)); +#480603 = ORIENTED_EDGE('',*,*,#480604,.T.); +#480604 = EDGE_CURVE('',#480597,#480605,#480607,.T.); +#480605 = VERTEX_POINT('',#480606); +#480606 = CARTESIAN_POINT('',(154.453509,-116.153251,-7.5E-02)); +#480607 = LINE('',#480608,#480609); +#480608 = CARTESIAN_POINT('',(154.453509,-115.987849,-7.5E-02)); +#480609 = VECTOR('',#480610,1.); +#480610 = DIRECTION('',(0.,-1.,0.)); +#480611 = ORIENTED_EDGE('',*,*,#480612,.T.); +#480612 = EDGE_CURVE('',#480605,#480613,#480615,.T.); +#480613 = VERTEX_POINT('',#480614); +#480614 = CARTESIAN_POINT('',(154.393488,-116.272573,-7.5E-02)); +#480615 = LINE('',#480616,#480617); +#480616 = CARTESIAN_POINT('',(154.453509,-116.153251,-7.5E-02)); +#480617 = VECTOR('',#480618,1.); +#480618 = DIRECTION('',(-0.449368510164,-0.893346484894,0.)); +#480619 = ORIENTED_EDGE('',*,*,#480620,.T.); +#480620 = EDGE_CURVE('',#480613,#480621,#480623,.T.); +#480621 = VERTEX_POINT('',#480622); +#480622 = CARTESIAN_POINT('',(154.332874,-116.329558,-7.5E-02)); +#480623 = LINE('',#480624,#480625); +#480624 = CARTESIAN_POINT('',(154.393488,-116.272573,-7.5E-02)); +#480625 = VECTOR('',#480626,1.); +#480626 = DIRECTION('',(-0.728580638815,-0.684960037333,0.)); +#480627 = ORIENTED_EDGE('',*,*,#480628,.T.); +#480628 = EDGE_CURVE('',#480621,#480629,#480631,.T.); +#480629 = VERTEX_POINT('',#480630); +#480630 = CARTESIAN_POINT('',(154.226548,-116.380212,-7.5E-02)); +#480631 = LINE('',#480632,#480633); +#480632 = CARTESIAN_POINT('',(154.332874,-116.329558,-7.5E-02)); +#480633 = VECTOR('',#480634,1.); +#480634 = DIRECTION('',(-0.902786113268,-0.430089797241,0.)); +#480635 = ORIENTED_EDGE('',*,*,#480636,.T.); +#480636 = EDGE_CURVE('',#480629,#480637,#480639,.T.); +#480637 = VERTEX_POINT('',#480638); +#480638 = CARTESIAN_POINT('',(153.405752,-116.382455,-7.5E-02)); +#480639 = LINE('',#480640,#480641); +#480640 = CARTESIAN_POINT('',(154.226548,-116.380212,-7.5E-02)); +#480641 = VECTOR('',#480642,1.); +#480642 = DIRECTION('',(-0.99999626616,-2.732702918863E-03,0.)); +#480643 = ORIENTED_EDGE('',*,*,#480644,.T.); +#480644 = EDGE_CURVE('',#480637,#480645,#480647,.T.); +#480645 = VERTEX_POINT('',#480646); +#480646 = CARTESIAN_POINT('',(153.359558,-116.313321,-7.5E-02)); +#480647 = CIRCLE('',#480648,5.000005199708E-02); +#480648 = AXIS2_PLACEMENT_3D('',#480649,#480650,#480651); +#480649 = CARTESIAN_POINT('',(153.40575212553,-116.332454948,-7.5E-02)); +#480650 = DIRECTION('',(0.,0.,-1.)); +#480651 = DIRECTION('',(-2.510606922717E-06,-0.999999999997,-0.)); +#480652 = ORIENTED_EDGE('',*,*,#480653,.T.); +#480653 = EDGE_CURVE('',#480645,#480654,#480656,.T.); +#480654 = VERTEX_POINT('',#480655); +#480655 = CARTESIAN_POINT('',(153.378454,-116.294424,-7.5E-02)); +#480656 = LINE('',#480657,#480658); +#480657 = CARTESIAN_POINT('',(153.359558,-116.313321,-7.5E-02)); +#480658 = VECTOR('',#480659,1.); +#480659 = DIRECTION('',(0.707088070946,0.707125490932,0.)); +#480660 = ORIENTED_EDGE('',*,*,#480661,.T.); +#480661 = EDGE_CURVE('',#480654,#480662,#480664,.T.); +#480662 = VERTEX_POINT('',#480663); +#480663 = CARTESIAN_POINT('',(153.355878,-116.240762,-7.5E-02)); +#480664 = LINE('',#480665,#480666); +#480665 = CARTESIAN_POINT('',(153.378454,-116.294424,-7.5E-02)); +#480666 = VECTOR('',#480667,1.); +#480667 = DIRECTION('',(-0.387786678901,0.921749147907,0.)); +#480668 = ORIENTED_EDGE('',*,*,#480669,.T.); +#480669 = EDGE_CURVE('',#480662,#480670,#480672,.T.); +#480670 = VERTEX_POINT('',#480671); +#480671 = CARTESIAN_POINT('',(153.357994,-116.035468,-7.5E-02)); +#480672 = LINE('',#480673,#480674); +#480673 = CARTESIAN_POINT('',(153.355878,-116.240762,-7.5E-02)); +#480674 = VECTOR('',#480675,1.); +#480675 = DIRECTION('',(1.030662176892E-02,0.999946885363,0.)); +#480676 = ORIENTED_EDGE('',*,*,#480677,.T.); +#480677 = EDGE_CURVE('',#480670,#480678,#480680,.T.); +#480678 = VERTEX_POINT('',#480679); +#480679 = CARTESIAN_POINT('',(153.418016,-115.916148,-7.5E-02)); +#480680 = LINE('',#480681,#480682); +#480681 = CARTESIAN_POINT('',(153.357994,-116.035468,-7.5E-02)); +#480682 = VECTOR('',#480683,1.); +#480683 = DIRECTION('',(0.449380496335,0.893340455545,0.)); +#480684 = ORIENTED_EDGE('',*,*,#480685,.T.); +#480685 = EDGE_CURVE('',#480678,#480489,#480686,.T.); +#480686 = LINE('',#480687,#480688); +#480687 = CARTESIAN_POINT('',(153.418016,-115.916148,-7.5E-02)); +#480688 = VECTOR('',#480689,1.); +#480689 = DIRECTION('',(0.728574999312,0.68496603593,0.)); +#480690 = FACE_BOUND('',#480691,.T.); +#480691 = EDGE_LOOP('',(#480692,#480703,#480711,#480719,#480727,#480735, + #480743,#480751,#480759,#480767)); +#480692 = ORIENTED_EDGE('',*,*,#480693,.T.); +#480693 = EDGE_CURVE('',#480694,#480696,#480698,.T.); +#480694 = VERTEX_POINT('',#480695); +#480695 = CARTESIAN_POINT('',(153.947561,-115.944976,-7.5E-02)); +#480696 = VERTEX_POINT('',#480697); +#480697 = CARTESIAN_POINT('',(153.530608,-115.944976,-7.5E-02)); +#480698 = CIRCLE('',#480699,0.382072162856); +#480699 = AXIS2_PLACEMENT_3D('',#480700,#480701,#480702); +#480700 = CARTESIAN_POINT('',(153.7390845,-116.2651582708,-7.5E-02)); +#480701 = DIRECTION('',(0.,0.,1.)); +#480702 = DIRECTION('',(0.545646922931,0.838015176173,-0.)); +#480703 = ORIENTED_EDGE('',*,*,#480704,.T.); +#480704 = EDGE_CURVE('',#480696,#480705,#480707,.T.); +#480705 = VERTEX_POINT('',#480706); +#480706 = CARTESIAN_POINT('',(153.494463,-115.98112,-7.5E-02)); +#480707 = LINE('',#480708,#480709); +#480708 = CARTESIAN_POINT('',(153.530608,-115.944976,-7.5E-02)); +#480709 = VECTOR('',#480710,1.); +#480710 = DIRECTION('',(-0.707116562784,-0.707096999454,0.)); +#480711 = ORIENTED_EDGE('',*,*,#480712,.T.); +#480712 = EDGE_CURVE('',#480705,#480713,#480715,.T.); +#480713 = VERTEX_POINT('',#480714); +#480714 = CARTESIAN_POINT('',(153.455752,-116.058544,-7.5E-02)); +#480715 = LINE('',#480716,#480717); +#480716 = CARTESIAN_POINT('',(153.494463,-115.98112,-7.5E-02)); +#480717 = VECTOR('',#480718,1.); +#480718 = DIRECTION('',(-0.447204353569,-0.894431811906,0.)); +#480719 = ORIENTED_EDGE('',*,*,#480720,.T.); +#480720 = EDGE_CURVE('',#480713,#480721,#480723,.T.); +#480721 = VERTEX_POINT('',#480722); +#480722 = CARTESIAN_POINT('',(153.455752,-116.225414,-7.5E-02)); +#480723 = LINE('',#480724,#480725); +#480724 = CARTESIAN_POINT('',(153.455752,-116.058544,-7.5E-02)); +#480725 = VECTOR('',#480726,1.); +#480726 = DIRECTION('',(0.,-1.,0.)); +#480727 = ORIENTED_EDGE('',*,*,#480728,.T.); +#480728 = EDGE_CURVE('',#480721,#480729,#480731,.T.); +#480729 = VERTEX_POINT('',#480730); +#480730 = CARTESIAN_POINT('',(153.484272,-116.282455,-7.5E-02)); +#480731 = LINE('',#480732,#480733); +#480732 = CARTESIAN_POINT('',(153.455752,-116.225414,-7.5E-02)); +#480733 = VECTOR('',#480734,1.); +#480734 = DIRECTION('',(0.447207323297,-0.894430327074,0.)); +#480735 = ORIENTED_EDGE('',*,*,#480736,.T.); +#480736 = EDGE_CURVE('',#480729,#480737,#480739,.T.); +#480737 = VERTEX_POINT('',#480738); +#480738 = CARTESIAN_POINT('',(153.993898,-116.282455,-7.5E-02)); +#480739 = LINE('',#480740,#480741); +#480740 = CARTESIAN_POINT('',(153.484272,-116.282455,-7.5E-02)); +#480741 = VECTOR('',#480742,1.); +#480742 = DIRECTION('',(1.,0.,0.)); +#480743 = ORIENTED_EDGE('',*,*,#480744,.T.); +#480744 = EDGE_CURVE('',#480737,#480745,#480747,.T.); +#480745 = VERTEX_POINT('',#480746); +#480746 = CARTESIAN_POINT('',(154.022419,-116.225413,-7.5E-02)); +#480747 = LINE('',#480748,#480749); +#480748 = CARTESIAN_POINT('',(153.993898,-116.282455,-7.5E-02)); +#480749 = VECTOR('',#480750,1.); +#480750 = DIRECTION('',(0.4472135955,0.894427191,0.)); +#480751 = ORIENTED_EDGE('',*,*,#480752,.T.); +#480752 = EDGE_CURVE('',#480745,#480753,#480755,.T.); +#480753 = VERTEX_POINT('',#480754); +#480754 = CARTESIAN_POINT('',(154.022419,-116.058544,-7.5E-02)); +#480755 = LINE('',#480756,#480757); +#480756 = CARTESIAN_POINT('',(154.022419,-116.225413,-7.5E-02)); +#480757 = VECTOR('',#480758,1.); +#480758 = DIRECTION('',(0.,1.,0.)); +#480759 = ORIENTED_EDGE('',*,*,#480760,.T.); +#480760 = EDGE_CURVE('',#480753,#480761,#480763,.T.); +#480761 = VERTEX_POINT('',#480762); +#480762 = CARTESIAN_POINT('',(153.983708,-115.981122,-7.5E-02)); +#480763 = LINE('',#480764,#480765); +#480764 = CARTESIAN_POINT('',(154.022419,-116.058544,-7.5E-02)); +#480765 = VECTOR('',#480766,1.); +#480766 = DIRECTION('',(-0.4472135955,0.894427191,0.)); +#480767 = ORIENTED_EDGE('',*,*,#480768,.T.); +#480768 = EDGE_CURVE('',#480761,#480694,#480769,.T.); +#480769 = LINE('',#480770,#480771); +#480770 = CARTESIAN_POINT('',(153.983708,-115.981122,-7.5E-02)); +#480771 = VECTOR('',#480772,1.); +#480772 = DIRECTION('',(-0.707116562243,0.707096999995,0.)); +#480773 = PLANE('',#480774); +#480774 = AXIS2_PLACEMENT_3D('',#480775,#480776,#480777); +#480775 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480776 = DIRECTION('',(-0.,-0.,-1.)); +#480777 = DIRECTION('',(-1.,0.,0.)); +#480778 = SHELL_BASED_SURFACE_MODEL('',(#480779)); +#480779 = OPEN_SHELL('',(#480780)); +#480780 = ADVANCED_FACE('',(#480781),#480817,.T.); +#480781 = FACE_BOUND('',#480782,.T.); +#480782 = EDGE_LOOP('',(#480783,#480794,#480802,#480811)); +#480783 = ORIENTED_EDGE('',*,*,#480784,.T.); +#480784 = EDGE_CURVE('',#480785,#480787,#480789,.T.); +#480785 = VERTEX_POINT('',#480786); +#480786 = CARTESIAN_POINT('',(138.688748,-116.325,-7.5E-02)); +#480787 = VERTEX_POINT('',#480788); +#480788 = CARTESIAN_POINT('',(138.688748,-116.205,-7.5E-02)); +#480789 = CIRCLE('',#480790,6.000000000043E-02); +#480790 = AXIS2_PLACEMENT_3D('',#480791,#480792,#480793); +#480791 = CARTESIAN_POINT('',(138.68874777441,-116.265,-7.5E-02)); +#480792 = DIRECTION('',(0.,0.,-1.)); +#480793 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#480794 = ORIENTED_EDGE('',*,*,#480795,.T.); +#480795 = EDGE_CURVE('',#480787,#480796,#480798,.T.); +#480796 = VERTEX_POINT('',#480797); +#480797 = CARTESIAN_POINT('',(139.211252,-116.205,-7.5E-02)); +#480798 = LINE('',#480799,#480800); +#480799 = CARTESIAN_POINT('',(138.688748,-116.205,-7.5E-02)); +#480800 = VECTOR('',#480801,1.); +#480801 = DIRECTION('',(1.,0.,0.)); +#480802 = ORIENTED_EDGE('',*,*,#480803,.T.); +#480803 = EDGE_CURVE('',#480796,#480804,#480806,.T.); +#480804 = VERTEX_POINT('',#480805); +#480805 = CARTESIAN_POINT('',(139.211252,-116.325,-7.5E-02)); +#480806 = CIRCLE('',#480807,6.000000000043E-02); +#480807 = AXIS2_PLACEMENT_3D('',#480808,#480809,#480810); +#480808 = CARTESIAN_POINT('',(139.21125222558,-116.265,-7.5E-02)); +#480809 = DIRECTION('',(0.,0.,-1.)); +#480810 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#480811 = ORIENTED_EDGE('',*,*,#480812,.T.); +#480812 = EDGE_CURVE('',#480804,#480785,#480813,.T.); +#480813 = LINE('',#480814,#480815); +#480814 = CARTESIAN_POINT('',(139.211252,-116.325,-7.5E-02)); +#480815 = VECTOR('',#480816,1.); +#480816 = DIRECTION('',(-1.,0.,0.)); +#480817 = PLANE('',#480818); +#480818 = AXIS2_PLACEMENT_3D('',#480819,#480820,#480821); +#480819 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480820 = DIRECTION('',(-0.,-0.,-1.)); +#480821 = DIRECTION('',(-1.,0.,0.)); +#480822 = SHELL_BASED_SURFACE_MODEL('',(#480823)); +#480823 = OPEN_SHELL('',(#480824)); +#480824 = ADVANCED_FACE('',(#480825),#480869,.T.); +#480825 = FACE_BOUND('',#480826,.T.); +#480826 = EDGE_LOOP('',(#480827,#480838,#480846,#480855,#480863)); +#480827 = ORIENTED_EDGE('',*,*,#480828,.T.); +#480828 = EDGE_CURVE('',#480829,#480831,#480833,.T.); +#480829 = VERTEX_POINT('',#480830); +#480830 = CARTESIAN_POINT('',(122.089567,-115.073398,-7.5E-02)); +#480831 = VERTEX_POINT('',#480832); +#480832 = CARTESIAN_POINT('',(122.205,-115.096359,-7.5E-02)); +#480833 = CIRCLE('',#480834,6.000007318647E-02); +#480834 = AXIS2_PLACEMENT_3D('',#480835,#480836,#480837); +#480835 = CARTESIAN_POINT('',(122.14499992681,-115.0963588233,-7.5E-02) + ); +#480836 = DIRECTION('',(0.,0.,-1.)); +#480837 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#480838 = ORIENTED_EDGE('',*,*,#480839,.T.); +#480839 = EDGE_CURVE('',#480831,#480840,#480842,.T.); +#480840 = VERTEX_POINT('',#480841); +#480841 = CARTESIAN_POINT('',(122.205,-115.403641,-7.5E-02)); +#480842 = LINE('',#480843,#480844); +#480843 = CARTESIAN_POINT('',(122.205,-115.096359,-7.5E-02)); +#480844 = VECTOR('',#480845,1.); +#480845 = DIRECTION('',(0.,-1.,0.)); +#480846 = ORIENTED_EDGE('',*,*,#480847,.T.); +#480847 = EDGE_CURVE('',#480840,#480848,#480850,.T.); +#480848 = VERTEX_POINT('',#480849); +#480849 = CARTESIAN_POINT('',(122.085,-115.403641,-7.5E-02)); +#480850 = CIRCLE('',#480851,6.000000000043E-02); +#480851 = AXIS2_PLACEMENT_3D('',#480852,#480853,#480854); +#480852 = CARTESIAN_POINT('',(122.145,-115.4036412255,-7.5E-02)); +#480853 = DIRECTION('',(0.,0.,-1.)); +#480854 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#480855 = ORIENTED_EDGE('',*,*,#480856,.T.); +#480856 = EDGE_CURVE('',#480848,#480857,#480859,.T.); +#480857 = VERTEX_POINT('',#480858); +#480858 = CARTESIAN_POINT('',(122.085,-115.096359,-7.5E-02)); +#480859 = LINE('',#480860,#480861); +#480860 = CARTESIAN_POINT('',(122.085,-115.403641,-7.5E-02)); +#480861 = VECTOR('',#480862,1.); +#480862 = DIRECTION('',(0.,1.,0.)); +#480863 = ORIENTED_EDGE('',*,*,#480864,.T.); +#480864 = EDGE_CURVE('',#480857,#480829,#480865,.T.); +#480865 = LINE('',#480866,#480867); +#480866 = CARTESIAN_POINT('',(122.085,-115.096359,-7.5E-02)); +#480867 = VECTOR('',#480868,1.); +#480868 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#480869 = PLANE('',#480870); +#480870 = AXIS2_PLACEMENT_3D('',#480871,#480872,#480873); +#480871 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480872 = DIRECTION('',(-0.,-0.,-1.)); +#480873 = DIRECTION('',(-1.,0.,0.)); +#480874 = SHELL_BASED_SURFACE_MODEL('',(#480875)); +#480875 = OPEN_SHELL('',(#480876)); +#480876 = ADVANCED_FACE('',(#480877),#480921,.T.); +#480877 = FACE_BOUND('',#480878,.T.); +#480878 = EDGE_LOOP('',(#480879,#480890,#480898,#480907,#480915)); +#480879 = ORIENTED_EDGE('',*,*,#480880,.T.); +#480880 = EDGE_CURVE('',#480881,#480883,#480885,.T.); +#480881 = VERTEX_POINT('',#480882); +#480882 = CARTESIAN_POINT('',(122.849567,-115.073398,-7.5E-02)); +#480883 = VERTEX_POINT('',#480884); +#480884 = CARTESIAN_POINT('',(122.965,-115.096359,-7.5E-02)); +#480885 = CIRCLE('',#480886,6.000007318648E-02); +#480886 = AXIS2_PLACEMENT_3D('',#480887,#480888,#480889); +#480887 = CARTESIAN_POINT('',(122.90499992681,-115.0963588233,-7.5E-02) + ); +#480888 = DIRECTION('',(0.,0.,-1.)); +#480889 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#480890 = ORIENTED_EDGE('',*,*,#480891,.T.); +#480891 = EDGE_CURVE('',#480883,#480892,#480894,.T.); +#480892 = VERTEX_POINT('',#480893); +#480893 = CARTESIAN_POINT('',(122.965,-115.403641,-7.5E-02)); +#480894 = LINE('',#480895,#480896); +#480895 = CARTESIAN_POINT('',(122.965,-115.096359,-7.5E-02)); +#480896 = VECTOR('',#480897,1.); +#480897 = DIRECTION('',(0.,-1.,0.)); +#480898 = ORIENTED_EDGE('',*,*,#480899,.T.); +#480899 = EDGE_CURVE('',#480892,#480900,#480902,.T.); +#480900 = VERTEX_POINT('',#480901); +#480901 = CARTESIAN_POINT('',(122.845,-115.403641,-7.5E-02)); +#480902 = CIRCLE('',#480903,6.000000000043E-02); +#480903 = AXIS2_PLACEMENT_3D('',#480904,#480905,#480906); +#480904 = CARTESIAN_POINT('',(122.905,-115.4036412255,-7.5E-02)); +#480905 = DIRECTION('',(0.,0.,-1.)); +#480906 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#480907 = ORIENTED_EDGE('',*,*,#480908,.T.); +#480908 = EDGE_CURVE('',#480900,#480909,#480911,.T.); +#480909 = VERTEX_POINT('',#480910); +#480910 = CARTESIAN_POINT('',(122.845,-115.096359,-7.5E-02)); +#480911 = LINE('',#480912,#480913); +#480912 = CARTESIAN_POINT('',(122.845,-115.403641,-7.5E-02)); +#480913 = VECTOR('',#480914,1.); +#480914 = DIRECTION('',(0.,1.,0.)); +#480915 = ORIENTED_EDGE('',*,*,#480916,.T.); +#480916 = EDGE_CURVE('',#480909,#480881,#480917,.T.); +#480917 = LINE('',#480918,#480919); +#480918 = CARTESIAN_POINT('',(122.845,-115.096359,-7.5E-02)); +#480919 = VECTOR('',#480920,1.); +#480920 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#480921 = PLANE('',#480922); +#480922 = AXIS2_PLACEMENT_3D('',#480923,#480924,#480925); +#480923 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480924 = DIRECTION('',(-0.,-0.,-1.)); +#480925 = DIRECTION('',(-1.,0.,0.)); +#480926 = SHELL_BASED_SURFACE_MODEL('',(#480927)); +#480927 = OPEN_SHELL('',(#480928)); +#480928 = ADVANCED_FACE('',(#480929),#480965,.T.); +#480929 = FACE_BOUND('',#480930,.T.); +#480930 = EDGE_LOOP('',(#480931,#480942,#480950,#480959)); +#480931 = ORIENTED_EDGE('',*,*,#480932,.T.); +#480932 = EDGE_CURVE('',#480933,#480935,#480937,.T.); +#480933 = VERTEX_POINT('',#480934); +#480934 = CARTESIAN_POINT('',(147.856359,-114.94,-7.5E-02)); +#480935 = VERTEX_POINT('',#480936); +#480936 = CARTESIAN_POINT('',(147.856359,-114.82,-7.5E-02)); +#480937 = CIRCLE('',#480938,6.000000000042E-02); +#480938 = AXIS2_PLACEMENT_3D('',#480939,#480940,#480941); +#480939 = CARTESIAN_POINT('',(147.85635877441,-114.88,-7.5E-02)); +#480940 = DIRECTION('',(0.,0.,-1.)); +#480941 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#480942 = ORIENTED_EDGE('',*,*,#480943,.T.); +#480943 = EDGE_CURVE('',#480935,#480944,#480946,.T.); +#480944 = VERTEX_POINT('',#480945); +#480945 = CARTESIAN_POINT('',(148.163641,-114.82,-7.5E-02)); +#480946 = LINE('',#480947,#480948); +#480947 = CARTESIAN_POINT('',(147.856359,-114.82,-7.5E-02)); +#480948 = VECTOR('',#480949,1.); +#480949 = DIRECTION('',(1.,0.,0.)); +#480950 = ORIENTED_EDGE('',*,*,#480951,.T.); +#480951 = EDGE_CURVE('',#480944,#480952,#480954,.T.); +#480952 = VERTEX_POINT('',#480953); +#480953 = CARTESIAN_POINT('',(148.163641,-114.94,-7.5E-02)); +#480954 = CIRCLE('',#480955,6.000000000043E-02); +#480955 = AXIS2_PLACEMENT_3D('',#480956,#480957,#480958); +#480956 = CARTESIAN_POINT('',(148.16364122558,-114.88,-7.5E-02)); +#480957 = DIRECTION('',(0.,0.,-1.)); +#480958 = DIRECTION('',(-3.759793779989E-06,0.999999999993,-0.)); +#480959 = ORIENTED_EDGE('',*,*,#480960,.T.); +#480960 = EDGE_CURVE('',#480952,#480933,#480961,.T.); +#480961 = LINE('',#480962,#480963); +#480962 = CARTESIAN_POINT('',(148.163641,-114.94,-7.5E-02)); +#480963 = VECTOR('',#480964,1.); +#480964 = DIRECTION('',(-1.,0.,0.)); +#480965 = PLANE('',#480966); +#480966 = AXIS2_PLACEMENT_3D('',#480967,#480968,#480969); +#480967 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#480968 = DIRECTION('',(-0.,-0.,-1.)); +#480969 = DIRECTION('',(-1.,0.,0.)); +#480970 = SHELL_BASED_SURFACE_MODEL('',(#480971)); +#480971 = OPEN_SHELL('',(#480972)); +#480972 = ADVANCED_FACE('',(#480973),#481017,.T.); +#480973 = FACE_BOUND('',#480974,.T.); +#480974 = EDGE_LOOP('',(#480975,#480986,#480994,#481003,#481011)); +#480975 = ORIENTED_EDGE('',*,*,#480976,.T.); +#480976 = EDGE_CURVE('',#480977,#480979,#480981,.T.); +#480977 = VERTEX_POINT('',#480978); +#480978 = CARTESIAN_POINT('',(151.364567,-114.173398,-7.5E-02)); +#480979 = VERTEX_POINT('',#480980); +#480980 = CARTESIAN_POINT('',(151.48,-114.196359,-7.5E-02)); +#480981 = CIRCLE('',#480982,6.000007318647E-02); +#480982 = AXIS2_PLACEMENT_3D('',#480983,#480984,#480985); +#480983 = CARTESIAN_POINT('',(151.41999992681,-114.1963588233,-7.5E-02) + ); +#480984 = DIRECTION('',(0.,0.,-1.)); +#480985 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#480986 = ORIENTED_EDGE('',*,*,#480987,.T.); +#480987 = EDGE_CURVE('',#480979,#480988,#480990,.T.); +#480988 = VERTEX_POINT('',#480989); +#480989 = CARTESIAN_POINT('',(151.48,-114.503641,-7.5E-02)); +#480990 = LINE('',#480991,#480992); +#480991 = CARTESIAN_POINT('',(151.48,-114.196359,-7.5E-02)); +#480992 = VECTOR('',#480993,1.); +#480993 = DIRECTION('',(0.,-1.,0.)); +#480994 = ORIENTED_EDGE('',*,*,#480995,.T.); +#480995 = EDGE_CURVE('',#480988,#480996,#480998,.T.); +#480996 = VERTEX_POINT('',#480997); +#480997 = CARTESIAN_POINT('',(151.36,-114.503641,-7.5E-02)); +#480998 = CIRCLE('',#480999,6.000000000042E-02); +#480999 = AXIS2_PLACEMENT_3D('',#481000,#481001,#481002); +#481000 = CARTESIAN_POINT('',(151.42,-114.5036412255,-7.5E-02)); +#481001 = DIRECTION('',(0.,0.,-1.)); +#481002 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#481003 = ORIENTED_EDGE('',*,*,#481004,.T.); +#481004 = EDGE_CURVE('',#480996,#481005,#481007,.T.); +#481005 = VERTEX_POINT('',#481006); +#481006 = CARTESIAN_POINT('',(151.36,-114.196359,-7.5E-02)); +#481007 = LINE('',#481008,#481009); +#481008 = CARTESIAN_POINT('',(151.36,-114.503641,-7.5E-02)); +#481009 = VECTOR('',#481010,1.); +#481010 = DIRECTION('',(0.,1.,0.)); +#481011 = ORIENTED_EDGE('',*,*,#481012,.T.); +#481012 = EDGE_CURVE('',#481005,#480977,#481013,.T.); +#481013 = LINE('',#481014,#481015); +#481014 = CARTESIAN_POINT('',(151.36,-114.196359,-7.5E-02)); +#481015 = VECTOR('',#481016,1.); +#481016 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#481017 = PLANE('',#481018); +#481018 = AXIS2_PLACEMENT_3D('',#481019,#481020,#481021); +#481019 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481020 = DIRECTION('',(-0.,-0.,-1.)); +#481021 = DIRECTION('',(-1.,0.,0.)); +#481022 = SHELL_BASED_SURFACE_MODEL('',(#481023)); +#481023 = OPEN_SHELL('',(#481024)); +#481024 = ADVANCED_FACE('',(#481025),#481069,.T.); +#481025 = FACE_BOUND('',#481026,.T.); +#481026 = EDGE_LOOP('',(#481027,#481038,#481046,#481055,#481063)); +#481027 = ORIENTED_EDGE('',*,*,#481028,.T.); +#481028 = EDGE_CURVE('',#481029,#481031,#481033,.T.); +#481029 = VERTEX_POINT('',#481030); +#481030 = CARTESIAN_POINT('',(152.124567,-114.173398,-7.5E-02)); +#481031 = VERTEX_POINT('',#481032); +#481032 = CARTESIAN_POINT('',(152.24,-114.196359,-7.5E-02)); +#481033 = CIRCLE('',#481034,6.000007318646E-02); +#481034 = AXIS2_PLACEMENT_3D('',#481035,#481036,#481037); +#481035 = CARTESIAN_POINT('',(152.17999992681,-114.1963588233,-7.5E-02) + ); +#481036 = DIRECTION('',(0.,0.,-1.)); +#481037 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481038 = ORIENTED_EDGE('',*,*,#481039,.T.); +#481039 = EDGE_CURVE('',#481031,#481040,#481042,.T.); +#481040 = VERTEX_POINT('',#481041); +#481041 = CARTESIAN_POINT('',(152.24,-114.503641,-7.5E-02)); +#481042 = LINE('',#481043,#481044); +#481043 = CARTESIAN_POINT('',(152.24,-114.196359,-7.5E-02)); +#481044 = VECTOR('',#481045,1.); +#481045 = DIRECTION('',(0.,-1.,0.)); +#481046 = ORIENTED_EDGE('',*,*,#481047,.T.); +#481047 = EDGE_CURVE('',#481040,#481048,#481050,.T.); +#481048 = VERTEX_POINT('',#481049); +#481049 = CARTESIAN_POINT('',(152.12,-114.503641,-7.5E-02)); +#481050 = CIRCLE('',#481051,6.000000000043E-02); +#481051 = AXIS2_PLACEMENT_3D('',#481052,#481053,#481054); +#481052 = CARTESIAN_POINT('',(152.18,-114.5036412255,-7.5E-02)); +#481053 = DIRECTION('',(0.,0.,-1.)); +#481054 = DIRECTION('',(0.999999999993,3.759793779989E-06,0.)); +#481055 = ORIENTED_EDGE('',*,*,#481056,.T.); +#481056 = EDGE_CURVE('',#481048,#481057,#481059,.T.); +#481057 = VERTEX_POINT('',#481058); +#481058 = CARTESIAN_POINT('',(152.12,-114.196359,-7.5E-02)); +#481059 = LINE('',#481060,#481061); +#481060 = CARTESIAN_POINT('',(152.12,-114.503641,-7.5E-02)); +#481061 = VECTOR('',#481062,1.); +#481062 = DIRECTION('',(0.,1.,0.)); +#481063 = ORIENTED_EDGE('',*,*,#481064,.T.); +#481064 = EDGE_CURVE('',#481057,#481029,#481065,.T.); +#481065 = LINE('',#481066,#481067); +#481066 = CARTESIAN_POINT('',(152.12,-114.196359,-7.5E-02)); +#481067 = VECTOR('',#481068,1.); +#481068 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481069 = PLANE('',#481070); +#481070 = AXIS2_PLACEMENT_3D('',#481071,#481072,#481073); +#481071 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481072 = DIRECTION('',(-0.,-0.,-1.)); +#481073 = DIRECTION('',(-1.,0.,0.)); +#481074 = SHELL_BASED_SURFACE_MODEL('',(#481075)); +#481075 = OPEN_SHELL('',(#481076)); +#481076 = ADVANCED_FACE('',(#481077),#481113,.T.); +#481077 = FACE_BOUND('',#481078,.T.); +#481078 = EDGE_LOOP('',(#481079,#481090,#481098,#481107)); +#481079 = ORIENTED_EDGE('',*,*,#481080,.T.); +#481080 = EDGE_CURVE('',#481081,#481083,#481085,.T.); +#481081 = VERTEX_POINT('',#481082); +#481082 = CARTESIAN_POINT('',(147.856359,-114.18,-7.5E-02)); +#481083 = VERTEX_POINT('',#481084); +#481084 = CARTESIAN_POINT('',(147.856359,-114.06,-7.5E-02)); +#481085 = CIRCLE('',#481086,6.000000000043E-02); +#481086 = AXIS2_PLACEMENT_3D('',#481087,#481088,#481089); +#481087 = CARTESIAN_POINT('',(147.85635877441,-114.12,-7.5E-02)); +#481088 = DIRECTION('',(0.,0.,-1.)); +#481089 = DIRECTION('',(3.759793779989E-06,-0.999999999993,0.)); +#481090 = ORIENTED_EDGE('',*,*,#481091,.T.); +#481091 = EDGE_CURVE('',#481083,#481092,#481094,.T.); +#481092 = VERTEX_POINT('',#481093); +#481093 = CARTESIAN_POINT('',(148.163641,-114.06,-7.5E-02)); +#481094 = LINE('',#481095,#481096); +#481095 = CARTESIAN_POINT('',(147.856359,-114.06,-7.5E-02)); +#481096 = VECTOR('',#481097,1.); +#481097 = DIRECTION('',(1.,0.,0.)); +#481098 = ORIENTED_EDGE('',*,*,#481099,.T.); +#481099 = EDGE_CURVE('',#481092,#481100,#481102,.T.); +#481100 = VERTEX_POINT('',#481101); +#481101 = CARTESIAN_POINT('',(148.163641,-114.18,-7.5E-02)); +#481102 = CIRCLE('',#481103,6.000000000042E-02); +#481103 = AXIS2_PLACEMENT_3D('',#481104,#481105,#481106); +#481104 = CARTESIAN_POINT('',(148.16364122558,-114.12,-7.5E-02)); +#481105 = DIRECTION('',(0.,0.,-1.)); +#481106 = DIRECTION('',(-3.759794253684E-06,0.999999999993,-0.)); +#481107 = ORIENTED_EDGE('',*,*,#481108,.T.); +#481108 = EDGE_CURVE('',#481100,#481081,#481109,.T.); +#481109 = LINE('',#481110,#481111); +#481110 = CARTESIAN_POINT('',(148.163641,-114.18,-7.5E-02)); +#481111 = VECTOR('',#481112,1.); +#481112 = DIRECTION('',(-1.,0.,0.)); +#481113 = PLANE('',#481114); +#481114 = AXIS2_PLACEMENT_3D('',#481115,#481116,#481117); +#481115 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481116 = DIRECTION('',(-0.,-0.,-1.)); +#481117 = DIRECTION('',(-1.,0.,0.)); +#481118 = SHELL_BASED_SURFACE_MODEL('',(#481119)); +#481119 = OPEN_SHELL('',(#481120)); +#481120 = ADVANCED_FACE('',(#481121),#481165,.T.); +#481121 = FACE_BOUND('',#481122,.T.); +#481122 = EDGE_LOOP('',(#481123,#481134,#481142,#481151,#481159)); +#481123 = ORIENTED_EDGE('',*,*,#481124,.T.); +#481124 = EDGE_CURVE('',#481125,#481127,#481129,.T.); +#481125 = VERTEX_POINT('',#481126); +#481126 = CARTESIAN_POINT('',(122.089567,-113.073398,-7.5E-02)); +#481127 = VERTEX_POINT('',#481128); +#481128 = CARTESIAN_POINT('',(122.205,-113.096359,-7.5E-02)); +#481129 = CIRCLE('',#481130,6.000007318647E-02); +#481130 = AXIS2_PLACEMENT_3D('',#481131,#481132,#481133); +#481131 = CARTESIAN_POINT('',(122.14499992681,-113.0963588233,-7.5E-02) + ); +#481132 = DIRECTION('',(0.,0.,-1.)); +#481133 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481134 = ORIENTED_EDGE('',*,*,#481135,.T.); +#481135 = EDGE_CURVE('',#481127,#481136,#481138,.T.); +#481136 = VERTEX_POINT('',#481137); +#481137 = CARTESIAN_POINT('',(122.205,-113.403641,-7.5E-02)); +#481138 = LINE('',#481139,#481140); +#481139 = CARTESIAN_POINT('',(122.205,-113.096359,-7.5E-02)); +#481140 = VECTOR('',#481141,1.); +#481141 = DIRECTION('',(0.,-1.,0.)); +#481142 = ORIENTED_EDGE('',*,*,#481143,.T.); +#481143 = EDGE_CURVE('',#481136,#481144,#481146,.T.); +#481144 = VERTEX_POINT('',#481145); +#481145 = CARTESIAN_POINT('',(122.085,-113.403641,-7.5E-02)); +#481146 = CIRCLE('',#481147,6.000000000043E-02); +#481147 = AXIS2_PLACEMENT_3D('',#481148,#481149,#481150); +#481148 = CARTESIAN_POINT('',(122.145,-113.4036412255,-7.5E-02)); +#481149 = DIRECTION('',(0.,0.,-1.)); +#481150 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#481151 = ORIENTED_EDGE('',*,*,#481152,.T.); +#481152 = EDGE_CURVE('',#481144,#481153,#481155,.T.); +#481153 = VERTEX_POINT('',#481154); +#481154 = CARTESIAN_POINT('',(122.085,-113.096359,-7.5E-02)); +#481155 = LINE('',#481156,#481157); +#481156 = CARTESIAN_POINT('',(122.085,-113.403641,-7.5E-02)); +#481157 = VECTOR('',#481158,1.); +#481158 = DIRECTION('',(0.,1.,0.)); +#481159 = ORIENTED_EDGE('',*,*,#481160,.T.); +#481160 = EDGE_CURVE('',#481153,#481125,#481161,.T.); +#481161 = LINE('',#481162,#481163); +#481162 = CARTESIAN_POINT('',(122.085,-113.096359,-7.5E-02)); +#481163 = VECTOR('',#481164,1.); +#481164 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481165 = PLANE('',#481166); +#481166 = AXIS2_PLACEMENT_3D('',#481167,#481168,#481169); +#481167 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481168 = DIRECTION('',(-0.,-0.,-1.)); +#481169 = DIRECTION('',(-1.,0.,0.)); +#481170 = SHELL_BASED_SURFACE_MODEL('',(#481171)); +#481171 = OPEN_SHELL('',(#481172)); +#481172 = ADVANCED_FACE('',(#481173),#481217,.T.); +#481173 = FACE_BOUND('',#481174,.T.); +#481174 = EDGE_LOOP('',(#481175,#481186,#481194,#481203,#481211)); +#481175 = ORIENTED_EDGE('',*,*,#481176,.T.); +#481176 = EDGE_CURVE('',#481177,#481179,#481181,.T.); +#481177 = VERTEX_POINT('',#481178); +#481178 = CARTESIAN_POINT('',(122.849567,-113.073398,-7.5E-02)); +#481179 = VERTEX_POINT('',#481180); +#481180 = CARTESIAN_POINT('',(122.965,-113.096359,-7.5E-02)); +#481181 = CIRCLE('',#481182,6.000007318648E-02); +#481182 = AXIS2_PLACEMENT_3D('',#481183,#481184,#481185); +#481183 = CARTESIAN_POINT('',(122.90499992681,-113.0963588233,-7.5E-02) + ); +#481184 = DIRECTION('',(0.,0.,-1.)); +#481185 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481186 = ORIENTED_EDGE('',*,*,#481187,.T.); +#481187 = EDGE_CURVE('',#481179,#481188,#481190,.T.); +#481188 = VERTEX_POINT('',#481189); +#481189 = CARTESIAN_POINT('',(122.965,-113.403641,-7.5E-02)); +#481190 = LINE('',#481191,#481192); +#481191 = CARTESIAN_POINT('',(122.965,-113.096359,-7.5E-02)); +#481192 = VECTOR('',#481193,1.); +#481193 = DIRECTION('',(0.,-1.,0.)); +#481194 = ORIENTED_EDGE('',*,*,#481195,.T.); +#481195 = EDGE_CURVE('',#481188,#481196,#481198,.T.); +#481196 = VERTEX_POINT('',#481197); +#481197 = CARTESIAN_POINT('',(122.845,-113.403641,-7.5E-02)); +#481198 = CIRCLE('',#481199,6.000000000043E-02); +#481199 = AXIS2_PLACEMENT_3D('',#481200,#481201,#481202); +#481200 = CARTESIAN_POINT('',(122.905,-113.4036412255,-7.5E-02)); +#481201 = DIRECTION('',(0.,0.,-1.)); +#481202 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#481203 = ORIENTED_EDGE('',*,*,#481204,.T.); +#481204 = EDGE_CURVE('',#481196,#481205,#481207,.T.); +#481205 = VERTEX_POINT('',#481206); +#481206 = CARTESIAN_POINT('',(122.845,-113.096359,-7.5E-02)); +#481207 = LINE('',#481208,#481209); +#481208 = CARTESIAN_POINT('',(122.845,-113.403641,-7.5E-02)); +#481209 = VECTOR('',#481210,1.); +#481210 = DIRECTION('',(0.,1.,0.)); +#481211 = ORIENTED_EDGE('',*,*,#481212,.T.); +#481212 = EDGE_CURVE('',#481205,#481177,#481213,.T.); +#481213 = LINE('',#481214,#481215); +#481214 = CARTESIAN_POINT('',(122.845,-113.096359,-7.5E-02)); +#481215 = VECTOR('',#481216,1.); +#481216 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481217 = PLANE('',#481218); +#481218 = AXIS2_PLACEMENT_3D('',#481219,#481220,#481221); +#481219 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481220 = DIRECTION('',(-0.,-0.,-1.)); +#481221 = DIRECTION('',(-1.,0.,0.)); +#481222 = SHELL_BASED_SURFACE_MODEL('',(#481223)); +#481223 = OPEN_SHELL('',(#481224)); +#481224 = ADVANCED_FACE('',(#481225),#481294,.T.); +#481225 = FACE_BOUND('',#481226,.T.); +#481226 = EDGE_LOOP('',(#481227,#481238,#481246,#481254,#481263,#481271, + #481280,#481288)); +#481227 = ORIENTED_EDGE('',*,*,#481228,.T.); +#481228 = EDGE_CURVE('',#481229,#481231,#481233,.T.); +#481229 = VERTEX_POINT('',#481230); +#481230 = CARTESIAN_POINT('',(124.084567,-111.062039,-7.5E-02)); +#481231 = VERTEX_POINT('',#481232); +#481232 = CARTESIAN_POINT('',(124.2,-111.085,-7.5E-02)); +#481233 = CIRCLE('',#481234,6.000007318647E-02); +#481234 = AXIS2_PLACEMENT_3D('',#481235,#481236,#481237); +#481235 = CARTESIAN_POINT('',(124.13999992681,-111.0849998233,-7.5E-02) + ); +#481236 = DIRECTION('',(0.,0.,-1.)); +#481237 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481238 = ORIENTED_EDGE('',*,*,#481239,.T.); +#481239 = EDGE_CURVE('',#481231,#481240,#481242,.T.); +#481240 = VERTEX_POINT('',#481241); +#481241 = CARTESIAN_POINT('',(124.2,-112.05,-7.5E-02)); +#481242 = LINE('',#481243,#481244); +#481243 = CARTESIAN_POINT('',(124.2,-111.085,-7.5E-02)); +#481244 = VECTOR('',#481245,1.); +#481245 = DIRECTION('',(0.,-1.,0.)); +#481246 = ORIENTED_EDGE('',*,*,#481247,.T.); +#481247 = EDGE_CURVE('',#481240,#481248,#481250,.T.); +#481248 = VERTEX_POINT('',#481249); +#481249 = CARTESIAN_POINT('',(125.165,-112.05,-7.5E-02)); +#481250 = LINE('',#481251,#481252); +#481251 = CARTESIAN_POINT('',(124.2,-112.05,-7.5E-02)); +#481252 = VECTOR('',#481253,1.); +#481253 = DIRECTION('',(1.,0.,0.)); +#481254 = ORIENTED_EDGE('',*,*,#481255,.T.); +#481255 = EDGE_CURVE('',#481248,#481256,#481258,.T.); +#481256 = VERTEX_POINT('',#481257); +#481257 = CARTESIAN_POINT('',(125.165,-112.17,-7.5E-02)); +#481258 = CIRCLE('',#481259,6.000000000043E-02); +#481259 = AXIS2_PLACEMENT_3D('',#481260,#481261,#481262); +#481260 = CARTESIAN_POINT('',(125.16500022558,-112.11,-7.5E-02)); +#481261 = DIRECTION('',(0.,0.,-1.)); +#481262 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#481263 = ORIENTED_EDGE('',*,*,#481264,.T.); +#481264 = EDGE_CURVE('',#481256,#481265,#481267,.T.); +#481265 = VERTEX_POINT('',#481266); +#481266 = CARTESIAN_POINT('',(124.14,-112.17,-7.5E-02)); +#481267 = LINE('',#481268,#481269); +#481268 = CARTESIAN_POINT('',(125.165,-112.17,-7.5E-02)); +#481269 = VECTOR('',#481270,1.); +#481270 = DIRECTION('',(-1.,0.,0.)); +#481271 = ORIENTED_EDGE('',*,*,#481272,.T.); +#481272 = EDGE_CURVE('',#481265,#481273,#481275,.T.); +#481273 = VERTEX_POINT('',#481274); +#481274 = CARTESIAN_POINT('',(124.08,-112.11,-7.5E-02)); +#481275 = CIRCLE('',#481276,5.999932016264E-02); +#481276 = AXIS2_PLACEMENT_3D('',#481277,#481278,#481279); +#481277 = CARTESIAN_POINT('',(124.13999932015,-112.1100006798,-7.5E-02) + ); +#481278 = DIRECTION('',(0.,0.,-1.)); +#481279 = DIRECTION('',(1.133081517402E-05,-0.999999999936,0.)); +#481280 = ORIENTED_EDGE('',*,*,#481281,.T.); +#481281 = EDGE_CURVE('',#481273,#481282,#481284,.T.); +#481282 = VERTEX_POINT('',#481283); +#481283 = CARTESIAN_POINT('',(124.08,-111.085,-7.5E-02)); +#481284 = LINE('',#481285,#481286); +#481285 = CARTESIAN_POINT('',(124.08,-112.11,-7.5E-02)); +#481286 = VECTOR('',#481287,1.); +#481287 = DIRECTION('',(0.,1.,0.)); +#481288 = ORIENTED_EDGE('',*,*,#481289,.T.); +#481289 = EDGE_CURVE('',#481282,#481229,#481290,.T.); +#481290 = LINE('',#481291,#481292); +#481291 = CARTESIAN_POINT('',(124.08,-111.085,-7.5E-02)); +#481292 = VECTOR('',#481293,1.); +#481293 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481294 = PLANE('',#481295); +#481295 = AXIS2_PLACEMENT_3D('',#481296,#481297,#481298); +#481296 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481297 = DIRECTION('',(-0.,-0.,-1.)); +#481298 = DIRECTION('',(-1.,0.,0.)); +#481299 = SHELL_BASED_SURFACE_MODEL('',(#481300)); +#481300 = OPEN_SHELL('',(#481301)); +#481301 = ADVANCED_FACE('',(#481302),#481371,.T.); +#481302 = FACE_BOUND('',#481303,.T.); +#481303 = EDGE_LOOP('',(#481304,#481315,#481323,#481332,#481340,#481349, + #481357,#481365)); +#481304 = ORIENTED_EDGE('',*,*,#481305,.T.); +#481305 = EDGE_CURVE('',#481306,#481308,#481310,.T.); +#481306 = VERTEX_POINT('',#481307); +#481307 = CARTESIAN_POINT('',(128.854567,-111.062039,-7.5E-02)); +#481308 = VERTEX_POINT('',#481309); +#481309 = CARTESIAN_POINT('',(128.97,-111.085,-7.5E-02)); +#481310 = CIRCLE('',#481311,6.000007318647E-02); +#481311 = AXIS2_PLACEMENT_3D('',#481312,#481313,#481314); +#481312 = CARTESIAN_POINT('',(128.90999992681,-111.0849998233,-7.5E-02) + ); +#481313 = DIRECTION('',(0.,0.,-1.)); +#481314 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481315 = ORIENTED_EDGE('',*,*,#481316,.T.); +#481316 = EDGE_CURVE('',#481308,#481317,#481319,.T.); +#481317 = VERTEX_POINT('',#481318); +#481318 = CARTESIAN_POINT('',(128.97,-112.11,-7.5E-02)); +#481319 = LINE('',#481320,#481321); +#481320 = CARTESIAN_POINT('',(128.97,-111.085,-7.5E-02)); +#481321 = VECTOR('',#481322,1.); +#481322 = DIRECTION('',(0.,-1.,0.)); +#481323 = ORIENTED_EDGE('',*,*,#481324,.T.); +#481324 = EDGE_CURVE('',#481317,#481325,#481327,.T.); +#481325 = VERTEX_POINT('',#481326); +#481326 = CARTESIAN_POINT('',(128.91,-112.17,-7.5E-02)); +#481327 = CIRCLE('',#481328,5.999932016265E-02); +#481328 = AXIS2_PLACEMENT_3D('',#481329,#481330,#481331); +#481329 = CARTESIAN_POINT('',(128.91000067984,-112.1100006798,-7.5E-02) + ); +#481330 = DIRECTION('',(0.,0.,-1.)); +#481331 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#481332 = ORIENTED_EDGE('',*,*,#481333,.T.); +#481333 = EDGE_CURVE('',#481325,#481334,#481336,.T.); +#481334 = VERTEX_POINT('',#481335); +#481335 = CARTESIAN_POINT('',(127.885,-112.17,-7.5E-02)); +#481336 = LINE('',#481337,#481338); +#481337 = CARTESIAN_POINT('',(128.91,-112.17,-7.5E-02)); +#481338 = VECTOR('',#481339,1.); +#481339 = DIRECTION('',(-1.,0.,0.)); +#481340 = ORIENTED_EDGE('',*,*,#481341,.T.); +#481341 = EDGE_CURVE('',#481334,#481342,#481344,.T.); +#481342 = VERTEX_POINT('',#481343); +#481343 = CARTESIAN_POINT('',(127.885,-112.05,-7.5E-02)); +#481344 = CIRCLE('',#481345,6.000000000043E-02); +#481345 = AXIS2_PLACEMENT_3D('',#481346,#481347,#481348); +#481346 = CARTESIAN_POINT('',(127.88499977441,-112.11,-7.5E-02)); +#481347 = DIRECTION('',(0.,0.,-1.)); +#481348 = DIRECTION('',(3.759794253683E-06,-0.999999999993,0.)); +#481349 = ORIENTED_EDGE('',*,*,#481350,.T.); +#481350 = EDGE_CURVE('',#481342,#481351,#481353,.T.); +#481351 = VERTEX_POINT('',#481352); +#481352 = CARTESIAN_POINT('',(128.85,-112.05,-7.5E-02)); +#481353 = LINE('',#481354,#481355); +#481354 = CARTESIAN_POINT('',(127.885,-112.05,-7.5E-02)); +#481355 = VECTOR('',#481356,1.); +#481356 = DIRECTION('',(1.,0.,0.)); +#481357 = ORIENTED_EDGE('',*,*,#481358,.T.); +#481358 = EDGE_CURVE('',#481351,#481359,#481361,.T.); +#481359 = VERTEX_POINT('',#481360); +#481360 = CARTESIAN_POINT('',(128.85,-111.085,-7.5E-02)); +#481361 = LINE('',#481362,#481363); +#481362 = CARTESIAN_POINT('',(128.85,-112.05,-7.5E-02)); +#481363 = VECTOR('',#481364,1.); +#481364 = DIRECTION('',(0.,1.,0.)); +#481365 = ORIENTED_EDGE('',*,*,#481366,.T.); +#481366 = EDGE_CURVE('',#481359,#481306,#481367,.T.); +#481367 = LINE('',#481368,#481369); +#481368 = CARTESIAN_POINT('',(128.85,-111.085,-7.5E-02)); +#481369 = VECTOR('',#481370,1.); +#481370 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481371 = PLANE('',#481372); +#481372 = AXIS2_PLACEMENT_3D('',#481373,#481374,#481375); +#481373 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481374 = DIRECTION('',(-0.,-0.,-1.)); +#481375 = DIRECTION('',(-1.,0.,0.)); +#481376 = SHELL_BASED_SURFACE_MODEL('',(#481377)); +#481377 = OPEN_SHELL('',(#481378)); +#481378 = ADVANCED_FACE('',(#481379),#481439,.T.); +#481379 = FACE_BOUND('',#481380,.T.); +#481380 = EDGE_LOOP('',(#481381,#481391,#481400,#481408,#481417,#481425, + #481433)); +#481381 = ORIENTED_EDGE('',*,*,#481382,.T.); +#481382 = EDGE_CURVE('',#481383,#481385,#481387,.T.); +#481383 = VERTEX_POINT('',#481384); +#481384 = CARTESIAN_POINT('',(132.936476,-110.27721,-7.5E-02)); +#481385 = VERTEX_POINT('',#481386); +#481386 = CARTESIAN_POINT('',(133.27971,-110.023976,-7.5E-02)); +#481387 = LINE('',#481388,#481389); +#481388 = CARTESIAN_POINT('',(132.936476,-110.27721,-7.5E-02)); +#481389 = VECTOR('',#481390,1.); +#481390 = DIRECTION('',(0.804692108267,0.593692353743,0.)); +#481391 = ORIENTED_EDGE('',*,*,#481392,.T.); +#481392 = EDGE_CURVE('',#481385,#481393,#481395,.T.); +#481393 = VERTEX_POINT('',#481394); +#481394 = CARTESIAN_POINT('',(133.375,-110.0725,-7.5E-02)); +#481395 = CIRCLE('',#481396,6.000008802101E-02); +#481396 = AXIS2_PLACEMENT_3D('',#481397,#481398,#481399); +#481397 = CARTESIAN_POINT('',(133.31499991198,-110.0725005574,-7.5E-02) + ); +#481398 = DIRECTION('',(0.,0.,-1.)); +#481399 = DIRECTION('',(-0.588164336846,0.808741437582,0.)); +#481400 = ORIENTED_EDGE('',*,*,#481401,.T.); +#481401 = EDGE_CURVE('',#481393,#481402,#481404,.T.); +#481402 = VERTEX_POINT('',#481403); +#481403 = CARTESIAN_POINT('',(133.375,-110.5525,-7.5E-02)); +#481404 = LINE('',#481405,#481406); +#481405 = CARTESIAN_POINT('',(133.375,-110.0725,-7.5E-02)); +#481406 = VECTOR('',#481407,1.); +#481407 = DIRECTION('',(0.,-1.,0.)); +#481408 = ORIENTED_EDGE('',*,*,#481409,.T.); +#481409 = EDGE_CURVE('',#481402,#481410,#481412,.T.); +#481410 = VERTEX_POINT('',#481411); +#481411 = CARTESIAN_POINT('',(133.27971,-110.601024,-7.5E-02)); +#481412 = CIRCLE('',#481413,6.000027696174E-02); +#481413 = AXIS2_PLACEMENT_3D('',#481414,#481415,#481416); +#481414 = CARTESIAN_POINT('',(133.31499972304,-110.5524990715,-7.5E-02) + ); +#481415 = DIRECTION('',(0.,0.,-1.)); +#481416 = DIRECTION('',(0.99999999988,-1.547440135436E-05,0.)); +#481417 = ORIENTED_EDGE('',*,*,#481418,.T.); +#481418 = EDGE_CURVE('',#481410,#481419,#481421,.T.); +#481419 = VERTEX_POINT('',#481420); +#481420 = CARTESIAN_POINT('',(132.94971,-110.361024,-7.5E-02)); +#481421 = LINE('',#481422,#481423); +#481422 = CARTESIAN_POINT('',(133.27971,-110.601024,-7.5E-02)); +#481423 = VECTOR('',#481424,1.); +#481424 = DIRECTION('',(-0.808736084303,0.588171697675,0.)); +#481425 = ORIENTED_EDGE('',*,*,#481426,.T.); +#481426 = EDGE_CURVE('',#481419,#481427,#481429,.T.); +#481427 = VERTEX_POINT('',#481428); +#481428 = CARTESIAN_POINT('',(132.925734,-110.321858,-7.5E-02)); +#481429 = LINE('',#481430,#481431); +#481430 = CARTESIAN_POINT('',(132.94971,-110.361024,-7.5E-02)); +#481431 = VECTOR('',#481432,1.); +#481432 = DIRECTION('',(-0.522103432673,0.852882175679,0.)); +#481433 = ORIENTED_EDGE('',*,*,#481434,.T.); +#481434 = EDGE_CURVE('',#481427,#481383,#481435,.T.); +#481435 = LINE('',#481436,#481437); +#481436 = CARTESIAN_POINT('',(132.925734,-110.321858,-7.5E-02)); +#481437 = VECTOR('',#481438,1.); +#481438 = DIRECTION('',(0.233918140202,0.972256295266,0.)); +#481439 = PLANE('',#481440); +#481440 = AXIS2_PLACEMENT_3D('',#481441,#481442,#481443); +#481441 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481442 = DIRECTION('',(-0.,-0.,-1.)); +#481443 = DIRECTION('',(-1.,0.,0.)); +#481444 = SHELL_BASED_SURFACE_MODEL('',(#481445)); +#481445 = OPEN_SHELL('',(#481446)); +#481446 = ADVANCED_FACE('',(#481447),#481491,.T.); +#481447 = FACE_BOUND('',#481448,.T.); +#481448 = EDGE_LOOP('',(#481449,#481460,#481468,#481477,#481485)); +#481449 = ORIENTED_EDGE('',*,*,#481450,.T.); +#481450 = EDGE_CURVE('',#481451,#481453,#481455,.T.); +#481451 = VERTEX_POINT('',#481452); +#481452 = CARTESIAN_POINT('',(121.234567,-109.715787,-7.5E-02)); +#481453 = VERTEX_POINT('',#481454); +#481454 = CARTESIAN_POINT('',(121.35,-109.738748,-7.5E-02)); +#481455 = CIRCLE('',#481456,6.000007318646E-02); +#481456 = AXIS2_PLACEMENT_3D('',#481457,#481458,#481459); +#481457 = CARTESIAN_POINT('',(121.28999992681,-109.7387478233,-7.5E-02) + ); +#481458 = DIRECTION('',(0.,0.,-1.)); +#481459 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481460 = ORIENTED_EDGE('',*,*,#481461,.T.); +#481461 = EDGE_CURVE('',#481453,#481462,#481464,.T.); +#481462 = VERTEX_POINT('',#481463); +#481463 = CARTESIAN_POINT('',(121.35,-110.261252,-7.5E-02)); +#481464 = LINE('',#481465,#481466); +#481465 = CARTESIAN_POINT('',(121.35,-109.738748,-7.5E-02)); +#481466 = VECTOR('',#481467,1.); +#481467 = DIRECTION('',(0.,-1.,0.)); +#481468 = ORIENTED_EDGE('',*,*,#481469,.T.); +#481469 = EDGE_CURVE('',#481462,#481470,#481472,.T.); +#481470 = VERTEX_POINT('',#481471); +#481471 = CARTESIAN_POINT('',(121.23,-110.261252,-7.5E-02)); +#481472 = CIRCLE('',#481473,6.000000000042E-02); +#481473 = AXIS2_PLACEMENT_3D('',#481474,#481475,#481476); +#481474 = CARTESIAN_POINT('',(121.29,-110.2612522255,-7.5E-02)); +#481475 = DIRECTION('',(0.,0.,-1.)); +#481476 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#481477 = ORIENTED_EDGE('',*,*,#481478,.T.); +#481478 = EDGE_CURVE('',#481470,#481479,#481481,.T.); +#481479 = VERTEX_POINT('',#481480); +#481480 = CARTESIAN_POINT('',(121.23,-109.738748,-7.5E-02)); +#481481 = LINE('',#481482,#481483); +#481482 = CARTESIAN_POINT('',(121.23,-110.261252,-7.5E-02)); +#481483 = VECTOR('',#481484,1.); +#481484 = DIRECTION('',(0.,1.,0.)); +#481485 = ORIENTED_EDGE('',*,*,#481486,.T.); +#481486 = EDGE_CURVE('',#481479,#481451,#481487,.T.); +#481487 = LINE('',#481488,#481489); +#481488 = CARTESIAN_POINT('',(121.23,-109.738748,-7.5E-02)); +#481489 = VECTOR('',#481490,1.); +#481490 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481491 = PLANE('',#481492); +#481492 = AXIS2_PLACEMENT_3D('',#481493,#481494,#481495); +#481493 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481494 = DIRECTION('',(-0.,-0.,-1.)); +#481495 = DIRECTION('',(-1.,0.,0.)); +#481496 = SHELL_BASED_SURFACE_MODEL('',(#481497)); +#481497 = OPEN_SHELL('',(#481498)); +#481498 = ADVANCED_FACE('',(#481499),#481543,.T.); +#481499 = FACE_BOUND('',#481500,.T.); +#481500 = EDGE_LOOP('',(#481501,#481512,#481520,#481529,#481537)); +#481501 = ORIENTED_EDGE('',*,*,#481502,.T.); +#481502 = EDGE_CURVE('',#481503,#481505,#481507,.T.); +#481503 = VERTEX_POINT('',#481504); +#481504 = CARTESIAN_POINT('',(122.704567,-109.715787,-7.5E-02)); +#481505 = VERTEX_POINT('',#481506); +#481506 = CARTESIAN_POINT('',(122.82,-109.738748,-7.5E-02)); +#481507 = CIRCLE('',#481508,6.000007318646E-02); +#481508 = AXIS2_PLACEMENT_3D('',#481509,#481510,#481511); +#481509 = CARTESIAN_POINT('',(122.75999992681,-109.7387478233,-7.5E-02) + ); +#481510 = DIRECTION('',(0.,0.,-1.)); +#481511 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#481512 = ORIENTED_EDGE('',*,*,#481513,.T.); +#481513 = EDGE_CURVE('',#481505,#481514,#481516,.T.); +#481514 = VERTEX_POINT('',#481515); +#481515 = CARTESIAN_POINT('',(122.82,-110.261252,-7.5E-02)); +#481516 = LINE('',#481517,#481518); +#481517 = CARTESIAN_POINT('',(122.82,-109.738748,-7.5E-02)); +#481518 = VECTOR('',#481519,1.); +#481519 = DIRECTION('',(0.,-1.,0.)); +#481520 = ORIENTED_EDGE('',*,*,#481521,.T.); +#481521 = EDGE_CURVE('',#481514,#481522,#481524,.T.); +#481522 = VERTEX_POINT('',#481523); +#481523 = CARTESIAN_POINT('',(122.7,-110.261252,-7.5E-02)); +#481524 = CIRCLE('',#481525,6.000000000042E-02); +#481525 = AXIS2_PLACEMENT_3D('',#481526,#481527,#481528); +#481526 = CARTESIAN_POINT('',(122.76,-110.2612522255,-7.5E-02)); +#481527 = DIRECTION('',(0.,0.,-1.)); +#481528 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#481529 = ORIENTED_EDGE('',*,*,#481530,.T.); +#481530 = EDGE_CURVE('',#481522,#481531,#481533,.T.); +#481531 = VERTEX_POINT('',#481532); +#481532 = CARTESIAN_POINT('',(122.7,-109.738748,-7.5E-02)); +#481533 = LINE('',#481534,#481535); +#481534 = CARTESIAN_POINT('',(122.7,-110.261252,-7.5E-02)); +#481535 = VECTOR('',#481536,1.); +#481536 = DIRECTION('',(0.,1.,0.)); +#481537 = ORIENTED_EDGE('',*,*,#481538,.T.); +#481538 = EDGE_CURVE('',#481531,#481503,#481539,.T.); +#481539 = LINE('',#481540,#481541); +#481540 = CARTESIAN_POINT('',(122.7,-109.738748,-7.5E-02)); +#481541 = VECTOR('',#481542,1.); +#481542 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481543 = PLANE('',#481544); +#481544 = AXIS2_PLACEMENT_3D('',#481545,#481546,#481547); +#481545 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481546 = DIRECTION('',(-0.,-0.,-1.)); +#481547 = DIRECTION('',(-1.,0.,0.)); +#481548 = SHELL_BASED_SURFACE_MODEL('',(#481549)); +#481549 = OPEN_SHELL('',(#481550)); +#481550 = ADVANCED_FACE('',(#481551),#481660,.T.); +#481551 = FACE_BOUND('',#481552,.T.); +#481552 = EDGE_LOOP('',(#481553,#481564,#481572,#481580,#481588,#481596, + #481604,#481612,#481621,#481629,#481638,#481646,#481654)); +#481553 = ORIENTED_EDGE('',*,*,#481554,.T.); +#481554 = EDGE_CURVE('',#481555,#481557,#481559,.T.); +#481555 = VERTEX_POINT('',#481556); +#481556 = CARTESIAN_POINT('',(129.892039,-107.897067,-7.5E-02)); +#481557 = VERTEX_POINT('',#481558); +#481558 = CARTESIAN_POINT('',(129.987961,-107.897067,-7.5E-02)); +#481559 = CIRCLE('',#481560,0.187367801311); +#481560 = AXIS2_PLACEMENT_3D('',#481561,#481562,#481563); +#481561 = CARTESIAN_POINT('',(129.94,-108.0781924687,-7.5E-02)); +#481562 = DIRECTION('',(0.,0.,-1.)); +#481563 = DIRECTION('',(-0.25597247587,0.96668407021,0.)); +#481564 = ORIENTED_EDGE('',*,*,#481565,.T.); +#481565 = EDGE_CURVE('',#481557,#481566,#481568,.T.); +#481566 = VERTEX_POINT('',#481567); +#481567 = CARTESIAN_POINT('',(130.020433,-107.929539,-7.5E-02)); +#481568 = LINE('',#481569,#481570); +#481569 = CARTESIAN_POINT('',(129.987961,-107.897067,-7.5E-02)); +#481570 = VECTOR('',#481571,1.); +#481571 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#481572 = ORIENTED_EDGE('',*,*,#481573,.T.); +#481573 = EDGE_CURVE('',#481566,#481574,#481576,.T.); +#481574 = VERTEX_POINT('',#481575); +#481575 = CARTESIAN_POINT('',(130.020433,-107.975461,-7.5E-02)); +#481576 = LINE('',#481577,#481578); +#481577 = CARTESIAN_POINT('',(130.020433,-107.929539,-7.5E-02)); +#481578 = VECTOR('',#481579,1.); +#481579 = DIRECTION('',(0.,-1.,0.)); +#481580 = ORIENTED_EDGE('',*,*,#481581,.T.); +#481581 = EDGE_CURVE('',#481574,#481582,#481584,.T.); +#481582 = VERTEX_POINT('',#481583); +#481583 = CARTESIAN_POINT('',(129.987961,-108.007933,-7.5E-02)); +#481584 = LINE('',#481585,#481586); +#481585 = CARTESIAN_POINT('',(130.020433,-107.975461,-7.5E-02)); +#481586 = VECTOR('',#481587,1.); +#481587 = DIRECTION('',(-0.707106781186,-0.707106781187,0.)); +#481588 = ORIENTED_EDGE('',*,*,#481589,.T.); +#481589 = EDGE_CURVE('',#481582,#481590,#481592,.T.); +#481590 = VERTEX_POINT('',#481591); +#481591 = CARTESIAN_POINT('',(129.975,-108.01051,-7.5E-02)); +#481592 = LINE('',#481593,#481594); +#481593 = CARTESIAN_POINT('',(129.987961,-108.007933,-7.5E-02)); +#481594 = VECTOR('',#481595,1.); +#481595 = DIRECTION('',(-0.980801250756,-0.195010016449,0.)); +#481596 = ORIENTED_EDGE('',*,*,#481597,.T.); +#481597 = EDGE_CURVE('',#481590,#481598,#481600,.T.); +#481598 = VERTEX_POINT('',#481599); +#481599 = CARTESIAN_POINT('',(129.975,-109.714489,-7.5E-02)); +#481600 = LINE('',#481601,#481602); +#481601 = CARTESIAN_POINT('',(129.975,-108.01051,-7.5E-02)); +#481602 = VECTOR('',#481603,1.); +#481603 = DIRECTION('',(0.,-1.,0.)); +#481604 = ORIENTED_EDGE('',*,*,#481605,.T.); +#481605 = EDGE_CURVE('',#481598,#481606,#481608,.T.); +#481606 = VERTEX_POINT('',#481607); +#481607 = CARTESIAN_POINT('',(129.987961,-109.717067,-7.5E-02)); +#481608 = LINE('',#481609,#481610); +#481609 = CARTESIAN_POINT('',(129.975,-109.714489,-7.5E-02)); +#481610 = VECTOR('',#481611,1.); +#481611 = DIRECTION('',(0.980786774539,-0.195082810336,0.)); +#481612 = ORIENTED_EDGE('',*,*,#481613,.T.); +#481613 = EDGE_CURVE('',#481606,#481614,#481616,.T.); +#481614 = VERTEX_POINT('',#481615); +#481615 = CARTESIAN_POINT('',(129.965,-109.8325,-7.5E-02)); +#481616 = CIRCLE('',#481617,6.000007318647E-02); +#481617 = AXIS2_PLACEMENT_3D('',#481618,#481619,#481620); +#481618 = CARTESIAN_POINT('',(129.96500017668,-109.7724999268,-7.5E-02) + ); +#481619 = DIRECTION('',(0.,0.,-1.)); +#481620 = DIRECTION('',(0.382679921777,0.923880986636,0.)); +#481621 = ORIENTED_EDGE('',*,*,#481622,.T.); +#481622 = EDGE_CURVE('',#481614,#481623,#481625,.T.); +#481623 = VERTEX_POINT('',#481624); +#481624 = CARTESIAN_POINT('',(129.915,-109.8325,-7.5E-02)); +#481625 = LINE('',#481626,#481627); +#481626 = CARTESIAN_POINT('',(129.965,-109.8325,-7.5E-02)); +#481627 = VECTOR('',#481628,1.); +#481628 = DIRECTION('',(-1.,0.,0.)); +#481629 = ORIENTED_EDGE('',*,*,#481630,.T.); +#481630 = EDGE_CURVE('',#481623,#481631,#481633,.T.); +#481631 = VERTEX_POINT('',#481632); +#481632 = CARTESIAN_POINT('',(129.855,-109.7725,-7.5E-02)); +#481633 = CIRCLE('',#481634,5.999932016262E-02); +#481634 = AXIS2_PLACEMENT_3D('',#481635,#481636,#481637); +#481635 = CARTESIAN_POINT('',(129.91499932015,-109.7725006798,-7.5E-02) + ); +#481636 = DIRECTION('',(0.,0.,-1.)); +#481637 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#481638 = ORIENTED_EDGE('',*,*,#481639,.T.); +#481639 = EDGE_CURVE('',#481631,#481640,#481642,.T.); +#481640 = VERTEX_POINT('',#481641); +#481641 = CARTESIAN_POINT('',(129.855,-107.9525,-7.5E-02)); +#481642 = LINE('',#481643,#481644); +#481643 = CARTESIAN_POINT('',(129.855,-109.7725,-7.5E-02)); +#481644 = VECTOR('',#481645,1.); +#481645 = DIRECTION('',(0.,1.,0.)); +#481646 = ORIENTED_EDGE('',*,*,#481647,.T.); +#481647 = EDGE_CURVE('',#481640,#481648,#481650,.T.); +#481648 = VERTEX_POINT('',#481649); +#481649 = CARTESIAN_POINT('',(129.859567,-107.929539,-7.5E-02)); +#481650 = LINE('',#481651,#481652); +#481651 = CARTESIAN_POINT('',(129.855,-107.9525,-7.5E-02)); +#481652 = VECTOR('',#481653,1.); +#481653 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#481654 = ORIENTED_EDGE('',*,*,#481655,.T.); +#481655 = EDGE_CURVE('',#481648,#481555,#481656,.T.); +#481656 = LINE('',#481657,#481658); +#481657 = CARTESIAN_POINT('',(129.859567,-107.929539,-7.5E-02)); +#481658 = VECTOR('',#481659,1.); +#481659 = DIRECTION('',(0.707106781187,0.707106781186,0.)); +#481660 = PLANE('',#481661); +#481661 = AXIS2_PLACEMENT_3D('',#481662,#481663,#481664); +#481662 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481663 = DIRECTION('',(-0.,-0.,-1.)); +#481664 = DIRECTION('',(-1.,0.,0.)); +#481665 = SHELL_BASED_SURFACE_MODEL('',(#481666)); +#481666 = OPEN_SHELL('',(#481667)); +#481667 = ADVANCED_FACE('',(#481668),#481762,.T.); +#481668 = FACE_BOUND('',#481669,.T.); +#481669 = EDGE_LOOP('',(#481670,#481681,#481689,#481697,#481705,#481714, + #481722,#481731,#481739,#481747,#481755)); +#481670 = ORIENTED_EDGE('',*,*,#481671,.T.); +#481671 = EDGE_CURVE('',#481672,#481674,#481676,.T.); +#481672 = VERTEX_POINT('',#481673); +#481673 = CARTESIAN_POINT('',(132.962039,-107.897067,-7.5E-02)); +#481674 = VERTEX_POINT('',#481675); +#481675 = CARTESIAN_POINT('',(133.057961,-107.897067,-7.5E-02)); +#481676 = CIRCLE('',#481677,0.187367801311); +#481677 = AXIS2_PLACEMENT_3D('',#481678,#481679,#481680); +#481678 = CARTESIAN_POINT('',(133.01,-108.0781924687,-7.5E-02)); +#481679 = DIRECTION('',(0.,0.,-1.)); +#481680 = DIRECTION('',(-0.25597247587,0.96668407021,0.)); +#481681 = ORIENTED_EDGE('',*,*,#481682,.T.); +#481682 = EDGE_CURVE('',#481674,#481683,#481685,.T.); +#481683 = VERTEX_POINT('',#481684); +#481684 = CARTESIAN_POINT('',(133.090433,-107.929539,-7.5E-02)); +#481685 = LINE('',#481686,#481687); +#481686 = CARTESIAN_POINT('',(133.057961,-107.897067,-7.5E-02)); +#481687 = VECTOR('',#481688,1.); +#481688 = DIRECTION('',(0.707106781186,-0.707106781187,0.)); +#481689 = ORIENTED_EDGE('',*,*,#481690,.T.); +#481690 = EDGE_CURVE('',#481683,#481691,#481693,.T.); +#481691 = VERTEX_POINT('',#481692); +#481692 = CARTESIAN_POINT('',(133.095,-107.9525,-7.5E-02)); +#481693 = LINE('',#481694,#481695); +#481694 = CARTESIAN_POINT('',(133.090433,-107.929539,-7.5E-02)); +#481695 = VECTOR('',#481696,1.); +#481696 = DIRECTION('',(0.195081000118,-0.980787134598,0.)); +#481697 = ORIENTED_EDGE('',*,*,#481698,.T.); +#481698 = EDGE_CURVE('',#481691,#481699,#481701,.T.); +#481699 = VERTEX_POINT('',#481700); +#481700 = CARTESIAN_POINT('',(133.095,-109.7725,-7.5E-02)); +#481701 = LINE('',#481702,#481703); +#481702 = CARTESIAN_POINT('',(133.095,-107.9525,-7.5E-02)); +#481703 = VECTOR('',#481704,1.); +#481704 = DIRECTION('',(0.,-1.,0.)); +#481705 = ORIENTED_EDGE('',*,*,#481706,.T.); +#481706 = EDGE_CURVE('',#481699,#481707,#481709,.T.); +#481707 = VERTEX_POINT('',#481708); +#481708 = CARTESIAN_POINT('',(133.035,-109.8325,-7.5E-02)); +#481709 = CIRCLE('',#481710,5.999932016262E-02); +#481710 = AXIS2_PLACEMENT_3D('',#481711,#481712,#481713); +#481711 = CARTESIAN_POINT('',(133.03500067984,-109.7725006798,-7.5E-02) + ); +#481712 = DIRECTION('',(0.,0.,-1.)); +#481713 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#481714 = ORIENTED_EDGE('',*,*,#481715,.T.); +#481715 = EDGE_CURVE('',#481707,#481716,#481718,.T.); +#481716 = VERTEX_POINT('',#481717); +#481717 = CARTESIAN_POINT('',(132.985,-109.8325,-7.5E-02)); +#481718 = LINE('',#481719,#481720); +#481719 = CARTESIAN_POINT('',(133.035,-109.8325,-7.5E-02)); +#481720 = VECTOR('',#481721,1.); +#481721 = DIRECTION('',(-1.,0.,0.)); +#481722 = ORIENTED_EDGE('',*,*,#481723,.T.); +#481723 = EDGE_CURVE('',#481716,#481724,#481726,.T.); +#481724 = VERTEX_POINT('',#481725); +#481725 = CARTESIAN_POINT('',(132.962039,-109.717067,-7.5E-02)); +#481726 = CIRCLE('',#481727,6.000007318647E-02); +#481727 = AXIS2_PLACEMENT_3D('',#481728,#481729,#481730); +#481728 = CARTESIAN_POINT('',(132.98499982331,-109.7724999268,-7.5E-02) + ); +#481729 = DIRECTION('',(0.,0.,-1.)); +#481730 = DIRECTION('',(2.94476972213E-06,-0.999999999996,0.)); +#481731 = ORIENTED_EDGE('',*,*,#481732,.T.); +#481732 = EDGE_CURVE('',#481724,#481733,#481735,.T.); +#481733 = VERTEX_POINT('',#481734); +#481734 = CARTESIAN_POINT('',(132.975,-109.714489,-7.5E-02)); +#481735 = LINE('',#481736,#481737); +#481736 = CARTESIAN_POINT('',(132.962039,-109.717067,-7.5E-02)); +#481737 = VECTOR('',#481738,1.); +#481738 = DIRECTION('',(0.980786774539,0.195082810336,0.)); +#481739 = ORIENTED_EDGE('',*,*,#481740,.T.); +#481740 = EDGE_CURVE('',#481733,#481741,#481743,.T.); +#481741 = VERTEX_POINT('',#481742); +#481742 = CARTESIAN_POINT('',(132.975,-108.01051,-7.5E-02)); +#481743 = LINE('',#481744,#481745); +#481744 = CARTESIAN_POINT('',(132.975,-109.714489,-7.5E-02)); +#481745 = VECTOR('',#481746,1.); +#481746 = DIRECTION('',(0.,1.,0.)); +#481747 = ORIENTED_EDGE('',*,*,#481748,.T.); +#481748 = EDGE_CURVE('',#481741,#481749,#481751,.T.); +#481749 = VERTEX_POINT('',#481750); +#481750 = CARTESIAN_POINT('',(132.962039,-108.007933,-7.5E-02)); +#481751 = LINE('',#481752,#481753); +#481752 = CARTESIAN_POINT('',(132.975,-108.01051,-7.5E-02)); +#481753 = VECTOR('',#481754,1.); +#481754 = DIRECTION('',(-0.980801250756,0.19501001645,0.)); +#481755 = ORIENTED_EDGE('',*,*,#481756,.T.); +#481756 = EDGE_CURVE('',#481749,#481672,#481757,.T.); +#481757 = CIRCLE('',#481758,6.00002084163E-02); +#481758 = AXIS2_PLACEMENT_3D('',#481759,#481760,#481761); +#481759 = CARTESIAN_POINT('',(132.985,-107.9525,-7.5E-02)); +#481760 = DIRECTION('',(0.,0.,-1.)); +#481761 = DIRECTION('',(-0.382682004047,-0.923880124139,-0.)); +#481762 = PLANE('',#481763); +#481763 = AXIS2_PLACEMENT_3D('',#481764,#481765,#481766); +#481764 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481765 = DIRECTION('',(-0.,-0.,-1.)); +#481766 = DIRECTION('',(-1.,0.,0.)); +#481767 = SHELL_BASED_SURFACE_MODEL('',(#481768)); +#481768 = OPEN_SHELL('',(#481769)); +#481769 = ADVANCED_FACE('',(#481770),#481831,.T.); +#481770 = FACE_BOUND('',#481771,.T.); +#481771 = EDGE_LOOP('',(#481772,#481783,#481791,#481800,#481808,#481816, + #481825)); +#481772 = ORIENTED_EDGE('',*,*,#481773,.T.); +#481773 = EDGE_CURVE('',#481774,#481776,#481778,.T.); +#481774 = VERTEX_POINT('',#481775); +#481775 = CARTESIAN_POINT('',(124.08,-107.89,-7.5E-02)); +#481776 = VERTEX_POINT('',#481777); +#481777 = CARTESIAN_POINT('',(124.14,-107.83,-7.5E-02)); +#481778 = CIRCLE('',#481779,5.999932016264E-02); +#481779 = AXIS2_PLACEMENT_3D('',#481780,#481781,#481782); +#481780 = CARTESIAN_POINT('',(124.13999932015,-107.8899993201,-7.5E-02) + ); +#481781 = DIRECTION('',(0.,0.,-1.)); +#481782 = DIRECTION('',(-0.999999999936,-1.133081517402E-05,-0.)); +#481783 = ORIENTED_EDGE('',*,*,#481784,.T.); +#481784 = EDGE_CURVE('',#481776,#481785,#481787,.T.); +#481785 = VERTEX_POINT('',#481786); +#481786 = CARTESIAN_POINT('',(125.165,-107.83,-7.5E-02)); +#481787 = LINE('',#481788,#481789); +#481788 = CARTESIAN_POINT('',(124.14,-107.83,-7.5E-02)); +#481789 = VECTOR('',#481790,1.); +#481790 = DIRECTION('',(1.,0.,0.)); +#481791 = ORIENTED_EDGE('',*,*,#481792,.T.); +#481792 = EDGE_CURVE('',#481785,#481793,#481795,.T.); +#481793 = VERTEX_POINT('',#481794); +#481794 = CARTESIAN_POINT('',(125.165,-107.95,-7.5E-02)); +#481795 = CIRCLE('',#481796,6.000000000043E-02); +#481796 = AXIS2_PLACEMENT_3D('',#481797,#481798,#481799); +#481797 = CARTESIAN_POINT('',(125.16500022558,-107.89,-7.5E-02)); +#481798 = DIRECTION('',(0.,0.,-1.)); +#481799 = DIRECTION('',(-3.759794016835E-06,0.999999999993,-0.)); +#481800 = ORIENTED_EDGE('',*,*,#481801,.T.); +#481801 = EDGE_CURVE('',#481793,#481802,#481804,.T.); +#481802 = VERTEX_POINT('',#481803); +#481803 = CARTESIAN_POINT('',(124.2,-107.95,-7.5E-02)); +#481804 = LINE('',#481805,#481806); +#481805 = CARTESIAN_POINT('',(125.165,-107.95,-7.5E-02)); +#481806 = VECTOR('',#481807,1.); +#481807 = DIRECTION('',(-1.,0.,0.)); +#481808 = ORIENTED_EDGE('',*,*,#481809,.T.); +#481809 = EDGE_CURVE('',#481802,#481810,#481812,.T.); +#481810 = VERTEX_POINT('',#481811); +#481811 = CARTESIAN_POINT('',(124.2,-108.915,-7.5E-02)); +#481812 = LINE('',#481813,#481814); +#481813 = CARTESIAN_POINT('',(124.2,-107.95,-7.5E-02)); +#481814 = VECTOR('',#481815,1.); +#481815 = DIRECTION('',(0.,-1.,0.)); +#481816 = ORIENTED_EDGE('',*,*,#481817,.T.); +#481817 = EDGE_CURVE('',#481810,#481818,#481820,.T.); +#481818 = VERTEX_POINT('',#481819); +#481819 = CARTESIAN_POINT('',(124.08,-108.915,-7.5E-02)); +#481820 = CIRCLE('',#481821,6.000000000043E-02); +#481821 = AXIS2_PLACEMENT_3D('',#481822,#481823,#481824); +#481822 = CARTESIAN_POINT('',(124.14,-108.9150002255,-7.5E-02)); +#481823 = DIRECTION('',(0.,0.,-1.)); +#481824 = DIRECTION('',(0.999999999993,3.759794016835E-06,0.)); +#481825 = ORIENTED_EDGE('',*,*,#481826,.T.); +#481826 = EDGE_CURVE('',#481818,#481774,#481827,.T.); +#481827 = LINE('',#481828,#481829); +#481828 = CARTESIAN_POINT('',(124.08,-108.915,-7.5E-02)); +#481829 = VECTOR('',#481830,1.); +#481830 = DIRECTION('',(0.,1.,0.)); +#481831 = PLANE('',#481832); +#481832 = AXIS2_PLACEMENT_3D('',#481833,#481834,#481835); +#481833 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481834 = DIRECTION('',(-0.,-0.,-1.)); +#481835 = DIRECTION('',(-1.,0.,0.)); +#481836 = SHELL_BASED_SURFACE_MODEL('',(#481837)); +#481837 = OPEN_SHELL('',(#481838)); +#481838 = ADVANCED_FACE('',(#481839),#481900,.T.); +#481839 = FACE_BOUND('',#481840,.T.); +#481840 = EDGE_LOOP('',(#481841,#481852,#481860,#481869,#481877,#481886, + #481894)); +#481841 = ORIENTED_EDGE('',*,*,#481842,.T.); +#481842 = EDGE_CURVE('',#481843,#481845,#481847,.T.); +#481843 = VERTEX_POINT('',#481844); +#481844 = CARTESIAN_POINT('',(127.885,-107.95,-7.5E-02)); +#481845 = VERTEX_POINT('',#481846); +#481846 = CARTESIAN_POINT('',(127.885,-107.83,-7.5E-02)); +#481847 = CIRCLE('',#481848,6.000000000043E-02); +#481848 = AXIS2_PLACEMENT_3D('',#481849,#481850,#481851); +#481849 = CARTESIAN_POINT('',(127.88499977441,-107.89,-7.5E-02)); +#481850 = DIRECTION('',(0.,0.,-1.)); +#481851 = DIRECTION('',(3.759794253683E-06,-0.999999999993,0.)); +#481852 = ORIENTED_EDGE('',*,*,#481853,.T.); +#481853 = EDGE_CURVE('',#481845,#481854,#481856,.T.); +#481854 = VERTEX_POINT('',#481855); +#481855 = CARTESIAN_POINT('',(128.91,-107.83,-7.5E-02)); +#481856 = LINE('',#481857,#481858); +#481857 = CARTESIAN_POINT('',(127.885,-107.83,-7.5E-02)); +#481858 = VECTOR('',#481859,1.); +#481859 = DIRECTION('',(1.,0.,0.)); +#481860 = ORIENTED_EDGE('',*,*,#481861,.T.); +#481861 = EDGE_CURVE('',#481854,#481862,#481864,.T.); +#481862 = VERTEX_POINT('',#481863); +#481863 = CARTESIAN_POINT('',(128.97,-107.89,-7.5E-02)); +#481864 = CIRCLE('',#481865,5.999932016262E-02); +#481865 = AXIS2_PLACEMENT_3D('',#481866,#481867,#481868); +#481866 = CARTESIAN_POINT('',(128.91000067984,-107.8899993201,-7.5E-02) + ); +#481867 = DIRECTION('',(0.,0.,-1.)); +#481868 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#481869 = ORIENTED_EDGE('',*,*,#481870,.T.); +#481870 = EDGE_CURVE('',#481862,#481871,#481873,.T.); +#481871 = VERTEX_POINT('',#481872); +#481872 = CARTESIAN_POINT('',(128.97,-108.915,-7.5E-02)); +#481873 = LINE('',#481874,#481875); +#481874 = CARTESIAN_POINT('',(128.97,-107.89,-7.5E-02)); +#481875 = VECTOR('',#481876,1.); +#481876 = DIRECTION('',(0.,-1.,0.)); +#481877 = ORIENTED_EDGE('',*,*,#481878,.T.); +#481878 = EDGE_CURVE('',#481871,#481879,#481881,.T.); +#481879 = VERTEX_POINT('',#481880); +#481880 = CARTESIAN_POINT('',(128.85,-108.915,-7.5E-02)); +#481881 = CIRCLE('',#481882,6.000000000043E-02); +#481882 = AXIS2_PLACEMENT_3D('',#481883,#481884,#481885); +#481883 = CARTESIAN_POINT('',(128.91,-108.9150002255,-7.5E-02)); +#481884 = DIRECTION('',(0.,0.,-1.)); +#481885 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#481886 = ORIENTED_EDGE('',*,*,#481887,.T.); +#481887 = EDGE_CURVE('',#481879,#481888,#481890,.T.); +#481888 = VERTEX_POINT('',#481889); +#481889 = CARTESIAN_POINT('',(128.85,-107.95,-7.5E-02)); +#481890 = LINE('',#481891,#481892); +#481891 = CARTESIAN_POINT('',(128.85,-108.915,-7.5E-02)); +#481892 = VECTOR('',#481893,1.); +#481893 = DIRECTION('',(0.,1.,0.)); +#481894 = ORIENTED_EDGE('',*,*,#481895,.T.); +#481895 = EDGE_CURVE('',#481888,#481843,#481896,.T.); +#481896 = LINE('',#481897,#481898); +#481897 = CARTESIAN_POINT('',(128.85,-107.95,-7.5E-02)); +#481898 = VECTOR('',#481899,1.); +#481899 = DIRECTION('',(-1.,0.,0.)); +#481900 = PLANE('',#481901); +#481901 = AXIS2_PLACEMENT_3D('',#481902,#481903,#481904); +#481902 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481903 = DIRECTION('',(-0.,-0.,-1.)); +#481904 = DIRECTION('',(-1.,0.,0.)); +#481905 = SHELL_BASED_SURFACE_MODEL('',(#481906)); +#481906 = OPEN_SHELL('',(#481907)); +#481907 = ADVANCED_FACE('',(#481908),#481944,.T.); +#481908 = FACE_BOUND('',#481909,.T.); +#481909 = EDGE_LOOP('',(#481910,#481921,#481929,#481938)); +#481910 = ORIENTED_EDGE('',*,*,#481911,.T.); +#481911 = EDGE_CURVE('',#481912,#481914,#481916,.T.); +#481912 = VERTEX_POINT('',#481913); +#481913 = CARTESIAN_POINT('',(131.085,-108.0125,-7.5E-02)); +#481914 = VERTEX_POINT('',#481915); +#481915 = CARTESIAN_POINT('',(131.085,-107.8925,-7.5E-02)); +#481916 = CIRCLE('',#481917,6.000000000042E-02); +#481917 = AXIS2_PLACEMENT_3D('',#481918,#481919,#481920); +#481918 = CARTESIAN_POINT('',(131.08499977441,-107.9525,-7.5E-02)); +#481919 = DIRECTION('',(0.,0.,-1.)); +#481920 = DIRECTION('',(3.759794727378E-06,-0.999999999993,0.)); +#481921 = ORIENTED_EDGE('',*,*,#481922,.T.); +#481922 = EDGE_CURVE('',#481914,#481923,#481925,.T.); +#481923 = VERTEX_POINT('',#481924); +#481924 = CARTESIAN_POINT('',(131.865,-107.8925,-7.5E-02)); +#481925 = LINE('',#481926,#481927); +#481926 = CARTESIAN_POINT('',(131.085,-107.8925,-7.5E-02)); +#481927 = VECTOR('',#481928,1.); +#481928 = DIRECTION('',(1.,0.,0.)); +#481929 = ORIENTED_EDGE('',*,*,#481930,.T.); +#481930 = EDGE_CURVE('',#481923,#481931,#481933,.T.); +#481931 = VERTEX_POINT('',#481932); +#481932 = CARTESIAN_POINT('',(131.865,-108.0125,-7.5E-02)); +#481933 = CIRCLE('',#481934,6.000000000043E-02); +#481934 = AXIS2_PLACEMENT_3D('',#481935,#481936,#481937); +#481935 = CARTESIAN_POINT('',(131.86500022558,-107.9525,-7.5E-02)); +#481936 = DIRECTION('',(0.,0.,-1.)); +#481937 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#481938 = ORIENTED_EDGE('',*,*,#481939,.T.); +#481939 = EDGE_CURVE('',#481931,#481912,#481940,.T.); +#481940 = LINE('',#481941,#481942); +#481941 = CARTESIAN_POINT('',(131.865,-108.0125,-7.5E-02)); +#481942 = VECTOR('',#481943,1.); +#481943 = DIRECTION('',(-1.,0.,0.)); +#481944 = PLANE('',#481945); +#481945 = AXIS2_PLACEMENT_3D('',#481946,#481947,#481948); +#481946 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481947 = DIRECTION('',(-0.,-0.,-1.)); +#481948 = DIRECTION('',(-1.,0.,0.)); +#481949 = SHELL_BASED_SURFACE_MODEL('',(#481950)); +#481950 = OPEN_SHELL('',(#481951)); +#481951 = ADVANCED_FACE('',(#481952),#481988,.T.); +#481952 = FACE_BOUND('',#481953,.T.); +#481953 = EDGE_LOOP('',(#481954,#481965,#481973,#481982)); +#481954 = ORIENTED_EDGE('',*,*,#481955,.T.); +#481955 = EDGE_CURVE('',#481956,#481958,#481960,.T.); +#481956 = VERTEX_POINT('',#481957); +#481957 = CARTESIAN_POINT('',(130.238748,-106.295,-7.5E-02)); +#481958 = VERTEX_POINT('',#481959); +#481959 = CARTESIAN_POINT('',(130.238748,-106.175,-7.5E-02)); +#481960 = CIRCLE('',#481961,6.000000000043E-02); +#481961 = AXIS2_PLACEMENT_3D('',#481962,#481963,#481964); +#481962 = CARTESIAN_POINT('',(130.23874777441,-106.235,-7.5E-02)); +#481963 = DIRECTION('',(0.,0.,-1.)); +#481964 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#481965 = ORIENTED_EDGE('',*,*,#481966,.T.); +#481966 = EDGE_CURVE('',#481958,#481967,#481969,.T.); +#481967 = VERTEX_POINT('',#481968); +#481968 = CARTESIAN_POINT('',(130.761252,-106.175,-7.5E-02)); +#481969 = LINE('',#481970,#481971); +#481970 = CARTESIAN_POINT('',(130.238748,-106.175,-7.5E-02)); +#481971 = VECTOR('',#481972,1.); +#481972 = DIRECTION('',(1.,0.,0.)); +#481973 = ORIENTED_EDGE('',*,*,#481974,.T.); +#481974 = EDGE_CURVE('',#481967,#481975,#481977,.T.); +#481975 = VERTEX_POINT('',#481976); +#481976 = CARTESIAN_POINT('',(130.761252,-106.295,-7.5E-02)); +#481977 = CIRCLE('',#481978,6.000000000043E-02); +#481978 = AXIS2_PLACEMENT_3D('',#481979,#481980,#481981); +#481979 = CARTESIAN_POINT('',(130.76125222558,-106.235,-7.5E-02)); +#481980 = DIRECTION('',(0.,0.,-1.)); +#481981 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#481982 = ORIENTED_EDGE('',*,*,#481983,.T.); +#481983 = EDGE_CURVE('',#481975,#481956,#481984,.T.); +#481984 = LINE('',#481985,#481986); +#481985 = CARTESIAN_POINT('',(130.761252,-106.295,-7.5E-02)); +#481986 = VECTOR('',#481987,1.); +#481987 = DIRECTION('',(-1.,0.,0.)); +#481988 = PLANE('',#481989); +#481989 = AXIS2_PLACEMENT_3D('',#481990,#481991,#481992); +#481990 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#481991 = DIRECTION('',(-0.,-0.,-1.)); +#481992 = DIRECTION('',(-1.,0.,0.)); +#481993 = SHELL_BASED_SURFACE_MODEL('',(#481994)); +#481994 = OPEN_SHELL('',(#481995)); +#481995 = ADVANCED_FACE('',(#481996),#482032,.T.); +#481996 = FACE_BOUND('',#481997,.T.); +#481997 = EDGE_LOOP('',(#481998,#482009,#482017,#482026)); +#481998 = ORIENTED_EDGE('',*,*,#481999,.T.); +#481999 = EDGE_CURVE('',#482000,#482002,#482004,.T.); +#482000 = VERTEX_POINT('',#482001); +#482001 = CARTESIAN_POINT('',(130.238748,-104.825,-7.5E-02)); +#482002 = VERTEX_POINT('',#482003); +#482003 = CARTESIAN_POINT('',(130.238748,-104.705,-7.5E-02)); +#482004 = CIRCLE('',#482005,6.000000000043E-02); +#482005 = AXIS2_PLACEMENT_3D('',#482006,#482007,#482008); +#482006 = CARTESIAN_POINT('',(130.23874777441,-104.765,-7.5E-02)); +#482007 = DIRECTION('',(0.,0.,-1.)); +#482008 = DIRECTION('',(3.759793779988E-06,-0.999999999993,0.)); +#482009 = ORIENTED_EDGE('',*,*,#482010,.T.); +#482010 = EDGE_CURVE('',#482002,#482011,#482013,.T.); +#482011 = VERTEX_POINT('',#482012); +#482012 = CARTESIAN_POINT('',(130.761252,-104.705,-7.5E-02)); +#482013 = LINE('',#482014,#482015); +#482014 = CARTESIAN_POINT('',(130.238748,-104.705,-7.5E-02)); +#482015 = VECTOR('',#482016,1.); +#482016 = DIRECTION('',(1.,0.,0.)); +#482017 = ORIENTED_EDGE('',*,*,#482018,.T.); +#482018 = EDGE_CURVE('',#482011,#482019,#482021,.T.); +#482019 = VERTEX_POINT('',#482020); +#482020 = CARTESIAN_POINT('',(130.761252,-104.825,-7.5E-02)); +#482021 = CIRCLE('',#482022,6.000000000043E-02); +#482022 = AXIS2_PLACEMENT_3D('',#482023,#482024,#482025); +#482023 = CARTESIAN_POINT('',(130.76125222558,-104.765,-7.5E-02)); +#482024 = DIRECTION('',(0.,0.,-1.)); +#482025 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#482026 = ORIENTED_EDGE('',*,*,#482027,.T.); +#482027 = EDGE_CURVE('',#482019,#482000,#482028,.T.); +#482028 = LINE('',#482029,#482030); +#482029 = CARTESIAN_POINT('',(130.761252,-104.825,-7.5E-02)); +#482030 = VECTOR('',#482031,1.); +#482031 = DIRECTION('',(-1.,0.,0.)); +#482032 = PLANE('',#482033); +#482033 = AXIS2_PLACEMENT_3D('',#482034,#482035,#482036); +#482034 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482035 = DIRECTION('',(-0.,-0.,-1.)); +#482036 = DIRECTION('',(-1.,0.,0.)); +#482037 = SHELL_BASED_SURFACE_MODEL('',(#482038)); +#482038 = OPEN_SHELL('',(#482039)); +#482039 = ADVANCED_FACE('',(#482040,#482451,#482485,#482519,#482553, + #482587),#482621,.T.); +#482040 = FACE_BOUND('',#482041,.T.); +#482041 = EDGE_LOOP('',(#482042,#482053,#482061,#482070,#482078,#482086, + #482095,#482103,#482111,#482119,#482127,#482136,#482144,#482153, + #482161,#482169,#482177,#482186,#482194,#482203,#482211,#482220, + #482228,#482236,#482244,#482252,#482260,#482269,#482277,#482285, + #482294,#482302,#482311,#482319,#482327,#482336,#482344,#482352, + #482361,#482369,#482377,#482385,#482394,#482402,#482411,#482419, + #482428,#482436,#482445)); +#482042 = ORIENTED_EDGE('',*,*,#482043,.T.); +#482043 = EDGE_CURVE('',#482044,#482046,#482048,.T.); +#482044 = VERTEX_POINT('',#482045); +#482045 = CARTESIAN_POINT('',(148.38,-76.04,-7.5E-02)); +#482046 = VERTEX_POINT('',#482047); +#482047 = CARTESIAN_POINT('',(148.44,-75.98,-7.5E-02)); +#482048 = CIRCLE('',#482049,5.999932016262E-02); +#482049 = AXIS2_PLACEMENT_3D('',#482050,#482051,#482052); +#482050 = CARTESIAN_POINT('',(148.43999932015,-76.03999932015,-7.5E-02) + ); +#482051 = DIRECTION('',(0.,0.,-1.)); +#482052 = DIRECTION('',(-0.999999999936,-1.133081564772E-05,-0.)); +#482053 = ORIENTED_EDGE('',*,*,#482054,.T.); +#482054 = EDGE_CURVE('',#482046,#482055,#482057,.T.); +#482055 = VERTEX_POINT('',#482056); +#482056 = CARTESIAN_POINT('',(149.36,-75.98,-7.5E-02)); +#482057 = LINE('',#482058,#482059); +#482058 = CARTESIAN_POINT('',(148.44,-75.98,-7.5E-02)); +#482059 = VECTOR('',#482060,1.); +#482060 = DIRECTION('',(1.,0.,0.)); +#482061 = ORIENTED_EDGE('',*,*,#482062,.T.); +#482062 = EDGE_CURVE('',#482055,#482063,#482065,.T.); +#482063 = VERTEX_POINT('',#482064); +#482064 = CARTESIAN_POINT('',(149.42,-76.04,-7.5E-02)); +#482065 = CIRCLE('',#482066,5.999932016256E-02); +#482066 = AXIS2_PLACEMENT_3D('',#482067,#482068,#482069); +#482067 = CARTESIAN_POINT('',(149.36000067984,-76.03999932015,-7.5E-02) + ); +#482068 = DIRECTION('',(0.,0.,-1.)); +#482069 = DIRECTION('',(-1.133081612143E-05,0.999999999936,0.)); +#482070 = ORIENTED_EDGE('',*,*,#482071,.T.); +#482071 = EDGE_CURVE('',#482063,#482072,#482074,.T.); +#482072 = VERTEX_POINT('',#482073); +#482073 = CARTESIAN_POINT('',(149.42,-77.58,-7.5E-02)); +#482074 = LINE('',#482075,#482076); +#482075 = CARTESIAN_POINT('',(149.42,-76.04,-7.5E-02)); +#482076 = VECTOR('',#482077,1.); +#482077 = DIRECTION('',(0.,-1.,0.)); +#482078 = ORIENTED_EDGE('',*,*,#482079,.T.); +#482079 = EDGE_CURVE('',#482072,#482080,#482082,.T.); +#482080 = VERTEX_POINT('',#482081); +#482081 = CARTESIAN_POINT('',(149.64,-77.58,-7.5E-02)); +#482082 = LINE('',#482083,#482084); +#482083 = CARTESIAN_POINT('',(149.42,-77.58,-7.5E-02)); +#482084 = VECTOR('',#482085,1.); +#482085 = DIRECTION('',(1.,0.,0.)); +#482086 = ORIENTED_EDGE('',*,*,#482087,.T.); +#482087 = EDGE_CURVE('',#482080,#482088,#482090,.T.); +#482088 = VERTEX_POINT('',#482089); +#482089 = CARTESIAN_POINT('',(149.64,-77.7,-7.5E-02)); +#482090 = CIRCLE('',#482091,6.000000000043E-02); +#482091 = AXIS2_PLACEMENT_3D('',#482092,#482093,#482094); +#482092 = CARTESIAN_POINT('',(149.64000022558,-77.64,-7.5E-02)); +#482093 = DIRECTION('',(0.,0.,-1.)); +#482094 = DIRECTION('',(-3.759794253683E-06,0.999999999993,-0.)); +#482095 = ORIENTED_EDGE('',*,*,#482096,.T.); +#482096 = EDGE_CURVE('',#482088,#482097,#482099,.T.); +#482097 = VERTEX_POINT('',#482098); +#482098 = CARTESIAN_POINT('',(148.5,-77.7,-7.5E-02)); +#482099 = LINE('',#482100,#482101); +#482100 = CARTESIAN_POINT('',(149.64,-77.7,-7.5E-02)); +#482101 = VECTOR('',#482102,1.); +#482102 = DIRECTION('',(-1.,0.,0.)); +#482103 = ORIENTED_EDGE('',*,*,#482104,.T.); +#482104 = EDGE_CURVE('',#482097,#482105,#482107,.T.); +#482105 = VERTEX_POINT('',#482106); +#482106 = CARTESIAN_POINT('',(148.5,-83.8,-7.5E-02)); +#482107 = LINE('',#482108,#482109); +#482108 = CARTESIAN_POINT('',(148.5,-77.7,-7.5E-02)); +#482109 = VECTOR('',#482110,1.); +#482110 = DIRECTION('',(0.,-1.,0.)); +#482111 = ORIENTED_EDGE('',*,*,#482112,.T.); +#482112 = EDGE_CURVE('',#482105,#482113,#482115,.T.); +#482113 = VERTEX_POINT('',#482114); +#482114 = CARTESIAN_POINT('',(150.94,-83.8,-7.5E-02)); +#482115 = LINE('',#482116,#482117); +#482116 = CARTESIAN_POINT('',(148.5,-83.8,-7.5E-02)); +#482117 = VECTOR('',#482118,1.); +#482118 = DIRECTION('',(1.,0.,0.)); +#482119 = ORIENTED_EDGE('',*,*,#482120,.T.); +#482120 = EDGE_CURVE('',#482113,#482121,#482123,.T.); +#482121 = VERTEX_POINT('',#482122); +#482122 = CARTESIAN_POINT('',(150.94,-79.5,-7.5E-02)); +#482123 = LINE('',#482124,#482125); +#482124 = CARTESIAN_POINT('',(150.94,-83.8,-7.5E-02)); +#482125 = VECTOR('',#482126,1.); +#482126 = DIRECTION('',(0.,1.,0.)); +#482127 = ORIENTED_EDGE('',*,*,#482128,.T.); +#482128 = EDGE_CURVE('',#482121,#482129,#482131,.T.); +#482129 = VERTEX_POINT('',#482130); +#482130 = CARTESIAN_POINT('',(151.,-79.44,-7.5E-02)); +#482131 = CIRCLE('',#482132,5.999932016264E-02); +#482132 = AXIS2_PLACEMENT_3D('',#482133,#482134,#482135); +#482133 = CARTESIAN_POINT('',(150.99999932015,-79.49999932015,-7.5E-02) + ); +#482134 = DIRECTION('',(0.,0.,-1.)); +#482135 = DIRECTION('',(-0.999999999936,-1.133081541086E-05,-0.)); +#482136 = ORIENTED_EDGE('',*,*,#482137,.T.); +#482137 = EDGE_CURVE('',#482129,#482138,#482140,.T.); +#482138 = VERTEX_POINT('',#482139); +#482139 = CARTESIAN_POINT('',(152.,-79.44,-7.5E-02)); +#482140 = LINE('',#482141,#482142); +#482141 = CARTESIAN_POINT('',(151.,-79.44,-7.5E-02)); +#482142 = VECTOR('',#482143,1.); +#482143 = DIRECTION('',(1.,0.,0.)); +#482144 = ORIENTED_EDGE('',*,*,#482145,.T.); +#482145 = EDGE_CURVE('',#482138,#482146,#482148,.T.); +#482146 = VERTEX_POINT('',#482147); +#482147 = CARTESIAN_POINT('',(152.06,-79.5,-7.5E-02)); +#482148 = CIRCLE('',#482149,5.999932016262E-02); +#482149 = AXIS2_PLACEMENT_3D('',#482150,#482151,#482152); +#482150 = CARTESIAN_POINT('',(152.00000067984,-79.49999932015,-7.5E-02) + ); +#482151 = DIRECTION('',(0.,0.,-1.)); +#482152 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#482153 = ORIENTED_EDGE('',*,*,#482154,.T.); +#482154 = EDGE_CURVE('',#482146,#482155,#482157,.T.); +#482155 = VERTEX_POINT('',#482156); +#482156 = CARTESIAN_POINT('',(152.06,-83.8,-7.5E-02)); +#482157 = LINE('',#482158,#482159); +#482158 = CARTESIAN_POINT('',(152.06,-79.5,-7.5E-02)); +#482159 = VECTOR('',#482160,1.); +#482160 = DIRECTION('',(0.,-1.,0.)); +#482161 = ORIENTED_EDGE('',*,*,#482162,.T.); +#482162 = EDGE_CURVE('',#482155,#482163,#482165,.T.); +#482163 = VERTEX_POINT('',#482164); +#482164 = CARTESIAN_POINT('',(152.74,-83.8,-7.5E-02)); +#482165 = LINE('',#482166,#482167); +#482166 = CARTESIAN_POINT('',(152.06,-83.8,-7.5E-02)); +#482167 = VECTOR('',#482168,1.); +#482168 = DIRECTION('',(1.,0.,0.)); +#482169 = ORIENTED_EDGE('',*,*,#482170,.T.); +#482170 = EDGE_CURVE('',#482163,#482171,#482173,.T.); +#482171 = VERTEX_POINT('',#482172); +#482172 = CARTESIAN_POINT('',(152.74,-80.,-7.5E-02)); +#482173 = LINE('',#482174,#482175); +#482174 = CARTESIAN_POINT('',(152.74,-83.8,-7.5E-02)); +#482175 = VECTOR('',#482176,1.); +#482176 = DIRECTION('',(0.,1.,0.)); +#482177 = ORIENTED_EDGE('',*,*,#482178,.T.); +#482178 = EDGE_CURVE('',#482171,#482179,#482181,.T.); +#482179 = VERTEX_POINT('',#482180); +#482180 = CARTESIAN_POINT('',(152.8,-79.94,-7.5E-02)); +#482181 = CIRCLE('',#482182,5.999932016256E-02); +#482182 = AXIS2_PLACEMENT_3D('',#482183,#482184,#482185); +#482183 = CARTESIAN_POINT('',(152.79999932015,-79.99999932015,-7.5E-02) + ); +#482184 = DIRECTION('',(0.,0.,-1.)); +#482185 = DIRECTION('',(-0.999999999936,-1.133081683198E-05,-0.)); +#482186 = ORIENTED_EDGE('',*,*,#482187,.T.); +#482187 = EDGE_CURVE('',#482179,#482188,#482190,.T.); +#482188 = VERTEX_POINT('',#482189); +#482189 = CARTESIAN_POINT('',(153.8,-79.94,-7.5E-02)); +#482190 = LINE('',#482191,#482192); +#482191 = CARTESIAN_POINT('',(152.8,-79.94,-7.5E-02)); +#482192 = VECTOR('',#482193,1.); +#482193 = DIRECTION('',(1.,0.,0.)); +#482194 = ORIENTED_EDGE('',*,*,#482195,.T.); +#482195 = EDGE_CURVE('',#482188,#482196,#482198,.T.); +#482196 = VERTEX_POINT('',#482197); +#482197 = CARTESIAN_POINT('',(153.86,-80.,-7.5E-02)); +#482198 = CIRCLE('',#482199,5.999932016264E-02); +#482199 = AXIS2_PLACEMENT_3D('',#482200,#482201,#482202); +#482200 = CARTESIAN_POINT('',(153.80000067984,-79.99999932015,-7.5E-02) + ); +#482201 = DIRECTION('',(0.,0.,-1.)); +#482202 = DIRECTION('',(-1.133081517402E-05,0.999999999936,0.)); +#482203 = ORIENTED_EDGE('',*,*,#482204,.T.); +#482204 = EDGE_CURVE('',#482196,#482205,#482207,.T.); +#482205 = VERTEX_POINT('',#482206); +#482206 = CARTESIAN_POINT('',(153.86,-81.6,-7.5E-02)); +#482207 = LINE('',#482208,#482209); +#482208 = CARTESIAN_POINT('',(153.86,-80.,-7.5E-02)); +#482209 = VECTOR('',#482210,1.); +#482210 = DIRECTION('',(0.,-1.,0.)); +#482211 = ORIENTED_EDGE('',*,*,#482212,.T.); +#482212 = EDGE_CURVE('',#482205,#482213,#482215,.T.); +#482213 = VERTEX_POINT('',#482214); +#482214 = CARTESIAN_POINT('',(153.8,-81.66,-7.5E-02)); +#482215 = CIRCLE('',#482216,5.999932016262E-02); +#482216 = AXIS2_PLACEMENT_3D('',#482217,#482218,#482219); +#482217 = CARTESIAN_POINT('',(153.80000067984,-81.60000067984,-7.5E-02) + ); +#482218 = DIRECTION('',(0.,0.,-1.)); +#482219 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#482220 = ORIENTED_EDGE('',*,*,#482221,.T.); +#482221 = EDGE_CURVE('',#482213,#482222,#482224,.T.); +#482222 = VERTEX_POINT('',#482223); +#482223 = CARTESIAN_POINT('',(153.36,-81.66,-7.5E-02)); +#482224 = LINE('',#482225,#482226); +#482225 = CARTESIAN_POINT('',(153.8,-81.66,-7.5E-02)); +#482226 = VECTOR('',#482227,1.); +#482227 = DIRECTION('',(-1.,0.,0.)); +#482228 = ORIENTED_EDGE('',*,*,#482229,.T.); +#482229 = EDGE_CURVE('',#482222,#482230,#482232,.T.); +#482230 = VERTEX_POINT('',#482231); +#482231 = CARTESIAN_POINT('',(153.36,-83.8,-7.5E-02)); +#482232 = LINE('',#482233,#482234); +#482233 = CARTESIAN_POINT('',(153.36,-81.66,-7.5E-02)); +#482234 = VECTOR('',#482235,1.); +#482235 = DIRECTION('',(0.,-1.,0.)); +#482236 = ORIENTED_EDGE('',*,*,#482237,.T.); +#482237 = EDGE_CURVE('',#482230,#482238,#482240,.T.); +#482238 = VERTEX_POINT('',#482239); +#482239 = CARTESIAN_POINT('',(154.5,-83.8,-7.5E-02)); +#482240 = LINE('',#482241,#482242); +#482241 = CARTESIAN_POINT('',(153.36,-83.8,-7.5E-02)); +#482242 = VECTOR('',#482243,1.); +#482243 = DIRECTION('',(1.,0.,0.)); +#482244 = ORIENTED_EDGE('',*,*,#482245,.T.); +#482245 = EDGE_CURVE('',#482238,#482246,#482248,.T.); +#482246 = VERTEX_POINT('',#482247); +#482247 = CARTESIAN_POINT('',(154.5,-77.7,-7.5E-02)); +#482248 = LINE('',#482249,#482250); +#482249 = CARTESIAN_POINT('',(154.5,-83.8,-7.5E-02)); +#482250 = VECTOR('',#482251,1.); +#482251 = DIRECTION('',(0.,1.,0.)); +#482252 = ORIENTED_EDGE('',*,*,#482253,.T.); +#482253 = EDGE_CURVE('',#482246,#482254,#482256,.T.); +#482254 = VERTEX_POINT('',#482255); +#482255 = CARTESIAN_POINT('',(153.36,-77.7,-7.5E-02)); +#482256 = LINE('',#482257,#482258); +#482257 = CARTESIAN_POINT('',(154.5,-77.7,-7.5E-02)); +#482258 = VECTOR('',#482259,1.); +#482259 = DIRECTION('',(-1.,0.,0.)); +#482260 = ORIENTED_EDGE('',*,*,#482261,.T.); +#482261 = EDGE_CURVE('',#482254,#482262,#482264,.T.); +#482262 = VERTEX_POINT('',#482263); +#482263 = CARTESIAN_POINT('',(153.3,-77.64,-7.5E-02)); +#482264 = CIRCLE('',#482265,5.999932016262E-02); +#482265 = AXIS2_PLACEMENT_3D('',#482266,#482267,#482268); +#482266 = CARTESIAN_POINT('',(153.35999932015,-77.64000067984,-7.5E-02) + ); +#482267 = DIRECTION('',(0.,0.,-1.)); +#482268 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#482269 = ORIENTED_EDGE('',*,*,#482270,.T.); +#482270 = EDGE_CURVE('',#482262,#482271,#482273,.T.); +#482271 = VERTEX_POINT('',#482272); +#482272 = CARTESIAN_POINT('',(153.3,-76.42522,-7.5E-02)); +#482273 = LINE('',#482274,#482275); +#482274 = CARTESIAN_POINT('',(153.3,-77.64,-7.5E-02)); +#482275 = VECTOR('',#482276,1.); +#482276 = DIRECTION('',(0.,1.,0.)); +#482277 = ORIENTED_EDGE('',*,*,#482278,.T.); +#482278 = EDGE_CURVE('',#482271,#482279,#482281,.T.); +#482279 = VERTEX_POINT('',#482280); +#482280 = CARTESIAN_POINT('',(152.987901,-77.356962,-7.5E-02)); +#482281 = LINE('',#482282,#482283); +#482282 = CARTESIAN_POINT('',(153.3,-76.42522,-7.5E-02)); +#482283 = VECTOR('',#482284,1.); +#482284 = DIRECTION('',(-0.317618091147,-0.948218723806,0.)); +#482285 = ORIENTED_EDGE('',*,*,#482286,.T.); +#482286 = EDGE_CURVE('',#482279,#482287,#482289,.T.); +#482287 = VERTEX_POINT('',#482288); +#482288 = CARTESIAN_POINT('',(152.857587,-77.356961,-7.5E-02)); +#482289 = CIRCLE('',#482290,7.500015904106E-02); +#482290 = AXIS2_PLACEMENT_3D('',#482291,#482292,#482293); +#482291 = CARTESIAN_POINT('',(152.92274428502,-77.31981867825,-7.5E-02) + ); +#482292 = DIRECTION('',(-0.,0.,-1.)); +#482293 = DIRECTION('',(0.868754357424,-0.495243239688,-0.)); +#482294 = ORIENTED_EDGE('',*,*,#482295,.T.); +#482295 = EDGE_CURVE('',#482287,#482296,#482298,.T.); +#482296 = VERTEX_POINT('',#482297); +#482297 = CARTESIAN_POINT('',(152.515,-76.329199,-7.5E-02)); +#482298 = LINE('',#482299,#482300); +#482299 = CARTESIAN_POINT('',(152.857587,-77.356961,-7.5E-02)); +#482300 = VECTOR('',#482301,1.); +#482301 = DIRECTION('',(-0.3162274891,0.948683390356,0.)); +#482302 = ORIENTED_EDGE('',*,*,#482303,.T.); +#482303 = EDGE_CURVE('',#482296,#482304,#482306,.T.); +#482304 = VERTEX_POINT('',#482305); +#482305 = CARTESIAN_POINT('',(152.660562,-76.296102,-7.5E-02)); +#482306 = CIRCLE('',#482307,7.499975943129E-02); +#482307 = AXIS2_PLACEMENT_3D('',#482308,#482309,#482310); +#482308 = CARTESIAN_POINT('',(152.58941082483,-76.31981853826,-7.5E-02) + ); +#482309 = DIRECTION('',(0.,0.,-1.)); +#482310 = DIRECTION('',(-0.992147513501,-0.125073224367,-0.)); +#482311 = ORIENTED_EDGE('',*,*,#482312,.T.); +#482312 = EDGE_CURVE('',#482304,#482313,#482315,.T.); +#482313 = VERTEX_POINT('',#482314); +#482314 = CARTESIAN_POINT('',(152.922744,-77.082648,-7.5E-02)); +#482315 = LINE('',#482316,#482317); +#482316 = CARTESIAN_POINT('',(152.660562,-76.296102,-7.5E-02)); +#482317 = VECTOR('',#482318,1.); +#482318 = DIRECTION('',(0.316227766017,-0.948683298051,0.)); +#482319 = ORIENTED_EDGE('',*,*,#482320,.T.); +#482320 = EDGE_CURVE('',#482313,#482321,#482323,.T.); +#482321 = VERTEX_POINT('',#482322); +#482322 = CARTESIAN_POINT('',(153.19092,-76.282677,-7.5E-02)); +#482323 = LINE('',#482324,#482325); +#482324 = CARTESIAN_POINT('',(152.922744,-77.082648,-7.5E-02)); +#482325 = VECTOR('',#482326,1.); +#482326 = DIRECTION('',(0.317847619348,0.948141809475,0.)); +#482327 = ORIENTED_EDGE('',*,*,#482328,.T.); +#482328 = EDGE_CURVE('',#482321,#482329,#482331,.T.); +#482329 = VERTEX_POINT('',#482330); +#482330 = CARTESIAN_POINT('',(153.327228,-76.343536,-7.5E-02)); +#482331 = CIRCLE('',#482332,7.499973107799E-02); +#482332 = AXIS2_PLACEMENT_3D('',#482333,#482334,#482335); +#482333 = CARTESIAN_POINT('',(153.25607705484,-76.31981886137,-7.5E-02) + ); +#482334 = DIRECTION('',(0.,0.,-1.)); +#482335 = DIRECTION('',(-0.868763846258,0.49522659403,0.)); +#482336 = ORIENTED_EDGE('',*,*,#482337,.T.); +#482337 = EDGE_CURVE('',#482329,#482338,#482340,.T.); +#482338 = VERTEX_POINT('',#482339); +#482339 = CARTESIAN_POINT('',(153.309307,-76.397298,-7.5E-02)); +#482340 = LINE('',#482341,#482342); +#482341 = CARTESIAN_POINT('',(153.327228,-76.343536,-7.5E-02)); +#482342 = VECTOR('',#482343,1.); +#482343 = DIRECTION('',(-0.316233059797,-0.948681533441,0.)); +#482344 = ORIENTED_EDGE('',*,*,#482345,.T.); +#482345 = EDGE_CURVE('',#482338,#482346,#482348,.T.); +#482346 = VERTEX_POINT('',#482347); +#482347 = CARTESIAN_POINT('',(153.337039,-76.369567,-7.5E-02)); +#482348 = LINE('',#482349,#482350); +#482349 = CARTESIAN_POINT('',(153.309307,-76.397298,-7.5E-02)); +#482350 = VECTOR('',#482351,1.); +#482351 = DIRECTION('',(0.707119530234,0.707094031909,0.)); +#482352 = ORIENTED_EDGE('',*,*,#482353,.T.); +#482353 = EDGE_CURVE('',#482346,#482354,#482356,.T.); +#482354 = VERTEX_POINT('',#482355); +#482355 = CARTESIAN_POINT('',(153.42,-76.425,-7.5E-02)); +#482356 = CIRCLE('',#482357,6.00000000004E-02); +#482357 = AXIS2_PLACEMENT_3D('',#482358,#482359,#482360); +#482358 = CARTESIAN_POINT('',(153.36,-76.42499977441,-7.5E-02)); +#482359 = DIRECTION('',(0.,0.,-1.)); +#482360 = DIRECTION('',(-0.382683333331,0.923879573533,0.)); +#482361 = ORIENTED_EDGE('',*,*,#482362,.T.); +#482362 = EDGE_CURVE('',#482354,#482363,#482365,.T.); +#482363 = VERTEX_POINT('',#482364); +#482364 = CARTESIAN_POINT('',(153.42,-77.58,-7.5E-02)); +#482365 = LINE('',#482366,#482367); +#482366 = CARTESIAN_POINT('',(153.42,-76.425,-7.5E-02)); +#482367 = VECTOR('',#482368,1.); +#482368 = DIRECTION('',(0.,-1.,0.)); +#482369 = ORIENTED_EDGE('',*,*,#482370,.T.); +#482370 = EDGE_CURVE('',#482363,#482371,#482373,.T.); +#482371 = VERTEX_POINT('',#482372); +#482372 = CARTESIAN_POINT('',(153.58,-77.58,-7.5E-02)); +#482373 = LINE('',#482374,#482375); +#482374 = CARTESIAN_POINT('',(153.42,-77.58,-7.5E-02)); +#482375 = VECTOR('',#482376,1.); +#482376 = DIRECTION('',(1.,0.,0.)); +#482377 = ORIENTED_EDGE('',*,*,#482378,.T.); +#482378 = EDGE_CURVE('',#482371,#482379,#482381,.T.); +#482379 = VERTEX_POINT('',#482380); +#482380 = CARTESIAN_POINT('',(153.58,-76.04,-7.5E-02)); +#482381 = LINE('',#482382,#482383); +#482382 = CARTESIAN_POINT('',(153.58,-77.58,-7.5E-02)); +#482383 = VECTOR('',#482384,1.); +#482384 = DIRECTION('',(0.,1.,0.)); +#482385 = ORIENTED_EDGE('',*,*,#482386,.T.); +#482386 = EDGE_CURVE('',#482379,#482387,#482389,.T.); +#482387 = VERTEX_POINT('',#482388); +#482388 = CARTESIAN_POINT('',(153.64,-75.98,-7.5E-02)); +#482389 = CIRCLE('',#482390,5.999932016253E-02); +#482390 = AXIS2_PLACEMENT_3D('',#482391,#482392,#482393); +#482391 = CARTESIAN_POINT('',(153.63999932015,-76.03999932015,-7.5E-02) + ); +#482392 = DIRECTION('',(0.,0.,-1.)); +#482393 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#482394 = ORIENTED_EDGE('',*,*,#482395,.T.); +#482395 = EDGE_CURVE('',#482387,#482396,#482398,.T.); +#482396 = VERTEX_POINT('',#482397); +#482397 = CARTESIAN_POINT('',(154.56,-75.98,-7.5E-02)); +#482398 = LINE('',#482399,#482400); +#482399 = CARTESIAN_POINT('',(153.64,-75.98,-7.5E-02)); +#482400 = VECTOR('',#482401,1.); +#482401 = DIRECTION('',(1.,0.,0.)); +#482402 = ORIENTED_EDGE('',*,*,#482403,.T.); +#482403 = EDGE_CURVE('',#482396,#482404,#482406,.T.); +#482404 = VERTEX_POINT('',#482405); +#482405 = CARTESIAN_POINT('',(154.62,-76.04,-7.5E-02)); +#482406 = CIRCLE('',#482407,5.999932016256E-02); +#482407 = AXIS2_PLACEMENT_3D('',#482408,#482409,#482410); +#482408 = CARTESIAN_POINT('',(154.56000067984,-76.03999932015,-7.5E-02) + ); +#482409 = DIRECTION('',(0.,0.,-1.)); +#482410 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#482411 = ORIENTED_EDGE('',*,*,#482412,.T.); +#482412 = EDGE_CURVE('',#482404,#482413,#482415,.T.); +#482413 = VERTEX_POINT('',#482414); +#482414 = CARTESIAN_POINT('',(154.62,-83.86,-7.5E-02)); +#482415 = LINE('',#482416,#482417); +#482416 = CARTESIAN_POINT('',(154.62,-76.04,-7.5E-02)); +#482417 = VECTOR('',#482418,1.); +#482418 = DIRECTION('',(0.,-1.,0.)); +#482419 = ORIENTED_EDGE('',*,*,#482420,.T.); +#482420 = EDGE_CURVE('',#482413,#482421,#482423,.T.); +#482421 = VERTEX_POINT('',#482422); +#482422 = CARTESIAN_POINT('',(154.56,-83.92,-7.5E-02)); +#482423 = CIRCLE('',#482424,5.999932016265E-02); +#482424 = AXIS2_PLACEMENT_3D('',#482425,#482426,#482427); +#482425 = CARTESIAN_POINT('',(154.56000067984,-83.86000067984,-7.5E-02) + ); +#482426 = DIRECTION('',(0.,0.,-1.)); +#482427 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#482428 = ORIENTED_EDGE('',*,*,#482429,.T.); +#482429 = EDGE_CURVE('',#482421,#482430,#482432,.T.); +#482430 = VERTEX_POINT('',#482431); +#482431 = CARTESIAN_POINT('',(148.44,-83.92,-7.5E-02)); +#482432 = LINE('',#482433,#482434); +#482433 = CARTESIAN_POINT('',(154.56,-83.92,-7.5E-02)); +#482434 = VECTOR('',#482435,1.); +#482435 = DIRECTION('',(-1.,0.,0.)); +#482436 = ORIENTED_EDGE('',*,*,#482437,.T.); +#482437 = EDGE_CURVE('',#482430,#482438,#482440,.T.); +#482438 = VERTEX_POINT('',#482439); +#482439 = CARTESIAN_POINT('',(148.38,-83.86,-7.5E-02)); +#482440 = CIRCLE('',#482441,5.999932016262E-02); +#482441 = AXIS2_PLACEMENT_3D('',#482442,#482443,#482444); +#482442 = CARTESIAN_POINT('',(148.43999932015,-83.86000067984,-7.5E-02) + ); +#482443 = DIRECTION('',(0.,0.,-1.)); +#482444 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#482445 = ORIENTED_EDGE('',*,*,#482446,.T.); +#482446 = EDGE_CURVE('',#482438,#482044,#482447,.T.); +#482447 = LINE('',#482448,#482449); +#482448 = CARTESIAN_POINT('',(148.38,-83.86,-7.5E-02)); +#482449 = VECTOR('',#482450,1.); +#482450 = DIRECTION('',(0.,1.,0.)); +#482451 = FACE_BOUND('',#482452,.T.); +#482452 = EDGE_LOOP('',(#482453,#482463,#482471,#482479)); +#482453 = ORIENTED_EDGE('',*,*,#482454,.T.); +#482454 = EDGE_CURVE('',#482455,#482457,#482459,.T.); +#482455 = VERTEX_POINT('',#482456); +#482456 = CARTESIAN_POINT('',(151.94,-83.8,-7.5E-02)); +#482457 = VERTEX_POINT('',#482458); +#482458 = CARTESIAN_POINT('',(151.94,-79.56,-7.5E-02)); +#482459 = LINE('',#482460,#482461); +#482460 = CARTESIAN_POINT('',(151.94,-83.8,-7.5E-02)); +#482461 = VECTOR('',#482462,1.); +#482462 = DIRECTION('',(0.,1.,0.)); +#482463 = ORIENTED_EDGE('',*,*,#482464,.T.); +#482464 = EDGE_CURVE('',#482457,#482465,#482467,.T.); +#482465 = VERTEX_POINT('',#482466); +#482466 = CARTESIAN_POINT('',(151.06,-79.56,-7.5E-02)); +#482467 = LINE('',#482468,#482469); +#482468 = CARTESIAN_POINT('',(151.94,-79.56,-7.5E-02)); +#482469 = VECTOR('',#482470,1.); +#482470 = DIRECTION('',(-1.,0.,0.)); +#482471 = ORIENTED_EDGE('',*,*,#482472,.T.); +#482472 = EDGE_CURVE('',#482465,#482473,#482475,.T.); +#482473 = VERTEX_POINT('',#482474); +#482474 = CARTESIAN_POINT('',(151.06,-83.8,-7.5E-02)); +#482475 = LINE('',#482476,#482477); +#482476 = CARTESIAN_POINT('',(151.06,-79.56,-7.5E-02)); +#482477 = VECTOR('',#482478,1.); +#482478 = DIRECTION('',(0.,-1.,0.)); +#482479 = ORIENTED_EDGE('',*,*,#482480,.T.); +#482480 = EDGE_CURVE('',#482473,#482455,#482481,.T.); +#482481 = LINE('',#482482,#482483); +#482482 = CARTESIAN_POINT('',(151.06,-83.8,-7.5E-02)); +#482483 = VECTOR('',#482484,1.); +#482484 = DIRECTION('',(1.,0.,0.)); +#482485 = FACE_BOUND('',#482486,.T.); +#482486 = EDGE_LOOP('',(#482487,#482497,#482505,#482513)); +#482487 = ORIENTED_EDGE('',*,*,#482488,.T.); +#482488 = EDGE_CURVE('',#482489,#482491,#482493,.T.); +#482489 = VERTEX_POINT('',#482490); +#482490 = CARTESIAN_POINT('',(153.24,-83.8,-7.5E-02)); +#482491 = VERTEX_POINT('',#482492); +#482492 = CARTESIAN_POINT('',(153.24,-81.66,-7.5E-02)); +#482493 = LINE('',#482494,#482495); +#482494 = CARTESIAN_POINT('',(153.24,-83.8,-7.5E-02)); +#482495 = VECTOR('',#482496,1.); +#482496 = DIRECTION('',(0.,1.,0.)); +#482497 = ORIENTED_EDGE('',*,*,#482498,.T.); +#482498 = EDGE_CURVE('',#482491,#482499,#482501,.T.); +#482499 = VERTEX_POINT('',#482500); +#482500 = CARTESIAN_POINT('',(152.86,-81.66,-7.5E-02)); +#482501 = LINE('',#482502,#482503); +#482502 = CARTESIAN_POINT('',(153.24,-81.66,-7.5E-02)); +#482503 = VECTOR('',#482504,1.); +#482504 = DIRECTION('',(-1.,0.,0.)); +#482505 = ORIENTED_EDGE('',*,*,#482506,.T.); +#482506 = EDGE_CURVE('',#482499,#482507,#482509,.T.); +#482507 = VERTEX_POINT('',#482508); +#482508 = CARTESIAN_POINT('',(152.86,-83.8,-7.5E-02)); +#482509 = LINE('',#482510,#482511); +#482510 = CARTESIAN_POINT('',(152.86,-81.66,-7.5E-02)); +#482511 = VECTOR('',#482512,1.); +#482512 = DIRECTION('',(0.,-1.,0.)); +#482513 = ORIENTED_EDGE('',*,*,#482514,.T.); +#482514 = EDGE_CURVE('',#482507,#482489,#482515,.T.); +#482515 = LINE('',#482516,#482517); +#482516 = CARTESIAN_POINT('',(152.86,-83.8,-7.5E-02)); +#482517 = VECTOR('',#482518,1.); +#482518 = DIRECTION('',(1.,0.,0.)); +#482519 = FACE_BOUND('',#482520,.T.); +#482520 = EDGE_LOOP('',(#482521,#482531,#482539,#482547)); +#482521 = ORIENTED_EDGE('',*,*,#482522,.T.); +#482522 = EDGE_CURVE('',#482523,#482525,#482527,.T.); +#482523 = VERTEX_POINT('',#482524); +#482524 = CARTESIAN_POINT('',(153.74,-81.54,-7.5E-02)); +#482525 = VERTEX_POINT('',#482526); +#482526 = CARTESIAN_POINT('',(153.74,-80.06,-7.5E-02)); +#482527 = LINE('',#482528,#482529); +#482528 = CARTESIAN_POINT('',(153.74,-81.54,-7.5E-02)); +#482529 = VECTOR('',#482530,1.); +#482530 = DIRECTION('',(0.,1.,0.)); +#482531 = ORIENTED_EDGE('',*,*,#482532,.T.); +#482532 = EDGE_CURVE('',#482525,#482533,#482535,.T.); +#482533 = VERTEX_POINT('',#482534); +#482534 = CARTESIAN_POINT('',(152.86,-80.06,-7.5E-02)); +#482535 = LINE('',#482536,#482537); +#482536 = CARTESIAN_POINT('',(153.74,-80.06,-7.5E-02)); +#482537 = VECTOR('',#482538,1.); +#482538 = DIRECTION('',(-1.,0.,0.)); +#482539 = ORIENTED_EDGE('',*,*,#482540,.T.); +#482540 = EDGE_CURVE('',#482533,#482541,#482543,.T.); +#482541 = VERTEX_POINT('',#482542); +#482542 = CARTESIAN_POINT('',(152.86,-81.54,-7.5E-02)); +#482543 = LINE('',#482544,#482545); +#482544 = CARTESIAN_POINT('',(152.86,-80.06,-7.5E-02)); +#482545 = VECTOR('',#482546,1.); +#482546 = DIRECTION('',(0.,-1.,0.)); +#482547 = ORIENTED_EDGE('',*,*,#482548,.T.); +#482548 = EDGE_CURVE('',#482541,#482523,#482549,.T.); +#482549 = LINE('',#482550,#482551); +#482550 = CARTESIAN_POINT('',(152.86,-81.54,-7.5E-02)); +#482551 = VECTOR('',#482552,1.); +#482552 = DIRECTION('',(1.,0.,0.)); +#482553 = FACE_BOUND('',#482554,.T.); +#482554 = EDGE_LOOP('',(#482555,#482565,#482573,#482581)); +#482555 = ORIENTED_EDGE('',*,*,#482556,.T.); +#482556 = EDGE_CURVE('',#482557,#482559,#482561,.T.); +#482557 = VERTEX_POINT('',#482558); +#482558 = CARTESIAN_POINT('',(149.3,-77.58,-7.5E-02)); +#482559 = VERTEX_POINT('',#482560); +#482560 = CARTESIAN_POINT('',(149.3,-76.1,-7.5E-02)); +#482561 = LINE('',#482562,#482563); +#482562 = CARTESIAN_POINT('',(149.3,-77.58,-7.5E-02)); +#482563 = VECTOR('',#482564,1.); +#482564 = DIRECTION('',(0.,1.,0.)); +#482565 = ORIENTED_EDGE('',*,*,#482566,.T.); +#482566 = EDGE_CURVE('',#482559,#482567,#482569,.T.); +#482567 = VERTEX_POINT('',#482568); +#482568 = CARTESIAN_POINT('',(148.5,-76.1,-7.5E-02)); +#482569 = LINE('',#482570,#482571); +#482570 = CARTESIAN_POINT('',(149.3,-76.1,-7.5E-02)); +#482571 = VECTOR('',#482572,1.); +#482572 = DIRECTION('',(-1.,0.,0.)); +#482573 = ORIENTED_EDGE('',*,*,#482574,.T.); +#482574 = EDGE_CURVE('',#482567,#482575,#482577,.T.); +#482575 = VERTEX_POINT('',#482576); +#482576 = CARTESIAN_POINT('',(148.5,-77.58,-7.5E-02)); +#482577 = LINE('',#482578,#482579); +#482578 = CARTESIAN_POINT('',(148.5,-76.1,-7.5E-02)); +#482579 = VECTOR('',#482580,1.); +#482580 = DIRECTION('',(0.,-1.,0.)); +#482581 = ORIENTED_EDGE('',*,*,#482582,.T.); +#482582 = EDGE_CURVE('',#482575,#482557,#482583,.T.); +#482583 = LINE('',#482584,#482585); +#482584 = CARTESIAN_POINT('',(148.5,-77.58,-7.5E-02)); +#482585 = VECTOR('',#482586,1.); +#482586 = DIRECTION('',(1.,0.,0.)); +#482587 = FACE_BOUND('',#482588,.T.); +#482588 = EDGE_LOOP('',(#482589,#482599,#482607,#482615)); +#482589 = ORIENTED_EDGE('',*,*,#482590,.T.); +#482590 = EDGE_CURVE('',#482591,#482593,#482595,.T.); +#482591 = VERTEX_POINT('',#482592); +#482592 = CARTESIAN_POINT('',(154.5,-77.58,-7.5E-02)); +#482593 = VERTEX_POINT('',#482594); +#482594 = CARTESIAN_POINT('',(154.5,-76.1,-7.5E-02)); +#482595 = LINE('',#482596,#482597); +#482596 = CARTESIAN_POINT('',(154.5,-77.58,-7.5E-02)); +#482597 = VECTOR('',#482598,1.); +#482598 = DIRECTION('',(0.,1.,0.)); +#482599 = ORIENTED_EDGE('',*,*,#482600,.T.); +#482600 = EDGE_CURVE('',#482593,#482601,#482603,.T.); +#482601 = VERTEX_POINT('',#482602); +#482602 = CARTESIAN_POINT('',(153.7,-76.1,-7.5E-02)); +#482603 = LINE('',#482604,#482605); +#482604 = CARTESIAN_POINT('',(154.5,-76.1,-7.5E-02)); +#482605 = VECTOR('',#482606,1.); +#482606 = DIRECTION('',(-1.,0.,0.)); +#482607 = ORIENTED_EDGE('',*,*,#482608,.T.); +#482608 = EDGE_CURVE('',#482601,#482609,#482611,.T.); +#482609 = VERTEX_POINT('',#482610); +#482610 = CARTESIAN_POINT('',(153.7,-77.58,-7.5E-02)); +#482611 = LINE('',#482612,#482613); +#482612 = CARTESIAN_POINT('',(153.7,-76.1,-7.5E-02)); +#482613 = VECTOR('',#482614,1.); +#482614 = DIRECTION('',(0.,-1.,0.)); +#482615 = ORIENTED_EDGE('',*,*,#482616,.T.); +#482616 = EDGE_CURVE('',#482609,#482591,#482617,.T.); +#482617 = LINE('',#482618,#482619); +#482618 = CARTESIAN_POINT('',(153.7,-77.58,-7.5E-02)); +#482619 = VECTOR('',#482620,1.); +#482620 = DIRECTION('',(1.,0.,0.)); +#482621 = PLANE('',#482622); +#482622 = AXIS2_PLACEMENT_3D('',#482623,#482624,#482625); +#482623 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482624 = DIRECTION('',(-0.,-0.,-1.)); +#482625 = DIRECTION('',(-1.,0.,0.)); +#482626 = SHELL_BASED_SURFACE_MODEL('',(#482627)); +#482627 = OPEN_SHELL('',(#482628)); +#482628 = ADVANCED_FACE('',(#482629,#482699),#482733,.T.); +#482629 = FACE_BOUND('',#482630,.T.); +#482630 = EDGE_LOOP('',(#482631,#482642,#482650,#482659,#482667,#482676, + #482684,#482693)); +#482631 = ORIENTED_EDGE('',*,*,#482632,.T.); +#482632 = EDGE_CURVE('',#482633,#482635,#482637,.T.); +#482633 = VERTEX_POINT('',#482634); +#482634 = CARTESIAN_POINT('',(149.14,-80.,-7.5E-02)); +#482635 = VERTEX_POINT('',#482636); +#482636 = CARTESIAN_POINT('',(149.2,-79.94,-7.5E-02)); +#482637 = CIRCLE('',#482638,5.999932016264E-02); +#482638 = AXIS2_PLACEMENT_3D('',#482639,#482640,#482641); +#482639 = CARTESIAN_POINT('',(149.19999932015,-79.99999932015,-7.5E-02) + ); +#482640 = DIRECTION('',(0.,0.,-1.)); +#482641 = DIRECTION('',(-0.999999999936,-1.133081541086E-05,-0.)); +#482642 = ORIENTED_EDGE('',*,*,#482643,.T.); +#482643 = EDGE_CURVE('',#482635,#482644,#482646,.T.); +#482644 = VERTEX_POINT('',#482645); +#482645 = CARTESIAN_POINT('',(150.2,-79.94,-7.5E-02)); +#482646 = LINE('',#482647,#482648); +#482647 = CARTESIAN_POINT('',(149.2,-79.94,-7.5E-02)); +#482648 = VECTOR('',#482649,1.); +#482649 = DIRECTION('',(1.,0.,0.)); +#482650 = ORIENTED_EDGE('',*,*,#482651,.T.); +#482651 = EDGE_CURVE('',#482644,#482652,#482654,.T.); +#482652 = VERTEX_POINT('',#482653); +#482653 = CARTESIAN_POINT('',(150.26,-80.,-7.5E-02)); +#482654 = CIRCLE('',#482655,5.999932016262E-02); +#482655 = AXIS2_PLACEMENT_3D('',#482656,#482657,#482658); +#482656 = CARTESIAN_POINT('',(150.20000067984,-79.99999932015,-7.5E-02) + ); +#482657 = DIRECTION('',(0.,0.,-1.)); +#482658 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#482659 = ORIENTED_EDGE('',*,*,#482660,.T.); +#482660 = EDGE_CURVE('',#482652,#482661,#482663,.T.); +#482661 = VERTEX_POINT('',#482662); +#482662 = CARTESIAN_POINT('',(150.26,-81.6,-7.5E-02)); +#482663 = LINE('',#482664,#482665); +#482664 = CARTESIAN_POINT('',(150.26,-80.,-7.5E-02)); +#482665 = VECTOR('',#482666,1.); +#482666 = DIRECTION('',(0.,-1.,0.)); +#482667 = ORIENTED_EDGE('',*,*,#482668,.T.); +#482668 = EDGE_CURVE('',#482661,#482669,#482671,.T.); +#482669 = VERTEX_POINT('',#482670); +#482670 = CARTESIAN_POINT('',(150.2,-81.66,-7.5E-02)); +#482671 = CIRCLE('',#482672,5.999932016255E-02); +#482672 = AXIS2_PLACEMENT_3D('',#482673,#482674,#482675); +#482673 = CARTESIAN_POINT('',(150.20000067984,-81.60000067984,-7.5E-02) + ); +#482674 = DIRECTION('',(0.,0.,-1.)); +#482675 = DIRECTION('',(0.999999999936,1.133081706883E-05,0.)); +#482676 = ORIENTED_EDGE('',*,*,#482677,.T.); +#482677 = EDGE_CURVE('',#482669,#482678,#482680,.T.); +#482678 = VERTEX_POINT('',#482679); +#482679 = CARTESIAN_POINT('',(149.2,-81.66,-7.5E-02)); +#482680 = LINE('',#482681,#482682); +#482681 = CARTESIAN_POINT('',(150.2,-81.66,-7.5E-02)); +#482682 = VECTOR('',#482683,1.); +#482683 = DIRECTION('',(-1.,0.,0.)); +#482684 = ORIENTED_EDGE('',*,*,#482685,.T.); +#482685 = EDGE_CURVE('',#482678,#482686,#482688,.T.); +#482686 = VERTEX_POINT('',#482687); +#482687 = CARTESIAN_POINT('',(149.14,-81.6,-7.5E-02)); +#482688 = CIRCLE('',#482689,5.999932016259E-02); +#482689 = AXIS2_PLACEMENT_3D('',#482690,#482691,#482692); +#482690 = CARTESIAN_POINT('',(149.19999932015,-81.60000067984,-7.5E-02) + ); +#482691 = DIRECTION('',(0.,0.,-1.)); +#482692 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#482693 = ORIENTED_EDGE('',*,*,#482694,.T.); +#482694 = EDGE_CURVE('',#482686,#482633,#482695,.T.); +#482695 = LINE('',#482696,#482697); +#482696 = CARTESIAN_POINT('',(149.14,-81.6,-7.5E-02)); +#482697 = VECTOR('',#482698,1.); +#482698 = DIRECTION('',(0.,1.,0.)); +#482699 = FACE_BOUND('',#482700,.T.); +#482700 = EDGE_LOOP('',(#482701,#482711,#482719,#482727)); +#482701 = ORIENTED_EDGE('',*,*,#482702,.T.); +#482702 = EDGE_CURVE('',#482703,#482705,#482707,.T.); +#482703 = VERTEX_POINT('',#482704); +#482704 = CARTESIAN_POINT('',(150.14,-81.54,-7.5E-02)); +#482705 = VERTEX_POINT('',#482706); +#482706 = CARTESIAN_POINT('',(150.14,-80.06,-7.5E-02)); +#482707 = LINE('',#482708,#482709); +#482708 = CARTESIAN_POINT('',(150.14,-81.54,-7.5E-02)); +#482709 = VECTOR('',#482710,1.); +#482710 = DIRECTION('',(0.,1.,0.)); +#482711 = ORIENTED_EDGE('',*,*,#482712,.T.); +#482712 = EDGE_CURVE('',#482705,#482713,#482715,.T.); +#482713 = VERTEX_POINT('',#482714); +#482714 = CARTESIAN_POINT('',(149.26,-80.06,-7.5E-02)); +#482715 = LINE('',#482716,#482717); +#482716 = CARTESIAN_POINT('',(150.14,-80.06,-7.5E-02)); +#482717 = VECTOR('',#482718,1.); +#482718 = DIRECTION('',(-1.,0.,0.)); +#482719 = ORIENTED_EDGE('',*,*,#482720,.T.); +#482720 = EDGE_CURVE('',#482713,#482721,#482723,.T.); +#482721 = VERTEX_POINT('',#482722); +#482722 = CARTESIAN_POINT('',(149.26,-81.54,-7.5E-02)); +#482723 = LINE('',#482724,#482725); +#482724 = CARTESIAN_POINT('',(149.26,-80.06,-7.5E-02)); +#482725 = VECTOR('',#482726,1.); +#482726 = DIRECTION('',(0.,-1.,0.)); +#482727 = ORIENTED_EDGE('',*,*,#482728,.T.); +#482728 = EDGE_CURVE('',#482721,#482703,#482729,.T.); +#482729 = LINE('',#482730,#482731); +#482730 = CARTESIAN_POINT('',(149.26,-81.54,-7.5E-02)); +#482731 = VECTOR('',#482732,1.); +#482732 = DIRECTION('',(1.,0.,0.)); +#482733 = PLANE('',#482734); +#482734 = AXIS2_PLACEMENT_3D('',#482735,#482736,#482737); +#482735 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482736 = DIRECTION('',(-0.,-0.,-1.)); +#482737 = DIRECTION('',(-1.,0.,0.)); +#482738 = SHELL_BASED_SURFACE_MODEL('',(#482739)); +#482739 = OPEN_SHELL('',(#482740)); +#482740 = ADVANCED_FACE('',(#482741),#482777,.T.); +#482741 = FACE_BOUND('',#482742,.T.); +#482742 = EDGE_LOOP('',(#482743,#482754,#482762,#482771)); +#482743 = ORIENTED_EDGE('',*,*,#482744,.T.); +#482744 = EDGE_CURVE('',#482745,#482747,#482749,.T.); +#482745 = VERTEX_POINT('',#482746); +#482746 = CARTESIAN_POINT('',(141.172164,-79.82,-7.5E-02)); +#482747 = VERTEX_POINT('',#482748); +#482748 = CARTESIAN_POINT('',(141.172164,-79.7,-7.5E-02)); +#482749 = CIRCLE('',#482750,6.000000000043E-02); +#482750 = AXIS2_PLACEMENT_3D('',#482751,#482752,#482753); +#482751 = CARTESIAN_POINT('',(141.17216377441,-79.76,-7.5E-02)); +#482752 = DIRECTION('',(0.,0.,-1.)); +#482753 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#482754 = ORIENTED_EDGE('',*,*,#482755,.T.); +#482755 = EDGE_CURVE('',#482747,#482756,#482758,.T.); +#482756 = VERTEX_POINT('',#482757); +#482757 = CARTESIAN_POINT('',(141.387836,-79.7,-7.5E-02)); +#482758 = LINE('',#482759,#482760); +#482759 = CARTESIAN_POINT('',(141.172164,-79.7,-7.5E-02)); +#482760 = VECTOR('',#482761,1.); +#482761 = DIRECTION('',(1.,0.,0.)); +#482762 = ORIENTED_EDGE('',*,*,#482763,.T.); +#482763 = EDGE_CURVE('',#482756,#482764,#482766,.T.); +#482764 = VERTEX_POINT('',#482765); +#482765 = CARTESIAN_POINT('',(141.387836,-79.82,-7.5E-02)); +#482766 = CIRCLE('',#482767,6.000000000042E-02); +#482767 = AXIS2_PLACEMENT_3D('',#482768,#482769,#482770); +#482768 = CARTESIAN_POINT('',(141.38783622558,-79.76,-7.5E-02)); +#482769 = DIRECTION('',(0.,0.,-1.)); +#482770 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#482771 = ORIENTED_EDGE('',*,*,#482772,.T.); +#482772 = EDGE_CURVE('',#482764,#482745,#482773,.T.); +#482773 = LINE('',#482774,#482775); +#482774 = CARTESIAN_POINT('',(141.387836,-79.82,-7.5E-02)); +#482775 = VECTOR('',#482776,1.); +#482776 = DIRECTION('',(-1.,0.,0.)); +#482777 = PLANE('',#482778); +#482778 = AXIS2_PLACEMENT_3D('',#482779,#482780,#482781); +#482779 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482780 = DIRECTION('',(-0.,-0.,-1.)); +#482781 = DIRECTION('',(-1.,0.,0.)); +#482782 = SHELL_BASED_SURFACE_MODEL('',(#482783)); +#482783 = OPEN_SHELL('',(#482784)); +#482784 = ADVANCED_FACE('',(#482785),#482821,.T.); +#482785 = FACE_BOUND('',#482786,.T.); +#482786 = EDGE_LOOP('',(#482787,#482798,#482806,#482815)); +#482787 = ORIENTED_EDGE('',*,*,#482788,.T.); +#482788 = EDGE_CURVE('',#482789,#482791,#482793,.T.); +#482789 = VERTEX_POINT('',#482790); +#482790 = CARTESIAN_POINT('',(141.172164,-79.1,-7.5E-02)); +#482791 = VERTEX_POINT('',#482792); +#482792 = CARTESIAN_POINT('',(141.172164,-78.98,-7.5E-02)); +#482793 = CIRCLE('',#482794,6.000000000043E-02); +#482794 = AXIS2_PLACEMENT_3D('',#482795,#482796,#482797); +#482795 = CARTESIAN_POINT('',(141.17216377441,-79.04,-7.5E-02)); +#482796 = DIRECTION('',(0.,0.,-1.)); +#482797 = DIRECTION('',(3.759794253684E-06,-0.999999999993,0.)); +#482798 = ORIENTED_EDGE('',*,*,#482799,.T.); +#482799 = EDGE_CURVE('',#482791,#482800,#482802,.T.); +#482800 = VERTEX_POINT('',#482801); +#482801 = CARTESIAN_POINT('',(141.387836,-78.98,-7.5E-02)); +#482802 = LINE('',#482803,#482804); +#482803 = CARTESIAN_POINT('',(141.172164,-78.98,-7.5E-02)); +#482804 = VECTOR('',#482805,1.); +#482805 = DIRECTION('',(1.,0.,0.)); +#482806 = ORIENTED_EDGE('',*,*,#482807,.T.); +#482807 = EDGE_CURVE('',#482800,#482808,#482810,.T.); +#482808 = VERTEX_POINT('',#482809); +#482809 = CARTESIAN_POINT('',(141.387836,-79.1,-7.5E-02)); +#482810 = CIRCLE('',#482811,6.000000000042E-02); +#482811 = AXIS2_PLACEMENT_3D('',#482812,#482813,#482814); +#482812 = CARTESIAN_POINT('',(141.38783622558,-79.04,-7.5E-02)); +#482813 = DIRECTION('',(0.,0.,-1.)); +#482814 = DIRECTION('',(-3.759794253685E-06,0.999999999993,-0.)); +#482815 = ORIENTED_EDGE('',*,*,#482816,.T.); +#482816 = EDGE_CURVE('',#482808,#482789,#482817,.T.); +#482817 = LINE('',#482818,#482819); +#482818 = CARTESIAN_POINT('',(141.387836,-79.1,-7.5E-02)); +#482819 = VECTOR('',#482820,1.); +#482820 = DIRECTION('',(-1.,0.,0.)); +#482821 = PLANE('',#482822); +#482822 = AXIS2_PLACEMENT_3D('',#482823,#482824,#482825); +#482823 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482824 = DIRECTION('',(-0.,-0.,-1.)); +#482825 = DIRECTION('',(-1.,0.,0.)); +#482826 = SHELL_BASED_SURFACE_MODEL('',(#482827)); +#482827 = OPEN_SHELL('',(#482828)); +#482828 = ADVANCED_FACE('',(#482829),#482898,.T.); +#482829 = FACE_BOUND('',#482830,.T.); +#482830 = EDGE_LOOP('',(#482831,#482842,#482850,#482858,#482867,#482875, + #482884,#482892)); +#482831 = ORIENTED_EDGE('',*,*,#482832,.T.); +#482832 = EDGE_CURVE('',#482833,#482835,#482837,.T.); +#482833 = VERTEX_POINT('',#482834); +#482834 = CARTESIAN_POINT('',(139.634567,-78.474539,-7.5E-02)); +#482835 = VERTEX_POINT('',#482836); +#482836 = CARTESIAN_POINT('',(139.75,-78.4975,-7.5E-02)); +#482837 = CIRCLE('',#482838,6.000007318647E-02); +#482838 = AXIS2_PLACEMENT_3D('',#482839,#482840,#482841); +#482839 = CARTESIAN_POINT('',(139.68999992681,-78.49749982331,-7.5E-02) + ); +#482840 = DIRECTION('',(0.,0.,-1.)); +#482841 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#482842 = ORIENTED_EDGE('',*,*,#482843,.T.); +#482843 = EDGE_CURVE('',#482835,#482844,#482846,.T.); +#482844 = VERTEX_POINT('',#482845); +#482845 = CARTESIAN_POINT('',(139.75,-78.6125,-7.5E-02)); +#482846 = LINE('',#482847,#482848); +#482847 = CARTESIAN_POINT('',(139.75,-78.4975,-7.5E-02)); +#482848 = VECTOR('',#482849,1.); +#482849 = DIRECTION('',(0.,-1.,0.)); +#482850 = ORIENTED_EDGE('',*,*,#482851,.T.); +#482851 = EDGE_CURVE('',#482844,#482852,#482854,.T.); +#482852 = VERTEX_POINT('',#482853); +#482853 = CARTESIAN_POINT('',(140.365,-78.6125,-7.5E-02)); +#482854 = LINE('',#482855,#482856); +#482855 = CARTESIAN_POINT('',(139.75,-78.6125,-7.5E-02)); +#482856 = VECTOR('',#482857,1.); +#482857 = DIRECTION('',(1.,0.,0.)); +#482858 = ORIENTED_EDGE('',*,*,#482859,.T.); +#482859 = EDGE_CURVE('',#482852,#482860,#482862,.T.); +#482860 = VERTEX_POINT('',#482861); +#482861 = CARTESIAN_POINT('',(140.365,-78.7325,-7.5E-02)); +#482862 = CIRCLE('',#482863,6.000000000043E-02); +#482863 = AXIS2_PLACEMENT_3D('',#482864,#482865,#482866); +#482864 = CARTESIAN_POINT('',(140.36500022558,-78.6725,-7.5E-02)); +#482865 = DIRECTION('',(0.,0.,-1.)); +#482866 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#482867 = ORIENTED_EDGE('',*,*,#482868,.T.); +#482868 = EDGE_CURVE('',#482860,#482869,#482871,.T.); +#482869 = VERTEX_POINT('',#482870); +#482870 = CARTESIAN_POINT('',(139.69,-78.7325,-7.5E-02)); +#482871 = LINE('',#482872,#482873); +#482872 = CARTESIAN_POINT('',(140.365,-78.7325,-7.5E-02)); +#482873 = VECTOR('',#482874,1.); +#482874 = DIRECTION('',(-1.,0.,0.)); +#482875 = ORIENTED_EDGE('',*,*,#482876,.T.); +#482876 = EDGE_CURVE('',#482869,#482877,#482879,.T.); +#482877 = VERTEX_POINT('',#482878); +#482878 = CARTESIAN_POINT('',(139.63,-78.6725,-7.5E-02)); +#482879 = CIRCLE('',#482880,5.999932016262E-02); +#482880 = AXIS2_PLACEMENT_3D('',#482881,#482882,#482883); +#482881 = CARTESIAN_POINT('',(139.68999932015,-78.67250067984,-7.5E-02) + ); +#482882 = DIRECTION('',(0.,0.,-1.)); +#482883 = DIRECTION('',(1.133081564772E-05,-0.999999999936,0.)); +#482884 = ORIENTED_EDGE('',*,*,#482885,.T.); +#482885 = EDGE_CURVE('',#482877,#482886,#482888,.T.); +#482886 = VERTEX_POINT('',#482887); +#482887 = CARTESIAN_POINT('',(139.63,-78.4975,-7.5E-02)); +#482888 = LINE('',#482889,#482890); +#482889 = CARTESIAN_POINT('',(139.63,-78.6725,-7.5E-02)); +#482890 = VECTOR('',#482891,1.); +#482891 = DIRECTION('',(0.,1.,0.)); +#482892 = ORIENTED_EDGE('',*,*,#482893,.T.); +#482893 = EDGE_CURVE('',#482886,#482833,#482894,.T.); +#482894 = LINE('',#482895,#482896); +#482895 = CARTESIAN_POINT('',(139.63,-78.4975,-7.5E-02)); +#482896 = VECTOR('',#482897,1.); +#482897 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#482898 = PLANE('',#482899); +#482899 = AXIS2_PLACEMENT_3D('',#482900,#482901,#482902); +#482900 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482901 = DIRECTION('',(-0.,-0.,-1.)); +#482902 = DIRECTION('',(-1.,0.,0.)); +#482903 = SHELL_BASED_SURFACE_MODEL('',(#482904)); +#482904 = OPEN_SHELL('',(#482905)); +#482905 = ADVANCED_FACE('',(#482906),#482975,.T.); +#482906 = FACE_BOUND('',#482907,.T.); +#482907 = EDGE_LOOP('',(#482908,#482919,#482927,#482936,#482944,#482953, + #482961,#482969)); +#482908 = ORIENTED_EDGE('',*,*,#482909,.T.); +#482909 = EDGE_CURVE('',#482910,#482912,#482914,.T.); +#482910 = VERTEX_POINT('',#482911); +#482911 = CARTESIAN_POINT('',(142.854567,-78.474539,-7.5E-02)); +#482912 = VERTEX_POINT('',#482913); +#482913 = CARTESIAN_POINT('',(142.97,-78.4975,-7.5E-02)); +#482914 = CIRCLE('',#482915,6.000007318647E-02); +#482915 = AXIS2_PLACEMENT_3D('',#482916,#482917,#482918); +#482916 = CARTESIAN_POINT('',(142.90999992681,-78.49749982331,-7.5E-02) + ); +#482917 = DIRECTION('',(0.,0.,-1.)); +#482918 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#482919 = ORIENTED_EDGE('',*,*,#482920,.T.); +#482920 = EDGE_CURVE('',#482912,#482921,#482923,.T.); +#482921 = VERTEX_POINT('',#482922); +#482922 = CARTESIAN_POINT('',(142.97,-78.6725,-7.5E-02)); +#482923 = LINE('',#482924,#482925); +#482924 = CARTESIAN_POINT('',(142.97,-78.4975,-7.5E-02)); +#482925 = VECTOR('',#482926,1.); +#482926 = DIRECTION('',(0.,-1.,0.)); +#482927 = ORIENTED_EDGE('',*,*,#482928,.T.); +#482928 = EDGE_CURVE('',#482921,#482929,#482931,.T.); +#482929 = VERTEX_POINT('',#482930); +#482930 = CARTESIAN_POINT('',(142.91,-78.7325,-7.5E-02)); +#482931 = CIRCLE('',#482932,5.999932016265E-02); +#482932 = AXIS2_PLACEMENT_3D('',#482933,#482934,#482935); +#482933 = CARTESIAN_POINT('',(142.91000067984,-78.67250067984,-7.5E-02) + ); +#482934 = DIRECTION('',(0.,0.,-1.)); +#482935 = DIRECTION('',(0.999999999936,1.133081517401E-05,0.)); +#482936 = ORIENTED_EDGE('',*,*,#482937,.T.); +#482937 = EDGE_CURVE('',#482929,#482938,#482940,.T.); +#482938 = VERTEX_POINT('',#482939); +#482939 = CARTESIAN_POINT('',(142.235,-78.7325,-7.5E-02)); +#482940 = LINE('',#482941,#482942); +#482941 = CARTESIAN_POINT('',(142.91,-78.7325,-7.5E-02)); +#482942 = VECTOR('',#482943,1.); +#482943 = DIRECTION('',(-1.,0.,0.)); +#482944 = ORIENTED_EDGE('',*,*,#482945,.T.); +#482945 = EDGE_CURVE('',#482938,#482946,#482948,.T.); +#482946 = VERTEX_POINT('',#482947); +#482947 = CARTESIAN_POINT('',(142.235,-78.6125,-7.5E-02)); +#482948 = CIRCLE('',#482949,6.000000000043E-02); +#482949 = AXIS2_PLACEMENT_3D('',#482950,#482951,#482952); +#482950 = CARTESIAN_POINT('',(142.23499977441,-78.6725,-7.5E-02)); +#482951 = DIRECTION('',(0.,0.,-1.)); +#482952 = DIRECTION('',(3.759794253683E-06,-0.999999999993,0.)); +#482953 = ORIENTED_EDGE('',*,*,#482954,.T.); +#482954 = EDGE_CURVE('',#482946,#482955,#482957,.T.); +#482955 = VERTEX_POINT('',#482956); +#482956 = CARTESIAN_POINT('',(142.85,-78.6125,-7.5E-02)); +#482957 = LINE('',#482958,#482959); +#482958 = CARTESIAN_POINT('',(142.235,-78.6125,-7.5E-02)); +#482959 = VECTOR('',#482960,1.); +#482960 = DIRECTION('',(1.,0.,0.)); +#482961 = ORIENTED_EDGE('',*,*,#482962,.T.); +#482962 = EDGE_CURVE('',#482955,#482963,#482965,.T.); +#482963 = VERTEX_POINT('',#482964); +#482964 = CARTESIAN_POINT('',(142.85,-78.4975,-7.5E-02)); +#482965 = LINE('',#482966,#482967); +#482966 = CARTESIAN_POINT('',(142.85,-78.6125,-7.5E-02)); +#482967 = VECTOR('',#482968,1.); +#482968 = DIRECTION('',(0.,1.,0.)); +#482969 = ORIENTED_EDGE('',*,*,#482970,.T.); +#482970 = EDGE_CURVE('',#482963,#482910,#482971,.T.); +#482971 = LINE('',#482972,#482973); +#482972 = CARTESIAN_POINT('',(142.85,-78.4975,-7.5E-02)); +#482973 = VECTOR('',#482974,1.); +#482974 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#482975 = PLANE('',#482976); +#482976 = AXIS2_PLACEMENT_3D('',#482977,#482978,#482979); +#482977 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#482978 = DIRECTION('',(-0.,-0.,-1.)); +#482979 = DIRECTION('',(-1.,0.,0.)); +#482980 = SHELL_BASED_SURFACE_MODEL('',(#482981)); +#482981 = OPEN_SHELL('',(#482982)); +#482982 = ADVANCED_FACE('',(#482983),#483255,.T.); +#482983 = FACE_BOUND('',#482984,.T.); +#482984 = EDGE_LOOP('',(#482985,#482996,#483004,#483012,#483020,#483028, + #483036,#483044,#483052,#483060,#483068,#483076,#483085,#483093, + #483101,#483109,#483117,#483125,#483133,#483142,#483150,#483159, + #483167,#483175,#483183,#483192,#483200,#483209,#483217,#483225, + #483233,#483241,#483249)); +#482985 = ORIENTED_EDGE('',*,*,#482986,.T.); +#482986 = EDGE_CURVE('',#482987,#482989,#482991,.T.); +#482987 = VERTEX_POINT('',#482988); +#482988 = CARTESIAN_POINT('',(149.80922,-76.439775,-7.5E-02)); +#482989 = VERTEX_POINT('',#482990); +#482990 = CARTESIAN_POINT('',(149.75587,-76.300356,-7.5E-02)); +#482991 = CIRCLE('',#482992,7.500005272363E-02); +#482992 = AXIS2_PLACEMENT_3D('',#482993,#482994,#482995); +#482993 = CARTESIAN_POINT('',(149.78941055676,-76.36743832972,-7.5E-02) + ); +#482994 = DIRECTION('',(0.,0.,-1.)); +#482995 = DIRECTION('',(0.264125724195,-0.964488259036,0.)); +#482996 = ORIENTED_EDGE('',*,*,#482997,.T.); +#482997 = EDGE_CURVE('',#482989,#482998,#483000,.T.); +#482998 = VERTEX_POINT('',#482999); +#482999 = CARTESIAN_POINT('',(149.870017,-76.24626,-7.5E-02)); +#483000 = LINE('',#483001,#483002); +#483001 = CARTESIAN_POINT('',(149.75587,-76.300356,-7.5E-02)); +#483002 = VECTOR('',#483003,1.); +#483003 = DIRECTION('',(0.903657062662,0.428256830769,0.)); +#483004 = ORIENTED_EDGE('',*,*,#483005,.T.); +#483005 = EDGE_CURVE('',#482998,#483006,#483008,.T.); +#483006 = VERTEX_POINT('',#483007); +#483007 = CARTESIAN_POINT('',(150.034911,-76.245548,-7.5E-02)); +#483008 = LINE('',#483009,#483010); +#483009 = CARTESIAN_POINT('',(149.870017,-76.24626,-7.5E-02)); +#483010 = VECTOR('',#483011,1.); +#483011 = DIRECTION('',(0.99999067789,4.317885203009E-03,0.)); +#483012 = ORIENTED_EDGE('',*,*,#483013,.T.); +#483013 = EDGE_CURVE('',#483006,#483014,#483016,.T.); +#483014 = VERTEX_POINT('',#483015); +#483015 = CARTESIAN_POINT('',(150.212031,-76.305078,-7.5E-02)); +#483016 = LINE('',#483017,#483018); +#483017 = CARTESIAN_POINT('',(150.034911,-76.245548,-7.5E-02)); +#483018 = VECTOR('',#483019,1.); +#483019 = DIRECTION('',(0.947893661994,-0.318586888542,0.)); +#483020 = ORIENTED_EDGE('',*,*,#483021,.T.); +#483021 = EDGE_CURVE('',#483014,#483022,#483024,.T.); +#483022 = VERTEX_POINT('',#483023); +#483023 = CARTESIAN_POINT('',(150.32872,-76.42284,-7.5E-02)); +#483024 = LINE('',#483025,#483026); +#483025 = CARTESIAN_POINT('',(150.212031,-76.305078,-7.5E-02)); +#483026 = VECTOR('',#483027,1.); +#483027 = DIRECTION('',(0.703863230025,-0.710335521721,0.)); +#483028 = ORIENTED_EDGE('',*,*,#483029,.T.); +#483029 = EDGE_CURVE('',#483022,#483030,#483032,.T.); +#483030 = VERTEX_POINT('',#483031); +#483031 = CARTESIAN_POINT('',(150.385981,-76.539724,-7.5E-02)); +#483032 = LINE('',#483033,#483034); +#483033 = CARTESIAN_POINT('',(150.32872,-76.42284,-7.5E-02)); +#483034 = VECTOR('',#483035,1.); +#483035 = DIRECTION('',(0.439939908708,-0.8980272138,0.)); +#483036 = ORIENTED_EDGE('',*,*,#483037,.T.); +#483037 = EDGE_CURVE('',#483030,#483038,#483040,.T.); +#483038 = VERTEX_POINT('',#483039); +#483039 = CARTESIAN_POINT('',(150.435839,-76.74839,-7.5E-02)); +#483040 = LINE('',#483041,#483042); +#483041 = CARTESIAN_POINT('',(150.385981,-76.539724,-7.5E-02)); +#483042 = VECTOR('',#483043,1.); +#483043 = DIRECTION('',(0.232395123349,-0.972621461126,0.)); +#483044 = ORIENTED_EDGE('',*,*,#483045,.T.); +#483045 = EDGE_CURVE('',#483038,#483046,#483048,.T.); +#483046 = VERTEX_POINT('',#483047); +#483047 = CARTESIAN_POINT('',(150.4336,-76.909437,-7.5E-02)); +#483048 = LINE('',#483049,#483050); +#483049 = CARTESIAN_POINT('',(150.435839,-76.74839,-7.5E-02)); +#483050 = VECTOR('',#483051,1.); +#483051 = DIRECTION('',(-1.39014303055E-02,-0.999903370449,0.)); +#483052 = ORIENTED_EDGE('',*,*,#483053,.T.); +#483053 = EDGE_CURVE('',#483046,#483054,#483056,.T.); +#483054 = VERTEX_POINT('',#483055); +#483055 = CARTESIAN_POINT('',(150.380302,-77.115264,-7.5E-02)); +#483056 = LINE('',#483057,#483058); +#483057 = CARTESIAN_POINT('',(150.4336,-76.909437,-7.5E-02)); +#483058 = VECTOR('',#483059,1.); +#483059 = DIRECTION('',(-0.250677645339,-0.968070616292,0.)); +#483060 = ORIENTED_EDGE('',*,*,#483061,.T.); +#483061 = EDGE_CURVE('',#483054,#483062,#483064,.T.); +#483062 = VERTEX_POINT('',#483063); +#483063 = CARTESIAN_POINT('',(150.360916,-77.152359,-7.5E-02)); +#483064 = LINE('',#483065,#483066); +#483065 = CARTESIAN_POINT('',(150.380302,-77.115264,-7.5E-02)); +#483066 = VECTOR('',#483067,1.); +#483067 = DIRECTION('',(-0.463168487089,-0.886270248044,0.)); +#483068 = ORIENTED_EDGE('',*,*,#483069,.T.); +#483069 = EDGE_CURVE('',#483062,#483070,#483072,.T.); +#483070 = VERTEX_POINT('',#483071); +#483071 = CARTESIAN_POINT('',(150.356494,-77.153545,-7.5E-02)); +#483072 = LINE('',#483073,#483074); +#483073 = CARTESIAN_POINT('',(150.360916,-77.152359,-7.5E-02)); +#483074 = VECTOR('',#483075,1.); +#483075 = DIRECTION('',(-0.965864167123,-0.2590490507,0.)); +#483076 = ORIENTED_EDGE('',*,*,#483077,.T.); +#483077 = EDGE_CURVE('',#483070,#483078,#483080,.T.); +#483078 = VERTEX_POINT('',#483079); +#483079 = CARTESIAN_POINT('',(150.154542,-77.354765,-7.5E-02)); +#483080 = CIRCLE('',#483081,0.373702218251); +#483081 = AXIS2_PLACEMENT_3D('',#483082,#483083,#483084); +#483082 = CARTESIAN_POINT('',(150.4993432402,-77.49886722995,-7.5E-02)); +#483083 = DIRECTION('',(0.,0.,1.)); +#483084 = DIRECTION('',(-0.382254193933,0.924057212093,0.)); +#483085 = ORIENTED_EDGE('',*,*,#483086,.T.); +#483086 = EDGE_CURVE('',#483078,#483087,#483089,.T.); +#483087 = VERTEX_POINT('',#483088); +#483088 = CARTESIAN_POINT('',(150.034911,-77.394089,-7.5E-02)); +#483089 = LINE('',#483090,#483091); +#483090 = CARTESIAN_POINT('',(150.154542,-77.354765,-7.5E-02)); +#483091 = VECTOR('',#483092,1.); +#483092 = DIRECTION('',(-0.949992481075,-0.312272774831,0.)); +#483093 = ORIENTED_EDGE('',*,*,#483094,.T.); +#483094 = EDGE_CURVE('',#483087,#483095,#483097,.T.); +#483095 = VERTEX_POINT('',#483096); +#483096 = CARTESIAN_POINT('',(149.915805,-77.392619,-7.5E-02)); +#483097 = LINE('',#483098,#483099); +#483098 = CARTESIAN_POINT('',(150.034911,-77.394089,-7.5E-02)); +#483099 = VECTOR('',#483100,1.); +#483100 = DIRECTION('',(-0.999923846866,1.234100763094E-02,0.)); +#483101 = ORIENTED_EDGE('',*,*,#483102,.T.); +#483102 = EDGE_CURVE('',#483095,#483103,#483105,.T.); +#483103 = VERTEX_POINT('',#483104); +#483104 = CARTESIAN_POINT('',(149.747743,-77.33456,-7.5E-02)); +#483105 = LINE('',#483106,#483107); +#483106 = CARTESIAN_POINT('',(149.915805,-77.392619,-7.5E-02)); +#483107 = VECTOR('',#483108,1.); +#483108 = DIRECTION('',(-0.945188091034,0.326526373465,0.)); +#483109 = ORIENTED_EDGE('',*,*,#483110,.T.); +#483110 = EDGE_CURVE('',#483103,#483111,#483113,.T.); +#483111 = VERTEX_POINT('',#483112); +#483112 = CARTESIAN_POINT('',(149.679431,-77.266247,-7.5E-02)); +#483113 = LINE('',#483114,#483115); +#483114 = CARTESIAN_POINT('',(149.747743,-77.33456,-7.5E-02)); +#483115 = VECTOR('',#483116,1.); +#483116 = DIRECTION('',(-0.707101605638,0.707111956697,0.)); +#483117 = ORIENTED_EDGE('',*,*,#483118,.T.); +#483118 = EDGE_CURVE('',#483111,#483119,#483121,.T.); +#483119 = VERTEX_POINT('',#483120); +#483120 = CARTESIAN_POINT('',(149.666792,-77.22458,-7.5E-02)); +#483121 = LINE('',#483122,#483123); +#483122 = CARTESIAN_POINT('',(149.679431,-77.266247,-7.5E-02)); +#483123 = VECTOR('',#483124,1.); +#483124 = DIRECTION('',(-0.29027318861,0.956943820699,0.)); +#483125 = ORIENTED_EDGE('',*,*,#483126,.T.); +#483126 = EDGE_CURVE('',#483119,#483127,#483129,.T.); +#483127 = VERTEX_POINT('',#483128); +#483128 = CARTESIAN_POINT('',(149.668233,-76.876615,-7.5E-02)); +#483129 = LINE('',#483130,#483131); +#483130 = CARTESIAN_POINT('',(149.666792,-77.22458,-7.5E-02)); +#483131 = VECTOR('',#483132,1.); +#483132 = DIRECTION('',(4.141185589904E-03,0.999991425254,0.)); +#483133 = ORIENTED_EDGE('',*,*,#483134,.T.); +#483134 = EDGE_CURVE('',#483127,#483135,#483137,.T.); +#483135 = VERTEX_POINT('',#483136); +#483136 = CARTESIAN_POINT('',(149.741792,-76.816247,-7.5E-02)); +#483137 = CIRCLE('',#483138,7.500074938989E-02); +#483138 = AXIS2_PLACEMENT_3D('',#483139,#483140,#483141); +#483139 = CARTESIAN_POINT('',(149.74179246611,-76.89124774938,-7.5E-02) + ); +#483140 = DIRECTION('',(0.,0.,-1.)); +#483141 = DIRECTION('',(-0.980783081614,0.195101375753,0.)); +#483142 = ORIENTED_EDGE('',*,*,#483143,.T.); +#483143 = EDGE_CURVE('',#483135,#483144,#483146,.T.); +#483144 = VERTEX_POINT('',#483145); +#483145 = CARTESIAN_POINT('',(149.9469,-76.817688,-7.5E-02)); +#483146 = LINE('',#483147,#483148); +#483147 = CARTESIAN_POINT('',(149.741792,-76.816247,-7.5E-02)); +#483148 = VECTOR('',#483149,1.); +#483149 = DIRECTION('',(0.999975321618,-7.025393638721E-03,0.)); +#483150 = ORIENTED_EDGE('',*,*,#483151,.T.); +#483151 = EDGE_CURVE('',#483144,#483152,#483154,.T.); +#483152 = VERTEX_POINT('',#483153); +#483153 = CARTESIAN_POINT('',(149.932268,-76.966247,-7.5E-02)); +#483154 = CIRCLE('',#483155,7.500006711463E-02); +#483155 = AXIS2_PLACEMENT_3D('',#483156,#483157,#483158); +#483156 = CARTESIAN_POINT('',(149.93226806711,-76.89124693288,-7.5E-02) + ); +#483157 = DIRECTION('',(0.,0.,-1.)); +#483158 = DIRECTION('',(0.195092263891,0.980784894138,0.)); +#483159 = ORIENTED_EDGE('',*,*,#483160,.T.); +#483160 = EDGE_CURVE('',#483152,#483161,#483163,.T.); +#483161 = VERTEX_POINT('',#483162); +#483162 = CARTESIAN_POINT('',(149.816792,-76.966247,-7.5E-02)); +#483163 = LINE('',#483164,#483165); +#483164 = CARTESIAN_POINT('',(149.932268,-76.966247,-7.5E-02)); +#483165 = VECTOR('',#483166,1.); +#483166 = DIRECTION('',(-1.,0.,0.)); +#483167 = ORIENTED_EDGE('',*,*,#483168,.T.); +#483168 = EDGE_CURVE('',#483161,#483169,#483171,.T.); +#483169 = VERTEX_POINT('',#483170); +#483170 = CARTESIAN_POINT('',(149.816792,-77.193514,-7.5E-02)); +#483171 = LINE('',#483172,#483173); +#483172 = CARTESIAN_POINT('',(149.816792,-76.966247,-7.5E-02)); +#483173 = VECTOR('',#483174,1.); +#483174 = DIRECTION('',(0.,-1.,0.)); +#483175 = ORIENTED_EDGE('',*,*,#483176,.T.); +#483176 = EDGE_CURVE('',#483169,#483177,#483179,.T.); +#483177 = VERTEX_POINT('',#483178); +#483178 = CARTESIAN_POINT('',(149.829925,-77.206648,-7.5E-02)); +#483179 = LINE('',#483180,#483181); +#483180 = CARTESIAN_POINT('',(149.816792,-77.193514,-7.5E-02)); +#483181 = VECTOR('',#483182,1.); +#483182 = DIRECTION('',(0.707079860707,-0.707133700641,0.)); +#483183 = ORIENTED_EDGE('',*,*,#483184,.T.); +#483184 = EDGE_CURVE('',#483177,#483185,#483187,.T.); +#483185 = VERTEX_POINT('',#483186); +#483186 = CARTESIAN_POINT('',(150.129849,-77.206647,-7.5E-02)); +#483187 = CIRCLE('',#483188,0.299305962385); +#483188 = AXIS2_PLACEMENT_3D('',#483189,#483190,#483191); +#483189 = CARTESIAN_POINT('',(149.97988613635,-76.94761959093,-7.5E-02) + ); +#483190 = DIRECTION('',(0.,0.,1.)); +#483191 = DIRECTION('',(-0.501029565732,-0.865430167178,0.)); +#483192 = ORIENTED_EDGE('',*,*,#483193,.T.); +#483193 = EDGE_CURVE('',#483185,#483194,#483196,.T.); +#483194 = VERTEX_POINT('',#483195); +#483195 = CARTESIAN_POINT('',(150.203961,-77.132534,-7.5E-02)); +#483196 = LINE('',#483197,#483198); +#483197 = CARTESIAN_POINT('',(150.129849,-77.206647,-7.5E-02)); +#483198 = VECTOR('',#483199,1.); +#483199 = DIRECTION('',(0.707102010674,0.707111551667,0.)); +#483200 = ORIENTED_EDGE('',*,*,#483201,.T.); +#483201 = EDGE_CURVE('',#483194,#483202,#483204,.T.); +#483202 = VERTEX_POINT('',#483203); +#483203 = CARTESIAN_POINT('',(150.285839,-76.757624,-7.5E-02)); +#483204 = CIRCLE('',#483205,0.611719141131); +#483205 = AXIS2_PLACEMENT_3D('',#483206,#483207,#483208); +#483206 = CARTESIAN_POINT('',(149.67742696224,-76.82114643649,-7.5E-02) + ); +#483207 = DIRECTION('',(0.,0.,1.)); +#483208 = DIRECTION('',(0.860744747637,-0.509036815383,0.)); +#483209 = ORIENTED_EDGE('',*,*,#483210,.T.); +#483210 = EDGE_CURVE('',#483202,#483211,#483213,.T.); +#483211 = VERTEX_POINT('',#483212); +#483212 = CARTESIAN_POINT('',(150.242455,-76.58409,-7.5E-02)); +#483213 = LINE('',#483214,#483215); +#483214 = CARTESIAN_POINT('',(150.285839,-76.757624,-7.5E-02)); +#483215 = VECTOR('',#483216,1.); +#483216 = DIRECTION('',(-0.242538255859,0.970141842436,0.)); +#483217 = ORIENTED_EDGE('',*,*,#483218,.T.); +#483218 = EDGE_CURVE('',#483211,#483219,#483221,.T.); +#483219 = VERTEX_POINT('',#483220); +#483220 = CARTESIAN_POINT('',(150.203962,-76.507103,-7.5E-02)); +#483221 = LINE('',#483222,#483223); +#483222 = CARTESIAN_POINT('',(150.242455,-76.58409,-7.5E-02)); +#483223 = VECTOR('',#483224,1.); +#483224 = DIRECTION('',(-0.447208948322,0.894429514574,0.)); +#483225 = ORIENTED_EDGE('',*,*,#483226,.T.); +#483226 = EDGE_CURVE('',#483219,#483227,#483229,.T.); +#483227 = VERTEX_POINT('',#483228); +#483228 = CARTESIAN_POINT('',(150.129849,-76.43299,-7.5E-02)); +#483229 = LINE('',#483230,#483231); +#483230 = CARTESIAN_POINT('',(150.203962,-76.507103,-7.5E-02)); +#483231 = VECTOR('',#483232,1.); +#483232 = DIRECTION('',(-0.707106781186,0.707106781187,0.)); +#483233 = ORIENTED_EDGE('',*,*,#483234,.T.); +#483234 = EDGE_CURVE('',#483227,#483235,#483237,.T.); +#483235 = VERTEX_POINT('',#483236); +#483236 = CARTESIAN_POINT('',(150.015336,-76.394819,-7.5E-02)); +#483237 = LINE('',#483238,#483239); +#483238 = CARTESIAN_POINT('',(150.129849,-76.43299,-7.5E-02)); +#483239 = VECTOR('',#483240,1.); +#483240 = DIRECTION('',(-0.948683298051,0.316227766017,0.)); +#483241 = ORIENTED_EDGE('',*,*,#483242,.T.); +#483242 = EDGE_CURVE('',#483235,#483243,#483245,.T.); +#483243 = VERTEX_POINT('',#483244); +#483244 = CARTESIAN_POINT('',(149.902354,-76.394819,-7.5E-02)); +#483245 = LINE('',#483246,#483247); +#483246 = CARTESIAN_POINT('',(150.015336,-76.394819,-7.5E-02)); +#483247 = VECTOR('',#483248,1.); +#483248 = DIRECTION('',(-1.,0.,0.)); +#483249 = ORIENTED_EDGE('',*,*,#483250,.T.); +#483250 = EDGE_CURVE('',#483243,#482987,#483251,.T.); +#483251 = LINE('',#483252,#483253); +#483252 = CARTESIAN_POINT('',(149.902354,-76.394819,-7.5E-02)); +#483253 = VECTOR('',#483254,1.); +#483254 = DIRECTION('',(-0.900571478219,-0.43470796245,0.)); +#483255 = PLANE('',#483256); +#483256 = AXIS2_PLACEMENT_3D('',#483257,#483258,#483259); +#483257 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483258 = DIRECTION('',(-0.,-0.,-1.)); +#483259 = DIRECTION('',(-1.,0.,0.)); +#483260 = SHELL_BASED_SURFACE_MODEL('',(#483261)); +#483261 = OPEN_SHELL('',(#483262)); +#483262 = ADVANCED_FACE('',(#483263),#483307,.T.); +#483263 = FACE_BOUND('',#483264,.T.); +#483264 = EDGE_LOOP('',(#483265,#483276,#483284,#483293,#483301)); +#483265 = ORIENTED_EDGE('',*,*,#483266,.T.); +#483266 = EDGE_CURVE('',#483267,#483269,#483271,.T.); +#483267 = VERTEX_POINT('',#483268); +#483268 = CARTESIAN_POINT('',(136.834567,-77.011459,-7.5E-02)); +#483269 = VERTEX_POINT('',#483270); +#483270 = CARTESIAN_POINT('',(136.95,-77.03442,-7.5E-02)); +#483271 = CIRCLE('',#483272,6.000007318647E-02); +#483272 = AXIS2_PLACEMENT_3D('',#483273,#483274,#483275); +#483273 = CARTESIAN_POINT('',(136.88999992681,-77.03441982331,-7.5E-02) + ); +#483274 = DIRECTION('',(0.,0.,-1.)); +#483275 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483276 = ORIENTED_EDGE('',*,*,#483277,.T.); +#483277 = EDGE_CURVE('',#483269,#483278,#483280,.T.); +#483278 = VERTEX_POINT('',#483279); +#483279 = CARTESIAN_POINT('',(136.95,-77.31558,-7.5E-02)); +#483280 = LINE('',#483281,#483282); +#483281 = CARTESIAN_POINT('',(136.95,-77.03442,-7.5E-02)); +#483282 = VECTOR('',#483283,1.); +#483283 = DIRECTION('',(0.,-1.,0.)); +#483284 = ORIENTED_EDGE('',*,*,#483285,.T.); +#483285 = EDGE_CURVE('',#483278,#483286,#483288,.T.); +#483286 = VERTEX_POINT('',#483287); +#483287 = CARTESIAN_POINT('',(136.83,-77.31558,-7.5E-02)); +#483288 = CIRCLE('',#483289,6.00000000004E-02); +#483289 = AXIS2_PLACEMENT_3D('',#483290,#483291,#483292); +#483290 = CARTESIAN_POINT('',(136.89,-77.31558022558,-7.5E-02)); +#483291 = DIRECTION('',(0.,0.,-1.)); +#483292 = DIRECTION('',(0.999999999993,3.759794727381E-06,0.)); +#483293 = ORIENTED_EDGE('',*,*,#483294,.T.); +#483294 = EDGE_CURVE('',#483286,#483295,#483297,.T.); +#483295 = VERTEX_POINT('',#483296); +#483296 = CARTESIAN_POINT('',(136.83,-77.03442,-7.5E-02)); +#483297 = LINE('',#483298,#483299); +#483298 = CARTESIAN_POINT('',(136.83,-77.31558,-7.5E-02)); +#483299 = VECTOR('',#483300,1.); +#483300 = DIRECTION('',(0.,1.,0.)); +#483301 = ORIENTED_EDGE('',*,*,#483302,.T.); +#483302 = EDGE_CURVE('',#483295,#483267,#483303,.T.); +#483303 = LINE('',#483304,#483305); +#483304 = CARTESIAN_POINT('',(136.83,-77.03442,-7.5E-02)); +#483305 = VECTOR('',#483306,1.); +#483306 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#483307 = PLANE('',#483308); +#483308 = AXIS2_PLACEMENT_3D('',#483309,#483310,#483311); +#483309 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483310 = DIRECTION('',(-0.,-0.,-1.)); +#483311 = DIRECTION('',(-1.,0.,0.)); +#483312 = SHELL_BASED_SURFACE_MODEL('',(#483313)); +#483313 = OPEN_SHELL('',(#483314)); +#483314 = ADVANCED_FACE('',(#483315),#483359,.T.); +#483315 = FACE_BOUND('',#483316,.T.); +#483316 = EDGE_LOOP('',(#483317,#483328,#483336,#483345,#483353)); +#483317 = ORIENTED_EDGE('',*,*,#483318,.T.); +#483318 = EDGE_CURVE('',#483319,#483321,#483323,.T.); +#483319 = VERTEX_POINT('',#483320); +#483320 = CARTESIAN_POINT('',(137.854567,-77.011459,-7.5E-02)); +#483321 = VERTEX_POINT('',#483322); +#483322 = CARTESIAN_POINT('',(137.97,-77.03442,-7.5E-02)); +#483323 = CIRCLE('',#483324,6.000007318647E-02); +#483324 = AXIS2_PLACEMENT_3D('',#483325,#483326,#483327); +#483325 = CARTESIAN_POINT('',(137.90999992681,-77.03441982331,-7.5E-02) + ); +#483326 = DIRECTION('',(0.,0.,-1.)); +#483327 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483328 = ORIENTED_EDGE('',*,*,#483329,.T.); +#483329 = EDGE_CURVE('',#483321,#483330,#483332,.T.); +#483330 = VERTEX_POINT('',#483331); +#483331 = CARTESIAN_POINT('',(137.97,-77.31558,-7.5E-02)); +#483332 = LINE('',#483333,#483334); +#483333 = CARTESIAN_POINT('',(137.97,-77.03442,-7.5E-02)); +#483334 = VECTOR('',#483335,1.); +#483335 = DIRECTION('',(0.,-1.,0.)); +#483336 = ORIENTED_EDGE('',*,*,#483337,.T.); +#483337 = EDGE_CURVE('',#483330,#483338,#483340,.T.); +#483338 = VERTEX_POINT('',#483339); +#483339 = CARTESIAN_POINT('',(137.85,-77.31558,-7.5E-02)); +#483340 = CIRCLE('',#483341,6.000000000042E-02); +#483341 = AXIS2_PLACEMENT_3D('',#483342,#483343,#483344); +#483342 = CARTESIAN_POINT('',(137.91,-77.31558022558,-7.5E-02)); +#483343 = DIRECTION('',(0.,0.,-1.)); +#483344 = DIRECTION('',(0.999999999993,3.759794490531E-06,0.)); +#483345 = ORIENTED_EDGE('',*,*,#483346,.T.); +#483346 = EDGE_CURVE('',#483338,#483347,#483349,.T.); +#483347 = VERTEX_POINT('',#483348); +#483348 = CARTESIAN_POINT('',(137.85,-77.03442,-7.5E-02)); +#483349 = LINE('',#483350,#483351); +#483350 = CARTESIAN_POINT('',(137.85,-77.31558,-7.5E-02)); +#483351 = VECTOR('',#483352,1.); +#483352 = DIRECTION('',(0.,1.,0.)); +#483353 = ORIENTED_EDGE('',*,*,#483354,.T.); +#483354 = EDGE_CURVE('',#483347,#483319,#483355,.T.); +#483355 = LINE('',#483356,#483357); +#483356 = CARTESIAN_POINT('',(137.85,-77.03442,-7.5E-02)); +#483357 = VECTOR('',#483358,1.); +#483358 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#483359 = PLANE('',#483360); +#483360 = AXIS2_PLACEMENT_3D('',#483361,#483362,#483363); +#483361 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483362 = DIRECTION('',(-0.,-0.,-1.)); +#483363 = DIRECTION('',(-1.,0.,0.)); +#483364 = SHELL_BASED_SURFACE_MODEL('',(#483365)); +#483365 = OPEN_SHELL('',(#483366)); +#483366 = ADVANCED_FACE('',(#483367),#483411,.T.); +#483367 = FACE_BOUND('',#483368,.T.); +#483368 = EDGE_LOOP('',(#483369,#483380,#483388,#483397,#483405)); +#483369 = ORIENTED_EDGE('',*,*,#483370,.T.); +#483370 = EDGE_CURVE('',#483371,#483373,#483375,.T.); +#483371 = VERTEX_POINT('',#483372); +#483372 = CARTESIAN_POINT('',(138.384567,-77.044203,-7.5E-02)); +#483373 = VERTEX_POINT('',#483374); +#483374 = CARTESIAN_POINT('',(138.5,-77.067164,-7.5E-02)); +#483375 = CIRCLE('',#483376,6.000007318647E-02); +#483376 = AXIS2_PLACEMENT_3D('',#483377,#483378,#483379); +#483377 = CARTESIAN_POINT('',(138.43999992681,-77.06716382331,-7.5E-02) + ); +#483378 = DIRECTION('',(0.,0.,-1.)); +#483379 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483380 = ORIENTED_EDGE('',*,*,#483381,.T.); +#483381 = EDGE_CURVE('',#483373,#483382,#483384,.T.); +#483382 = VERTEX_POINT('',#483383); +#483383 = CARTESIAN_POINT('',(138.5,-77.282836,-7.5E-02)); +#483384 = LINE('',#483385,#483386); +#483385 = CARTESIAN_POINT('',(138.5,-77.067164,-7.5E-02)); +#483386 = VECTOR('',#483387,1.); +#483387 = DIRECTION('',(0.,-1.,0.)); +#483388 = ORIENTED_EDGE('',*,*,#483389,.T.); +#483389 = EDGE_CURVE('',#483382,#483390,#483392,.T.); +#483390 = VERTEX_POINT('',#483391); +#483391 = CARTESIAN_POINT('',(138.38,-77.282836,-7.5E-02)); +#483392 = CIRCLE('',#483393,6.000000000043E-02); +#483393 = AXIS2_PLACEMENT_3D('',#483394,#483395,#483396); +#483394 = CARTESIAN_POINT('',(138.44,-77.28283622558,-7.5E-02)); +#483395 = DIRECTION('',(0.,0.,-1.)); +#483396 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#483397 = ORIENTED_EDGE('',*,*,#483398,.T.); +#483398 = EDGE_CURVE('',#483390,#483399,#483401,.T.); +#483399 = VERTEX_POINT('',#483400); +#483400 = CARTESIAN_POINT('',(138.38,-77.067164,-7.5E-02)); +#483401 = LINE('',#483402,#483403); +#483402 = CARTESIAN_POINT('',(138.38,-77.282836,-7.5E-02)); +#483403 = VECTOR('',#483404,1.); +#483404 = DIRECTION('',(0.,1.,0.)); +#483405 = ORIENTED_EDGE('',*,*,#483406,.T.); +#483406 = EDGE_CURVE('',#483399,#483371,#483407,.T.); +#483407 = LINE('',#483408,#483409); +#483408 = CARTESIAN_POINT('',(138.38,-77.067164,-7.5E-02)); +#483409 = VECTOR('',#483410,1.); +#483410 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#483411 = PLANE('',#483412); +#483412 = AXIS2_PLACEMENT_3D('',#483413,#483414,#483415); +#483413 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483414 = DIRECTION('',(-0.,-0.,-1.)); +#483415 = DIRECTION('',(-1.,0.,0.)); +#483416 = SHELL_BASED_SURFACE_MODEL('',(#483417)); +#483417 = OPEN_SHELL('',(#483418)); +#483418 = ADVANCED_FACE('',(#483419),#483463,.T.); +#483419 = FACE_BOUND('',#483420,.T.); +#483420 = EDGE_LOOP('',(#483421,#483432,#483440,#483449,#483457)); +#483421 = ORIENTED_EDGE('',*,*,#483422,.T.); +#483422 = EDGE_CURVE('',#483423,#483425,#483427,.T.); +#483423 = VERTEX_POINT('',#483424); +#483424 = CARTESIAN_POINT('',(139.104567,-77.044203,-7.5E-02)); +#483425 = VERTEX_POINT('',#483426); +#483426 = CARTESIAN_POINT('',(139.22,-77.067164,-7.5E-02)); +#483427 = CIRCLE('',#483428,6.000007318647E-02); +#483428 = AXIS2_PLACEMENT_3D('',#483429,#483430,#483431); +#483429 = CARTESIAN_POINT('',(139.15999992681,-77.06716382331,-7.5E-02) + ); +#483430 = DIRECTION('',(0.,0.,-1.)); +#483431 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483432 = ORIENTED_EDGE('',*,*,#483433,.T.); +#483433 = EDGE_CURVE('',#483425,#483434,#483436,.T.); +#483434 = VERTEX_POINT('',#483435); +#483435 = CARTESIAN_POINT('',(139.22,-77.282836,-7.5E-02)); +#483436 = LINE('',#483437,#483438); +#483437 = CARTESIAN_POINT('',(139.22,-77.067164,-7.5E-02)); +#483438 = VECTOR('',#483439,1.); +#483439 = DIRECTION('',(0.,-1.,0.)); +#483440 = ORIENTED_EDGE('',*,*,#483441,.T.); +#483441 = EDGE_CURVE('',#483434,#483442,#483444,.T.); +#483442 = VERTEX_POINT('',#483443); +#483443 = CARTESIAN_POINT('',(139.1,-77.282836,-7.5E-02)); +#483444 = CIRCLE('',#483445,6.000000000043E-02); +#483445 = AXIS2_PLACEMENT_3D('',#483446,#483447,#483448); +#483446 = CARTESIAN_POINT('',(139.16,-77.28283622558,-7.5E-02)); +#483447 = DIRECTION('',(0.,0.,-1.)); +#483448 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#483449 = ORIENTED_EDGE('',*,*,#483450,.T.); +#483450 = EDGE_CURVE('',#483442,#483451,#483453,.T.); +#483451 = VERTEX_POINT('',#483452); +#483452 = CARTESIAN_POINT('',(139.1,-77.067164,-7.5E-02)); +#483453 = LINE('',#483454,#483455); +#483454 = CARTESIAN_POINT('',(139.1,-77.282836,-7.5E-02)); +#483455 = VECTOR('',#483456,1.); +#483456 = DIRECTION('',(0.,1.,0.)); +#483457 = ORIENTED_EDGE('',*,*,#483458,.T.); +#483458 = EDGE_CURVE('',#483451,#483423,#483459,.T.); +#483459 = LINE('',#483460,#483461); +#483460 = CARTESIAN_POINT('',(139.1,-77.067164,-7.5E-02)); +#483461 = VECTOR('',#483462,1.); +#483462 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#483463 = PLANE('',#483464); +#483464 = AXIS2_PLACEMENT_3D('',#483465,#483466,#483467); +#483465 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483466 = DIRECTION('',(-0.,-0.,-1.)); +#483467 = DIRECTION('',(-1.,0.,0.)); +#483468 = SHELL_BASED_SURFACE_MODEL('',(#483469)); +#483469 = OPEN_SHELL('',(#483470)); +#483470 = ADVANCED_FACE('',(#483471),#483531,.T.); +#483471 = FACE_BOUND('',#483472,.T.); +#483472 = EDGE_LOOP('',(#483473,#483483,#483492,#483500,#483509,#483517, + #483525)); +#483473 = ORIENTED_EDGE('',*,*,#483474,.T.); +#483474 = EDGE_CURVE('',#483475,#483477,#483479,.T.); +#483475 = VERTEX_POINT('',#483476); +#483476 = CARTESIAN_POINT('',(142.991476,-76.52721,-7.5E-02)); +#483477 = VERTEX_POINT('',#483478); +#483478 = CARTESIAN_POINT('',(143.33471,-76.273976,-7.5E-02)); +#483479 = LINE('',#483480,#483481); +#483480 = CARTESIAN_POINT('',(142.991476,-76.52721,-7.5E-02)); +#483481 = VECTOR('',#483482,1.); +#483482 = DIRECTION('',(0.804692108267,0.593692353743,0.)); +#483483 = ORIENTED_EDGE('',*,*,#483484,.T.); +#483484 = EDGE_CURVE('',#483477,#483485,#483487,.T.); +#483485 = VERTEX_POINT('',#483486); +#483486 = CARTESIAN_POINT('',(143.43,-76.3225,-7.5E-02)); +#483487 = CIRCLE('',#483488,6.000008802103E-02); +#483488 = AXIS2_PLACEMENT_3D('',#483489,#483490,#483491); +#483489 = CARTESIAN_POINT('',(143.36999991198,-76.32250055744,-7.5E-02) + ); +#483490 = DIRECTION('',(0.,0.,-1.)); +#483491 = DIRECTION('',(-0.588164336846,0.808741437582,0.)); +#483492 = ORIENTED_EDGE('',*,*,#483493,.T.); +#483493 = EDGE_CURVE('',#483485,#483494,#483496,.T.); +#483494 = VERTEX_POINT('',#483495); +#483495 = CARTESIAN_POINT('',(143.43,-76.8025,-7.5E-02)); +#483496 = LINE('',#483497,#483498); +#483497 = CARTESIAN_POINT('',(143.43,-76.3225,-7.5E-02)); +#483498 = VECTOR('',#483499,1.); +#483499 = DIRECTION('',(0.,-1.,0.)); +#483500 = ORIENTED_EDGE('',*,*,#483501,.T.); +#483501 = EDGE_CURVE('',#483494,#483502,#483504,.T.); +#483502 = VERTEX_POINT('',#483503); +#483503 = CARTESIAN_POINT('',(143.33471,-76.851024,-7.5E-02)); +#483504 = CIRCLE('',#483505,6.000027696174E-02); +#483505 = AXIS2_PLACEMENT_3D('',#483506,#483507,#483508); +#483506 = CARTESIAN_POINT('',(143.36999972304,-76.80249907153,-7.5E-02) + ); +#483507 = DIRECTION('',(0.,0.,-1.)); +#483508 = DIRECTION('',(0.99999999988,-1.547440135436E-05,0.)); +#483509 = ORIENTED_EDGE('',*,*,#483510,.T.); +#483510 = EDGE_CURVE('',#483502,#483511,#483513,.T.); +#483511 = VERTEX_POINT('',#483512); +#483512 = CARTESIAN_POINT('',(143.00471,-76.611024,-7.5E-02)); +#483513 = LINE('',#483514,#483515); +#483514 = CARTESIAN_POINT('',(143.33471,-76.851024,-7.5E-02)); +#483515 = VECTOR('',#483516,1.); +#483516 = DIRECTION('',(-0.808736084303,0.588171697675,0.)); +#483517 = ORIENTED_EDGE('',*,*,#483518,.T.); +#483518 = EDGE_CURVE('',#483511,#483519,#483521,.T.); +#483519 = VERTEX_POINT('',#483520); +#483520 = CARTESIAN_POINT('',(142.980734,-76.571858,-7.5E-02)); +#483521 = LINE('',#483522,#483523); +#483522 = CARTESIAN_POINT('',(143.00471,-76.611024,-7.5E-02)); +#483523 = VECTOR('',#483524,1.); +#483524 = DIRECTION('',(-0.522103432673,0.852882175679,0.)); +#483525 = ORIENTED_EDGE('',*,*,#483526,.T.); +#483526 = EDGE_CURVE('',#483519,#483475,#483527,.T.); +#483527 = LINE('',#483528,#483529); +#483528 = CARTESIAN_POINT('',(142.980734,-76.571858,-7.5E-02)); +#483529 = VECTOR('',#483530,1.); +#483530 = DIRECTION('',(0.233918140202,0.972256295266,0.)); +#483531 = PLANE('',#483532); +#483532 = AXIS2_PLACEMENT_3D('',#483533,#483534,#483535); +#483533 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483534 = DIRECTION('',(-0.,-0.,-1.)); +#483535 = DIRECTION('',(-1.,0.,0.)); +#483536 = SHELL_BASED_SURFACE_MODEL('',(#483537)); +#483537 = OPEN_SHELL('',(#483538)); +#483538 = ADVANCED_FACE('',(#483539),#483600,.T.); +#483539 = FACE_BOUND('',#483540,.T.); +#483540 = EDGE_LOOP('',(#483541,#483552,#483560,#483569,#483577,#483585, + #483594)); +#483541 = ORIENTED_EDGE('',*,*,#483542,.T.); +#483542 = EDGE_CURVE('',#483543,#483545,#483547,.T.); +#483543 = VERTEX_POINT('',#483544); +#483544 = CARTESIAN_POINT('',(139.63,-75.9525,-7.5E-02)); +#483545 = VERTEX_POINT('',#483546); +#483546 = CARTESIAN_POINT('',(139.69,-75.8925,-7.5E-02)); +#483547 = CIRCLE('',#483548,5.999932016265E-02); +#483548 = AXIS2_PLACEMENT_3D('',#483549,#483550,#483551); +#483549 = CARTESIAN_POINT('',(139.68999932015,-75.95249932015,-7.5E-02) + ); +#483550 = DIRECTION('',(0.,0.,-1.)); +#483551 = DIRECTION('',(-0.999999999936,-1.133081517401E-05,-0.)); +#483552 = ORIENTED_EDGE('',*,*,#483553,.T.); +#483553 = EDGE_CURVE('',#483545,#483554,#483556,.T.); +#483554 = VERTEX_POINT('',#483555); +#483555 = CARTESIAN_POINT('',(140.365,-75.8925,-7.5E-02)); +#483556 = LINE('',#483557,#483558); +#483557 = CARTESIAN_POINT('',(139.69,-75.8925,-7.5E-02)); +#483558 = VECTOR('',#483559,1.); +#483559 = DIRECTION('',(1.,0.,0.)); +#483560 = ORIENTED_EDGE('',*,*,#483561,.T.); +#483561 = EDGE_CURVE('',#483554,#483562,#483564,.T.); +#483562 = VERTEX_POINT('',#483563); +#483563 = CARTESIAN_POINT('',(140.365,-76.0125,-7.5E-02)); +#483564 = CIRCLE('',#483565,6.000000000043E-02); +#483565 = AXIS2_PLACEMENT_3D('',#483566,#483567,#483568); +#483566 = CARTESIAN_POINT('',(140.36500022558,-75.9525,-7.5E-02)); +#483567 = DIRECTION('',(0.,0.,-1.)); +#483568 = DIRECTION('',(-3.759793779988E-06,0.999999999993,-0.)); +#483569 = ORIENTED_EDGE('',*,*,#483570,.T.); +#483570 = EDGE_CURVE('',#483562,#483571,#483573,.T.); +#483571 = VERTEX_POINT('',#483572); +#483572 = CARTESIAN_POINT('',(139.75,-76.0125,-7.5E-02)); +#483573 = LINE('',#483574,#483575); +#483574 = CARTESIAN_POINT('',(140.365,-76.0125,-7.5E-02)); +#483575 = VECTOR('',#483576,1.); +#483576 = DIRECTION('',(-1.,0.,0.)); +#483577 = ORIENTED_EDGE('',*,*,#483578,.T.); +#483578 = EDGE_CURVE('',#483571,#483579,#483581,.T.); +#483579 = VERTEX_POINT('',#483580); +#483580 = CARTESIAN_POINT('',(139.75,-76.1275,-7.5E-02)); +#483581 = LINE('',#483582,#483583); +#483582 = CARTESIAN_POINT('',(139.75,-76.0125,-7.5E-02)); +#483583 = VECTOR('',#483584,1.); +#483584 = DIRECTION('',(0.,-1.,0.)); +#483585 = ORIENTED_EDGE('',*,*,#483586,.T.); +#483586 = EDGE_CURVE('',#483579,#483587,#483589,.T.); +#483587 = VERTEX_POINT('',#483588); +#483588 = CARTESIAN_POINT('',(139.63,-76.1275,-7.5E-02)); +#483589 = CIRCLE('',#483590,6.000000000043E-02); +#483590 = AXIS2_PLACEMENT_3D('',#483591,#483592,#483593); +#483591 = CARTESIAN_POINT('',(139.69,-76.12750022558,-7.5E-02)); +#483592 = DIRECTION('',(0.,0.,-1.)); +#483593 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#483594 = ORIENTED_EDGE('',*,*,#483595,.T.); +#483595 = EDGE_CURVE('',#483587,#483543,#483596,.T.); +#483596 = LINE('',#483597,#483598); +#483597 = CARTESIAN_POINT('',(139.63,-76.1275,-7.5E-02)); +#483598 = VECTOR('',#483599,1.); +#483599 = DIRECTION('',(0.,1.,0.)); +#483600 = PLANE('',#483601); +#483601 = AXIS2_PLACEMENT_3D('',#483602,#483603,#483604); +#483602 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483603 = DIRECTION('',(-0.,-0.,-1.)); +#483604 = DIRECTION('',(-1.,0.,0.)); +#483605 = SHELL_BASED_SURFACE_MODEL('',(#483606)); +#483606 = OPEN_SHELL('',(#483607)); +#483607 = ADVANCED_FACE('',(#483608),#483669,.T.); +#483608 = FACE_BOUND('',#483609,.T.); +#483609 = EDGE_LOOP('',(#483610,#483621,#483629,#483638,#483646,#483655, + #483663)); +#483610 = ORIENTED_EDGE('',*,*,#483611,.T.); +#483611 = EDGE_CURVE('',#483612,#483614,#483616,.T.); +#483612 = VERTEX_POINT('',#483613); +#483613 = CARTESIAN_POINT('',(142.235,-76.0125,-7.5E-02)); +#483614 = VERTEX_POINT('',#483615); +#483615 = CARTESIAN_POINT('',(142.235,-75.8925,-7.5E-02)); +#483616 = CIRCLE('',#483617,6.000000000043E-02); +#483617 = AXIS2_PLACEMENT_3D('',#483618,#483619,#483620); +#483618 = CARTESIAN_POINT('',(142.23499977441,-75.9525,-7.5E-02)); +#483619 = DIRECTION('',(0.,0.,-1.)); +#483620 = DIRECTION('',(3.759794253683E-06,-0.999999999993,0.)); +#483621 = ORIENTED_EDGE('',*,*,#483622,.T.); +#483622 = EDGE_CURVE('',#483614,#483623,#483625,.T.); +#483623 = VERTEX_POINT('',#483624); +#483624 = CARTESIAN_POINT('',(142.91,-75.8925,-7.5E-02)); +#483625 = LINE('',#483626,#483627); +#483626 = CARTESIAN_POINT('',(142.235,-75.8925,-7.5E-02)); +#483627 = VECTOR('',#483628,1.); +#483628 = DIRECTION('',(1.,0.,0.)); +#483629 = ORIENTED_EDGE('',*,*,#483630,.T.); +#483630 = EDGE_CURVE('',#483623,#483631,#483633,.T.); +#483631 = VERTEX_POINT('',#483632); +#483632 = CARTESIAN_POINT('',(142.97,-75.9525,-7.5E-02)); +#483633 = CIRCLE('',#483634,5.999932016262E-02); +#483634 = AXIS2_PLACEMENT_3D('',#483635,#483636,#483637); +#483635 = CARTESIAN_POINT('',(142.91000067984,-75.95249932015,-7.5E-02) + ); +#483636 = DIRECTION('',(0.,0.,-1.)); +#483637 = DIRECTION('',(-1.133081564772E-05,0.999999999936,0.)); +#483638 = ORIENTED_EDGE('',*,*,#483639,.T.); +#483639 = EDGE_CURVE('',#483631,#483640,#483642,.T.); +#483640 = VERTEX_POINT('',#483641); +#483641 = CARTESIAN_POINT('',(142.97,-76.1275,-7.5E-02)); +#483642 = LINE('',#483643,#483644); +#483643 = CARTESIAN_POINT('',(142.97,-75.9525,-7.5E-02)); +#483644 = VECTOR('',#483645,1.); +#483645 = DIRECTION('',(0.,-1.,0.)); +#483646 = ORIENTED_EDGE('',*,*,#483647,.T.); +#483647 = EDGE_CURVE('',#483640,#483648,#483650,.T.); +#483648 = VERTEX_POINT('',#483649); +#483649 = CARTESIAN_POINT('',(142.85,-76.1275,-7.5E-02)); +#483650 = CIRCLE('',#483651,6.000000000043E-02); +#483651 = AXIS2_PLACEMENT_3D('',#483652,#483653,#483654); +#483652 = CARTESIAN_POINT('',(142.91,-76.12750022558,-7.5E-02)); +#483653 = DIRECTION('',(0.,0.,-1.)); +#483654 = DIRECTION('',(0.999999999993,3.759794253684E-06,0.)); +#483655 = ORIENTED_EDGE('',*,*,#483656,.T.); +#483656 = EDGE_CURVE('',#483648,#483657,#483659,.T.); +#483657 = VERTEX_POINT('',#483658); +#483658 = CARTESIAN_POINT('',(142.85,-76.0125,-7.5E-02)); +#483659 = LINE('',#483660,#483661); +#483660 = CARTESIAN_POINT('',(142.85,-76.1275,-7.5E-02)); +#483661 = VECTOR('',#483662,1.); +#483662 = DIRECTION('',(0.,1.,0.)); +#483663 = ORIENTED_EDGE('',*,*,#483664,.T.); +#483664 = EDGE_CURVE('',#483657,#483612,#483665,.T.); +#483665 = LINE('',#483666,#483667); +#483666 = CARTESIAN_POINT('',(142.85,-76.0125,-7.5E-02)); +#483667 = VECTOR('',#483668,1.); +#483668 = DIRECTION('',(-1.,0.,0.)); +#483669 = PLANE('',#483670); +#483670 = AXIS2_PLACEMENT_3D('',#483671,#483672,#483673); +#483671 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483672 = DIRECTION('',(-0.,-0.,-1.)); +#483673 = DIRECTION('',(-1.,0.,0.)); +#483674 = SHELL_BASED_SURFACE_MODEL('',(#483675)); +#483675 = OPEN_SHELL('',(#483676)); +#483676 = ADVANCED_FACE('',(#483677),#483721,.T.); +#483677 = FACE_BOUND('',#483678,.T.); +#483678 = EDGE_LOOP('',(#483679,#483690,#483698,#483707,#483715)); +#483679 = ORIENTED_EDGE('',*,*,#483680,.T.); +#483680 = EDGE_CURVE('',#483681,#483683,#483685,.T.); +#483681 = VERTEX_POINT('',#483682); +#483682 = CARTESIAN_POINT('',(139.084567,-72.869203,-7.5E-02)); +#483683 = VERTEX_POINT('',#483684); +#483684 = CARTESIAN_POINT('',(139.2,-72.892164,-7.5E-02)); +#483685 = CIRCLE('',#483686,6.000007318647E-02); +#483686 = AXIS2_PLACEMENT_3D('',#483687,#483688,#483689); +#483687 = CARTESIAN_POINT('',(139.13999992681,-72.89216382331,-7.5E-02) + ); +#483688 = DIRECTION('',(0.,0.,-1.)); +#483689 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483690 = ORIENTED_EDGE('',*,*,#483691,.T.); +#483691 = EDGE_CURVE('',#483683,#483692,#483694,.T.); +#483692 = VERTEX_POINT('',#483693); +#483693 = CARTESIAN_POINT('',(139.2,-73.107836,-7.5E-02)); +#483694 = LINE('',#483695,#483696); +#483695 = CARTESIAN_POINT('',(139.2,-72.892164,-7.5E-02)); +#483696 = VECTOR('',#483697,1.); +#483697 = DIRECTION('',(0.,-1.,0.)); +#483698 = ORIENTED_EDGE('',*,*,#483699,.T.); +#483699 = EDGE_CURVE('',#483692,#483700,#483702,.T.); +#483700 = VERTEX_POINT('',#483701); +#483701 = CARTESIAN_POINT('',(139.08,-73.107836,-7.5E-02)); +#483702 = CIRCLE('',#483703,6.000000000041E-02); +#483703 = AXIS2_PLACEMENT_3D('',#483704,#483705,#483706); +#483704 = CARTESIAN_POINT('',(139.14,-73.10783622558,-7.5E-02)); +#483705 = DIRECTION('',(0.,0.,-1.)); +#483706 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#483707 = ORIENTED_EDGE('',*,*,#483708,.T.); +#483708 = EDGE_CURVE('',#483700,#483709,#483711,.T.); +#483709 = VERTEX_POINT('',#483710); +#483710 = CARTESIAN_POINT('',(139.08,-72.892164,-7.5E-02)); +#483711 = LINE('',#483712,#483713); +#483712 = CARTESIAN_POINT('',(139.08,-73.107836,-7.5E-02)); +#483713 = VECTOR('',#483714,1.); +#483714 = DIRECTION('',(0.,1.,0.)); +#483715 = ORIENTED_EDGE('',*,*,#483716,.T.); +#483716 = EDGE_CURVE('',#483709,#483681,#483717,.T.); +#483717 = LINE('',#483718,#483719); +#483718 = CARTESIAN_POINT('',(139.08,-72.892164,-7.5E-02)); +#483719 = VECTOR('',#483720,1.); +#483720 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#483721 = PLANE('',#483722); +#483722 = AXIS2_PLACEMENT_3D('',#483723,#483724,#483725); +#483723 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483724 = DIRECTION('',(-0.,-0.,-1.)); +#483725 = DIRECTION('',(-1.,0.,0.)); +#483726 = SHELL_BASED_SURFACE_MODEL('',(#483727)); +#483727 = OPEN_SHELL('',(#483728)); +#483728 = ADVANCED_FACE('',(#483729),#483773,.T.); +#483729 = FACE_BOUND('',#483730,.T.); +#483730 = EDGE_LOOP('',(#483731,#483742,#483750,#483759,#483767)); +#483731 = ORIENTED_EDGE('',*,*,#483732,.T.); +#483732 = EDGE_CURVE('',#483733,#483735,#483737,.T.); +#483733 = VERTEX_POINT('',#483734); +#483734 = CARTESIAN_POINT('',(139.804567,-72.869203,-7.5E-02)); +#483735 = VERTEX_POINT('',#483736); +#483736 = CARTESIAN_POINT('',(139.92,-72.892164,-7.5E-02)); +#483737 = CIRCLE('',#483738,6.000007318647E-02); +#483738 = AXIS2_PLACEMENT_3D('',#483739,#483740,#483741); +#483739 = CARTESIAN_POINT('',(139.85999992681,-72.89216382331,-7.5E-02) + ); +#483740 = DIRECTION('',(0.,0.,-1.)); +#483741 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483742 = ORIENTED_EDGE('',*,*,#483743,.T.); +#483743 = EDGE_CURVE('',#483735,#483744,#483746,.T.); +#483744 = VERTEX_POINT('',#483745); +#483745 = CARTESIAN_POINT('',(139.92,-73.107836,-7.5E-02)); +#483746 = LINE('',#483747,#483748); +#483747 = CARTESIAN_POINT('',(139.92,-72.892164,-7.5E-02)); +#483748 = VECTOR('',#483749,1.); +#483749 = DIRECTION('',(0.,-1.,0.)); +#483750 = ORIENTED_EDGE('',*,*,#483751,.T.); +#483751 = EDGE_CURVE('',#483744,#483752,#483754,.T.); +#483752 = VERTEX_POINT('',#483753); +#483753 = CARTESIAN_POINT('',(139.8,-73.107836,-7.5E-02)); +#483754 = CIRCLE('',#483755,6.000000000042E-02); +#483755 = AXIS2_PLACEMENT_3D('',#483756,#483757,#483758); +#483756 = CARTESIAN_POINT('',(139.86,-73.10783622558,-7.5E-02)); +#483757 = DIRECTION('',(0.,0.,-1.)); +#483758 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#483759 = ORIENTED_EDGE('',*,*,#483760,.T.); +#483760 = EDGE_CURVE('',#483752,#483761,#483763,.T.); +#483761 = VERTEX_POINT('',#483762); +#483762 = CARTESIAN_POINT('',(139.8,-72.892164,-7.5E-02)); +#483763 = LINE('',#483764,#483765); +#483764 = CARTESIAN_POINT('',(139.8,-73.107836,-7.5E-02)); +#483765 = VECTOR('',#483766,1.); +#483766 = DIRECTION('',(0.,1.,0.)); +#483767 = ORIENTED_EDGE('',*,*,#483768,.T.); +#483768 = EDGE_CURVE('',#483761,#483733,#483769,.T.); +#483769 = LINE('',#483770,#483771); +#483770 = CARTESIAN_POINT('',(139.8,-72.892164,-7.5E-02)); +#483771 = VECTOR('',#483772,1.); +#483772 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#483773 = PLANE('',#483774); +#483774 = AXIS2_PLACEMENT_3D('',#483775,#483776,#483777); +#483775 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483776 = DIRECTION('',(-0.,-0.,-1.)); +#483777 = DIRECTION('',(-1.,0.,0.)); +#483778 = SHELL_BASED_SURFACE_MODEL('',(#483779)); +#483779 = OPEN_SHELL('',(#483780)); +#483780 = ADVANCED_FACE('',(#483781),#483875,.T.); +#483781 = FACE_BOUND('',#483782,.T.); +#483782 = EDGE_LOOP('',(#483783,#483794,#483802,#483811,#483819,#483828, + #483836,#483845,#483853,#483861,#483869)); +#483783 = ORIENTED_EDGE('',*,*,#483784,.T.); +#483784 = EDGE_CURVE('',#483785,#483787,#483789,.T.); +#483785 = VERTEX_POINT('',#483786); +#483786 = CARTESIAN_POINT('',(138.542067,-71.687039,-7.5E-02)); +#483787 = VERTEX_POINT('',#483788); +#483788 = CARTESIAN_POINT('',(138.6575,-71.71,-7.5E-02)); +#483789 = CIRCLE('',#483790,6.000007318647E-02); +#483790 = AXIS2_PLACEMENT_3D('',#483791,#483792,#483793); +#483791 = CARTESIAN_POINT('',(138.59749992681,-71.70999982331,-7.5E-02) + ); +#483792 = DIRECTION('',(0.,0.,-1.)); +#483793 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483794 = ORIENTED_EDGE('',*,*,#483795,.T.); +#483795 = EDGE_CURVE('',#483787,#483796,#483798,.T.); +#483796 = VERTEX_POINT('',#483797); +#483797 = CARTESIAN_POINT('',(138.6575,-72.71,-7.5E-02)); +#483798 = LINE('',#483799,#483800); +#483799 = CARTESIAN_POINT('',(138.6575,-71.71,-7.5E-02)); +#483800 = VECTOR('',#483801,1.); +#483801 = DIRECTION('',(0.,-1.,0.)); +#483802 = ORIENTED_EDGE('',*,*,#483803,.T.); +#483803 = EDGE_CURVE('',#483796,#483804,#483806,.T.); +#483804 = VERTEX_POINT('',#483805); +#483805 = CARTESIAN_POINT('',(138.5975,-72.77,-7.5E-02)); +#483806 = CIRCLE('',#483807,5.999932016262E-02); +#483807 = AXIS2_PLACEMENT_3D('',#483808,#483809,#483810); +#483808 = CARTESIAN_POINT('',(138.59750067984,-72.71000067984,-7.5E-02) + ); +#483809 = DIRECTION('',(0.,0.,-1.)); +#483810 = DIRECTION('',(0.999999999936,1.133081564772E-05,0.)); +#483811 = ORIENTED_EDGE('',*,*,#483812,.T.); +#483812 = EDGE_CURVE('',#483804,#483813,#483815,.T.); +#483813 = VERTEX_POINT('',#483814); +#483814 = CARTESIAN_POINT('',(137.0775,-72.77,-7.5E-02)); +#483815 = LINE('',#483816,#483817); +#483816 = CARTESIAN_POINT('',(138.5975,-72.77,-7.5E-02)); +#483817 = VECTOR('',#483818,1.); +#483818 = DIRECTION('',(-1.,0.,0.)); +#483819 = ORIENTED_EDGE('',*,*,#483820,.T.); +#483820 = EDGE_CURVE('',#483813,#483821,#483823,.T.); +#483821 = VERTEX_POINT('',#483822); +#483822 = CARTESIAN_POINT('',(137.0175,-72.71,-7.5E-02)); +#483823 = CIRCLE('',#483824,5.999932016256E-02); +#483824 = AXIS2_PLACEMENT_3D('',#483825,#483826,#483827); +#483825 = CARTESIAN_POINT('',(137.07749932015,-72.71000067984,-7.5E-02) + ); +#483826 = DIRECTION('',(0.,0.,-1.)); +#483827 = DIRECTION('',(1.133081612143E-05,-0.999999999936,0.)); +#483828 = ORIENTED_EDGE('',*,*,#483829,.T.); +#483829 = EDGE_CURVE('',#483821,#483830,#483832,.T.); +#483830 = VERTEX_POINT('',#483831); +#483831 = CARTESIAN_POINT('',(137.0175,-72.66,-7.5E-02)); +#483832 = LINE('',#483833,#483834); +#483833 = CARTESIAN_POINT('',(137.0175,-72.71,-7.5E-02)); +#483834 = VECTOR('',#483835,1.); +#483835 = DIRECTION('',(0.,1.,0.)); +#483836 = ORIENTED_EDGE('',*,*,#483837,.T.); +#483837 = EDGE_CURVE('',#483830,#483838,#483840,.T.); +#483838 = VERTEX_POINT('',#483839); +#483839 = CARTESIAN_POINT('',(137.132933,-72.637039,-7.5E-02)); +#483840 = CIRCLE('',#483841,6.000007318647E-02); +#483841 = AXIS2_PLACEMENT_3D('',#483842,#483843,#483844); +#483842 = CARTESIAN_POINT('',(137.07750007318,-72.65999982331,-7.5E-02) + ); +#483843 = DIRECTION('',(0.,0.,-1.)); +#483844 = DIRECTION('',(-0.999999999996,-2.944769248434E-06,-0.)); +#483845 = ORIENTED_EDGE('',*,*,#483846,.T.); +#483846 = EDGE_CURVE('',#483838,#483847,#483849,.T.); +#483847 = VERTEX_POINT('',#483848); +#483848 = CARTESIAN_POINT('',(137.135511,-72.65,-7.5E-02)); +#483849 = LINE('',#483850,#483851); +#483850 = CARTESIAN_POINT('',(137.132933,-72.637039,-7.5E-02)); +#483851 = VECTOR('',#483852,1.); +#483852 = DIRECTION('',(0.195082810336,-0.980786774539,0.)); +#483853 = ORIENTED_EDGE('',*,*,#483854,.T.); +#483854 = EDGE_CURVE('',#483847,#483855,#483857,.T.); +#483855 = VERTEX_POINT('',#483856); +#483856 = CARTESIAN_POINT('',(138.5375,-72.65,-7.5E-02)); +#483857 = LINE('',#483858,#483859); +#483858 = CARTESIAN_POINT('',(137.135511,-72.65,-7.5E-02)); +#483859 = VECTOR('',#483860,1.); +#483860 = DIRECTION('',(1.,0.,0.)); +#483861 = ORIENTED_EDGE('',*,*,#483862,.T.); +#483862 = EDGE_CURVE('',#483855,#483863,#483865,.T.); +#483863 = VERTEX_POINT('',#483864); +#483864 = CARTESIAN_POINT('',(138.5375,-71.71,-7.5E-02)); +#483865 = LINE('',#483866,#483867); +#483866 = CARTESIAN_POINT('',(138.5375,-72.65,-7.5E-02)); +#483867 = VECTOR('',#483868,1.); +#483868 = DIRECTION('',(0.,1.,0.)); +#483869 = ORIENTED_EDGE('',*,*,#483870,.T.); +#483870 = EDGE_CURVE('',#483863,#483785,#483871,.T.); +#483871 = LINE('',#483872,#483873); +#483872 = CARTESIAN_POINT('',(138.5375,-71.71,-7.5E-02)); +#483873 = VECTOR('',#483874,1.); +#483874 = DIRECTION('',(0.195081000118,0.980787134598,0.)); +#483875 = PLANE('',#483876); +#483876 = AXIS2_PLACEMENT_3D('',#483877,#483878,#483879); +#483877 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483878 = DIRECTION('',(-0.,-0.,-1.)); +#483879 = DIRECTION('',(-1.,0.,0.)); +#483880 = SHELL_BASED_SURFACE_MODEL('',(#483881)); +#483881 = OPEN_SHELL('',(#483882)); +#483882 = ADVANCED_FACE('',(#483883),#483927,.T.); +#483883 = FACE_BOUND('',#483884,.T.); +#483884 = EDGE_LOOP('',(#483885,#483896,#483904,#483913,#483921)); +#483885 = ORIENTED_EDGE('',*,*,#483886,.T.); +#483886 = EDGE_CURVE('',#483887,#483889,#483891,.T.); +#483887 = VERTEX_POINT('',#483888); +#483888 = CARTESIAN_POINT('',(137.022067,-70.737039,-7.5E-02)); +#483889 = VERTEX_POINT('',#483890); +#483890 = CARTESIAN_POINT('',(137.1375,-70.76,-7.5E-02)); +#483891 = CIRCLE('',#483892,6.000007318647E-02); +#483892 = AXIS2_PLACEMENT_3D('',#483893,#483894,#483895); +#483893 = CARTESIAN_POINT('',(137.07749992681,-70.75999982331,-7.5E-02) + ); +#483894 = DIRECTION('',(0.,0.,-1.)); +#483895 = DIRECTION('',(-0.923880986637,0.382679921777,0.)); +#483896 = ORIENTED_EDGE('',*,*,#483897,.T.); +#483897 = EDGE_CURVE('',#483889,#483898,#483900,.T.); +#483898 = VERTEX_POINT('',#483899); +#483899 = CARTESIAN_POINT('',(137.1375,-71.54,-7.5E-02)); +#483900 = LINE('',#483901,#483902); +#483901 = CARTESIAN_POINT('',(137.1375,-70.76,-7.5E-02)); +#483902 = VECTOR('',#483903,1.); +#483903 = DIRECTION('',(0.,-1.,0.)); +#483904 = ORIENTED_EDGE('',*,*,#483905,.T.); +#483905 = EDGE_CURVE('',#483898,#483906,#483908,.T.); +#483906 = VERTEX_POINT('',#483907); +#483907 = CARTESIAN_POINT('',(137.0175,-71.54,-7.5E-02)); +#483908 = CIRCLE('',#483909,6.000000000041E-02); +#483909 = AXIS2_PLACEMENT_3D('',#483910,#483911,#483912); +#483910 = CARTESIAN_POINT('',(137.0775,-71.54000022558,-7.5E-02)); +#483911 = DIRECTION('',(0.,0.,-1.)); +#483912 = DIRECTION('',(0.999999999993,3.759794253685E-06,0.)); +#483913 = ORIENTED_EDGE('',*,*,#483914,.T.); +#483914 = EDGE_CURVE('',#483906,#483915,#483917,.T.); +#483915 = VERTEX_POINT('',#483916); +#483916 = CARTESIAN_POINT('',(137.0175,-70.76,-7.5E-02)); +#483917 = LINE('',#483918,#483919); +#483918 = CARTESIAN_POINT('',(137.0175,-71.54,-7.5E-02)); +#483919 = VECTOR('',#483920,1.); +#483920 = DIRECTION('',(0.,1.,0.)); +#483921 = ORIENTED_EDGE('',*,*,#483922,.T.); +#483922 = EDGE_CURVE('',#483915,#483887,#483923,.T.); +#483923 = LINE('',#483924,#483925); +#483924 = CARTESIAN_POINT('',(137.0175,-70.76,-7.5E-02)); +#483925 = VECTOR('',#483926,1.); +#483926 = DIRECTION('',(0.195081000117,0.980787134598,0.)); +#483927 = PLANE('',#483928); +#483928 = AXIS2_PLACEMENT_3D('',#483929,#483930,#483931); +#483929 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483930 = DIRECTION('',(-0.,-0.,-1.)); +#483931 = DIRECTION('',(-1.,0.,0.)); +#483932 = SHELL_BASED_SURFACE_MODEL('',(#483933)); +#483933 = OPEN_SHELL('',(#483934)); +#483934 = ADVANCED_FACE('',(#483935),#483995,.T.); +#483935 = FACE_BOUND('',#483936,.T.); +#483936 = EDGE_LOOP('',(#483937,#483948,#483956,#483965,#483973,#483981, + #483989)); +#483937 = ORIENTED_EDGE('',*,*,#483938,.T.); +#483938 = EDGE_CURVE('',#483939,#483941,#483943,.T.); +#483939 = VERTEX_POINT('',#483940); +#483940 = CARTESIAN_POINT('',(136.248976,-71.23529,-7.5E-02)); +#483941 = VERTEX_POINT('',#483942); +#483942 = CARTESIAN_POINT('',(136.2975,-71.14,-7.5E-02)); +#483943 = CIRCLE('',#483944,5.999941814204E-02); +#483944 = AXIS2_PLACEMENT_3D('',#483945,#483946,#483947); +#483945 = CARTESIAN_POINT('',(136.29749924194,-71.19999941813,-7.5E-02) + ); +#483946 = DIRECTION('',(0.,0.,-1.)); +#483947 = DIRECTION('',(-0.80872854189,-0.588182068353,-0.)); +#483948 = ORIENTED_EDGE('',*,*,#483949,.T.); +#483949 = EDGE_CURVE('',#483941,#483950,#483952,.T.); +#483950 = VERTEX_POINT('',#483951); +#483951 = CARTESIAN_POINT('',(136.7775,-71.14,-7.5E-02)); +#483952 = LINE('',#483953,#483954); +#483953 = CARTESIAN_POINT('',(136.2975,-71.14,-7.5E-02)); +#483954 = VECTOR('',#483955,1.); +#483955 = DIRECTION('',(1.,0.,0.)); +#483956 = ORIENTED_EDGE('',*,*,#483957,.T.); +#483957 = EDGE_CURVE('',#483950,#483958,#483960,.T.); +#483958 = VERTEX_POINT('',#483959); +#483959 = CARTESIAN_POINT('',(136.826024,-71.23529,-7.5E-02)); +#483960 = CIRCLE('',#483961,6.000027696172E-02); +#483961 = AXIS2_PLACEMENT_3D('',#483962,#483963,#483964); +#483962 = CARTESIAN_POINT('',(136.77749907153,-71.20000027695,-7.5E-02) + ); +#483963 = DIRECTION('',(0.,0.,-1.)); +#483964 = DIRECTION('',(1.547440111751E-05,0.99999999988,0.)); +#483965 = ORIENTED_EDGE('',*,*,#483966,.T.); +#483966 = EDGE_CURVE('',#483958,#483967,#483969,.T.); +#483967 = VERTEX_POINT('',#483968); +#483968 = CARTESIAN_POINT('',(136.586024,-71.56529,-7.5E-02)); +#483969 = LINE('',#483970,#483971); +#483970 = CARTESIAN_POINT('',(136.826024,-71.23529,-7.5E-02)); +#483971 = VECTOR('',#483972,1.); +#483972 = DIRECTION('',(-0.588171697675,-0.808736084303,0.)); +#483973 = ORIENTED_EDGE('',*,*,#483974,.T.); +#483974 = EDGE_CURVE('',#483967,#483975,#483977,.T.); +#483975 = VERTEX_POINT('',#483976); +#483976 = CARTESIAN_POINT('',(136.546858,-71.589266,-7.5E-02)); +#483977 = LINE('',#483978,#483979); +#483978 = CARTESIAN_POINT('',(136.586024,-71.56529,-7.5E-02)); +#483979 = VECTOR('',#483980,1.); +#483980 = DIRECTION('',(-0.852882175679,-0.522103432673,0.)); +#483981 = ORIENTED_EDGE('',*,*,#483982,.T.); +#483982 = EDGE_CURVE('',#483975,#483983,#483985,.T.); +#483983 = VERTEX_POINT('',#483984); +#483984 = CARTESIAN_POINT('',(136.50221,-71.578524,-7.5E-02)); +#483985 = LINE('',#483986,#483987); +#483986 = CARTESIAN_POINT('',(136.546858,-71.589266,-7.5E-02)); +#483987 = VECTOR('',#483988,1.); +#483988 = DIRECTION('',(-0.972256295266,0.233918140202,0.)); +#483989 = ORIENTED_EDGE('',*,*,#483990,.T.); +#483990 = EDGE_CURVE('',#483983,#483939,#483991,.T.); +#483991 = LINE('',#483992,#483993); +#483992 = CARTESIAN_POINT('',(136.50221,-71.578524,-7.5E-02)); +#483993 = VECTOR('',#483994,1.); +#483994 = DIRECTION('',(-0.593692353743,0.804692108267,0.)); +#483995 = PLANE('',#483996); +#483996 = AXIS2_PLACEMENT_3D('',#483997,#483998,#483999); +#483997 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#483998 = DIRECTION('',(-0.,-0.,-1.)); +#483999 = DIRECTION('',(-1.,0.,0.)); +#484000 = SHELL_BASED_SURFACE_MODEL('',(#484001)); +#484001 = OPEN_SHELL('',(#484002)); +#484002 = ADVANCED_FACE('',(#484003),#484089,.T.); +#484003 = FACE_BOUND('',#484004,.T.); +#484004 = EDGE_LOOP('',(#484005,#484016,#484024,#484033,#484041,#484050, + #484058,#484066,#484074,#484083)); +#484005 = ORIENTED_EDGE('',*,*,#484006,.T.); +#484006 = EDGE_CURVE('',#484007,#484009,#484011,.T.); +#484007 = VERTEX_POINT('',#484008); +#484008 = CARTESIAN_POINT('',(137.0175,-69.59,-7.5E-02)); +#484009 = VERTEX_POINT('',#484010); +#484010 = CARTESIAN_POINT('',(137.0775,-69.53,-7.5E-02)); +#484011 = CIRCLE('',#484012,5.999932016253E-02); +#484012 = AXIS2_PLACEMENT_3D('',#484013,#484014,#484015); +#484013 = CARTESIAN_POINT('',(137.07749932015,-69.58999932015,-7.5E-02) + ); +#484014 = DIRECTION('',(0.,0.,-1.)); +#484015 = DIRECTION('',(-0.999999999936,-1.133081706884E-05,-0.)); +#484016 = ORIENTED_EDGE('',*,*,#484017,.T.); +#484017 = EDGE_CURVE('',#484009,#484018,#484020,.T.); +#484018 = VERTEX_POINT('',#484019); +#484019 = CARTESIAN_POINT('',(138.5975,-69.53,-7.5E-02)); +#484020 = LINE('',#484021,#484022); +#484021 = CARTESIAN_POINT('',(137.0775,-69.53,-7.5E-02)); +#484022 = VECTOR('',#484023,1.); +#484023 = DIRECTION('',(1.,0.,0.)); +#484024 = ORIENTED_EDGE('',*,*,#484025,.T.); +#484025 = EDGE_CURVE('',#484018,#484026,#484028,.T.); +#484026 = VERTEX_POINT('',#484027); +#484027 = CARTESIAN_POINT('',(138.6575,-69.59,-7.5E-02)); +#484028 = CIRCLE('',#484029,5.999932016257E-02); +#484029 = AXIS2_PLACEMENT_3D('',#484030,#484031,#484032); +#484030 = CARTESIAN_POINT('',(138.59750067984,-69.58999932015,-7.5E-02) + ); +#484031 = DIRECTION('',(0.,0.,-1.)); +#484032 = DIRECTION('',(-1.133081659513E-05,0.999999999936,0.)); +#484033 = ORIENTED_EDGE('',*,*,#484034,.T.); +#484034 = EDGE_CURVE('',#484026,#484035,#484037,.T.); +#484035 = VERTEX_POINT('',#484036); +#484036 = CARTESIAN_POINT('',(138.6575,-70.59,-7.5E-02)); +#484037 = LINE('',#484038,#484039); +#484038 = CARTESIAN_POINT('',(138.6575,-69.59,-7.5E-02)); +#484039 = VECTOR('',#484040,1.); +#484040 = DIRECTION('',(0.,-1.,0.)); +#484041 = ORIENTED_EDGE('',*,*,#484042,.T.); +#484042 = EDGE_CURVE('',#484035,#484043,#484045,.T.); +#484043 = VERTEX_POINT('',#484044); +#484044 = CARTESIAN_POINT('',(138.5375,-70.59,-7.5E-02)); +#484045 = CIRCLE('',#484046,6.000000000043E-02); +#484046 = AXIS2_PLACEMENT_3D('',#484047,#484048,#484049); +#484047 = CARTESIAN_POINT('',(138.5975,-70.59000022558,-7.5E-02)); +#484048 = DIRECTION('',(0.,0.,-1.)); +#484049 = DIRECTION('',(0.999999999993,3.759794016836E-06,0.)); +#484050 = ORIENTED_EDGE('',*,*,#484051,.T.); +#484051 = EDGE_CURVE('',#484043,#484052,#484054,.T.); +#484052 = VERTEX_POINT('',#484053); +#484053 = CARTESIAN_POINT('',(138.5375,-69.65,-7.5E-02)); +#484054 = LINE('',#484055,#484056); +#484055 = CARTESIAN_POINT('',(138.5375,-70.59,-7.5E-02)); +#484056 = VECTOR('',#484057,1.); +#484057 = DIRECTION('',(0.,1.,0.)); +#484058 = ORIENTED_EDGE('',*,*,#484059,.T.); +#484059 = EDGE_CURVE('',#484052,#484060,#484062,.T.); +#484060 = VERTEX_POINT('',#484061); +#484061 = CARTESIAN_POINT('',(137.135511,-69.65,-7.5E-02)); +#484062 = LINE('',#484063,#484064); +#484063 = CARTESIAN_POINT('',(138.5375,-69.65,-7.5E-02)); +#484064 = VECTOR('',#484065,1.); +#484065 = DIRECTION('',(-1.,0.,0.)); +#484066 = ORIENTED_EDGE('',*,*,#484067,.T.); +#484067 = EDGE_CURVE('',#484060,#484068,#484070,.T.); +#484068 = VERTEX_POINT('',#484069); +#484069 = CARTESIAN_POINT('',(137.132933,-69.662961,-7.5E-02)); +#484070 = LINE('',#484071,#484072); +#484071 = CARTESIAN_POINT('',(137.135511,-69.65,-7.5E-02)); +#484072 = VECTOR('',#484073,1.); +#484073 = DIRECTION('',(-0.195082810336,-0.980786774539,0.)); +#484074 = ORIENTED_EDGE('',*,*,#484075,.T.); +#484075 = EDGE_CURVE('',#484068,#484076,#484078,.T.); +#484076 = VERTEX_POINT('',#484077); +#484077 = CARTESIAN_POINT('',(137.0175,-69.64,-7.5E-02)); +#484078 = CIRCLE('',#484079,6.000007318647E-02); +#484079 = AXIS2_PLACEMENT_3D('',#484080,#484081,#484082); +#484080 = CARTESIAN_POINT('',(137.07750007318,-69.64000017668,-7.5E-02) + ); +#484081 = DIRECTION('',(-0.,0.,-1.)); +#484082 = DIRECTION('',(0.923880986637,-0.382679921777,-0.)); +#484083 = ORIENTED_EDGE('',*,*,#484084,.T.); +#484084 = EDGE_CURVE('',#484076,#484007,#484085,.T.); +#484085 = LINE('',#484086,#484087); +#484086 = CARTESIAN_POINT('',(137.0175,-69.64,-7.5E-02)); +#484087 = VECTOR('',#484088,1.); +#484088 = DIRECTION('',(0.,1.,0.)); +#484089 = PLANE('',#484090); +#484090 = AXIS2_PLACEMENT_3D('',#484091,#484092,#484093); +#484091 = CARTESIAN_POINT('',(0.,0.,-7.5E-02)); +#484092 = DIRECTION('',(-0.,-0.,-1.)); +#484093 = DIRECTION('',(-1.,0.,0.)); +#484094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#484098)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#484095,#484096,#484097)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#484095 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#484096 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#484097 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#484098 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#484095, + 'distance_accuracy_value','confusion accuracy'); +#484099 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#484100,#484102); +#484100 = ( REPRESENTATION_RELATIONSHIP('','',#450674,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#484101) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#484101 = ITEM_DEFINED_TRANSFORMATION('','',#11,#371); +#484102 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #484103); +#484103 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('116','=>[0:1:1:55]','',#5, + #450669,$); +#484104 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#450671)); +#484105 = SHAPE_DEFINITION_REPRESENTATION(#484106,#484112); +#484106 = PRODUCT_DEFINITION_SHAPE('','',#484107); +#484107 = PRODUCT_DEFINITION('design','',#484108,#484111); +#484108 = PRODUCT_DEFINITION_FORMATION('','',#484109); +#484109 = PRODUCT('snips_controller-unsaved-export-kiHHnP_soldermask', + 'snips_controller-unsaved-export-kiHHnP_soldermask','',(#484110)); +#484110 = PRODUCT_CONTEXT('',#2,'mechanical'); +#484111 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#484112 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#484113),#495308 + ); +#484113 = SHELL_BASED_SURFACE_MODEL('',(#484114)); +#484114 = OPEN_SHELL('',(#484115)); +#484115 = ADVANCED_FACE('',(#484116,#484150,#484220,#484290,#484326, + #484362,#484373,#484384,#484454,#484524,#484594,#484664,#484734, + #484745,#484756,#484826,#484896,#484932,#484968,#484979,#484990, + #485060,#485130,#485200,#485270,#485340,#485410,#485480,#485550, + #485620,#485690,#485760,#485830,#485900,#485970,#486040,#486110, + #486180,#486250,#486320,#486390,#486460,#486530,#486600,#486670, + #486740,#486810,#486880,#486950,#486961,#486972,#486983,#486994, + #487005,#487016,#487027,#487038,#487049,#487060,#487071,#487141, + #487211,#487281,#487351,#487421,#487491,#487561,#487631,#487701, + #487771,#487841,#487911,#487981,#488051,#488121,#488191,#488261, + #488331,#488342,#488353,#488364,#488375,#488386,#488397,#488408, + #488419,#488430,#488441,#488452,#488522,#488592,#488662,#488732, + #488802,#488872,#488942,#489012,#489082,#489152,#489222,#489292, + #489303,#489314,#489325,#489336,#489406,#489476,#489487,#489498, + #489568,#489638,#489649,#489660,#489730,#489800,#489870,#489940, + #490010,#490080,#490091,#490102,#490113,#490124,#490135,#490146, + #490216,#490227,#490238,#490308,#490378,#490448,#490518,#490588, + #490599,#490610,#490680,#490750,#490820,#490890,#490960,#491030, + #491100,#491170,#491181,#491192,#491262,#491332,#491343,#491354, + #491365,#491435,#491505,#491575,#491645,#491715,#491785,#491855, + #491925,#491995,#492029,#492063,#492097,#492131,#492165,#492199, + #492233,#492267,#492301,#492335,#492369,#492403,#492473,#492507, + #492541,#492575,#492609,#492679,#492749,#492783,#492817,#492887, + #492923,#492957,#492991,#493025,#493059,#493093,#493127,#493161, + #493195,#493229,#493263,#493297,#493331,#493365,#493399,#493433, + #493467,#493501,#493535,#493569,#493603,#493637,#493648,#493659, + #493693,#493727,#493761,#493795,#493865,#493935,#493969,#494003, + #494073,#494143,#494177,#494211,#494281,#494351,#494421,#494455, + #494489,#494559,#494629,#494699,#494769,#494839,#494909,#494979, + #494990,#495001,#495012,#495023,#495093,#495163,#495233),#495303,.T. + ); +#484116 = FACE_BOUND('',#484117,.F.); +#484117 = EDGE_LOOP('',(#484118,#484128,#484136,#484144)); +#484118 = ORIENTED_EDGE('',*,*,#484119,.T.); +#484119 = EDGE_CURVE('',#484120,#484122,#484124,.T.); +#484120 = VERTEX_POINT('',#484121); +#484121 = CARTESIAN_POINT('',(120.,-159.9,1.56)); +#484122 = VERTEX_POINT('',#484123); +#484123 = CARTESIAN_POINT('',(120.,-60.,1.56)); +#484124 = LINE('',#484125,#484126); +#484125 = CARTESIAN_POINT('',(120.,-159.9,1.56)); +#484126 = VECTOR('',#484127,1.); +#484127 = DIRECTION('',(0.,1.,0.)); +#484128 = ORIENTED_EDGE('',*,*,#484129,.T.); +#484129 = EDGE_CURVE('',#484122,#484130,#484132,.T.); +#484130 = VERTEX_POINT('',#484131); +#484131 = CARTESIAN_POINT('',(155.,-60.,1.56)); +#484132 = LINE('',#484133,#484134); +#484133 = CARTESIAN_POINT('',(120.,-60.,1.56)); +#484134 = VECTOR('',#484135,1.); +#484135 = DIRECTION('',(1.,0.,0.)); +#484136 = ORIENTED_EDGE('',*,*,#484137,.T.); +#484137 = EDGE_CURVE('',#484130,#484138,#484140,.T.); +#484138 = VERTEX_POINT('',#484139); +#484139 = CARTESIAN_POINT('',(155.,-159.9,1.56)); +#484140 = LINE('',#484141,#484142); +#484141 = CARTESIAN_POINT('',(155.,-60.,1.56)); +#484142 = VECTOR('',#484143,1.); +#484143 = DIRECTION('',(0.,-1.,0.)); +#484144 = ORIENTED_EDGE('',*,*,#484145,.T.); +#484145 = EDGE_CURVE('',#484138,#484120,#484146,.T.); +#484146 = LINE('',#484147,#484148); +#484147 = CARTESIAN_POINT('',(155.,-159.9,1.56)); +#484148 = VECTOR('',#484149,1.); +#484149 = DIRECTION('',(-1.,0.,0.)); +#484150 = FACE_BOUND('',#484151,.F.); +#484151 = EDGE_LOOP('',(#484152,#484163,#484171,#484180,#484188,#484197, + #484205,#484214)); +#484152 = ORIENTED_EDGE('',*,*,#484153,.T.); +#484153 = EDGE_CURVE('',#484154,#484156,#484158,.T.); +#484154 = VERTEX_POINT('',#484155); +#484155 = CARTESIAN_POINT('',(127.8,-158.775,1.56)); +#484156 = VERTEX_POINT('',#484157); +#484157 = CARTESIAN_POINT('',(127.575,-158.55,1.56)); +#484158 = CIRCLE('',#484159,0.225000087974); +#484159 = AXIS2_PLACEMENT_3D('',#484160,#484161,#484162); +#484160 = CARTESIAN_POINT('',(127.57499991202,-158.7750000879,1.56)); +#484161 = DIRECTION('',(0.,0.,1.)); +#484162 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#484163 = ORIENTED_EDGE('',*,*,#484164,.T.); +#484164 = EDGE_CURVE('',#484156,#484165,#484167,.T.); +#484165 = VERTEX_POINT('',#484166); +#484166 = CARTESIAN_POINT('',(126.725,-158.55,1.56)); +#484167 = LINE('',#484168,#484169); +#484168 = CARTESIAN_POINT('',(127.575,-158.55,1.56)); +#484169 = VECTOR('',#484170,1.); +#484170 = DIRECTION('',(-1.,0.,0.)); +#484171 = ORIENTED_EDGE('',*,*,#484172,.T.); +#484172 = EDGE_CURVE('',#484165,#484173,#484175,.T.); +#484173 = VERTEX_POINT('',#484174); +#484174 = CARTESIAN_POINT('',(126.5,-158.775,1.56)); +#484175 = CIRCLE('',#484176,0.225000087974); +#484176 = AXIS2_PLACEMENT_3D('',#484177,#484178,#484179); +#484177 = CARTESIAN_POINT('',(126.72500008797,-158.7750000879,1.56)); +#484178 = DIRECTION('',(0.,0.,1.)); +#484179 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#484180 = ORIENTED_EDGE('',*,*,#484181,.T.); +#484181 = EDGE_CURVE('',#484173,#484182,#484184,.T.); +#484182 = VERTEX_POINT('',#484183); +#484183 = CARTESIAN_POINT('',(126.5,-159.225,1.56)); +#484184 = LINE('',#484185,#484186); +#484185 = CARTESIAN_POINT('',(126.5,-158.775,1.56)); +#484186 = VECTOR('',#484187,1.); +#484187 = DIRECTION('',(0.,-1.,0.)); +#484188 = ORIENTED_EDGE('',*,*,#484189,.T.); +#484189 = EDGE_CURVE('',#484182,#484190,#484192,.T.); +#484190 = VERTEX_POINT('',#484191); +#484191 = CARTESIAN_POINT('',(126.725,-159.45,1.56)); +#484192 = CIRCLE('',#484193,0.225000087974); +#484193 = AXIS2_PLACEMENT_3D('',#484194,#484195,#484196); +#484194 = CARTESIAN_POINT('',(126.72500008797,-159.224999912,1.56)); +#484195 = DIRECTION('',(0.,0.,1.)); +#484196 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#484197 = ORIENTED_EDGE('',*,*,#484198,.T.); +#484198 = EDGE_CURVE('',#484190,#484199,#484201,.T.); +#484199 = VERTEX_POINT('',#484200); +#484200 = CARTESIAN_POINT('',(127.575,-159.45,1.56)); +#484201 = LINE('',#484202,#484203); +#484202 = CARTESIAN_POINT('',(126.725,-159.45,1.56)); +#484203 = VECTOR('',#484204,1.); +#484204 = DIRECTION('',(1.,0.,0.)); +#484205 = ORIENTED_EDGE('',*,*,#484206,.T.); +#484206 = EDGE_CURVE('',#484199,#484207,#484209,.T.); +#484207 = VERTEX_POINT('',#484208); +#484208 = CARTESIAN_POINT('',(127.8,-159.225,1.56)); +#484209 = CIRCLE('',#484210,0.225000087974); +#484210 = AXIS2_PLACEMENT_3D('',#484211,#484212,#484213); +#484211 = CARTESIAN_POINT('',(127.57499991202,-159.224999912,1.56)); +#484212 = DIRECTION('',(0.,0.,1.)); +#484213 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#484214 = ORIENTED_EDGE('',*,*,#484215,.T.); +#484215 = EDGE_CURVE('',#484207,#484154,#484216,.T.); +#484216 = LINE('',#484217,#484218); +#484217 = CARTESIAN_POINT('',(127.8,-159.225,1.56)); +#484218 = VECTOR('',#484219,1.); +#484219 = DIRECTION('',(0.,1.,0.)); +#484220 = FACE_BOUND('',#484221,.F.); +#484221 = EDGE_LOOP('',(#484222,#484233,#484241,#484250,#484258,#484267, + #484275,#484284)); +#484222 = ORIENTED_EDGE('',*,*,#484223,.T.); +#484223 = EDGE_CURVE('',#484224,#484226,#484228,.T.); +#484224 = VERTEX_POINT('',#484225); +#484225 = CARTESIAN_POINT('',(131.5,-158.775,1.56)); +#484226 = VERTEX_POINT('',#484227); +#484227 = CARTESIAN_POINT('',(131.275,-158.55,1.56)); +#484228 = CIRCLE('',#484229,0.225000087974); +#484229 = AXIS2_PLACEMENT_3D('',#484230,#484231,#484232); +#484230 = CARTESIAN_POINT('',(131.27499991202,-158.7750000879,1.56)); +#484231 = DIRECTION('',(0.,0.,1.)); +#484232 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#484233 = ORIENTED_EDGE('',*,*,#484234,.T.); +#484234 = EDGE_CURVE('',#484226,#484235,#484237,.T.); +#484235 = VERTEX_POINT('',#484236); +#484236 = CARTESIAN_POINT('',(130.425,-158.55,1.56)); +#484237 = LINE('',#484238,#484239); +#484238 = CARTESIAN_POINT('',(131.275,-158.55,1.56)); +#484239 = VECTOR('',#484240,1.); +#484240 = DIRECTION('',(-1.,0.,0.)); +#484241 = ORIENTED_EDGE('',*,*,#484242,.T.); +#484242 = EDGE_CURVE('',#484235,#484243,#484245,.T.); +#484243 = VERTEX_POINT('',#484244); +#484244 = CARTESIAN_POINT('',(130.2,-158.775,1.56)); +#484245 = CIRCLE('',#484246,0.225000087974); +#484246 = AXIS2_PLACEMENT_3D('',#484247,#484248,#484249); +#484247 = CARTESIAN_POINT('',(130.42500008797,-158.7750000879,1.56)); +#484248 = DIRECTION('',(0.,0.,1.)); +#484249 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#484250 = ORIENTED_EDGE('',*,*,#484251,.T.); +#484251 = EDGE_CURVE('',#484243,#484252,#484254,.T.); +#484252 = VERTEX_POINT('',#484253); +#484253 = CARTESIAN_POINT('',(130.2,-159.225,1.56)); +#484254 = LINE('',#484255,#484256); +#484255 = CARTESIAN_POINT('',(130.2,-158.775,1.56)); +#484256 = VECTOR('',#484257,1.); +#484257 = DIRECTION('',(0.,-1.,0.)); +#484258 = ORIENTED_EDGE('',*,*,#484259,.T.); +#484259 = EDGE_CURVE('',#484252,#484260,#484262,.T.); +#484260 = VERTEX_POINT('',#484261); +#484261 = CARTESIAN_POINT('',(130.425,-159.45,1.56)); +#484262 = CIRCLE('',#484263,0.225000087974); +#484263 = AXIS2_PLACEMENT_3D('',#484264,#484265,#484266); +#484264 = CARTESIAN_POINT('',(130.42500008797,-159.224999912,1.56)); +#484265 = DIRECTION('',(0.,0.,1.)); +#484266 = DIRECTION('',(-1.,-3.909955352946E-07,0.)); +#484267 = ORIENTED_EDGE('',*,*,#484268,.T.); +#484268 = EDGE_CURVE('',#484260,#484269,#484271,.T.); +#484269 = VERTEX_POINT('',#484270); +#484270 = CARTESIAN_POINT('',(131.275,-159.45,1.56)); +#484271 = LINE('',#484272,#484273); +#484272 = CARTESIAN_POINT('',(130.425,-159.45,1.56)); +#484273 = VECTOR('',#484274,1.); +#484274 = DIRECTION('',(1.,0.,0.)); +#484275 = ORIENTED_EDGE('',*,*,#484276,.T.); +#484276 = EDGE_CURVE('',#484269,#484277,#484279,.T.); +#484277 = VERTEX_POINT('',#484278); +#484278 = CARTESIAN_POINT('',(131.5,-159.225,1.56)); +#484279 = CIRCLE('',#484280,0.225000087974); +#484280 = AXIS2_PLACEMENT_3D('',#484281,#484282,#484283); +#484281 = CARTESIAN_POINT('',(131.27499991202,-159.224999912,1.56)); +#484282 = DIRECTION('',(0.,0.,1.)); +#484283 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#484284 = ORIENTED_EDGE('',*,*,#484285,.T.); +#484285 = EDGE_CURVE('',#484277,#484224,#484286,.T.); +#484286 = LINE('',#484287,#484288); +#484287 = CARTESIAN_POINT('',(131.5,-159.225,1.56)); +#484288 = VECTOR('',#484289,1.); +#484289 = DIRECTION('',(0.,1.,0.)); +#484290 = FACE_BOUND('',#484291,.F.); +#484291 = EDGE_LOOP('',(#484292,#484303,#484311,#484320)); +#484292 = ORIENTED_EDGE('',*,*,#484293,.T.); +#484293 = EDGE_CURVE('',#484294,#484296,#484298,.T.); +#484294 = VERTEX_POINT('',#484295); +#484295 = CARTESIAN_POINT('',(132.68,-158.45,1.56)); +#484296 = VERTEX_POINT('',#484297); +#484297 = CARTESIAN_POINT('',(133.68,-158.45,1.56)); +#484298 = CIRCLE('',#484299,0.5); +#484299 = AXIS2_PLACEMENT_3D('',#484300,#484301,#484302); +#484300 = CARTESIAN_POINT('',(133.18,-158.4499995566,1.56)); +#484301 = DIRECTION('',(0.,0.,1.)); +#484302 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#484303 = ORIENTED_EDGE('',*,*,#484304,.T.); +#484304 = EDGE_CURVE('',#484296,#484305,#484307,.T.); +#484305 = VERTEX_POINT('',#484306); +#484306 = CARTESIAN_POINT('',(133.68,-157.85,1.56)); +#484307 = LINE('',#484308,#484309); +#484308 = CARTESIAN_POINT('',(133.68,-158.45,1.56)); +#484309 = VECTOR('',#484310,1.); +#484310 = DIRECTION('',(0.,1.,0.)); +#484311 = ORIENTED_EDGE('',*,*,#484312,.T.); +#484312 = EDGE_CURVE('',#484305,#484313,#484315,.T.); +#484313 = VERTEX_POINT('',#484314); +#484314 = CARTESIAN_POINT('',(132.68,-157.85,1.56)); +#484315 = CIRCLE('',#484316,0.500000000001); +#484316 = AXIS2_PLACEMENT_3D('',#484317,#484318,#484319); +#484317 = CARTESIAN_POINT('',(133.18,-157.8499991518,1.56)); +#484318 = DIRECTION('',(0.,0.,1.)); +#484319 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#484320 = ORIENTED_EDGE('',*,*,#484321,.T.); +#484321 = EDGE_CURVE('',#484313,#484294,#484322,.T.); +#484322 = LINE('',#484323,#484324); +#484323 = CARTESIAN_POINT('',(132.68,-157.85,1.56)); +#484324 = VECTOR('',#484325,1.); +#484325 = DIRECTION('',(0.,-1.,0.)); +#484326 = FACE_BOUND('',#484327,.F.); +#484327 = EDGE_LOOP('',(#484328,#484339,#484347,#484356)); +#484328 = ORIENTED_EDGE('',*,*,#484329,.T.); +#484329 = EDGE_CURVE('',#484330,#484332,#484334,.T.); +#484330 = VERTEX_POINT('',#484331); +#484331 = CARTESIAN_POINT('',(141.32,-158.45,1.56)); +#484332 = VERTEX_POINT('',#484333); +#484333 = CARTESIAN_POINT('',(142.32,-158.45,1.56)); +#484334 = CIRCLE('',#484335,0.5); +#484335 = AXIS2_PLACEMENT_3D('',#484336,#484337,#484338); +#484336 = CARTESIAN_POINT('',(141.82,-158.4499995566,1.56)); +#484337 = DIRECTION('',(0.,0.,1.)); +#484338 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#484339 = ORIENTED_EDGE('',*,*,#484340,.T.); +#484340 = EDGE_CURVE('',#484332,#484341,#484343,.T.); +#484341 = VERTEX_POINT('',#484342); +#484342 = CARTESIAN_POINT('',(142.32,-157.85,1.56)); +#484343 = LINE('',#484344,#484345); +#484344 = CARTESIAN_POINT('',(142.32,-158.45,1.56)); +#484345 = VECTOR('',#484346,1.); +#484346 = DIRECTION('',(0.,1.,0.)); +#484347 = ORIENTED_EDGE('',*,*,#484348,.T.); +#484348 = EDGE_CURVE('',#484341,#484349,#484351,.T.); +#484349 = VERTEX_POINT('',#484350); +#484350 = CARTESIAN_POINT('',(141.32,-157.85,1.56)); +#484351 = CIRCLE('',#484352,0.500000000001); +#484352 = AXIS2_PLACEMENT_3D('',#484353,#484354,#484355); +#484353 = CARTESIAN_POINT('',(141.82,-157.8499991518,1.56)); +#484354 = DIRECTION('',(0.,0.,1.)); +#484355 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#484356 = ORIENTED_EDGE('',*,*,#484357,.T.); +#484357 = EDGE_CURVE('',#484349,#484330,#484358,.T.); +#484358 = LINE('',#484359,#484360); +#484359 = CARTESIAN_POINT('',(141.32,-157.85,1.56)); +#484360 = VECTOR('',#484361,1.); +#484361 = DIRECTION('',(0.,-1.,0.)); +#484362 = FACE_BOUND('',#484363,.F.); +#484363 = EDGE_LOOP('',(#484364)); +#484364 = ORIENTED_EDGE('',*,*,#484365,.T.); +#484365 = EDGE_CURVE('',#484366,#484366,#484368,.T.); +#484366 = VERTEX_POINT('',#484367); +#484367 = CARTESIAN_POINT('',(127.325,-157.95,1.56)); +#484368 = CIRCLE('',#484369,0.45); +#484369 = AXIS2_PLACEMENT_3D('',#484370,#484371,#484372); +#484370 = CARTESIAN_POINT('',(126.875,-157.95,1.56)); +#484371 = DIRECTION('',(0.,0.,1.)); +#484372 = DIRECTION('',(1.,0.,-0.)); +#484373 = FACE_BOUND('',#484374,.F.); +#484374 = EDGE_LOOP('',(#484375)); +#484375 = ORIENTED_EDGE('',*,*,#484376,.T.); +#484376 = EDGE_CURVE('',#484377,#484377,#484379,.T.); +#484377 = VERTEX_POINT('',#484378); +#484378 = CARTESIAN_POINT('',(131.575,-157.95,1.56)); +#484379 = CIRCLE('',#484380,0.45); +#484380 = AXIS2_PLACEMENT_3D('',#484381,#484382,#484383); +#484381 = CARTESIAN_POINT('',(131.125,-157.95,1.56)); +#484382 = DIRECTION('',(0.,0.,1.)); +#484383 = DIRECTION('',(1.,0.,-0.)); +#484384 = FACE_BOUND('',#484385,.F.); +#484385 = EDGE_LOOP('',(#484386,#484397,#484405,#484414,#484422,#484431, + #484439,#484448)); +#484386 = ORIENTED_EDGE('',*,*,#484387,.T.); +#484387 = EDGE_CURVE('',#484388,#484390,#484392,.T.); +#484388 = VERTEX_POINT('',#484389); +#484389 = CARTESIAN_POINT('',(144.95,-157.2,1.56)); +#484390 = VERTEX_POINT('',#484391); +#484391 = CARTESIAN_POINT('',(144.8,-157.05,1.56)); +#484392 = CIRCLE('',#484393,0.150000058649); +#484393 = AXIS2_PLACEMENT_3D('',#484394,#484395,#484396); +#484394 = CARTESIAN_POINT('',(144.79999994135,-157.2000000586,1.56)); +#484395 = DIRECTION('',(0.,0.,1.)); +#484396 = DIRECTION('',(1.,3.909950300202E-07,-0.)); +#484397 = ORIENTED_EDGE('',*,*,#484398,.T.); +#484398 = EDGE_CURVE('',#484390,#484399,#484401,.T.); +#484399 = VERTEX_POINT('',#484400); +#484400 = CARTESIAN_POINT('',(143.6,-157.05,1.56)); +#484401 = LINE('',#484402,#484403); +#484402 = CARTESIAN_POINT('',(144.8,-157.05,1.56)); +#484403 = VECTOR('',#484404,1.); +#484404 = DIRECTION('',(-1.,0.,0.)); +#484405 = ORIENTED_EDGE('',*,*,#484406,.T.); +#484406 = EDGE_CURVE('',#484399,#484407,#484409,.T.); +#484407 = VERTEX_POINT('',#484408); +#484408 = CARTESIAN_POINT('',(143.45,-157.2,1.56)); +#484409 = CIRCLE('',#484410,0.150000058649); +#484410 = AXIS2_PLACEMENT_3D('',#484411,#484412,#484413); +#484411 = CARTESIAN_POINT('',(143.60000005864,-157.2000000586,1.56)); +#484412 = DIRECTION('',(0.,0.,1.)); +#484413 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#484414 = ORIENTED_EDGE('',*,*,#484415,.T.); +#484415 = EDGE_CURVE('',#484407,#484416,#484418,.T.); +#484416 = VERTEX_POINT('',#484417); +#484417 = CARTESIAN_POINT('',(143.45,-157.9,1.56)); +#484418 = LINE('',#484419,#484420); +#484419 = CARTESIAN_POINT('',(143.45,-157.2,1.56)); +#484420 = VECTOR('',#484421,1.); +#484421 = DIRECTION('',(0.,-1.,0.)); +#484422 = ORIENTED_EDGE('',*,*,#484423,.T.); +#484423 = EDGE_CURVE('',#484416,#484424,#484426,.T.); +#484424 = VERTEX_POINT('',#484425); +#484425 = CARTESIAN_POINT('',(143.6,-158.05,1.56)); +#484426 = CIRCLE('',#484427,0.150000058649); +#484427 = AXIS2_PLACEMENT_3D('',#484428,#484429,#484430); +#484428 = CARTESIAN_POINT('',(143.60000005864,-157.8999999413,1.56)); +#484429 = DIRECTION('',(0.,0.,1.)); +#484430 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#484431 = ORIENTED_EDGE('',*,*,#484432,.T.); +#484432 = EDGE_CURVE('',#484424,#484433,#484435,.T.); +#484433 = VERTEX_POINT('',#484434); +#484434 = CARTESIAN_POINT('',(144.8,-158.05,1.56)); +#484435 = LINE('',#484436,#484437); +#484436 = CARTESIAN_POINT('',(143.6,-158.05,1.56)); +#484437 = VECTOR('',#484438,1.); +#484438 = DIRECTION('',(1.,0.,0.)); +#484439 = ORIENTED_EDGE('',*,*,#484440,.T.); +#484440 = EDGE_CURVE('',#484433,#484441,#484443,.T.); +#484441 = VERTEX_POINT('',#484442); +#484442 = CARTESIAN_POINT('',(144.95,-157.9,1.56)); +#484443 = CIRCLE('',#484444,0.150000058649); +#484444 = AXIS2_PLACEMENT_3D('',#484445,#484446,#484447); +#484445 = CARTESIAN_POINT('',(144.79999994135,-157.8999999413,1.56)); +#484446 = DIRECTION('',(0.,0.,1.)); +#484447 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#484448 = ORIENTED_EDGE('',*,*,#484449,.T.); +#484449 = EDGE_CURVE('',#484441,#484388,#484450,.T.); +#484450 = LINE('',#484451,#484452); +#484451 = CARTESIAN_POINT('',(144.95,-157.9,1.56)); +#484452 = VECTOR('',#484453,1.); +#484453 = DIRECTION('',(0.,1.,0.)); +#484454 = FACE_BOUND('',#484455,.F.); +#484455 = EDGE_LOOP('',(#484456,#484467,#484475,#484484,#484492,#484501, + #484509,#484518)); +#484456 = ORIENTED_EDGE('',*,*,#484457,.T.); +#484457 = EDGE_CURVE('',#484458,#484460,#484462,.T.); +#484458 = VERTEX_POINT('',#484459); +#484459 = CARTESIAN_POINT('',(148.25,-157.2,1.56)); +#484460 = VERTEX_POINT('',#484461); +#484461 = CARTESIAN_POINT('',(148.1,-157.05,1.56)); +#484462 = CIRCLE('',#484463,0.150000058649); +#484463 = AXIS2_PLACEMENT_3D('',#484464,#484465,#484466); +#484464 = CARTESIAN_POINT('',(148.09999994135,-157.2000000586,1.56)); +#484465 = DIRECTION('',(0.,0.,1.)); +#484466 = DIRECTION('',(1.,3.90995219498E-07,-0.)); +#484467 = ORIENTED_EDGE('',*,*,#484468,.T.); +#484468 = EDGE_CURVE('',#484460,#484469,#484471,.T.); +#484469 = VERTEX_POINT('',#484470); +#484470 = CARTESIAN_POINT('',(146.9,-157.05,1.56)); +#484471 = LINE('',#484472,#484473); +#484472 = CARTESIAN_POINT('',(148.1,-157.05,1.56)); +#484473 = VECTOR('',#484474,1.); +#484474 = DIRECTION('',(-1.,0.,0.)); +#484475 = ORIENTED_EDGE('',*,*,#484476,.T.); +#484476 = EDGE_CURVE('',#484469,#484477,#484479,.T.); +#484477 = VERTEX_POINT('',#484478); +#484478 = CARTESIAN_POINT('',(146.75,-157.2,1.56)); +#484479 = CIRCLE('',#484480,0.150000058649); +#484480 = AXIS2_PLACEMENT_3D('',#484481,#484482,#484483); +#484481 = CARTESIAN_POINT('',(146.90000005864,-157.2000000586,1.56)); +#484482 = DIRECTION('',(0.,0.,1.)); +#484483 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#484484 = ORIENTED_EDGE('',*,*,#484485,.T.); +#484485 = EDGE_CURVE('',#484477,#484486,#484488,.T.); +#484486 = VERTEX_POINT('',#484487); +#484487 = CARTESIAN_POINT('',(146.75,-157.9,1.56)); +#484488 = LINE('',#484489,#484490); +#484489 = CARTESIAN_POINT('',(146.75,-157.2,1.56)); +#484490 = VECTOR('',#484491,1.); +#484491 = DIRECTION('',(0.,-1.,0.)); +#484492 = ORIENTED_EDGE('',*,*,#484493,.T.); +#484493 = EDGE_CURVE('',#484486,#484494,#484496,.T.); +#484494 = VERTEX_POINT('',#484495); +#484495 = CARTESIAN_POINT('',(146.9,-158.05,1.56)); +#484496 = CIRCLE('',#484497,0.150000058649); +#484497 = AXIS2_PLACEMENT_3D('',#484498,#484499,#484500); +#484498 = CARTESIAN_POINT('',(146.90000005864,-157.8999999413,1.56)); +#484499 = DIRECTION('',(0.,0.,1.)); +#484500 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#484501 = ORIENTED_EDGE('',*,*,#484502,.T.); +#484502 = EDGE_CURVE('',#484494,#484503,#484505,.T.); +#484503 = VERTEX_POINT('',#484504); +#484504 = CARTESIAN_POINT('',(148.1,-158.05,1.56)); +#484505 = LINE('',#484506,#484507); +#484506 = CARTESIAN_POINT('',(146.9,-158.05,1.56)); +#484507 = VECTOR('',#484508,1.); +#484508 = DIRECTION('',(1.,0.,0.)); +#484509 = ORIENTED_EDGE('',*,*,#484510,.T.); +#484510 = EDGE_CURVE('',#484503,#484511,#484513,.T.); +#484511 = VERTEX_POINT('',#484512); +#484512 = CARTESIAN_POINT('',(148.25,-157.9,1.56)); +#484513 = CIRCLE('',#484514,0.150000058649); +#484514 = AXIS2_PLACEMENT_3D('',#484515,#484516,#484517); +#484515 = CARTESIAN_POINT('',(148.09999994135,-157.8999999413,1.56)); +#484516 = DIRECTION('',(0.,0.,1.)); +#484517 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#484518 = ORIENTED_EDGE('',*,*,#484519,.T.); +#484519 = EDGE_CURVE('',#484511,#484458,#484520,.T.); +#484520 = LINE('',#484521,#484522); +#484521 = CARTESIAN_POINT('',(148.25,-157.9,1.56)); +#484522 = VECTOR('',#484523,1.); +#484523 = DIRECTION('',(0.,1.,0.)); +#484524 = FACE_BOUND('',#484525,.F.); +#484525 = EDGE_LOOP('',(#484526,#484537,#484545,#484554,#484562,#484571, + #484579,#484588)); +#484526 = ORIENTED_EDGE('',*,*,#484527,.T.); +#484527 = EDGE_CURVE('',#484528,#484530,#484532,.T.); +#484528 = VERTEX_POINT('',#484529); +#484529 = CARTESIAN_POINT('',(128.15,-156.3375,1.56)); +#484530 = VERTEX_POINT('',#484531); +#484531 = CARTESIAN_POINT('',(127.9625,-156.15,1.56)); +#484532 = CIRCLE('',#484533,0.187498366229); +#484533 = AXIS2_PLACEMENT_3D('',#484534,#484535,#484536); +#484534 = CARTESIAN_POINT('',(127.96250163377,-156.3374983662,1.56)); +#484535 = DIRECTION('',(0.,0.,1.)); +#484536 = DIRECTION('',(0.999999999962,-8.713558430711E-06,0.)); +#484537 = ORIENTED_EDGE('',*,*,#484538,.T.); +#484538 = EDGE_CURVE('',#484530,#484539,#484541,.T.); +#484539 = VERTEX_POINT('',#484540); +#484540 = CARTESIAN_POINT('',(127.5875,-156.15,1.56)); +#484541 = LINE('',#484542,#484543); +#484542 = CARTESIAN_POINT('',(127.9625,-156.15,1.56)); +#484543 = VECTOR('',#484544,1.); +#484544 = DIRECTION('',(-1.,0.,0.)); +#484545 = ORIENTED_EDGE('',*,*,#484546,.T.); +#484546 = EDGE_CURVE('',#484539,#484547,#484549,.T.); +#484547 = VERTEX_POINT('',#484548); +#484548 = CARTESIAN_POINT('',(127.4,-156.3375,1.56)); +#484549 = CIRCLE('',#484550,0.187498366229); +#484550 = AXIS2_PLACEMENT_3D('',#484551,#484552,#484553); +#484551 = CARTESIAN_POINT('',(127.58749836622,-156.3374983662,1.56)); +#484552 = DIRECTION('',(0.,0.,1.)); +#484553 = DIRECTION('',(8.713558658088E-06,0.999999999962,-0.)); +#484554 = ORIENTED_EDGE('',*,*,#484555,.T.); +#484555 = EDGE_CURVE('',#484547,#484556,#484558,.T.); +#484556 = VERTEX_POINT('',#484557); +#484557 = CARTESIAN_POINT('',(127.4,-157.7625,1.56)); +#484558 = LINE('',#484559,#484560); +#484559 = CARTESIAN_POINT('',(127.4,-156.3375,1.56)); +#484560 = VECTOR('',#484561,1.); +#484561 = DIRECTION('',(0.,-1.,0.)); +#484562 = ORIENTED_EDGE('',*,*,#484563,.T.); +#484563 = EDGE_CURVE('',#484556,#484564,#484566,.T.); +#484564 = VERTEX_POINT('',#484565); +#484565 = CARTESIAN_POINT('',(127.5875,-157.95,1.56)); +#484566 = CIRCLE('',#484567,0.187498366229); +#484567 = AXIS2_PLACEMENT_3D('',#484568,#484569,#484570); +#484568 = CARTESIAN_POINT('',(127.58749836622,-157.7625016337,1.56)); +#484569 = DIRECTION('',(0.,0.,1.)); +#484570 = DIRECTION('',(-0.999999999962,8.713558582297E-06,0.)); +#484571 = ORIENTED_EDGE('',*,*,#484572,.T.); +#484572 = EDGE_CURVE('',#484564,#484573,#484575,.T.); +#484573 = VERTEX_POINT('',#484574); +#484574 = CARTESIAN_POINT('',(127.9625,-157.95,1.56)); +#484575 = LINE('',#484576,#484577); +#484576 = CARTESIAN_POINT('',(127.5875,-157.95,1.56)); +#484577 = VECTOR('',#484578,1.); +#484578 = DIRECTION('',(1.,0.,0.)); +#484579 = ORIENTED_EDGE('',*,*,#484580,.T.); +#484580 = EDGE_CURVE('',#484573,#484581,#484583,.T.); +#484581 = VERTEX_POINT('',#484582); +#484582 = CARTESIAN_POINT('',(128.15,-157.7625,1.56)); +#484583 = CIRCLE('',#484584,0.187498366229); +#484584 = AXIS2_PLACEMENT_3D('',#484585,#484586,#484587); +#484585 = CARTESIAN_POINT('',(127.96250163377,-157.7625016337,1.56)); +#484586 = DIRECTION('',(0.,0.,1.)); +#484587 = DIRECTION('',(-8.713558430711E-06,-0.999999999962,0.)); +#484588 = ORIENTED_EDGE('',*,*,#484589,.T.); +#484589 = EDGE_CURVE('',#484581,#484528,#484590,.T.); +#484590 = LINE('',#484591,#484592); +#484591 = CARTESIAN_POINT('',(128.15,-157.7625,1.56)); +#484592 = VECTOR('',#484593,1.); +#484593 = DIRECTION('',(0.,1.,0.)); +#484594 = FACE_BOUND('',#484595,.F.); +#484595 = EDGE_LOOP('',(#484596,#484607,#484615,#484624,#484632,#484641, + #484649,#484658)); +#484596 = ORIENTED_EDGE('',*,*,#484597,.T.); +#484597 = EDGE_CURVE('',#484598,#484600,#484602,.T.); +#484598 = VERTEX_POINT('',#484599); +#484599 = CARTESIAN_POINT('',(129.3,-156.3,1.56)); +#484600 = VERTEX_POINT('',#484601); +#484601 = CARTESIAN_POINT('',(129.15,-156.15,1.56)); +#484602 = CIRCLE('',#484603,0.150000058649); +#484603 = AXIS2_PLACEMENT_3D('',#484604,#484605,#484606); +#484604 = CARTESIAN_POINT('',(129.14999994135,-156.3000000586,1.56)); +#484605 = DIRECTION('',(0.,0.,1.)); +#484606 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#484607 = ORIENTED_EDGE('',*,*,#484608,.T.); +#484608 = EDGE_CURVE('',#484600,#484609,#484611,.T.); +#484609 = VERTEX_POINT('',#484610); +#484610 = CARTESIAN_POINT('',(128.85,-156.15,1.56)); +#484611 = LINE('',#484612,#484613); +#484612 = CARTESIAN_POINT('',(129.15,-156.15,1.56)); +#484613 = VECTOR('',#484614,1.); +#484614 = DIRECTION('',(-1.,0.,0.)); +#484615 = ORIENTED_EDGE('',*,*,#484616,.T.); +#484616 = EDGE_CURVE('',#484609,#484617,#484619,.T.); +#484617 = VERTEX_POINT('',#484618); +#484618 = CARTESIAN_POINT('',(128.7,-156.3,1.56)); +#484619 = CIRCLE('',#484620,0.150000058649); +#484620 = AXIS2_PLACEMENT_3D('',#484621,#484622,#484623); +#484621 = CARTESIAN_POINT('',(128.85000005864,-156.3000000586,1.56)); +#484622 = DIRECTION('',(0.,0.,1.)); +#484623 = DIRECTION('',(-3.909955984539E-07,1.,0.)); +#484624 = ORIENTED_EDGE('',*,*,#484625,.T.); +#484625 = EDGE_CURVE('',#484617,#484626,#484628,.T.); +#484626 = VERTEX_POINT('',#484627); +#484627 = CARTESIAN_POINT('',(128.7,-157.8,1.56)); +#484628 = LINE('',#484629,#484630); +#484629 = CARTESIAN_POINT('',(128.7,-156.3,1.56)); +#484630 = VECTOR('',#484631,1.); +#484631 = DIRECTION('',(0.,-1.,0.)); +#484632 = ORIENTED_EDGE('',*,*,#484633,.T.); +#484633 = EDGE_CURVE('',#484626,#484634,#484636,.T.); +#484634 = VERTEX_POINT('',#484635); +#484635 = CARTESIAN_POINT('',(128.85,-157.95,1.56)); +#484636 = CIRCLE('',#484637,0.150000058649); +#484637 = AXIS2_PLACEMENT_3D('',#484638,#484639,#484640); +#484638 = CARTESIAN_POINT('',(128.85000005864,-157.7999999413,1.56)); +#484639 = DIRECTION('',(0.,0.,1.)); +#484640 = DIRECTION('',(-1.,-3.90995219498E-07,0.)); +#484641 = ORIENTED_EDGE('',*,*,#484642,.T.); +#484642 = EDGE_CURVE('',#484634,#484643,#484645,.T.); +#484643 = VERTEX_POINT('',#484644); +#484644 = CARTESIAN_POINT('',(129.15,-157.95,1.56)); +#484645 = LINE('',#484646,#484647); +#484646 = CARTESIAN_POINT('',(128.85,-157.95,1.56)); +#484647 = VECTOR('',#484648,1.); +#484648 = DIRECTION('',(1.,0.,0.)); +#484649 = ORIENTED_EDGE('',*,*,#484650,.T.); +#484650 = EDGE_CURVE('',#484643,#484651,#484653,.T.); +#484651 = VERTEX_POINT('',#484652); +#484652 = CARTESIAN_POINT('',(129.3,-157.8,1.56)); +#484653 = CIRCLE('',#484654,0.150000058649); +#484654 = AXIS2_PLACEMENT_3D('',#484655,#484656,#484657); +#484655 = CARTESIAN_POINT('',(129.14999994135,-157.7999999413,1.56)); +#484656 = DIRECTION('',(0.,0.,1.)); +#484657 = DIRECTION('',(3.909952194981E-07,-1.,0.)); +#484658 = ORIENTED_EDGE('',*,*,#484659,.T.); +#484659 = EDGE_CURVE('',#484651,#484598,#484660,.T.); +#484660 = LINE('',#484661,#484662); +#484661 = CARTESIAN_POINT('',(129.3,-157.8,1.56)); +#484662 = VECTOR('',#484663,1.); +#484663 = DIRECTION('',(0.,1.,0.)); +#484664 = FACE_BOUND('',#484665,.F.); +#484665 = EDGE_LOOP('',(#484666,#484677,#484685,#484694,#484702,#484711, + #484719,#484728)); +#484666 = ORIENTED_EDGE('',*,*,#484667,.T.); +#484667 = EDGE_CURVE('',#484668,#484670,#484672,.T.); +#484668 = VERTEX_POINT('',#484669); +#484669 = CARTESIAN_POINT('',(130.6,-156.3375,1.56)); +#484670 = VERTEX_POINT('',#484671); +#484671 = CARTESIAN_POINT('',(130.4125,-156.15,1.56)); +#484672 = CIRCLE('',#484673,0.187498366229); +#484673 = AXIS2_PLACEMENT_3D('',#484674,#484675,#484676); +#484674 = CARTESIAN_POINT('',(130.41250163377,-156.3374983662,1.56)); +#484675 = DIRECTION('',(0.,0.,1.)); +#484676 = DIRECTION('',(0.999999999962,-8.713558582296E-06,0.)); +#484677 = ORIENTED_EDGE('',*,*,#484678,.T.); +#484678 = EDGE_CURVE('',#484670,#484679,#484681,.T.); +#484679 = VERTEX_POINT('',#484680); +#484680 = CARTESIAN_POINT('',(130.0375,-156.15,1.56)); +#484681 = LINE('',#484682,#484683); +#484682 = CARTESIAN_POINT('',(130.4125,-156.15,1.56)); +#484683 = VECTOR('',#484684,1.); +#484684 = DIRECTION('',(-1.,0.,0.)); +#484685 = ORIENTED_EDGE('',*,*,#484686,.T.); +#484686 = EDGE_CURVE('',#484679,#484687,#484689,.T.); +#484687 = VERTEX_POINT('',#484688); +#484688 = CARTESIAN_POINT('',(129.85,-156.3375,1.56)); +#484689 = CIRCLE('',#484690,0.187498366229); +#484690 = AXIS2_PLACEMENT_3D('',#484691,#484692,#484693); +#484691 = CARTESIAN_POINT('',(130.03749836622,-156.3374983662,1.56)); +#484692 = DIRECTION('',(0.,0.,1.)); +#484693 = DIRECTION('',(8.713558430711E-06,0.999999999962,-0.)); +#484694 = ORIENTED_EDGE('',*,*,#484695,.T.); +#484695 = EDGE_CURVE('',#484687,#484696,#484698,.T.); +#484696 = VERTEX_POINT('',#484697); +#484697 = CARTESIAN_POINT('',(129.85,-157.7625,1.56)); +#484698 = LINE('',#484699,#484700); +#484699 = CARTESIAN_POINT('',(129.85,-156.3375,1.56)); +#484700 = VECTOR('',#484701,1.); +#484701 = DIRECTION('',(0.,-1.,0.)); +#484702 = ORIENTED_EDGE('',*,*,#484703,.T.); +#484703 = EDGE_CURVE('',#484696,#484704,#484706,.T.); +#484704 = VERTEX_POINT('',#484705); +#484705 = CARTESIAN_POINT('',(130.0375,-157.95,1.56)); +#484706 = CIRCLE('',#484707,0.187498366229); +#484707 = AXIS2_PLACEMENT_3D('',#484708,#484709,#484710); +#484708 = CARTESIAN_POINT('',(130.03749836622,-157.7625016337,1.56)); +#484709 = DIRECTION('',(0.,0.,1.)); +#484710 = DIRECTION('',(-0.999999999962,8.713558430711E-06,0.)); +#484711 = ORIENTED_EDGE('',*,*,#484712,.T.); +#484712 = EDGE_CURVE('',#484704,#484713,#484715,.T.); +#484713 = VERTEX_POINT('',#484714); +#484714 = CARTESIAN_POINT('',(130.4125,-157.95,1.56)); +#484715 = LINE('',#484716,#484717); +#484716 = CARTESIAN_POINT('',(130.0375,-157.95,1.56)); +#484717 = VECTOR('',#484718,1.); +#484718 = DIRECTION('',(1.,0.,0.)); +#484719 = ORIENTED_EDGE('',*,*,#484720,.T.); +#484720 = EDGE_CURVE('',#484713,#484721,#484723,.T.); +#484721 = VERTEX_POINT('',#484722); +#484722 = CARTESIAN_POINT('',(130.6,-157.7625,1.56)); +#484723 = CIRCLE('',#484724,0.187498366229); +#484724 = AXIS2_PLACEMENT_3D('',#484725,#484726,#484727); +#484725 = CARTESIAN_POINT('',(130.41250163377,-157.7625016337,1.56)); +#484726 = DIRECTION('',(0.,0.,1.)); +#484727 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#484728 = ORIENTED_EDGE('',*,*,#484729,.T.); +#484729 = EDGE_CURVE('',#484721,#484668,#484730,.T.); +#484730 = LINE('',#484731,#484732); +#484731 = CARTESIAN_POINT('',(130.6,-157.7625,1.56)); +#484732 = VECTOR('',#484733,1.); +#484733 = DIRECTION('',(0.,1.,0.)); +#484734 = FACE_BOUND('',#484735,.F.); +#484735 = EDGE_LOOP('',(#484736)); +#484736 = ORIENTED_EDGE('',*,*,#484737,.T.); +#484737 = EDGE_CURVE('',#484738,#484738,#484740,.T.); +#484738 = VERTEX_POINT('',#484739); +#484739 = CARTESIAN_POINT('',(124.349999,-156.5,1.56)); +#484740 = CIRCLE('',#484741,1.349999); +#484741 = AXIS2_PLACEMENT_3D('',#484742,#484743,#484744); +#484742 = CARTESIAN_POINT('',(123.,-156.5,1.56)); +#484743 = DIRECTION('',(0.,0.,1.)); +#484744 = DIRECTION('',(1.,0.,-0.)); +#484745 = FACE_BOUND('',#484746,.F.); +#484746 = EDGE_LOOP('',(#484747)); +#484747 = ORIENTED_EDGE('',*,*,#484748,.T.); +#484748 = EDGE_CURVE('',#484749,#484749,#484751,.T.); +#484749 = VERTEX_POINT('',#484750); +#484750 = CARTESIAN_POINT('',(153.349999,-156.5,1.56)); +#484751 = CIRCLE('',#484752,1.349999); +#484752 = AXIS2_PLACEMENT_3D('',#484753,#484754,#484755); +#484753 = CARTESIAN_POINT('',(152.,-156.5,1.56)); +#484754 = DIRECTION('',(0.,0.,1.)); +#484755 = DIRECTION('',(1.,0.,-0.)); +#484756 = FACE_BOUND('',#484757,.F.); +#484757 = EDGE_LOOP('',(#484758,#484769,#484777,#484786,#484794,#484803, + #484811,#484820)); +#484758 = ORIENTED_EDGE('',*,*,#484759,.T.); +#484759 = EDGE_CURVE('',#484760,#484762,#484764,.T.); +#484760 = VERTEX_POINT('',#484761); +#484761 = CARTESIAN_POINT('',(144.95,-155.4,1.56)); +#484762 = VERTEX_POINT('',#484763); +#484763 = CARTESIAN_POINT('',(144.8,-155.25,1.56)); +#484764 = CIRCLE('',#484765,0.150000058649); +#484765 = AXIS2_PLACEMENT_3D('',#484766,#484767,#484768); +#484766 = CARTESIAN_POINT('',(144.79999994135,-155.4000000586,1.56)); +#484767 = DIRECTION('',(0.,0.,1.)); +#484768 = DIRECTION('',(1.,3.909952194981E-07,-0.)); +#484769 = ORIENTED_EDGE('',*,*,#484770,.T.); +#484770 = EDGE_CURVE('',#484762,#484771,#484773,.T.); +#484771 = VERTEX_POINT('',#484772); +#484772 = CARTESIAN_POINT('',(143.6,-155.25,1.56)); +#484773 = LINE('',#484774,#484775); +#484774 = CARTESIAN_POINT('',(144.8,-155.25,1.56)); +#484775 = VECTOR('',#484776,1.); +#484776 = DIRECTION('',(-1.,0.,0.)); +#484777 = ORIENTED_EDGE('',*,*,#484778,.T.); +#484778 = EDGE_CURVE('',#484771,#484779,#484781,.T.); +#484779 = VERTEX_POINT('',#484780); +#484780 = CARTESIAN_POINT('',(143.45,-155.4,1.56)); +#484781 = CIRCLE('',#484782,0.150000058649); +#484782 = AXIS2_PLACEMENT_3D('',#484783,#484784,#484785); +#484783 = CARTESIAN_POINT('',(143.60000005864,-155.4000000586,1.56)); +#484784 = DIRECTION('',(0.,0.,1.)); +#484785 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#484786 = ORIENTED_EDGE('',*,*,#484787,.T.); +#484787 = EDGE_CURVE('',#484779,#484788,#484790,.T.); +#484788 = VERTEX_POINT('',#484789); +#484789 = CARTESIAN_POINT('',(143.45,-156.1,1.56)); +#484790 = LINE('',#484791,#484792); +#484791 = CARTESIAN_POINT('',(143.45,-155.4,1.56)); +#484792 = VECTOR('',#484793,1.); +#484793 = DIRECTION('',(0.,-1.,0.)); +#484794 = ORIENTED_EDGE('',*,*,#484795,.T.); +#484795 = EDGE_CURVE('',#484788,#484796,#484798,.T.); +#484796 = VERTEX_POINT('',#484797); +#484797 = CARTESIAN_POINT('',(143.6,-156.25,1.56)); +#484798 = CIRCLE('',#484799,0.150000058649); +#484799 = AXIS2_PLACEMENT_3D('',#484800,#484801,#484802); +#484800 = CARTESIAN_POINT('',(143.60000005864,-156.0999999413,1.56)); +#484801 = DIRECTION('',(0.,0.,1.)); +#484802 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#484803 = ORIENTED_EDGE('',*,*,#484804,.T.); +#484804 = EDGE_CURVE('',#484796,#484805,#484807,.T.); +#484805 = VERTEX_POINT('',#484806); +#484806 = CARTESIAN_POINT('',(144.8,-156.25,1.56)); +#484807 = LINE('',#484808,#484809); +#484808 = CARTESIAN_POINT('',(143.6,-156.25,1.56)); +#484809 = VECTOR('',#484810,1.); +#484810 = DIRECTION('',(1.,0.,0.)); +#484811 = ORIENTED_EDGE('',*,*,#484812,.T.); +#484812 = EDGE_CURVE('',#484805,#484813,#484815,.T.); +#484813 = VERTEX_POINT('',#484814); +#484814 = CARTESIAN_POINT('',(144.95,-156.1,1.56)); +#484815 = CIRCLE('',#484816,0.150000058649); +#484816 = AXIS2_PLACEMENT_3D('',#484817,#484818,#484819); +#484817 = CARTESIAN_POINT('',(144.79999994135,-156.0999999413,1.56)); +#484818 = DIRECTION('',(0.,0.,1.)); +#484819 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#484820 = ORIENTED_EDGE('',*,*,#484821,.T.); +#484821 = EDGE_CURVE('',#484813,#484760,#484822,.T.); +#484822 = LINE('',#484823,#484824); +#484823 = CARTESIAN_POINT('',(144.95,-156.1,1.56)); +#484824 = VECTOR('',#484825,1.); +#484825 = DIRECTION('',(0.,1.,0.)); +#484826 = FACE_BOUND('',#484827,.F.); +#484827 = EDGE_LOOP('',(#484828,#484839,#484847,#484856,#484864,#484873, + #484881,#484890)); +#484828 = ORIENTED_EDGE('',*,*,#484829,.T.); +#484829 = EDGE_CURVE('',#484830,#484832,#484834,.T.); +#484830 = VERTEX_POINT('',#484831); +#484831 = CARTESIAN_POINT('',(148.25,-155.4,1.56)); +#484832 = VERTEX_POINT('',#484833); +#484833 = CARTESIAN_POINT('',(148.1,-155.25,1.56)); +#484834 = CIRCLE('',#484835,0.150000058649); +#484835 = AXIS2_PLACEMENT_3D('',#484836,#484837,#484838); +#484836 = CARTESIAN_POINT('',(148.09999994135,-155.4000000586,1.56)); +#484837 = DIRECTION('',(0.,0.,1.)); +#484838 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#484839 = ORIENTED_EDGE('',*,*,#484840,.T.); +#484840 = EDGE_CURVE('',#484832,#484841,#484843,.T.); +#484841 = VERTEX_POINT('',#484842); +#484842 = CARTESIAN_POINT('',(146.9,-155.25,1.56)); +#484843 = LINE('',#484844,#484845); +#484844 = CARTESIAN_POINT('',(148.1,-155.25,1.56)); +#484845 = VECTOR('',#484846,1.); +#484846 = DIRECTION('',(-1.,0.,0.)); +#484847 = ORIENTED_EDGE('',*,*,#484848,.T.); +#484848 = EDGE_CURVE('',#484841,#484849,#484851,.T.); +#484849 = VERTEX_POINT('',#484850); +#484850 = CARTESIAN_POINT('',(146.75,-155.4,1.56)); +#484851 = CIRCLE('',#484852,0.150000058649); +#484852 = AXIS2_PLACEMENT_3D('',#484853,#484854,#484855); +#484853 = CARTESIAN_POINT('',(146.90000005864,-155.4000000586,1.56)); +#484854 = DIRECTION('',(0.,0.,1.)); +#484855 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#484856 = ORIENTED_EDGE('',*,*,#484857,.T.); +#484857 = EDGE_CURVE('',#484849,#484858,#484860,.T.); +#484858 = VERTEX_POINT('',#484859); +#484859 = CARTESIAN_POINT('',(146.75,-156.1,1.56)); +#484860 = LINE('',#484861,#484862); +#484861 = CARTESIAN_POINT('',(146.75,-155.4,1.56)); +#484862 = VECTOR('',#484863,1.); +#484863 = DIRECTION('',(0.,-1.,0.)); +#484864 = ORIENTED_EDGE('',*,*,#484865,.T.); +#484865 = EDGE_CURVE('',#484858,#484866,#484868,.T.); +#484866 = VERTEX_POINT('',#484867); +#484867 = CARTESIAN_POINT('',(146.9,-156.25,1.56)); +#484868 = CIRCLE('',#484869,0.150000058649); +#484869 = AXIS2_PLACEMENT_3D('',#484870,#484871,#484872); +#484870 = CARTESIAN_POINT('',(146.90000005864,-156.0999999413,1.56)); +#484871 = DIRECTION('',(0.,0.,1.)); +#484872 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#484873 = ORIENTED_EDGE('',*,*,#484874,.T.); +#484874 = EDGE_CURVE('',#484866,#484875,#484877,.T.); +#484875 = VERTEX_POINT('',#484876); +#484876 = CARTESIAN_POINT('',(148.1,-156.25,1.56)); +#484877 = LINE('',#484878,#484879); +#484878 = CARTESIAN_POINT('',(146.9,-156.25,1.56)); +#484879 = VECTOR('',#484880,1.); +#484880 = DIRECTION('',(1.,0.,0.)); +#484881 = ORIENTED_EDGE('',*,*,#484882,.T.); +#484882 = EDGE_CURVE('',#484875,#484883,#484885,.T.); +#484883 = VERTEX_POINT('',#484884); +#484884 = CARTESIAN_POINT('',(148.25,-156.1,1.56)); +#484885 = CIRCLE('',#484886,0.150000058649); +#484886 = AXIS2_PLACEMENT_3D('',#484887,#484888,#484889); +#484887 = CARTESIAN_POINT('',(148.09999994135,-156.0999999413,1.56)); +#484888 = DIRECTION('',(0.,0.,1.)); +#484889 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#484890 = ORIENTED_EDGE('',*,*,#484891,.T.); +#484891 = EDGE_CURVE('',#484883,#484830,#484892,.T.); +#484892 = LINE('',#484893,#484894); +#484893 = CARTESIAN_POINT('',(148.25,-156.1,1.56)); +#484894 = VECTOR('',#484895,1.); +#484895 = DIRECTION('',(0.,1.,0.)); +#484896 = FACE_BOUND('',#484897,.F.); +#484897 = EDGE_LOOP('',(#484898,#484909,#484917,#484926)); +#484898 = ORIENTED_EDGE('',*,*,#484899,.T.); +#484899 = EDGE_CURVE('',#484900,#484902,#484904,.T.); +#484900 = VERTEX_POINT('',#484901); +#484901 = CARTESIAN_POINT('',(132.68,-154.52,1.56)); +#484902 = VERTEX_POINT('',#484903); +#484903 = CARTESIAN_POINT('',(133.68,-154.52,1.56)); +#484904 = CIRCLE('',#484905,0.5); +#484905 = AXIS2_PLACEMENT_3D('',#484906,#484907,#484908); +#484906 = CARTESIAN_POINT('',(133.18,-154.5199995566,1.56)); +#484907 = DIRECTION('',(0.,0.,1.)); +#484908 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#484909 = ORIENTED_EDGE('',*,*,#484910,.T.); +#484910 = EDGE_CURVE('',#484902,#484911,#484913,.T.); +#484911 = VERTEX_POINT('',#484912); +#484912 = CARTESIAN_POINT('',(133.68,-153.42,1.56)); +#484913 = LINE('',#484914,#484915); +#484914 = CARTESIAN_POINT('',(133.68,-154.52,1.56)); +#484915 = VECTOR('',#484916,1.); +#484916 = DIRECTION('',(0.,1.,0.)); +#484917 = ORIENTED_EDGE('',*,*,#484918,.T.); +#484918 = EDGE_CURVE('',#484911,#484919,#484921,.T.); +#484919 = VERTEX_POINT('',#484920); +#484920 = CARTESIAN_POINT('',(132.68,-153.42,1.56)); +#484921 = CIRCLE('',#484922,0.500000000001); +#484922 = AXIS2_PLACEMENT_3D('',#484923,#484924,#484925); +#484923 = CARTESIAN_POINT('',(133.18,-153.4199991518,1.56)); +#484924 = DIRECTION('',(0.,0.,1.)); +#484925 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#484926 = ORIENTED_EDGE('',*,*,#484927,.T.); +#484927 = EDGE_CURVE('',#484919,#484900,#484928,.T.); +#484928 = LINE('',#484929,#484930); +#484929 = CARTESIAN_POINT('',(132.68,-153.42,1.56)); +#484930 = VECTOR('',#484931,1.); +#484931 = DIRECTION('',(0.,-1.,0.)); +#484932 = FACE_BOUND('',#484933,.F.); +#484933 = EDGE_LOOP('',(#484934,#484945,#484953,#484962)); +#484934 = ORIENTED_EDGE('',*,*,#484935,.T.); +#484935 = EDGE_CURVE('',#484936,#484938,#484940,.T.); +#484936 = VERTEX_POINT('',#484937); +#484937 = CARTESIAN_POINT('',(141.32,-154.52,1.56)); +#484938 = VERTEX_POINT('',#484939); +#484939 = CARTESIAN_POINT('',(142.32,-154.52,1.56)); +#484940 = CIRCLE('',#484941,0.5); +#484941 = AXIS2_PLACEMENT_3D('',#484942,#484943,#484944); +#484942 = CARTESIAN_POINT('',(141.82,-154.5199995566,1.56)); +#484943 = DIRECTION('',(0.,0.,1.)); +#484944 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#484945 = ORIENTED_EDGE('',*,*,#484946,.T.); +#484946 = EDGE_CURVE('',#484938,#484947,#484949,.T.); +#484947 = VERTEX_POINT('',#484948); +#484948 = CARTESIAN_POINT('',(142.32,-153.42,1.56)); +#484949 = LINE('',#484950,#484951); +#484950 = CARTESIAN_POINT('',(142.32,-154.52,1.56)); +#484951 = VECTOR('',#484952,1.); +#484952 = DIRECTION('',(0.,1.,0.)); +#484953 = ORIENTED_EDGE('',*,*,#484954,.T.); +#484954 = EDGE_CURVE('',#484947,#484955,#484957,.T.); +#484955 = VERTEX_POINT('',#484956); +#484956 = CARTESIAN_POINT('',(141.32,-153.42,1.56)); +#484957 = CIRCLE('',#484958,0.500000000001); +#484958 = AXIS2_PLACEMENT_3D('',#484959,#484960,#484961); +#484959 = CARTESIAN_POINT('',(141.82,-153.4199991518,1.56)); +#484960 = DIRECTION('',(0.,0.,1.)); +#484961 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#484962 = ORIENTED_EDGE('',*,*,#484963,.T.); +#484963 = EDGE_CURVE('',#484955,#484936,#484964,.T.); +#484964 = LINE('',#484965,#484966); +#484965 = CARTESIAN_POINT('',(141.32,-153.42,1.56)); +#484966 = VECTOR('',#484967,1.); +#484967 = DIRECTION('',(0.,-1.,0.)); +#484968 = FACE_BOUND('',#484969,.F.); +#484969 = EDGE_LOOP('',(#484970)); +#484970 = ORIENTED_EDGE('',*,*,#484971,.T.); +#484971 = EDGE_CURVE('',#484972,#484972,#484974,.T.); +#484972 = VERTEX_POINT('',#484973); +#484973 = CARTESIAN_POINT('',(134.935,-154.5,1.56)); +#484974 = CIRCLE('',#484975,0.325); +#484975 = AXIS2_PLACEMENT_3D('',#484976,#484977,#484978); +#484976 = CARTESIAN_POINT('',(134.61,-154.5,1.56)); +#484977 = DIRECTION('',(0.,0.,1.)); +#484978 = DIRECTION('',(1.,0.,-0.)); +#484979 = FACE_BOUND('',#484980,.F.); +#484980 = EDGE_LOOP('',(#484981)); +#484981 = ORIENTED_EDGE('',*,*,#484982,.T.); +#484982 = EDGE_CURVE('',#484983,#484983,#484985,.T.); +#484983 = VERTEX_POINT('',#484984); +#484984 = CARTESIAN_POINT('',(140.715,-154.5,1.56)); +#484985 = CIRCLE('',#484986,0.325); +#484986 = AXIS2_PLACEMENT_3D('',#484987,#484988,#484989); +#484987 = CARTESIAN_POINT('',(140.39,-154.5,1.56)); +#484988 = DIRECTION('',(0.,0.,1.)); +#484989 = DIRECTION('',(1.,0.,-0.)); +#484990 = FACE_BOUND('',#484991,.F.); +#484991 = EDGE_LOOP('',(#484992,#485003,#485011,#485020,#485028,#485037, + #485045,#485054)); +#484992 = ORIENTED_EDGE('',*,*,#484993,.T.); +#484993 = EDGE_CURVE('',#484994,#484996,#484998,.T.); +#484994 = VERTEX_POINT('',#484995); +#484995 = CARTESIAN_POINT('',(126.81,-154.34,1.56)); +#484996 = VERTEX_POINT('',#484997); +#484997 = CARTESIAN_POINT('',(126.67,-154.2,1.56)); +#484998 = CIRCLE('',#484999,0.139999827125); +#484999 = AXIS2_PLACEMENT_3D('',#485000,#485001,#485002); +#485000 = CARTESIAN_POINT('',(126.67000017287,-154.3399998271,1.56)); +#485001 = DIRECTION('',(0.,0.,1.)); +#485002 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#485003 = ORIENTED_EDGE('',*,*,#485004,.T.); +#485004 = EDGE_CURVE('',#484996,#485005,#485007,.T.); +#485005 = VERTEX_POINT('',#485006); +#485006 = CARTESIAN_POINT('',(126.33,-154.2,1.56)); +#485007 = LINE('',#485008,#485009); +#485008 = CARTESIAN_POINT('',(126.67,-154.2,1.56)); +#485009 = VECTOR('',#485010,1.); +#485010 = DIRECTION('',(-1.,0.,0.)); +#485011 = ORIENTED_EDGE('',*,*,#485012,.T.); +#485012 = EDGE_CURVE('',#485005,#485013,#485015,.T.); +#485013 = VERTEX_POINT('',#485014); +#485014 = CARTESIAN_POINT('',(126.19,-154.34,1.56)); +#485015 = CIRCLE('',#485016,0.139999827125); +#485016 = AXIS2_PLACEMENT_3D('',#485017,#485018,#485019); +#485017 = CARTESIAN_POINT('',(126.32999982712,-154.3399998271,1.56)); +#485018 = DIRECTION('',(0.,0.,1.)); +#485019 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#485020 = ORIENTED_EDGE('',*,*,#485021,.T.); +#485021 = EDGE_CURVE('',#485013,#485022,#485024,.T.); +#485022 = VERTEX_POINT('',#485023); +#485023 = CARTESIAN_POINT('',(126.19,-154.62,1.56)); +#485024 = LINE('',#485025,#485026); +#485025 = CARTESIAN_POINT('',(126.19,-154.34,1.56)); +#485026 = VECTOR('',#485027,1.); +#485027 = DIRECTION('',(0.,-1.,0.)); +#485028 = ORIENTED_EDGE('',*,*,#485029,.T.); +#485029 = EDGE_CURVE('',#485022,#485030,#485032,.T.); +#485030 = VERTEX_POINT('',#485031); +#485031 = CARTESIAN_POINT('',(126.33,-154.76,1.56)); +#485032 = CIRCLE('',#485033,0.139999827125); +#485033 = AXIS2_PLACEMENT_3D('',#485034,#485035,#485036); +#485034 = CARTESIAN_POINT('',(126.32999982712,-154.6200001728,1.56)); +#485035 = DIRECTION('',(0.,0.,1.)); +#485036 = DIRECTION('',(-0.999999999999,1.234820451254E-06,0.)); +#485037 = ORIENTED_EDGE('',*,*,#485038,.T.); +#485038 = EDGE_CURVE('',#485030,#485039,#485041,.T.); +#485039 = VERTEX_POINT('',#485040); +#485040 = CARTESIAN_POINT('',(126.67,-154.76,1.56)); +#485041 = LINE('',#485042,#485043); +#485042 = CARTESIAN_POINT('',(126.33,-154.76,1.56)); +#485043 = VECTOR('',#485044,1.); +#485044 = DIRECTION('',(1.,0.,0.)); +#485045 = ORIENTED_EDGE('',*,*,#485046,.T.); +#485046 = EDGE_CURVE('',#485039,#485047,#485049,.T.); +#485047 = VERTEX_POINT('',#485048); +#485048 = CARTESIAN_POINT('',(126.81,-154.62,1.56)); +#485049 = CIRCLE('',#485050,0.139999827125); +#485050 = AXIS2_PLACEMENT_3D('',#485051,#485052,#485053); +#485051 = CARTESIAN_POINT('',(126.67000017287,-154.6200001728,1.56)); +#485052 = DIRECTION('',(0.,0.,1.)); +#485053 = DIRECTION('',(-1.23482055276E-06,-0.999999999999,0.)); +#485054 = ORIENTED_EDGE('',*,*,#485055,.T.); +#485055 = EDGE_CURVE('',#485047,#484994,#485056,.T.); +#485056 = LINE('',#485057,#485058); +#485057 = CARTESIAN_POINT('',(126.81,-154.62,1.56)); +#485058 = VECTOR('',#485059,1.); +#485059 = DIRECTION('',(0.,1.,0.)); +#485060 = FACE_BOUND('',#485061,.F.); +#485061 = EDGE_LOOP('',(#485062,#485073,#485081,#485090,#485098,#485107, + #485115,#485124)); +#485062 = ORIENTED_EDGE('',*,*,#485063,.T.); +#485063 = EDGE_CURVE('',#485064,#485066,#485068,.T.); +#485064 = VERTEX_POINT('',#485065); +#485065 = CARTESIAN_POINT('',(128.07,-154.135,1.56)); +#485066 = VERTEX_POINT('',#485067); +#485067 = CARTESIAN_POINT('',(127.935,-154.,1.56)); +#485068 = CIRCLE('',#485069,0.135001418495); +#485069 = AXIS2_PLACEMENT_3D('',#485070,#485071,#485072); +#485070 = CARTESIAN_POINT('',(127.93499858151,-154.1350014184,1.56)); +#485071 = DIRECTION('',(0.,0.,1.)); +#485072 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#485073 = ORIENTED_EDGE('',*,*,#485074,.T.); +#485074 = EDGE_CURVE('',#485066,#485075,#485077,.T.); +#485075 = VERTEX_POINT('',#485076); +#485076 = CARTESIAN_POINT('',(127.565,-154.,1.56)); +#485077 = LINE('',#485078,#485079); +#485078 = CARTESIAN_POINT('',(127.935,-154.,1.56)); +#485079 = VECTOR('',#485080,1.); +#485080 = DIRECTION('',(-1.,0.,0.)); +#485081 = ORIENTED_EDGE('',*,*,#485082,.T.); +#485082 = EDGE_CURVE('',#485075,#485083,#485085,.T.); +#485083 = VERTEX_POINT('',#485084); +#485084 = CARTESIAN_POINT('',(127.43,-154.135,1.56)); +#485085 = CIRCLE('',#485086,0.135001418495); +#485086 = AXIS2_PLACEMENT_3D('',#485087,#485088,#485089); +#485087 = CARTESIAN_POINT('',(127.56500141848,-154.1350014184,1.56)); +#485088 = DIRECTION('',(0.,0.,1.)); +#485089 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#485090 = ORIENTED_EDGE('',*,*,#485091,.T.); +#485091 = EDGE_CURVE('',#485083,#485092,#485094,.T.); +#485092 = VERTEX_POINT('',#485093); +#485093 = CARTESIAN_POINT('',(127.43,-154.405,1.56)); +#485094 = LINE('',#485095,#485096); +#485095 = CARTESIAN_POINT('',(127.43,-154.135,1.56)); +#485096 = VECTOR('',#485097,1.); +#485097 = DIRECTION('',(0.,-1.,0.)); +#485098 = ORIENTED_EDGE('',*,*,#485099,.T.); +#485099 = EDGE_CURVE('',#485092,#485100,#485102,.T.); +#485100 = VERTEX_POINT('',#485101); +#485101 = CARTESIAN_POINT('',(127.565,-154.54,1.56)); +#485102 = CIRCLE('',#485103,0.135001418495); +#485103 = AXIS2_PLACEMENT_3D('',#485104,#485105,#485106); +#485104 = CARTESIAN_POINT('',(127.56500141848,-154.4049985815,1.56)); +#485105 = DIRECTION('',(0.,0.,1.)); +#485106 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#485107 = ORIENTED_EDGE('',*,*,#485108,.T.); +#485108 = EDGE_CURVE('',#485100,#485109,#485111,.T.); +#485109 = VERTEX_POINT('',#485110); +#485110 = CARTESIAN_POINT('',(127.935,-154.54,1.56)); +#485111 = LINE('',#485112,#485113); +#485112 = CARTESIAN_POINT('',(127.565,-154.54,1.56)); +#485113 = VECTOR('',#485114,1.); +#485114 = DIRECTION('',(1.,0.,0.)); +#485115 = ORIENTED_EDGE('',*,*,#485116,.T.); +#485116 = EDGE_CURVE('',#485109,#485117,#485119,.T.); +#485117 = VERTEX_POINT('',#485118); +#485118 = CARTESIAN_POINT('',(128.07,-154.405,1.56)); +#485119 = CIRCLE('',#485120,0.135001418495); +#485120 = AXIS2_PLACEMENT_3D('',#485121,#485122,#485123); +#485121 = CARTESIAN_POINT('',(127.93499858151,-154.4049985815,1.56)); +#485122 = DIRECTION('',(0.,0.,1.)); +#485123 = DIRECTION('',(1.05072062005E-05,-0.999999999945,0.)); +#485124 = ORIENTED_EDGE('',*,*,#485125,.T.); +#485125 = EDGE_CURVE('',#485117,#485064,#485126,.T.); +#485126 = LINE('',#485127,#485128); +#485127 = CARTESIAN_POINT('',(128.07,-154.405,1.56)); +#485128 = VECTOR('',#485129,1.); +#485129 = DIRECTION('',(0.,1.,0.)); +#485130 = FACE_BOUND('',#485131,.F.); +#485131 = EDGE_LOOP('',(#485132,#485143,#485151,#485160,#485168,#485177, + #485185,#485194)); +#485132 = ORIENTED_EDGE('',*,*,#485133,.T.); +#485133 = EDGE_CURVE('',#485134,#485136,#485138,.T.); +#485134 = VERTEX_POINT('',#485135); +#485135 = CARTESIAN_POINT('',(129.32,-154.135,1.56)); +#485136 = VERTEX_POINT('',#485137); +#485137 = CARTESIAN_POINT('',(129.185,-154.,1.56)); +#485138 = CIRCLE('',#485139,0.135001418495); +#485139 = AXIS2_PLACEMENT_3D('',#485140,#485141,#485142); +#485140 = CARTESIAN_POINT('',(129.18499858151,-154.1350014184,1.56)); +#485141 = DIRECTION('',(0.,0.,1.)); +#485142 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#485143 = ORIENTED_EDGE('',*,*,#485144,.T.); +#485144 = EDGE_CURVE('',#485136,#485145,#485147,.T.); +#485145 = VERTEX_POINT('',#485146); +#485146 = CARTESIAN_POINT('',(128.815,-154.,1.56)); +#485147 = LINE('',#485148,#485149); +#485148 = CARTESIAN_POINT('',(129.185,-154.,1.56)); +#485149 = VECTOR('',#485150,1.); +#485150 = DIRECTION('',(-1.,0.,0.)); +#485151 = ORIENTED_EDGE('',*,*,#485152,.T.); +#485152 = EDGE_CURVE('',#485145,#485153,#485155,.T.); +#485153 = VERTEX_POINT('',#485154); +#485154 = CARTESIAN_POINT('',(128.68,-154.135,1.56)); +#485155 = CIRCLE('',#485156,0.135001418495); +#485156 = AXIS2_PLACEMENT_3D('',#485157,#485158,#485159); +#485157 = CARTESIAN_POINT('',(128.81500141848,-154.1350014184,1.56)); +#485158 = DIRECTION('',(0.,0.,1.)); +#485159 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#485160 = ORIENTED_EDGE('',*,*,#485161,.T.); +#485161 = EDGE_CURVE('',#485153,#485162,#485164,.T.); +#485162 = VERTEX_POINT('',#485163); +#485163 = CARTESIAN_POINT('',(128.68,-154.405,1.56)); +#485164 = LINE('',#485165,#485166); +#485165 = CARTESIAN_POINT('',(128.68,-154.135,1.56)); +#485166 = VECTOR('',#485167,1.); +#485167 = DIRECTION('',(0.,-1.,0.)); +#485168 = ORIENTED_EDGE('',*,*,#485169,.T.); +#485169 = EDGE_CURVE('',#485162,#485170,#485172,.T.); +#485170 = VERTEX_POINT('',#485171); +#485171 = CARTESIAN_POINT('',(128.815,-154.54,1.56)); +#485172 = CIRCLE('',#485173,0.135001418495); +#485173 = AXIS2_PLACEMENT_3D('',#485174,#485175,#485176); +#485174 = CARTESIAN_POINT('',(128.81500141848,-154.4049985815,1.56)); +#485175 = DIRECTION('',(0.,0.,1.)); +#485176 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#485177 = ORIENTED_EDGE('',*,*,#485178,.T.); +#485178 = EDGE_CURVE('',#485170,#485179,#485181,.T.); +#485179 = VERTEX_POINT('',#485180); +#485180 = CARTESIAN_POINT('',(129.185,-154.54,1.56)); +#485181 = LINE('',#485182,#485183); +#485182 = CARTESIAN_POINT('',(128.815,-154.54,1.56)); +#485183 = VECTOR('',#485184,1.); +#485184 = DIRECTION('',(1.,0.,0.)); +#485185 = ORIENTED_EDGE('',*,*,#485186,.T.); +#485186 = EDGE_CURVE('',#485179,#485187,#485189,.T.); +#485187 = VERTEX_POINT('',#485188); +#485188 = CARTESIAN_POINT('',(129.32,-154.405,1.56)); +#485189 = CIRCLE('',#485190,0.135001418495); +#485190 = AXIS2_PLACEMENT_3D('',#485191,#485192,#485193); +#485191 = CARTESIAN_POINT('',(129.18499858151,-154.4049985815,1.56)); +#485192 = DIRECTION('',(0.,0.,1.)); +#485193 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#485194 = ORIENTED_EDGE('',*,*,#485195,.T.); +#485195 = EDGE_CURVE('',#485187,#485134,#485196,.T.); +#485196 = LINE('',#485197,#485198); +#485197 = CARTESIAN_POINT('',(129.32,-154.405,1.56)); +#485198 = VECTOR('',#485199,1.); +#485199 = DIRECTION('',(0.,1.,0.)); +#485200 = FACE_BOUND('',#485201,.F.); +#485201 = EDGE_LOOP('',(#485202,#485213,#485221,#485230,#485238,#485247, + #485255,#485264)); +#485202 = ORIENTED_EDGE('',*,*,#485203,.T.); +#485203 = EDGE_CURVE('',#485204,#485206,#485208,.T.); +#485204 = VERTEX_POINT('',#485205); +#485205 = CARTESIAN_POINT('',(130.57,-154.135,1.56)); +#485206 = VERTEX_POINT('',#485207); +#485207 = CARTESIAN_POINT('',(130.435,-154.,1.56)); +#485208 = CIRCLE('',#485209,0.135001418495); +#485209 = AXIS2_PLACEMENT_3D('',#485210,#485211,#485212); +#485210 = CARTESIAN_POINT('',(130.43499858151,-154.1350014184,1.56)); +#485211 = DIRECTION('',(0.,0.,1.)); +#485212 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#485213 = ORIENTED_EDGE('',*,*,#485214,.T.); +#485214 = EDGE_CURVE('',#485206,#485215,#485217,.T.); +#485215 = VERTEX_POINT('',#485216); +#485216 = CARTESIAN_POINT('',(130.065,-154.,1.56)); +#485217 = LINE('',#485218,#485219); +#485218 = CARTESIAN_POINT('',(130.435,-154.,1.56)); +#485219 = VECTOR('',#485220,1.); +#485220 = DIRECTION('',(-1.,0.,0.)); +#485221 = ORIENTED_EDGE('',*,*,#485222,.T.); +#485222 = EDGE_CURVE('',#485215,#485223,#485225,.T.); +#485223 = VERTEX_POINT('',#485224); +#485224 = CARTESIAN_POINT('',(129.93,-154.135,1.56)); +#485225 = CIRCLE('',#485226,0.135001418495); +#485226 = AXIS2_PLACEMENT_3D('',#485227,#485228,#485229); +#485227 = CARTESIAN_POINT('',(130.06500141848,-154.1350014184,1.56)); +#485228 = DIRECTION('',(0.,0.,1.)); +#485229 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#485230 = ORIENTED_EDGE('',*,*,#485231,.T.); +#485231 = EDGE_CURVE('',#485223,#485232,#485234,.T.); +#485232 = VERTEX_POINT('',#485233); +#485233 = CARTESIAN_POINT('',(129.93,-154.405,1.56)); +#485234 = LINE('',#485235,#485236); +#485235 = CARTESIAN_POINT('',(129.93,-154.135,1.56)); +#485236 = VECTOR('',#485237,1.); +#485237 = DIRECTION('',(0.,-1.,0.)); +#485238 = ORIENTED_EDGE('',*,*,#485239,.T.); +#485239 = EDGE_CURVE('',#485232,#485240,#485242,.T.); +#485240 = VERTEX_POINT('',#485241); +#485241 = CARTESIAN_POINT('',(130.065,-154.54,1.56)); +#485242 = CIRCLE('',#485243,0.135001418495); +#485243 = AXIS2_PLACEMENT_3D('',#485244,#485245,#485246); +#485244 = CARTESIAN_POINT('',(130.06500141848,-154.4049985815,1.56)); +#485245 = DIRECTION('',(0.,0.,1.)); +#485246 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#485247 = ORIENTED_EDGE('',*,*,#485248,.T.); +#485248 = EDGE_CURVE('',#485240,#485249,#485251,.T.); +#485249 = VERTEX_POINT('',#485250); +#485250 = CARTESIAN_POINT('',(130.435,-154.54,1.56)); +#485251 = LINE('',#485252,#485253); +#485252 = CARTESIAN_POINT('',(130.065,-154.54,1.56)); +#485253 = VECTOR('',#485254,1.); +#485254 = DIRECTION('',(1.,0.,0.)); +#485255 = ORIENTED_EDGE('',*,*,#485256,.T.); +#485256 = EDGE_CURVE('',#485249,#485257,#485259,.T.); +#485257 = VERTEX_POINT('',#485258); +#485258 = CARTESIAN_POINT('',(130.57,-154.405,1.56)); +#485259 = CIRCLE('',#485260,0.135001418495); +#485260 = AXIS2_PLACEMENT_3D('',#485261,#485262,#485263); +#485261 = CARTESIAN_POINT('',(130.43499858151,-154.4049985815,1.56)); +#485262 = DIRECTION('',(0.,0.,1.)); +#485263 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#485264 = ORIENTED_EDGE('',*,*,#485265,.T.); +#485265 = EDGE_CURVE('',#485257,#485204,#485266,.T.); +#485266 = LINE('',#485267,#485268); +#485267 = CARTESIAN_POINT('',(130.57,-154.405,1.56)); +#485268 = VECTOR('',#485269,1.); +#485269 = DIRECTION('',(0.,1.,0.)); +#485270 = FACE_BOUND('',#485271,.F.); +#485271 = EDGE_LOOP('',(#485272,#485283,#485291,#485300,#485308,#485317, + #485325,#485334)); +#485272 = ORIENTED_EDGE('',*,*,#485273,.T.); +#485273 = EDGE_CURVE('',#485274,#485276,#485278,.T.); +#485274 = VERTEX_POINT('',#485275); +#485275 = CARTESIAN_POINT('',(126.81,-153.38,1.56)); +#485276 = VERTEX_POINT('',#485277); +#485277 = CARTESIAN_POINT('',(126.67,-153.24,1.56)); +#485278 = CIRCLE('',#485279,0.139999827125); +#485279 = AXIS2_PLACEMENT_3D('',#485280,#485281,#485282); +#485280 = CARTESIAN_POINT('',(126.67000017287,-153.3799998271,1.56)); +#485281 = DIRECTION('',(0.,0.,1.)); +#485282 = DIRECTION('',(0.999999999999,-1.234820451254E-06,0.)); +#485283 = ORIENTED_EDGE('',*,*,#485284,.T.); +#485284 = EDGE_CURVE('',#485276,#485285,#485287,.T.); +#485285 = VERTEX_POINT('',#485286); +#485286 = CARTESIAN_POINT('',(126.33,-153.24,1.56)); +#485287 = LINE('',#485288,#485289); +#485288 = CARTESIAN_POINT('',(126.67,-153.24,1.56)); +#485289 = VECTOR('',#485290,1.); +#485290 = DIRECTION('',(-1.,0.,0.)); +#485291 = ORIENTED_EDGE('',*,*,#485292,.T.); +#485292 = EDGE_CURVE('',#485285,#485293,#485295,.T.); +#485293 = VERTEX_POINT('',#485294); +#485294 = CARTESIAN_POINT('',(126.19,-153.38,1.56)); +#485295 = CIRCLE('',#485296,0.139999827125); +#485296 = AXIS2_PLACEMENT_3D('',#485297,#485298,#485299); +#485297 = CARTESIAN_POINT('',(126.32999982712,-153.3799998271,1.56)); +#485298 = DIRECTION('',(0.,0.,1.)); +#485299 = DIRECTION('',(1.23482055276E-06,0.999999999999,-0.)); +#485300 = ORIENTED_EDGE('',*,*,#485301,.T.); +#485301 = EDGE_CURVE('',#485293,#485302,#485304,.T.); +#485302 = VERTEX_POINT('',#485303); +#485303 = CARTESIAN_POINT('',(126.19,-153.66,1.56)); +#485304 = LINE('',#485305,#485306); +#485305 = CARTESIAN_POINT('',(126.19,-153.38,1.56)); +#485306 = VECTOR('',#485307,1.); +#485307 = DIRECTION('',(0.,-1.,0.)); +#485308 = ORIENTED_EDGE('',*,*,#485309,.T.); +#485309 = EDGE_CURVE('',#485302,#485310,#485312,.T.); +#485310 = VERTEX_POINT('',#485311); +#485311 = CARTESIAN_POINT('',(126.33,-153.8,1.56)); +#485312 = CIRCLE('',#485313,0.139999827125); +#485313 = AXIS2_PLACEMENT_3D('',#485314,#485315,#485316); +#485314 = CARTESIAN_POINT('',(126.32999982712,-153.6600001728,1.56)); +#485315 = DIRECTION('',(0.,0.,1.)); +#485316 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#485317 = ORIENTED_EDGE('',*,*,#485318,.T.); +#485318 = EDGE_CURVE('',#485310,#485319,#485321,.T.); +#485319 = VERTEX_POINT('',#485320); +#485320 = CARTESIAN_POINT('',(126.67,-153.8,1.56)); +#485321 = LINE('',#485322,#485323); +#485322 = CARTESIAN_POINT('',(126.33,-153.8,1.56)); +#485323 = VECTOR('',#485324,1.); +#485324 = DIRECTION('',(1.,0.,0.)); +#485325 = ORIENTED_EDGE('',*,*,#485326,.T.); +#485326 = EDGE_CURVE('',#485319,#485327,#485329,.T.); +#485327 = VERTEX_POINT('',#485328); +#485328 = CARTESIAN_POINT('',(126.81,-153.66,1.56)); +#485329 = CIRCLE('',#485330,0.139999827125); +#485330 = AXIS2_PLACEMENT_3D('',#485331,#485332,#485333); +#485331 = CARTESIAN_POINT('',(126.67000017287,-153.6600001728,1.56)); +#485332 = DIRECTION('',(0.,0.,1.)); +#485333 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#485334 = ORIENTED_EDGE('',*,*,#485335,.T.); +#485335 = EDGE_CURVE('',#485327,#485274,#485336,.T.); +#485336 = LINE('',#485337,#485338); +#485337 = CARTESIAN_POINT('',(126.81,-153.66,1.56)); +#485338 = VECTOR('',#485339,1.); +#485339 = DIRECTION('',(0.,1.,0.)); +#485340 = FACE_BOUND('',#485341,.F.); +#485341 = EDGE_LOOP('',(#485342,#485353,#485361,#485370,#485378,#485387, + #485395,#485404)); +#485342 = ORIENTED_EDGE('',*,*,#485343,.T.); +#485343 = EDGE_CURVE('',#485344,#485346,#485348,.T.); +#485344 = VERTEX_POINT('',#485345); +#485345 = CARTESIAN_POINT('',(134.55,-152.48,1.56)); +#485346 = VERTEX_POINT('',#485347); +#485347 = CARTESIAN_POINT('',(134.4,-152.33,1.56)); +#485348 = CIRCLE('',#485349,0.150000058649); +#485349 = AXIS2_PLACEMENT_3D('',#485350,#485351,#485352); +#485350 = CARTESIAN_POINT('',(134.39999994135,-152.4800000586,1.56)); +#485351 = DIRECTION('',(0.,0.,1.)); +#485352 = DIRECTION('',(1.,3.90995219498E-07,-0.)); +#485353 = ORIENTED_EDGE('',*,*,#485354,.T.); +#485354 = EDGE_CURVE('',#485346,#485355,#485357,.T.); +#485355 = VERTEX_POINT('',#485356); +#485356 = CARTESIAN_POINT('',(134.1,-152.33,1.56)); +#485357 = LINE('',#485358,#485359); +#485358 = CARTESIAN_POINT('',(134.4,-152.33,1.56)); +#485359 = VECTOR('',#485360,1.); +#485360 = DIRECTION('',(-1.,0.,0.)); +#485361 = ORIENTED_EDGE('',*,*,#485362,.T.); +#485362 = EDGE_CURVE('',#485355,#485363,#485365,.T.); +#485363 = VERTEX_POINT('',#485364); +#485364 = CARTESIAN_POINT('',(133.95,-152.48,1.56)); +#485365 = CIRCLE('',#485366,0.150000058649); +#485366 = AXIS2_PLACEMENT_3D('',#485367,#485368,#485369); +#485367 = CARTESIAN_POINT('',(134.10000005864,-152.4800000586,1.56)); +#485368 = DIRECTION('',(0.,0.,1.)); +#485369 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#485370 = ORIENTED_EDGE('',*,*,#485371,.T.); +#485371 = EDGE_CURVE('',#485363,#485372,#485374,.T.); +#485372 = VERTEX_POINT('',#485373); +#485373 = CARTESIAN_POINT('',(133.95,-153.63,1.56)); +#485374 = LINE('',#485375,#485376); +#485375 = CARTESIAN_POINT('',(133.95,-152.48,1.56)); +#485376 = VECTOR('',#485377,1.); +#485377 = DIRECTION('',(0.,-1.,0.)); +#485378 = ORIENTED_EDGE('',*,*,#485379,.T.); +#485379 = EDGE_CURVE('',#485372,#485380,#485382,.T.); +#485380 = VERTEX_POINT('',#485381); +#485381 = CARTESIAN_POINT('',(134.1,-153.78,1.56)); +#485382 = CIRCLE('',#485383,0.150000058649); +#485383 = AXIS2_PLACEMENT_3D('',#485384,#485385,#485386); +#485384 = CARTESIAN_POINT('',(134.10000005864,-153.6299999413,1.56)); +#485385 = DIRECTION('',(0.,0.,1.)); +#485386 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#485387 = ORIENTED_EDGE('',*,*,#485388,.T.); +#485388 = EDGE_CURVE('',#485380,#485389,#485391,.T.); +#485389 = VERTEX_POINT('',#485390); +#485390 = CARTESIAN_POINT('',(134.4,-153.78,1.56)); +#485391 = LINE('',#485392,#485393); +#485392 = CARTESIAN_POINT('',(134.1,-153.78,1.56)); +#485393 = VECTOR('',#485394,1.); +#485394 = DIRECTION('',(1.,0.,0.)); +#485395 = ORIENTED_EDGE('',*,*,#485396,.T.); +#485396 = EDGE_CURVE('',#485389,#485397,#485399,.T.); +#485397 = VERTEX_POINT('',#485398); +#485398 = CARTESIAN_POINT('',(134.55,-153.63,1.56)); +#485399 = CIRCLE('',#485400,0.150000058649); +#485400 = AXIS2_PLACEMENT_3D('',#485401,#485402,#485403); +#485401 = CARTESIAN_POINT('',(134.39999994135,-153.6299999413,1.56)); +#485402 = DIRECTION('',(0.,0.,1.)); +#485403 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#485404 = ORIENTED_EDGE('',*,*,#485405,.T.); +#485405 = EDGE_CURVE('',#485397,#485344,#485406,.T.); +#485406 = LINE('',#485407,#485408); +#485407 = CARTESIAN_POINT('',(134.55,-153.63,1.56)); +#485408 = VECTOR('',#485409,1.); +#485409 = DIRECTION('',(0.,1.,0.)); +#485410 = FACE_BOUND('',#485411,.F.); +#485411 = EDGE_LOOP('',(#485412,#485423,#485431,#485440,#485448,#485457, + #485465,#485474)); +#485412 = ORIENTED_EDGE('',*,*,#485413,.T.); +#485413 = EDGE_CURVE('',#485414,#485416,#485418,.T.); +#485414 = VERTEX_POINT('',#485415); +#485415 = CARTESIAN_POINT('',(135.35,-152.48,1.56)); +#485416 = VERTEX_POINT('',#485417); +#485417 = CARTESIAN_POINT('',(135.2,-152.33,1.56)); +#485418 = CIRCLE('',#485419,0.150000058649); +#485419 = AXIS2_PLACEMENT_3D('',#485420,#485421,#485422); +#485420 = CARTESIAN_POINT('',(135.19999994135,-152.4800000586,1.56)); +#485421 = DIRECTION('',(0.,0.,1.)); +#485422 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#485423 = ORIENTED_EDGE('',*,*,#485424,.T.); +#485424 = EDGE_CURVE('',#485416,#485425,#485427,.T.); +#485425 = VERTEX_POINT('',#485426); +#485426 = CARTESIAN_POINT('',(134.9,-152.33,1.56)); +#485427 = LINE('',#485428,#485429); +#485428 = CARTESIAN_POINT('',(135.2,-152.33,1.56)); +#485429 = VECTOR('',#485430,1.); +#485430 = DIRECTION('',(-1.,0.,0.)); +#485431 = ORIENTED_EDGE('',*,*,#485432,.T.); +#485432 = EDGE_CURVE('',#485425,#485433,#485435,.T.); +#485433 = VERTEX_POINT('',#485434); +#485434 = CARTESIAN_POINT('',(134.75,-152.48,1.56)); +#485435 = CIRCLE('',#485436,0.150000058649); +#485436 = AXIS2_PLACEMENT_3D('',#485437,#485438,#485439); +#485437 = CARTESIAN_POINT('',(134.90000005864,-152.4800000586,1.56)); +#485438 = DIRECTION('',(0.,0.,1.)); +#485439 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#485440 = ORIENTED_EDGE('',*,*,#485441,.T.); +#485441 = EDGE_CURVE('',#485433,#485442,#485444,.T.); +#485442 = VERTEX_POINT('',#485443); +#485443 = CARTESIAN_POINT('',(134.75,-153.63,1.56)); +#485444 = LINE('',#485445,#485446); +#485445 = CARTESIAN_POINT('',(134.75,-152.48,1.56)); +#485446 = VECTOR('',#485447,1.); +#485447 = DIRECTION('',(0.,-1.,0.)); +#485448 = ORIENTED_EDGE('',*,*,#485449,.T.); +#485449 = EDGE_CURVE('',#485442,#485450,#485452,.T.); +#485450 = VERTEX_POINT('',#485451); +#485451 = CARTESIAN_POINT('',(134.9,-153.78,1.56)); +#485452 = CIRCLE('',#485453,0.150000058649); +#485453 = AXIS2_PLACEMENT_3D('',#485454,#485455,#485456); +#485454 = CARTESIAN_POINT('',(134.90000005864,-153.6299999413,1.56)); +#485455 = DIRECTION('',(0.,0.,1.)); +#485456 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#485457 = ORIENTED_EDGE('',*,*,#485458,.T.); +#485458 = EDGE_CURVE('',#485450,#485459,#485461,.T.); +#485459 = VERTEX_POINT('',#485460); +#485460 = CARTESIAN_POINT('',(135.2,-153.78,1.56)); +#485461 = LINE('',#485462,#485463); +#485462 = CARTESIAN_POINT('',(134.9,-153.78,1.56)); +#485463 = VECTOR('',#485464,1.); +#485464 = DIRECTION('',(1.,0.,0.)); +#485465 = ORIENTED_EDGE('',*,*,#485466,.T.); +#485466 = EDGE_CURVE('',#485459,#485467,#485469,.T.); +#485467 = VERTEX_POINT('',#485468); +#485468 = CARTESIAN_POINT('',(135.35,-153.63,1.56)); +#485469 = CIRCLE('',#485470,0.150000058649); +#485470 = AXIS2_PLACEMENT_3D('',#485471,#485472,#485473); +#485471 = CARTESIAN_POINT('',(135.19999994135,-153.6299999413,1.56)); +#485472 = DIRECTION('',(0.,0.,1.)); +#485473 = DIRECTION('',(3.909955984538E-07,-1.,0.)); +#485474 = ORIENTED_EDGE('',*,*,#485475,.T.); +#485475 = EDGE_CURVE('',#485467,#485414,#485476,.T.); +#485476 = LINE('',#485477,#485478); +#485477 = CARTESIAN_POINT('',(135.35,-153.63,1.56)); +#485478 = VECTOR('',#485479,1.); +#485479 = DIRECTION('',(0.,1.,0.)); +#485480 = FACE_BOUND('',#485481,.F.); +#485481 = EDGE_LOOP('',(#485482,#485493,#485501,#485510,#485518,#485527, + #485535,#485544)); +#485482 = ORIENTED_EDGE('',*,*,#485483,.T.); +#485483 = EDGE_CURVE('',#485484,#485486,#485488,.T.); +#485484 = VERTEX_POINT('',#485485); +#485485 = CARTESIAN_POINT('',(135.9,-152.405,1.56)); +#485486 = VERTEX_POINT('',#485487); +#485487 = CARTESIAN_POINT('',(135.825,-152.33,1.56)); +#485488 = CIRCLE('',#485489,7.500002932469E-02); +#485489 = AXIS2_PLACEMENT_3D('',#485490,#485491,#485492); +#485490 = CARTESIAN_POINT('',(135.82499997067,-152.4050000293,1.56)); +#485491 = DIRECTION('',(0.,0.,1.)); +#485492 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485493 = ORIENTED_EDGE('',*,*,#485494,.T.); +#485494 = EDGE_CURVE('',#485486,#485495,#485497,.T.); +#485495 = VERTEX_POINT('',#485496); +#485496 = CARTESIAN_POINT('',(135.675,-152.33,1.56)); +#485497 = LINE('',#485498,#485499); +#485498 = CARTESIAN_POINT('',(135.825,-152.33,1.56)); +#485499 = VECTOR('',#485500,1.); +#485500 = DIRECTION('',(-1.,0.,0.)); +#485501 = ORIENTED_EDGE('',*,*,#485502,.T.); +#485502 = EDGE_CURVE('',#485495,#485503,#485505,.T.); +#485503 = VERTEX_POINT('',#485504); +#485504 = CARTESIAN_POINT('',(135.6,-152.405,1.56)); +#485505 = CIRCLE('',#485506,7.500002932469E-02); +#485506 = AXIS2_PLACEMENT_3D('',#485507,#485508,#485509); +#485507 = CARTESIAN_POINT('',(135.67500002932,-152.4050000293,1.56)); +#485508 = DIRECTION('',(0.,0.,1.)); +#485509 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485510 = ORIENTED_EDGE('',*,*,#485511,.T.); +#485511 = EDGE_CURVE('',#485503,#485512,#485514,.T.); +#485512 = VERTEX_POINT('',#485513); +#485513 = CARTESIAN_POINT('',(135.6,-153.705,1.56)); +#485514 = LINE('',#485515,#485516); +#485515 = CARTESIAN_POINT('',(135.6,-152.405,1.56)); +#485516 = VECTOR('',#485517,1.); +#485517 = DIRECTION('',(0.,-1.,0.)); +#485518 = ORIENTED_EDGE('',*,*,#485519,.T.); +#485519 = EDGE_CURVE('',#485512,#485520,#485522,.T.); +#485520 = VERTEX_POINT('',#485521); +#485521 = CARTESIAN_POINT('',(135.675,-153.78,1.56)); +#485522 = CIRCLE('',#485523,7.500002932469E-02); +#485523 = AXIS2_PLACEMENT_3D('',#485524,#485525,#485526); +#485524 = CARTESIAN_POINT('',(135.67500002932,-153.7049999706,1.56)); +#485525 = DIRECTION('',(0.,0.,1.)); +#485526 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485527 = ORIENTED_EDGE('',*,*,#485528,.T.); +#485528 = EDGE_CURVE('',#485520,#485529,#485531,.T.); +#485529 = VERTEX_POINT('',#485530); +#485530 = CARTESIAN_POINT('',(135.825,-153.78,1.56)); +#485531 = LINE('',#485532,#485533); +#485532 = CARTESIAN_POINT('',(135.675,-153.78,1.56)); +#485533 = VECTOR('',#485534,1.); +#485534 = DIRECTION('',(1.,0.,0.)); +#485535 = ORIENTED_EDGE('',*,*,#485536,.T.); +#485536 = EDGE_CURVE('',#485529,#485537,#485539,.T.); +#485537 = VERTEX_POINT('',#485538); +#485538 = CARTESIAN_POINT('',(135.9,-153.705,1.56)); +#485539 = CIRCLE('',#485540,7.500002932469E-02); +#485540 = AXIS2_PLACEMENT_3D('',#485541,#485542,#485543); +#485541 = CARTESIAN_POINT('',(135.82499997067,-153.7049999706,1.56)); +#485542 = DIRECTION('',(0.,0.,1.)); +#485543 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485544 = ORIENTED_EDGE('',*,*,#485545,.T.); +#485545 = EDGE_CURVE('',#485537,#485484,#485546,.T.); +#485546 = LINE('',#485547,#485548); +#485547 = CARTESIAN_POINT('',(135.9,-153.705,1.56)); +#485548 = VECTOR('',#485549,1.); +#485549 = DIRECTION('',(0.,1.,0.)); +#485550 = FACE_BOUND('',#485551,.F.); +#485551 = EDGE_LOOP('',(#485552,#485563,#485571,#485580,#485588,#485597, + #485605,#485614)); +#485552 = ORIENTED_EDGE('',*,*,#485553,.T.); +#485553 = EDGE_CURVE('',#485554,#485556,#485558,.T.); +#485554 = VERTEX_POINT('',#485555); +#485555 = CARTESIAN_POINT('',(136.4,-152.405,1.56)); +#485556 = VERTEX_POINT('',#485557); +#485557 = CARTESIAN_POINT('',(136.325,-152.33,1.56)); +#485558 = CIRCLE('',#485559,7.500002932469E-02); +#485559 = AXIS2_PLACEMENT_3D('',#485560,#485561,#485562); +#485560 = CARTESIAN_POINT('',(136.32499997067,-152.4050000293,1.56)); +#485561 = DIRECTION('',(0.,0.,1.)); +#485562 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485563 = ORIENTED_EDGE('',*,*,#485564,.T.); +#485564 = EDGE_CURVE('',#485556,#485565,#485567,.T.); +#485565 = VERTEX_POINT('',#485566); +#485566 = CARTESIAN_POINT('',(136.175,-152.33,1.56)); +#485567 = LINE('',#485568,#485569); +#485568 = CARTESIAN_POINT('',(136.325,-152.33,1.56)); +#485569 = VECTOR('',#485570,1.); +#485570 = DIRECTION('',(-1.,0.,0.)); +#485571 = ORIENTED_EDGE('',*,*,#485572,.T.); +#485572 = EDGE_CURVE('',#485565,#485573,#485575,.T.); +#485573 = VERTEX_POINT('',#485574); +#485574 = CARTESIAN_POINT('',(136.1,-152.405,1.56)); +#485575 = CIRCLE('',#485576,7.500002932469E-02); +#485576 = AXIS2_PLACEMENT_3D('',#485577,#485578,#485579); +#485577 = CARTESIAN_POINT('',(136.17500002932,-152.4050000293,1.56)); +#485578 = DIRECTION('',(0.,0.,1.)); +#485579 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485580 = ORIENTED_EDGE('',*,*,#485581,.T.); +#485581 = EDGE_CURVE('',#485573,#485582,#485584,.T.); +#485582 = VERTEX_POINT('',#485583); +#485583 = CARTESIAN_POINT('',(136.1,-153.705,1.56)); +#485584 = LINE('',#485585,#485586); +#485585 = CARTESIAN_POINT('',(136.1,-152.405,1.56)); +#485586 = VECTOR('',#485587,1.); +#485587 = DIRECTION('',(0.,-1.,0.)); +#485588 = ORIENTED_EDGE('',*,*,#485589,.T.); +#485589 = EDGE_CURVE('',#485582,#485590,#485592,.T.); +#485590 = VERTEX_POINT('',#485591); +#485591 = CARTESIAN_POINT('',(136.175,-153.78,1.56)); +#485592 = CIRCLE('',#485593,7.500002932469E-02); +#485593 = AXIS2_PLACEMENT_3D('',#485594,#485595,#485596); +#485594 = CARTESIAN_POINT('',(136.17500002932,-153.7049999706,1.56)); +#485595 = DIRECTION('',(0.,0.,1.)); +#485596 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485597 = ORIENTED_EDGE('',*,*,#485598,.T.); +#485598 = EDGE_CURVE('',#485590,#485599,#485601,.T.); +#485599 = VERTEX_POINT('',#485600); +#485600 = CARTESIAN_POINT('',(136.325,-153.78,1.56)); +#485601 = LINE('',#485602,#485603); +#485602 = CARTESIAN_POINT('',(136.175,-153.78,1.56)); +#485603 = VECTOR('',#485604,1.); +#485604 = DIRECTION('',(1.,0.,0.)); +#485605 = ORIENTED_EDGE('',*,*,#485606,.T.); +#485606 = EDGE_CURVE('',#485599,#485607,#485609,.T.); +#485607 = VERTEX_POINT('',#485608); +#485608 = CARTESIAN_POINT('',(136.4,-153.705,1.56)); +#485609 = CIRCLE('',#485610,7.500002932469E-02); +#485610 = AXIS2_PLACEMENT_3D('',#485611,#485612,#485613); +#485611 = CARTESIAN_POINT('',(136.32499997067,-153.7049999706,1.56)); +#485612 = DIRECTION('',(0.,0.,1.)); +#485613 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485614 = ORIENTED_EDGE('',*,*,#485615,.T.); +#485615 = EDGE_CURVE('',#485607,#485554,#485616,.T.); +#485616 = LINE('',#485617,#485618); +#485617 = CARTESIAN_POINT('',(136.4,-153.705,1.56)); +#485618 = VECTOR('',#485619,1.); +#485619 = DIRECTION('',(0.,1.,0.)); +#485620 = FACE_BOUND('',#485621,.F.); +#485621 = EDGE_LOOP('',(#485622,#485633,#485641,#485650,#485658,#485667, + #485675,#485684)); +#485622 = ORIENTED_EDGE('',*,*,#485623,.T.); +#485623 = EDGE_CURVE('',#485624,#485626,#485628,.T.); +#485624 = VERTEX_POINT('',#485625); +#485625 = CARTESIAN_POINT('',(136.9,-152.405,1.56)); +#485626 = VERTEX_POINT('',#485627); +#485627 = CARTESIAN_POINT('',(136.825,-152.33,1.56)); +#485628 = CIRCLE('',#485629,7.500002932469E-02); +#485629 = AXIS2_PLACEMENT_3D('',#485630,#485631,#485632); +#485630 = CARTESIAN_POINT('',(136.82499997067,-152.4050000293,1.56)); +#485631 = DIRECTION('',(0.,0.,1.)); +#485632 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485633 = ORIENTED_EDGE('',*,*,#485634,.T.); +#485634 = EDGE_CURVE('',#485626,#485635,#485637,.T.); +#485635 = VERTEX_POINT('',#485636); +#485636 = CARTESIAN_POINT('',(136.675,-152.33,1.56)); +#485637 = LINE('',#485638,#485639); +#485638 = CARTESIAN_POINT('',(136.825,-152.33,1.56)); +#485639 = VECTOR('',#485640,1.); +#485640 = DIRECTION('',(-1.,0.,0.)); +#485641 = ORIENTED_EDGE('',*,*,#485642,.T.); +#485642 = EDGE_CURVE('',#485635,#485643,#485645,.T.); +#485643 = VERTEX_POINT('',#485644); +#485644 = CARTESIAN_POINT('',(136.6,-152.405,1.56)); +#485645 = CIRCLE('',#485646,7.500002932469E-02); +#485646 = AXIS2_PLACEMENT_3D('',#485647,#485648,#485649); +#485647 = CARTESIAN_POINT('',(136.67500002932,-152.4050000293,1.56)); +#485648 = DIRECTION('',(0.,0.,1.)); +#485649 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485650 = ORIENTED_EDGE('',*,*,#485651,.T.); +#485651 = EDGE_CURVE('',#485643,#485652,#485654,.T.); +#485652 = VERTEX_POINT('',#485653); +#485653 = CARTESIAN_POINT('',(136.6,-153.705,1.56)); +#485654 = LINE('',#485655,#485656); +#485655 = CARTESIAN_POINT('',(136.6,-152.405,1.56)); +#485656 = VECTOR('',#485657,1.); +#485657 = DIRECTION('',(0.,-1.,0.)); +#485658 = ORIENTED_EDGE('',*,*,#485659,.T.); +#485659 = EDGE_CURVE('',#485652,#485660,#485662,.T.); +#485660 = VERTEX_POINT('',#485661); +#485661 = CARTESIAN_POINT('',(136.675,-153.78,1.56)); +#485662 = CIRCLE('',#485663,7.500002932469E-02); +#485663 = AXIS2_PLACEMENT_3D('',#485664,#485665,#485666); +#485664 = CARTESIAN_POINT('',(136.67500002932,-153.7049999706,1.56)); +#485665 = DIRECTION('',(0.,0.,1.)); +#485666 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485667 = ORIENTED_EDGE('',*,*,#485668,.T.); +#485668 = EDGE_CURVE('',#485660,#485669,#485671,.T.); +#485669 = VERTEX_POINT('',#485670); +#485670 = CARTESIAN_POINT('',(136.825,-153.78,1.56)); +#485671 = LINE('',#485672,#485673); +#485672 = CARTESIAN_POINT('',(136.675,-153.78,1.56)); +#485673 = VECTOR('',#485674,1.); +#485674 = DIRECTION('',(1.,0.,0.)); +#485675 = ORIENTED_EDGE('',*,*,#485676,.T.); +#485676 = EDGE_CURVE('',#485669,#485677,#485679,.T.); +#485677 = VERTEX_POINT('',#485678); +#485678 = CARTESIAN_POINT('',(136.9,-153.705,1.56)); +#485679 = CIRCLE('',#485680,7.500002932469E-02); +#485680 = AXIS2_PLACEMENT_3D('',#485681,#485682,#485683); +#485681 = CARTESIAN_POINT('',(136.82499997067,-153.7049999706,1.56)); +#485682 = DIRECTION('',(0.,0.,1.)); +#485683 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485684 = ORIENTED_EDGE('',*,*,#485685,.T.); +#485685 = EDGE_CURVE('',#485677,#485624,#485686,.T.); +#485686 = LINE('',#485687,#485688); +#485687 = CARTESIAN_POINT('',(136.9,-153.705,1.56)); +#485688 = VECTOR('',#485689,1.); +#485689 = DIRECTION('',(0.,1.,0.)); +#485690 = FACE_BOUND('',#485691,.F.); +#485691 = EDGE_LOOP('',(#485692,#485703,#485711,#485720,#485728,#485737, + #485745,#485754)); +#485692 = ORIENTED_EDGE('',*,*,#485693,.T.); +#485693 = EDGE_CURVE('',#485694,#485696,#485698,.T.); +#485694 = VERTEX_POINT('',#485695); +#485695 = CARTESIAN_POINT('',(137.4,-152.405,1.56)); +#485696 = VERTEX_POINT('',#485697); +#485697 = CARTESIAN_POINT('',(137.325,-152.33,1.56)); +#485698 = CIRCLE('',#485699,7.500002932469E-02); +#485699 = AXIS2_PLACEMENT_3D('',#485700,#485701,#485702); +#485700 = CARTESIAN_POINT('',(137.32499997067,-152.4050000293,1.56)); +#485701 = DIRECTION('',(0.,0.,1.)); +#485702 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485703 = ORIENTED_EDGE('',*,*,#485704,.T.); +#485704 = EDGE_CURVE('',#485696,#485705,#485707,.T.); +#485705 = VERTEX_POINT('',#485706); +#485706 = CARTESIAN_POINT('',(137.175,-152.33,1.56)); +#485707 = LINE('',#485708,#485709); +#485708 = CARTESIAN_POINT('',(137.325,-152.33,1.56)); +#485709 = VECTOR('',#485710,1.); +#485710 = DIRECTION('',(-1.,0.,0.)); +#485711 = ORIENTED_EDGE('',*,*,#485712,.T.); +#485712 = EDGE_CURVE('',#485705,#485713,#485715,.T.); +#485713 = VERTEX_POINT('',#485714); +#485714 = CARTESIAN_POINT('',(137.1,-152.405,1.56)); +#485715 = CIRCLE('',#485716,7.500002932469E-02); +#485716 = AXIS2_PLACEMENT_3D('',#485717,#485718,#485719); +#485717 = CARTESIAN_POINT('',(137.17500002932,-152.4050000293,1.56)); +#485718 = DIRECTION('',(0.,0.,1.)); +#485719 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485720 = ORIENTED_EDGE('',*,*,#485721,.T.); +#485721 = EDGE_CURVE('',#485713,#485722,#485724,.T.); +#485722 = VERTEX_POINT('',#485723); +#485723 = CARTESIAN_POINT('',(137.1,-153.705,1.56)); +#485724 = LINE('',#485725,#485726); +#485725 = CARTESIAN_POINT('',(137.1,-152.405,1.56)); +#485726 = VECTOR('',#485727,1.); +#485727 = DIRECTION('',(0.,-1.,0.)); +#485728 = ORIENTED_EDGE('',*,*,#485729,.T.); +#485729 = EDGE_CURVE('',#485722,#485730,#485732,.T.); +#485730 = VERTEX_POINT('',#485731); +#485731 = CARTESIAN_POINT('',(137.175,-153.78,1.56)); +#485732 = CIRCLE('',#485733,7.500002932469E-02); +#485733 = AXIS2_PLACEMENT_3D('',#485734,#485735,#485736); +#485734 = CARTESIAN_POINT('',(137.17500002932,-153.7049999706,1.56)); +#485735 = DIRECTION('',(0.,0.,1.)); +#485736 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485737 = ORIENTED_EDGE('',*,*,#485738,.T.); +#485738 = EDGE_CURVE('',#485730,#485739,#485741,.T.); +#485739 = VERTEX_POINT('',#485740); +#485740 = CARTESIAN_POINT('',(137.325,-153.78,1.56)); +#485741 = LINE('',#485742,#485743); +#485742 = CARTESIAN_POINT('',(137.175,-153.78,1.56)); +#485743 = VECTOR('',#485744,1.); +#485744 = DIRECTION('',(1.,0.,0.)); +#485745 = ORIENTED_EDGE('',*,*,#485746,.T.); +#485746 = EDGE_CURVE('',#485739,#485747,#485749,.T.); +#485747 = VERTEX_POINT('',#485748); +#485748 = CARTESIAN_POINT('',(137.4,-153.705,1.56)); +#485749 = CIRCLE('',#485750,7.500002932469E-02); +#485750 = AXIS2_PLACEMENT_3D('',#485751,#485752,#485753); +#485751 = CARTESIAN_POINT('',(137.32499997067,-153.7049999706,1.56)); +#485752 = DIRECTION('',(0.,0.,1.)); +#485753 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485754 = ORIENTED_EDGE('',*,*,#485755,.T.); +#485755 = EDGE_CURVE('',#485747,#485694,#485756,.T.); +#485756 = LINE('',#485757,#485758); +#485757 = CARTESIAN_POINT('',(137.4,-153.705,1.56)); +#485758 = VECTOR('',#485759,1.); +#485759 = DIRECTION('',(0.,1.,0.)); +#485760 = FACE_BOUND('',#485761,.F.); +#485761 = EDGE_LOOP('',(#485762,#485773,#485781,#485790,#485798,#485807, + #485815,#485824)); +#485762 = ORIENTED_EDGE('',*,*,#485763,.T.); +#485763 = EDGE_CURVE('',#485764,#485766,#485768,.T.); +#485764 = VERTEX_POINT('',#485765); +#485765 = CARTESIAN_POINT('',(137.9,-152.405,1.56)); +#485766 = VERTEX_POINT('',#485767); +#485767 = CARTESIAN_POINT('',(137.825,-152.33,1.56)); +#485768 = CIRCLE('',#485769,7.500002932469E-02); +#485769 = AXIS2_PLACEMENT_3D('',#485770,#485771,#485772); +#485770 = CARTESIAN_POINT('',(137.82499997067,-152.4050000293,1.56)); +#485771 = DIRECTION('',(0.,0.,1.)); +#485772 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485773 = ORIENTED_EDGE('',*,*,#485774,.T.); +#485774 = EDGE_CURVE('',#485766,#485775,#485777,.T.); +#485775 = VERTEX_POINT('',#485776); +#485776 = CARTESIAN_POINT('',(137.675,-152.33,1.56)); +#485777 = LINE('',#485778,#485779); +#485778 = CARTESIAN_POINT('',(137.825,-152.33,1.56)); +#485779 = VECTOR('',#485780,1.); +#485780 = DIRECTION('',(-1.,0.,0.)); +#485781 = ORIENTED_EDGE('',*,*,#485782,.T.); +#485782 = EDGE_CURVE('',#485775,#485783,#485785,.T.); +#485783 = VERTEX_POINT('',#485784); +#485784 = CARTESIAN_POINT('',(137.6,-152.405,1.56)); +#485785 = CIRCLE('',#485786,7.500002932469E-02); +#485786 = AXIS2_PLACEMENT_3D('',#485787,#485788,#485789); +#485787 = CARTESIAN_POINT('',(137.67500002932,-152.4050000293,1.56)); +#485788 = DIRECTION('',(0.,0.,1.)); +#485789 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485790 = ORIENTED_EDGE('',*,*,#485791,.T.); +#485791 = EDGE_CURVE('',#485783,#485792,#485794,.T.); +#485792 = VERTEX_POINT('',#485793); +#485793 = CARTESIAN_POINT('',(137.6,-153.705,1.56)); +#485794 = LINE('',#485795,#485796); +#485795 = CARTESIAN_POINT('',(137.6,-152.405,1.56)); +#485796 = VECTOR('',#485797,1.); +#485797 = DIRECTION('',(0.,-1.,0.)); +#485798 = ORIENTED_EDGE('',*,*,#485799,.T.); +#485799 = EDGE_CURVE('',#485792,#485800,#485802,.T.); +#485800 = VERTEX_POINT('',#485801); +#485801 = CARTESIAN_POINT('',(137.675,-153.78,1.56)); +#485802 = CIRCLE('',#485803,7.500002932469E-02); +#485803 = AXIS2_PLACEMENT_3D('',#485804,#485805,#485806); +#485804 = CARTESIAN_POINT('',(137.67500002932,-153.7049999706,1.56)); +#485805 = DIRECTION('',(0.,0.,1.)); +#485806 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485807 = ORIENTED_EDGE('',*,*,#485808,.T.); +#485808 = EDGE_CURVE('',#485800,#485809,#485811,.T.); +#485809 = VERTEX_POINT('',#485810); +#485810 = CARTESIAN_POINT('',(137.825,-153.78,1.56)); +#485811 = LINE('',#485812,#485813); +#485812 = CARTESIAN_POINT('',(137.675,-153.78,1.56)); +#485813 = VECTOR('',#485814,1.); +#485814 = DIRECTION('',(1.,0.,0.)); +#485815 = ORIENTED_EDGE('',*,*,#485816,.T.); +#485816 = EDGE_CURVE('',#485809,#485817,#485819,.T.); +#485817 = VERTEX_POINT('',#485818); +#485818 = CARTESIAN_POINT('',(137.9,-153.705,1.56)); +#485819 = CIRCLE('',#485820,7.500002932469E-02); +#485820 = AXIS2_PLACEMENT_3D('',#485821,#485822,#485823); +#485821 = CARTESIAN_POINT('',(137.82499997067,-153.7049999706,1.56)); +#485822 = DIRECTION('',(0.,0.,1.)); +#485823 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485824 = ORIENTED_EDGE('',*,*,#485825,.T.); +#485825 = EDGE_CURVE('',#485817,#485764,#485826,.T.); +#485826 = LINE('',#485827,#485828); +#485827 = CARTESIAN_POINT('',(137.9,-153.705,1.56)); +#485828 = VECTOR('',#485829,1.); +#485829 = DIRECTION('',(0.,1.,0.)); +#485830 = FACE_BOUND('',#485831,.F.); +#485831 = EDGE_LOOP('',(#485832,#485843,#485851,#485860,#485868,#485877, + #485885,#485894)); +#485832 = ORIENTED_EDGE('',*,*,#485833,.T.); +#485833 = EDGE_CURVE('',#485834,#485836,#485838,.T.); +#485834 = VERTEX_POINT('',#485835); +#485835 = CARTESIAN_POINT('',(138.4,-152.405,1.56)); +#485836 = VERTEX_POINT('',#485837); +#485837 = CARTESIAN_POINT('',(138.325,-152.33,1.56)); +#485838 = CIRCLE('',#485839,7.500002932469E-02); +#485839 = AXIS2_PLACEMENT_3D('',#485840,#485841,#485842); +#485840 = CARTESIAN_POINT('',(138.32499997067,-152.4050000293,1.56)); +#485841 = DIRECTION('',(0.,0.,1.)); +#485842 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485843 = ORIENTED_EDGE('',*,*,#485844,.T.); +#485844 = EDGE_CURVE('',#485836,#485845,#485847,.T.); +#485845 = VERTEX_POINT('',#485846); +#485846 = CARTESIAN_POINT('',(138.175,-152.33,1.56)); +#485847 = LINE('',#485848,#485849); +#485848 = CARTESIAN_POINT('',(138.325,-152.33,1.56)); +#485849 = VECTOR('',#485850,1.); +#485850 = DIRECTION('',(-1.,0.,0.)); +#485851 = ORIENTED_EDGE('',*,*,#485852,.T.); +#485852 = EDGE_CURVE('',#485845,#485853,#485855,.T.); +#485853 = VERTEX_POINT('',#485854); +#485854 = CARTESIAN_POINT('',(138.1,-152.405,1.56)); +#485855 = CIRCLE('',#485856,7.500002932469E-02); +#485856 = AXIS2_PLACEMENT_3D('',#485857,#485858,#485859); +#485857 = CARTESIAN_POINT('',(138.17500002932,-152.4050000293,1.56)); +#485858 = DIRECTION('',(0.,0.,1.)); +#485859 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485860 = ORIENTED_EDGE('',*,*,#485861,.T.); +#485861 = EDGE_CURVE('',#485853,#485862,#485864,.T.); +#485862 = VERTEX_POINT('',#485863); +#485863 = CARTESIAN_POINT('',(138.1,-153.705,1.56)); +#485864 = LINE('',#485865,#485866); +#485865 = CARTESIAN_POINT('',(138.1,-152.405,1.56)); +#485866 = VECTOR('',#485867,1.); +#485867 = DIRECTION('',(0.,-1.,0.)); +#485868 = ORIENTED_EDGE('',*,*,#485869,.T.); +#485869 = EDGE_CURVE('',#485862,#485870,#485872,.T.); +#485870 = VERTEX_POINT('',#485871); +#485871 = CARTESIAN_POINT('',(138.175,-153.78,1.56)); +#485872 = CIRCLE('',#485873,7.500002932469E-02); +#485873 = AXIS2_PLACEMENT_3D('',#485874,#485875,#485876); +#485874 = CARTESIAN_POINT('',(138.17500002932,-153.7049999706,1.56)); +#485875 = DIRECTION('',(0.,0.,1.)); +#485876 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485877 = ORIENTED_EDGE('',*,*,#485878,.T.); +#485878 = EDGE_CURVE('',#485870,#485879,#485881,.T.); +#485879 = VERTEX_POINT('',#485880); +#485880 = CARTESIAN_POINT('',(138.325,-153.78,1.56)); +#485881 = LINE('',#485882,#485883); +#485882 = CARTESIAN_POINT('',(138.175,-153.78,1.56)); +#485883 = VECTOR('',#485884,1.); +#485884 = DIRECTION('',(1.,0.,0.)); +#485885 = ORIENTED_EDGE('',*,*,#485886,.T.); +#485886 = EDGE_CURVE('',#485879,#485887,#485889,.T.); +#485887 = VERTEX_POINT('',#485888); +#485888 = CARTESIAN_POINT('',(138.4,-153.705,1.56)); +#485889 = CIRCLE('',#485890,7.500002932469E-02); +#485890 = AXIS2_PLACEMENT_3D('',#485891,#485892,#485893); +#485891 = CARTESIAN_POINT('',(138.32499997067,-153.7049999706,1.56)); +#485892 = DIRECTION('',(0.,0.,1.)); +#485893 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485894 = ORIENTED_EDGE('',*,*,#485895,.T.); +#485895 = EDGE_CURVE('',#485887,#485834,#485896,.T.); +#485896 = LINE('',#485897,#485898); +#485897 = CARTESIAN_POINT('',(138.4,-153.705,1.56)); +#485898 = VECTOR('',#485899,1.); +#485899 = DIRECTION('',(0.,1.,0.)); +#485900 = FACE_BOUND('',#485901,.F.); +#485901 = EDGE_LOOP('',(#485902,#485913,#485921,#485930,#485938,#485947, + #485955,#485964)); +#485902 = ORIENTED_EDGE('',*,*,#485903,.T.); +#485903 = EDGE_CURVE('',#485904,#485906,#485908,.T.); +#485904 = VERTEX_POINT('',#485905); +#485905 = CARTESIAN_POINT('',(138.9,-152.405,1.56)); +#485906 = VERTEX_POINT('',#485907); +#485907 = CARTESIAN_POINT('',(138.825,-152.33,1.56)); +#485908 = CIRCLE('',#485909,7.500002932469E-02); +#485909 = AXIS2_PLACEMENT_3D('',#485910,#485911,#485912); +#485910 = CARTESIAN_POINT('',(138.82499997067,-152.4050000293,1.56)); +#485911 = DIRECTION('',(0.,0.,1.)); +#485912 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485913 = ORIENTED_EDGE('',*,*,#485914,.T.); +#485914 = EDGE_CURVE('',#485906,#485915,#485917,.T.); +#485915 = VERTEX_POINT('',#485916); +#485916 = CARTESIAN_POINT('',(138.675,-152.33,1.56)); +#485917 = LINE('',#485918,#485919); +#485918 = CARTESIAN_POINT('',(138.825,-152.33,1.56)); +#485919 = VECTOR('',#485920,1.); +#485920 = DIRECTION('',(-1.,0.,0.)); +#485921 = ORIENTED_EDGE('',*,*,#485922,.T.); +#485922 = EDGE_CURVE('',#485915,#485923,#485925,.T.); +#485923 = VERTEX_POINT('',#485924); +#485924 = CARTESIAN_POINT('',(138.6,-152.405,1.56)); +#485925 = CIRCLE('',#485926,7.500002932469E-02); +#485926 = AXIS2_PLACEMENT_3D('',#485927,#485928,#485929); +#485927 = CARTESIAN_POINT('',(138.67500002932,-152.4050000293,1.56)); +#485928 = DIRECTION('',(0.,0.,1.)); +#485929 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#485930 = ORIENTED_EDGE('',*,*,#485931,.T.); +#485931 = EDGE_CURVE('',#485923,#485932,#485934,.T.); +#485932 = VERTEX_POINT('',#485933); +#485933 = CARTESIAN_POINT('',(138.6,-153.705,1.56)); +#485934 = LINE('',#485935,#485936); +#485935 = CARTESIAN_POINT('',(138.6,-152.405,1.56)); +#485936 = VECTOR('',#485937,1.); +#485937 = DIRECTION('',(0.,-1.,0.)); +#485938 = ORIENTED_EDGE('',*,*,#485939,.T.); +#485939 = EDGE_CURVE('',#485932,#485940,#485942,.T.); +#485940 = VERTEX_POINT('',#485941); +#485941 = CARTESIAN_POINT('',(138.675,-153.78,1.56)); +#485942 = CIRCLE('',#485943,7.500002932469E-02); +#485943 = AXIS2_PLACEMENT_3D('',#485944,#485945,#485946); +#485944 = CARTESIAN_POINT('',(138.67500002932,-153.7049999706,1.56)); +#485945 = DIRECTION('',(0.,0.,1.)); +#485946 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#485947 = ORIENTED_EDGE('',*,*,#485948,.T.); +#485948 = EDGE_CURVE('',#485940,#485949,#485951,.T.); +#485949 = VERTEX_POINT('',#485950); +#485950 = CARTESIAN_POINT('',(138.825,-153.78,1.56)); +#485951 = LINE('',#485952,#485953); +#485952 = CARTESIAN_POINT('',(138.675,-153.78,1.56)); +#485953 = VECTOR('',#485954,1.); +#485954 = DIRECTION('',(1.,0.,0.)); +#485955 = ORIENTED_EDGE('',*,*,#485956,.T.); +#485956 = EDGE_CURVE('',#485949,#485957,#485959,.T.); +#485957 = VERTEX_POINT('',#485958); +#485958 = CARTESIAN_POINT('',(138.9,-153.705,1.56)); +#485959 = CIRCLE('',#485960,7.500002932469E-02); +#485960 = AXIS2_PLACEMENT_3D('',#485961,#485962,#485963); +#485961 = CARTESIAN_POINT('',(138.82499997067,-153.7049999706,1.56)); +#485962 = DIRECTION('',(0.,0.,1.)); +#485963 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#485964 = ORIENTED_EDGE('',*,*,#485965,.T.); +#485965 = EDGE_CURVE('',#485957,#485904,#485966,.T.); +#485966 = LINE('',#485967,#485968); +#485967 = CARTESIAN_POINT('',(138.9,-153.705,1.56)); +#485968 = VECTOR('',#485969,1.); +#485969 = DIRECTION('',(0.,1.,0.)); +#485970 = FACE_BOUND('',#485971,.F.); +#485971 = EDGE_LOOP('',(#485972,#485983,#485991,#486000,#486008,#486017, + #486025,#486034)); +#485972 = ORIENTED_EDGE('',*,*,#485973,.T.); +#485973 = EDGE_CURVE('',#485974,#485976,#485978,.T.); +#485974 = VERTEX_POINT('',#485975); +#485975 = CARTESIAN_POINT('',(139.4,-152.405,1.56)); +#485976 = VERTEX_POINT('',#485977); +#485977 = CARTESIAN_POINT('',(139.325,-152.33,1.56)); +#485978 = CIRCLE('',#485979,7.500002932469E-02); +#485979 = AXIS2_PLACEMENT_3D('',#485980,#485981,#485982); +#485980 = CARTESIAN_POINT('',(139.32499997067,-152.4050000293,1.56)); +#485981 = DIRECTION('',(0.,0.,1.)); +#485982 = DIRECTION('',(1.,3.909957879318E-07,-0.)); +#485983 = ORIENTED_EDGE('',*,*,#485984,.T.); +#485984 = EDGE_CURVE('',#485976,#485985,#485987,.T.); +#485985 = VERTEX_POINT('',#485986); +#485986 = CARTESIAN_POINT('',(139.175,-152.33,1.56)); +#485987 = LINE('',#485988,#485989); +#485988 = CARTESIAN_POINT('',(139.325,-152.33,1.56)); +#485989 = VECTOR('',#485990,1.); +#485990 = DIRECTION('',(-1.,0.,0.)); +#485991 = ORIENTED_EDGE('',*,*,#485992,.T.); +#485992 = EDGE_CURVE('',#485985,#485993,#485995,.T.); +#485993 = VERTEX_POINT('',#485994); +#485994 = CARTESIAN_POINT('',(139.1,-152.405,1.56)); +#485995 = CIRCLE('',#485996,7.500002932469E-02); +#485996 = AXIS2_PLACEMENT_3D('',#485997,#485998,#485999); +#485997 = CARTESIAN_POINT('',(139.17500002932,-152.4050000293,1.56)); +#485998 = DIRECTION('',(0.,0.,1.)); +#485999 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#486000 = ORIENTED_EDGE('',*,*,#486001,.T.); +#486001 = EDGE_CURVE('',#485993,#486002,#486004,.T.); +#486002 = VERTEX_POINT('',#486003); +#486003 = CARTESIAN_POINT('',(139.1,-153.705,1.56)); +#486004 = LINE('',#486005,#486006); +#486005 = CARTESIAN_POINT('',(139.1,-152.405,1.56)); +#486006 = VECTOR('',#486007,1.); +#486007 = DIRECTION('',(0.,-1.,0.)); +#486008 = ORIENTED_EDGE('',*,*,#486009,.T.); +#486009 = EDGE_CURVE('',#486002,#486010,#486012,.T.); +#486010 = VERTEX_POINT('',#486011); +#486011 = CARTESIAN_POINT('',(139.175,-153.78,1.56)); +#486012 = CIRCLE('',#486013,7.500002932469E-02); +#486013 = AXIS2_PLACEMENT_3D('',#486014,#486015,#486016); +#486014 = CARTESIAN_POINT('',(139.17500002932,-153.7049999706,1.56)); +#486015 = DIRECTION('',(0.,0.,1.)); +#486016 = DIRECTION('',(-1.,-3.909957879318E-07,0.)); +#486017 = ORIENTED_EDGE('',*,*,#486018,.T.); +#486018 = EDGE_CURVE('',#486010,#486019,#486021,.T.); +#486019 = VERTEX_POINT('',#486020); +#486020 = CARTESIAN_POINT('',(139.325,-153.78,1.56)); +#486021 = LINE('',#486022,#486023); +#486022 = CARTESIAN_POINT('',(139.175,-153.78,1.56)); +#486023 = VECTOR('',#486024,1.); +#486024 = DIRECTION('',(1.,0.,0.)); +#486025 = ORIENTED_EDGE('',*,*,#486026,.T.); +#486026 = EDGE_CURVE('',#486019,#486027,#486029,.T.); +#486027 = VERTEX_POINT('',#486028); +#486028 = CARTESIAN_POINT('',(139.4,-153.705,1.56)); +#486029 = CIRCLE('',#486030,7.500002932469E-02); +#486030 = AXIS2_PLACEMENT_3D('',#486031,#486032,#486033); +#486031 = CARTESIAN_POINT('',(139.32499997067,-153.7049999706,1.56)); +#486032 = DIRECTION('',(0.,0.,1.)); +#486033 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#486034 = ORIENTED_EDGE('',*,*,#486035,.T.); +#486035 = EDGE_CURVE('',#486027,#485974,#486036,.T.); +#486036 = LINE('',#486037,#486038); +#486037 = CARTESIAN_POINT('',(139.4,-153.705,1.56)); +#486038 = VECTOR('',#486039,1.); +#486039 = DIRECTION('',(0.,1.,0.)); +#486040 = FACE_BOUND('',#486041,.F.); +#486041 = EDGE_LOOP('',(#486042,#486053,#486061,#486070,#486078,#486087, + #486095,#486104)); +#486042 = ORIENTED_EDGE('',*,*,#486043,.T.); +#486043 = EDGE_CURVE('',#486044,#486046,#486048,.T.); +#486044 = VERTEX_POINT('',#486045); +#486045 = CARTESIAN_POINT('',(140.25,-152.48,1.56)); +#486046 = VERTEX_POINT('',#486047); +#486047 = CARTESIAN_POINT('',(140.1,-152.33,1.56)); +#486048 = CIRCLE('',#486049,0.150000058649); +#486049 = AXIS2_PLACEMENT_3D('',#486050,#486051,#486052); +#486050 = CARTESIAN_POINT('',(140.09999994135,-152.4800000586,1.56)); +#486051 = DIRECTION('',(0.,0.,1.)); +#486052 = DIRECTION('',(1.,3.90995219498E-07,-0.)); +#486053 = ORIENTED_EDGE('',*,*,#486054,.T.); +#486054 = EDGE_CURVE('',#486046,#486055,#486057,.T.); +#486055 = VERTEX_POINT('',#486056); +#486056 = CARTESIAN_POINT('',(139.8,-152.33,1.56)); +#486057 = LINE('',#486058,#486059); +#486058 = CARTESIAN_POINT('',(140.1,-152.33,1.56)); +#486059 = VECTOR('',#486060,1.); +#486060 = DIRECTION('',(-1.,0.,0.)); +#486061 = ORIENTED_EDGE('',*,*,#486062,.T.); +#486062 = EDGE_CURVE('',#486055,#486063,#486065,.T.); +#486063 = VERTEX_POINT('',#486064); +#486064 = CARTESIAN_POINT('',(139.65,-152.48,1.56)); +#486065 = CIRCLE('',#486066,0.150000058649); +#486066 = AXIS2_PLACEMENT_3D('',#486067,#486068,#486069); +#486067 = CARTESIAN_POINT('',(139.80000005864,-152.4800000586,1.56)); +#486068 = DIRECTION('',(0.,0.,1.)); +#486069 = DIRECTION('',(-3.90995219498E-07,1.,0.)); +#486070 = ORIENTED_EDGE('',*,*,#486071,.T.); +#486071 = EDGE_CURVE('',#486063,#486072,#486074,.T.); +#486072 = VERTEX_POINT('',#486073); +#486073 = CARTESIAN_POINT('',(139.65,-153.63,1.56)); +#486074 = LINE('',#486075,#486076); +#486075 = CARTESIAN_POINT('',(139.65,-152.48,1.56)); +#486076 = VECTOR('',#486077,1.); +#486077 = DIRECTION('',(0.,-1.,0.)); +#486078 = ORIENTED_EDGE('',*,*,#486079,.T.); +#486079 = EDGE_CURVE('',#486072,#486080,#486082,.T.); +#486080 = VERTEX_POINT('',#486081); +#486081 = CARTESIAN_POINT('',(139.8,-153.78,1.56)); +#486082 = CIRCLE('',#486083,0.150000058649); +#486083 = AXIS2_PLACEMENT_3D('',#486084,#486085,#486086); +#486084 = CARTESIAN_POINT('',(139.80000005864,-153.6299999413,1.56)); +#486085 = DIRECTION('',(0.,0.,1.)); +#486086 = DIRECTION('',(-1.,-3.909955984538E-07,0.)); +#486087 = ORIENTED_EDGE('',*,*,#486088,.T.); +#486088 = EDGE_CURVE('',#486080,#486089,#486091,.T.); +#486089 = VERTEX_POINT('',#486090); +#486090 = CARTESIAN_POINT('',(140.1,-153.78,1.56)); +#486091 = LINE('',#486092,#486093); +#486092 = CARTESIAN_POINT('',(139.8,-153.78,1.56)); +#486093 = VECTOR('',#486094,1.); +#486094 = DIRECTION('',(1.,0.,0.)); +#486095 = ORIENTED_EDGE('',*,*,#486096,.T.); +#486096 = EDGE_CURVE('',#486089,#486097,#486099,.T.); +#486097 = VERTEX_POINT('',#486098); +#486098 = CARTESIAN_POINT('',(140.25,-153.63,1.56)); +#486099 = CIRCLE('',#486100,0.150000058649); +#486100 = AXIS2_PLACEMENT_3D('',#486101,#486102,#486103); +#486101 = CARTESIAN_POINT('',(140.09999994135,-153.6299999413,1.56)); +#486102 = DIRECTION('',(0.,0.,1.)); +#486103 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#486104 = ORIENTED_EDGE('',*,*,#486105,.T.); +#486105 = EDGE_CURVE('',#486097,#486044,#486106,.T.); +#486106 = LINE('',#486107,#486108); +#486107 = CARTESIAN_POINT('',(140.25,-153.63,1.56)); +#486108 = VECTOR('',#486109,1.); +#486109 = DIRECTION('',(0.,1.,0.)); +#486110 = FACE_BOUND('',#486111,.F.); +#486111 = EDGE_LOOP('',(#486112,#486123,#486131,#486140,#486148,#486157, + #486165,#486174)); +#486112 = ORIENTED_EDGE('',*,*,#486113,.T.); +#486113 = EDGE_CURVE('',#486114,#486116,#486118,.T.); +#486114 = VERTEX_POINT('',#486115); +#486115 = CARTESIAN_POINT('',(141.05,-152.48,1.56)); +#486116 = VERTEX_POINT('',#486117); +#486117 = CARTESIAN_POINT('',(140.9,-152.33,1.56)); +#486118 = CIRCLE('',#486119,0.150000058649); +#486119 = AXIS2_PLACEMENT_3D('',#486120,#486121,#486122); +#486120 = CARTESIAN_POINT('',(140.89999994135,-152.4800000586,1.56)); +#486121 = DIRECTION('',(0.,0.,1.)); +#486122 = DIRECTION('',(1.,3.90995219498E-07,-0.)); +#486123 = ORIENTED_EDGE('',*,*,#486124,.T.); +#486124 = EDGE_CURVE('',#486116,#486125,#486127,.T.); +#486125 = VERTEX_POINT('',#486126); +#486126 = CARTESIAN_POINT('',(140.6,-152.33,1.56)); +#486127 = LINE('',#486128,#486129); +#486128 = CARTESIAN_POINT('',(140.9,-152.33,1.56)); +#486129 = VECTOR('',#486130,1.); +#486130 = DIRECTION('',(-1.,0.,0.)); +#486131 = ORIENTED_EDGE('',*,*,#486132,.T.); +#486132 = EDGE_CURVE('',#486125,#486133,#486135,.T.); +#486133 = VERTEX_POINT('',#486134); +#486134 = CARTESIAN_POINT('',(140.45,-152.48,1.56)); +#486135 = CIRCLE('',#486136,0.150000058649); +#486136 = AXIS2_PLACEMENT_3D('',#486137,#486138,#486139); +#486137 = CARTESIAN_POINT('',(140.60000005864,-152.4800000586,1.56)); +#486138 = DIRECTION('',(0.,0.,1.)); +#486139 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#486140 = ORIENTED_EDGE('',*,*,#486141,.T.); +#486141 = EDGE_CURVE('',#486133,#486142,#486144,.T.); +#486142 = VERTEX_POINT('',#486143); +#486143 = CARTESIAN_POINT('',(140.45,-153.63,1.56)); +#486144 = LINE('',#486145,#486146); +#486145 = CARTESIAN_POINT('',(140.45,-152.48,1.56)); +#486146 = VECTOR('',#486147,1.); +#486147 = DIRECTION('',(0.,-1.,0.)); +#486148 = ORIENTED_EDGE('',*,*,#486149,.T.); +#486149 = EDGE_CURVE('',#486142,#486150,#486152,.T.); +#486150 = VERTEX_POINT('',#486151); +#486151 = CARTESIAN_POINT('',(140.6,-153.78,1.56)); +#486152 = CIRCLE('',#486153,0.150000058649); +#486153 = AXIS2_PLACEMENT_3D('',#486154,#486155,#486156); +#486154 = CARTESIAN_POINT('',(140.60000005864,-153.6299999413,1.56)); +#486155 = DIRECTION('',(0.,0.,1.)); +#486156 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#486157 = ORIENTED_EDGE('',*,*,#486158,.T.); +#486158 = EDGE_CURVE('',#486150,#486159,#486161,.T.); +#486159 = VERTEX_POINT('',#486160); +#486160 = CARTESIAN_POINT('',(140.9,-153.78,1.56)); +#486161 = LINE('',#486162,#486163); +#486162 = CARTESIAN_POINT('',(140.6,-153.78,1.56)); +#486163 = VECTOR('',#486164,1.); +#486164 = DIRECTION('',(1.,0.,0.)); +#486165 = ORIENTED_EDGE('',*,*,#486166,.T.); +#486166 = EDGE_CURVE('',#486159,#486167,#486169,.T.); +#486167 = VERTEX_POINT('',#486168); +#486168 = CARTESIAN_POINT('',(141.05,-153.63,1.56)); +#486169 = CIRCLE('',#486170,0.150000058649); +#486170 = AXIS2_PLACEMENT_3D('',#486171,#486172,#486173); +#486171 = CARTESIAN_POINT('',(140.89999994135,-153.6299999413,1.56)); +#486172 = DIRECTION('',(0.,0.,1.)); +#486173 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#486174 = ORIENTED_EDGE('',*,*,#486175,.T.); +#486175 = EDGE_CURVE('',#486167,#486114,#486176,.T.); +#486176 = LINE('',#486177,#486178); +#486177 = CARTESIAN_POINT('',(141.05,-153.63,1.56)); +#486178 = VECTOR('',#486179,1.); +#486179 = DIRECTION('',(0.,1.,0.)); +#486180 = FACE_BOUND('',#486181,.F.); +#486181 = EDGE_LOOP('',(#486182,#486193,#486201,#486210,#486218,#486227, + #486235,#486244)); +#486182 = ORIENTED_EDGE('',*,*,#486183,.T.); +#486183 = EDGE_CURVE('',#486184,#486186,#486188,.T.); +#486184 = VERTEX_POINT('',#486185); +#486185 = CARTESIAN_POINT('',(148.57,-153.125,1.56)); +#486186 = VERTEX_POINT('',#486187); +#486187 = CARTESIAN_POINT('',(148.435,-152.99,1.56)); +#486188 = CIRCLE('',#486189,0.135001418495); +#486189 = AXIS2_PLACEMENT_3D('',#486190,#486191,#486192); +#486190 = CARTESIAN_POINT('',(148.43499858151,-153.1250014184,1.56)); +#486191 = DIRECTION('',(0.,0.,1.)); +#486192 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#486193 = ORIENTED_EDGE('',*,*,#486194,.T.); +#486194 = EDGE_CURVE('',#486186,#486195,#486197,.T.); +#486195 = VERTEX_POINT('',#486196); +#486196 = CARTESIAN_POINT('',(148.065,-152.99,1.56)); +#486197 = LINE('',#486198,#486199); +#486198 = CARTESIAN_POINT('',(148.435,-152.99,1.56)); +#486199 = VECTOR('',#486200,1.); +#486200 = DIRECTION('',(-1.,0.,0.)); +#486201 = ORIENTED_EDGE('',*,*,#486202,.T.); +#486202 = EDGE_CURVE('',#486195,#486203,#486205,.T.); +#486203 = VERTEX_POINT('',#486204); +#486204 = CARTESIAN_POINT('',(147.93,-153.125,1.56)); +#486205 = CIRCLE('',#486206,0.135001418495); +#486206 = AXIS2_PLACEMENT_3D('',#486207,#486208,#486209); +#486207 = CARTESIAN_POINT('',(148.06500141848,-153.1250014184,1.56)); +#486208 = DIRECTION('',(0.,0.,1.)); +#486209 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#486210 = ORIENTED_EDGE('',*,*,#486211,.T.); +#486211 = EDGE_CURVE('',#486203,#486212,#486214,.T.); +#486212 = VERTEX_POINT('',#486213); +#486213 = CARTESIAN_POINT('',(147.93,-153.395,1.56)); +#486214 = LINE('',#486215,#486216); +#486215 = CARTESIAN_POINT('',(147.93,-153.125,1.56)); +#486216 = VECTOR('',#486217,1.); +#486217 = DIRECTION('',(0.,-1.,0.)); +#486218 = ORIENTED_EDGE('',*,*,#486219,.T.); +#486219 = EDGE_CURVE('',#486212,#486220,#486222,.T.); +#486220 = VERTEX_POINT('',#486221); +#486221 = CARTESIAN_POINT('',(148.065,-153.53,1.56)); +#486222 = CIRCLE('',#486223,0.135001418495); +#486223 = AXIS2_PLACEMENT_3D('',#486224,#486225,#486226); +#486224 = CARTESIAN_POINT('',(148.06500141848,-153.3949985815,1.56)); +#486225 = DIRECTION('',(0.,0.,1.)); +#486226 = DIRECTION('',(-0.999999999945,-1.050720672682E-05,0.)); +#486227 = ORIENTED_EDGE('',*,*,#486228,.T.); +#486228 = EDGE_CURVE('',#486220,#486229,#486231,.T.); +#486229 = VERTEX_POINT('',#486230); +#486230 = CARTESIAN_POINT('',(148.435,-153.53,1.56)); +#486231 = LINE('',#486232,#486233); +#486232 = CARTESIAN_POINT('',(148.065,-153.53,1.56)); +#486233 = VECTOR('',#486234,1.); +#486234 = DIRECTION('',(1.,0.,0.)); +#486235 = ORIENTED_EDGE('',*,*,#486236,.T.); +#486236 = EDGE_CURVE('',#486229,#486237,#486239,.T.); +#486237 = VERTEX_POINT('',#486238); +#486238 = CARTESIAN_POINT('',(148.57,-153.395,1.56)); +#486239 = CIRCLE('',#486240,0.135001418495); +#486240 = AXIS2_PLACEMENT_3D('',#486241,#486242,#486243); +#486241 = CARTESIAN_POINT('',(148.43499858151,-153.3949985815,1.56)); +#486242 = DIRECTION('',(0.,0.,1.)); +#486243 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#486244 = ORIENTED_EDGE('',*,*,#486245,.T.); +#486245 = EDGE_CURVE('',#486237,#486184,#486246,.T.); +#486246 = LINE('',#486247,#486248); +#486247 = CARTESIAN_POINT('',(148.57,-153.395,1.56)); +#486248 = VECTOR('',#486249,1.); +#486249 = DIRECTION('',(0.,1.,0.)); +#486250 = FACE_BOUND('',#486251,.F.); +#486251 = EDGE_LOOP('',(#486252,#486263,#486271,#486280,#486288,#486297, + #486305,#486314)); +#486252 = ORIENTED_EDGE('',*,*,#486253,.T.); +#486253 = EDGE_CURVE('',#486254,#486256,#486258,.T.); +#486254 = VERTEX_POINT('',#486255); +#486255 = CARTESIAN_POINT('',(128.07,-153.115,1.56)); +#486256 = VERTEX_POINT('',#486257); +#486257 = CARTESIAN_POINT('',(127.935,-152.98,1.56)); +#486258 = CIRCLE('',#486259,0.135001418495); +#486259 = AXIS2_PLACEMENT_3D('',#486260,#486261,#486262); +#486260 = CARTESIAN_POINT('',(127.93499858151,-153.1150014184,1.56)); +#486261 = DIRECTION('',(0.,0.,1.)); +#486262 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#486263 = ORIENTED_EDGE('',*,*,#486264,.T.); +#486264 = EDGE_CURVE('',#486256,#486265,#486267,.T.); +#486265 = VERTEX_POINT('',#486266); +#486266 = CARTESIAN_POINT('',(127.565,-152.98,1.56)); +#486267 = LINE('',#486268,#486269); +#486268 = CARTESIAN_POINT('',(127.935,-152.98,1.56)); +#486269 = VECTOR('',#486270,1.); +#486270 = DIRECTION('',(-1.,0.,0.)); +#486271 = ORIENTED_EDGE('',*,*,#486272,.T.); +#486272 = EDGE_CURVE('',#486265,#486273,#486275,.T.); +#486273 = VERTEX_POINT('',#486274); +#486274 = CARTESIAN_POINT('',(127.43,-153.115,1.56)); +#486275 = CIRCLE('',#486276,0.135001418495); +#486276 = AXIS2_PLACEMENT_3D('',#486277,#486278,#486279); +#486277 = CARTESIAN_POINT('',(127.56500141848,-153.1150014184,1.56)); +#486278 = DIRECTION('',(0.,0.,1.)); +#486279 = DIRECTION('',(-1.050720662155E-05,0.999999999945,0.)); +#486280 = ORIENTED_EDGE('',*,*,#486281,.T.); +#486281 = EDGE_CURVE('',#486273,#486282,#486284,.T.); +#486282 = VERTEX_POINT('',#486283); +#486283 = CARTESIAN_POINT('',(127.43,-153.385,1.56)); +#486284 = LINE('',#486285,#486286); +#486285 = CARTESIAN_POINT('',(127.43,-153.115,1.56)); +#486286 = VECTOR('',#486287,1.); +#486287 = DIRECTION('',(0.,-1.,0.)); +#486288 = ORIENTED_EDGE('',*,*,#486289,.T.); +#486289 = EDGE_CURVE('',#486282,#486290,#486292,.T.); +#486290 = VERTEX_POINT('',#486291); +#486291 = CARTESIAN_POINT('',(127.565,-153.52,1.56)); +#486292 = CIRCLE('',#486293,0.135001418495); +#486293 = AXIS2_PLACEMENT_3D('',#486294,#486295,#486296); +#486294 = CARTESIAN_POINT('',(127.56500141848,-153.3849985815,1.56)); +#486295 = DIRECTION('',(0.,0.,1.)); +#486296 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#486297 = ORIENTED_EDGE('',*,*,#486298,.T.); +#486298 = EDGE_CURVE('',#486290,#486299,#486301,.T.); +#486299 = VERTEX_POINT('',#486300); +#486300 = CARTESIAN_POINT('',(127.935,-153.52,1.56)); +#486301 = LINE('',#486302,#486303); +#486302 = CARTESIAN_POINT('',(127.565,-153.52,1.56)); +#486303 = VECTOR('',#486304,1.); +#486304 = DIRECTION('',(1.,0.,0.)); +#486305 = ORIENTED_EDGE('',*,*,#486306,.T.); +#486306 = EDGE_CURVE('',#486299,#486307,#486309,.T.); +#486307 = VERTEX_POINT('',#486308); +#486308 = CARTESIAN_POINT('',(128.07,-153.385,1.56)); +#486309 = CIRCLE('',#486310,0.135001418495); +#486310 = AXIS2_PLACEMENT_3D('',#486311,#486312,#486313); +#486311 = CARTESIAN_POINT('',(127.93499858151,-153.3849985815,1.56)); +#486312 = DIRECTION('',(0.,0.,1.)); +#486313 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#486314 = ORIENTED_EDGE('',*,*,#486315,.T.); +#486315 = EDGE_CURVE('',#486307,#486254,#486316,.T.); +#486316 = LINE('',#486317,#486318); +#486317 = CARTESIAN_POINT('',(128.07,-153.385,1.56)); +#486318 = VECTOR('',#486319,1.); +#486319 = DIRECTION('',(0.,1.,0.)); +#486320 = FACE_BOUND('',#486321,.F.); +#486321 = EDGE_LOOP('',(#486322,#486333,#486341,#486350,#486358,#486367, + #486375,#486384)); +#486322 = ORIENTED_EDGE('',*,*,#486323,.T.); +#486323 = EDGE_CURVE('',#486324,#486326,#486328,.T.); +#486324 = VERTEX_POINT('',#486325); +#486325 = CARTESIAN_POINT('',(129.32,-153.115,1.56)); +#486326 = VERTEX_POINT('',#486327); +#486327 = CARTESIAN_POINT('',(129.185,-152.98,1.56)); +#486328 = CIRCLE('',#486329,0.135001418495); +#486329 = AXIS2_PLACEMENT_3D('',#486330,#486331,#486332); +#486330 = CARTESIAN_POINT('',(129.18499858151,-153.1150014184,1.56)); +#486331 = DIRECTION('',(0.,0.,1.)); +#486332 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#486333 = ORIENTED_EDGE('',*,*,#486334,.T.); +#486334 = EDGE_CURVE('',#486326,#486335,#486337,.T.); +#486335 = VERTEX_POINT('',#486336); +#486336 = CARTESIAN_POINT('',(128.815,-152.98,1.56)); +#486337 = LINE('',#486338,#486339); +#486338 = CARTESIAN_POINT('',(129.185,-152.98,1.56)); +#486339 = VECTOR('',#486340,1.); +#486340 = DIRECTION('',(-1.,0.,0.)); +#486341 = ORIENTED_EDGE('',*,*,#486342,.T.); +#486342 = EDGE_CURVE('',#486335,#486343,#486345,.T.); +#486343 = VERTEX_POINT('',#486344); +#486344 = CARTESIAN_POINT('',(128.68,-153.115,1.56)); +#486345 = CIRCLE('',#486346,0.135001418495); +#486346 = AXIS2_PLACEMENT_3D('',#486347,#486348,#486349); +#486347 = CARTESIAN_POINT('',(128.81500141848,-153.1150014184,1.56)); +#486348 = DIRECTION('',(0.,0.,1.)); +#486349 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#486350 = ORIENTED_EDGE('',*,*,#486351,.T.); +#486351 = EDGE_CURVE('',#486343,#486352,#486354,.T.); +#486352 = VERTEX_POINT('',#486353); +#486353 = CARTESIAN_POINT('',(128.68,-153.385,1.56)); +#486354 = LINE('',#486355,#486356); +#486355 = CARTESIAN_POINT('',(128.68,-153.115,1.56)); +#486356 = VECTOR('',#486357,1.); +#486357 = DIRECTION('',(0.,-1.,0.)); +#486358 = ORIENTED_EDGE('',*,*,#486359,.T.); +#486359 = EDGE_CURVE('',#486352,#486360,#486362,.T.); +#486360 = VERTEX_POINT('',#486361); +#486361 = CARTESIAN_POINT('',(128.815,-153.52,1.56)); +#486362 = CIRCLE('',#486363,0.135001418495); +#486363 = AXIS2_PLACEMENT_3D('',#486364,#486365,#486366); +#486364 = CARTESIAN_POINT('',(128.81500141848,-153.3849985815,1.56)); +#486365 = DIRECTION('',(0.,0.,1.)); +#486366 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#486367 = ORIENTED_EDGE('',*,*,#486368,.T.); +#486368 = EDGE_CURVE('',#486360,#486369,#486371,.T.); +#486369 = VERTEX_POINT('',#486370); +#486370 = CARTESIAN_POINT('',(129.185,-153.52,1.56)); +#486371 = LINE('',#486372,#486373); +#486372 = CARTESIAN_POINT('',(128.815,-153.52,1.56)); +#486373 = VECTOR('',#486374,1.); +#486374 = DIRECTION('',(1.,0.,0.)); +#486375 = ORIENTED_EDGE('',*,*,#486376,.T.); +#486376 = EDGE_CURVE('',#486369,#486377,#486379,.T.); +#486377 = VERTEX_POINT('',#486378); +#486378 = CARTESIAN_POINT('',(129.32,-153.385,1.56)); +#486379 = CIRCLE('',#486380,0.135001418495); +#486380 = AXIS2_PLACEMENT_3D('',#486381,#486382,#486383); +#486381 = CARTESIAN_POINT('',(129.18499858151,-153.3849985815,1.56)); +#486382 = DIRECTION('',(0.,0.,1.)); +#486383 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#486384 = ORIENTED_EDGE('',*,*,#486385,.T.); +#486385 = EDGE_CURVE('',#486377,#486324,#486386,.T.); +#486386 = LINE('',#486387,#486388); +#486387 = CARTESIAN_POINT('',(129.32,-153.385,1.56)); +#486388 = VECTOR('',#486389,1.); +#486389 = DIRECTION('',(0.,1.,0.)); +#486390 = FACE_BOUND('',#486391,.F.); +#486391 = EDGE_LOOP('',(#486392,#486403,#486411,#486420,#486428,#486437, + #486445,#486454)); +#486392 = ORIENTED_EDGE('',*,*,#486393,.T.); +#486393 = EDGE_CURVE('',#486394,#486396,#486398,.T.); +#486394 = VERTEX_POINT('',#486395); +#486395 = CARTESIAN_POINT('',(130.57,-153.115,1.56)); +#486396 = VERTEX_POINT('',#486397); +#486397 = CARTESIAN_POINT('',(130.435,-152.98,1.56)); +#486398 = CIRCLE('',#486399,0.135001418495); +#486399 = AXIS2_PLACEMENT_3D('',#486400,#486401,#486402); +#486400 = CARTESIAN_POINT('',(130.43499858151,-153.1150014184,1.56)); +#486401 = DIRECTION('',(0.,0.,1.)); +#486402 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#486403 = ORIENTED_EDGE('',*,*,#486404,.T.); +#486404 = EDGE_CURVE('',#486396,#486405,#486407,.T.); +#486405 = VERTEX_POINT('',#486406); +#486406 = CARTESIAN_POINT('',(130.065,-152.98,1.56)); +#486407 = LINE('',#486408,#486409); +#486408 = CARTESIAN_POINT('',(130.435,-152.98,1.56)); +#486409 = VECTOR('',#486410,1.); +#486410 = DIRECTION('',(-1.,0.,0.)); +#486411 = ORIENTED_EDGE('',*,*,#486412,.T.); +#486412 = EDGE_CURVE('',#486405,#486413,#486415,.T.); +#486413 = VERTEX_POINT('',#486414); +#486414 = CARTESIAN_POINT('',(129.93,-153.115,1.56)); +#486415 = CIRCLE('',#486416,0.135001418495); +#486416 = AXIS2_PLACEMENT_3D('',#486417,#486418,#486419); +#486417 = CARTESIAN_POINT('',(130.06500141848,-153.1150014184,1.56)); +#486418 = DIRECTION('',(0.,0.,1.)); +#486419 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#486420 = ORIENTED_EDGE('',*,*,#486421,.T.); +#486421 = EDGE_CURVE('',#486413,#486422,#486424,.T.); +#486422 = VERTEX_POINT('',#486423); +#486423 = CARTESIAN_POINT('',(129.93,-153.385,1.56)); +#486424 = LINE('',#486425,#486426); +#486425 = CARTESIAN_POINT('',(129.93,-153.115,1.56)); +#486426 = VECTOR('',#486427,1.); +#486427 = DIRECTION('',(0.,-1.,0.)); +#486428 = ORIENTED_EDGE('',*,*,#486429,.T.); +#486429 = EDGE_CURVE('',#486422,#486430,#486432,.T.); +#486430 = VERTEX_POINT('',#486431); +#486431 = CARTESIAN_POINT('',(130.065,-153.52,1.56)); +#486432 = CIRCLE('',#486433,0.135001418495); +#486433 = AXIS2_PLACEMENT_3D('',#486434,#486435,#486436); +#486434 = CARTESIAN_POINT('',(130.06500141848,-153.3849985815,1.56)); +#486435 = DIRECTION('',(0.,0.,1.)); +#486436 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#486437 = ORIENTED_EDGE('',*,*,#486438,.T.); +#486438 = EDGE_CURVE('',#486430,#486439,#486441,.T.); +#486439 = VERTEX_POINT('',#486440); +#486440 = CARTESIAN_POINT('',(130.435,-153.52,1.56)); +#486441 = LINE('',#486442,#486443); +#486442 = CARTESIAN_POINT('',(130.065,-153.52,1.56)); +#486443 = VECTOR('',#486444,1.); +#486444 = DIRECTION('',(1.,0.,0.)); +#486445 = ORIENTED_EDGE('',*,*,#486446,.T.); +#486446 = EDGE_CURVE('',#486439,#486447,#486449,.T.); +#486447 = VERTEX_POINT('',#486448); +#486448 = CARTESIAN_POINT('',(130.57,-153.385,1.56)); +#486449 = CIRCLE('',#486450,0.135001418495); +#486450 = AXIS2_PLACEMENT_3D('',#486451,#486452,#486453); +#486451 = CARTESIAN_POINT('',(130.43499858151,-153.3849985815,1.56)); +#486452 = DIRECTION('',(0.,0.,1.)); +#486453 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#486454 = ORIENTED_EDGE('',*,*,#486455,.T.); +#486455 = EDGE_CURVE('',#486447,#486394,#486456,.T.); +#486456 = LINE('',#486457,#486458); +#486457 = CARTESIAN_POINT('',(130.57,-153.385,1.56)); +#486458 = VECTOR('',#486459,1.); +#486459 = DIRECTION('',(0.,1.,0.)); +#486460 = FACE_BOUND('',#486461,.F.); +#486461 = EDGE_LOOP('',(#486462,#486473,#486481,#486490,#486498,#486507, + #486515,#486524)); +#486462 = ORIENTED_EDGE('',*,*,#486463,.T.); +#486463 = EDGE_CURVE('',#486464,#486466,#486468,.T.); +#486464 = VERTEX_POINT('',#486465); +#486465 = CARTESIAN_POINT('',(150.81,-153.09,1.56)); +#486466 = VERTEX_POINT('',#486467); +#486467 = CARTESIAN_POINT('',(150.67,-152.95,1.56)); +#486468 = CIRCLE('',#486469,0.139999827125); +#486469 = AXIS2_PLACEMENT_3D('',#486470,#486471,#486472); +#486470 = CARTESIAN_POINT('',(150.67000017287,-153.0899998271,1.56)); +#486471 = DIRECTION('',(0.,0.,1.)); +#486472 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#486473 = ORIENTED_EDGE('',*,*,#486474,.T.); +#486474 = EDGE_CURVE('',#486466,#486475,#486477,.T.); +#486475 = VERTEX_POINT('',#486476); +#486476 = CARTESIAN_POINT('',(150.33,-152.95,1.56)); +#486477 = LINE('',#486478,#486479); +#486478 = CARTESIAN_POINT('',(150.67,-152.95,1.56)); +#486479 = VECTOR('',#486480,1.); +#486480 = DIRECTION('',(-1.,0.,0.)); +#486481 = ORIENTED_EDGE('',*,*,#486482,.T.); +#486482 = EDGE_CURVE('',#486475,#486483,#486485,.T.); +#486483 = VERTEX_POINT('',#486484); +#486484 = CARTESIAN_POINT('',(150.19,-153.09,1.56)); +#486485 = CIRCLE('',#486486,0.139999827125); +#486486 = AXIS2_PLACEMENT_3D('',#486487,#486488,#486489); +#486487 = CARTESIAN_POINT('',(150.32999982712,-153.0899998271,1.56)); +#486488 = DIRECTION('',(0.,0.,1.)); +#486489 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#486490 = ORIENTED_EDGE('',*,*,#486491,.T.); +#486491 = EDGE_CURVE('',#486483,#486492,#486494,.T.); +#486492 = VERTEX_POINT('',#486493); +#486493 = CARTESIAN_POINT('',(150.19,-153.37,1.56)); +#486494 = LINE('',#486495,#486496); +#486495 = CARTESIAN_POINT('',(150.19,-153.09,1.56)); +#486496 = VECTOR('',#486497,1.); +#486497 = DIRECTION('',(0.,-1.,0.)); +#486498 = ORIENTED_EDGE('',*,*,#486499,.T.); +#486499 = EDGE_CURVE('',#486492,#486500,#486502,.T.); +#486500 = VERTEX_POINT('',#486501); +#486501 = CARTESIAN_POINT('',(150.33,-153.51,1.56)); +#486502 = CIRCLE('',#486503,0.139999827125); +#486503 = AXIS2_PLACEMENT_3D('',#486504,#486505,#486506); +#486504 = CARTESIAN_POINT('',(150.32999982712,-153.3700001728,1.56)); +#486505 = DIRECTION('',(0.,0.,1.)); +#486506 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#486507 = ORIENTED_EDGE('',*,*,#486508,.T.); +#486508 = EDGE_CURVE('',#486500,#486509,#486511,.T.); +#486509 = VERTEX_POINT('',#486510); +#486510 = CARTESIAN_POINT('',(150.67,-153.51,1.56)); +#486511 = LINE('',#486512,#486513); +#486512 = CARTESIAN_POINT('',(150.33,-153.51,1.56)); +#486513 = VECTOR('',#486514,1.); +#486514 = DIRECTION('',(1.,0.,0.)); +#486515 = ORIENTED_EDGE('',*,*,#486516,.T.); +#486516 = EDGE_CURVE('',#486509,#486517,#486519,.T.); +#486517 = VERTEX_POINT('',#486518); +#486518 = CARTESIAN_POINT('',(150.81,-153.37,1.56)); +#486519 = CIRCLE('',#486520,0.139999827125); +#486520 = AXIS2_PLACEMENT_3D('',#486521,#486522,#486523); +#486521 = CARTESIAN_POINT('',(150.67000017287,-153.3700001728,1.56)); +#486522 = DIRECTION('',(0.,0.,1.)); +#486523 = DIRECTION('',(-1.234820451254E-06,-0.999999999999,0.)); +#486524 = ORIENTED_EDGE('',*,*,#486525,.T.); +#486525 = EDGE_CURVE('',#486517,#486464,#486526,.T.); +#486526 = LINE('',#486527,#486528); +#486527 = CARTESIAN_POINT('',(150.81,-153.37,1.56)); +#486528 = VECTOR('',#486529,1.); +#486529 = DIRECTION('',(0.,1.,0.)); +#486530 = FACE_BOUND('',#486531,.F.); +#486531 = EDGE_LOOP('',(#486532,#486543,#486551,#486560,#486568,#486577, + #486585,#486594)); +#486532 = ORIENTED_EDGE('',*,*,#486533,.T.); +#486533 = EDGE_CURVE('',#486534,#486536,#486538,.T.); +#486534 = VERTEX_POINT('',#486535); +#486535 = CARTESIAN_POINT('',(144.01,-152.565,1.56)); +#486536 = VERTEX_POINT('',#486537); +#486537 = CARTESIAN_POINT('',(143.875,-152.43,1.56)); +#486538 = CIRCLE('',#486539,0.135001418495); +#486539 = AXIS2_PLACEMENT_3D('',#486540,#486541,#486542); +#486540 = CARTESIAN_POINT('',(143.87499858151,-152.5650014184,1.56)); +#486541 = DIRECTION('',(0.,0.,1.)); +#486542 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#486543 = ORIENTED_EDGE('',*,*,#486544,.T.); +#486544 = EDGE_CURVE('',#486536,#486545,#486547,.T.); +#486545 = VERTEX_POINT('',#486546); +#486546 = CARTESIAN_POINT('',(143.605,-152.43,1.56)); +#486547 = LINE('',#486548,#486549); +#486548 = CARTESIAN_POINT('',(143.875,-152.43,1.56)); +#486549 = VECTOR('',#486550,1.); +#486550 = DIRECTION('',(-1.,0.,0.)); +#486551 = ORIENTED_EDGE('',*,*,#486552,.T.); +#486552 = EDGE_CURVE('',#486545,#486553,#486555,.T.); +#486553 = VERTEX_POINT('',#486554); +#486554 = CARTESIAN_POINT('',(143.47,-152.565,1.56)); +#486555 = CIRCLE('',#486556,0.135001418495); +#486556 = AXIS2_PLACEMENT_3D('',#486557,#486558,#486559); +#486557 = CARTESIAN_POINT('',(143.60500141848,-152.5650014184,1.56)); +#486558 = DIRECTION('',(0.,0.,1.)); +#486559 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#486560 = ORIENTED_EDGE('',*,*,#486561,.T.); +#486561 = EDGE_CURVE('',#486553,#486562,#486564,.T.); +#486562 = VERTEX_POINT('',#486563); +#486563 = CARTESIAN_POINT('',(143.47,-152.935,1.56)); +#486564 = LINE('',#486565,#486566); +#486565 = CARTESIAN_POINT('',(143.47,-152.565,1.56)); +#486566 = VECTOR('',#486567,1.); +#486567 = DIRECTION('',(0.,-1.,0.)); +#486568 = ORIENTED_EDGE('',*,*,#486569,.T.); +#486569 = EDGE_CURVE('',#486562,#486570,#486572,.T.); +#486570 = VERTEX_POINT('',#486571); +#486571 = CARTESIAN_POINT('',(143.605,-153.07,1.56)); +#486572 = CIRCLE('',#486573,0.135001418495); +#486573 = AXIS2_PLACEMENT_3D('',#486574,#486575,#486576); +#486574 = CARTESIAN_POINT('',(143.60500141848,-152.9349985815,1.56)); +#486575 = DIRECTION('',(0.,0.,1.)); +#486576 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#486577 = ORIENTED_EDGE('',*,*,#486578,.T.); +#486578 = EDGE_CURVE('',#486570,#486579,#486581,.T.); +#486579 = VERTEX_POINT('',#486580); +#486580 = CARTESIAN_POINT('',(143.875,-153.07,1.56)); +#486581 = LINE('',#486582,#486583); +#486582 = CARTESIAN_POINT('',(143.605,-153.07,1.56)); +#486583 = VECTOR('',#486584,1.); +#486584 = DIRECTION('',(1.,0.,0.)); +#486585 = ORIENTED_EDGE('',*,*,#486586,.T.); +#486586 = EDGE_CURVE('',#486579,#486587,#486589,.T.); +#486587 = VERTEX_POINT('',#486588); +#486588 = CARTESIAN_POINT('',(144.01,-152.935,1.56)); +#486589 = CIRCLE('',#486590,0.135001418495); +#486590 = AXIS2_PLACEMENT_3D('',#486591,#486592,#486593); +#486591 = CARTESIAN_POINT('',(143.87499858151,-152.9349985815,1.56)); +#486592 = DIRECTION('',(0.,0.,1.)); +#486593 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#486594 = ORIENTED_EDGE('',*,*,#486595,.T.); +#486595 = EDGE_CURVE('',#486587,#486534,#486596,.T.); +#486596 = LINE('',#486597,#486598); +#486597 = CARTESIAN_POINT('',(144.01,-152.935,1.56)); +#486598 = VECTOR('',#486599,1.); +#486599 = DIRECTION('',(0.,1.,0.)); +#486600 = FACE_BOUND('',#486601,.F.); +#486601 = EDGE_LOOP('',(#486602,#486613,#486621,#486630,#486638,#486647, + #486655,#486664)); +#486602 = ORIENTED_EDGE('',*,*,#486603,.T.); +#486603 = EDGE_CURVE('',#486604,#486606,#486608,.T.); +#486604 = VERTEX_POINT('',#486605); +#486605 = CARTESIAN_POINT('',(145.03,-152.565,1.56)); +#486606 = VERTEX_POINT('',#486607); +#486607 = CARTESIAN_POINT('',(144.895,-152.43,1.56)); +#486608 = CIRCLE('',#486609,0.135001418495); +#486609 = AXIS2_PLACEMENT_3D('',#486610,#486611,#486612); +#486610 = CARTESIAN_POINT('',(144.89499858151,-152.5650014184,1.56)); +#486611 = DIRECTION('',(0.,0.,1.)); +#486612 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#486613 = ORIENTED_EDGE('',*,*,#486614,.T.); +#486614 = EDGE_CURVE('',#486606,#486615,#486617,.T.); +#486615 = VERTEX_POINT('',#486616); +#486616 = CARTESIAN_POINT('',(144.625,-152.43,1.56)); +#486617 = LINE('',#486618,#486619); +#486618 = CARTESIAN_POINT('',(144.895,-152.43,1.56)); +#486619 = VECTOR('',#486620,1.); +#486620 = DIRECTION('',(-1.,0.,0.)); +#486621 = ORIENTED_EDGE('',*,*,#486622,.T.); +#486622 = EDGE_CURVE('',#486615,#486623,#486625,.T.); +#486623 = VERTEX_POINT('',#486624); +#486624 = CARTESIAN_POINT('',(144.49,-152.565,1.56)); +#486625 = CIRCLE('',#486626,0.135001418495); +#486626 = AXIS2_PLACEMENT_3D('',#486627,#486628,#486629); +#486627 = CARTESIAN_POINT('',(144.62500141848,-152.5650014184,1.56)); +#486628 = DIRECTION('',(0.,0.,1.)); +#486629 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#486630 = ORIENTED_EDGE('',*,*,#486631,.T.); +#486631 = EDGE_CURVE('',#486623,#486632,#486634,.T.); +#486632 = VERTEX_POINT('',#486633); +#486633 = CARTESIAN_POINT('',(144.49,-152.935,1.56)); +#486634 = LINE('',#486635,#486636); +#486635 = CARTESIAN_POINT('',(144.49,-152.565,1.56)); +#486636 = VECTOR('',#486637,1.); +#486637 = DIRECTION('',(0.,-1.,0.)); +#486638 = ORIENTED_EDGE('',*,*,#486639,.T.); +#486639 = EDGE_CURVE('',#486632,#486640,#486642,.T.); +#486640 = VERTEX_POINT('',#486641); +#486641 = CARTESIAN_POINT('',(144.625,-153.07,1.56)); +#486642 = CIRCLE('',#486643,0.135001418495); +#486643 = AXIS2_PLACEMENT_3D('',#486644,#486645,#486646); +#486644 = CARTESIAN_POINT('',(144.62500141848,-152.9349985815,1.56)); +#486645 = DIRECTION('',(0.,0.,1.)); +#486646 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#486647 = ORIENTED_EDGE('',*,*,#486648,.T.); +#486648 = EDGE_CURVE('',#486640,#486649,#486651,.T.); +#486649 = VERTEX_POINT('',#486650); +#486650 = CARTESIAN_POINT('',(144.895,-153.07,1.56)); +#486651 = LINE('',#486652,#486653); +#486652 = CARTESIAN_POINT('',(144.625,-153.07,1.56)); +#486653 = VECTOR('',#486654,1.); +#486654 = DIRECTION('',(1.,0.,0.)); +#486655 = ORIENTED_EDGE('',*,*,#486656,.T.); +#486656 = EDGE_CURVE('',#486649,#486657,#486659,.T.); +#486657 = VERTEX_POINT('',#486658); +#486658 = CARTESIAN_POINT('',(145.03,-152.935,1.56)); +#486659 = CIRCLE('',#486660,0.135001418495); +#486660 = AXIS2_PLACEMENT_3D('',#486661,#486662,#486663); +#486661 = CARTESIAN_POINT('',(144.89499858151,-152.9349985815,1.56)); +#486662 = DIRECTION('',(0.,0.,1.)); +#486663 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#486664 = ORIENTED_EDGE('',*,*,#486665,.T.); +#486665 = EDGE_CURVE('',#486657,#486604,#486666,.T.); +#486666 = LINE('',#486667,#486668); +#486667 = CARTESIAN_POINT('',(145.03,-152.935,1.56)); +#486668 = VECTOR('',#486669,1.); +#486669 = DIRECTION('',(0.,1.,0.)); +#486670 = FACE_BOUND('',#486671,.F.); +#486671 = EDGE_LOOP('',(#486672,#486683,#486691,#486700,#486708,#486717, + #486725,#486734)); +#486672 = ORIENTED_EDGE('',*,*,#486673,.T.); +#486673 = EDGE_CURVE('',#486674,#486676,#486678,.T.); +#486674 = VERTEX_POINT('',#486675); +#486675 = CARTESIAN_POINT('',(150.81,-152.13,1.56)); +#486676 = VERTEX_POINT('',#486677); +#486677 = CARTESIAN_POINT('',(150.67,-151.99,1.56)); +#486678 = CIRCLE('',#486679,0.139999827125); +#486679 = AXIS2_PLACEMENT_3D('',#486680,#486681,#486682); +#486680 = CARTESIAN_POINT('',(150.67000017287,-152.1299998271,1.56)); +#486681 = DIRECTION('',(0.,0.,1.)); +#486682 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#486683 = ORIENTED_EDGE('',*,*,#486684,.T.); +#486684 = EDGE_CURVE('',#486676,#486685,#486687,.T.); +#486685 = VERTEX_POINT('',#486686); +#486686 = CARTESIAN_POINT('',(150.33,-151.99,1.56)); +#486687 = LINE('',#486688,#486689); +#486688 = CARTESIAN_POINT('',(150.67,-151.99,1.56)); +#486689 = VECTOR('',#486690,1.); +#486690 = DIRECTION('',(-1.,0.,0.)); +#486691 = ORIENTED_EDGE('',*,*,#486692,.T.); +#486692 = EDGE_CURVE('',#486685,#486693,#486695,.T.); +#486693 = VERTEX_POINT('',#486694); +#486694 = CARTESIAN_POINT('',(150.19,-152.13,1.56)); +#486695 = CIRCLE('',#486696,0.139999827125); +#486696 = AXIS2_PLACEMENT_3D('',#486697,#486698,#486699); +#486697 = CARTESIAN_POINT('',(150.32999982712,-152.1299998271,1.56)); +#486698 = DIRECTION('',(0.,0.,1.)); +#486699 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#486700 = ORIENTED_EDGE('',*,*,#486701,.T.); +#486701 = EDGE_CURVE('',#486693,#486702,#486704,.T.); +#486702 = VERTEX_POINT('',#486703); +#486703 = CARTESIAN_POINT('',(150.19,-152.41,1.56)); +#486704 = LINE('',#486705,#486706); +#486705 = CARTESIAN_POINT('',(150.19,-152.13,1.56)); +#486706 = VECTOR('',#486707,1.); +#486707 = DIRECTION('',(0.,-1.,0.)); +#486708 = ORIENTED_EDGE('',*,*,#486709,.T.); +#486709 = EDGE_CURVE('',#486702,#486710,#486712,.T.); +#486710 = VERTEX_POINT('',#486711); +#486711 = CARTESIAN_POINT('',(150.33,-152.55,1.56)); +#486712 = CIRCLE('',#486713,0.139999827125); +#486713 = AXIS2_PLACEMENT_3D('',#486714,#486715,#486716); +#486714 = CARTESIAN_POINT('',(150.32999982712,-152.4100001728,1.56)); +#486715 = DIRECTION('',(0.,0.,1.)); +#486716 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#486717 = ORIENTED_EDGE('',*,*,#486718,.T.); +#486718 = EDGE_CURVE('',#486710,#486719,#486721,.T.); +#486719 = VERTEX_POINT('',#486720); +#486720 = CARTESIAN_POINT('',(150.67,-152.55,1.56)); +#486721 = LINE('',#486722,#486723); +#486722 = CARTESIAN_POINT('',(150.33,-152.55,1.56)); +#486723 = VECTOR('',#486724,1.); +#486724 = DIRECTION('',(1.,0.,0.)); +#486725 = ORIENTED_EDGE('',*,*,#486726,.T.); +#486726 = EDGE_CURVE('',#486719,#486727,#486729,.T.); +#486727 = VERTEX_POINT('',#486728); +#486728 = CARTESIAN_POINT('',(150.81,-152.41,1.56)); +#486729 = CIRCLE('',#486730,0.139999827125); +#486730 = AXIS2_PLACEMENT_3D('',#486731,#486732,#486733); +#486731 = CARTESIAN_POINT('',(150.67000017287,-152.4100001728,1.56)); +#486732 = DIRECTION('',(0.,0.,1.)); +#486733 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#486734 = ORIENTED_EDGE('',*,*,#486735,.T.); +#486735 = EDGE_CURVE('',#486727,#486674,#486736,.T.); +#486736 = LINE('',#486737,#486738); +#486737 = CARTESIAN_POINT('',(150.81,-152.41,1.56)); +#486738 = VECTOR('',#486739,1.); +#486739 = DIRECTION('',(0.,1.,0.)); +#486740 = FACE_BOUND('',#486741,.F.); +#486741 = EDGE_LOOP('',(#486742,#486753,#486761,#486770,#486778,#486787, + #486795,#486804)); +#486742 = ORIENTED_EDGE('',*,*,#486743,.T.); +#486743 = EDGE_CURVE('',#486744,#486746,#486748,.T.); +#486744 = VERTEX_POINT('',#486745); +#486745 = CARTESIAN_POINT('',(148.57,-152.105,1.56)); +#486746 = VERTEX_POINT('',#486747); +#486747 = CARTESIAN_POINT('',(148.435,-151.97,1.56)); +#486748 = CIRCLE('',#486749,0.135001418495); +#486749 = AXIS2_PLACEMENT_3D('',#486750,#486751,#486752); +#486750 = CARTESIAN_POINT('',(148.43499858151,-152.1050014184,1.56)); +#486751 = DIRECTION('',(0.,0.,1.)); +#486752 = DIRECTION('',(0.999999999945,1.050720672682E-05,-0.)); +#486753 = ORIENTED_EDGE('',*,*,#486754,.T.); +#486754 = EDGE_CURVE('',#486746,#486755,#486757,.T.); +#486755 = VERTEX_POINT('',#486756); +#486756 = CARTESIAN_POINT('',(148.065,-151.97,1.56)); +#486757 = LINE('',#486758,#486759); +#486758 = CARTESIAN_POINT('',(148.435,-151.97,1.56)); +#486759 = VECTOR('',#486760,1.); +#486760 = DIRECTION('',(-1.,0.,0.)); +#486761 = ORIENTED_EDGE('',*,*,#486762,.T.); +#486762 = EDGE_CURVE('',#486755,#486763,#486765,.T.); +#486763 = VERTEX_POINT('',#486764); +#486764 = CARTESIAN_POINT('',(147.93,-152.105,1.56)); +#486765 = CIRCLE('',#486766,0.135001418495); +#486766 = AXIS2_PLACEMENT_3D('',#486767,#486768,#486769); +#486767 = CARTESIAN_POINT('',(148.06500141848,-152.1050014184,1.56)); +#486768 = DIRECTION('',(0.,0.,1.)); +#486769 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#486770 = ORIENTED_EDGE('',*,*,#486771,.T.); +#486771 = EDGE_CURVE('',#486763,#486772,#486774,.T.); +#486772 = VERTEX_POINT('',#486773); +#486773 = CARTESIAN_POINT('',(147.93,-152.375,1.56)); +#486774 = LINE('',#486775,#486776); +#486775 = CARTESIAN_POINT('',(147.93,-152.105,1.56)); +#486776 = VECTOR('',#486777,1.); +#486777 = DIRECTION('',(0.,-1.,0.)); +#486778 = ORIENTED_EDGE('',*,*,#486779,.T.); +#486779 = EDGE_CURVE('',#486772,#486780,#486782,.T.); +#486780 = VERTEX_POINT('',#486781); +#486781 = CARTESIAN_POINT('',(148.065,-152.51,1.56)); +#486782 = CIRCLE('',#486783,0.135001418495); +#486783 = AXIS2_PLACEMENT_3D('',#486784,#486785,#486786); +#486784 = CARTESIAN_POINT('',(148.06500141848,-152.3749985815,1.56)); +#486785 = DIRECTION('',(0.,0.,1.)); +#486786 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#486787 = ORIENTED_EDGE('',*,*,#486788,.T.); +#486788 = EDGE_CURVE('',#486780,#486789,#486791,.T.); +#486789 = VERTEX_POINT('',#486790); +#486790 = CARTESIAN_POINT('',(148.435,-152.51,1.56)); +#486791 = LINE('',#486792,#486793); +#486792 = CARTESIAN_POINT('',(148.065,-152.51,1.56)); +#486793 = VECTOR('',#486794,1.); +#486794 = DIRECTION('',(1.,0.,0.)); +#486795 = ORIENTED_EDGE('',*,*,#486796,.T.); +#486796 = EDGE_CURVE('',#486789,#486797,#486799,.T.); +#486797 = VERTEX_POINT('',#486798); +#486798 = CARTESIAN_POINT('',(148.57,-152.375,1.56)); +#486799 = CIRCLE('',#486800,0.135001418495); +#486800 = AXIS2_PLACEMENT_3D('',#486801,#486802,#486803); +#486801 = CARTESIAN_POINT('',(148.43499858151,-152.3749985815,1.56)); +#486802 = DIRECTION('',(0.,0.,1.)); +#486803 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#486804 = ORIENTED_EDGE('',*,*,#486805,.T.); +#486805 = EDGE_CURVE('',#486797,#486744,#486806,.T.); +#486806 = LINE('',#486807,#486808); +#486807 = CARTESIAN_POINT('',(148.57,-152.375,1.56)); +#486808 = VECTOR('',#486809,1.); +#486809 = DIRECTION('',(0.,1.,0.)); +#486810 = FACE_BOUND('',#486811,.F.); +#486811 = EDGE_LOOP('',(#486812,#486823,#486831,#486840,#486848,#486857, + #486865,#486874)); +#486812 = ORIENTED_EDGE('',*,*,#486813,.T.); +#486813 = EDGE_CURVE('',#486814,#486816,#486818,.T.); +#486814 = VERTEX_POINT('',#486815); +#486815 = CARTESIAN_POINT('',(152.15,-150.2,1.56)); +#486816 = VERTEX_POINT('',#486817); +#486817 = CARTESIAN_POINT('',(151.9,-149.95,1.56)); +#486818 = CIRCLE('',#486819,0.249998959685); +#486819 = AXIS2_PLACEMENT_3D('',#486820,#486821,#486822); +#486820 = CARTESIAN_POINT('',(151.90000104031,-150.1999989596,1.56)); +#486821 = DIRECTION('',(0.,0.,1.)); +#486822 = DIRECTION('',(0.999999999991,-4.161285723378E-06,0.)); +#486823 = ORIENTED_EDGE('',*,*,#486824,.T.); +#486824 = EDGE_CURVE('',#486816,#486825,#486827,.T.); +#486825 = VERTEX_POINT('',#486826); +#486826 = CARTESIAN_POINT('',(151.4,-149.95,1.56)); +#486827 = LINE('',#486828,#486829); +#486828 = CARTESIAN_POINT('',(151.9,-149.95,1.56)); +#486829 = VECTOR('',#486830,1.); +#486830 = DIRECTION('',(-1.,0.,0.)); +#486831 = ORIENTED_EDGE('',*,*,#486832,.T.); +#486832 = EDGE_CURVE('',#486825,#486833,#486835,.T.); +#486833 = VERTEX_POINT('',#486834); +#486834 = CARTESIAN_POINT('',(151.15,-150.2,1.56)); +#486835 = CIRCLE('',#486836,0.249998959685); +#486836 = AXIS2_PLACEMENT_3D('',#486837,#486838,#486839); +#486837 = CARTESIAN_POINT('',(151.39999895968,-150.1999989596,1.56)); +#486838 = DIRECTION('',(0.,0.,1.)); +#486839 = DIRECTION('',(4.161285837067E-06,0.999999999991,-0.)); +#486840 = ORIENTED_EDGE('',*,*,#486841,.T.); +#486841 = EDGE_CURVE('',#486833,#486842,#486844,.T.); +#486842 = VERTEX_POINT('',#486843); +#486843 = CARTESIAN_POINT('',(151.15,-151.15,1.56)); +#486844 = LINE('',#486845,#486846); +#486845 = CARTESIAN_POINT('',(151.15,-150.2,1.56)); +#486846 = VECTOR('',#486847,1.); +#486847 = DIRECTION('',(0.,-1.,0.)); +#486848 = ORIENTED_EDGE('',*,*,#486849,.T.); +#486849 = EDGE_CURVE('',#486842,#486850,#486852,.T.); +#486850 = VERTEX_POINT('',#486851); +#486851 = CARTESIAN_POINT('',(151.4,-151.4,1.56)); +#486852 = CIRCLE('',#486853,0.249998959685); +#486853 = AXIS2_PLACEMENT_3D('',#486854,#486855,#486856); +#486854 = CARTESIAN_POINT('',(151.39999895968,-151.1500010403,1.56)); +#486855 = DIRECTION('',(0.,0.,1.)); +#486856 = DIRECTION('',(-0.999999999991,4.161285837066E-06,0.)); +#486857 = ORIENTED_EDGE('',*,*,#486858,.T.); +#486858 = EDGE_CURVE('',#486850,#486859,#486861,.T.); +#486859 = VERTEX_POINT('',#486860); +#486860 = CARTESIAN_POINT('',(151.9,-151.4,1.56)); +#486861 = LINE('',#486862,#486863); +#486862 = CARTESIAN_POINT('',(151.4,-151.4,1.56)); +#486863 = VECTOR('',#486864,1.); +#486864 = DIRECTION('',(1.,0.,0.)); +#486865 = ORIENTED_EDGE('',*,*,#486866,.T.); +#486866 = EDGE_CURVE('',#486859,#486867,#486869,.T.); +#486867 = VERTEX_POINT('',#486868); +#486868 = CARTESIAN_POINT('',(152.15,-151.15,1.56)); +#486869 = CIRCLE('',#486870,0.249998959685); +#486870 = AXIS2_PLACEMENT_3D('',#486871,#486872,#486873); +#486871 = CARTESIAN_POINT('',(151.90000104031,-151.1500010403,1.56)); +#486872 = DIRECTION('',(0.,0.,1.)); +#486873 = DIRECTION('',(-4.161285609691E-06,-0.999999999991,0.)); +#486874 = ORIENTED_EDGE('',*,*,#486875,.T.); +#486875 = EDGE_CURVE('',#486867,#486814,#486876,.T.); +#486876 = LINE('',#486877,#486878); +#486877 = CARTESIAN_POINT('',(152.15,-151.15,1.56)); +#486878 = VECTOR('',#486879,1.); +#486879 = DIRECTION('',(0.,1.,0.)); +#486880 = FACE_BOUND('',#486881,.F.); +#486881 = EDGE_LOOP('',(#486882,#486893,#486901,#486910,#486918,#486927, + #486935,#486944)); +#486882 = ORIENTED_EDGE('',*,*,#486883,.T.); +#486883 = EDGE_CURVE('',#486884,#486886,#486888,.T.); +#486884 = VERTEX_POINT('',#486885); +#486885 = CARTESIAN_POINT('',(153.85,-150.2,1.56)); +#486886 = VERTEX_POINT('',#486887); +#486887 = CARTESIAN_POINT('',(153.6,-149.95,1.56)); +#486888 = CIRCLE('',#486889,0.249998959685); +#486889 = AXIS2_PLACEMENT_3D('',#486890,#486891,#486892); +#486890 = CARTESIAN_POINT('',(153.60000104031,-150.1999989596,1.56)); +#486891 = DIRECTION('',(0.,0.,1.)); +#486892 = DIRECTION('',(0.999999999991,-4.161285950754E-06,0.)); +#486893 = ORIENTED_EDGE('',*,*,#486894,.T.); +#486894 = EDGE_CURVE('',#486886,#486895,#486897,.T.); +#486895 = VERTEX_POINT('',#486896); +#486896 = CARTESIAN_POINT('',(153.1,-149.95,1.56)); +#486897 = LINE('',#486898,#486899); +#486898 = CARTESIAN_POINT('',(153.6,-149.95,1.56)); +#486899 = VECTOR('',#486900,1.); +#486900 = DIRECTION('',(-1.,0.,0.)); +#486901 = ORIENTED_EDGE('',*,*,#486902,.T.); +#486902 = EDGE_CURVE('',#486895,#486903,#486905,.T.); +#486903 = VERTEX_POINT('',#486904); +#486904 = CARTESIAN_POINT('',(152.85,-150.2,1.56)); +#486905 = CIRCLE('',#486906,0.249998959685); +#486906 = AXIS2_PLACEMENT_3D('',#486907,#486908,#486909); +#486907 = CARTESIAN_POINT('',(153.09999895968,-150.1999989596,1.56)); +#486908 = DIRECTION('',(0.,0.,1.)); +#486909 = DIRECTION('',(4.161285609691E-06,0.999999999991,-0.)); +#486910 = ORIENTED_EDGE('',*,*,#486911,.T.); +#486911 = EDGE_CURVE('',#486903,#486912,#486914,.T.); +#486912 = VERTEX_POINT('',#486913); +#486913 = CARTESIAN_POINT('',(152.85,-151.15,1.56)); +#486914 = LINE('',#486915,#486916); +#486915 = CARTESIAN_POINT('',(152.85,-150.2,1.56)); +#486916 = VECTOR('',#486917,1.); +#486917 = DIRECTION('',(0.,-1.,0.)); +#486918 = ORIENTED_EDGE('',*,*,#486919,.T.); +#486919 = EDGE_CURVE('',#486912,#486920,#486922,.T.); +#486920 = VERTEX_POINT('',#486921); +#486921 = CARTESIAN_POINT('',(153.1,-151.4,1.56)); +#486922 = CIRCLE('',#486923,0.249998959685); +#486923 = AXIS2_PLACEMENT_3D('',#486924,#486925,#486926); +#486924 = CARTESIAN_POINT('',(153.09999895968,-151.1500010403,1.56)); +#486925 = DIRECTION('',(0.,0.,1.)); +#486926 = DIRECTION('',(-0.999999999991,4.161285609691E-06,0.)); +#486927 = ORIENTED_EDGE('',*,*,#486928,.T.); +#486928 = EDGE_CURVE('',#486920,#486929,#486931,.T.); +#486929 = VERTEX_POINT('',#486930); +#486930 = CARTESIAN_POINT('',(153.6,-151.4,1.56)); +#486931 = LINE('',#486932,#486933); +#486932 = CARTESIAN_POINT('',(153.1,-151.4,1.56)); +#486933 = VECTOR('',#486934,1.); +#486934 = DIRECTION('',(1.,0.,0.)); +#486935 = ORIENTED_EDGE('',*,*,#486936,.T.); +#486936 = EDGE_CURVE('',#486929,#486937,#486939,.T.); +#486937 = VERTEX_POINT('',#486938); +#486938 = CARTESIAN_POINT('',(153.85,-151.15,1.56)); +#486939 = CIRCLE('',#486940,0.249998959685); +#486940 = AXIS2_PLACEMENT_3D('',#486941,#486942,#486943); +#486941 = CARTESIAN_POINT('',(153.60000104031,-151.1500010403,1.56)); +#486942 = DIRECTION('',(0.,0.,1.)); +#486943 = DIRECTION('',(-4.161285837066E-06,-0.999999999991,0.)); +#486944 = ORIENTED_EDGE('',*,*,#486945,.T.); +#486945 = EDGE_CURVE('',#486937,#486884,#486946,.T.); +#486946 = LINE('',#486947,#486948); +#486947 = CARTESIAN_POINT('',(153.85,-151.15,1.56)); +#486948 = VECTOR('',#486949,1.); +#486949 = DIRECTION('',(0.,1.,0.)); +#486950 = FACE_BOUND('',#486951,.F.); +#486951 = EDGE_LOOP('',(#486952)); +#486952 = ORIENTED_EDGE('',*,*,#486953,.T.); +#486953 = EDGE_CURVE('',#486954,#486954,#486956,.T.); +#486954 = VERTEX_POINT('',#486955); +#486955 = CARTESIAN_POINT('',(147.999999,-150.1,1.56)); +#486956 = CIRCLE('',#486957,0.999999); +#486957 = AXIS2_PLACEMENT_3D('',#486958,#486959,#486960); +#486958 = CARTESIAN_POINT('',(147.,-150.1,1.56)); +#486959 = DIRECTION('',(0.,0.,1.)); +#486960 = DIRECTION('',(1.,0.,-0.)); +#486961 = FACE_BOUND('',#486962,.F.); +#486962 = EDGE_LOOP('',(#486963)); +#486963 = ORIENTED_EDGE('',*,*,#486964,.T.); +#486964 = EDGE_CURVE('',#486965,#486965,#486967,.T.); +#486965 = VERTEX_POINT('',#486966); +#486966 = CARTESIAN_POINT('',(124.7155,-149.5,1.56)); +#486967 = CIRCLE('',#486968,0.7155); +#486968 = AXIS2_PLACEMENT_3D('',#486969,#486970,#486971); +#486969 = CARTESIAN_POINT('',(124.,-149.5,1.56)); +#486970 = DIRECTION('',(0.,0.,1.)); +#486971 = DIRECTION('',(1.,0.,-0.)); +#486972 = FACE_BOUND('',#486973,.F.); +#486973 = EDGE_LOOP('',(#486974)); +#486974 = ORIENTED_EDGE('',*,*,#486975,.T.); +#486975 = EDGE_CURVE('',#486976,#486976,#486978,.T.); +#486976 = VERTEX_POINT('',#486977); +#486977 = CARTESIAN_POINT('',(126.7155,-149.5,1.56)); +#486978 = CIRCLE('',#486979,0.7155); +#486979 = AXIS2_PLACEMENT_3D('',#486980,#486981,#486982); +#486980 = CARTESIAN_POINT('',(126.,-149.5,1.56)); +#486981 = DIRECTION('',(0.,0.,1.)); +#486982 = DIRECTION('',(1.,0.,-0.)); +#486983 = FACE_BOUND('',#486984,.F.); +#486984 = EDGE_LOOP('',(#486985)); +#486985 = ORIENTED_EDGE('',*,*,#486986,.T.); +#486986 = EDGE_CURVE('',#486987,#486987,#486989,.T.); +#486987 = VERTEX_POINT('',#486988); +#486988 = CARTESIAN_POINT('',(128.7155,-149.5,1.56)); +#486989 = CIRCLE('',#486990,0.7155); +#486990 = AXIS2_PLACEMENT_3D('',#486991,#486992,#486993); +#486991 = CARTESIAN_POINT('',(128.,-149.5,1.56)); +#486992 = DIRECTION('',(0.,0.,1.)); +#486993 = DIRECTION('',(1.,0.,-0.)); +#486994 = FACE_BOUND('',#486995,.F.); +#486995 = EDGE_LOOP('',(#486996)); +#486996 = ORIENTED_EDGE('',*,*,#486997,.T.); +#486997 = EDGE_CURVE('',#486998,#486998,#487000,.T.); +#486998 = VERTEX_POINT('',#486999); +#486999 = CARTESIAN_POINT('',(130.7155,-149.5,1.56)); +#487000 = CIRCLE('',#487001,0.7155); +#487001 = AXIS2_PLACEMENT_3D('',#487002,#487003,#487004); +#487002 = CARTESIAN_POINT('',(130.,-149.5,1.56)); +#487003 = DIRECTION('',(0.,0.,1.)); +#487004 = DIRECTION('',(1.,0.,-0.)); +#487005 = FACE_BOUND('',#487006,.F.); +#487006 = EDGE_LOOP('',(#487007)); +#487007 = ORIENTED_EDGE('',*,*,#487008,.T.); +#487008 = EDGE_CURVE('',#487009,#487009,#487011,.T.); +#487009 = VERTEX_POINT('',#487010); +#487010 = CARTESIAN_POINT('',(132.7155,-149.5,1.56)); +#487011 = CIRCLE('',#487012,0.7155); +#487012 = AXIS2_PLACEMENT_3D('',#487013,#487014,#487015); +#487013 = CARTESIAN_POINT('',(132.,-149.5,1.56)); +#487014 = DIRECTION('',(0.,0.,1.)); +#487015 = DIRECTION('',(1.,0.,-0.)); +#487016 = FACE_BOUND('',#487017,.F.); +#487017 = EDGE_LOOP('',(#487018)); +#487018 = ORIENTED_EDGE('',*,*,#487019,.T.); +#487019 = EDGE_CURVE('',#487020,#487020,#487022,.T.); +#487020 = VERTEX_POINT('',#487021); +#487021 = CARTESIAN_POINT('',(134.7155,-149.5,1.56)); +#487022 = CIRCLE('',#487023,0.7155); +#487023 = AXIS2_PLACEMENT_3D('',#487024,#487025,#487026); +#487024 = CARTESIAN_POINT('',(134.,-149.5,1.56)); +#487025 = DIRECTION('',(0.,0.,1.)); +#487026 = DIRECTION('',(1.,0.,-0.)); +#487027 = FACE_BOUND('',#487028,.F.); +#487028 = EDGE_LOOP('',(#487029)); +#487029 = ORIENTED_EDGE('',*,*,#487030,.T.); +#487030 = EDGE_CURVE('',#487031,#487031,#487033,.T.); +#487031 = VERTEX_POINT('',#487032); +#487032 = CARTESIAN_POINT('',(136.7155,-149.5,1.56)); +#487033 = CIRCLE('',#487034,0.7155); +#487034 = AXIS2_PLACEMENT_3D('',#487035,#487036,#487037); +#487035 = CARTESIAN_POINT('',(136.,-149.5,1.56)); +#487036 = DIRECTION('',(0.,0.,1.)); +#487037 = DIRECTION('',(1.,0.,-0.)); +#487038 = FACE_BOUND('',#487039,.F.); +#487039 = EDGE_LOOP('',(#487040)); +#487040 = ORIENTED_EDGE('',*,*,#487041,.T.); +#487041 = EDGE_CURVE('',#487042,#487042,#487044,.T.); +#487042 = VERTEX_POINT('',#487043); +#487043 = CARTESIAN_POINT('',(138.7155,-149.5,1.56)); +#487044 = CIRCLE('',#487045,0.7155); +#487045 = AXIS2_PLACEMENT_3D('',#487046,#487047,#487048); +#487046 = CARTESIAN_POINT('',(138.,-149.5,1.56)); +#487047 = DIRECTION('',(0.,0.,1.)); +#487048 = DIRECTION('',(1.,0.,-0.)); +#487049 = FACE_BOUND('',#487050,.F.); +#487050 = EDGE_LOOP('',(#487051)); +#487051 = ORIENTED_EDGE('',*,*,#487052,.T.); +#487052 = EDGE_CURVE('',#487053,#487053,#487055,.T.); +#487053 = VERTEX_POINT('',#487054); +#487054 = CARTESIAN_POINT('',(140.7155,-149.5,1.56)); +#487055 = CIRCLE('',#487056,0.7155); +#487056 = AXIS2_PLACEMENT_3D('',#487057,#487058,#487059); +#487057 = CARTESIAN_POINT('',(140.,-149.5,1.56)); +#487058 = DIRECTION('',(0.,0.,1.)); +#487059 = DIRECTION('',(1.,0.,-0.)); +#487060 = FACE_BOUND('',#487061,.F.); +#487061 = EDGE_LOOP('',(#487062)); +#487062 = ORIENTED_EDGE('',*,*,#487063,.T.); +#487063 = EDGE_CURVE('',#487064,#487064,#487066,.T.); +#487064 = VERTEX_POINT('',#487065); +#487065 = CARTESIAN_POINT('',(142.7155,-149.5,1.56)); +#487066 = CIRCLE('',#487067,0.7155); +#487067 = AXIS2_PLACEMENT_3D('',#487068,#487069,#487070); +#487068 = CARTESIAN_POINT('',(142.,-149.5,1.56)); +#487069 = DIRECTION('',(0.,0.,1.)); +#487070 = DIRECTION('',(1.,0.,-0.)); +#487071 = FACE_BOUND('',#487072,.F.); +#487072 = EDGE_LOOP('',(#487073,#487084,#487092,#487101,#487109,#487118, + #487126,#487135)); +#487073 = ORIENTED_EDGE('',*,*,#487074,.T.); +#487074 = EDGE_CURVE('',#487075,#487077,#487079,.T.); +#487075 = VERTEX_POINT('',#487076); +#487076 = CARTESIAN_POINT('',(139.92,-147.665,1.56)); +#487077 = VERTEX_POINT('',#487078); +#487078 = CARTESIAN_POINT('',(139.785,-147.53,1.56)); +#487079 = CIRCLE('',#487080,0.135001418495); +#487080 = AXIS2_PLACEMENT_3D('',#487081,#487082,#487083); +#487081 = CARTESIAN_POINT('',(139.78499858151,-147.6650014184,1.56)); +#487082 = DIRECTION('',(0.,0.,1.)); +#487083 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#487084 = ORIENTED_EDGE('',*,*,#487085,.T.); +#487085 = EDGE_CURVE('',#487077,#487086,#487088,.T.); +#487086 = VERTEX_POINT('',#487087); +#487087 = CARTESIAN_POINT('',(139.415,-147.53,1.56)); +#487088 = LINE('',#487089,#487090); +#487089 = CARTESIAN_POINT('',(139.785,-147.53,1.56)); +#487090 = VECTOR('',#487091,1.); +#487091 = DIRECTION('',(-1.,0.,0.)); +#487092 = ORIENTED_EDGE('',*,*,#487093,.T.); +#487093 = EDGE_CURVE('',#487086,#487094,#487096,.T.); +#487094 = VERTEX_POINT('',#487095); +#487095 = CARTESIAN_POINT('',(139.28,-147.665,1.56)); +#487096 = CIRCLE('',#487097,0.135001418495); +#487097 = AXIS2_PLACEMENT_3D('',#487098,#487099,#487100); +#487098 = CARTESIAN_POINT('',(139.41500141848,-147.6650014184,1.56)); +#487099 = DIRECTION('',(0.,0.,1.)); +#487100 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#487101 = ORIENTED_EDGE('',*,*,#487102,.T.); +#487102 = EDGE_CURVE('',#487094,#487103,#487105,.T.); +#487103 = VERTEX_POINT('',#487104); +#487104 = CARTESIAN_POINT('',(139.28,-147.935,1.56)); +#487105 = LINE('',#487106,#487107); +#487106 = CARTESIAN_POINT('',(139.28,-147.665,1.56)); +#487107 = VECTOR('',#487108,1.); +#487108 = DIRECTION('',(0.,-1.,0.)); +#487109 = ORIENTED_EDGE('',*,*,#487110,.T.); +#487110 = EDGE_CURVE('',#487103,#487111,#487113,.T.); +#487111 = VERTEX_POINT('',#487112); +#487112 = CARTESIAN_POINT('',(139.415,-148.07,1.56)); +#487113 = CIRCLE('',#487114,0.135001418495); +#487114 = AXIS2_PLACEMENT_3D('',#487115,#487116,#487117); +#487115 = CARTESIAN_POINT('',(139.41500141848,-147.9349985815,1.56)); +#487116 = DIRECTION('',(0.,0.,1.)); +#487117 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#487118 = ORIENTED_EDGE('',*,*,#487119,.T.); +#487119 = EDGE_CURVE('',#487111,#487120,#487122,.T.); +#487120 = VERTEX_POINT('',#487121); +#487121 = CARTESIAN_POINT('',(139.785,-148.07,1.56)); +#487122 = LINE('',#487123,#487124); +#487123 = CARTESIAN_POINT('',(139.415,-148.07,1.56)); +#487124 = VECTOR('',#487125,1.); +#487125 = DIRECTION('',(1.,0.,0.)); +#487126 = ORIENTED_EDGE('',*,*,#487127,.T.); +#487127 = EDGE_CURVE('',#487120,#487128,#487130,.T.); +#487128 = VERTEX_POINT('',#487129); +#487129 = CARTESIAN_POINT('',(139.92,-147.935,1.56)); +#487130 = CIRCLE('',#487131,0.135001418495); +#487131 = AXIS2_PLACEMENT_3D('',#487132,#487133,#487134); +#487132 = CARTESIAN_POINT('',(139.78499858151,-147.9349985815,1.56)); +#487133 = DIRECTION('',(0.,0.,1.)); +#487134 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#487135 = ORIENTED_EDGE('',*,*,#487136,.T.); +#487136 = EDGE_CURVE('',#487128,#487075,#487137,.T.); +#487137 = LINE('',#487138,#487139); +#487138 = CARTESIAN_POINT('',(139.92,-147.935,1.56)); +#487139 = VECTOR('',#487140,1.); +#487140 = DIRECTION('',(0.,1.,0.)); +#487141 = FACE_BOUND('',#487142,.F.); +#487142 = EDGE_LOOP('',(#487143,#487154,#487162,#487171,#487179,#487188, + #487196,#487205)); +#487143 = ORIENTED_EDGE('',*,*,#487144,.T.); +#487144 = EDGE_CURVE('',#487145,#487147,#487149,.T.); +#487145 = VERTEX_POINT('',#487146); +#487146 = CARTESIAN_POINT('',(139.92,-146.645,1.56)); +#487147 = VERTEX_POINT('',#487148); +#487148 = CARTESIAN_POINT('',(139.785,-146.51,1.56)); +#487149 = CIRCLE('',#487150,0.135001418495); +#487150 = AXIS2_PLACEMENT_3D('',#487151,#487152,#487153); +#487151 = CARTESIAN_POINT('',(139.78499858151,-146.6450014184,1.56)); +#487152 = DIRECTION('',(0.,0.,1.)); +#487153 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#487154 = ORIENTED_EDGE('',*,*,#487155,.T.); +#487155 = EDGE_CURVE('',#487147,#487156,#487158,.T.); +#487156 = VERTEX_POINT('',#487157); +#487157 = CARTESIAN_POINT('',(139.415,-146.51,1.56)); +#487158 = LINE('',#487159,#487160); +#487159 = CARTESIAN_POINT('',(139.785,-146.51,1.56)); +#487160 = VECTOR('',#487161,1.); +#487161 = DIRECTION('',(-1.,0.,0.)); +#487162 = ORIENTED_EDGE('',*,*,#487163,.T.); +#487163 = EDGE_CURVE('',#487156,#487164,#487166,.T.); +#487164 = VERTEX_POINT('',#487165); +#487165 = CARTESIAN_POINT('',(139.28,-146.645,1.56)); +#487166 = CIRCLE('',#487167,0.135001418495); +#487167 = AXIS2_PLACEMENT_3D('',#487168,#487169,#487170); +#487168 = CARTESIAN_POINT('',(139.41500141848,-146.6450014184,1.56)); +#487169 = DIRECTION('',(0.,0.,1.)); +#487170 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#487171 = ORIENTED_EDGE('',*,*,#487172,.T.); +#487172 = EDGE_CURVE('',#487164,#487173,#487175,.T.); +#487173 = VERTEX_POINT('',#487174); +#487174 = CARTESIAN_POINT('',(139.28,-146.915,1.56)); +#487175 = LINE('',#487176,#487177); +#487176 = CARTESIAN_POINT('',(139.28,-146.645,1.56)); +#487177 = VECTOR('',#487178,1.); +#487178 = DIRECTION('',(0.,-1.,0.)); +#487179 = ORIENTED_EDGE('',*,*,#487180,.T.); +#487180 = EDGE_CURVE('',#487173,#487181,#487183,.T.); +#487181 = VERTEX_POINT('',#487182); +#487182 = CARTESIAN_POINT('',(139.415,-147.05,1.56)); +#487183 = CIRCLE('',#487184,0.135001418495); +#487184 = AXIS2_PLACEMENT_3D('',#487185,#487186,#487187); +#487185 = CARTESIAN_POINT('',(139.41500141848,-146.9149985815,1.56)); +#487186 = DIRECTION('',(0.,0.,1.)); +#487187 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#487188 = ORIENTED_EDGE('',*,*,#487189,.T.); +#487189 = EDGE_CURVE('',#487181,#487190,#487192,.T.); +#487190 = VERTEX_POINT('',#487191); +#487191 = CARTESIAN_POINT('',(139.785,-147.05,1.56)); +#487192 = LINE('',#487193,#487194); +#487193 = CARTESIAN_POINT('',(139.415,-147.05,1.56)); +#487194 = VECTOR('',#487195,1.); +#487195 = DIRECTION('',(1.,0.,0.)); +#487196 = ORIENTED_EDGE('',*,*,#487197,.T.); +#487197 = EDGE_CURVE('',#487190,#487198,#487200,.T.); +#487198 = VERTEX_POINT('',#487199); +#487199 = CARTESIAN_POINT('',(139.92,-146.915,1.56)); +#487200 = CIRCLE('',#487201,0.135001418495); +#487201 = AXIS2_PLACEMENT_3D('',#487202,#487203,#487204); +#487202 = CARTESIAN_POINT('',(139.78499858151,-146.9149985815,1.56)); +#487203 = DIRECTION('',(0.,0.,1.)); +#487204 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#487205 = ORIENTED_EDGE('',*,*,#487206,.T.); +#487206 = EDGE_CURVE('',#487198,#487145,#487207,.T.); +#487207 = LINE('',#487208,#487209); +#487208 = CARTESIAN_POINT('',(139.92,-146.915,1.56)); +#487209 = VECTOR('',#487210,1.); +#487210 = DIRECTION('',(0.,1.,0.)); +#487211 = FACE_BOUND('',#487212,.F.); +#487212 = EDGE_LOOP('',(#487213,#487224,#487232,#487241,#487249,#487258, + #487266,#487275)); +#487213 = ORIENTED_EDGE('',*,*,#487214,.T.); +#487214 = EDGE_CURVE('',#487215,#487217,#487219,.T.); +#487215 = VERTEX_POINT('',#487216); +#487216 = CARTESIAN_POINT('',(152.15,-145.05,1.56)); +#487217 = VERTEX_POINT('',#487218); +#487218 = CARTESIAN_POINT('',(151.9,-144.8,1.56)); +#487219 = CIRCLE('',#487220,0.249998959685); +#487220 = AXIS2_PLACEMENT_3D('',#487221,#487222,#487223); +#487221 = CARTESIAN_POINT('',(151.90000104031,-145.0499989596,1.56)); +#487222 = DIRECTION('',(0.,0.,1.)); +#487223 = DIRECTION('',(0.999999999991,-4.161285837066E-06,0.)); +#487224 = ORIENTED_EDGE('',*,*,#487225,.T.); +#487225 = EDGE_CURVE('',#487217,#487226,#487228,.T.); +#487226 = VERTEX_POINT('',#487227); +#487227 = CARTESIAN_POINT('',(151.4,-144.8,1.56)); +#487228 = LINE('',#487229,#487230); +#487229 = CARTESIAN_POINT('',(151.9,-144.8,1.56)); +#487230 = VECTOR('',#487231,1.); +#487231 = DIRECTION('',(-1.,0.,0.)); +#487232 = ORIENTED_EDGE('',*,*,#487233,.T.); +#487233 = EDGE_CURVE('',#487226,#487234,#487236,.T.); +#487234 = VERTEX_POINT('',#487235); +#487235 = CARTESIAN_POINT('',(151.15,-145.05,1.56)); +#487236 = CIRCLE('',#487237,0.249998959685); +#487237 = AXIS2_PLACEMENT_3D('',#487238,#487239,#487240); +#487238 = CARTESIAN_POINT('',(151.39999895968,-145.0499989596,1.56)); +#487239 = DIRECTION('',(0.,0.,1.)); +#487240 = DIRECTION('',(4.161286064442E-06,0.999999999991,-0.)); +#487241 = ORIENTED_EDGE('',*,*,#487242,.T.); +#487242 = EDGE_CURVE('',#487234,#487243,#487245,.T.); +#487243 = VERTEX_POINT('',#487244); +#487244 = CARTESIAN_POINT('',(151.15,-146.,1.56)); +#487245 = LINE('',#487246,#487247); +#487246 = CARTESIAN_POINT('',(151.15,-145.05,1.56)); +#487247 = VECTOR('',#487248,1.); +#487248 = DIRECTION('',(0.,-1.,0.)); +#487249 = ORIENTED_EDGE('',*,*,#487250,.T.); +#487250 = EDGE_CURVE('',#487243,#487251,#487253,.T.); +#487251 = VERTEX_POINT('',#487252); +#487252 = CARTESIAN_POINT('',(151.4,-146.25,1.56)); +#487253 = CIRCLE('',#487254,0.249998959685); +#487254 = AXIS2_PLACEMENT_3D('',#487255,#487256,#487257); +#487255 = CARTESIAN_POINT('',(151.39999895968,-146.0000010403,1.56)); +#487256 = DIRECTION('',(0.,0.,1.)); +#487257 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#487258 = ORIENTED_EDGE('',*,*,#487259,.T.); +#487259 = EDGE_CURVE('',#487251,#487260,#487262,.T.); +#487260 = VERTEX_POINT('',#487261); +#487261 = CARTESIAN_POINT('',(151.9,-146.25,1.56)); +#487262 = LINE('',#487263,#487264); +#487263 = CARTESIAN_POINT('',(151.4,-146.25,1.56)); +#487264 = VECTOR('',#487265,1.); +#487265 = DIRECTION('',(1.,0.,0.)); +#487266 = ORIENTED_EDGE('',*,*,#487267,.T.); +#487267 = EDGE_CURVE('',#487260,#487268,#487270,.T.); +#487268 = VERTEX_POINT('',#487269); +#487269 = CARTESIAN_POINT('',(152.15,-146.,1.56)); +#487270 = CIRCLE('',#487271,0.249998959685); +#487271 = AXIS2_PLACEMENT_3D('',#487272,#487273,#487274); +#487272 = CARTESIAN_POINT('',(151.90000104031,-146.0000010403,1.56)); +#487273 = DIRECTION('',(0.,0.,1.)); +#487274 = DIRECTION('',(-4.161285609691E-06,-0.999999999991,0.)); +#487275 = ORIENTED_EDGE('',*,*,#487276,.T.); +#487276 = EDGE_CURVE('',#487268,#487215,#487277,.T.); +#487277 = LINE('',#487278,#487279); +#487278 = CARTESIAN_POINT('',(152.15,-146.,1.56)); +#487279 = VECTOR('',#487280,1.); +#487280 = DIRECTION('',(0.,1.,0.)); +#487281 = FACE_BOUND('',#487282,.F.); +#487282 = EDGE_LOOP('',(#487283,#487294,#487302,#487311,#487319,#487328, + #487336,#487345)); +#487283 = ORIENTED_EDGE('',*,*,#487284,.T.); +#487284 = EDGE_CURVE('',#487285,#487287,#487289,.T.); +#487285 = VERTEX_POINT('',#487286); +#487286 = CARTESIAN_POINT('',(153.85,-145.05,1.56)); +#487287 = VERTEX_POINT('',#487288); +#487288 = CARTESIAN_POINT('',(153.6,-144.8,1.56)); +#487289 = CIRCLE('',#487290,0.249998959685); +#487290 = AXIS2_PLACEMENT_3D('',#487291,#487292,#487293); +#487291 = CARTESIAN_POINT('',(153.60000104031,-145.0499989596,1.56)); +#487292 = DIRECTION('',(0.,0.,1.)); +#487293 = DIRECTION('',(0.999999999991,-4.161286064442E-06,0.)); +#487294 = ORIENTED_EDGE('',*,*,#487295,.T.); +#487295 = EDGE_CURVE('',#487287,#487296,#487298,.T.); +#487296 = VERTEX_POINT('',#487297); +#487297 = CARTESIAN_POINT('',(153.1,-144.8,1.56)); +#487298 = LINE('',#487299,#487300); +#487299 = CARTESIAN_POINT('',(153.6,-144.8,1.56)); +#487300 = VECTOR('',#487301,1.); +#487301 = DIRECTION('',(-1.,0.,0.)); +#487302 = ORIENTED_EDGE('',*,*,#487303,.T.); +#487303 = EDGE_CURVE('',#487296,#487304,#487306,.T.); +#487304 = VERTEX_POINT('',#487305); +#487305 = CARTESIAN_POINT('',(152.85,-145.05,1.56)); +#487306 = CIRCLE('',#487307,0.249998959685); +#487307 = AXIS2_PLACEMENT_3D('',#487308,#487309,#487310); +#487308 = CARTESIAN_POINT('',(153.09999895968,-145.0499989596,1.56)); +#487309 = DIRECTION('',(0.,0.,1.)); +#487310 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#487311 = ORIENTED_EDGE('',*,*,#487312,.T.); +#487312 = EDGE_CURVE('',#487304,#487313,#487315,.T.); +#487313 = VERTEX_POINT('',#487314); +#487314 = CARTESIAN_POINT('',(152.85,-146.,1.56)); +#487315 = LINE('',#487316,#487317); +#487316 = CARTESIAN_POINT('',(152.85,-145.05,1.56)); +#487317 = VECTOR('',#487318,1.); +#487318 = DIRECTION('',(0.,-1.,0.)); +#487319 = ORIENTED_EDGE('',*,*,#487320,.T.); +#487320 = EDGE_CURVE('',#487313,#487321,#487323,.T.); +#487321 = VERTEX_POINT('',#487322); +#487322 = CARTESIAN_POINT('',(153.1,-146.25,1.56)); +#487323 = CIRCLE('',#487324,0.249998959685); +#487324 = AXIS2_PLACEMENT_3D('',#487325,#487326,#487327); +#487325 = CARTESIAN_POINT('',(153.09999895968,-146.0000010403,1.56)); +#487326 = DIRECTION('',(0.,0.,1.)); +#487327 = DIRECTION('',(-0.999999999991,4.161285723378E-06,0.)); +#487328 = ORIENTED_EDGE('',*,*,#487329,.T.); +#487329 = EDGE_CURVE('',#487321,#487330,#487332,.T.); +#487330 = VERTEX_POINT('',#487331); +#487331 = CARTESIAN_POINT('',(153.6,-146.25,1.56)); +#487332 = LINE('',#487333,#487334); +#487333 = CARTESIAN_POINT('',(153.1,-146.25,1.56)); +#487334 = VECTOR('',#487335,1.); +#487335 = DIRECTION('',(1.,0.,0.)); +#487336 = ORIENTED_EDGE('',*,*,#487337,.T.); +#487337 = EDGE_CURVE('',#487330,#487338,#487340,.T.); +#487338 = VERTEX_POINT('',#487339); +#487339 = CARTESIAN_POINT('',(153.85,-146.,1.56)); +#487340 = CIRCLE('',#487341,0.249998959685); +#487341 = AXIS2_PLACEMENT_3D('',#487342,#487343,#487344); +#487342 = CARTESIAN_POINT('',(153.60000104031,-146.0000010403,1.56)); +#487343 = DIRECTION('',(0.,0.,1.)); +#487344 = DIRECTION('',(-4.161285837067E-06,-0.999999999991,0.)); +#487345 = ORIENTED_EDGE('',*,*,#487346,.T.); +#487346 = EDGE_CURVE('',#487338,#487285,#487347,.T.); +#487347 = LINE('',#487348,#487349); +#487348 = CARTESIAN_POINT('',(153.85,-146.,1.56)); +#487349 = VECTOR('',#487350,1.); +#487350 = DIRECTION('',(0.,1.,0.)); +#487351 = FACE_BOUND('',#487352,.F.); +#487352 = EDGE_LOOP('',(#487353,#487364,#487372,#487381,#487389,#487398, + #487406,#487415)); +#487353 = ORIENTED_EDGE('',*,*,#487354,.T.); +#487354 = EDGE_CURVE('',#487355,#487357,#487359,.T.); +#487355 = VERTEX_POINT('',#487356); +#487356 = CARTESIAN_POINT('',(142.975,-134.325,1.56)); +#487357 = VERTEX_POINT('',#487358); +#487358 = CARTESIAN_POINT('',(142.75,-134.1,1.56)); +#487359 = CIRCLE('',#487360,0.225000087974); +#487360 = AXIS2_PLACEMENT_3D('',#487361,#487362,#487363); +#487361 = CARTESIAN_POINT('',(142.74999991202,-134.3250000879,1.56)); +#487362 = DIRECTION('',(0.,0.,1.)); +#487363 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#487364 = ORIENTED_EDGE('',*,*,#487365,.T.); +#487365 = EDGE_CURVE('',#487357,#487366,#487368,.T.); +#487366 = VERTEX_POINT('',#487367); +#487367 = CARTESIAN_POINT('',(142.25,-134.1,1.56)); +#487368 = LINE('',#487369,#487370); +#487369 = CARTESIAN_POINT('',(142.75,-134.1,1.56)); +#487370 = VECTOR('',#487371,1.); +#487371 = DIRECTION('',(-1.,0.,0.)); +#487372 = ORIENTED_EDGE('',*,*,#487373,.T.); +#487373 = EDGE_CURVE('',#487366,#487374,#487376,.T.); +#487374 = VERTEX_POINT('',#487375); +#487375 = CARTESIAN_POINT('',(142.025,-134.325,1.56)); +#487376 = CIRCLE('',#487377,0.225000087974); +#487377 = AXIS2_PLACEMENT_3D('',#487378,#487379,#487380); +#487378 = CARTESIAN_POINT('',(142.25000008797,-134.3250000879,1.56)); +#487379 = DIRECTION('',(0.,0.,1.)); +#487380 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#487381 = ORIENTED_EDGE('',*,*,#487382,.T.); +#487382 = EDGE_CURVE('',#487374,#487383,#487385,.T.); +#487383 = VERTEX_POINT('',#487384); +#487384 = CARTESIAN_POINT('',(142.025,-134.775,1.56)); +#487385 = LINE('',#487386,#487387); +#487386 = CARTESIAN_POINT('',(142.025,-134.325,1.56)); +#487387 = VECTOR('',#487388,1.); +#487388 = DIRECTION('',(0.,-1.,0.)); +#487389 = ORIENTED_EDGE('',*,*,#487390,.T.); +#487390 = EDGE_CURVE('',#487383,#487391,#487393,.T.); +#487391 = VERTEX_POINT('',#487392); +#487392 = CARTESIAN_POINT('',(142.25,-135.,1.56)); +#487393 = CIRCLE('',#487394,0.225000087974); +#487394 = AXIS2_PLACEMENT_3D('',#487395,#487396,#487397); +#487395 = CARTESIAN_POINT('',(142.25000008797,-134.774999912,1.56)); +#487396 = DIRECTION('',(0.,0.,1.)); +#487397 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#487398 = ORIENTED_EDGE('',*,*,#487399,.T.); +#487399 = EDGE_CURVE('',#487391,#487400,#487402,.T.); +#487400 = VERTEX_POINT('',#487401); +#487401 = CARTESIAN_POINT('',(142.75,-135.,1.56)); +#487402 = LINE('',#487403,#487404); +#487403 = CARTESIAN_POINT('',(142.25,-135.,1.56)); +#487404 = VECTOR('',#487405,1.); +#487405 = DIRECTION('',(1.,0.,0.)); +#487406 = ORIENTED_EDGE('',*,*,#487407,.T.); +#487407 = EDGE_CURVE('',#487400,#487408,#487410,.T.); +#487408 = VERTEX_POINT('',#487409); +#487409 = CARTESIAN_POINT('',(142.975,-134.775,1.56)); +#487410 = CIRCLE('',#487411,0.225000087974); +#487411 = AXIS2_PLACEMENT_3D('',#487412,#487413,#487414); +#487412 = CARTESIAN_POINT('',(142.74999991202,-134.774999912,1.56)); +#487413 = DIRECTION('',(0.,0.,1.)); +#487414 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#487415 = ORIENTED_EDGE('',*,*,#487416,.T.); +#487416 = EDGE_CURVE('',#487408,#487355,#487417,.T.); +#487417 = LINE('',#487418,#487419); +#487418 = CARTESIAN_POINT('',(142.975,-134.775,1.56)); +#487419 = VECTOR('',#487420,1.); +#487420 = DIRECTION('',(0.,1.,0.)); +#487421 = FACE_BOUND('',#487422,.F.); +#487422 = EDGE_LOOP('',(#487423,#487434,#487442,#487451,#487459,#487468, + #487476,#487485)); +#487423 = ORIENTED_EDGE('',*,*,#487424,.T.); +#487424 = EDGE_CURVE('',#487425,#487427,#487429,.T.); +#487425 = VERTEX_POINT('',#487426); +#487426 = CARTESIAN_POINT('',(142.975,-132.775,1.56)); +#487427 = VERTEX_POINT('',#487428); +#487428 = CARTESIAN_POINT('',(142.75,-132.55,1.56)); +#487429 = CIRCLE('',#487430,0.225000087974); +#487430 = AXIS2_PLACEMENT_3D('',#487431,#487432,#487433); +#487431 = CARTESIAN_POINT('',(142.74999991202,-132.7750000879,1.56)); +#487432 = DIRECTION('',(0.,0.,1.)); +#487433 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#487434 = ORIENTED_EDGE('',*,*,#487435,.T.); +#487435 = EDGE_CURVE('',#487427,#487436,#487438,.T.); +#487436 = VERTEX_POINT('',#487437); +#487437 = CARTESIAN_POINT('',(142.25,-132.55,1.56)); +#487438 = LINE('',#487439,#487440); +#487439 = CARTESIAN_POINT('',(142.75,-132.55,1.56)); +#487440 = VECTOR('',#487441,1.); +#487441 = DIRECTION('',(-1.,0.,0.)); +#487442 = ORIENTED_EDGE('',*,*,#487443,.T.); +#487443 = EDGE_CURVE('',#487436,#487444,#487446,.T.); +#487444 = VERTEX_POINT('',#487445); +#487445 = CARTESIAN_POINT('',(142.025,-132.775,1.56)); +#487446 = CIRCLE('',#487447,0.225000087974); +#487447 = AXIS2_PLACEMENT_3D('',#487448,#487449,#487450); +#487448 = CARTESIAN_POINT('',(142.25000008797,-132.7750000879,1.56)); +#487449 = DIRECTION('',(0.,0.,1.)); +#487450 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#487451 = ORIENTED_EDGE('',*,*,#487452,.T.); +#487452 = EDGE_CURVE('',#487444,#487453,#487455,.T.); +#487453 = VERTEX_POINT('',#487454); +#487454 = CARTESIAN_POINT('',(142.025,-133.225,1.56)); +#487455 = LINE('',#487456,#487457); +#487456 = CARTESIAN_POINT('',(142.025,-132.775,1.56)); +#487457 = VECTOR('',#487458,1.); +#487458 = DIRECTION('',(0.,-1.,0.)); +#487459 = ORIENTED_EDGE('',*,*,#487460,.T.); +#487460 = EDGE_CURVE('',#487453,#487461,#487463,.T.); +#487461 = VERTEX_POINT('',#487462); +#487462 = CARTESIAN_POINT('',(142.25,-133.45,1.56)); +#487463 = CIRCLE('',#487464,0.225000087974); +#487464 = AXIS2_PLACEMENT_3D('',#487465,#487466,#487467); +#487465 = CARTESIAN_POINT('',(142.25000008797,-133.224999912,1.56)); +#487466 = DIRECTION('',(0.,0.,1.)); +#487467 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#487468 = ORIENTED_EDGE('',*,*,#487469,.T.); +#487469 = EDGE_CURVE('',#487461,#487470,#487472,.T.); +#487470 = VERTEX_POINT('',#487471); +#487471 = CARTESIAN_POINT('',(142.75,-133.45,1.56)); +#487472 = LINE('',#487473,#487474); +#487473 = CARTESIAN_POINT('',(142.25,-133.45,1.56)); +#487474 = VECTOR('',#487475,1.); +#487475 = DIRECTION('',(1.,0.,0.)); +#487476 = ORIENTED_EDGE('',*,*,#487477,.T.); +#487477 = EDGE_CURVE('',#487470,#487478,#487480,.T.); +#487478 = VERTEX_POINT('',#487479); +#487479 = CARTESIAN_POINT('',(142.975,-133.225,1.56)); +#487480 = CIRCLE('',#487481,0.225000087974); +#487481 = AXIS2_PLACEMENT_3D('',#487482,#487483,#487484); +#487482 = CARTESIAN_POINT('',(142.74999991202,-133.224999912,1.56)); +#487483 = DIRECTION('',(0.,0.,1.)); +#487484 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#487485 = ORIENTED_EDGE('',*,*,#487486,.T.); +#487486 = EDGE_CURVE('',#487478,#487425,#487487,.T.); +#487487 = LINE('',#487488,#487489); +#487488 = CARTESIAN_POINT('',(142.975,-133.225,1.56)); +#487489 = VECTOR('',#487490,1.); +#487490 = DIRECTION('',(0.,1.,0.)); +#487491 = FACE_BOUND('',#487492,.F.); +#487492 = EDGE_LOOP('',(#487493,#487504,#487512,#487521,#487529,#487538, + #487546,#487555)); +#487493 = ORIENTED_EDGE('',*,*,#487494,.T.); +#487494 = EDGE_CURVE('',#487495,#487497,#487499,.T.); +#487495 = VERTEX_POINT('',#487496); +#487496 = CARTESIAN_POINT('',(134.53,-131.08,1.56)); +#487497 = VERTEX_POINT('',#487498); +#487498 = CARTESIAN_POINT('',(134.39,-130.94,1.56)); +#487499 = CIRCLE('',#487500,0.139999827126); +#487500 = AXIS2_PLACEMENT_3D('',#487501,#487502,#487503); +#487501 = CARTESIAN_POINT('',(134.39000017287,-131.0799998271,1.56)); +#487502 = DIRECTION('',(0.,0.,1.)); +#487503 = DIRECTION('',(0.999999999999,-1.234820045228E-06,0.)); +#487504 = ORIENTED_EDGE('',*,*,#487505,.T.); +#487505 = EDGE_CURVE('',#487497,#487506,#487508,.T.); +#487506 = VERTEX_POINT('',#487507); +#487507 = CARTESIAN_POINT('',(134.11,-130.94,1.56)); +#487508 = LINE('',#487509,#487510); +#487509 = CARTESIAN_POINT('',(134.39,-130.94,1.56)); +#487510 = VECTOR('',#487511,1.); +#487511 = DIRECTION('',(-1.,0.,0.)); +#487512 = ORIENTED_EDGE('',*,*,#487513,.T.); +#487513 = EDGE_CURVE('',#487506,#487514,#487516,.T.); +#487514 = VERTEX_POINT('',#487515); +#487515 = CARTESIAN_POINT('',(133.97,-131.08,1.56)); +#487516 = CIRCLE('',#487517,0.139999827126); +#487517 = AXIS2_PLACEMENT_3D('',#487518,#487519,#487520); +#487518 = CARTESIAN_POINT('',(134.10999982712,-131.0799998271,1.56)); +#487519 = DIRECTION('',(0.,0.,1.)); +#487520 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#487521 = ORIENTED_EDGE('',*,*,#487522,.T.); +#487522 = EDGE_CURVE('',#487514,#487523,#487525,.T.); +#487523 = VERTEX_POINT('',#487524); +#487524 = CARTESIAN_POINT('',(133.97,-131.42,1.56)); +#487525 = LINE('',#487526,#487527); +#487526 = CARTESIAN_POINT('',(133.97,-131.08,1.56)); +#487527 = VECTOR('',#487528,1.); +#487528 = DIRECTION('',(0.,-1.,0.)); +#487529 = ORIENTED_EDGE('',*,*,#487530,.T.); +#487530 = EDGE_CURVE('',#487523,#487531,#487533,.T.); +#487531 = VERTEX_POINT('',#487532); +#487532 = CARTESIAN_POINT('',(134.11,-131.56,1.56)); +#487533 = CIRCLE('',#487534,0.139999827126); +#487534 = AXIS2_PLACEMENT_3D('',#487535,#487536,#487537); +#487535 = CARTESIAN_POINT('',(134.10999982712,-131.4200001728,1.56)); +#487536 = DIRECTION('',(0.,0.,1.)); +#487537 = DIRECTION('',(-0.999999999999,1.234820045228E-06,0.)); +#487538 = ORIENTED_EDGE('',*,*,#487539,.T.); +#487539 = EDGE_CURVE('',#487531,#487540,#487542,.T.); +#487540 = VERTEX_POINT('',#487541); +#487541 = CARTESIAN_POINT('',(134.39,-131.56,1.56)); +#487542 = LINE('',#487543,#487544); +#487543 = CARTESIAN_POINT('',(134.11,-131.56,1.56)); +#487544 = VECTOR('',#487545,1.); +#487545 = DIRECTION('',(1.,0.,0.)); +#487546 = ORIENTED_EDGE('',*,*,#487547,.T.); +#487547 = EDGE_CURVE('',#487540,#487548,#487550,.T.); +#487548 = VERTEX_POINT('',#487549); +#487549 = CARTESIAN_POINT('',(134.53,-131.42,1.56)); +#487550 = CIRCLE('',#487551,0.139999827126); +#487551 = AXIS2_PLACEMENT_3D('',#487552,#487553,#487554); +#487552 = CARTESIAN_POINT('',(134.39000017287,-131.4200001728,1.56)); +#487553 = DIRECTION('',(0.,0.,1.)); +#487554 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#487555 = ORIENTED_EDGE('',*,*,#487556,.T.); +#487556 = EDGE_CURVE('',#487548,#487495,#487557,.T.); +#487557 = LINE('',#487558,#487559); +#487558 = CARTESIAN_POINT('',(134.53,-131.42,1.56)); +#487559 = VECTOR('',#487560,1.); +#487560 = DIRECTION('',(0.,1.,0.)); +#487561 = FACE_BOUND('',#487562,.F.); +#487562 = EDGE_LOOP('',(#487563,#487574,#487582,#487591,#487599,#487608, + #487616,#487625)); +#487563 = ORIENTED_EDGE('',*,*,#487564,.T.); +#487564 = EDGE_CURVE('',#487565,#487567,#487569,.T.); +#487565 = VERTEX_POINT('',#487566); +#487566 = CARTESIAN_POINT('',(135.49,-131.08,1.56)); +#487567 = VERTEX_POINT('',#487568); +#487568 = CARTESIAN_POINT('',(135.35,-130.94,1.56)); +#487569 = CIRCLE('',#487570,0.139999827125); +#487570 = AXIS2_PLACEMENT_3D('',#487571,#487572,#487573); +#487571 = CARTESIAN_POINT('',(135.35000017287,-131.0799998271,1.56)); +#487572 = DIRECTION('',(0.,0.,1.)); +#487573 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#487574 = ORIENTED_EDGE('',*,*,#487575,.T.); +#487575 = EDGE_CURVE('',#487567,#487576,#487578,.T.); +#487576 = VERTEX_POINT('',#487577); +#487577 = CARTESIAN_POINT('',(135.07,-130.94,1.56)); +#487578 = LINE('',#487579,#487580); +#487579 = CARTESIAN_POINT('',(135.35,-130.94,1.56)); +#487580 = VECTOR('',#487581,1.); +#487581 = DIRECTION('',(-1.,0.,0.)); +#487582 = ORIENTED_EDGE('',*,*,#487583,.T.); +#487583 = EDGE_CURVE('',#487576,#487584,#487586,.T.); +#487584 = VERTEX_POINT('',#487585); +#487585 = CARTESIAN_POINT('',(134.93,-131.08,1.56)); +#487586 = CIRCLE('',#487587,0.139999827125); +#487587 = AXIS2_PLACEMENT_3D('',#487588,#487589,#487590); +#487588 = CARTESIAN_POINT('',(135.06999982712,-131.0799998271,1.56)); +#487589 = DIRECTION('',(0.,0.,1.)); +#487590 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#487591 = ORIENTED_EDGE('',*,*,#487592,.T.); +#487592 = EDGE_CURVE('',#487584,#487593,#487595,.T.); +#487593 = VERTEX_POINT('',#487594); +#487594 = CARTESIAN_POINT('',(134.93,-131.42,1.56)); +#487595 = LINE('',#487596,#487597); +#487596 = CARTESIAN_POINT('',(134.93,-131.08,1.56)); +#487597 = VECTOR('',#487598,1.); +#487598 = DIRECTION('',(0.,-1.,0.)); +#487599 = ORIENTED_EDGE('',*,*,#487600,.T.); +#487600 = EDGE_CURVE('',#487593,#487601,#487603,.T.); +#487601 = VERTEX_POINT('',#487602); +#487602 = CARTESIAN_POINT('',(135.07,-131.56,1.56)); +#487603 = CIRCLE('',#487604,0.139999827125); +#487604 = AXIS2_PLACEMENT_3D('',#487605,#487606,#487607); +#487605 = CARTESIAN_POINT('',(135.06999982712,-131.4200001728,1.56)); +#487606 = DIRECTION('',(0.,0.,1.)); +#487607 = DIRECTION('',(-0.999999999999,1.234820451254E-06,0.)); +#487608 = ORIENTED_EDGE('',*,*,#487609,.T.); +#487609 = EDGE_CURVE('',#487601,#487610,#487612,.T.); +#487610 = VERTEX_POINT('',#487611); +#487611 = CARTESIAN_POINT('',(135.35,-131.56,1.56)); +#487612 = LINE('',#487613,#487614); +#487613 = CARTESIAN_POINT('',(135.07,-131.56,1.56)); +#487614 = VECTOR('',#487615,1.); +#487615 = DIRECTION('',(1.,0.,0.)); +#487616 = ORIENTED_EDGE('',*,*,#487617,.T.); +#487617 = EDGE_CURVE('',#487610,#487618,#487620,.T.); +#487618 = VERTEX_POINT('',#487619); +#487619 = CARTESIAN_POINT('',(135.49,-131.42,1.56)); +#487620 = CIRCLE('',#487621,0.139999827125); +#487621 = AXIS2_PLACEMENT_3D('',#487622,#487623,#487624); +#487622 = CARTESIAN_POINT('',(135.35000017287,-131.4200001728,1.56)); +#487623 = DIRECTION('',(0.,0.,1.)); +#487624 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#487625 = ORIENTED_EDGE('',*,*,#487626,.T.); +#487626 = EDGE_CURVE('',#487618,#487565,#487627,.T.); +#487627 = LINE('',#487628,#487629); +#487628 = CARTESIAN_POINT('',(135.49,-131.42,1.56)); +#487629 = VECTOR('',#487630,1.); +#487630 = DIRECTION('',(0.,1.,0.)); +#487631 = FACE_BOUND('',#487632,.F.); +#487632 = EDGE_LOOP('',(#487633,#487644,#487652,#487661,#487669,#487678, + #487686,#487695)); +#487633 = ORIENTED_EDGE('',*,*,#487634,.T.); +#487634 = EDGE_CURVE('',#487635,#487637,#487639,.T.); +#487635 = VERTEX_POINT('',#487636); +#487636 = CARTESIAN_POINT('',(144.225,-130.55,1.56)); +#487637 = VERTEX_POINT('',#487638); +#487638 = CARTESIAN_POINT('',(144.,-130.325,1.56)); +#487639 = CIRCLE('',#487640,0.225000087974); +#487640 = AXIS2_PLACEMENT_3D('',#487641,#487642,#487643); +#487641 = CARTESIAN_POINT('',(143.99999991202,-130.5500000879,1.56)); +#487642 = DIRECTION('',(0.,0.,1.)); +#487643 = DIRECTION('',(1.,3.909955352945E-07,-0.)); +#487644 = ORIENTED_EDGE('',*,*,#487645,.T.); +#487645 = EDGE_CURVE('',#487637,#487646,#487648,.T.); +#487646 = VERTEX_POINT('',#487647); +#487647 = CARTESIAN_POINT('',(143.5,-130.325,1.56)); +#487648 = LINE('',#487649,#487650); +#487649 = CARTESIAN_POINT('',(144.,-130.325,1.56)); +#487650 = VECTOR('',#487651,1.); +#487651 = DIRECTION('',(-1.,0.,0.)); +#487652 = ORIENTED_EDGE('',*,*,#487653,.T.); +#487653 = EDGE_CURVE('',#487646,#487654,#487656,.T.); +#487654 = VERTEX_POINT('',#487655); +#487655 = CARTESIAN_POINT('',(143.275,-130.55,1.56)); +#487656 = CIRCLE('',#487657,0.225000087974); +#487657 = AXIS2_PLACEMENT_3D('',#487658,#487659,#487660); +#487658 = CARTESIAN_POINT('',(143.50000008797,-130.5500000879,1.56)); +#487659 = DIRECTION('',(0.,0.,1.)); +#487660 = DIRECTION('',(-3.909956616132E-07,1.,0.)); +#487661 = ORIENTED_EDGE('',*,*,#487662,.T.); +#487662 = EDGE_CURVE('',#487654,#487663,#487665,.T.); +#487663 = VERTEX_POINT('',#487664); +#487664 = CARTESIAN_POINT('',(143.275,-131.,1.56)); +#487665 = LINE('',#487666,#487667); +#487666 = CARTESIAN_POINT('',(143.275,-130.55,1.56)); +#487667 = VECTOR('',#487668,1.); +#487668 = DIRECTION('',(0.,-1.,0.)); +#487669 = ORIENTED_EDGE('',*,*,#487670,.T.); +#487670 = EDGE_CURVE('',#487663,#487671,#487673,.T.); +#487671 = VERTEX_POINT('',#487672); +#487672 = CARTESIAN_POINT('',(143.5,-131.225,1.56)); +#487673 = CIRCLE('',#487674,0.225000087974); +#487674 = AXIS2_PLACEMENT_3D('',#487675,#487676,#487677); +#487675 = CARTESIAN_POINT('',(143.50000008797,-130.999999912,1.56)); +#487676 = DIRECTION('',(0.,0.,1.)); +#487677 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#487678 = ORIENTED_EDGE('',*,*,#487679,.T.); +#487679 = EDGE_CURVE('',#487671,#487680,#487682,.T.); +#487680 = VERTEX_POINT('',#487681); +#487681 = CARTESIAN_POINT('',(144.,-131.225,1.56)); +#487682 = LINE('',#487683,#487684); +#487683 = CARTESIAN_POINT('',(143.5,-131.225,1.56)); +#487684 = VECTOR('',#487685,1.); +#487685 = DIRECTION('',(1.,0.,0.)); +#487686 = ORIENTED_EDGE('',*,*,#487687,.T.); +#487687 = EDGE_CURVE('',#487680,#487688,#487690,.T.); +#487688 = VERTEX_POINT('',#487689); +#487689 = CARTESIAN_POINT('',(144.225,-131.,1.56)); +#487690 = CIRCLE('',#487691,0.225000087974); +#487691 = AXIS2_PLACEMENT_3D('',#487692,#487693,#487694); +#487692 = CARTESIAN_POINT('',(143.99999991202,-130.999999912,1.56)); +#487693 = DIRECTION('',(0.,0.,1.)); +#487694 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#487695 = ORIENTED_EDGE('',*,*,#487696,.T.); +#487696 = EDGE_CURVE('',#487688,#487635,#487697,.T.); +#487697 = LINE('',#487698,#487699); +#487698 = CARTESIAN_POINT('',(144.225,-131.,1.56)); +#487699 = VECTOR('',#487700,1.); +#487700 = DIRECTION('',(0.,1.,0.)); +#487701 = FACE_BOUND('',#487702,.F.); +#487702 = EDGE_LOOP('',(#487703,#487714,#487722,#487731,#487739,#487748, + #487756,#487765)); +#487703 = ORIENTED_EDGE('',*,*,#487704,.T.); +#487704 = EDGE_CURVE('',#487705,#487707,#487709,.T.); +#487705 = VERTEX_POINT('',#487706); +#487706 = CARTESIAN_POINT('',(134.51,-129.815,1.56)); +#487707 = VERTEX_POINT('',#487708); +#487708 = CARTESIAN_POINT('',(134.375,-129.68,1.56)); +#487709 = CIRCLE('',#487710,0.135001418495); +#487710 = AXIS2_PLACEMENT_3D('',#487711,#487712,#487713); +#487711 = CARTESIAN_POINT('',(134.37499858151,-129.8150014184,1.56)); +#487712 = DIRECTION('',(0.,0.,1.)); +#487713 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#487714 = ORIENTED_EDGE('',*,*,#487715,.T.); +#487715 = EDGE_CURVE('',#487707,#487716,#487718,.T.); +#487716 = VERTEX_POINT('',#487717); +#487717 = CARTESIAN_POINT('',(134.105,-129.68,1.56)); +#487718 = LINE('',#487719,#487720); +#487719 = CARTESIAN_POINT('',(134.375,-129.68,1.56)); +#487720 = VECTOR('',#487721,1.); +#487721 = DIRECTION('',(-1.,0.,0.)); +#487722 = ORIENTED_EDGE('',*,*,#487723,.T.); +#487723 = EDGE_CURVE('',#487716,#487724,#487726,.T.); +#487724 = VERTEX_POINT('',#487725); +#487725 = CARTESIAN_POINT('',(133.97,-129.815,1.56)); +#487726 = CIRCLE('',#487727,0.135001418495); +#487727 = AXIS2_PLACEMENT_3D('',#487728,#487729,#487730); +#487728 = CARTESIAN_POINT('',(134.10500141848,-129.8150014184,1.56)); +#487729 = DIRECTION('',(0.,0.,1.)); +#487730 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#487731 = ORIENTED_EDGE('',*,*,#487732,.T.); +#487732 = EDGE_CURVE('',#487724,#487733,#487735,.T.); +#487733 = VERTEX_POINT('',#487734); +#487734 = CARTESIAN_POINT('',(133.97,-130.185,1.56)); +#487735 = LINE('',#487736,#487737); +#487736 = CARTESIAN_POINT('',(133.97,-129.815,1.56)); +#487737 = VECTOR('',#487738,1.); +#487738 = DIRECTION('',(0.,-1.,0.)); +#487739 = ORIENTED_EDGE('',*,*,#487740,.T.); +#487740 = EDGE_CURVE('',#487733,#487741,#487743,.T.); +#487741 = VERTEX_POINT('',#487742); +#487742 = CARTESIAN_POINT('',(134.105,-130.32,1.56)); +#487743 = CIRCLE('',#487744,0.135001418495); +#487744 = AXIS2_PLACEMENT_3D('',#487745,#487746,#487747); +#487745 = CARTESIAN_POINT('',(134.10500141848,-130.1849985815,1.56)); +#487746 = DIRECTION('',(0.,0.,1.)); +#487747 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#487748 = ORIENTED_EDGE('',*,*,#487749,.T.); +#487749 = EDGE_CURVE('',#487741,#487750,#487752,.T.); +#487750 = VERTEX_POINT('',#487751); +#487751 = CARTESIAN_POINT('',(134.375,-130.32,1.56)); +#487752 = LINE('',#487753,#487754); +#487753 = CARTESIAN_POINT('',(134.105,-130.32,1.56)); +#487754 = VECTOR('',#487755,1.); +#487755 = DIRECTION('',(1.,0.,0.)); +#487756 = ORIENTED_EDGE('',*,*,#487757,.T.); +#487757 = EDGE_CURVE('',#487750,#487758,#487760,.T.); +#487758 = VERTEX_POINT('',#487759); +#487759 = CARTESIAN_POINT('',(134.51,-130.185,1.56)); +#487760 = CIRCLE('',#487761,0.135001418495); +#487761 = AXIS2_PLACEMENT_3D('',#487762,#487763,#487764); +#487762 = CARTESIAN_POINT('',(134.37499858151,-130.1849985815,1.56)); +#487763 = DIRECTION('',(0.,0.,1.)); +#487764 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#487765 = ORIENTED_EDGE('',*,*,#487766,.T.); +#487766 = EDGE_CURVE('',#487758,#487705,#487767,.T.); +#487767 = LINE('',#487768,#487769); +#487768 = CARTESIAN_POINT('',(134.51,-130.185,1.56)); +#487769 = VECTOR('',#487770,1.); +#487770 = DIRECTION('',(0.,1.,0.)); +#487771 = FACE_BOUND('',#487772,.F.); +#487772 = EDGE_LOOP('',(#487773,#487784,#487792,#487801,#487809,#487818, + #487826,#487835)); +#487773 = ORIENTED_EDGE('',*,*,#487774,.T.); +#487774 = EDGE_CURVE('',#487775,#487777,#487779,.T.); +#487775 = VERTEX_POINT('',#487776); +#487776 = CARTESIAN_POINT('',(135.53,-129.815,1.56)); +#487777 = VERTEX_POINT('',#487778); +#487778 = CARTESIAN_POINT('',(135.395,-129.68,1.56)); +#487779 = CIRCLE('',#487780,0.135001418495); +#487780 = AXIS2_PLACEMENT_3D('',#487781,#487782,#487783); +#487781 = CARTESIAN_POINT('',(135.39499858151,-129.8150014184,1.56)); +#487782 = DIRECTION('',(0.,0.,1.)); +#487783 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#487784 = ORIENTED_EDGE('',*,*,#487785,.T.); +#487785 = EDGE_CURVE('',#487777,#487786,#487788,.T.); +#487786 = VERTEX_POINT('',#487787); +#487787 = CARTESIAN_POINT('',(135.125,-129.68,1.56)); +#487788 = LINE('',#487789,#487790); +#487789 = CARTESIAN_POINT('',(135.395,-129.68,1.56)); +#487790 = VECTOR('',#487791,1.); +#487791 = DIRECTION('',(-1.,0.,0.)); +#487792 = ORIENTED_EDGE('',*,*,#487793,.T.); +#487793 = EDGE_CURVE('',#487786,#487794,#487796,.T.); +#487794 = VERTEX_POINT('',#487795); +#487795 = CARTESIAN_POINT('',(134.99,-129.815,1.56)); +#487796 = CIRCLE('',#487797,0.135001418495); +#487797 = AXIS2_PLACEMENT_3D('',#487798,#487799,#487800); +#487798 = CARTESIAN_POINT('',(135.12500141848,-129.8150014184,1.56)); +#487799 = DIRECTION('',(0.,0.,1.)); +#487800 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#487801 = ORIENTED_EDGE('',*,*,#487802,.T.); +#487802 = EDGE_CURVE('',#487794,#487803,#487805,.T.); +#487803 = VERTEX_POINT('',#487804); +#487804 = CARTESIAN_POINT('',(134.99,-130.185,1.56)); +#487805 = LINE('',#487806,#487807); +#487806 = CARTESIAN_POINT('',(134.99,-129.815,1.56)); +#487807 = VECTOR('',#487808,1.); +#487808 = DIRECTION('',(0.,-1.,0.)); +#487809 = ORIENTED_EDGE('',*,*,#487810,.T.); +#487810 = EDGE_CURVE('',#487803,#487811,#487813,.T.); +#487811 = VERTEX_POINT('',#487812); +#487812 = CARTESIAN_POINT('',(135.125,-130.32,1.56)); +#487813 = CIRCLE('',#487814,0.135001418495); +#487814 = AXIS2_PLACEMENT_3D('',#487815,#487816,#487817); +#487815 = CARTESIAN_POINT('',(135.12500141848,-130.1849985815,1.56)); +#487816 = DIRECTION('',(0.,0.,1.)); +#487817 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#487818 = ORIENTED_EDGE('',*,*,#487819,.T.); +#487819 = EDGE_CURVE('',#487811,#487820,#487822,.T.); +#487820 = VERTEX_POINT('',#487821); +#487821 = CARTESIAN_POINT('',(135.395,-130.32,1.56)); +#487822 = LINE('',#487823,#487824); +#487823 = CARTESIAN_POINT('',(135.125,-130.32,1.56)); +#487824 = VECTOR('',#487825,1.); +#487825 = DIRECTION('',(1.,0.,0.)); +#487826 = ORIENTED_EDGE('',*,*,#487827,.T.); +#487827 = EDGE_CURVE('',#487820,#487828,#487830,.T.); +#487828 = VERTEX_POINT('',#487829); +#487829 = CARTESIAN_POINT('',(135.53,-130.185,1.56)); +#487830 = CIRCLE('',#487831,0.135001418495); +#487831 = AXIS2_PLACEMENT_3D('',#487832,#487833,#487834); +#487832 = CARTESIAN_POINT('',(135.39499858151,-130.1849985815,1.56)); +#487833 = DIRECTION('',(0.,0.,1.)); +#487834 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#487835 = ORIENTED_EDGE('',*,*,#487836,.T.); +#487836 = EDGE_CURVE('',#487828,#487775,#487837,.T.); +#487837 = LINE('',#487838,#487839); +#487838 = CARTESIAN_POINT('',(135.53,-130.185,1.56)); +#487839 = VECTOR('',#487840,1.); +#487840 = DIRECTION('',(0.,1.,0.)); +#487841 = FACE_BOUND('',#487842,.F.); +#487842 = EDGE_LOOP('',(#487843,#487854,#487862,#487871,#487879,#487888, + #487896,#487905)); +#487843 = ORIENTED_EDGE('',*,*,#487844,.T.); +#487844 = EDGE_CURVE('',#487845,#487847,#487849,.T.); +#487845 = VERTEX_POINT('',#487846); +#487846 = CARTESIAN_POINT('',(137.01,-129.815,1.56)); +#487847 = VERTEX_POINT('',#487848); +#487848 = CARTESIAN_POINT('',(136.875,-129.68,1.56)); +#487849 = CIRCLE('',#487850,0.135001418495); +#487850 = AXIS2_PLACEMENT_3D('',#487851,#487852,#487853); +#487851 = CARTESIAN_POINT('',(136.87499858151,-129.8150014184,1.56)); +#487852 = DIRECTION('',(0.,0.,1.)); +#487853 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#487854 = ORIENTED_EDGE('',*,*,#487855,.T.); +#487855 = EDGE_CURVE('',#487847,#487856,#487858,.T.); +#487856 = VERTEX_POINT('',#487857); +#487857 = CARTESIAN_POINT('',(136.605,-129.68,1.56)); +#487858 = LINE('',#487859,#487860); +#487859 = CARTESIAN_POINT('',(136.875,-129.68,1.56)); +#487860 = VECTOR('',#487861,1.); +#487861 = DIRECTION('',(-1.,0.,0.)); +#487862 = ORIENTED_EDGE('',*,*,#487863,.T.); +#487863 = EDGE_CURVE('',#487856,#487864,#487866,.T.); +#487864 = VERTEX_POINT('',#487865); +#487865 = CARTESIAN_POINT('',(136.47,-129.815,1.56)); +#487866 = CIRCLE('',#487867,0.135001418495); +#487867 = AXIS2_PLACEMENT_3D('',#487868,#487869,#487870); +#487868 = CARTESIAN_POINT('',(136.60500141848,-129.8150014184,1.56)); +#487869 = DIRECTION('',(0.,0.,1.)); +#487870 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#487871 = ORIENTED_EDGE('',*,*,#487872,.T.); +#487872 = EDGE_CURVE('',#487864,#487873,#487875,.T.); +#487873 = VERTEX_POINT('',#487874); +#487874 = CARTESIAN_POINT('',(136.47,-130.185,1.56)); +#487875 = LINE('',#487876,#487877); +#487876 = CARTESIAN_POINT('',(136.47,-129.815,1.56)); +#487877 = VECTOR('',#487878,1.); +#487878 = DIRECTION('',(0.,-1.,0.)); +#487879 = ORIENTED_EDGE('',*,*,#487880,.T.); +#487880 = EDGE_CURVE('',#487873,#487881,#487883,.T.); +#487881 = VERTEX_POINT('',#487882); +#487882 = CARTESIAN_POINT('',(136.605,-130.32,1.56)); +#487883 = CIRCLE('',#487884,0.135001418495); +#487884 = AXIS2_PLACEMENT_3D('',#487885,#487886,#487887); +#487885 = CARTESIAN_POINT('',(136.60500141848,-130.1849985815,1.56)); +#487886 = DIRECTION('',(0.,0.,1.)); +#487887 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#487888 = ORIENTED_EDGE('',*,*,#487889,.T.); +#487889 = EDGE_CURVE('',#487881,#487890,#487892,.T.); +#487890 = VERTEX_POINT('',#487891); +#487891 = CARTESIAN_POINT('',(136.875,-130.32,1.56)); +#487892 = LINE('',#487893,#487894); +#487893 = CARTESIAN_POINT('',(136.605,-130.32,1.56)); +#487894 = VECTOR('',#487895,1.); +#487895 = DIRECTION('',(1.,0.,0.)); +#487896 = ORIENTED_EDGE('',*,*,#487897,.T.); +#487897 = EDGE_CURVE('',#487890,#487898,#487900,.T.); +#487898 = VERTEX_POINT('',#487899); +#487899 = CARTESIAN_POINT('',(137.01,-130.185,1.56)); +#487900 = CIRCLE('',#487901,0.135001418495); +#487901 = AXIS2_PLACEMENT_3D('',#487902,#487903,#487904); +#487902 = CARTESIAN_POINT('',(136.87499858151,-130.1849985815,1.56)); +#487903 = DIRECTION('',(0.,0.,1.)); +#487904 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#487905 = ORIENTED_EDGE('',*,*,#487906,.T.); +#487906 = EDGE_CURVE('',#487898,#487845,#487907,.T.); +#487907 = LINE('',#487908,#487909); +#487908 = CARTESIAN_POINT('',(137.01,-130.185,1.56)); +#487909 = VECTOR('',#487910,1.); +#487910 = DIRECTION('',(0.,1.,0.)); +#487911 = FACE_BOUND('',#487912,.F.); +#487912 = EDGE_LOOP('',(#487913,#487924,#487932,#487941,#487949,#487958, + #487966,#487975)); +#487913 = ORIENTED_EDGE('',*,*,#487914,.T.); +#487914 = EDGE_CURVE('',#487915,#487917,#487919,.T.); +#487915 = VERTEX_POINT('',#487916); +#487916 = CARTESIAN_POINT('',(138.03,-129.815,1.56)); +#487917 = VERTEX_POINT('',#487918); +#487918 = CARTESIAN_POINT('',(137.895,-129.68,1.56)); +#487919 = CIRCLE('',#487920,0.135001418495); +#487920 = AXIS2_PLACEMENT_3D('',#487921,#487922,#487923); +#487921 = CARTESIAN_POINT('',(137.89499858151,-129.8150014184,1.56)); +#487922 = DIRECTION('',(0.,0.,1.)); +#487923 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#487924 = ORIENTED_EDGE('',*,*,#487925,.T.); +#487925 = EDGE_CURVE('',#487917,#487926,#487928,.T.); +#487926 = VERTEX_POINT('',#487927); +#487927 = CARTESIAN_POINT('',(137.625,-129.68,1.56)); +#487928 = LINE('',#487929,#487930); +#487929 = CARTESIAN_POINT('',(137.895,-129.68,1.56)); +#487930 = VECTOR('',#487931,1.); +#487931 = DIRECTION('',(-1.,0.,0.)); +#487932 = ORIENTED_EDGE('',*,*,#487933,.T.); +#487933 = EDGE_CURVE('',#487926,#487934,#487936,.T.); +#487934 = VERTEX_POINT('',#487935); +#487935 = CARTESIAN_POINT('',(137.49,-129.815,1.56)); +#487936 = CIRCLE('',#487937,0.135001418495); +#487937 = AXIS2_PLACEMENT_3D('',#487938,#487939,#487940); +#487938 = CARTESIAN_POINT('',(137.62500141848,-129.8150014184,1.56)); +#487939 = DIRECTION('',(0.,0.,1.)); +#487940 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#487941 = ORIENTED_EDGE('',*,*,#487942,.T.); +#487942 = EDGE_CURVE('',#487934,#487943,#487945,.T.); +#487943 = VERTEX_POINT('',#487944); +#487944 = CARTESIAN_POINT('',(137.49,-130.185,1.56)); +#487945 = LINE('',#487946,#487947); +#487946 = CARTESIAN_POINT('',(137.49,-129.815,1.56)); +#487947 = VECTOR('',#487948,1.); +#487948 = DIRECTION('',(0.,-1.,0.)); +#487949 = ORIENTED_EDGE('',*,*,#487950,.T.); +#487950 = EDGE_CURVE('',#487943,#487951,#487953,.T.); +#487951 = VERTEX_POINT('',#487952); +#487952 = CARTESIAN_POINT('',(137.625,-130.32,1.56)); +#487953 = CIRCLE('',#487954,0.135001418495); +#487954 = AXIS2_PLACEMENT_3D('',#487955,#487956,#487957); +#487955 = CARTESIAN_POINT('',(137.62500141848,-130.1849985815,1.56)); +#487956 = DIRECTION('',(0.,0.,1.)); +#487957 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#487958 = ORIENTED_EDGE('',*,*,#487959,.T.); +#487959 = EDGE_CURVE('',#487951,#487960,#487962,.T.); +#487960 = VERTEX_POINT('',#487961); +#487961 = CARTESIAN_POINT('',(137.895,-130.32,1.56)); +#487962 = LINE('',#487963,#487964); +#487963 = CARTESIAN_POINT('',(137.625,-130.32,1.56)); +#487964 = VECTOR('',#487965,1.); +#487965 = DIRECTION('',(1.,0.,0.)); +#487966 = ORIENTED_EDGE('',*,*,#487967,.T.); +#487967 = EDGE_CURVE('',#487960,#487968,#487970,.T.); +#487968 = VERTEX_POINT('',#487969); +#487969 = CARTESIAN_POINT('',(138.03,-130.185,1.56)); +#487970 = CIRCLE('',#487971,0.135001418495); +#487971 = AXIS2_PLACEMENT_3D('',#487972,#487973,#487974); +#487972 = CARTESIAN_POINT('',(137.89499858151,-130.1849985815,1.56)); +#487973 = DIRECTION('',(0.,0.,1.)); +#487974 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#487975 = ORIENTED_EDGE('',*,*,#487976,.T.); +#487976 = EDGE_CURVE('',#487968,#487915,#487977,.T.); +#487977 = LINE('',#487978,#487979); +#487978 = CARTESIAN_POINT('',(138.03,-130.185,1.56)); +#487979 = VECTOR('',#487980,1.); +#487980 = DIRECTION('',(0.,1.,0.)); +#487981 = FACE_BOUND('',#487982,.F.); +#487982 = EDGE_LOOP('',(#487983,#487994,#488002,#488011,#488019,#488028, + #488036,#488045)); +#487983 = ORIENTED_EDGE('',*,*,#487984,.T.); +#487984 = EDGE_CURVE('',#487985,#487987,#487989,.T.); +#487985 = VERTEX_POINT('',#487986); +#487986 = CARTESIAN_POINT('',(141.31,-129.84,1.56)); +#487987 = VERTEX_POINT('',#487988); +#487988 = CARTESIAN_POINT('',(141.17,-129.7,1.56)); +#487989 = CIRCLE('',#487990,0.139999827125); +#487990 = AXIS2_PLACEMENT_3D('',#487991,#487992,#487993); +#487991 = CARTESIAN_POINT('',(141.17000017287,-129.8399998271,1.56)); +#487992 = DIRECTION('',(0.,0.,1.)); +#487993 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#487994 = ORIENTED_EDGE('',*,*,#487995,.T.); +#487995 = EDGE_CURVE('',#487987,#487996,#487998,.T.); +#487996 = VERTEX_POINT('',#487997); +#487997 = CARTESIAN_POINT('',(140.83,-129.7,1.56)); +#487998 = LINE('',#487999,#488000); +#487999 = CARTESIAN_POINT('',(141.17,-129.7,1.56)); +#488000 = VECTOR('',#488001,1.); +#488001 = DIRECTION('',(-1.,0.,0.)); +#488002 = ORIENTED_EDGE('',*,*,#488003,.T.); +#488003 = EDGE_CURVE('',#487996,#488004,#488006,.T.); +#488004 = VERTEX_POINT('',#488005); +#488005 = CARTESIAN_POINT('',(140.69,-129.84,1.56)); +#488006 = CIRCLE('',#488007,0.139999827125); +#488007 = AXIS2_PLACEMENT_3D('',#488008,#488009,#488010); +#488008 = CARTESIAN_POINT('',(140.82999982712,-129.8399998271,1.56)); +#488009 = DIRECTION('',(0.,0.,1.)); +#488010 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#488011 = ORIENTED_EDGE('',*,*,#488012,.T.); +#488012 = EDGE_CURVE('',#488004,#488013,#488015,.T.); +#488013 = VERTEX_POINT('',#488014); +#488014 = CARTESIAN_POINT('',(140.69,-130.12,1.56)); +#488015 = LINE('',#488016,#488017); +#488016 = CARTESIAN_POINT('',(140.69,-129.84,1.56)); +#488017 = VECTOR('',#488018,1.); +#488018 = DIRECTION('',(0.,-1.,0.)); +#488019 = ORIENTED_EDGE('',*,*,#488020,.T.); +#488020 = EDGE_CURVE('',#488013,#488021,#488023,.T.); +#488021 = VERTEX_POINT('',#488022); +#488022 = CARTESIAN_POINT('',(140.83,-130.26,1.56)); +#488023 = CIRCLE('',#488024,0.139999827125); +#488024 = AXIS2_PLACEMENT_3D('',#488025,#488026,#488027); +#488025 = CARTESIAN_POINT('',(140.82999982712,-130.1200001728,1.56)); +#488026 = DIRECTION('',(0.,0.,1.)); +#488027 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#488028 = ORIENTED_EDGE('',*,*,#488029,.T.); +#488029 = EDGE_CURVE('',#488021,#488030,#488032,.T.); +#488030 = VERTEX_POINT('',#488031); +#488031 = CARTESIAN_POINT('',(141.17,-130.26,1.56)); +#488032 = LINE('',#488033,#488034); +#488033 = CARTESIAN_POINT('',(140.83,-130.26,1.56)); +#488034 = VECTOR('',#488035,1.); +#488035 = DIRECTION('',(1.,0.,0.)); +#488036 = ORIENTED_EDGE('',*,*,#488037,.T.); +#488037 = EDGE_CURVE('',#488030,#488038,#488040,.T.); +#488038 = VERTEX_POINT('',#488039); +#488039 = CARTESIAN_POINT('',(141.31,-130.12,1.56)); +#488040 = CIRCLE('',#488041,0.139999827125); +#488041 = AXIS2_PLACEMENT_3D('',#488042,#488043,#488044); +#488042 = CARTESIAN_POINT('',(141.17000017287,-130.1200001728,1.56)); +#488043 = DIRECTION('',(0.,0.,1.)); +#488044 = DIRECTION('',(-1.234820451254E-06,-0.999999999999,0.)); +#488045 = ORIENTED_EDGE('',*,*,#488046,.T.); +#488046 = EDGE_CURVE('',#488038,#487985,#488047,.T.); +#488047 = LINE('',#488048,#488049); +#488048 = CARTESIAN_POINT('',(141.31,-130.12,1.56)); +#488049 = VECTOR('',#488050,1.); +#488050 = DIRECTION('',(0.,1.,0.)); +#488051 = FACE_BOUND('',#488052,.F.); +#488052 = EDGE_LOOP('',(#488053,#488064,#488072,#488081,#488089,#488098, + #488106,#488115)); +#488053 = ORIENTED_EDGE('',*,*,#488054,.T.); +#488054 = EDGE_CURVE('',#488055,#488057,#488059,.T.); +#488055 = VERTEX_POINT('',#488056); +#488056 = CARTESIAN_POINT('',(142.56,-129.84,1.56)); +#488057 = VERTEX_POINT('',#488058); +#488058 = CARTESIAN_POINT('',(142.42,-129.7,1.56)); +#488059 = CIRCLE('',#488060,0.139999827125); +#488060 = AXIS2_PLACEMENT_3D('',#488061,#488062,#488063); +#488061 = CARTESIAN_POINT('',(142.42000017287,-129.8399998271,1.56)); +#488062 = DIRECTION('',(0.,0.,1.)); +#488063 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#488064 = ORIENTED_EDGE('',*,*,#488065,.T.); +#488065 = EDGE_CURVE('',#488057,#488066,#488068,.T.); +#488066 = VERTEX_POINT('',#488067); +#488067 = CARTESIAN_POINT('',(142.08,-129.7,1.56)); +#488068 = LINE('',#488069,#488070); +#488069 = CARTESIAN_POINT('',(142.42,-129.7,1.56)); +#488070 = VECTOR('',#488071,1.); +#488071 = DIRECTION('',(-1.,0.,0.)); +#488072 = ORIENTED_EDGE('',*,*,#488073,.T.); +#488073 = EDGE_CURVE('',#488066,#488074,#488076,.T.); +#488074 = VERTEX_POINT('',#488075); +#488075 = CARTESIAN_POINT('',(141.94,-129.84,1.56)); +#488076 = CIRCLE('',#488077,0.139999827125); +#488077 = AXIS2_PLACEMENT_3D('',#488078,#488079,#488080); +#488078 = CARTESIAN_POINT('',(142.07999982712,-129.8399998271,1.56)); +#488079 = DIRECTION('',(0.,0.,1.)); +#488080 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#488081 = ORIENTED_EDGE('',*,*,#488082,.T.); +#488082 = EDGE_CURVE('',#488074,#488083,#488085,.T.); +#488083 = VERTEX_POINT('',#488084); +#488084 = CARTESIAN_POINT('',(141.94,-130.12,1.56)); +#488085 = LINE('',#488086,#488087); +#488086 = CARTESIAN_POINT('',(141.94,-129.84,1.56)); +#488087 = VECTOR('',#488088,1.); +#488088 = DIRECTION('',(0.,-1.,0.)); +#488089 = ORIENTED_EDGE('',*,*,#488090,.T.); +#488090 = EDGE_CURVE('',#488083,#488091,#488093,.T.); +#488091 = VERTEX_POINT('',#488092); +#488092 = CARTESIAN_POINT('',(142.08,-130.26,1.56)); +#488093 = CIRCLE('',#488094,0.139999827125); +#488094 = AXIS2_PLACEMENT_3D('',#488095,#488096,#488097); +#488095 = CARTESIAN_POINT('',(142.07999982712,-130.1200001728,1.56)); +#488096 = DIRECTION('',(0.,0.,1.)); +#488097 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#488098 = ORIENTED_EDGE('',*,*,#488099,.T.); +#488099 = EDGE_CURVE('',#488091,#488100,#488102,.T.); +#488100 = VERTEX_POINT('',#488101); +#488101 = CARTESIAN_POINT('',(142.42,-130.26,1.56)); +#488102 = LINE('',#488103,#488104); +#488103 = CARTESIAN_POINT('',(142.08,-130.26,1.56)); +#488104 = VECTOR('',#488105,1.); +#488105 = DIRECTION('',(1.,0.,0.)); +#488106 = ORIENTED_EDGE('',*,*,#488107,.T.); +#488107 = EDGE_CURVE('',#488100,#488108,#488110,.T.); +#488108 = VERTEX_POINT('',#488109); +#488109 = CARTESIAN_POINT('',(142.56,-130.12,1.56)); +#488110 = CIRCLE('',#488111,0.139999827125); +#488111 = AXIS2_PLACEMENT_3D('',#488112,#488113,#488114); +#488112 = CARTESIAN_POINT('',(142.42000017287,-130.1200001728,1.56)); +#488113 = DIRECTION('',(0.,0.,1.)); +#488114 = DIRECTION('',(-1.234820451254E-06,-0.999999999999,0.)); +#488115 = ORIENTED_EDGE('',*,*,#488116,.T.); +#488116 = EDGE_CURVE('',#488108,#488055,#488117,.T.); +#488117 = LINE('',#488118,#488119); +#488118 = CARTESIAN_POINT('',(142.56,-130.12,1.56)); +#488119 = VECTOR('',#488120,1.); +#488120 = DIRECTION('',(0.,1.,0.)); +#488121 = FACE_BOUND('',#488122,.F.); +#488122 = EDGE_LOOP('',(#488123,#488134,#488142,#488151,#488159,#488168, + #488176,#488185)); +#488123 = ORIENTED_EDGE('',*,*,#488124,.T.); +#488124 = EDGE_CURVE('',#488125,#488127,#488129,.T.); +#488125 = VERTEX_POINT('',#488126); +#488126 = CARTESIAN_POINT('',(144.225,-129.,1.56)); +#488127 = VERTEX_POINT('',#488128); +#488128 = CARTESIAN_POINT('',(144.,-128.775,1.56)); +#488129 = CIRCLE('',#488130,0.225000087974); +#488130 = AXIS2_PLACEMENT_3D('',#488131,#488132,#488133); +#488131 = CARTESIAN_POINT('',(143.99999991202,-129.0000000879,1.56)); +#488132 = DIRECTION('',(0.,0.,1.)); +#488133 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#488134 = ORIENTED_EDGE('',*,*,#488135,.T.); +#488135 = EDGE_CURVE('',#488127,#488136,#488138,.T.); +#488136 = VERTEX_POINT('',#488137); +#488137 = CARTESIAN_POINT('',(143.5,-128.775,1.56)); +#488138 = LINE('',#488139,#488140); +#488139 = CARTESIAN_POINT('',(144.,-128.775,1.56)); +#488140 = VECTOR('',#488141,1.); +#488141 = DIRECTION('',(-1.,0.,0.)); +#488142 = ORIENTED_EDGE('',*,*,#488143,.T.); +#488143 = EDGE_CURVE('',#488136,#488144,#488146,.T.); +#488144 = VERTEX_POINT('',#488145); +#488145 = CARTESIAN_POINT('',(143.275,-129.,1.56)); +#488146 = CIRCLE('',#488147,0.225000087974); +#488147 = AXIS2_PLACEMENT_3D('',#488148,#488149,#488150); +#488148 = CARTESIAN_POINT('',(143.50000008797,-129.0000000879,1.56)); +#488149 = DIRECTION('',(0.,0.,1.)); +#488150 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#488151 = ORIENTED_EDGE('',*,*,#488152,.T.); +#488152 = EDGE_CURVE('',#488144,#488153,#488155,.T.); +#488153 = VERTEX_POINT('',#488154); +#488154 = CARTESIAN_POINT('',(143.275,-129.45,1.56)); +#488155 = LINE('',#488156,#488157); +#488156 = CARTESIAN_POINT('',(143.275,-129.,1.56)); +#488157 = VECTOR('',#488158,1.); +#488158 = DIRECTION('',(0.,-1.,0.)); +#488159 = ORIENTED_EDGE('',*,*,#488160,.T.); +#488160 = EDGE_CURVE('',#488153,#488161,#488163,.T.); +#488161 = VERTEX_POINT('',#488162); +#488162 = CARTESIAN_POINT('',(143.5,-129.675,1.56)); +#488163 = CIRCLE('',#488164,0.225000087974); +#488164 = AXIS2_PLACEMENT_3D('',#488165,#488166,#488167); +#488165 = CARTESIAN_POINT('',(143.50000008797,-129.449999912,1.56)); +#488166 = DIRECTION('',(0.,0.,1.)); +#488167 = DIRECTION('',(-1.,-3.909955352945E-07,0.)); +#488168 = ORIENTED_EDGE('',*,*,#488169,.T.); +#488169 = EDGE_CURVE('',#488161,#488170,#488172,.T.); +#488170 = VERTEX_POINT('',#488171); +#488171 = CARTESIAN_POINT('',(144.,-129.675,1.56)); +#488172 = LINE('',#488173,#488174); +#488173 = CARTESIAN_POINT('',(143.5,-129.675,1.56)); +#488174 = VECTOR('',#488175,1.); +#488175 = DIRECTION('',(1.,0.,0.)); +#488176 = ORIENTED_EDGE('',*,*,#488177,.T.); +#488177 = EDGE_CURVE('',#488170,#488178,#488180,.T.); +#488178 = VERTEX_POINT('',#488179); +#488179 = CARTESIAN_POINT('',(144.225,-129.45,1.56)); +#488180 = CIRCLE('',#488181,0.225000087974); +#488181 = AXIS2_PLACEMENT_3D('',#488182,#488183,#488184); +#488182 = CARTESIAN_POINT('',(143.99999991202,-129.449999912,1.56)); +#488183 = DIRECTION('',(0.,0.,1.)); +#488184 = DIRECTION('',(3.909956616132E-07,-1.,0.)); +#488185 = ORIENTED_EDGE('',*,*,#488186,.T.); +#488186 = EDGE_CURVE('',#488178,#488125,#488187,.T.); +#488187 = LINE('',#488188,#488189); +#488188 = CARTESIAN_POINT('',(144.225,-129.45,1.56)); +#488189 = VECTOR('',#488190,1.); +#488190 = DIRECTION('',(0.,1.,0.)); +#488191 = FACE_BOUND('',#488192,.F.); +#488192 = EDGE_LOOP('',(#488193,#488204,#488212,#488221,#488229,#488238, + #488246,#488255)); +#488193 = ORIENTED_EDGE('',*,*,#488194,.T.); +#488194 = EDGE_CURVE('',#488195,#488197,#488199,.T.); +#488195 = VERTEX_POINT('',#488196); +#488196 = CARTESIAN_POINT('',(141.31,-128.88,1.56)); +#488197 = VERTEX_POINT('',#488198); +#488198 = CARTESIAN_POINT('',(141.17,-128.74,1.56)); +#488199 = CIRCLE('',#488200,0.139999827125); +#488200 = AXIS2_PLACEMENT_3D('',#488201,#488202,#488203); +#488201 = CARTESIAN_POINT('',(141.17000017287,-128.8799998271,1.56)); +#488202 = DIRECTION('',(0.,0.,1.)); +#488203 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#488204 = ORIENTED_EDGE('',*,*,#488205,.T.); +#488205 = EDGE_CURVE('',#488197,#488206,#488208,.T.); +#488206 = VERTEX_POINT('',#488207); +#488207 = CARTESIAN_POINT('',(140.83,-128.74,1.56)); +#488208 = LINE('',#488209,#488210); +#488209 = CARTESIAN_POINT('',(141.17,-128.74,1.56)); +#488210 = VECTOR('',#488211,1.); +#488211 = DIRECTION('',(-1.,0.,0.)); +#488212 = ORIENTED_EDGE('',*,*,#488213,.T.); +#488213 = EDGE_CURVE('',#488206,#488214,#488216,.T.); +#488214 = VERTEX_POINT('',#488215); +#488215 = CARTESIAN_POINT('',(140.69,-128.88,1.56)); +#488216 = CIRCLE('',#488217,0.139999827125); +#488217 = AXIS2_PLACEMENT_3D('',#488218,#488219,#488220); +#488218 = CARTESIAN_POINT('',(140.82999982712,-128.8799998271,1.56)); +#488219 = DIRECTION('',(0.,0.,1.)); +#488220 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#488221 = ORIENTED_EDGE('',*,*,#488222,.T.); +#488222 = EDGE_CURVE('',#488214,#488223,#488225,.T.); +#488223 = VERTEX_POINT('',#488224); +#488224 = CARTESIAN_POINT('',(140.69,-129.16,1.56)); +#488225 = LINE('',#488226,#488227); +#488226 = CARTESIAN_POINT('',(140.69,-128.88,1.56)); +#488227 = VECTOR('',#488228,1.); +#488228 = DIRECTION('',(0.,-1.,0.)); +#488229 = ORIENTED_EDGE('',*,*,#488230,.T.); +#488230 = EDGE_CURVE('',#488223,#488231,#488233,.T.); +#488231 = VERTEX_POINT('',#488232); +#488232 = CARTESIAN_POINT('',(140.83,-129.3,1.56)); +#488233 = CIRCLE('',#488234,0.139999827125); +#488234 = AXIS2_PLACEMENT_3D('',#488235,#488236,#488237); +#488235 = CARTESIAN_POINT('',(140.82999982712,-129.1600001728,1.56)); +#488236 = DIRECTION('',(0.,0.,1.)); +#488237 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#488238 = ORIENTED_EDGE('',*,*,#488239,.T.); +#488239 = EDGE_CURVE('',#488231,#488240,#488242,.T.); +#488240 = VERTEX_POINT('',#488241); +#488241 = CARTESIAN_POINT('',(141.17,-129.3,1.56)); +#488242 = LINE('',#488243,#488244); +#488243 = CARTESIAN_POINT('',(140.83,-129.3,1.56)); +#488244 = VECTOR('',#488245,1.); +#488245 = DIRECTION('',(1.,0.,0.)); +#488246 = ORIENTED_EDGE('',*,*,#488247,.T.); +#488247 = EDGE_CURVE('',#488240,#488248,#488250,.T.); +#488248 = VERTEX_POINT('',#488249); +#488249 = CARTESIAN_POINT('',(141.31,-129.16,1.56)); +#488250 = CIRCLE('',#488251,0.139999827125); +#488251 = AXIS2_PLACEMENT_3D('',#488252,#488253,#488254); +#488252 = CARTESIAN_POINT('',(141.17000017287,-129.1600001728,1.56)); +#488253 = DIRECTION('',(0.,0.,1.)); +#488254 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#488255 = ORIENTED_EDGE('',*,*,#488256,.T.); +#488256 = EDGE_CURVE('',#488248,#488195,#488257,.T.); +#488257 = LINE('',#488258,#488259); +#488258 = CARTESIAN_POINT('',(141.31,-129.16,1.56)); +#488259 = VECTOR('',#488260,1.); +#488260 = DIRECTION('',(0.,1.,0.)); +#488261 = FACE_BOUND('',#488262,.F.); +#488262 = EDGE_LOOP('',(#488263,#488274,#488282,#488291,#488299,#488308, + #488316,#488325)); +#488263 = ORIENTED_EDGE('',*,*,#488264,.T.); +#488264 = EDGE_CURVE('',#488265,#488267,#488269,.T.); +#488265 = VERTEX_POINT('',#488266); +#488266 = CARTESIAN_POINT('',(142.56,-128.88,1.56)); +#488267 = VERTEX_POINT('',#488268); +#488268 = CARTESIAN_POINT('',(142.42,-128.74,1.56)); +#488269 = CIRCLE('',#488270,0.139999827125); +#488270 = AXIS2_PLACEMENT_3D('',#488271,#488272,#488273); +#488271 = CARTESIAN_POINT('',(142.42000017287,-128.8799998271,1.56)); +#488272 = DIRECTION('',(0.,0.,1.)); +#488273 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#488274 = ORIENTED_EDGE('',*,*,#488275,.T.); +#488275 = EDGE_CURVE('',#488267,#488276,#488278,.T.); +#488276 = VERTEX_POINT('',#488277); +#488277 = CARTESIAN_POINT('',(142.08,-128.74,1.56)); +#488278 = LINE('',#488279,#488280); +#488279 = CARTESIAN_POINT('',(142.42,-128.74,1.56)); +#488280 = VECTOR('',#488281,1.); +#488281 = DIRECTION('',(-1.,0.,0.)); +#488282 = ORIENTED_EDGE('',*,*,#488283,.T.); +#488283 = EDGE_CURVE('',#488276,#488284,#488286,.T.); +#488284 = VERTEX_POINT('',#488285); +#488285 = CARTESIAN_POINT('',(141.94,-128.88,1.56)); +#488286 = CIRCLE('',#488287,0.139999827125); +#488287 = AXIS2_PLACEMENT_3D('',#488288,#488289,#488290); +#488288 = CARTESIAN_POINT('',(142.07999982712,-128.8799998271,1.56)); +#488289 = DIRECTION('',(0.,0.,1.)); +#488290 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#488291 = ORIENTED_EDGE('',*,*,#488292,.T.); +#488292 = EDGE_CURVE('',#488284,#488293,#488295,.T.); +#488293 = VERTEX_POINT('',#488294); +#488294 = CARTESIAN_POINT('',(141.94,-129.16,1.56)); +#488295 = LINE('',#488296,#488297); +#488296 = CARTESIAN_POINT('',(141.94,-128.88,1.56)); +#488297 = VECTOR('',#488298,1.); +#488298 = DIRECTION('',(0.,-1.,0.)); +#488299 = ORIENTED_EDGE('',*,*,#488300,.T.); +#488300 = EDGE_CURVE('',#488293,#488301,#488303,.T.); +#488301 = VERTEX_POINT('',#488302); +#488302 = CARTESIAN_POINT('',(142.08,-129.3,1.56)); +#488303 = CIRCLE('',#488304,0.139999827125); +#488304 = AXIS2_PLACEMENT_3D('',#488305,#488306,#488307); +#488305 = CARTESIAN_POINT('',(142.07999982712,-129.1600001728,1.56)); +#488306 = DIRECTION('',(0.,0.,1.)); +#488307 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#488308 = ORIENTED_EDGE('',*,*,#488309,.T.); +#488309 = EDGE_CURVE('',#488301,#488310,#488312,.T.); +#488310 = VERTEX_POINT('',#488311); +#488311 = CARTESIAN_POINT('',(142.42,-129.3,1.56)); +#488312 = LINE('',#488313,#488314); +#488313 = CARTESIAN_POINT('',(142.08,-129.3,1.56)); +#488314 = VECTOR('',#488315,1.); +#488315 = DIRECTION('',(1.,0.,0.)); +#488316 = ORIENTED_EDGE('',*,*,#488317,.T.); +#488317 = EDGE_CURVE('',#488310,#488318,#488320,.T.); +#488318 = VERTEX_POINT('',#488319); +#488319 = CARTESIAN_POINT('',(142.56,-129.16,1.56)); +#488320 = CIRCLE('',#488321,0.139999827125); +#488321 = AXIS2_PLACEMENT_3D('',#488322,#488323,#488324); +#488322 = CARTESIAN_POINT('',(142.42000017287,-129.1600001728,1.56)); +#488323 = DIRECTION('',(0.,0.,1.)); +#488324 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#488325 = ORIENTED_EDGE('',*,*,#488326,.T.); +#488326 = EDGE_CURVE('',#488318,#488265,#488327,.T.); +#488327 = LINE('',#488328,#488329); +#488328 = CARTESIAN_POINT('',(142.56,-129.16,1.56)); +#488329 = VECTOR('',#488330,1.); +#488330 = DIRECTION('',(0.,1.,0.)); +#488331 = FACE_BOUND('',#488332,.F.); +#488332 = EDGE_LOOP('',(#488333)); +#488333 = ORIENTED_EDGE('',*,*,#488334,.T.); +#488334 = EDGE_CURVE('',#488335,#488335,#488337,.T.); +#488335 = VERTEX_POINT('',#488336); +#488336 = CARTESIAN_POINT('',(152.299999,-127.3,1.56)); +#488337 = CIRCLE('',#488338,0.999999); +#488338 = AXIS2_PLACEMENT_3D('',#488339,#488340,#488341); +#488339 = CARTESIAN_POINT('',(151.3,-127.3,1.56)); +#488340 = DIRECTION('',(0.,0.,1.)); +#488341 = DIRECTION('',(1.,0.,-0.)); +#488342 = FACE_BOUND('',#488343,.F.); +#488343 = EDGE_LOOP('',(#488344)); +#488344 = ORIENTED_EDGE('',*,*,#488345,.T.); +#488345 = EDGE_CURVE('',#488346,#488346,#488348,.T.); +#488346 = VERTEX_POINT('',#488347); +#488347 = CARTESIAN_POINT('',(124.7155,-127.5,1.56)); +#488348 = CIRCLE('',#488349,0.7155); +#488349 = AXIS2_PLACEMENT_3D('',#488350,#488351,#488352); +#488350 = CARTESIAN_POINT('',(124.,-127.5,1.56)); +#488351 = DIRECTION('',(0.,0.,1.)); +#488352 = DIRECTION('',(1.,0.,-0.)); +#488353 = FACE_BOUND('',#488354,.F.); +#488354 = EDGE_LOOP('',(#488355)); +#488355 = ORIENTED_EDGE('',*,*,#488356,.T.); +#488356 = EDGE_CURVE('',#488357,#488357,#488359,.T.); +#488357 = VERTEX_POINT('',#488358); +#488358 = CARTESIAN_POINT('',(126.7155,-127.5,1.56)); +#488359 = CIRCLE('',#488360,0.7155); +#488360 = AXIS2_PLACEMENT_3D('',#488361,#488362,#488363); +#488361 = CARTESIAN_POINT('',(126.,-127.5,1.56)); +#488362 = DIRECTION('',(0.,0.,1.)); +#488363 = DIRECTION('',(1.,0.,-0.)); +#488364 = FACE_BOUND('',#488365,.F.); +#488365 = EDGE_LOOP('',(#488366)); +#488366 = ORIENTED_EDGE('',*,*,#488367,.T.); +#488367 = EDGE_CURVE('',#488368,#488368,#488370,.T.); +#488368 = VERTEX_POINT('',#488369); +#488369 = CARTESIAN_POINT('',(128.7155,-127.5,1.56)); +#488370 = CIRCLE('',#488371,0.7155); +#488371 = AXIS2_PLACEMENT_3D('',#488372,#488373,#488374); +#488372 = CARTESIAN_POINT('',(128.,-127.5,1.56)); +#488373 = DIRECTION('',(0.,0.,1.)); +#488374 = DIRECTION('',(1.,0.,-0.)); +#488375 = FACE_BOUND('',#488376,.F.); +#488376 = EDGE_LOOP('',(#488377)); +#488377 = ORIENTED_EDGE('',*,*,#488378,.T.); +#488378 = EDGE_CURVE('',#488379,#488379,#488381,.T.); +#488379 = VERTEX_POINT('',#488380); +#488380 = CARTESIAN_POINT('',(130.7155,-127.5,1.56)); +#488381 = CIRCLE('',#488382,0.7155); +#488382 = AXIS2_PLACEMENT_3D('',#488383,#488384,#488385); +#488383 = CARTESIAN_POINT('',(130.,-127.5,1.56)); +#488384 = DIRECTION('',(0.,0.,1.)); +#488385 = DIRECTION('',(1.,0.,-0.)); +#488386 = FACE_BOUND('',#488387,.F.); +#488387 = EDGE_LOOP('',(#488388)); +#488388 = ORIENTED_EDGE('',*,*,#488389,.T.); +#488389 = EDGE_CURVE('',#488390,#488390,#488392,.T.); +#488390 = VERTEX_POINT('',#488391); +#488391 = CARTESIAN_POINT('',(132.7155,-127.5,1.56)); +#488392 = CIRCLE('',#488393,0.7155); +#488393 = AXIS2_PLACEMENT_3D('',#488394,#488395,#488396); +#488394 = CARTESIAN_POINT('',(132.,-127.5,1.56)); +#488395 = DIRECTION('',(0.,0.,1.)); +#488396 = DIRECTION('',(1.,0.,-0.)); +#488397 = FACE_BOUND('',#488398,.F.); +#488398 = EDGE_LOOP('',(#488399)); +#488399 = ORIENTED_EDGE('',*,*,#488400,.T.); +#488400 = EDGE_CURVE('',#488401,#488401,#488403,.T.); +#488401 = VERTEX_POINT('',#488402); +#488402 = CARTESIAN_POINT('',(134.7155,-127.5,1.56)); +#488403 = CIRCLE('',#488404,0.7155); +#488404 = AXIS2_PLACEMENT_3D('',#488405,#488406,#488407); +#488405 = CARTESIAN_POINT('',(134.,-127.5,1.56)); +#488406 = DIRECTION('',(0.,0.,1.)); +#488407 = DIRECTION('',(1.,0.,-0.)); +#488408 = FACE_BOUND('',#488409,.F.); +#488409 = EDGE_LOOP('',(#488410)); +#488410 = ORIENTED_EDGE('',*,*,#488411,.T.); +#488411 = EDGE_CURVE('',#488412,#488412,#488414,.T.); +#488412 = VERTEX_POINT('',#488413); +#488413 = CARTESIAN_POINT('',(136.7155,-127.5,1.56)); +#488414 = CIRCLE('',#488415,0.7155); +#488415 = AXIS2_PLACEMENT_3D('',#488416,#488417,#488418); +#488416 = CARTESIAN_POINT('',(136.,-127.5,1.56)); +#488417 = DIRECTION('',(0.,0.,1.)); +#488418 = DIRECTION('',(1.,0.,-0.)); +#488419 = FACE_BOUND('',#488420,.F.); +#488420 = EDGE_LOOP('',(#488421)); +#488421 = ORIENTED_EDGE('',*,*,#488422,.T.); +#488422 = EDGE_CURVE('',#488423,#488423,#488425,.T.); +#488423 = VERTEX_POINT('',#488424); +#488424 = CARTESIAN_POINT('',(138.7155,-127.5,1.56)); +#488425 = CIRCLE('',#488426,0.7155); +#488426 = AXIS2_PLACEMENT_3D('',#488427,#488428,#488429); +#488427 = CARTESIAN_POINT('',(138.,-127.5,1.56)); +#488428 = DIRECTION('',(0.,0.,1.)); +#488429 = DIRECTION('',(1.,0.,-0.)); +#488430 = FACE_BOUND('',#488431,.F.); +#488431 = EDGE_LOOP('',(#488432)); +#488432 = ORIENTED_EDGE('',*,*,#488433,.T.); +#488433 = EDGE_CURVE('',#488434,#488434,#488436,.T.); +#488434 = VERTEX_POINT('',#488435); +#488435 = CARTESIAN_POINT('',(140.7155,-127.5,1.56)); +#488436 = CIRCLE('',#488437,0.7155); +#488437 = AXIS2_PLACEMENT_3D('',#488438,#488439,#488440); +#488438 = CARTESIAN_POINT('',(140.,-127.5,1.56)); +#488439 = DIRECTION('',(0.,0.,1.)); +#488440 = DIRECTION('',(1.,0.,-0.)); +#488441 = FACE_BOUND('',#488442,.F.); +#488442 = EDGE_LOOP('',(#488443)); +#488443 = ORIENTED_EDGE('',*,*,#488444,.T.); +#488444 = EDGE_CURVE('',#488445,#488445,#488447,.T.); +#488445 = VERTEX_POINT('',#488446); +#488446 = CARTESIAN_POINT('',(142.7155,-127.5,1.56)); +#488447 = CIRCLE('',#488448,0.7155); +#488448 = AXIS2_PLACEMENT_3D('',#488449,#488450,#488451); +#488449 = CARTESIAN_POINT('',(142.,-127.5,1.56)); +#488450 = DIRECTION('',(0.,0.,1.)); +#488451 = DIRECTION('',(1.,0.,-0.)); +#488452 = FACE_BOUND('',#488453,.F.); +#488453 = EDGE_LOOP('',(#488454,#488465,#488473,#488482,#488490,#488499, + #488507,#488516)); +#488454 = ORIENTED_EDGE('',*,*,#488455,.T.); +#488455 = EDGE_CURVE('',#488456,#488458,#488460,.T.); +#488456 = VERTEX_POINT('',#488457); +#488457 = CARTESIAN_POINT('',(125.25,-120.75,1.56)); +#488458 = VERTEX_POINT('',#488459); +#488459 = CARTESIAN_POINT('',(124.75,-120.25,1.56)); +#488460 = CIRCLE('',#488461,0.500001333575); +#488461 = AXIS2_PLACEMENT_3D('',#488462,#488463,#488464); +#488462 = CARTESIAN_POINT('',(124.74999866642,-120.7500013335,1.56)); +#488463 = DIRECTION('',(0.,0.,1.)); +#488464 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488465 = ORIENTED_EDGE('',*,*,#488466,.T.); +#488466 = EDGE_CURVE('',#488458,#488467,#488469,.T.); +#488467 = VERTEX_POINT('',#488468); +#488468 = CARTESIAN_POINT('',(123.75,-120.25,1.56)); +#488469 = LINE('',#488470,#488471); +#488470 = CARTESIAN_POINT('',(124.75,-120.25,1.56)); +#488471 = VECTOR('',#488472,1.); +#488472 = DIRECTION('',(-1.,0.,0.)); +#488473 = ORIENTED_EDGE('',*,*,#488474,.T.); +#488474 = EDGE_CURVE('',#488467,#488475,#488477,.T.); +#488475 = VERTEX_POINT('',#488476); +#488476 = CARTESIAN_POINT('',(123.25,-120.75,1.56)); +#488477 = CIRCLE('',#488478,0.500001333575); +#488478 = AXIS2_PLACEMENT_3D('',#488479,#488480,#488481); +#488479 = CARTESIAN_POINT('',(123.75000133357,-120.7500013335,1.56)); +#488480 = DIRECTION('',(0.,0.,1.)); +#488481 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488482 = ORIENTED_EDGE('',*,*,#488483,.T.); +#488483 = EDGE_CURVE('',#488475,#488484,#488486,.T.); +#488484 = VERTEX_POINT('',#488485); +#488485 = CARTESIAN_POINT('',(123.25,-121.75,1.56)); +#488486 = LINE('',#488487,#488488); +#488487 = CARTESIAN_POINT('',(123.25,-120.75,1.56)); +#488488 = VECTOR('',#488489,1.); +#488489 = DIRECTION('',(0.,-1.,0.)); +#488490 = ORIENTED_EDGE('',*,*,#488491,.T.); +#488491 = EDGE_CURVE('',#488484,#488492,#488494,.T.); +#488492 = VERTEX_POINT('',#488493); +#488493 = CARTESIAN_POINT('',(123.75,-122.25,1.56)); +#488494 = CIRCLE('',#488495,0.500001333575); +#488495 = AXIS2_PLACEMENT_3D('',#488496,#488497,#488498); +#488496 = CARTESIAN_POINT('',(123.75000133357,-121.7499986664,1.56)); +#488497 = DIRECTION('',(0.,0.,1.)); +#488498 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488499 = ORIENTED_EDGE('',*,*,#488500,.T.); +#488500 = EDGE_CURVE('',#488492,#488501,#488503,.T.); +#488501 = VERTEX_POINT('',#488502); +#488502 = CARTESIAN_POINT('',(124.75,-122.25,1.56)); +#488503 = LINE('',#488504,#488505); +#488504 = CARTESIAN_POINT('',(123.75,-122.25,1.56)); +#488505 = VECTOR('',#488506,1.); +#488506 = DIRECTION('',(1.,0.,0.)); +#488507 = ORIENTED_EDGE('',*,*,#488508,.T.); +#488508 = EDGE_CURVE('',#488501,#488509,#488511,.T.); +#488509 = VERTEX_POINT('',#488510); +#488510 = CARTESIAN_POINT('',(125.25,-121.75,1.56)); +#488511 = CIRCLE('',#488512,0.500001333575); +#488512 = AXIS2_PLACEMENT_3D('',#488513,#488514,#488515); +#488513 = CARTESIAN_POINT('',(124.74999866642,-121.7499986664,1.56)); +#488514 = DIRECTION('',(0.,0.,1.)); +#488515 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488516 = ORIENTED_EDGE('',*,*,#488517,.T.); +#488517 = EDGE_CURVE('',#488509,#488456,#488518,.T.); +#488518 = LINE('',#488519,#488520); +#488519 = CARTESIAN_POINT('',(125.25,-121.75,1.56)); +#488520 = VECTOR('',#488521,1.); +#488521 = DIRECTION('',(0.,1.,0.)); +#488522 = FACE_BOUND('',#488523,.F.); +#488523 = EDGE_LOOP('',(#488524,#488535,#488543,#488552,#488560,#488569, + #488577,#488586)); +#488524 = ORIENTED_EDGE('',*,*,#488525,.T.); +#488525 = EDGE_CURVE('',#488526,#488528,#488530,.T.); +#488526 = VERTEX_POINT('',#488527); +#488527 = CARTESIAN_POINT('',(131.25,-120.75,1.56)); +#488528 = VERTEX_POINT('',#488529); +#488529 = CARTESIAN_POINT('',(130.75,-120.25,1.56)); +#488530 = CIRCLE('',#488531,0.500001333575); +#488531 = AXIS2_PLACEMENT_3D('',#488532,#488533,#488534); +#488532 = CARTESIAN_POINT('',(130.74999866642,-120.7500013335,1.56)); +#488533 = DIRECTION('',(0.,0.,1.)); +#488534 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488535 = ORIENTED_EDGE('',*,*,#488536,.T.); +#488536 = EDGE_CURVE('',#488528,#488537,#488539,.T.); +#488537 = VERTEX_POINT('',#488538); +#488538 = CARTESIAN_POINT('',(129.75,-120.25,1.56)); +#488539 = LINE('',#488540,#488541); +#488540 = CARTESIAN_POINT('',(130.75,-120.25,1.56)); +#488541 = VECTOR('',#488542,1.); +#488542 = DIRECTION('',(-1.,0.,0.)); +#488543 = ORIENTED_EDGE('',*,*,#488544,.T.); +#488544 = EDGE_CURVE('',#488537,#488545,#488547,.T.); +#488545 = VERTEX_POINT('',#488546); +#488546 = CARTESIAN_POINT('',(129.25,-120.75,1.56)); +#488547 = CIRCLE('',#488548,0.500001333575); +#488548 = AXIS2_PLACEMENT_3D('',#488549,#488550,#488551); +#488549 = CARTESIAN_POINT('',(129.75000133357,-120.7500013335,1.56)); +#488550 = DIRECTION('',(0.,0.,1.)); +#488551 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488552 = ORIENTED_EDGE('',*,*,#488553,.T.); +#488553 = EDGE_CURVE('',#488545,#488554,#488556,.T.); +#488554 = VERTEX_POINT('',#488555); +#488555 = CARTESIAN_POINT('',(129.25,-121.75,1.56)); +#488556 = LINE('',#488557,#488558); +#488557 = CARTESIAN_POINT('',(129.25,-120.75,1.56)); +#488558 = VECTOR('',#488559,1.); +#488559 = DIRECTION('',(0.,-1.,0.)); +#488560 = ORIENTED_EDGE('',*,*,#488561,.T.); +#488561 = EDGE_CURVE('',#488554,#488562,#488564,.T.); +#488562 = VERTEX_POINT('',#488563); +#488563 = CARTESIAN_POINT('',(129.75,-122.25,1.56)); +#488564 = CIRCLE('',#488565,0.500001333575); +#488565 = AXIS2_PLACEMENT_3D('',#488566,#488567,#488568); +#488566 = CARTESIAN_POINT('',(129.75000133357,-121.7499986664,1.56)); +#488567 = DIRECTION('',(0.,0.,1.)); +#488568 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488569 = ORIENTED_EDGE('',*,*,#488570,.T.); +#488570 = EDGE_CURVE('',#488562,#488571,#488573,.T.); +#488571 = VERTEX_POINT('',#488572); +#488572 = CARTESIAN_POINT('',(130.75,-122.25,1.56)); +#488573 = LINE('',#488574,#488575); +#488574 = CARTESIAN_POINT('',(129.75,-122.25,1.56)); +#488575 = VECTOR('',#488576,1.); +#488576 = DIRECTION('',(1.,0.,0.)); +#488577 = ORIENTED_EDGE('',*,*,#488578,.T.); +#488578 = EDGE_CURVE('',#488571,#488579,#488581,.T.); +#488579 = VERTEX_POINT('',#488580); +#488580 = CARTESIAN_POINT('',(131.25,-121.75,1.56)); +#488581 = CIRCLE('',#488582,0.500001333575); +#488582 = AXIS2_PLACEMENT_3D('',#488583,#488584,#488585); +#488583 = CARTESIAN_POINT('',(130.74999866642,-121.7499986664,1.56)); +#488584 = DIRECTION('',(0.,0.,1.)); +#488585 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488586 = ORIENTED_EDGE('',*,*,#488587,.T.); +#488587 = EDGE_CURVE('',#488579,#488526,#488588,.T.); +#488588 = LINE('',#488589,#488590); +#488589 = CARTESIAN_POINT('',(131.25,-121.75,1.56)); +#488590 = VECTOR('',#488591,1.); +#488591 = DIRECTION('',(0.,1.,0.)); +#488592 = FACE_BOUND('',#488593,.F.); +#488593 = EDGE_LOOP('',(#488594,#488605,#488613,#488622,#488630,#488639, + #488647,#488656)); +#488594 = ORIENTED_EDGE('',*,*,#488595,.T.); +#488595 = EDGE_CURVE('',#488596,#488598,#488600,.T.); +#488596 = VERTEX_POINT('',#488597); +#488597 = CARTESIAN_POINT('',(135.5,-120.75,1.56)); +#488598 = VERTEX_POINT('',#488599); +#488599 = CARTESIAN_POINT('',(135.,-120.25,1.56)); +#488600 = CIRCLE('',#488601,0.500001333575); +#488601 = AXIS2_PLACEMENT_3D('',#488602,#488603,#488604); +#488602 = CARTESIAN_POINT('',(134.99999866642,-120.7500013335,1.56)); +#488603 = DIRECTION('',(0.,0.,1.)); +#488604 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488605 = ORIENTED_EDGE('',*,*,#488606,.T.); +#488606 = EDGE_CURVE('',#488598,#488607,#488609,.T.); +#488607 = VERTEX_POINT('',#488608); +#488608 = CARTESIAN_POINT('',(134.,-120.25,1.56)); +#488609 = LINE('',#488610,#488611); +#488610 = CARTESIAN_POINT('',(135.,-120.25,1.56)); +#488611 = VECTOR('',#488612,1.); +#488612 = DIRECTION('',(-1.,0.,0.)); +#488613 = ORIENTED_EDGE('',*,*,#488614,.T.); +#488614 = EDGE_CURVE('',#488607,#488615,#488617,.T.); +#488615 = VERTEX_POINT('',#488616); +#488616 = CARTESIAN_POINT('',(133.5,-120.75,1.56)); +#488617 = CIRCLE('',#488618,0.500001333575); +#488618 = AXIS2_PLACEMENT_3D('',#488619,#488620,#488621); +#488619 = CARTESIAN_POINT('',(134.00000133357,-120.7500013335,1.56)); +#488620 = DIRECTION('',(0.,0.,1.)); +#488621 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488622 = ORIENTED_EDGE('',*,*,#488623,.T.); +#488623 = EDGE_CURVE('',#488615,#488624,#488626,.T.); +#488624 = VERTEX_POINT('',#488625); +#488625 = CARTESIAN_POINT('',(133.5,-121.75,1.56)); +#488626 = LINE('',#488627,#488628); +#488627 = CARTESIAN_POINT('',(133.5,-120.75,1.56)); +#488628 = VECTOR('',#488629,1.); +#488629 = DIRECTION('',(0.,-1.,0.)); +#488630 = ORIENTED_EDGE('',*,*,#488631,.T.); +#488631 = EDGE_CURVE('',#488624,#488632,#488634,.T.); +#488632 = VERTEX_POINT('',#488633); +#488633 = CARTESIAN_POINT('',(134.,-122.25,1.56)); +#488634 = CIRCLE('',#488635,0.500001333575); +#488635 = AXIS2_PLACEMENT_3D('',#488636,#488637,#488638); +#488636 = CARTESIAN_POINT('',(134.00000133357,-121.7499986664,1.56)); +#488637 = DIRECTION('',(0.,0.,1.)); +#488638 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488639 = ORIENTED_EDGE('',*,*,#488640,.T.); +#488640 = EDGE_CURVE('',#488632,#488641,#488643,.T.); +#488641 = VERTEX_POINT('',#488642); +#488642 = CARTESIAN_POINT('',(135.,-122.25,1.56)); +#488643 = LINE('',#488644,#488645); +#488644 = CARTESIAN_POINT('',(134.,-122.25,1.56)); +#488645 = VECTOR('',#488646,1.); +#488646 = DIRECTION('',(1.,0.,0.)); +#488647 = ORIENTED_EDGE('',*,*,#488648,.T.); +#488648 = EDGE_CURVE('',#488641,#488649,#488651,.T.); +#488649 = VERTEX_POINT('',#488650); +#488650 = CARTESIAN_POINT('',(135.5,-121.75,1.56)); +#488651 = CIRCLE('',#488652,0.500001333575); +#488652 = AXIS2_PLACEMENT_3D('',#488653,#488654,#488655); +#488653 = CARTESIAN_POINT('',(134.99999866642,-121.7499986664,1.56)); +#488654 = DIRECTION('',(0.,0.,1.)); +#488655 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488656 = ORIENTED_EDGE('',*,*,#488657,.T.); +#488657 = EDGE_CURVE('',#488649,#488596,#488658,.T.); +#488658 = LINE('',#488659,#488660); +#488659 = CARTESIAN_POINT('',(135.5,-121.75,1.56)); +#488660 = VECTOR('',#488661,1.); +#488661 = DIRECTION('',(0.,1.,0.)); +#488662 = FACE_BOUND('',#488663,.F.); +#488663 = EDGE_LOOP('',(#488664,#488675,#488683,#488692,#488700,#488709, + #488717,#488726)); +#488664 = ORIENTED_EDGE('',*,*,#488665,.T.); +#488665 = EDGE_CURVE('',#488666,#488668,#488670,.T.); +#488666 = VERTEX_POINT('',#488667); +#488667 = CARTESIAN_POINT('',(141.5,-120.75,1.56)); +#488668 = VERTEX_POINT('',#488669); +#488669 = CARTESIAN_POINT('',(141.,-120.25,1.56)); +#488670 = CIRCLE('',#488671,0.500001333575); +#488671 = AXIS2_PLACEMENT_3D('',#488672,#488673,#488674); +#488672 = CARTESIAN_POINT('',(140.99999866642,-120.7500013335,1.56)); +#488673 = DIRECTION('',(0.,0.,1.)); +#488674 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488675 = ORIENTED_EDGE('',*,*,#488676,.T.); +#488676 = EDGE_CURVE('',#488668,#488677,#488679,.T.); +#488677 = VERTEX_POINT('',#488678); +#488678 = CARTESIAN_POINT('',(140.,-120.25,1.56)); +#488679 = LINE('',#488680,#488681); +#488680 = CARTESIAN_POINT('',(141.,-120.25,1.56)); +#488681 = VECTOR('',#488682,1.); +#488682 = DIRECTION('',(-1.,0.,0.)); +#488683 = ORIENTED_EDGE('',*,*,#488684,.T.); +#488684 = EDGE_CURVE('',#488677,#488685,#488687,.T.); +#488685 = VERTEX_POINT('',#488686); +#488686 = CARTESIAN_POINT('',(139.5,-120.75,1.56)); +#488687 = CIRCLE('',#488688,0.500001333575); +#488688 = AXIS2_PLACEMENT_3D('',#488689,#488690,#488691); +#488689 = CARTESIAN_POINT('',(140.00000133357,-120.7500013335,1.56)); +#488690 = DIRECTION('',(0.,0.,1.)); +#488691 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488692 = ORIENTED_EDGE('',*,*,#488693,.T.); +#488693 = EDGE_CURVE('',#488685,#488694,#488696,.T.); +#488694 = VERTEX_POINT('',#488695); +#488695 = CARTESIAN_POINT('',(139.5,-121.75,1.56)); +#488696 = LINE('',#488697,#488698); +#488697 = CARTESIAN_POINT('',(139.5,-120.75,1.56)); +#488698 = VECTOR('',#488699,1.); +#488699 = DIRECTION('',(0.,-1.,0.)); +#488700 = ORIENTED_EDGE('',*,*,#488701,.T.); +#488701 = EDGE_CURVE('',#488694,#488702,#488704,.T.); +#488702 = VERTEX_POINT('',#488703); +#488703 = CARTESIAN_POINT('',(140.,-122.25,1.56)); +#488704 = CIRCLE('',#488705,0.500001333575); +#488705 = AXIS2_PLACEMENT_3D('',#488706,#488707,#488708); +#488706 = CARTESIAN_POINT('',(140.00000133357,-121.7499986664,1.56)); +#488707 = DIRECTION('',(0.,0.,1.)); +#488708 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488709 = ORIENTED_EDGE('',*,*,#488710,.T.); +#488710 = EDGE_CURVE('',#488702,#488711,#488713,.T.); +#488711 = VERTEX_POINT('',#488712); +#488712 = CARTESIAN_POINT('',(141.,-122.25,1.56)); +#488713 = LINE('',#488714,#488715); +#488714 = CARTESIAN_POINT('',(140.,-122.25,1.56)); +#488715 = VECTOR('',#488716,1.); +#488716 = DIRECTION('',(1.,0.,0.)); +#488717 = ORIENTED_EDGE('',*,*,#488718,.T.); +#488718 = EDGE_CURVE('',#488711,#488719,#488721,.T.); +#488719 = VERTEX_POINT('',#488720); +#488720 = CARTESIAN_POINT('',(141.5,-121.75,1.56)); +#488721 = CIRCLE('',#488722,0.500001333575); +#488722 = AXIS2_PLACEMENT_3D('',#488723,#488724,#488725); +#488723 = CARTESIAN_POINT('',(140.99999866642,-121.7499986664,1.56)); +#488724 = DIRECTION('',(0.,0.,1.)); +#488725 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488726 = ORIENTED_EDGE('',*,*,#488727,.T.); +#488727 = EDGE_CURVE('',#488719,#488666,#488728,.T.); +#488728 = LINE('',#488729,#488730); +#488729 = CARTESIAN_POINT('',(141.5,-121.75,1.56)); +#488730 = VECTOR('',#488731,1.); +#488731 = DIRECTION('',(0.,1.,0.)); +#488732 = FACE_BOUND('',#488733,.F.); +#488733 = EDGE_LOOP('',(#488734,#488745,#488753,#488762,#488770,#488779, + #488787,#488796)); +#488734 = ORIENTED_EDGE('',*,*,#488735,.T.); +#488735 = EDGE_CURVE('',#488736,#488738,#488740,.T.); +#488736 = VERTEX_POINT('',#488737); +#488737 = CARTESIAN_POINT('',(145.75,-120.75,1.56)); +#488738 = VERTEX_POINT('',#488739); +#488739 = CARTESIAN_POINT('',(145.25,-120.25,1.56)); +#488740 = CIRCLE('',#488741,0.500001333575); +#488741 = AXIS2_PLACEMENT_3D('',#488742,#488743,#488744); +#488742 = CARTESIAN_POINT('',(145.24999866642,-120.7500013335,1.56)); +#488743 = DIRECTION('',(0.,0.,1.)); +#488744 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488745 = ORIENTED_EDGE('',*,*,#488746,.T.); +#488746 = EDGE_CURVE('',#488738,#488747,#488749,.T.); +#488747 = VERTEX_POINT('',#488748); +#488748 = CARTESIAN_POINT('',(144.25,-120.25,1.56)); +#488749 = LINE('',#488750,#488751); +#488750 = CARTESIAN_POINT('',(145.25,-120.25,1.56)); +#488751 = VECTOR('',#488752,1.); +#488752 = DIRECTION('',(-1.,0.,0.)); +#488753 = ORIENTED_EDGE('',*,*,#488754,.T.); +#488754 = EDGE_CURVE('',#488747,#488755,#488757,.T.); +#488755 = VERTEX_POINT('',#488756); +#488756 = CARTESIAN_POINT('',(143.75,-120.75,1.56)); +#488757 = CIRCLE('',#488758,0.500001333575); +#488758 = AXIS2_PLACEMENT_3D('',#488759,#488760,#488761); +#488759 = CARTESIAN_POINT('',(144.25000133357,-120.7500013335,1.56)); +#488760 = DIRECTION('',(0.,0.,1.)); +#488761 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488762 = ORIENTED_EDGE('',*,*,#488763,.T.); +#488763 = EDGE_CURVE('',#488755,#488764,#488766,.T.); +#488764 = VERTEX_POINT('',#488765); +#488765 = CARTESIAN_POINT('',(143.75,-121.75,1.56)); +#488766 = LINE('',#488767,#488768); +#488767 = CARTESIAN_POINT('',(143.75,-120.75,1.56)); +#488768 = VECTOR('',#488769,1.); +#488769 = DIRECTION('',(0.,-1.,0.)); +#488770 = ORIENTED_EDGE('',*,*,#488771,.T.); +#488771 = EDGE_CURVE('',#488764,#488772,#488774,.T.); +#488772 = VERTEX_POINT('',#488773); +#488773 = CARTESIAN_POINT('',(144.25,-122.25,1.56)); +#488774 = CIRCLE('',#488775,0.500001333575); +#488775 = AXIS2_PLACEMENT_3D('',#488776,#488777,#488778); +#488776 = CARTESIAN_POINT('',(144.25000133357,-121.7499986664,1.56)); +#488777 = DIRECTION('',(0.,0.,1.)); +#488778 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488779 = ORIENTED_EDGE('',*,*,#488780,.T.); +#488780 = EDGE_CURVE('',#488772,#488781,#488783,.T.); +#488781 = VERTEX_POINT('',#488782); +#488782 = CARTESIAN_POINT('',(145.25,-122.25,1.56)); +#488783 = LINE('',#488784,#488785); +#488784 = CARTESIAN_POINT('',(144.25,-122.25,1.56)); +#488785 = VECTOR('',#488786,1.); +#488786 = DIRECTION('',(1.,0.,0.)); +#488787 = ORIENTED_EDGE('',*,*,#488788,.T.); +#488788 = EDGE_CURVE('',#488781,#488789,#488791,.T.); +#488789 = VERTEX_POINT('',#488790); +#488790 = CARTESIAN_POINT('',(145.75,-121.75,1.56)); +#488791 = CIRCLE('',#488792,0.500001333575); +#488792 = AXIS2_PLACEMENT_3D('',#488793,#488794,#488795); +#488793 = CARTESIAN_POINT('',(145.24999866642,-121.7499986664,1.56)); +#488794 = DIRECTION('',(0.,0.,1.)); +#488795 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488796 = ORIENTED_EDGE('',*,*,#488797,.T.); +#488797 = EDGE_CURVE('',#488789,#488736,#488798,.T.); +#488798 = LINE('',#488799,#488800); +#488799 = CARTESIAN_POINT('',(145.75,-121.75,1.56)); +#488800 = VECTOR('',#488801,1.); +#488801 = DIRECTION('',(0.,1.,0.)); +#488802 = FACE_BOUND('',#488803,.F.); +#488803 = EDGE_LOOP('',(#488804,#488815,#488823,#488832,#488840,#488849, + #488857,#488866)); +#488804 = ORIENTED_EDGE('',*,*,#488805,.T.); +#488805 = EDGE_CURVE('',#488806,#488808,#488810,.T.); +#488806 = VERTEX_POINT('',#488807); +#488807 = CARTESIAN_POINT('',(151.75,-120.75,1.56)); +#488808 = VERTEX_POINT('',#488809); +#488809 = CARTESIAN_POINT('',(151.25,-120.25,1.56)); +#488810 = CIRCLE('',#488811,0.500001333575); +#488811 = AXIS2_PLACEMENT_3D('',#488812,#488813,#488814); +#488812 = CARTESIAN_POINT('',(151.24999866642,-120.7500013335,1.56)); +#488813 = DIRECTION('',(0.,0.,1.)); +#488814 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488815 = ORIENTED_EDGE('',*,*,#488816,.T.); +#488816 = EDGE_CURVE('',#488808,#488817,#488819,.T.); +#488817 = VERTEX_POINT('',#488818); +#488818 = CARTESIAN_POINT('',(150.25,-120.25,1.56)); +#488819 = LINE('',#488820,#488821); +#488820 = CARTESIAN_POINT('',(151.25,-120.25,1.56)); +#488821 = VECTOR('',#488822,1.); +#488822 = DIRECTION('',(-1.,0.,0.)); +#488823 = ORIENTED_EDGE('',*,*,#488824,.T.); +#488824 = EDGE_CURVE('',#488817,#488825,#488827,.T.); +#488825 = VERTEX_POINT('',#488826); +#488826 = CARTESIAN_POINT('',(149.75,-120.75,1.56)); +#488827 = CIRCLE('',#488828,0.500001333575); +#488828 = AXIS2_PLACEMENT_3D('',#488829,#488830,#488831); +#488829 = CARTESIAN_POINT('',(150.25000133357,-120.7500013335,1.56)); +#488830 = DIRECTION('',(0.,0.,1.)); +#488831 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488832 = ORIENTED_EDGE('',*,*,#488833,.T.); +#488833 = EDGE_CURVE('',#488825,#488834,#488836,.T.); +#488834 = VERTEX_POINT('',#488835); +#488835 = CARTESIAN_POINT('',(149.75,-121.75,1.56)); +#488836 = LINE('',#488837,#488838); +#488837 = CARTESIAN_POINT('',(149.75,-120.75,1.56)); +#488838 = VECTOR('',#488839,1.); +#488839 = DIRECTION('',(0.,-1.,0.)); +#488840 = ORIENTED_EDGE('',*,*,#488841,.T.); +#488841 = EDGE_CURVE('',#488834,#488842,#488844,.T.); +#488842 = VERTEX_POINT('',#488843); +#488843 = CARTESIAN_POINT('',(150.25,-122.25,1.56)); +#488844 = CIRCLE('',#488845,0.500001333575); +#488845 = AXIS2_PLACEMENT_3D('',#488846,#488847,#488848); +#488846 = CARTESIAN_POINT('',(150.25000133357,-121.7499986664,1.56)); +#488847 = DIRECTION('',(0.,0.,1.)); +#488848 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488849 = ORIENTED_EDGE('',*,*,#488850,.T.); +#488850 = EDGE_CURVE('',#488842,#488851,#488853,.T.); +#488851 = VERTEX_POINT('',#488852); +#488852 = CARTESIAN_POINT('',(151.25,-122.25,1.56)); +#488853 = LINE('',#488854,#488855); +#488854 = CARTESIAN_POINT('',(150.25,-122.25,1.56)); +#488855 = VECTOR('',#488856,1.); +#488856 = DIRECTION('',(1.,0.,0.)); +#488857 = ORIENTED_EDGE('',*,*,#488858,.T.); +#488858 = EDGE_CURVE('',#488851,#488859,#488861,.T.); +#488859 = VERTEX_POINT('',#488860); +#488860 = CARTESIAN_POINT('',(151.75,-121.75,1.56)); +#488861 = CIRCLE('',#488862,0.500001333575); +#488862 = AXIS2_PLACEMENT_3D('',#488863,#488864,#488865); +#488863 = CARTESIAN_POINT('',(151.24999866642,-121.7499986664,1.56)); +#488864 = DIRECTION('',(0.,0.,1.)); +#488865 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488866 = ORIENTED_EDGE('',*,*,#488867,.T.); +#488867 = EDGE_CURVE('',#488859,#488806,#488868,.T.); +#488868 = LINE('',#488869,#488870); +#488869 = CARTESIAN_POINT('',(151.75,-121.75,1.56)); +#488870 = VECTOR('',#488871,1.); +#488871 = DIRECTION('',(0.,1.,0.)); +#488872 = FACE_BOUND('',#488873,.F.); +#488873 = EDGE_LOOP('',(#488874,#488885,#488893,#488902,#488910,#488919, + #488927,#488936)); +#488874 = ORIENTED_EDGE('',*,*,#488875,.T.); +#488875 = EDGE_CURVE('',#488876,#488878,#488880,.T.); +#488876 = VERTEX_POINT('',#488877); +#488877 = CARTESIAN_POINT('',(125.25,-112.,1.56)); +#488878 = VERTEX_POINT('',#488879); +#488879 = CARTESIAN_POINT('',(124.75,-111.5,1.56)); +#488880 = CIRCLE('',#488881,0.500001333575); +#488881 = AXIS2_PLACEMENT_3D('',#488882,#488883,#488884); +#488882 = CARTESIAN_POINT('',(124.74999866642,-112.0000013335,1.56)); +#488883 = DIRECTION('',(0.,0.,1.)); +#488884 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488885 = ORIENTED_EDGE('',*,*,#488886,.T.); +#488886 = EDGE_CURVE('',#488878,#488887,#488889,.T.); +#488887 = VERTEX_POINT('',#488888); +#488888 = CARTESIAN_POINT('',(123.75,-111.5,1.56)); +#488889 = LINE('',#488890,#488891); +#488890 = CARTESIAN_POINT('',(124.75,-111.5,1.56)); +#488891 = VECTOR('',#488892,1.); +#488892 = DIRECTION('',(-1.,0.,0.)); +#488893 = ORIENTED_EDGE('',*,*,#488894,.T.); +#488894 = EDGE_CURVE('',#488887,#488895,#488897,.T.); +#488895 = VERTEX_POINT('',#488896); +#488896 = CARTESIAN_POINT('',(123.25,-112.,1.56)); +#488897 = CIRCLE('',#488898,0.500001333575); +#488898 = AXIS2_PLACEMENT_3D('',#488899,#488900,#488901); +#488899 = CARTESIAN_POINT('',(123.75000133357,-112.0000013335,1.56)); +#488900 = DIRECTION('',(0.,0.,1.)); +#488901 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488902 = ORIENTED_EDGE('',*,*,#488903,.T.); +#488903 = EDGE_CURVE('',#488895,#488904,#488906,.T.); +#488904 = VERTEX_POINT('',#488905); +#488905 = CARTESIAN_POINT('',(123.25,-113.,1.56)); +#488906 = LINE('',#488907,#488908); +#488907 = CARTESIAN_POINT('',(123.25,-112.,1.56)); +#488908 = VECTOR('',#488909,1.); +#488909 = DIRECTION('',(0.,-1.,0.)); +#488910 = ORIENTED_EDGE('',*,*,#488911,.T.); +#488911 = EDGE_CURVE('',#488904,#488912,#488914,.T.); +#488912 = VERTEX_POINT('',#488913); +#488913 = CARTESIAN_POINT('',(123.75,-113.5,1.56)); +#488914 = CIRCLE('',#488915,0.500001333575); +#488915 = AXIS2_PLACEMENT_3D('',#488916,#488917,#488918); +#488916 = CARTESIAN_POINT('',(123.75000133357,-112.9999986664,1.56)); +#488917 = DIRECTION('',(0.,0.,1.)); +#488918 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488919 = ORIENTED_EDGE('',*,*,#488920,.T.); +#488920 = EDGE_CURVE('',#488912,#488921,#488923,.T.); +#488921 = VERTEX_POINT('',#488922); +#488922 = CARTESIAN_POINT('',(124.75,-113.5,1.56)); +#488923 = LINE('',#488924,#488925); +#488924 = CARTESIAN_POINT('',(123.75,-113.5,1.56)); +#488925 = VECTOR('',#488926,1.); +#488926 = DIRECTION('',(1.,0.,0.)); +#488927 = ORIENTED_EDGE('',*,*,#488928,.T.); +#488928 = EDGE_CURVE('',#488921,#488929,#488931,.T.); +#488929 = VERTEX_POINT('',#488930); +#488930 = CARTESIAN_POINT('',(125.25,-113.,1.56)); +#488931 = CIRCLE('',#488932,0.500001333575); +#488932 = AXIS2_PLACEMENT_3D('',#488933,#488934,#488935); +#488933 = CARTESIAN_POINT('',(124.74999866642,-112.9999986664,1.56)); +#488934 = DIRECTION('',(0.,0.,1.)); +#488935 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#488936 = ORIENTED_EDGE('',*,*,#488937,.T.); +#488937 = EDGE_CURVE('',#488929,#488876,#488938,.T.); +#488938 = LINE('',#488939,#488940); +#488939 = CARTESIAN_POINT('',(125.25,-113.,1.56)); +#488940 = VECTOR('',#488941,1.); +#488941 = DIRECTION('',(0.,1.,0.)); +#488942 = FACE_BOUND('',#488943,.F.); +#488943 = EDGE_LOOP('',(#488944,#488955,#488963,#488972,#488980,#488989, + #488997,#489006)); +#488944 = ORIENTED_EDGE('',*,*,#488945,.T.); +#488945 = EDGE_CURVE('',#488946,#488948,#488950,.T.); +#488946 = VERTEX_POINT('',#488947); +#488947 = CARTESIAN_POINT('',(131.25,-112.,1.56)); +#488948 = VERTEX_POINT('',#488949); +#488949 = CARTESIAN_POINT('',(130.75,-111.5,1.56)); +#488950 = CIRCLE('',#488951,0.500001333575); +#488951 = AXIS2_PLACEMENT_3D('',#488952,#488953,#488954); +#488952 = CARTESIAN_POINT('',(130.74999866642,-112.0000013335,1.56)); +#488953 = DIRECTION('',(0.,0.,1.)); +#488954 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#488955 = ORIENTED_EDGE('',*,*,#488956,.T.); +#488956 = EDGE_CURVE('',#488948,#488957,#488959,.T.); +#488957 = VERTEX_POINT('',#488958); +#488958 = CARTESIAN_POINT('',(129.75,-111.5,1.56)); +#488959 = LINE('',#488960,#488961); +#488960 = CARTESIAN_POINT('',(130.75,-111.5,1.56)); +#488961 = VECTOR('',#488962,1.); +#488962 = DIRECTION('',(-1.,0.,0.)); +#488963 = ORIENTED_EDGE('',*,*,#488964,.T.); +#488964 = EDGE_CURVE('',#488957,#488965,#488967,.T.); +#488965 = VERTEX_POINT('',#488966); +#488966 = CARTESIAN_POINT('',(129.25,-112.,1.56)); +#488967 = CIRCLE('',#488968,0.500001333575); +#488968 = AXIS2_PLACEMENT_3D('',#488969,#488970,#488971); +#488969 = CARTESIAN_POINT('',(129.75000133357,-112.0000013335,1.56)); +#488970 = DIRECTION('',(0.,0.,1.)); +#488971 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#488972 = ORIENTED_EDGE('',*,*,#488973,.T.); +#488973 = EDGE_CURVE('',#488965,#488974,#488976,.T.); +#488974 = VERTEX_POINT('',#488975); +#488975 = CARTESIAN_POINT('',(129.25,-113.,1.56)); +#488976 = LINE('',#488977,#488978); +#488977 = CARTESIAN_POINT('',(129.25,-112.,1.56)); +#488978 = VECTOR('',#488979,1.); +#488979 = DIRECTION('',(0.,-1.,0.)); +#488980 = ORIENTED_EDGE('',*,*,#488981,.T.); +#488981 = EDGE_CURVE('',#488974,#488982,#488984,.T.); +#488982 = VERTEX_POINT('',#488983); +#488983 = CARTESIAN_POINT('',(129.75,-113.5,1.56)); +#488984 = CIRCLE('',#488985,0.500001333575); +#488985 = AXIS2_PLACEMENT_3D('',#488986,#488987,#488988); +#488986 = CARTESIAN_POINT('',(129.75000133357,-112.9999986664,1.56)); +#488987 = DIRECTION('',(0.,0.,1.)); +#488988 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#488989 = ORIENTED_EDGE('',*,*,#488990,.T.); +#488990 = EDGE_CURVE('',#488982,#488991,#488993,.T.); +#488991 = VERTEX_POINT('',#488992); +#488992 = CARTESIAN_POINT('',(130.75,-113.5,1.56)); +#488993 = LINE('',#488994,#488995); +#488994 = CARTESIAN_POINT('',(129.75,-113.5,1.56)); +#488995 = VECTOR('',#488996,1.); +#488996 = DIRECTION('',(1.,0.,0.)); +#488997 = ORIENTED_EDGE('',*,*,#488998,.T.); +#488998 = EDGE_CURVE('',#488991,#488999,#489001,.T.); +#488999 = VERTEX_POINT('',#489000); +#489000 = CARTESIAN_POINT('',(131.25,-113.,1.56)); +#489001 = CIRCLE('',#489002,0.500001333575); +#489002 = AXIS2_PLACEMENT_3D('',#489003,#489004,#489005); +#489003 = CARTESIAN_POINT('',(130.74999866642,-112.9999986664,1.56)); +#489004 = DIRECTION('',(0.,0.,1.)); +#489005 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#489006 = ORIENTED_EDGE('',*,*,#489007,.T.); +#489007 = EDGE_CURVE('',#488999,#488946,#489008,.T.); +#489008 = LINE('',#489009,#489010); +#489009 = CARTESIAN_POINT('',(131.25,-113.,1.56)); +#489010 = VECTOR('',#489011,1.); +#489011 = DIRECTION('',(0.,1.,0.)); +#489012 = FACE_BOUND('',#489013,.F.); +#489013 = EDGE_LOOP('',(#489014,#489025,#489033,#489042,#489050,#489059, + #489067,#489076)); +#489014 = ORIENTED_EDGE('',*,*,#489015,.T.); +#489015 = EDGE_CURVE('',#489016,#489018,#489020,.T.); +#489016 = VERTEX_POINT('',#489017); +#489017 = CARTESIAN_POINT('',(135.5,-112.,1.56)); +#489018 = VERTEX_POINT('',#489019); +#489019 = CARTESIAN_POINT('',(135.,-111.5,1.56)); +#489020 = CIRCLE('',#489021,0.500001333575); +#489021 = AXIS2_PLACEMENT_3D('',#489022,#489023,#489024); +#489022 = CARTESIAN_POINT('',(134.99999866642,-112.0000013335,1.56)); +#489023 = DIRECTION('',(0.,0.,1.)); +#489024 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#489025 = ORIENTED_EDGE('',*,*,#489026,.T.); +#489026 = EDGE_CURVE('',#489018,#489027,#489029,.T.); +#489027 = VERTEX_POINT('',#489028); +#489028 = CARTESIAN_POINT('',(134.,-111.5,1.56)); +#489029 = LINE('',#489030,#489031); +#489030 = CARTESIAN_POINT('',(135.,-111.5,1.56)); +#489031 = VECTOR('',#489032,1.); +#489032 = DIRECTION('',(-1.,0.,0.)); +#489033 = ORIENTED_EDGE('',*,*,#489034,.T.); +#489034 = EDGE_CURVE('',#489027,#489035,#489037,.T.); +#489035 = VERTEX_POINT('',#489036); +#489036 = CARTESIAN_POINT('',(133.5,-112.,1.56)); +#489037 = CIRCLE('',#489038,0.500001333575); +#489038 = AXIS2_PLACEMENT_3D('',#489039,#489040,#489041); +#489039 = CARTESIAN_POINT('',(134.00000133357,-112.0000013335,1.56)); +#489040 = DIRECTION('',(0.,0.,1.)); +#489041 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#489042 = ORIENTED_EDGE('',*,*,#489043,.T.); +#489043 = EDGE_CURVE('',#489035,#489044,#489046,.T.); +#489044 = VERTEX_POINT('',#489045); +#489045 = CARTESIAN_POINT('',(133.5,-113.,1.56)); +#489046 = LINE('',#489047,#489048); +#489047 = CARTESIAN_POINT('',(133.5,-112.,1.56)); +#489048 = VECTOR('',#489049,1.); +#489049 = DIRECTION('',(0.,-1.,0.)); +#489050 = ORIENTED_EDGE('',*,*,#489051,.T.); +#489051 = EDGE_CURVE('',#489044,#489052,#489054,.T.); +#489052 = VERTEX_POINT('',#489053); +#489053 = CARTESIAN_POINT('',(134.,-113.5,1.56)); +#489054 = CIRCLE('',#489055,0.500001333575); +#489055 = AXIS2_PLACEMENT_3D('',#489056,#489057,#489058); +#489056 = CARTESIAN_POINT('',(134.00000133357,-112.9999986664,1.56)); +#489057 = DIRECTION('',(0.,0.,1.)); +#489058 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#489059 = ORIENTED_EDGE('',*,*,#489060,.T.); +#489060 = EDGE_CURVE('',#489052,#489061,#489063,.T.); +#489061 = VERTEX_POINT('',#489062); +#489062 = CARTESIAN_POINT('',(135.,-113.5,1.56)); +#489063 = LINE('',#489064,#489065); +#489064 = CARTESIAN_POINT('',(134.,-113.5,1.56)); +#489065 = VECTOR('',#489066,1.); +#489066 = DIRECTION('',(1.,0.,0.)); +#489067 = ORIENTED_EDGE('',*,*,#489068,.T.); +#489068 = EDGE_CURVE('',#489061,#489069,#489071,.T.); +#489069 = VERTEX_POINT('',#489070); +#489070 = CARTESIAN_POINT('',(135.5,-113.,1.56)); +#489071 = CIRCLE('',#489072,0.500001333575); +#489072 = AXIS2_PLACEMENT_3D('',#489073,#489074,#489075); +#489073 = CARTESIAN_POINT('',(134.99999866642,-112.9999986664,1.56)); +#489074 = DIRECTION('',(0.,0.,1.)); +#489075 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#489076 = ORIENTED_EDGE('',*,*,#489077,.T.); +#489077 = EDGE_CURVE('',#489069,#489016,#489078,.T.); +#489078 = LINE('',#489079,#489080); +#489079 = CARTESIAN_POINT('',(135.5,-113.,1.56)); +#489080 = VECTOR('',#489081,1.); +#489081 = DIRECTION('',(0.,1.,0.)); +#489082 = FACE_BOUND('',#489083,.F.); +#489083 = EDGE_LOOP('',(#489084,#489095,#489103,#489112,#489120,#489129, + #489137,#489146)); +#489084 = ORIENTED_EDGE('',*,*,#489085,.T.); +#489085 = EDGE_CURVE('',#489086,#489088,#489090,.T.); +#489086 = VERTEX_POINT('',#489087); +#489087 = CARTESIAN_POINT('',(141.5,-112.,1.56)); +#489088 = VERTEX_POINT('',#489089); +#489089 = CARTESIAN_POINT('',(141.,-111.5,1.56)); +#489090 = CIRCLE('',#489091,0.500001333575); +#489091 = AXIS2_PLACEMENT_3D('',#489092,#489093,#489094); +#489092 = CARTESIAN_POINT('',(140.99999866642,-112.0000013335,1.56)); +#489093 = DIRECTION('',(0.,0.,1.)); +#489094 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#489095 = ORIENTED_EDGE('',*,*,#489096,.T.); +#489096 = EDGE_CURVE('',#489088,#489097,#489099,.T.); +#489097 = VERTEX_POINT('',#489098); +#489098 = CARTESIAN_POINT('',(140.,-111.5,1.56)); +#489099 = LINE('',#489100,#489101); +#489100 = CARTESIAN_POINT('',(141.,-111.5,1.56)); +#489101 = VECTOR('',#489102,1.); +#489102 = DIRECTION('',(-1.,0.,0.)); +#489103 = ORIENTED_EDGE('',*,*,#489104,.T.); +#489104 = EDGE_CURVE('',#489097,#489105,#489107,.T.); +#489105 = VERTEX_POINT('',#489106); +#489106 = CARTESIAN_POINT('',(139.5,-112.,1.56)); +#489107 = CIRCLE('',#489108,0.500001333575); +#489108 = AXIS2_PLACEMENT_3D('',#489109,#489110,#489111); +#489109 = CARTESIAN_POINT('',(140.00000133357,-112.0000013335,1.56)); +#489110 = DIRECTION('',(0.,0.,1.)); +#489111 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#489112 = ORIENTED_EDGE('',*,*,#489113,.T.); +#489113 = EDGE_CURVE('',#489105,#489114,#489116,.T.); +#489114 = VERTEX_POINT('',#489115); +#489115 = CARTESIAN_POINT('',(139.5,-113.,1.56)); +#489116 = LINE('',#489117,#489118); +#489117 = CARTESIAN_POINT('',(139.5,-112.,1.56)); +#489118 = VECTOR('',#489119,1.); +#489119 = DIRECTION('',(0.,-1.,0.)); +#489120 = ORIENTED_EDGE('',*,*,#489121,.T.); +#489121 = EDGE_CURVE('',#489114,#489122,#489124,.T.); +#489122 = VERTEX_POINT('',#489123); +#489123 = CARTESIAN_POINT('',(140.,-113.5,1.56)); +#489124 = CIRCLE('',#489125,0.500001333575); +#489125 = AXIS2_PLACEMENT_3D('',#489126,#489127,#489128); +#489126 = CARTESIAN_POINT('',(140.00000133357,-112.9999986664,1.56)); +#489127 = DIRECTION('',(0.,0.,1.)); +#489128 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#489129 = ORIENTED_EDGE('',*,*,#489130,.T.); +#489130 = EDGE_CURVE('',#489122,#489131,#489133,.T.); +#489131 = VERTEX_POINT('',#489132); +#489132 = CARTESIAN_POINT('',(141.,-113.5,1.56)); +#489133 = LINE('',#489134,#489135); +#489134 = CARTESIAN_POINT('',(140.,-113.5,1.56)); +#489135 = VECTOR('',#489136,1.); +#489136 = DIRECTION('',(1.,0.,0.)); +#489137 = ORIENTED_EDGE('',*,*,#489138,.T.); +#489138 = EDGE_CURVE('',#489131,#489139,#489141,.T.); +#489139 = VERTEX_POINT('',#489140); +#489140 = CARTESIAN_POINT('',(141.5,-113.,1.56)); +#489141 = CIRCLE('',#489142,0.500001333575); +#489142 = AXIS2_PLACEMENT_3D('',#489143,#489144,#489145); +#489143 = CARTESIAN_POINT('',(140.99999866642,-112.9999986664,1.56)); +#489144 = DIRECTION('',(0.,0.,1.)); +#489145 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#489146 = ORIENTED_EDGE('',*,*,#489147,.T.); +#489147 = EDGE_CURVE('',#489139,#489086,#489148,.T.); +#489148 = LINE('',#489149,#489150); +#489149 = CARTESIAN_POINT('',(141.5,-113.,1.56)); +#489150 = VECTOR('',#489151,1.); +#489151 = DIRECTION('',(0.,1.,0.)); +#489152 = FACE_BOUND('',#489153,.F.); +#489153 = EDGE_LOOP('',(#489154,#489165,#489173,#489182,#489190,#489199, + #489207,#489216)); +#489154 = ORIENTED_EDGE('',*,*,#489155,.T.); +#489155 = EDGE_CURVE('',#489156,#489158,#489160,.T.); +#489156 = VERTEX_POINT('',#489157); +#489157 = CARTESIAN_POINT('',(145.75,-112.,1.56)); +#489158 = VERTEX_POINT('',#489159); +#489159 = CARTESIAN_POINT('',(145.25,-111.5,1.56)); +#489160 = CIRCLE('',#489161,0.500001333575); +#489161 = AXIS2_PLACEMENT_3D('',#489162,#489163,#489164); +#489162 = CARTESIAN_POINT('',(145.24999866642,-112.0000013335,1.56)); +#489163 = DIRECTION('',(0.,0.,1.)); +#489164 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#489165 = ORIENTED_EDGE('',*,*,#489166,.T.); +#489166 = EDGE_CURVE('',#489158,#489167,#489169,.T.); +#489167 = VERTEX_POINT('',#489168); +#489168 = CARTESIAN_POINT('',(144.25,-111.5,1.56)); +#489169 = LINE('',#489170,#489171); +#489170 = CARTESIAN_POINT('',(145.25,-111.5,1.56)); +#489171 = VECTOR('',#489172,1.); +#489172 = DIRECTION('',(-1.,0.,0.)); +#489173 = ORIENTED_EDGE('',*,*,#489174,.T.); +#489174 = EDGE_CURVE('',#489167,#489175,#489177,.T.); +#489175 = VERTEX_POINT('',#489176); +#489176 = CARTESIAN_POINT('',(143.75,-112.,1.56)); +#489177 = CIRCLE('',#489178,0.500001333575); +#489178 = AXIS2_PLACEMENT_3D('',#489179,#489180,#489181); +#489179 = CARTESIAN_POINT('',(144.25000133357,-112.0000013335,1.56)); +#489180 = DIRECTION('',(0.,0.,1.)); +#489181 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#489182 = ORIENTED_EDGE('',*,*,#489183,.T.); +#489183 = EDGE_CURVE('',#489175,#489184,#489186,.T.); +#489184 = VERTEX_POINT('',#489185); +#489185 = CARTESIAN_POINT('',(143.75,-113.,1.56)); +#489186 = LINE('',#489187,#489188); +#489187 = CARTESIAN_POINT('',(143.75,-112.,1.56)); +#489188 = VECTOR('',#489189,1.); +#489189 = DIRECTION('',(0.,-1.,0.)); +#489190 = ORIENTED_EDGE('',*,*,#489191,.T.); +#489191 = EDGE_CURVE('',#489184,#489192,#489194,.T.); +#489192 = VERTEX_POINT('',#489193); +#489193 = CARTESIAN_POINT('',(144.25,-113.5,1.56)); +#489194 = CIRCLE('',#489195,0.500001333575); +#489195 = AXIS2_PLACEMENT_3D('',#489196,#489197,#489198); +#489196 = CARTESIAN_POINT('',(144.25000133357,-112.9999986664,1.56)); +#489197 = DIRECTION('',(0.,0.,1.)); +#489198 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#489199 = ORIENTED_EDGE('',*,*,#489200,.T.); +#489200 = EDGE_CURVE('',#489192,#489201,#489203,.T.); +#489201 = VERTEX_POINT('',#489202); +#489202 = CARTESIAN_POINT('',(145.25,-113.5,1.56)); +#489203 = LINE('',#489204,#489205); +#489204 = CARTESIAN_POINT('',(144.25,-113.5,1.56)); +#489205 = VECTOR('',#489206,1.); +#489206 = DIRECTION('',(1.,0.,0.)); +#489207 = ORIENTED_EDGE('',*,*,#489208,.T.); +#489208 = EDGE_CURVE('',#489201,#489209,#489211,.T.); +#489209 = VERTEX_POINT('',#489210); +#489210 = CARTESIAN_POINT('',(145.75,-113.,1.56)); +#489211 = CIRCLE('',#489212,0.500001333575); +#489212 = AXIS2_PLACEMENT_3D('',#489213,#489214,#489215); +#489213 = CARTESIAN_POINT('',(145.24999866642,-112.9999986664,1.56)); +#489214 = DIRECTION('',(0.,0.,1.)); +#489215 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#489216 = ORIENTED_EDGE('',*,*,#489217,.T.); +#489217 = EDGE_CURVE('',#489209,#489156,#489218,.T.); +#489218 = LINE('',#489219,#489220); +#489219 = CARTESIAN_POINT('',(145.75,-113.,1.56)); +#489220 = VECTOR('',#489221,1.); +#489221 = DIRECTION('',(0.,1.,0.)); +#489222 = FACE_BOUND('',#489223,.F.); +#489223 = EDGE_LOOP('',(#489224,#489235,#489243,#489252,#489260,#489269, + #489277,#489286)); +#489224 = ORIENTED_EDGE('',*,*,#489225,.T.); +#489225 = EDGE_CURVE('',#489226,#489228,#489230,.T.); +#489226 = VERTEX_POINT('',#489227); +#489227 = CARTESIAN_POINT('',(151.75,-112.,1.56)); +#489228 = VERTEX_POINT('',#489229); +#489229 = CARTESIAN_POINT('',(151.25,-111.5,1.56)); +#489230 = CIRCLE('',#489231,0.500001333575); +#489231 = AXIS2_PLACEMENT_3D('',#489232,#489233,#489234); +#489232 = CARTESIAN_POINT('',(151.24999866642,-112.0000013335,1.56)); +#489233 = DIRECTION('',(0.,0.,1.)); +#489234 = DIRECTION('',(0.999999999996,2.667139134199E-06,-0.)); +#489235 = ORIENTED_EDGE('',*,*,#489236,.T.); +#489236 = EDGE_CURVE('',#489228,#489237,#489239,.T.); +#489237 = VERTEX_POINT('',#489238); +#489238 = CARTESIAN_POINT('',(150.25,-111.5,1.56)); +#489239 = LINE('',#489240,#489241); +#489240 = CARTESIAN_POINT('',(151.25,-111.5,1.56)); +#489241 = VECTOR('',#489242,1.); +#489242 = DIRECTION('',(-1.,0.,0.)); +#489243 = ORIENTED_EDGE('',*,*,#489244,.T.); +#489244 = EDGE_CURVE('',#489237,#489245,#489247,.T.); +#489245 = VERTEX_POINT('',#489246); +#489246 = CARTESIAN_POINT('',(149.75,-112.,1.56)); +#489247 = CIRCLE('',#489248,0.500001333575); +#489248 = AXIS2_PLACEMENT_3D('',#489249,#489250,#489251); +#489249 = CARTESIAN_POINT('',(150.25000133357,-112.0000013335,1.56)); +#489250 = DIRECTION('',(0.,0.,1.)); +#489251 = DIRECTION('',(-2.667139134199E-06,0.999999999996,0.)); +#489252 = ORIENTED_EDGE('',*,*,#489253,.T.); +#489253 = EDGE_CURVE('',#489245,#489254,#489256,.T.); +#489254 = VERTEX_POINT('',#489255); +#489255 = CARTESIAN_POINT('',(149.75,-113.,1.56)); +#489256 = LINE('',#489257,#489258); +#489257 = CARTESIAN_POINT('',(149.75,-112.,1.56)); +#489258 = VECTOR('',#489259,1.); +#489259 = DIRECTION('',(0.,-1.,0.)); +#489260 = ORIENTED_EDGE('',*,*,#489261,.T.); +#489261 = EDGE_CURVE('',#489254,#489262,#489264,.T.); +#489262 = VERTEX_POINT('',#489263); +#489263 = CARTESIAN_POINT('',(150.25,-113.5,1.56)); +#489264 = CIRCLE('',#489265,0.500001333575); +#489265 = AXIS2_PLACEMENT_3D('',#489266,#489267,#489268); +#489266 = CARTESIAN_POINT('',(150.25000133357,-112.9999986664,1.56)); +#489267 = DIRECTION('',(0.,0.,1.)); +#489268 = DIRECTION('',(-0.999999999996,-2.667139134199E-06,0.)); +#489269 = ORIENTED_EDGE('',*,*,#489270,.T.); +#489270 = EDGE_CURVE('',#489262,#489271,#489273,.T.); +#489271 = VERTEX_POINT('',#489272); +#489272 = CARTESIAN_POINT('',(151.25,-113.5,1.56)); +#489273 = LINE('',#489274,#489275); +#489274 = CARTESIAN_POINT('',(150.25,-113.5,1.56)); +#489275 = VECTOR('',#489276,1.); +#489276 = DIRECTION('',(1.,0.,0.)); +#489277 = ORIENTED_EDGE('',*,*,#489278,.T.); +#489278 = EDGE_CURVE('',#489271,#489279,#489281,.T.); +#489279 = VERTEX_POINT('',#489280); +#489280 = CARTESIAN_POINT('',(151.75,-113.,1.56)); +#489281 = CIRCLE('',#489282,0.500001333575); +#489282 = AXIS2_PLACEMENT_3D('',#489283,#489284,#489285); +#489283 = CARTESIAN_POINT('',(151.24999866642,-112.9999986664,1.56)); +#489284 = DIRECTION('',(0.,0.,1.)); +#489285 = DIRECTION('',(2.667139134199E-06,-0.999999999996,0.)); +#489286 = ORIENTED_EDGE('',*,*,#489287,.T.); +#489287 = EDGE_CURVE('',#489279,#489226,#489288,.T.); +#489288 = LINE('',#489289,#489290); +#489289 = CARTESIAN_POINT('',(151.75,-113.,1.56)); +#489290 = VECTOR('',#489291,1.); +#489291 = DIRECTION('',(0.,1.,0.)); +#489292 = FACE_BOUND('',#489293,.F.); +#489293 = EDGE_LOOP('',(#489294)); +#489294 = ORIENTED_EDGE('',*,*,#489295,.T.); +#489295 = EDGE_CURVE('',#489296,#489296,#489298,.T.); +#489296 = VERTEX_POINT('',#489297); +#489297 = CARTESIAN_POINT('',(135.474999,-105.5,1.56)); +#489298 = CIRCLE('',#489299,1.224999); +#489299 = AXIS2_PLACEMENT_3D('',#489300,#489301,#489302); +#489300 = CARTESIAN_POINT('',(134.25,-105.5,1.56)); +#489301 = DIRECTION('',(0.,0.,1.)); +#489302 = DIRECTION('',(1.,0.,-0.)); +#489303 = FACE_BOUND('',#489304,.F.); +#489304 = EDGE_LOOP('',(#489305)); +#489305 = ORIENTED_EDGE('',*,*,#489306,.T.); +#489306 = EDGE_CURVE('',#489307,#489307,#489309,.T.); +#489307 = VERTEX_POINT('',#489308); +#489308 = CARTESIAN_POINT('',(141.974999,-105.5,1.56)); +#489309 = CIRCLE('',#489310,1.224999); +#489310 = AXIS2_PLACEMENT_3D('',#489311,#489312,#489313); +#489311 = CARTESIAN_POINT('',(140.75,-105.5,1.56)); +#489312 = DIRECTION('',(0.,0.,1.)); +#489313 = DIRECTION('',(1.,0.,-0.)); +#489314 = FACE_BOUND('',#489315,.F.); +#489315 = EDGE_LOOP('',(#489316)); +#489316 = ORIENTED_EDGE('',*,*,#489317,.T.); +#489317 = EDGE_CURVE('',#489318,#489318,#489320,.T.); +#489318 = VERTEX_POINT('',#489319); +#489319 = CARTESIAN_POINT('',(122.2,-102.65,1.56)); +#489320 = CIRCLE('',#489321,0.45); +#489321 = AXIS2_PLACEMENT_3D('',#489322,#489323,#489324); +#489322 = CARTESIAN_POINT('',(121.75,-102.65,1.56)); +#489323 = DIRECTION('',(0.,0.,1.)); +#489324 = DIRECTION('',(1.,0.,-0.)); +#489325 = FACE_BOUND('',#489326,.F.); +#489326 = EDGE_LOOP('',(#489327)); +#489327 = ORIENTED_EDGE('',*,*,#489328,.T.); +#489328 = EDGE_CURVE('',#489329,#489329,#489331,.T.); +#489329 = VERTEX_POINT('',#489330); +#489330 = CARTESIAN_POINT('',(153.65,-102.65,1.56)); +#489331 = CIRCLE('',#489332,0.45); +#489332 = AXIS2_PLACEMENT_3D('',#489333,#489334,#489335); +#489333 = CARTESIAN_POINT('',(153.2,-102.65,1.56)); +#489334 = DIRECTION('',(0.,0.,1.)); +#489335 = DIRECTION('',(1.,0.,-0.)); +#489336 = FACE_BOUND('',#489337,.F.); +#489337 = EDGE_LOOP('',(#489338,#489349,#489357,#489366,#489374,#489383, + #489391,#489400)); +#489338 = ORIENTED_EDGE('',*,*,#489339,.T.); +#489339 = EDGE_CURVE('',#489340,#489342,#489344,.T.); +#489340 = VERTEX_POINT('',#489341); +#489341 = CARTESIAN_POINT('',(121.15,-101.95,1.56)); +#489342 = VERTEX_POINT('',#489343); +#489343 = CARTESIAN_POINT('',(120.925,-101.725,1.56)); +#489344 = CIRCLE('',#489345,0.225000087974); +#489345 = AXIS2_PLACEMENT_3D('',#489346,#489347,#489348); +#489346 = CARTESIAN_POINT('',(120.92499991202,-101.9500000879,1.56)); +#489347 = DIRECTION('',(0.,0.,1.)); +#489348 = DIRECTION('',(1.,3.909955352945E-07,-0.)); +#489349 = ORIENTED_EDGE('',*,*,#489350,.T.); +#489350 = EDGE_CURVE('',#489342,#489351,#489353,.T.); +#489351 = VERTEX_POINT('',#489352); +#489352 = CARTESIAN_POINT('',(120.475,-101.725,1.56)); +#489353 = LINE('',#489354,#489355); +#489354 = CARTESIAN_POINT('',(120.925,-101.725,1.56)); +#489355 = VECTOR('',#489356,1.); +#489356 = DIRECTION('',(-1.,0.,0.)); +#489357 = ORIENTED_EDGE('',*,*,#489358,.T.); +#489358 = EDGE_CURVE('',#489351,#489359,#489361,.T.); +#489359 = VERTEX_POINT('',#489360); +#489360 = CARTESIAN_POINT('',(120.25,-101.95,1.56)); +#489361 = CIRCLE('',#489362,0.225000087974); +#489362 = AXIS2_PLACEMENT_3D('',#489363,#489364,#489365); +#489363 = CARTESIAN_POINT('',(120.47500008797,-101.9500000879,1.56)); +#489364 = DIRECTION('',(0.,0.,1.)); +#489365 = DIRECTION('',(-3.909954721353E-07,1.,0.)); +#489366 = ORIENTED_EDGE('',*,*,#489367,.T.); +#489367 = EDGE_CURVE('',#489359,#489368,#489370,.T.); +#489368 = VERTEX_POINT('',#489369); +#489369 = CARTESIAN_POINT('',(120.25,-102.8,1.56)); +#489370 = LINE('',#489371,#489372); +#489371 = CARTESIAN_POINT('',(120.25,-101.95,1.56)); +#489372 = VECTOR('',#489373,1.); +#489373 = DIRECTION('',(0.,-1.,0.)); +#489374 = ORIENTED_EDGE('',*,*,#489375,.T.); +#489375 = EDGE_CURVE('',#489368,#489376,#489378,.T.); +#489376 = VERTEX_POINT('',#489377); +#489377 = CARTESIAN_POINT('',(120.475,-103.025,1.56)); +#489378 = CIRCLE('',#489379,0.225000087974); +#489379 = AXIS2_PLACEMENT_3D('',#489380,#489381,#489382); +#489380 = CARTESIAN_POINT('',(120.47500008797,-102.799999912,1.56)); +#489381 = DIRECTION('',(0.,0.,1.)); +#489382 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#489383 = ORIENTED_EDGE('',*,*,#489384,.T.); +#489384 = EDGE_CURVE('',#489376,#489385,#489387,.T.); +#489385 = VERTEX_POINT('',#489386); +#489386 = CARTESIAN_POINT('',(120.925,-103.025,1.56)); +#489387 = LINE('',#489388,#489389); +#489388 = CARTESIAN_POINT('',(120.475,-103.025,1.56)); +#489389 = VECTOR('',#489390,1.); +#489390 = DIRECTION('',(1.,0.,0.)); +#489391 = ORIENTED_EDGE('',*,*,#489392,.T.); +#489392 = EDGE_CURVE('',#489385,#489393,#489395,.T.); +#489393 = VERTEX_POINT('',#489394); +#489394 = CARTESIAN_POINT('',(121.15,-102.8,1.56)); +#489395 = CIRCLE('',#489396,0.225000087974); +#489396 = AXIS2_PLACEMENT_3D('',#489397,#489398,#489399); +#489397 = CARTESIAN_POINT('',(120.92499991202,-102.799999912,1.56)); +#489398 = DIRECTION('',(0.,0.,1.)); +#489399 = DIRECTION('',(3.909955352945E-07,-1.,0.)); +#489400 = ORIENTED_EDGE('',*,*,#489401,.T.); +#489401 = EDGE_CURVE('',#489393,#489340,#489402,.T.); +#489402 = LINE('',#489403,#489404); +#489403 = CARTESIAN_POINT('',(121.15,-102.8,1.56)); +#489404 = VECTOR('',#489405,1.); +#489405 = DIRECTION('',(0.,1.,0.)); +#489406 = FACE_BOUND('',#489407,.F.); +#489407 = EDGE_LOOP('',(#489408,#489419,#489427,#489436,#489444,#489453, + #489461,#489470)); +#489408 = ORIENTED_EDGE('',*,*,#489409,.T.); +#489409 = EDGE_CURVE('',#489410,#489412,#489414,.T.); +#489410 = VERTEX_POINT('',#489411); +#489411 = CARTESIAN_POINT('',(154.7,-101.95,1.56)); +#489412 = VERTEX_POINT('',#489413); +#489413 = CARTESIAN_POINT('',(154.475,-101.725,1.56)); +#489414 = CIRCLE('',#489415,0.225000087974); +#489415 = AXIS2_PLACEMENT_3D('',#489416,#489417,#489418); +#489416 = CARTESIAN_POINT('',(154.47499991202,-101.9500000879,1.56)); +#489417 = DIRECTION('',(0.,0.,1.)); +#489418 = DIRECTION('',(1.,3.909953458166E-07,-0.)); +#489419 = ORIENTED_EDGE('',*,*,#489420,.T.); +#489420 = EDGE_CURVE('',#489412,#489421,#489423,.T.); +#489421 = VERTEX_POINT('',#489422); +#489422 = CARTESIAN_POINT('',(154.025,-101.725,1.56)); +#489423 = LINE('',#489424,#489425); +#489424 = CARTESIAN_POINT('',(154.475,-101.725,1.56)); +#489425 = VECTOR('',#489426,1.); +#489426 = DIRECTION('',(-1.,0.,0.)); +#489427 = ORIENTED_EDGE('',*,*,#489428,.T.); +#489428 = EDGE_CURVE('',#489421,#489429,#489431,.T.); +#489429 = VERTEX_POINT('',#489430); +#489430 = CARTESIAN_POINT('',(153.8,-101.95,1.56)); +#489431 = CIRCLE('',#489432,0.225000087974); +#489432 = AXIS2_PLACEMENT_3D('',#489433,#489434,#489435); +#489433 = CARTESIAN_POINT('',(154.02500008797,-101.9500000879,1.56)); +#489434 = DIRECTION('',(0.,0.,1.)); +#489435 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#489436 = ORIENTED_EDGE('',*,*,#489437,.T.); +#489437 = EDGE_CURVE('',#489429,#489438,#489440,.T.); +#489438 = VERTEX_POINT('',#489439); +#489439 = CARTESIAN_POINT('',(153.8,-102.8,1.56)); +#489440 = LINE('',#489441,#489442); +#489441 = CARTESIAN_POINT('',(153.8,-101.95,1.56)); +#489442 = VECTOR('',#489443,1.); +#489443 = DIRECTION('',(0.,-1.,0.)); +#489444 = ORIENTED_EDGE('',*,*,#489445,.T.); +#489445 = EDGE_CURVE('',#489438,#489446,#489448,.T.); +#489446 = VERTEX_POINT('',#489447); +#489447 = CARTESIAN_POINT('',(154.025,-103.025,1.56)); +#489448 = CIRCLE('',#489449,0.225000087974); +#489449 = AXIS2_PLACEMENT_3D('',#489450,#489451,#489452); +#489450 = CARTESIAN_POINT('',(154.02500008797,-102.799999912,1.56)); +#489451 = DIRECTION('',(0.,0.,1.)); +#489452 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#489453 = ORIENTED_EDGE('',*,*,#489454,.T.); +#489454 = EDGE_CURVE('',#489446,#489455,#489457,.T.); +#489455 = VERTEX_POINT('',#489456); +#489456 = CARTESIAN_POINT('',(154.475,-103.025,1.56)); +#489457 = LINE('',#489458,#489459); +#489458 = CARTESIAN_POINT('',(154.025,-103.025,1.56)); +#489459 = VECTOR('',#489460,1.); +#489460 = DIRECTION('',(1.,0.,0.)); +#489461 = ORIENTED_EDGE('',*,*,#489462,.T.); +#489462 = EDGE_CURVE('',#489455,#489463,#489465,.T.); +#489463 = VERTEX_POINT('',#489464); +#489464 = CARTESIAN_POINT('',(154.7,-102.8,1.56)); +#489465 = CIRCLE('',#489466,0.225000087974); +#489466 = AXIS2_PLACEMENT_3D('',#489467,#489468,#489469); +#489467 = CARTESIAN_POINT('',(154.47499991202,-102.799999912,1.56)); +#489468 = DIRECTION('',(0.,0.,1.)); +#489469 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#489470 = ORIENTED_EDGE('',*,*,#489471,.T.); +#489471 = EDGE_CURVE('',#489463,#489410,#489472,.T.); +#489472 = LINE('',#489473,#489474); +#489473 = CARTESIAN_POINT('',(154.7,-102.8,1.56)); +#489474 = VECTOR('',#489475,1.); +#489475 = DIRECTION('',(0.,1.,0.)); +#489476 = FACE_BOUND('',#489477,.F.); +#489477 = EDGE_LOOP('',(#489478)); +#489478 = ORIENTED_EDGE('',*,*,#489479,.T.); +#489479 = EDGE_CURVE('',#489480,#489480,#489482,.T.); +#489480 = VERTEX_POINT('',#489481); +#489481 = CARTESIAN_POINT('',(135.474999,-101.,1.56)); +#489482 = CIRCLE('',#489483,1.224999); +#489483 = AXIS2_PLACEMENT_3D('',#489484,#489485,#489486); +#489484 = CARTESIAN_POINT('',(134.25,-101.,1.56)); +#489485 = DIRECTION('',(0.,0.,1.)); +#489486 = DIRECTION('',(1.,0.,-0.)); +#489487 = FACE_BOUND('',#489488,.F.); +#489488 = EDGE_LOOP('',(#489489)); +#489489 = ORIENTED_EDGE('',*,*,#489490,.T.); +#489490 = EDGE_CURVE('',#489491,#489491,#489493,.T.); +#489491 = VERTEX_POINT('',#489492); +#489492 = CARTESIAN_POINT('',(141.974999,-101.,1.56)); +#489493 = CIRCLE('',#489494,1.224999); +#489494 = AXIS2_PLACEMENT_3D('',#489495,#489496,#489497); +#489495 = CARTESIAN_POINT('',(140.75,-101.,1.56)); +#489496 = DIRECTION('',(0.,0.,1.)); +#489497 = DIRECTION('',(1.,0.,-0.)); +#489498 = FACE_BOUND('',#489499,.F.); +#489499 = EDGE_LOOP('',(#489500,#489511,#489519,#489528,#489536,#489545, + #489553,#489562)); +#489500 = ORIENTED_EDGE('',*,*,#489501,.T.); +#489501 = EDGE_CURVE('',#489502,#489504,#489506,.T.); +#489502 = VERTEX_POINT('',#489503); +#489503 = CARTESIAN_POINT('',(123.55,-101.5625,1.56)); +#489504 = VERTEX_POINT('',#489505); +#489505 = CARTESIAN_POINT('',(123.3625,-101.375,1.56)); +#489506 = CIRCLE('',#489507,0.187498366229); +#489507 = AXIS2_PLACEMENT_3D('',#489508,#489509,#489510); +#489508 = CARTESIAN_POINT('',(123.36250163377,-101.5624983662,1.56)); +#489509 = DIRECTION('',(0.,0.,1.)); +#489510 = DIRECTION('',(0.999999999962,-8.713558430711E-06,0.)); +#489511 = ORIENTED_EDGE('',*,*,#489512,.T.); +#489512 = EDGE_CURVE('',#489504,#489513,#489515,.T.); +#489513 = VERTEX_POINT('',#489514); +#489514 = CARTESIAN_POINT('',(121.9375,-101.375,1.56)); +#489515 = LINE('',#489516,#489517); +#489516 = CARTESIAN_POINT('',(123.3625,-101.375,1.56)); +#489517 = VECTOR('',#489518,1.); +#489518 = DIRECTION('',(-1.,0.,0.)); +#489519 = ORIENTED_EDGE('',*,*,#489520,.T.); +#489520 = EDGE_CURVE('',#489513,#489521,#489523,.T.); +#489521 = VERTEX_POINT('',#489522); +#489522 = CARTESIAN_POINT('',(121.75,-101.5625,1.56)); +#489523 = CIRCLE('',#489524,0.187498366229); +#489524 = AXIS2_PLACEMENT_3D('',#489525,#489526,#489527); +#489525 = CARTESIAN_POINT('',(121.93749836622,-101.5624983662,1.56)); +#489526 = DIRECTION('',(0.,0.,1.)); +#489527 = DIRECTION('',(8.713558430711E-06,0.999999999962,-0.)); +#489528 = ORIENTED_EDGE('',*,*,#489529,.T.); +#489529 = EDGE_CURVE('',#489521,#489530,#489532,.T.); +#489530 = VERTEX_POINT('',#489531); +#489531 = CARTESIAN_POINT('',(121.75,-101.9375,1.56)); +#489532 = LINE('',#489533,#489534); +#489533 = CARTESIAN_POINT('',(121.75,-101.5625,1.56)); +#489534 = VECTOR('',#489535,1.); +#489535 = DIRECTION('',(0.,-1.,0.)); +#489536 = ORIENTED_EDGE('',*,*,#489537,.T.); +#489537 = EDGE_CURVE('',#489530,#489538,#489540,.T.); +#489538 = VERTEX_POINT('',#489539); +#489539 = CARTESIAN_POINT('',(121.9375,-102.125,1.56)); +#489540 = CIRCLE('',#489541,0.187498366229); +#489541 = AXIS2_PLACEMENT_3D('',#489542,#489543,#489544); +#489542 = CARTESIAN_POINT('',(121.93749836622,-101.9375016337,1.56)); +#489543 = DIRECTION('',(0.,0.,1.)); +#489544 = DIRECTION('',(-0.999999999962,8.713558430711E-06,0.)); +#489545 = ORIENTED_EDGE('',*,*,#489546,.T.); +#489546 = EDGE_CURVE('',#489538,#489547,#489549,.T.); +#489547 = VERTEX_POINT('',#489548); +#489548 = CARTESIAN_POINT('',(123.3625,-102.125,1.56)); +#489549 = LINE('',#489550,#489551); +#489550 = CARTESIAN_POINT('',(121.9375,-102.125,1.56)); +#489551 = VECTOR('',#489552,1.); +#489552 = DIRECTION('',(1.,0.,0.)); +#489553 = ORIENTED_EDGE('',*,*,#489554,.T.); +#489554 = EDGE_CURVE('',#489547,#489555,#489557,.T.); +#489555 = VERTEX_POINT('',#489556); +#489556 = CARTESIAN_POINT('',(123.55,-101.9375,1.56)); +#489557 = CIRCLE('',#489558,0.187498366229); +#489558 = AXIS2_PLACEMENT_3D('',#489559,#489560,#489561); +#489559 = CARTESIAN_POINT('',(123.36250163377,-101.9375016337,1.56)); +#489560 = DIRECTION('',(0.,0.,1.)); +#489561 = DIRECTION('',(-8.713558354919E-06,-0.999999999962,0.)); +#489562 = ORIENTED_EDGE('',*,*,#489563,.T.); +#489563 = EDGE_CURVE('',#489555,#489502,#489564,.T.); +#489564 = LINE('',#489565,#489566); +#489565 = CARTESIAN_POINT('',(123.55,-101.9375,1.56)); +#489566 = VECTOR('',#489567,1.); +#489567 = DIRECTION('',(0.,1.,0.)); +#489568 = FACE_BOUND('',#489569,.F.); +#489569 = EDGE_LOOP('',(#489570,#489581,#489589,#489598,#489606,#489615, + #489623,#489632)); +#489570 = ORIENTED_EDGE('',*,*,#489571,.T.); +#489571 = EDGE_CURVE('',#489572,#489574,#489576,.T.); +#489572 = VERTEX_POINT('',#489573); +#489573 = CARTESIAN_POINT('',(153.2,-101.5625,1.56)); +#489574 = VERTEX_POINT('',#489575); +#489575 = CARTESIAN_POINT('',(153.0125,-101.375,1.56)); +#489576 = CIRCLE('',#489577,0.187498366229); +#489577 = AXIS2_PLACEMENT_3D('',#489578,#489579,#489580); +#489578 = CARTESIAN_POINT('',(153.01250163377,-101.5624983662,1.56)); +#489579 = DIRECTION('',(0.,0.,1.)); +#489580 = DIRECTION('',(0.999999999962,-8.713558582296E-06,0.)); +#489581 = ORIENTED_EDGE('',*,*,#489582,.T.); +#489582 = EDGE_CURVE('',#489574,#489583,#489585,.T.); +#489583 = VERTEX_POINT('',#489584); +#489584 = CARTESIAN_POINT('',(151.5875,-101.375,1.56)); +#489585 = LINE('',#489586,#489587); +#489586 = CARTESIAN_POINT('',(153.0125,-101.375,1.56)); +#489587 = VECTOR('',#489588,1.); +#489588 = DIRECTION('',(-1.,0.,0.)); +#489589 = ORIENTED_EDGE('',*,*,#489590,.T.); +#489590 = EDGE_CURVE('',#489583,#489591,#489593,.T.); +#489591 = VERTEX_POINT('',#489592); +#489592 = CARTESIAN_POINT('',(151.4,-101.5625,1.56)); +#489593 = CIRCLE('',#489594,0.187498366229); +#489594 = AXIS2_PLACEMENT_3D('',#489595,#489596,#489597); +#489595 = CARTESIAN_POINT('',(151.58749836622,-101.5624983662,1.56)); +#489596 = DIRECTION('',(0.,0.,1.)); +#489597 = DIRECTION('',(8.713558582296E-06,0.999999999962,-0.)); +#489598 = ORIENTED_EDGE('',*,*,#489599,.T.); +#489599 = EDGE_CURVE('',#489591,#489600,#489602,.T.); +#489600 = VERTEX_POINT('',#489601); +#489601 = CARTESIAN_POINT('',(151.4,-101.9375,1.56)); +#489602 = LINE('',#489603,#489604); +#489603 = CARTESIAN_POINT('',(151.4,-101.5625,1.56)); +#489604 = VECTOR('',#489605,1.); +#489605 = DIRECTION('',(0.,-1.,0.)); +#489606 = ORIENTED_EDGE('',*,*,#489607,.T.); +#489607 = EDGE_CURVE('',#489600,#489608,#489610,.T.); +#489608 = VERTEX_POINT('',#489609); +#489609 = CARTESIAN_POINT('',(151.5875,-102.125,1.56)); +#489610 = CIRCLE('',#489611,0.187498366229); +#489611 = AXIS2_PLACEMENT_3D('',#489612,#489613,#489614); +#489612 = CARTESIAN_POINT('',(151.58749836622,-101.9375016337,1.56)); +#489613 = DIRECTION('',(0.,0.,1.)); +#489614 = DIRECTION('',(-0.999999999962,8.713558582296E-06,0.)); +#489615 = ORIENTED_EDGE('',*,*,#489616,.T.); +#489616 = EDGE_CURVE('',#489608,#489617,#489619,.T.); +#489617 = VERTEX_POINT('',#489618); +#489618 = CARTESIAN_POINT('',(153.0125,-102.125,1.56)); +#489619 = LINE('',#489620,#489621); +#489620 = CARTESIAN_POINT('',(151.5875,-102.125,1.56)); +#489621 = VECTOR('',#489622,1.); +#489622 = DIRECTION('',(1.,0.,0.)); +#489623 = ORIENTED_EDGE('',*,*,#489624,.T.); +#489624 = EDGE_CURVE('',#489617,#489625,#489627,.T.); +#489625 = VERTEX_POINT('',#489626); +#489626 = CARTESIAN_POINT('',(153.2,-101.9375,1.56)); +#489627 = CIRCLE('',#489628,0.187498366229); +#489628 = AXIS2_PLACEMENT_3D('',#489629,#489630,#489631); +#489629 = CARTESIAN_POINT('',(153.01250163377,-101.9375016337,1.56)); +#489630 = DIRECTION('',(0.,0.,1.)); +#489631 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#489632 = ORIENTED_EDGE('',*,*,#489633,.T.); +#489633 = EDGE_CURVE('',#489625,#489572,#489634,.T.); +#489634 = LINE('',#489635,#489636); +#489635 = CARTESIAN_POINT('',(153.2,-101.9375,1.56)); +#489636 = VECTOR('',#489637,1.); +#489637 = DIRECTION('',(0.,1.,0.)); +#489638 = FACE_BOUND('',#489639,.F.); +#489639 = EDGE_LOOP('',(#489640)); +#489640 = ORIENTED_EDGE('',*,*,#489641,.T.); +#489641 = EDGE_CURVE('',#489642,#489642,#489644,.T.); +#489642 = VERTEX_POINT('',#489643); +#489643 = CARTESIAN_POINT('',(132.55,-100.25,1.56)); +#489644 = CIRCLE('',#489645,1.375); +#489645 = AXIS2_PLACEMENT_3D('',#489646,#489647,#489648); +#489646 = CARTESIAN_POINT('',(131.175,-100.25,1.56)); +#489647 = DIRECTION('',(0.,0.,1.)); +#489648 = DIRECTION('',(1.,0.,-0.)); +#489649 = FACE_BOUND('',#489650,.F.); +#489650 = EDGE_LOOP('',(#489651)); +#489651 = ORIENTED_EDGE('',*,*,#489652,.T.); +#489652 = EDGE_CURVE('',#489653,#489653,#489655,.T.); +#489653 = VERTEX_POINT('',#489654); +#489654 = CARTESIAN_POINT('',(145.2,-100.25,1.56)); +#489655 = CIRCLE('',#489656,1.375); +#489656 = AXIS2_PLACEMENT_3D('',#489657,#489658,#489659); +#489657 = CARTESIAN_POINT('',(143.825,-100.25,1.56)); +#489658 = DIRECTION('',(0.,0.,1.)); +#489659 = DIRECTION('',(1.,0.,-0.)); +#489660 = FACE_BOUND('',#489661,.F.); +#489661 = EDGE_LOOP('',(#489662,#489673,#489681,#489690,#489698,#489707, + #489715,#489724)); +#489662 = ORIENTED_EDGE('',*,*,#489663,.T.); +#489663 = EDGE_CURVE('',#489664,#489666,#489668,.T.); +#489664 = VERTEX_POINT('',#489665); +#489665 = CARTESIAN_POINT('',(123.55,-100.375,1.56)); +#489666 = VERTEX_POINT('',#489667); +#489667 = CARTESIAN_POINT('',(123.4,-100.225,1.56)); +#489668 = CIRCLE('',#489669,0.150000058649); +#489669 = AXIS2_PLACEMENT_3D('',#489670,#489671,#489672); +#489670 = CARTESIAN_POINT('',(123.39999994135,-100.3750000586,1.56)); +#489671 = DIRECTION('',(0.,0.,1.)); +#489672 = DIRECTION('',(1.,3.90995314237E-07,-0.)); +#489673 = ORIENTED_EDGE('',*,*,#489674,.T.); +#489674 = EDGE_CURVE('',#489666,#489675,#489677,.T.); +#489675 = VERTEX_POINT('',#489676); +#489676 = CARTESIAN_POINT('',(121.9,-100.225,1.56)); +#489677 = LINE('',#489678,#489679); +#489678 = CARTESIAN_POINT('',(123.4,-100.225,1.56)); +#489679 = VECTOR('',#489680,1.); +#489680 = DIRECTION('',(-1.,0.,0.)); +#489681 = ORIENTED_EDGE('',*,*,#489682,.T.); +#489682 = EDGE_CURVE('',#489675,#489683,#489685,.T.); +#489683 = VERTEX_POINT('',#489684); +#489684 = CARTESIAN_POINT('',(121.75,-100.375,1.56)); +#489685 = CIRCLE('',#489686,0.150000058649); +#489686 = AXIS2_PLACEMENT_3D('',#489687,#489688,#489689); +#489687 = CARTESIAN_POINT('',(121.90000005864,-100.3750000586,1.56)); +#489688 = DIRECTION('',(0.,0.,1.)); +#489689 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#489690 = ORIENTED_EDGE('',*,*,#489691,.T.); +#489691 = EDGE_CURVE('',#489683,#489692,#489694,.T.); +#489692 = VERTEX_POINT('',#489693); +#489693 = CARTESIAN_POINT('',(121.75,-100.675,1.56)); +#489694 = LINE('',#489695,#489696); +#489695 = CARTESIAN_POINT('',(121.75,-100.375,1.56)); +#489696 = VECTOR('',#489697,1.); +#489697 = DIRECTION('',(0.,-1.,0.)); +#489698 = ORIENTED_EDGE('',*,*,#489699,.T.); +#489699 = EDGE_CURVE('',#489692,#489700,#489702,.T.); +#489700 = VERTEX_POINT('',#489701); +#489701 = CARTESIAN_POINT('',(121.9,-100.825,1.56)); +#489702 = CIRCLE('',#489703,0.150000058649); +#489703 = AXIS2_PLACEMENT_3D('',#489704,#489705,#489706); +#489704 = CARTESIAN_POINT('',(121.90000005864,-100.6749999413,1.56)); +#489705 = DIRECTION('',(0.,0.,1.)); +#489706 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#489707 = ORIENTED_EDGE('',*,*,#489708,.T.); +#489708 = EDGE_CURVE('',#489700,#489709,#489711,.T.); +#489709 = VERTEX_POINT('',#489710); +#489710 = CARTESIAN_POINT('',(123.4,-100.825,1.56)); +#489711 = LINE('',#489712,#489713); +#489712 = CARTESIAN_POINT('',(121.9,-100.825,1.56)); +#489713 = VECTOR('',#489714,1.); +#489714 = DIRECTION('',(1.,0.,0.)); +#489715 = ORIENTED_EDGE('',*,*,#489716,.T.); +#489716 = EDGE_CURVE('',#489709,#489717,#489719,.T.); +#489717 = VERTEX_POINT('',#489718); +#489718 = CARTESIAN_POINT('',(123.55,-100.675,1.56)); +#489719 = CIRCLE('',#489720,0.150000058649); +#489720 = AXIS2_PLACEMENT_3D('',#489721,#489722,#489723); +#489721 = CARTESIAN_POINT('',(123.39999994135,-100.6749999413,1.56)); +#489722 = DIRECTION('',(0.,0.,1.)); +#489723 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#489724 = ORIENTED_EDGE('',*,*,#489725,.T.); +#489725 = EDGE_CURVE('',#489717,#489664,#489726,.T.); +#489726 = LINE('',#489727,#489728); +#489727 = CARTESIAN_POINT('',(123.55,-100.675,1.56)); +#489728 = VECTOR('',#489729,1.); +#489729 = DIRECTION('',(0.,1.,0.)); +#489730 = FACE_BOUND('',#489731,.F.); +#489731 = EDGE_LOOP('',(#489732,#489743,#489751,#489760,#489768,#489777, + #489785,#489794)); +#489732 = ORIENTED_EDGE('',*,*,#489733,.T.); +#489733 = EDGE_CURVE('',#489734,#489736,#489738,.T.); +#489734 = VERTEX_POINT('',#489735); +#489735 = CARTESIAN_POINT('',(153.2,-100.375,1.56)); +#489736 = VERTEX_POINT('',#489737); +#489737 = CARTESIAN_POINT('',(153.05,-100.225,1.56)); +#489738 = CIRCLE('',#489739,0.150000058649); +#489739 = AXIS2_PLACEMENT_3D('',#489740,#489741,#489742); +#489740 = CARTESIAN_POINT('',(153.04999994135,-100.3750000586,1.56)); +#489741 = DIRECTION('',(0.,0.,1.)); +#489742 = DIRECTION('',(1.,3.90995124759E-07,-0.)); +#489743 = ORIENTED_EDGE('',*,*,#489744,.T.); +#489744 = EDGE_CURVE('',#489736,#489745,#489747,.T.); +#489745 = VERTEX_POINT('',#489746); +#489746 = CARTESIAN_POINT('',(151.55,-100.225,1.56)); +#489747 = LINE('',#489748,#489749); +#489748 = CARTESIAN_POINT('',(153.05,-100.225,1.56)); +#489749 = VECTOR('',#489750,1.); +#489750 = DIRECTION('',(-1.,0.,0.)); +#489751 = ORIENTED_EDGE('',*,*,#489752,.T.); +#489752 = EDGE_CURVE('',#489745,#489753,#489755,.T.); +#489753 = VERTEX_POINT('',#489754); +#489754 = CARTESIAN_POINT('',(151.4,-100.375,1.56)); +#489755 = CIRCLE('',#489756,0.150000058649); +#489756 = AXIS2_PLACEMENT_3D('',#489757,#489758,#489759); +#489757 = CARTESIAN_POINT('',(151.55000005864,-100.3750000586,1.56)); +#489758 = DIRECTION('',(0.,0.,1.)); +#489759 = DIRECTION('',(-3.909955984539E-07,1.,0.)); +#489760 = ORIENTED_EDGE('',*,*,#489761,.T.); +#489761 = EDGE_CURVE('',#489753,#489762,#489764,.T.); +#489762 = VERTEX_POINT('',#489763); +#489763 = CARTESIAN_POINT('',(151.4,-100.675,1.56)); +#489764 = LINE('',#489765,#489766); +#489765 = CARTESIAN_POINT('',(151.4,-100.375,1.56)); +#489766 = VECTOR('',#489767,1.); +#489767 = DIRECTION('',(0.,-1.,0.)); +#489768 = ORIENTED_EDGE('',*,*,#489769,.T.); +#489769 = EDGE_CURVE('',#489762,#489770,#489772,.T.); +#489770 = VERTEX_POINT('',#489771); +#489771 = CARTESIAN_POINT('',(151.55,-100.825,1.56)); +#489772 = CIRCLE('',#489773,0.150000058649); +#489773 = AXIS2_PLACEMENT_3D('',#489774,#489775,#489776); +#489774 = CARTESIAN_POINT('',(151.55000005864,-100.6749999413,1.56)); +#489775 = DIRECTION('',(0.,0.,1.)); +#489776 = DIRECTION('',(-1.,-3.909955037148E-07,0.)); +#489777 = ORIENTED_EDGE('',*,*,#489778,.T.); +#489778 = EDGE_CURVE('',#489770,#489779,#489781,.T.); +#489779 = VERTEX_POINT('',#489780); +#489780 = CARTESIAN_POINT('',(153.05,-100.825,1.56)); +#489781 = LINE('',#489782,#489783); +#489782 = CARTESIAN_POINT('',(151.55,-100.825,1.56)); +#489783 = VECTOR('',#489784,1.); +#489784 = DIRECTION('',(1.,0.,0.)); +#489785 = ORIENTED_EDGE('',*,*,#489786,.T.); +#489786 = EDGE_CURVE('',#489779,#489787,#489789,.T.); +#489787 = VERTEX_POINT('',#489788); +#489788 = CARTESIAN_POINT('',(153.2,-100.675,1.56)); +#489789 = CIRCLE('',#489790,0.150000058649); +#489790 = AXIS2_PLACEMENT_3D('',#489791,#489792,#489793); +#489791 = CARTESIAN_POINT('',(153.04999994135,-100.6749999413,1.56)); +#489792 = DIRECTION('',(0.,0.,1.)); +#489793 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#489794 = ORIENTED_EDGE('',*,*,#489795,.T.); +#489795 = EDGE_CURVE('',#489787,#489734,#489796,.T.); +#489796 = LINE('',#489797,#489798); +#489797 = CARTESIAN_POINT('',(153.2,-100.675,1.56)); +#489798 = VECTOR('',#489799,1.); +#489799 = DIRECTION('',(0.,1.,0.)); +#489800 = FACE_BOUND('',#489801,.F.); +#489801 = EDGE_LOOP('',(#489802,#489813,#489821,#489830,#489838,#489847, + #489855,#489864)); +#489802 = ORIENTED_EDGE('',*,*,#489803,.T.); +#489803 = EDGE_CURVE('',#489804,#489806,#489808,.T.); +#489804 = VERTEX_POINT('',#489805); +#489805 = CARTESIAN_POINT('',(123.55,-99.1125,1.56)); +#489806 = VERTEX_POINT('',#489807); +#489807 = CARTESIAN_POINT('',(123.3625,-98.925,1.56)); +#489808 = CIRCLE('',#489809,0.187498366229); +#489809 = AXIS2_PLACEMENT_3D('',#489810,#489811,#489812); +#489810 = CARTESIAN_POINT('',(123.36250163377,-99.11249836622,1.56)); +#489811 = DIRECTION('',(0.,0.,1.)); +#489812 = DIRECTION('',(0.999999999962,-8.713558354919E-06,0.)); +#489813 = ORIENTED_EDGE('',*,*,#489814,.T.); +#489814 = EDGE_CURVE('',#489806,#489815,#489817,.T.); +#489815 = VERTEX_POINT('',#489816); +#489816 = CARTESIAN_POINT('',(121.9375,-98.925,1.56)); +#489817 = LINE('',#489818,#489819); +#489818 = CARTESIAN_POINT('',(123.3625,-98.925,1.56)); +#489819 = VECTOR('',#489820,1.); +#489820 = DIRECTION('',(-1.,0.,0.)); +#489821 = ORIENTED_EDGE('',*,*,#489822,.T.); +#489822 = EDGE_CURVE('',#489815,#489823,#489825,.T.); +#489823 = VERTEX_POINT('',#489824); +#489824 = CARTESIAN_POINT('',(121.75,-99.1125,1.56)); +#489825 = CIRCLE('',#489826,0.187498366229); +#489826 = AXIS2_PLACEMENT_3D('',#489827,#489828,#489829); +#489827 = CARTESIAN_POINT('',(121.93749836622,-99.11249836622,1.56)); +#489828 = DIRECTION('',(0.,0.,1.)); +#489829 = DIRECTION('',(8.713558430711E-06,0.999999999962,-0.)); +#489830 = ORIENTED_EDGE('',*,*,#489831,.T.); +#489831 = EDGE_CURVE('',#489823,#489832,#489834,.T.); +#489832 = VERTEX_POINT('',#489833); +#489833 = CARTESIAN_POINT('',(121.75,-99.4875,1.56)); +#489834 = LINE('',#489835,#489836); +#489835 = CARTESIAN_POINT('',(121.75,-99.1125,1.56)); +#489836 = VECTOR('',#489837,1.); +#489837 = DIRECTION('',(0.,-1.,0.)); +#489838 = ORIENTED_EDGE('',*,*,#489839,.T.); +#489839 = EDGE_CURVE('',#489832,#489840,#489842,.T.); +#489840 = VERTEX_POINT('',#489841); +#489841 = CARTESIAN_POINT('',(121.9375,-99.675,1.56)); +#489842 = CIRCLE('',#489843,0.187498366229); +#489843 = AXIS2_PLACEMENT_3D('',#489844,#489845,#489846); +#489844 = CARTESIAN_POINT('',(121.93749836622,-99.48750163377,1.56)); +#489845 = DIRECTION('',(0.,0.,1.)); +#489846 = DIRECTION('',(-0.999999999962,8.713558354919E-06,0.)); +#489847 = ORIENTED_EDGE('',*,*,#489848,.T.); +#489848 = EDGE_CURVE('',#489840,#489849,#489851,.T.); +#489849 = VERTEX_POINT('',#489850); +#489850 = CARTESIAN_POINT('',(123.3625,-99.675,1.56)); +#489851 = LINE('',#489852,#489853); +#489852 = CARTESIAN_POINT('',(121.9375,-99.675,1.56)); +#489853 = VECTOR('',#489854,1.); +#489854 = DIRECTION('',(1.,0.,0.)); +#489855 = ORIENTED_EDGE('',*,*,#489856,.T.); +#489856 = EDGE_CURVE('',#489849,#489857,#489859,.T.); +#489857 = VERTEX_POINT('',#489858); +#489858 = CARTESIAN_POINT('',(123.55,-99.4875,1.56)); +#489859 = CIRCLE('',#489860,0.187498366229); +#489860 = AXIS2_PLACEMENT_3D('',#489861,#489862,#489863); +#489861 = CARTESIAN_POINT('',(123.36250163377,-99.48750163377,1.56)); +#489862 = DIRECTION('',(0.,0.,1.)); +#489863 = DIRECTION('',(-8.713558354919E-06,-0.999999999962,0.)); +#489864 = ORIENTED_EDGE('',*,*,#489865,.T.); +#489865 = EDGE_CURVE('',#489857,#489804,#489866,.T.); +#489866 = LINE('',#489867,#489868); +#489867 = CARTESIAN_POINT('',(123.55,-99.4875,1.56)); +#489868 = VECTOR('',#489869,1.); +#489869 = DIRECTION('',(0.,1.,0.)); +#489870 = FACE_BOUND('',#489871,.F.); +#489871 = EDGE_LOOP('',(#489872,#489883,#489891,#489900,#489908,#489917, + #489925,#489934)); +#489872 = ORIENTED_EDGE('',*,*,#489873,.T.); +#489873 = EDGE_CURVE('',#489874,#489876,#489878,.T.); +#489874 = VERTEX_POINT('',#489875); +#489875 = CARTESIAN_POINT('',(153.2,-99.1125,1.56)); +#489876 = VERTEX_POINT('',#489877); +#489877 = CARTESIAN_POINT('',(153.0125,-98.925,1.56)); +#489878 = CIRCLE('',#489879,0.187498366229); +#489879 = AXIS2_PLACEMENT_3D('',#489880,#489881,#489882); +#489880 = CARTESIAN_POINT('',(153.01250163377,-99.11249836622,1.56)); +#489881 = DIRECTION('',(0.,0.,1.)); +#489882 = DIRECTION('',(0.999999999962,-8.713558506504E-06,0.)); +#489883 = ORIENTED_EDGE('',*,*,#489884,.T.); +#489884 = EDGE_CURVE('',#489876,#489885,#489887,.T.); +#489885 = VERTEX_POINT('',#489886); +#489886 = CARTESIAN_POINT('',(151.5875,-98.925,1.56)); +#489887 = LINE('',#489888,#489889); +#489888 = CARTESIAN_POINT('',(153.0125,-98.925,1.56)); +#489889 = VECTOR('',#489890,1.); +#489890 = DIRECTION('',(-1.,0.,0.)); +#489891 = ORIENTED_EDGE('',*,*,#489892,.T.); +#489892 = EDGE_CURVE('',#489885,#489893,#489895,.T.); +#489893 = VERTEX_POINT('',#489894); +#489894 = CARTESIAN_POINT('',(151.4,-99.1125,1.56)); +#489895 = CIRCLE('',#489896,0.187498366229); +#489896 = AXIS2_PLACEMENT_3D('',#489897,#489898,#489899); +#489897 = CARTESIAN_POINT('',(151.58749836622,-99.11249836622,1.56)); +#489898 = DIRECTION('',(0.,0.,1.)); +#489899 = DIRECTION('',(8.713558582296E-06,0.999999999962,-0.)); +#489900 = ORIENTED_EDGE('',*,*,#489901,.T.); +#489901 = EDGE_CURVE('',#489893,#489902,#489904,.T.); +#489902 = VERTEX_POINT('',#489903); +#489903 = CARTESIAN_POINT('',(151.4,-99.4875,1.56)); +#489904 = LINE('',#489905,#489906); +#489905 = CARTESIAN_POINT('',(151.4,-99.1125,1.56)); +#489906 = VECTOR('',#489907,1.); +#489907 = DIRECTION('',(0.,-1.,0.)); +#489908 = ORIENTED_EDGE('',*,*,#489909,.T.); +#489909 = EDGE_CURVE('',#489902,#489910,#489912,.T.); +#489910 = VERTEX_POINT('',#489911); +#489911 = CARTESIAN_POINT('',(151.5875,-99.675,1.56)); +#489912 = CIRCLE('',#489913,0.187498366229); +#489913 = AXIS2_PLACEMENT_3D('',#489914,#489915,#489916); +#489914 = CARTESIAN_POINT('',(151.58749836622,-99.48750163377,1.56)); +#489915 = DIRECTION('',(0.,0.,1.)); +#489916 = DIRECTION('',(-0.999999999962,8.713558506504E-06,0.)); +#489917 = ORIENTED_EDGE('',*,*,#489918,.T.); +#489918 = EDGE_CURVE('',#489910,#489919,#489921,.T.); +#489919 = VERTEX_POINT('',#489920); +#489920 = CARTESIAN_POINT('',(153.0125,-99.675,1.56)); +#489921 = LINE('',#489922,#489923); +#489922 = CARTESIAN_POINT('',(151.5875,-99.675,1.56)); +#489923 = VECTOR('',#489924,1.); +#489924 = DIRECTION('',(1.,0.,0.)); +#489925 = ORIENTED_EDGE('',*,*,#489926,.T.); +#489926 = EDGE_CURVE('',#489919,#489927,#489929,.T.); +#489927 = VERTEX_POINT('',#489928); +#489928 = CARTESIAN_POINT('',(153.2,-99.4875,1.56)); +#489929 = CIRCLE('',#489930,0.187498366229); +#489930 = AXIS2_PLACEMENT_3D('',#489931,#489932,#489933); +#489931 = CARTESIAN_POINT('',(153.01250163377,-99.48750163377,1.56)); +#489932 = DIRECTION('',(0.,0.,1.)); +#489933 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#489934 = ORIENTED_EDGE('',*,*,#489935,.T.); +#489935 = EDGE_CURVE('',#489927,#489874,#489936,.T.); +#489936 = LINE('',#489937,#489938); +#489937 = CARTESIAN_POINT('',(153.2,-99.4875,1.56)); +#489938 = VECTOR('',#489939,1.); +#489939 = DIRECTION('',(0.,1.,0.)); +#489940 = FACE_BOUND('',#489941,.F.); +#489941 = EDGE_LOOP('',(#489942,#489953,#489961,#489970,#489978,#489987, + #489995,#490004)); +#489942 = ORIENTED_EDGE('',*,*,#489943,.T.); +#489943 = EDGE_CURVE('',#489944,#489946,#489948,.T.); +#489944 = VERTEX_POINT('',#489945); +#489945 = CARTESIAN_POINT('',(121.15,-98.25,1.56)); +#489946 = VERTEX_POINT('',#489947); +#489947 = CARTESIAN_POINT('',(120.925,-98.025,1.56)); +#489948 = CIRCLE('',#489949,0.225000087974); +#489949 = AXIS2_PLACEMENT_3D('',#489950,#489951,#489952); +#489950 = CARTESIAN_POINT('',(120.92499991202,-98.25000008797,1.56)); +#489951 = DIRECTION('',(0.,0.,1.)); +#489952 = DIRECTION('',(1.,3.909954721353E-07,-0.)); +#489953 = ORIENTED_EDGE('',*,*,#489954,.T.); +#489954 = EDGE_CURVE('',#489946,#489955,#489957,.T.); +#489955 = VERTEX_POINT('',#489956); +#489956 = CARTESIAN_POINT('',(120.475,-98.025,1.56)); +#489957 = LINE('',#489958,#489959); +#489958 = CARTESIAN_POINT('',(120.925,-98.025,1.56)); +#489959 = VECTOR('',#489960,1.); +#489960 = DIRECTION('',(-1.,0.,0.)); +#489961 = ORIENTED_EDGE('',*,*,#489962,.T.); +#489962 = EDGE_CURVE('',#489955,#489963,#489965,.T.); +#489963 = VERTEX_POINT('',#489964); +#489964 = CARTESIAN_POINT('',(120.25,-98.25,1.56)); +#489965 = CIRCLE('',#489966,0.225000087974); +#489966 = AXIS2_PLACEMENT_3D('',#489967,#489968,#489969); +#489967 = CARTESIAN_POINT('',(120.47500008797,-98.25000008797,1.56)); +#489968 = DIRECTION('',(0.,0.,1.)); +#489969 = DIRECTION('',(-3.909953458166E-07,1.,0.)); +#489970 = ORIENTED_EDGE('',*,*,#489971,.T.); +#489971 = EDGE_CURVE('',#489963,#489972,#489974,.T.); +#489972 = VERTEX_POINT('',#489973); +#489973 = CARTESIAN_POINT('',(120.25,-99.1,1.56)); +#489974 = LINE('',#489975,#489976); +#489975 = CARTESIAN_POINT('',(120.25,-98.25,1.56)); +#489976 = VECTOR('',#489977,1.); +#489977 = DIRECTION('',(0.,-1.,0.)); +#489978 = ORIENTED_EDGE('',*,*,#489979,.T.); +#489979 = EDGE_CURVE('',#489972,#489980,#489982,.T.); +#489980 = VERTEX_POINT('',#489981); +#489981 = CARTESIAN_POINT('',(120.475,-99.325,1.56)); +#489982 = CIRCLE('',#489983,0.225000087974); +#489983 = AXIS2_PLACEMENT_3D('',#489984,#489985,#489986); +#489984 = CARTESIAN_POINT('',(120.47500008797,-99.09999991202,1.56)); +#489985 = DIRECTION('',(0.,0.,1.)); +#489986 = DIRECTION('',(-1.,-3.90995219498E-07,0.)); +#489987 = ORIENTED_EDGE('',*,*,#489988,.T.); +#489988 = EDGE_CURVE('',#489980,#489989,#489991,.T.); +#489989 = VERTEX_POINT('',#489990); +#489990 = CARTESIAN_POINT('',(120.925,-99.325,1.56)); +#489991 = LINE('',#489992,#489993); +#489992 = CARTESIAN_POINT('',(120.475,-99.325,1.56)); +#489993 = VECTOR('',#489994,1.); +#489994 = DIRECTION('',(1.,0.,0.)); +#489995 = ORIENTED_EDGE('',*,*,#489996,.T.); +#489996 = EDGE_CURVE('',#489989,#489997,#489999,.T.); +#489997 = VERTEX_POINT('',#489998); +#489998 = CARTESIAN_POINT('',(121.15,-99.1,1.56)); +#489999 = CIRCLE('',#490000,0.225000087974); +#490000 = AXIS2_PLACEMENT_3D('',#490001,#490002,#490003); +#490001 = CARTESIAN_POINT('',(120.92499991202,-99.09999991202,1.56)); +#490002 = DIRECTION('',(0.,0.,1.)); +#490003 = DIRECTION('',(3.909953458166E-07,-1.,0.)); +#490004 = ORIENTED_EDGE('',*,*,#490005,.T.); +#490005 = EDGE_CURVE('',#489997,#489944,#490006,.T.); +#490006 = LINE('',#490007,#490008); +#490007 = CARTESIAN_POINT('',(121.15,-99.1,1.56)); +#490008 = VECTOR('',#490009,1.); +#490009 = DIRECTION('',(0.,1.,0.)); +#490010 = FACE_BOUND('',#490011,.F.); +#490011 = EDGE_LOOP('',(#490012,#490023,#490031,#490040,#490048,#490057, + #490065,#490074)); +#490012 = ORIENTED_EDGE('',*,*,#490013,.T.); +#490013 = EDGE_CURVE('',#490014,#490016,#490018,.T.); +#490014 = VERTEX_POINT('',#490015); +#490015 = CARTESIAN_POINT('',(154.7,-98.25,1.56)); +#490016 = VERTEX_POINT('',#490017); +#490017 = CARTESIAN_POINT('',(154.475,-98.025,1.56)); +#490018 = CIRCLE('',#490019,0.225000087974); +#490019 = AXIS2_PLACEMENT_3D('',#490020,#490021,#490022); +#490020 = CARTESIAN_POINT('',(154.47499991202,-98.25000008797,1.56)); +#490021 = DIRECTION('',(0.,0.,1.)); +#490022 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#490023 = ORIENTED_EDGE('',*,*,#490024,.T.); +#490024 = EDGE_CURVE('',#490016,#490025,#490027,.T.); +#490025 = VERTEX_POINT('',#490026); +#490026 = CARTESIAN_POINT('',(154.025,-98.025,1.56)); +#490027 = LINE('',#490028,#490029); +#490028 = CARTESIAN_POINT('',(154.475,-98.025,1.56)); +#490029 = VECTOR('',#490030,1.); +#490030 = DIRECTION('',(-1.,0.,0.)); +#490031 = ORIENTED_EDGE('',*,*,#490032,.T.); +#490032 = EDGE_CURVE('',#490025,#490033,#490035,.T.); +#490033 = VERTEX_POINT('',#490034); +#490034 = CARTESIAN_POINT('',(153.8,-98.25,1.56)); +#490035 = CIRCLE('',#490036,0.225000087974); +#490036 = AXIS2_PLACEMENT_3D('',#490037,#490038,#490039); +#490037 = CARTESIAN_POINT('',(154.02500008797,-98.25000008797,1.56)); +#490038 = DIRECTION('',(0.,0.,1.)); +#490039 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#490040 = ORIENTED_EDGE('',*,*,#490041,.T.); +#490041 = EDGE_CURVE('',#490033,#490042,#490044,.T.); +#490042 = VERTEX_POINT('',#490043); +#490043 = CARTESIAN_POINT('',(153.8,-99.1,1.56)); +#490044 = LINE('',#490045,#490046); +#490045 = CARTESIAN_POINT('',(153.8,-98.25,1.56)); +#490046 = VECTOR('',#490047,1.); +#490047 = DIRECTION('',(0.,-1.,0.)); +#490048 = ORIENTED_EDGE('',*,*,#490049,.T.); +#490049 = EDGE_CURVE('',#490042,#490050,#490052,.T.); +#490050 = VERTEX_POINT('',#490051); +#490051 = CARTESIAN_POINT('',(154.025,-99.325,1.56)); +#490052 = CIRCLE('',#490053,0.225000087974); +#490053 = AXIS2_PLACEMENT_3D('',#490054,#490055,#490056); +#490054 = CARTESIAN_POINT('',(154.02500008797,-99.09999991202,1.56)); +#490055 = DIRECTION('',(0.,0.,1.)); +#490056 = DIRECTION('',(-1.,-3.90995219498E-07,0.)); +#490057 = ORIENTED_EDGE('',*,*,#490058,.T.); +#490058 = EDGE_CURVE('',#490050,#490059,#490061,.T.); +#490059 = VERTEX_POINT('',#490060); +#490060 = CARTESIAN_POINT('',(154.475,-99.325,1.56)); +#490061 = LINE('',#490062,#490063); +#490062 = CARTESIAN_POINT('',(154.025,-99.325,1.56)); +#490063 = VECTOR('',#490064,1.); +#490064 = DIRECTION('',(1.,0.,0.)); +#490065 = ORIENTED_EDGE('',*,*,#490066,.T.); +#490066 = EDGE_CURVE('',#490059,#490067,#490069,.T.); +#490067 = VERTEX_POINT('',#490068); +#490068 = CARTESIAN_POINT('',(154.7,-99.1,1.56)); +#490069 = CIRCLE('',#490070,0.225000087974); +#490070 = AXIS2_PLACEMENT_3D('',#490071,#490072,#490073); +#490071 = CARTESIAN_POINT('',(154.47499991202,-99.09999991202,1.56)); +#490072 = DIRECTION('',(0.,0.,1.)); +#490073 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#490074 = ORIENTED_EDGE('',*,*,#490075,.T.); +#490075 = EDGE_CURVE('',#490067,#490014,#490076,.T.); +#490076 = LINE('',#490077,#490078); +#490077 = CARTESIAN_POINT('',(154.7,-99.1,1.56)); +#490078 = VECTOR('',#490079,1.); +#490079 = DIRECTION('',(0.,1.,0.)); +#490080 = FACE_BOUND('',#490081,.F.); +#490081 = EDGE_LOOP('',(#490082)); +#490082 = ORIENTED_EDGE('',*,*,#490083,.T.); +#490083 = EDGE_CURVE('',#490084,#490084,#490086,.T.); +#490084 = VERTEX_POINT('',#490085); +#490085 = CARTESIAN_POINT('',(147.354999,-97.75,1.56)); +#490086 = CIRCLE('',#490087,1.124999); +#490087 = AXIS2_PLACEMENT_3D('',#490088,#490089,#490090); +#490088 = CARTESIAN_POINT('',(146.23,-97.75,1.56)); +#490089 = DIRECTION('',(0.,0.,1.)); +#490090 = DIRECTION('',(1.,0.,-0.)); +#490091 = FACE_BOUND('',#490092,.F.); +#490092 = EDGE_LOOP('',(#490093)); +#490093 = ORIENTED_EDGE('',*,*,#490094,.T.); +#490094 = EDGE_CURVE('',#490095,#490095,#490097,.T.); +#490095 = VERTEX_POINT('',#490096); +#490096 = CARTESIAN_POINT('',(122.2,-98.4,1.56)); +#490097 = CIRCLE('',#490098,0.45); +#490098 = AXIS2_PLACEMENT_3D('',#490099,#490100,#490101); +#490099 = CARTESIAN_POINT('',(121.75,-98.4,1.56)); +#490100 = DIRECTION('',(0.,0.,1.)); +#490101 = DIRECTION('',(1.,0.,-0.)); +#490102 = FACE_BOUND('',#490103,.F.); +#490103 = EDGE_LOOP('',(#490104)); +#490104 = ORIENTED_EDGE('',*,*,#490105,.T.); +#490105 = EDGE_CURVE('',#490106,#490106,#490108,.T.); +#490106 = VERTEX_POINT('',#490107); +#490107 = CARTESIAN_POINT('',(153.65,-98.4,1.56)); +#490108 = CIRCLE('',#490109,0.45); +#490109 = AXIS2_PLACEMENT_3D('',#490110,#490111,#490112); +#490110 = CARTESIAN_POINT('',(153.2,-98.4,1.56)); +#490111 = DIRECTION('',(0.,0.,1.)); +#490112 = DIRECTION('',(1.,0.,-0.)); +#490113 = FACE_BOUND('',#490114,.F.); +#490114 = EDGE_LOOP('',(#490115)); +#490115 = ORIENTED_EDGE('',*,*,#490116,.T.); +#490116 = EDGE_CURVE('',#490117,#490117,#490119,.T.); +#490117 = VERTEX_POINT('',#490118); +#490118 = CARTESIAN_POINT('',(147.354999,-95.25,1.56)); +#490119 = CIRCLE('',#490120,1.124999); +#490120 = AXIS2_PLACEMENT_3D('',#490121,#490122,#490123); +#490121 = CARTESIAN_POINT('',(146.23,-95.25,1.56)); +#490122 = DIRECTION('',(0.,0.,1.)); +#490123 = DIRECTION('',(1.,0.,-0.)); +#490124 = FACE_BOUND('',#490125,.F.); +#490125 = EDGE_LOOP('',(#490126)); +#490126 = ORIENTED_EDGE('',*,*,#490127,.T.); +#490127 = EDGE_CURVE('',#490128,#490128,#490130,.T.); +#490128 = VERTEX_POINT('',#490129); +#490129 = CARTESIAN_POINT('',(123.999999,-95.,1.56)); +#490130 = CIRCLE('',#490131,0.999999); +#490131 = AXIS2_PLACEMENT_3D('',#490132,#490133,#490134); +#490132 = CARTESIAN_POINT('',(123.,-95.,1.56)); +#490133 = DIRECTION('',(0.,0.,1.)); +#490134 = DIRECTION('',(1.,0.,-0.)); +#490135 = FACE_BOUND('',#490136,.F.); +#490136 = EDGE_LOOP('',(#490137)); +#490137 = ORIENTED_EDGE('',*,*,#490138,.T.); +#490138 = EDGE_CURVE('',#490139,#490139,#490141,.T.); +#490139 = VERTEX_POINT('',#490140); +#490140 = CARTESIAN_POINT('',(147.354999,-92.75,1.56)); +#490141 = CIRCLE('',#490142,1.124999); +#490142 = AXIS2_PLACEMENT_3D('',#490143,#490144,#490145); +#490143 = CARTESIAN_POINT('',(146.23,-92.75,1.56)); +#490144 = DIRECTION('',(0.,0.,1.)); +#490145 = DIRECTION('',(1.,0.,-0.)); +#490146 = FACE_BOUND('',#490147,.F.); +#490147 = EDGE_LOOP('',(#490148,#490159,#490167,#490176,#490184,#490193, + #490201,#490210)); +#490148 = ORIENTED_EDGE('',*,*,#490149,.T.); +#490149 = EDGE_CURVE('',#490150,#490152,#490154,.T.); +#490150 = VERTEX_POINT('',#490151); +#490151 = CARTESIAN_POINT('',(148.81,-93.34,1.56)); +#490152 = VERTEX_POINT('',#490153); +#490153 = CARTESIAN_POINT('',(148.67,-93.2,1.56)); +#490154 = CIRCLE('',#490155,0.139999827125); +#490155 = AXIS2_PLACEMENT_3D('',#490156,#490157,#490158); +#490156 = CARTESIAN_POINT('',(148.67000017287,-93.33999982712,1.56)); +#490157 = DIRECTION('',(0.,0.,1.)); +#490158 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#490159 = ORIENTED_EDGE('',*,*,#490160,.T.); +#490160 = EDGE_CURVE('',#490152,#490161,#490163,.T.); +#490161 = VERTEX_POINT('',#490162); +#490162 = CARTESIAN_POINT('',(148.33,-93.2,1.56)); +#490163 = LINE('',#490164,#490165); +#490164 = CARTESIAN_POINT('',(148.67,-93.2,1.56)); +#490165 = VECTOR('',#490166,1.); +#490166 = DIRECTION('',(-1.,0.,0.)); +#490167 = ORIENTED_EDGE('',*,*,#490168,.T.); +#490168 = EDGE_CURVE('',#490161,#490169,#490171,.T.); +#490169 = VERTEX_POINT('',#490170); +#490170 = CARTESIAN_POINT('',(148.19,-93.34,1.56)); +#490171 = CIRCLE('',#490172,0.139999827125); +#490172 = AXIS2_PLACEMENT_3D('',#490173,#490174,#490175); +#490173 = CARTESIAN_POINT('',(148.32999982712,-93.33999982712,1.56)); +#490174 = DIRECTION('',(0.,0.,1.)); +#490175 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#490176 = ORIENTED_EDGE('',*,*,#490177,.T.); +#490177 = EDGE_CURVE('',#490169,#490178,#490180,.T.); +#490178 = VERTEX_POINT('',#490179); +#490179 = CARTESIAN_POINT('',(148.19,-93.62,1.56)); +#490180 = LINE('',#490181,#490182); +#490181 = CARTESIAN_POINT('',(148.19,-93.34,1.56)); +#490182 = VECTOR('',#490183,1.); +#490183 = DIRECTION('',(0.,-1.,0.)); +#490184 = ORIENTED_EDGE('',*,*,#490185,.T.); +#490185 = EDGE_CURVE('',#490178,#490186,#490188,.T.); +#490186 = VERTEX_POINT('',#490187); +#490187 = CARTESIAN_POINT('',(148.33,-93.76,1.56)); +#490188 = CIRCLE('',#490189,0.139999827125); +#490189 = AXIS2_PLACEMENT_3D('',#490190,#490191,#490192); +#490190 = CARTESIAN_POINT('',(148.32999982712,-93.62000017287,1.56)); +#490191 = DIRECTION('',(0.,0.,1.)); +#490192 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#490193 = ORIENTED_EDGE('',*,*,#490194,.T.); +#490194 = EDGE_CURVE('',#490186,#490195,#490197,.T.); +#490195 = VERTEX_POINT('',#490196); +#490196 = CARTESIAN_POINT('',(148.67,-93.76,1.56)); +#490197 = LINE('',#490198,#490199); +#490198 = CARTESIAN_POINT('',(148.33,-93.76,1.56)); +#490199 = VECTOR('',#490200,1.); +#490200 = DIRECTION('',(1.,0.,0.)); +#490201 = ORIENTED_EDGE('',*,*,#490202,.T.); +#490202 = EDGE_CURVE('',#490195,#490203,#490205,.T.); +#490203 = VERTEX_POINT('',#490204); +#490204 = CARTESIAN_POINT('',(148.81,-93.62,1.56)); +#490205 = CIRCLE('',#490206,0.139999827125); +#490206 = AXIS2_PLACEMENT_3D('',#490207,#490208,#490209); +#490207 = CARTESIAN_POINT('',(148.67000017287,-93.62000017287,1.56)); +#490208 = DIRECTION('',(0.,0.,1.)); +#490209 = DIRECTION('',(-1.234820451253E-06,-0.999999999999,0.)); +#490210 = ORIENTED_EDGE('',*,*,#490211,.T.); +#490211 = EDGE_CURVE('',#490203,#490150,#490212,.T.); +#490212 = LINE('',#490213,#490214); +#490213 = CARTESIAN_POINT('',(148.81,-93.62,1.56)); +#490214 = VECTOR('',#490215,1.); +#490215 = DIRECTION('',(0.,1.,0.)); +#490216 = FACE_BOUND('',#490217,.F.); +#490217 = EDGE_LOOP('',(#490218)); +#490218 = ORIENTED_EDGE('',*,*,#490219,.T.); +#490219 = EDGE_CURVE('',#490220,#490220,#490222,.T.); +#490220 = VERTEX_POINT('',#490221); +#490221 = CARTESIAN_POINT('',(122.2,-92.625,1.56)); +#490222 = CIRCLE('',#490223,0.45); +#490223 = AXIS2_PLACEMENT_3D('',#490224,#490225,#490226); +#490224 = CARTESIAN_POINT('',(121.75,-92.625,1.56)); +#490225 = DIRECTION('',(0.,0.,1.)); +#490226 = DIRECTION('',(1.,0.,-0.)); +#490227 = FACE_BOUND('',#490228,.F.); +#490228 = EDGE_LOOP('',(#490229)); +#490229 = ORIENTED_EDGE('',*,*,#490230,.T.); +#490230 = EDGE_CURVE('',#490231,#490231,#490233,.T.); +#490231 = VERTEX_POINT('',#490232); +#490232 = CARTESIAN_POINT('',(153.65,-92.625,1.56)); +#490233 = CIRCLE('',#490234,0.45); +#490234 = AXIS2_PLACEMENT_3D('',#490235,#490236,#490237); +#490235 = CARTESIAN_POINT('',(153.2,-92.625,1.56)); +#490236 = DIRECTION('',(0.,0.,1.)); +#490237 = DIRECTION('',(1.,0.,-0.)); +#490238 = FACE_BOUND('',#490239,.F.); +#490239 = EDGE_LOOP('',(#490240,#490251,#490259,#490268,#490276,#490285, + #490293,#490302)); +#490240 = ORIENTED_EDGE('',*,*,#490241,.T.); +#490241 = EDGE_CURVE('',#490242,#490244,#490246,.T.); +#490242 = VERTEX_POINT('',#490243); +#490243 = CARTESIAN_POINT('',(121.15,-91.925,1.56)); +#490244 = VERTEX_POINT('',#490245); +#490245 = CARTESIAN_POINT('',(120.925,-91.7,1.56)); +#490246 = CIRCLE('',#490247,0.225000087974); +#490247 = AXIS2_PLACEMENT_3D('',#490248,#490249,#490250); +#490248 = CARTESIAN_POINT('',(120.92499991202,-91.92500008797,1.56)); +#490249 = DIRECTION('',(0.,0.,1.)); +#490250 = DIRECTION('',(1.,3.909954721353E-07,-0.)); +#490251 = ORIENTED_EDGE('',*,*,#490252,.T.); +#490252 = EDGE_CURVE('',#490244,#490253,#490255,.T.); +#490253 = VERTEX_POINT('',#490254); +#490254 = CARTESIAN_POINT('',(120.475,-91.7,1.56)); +#490255 = LINE('',#490256,#490257); +#490256 = CARTESIAN_POINT('',(120.925,-91.7,1.56)); +#490257 = VECTOR('',#490258,1.); +#490258 = DIRECTION('',(-1.,0.,0.)); +#490259 = ORIENTED_EDGE('',*,*,#490260,.T.); +#490260 = EDGE_CURVE('',#490253,#490261,#490263,.T.); +#490261 = VERTEX_POINT('',#490262); +#490262 = CARTESIAN_POINT('',(120.25,-91.925,1.56)); +#490263 = CIRCLE('',#490264,0.225000087974); +#490264 = AXIS2_PLACEMENT_3D('',#490265,#490266,#490267); +#490265 = CARTESIAN_POINT('',(120.47500008797,-91.92500008797,1.56)); +#490266 = DIRECTION('',(0.,0.,1.)); +#490267 = DIRECTION('',(-3.909953458166E-07,1.,0.)); +#490268 = ORIENTED_EDGE('',*,*,#490269,.T.); +#490269 = EDGE_CURVE('',#490261,#490270,#490272,.T.); +#490270 = VERTEX_POINT('',#490271); +#490271 = CARTESIAN_POINT('',(120.25,-92.775,1.56)); +#490272 = LINE('',#490273,#490274); +#490273 = CARTESIAN_POINT('',(120.25,-91.925,1.56)); +#490274 = VECTOR('',#490275,1.); +#490275 = DIRECTION('',(0.,-1.,0.)); +#490276 = ORIENTED_EDGE('',*,*,#490277,.T.); +#490277 = EDGE_CURVE('',#490270,#490278,#490280,.T.); +#490278 = VERTEX_POINT('',#490279); +#490279 = CARTESIAN_POINT('',(120.475,-93.,1.56)); +#490280 = CIRCLE('',#490281,0.225000087974); +#490281 = AXIS2_PLACEMENT_3D('',#490282,#490283,#490284); +#490282 = CARTESIAN_POINT('',(120.47500008797,-92.77499991202,1.56)); +#490283 = DIRECTION('',(0.,0.,1.)); +#490284 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#490285 = ORIENTED_EDGE('',*,*,#490286,.T.); +#490286 = EDGE_CURVE('',#490278,#490287,#490289,.T.); +#490287 = VERTEX_POINT('',#490288); +#490288 = CARTESIAN_POINT('',(120.925,-93.,1.56)); +#490289 = LINE('',#490290,#490291); +#490290 = CARTESIAN_POINT('',(120.475,-93.,1.56)); +#490291 = VECTOR('',#490292,1.); +#490292 = DIRECTION('',(1.,0.,0.)); +#490293 = ORIENTED_EDGE('',*,*,#490294,.T.); +#490294 = EDGE_CURVE('',#490287,#490295,#490297,.T.); +#490295 = VERTEX_POINT('',#490296); +#490296 = CARTESIAN_POINT('',(121.15,-92.775,1.56)); +#490297 = CIRCLE('',#490298,0.225000087974); +#490298 = AXIS2_PLACEMENT_3D('',#490299,#490300,#490301); +#490299 = CARTESIAN_POINT('',(120.92499991202,-92.77499991202,1.56)); +#490300 = DIRECTION('',(0.,0.,1.)); +#490301 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#490302 = ORIENTED_EDGE('',*,*,#490303,.T.); +#490303 = EDGE_CURVE('',#490295,#490242,#490304,.T.); +#490304 = LINE('',#490305,#490306); +#490305 = CARTESIAN_POINT('',(121.15,-92.775,1.56)); +#490306 = VECTOR('',#490307,1.); +#490307 = DIRECTION('',(0.,1.,0.)); +#490308 = FACE_BOUND('',#490309,.F.); +#490309 = EDGE_LOOP('',(#490310,#490321,#490329,#490338,#490346,#490355, + #490363,#490372)); +#490310 = ORIENTED_EDGE('',*,*,#490311,.T.); +#490311 = EDGE_CURVE('',#490312,#490314,#490316,.T.); +#490312 = VERTEX_POINT('',#490313); +#490313 = CARTESIAN_POINT('',(154.7,-91.925,1.56)); +#490314 = VERTEX_POINT('',#490315); +#490315 = CARTESIAN_POINT('',(154.475,-91.7,1.56)); +#490316 = CIRCLE('',#490317,0.225000087974); +#490317 = AXIS2_PLACEMENT_3D('',#490318,#490319,#490320); +#490318 = CARTESIAN_POINT('',(154.47499991202,-91.92500008797,1.56)); +#490319 = DIRECTION('',(0.,0.,1.)); +#490320 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#490321 = ORIENTED_EDGE('',*,*,#490322,.T.); +#490322 = EDGE_CURVE('',#490314,#490323,#490325,.T.); +#490323 = VERTEX_POINT('',#490324); +#490324 = CARTESIAN_POINT('',(154.025,-91.7,1.56)); +#490325 = LINE('',#490326,#490327); +#490326 = CARTESIAN_POINT('',(154.475,-91.7,1.56)); +#490327 = VECTOR('',#490328,1.); +#490328 = DIRECTION('',(-1.,0.,0.)); +#490329 = ORIENTED_EDGE('',*,*,#490330,.T.); +#490330 = EDGE_CURVE('',#490323,#490331,#490333,.T.); +#490331 = VERTEX_POINT('',#490332); +#490332 = CARTESIAN_POINT('',(153.8,-91.925,1.56)); +#490333 = CIRCLE('',#490334,0.225000087974); +#490334 = AXIS2_PLACEMENT_3D('',#490335,#490336,#490337); +#490335 = CARTESIAN_POINT('',(154.02500008797,-91.92500008797,1.56)); +#490336 = DIRECTION('',(0.,0.,1.)); +#490337 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#490338 = ORIENTED_EDGE('',*,*,#490339,.T.); +#490339 = EDGE_CURVE('',#490331,#490340,#490342,.T.); +#490340 = VERTEX_POINT('',#490341); +#490341 = CARTESIAN_POINT('',(153.8,-92.775,1.56)); +#490342 = LINE('',#490343,#490344); +#490343 = CARTESIAN_POINT('',(153.8,-91.925,1.56)); +#490344 = VECTOR('',#490345,1.); +#490345 = DIRECTION('',(0.,-1.,0.)); +#490346 = ORIENTED_EDGE('',*,*,#490347,.T.); +#490347 = EDGE_CURVE('',#490340,#490348,#490350,.T.); +#490348 = VERTEX_POINT('',#490349); +#490349 = CARTESIAN_POINT('',(154.025,-93.,1.56)); +#490350 = CIRCLE('',#490351,0.225000087974); +#490351 = AXIS2_PLACEMENT_3D('',#490352,#490353,#490354); +#490352 = CARTESIAN_POINT('',(154.02500008797,-92.77499991202,1.56)); +#490353 = DIRECTION('',(0.,0.,1.)); +#490354 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#490355 = ORIENTED_EDGE('',*,*,#490356,.T.); +#490356 = EDGE_CURVE('',#490348,#490357,#490359,.T.); +#490357 = VERTEX_POINT('',#490358); +#490358 = CARTESIAN_POINT('',(154.475,-93.,1.56)); +#490359 = LINE('',#490360,#490361); +#490360 = CARTESIAN_POINT('',(154.025,-93.,1.56)); +#490361 = VECTOR('',#490362,1.); +#490362 = DIRECTION('',(1.,0.,0.)); +#490363 = ORIENTED_EDGE('',*,*,#490364,.T.); +#490364 = EDGE_CURVE('',#490357,#490365,#490367,.T.); +#490365 = VERTEX_POINT('',#490366); +#490366 = CARTESIAN_POINT('',(154.7,-92.775,1.56)); +#490367 = CIRCLE('',#490368,0.225000087974); +#490368 = AXIS2_PLACEMENT_3D('',#490369,#490370,#490371); +#490369 = CARTESIAN_POINT('',(154.47499991202,-92.77499991202,1.56)); +#490370 = DIRECTION('',(0.,0.,1.)); +#490371 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#490372 = ORIENTED_EDGE('',*,*,#490373,.T.); +#490373 = EDGE_CURVE('',#490365,#490312,#490374,.T.); +#490374 = LINE('',#490375,#490376); +#490375 = CARTESIAN_POINT('',(154.7,-92.775,1.56)); +#490376 = VECTOR('',#490377,1.); +#490377 = DIRECTION('',(0.,1.,0.)); +#490378 = FACE_BOUND('',#490379,.F.); +#490379 = EDGE_LOOP('',(#490380,#490391,#490399,#490408,#490416,#490425, + #490433,#490442)); +#490380 = ORIENTED_EDGE('',*,*,#490381,.T.); +#490381 = EDGE_CURVE('',#490382,#490384,#490386,.T.); +#490382 = VERTEX_POINT('',#490383); +#490383 = CARTESIAN_POINT('',(148.81,-92.38,1.56)); +#490384 = VERTEX_POINT('',#490385); +#490385 = CARTESIAN_POINT('',(148.67,-92.24,1.56)); +#490386 = CIRCLE('',#490387,0.139999827125); +#490387 = AXIS2_PLACEMENT_3D('',#490388,#490389,#490390); +#490388 = CARTESIAN_POINT('',(148.67000017287,-92.37999982712,1.56)); +#490389 = DIRECTION('',(0.,0.,1.)); +#490390 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#490391 = ORIENTED_EDGE('',*,*,#490392,.T.); +#490392 = EDGE_CURVE('',#490384,#490393,#490395,.T.); +#490393 = VERTEX_POINT('',#490394); +#490394 = CARTESIAN_POINT('',(148.33,-92.24,1.56)); +#490395 = LINE('',#490396,#490397); +#490396 = CARTESIAN_POINT('',(148.67,-92.24,1.56)); +#490397 = VECTOR('',#490398,1.); +#490398 = DIRECTION('',(-1.,0.,0.)); +#490399 = ORIENTED_EDGE('',*,*,#490400,.T.); +#490400 = EDGE_CURVE('',#490393,#490401,#490403,.T.); +#490401 = VERTEX_POINT('',#490402); +#490402 = CARTESIAN_POINT('',(148.19,-92.38,1.56)); +#490403 = CIRCLE('',#490404,0.139999827125); +#490404 = AXIS2_PLACEMENT_3D('',#490405,#490406,#490407); +#490405 = CARTESIAN_POINT('',(148.32999982712,-92.37999982712,1.56)); +#490406 = DIRECTION('',(0.,0.,1.)); +#490407 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#490408 = ORIENTED_EDGE('',*,*,#490409,.T.); +#490409 = EDGE_CURVE('',#490401,#490410,#490412,.T.); +#490410 = VERTEX_POINT('',#490411); +#490411 = CARTESIAN_POINT('',(148.19,-92.66,1.56)); +#490412 = LINE('',#490413,#490414); +#490413 = CARTESIAN_POINT('',(148.19,-92.38,1.56)); +#490414 = VECTOR('',#490415,1.); +#490415 = DIRECTION('',(0.,-1.,0.)); +#490416 = ORIENTED_EDGE('',*,*,#490417,.T.); +#490417 = EDGE_CURVE('',#490410,#490418,#490420,.T.); +#490418 = VERTEX_POINT('',#490419); +#490419 = CARTESIAN_POINT('',(148.33,-92.8,1.56)); +#490420 = CIRCLE('',#490421,0.139999827125); +#490421 = AXIS2_PLACEMENT_3D('',#490422,#490423,#490424); +#490422 = CARTESIAN_POINT('',(148.32999982712,-92.66000017287,1.56)); +#490423 = DIRECTION('',(0.,0.,1.)); +#490424 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#490425 = ORIENTED_EDGE('',*,*,#490426,.T.); +#490426 = EDGE_CURVE('',#490418,#490427,#490429,.T.); +#490427 = VERTEX_POINT('',#490428); +#490428 = CARTESIAN_POINT('',(148.67,-92.8,1.56)); +#490429 = LINE('',#490430,#490431); +#490430 = CARTESIAN_POINT('',(148.33,-92.8,1.56)); +#490431 = VECTOR('',#490432,1.); +#490432 = DIRECTION('',(1.,0.,0.)); +#490433 = ORIENTED_EDGE('',*,*,#490434,.T.); +#490434 = EDGE_CURVE('',#490427,#490435,#490437,.T.); +#490435 = VERTEX_POINT('',#490436); +#490436 = CARTESIAN_POINT('',(148.81,-92.66,1.56)); +#490437 = CIRCLE('',#490438,0.139999827125); +#490438 = AXIS2_PLACEMENT_3D('',#490439,#490440,#490441); +#490439 = CARTESIAN_POINT('',(148.67000017287,-92.66000017287,1.56)); +#490440 = DIRECTION('',(0.,0.,1.)); +#490441 = DIRECTION('',(-1.234820451253E-06,-0.999999999999,0.)); +#490442 = ORIENTED_EDGE('',*,*,#490443,.T.); +#490443 = EDGE_CURVE('',#490435,#490382,#490444,.T.); +#490444 = LINE('',#490445,#490446); +#490445 = CARTESIAN_POINT('',(148.81,-92.66,1.56)); +#490446 = VECTOR('',#490447,1.); +#490447 = DIRECTION('',(0.,1.,0.)); +#490448 = FACE_BOUND('',#490449,.F.); +#490449 = EDGE_LOOP('',(#490450,#490461,#490469,#490478,#490486,#490495, + #490503,#490512)); +#490450 = ORIENTED_EDGE('',*,*,#490451,.T.); +#490451 = EDGE_CURVE('',#490452,#490454,#490456,.T.); +#490452 = VERTEX_POINT('',#490453); +#490453 = CARTESIAN_POINT('',(123.55,-91.5375,1.56)); +#490454 = VERTEX_POINT('',#490455); +#490455 = CARTESIAN_POINT('',(123.3625,-91.35,1.56)); +#490456 = CIRCLE('',#490457,0.187498366229); +#490457 = AXIS2_PLACEMENT_3D('',#490458,#490459,#490460); +#490458 = CARTESIAN_POINT('',(123.36250163377,-91.53749836622,1.56)); +#490459 = DIRECTION('',(0.,0.,1.)); +#490460 = DIRECTION('',(0.999999999962,-8.713558430711E-06,0.)); +#490461 = ORIENTED_EDGE('',*,*,#490462,.T.); +#490462 = EDGE_CURVE('',#490454,#490463,#490465,.T.); +#490463 = VERTEX_POINT('',#490464); +#490464 = CARTESIAN_POINT('',(121.9375,-91.35,1.56)); +#490465 = LINE('',#490466,#490467); +#490466 = CARTESIAN_POINT('',(123.3625,-91.35,1.56)); +#490467 = VECTOR('',#490468,1.); +#490468 = DIRECTION('',(-1.,0.,0.)); +#490469 = ORIENTED_EDGE('',*,*,#490470,.T.); +#490470 = EDGE_CURVE('',#490463,#490471,#490473,.T.); +#490471 = VERTEX_POINT('',#490472); +#490472 = CARTESIAN_POINT('',(121.75,-91.5375,1.56)); +#490473 = CIRCLE('',#490474,0.187498366229); +#490474 = AXIS2_PLACEMENT_3D('',#490475,#490476,#490477); +#490475 = CARTESIAN_POINT('',(121.93749836622,-91.53749836622,1.56)); +#490476 = DIRECTION('',(0.,0.,1.)); +#490477 = DIRECTION('',(8.713558430711E-06,0.999999999962,-0.)); +#490478 = ORIENTED_EDGE('',*,*,#490479,.T.); +#490479 = EDGE_CURVE('',#490471,#490480,#490482,.T.); +#490480 = VERTEX_POINT('',#490481); +#490481 = CARTESIAN_POINT('',(121.75,-91.9125,1.56)); +#490482 = LINE('',#490483,#490484); +#490483 = CARTESIAN_POINT('',(121.75,-91.5375,1.56)); +#490484 = VECTOR('',#490485,1.); +#490485 = DIRECTION('',(0.,-1.,0.)); +#490486 = ORIENTED_EDGE('',*,*,#490487,.T.); +#490487 = EDGE_CURVE('',#490480,#490488,#490490,.T.); +#490488 = VERTEX_POINT('',#490489); +#490489 = CARTESIAN_POINT('',(121.9375,-92.1,1.56)); +#490490 = CIRCLE('',#490491,0.187498366229); +#490491 = AXIS2_PLACEMENT_3D('',#490492,#490493,#490494); +#490492 = CARTESIAN_POINT('',(121.93749836622,-91.91250163377,1.56)); +#490493 = DIRECTION('',(0.,0.,1.)); +#490494 = DIRECTION('',(-0.999999999962,8.713558506504E-06,0.)); +#490495 = ORIENTED_EDGE('',*,*,#490496,.T.); +#490496 = EDGE_CURVE('',#490488,#490497,#490499,.T.); +#490497 = VERTEX_POINT('',#490498); +#490498 = CARTESIAN_POINT('',(123.3625,-92.1,1.56)); +#490499 = LINE('',#490500,#490501); +#490500 = CARTESIAN_POINT('',(121.9375,-92.1,1.56)); +#490501 = VECTOR('',#490502,1.); +#490502 = DIRECTION('',(1.,0.,0.)); +#490503 = ORIENTED_EDGE('',*,*,#490504,.T.); +#490504 = EDGE_CURVE('',#490497,#490505,#490507,.T.); +#490505 = VERTEX_POINT('',#490506); +#490506 = CARTESIAN_POINT('',(123.55,-91.9125,1.56)); +#490507 = CIRCLE('',#490508,0.187498366229); +#490508 = AXIS2_PLACEMENT_3D('',#490509,#490510,#490511); +#490509 = CARTESIAN_POINT('',(123.36250163377,-91.91250163377,1.56)); +#490510 = DIRECTION('',(0.,0.,1.)); +#490511 = DIRECTION('',(-8.713558506504E-06,-0.999999999962,0.)); +#490512 = ORIENTED_EDGE('',*,*,#490513,.T.); +#490513 = EDGE_CURVE('',#490505,#490452,#490514,.T.); +#490514 = LINE('',#490515,#490516); +#490515 = CARTESIAN_POINT('',(123.55,-91.9125,1.56)); +#490516 = VECTOR('',#490517,1.); +#490517 = DIRECTION('',(0.,1.,0.)); +#490518 = FACE_BOUND('',#490519,.F.); +#490519 = EDGE_LOOP('',(#490520,#490531,#490539,#490548,#490556,#490565, + #490573,#490582)); +#490520 = ORIENTED_EDGE('',*,*,#490521,.T.); +#490521 = EDGE_CURVE('',#490522,#490524,#490526,.T.); +#490522 = VERTEX_POINT('',#490523); +#490523 = CARTESIAN_POINT('',(153.2,-91.5375,1.56)); +#490524 = VERTEX_POINT('',#490525); +#490525 = CARTESIAN_POINT('',(153.0125,-91.35,1.56)); +#490526 = CIRCLE('',#490527,0.187498366229); +#490527 = AXIS2_PLACEMENT_3D('',#490528,#490529,#490530); +#490528 = CARTESIAN_POINT('',(153.01250163377,-91.53749836622,1.56)); +#490529 = DIRECTION('',(0.,0.,1.)); +#490530 = DIRECTION('',(0.999999999962,-8.713558582296E-06,0.)); +#490531 = ORIENTED_EDGE('',*,*,#490532,.T.); +#490532 = EDGE_CURVE('',#490524,#490533,#490535,.T.); +#490533 = VERTEX_POINT('',#490534); +#490534 = CARTESIAN_POINT('',(151.5875,-91.35,1.56)); +#490535 = LINE('',#490536,#490537); +#490536 = CARTESIAN_POINT('',(153.0125,-91.35,1.56)); +#490537 = VECTOR('',#490538,1.); +#490538 = DIRECTION('',(-1.,0.,0.)); +#490539 = ORIENTED_EDGE('',*,*,#490540,.T.); +#490540 = EDGE_CURVE('',#490533,#490541,#490543,.T.); +#490541 = VERTEX_POINT('',#490542); +#490542 = CARTESIAN_POINT('',(151.4,-91.5375,1.56)); +#490543 = CIRCLE('',#490544,0.187498366229); +#490544 = AXIS2_PLACEMENT_3D('',#490545,#490546,#490547); +#490545 = CARTESIAN_POINT('',(151.58749836622,-91.53749836622,1.56)); +#490546 = DIRECTION('',(0.,0.,1.)); +#490547 = DIRECTION('',(8.713558582296E-06,0.999999999962,-0.)); +#490548 = ORIENTED_EDGE('',*,*,#490549,.T.); +#490549 = EDGE_CURVE('',#490541,#490550,#490552,.T.); +#490550 = VERTEX_POINT('',#490551); +#490551 = CARTESIAN_POINT('',(151.4,-91.9125,1.56)); +#490552 = LINE('',#490553,#490554); +#490553 = CARTESIAN_POINT('',(151.4,-91.5375,1.56)); +#490554 = VECTOR('',#490555,1.); +#490555 = DIRECTION('',(0.,-1.,0.)); +#490556 = ORIENTED_EDGE('',*,*,#490557,.T.); +#490557 = EDGE_CURVE('',#490550,#490558,#490560,.T.); +#490558 = VERTEX_POINT('',#490559); +#490559 = CARTESIAN_POINT('',(151.5875,-92.1,1.56)); +#490560 = CIRCLE('',#490561,0.187498366229); +#490561 = AXIS2_PLACEMENT_3D('',#490562,#490563,#490564); +#490562 = CARTESIAN_POINT('',(151.58749836622,-91.91250163377,1.56)); +#490563 = DIRECTION('',(0.,0.,1.)); +#490564 = DIRECTION('',(-0.999999999962,8.713558658088E-06,0.)); +#490565 = ORIENTED_EDGE('',*,*,#490566,.T.); +#490566 = EDGE_CURVE('',#490558,#490567,#490569,.T.); +#490567 = VERTEX_POINT('',#490568); +#490568 = CARTESIAN_POINT('',(153.0125,-92.1,1.56)); +#490569 = LINE('',#490570,#490571); +#490570 = CARTESIAN_POINT('',(151.5875,-92.1,1.56)); +#490571 = VECTOR('',#490572,1.); +#490572 = DIRECTION('',(1.,0.,0.)); +#490573 = ORIENTED_EDGE('',*,*,#490574,.T.); +#490574 = EDGE_CURVE('',#490567,#490575,#490577,.T.); +#490575 = VERTEX_POINT('',#490576); +#490576 = CARTESIAN_POINT('',(153.2,-91.9125,1.56)); +#490577 = CIRCLE('',#490578,0.187498366229); +#490578 = AXIS2_PLACEMENT_3D('',#490579,#490580,#490581); +#490579 = CARTESIAN_POINT('',(153.01250163377,-91.91250163377,1.56)); +#490580 = DIRECTION('',(0.,0.,1.)); +#490581 = DIRECTION('',(-8.713558582297E-06,-0.999999999962,0.)); +#490582 = ORIENTED_EDGE('',*,*,#490583,.T.); +#490583 = EDGE_CURVE('',#490575,#490522,#490584,.T.); +#490584 = LINE('',#490585,#490586); +#490585 = CARTESIAN_POINT('',(153.2,-91.9125,1.56)); +#490586 = VECTOR('',#490587,1.); +#490587 = DIRECTION('',(0.,1.,0.)); +#490588 = FACE_BOUND('',#490589,.F.); +#490589 = EDGE_LOOP('',(#490590)); +#490590 = ORIENTED_EDGE('',*,*,#490591,.T.); +#490591 = EDGE_CURVE('',#490592,#490592,#490594,.T.); +#490592 = VERTEX_POINT('',#490593); +#490593 = CARTESIAN_POINT('',(132.55,-90.25,1.56)); +#490594 = CIRCLE('',#490595,1.375); +#490595 = AXIS2_PLACEMENT_3D('',#490596,#490597,#490598); +#490596 = CARTESIAN_POINT('',(131.175,-90.25,1.56)); +#490597 = DIRECTION('',(0.,0.,1.)); +#490598 = DIRECTION('',(1.,0.,-0.)); +#490599 = FACE_BOUND('',#490600,.F.); +#490600 = EDGE_LOOP('',(#490601)); +#490601 = ORIENTED_EDGE('',*,*,#490602,.T.); +#490602 = EDGE_CURVE('',#490603,#490603,#490605,.T.); +#490603 = VERTEX_POINT('',#490604); +#490604 = CARTESIAN_POINT('',(145.2,-90.25,1.56)); +#490605 = CIRCLE('',#490606,1.375); +#490606 = AXIS2_PLACEMENT_3D('',#490607,#490608,#490609); +#490607 = CARTESIAN_POINT('',(143.825,-90.25,1.56)); +#490608 = DIRECTION('',(0.,0.,1.)); +#490609 = DIRECTION('',(1.,0.,-0.)); +#490610 = FACE_BOUND('',#490611,.F.); +#490611 = EDGE_LOOP('',(#490612,#490623,#490631,#490640,#490648,#490657, + #490665,#490674)); +#490612 = ORIENTED_EDGE('',*,*,#490613,.T.); +#490613 = EDGE_CURVE('',#490614,#490616,#490618,.T.); +#490614 = VERTEX_POINT('',#490615); +#490615 = CARTESIAN_POINT('',(123.55,-90.35,1.56)); +#490616 = VERTEX_POINT('',#490617); +#490617 = CARTESIAN_POINT('',(123.4,-90.2,1.56)); +#490618 = CIRCLE('',#490619,0.150000058649); +#490619 = AXIS2_PLACEMENT_3D('',#490620,#490621,#490622); +#490620 = CARTESIAN_POINT('',(123.39999994135,-90.35000005864,1.56)); +#490621 = DIRECTION('',(0.,0.,1.)); +#490622 = DIRECTION('',(1.,3.90995219498E-07,-0.)); +#490623 = ORIENTED_EDGE('',*,*,#490624,.T.); +#490624 = EDGE_CURVE('',#490616,#490625,#490627,.T.); +#490625 = VERTEX_POINT('',#490626); +#490626 = CARTESIAN_POINT('',(121.9,-90.2,1.56)); +#490627 = LINE('',#490628,#490629); +#490628 = CARTESIAN_POINT('',(123.4,-90.2,1.56)); +#490629 = VECTOR('',#490630,1.); +#490630 = DIRECTION('',(-1.,0.,0.)); +#490631 = ORIENTED_EDGE('',*,*,#490632,.T.); +#490632 = EDGE_CURVE('',#490625,#490633,#490635,.T.); +#490633 = VERTEX_POINT('',#490634); +#490634 = CARTESIAN_POINT('',(121.75,-90.35,1.56)); +#490635 = CIRCLE('',#490636,0.150000058649); +#490636 = AXIS2_PLACEMENT_3D('',#490637,#490638,#490639); +#490637 = CARTESIAN_POINT('',(121.90000005864,-90.35000005864,1.56)); +#490638 = DIRECTION('',(0.,0.,1.)); +#490639 = DIRECTION('',(-3.90995219498E-07,1.,0.)); +#490640 = ORIENTED_EDGE('',*,*,#490641,.T.); +#490641 = EDGE_CURVE('',#490633,#490642,#490644,.T.); +#490642 = VERTEX_POINT('',#490643); +#490643 = CARTESIAN_POINT('',(121.75,-90.65,1.56)); +#490644 = LINE('',#490645,#490646); +#490645 = CARTESIAN_POINT('',(121.75,-90.35,1.56)); +#490646 = VECTOR('',#490647,1.); +#490647 = DIRECTION('',(0.,-1.,0.)); +#490648 = ORIENTED_EDGE('',*,*,#490649,.T.); +#490649 = EDGE_CURVE('',#490642,#490650,#490652,.T.); +#490650 = VERTEX_POINT('',#490651); +#490651 = CARTESIAN_POINT('',(121.9,-90.8,1.56)); +#490652 = CIRCLE('',#490653,0.150000058649); +#490653 = AXIS2_PLACEMENT_3D('',#490654,#490655,#490656); +#490654 = CARTESIAN_POINT('',(121.90000005864,-90.64999994135,1.56)); +#490655 = DIRECTION('',(0.,0.,1.)); +#490656 = DIRECTION('',(-1.,-3.90995314237E-07,0.)); +#490657 = ORIENTED_EDGE('',*,*,#490658,.T.); +#490658 = EDGE_CURVE('',#490650,#490659,#490661,.T.); +#490659 = VERTEX_POINT('',#490660); +#490660 = CARTESIAN_POINT('',(123.4,-90.8,1.56)); +#490661 = LINE('',#490662,#490663); +#490662 = CARTESIAN_POINT('',(121.9,-90.8,1.56)); +#490663 = VECTOR('',#490664,1.); +#490664 = DIRECTION('',(1.,0.,0.)); +#490665 = ORIENTED_EDGE('',*,*,#490666,.T.); +#490666 = EDGE_CURVE('',#490659,#490667,#490669,.T.); +#490667 = VERTEX_POINT('',#490668); +#490668 = CARTESIAN_POINT('',(123.55,-90.65,1.56)); +#490669 = CIRCLE('',#490670,0.150000058649); +#490670 = AXIS2_PLACEMENT_3D('',#490671,#490672,#490673); +#490671 = CARTESIAN_POINT('',(123.39999994135,-90.64999994135,1.56)); +#490672 = DIRECTION('',(0.,0.,1.)); +#490673 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#490674 = ORIENTED_EDGE('',*,*,#490675,.T.); +#490675 = EDGE_CURVE('',#490667,#490614,#490676,.T.); +#490676 = LINE('',#490677,#490678); +#490677 = CARTESIAN_POINT('',(123.55,-90.65,1.56)); +#490678 = VECTOR('',#490679,1.); +#490679 = DIRECTION('',(0.,1.,0.)); +#490680 = FACE_BOUND('',#490681,.F.); +#490681 = EDGE_LOOP('',(#490682,#490693,#490701,#490710,#490718,#490727, + #490735,#490744)); +#490682 = ORIENTED_EDGE('',*,*,#490683,.T.); +#490683 = EDGE_CURVE('',#490684,#490686,#490688,.T.); +#490684 = VERTEX_POINT('',#490685); +#490685 = CARTESIAN_POINT('',(153.2,-90.35,1.56)); +#490686 = VERTEX_POINT('',#490687); +#490687 = CARTESIAN_POINT('',(153.05,-90.2,1.56)); +#490688 = CIRCLE('',#490689,0.150000058649); +#490689 = AXIS2_PLACEMENT_3D('',#490690,#490691,#490692); +#490690 = CARTESIAN_POINT('',(153.04999994135,-90.35000005864,1.56)); +#490691 = DIRECTION('',(0.,0.,1.)); +#490692 = DIRECTION('',(1.,3.909951247591E-07,-0.)); +#490693 = ORIENTED_EDGE('',*,*,#490694,.T.); +#490694 = EDGE_CURVE('',#490686,#490695,#490697,.T.); +#490695 = VERTEX_POINT('',#490696); +#490696 = CARTESIAN_POINT('',(151.55,-90.2,1.56)); +#490697 = LINE('',#490698,#490699); +#490698 = CARTESIAN_POINT('',(153.05,-90.2,1.56)); +#490699 = VECTOR('',#490700,1.); +#490700 = DIRECTION('',(-1.,0.,0.)); +#490701 = ORIENTED_EDGE('',*,*,#490702,.T.); +#490702 = EDGE_CURVE('',#490695,#490703,#490705,.T.); +#490703 = VERTEX_POINT('',#490704); +#490704 = CARTESIAN_POINT('',(151.4,-90.35,1.56)); +#490705 = CIRCLE('',#490706,0.150000058649); +#490706 = AXIS2_PLACEMENT_3D('',#490707,#490708,#490709); +#490707 = CARTESIAN_POINT('',(151.55000005864,-90.35000005864,1.56)); +#490708 = DIRECTION('',(0.,0.,1.)); +#490709 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#490710 = ORIENTED_EDGE('',*,*,#490711,.T.); +#490711 = EDGE_CURVE('',#490703,#490712,#490714,.T.); +#490712 = VERTEX_POINT('',#490713); +#490713 = CARTESIAN_POINT('',(151.4,-90.65,1.56)); +#490714 = LINE('',#490715,#490716); +#490715 = CARTESIAN_POINT('',(151.4,-90.35,1.56)); +#490716 = VECTOR('',#490717,1.); +#490717 = DIRECTION('',(0.,-1.,0.)); +#490718 = ORIENTED_EDGE('',*,*,#490719,.T.); +#490719 = EDGE_CURVE('',#490712,#490720,#490722,.T.); +#490720 = VERTEX_POINT('',#490721); +#490721 = CARTESIAN_POINT('',(151.55,-90.8,1.56)); +#490722 = CIRCLE('',#490723,0.150000058649); +#490723 = AXIS2_PLACEMENT_3D('',#490724,#490725,#490726); +#490724 = CARTESIAN_POINT('',(151.55000005864,-90.64999994135,1.56)); +#490725 = DIRECTION('',(0.,0.,1.)); +#490726 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#490727 = ORIENTED_EDGE('',*,*,#490728,.T.); +#490728 = EDGE_CURVE('',#490720,#490729,#490731,.T.); +#490729 = VERTEX_POINT('',#490730); +#490730 = CARTESIAN_POINT('',(153.05,-90.8,1.56)); +#490731 = LINE('',#490732,#490733); +#490732 = CARTESIAN_POINT('',(151.55,-90.8,1.56)); +#490733 = VECTOR('',#490734,1.); +#490734 = DIRECTION('',(1.,0.,0.)); +#490735 = ORIENTED_EDGE('',*,*,#490736,.T.); +#490736 = EDGE_CURVE('',#490729,#490737,#490739,.T.); +#490737 = VERTEX_POINT('',#490738); +#490738 = CARTESIAN_POINT('',(153.2,-90.65,1.56)); +#490739 = CIRCLE('',#490740,0.150000058649); +#490740 = AXIS2_PLACEMENT_3D('',#490741,#490742,#490743); +#490741 = CARTESIAN_POINT('',(153.04999994135,-90.64999994135,1.56)); +#490742 = DIRECTION('',(0.,0.,1.)); +#490743 = DIRECTION('',(3.909952194981E-07,-1.,0.)); +#490744 = ORIENTED_EDGE('',*,*,#490745,.T.); +#490745 = EDGE_CURVE('',#490737,#490684,#490746,.T.); +#490746 = LINE('',#490747,#490748); +#490747 = CARTESIAN_POINT('',(153.2,-90.65,1.56)); +#490748 = VECTOR('',#490749,1.); +#490749 = DIRECTION('',(0.,1.,0.)); +#490750 = FACE_BOUND('',#490751,.F.); +#490751 = EDGE_LOOP('',(#490752,#490763,#490771,#490780,#490788,#490797, + #490805,#490814)); +#490752 = ORIENTED_EDGE('',*,*,#490753,.T.); +#490753 = EDGE_CURVE('',#490754,#490756,#490758,.T.); +#490754 = VERTEX_POINT('',#490755); +#490755 = CARTESIAN_POINT('',(123.55,-89.0875,1.56)); +#490756 = VERTEX_POINT('',#490757); +#490757 = CARTESIAN_POINT('',(123.3625,-88.9,1.56)); +#490758 = CIRCLE('',#490759,0.187498366229); +#490759 = AXIS2_PLACEMENT_3D('',#490760,#490761,#490762); +#490760 = CARTESIAN_POINT('',(123.36250163377,-89.08749836622,1.56)); +#490761 = DIRECTION('',(0.,0.,1.)); +#490762 = DIRECTION('',(0.999999999962,-8.713558506504E-06,0.)); +#490763 = ORIENTED_EDGE('',*,*,#490764,.T.); +#490764 = EDGE_CURVE('',#490756,#490765,#490767,.T.); +#490765 = VERTEX_POINT('',#490766); +#490766 = CARTESIAN_POINT('',(121.9375,-88.9,1.56)); +#490767 = LINE('',#490768,#490769); +#490768 = CARTESIAN_POINT('',(123.3625,-88.9,1.56)); +#490769 = VECTOR('',#490770,1.); +#490770 = DIRECTION('',(-1.,0.,0.)); +#490771 = ORIENTED_EDGE('',*,*,#490772,.T.); +#490772 = EDGE_CURVE('',#490765,#490773,#490775,.T.); +#490773 = VERTEX_POINT('',#490774); +#490774 = CARTESIAN_POINT('',(121.75,-89.0875,1.56)); +#490775 = CIRCLE('',#490776,0.187498366229); +#490776 = AXIS2_PLACEMENT_3D('',#490777,#490778,#490779); +#490777 = CARTESIAN_POINT('',(121.93749836622,-89.08749836622,1.56)); +#490778 = DIRECTION('',(0.,0.,1.)); +#490779 = DIRECTION('',(8.713558582296E-06,0.999999999962,-0.)); +#490780 = ORIENTED_EDGE('',*,*,#490781,.T.); +#490781 = EDGE_CURVE('',#490773,#490782,#490784,.T.); +#490782 = VERTEX_POINT('',#490783); +#490783 = CARTESIAN_POINT('',(121.75,-89.4625,1.56)); +#490784 = LINE('',#490785,#490786); +#490785 = CARTESIAN_POINT('',(121.75,-89.0875,1.56)); +#490786 = VECTOR('',#490787,1.); +#490787 = DIRECTION('',(0.,-1.,0.)); +#490788 = ORIENTED_EDGE('',*,*,#490789,.T.); +#490789 = EDGE_CURVE('',#490782,#490790,#490792,.T.); +#490790 = VERTEX_POINT('',#490791); +#490791 = CARTESIAN_POINT('',(121.9375,-89.65,1.56)); +#490792 = CIRCLE('',#490793,0.187498366229); +#490793 = AXIS2_PLACEMENT_3D('',#490794,#490795,#490796); +#490794 = CARTESIAN_POINT('',(121.93749836622,-89.46250163377,1.56)); +#490795 = DIRECTION('',(0.,0.,1.)); +#490796 = DIRECTION('',(-0.999999999962,8.713558430711E-06,0.)); +#490797 = ORIENTED_EDGE('',*,*,#490798,.T.); +#490798 = EDGE_CURVE('',#490790,#490799,#490801,.T.); +#490799 = VERTEX_POINT('',#490800); +#490800 = CARTESIAN_POINT('',(123.3625,-89.65,1.56)); +#490801 = LINE('',#490802,#490803); +#490802 = CARTESIAN_POINT('',(121.9375,-89.65,1.56)); +#490803 = VECTOR('',#490804,1.); +#490804 = DIRECTION('',(1.,0.,0.)); +#490805 = ORIENTED_EDGE('',*,*,#490806,.T.); +#490806 = EDGE_CURVE('',#490799,#490807,#490809,.T.); +#490807 = VERTEX_POINT('',#490808); +#490808 = CARTESIAN_POINT('',(123.55,-89.4625,1.56)); +#490809 = CIRCLE('',#490810,0.187498366229); +#490810 = AXIS2_PLACEMENT_3D('',#490811,#490812,#490813); +#490811 = CARTESIAN_POINT('',(123.36250163377,-89.46250163377,1.56)); +#490812 = DIRECTION('',(0.,0.,1.)); +#490813 = DIRECTION('',(-8.713558354919E-06,-0.999999999962,0.)); +#490814 = ORIENTED_EDGE('',*,*,#490815,.T.); +#490815 = EDGE_CURVE('',#490807,#490754,#490816,.T.); +#490816 = LINE('',#490817,#490818); +#490817 = CARTESIAN_POINT('',(123.55,-89.4625,1.56)); +#490818 = VECTOR('',#490819,1.); +#490819 = DIRECTION('',(0.,1.,0.)); +#490820 = FACE_BOUND('',#490821,.F.); +#490821 = EDGE_LOOP('',(#490822,#490833,#490841,#490850,#490858,#490867, + #490875,#490884)); +#490822 = ORIENTED_EDGE('',*,*,#490823,.T.); +#490823 = EDGE_CURVE('',#490824,#490826,#490828,.T.); +#490824 = VERTEX_POINT('',#490825); +#490825 = CARTESIAN_POINT('',(153.2,-89.0875,1.56)); +#490826 = VERTEX_POINT('',#490827); +#490827 = CARTESIAN_POINT('',(153.0125,-88.9,1.56)); +#490828 = CIRCLE('',#490829,0.187498366229); +#490829 = AXIS2_PLACEMENT_3D('',#490830,#490831,#490832); +#490830 = CARTESIAN_POINT('',(153.01250163377,-89.08749836622,1.56)); +#490831 = DIRECTION('',(0.,0.,1.)); +#490832 = DIRECTION('',(0.999999999962,-8.713558658088E-06,0.)); +#490833 = ORIENTED_EDGE('',*,*,#490834,.T.); +#490834 = EDGE_CURVE('',#490826,#490835,#490837,.T.); +#490835 = VERTEX_POINT('',#490836); +#490836 = CARTESIAN_POINT('',(151.5875,-88.9,1.56)); +#490837 = LINE('',#490838,#490839); +#490838 = CARTESIAN_POINT('',(153.0125,-88.9,1.56)); +#490839 = VECTOR('',#490840,1.); +#490840 = DIRECTION('',(-1.,0.,0.)); +#490841 = ORIENTED_EDGE('',*,*,#490842,.T.); +#490842 = EDGE_CURVE('',#490835,#490843,#490845,.T.); +#490843 = VERTEX_POINT('',#490844); +#490844 = CARTESIAN_POINT('',(151.4,-89.0875,1.56)); +#490845 = CIRCLE('',#490846,0.187498366229); +#490846 = AXIS2_PLACEMENT_3D('',#490847,#490848,#490849); +#490847 = CARTESIAN_POINT('',(151.58749836622,-89.08749836622,1.56)); +#490848 = DIRECTION('',(0.,0.,1.)); +#490849 = DIRECTION('',(8.713558582297E-06,0.999999999962,-0.)); +#490850 = ORIENTED_EDGE('',*,*,#490851,.T.); +#490851 = EDGE_CURVE('',#490843,#490852,#490854,.T.); +#490852 = VERTEX_POINT('',#490853); +#490853 = CARTESIAN_POINT('',(151.4,-89.4625,1.56)); +#490854 = LINE('',#490855,#490856); +#490855 = CARTESIAN_POINT('',(151.4,-89.0875,1.56)); +#490856 = VECTOR('',#490857,1.); +#490857 = DIRECTION('',(0.,-1.,0.)); +#490858 = ORIENTED_EDGE('',*,*,#490859,.T.); +#490859 = EDGE_CURVE('',#490852,#490860,#490862,.T.); +#490860 = VERTEX_POINT('',#490861); +#490861 = CARTESIAN_POINT('',(151.5875,-89.65,1.56)); +#490862 = CIRCLE('',#490863,0.187498366229); +#490863 = AXIS2_PLACEMENT_3D('',#490864,#490865,#490866); +#490864 = CARTESIAN_POINT('',(151.58749836622,-89.46250163377,1.56)); +#490865 = DIRECTION('',(0.,0.,1.)); +#490866 = DIRECTION('',(-0.999999999962,8.713558582296E-06,0.)); +#490867 = ORIENTED_EDGE('',*,*,#490868,.T.); +#490868 = EDGE_CURVE('',#490860,#490869,#490871,.T.); +#490869 = VERTEX_POINT('',#490870); +#490870 = CARTESIAN_POINT('',(153.0125,-89.65,1.56)); +#490871 = LINE('',#490872,#490873); +#490872 = CARTESIAN_POINT('',(151.5875,-89.65,1.56)); +#490873 = VECTOR('',#490874,1.); +#490874 = DIRECTION('',(1.,0.,0.)); +#490875 = ORIENTED_EDGE('',*,*,#490876,.T.); +#490876 = EDGE_CURVE('',#490869,#490877,#490879,.T.); +#490877 = VERTEX_POINT('',#490878); +#490878 = CARTESIAN_POINT('',(153.2,-89.4625,1.56)); +#490879 = CIRCLE('',#490880,0.187498366229); +#490880 = AXIS2_PLACEMENT_3D('',#490881,#490882,#490883); +#490881 = CARTESIAN_POINT('',(153.01250163377,-89.46250163377,1.56)); +#490882 = DIRECTION('',(0.,0.,1.)); +#490883 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#490884 = ORIENTED_EDGE('',*,*,#490885,.T.); +#490885 = EDGE_CURVE('',#490877,#490824,#490886,.T.); +#490886 = LINE('',#490887,#490888); +#490887 = CARTESIAN_POINT('',(153.2,-89.4625,1.56)); +#490888 = VECTOR('',#490889,1.); +#490889 = DIRECTION('',(0.,1.,0.)); +#490890 = FACE_BOUND('',#490891,.F.); +#490891 = EDGE_LOOP('',(#490892,#490903,#490911,#490920,#490928,#490937, + #490945,#490954)); +#490892 = ORIENTED_EDGE('',*,*,#490893,.T.); +#490893 = EDGE_CURVE('',#490894,#490896,#490898,.T.); +#490894 = VERTEX_POINT('',#490895); +#490895 = CARTESIAN_POINT('',(125.75,-88.915,1.56)); +#490896 = VERTEX_POINT('',#490897); +#490897 = CARTESIAN_POINT('',(125.615,-88.78,1.56)); +#490898 = CIRCLE('',#490899,0.135001418495); +#490899 = AXIS2_PLACEMENT_3D('',#490900,#490901,#490902); +#490900 = CARTESIAN_POINT('',(125.61499858151,-88.91500141848,1.56)); +#490901 = DIRECTION('',(0.,0.,1.)); +#490902 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#490903 = ORIENTED_EDGE('',*,*,#490904,.T.); +#490904 = EDGE_CURVE('',#490896,#490905,#490907,.T.); +#490905 = VERTEX_POINT('',#490906); +#490906 = CARTESIAN_POINT('',(125.345,-88.78,1.56)); +#490907 = LINE('',#490908,#490909); +#490908 = CARTESIAN_POINT('',(125.615,-88.78,1.56)); +#490909 = VECTOR('',#490910,1.); +#490910 = DIRECTION('',(-1.,0.,0.)); +#490911 = ORIENTED_EDGE('',*,*,#490912,.T.); +#490912 = EDGE_CURVE('',#490905,#490913,#490915,.T.); +#490913 = VERTEX_POINT('',#490914); +#490914 = CARTESIAN_POINT('',(125.21,-88.915,1.56)); +#490915 = CIRCLE('',#490916,0.135001418495); +#490916 = AXIS2_PLACEMENT_3D('',#490917,#490918,#490919); +#490917 = CARTESIAN_POINT('',(125.34500141848,-88.91500141848,1.56)); +#490918 = DIRECTION('',(0.,0.,1.)); +#490919 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#490920 = ORIENTED_EDGE('',*,*,#490921,.T.); +#490921 = EDGE_CURVE('',#490913,#490922,#490924,.T.); +#490922 = VERTEX_POINT('',#490923); +#490923 = CARTESIAN_POINT('',(125.21,-89.285,1.56)); +#490924 = LINE('',#490925,#490926); +#490925 = CARTESIAN_POINT('',(125.21,-88.915,1.56)); +#490926 = VECTOR('',#490927,1.); +#490927 = DIRECTION('',(0.,-1.,0.)); +#490928 = ORIENTED_EDGE('',*,*,#490929,.T.); +#490929 = EDGE_CURVE('',#490922,#490930,#490932,.T.); +#490930 = VERTEX_POINT('',#490931); +#490931 = CARTESIAN_POINT('',(125.345,-89.42,1.56)); +#490932 = CIRCLE('',#490933,0.135001418495); +#490933 = AXIS2_PLACEMENT_3D('',#490934,#490935,#490936); +#490934 = CARTESIAN_POINT('',(125.34500141848,-89.28499858151,1.56)); +#490935 = DIRECTION('',(0.,0.,1.)); +#490936 = DIRECTION('',(-0.999999999945,-1.050720641103E-05,0.)); +#490937 = ORIENTED_EDGE('',*,*,#490938,.T.); +#490938 = EDGE_CURVE('',#490930,#490939,#490941,.T.); +#490939 = VERTEX_POINT('',#490940); +#490940 = CARTESIAN_POINT('',(125.615,-89.42,1.56)); +#490941 = LINE('',#490942,#490943); +#490942 = CARTESIAN_POINT('',(125.345,-89.42,1.56)); +#490943 = VECTOR('',#490944,1.); +#490944 = DIRECTION('',(1.,0.,0.)); +#490945 = ORIENTED_EDGE('',*,*,#490946,.T.); +#490946 = EDGE_CURVE('',#490939,#490947,#490949,.T.); +#490947 = VERTEX_POINT('',#490948); +#490948 = CARTESIAN_POINT('',(125.75,-89.285,1.56)); +#490949 = CIRCLE('',#490950,0.135001418495); +#490950 = AXIS2_PLACEMENT_3D('',#490951,#490952,#490953); +#490951 = CARTESIAN_POINT('',(125.61499858151,-89.28499858151,1.56)); +#490952 = DIRECTION('',(0.,0.,1.)); +#490953 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#490954 = ORIENTED_EDGE('',*,*,#490955,.T.); +#490955 = EDGE_CURVE('',#490947,#490894,#490956,.T.); +#490956 = LINE('',#490957,#490958); +#490957 = CARTESIAN_POINT('',(125.75,-89.285,1.56)); +#490958 = VECTOR('',#490959,1.); +#490959 = DIRECTION('',(0.,1.,0.)); +#490960 = FACE_BOUND('',#490961,.F.); +#490961 = EDGE_LOOP('',(#490962,#490973,#490981,#490990,#490998,#491007, + #491015,#491024)); +#490962 = ORIENTED_EDGE('',*,*,#490963,.T.); +#490963 = EDGE_CURVE('',#490964,#490966,#490968,.T.); +#490964 = VERTEX_POINT('',#490965); +#490965 = CARTESIAN_POINT('',(126.77,-88.915,1.56)); +#490966 = VERTEX_POINT('',#490967); +#490967 = CARTESIAN_POINT('',(126.635,-88.78,1.56)); +#490968 = CIRCLE('',#490969,0.135001418495); +#490969 = AXIS2_PLACEMENT_3D('',#490970,#490971,#490972); +#490970 = CARTESIAN_POINT('',(126.63499858151,-88.91500141848,1.56)); +#490971 = DIRECTION('',(0.,0.,1.)); +#490972 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#490973 = ORIENTED_EDGE('',*,*,#490974,.T.); +#490974 = EDGE_CURVE('',#490966,#490975,#490977,.T.); +#490975 = VERTEX_POINT('',#490976); +#490976 = CARTESIAN_POINT('',(126.365,-88.78,1.56)); +#490977 = LINE('',#490978,#490979); +#490978 = CARTESIAN_POINT('',(126.635,-88.78,1.56)); +#490979 = VECTOR('',#490980,1.); +#490980 = DIRECTION('',(-1.,0.,0.)); +#490981 = ORIENTED_EDGE('',*,*,#490982,.T.); +#490982 = EDGE_CURVE('',#490975,#490983,#490985,.T.); +#490983 = VERTEX_POINT('',#490984); +#490984 = CARTESIAN_POINT('',(126.23,-88.915,1.56)); +#490985 = CIRCLE('',#490986,0.135001418495); +#490986 = AXIS2_PLACEMENT_3D('',#490987,#490988,#490989); +#490987 = CARTESIAN_POINT('',(126.36500141848,-88.91500141848,1.56)); +#490988 = DIRECTION('',(0.,0.,1.)); +#490989 = DIRECTION('',(-1.050720662156E-05,0.999999999945,0.)); +#490990 = ORIENTED_EDGE('',*,*,#490991,.T.); +#490991 = EDGE_CURVE('',#490983,#490992,#490994,.T.); +#490992 = VERTEX_POINT('',#490993); +#490993 = CARTESIAN_POINT('',(126.23,-89.285,1.56)); +#490994 = LINE('',#490995,#490996); +#490995 = CARTESIAN_POINT('',(126.23,-88.915,1.56)); +#490996 = VECTOR('',#490997,1.); +#490997 = DIRECTION('',(0.,-1.,0.)); +#490998 = ORIENTED_EDGE('',*,*,#490999,.T.); +#490999 = EDGE_CURVE('',#490992,#491000,#491002,.T.); +#491000 = VERTEX_POINT('',#491001); +#491001 = CARTESIAN_POINT('',(126.365,-89.42,1.56)); +#491002 = CIRCLE('',#491003,0.135001418495); +#491003 = AXIS2_PLACEMENT_3D('',#491004,#491005,#491006); +#491004 = CARTESIAN_POINT('',(126.36500141848,-89.28499858151,1.56)); +#491005 = DIRECTION('',(0.,0.,1.)); +#491006 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#491007 = ORIENTED_EDGE('',*,*,#491008,.T.); +#491008 = EDGE_CURVE('',#491000,#491009,#491011,.T.); +#491009 = VERTEX_POINT('',#491010); +#491010 = CARTESIAN_POINT('',(126.635,-89.42,1.56)); +#491011 = LINE('',#491012,#491013); +#491012 = CARTESIAN_POINT('',(126.365,-89.42,1.56)); +#491013 = VECTOR('',#491014,1.); +#491014 = DIRECTION('',(1.,0.,0.)); +#491015 = ORIENTED_EDGE('',*,*,#491016,.T.); +#491016 = EDGE_CURVE('',#491009,#491017,#491019,.T.); +#491017 = VERTEX_POINT('',#491018); +#491018 = CARTESIAN_POINT('',(126.77,-89.285,1.56)); +#491019 = CIRCLE('',#491020,0.135001418495); +#491020 = AXIS2_PLACEMENT_3D('',#491021,#491022,#491023); +#491021 = CARTESIAN_POINT('',(126.63499858151,-89.28499858151,1.56)); +#491022 = DIRECTION('',(0.,0.,1.)); +#491023 = DIRECTION('',(1.050720662156E-05,-0.999999999945,0.)); +#491024 = ORIENTED_EDGE('',*,*,#491025,.T.); +#491025 = EDGE_CURVE('',#491017,#490964,#491026,.T.); +#491026 = LINE('',#491027,#491028); +#491027 = CARTESIAN_POINT('',(126.77,-89.285,1.56)); +#491028 = VECTOR('',#491029,1.); +#491029 = DIRECTION('',(0.,1.,0.)); +#491030 = FACE_BOUND('',#491031,.F.); +#491031 = EDGE_LOOP('',(#491032,#491043,#491051,#491060,#491068,#491077, + #491085,#491094)); +#491032 = ORIENTED_EDGE('',*,*,#491033,.T.); +#491033 = EDGE_CURVE('',#491034,#491036,#491038,.T.); +#491034 = VERTEX_POINT('',#491035); +#491035 = CARTESIAN_POINT('',(121.15,-88.225,1.56)); +#491036 = VERTEX_POINT('',#491037); +#491037 = CARTESIAN_POINT('',(120.925,-88.,1.56)); +#491038 = CIRCLE('',#491039,0.225000087974); +#491039 = AXIS2_PLACEMENT_3D('',#491040,#491041,#491042); +#491040 = CARTESIAN_POINT('',(120.92499991202,-88.22500008797,1.56)); +#491041 = DIRECTION('',(0.,0.,1.)); +#491042 = DIRECTION('',(1.,3.909954721353E-07,-0.)); +#491043 = ORIENTED_EDGE('',*,*,#491044,.T.); +#491044 = EDGE_CURVE('',#491036,#491045,#491047,.T.); +#491045 = VERTEX_POINT('',#491046); +#491046 = CARTESIAN_POINT('',(120.475,-88.,1.56)); +#491047 = LINE('',#491048,#491049); +#491048 = CARTESIAN_POINT('',(120.925,-88.,1.56)); +#491049 = VECTOR('',#491050,1.); +#491050 = DIRECTION('',(-1.,0.,0.)); +#491051 = ORIENTED_EDGE('',*,*,#491052,.T.); +#491052 = EDGE_CURVE('',#491045,#491053,#491055,.T.); +#491053 = VERTEX_POINT('',#491054); +#491054 = CARTESIAN_POINT('',(120.25,-88.225,1.56)); +#491055 = CIRCLE('',#491056,0.225000087974); +#491056 = AXIS2_PLACEMENT_3D('',#491057,#491058,#491059); +#491057 = CARTESIAN_POINT('',(120.47500008797,-88.22500008797,1.56)); +#491058 = DIRECTION('',(0.,0.,1.)); +#491059 = DIRECTION('',(-3.909953458166E-07,1.,0.)); +#491060 = ORIENTED_EDGE('',*,*,#491061,.T.); +#491061 = EDGE_CURVE('',#491053,#491062,#491064,.T.); +#491062 = VERTEX_POINT('',#491063); +#491063 = CARTESIAN_POINT('',(120.25,-89.075,1.56)); +#491064 = LINE('',#491065,#491066); +#491065 = CARTESIAN_POINT('',(120.25,-88.225,1.56)); +#491066 = VECTOR('',#491067,1.); +#491067 = DIRECTION('',(0.,-1.,0.)); +#491068 = ORIENTED_EDGE('',*,*,#491069,.T.); +#491069 = EDGE_CURVE('',#491062,#491070,#491072,.T.); +#491070 = VERTEX_POINT('',#491071); +#491071 = CARTESIAN_POINT('',(120.475,-89.3,1.56)); +#491072 = CIRCLE('',#491073,0.225000087974); +#491073 = AXIS2_PLACEMENT_3D('',#491074,#491075,#491076); +#491074 = CARTESIAN_POINT('',(120.47500008797,-89.07499991202,1.56)); +#491075 = DIRECTION('',(0.,0.,1.)); +#491076 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#491077 = ORIENTED_EDGE('',*,*,#491078,.T.); +#491078 = EDGE_CURVE('',#491070,#491079,#491081,.T.); +#491079 = VERTEX_POINT('',#491080); +#491080 = CARTESIAN_POINT('',(120.925,-89.3,1.56)); +#491081 = LINE('',#491082,#491083); +#491082 = CARTESIAN_POINT('',(120.475,-89.3,1.56)); +#491083 = VECTOR('',#491084,1.); +#491084 = DIRECTION('',(1.,0.,0.)); +#491085 = ORIENTED_EDGE('',*,*,#491086,.T.); +#491086 = EDGE_CURVE('',#491079,#491087,#491089,.T.); +#491087 = VERTEX_POINT('',#491088); +#491088 = CARTESIAN_POINT('',(121.15,-89.075,1.56)); +#491089 = CIRCLE('',#491090,0.225000087974); +#491090 = AXIS2_PLACEMENT_3D('',#491091,#491092,#491093); +#491091 = CARTESIAN_POINT('',(120.92499991202,-89.07499991202,1.56)); +#491092 = DIRECTION('',(0.,0.,1.)); +#491093 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#491094 = ORIENTED_EDGE('',*,*,#491095,.T.); +#491095 = EDGE_CURVE('',#491087,#491034,#491096,.T.); +#491096 = LINE('',#491097,#491098); +#491097 = CARTESIAN_POINT('',(121.15,-89.075,1.56)); +#491098 = VECTOR('',#491099,1.); +#491099 = DIRECTION('',(0.,1.,0.)); +#491100 = FACE_BOUND('',#491101,.F.); +#491101 = EDGE_LOOP('',(#491102,#491113,#491121,#491130,#491138,#491147, + #491155,#491164)); +#491102 = ORIENTED_EDGE('',*,*,#491103,.T.); +#491103 = EDGE_CURVE('',#491104,#491106,#491108,.T.); +#491104 = VERTEX_POINT('',#491105); +#491105 = CARTESIAN_POINT('',(154.7,-88.225,1.56)); +#491106 = VERTEX_POINT('',#491107); +#491107 = CARTESIAN_POINT('',(154.475,-88.,1.56)); +#491108 = CIRCLE('',#491109,0.225000087974); +#491109 = AXIS2_PLACEMENT_3D('',#491110,#491111,#491112); +#491110 = CARTESIAN_POINT('',(154.47499991202,-88.22500008797,1.56)); +#491111 = DIRECTION('',(0.,0.,1.)); +#491112 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#491113 = ORIENTED_EDGE('',*,*,#491114,.T.); +#491114 = EDGE_CURVE('',#491106,#491115,#491117,.T.); +#491115 = VERTEX_POINT('',#491116); +#491116 = CARTESIAN_POINT('',(154.025,-88.,1.56)); +#491117 = LINE('',#491118,#491119); +#491118 = CARTESIAN_POINT('',(154.475,-88.,1.56)); +#491119 = VECTOR('',#491120,1.); +#491120 = DIRECTION('',(-1.,0.,0.)); +#491121 = ORIENTED_EDGE('',*,*,#491122,.T.); +#491122 = EDGE_CURVE('',#491115,#491123,#491125,.T.); +#491123 = VERTEX_POINT('',#491124); +#491124 = CARTESIAN_POINT('',(153.8,-88.225,1.56)); +#491125 = CIRCLE('',#491126,0.225000087974); +#491126 = AXIS2_PLACEMENT_3D('',#491127,#491128,#491129); +#491127 = CARTESIAN_POINT('',(154.02500008797,-88.22500008797,1.56)); +#491128 = DIRECTION('',(0.,0.,1.)); +#491129 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#491130 = ORIENTED_EDGE('',*,*,#491131,.T.); +#491131 = EDGE_CURVE('',#491123,#491132,#491134,.T.); +#491132 = VERTEX_POINT('',#491133); +#491133 = CARTESIAN_POINT('',(153.8,-89.075,1.56)); +#491134 = LINE('',#491135,#491136); +#491135 = CARTESIAN_POINT('',(153.8,-88.225,1.56)); +#491136 = VECTOR('',#491137,1.); +#491137 = DIRECTION('',(0.,-1.,0.)); +#491138 = ORIENTED_EDGE('',*,*,#491139,.T.); +#491139 = EDGE_CURVE('',#491132,#491140,#491142,.T.); +#491140 = VERTEX_POINT('',#491141); +#491141 = CARTESIAN_POINT('',(154.025,-89.3,1.56)); +#491142 = CIRCLE('',#491143,0.225000087974); +#491143 = AXIS2_PLACEMENT_3D('',#491144,#491145,#491146); +#491144 = CARTESIAN_POINT('',(154.02500008797,-89.07499991202,1.56)); +#491145 = DIRECTION('',(0.,0.,1.)); +#491146 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#491147 = ORIENTED_EDGE('',*,*,#491148,.T.); +#491148 = EDGE_CURVE('',#491140,#491149,#491151,.T.); +#491149 = VERTEX_POINT('',#491150); +#491150 = CARTESIAN_POINT('',(154.475,-89.3,1.56)); +#491151 = LINE('',#491152,#491153); +#491152 = CARTESIAN_POINT('',(154.025,-89.3,1.56)); +#491153 = VECTOR('',#491154,1.); +#491154 = DIRECTION('',(1.,0.,0.)); +#491155 = ORIENTED_EDGE('',*,*,#491156,.T.); +#491156 = EDGE_CURVE('',#491149,#491157,#491159,.T.); +#491157 = VERTEX_POINT('',#491158); +#491158 = CARTESIAN_POINT('',(154.7,-89.075,1.56)); +#491159 = CIRCLE('',#491160,0.225000087974); +#491160 = AXIS2_PLACEMENT_3D('',#491161,#491162,#491163); +#491161 = CARTESIAN_POINT('',(154.47499991202,-89.07499991202,1.56)); +#491162 = DIRECTION('',(0.,0.,1.)); +#491163 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#491164 = ORIENTED_EDGE('',*,*,#491165,.T.); +#491165 = EDGE_CURVE('',#491157,#491104,#491166,.T.); +#491166 = LINE('',#491167,#491168); +#491167 = CARTESIAN_POINT('',(154.7,-89.075,1.56)); +#491168 = VECTOR('',#491169,1.); +#491169 = DIRECTION('',(0.,1.,0.)); +#491170 = FACE_BOUND('',#491171,.F.); +#491171 = EDGE_LOOP('',(#491172)); +#491172 = ORIENTED_EDGE('',*,*,#491173,.T.); +#491173 = EDGE_CURVE('',#491174,#491174,#491176,.T.); +#491174 = VERTEX_POINT('',#491175); +#491175 = CARTESIAN_POINT('',(122.2,-88.375,1.56)); +#491176 = CIRCLE('',#491177,0.45); +#491177 = AXIS2_PLACEMENT_3D('',#491178,#491179,#491180); +#491178 = CARTESIAN_POINT('',(121.75,-88.375,1.56)); +#491179 = DIRECTION('',(0.,0.,1.)); +#491180 = DIRECTION('',(1.,0.,-0.)); +#491181 = FACE_BOUND('',#491182,.F.); +#491182 = EDGE_LOOP('',(#491183)); +#491183 = ORIENTED_EDGE('',*,*,#491184,.T.); +#491184 = EDGE_CURVE('',#491185,#491185,#491187,.T.); +#491185 = VERTEX_POINT('',#491186); +#491186 = CARTESIAN_POINT('',(153.65,-88.375,1.56)); +#491187 = CIRCLE('',#491188,0.45); +#491188 = AXIS2_PLACEMENT_3D('',#491189,#491190,#491191); +#491189 = CARTESIAN_POINT('',(153.2,-88.375,1.56)); +#491190 = DIRECTION('',(0.,0.,1.)); +#491191 = DIRECTION('',(1.,0.,-0.)); +#491192 = FACE_BOUND('',#491193,.F.); +#491193 = EDGE_LOOP('',(#491194,#491205,#491213,#491222,#491230,#491239, + #491247,#491256)); +#491194 = ORIENTED_EDGE('',*,*,#491195,.T.); +#491195 = EDGE_CURVE('',#491196,#491198,#491200,.T.); +#491196 = VERTEX_POINT('',#491197); +#491197 = CARTESIAN_POINT('',(125.75,-87.715,1.56)); +#491198 = VERTEX_POINT('',#491199); +#491199 = CARTESIAN_POINT('',(125.615,-87.58,1.56)); +#491200 = CIRCLE('',#491201,0.135001418495); +#491201 = AXIS2_PLACEMENT_3D('',#491202,#491203,#491204); +#491202 = CARTESIAN_POINT('',(125.61499858151,-87.71500141848,1.56)); +#491203 = DIRECTION('',(0.,0.,1.)); +#491204 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#491205 = ORIENTED_EDGE('',*,*,#491206,.T.); +#491206 = EDGE_CURVE('',#491198,#491207,#491209,.T.); +#491207 = VERTEX_POINT('',#491208); +#491208 = CARTESIAN_POINT('',(125.345,-87.58,1.56)); +#491209 = LINE('',#491210,#491211); +#491210 = CARTESIAN_POINT('',(125.615,-87.58,1.56)); +#491211 = VECTOR('',#491212,1.); +#491212 = DIRECTION('',(-1.,0.,0.)); +#491213 = ORIENTED_EDGE('',*,*,#491214,.T.); +#491214 = EDGE_CURVE('',#491207,#491215,#491217,.T.); +#491215 = VERTEX_POINT('',#491216); +#491216 = CARTESIAN_POINT('',(125.21,-87.715,1.56)); +#491217 = CIRCLE('',#491218,0.135001418495); +#491218 = AXIS2_PLACEMENT_3D('',#491219,#491220,#491221); +#491219 = CARTESIAN_POINT('',(125.34500141848,-87.71500141848,1.56)); +#491220 = DIRECTION('',(0.,0.,1.)); +#491221 = DIRECTION('',(-1.050720641103E-05,0.999999999945,0.)); +#491222 = ORIENTED_EDGE('',*,*,#491223,.T.); +#491223 = EDGE_CURVE('',#491215,#491224,#491226,.T.); +#491224 = VERTEX_POINT('',#491225); +#491225 = CARTESIAN_POINT('',(125.21,-88.085,1.56)); +#491226 = LINE('',#491227,#491228); +#491227 = CARTESIAN_POINT('',(125.21,-87.715,1.56)); +#491228 = VECTOR('',#491229,1.); +#491229 = DIRECTION('',(0.,-1.,0.)); +#491230 = ORIENTED_EDGE('',*,*,#491231,.T.); +#491231 = EDGE_CURVE('',#491224,#491232,#491234,.T.); +#491232 = VERTEX_POINT('',#491233); +#491233 = CARTESIAN_POINT('',(125.345,-88.22,1.56)); +#491234 = CIRCLE('',#491235,0.135001418495); +#491235 = AXIS2_PLACEMENT_3D('',#491236,#491237,#491238); +#491236 = CARTESIAN_POINT('',(125.34500141848,-88.08499858151,1.56)); +#491237 = DIRECTION('',(0.,0.,1.)); +#491238 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#491239 = ORIENTED_EDGE('',*,*,#491240,.T.); +#491240 = EDGE_CURVE('',#491232,#491241,#491243,.T.); +#491241 = VERTEX_POINT('',#491242); +#491242 = CARTESIAN_POINT('',(125.615,-88.22,1.56)); +#491243 = LINE('',#491244,#491245); +#491244 = CARTESIAN_POINT('',(125.345,-88.22,1.56)); +#491245 = VECTOR('',#491246,1.); +#491246 = DIRECTION('',(1.,0.,0.)); +#491247 = ORIENTED_EDGE('',*,*,#491248,.T.); +#491248 = EDGE_CURVE('',#491241,#491249,#491251,.T.); +#491249 = VERTEX_POINT('',#491250); +#491250 = CARTESIAN_POINT('',(125.75,-88.085,1.56)); +#491251 = CIRCLE('',#491252,0.135001418495); +#491252 = AXIS2_PLACEMENT_3D('',#491253,#491254,#491255); +#491253 = CARTESIAN_POINT('',(125.61499858151,-88.08499858151,1.56)); +#491254 = DIRECTION('',(0.,0.,1.)); +#491255 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#491256 = ORIENTED_EDGE('',*,*,#491257,.T.); +#491257 = EDGE_CURVE('',#491249,#491196,#491258,.T.); +#491258 = LINE('',#491259,#491260); +#491259 = CARTESIAN_POINT('',(125.75,-88.085,1.56)); +#491260 = VECTOR('',#491261,1.); +#491261 = DIRECTION('',(0.,1.,0.)); +#491262 = FACE_BOUND('',#491263,.F.); +#491263 = EDGE_LOOP('',(#491264,#491275,#491283,#491292,#491300,#491309, + #491317,#491326)); +#491264 = ORIENTED_EDGE('',*,*,#491265,.T.); +#491265 = EDGE_CURVE('',#491266,#491268,#491270,.T.); +#491266 = VERTEX_POINT('',#491267); +#491267 = CARTESIAN_POINT('',(126.77,-87.715,1.56)); +#491268 = VERTEX_POINT('',#491269); +#491269 = CARTESIAN_POINT('',(126.635,-87.58,1.56)); +#491270 = CIRCLE('',#491271,0.135001418495); +#491271 = AXIS2_PLACEMENT_3D('',#491272,#491273,#491274); +#491272 = CARTESIAN_POINT('',(126.63499858151,-87.71500141848,1.56)); +#491273 = DIRECTION('',(0.,0.,1.)); +#491274 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#491275 = ORIENTED_EDGE('',*,*,#491276,.T.); +#491276 = EDGE_CURVE('',#491268,#491277,#491279,.T.); +#491277 = VERTEX_POINT('',#491278); +#491278 = CARTESIAN_POINT('',(126.365,-87.58,1.56)); +#491279 = LINE('',#491280,#491281); +#491280 = CARTESIAN_POINT('',(126.635,-87.58,1.56)); +#491281 = VECTOR('',#491282,1.); +#491282 = DIRECTION('',(-1.,0.,0.)); +#491283 = ORIENTED_EDGE('',*,*,#491284,.T.); +#491284 = EDGE_CURVE('',#491277,#491285,#491287,.T.); +#491285 = VERTEX_POINT('',#491286); +#491286 = CARTESIAN_POINT('',(126.23,-87.715,1.56)); +#491287 = CIRCLE('',#491288,0.135001418495); +#491288 = AXIS2_PLACEMENT_3D('',#491289,#491290,#491291); +#491289 = CARTESIAN_POINT('',(126.36500141848,-87.71500141848,1.56)); +#491290 = DIRECTION('',(0.,0.,1.)); +#491291 = DIRECTION('',(-1.050720662156E-05,0.999999999945,0.)); +#491292 = ORIENTED_EDGE('',*,*,#491293,.T.); +#491293 = EDGE_CURVE('',#491285,#491294,#491296,.T.); +#491294 = VERTEX_POINT('',#491295); +#491295 = CARTESIAN_POINT('',(126.23,-88.085,1.56)); +#491296 = LINE('',#491297,#491298); +#491297 = CARTESIAN_POINT('',(126.23,-87.715,1.56)); +#491298 = VECTOR('',#491299,1.); +#491299 = DIRECTION('',(0.,-1.,0.)); +#491300 = ORIENTED_EDGE('',*,*,#491301,.T.); +#491301 = EDGE_CURVE('',#491294,#491302,#491304,.T.); +#491302 = VERTEX_POINT('',#491303); +#491303 = CARTESIAN_POINT('',(126.365,-88.22,1.56)); +#491304 = CIRCLE('',#491305,0.135001418495); +#491305 = AXIS2_PLACEMENT_3D('',#491306,#491307,#491308); +#491306 = CARTESIAN_POINT('',(126.36500141848,-88.08499858151,1.56)); +#491307 = DIRECTION('',(0.,0.,1.)); +#491308 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#491309 = ORIENTED_EDGE('',*,*,#491310,.T.); +#491310 = EDGE_CURVE('',#491302,#491311,#491313,.T.); +#491311 = VERTEX_POINT('',#491312); +#491312 = CARTESIAN_POINT('',(126.635,-88.22,1.56)); +#491313 = LINE('',#491314,#491315); +#491314 = CARTESIAN_POINT('',(126.365,-88.22,1.56)); +#491315 = VECTOR('',#491316,1.); +#491316 = DIRECTION('',(1.,0.,0.)); +#491317 = ORIENTED_EDGE('',*,*,#491318,.T.); +#491318 = EDGE_CURVE('',#491311,#491319,#491321,.T.); +#491319 = VERTEX_POINT('',#491320); +#491320 = CARTESIAN_POINT('',(126.77,-88.085,1.56)); +#491321 = CIRCLE('',#491322,0.135001418495); +#491322 = AXIS2_PLACEMENT_3D('',#491323,#491324,#491325); +#491323 = CARTESIAN_POINT('',(126.63499858151,-88.08499858151,1.56)); +#491324 = DIRECTION('',(0.,0.,1.)); +#491325 = DIRECTION('',(1.050720662156E-05,-0.999999999945,0.)); +#491326 = ORIENTED_EDGE('',*,*,#491327,.T.); +#491327 = EDGE_CURVE('',#491319,#491266,#491328,.T.); +#491328 = LINE('',#491329,#491330); +#491329 = CARTESIAN_POINT('',(126.77,-88.085,1.56)); +#491330 = VECTOR('',#491331,1.); +#491331 = DIRECTION('',(0.,1.,0.)); +#491332 = FACE_BOUND('',#491333,.F.); +#491333 = EDGE_LOOP('',(#491334)); +#491334 = ORIENTED_EDGE('',*,*,#491335,.T.); +#491335 = EDGE_CURVE('',#491336,#491336,#491338,.T.); +#491336 = VERTEX_POINT('',#491337); +#491337 = CARTESIAN_POINT('',(136.124999,-86.52,1.56)); +#491338 = CIRCLE('',#491339,1.124999); +#491339 = AXIS2_PLACEMENT_3D('',#491340,#491341,#491342); +#491340 = CARTESIAN_POINT('',(135.,-86.52,1.56)); +#491341 = DIRECTION('',(0.,0.,1.)); +#491342 = DIRECTION('',(1.,0.,-0.)); +#491343 = FACE_BOUND('',#491344,.F.); +#491344 = EDGE_LOOP('',(#491345)); +#491345 = ORIENTED_EDGE('',*,*,#491346,.T.); +#491346 = EDGE_CURVE('',#491347,#491347,#491349,.T.); +#491347 = VERTEX_POINT('',#491348); +#491348 = CARTESIAN_POINT('',(138.624999,-86.52,1.56)); +#491349 = CIRCLE('',#491350,1.124999); +#491350 = AXIS2_PLACEMENT_3D('',#491351,#491352,#491353); +#491351 = CARTESIAN_POINT('',(137.5,-86.52,1.56)); +#491352 = DIRECTION('',(0.,0.,1.)); +#491353 = DIRECTION('',(1.,0.,-0.)); +#491354 = FACE_BOUND('',#491355,.F.); +#491355 = EDGE_LOOP('',(#491356)); +#491356 = ORIENTED_EDGE('',*,*,#491357,.T.); +#491357 = EDGE_CURVE('',#491358,#491358,#491360,.T.); +#491358 = VERTEX_POINT('',#491359); +#491359 = CARTESIAN_POINT('',(141.124999,-86.52,1.56)); +#491360 = CIRCLE('',#491361,1.124999); +#491361 = AXIS2_PLACEMENT_3D('',#491362,#491363,#491364); +#491362 = CARTESIAN_POINT('',(140.,-86.52,1.56)); +#491363 = DIRECTION('',(0.,0.,1.)); +#491364 = DIRECTION('',(1.,0.,-0.)); +#491365 = FACE_BOUND('',#491366,.F.); +#491366 = EDGE_LOOP('',(#491367,#491378,#491386,#491395,#491403,#491412, + #491420,#491429)); +#491367 = ORIENTED_EDGE('',*,*,#491368,.T.); +#491368 = EDGE_CURVE('',#491369,#491371,#491373,.T.); +#491369 = VERTEX_POINT('',#491370); +#491370 = CARTESIAN_POINT('',(124.4,-85.825,1.56)); +#491371 = VERTEX_POINT('',#491372); +#491372 = CARTESIAN_POINT('',(124.15,-85.575,1.56)); +#491373 = CIRCLE('',#491374,0.249998959685); +#491374 = AXIS2_PLACEMENT_3D('',#491375,#491376,#491377); +#491375 = CARTESIAN_POINT('',(124.15000104031,-85.82499895968,1.56)); +#491376 = DIRECTION('',(0.,0.,1.)); +#491377 = DIRECTION('',(0.999999999991,-4.161285837067E-06,0.)); +#491378 = ORIENTED_EDGE('',*,*,#491379,.T.); +#491379 = EDGE_CURVE('',#491371,#491380,#491382,.T.); +#491380 = VERTEX_POINT('',#491381); +#491381 = CARTESIAN_POINT('',(123.65,-85.575,1.56)); +#491382 = LINE('',#491383,#491384); +#491383 = CARTESIAN_POINT('',(124.15,-85.575,1.56)); +#491384 = VECTOR('',#491385,1.); +#491385 = DIRECTION('',(-1.,0.,0.)); +#491386 = ORIENTED_EDGE('',*,*,#491387,.T.); +#491387 = EDGE_CURVE('',#491380,#491388,#491390,.T.); +#491388 = VERTEX_POINT('',#491389); +#491389 = CARTESIAN_POINT('',(123.4,-85.825,1.56)); +#491390 = CIRCLE('',#491391,0.249998959685); +#491391 = AXIS2_PLACEMENT_3D('',#491392,#491393,#491394); +#491392 = CARTESIAN_POINT('',(123.64999895968,-85.82499895968,1.56)); +#491393 = DIRECTION('',(0.,0.,1.)); +#491394 = DIRECTION('',(4.16128589391E-06,0.999999999991,-0.)); +#491395 = ORIENTED_EDGE('',*,*,#491396,.T.); +#491396 = EDGE_CURVE('',#491388,#491397,#491399,.T.); +#491397 = VERTEX_POINT('',#491398); +#491398 = CARTESIAN_POINT('',(123.4,-86.775,1.56)); +#491399 = LINE('',#491400,#491401); +#491400 = CARTESIAN_POINT('',(123.4,-85.825,1.56)); +#491401 = VECTOR('',#491402,1.); +#491402 = DIRECTION('',(0.,-1.,0.)); +#491403 = ORIENTED_EDGE('',*,*,#491404,.T.); +#491404 = EDGE_CURVE('',#491397,#491405,#491407,.T.); +#491405 = VERTEX_POINT('',#491406); +#491406 = CARTESIAN_POINT('',(123.65,-87.025,1.56)); +#491407 = CIRCLE('',#491408,0.249998959685); +#491408 = AXIS2_PLACEMENT_3D('',#491409,#491410,#491411); +#491409 = CARTESIAN_POINT('',(123.64999895968,-86.77500104031,1.56)); +#491410 = DIRECTION('',(0.,0.,1.)); +#491411 = DIRECTION('',(-0.999999999991,4.16128589391E-06,0.)); +#491412 = ORIENTED_EDGE('',*,*,#491413,.T.); +#491413 = EDGE_CURVE('',#491405,#491414,#491416,.T.); +#491414 = VERTEX_POINT('',#491415); +#491415 = CARTESIAN_POINT('',(124.15,-87.025,1.56)); +#491416 = LINE('',#491417,#491418); +#491417 = CARTESIAN_POINT('',(123.65,-87.025,1.56)); +#491418 = VECTOR('',#491419,1.); +#491419 = DIRECTION('',(1.,0.,0.)); +#491420 = ORIENTED_EDGE('',*,*,#491421,.T.); +#491421 = EDGE_CURVE('',#491414,#491422,#491424,.T.); +#491422 = VERTEX_POINT('',#491423); +#491423 = CARTESIAN_POINT('',(124.4,-86.775,1.56)); +#491424 = CIRCLE('',#491425,0.249998959685); +#491425 = AXIS2_PLACEMENT_3D('',#491426,#491427,#491428); +#491426 = CARTESIAN_POINT('',(124.15000104031,-86.77500104031,1.56)); +#491427 = DIRECTION('',(0.,0.,1.)); +#491428 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#491429 = ORIENTED_EDGE('',*,*,#491430,.T.); +#491430 = EDGE_CURVE('',#491422,#491369,#491431,.T.); +#491431 = LINE('',#491432,#491433); +#491432 = CARTESIAN_POINT('',(124.4,-86.775,1.56)); +#491433 = VECTOR('',#491434,1.); +#491434 = DIRECTION('',(0.,1.,0.)); +#491435 = FACE_BOUND('',#491436,.F.); +#491436 = EDGE_LOOP('',(#491437,#491448,#491456,#491465,#491473,#491482, + #491490,#491499)); +#491437 = ORIENTED_EDGE('',*,*,#491438,.T.); +#491438 = EDGE_CURVE('',#491439,#491441,#491443,.T.); +#491439 = VERTEX_POINT('',#491440); +#491440 = CARTESIAN_POINT('',(126.3,-85.825,1.56)); +#491441 = VERTEX_POINT('',#491442); +#491442 = CARTESIAN_POINT('',(126.05,-85.575,1.56)); +#491443 = CIRCLE('',#491444,0.249998959685); +#491444 = AXIS2_PLACEMENT_3D('',#491445,#491446,#491447); +#491445 = CARTESIAN_POINT('',(126.05000104031,-85.82499895968,1.56)); +#491446 = DIRECTION('',(0.,0.,1.)); +#491447 = DIRECTION('',(0.999999999991,-4.161285837066E-06,0.)); +#491448 = ORIENTED_EDGE('',*,*,#491449,.T.); +#491449 = EDGE_CURVE('',#491441,#491450,#491452,.T.); +#491450 = VERTEX_POINT('',#491451); +#491451 = CARTESIAN_POINT('',(125.55,-85.575,1.56)); +#491452 = LINE('',#491453,#491454); +#491453 = CARTESIAN_POINT('',(126.05,-85.575,1.56)); +#491454 = VECTOR('',#491455,1.); +#491455 = DIRECTION('',(-1.,0.,0.)); +#491456 = ORIENTED_EDGE('',*,*,#491457,.T.); +#491457 = EDGE_CURVE('',#491450,#491458,#491460,.T.); +#491458 = VERTEX_POINT('',#491459); +#491459 = CARTESIAN_POINT('',(125.3,-85.825,1.56)); +#491460 = CIRCLE('',#491461,0.249998959685); +#491461 = AXIS2_PLACEMENT_3D('',#491462,#491463,#491464); +#491462 = CARTESIAN_POINT('',(125.54999895968,-85.82499895968,1.56)); +#491463 = DIRECTION('',(0.,0.,1.)); +#491464 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#491465 = ORIENTED_EDGE('',*,*,#491466,.T.); +#491466 = EDGE_CURVE('',#491458,#491467,#491469,.T.); +#491467 = VERTEX_POINT('',#491468); +#491468 = CARTESIAN_POINT('',(125.3,-86.775,1.56)); +#491469 = LINE('',#491470,#491471); +#491470 = CARTESIAN_POINT('',(125.3,-85.825,1.56)); +#491471 = VECTOR('',#491472,1.); +#491472 = DIRECTION('',(0.,-1.,0.)); +#491473 = ORIENTED_EDGE('',*,*,#491474,.T.); +#491474 = EDGE_CURVE('',#491467,#491475,#491477,.T.); +#491475 = VERTEX_POINT('',#491476); +#491476 = CARTESIAN_POINT('',(125.55,-87.025,1.56)); +#491477 = CIRCLE('',#491478,0.249998959685); +#491478 = AXIS2_PLACEMENT_3D('',#491479,#491480,#491481); +#491479 = CARTESIAN_POINT('',(125.54999895968,-86.77500104031,1.56)); +#491480 = DIRECTION('',(0.,0.,1.)); +#491481 = DIRECTION('',(-0.999999999991,4.16128589391E-06,0.)); +#491482 = ORIENTED_EDGE('',*,*,#491483,.T.); +#491483 = EDGE_CURVE('',#491475,#491484,#491486,.T.); +#491484 = VERTEX_POINT('',#491485); +#491485 = CARTESIAN_POINT('',(126.05,-87.025,1.56)); +#491486 = LINE('',#491487,#491488); +#491487 = CARTESIAN_POINT('',(125.55,-87.025,1.56)); +#491488 = VECTOR('',#491489,1.); +#491489 = DIRECTION('',(1.,0.,0.)); +#491490 = ORIENTED_EDGE('',*,*,#491491,.T.); +#491491 = EDGE_CURVE('',#491484,#491492,#491494,.T.); +#491492 = VERTEX_POINT('',#491493); +#491493 = CARTESIAN_POINT('',(126.3,-86.775,1.56)); +#491494 = CIRCLE('',#491495,0.249998959685); +#491495 = AXIS2_PLACEMENT_3D('',#491496,#491497,#491498); +#491496 = CARTESIAN_POINT('',(126.05000104031,-86.77500104031,1.56)); +#491497 = DIRECTION('',(0.,0.,1.)); +#491498 = DIRECTION('',(-4.161285837067E-06,-0.999999999991,0.)); +#491499 = ORIENTED_EDGE('',*,*,#491500,.T.); +#491500 = EDGE_CURVE('',#491492,#491439,#491501,.T.); +#491501 = LINE('',#491502,#491503); +#491502 = CARTESIAN_POINT('',(126.3,-86.775,1.56)); +#491503 = VECTOR('',#491504,1.); +#491504 = DIRECTION('',(0.,1.,0.)); +#491505 = FACE_BOUND('',#491506,.F.); +#491506 = EDGE_LOOP('',(#491507,#491518,#491526,#491535,#491543,#491552, + #491560,#491569)); +#491507 = ORIENTED_EDGE('',*,*,#491508,.T.); +#491508 = EDGE_CURVE('',#491509,#491511,#491513,.T.); +#491509 = VERTEX_POINT('',#491510); +#491510 = CARTESIAN_POINT('',(125.08,-84.455,1.56)); +#491511 = VERTEX_POINT('',#491512); +#491512 = CARTESIAN_POINT('',(124.94,-84.315,1.56)); +#491513 = CIRCLE('',#491514,0.139999827125); +#491514 = AXIS2_PLACEMENT_3D('',#491515,#491516,#491517); +#491515 = CARTESIAN_POINT('',(124.94000017287,-84.45499982712,1.56)); +#491516 = DIRECTION('',(0.,0.,1.)); +#491517 = DIRECTION('',(0.999999999999,-1.234820349747E-06,0.)); +#491518 = ORIENTED_EDGE('',*,*,#491519,.T.); +#491519 = EDGE_CURVE('',#491511,#491520,#491522,.T.); +#491520 = VERTEX_POINT('',#491521); +#491521 = CARTESIAN_POINT('',(124.66,-84.315,1.56)); +#491522 = LINE('',#491523,#491524); +#491523 = CARTESIAN_POINT('',(124.94,-84.315,1.56)); +#491524 = VECTOR('',#491525,1.); +#491525 = DIRECTION('',(-1.,0.,0.)); +#491526 = ORIENTED_EDGE('',*,*,#491527,.T.); +#491527 = EDGE_CURVE('',#491520,#491528,#491530,.T.); +#491528 = VERTEX_POINT('',#491529); +#491529 = CARTESIAN_POINT('',(124.52,-84.455,1.56)); +#491530 = CIRCLE('',#491531,0.139999827125); +#491531 = AXIS2_PLACEMENT_3D('',#491532,#491533,#491534); +#491532 = CARTESIAN_POINT('',(124.65999982712,-84.45499982712,1.56)); +#491533 = DIRECTION('',(0.,0.,1.)); +#491534 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#491535 = ORIENTED_EDGE('',*,*,#491536,.T.); +#491536 = EDGE_CURVE('',#491528,#491537,#491539,.T.); +#491537 = VERTEX_POINT('',#491538); +#491538 = CARTESIAN_POINT('',(124.52,-84.795,1.56)); +#491539 = LINE('',#491540,#491541); +#491540 = CARTESIAN_POINT('',(124.52,-84.455,1.56)); +#491541 = VECTOR('',#491542,1.); +#491542 = DIRECTION('',(0.,-1.,0.)); +#491543 = ORIENTED_EDGE('',*,*,#491544,.T.); +#491544 = EDGE_CURVE('',#491537,#491545,#491547,.T.); +#491545 = VERTEX_POINT('',#491546); +#491546 = CARTESIAN_POINT('',(124.66,-84.935,1.56)); +#491547 = CIRCLE('',#491548,0.139999827125); +#491548 = AXIS2_PLACEMENT_3D('',#491549,#491550,#491551); +#491549 = CARTESIAN_POINT('',(124.65999982712,-84.79500017287,1.56)); +#491550 = DIRECTION('',(0.,0.,1.)); +#491551 = DIRECTION('',(-0.999999999999,1.234820349747E-06,0.)); +#491552 = ORIENTED_EDGE('',*,*,#491553,.T.); +#491553 = EDGE_CURVE('',#491545,#491554,#491556,.T.); +#491554 = VERTEX_POINT('',#491555); +#491555 = CARTESIAN_POINT('',(124.94,-84.935,1.56)); +#491556 = LINE('',#491557,#491558); +#491557 = CARTESIAN_POINT('',(124.66,-84.935,1.56)); +#491558 = VECTOR('',#491559,1.); +#491559 = DIRECTION('',(1.,0.,0.)); +#491560 = ORIENTED_EDGE('',*,*,#491561,.T.); +#491561 = EDGE_CURVE('',#491554,#491562,#491564,.T.); +#491562 = VERTEX_POINT('',#491563); +#491563 = CARTESIAN_POINT('',(125.08,-84.795,1.56)); +#491564 = CIRCLE('',#491565,0.139999827125); +#491565 = AXIS2_PLACEMENT_3D('',#491566,#491567,#491568); +#491566 = CARTESIAN_POINT('',(124.94000017287,-84.79500017287,1.56)); +#491567 = DIRECTION('',(0.,0.,1.)); +#491568 = DIRECTION('',(-1.234820349747E-06,-0.999999999999,0.)); +#491569 = ORIENTED_EDGE('',*,*,#491570,.T.); +#491570 = EDGE_CURVE('',#491562,#491509,#491571,.T.); +#491571 = LINE('',#491572,#491573); +#491572 = CARTESIAN_POINT('',(125.08,-84.795,1.56)); +#491573 = VECTOR('',#491574,1.); +#491574 = DIRECTION('',(0.,1.,0.)); +#491575 = FACE_BOUND('',#491576,.F.); +#491576 = EDGE_LOOP('',(#491577,#491588,#491596,#491605,#491613,#491622, + #491630,#491639)); +#491577 = ORIENTED_EDGE('',*,*,#491578,.T.); +#491578 = EDGE_CURVE('',#491579,#491581,#491583,.T.); +#491579 = VERTEX_POINT('',#491580); +#491580 = CARTESIAN_POINT('',(126.04,-84.455,1.56)); +#491581 = VERTEX_POINT('',#491582); +#491582 = CARTESIAN_POINT('',(125.9,-84.315,1.56)); +#491583 = CIRCLE('',#491584,0.139999827125); +#491584 = AXIS2_PLACEMENT_3D('',#491585,#491586,#491587); +#491585 = CARTESIAN_POINT('',(125.90000017287,-84.45499982712,1.56)); +#491586 = DIRECTION('',(0.,0.,1.)); +#491587 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#491588 = ORIENTED_EDGE('',*,*,#491589,.T.); +#491589 = EDGE_CURVE('',#491581,#491590,#491592,.T.); +#491590 = VERTEX_POINT('',#491591); +#491591 = CARTESIAN_POINT('',(125.62,-84.315,1.56)); +#491592 = LINE('',#491593,#491594); +#491593 = CARTESIAN_POINT('',(125.9,-84.315,1.56)); +#491594 = VECTOR('',#491595,1.); +#491595 = DIRECTION('',(-1.,0.,0.)); +#491596 = ORIENTED_EDGE('',*,*,#491597,.T.); +#491597 = EDGE_CURVE('',#491590,#491598,#491600,.T.); +#491598 = VERTEX_POINT('',#491599); +#491599 = CARTESIAN_POINT('',(125.48,-84.455,1.56)); +#491600 = CIRCLE('',#491601,0.139999827125); +#491601 = AXIS2_PLACEMENT_3D('',#491602,#491603,#491604); +#491602 = CARTESIAN_POINT('',(125.61999982712,-84.45499982712,1.56)); +#491603 = DIRECTION('',(0.,0.,1.)); +#491604 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#491605 = ORIENTED_EDGE('',*,*,#491606,.T.); +#491606 = EDGE_CURVE('',#491598,#491607,#491609,.T.); +#491607 = VERTEX_POINT('',#491608); +#491608 = CARTESIAN_POINT('',(125.48,-84.795,1.56)); +#491609 = LINE('',#491610,#491611); +#491610 = CARTESIAN_POINT('',(125.48,-84.455,1.56)); +#491611 = VECTOR('',#491612,1.); +#491612 = DIRECTION('',(0.,-1.,0.)); +#491613 = ORIENTED_EDGE('',*,*,#491614,.T.); +#491614 = EDGE_CURVE('',#491607,#491615,#491617,.T.); +#491615 = VERTEX_POINT('',#491616); +#491616 = CARTESIAN_POINT('',(125.62,-84.935,1.56)); +#491617 = CIRCLE('',#491618,0.139999827125); +#491618 = AXIS2_PLACEMENT_3D('',#491619,#491620,#491621); +#491619 = CARTESIAN_POINT('',(125.61999982712,-84.79500017287,1.56)); +#491620 = DIRECTION('',(0.,0.,1.)); +#491621 = DIRECTION('',(-0.999999999999,1.234820349747E-06,0.)); +#491622 = ORIENTED_EDGE('',*,*,#491623,.T.); +#491623 = EDGE_CURVE('',#491615,#491624,#491626,.T.); +#491624 = VERTEX_POINT('',#491625); +#491625 = CARTESIAN_POINT('',(125.9,-84.935,1.56)); +#491626 = LINE('',#491627,#491628); +#491627 = CARTESIAN_POINT('',(125.62,-84.935,1.56)); +#491628 = VECTOR('',#491629,1.); +#491629 = DIRECTION('',(1.,0.,0.)); +#491630 = ORIENTED_EDGE('',*,*,#491631,.T.); +#491631 = EDGE_CURVE('',#491624,#491632,#491634,.T.); +#491632 = VERTEX_POINT('',#491633); +#491633 = CARTESIAN_POINT('',(126.04,-84.795,1.56)); +#491634 = CIRCLE('',#491635,0.139999827125); +#491635 = AXIS2_PLACEMENT_3D('',#491636,#491637,#491638); +#491636 = CARTESIAN_POINT('',(125.90000017287,-84.79500017287,1.56)); +#491637 = DIRECTION('',(0.,0.,1.)); +#491638 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#491639 = ORIENTED_EDGE('',*,*,#491640,.T.); +#491640 = EDGE_CURVE('',#491632,#491579,#491641,.T.); +#491641 = LINE('',#491642,#491643); +#491642 = CARTESIAN_POINT('',(126.04,-84.795,1.56)); +#491643 = VECTOR('',#491644,1.); +#491644 = DIRECTION('',(0.,1.,0.)); +#491645 = FACE_BOUND('',#491646,.F.); +#491646 = EDGE_LOOP('',(#491647,#491658,#491666,#491675,#491683,#491692, + #491700,#491709)); +#491647 = ORIENTED_EDGE('',*,*,#491648,.T.); +#491648 = EDGE_CURVE('',#491649,#491651,#491653,.T.); +#491649 = VERTEX_POINT('',#491650); +#491650 = CARTESIAN_POINT('',(122.9,-82.175,1.56)); +#491651 = VERTEX_POINT('',#491652); +#491652 = CARTESIAN_POINT('',(122.75,-82.025,1.56)); +#491653 = CIRCLE('',#491654,0.150000058649); +#491654 = AXIS2_PLACEMENT_3D('',#491655,#491656,#491657); +#491655 = CARTESIAN_POINT('',(122.74999994135,-82.17500005864,1.56)); +#491656 = DIRECTION('',(0.,0.,1.)); +#491657 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#491658 = ORIENTED_EDGE('',*,*,#491659,.T.); +#491659 = EDGE_CURVE('',#491651,#491660,#491662,.T.); +#491660 = VERTEX_POINT('',#491661); +#491661 = CARTESIAN_POINT('',(122.45,-82.025,1.56)); +#491662 = LINE('',#491663,#491664); +#491663 = CARTESIAN_POINT('',(122.75,-82.025,1.56)); +#491664 = VECTOR('',#491665,1.); +#491665 = DIRECTION('',(-1.,0.,0.)); +#491666 = ORIENTED_EDGE('',*,*,#491667,.T.); +#491667 = EDGE_CURVE('',#491660,#491668,#491670,.T.); +#491668 = VERTEX_POINT('',#491669); +#491669 = CARTESIAN_POINT('',(122.3,-82.175,1.56)); +#491670 = CIRCLE('',#491671,0.150000058649); +#491671 = AXIS2_PLACEMENT_3D('',#491672,#491673,#491674); +#491672 = CARTESIAN_POINT('',(122.45000005864,-82.17500005864,1.56)); +#491673 = DIRECTION('',(0.,0.,1.)); +#491674 = DIRECTION('',(-3.90995314237E-07,1.,0.)); +#491675 = ORIENTED_EDGE('',*,*,#491676,.T.); +#491676 = EDGE_CURVE('',#491668,#491677,#491679,.T.); +#491677 = VERTEX_POINT('',#491678); +#491678 = CARTESIAN_POINT('',(122.3,-83.425,1.56)); +#491679 = LINE('',#491680,#491681); +#491680 = CARTESIAN_POINT('',(122.3,-82.175,1.56)); +#491681 = VECTOR('',#491682,1.); +#491682 = DIRECTION('',(0.,-1.,0.)); +#491683 = ORIENTED_EDGE('',*,*,#491684,.T.); +#491684 = EDGE_CURVE('',#491677,#491685,#491687,.T.); +#491685 = VERTEX_POINT('',#491686); +#491686 = CARTESIAN_POINT('',(122.45,-83.575,1.56)); +#491687 = CIRCLE('',#491688,0.150000058649); +#491688 = AXIS2_PLACEMENT_3D('',#491689,#491690,#491691); +#491689 = CARTESIAN_POINT('',(122.45000005864,-83.42499994135,1.56)); +#491690 = DIRECTION('',(0.,0.,1.)); +#491691 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#491692 = ORIENTED_EDGE('',*,*,#491693,.T.); +#491693 = EDGE_CURVE('',#491685,#491694,#491696,.T.); +#491694 = VERTEX_POINT('',#491695); +#491695 = CARTESIAN_POINT('',(122.75,-83.575,1.56)); +#491696 = LINE('',#491697,#491698); +#491697 = CARTESIAN_POINT('',(122.45,-83.575,1.56)); +#491698 = VECTOR('',#491699,1.); +#491699 = DIRECTION('',(1.,0.,0.)); +#491700 = ORIENTED_EDGE('',*,*,#491701,.T.); +#491701 = EDGE_CURVE('',#491694,#491702,#491704,.T.); +#491702 = VERTEX_POINT('',#491703); +#491703 = CARTESIAN_POINT('',(122.9,-83.425,1.56)); +#491704 = CIRCLE('',#491705,0.150000058649); +#491705 = AXIS2_PLACEMENT_3D('',#491706,#491707,#491708); +#491706 = CARTESIAN_POINT('',(122.74999994135,-83.42499994135,1.56)); +#491707 = DIRECTION('',(0.,0.,1.)); +#491708 = DIRECTION('',(3.909955037149E-07,-1.,0.)); +#491709 = ORIENTED_EDGE('',*,*,#491710,.T.); +#491710 = EDGE_CURVE('',#491702,#491649,#491711,.T.); +#491711 = LINE('',#491712,#491713); +#491712 = CARTESIAN_POINT('',(122.9,-83.425,1.56)); +#491713 = VECTOR('',#491714,1.); +#491714 = DIRECTION('',(0.,1.,0.)); +#491715 = FACE_BOUND('',#491716,.F.); +#491716 = EDGE_LOOP('',(#491717,#491728,#491736,#491745,#491753,#491762, + #491770,#491779)); +#491717 = ORIENTED_EDGE('',*,*,#491718,.T.); +#491718 = EDGE_CURVE('',#491719,#491721,#491723,.T.); +#491719 = VERTEX_POINT('',#491720); +#491720 = CARTESIAN_POINT('',(123.9,-82.175,1.56)); +#491721 = VERTEX_POINT('',#491722); +#491722 = CARTESIAN_POINT('',(123.75,-82.025,1.56)); +#491723 = CIRCLE('',#491724,0.150000058649); +#491724 = AXIS2_PLACEMENT_3D('',#491725,#491726,#491727); +#491725 = CARTESIAN_POINT('',(123.74999994135,-82.17500005864,1.56)); +#491726 = DIRECTION('',(0.,0.,1.)); +#491727 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#491728 = ORIENTED_EDGE('',*,*,#491729,.T.); +#491729 = EDGE_CURVE('',#491721,#491730,#491732,.T.); +#491730 = VERTEX_POINT('',#491731); +#491731 = CARTESIAN_POINT('',(123.45,-82.025,1.56)); +#491732 = LINE('',#491733,#491734); +#491733 = CARTESIAN_POINT('',(123.75,-82.025,1.56)); +#491734 = VECTOR('',#491735,1.); +#491735 = DIRECTION('',(-1.,0.,0.)); +#491736 = ORIENTED_EDGE('',*,*,#491737,.T.); +#491737 = EDGE_CURVE('',#491730,#491738,#491740,.T.); +#491738 = VERTEX_POINT('',#491739); +#491739 = CARTESIAN_POINT('',(123.3,-82.175,1.56)); +#491740 = CIRCLE('',#491741,0.150000058649); +#491741 = AXIS2_PLACEMENT_3D('',#491742,#491743,#491744); +#491742 = CARTESIAN_POINT('',(123.45000005864,-82.17500005864,1.56)); +#491743 = DIRECTION('',(0.,0.,1.)); +#491744 = DIRECTION('',(-3.90995314237E-07,1.,0.)); +#491745 = ORIENTED_EDGE('',*,*,#491746,.T.); +#491746 = EDGE_CURVE('',#491738,#491747,#491749,.T.); +#491747 = VERTEX_POINT('',#491748); +#491748 = CARTESIAN_POINT('',(123.3,-83.425,1.56)); +#491749 = LINE('',#491750,#491751); +#491750 = CARTESIAN_POINT('',(123.3,-82.175,1.56)); +#491751 = VECTOR('',#491752,1.); +#491752 = DIRECTION('',(0.,-1.,0.)); +#491753 = ORIENTED_EDGE('',*,*,#491754,.T.); +#491754 = EDGE_CURVE('',#491747,#491755,#491757,.T.); +#491755 = VERTEX_POINT('',#491756); +#491756 = CARTESIAN_POINT('',(123.45,-83.575,1.56)); +#491757 = CIRCLE('',#491758,0.150000058649); +#491758 = AXIS2_PLACEMENT_3D('',#491759,#491760,#491761); +#491759 = CARTESIAN_POINT('',(123.45000005864,-83.42499994135,1.56)); +#491760 = DIRECTION('',(0.,0.,1.)); +#491761 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#491762 = ORIENTED_EDGE('',*,*,#491763,.T.); +#491763 = EDGE_CURVE('',#491755,#491764,#491766,.T.); +#491764 = VERTEX_POINT('',#491765); +#491765 = CARTESIAN_POINT('',(123.75,-83.575,1.56)); +#491766 = LINE('',#491767,#491768); +#491767 = CARTESIAN_POINT('',(123.45,-83.575,1.56)); +#491768 = VECTOR('',#491769,1.); +#491769 = DIRECTION('',(1.,0.,0.)); +#491770 = ORIENTED_EDGE('',*,*,#491771,.T.); +#491771 = EDGE_CURVE('',#491764,#491772,#491774,.T.); +#491772 = VERTEX_POINT('',#491773); +#491773 = CARTESIAN_POINT('',(123.9,-83.425,1.56)); +#491774 = CIRCLE('',#491775,0.150000058649); +#491775 = AXIS2_PLACEMENT_3D('',#491776,#491777,#491778); +#491776 = CARTESIAN_POINT('',(123.74999994135,-83.42499994135,1.56)); +#491777 = DIRECTION('',(0.,0.,1.)); +#491778 = DIRECTION('',(3.909955037149E-07,-1.,0.)); +#491779 = ORIENTED_EDGE('',*,*,#491780,.T.); +#491780 = EDGE_CURVE('',#491772,#491719,#491781,.T.); +#491781 = LINE('',#491782,#491783); +#491782 = CARTESIAN_POINT('',(123.9,-83.425,1.56)); +#491783 = VECTOR('',#491784,1.); +#491784 = DIRECTION('',(0.,1.,0.)); +#491785 = FACE_BOUND('',#491786,.F.); +#491786 = EDGE_LOOP('',(#491787,#491798,#491806,#491815,#491823,#491832, + #491840,#491849)); +#491787 = ORIENTED_EDGE('',*,*,#491788,.T.); +#491788 = EDGE_CURVE('',#491789,#491791,#491793,.T.); +#491789 = VERTEX_POINT('',#491790); +#491790 = CARTESIAN_POINT('',(124.9,-82.175,1.56)); +#491791 = VERTEX_POINT('',#491792); +#491792 = CARTESIAN_POINT('',(124.75,-82.025,1.56)); +#491793 = CIRCLE('',#491794,0.150000058649); +#491794 = AXIS2_PLACEMENT_3D('',#491795,#491796,#491797); +#491795 = CARTESIAN_POINT('',(124.74999994135,-82.17500005864,1.56)); +#491796 = DIRECTION('',(0.,0.,1.)); +#491797 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#491798 = ORIENTED_EDGE('',*,*,#491799,.T.); +#491799 = EDGE_CURVE('',#491791,#491800,#491802,.T.); +#491800 = VERTEX_POINT('',#491801); +#491801 = CARTESIAN_POINT('',(124.45,-82.025,1.56)); +#491802 = LINE('',#491803,#491804); +#491803 = CARTESIAN_POINT('',(124.75,-82.025,1.56)); +#491804 = VECTOR('',#491805,1.); +#491805 = DIRECTION('',(-1.,0.,0.)); +#491806 = ORIENTED_EDGE('',*,*,#491807,.T.); +#491807 = EDGE_CURVE('',#491800,#491808,#491810,.T.); +#491808 = VERTEX_POINT('',#491809); +#491809 = CARTESIAN_POINT('',(124.3,-82.175,1.56)); +#491810 = CIRCLE('',#491811,0.150000058649); +#491811 = AXIS2_PLACEMENT_3D('',#491812,#491813,#491814); +#491812 = CARTESIAN_POINT('',(124.45000005864,-82.17500005864,1.56)); +#491813 = DIRECTION('',(0.,0.,1.)); +#491814 = DIRECTION('',(-3.90995314237E-07,1.,0.)); +#491815 = ORIENTED_EDGE('',*,*,#491816,.T.); +#491816 = EDGE_CURVE('',#491808,#491817,#491819,.T.); +#491817 = VERTEX_POINT('',#491818); +#491818 = CARTESIAN_POINT('',(124.3,-83.425,1.56)); +#491819 = LINE('',#491820,#491821); +#491820 = CARTESIAN_POINT('',(124.3,-82.175,1.56)); +#491821 = VECTOR('',#491822,1.); +#491822 = DIRECTION('',(0.,-1.,0.)); +#491823 = ORIENTED_EDGE('',*,*,#491824,.T.); +#491824 = EDGE_CURVE('',#491817,#491825,#491827,.T.); +#491825 = VERTEX_POINT('',#491826); +#491826 = CARTESIAN_POINT('',(124.45,-83.575,1.56)); +#491827 = CIRCLE('',#491828,0.150000058649); +#491828 = AXIS2_PLACEMENT_3D('',#491829,#491830,#491831); +#491829 = CARTESIAN_POINT('',(124.45000005864,-83.42499994135,1.56)); +#491830 = DIRECTION('',(0.,0.,1.)); +#491831 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#491832 = ORIENTED_EDGE('',*,*,#491833,.T.); +#491833 = EDGE_CURVE('',#491825,#491834,#491836,.T.); +#491834 = VERTEX_POINT('',#491835); +#491835 = CARTESIAN_POINT('',(124.75,-83.575,1.56)); +#491836 = LINE('',#491837,#491838); +#491837 = CARTESIAN_POINT('',(124.45,-83.575,1.56)); +#491838 = VECTOR('',#491839,1.); +#491839 = DIRECTION('',(1.,0.,0.)); +#491840 = ORIENTED_EDGE('',*,*,#491841,.T.); +#491841 = EDGE_CURVE('',#491834,#491842,#491844,.T.); +#491842 = VERTEX_POINT('',#491843); +#491843 = CARTESIAN_POINT('',(124.9,-83.425,1.56)); +#491844 = CIRCLE('',#491845,0.150000058649); +#491845 = AXIS2_PLACEMENT_3D('',#491846,#491847,#491848); +#491846 = CARTESIAN_POINT('',(124.74999994135,-83.42499994135,1.56)); +#491847 = DIRECTION('',(0.,0.,1.)); +#491848 = DIRECTION('',(3.909955037149E-07,-1.,0.)); +#491849 = ORIENTED_EDGE('',*,*,#491850,.T.); +#491850 = EDGE_CURVE('',#491842,#491789,#491851,.T.); +#491851 = LINE('',#491852,#491853); +#491852 = CARTESIAN_POINT('',(124.9,-83.425,1.56)); +#491853 = VECTOR('',#491854,1.); +#491854 = DIRECTION('',(0.,1.,0.)); +#491855 = FACE_BOUND('',#491856,.F.); +#491856 = EDGE_LOOP('',(#491857,#491868,#491876,#491885,#491893,#491902, + #491910,#491919)); +#491857 = ORIENTED_EDGE('',*,*,#491858,.T.); +#491858 = EDGE_CURVE('',#491859,#491861,#491863,.T.); +#491859 = VERTEX_POINT('',#491860); +#491860 = CARTESIAN_POINT('',(125.9,-82.175,1.56)); +#491861 = VERTEX_POINT('',#491862); +#491862 = CARTESIAN_POINT('',(125.75,-82.025,1.56)); +#491863 = CIRCLE('',#491864,0.150000058649); +#491864 = AXIS2_PLACEMENT_3D('',#491865,#491866,#491867); +#491865 = CARTESIAN_POINT('',(125.74999994135,-82.17500005864,1.56)); +#491866 = DIRECTION('',(0.,0.,1.)); +#491867 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#491868 = ORIENTED_EDGE('',*,*,#491869,.T.); +#491869 = EDGE_CURVE('',#491861,#491870,#491872,.T.); +#491870 = VERTEX_POINT('',#491871); +#491871 = CARTESIAN_POINT('',(125.45,-82.025,1.56)); +#491872 = LINE('',#491873,#491874); +#491873 = CARTESIAN_POINT('',(125.75,-82.025,1.56)); +#491874 = VECTOR('',#491875,1.); +#491875 = DIRECTION('',(-1.,0.,0.)); +#491876 = ORIENTED_EDGE('',*,*,#491877,.T.); +#491877 = EDGE_CURVE('',#491870,#491878,#491880,.T.); +#491878 = VERTEX_POINT('',#491879); +#491879 = CARTESIAN_POINT('',(125.3,-82.175,1.56)); +#491880 = CIRCLE('',#491881,0.150000058649); +#491881 = AXIS2_PLACEMENT_3D('',#491882,#491883,#491884); +#491882 = CARTESIAN_POINT('',(125.45000005864,-82.17500005864,1.56)); +#491883 = DIRECTION('',(0.,0.,1.)); +#491884 = DIRECTION('',(-3.90995314237E-07,1.,0.)); +#491885 = ORIENTED_EDGE('',*,*,#491886,.T.); +#491886 = EDGE_CURVE('',#491878,#491887,#491889,.T.); +#491887 = VERTEX_POINT('',#491888); +#491888 = CARTESIAN_POINT('',(125.3,-83.425,1.56)); +#491889 = LINE('',#491890,#491891); +#491890 = CARTESIAN_POINT('',(125.3,-82.175,1.56)); +#491891 = VECTOR('',#491892,1.); +#491892 = DIRECTION('',(0.,-1.,0.)); +#491893 = ORIENTED_EDGE('',*,*,#491894,.T.); +#491894 = EDGE_CURVE('',#491887,#491895,#491897,.T.); +#491895 = VERTEX_POINT('',#491896); +#491896 = CARTESIAN_POINT('',(125.45,-83.575,1.56)); +#491897 = CIRCLE('',#491898,0.150000058649); +#491898 = AXIS2_PLACEMENT_3D('',#491899,#491900,#491901); +#491899 = CARTESIAN_POINT('',(125.45000005864,-83.42499994135,1.56)); +#491900 = DIRECTION('',(0.,0.,1.)); +#491901 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#491902 = ORIENTED_EDGE('',*,*,#491903,.T.); +#491903 = EDGE_CURVE('',#491895,#491904,#491906,.T.); +#491904 = VERTEX_POINT('',#491905); +#491905 = CARTESIAN_POINT('',(125.75,-83.575,1.56)); +#491906 = LINE('',#491907,#491908); +#491907 = CARTESIAN_POINT('',(125.45,-83.575,1.56)); +#491908 = VECTOR('',#491909,1.); +#491909 = DIRECTION('',(1.,0.,0.)); +#491910 = ORIENTED_EDGE('',*,*,#491911,.T.); +#491911 = EDGE_CURVE('',#491904,#491912,#491914,.T.); +#491912 = VERTEX_POINT('',#491913); +#491913 = CARTESIAN_POINT('',(125.9,-83.425,1.56)); +#491914 = CIRCLE('',#491915,0.150000058649); +#491915 = AXIS2_PLACEMENT_3D('',#491916,#491917,#491918); +#491916 = CARTESIAN_POINT('',(125.74999994135,-83.42499994135,1.56)); +#491917 = DIRECTION('',(0.,0.,1.)); +#491918 = DIRECTION('',(3.909955037149E-07,-1.,0.)); +#491919 = ORIENTED_EDGE('',*,*,#491920,.T.); +#491920 = EDGE_CURVE('',#491912,#491859,#491921,.T.); +#491921 = LINE('',#491922,#491923); +#491922 = CARTESIAN_POINT('',(125.9,-83.425,1.56)); +#491923 = VECTOR('',#491924,1.); +#491924 = DIRECTION('',(0.,1.,0.)); +#491925 = FACE_BOUND('',#491926,.F.); +#491926 = EDGE_LOOP('',(#491927,#491938,#491946,#491955,#491963,#491972, + #491980,#491989)); +#491927 = ORIENTED_EDGE('',*,*,#491928,.T.); +#491928 = EDGE_CURVE('',#491929,#491931,#491933,.T.); +#491929 = VERTEX_POINT('',#491930); +#491930 = CARTESIAN_POINT('',(148.82,-83.115,1.56)); +#491931 = VERTEX_POINT('',#491932); +#491932 = CARTESIAN_POINT('',(148.685,-82.98,1.56)); +#491933 = CIRCLE('',#491934,0.135001418495); +#491934 = AXIS2_PLACEMENT_3D('',#491935,#491936,#491937); +#491935 = CARTESIAN_POINT('',(148.68499858151,-83.11500141848,1.56)); +#491936 = DIRECTION('',(0.,0.,1.)); +#491937 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#491938 = ORIENTED_EDGE('',*,*,#491939,.T.); +#491939 = EDGE_CURVE('',#491931,#491940,#491942,.T.); +#491940 = VERTEX_POINT('',#491941); +#491941 = CARTESIAN_POINT('',(148.315,-82.98,1.56)); +#491942 = LINE('',#491943,#491944); +#491943 = CARTESIAN_POINT('',(148.685,-82.98,1.56)); +#491944 = VECTOR('',#491945,1.); +#491945 = DIRECTION('',(-1.,0.,0.)); +#491946 = ORIENTED_EDGE('',*,*,#491947,.T.); +#491947 = EDGE_CURVE('',#491940,#491948,#491950,.T.); +#491948 = VERTEX_POINT('',#491949); +#491949 = CARTESIAN_POINT('',(148.18,-83.115,1.56)); +#491950 = CIRCLE('',#491951,0.135001418495); +#491951 = AXIS2_PLACEMENT_3D('',#491952,#491953,#491954); +#491952 = CARTESIAN_POINT('',(148.31500141848,-83.11500141848,1.56)); +#491953 = DIRECTION('',(0.,0.,1.)); +#491954 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#491955 = ORIENTED_EDGE('',*,*,#491956,.T.); +#491956 = EDGE_CURVE('',#491948,#491957,#491959,.T.); +#491957 = VERTEX_POINT('',#491958); +#491958 = CARTESIAN_POINT('',(148.18,-83.385,1.56)); +#491959 = LINE('',#491960,#491961); +#491960 = CARTESIAN_POINT('',(148.18,-83.115,1.56)); +#491961 = VECTOR('',#491962,1.); +#491962 = DIRECTION('',(0.,-1.,0.)); +#491963 = ORIENTED_EDGE('',*,*,#491964,.T.); +#491964 = EDGE_CURVE('',#491957,#491965,#491967,.T.); +#491965 = VERTEX_POINT('',#491966); +#491966 = CARTESIAN_POINT('',(148.315,-83.52,1.56)); +#491967 = CIRCLE('',#491968,0.135001418495); +#491968 = AXIS2_PLACEMENT_3D('',#491969,#491970,#491971); +#491969 = CARTESIAN_POINT('',(148.31500141848,-83.38499858151,1.56)); +#491970 = DIRECTION('',(0.,0.,1.)); +#491971 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#491972 = ORIENTED_EDGE('',*,*,#491973,.T.); +#491973 = EDGE_CURVE('',#491965,#491974,#491976,.T.); +#491974 = VERTEX_POINT('',#491975); +#491975 = CARTESIAN_POINT('',(148.685,-83.52,1.56)); +#491976 = LINE('',#491977,#491978); +#491977 = CARTESIAN_POINT('',(148.315,-83.52,1.56)); +#491978 = VECTOR('',#491979,1.); +#491979 = DIRECTION('',(1.,0.,0.)); +#491980 = ORIENTED_EDGE('',*,*,#491981,.T.); +#491981 = EDGE_CURVE('',#491974,#491982,#491984,.T.); +#491982 = VERTEX_POINT('',#491983); +#491983 = CARTESIAN_POINT('',(148.82,-83.385,1.56)); +#491984 = CIRCLE('',#491985,0.135001418495); +#491985 = AXIS2_PLACEMENT_3D('',#491986,#491987,#491988); +#491986 = CARTESIAN_POINT('',(148.68499858151,-83.38499858151,1.56)); +#491987 = DIRECTION('',(0.,0.,1.)); +#491988 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#491989 = ORIENTED_EDGE('',*,*,#491990,.T.); +#491990 = EDGE_CURVE('',#491982,#491929,#491991,.T.); +#491991 = LINE('',#491992,#491993); +#491992 = CARTESIAN_POINT('',(148.82,-83.385,1.56)); +#491993 = VECTOR('',#491994,1.); +#491994 = DIRECTION('',(0.,1.,0.)); +#491995 = FACE_BOUND('',#491996,.F.); +#491996 = EDGE_LOOP('',(#491997,#492007,#492015,#492023)); +#491997 = ORIENTED_EDGE('',*,*,#491998,.T.); +#491998 = EDGE_CURVE('',#491999,#492001,#492003,.T.); +#491999 = VERTEX_POINT('',#492000); +#492000 = CARTESIAN_POINT('',(131.465,-83.16,1.56)); +#492001 = VERTEX_POINT('',#492002); +#492002 = CARTESIAN_POINT('',(131.465,-81.66,1.56)); +#492003 = LINE('',#492004,#492005); +#492004 = CARTESIAN_POINT('',(131.465,-83.16,1.56)); +#492005 = VECTOR('',#492006,1.); +#492006 = DIRECTION('',(0.,1.,0.)); +#492007 = ORIENTED_EDGE('',*,*,#492008,.T.); +#492008 = EDGE_CURVE('',#492001,#492009,#492011,.T.); +#492009 = VERTEX_POINT('',#492010); +#492010 = CARTESIAN_POINT('',(130.565,-81.66,1.56)); +#492011 = LINE('',#492012,#492013); +#492012 = CARTESIAN_POINT('',(131.465,-81.66,1.56)); +#492013 = VECTOR('',#492014,1.); +#492014 = DIRECTION('',(-1.,0.,0.)); +#492015 = ORIENTED_EDGE('',*,*,#492016,.T.); +#492016 = EDGE_CURVE('',#492009,#492017,#492019,.T.); +#492017 = VERTEX_POINT('',#492018); +#492018 = CARTESIAN_POINT('',(130.565,-83.16,1.56)); +#492019 = LINE('',#492020,#492021); +#492020 = CARTESIAN_POINT('',(130.565,-81.66,1.56)); +#492021 = VECTOR('',#492022,1.); +#492022 = DIRECTION('',(0.,-1.,0.)); +#492023 = ORIENTED_EDGE('',*,*,#492024,.T.); +#492024 = EDGE_CURVE('',#492017,#491999,#492025,.T.); +#492025 = LINE('',#492026,#492027); +#492026 = CARTESIAN_POINT('',(130.565,-83.16,1.56)); +#492027 = VECTOR('',#492028,1.); +#492028 = DIRECTION('',(1.,0.,0.)); +#492029 = FACE_BOUND('',#492030,.F.); +#492030 = EDGE_LOOP('',(#492031,#492041,#492049,#492057)); +#492031 = ORIENTED_EDGE('',*,*,#492032,.T.); +#492032 = EDGE_CURVE('',#492033,#492035,#492037,.T.); +#492033 = VERTEX_POINT('',#492034); +#492034 = CARTESIAN_POINT('',(132.735,-83.16,1.56)); +#492035 = VERTEX_POINT('',#492036); +#492036 = CARTESIAN_POINT('',(132.735,-81.66,1.56)); +#492037 = LINE('',#492038,#492039); +#492038 = CARTESIAN_POINT('',(132.735,-83.16,1.56)); +#492039 = VECTOR('',#492040,1.); +#492040 = DIRECTION('',(0.,1.,0.)); +#492041 = ORIENTED_EDGE('',*,*,#492042,.T.); +#492042 = EDGE_CURVE('',#492035,#492043,#492045,.T.); +#492043 = VERTEX_POINT('',#492044); +#492044 = CARTESIAN_POINT('',(131.835,-81.66,1.56)); +#492045 = LINE('',#492046,#492047); +#492046 = CARTESIAN_POINT('',(132.735,-81.66,1.56)); +#492047 = VECTOR('',#492048,1.); +#492048 = DIRECTION('',(-1.,0.,0.)); +#492049 = ORIENTED_EDGE('',*,*,#492050,.T.); +#492050 = EDGE_CURVE('',#492043,#492051,#492053,.T.); +#492051 = VERTEX_POINT('',#492052); +#492052 = CARTESIAN_POINT('',(131.835,-83.16,1.56)); +#492053 = LINE('',#492054,#492055); +#492054 = CARTESIAN_POINT('',(131.835,-81.66,1.56)); +#492055 = VECTOR('',#492056,1.); +#492056 = DIRECTION('',(0.,-1.,0.)); +#492057 = ORIENTED_EDGE('',*,*,#492058,.T.); +#492058 = EDGE_CURVE('',#492051,#492033,#492059,.T.); +#492059 = LINE('',#492060,#492061); +#492060 = CARTESIAN_POINT('',(131.835,-83.16,1.56)); +#492061 = VECTOR('',#492062,1.); +#492062 = DIRECTION('',(1.,0.,0.)); +#492063 = FACE_BOUND('',#492064,.F.); +#492064 = EDGE_LOOP('',(#492065,#492075,#492083,#492091)); +#492065 = ORIENTED_EDGE('',*,*,#492066,.T.); +#492066 = EDGE_CURVE('',#492067,#492069,#492071,.T.); +#492067 = VERTEX_POINT('',#492068); +#492068 = CARTESIAN_POINT('',(134.005,-83.16,1.56)); +#492069 = VERTEX_POINT('',#492070); +#492070 = CARTESIAN_POINT('',(134.005,-81.66,1.56)); +#492071 = LINE('',#492072,#492073); +#492072 = CARTESIAN_POINT('',(134.005,-83.16,1.56)); +#492073 = VECTOR('',#492074,1.); +#492074 = DIRECTION('',(0.,1.,0.)); +#492075 = ORIENTED_EDGE('',*,*,#492076,.T.); +#492076 = EDGE_CURVE('',#492069,#492077,#492079,.T.); +#492077 = VERTEX_POINT('',#492078); +#492078 = CARTESIAN_POINT('',(133.105,-81.66,1.56)); +#492079 = LINE('',#492080,#492081); +#492080 = CARTESIAN_POINT('',(134.005,-81.66,1.56)); +#492081 = VECTOR('',#492082,1.); +#492082 = DIRECTION('',(-1.,0.,0.)); +#492083 = ORIENTED_EDGE('',*,*,#492084,.T.); +#492084 = EDGE_CURVE('',#492077,#492085,#492087,.T.); +#492085 = VERTEX_POINT('',#492086); +#492086 = CARTESIAN_POINT('',(133.105,-83.16,1.56)); +#492087 = LINE('',#492088,#492089); +#492088 = CARTESIAN_POINT('',(133.105,-81.66,1.56)); +#492089 = VECTOR('',#492090,1.); +#492090 = DIRECTION('',(0.,-1.,0.)); +#492091 = ORIENTED_EDGE('',*,*,#492092,.T.); +#492092 = EDGE_CURVE('',#492085,#492067,#492093,.T.); +#492093 = LINE('',#492094,#492095); +#492094 = CARTESIAN_POINT('',(133.105,-83.16,1.56)); +#492095 = VECTOR('',#492096,1.); +#492096 = DIRECTION('',(1.,0.,0.)); +#492097 = FACE_BOUND('',#492098,.F.); +#492098 = EDGE_LOOP('',(#492099,#492109,#492117,#492125)); +#492099 = ORIENTED_EDGE('',*,*,#492100,.T.); +#492100 = EDGE_CURVE('',#492101,#492103,#492105,.T.); +#492101 = VERTEX_POINT('',#492102); +#492102 = CARTESIAN_POINT('',(135.275,-83.16,1.56)); +#492103 = VERTEX_POINT('',#492104); +#492104 = CARTESIAN_POINT('',(135.275,-81.66,1.56)); +#492105 = LINE('',#492106,#492107); +#492106 = CARTESIAN_POINT('',(135.275,-83.16,1.56)); +#492107 = VECTOR('',#492108,1.); +#492108 = DIRECTION('',(0.,1.,0.)); +#492109 = ORIENTED_EDGE('',*,*,#492110,.T.); +#492110 = EDGE_CURVE('',#492103,#492111,#492113,.T.); +#492111 = VERTEX_POINT('',#492112); +#492112 = CARTESIAN_POINT('',(134.375,-81.66,1.56)); +#492113 = LINE('',#492114,#492115); +#492114 = CARTESIAN_POINT('',(135.275,-81.66,1.56)); +#492115 = VECTOR('',#492116,1.); +#492116 = DIRECTION('',(-1.,0.,0.)); +#492117 = ORIENTED_EDGE('',*,*,#492118,.T.); +#492118 = EDGE_CURVE('',#492111,#492119,#492121,.T.); +#492119 = VERTEX_POINT('',#492120); +#492120 = CARTESIAN_POINT('',(134.375,-83.16,1.56)); +#492121 = LINE('',#492122,#492123); +#492122 = CARTESIAN_POINT('',(134.375,-81.66,1.56)); +#492123 = VECTOR('',#492124,1.); +#492124 = DIRECTION('',(0.,-1.,0.)); +#492125 = ORIENTED_EDGE('',*,*,#492126,.T.); +#492126 = EDGE_CURVE('',#492119,#492101,#492127,.T.); +#492127 = LINE('',#492128,#492129); +#492128 = CARTESIAN_POINT('',(134.375,-83.16,1.56)); +#492129 = VECTOR('',#492130,1.); +#492130 = DIRECTION('',(1.,0.,0.)); +#492131 = FACE_BOUND('',#492132,.F.); +#492132 = EDGE_LOOP('',(#492133,#492143,#492151,#492159)); +#492133 = ORIENTED_EDGE('',*,*,#492134,.T.); +#492134 = EDGE_CURVE('',#492135,#492137,#492139,.T.); +#492135 = VERTEX_POINT('',#492136); +#492136 = CARTESIAN_POINT('',(136.545,-83.16,1.56)); +#492137 = VERTEX_POINT('',#492138); +#492138 = CARTESIAN_POINT('',(136.545,-81.66,1.56)); +#492139 = LINE('',#492140,#492141); +#492140 = CARTESIAN_POINT('',(136.545,-83.16,1.56)); +#492141 = VECTOR('',#492142,1.); +#492142 = DIRECTION('',(0.,1.,0.)); +#492143 = ORIENTED_EDGE('',*,*,#492144,.T.); +#492144 = EDGE_CURVE('',#492137,#492145,#492147,.T.); +#492145 = VERTEX_POINT('',#492146); +#492146 = CARTESIAN_POINT('',(135.645,-81.66,1.56)); +#492147 = LINE('',#492148,#492149); +#492148 = CARTESIAN_POINT('',(136.545,-81.66,1.56)); +#492149 = VECTOR('',#492150,1.); +#492150 = DIRECTION('',(-1.,0.,0.)); +#492151 = ORIENTED_EDGE('',*,*,#492152,.T.); +#492152 = EDGE_CURVE('',#492145,#492153,#492155,.T.); +#492153 = VERTEX_POINT('',#492154); +#492154 = CARTESIAN_POINT('',(135.645,-83.16,1.56)); +#492155 = LINE('',#492156,#492157); +#492156 = CARTESIAN_POINT('',(135.645,-81.66,1.56)); +#492157 = VECTOR('',#492158,1.); +#492158 = DIRECTION('',(0.,-1.,0.)); +#492159 = ORIENTED_EDGE('',*,*,#492160,.T.); +#492160 = EDGE_CURVE('',#492153,#492135,#492161,.T.); +#492161 = LINE('',#492162,#492163); +#492162 = CARTESIAN_POINT('',(135.645,-83.16,1.56)); +#492163 = VECTOR('',#492164,1.); +#492164 = DIRECTION('',(1.,0.,0.)); +#492165 = FACE_BOUND('',#492166,.F.); +#492166 = EDGE_LOOP('',(#492167,#492177,#492185,#492193)); +#492167 = ORIENTED_EDGE('',*,*,#492168,.T.); +#492168 = EDGE_CURVE('',#492169,#492171,#492173,.T.); +#492169 = VERTEX_POINT('',#492170); +#492170 = CARTESIAN_POINT('',(137.815,-83.16,1.56)); +#492171 = VERTEX_POINT('',#492172); +#492172 = CARTESIAN_POINT('',(137.815,-81.66,1.56)); +#492173 = LINE('',#492174,#492175); +#492174 = CARTESIAN_POINT('',(137.815,-83.16,1.56)); +#492175 = VECTOR('',#492176,1.); +#492176 = DIRECTION('',(0.,1.,0.)); +#492177 = ORIENTED_EDGE('',*,*,#492178,.T.); +#492178 = EDGE_CURVE('',#492171,#492179,#492181,.T.); +#492179 = VERTEX_POINT('',#492180); +#492180 = CARTESIAN_POINT('',(136.915,-81.66,1.56)); +#492181 = LINE('',#492182,#492183); +#492182 = CARTESIAN_POINT('',(137.815,-81.66,1.56)); +#492183 = VECTOR('',#492184,1.); +#492184 = DIRECTION('',(-1.,0.,0.)); +#492185 = ORIENTED_EDGE('',*,*,#492186,.T.); +#492186 = EDGE_CURVE('',#492179,#492187,#492189,.T.); +#492187 = VERTEX_POINT('',#492188); +#492188 = CARTESIAN_POINT('',(136.915,-83.16,1.56)); +#492189 = LINE('',#492190,#492191); +#492190 = CARTESIAN_POINT('',(136.915,-81.66,1.56)); +#492191 = VECTOR('',#492192,1.); +#492192 = DIRECTION('',(0.,-1.,0.)); +#492193 = ORIENTED_EDGE('',*,*,#492194,.T.); +#492194 = EDGE_CURVE('',#492187,#492169,#492195,.T.); +#492195 = LINE('',#492196,#492197); +#492196 = CARTESIAN_POINT('',(136.915,-83.16,1.56)); +#492197 = VECTOR('',#492198,1.); +#492198 = DIRECTION('',(1.,0.,0.)); +#492199 = FACE_BOUND('',#492200,.F.); +#492200 = EDGE_LOOP('',(#492201,#492211,#492219,#492227)); +#492201 = ORIENTED_EDGE('',*,*,#492202,.T.); +#492202 = EDGE_CURVE('',#492203,#492205,#492207,.T.); +#492203 = VERTEX_POINT('',#492204); +#492204 = CARTESIAN_POINT('',(139.085,-83.16,1.56)); +#492205 = VERTEX_POINT('',#492206); +#492206 = CARTESIAN_POINT('',(139.085,-81.66,1.56)); +#492207 = LINE('',#492208,#492209); +#492208 = CARTESIAN_POINT('',(139.085,-83.16,1.56)); +#492209 = VECTOR('',#492210,1.); +#492210 = DIRECTION('',(0.,1.,0.)); +#492211 = ORIENTED_EDGE('',*,*,#492212,.T.); +#492212 = EDGE_CURVE('',#492205,#492213,#492215,.T.); +#492213 = VERTEX_POINT('',#492214); +#492214 = CARTESIAN_POINT('',(138.185,-81.66,1.56)); +#492215 = LINE('',#492216,#492217); +#492216 = CARTESIAN_POINT('',(139.085,-81.66,1.56)); +#492217 = VECTOR('',#492218,1.); +#492218 = DIRECTION('',(-1.,0.,0.)); +#492219 = ORIENTED_EDGE('',*,*,#492220,.T.); +#492220 = EDGE_CURVE('',#492213,#492221,#492223,.T.); +#492221 = VERTEX_POINT('',#492222); +#492222 = CARTESIAN_POINT('',(138.185,-83.16,1.56)); +#492223 = LINE('',#492224,#492225); +#492224 = CARTESIAN_POINT('',(138.185,-81.66,1.56)); +#492225 = VECTOR('',#492226,1.); +#492226 = DIRECTION('',(0.,-1.,0.)); +#492227 = ORIENTED_EDGE('',*,*,#492228,.T.); +#492228 = EDGE_CURVE('',#492221,#492203,#492229,.T.); +#492229 = LINE('',#492230,#492231); +#492230 = CARTESIAN_POINT('',(138.185,-83.16,1.56)); +#492231 = VECTOR('',#492232,1.); +#492232 = DIRECTION('',(1.,0.,0.)); +#492233 = FACE_BOUND('',#492234,.F.); +#492234 = EDGE_LOOP('',(#492235,#492245,#492253,#492261)); +#492235 = ORIENTED_EDGE('',*,*,#492236,.T.); +#492236 = EDGE_CURVE('',#492237,#492239,#492241,.T.); +#492237 = VERTEX_POINT('',#492238); +#492238 = CARTESIAN_POINT('',(140.355,-83.16,1.56)); +#492239 = VERTEX_POINT('',#492240); +#492240 = CARTESIAN_POINT('',(140.355,-81.66,1.56)); +#492241 = LINE('',#492242,#492243); +#492242 = CARTESIAN_POINT('',(140.355,-83.16,1.56)); +#492243 = VECTOR('',#492244,1.); +#492244 = DIRECTION('',(0.,1.,0.)); +#492245 = ORIENTED_EDGE('',*,*,#492246,.T.); +#492246 = EDGE_CURVE('',#492239,#492247,#492249,.T.); +#492247 = VERTEX_POINT('',#492248); +#492248 = CARTESIAN_POINT('',(139.455,-81.66,1.56)); +#492249 = LINE('',#492250,#492251); +#492250 = CARTESIAN_POINT('',(140.355,-81.66,1.56)); +#492251 = VECTOR('',#492252,1.); +#492252 = DIRECTION('',(-1.,0.,0.)); +#492253 = ORIENTED_EDGE('',*,*,#492254,.T.); +#492254 = EDGE_CURVE('',#492247,#492255,#492257,.T.); +#492255 = VERTEX_POINT('',#492256); +#492256 = CARTESIAN_POINT('',(139.455,-83.16,1.56)); +#492257 = LINE('',#492258,#492259); +#492258 = CARTESIAN_POINT('',(139.455,-81.66,1.56)); +#492259 = VECTOR('',#492260,1.); +#492260 = DIRECTION('',(0.,-1.,0.)); +#492261 = ORIENTED_EDGE('',*,*,#492262,.T.); +#492262 = EDGE_CURVE('',#492255,#492237,#492263,.T.); +#492263 = LINE('',#492264,#492265); +#492264 = CARTESIAN_POINT('',(139.455,-83.16,1.56)); +#492265 = VECTOR('',#492266,1.); +#492266 = DIRECTION('',(1.,0.,0.)); +#492267 = FACE_BOUND('',#492268,.F.); +#492268 = EDGE_LOOP('',(#492269,#492279,#492287,#492295)); +#492269 = ORIENTED_EDGE('',*,*,#492270,.T.); +#492270 = EDGE_CURVE('',#492271,#492273,#492275,.T.); +#492271 = VERTEX_POINT('',#492272); +#492272 = CARTESIAN_POINT('',(141.625,-83.16,1.56)); +#492273 = VERTEX_POINT('',#492274); +#492274 = CARTESIAN_POINT('',(141.625,-81.66,1.56)); +#492275 = LINE('',#492276,#492277); +#492276 = CARTESIAN_POINT('',(141.625,-83.16,1.56)); +#492277 = VECTOR('',#492278,1.); +#492278 = DIRECTION('',(0.,1.,0.)); +#492279 = ORIENTED_EDGE('',*,*,#492280,.T.); +#492280 = EDGE_CURVE('',#492273,#492281,#492283,.T.); +#492281 = VERTEX_POINT('',#492282); +#492282 = CARTESIAN_POINT('',(140.725,-81.66,1.56)); +#492283 = LINE('',#492284,#492285); +#492284 = CARTESIAN_POINT('',(141.625,-81.66,1.56)); +#492285 = VECTOR('',#492286,1.); +#492286 = DIRECTION('',(-1.,0.,0.)); +#492287 = ORIENTED_EDGE('',*,*,#492288,.T.); +#492288 = EDGE_CURVE('',#492281,#492289,#492291,.T.); +#492289 = VERTEX_POINT('',#492290); +#492290 = CARTESIAN_POINT('',(140.725,-83.16,1.56)); +#492291 = LINE('',#492292,#492293); +#492292 = CARTESIAN_POINT('',(140.725,-81.66,1.56)); +#492293 = VECTOR('',#492294,1.); +#492294 = DIRECTION('',(0.,-1.,0.)); +#492295 = ORIENTED_EDGE('',*,*,#492296,.T.); +#492296 = EDGE_CURVE('',#492289,#492271,#492297,.T.); +#492297 = LINE('',#492298,#492299); +#492298 = CARTESIAN_POINT('',(140.725,-83.16,1.56)); +#492299 = VECTOR('',#492300,1.); +#492300 = DIRECTION('',(1.,0.,0.)); +#492301 = FACE_BOUND('',#492302,.F.); +#492302 = EDGE_LOOP('',(#492303,#492313,#492321,#492329)); +#492303 = ORIENTED_EDGE('',*,*,#492304,.T.); +#492304 = EDGE_CURVE('',#492305,#492307,#492309,.T.); +#492305 = VERTEX_POINT('',#492306); +#492306 = CARTESIAN_POINT('',(142.895,-83.16,1.56)); +#492307 = VERTEX_POINT('',#492308); +#492308 = CARTESIAN_POINT('',(142.895,-81.66,1.56)); +#492309 = LINE('',#492310,#492311); +#492310 = CARTESIAN_POINT('',(142.895,-83.16,1.56)); +#492311 = VECTOR('',#492312,1.); +#492312 = DIRECTION('',(0.,1.,0.)); +#492313 = ORIENTED_EDGE('',*,*,#492314,.T.); +#492314 = EDGE_CURVE('',#492307,#492315,#492317,.T.); +#492315 = VERTEX_POINT('',#492316); +#492316 = CARTESIAN_POINT('',(141.995,-81.66,1.56)); +#492317 = LINE('',#492318,#492319); +#492318 = CARTESIAN_POINT('',(142.895,-81.66,1.56)); +#492319 = VECTOR('',#492320,1.); +#492320 = DIRECTION('',(-1.,0.,0.)); +#492321 = ORIENTED_EDGE('',*,*,#492322,.T.); +#492322 = EDGE_CURVE('',#492315,#492323,#492325,.T.); +#492323 = VERTEX_POINT('',#492324); +#492324 = CARTESIAN_POINT('',(141.995,-83.16,1.56)); +#492325 = LINE('',#492326,#492327); +#492326 = CARTESIAN_POINT('',(141.995,-81.66,1.56)); +#492327 = VECTOR('',#492328,1.); +#492328 = DIRECTION('',(0.,-1.,0.)); +#492329 = ORIENTED_EDGE('',*,*,#492330,.T.); +#492330 = EDGE_CURVE('',#492323,#492305,#492331,.T.); +#492331 = LINE('',#492332,#492333); +#492332 = CARTESIAN_POINT('',(141.995,-83.16,1.56)); +#492333 = VECTOR('',#492334,1.); +#492334 = DIRECTION('',(1.,0.,0.)); +#492335 = FACE_BOUND('',#492336,.F.); +#492336 = EDGE_LOOP('',(#492337,#492347,#492355,#492363)); +#492337 = ORIENTED_EDGE('',*,*,#492338,.T.); +#492338 = EDGE_CURVE('',#492339,#492341,#492343,.T.); +#492339 = VERTEX_POINT('',#492340); +#492340 = CARTESIAN_POINT('',(144.165,-83.16,1.56)); +#492341 = VERTEX_POINT('',#492342); +#492342 = CARTESIAN_POINT('',(144.165,-81.66,1.56)); +#492343 = LINE('',#492344,#492345); +#492344 = CARTESIAN_POINT('',(144.165,-83.16,1.56)); +#492345 = VECTOR('',#492346,1.); +#492346 = DIRECTION('',(0.,1.,0.)); +#492347 = ORIENTED_EDGE('',*,*,#492348,.T.); +#492348 = EDGE_CURVE('',#492341,#492349,#492351,.T.); +#492349 = VERTEX_POINT('',#492350); +#492350 = CARTESIAN_POINT('',(143.265,-81.66,1.56)); +#492351 = LINE('',#492352,#492353); +#492352 = CARTESIAN_POINT('',(144.165,-81.66,1.56)); +#492353 = VECTOR('',#492354,1.); +#492354 = DIRECTION('',(-1.,0.,0.)); +#492355 = ORIENTED_EDGE('',*,*,#492356,.T.); +#492356 = EDGE_CURVE('',#492349,#492357,#492359,.T.); +#492357 = VERTEX_POINT('',#492358); +#492358 = CARTESIAN_POINT('',(143.265,-83.16,1.56)); +#492359 = LINE('',#492360,#492361); +#492360 = CARTESIAN_POINT('',(143.265,-81.66,1.56)); +#492361 = VECTOR('',#492362,1.); +#492362 = DIRECTION('',(0.,-1.,0.)); +#492363 = ORIENTED_EDGE('',*,*,#492364,.T.); +#492364 = EDGE_CURVE('',#492357,#492339,#492365,.T.); +#492365 = LINE('',#492366,#492367); +#492366 = CARTESIAN_POINT('',(143.265,-83.16,1.56)); +#492367 = VECTOR('',#492368,1.); +#492368 = DIRECTION('',(1.,0.,0.)); +#492369 = FACE_BOUND('',#492370,.F.); +#492370 = EDGE_LOOP('',(#492371,#492381,#492389,#492397)); +#492371 = ORIENTED_EDGE('',*,*,#492372,.T.); +#492372 = EDGE_CURVE('',#492373,#492375,#492377,.T.); +#492373 = VERTEX_POINT('',#492374); +#492374 = CARTESIAN_POINT('',(145.435,-83.16,1.56)); +#492375 = VERTEX_POINT('',#492376); +#492376 = CARTESIAN_POINT('',(145.435,-81.66,1.56)); +#492377 = LINE('',#492378,#492379); +#492378 = CARTESIAN_POINT('',(145.435,-83.16,1.56)); +#492379 = VECTOR('',#492380,1.); +#492380 = DIRECTION('',(0.,1.,0.)); +#492381 = ORIENTED_EDGE('',*,*,#492382,.T.); +#492382 = EDGE_CURVE('',#492375,#492383,#492385,.T.); +#492383 = VERTEX_POINT('',#492384); +#492384 = CARTESIAN_POINT('',(144.535,-81.66,1.56)); +#492385 = LINE('',#492386,#492387); +#492386 = CARTESIAN_POINT('',(145.435,-81.66,1.56)); +#492387 = VECTOR('',#492388,1.); +#492388 = DIRECTION('',(-1.,0.,0.)); +#492389 = ORIENTED_EDGE('',*,*,#492390,.T.); +#492390 = EDGE_CURVE('',#492383,#492391,#492393,.T.); +#492391 = VERTEX_POINT('',#492392); +#492392 = CARTESIAN_POINT('',(144.535,-83.16,1.56)); +#492393 = LINE('',#492394,#492395); +#492394 = CARTESIAN_POINT('',(144.535,-81.66,1.56)); +#492395 = VECTOR('',#492396,1.); +#492396 = DIRECTION('',(0.,-1.,0.)); +#492397 = ORIENTED_EDGE('',*,*,#492398,.T.); +#492398 = EDGE_CURVE('',#492391,#492373,#492399,.T.); +#492399 = LINE('',#492400,#492401); +#492400 = CARTESIAN_POINT('',(144.535,-83.16,1.56)); +#492401 = VECTOR('',#492402,1.); +#492402 = DIRECTION('',(1.,0.,0.)); +#492403 = FACE_BOUND('',#492404,.F.); +#492404 = EDGE_LOOP('',(#492405,#492416,#492424,#492433,#492441,#492450, + #492458,#492467)); +#492405 = ORIENTED_EDGE('',*,*,#492406,.T.); +#492406 = EDGE_CURVE('',#492407,#492409,#492411,.T.); +#492407 = VERTEX_POINT('',#492408); +#492408 = CARTESIAN_POINT('',(148.82,-82.095,1.56)); +#492409 = VERTEX_POINT('',#492410); +#492410 = CARTESIAN_POINT('',(148.685,-81.96,1.56)); +#492411 = CIRCLE('',#492412,0.135001418495); +#492412 = AXIS2_PLACEMENT_3D('',#492413,#492414,#492415); +#492413 = CARTESIAN_POINT('',(148.68499858151,-82.09500141848,1.56)); +#492414 = DIRECTION('',(0.,0.,1.)); +#492415 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#492416 = ORIENTED_EDGE('',*,*,#492417,.T.); +#492417 = EDGE_CURVE('',#492409,#492418,#492420,.T.); +#492418 = VERTEX_POINT('',#492419); +#492419 = CARTESIAN_POINT('',(148.315,-81.96,1.56)); +#492420 = LINE('',#492421,#492422); +#492421 = CARTESIAN_POINT('',(148.685,-81.96,1.56)); +#492422 = VECTOR('',#492423,1.); +#492423 = DIRECTION('',(-1.,0.,0.)); +#492424 = ORIENTED_EDGE('',*,*,#492425,.T.); +#492425 = EDGE_CURVE('',#492418,#492426,#492428,.T.); +#492426 = VERTEX_POINT('',#492427); +#492427 = CARTESIAN_POINT('',(148.18,-82.095,1.56)); +#492428 = CIRCLE('',#492429,0.135001418495); +#492429 = AXIS2_PLACEMENT_3D('',#492430,#492431,#492432); +#492430 = CARTESIAN_POINT('',(148.31500141848,-82.09500141848,1.56)); +#492431 = DIRECTION('',(0.,0.,1.)); +#492432 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#492433 = ORIENTED_EDGE('',*,*,#492434,.T.); +#492434 = EDGE_CURVE('',#492426,#492435,#492437,.T.); +#492435 = VERTEX_POINT('',#492436); +#492436 = CARTESIAN_POINT('',(148.18,-82.365,1.56)); +#492437 = LINE('',#492438,#492439); +#492438 = CARTESIAN_POINT('',(148.18,-82.095,1.56)); +#492439 = VECTOR('',#492440,1.); +#492440 = DIRECTION('',(0.,-1.,0.)); +#492441 = ORIENTED_EDGE('',*,*,#492442,.T.); +#492442 = EDGE_CURVE('',#492435,#492443,#492445,.T.); +#492443 = VERTEX_POINT('',#492444); +#492444 = CARTESIAN_POINT('',(148.315,-82.5,1.56)); +#492445 = CIRCLE('',#492446,0.135001418495); +#492446 = AXIS2_PLACEMENT_3D('',#492447,#492448,#492449); +#492447 = CARTESIAN_POINT('',(148.31500141848,-82.36499858151,1.56)); +#492448 = DIRECTION('',(0.,0.,1.)); +#492449 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#492450 = ORIENTED_EDGE('',*,*,#492451,.T.); +#492451 = EDGE_CURVE('',#492443,#492452,#492454,.T.); +#492452 = VERTEX_POINT('',#492453); +#492453 = CARTESIAN_POINT('',(148.685,-82.5,1.56)); +#492454 = LINE('',#492455,#492456); +#492455 = CARTESIAN_POINT('',(148.315,-82.5,1.56)); +#492456 = VECTOR('',#492457,1.); +#492457 = DIRECTION('',(1.,0.,0.)); +#492458 = ORIENTED_EDGE('',*,*,#492459,.T.); +#492459 = EDGE_CURVE('',#492452,#492460,#492462,.T.); +#492460 = VERTEX_POINT('',#492461); +#492461 = CARTESIAN_POINT('',(148.82,-82.365,1.56)); +#492462 = CIRCLE('',#492463,0.135001418495); +#492463 = AXIS2_PLACEMENT_3D('',#492464,#492465,#492466); +#492464 = CARTESIAN_POINT('',(148.68499858151,-82.36499858151,1.56)); +#492465 = DIRECTION('',(0.,0.,1.)); +#492466 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#492467 = ORIENTED_EDGE('',*,*,#492468,.T.); +#492468 = EDGE_CURVE('',#492460,#492407,#492469,.T.); +#492469 = LINE('',#492470,#492471); +#492470 = CARTESIAN_POINT('',(148.82,-82.365,1.56)); +#492471 = VECTOR('',#492472,1.); +#492472 = DIRECTION('',(0.,1.,0.)); +#492473 = FACE_BOUND('',#492474,.F.); +#492474 = EDGE_LOOP('',(#492475,#492485,#492493,#492501)); +#492475 = ORIENTED_EDGE('',*,*,#492476,.T.); +#492476 = EDGE_CURVE('',#492477,#492479,#492481,.T.); +#492477 = VERTEX_POINT('',#492478); +#492478 = CARTESIAN_POINT('',(130.,-81.61,1.56)); +#492479 = VERTEX_POINT('',#492480); +#492480 = CARTESIAN_POINT('',(130.,-80.71,1.56)); +#492481 = LINE('',#492482,#492483); +#492482 = CARTESIAN_POINT('',(130.,-81.61,1.56)); +#492483 = VECTOR('',#492484,1.); +#492484 = DIRECTION('',(0.,1.,0.)); +#492485 = ORIENTED_EDGE('',*,*,#492486,.T.); +#492486 = EDGE_CURVE('',#492479,#492487,#492489,.T.); +#492487 = VERTEX_POINT('',#492488); +#492488 = CARTESIAN_POINT('',(128.5,-80.71,1.56)); +#492489 = LINE('',#492490,#492491); +#492490 = CARTESIAN_POINT('',(130.,-80.71,1.56)); +#492491 = VECTOR('',#492492,1.); +#492492 = DIRECTION('',(-1.,0.,0.)); +#492493 = ORIENTED_EDGE('',*,*,#492494,.T.); +#492494 = EDGE_CURVE('',#492487,#492495,#492497,.T.); +#492495 = VERTEX_POINT('',#492496); +#492496 = CARTESIAN_POINT('',(128.5,-81.61,1.56)); +#492497 = LINE('',#492498,#492499); +#492498 = CARTESIAN_POINT('',(128.5,-80.71,1.56)); +#492499 = VECTOR('',#492500,1.); +#492500 = DIRECTION('',(0.,-1.,0.)); +#492501 = ORIENTED_EDGE('',*,*,#492502,.T.); +#492502 = EDGE_CURVE('',#492495,#492477,#492503,.T.); +#492503 = LINE('',#492504,#492505); +#492504 = CARTESIAN_POINT('',(128.5,-81.61,1.56)); +#492505 = VECTOR('',#492506,1.); +#492506 = DIRECTION('',(1.,0.,0.)); +#492507 = FACE_BOUND('',#492508,.F.); +#492508 = EDGE_LOOP('',(#492509,#492519,#492527,#492535)); +#492509 = ORIENTED_EDGE('',*,*,#492510,.T.); +#492510 = EDGE_CURVE('',#492511,#492513,#492515,.T.); +#492511 = VERTEX_POINT('',#492512); +#492512 = CARTESIAN_POINT('',(147.5,-81.61,1.56)); +#492513 = VERTEX_POINT('',#492514); +#492514 = CARTESIAN_POINT('',(147.5,-80.71,1.56)); +#492515 = LINE('',#492516,#492517); +#492516 = CARTESIAN_POINT('',(147.5,-81.61,1.56)); +#492517 = VECTOR('',#492518,1.); +#492518 = DIRECTION('',(0.,1.,0.)); +#492519 = ORIENTED_EDGE('',*,*,#492520,.T.); +#492520 = EDGE_CURVE('',#492513,#492521,#492523,.T.); +#492521 = VERTEX_POINT('',#492522); +#492522 = CARTESIAN_POINT('',(146.,-80.71,1.56)); +#492523 = LINE('',#492524,#492525); +#492524 = CARTESIAN_POINT('',(147.5,-80.71,1.56)); +#492525 = VECTOR('',#492526,1.); +#492526 = DIRECTION('',(-1.,0.,0.)); +#492527 = ORIENTED_EDGE('',*,*,#492528,.T.); +#492528 = EDGE_CURVE('',#492521,#492529,#492531,.T.); +#492529 = VERTEX_POINT('',#492530); +#492530 = CARTESIAN_POINT('',(146.,-81.61,1.56)); +#492531 = LINE('',#492532,#492533); +#492532 = CARTESIAN_POINT('',(146.,-80.71,1.56)); +#492533 = VECTOR('',#492534,1.); +#492534 = DIRECTION('',(0.,-1.,0.)); +#492535 = ORIENTED_EDGE('',*,*,#492536,.T.); +#492536 = EDGE_CURVE('',#492529,#492511,#492537,.T.); +#492537 = LINE('',#492538,#492539); +#492538 = CARTESIAN_POINT('',(146.,-81.61,1.56)); +#492539 = VECTOR('',#492540,1.); +#492540 = DIRECTION('',(1.,0.,0.)); +#492541 = FACE_BOUND('',#492542,.F.); +#492542 = EDGE_LOOP('',(#492543,#492553,#492561,#492569)); +#492543 = ORIENTED_EDGE('',*,*,#492544,.T.); +#492544 = EDGE_CURVE('',#492545,#492547,#492549,.T.); +#492545 = VERTEX_POINT('',#492546); +#492546 = CARTESIAN_POINT('',(130.,-80.34,1.56)); +#492547 = VERTEX_POINT('',#492548); +#492548 = CARTESIAN_POINT('',(130.,-79.44,1.56)); +#492549 = LINE('',#492550,#492551); +#492550 = CARTESIAN_POINT('',(130.,-80.34,1.56)); +#492551 = VECTOR('',#492552,1.); +#492552 = DIRECTION('',(0.,1.,0.)); +#492553 = ORIENTED_EDGE('',*,*,#492554,.T.); +#492554 = EDGE_CURVE('',#492547,#492555,#492557,.T.); +#492555 = VERTEX_POINT('',#492556); +#492556 = CARTESIAN_POINT('',(128.5,-79.44,1.56)); +#492557 = LINE('',#492558,#492559); +#492558 = CARTESIAN_POINT('',(130.,-79.44,1.56)); +#492559 = VECTOR('',#492560,1.); +#492560 = DIRECTION('',(-1.,0.,0.)); +#492561 = ORIENTED_EDGE('',*,*,#492562,.T.); +#492562 = EDGE_CURVE('',#492555,#492563,#492565,.T.); +#492563 = VERTEX_POINT('',#492564); +#492564 = CARTESIAN_POINT('',(128.5,-80.34,1.56)); +#492565 = LINE('',#492566,#492567); +#492566 = CARTESIAN_POINT('',(128.5,-79.44,1.56)); +#492567 = VECTOR('',#492568,1.); +#492568 = DIRECTION('',(0.,-1.,0.)); +#492569 = ORIENTED_EDGE('',*,*,#492570,.T.); +#492570 = EDGE_CURVE('',#492563,#492545,#492571,.T.); +#492571 = LINE('',#492572,#492573); +#492572 = CARTESIAN_POINT('',(128.5,-80.34,1.56)); +#492573 = VECTOR('',#492574,1.); +#492574 = DIRECTION('',(1.,0.,0.)); +#492575 = FACE_BOUND('',#492576,.F.); +#492576 = EDGE_LOOP('',(#492577,#492587,#492595,#492603)); +#492577 = ORIENTED_EDGE('',*,*,#492578,.T.); +#492578 = EDGE_CURVE('',#492579,#492581,#492583,.T.); +#492579 = VERTEX_POINT('',#492580); +#492580 = CARTESIAN_POINT('',(147.5,-80.34,1.56)); +#492581 = VERTEX_POINT('',#492582); +#492582 = CARTESIAN_POINT('',(147.5,-79.44,1.56)); +#492583 = LINE('',#492584,#492585); +#492584 = CARTESIAN_POINT('',(147.5,-80.34,1.56)); +#492585 = VECTOR('',#492586,1.); +#492586 = DIRECTION('',(0.,1.,0.)); +#492587 = ORIENTED_EDGE('',*,*,#492588,.T.); +#492588 = EDGE_CURVE('',#492581,#492589,#492591,.T.); +#492589 = VERTEX_POINT('',#492590); +#492590 = CARTESIAN_POINT('',(146.,-79.44,1.56)); +#492591 = LINE('',#492592,#492593); +#492592 = CARTESIAN_POINT('',(147.5,-79.44,1.56)); +#492593 = VECTOR('',#492594,1.); +#492594 = DIRECTION('',(-1.,0.,0.)); +#492595 = ORIENTED_EDGE('',*,*,#492596,.T.); +#492596 = EDGE_CURVE('',#492589,#492597,#492599,.T.); +#492597 = VERTEX_POINT('',#492598); +#492598 = CARTESIAN_POINT('',(146.,-80.34,1.56)); +#492599 = LINE('',#492600,#492601); +#492600 = CARTESIAN_POINT('',(146.,-79.44,1.56)); +#492601 = VECTOR('',#492602,1.); +#492602 = DIRECTION('',(0.,-1.,0.)); +#492603 = ORIENTED_EDGE('',*,*,#492604,.T.); +#492604 = EDGE_CURVE('',#492597,#492579,#492605,.T.); +#492605 = LINE('',#492606,#492607); +#492606 = CARTESIAN_POINT('',(146.,-80.34,1.56)); +#492607 = VECTOR('',#492608,1.); +#492608 = DIRECTION('',(1.,0.,0.)); +#492609 = FACE_BOUND('',#492610,.F.); +#492610 = EDGE_LOOP('',(#492611,#492622,#492630,#492639,#492647,#492656, + #492664,#492673)); +#492611 = ORIENTED_EDGE('',*,*,#492612,.T.); +#492612 = EDGE_CURVE('',#492613,#492615,#492617,.T.); +#492613 = VERTEX_POINT('',#492614); +#492614 = CARTESIAN_POINT('',(121.9,-78.275,1.56)); +#492615 = VERTEX_POINT('',#492616); +#492616 = CARTESIAN_POINT('',(121.65,-78.025,1.56)); +#492617 = CIRCLE('',#492618,0.249998959685); +#492618 = AXIS2_PLACEMENT_3D('',#492619,#492620,#492621); +#492619 = CARTESIAN_POINT('',(121.65000104031,-78.27499895968,1.56)); +#492620 = DIRECTION('',(0.,0.,1.)); +#492621 = DIRECTION('',(0.999999999991,-4.16128589391E-06,0.)); +#492622 = ORIENTED_EDGE('',*,*,#492623,.T.); +#492623 = EDGE_CURVE('',#492615,#492624,#492626,.T.); +#492624 = VERTEX_POINT('',#492625); +#492625 = CARTESIAN_POINT('',(120.95,-78.025,1.56)); +#492626 = LINE('',#492627,#492628); +#492627 = CARTESIAN_POINT('',(121.65,-78.025,1.56)); +#492628 = VECTOR('',#492629,1.); +#492629 = DIRECTION('',(-1.,0.,0.)); +#492630 = ORIENTED_EDGE('',*,*,#492631,.T.); +#492631 = EDGE_CURVE('',#492624,#492632,#492634,.T.); +#492632 = VERTEX_POINT('',#492633); +#492633 = CARTESIAN_POINT('',(120.7,-78.275,1.56)); +#492634 = CIRCLE('',#492635,0.249998959685); +#492635 = AXIS2_PLACEMENT_3D('',#492636,#492637,#492638); +#492636 = CARTESIAN_POINT('',(120.94999895968,-78.27499895968,1.56)); +#492637 = DIRECTION('',(0.,0.,1.)); +#492638 = DIRECTION('',(4.161285837067E-06,0.999999999991,-0.)); +#492639 = ORIENTED_EDGE('',*,*,#492640,.T.); +#492640 = EDGE_CURVE('',#492632,#492641,#492643,.T.); +#492641 = VERTEX_POINT('',#492642); +#492642 = CARTESIAN_POINT('',(120.7,-79.575,1.56)); +#492643 = LINE('',#492644,#492645); +#492644 = CARTESIAN_POINT('',(120.7,-78.275,1.56)); +#492645 = VECTOR('',#492646,1.); +#492646 = DIRECTION('',(0.,-1.,0.)); +#492647 = ORIENTED_EDGE('',*,*,#492648,.T.); +#492648 = EDGE_CURVE('',#492641,#492649,#492651,.T.); +#492649 = VERTEX_POINT('',#492650); +#492650 = CARTESIAN_POINT('',(120.95,-79.825,1.56)); +#492651 = CIRCLE('',#492652,0.249998959685); +#492652 = AXIS2_PLACEMENT_3D('',#492653,#492654,#492655); +#492653 = CARTESIAN_POINT('',(120.94999895968,-79.57500104031,1.56)); +#492654 = DIRECTION('',(0.,0.,1.)); +#492655 = DIRECTION('',(-0.999999999991,4.161285837066E-06,0.)); +#492656 = ORIENTED_EDGE('',*,*,#492657,.T.); +#492657 = EDGE_CURVE('',#492649,#492658,#492660,.T.); +#492658 = VERTEX_POINT('',#492659); +#492659 = CARTESIAN_POINT('',(121.65,-79.825,1.56)); +#492660 = LINE('',#492661,#492662); +#492661 = CARTESIAN_POINT('',(120.95,-79.825,1.56)); +#492662 = VECTOR('',#492663,1.); +#492663 = DIRECTION('',(1.,0.,0.)); +#492664 = ORIENTED_EDGE('',*,*,#492665,.T.); +#492665 = EDGE_CURVE('',#492658,#492666,#492668,.T.); +#492666 = VERTEX_POINT('',#492667); +#492667 = CARTESIAN_POINT('',(121.9,-79.575,1.56)); +#492668 = CIRCLE('',#492669,0.249998959685); +#492669 = AXIS2_PLACEMENT_3D('',#492670,#492671,#492672); +#492670 = CARTESIAN_POINT('',(121.65000104031,-79.57500104031,1.56)); +#492671 = DIRECTION('',(0.,0.,1.)); +#492672 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#492673 = ORIENTED_EDGE('',*,*,#492674,.T.); +#492674 = EDGE_CURVE('',#492666,#492613,#492675,.T.); +#492675 = LINE('',#492676,#492677); +#492676 = CARTESIAN_POINT('',(121.9,-79.575,1.56)); +#492677 = VECTOR('',#492678,1.); +#492678 = DIRECTION('',(0.,1.,0.)); +#492679 = FACE_BOUND('',#492680,.F.); +#492680 = EDGE_LOOP('',(#492681,#492692,#492700,#492709,#492717,#492726, + #492734,#492743)); +#492681 = ORIENTED_EDGE('',*,*,#492682,.T.); +#492682 = EDGE_CURVE('',#492683,#492685,#492687,.T.); +#492683 = VERTEX_POINT('',#492684); +#492684 = CARTESIAN_POINT('',(127.5,-78.275,1.56)); +#492685 = VERTEX_POINT('',#492686); +#492686 = CARTESIAN_POINT('',(127.25,-78.025,1.56)); +#492687 = CIRCLE('',#492688,0.249998959685); +#492688 = AXIS2_PLACEMENT_3D('',#492689,#492690,#492691); +#492689 = CARTESIAN_POINT('',(127.25000104031,-78.27499895968,1.56)); +#492690 = DIRECTION('',(0.,0.,1.)); +#492691 = DIRECTION('',(0.999999999991,-4.16128589391E-06,0.)); +#492692 = ORIENTED_EDGE('',*,*,#492693,.T.); +#492693 = EDGE_CURVE('',#492685,#492694,#492696,.T.); +#492694 = VERTEX_POINT('',#492695); +#492695 = CARTESIAN_POINT('',(126.55,-78.025,1.56)); +#492696 = LINE('',#492697,#492698); +#492697 = CARTESIAN_POINT('',(127.25,-78.025,1.56)); +#492698 = VECTOR('',#492699,1.); +#492699 = DIRECTION('',(-1.,0.,0.)); +#492700 = ORIENTED_EDGE('',*,*,#492701,.T.); +#492701 = EDGE_CURVE('',#492694,#492702,#492704,.T.); +#492702 = VERTEX_POINT('',#492703); +#492703 = CARTESIAN_POINT('',(126.3,-78.275,1.56)); +#492704 = CIRCLE('',#492705,0.249998959685); +#492705 = AXIS2_PLACEMENT_3D('',#492706,#492707,#492708); +#492706 = CARTESIAN_POINT('',(126.54999895968,-78.27499895968,1.56)); +#492707 = DIRECTION('',(0.,0.,1.)); +#492708 = DIRECTION('',(4.161285837067E-06,0.999999999991,-0.)); +#492709 = ORIENTED_EDGE('',*,*,#492710,.T.); +#492710 = EDGE_CURVE('',#492702,#492711,#492713,.T.); +#492711 = VERTEX_POINT('',#492712); +#492712 = CARTESIAN_POINT('',(126.3,-79.575,1.56)); +#492713 = LINE('',#492714,#492715); +#492714 = CARTESIAN_POINT('',(126.3,-78.275,1.56)); +#492715 = VECTOR('',#492716,1.); +#492716 = DIRECTION('',(0.,-1.,0.)); +#492717 = ORIENTED_EDGE('',*,*,#492718,.T.); +#492718 = EDGE_CURVE('',#492711,#492719,#492721,.T.); +#492719 = VERTEX_POINT('',#492720); +#492720 = CARTESIAN_POINT('',(126.55,-79.825,1.56)); +#492721 = CIRCLE('',#492722,0.249998959685); +#492722 = AXIS2_PLACEMENT_3D('',#492723,#492724,#492725); +#492723 = CARTESIAN_POINT('',(126.54999895968,-79.57500104031,1.56)); +#492724 = DIRECTION('',(0.,0.,1.)); +#492725 = DIRECTION('',(-0.999999999991,4.161285837066E-06,0.)); +#492726 = ORIENTED_EDGE('',*,*,#492727,.T.); +#492727 = EDGE_CURVE('',#492719,#492728,#492730,.T.); +#492728 = VERTEX_POINT('',#492729); +#492729 = CARTESIAN_POINT('',(127.25,-79.825,1.56)); +#492730 = LINE('',#492731,#492732); +#492731 = CARTESIAN_POINT('',(126.55,-79.825,1.56)); +#492732 = VECTOR('',#492733,1.); +#492733 = DIRECTION('',(1.,0.,0.)); +#492734 = ORIENTED_EDGE('',*,*,#492735,.T.); +#492735 = EDGE_CURVE('',#492728,#492736,#492738,.T.); +#492736 = VERTEX_POINT('',#492737); +#492737 = CARTESIAN_POINT('',(127.5,-79.575,1.56)); +#492738 = CIRCLE('',#492739,0.249998959685); +#492739 = AXIS2_PLACEMENT_3D('',#492740,#492741,#492742); +#492740 = CARTESIAN_POINT('',(127.25000104031,-79.57500104031,1.56)); +#492741 = DIRECTION('',(0.,0.,1.)); +#492742 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#492743 = ORIENTED_EDGE('',*,*,#492744,.T.); +#492744 = EDGE_CURVE('',#492736,#492683,#492745,.T.); +#492745 = LINE('',#492746,#492747); +#492746 = CARTESIAN_POINT('',(127.5,-79.575,1.56)); +#492747 = VECTOR('',#492748,1.); +#492748 = DIRECTION('',(0.,1.,0.)); +#492749 = FACE_BOUND('',#492750,.F.); +#492750 = EDGE_LOOP('',(#492751,#492761,#492769,#492777)); +#492751 = ORIENTED_EDGE('',*,*,#492752,.T.); +#492752 = EDGE_CURVE('',#492753,#492755,#492757,.T.); +#492753 = VERTEX_POINT('',#492754); +#492754 = CARTESIAN_POINT('',(130.,-79.07,1.56)); +#492755 = VERTEX_POINT('',#492756); +#492756 = CARTESIAN_POINT('',(130.,-78.17,1.56)); +#492757 = LINE('',#492758,#492759); +#492758 = CARTESIAN_POINT('',(130.,-79.07,1.56)); +#492759 = VECTOR('',#492760,1.); +#492760 = DIRECTION('',(0.,1.,0.)); +#492761 = ORIENTED_EDGE('',*,*,#492762,.T.); +#492762 = EDGE_CURVE('',#492755,#492763,#492765,.T.); +#492763 = VERTEX_POINT('',#492764); +#492764 = CARTESIAN_POINT('',(128.5,-78.17,1.56)); +#492765 = LINE('',#492766,#492767); +#492766 = CARTESIAN_POINT('',(130.,-78.17,1.56)); +#492767 = VECTOR('',#492768,1.); +#492768 = DIRECTION('',(-1.,0.,0.)); +#492769 = ORIENTED_EDGE('',*,*,#492770,.T.); +#492770 = EDGE_CURVE('',#492763,#492771,#492773,.T.); +#492771 = VERTEX_POINT('',#492772); +#492772 = CARTESIAN_POINT('',(128.5,-79.07,1.56)); +#492773 = LINE('',#492774,#492775); +#492774 = CARTESIAN_POINT('',(128.5,-78.17,1.56)); +#492775 = VECTOR('',#492776,1.); +#492776 = DIRECTION('',(0.,-1.,0.)); +#492777 = ORIENTED_EDGE('',*,*,#492778,.T.); +#492778 = EDGE_CURVE('',#492771,#492753,#492779,.T.); +#492779 = LINE('',#492780,#492781); +#492780 = CARTESIAN_POINT('',(128.5,-79.07,1.56)); +#492781 = VECTOR('',#492782,1.); +#492782 = DIRECTION('',(1.,0.,0.)); +#492783 = FACE_BOUND('',#492784,.F.); +#492784 = EDGE_LOOP('',(#492785,#492795,#492803,#492811)); +#492785 = ORIENTED_EDGE('',*,*,#492786,.T.); +#492786 = EDGE_CURVE('',#492787,#492789,#492791,.T.); +#492787 = VERTEX_POINT('',#492788); +#492788 = CARTESIAN_POINT('',(147.5,-79.07,1.56)); +#492789 = VERTEX_POINT('',#492790); +#492790 = CARTESIAN_POINT('',(147.5,-78.17,1.56)); +#492791 = LINE('',#492792,#492793); +#492792 = CARTESIAN_POINT('',(147.5,-79.07,1.56)); +#492793 = VECTOR('',#492794,1.); +#492794 = DIRECTION('',(0.,1.,0.)); +#492795 = ORIENTED_EDGE('',*,*,#492796,.T.); +#492796 = EDGE_CURVE('',#492789,#492797,#492799,.T.); +#492797 = VERTEX_POINT('',#492798); +#492798 = CARTESIAN_POINT('',(146.,-78.17,1.56)); +#492799 = LINE('',#492800,#492801); +#492800 = CARTESIAN_POINT('',(147.5,-78.17,1.56)); +#492801 = VECTOR('',#492802,1.); +#492802 = DIRECTION('',(-1.,0.,0.)); +#492803 = ORIENTED_EDGE('',*,*,#492804,.T.); +#492804 = EDGE_CURVE('',#492797,#492805,#492807,.T.); +#492805 = VERTEX_POINT('',#492806); +#492806 = CARTESIAN_POINT('',(146.,-79.07,1.56)); +#492807 = LINE('',#492808,#492809); +#492808 = CARTESIAN_POINT('',(146.,-78.17,1.56)); +#492809 = VECTOR('',#492810,1.); +#492810 = DIRECTION('',(0.,-1.,0.)); +#492811 = ORIENTED_EDGE('',*,*,#492812,.T.); +#492812 = EDGE_CURVE('',#492805,#492787,#492813,.T.); +#492813 = LINE('',#492814,#492815); +#492814 = CARTESIAN_POINT('',(146.,-79.07,1.56)); +#492815 = VECTOR('',#492816,1.); +#492816 = DIRECTION('',(1.,0.,0.)); +#492817 = FACE_BOUND('',#492818,.F.); +#492818 = EDGE_LOOP('',(#492819,#492830,#492838,#492847,#492855,#492864, + #492872,#492881)); +#492819 = ORIENTED_EDGE('',*,*,#492820,.T.); +#492820 = EDGE_CURVE('',#492821,#492823,#492825,.T.); +#492821 = VERTEX_POINT('',#492822); +#492822 = CARTESIAN_POINT('',(153.1,-76.875,1.56)); +#492823 = VERTEX_POINT('',#492824); +#492824 = CARTESIAN_POINT('',(152.85,-76.625,1.56)); +#492825 = CIRCLE('',#492826,0.249998959685); +#492826 = AXIS2_PLACEMENT_3D('',#492827,#492828,#492829); +#492827 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,1.56)); +#492828 = DIRECTION('',(0.,0.,1.)); +#492829 = DIRECTION('',(0.999999999991,-4.161285950754E-06,0.)); +#492830 = ORIENTED_EDGE('',*,*,#492831,.T.); +#492831 = EDGE_CURVE('',#492823,#492832,#492834,.T.); +#492832 = VERTEX_POINT('',#492833); +#492833 = CARTESIAN_POINT('',(152.15,-76.625,1.56)); +#492834 = LINE('',#492835,#492836); +#492835 = CARTESIAN_POINT('',(152.85,-76.625,1.56)); +#492836 = VECTOR('',#492837,1.); +#492837 = DIRECTION('',(-1.,0.,0.)); +#492838 = ORIENTED_EDGE('',*,*,#492839,.T.); +#492839 = EDGE_CURVE('',#492832,#492840,#492842,.T.); +#492840 = VERTEX_POINT('',#492841); +#492841 = CARTESIAN_POINT('',(151.9,-76.875,1.56)); +#492842 = CIRCLE('',#492843,0.249998959685); +#492843 = AXIS2_PLACEMENT_3D('',#492844,#492845,#492846); +#492844 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,1.56)); +#492845 = DIRECTION('',(0.,0.,1.)); +#492846 = DIRECTION('',(4.161285950754E-06,0.999999999991,-0.)); +#492847 = ORIENTED_EDGE('',*,*,#492848,.T.); +#492848 = EDGE_CURVE('',#492840,#492849,#492851,.T.); +#492849 = VERTEX_POINT('',#492850); +#492850 = CARTESIAN_POINT('',(151.9,-78.125,1.56)); +#492851 = LINE('',#492852,#492853); +#492852 = CARTESIAN_POINT('',(151.9,-76.875,1.56)); +#492853 = VECTOR('',#492854,1.); +#492854 = DIRECTION('',(0.,-1.,0.)); +#492855 = ORIENTED_EDGE('',*,*,#492856,.T.); +#492856 = EDGE_CURVE('',#492849,#492857,#492859,.T.); +#492857 = VERTEX_POINT('',#492858); +#492858 = CARTESIAN_POINT('',(152.15,-78.375,1.56)); +#492859 = CIRCLE('',#492860,0.249998959685); +#492860 = AXIS2_PLACEMENT_3D('',#492861,#492862,#492863); +#492861 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,1.56)); +#492862 = DIRECTION('',(0.,0.,1.)); +#492863 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#492864 = ORIENTED_EDGE('',*,*,#492865,.T.); +#492865 = EDGE_CURVE('',#492857,#492866,#492868,.T.); +#492866 = VERTEX_POINT('',#492867); +#492867 = CARTESIAN_POINT('',(152.85,-78.375,1.56)); +#492868 = LINE('',#492869,#492870); +#492869 = CARTESIAN_POINT('',(152.15,-78.375,1.56)); +#492870 = VECTOR('',#492871,1.); +#492871 = DIRECTION('',(1.,0.,0.)); +#492872 = ORIENTED_EDGE('',*,*,#492873,.T.); +#492873 = EDGE_CURVE('',#492866,#492874,#492876,.T.); +#492874 = VERTEX_POINT('',#492875); +#492875 = CARTESIAN_POINT('',(153.1,-78.125,1.56)); +#492876 = CIRCLE('',#492877,0.249998959685); +#492877 = AXIS2_PLACEMENT_3D('',#492878,#492879,#492880); +#492878 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,1.56)); +#492879 = DIRECTION('',(0.,0.,1.)); +#492880 = DIRECTION('',(-4.161285950754E-06,-0.999999999991,0.)); +#492881 = ORIENTED_EDGE('',*,*,#492882,.T.); +#492882 = EDGE_CURVE('',#492874,#492821,#492883,.T.); +#492883 = LINE('',#492884,#492885); +#492884 = CARTESIAN_POINT('',(153.1,-78.125,1.56)); +#492885 = VECTOR('',#492886,1.); +#492886 = DIRECTION('',(0.,1.,0.)); +#492887 = FACE_BOUND('',#492888,.F.); +#492888 = EDGE_LOOP('',(#492889,#492900,#492908,#492917)); +#492889 = ORIENTED_EDGE('',*,*,#492890,.T.); +#492890 = EDGE_CURVE('',#492891,#492893,#492895,.T.); +#492891 = VERTEX_POINT('',#492892); +#492892 = CARTESIAN_POINT('',(149.9,-77.775,1.56)); +#492893 = VERTEX_POINT('',#492894); +#492894 = CARTESIAN_POINT('',(151.1,-77.775,1.56)); +#492895 = CIRCLE('',#492896,0.6); +#492896 = AXIS2_PLACEMENT_3D('',#492897,#492898,#492899); +#492897 = CARTESIAN_POINT('',(150.5,-77.77500012065,1.56)); +#492898 = DIRECTION('',(0.,0.,1.)); +#492899 = DIRECTION('',(-1.,2.010883548564E-07,-0.)); +#492900 = ORIENTED_EDGE('',*,*,#492901,.T.); +#492901 = EDGE_CURVE('',#492893,#492902,#492904,.T.); +#492902 = VERTEX_POINT('',#492903); +#492903 = CARTESIAN_POINT('',(151.1,-77.225,1.56)); +#492904 = LINE('',#492905,#492906); +#492905 = CARTESIAN_POINT('',(151.1,-77.775,1.56)); +#492906 = VECTOR('',#492907,1.); +#492907 = DIRECTION('',(0.,1.,0.)); +#492908 = ORIENTED_EDGE('',*,*,#492909,.T.); +#492909 = EDGE_CURVE('',#492902,#492910,#492912,.T.); +#492910 = VERTEX_POINT('',#492911); +#492911 = CARTESIAN_POINT('',(149.9,-77.225,1.56)); +#492912 = CIRCLE('',#492913,0.6); +#492913 = AXIS2_PLACEMENT_3D('',#492914,#492915,#492916); +#492914 = CARTESIAN_POINT('',(150.5,-77.22499938224,1.56)); +#492915 = DIRECTION('',(0.,0.,1.)); +#492916 = DIRECTION('',(0.999999999999,-1.029586395399E-06,0.)); +#492917 = ORIENTED_EDGE('',*,*,#492918,.T.); +#492918 = EDGE_CURVE('',#492910,#492891,#492919,.T.); +#492919 = LINE('',#492920,#492921); +#492920 = CARTESIAN_POINT('',(149.9,-77.225,1.56)); +#492921 = VECTOR('',#492922,1.); +#492922 = DIRECTION('',(0.,-1.,0.)); +#492923 = FACE_BOUND('',#492924,.F.); +#492924 = EDGE_LOOP('',(#492925,#492935,#492943,#492951)); +#492925 = ORIENTED_EDGE('',*,*,#492926,.T.); +#492926 = EDGE_CURVE('',#492927,#492929,#492931,.T.); +#492927 = VERTEX_POINT('',#492928); +#492928 = CARTESIAN_POINT('',(130.,-77.8,1.56)); +#492929 = VERTEX_POINT('',#492930); +#492930 = CARTESIAN_POINT('',(130.,-76.9,1.56)); +#492931 = LINE('',#492932,#492933); +#492932 = CARTESIAN_POINT('',(130.,-77.8,1.56)); +#492933 = VECTOR('',#492934,1.); +#492934 = DIRECTION('',(0.,1.,0.)); +#492935 = ORIENTED_EDGE('',*,*,#492936,.T.); +#492936 = EDGE_CURVE('',#492929,#492937,#492939,.T.); +#492937 = VERTEX_POINT('',#492938); +#492938 = CARTESIAN_POINT('',(128.5,-76.9,1.56)); +#492939 = LINE('',#492940,#492941); +#492940 = CARTESIAN_POINT('',(130.,-76.9,1.56)); +#492941 = VECTOR('',#492942,1.); +#492942 = DIRECTION('',(-1.,0.,0.)); +#492943 = ORIENTED_EDGE('',*,*,#492944,.T.); +#492944 = EDGE_CURVE('',#492937,#492945,#492947,.T.); +#492945 = VERTEX_POINT('',#492946); +#492946 = CARTESIAN_POINT('',(128.5,-77.8,1.56)); +#492947 = LINE('',#492948,#492949); +#492948 = CARTESIAN_POINT('',(128.5,-76.9,1.56)); +#492949 = VECTOR('',#492950,1.); +#492950 = DIRECTION('',(0.,-1.,0.)); +#492951 = ORIENTED_EDGE('',*,*,#492952,.T.); +#492952 = EDGE_CURVE('',#492945,#492927,#492953,.T.); +#492953 = LINE('',#492954,#492955); +#492954 = CARTESIAN_POINT('',(128.5,-77.8,1.56)); +#492955 = VECTOR('',#492956,1.); +#492956 = DIRECTION('',(1.,0.,0.)); +#492957 = FACE_BOUND('',#492958,.F.); +#492958 = EDGE_LOOP('',(#492959,#492969,#492977,#492985)); +#492959 = ORIENTED_EDGE('',*,*,#492960,.T.); +#492960 = EDGE_CURVE('',#492961,#492963,#492965,.T.); +#492961 = VERTEX_POINT('',#492962); +#492962 = CARTESIAN_POINT('',(147.5,-77.8,1.56)); +#492963 = VERTEX_POINT('',#492964); +#492964 = CARTESIAN_POINT('',(147.5,-76.9,1.56)); +#492965 = LINE('',#492966,#492967); +#492966 = CARTESIAN_POINT('',(147.5,-77.8,1.56)); +#492967 = VECTOR('',#492968,1.); +#492968 = DIRECTION('',(0.,1.,0.)); +#492969 = ORIENTED_EDGE('',*,*,#492970,.T.); +#492970 = EDGE_CURVE('',#492963,#492971,#492973,.T.); +#492971 = VERTEX_POINT('',#492972); +#492972 = CARTESIAN_POINT('',(146.,-76.9,1.56)); +#492973 = LINE('',#492974,#492975); +#492974 = CARTESIAN_POINT('',(147.5,-76.9,1.56)); +#492975 = VECTOR('',#492976,1.); +#492976 = DIRECTION('',(-1.,0.,0.)); +#492977 = ORIENTED_EDGE('',*,*,#492978,.T.); +#492978 = EDGE_CURVE('',#492971,#492979,#492981,.T.); +#492979 = VERTEX_POINT('',#492980); +#492980 = CARTESIAN_POINT('',(146.,-77.8,1.56)); +#492981 = LINE('',#492982,#492983); +#492982 = CARTESIAN_POINT('',(146.,-76.9,1.56)); +#492983 = VECTOR('',#492984,1.); +#492984 = DIRECTION('',(0.,-1.,0.)); +#492985 = ORIENTED_EDGE('',*,*,#492986,.T.); +#492986 = EDGE_CURVE('',#492979,#492961,#492987,.T.); +#492987 = LINE('',#492988,#492989); +#492988 = CARTESIAN_POINT('',(146.,-77.8,1.56)); +#492989 = VECTOR('',#492990,1.); +#492990 = DIRECTION('',(1.,0.,0.)); +#492991 = FACE_BOUND('',#492992,.F.); +#492992 = EDGE_LOOP('',(#492993,#493003,#493011,#493019)); +#492993 = ORIENTED_EDGE('',*,*,#492994,.T.); +#492994 = EDGE_CURVE('',#492995,#492997,#492999,.T.); +#492995 = VERTEX_POINT('',#492996); +#492996 = CARTESIAN_POINT('',(130.,-76.53,1.56)); +#492997 = VERTEX_POINT('',#492998); +#492998 = CARTESIAN_POINT('',(130.,-75.63,1.56)); +#492999 = LINE('',#493000,#493001); +#493000 = CARTESIAN_POINT('',(130.,-76.53,1.56)); +#493001 = VECTOR('',#493002,1.); +#493002 = DIRECTION('',(0.,1.,0.)); +#493003 = ORIENTED_EDGE('',*,*,#493004,.T.); +#493004 = EDGE_CURVE('',#492997,#493005,#493007,.T.); +#493005 = VERTEX_POINT('',#493006); +#493006 = CARTESIAN_POINT('',(128.5,-75.63,1.56)); +#493007 = LINE('',#493008,#493009); +#493008 = CARTESIAN_POINT('',(130.,-75.63,1.56)); +#493009 = VECTOR('',#493010,1.); +#493010 = DIRECTION('',(-1.,0.,0.)); +#493011 = ORIENTED_EDGE('',*,*,#493012,.T.); +#493012 = EDGE_CURVE('',#493005,#493013,#493015,.T.); +#493013 = VERTEX_POINT('',#493014); +#493014 = CARTESIAN_POINT('',(128.5,-76.53,1.56)); +#493015 = LINE('',#493016,#493017); +#493016 = CARTESIAN_POINT('',(128.5,-75.63,1.56)); +#493017 = VECTOR('',#493018,1.); +#493018 = DIRECTION('',(0.,-1.,0.)); +#493019 = ORIENTED_EDGE('',*,*,#493020,.T.); +#493020 = EDGE_CURVE('',#493013,#492995,#493021,.T.); +#493021 = LINE('',#493022,#493023); +#493022 = CARTESIAN_POINT('',(128.5,-76.53,1.56)); +#493023 = VECTOR('',#493024,1.); +#493024 = DIRECTION('',(1.,0.,0.)); +#493025 = FACE_BOUND('',#493026,.F.); +#493026 = EDGE_LOOP('',(#493027,#493037,#493045,#493053)); +#493027 = ORIENTED_EDGE('',*,*,#493028,.T.); +#493028 = EDGE_CURVE('',#493029,#493031,#493033,.T.); +#493029 = VERTEX_POINT('',#493030); +#493030 = CARTESIAN_POINT('',(147.5,-76.53,1.56)); +#493031 = VERTEX_POINT('',#493032); +#493032 = CARTESIAN_POINT('',(147.5,-75.63,1.56)); +#493033 = LINE('',#493034,#493035); +#493034 = CARTESIAN_POINT('',(147.5,-76.53,1.56)); +#493035 = VECTOR('',#493036,1.); +#493036 = DIRECTION('',(0.,1.,0.)); +#493037 = ORIENTED_EDGE('',*,*,#493038,.T.); +#493038 = EDGE_CURVE('',#493031,#493039,#493041,.T.); +#493039 = VERTEX_POINT('',#493040); +#493040 = CARTESIAN_POINT('',(146.,-75.63,1.56)); +#493041 = LINE('',#493042,#493043); +#493042 = CARTESIAN_POINT('',(147.5,-75.63,1.56)); +#493043 = VECTOR('',#493044,1.); +#493044 = DIRECTION('',(-1.,0.,0.)); +#493045 = ORIENTED_EDGE('',*,*,#493046,.T.); +#493046 = EDGE_CURVE('',#493039,#493047,#493049,.T.); +#493047 = VERTEX_POINT('',#493048); +#493048 = CARTESIAN_POINT('',(146.,-76.53,1.56)); +#493049 = LINE('',#493050,#493051); +#493050 = CARTESIAN_POINT('',(146.,-75.63,1.56)); +#493051 = VECTOR('',#493052,1.); +#493052 = DIRECTION('',(0.,-1.,0.)); +#493053 = ORIENTED_EDGE('',*,*,#493054,.T.); +#493054 = EDGE_CURVE('',#493047,#493029,#493055,.T.); +#493055 = LINE('',#493056,#493057); +#493056 = CARTESIAN_POINT('',(146.,-76.53,1.56)); +#493057 = VECTOR('',#493058,1.); +#493058 = DIRECTION('',(1.,0.,0.)); +#493059 = FACE_BOUND('',#493060,.F.); +#493060 = EDGE_LOOP('',(#493061,#493071,#493079,#493087)); +#493061 = ORIENTED_EDGE('',*,*,#493062,.T.); +#493062 = EDGE_CURVE('',#493063,#493065,#493067,.T.); +#493063 = VERTEX_POINT('',#493064); +#493064 = CARTESIAN_POINT('',(130.,-75.26,1.56)); +#493065 = VERTEX_POINT('',#493066); +#493066 = CARTESIAN_POINT('',(130.,-74.36,1.56)); +#493067 = LINE('',#493068,#493069); +#493068 = CARTESIAN_POINT('',(130.,-75.26,1.56)); +#493069 = VECTOR('',#493070,1.); +#493070 = DIRECTION('',(0.,1.,0.)); +#493071 = ORIENTED_EDGE('',*,*,#493072,.T.); +#493072 = EDGE_CURVE('',#493065,#493073,#493075,.T.); +#493073 = VERTEX_POINT('',#493074); +#493074 = CARTESIAN_POINT('',(128.5,-74.36,1.56)); +#493075 = LINE('',#493076,#493077); +#493076 = CARTESIAN_POINT('',(130.,-74.36,1.56)); +#493077 = VECTOR('',#493078,1.); +#493078 = DIRECTION('',(-1.,0.,0.)); +#493079 = ORIENTED_EDGE('',*,*,#493080,.T.); +#493080 = EDGE_CURVE('',#493073,#493081,#493083,.T.); +#493081 = VERTEX_POINT('',#493082); +#493082 = CARTESIAN_POINT('',(128.5,-75.26,1.56)); +#493083 = LINE('',#493084,#493085); +#493084 = CARTESIAN_POINT('',(128.5,-74.36,1.56)); +#493085 = VECTOR('',#493086,1.); +#493086 = DIRECTION('',(0.,-1.,0.)); +#493087 = ORIENTED_EDGE('',*,*,#493088,.T.); +#493088 = EDGE_CURVE('',#493081,#493063,#493089,.T.); +#493089 = LINE('',#493090,#493091); +#493090 = CARTESIAN_POINT('',(128.5,-75.26,1.56)); +#493091 = VECTOR('',#493092,1.); +#493092 = DIRECTION('',(1.,0.,0.)); +#493093 = FACE_BOUND('',#493094,.F.); +#493094 = EDGE_LOOP('',(#493095,#493105,#493113,#493121)); +#493095 = ORIENTED_EDGE('',*,*,#493096,.T.); +#493096 = EDGE_CURVE('',#493097,#493099,#493101,.T.); +#493097 = VERTEX_POINT('',#493098); +#493098 = CARTESIAN_POINT('',(147.5,-75.26,1.56)); +#493099 = VERTEX_POINT('',#493100); +#493100 = CARTESIAN_POINT('',(147.5,-74.36,1.56)); +#493101 = LINE('',#493102,#493103); +#493102 = CARTESIAN_POINT('',(147.5,-75.26,1.56)); +#493103 = VECTOR('',#493104,1.); +#493104 = DIRECTION('',(0.,1.,0.)); +#493105 = ORIENTED_EDGE('',*,*,#493106,.T.); +#493106 = EDGE_CURVE('',#493099,#493107,#493109,.T.); +#493107 = VERTEX_POINT('',#493108); +#493108 = CARTESIAN_POINT('',(146.,-74.36,1.56)); +#493109 = LINE('',#493110,#493111); +#493110 = CARTESIAN_POINT('',(147.5,-74.36,1.56)); +#493111 = VECTOR('',#493112,1.); +#493112 = DIRECTION('',(-1.,0.,0.)); +#493113 = ORIENTED_EDGE('',*,*,#493114,.T.); +#493114 = EDGE_CURVE('',#493107,#493115,#493117,.T.); +#493115 = VERTEX_POINT('',#493116); +#493116 = CARTESIAN_POINT('',(146.,-75.26,1.56)); +#493117 = LINE('',#493118,#493119); +#493118 = CARTESIAN_POINT('',(146.,-74.36,1.56)); +#493119 = VECTOR('',#493120,1.); +#493120 = DIRECTION('',(0.,-1.,0.)); +#493121 = ORIENTED_EDGE('',*,*,#493122,.T.); +#493122 = EDGE_CURVE('',#493115,#493097,#493123,.T.); +#493123 = LINE('',#493124,#493125); +#493124 = CARTESIAN_POINT('',(146.,-75.26,1.56)); +#493125 = VECTOR('',#493126,1.); +#493126 = DIRECTION('',(1.,0.,0.)); +#493127 = FACE_BOUND('',#493128,.F.); +#493128 = EDGE_LOOP('',(#493129,#493139,#493147,#493155)); +#493129 = ORIENTED_EDGE('',*,*,#493130,.T.); +#493130 = EDGE_CURVE('',#493131,#493133,#493135,.T.); +#493131 = VERTEX_POINT('',#493132); +#493132 = CARTESIAN_POINT('',(135.55,-74.22,1.56)); +#493133 = VERTEX_POINT('',#493134); +#493134 = CARTESIAN_POINT('',(135.55,-73.32,1.56)); +#493135 = LINE('',#493136,#493137); +#493136 = CARTESIAN_POINT('',(135.55,-74.22,1.56)); +#493137 = VECTOR('',#493138,1.); +#493138 = DIRECTION('',(0.,1.,0.)); +#493139 = ORIENTED_EDGE('',*,*,#493140,.T.); +#493140 = EDGE_CURVE('',#493133,#493141,#493143,.T.); +#493141 = VERTEX_POINT('',#493142); +#493142 = CARTESIAN_POINT('',(134.65,-73.32,1.56)); +#493143 = LINE('',#493144,#493145); +#493144 = CARTESIAN_POINT('',(135.55,-73.32,1.56)); +#493145 = VECTOR('',#493146,1.); +#493146 = DIRECTION('',(-1.,0.,0.)); +#493147 = ORIENTED_EDGE('',*,*,#493148,.T.); +#493148 = EDGE_CURVE('',#493141,#493149,#493151,.T.); +#493149 = VERTEX_POINT('',#493150); +#493150 = CARTESIAN_POINT('',(134.65,-74.22,1.56)); +#493151 = LINE('',#493152,#493153); +#493152 = CARTESIAN_POINT('',(134.65,-73.32,1.56)); +#493153 = VECTOR('',#493154,1.); +#493154 = DIRECTION('',(0.,-1.,0.)); +#493155 = ORIENTED_EDGE('',*,*,#493156,.T.); +#493156 = EDGE_CURVE('',#493149,#493131,#493157,.T.); +#493157 = LINE('',#493158,#493159); +#493158 = CARTESIAN_POINT('',(134.65,-74.22,1.56)); +#493159 = VECTOR('',#493160,1.); +#493160 = DIRECTION('',(1.,0.,0.)); +#493161 = FACE_BOUND('',#493162,.F.); +#493162 = EDGE_LOOP('',(#493163,#493173,#493181,#493189)); +#493163 = ORIENTED_EDGE('',*,*,#493164,.T.); +#493164 = EDGE_CURVE('',#493165,#493167,#493169,.T.); +#493165 = VERTEX_POINT('',#493166); +#493166 = CARTESIAN_POINT('',(136.95,-74.22,1.56)); +#493167 = VERTEX_POINT('',#493168); +#493168 = CARTESIAN_POINT('',(136.95,-73.32,1.56)); +#493169 = LINE('',#493170,#493171); +#493170 = CARTESIAN_POINT('',(136.95,-74.22,1.56)); +#493171 = VECTOR('',#493172,1.); +#493172 = DIRECTION('',(0.,1.,0.)); +#493173 = ORIENTED_EDGE('',*,*,#493174,.T.); +#493174 = EDGE_CURVE('',#493167,#493175,#493177,.T.); +#493175 = VERTEX_POINT('',#493176); +#493176 = CARTESIAN_POINT('',(136.05,-73.32,1.56)); +#493177 = LINE('',#493178,#493179); +#493178 = CARTESIAN_POINT('',(136.95,-73.32,1.56)); +#493179 = VECTOR('',#493180,1.); +#493180 = DIRECTION('',(-1.,0.,0.)); +#493181 = ORIENTED_EDGE('',*,*,#493182,.T.); +#493182 = EDGE_CURVE('',#493175,#493183,#493185,.T.); +#493183 = VERTEX_POINT('',#493184); +#493184 = CARTESIAN_POINT('',(136.05,-74.22,1.56)); +#493185 = LINE('',#493186,#493187); +#493186 = CARTESIAN_POINT('',(136.05,-73.32,1.56)); +#493187 = VECTOR('',#493188,1.); +#493188 = DIRECTION('',(0.,-1.,0.)); +#493189 = ORIENTED_EDGE('',*,*,#493190,.T.); +#493190 = EDGE_CURVE('',#493183,#493165,#493191,.T.); +#493191 = LINE('',#493192,#493193); +#493192 = CARTESIAN_POINT('',(136.05,-74.22,1.56)); +#493193 = VECTOR('',#493194,1.); +#493194 = DIRECTION('',(1.,0.,0.)); +#493195 = FACE_BOUND('',#493196,.F.); +#493196 = EDGE_LOOP('',(#493197,#493207,#493215,#493223)); +#493197 = ORIENTED_EDGE('',*,*,#493198,.T.); +#493198 = EDGE_CURVE('',#493199,#493201,#493203,.T.); +#493199 = VERTEX_POINT('',#493200); +#493200 = CARTESIAN_POINT('',(138.35,-74.22,1.56)); +#493201 = VERTEX_POINT('',#493202); +#493202 = CARTESIAN_POINT('',(138.35,-73.32,1.56)); +#493203 = LINE('',#493204,#493205); +#493204 = CARTESIAN_POINT('',(138.35,-74.22,1.56)); +#493205 = VECTOR('',#493206,1.); +#493206 = DIRECTION('',(0.,1.,0.)); +#493207 = ORIENTED_EDGE('',*,*,#493208,.T.); +#493208 = EDGE_CURVE('',#493201,#493209,#493211,.T.); +#493209 = VERTEX_POINT('',#493210); +#493210 = CARTESIAN_POINT('',(137.45,-73.32,1.56)); +#493211 = LINE('',#493212,#493213); +#493212 = CARTESIAN_POINT('',(138.35,-73.32,1.56)); +#493213 = VECTOR('',#493214,1.); +#493214 = DIRECTION('',(-1.,0.,0.)); +#493215 = ORIENTED_EDGE('',*,*,#493216,.T.); +#493216 = EDGE_CURVE('',#493209,#493217,#493219,.T.); +#493217 = VERTEX_POINT('',#493218); +#493218 = CARTESIAN_POINT('',(137.45,-74.22,1.56)); +#493219 = LINE('',#493220,#493221); +#493220 = CARTESIAN_POINT('',(137.45,-73.32,1.56)); +#493221 = VECTOR('',#493222,1.); +#493222 = DIRECTION('',(0.,-1.,0.)); +#493223 = ORIENTED_EDGE('',*,*,#493224,.T.); +#493224 = EDGE_CURVE('',#493217,#493199,#493225,.T.); +#493225 = LINE('',#493226,#493227); +#493226 = CARTESIAN_POINT('',(137.45,-74.22,1.56)); +#493227 = VECTOR('',#493228,1.); +#493228 = DIRECTION('',(1.,0.,0.)); +#493229 = FACE_BOUND('',#493230,.F.); +#493230 = EDGE_LOOP('',(#493231,#493241,#493249,#493257)); +#493231 = ORIENTED_EDGE('',*,*,#493232,.T.); +#493232 = EDGE_CURVE('',#493233,#493235,#493237,.T.); +#493233 = VERTEX_POINT('',#493234); +#493234 = CARTESIAN_POINT('',(130.,-73.99,1.56)); +#493235 = VERTEX_POINT('',#493236); +#493236 = CARTESIAN_POINT('',(130.,-73.09,1.56)); +#493237 = LINE('',#493238,#493239); +#493238 = CARTESIAN_POINT('',(130.,-73.99,1.56)); +#493239 = VECTOR('',#493240,1.); +#493240 = DIRECTION('',(0.,1.,0.)); +#493241 = ORIENTED_EDGE('',*,*,#493242,.T.); +#493242 = EDGE_CURVE('',#493235,#493243,#493245,.T.); +#493243 = VERTEX_POINT('',#493244); +#493244 = CARTESIAN_POINT('',(128.5,-73.09,1.56)); +#493245 = LINE('',#493246,#493247); +#493246 = CARTESIAN_POINT('',(130.,-73.09,1.56)); +#493247 = VECTOR('',#493248,1.); +#493248 = DIRECTION('',(-1.,0.,0.)); +#493249 = ORIENTED_EDGE('',*,*,#493250,.T.); +#493250 = EDGE_CURVE('',#493243,#493251,#493253,.T.); +#493251 = VERTEX_POINT('',#493252); +#493252 = CARTESIAN_POINT('',(128.5,-73.99,1.56)); +#493253 = LINE('',#493254,#493255); +#493254 = CARTESIAN_POINT('',(128.5,-73.09,1.56)); +#493255 = VECTOR('',#493256,1.); +#493256 = DIRECTION('',(0.,-1.,0.)); +#493257 = ORIENTED_EDGE('',*,*,#493258,.T.); +#493258 = EDGE_CURVE('',#493251,#493233,#493259,.T.); +#493259 = LINE('',#493260,#493261); +#493260 = CARTESIAN_POINT('',(128.5,-73.99,1.56)); +#493261 = VECTOR('',#493262,1.); +#493262 = DIRECTION('',(1.,0.,0.)); +#493263 = FACE_BOUND('',#493264,.F.); +#493264 = EDGE_LOOP('',(#493265,#493275,#493283,#493291)); +#493265 = ORIENTED_EDGE('',*,*,#493266,.T.); +#493266 = EDGE_CURVE('',#493267,#493269,#493271,.T.); +#493267 = VERTEX_POINT('',#493268); +#493268 = CARTESIAN_POINT('',(147.5,-73.99,1.56)); +#493269 = VERTEX_POINT('',#493270); +#493270 = CARTESIAN_POINT('',(147.5,-73.09,1.56)); +#493271 = LINE('',#493272,#493273); +#493272 = CARTESIAN_POINT('',(147.5,-73.99,1.56)); +#493273 = VECTOR('',#493274,1.); +#493274 = DIRECTION('',(0.,1.,0.)); +#493275 = ORIENTED_EDGE('',*,*,#493276,.T.); +#493276 = EDGE_CURVE('',#493269,#493277,#493279,.T.); +#493277 = VERTEX_POINT('',#493278); +#493278 = CARTESIAN_POINT('',(146.,-73.09,1.56)); +#493279 = LINE('',#493280,#493281); +#493280 = CARTESIAN_POINT('',(147.5,-73.09,1.56)); +#493281 = VECTOR('',#493282,1.); +#493282 = DIRECTION('',(-1.,0.,0.)); +#493283 = ORIENTED_EDGE('',*,*,#493284,.T.); +#493284 = EDGE_CURVE('',#493277,#493285,#493287,.T.); +#493285 = VERTEX_POINT('',#493286); +#493286 = CARTESIAN_POINT('',(146.,-73.99,1.56)); +#493287 = LINE('',#493288,#493289); +#493288 = CARTESIAN_POINT('',(146.,-73.09,1.56)); +#493289 = VECTOR('',#493290,1.); +#493290 = DIRECTION('',(0.,-1.,0.)); +#493291 = ORIENTED_EDGE('',*,*,#493292,.T.); +#493292 = EDGE_CURVE('',#493285,#493267,#493293,.T.); +#493293 = LINE('',#493294,#493295); +#493294 = CARTESIAN_POINT('',(146.,-73.99,1.56)); +#493295 = VECTOR('',#493296,1.); +#493296 = DIRECTION('',(1.,0.,0.)); +#493297 = FACE_BOUND('',#493298,.F.); +#493298 = EDGE_LOOP('',(#493299,#493309,#493317,#493325)); +#493299 = ORIENTED_EDGE('',*,*,#493300,.T.); +#493300 = EDGE_CURVE('',#493301,#493303,#493305,.T.); +#493301 = VERTEX_POINT('',#493302); +#493302 = CARTESIAN_POINT('',(135.55,-72.82,1.56)); +#493303 = VERTEX_POINT('',#493304); +#493304 = CARTESIAN_POINT('',(135.55,-71.92,1.56)); +#493305 = LINE('',#493306,#493307); +#493306 = CARTESIAN_POINT('',(135.55,-72.82,1.56)); +#493307 = VECTOR('',#493308,1.); +#493308 = DIRECTION('',(0.,1.,0.)); +#493309 = ORIENTED_EDGE('',*,*,#493310,.T.); +#493310 = EDGE_CURVE('',#493303,#493311,#493313,.T.); +#493311 = VERTEX_POINT('',#493312); +#493312 = CARTESIAN_POINT('',(134.65,-71.92,1.56)); +#493313 = LINE('',#493314,#493315); +#493314 = CARTESIAN_POINT('',(135.55,-71.92,1.56)); +#493315 = VECTOR('',#493316,1.); +#493316 = DIRECTION('',(-1.,0.,0.)); +#493317 = ORIENTED_EDGE('',*,*,#493318,.T.); +#493318 = EDGE_CURVE('',#493311,#493319,#493321,.T.); +#493319 = VERTEX_POINT('',#493320); +#493320 = CARTESIAN_POINT('',(134.65,-72.82,1.56)); +#493321 = LINE('',#493322,#493323); +#493322 = CARTESIAN_POINT('',(134.65,-71.92,1.56)); +#493323 = VECTOR('',#493324,1.); +#493324 = DIRECTION('',(0.,-1.,0.)); +#493325 = ORIENTED_EDGE('',*,*,#493326,.T.); +#493326 = EDGE_CURVE('',#493319,#493301,#493327,.T.); +#493327 = LINE('',#493328,#493329); +#493328 = CARTESIAN_POINT('',(134.65,-72.82,1.56)); +#493329 = VECTOR('',#493330,1.); +#493330 = DIRECTION('',(1.,0.,0.)); +#493331 = FACE_BOUND('',#493332,.F.); +#493332 = EDGE_LOOP('',(#493333,#493343,#493351,#493359)); +#493333 = ORIENTED_EDGE('',*,*,#493334,.T.); +#493334 = EDGE_CURVE('',#493335,#493337,#493339,.T.); +#493335 = VERTEX_POINT('',#493336); +#493336 = CARTESIAN_POINT('',(136.95,-72.82,1.56)); +#493337 = VERTEX_POINT('',#493338); +#493338 = CARTESIAN_POINT('',(136.95,-71.92,1.56)); +#493339 = LINE('',#493340,#493341); +#493340 = CARTESIAN_POINT('',(136.95,-72.82,1.56)); +#493341 = VECTOR('',#493342,1.); +#493342 = DIRECTION('',(0.,1.,0.)); +#493343 = ORIENTED_EDGE('',*,*,#493344,.T.); +#493344 = EDGE_CURVE('',#493337,#493345,#493347,.T.); +#493345 = VERTEX_POINT('',#493346); +#493346 = CARTESIAN_POINT('',(136.05,-71.92,1.56)); +#493347 = LINE('',#493348,#493349); +#493348 = CARTESIAN_POINT('',(136.95,-71.92,1.56)); +#493349 = VECTOR('',#493350,1.); +#493350 = DIRECTION('',(-1.,0.,0.)); +#493351 = ORIENTED_EDGE('',*,*,#493352,.T.); +#493352 = EDGE_CURVE('',#493345,#493353,#493355,.T.); +#493353 = VERTEX_POINT('',#493354); +#493354 = CARTESIAN_POINT('',(136.05,-72.82,1.56)); +#493355 = LINE('',#493356,#493357); +#493356 = CARTESIAN_POINT('',(136.05,-71.92,1.56)); +#493357 = VECTOR('',#493358,1.); +#493358 = DIRECTION('',(0.,-1.,0.)); +#493359 = ORIENTED_EDGE('',*,*,#493360,.T.); +#493360 = EDGE_CURVE('',#493353,#493335,#493361,.T.); +#493361 = LINE('',#493362,#493363); +#493362 = CARTESIAN_POINT('',(136.05,-72.82,1.56)); +#493363 = VECTOR('',#493364,1.); +#493364 = DIRECTION('',(1.,0.,0.)); +#493365 = FACE_BOUND('',#493366,.F.); +#493366 = EDGE_LOOP('',(#493367,#493377,#493385,#493393)); +#493367 = ORIENTED_EDGE('',*,*,#493368,.T.); +#493368 = EDGE_CURVE('',#493369,#493371,#493373,.T.); +#493369 = VERTEX_POINT('',#493370); +#493370 = CARTESIAN_POINT('',(138.35,-72.82,1.56)); +#493371 = VERTEX_POINT('',#493372); +#493372 = CARTESIAN_POINT('',(138.35,-71.92,1.56)); +#493373 = LINE('',#493374,#493375); +#493374 = CARTESIAN_POINT('',(138.35,-72.82,1.56)); +#493375 = VECTOR('',#493376,1.); +#493376 = DIRECTION('',(0.,1.,0.)); +#493377 = ORIENTED_EDGE('',*,*,#493378,.T.); +#493378 = EDGE_CURVE('',#493371,#493379,#493381,.T.); +#493379 = VERTEX_POINT('',#493380); +#493380 = CARTESIAN_POINT('',(137.45,-71.92,1.56)); +#493381 = LINE('',#493382,#493383); +#493382 = CARTESIAN_POINT('',(138.35,-71.92,1.56)); +#493383 = VECTOR('',#493384,1.); +#493384 = DIRECTION('',(-1.,0.,0.)); +#493385 = ORIENTED_EDGE('',*,*,#493386,.T.); +#493386 = EDGE_CURVE('',#493379,#493387,#493389,.T.); +#493387 = VERTEX_POINT('',#493388); +#493388 = CARTESIAN_POINT('',(137.45,-72.82,1.56)); +#493389 = LINE('',#493390,#493391); +#493390 = CARTESIAN_POINT('',(137.45,-71.92,1.56)); +#493391 = VECTOR('',#493392,1.); +#493392 = DIRECTION('',(0.,-1.,0.)); +#493393 = ORIENTED_EDGE('',*,*,#493394,.T.); +#493394 = EDGE_CURVE('',#493387,#493369,#493395,.T.); +#493395 = LINE('',#493396,#493397); +#493396 = CARTESIAN_POINT('',(137.45,-72.82,1.56)); +#493397 = VECTOR('',#493398,1.); +#493398 = DIRECTION('',(1.,0.,0.)); +#493399 = FACE_BOUND('',#493400,.F.); +#493400 = EDGE_LOOP('',(#493401,#493411,#493419,#493427)); +#493401 = ORIENTED_EDGE('',*,*,#493402,.T.); +#493402 = EDGE_CURVE('',#493403,#493405,#493407,.T.); +#493403 = VERTEX_POINT('',#493404); +#493404 = CARTESIAN_POINT('',(130.,-72.72,1.56)); +#493405 = VERTEX_POINT('',#493406); +#493406 = CARTESIAN_POINT('',(130.,-71.82,1.56)); +#493407 = LINE('',#493408,#493409); +#493408 = CARTESIAN_POINT('',(130.,-72.72,1.56)); +#493409 = VECTOR('',#493410,1.); +#493410 = DIRECTION('',(0.,1.,0.)); +#493411 = ORIENTED_EDGE('',*,*,#493412,.T.); +#493412 = EDGE_CURVE('',#493405,#493413,#493415,.T.); +#493413 = VERTEX_POINT('',#493414); +#493414 = CARTESIAN_POINT('',(128.5,-71.82,1.56)); +#493415 = LINE('',#493416,#493417); +#493416 = CARTESIAN_POINT('',(130.,-71.82,1.56)); +#493417 = VECTOR('',#493418,1.); +#493418 = DIRECTION('',(-1.,0.,0.)); +#493419 = ORIENTED_EDGE('',*,*,#493420,.T.); +#493420 = EDGE_CURVE('',#493413,#493421,#493423,.T.); +#493421 = VERTEX_POINT('',#493422); +#493422 = CARTESIAN_POINT('',(128.5,-72.72,1.56)); +#493423 = LINE('',#493424,#493425); +#493424 = CARTESIAN_POINT('',(128.5,-71.82,1.56)); +#493425 = VECTOR('',#493426,1.); +#493426 = DIRECTION('',(0.,-1.,0.)); +#493427 = ORIENTED_EDGE('',*,*,#493428,.T.); +#493428 = EDGE_CURVE('',#493421,#493403,#493429,.T.); +#493429 = LINE('',#493430,#493431); +#493430 = CARTESIAN_POINT('',(128.5,-72.72,1.56)); +#493431 = VECTOR('',#493432,1.); +#493432 = DIRECTION('',(1.,0.,0.)); +#493433 = FACE_BOUND('',#493434,.F.); +#493434 = EDGE_LOOP('',(#493435,#493445,#493453,#493461)); +#493435 = ORIENTED_EDGE('',*,*,#493436,.T.); +#493436 = EDGE_CURVE('',#493437,#493439,#493441,.T.); +#493437 = VERTEX_POINT('',#493438); +#493438 = CARTESIAN_POINT('',(147.5,-72.72,1.56)); +#493439 = VERTEX_POINT('',#493440); +#493440 = CARTESIAN_POINT('',(147.5,-71.82,1.56)); +#493441 = LINE('',#493442,#493443); +#493442 = CARTESIAN_POINT('',(147.5,-72.72,1.56)); +#493443 = VECTOR('',#493444,1.); +#493444 = DIRECTION('',(0.,1.,0.)); +#493445 = ORIENTED_EDGE('',*,*,#493446,.T.); +#493446 = EDGE_CURVE('',#493439,#493447,#493449,.T.); +#493447 = VERTEX_POINT('',#493448); +#493448 = CARTESIAN_POINT('',(146.,-71.82,1.56)); +#493449 = LINE('',#493450,#493451); +#493450 = CARTESIAN_POINT('',(147.5,-71.82,1.56)); +#493451 = VECTOR('',#493452,1.); +#493452 = DIRECTION('',(-1.,0.,0.)); +#493453 = ORIENTED_EDGE('',*,*,#493454,.T.); +#493454 = EDGE_CURVE('',#493447,#493455,#493457,.T.); +#493455 = VERTEX_POINT('',#493456); +#493456 = CARTESIAN_POINT('',(146.,-72.72,1.56)); +#493457 = LINE('',#493458,#493459); +#493458 = CARTESIAN_POINT('',(146.,-71.82,1.56)); +#493459 = VECTOR('',#493460,1.); +#493460 = DIRECTION('',(0.,-1.,0.)); +#493461 = ORIENTED_EDGE('',*,*,#493462,.T.); +#493462 = EDGE_CURVE('',#493455,#493437,#493463,.T.); +#493463 = LINE('',#493464,#493465); +#493464 = CARTESIAN_POINT('',(146.,-72.72,1.56)); +#493465 = VECTOR('',#493466,1.); +#493466 = DIRECTION('',(1.,0.,0.)); +#493467 = FACE_BOUND('',#493468,.F.); +#493468 = EDGE_LOOP('',(#493469,#493479,#493487,#493495)); +#493469 = ORIENTED_EDGE('',*,*,#493470,.T.); +#493470 = EDGE_CURVE('',#493471,#493473,#493475,.T.); +#493471 = VERTEX_POINT('',#493472); +#493472 = CARTESIAN_POINT('',(130.,-71.45,1.56)); +#493473 = VERTEX_POINT('',#493474); +#493474 = CARTESIAN_POINT('',(130.,-70.55,1.56)); +#493475 = LINE('',#493476,#493477); +#493476 = CARTESIAN_POINT('',(130.,-71.45,1.56)); +#493477 = VECTOR('',#493478,1.); +#493478 = DIRECTION('',(0.,1.,0.)); +#493479 = ORIENTED_EDGE('',*,*,#493480,.T.); +#493480 = EDGE_CURVE('',#493473,#493481,#493483,.T.); +#493481 = VERTEX_POINT('',#493482); +#493482 = CARTESIAN_POINT('',(128.5,-70.55,1.56)); +#493483 = LINE('',#493484,#493485); +#493484 = CARTESIAN_POINT('',(130.,-70.55,1.56)); +#493485 = VECTOR('',#493486,1.); +#493486 = DIRECTION('',(-1.,0.,0.)); +#493487 = ORIENTED_EDGE('',*,*,#493488,.T.); +#493488 = EDGE_CURVE('',#493481,#493489,#493491,.T.); +#493489 = VERTEX_POINT('',#493490); +#493490 = CARTESIAN_POINT('',(128.5,-71.45,1.56)); +#493491 = LINE('',#493492,#493493); +#493492 = CARTESIAN_POINT('',(128.5,-70.55,1.56)); +#493493 = VECTOR('',#493494,1.); +#493494 = DIRECTION('',(0.,-1.,0.)); +#493495 = ORIENTED_EDGE('',*,*,#493496,.T.); +#493496 = EDGE_CURVE('',#493489,#493471,#493497,.T.); +#493497 = LINE('',#493498,#493499); +#493498 = CARTESIAN_POINT('',(128.5,-71.45,1.56)); +#493499 = VECTOR('',#493500,1.); +#493500 = DIRECTION('',(1.,0.,0.)); +#493501 = FACE_BOUND('',#493502,.F.); +#493502 = EDGE_LOOP('',(#493503,#493513,#493521,#493529)); +#493503 = ORIENTED_EDGE('',*,*,#493504,.T.); +#493504 = EDGE_CURVE('',#493505,#493507,#493509,.T.); +#493505 = VERTEX_POINT('',#493506); +#493506 = CARTESIAN_POINT('',(147.5,-71.45,1.56)); +#493507 = VERTEX_POINT('',#493508); +#493508 = CARTESIAN_POINT('',(147.5,-70.55,1.56)); +#493509 = LINE('',#493510,#493511); +#493510 = CARTESIAN_POINT('',(147.5,-71.45,1.56)); +#493511 = VECTOR('',#493512,1.); +#493512 = DIRECTION('',(0.,1.,0.)); +#493513 = ORIENTED_EDGE('',*,*,#493514,.T.); +#493514 = EDGE_CURVE('',#493507,#493515,#493517,.T.); +#493515 = VERTEX_POINT('',#493516); +#493516 = CARTESIAN_POINT('',(146.,-70.55,1.56)); +#493517 = LINE('',#493518,#493519); +#493518 = CARTESIAN_POINT('',(147.5,-70.55,1.56)); +#493519 = VECTOR('',#493520,1.); +#493520 = DIRECTION('',(-1.,0.,0.)); +#493521 = ORIENTED_EDGE('',*,*,#493522,.T.); +#493522 = EDGE_CURVE('',#493515,#493523,#493525,.T.); +#493523 = VERTEX_POINT('',#493524); +#493524 = CARTESIAN_POINT('',(146.,-71.45,1.56)); +#493525 = LINE('',#493526,#493527); +#493526 = CARTESIAN_POINT('',(146.,-70.55,1.56)); +#493527 = VECTOR('',#493528,1.); +#493528 = DIRECTION('',(0.,-1.,0.)); +#493529 = ORIENTED_EDGE('',*,*,#493530,.T.); +#493530 = EDGE_CURVE('',#493523,#493505,#493531,.T.); +#493531 = LINE('',#493532,#493533); +#493532 = CARTESIAN_POINT('',(146.,-71.45,1.56)); +#493533 = VECTOR('',#493534,1.); +#493534 = DIRECTION('',(1.,0.,0.)); +#493535 = FACE_BOUND('',#493536,.F.); +#493536 = EDGE_LOOP('',(#493537,#493547,#493555,#493563)); +#493537 = ORIENTED_EDGE('',*,*,#493538,.T.); +#493538 = EDGE_CURVE('',#493539,#493541,#493543,.T.); +#493539 = VERTEX_POINT('',#493540); +#493540 = CARTESIAN_POINT('',(135.55,-71.42,1.56)); +#493541 = VERTEX_POINT('',#493542); +#493542 = CARTESIAN_POINT('',(135.55,-70.52,1.56)); +#493543 = LINE('',#493544,#493545); +#493544 = CARTESIAN_POINT('',(135.55,-71.42,1.56)); +#493545 = VECTOR('',#493546,1.); +#493546 = DIRECTION('',(0.,1.,0.)); +#493547 = ORIENTED_EDGE('',*,*,#493548,.T.); +#493548 = EDGE_CURVE('',#493541,#493549,#493551,.T.); +#493549 = VERTEX_POINT('',#493550); +#493550 = CARTESIAN_POINT('',(134.65,-70.52,1.56)); +#493551 = LINE('',#493552,#493553); +#493552 = CARTESIAN_POINT('',(135.55,-70.52,1.56)); +#493553 = VECTOR('',#493554,1.); +#493554 = DIRECTION('',(-1.,0.,0.)); +#493555 = ORIENTED_EDGE('',*,*,#493556,.T.); +#493556 = EDGE_CURVE('',#493549,#493557,#493559,.T.); +#493557 = VERTEX_POINT('',#493558); +#493558 = CARTESIAN_POINT('',(134.65,-71.42,1.56)); +#493559 = LINE('',#493560,#493561); +#493560 = CARTESIAN_POINT('',(134.65,-70.52,1.56)); +#493561 = VECTOR('',#493562,1.); +#493562 = DIRECTION('',(0.,-1.,0.)); +#493563 = ORIENTED_EDGE('',*,*,#493564,.T.); +#493564 = EDGE_CURVE('',#493557,#493539,#493565,.T.); +#493565 = LINE('',#493566,#493567); +#493566 = CARTESIAN_POINT('',(134.65,-71.42,1.56)); +#493567 = VECTOR('',#493568,1.); +#493568 = DIRECTION('',(1.,0.,0.)); +#493569 = FACE_BOUND('',#493570,.F.); +#493570 = EDGE_LOOP('',(#493571,#493581,#493589,#493597)); +#493571 = ORIENTED_EDGE('',*,*,#493572,.T.); +#493572 = EDGE_CURVE('',#493573,#493575,#493577,.T.); +#493573 = VERTEX_POINT('',#493574); +#493574 = CARTESIAN_POINT('',(136.95,-71.42,1.56)); +#493575 = VERTEX_POINT('',#493576); +#493576 = CARTESIAN_POINT('',(136.95,-70.52,1.56)); +#493577 = LINE('',#493578,#493579); +#493578 = CARTESIAN_POINT('',(136.95,-71.42,1.56)); +#493579 = VECTOR('',#493580,1.); +#493580 = DIRECTION('',(0.,1.,0.)); +#493581 = ORIENTED_EDGE('',*,*,#493582,.T.); +#493582 = EDGE_CURVE('',#493575,#493583,#493585,.T.); +#493583 = VERTEX_POINT('',#493584); +#493584 = CARTESIAN_POINT('',(136.05,-70.52,1.56)); +#493585 = LINE('',#493586,#493587); +#493586 = CARTESIAN_POINT('',(136.95,-70.52,1.56)); +#493587 = VECTOR('',#493588,1.); +#493588 = DIRECTION('',(-1.,0.,0.)); +#493589 = ORIENTED_EDGE('',*,*,#493590,.T.); +#493590 = EDGE_CURVE('',#493583,#493591,#493593,.T.); +#493591 = VERTEX_POINT('',#493592); +#493592 = CARTESIAN_POINT('',(136.05,-71.42,1.56)); +#493593 = LINE('',#493594,#493595); +#493594 = CARTESIAN_POINT('',(136.05,-70.52,1.56)); +#493595 = VECTOR('',#493596,1.); +#493596 = DIRECTION('',(0.,-1.,0.)); +#493597 = ORIENTED_EDGE('',*,*,#493598,.T.); +#493598 = EDGE_CURVE('',#493591,#493573,#493599,.T.); +#493599 = LINE('',#493600,#493601); +#493600 = CARTESIAN_POINT('',(136.05,-71.42,1.56)); +#493601 = VECTOR('',#493602,1.); +#493602 = DIRECTION('',(1.,0.,0.)); +#493603 = FACE_BOUND('',#493604,.F.); +#493604 = EDGE_LOOP('',(#493605,#493615,#493623,#493631)); +#493605 = ORIENTED_EDGE('',*,*,#493606,.T.); +#493606 = EDGE_CURVE('',#493607,#493609,#493611,.T.); +#493607 = VERTEX_POINT('',#493608); +#493608 = CARTESIAN_POINT('',(138.35,-71.42,1.56)); +#493609 = VERTEX_POINT('',#493610); +#493610 = CARTESIAN_POINT('',(138.35,-70.52,1.56)); +#493611 = LINE('',#493612,#493613); +#493612 = CARTESIAN_POINT('',(138.35,-71.42,1.56)); +#493613 = VECTOR('',#493614,1.); +#493614 = DIRECTION('',(0.,1.,0.)); +#493615 = ORIENTED_EDGE('',*,*,#493616,.T.); +#493616 = EDGE_CURVE('',#493609,#493617,#493619,.T.); +#493617 = VERTEX_POINT('',#493618); +#493618 = CARTESIAN_POINT('',(137.45,-70.52,1.56)); +#493619 = LINE('',#493620,#493621); +#493620 = CARTESIAN_POINT('',(138.35,-70.52,1.56)); +#493621 = VECTOR('',#493622,1.); +#493622 = DIRECTION('',(-1.,0.,0.)); +#493623 = ORIENTED_EDGE('',*,*,#493624,.T.); +#493624 = EDGE_CURVE('',#493617,#493625,#493627,.T.); +#493625 = VERTEX_POINT('',#493626); +#493626 = CARTESIAN_POINT('',(137.45,-71.42,1.56)); +#493627 = LINE('',#493628,#493629); +#493628 = CARTESIAN_POINT('',(137.45,-70.52,1.56)); +#493629 = VECTOR('',#493630,1.); +#493630 = DIRECTION('',(0.,-1.,0.)); +#493631 = ORIENTED_EDGE('',*,*,#493632,.T.); +#493632 = EDGE_CURVE('',#493625,#493607,#493633,.T.); +#493633 = LINE('',#493634,#493635); +#493634 = CARTESIAN_POINT('',(137.45,-71.42,1.56)); +#493635 = VECTOR('',#493636,1.); +#493636 = DIRECTION('',(1.,0.,0.)); +#493637 = FACE_BOUND('',#493638,.F.); +#493638 = EDGE_LOOP('',(#493639)); +#493639 = ORIENTED_EDGE('',*,*,#493640,.T.); +#493640 = EDGE_CURVE('',#493641,#493641,#493643,.T.); +#493641 = VERTEX_POINT('',#493642); +#493642 = CARTESIAN_POINT('',(124.649999,-69.2,1.56)); +#493643 = CIRCLE('',#493644,1.349999); +#493644 = AXIS2_PLACEMENT_3D('',#493645,#493646,#493647); +#493645 = CARTESIAN_POINT('',(123.3,-69.2,1.56)); +#493646 = DIRECTION('',(0.,0.,1.)); +#493647 = DIRECTION('',(1.,0.,-0.)); +#493648 = FACE_BOUND('',#493649,.F.); +#493649 = EDGE_LOOP('',(#493650)); +#493650 = ORIENTED_EDGE('',*,*,#493651,.T.); +#493651 = EDGE_CURVE('',#493652,#493652,#493654,.T.); +#493652 = VERTEX_POINT('',#493653); +#493653 = CARTESIAN_POINT('',(153.049999,-69.2,1.56)); +#493654 = CIRCLE('',#493655,1.349999); +#493655 = AXIS2_PLACEMENT_3D('',#493656,#493657,#493658); +#493656 = CARTESIAN_POINT('',(151.7,-69.2,1.56)); +#493657 = DIRECTION('',(0.,0.,1.)); +#493658 = DIRECTION('',(1.,0.,-0.)); +#493659 = FACE_BOUND('',#493660,.F.); +#493660 = EDGE_LOOP('',(#493661,#493671,#493679,#493687)); +#493661 = ORIENTED_EDGE('',*,*,#493662,.T.); +#493662 = EDGE_CURVE('',#493663,#493665,#493667,.T.); +#493663 = VERTEX_POINT('',#493664); +#493664 = CARTESIAN_POINT('',(130.,-70.18,1.56)); +#493665 = VERTEX_POINT('',#493666); +#493666 = CARTESIAN_POINT('',(130.,-69.28,1.56)); +#493667 = LINE('',#493668,#493669); +#493668 = CARTESIAN_POINT('',(130.,-70.18,1.56)); +#493669 = VECTOR('',#493670,1.); +#493670 = DIRECTION('',(0.,1.,0.)); +#493671 = ORIENTED_EDGE('',*,*,#493672,.T.); +#493672 = EDGE_CURVE('',#493665,#493673,#493675,.T.); +#493673 = VERTEX_POINT('',#493674); +#493674 = CARTESIAN_POINT('',(128.5,-69.28,1.56)); +#493675 = LINE('',#493676,#493677); +#493676 = CARTESIAN_POINT('',(130.,-69.28,1.56)); +#493677 = VECTOR('',#493678,1.); +#493678 = DIRECTION('',(-1.,0.,0.)); +#493679 = ORIENTED_EDGE('',*,*,#493680,.T.); +#493680 = EDGE_CURVE('',#493673,#493681,#493683,.T.); +#493681 = VERTEX_POINT('',#493682); +#493682 = CARTESIAN_POINT('',(128.5,-70.18,1.56)); +#493683 = LINE('',#493684,#493685); +#493684 = CARTESIAN_POINT('',(128.5,-69.28,1.56)); +#493685 = VECTOR('',#493686,1.); +#493686 = DIRECTION('',(0.,-1.,0.)); +#493687 = ORIENTED_EDGE('',*,*,#493688,.T.); +#493688 = EDGE_CURVE('',#493681,#493663,#493689,.T.); +#493689 = LINE('',#493690,#493691); +#493690 = CARTESIAN_POINT('',(128.5,-70.18,1.56)); +#493691 = VECTOR('',#493692,1.); +#493692 = DIRECTION('',(1.,0.,0.)); +#493693 = FACE_BOUND('',#493694,.F.); +#493694 = EDGE_LOOP('',(#493695,#493705,#493713,#493721)); +#493695 = ORIENTED_EDGE('',*,*,#493696,.T.); +#493696 = EDGE_CURVE('',#493697,#493699,#493701,.T.); +#493697 = VERTEX_POINT('',#493698); +#493698 = CARTESIAN_POINT('',(147.5,-70.18,1.56)); +#493699 = VERTEX_POINT('',#493700); +#493700 = CARTESIAN_POINT('',(147.5,-69.28,1.56)); +#493701 = LINE('',#493702,#493703); +#493702 = CARTESIAN_POINT('',(147.5,-70.18,1.56)); +#493703 = VECTOR('',#493704,1.); +#493704 = DIRECTION('',(0.,1.,0.)); +#493705 = ORIENTED_EDGE('',*,*,#493706,.T.); +#493706 = EDGE_CURVE('',#493699,#493707,#493709,.T.); +#493707 = VERTEX_POINT('',#493708); +#493708 = CARTESIAN_POINT('',(146.,-69.28,1.56)); +#493709 = LINE('',#493710,#493711); +#493710 = CARTESIAN_POINT('',(147.5,-69.28,1.56)); +#493711 = VECTOR('',#493712,1.); +#493712 = DIRECTION('',(-1.,0.,0.)); +#493713 = ORIENTED_EDGE('',*,*,#493714,.T.); +#493714 = EDGE_CURVE('',#493707,#493715,#493717,.T.); +#493715 = VERTEX_POINT('',#493716); +#493716 = CARTESIAN_POINT('',(146.,-70.18,1.56)); +#493717 = LINE('',#493718,#493719); +#493718 = CARTESIAN_POINT('',(146.,-69.28,1.56)); +#493719 = VECTOR('',#493720,1.); +#493720 = DIRECTION('',(0.,-1.,0.)); +#493721 = ORIENTED_EDGE('',*,*,#493722,.T.); +#493722 = EDGE_CURVE('',#493715,#493697,#493723,.T.); +#493723 = LINE('',#493724,#493725); +#493724 = CARTESIAN_POINT('',(146.,-70.18,1.56)); +#493725 = VECTOR('',#493726,1.); +#493726 = DIRECTION('',(1.,0.,0.)); +#493727 = FACE_BOUND('',#493728,.F.); +#493728 = EDGE_LOOP('',(#493729,#493739,#493747,#493755)); +#493729 = ORIENTED_EDGE('',*,*,#493730,.T.); +#493730 = EDGE_CURVE('',#493731,#493733,#493735,.T.); +#493731 = VERTEX_POINT('',#493732); +#493732 = CARTESIAN_POINT('',(130.,-68.91,1.56)); +#493733 = VERTEX_POINT('',#493734); +#493734 = CARTESIAN_POINT('',(130.,-68.01,1.56)); +#493735 = LINE('',#493736,#493737); +#493736 = CARTESIAN_POINT('',(130.,-68.91,1.56)); +#493737 = VECTOR('',#493738,1.); +#493738 = DIRECTION('',(0.,1.,0.)); +#493739 = ORIENTED_EDGE('',*,*,#493740,.T.); +#493740 = EDGE_CURVE('',#493733,#493741,#493743,.T.); +#493741 = VERTEX_POINT('',#493742); +#493742 = CARTESIAN_POINT('',(128.5,-68.01,1.56)); +#493743 = LINE('',#493744,#493745); +#493744 = CARTESIAN_POINT('',(130.,-68.01,1.56)); +#493745 = VECTOR('',#493746,1.); +#493746 = DIRECTION('',(-1.,0.,0.)); +#493747 = ORIENTED_EDGE('',*,*,#493748,.T.); +#493748 = EDGE_CURVE('',#493741,#493749,#493751,.T.); +#493749 = VERTEX_POINT('',#493750); +#493750 = CARTESIAN_POINT('',(128.5,-68.91,1.56)); +#493751 = LINE('',#493752,#493753); +#493752 = CARTESIAN_POINT('',(128.5,-68.01,1.56)); +#493753 = VECTOR('',#493754,1.); +#493754 = DIRECTION('',(0.,-1.,0.)); +#493755 = ORIENTED_EDGE('',*,*,#493756,.T.); +#493756 = EDGE_CURVE('',#493749,#493731,#493757,.T.); +#493757 = LINE('',#493758,#493759); +#493758 = CARTESIAN_POINT('',(128.5,-68.91,1.56)); +#493759 = VECTOR('',#493760,1.); +#493760 = DIRECTION('',(1.,0.,0.)); +#493761 = FACE_BOUND('',#493762,.F.); +#493762 = EDGE_LOOP('',(#493763,#493773,#493781,#493789)); +#493763 = ORIENTED_EDGE('',*,*,#493764,.T.); +#493764 = EDGE_CURVE('',#493765,#493767,#493769,.T.); +#493765 = VERTEX_POINT('',#493766); +#493766 = CARTESIAN_POINT('',(147.5,-68.91,1.56)); +#493767 = VERTEX_POINT('',#493768); +#493768 = CARTESIAN_POINT('',(147.5,-68.01,1.56)); +#493769 = LINE('',#493770,#493771); +#493770 = CARTESIAN_POINT('',(147.5,-68.91,1.56)); +#493771 = VECTOR('',#493772,1.); +#493772 = DIRECTION('',(0.,1.,0.)); +#493773 = ORIENTED_EDGE('',*,*,#493774,.T.); +#493774 = EDGE_CURVE('',#493767,#493775,#493777,.T.); +#493775 = VERTEX_POINT('',#493776); +#493776 = CARTESIAN_POINT('',(146.,-68.01,1.56)); +#493777 = LINE('',#493778,#493779); +#493778 = CARTESIAN_POINT('',(147.5,-68.01,1.56)); +#493779 = VECTOR('',#493780,1.); +#493780 = DIRECTION('',(-1.,0.,0.)); +#493781 = ORIENTED_EDGE('',*,*,#493782,.T.); +#493782 = EDGE_CURVE('',#493775,#493783,#493785,.T.); +#493783 = VERTEX_POINT('',#493784); +#493784 = CARTESIAN_POINT('',(146.,-68.91,1.56)); +#493785 = LINE('',#493786,#493787); +#493786 = CARTESIAN_POINT('',(146.,-68.01,1.56)); +#493787 = VECTOR('',#493788,1.); +#493788 = DIRECTION('',(0.,-1.,0.)); +#493789 = ORIENTED_EDGE('',*,*,#493790,.T.); +#493790 = EDGE_CURVE('',#493783,#493765,#493791,.T.); +#493791 = LINE('',#493792,#493793); +#493792 = CARTESIAN_POINT('',(146.,-68.91,1.56)); +#493793 = VECTOR('',#493794,1.); +#493794 = DIRECTION('',(1.,0.,0.)); +#493795 = FACE_BOUND('',#493796,.F.); +#493796 = EDGE_LOOP('',(#493797,#493808,#493816,#493825,#493833,#493842, + #493850,#493859)); +#493797 = ORIENTED_EDGE('',*,*,#493798,.T.); +#493798 = EDGE_CURVE('',#493799,#493801,#493803,.T.); +#493799 = VERTEX_POINT('',#493800); +#493800 = CARTESIAN_POINT('',(126.65,-67.215,1.56)); +#493801 = VERTEX_POINT('',#493802); +#493802 = CARTESIAN_POINT('',(126.515,-67.08,1.56)); +#493803 = CIRCLE('',#493804,0.135001418495); +#493804 = AXIS2_PLACEMENT_3D('',#493805,#493806,#493807); +#493805 = CARTESIAN_POINT('',(126.51499858151,-67.21500141848,1.56)); +#493806 = DIRECTION('',(0.,0.,1.)); +#493807 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#493808 = ORIENTED_EDGE('',*,*,#493809,.T.); +#493809 = EDGE_CURVE('',#493801,#493810,#493812,.T.); +#493810 = VERTEX_POINT('',#493811); +#493811 = CARTESIAN_POINT('',(126.245,-67.08,1.56)); +#493812 = LINE('',#493813,#493814); +#493813 = CARTESIAN_POINT('',(126.515,-67.08,1.56)); +#493814 = VECTOR('',#493815,1.); +#493815 = DIRECTION('',(-1.,0.,0.)); +#493816 = ORIENTED_EDGE('',*,*,#493817,.T.); +#493817 = EDGE_CURVE('',#493810,#493818,#493820,.T.); +#493818 = VERTEX_POINT('',#493819); +#493819 = CARTESIAN_POINT('',(126.11,-67.215,1.56)); +#493820 = CIRCLE('',#493821,0.135001418495); +#493821 = AXIS2_PLACEMENT_3D('',#493822,#493823,#493824); +#493822 = CARTESIAN_POINT('',(126.24500141848,-67.21500141848,1.56)); +#493823 = DIRECTION('',(0.,0.,1.)); +#493824 = DIRECTION('',(-1.050720641103E-05,0.999999999945,0.)); +#493825 = ORIENTED_EDGE('',*,*,#493826,.T.); +#493826 = EDGE_CURVE('',#493818,#493827,#493829,.T.); +#493827 = VERTEX_POINT('',#493828); +#493828 = CARTESIAN_POINT('',(126.11,-67.585,1.56)); +#493829 = LINE('',#493830,#493831); +#493830 = CARTESIAN_POINT('',(126.11,-67.215,1.56)); +#493831 = VECTOR('',#493832,1.); +#493832 = DIRECTION('',(0.,-1.,0.)); +#493833 = ORIENTED_EDGE('',*,*,#493834,.T.); +#493834 = EDGE_CURVE('',#493827,#493835,#493837,.T.); +#493835 = VERTEX_POINT('',#493836); +#493836 = CARTESIAN_POINT('',(126.245,-67.72,1.56)); +#493837 = CIRCLE('',#493838,0.135001418495); +#493838 = AXIS2_PLACEMENT_3D('',#493839,#493840,#493841); +#493839 = CARTESIAN_POINT('',(126.24500141848,-67.58499858151,1.56)); +#493840 = DIRECTION('',(0.,0.,1.)); +#493841 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#493842 = ORIENTED_EDGE('',*,*,#493843,.T.); +#493843 = EDGE_CURVE('',#493835,#493844,#493846,.T.); +#493844 = VERTEX_POINT('',#493845); +#493845 = CARTESIAN_POINT('',(126.515,-67.72,1.56)); +#493846 = LINE('',#493847,#493848); +#493847 = CARTESIAN_POINT('',(126.245,-67.72,1.56)); +#493848 = VECTOR('',#493849,1.); +#493849 = DIRECTION('',(1.,0.,0.)); +#493850 = ORIENTED_EDGE('',*,*,#493851,.T.); +#493851 = EDGE_CURVE('',#493844,#493852,#493854,.T.); +#493852 = VERTEX_POINT('',#493853); +#493853 = CARTESIAN_POINT('',(126.65,-67.585,1.56)); +#493854 = CIRCLE('',#493855,0.135001418495); +#493855 = AXIS2_PLACEMENT_3D('',#493856,#493857,#493858); +#493856 = CARTESIAN_POINT('',(126.51499858151,-67.58499858151,1.56)); +#493857 = DIRECTION('',(0.,0.,1.)); +#493858 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#493859 = ORIENTED_EDGE('',*,*,#493860,.T.); +#493860 = EDGE_CURVE('',#493852,#493799,#493861,.T.); +#493861 = LINE('',#493862,#493863); +#493862 = CARTESIAN_POINT('',(126.65,-67.585,1.56)); +#493863 = VECTOR('',#493864,1.); +#493864 = DIRECTION('',(0.,1.,0.)); +#493865 = FACE_BOUND('',#493866,.F.); +#493866 = EDGE_LOOP('',(#493867,#493878,#493886,#493895,#493903,#493912, + #493920,#493929)); +#493867 = ORIENTED_EDGE('',*,*,#493868,.T.); +#493868 = EDGE_CURVE('',#493869,#493871,#493873,.T.); +#493869 = VERTEX_POINT('',#493870); +#493870 = CARTESIAN_POINT('',(127.67,-67.215,1.56)); +#493871 = VERTEX_POINT('',#493872); +#493872 = CARTESIAN_POINT('',(127.535,-67.08,1.56)); +#493873 = CIRCLE('',#493874,0.135001418495); +#493874 = AXIS2_PLACEMENT_3D('',#493875,#493876,#493877); +#493875 = CARTESIAN_POINT('',(127.53499858151,-67.21500141848,1.56)); +#493876 = DIRECTION('',(0.,0.,1.)); +#493877 = DIRECTION('',(0.999999999945,1.050720641103E-05,-0.)); +#493878 = ORIENTED_EDGE('',*,*,#493879,.T.); +#493879 = EDGE_CURVE('',#493871,#493880,#493882,.T.); +#493880 = VERTEX_POINT('',#493881); +#493881 = CARTESIAN_POINT('',(127.265,-67.08,1.56)); +#493882 = LINE('',#493883,#493884); +#493883 = CARTESIAN_POINT('',(127.535,-67.08,1.56)); +#493884 = VECTOR('',#493885,1.); +#493885 = DIRECTION('',(-1.,0.,0.)); +#493886 = ORIENTED_EDGE('',*,*,#493887,.T.); +#493887 = EDGE_CURVE('',#493880,#493888,#493890,.T.); +#493888 = VERTEX_POINT('',#493889); +#493889 = CARTESIAN_POINT('',(127.13,-67.215,1.56)); +#493890 = CIRCLE('',#493891,0.135001418495); +#493891 = AXIS2_PLACEMENT_3D('',#493892,#493893,#493894); +#493892 = CARTESIAN_POINT('',(127.26500141848,-67.21500141848,1.56)); +#493893 = DIRECTION('',(0.,0.,1.)); +#493894 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#493895 = ORIENTED_EDGE('',*,*,#493896,.T.); +#493896 = EDGE_CURVE('',#493888,#493897,#493899,.T.); +#493897 = VERTEX_POINT('',#493898); +#493898 = CARTESIAN_POINT('',(127.13,-67.585,1.56)); +#493899 = LINE('',#493900,#493901); +#493900 = CARTESIAN_POINT('',(127.13,-67.215,1.56)); +#493901 = VECTOR('',#493902,1.); +#493902 = DIRECTION('',(0.,-1.,0.)); +#493903 = ORIENTED_EDGE('',*,*,#493904,.T.); +#493904 = EDGE_CURVE('',#493897,#493905,#493907,.T.); +#493905 = VERTEX_POINT('',#493906); +#493906 = CARTESIAN_POINT('',(127.265,-67.72,1.56)); +#493907 = CIRCLE('',#493908,0.135001418495); +#493908 = AXIS2_PLACEMENT_3D('',#493909,#493910,#493911); +#493909 = CARTESIAN_POINT('',(127.26500141848,-67.58499858151,1.56)); +#493910 = DIRECTION('',(0.,0.,1.)); +#493911 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#493912 = ORIENTED_EDGE('',*,*,#493913,.T.); +#493913 = EDGE_CURVE('',#493905,#493914,#493916,.T.); +#493914 = VERTEX_POINT('',#493915); +#493915 = CARTESIAN_POINT('',(127.535,-67.72,1.56)); +#493916 = LINE('',#493917,#493918); +#493917 = CARTESIAN_POINT('',(127.265,-67.72,1.56)); +#493918 = VECTOR('',#493919,1.); +#493919 = DIRECTION('',(1.,0.,0.)); +#493920 = ORIENTED_EDGE('',*,*,#493921,.T.); +#493921 = EDGE_CURVE('',#493914,#493922,#493924,.T.); +#493922 = VERTEX_POINT('',#493923); +#493923 = CARTESIAN_POINT('',(127.67,-67.585,1.56)); +#493924 = CIRCLE('',#493925,0.135001418495); +#493925 = AXIS2_PLACEMENT_3D('',#493926,#493927,#493928); +#493926 = CARTESIAN_POINT('',(127.53499858151,-67.58499858151,1.56)); +#493927 = DIRECTION('',(0.,0.,1.)); +#493928 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#493929 = ORIENTED_EDGE('',*,*,#493930,.T.); +#493930 = EDGE_CURVE('',#493922,#493869,#493931,.T.); +#493931 = LINE('',#493932,#493933); +#493932 = CARTESIAN_POINT('',(127.67,-67.585,1.56)); +#493933 = VECTOR('',#493934,1.); +#493934 = DIRECTION('',(0.,1.,0.)); +#493935 = FACE_BOUND('',#493936,.F.); +#493936 = EDGE_LOOP('',(#493937,#493947,#493955,#493963)); +#493937 = ORIENTED_EDGE('',*,*,#493938,.T.); +#493938 = EDGE_CURVE('',#493939,#493941,#493943,.T.); +#493939 = VERTEX_POINT('',#493940); +#493940 = CARTESIAN_POINT('',(130.,-67.64,1.56)); +#493941 = VERTEX_POINT('',#493942); +#493942 = CARTESIAN_POINT('',(130.,-66.74,1.56)); +#493943 = LINE('',#493944,#493945); +#493944 = CARTESIAN_POINT('',(130.,-67.64,1.56)); +#493945 = VECTOR('',#493946,1.); +#493946 = DIRECTION('',(0.,1.,0.)); +#493947 = ORIENTED_EDGE('',*,*,#493948,.T.); +#493948 = EDGE_CURVE('',#493941,#493949,#493951,.T.); +#493949 = VERTEX_POINT('',#493950); +#493950 = CARTESIAN_POINT('',(128.5,-66.74,1.56)); +#493951 = LINE('',#493952,#493953); +#493952 = CARTESIAN_POINT('',(130.,-66.74,1.56)); +#493953 = VECTOR('',#493954,1.); +#493954 = DIRECTION('',(-1.,0.,0.)); +#493955 = ORIENTED_EDGE('',*,*,#493956,.T.); +#493956 = EDGE_CURVE('',#493949,#493957,#493959,.T.); +#493957 = VERTEX_POINT('',#493958); +#493958 = CARTESIAN_POINT('',(128.5,-67.64,1.56)); +#493959 = LINE('',#493960,#493961); +#493960 = CARTESIAN_POINT('',(128.5,-66.74,1.56)); +#493961 = VECTOR('',#493962,1.); +#493962 = DIRECTION('',(0.,-1.,0.)); +#493963 = ORIENTED_EDGE('',*,*,#493964,.T.); +#493964 = EDGE_CURVE('',#493957,#493939,#493965,.T.); +#493965 = LINE('',#493966,#493967); +#493966 = CARTESIAN_POINT('',(128.5,-67.64,1.56)); +#493967 = VECTOR('',#493968,1.); +#493968 = DIRECTION('',(1.,0.,0.)); +#493969 = FACE_BOUND('',#493970,.F.); +#493970 = EDGE_LOOP('',(#493971,#493981,#493989,#493997)); +#493971 = ORIENTED_EDGE('',*,*,#493972,.T.); +#493972 = EDGE_CURVE('',#493973,#493975,#493977,.T.); +#493973 = VERTEX_POINT('',#493974); +#493974 = CARTESIAN_POINT('',(147.5,-67.64,1.56)); +#493975 = VERTEX_POINT('',#493976); +#493976 = CARTESIAN_POINT('',(147.5,-66.74,1.56)); +#493977 = LINE('',#493978,#493979); +#493978 = CARTESIAN_POINT('',(147.5,-67.64,1.56)); +#493979 = VECTOR('',#493980,1.); +#493980 = DIRECTION('',(0.,1.,0.)); +#493981 = ORIENTED_EDGE('',*,*,#493982,.T.); +#493982 = EDGE_CURVE('',#493975,#493983,#493985,.T.); +#493983 = VERTEX_POINT('',#493984); +#493984 = CARTESIAN_POINT('',(146.,-66.74,1.56)); +#493985 = LINE('',#493986,#493987); +#493986 = CARTESIAN_POINT('',(147.5,-66.74,1.56)); +#493987 = VECTOR('',#493988,1.); +#493988 = DIRECTION('',(-1.,0.,0.)); +#493989 = ORIENTED_EDGE('',*,*,#493990,.T.); +#493990 = EDGE_CURVE('',#493983,#493991,#493993,.T.); +#493991 = VERTEX_POINT('',#493992); +#493992 = CARTESIAN_POINT('',(146.,-67.64,1.56)); +#493993 = LINE('',#493994,#493995); +#493994 = CARTESIAN_POINT('',(146.,-66.74,1.56)); +#493995 = VECTOR('',#493996,1.); +#493996 = DIRECTION('',(0.,-1.,0.)); +#493997 = ORIENTED_EDGE('',*,*,#493998,.T.); +#493998 = EDGE_CURVE('',#493991,#493973,#493999,.T.); +#493999 = LINE('',#494000,#494001); +#494000 = CARTESIAN_POINT('',(146.,-67.64,1.56)); +#494001 = VECTOR('',#494002,1.); +#494002 = DIRECTION('',(1.,0.,0.)); +#494003 = FACE_BOUND('',#494004,.F.); +#494004 = EDGE_LOOP('',(#494005,#494016,#494024,#494033,#494041,#494050, + #494058,#494067)); +#494005 = ORIENTED_EDGE('',*,*,#494006,.T.); +#494006 = EDGE_CURVE('',#494007,#494009,#494011,.T.); +#494007 = VERTEX_POINT('',#494008); +#494008 = CARTESIAN_POINT('',(126.72,-66.23,1.56)); +#494009 = VERTEX_POINT('',#494010); +#494010 = CARTESIAN_POINT('',(126.58,-66.09,1.56)); +#494011 = CIRCLE('',#494012,0.139999827125); +#494012 = AXIS2_PLACEMENT_3D('',#494013,#494014,#494015); +#494013 = CARTESIAN_POINT('',(126.58000017287,-66.22999982712,1.56)); +#494014 = DIRECTION('',(0.,0.,1.)); +#494015 = DIRECTION('',(0.999999999999,-1.234820349747E-06,0.)); +#494016 = ORIENTED_EDGE('',*,*,#494017,.T.); +#494017 = EDGE_CURVE('',#494009,#494018,#494020,.T.); +#494018 = VERTEX_POINT('',#494019); +#494019 = CARTESIAN_POINT('',(126.3,-66.09,1.56)); +#494020 = LINE('',#494021,#494022); +#494021 = CARTESIAN_POINT('',(126.58,-66.09,1.56)); +#494022 = VECTOR('',#494023,1.); +#494023 = DIRECTION('',(-1.,0.,0.)); +#494024 = ORIENTED_EDGE('',*,*,#494025,.T.); +#494025 = EDGE_CURVE('',#494018,#494026,#494028,.T.); +#494026 = VERTEX_POINT('',#494027); +#494027 = CARTESIAN_POINT('',(126.16,-66.23,1.56)); +#494028 = CIRCLE('',#494029,0.139999827125); +#494029 = AXIS2_PLACEMENT_3D('',#494030,#494031,#494032); +#494030 = CARTESIAN_POINT('',(126.29999982712,-66.22999982712,1.56)); +#494031 = DIRECTION('',(0.,0.,1.)); +#494032 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#494033 = ORIENTED_EDGE('',*,*,#494034,.T.); +#494034 = EDGE_CURVE('',#494026,#494035,#494037,.T.); +#494035 = VERTEX_POINT('',#494036); +#494036 = CARTESIAN_POINT('',(126.16,-66.57,1.56)); +#494037 = LINE('',#494038,#494039); +#494038 = CARTESIAN_POINT('',(126.16,-66.23,1.56)); +#494039 = VECTOR('',#494040,1.); +#494040 = DIRECTION('',(0.,-1.,0.)); +#494041 = ORIENTED_EDGE('',*,*,#494042,.T.); +#494042 = EDGE_CURVE('',#494035,#494043,#494045,.T.); +#494043 = VERTEX_POINT('',#494044); +#494044 = CARTESIAN_POINT('',(126.3,-66.71,1.56)); +#494045 = CIRCLE('',#494046,0.139999827125); +#494046 = AXIS2_PLACEMENT_3D('',#494047,#494048,#494049); +#494047 = CARTESIAN_POINT('',(126.29999982712,-66.57000017287,1.56)); +#494048 = DIRECTION('',(0.,0.,1.)); +#494049 = DIRECTION('',(-0.999999999999,1.234820349747E-06,0.)); +#494050 = ORIENTED_EDGE('',*,*,#494051,.T.); +#494051 = EDGE_CURVE('',#494043,#494052,#494054,.T.); +#494052 = VERTEX_POINT('',#494053); +#494053 = CARTESIAN_POINT('',(126.58,-66.71,1.56)); +#494054 = LINE('',#494055,#494056); +#494055 = CARTESIAN_POINT('',(126.3,-66.71,1.56)); +#494056 = VECTOR('',#494057,1.); +#494057 = DIRECTION('',(1.,0.,0.)); +#494058 = ORIENTED_EDGE('',*,*,#494059,.T.); +#494059 = EDGE_CURVE('',#494052,#494060,#494062,.T.); +#494060 = VERTEX_POINT('',#494061); +#494061 = CARTESIAN_POINT('',(126.72,-66.57,1.56)); +#494062 = CIRCLE('',#494063,0.139999827125); +#494063 = AXIS2_PLACEMENT_3D('',#494064,#494065,#494066); +#494064 = CARTESIAN_POINT('',(126.58000017287,-66.57000017287,1.56)); +#494065 = DIRECTION('',(0.,0.,1.)); +#494066 = DIRECTION('',(-1.234820349747E-06,-0.999999999999,0.)); +#494067 = ORIENTED_EDGE('',*,*,#494068,.T.); +#494068 = EDGE_CURVE('',#494060,#494007,#494069,.T.); +#494069 = LINE('',#494070,#494071); +#494070 = CARTESIAN_POINT('',(126.72,-66.57,1.56)); +#494071 = VECTOR('',#494072,1.); +#494072 = DIRECTION('',(0.,1.,0.)); +#494073 = FACE_BOUND('',#494074,.F.); +#494074 = EDGE_LOOP('',(#494075,#494086,#494094,#494103,#494111,#494120, + #494128,#494137)); +#494075 = ORIENTED_EDGE('',*,*,#494076,.T.); +#494076 = EDGE_CURVE('',#494077,#494079,#494081,.T.); +#494077 = VERTEX_POINT('',#494078); +#494078 = CARTESIAN_POINT('',(127.68,-66.23,1.56)); +#494079 = VERTEX_POINT('',#494080); +#494080 = CARTESIAN_POINT('',(127.54,-66.09,1.56)); +#494081 = CIRCLE('',#494082,0.139999827126); +#494082 = AXIS2_PLACEMENT_3D('',#494083,#494084,#494085); +#494083 = CARTESIAN_POINT('',(127.54000017287,-66.22999982712,1.56)); +#494084 = DIRECTION('',(0.,0.,1.)); +#494085 = DIRECTION('',(0.999999999999,-1.234820146735E-06,0.)); +#494086 = ORIENTED_EDGE('',*,*,#494087,.T.); +#494087 = EDGE_CURVE('',#494079,#494088,#494090,.T.); +#494088 = VERTEX_POINT('',#494089); +#494089 = CARTESIAN_POINT('',(127.26,-66.09,1.56)); +#494090 = LINE('',#494091,#494092); +#494091 = CARTESIAN_POINT('',(127.54,-66.09,1.56)); +#494092 = VECTOR('',#494093,1.); +#494093 = DIRECTION('',(-1.,0.,0.)); +#494094 = ORIENTED_EDGE('',*,*,#494095,.T.); +#494095 = EDGE_CURVE('',#494088,#494096,#494098,.T.); +#494096 = VERTEX_POINT('',#494097); +#494097 = CARTESIAN_POINT('',(127.12,-66.23,1.56)); +#494098 = CIRCLE('',#494099,0.139999827125); +#494099 = AXIS2_PLACEMENT_3D('',#494100,#494101,#494102); +#494100 = CARTESIAN_POINT('',(127.25999982712,-66.22999982712,1.56)); +#494101 = DIRECTION('',(0.,0.,1.)); +#494102 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#494103 = ORIENTED_EDGE('',*,*,#494104,.T.); +#494104 = EDGE_CURVE('',#494096,#494105,#494107,.T.); +#494105 = VERTEX_POINT('',#494106); +#494106 = CARTESIAN_POINT('',(127.12,-66.57,1.56)); +#494107 = LINE('',#494108,#494109); +#494108 = CARTESIAN_POINT('',(127.12,-66.23,1.56)); +#494109 = VECTOR('',#494110,1.); +#494110 = DIRECTION('',(0.,-1.,0.)); +#494111 = ORIENTED_EDGE('',*,*,#494112,.T.); +#494112 = EDGE_CURVE('',#494105,#494113,#494115,.T.); +#494113 = VERTEX_POINT('',#494114); +#494114 = CARTESIAN_POINT('',(127.26,-66.71,1.56)); +#494115 = CIRCLE('',#494116,0.139999827125); +#494116 = AXIS2_PLACEMENT_3D('',#494117,#494118,#494119); +#494117 = CARTESIAN_POINT('',(127.25999982712,-66.57000017287,1.56)); +#494118 = DIRECTION('',(0.,0.,1.)); +#494119 = DIRECTION('',(-0.999999999999,1.234820349747E-06,0.)); +#494120 = ORIENTED_EDGE('',*,*,#494121,.T.); +#494121 = EDGE_CURVE('',#494113,#494122,#494124,.T.); +#494122 = VERTEX_POINT('',#494123); +#494123 = CARTESIAN_POINT('',(127.54,-66.71,1.56)); +#494124 = LINE('',#494125,#494126); +#494125 = CARTESIAN_POINT('',(127.26,-66.71,1.56)); +#494126 = VECTOR('',#494127,1.); +#494127 = DIRECTION('',(1.,0.,0.)); +#494128 = ORIENTED_EDGE('',*,*,#494129,.T.); +#494129 = EDGE_CURVE('',#494122,#494130,#494132,.T.); +#494130 = VERTEX_POINT('',#494131); +#494131 = CARTESIAN_POINT('',(127.68,-66.57,1.56)); +#494132 = CIRCLE('',#494133,0.139999827126); +#494133 = AXIS2_PLACEMENT_3D('',#494134,#494135,#494136); +#494134 = CARTESIAN_POINT('',(127.54000017287,-66.57000017287,1.56)); +#494135 = DIRECTION('',(0.,0.,1.)); +#494136 = DIRECTION('',(-1.234820146735E-06,-0.999999999999,0.)); +#494137 = ORIENTED_EDGE('',*,*,#494138,.T.); +#494138 = EDGE_CURVE('',#494130,#494077,#494139,.T.); +#494139 = LINE('',#494140,#494141); +#494140 = CARTESIAN_POINT('',(127.68,-66.57,1.56)); +#494141 = VECTOR('',#494142,1.); +#494142 = DIRECTION('',(0.,1.,0.)); +#494143 = FACE_BOUND('',#494144,.F.); +#494144 = EDGE_LOOP('',(#494145,#494155,#494163,#494171)); +#494145 = ORIENTED_EDGE('',*,*,#494146,.T.); +#494146 = EDGE_CURVE('',#494147,#494149,#494151,.T.); +#494147 = VERTEX_POINT('',#494148); +#494148 = CARTESIAN_POINT('',(130.,-66.37,1.56)); +#494149 = VERTEX_POINT('',#494150); +#494150 = CARTESIAN_POINT('',(130.,-65.47,1.56)); +#494151 = LINE('',#494152,#494153); +#494152 = CARTESIAN_POINT('',(130.,-66.37,1.56)); +#494153 = VECTOR('',#494154,1.); +#494154 = DIRECTION('',(0.,1.,0.)); +#494155 = ORIENTED_EDGE('',*,*,#494156,.T.); +#494156 = EDGE_CURVE('',#494149,#494157,#494159,.T.); +#494157 = VERTEX_POINT('',#494158); +#494158 = CARTESIAN_POINT('',(128.5,-65.47,1.56)); +#494159 = LINE('',#494160,#494161); +#494160 = CARTESIAN_POINT('',(130.,-65.47,1.56)); +#494161 = VECTOR('',#494162,1.); +#494162 = DIRECTION('',(-1.,0.,0.)); +#494163 = ORIENTED_EDGE('',*,*,#494164,.T.); +#494164 = EDGE_CURVE('',#494157,#494165,#494167,.T.); +#494165 = VERTEX_POINT('',#494166); +#494166 = CARTESIAN_POINT('',(128.5,-66.37,1.56)); +#494167 = LINE('',#494168,#494169); +#494168 = CARTESIAN_POINT('',(128.5,-65.47,1.56)); +#494169 = VECTOR('',#494170,1.); +#494170 = DIRECTION('',(0.,-1.,0.)); +#494171 = ORIENTED_EDGE('',*,*,#494172,.T.); +#494172 = EDGE_CURVE('',#494165,#494147,#494173,.T.); +#494173 = LINE('',#494174,#494175); +#494174 = CARTESIAN_POINT('',(128.5,-66.37,1.56)); +#494175 = VECTOR('',#494176,1.); +#494176 = DIRECTION('',(1.,0.,0.)); +#494177 = FACE_BOUND('',#494178,.F.); +#494178 = EDGE_LOOP('',(#494179,#494189,#494197,#494205)); +#494179 = ORIENTED_EDGE('',*,*,#494180,.T.); +#494180 = EDGE_CURVE('',#494181,#494183,#494185,.T.); +#494181 = VERTEX_POINT('',#494182); +#494182 = CARTESIAN_POINT('',(147.5,-66.37,1.56)); +#494183 = VERTEX_POINT('',#494184); +#494184 = CARTESIAN_POINT('',(147.5,-65.47,1.56)); +#494185 = LINE('',#494186,#494187); +#494186 = CARTESIAN_POINT('',(147.5,-66.37,1.56)); +#494187 = VECTOR('',#494188,1.); +#494188 = DIRECTION('',(0.,1.,0.)); +#494189 = ORIENTED_EDGE('',*,*,#494190,.T.); +#494190 = EDGE_CURVE('',#494183,#494191,#494193,.T.); +#494191 = VERTEX_POINT('',#494192); +#494192 = CARTESIAN_POINT('',(146.,-65.47,1.56)); +#494193 = LINE('',#494194,#494195); +#494194 = CARTESIAN_POINT('',(147.5,-65.47,1.56)); +#494195 = VECTOR('',#494196,1.); +#494196 = DIRECTION('',(-1.,0.,0.)); +#494197 = ORIENTED_EDGE('',*,*,#494198,.T.); +#494198 = EDGE_CURVE('',#494191,#494199,#494201,.T.); +#494199 = VERTEX_POINT('',#494200); +#494200 = CARTESIAN_POINT('',(146.,-66.37,1.56)); +#494201 = LINE('',#494202,#494203); +#494202 = CARTESIAN_POINT('',(146.,-65.47,1.56)); +#494203 = VECTOR('',#494204,1.); +#494204 = DIRECTION('',(0.,-1.,0.)); +#494205 = ORIENTED_EDGE('',*,*,#494206,.T.); +#494206 = EDGE_CURVE('',#494199,#494181,#494207,.T.); +#494207 = LINE('',#494208,#494209); +#494208 = CARTESIAN_POINT('',(146.,-66.37,1.56)); +#494209 = VECTOR('',#494210,1.); +#494210 = DIRECTION('',(1.,0.,0.)); +#494211 = FACE_BOUND('',#494212,.F.); +#494212 = EDGE_LOOP('',(#494213,#494224,#494232,#494241,#494249,#494258, + #494266,#494275)); +#494213 = ORIENTED_EDGE('',*,*,#494214,.T.); +#494214 = EDGE_CURVE('',#494215,#494217,#494219,.T.); +#494215 = VERTEX_POINT('',#494216); +#494216 = CARTESIAN_POINT('',(127.81,-65.22,1.56)); +#494217 = VERTEX_POINT('',#494218); +#494218 = CARTESIAN_POINT('',(127.67,-65.08,1.56)); +#494219 = CIRCLE('',#494220,0.139999827125); +#494220 = AXIS2_PLACEMENT_3D('',#494221,#494222,#494223); +#494221 = CARTESIAN_POINT('',(127.67000017287,-65.21999982712,1.56)); +#494222 = DIRECTION('',(0.,0.,1.)); +#494223 = DIRECTION('',(0.999999999999,-1.234820349747E-06,0.)); +#494224 = ORIENTED_EDGE('',*,*,#494225,.T.); +#494225 = EDGE_CURVE('',#494217,#494226,#494228,.T.); +#494226 = VERTEX_POINT('',#494227); +#494227 = CARTESIAN_POINT('',(127.33,-65.08,1.56)); +#494228 = LINE('',#494229,#494230); +#494229 = CARTESIAN_POINT('',(127.67,-65.08,1.56)); +#494230 = VECTOR('',#494231,1.); +#494231 = DIRECTION('',(-1.,0.,0.)); +#494232 = ORIENTED_EDGE('',*,*,#494233,.T.); +#494233 = EDGE_CURVE('',#494226,#494234,#494236,.T.); +#494234 = VERTEX_POINT('',#494235); +#494235 = CARTESIAN_POINT('',(127.19,-65.22,1.56)); +#494236 = CIRCLE('',#494237,0.139999827125); +#494237 = AXIS2_PLACEMENT_3D('',#494238,#494239,#494240); +#494238 = CARTESIAN_POINT('',(127.32999982712,-65.21999982712,1.56)); +#494239 = DIRECTION('',(0.,0.,1.)); +#494240 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#494241 = ORIENTED_EDGE('',*,*,#494242,.T.); +#494242 = EDGE_CURVE('',#494234,#494243,#494245,.T.); +#494243 = VERTEX_POINT('',#494244); +#494244 = CARTESIAN_POINT('',(127.19,-65.5,1.56)); +#494245 = LINE('',#494246,#494247); +#494246 = CARTESIAN_POINT('',(127.19,-65.22,1.56)); +#494247 = VECTOR('',#494248,1.); +#494248 = DIRECTION('',(0.,-1.,0.)); +#494249 = ORIENTED_EDGE('',*,*,#494250,.T.); +#494250 = EDGE_CURVE('',#494243,#494251,#494253,.T.); +#494251 = VERTEX_POINT('',#494252); +#494252 = CARTESIAN_POINT('',(127.33,-65.64,1.56)); +#494253 = CIRCLE('',#494254,0.139999827125); +#494254 = AXIS2_PLACEMENT_3D('',#494255,#494256,#494257); +#494255 = CARTESIAN_POINT('',(127.32999982712,-65.50000017287,1.56)); +#494256 = DIRECTION('',(0.,0.,1.)); +#494257 = DIRECTION('',(-0.999999999999,1.234820349747E-06,0.)); +#494258 = ORIENTED_EDGE('',*,*,#494259,.T.); +#494259 = EDGE_CURVE('',#494251,#494260,#494262,.T.); +#494260 = VERTEX_POINT('',#494261); +#494261 = CARTESIAN_POINT('',(127.67,-65.64,1.56)); +#494262 = LINE('',#494263,#494264); +#494263 = CARTESIAN_POINT('',(127.33,-65.64,1.56)); +#494264 = VECTOR('',#494265,1.); +#494265 = DIRECTION('',(1.,0.,0.)); +#494266 = ORIENTED_EDGE('',*,*,#494267,.T.); +#494267 = EDGE_CURVE('',#494260,#494268,#494270,.T.); +#494268 = VERTEX_POINT('',#494269); +#494269 = CARTESIAN_POINT('',(127.81,-65.5,1.56)); +#494270 = CIRCLE('',#494271,0.139999827125); +#494271 = AXIS2_PLACEMENT_3D('',#494272,#494273,#494274); +#494272 = CARTESIAN_POINT('',(127.67000017287,-65.50000017287,1.56)); +#494273 = DIRECTION('',(0.,0.,1.)); +#494274 = DIRECTION('',(-1.234820349747E-06,-0.999999999999,0.)); +#494275 = ORIENTED_EDGE('',*,*,#494276,.T.); +#494276 = EDGE_CURVE('',#494268,#494215,#494277,.T.); +#494277 = LINE('',#494278,#494279); +#494278 = CARTESIAN_POINT('',(127.81,-65.5,1.56)); +#494279 = VECTOR('',#494280,1.); +#494280 = DIRECTION('',(0.,1.,0.)); +#494281 = FACE_BOUND('',#494282,.F.); +#494282 = EDGE_LOOP('',(#494283,#494294,#494302,#494311,#494319,#494328, + #494336,#494345)); +#494283 = ORIENTED_EDGE('',*,*,#494284,.T.); +#494284 = EDGE_CURVE('',#494285,#494287,#494289,.T.); +#494285 = VERTEX_POINT('',#494286); +#494286 = CARTESIAN_POINT('',(125.05,-64.45,1.56)); +#494287 = VERTEX_POINT('',#494288); +#494288 = CARTESIAN_POINT('',(124.825,-64.225,1.56)); +#494289 = CIRCLE('',#494290,0.225000087974); +#494290 = AXIS2_PLACEMENT_3D('',#494291,#494292,#494293); +#494291 = CARTESIAN_POINT('',(124.82499991202,-64.45000008797,1.56)); +#494292 = DIRECTION('',(0.,0.,1.)); +#494293 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#494294 = ORIENTED_EDGE('',*,*,#494295,.T.); +#494295 = EDGE_CURVE('',#494287,#494296,#494298,.T.); +#494296 = VERTEX_POINT('',#494297); +#494297 = CARTESIAN_POINT('',(124.375,-64.225,1.56)); +#494298 = LINE('',#494299,#494300); +#494299 = CARTESIAN_POINT('',(124.825,-64.225,1.56)); +#494300 = VECTOR('',#494301,1.); +#494301 = DIRECTION('',(-1.,0.,0.)); +#494302 = ORIENTED_EDGE('',*,*,#494303,.T.); +#494303 = EDGE_CURVE('',#494296,#494304,#494306,.T.); +#494304 = VERTEX_POINT('',#494305); +#494305 = CARTESIAN_POINT('',(124.15,-64.45,1.56)); +#494306 = CIRCLE('',#494307,0.225000087974); +#494307 = AXIS2_PLACEMENT_3D('',#494308,#494309,#494310); +#494308 = CARTESIAN_POINT('',(124.37500008797,-64.45000008797,1.56)); +#494309 = DIRECTION('',(0.,0.,1.)); +#494310 = DIRECTION('',(-3.909954721353E-07,1.,0.)); +#494311 = ORIENTED_EDGE('',*,*,#494312,.T.); +#494312 = EDGE_CURVE('',#494304,#494313,#494315,.T.); +#494313 = VERTEX_POINT('',#494314); +#494314 = CARTESIAN_POINT('',(124.15,-64.95,1.56)); +#494315 = LINE('',#494316,#494317); +#494316 = CARTESIAN_POINT('',(124.15,-64.45,1.56)); +#494317 = VECTOR('',#494318,1.); +#494318 = DIRECTION('',(0.,-1.,0.)); +#494319 = ORIENTED_EDGE('',*,*,#494320,.T.); +#494320 = EDGE_CURVE('',#494313,#494321,#494323,.T.); +#494321 = VERTEX_POINT('',#494322); +#494322 = CARTESIAN_POINT('',(124.375,-65.175,1.56)); +#494323 = CIRCLE('',#494324,0.225000087974); +#494324 = AXIS2_PLACEMENT_3D('',#494325,#494326,#494327); +#494325 = CARTESIAN_POINT('',(124.37500008797,-64.94999991202,1.56)); +#494326 = DIRECTION('',(0.,0.,1.)); +#494327 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#494328 = ORIENTED_EDGE('',*,*,#494329,.T.); +#494329 = EDGE_CURVE('',#494321,#494330,#494332,.T.); +#494330 = VERTEX_POINT('',#494331); +#494331 = CARTESIAN_POINT('',(124.825,-65.175,1.56)); +#494332 = LINE('',#494333,#494334); +#494333 = CARTESIAN_POINT('',(124.375,-65.175,1.56)); +#494334 = VECTOR('',#494335,1.); +#494335 = DIRECTION('',(1.,0.,0.)); +#494336 = ORIENTED_EDGE('',*,*,#494337,.T.); +#494337 = EDGE_CURVE('',#494330,#494338,#494340,.T.); +#494338 = VERTEX_POINT('',#494339); +#494339 = CARTESIAN_POINT('',(125.05,-64.95,1.56)); +#494340 = CIRCLE('',#494341,0.225000087974); +#494341 = AXIS2_PLACEMENT_3D('',#494342,#494343,#494344); +#494342 = CARTESIAN_POINT('',(124.82499991202,-64.94999991202,1.56)); +#494343 = DIRECTION('',(0.,0.,1.)); +#494344 = DIRECTION('',(3.909953458166E-07,-1.,0.)); +#494345 = ORIENTED_EDGE('',*,*,#494346,.T.); +#494346 = EDGE_CURVE('',#494338,#494285,#494347,.T.); +#494347 = LINE('',#494348,#494349); +#494348 = CARTESIAN_POINT('',(125.05,-64.95,1.56)); +#494349 = VECTOR('',#494350,1.); +#494350 = DIRECTION('',(0.,1.,0.)); +#494351 = FACE_BOUND('',#494352,.F.); +#494352 = EDGE_LOOP('',(#494353,#494364,#494372,#494381,#494389,#494398, + #494406,#494415)); +#494353 = ORIENTED_EDGE('',*,*,#494354,.T.); +#494354 = EDGE_CURVE('',#494355,#494357,#494359,.T.); +#494355 = VERTEX_POINT('',#494356); +#494356 = CARTESIAN_POINT('',(126.6,-64.45,1.56)); +#494357 = VERTEX_POINT('',#494358); +#494358 = CARTESIAN_POINT('',(126.375,-64.225,1.56)); +#494359 = CIRCLE('',#494360,0.225000087974); +#494360 = AXIS2_PLACEMENT_3D('',#494361,#494362,#494363); +#494361 = CARTESIAN_POINT('',(126.37499991202,-64.45000008797,1.56)); +#494362 = DIRECTION('',(0.,0.,1.)); +#494363 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#494364 = ORIENTED_EDGE('',*,*,#494365,.T.); +#494365 = EDGE_CURVE('',#494357,#494366,#494368,.T.); +#494366 = VERTEX_POINT('',#494367); +#494367 = CARTESIAN_POINT('',(125.925,-64.225,1.56)); +#494368 = LINE('',#494369,#494370); +#494369 = CARTESIAN_POINT('',(126.375,-64.225,1.56)); +#494370 = VECTOR('',#494371,1.); +#494371 = DIRECTION('',(-1.,0.,0.)); +#494372 = ORIENTED_EDGE('',*,*,#494373,.T.); +#494373 = EDGE_CURVE('',#494366,#494374,#494376,.T.); +#494374 = VERTEX_POINT('',#494375); +#494375 = CARTESIAN_POINT('',(125.7,-64.45,1.56)); +#494376 = CIRCLE('',#494377,0.225000087974); +#494377 = AXIS2_PLACEMENT_3D('',#494378,#494379,#494380); +#494378 = CARTESIAN_POINT('',(125.92500008797,-64.45000008797,1.56)); +#494379 = DIRECTION('',(0.,0.,1.)); +#494380 = DIRECTION('',(-3.909954721353E-07,1.,0.)); +#494381 = ORIENTED_EDGE('',*,*,#494382,.T.); +#494382 = EDGE_CURVE('',#494374,#494383,#494385,.T.); +#494383 = VERTEX_POINT('',#494384); +#494384 = CARTESIAN_POINT('',(125.7,-64.95,1.56)); +#494385 = LINE('',#494386,#494387); +#494386 = CARTESIAN_POINT('',(125.7,-64.45,1.56)); +#494387 = VECTOR('',#494388,1.); +#494388 = DIRECTION('',(0.,-1.,0.)); +#494389 = ORIENTED_EDGE('',*,*,#494390,.T.); +#494390 = EDGE_CURVE('',#494383,#494391,#494393,.T.); +#494391 = VERTEX_POINT('',#494392); +#494392 = CARTESIAN_POINT('',(125.925,-65.175,1.56)); +#494393 = CIRCLE('',#494394,0.225000087974); +#494394 = AXIS2_PLACEMENT_3D('',#494395,#494396,#494397); +#494395 = CARTESIAN_POINT('',(125.92500008797,-64.94999991202,1.56)); +#494396 = DIRECTION('',(0.,0.,1.)); +#494397 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#494398 = ORIENTED_EDGE('',*,*,#494399,.T.); +#494399 = EDGE_CURVE('',#494391,#494400,#494402,.T.); +#494400 = VERTEX_POINT('',#494401); +#494401 = CARTESIAN_POINT('',(126.375,-65.175,1.56)); +#494402 = LINE('',#494403,#494404); +#494403 = CARTESIAN_POINT('',(125.925,-65.175,1.56)); +#494404 = VECTOR('',#494405,1.); +#494405 = DIRECTION('',(1.,0.,0.)); +#494406 = ORIENTED_EDGE('',*,*,#494407,.T.); +#494407 = EDGE_CURVE('',#494400,#494408,#494410,.T.); +#494408 = VERTEX_POINT('',#494409); +#494409 = CARTESIAN_POINT('',(126.6,-64.95,1.56)); +#494410 = CIRCLE('',#494411,0.225000087974); +#494411 = AXIS2_PLACEMENT_3D('',#494412,#494413,#494414); +#494412 = CARTESIAN_POINT('',(126.37499991202,-64.94999991202,1.56)); +#494413 = DIRECTION('',(0.,0.,1.)); +#494414 = DIRECTION('',(3.909953458166E-07,-1.,0.)); +#494415 = ORIENTED_EDGE('',*,*,#494416,.T.); +#494416 = EDGE_CURVE('',#494408,#494355,#494417,.T.); +#494417 = LINE('',#494418,#494419); +#494418 = CARTESIAN_POINT('',(126.6,-64.95,1.56)); +#494419 = VECTOR('',#494420,1.); +#494420 = DIRECTION('',(0.,1.,0.)); +#494421 = FACE_BOUND('',#494422,.F.); +#494422 = EDGE_LOOP('',(#494423,#494433,#494441,#494449)); +#494423 = ORIENTED_EDGE('',*,*,#494424,.T.); +#494424 = EDGE_CURVE('',#494425,#494427,#494429,.T.); +#494425 = VERTEX_POINT('',#494426); +#494426 = CARTESIAN_POINT('',(130.,-65.1,1.56)); +#494427 = VERTEX_POINT('',#494428); +#494428 = CARTESIAN_POINT('',(130.,-64.2,1.56)); +#494429 = LINE('',#494430,#494431); +#494430 = CARTESIAN_POINT('',(130.,-65.1,1.56)); +#494431 = VECTOR('',#494432,1.); +#494432 = DIRECTION('',(0.,1.,0.)); +#494433 = ORIENTED_EDGE('',*,*,#494434,.T.); +#494434 = EDGE_CURVE('',#494427,#494435,#494437,.T.); +#494435 = VERTEX_POINT('',#494436); +#494436 = CARTESIAN_POINT('',(128.5,-64.2,1.56)); +#494437 = LINE('',#494438,#494439); +#494438 = CARTESIAN_POINT('',(130.,-64.2,1.56)); +#494439 = VECTOR('',#494440,1.); +#494440 = DIRECTION('',(-1.,0.,0.)); +#494441 = ORIENTED_EDGE('',*,*,#494442,.T.); +#494442 = EDGE_CURVE('',#494435,#494443,#494445,.T.); +#494443 = VERTEX_POINT('',#494444); +#494444 = CARTESIAN_POINT('',(128.5,-65.1,1.56)); +#494445 = LINE('',#494446,#494447); +#494446 = CARTESIAN_POINT('',(128.5,-64.2,1.56)); +#494447 = VECTOR('',#494448,1.); +#494448 = DIRECTION('',(0.,-1.,0.)); +#494449 = ORIENTED_EDGE('',*,*,#494450,.T.); +#494450 = EDGE_CURVE('',#494443,#494425,#494451,.T.); +#494451 = LINE('',#494452,#494453); +#494452 = CARTESIAN_POINT('',(128.5,-65.1,1.56)); +#494453 = VECTOR('',#494454,1.); +#494454 = DIRECTION('',(1.,0.,0.)); +#494455 = FACE_BOUND('',#494456,.F.); +#494456 = EDGE_LOOP('',(#494457,#494467,#494475,#494483)); +#494457 = ORIENTED_EDGE('',*,*,#494458,.T.); +#494458 = EDGE_CURVE('',#494459,#494461,#494463,.T.); +#494459 = VERTEX_POINT('',#494460); +#494460 = CARTESIAN_POINT('',(147.5,-65.1,1.56)); +#494461 = VERTEX_POINT('',#494462); +#494462 = CARTESIAN_POINT('',(147.5,-64.2,1.56)); +#494463 = LINE('',#494464,#494465); +#494464 = CARTESIAN_POINT('',(147.5,-65.1,1.56)); +#494465 = VECTOR('',#494466,1.); +#494466 = DIRECTION('',(0.,1.,0.)); +#494467 = ORIENTED_EDGE('',*,*,#494468,.T.); +#494468 = EDGE_CURVE('',#494461,#494469,#494471,.T.); +#494469 = VERTEX_POINT('',#494470); +#494470 = CARTESIAN_POINT('',(146.,-64.2,1.56)); +#494471 = LINE('',#494472,#494473); +#494472 = CARTESIAN_POINT('',(147.5,-64.2,1.56)); +#494473 = VECTOR('',#494474,1.); +#494474 = DIRECTION('',(-1.,0.,0.)); +#494475 = ORIENTED_EDGE('',*,*,#494476,.T.); +#494476 = EDGE_CURVE('',#494469,#494477,#494479,.T.); +#494477 = VERTEX_POINT('',#494478); +#494478 = CARTESIAN_POINT('',(146.,-65.1,1.56)); +#494479 = LINE('',#494480,#494481); +#494480 = CARTESIAN_POINT('',(146.,-64.2,1.56)); +#494481 = VECTOR('',#494482,1.); +#494482 = DIRECTION('',(0.,-1.,0.)); +#494483 = ORIENTED_EDGE('',*,*,#494484,.T.); +#494484 = EDGE_CURVE('',#494477,#494459,#494485,.T.); +#494485 = LINE('',#494486,#494487); +#494486 = CARTESIAN_POINT('',(146.,-65.1,1.56)); +#494487 = VECTOR('',#494488,1.); +#494488 = DIRECTION('',(1.,0.,0.)); +#494489 = FACE_BOUND('',#494490,.F.); +#494490 = EDGE_LOOP('',(#494491,#494502,#494510,#494519,#494527,#494536, + #494544,#494553)); +#494491 = ORIENTED_EDGE('',*,*,#494492,.T.); +#494492 = EDGE_CURVE('',#494493,#494495,#494497,.T.); +#494493 = VERTEX_POINT('',#494494); +#494494 = CARTESIAN_POINT('',(127.81,-64.26,1.56)); +#494495 = VERTEX_POINT('',#494496); +#494496 = CARTESIAN_POINT('',(127.67,-64.12,1.56)); +#494497 = CIRCLE('',#494498,0.139999827125); +#494498 = AXIS2_PLACEMENT_3D('',#494499,#494500,#494501); +#494499 = CARTESIAN_POINT('',(127.67000017287,-64.25999982712,1.56)); +#494500 = DIRECTION('',(0.,0.,1.)); +#494501 = DIRECTION('',(0.999999999999,-1.234820349747E-06,0.)); +#494502 = ORIENTED_EDGE('',*,*,#494503,.T.); +#494503 = EDGE_CURVE('',#494495,#494504,#494506,.T.); +#494504 = VERTEX_POINT('',#494505); +#494505 = CARTESIAN_POINT('',(127.33,-64.12,1.56)); +#494506 = LINE('',#494507,#494508); +#494507 = CARTESIAN_POINT('',(127.67,-64.12,1.56)); +#494508 = VECTOR('',#494509,1.); +#494509 = DIRECTION('',(-1.,0.,0.)); +#494510 = ORIENTED_EDGE('',*,*,#494511,.T.); +#494511 = EDGE_CURVE('',#494504,#494512,#494514,.T.); +#494512 = VERTEX_POINT('',#494513); +#494513 = CARTESIAN_POINT('',(127.19,-64.26,1.56)); +#494514 = CIRCLE('',#494515,0.139999827125); +#494515 = AXIS2_PLACEMENT_3D('',#494516,#494517,#494518); +#494516 = CARTESIAN_POINT('',(127.32999982712,-64.25999982712,1.56)); +#494517 = DIRECTION('',(0.,0.,1.)); +#494518 = DIRECTION('',(1.234820349747E-06,0.999999999999,-0.)); +#494519 = ORIENTED_EDGE('',*,*,#494520,.T.); +#494520 = EDGE_CURVE('',#494512,#494521,#494523,.T.); +#494521 = VERTEX_POINT('',#494522); +#494522 = CARTESIAN_POINT('',(127.19,-64.54,1.56)); +#494523 = LINE('',#494524,#494525); +#494524 = CARTESIAN_POINT('',(127.19,-64.26,1.56)); +#494525 = VECTOR('',#494526,1.); +#494526 = DIRECTION('',(0.,-1.,0.)); +#494527 = ORIENTED_EDGE('',*,*,#494528,.T.); +#494528 = EDGE_CURVE('',#494521,#494529,#494531,.T.); +#494529 = VERTEX_POINT('',#494530); +#494530 = CARTESIAN_POINT('',(127.33,-64.68,1.56)); +#494531 = CIRCLE('',#494532,0.139999827126); +#494532 = AXIS2_PLACEMENT_3D('',#494533,#494534,#494535); +#494533 = CARTESIAN_POINT('',(127.32999982712,-64.54000017287,1.56)); +#494534 = DIRECTION('',(0.,0.,1.)); +#494535 = DIRECTION('',(-0.999999999999,1.234820146735E-06,0.)); +#494536 = ORIENTED_EDGE('',*,*,#494537,.T.); +#494537 = EDGE_CURVE('',#494529,#494538,#494540,.T.); +#494538 = VERTEX_POINT('',#494539); +#494539 = CARTESIAN_POINT('',(127.67,-64.68,1.56)); +#494540 = LINE('',#494541,#494542); +#494541 = CARTESIAN_POINT('',(127.33,-64.68,1.56)); +#494542 = VECTOR('',#494543,1.); +#494543 = DIRECTION('',(1.,0.,0.)); +#494544 = ORIENTED_EDGE('',*,*,#494545,.T.); +#494545 = EDGE_CURVE('',#494538,#494546,#494548,.T.); +#494546 = VERTEX_POINT('',#494547); +#494547 = CARTESIAN_POINT('',(127.81,-64.54,1.56)); +#494548 = CIRCLE('',#494549,0.139999827126); +#494549 = AXIS2_PLACEMENT_3D('',#494550,#494551,#494552); +#494550 = CARTESIAN_POINT('',(127.67000017287,-64.54000017287,1.56)); +#494551 = DIRECTION('',(0.,0.,1.)); +#494552 = DIRECTION('',(-1.234820146735E-06,-0.999999999999,0.)); +#494553 = ORIENTED_EDGE('',*,*,#494554,.T.); +#494554 = EDGE_CURVE('',#494546,#494493,#494555,.T.); +#494555 = LINE('',#494556,#494557); +#494556 = CARTESIAN_POINT('',(127.81,-64.54,1.56)); +#494557 = VECTOR('',#494558,1.); +#494558 = DIRECTION('',(0.,1.,0.)); +#494559 = FACE_BOUND('',#494560,.F.); +#494560 = EDGE_LOOP('',(#494561,#494572,#494580,#494589,#494597,#494606, + #494614,#494623)); +#494561 = ORIENTED_EDGE('',*,*,#494562,.T.); +#494562 = EDGE_CURVE('',#494563,#494565,#494567,.T.); +#494563 = VERTEX_POINT('',#494564); +#494564 = CARTESIAN_POINT('',(122.8,-61.9375,1.56)); +#494565 = VERTEX_POINT('',#494566); +#494566 = CARTESIAN_POINT('',(122.6125,-61.75,1.56)); +#494567 = CIRCLE('',#494568,0.187498366229); +#494568 = AXIS2_PLACEMENT_3D('',#494569,#494570,#494571); +#494569 = CARTESIAN_POINT('',(122.61250163377,-61.93749836622,1.56)); +#494570 = DIRECTION('',(0.,0.,1.)); +#494571 = DIRECTION('',(0.999999999962,-8.713558392815E-06,0.)); +#494572 = ORIENTED_EDGE('',*,*,#494573,.T.); +#494573 = EDGE_CURVE('',#494565,#494574,#494576,.T.); +#494574 = VERTEX_POINT('',#494575); +#494575 = CARTESIAN_POINT('',(122.2375,-61.75,1.56)); +#494576 = LINE('',#494577,#494578); +#494577 = CARTESIAN_POINT('',(122.6125,-61.75,1.56)); +#494578 = VECTOR('',#494579,1.); +#494579 = DIRECTION('',(-1.,0.,0.)); +#494580 = ORIENTED_EDGE('',*,*,#494581,.T.); +#494581 = EDGE_CURVE('',#494574,#494582,#494584,.T.); +#494582 = VERTEX_POINT('',#494583); +#494583 = CARTESIAN_POINT('',(122.05,-61.9375,1.56)); +#494584 = CIRCLE('',#494585,0.187498366229); +#494585 = AXIS2_PLACEMENT_3D('',#494586,#494587,#494588); +#494586 = CARTESIAN_POINT('',(122.23749836622,-61.93749836622,1.56)); +#494587 = DIRECTION('',(0.,0.,1.)); +#494588 = DIRECTION('',(8.713558354919E-06,0.999999999962,-0.)); +#494589 = ORIENTED_EDGE('',*,*,#494590,.T.); +#494590 = EDGE_CURVE('',#494582,#494591,#494593,.T.); +#494591 = VERTEX_POINT('',#494592); +#494592 = CARTESIAN_POINT('',(122.05,-63.3625,1.56)); +#494593 = LINE('',#494594,#494595); +#494594 = CARTESIAN_POINT('',(122.05,-61.9375,1.56)); +#494595 = VECTOR('',#494596,1.); +#494596 = DIRECTION('',(0.,-1.,0.)); +#494597 = ORIENTED_EDGE('',*,*,#494598,.T.); +#494598 = EDGE_CURVE('',#494591,#494599,#494601,.T.); +#494599 = VERTEX_POINT('',#494600); +#494600 = CARTESIAN_POINT('',(122.2375,-63.55,1.56)); +#494601 = CIRCLE('',#494602,0.187498366229); +#494602 = AXIS2_PLACEMENT_3D('',#494603,#494604,#494605); +#494603 = CARTESIAN_POINT('',(122.23749836622,-63.36250163377,1.56)); +#494604 = DIRECTION('',(0.,0.,1.)); +#494605 = DIRECTION('',(-0.999999999962,8.713558468607E-06,0.)); +#494606 = ORIENTED_EDGE('',*,*,#494607,.T.); +#494607 = EDGE_CURVE('',#494599,#494608,#494610,.T.); +#494608 = VERTEX_POINT('',#494609); +#494609 = CARTESIAN_POINT('',(122.6125,-63.55,1.56)); +#494610 = LINE('',#494611,#494612); +#494611 = CARTESIAN_POINT('',(122.2375,-63.55,1.56)); +#494612 = VECTOR('',#494613,1.); +#494613 = DIRECTION('',(1.,0.,0.)); +#494614 = ORIENTED_EDGE('',*,*,#494615,.T.); +#494615 = EDGE_CURVE('',#494608,#494616,#494618,.T.); +#494616 = VERTEX_POINT('',#494617); +#494617 = CARTESIAN_POINT('',(122.8,-63.3625,1.56)); +#494618 = CIRCLE('',#494619,0.187498366229); +#494619 = AXIS2_PLACEMENT_3D('',#494620,#494621,#494622); +#494620 = CARTESIAN_POINT('',(122.61250163377,-63.36250163377,1.56)); +#494621 = DIRECTION('',(0.,0.,1.)); +#494622 = DIRECTION('',(-8.713558430712E-06,-0.999999999962,0.)); +#494623 = ORIENTED_EDGE('',*,*,#494624,.T.); +#494624 = EDGE_CURVE('',#494616,#494563,#494625,.T.); +#494625 = LINE('',#494626,#494627); +#494626 = CARTESIAN_POINT('',(122.8,-63.3625,1.56)); +#494627 = VECTOR('',#494628,1.); +#494628 = DIRECTION('',(0.,1.,0.)); +#494629 = FACE_BOUND('',#494630,.F.); +#494630 = EDGE_LOOP('',(#494631,#494642,#494650,#494659,#494667,#494676, + #494684,#494693)); +#494631 = ORIENTED_EDGE('',*,*,#494632,.T.); +#494632 = EDGE_CURVE('',#494633,#494635,#494637,.T.); +#494633 = VERTEX_POINT('',#494634); +#494634 = CARTESIAN_POINT('',(123.95,-61.9,1.56)); +#494635 = VERTEX_POINT('',#494636); +#494636 = CARTESIAN_POINT('',(123.8,-61.75,1.56)); +#494637 = CIRCLE('',#494638,0.150000058649); +#494638 = AXIS2_PLACEMENT_3D('',#494639,#494640,#494641); +#494639 = CARTESIAN_POINT('',(123.79999994135,-61.90000005864,1.56)); +#494640 = DIRECTION('',(0.,0.,1.)); +#494641 = DIRECTION('',(1.,3.909954563454E-07,-0.)); +#494642 = ORIENTED_EDGE('',*,*,#494643,.T.); +#494643 = EDGE_CURVE('',#494635,#494644,#494646,.T.); +#494644 = VERTEX_POINT('',#494645); +#494645 = CARTESIAN_POINT('',(123.5,-61.75,1.56)); +#494646 = LINE('',#494647,#494648); +#494647 = CARTESIAN_POINT('',(123.8,-61.75,1.56)); +#494648 = VECTOR('',#494649,1.); +#494649 = DIRECTION('',(-1.,0.,0.)); +#494650 = ORIENTED_EDGE('',*,*,#494651,.T.); +#494651 = EDGE_CURVE('',#494644,#494652,#494654,.T.); +#494652 = VERTEX_POINT('',#494653); +#494653 = CARTESIAN_POINT('',(123.35,-61.9,1.56)); +#494654 = CIRCLE('',#494655,0.150000058649); +#494655 = AXIS2_PLACEMENT_3D('',#494656,#494657,#494658); +#494656 = CARTESIAN_POINT('',(123.50000005864,-61.90000005864,1.56)); +#494657 = DIRECTION('',(0.,0.,1.)); +#494658 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#494659 = ORIENTED_EDGE('',*,*,#494660,.T.); +#494660 = EDGE_CURVE('',#494652,#494661,#494663,.T.); +#494661 = VERTEX_POINT('',#494662); +#494662 = CARTESIAN_POINT('',(123.35,-63.4,1.56)); +#494663 = LINE('',#494664,#494665); +#494664 = CARTESIAN_POINT('',(123.35,-61.9,1.56)); +#494665 = VECTOR('',#494666,1.); +#494666 = DIRECTION('',(0.,-1.,0.)); +#494667 = ORIENTED_EDGE('',*,*,#494668,.T.); +#494668 = EDGE_CURVE('',#494661,#494669,#494671,.T.); +#494669 = VERTEX_POINT('',#494670); +#494670 = CARTESIAN_POINT('',(123.5,-63.55,1.56)); +#494671 = CIRCLE('',#494672,0.150000058649); +#494672 = AXIS2_PLACEMENT_3D('',#494673,#494674,#494675); +#494673 = CARTESIAN_POINT('',(123.50000005864,-63.39999994135,1.56)); +#494674 = DIRECTION('',(0.,0.,1.)); +#494675 = DIRECTION('',(-1.,-3.909954563454E-07,0.)); +#494676 = ORIENTED_EDGE('',*,*,#494677,.T.); +#494677 = EDGE_CURVE('',#494669,#494678,#494680,.T.); +#494678 = VERTEX_POINT('',#494679); +#494679 = CARTESIAN_POINT('',(123.8,-63.55,1.56)); +#494680 = LINE('',#494681,#494682); +#494681 = CARTESIAN_POINT('',(123.5,-63.55,1.56)); +#494682 = VECTOR('',#494683,1.); +#494683 = DIRECTION('',(1.,0.,0.)); +#494684 = ORIENTED_EDGE('',*,*,#494685,.T.); +#494685 = EDGE_CURVE('',#494678,#494686,#494688,.T.); +#494686 = VERTEX_POINT('',#494687); +#494687 = CARTESIAN_POINT('',(123.95,-63.4,1.56)); +#494688 = CIRCLE('',#494689,0.150000058649); +#494689 = AXIS2_PLACEMENT_3D('',#494690,#494691,#494692); +#494690 = CARTESIAN_POINT('',(123.79999994135,-63.39999994135,1.56)); +#494691 = DIRECTION('',(0.,0.,1.)); +#494692 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#494693 = ORIENTED_EDGE('',*,*,#494694,.T.); +#494694 = EDGE_CURVE('',#494686,#494633,#494695,.T.); +#494695 = LINE('',#494696,#494697); +#494696 = CARTESIAN_POINT('',(123.95,-63.4,1.56)); +#494697 = VECTOR('',#494698,1.); +#494698 = DIRECTION('',(0.,1.,0.)); +#494699 = FACE_BOUND('',#494700,.F.); +#494700 = EDGE_LOOP('',(#494701,#494712,#494720,#494729,#494737,#494746, + #494754,#494763)); +#494701 = ORIENTED_EDGE('',*,*,#494702,.T.); +#494702 = EDGE_CURVE('',#494703,#494705,#494707,.T.); +#494703 = VERTEX_POINT('',#494704); +#494704 = CARTESIAN_POINT('',(125.25,-61.9375,1.56)); +#494705 = VERTEX_POINT('',#494706); +#494706 = CARTESIAN_POINT('',(125.0625,-61.75,1.56)); +#494707 = CIRCLE('',#494708,0.187498366229); +#494708 = AXIS2_PLACEMENT_3D('',#494709,#494710,#494711); +#494709 = CARTESIAN_POINT('',(125.06250163377,-61.93749836622,1.56)); +#494710 = DIRECTION('',(0.,0.,1.)); +#494711 = DIRECTION('',(0.999999999962,-8.713558392815E-06,0.)); +#494712 = ORIENTED_EDGE('',*,*,#494713,.T.); +#494713 = EDGE_CURVE('',#494705,#494714,#494716,.T.); +#494714 = VERTEX_POINT('',#494715); +#494715 = CARTESIAN_POINT('',(124.6875,-61.75,1.56)); +#494716 = LINE('',#494717,#494718); +#494717 = CARTESIAN_POINT('',(125.0625,-61.75,1.56)); +#494718 = VECTOR('',#494719,1.); +#494719 = DIRECTION('',(-1.,0.,0.)); +#494720 = ORIENTED_EDGE('',*,*,#494721,.T.); +#494721 = EDGE_CURVE('',#494714,#494722,#494724,.T.); +#494722 = VERTEX_POINT('',#494723); +#494723 = CARTESIAN_POINT('',(124.5,-61.9375,1.56)); +#494724 = CIRCLE('',#494725,0.187498366229); +#494725 = AXIS2_PLACEMENT_3D('',#494726,#494727,#494728); +#494726 = CARTESIAN_POINT('',(124.68749836622,-61.93749836622,1.56)); +#494727 = DIRECTION('',(0.,0.,1.)); +#494728 = DIRECTION('',(8.713558430711E-06,0.999999999962,-0.)); +#494729 = ORIENTED_EDGE('',*,*,#494730,.T.); +#494730 = EDGE_CURVE('',#494722,#494731,#494733,.T.); +#494731 = VERTEX_POINT('',#494732); +#494732 = CARTESIAN_POINT('',(124.5,-63.3625,1.56)); +#494733 = LINE('',#494734,#494735); +#494734 = CARTESIAN_POINT('',(124.5,-61.9375,1.56)); +#494735 = VECTOR('',#494736,1.); +#494736 = DIRECTION('',(0.,-1.,0.)); +#494737 = ORIENTED_EDGE('',*,*,#494738,.T.); +#494738 = EDGE_CURVE('',#494731,#494739,#494741,.T.); +#494739 = VERTEX_POINT('',#494740); +#494740 = CARTESIAN_POINT('',(124.6875,-63.55,1.56)); +#494741 = CIRCLE('',#494742,0.187498366229); +#494742 = AXIS2_PLACEMENT_3D('',#494743,#494744,#494745); +#494743 = CARTESIAN_POINT('',(124.68749836622,-63.36250163377,1.56)); +#494744 = DIRECTION('',(0.,0.,1.)); +#494745 = DIRECTION('',(-0.999999999962,8.713558468608E-06,0.)); +#494746 = ORIENTED_EDGE('',*,*,#494747,.T.); +#494747 = EDGE_CURVE('',#494739,#494748,#494750,.T.); +#494748 = VERTEX_POINT('',#494749); +#494749 = CARTESIAN_POINT('',(125.0625,-63.55,1.56)); +#494750 = LINE('',#494751,#494752); +#494751 = CARTESIAN_POINT('',(124.6875,-63.55,1.56)); +#494752 = VECTOR('',#494753,1.); +#494753 = DIRECTION('',(1.,0.,0.)); +#494754 = ORIENTED_EDGE('',*,*,#494755,.T.); +#494755 = EDGE_CURVE('',#494748,#494756,#494758,.T.); +#494756 = VERTEX_POINT('',#494757); +#494757 = CARTESIAN_POINT('',(125.25,-63.3625,1.56)); +#494758 = CIRCLE('',#494759,0.187498366229); +#494759 = AXIS2_PLACEMENT_3D('',#494760,#494761,#494762); +#494760 = CARTESIAN_POINT('',(125.06250163377,-63.36250163377,1.56)); +#494761 = DIRECTION('',(0.,0.,1.)); +#494762 = DIRECTION('',(-8.713558506503E-06,-0.999999999962,0.)); +#494763 = ORIENTED_EDGE('',*,*,#494764,.T.); +#494764 = EDGE_CURVE('',#494756,#494703,#494765,.T.); +#494765 = LINE('',#494766,#494767); +#494766 = CARTESIAN_POINT('',(125.25,-63.3625,1.56)); +#494767 = VECTOR('',#494768,1.); +#494768 = DIRECTION('',(0.,1.,0.)); +#494769 = FACE_BOUND('',#494770,.F.); +#494770 = EDGE_LOOP('',(#494771,#494782,#494790,#494799,#494807,#494816, + #494824,#494833)); +#494771 = ORIENTED_EDGE('',*,*,#494772,.T.); +#494772 = EDGE_CURVE('',#494773,#494775,#494777,.T.); +#494773 = VERTEX_POINT('',#494774); +#494774 = CARTESIAN_POINT('',(150.5,-61.9375,1.56)); +#494775 = VERTEX_POINT('',#494776); +#494776 = CARTESIAN_POINT('',(150.3125,-61.75,1.56)); +#494777 = CIRCLE('',#494778,0.187498366229); +#494778 = AXIS2_PLACEMENT_3D('',#494779,#494780,#494781); +#494779 = CARTESIAN_POINT('',(150.31250163377,-61.93749836622,1.56)); +#494780 = DIRECTION('',(0.,0.,1.)); +#494781 = DIRECTION('',(0.999999999962,-8.713558506504E-06,0.)); +#494782 = ORIENTED_EDGE('',*,*,#494783,.T.); +#494783 = EDGE_CURVE('',#494775,#494784,#494786,.T.); +#494784 = VERTEX_POINT('',#494785); +#494785 = CARTESIAN_POINT('',(149.9375,-61.75,1.56)); +#494786 = LINE('',#494787,#494788); +#494787 = CARTESIAN_POINT('',(150.3125,-61.75,1.56)); +#494788 = VECTOR('',#494789,1.); +#494789 = DIRECTION('',(-1.,0.,0.)); +#494790 = ORIENTED_EDGE('',*,*,#494791,.T.); +#494791 = EDGE_CURVE('',#494784,#494792,#494794,.T.); +#494792 = VERTEX_POINT('',#494793); +#494793 = CARTESIAN_POINT('',(149.75,-61.9375,1.56)); +#494794 = CIRCLE('',#494795,0.187498366229); +#494795 = AXIS2_PLACEMENT_3D('',#494796,#494797,#494798); +#494796 = CARTESIAN_POINT('',(149.93749836622,-61.93749836622,1.56)); +#494797 = DIRECTION('',(0.,0.,1.)); +#494798 = DIRECTION('',(8.713558582296E-06,0.999999999962,-0.)); +#494799 = ORIENTED_EDGE('',*,*,#494800,.T.); +#494800 = EDGE_CURVE('',#494792,#494801,#494803,.T.); +#494801 = VERTEX_POINT('',#494802); +#494802 = CARTESIAN_POINT('',(149.75,-63.3625,1.56)); +#494803 = LINE('',#494804,#494805); +#494804 = CARTESIAN_POINT('',(149.75,-61.9375,1.56)); +#494805 = VECTOR('',#494806,1.); +#494806 = DIRECTION('',(0.,-1.,0.)); +#494807 = ORIENTED_EDGE('',*,*,#494808,.T.); +#494808 = EDGE_CURVE('',#494801,#494809,#494811,.T.); +#494809 = VERTEX_POINT('',#494810); +#494810 = CARTESIAN_POINT('',(149.9375,-63.55,1.56)); +#494811 = CIRCLE('',#494812,0.187498366229); +#494812 = AXIS2_PLACEMENT_3D('',#494813,#494814,#494815); +#494813 = CARTESIAN_POINT('',(149.93749836622,-63.36250163377,1.56)); +#494814 = DIRECTION('',(0.,0.,1.)); +#494815 = DIRECTION('',(-0.999999999962,8.713558582296E-06,0.)); +#494816 = ORIENTED_EDGE('',*,*,#494817,.T.); +#494817 = EDGE_CURVE('',#494809,#494818,#494820,.T.); +#494818 = VERTEX_POINT('',#494819); +#494819 = CARTESIAN_POINT('',(150.3125,-63.55,1.56)); +#494820 = LINE('',#494821,#494822); +#494821 = CARTESIAN_POINT('',(149.9375,-63.55,1.56)); +#494822 = VECTOR('',#494823,1.); +#494823 = DIRECTION('',(1.,0.,0.)); +#494824 = ORIENTED_EDGE('',*,*,#494825,.T.); +#494825 = EDGE_CURVE('',#494818,#494826,#494828,.T.); +#494826 = VERTEX_POINT('',#494827); +#494827 = CARTESIAN_POINT('',(150.5,-63.3625,1.56)); +#494828 = CIRCLE('',#494829,0.187498366229); +#494829 = AXIS2_PLACEMENT_3D('',#494830,#494831,#494832); +#494830 = CARTESIAN_POINT('',(150.31250163377,-63.36250163377,1.56)); +#494831 = DIRECTION('',(0.,0.,1.)); +#494832 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#494833 = ORIENTED_EDGE('',*,*,#494834,.T.); +#494834 = EDGE_CURVE('',#494826,#494773,#494835,.T.); +#494835 = LINE('',#494836,#494837); +#494836 = CARTESIAN_POINT('',(150.5,-63.3625,1.56)); +#494837 = VECTOR('',#494838,1.); +#494838 = DIRECTION('',(0.,1.,0.)); +#494839 = FACE_BOUND('',#494840,.F.); +#494840 = EDGE_LOOP('',(#494841,#494852,#494860,#494869,#494877,#494886, + #494894,#494903)); +#494841 = ORIENTED_EDGE('',*,*,#494842,.T.); +#494842 = EDGE_CURVE('',#494843,#494845,#494847,.T.); +#494843 = VERTEX_POINT('',#494844); +#494844 = CARTESIAN_POINT('',(151.65,-61.9,1.56)); +#494845 = VERTEX_POINT('',#494846); +#494846 = CARTESIAN_POINT('',(151.5,-61.75,1.56)); +#494847 = CIRCLE('',#494848,0.150000058649); +#494848 = AXIS2_PLACEMENT_3D('',#494849,#494850,#494851); +#494849 = CARTESIAN_POINT('',(151.49999994135,-61.90000005864,1.56)); +#494850 = DIRECTION('',(0.,0.,1.)); +#494851 = DIRECTION('',(1.,3.909955037149E-07,-0.)); +#494852 = ORIENTED_EDGE('',*,*,#494853,.T.); +#494853 = EDGE_CURVE('',#494845,#494854,#494856,.T.); +#494854 = VERTEX_POINT('',#494855); +#494855 = CARTESIAN_POINT('',(151.2,-61.75,1.56)); +#494856 = LINE('',#494857,#494858); +#494857 = CARTESIAN_POINT('',(151.5,-61.75,1.56)); +#494858 = VECTOR('',#494859,1.); +#494859 = DIRECTION('',(-1.,0.,0.)); +#494860 = ORIENTED_EDGE('',*,*,#494861,.T.); +#494861 = EDGE_CURVE('',#494854,#494862,#494864,.T.); +#494862 = VERTEX_POINT('',#494863); +#494863 = CARTESIAN_POINT('',(151.05,-61.9,1.56)); +#494864 = CIRCLE('',#494865,0.150000058649); +#494865 = AXIS2_PLACEMENT_3D('',#494866,#494867,#494868); +#494866 = CARTESIAN_POINT('',(151.20000005864,-61.90000005864,1.56)); +#494867 = DIRECTION('',(0.,0.,1.)); +#494868 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#494869 = ORIENTED_EDGE('',*,*,#494870,.T.); +#494870 = EDGE_CURVE('',#494862,#494871,#494873,.T.); +#494871 = VERTEX_POINT('',#494872); +#494872 = CARTESIAN_POINT('',(151.05,-63.4,1.56)); +#494873 = LINE('',#494874,#494875); +#494874 = CARTESIAN_POINT('',(151.05,-61.9,1.56)); +#494875 = VECTOR('',#494876,1.); +#494876 = DIRECTION('',(0.,-1.,0.)); +#494877 = ORIENTED_EDGE('',*,*,#494878,.T.); +#494878 = EDGE_CURVE('',#494871,#494879,#494881,.T.); +#494879 = VERTEX_POINT('',#494880); +#494880 = CARTESIAN_POINT('',(151.2,-63.55,1.56)); +#494881 = CIRCLE('',#494882,0.150000058649); +#494882 = AXIS2_PLACEMENT_3D('',#494883,#494884,#494885); +#494883 = CARTESIAN_POINT('',(151.20000005864,-63.39999994135,1.56)); +#494884 = DIRECTION('',(0.,0.,1.)); +#494885 = DIRECTION('',(-1.,-3.909951247591E-07,0.)); +#494886 = ORIENTED_EDGE('',*,*,#494887,.T.); +#494887 = EDGE_CURVE('',#494879,#494888,#494890,.T.); +#494888 = VERTEX_POINT('',#494889); +#494889 = CARTESIAN_POINT('',(151.5,-63.55,1.56)); +#494890 = LINE('',#494891,#494892); +#494891 = CARTESIAN_POINT('',(151.2,-63.55,1.56)); +#494892 = VECTOR('',#494893,1.); +#494893 = DIRECTION('',(1.,0.,0.)); +#494894 = ORIENTED_EDGE('',*,*,#494895,.T.); +#494895 = EDGE_CURVE('',#494888,#494896,#494898,.T.); +#494896 = VERTEX_POINT('',#494897); +#494897 = CARTESIAN_POINT('',(151.65,-63.4,1.56)); +#494898 = CIRCLE('',#494899,0.150000058649); +#494899 = AXIS2_PLACEMENT_3D('',#494900,#494901,#494902); +#494900 = CARTESIAN_POINT('',(151.49999994135,-63.39999994135,1.56)); +#494901 = DIRECTION('',(0.,0.,1.)); +#494902 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#494903 = ORIENTED_EDGE('',*,*,#494904,.T.); +#494904 = EDGE_CURVE('',#494896,#494843,#494905,.T.); +#494905 = LINE('',#494906,#494907); +#494906 = CARTESIAN_POINT('',(151.65,-63.4,1.56)); +#494907 = VECTOR('',#494908,1.); +#494908 = DIRECTION('',(0.,1.,0.)); +#494909 = FACE_BOUND('',#494910,.F.); +#494910 = EDGE_LOOP('',(#494911,#494922,#494930,#494939,#494947,#494956, + #494964,#494973)); +#494911 = ORIENTED_EDGE('',*,*,#494912,.T.); +#494912 = EDGE_CURVE('',#494913,#494915,#494917,.T.); +#494913 = VERTEX_POINT('',#494914); +#494914 = CARTESIAN_POINT('',(152.95,-61.9375,1.56)); +#494915 = VERTEX_POINT('',#494916); +#494916 = CARTESIAN_POINT('',(152.7625,-61.75,1.56)); +#494917 = CIRCLE('',#494918,0.187498366229); +#494918 = AXIS2_PLACEMENT_3D('',#494919,#494920,#494921); +#494919 = CARTESIAN_POINT('',(152.76250163377,-61.93749836622,1.56)); +#494920 = DIRECTION('',(0.,0.,1.)); +#494921 = DIRECTION('',(0.999999999962,-8.713558506504E-06,0.)); +#494922 = ORIENTED_EDGE('',*,*,#494923,.T.); +#494923 = EDGE_CURVE('',#494915,#494924,#494926,.T.); +#494924 = VERTEX_POINT('',#494925); +#494925 = CARTESIAN_POINT('',(152.3875,-61.75,1.56)); +#494926 = LINE('',#494927,#494928); +#494927 = CARTESIAN_POINT('',(152.7625,-61.75,1.56)); +#494928 = VECTOR('',#494929,1.); +#494929 = DIRECTION('',(-1.,0.,0.)); +#494930 = ORIENTED_EDGE('',*,*,#494931,.T.); +#494931 = EDGE_CURVE('',#494924,#494932,#494934,.T.); +#494932 = VERTEX_POINT('',#494933); +#494933 = CARTESIAN_POINT('',(152.2,-61.9375,1.56)); +#494934 = CIRCLE('',#494935,0.187498366229); +#494935 = AXIS2_PLACEMENT_3D('',#494936,#494937,#494938); +#494936 = CARTESIAN_POINT('',(152.38749836622,-61.93749836622,1.56)); +#494937 = DIRECTION('',(0.,0.,1.)); +#494938 = DIRECTION('',(8.713558127542E-06,0.999999999962,-0.)); +#494939 = ORIENTED_EDGE('',*,*,#494940,.T.); +#494940 = EDGE_CURVE('',#494932,#494941,#494943,.T.); +#494941 = VERTEX_POINT('',#494942); +#494942 = CARTESIAN_POINT('',(152.2,-63.3625,1.56)); +#494943 = LINE('',#494944,#494945); +#494944 = CARTESIAN_POINT('',(152.2,-61.9375,1.56)); +#494945 = VECTOR('',#494946,1.); +#494946 = DIRECTION('',(0.,-1.,0.)); +#494947 = ORIENTED_EDGE('',*,*,#494948,.T.); +#494948 = EDGE_CURVE('',#494941,#494949,#494951,.T.); +#494949 = VERTEX_POINT('',#494950); +#494950 = CARTESIAN_POINT('',(152.3875,-63.55,1.56)); +#494951 = CIRCLE('',#494952,0.187498366229); +#494952 = AXIS2_PLACEMENT_3D('',#494953,#494954,#494955); +#494953 = CARTESIAN_POINT('',(152.38749836622,-63.36250163377,1.56)); +#494954 = DIRECTION('',(0.,0.,1.)); +#494955 = DIRECTION('',(-0.999999999962,8.713558354918E-06,0.)); +#494956 = ORIENTED_EDGE('',*,*,#494957,.T.); +#494957 = EDGE_CURVE('',#494949,#494958,#494960,.T.); +#494958 = VERTEX_POINT('',#494959); +#494959 = CARTESIAN_POINT('',(152.7625,-63.55,1.56)); +#494960 = LINE('',#494961,#494962); +#494961 = CARTESIAN_POINT('',(152.3875,-63.55,1.56)); +#494962 = VECTOR('',#494963,1.); +#494963 = DIRECTION('',(1.,0.,0.)); +#494964 = ORIENTED_EDGE('',*,*,#494965,.T.); +#494965 = EDGE_CURVE('',#494958,#494966,#494968,.T.); +#494966 = VERTEX_POINT('',#494967); +#494967 = CARTESIAN_POINT('',(152.95,-63.3625,1.56)); +#494968 = CIRCLE('',#494969,0.187498366229); +#494969 = AXIS2_PLACEMENT_3D('',#494970,#494971,#494972); +#494970 = CARTESIAN_POINT('',(152.76250163377,-63.36250163377,1.56)); +#494971 = DIRECTION('',(0.,0.,1.)); +#494972 = DIRECTION('',(-8.713558582296E-06,-0.999999999962,0.)); +#494973 = ORIENTED_EDGE('',*,*,#494974,.T.); +#494974 = EDGE_CURVE('',#494966,#494913,#494975,.T.); +#494975 = LINE('',#494976,#494977); +#494976 = CARTESIAN_POINT('',(152.95,-63.3625,1.56)); +#494977 = VECTOR('',#494978,1.); +#494978 = DIRECTION('',(0.,1.,0.)); +#494979 = FACE_BOUND('',#494980,.F.); +#494980 = EDGE_LOOP('',(#494981)); +#494981 = ORIENTED_EDGE('',*,*,#494982,.T.); +#494982 = EDGE_CURVE('',#494983,#494983,#494985,.T.); +#494983 = VERTEX_POINT('',#494984); +#494984 = CARTESIAN_POINT('',(121.975,-61.75,1.56)); +#494985 = CIRCLE('',#494986,0.45); +#494986 = AXIS2_PLACEMENT_3D('',#494987,#494988,#494989); +#494987 = CARTESIAN_POINT('',(121.525,-61.75,1.56)); +#494988 = DIRECTION('',(0.,0.,1.)); +#494989 = DIRECTION('',(1.,0.,-0.)); +#494990 = FACE_BOUND('',#494991,.F.); +#494991 = EDGE_LOOP('',(#494992)); +#494992 = ORIENTED_EDGE('',*,*,#494993,.T.); +#494993 = EDGE_CURVE('',#494994,#494994,#494996,.T.); +#494994 = VERTEX_POINT('',#494995); +#494995 = CARTESIAN_POINT('',(126.225,-61.75,1.56)); +#494996 = CIRCLE('',#494997,0.45); +#494997 = AXIS2_PLACEMENT_3D('',#494998,#494999,#495000); +#494998 = CARTESIAN_POINT('',(125.775,-61.75,1.56)); +#494999 = DIRECTION('',(0.,0.,1.)); +#495000 = DIRECTION('',(1.,0.,-0.)); +#495001 = FACE_BOUND('',#495002,.F.); +#495002 = EDGE_LOOP('',(#495003)); +#495003 = ORIENTED_EDGE('',*,*,#495004,.T.); +#495004 = EDGE_CURVE('',#495005,#495005,#495007,.T.); +#495005 = VERTEX_POINT('',#495006); +#495006 = CARTESIAN_POINT('',(149.675,-61.75,1.56)); +#495007 = CIRCLE('',#495008,0.45); +#495008 = AXIS2_PLACEMENT_3D('',#495009,#495010,#495011); +#495009 = CARTESIAN_POINT('',(149.225,-61.75,1.56)); +#495010 = DIRECTION('',(0.,0.,1.)); +#495011 = DIRECTION('',(1.,0.,-0.)); +#495012 = FACE_BOUND('',#495013,.F.); +#495013 = EDGE_LOOP('',(#495014)); +#495014 = ORIENTED_EDGE('',*,*,#495015,.T.); +#495015 = EDGE_CURVE('',#495016,#495016,#495018,.T.); +#495016 = VERTEX_POINT('',#495017); +#495017 = CARTESIAN_POINT('',(153.925,-61.75,1.56)); +#495018 = CIRCLE('',#495019,0.45); +#495019 = AXIS2_PLACEMENT_3D('',#495020,#495021,#495022); +#495020 = CARTESIAN_POINT('',(153.475,-61.75,1.56)); +#495021 = DIRECTION('',(0.,0.,1.)); +#495022 = DIRECTION('',(1.,0.,-0.)); +#495023 = FACE_BOUND('',#495024,.F.); +#495024 = EDGE_LOOP('',(#495025,#495036,#495044,#495053,#495061,#495070, + #495078,#495087)); +#495025 = ORIENTED_EDGE('',*,*,#495026,.T.); +#495026 = EDGE_CURVE('',#495027,#495029,#495031,.T.); +#495027 = VERTEX_POINT('',#495028); +#495028 = CARTESIAN_POINT('',(122.45,-60.475,1.56)); +#495029 = VERTEX_POINT('',#495030); +#495030 = CARTESIAN_POINT('',(122.225,-60.25,1.56)); +#495031 = CIRCLE('',#495032,0.225000087974); +#495032 = AXIS2_PLACEMENT_3D('',#495033,#495034,#495035); +#495033 = CARTESIAN_POINT('',(122.22499991202,-60.47500008797,1.56)); +#495034 = DIRECTION('',(0.,0.,1.)); +#495035 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#495036 = ORIENTED_EDGE('',*,*,#495037,.T.); +#495037 = EDGE_CURVE('',#495029,#495038,#495040,.T.); +#495038 = VERTEX_POINT('',#495039); +#495039 = CARTESIAN_POINT('',(121.375,-60.25,1.56)); +#495040 = LINE('',#495041,#495042); +#495041 = CARTESIAN_POINT('',(122.225,-60.25,1.56)); +#495042 = VECTOR('',#495043,1.); +#495043 = DIRECTION('',(-1.,0.,0.)); +#495044 = ORIENTED_EDGE('',*,*,#495045,.T.); +#495045 = EDGE_CURVE('',#495038,#495046,#495048,.T.); +#495046 = VERTEX_POINT('',#495047); +#495047 = CARTESIAN_POINT('',(121.15,-60.475,1.56)); +#495048 = CIRCLE('',#495049,0.225000087974); +#495049 = AXIS2_PLACEMENT_3D('',#495050,#495051,#495052); +#495050 = CARTESIAN_POINT('',(121.37500008797,-60.47500008797,1.56)); +#495051 = DIRECTION('',(0.,0.,1.)); +#495052 = DIRECTION('',(-3.909953458167E-07,1.,0.)); +#495053 = ORIENTED_EDGE('',*,*,#495054,.T.); +#495054 = EDGE_CURVE('',#495046,#495055,#495057,.T.); +#495055 = VERTEX_POINT('',#495056); +#495056 = CARTESIAN_POINT('',(121.15,-60.925,1.56)); +#495057 = LINE('',#495058,#495059); +#495058 = CARTESIAN_POINT('',(121.15,-60.475,1.56)); +#495059 = VECTOR('',#495060,1.); +#495060 = DIRECTION('',(0.,-1.,0.)); +#495061 = ORIENTED_EDGE('',*,*,#495062,.T.); +#495062 = EDGE_CURVE('',#495055,#495063,#495065,.T.); +#495063 = VERTEX_POINT('',#495064); +#495064 = CARTESIAN_POINT('',(121.375,-61.15,1.56)); +#495065 = CIRCLE('',#495066,0.225000087974); +#495066 = AXIS2_PLACEMENT_3D('',#495067,#495068,#495069); +#495067 = CARTESIAN_POINT('',(121.37500008797,-60.92499991202,1.56)); +#495068 = DIRECTION('',(0.,0.,1.)); +#495069 = DIRECTION('',(-1.,-3.90995314237E-07,0.)); +#495070 = ORIENTED_EDGE('',*,*,#495071,.T.); +#495071 = EDGE_CURVE('',#495063,#495072,#495074,.T.); +#495072 = VERTEX_POINT('',#495073); +#495073 = CARTESIAN_POINT('',(122.225,-61.15,1.56)); +#495074 = LINE('',#495075,#495076); +#495075 = CARTESIAN_POINT('',(121.375,-61.15,1.56)); +#495076 = VECTOR('',#495077,1.); +#495077 = DIRECTION('',(1.,0.,0.)); +#495078 = ORIENTED_EDGE('',*,*,#495079,.T.); +#495079 = EDGE_CURVE('',#495072,#495080,#495082,.T.); +#495080 = VERTEX_POINT('',#495081); +#495081 = CARTESIAN_POINT('',(122.45,-60.925,1.56)); +#495082 = CIRCLE('',#495083,0.225000087974); +#495083 = AXIS2_PLACEMENT_3D('',#495084,#495085,#495086); +#495084 = CARTESIAN_POINT('',(122.22499991202,-60.92499991202,1.56)); +#495085 = DIRECTION('',(0.,0.,1.)); +#495086 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#495087 = ORIENTED_EDGE('',*,*,#495088,.T.); +#495088 = EDGE_CURVE('',#495080,#495027,#495089,.T.); +#495089 = LINE('',#495090,#495091); +#495090 = CARTESIAN_POINT('',(122.45,-60.925,1.56)); +#495091 = VECTOR('',#495092,1.); +#495092 = DIRECTION('',(0.,1.,0.)); +#495093 = FACE_BOUND('',#495094,.F.); +#495094 = EDGE_LOOP('',(#495095,#495106,#495114,#495123,#495131,#495140, + #495148,#495157)); +#495095 = ORIENTED_EDGE('',*,*,#495096,.T.); +#495096 = EDGE_CURVE('',#495097,#495099,#495101,.T.); +#495097 = VERTEX_POINT('',#495098); +#495098 = CARTESIAN_POINT('',(126.15,-60.475,1.56)); +#495099 = VERTEX_POINT('',#495100); +#495100 = CARTESIAN_POINT('',(125.925,-60.25,1.56)); +#495101 = CIRCLE('',#495102,0.225000087974); +#495102 = AXIS2_PLACEMENT_3D('',#495103,#495104,#495105); +#495103 = CARTESIAN_POINT('',(125.92499991202,-60.47500008797,1.56)); +#495104 = DIRECTION('',(0.,0.,1.)); +#495105 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#495106 = ORIENTED_EDGE('',*,*,#495107,.T.); +#495107 = EDGE_CURVE('',#495099,#495108,#495110,.T.); +#495108 = VERTEX_POINT('',#495109); +#495109 = CARTESIAN_POINT('',(125.075,-60.25,1.56)); +#495110 = LINE('',#495111,#495112); +#495111 = CARTESIAN_POINT('',(125.925,-60.25,1.56)); +#495112 = VECTOR('',#495113,1.); +#495113 = DIRECTION('',(-1.,0.,0.)); +#495114 = ORIENTED_EDGE('',*,*,#495115,.T.); +#495115 = EDGE_CURVE('',#495108,#495116,#495118,.T.); +#495116 = VERTEX_POINT('',#495117); +#495117 = CARTESIAN_POINT('',(124.85,-60.475,1.56)); +#495118 = CIRCLE('',#495119,0.225000087974); +#495119 = AXIS2_PLACEMENT_3D('',#495120,#495121,#495122); +#495120 = CARTESIAN_POINT('',(125.07500008797,-60.47500008797,1.56)); +#495121 = DIRECTION('',(0.,0.,1.)); +#495122 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#495123 = ORIENTED_EDGE('',*,*,#495124,.T.); +#495124 = EDGE_CURVE('',#495116,#495125,#495127,.T.); +#495125 = VERTEX_POINT('',#495126); +#495126 = CARTESIAN_POINT('',(124.85,-60.925,1.56)); +#495127 = LINE('',#495128,#495129); +#495128 = CARTESIAN_POINT('',(124.85,-60.475,1.56)); +#495129 = VECTOR('',#495130,1.); +#495130 = DIRECTION('',(0.,-1.,0.)); +#495131 = ORIENTED_EDGE('',*,*,#495132,.T.); +#495132 = EDGE_CURVE('',#495125,#495133,#495135,.T.); +#495133 = VERTEX_POINT('',#495134); +#495134 = CARTESIAN_POINT('',(125.075,-61.15,1.56)); +#495135 = CIRCLE('',#495136,0.225000087974); +#495136 = AXIS2_PLACEMENT_3D('',#495137,#495138,#495139); +#495137 = CARTESIAN_POINT('',(125.07500008797,-60.92499991202,1.56)); +#495138 = DIRECTION('',(0.,0.,1.)); +#495139 = DIRECTION('',(-1.,-3.909954405556E-07,0.)); +#495140 = ORIENTED_EDGE('',*,*,#495141,.T.); +#495141 = EDGE_CURVE('',#495133,#495142,#495144,.T.); +#495142 = VERTEX_POINT('',#495143); +#495143 = CARTESIAN_POINT('',(125.925,-61.15,1.56)); +#495144 = LINE('',#495145,#495146); +#495145 = CARTESIAN_POINT('',(125.075,-61.15,1.56)); +#495146 = VECTOR('',#495147,1.); +#495147 = DIRECTION('',(1.,0.,0.)); +#495148 = ORIENTED_EDGE('',*,*,#495149,.T.); +#495149 = EDGE_CURVE('',#495142,#495150,#495152,.T.); +#495150 = VERTEX_POINT('',#495151); +#495151 = CARTESIAN_POINT('',(126.15,-60.925,1.56)); +#495152 = CIRCLE('',#495153,0.225000087974); +#495153 = AXIS2_PLACEMENT_3D('',#495154,#495155,#495156); +#495154 = CARTESIAN_POINT('',(125.92499991202,-60.92499991202,1.56)); +#495155 = DIRECTION('',(0.,0.,1.)); +#495156 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#495157 = ORIENTED_EDGE('',*,*,#495158,.T.); +#495158 = EDGE_CURVE('',#495150,#495097,#495159,.T.); +#495159 = LINE('',#495160,#495161); +#495160 = CARTESIAN_POINT('',(126.15,-60.925,1.56)); +#495161 = VECTOR('',#495162,1.); +#495162 = DIRECTION('',(0.,1.,0.)); +#495163 = FACE_BOUND('',#495164,.F.); +#495164 = EDGE_LOOP('',(#495165,#495176,#495184,#495193,#495201,#495210, + #495218,#495227)); +#495165 = ORIENTED_EDGE('',*,*,#495166,.T.); +#495166 = EDGE_CURVE('',#495167,#495169,#495171,.T.); +#495167 = VERTEX_POINT('',#495168); +#495168 = CARTESIAN_POINT('',(150.15,-60.475,1.56)); +#495169 = VERTEX_POINT('',#495170); +#495170 = CARTESIAN_POINT('',(149.925,-60.25,1.56)); +#495171 = CIRCLE('',#495172,0.225000087974); +#495172 = AXIS2_PLACEMENT_3D('',#495173,#495174,#495175); +#495173 = CARTESIAN_POINT('',(149.92499991202,-60.47500008797,1.56)); +#495174 = DIRECTION('',(0.,0.,1.)); +#495175 = DIRECTION('',(1.,3.90995314237E-07,-0.)); +#495176 = ORIENTED_EDGE('',*,*,#495177,.T.); +#495177 = EDGE_CURVE('',#495169,#495178,#495180,.T.); +#495178 = VERTEX_POINT('',#495179); +#495179 = CARTESIAN_POINT('',(149.075,-60.25,1.56)); +#495180 = LINE('',#495181,#495182); +#495181 = CARTESIAN_POINT('',(149.925,-60.25,1.56)); +#495182 = VECTOR('',#495183,1.); +#495183 = DIRECTION('',(-1.,0.,0.)); +#495184 = ORIENTED_EDGE('',*,*,#495185,.T.); +#495185 = EDGE_CURVE('',#495178,#495186,#495188,.T.); +#495186 = VERTEX_POINT('',#495187); +#495187 = CARTESIAN_POINT('',(148.85,-60.475,1.56)); +#495188 = CIRCLE('',#495189,0.225000087974); +#495189 = AXIS2_PLACEMENT_3D('',#495190,#495191,#495192); +#495190 = CARTESIAN_POINT('',(149.07500008797,-60.47500008797,1.56)); +#495191 = DIRECTION('',(0.,0.,1.)); +#495192 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#495193 = ORIENTED_EDGE('',*,*,#495194,.T.); +#495194 = EDGE_CURVE('',#495186,#495195,#495197,.T.); +#495195 = VERTEX_POINT('',#495196); +#495196 = CARTESIAN_POINT('',(148.85,-60.925,1.56)); +#495197 = LINE('',#495198,#495199); +#495198 = CARTESIAN_POINT('',(148.85,-60.475,1.56)); +#495199 = VECTOR('',#495200,1.); +#495200 = DIRECTION('',(0.,-1.,0.)); +#495201 = ORIENTED_EDGE('',*,*,#495202,.T.); +#495202 = EDGE_CURVE('',#495195,#495203,#495205,.T.); +#495203 = VERTEX_POINT('',#495204); +#495204 = CARTESIAN_POINT('',(149.075,-61.15,1.56)); +#495205 = CIRCLE('',#495206,0.225000087974); +#495206 = AXIS2_PLACEMENT_3D('',#495207,#495208,#495209); +#495207 = CARTESIAN_POINT('',(149.07500008797,-60.92499991202,1.56)); +#495208 = DIRECTION('',(0.,0.,1.)); +#495209 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#495210 = ORIENTED_EDGE('',*,*,#495211,.T.); +#495211 = EDGE_CURVE('',#495203,#495212,#495214,.T.); +#495212 = VERTEX_POINT('',#495213); +#495213 = CARTESIAN_POINT('',(149.925,-61.15,1.56)); +#495214 = LINE('',#495215,#495216); +#495215 = CARTESIAN_POINT('',(149.075,-61.15,1.56)); +#495216 = VECTOR('',#495217,1.); +#495217 = DIRECTION('',(1.,0.,0.)); +#495218 = ORIENTED_EDGE('',*,*,#495219,.T.); +#495219 = EDGE_CURVE('',#495212,#495220,#495222,.T.); +#495220 = VERTEX_POINT('',#495221); +#495221 = CARTESIAN_POINT('',(150.15,-60.925,1.56)); +#495222 = CIRCLE('',#495223,0.225000087974); +#495223 = AXIS2_PLACEMENT_3D('',#495224,#495225,#495226); +#495224 = CARTESIAN_POINT('',(149.92499991202,-60.92499991202,1.56)); +#495225 = DIRECTION('',(0.,0.,1.)); +#495226 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#495227 = ORIENTED_EDGE('',*,*,#495228,.T.); +#495228 = EDGE_CURVE('',#495220,#495167,#495229,.T.); +#495229 = LINE('',#495230,#495231); +#495230 = CARTESIAN_POINT('',(150.15,-60.925,1.56)); +#495231 = VECTOR('',#495232,1.); +#495232 = DIRECTION('',(0.,1.,0.)); +#495233 = FACE_BOUND('',#495234,.F.); +#495234 = EDGE_LOOP('',(#495235,#495246,#495254,#495263,#495271,#495280, + #495288,#495297)); +#495235 = ORIENTED_EDGE('',*,*,#495236,.T.); +#495236 = EDGE_CURVE('',#495237,#495239,#495241,.T.); +#495237 = VERTEX_POINT('',#495238); +#495238 = CARTESIAN_POINT('',(153.85,-60.475,1.56)); +#495239 = VERTEX_POINT('',#495240); +#495240 = CARTESIAN_POINT('',(153.625,-60.25,1.56)); +#495241 = CIRCLE('',#495242,0.225000087974); +#495242 = AXIS2_PLACEMENT_3D('',#495243,#495244,#495245); +#495243 = CARTESIAN_POINT('',(153.62499991202,-60.47500008797,1.56)); +#495244 = DIRECTION('',(0.,0.,1.)); +#495245 = DIRECTION('',(1.,3.90995314237E-07,-0.)); +#495246 = ORIENTED_EDGE('',*,*,#495247,.T.); +#495247 = EDGE_CURVE('',#495239,#495248,#495250,.T.); +#495248 = VERTEX_POINT('',#495249); +#495249 = CARTESIAN_POINT('',(152.775,-60.25,1.56)); +#495250 = LINE('',#495251,#495252); +#495251 = CARTESIAN_POINT('',(153.625,-60.25,1.56)); +#495252 = VECTOR('',#495253,1.); +#495253 = DIRECTION('',(-1.,0.,0.)); +#495254 = ORIENTED_EDGE('',*,*,#495255,.T.); +#495255 = EDGE_CURVE('',#495248,#495256,#495258,.T.); +#495256 = VERTEX_POINT('',#495257); +#495257 = CARTESIAN_POINT('',(152.55,-60.475,1.56)); +#495258 = CIRCLE('',#495259,0.225000087974); +#495259 = AXIS2_PLACEMENT_3D('',#495260,#495261,#495262); +#495260 = CARTESIAN_POINT('',(152.77500008797,-60.47500008797,1.56)); +#495261 = DIRECTION('',(0.,0.,1.)); +#495262 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#495263 = ORIENTED_EDGE('',*,*,#495264,.T.); +#495264 = EDGE_CURVE('',#495256,#495265,#495267,.T.); +#495265 = VERTEX_POINT('',#495266); +#495266 = CARTESIAN_POINT('',(152.55,-60.925,1.56)); +#495267 = LINE('',#495268,#495269); +#495268 = CARTESIAN_POINT('',(152.55,-60.475,1.56)); +#495269 = VECTOR('',#495270,1.); +#495270 = DIRECTION('',(0.,-1.,0.)); +#495271 = ORIENTED_EDGE('',*,*,#495272,.T.); +#495272 = EDGE_CURVE('',#495265,#495273,#495275,.T.); +#495273 = VERTEX_POINT('',#495274); +#495274 = CARTESIAN_POINT('',(152.775,-61.15,1.56)); +#495275 = CIRCLE('',#495276,0.225000087974); +#495276 = AXIS2_PLACEMENT_3D('',#495277,#495278,#495279); +#495277 = CARTESIAN_POINT('',(152.77500008797,-60.92499991202,1.56)); +#495278 = DIRECTION('',(0.,0.,1.)); +#495279 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#495280 = ORIENTED_EDGE('',*,*,#495281,.T.); +#495281 = EDGE_CURVE('',#495273,#495282,#495284,.T.); +#495282 = VERTEX_POINT('',#495283); +#495283 = CARTESIAN_POINT('',(153.625,-61.15,1.56)); +#495284 = LINE('',#495285,#495286); +#495285 = CARTESIAN_POINT('',(152.775,-61.15,1.56)); +#495286 = VECTOR('',#495287,1.); +#495287 = DIRECTION('',(1.,0.,0.)); +#495288 = ORIENTED_EDGE('',*,*,#495289,.T.); +#495289 = EDGE_CURVE('',#495282,#495290,#495292,.T.); +#495290 = VERTEX_POINT('',#495291); +#495291 = CARTESIAN_POINT('',(153.85,-60.925,1.56)); +#495292 = CIRCLE('',#495293,0.225000087974); +#495293 = AXIS2_PLACEMENT_3D('',#495294,#495295,#495296); +#495294 = CARTESIAN_POINT('',(153.62499991202,-60.92499991202,1.56)); +#495295 = DIRECTION('',(0.,0.,1.)); +#495296 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#495297 = ORIENTED_EDGE('',*,*,#495298,.T.); +#495298 = EDGE_CURVE('',#495290,#495237,#495299,.T.); +#495299 = LINE('',#495300,#495301); +#495300 = CARTESIAN_POINT('',(153.85,-60.925,1.56)); +#495301 = VECTOR('',#495302,1.); +#495302 = DIRECTION('',(0.,1.,0.)); +#495303 = PLANE('',#495304); +#495304 = AXIS2_PLACEMENT_3D('',#495305,#495306,#495307); +#495305 = CARTESIAN_POINT('',(0.,0.,1.56)); +#495306 = DIRECTION('',(0.,0.,1.)); +#495307 = DIRECTION('',(1.,0.,-0.)); +#495308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#495312)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#495309,#495310,#495311)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#495309 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#495310 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#495311 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#495312 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#495309, + 'distance_accuracy_value','confusion accuracy'); +#495313 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#495314,#495316); +#495314 = ( REPRESENTATION_RELATIONSHIP('','',#484112,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#495315) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#495315 = ITEM_DEFINED_TRANSFORMATION('','',#11,#375); +#495316 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #495317); +#495317 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('117','=>[0:1:1:56]','',#5, + #484107,$); +#495318 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#484109)); +#495319 = SHAPE_DEFINITION_REPRESENTATION(#495320,#495326); +#495320 = PRODUCT_DEFINITION_SHAPE('','',#495321); +#495321 = PRODUCT_DEFINITION('design','',#495322,#495325); +#495322 = PRODUCT_DEFINITION_FORMATION('','',#495323); +#495323 = PRODUCT('snips_controller-unsaved-export-kiHHnP_soldermask', + 'snips_controller-unsaved-export-kiHHnP_soldermask','',(#495324)); +#495324 = PRODUCT_CONTEXT('',#2,'mechanical'); +#495325 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#495326 = MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#11,#495327),#503653 + ); +#495327 = SHELL_BASED_SURFACE_MODEL('',(#495328)); +#495328 = OPEN_SHELL('',(#495329)); +#495329 = ADVANCED_FACE('',(#495330,#495364,#495400,#495436,#495447, + #495458,#495469,#495480,#495550,#495620,#495656,#495692,#495703, + #495714,#495725,#495736,#495747,#495758,#495769,#495780,#495791, + #495802,#495813,#495824,#495894,#495964,#496034,#496104,#496174, + #496244,#496314,#496384,#496454,#496524,#496535,#496546,#496557, + #496568,#496579,#496590,#496601,#496612,#496623,#496634,#496704, + #496774,#496844,#496914,#496984,#497054,#497124,#497194,#497264, + #497334,#497404,#497474,#497544,#497614,#497684,#497754,#497824, + #497894,#497964,#498034,#498104,#498174,#498244,#498314,#498412, + #498510,#498580,#498678,#498776,#498846,#498944,#499042,#499112, + #499210,#499308,#499378,#499448,#499546,#499644,#499714,#499784, + #499854,#499924,#499994,#500064,#500134,#500204,#500274,#500344, + #500414,#500484,#500554,#500624,#500694,#500764,#500798,#500832, + #500902,#500972,#501042,#501112,#501182,#501252,#501322,#501333, + #501344,#501414,#501484,#501495,#501506,#501517,#501528,#501539, + #501550,#501561,#501572,#501583,#501594,#501605,#501616,#501627, + #501638,#501649,#501660,#501671,#501682,#501693,#501704,#501715, + #501726,#501796,#501866,#501936,#502006,#502076,#502146,#502216, + #502252,#502322,#502392,#502462,#502532,#502602,#502672,#502742, + #502812,#502882,#502952,#503022,#503092,#503162,#503232,#503302, + #503372,#503442,#503512,#503523,#503534,#503604,#503615,#503626, + #503637),#503648,.T.); +#495330 = FACE_BOUND('',#495331,.T.); +#495331 = EDGE_LOOP('',(#495332,#495342,#495350,#495358)); +#495332 = ORIENTED_EDGE('',*,*,#495333,.T.); +#495333 = EDGE_CURVE('',#495334,#495336,#495338,.T.); +#495334 = VERTEX_POINT('',#495335); +#495335 = CARTESIAN_POINT('',(120.,-159.9,-5.E-02)); +#495336 = VERTEX_POINT('',#495337); +#495337 = CARTESIAN_POINT('',(120.,-60.,-5.E-02)); +#495338 = LINE('',#495339,#495340); +#495339 = CARTESIAN_POINT('',(120.,-159.9,-5.E-02)); +#495340 = VECTOR('',#495341,1.); +#495341 = DIRECTION('',(0.,1.,0.)); +#495342 = ORIENTED_EDGE('',*,*,#495343,.T.); +#495343 = EDGE_CURVE('',#495336,#495344,#495346,.T.); +#495344 = VERTEX_POINT('',#495345); +#495345 = CARTESIAN_POINT('',(155.,-60.,-5.E-02)); +#495346 = LINE('',#495347,#495348); +#495347 = CARTESIAN_POINT('',(120.,-60.,-5.E-02)); +#495348 = VECTOR('',#495349,1.); +#495349 = DIRECTION('',(1.,0.,0.)); +#495350 = ORIENTED_EDGE('',*,*,#495351,.T.); +#495351 = EDGE_CURVE('',#495344,#495352,#495354,.T.); +#495352 = VERTEX_POINT('',#495353); +#495353 = CARTESIAN_POINT('',(155.,-159.9,-5.E-02)); +#495354 = LINE('',#495355,#495356); +#495355 = CARTESIAN_POINT('',(155.,-60.,-5.E-02)); +#495356 = VECTOR('',#495357,1.); +#495357 = DIRECTION('',(0.,-1.,0.)); +#495358 = ORIENTED_EDGE('',*,*,#495359,.T.); +#495359 = EDGE_CURVE('',#495352,#495334,#495360,.T.); +#495360 = LINE('',#495361,#495362); +#495361 = CARTESIAN_POINT('',(155.,-159.9,-5.E-02)); +#495362 = VECTOR('',#495363,1.); +#495363 = DIRECTION('',(-1.,0.,0.)); +#495364 = FACE_BOUND('',#495365,.T.); +#495365 = EDGE_LOOP('',(#495366,#495377,#495385,#495394)); +#495366 = ORIENTED_EDGE('',*,*,#495367,.T.); +#495367 = EDGE_CURVE('',#495368,#495370,#495372,.T.); +#495368 = VERTEX_POINT('',#495369); +#495369 = CARTESIAN_POINT('',(132.68,-158.45,-5.E-02)); +#495370 = VERTEX_POINT('',#495371); +#495371 = CARTESIAN_POINT('',(133.68,-158.45,-5.E-02)); +#495372 = CIRCLE('',#495373,0.5); +#495373 = AXIS2_PLACEMENT_3D('',#495374,#495375,#495376); +#495374 = CARTESIAN_POINT('',(133.18,-158.4499995566,-5.E-02)); +#495375 = DIRECTION('',(0.,0.,1.)); +#495376 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#495377 = ORIENTED_EDGE('',*,*,#495378,.T.); +#495378 = EDGE_CURVE('',#495370,#495379,#495381,.T.); +#495379 = VERTEX_POINT('',#495380); +#495380 = CARTESIAN_POINT('',(133.68,-157.85,-5.E-02)); +#495381 = LINE('',#495382,#495383); +#495382 = CARTESIAN_POINT('',(133.68,-158.45,-5.E-02)); +#495383 = VECTOR('',#495384,1.); +#495384 = DIRECTION('',(0.,1.,0.)); +#495385 = ORIENTED_EDGE('',*,*,#495386,.T.); +#495386 = EDGE_CURVE('',#495379,#495387,#495389,.T.); +#495387 = VERTEX_POINT('',#495388); +#495388 = CARTESIAN_POINT('',(132.68,-157.85,-5.E-02)); +#495389 = CIRCLE('',#495390,0.500000000001); +#495390 = AXIS2_PLACEMENT_3D('',#495391,#495392,#495393); +#495391 = CARTESIAN_POINT('',(133.18,-157.8499991518,-5.E-02)); +#495392 = DIRECTION('',(0.,0.,1.)); +#495393 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#495394 = ORIENTED_EDGE('',*,*,#495395,.T.); +#495395 = EDGE_CURVE('',#495387,#495368,#495396,.T.); +#495396 = LINE('',#495397,#495398); +#495397 = CARTESIAN_POINT('',(132.68,-157.85,-5.E-02)); +#495398 = VECTOR('',#495399,1.); +#495399 = DIRECTION('',(0.,-1.,0.)); +#495400 = FACE_BOUND('',#495401,.T.); +#495401 = EDGE_LOOP('',(#495402,#495413,#495421,#495430)); +#495402 = ORIENTED_EDGE('',*,*,#495403,.T.); +#495403 = EDGE_CURVE('',#495404,#495406,#495408,.T.); +#495404 = VERTEX_POINT('',#495405); +#495405 = CARTESIAN_POINT('',(141.32,-158.45,-5.E-02)); +#495406 = VERTEX_POINT('',#495407); +#495407 = CARTESIAN_POINT('',(142.32,-158.45,-5.E-02)); +#495408 = CIRCLE('',#495409,0.5); +#495409 = AXIS2_PLACEMENT_3D('',#495410,#495411,#495412); +#495410 = CARTESIAN_POINT('',(141.82,-158.4499995566,-5.E-02)); +#495411 = DIRECTION('',(0.,0.,1.)); +#495412 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#495413 = ORIENTED_EDGE('',*,*,#495414,.T.); +#495414 = EDGE_CURVE('',#495406,#495415,#495417,.T.); +#495415 = VERTEX_POINT('',#495416); +#495416 = CARTESIAN_POINT('',(142.32,-157.85,-5.E-02)); +#495417 = LINE('',#495418,#495419); +#495418 = CARTESIAN_POINT('',(142.32,-158.45,-5.E-02)); +#495419 = VECTOR('',#495420,1.); +#495420 = DIRECTION('',(0.,1.,0.)); +#495421 = ORIENTED_EDGE('',*,*,#495422,.T.); +#495422 = EDGE_CURVE('',#495415,#495423,#495425,.T.); +#495423 = VERTEX_POINT('',#495424); +#495424 = CARTESIAN_POINT('',(141.32,-157.85,-5.E-02)); +#495425 = CIRCLE('',#495426,0.500000000001); +#495426 = AXIS2_PLACEMENT_3D('',#495427,#495428,#495429); +#495427 = CARTESIAN_POINT('',(141.82,-157.8499991518,-5.E-02)); +#495428 = DIRECTION('',(0.,0.,1.)); +#495429 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#495430 = ORIENTED_EDGE('',*,*,#495431,.T.); +#495431 = EDGE_CURVE('',#495423,#495404,#495432,.T.); +#495432 = LINE('',#495433,#495434); +#495433 = CARTESIAN_POINT('',(141.32,-157.85,-5.E-02)); +#495434 = VECTOR('',#495435,1.); +#495435 = DIRECTION('',(0.,-1.,0.)); +#495436 = FACE_BOUND('',#495437,.T.); +#495437 = EDGE_LOOP('',(#495438)); +#495438 = ORIENTED_EDGE('',*,*,#495439,.T.); +#495439 = EDGE_CURVE('',#495440,#495440,#495442,.T.); +#495440 = VERTEX_POINT('',#495441); +#495441 = CARTESIAN_POINT('',(127.325,-157.95,-5.E-02)); +#495442 = CIRCLE('',#495443,0.45); +#495443 = AXIS2_PLACEMENT_3D('',#495444,#495445,#495446); +#495444 = CARTESIAN_POINT('',(126.875,-157.95,-5.E-02)); +#495445 = DIRECTION('',(0.,0.,1.)); +#495446 = DIRECTION('',(1.,0.,-0.)); +#495447 = FACE_BOUND('',#495448,.T.); +#495448 = EDGE_LOOP('',(#495449)); +#495449 = ORIENTED_EDGE('',*,*,#495450,.T.); +#495450 = EDGE_CURVE('',#495451,#495451,#495453,.T.); +#495451 = VERTEX_POINT('',#495452); +#495452 = CARTESIAN_POINT('',(131.575,-157.95,-5.E-02)); +#495453 = CIRCLE('',#495454,0.45); +#495454 = AXIS2_PLACEMENT_3D('',#495455,#495456,#495457); +#495455 = CARTESIAN_POINT('',(131.125,-157.95,-5.E-02)); +#495456 = DIRECTION('',(0.,0.,1.)); +#495457 = DIRECTION('',(1.,0.,-0.)); +#495458 = FACE_BOUND('',#495459,.T.); +#495459 = EDGE_LOOP('',(#495460)); +#495460 = ORIENTED_EDGE('',*,*,#495461,.T.); +#495461 = EDGE_CURVE('',#495462,#495462,#495464,.T.); +#495462 = VERTEX_POINT('',#495463); +#495463 = CARTESIAN_POINT('',(124.349999,-156.5,-5.E-02)); +#495464 = CIRCLE('',#495465,1.349999); +#495465 = AXIS2_PLACEMENT_3D('',#495466,#495467,#495468); +#495466 = CARTESIAN_POINT('',(123.,-156.5,-5.E-02)); +#495467 = DIRECTION('',(0.,0.,1.)); +#495468 = DIRECTION('',(1.,0.,-0.)); +#495469 = FACE_BOUND('',#495470,.T.); +#495470 = EDGE_LOOP('',(#495471)); +#495471 = ORIENTED_EDGE('',*,*,#495472,.T.); +#495472 = EDGE_CURVE('',#495473,#495473,#495475,.T.); +#495473 = VERTEX_POINT('',#495474); +#495474 = CARTESIAN_POINT('',(153.349999,-156.5,-5.E-02)); +#495475 = CIRCLE('',#495476,1.349999); +#495476 = AXIS2_PLACEMENT_3D('',#495477,#495478,#495479); +#495477 = CARTESIAN_POINT('',(152.,-156.5,-5.E-02)); +#495478 = DIRECTION('',(0.,0.,1.)); +#495479 = DIRECTION('',(1.,0.,-0.)); +#495480 = FACE_BOUND('',#495481,.T.); +#495481 = EDGE_LOOP('',(#495482,#495493,#495501,#495510,#495518,#495527, + #495535,#495544)); +#495482 = ORIENTED_EDGE('',*,*,#495483,.T.); +#495483 = EDGE_CURVE('',#495484,#495486,#495488,.T.); +#495484 = VERTEX_POINT('',#495485); +#495485 = CARTESIAN_POINT('',(137.625,-157.0625,-5.E-02)); +#495486 = VERTEX_POINT('',#495487); +#495487 = CARTESIAN_POINT('',(137.5125,-156.95,-5.E-02)); +#495488 = CIRCLE('',#495489,0.112498336922); +#495489 = AXIS2_PLACEMENT_3D('',#495490,#495491,#495492); +#495490 = CARTESIAN_POINT('',(137.51250166309,-157.0624983369,-5.E-02)); +#495491 = DIRECTION('',(0.,0.,1.)); +#495492 = DIRECTION('',(0.999999999891,-1.478324243479E-05,0.)); +#495493 = ORIENTED_EDGE('',*,*,#495494,.T.); +#495494 = EDGE_CURVE('',#495486,#495495,#495497,.T.); +#495495 = VERTEX_POINT('',#495496); +#495496 = CARTESIAN_POINT('',(137.2875,-156.95,-5.E-02)); +#495497 = LINE('',#495498,#495499); +#495498 = CARTESIAN_POINT('',(137.5125,-156.95,-5.E-02)); +#495499 = VECTOR('',#495500,1.); +#495500 = DIRECTION('',(-1.,0.,0.)); +#495501 = ORIENTED_EDGE('',*,*,#495502,.T.); +#495502 = EDGE_CURVE('',#495495,#495503,#495505,.T.); +#495503 = VERTEX_POINT('',#495504); +#495504 = CARTESIAN_POINT('',(137.175,-157.0625,-5.E-02)); +#495505 = CIRCLE('',#495506,0.112498336922); +#495506 = AXIS2_PLACEMENT_3D('',#495507,#495508,#495509); +#495507 = CARTESIAN_POINT('',(137.28749833691,-157.0624983369,-5.E-02)); +#495508 = DIRECTION('',(0.,0.,1.)); +#495509 = DIRECTION('',(1.478324192951E-05,0.999999999891,-0.)); +#495510 = ORIENTED_EDGE('',*,*,#495511,.T.); +#495511 = EDGE_CURVE('',#495503,#495512,#495514,.T.); +#495512 = VERTEX_POINT('',#495513); +#495513 = CARTESIAN_POINT('',(137.175,-157.4375,-5.E-02)); +#495514 = LINE('',#495515,#495516); +#495515 = CARTESIAN_POINT('',(137.175,-157.0625,-5.E-02)); +#495516 = VECTOR('',#495517,1.); +#495517 = DIRECTION('',(0.,-1.,0.)); +#495518 = ORIENTED_EDGE('',*,*,#495519,.T.); +#495519 = EDGE_CURVE('',#495512,#495520,#495522,.T.); +#495520 = VERTEX_POINT('',#495521); +#495521 = CARTESIAN_POINT('',(137.2875,-157.55,-5.E-02)); +#495522 = CIRCLE('',#495523,0.112498336922); +#495523 = AXIS2_PLACEMENT_3D('',#495524,#495525,#495526); +#495524 = CARTESIAN_POINT('',(137.28749833691,-157.437501663,-5.E-02)); +#495525 = DIRECTION('',(0.,0.,1.)); +#495526 = DIRECTION('',(-0.999999999891,1.478324218215E-05,0.)); +#495527 = ORIENTED_EDGE('',*,*,#495528,.T.); +#495528 = EDGE_CURVE('',#495520,#495529,#495531,.T.); +#495529 = VERTEX_POINT('',#495530); +#495530 = CARTESIAN_POINT('',(137.5125,-157.55,-5.E-02)); +#495531 = LINE('',#495532,#495533); +#495532 = CARTESIAN_POINT('',(137.2875,-157.55,-5.E-02)); +#495533 = VECTOR('',#495534,1.); +#495534 = DIRECTION('',(1.,0.,0.)); +#495535 = ORIENTED_EDGE('',*,*,#495536,.T.); +#495536 = EDGE_CURVE('',#495529,#495537,#495539,.T.); +#495537 = VERTEX_POINT('',#495538); +#495538 = CARTESIAN_POINT('',(137.625,-157.4375,-5.E-02)); +#495539 = CIRCLE('',#495540,0.112498336922); +#495540 = AXIS2_PLACEMENT_3D('',#495541,#495542,#495543); +#495541 = CARTESIAN_POINT('',(137.51250166309,-157.437501663,-5.E-02)); +#495542 = DIRECTION('',(0.,0.,1.)); +#495543 = DIRECTION('',(-1.478324243479E-05,-0.999999999891,0.)); +#495544 = ORIENTED_EDGE('',*,*,#495545,.T.); +#495545 = EDGE_CURVE('',#495537,#495484,#495546,.T.); +#495546 = LINE('',#495547,#495548); +#495547 = CARTESIAN_POINT('',(137.625,-157.4375,-5.E-02)); +#495548 = VECTOR('',#495549,1.); +#495549 = DIRECTION('',(0.,1.,0.)); +#495550 = FACE_BOUND('',#495551,.T.); +#495551 = EDGE_LOOP('',(#495552,#495563,#495571,#495580,#495588,#495597, + #495605,#495614)); +#495552 = ORIENTED_EDGE('',*,*,#495553,.T.); +#495553 = EDGE_CURVE('',#495554,#495556,#495558,.T.); +#495554 = VERTEX_POINT('',#495555); +#495555 = CARTESIAN_POINT('',(137.625,-154.9625,-5.E-02)); +#495556 = VERTEX_POINT('',#495557); +#495557 = CARTESIAN_POINT('',(137.5125,-154.85,-5.E-02)); +#495558 = CIRCLE('',#495559,0.112498336922); +#495559 = AXIS2_PLACEMENT_3D('',#495560,#495561,#495562); +#495560 = CARTESIAN_POINT('',(137.51250166309,-154.9624983369,-5.E-02)); +#495561 = DIRECTION('',(0.,0.,1.)); +#495562 = DIRECTION('',(0.999999999891,-1.478324192951E-05,0.)); +#495563 = ORIENTED_EDGE('',*,*,#495564,.T.); +#495564 = EDGE_CURVE('',#495556,#495565,#495567,.T.); +#495565 = VERTEX_POINT('',#495566); +#495566 = CARTESIAN_POINT('',(137.2875,-154.85,-5.E-02)); +#495567 = LINE('',#495568,#495569); +#495568 = CARTESIAN_POINT('',(137.5125,-154.85,-5.E-02)); +#495569 = VECTOR('',#495570,1.); +#495570 = DIRECTION('',(-1.,0.,0.)); +#495571 = ORIENTED_EDGE('',*,*,#495572,.T.); +#495572 = EDGE_CURVE('',#495565,#495573,#495575,.T.); +#495573 = VERTEX_POINT('',#495574); +#495574 = CARTESIAN_POINT('',(137.175,-154.9625,-5.E-02)); +#495575 = CIRCLE('',#495576,0.112498336922); +#495576 = AXIS2_PLACEMENT_3D('',#495577,#495578,#495579); +#495577 = CARTESIAN_POINT('',(137.28749833691,-154.9624983369,-5.E-02)); +#495578 = DIRECTION('',(0.,0.,1.)); +#495579 = DIRECTION('',(1.478324167686E-05,0.999999999891,-0.)); +#495580 = ORIENTED_EDGE('',*,*,#495581,.T.); +#495581 = EDGE_CURVE('',#495573,#495582,#495584,.T.); +#495582 = VERTEX_POINT('',#495583); +#495583 = CARTESIAN_POINT('',(137.175,-155.3375,-5.E-02)); +#495584 = LINE('',#495585,#495586); +#495585 = CARTESIAN_POINT('',(137.175,-154.9625,-5.E-02)); +#495586 = VECTOR('',#495587,1.); +#495587 = DIRECTION('',(0.,-1.,0.)); +#495588 = ORIENTED_EDGE('',*,*,#495589,.T.); +#495589 = EDGE_CURVE('',#495582,#495590,#495592,.T.); +#495590 = VERTEX_POINT('',#495591); +#495591 = CARTESIAN_POINT('',(137.2875,-155.45,-5.E-02)); +#495592 = CIRCLE('',#495593,0.112498336922); +#495593 = AXIS2_PLACEMENT_3D('',#495594,#495595,#495596); +#495594 = CARTESIAN_POINT('',(137.28749833691,-155.337501663,-5.E-02)); +#495595 = DIRECTION('',(0.,0.,1.)); +#495596 = DIRECTION('',(-0.999999999891,1.478324192951E-05,0.)); +#495597 = ORIENTED_EDGE('',*,*,#495598,.T.); +#495598 = EDGE_CURVE('',#495590,#495599,#495601,.T.); +#495599 = VERTEX_POINT('',#495600); +#495600 = CARTESIAN_POINT('',(137.5125,-155.45,-5.E-02)); +#495601 = LINE('',#495602,#495603); +#495602 = CARTESIAN_POINT('',(137.2875,-155.45,-5.E-02)); +#495603 = VECTOR('',#495604,1.); +#495604 = DIRECTION('',(1.,0.,0.)); +#495605 = ORIENTED_EDGE('',*,*,#495606,.T.); +#495606 = EDGE_CURVE('',#495599,#495607,#495609,.T.); +#495607 = VERTEX_POINT('',#495608); +#495608 = CARTESIAN_POINT('',(137.625,-155.3375,-5.E-02)); +#495609 = CIRCLE('',#495610,0.112498336922); +#495610 = AXIS2_PLACEMENT_3D('',#495611,#495612,#495613); +#495611 = CARTESIAN_POINT('',(137.51250166309,-155.337501663,-5.E-02)); +#495612 = DIRECTION('',(0.,0.,1.)); +#495613 = DIRECTION('',(-1.478324218215E-05,-0.999999999891,0.)); +#495614 = ORIENTED_EDGE('',*,*,#495615,.T.); +#495615 = EDGE_CURVE('',#495607,#495554,#495616,.T.); +#495616 = LINE('',#495617,#495618); +#495617 = CARTESIAN_POINT('',(137.625,-155.3375,-5.E-02)); +#495618 = VECTOR('',#495619,1.); +#495619 = DIRECTION('',(0.,1.,0.)); +#495620 = FACE_BOUND('',#495621,.T.); +#495621 = EDGE_LOOP('',(#495622,#495633,#495641,#495650)); +#495622 = ORIENTED_EDGE('',*,*,#495623,.T.); +#495623 = EDGE_CURVE('',#495624,#495626,#495628,.T.); +#495624 = VERTEX_POINT('',#495625); +#495625 = CARTESIAN_POINT('',(132.68,-154.52,-5.E-02)); +#495626 = VERTEX_POINT('',#495627); +#495627 = CARTESIAN_POINT('',(133.68,-154.52,-5.E-02)); +#495628 = CIRCLE('',#495629,0.5); +#495629 = AXIS2_PLACEMENT_3D('',#495630,#495631,#495632); +#495630 = CARTESIAN_POINT('',(133.18,-154.5199995566,-5.E-02)); +#495631 = DIRECTION('',(0.,0.,1.)); +#495632 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#495633 = ORIENTED_EDGE('',*,*,#495634,.T.); +#495634 = EDGE_CURVE('',#495626,#495635,#495637,.T.); +#495635 = VERTEX_POINT('',#495636); +#495636 = CARTESIAN_POINT('',(133.68,-153.42,-5.E-02)); +#495637 = LINE('',#495638,#495639); +#495638 = CARTESIAN_POINT('',(133.68,-154.52,-5.E-02)); +#495639 = VECTOR('',#495640,1.); +#495640 = DIRECTION('',(0.,1.,0.)); +#495641 = ORIENTED_EDGE('',*,*,#495642,.T.); +#495642 = EDGE_CURVE('',#495635,#495643,#495645,.T.); +#495643 = VERTEX_POINT('',#495644); +#495644 = CARTESIAN_POINT('',(132.68,-153.42,-5.E-02)); +#495645 = CIRCLE('',#495646,0.500000000001); +#495646 = AXIS2_PLACEMENT_3D('',#495647,#495648,#495649); +#495647 = CARTESIAN_POINT('',(133.18,-153.4199991518,-5.E-02)); +#495648 = DIRECTION('',(0.,0.,1.)); +#495649 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#495650 = ORIENTED_EDGE('',*,*,#495651,.T.); +#495651 = EDGE_CURVE('',#495643,#495624,#495652,.T.); +#495652 = LINE('',#495653,#495654); +#495653 = CARTESIAN_POINT('',(132.68,-153.42,-5.E-02)); +#495654 = VECTOR('',#495655,1.); +#495655 = DIRECTION('',(0.,-1.,0.)); +#495656 = FACE_BOUND('',#495657,.T.); +#495657 = EDGE_LOOP('',(#495658,#495669,#495677,#495686)); +#495658 = ORIENTED_EDGE('',*,*,#495659,.T.); +#495659 = EDGE_CURVE('',#495660,#495662,#495664,.T.); +#495660 = VERTEX_POINT('',#495661); +#495661 = CARTESIAN_POINT('',(141.32,-154.52,-5.E-02)); +#495662 = VERTEX_POINT('',#495663); +#495663 = CARTESIAN_POINT('',(142.32,-154.52,-5.E-02)); +#495664 = CIRCLE('',#495665,0.5); +#495665 = AXIS2_PLACEMENT_3D('',#495666,#495667,#495668); +#495666 = CARTESIAN_POINT('',(141.82,-154.5199995566,-5.E-02)); +#495667 = DIRECTION('',(0.,0.,1.)); +#495668 = DIRECTION('',(-1.,-8.866804250825E-07,0.)); +#495669 = ORIENTED_EDGE('',*,*,#495670,.T.); +#495670 = EDGE_CURVE('',#495662,#495671,#495673,.T.); +#495671 = VERTEX_POINT('',#495672); +#495672 = CARTESIAN_POINT('',(142.32,-153.42,-5.E-02)); +#495673 = LINE('',#495674,#495675); +#495674 = CARTESIAN_POINT('',(142.32,-154.52,-5.E-02)); +#495675 = VECTOR('',#495676,1.); +#495676 = DIRECTION('',(0.,1.,0.)); +#495677 = ORIENTED_EDGE('',*,*,#495678,.T.); +#495678 = EDGE_CURVE('',#495671,#495679,#495681,.T.); +#495679 = VERTEX_POINT('',#495680); +#495680 = CARTESIAN_POINT('',(141.32,-153.42,-5.E-02)); +#495681 = CIRCLE('',#495682,0.500000000001); +#495682 = AXIS2_PLACEMENT_3D('',#495683,#495684,#495685); +#495683 = CARTESIAN_POINT('',(141.82,-153.4199991518,-5.E-02)); +#495684 = DIRECTION('',(0.,0.,1.)); +#495685 = DIRECTION('',(0.999999999999,-1.696250706116E-06,0.)); +#495686 = ORIENTED_EDGE('',*,*,#495687,.T.); +#495687 = EDGE_CURVE('',#495679,#495660,#495688,.T.); +#495688 = LINE('',#495689,#495690); +#495689 = CARTESIAN_POINT('',(141.32,-153.42,-5.E-02)); +#495690 = VECTOR('',#495691,1.); +#495691 = DIRECTION('',(0.,-1.,0.)); +#495692 = FACE_BOUND('',#495693,.T.); +#495693 = EDGE_LOOP('',(#495694)); +#495694 = ORIENTED_EDGE('',*,*,#495695,.T.); +#495695 = EDGE_CURVE('',#495696,#495696,#495698,.T.); +#495696 = VERTEX_POINT('',#495697); +#495697 = CARTESIAN_POINT('',(134.935,-154.5,-5.E-02)); +#495698 = CIRCLE('',#495699,0.325); +#495699 = AXIS2_PLACEMENT_3D('',#495700,#495701,#495702); +#495700 = CARTESIAN_POINT('',(134.61,-154.5,-5.E-02)); +#495701 = DIRECTION('',(0.,0.,1.)); +#495702 = DIRECTION('',(1.,0.,-0.)); +#495703 = FACE_BOUND('',#495704,.T.); +#495704 = EDGE_LOOP('',(#495705)); +#495705 = ORIENTED_EDGE('',*,*,#495706,.T.); +#495706 = EDGE_CURVE('',#495707,#495707,#495709,.T.); +#495707 = VERTEX_POINT('',#495708); +#495708 = CARTESIAN_POINT('',(140.715,-154.5,-5.E-02)); +#495709 = CIRCLE('',#495710,0.325); +#495710 = AXIS2_PLACEMENT_3D('',#495711,#495712,#495713); +#495711 = CARTESIAN_POINT('',(140.39,-154.5,-5.E-02)); +#495712 = DIRECTION('',(0.,0.,1.)); +#495713 = DIRECTION('',(1.,0.,-0.)); +#495714 = FACE_BOUND('',#495715,.T.); +#495715 = EDGE_LOOP('',(#495716)); +#495716 = ORIENTED_EDGE('',*,*,#495717,.T.); +#495717 = EDGE_CURVE('',#495718,#495718,#495720,.T.); +#495718 = VERTEX_POINT('',#495719); +#495719 = CARTESIAN_POINT('',(124.7155,-149.5,-5.E-02)); +#495720 = CIRCLE('',#495721,0.7155); +#495721 = AXIS2_PLACEMENT_3D('',#495722,#495723,#495724); +#495722 = CARTESIAN_POINT('',(124.,-149.5,-5.E-02)); +#495723 = DIRECTION('',(0.,0.,1.)); +#495724 = DIRECTION('',(1.,0.,-0.)); +#495725 = FACE_BOUND('',#495726,.T.); +#495726 = EDGE_LOOP('',(#495727)); +#495727 = ORIENTED_EDGE('',*,*,#495728,.T.); +#495728 = EDGE_CURVE('',#495729,#495729,#495731,.T.); +#495729 = VERTEX_POINT('',#495730); +#495730 = CARTESIAN_POINT('',(126.7155,-149.5,-5.E-02)); +#495731 = CIRCLE('',#495732,0.7155); +#495732 = AXIS2_PLACEMENT_3D('',#495733,#495734,#495735); +#495733 = CARTESIAN_POINT('',(126.,-149.5,-5.E-02)); +#495734 = DIRECTION('',(0.,0.,1.)); +#495735 = DIRECTION('',(1.,0.,-0.)); +#495736 = FACE_BOUND('',#495737,.T.); +#495737 = EDGE_LOOP('',(#495738)); +#495738 = ORIENTED_EDGE('',*,*,#495739,.T.); +#495739 = EDGE_CURVE('',#495740,#495740,#495742,.T.); +#495740 = VERTEX_POINT('',#495741); +#495741 = CARTESIAN_POINT('',(128.7155,-149.5,-5.E-02)); +#495742 = CIRCLE('',#495743,0.7155); +#495743 = AXIS2_PLACEMENT_3D('',#495744,#495745,#495746); +#495744 = CARTESIAN_POINT('',(128.,-149.5,-5.E-02)); +#495745 = DIRECTION('',(0.,0.,1.)); +#495746 = DIRECTION('',(1.,0.,-0.)); +#495747 = FACE_BOUND('',#495748,.T.); +#495748 = EDGE_LOOP('',(#495749)); +#495749 = ORIENTED_EDGE('',*,*,#495750,.T.); +#495750 = EDGE_CURVE('',#495751,#495751,#495753,.T.); +#495751 = VERTEX_POINT('',#495752); +#495752 = CARTESIAN_POINT('',(130.7155,-149.5,-5.E-02)); +#495753 = CIRCLE('',#495754,0.7155); +#495754 = AXIS2_PLACEMENT_3D('',#495755,#495756,#495757); +#495755 = CARTESIAN_POINT('',(130.,-149.5,-5.E-02)); +#495756 = DIRECTION('',(0.,0.,1.)); +#495757 = DIRECTION('',(1.,0.,-0.)); +#495758 = FACE_BOUND('',#495759,.T.); +#495759 = EDGE_LOOP('',(#495760)); +#495760 = ORIENTED_EDGE('',*,*,#495761,.T.); +#495761 = EDGE_CURVE('',#495762,#495762,#495764,.T.); +#495762 = VERTEX_POINT('',#495763); +#495763 = CARTESIAN_POINT('',(132.7155,-149.5,-5.E-02)); +#495764 = CIRCLE('',#495765,0.7155); +#495765 = AXIS2_PLACEMENT_3D('',#495766,#495767,#495768); +#495766 = CARTESIAN_POINT('',(132.,-149.5,-5.E-02)); +#495767 = DIRECTION('',(0.,0.,1.)); +#495768 = DIRECTION('',(1.,0.,-0.)); +#495769 = FACE_BOUND('',#495770,.T.); +#495770 = EDGE_LOOP('',(#495771)); +#495771 = ORIENTED_EDGE('',*,*,#495772,.T.); +#495772 = EDGE_CURVE('',#495773,#495773,#495775,.T.); +#495773 = VERTEX_POINT('',#495774); +#495774 = CARTESIAN_POINT('',(134.7155,-149.5,-5.E-02)); +#495775 = CIRCLE('',#495776,0.7155); +#495776 = AXIS2_PLACEMENT_3D('',#495777,#495778,#495779); +#495777 = CARTESIAN_POINT('',(134.,-149.5,-5.E-02)); +#495778 = DIRECTION('',(0.,0.,1.)); +#495779 = DIRECTION('',(1.,0.,-0.)); +#495780 = FACE_BOUND('',#495781,.T.); +#495781 = EDGE_LOOP('',(#495782)); +#495782 = ORIENTED_EDGE('',*,*,#495783,.T.); +#495783 = EDGE_CURVE('',#495784,#495784,#495786,.T.); +#495784 = VERTEX_POINT('',#495785); +#495785 = CARTESIAN_POINT('',(136.7155,-149.5,-5.E-02)); +#495786 = CIRCLE('',#495787,0.7155); +#495787 = AXIS2_PLACEMENT_3D('',#495788,#495789,#495790); +#495788 = CARTESIAN_POINT('',(136.,-149.5,-5.E-02)); +#495789 = DIRECTION('',(0.,0.,1.)); +#495790 = DIRECTION('',(1.,0.,-0.)); +#495791 = FACE_BOUND('',#495792,.T.); +#495792 = EDGE_LOOP('',(#495793)); +#495793 = ORIENTED_EDGE('',*,*,#495794,.T.); +#495794 = EDGE_CURVE('',#495795,#495795,#495797,.T.); +#495795 = VERTEX_POINT('',#495796); +#495796 = CARTESIAN_POINT('',(138.7155,-149.5,-5.E-02)); +#495797 = CIRCLE('',#495798,0.7155); +#495798 = AXIS2_PLACEMENT_3D('',#495799,#495800,#495801); +#495799 = CARTESIAN_POINT('',(138.,-149.5,-5.E-02)); +#495800 = DIRECTION('',(0.,0.,1.)); +#495801 = DIRECTION('',(1.,0.,-0.)); +#495802 = FACE_BOUND('',#495803,.T.); +#495803 = EDGE_LOOP('',(#495804)); +#495804 = ORIENTED_EDGE('',*,*,#495805,.T.); +#495805 = EDGE_CURVE('',#495806,#495806,#495808,.T.); +#495806 = VERTEX_POINT('',#495807); +#495807 = CARTESIAN_POINT('',(140.7155,-149.5,-5.E-02)); +#495808 = CIRCLE('',#495809,0.7155); +#495809 = AXIS2_PLACEMENT_3D('',#495810,#495811,#495812); +#495810 = CARTESIAN_POINT('',(140.,-149.5,-5.E-02)); +#495811 = DIRECTION('',(0.,0.,1.)); +#495812 = DIRECTION('',(1.,0.,-0.)); +#495813 = FACE_BOUND('',#495814,.T.); +#495814 = EDGE_LOOP('',(#495815)); +#495815 = ORIENTED_EDGE('',*,*,#495816,.T.); +#495816 = EDGE_CURVE('',#495817,#495817,#495819,.T.); +#495817 = VERTEX_POINT('',#495818); +#495818 = CARTESIAN_POINT('',(142.7155,-149.5,-5.E-02)); +#495819 = CIRCLE('',#495820,0.7155); +#495820 = AXIS2_PLACEMENT_3D('',#495821,#495822,#495823); +#495821 = CARTESIAN_POINT('',(142.,-149.5,-5.E-02)); +#495822 = DIRECTION('',(0.,0.,1.)); +#495823 = DIRECTION('',(1.,0.,-0.)); +#495824 = FACE_BOUND('',#495825,.T.); +#495825 = EDGE_LOOP('',(#495826,#495837,#495845,#495854,#495862,#495871, + #495879,#495888)); +#495826 = ORIENTED_EDGE('',*,*,#495827,.T.); +#495827 = EDGE_CURVE('',#495828,#495830,#495832,.T.); +#495828 = VERTEX_POINT('',#495829); +#495829 = CARTESIAN_POINT('',(148.42,-133.515,-5.E-02)); +#495830 = VERTEX_POINT('',#495831); +#495831 = CARTESIAN_POINT('',(148.285,-133.38,-5.E-02)); +#495832 = CIRCLE('',#495833,0.135001418495); +#495833 = AXIS2_PLACEMENT_3D('',#495834,#495835,#495836); +#495834 = CARTESIAN_POINT('',(148.28499858151,-133.5150014184,-5.E-02)); +#495835 = DIRECTION('',(0.,0.,1.)); +#495836 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#495837 = ORIENTED_EDGE('',*,*,#495838,.T.); +#495838 = EDGE_CURVE('',#495830,#495839,#495841,.T.); +#495839 = VERTEX_POINT('',#495840); +#495840 = CARTESIAN_POINT('',(148.015,-133.38,-5.E-02)); +#495841 = LINE('',#495842,#495843); +#495842 = CARTESIAN_POINT('',(148.285,-133.38,-5.E-02)); +#495843 = VECTOR('',#495844,1.); +#495844 = DIRECTION('',(-1.,0.,0.)); +#495845 = ORIENTED_EDGE('',*,*,#495846,.T.); +#495846 = EDGE_CURVE('',#495839,#495847,#495849,.T.); +#495847 = VERTEX_POINT('',#495848); +#495848 = CARTESIAN_POINT('',(147.88,-133.515,-5.E-02)); +#495849 = CIRCLE('',#495850,0.135001418495); +#495850 = AXIS2_PLACEMENT_3D('',#495851,#495852,#495853); +#495851 = CARTESIAN_POINT('',(148.01500141848,-133.5150014184,-5.E-02)); +#495852 = DIRECTION('',(0.,0.,1.)); +#495853 = DIRECTION('',(-1.050720693735E-05,0.999999999945,0.)); +#495854 = ORIENTED_EDGE('',*,*,#495855,.T.); +#495855 = EDGE_CURVE('',#495847,#495856,#495858,.T.); +#495856 = VERTEX_POINT('',#495857); +#495857 = CARTESIAN_POINT('',(147.88,-133.885,-5.E-02)); +#495858 = LINE('',#495859,#495860); +#495859 = CARTESIAN_POINT('',(147.88,-133.515,-5.E-02)); +#495860 = VECTOR('',#495861,1.); +#495861 = DIRECTION('',(0.,-1.,0.)); +#495862 = ORIENTED_EDGE('',*,*,#495863,.T.); +#495863 = EDGE_CURVE('',#495856,#495864,#495866,.T.); +#495864 = VERTEX_POINT('',#495865); +#495865 = CARTESIAN_POINT('',(148.015,-134.02,-5.E-02)); +#495866 = CIRCLE('',#495867,0.135001418495); +#495867 = AXIS2_PLACEMENT_3D('',#495868,#495869,#495870); +#495868 = CARTESIAN_POINT('',(148.01500141848,-133.8849985815,-5.E-02)); +#495869 = DIRECTION('',(0.,0.,1.)); +#495870 = DIRECTION('',(-0.999999999945,-1.050720672682E-05,0.)); +#495871 = ORIENTED_EDGE('',*,*,#495872,.T.); +#495872 = EDGE_CURVE('',#495864,#495873,#495875,.T.); +#495873 = VERTEX_POINT('',#495874); +#495874 = CARTESIAN_POINT('',(148.285,-134.02,-5.E-02)); +#495875 = LINE('',#495876,#495877); +#495876 = CARTESIAN_POINT('',(148.015,-134.02,-5.E-02)); +#495877 = VECTOR('',#495878,1.); +#495878 = DIRECTION('',(1.,0.,0.)); +#495879 = ORIENTED_EDGE('',*,*,#495880,.T.); +#495880 = EDGE_CURVE('',#495873,#495881,#495883,.T.); +#495881 = VERTEX_POINT('',#495882); +#495882 = CARTESIAN_POINT('',(148.42,-133.885,-5.E-02)); +#495883 = CIRCLE('',#495884,0.135001418495); +#495884 = AXIS2_PLACEMENT_3D('',#495885,#495886,#495887); +#495885 = CARTESIAN_POINT('',(148.28499858151,-133.8849985815,-5.E-02)); +#495886 = DIRECTION('',(0.,0.,1.)); +#495887 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#495888 = ORIENTED_EDGE('',*,*,#495889,.T.); +#495889 = EDGE_CURVE('',#495881,#495828,#495890,.T.); +#495890 = LINE('',#495891,#495892); +#495891 = CARTESIAN_POINT('',(148.42,-133.885,-5.E-02)); +#495892 = VECTOR('',#495893,1.); +#495893 = DIRECTION('',(0.,1.,0.)); +#495894 = FACE_BOUND('',#495895,.T.); +#495895 = EDGE_LOOP('',(#495896,#495907,#495915,#495924,#495932,#495941, + #495949,#495958)); +#495896 = ORIENTED_EDGE('',*,*,#495897,.T.); +#495897 = EDGE_CURVE('',#495898,#495900,#495902,.T.); +#495898 = VERTEX_POINT('',#495899); +#495899 = CARTESIAN_POINT('',(149.44,-133.515,-5.E-02)); +#495900 = VERTEX_POINT('',#495901); +#495901 = CARTESIAN_POINT('',(149.305,-133.38,-5.E-02)); +#495902 = CIRCLE('',#495903,0.135001418495); +#495903 = AXIS2_PLACEMENT_3D('',#495904,#495905,#495906); +#495904 = CARTESIAN_POINT('',(149.30499858151,-133.5150014184,-5.E-02)); +#495905 = DIRECTION('',(0.,0.,1.)); +#495906 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#495907 = ORIENTED_EDGE('',*,*,#495908,.T.); +#495908 = EDGE_CURVE('',#495900,#495909,#495911,.T.); +#495909 = VERTEX_POINT('',#495910); +#495910 = CARTESIAN_POINT('',(149.035,-133.38,-5.E-02)); +#495911 = LINE('',#495912,#495913); +#495912 = CARTESIAN_POINT('',(149.305,-133.38,-5.E-02)); +#495913 = VECTOR('',#495914,1.); +#495914 = DIRECTION('',(-1.,0.,0.)); +#495915 = ORIENTED_EDGE('',*,*,#495916,.T.); +#495916 = EDGE_CURVE('',#495909,#495917,#495919,.T.); +#495917 = VERTEX_POINT('',#495918); +#495918 = CARTESIAN_POINT('',(148.9,-133.515,-5.E-02)); +#495919 = CIRCLE('',#495920,0.135001418495); +#495920 = AXIS2_PLACEMENT_3D('',#495921,#495922,#495923); +#495921 = CARTESIAN_POINT('',(149.03500141848,-133.5150014184,-5.E-02)); +#495922 = DIRECTION('',(0.,0.,1.)); +#495923 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#495924 = ORIENTED_EDGE('',*,*,#495925,.T.); +#495925 = EDGE_CURVE('',#495917,#495926,#495928,.T.); +#495926 = VERTEX_POINT('',#495927); +#495927 = CARTESIAN_POINT('',(148.9,-133.885,-5.E-02)); +#495928 = LINE('',#495929,#495930); +#495929 = CARTESIAN_POINT('',(148.9,-133.515,-5.E-02)); +#495930 = VECTOR('',#495931,1.); +#495931 = DIRECTION('',(0.,-1.,0.)); +#495932 = ORIENTED_EDGE('',*,*,#495933,.T.); +#495933 = EDGE_CURVE('',#495926,#495934,#495936,.T.); +#495934 = VERTEX_POINT('',#495935); +#495935 = CARTESIAN_POINT('',(149.035,-134.02,-5.E-02)); +#495936 = CIRCLE('',#495937,0.135001418495); +#495937 = AXIS2_PLACEMENT_3D('',#495938,#495939,#495940); +#495938 = CARTESIAN_POINT('',(149.03500141848,-133.8849985815,-5.E-02)); +#495939 = DIRECTION('',(0.,0.,1.)); +#495940 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#495941 = ORIENTED_EDGE('',*,*,#495942,.T.); +#495942 = EDGE_CURVE('',#495934,#495943,#495945,.T.); +#495943 = VERTEX_POINT('',#495944); +#495944 = CARTESIAN_POINT('',(149.305,-134.02,-5.E-02)); +#495945 = LINE('',#495946,#495947); +#495946 = CARTESIAN_POINT('',(149.035,-134.02,-5.E-02)); +#495947 = VECTOR('',#495948,1.); +#495948 = DIRECTION('',(1.,0.,0.)); +#495949 = ORIENTED_EDGE('',*,*,#495950,.T.); +#495950 = EDGE_CURVE('',#495943,#495951,#495953,.T.); +#495951 = VERTEX_POINT('',#495952); +#495952 = CARTESIAN_POINT('',(149.44,-133.885,-5.E-02)); +#495953 = CIRCLE('',#495954,0.135001418495); +#495954 = AXIS2_PLACEMENT_3D('',#495955,#495956,#495957); +#495955 = CARTESIAN_POINT('',(149.30499858151,-133.8849985815,-5.E-02)); +#495956 = DIRECTION('',(0.,0.,1.)); +#495957 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#495958 = ORIENTED_EDGE('',*,*,#495959,.T.); +#495959 = EDGE_CURVE('',#495951,#495898,#495960,.T.); +#495960 = LINE('',#495961,#495962); +#495961 = CARTESIAN_POINT('',(149.44,-133.885,-5.E-02)); +#495962 = VECTOR('',#495963,1.); +#495963 = DIRECTION('',(0.,1.,0.)); +#495964 = FACE_BOUND('',#495965,.T.); +#495965 = EDGE_LOOP('',(#495966,#495977,#495985,#495994,#496002,#496011, + #496019,#496028)); +#495966 = ORIENTED_EDGE('',*,*,#495967,.T.); +#495967 = EDGE_CURVE('',#495968,#495970,#495972,.T.); +#495968 = VERTEX_POINT('',#495969); +#495969 = CARTESIAN_POINT('',(147.325,-132.1,-5.E-02)); +#495970 = VERTEX_POINT('',#495971); +#495971 = CARTESIAN_POINT('',(147.2125,-131.9875,-5.E-02)); +#495972 = CIRCLE('',#495973,0.112498336922); +#495973 = AXIS2_PLACEMENT_3D('',#495974,#495975,#495976); +#495974 = CARTESIAN_POINT('',(147.21250166309,-132.0999983369,-5.E-02)); +#495975 = DIRECTION('',(0.,0.,1.)); +#495976 = DIRECTION('',(0.999999999891,-1.478324192951E-05,0.)); +#495977 = ORIENTED_EDGE('',*,*,#495978,.T.); +#495978 = EDGE_CURVE('',#495970,#495979,#495981,.T.); +#495979 = VERTEX_POINT('',#495980); +#495980 = CARTESIAN_POINT('',(146.9875,-131.9875,-5.E-02)); +#495981 = LINE('',#495982,#495983); +#495982 = CARTESIAN_POINT('',(147.2125,-131.9875,-5.E-02)); +#495983 = VECTOR('',#495984,1.); +#495984 = DIRECTION('',(-1.,0.,0.)); +#495985 = ORIENTED_EDGE('',*,*,#495986,.T.); +#495986 = EDGE_CURVE('',#495979,#495987,#495989,.T.); +#495987 = VERTEX_POINT('',#495988); +#495988 = CARTESIAN_POINT('',(146.875,-132.1,-5.E-02)); +#495989 = CIRCLE('',#495990,0.112498336922); +#495990 = AXIS2_PLACEMENT_3D('',#495991,#495992,#495993); +#495991 = CARTESIAN_POINT('',(146.98749833691,-132.0999983369,-5.E-02)); +#495992 = DIRECTION('',(0.,0.,1.)); +#495993 = DIRECTION('',(1.478324218215E-05,0.999999999891,-0.)); +#495994 = ORIENTED_EDGE('',*,*,#495995,.T.); +#495995 = EDGE_CURVE('',#495987,#495996,#495998,.T.); +#495996 = VERTEX_POINT('',#495997); +#495997 = CARTESIAN_POINT('',(146.875,-132.8,-5.E-02)); +#495998 = LINE('',#495999,#496000); +#495999 = CARTESIAN_POINT('',(146.875,-132.1,-5.E-02)); +#496000 = VECTOR('',#496001,1.); +#496001 = DIRECTION('',(0.,-1.,0.)); +#496002 = ORIENTED_EDGE('',*,*,#496003,.T.); +#496003 = EDGE_CURVE('',#495996,#496004,#496006,.T.); +#496004 = VERTEX_POINT('',#496005); +#496005 = CARTESIAN_POINT('',(146.9875,-132.9125,-5.E-02)); +#496006 = CIRCLE('',#496007,0.112498336922); +#496007 = AXIS2_PLACEMENT_3D('',#496008,#496009,#496010); +#496008 = CARTESIAN_POINT('',(146.98749833691,-132.800001663,-5.E-02)); +#496009 = DIRECTION('',(0.,0.,1.)); +#496010 = DIRECTION('',(-0.999999999891,1.478324192951E-05,0.)); +#496011 = ORIENTED_EDGE('',*,*,#496012,.T.); +#496012 = EDGE_CURVE('',#496004,#496013,#496015,.T.); +#496013 = VERTEX_POINT('',#496014); +#496014 = CARTESIAN_POINT('',(147.2125,-132.9125,-5.E-02)); +#496015 = LINE('',#496016,#496017); +#496016 = CARTESIAN_POINT('',(146.9875,-132.9125,-5.E-02)); +#496017 = VECTOR('',#496018,1.); +#496018 = DIRECTION('',(1.,0.,0.)); +#496019 = ORIENTED_EDGE('',*,*,#496020,.T.); +#496020 = EDGE_CURVE('',#496013,#496021,#496023,.T.); +#496021 = VERTEX_POINT('',#496022); +#496022 = CARTESIAN_POINT('',(147.325,-132.8,-5.E-02)); +#496023 = CIRCLE('',#496024,0.112498336922); +#496024 = AXIS2_PLACEMENT_3D('',#496025,#496026,#496027); +#496025 = CARTESIAN_POINT('',(147.21250166309,-132.800001663,-5.E-02)); +#496026 = DIRECTION('',(0.,0.,1.)); +#496027 = DIRECTION('',(-1.478324167687E-05,-0.999999999891,0.)); +#496028 = ORIENTED_EDGE('',*,*,#496029,.T.); +#496029 = EDGE_CURVE('',#496021,#495968,#496030,.T.); +#496030 = LINE('',#496031,#496032); +#496031 = CARTESIAN_POINT('',(147.325,-132.8,-5.E-02)); +#496032 = VECTOR('',#496033,1.); +#496033 = DIRECTION('',(0.,1.,0.)); +#496034 = FACE_BOUND('',#496035,.T.); +#496035 = EDGE_LOOP('',(#496036,#496047,#496055,#496064,#496072,#496081, + #496089,#496098)); +#496036 = ORIENTED_EDGE('',*,*,#496037,.T.); +#496037 = EDGE_CURVE('',#496038,#496040,#496042,.T.); +#496038 = VERTEX_POINT('',#496039); +#496039 = CARTESIAN_POINT('',(150.57,-131.525,-5.E-02)); +#496040 = VERTEX_POINT('',#496041); +#496041 = CARTESIAN_POINT('',(150.435,-131.39,-5.E-02)); +#496042 = CIRCLE('',#496043,0.135001418495); +#496043 = AXIS2_PLACEMENT_3D('',#496044,#496045,#496046); +#496044 = CARTESIAN_POINT('',(150.43499858151,-131.5250014184,-5.E-02)); +#496045 = DIRECTION('',(0.,0.,1.)); +#496046 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#496047 = ORIENTED_EDGE('',*,*,#496048,.T.); +#496048 = EDGE_CURVE('',#496040,#496049,#496051,.T.); +#496049 = VERTEX_POINT('',#496050); +#496050 = CARTESIAN_POINT('',(150.065,-131.39,-5.E-02)); +#496051 = LINE('',#496052,#496053); +#496052 = CARTESIAN_POINT('',(150.435,-131.39,-5.E-02)); +#496053 = VECTOR('',#496054,1.); +#496054 = DIRECTION('',(-1.,0.,0.)); +#496055 = ORIENTED_EDGE('',*,*,#496056,.T.); +#496056 = EDGE_CURVE('',#496049,#496057,#496059,.T.); +#496057 = VERTEX_POINT('',#496058); +#496058 = CARTESIAN_POINT('',(149.93,-131.525,-5.E-02)); +#496059 = CIRCLE('',#496060,0.135001418495); +#496060 = AXIS2_PLACEMENT_3D('',#496061,#496062,#496063); +#496061 = CARTESIAN_POINT('',(150.06500141848,-131.5250014184,-5.E-02)); +#496062 = DIRECTION('',(0.,0.,1.)); +#496063 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#496064 = ORIENTED_EDGE('',*,*,#496065,.T.); +#496065 = EDGE_CURVE('',#496057,#496066,#496068,.T.); +#496066 = VERTEX_POINT('',#496067); +#496067 = CARTESIAN_POINT('',(149.93,-131.795,-5.E-02)); +#496068 = LINE('',#496069,#496070); +#496069 = CARTESIAN_POINT('',(149.93,-131.525,-5.E-02)); +#496070 = VECTOR('',#496071,1.); +#496071 = DIRECTION('',(0.,-1.,0.)); +#496072 = ORIENTED_EDGE('',*,*,#496073,.T.); +#496073 = EDGE_CURVE('',#496066,#496074,#496076,.T.); +#496074 = VERTEX_POINT('',#496075); +#496075 = CARTESIAN_POINT('',(150.065,-131.93,-5.E-02)); +#496076 = CIRCLE('',#496077,0.135001418495); +#496077 = AXIS2_PLACEMENT_3D('',#496078,#496079,#496080); +#496078 = CARTESIAN_POINT('',(150.06500141848,-131.7949985815,-5.E-02)); +#496079 = DIRECTION('',(0.,0.,1.)); +#496080 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#496081 = ORIENTED_EDGE('',*,*,#496082,.T.); +#496082 = EDGE_CURVE('',#496074,#496083,#496085,.T.); +#496083 = VERTEX_POINT('',#496084); +#496084 = CARTESIAN_POINT('',(150.435,-131.93,-5.E-02)); +#496085 = LINE('',#496086,#496087); +#496086 = CARTESIAN_POINT('',(150.065,-131.93,-5.E-02)); +#496087 = VECTOR('',#496088,1.); +#496088 = DIRECTION('',(1.,0.,0.)); +#496089 = ORIENTED_EDGE('',*,*,#496090,.T.); +#496090 = EDGE_CURVE('',#496083,#496091,#496093,.T.); +#496091 = VERTEX_POINT('',#496092); +#496092 = CARTESIAN_POINT('',(150.57,-131.795,-5.E-02)); +#496093 = CIRCLE('',#496094,0.135001418495); +#496094 = AXIS2_PLACEMENT_3D('',#496095,#496096,#496097); +#496095 = CARTESIAN_POINT('',(150.43499858151,-131.7949985815,-5.E-02)); +#496096 = DIRECTION('',(0.,0.,1.)); +#496097 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#496098 = ORIENTED_EDGE('',*,*,#496099,.T.); +#496099 = EDGE_CURVE('',#496091,#496038,#496100,.T.); +#496100 = LINE('',#496101,#496102); +#496101 = CARTESIAN_POINT('',(150.57,-131.795,-5.E-02)); +#496102 = VECTOR('',#496103,1.); +#496103 = DIRECTION('',(0.,1.,0.)); +#496104 = FACE_BOUND('',#496105,.T.); +#496105 = EDGE_LOOP('',(#496106,#496117,#496125,#496134,#496142,#496151, + #496159,#496168)); +#496106 = ORIENTED_EDGE('',*,*,#496107,.T.); +#496107 = EDGE_CURVE('',#496108,#496110,#496112,.T.); +#496108 = VERTEX_POINT('',#496109); +#496109 = CARTESIAN_POINT('',(146.675,-130.325,-5.E-02)); +#496110 = VERTEX_POINT('',#496111); +#496111 = CARTESIAN_POINT('',(146.5625,-130.2125,-5.E-02)); +#496112 = CIRCLE('',#496113,0.112498336922); +#496113 = AXIS2_PLACEMENT_3D('',#496114,#496115,#496116); +#496114 = CARTESIAN_POINT('',(146.56250166309,-130.3249983369,-5.E-02)); +#496115 = DIRECTION('',(0.,0.,1.)); +#496116 = DIRECTION('',(0.999999999891,-1.478324192951E-05,0.)); +#496117 = ORIENTED_EDGE('',*,*,#496118,.T.); +#496118 = EDGE_CURVE('',#496110,#496119,#496121,.T.); +#496119 = VERTEX_POINT('',#496120); +#496120 = CARTESIAN_POINT('',(146.3375,-130.2125,-5.E-02)); +#496121 = LINE('',#496122,#496123); +#496122 = CARTESIAN_POINT('',(146.5625,-130.2125,-5.E-02)); +#496123 = VECTOR('',#496124,1.); +#496124 = DIRECTION('',(-1.,0.,0.)); +#496125 = ORIENTED_EDGE('',*,*,#496126,.T.); +#496126 = EDGE_CURVE('',#496119,#496127,#496129,.T.); +#496127 = VERTEX_POINT('',#496128); +#496128 = CARTESIAN_POINT('',(146.225,-130.325,-5.E-02)); +#496129 = CIRCLE('',#496130,0.112498336922); +#496130 = AXIS2_PLACEMENT_3D('',#496131,#496132,#496133); +#496131 = CARTESIAN_POINT('',(146.33749833691,-130.3249983369,-5.E-02)); +#496132 = DIRECTION('',(0.,0.,1.)); +#496133 = DIRECTION('',(1.478324167686E-05,0.999999999891,-0.)); +#496134 = ORIENTED_EDGE('',*,*,#496135,.T.); +#496135 = EDGE_CURVE('',#496127,#496136,#496138,.T.); +#496136 = VERTEX_POINT('',#496137); +#496137 = CARTESIAN_POINT('',(146.225,-131.025,-5.E-02)); +#496138 = LINE('',#496139,#496140); +#496139 = CARTESIAN_POINT('',(146.225,-130.325,-5.E-02)); +#496140 = VECTOR('',#496141,1.); +#496141 = DIRECTION('',(0.,-1.,0.)); +#496142 = ORIENTED_EDGE('',*,*,#496143,.T.); +#496143 = EDGE_CURVE('',#496136,#496144,#496146,.T.); +#496144 = VERTEX_POINT('',#496145); +#496145 = CARTESIAN_POINT('',(146.3375,-131.1375,-5.E-02)); +#496146 = CIRCLE('',#496147,0.112498336922); +#496147 = AXIS2_PLACEMENT_3D('',#496148,#496149,#496150); +#496148 = CARTESIAN_POINT('',(146.33749833691,-131.025001663,-5.E-02)); +#496149 = DIRECTION('',(0.,0.,1.)); +#496150 = DIRECTION('',(-0.999999999891,1.478324167686E-05,0.)); +#496151 = ORIENTED_EDGE('',*,*,#496152,.T.); +#496152 = EDGE_CURVE('',#496144,#496153,#496155,.T.); +#496153 = VERTEX_POINT('',#496154); +#496154 = CARTESIAN_POINT('',(146.5625,-131.1375,-5.E-02)); +#496155 = LINE('',#496156,#496157); +#496156 = CARTESIAN_POINT('',(146.3375,-131.1375,-5.E-02)); +#496157 = VECTOR('',#496158,1.); +#496158 = DIRECTION('',(1.,0.,0.)); +#496159 = ORIENTED_EDGE('',*,*,#496160,.T.); +#496160 = EDGE_CURVE('',#496153,#496161,#496163,.T.); +#496161 = VERTEX_POINT('',#496162); +#496162 = CARTESIAN_POINT('',(146.675,-131.025,-5.E-02)); +#496163 = CIRCLE('',#496164,0.112498336922); +#496164 = AXIS2_PLACEMENT_3D('',#496165,#496166,#496167); +#496165 = CARTESIAN_POINT('',(146.56250166309,-131.025001663,-5.E-02)); +#496166 = DIRECTION('',(0.,0.,1.)); +#496167 = DIRECTION('',(-1.478324218215E-05,-0.999999999891,0.)); +#496168 = ORIENTED_EDGE('',*,*,#496169,.T.); +#496169 = EDGE_CURVE('',#496161,#496108,#496170,.T.); +#496170 = LINE('',#496171,#496172); +#496171 = CARTESIAN_POINT('',(146.675,-131.025,-5.E-02)); +#496172 = VECTOR('',#496173,1.); +#496173 = DIRECTION('',(0.,1.,0.)); +#496174 = FACE_BOUND('',#496175,.T.); +#496175 = EDGE_LOOP('',(#496176,#496187,#496195,#496204,#496212,#496221, + #496229,#496238)); +#496176 = ORIENTED_EDGE('',*,*,#496177,.T.); +#496177 = EDGE_CURVE('',#496178,#496180,#496182,.T.); +#496178 = VERTEX_POINT('',#496179); +#496179 = CARTESIAN_POINT('',(147.975,-130.325,-5.E-02)); +#496180 = VERTEX_POINT('',#496181); +#496181 = CARTESIAN_POINT('',(147.8625,-130.2125,-5.E-02)); +#496182 = CIRCLE('',#496183,0.112498336922); +#496183 = AXIS2_PLACEMENT_3D('',#496184,#496185,#496186); +#496184 = CARTESIAN_POINT('',(147.86250166309,-130.3249983369,-5.E-02)); +#496185 = DIRECTION('',(0.,0.,1.)); +#496186 = DIRECTION('',(0.999999999891,-1.478324167686E-05,0.)); +#496187 = ORIENTED_EDGE('',*,*,#496188,.T.); +#496188 = EDGE_CURVE('',#496180,#496189,#496191,.T.); +#496189 = VERTEX_POINT('',#496190); +#496190 = CARTESIAN_POINT('',(147.6375,-130.2125,-5.E-02)); +#496191 = LINE('',#496192,#496193); +#496192 = CARTESIAN_POINT('',(147.8625,-130.2125,-5.E-02)); +#496193 = VECTOR('',#496194,1.); +#496194 = DIRECTION('',(-1.,0.,0.)); +#496195 = ORIENTED_EDGE('',*,*,#496196,.T.); +#496196 = EDGE_CURVE('',#496189,#496197,#496199,.T.); +#496197 = VERTEX_POINT('',#496198); +#496198 = CARTESIAN_POINT('',(147.525,-130.325,-5.E-02)); +#496199 = CIRCLE('',#496200,0.112498336922); +#496200 = AXIS2_PLACEMENT_3D('',#496201,#496202,#496203); +#496201 = CARTESIAN_POINT('',(147.63749833691,-130.3249983369,-5.E-02)); +#496202 = DIRECTION('',(0.,0.,1.)); +#496203 = DIRECTION('',(1.478324167686E-05,0.999999999891,-0.)); +#496204 = ORIENTED_EDGE('',*,*,#496205,.T.); +#496205 = EDGE_CURVE('',#496197,#496206,#496208,.T.); +#496206 = VERTEX_POINT('',#496207); +#496207 = CARTESIAN_POINT('',(147.525,-131.025,-5.E-02)); +#496208 = LINE('',#496209,#496210); +#496209 = CARTESIAN_POINT('',(147.525,-130.325,-5.E-02)); +#496210 = VECTOR('',#496211,1.); +#496211 = DIRECTION('',(0.,-1.,0.)); +#496212 = ORIENTED_EDGE('',*,*,#496213,.T.); +#496213 = EDGE_CURVE('',#496206,#496214,#496216,.T.); +#496214 = VERTEX_POINT('',#496215); +#496215 = CARTESIAN_POINT('',(147.6375,-131.1375,-5.E-02)); +#496216 = CIRCLE('',#496217,0.112498336922); +#496217 = AXIS2_PLACEMENT_3D('',#496218,#496219,#496220); +#496218 = CARTESIAN_POINT('',(147.63749833691,-131.025001663,-5.E-02)); +#496219 = DIRECTION('',(0.,0.,1.)); +#496220 = DIRECTION('',(-0.999999999891,1.478324167687E-05,0.)); +#496221 = ORIENTED_EDGE('',*,*,#496222,.T.); +#496222 = EDGE_CURVE('',#496214,#496223,#496225,.T.); +#496223 = VERTEX_POINT('',#496224); +#496224 = CARTESIAN_POINT('',(147.8625,-131.1375,-5.E-02)); +#496225 = LINE('',#496226,#496227); +#496226 = CARTESIAN_POINT('',(147.6375,-131.1375,-5.E-02)); +#496227 = VECTOR('',#496228,1.); +#496228 = DIRECTION('',(1.,0.,0.)); +#496229 = ORIENTED_EDGE('',*,*,#496230,.T.); +#496230 = EDGE_CURVE('',#496223,#496231,#496233,.T.); +#496231 = VERTEX_POINT('',#496232); +#496232 = CARTESIAN_POINT('',(147.975,-131.025,-5.E-02)); +#496233 = CIRCLE('',#496234,0.112498336922); +#496234 = AXIS2_PLACEMENT_3D('',#496235,#496236,#496237); +#496235 = CARTESIAN_POINT('',(147.86250166309,-131.025001663,-5.E-02)); +#496236 = DIRECTION('',(0.,0.,1.)); +#496237 = DIRECTION('',(-1.47832419295E-05,-0.999999999891,0.)); +#496238 = ORIENTED_EDGE('',*,*,#496239,.T.); +#496239 = EDGE_CURVE('',#496231,#496178,#496240,.T.); +#496240 = LINE('',#496241,#496242); +#496241 = CARTESIAN_POINT('',(147.975,-131.025,-5.E-02)); +#496242 = VECTOR('',#496243,1.); +#496243 = DIRECTION('',(0.,1.,0.)); +#496244 = FACE_BOUND('',#496245,.T.); +#496245 = EDGE_LOOP('',(#496246,#496257,#496265,#496274,#496282,#496291, + #496299,#496308)); +#496246 = ORIENTED_EDGE('',*,*,#496247,.T.); +#496247 = EDGE_CURVE('',#496248,#496250,#496252,.T.); +#496248 = VERTEX_POINT('',#496249); +#496249 = CARTESIAN_POINT('',(150.57,-130.505,-5.E-02)); +#496250 = VERTEX_POINT('',#496251); +#496251 = CARTESIAN_POINT('',(150.435,-130.37,-5.E-02)); +#496252 = CIRCLE('',#496253,0.135001418495); +#496253 = AXIS2_PLACEMENT_3D('',#496254,#496255,#496256); +#496254 = CARTESIAN_POINT('',(150.43499858151,-130.5050014184,-5.E-02)); +#496255 = DIRECTION('',(0.,0.,1.)); +#496256 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#496257 = ORIENTED_EDGE('',*,*,#496258,.T.); +#496258 = EDGE_CURVE('',#496250,#496259,#496261,.T.); +#496259 = VERTEX_POINT('',#496260); +#496260 = CARTESIAN_POINT('',(150.065,-130.37,-5.E-02)); +#496261 = LINE('',#496262,#496263); +#496262 = CARTESIAN_POINT('',(150.435,-130.37,-5.E-02)); +#496263 = VECTOR('',#496264,1.); +#496264 = DIRECTION('',(-1.,0.,0.)); +#496265 = ORIENTED_EDGE('',*,*,#496266,.T.); +#496266 = EDGE_CURVE('',#496259,#496267,#496269,.T.); +#496267 = VERTEX_POINT('',#496268); +#496268 = CARTESIAN_POINT('',(149.93,-130.505,-5.E-02)); +#496269 = CIRCLE('',#496270,0.135001418495); +#496270 = AXIS2_PLACEMENT_3D('',#496271,#496272,#496273); +#496271 = CARTESIAN_POINT('',(150.06500141848,-130.5050014184,-5.E-02)); +#496272 = DIRECTION('',(0.,0.,1.)); +#496273 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#496274 = ORIENTED_EDGE('',*,*,#496275,.T.); +#496275 = EDGE_CURVE('',#496267,#496276,#496278,.T.); +#496276 = VERTEX_POINT('',#496277); +#496277 = CARTESIAN_POINT('',(149.93,-130.775,-5.E-02)); +#496278 = LINE('',#496279,#496280); +#496279 = CARTESIAN_POINT('',(149.93,-130.505,-5.E-02)); +#496280 = VECTOR('',#496281,1.); +#496281 = DIRECTION('',(0.,-1.,0.)); +#496282 = ORIENTED_EDGE('',*,*,#496283,.T.); +#496283 = EDGE_CURVE('',#496276,#496284,#496286,.T.); +#496284 = VERTEX_POINT('',#496285); +#496285 = CARTESIAN_POINT('',(150.065,-130.91,-5.E-02)); +#496286 = CIRCLE('',#496287,0.135001418495); +#496287 = AXIS2_PLACEMENT_3D('',#496288,#496289,#496290); +#496288 = CARTESIAN_POINT('',(150.06500141848,-130.7749985815,-5.E-02)); +#496289 = DIRECTION('',(0.,0.,1.)); +#496290 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#496291 = ORIENTED_EDGE('',*,*,#496292,.T.); +#496292 = EDGE_CURVE('',#496284,#496293,#496295,.T.); +#496293 = VERTEX_POINT('',#496294); +#496294 = CARTESIAN_POINT('',(150.435,-130.91,-5.E-02)); +#496295 = LINE('',#496296,#496297); +#496296 = CARTESIAN_POINT('',(150.065,-130.91,-5.E-02)); +#496297 = VECTOR('',#496298,1.); +#496298 = DIRECTION('',(1.,0.,0.)); +#496299 = ORIENTED_EDGE('',*,*,#496300,.T.); +#496300 = EDGE_CURVE('',#496293,#496301,#496303,.T.); +#496301 = VERTEX_POINT('',#496302); +#496302 = CARTESIAN_POINT('',(150.57,-130.775,-5.E-02)); +#496303 = CIRCLE('',#496304,0.135001418495); +#496304 = AXIS2_PLACEMENT_3D('',#496305,#496306,#496307); +#496305 = CARTESIAN_POINT('',(150.43499858151,-130.7749985815,-5.E-02)); +#496306 = DIRECTION('',(0.,0.,1.)); +#496307 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#496308 = ORIENTED_EDGE('',*,*,#496309,.T.); +#496309 = EDGE_CURVE('',#496301,#496248,#496310,.T.); +#496310 = LINE('',#496311,#496312); +#496311 = CARTESIAN_POINT('',(150.57,-130.775,-5.E-02)); +#496312 = VECTOR('',#496313,1.); +#496313 = DIRECTION('',(0.,1.,0.)); +#496314 = FACE_BOUND('',#496315,.T.); +#496315 = EDGE_LOOP('',(#496316,#496327,#496335,#496344,#496352,#496361, + #496369,#496378)); +#496316 = ORIENTED_EDGE('',*,*,#496317,.T.); +#496317 = EDGE_CURVE('',#496318,#496320,#496322,.T.); +#496318 = VERTEX_POINT('',#496319); +#496319 = CARTESIAN_POINT('',(146.92,-128.715,-5.E-02)); +#496320 = VERTEX_POINT('',#496321); +#496321 = CARTESIAN_POINT('',(146.785,-128.58,-5.E-02)); +#496322 = CIRCLE('',#496323,0.135001418495); +#496323 = AXIS2_PLACEMENT_3D('',#496324,#496325,#496326); +#496324 = CARTESIAN_POINT('',(146.78499858151,-128.7150014184,-5.E-02)); +#496325 = DIRECTION('',(0.,0.,1.)); +#496326 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#496327 = ORIENTED_EDGE('',*,*,#496328,.T.); +#496328 = EDGE_CURVE('',#496320,#496329,#496331,.T.); +#496329 = VERTEX_POINT('',#496330); +#496330 = CARTESIAN_POINT('',(146.515,-128.58,-5.E-02)); +#496331 = LINE('',#496332,#496333); +#496332 = CARTESIAN_POINT('',(146.785,-128.58,-5.E-02)); +#496333 = VECTOR('',#496334,1.); +#496334 = DIRECTION('',(-1.,0.,0.)); +#496335 = ORIENTED_EDGE('',*,*,#496336,.T.); +#496336 = EDGE_CURVE('',#496329,#496337,#496339,.T.); +#496337 = VERTEX_POINT('',#496338); +#496338 = CARTESIAN_POINT('',(146.38,-128.715,-5.E-02)); +#496339 = CIRCLE('',#496340,0.135001418495); +#496340 = AXIS2_PLACEMENT_3D('',#496341,#496342,#496343); +#496341 = CARTESIAN_POINT('',(146.51500141848,-128.7150014184,-5.E-02)); +#496342 = DIRECTION('',(0.,0.,1.)); +#496343 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#496344 = ORIENTED_EDGE('',*,*,#496345,.T.); +#496345 = EDGE_CURVE('',#496337,#496346,#496348,.T.); +#496346 = VERTEX_POINT('',#496347); +#496347 = CARTESIAN_POINT('',(146.38,-129.085,-5.E-02)); +#496348 = LINE('',#496349,#496350); +#496349 = CARTESIAN_POINT('',(146.38,-128.715,-5.E-02)); +#496350 = VECTOR('',#496351,1.); +#496351 = DIRECTION('',(0.,-1.,0.)); +#496352 = ORIENTED_EDGE('',*,*,#496353,.T.); +#496353 = EDGE_CURVE('',#496346,#496354,#496356,.T.); +#496354 = VERTEX_POINT('',#496355); +#496355 = CARTESIAN_POINT('',(146.515,-129.22,-5.E-02)); +#496356 = CIRCLE('',#496357,0.135001418495); +#496357 = AXIS2_PLACEMENT_3D('',#496358,#496359,#496360); +#496358 = CARTESIAN_POINT('',(146.51500141848,-129.0849985815,-5.E-02)); +#496359 = DIRECTION('',(0.,0.,1.)); +#496360 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#496361 = ORIENTED_EDGE('',*,*,#496362,.T.); +#496362 = EDGE_CURVE('',#496354,#496363,#496365,.T.); +#496363 = VERTEX_POINT('',#496364); +#496364 = CARTESIAN_POINT('',(146.785,-129.22,-5.E-02)); +#496365 = LINE('',#496366,#496367); +#496366 = CARTESIAN_POINT('',(146.515,-129.22,-5.E-02)); +#496367 = VECTOR('',#496368,1.); +#496368 = DIRECTION('',(1.,0.,0.)); +#496369 = ORIENTED_EDGE('',*,*,#496370,.T.); +#496370 = EDGE_CURVE('',#496363,#496371,#496373,.T.); +#496371 = VERTEX_POINT('',#496372); +#496372 = CARTESIAN_POINT('',(146.92,-129.085,-5.E-02)); +#496373 = CIRCLE('',#496374,0.135001418495); +#496374 = AXIS2_PLACEMENT_3D('',#496375,#496376,#496377); +#496375 = CARTESIAN_POINT('',(146.78499858151,-129.0849985815,-5.E-02)); +#496376 = DIRECTION('',(0.,0.,1.)); +#496377 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#496378 = ORIENTED_EDGE('',*,*,#496379,.T.); +#496379 = EDGE_CURVE('',#496371,#496318,#496380,.T.); +#496380 = LINE('',#496381,#496382); +#496381 = CARTESIAN_POINT('',(146.92,-129.085,-5.E-02)); +#496382 = VECTOR('',#496383,1.); +#496383 = DIRECTION('',(0.,1.,0.)); +#496384 = FACE_BOUND('',#496385,.T.); +#496385 = EDGE_LOOP('',(#496386,#496397,#496405,#496414,#496422,#496431, + #496439,#496448)); +#496386 = ORIENTED_EDGE('',*,*,#496387,.T.); +#496387 = EDGE_CURVE('',#496388,#496390,#496392,.T.); +#496388 = VERTEX_POINT('',#496389); +#496389 = CARTESIAN_POINT('',(147.94,-128.715,-5.E-02)); +#496390 = VERTEX_POINT('',#496391); +#496391 = CARTESIAN_POINT('',(147.805,-128.58,-5.E-02)); +#496392 = CIRCLE('',#496393,0.135001418495); +#496393 = AXIS2_PLACEMENT_3D('',#496394,#496395,#496396); +#496394 = CARTESIAN_POINT('',(147.80499858151,-128.7150014184,-5.E-02)); +#496395 = DIRECTION('',(0.,0.,1.)); +#496396 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#496397 = ORIENTED_EDGE('',*,*,#496398,.T.); +#496398 = EDGE_CURVE('',#496390,#496399,#496401,.T.); +#496399 = VERTEX_POINT('',#496400); +#496400 = CARTESIAN_POINT('',(147.535,-128.58,-5.E-02)); +#496401 = LINE('',#496402,#496403); +#496402 = CARTESIAN_POINT('',(147.805,-128.58,-5.E-02)); +#496403 = VECTOR('',#496404,1.); +#496404 = DIRECTION('',(-1.,0.,0.)); +#496405 = ORIENTED_EDGE('',*,*,#496406,.T.); +#496406 = EDGE_CURVE('',#496399,#496407,#496409,.T.); +#496407 = VERTEX_POINT('',#496408); +#496408 = CARTESIAN_POINT('',(147.4,-128.715,-5.E-02)); +#496409 = CIRCLE('',#496410,0.135001418495); +#496410 = AXIS2_PLACEMENT_3D('',#496411,#496412,#496413); +#496411 = CARTESIAN_POINT('',(147.53500141848,-128.7150014184,-5.E-02)); +#496412 = DIRECTION('',(0.,0.,1.)); +#496413 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#496414 = ORIENTED_EDGE('',*,*,#496415,.T.); +#496415 = EDGE_CURVE('',#496407,#496416,#496418,.T.); +#496416 = VERTEX_POINT('',#496417); +#496417 = CARTESIAN_POINT('',(147.4,-129.085,-5.E-02)); +#496418 = LINE('',#496419,#496420); +#496419 = CARTESIAN_POINT('',(147.4,-128.715,-5.E-02)); +#496420 = VECTOR('',#496421,1.); +#496421 = DIRECTION('',(0.,-1.,0.)); +#496422 = ORIENTED_EDGE('',*,*,#496423,.T.); +#496423 = EDGE_CURVE('',#496416,#496424,#496426,.T.); +#496424 = VERTEX_POINT('',#496425); +#496425 = CARTESIAN_POINT('',(147.535,-129.22,-5.E-02)); +#496426 = CIRCLE('',#496427,0.135001418495); +#496427 = AXIS2_PLACEMENT_3D('',#496428,#496429,#496430); +#496428 = CARTESIAN_POINT('',(147.53500141848,-129.0849985815,-5.E-02)); +#496429 = DIRECTION('',(0.,0.,1.)); +#496430 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#496431 = ORIENTED_EDGE('',*,*,#496432,.T.); +#496432 = EDGE_CURVE('',#496424,#496433,#496435,.T.); +#496433 = VERTEX_POINT('',#496434); +#496434 = CARTESIAN_POINT('',(147.805,-129.22,-5.E-02)); +#496435 = LINE('',#496436,#496437); +#496436 = CARTESIAN_POINT('',(147.535,-129.22,-5.E-02)); +#496437 = VECTOR('',#496438,1.); +#496438 = DIRECTION('',(1.,0.,0.)); +#496439 = ORIENTED_EDGE('',*,*,#496440,.T.); +#496440 = EDGE_CURVE('',#496433,#496441,#496443,.T.); +#496441 = VERTEX_POINT('',#496442); +#496442 = CARTESIAN_POINT('',(147.94,-129.085,-5.E-02)); +#496443 = CIRCLE('',#496444,0.135001418495); +#496444 = AXIS2_PLACEMENT_3D('',#496445,#496446,#496447); +#496445 = CARTESIAN_POINT('',(147.80499858151,-129.0849985815,-5.E-02)); +#496446 = DIRECTION('',(0.,0.,1.)); +#496447 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#496448 = ORIENTED_EDGE('',*,*,#496449,.T.); +#496449 = EDGE_CURVE('',#496441,#496388,#496450,.T.); +#496450 = LINE('',#496451,#496452); +#496451 = CARTESIAN_POINT('',(147.94,-129.085,-5.E-02)); +#496452 = VECTOR('',#496453,1.); +#496453 = DIRECTION('',(0.,1.,0.)); +#496454 = FACE_BOUND('',#496455,.T.); +#496455 = EDGE_LOOP('',(#496456,#496467,#496475,#496484,#496492,#496501, + #496509,#496518)); +#496456 = ORIENTED_EDGE('',*,*,#496457,.T.); +#496457 = EDGE_CURVE('',#496458,#496460,#496462,.T.); +#496458 = VERTEX_POINT('',#496459); +#496459 = CARTESIAN_POINT('',(150.85,-128.225,-5.E-02)); +#496460 = VERTEX_POINT('',#496461); +#496461 = CARTESIAN_POINT('',(150.625,-128.,-5.E-02)); +#496462 = CIRCLE('',#496463,0.225000087974); +#496463 = AXIS2_PLACEMENT_3D('',#496464,#496465,#496466); +#496464 = CARTESIAN_POINT('',(150.62499991202,-128.2250000879,-5.E-02)); +#496465 = DIRECTION('',(0.,0.,1.)); +#496466 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#496467 = ORIENTED_EDGE('',*,*,#496468,.T.); +#496468 = EDGE_CURVE('',#496460,#496469,#496471,.T.); +#496469 = VERTEX_POINT('',#496470); +#496470 = CARTESIAN_POINT('',(149.875,-128.,-5.E-02)); +#496471 = LINE('',#496472,#496473); +#496472 = CARTESIAN_POINT('',(150.625,-128.,-5.E-02)); +#496473 = VECTOR('',#496474,1.); +#496474 = DIRECTION('',(-1.,0.,0.)); +#496475 = ORIENTED_EDGE('',*,*,#496476,.T.); +#496476 = EDGE_CURVE('',#496469,#496477,#496479,.T.); +#496477 = VERTEX_POINT('',#496478); +#496478 = CARTESIAN_POINT('',(149.65,-128.225,-5.E-02)); +#496479 = CIRCLE('',#496480,0.225000087974); +#496480 = AXIS2_PLACEMENT_3D('',#496481,#496482,#496483); +#496481 = CARTESIAN_POINT('',(149.87500008797,-128.2250000879,-5.E-02)); +#496482 = DIRECTION('',(0.,0.,1.)); +#496483 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#496484 = ORIENTED_EDGE('',*,*,#496485,.T.); +#496485 = EDGE_CURVE('',#496477,#496486,#496488,.T.); +#496486 = VERTEX_POINT('',#496487); +#496487 = CARTESIAN_POINT('',(149.65,-128.675,-5.E-02)); +#496488 = LINE('',#496489,#496490); +#496489 = CARTESIAN_POINT('',(149.65,-128.225,-5.E-02)); +#496490 = VECTOR('',#496491,1.); +#496491 = DIRECTION('',(0.,-1.,0.)); +#496492 = ORIENTED_EDGE('',*,*,#496493,.T.); +#496493 = EDGE_CURVE('',#496486,#496494,#496496,.T.); +#496494 = VERTEX_POINT('',#496495); +#496495 = CARTESIAN_POINT('',(149.875,-128.9,-5.E-02)); +#496496 = CIRCLE('',#496497,0.225000087974); +#496497 = AXIS2_PLACEMENT_3D('',#496498,#496499,#496500); +#496498 = CARTESIAN_POINT('',(149.87500008797,-128.674999912,-5.E-02)); +#496499 = DIRECTION('',(0.,0.,1.)); +#496500 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#496501 = ORIENTED_EDGE('',*,*,#496502,.T.); +#496502 = EDGE_CURVE('',#496494,#496503,#496505,.T.); +#496503 = VERTEX_POINT('',#496504); +#496504 = CARTESIAN_POINT('',(150.625,-128.9,-5.E-02)); +#496505 = LINE('',#496506,#496507); +#496506 = CARTESIAN_POINT('',(149.875,-128.9,-5.E-02)); +#496507 = VECTOR('',#496508,1.); +#496508 = DIRECTION('',(1.,0.,0.)); +#496509 = ORIENTED_EDGE('',*,*,#496510,.T.); +#496510 = EDGE_CURVE('',#496503,#496511,#496513,.T.); +#496511 = VERTEX_POINT('',#496512); +#496512 = CARTESIAN_POINT('',(150.85,-128.675,-5.E-02)); +#496513 = CIRCLE('',#496514,0.225000087974); +#496514 = AXIS2_PLACEMENT_3D('',#496515,#496516,#496517); +#496515 = CARTESIAN_POINT('',(150.62499991202,-128.674999912,-5.E-02)); +#496516 = DIRECTION('',(0.,0.,1.)); +#496517 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#496518 = ORIENTED_EDGE('',*,*,#496519,.T.); +#496519 = EDGE_CURVE('',#496511,#496458,#496520,.T.); +#496520 = LINE('',#496521,#496522); +#496521 = CARTESIAN_POINT('',(150.85,-128.675,-5.E-02)); +#496522 = VECTOR('',#496523,1.); +#496523 = DIRECTION('',(0.,1.,0.)); +#496524 = FACE_BOUND('',#496525,.T.); +#496525 = EDGE_LOOP('',(#496526)); +#496526 = ORIENTED_EDGE('',*,*,#496527,.T.); +#496527 = EDGE_CURVE('',#496528,#496528,#496530,.T.); +#496528 = VERTEX_POINT('',#496529); +#496529 = CARTESIAN_POINT('',(124.7155,-127.5,-5.E-02)); +#496530 = CIRCLE('',#496531,0.7155); +#496531 = AXIS2_PLACEMENT_3D('',#496532,#496533,#496534); +#496532 = CARTESIAN_POINT('',(124.,-127.5,-5.E-02)); +#496533 = DIRECTION('',(0.,0.,1.)); +#496534 = DIRECTION('',(1.,0.,-0.)); +#496535 = FACE_BOUND('',#496536,.T.); +#496536 = EDGE_LOOP('',(#496537)); +#496537 = ORIENTED_EDGE('',*,*,#496538,.T.); +#496538 = EDGE_CURVE('',#496539,#496539,#496541,.T.); +#496539 = VERTEX_POINT('',#496540); +#496540 = CARTESIAN_POINT('',(126.7155,-127.5,-5.E-02)); +#496541 = CIRCLE('',#496542,0.7155); +#496542 = AXIS2_PLACEMENT_3D('',#496543,#496544,#496545); +#496543 = CARTESIAN_POINT('',(126.,-127.5,-5.E-02)); +#496544 = DIRECTION('',(0.,0.,1.)); +#496545 = DIRECTION('',(1.,0.,-0.)); +#496546 = FACE_BOUND('',#496547,.T.); +#496547 = EDGE_LOOP('',(#496548)); +#496548 = ORIENTED_EDGE('',*,*,#496549,.T.); +#496549 = EDGE_CURVE('',#496550,#496550,#496552,.T.); +#496550 = VERTEX_POINT('',#496551); +#496551 = CARTESIAN_POINT('',(128.7155,-127.5,-5.E-02)); +#496552 = CIRCLE('',#496553,0.7155); +#496553 = AXIS2_PLACEMENT_3D('',#496554,#496555,#496556); +#496554 = CARTESIAN_POINT('',(128.,-127.5,-5.E-02)); +#496555 = DIRECTION('',(0.,0.,1.)); +#496556 = DIRECTION('',(1.,0.,-0.)); +#496557 = FACE_BOUND('',#496558,.T.); +#496558 = EDGE_LOOP('',(#496559)); +#496559 = ORIENTED_EDGE('',*,*,#496560,.T.); +#496560 = EDGE_CURVE('',#496561,#496561,#496563,.T.); +#496561 = VERTEX_POINT('',#496562); +#496562 = CARTESIAN_POINT('',(130.7155,-127.5,-5.E-02)); +#496563 = CIRCLE('',#496564,0.7155); +#496564 = AXIS2_PLACEMENT_3D('',#496565,#496566,#496567); +#496565 = CARTESIAN_POINT('',(130.,-127.5,-5.E-02)); +#496566 = DIRECTION('',(0.,0.,1.)); +#496567 = DIRECTION('',(1.,0.,-0.)); +#496568 = FACE_BOUND('',#496569,.T.); +#496569 = EDGE_LOOP('',(#496570)); +#496570 = ORIENTED_EDGE('',*,*,#496571,.T.); +#496571 = EDGE_CURVE('',#496572,#496572,#496574,.T.); +#496572 = VERTEX_POINT('',#496573); +#496573 = CARTESIAN_POINT('',(132.7155,-127.5,-5.E-02)); +#496574 = CIRCLE('',#496575,0.7155); +#496575 = AXIS2_PLACEMENT_3D('',#496576,#496577,#496578); +#496576 = CARTESIAN_POINT('',(132.,-127.5,-5.E-02)); +#496577 = DIRECTION('',(0.,0.,1.)); +#496578 = DIRECTION('',(1.,0.,-0.)); +#496579 = FACE_BOUND('',#496580,.T.); +#496580 = EDGE_LOOP('',(#496581)); +#496581 = ORIENTED_EDGE('',*,*,#496582,.T.); +#496582 = EDGE_CURVE('',#496583,#496583,#496585,.T.); +#496583 = VERTEX_POINT('',#496584); +#496584 = CARTESIAN_POINT('',(134.7155,-127.5,-5.E-02)); +#496585 = CIRCLE('',#496586,0.7155); +#496586 = AXIS2_PLACEMENT_3D('',#496587,#496588,#496589); +#496587 = CARTESIAN_POINT('',(134.,-127.5,-5.E-02)); +#496588 = DIRECTION('',(0.,0.,1.)); +#496589 = DIRECTION('',(1.,0.,-0.)); +#496590 = FACE_BOUND('',#496591,.T.); +#496591 = EDGE_LOOP('',(#496592)); +#496592 = ORIENTED_EDGE('',*,*,#496593,.T.); +#496593 = EDGE_CURVE('',#496594,#496594,#496596,.T.); +#496594 = VERTEX_POINT('',#496595); +#496595 = CARTESIAN_POINT('',(136.7155,-127.5,-5.E-02)); +#496596 = CIRCLE('',#496597,0.7155); +#496597 = AXIS2_PLACEMENT_3D('',#496598,#496599,#496600); +#496598 = CARTESIAN_POINT('',(136.,-127.5,-5.E-02)); +#496599 = DIRECTION('',(0.,0.,1.)); +#496600 = DIRECTION('',(1.,0.,-0.)); +#496601 = FACE_BOUND('',#496602,.T.); +#496602 = EDGE_LOOP('',(#496603)); +#496603 = ORIENTED_EDGE('',*,*,#496604,.T.); +#496604 = EDGE_CURVE('',#496605,#496605,#496607,.T.); +#496605 = VERTEX_POINT('',#496606); +#496606 = CARTESIAN_POINT('',(138.7155,-127.5,-5.E-02)); +#496607 = CIRCLE('',#496608,0.7155); +#496608 = AXIS2_PLACEMENT_3D('',#496609,#496610,#496611); +#496609 = CARTESIAN_POINT('',(138.,-127.5,-5.E-02)); +#496610 = DIRECTION('',(0.,0.,1.)); +#496611 = DIRECTION('',(1.,0.,-0.)); +#496612 = FACE_BOUND('',#496613,.T.); +#496613 = EDGE_LOOP('',(#496614)); +#496614 = ORIENTED_EDGE('',*,*,#496615,.T.); +#496615 = EDGE_CURVE('',#496616,#496616,#496618,.T.); +#496616 = VERTEX_POINT('',#496617); +#496617 = CARTESIAN_POINT('',(140.7155,-127.5,-5.E-02)); +#496618 = CIRCLE('',#496619,0.7155); +#496619 = AXIS2_PLACEMENT_3D('',#496620,#496621,#496622); +#496620 = CARTESIAN_POINT('',(140.,-127.5,-5.E-02)); +#496621 = DIRECTION('',(0.,0.,1.)); +#496622 = DIRECTION('',(1.,0.,-0.)); +#496623 = FACE_BOUND('',#496624,.T.); +#496624 = EDGE_LOOP('',(#496625)); +#496625 = ORIENTED_EDGE('',*,*,#496626,.T.); +#496626 = EDGE_CURVE('',#496627,#496627,#496629,.T.); +#496627 = VERTEX_POINT('',#496628); +#496628 = CARTESIAN_POINT('',(142.7155,-127.5,-5.E-02)); +#496629 = CIRCLE('',#496630,0.7155); +#496630 = AXIS2_PLACEMENT_3D('',#496631,#496632,#496633); +#496631 = CARTESIAN_POINT('',(142.,-127.5,-5.E-02)); +#496632 = DIRECTION('',(0.,0.,1.)); +#496633 = DIRECTION('',(1.,0.,-0.)); +#496634 = FACE_BOUND('',#496635,.T.); +#496635 = EDGE_LOOP('',(#496636,#496647,#496655,#496664,#496672,#496681, + #496689,#496698)); +#496636 = ORIENTED_EDGE('',*,*,#496637,.T.); +#496637 = EDGE_CURVE('',#496638,#496640,#496642,.T.); +#496638 = VERTEX_POINT('',#496639); +#496639 = CARTESIAN_POINT('',(146.5875,-126.7,-5.E-02)); +#496640 = VERTEX_POINT('',#496641); +#496641 = CARTESIAN_POINT('',(146.4375,-126.55,-5.E-02)); +#496642 = CIRCLE('',#496643,0.150000058649); +#496643 = AXIS2_PLACEMENT_3D('',#496644,#496645,#496646); +#496644 = CARTESIAN_POINT('',(146.43749994135,-126.7000000586,-5.E-02)); +#496645 = DIRECTION('',(0.,0.,1.)); +#496646 = DIRECTION('',(1.,3.909955037148E-07,-0.)); +#496647 = ORIENTED_EDGE('',*,*,#496648,.T.); +#496648 = EDGE_CURVE('',#496640,#496649,#496651,.T.); +#496649 = VERTEX_POINT('',#496650); +#496650 = CARTESIAN_POINT('',(145.2625,-126.55,-5.E-02)); +#496651 = LINE('',#496652,#496653); +#496652 = CARTESIAN_POINT('',(146.4375,-126.55,-5.E-02)); +#496653 = VECTOR('',#496654,1.); +#496654 = DIRECTION('',(-1.,0.,0.)); +#496655 = ORIENTED_EDGE('',*,*,#496656,.T.); +#496656 = EDGE_CURVE('',#496649,#496657,#496659,.T.); +#496657 = VERTEX_POINT('',#496658); +#496658 = CARTESIAN_POINT('',(145.1125,-126.7,-5.E-02)); +#496659 = CIRCLE('',#496660,0.150000058649); +#496660 = AXIS2_PLACEMENT_3D('',#496661,#496662,#496663); +#496661 = CARTESIAN_POINT('',(145.26250005864,-126.7000000586,-5.E-02)); +#496662 = DIRECTION('',(0.,0.,1.)); +#496663 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#496664 = ORIENTED_EDGE('',*,*,#496665,.T.); +#496665 = EDGE_CURVE('',#496657,#496666,#496668,.T.); +#496666 = VERTEX_POINT('',#496667); +#496667 = CARTESIAN_POINT('',(145.1125,-127.,-5.E-02)); +#496668 = LINE('',#496669,#496670); +#496669 = CARTESIAN_POINT('',(145.1125,-126.7,-5.E-02)); +#496670 = VECTOR('',#496671,1.); +#496671 = DIRECTION('',(0.,-1.,0.)); +#496672 = ORIENTED_EDGE('',*,*,#496673,.T.); +#496673 = EDGE_CURVE('',#496666,#496674,#496676,.T.); +#496674 = VERTEX_POINT('',#496675); +#496675 = CARTESIAN_POINT('',(145.2625,-127.15,-5.E-02)); +#496676 = CIRCLE('',#496677,0.150000058649); +#496677 = AXIS2_PLACEMENT_3D('',#496678,#496679,#496680); +#496678 = CARTESIAN_POINT('',(145.26250005864,-126.9999999413,-5.E-02)); +#496679 = DIRECTION('',(0.,0.,1.)); +#496680 = DIRECTION('',(-1.,-3.90995124759E-07,0.)); +#496681 = ORIENTED_EDGE('',*,*,#496682,.T.); +#496682 = EDGE_CURVE('',#496674,#496683,#496685,.T.); +#496683 = VERTEX_POINT('',#496684); +#496684 = CARTESIAN_POINT('',(146.4375,-127.15,-5.E-02)); +#496685 = LINE('',#496686,#496687); +#496686 = CARTESIAN_POINT('',(145.2625,-127.15,-5.E-02)); +#496687 = VECTOR('',#496688,1.); +#496688 = DIRECTION('',(1.,0.,0.)); +#496689 = ORIENTED_EDGE('',*,*,#496690,.T.); +#496690 = EDGE_CURVE('',#496683,#496691,#496693,.T.); +#496691 = VERTEX_POINT('',#496692); +#496692 = CARTESIAN_POINT('',(146.5875,-127.,-5.E-02)); +#496693 = CIRCLE('',#496694,0.150000058649); +#496694 = AXIS2_PLACEMENT_3D('',#496695,#496696,#496697); +#496695 = CARTESIAN_POINT('',(146.43749994135,-126.9999999413,-5.E-02)); +#496696 = DIRECTION('',(0.,0.,1.)); +#496697 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#496698 = ORIENTED_EDGE('',*,*,#496699,.T.); +#496699 = EDGE_CURVE('',#496691,#496638,#496700,.T.); +#496700 = LINE('',#496701,#496702); +#496701 = CARTESIAN_POINT('',(146.5875,-127.,-5.E-02)); +#496702 = VECTOR('',#496703,1.); +#496703 = DIRECTION('',(0.,1.,0.)); +#496704 = FACE_BOUND('',#496705,.T.); +#496705 = EDGE_LOOP('',(#496706,#496717,#496725,#496734,#496742,#496751, + #496759,#496768)); +#496706 = ORIENTED_EDGE('',*,*,#496707,.T.); +#496707 = EDGE_CURVE('',#496708,#496710,#496712,.T.); +#496708 = VERTEX_POINT('',#496709); +#496709 = CARTESIAN_POINT('',(148.4625,-125.75,-5.E-02)); +#496710 = VERTEX_POINT('',#496711); +#496711 = CARTESIAN_POINT('',(148.3125,-125.6,-5.E-02)); +#496712 = CIRCLE('',#496713,0.150000058649); +#496713 = AXIS2_PLACEMENT_3D('',#496714,#496715,#496716); +#496714 = CARTESIAN_POINT('',(148.31249994135,-125.7500000586,-5.E-02)); +#496715 = DIRECTION('',(0.,0.,1.)); +#496716 = DIRECTION('',(1.,3.909955037148E-07,-0.)); +#496717 = ORIENTED_EDGE('',*,*,#496718,.T.); +#496718 = EDGE_CURVE('',#496710,#496719,#496721,.T.); +#496719 = VERTEX_POINT('',#496720); +#496720 = CARTESIAN_POINT('',(147.1375,-125.6,-5.E-02)); +#496721 = LINE('',#496722,#496723); +#496722 = CARTESIAN_POINT('',(148.3125,-125.6,-5.E-02)); +#496723 = VECTOR('',#496724,1.); +#496724 = DIRECTION('',(-1.,0.,0.)); +#496725 = ORIENTED_EDGE('',*,*,#496726,.T.); +#496726 = EDGE_CURVE('',#496719,#496727,#496729,.T.); +#496727 = VERTEX_POINT('',#496728); +#496728 = CARTESIAN_POINT('',(146.9875,-125.75,-5.E-02)); +#496729 = CIRCLE('',#496730,0.150000058649); +#496730 = AXIS2_PLACEMENT_3D('',#496731,#496732,#496733); +#496731 = CARTESIAN_POINT('',(147.13750005864,-125.7500000586,-5.E-02)); +#496732 = DIRECTION('',(0.,0.,1.)); +#496733 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#496734 = ORIENTED_EDGE('',*,*,#496735,.T.); +#496735 = EDGE_CURVE('',#496727,#496736,#496738,.T.); +#496736 = VERTEX_POINT('',#496737); +#496737 = CARTESIAN_POINT('',(146.9875,-126.05,-5.E-02)); +#496738 = LINE('',#496739,#496740); +#496739 = CARTESIAN_POINT('',(146.9875,-125.75,-5.E-02)); +#496740 = VECTOR('',#496741,1.); +#496741 = DIRECTION('',(0.,-1.,0.)); +#496742 = ORIENTED_EDGE('',*,*,#496743,.T.); +#496743 = EDGE_CURVE('',#496736,#496744,#496746,.T.); +#496744 = VERTEX_POINT('',#496745); +#496745 = CARTESIAN_POINT('',(147.1375,-126.2,-5.E-02)); +#496746 = CIRCLE('',#496747,0.150000058649); +#496747 = AXIS2_PLACEMENT_3D('',#496748,#496749,#496750); +#496748 = CARTESIAN_POINT('',(147.13750005864,-126.0499999413,-5.E-02)); +#496749 = DIRECTION('',(0.,0.,1.)); +#496750 = DIRECTION('',(-1.,-3.90995124759E-07,0.)); +#496751 = ORIENTED_EDGE('',*,*,#496752,.T.); +#496752 = EDGE_CURVE('',#496744,#496753,#496755,.T.); +#496753 = VERTEX_POINT('',#496754); +#496754 = CARTESIAN_POINT('',(148.3125,-126.2,-5.E-02)); +#496755 = LINE('',#496756,#496757); +#496756 = CARTESIAN_POINT('',(147.1375,-126.2,-5.E-02)); +#496757 = VECTOR('',#496758,1.); +#496758 = DIRECTION('',(1.,0.,0.)); +#496759 = ORIENTED_EDGE('',*,*,#496760,.T.); +#496760 = EDGE_CURVE('',#496753,#496761,#496763,.T.); +#496761 = VERTEX_POINT('',#496762); +#496762 = CARTESIAN_POINT('',(148.4625,-126.05,-5.E-02)); +#496763 = CIRCLE('',#496764,0.150000058649); +#496764 = AXIS2_PLACEMENT_3D('',#496765,#496766,#496767); +#496765 = CARTESIAN_POINT('',(148.31249994135,-126.0499999413,-5.E-02)); +#496766 = DIRECTION('',(0.,0.,1.)); +#496767 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#496768 = ORIENTED_EDGE('',*,*,#496769,.T.); +#496769 = EDGE_CURVE('',#496761,#496708,#496770,.T.); +#496770 = LINE('',#496771,#496772); +#496771 = CARTESIAN_POINT('',(148.4625,-126.05,-5.E-02)); +#496772 = VECTOR('',#496773,1.); +#496773 = DIRECTION('',(0.,1.,0.)); +#496774 = FACE_BOUND('',#496775,.T.); +#496775 = EDGE_LOOP('',(#496776,#496787,#496795,#496804,#496812,#496821, + #496829,#496838)); +#496776 = ORIENTED_EDGE('',*,*,#496777,.T.); +#496777 = EDGE_CURVE('',#496778,#496780,#496782,.T.); +#496778 = VERTEX_POINT('',#496779); +#496779 = CARTESIAN_POINT('',(150.85,-124.925,-5.E-02)); +#496780 = VERTEX_POINT('',#496781); +#496781 = CARTESIAN_POINT('',(150.625,-124.7,-5.E-02)); +#496782 = CIRCLE('',#496783,0.225000087974); +#496783 = AXIS2_PLACEMENT_3D('',#496784,#496785,#496786); +#496784 = CARTESIAN_POINT('',(150.62499991202,-124.9250000879,-5.E-02)); +#496785 = DIRECTION('',(0.,0.,1.)); +#496786 = DIRECTION('',(1.,3.909953458166E-07,-0.)); +#496787 = ORIENTED_EDGE('',*,*,#496788,.T.); +#496788 = EDGE_CURVE('',#496780,#496789,#496791,.T.); +#496789 = VERTEX_POINT('',#496790); +#496790 = CARTESIAN_POINT('',(149.875,-124.7,-5.E-02)); +#496791 = LINE('',#496792,#496793); +#496792 = CARTESIAN_POINT('',(150.625,-124.7,-5.E-02)); +#496793 = VECTOR('',#496794,1.); +#496794 = DIRECTION('',(-1.,0.,0.)); +#496795 = ORIENTED_EDGE('',*,*,#496796,.T.); +#496796 = EDGE_CURVE('',#496789,#496797,#496799,.T.); +#496797 = VERTEX_POINT('',#496798); +#496798 = CARTESIAN_POINT('',(149.65,-124.925,-5.E-02)); +#496799 = CIRCLE('',#496800,0.225000087974); +#496800 = AXIS2_PLACEMENT_3D('',#496801,#496802,#496803); +#496801 = CARTESIAN_POINT('',(149.87500008797,-124.9250000879,-5.E-02)); +#496802 = DIRECTION('',(0.,0.,1.)); +#496803 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#496804 = ORIENTED_EDGE('',*,*,#496805,.T.); +#496805 = EDGE_CURVE('',#496797,#496806,#496808,.T.); +#496806 = VERTEX_POINT('',#496807); +#496807 = CARTESIAN_POINT('',(149.65,-125.375,-5.E-02)); +#496808 = LINE('',#496809,#496810); +#496809 = CARTESIAN_POINT('',(149.65,-124.925,-5.E-02)); +#496810 = VECTOR('',#496811,1.); +#496811 = DIRECTION('',(0.,-1.,0.)); +#496812 = ORIENTED_EDGE('',*,*,#496813,.T.); +#496813 = EDGE_CURVE('',#496806,#496814,#496816,.T.); +#496814 = VERTEX_POINT('',#496815); +#496815 = CARTESIAN_POINT('',(149.875,-125.6,-5.E-02)); +#496816 = CIRCLE('',#496817,0.225000087974); +#496817 = AXIS2_PLACEMENT_3D('',#496818,#496819,#496820); +#496818 = CARTESIAN_POINT('',(149.87500008797,-125.374999912,-5.E-02)); +#496819 = DIRECTION('',(0.,0.,1.)); +#496820 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#496821 = ORIENTED_EDGE('',*,*,#496822,.T.); +#496822 = EDGE_CURVE('',#496814,#496823,#496825,.T.); +#496823 = VERTEX_POINT('',#496824); +#496824 = CARTESIAN_POINT('',(150.625,-125.6,-5.E-02)); +#496825 = LINE('',#496826,#496827); +#496826 = CARTESIAN_POINT('',(149.875,-125.6,-5.E-02)); +#496827 = VECTOR('',#496828,1.); +#496828 = DIRECTION('',(1.,0.,0.)); +#496829 = ORIENTED_EDGE('',*,*,#496830,.T.); +#496830 = EDGE_CURVE('',#496823,#496831,#496833,.T.); +#496831 = VERTEX_POINT('',#496832); +#496832 = CARTESIAN_POINT('',(150.85,-125.375,-5.E-02)); +#496833 = CIRCLE('',#496834,0.225000087974); +#496834 = AXIS2_PLACEMENT_3D('',#496835,#496836,#496837); +#496835 = CARTESIAN_POINT('',(150.62499991202,-125.374999912,-5.E-02)); +#496836 = DIRECTION('',(0.,0.,1.)); +#496837 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#496838 = ORIENTED_EDGE('',*,*,#496839,.T.); +#496839 = EDGE_CURVE('',#496831,#496778,#496840,.T.); +#496840 = LINE('',#496841,#496842); +#496841 = CARTESIAN_POINT('',(150.85,-125.375,-5.E-02)); +#496842 = VECTOR('',#496843,1.); +#496843 = DIRECTION('',(0.,1.,0.)); +#496844 = FACE_BOUND('',#496845,.T.); +#496845 = EDGE_LOOP('',(#496846,#496857,#496865,#496874,#496882,#496891, + #496899,#496908)); +#496846 = ORIENTED_EDGE('',*,*,#496847,.T.); +#496847 = EDGE_CURVE('',#496848,#496850,#496852,.T.); +#496848 = VERTEX_POINT('',#496849); +#496849 = CARTESIAN_POINT('',(146.5875,-124.8,-5.E-02)); +#496850 = VERTEX_POINT('',#496851); +#496851 = CARTESIAN_POINT('',(146.4375,-124.65,-5.E-02)); +#496852 = CIRCLE('',#496853,0.150000058649); +#496853 = AXIS2_PLACEMENT_3D('',#496854,#496855,#496856); +#496854 = CARTESIAN_POINT('',(146.43749994135,-124.8000000586,-5.E-02)); +#496855 = DIRECTION('',(0.,0.,1.)); +#496856 = DIRECTION('',(1.,3.909955037149E-07,-0.)); +#496857 = ORIENTED_EDGE('',*,*,#496858,.T.); +#496858 = EDGE_CURVE('',#496850,#496859,#496861,.T.); +#496859 = VERTEX_POINT('',#496860); +#496860 = CARTESIAN_POINT('',(145.2625,-124.65,-5.E-02)); +#496861 = LINE('',#496862,#496863); +#496862 = CARTESIAN_POINT('',(146.4375,-124.65,-5.E-02)); +#496863 = VECTOR('',#496864,1.); +#496864 = DIRECTION('',(-1.,0.,0.)); +#496865 = ORIENTED_EDGE('',*,*,#496866,.T.); +#496866 = EDGE_CURVE('',#496859,#496867,#496869,.T.); +#496867 = VERTEX_POINT('',#496868); +#496868 = CARTESIAN_POINT('',(145.1125,-124.8,-5.E-02)); +#496869 = CIRCLE('',#496870,0.150000058649); +#496870 = AXIS2_PLACEMENT_3D('',#496871,#496872,#496873); +#496871 = CARTESIAN_POINT('',(145.26250005864,-124.8000000586,-5.E-02)); +#496872 = DIRECTION('',(0.,0.,1.)); +#496873 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#496874 = ORIENTED_EDGE('',*,*,#496875,.T.); +#496875 = EDGE_CURVE('',#496867,#496876,#496878,.T.); +#496876 = VERTEX_POINT('',#496877); +#496877 = CARTESIAN_POINT('',(145.1125,-125.1,-5.E-02)); +#496878 = LINE('',#496879,#496880); +#496879 = CARTESIAN_POINT('',(145.1125,-124.8,-5.E-02)); +#496880 = VECTOR('',#496881,1.); +#496881 = DIRECTION('',(0.,-1.,0.)); +#496882 = ORIENTED_EDGE('',*,*,#496883,.T.); +#496883 = EDGE_CURVE('',#496876,#496884,#496886,.T.); +#496884 = VERTEX_POINT('',#496885); +#496885 = CARTESIAN_POINT('',(145.2625,-125.25,-5.E-02)); +#496886 = CIRCLE('',#496887,0.150000058649); +#496887 = AXIS2_PLACEMENT_3D('',#496888,#496889,#496890); +#496888 = CARTESIAN_POINT('',(145.26250005864,-125.0999999413,-5.E-02)); +#496889 = DIRECTION('',(0.,0.,1.)); +#496890 = DIRECTION('',(-1.,-3.909950300201E-07,0.)); +#496891 = ORIENTED_EDGE('',*,*,#496892,.T.); +#496892 = EDGE_CURVE('',#496884,#496893,#496895,.T.); +#496893 = VERTEX_POINT('',#496894); +#496894 = CARTESIAN_POINT('',(146.4375,-125.25,-5.E-02)); +#496895 = LINE('',#496896,#496897); +#496896 = CARTESIAN_POINT('',(145.2625,-125.25,-5.E-02)); +#496897 = VECTOR('',#496898,1.); +#496898 = DIRECTION('',(1.,0.,0.)); +#496899 = ORIENTED_EDGE('',*,*,#496900,.T.); +#496900 = EDGE_CURVE('',#496893,#496901,#496903,.T.); +#496901 = VERTEX_POINT('',#496902); +#496902 = CARTESIAN_POINT('',(146.5875,-125.1,-5.E-02)); +#496903 = CIRCLE('',#496904,0.150000058649); +#496904 = AXIS2_PLACEMENT_3D('',#496905,#496906,#496907); +#496905 = CARTESIAN_POINT('',(146.43749994135,-125.0999999413,-5.E-02)); +#496906 = DIRECTION('',(0.,0.,1.)); +#496907 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#496908 = ORIENTED_EDGE('',*,*,#496909,.T.); +#496909 = EDGE_CURVE('',#496901,#496848,#496910,.T.); +#496910 = LINE('',#496911,#496912); +#496911 = CARTESIAN_POINT('',(146.5875,-125.1,-5.E-02)); +#496912 = VECTOR('',#496913,1.); +#496913 = DIRECTION('',(0.,1.,0.)); +#496914 = FACE_BOUND('',#496915,.T.); +#496915 = EDGE_LOOP('',(#496916,#496927,#496935,#496944,#496952,#496961, + #496969,#496978)); +#496916 = ORIENTED_EDGE('',*,*,#496917,.T.); +#496917 = EDGE_CURVE('',#496918,#496920,#496922,.T.); +#496918 = VERTEX_POINT('',#496919); +#496919 = CARTESIAN_POINT('',(125.27,-123.815,-5.E-02)); +#496920 = VERTEX_POINT('',#496921); +#496921 = CARTESIAN_POINT('',(125.135,-123.68,-5.E-02)); +#496922 = CIRCLE('',#496923,0.135001418495); +#496923 = AXIS2_PLACEMENT_3D('',#496924,#496925,#496926); +#496924 = CARTESIAN_POINT('',(125.13499858151,-123.8150014184,-5.E-02)); +#496925 = DIRECTION('',(0.,0.,1.)); +#496926 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#496927 = ORIENTED_EDGE('',*,*,#496928,.T.); +#496928 = EDGE_CURVE('',#496920,#496929,#496931,.T.); +#496929 = VERTEX_POINT('',#496930); +#496930 = CARTESIAN_POINT('',(124.865,-123.68,-5.E-02)); +#496931 = LINE('',#496932,#496933); +#496932 = CARTESIAN_POINT('',(125.135,-123.68,-5.E-02)); +#496933 = VECTOR('',#496934,1.); +#496934 = DIRECTION('',(-1.,0.,0.)); +#496935 = ORIENTED_EDGE('',*,*,#496936,.T.); +#496936 = EDGE_CURVE('',#496929,#496937,#496939,.T.); +#496937 = VERTEX_POINT('',#496938); +#496938 = CARTESIAN_POINT('',(124.73,-123.815,-5.E-02)); +#496939 = CIRCLE('',#496940,0.135001418495); +#496940 = AXIS2_PLACEMENT_3D('',#496941,#496942,#496943); +#496941 = CARTESIAN_POINT('',(124.86500141848,-123.8150014184,-5.E-02)); +#496942 = DIRECTION('',(0.,0.,1.)); +#496943 = DIRECTION('',(-1.050720662156E-05,0.999999999945,0.)); +#496944 = ORIENTED_EDGE('',*,*,#496945,.T.); +#496945 = EDGE_CURVE('',#496937,#496946,#496948,.T.); +#496946 = VERTEX_POINT('',#496947); +#496947 = CARTESIAN_POINT('',(124.73,-124.185,-5.E-02)); +#496948 = LINE('',#496949,#496950); +#496949 = CARTESIAN_POINT('',(124.73,-123.815,-5.E-02)); +#496950 = VECTOR('',#496951,1.); +#496951 = DIRECTION('',(0.,-1.,0.)); +#496952 = ORIENTED_EDGE('',*,*,#496953,.T.); +#496953 = EDGE_CURVE('',#496946,#496954,#496956,.T.); +#496954 = VERTEX_POINT('',#496955); +#496955 = CARTESIAN_POINT('',(124.865,-124.32,-5.E-02)); +#496956 = CIRCLE('',#496957,0.135001418495); +#496957 = AXIS2_PLACEMENT_3D('',#496958,#496959,#496960); +#496958 = CARTESIAN_POINT('',(124.86500141848,-124.1849985815,-5.E-02)); +#496959 = DIRECTION('',(0.,0.,1.)); +#496960 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#496961 = ORIENTED_EDGE('',*,*,#496962,.T.); +#496962 = EDGE_CURVE('',#496954,#496963,#496965,.T.); +#496963 = VERTEX_POINT('',#496964); +#496964 = CARTESIAN_POINT('',(125.135,-124.32,-5.E-02)); +#496965 = LINE('',#496966,#496967); +#496966 = CARTESIAN_POINT('',(124.865,-124.32,-5.E-02)); +#496967 = VECTOR('',#496968,1.); +#496968 = DIRECTION('',(1.,0.,0.)); +#496969 = ORIENTED_EDGE('',*,*,#496970,.T.); +#496970 = EDGE_CURVE('',#496963,#496971,#496973,.T.); +#496971 = VERTEX_POINT('',#496972); +#496972 = CARTESIAN_POINT('',(125.27,-124.185,-5.E-02)); +#496973 = CIRCLE('',#496974,0.135001418495); +#496974 = AXIS2_PLACEMENT_3D('',#496975,#496976,#496977); +#496975 = CARTESIAN_POINT('',(125.13499858151,-124.1849985815,-5.E-02)); +#496976 = DIRECTION('',(0.,0.,1.)); +#496977 = DIRECTION('',(1.050720662156E-05,-0.999999999945,0.)); +#496978 = ORIENTED_EDGE('',*,*,#496979,.T.); +#496979 = EDGE_CURVE('',#496971,#496918,#496980,.T.); +#496980 = LINE('',#496981,#496982); +#496981 = CARTESIAN_POINT('',(125.27,-124.185,-5.E-02)); +#496982 = VECTOR('',#496983,1.); +#496983 = DIRECTION('',(0.,1.,0.)); +#496984 = FACE_BOUND('',#496985,.T.); +#496985 = EDGE_LOOP('',(#496986,#496997,#497005,#497014,#497022,#497031, + #497039,#497048)); +#496986 = ORIENTED_EDGE('',*,*,#496987,.T.); +#496987 = EDGE_CURVE('',#496988,#496990,#496992,.T.); +#496988 = VERTEX_POINT('',#496989); +#496989 = CARTESIAN_POINT('',(126.29,-123.815,-5.E-02)); +#496990 = VERTEX_POINT('',#496991); +#496991 = CARTESIAN_POINT('',(126.155,-123.68,-5.E-02)); +#496992 = CIRCLE('',#496993,0.135001418495); +#496993 = AXIS2_PLACEMENT_3D('',#496994,#496995,#496996); +#496994 = CARTESIAN_POINT('',(126.15499858151,-123.8150014184,-5.E-02)); +#496995 = DIRECTION('',(0.,0.,1.)); +#496996 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#496997 = ORIENTED_EDGE('',*,*,#496998,.T.); +#496998 = EDGE_CURVE('',#496990,#496999,#497001,.T.); +#496999 = VERTEX_POINT('',#497000); +#497000 = CARTESIAN_POINT('',(125.885,-123.68,-5.E-02)); +#497001 = LINE('',#497002,#497003); +#497002 = CARTESIAN_POINT('',(126.155,-123.68,-5.E-02)); +#497003 = VECTOR('',#497004,1.); +#497004 = DIRECTION('',(-1.,0.,0.)); +#497005 = ORIENTED_EDGE('',*,*,#497006,.T.); +#497006 = EDGE_CURVE('',#496999,#497007,#497009,.T.); +#497007 = VERTEX_POINT('',#497008); +#497008 = CARTESIAN_POINT('',(125.75,-123.815,-5.E-02)); +#497009 = CIRCLE('',#497010,0.135001418495); +#497010 = AXIS2_PLACEMENT_3D('',#497011,#497012,#497013); +#497011 = CARTESIAN_POINT('',(125.88500141848,-123.8150014184,-5.E-02)); +#497012 = DIRECTION('',(0.,0.,1.)); +#497013 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497014 = ORIENTED_EDGE('',*,*,#497015,.T.); +#497015 = EDGE_CURVE('',#497007,#497016,#497018,.T.); +#497016 = VERTEX_POINT('',#497017); +#497017 = CARTESIAN_POINT('',(125.75,-124.185,-5.E-02)); +#497018 = LINE('',#497019,#497020); +#497019 = CARTESIAN_POINT('',(125.75,-123.815,-5.E-02)); +#497020 = VECTOR('',#497021,1.); +#497021 = DIRECTION('',(0.,-1.,0.)); +#497022 = ORIENTED_EDGE('',*,*,#497023,.T.); +#497023 = EDGE_CURVE('',#497016,#497024,#497026,.T.); +#497024 = VERTEX_POINT('',#497025); +#497025 = CARTESIAN_POINT('',(125.885,-124.32,-5.E-02)); +#497026 = CIRCLE('',#497027,0.135001418495); +#497027 = AXIS2_PLACEMENT_3D('',#497028,#497029,#497030); +#497028 = CARTESIAN_POINT('',(125.88500141848,-124.1849985815,-5.E-02)); +#497029 = DIRECTION('',(0.,0.,1.)); +#497030 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#497031 = ORIENTED_EDGE('',*,*,#497032,.T.); +#497032 = EDGE_CURVE('',#497024,#497033,#497035,.T.); +#497033 = VERTEX_POINT('',#497034); +#497034 = CARTESIAN_POINT('',(126.155,-124.32,-5.E-02)); +#497035 = LINE('',#497036,#497037); +#497036 = CARTESIAN_POINT('',(125.885,-124.32,-5.E-02)); +#497037 = VECTOR('',#497038,1.); +#497038 = DIRECTION('',(1.,0.,0.)); +#497039 = ORIENTED_EDGE('',*,*,#497040,.T.); +#497040 = EDGE_CURVE('',#497033,#497041,#497043,.T.); +#497041 = VERTEX_POINT('',#497042); +#497042 = CARTESIAN_POINT('',(126.29,-124.185,-5.E-02)); +#497043 = CIRCLE('',#497044,0.135001418495); +#497044 = AXIS2_PLACEMENT_3D('',#497045,#497046,#497047); +#497045 = CARTESIAN_POINT('',(126.15499858151,-124.1849985815,-5.E-02)); +#497046 = DIRECTION('',(0.,0.,1.)); +#497047 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497048 = ORIENTED_EDGE('',*,*,#497049,.T.); +#497049 = EDGE_CURVE('',#497041,#496988,#497050,.T.); +#497050 = LINE('',#497051,#497052); +#497051 = CARTESIAN_POINT('',(126.29,-124.185,-5.E-02)); +#497052 = VECTOR('',#497053,1.); +#497053 = DIRECTION('',(0.,1.,0.)); +#497054 = FACE_BOUND('',#497055,.T.); +#497055 = EDGE_LOOP('',(#497056,#497067,#497075,#497084,#497092,#497101, + #497109,#497118)); +#497056 = ORIENTED_EDGE('',*,*,#497057,.T.); +#497057 = EDGE_CURVE('',#497058,#497060,#497062,.T.); +#497058 = VERTEX_POINT('',#497059); +#497059 = CARTESIAN_POINT('',(146.32,-123.375,-5.E-02)); +#497060 = VERTEX_POINT('',#497061); +#497061 = CARTESIAN_POINT('',(146.185,-123.24,-5.E-02)); +#497062 = CIRCLE('',#497063,0.135001418495); +#497063 = AXIS2_PLACEMENT_3D('',#497064,#497065,#497066); +#497064 = CARTESIAN_POINT('',(146.18499858151,-123.3750014184,-5.E-02)); +#497065 = DIRECTION('',(0.,0.,1.)); +#497066 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#497067 = ORIENTED_EDGE('',*,*,#497068,.T.); +#497068 = EDGE_CURVE('',#497060,#497069,#497071,.T.); +#497069 = VERTEX_POINT('',#497070); +#497070 = CARTESIAN_POINT('',(145.815,-123.24,-5.E-02)); +#497071 = LINE('',#497072,#497073); +#497072 = CARTESIAN_POINT('',(146.185,-123.24,-5.E-02)); +#497073 = VECTOR('',#497074,1.); +#497074 = DIRECTION('',(-1.,0.,0.)); +#497075 = ORIENTED_EDGE('',*,*,#497076,.T.); +#497076 = EDGE_CURVE('',#497069,#497077,#497079,.T.); +#497077 = VERTEX_POINT('',#497078); +#497078 = CARTESIAN_POINT('',(145.68,-123.375,-5.E-02)); +#497079 = CIRCLE('',#497080,0.135001418495); +#497080 = AXIS2_PLACEMENT_3D('',#497081,#497082,#497083); +#497081 = CARTESIAN_POINT('',(145.81500141848,-123.3750014184,-5.E-02)); +#497082 = DIRECTION('',(0.,0.,1.)); +#497083 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#497084 = ORIENTED_EDGE('',*,*,#497085,.T.); +#497085 = EDGE_CURVE('',#497077,#497086,#497088,.T.); +#497086 = VERTEX_POINT('',#497087); +#497087 = CARTESIAN_POINT('',(145.68,-123.645,-5.E-02)); +#497088 = LINE('',#497089,#497090); +#497089 = CARTESIAN_POINT('',(145.68,-123.375,-5.E-02)); +#497090 = VECTOR('',#497091,1.); +#497091 = DIRECTION('',(0.,-1.,0.)); +#497092 = ORIENTED_EDGE('',*,*,#497093,.T.); +#497093 = EDGE_CURVE('',#497086,#497094,#497096,.T.); +#497094 = VERTEX_POINT('',#497095); +#497095 = CARTESIAN_POINT('',(145.815,-123.78,-5.E-02)); +#497096 = CIRCLE('',#497097,0.135001418495); +#497097 = AXIS2_PLACEMENT_3D('',#497098,#497099,#497100); +#497098 = CARTESIAN_POINT('',(145.81500141848,-123.6449985815,-5.E-02)); +#497099 = DIRECTION('',(0.,0.,1.)); +#497100 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#497101 = ORIENTED_EDGE('',*,*,#497102,.T.); +#497102 = EDGE_CURVE('',#497094,#497103,#497105,.T.); +#497103 = VERTEX_POINT('',#497104); +#497104 = CARTESIAN_POINT('',(146.185,-123.78,-5.E-02)); +#497105 = LINE('',#497106,#497107); +#497106 = CARTESIAN_POINT('',(145.815,-123.78,-5.E-02)); +#497107 = VECTOR('',#497108,1.); +#497108 = DIRECTION('',(1.,0.,0.)); +#497109 = ORIENTED_EDGE('',*,*,#497110,.T.); +#497110 = EDGE_CURVE('',#497103,#497111,#497113,.T.); +#497111 = VERTEX_POINT('',#497112); +#497112 = CARTESIAN_POINT('',(146.32,-123.645,-5.E-02)); +#497113 = CIRCLE('',#497114,0.135001418495); +#497114 = AXIS2_PLACEMENT_3D('',#497115,#497116,#497117); +#497115 = CARTESIAN_POINT('',(146.18499858151,-123.6449985815,-5.E-02)); +#497116 = DIRECTION('',(0.,0.,1.)); +#497117 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497118 = ORIENTED_EDGE('',*,*,#497119,.T.); +#497119 = EDGE_CURVE('',#497111,#497058,#497120,.T.); +#497120 = LINE('',#497121,#497122); +#497121 = CARTESIAN_POINT('',(146.32,-123.645,-5.E-02)); +#497122 = VECTOR('',#497123,1.); +#497123 = DIRECTION('',(0.,1.,0.)); +#497124 = FACE_BOUND('',#497125,.T.); +#497125 = EDGE_LOOP('',(#497126,#497137,#497145,#497154,#497162,#497171, + #497179,#497188)); +#497126 = ORIENTED_EDGE('',*,*,#497127,.T.); +#497127 = EDGE_CURVE('',#497128,#497130,#497132,.T.); +#497128 = VERTEX_POINT('',#497129); +#497129 = CARTESIAN_POINT('',(137.36,-122.615,-5.E-02)); +#497130 = VERTEX_POINT('',#497131); +#497131 = CARTESIAN_POINT('',(137.225,-122.48,-5.E-02)); +#497132 = CIRCLE('',#497133,0.135001418495); +#497133 = AXIS2_PLACEMENT_3D('',#497134,#497135,#497136); +#497134 = CARTESIAN_POINT('',(137.22499858151,-122.6150014184,-5.E-02)); +#497135 = DIRECTION('',(0.,0.,1.)); +#497136 = DIRECTION('',(0.999999999945,1.050720683208E-05,-0.)); +#497137 = ORIENTED_EDGE('',*,*,#497138,.T.); +#497138 = EDGE_CURVE('',#497130,#497139,#497141,.T.); +#497139 = VERTEX_POINT('',#497140); +#497140 = CARTESIAN_POINT('',(136.955,-122.48,-5.E-02)); +#497141 = LINE('',#497142,#497143); +#497142 = CARTESIAN_POINT('',(137.225,-122.48,-5.E-02)); +#497143 = VECTOR('',#497144,1.); +#497144 = DIRECTION('',(-1.,0.,0.)); +#497145 = ORIENTED_EDGE('',*,*,#497146,.T.); +#497146 = EDGE_CURVE('',#497139,#497147,#497149,.T.); +#497147 = VERTEX_POINT('',#497148); +#497148 = CARTESIAN_POINT('',(136.82,-122.615,-5.E-02)); +#497149 = CIRCLE('',#497150,0.135001418495); +#497150 = AXIS2_PLACEMENT_3D('',#497151,#497152,#497153); +#497151 = CARTESIAN_POINT('',(136.95500141848,-122.6150014184,-5.E-02)); +#497152 = DIRECTION('',(0.,0.,1.)); +#497153 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497154 = ORIENTED_EDGE('',*,*,#497155,.T.); +#497155 = EDGE_CURVE('',#497147,#497156,#497158,.T.); +#497156 = VERTEX_POINT('',#497157); +#497157 = CARTESIAN_POINT('',(136.82,-122.985,-5.E-02)); +#497158 = LINE('',#497159,#497160); +#497159 = CARTESIAN_POINT('',(136.82,-122.615,-5.E-02)); +#497160 = VECTOR('',#497161,1.); +#497161 = DIRECTION('',(0.,-1.,0.)); +#497162 = ORIENTED_EDGE('',*,*,#497163,.T.); +#497163 = EDGE_CURVE('',#497156,#497164,#497166,.T.); +#497164 = VERTEX_POINT('',#497165); +#497165 = CARTESIAN_POINT('',(136.955,-123.12,-5.E-02)); +#497166 = CIRCLE('',#497167,0.135001418495); +#497167 = AXIS2_PLACEMENT_3D('',#497168,#497169,#497170); +#497168 = CARTESIAN_POINT('',(136.95500141848,-122.9849985815,-5.E-02)); +#497169 = DIRECTION('',(0.,0.,1.)); +#497170 = DIRECTION('',(-0.999999999945,-1.050720672682E-05,0.)); +#497171 = ORIENTED_EDGE('',*,*,#497172,.T.); +#497172 = EDGE_CURVE('',#497164,#497173,#497175,.T.); +#497173 = VERTEX_POINT('',#497174); +#497174 = CARTESIAN_POINT('',(137.225,-123.12,-5.E-02)); +#497175 = LINE('',#497176,#497177); +#497176 = CARTESIAN_POINT('',(136.955,-123.12,-5.E-02)); +#497177 = VECTOR('',#497178,1.); +#497178 = DIRECTION('',(1.,0.,0.)); +#497179 = ORIENTED_EDGE('',*,*,#497180,.T.); +#497180 = EDGE_CURVE('',#497173,#497181,#497183,.T.); +#497181 = VERTEX_POINT('',#497182); +#497182 = CARTESIAN_POINT('',(137.36,-122.985,-5.E-02)); +#497183 = CIRCLE('',#497184,0.135001418495); +#497184 = AXIS2_PLACEMENT_3D('',#497185,#497186,#497187); +#497185 = CARTESIAN_POINT('',(137.22499858151,-122.9849985815,-5.E-02)); +#497186 = DIRECTION('',(0.,0.,1.)); +#497187 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497188 = ORIENTED_EDGE('',*,*,#497189,.T.); +#497189 = EDGE_CURVE('',#497181,#497128,#497190,.T.); +#497190 = LINE('',#497191,#497192); +#497191 = CARTESIAN_POINT('',(137.36,-122.985,-5.E-02)); +#497192 = VECTOR('',#497193,1.); +#497193 = DIRECTION('',(0.,1.,0.)); +#497194 = FACE_BOUND('',#497195,.T.); +#497195 = EDGE_LOOP('',(#497196,#497207,#497215,#497224,#497232,#497241, + #497249,#497258)); +#497196 = ORIENTED_EDGE('',*,*,#497197,.T.); +#497197 = EDGE_CURVE('',#497198,#497200,#497202,.T.); +#497198 = VERTEX_POINT('',#497199); +#497199 = CARTESIAN_POINT('',(138.38,-122.615,-5.E-02)); +#497200 = VERTEX_POINT('',#497201); +#497201 = CARTESIAN_POINT('',(138.245,-122.48,-5.E-02)); +#497202 = CIRCLE('',#497203,0.135001418495); +#497203 = AXIS2_PLACEMENT_3D('',#497204,#497205,#497206); +#497204 = CARTESIAN_POINT('',(138.24499858151,-122.6150014184,-5.E-02)); +#497205 = DIRECTION('',(0.,0.,1.)); +#497206 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#497207 = ORIENTED_EDGE('',*,*,#497208,.T.); +#497208 = EDGE_CURVE('',#497200,#497209,#497211,.T.); +#497209 = VERTEX_POINT('',#497210); +#497210 = CARTESIAN_POINT('',(137.975,-122.48,-5.E-02)); +#497211 = LINE('',#497212,#497213); +#497212 = CARTESIAN_POINT('',(138.245,-122.48,-5.E-02)); +#497213 = VECTOR('',#497214,1.); +#497214 = DIRECTION('',(-1.,0.,0.)); +#497215 = ORIENTED_EDGE('',*,*,#497216,.T.); +#497216 = EDGE_CURVE('',#497209,#497217,#497219,.T.); +#497217 = VERTEX_POINT('',#497218); +#497218 = CARTESIAN_POINT('',(137.84,-122.615,-5.E-02)); +#497219 = CIRCLE('',#497220,0.135001418495); +#497220 = AXIS2_PLACEMENT_3D('',#497221,#497222,#497223); +#497221 = CARTESIAN_POINT('',(137.97500141848,-122.6150014184,-5.E-02)); +#497222 = DIRECTION('',(0.,0.,1.)); +#497223 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#497224 = ORIENTED_EDGE('',*,*,#497225,.T.); +#497225 = EDGE_CURVE('',#497217,#497226,#497228,.T.); +#497226 = VERTEX_POINT('',#497227); +#497227 = CARTESIAN_POINT('',(137.84,-122.985,-5.E-02)); +#497228 = LINE('',#497229,#497230); +#497229 = CARTESIAN_POINT('',(137.84,-122.615,-5.E-02)); +#497230 = VECTOR('',#497231,1.); +#497231 = DIRECTION('',(0.,-1.,0.)); +#497232 = ORIENTED_EDGE('',*,*,#497233,.T.); +#497233 = EDGE_CURVE('',#497226,#497234,#497236,.T.); +#497234 = VERTEX_POINT('',#497235); +#497235 = CARTESIAN_POINT('',(137.975,-123.12,-5.E-02)); +#497236 = CIRCLE('',#497237,0.135001418495); +#497237 = AXIS2_PLACEMENT_3D('',#497238,#497239,#497240); +#497238 = CARTESIAN_POINT('',(137.97500141848,-122.9849985815,-5.E-02)); +#497239 = DIRECTION('',(0.,0.,1.)); +#497240 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#497241 = ORIENTED_EDGE('',*,*,#497242,.T.); +#497242 = EDGE_CURVE('',#497234,#497243,#497245,.T.); +#497243 = VERTEX_POINT('',#497244); +#497244 = CARTESIAN_POINT('',(138.245,-123.12,-5.E-02)); +#497245 = LINE('',#497246,#497247); +#497246 = CARTESIAN_POINT('',(137.975,-123.12,-5.E-02)); +#497247 = VECTOR('',#497248,1.); +#497248 = DIRECTION('',(1.,0.,0.)); +#497249 = ORIENTED_EDGE('',*,*,#497250,.T.); +#497250 = EDGE_CURVE('',#497243,#497251,#497253,.T.); +#497251 = VERTEX_POINT('',#497252); +#497252 = CARTESIAN_POINT('',(138.38,-122.985,-5.E-02)); +#497253 = CIRCLE('',#497254,0.135001418495); +#497254 = AXIS2_PLACEMENT_3D('',#497255,#497256,#497257); +#497255 = CARTESIAN_POINT('',(138.24499858151,-122.9849985815,-5.E-02)); +#497256 = DIRECTION('',(0.,0.,1.)); +#497257 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497258 = ORIENTED_EDGE('',*,*,#497259,.T.); +#497259 = EDGE_CURVE('',#497251,#497198,#497260,.T.); +#497260 = LINE('',#497261,#497262); +#497261 = CARTESIAN_POINT('',(138.38,-122.985,-5.E-02)); +#497262 = VECTOR('',#497263,1.); +#497263 = DIRECTION('',(0.,1.,0.)); +#497264 = FACE_BOUND('',#497265,.T.); +#497265 = EDGE_LOOP('',(#497266,#497277,#497285,#497294,#497302,#497311, + #497319,#497328)); +#497266 = ORIENTED_EDGE('',*,*,#497267,.T.); +#497267 = EDGE_CURVE('',#497268,#497270,#497272,.T.); +#497268 = VERTEX_POINT('',#497269); +#497269 = CARTESIAN_POINT('',(125.27,-122.315,-5.E-02)); +#497270 = VERTEX_POINT('',#497271); +#497271 = CARTESIAN_POINT('',(125.135,-122.18,-5.E-02)); +#497272 = CIRCLE('',#497273,0.135001418495); +#497273 = AXIS2_PLACEMENT_3D('',#497274,#497275,#497276); +#497274 = CARTESIAN_POINT('',(125.13499858151,-122.3150014184,-5.E-02)); +#497275 = DIRECTION('',(0.,0.,1.)); +#497276 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#497277 = ORIENTED_EDGE('',*,*,#497278,.T.); +#497278 = EDGE_CURVE('',#497270,#497279,#497281,.T.); +#497279 = VERTEX_POINT('',#497280); +#497280 = CARTESIAN_POINT('',(124.865,-122.18,-5.E-02)); +#497281 = LINE('',#497282,#497283); +#497282 = CARTESIAN_POINT('',(125.135,-122.18,-5.E-02)); +#497283 = VECTOR('',#497284,1.); +#497284 = DIRECTION('',(-1.,0.,0.)); +#497285 = ORIENTED_EDGE('',*,*,#497286,.T.); +#497286 = EDGE_CURVE('',#497279,#497287,#497289,.T.); +#497287 = VERTEX_POINT('',#497288); +#497288 = CARTESIAN_POINT('',(124.73,-122.315,-5.E-02)); +#497289 = CIRCLE('',#497290,0.135001418495); +#497290 = AXIS2_PLACEMENT_3D('',#497291,#497292,#497293); +#497291 = CARTESIAN_POINT('',(124.86500141848,-122.3150014184,-5.E-02)); +#497292 = DIRECTION('',(0.,0.,1.)); +#497293 = DIRECTION('',(-1.050720662156E-05,0.999999999945,0.)); +#497294 = ORIENTED_EDGE('',*,*,#497295,.T.); +#497295 = EDGE_CURVE('',#497287,#497296,#497298,.T.); +#497296 = VERTEX_POINT('',#497297); +#497297 = CARTESIAN_POINT('',(124.73,-122.685,-5.E-02)); +#497298 = LINE('',#497299,#497300); +#497299 = CARTESIAN_POINT('',(124.73,-122.315,-5.E-02)); +#497300 = VECTOR('',#497301,1.); +#497301 = DIRECTION('',(0.,-1.,0.)); +#497302 = ORIENTED_EDGE('',*,*,#497303,.T.); +#497303 = EDGE_CURVE('',#497296,#497304,#497306,.T.); +#497304 = VERTEX_POINT('',#497305); +#497305 = CARTESIAN_POINT('',(124.865,-122.82,-5.E-02)); +#497306 = CIRCLE('',#497307,0.135001418495); +#497307 = AXIS2_PLACEMENT_3D('',#497308,#497309,#497310); +#497308 = CARTESIAN_POINT('',(124.86500141848,-122.6849985815,-5.E-02)); +#497309 = DIRECTION('',(0.,0.,1.)); +#497310 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#497311 = ORIENTED_EDGE('',*,*,#497312,.T.); +#497312 = EDGE_CURVE('',#497304,#497313,#497315,.T.); +#497313 = VERTEX_POINT('',#497314); +#497314 = CARTESIAN_POINT('',(125.135,-122.82,-5.E-02)); +#497315 = LINE('',#497316,#497317); +#497316 = CARTESIAN_POINT('',(124.865,-122.82,-5.E-02)); +#497317 = VECTOR('',#497318,1.); +#497318 = DIRECTION('',(1.,0.,0.)); +#497319 = ORIENTED_EDGE('',*,*,#497320,.T.); +#497320 = EDGE_CURVE('',#497313,#497321,#497323,.T.); +#497321 = VERTEX_POINT('',#497322); +#497322 = CARTESIAN_POINT('',(125.27,-122.685,-5.E-02)); +#497323 = CIRCLE('',#497324,0.135001418495); +#497324 = AXIS2_PLACEMENT_3D('',#497325,#497326,#497327); +#497325 = CARTESIAN_POINT('',(125.13499858151,-122.6849985815,-5.E-02)); +#497326 = DIRECTION('',(0.,0.,1.)); +#497327 = DIRECTION('',(1.050720662156E-05,-0.999999999945,0.)); +#497328 = ORIENTED_EDGE('',*,*,#497329,.T.); +#497329 = EDGE_CURVE('',#497321,#497268,#497330,.T.); +#497330 = LINE('',#497331,#497332); +#497331 = CARTESIAN_POINT('',(125.27,-122.685,-5.E-02)); +#497332 = VECTOR('',#497333,1.); +#497333 = DIRECTION('',(0.,1.,0.)); +#497334 = FACE_BOUND('',#497335,.T.); +#497335 = EDGE_LOOP('',(#497336,#497347,#497355,#497364,#497372,#497381, + #497389,#497398)); +#497336 = ORIENTED_EDGE('',*,*,#497337,.T.); +#497337 = EDGE_CURVE('',#497338,#497340,#497342,.T.); +#497338 = VERTEX_POINT('',#497339); +#497339 = CARTESIAN_POINT('',(126.29,-122.315,-5.E-02)); +#497340 = VERTEX_POINT('',#497341); +#497341 = CARTESIAN_POINT('',(126.155,-122.18,-5.E-02)); +#497342 = CIRCLE('',#497343,0.135001418495); +#497343 = AXIS2_PLACEMENT_3D('',#497344,#497345,#497346); +#497344 = CARTESIAN_POINT('',(126.15499858151,-122.3150014184,-5.E-02)); +#497345 = DIRECTION('',(0.,0.,1.)); +#497346 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#497347 = ORIENTED_EDGE('',*,*,#497348,.T.); +#497348 = EDGE_CURVE('',#497340,#497349,#497351,.T.); +#497349 = VERTEX_POINT('',#497350); +#497350 = CARTESIAN_POINT('',(125.885,-122.18,-5.E-02)); +#497351 = LINE('',#497352,#497353); +#497352 = CARTESIAN_POINT('',(126.155,-122.18,-5.E-02)); +#497353 = VECTOR('',#497354,1.); +#497354 = DIRECTION('',(-1.,0.,0.)); +#497355 = ORIENTED_EDGE('',*,*,#497356,.T.); +#497356 = EDGE_CURVE('',#497349,#497357,#497359,.T.); +#497357 = VERTEX_POINT('',#497358); +#497358 = CARTESIAN_POINT('',(125.75,-122.315,-5.E-02)); +#497359 = CIRCLE('',#497360,0.135001418495); +#497360 = AXIS2_PLACEMENT_3D('',#497361,#497362,#497363); +#497361 = CARTESIAN_POINT('',(125.88500141848,-122.3150014184,-5.E-02)); +#497362 = DIRECTION('',(0.,0.,1.)); +#497363 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497364 = ORIENTED_EDGE('',*,*,#497365,.T.); +#497365 = EDGE_CURVE('',#497357,#497366,#497368,.T.); +#497366 = VERTEX_POINT('',#497367); +#497367 = CARTESIAN_POINT('',(125.75,-122.685,-5.E-02)); +#497368 = LINE('',#497369,#497370); +#497369 = CARTESIAN_POINT('',(125.75,-122.315,-5.E-02)); +#497370 = VECTOR('',#497371,1.); +#497371 = DIRECTION('',(0.,-1.,0.)); +#497372 = ORIENTED_EDGE('',*,*,#497373,.T.); +#497373 = EDGE_CURVE('',#497366,#497374,#497376,.T.); +#497374 = VERTEX_POINT('',#497375); +#497375 = CARTESIAN_POINT('',(125.885,-122.82,-5.E-02)); +#497376 = CIRCLE('',#497377,0.135001418495); +#497377 = AXIS2_PLACEMENT_3D('',#497378,#497379,#497380); +#497378 = CARTESIAN_POINT('',(125.88500141848,-122.6849985815,-5.E-02)); +#497379 = DIRECTION('',(0.,0.,1.)); +#497380 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#497381 = ORIENTED_EDGE('',*,*,#497382,.T.); +#497382 = EDGE_CURVE('',#497374,#497383,#497385,.T.); +#497383 = VERTEX_POINT('',#497384); +#497384 = CARTESIAN_POINT('',(126.155,-122.82,-5.E-02)); +#497385 = LINE('',#497386,#497387); +#497386 = CARTESIAN_POINT('',(125.885,-122.82,-5.E-02)); +#497387 = VECTOR('',#497388,1.); +#497388 = DIRECTION('',(1.,0.,0.)); +#497389 = ORIENTED_EDGE('',*,*,#497390,.T.); +#497390 = EDGE_CURVE('',#497383,#497391,#497393,.T.); +#497391 = VERTEX_POINT('',#497392); +#497392 = CARTESIAN_POINT('',(126.29,-122.685,-5.E-02)); +#497393 = CIRCLE('',#497394,0.135001418495); +#497394 = AXIS2_PLACEMENT_3D('',#497395,#497396,#497397); +#497395 = CARTESIAN_POINT('',(126.15499858151,-122.6849985815,-5.E-02)); +#497396 = DIRECTION('',(0.,0.,1.)); +#497397 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497398 = ORIENTED_EDGE('',*,*,#497399,.T.); +#497399 = EDGE_CURVE('',#497391,#497338,#497400,.T.); +#497400 = LINE('',#497401,#497402); +#497401 = CARTESIAN_POINT('',(126.29,-122.685,-5.E-02)); +#497402 = VECTOR('',#497403,1.); +#497403 = DIRECTION('',(0.,1.,0.)); +#497404 = FACE_BOUND('',#497405,.T.); +#497405 = EDGE_LOOP('',(#497406,#497417,#497425,#497434,#497442,#497451, + #497459,#497468)); +#497406 = ORIENTED_EDGE('',*,*,#497407,.T.); +#497407 = EDGE_CURVE('',#497408,#497410,#497412,.T.); +#497408 = VERTEX_POINT('',#497409); +#497409 = CARTESIAN_POINT('',(146.32,-122.355,-5.E-02)); +#497410 = VERTEX_POINT('',#497411); +#497411 = CARTESIAN_POINT('',(146.185,-122.22,-5.E-02)); +#497412 = CIRCLE('',#497413,0.135001418495); +#497413 = AXIS2_PLACEMENT_3D('',#497414,#497415,#497416); +#497414 = CARTESIAN_POINT('',(146.18499858151,-122.3550014184,-5.E-02)); +#497415 = DIRECTION('',(0.,0.,1.)); +#497416 = DIRECTION('',(0.999999999945,1.050720630576E-05,-0.)); +#497417 = ORIENTED_EDGE('',*,*,#497418,.T.); +#497418 = EDGE_CURVE('',#497410,#497419,#497421,.T.); +#497419 = VERTEX_POINT('',#497420); +#497420 = CARTESIAN_POINT('',(145.815,-122.22,-5.E-02)); +#497421 = LINE('',#497422,#497423); +#497422 = CARTESIAN_POINT('',(146.185,-122.22,-5.E-02)); +#497423 = VECTOR('',#497424,1.); +#497424 = DIRECTION('',(-1.,0.,0.)); +#497425 = ORIENTED_EDGE('',*,*,#497426,.T.); +#497426 = EDGE_CURVE('',#497419,#497427,#497429,.T.); +#497427 = VERTEX_POINT('',#497428); +#497428 = CARTESIAN_POINT('',(145.68,-122.355,-5.E-02)); +#497429 = CIRCLE('',#497430,0.135001418495); +#497430 = AXIS2_PLACEMENT_3D('',#497431,#497432,#497433); +#497431 = CARTESIAN_POINT('',(145.81500141848,-122.3550014184,-5.E-02)); +#497432 = DIRECTION('',(0.,0.,1.)); +#497433 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497434 = ORIENTED_EDGE('',*,*,#497435,.T.); +#497435 = EDGE_CURVE('',#497427,#497436,#497438,.T.); +#497436 = VERTEX_POINT('',#497437); +#497437 = CARTESIAN_POINT('',(145.68,-122.625,-5.E-02)); +#497438 = LINE('',#497439,#497440); +#497439 = CARTESIAN_POINT('',(145.68,-122.355,-5.E-02)); +#497440 = VECTOR('',#497441,1.); +#497441 = DIRECTION('',(0.,-1.,0.)); +#497442 = ORIENTED_EDGE('',*,*,#497443,.T.); +#497443 = EDGE_CURVE('',#497436,#497444,#497446,.T.); +#497444 = VERTEX_POINT('',#497445); +#497445 = CARTESIAN_POINT('',(145.815,-122.76,-5.E-02)); +#497446 = CIRCLE('',#497447,0.135001418495); +#497447 = AXIS2_PLACEMENT_3D('',#497448,#497449,#497450); +#497448 = CARTESIAN_POINT('',(145.81500141848,-122.6249985815,-5.E-02)); +#497449 = DIRECTION('',(0.,0.,1.)); +#497450 = DIRECTION('',(-0.999999999945,-1.050720630576E-05,0.)); +#497451 = ORIENTED_EDGE('',*,*,#497452,.T.); +#497452 = EDGE_CURVE('',#497444,#497453,#497455,.T.); +#497453 = VERTEX_POINT('',#497454); +#497454 = CARTESIAN_POINT('',(146.185,-122.76,-5.E-02)); +#497455 = LINE('',#497456,#497457); +#497456 = CARTESIAN_POINT('',(145.815,-122.76,-5.E-02)); +#497457 = VECTOR('',#497458,1.); +#497458 = DIRECTION('',(1.,0.,0.)); +#497459 = ORIENTED_EDGE('',*,*,#497460,.T.); +#497460 = EDGE_CURVE('',#497453,#497461,#497463,.T.); +#497461 = VERTEX_POINT('',#497462); +#497462 = CARTESIAN_POINT('',(146.32,-122.625,-5.E-02)); +#497463 = CIRCLE('',#497464,0.135001418495); +#497464 = AXIS2_PLACEMENT_3D('',#497465,#497466,#497467); +#497465 = CARTESIAN_POINT('',(146.18499858151,-122.6249985815,-5.E-02)); +#497466 = DIRECTION('',(0.,0.,1.)); +#497467 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#497468 = ORIENTED_EDGE('',*,*,#497469,.T.); +#497469 = EDGE_CURVE('',#497461,#497408,#497470,.T.); +#497470 = LINE('',#497471,#497472); +#497471 = CARTESIAN_POINT('',(146.32,-122.625,-5.E-02)); +#497472 = VECTOR('',#497473,1.); +#497473 = DIRECTION('',(0.,1.,0.)); +#497474 = FACE_BOUND('',#497475,.T.); +#497475 = EDGE_LOOP('',(#497476,#497487,#497495,#497504,#497512,#497521, + #497529,#497538)); +#497476 = ORIENTED_EDGE('',*,*,#497477,.T.); +#497477 = EDGE_CURVE('',#497478,#497480,#497482,.T.); +#497478 = VERTEX_POINT('',#497479); +#497479 = CARTESIAN_POINT('',(149.2375,-121.75,-5.E-02)); +#497480 = VERTEX_POINT('',#497481); +#497481 = CARTESIAN_POINT('',(149.0875,-121.6,-5.E-02)); +#497482 = CIRCLE('',#497483,0.150000058649); +#497483 = AXIS2_PLACEMENT_3D('',#497484,#497485,#497486); +#497484 = CARTESIAN_POINT('',(149.08749994135,-121.7500000586,-5.E-02)); +#497485 = DIRECTION('',(0.,0.,1.)); +#497486 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#497487 = ORIENTED_EDGE('',*,*,#497488,.T.); +#497488 = EDGE_CURVE('',#497480,#497489,#497491,.T.); +#497489 = VERTEX_POINT('',#497490); +#497490 = CARTESIAN_POINT('',(147.9125,-121.6,-5.E-02)); +#497491 = LINE('',#497492,#497493); +#497492 = CARTESIAN_POINT('',(149.0875,-121.6,-5.E-02)); +#497493 = VECTOR('',#497494,1.); +#497494 = DIRECTION('',(-1.,0.,0.)); +#497495 = ORIENTED_EDGE('',*,*,#497496,.T.); +#497496 = EDGE_CURVE('',#497489,#497497,#497499,.T.); +#497497 = VERTEX_POINT('',#497498); +#497498 = CARTESIAN_POINT('',(147.7625,-121.75,-5.E-02)); +#497499 = CIRCLE('',#497500,0.150000058649); +#497500 = AXIS2_PLACEMENT_3D('',#497501,#497502,#497503); +#497501 = CARTESIAN_POINT('',(147.91250005864,-121.7500000586,-5.E-02)); +#497502 = DIRECTION('',(0.,0.,1.)); +#497503 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#497504 = ORIENTED_EDGE('',*,*,#497505,.T.); +#497505 = EDGE_CURVE('',#497497,#497506,#497508,.T.); +#497506 = VERTEX_POINT('',#497507); +#497507 = CARTESIAN_POINT('',(147.7625,-122.05,-5.E-02)); +#497508 = LINE('',#497509,#497510); +#497509 = CARTESIAN_POINT('',(147.7625,-121.75,-5.E-02)); +#497510 = VECTOR('',#497511,1.); +#497511 = DIRECTION('',(0.,-1.,0.)); +#497512 = ORIENTED_EDGE('',*,*,#497513,.T.); +#497513 = EDGE_CURVE('',#497506,#497514,#497516,.T.); +#497514 = VERTEX_POINT('',#497515); +#497515 = CARTESIAN_POINT('',(147.9125,-122.2,-5.E-02)); +#497516 = CIRCLE('',#497517,0.150000058649); +#497517 = AXIS2_PLACEMENT_3D('',#497518,#497519,#497520); +#497518 = CARTESIAN_POINT('',(147.91250005864,-122.0499999413,-5.E-02)); +#497519 = DIRECTION('',(0.,0.,1.)); +#497520 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#497521 = ORIENTED_EDGE('',*,*,#497522,.T.); +#497522 = EDGE_CURVE('',#497514,#497523,#497525,.T.); +#497523 = VERTEX_POINT('',#497524); +#497524 = CARTESIAN_POINT('',(149.0875,-122.2,-5.E-02)); +#497525 = LINE('',#497526,#497527); +#497526 = CARTESIAN_POINT('',(147.9125,-122.2,-5.E-02)); +#497527 = VECTOR('',#497528,1.); +#497528 = DIRECTION('',(1.,0.,0.)); +#497529 = ORIENTED_EDGE('',*,*,#497530,.T.); +#497530 = EDGE_CURVE('',#497523,#497531,#497533,.T.); +#497531 = VERTEX_POINT('',#497532); +#497532 = CARTESIAN_POINT('',(149.2375,-122.05,-5.E-02)); +#497533 = CIRCLE('',#497534,0.150000058649); +#497534 = AXIS2_PLACEMENT_3D('',#497535,#497536,#497537); +#497535 = CARTESIAN_POINT('',(149.08749994135,-122.0499999413,-5.E-02)); +#497536 = DIRECTION('',(0.,0.,1.)); +#497537 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#497538 = ORIENTED_EDGE('',*,*,#497539,.T.); +#497539 = EDGE_CURVE('',#497531,#497478,#497540,.T.); +#497540 = LINE('',#497541,#497542); +#497541 = CARTESIAN_POINT('',(149.2375,-122.05,-5.E-02)); +#497542 = VECTOR('',#497543,1.); +#497543 = DIRECTION('',(0.,1.,0.)); +#497544 = FACE_BOUND('',#497545,.T.); +#497545 = EDGE_LOOP('',(#497546,#497557,#497565,#497574,#497582,#497591, + #497599,#497608)); +#497546 = ORIENTED_EDGE('',*,*,#497547,.T.); +#497547 = EDGE_CURVE('',#497548,#497550,#497552,.T.); +#497548 = VERTEX_POINT('',#497549); +#497549 = CARTESIAN_POINT('',(144.6,-121.425,-5.E-02)); +#497550 = VERTEX_POINT('',#497551); +#497551 = CARTESIAN_POINT('',(144.375,-121.2,-5.E-02)); +#497552 = CIRCLE('',#497553,0.225000087974); +#497553 = AXIS2_PLACEMENT_3D('',#497554,#497555,#497556); +#497554 = CARTESIAN_POINT('',(144.37499991202,-121.4250000879,-5.E-02)); +#497555 = DIRECTION('',(0.,0.,1.)); +#497556 = DIRECTION('',(1.,3.909953458166E-07,-0.)); +#497557 = ORIENTED_EDGE('',*,*,#497558,.T.); +#497558 = EDGE_CURVE('',#497550,#497559,#497561,.T.); +#497559 = VERTEX_POINT('',#497560); +#497560 = CARTESIAN_POINT('',(143.625,-121.2,-5.E-02)); +#497561 = LINE('',#497562,#497563); +#497562 = CARTESIAN_POINT('',(144.375,-121.2,-5.E-02)); +#497563 = VECTOR('',#497564,1.); +#497564 = DIRECTION('',(-1.,0.,0.)); +#497565 = ORIENTED_EDGE('',*,*,#497566,.T.); +#497566 = EDGE_CURVE('',#497559,#497567,#497569,.T.); +#497567 = VERTEX_POINT('',#497568); +#497568 = CARTESIAN_POINT('',(143.4,-121.425,-5.E-02)); +#497569 = CIRCLE('',#497570,0.225000087974); +#497570 = AXIS2_PLACEMENT_3D('',#497571,#497572,#497573); +#497571 = CARTESIAN_POINT('',(143.62500008797,-121.4250000879,-5.E-02)); +#497572 = DIRECTION('',(0.,0.,1.)); +#497573 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#497574 = ORIENTED_EDGE('',*,*,#497575,.T.); +#497575 = EDGE_CURVE('',#497567,#497576,#497578,.T.); +#497576 = VERTEX_POINT('',#497577); +#497577 = CARTESIAN_POINT('',(143.4,-121.875,-5.E-02)); +#497578 = LINE('',#497579,#497580); +#497579 = CARTESIAN_POINT('',(143.4,-121.425,-5.E-02)); +#497580 = VECTOR('',#497581,1.); +#497581 = DIRECTION('',(0.,-1.,0.)); +#497582 = ORIENTED_EDGE('',*,*,#497583,.T.); +#497583 = EDGE_CURVE('',#497576,#497584,#497586,.T.); +#497584 = VERTEX_POINT('',#497585); +#497585 = CARTESIAN_POINT('',(143.625,-122.1,-5.E-02)); +#497586 = CIRCLE('',#497587,0.225000087974); +#497587 = AXIS2_PLACEMENT_3D('',#497588,#497589,#497590); +#497588 = CARTESIAN_POINT('',(143.62500008797,-121.874999912,-5.E-02)); +#497589 = DIRECTION('',(0.,0.,1.)); +#497590 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#497591 = ORIENTED_EDGE('',*,*,#497592,.T.); +#497592 = EDGE_CURVE('',#497584,#497593,#497595,.T.); +#497593 = VERTEX_POINT('',#497594); +#497594 = CARTESIAN_POINT('',(144.375,-122.1,-5.E-02)); +#497595 = LINE('',#497596,#497597); +#497596 = CARTESIAN_POINT('',(143.625,-122.1,-5.E-02)); +#497597 = VECTOR('',#497598,1.); +#497598 = DIRECTION('',(1.,0.,0.)); +#497599 = ORIENTED_EDGE('',*,*,#497600,.T.); +#497600 = EDGE_CURVE('',#497593,#497601,#497603,.T.); +#497601 = VERTEX_POINT('',#497602); +#497602 = CARTESIAN_POINT('',(144.6,-121.875,-5.E-02)); +#497603 = CIRCLE('',#497604,0.225000087974); +#497604 = AXIS2_PLACEMENT_3D('',#497605,#497606,#497607); +#497605 = CARTESIAN_POINT('',(144.37499991202,-121.874999912,-5.E-02)); +#497606 = DIRECTION('',(0.,0.,1.)); +#497607 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#497608 = ORIENTED_EDGE('',*,*,#497609,.T.); +#497609 = EDGE_CURVE('',#497601,#497548,#497610,.T.); +#497610 = LINE('',#497611,#497612); +#497611 = CARTESIAN_POINT('',(144.6,-121.875,-5.E-02)); +#497612 = VECTOR('',#497613,1.); +#497613 = DIRECTION('',(0.,1.,0.)); +#497614 = FACE_BOUND('',#497615,.T.); +#497615 = EDGE_LOOP('',(#497616,#497627,#497635,#497644,#497652,#497661, + #497669,#497678)); +#497616 = ORIENTED_EDGE('',*,*,#497617,.T.); +#497617 = EDGE_CURVE('',#497618,#497620,#497622,.T.); +#497618 = VERTEX_POINT('',#497619); +#497619 = CARTESIAN_POINT('',(125.29,-120.815,-5.E-02)); +#497620 = VERTEX_POINT('',#497621); +#497621 = CARTESIAN_POINT('',(125.155,-120.68,-5.E-02)); +#497622 = CIRCLE('',#497623,0.135001418495); +#497623 = AXIS2_PLACEMENT_3D('',#497624,#497625,#497626); +#497624 = CARTESIAN_POINT('',(125.15499858151,-120.8150014184,-5.E-02)); +#497625 = DIRECTION('',(0.,0.,1.)); +#497626 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#497627 = ORIENTED_EDGE('',*,*,#497628,.T.); +#497628 = EDGE_CURVE('',#497620,#497629,#497631,.T.); +#497629 = VERTEX_POINT('',#497630); +#497630 = CARTESIAN_POINT('',(124.885,-120.68,-5.E-02)); +#497631 = LINE('',#497632,#497633); +#497632 = CARTESIAN_POINT('',(125.155,-120.68,-5.E-02)); +#497633 = VECTOR('',#497634,1.); +#497634 = DIRECTION('',(-1.,0.,0.)); +#497635 = ORIENTED_EDGE('',*,*,#497636,.T.); +#497636 = EDGE_CURVE('',#497629,#497637,#497639,.T.); +#497637 = VERTEX_POINT('',#497638); +#497638 = CARTESIAN_POINT('',(124.75,-120.815,-5.E-02)); +#497639 = CIRCLE('',#497640,0.135001418495); +#497640 = AXIS2_PLACEMENT_3D('',#497641,#497642,#497643); +#497641 = CARTESIAN_POINT('',(124.88500141848,-120.8150014184,-5.E-02)); +#497642 = DIRECTION('',(0.,0.,1.)); +#497643 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497644 = ORIENTED_EDGE('',*,*,#497645,.T.); +#497645 = EDGE_CURVE('',#497637,#497646,#497648,.T.); +#497646 = VERTEX_POINT('',#497647); +#497647 = CARTESIAN_POINT('',(124.75,-121.185,-5.E-02)); +#497648 = LINE('',#497649,#497650); +#497649 = CARTESIAN_POINT('',(124.75,-120.815,-5.E-02)); +#497650 = VECTOR('',#497651,1.); +#497651 = DIRECTION('',(0.,-1.,0.)); +#497652 = ORIENTED_EDGE('',*,*,#497653,.T.); +#497653 = EDGE_CURVE('',#497646,#497654,#497656,.T.); +#497654 = VERTEX_POINT('',#497655); +#497655 = CARTESIAN_POINT('',(124.885,-121.32,-5.E-02)); +#497656 = CIRCLE('',#497657,0.135001418495); +#497657 = AXIS2_PLACEMENT_3D('',#497658,#497659,#497660); +#497658 = CARTESIAN_POINT('',(124.88500141848,-121.1849985815,-5.E-02)); +#497659 = DIRECTION('',(0.,0.,1.)); +#497660 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#497661 = ORIENTED_EDGE('',*,*,#497662,.T.); +#497662 = EDGE_CURVE('',#497654,#497663,#497665,.T.); +#497663 = VERTEX_POINT('',#497664); +#497664 = CARTESIAN_POINT('',(125.155,-121.32,-5.E-02)); +#497665 = LINE('',#497666,#497667); +#497666 = CARTESIAN_POINT('',(124.885,-121.32,-5.E-02)); +#497667 = VECTOR('',#497668,1.); +#497668 = DIRECTION('',(1.,0.,0.)); +#497669 = ORIENTED_EDGE('',*,*,#497670,.T.); +#497670 = EDGE_CURVE('',#497663,#497671,#497673,.T.); +#497671 = VERTEX_POINT('',#497672); +#497672 = CARTESIAN_POINT('',(125.29,-121.185,-5.E-02)); +#497673 = CIRCLE('',#497674,0.135001418495); +#497674 = AXIS2_PLACEMENT_3D('',#497675,#497676,#497677); +#497675 = CARTESIAN_POINT('',(125.15499858151,-121.1849985815,-5.E-02)); +#497676 = DIRECTION('',(0.,0.,1.)); +#497677 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497678 = ORIENTED_EDGE('',*,*,#497679,.T.); +#497679 = EDGE_CURVE('',#497671,#497618,#497680,.T.); +#497680 = LINE('',#497681,#497682); +#497681 = CARTESIAN_POINT('',(125.29,-121.185,-5.E-02)); +#497682 = VECTOR('',#497683,1.); +#497683 = DIRECTION('',(0.,1.,0.)); +#497684 = FACE_BOUND('',#497685,.T.); +#497685 = EDGE_LOOP('',(#497686,#497697,#497705,#497714,#497722,#497731, + #497739,#497748)); +#497686 = ORIENTED_EDGE('',*,*,#497687,.T.); +#497687 = EDGE_CURVE('',#497688,#497690,#497692,.T.); +#497688 = VERTEX_POINT('',#497689); +#497689 = CARTESIAN_POINT('',(126.31,-120.815,-5.E-02)); +#497690 = VERTEX_POINT('',#497691); +#497691 = CARTESIAN_POINT('',(126.175,-120.68,-5.E-02)); +#497692 = CIRCLE('',#497693,0.135001418495); +#497693 = AXIS2_PLACEMENT_3D('',#497694,#497695,#497696); +#497694 = CARTESIAN_POINT('',(126.17499858151,-120.8150014184,-5.E-02)); +#497695 = DIRECTION('',(0.,0.,1.)); +#497696 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#497697 = ORIENTED_EDGE('',*,*,#497698,.T.); +#497698 = EDGE_CURVE('',#497690,#497699,#497701,.T.); +#497699 = VERTEX_POINT('',#497700); +#497700 = CARTESIAN_POINT('',(125.905,-120.68,-5.E-02)); +#497701 = LINE('',#497702,#497703); +#497702 = CARTESIAN_POINT('',(126.175,-120.68,-5.E-02)); +#497703 = VECTOR('',#497704,1.); +#497704 = DIRECTION('',(-1.,0.,0.)); +#497705 = ORIENTED_EDGE('',*,*,#497706,.T.); +#497706 = EDGE_CURVE('',#497699,#497707,#497709,.T.); +#497707 = VERTEX_POINT('',#497708); +#497708 = CARTESIAN_POINT('',(125.77,-120.815,-5.E-02)); +#497709 = CIRCLE('',#497710,0.135001418495); +#497710 = AXIS2_PLACEMENT_3D('',#497711,#497712,#497713); +#497711 = CARTESIAN_POINT('',(125.90500141848,-120.8150014184,-5.E-02)); +#497712 = DIRECTION('',(0.,0.,1.)); +#497713 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#497714 = ORIENTED_EDGE('',*,*,#497715,.T.); +#497715 = EDGE_CURVE('',#497707,#497716,#497718,.T.); +#497716 = VERTEX_POINT('',#497717); +#497717 = CARTESIAN_POINT('',(125.77,-121.185,-5.E-02)); +#497718 = LINE('',#497719,#497720); +#497719 = CARTESIAN_POINT('',(125.77,-120.815,-5.E-02)); +#497720 = VECTOR('',#497721,1.); +#497721 = DIRECTION('',(0.,-1.,0.)); +#497722 = ORIENTED_EDGE('',*,*,#497723,.T.); +#497723 = EDGE_CURVE('',#497716,#497724,#497726,.T.); +#497724 = VERTEX_POINT('',#497725); +#497725 = CARTESIAN_POINT('',(125.905,-121.32,-5.E-02)); +#497726 = CIRCLE('',#497727,0.135001418495); +#497727 = AXIS2_PLACEMENT_3D('',#497728,#497729,#497730); +#497728 = CARTESIAN_POINT('',(125.90500141848,-121.1849985815,-5.E-02)); +#497729 = DIRECTION('',(0.,0.,1.)); +#497730 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#497731 = ORIENTED_EDGE('',*,*,#497732,.T.); +#497732 = EDGE_CURVE('',#497724,#497733,#497735,.T.); +#497733 = VERTEX_POINT('',#497734); +#497734 = CARTESIAN_POINT('',(126.175,-121.32,-5.E-02)); +#497735 = LINE('',#497736,#497737); +#497736 = CARTESIAN_POINT('',(125.905,-121.32,-5.E-02)); +#497737 = VECTOR('',#497738,1.); +#497738 = DIRECTION('',(1.,0.,0.)); +#497739 = ORIENTED_EDGE('',*,*,#497740,.T.); +#497740 = EDGE_CURVE('',#497733,#497741,#497743,.T.); +#497741 = VERTEX_POINT('',#497742); +#497742 = CARTESIAN_POINT('',(126.31,-121.185,-5.E-02)); +#497743 = CIRCLE('',#497744,0.135001418495); +#497744 = AXIS2_PLACEMENT_3D('',#497745,#497746,#497747); +#497745 = CARTESIAN_POINT('',(126.17499858151,-121.1849985815,-5.E-02)); +#497746 = DIRECTION('',(0.,0.,1.)); +#497747 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#497748 = ORIENTED_EDGE('',*,*,#497749,.T.); +#497749 = EDGE_CURVE('',#497741,#497688,#497750,.T.); +#497750 = LINE('',#497751,#497752); +#497751 = CARTESIAN_POINT('',(126.31,-121.185,-5.E-02)); +#497752 = VECTOR('',#497753,1.); +#497753 = DIRECTION('',(0.,1.,0.)); +#497754 = FACE_BOUND('',#497755,.T.); +#497755 = EDGE_LOOP('',(#497756,#497767,#497775,#497784,#497792,#497801, + #497809,#497818)); +#497756 = ORIENTED_EDGE('',*,*,#497757,.T.); +#497757 = EDGE_CURVE('',#497758,#497760,#497762,.T.); +#497758 = VERTEX_POINT('',#497759); +#497759 = CARTESIAN_POINT('',(151.1125,-120.8,-5.E-02)); +#497760 = VERTEX_POINT('',#497761); +#497761 = CARTESIAN_POINT('',(150.9625,-120.65,-5.E-02)); +#497762 = CIRCLE('',#497763,0.150000058649); +#497763 = AXIS2_PLACEMENT_3D('',#497764,#497765,#497766); +#497764 = CARTESIAN_POINT('',(150.96249994135,-120.8000000586,-5.E-02)); +#497765 = DIRECTION('',(0.,0.,1.)); +#497766 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#497767 = ORIENTED_EDGE('',*,*,#497768,.T.); +#497768 = EDGE_CURVE('',#497760,#497769,#497771,.T.); +#497769 = VERTEX_POINT('',#497770); +#497770 = CARTESIAN_POINT('',(149.7875,-120.65,-5.E-02)); +#497771 = LINE('',#497772,#497773); +#497772 = CARTESIAN_POINT('',(150.9625,-120.65,-5.E-02)); +#497773 = VECTOR('',#497774,1.); +#497774 = DIRECTION('',(-1.,0.,0.)); +#497775 = ORIENTED_EDGE('',*,*,#497776,.T.); +#497776 = EDGE_CURVE('',#497769,#497777,#497779,.T.); +#497777 = VERTEX_POINT('',#497778); +#497778 = CARTESIAN_POINT('',(149.6375,-120.8,-5.E-02)); +#497779 = CIRCLE('',#497780,0.150000058649); +#497780 = AXIS2_PLACEMENT_3D('',#497781,#497782,#497783); +#497781 = CARTESIAN_POINT('',(149.78750005864,-120.8000000586,-5.E-02)); +#497782 = DIRECTION('',(0.,0.,1.)); +#497783 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#497784 = ORIENTED_EDGE('',*,*,#497785,.T.); +#497785 = EDGE_CURVE('',#497777,#497786,#497788,.T.); +#497786 = VERTEX_POINT('',#497787); +#497787 = CARTESIAN_POINT('',(149.6375,-121.1,-5.E-02)); +#497788 = LINE('',#497789,#497790); +#497789 = CARTESIAN_POINT('',(149.6375,-120.8,-5.E-02)); +#497790 = VECTOR('',#497791,1.); +#497791 = DIRECTION('',(0.,-1.,0.)); +#497792 = ORIENTED_EDGE('',*,*,#497793,.T.); +#497793 = EDGE_CURVE('',#497786,#497794,#497796,.T.); +#497794 = VERTEX_POINT('',#497795); +#497795 = CARTESIAN_POINT('',(149.7875,-121.25,-5.E-02)); +#497796 = CIRCLE('',#497797,0.150000058649); +#497797 = AXIS2_PLACEMENT_3D('',#497798,#497799,#497800); +#497798 = CARTESIAN_POINT('',(149.78750005864,-121.0999999413,-5.E-02)); +#497799 = DIRECTION('',(0.,0.,1.)); +#497800 = DIRECTION('',(-1.,-3.909953142369E-07,0.)); +#497801 = ORIENTED_EDGE('',*,*,#497802,.T.); +#497802 = EDGE_CURVE('',#497794,#497803,#497805,.T.); +#497803 = VERTEX_POINT('',#497804); +#497804 = CARTESIAN_POINT('',(150.9625,-121.25,-5.E-02)); +#497805 = LINE('',#497806,#497807); +#497806 = CARTESIAN_POINT('',(149.7875,-121.25,-5.E-02)); +#497807 = VECTOR('',#497808,1.); +#497808 = DIRECTION('',(1.,0.,0.)); +#497809 = ORIENTED_EDGE('',*,*,#497810,.T.); +#497810 = EDGE_CURVE('',#497803,#497811,#497813,.T.); +#497811 = VERTEX_POINT('',#497812); +#497812 = CARTESIAN_POINT('',(151.1125,-121.1,-5.E-02)); +#497813 = CIRCLE('',#497814,0.150000058649); +#497814 = AXIS2_PLACEMENT_3D('',#497815,#497816,#497817); +#497815 = CARTESIAN_POINT('',(150.96249994135,-121.0999999413,-5.E-02)); +#497816 = DIRECTION('',(0.,0.,1.)); +#497817 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#497818 = ORIENTED_EDGE('',*,*,#497819,.T.); +#497819 = EDGE_CURVE('',#497811,#497758,#497820,.T.); +#497820 = LINE('',#497821,#497822); +#497821 = CARTESIAN_POINT('',(151.1125,-121.1,-5.E-02)); +#497822 = VECTOR('',#497823,1.); +#497823 = DIRECTION('',(0.,1.,0.)); +#497824 = FACE_BOUND('',#497825,.T.); +#497825 = EDGE_LOOP('',(#497826,#497837,#497845,#497854,#497862,#497871, + #497879,#497888)); +#497826 = ORIENTED_EDGE('',*,*,#497827,.T.); +#497827 = EDGE_CURVE('',#497828,#497830,#497832,.T.); +#497828 = VERTEX_POINT('',#497829); +#497829 = CARTESIAN_POINT('',(137.,-120.025,-5.E-02)); +#497830 = VERTEX_POINT('',#497831); +#497831 = CARTESIAN_POINT('',(136.75,-119.775,-5.E-02)); +#497832 = CIRCLE('',#497833,0.249998959685); +#497833 = AXIS2_PLACEMENT_3D('',#497834,#497835,#497836); +#497834 = CARTESIAN_POINT('',(136.75000104031,-120.0249989596,-5.E-02)); +#497835 = DIRECTION('',(0.,0.,1.)); +#497836 = DIRECTION('',(0.999999999991,-4.161285780223E-06,0.)); +#497837 = ORIENTED_EDGE('',*,*,#497838,.T.); +#497838 = EDGE_CURVE('',#497830,#497839,#497841,.T.); +#497839 = VERTEX_POINT('',#497840); +#497840 = CARTESIAN_POINT('',(136.25,-119.775,-5.E-02)); +#497841 = LINE('',#497842,#497843); +#497842 = CARTESIAN_POINT('',(136.75,-119.775,-5.E-02)); +#497843 = VECTOR('',#497844,1.); +#497844 = DIRECTION('',(-1.,0.,0.)); +#497845 = ORIENTED_EDGE('',*,*,#497846,.T.); +#497846 = EDGE_CURVE('',#497839,#497847,#497849,.T.); +#497847 = VERTEX_POINT('',#497848); +#497848 = CARTESIAN_POINT('',(136.,-120.025,-5.E-02)); +#497849 = CIRCLE('',#497850,0.249998959685); +#497850 = AXIS2_PLACEMENT_3D('',#497851,#497852,#497853); +#497851 = CARTESIAN_POINT('',(136.24999895968,-120.0249989596,-5.E-02)); +#497852 = DIRECTION('',(0.,0.,1.)); +#497853 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#497854 = ORIENTED_EDGE('',*,*,#497855,.T.); +#497855 = EDGE_CURVE('',#497847,#497856,#497858,.T.); +#497856 = VERTEX_POINT('',#497857); +#497857 = CARTESIAN_POINT('',(136.,-120.975,-5.E-02)); +#497858 = LINE('',#497859,#497860); +#497859 = CARTESIAN_POINT('',(136.,-120.025,-5.E-02)); +#497860 = VECTOR('',#497861,1.); +#497861 = DIRECTION('',(0.,-1.,0.)); +#497862 = ORIENTED_EDGE('',*,*,#497863,.T.); +#497863 = EDGE_CURVE('',#497856,#497864,#497866,.T.); +#497864 = VERTEX_POINT('',#497865); +#497865 = CARTESIAN_POINT('',(136.25,-121.225,-5.E-02)); +#497866 = CIRCLE('',#497867,0.249998959685); +#497867 = AXIS2_PLACEMENT_3D('',#497868,#497869,#497870); +#497868 = CARTESIAN_POINT('',(136.24999895968,-120.9750010403,-5.E-02)); +#497869 = DIRECTION('',(0.,0.,1.)); +#497870 = DIRECTION('',(-0.999999999991,4.161285780223E-06,0.)); +#497871 = ORIENTED_EDGE('',*,*,#497872,.T.); +#497872 = EDGE_CURVE('',#497864,#497873,#497875,.T.); +#497873 = VERTEX_POINT('',#497874); +#497874 = CARTESIAN_POINT('',(136.75,-121.225,-5.E-02)); +#497875 = LINE('',#497876,#497877); +#497876 = CARTESIAN_POINT('',(136.25,-121.225,-5.E-02)); +#497877 = VECTOR('',#497878,1.); +#497878 = DIRECTION('',(1.,0.,0.)); +#497879 = ORIENTED_EDGE('',*,*,#497880,.T.); +#497880 = EDGE_CURVE('',#497873,#497881,#497883,.T.); +#497881 = VERTEX_POINT('',#497882); +#497882 = CARTESIAN_POINT('',(137.,-120.975,-5.E-02)); +#497883 = CIRCLE('',#497884,0.249998959685); +#497884 = AXIS2_PLACEMENT_3D('',#497885,#497886,#497887); +#497885 = CARTESIAN_POINT('',(136.75000104031,-120.9750010403,-5.E-02)); +#497886 = DIRECTION('',(0.,0.,1.)); +#497887 = DIRECTION('',(-4.161285837066E-06,-0.999999999991,0.)); +#497888 = ORIENTED_EDGE('',*,*,#497889,.T.); +#497889 = EDGE_CURVE('',#497881,#497828,#497890,.T.); +#497890 = LINE('',#497891,#497892); +#497891 = CARTESIAN_POINT('',(137.,-120.975,-5.E-02)); +#497892 = VECTOR('',#497893,1.); +#497893 = DIRECTION('',(0.,1.,0.)); +#497894 = FACE_BOUND('',#497895,.T.); +#497895 = EDGE_LOOP('',(#497896,#497907,#497915,#497924,#497932,#497941, + #497949,#497958)); +#497896 = ORIENTED_EDGE('',*,*,#497897,.T.); +#497897 = EDGE_CURVE('',#497898,#497900,#497902,.T.); +#497898 = VERTEX_POINT('',#497899); +#497899 = CARTESIAN_POINT('',(138.9,-120.025,-5.E-02)); +#497900 = VERTEX_POINT('',#497901); +#497901 = CARTESIAN_POINT('',(138.65,-119.775,-5.E-02)); +#497902 = CIRCLE('',#497903,0.249998959685); +#497903 = AXIS2_PLACEMENT_3D('',#497904,#497905,#497906); +#497904 = CARTESIAN_POINT('',(138.65000104031,-120.0249989596,-5.E-02)); +#497905 = DIRECTION('',(0.,0.,1.)); +#497906 = DIRECTION('',(0.999999999991,-4.161285780222E-06,0.)); +#497907 = ORIENTED_EDGE('',*,*,#497908,.T.); +#497908 = EDGE_CURVE('',#497900,#497909,#497911,.T.); +#497909 = VERTEX_POINT('',#497910); +#497910 = CARTESIAN_POINT('',(138.15,-119.775,-5.E-02)); +#497911 = LINE('',#497912,#497913); +#497912 = CARTESIAN_POINT('',(138.65,-119.775,-5.E-02)); +#497913 = VECTOR('',#497914,1.); +#497914 = DIRECTION('',(-1.,0.,0.)); +#497915 = ORIENTED_EDGE('',*,*,#497916,.T.); +#497916 = EDGE_CURVE('',#497909,#497917,#497919,.T.); +#497917 = VERTEX_POINT('',#497918); +#497918 = CARTESIAN_POINT('',(137.9,-120.025,-5.E-02)); +#497919 = CIRCLE('',#497920,0.249998959685); +#497920 = AXIS2_PLACEMENT_3D('',#497921,#497922,#497923); +#497921 = CARTESIAN_POINT('',(138.14999895968,-120.0249989596,-5.E-02)); +#497922 = DIRECTION('',(0.,0.,1.)); +#497923 = DIRECTION('',(4.161285950754E-06,0.999999999991,-0.)); +#497924 = ORIENTED_EDGE('',*,*,#497925,.T.); +#497925 = EDGE_CURVE('',#497917,#497926,#497928,.T.); +#497926 = VERTEX_POINT('',#497927); +#497927 = CARTESIAN_POINT('',(137.9,-120.975,-5.E-02)); +#497928 = LINE('',#497929,#497930); +#497929 = CARTESIAN_POINT('',(137.9,-120.025,-5.E-02)); +#497930 = VECTOR('',#497931,1.); +#497931 = DIRECTION('',(0.,-1.,0.)); +#497932 = ORIENTED_EDGE('',*,*,#497933,.T.); +#497933 = EDGE_CURVE('',#497926,#497934,#497936,.T.); +#497934 = VERTEX_POINT('',#497935); +#497935 = CARTESIAN_POINT('',(138.15,-121.225,-5.E-02)); +#497936 = CIRCLE('',#497937,0.249998959685); +#497937 = AXIS2_PLACEMENT_3D('',#497938,#497939,#497940); +#497938 = CARTESIAN_POINT('',(138.14999895968,-120.9750010403,-5.E-02)); +#497939 = DIRECTION('',(0.,0.,1.)); +#497940 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#497941 = ORIENTED_EDGE('',*,*,#497942,.T.); +#497942 = EDGE_CURVE('',#497934,#497943,#497945,.T.); +#497943 = VERTEX_POINT('',#497944); +#497944 = CARTESIAN_POINT('',(138.65,-121.225,-5.E-02)); +#497945 = LINE('',#497946,#497947); +#497946 = CARTESIAN_POINT('',(138.15,-121.225,-5.E-02)); +#497947 = VECTOR('',#497948,1.); +#497948 = DIRECTION('',(1.,0.,0.)); +#497949 = ORIENTED_EDGE('',*,*,#497950,.T.); +#497950 = EDGE_CURVE('',#497943,#497951,#497953,.T.); +#497951 = VERTEX_POINT('',#497952); +#497952 = CARTESIAN_POINT('',(138.9,-120.975,-5.E-02)); +#497953 = CIRCLE('',#497954,0.249998959685); +#497954 = AXIS2_PLACEMENT_3D('',#497955,#497956,#497957); +#497955 = CARTESIAN_POINT('',(138.65000104031,-120.9750010403,-5.E-02)); +#497956 = DIRECTION('',(0.,0.,1.)); +#497957 = DIRECTION('',(-4.161285723379E-06,-0.999999999991,0.)); +#497958 = ORIENTED_EDGE('',*,*,#497959,.T.); +#497959 = EDGE_CURVE('',#497951,#497898,#497960,.T.); +#497960 = LINE('',#497961,#497962); +#497961 = CARTESIAN_POINT('',(138.9,-120.975,-5.E-02)); +#497962 = VECTOR('',#497963,1.); +#497963 = DIRECTION('',(0.,1.,0.)); +#497964 = FACE_BOUND('',#497965,.T.); +#497965 = EDGE_LOOP('',(#497966,#497977,#497985,#497994,#498002,#498011, + #498019,#498028)); +#497966 = ORIENTED_EDGE('',*,*,#497967,.T.); +#497967 = EDGE_CURVE('',#497968,#497970,#497972,.T.); +#497968 = VERTEX_POINT('',#497969); +#497969 = CARTESIAN_POINT('',(146.76,-120.62,-5.E-02)); +#497970 = VERTEX_POINT('',#497971); +#497971 = CARTESIAN_POINT('',(146.62,-120.48,-5.E-02)); +#497972 = CIRCLE('',#497973,0.139999827125); +#497973 = AXIS2_PLACEMENT_3D('',#497974,#497975,#497976); +#497974 = CARTESIAN_POINT('',(146.62000017287,-120.6199998271,-5.E-02)); +#497975 = DIRECTION('',(0.,0.,1.)); +#497976 = DIRECTION('',(0.999999999999,-1.23482055276E-06,0.)); +#497977 = ORIENTED_EDGE('',*,*,#497978,.T.); +#497978 = EDGE_CURVE('',#497970,#497979,#497981,.T.); +#497979 = VERTEX_POINT('',#497980); +#497980 = CARTESIAN_POINT('',(146.28,-120.48,-5.E-02)); +#497981 = LINE('',#497982,#497983); +#497982 = CARTESIAN_POINT('',(146.62,-120.48,-5.E-02)); +#497983 = VECTOR('',#497984,1.); +#497984 = DIRECTION('',(-1.,0.,0.)); +#497985 = ORIENTED_EDGE('',*,*,#497986,.T.); +#497986 = EDGE_CURVE('',#497979,#497987,#497989,.T.); +#497987 = VERTEX_POINT('',#497988); +#497988 = CARTESIAN_POINT('',(146.14,-120.62,-5.E-02)); +#497989 = CIRCLE('',#497990,0.139999827125); +#497990 = AXIS2_PLACEMENT_3D('',#497991,#497992,#497993); +#497991 = CARTESIAN_POINT('',(146.27999982712,-120.6199998271,-5.E-02)); +#497992 = DIRECTION('',(0.,0.,1.)); +#497993 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#497994 = ORIENTED_EDGE('',*,*,#497995,.T.); +#497995 = EDGE_CURVE('',#497987,#497996,#497998,.T.); +#497996 = VERTEX_POINT('',#497997); +#497997 = CARTESIAN_POINT('',(146.14,-120.9,-5.E-02)); +#497998 = LINE('',#497999,#498000); +#497999 = CARTESIAN_POINT('',(146.14,-120.62,-5.E-02)); +#498000 = VECTOR('',#498001,1.); +#498001 = DIRECTION('',(0.,-1.,0.)); +#498002 = ORIENTED_EDGE('',*,*,#498003,.T.); +#498003 = EDGE_CURVE('',#497996,#498004,#498006,.T.); +#498004 = VERTEX_POINT('',#498005); +#498005 = CARTESIAN_POINT('',(146.28,-121.04,-5.E-02)); +#498006 = CIRCLE('',#498007,0.139999827125); +#498007 = AXIS2_PLACEMENT_3D('',#498008,#498009,#498010); +#498008 = CARTESIAN_POINT('',(146.27999982712,-120.9000001728,-5.E-02)); +#498009 = DIRECTION('',(0.,0.,1.)); +#498010 = DIRECTION('',(-0.999999999999,1.234820146735E-06,0.)); +#498011 = ORIENTED_EDGE('',*,*,#498012,.T.); +#498012 = EDGE_CURVE('',#498004,#498013,#498015,.T.); +#498013 = VERTEX_POINT('',#498014); +#498014 = CARTESIAN_POINT('',(146.62,-121.04,-5.E-02)); +#498015 = LINE('',#498016,#498017); +#498016 = CARTESIAN_POINT('',(146.28,-121.04,-5.E-02)); +#498017 = VECTOR('',#498018,1.); +#498018 = DIRECTION('',(1.,0.,0.)); +#498019 = ORIENTED_EDGE('',*,*,#498020,.T.); +#498020 = EDGE_CURVE('',#498013,#498021,#498023,.T.); +#498021 = VERTEX_POINT('',#498022); +#498022 = CARTESIAN_POINT('',(146.76,-120.9,-5.E-02)); +#498023 = CIRCLE('',#498024,0.139999827125); +#498024 = AXIS2_PLACEMENT_3D('',#498025,#498026,#498027); +#498025 = CARTESIAN_POINT('',(146.62000017287,-120.9000001728,-5.E-02)); +#498026 = DIRECTION('',(0.,0.,1.)); +#498027 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#498028 = ORIENTED_EDGE('',*,*,#498029,.T.); +#498029 = EDGE_CURVE('',#498021,#497968,#498030,.T.); +#498030 = LINE('',#498031,#498032); +#498031 = CARTESIAN_POINT('',(146.76,-120.9,-5.E-02)); +#498032 = VECTOR('',#498033,1.); +#498033 = DIRECTION('',(0.,1.,0.)); +#498034 = FACE_BOUND('',#498035,.T.); +#498035 = EDGE_LOOP('',(#498036,#498047,#498055,#498064,#498072,#498081, + #498089,#498098)); +#498036 = ORIENTED_EDGE('',*,*,#498037,.T.); +#498037 = EDGE_CURVE('',#498038,#498040,#498042,.T.); +#498038 = VERTEX_POINT('',#498039); +#498039 = CARTESIAN_POINT('',(128.17,-119.815,-5.E-02)); +#498040 = VERTEX_POINT('',#498041); +#498041 = CARTESIAN_POINT('',(128.035,-119.68,-5.E-02)); +#498042 = CIRCLE('',#498043,0.135001418495); +#498043 = AXIS2_PLACEMENT_3D('',#498044,#498045,#498046); +#498044 = CARTESIAN_POINT('',(128.03499858151,-119.8150014184,-5.E-02)); +#498045 = DIRECTION('',(0.,0.,1.)); +#498046 = DIRECTION('',(0.999999999945,1.050720641103E-05,-0.)); +#498047 = ORIENTED_EDGE('',*,*,#498048,.T.); +#498048 = EDGE_CURVE('',#498040,#498049,#498051,.T.); +#498049 = VERTEX_POINT('',#498050); +#498050 = CARTESIAN_POINT('',(127.765,-119.68,-5.E-02)); +#498051 = LINE('',#498052,#498053); +#498052 = CARTESIAN_POINT('',(128.035,-119.68,-5.E-02)); +#498053 = VECTOR('',#498054,1.); +#498054 = DIRECTION('',(-1.,0.,0.)); +#498055 = ORIENTED_EDGE('',*,*,#498056,.T.); +#498056 = EDGE_CURVE('',#498049,#498057,#498059,.T.); +#498057 = VERTEX_POINT('',#498058); +#498058 = CARTESIAN_POINT('',(127.63,-119.815,-5.E-02)); +#498059 = CIRCLE('',#498060,0.135001418495); +#498060 = AXIS2_PLACEMENT_3D('',#498061,#498062,#498063); +#498061 = CARTESIAN_POINT('',(127.76500141848,-119.8150014184,-5.E-02)); +#498062 = DIRECTION('',(0.,0.,1.)); +#498063 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#498064 = ORIENTED_EDGE('',*,*,#498065,.T.); +#498065 = EDGE_CURVE('',#498057,#498066,#498068,.T.); +#498066 = VERTEX_POINT('',#498067); +#498067 = CARTESIAN_POINT('',(127.63,-120.185,-5.E-02)); +#498068 = LINE('',#498069,#498070); +#498069 = CARTESIAN_POINT('',(127.63,-119.815,-5.E-02)); +#498070 = VECTOR('',#498071,1.); +#498071 = DIRECTION('',(0.,-1.,0.)); +#498072 = ORIENTED_EDGE('',*,*,#498073,.T.); +#498073 = EDGE_CURVE('',#498066,#498074,#498076,.T.); +#498074 = VERTEX_POINT('',#498075); +#498075 = CARTESIAN_POINT('',(127.765,-120.32,-5.E-02)); +#498076 = CIRCLE('',#498077,0.135001418495); +#498077 = AXIS2_PLACEMENT_3D('',#498078,#498079,#498080); +#498078 = CARTESIAN_POINT('',(127.76500141848,-120.1849985815,-5.E-02)); +#498079 = DIRECTION('',(0.,0.,1.)); +#498080 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#498081 = ORIENTED_EDGE('',*,*,#498082,.T.); +#498082 = EDGE_CURVE('',#498074,#498083,#498085,.T.); +#498083 = VERTEX_POINT('',#498084); +#498084 = CARTESIAN_POINT('',(128.035,-120.32,-5.E-02)); +#498085 = LINE('',#498086,#498087); +#498086 = CARTESIAN_POINT('',(127.765,-120.32,-5.E-02)); +#498087 = VECTOR('',#498088,1.); +#498088 = DIRECTION('',(1.,0.,0.)); +#498089 = ORIENTED_EDGE('',*,*,#498090,.T.); +#498090 = EDGE_CURVE('',#498083,#498091,#498093,.T.); +#498091 = VERTEX_POINT('',#498092); +#498092 = CARTESIAN_POINT('',(128.17,-120.185,-5.E-02)); +#498093 = CIRCLE('',#498094,0.135001418495); +#498094 = AXIS2_PLACEMENT_3D('',#498095,#498096,#498097); +#498095 = CARTESIAN_POINT('',(128.03499858151,-120.1849985815,-5.E-02)); +#498096 = DIRECTION('',(0.,0.,1.)); +#498097 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#498098 = ORIENTED_EDGE('',*,*,#498099,.T.); +#498099 = EDGE_CURVE('',#498091,#498038,#498100,.T.); +#498100 = LINE('',#498101,#498102); +#498101 = CARTESIAN_POINT('',(128.17,-120.185,-5.E-02)); +#498102 = VECTOR('',#498103,1.); +#498103 = DIRECTION('',(0.,1.,0.)); +#498104 = FACE_BOUND('',#498105,.T.); +#498105 = EDGE_LOOP('',(#498106,#498117,#498125,#498134,#498142,#498151, + #498159,#498168)); +#498106 = ORIENTED_EDGE('',*,*,#498107,.T.); +#498107 = EDGE_CURVE('',#498108,#498110,#498112,.T.); +#498108 = VERTEX_POINT('',#498109); +#498109 = CARTESIAN_POINT('',(129.19,-119.815,-5.E-02)); +#498110 = VERTEX_POINT('',#498111); +#498111 = CARTESIAN_POINT('',(129.055,-119.68,-5.E-02)); +#498112 = CIRCLE('',#498113,0.135001418495); +#498113 = AXIS2_PLACEMENT_3D('',#498114,#498115,#498116); +#498114 = CARTESIAN_POINT('',(129.05499858151,-119.8150014184,-5.E-02)); +#498115 = DIRECTION('',(0.,0.,1.)); +#498116 = DIRECTION('',(0.999999999945,1.050720641103E-05,-0.)); +#498117 = ORIENTED_EDGE('',*,*,#498118,.T.); +#498118 = EDGE_CURVE('',#498110,#498119,#498121,.T.); +#498119 = VERTEX_POINT('',#498120); +#498120 = CARTESIAN_POINT('',(128.785,-119.68,-5.E-02)); +#498121 = LINE('',#498122,#498123); +#498122 = CARTESIAN_POINT('',(129.055,-119.68,-5.E-02)); +#498123 = VECTOR('',#498124,1.); +#498124 = DIRECTION('',(-1.,0.,0.)); +#498125 = ORIENTED_EDGE('',*,*,#498126,.T.); +#498126 = EDGE_CURVE('',#498119,#498127,#498129,.T.); +#498127 = VERTEX_POINT('',#498128); +#498128 = CARTESIAN_POINT('',(128.65,-119.815,-5.E-02)); +#498129 = CIRCLE('',#498130,0.135001418495); +#498130 = AXIS2_PLACEMENT_3D('',#498131,#498132,#498133); +#498131 = CARTESIAN_POINT('',(128.78500141848,-119.8150014184,-5.E-02)); +#498132 = DIRECTION('',(0.,0.,1.)); +#498133 = DIRECTION('',(-1.050720630576E-05,0.999999999945,0.)); +#498134 = ORIENTED_EDGE('',*,*,#498135,.T.); +#498135 = EDGE_CURVE('',#498127,#498136,#498138,.T.); +#498136 = VERTEX_POINT('',#498137); +#498137 = CARTESIAN_POINT('',(128.65,-120.185,-5.E-02)); +#498138 = LINE('',#498139,#498140); +#498139 = CARTESIAN_POINT('',(128.65,-119.815,-5.E-02)); +#498140 = VECTOR('',#498141,1.); +#498141 = DIRECTION('',(0.,-1.,0.)); +#498142 = ORIENTED_EDGE('',*,*,#498143,.T.); +#498143 = EDGE_CURVE('',#498136,#498144,#498146,.T.); +#498144 = VERTEX_POINT('',#498145); +#498145 = CARTESIAN_POINT('',(128.785,-120.32,-5.E-02)); +#498146 = CIRCLE('',#498147,0.135001418495); +#498147 = AXIS2_PLACEMENT_3D('',#498148,#498149,#498150); +#498148 = CARTESIAN_POINT('',(128.78500141848,-120.1849985815,-5.E-02)); +#498149 = DIRECTION('',(0.,0.,1.)); +#498150 = DIRECTION('',(-0.999999999945,-1.050720641103E-05,0.)); +#498151 = ORIENTED_EDGE('',*,*,#498152,.T.); +#498152 = EDGE_CURVE('',#498144,#498153,#498155,.T.); +#498153 = VERTEX_POINT('',#498154); +#498154 = CARTESIAN_POINT('',(129.055,-120.32,-5.E-02)); +#498155 = LINE('',#498156,#498157); +#498156 = CARTESIAN_POINT('',(128.785,-120.32,-5.E-02)); +#498157 = VECTOR('',#498158,1.); +#498158 = DIRECTION('',(1.,0.,0.)); +#498159 = ORIENTED_EDGE('',*,*,#498160,.T.); +#498160 = EDGE_CURVE('',#498153,#498161,#498163,.T.); +#498161 = VERTEX_POINT('',#498162); +#498162 = CARTESIAN_POINT('',(129.19,-120.185,-5.E-02)); +#498163 = CIRCLE('',#498164,0.135001418495); +#498164 = AXIS2_PLACEMENT_3D('',#498165,#498166,#498167); +#498165 = CARTESIAN_POINT('',(129.05499858151,-120.1849985815,-5.E-02)); +#498166 = DIRECTION('',(0.,0.,1.)); +#498167 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#498168 = ORIENTED_EDGE('',*,*,#498169,.T.); +#498169 = EDGE_CURVE('',#498161,#498108,#498170,.T.); +#498170 = LINE('',#498171,#498172); +#498171 = CARTESIAN_POINT('',(129.19,-120.185,-5.E-02)); +#498172 = VECTOR('',#498173,1.); +#498173 = DIRECTION('',(0.,1.,0.)); +#498174 = FACE_BOUND('',#498175,.T.); +#498175 = EDGE_LOOP('',(#498176,#498187,#498195,#498204,#498212,#498221, + #498229,#498238)); +#498176 = ORIENTED_EDGE('',*,*,#498177,.T.); +#498177 = EDGE_CURVE('',#498178,#498180,#498182,.T.); +#498178 = VERTEX_POINT('',#498179); +#498179 = CARTESIAN_POINT('',(149.2375,-119.85,-5.E-02)); +#498180 = VERTEX_POINT('',#498181); +#498181 = CARTESIAN_POINT('',(149.0875,-119.7,-5.E-02)); +#498182 = CIRCLE('',#498183,0.150000058649); +#498183 = AXIS2_PLACEMENT_3D('',#498184,#498185,#498186); +#498184 = CARTESIAN_POINT('',(149.08749994135,-119.8500000586,-5.E-02)); +#498185 = DIRECTION('',(0.,0.,1.)); +#498186 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#498187 = ORIENTED_EDGE('',*,*,#498188,.T.); +#498188 = EDGE_CURVE('',#498180,#498189,#498191,.T.); +#498189 = VERTEX_POINT('',#498190); +#498190 = CARTESIAN_POINT('',(147.9125,-119.7,-5.E-02)); +#498191 = LINE('',#498192,#498193); +#498192 = CARTESIAN_POINT('',(149.0875,-119.7,-5.E-02)); +#498193 = VECTOR('',#498194,1.); +#498194 = DIRECTION('',(-1.,0.,0.)); +#498195 = ORIENTED_EDGE('',*,*,#498196,.T.); +#498196 = EDGE_CURVE('',#498189,#498197,#498199,.T.); +#498197 = VERTEX_POINT('',#498198); +#498198 = CARTESIAN_POINT('',(147.7625,-119.85,-5.E-02)); +#498199 = CIRCLE('',#498200,0.150000058649); +#498200 = AXIS2_PLACEMENT_3D('',#498201,#498202,#498203); +#498201 = CARTESIAN_POINT('',(147.91250005864,-119.8500000586,-5.E-02)); +#498202 = DIRECTION('',(0.,0.,1.)); +#498203 = DIRECTION('',(-3.90995219498E-07,1.,0.)); +#498204 = ORIENTED_EDGE('',*,*,#498205,.T.); +#498205 = EDGE_CURVE('',#498197,#498206,#498208,.T.); +#498206 = VERTEX_POINT('',#498207); +#498207 = CARTESIAN_POINT('',(147.7625,-120.15,-5.E-02)); +#498208 = LINE('',#498209,#498210); +#498209 = CARTESIAN_POINT('',(147.7625,-119.85,-5.E-02)); +#498210 = VECTOR('',#498211,1.); +#498211 = DIRECTION('',(0.,-1.,0.)); +#498212 = ORIENTED_EDGE('',*,*,#498213,.T.); +#498213 = EDGE_CURVE('',#498206,#498214,#498216,.T.); +#498214 = VERTEX_POINT('',#498215); +#498215 = CARTESIAN_POINT('',(147.9125,-120.3,-5.E-02)); +#498216 = CIRCLE('',#498217,0.150000058649); +#498217 = AXIS2_PLACEMENT_3D('',#498218,#498219,#498220); +#498218 = CARTESIAN_POINT('',(147.91250005864,-120.1499999413,-5.E-02)); +#498219 = DIRECTION('',(0.,0.,1.)); +#498220 = DIRECTION('',(-1.,-3.90995408976E-07,0.)); +#498221 = ORIENTED_EDGE('',*,*,#498222,.T.); +#498222 = EDGE_CURVE('',#498214,#498223,#498225,.T.); +#498223 = VERTEX_POINT('',#498224); +#498224 = CARTESIAN_POINT('',(149.0875,-120.3,-5.E-02)); +#498225 = LINE('',#498226,#498227); +#498226 = CARTESIAN_POINT('',(147.9125,-120.3,-5.E-02)); +#498227 = VECTOR('',#498228,1.); +#498228 = DIRECTION('',(1.,0.,0.)); +#498229 = ORIENTED_EDGE('',*,*,#498230,.T.); +#498230 = EDGE_CURVE('',#498223,#498231,#498233,.T.); +#498231 = VERTEX_POINT('',#498232); +#498232 = CARTESIAN_POINT('',(149.2375,-120.15,-5.E-02)); +#498233 = CIRCLE('',#498234,0.150000058649); +#498234 = AXIS2_PLACEMENT_3D('',#498235,#498236,#498237); +#498235 = CARTESIAN_POINT('',(149.08749994135,-120.1499999413,-5.E-02)); +#498236 = DIRECTION('',(0.,0.,1.)); +#498237 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#498238 = ORIENTED_EDGE('',*,*,#498239,.T.); +#498239 = EDGE_CURVE('',#498231,#498178,#498240,.T.); +#498240 = LINE('',#498241,#498242); +#498241 = CARTESIAN_POINT('',(149.2375,-120.15,-5.E-02)); +#498242 = VECTOR('',#498243,1.); +#498243 = DIRECTION('',(0.,1.,0.)); +#498244 = FACE_BOUND('',#498245,.T.); +#498245 = EDGE_LOOP('',(#498246,#498257,#498265,#498274,#498282,#498291, + #498299,#498308)); +#498246 = ORIENTED_EDGE('',*,*,#498247,.T.); +#498247 = EDGE_CURVE('',#498248,#498250,#498252,.T.); +#498248 = VERTEX_POINT('',#498249); +#498249 = CARTESIAN_POINT('',(146.76,-119.66,-5.E-02)); +#498250 = VERTEX_POINT('',#498251); +#498251 = CARTESIAN_POINT('',(146.62,-119.52,-5.E-02)); +#498252 = CIRCLE('',#498253,0.139999827125); +#498253 = AXIS2_PLACEMENT_3D('',#498254,#498255,#498256); +#498254 = CARTESIAN_POINT('',(146.62000017287,-119.6599998271,-5.E-02)); +#498255 = DIRECTION('',(0.,0.,1.)); +#498256 = DIRECTION('',(0.999999999999,-1.23482055276E-06,0.)); +#498257 = ORIENTED_EDGE('',*,*,#498258,.T.); +#498258 = EDGE_CURVE('',#498250,#498259,#498261,.T.); +#498259 = VERTEX_POINT('',#498260); +#498260 = CARTESIAN_POINT('',(146.28,-119.52,-5.E-02)); +#498261 = LINE('',#498262,#498263); +#498262 = CARTESIAN_POINT('',(146.62,-119.52,-5.E-02)); +#498263 = VECTOR('',#498264,1.); +#498264 = DIRECTION('',(-1.,0.,0.)); +#498265 = ORIENTED_EDGE('',*,*,#498266,.T.); +#498266 = EDGE_CURVE('',#498259,#498267,#498269,.T.); +#498267 = VERTEX_POINT('',#498268); +#498268 = CARTESIAN_POINT('',(146.14,-119.66,-5.E-02)); +#498269 = CIRCLE('',#498270,0.139999827125); +#498270 = AXIS2_PLACEMENT_3D('',#498271,#498272,#498273); +#498271 = CARTESIAN_POINT('',(146.27999982712,-119.6599998271,-5.E-02)); +#498272 = DIRECTION('',(0.,0.,1.)); +#498273 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#498274 = ORIENTED_EDGE('',*,*,#498275,.T.); +#498275 = EDGE_CURVE('',#498267,#498276,#498278,.T.); +#498276 = VERTEX_POINT('',#498277); +#498277 = CARTESIAN_POINT('',(146.14,-119.94,-5.E-02)); +#498278 = LINE('',#498279,#498280); +#498279 = CARTESIAN_POINT('',(146.14,-119.66,-5.E-02)); +#498280 = VECTOR('',#498281,1.); +#498281 = DIRECTION('',(0.,-1.,0.)); +#498282 = ORIENTED_EDGE('',*,*,#498283,.T.); +#498283 = EDGE_CURVE('',#498276,#498284,#498286,.T.); +#498284 = VERTEX_POINT('',#498285); +#498285 = CARTESIAN_POINT('',(146.28,-120.08,-5.E-02)); +#498286 = CIRCLE('',#498287,0.139999827125); +#498287 = AXIS2_PLACEMENT_3D('',#498288,#498289,#498290); +#498288 = CARTESIAN_POINT('',(146.27999982712,-119.9400001728,-5.E-02)); +#498289 = DIRECTION('',(0.,0.,1.)); +#498290 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#498291 = ORIENTED_EDGE('',*,*,#498292,.T.); +#498292 = EDGE_CURVE('',#498284,#498293,#498295,.T.); +#498293 = VERTEX_POINT('',#498294); +#498294 = CARTESIAN_POINT('',(146.62,-120.08,-5.E-02)); +#498295 = LINE('',#498296,#498297); +#498296 = CARTESIAN_POINT('',(146.28,-120.08,-5.E-02)); +#498297 = VECTOR('',#498298,1.); +#498298 = DIRECTION('',(1.,0.,0.)); +#498299 = ORIENTED_EDGE('',*,*,#498300,.T.); +#498300 = EDGE_CURVE('',#498293,#498301,#498303,.T.); +#498301 = VERTEX_POINT('',#498302); +#498302 = CARTESIAN_POINT('',(146.76,-119.94,-5.E-02)); +#498303 = CIRCLE('',#498304,0.139999827125); +#498304 = AXIS2_PLACEMENT_3D('',#498305,#498306,#498307); +#498305 = CARTESIAN_POINT('',(146.62000017287,-119.9400001728,-5.E-02)); +#498306 = DIRECTION('',(0.,0.,1.)); +#498307 = DIRECTION('',(-1.234820451254E-06,-0.999999999999,0.)); +#498308 = ORIENTED_EDGE('',*,*,#498309,.T.); +#498309 = EDGE_CURVE('',#498301,#498248,#498310,.T.); +#498310 = LINE('',#498311,#498312); +#498311 = CARTESIAN_POINT('',(146.76,-119.94,-5.E-02)); +#498312 = VECTOR('',#498313,1.); +#498313 = DIRECTION('',(0.,1.,0.)); +#498314 = FACE_BOUND('',#498315,.T.); +#498315 = EDGE_LOOP('',(#498316,#498326,#498334,#498342,#498350,#498358, + #498366,#498374,#498382,#498390,#498398,#498406)); +#498316 = ORIENTED_EDGE('',*,*,#498317,.T.); +#498317 = EDGE_CURVE('',#498318,#498320,#498322,.T.); +#498318 = VERTEX_POINT('',#498319); +#498319 = CARTESIAN_POINT('',(132.234536,-119.657464,-5.E-02)); +#498320 = VERTEX_POINT('',#498321); +#498321 = CARTESIAN_POINT('',(132.206581,-119.645257,-5.E-02)); +#498322 = LINE('',#498323,#498324); +#498323 = CARTESIAN_POINT('',(132.234536,-119.657464,-5.E-02)); +#498324 = VECTOR('',#498325,1.); +#498325 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#498326 = ORIENTED_EDGE('',*,*,#498327,.T.); +#498327 = EDGE_CURVE('',#498320,#498328,#498330,.T.); +#498328 = VERTEX_POINT('',#498329); +#498329 = CARTESIAN_POINT('',(131.695,-119.645,-5.E-02)); +#498330 = LINE('',#498331,#498332); +#498331 = CARTESIAN_POINT('',(132.206581,-119.645257,-5.E-02)); +#498332 = VECTOR('',#498333,1.); +#498333 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#498334 = ORIENTED_EDGE('',*,*,#498335,.T.); +#498335 = EDGE_CURVE('',#498328,#498336,#498338,.T.); +#498336 = VERTEX_POINT('',#498337); +#498337 = CARTESIAN_POINT('',(131.669464,-119.654464,-5.E-02)); +#498338 = LINE('',#498339,#498340); +#498339 = CARTESIAN_POINT('',(131.695,-119.645,-5.E-02)); +#498340 = VECTOR('',#498341,1.); +#498341 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498342 = ORIENTED_EDGE('',*,*,#498343,.T.); +#498343 = EDGE_CURVE('',#498336,#498344,#498346,.T.); +#498344 = VERTEX_POINT('',#498345); +#498345 = CARTESIAN_POINT('',(131.647257,-119.683419,-5.E-02)); +#498346 = LINE('',#498347,#498348); +#498347 = CARTESIAN_POINT('',(131.669464,-119.654464,-5.E-02)); +#498348 = VECTOR('',#498349,1.); +#498349 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498350 = ORIENTED_EDGE('',*,*,#498351,.T.); +#498351 = EDGE_CURVE('',#498344,#498352,#498354,.T.); +#498352 = VERTEX_POINT('',#498353); +#498353 = CARTESIAN_POINT('',(131.645,-119.905,-5.E-02)); +#498354 = LINE('',#498355,#498356); +#498355 = CARTESIAN_POINT('',(131.647257,-119.683419,-5.E-02)); +#498356 = VECTOR('',#498357,1.); +#498357 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498358 = ORIENTED_EDGE('',*,*,#498359,.T.); +#498359 = EDGE_CURVE('',#498352,#498360,#498362,.T.); +#498360 = VERTEX_POINT('',#498361); +#498361 = CARTESIAN_POINT('',(131.654464,-119.930536,-5.E-02)); +#498362 = LINE('',#498363,#498364); +#498363 = CARTESIAN_POINT('',(131.645,-119.905,-5.E-02)); +#498364 = VECTOR('',#498365,1.); +#498365 = DIRECTION('',(0.347515265307,-0.937674325328,0.)); +#498366 = ORIENTED_EDGE('',*,*,#498367,.T.); +#498367 = EDGE_CURVE('',#498360,#498368,#498370,.T.); +#498368 = VERTEX_POINT('',#498369); +#498369 = CARTESIAN_POINT('',(131.683419,-119.952743,-5.E-02)); +#498370 = LINE('',#498371,#498372); +#498371 = CARTESIAN_POINT('',(131.654464,-119.930536,-5.E-02)); +#498372 = VECTOR('',#498373,1.); +#498373 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#498374 = ORIENTED_EDGE('',*,*,#498375,.T.); +#498375 = EDGE_CURVE('',#498368,#498376,#498378,.T.); +#498376 = VERTEX_POINT('',#498377); +#498377 = CARTESIAN_POINT('',(132.205,-119.955,-5.E-02)); +#498378 = LINE('',#498379,#498380); +#498379 = CARTESIAN_POINT('',(131.683419,-119.952743,-5.E-02)); +#498380 = VECTOR('',#498381,1.); +#498381 = DIRECTION('',(0.99999063768,-4.32718766451E-03,0.)); +#498382 = ORIENTED_EDGE('',*,*,#498383,.T.); +#498383 = EDGE_CURVE('',#498376,#498384,#498386,.T.); +#498384 = VERTEX_POINT('',#498385); +#498385 = CARTESIAN_POINT('',(132.230536,-119.945536,-5.E-02)); +#498386 = LINE('',#498387,#498388); +#498387 = CARTESIAN_POINT('',(132.205,-119.955,-5.E-02)); +#498388 = VECTOR('',#498389,1.); +#498389 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#498390 = ORIENTED_EDGE('',*,*,#498391,.T.); +#498391 = EDGE_CURVE('',#498384,#498392,#498394,.T.); +#498392 = VERTEX_POINT('',#498393); +#498393 = CARTESIAN_POINT('',(132.252743,-119.916581,-5.E-02)); +#498394 = LINE('',#498395,#498396); +#498395 = CARTESIAN_POINT('',(132.230536,-119.945536,-5.E-02)); +#498396 = VECTOR('',#498397,1.); +#498397 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#498398 = ORIENTED_EDGE('',*,*,#498399,.T.); +#498399 = EDGE_CURVE('',#498392,#498400,#498402,.T.); +#498400 = VERTEX_POINT('',#498401); +#498401 = CARTESIAN_POINT('',(132.253,-119.685,-5.E-02)); +#498402 = LINE('',#498403,#498404); +#498403 = CARTESIAN_POINT('',(132.252743,-119.916581,-5.E-02)); +#498404 = VECTOR('',#498405,1.); +#498405 = DIRECTION('',(1.109762207259E-03,0.999999384214,0.)); +#498406 = ORIENTED_EDGE('',*,*,#498407,.T.); +#498407 = EDGE_CURVE('',#498400,#498318,#498408,.T.); +#498408 = LINE('',#498409,#498410); +#498409 = CARTESIAN_POINT('',(132.253,-119.685,-5.E-02)); +#498410 = VECTOR('',#498411,1.); +#498411 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#498412 = FACE_BOUND('',#498413,.T.); +#498413 = EDGE_LOOP('',(#498414,#498424,#498432,#498440,#498448,#498456, + #498464,#498472,#498480,#498488,#498496,#498504)); +#498414 = ORIENTED_EDGE('',*,*,#498415,.T.); +#498415 = EDGE_CURVE('',#498416,#498418,#498420,.T.); +#498416 = VERTEX_POINT('',#498417); +#498417 = CARTESIAN_POINT('',(134.334536,-119.657464,-5.E-02)); +#498418 = VERTEX_POINT('',#498419); +#498419 = CARTESIAN_POINT('',(134.306581,-119.645257,-5.E-02)); +#498420 = LINE('',#498421,#498422); +#498421 = CARTESIAN_POINT('',(134.334536,-119.657464,-5.E-02)); +#498422 = VECTOR('',#498423,1.); +#498423 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#498424 = ORIENTED_EDGE('',*,*,#498425,.T.); +#498425 = EDGE_CURVE('',#498418,#498426,#498428,.T.); +#498426 = VERTEX_POINT('',#498427); +#498427 = CARTESIAN_POINT('',(133.795,-119.645,-5.E-02)); +#498428 = LINE('',#498429,#498430); +#498429 = CARTESIAN_POINT('',(134.306581,-119.645257,-5.E-02)); +#498430 = VECTOR('',#498431,1.); +#498431 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#498432 = ORIENTED_EDGE('',*,*,#498433,.T.); +#498433 = EDGE_CURVE('',#498426,#498434,#498436,.T.); +#498434 = VERTEX_POINT('',#498435); +#498435 = CARTESIAN_POINT('',(133.769464,-119.654464,-5.E-02)); +#498436 = LINE('',#498437,#498438); +#498437 = CARTESIAN_POINT('',(133.795,-119.645,-5.E-02)); +#498438 = VECTOR('',#498439,1.); +#498439 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498440 = ORIENTED_EDGE('',*,*,#498441,.T.); +#498441 = EDGE_CURVE('',#498434,#498442,#498444,.T.); +#498442 = VERTEX_POINT('',#498443); +#498443 = CARTESIAN_POINT('',(133.747257,-119.683419,-5.E-02)); +#498444 = LINE('',#498445,#498446); +#498445 = CARTESIAN_POINT('',(133.769464,-119.654464,-5.E-02)); +#498446 = VECTOR('',#498447,1.); +#498447 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498448 = ORIENTED_EDGE('',*,*,#498449,.T.); +#498449 = EDGE_CURVE('',#498442,#498450,#498452,.T.); +#498450 = VERTEX_POINT('',#498451); +#498451 = CARTESIAN_POINT('',(133.745,-119.905,-5.E-02)); +#498452 = LINE('',#498453,#498454); +#498453 = CARTESIAN_POINT('',(133.747257,-119.683419,-5.E-02)); +#498454 = VECTOR('',#498455,1.); +#498455 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498456 = ORIENTED_EDGE('',*,*,#498457,.T.); +#498457 = EDGE_CURVE('',#498450,#498458,#498460,.T.); +#498458 = VERTEX_POINT('',#498459); +#498459 = CARTESIAN_POINT('',(133.754464,-119.930536,-5.E-02)); +#498460 = LINE('',#498461,#498462); +#498461 = CARTESIAN_POINT('',(133.745,-119.905,-5.E-02)); +#498462 = VECTOR('',#498463,1.); +#498463 = DIRECTION('',(0.347515265308,-0.937674325327,0.)); +#498464 = ORIENTED_EDGE('',*,*,#498465,.T.); +#498465 = EDGE_CURVE('',#498458,#498466,#498468,.T.); +#498466 = VERTEX_POINT('',#498467); +#498467 = CARTESIAN_POINT('',(133.783419,-119.952743,-5.E-02)); +#498468 = LINE('',#498469,#498470); +#498469 = CARTESIAN_POINT('',(133.754464,-119.930536,-5.E-02)); +#498470 = VECTOR('',#498471,1.); +#498471 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#498472 = ORIENTED_EDGE('',*,*,#498473,.T.); +#498473 = EDGE_CURVE('',#498466,#498474,#498476,.T.); +#498474 = VERTEX_POINT('',#498475); +#498475 = CARTESIAN_POINT('',(134.305,-119.955,-5.E-02)); +#498476 = LINE('',#498477,#498478); +#498477 = CARTESIAN_POINT('',(133.783419,-119.952743,-5.E-02)); +#498478 = VECTOR('',#498479,1.); +#498479 = DIRECTION('',(0.99999063768,-4.327187664511E-03,0.)); +#498480 = ORIENTED_EDGE('',*,*,#498481,.T.); +#498481 = EDGE_CURVE('',#498474,#498482,#498484,.T.); +#498482 = VERTEX_POINT('',#498483); +#498483 = CARTESIAN_POINT('',(134.330536,-119.945536,-5.E-02)); +#498484 = LINE('',#498485,#498486); +#498485 = CARTESIAN_POINT('',(134.305,-119.955,-5.E-02)); +#498486 = VECTOR('',#498487,1.); +#498487 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#498488 = ORIENTED_EDGE('',*,*,#498489,.T.); +#498489 = EDGE_CURVE('',#498482,#498490,#498492,.T.); +#498490 = VERTEX_POINT('',#498491); +#498491 = CARTESIAN_POINT('',(134.352743,-119.916581,-5.E-02)); +#498492 = LINE('',#498493,#498494); +#498493 = CARTESIAN_POINT('',(134.330536,-119.945536,-5.E-02)); +#498494 = VECTOR('',#498495,1.); +#498495 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#498496 = ORIENTED_EDGE('',*,*,#498497,.T.); +#498497 = EDGE_CURVE('',#498490,#498498,#498500,.T.); +#498498 = VERTEX_POINT('',#498499); +#498499 = CARTESIAN_POINT('',(134.353,-119.685,-5.E-02)); +#498500 = LINE('',#498501,#498502); +#498501 = CARTESIAN_POINT('',(134.352743,-119.916581,-5.E-02)); +#498502 = VECTOR('',#498503,1.); +#498503 = DIRECTION('',(1.109762207382E-03,0.999999384214,0.)); +#498504 = ORIENTED_EDGE('',*,*,#498505,.T.); +#498505 = EDGE_CURVE('',#498498,#498416,#498506,.T.); +#498506 = LINE('',#498507,#498508); +#498507 = CARTESIAN_POINT('',(134.353,-119.685,-5.E-02)); +#498508 = VECTOR('',#498509,1.); +#498509 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#498510 = FACE_BOUND('',#498511,.T.); +#498511 = EDGE_LOOP('',(#498512,#498523,#498531,#498540,#498548,#498557, + #498565,#498574)); +#498512 = ORIENTED_EDGE('',*,*,#498513,.T.); +#498513 = EDGE_CURVE('',#498514,#498516,#498518,.T.); +#498514 = VERTEX_POINT('',#498515); +#498515 = CARTESIAN_POINT('',(133.504,-118.284,-5.E-02)); +#498516 = VERTEX_POINT('',#498517); +#498517 = CARTESIAN_POINT('',(133.405981,-118.195097,-5.E-02)); +#498518 = CIRCLE('',#498519,0.105082391372); +#498519 = AXIS2_PLACEMENT_3D('',#498520,#498521,#498522); +#498520 = CARTESIAN_POINT('',(133.4001455002,-118.3000172359,-5.E-02)); +#498521 = DIRECTION('',(0.,0.,1.)); +#498522 = DIRECTION('',(0.988314963529,0.152425499394,-0.)); +#498523 = ORIENTED_EDGE('',*,*,#498524,.T.); +#498524 = EDGE_CURVE('',#498516,#498525,#498527,.T.); +#498525 = VERTEX_POINT('',#498526); +#498526 = CARTESIAN_POINT('',(132.594019,-118.195097,-5.E-02)); +#498527 = LINE('',#498528,#498529); +#498528 = CARTESIAN_POINT('',(133.405981,-118.195097,-5.E-02)); +#498529 = VECTOR('',#498530,1.); +#498530 = DIRECTION('',(-1.,0.,0.)); +#498531 = ORIENTED_EDGE('',*,*,#498532,.T.); +#498532 = EDGE_CURVE('',#498525,#498533,#498535,.T.); +#498533 = VERTEX_POINT('',#498534); +#498534 = CARTESIAN_POINT('',(132.496097,-118.283019,-5.E-02)); +#498535 = CIRCLE('',#498536,0.104564909666); +#498536 = AXIS2_PLACEMENT_3D('',#498537,#498538,#498539); +#498537 = CARTESIAN_POINT('',(132.59935077965,-118.299525887,-5.E-02)); +#498538 = DIRECTION('',(0.,0.,1.)); +#498539 = DIRECTION('',(-5.099014255426E-02,0.998699156584,0.)); +#498540 = ORIENTED_EDGE('',*,*,#498541,.T.); +#498541 = EDGE_CURVE('',#498533,#498542,#498544,.T.); +#498542 = VERTEX_POINT('',#498543); +#498543 = CARTESIAN_POINT('',(132.495097,-119.705981,-5.E-02)); +#498544 = LINE('',#498545,#498546); +#498545 = CARTESIAN_POINT('',(132.496097,-118.283019,-5.E-02)); +#498546 = VECTOR('',#498547,1.); +#498547 = DIRECTION('',(-7.027592817443E-04,-0.999999753065,0.)); +#498548 = ORIENTED_EDGE('',*,*,#498549,.T.); +#498549 = EDGE_CURVE('',#498542,#498550,#498552,.T.); +#498550 = VERTEX_POINT('',#498551); +#498551 = CARTESIAN_POINT('',(132.583019,-119.803903,-5.E-02)); +#498552 = CIRCLE('',#498553,0.104564909666); +#498553 = AXIS2_PLACEMENT_3D('',#498554,#498555,#498556); +#498554 = CARTESIAN_POINT('',(132.59952588709,-119.7006492203,-5.E-02)); +#498555 = DIRECTION('',(0.,0.,1.)); +#498556 = DIRECTION('',(-0.998699156584,-5.099014255413E-02,0.)); +#498557 = ORIENTED_EDGE('',*,*,#498558,.T.); +#498558 = EDGE_CURVE('',#498550,#498559,#498561,.T.); +#498559 = VERTEX_POINT('',#498560); +#498560 = CARTESIAN_POINT('',(133.405981,-119.804903,-5.E-02)); +#498561 = LINE('',#498562,#498563); +#498562 = CARTESIAN_POINT('',(132.583019,-119.803903,-5.E-02)); +#498563 = VECTOR('',#498564,1.); +#498564 = DIRECTION('',(0.999999261739,-1.215122036898E-03,0.)); +#498565 = ORIENTED_EDGE('',*,*,#498566,.T.); +#498566 = EDGE_CURVE('',#498559,#498567,#498569,.T.); +#498567 = VERTEX_POINT('',#498568); +#498568 = CARTESIAN_POINT('',(133.503903,-119.716981,-5.E-02)); +#498569 = CIRCLE('',#498570,0.104564909666); +#498570 = AXIS2_PLACEMENT_3D('',#498571,#498572,#498573); +#498571 = CARTESIAN_POINT('',(133.40064922035,-119.7004741129,-5.E-02)); +#498572 = DIRECTION('',(0.,0.,1.)); +#498573 = DIRECTION('',(5.099014255426E-02,-0.998699156584,0.)); +#498574 = ORIENTED_EDGE('',*,*,#498575,.T.); +#498575 = EDGE_CURVE('',#498567,#498514,#498576,.T.); +#498576 = LINE('',#498577,#498578); +#498577 = CARTESIAN_POINT('',(133.503903,-119.716981,-5.E-02)); +#498578 = VECTOR('',#498579,1.); +#498579 = DIRECTION('',(6.769105784392E-05,0.999999997709,0.)); +#498580 = FACE_BOUND('',#498581,.T.); +#498581 = EDGE_LOOP('',(#498582,#498592,#498600,#498608,#498616,#498624, + #498632,#498640,#498648,#498656,#498664,#498672)); +#498582 = ORIENTED_EDGE('',*,*,#498583,.T.); +#498583 = EDGE_CURVE('',#498584,#498586,#498588,.T.); +#498584 = VERTEX_POINT('',#498585); +#498585 = CARTESIAN_POINT('',(132.234536,-119.257464,-5.E-02)); +#498586 = VERTEX_POINT('',#498587); +#498587 = CARTESIAN_POINT('',(132.206581,-119.245257,-5.E-02)); +#498588 = LINE('',#498589,#498590); +#498589 = CARTESIAN_POINT('',(132.234536,-119.257464,-5.E-02)); +#498590 = VECTOR('',#498591,1.); +#498591 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#498592 = ORIENTED_EDGE('',*,*,#498593,.T.); +#498593 = EDGE_CURVE('',#498586,#498594,#498596,.T.); +#498594 = VERTEX_POINT('',#498595); +#498595 = CARTESIAN_POINT('',(131.695,-119.245,-5.E-02)); +#498596 = LINE('',#498597,#498598); +#498597 = CARTESIAN_POINT('',(132.206581,-119.245257,-5.E-02)); +#498598 = VECTOR('',#498599,1.); +#498599 = DIRECTION('',(-0.999999873815,5.023641760759E-04,0.)); +#498600 = ORIENTED_EDGE('',*,*,#498601,.T.); +#498601 = EDGE_CURVE('',#498594,#498602,#498604,.T.); +#498602 = VERTEX_POINT('',#498603); +#498603 = CARTESIAN_POINT('',(131.669464,-119.254464,-5.E-02)); +#498604 = LINE('',#498605,#498606); +#498605 = CARTESIAN_POINT('',(131.695,-119.245,-5.E-02)); +#498606 = VECTOR('',#498607,1.); +#498607 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498608 = ORIENTED_EDGE('',*,*,#498609,.T.); +#498609 = EDGE_CURVE('',#498602,#498610,#498612,.T.); +#498610 = VERTEX_POINT('',#498611); +#498611 = CARTESIAN_POINT('',(131.647257,-119.283419,-5.E-02)); +#498612 = LINE('',#498613,#498614); +#498613 = CARTESIAN_POINT('',(131.669464,-119.254464,-5.E-02)); +#498614 = VECTOR('',#498615,1.); +#498615 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498616 = ORIENTED_EDGE('',*,*,#498617,.T.); +#498617 = EDGE_CURVE('',#498610,#498618,#498620,.T.); +#498618 = VERTEX_POINT('',#498619); +#498619 = CARTESIAN_POINT('',(131.645,-119.505,-5.E-02)); +#498620 = LINE('',#498621,#498622); +#498621 = CARTESIAN_POINT('',(131.647257,-119.283419,-5.E-02)); +#498622 = VECTOR('',#498623,1.); +#498623 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498624 = ORIENTED_EDGE('',*,*,#498625,.T.); +#498625 = EDGE_CURVE('',#498618,#498626,#498628,.T.); +#498626 = VERTEX_POINT('',#498627); +#498627 = CARTESIAN_POINT('',(131.654464,-119.530536,-5.E-02)); +#498628 = LINE('',#498629,#498630); +#498629 = CARTESIAN_POINT('',(131.645,-119.505,-5.E-02)); +#498630 = VECTOR('',#498631,1.); +#498631 = DIRECTION('',(0.347515265307,-0.937674325328,0.)); +#498632 = ORIENTED_EDGE('',*,*,#498633,.T.); +#498633 = EDGE_CURVE('',#498626,#498634,#498636,.T.); +#498634 = VERTEX_POINT('',#498635); +#498635 = CARTESIAN_POINT('',(131.683419,-119.552743,-5.E-02)); +#498636 = LINE('',#498637,#498638); +#498637 = CARTESIAN_POINT('',(131.654464,-119.530536,-5.E-02)); +#498638 = VECTOR('',#498639,1.); +#498639 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#498640 = ORIENTED_EDGE('',*,*,#498641,.T.); +#498641 = EDGE_CURVE('',#498634,#498642,#498644,.T.); +#498642 = VERTEX_POINT('',#498643); +#498643 = CARTESIAN_POINT('',(132.205,-119.555,-5.E-02)); +#498644 = LINE('',#498645,#498646); +#498645 = CARTESIAN_POINT('',(131.683419,-119.552743,-5.E-02)); +#498646 = VECTOR('',#498647,1.); +#498647 = DIRECTION('',(0.99999063768,-4.32718766451E-03,0.)); +#498648 = ORIENTED_EDGE('',*,*,#498649,.T.); +#498649 = EDGE_CURVE('',#498642,#498650,#498652,.T.); +#498650 = VERTEX_POINT('',#498651); +#498651 = CARTESIAN_POINT('',(132.230536,-119.545536,-5.E-02)); +#498652 = LINE('',#498653,#498654); +#498653 = CARTESIAN_POINT('',(132.205,-119.555,-5.E-02)); +#498654 = VECTOR('',#498655,1.); +#498655 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#498656 = ORIENTED_EDGE('',*,*,#498657,.T.); +#498657 = EDGE_CURVE('',#498650,#498658,#498660,.T.); +#498658 = VERTEX_POINT('',#498659); +#498659 = CARTESIAN_POINT('',(132.252743,-119.516581,-5.E-02)); +#498660 = LINE('',#498661,#498662); +#498661 = CARTESIAN_POINT('',(132.230536,-119.545536,-5.E-02)); +#498662 = VECTOR('',#498663,1.); +#498663 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#498664 = ORIENTED_EDGE('',*,*,#498665,.T.); +#498665 = EDGE_CURVE('',#498658,#498666,#498668,.T.); +#498666 = VERTEX_POINT('',#498667); +#498667 = CARTESIAN_POINT('',(132.253,-119.285,-5.E-02)); +#498668 = LINE('',#498669,#498670); +#498669 = CARTESIAN_POINT('',(132.252743,-119.516581,-5.E-02)); +#498670 = VECTOR('',#498671,1.); +#498671 = DIRECTION('',(1.109762207259E-03,0.999999384214,0.)); +#498672 = ORIENTED_EDGE('',*,*,#498673,.T.); +#498673 = EDGE_CURVE('',#498666,#498584,#498674,.T.); +#498674 = LINE('',#498675,#498676); +#498675 = CARTESIAN_POINT('',(132.253,-119.285,-5.E-02)); +#498676 = VECTOR('',#498677,1.); +#498677 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#498678 = FACE_BOUND('',#498679,.T.); +#498679 = EDGE_LOOP('',(#498680,#498690,#498698,#498706,#498714,#498722, + #498730,#498738,#498746,#498754,#498762,#498770)); +#498680 = ORIENTED_EDGE('',*,*,#498681,.T.); +#498681 = EDGE_CURVE('',#498682,#498684,#498686,.T.); +#498682 = VERTEX_POINT('',#498683); +#498683 = CARTESIAN_POINT('',(134.334536,-119.257464,-5.E-02)); +#498684 = VERTEX_POINT('',#498685); +#498685 = CARTESIAN_POINT('',(134.306581,-119.245257,-5.E-02)); +#498686 = LINE('',#498687,#498688); +#498687 = CARTESIAN_POINT('',(134.334536,-119.257464,-5.E-02)); +#498688 = VECTOR('',#498689,1.); +#498689 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#498690 = ORIENTED_EDGE('',*,*,#498691,.T.); +#498691 = EDGE_CURVE('',#498684,#498692,#498694,.T.); +#498692 = VERTEX_POINT('',#498693); +#498693 = CARTESIAN_POINT('',(133.795,-119.245,-5.E-02)); +#498694 = LINE('',#498695,#498696); +#498695 = CARTESIAN_POINT('',(134.306581,-119.245257,-5.E-02)); +#498696 = VECTOR('',#498697,1.); +#498697 = DIRECTION('',(-0.999999873815,5.023641760759E-04,0.)); +#498698 = ORIENTED_EDGE('',*,*,#498699,.T.); +#498699 = EDGE_CURVE('',#498692,#498700,#498702,.T.); +#498700 = VERTEX_POINT('',#498701); +#498701 = CARTESIAN_POINT('',(133.769464,-119.254464,-5.E-02)); +#498702 = LINE('',#498703,#498704); +#498703 = CARTESIAN_POINT('',(133.795,-119.245,-5.E-02)); +#498704 = VECTOR('',#498705,1.); +#498705 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498706 = ORIENTED_EDGE('',*,*,#498707,.T.); +#498707 = EDGE_CURVE('',#498700,#498708,#498710,.T.); +#498708 = VERTEX_POINT('',#498709); +#498709 = CARTESIAN_POINT('',(133.747257,-119.283419,-5.E-02)); +#498710 = LINE('',#498711,#498712); +#498711 = CARTESIAN_POINT('',(133.769464,-119.254464,-5.E-02)); +#498712 = VECTOR('',#498713,1.); +#498713 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498714 = ORIENTED_EDGE('',*,*,#498715,.T.); +#498715 = EDGE_CURVE('',#498708,#498716,#498718,.T.); +#498716 = VERTEX_POINT('',#498717); +#498717 = CARTESIAN_POINT('',(133.745,-119.505,-5.E-02)); +#498718 = LINE('',#498719,#498720); +#498719 = CARTESIAN_POINT('',(133.747257,-119.283419,-5.E-02)); +#498720 = VECTOR('',#498721,1.); +#498721 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498722 = ORIENTED_EDGE('',*,*,#498723,.T.); +#498723 = EDGE_CURVE('',#498716,#498724,#498726,.T.); +#498724 = VERTEX_POINT('',#498725); +#498725 = CARTESIAN_POINT('',(133.754464,-119.530536,-5.E-02)); +#498726 = LINE('',#498727,#498728); +#498727 = CARTESIAN_POINT('',(133.745,-119.505,-5.E-02)); +#498728 = VECTOR('',#498729,1.); +#498729 = DIRECTION('',(0.347515265308,-0.937674325327,0.)); +#498730 = ORIENTED_EDGE('',*,*,#498731,.T.); +#498731 = EDGE_CURVE('',#498724,#498732,#498734,.T.); +#498732 = VERTEX_POINT('',#498733); +#498733 = CARTESIAN_POINT('',(133.783419,-119.552743,-5.E-02)); +#498734 = LINE('',#498735,#498736); +#498735 = CARTESIAN_POINT('',(133.754464,-119.530536,-5.E-02)); +#498736 = VECTOR('',#498737,1.); +#498737 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#498738 = ORIENTED_EDGE('',*,*,#498739,.T.); +#498739 = EDGE_CURVE('',#498732,#498740,#498742,.T.); +#498740 = VERTEX_POINT('',#498741); +#498741 = CARTESIAN_POINT('',(134.305,-119.555,-5.E-02)); +#498742 = LINE('',#498743,#498744); +#498743 = CARTESIAN_POINT('',(133.783419,-119.552743,-5.E-02)); +#498744 = VECTOR('',#498745,1.); +#498745 = DIRECTION('',(0.99999063768,-4.327187664511E-03,0.)); +#498746 = ORIENTED_EDGE('',*,*,#498747,.T.); +#498747 = EDGE_CURVE('',#498740,#498748,#498750,.T.); +#498748 = VERTEX_POINT('',#498749); +#498749 = CARTESIAN_POINT('',(134.330536,-119.545536,-5.E-02)); +#498750 = LINE('',#498751,#498752); +#498751 = CARTESIAN_POINT('',(134.305,-119.555,-5.E-02)); +#498752 = VECTOR('',#498753,1.); +#498753 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#498754 = ORIENTED_EDGE('',*,*,#498755,.T.); +#498755 = EDGE_CURVE('',#498748,#498756,#498758,.T.); +#498756 = VERTEX_POINT('',#498757); +#498757 = CARTESIAN_POINT('',(134.352743,-119.516581,-5.E-02)); +#498758 = LINE('',#498759,#498760); +#498759 = CARTESIAN_POINT('',(134.330536,-119.545536,-5.E-02)); +#498760 = VECTOR('',#498761,1.); +#498761 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#498762 = ORIENTED_EDGE('',*,*,#498763,.T.); +#498763 = EDGE_CURVE('',#498756,#498764,#498766,.T.); +#498764 = VERTEX_POINT('',#498765); +#498765 = CARTESIAN_POINT('',(134.353,-119.285,-5.E-02)); +#498766 = LINE('',#498767,#498768); +#498767 = CARTESIAN_POINT('',(134.352743,-119.516581,-5.E-02)); +#498768 = VECTOR('',#498769,1.); +#498769 = DIRECTION('',(1.109762207382E-03,0.999999384214,0.)); +#498770 = ORIENTED_EDGE('',*,*,#498771,.T.); +#498771 = EDGE_CURVE('',#498764,#498682,#498772,.T.); +#498772 = LINE('',#498773,#498774); +#498773 = CARTESIAN_POINT('',(134.353,-119.285,-5.E-02)); +#498774 = VECTOR('',#498775,1.); +#498775 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#498776 = FACE_BOUND('',#498777,.T.); +#498777 = EDGE_LOOP('',(#498778,#498789,#498797,#498806,#498814,#498823, + #498831,#498840)); +#498778 = ORIENTED_EDGE('',*,*,#498779,.T.); +#498779 = EDGE_CURVE('',#498780,#498782,#498784,.T.); +#498780 = VERTEX_POINT('',#498781); +#498781 = CARTESIAN_POINT('',(130.31,-118.86,-5.E-02)); +#498782 = VERTEX_POINT('',#498783); +#498783 = CARTESIAN_POINT('',(130.17,-118.72,-5.E-02)); +#498784 = CIRCLE('',#498785,0.139999827125); +#498785 = AXIS2_PLACEMENT_3D('',#498786,#498787,#498788); +#498786 = CARTESIAN_POINT('',(130.17000017287,-118.8599998271,-5.E-02)); +#498787 = DIRECTION('',(0.,0.,1.)); +#498788 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#498789 = ORIENTED_EDGE('',*,*,#498790,.T.); +#498790 = EDGE_CURVE('',#498782,#498791,#498793,.T.); +#498791 = VERTEX_POINT('',#498792); +#498792 = CARTESIAN_POINT('',(129.83,-118.72,-5.E-02)); +#498793 = LINE('',#498794,#498795); +#498794 = CARTESIAN_POINT('',(130.17,-118.72,-5.E-02)); +#498795 = VECTOR('',#498796,1.); +#498796 = DIRECTION('',(-1.,0.,0.)); +#498797 = ORIENTED_EDGE('',*,*,#498798,.T.); +#498798 = EDGE_CURVE('',#498791,#498799,#498801,.T.); +#498799 = VERTEX_POINT('',#498800); +#498800 = CARTESIAN_POINT('',(129.69,-118.86,-5.E-02)); +#498801 = CIRCLE('',#498802,0.139999827125); +#498802 = AXIS2_PLACEMENT_3D('',#498803,#498804,#498805); +#498803 = CARTESIAN_POINT('',(129.82999982712,-118.8599998271,-5.E-02)); +#498804 = DIRECTION('',(0.,0.,1.)); +#498805 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#498806 = ORIENTED_EDGE('',*,*,#498807,.T.); +#498807 = EDGE_CURVE('',#498799,#498808,#498810,.T.); +#498808 = VERTEX_POINT('',#498809); +#498809 = CARTESIAN_POINT('',(129.69,-119.14,-5.E-02)); +#498810 = LINE('',#498811,#498812); +#498811 = CARTESIAN_POINT('',(129.69,-118.86,-5.E-02)); +#498812 = VECTOR('',#498813,1.); +#498813 = DIRECTION('',(0.,-1.,0.)); +#498814 = ORIENTED_EDGE('',*,*,#498815,.T.); +#498815 = EDGE_CURVE('',#498808,#498816,#498818,.T.); +#498816 = VERTEX_POINT('',#498817); +#498817 = CARTESIAN_POINT('',(129.83,-119.28,-5.E-02)); +#498818 = CIRCLE('',#498819,0.139999827125); +#498819 = AXIS2_PLACEMENT_3D('',#498820,#498821,#498822); +#498820 = CARTESIAN_POINT('',(129.82999982712,-119.1400001728,-5.E-02)); +#498821 = DIRECTION('',(0.,0.,1.)); +#498822 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#498823 = ORIENTED_EDGE('',*,*,#498824,.T.); +#498824 = EDGE_CURVE('',#498816,#498825,#498827,.T.); +#498825 = VERTEX_POINT('',#498826); +#498826 = CARTESIAN_POINT('',(130.17,-119.28,-5.E-02)); +#498827 = LINE('',#498828,#498829); +#498828 = CARTESIAN_POINT('',(129.83,-119.28,-5.E-02)); +#498829 = VECTOR('',#498830,1.); +#498830 = DIRECTION('',(1.,0.,0.)); +#498831 = ORIENTED_EDGE('',*,*,#498832,.T.); +#498832 = EDGE_CURVE('',#498825,#498833,#498835,.T.); +#498833 = VERTEX_POINT('',#498834); +#498834 = CARTESIAN_POINT('',(130.31,-119.14,-5.E-02)); +#498835 = CIRCLE('',#498836,0.139999827125); +#498836 = AXIS2_PLACEMENT_3D('',#498837,#498838,#498839); +#498837 = CARTESIAN_POINT('',(130.17000017287,-119.1400001728,-5.E-02)); +#498838 = DIRECTION('',(0.,0.,1.)); +#498839 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#498840 = ORIENTED_EDGE('',*,*,#498841,.T.); +#498841 = EDGE_CURVE('',#498833,#498780,#498842,.T.); +#498842 = LINE('',#498843,#498844); +#498843 = CARTESIAN_POINT('',(130.31,-119.14,-5.E-02)); +#498844 = VECTOR('',#498845,1.); +#498845 = DIRECTION('',(0.,1.,0.)); +#498846 = FACE_BOUND('',#498847,.T.); +#498847 = EDGE_LOOP('',(#498848,#498858,#498866,#498874,#498882,#498890, + #498898,#498906,#498914,#498922,#498930,#498938)); +#498848 = ORIENTED_EDGE('',*,*,#498849,.T.); +#498849 = EDGE_CURVE('',#498850,#498852,#498854,.T.); +#498850 = VERTEX_POINT('',#498851); +#498851 = CARTESIAN_POINT('',(132.234536,-118.857464,-5.E-02)); +#498852 = VERTEX_POINT('',#498853); +#498853 = CARTESIAN_POINT('',(132.206581,-118.845257,-5.E-02)); +#498854 = LINE('',#498855,#498856); +#498855 = CARTESIAN_POINT('',(132.234536,-118.857464,-5.E-02)); +#498856 = VECTOR('',#498857,1.); +#498857 = DIRECTION('',(-0.91643775094,0.400177271533,0.)); +#498858 = ORIENTED_EDGE('',*,*,#498859,.T.); +#498859 = EDGE_CURVE('',#498852,#498860,#498862,.T.); +#498860 = VERTEX_POINT('',#498861); +#498861 = CARTESIAN_POINT('',(131.695,-118.845,-5.E-02)); +#498862 = LINE('',#498863,#498864); +#498863 = CARTESIAN_POINT('',(132.206581,-118.845257,-5.E-02)); +#498864 = VECTOR('',#498865,1.); +#498865 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#498866 = ORIENTED_EDGE('',*,*,#498867,.T.); +#498867 = EDGE_CURVE('',#498860,#498868,#498870,.T.); +#498868 = VERTEX_POINT('',#498869); +#498869 = CARTESIAN_POINT('',(131.669464,-118.854464,-5.E-02)); +#498870 = LINE('',#498871,#498872); +#498871 = CARTESIAN_POINT('',(131.695,-118.845,-5.E-02)); +#498872 = VECTOR('',#498873,1.); +#498873 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498874 = ORIENTED_EDGE('',*,*,#498875,.T.); +#498875 = EDGE_CURVE('',#498868,#498876,#498878,.T.); +#498876 = VERTEX_POINT('',#498877); +#498877 = CARTESIAN_POINT('',(131.647257,-118.883419,-5.E-02)); +#498878 = LINE('',#498879,#498880); +#498879 = CARTESIAN_POINT('',(131.669464,-118.854464,-5.E-02)); +#498880 = VECTOR('',#498881,1.); +#498881 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498882 = ORIENTED_EDGE('',*,*,#498883,.T.); +#498883 = EDGE_CURVE('',#498876,#498884,#498886,.T.); +#498884 = VERTEX_POINT('',#498885); +#498885 = CARTESIAN_POINT('',(131.645,-119.105,-5.E-02)); +#498886 = LINE('',#498887,#498888); +#498887 = CARTESIAN_POINT('',(131.647257,-118.883419,-5.E-02)); +#498888 = VECTOR('',#498889,1.); +#498889 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498890 = ORIENTED_EDGE('',*,*,#498891,.T.); +#498891 = EDGE_CURVE('',#498884,#498892,#498894,.T.); +#498892 = VERTEX_POINT('',#498893); +#498893 = CARTESIAN_POINT('',(131.654464,-119.130536,-5.E-02)); +#498894 = LINE('',#498895,#498896); +#498895 = CARTESIAN_POINT('',(131.645,-119.105,-5.E-02)); +#498896 = VECTOR('',#498897,1.); +#498897 = DIRECTION('',(0.347515265307,-0.937674325328,0.)); +#498898 = ORIENTED_EDGE('',*,*,#498899,.T.); +#498899 = EDGE_CURVE('',#498892,#498900,#498902,.T.); +#498900 = VERTEX_POINT('',#498901); +#498901 = CARTESIAN_POINT('',(131.683419,-119.152743,-5.E-02)); +#498902 = LINE('',#498903,#498904); +#498903 = CARTESIAN_POINT('',(131.654464,-119.130536,-5.E-02)); +#498904 = VECTOR('',#498905,1.); +#498905 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#498906 = ORIENTED_EDGE('',*,*,#498907,.T.); +#498907 = EDGE_CURVE('',#498900,#498908,#498910,.T.); +#498908 = VERTEX_POINT('',#498909); +#498909 = CARTESIAN_POINT('',(132.205,-119.155,-5.E-02)); +#498910 = LINE('',#498911,#498912); +#498911 = CARTESIAN_POINT('',(131.683419,-119.152743,-5.E-02)); +#498912 = VECTOR('',#498913,1.); +#498913 = DIRECTION('',(0.99999063768,-4.32718766451E-03,0.)); +#498914 = ORIENTED_EDGE('',*,*,#498915,.T.); +#498915 = EDGE_CURVE('',#498908,#498916,#498918,.T.); +#498916 = VERTEX_POINT('',#498917); +#498917 = CARTESIAN_POINT('',(132.230536,-119.145536,-5.E-02)); +#498918 = LINE('',#498919,#498920); +#498919 = CARTESIAN_POINT('',(132.205,-119.155,-5.E-02)); +#498920 = VECTOR('',#498921,1.); +#498921 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#498922 = ORIENTED_EDGE('',*,*,#498923,.T.); +#498923 = EDGE_CURVE('',#498916,#498924,#498926,.T.); +#498924 = VERTEX_POINT('',#498925); +#498925 = CARTESIAN_POINT('',(132.252743,-119.116581,-5.E-02)); +#498926 = LINE('',#498927,#498928); +#498927 = CARTESIAN_POINT('',(132.230536,-119.145536,-5.E-02)); +#498928 = VECTOR('',#498929,1.); +#498929 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#498930 = ORIENTED_EDGE('',*,*,#498931,.T.); +#498931 = EDGE_CURVE('',#498924,#498932,#498934,.T.); +#498932 = VERTEX_POINT('',#498933); +#498933 = CARTESIAN_POINT('',(132.253,-118.885,-5.E-02)); +#498934 = LINE('',#498935,#498936); +#498935 = CARTESIAN_POINT('',(132.252743,-119.116581,-5.E-02)); +#498936 = VECTOR('',#498937,1.); +#498937 = DIRECTION('',(1.109762207259E-03,0.999999384214,0.)); +#498938 = ORIENTED_EDGE('',*,*,#498939,.T.); +#498939 = EDGE_CURVE('',#498932,#498850,#498940,.T.); +#498940 = LINE('',#498941,#498942); +#498941 = CARTESIAN_POINT('',(132.253,-118.885,-5.E-02)); +#498942 = VECTOR('',#498943,1.); +#498943 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#498944 = FACE_BOUND('',#498945,.T.); +#498945 = EDGE_LOOP('',(#498946,#498956,#498964,#498972,#498980,#498988, + #498996,#499004,#499012,#499020,#499028,#499036)); +#498946 = ORIENTED_EDGE('',*,*,#498947,.T.); +#498947 = EDGE_CURVE('',#498948,#498950,#498952,.T.); +#498948 = VERTEX_POINT('',#498949); +#498949 = CARTESIAN_POINT('',(134.334536,-118.857464,-5.E-02)); +#498950 = VERTEX_POINT('',#498951); +#498951 = CARTESIAN_POINT('',(134.306581,-118.845257,-5.E-02)); +#498952 = LINE('',#498953,#498954); +#498953 = CARTESIAN_POINT('',(134.334536,-118.857464,-5.E-02)); +#498954 = VECTOR('',#498955,1.); +#498955 = DIRECTION('',(-0.91643775094,0.400177271533,0.)); +#498956 = ORIENTED_EDGE('',*,*,#498957,.T.); +#498957 = EDGE_CURVE('',#498950,#498958,#498960,.T.); +#498958 = VERTEX_POINT('',#498959); +#498959 = CARTESIAN_POINT('',(133.795,-118.845,-5.E-02)); +#498960 = LINE('',#498961,#498962); +#498961 = CARTESIAN_POINT('',(134.306581,-118.845257,-5.E-02)); +#498962 = VECTOR('',#498963,1.); +#498963 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#498964 = ORIENTED_EDGE('',*,*,#498965,.T.); +#498965 = EDGE_CURVE('',#498958,#498966,#498968,.T.); +#498966 = VERTEX_POINT('',#498967); +#498967 = CARTESIAN_POINT('',(133.769464,-118.854464,-5.E-02)); +#498968 = LINE('',#498969,#498970); +#498969 = CARTESIAN_POINT('',(133.795,-118.845,-5.E-02)); +#498970 = VECTOR('',#498971,1.); +#498971 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#498972 = ORIENTED_EDGE('',*,*,#498973,.T.); +#498973 = EDGE_CURVE('',#498966,#498974,#498976,.T.); +#498974 = VERTEX_POINT('',#498975); +#498975 = CARTESIAN_POINT('',(133.747257,-118.883419,-5.E-02)); +#498976 = LINE('',#498977,#498978); +#498977 = CARTESIAN_POINT('',(133.769464,-118.854464,-5.E-02)); +#498978 = VECTOR('',#498979,1.); +#498979 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#498980 = ORIENTED_EDGE('',*,*,#498981,.T.); +#498981 = EDGE_CURVE('',#498974,#498982,#498984,.T.); +#498982 = VERTEX_POINT('',#498983); +#498983 = CARTESIAN_POINT('',(133.745,-119.105,-5.E-02)); +#498984 = LINE('',#498985,#498986); +#498985 = CARTESIAN_POINT('',(133.747257,-118.883419,-5.E-02)); +#498986 = VECTOR('',#498987,1.); +#498987 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#498988 = ORIENTED_EDGE('',*,*,#498989,.T.); +#498989 = EDGE_CURVE('',#498982,#498990,#498992,.T.); +#498990 = VERTEX_POINT('',#498991); +#498991 = CARTESIAN_POINT('',(133.754464,-119.130536,-5.E-02)); +#498992 = LINE('',#498993,#498994); +#498993 = CARTESIAN_POINT('',(133.745,-119.105,-5.E-02)); +#498994 = VECTOR('',#498995,1.); +#498995 = DIRECTION('',(0.347515265308,-0.937674325327,0.)); +#498996 = ORIENTED_EDGE('',*,*,#498997,.T.); +#498997 = EDGE_CURVE('',#498990,#498998,#499000,.T.); +#498998 = VERTEX_POINT('',#498999); +#498999 = CARTESIAN_POINT('',(133.783419,-119.152743,-5.E-02)); +#499000 = LINE('',#499001,#499002); +#499001 = CARTESIAN_POINT('',(133.754464,-119.130536,-5.E-02)); +#499002 = VECTOR('',#499003,1.); +#499003 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#499004 = ORIENTED_EDGE('',*,*,#499005,.T.); +#499005 = EDGE_CURVE('',#498998,#499006,#499008,.T.); +#499006 = VERTEX_POINT('',#499007); +#499007 = CARTESIAN_POINT('',(134.305,-119.155,-5.E-02)); +#499008 = LINE('',#499009,#499010); +#499009 = CARTESIAN_POINT('',(133.783419,-119.152743,-5.E-02)); +#499010 = VECTOR('',#499011,1.); +#499011 = DIRECTION('',(0.99999063768,-4.327187664511E-03,0.)); +#499012 = ORIENTED_EDGE('',*,*,#499013,.T.); +#499013 = EDGE_CURVE('',#499006,#499014,#499016,.T.); +#499014 = VERTEX_POINT('',#499015); +#499015 = CARTESIAN_POINT('',(134.330536,-119.145536,-5.E-02)); +#499016 = LINE('',#499017,#499018); +#499017 = CARTESIAN_POINT('',(134.305,-119.155,-5.E-02)); +#499018 = VECTOR('',#499019,1.); +#499019 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#499020 = ORIENTED_EDGE('',*,*,#499021,.T.); +#499021 = EDGE_CURVE('',#499014,#499022,#499024,.T.); +#499022 = VERTEX_POINT('',#499023); +#499023 = CARTESIAN_POINT('',(134.352743,-119.116581,-5.E-02)); +#499024 = LINE('',#499025,#499026); +#499025 = CARTESIAN_POINT('',(134.330536,-119.145536,-5.E-02)); +#499026 = VECTOR('',#499027,1.); +#499027 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#499028 = ORIENTED_EDGE('',*,*,#499029,.T.); +#499029 = EDGE_CURVE('',#499022,#499030,#499032,.T.); +#499030 = VERTEX_POINT('',#499031); +#499031 = CARTESIAN_POINT('',(134.353,-118.885,-5.E-02)); +#499032 = LINE('',#499033,#499034); +#499033 = CARTESIAN_POINT('',(134.352743,-119.116581,-5.E-02)); +#499034 = VECTOR('',#499035,1.); +#499035 = DIRECTION('',(1.109762207382E-03,0.999999384214,0.)); +#499036 = ORIENTED_EDGE('',*,*,#499037,.T.); +#499037 = EDGE_CURVE('',#499030,#498948,#499038,.T.); +#499038 = LINE('',#499039,#499040); +#499039 = CARTESIAN_POINT('',(134.353,-118.885,-5.E-02)); +#499040 = VECTOR('',#499041,1.); +#499041 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#499042 = FACE_BOUND('',#499043,.T.); +#499043 = EDGE_LOOP('',(#499044,#499055,#499063,#499072,#499080,#499089, + #499097,#499106)); +#499044 = ORIENTED_EDGE('',*,*,#499045,.T.); +#499045 = EDGE_CURVE('',#499046,#499048,#499050,.T.); +#499046 = VERTEX_POINT('',#499047); +#499047 = CARTESIAN_POINT('',(144.6,-118.125,-5.E-02)); +#499048 = VERTEX_POINT('',#499049); +#499049 = CARTESIAN_POINT('',(144.375,-117.9,-5.E-02)); +#499050 = CIRCLE('',#499051,0.225000087974); +#499051 = AXIS2_PLACEMENT_3D('',#499052,#499053,#499054); +#499052 = CARTESIAN_POINT('',(144.37499991202,-118.1250000879,-5.E-02)); +#499053 = DIRECTION('',(0.,0.,1.)); +#499054 = DIRECTION('',(1.,3.909953458166E-07,-0.)); +#499055 = ORIENTED_EDGE('',*,*,#499056,.T.); +#499056 = EDGE_CURVE('',#499048,#499057,#499059,.T.); +#499057 = VERTEX_POINT('',#499058); +#499058 = CARTESIAN_POINT('',(143.625,-117.9,-5.E-02)); +#499059 = LINE('',#499060,#499061); +#499060 = CARTESIAN_POINT('',(144.375,-117.9,-5.E-02)); +#499061 = VECTOR('',#499062,1.); +#499062 = DIRECTION('',(-1.,0.,0.)); +#499063 = ORIENTED_EDGE('',*,*,#499064,.T.); +#499064 = EDGE_CURVE('',#499057,#499065,#499067,.T.); +#499065 = VERTEX_POINT('',#499066); +#499066 = CARTESIAN_POINT('',(143.4,-118.125,-5.E-02)); +#499067 = CIRCLE('',#499068,0.225000087974); +#499068 = AXIS2_PLACEMENT_3D('',#499069,#499070,#499071); +#499069 = CARTESIAN_POINT('',(143.62500008797,-118.1250000879,-5.E-02)); +#499070 = DIRECTION('',(0.,0.,1.)); +#499071 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#499072 = ORIENTED_EDGE('',*,*,#499073,.T.); +#499073 = EDGE_CURVE('',#499065,#499074,#499076,.T.); +#499074 = VERTEX_POINT('',#499075); +#499075 = CARTESIAN_POINT('',(143.4,-118.575,-5.E-02)); +#499076 = LINE('',#499077,#499078); +#499077 = CARTESIAN_POINT('',(143.4,-118.125,-5.E-02)); +#499078 = VECTOR('',#499079,1.); +#499079 = DIRECTION('',(0.,-1.,0.)); +#499080 = ORIENTED_EDGE('',*,*,#499081,.T.); +#499081 = EDGE_CURVE('',#499074,#499082,#499084,.T.); +#499082 = VERTEX_POINT('',#499083); +#499083 = CARTESIAN_POINT('',(143.625,-118.8,-5.E-02)); +#499084 = CIRCLE('',#499085,0.225000087974); +#499085 = AXIS2_PLACEMENT_3D('',#499086,#499087,#499088); +#499086 = CARTESIAN_POINT('',(143.62500008797,-118.574999912,-5.E-02)); +#499087 = DIRECTION('',(0.,0.,1.)); +#499088 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#499089 = ORIENTED_EDGE('',*,*,#499090,.T.); +#499090 = EDGE_CURVE('',#499082,#499091,#499093,.T.); +#499091 = VERTEX_POINT('',#499092); +#499092 = CARTESIAN_POINT('',(144.375,-118.8,-5.E-02)); +#499093 = LINE('',#499094,#499095); +#499094 = CARTESIAN_POINT('',(143.625,-118.8,-5.E-02)); +#499095 = VECTOR('',#499096,1.); +#499096 = DIRECTION('',(1.,0.,0.)); +#499097 = ORIENTED_EDGE('',*,*,#499098,.T.); +#499098 = EDGE_CURVE('',#499091,#499099,#499101,.T.); +#499099 = VERTEX_POINT('',#499100); +#499100 = CARTESIAN_POINT('',(144.6,-118.575,-5.E-02)); +#499101 = CIRCLE('',#499102,0.225000087974); +#499102 = AXIS2_PLACEMENT_3D('',#499103,#499104,#499105); +#499103 = CARTESIAN_POINT('',(144.37499991202,-118.574999912,-5.E-02)); +#499104 = DIRECTION('',(0.,0.,1.)); +#499105 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#499106 = ORIENTED_EDGE('',*,*,#499107,.T.); +#499107 = EDGE_CURVE('',#499099,#499046,#499108,.T.); +#499108 = LINE('',#499109,#499110); +#499109 = CARTESIAN_POINT('',(144.6,-118.575,-5.E-02)); +#499110 = VECTOR('',#499111,1.); +#499111 = DIRECTION('',(0.,1.,0.)); +#499112 = FACE_BOUND('',#499113,.T.); +#499113 = EDGE_LOOP('',(#499114,#499124,#499132,#499140,#499148,#499156, + #499164,#499172,#499180,#499188,#499196,#499204)); +#499114 = ORIENTED_EDGE('',*,*,#499115,.T.); +#499115 = EDGE_CURVE('',#499116,#499118,#499120,.T.); +#499116 = VERTEX_POINT('',#499117); +#499117 = CARTESIAN_POINT('',(132.234536,-118.457464,-5.E-02)); +#499118 = VERTEX_POINT('',#499119); +#499119 = CARTESIAN_POINT('',(132.206581,-118.445257,-5.E-02)); +#499120 = LINE('',#499121,#499122); +#499121 = CARTESIAN_POINT('',(132.234536,-118.457464,-5.E-02)); +#499122 = VECTOR('',#499123,1.); +#499123 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#499124 = ORIENTED_EDGE('',*,*,#499125,.T.); +#499125 = EDGE_CURVE('',#499118,#499126,#499128,.T.); +#499126 = VERTEX_POINT('',#499127); +#499127 = CARTESIAN_POINT('',(131.695,-118.445,-5.E-02)); +#499128 = LINE('',#499129,#499130); +#499129 = CARTESIAN_POINT('',(132.206581,-118.445257,-5.E-02)); +#499130 = VECTOR('',#499131,1.); +#499131 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#499132 = ORIENTED_EDGE('',*,*,#499133,.T.); +#499133 = EDGE_CURVE('',#499126,#499134,#499136,.T.); +#499134 = VERTEX_POINT('',#499135); +#499135 = CARTESIAN_POINT('',(131.669464,-118.454464,-5.E-02)); +#499136 = LINE('',#499137,#499138); +#499137 = CARTESIAN_POINT('',(131.695,-118.445,-5.E-02)); +#499138 = VECTOR('',#499139,1.); +#499139 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#499140 = ORIENTED_EDGE('',*,*,#499141,.T.); +#499141 = EDGE_CURVE('',#499134,#499142,#499144,.T.); +#499142 = VERTEX_POINT('',#499143); +#499143 = CARTESIAN_POINT('',(131.647257,-118.483419,-5.E-02)); +#499144 = LINE('',#499145,#499146); +#499145 = CARTESIAN_POINT('',(131.669464,-118.454464,-5.E-02)); +#499146 = VECTOR('',#499147,1.); +#499147 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#499148 = ORIENTED_EDGE('',*,*,#499149,.T.); +#499149 = EDGE_CURVE('',#499142,#499150,#499152,.T.); +#499150 = VERTEX_POINT('',#499151); +#499151 = CARTESIAN_POINT('',(131.645,-118.705,-5.E-02)); +#499152 = LINE('',#499153,#499154); +#499153 = CARTESIAN_POINT('',(131.647257,-118.483419,-5.E-02)); +#499154 = VECTOR('',#499155,1.); +#499155 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#499156 = ORIENTED_EDGE('',*,*,#499157,.T.); +#499157 = EDGE_CURVE('',#499150,#499158,#499160,.T.); +#499158 = VERTEX_POINT('',#499159); +#499159 = CARTESIAN_POINT('',(131.654464,-118.730536,-5.E-02)); +#499160 = LINE('',#499161,#499162); +#499161 = CARTESIAN_POINT('',(131.645,-118.705,-5.E-02)); +#499162 = VECTOR('',#499163,1.); +#499163 = DIRECTION('',(0.347515265307,-0.937674325328,0.)); +#499164 = ORIENTED_EDGE('',*,*,#499165,.T.); +#499165 = EDGE_CURVE('',#499158,#499166,#499168,.T.); +#499166 = VERTEX_POINT('',#499167); +#499167 = CARTESIAN_POINT('',(131.683419,-118.752743,-5.E-02)); +#499168 = LINE('',#499169,#499170); +#499169 = CARTESIAN_POINT('',(131.654464,-118.730536,-5.E-02)); +#499170 = VECTOR('',#499171,1.); +#499171 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#499172 = ORIENTED_EDGE('',*,*,#499173,.T.); +#499173 = EDGE_CURVE('',#499166,#499174,#499176,.T.); +#499174 = VERTEX_POINT('',#499175); +#499175 = CARTESIAN_POINT('',(132.205,-118.755,-5.E-02)); +#499176 = LINE('',#499177,#499178); +#499177 = CARTESIAN_POINT('',(131.683419,-118.752743,-5.E-02)); +#499178 = VECTOR('',#499179,1.); +#499179 = DIRECTION('',(0.99999063768,-4.32718766451E-03,0.)); +#499180 = ORIENTED_EDGE('',*,*,#499181,.T.); +#499181 = EDGE_CURVE('',#499174,#499182,#499184,.T.); +#499182 = VERTEX_POINT('',#499183); +#499183 = CARTESIAN_POINT('',(132.230536,-118.745536,-5.E-02)); +#499184 = LINE('',#499185,#499186); +#499185 = CARTESIAN_POINT('',(132.205,-118.755,-5.E-02)); +#499186 = VECTOR('',#499187,1.); +#499187 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#499188 = ORIENTED_EDGE('',*,*,#499189,.T.); +#499189 = EDGE_CURVE('',#499182,#499190,#499192,.T.); +#499190 = VERTEX_POINT('',#499191); +#499191 = CARTESIAN_POINT('',(132.252743,-118.716581,-5.E-02)); +#499192 = LINE('',#499193,#499194); +#499193 = CARTESIAN_POINT('',(132.230536,-118.745536,-5.E-02)); +#499194 = VECTOR('',#499195,1.); +#499195 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#499196 = ORIENTED_EDGE('',*,*,#499197,.T.); +#499197 = EDGE_CURVE('',#499190,#499198,#499200,.T.); +#499198 = VERTEX_POINT('',#499199); +#499199 = CARTESIAN_POINT('',(132.253,-118.485,-5.E-02)); +#499200 = LINE('',#499201,#499202); +#499201 = CARTESIAN_POINT('',(132.252743,-118.716581,-5.E-02)); +#499202 = VECTOR('',#499203,1.); +#499203 = DIRECTION('',(1.109762207259E-03,0.999999384214,0.)); +#499204 = ORIENTED_EDGE('',*,*,#499205,.T.); +#499205 = EDGE_CURVE('',#499198,#499116,#499206,.T.); +#499206 = LINE('',#499207,#499208); +#499207 = CARTESIAN_POINT('',(132.253,-118.485,-5.E-02)); +#499208 = VECTOR('',#499209,1.); +#499209 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#499210 = FACE_BOUND('',#499211,.T.); +#499211 = EDGE_LOOP('',(#499212,#499222,#499230,#499238,#499246,#499254, + #499262,#499270,#499278,#499286,#499294,#499302)); +#499212 = ORIENTED_EDGE('',*,*,#499213,.T.); +#499213 = EDGE_CURVE('',#499214,#499216,#499218,.T.); +#499214 = VERTEX_POINT('',#499215); +#499215 = CARTESIAN_POINT('',(134.334536,-118.457464,-5.E-02)); +#499216 = VERTEX_POINT('',#499217); +#499217 = CARTESIAN_POINT('',(134.306581,-118.445257,-5.E-02)); +#499218 = LINE('',#499219,#499220); +#499219 = CARTESIAN_POINT('',(134.334536,-118.457464,-5.E-02)); +#499220 = VECTOR('',#499221,1.); +#499221 = DIRECTION('',(-0.91643775094,0.400177271534,0.)); +#499222 = ORIENTED_EDGE('',*,*,#499223,.T.); +#499223 = EDGE_CURVE('',#499216,#499224,#499226,.T.); +#499224 = VERTEX_POINT('',#499225); +#499225 = CARTESIAN_POINT('',(133.795,-118.445,-5.E-02)); +#499226 = LINE('',#499227,#499228); +#499227 = CARTESIAN_POINT('',(134.306581,-118.445257,-5.E-02)); +#499228 = VECTOR('',#499229,1.); +#499229 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#499230 = ORIENTED_EDGE('',*,*,#499231,.T.); +#499231 = EDGE_CURVE('',#499224,#499232,#499234,.T.); +#499232 = VERTEX_POINT('',#499233); +#499233 = CARTESIAN_POINT('',(133.769464,-118.454464,-5.E-02)); +#499234 = LINE('',#499235,#499236); +#499235 = CARTESIAN_POINT('',(133.795,-118.445,-5.E-02)); +#499236 = VECTOR('',#499237,1.); +#499237 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#499238 = ORIENTED_EDGE('',*,*,#499239,.T.); +#499239 = EDGE_CURVE('',#499232,#499240,#499242,.T.); +#499240 = VERTEX_POINT('',#499241); +#499241 = CARTESIAN_POINT('',(133.747257,-118.483419,-5.E-02)); +#499242 = LINE('',#499243,#499244); +#499243 = CARTESIAN_POINT('',(133.769464,-118.454464,-5.E-02)); +#499244 = VECTOR('',#499245,1.); +#499245 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#499246 = ORIENTED_EDGE('',*,*,#499247,.T.); +#499247 = EDGE_CURVE('',#499240,#499248,#499250,.T.); +#499248 = VERTEX_POINT('',#499249); +#499249 = CARTESIAN_POINT('',(133.745,-118.705,-5.E-02)); +#499250 = LINE('',#499251,#499252); +#499251 = CARTESIAN_POINT('',(133.747257,-118.483419,-5.E-02)); +#499252 = VECTOR('',#499253,1.); +#499253 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#499254 = ORIENTED_EDGE('',*,*,#499255,.T.); +#499255 = EDGE_CURVE('',#499248,#499256,#499258,.T.); +#499256 = VERTEX_POINT('',#499257); +#499257 = CARTESIAN_POINT('',(133.754464,-118.730536,-5.E-02)); +#499258 = LINE('',#499259,#499260); +#499259 = CARTESIAN_POINT('',(133.745,-118.705,-5.E-02)); +#499260 = VECTOR('',#499261,1.); +#499261 = DIRECTION('',(0.347515265308,-0.937674325327,0.)); +#499262 = ORIENTED_EDGE('',*,*,#499263,.T.); +#499263 = EDGE_CURVE('',#499256,#499264,#499266,.T.); +#499264 = VERTEX_POINT('',#499265); +#499265 = CARTESIAN_POINT('',(133.783419,-118.752743,-5.E-02)); +#499266 = LINE('',#499267,#499268); +#499267 = CARTESIAN_POINT('',(133.754464,-118.730536,-5.E-02)); +#499268 = VECTOR('',#499269,1.); +#499269 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#499270 = ORIENTED_EDGE('',*,*,#499271,.T.); +#499271 = EDGE_CURVE('',#499264,#499272,#499274,.T.); +#499272 = VERTEX_POINT('',#499273); +#499273 = CARTESIAN_POINT('',(134.305,-118.755,-5.E-02)); +#499274 = LINE('',#499275,#499276); +#499275 = CARTESIAN_POINT('',(133.783419,-118.752743,-5.E-02)); +#499276 = VECTOR('',#499277,1.); +#499277 = DIRECTION('',(0.99999063768,-4.327187664511E-03,0.)); +#499278 = ORIENTED_EDGE('',*,*,#499279,.T.); +#499279 = EDGE_CURVE('',#499272,#499280,#499282,.T.); +#499280 = VERTEX_POINT('',#499281); +#499281 = CARTESIAN_POINT('',(134.330536,-118.745536,-5.E-02)); +#499282 = LINE('',#499283,#499284); +#499283 = CARTESIAN_POINT('',(134.305,-118.755,-5.E-02)); +#499284 = VECTOR('',#499285,1.); +#499285 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#499286 = ORIENTED_EDGE('',*,*,#499287,.T.); +#499287 = EDGE_CURVE('',#499280,#499288,#499290,.T.); +#499288 = VERTEX_POINT('',#499289); +#499289 = CARTESIAN_POINT('',(134.352743,-118.716581,-5.E-02)); +#499290 = LINE('',#499291,#499292); +#499291 = CARTESIAN_POINT('',(134.330536,-118.745536,-5.E-02)); +#499292 = VECTOR('',#499293,1.); +#499293 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#499294 = ORIENTED_EDGE('',*,*,#499295,.T.); +#499295 = EDGE_CURVE('',#499288,#499296,#499298,.T.); +#499296 = VERTEX_POINT('',#499297); +#499297 = CARTESIAN_POINT('',(134.353,-118.485,-5.E-02)); +#499298 = LINE('',#499299,#499300); +#499299 = CARTESIAN_POINT('',(134.352743,-118.716581,-5.E-02)); +#499300 = VECTOR('',#499301,1.); +#499301 = DIRECTION('',(1.109762207382E-03,0.999999384214,0.)); +#499302 = ORIENTED_EDGE('',*,*,#499303,.T.); +#499303 = EDGE_CURVE('',#499296,#499214,#499304,.T.); +#499304 = LINE('',#499305,#499306); +#499305 = CARTESIAN_POINT('',(134.353,-118.485,-5.E-02)); +#499306 = VECTOR('',#499307,1.); +#499307 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#499308 = FACE_BOUND('',#499309,.T.); +#499309 = EDGE_LOOP('',(#499310,#499321,#499329,#499338,#499346,#499355, + #499363,#499372)); +#499310 = ORIENTED_EDGE('',*,*,#499311,.T.); +#499311 = EDGE_CURVE('',#499312,#499314,#499316,.T.); +#499312 = VERTEX_POINT('',#499313); +#499313 = CARTESIAN_POINT('',(126.6,-117.525,-5.E-02)); +#499314 = VERTEX_POINT('',#499315); +#499315 = CARTESIAN_POINT('',(126.35,-117.275,-5.E-02)); +#499316 = CIRCLE('',#499317,0.249998959685); +#499317 = AXIS2_PLACEMENT_3D('',#499318,#499319,#499320); +#499318 = CARTESIAN_POINT('',(126.35000104031,-117.5249989596,-5.E-02)); +#499319 = DIRECTION('',(0.,0.,1.)); +#499320 = DIRECTION('',(0.999999999991,-4.16128589391E-06,0.)); +#499321 = ORIENTED_EDGE('',*,*,#499322,.T.); +#499322 = EDGE_CURVE('',#499314,#499323,#499325,.T.); +#499323 = VERTEX_POINT('',#499324); +#499324 = CARTESIAN_POINT('',(125.85,-117.275,-5.E-02)); +#499325 = LINE('',#499326,#499327); +#499326 = CARTESIAN_POINT('',(126.35,-117.275,-5.E-02)); +#499327 = VECTOR('',#499328,1.); +#499328 = DIRECTION('',(-1.,0.,0.)); +#499329 = ORIENTED_EDGE('',*,*,#499330,.T.); +#499330 = EDGE_CURVE('',#499323,#499331,#499333,.T.); +#499331 = VERTEX_POINT('',#499332); +#499332 = CARTESIAN_POINT('',(125.6,-117.525,-5.E-02)); +#499333 = CIRCLE('',#499334,0.249998959685); +#499334 = AXIS2_PLACEMENT_3D('',#499335,#499336,#499337); +#499335 = CARTESIAN_POINT('',(125.84999895968,-117.5249989596,-5.E-02)); +#499336 = DIRECTION('',(0.,0.,1.)); +#499337 = DIRECTION('',(4.16128589391E-06,0.999999999991,-0.)); +#499338 = ORIENTED_EDGE('',*,*,#499339,.T.); +#499339 = EDGE_CURVE('',#499331,#499340,#499342,.T.); +#499340 = VERTEX_POINT('',#499341); +#499341 = CARTESIAN_POINT('',(125.6,-118.475,-5.E-02)); +#499342 = LINE('',#499343,#499344); +#499343 = CARTESIAN_POINT('',(125.6,-117.525,-5.E-02)); +#499344 = VECTOR('',#499345,1.); +#499345 = DIRECTION('',(0.,-1.,0.)); +#499346 = ORIENTED_EDGE('',*,*,#499347,.T.); +#499347 = EDGE_CURVE('',#499340,#499348,#499350,.T.); +#499348 = VERTEX_POINT('',#499349); +#499349 = CARTESIAN_POINT('',(125.85,-118.725,-5.E-02)); +#499350 = CIRCLE('',#499351,0.249998959685); +#499351 = AXIS2_PLACEMENT_3D('',#499352,#499353,#499354); +#499352 = CARTESIAN_POINT('',(125.84999895968,-118.4750010403,-5.E-02)); +#499353 = DIRECTION('',(0.,0.,1.)); +#499354 = DIRECTION('',(-0.999999999991,4.16128589391E-06,0.)); +#499355 = ORIENTED_EDGE('',*,*,#499356,.T.); +#499356 = EDGE_CURVE('',#499348,#499357,#499359,.T.); +#499357 = VERTEX_POINT('',#499358); +#499358 = CARTESIAN_POINT('',(126.35,-118.725,-5.E-02)); +#499359 = LINE('',#499360,#499361); +#499360 = CARTESIAN_POINT('',(125.85,-118.725,-5.E-02)); +#499361 = VECTOR('',#499362,1.); +#499362 = DIRECTION('',(1.,0.,0.)); +#499363 = ORIENTED_EDGE('',*,*,#499364,.T.); +#499364 = EDGE_CURVE('',#499357,#499365,#499367,.T.); +#499365 = VERTEX_POINT('',#499366); +#499366 = CARTESIAN_POINT('',(126.6,-118.475,-5.E-02)); +#499367 = CIRCLE('',#499368,0.249998959685); +#499368 = AXIS2_PLACEMENT_3D('',#499369,#499370,#499371); +#499369 = CARTESIAN_POINT('',(126.35000104031,-118.4750010403,-5.E-02)); +#499370 = DIRECTION('',(0.,0.,1.)); +#499371 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#499372 = ORIENTED_EDGE('',*,*,#499373,.T.); +#499373 = EDGE_CURVE('',#499365,#499312,#499374,.T.); +#499374 = LINE('',#499375,#499376); +#499375 = CARTESIAN_POINT('',(126.6,-118.475,-5.E-02)); +#499376 = VECTOR('',#499377,1.); +#499377 = DIRECTION('',(0.,1.,0.)); +#499378 = FACE_BOUND('',#499379,.T.); +#499379 = EDGE_LOOP('',(#499380,#499391,#499399,#499408,#499416,#499425, + #499433,#499442)); +#499380 = ORIENTED_EDGE('',*,*,#499381,.T.); +#499381 = EDGE_CURVE('',#499382,#499384,#499386,.T.); +#499382 = VERTEX_POINT('',#499383); +#499383 = CARTESIAN_POINT('',(128.5,-117.525,-5.E-02)); +#499384 = VERTEX_POINT('',#499385); +#499385 = CARTESIAN_POINT('',(128.25,-117.275,-5.E-02)); +#499386 = CIRCLE('',#499387,0.249998959685); +#499387 = AXIS2_PLACEMENT_3D('',#499388,#499389,#499390); +#499388 = CARTESIAN_POINT('',(128.25000104031,-117.5249989596,-5.E-02)); +#499389 = DIRECTION('',(0.,0.,1.)); +#499390 = DIRECTION('',(0.999999999991,-4.161285780223E-06,0.)); +#499391 = ORIENTED_EDGE('',*,*,#499392,.T.); +#499392 = EDGE_CURVE('',#499384,#499393,#499395,.T.); +#499393 = VERTEX_POINT('',#499394); +#499394 = CARTESIAN_POINT('',(127.75,-117.275,-5.E-02)); +#499395 = LINE('',#499396,#499397); +#499396 = CARTESIAN_POINT('',(128.25,-117.275,-5.E-02)); +#499397 = VECTOR('',#499398,1.); +#499398 = DIRECTION('',(-1.,0.,0.)); +#499399 = ORIENTED_EDGE('',*,*,#499400,.T.); +#499400 = EDGE_CURVE('',#499393,#499401,#499403,.T.); +#499401 = VERTEX_POINT('',#499402); +#499402 = CARTESIAN_POINT('',(127.5,-117.525,-5.E-02)); +#499403 = CIRCLE('',#499404,0.249998959685); +#499404 = AXIS2_PLACEMENT_3D('',#499405,#499406,#499407); +#499405 = CARTESIAN_POINT('',(127.74999895968,-117.5249989596,-5.E-02)); +#499406 = DIRECTION('',(0.,0.,1.)); +#499407 = DIRECTION('',(4.16128589391E-06,0.999999999991,-0.)); +#499408 = ORIENTED_EDGE('',*,*,#499409,.T.); +#499409 = EDGE_CURVE('',#499401,#499410,#499412,.T.); +#499410 = VERTEX_POINT('',#499411); +#499411 = CARTESIAN_POINT('',(127.5,-118.475,-5.E-02)); +#499412 = LINE('',#499413,#499414); +#499413 = CARTESIAN_POINT('',(127.5,-117.525,-5.E-02)); +#499414 = VECTOR('',#499415,1.); +#499415 = DIRECTION('',(0.,-1.,0.)); +#499416 = ORIENTED_EDGE('',*,*,#499417,.T.); +#499417 = EDGE_CURVE('',#499410,#499418,#499420,.T.); +#499418 = VERTEX_POINT('',#499419); +#499419 = CARTESIAN_POINT('',(127.75,-118.725,-5.E-02)); +#499420 = CIRCLE('',#499421,0.249998959685); +#499421 = AXIS2_PLACEMENT_3D('',#499422,#499423,#499424); +#499422 = CARTESIAN_POINT('',(127.74999895968,-118.4750010403,-5.E-02)); +#499423 = DIRECTION('',(0.,0.,1.)); +#499424 = DIRECTION('',(-0.999999999991,4.16128589391E-06,0.)); +#499425 = ORIENTED_EDGE('',*,*,#499426,.T.); +#499426 = EDGE_CURVE('',#499418,#499427,#499429,.T.); +#499427 = VERTEX_POINT('',#499428); +#499428 = CARTESIAN_POINT('',(128.25,-118.725,-5.E-02)); +#499429 = LINE('',#499430,#499431); +#499430 = CARTESIAN_POINT('',(127.75,-118.725,-5.E-02)); +#499431 = VECTOR('',#499432,1.); +#499432 = DIRECTION('',(1.,0.,0.)); +#499433 = ORIENTED_EDGE('',*,*,#499434,.T.); +#499434 = EDGE_CURVE('',#499427,#499435,#499437,.T.); +#499435 = VERTEX_POINT('',#499436); +#499436 = CARTESIAN_POINT('',(128.5,-118.475,-5.E-02)); +#499437 = CIRCLE('',#499438,0.249998959685); +#499438 = AXIS2_PLACEMENT_3D('',#499439,#499440,#499441); +#499439 = CARTESIAN_POINT('',(128.25000104031,-118.4750010403,-5.E-02)); +#499440 = DIRECTION('',(0.,0.,1.)); +#499441 = DIRECTION('',(-4.161285837066E-06,-0.999999999991,0.)); +#499442 = ORIENTED_EDGE('',*,*,#499443,.T.); +#499443 = EDGE_CURVE('',#499435,#499382,#499444,.T.); +#499444 = LINE('',#499445,#499446); +#499445 = CARTESIAN_POINT('',(128.5,-118.475,-5.E-02)); +#499446 = VECTOR('',#499447,1.); +#499447 = DIRECTION('',(0.,1.,0.)); +#499448 = FACE_BOUND('',#499449,.T.); +#499449 = EDGE_LOOP('',(#499450,#499460,#499468,#499476,#499484,#499492, + #499500,#499508,#499516,#499524,#499532,#499540)); +#499450 = ORIENTED_EDGE('',*,*,#499451,.T.); +#499451 = EDGE_CURVE('',#499452,#499454,#499456,.T.); +#499452 = VERTEX_POINT('',#499453); +#499453 = CARTESIAN_POINT('',(132.234536,-118.057464,-5.E-02)); +#499454 = VERTEX_POINT('',#499455); +#499455 = CARTESIAN_POINT('',(132.206581,-118.045257,-5.E-02)); +#499456 = LINE('',#499457,#499458); +#499457 = CARTESIAN_POINT('',(132.234536,-118.057464,-5.E-02)); +#499458 = VECTOR('',#499459,1.); +#499459 = DIRECTION('',(-0.91643775094,0.400177271533,0.)); +#499460 = ORIENTED_EDGE('',*,*,#499461,.T.); +#499461 = EDGE_CURVE('',#499454,#499462,#499464,.T.); +#499462 = VERTEX_POINT('',#499463); +#499463 = CARTESIAN_POINT('',(131.695,-118.045,-5.E-02)); +#499464 = LINE('',#499465,#499466); +#499465 = CARTESIAN_POINT('',(132.206581,-118.045257,-5.E-02)); +#499466 = VECTOR('',#499467,1.); +#499467 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#499468 = ORIENTED_EDGE('',*,*,#499469,.T.); +#499469 = EDGE_CURVE('',#499462,#499470,#499472,.T.); +#499470 = VERTEX_POINT('',#499471); +#499471 = CARTESIAN_POINT('',(131.669464,-118.054464,-5.E-02)); +#499472 = LINE('',#499473,#499474); +#499473 = CARTESIAN_POINT('',(131.695,-118.045,-5.E-02)); +#499474 = VECTOR('',#499475,1.); +#499475 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#499476 = ORIENTED_EDGE('',*,*,#499477,.T.); +#499477 = EDGE_CURVE('',#499470,#499478,#499480,.T.); +#499478 = VERTEX_POINT('',#499479); +#499479 = CARTESIAN_POINT('',(131.647257,-118.083419,-5.E-02)); +#499480 = LINE('',#499481,#499482); +#499481 = CARTESIAN_POINT('',(131.669464,-118.054464,-5.E-02)); +#499482 = VECTOR('',#499483,1.); +#499483 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#499484 = ORIENTED_EDGE('',*,*,#499485,.T.); +#499485 = EDGE_CURVE('',#499478,#499486,#499488,.T.); +#499486 = VERTEX_POINT('',#499487); +#499487 = CARTESIAN_POINT('',(131.645,-118.305,-5.E-02)); +#499488 = LINE('',#499489,#499490); +#499489 = CARTESIAN_POINT('',(131.647257,-118.083419,-5.E-02)); +#499490 = VECTOR('',#499491,1.); +#499491 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#499492 = ORIENTED_EDGE('',*,*,#499493,.T.); +#499493 = EDGE_CURVE('',#499486,#499494,#499496,.T.); +#499494 = VERTEX_POINT('',#499495); +#499495 = CARTESIAN_POINT('',(131.654464,-118.330536,-5.E-02)); +#499496 = LINE('',#499497,#499498); +#499497 = CARTESIAN_POINT('',(131.645,-118.305,-5.E-02)); +#499498 = VECTOR('',#499499,1.); +#499499 = DIRECTION('',(0.347515265307,-0.937674325328,0.)); +#499500 = ORIENTED_EDGE('',*,*,#499501,.T.); +#499501 = EDGE_CURVE('',#499494,#499502,#499504,.T.); +#499502 = VERTEX_POINT('',#499503); +#499503 = CARTESIAN_POINT('',(131.683419,-118.352743,-5.E-02)); +#499504 = LINE('',#499505,#499506); +#499505 = CARTESIAN_POINT('',(131.654464,-118.330536,-5.E-02)); +#499506 = VECTOR('',#499507,1.); +#499507 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#499508 = ORIENTED_EDGE('',*,*,#499509,.T.); +#499509 = EDGE_CURVE('',#499502,#499510,#499512,.T.); +#499510 = VERTEX_POINT('',#499511); +#499511 = CARTESIAN_POINT('',(132.205,-118.355,-5.E-02)); +#499512 = LINE('',#499513,#499514); +#499513 = CARTESIAN_POINT('',(131.683419,-118.352743,-5.E-02)); +#499514 = VECTOR('',#499515,1.); +#499515 = DIRECTION('',(0.99999063768,-4.32718766451E-03,0.)); +#499516 = ORIENTED_EDGE('',*,*,#499517,.T.); +#499517 = EDGE_CURVE('',#499510,#499518,#499520,.T.); +#499518 = VERTEX_POINT('',#499519); +#499519 = CARTESIAN_POINT('',(132.230536,-118.345536,-5.E-02)); +#499520 = LINE('',#499521,#499522); +#499521 = CARTESIAN_POINT('',(132.205,-118.355,-5.E-02)); +#499522 = VECTOR('',#499523,1.); +#499523 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#499524 = ORIENTED_EDGE('',*,*,#499525,.T.); +#499525 = EDGE_CURVE('',#499518,#499526,#499528,.T.); +#499526 = VERTEX_POINT('',#499527); +#499527 = CARTESIAN_POINT('',(132.252743,-118.316581,-5.E-02)); +#499528 = LINE('',#499529,#499530); +#499529 = CARTESIAN_POINT('',(132.230536,-118.345536,-5.E-02)); +#499530 = VECTOR('',#499531,1.); +#499531 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#499532 = ORIENTED_EDGE('',*,*,#499533,.T.); +#499533 = EDGE_CURVE('',#499526,#499534,#499536,.T.); +#499534 = VERTEX_POINT('',#499535); +#499535 = CARTESIAN_POINT('',(132.253,-118.085,-5.E-02)); +#499536 = LINE('',#499537,#499538); +#499537 = CARTESIAN_POINT('',(132.252743,-118.316581,-5.E-02)); +#499538 = VECTOR('',#499539,1.); +#499539 = DIRECTION('',(1.109762207259E-03,0.999999384214,0.)); +#499540 = ORIENTED_EDGE('',*,*,#499541,.T.); +#499541 = EDGE_CURVE('',#499534,#499452,#499542,.T.); +#499542 = LINE('',#499543,#499544); +#499543 = CARTESIAN_POINT('',(132.253,-118.085,-5.E-02)); +#499544 = VECTOR('',#499545,1.); +#499545 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#499546 = FACE_BOUND('',#499547,.T.); +#499547 = EDGE_LOOP('',(#499548,#499558,#499566,#499574,#499582,#499590, + #499598,#499606,#499614,#499622,#499630,#499638)); +#499548 = ORIENTED_EDGE('',*,*,#499549,.T.); +#499549 = EDGE_CURVE('',#499550,#499552,#499554,.T.); +#499550 = VERTEX_POINT('',#499551); +#499551 = CARTESIAN_POINT('',(134.334536,-118.057464,-5.E-02)); +#499552 = VERTEX_POINT('',#499553); +#499553 = CARTESIAN_POINT('',(134.306581,-118.045257,-5.E-02)); +#499554 = LINE('',#499555,#499556); +#499555 = CARTESIAN_POINT('',(134.334536,-118.057464,-5.E-02)); +#499556 = VECTOR('',#499557,1.); +#499557 = DIRECTION('',(-0.91643775094,0.400177271533,0.)); +#499558 = ORIENTED_EDGE('',*,*,#499559,.T.); +#499559 = EDGE_CURVE('',#499552,#499560,#499562,.T.); +#499560 = VERTEX_POINT('',#499561); +#499561 = CARTESIAN_POINT('',(133.795,-118.045,-5.E-02)); +#499562 = LINE('',#499563,#499564); +#499563 = CARTESIAN_POINT('',(134.306581,-118.045257,-5.E-02)); +#499564 = VECTOR('',#499565,1.); +#499565 = DIRECTION('',(-0.999999873815,5.023641761037E-04,0.)); +#499566 = ORIENTED_EDGE('',*,*,#499567,.T.); +#499567 = EDGE_CURVE('',#499560,#499568,#499570,.T.); +#499568 = VERTEX_POINT('',#499569); +#499569 = CARTESIAN_POINT('',(133.769464,-118.054464,-5.E-02)); +#499570 = LINE('',#499571,#499572); +#499571 = CARTESIAN_POINT('',(133.795,-118.045,-5.E-02)); +#499572 = VECTOR('',#499573,1.); +#499573 = DIRECTION('',(-0.937674325327,-0.347515265308,0.)); +#499574 = ORIENTED_EDGE('',*,*,#499575,.T.); +#499575 = EDGE_CURVE('',#499568,#499576,#499578,.T.); +#499576 = VERTEX_POINT('',#499577); +#499577 = CARTESIAN_POINT('',(133.747257,-118.083419,-5.E-02)); +#499578 = LINE('',#499579,#499580); +#499579 = CARTESIAN_POINT('',(133.769464,-118.054464,-5.E-02)); +#499580 = VECTOR('',#499581,1.); +#499581 = DIRECTION('',(-0.608572488102,-0.793498284009,0.)); +#499582 = ORIENTED_EDGE('',*,*,#499583,.T.); +#499583 = EDGE_CURVE('',#499576,#499584,#499586,.T.); +#499584 = VERTEX_POINT('',#499585); +#499585 = CARTESIAN_POINT('',(133.745,-118.305,-5.E-02)); +#499586 = LINE('',#499587,#499588); +#499587 = CARTESIAN_POINT('',(133.747257,-118.083419,-5.E-02)); +#499588 = VECTOR('',#499589,1.); +#499589 = DIRECTION('',(-1.01853630254E-02,-0.999948127845,0.)); +#499590 = ORIENTED_EDGE('',*,*,#499591,.T.); +#499591 = EDGE_CURVE('',#499584,#499592,#499594,.T.); +#499592 = VERTEX_POINT('',#499593); +#499593 = CARTESIAN_POINT('',(133.754464,-118.330536,-5.E-02)); +#499594 = LINE('',#499595,#499596); +#499595 = CARTESIAN_POINT('',(133.745,-118.305,-5.E-02)); +#499596 = VECTOR('',#499597,1.); +#499597 = DIRECTION('',(0.347515265308,-0.937674325327,0.)); +#499598 = ORIENTED_EDGE('',*,*,#499599,.T.); +#499599 = EDGE_CURVE('',#499592,#499600,#499602,.T.); +#499600 = VERTEX_POINT('',#499601); +#499601 = CARTESIAN_POINT('',(133.783419,-118.352743,-5.E-02)); +#499602 = LINE('',#499603,#499604); +#499603 = CARTESIAN_POINT('',(133.754464,-118.330536,-5.E-02)); +#499604 = VECTOR('',#499605,1.); +#499605 = DIRECTION('',(0.793498284009,-0.608572488102,0.)); +#499606 = ORIENTED_EDGE('',*,*,#499607,.T.); +#499607 = EDGE_CURVE('',#499600,#499608,#499610,.T.); +#499608 = VERTEX_POINT('',#499609); +#499609 = CARTESIAN_POINT('',(134.305,-118.355,-5.E-02)); +#499610 = LINE('',#499611,#499612); +#499611 = CARTESIAN_POINT('',(133.783419,-118.352743,-5.E-02)); +#499612 = VECTOR('',#499613,1.); +#499613 = DIRECTION('',(0.99999063768,-4.327187664511E-03,0.)); +#499614 = ORIENTED_EDGE('',*,*,#499615,.T.); +#499615 = EDGE_CURVE('',#499608,#499616,#499618,.T.); +#499616 = VERTEX_POINT('',#499617); +#499617 = CARTESIAN_POINT('',(134.330536,-118.345536,-5.E-02)); +#499618 = LINE('',#499619,#499620); +#499619 = CARTESIAN_POINT('',(134.305,-118.355,-5.E-02)); +#499620 = VECTOR('',#499621,1.); +#499621 = DIRECTION('',(0.937674325327,0.347515265308,0.)); +#499622 = ORIENTED_EDGE('',*,*,#499623,.T.); +#499623 = EDGE_CURVE('',#499616,#499624,#499626,.T.); +#499624 = VERTEX_POINT('',#499625); +#499625 = CARTESIAN_POINT('',(134.352743,-118.316581,-5.E-02)); +#499626 = LINE('',#499627,#499628); +#499627 = CARTESIAN_POINT('',(134.330536,-118.345536,-5.E-02)); +#499628 = VECTOR('',#499629,1.); +#499629 = DIRECTION('',(0.608572488102,0.793498284009,0.)); +#499630 = ORIENTED_EDGE('',*,*,#499631,.T.); +#499631 = EDGE_CURVE('',#499624,#499632,#499634,.T.); +#499632 = VERTEX_POINT('',#499633); +#499633 = CARTESIAN_POINT('',(134.353,-118.085,-5.E-02)); +#499634 = LINE('',#499635,#499636); +#499635 = CARTESIAN_POINT('',(134.352743,-118.316581,-5.E-02)); +#499636 = VECTOR('',#499637,1.); +#499637 = DIRECTION('',(1.109762207382E-03,0.999999384214,0.)); +#499638 = ORIENTED_EDGE('',*,*,#499639,.T.); +#499639 = EDGE_CURVE('',#499632,#499550,#499640,.T.); +#499640 = LINE('',#499641,#499642); +#499641 = CARTESIAN_POINT('',(134.353,-118.085,-5.E-02)); +#499642 = VECTOR('',#499643,1.); +#499643 = DIRECTION('',(-0.556925614096,0.830562375962,0.)); +#499644 = FACE_BOUND('',#499645,.T.); +#499645 = EDGE_LOOP('',(#499646,#499657,#499665,#499674,#499682,#499691, + #499699,#499708)); +#499646 = ORIENTED_EDGE('',*,*,#499647,.T.); +#499647 = EDGE_CURVE('',#499648,#499650,#499652,.T.); +#499648 = VERTEX_POINT('',#499649); +#499649 = CARTESIAN_POINT('',(130.31,-117.9,-5.E-02)); +#499650 = VERTEX_POINT('',#499651); +#499651 = CARTESIAN_POINT('',(130.17,-117.76,-5.E-02)); +#499652 = CIRCLE('',#499653,0.139999827125); +#499653 = AXIS2_PLACEMENT_3D('',#499654,#499655,#499656); +#499654 = CARTESIAN_POINT('',(130.17000017287,-117.8999998271,-5.E-02)); +#499655 = DIRECTION('',(0.,0.,1.)); +#499656 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#499657 = ORIENTED_EDGE('',*,*,#499658,.T.); +#499658 = EDGE_CURVE('',#499650,#499659,#499661,.T.); +#499659 = VERTEX_POINT('',#499660); +#499660 = CARTESIAN_POINT('',(129.83,-117.76,-5.E-02)); +#499661 = LINE('',#499662,#499663); +#499662 = CARTESIAN_POINT('',(130.17,-117.76,-5.E-02)); +#499663 = VECTOR('',#499664,1.); +#499664 = DIRECTION('',(-1.,0.,0.)); +#499665 = ORIENTED_EDGE('',*,*,#499666,.T.); +#499666 = EDGE_CURVE('',#499659,#499667,#499669,.T.); +#499667 = VERTEX_POINT('',#499668); +#499668 = CARTESIAN_POINT('',(129.69,-117.9,-5.E-02)); +#499669 = CIRCLE('',#499670,0.139999827125); +#499670 = AXIS2_PLACEMENT_3D('',#499671,#499672,#499673); +#499671 = CARTESIAN_POINT('',(129.82999982712,-117.8999998271,-5.E-02)); +#499672 = DIRECTION('',(0.,0.,1.)); +#499673 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#499674 = ORIENTED_EDGE('',*,*,#499675,.T.); +#499675 = EDGE_CURVE('',#499667,#499676,#499678,.T.); +#499676 = VERTEX_POINT('',#499677); +#499677 = CARTESIAN_POINT('',(129.69,-118.18,-5.E-02)); +#499678 = LINE('',#499679,#499680); +#499679 = CARTESIAN_POINT('',(129.69,-117.9,-5.E-02)); +#499680 = VECTOR('',#499681,1.); +#499681 = DIRECTION('',(0.,-1.,0.)); +#499682 = ORIENTED_EDGE('',*,*,#499683,.T.); +#499683 = EDGE_CURVE('',#499676,#499684,#499686,.T.); +#499684 = VERTEX_POINT('',#499685); +#499685 = CARTESIAN_POINT('',(129.83,-118.32,-5.E-02)); +#499686 = CIRCLE('',#499687,0.139999827125); +#499687 = AXIS2_PLACEMENT_3D('',#499688,#499689,#499690); +#499688 = CARTESIAN_POINT('',(129.82999982712,-118.1800001728,-5.E-02)); +#499689 = DIRECTION('',(0.,0.,1.)); +#499690 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#499691 = ORIENTED_EDGE('',*,*,#499692,.T.); +#499692 = EDGE_CURVE('',#499684,#499693,#499695,.T.); +#499693 = VERTEX_POINT('',#499694); +#499694 = CARTESIAN_POINT('',(130.17,-118.32,-5.E-02)); +#499695 = LINE('',#499696,#499697); +#499696 = CARTESIAN_POINT('',(129.83,-118.32,-5.E-02)); +#499697 = VECTOR('',#499698,1.); +#499698 = DIRECTION('',(1.,0.,0.)); +#499699 = ORIENTED_EDGE('',*,*,#499700,.T.); +#499700 = EDGE_CURVE('',#499693,#499701,#499703,.T.); +#499701 = VERTEX_POINT('',#499702); +#499702 = CARTESIAN_POINT('',(130.31,-118.18,-5.E-02)); +#499703 = CIRCLE('',#499704,0.139999827125); +#499704 = AXIS2_PLACEMENT_3D('',#499705,#499706,#499707); +#499705 = CARTESIAN_POINT('',(130.17000017287,-118.1800001728,-5.E-02)); +#499706 = DIRECTION('',(0.,0.,1.)); +#499707 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#499708 = ORIENTED_EDGE('',*,*,#499709,.T.); +#499709 = EDGE_CURVE('',#499701,#499648,#499710,.T.); +#499710 = LINE('',#499711,#499712); +#499711 = CARTESIAN_POINT('',(130.31,-118.18,-5.E-02)); +#499712 = VECTOR('',#499713,1.); +#499713 = DIRECTION('',(0.,1.,0.)); +#499714 = FACE_BOUND('',#499715,.T.); +#499715 = EDGE_LOOP('',(#499716,#499727,#499735,#499744,#499752,#499761, + #499769,#499778)); +#499716 = ORIENTED_EDGE('',*,*,#499717,.T.); +#499717 = EDGE_CURVE('',#499718,#499720,#499722,.T.); +#499718 = VERTEX_POINT('',#499719); +#499719 = CARTESIAN_POINT('',(149.3625,-117.8,-5.E-02)); +#499720 = VERTEX_POINT('',#499721); +#499721 = CARTESIAN_POINT('',(149.2125,-117.65,-5.E-02)); +#499722 = CIRCLE('',#499723,0.150000058649); +#499723 = AXIS2_PLACEMENT_3D('',#499724,#499725,#499726); +#499724 = CARTESIAN_POINT('',(149.21249994135,-117.8000000586,-5.E-02)); +#499725 = DIRECTION('',(0.,0.,1.)); +#499726 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#499727 = ORIENTED_EDGE('',*,*,#499728,.T.); +#499728 = EDGE_CURVE('',#499720,#499729,#499731,.T.); +#499729 = VERTEX_POINT('',#499730); +#499730 = CARTESIAN_POINT('',(148.0375,-117.65,-5.E-02)); +#499731 = LINE('',#499732,#499733); +#499732 = CARTESIAN_POINT('',(149.2125,-117.65,-5.E-02)); +#499733 = VECTOR('',#499734,1.); +#499734 = DIRECTION('',(-1.,0.,0.)); +#499735 = ORIENTED_EDGE('',*,*,#499736,.T.); +#499736 = EDGE_CURVE('',#499729,#499737,#499739,.T.); +#499737 = VERTEX_POINT('',#499738); +#499738 = CARTESIAN_POINT('',(147.8875,-117.8,-5.E-02)); +#499739 = CIRCLE('',#499740,0.150000058649); +#499740 = AXIS2_PLACEMENT_3D('',#499741,#499742,#499743); +#499741 = CARTESIAN_POINT('',(148.03750005864,-117.8000000586,-5.E-02)); +#499742 = DIRECTION('',(0.,0.,1.)); +#499743 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#499744 = ORIENTED_EDGE('',*,*,#499745,.T.); +#499745 = EDGE_CURVE('',#499737,#499746,#499748,.T.); +#499746 = VERTEX_POINT('',#499747); +#499747 = CARTESIAN_POINT('',(147.8875,-118.1,-5.E-02)); +#499748 = LINE('',#499749,#499750); +#499749 = CARTESIAN_POINT('',(147.8875,-117.8,-5.E-02)); +#499750 = VECTOR('',#499751,1.); +#499751 = DIRECTION('',(0.,-1.,0.)); +#499752 = ORIENTED_EDGE('',*,*,#499753,.T.); +#499753 = EDGE_CURVE('',#499746,#499754,#499756,.T.); +#499754 = VERTEX_POINT('',#499755); +#499755 = CARTESIAN_POINT('',(148.0375,-118.25,-5.E-02)); +#499756 = CIRCLE('',#499757,0.150000058649); +#499757 = AXIS2_PLACEMENT_3D('',#499758,#499759,#499760); +#499758 = CARTESIAN_POINT('',(148.03750005864,-118.0999999413,-5.E-02)); +#499759 = DIRECTION('',(0.,0.,1.)); +#499760 = DIRECTION('',(-1.,-3.909953142369E-07,0.)); +#499761 = ORIENTED_EDGE('',*,*,#499762,.T.); +#499762 = EDGE_CURVE('',#499754,#499763,#499765,.T.); +#499763 = VERTEX_POINT('',#499764); +#499764 = CARTESIAN_POINT('',(149.2125,-118.25,-5.E-02)); +#499765 = LINE('',#499766,#499767); +#499766 = CARTESIAN_POINT('',(148.0375,-118.25,-5.E-02)); +#499767 = VECTOR('',#499768,1.); +#499768 = DIRECTION('',(1.,0.,0.)); +#499769 = ORIENTED_EDGE('',*,*,#499770,.T.); +#499770 = EDGE_CURVE('',#499763,#499771,#499773,.T.); +#499771 = VERTEX_POINT('',#499772); +#499772 = CARTESIAN_POINT('',(149.3625,-118.1,-5.E-02)); +#499773 = CIRCLE('',#499774,0.150000058649); +#499774 = AXIS2_PLACEMENT_3D('',#499775,#499776,#499777); +#499775 = CARTESIAN_POINT('',(149.21249994135,-118.0999999413,-5.E-02)); +#499776 = DIRECTION('',(0.,0.,1.)); +#499777 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#499778 = ORIENTED_EDGE('',*,*,#499779,.T.); +#499779 = EDGE_CURVE('',#499771,#499718,#499780,.T.); +#499780 = LINE('',#499781,#499782); +#499781 = CARTESIAN_POINT('',(149.3625,-118.1,-5.E-02)); +#499782 = VECTOR('',#499783,1.); +#499783 = DIRECTION('',(0.,1.,0.)); +#499784 = FACE_BOUND('',#499785,.T.); +#499785 = EDGE_LOOP('',(#499786,#499797,#499805,#499814,#499822,#499831, + #499839,#499848)); +#499786 = ORIENTED_EDGE('',*,*,#499787,.T.); +#499787 = EDGE_CURVE('',#499788,#499790,#499792,.T.); +#499788 = VERTEX_POINT('',#499789); +#499789 = CARTESIAN_POINT('',(135.81,-117.82,-5.E-02)); +#499790 = VERTEX_POINT('',#499791); +#499791 = CARTESIAN_POINT('',(135.67,-117.68,-5.E-02)); +#499792 = CIRCLE('',#499793,0.139999827125); +#499793 = AXIS2_PLACEMENT_3D('',#499794,#499795,#499796); +#499794 = CARTESIAN_POINT('',(135.67000017287,-117.8199998271,-5.E-02)); +#499795 = DIRECTION('',(0.,0.,1.)); +#499796 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#499797 = ORIENTED_EDGE('',*,*,#499798,.T.); +#499798 = EDGE_CURVE('',#499790,#499799,#499801,.T.); +#499799 = VERTEX_POINT('',#499800); +#499800 = CARTESIAN_POINT('',(135.33,-117.68,-5.E-02)); +#499801 = LINE('',#499802,#499803); +#499802 = CARTESIAN_POINT('',(135.67,-117.68,-5.E-02)); +#499803 = VECTOR('',#499804,1.); +#499804 = DIRECTION('',(-1.,0.,0.)); +#499805 = ORIENTED_EDGE('',*,*,#499806,.T.); +#499806 = EDGE_CURVE('',#499799,#499807,#499809,.T.); +#499807 = VERTEX_POINT('',#499808); +#499808 = CARTESIAN_POINT('',(135.19,-117.82,-5.E-02)); +#499809 = CIRCLE('',#499810,0.139999827125); +#499810 = AXIS2_PLACEMENT_3D('',#499811,#499812,#499813); +#499811 = CARTESIAN_POINT('',(135.32999982712,-117.8199998271,-5.E-02)); +#499812 = DIRECTION('',(0.,0.,1.)); +#499813 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#499814 = ORIENTED_EDGE('',*,*,#499815,.T.); +#499815 = EDGE_CURVE('',#499807,#499816,#499818,.T.); +#499816 = VERTEX_POINT('',#499817); +#499817 = CARTESIAN_POINT('',(135.19,-118.1,-5.E-02)); +#499818 = LINE('',#499819,#499820); +#499819 = CARTESIAN_POINT('',(135.19,-117.82,-5.E-02)); +#499820 = VECTOR('',#499821,1.); +#499821 = DIRECTION('',(0.,-1.,0.)); +#499822 = ORIENTED_EDGE('',*,*,#499823,.T.); +#499823 = EDGE_CURVE('',#499816,#499824,#499826,.T.); +#499824 = VERTEX_POINT('',#499825); +#499825 = CARTESIAN_POINT('',(135.33,-118.24,-5.E-02)); +#499826 = CIRCLE('',#499827,0.139999827125); +#499827 = AXIS2_PLACEMENT_3D('',#499828,#499829,#499830); +#499828 = CARTESIAN_POINT('',(135.32999982712,-118.1000001728,-5.E-02)); +#499829 = DIRECTION('',(0.,0.,1.)); +#499830 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#499831 = ORIENTED_EDGE('',*,*,#499832,.T.); +#499832 = EDGE_CURVE('',#499824,#499833,#499835,.T.); +#499833 = VERTEX_POINT('',#499834); +#499834 = CARTESIAN_POINT('',(135.67,-118.24,-5.E-02)); +#499835 = LINE('',#499836,#499837); +#499836 = CARTESIAN_POINT('',(135.33,-118.24,-5.E-02)); +#499837 = VECTOR('',#499838,1.); +#499838 = DIRECTION('',(1.,0.,0.)); +#499839 = ORIENTED_EDGE('',*,*,#499840,.T.); +#499840 = EDGE_CURVE('',#499833,#499841,#499843,.T.); +#499841 = VERTEX_POINT('',#499842); +#499842 = CARTESIAN_POINT('',(135.81,-118.1,-5.E-02)); +#499843 = CIRCLE('',#499844,0.139999827125); +#499844 = AXIS2_PLACEMENT_3D('',#499845,#499846,#499847); +#499845 = CARTESIAN_POINT('',(135.67000017287,-118.1000001728,-5.E-02)); +#499846 = DIRECTION('',(0.,0.,1.)); +#499847 = DIRECTION('',(-1.234820451253E-06,-0.999999999999,0.)); +#499848 = ORIENTED_EDGE('',*,*,#499849,.T.); +#499849 = EDGE_CURVE('',#499841,#499788,#499850,.T.); +#499850 = LINE('',#499851,#499852); +#499851 = CARTESIAN_POINT('',(135.81,-118.1,-5.E-02)); +#499852 = VECTOR('',#499853,1.); +#499853 = DIRECTION('',(0.,1.,0.)); +#499854 = FACE_BOUND('',#499855,.T.); +#499855 = EDGE_LOOP('',(#499856,#499867,#499875,#499884,#499892,#499901, + #499909,#499918)); +#499856 = ORIENTED_EDGE('',*,*,#499857,.T.); +#499857 = EDGE_CURVE('',#499858,#499860,#499862,.T.); +#499858 = VERTEX_POINT('',#499859); +#499859 = CARTESIAN_POINT('',(138.5,-116.525,-5.E-02)); +#499860 = VERTEX_POINT('',#499861); +#499861 = CARTESIAN_POINT('',(138.25,-116.275,-5.E-02)); +#499862 = CIRCLE('',#499863,0.249998959685); +#499863 = AXIS2_PLACEMENT_3D('',#499864,#499865,#499866); +#499864 = CARTESIAN_POINT('',(138.25000104031,-116.5249989596,-5.E-02)); +#499865 = DIRECTION('',(0.,0.,1.)); +#499866 = DIRECTION('',(0.999999999991,-4.161285780223E-06,0.)); +#499867 = ORIENTED_EDGE('',*,*,#499868,.T.); +#499868 = EDGE_CURVE('',#499860,#499869,#499871,.T.); +#499869 = VERTEX_POINT('',#499870); +#499870 = CARTESIAN_POINT('',(137.75,-116.275,-5.E-02)); +#499871 = LINE('',#499872,#499873); +#499872 = CARTESIAN_POINT('',(138.25,-116.275,-5.E-02)); +#499873 = VECTOR('',#499874,1.); +#499874 = DIRECTION('',(-1.,0.,0.)); +#499875 = ORIENTED_EDGE('',*,*,#499876,.T.); +#499876 = EDGE_CURVE('',#499869,#499877,#499879,.T.); +#499877 = VERTEX_POINT('',#499878); +#499878 = CARTESIAN_POINT('',(137.5,-116.525,-5.E-02)); +#499879 = CIRCLE('',#499880,0.249998959685); +#499880 = AXIS2_PLACEMENT_3D('',#499881,#499882,#499883); +#499881 = CARTESIAN_POINT('',(137.74999895968,-116.5249989596,-5.E-02)); +#499882 = DIRECTION('',(0.,0.,1.)); +#499883 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#499884 = ORIENTED_EDGE('',*,*,#499885,.T.); +#499885 = EDGE_CURVE('',#499877,#499886,#499888,.T.); +#499886 = VERTEX_POINT('',#499887); +#499887 = CARTESIAN_POINT('',(137.5,-117.475,-5.E-02)); +#499888 = LINE('',#499889,#499890); +#499889 = CARTESIAN_POINT('',(137.5,-116.525,-5.E-02)); +#499890 = VECTOR('',#499891,1.); +#499891 = DIRECTION('',(0.,-1.,0.)); +#499892 = ORIENTED_EDGE('',*,*,#499893,.T.); +#499893 = EDGE_CURVE('',#499886,#499894,#499896,.T.); +#499894 = VERTEX_POINT('',#499895); +#499895 = CARTESIAN_POINT('',(137.75,-117.725,-5.E-02)); +#499896 = CIRCLE('',#499897,0.249998959685); +#499897 = AXIS2_PLACEMENT_3D('',#499898,#499899,#499900); +#499898 = CARTESIAN_POINT('',(137.74999895968,-117.4750010403,-5.E-02)); +#499899 = DIRECTION('',(0.,0.,1.)); +#499900 = DIRECTION('',(-0.999999999991,4.161285780223E-06,0.)); +#499901 = ORIENTED_EDGE('',*,*,#499902,.T.); +#499902 = EDGE_CURVE('',#499894,#499903,#499905,.T.); +#499903 = VERTEX_POINT('',#499904); +#499904 = CARTESIAN_POINT('',(138.25,-117.725,-5.E-02)); +#499905 = LINE('',#499906,#499907); +#499906 = CARTESIAN_POINT('',(137.75,-117.725,-5.E-02)); +#499907 = VECTOR('',#499908,1.); +#499908 = DIRECTION('',(1.,0.,0.)); +#499909 = ORIENTED_EDGE('',*,*,#499910,.T.); +#499910 = EDGE_CURVE('',#499903,#499911,#499913,.T.); +#499911 = VERTEX_POINT('',#499912); +#499912 = CARTESIAN_POINT('',(138.5,-117.475,-5.E-02)); +#499913 = CIRCLE('',#499914,0.249998959685); +#499914 = AXIS2_PLACEMENT_3D('',#499915,#499916,#499917); +#499915 = CARTESIAN_POINT('',(138.25000104031,-117.4750010403,-5.E-02)); +#499916 = DIRECTION('',(0.,0.,1.)); +#499917 = DIRECTION('',(-4.161285837066E-06,-0.999999999991,0.)); +#499918 = ORIENTED_EDGE('',*,*,#499919,.T.); +#499919 = EDGE_CURVE('',#499911,#499858,#499920,.T.); +#499920 = LINE('',#499921,#499922); +#499921 = CARTESIAN_POINT('',(138.5,-117.475,-5.E-02)); +#499922 = VECTOR('',#499923,1.); +#499923 = DIRECTION('',(0.,1.,0.)); +#499924 = FACE_BOUND('',#499925,.T.); +#499925 = EDGE_LOOP('',(#499926,#499937,#499945,#499954,#499962,#499971, + #499979,#499988)); +#499926 = ORIENTED_EDGE('',*,*,#499927,.T.); +#499927 = EDGE_CURVE('',#499928,#499930,#499932,.T.); +#499928 = VERTEX_POINT('',#499929); +#499929 = CARTESIAN_POINT('',(140.4,-116.525,-5.E-02)); +#499930 = VERTEX_POINT('',#499931); +#499931 = CARTESIAN_POINT('',(140.15,-116.275,-5.E-02)); +#499932 = CIRCLE('',#499933,0.249998959685); +#499933 = AXIS2_PLACEMENT_3D('',#499934,#499935,#499936); +#499934 = CARTESIAN_POINT('',(140.15000104031,-116.5249989596,-5.E-02)); +#499935 = DIRECTION('',(0.,0.,1.)); +#499936 = DIRECTION('',(0.999999999991,-4.161285780222E-06,0.)); +#499937 = ORIENTED_EDGE('',*,*,#499938,.T.); +#499938 = EDGE_CURVE('',#499930,#499939,#499941,.T.); +#499939 = VERTEX_POINT('',#499940); +#499940 = CARTESIAN_POINT('',(139.65,-116.275,-5.E-02)); +#499941 = LINE('',#499942,#499943); +#499942 = CARTESIAN_POINT('',(140.15,-116.275,-5.E-02)); +#499943 = VECTOR('',#499944,1.); +#499944 = DIRECTION('',(-1.,0.,0.)); +#499945 = ORIENTED_EDGE('',*,*,#499946,.T.); +#499946 = EDGE_CURVE('',#499939,#499947,#499949,.T.); +#499947 = VERTEX_POINT('',#499948); +#499948 = CARTESIAN_POINT('',(139.4,-116.525,-5.E-02)); +#499949 = CIRCLE('',#499950,0.249998959685); +#499950 = AXIS2_PLACEMENT_3D('',#499951,#499952,#499953); +#499951 = CARTESIAN_POINT('',(139.64999895968,-116.5249989596,-5.E-02)); +#499952 = DIRECTION('',(0.,0.,1.)); +#499953 = DIRECTION('',(4.161285950754E-06,0.999999999991,-0.)); +#499954 = ORIENTED_EDGE('',*,*,#499955,.T.); +#499955 = EDGE_CURVE('',#499947,#499956,#499958,.T.); +#499956 = VERTEX_POINT('',#499957); +#499957 = CARTESIAN_POINT('',(139.4,-117.475,-5.E-02)); +#499958 = LINE('',#499959,#499960); +#499959 = CARTESIAN_POINT('',(139.4,-116.525,-5.E-02)); +#499960 = VECTOR('',#499961,1.); +#499961 = DIRECTION('',(0.,-1.,0.)); +#499962 = ORIENTED_EDGE('',*,*,#499963,.T.); +#499963 = EDGE_CURVE('',#499956,#499964,#499966,.T.); +#499964 = VERTEX_POINT('',#499965); +#499965 = CARTESIAN_POINT('',(139.65,-117.725,-5.E-02)); +#499966 = CIRCLE('',#499967,0.249998959685); +#499967 = AXIS2_PLACEMENT_3D('',#499968,#499969,#499970); +#499968 = CARTESIAN_POINT('',(139.64999895968,-117.4750010403,-5.E-02)); +#499969 = DIRECTION('',(0.,0.,1.)); +#499970 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#499971 = ORIENTED_EDGE('',*,*,#499972,.T.); +#499972 = EDGE_CURVE('',#499964,#499973,#499975,.T.); +#499973 = VERTEX_POINT('',#499974); +#499974 = CARTESIAN_POINT('',(140.15,-117.725,-5.E-02)); +#499975 = LINE('',#499976,#499977); +#499976 = CARTESIAN_POINT('',(139.65,-117.725,-5.E-02)); +#499977 = VECTOR('',#499978,1.); +#499978 = DIRECTION('',(1.,0.,0.)); +#499979 = ORIENTED_EDGE('',*,*,#499980,.T.); +#499980 = EDGE_CURVE('',#499973,#499981,#499983,.T.); +#499981 = VERTEX_POINT('',#499982); +#499982 = CARTESIAN_POINT('',(140.4,-117.475,-5.E-02)); +#499983 = CIRCLE('',#499984,0.249998959685); +#499984 = AXIS2_PLACEMENT_3D('',#499985,#499986,#499987); +#499985 = CARTESIAN_POINT('',(140.15000104031,-117.4750010403,-5.E-02)); +#499986 = DIRECTION('',(0.,0.,1.)); +#499987 = DIRECTION('',(-4.161285723379E-06,-0.999999999991,0.)); +#499988 = ORIENTED_EDGE('',*,*,#499989,.T.); +#499989 = EDGE_CURVE('',#499981,#499928,#499990,.T.); +#499990 = LINE('',#499991,#499992); +#499991 = CARTESIAN_POINT('',(140.4,-117.475,-5.E-02)); +#499992 = VECTOR('',#499993,1.); +#499993 = DIRECTION('',(0.,1.,0.)); +#499994 = FACE_BOUND('',#499995,.T.); +#499995 = EDGE_LOOP('',(#499996,#500007,#500015,#500024,#500032,#500041, + #500049,#500058)); +#499996 = ORIENTED_EDGE('',*,*,#499997,.T.); +#499997 = EDGE_CURVE('',#499998,#500000,#500002,.T.); +#499998 = VERTEX_POINT('',#499999); +#499999 = CARTESIAN_POINT('',(151.2375,-116.85,-5.E-02)); +#500000 = VERTEX_POINT('',#500001); +#500001 = CARTESIAN_POINT('',(151.0875,-116.7,-5.E-02)); +#500002 = CIRCLE('',#500003,0.150000058649); +#500003 = AXIS2_PLACEMENT_3D('',#500004,#500005,#500006); +#500004 = CARTESIAN_POINT('',(151.08749994135,-116.8500000586,-5.E-02)); +#500005 = DIRECTION('',(0.,0.,1.)); +#500006 = DIRECTION('',(1.,3.90995408976E-07,-0.)); +#500007 = ORIENTED_EDGE('',*,*,#500008,.T.); +#500008 = EDGE_CURVE('',#500000,#500009,#500011,.T.); +#500009 = VERTEX_POINT('',#500010); +#500010 = CARTESIAN_POINT('',(149.9125,-116.7,-5.E-02)); +#500011 = LINE('',#500012,#500013); +#500012 = CARTESIAN_POINT('',(151.0875,-116.7,-5.E-02)); +#500013 = VECTOR('',#500014,1.); +#500014 = DIRECTION('',(-1.,0.,0.)); +#500015 = ORIENTED_EDGE('',*,*,#500016,.T.); +#500016 = EDGE_CURVE('',#500009,#500017,#500019,.T.); +#500017 = VERTEX_POINT('',#500018); +#500018 = CARTESIAN_POINT('',(149.7625,-116.85,-5.E-02)); +#500019 = CIRCLE('',#500020,0.150000058649); +#500020 = AXIS2_PLACEMENT_3D('',#500021,#500022,#500023); +#500021 = CARTESIAN_POINT('',(149.91250005864,-116.8500000586,-5.E-02)); +#500022 = DIRECTION('',(0.,0.,1.)); +#500023 = DIRECTION('',(-3.90995219498E-07,1.,0.)); +#500024 = ORIENTED_EDGE('',*,*,#500025,.T.); +#500025 = EDGE_CURVE('',#500017,#500026,#500028,.T.); +#500026 = VERTEX_POINT('',#500027); +#500027 = CARTESIAN_POINT('',(149.7625,-117.15,-5.E-02)); +#500028 = LINE('',#500029,#500030); +#500029 = CARTESIAN_POINT('',(149.7625,-116.85,-5.E-02)); +#500030 = VECTOR('',#500031,1.); +#500031 = DIRECTION('',(0.,-1.,0.)); +#500032 = ORIENTED_EDGE('',*,*,#500033,.T.); +#500033 = EDGE_CURVE('',#500026,#500034,#500036,.T.); +#500034 = VERTEX_POINT('',#500035); +#500035 = CARTESIAN_POINT('',(149.9125,-117.3,-5.E-02)); +#500036 = CIRCLE('',#500037,0.150000058649); +#500037 = AXIS2_PLACEMENT_3D('',#500038,#500039,#500040); +#500038 = CARTESIAN_POINT('',(149.91250005864,-117.1499999413,-5.E-02)); +#500039 = DIRECTION('',(0.,0.,1.)); +#500040 = DIRECTION('',(-1.,-3.90995408976E-07,0.)); +#500041 = ORIENTED_EDGE('',*,*,#500042,.T.); +#500042 = EDGE_CURVE('',#500034,#500043,#500045,.T.); +#500043 = VERTEX_POINT('',#500044); +#500044 = CARTESIAN_POINT('',(151.0875,-117.3,-5.E-02)); +#500045 = LINE('',#500046,#500047); +#500046 = CARTESIAN_POINT('',(149.9125,-117.3,-5.E-02)); +#500047 = VECTOR('',#500048,1.); +#500048 = DIRECTION('',(1.,0.,0.)); +#500049 = ORIENTED_EDGE('',*,*,#500050,.T.); +#500050 = EDGE_CURVE('',#500043,#500051,#500053,.T.); +#500051 = VERTEX_POINT('',#500052); +#500052 = CARTESIAN_POINT('',(151.2375,-117.15,-5.E-02)); +#500053 = CIRCLE('',#500054,0.150000058649); +#500054 = AXIS2_PLACEMENT_3D('',#500055,#500056,#500057); +#500055 = CARTESIAN_POINT('',(151.08749994135,-117.1499999413,-5.E-02)); +#500056 = DIRECTION('',(0.,0.,1.)); +#500057 = DIRECTION('',(3.90995219498E-07,-1.,0.)); +#500058 = ORIENTED_EDGE('',*,*,#500059,.T.); +#500059 = EDGE_CURVE('',#500051,#499998,#500060,.T.); +#500060 = LINE('',#500061,#500062); +#500061 = CARTESIAN_POINT('',(151.2375,-117.15,-5.E-02)); +#500062 = VECTOR('',#500063,1.); +#500063 = DIRECTION('',(0.,1.,0.)); +#500064 = FACE_BOUND('',#500065,.T.); +#500065 = EDGE_LOOP('',(#500066,#500077,#500085,#500094,#500102,#500111, + #500119,#500128)); +#500066 = ORIENTED_EDGE('',*,*,#500067,.T.); +#500067 = EDGE_CURVE('',#500068,#500070,#500072,.T.); +#500068 = VERTEX_POINT('',#500069); +#500069 = CARTESIAN_POINT('',(135.81,-116.86,-5.E-02)); +#500070 = VERTEX_POINT('',#500071); +#500071 = CARTESIAN_POINT('',(135.67,-116.72,-5.E-02)); +#500072 = CIRCLE('',#500073,0.139999827125); +#500073 = AXIS2_PLACEMENT_3D('',#500074,#500075,#500076); +#500074 = CARTESIAN_POINT('',(135.67000017287,-116.8599998271,-5.E-02)); +#500075 = DIRECTION('',(0.,0.,1.)); +#500076 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#500077 = ORIENTED_EDGE('',*,*,#500078,.T.); +#500078 = EDGE_CURVE('',#500070,#500079,#500081,.T.); +#500079 = VERTEX_POINT('',#500080); +#500080 = CARTESIAN_POINT('',(135.33,-116.72,-5.E-02)); +#500081 = LINE('',#500082,#500083); +#500082 = CARTESIAN_POINT('',(135.67,-116.72,-5.E-02)); +#500083 = VECTOR('',#500084,1.); +#500084 = DIRECTION('',(-1.,0.,0.)); +#500085 = ORIENTED_EDGE('',*,*,#500086,.T.); +#500086 = EDGE_CURVE('',#500079,#500087,#500089,.T.); +#500087 = VERTEX_POINT('',#500088); +#500088 = CARTESIAN_POINT('',(135.19,-116.86,-5.E-02)); +#500089 = CIRCLE('',#500090,0.139999827125); +#500090 = AXIS2_PLACEMENT_3D('',#500091,#500092,#500093); +#500091 = CARTESIAN_POINT('',(135.32999982712,-116.8599998271,-5.E-02)); +#500092 = DIRECTION('',(0.,0.,1.)); +#500093 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#500094 = ORIENTED_EDGE('',*,*,#500095,.T.); +#500095 = EDGE_CURVE('',#500087,#500096,#500098,.T.); +#500096 = VERTEX_POINT('',#500097); +#500097 = CARTESIAN_POINT('',(135.19,-117.14,-5.E-02)); +#500098 = LINE('',#500099,#500100); +#500099 = CARTESIAN_POINT('',(135.19,-116.86,-5.E-02)); +#500100 = VECTOR('',#500101,1.); +#500101 = DIRECTION('',(0.,-1.,0.)); +#500102 = ORIENTED_EDGE('',*,*,#500103,.T.); +#500103 = EDGE_CURVE('',#500096,#500104,#500106,.T.); +#500104 = VERTEX_POINT('',#500105); +#500105 = CARTESIAN_POINT('',(135.33,-117.28,-5.E-02)); +#500106 = CIRCLE('',#500107,0.139999827125); +#500107 = AXIS2_PLACEMENT_3D('',#500108,#500109,#500110); +#500108 = CARTESIAN_POINT('',(135.32999982712,-117.1400001728,-5.E-02)); +#500109 = DIRECTION('',(0.,0.,1.)); +#500110 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#500111 = ORIENTED_EDGE('',*,*,#500112,.T.); +#500112 = EDGE_CURVE('',#500104,#500113,#500115,.T.); +#500113 = VERTEX_POINT('',#500114); +#500114 = CARTESIAN_POINT('',(135.67,-117.28,-5.E-02)); +#500115 = LINE('',#500116,#500117); +#500116 = CARTESIAN_POINT('',(135.33,-117.28,-5.E-02)); +#500117 = VECTOR('',#500118,1.); +#500118 = DIRECTION('',(1.,0.,0.)); +#500119 = ORIENTED_EDGE('',*,*,#500120,.T.); +#500120 = EDGE_CURVE('',#500113,#500121,#500123,.T.); +#500121 = VERTEX_POINT('',#500122); +#500122 = CARTESIAN_POINT('',(135.81,-117.14,-5.E-02)); +#500123 = CIRCLE('',#500124,0.139999827125); +#500124 = AXIS2_PLACEMENT_3D('',#500125,#500126,#500127); +#500125 = CARTESIAN_POINT('',(135.67000017287,-117.1400001728,-5.E-02)); +#500126 = DIRECTION('',(0.,0.,1.)); +#500127 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#500128 = ORIENTED_EDGE('',*,*,#500129,.T.); +#500129 = EDGE_CURVE('',#500121,#500068,#500130,.T.); +#500130 = LINE('',#500131,#500132); +#500131 = CARTESIAN_POINT('',(135.81,-117.14,-5.E-02)); +#500132 = VECTOR('',#500133,1.); +#500133 = DIRECTION('',(0.,1.,0.)); +#500134 = FACE_BOUND('',#500135,.T.); +#500135 = EDGE_LOOP('',(#500136,#500147,#500155,#500164,#500172,#500181, + #500189,#500198)); +#500136 = ORIENTED_EDGE('',*,*,#500137,.T.); +#500137 = EDGE_CURVE('',#500138,#500140,#500142,.T.); +#500138 = VERTEX_POINT('',#500139); +#500139 = CARTESIAN_POINT('',(149.3625,-115.9,-5.E-02)); +#500140 = VERTEX_POINT('',#500141); +#500141 = CARTESIAN_POINT('',(149.2125,-115.75,-5.E-02)); +#500142 = CIRCLE('',#500143,0.150000058649); +#500143 = AXIS2_PLACEMENT_3D('',#500144,#500145,#500146); +#500144 = CARTESIAN_POINT('',(149.21249994135,-115.9000000586,-5.E-02)); +#500145 = DIRECTION('',(0.,0.,1.)); +#500146 = DIRECTION('',(1.,3.909953142369E-07,-0.)); +#500147 = ORIENTED_EDGE('',*,*,#500148,.T.); +#500148 = EDGE_CURVE('',#500140,#500149,#500151,.T.); +#500149 = VERTEX_POINT('',#500150); +#500150 = CARTESIAN_POINT('',(148.0375,-115.75,-5.E-02)); +#500151 = LINE('',#500152,#500153); +#500152 = CARTESIAN_POINT('',(149.2125,-115.75,-5.E-02)); +#500153 = VECTOR('',#500154,1.); +#500154 = DIRECTION('',(-1.,0.,0.)); +#500155 = ORIENTED_EDGE('',*,*,#500156,.T.); +#500156 = EDGE_CURVE('',#500149,#500157,#500159,.T.); +#500157 = VERTEX_POINT('',#500158); +#500158 = CARTESIAN_POINT('',(147.8875,-115.9,-5.E-02)); +#500159 = CIRCLE('',#500160,0.150000058649); +#500160 = AXIS2_PLACEMENT_3D('',#500161,#500162,#500163); +#500161 = CARTESIAN_POINT('',(148.03750005864,-115.9000000586,-5.E-02)); +#500162 = DIRECTION('',(0.,0.,1.)); +#500163 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#500164 = ORIENTED_EDGE('',*,*,#500165,.T.); +#500165 = EDGE_CURVE('',#500157,#500166,#500168,.T.); +#500166 = VERTEX_POINT('',#500167); +#500167 = CARTESIAN_POINT('',(147.8875,-116.2,-5.E-02)); +#500168 = LINE('',#500169,#500170); +#500169 = CARTESIAN_POINT('',(147.8875,-115.9,-5.E-02)); +#500170 = VECTOR('',#500171,1.); +#500171 = DIRECTION('',(0.,-1.,0.)); +#500172 = ORIENTED_EDGE('',*,*,#500173,.T.); +#500173 = EDGE_CURVE('',#500166,#500174,#500176,.T.); +#500174 = VERTEX_POINT('',#500175); +#500175 = CARTESIAN_POINT('',(148.0375,-116.35,-5.E-02)); +#500176 = CIRCLE('',#500177,0.150000058649); +#500177 = AXIS2_PLACEMENT_3D('',#500178,#500179,#500180); +#500178 = CARTESIAN_POINT('',(148.03750005864,-116.1999999413,-5.E-02)); +#500179 = DIRECTION('',(0.,0.,1.)); +#500180 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#500181 = ORIENTED_EDGE('',*,*,#500182,.T.); +#500182 = EDGE_CURVE('',#500174,#500183,#500185,.T.); +#500183 = VERTEX_POINT('',#500184); +#500184 = CARTESIAN_POINT('',(149.2125,-116.35,-5.E-02)); +#500185 = LINE('',#500186,#500187); +#500186 = CARTESIAN_POINT('',(148.0375,-116.35,-5.E-02)); +#500187 = VECTOR('',#500188,1.); +#500188 = DIRECTION('',(1.,0.,0.)); +#500189 = ORIENTED_EDGE('',*,*,#500190,.T.); +#500190 = EDGE_CURVE('',#500183,#500191,#500193,.T.); +#500191 = VERTEX_POINT('',#500192); +#500192 = CARTESIAN_POINT('',(149.3625,-116.2,-5.E-02)); +#500193 = CIRCLE('',#500194,0.150000058649); +#500194 = AXIS2_PLACEMENT_3D('',#500195,#500196,#500197); +#500195 = CARTESIAN_POINT('',(149.21249994135,-116.1999999413,-5.E-02)); +#500196 = DIRECTION('',(0.,0.,1.)); +#500197 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#500198 = ORIENTED_EDGE('',*,*,#500199,.T.); +#500199 = EDGE_CURVE('',#500191,#500138,#500200,.T.); +#500200 = LINE('',#500201,#500202); +#500201 = CARTESIAN_POINT('',(149.3625,-116.2,-5.E-02)); +#500202 = VECTOR('',#500203,1.); +#500203 = DIRECTION('',(0.,1.,0.)); +#500204 = FACE_BOUND('',#500205,.T.); +#500205 = EDGE_LOOP('',(#500206,#500217,#500225,#500234,#500242,#500251, + #500259,#500268)); +#500206 = ORIENTED_EDGE('',*,*,#500207,.T.); +#500207 = EDGE_CURVE('',#500208,#500210,#500212,.T.); +#500208 = VERTEX_POINT('',#500209); +#500209 = CARTESIAN_POINT('',(122.845,-115.625,-5.E-02)); +#500210 = VERTEX_POINT('',#500211); +#500211 = CARTESIAN_POINT('',(122.71,-115.49,-5.E-02)); +#500212 = CIRCLE('',#500213,0.135001418495); +#500213 = AXIS2_PLACEMENT_3D('',#500214,#500215,#500216); +#500214 = CARTESIAN_POINT('',(122.70999858151,-115.6250014184,-5.E-02)); +#500215 = DIRECTION('',(0.,0.,1.)); +#500216 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#500217 = ORIENTED_EDGE('',*,*,#500218,.T.); +#500218 = EDGE_CURVE('',#500210,#500219,#500221,.T.); +#500219 = VERTEX_POINT('',#500220); +#500220 = CARTESIAN_POINT('',(122.34,-115.49,-5.E-02)); +#500221 = LINE('',#500222,#500223); +#500222 = CARTESIAN_POINT('',(122.71,-115.49,-5.E-02)); +#500223 = VECTOR('',#500224,1.); +#500224 = DIRECTION('',(-1.,0.,0.)); +#500225 = ORIENTED_EDGE('',*,*,#500226,.T.); +#500226 = EDGE_CURVE('',#500219,#500227,#500229,.T.); +#500227 = VERTEX_POINT('',#500228); +#500228 = CARTESIAN_POINT('',(122.205,-115.625,-5.E-02)); +#500229 = CIRCLE('',#500230,0.135001418495); +#500230 = AXIS2_PLACEMENT_3D('',#500231,#500232,#500233); +#500231 = CARTESIAN_POINT('',(122.34000141848,-115.6250014184,-5.E-02)); +#500232 = DIRECTION('',(0.,0.,1.)); +#500233 = DIRECTION('',(-1.050720641103E-05,0.999999999945,0.)); +#500234 = ORIENTED_EDGE('',*,*,#500235,.T.); +#500235 = EDGE_CURVE('',#500227,#500236,#500238,.T.); +#500236 = VERTEX_POINT('',#500237); +#500237 = CARTESIAN_POINT('',(122.205,-115.895,-5.E-02)); +#500238 = LINE('',#500239,#500240); +#500239 = CARTESIAN_POINT('',(122.205,-115.625,-5.E-02)); +#500240 = VECTOR('',#500241,1.); +#500241 = DIRECTION('',(0.,-1.,0.)); +#500242 = ORIENTED_EDGE('',*,*,#500243,.T.); +#500243 = EDGE_CURVE('',#500236,#500244,#500246,.T.); +#500244 = VERTEX_POINT('',#500245); +#500245 = CARTESIAN_POINT('',(122.34,-116.03,-5.E-02)); +#500246 = CIRCLE('',#500247,0.135001418495); +#500247 = AXIS2_PLACEMENT_3D('',#500248,#500249,#500250); +#500248 = CARTESIAN_POINT('',(122.34000141848,-115.8949985815,-5.E-02)); +#500249 = DIRECTION('',(0.,0.,1.)); +#500250 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#500251 = ORIENTED_EDGE('',*,*,#500252,.T.); +#500252 = EDGE_CURVE('',#500244,#500253,#500255,.T.); +#500253 = VERTEX_POINT('',#500254); +#500254 = CARTESIAN_POINT('',(122.71,-116.03,-5.E-02)); +#500255 = LINE('',#500256,#500257); +#500256 = CARTESIAN_POINT('',(122.34,-116.03,-5.E-02)); +#500257 = VECTOR('',#500258,1.); +#500258 = DIRECTION('',(1.,0.,0.)); +#500259 = ORIENTED_EDGE('',*,*,#500260,.T.); +#500260 = EDGE_CURVE('',#500253,#500261,#500263,.T.); +#500261 = VERTEX_POINT('',#500262); +#500262 = CARTESIAN_POINT('',(122.845,-115.895,-5.E-02)); +#500263 = CIRCLE('',#500264,0.135001418495); +#500264 = AXIS2_PLACEMENT_3D('',#500265,#500266,#500267); +#500265 = CARTESIAN_POINT('',(122.70999858151,-115.8949985815,-5.E-02)); +#500266 = DIRECTION('',(0.,0.,1.)); +#500267 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#500268 = ORIENTED_EDGE('',*,*,#500269,.T.); +#500269 = EDGE_CURVE('',#500261,#500208,#500270,.T.); +#500270 = LINE('',#500271,#500272); +#500271 = CARTESIAN_POINT('',(122.845,-115.895,-5.E-02)); +#500272 = VECTOR('',#500273,1.); +#500273 = DIRECTION('',(0.,1.,0.)); +#500274 = FACE_BOUND('',#500275,.T.); +#500275 = EDGE_LOOP('',(#500276,#500287,#500295,#500304,#500312,#500321, + #500329,#500338)); +#500276 = ORIENTED_EDGE('',*,*,#500277,.T.); +#500277 = EDGE_CURVE('',#500278,#500280,#500282,.T.); +#500278 = VERTEX_POINT('',#500279); +#500279 = CARTESIAN_POINT('',(152.12,-114.725,-5.E-02)); +#500280 = VERTEX_POINT('',#500281); +#500281 = CARTESIAN_POINT('',(151.985,-114.59,-5.E-02)); +#500282 = CIRCLE('',#500283,0.135001418495); +#500283 = AXIS2_PLACEMENT_3D('',#500284,#500285,#500286); +#500284 = CARTESIAN_POINT('',(151.98499858151,-114.7250014184,-5.E-02)); +#500285 = DIRECTION('',(0.,0.,1.)); +#500286 = DIRECTION('',(0.999999999945,1.050720672682E-05,-0.)); +#500287 = ORIENTED_EDGE('',*,*,#500288,.T.); +#500288 = EDGE_CURVE('',#500280,#500289,#500291,.T.); +#500289 = VERTEX_POINT('',#500290); +#500290 = CARTESIAN_POINT('',(151.615,-114.59,-5.E-02)); +#500291 = LINE('',#500292,#500293); +#500292 = CARTESIAN_POINT('',(151.985,-114.59,-5.E-02)); +#500293 = VECTOR('',#500294,1.); +#500294 = DIRECTION('',(-1.,0.,0.)); +#500295 = ORIENTED_EDGE('',*,*,#500296,.T.); +#500296 = EDGE_CURVE('',#500289,#500297,#500299,.T.); +#500297 = VERTEX_POINT('',#500298); +#500298 = CARTESIAN_POINT('',(151.48,-114.725,-5.E-02)); +#500299 = CIRCLE('',#500300,0.135001418495); +#500300 = AXIS2_PLACEMENT_3D('',#500301,#500302,#500303); +#500301 = CARTESIAN_POINT('',(151.61500141848,-114.7250014184,-5.E-02)); +#500302 = DIRECTION('',(0.,0.,1.)); +#500303 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#500304 = ORIENTED_EDGE('',*,*,#500305,.T.); +#500305 = EDGE_CURVE('',#500297,#500306,#500308,.T.); +#500306 = VERTEX_POINT('',#500307); +#500307 = CARTESIAN_POINT('',(151.48,-114.995,-5.E-02)); +#500308 = LINE('',#500309,#500310); +#500309 = CARTESIAN_POINT('',(151.48,-114.725,-5.E-02)); +#500310 = VECTOR('',#500311,1.); +#500311 = DIRECTION('',(0.,-1.,0.)); +#500312 = ORIENTED_EDGE('',*,*,#500313,.T.); +#500313 = EDGE_CURVE('',#500306,#500314,#500316,.T.); +#500314 = VERTEX_POINT('',#500315); +#500315 = CARTESIAN_POINT('',(151.615,-115.13,-5.E-02)); +#500316 = CIRCLE('',#500317,0.135001418495); +#500317 = AXIS2_PLACEMENT_3D('',#500318,#500319,#500320); +#500318 = CARTESIAN_POINT('',(151.61500141848,-114.9949985815,-5.E-02)); +#500319 = DIRECTION('',(0.,0.,1.)); +#500320 = DIRECTION('',(-0.999999999945,-1.050720662155E-05,0.)); +#500321 = ORIENTED_EDGE('',*,*,#500322,.T.); +#500322 = EDGE_CURVE('',#500314,#500323,#500325,.T.); +#500323 = VERTEX_POINT('',#500324); +#500324 = CARTESIAN_POINT('',(151.985,-115.13,-5.E-02)); +#500325 = LINE('',#500326,#500327); +#500326 = CARTESIAN_POINT('',(151.615,-115.13,-5.E-02)); +#500327 = VECTOR('',#500328,1.); +#500328 = DIRECTION('',(1.,0.,0.)); +#500329 = ORIENTED_EDGE('',*,*,#500330,.T.); +#500330 = EDGE_CURVE('',#500323,#500331,#500333,.T.); +#500331 = VERTEX_POINT('',#500332); +#500332 = CARTESIAN_POINT('',(152.12,-114.995,-5.E-02)); +#500333 = CIRCLE('',#500334,0.135001418495); +#500334 = AXIS2_PLACEMENT_3D('',#500335,#500336,#500337); +#500335 = CARTESIAN_POINT('',(151.98499858151,-114.9949985815,-5.E-02)); +#500336 = DIRECTION('',(0.,0.,1.)); +#500337 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#500338 = ORIENTED_EDGE('',*,*,#500339,.T.); +#500339 = EDGE_CURVE('',#500331,#500278,#500340,.T.); +#500340 = LINE('',#500341,#500342); +#500341 = CARTESIAN_POINT('',(152.12,-114.995,-5.E-02)); +#500342 = VECTOR('',#500343,1.); +#500343 = DIRECTION('',(0.,1.,0.)); +#500344 = FACE_BOUND('',#500345,.T.); +#500345 = EDGE_LOOP('',(#500346,#500357,#500365,#500374,#500382,#500391, + #500399,#500408)); +#500346 = ORIENTED_EDGE('',*,*,#500347,.T.); +#500347 = EDGE_CURVE('',#500348,#500350,#500352,.T.); +#500348 = VERTEX_POINT('',#500349); +#500349 = CARTESIAN_POINT('',(122.845,-114.605,-5.E-02)); +#500350 = VERTEX_POINT('',#500351); +#500351 = CARTESIAN_POINT('',(122.71,-114.47,-5.E-02)); +#500352 = CIRCLE('',#500353,0.135001418495); +#500353 = AXIS2_PLACEMENT_3D('',#500354,#500355,#500356); +#500354 = CARTESIAN_POINT('',(122.70999858151,-114.6050014184,-5.E-02)); +#500355 = DIRECTION('',(0.,0.,1.)); +#500356 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#500357 = ORIENTED_EDGE('',*,*,#500358,.T.); +#500358 = EDGE_CURVE('',#500350,#500359,#500361,.T.); +#500359 = VERTEX_POINT('',#500360); +#500360 = CARTESIAN_POINT('',(122.34,-114.47,-5.E-02)); +#500361 = LINE('',#500362,#500363); +#500362 = CARTESIAN_POINT('',(122.71,-114.47,-5.E-02)); +#500363 = VECTOR('',#500364,1.); +#500364 = DIRECTION('',(-1.,0.,0.)); +#500365 = ORIENTED_EDGE('',*,*,#500366,.T.); +#500366 = EDGE_CURVE('',#500359,#500367,#500369,.T.); +#500367 = VERTEX_POINT('',#500368); +#500368 = CARTESIAN_POINT('',(122.205,-114.605,-5.E-02)); +#500369 = CIRCLE('',#500370,0.135001418495); +#500370 = AXIS2_PLACEMENT_3D('',#500371,#500372,#500373); +#500371 = CARTESIAN_POINT('',(122.34000141848,-114.6050014184,-5.E-02)); +#500372 = DIRECTION('',(0.,0.,1.)); +#500373 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#500374 = ORIENTED_EDGE('',*,*,#500375,.T.); +#500375 = EDGE_CURVE('',#500367,#500376,#500378,.T.); +#500376 = VERTEX_POINT('',#500377); +#500377 = CARTESIAN_POINT('',(122.205,-114.875,-5.E-02)); +#500378 = LINE('',#500379,#500380); +#500379 = CARTESIAN_POINT('',(122.205,-114.605,-5.E-02)); +#500380 = VECTOR('',#500381,1.); +#500381 = DIRECTION('',(0.,-1.,0.)); +#500382 = ORIENTED_EDGE('',*,*,#500383,.T.); +#500383 = EDGE_CURVE('',#500376,#500384,#500386,.T.); +#500384 = VERTEX_POINT('',#500385); +#500385 = CARTESIAN_POINT('',(122.34,-115.01,-5.E-02)); +#500386 = CIRCLE('',#500387,0.135001418495); +#500387 = AXIS2_PLACEMENT_3D('',#500388,#500389,#500390); +#500388 = CARTESIAN_POINT('',(122.34000141848,-114.8749985815,-5.E-02)); +#500389 = DIRECTION('',(0.,0.,1.)); +#500390 = DIRECTION('',(-0.999999999945,-1.050720641103E-05,0.)); +#500391 = ORIENTED_EDGE('',*,*,#500392,.T.); +#500392 = EDGE_CURVE('',#500384,#500393,#500395,.T.); +#500393 = VERTEX_POINT('',#500394); +#500394 = CARTESIAN_POINT('',(122.71,-115.01,-5.E-02)); +#500395 = LINE('',#500396,#500397); +#500396 = CARTESIAN_POINT('',(122.34,-115.01,-5.E-02)); +#500397 = VECTOR('',#500398,1.); +#500398 = DIRECTION('',(1.,0.,0.)); +#500399 = ORIENTED_EDGE('',*,*,#500400,.T.); +#500400 = EDGE_CURVE('',#500393,#500401,#500403,.T.); +#500401 = VERTEX_POINT('',#500402); +#500402 = CARTESIAN_POINT('',(122.845,-114.875,-5.E-02)); +#500403 = CIRCLE('',#500404,0.135001418495); +#500404 = AXIS2_PLACEMENT_3D('',#500405,#500406,#500407); +#500405 = CARTESIAN_POINT('',(122.70999858151,-114.8749985815,-5.E-02)); +#500406 = DIRECTION('',(0.,0.,1.)); +#500407 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#500408 = ORIENTED_EDGE('',*,*,#500409,.T.); +#500409 = EDGE_CURVE('',#500401,#500348,#500410,.T.); +#500410 = LINE('',#500411,#500412); +#500411 = CARTESIAN_POINT('',(122.845,-114.875,-5.E-02)); +#500412 = VECTOR('',#500413,1.); +#500413 = DIRECTION('',(0.,1.,0.)); +#500414 = FACE_BOUND('',#500415,.T.); +#500415 = EDGE_LOOP('',(#500416,#500427,#500435,#500444,#500452,#500461, + #500469,#500478)); +#500416 = ORIENTED_EDGE('',*,*,#500417,.T.); +#500417 = EDGE_CURVE('',#500418,#500420,#500422,.T.); +#500418 = VERTEX_POINT('',#500419); +#500419 = CARTESIAN_POINT('',(147.77,-114.315,-5.E-02)); +#500420 = VERTEX_POINT('',#500421); +#500421 = CARTESIAN_POINT('',(147.635,-114.18,-5.E-02)); +#500422 = CIRCLE('',#500423,0.135001418495); +#500423 = AXIS2_PLACEMENT_3D('',#500424,#500425,#500426); +#500424 = CARTESIAN_POINT('',(147.63499858151,-114.3150014184,-5.E-02)); +#500425 = DIRECTION('',(0.,0.,1.)); +#500426 = DIRECTION('',(0.999999999945,1.050720662155E-05,-0.)); +#500427 = ORIENTED_EDGE('',*,*,#500428,.T.); +#500428 = EDGE_CURVE('',#500420,#500429,#500431,.T.); +#500429 = VERTEX_POINT('',#500430); +#500430 = CARTESIAN_POINT('',(147.365,-114.18,-5.E-02)); +#500431 = LINE('',#500432,#500433); +#500432 = CARTESIAN_POINT('',(147.635,-114.18,-5.E-02)); +#500433 = VECTOR('',#500434,1.); +#500434 = DIRECTION('',(-1.,0.,0.)); +#500435 = ORIENTED_EDGE('',*,*,#500436,.T.); +#500436 = EDGE_CURVE('',#500429,#500437,#500439,.T.); +#500437 = VERTEX_POINT('',#500438); +#500438 = CARTESIAN_POINT('',(147.23,-114.315,-5.E-02)); +#500439 = CIRCLE('',#500440,0.135001418495); +#500440 = AXIS2_PLACEMENT_3D('',#500441,#500442,#500443); +#500441 = CARTESIAN_POINT('',(147.36500141848,-114.3150014184,-5.E-02)); +#500442 = DIRECTION('',(0.,0.,1.)); +#500443 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#500444 = ORIENTED_EDGE('',*,*,#500445,.T.); +#500445 = EDGE_CURVE('',#500437,#500446,#500448,.T.); +#500446 = VERTEX_POINT('',#500447); +#500447 = CARTESIAN_POINT('',(147.23,-114.685,-5.E-02)); +#500448 = LINE('',#500449,#500450); +#500449 = CARTESIAN_POINT('',(147.23,-114.315,-5.E-02)); +#500450 = VECTOR('',#500451,1.); +#500451 = DIRECTION('',(0.,-1.,0.)); +#500452 = ORIENTED_EDGE('',*,*,#500453,.T.); +#500453 = EDGE_CURVE('',#500446,#500454,#500456,.T.); +#500454 = VERTEX_POINT('',#500455); +#500455 = CARTESIAN_POINT('',(147.365,-114.82,-5.E-02)); +#500456 = CIRCLE('',#500457,0.135001418495); +#500457 = AXIS2_PLACEMENT_3D('',#500458,#500459,#500460); +#500458 = CARTESIAN_POINT('',(147.36500141848,-114.6849985815,-5.E-02)); +#500459 = DIRECTION('',(0.,0.,1.)); +#500460 = DIRECTION('',(-0.999999999945,-1.050720662155E-05,0.)); +#500461 = ORIENTED_EDGE('',*,*,#500462,.T.); +#500462 = EDGE_CURVE('',#500454,#500463,#500465,.T.); +#500463 = VERTEX_POINT('',#500464); +#500464 = CARTESIAN_POINT('',(147.635,-114.82,-5.E-02)); +#500465 = LINE('',#500466,#500467); +#500466 = CARTESIAN_POINT('',(147.365,-114.82,-5.E-02)); +#500467 = VECTOR('',#500468,1.); +#500468 = DIRECTION('',(1.,0.,0.)); +#500469 = ORIENTED_EDGE('',*,*,#500470,.T.); +#500470 = EDGE_CURVE('',#500463,#500471,#500473,.T.); +#500471 = VERTEX_POINT('',#500472); +#500472 = CARTESIAN_POINT('',(147.77,-114.685,-5.E-02)); +#500473 = CIRCLE('',#500474,0.135001418495); +#500474 = AXIS2_PLACEMENT_3D('',#500475,#500476,#500477); +#500475 = CARTESIAN_POINT('',(147.63499858151,-114.6849985815,-5.E-02)); +#500476 = DIRECTION('',(0.,0.,1.)); +#500477 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#500478 = ORIENTED_EDGE('',*,*,#500479,.T.); +#500479 = EDGE_CURVE('',#500471,#500418,#500480,.T.); +#500480 = LINE('',#500481,#500482); +#500481 = CARTESIAN_POINT('',(147.77,-114.685,-5.E-02)); +#500482 = VECTOR('',#500483,1.); +#500483 = DIRECTION('',(0.,1.,0.)); +#500484 = FACE_BOUND('',#500485,.T.); +#500485 = EDGE_LOOP('',(#500486,#500497,#500505,#500514,#500522,#500531, + #500539,#500548)); +#500486 = ORIENTED_EDGE('',*,*,#500487,.T.); +#500487 = EDGE_CURVE('',#500488,#500490,#500492,.T.); +#500488 = VERTEX_POINT('',#500489); +#500489 = CARTESIAN_POINT('',(148.79,-114.315,-5.E-02)); +#500490 = VERTEX_POINT('',#500491); +#500491 = CARTESIAN_POINT('',(148.655,-114.18,-5.E-02)); +#500492 = CIRCLE('',#500493,0.135001418495); +#500493 = AXIS2_PLACEMENT_3D('',#500494,#500495,#500496); +#500494 = CARTESIAN_POINT('',(148.65499858151,-114.3150014184,-5.E-02)); +#500495 = DIRECTION('',(0.,0.,1.)); +#500496 = DIRECTION('',(0.999999999945,1.050720641103E-05,-0.)); +#500497 = ORIENTED_EDGE('',*,*,#500498,.T.); +#500498 = EDGE_CURVE('',#500490,#500499,#500501,.T.); +#500499 = VERTEX_POINT('',#500500); +#500500 = CARTESIAN_POINT('',(148.385,-114.18,-5.E-02)); +#500501 = LINE('',#500502,#500503); +#500502 = CARTESIAN_POINT('',(148.655,-114.18,-5.E-02)); +#500503 = VECTOR('',#500504,1.); +#500504 = DIRECTION('',(-1.,0.,0.)); +#500505 = ORIENTED_EDGE('',*,*,#500506,.T.); +#500506 = EDGE_CURVE('',#500499,#500507,#500509,.T.); +#500507 = VERTEX_POINT('',#500508); +#500508 = CARTESIAN_POINT('',(148.25,-114.315,-5.E-02)); +#500509 = CIRCLE('',#500510,0.135001418495); +#500510 = AXIS2_PLACEMENT_3D('',#500511,#500512,#500513); +#500511 = CARTESIAN_POINT('',(148.38500141848,-114.3150014184,-5.E-02)); +#500512 = DIRECTION('',(0.,0.,1.)); +#500513 = DIRECTION('',(-1.050720672682E-05,0.999999999945,0.)); +#500514 = ORIENTED_EDGE('',*,*,#500515,.T.); +#500515 = EDGE_CURVE('',#500507,#500516,#500518,.T.); +#500516 = VERTEX_POINT('',#500517); +#500517 = CARTESIAN_POINT('',(148.25,-114.685,-5.E-02)); +#500518 = LINE('',#500519,#500520); +#500519 = CARTESIAN_POINT('',(148.25,-114.315,-5.E-02)); +#500520 = VECTOR('',#500521,1.); +#500521 = DIRECTION('',(0.,-1.,0.)); +#500522 = ORIENTED_EDGE('',*,*,#500523,.T.); +#500523 = EDGE_CURVE('',#500516,#500524,#500526,.T.); +#500524 = VERTEX_POINT('',#500525); +#500525 = CARTESIAN_POINT('',(148.385,-114.82,-5.E-02)); +#500526 = CIRCLE('',#500527,0.135001418495); +#500527 = AXIS2_PLACEMENT_3D('',#500528,#500529,#500530); +#500528 = CARTESIAN_POINT('',(148.38500141848,-114.6849985815,-5.E-02)); +#500529 = DIRECTION('',(0.,0.,1.)); +#500530 = DIRECTION('',(-0.999999999945,-1.050720672682E-05,0.)); +#500531 = ORIENTED_EDGE('',*,*,#500532,.T.); +#500532 = EDGE_CURVE('',#500524,#500533,#500535,.T.); +#500533 = VERTEX_POINT('',#500534); +#500534 = CARTESIAN_POINT('',(148.655,-114.82,-5.E-02)); +#500535 = LINE('',#500536,#500537); +#500536 = CARTESIAN_POINT('',(148.385,-114.82,-5.E-02)); +#500537 = VECTOR('',#500538,1.); +#500538 = DIRECTION('',(1.,0.,0.)); +#500539 = ORIENTED_EDGE('',*,*,#500540,.T.); +#500540 = EDGE_CURVE('',#500533,#500541,#500543,.T.); +#500541 = VERTEX_POINT('',#500542); +#500542 = CARTESIAN_POINT('',(148.79,-114.685,-5.E-02)); +#500543 = CIRCLE('',#500544,0.135001418495); +#500544 = AXIS2_PLACEMENT_3D('',#500545,#500546,#500547); +#500545 = CARTESIAN_POINT('',(148.65499858151,-114.6849985815,-5.E-02)); +#500546 = DIRECTION('',(0.,0.,1.)); +#500547 = DIRECTION('',(1.050720630576E-05,-0.999999999945,0.)); +#500548 = ORIENTED_EDGE('',*,*,#500549,.T.); +#500549 = EDGE_CURVE('',#500541,#500488,#500550,.T.); +#500550 = LINE('',#500551,#500552); +#500551 = CARTESIAN_POINT('',(148.79,-114.685,-5.E-02)); +#500552 = VECTOR('',#500553,1.); +#500553 = DIRECTION('',(0.,1.,0.)); +#500554 = FACE_BOUND('',#500555,.T.); +#500555 = EDGE_LOOP('',(#500556,#500567,#500575,#500584,#500592,#500601, + #500609,#500618)); +#500556 = ORIENTED_EDGE('',*,*,#500557,.T.); +#500557 = EDGE_CURVE('',#500558,#500560,#500562,.T.); +#500558 = VERTEX_POINT('',#500559); +#500559 = CARTESIAN_POINT('',(152.12,-113.705,-5.E-02)); +#500560 = VERTEX_POINT('',#500561); +#500561 = CARTESIAN_POINT('',(151.985,-113.57,-5.E-02)); +#500562 = CIRCLE('',#500563,0.135001418495); +#500563 = AXIS2_PLACEMENT_3D('',#500564,#500565,#500566); +#500564 = CARTESIAN_POINT('',(151.98499858151,-113.7050014184,-5.E-02)); +#500565 = DIRECTION('',(0.,0.,1.)); +#500566 = DIRECTION('',(0.999999999945,1.050720672682E-05,-0.)); +#500567 = ORIENTED_EDGE('',*,*,#500568,.T.); +#500568 = EDGE_CURVE('',#500560,#500569,#500571,.T.); +#500569 = VERTEX_POINT('',#500570); +#500570 = CARTESIAN_POINT('',(151.615,-113.57,-5.E-02)); +#500571 = LINE('',#500572,#500573); +#500572 = CARTESIAN_POINT('',(151.985,-113.57,-5.E-02)); +#500573 = VECTOR('',#500574,1.); +#500574 = DIRECTION('',(-1.,0.,0.)); +#500575 = ORIENTED_EDGE('',*,*,#500576,.T.); +#500576 = EDGE_CURVE('',#500569,#500577,#500579,.T.); +#500577 = VERTEX_POINT('',#500578); +#500578 = CARTESIAN_POINT('',(151.48,-113.705,-5.E-02)); +#500579 = CIRCLE('',#500580,0.135001418495); +#500580 = AXIS2_PLACEMENT_3D('',#500581,#500582,#500583); +#500581 = CARTESIAN_POINT('',(151.61500141848,-113.7050014184,-5.E-02)); +#500582 = DIRECTION('',(0.,0.,1.)); +#500583 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#500584 = ORIENTED_EDGE('',*,*,#500585,.T.); +#500585 = EDGE_CURVE('',#500577,#500586,#500588,.T.); +#500586 = VERTEX_POINT('',#500587); +#500587 = CARTESIAN_POINT('',(151.48,-113.975,-5.E-02)); +#500588 = LINE('',#500589,#500590); +#500589 = CARTESIAN_POINT('',(151.48,-113.705,-5.E-02)); +#500590 = VECTOR('',#500591,1.); +#500591 = DIRECTION('',(0.,-1.,0.)); +#500592 = ORIENTED_EDGE('',*,*,#500593,.T.); +#500593 = EDGE_CURVE('',#500586,#500594,#500596,.T.); +#500594 = VERTEX_POINT('',#500595); +#500595 = CARTESIAN_POINT('',(151.615,-114.11,-5.E-02)); +#500596 = CIRCLE('',#500597,0.135001418495); +#500597 = AXIS2_PLACEMENT_3D('',#500598,#500599,#500600); +#500598 = CARTESIAN_POINT('',(151.61500141848,-113.9749985815,-5.E-02)); +#500599 = DIRECTION('',(0.,0.,1.)); +#500600 = DIRECTION('',(-0.999999999945,-1.050720662155E-05,0.)); +#500601 = ORIENTED_EDGE('',*,*,#500602,.T.); +#500602 = EDGE_CURVE('',#500594,#500603,#500605,.T.); +#500603 = VERTEX_POINT('',#500604); +#500604 = CARTESIAN_POINT('',(151.985,-114.11,-5.E-02)); +#500605 = LINE('',#500606,#500607); +#500606 = CARTESIAN_POINT('',(151.615,-114.11,-5.E-02)); +#500607 = VECTOR('',#500608,1.); +#500608 = DIRECTION('',(1.,0.,0.)); +#500609 = ORIENTED_EDGE('',*,*,#500610,.T.); +#500610 = EDGE_CURVE('',#500603,#500611,#500613,.T.); +#500611 = VERTEX_POINT('',#500612); +#500612 = CARTESIAN_POINT('',(152.12,-113.975,-5.E-02)); +#500613 = CIRCLE('',#500614,0.135001418495); +#500614 = AXIS2_PLACEMENT_3D('',#500615,#500616,#500617); +#500615 = CARTESIAN_POINT('',(151.98499858151,-113.9749985815,-5.E-02)); +#500616 = DIRECTION('',(0.,0.,1.)); +#500617 = DIRECTION('',(1.050720672682E-05,-0.999999999945,0.)); +#500618 = ORIENTED_EDGE('',*,*,#500619,.T.); +#500619 = EDGE_CURVE('',#500611,#500558,#500620,.T.); +#500620 = LINE('',#500621,#500622); +#500621 = CARTESIAN_POINT('',(152.12,-113.975,-5.E-02)); +#500622 = VECTOR('',#500623,1.); +#500623 = DIRECTION('',(0.,1.,0.)); +#500624 = FACE_BOUND('',#500625,.T.); +#500625 = EDGE_LOOP('',(#500626,#500637,#500645,#500654,#500662,#500671, + #500679,#500688)); +#500626 = ORIENTED_EDGE('',*,*,#500627,.T.); +#500627 = EDGE_CURVE('',#500628,#500630,#500632,.T.); +#500628 = VERTEX_POINT('',#500629); +#500629 = CARTESIAN_POINT('',(122.845,-113.625,-5.E-02)); +#500630 = VERTEX_POINT('',#500631); +#500631 = CARTESIAN_POINT('',(122.71,-113.49,-5.E-02)); +#500632 = CIRCLE('',#500633,0.135001418495); +#500633 = AXIS2_PLACEMENT_3D('',#500634,#500635,#500636); +#500634 = CARTESIAN_POINT('',(122.70999858151,-113.6250014184,-5.E-02)); +#500635 = DIRECTION('',(0.,0.,1.)); +#500636 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#500637 = ORIENTED_EDGE('',*,*,#500638,.T.); +#500638 = EDGE_CURVE('',#500630,#500639,#500641,.T.); +#500639 = VERTEX_POINT('',#500640); +#500640 = CARTESIAN_POINT('',(122.34,-113.49,-5.E-02)); +#500641 = LINE('',#500642,#500643); +#500642 = CARTESIAN_POINT('',(122.71,-113.49,-5.E-02)); +#500643 = VECTOR('',#500644,1.); +#500644 = DIRECTION('',(-1.,0.,0.)); +#500645 = ORIENTED_EDGE('',*,*,#500646,.T.); +#500646 = EDGE_CURVE('',#500639,#500647,#500649,.T.); +#500647 = VERTEX_POINT('',#500648); +#500648 = CARTESIAN_POINT('',(122.205,-113.625,-5.E-02)); +#500649 = CIRCLE('',#500650,0.135001418495); +#500650 = AXIS2_PLACEMENT_3D('',#500651,#500652,#500653); +#500651 = CARTESIAN_POINT('',(122.34000141848,-113.6250014184,-5.E-02)); +#500652 = DIRECTION('',(0.,0.,1.)); +#500653 = DIRECTION('',(-1.050720641103E-05,0.999999999945,0.)); +#500654 = ORIENTED_EDGE('',*,*,#500655,.T.); +#500655 = EDGE_CURVE('',#500647,#500656,#500658,.T.); +#500656 = VERTEX_POINT('',#500657); +#500657 = CARTESIAN_POINT('',(122.205,-113.895,-5.E-02)); +#500658 = LINE('',#500659,#500660); +#500659 = CARTESIAN_POINT('',(122.205,-113.625,-5.E-02)); +#500660 = VECTOR('',#500661,1.); +#500661 = DIRECTION('',(0.,-1.,0.)); +#500662 = ORIENTED_EDGE('',*,*,#500663,.T.); +#500663 = EDGE_CURVE('',#500656,#500664,#500666,.T.); +#500664 = VERTEX_POINT('',#500665); +#500665 = CARTESIAN_POINT('',(122.34,-114.03,-5.E-02)); +#500666 = CIRCLE('',#500667,0.135001418495); +#500667 = AXIS2_PLACEMENT_3D('',#500668,#500669,#500670); +#500668 = CARTESIAN_POINT('',(122.34000141848,-113.8949985815,-5.E-02)); +#500669 = DIRECTION('',(0.,0.,1.)); +#500670 = DIRECTION('',(-0.999999999945,-1.050720651629E-05,0.)); +#500671 = ORIENTED_EDGE('',*,*,#500672,.T.); +#500672 = EDGE_CURVE('',#500664,#500673,#500675,.T.); +#500673 = VERTEX_POINT('',#500674); +#500674 = CARTESIAN_POINT('',(122.71,-114.03,-5.E-02)); +#500675 = LINE('',#500676,#500677); +#500676 = CARTESIAN_POINT('',(122.34,-114.03,-5.E-02)); +#500677 = VECTOR('',#500678,1.); +#500678 = DIRECTION('',(1.,0.,0.)); +#500679 = ORIENTED_EDGE('',*,*,#500680,.T.); +#500680 = EDGE_CURVE('',#500673,#500681,#500683,.T.); +#500681 = VERTEX_POINT('',#500682); +#500682 = CARTESIAN_POINT('',(122.845,-113.895,-5.E-02)); +#500683 = CIRCLE('',#500684,0.135001418495); +#500684 = AXIS2_PLACEMENT_3D('',#500685,#500686,#500687); +#500685 = CARTESIAN_POINT('',(122.70999858151,-113.8949985815,-5.E-02)); +#500686 = DIRECTION('',(0.,0.,1.)); +#500687 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#500688 = ORIENTED_EDGE('',*,*,#500689,.T.); +#500689 = EDGE_CURVE('',#500681,#500628,#500690,.T.); +#500690 = LINE('',#500691,#500692); +#500691 = CARTESIAN_POINT('',(122.845,-113.895,-5.E-02)); +#500692 = VECTOR('',#500693,1.); +#500693 = DIRECTION('',(0.,1.,0.)); +#500694 = FACE_BOUND('',#500695,.T.); +#500695 = EDGE_LOOP('',(#500696,#500707,#500715,#500724,#500732,#500741, + #500749,#500758)); +#500696 = ORIENTED_EDGE('',*,*,#500697,.T.); +#500697 = EDGE_CURVE('',#500698,#500700,#500702,.T.); +#500698 = VERTEX_POINT('',#500699); +#500699 = CARTESIAN_POINT('',(122.845,-112.605,-5.E-02)); +#500700 = VERTEX_POINT('',#500701); +#500701 = CARTESIAN_POINT('',(122.71,-112.47,-5.E-02)); +#500702 = CIRCLE('',#500703,0.135001418495); +#500703 = AXIS2_PLACEMENT_3D('',#500704,#500705,#500706); +#500704 = CARTESIAN_POINT('',(122.70999858151,-112.6050014184,-5.E-02)); +#500705 = DIRECTION('',(0.,0.,1.)); +#500706 = DIRECTION('',(0.999999999945,1.050720651629E-05,-0.)); +#500707 = ORIENTED_EDGE('',*,*,#500708,.T.); +#500708 = EDGE_CURVE('',#500700,#500709,#500711,.T.); +#500709 = VERTEX_POINT('',#500710); +#500710 = CARTESIAN_POINT('',(122.34,-112.47,-5.E-02)); +#500711 = LINE('',#500712,#500713); +#500712 = CARTESIAN_POINT('',(122.71,-112.47,-5.E-02)); +#500713 = VECTOR('',#500714,1.); +#500714 = DIRECTION('',(-1.,0.,0.)); +#500715 = ORIENTED_EDGE('',*,*,#500716,.T.); +#500716 = EDGE_CURVE('',#500709,#500717,#500719,.T.); +#500717 = VERTEX_POINT('',#500718); +#500718 = CARTESIAN_POINT('',(122.205,-112.605,-5.E-02)); +#500719 = CIRCLE('',#500720,0.135001418495); +#500720 = AXIS2_PLACEMENT_3D('',#500721,#500722,#500723); +#500721 = CARTESIAN_POINT('',(122.34000141848,-112.6050014184,-5.E-02)); +#500722 = DIRECTION('',(0.,0.,1.)); +#500723 = DIRECTION('',(-1.050720651629E-05,0.999999999945,0.)); +#500724 = ORIENTED_EDGE('',*,*,#500725,.T.); +#500725 = EDGE_CURVE('',#500717,#500726,#500728,.T.); +#500726 = VERTEX_POINT('',#500727); +#500727 = CARTESIAN_POINT('',(122.205,-112.875,-5.E-02)); +#500728 = LINE('',#500729,#500730); +#500729 = CARTESIAN_POINT('',(122.205,-112.605,-5.E-02)); +#500730 = VECTOR('',#500731,1.); +#500731 = DIRECTION('',(0.,-1.,0.)); +#500732 = ORIENTED_EDGE('',*,*,#500733,.T.); +#500733 = EDGE_CURVE('',#500726,#500734,#500736,.T.); +#500734 = VERTEX_POINT('',#500735); +#500735 = CARTESIAN_POINT('',(122.34,-113.01,-5.E-02)); +#500736 = CIRCLE('',#500737,0.135001418495); +#500737 = AXIS2_PLACEMENT_3D('',#500738,#500739,#500740); +#500738 = CARTESIAN_POINT('',(122.34000141848,-112.8749985815,-5.E-02)); +#500739 = DIRECTION('',(0.,0.,1.)); +#500740 = DIRECTION('',(-0.999999999945,-1.050720641103E-05,0.)); +#500741 = ORIENTED_EDGE('',*,*,#500742,.T.); +#500742 = EDGE_CURVE('',#500734,#500743,#500745,.T.); +#500743 = VERTEX_POINT('',#500744); +#500744 = CARTESIAN_POINT('',(122.71,-113.01,-5.E-02)); +#500745 = LINE('',#500746,#500747); +#500746 = CARTESIAN_POINT('',(122.34,-113.01,-5.E-02)); +#500747 = VECTOR('',#500748,1.); +#500748 = DIRECTION('',(1.,0.,0.)); +#500749 = ORIENTED_EDGE('',*,*,#500750,.T.); +#500750 = EDGE_CURVE('',#500743,#500751,#500753,.T.); +#500751 = VERTEX_POINT('',#500752); +#500752 = CARTESIAN_POINT('',(122.845,-112.875,-5.E-02)); +#500753 = CIRCLE('',#500754,0.135001418495); +#500754 = AXIS2_PLACEMENT_3D('',#500755,#500756,#500757); +#500755 = CARTESIAN_POINT('',(122.70999858151,-112.8749985815,-5.E-02)); +#500756 = DIRECTION('',(0.,0.,1.)); +#500757 = DIRECTION('',(1.050720651629E-05,-0.999999999945,0.)); +#500758 = ORIENTED_EDGE('',*,*,#500759,.T.); +#500759 = EDGE_CURVE('',#500751,#500698,#500760,.T.); +#500760 = LINE('',#500761,#500762); +#500761 = CARTESIAN_POINT('',(122.845,-112.875,-5.E-02)); +#500762 = VECTOR('',#500763,1.); +#500763 = DIRECTION('',(0.,1.,0.)); +#500764 = FACE_BOUND('',#500765,.T.); +#500765 = EDGE_LOOP('',(#500766,#500776,#500784,#500792)); +#500766 = ORIENTED_EDGE('',*,*,#500767,.T.); +#500767 = EDGE_CURVE('',#500768,#500770,#500772,.T.); +#500768 = VERTEX_POINT('',#500769); +#500769 = CARTESIAN_POINT('',(125.75,-111.8,-5.E-02)); +#500770 = VERTEX_POINT('',#500771); +#500771 = CARTESIAN_POINT('',(125.75,-108.2,-5.E-02)); +#500772 = LINE('',#500773,#500774); +#500773 = CARTESIAN_POINT('',(125.75,-111.8,-5.E-02)); +#500774 = VECTOR('',#500775,1.); +#500775 = DIRECTION('',(0.,1.,0.)); +#500776 = ORIENTED_EDGE('',*,*,#500777,.T.); +#500777 = EDGE_CURVE('',#500770,#500778,#500780,.T.); +#500778 = VERTEX_POINT('',#500779); +#500779 = CARTESIAN_POINT('',(124.25,-108.2,-5.E-02)); +#500780 = LINE('',#500781,#500782); +#500781 = CARTESIAN_POINT('',(125.75,-108.2,-5.E-02)); +#500782 = VECTOR('',#500783,1.); +#500783 = DIRECTION('',(-1.,0.,0.)); +#500784 = ORIENTED_EDGE('',*,*,#500785,.T.); +#500785 = EDGE_CURVE('',#500778,#500786,#500788,.T.); +#500786 = VERTEX_POINT('',#500787); +#500787 = CARTESIAN_POINT('',(124.25,-111.8,-5.E-02)); +#500788 = LINE('',#500789,#500790); +#500789 = CARTESIAN_POINT('',(124.25,-108.2,-5.E-02)); +#500790 = VECTOR('',#500791,1.); +#500791 = DIRECTION('',(0.,-1.,0.)); +#500792 = ORIENTED_EDGE('',*,*,#500793,.T.); +#500793 = EDGE_CURVE('',#500786,#500768,#500794,.T.); +#500794 = LINE('',#500795,#500796); +#500795 = CARTESIAN_POINT('',(124.25,-111.8,-5.E-02)); +#500796 = VECTOR('',#500797,1.); +#500797 = DIRECTION('',(1.,0.,0.)); +#500798 = FACE_BOUND('',#500799,.T.); +#500799 = EDGE_LOOP('',(#500800,#500810,#500818,#500826)); +#500800 = ORIENTED_EDGE('',*,*,#500801,.T.); +#500801 = EDGE_CURVE('',#500802,#500804,#500806,.T.); +#500802 = VERTEX_POINT('',#500803); +#500803 = CARTESIAN_POINT('',(128.8,-111.8,-5.E-02)); +#500804 = VERTEX_POINT('',#500805); +#500805 = CARTESIAN_POINT('',(128.8,-108.2,-5.E-02)); +#500806 = LINE('',#500807,#500808); +#500807 = CARTESIAN_POINT('',(128.8,-111.8,-5.E-02)); +#500808 = VECTOR('',#500809,1.); +#500809 = DIRECTION('',(0.,1.,0.)); +#500810 = ORIENTED_EDGE('',*,*,#500811,.T.); +#500811 = EDGE_CURVE('',#500804,#500812,#500814,.T.); +#500812 = VERTEX_POINT('',#500813); +#500813 = CARTESIAN_POINT('',(127.3,-108.2,-5.E-02)); +#500814 = LINE('',#500815,#500816); +#500815 = CARTESIAN_POINT('',(128.8,-108.2,-5.E-02)); +#500816 = VECTOR('',#500817,1.); +#500817 = DIRECTION('',(-1.,0.,0.)); +#500818 = ORIENTED_EDGE('',*,*,#500819,.T.); +#500819 = EDGE_CURVE('',#500812,#500820,#500822,.T.); +#500820 = VERTEX_POINT('',#500821); +#500821 = CARTESIAN_POINT('',(127.3,-111.8,-5.E-02)); +#500822 = LINE('',#500823,#500824); +#500823 = CARTESIAN_POINT('',(127.3,-108.2,-5.E-02)); +#500824 = VECTOR('',#500825,1.); +#500825 = DIRECTION('',(0.,-1.,0.)); +#500826 = ORIENTED_EDGE('',*,*,#500827,.T.); +#500827 = EDGE_CURVE('',#500820,#500802,#500828,.T.); +#500828 = LINE('',#500829,#500830); +#500829 = CARTESIAN_POINT('',(127.3,-111.8,-5.E-02)); +#500830 = VECTOR('',#500831,1.); +#500831 = DIRECTION('',(1.,0.,0.)); +#500832 = FACE_BOUND('',#500833,.T.); +#500833 = EDGE_LOOP('',(#500834,#500845,#500853,#500862,#500870,#500879, + #500887,#500896)); +#500834 = ORIENTED_EDGE('',*,*,#500835,.T.); +#500835 = EDGE_CURVE('',#500836,#500838,#500840,.T.); +#500836 = VERTEX_POINT('',#500837); +#500837 = CARTESIAN_POINT('',(122.75,-110.7,-5.E-02)); +#500838 = VERTEX_POINT('',#500839); +#500839 = CARTESIAN_POINT('',(122.5,-110.45,-5.E-02)); +#500840 = CIRCLE('',#500841,0.249998959685); +#500841 = AXIS2_PLACEMENT_3D('',#500842,#500843,#500844); +#500842 = CARTESIAN_POINT('',(122.50000104031,-110.6999989596,-5.E-02)); +#500843 = DIRECTION('',(0.,0.,1.)); +#500844 = DIRECTION('',(0.999999999991,-4.161285837067E-06,0.)); +#500845 = ORIENTED_EDGE('',*,*,#500846,.T.); +#500846 = EDGE_CURVE('',#500838,#500847,#500849,.T.); +#500847 = VERTEX_POINT('',#500848); +#500848 = CARTESIAN_POINT('',(121.55,-110.45,-5.E-02)); +#500849 = LINE('',#500850,#500851); +#500850 = CARTESIAN_POINT('',(122.5,-110.45,-5.E-02)); +#500851 = VECTOR('',#500852,1.); +#500852 = DIRECTION('',(-1.,0.,0.)); +#500853 = ORIENTED_EDGE('',*,*,#500854,.T.); +#500854 = EDGE_CURVE('',#500847,#500855,#500857,.T.); +#500855 = VERTEX_POINT('',#500856); +#500856 = CARTESIAN_POINT('',(121.3,-110.7,-5.E-02)); +#500857 = CIRCLE('',#500858,0.249998959685); +#500858 = AXIS2_PLACEMENT_3D('',#500859,#500860,#500861); +#500859 = CARTESIAN_POINT('',(121.54999895968,-110.6999989596,-5.E-02)); +#500860 = DIRECTION('',(0.,0.,1.)); +#500861 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#500862 = ORIENTED_EDGE('',*,*,#500863,.T.); +#500863 = EDGE_CURVE('',#500855,#500864,#500866,.T.); +#500864 = VERTEX_POINT('',#500865); +#500865 = CARTESIAN_POINT('',(121.3,-111.2,-5.E-02)); +#500866 = LINE('',#500867,#500868); +#500867 = CARTESIAN_POINT('',(121.3,-110.7,-5.E-02)); +#500868 = VECTOR('',#500869,1.); +#500869 = DIRECTION('',(0.,-1.,0.)); +#500870 = ORIENTED_EDGE('',*,*,#500871,.T.); +#500871 = EDGE_CURVE('',#500864,#500872,#500874,.T.); +#500872 = VERTEX_POINT('',#500873); +#500873 = CARTESIAN_POINT('',(121.55,-111.45,-5.E-02)); +#500874 = CIRCLE('',#500875,0.249998959685); +#500875 = AXIS2_PLACEMENT_3D('',#500876,#500877,#500878); +#500876 = CARTESIAN_POINT('',(121.54999895968,-111.2000010403,-5.E-02)); +#500877 = DIRECTION('',(0.,0.,1.)); +#500878 = DIRECTION('',(-0.999999999991,4.161285837066E-06,0.)); +#500879 = ORIENTED_EDGE('',*,*,#500880,.T.); +#500880 = EDGE_CURVE('',#500872,#500881,#500883,.T.); +#500881 = VERTEX_POINT('',#500882); +#500882 = CARTESIAN_POINT('',(122.5,-111.45,-5.E-02)); +#500883 = LINE('',#500884,#500885); +#500884 = CARTESIAN_POINT('',(121.55,-111.45,-5.E-02)); +#500885 = VECTOR('',#500886,1.); +#500886 = DIRECTION('',(1.,0.,0.)); +#500887 = ORIENTED_EDGE('',*,*,#500888,.T.); +#500888 = EDGE_CURVE('',#500881,#500889,#500891,.T.); +#500889 = VERTEX_POINT('',#500890); +#500890 = CARTESIAN_POINT('',(122.75,-111.2,-5.E-02)); +#500891 = CIRCLE('',#500892,0.249998959685); +#500892 = AXIS2_PLACEMENT_3D('',#500893,#500894,#500895); +#500893 = CARTESIAN_POINT('',(122.50000104031,-111.2000010403,-5.E-02)); +#500894 = DIRECTION('',(0.,0.,1.)); +#500895 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#500896 = ORIENTED_EDGE('',*,*,#500897,.T.); +#500897 = EDGE_CURVE('',#500889,#500836,#500898,.T.); +#500898 = LINE('',#500899,#500900); +#500899 = CARTESIAN_POINT('',(122.75,-111.2,-5.E-02)); +#500900 = VECTOR('',#500901,1.); +#500901 = DIRECTION('',(0.,1.,0.)); +#500902 = FACE_BOUND('',#500903,.T.); +#500903 = EDGE_LOOP('',(#500904,#500915,#500923,#500932,#500940,#500949, + #500957,#500966)); +#500904 = ORIENTED_EDGE('',*,*,#500905,.T.); +#500905 = EDGE_CURVE('',#500906,#500908,#500910,.T.); +#500906 = VERTEX_POINT('',#500907); +#500907 = CARTESIAN_POINT('',(130.825,-109.4875,-5.E-02)); +#500908 = VERTEX_POINT('',#500909); +#500909 = CARTESIAN_POINT('',(130.675,-109.3375,-5.E-02)); +#500910 = CIRCLE('',#500911,0.150000058649); +#500911 = AXIS2_PLACEMENT_3D('',#500912,#500913,#500914); +#500912 = CARTESIAN_POINT('',(130.67499994135,-109.4875000586,-5.E-02)); +#500913 = DIRECTION('',(0.,0.,1.)); +#500914 = DIRECTION('',(1.,3.909951247591E-07,-0.)); +#500915 = ORIENTED_EDGE('',*,*,#500916,.T.); +#500916 = EDGE_CURVE('',#500908,#500917,#500919,.T.); +#500917 = VERTEX_POINT('',#500918); +#500918 = CARTESIAN_POINT('',(130.375,-109.3375,-5.E-02)); +#500919 = LINE('',#500920,#500921); +#500920 = CARTESIAN_POINT('',(130.675,-109.3375,-5.E-02)); +#500921 = VECTOR('',#500922,1.); +#500922 = DIRECTION('',(-1.,0.,0.)); +#500923 = ORIENTED_EDGE('',*,*,#500924,.T.); +#500924 = EDGE_CURVE('',#500917,#500925,#500927,.T.); +#500925 = VERTEX_POINT('',#500926); +#500926 = CARTESIAN_POINT('',(130.225,-109.4875,-5.E-02)); +#500927 = CIRCLE('',#500928,0.150000058649); +#500928 = AXIS2_PLACEMENT_3D('',#500929,#500930,#500931); +#500929 = CARTESIAN_POINT('',(130.37500005864,-109.4875000586,-5.E-02)); +#500930 = DIRECTION('',(0.,0.,1.)); +#500931 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#500932 = ORIENTED_EDGE('',*,*,#500933,.T.); +#500933 = EDGE_CURVE('',#500925,#500934,#500936,.T.); +#500934 = VERTEX_POINT('',#500935); +#500935 = CARTESIAN_POINT('',(130.225,-110.5125,-5.E-02)); +#500936 = LINE('',#500937,#500938); +#500937 = CARTESIAN_POINT('',(130.225,-109.4875,-5.E-02)); +#500938 = VECTOR('',#500939,1.); +#500939 = DIRECTION('',(0.,-1.,0.)); +#500940 = ORIENTED_EDGE('',*,*,#500941,.T.); +#500941 = EDGE_CURVE('',#500934,#500942,#500944,.T.); +#500942 = VERTEX_POINT('',#500943); +#500943 = CARTESIAN_POINT('',(130.375,-110.6625,-5.E-02)); +#500944 = CIRCLE('',#500945,0.150000058649); +#500945 = AXIS2_PLACEMENT_3D('',#500946,#500947,#500948); +#500946 = CARTESIAN_POINT('',(130.37500005864,-110.5124999413,-5.E-02)); +#500947 = DIRECTION('',(0.,0.,1.)); +#500948 = DIRECTION('',(-1.,-3.909955037149E-07,0.)); +#500949 = ORIENTED_EDGE('',*,*,#500950,.T.); +#500950 = EDGE_CURVE('',#500942,#500951,#500953,.T.); +#500951 = VERTEX_POINT('',#500952); +#500952 = CARTESIAN_POINT('',(130.675,-110.6625,-5.E-02)); +#500953 = LINE('',#500954,#500955); +#500954 = CARTESIAN_POINT('',(130.375,-110.6625,-5.E-02)); +#500955 = VECTOR('',#500956,1.); +#500956 = DIRECTION('',(1.,0.,0.)); +#500957 = ORIENTED_EDGE('',*,*,#500958,.T.); +#500958 = EDGE_CURVE('',#500951,#500959,#500961,.T.); +#500959 = VERTEX_POINT('',#500960); +#500960 = CARTESIAN_POINT('',(130.825,-110.5125,-5.E-02)); +#500961 = CIRCLE('',#500962,0.150000058649); +#500962 = AXIS2_PLACEMENT_3D('',#500963,#500964,#500965); +#500963 = CARTESIAN_POINT('',(130.67499994135,-110.5124999413,-5.E-02)); +#500964 = DIRECTION('',(0.,0.,1.)); +#500965 = DIRECTION('',(3.909952194981E-07,-1.,0.)); +#500966 = ORIENTED_EDGE('',*,*,#500967,.T.); +#500967 = EDGE_CURVE('',#500959,#500906,#500968,.T.); +#500968 = LINE('',#500969,#500970); +#500969 = CARTESIAN_POINT('',(130.825,-110.5125,-5.E-02)); +#500970 = VECTOR('',#500971,1.); +#500971 = DIRECTION('',(0.,1.,0.)); +#500972 = FACE_BOUND('',#500973,.T.); +#500973 = EDGE_LOOP('',(#500974,#500985,#500993,#501002,#501010,#501019, + #501027,#501036)); +#500974 = ORIENTED_EDGE('',*,*,#500975,.T.); +#500975 = EDGE_CURVE('',#500976,#500978,#500980,.T.); +#500976 = VERTEX_POINT('',#500977); +#500977 = CARTESIAN_POINT('',(131.775,-109.4875,-5.E-02)); +#500978 = VERTEX_POINT('',#500979); +#500979 = CARTESIAN_POINT('',(131.625,-109.3375,-5.E-02)); +#500980 = CIRCLE('',#500981,0.150000058649); +#500981 = AXIS2_PLACEMENT_3D('',#500982,#500983,#500984); +#500982 = CARTESIAN_POINT('',(131.62499994135,-109.4875000586,-5.E-02)); +#500983 = DIRECTION('',(0.,0.,1.)); +#500984 = DIRECTION('',(1.,3.909955037149E-07,-0.)); +#500985 = ORIENTED_EDGE('',*,*,#500986,.T.); +#500986 = EDGE_CURVE('',#500978,#500987,#500989,.T.); +#500987 = VERTEX_POINT('',#500988); +#500988 = CARTESIAN_POINT('',(131.325,-109.3375,-5.E-02)); +#500989 = LINE('',#500990,#500991); +#500990 = CARTESIAN_POINT('',(131.625,-109.3375,-5.E-02)); +#500991 = VECTOR('',#500992,1.); +#500992 = DIRECTION('',(-1.,0.,0.)); +#500993 = ORIENTED_EDGE('',*,*,#500994,.T.); +#500994 = EDGE_CURVE('',#500987,#500995,#500997,.T.); +#500995 = VERTEX_POINT('',#500996); +#500996 = CARTESIAN_POINT('',(131.175,-109.4875,-5.E-02)); +#500997 = CIRCLE('',#500998,0.150000058649); +#500998 = AXIS2_PLACEMENT_3D('',#500999,#501000,#501001); +#500999 = CARTESIAN_POINT('',(131.32500005864,-109.4875000586,-5.E-02)); +#501000 = DIRECTION('',(0.,0.,1.)); +#501001 = DIRECTION('',(-3.909952194981E-07,1.,0.)); +#501002 = ORIENTED_EDGE('',*,*,#501003,.T.); +#501003 = EDGE_CURVE('',#500995,#501004,#501006,.T.); +#501004 = VERTEX_POINT('',#501005); +#501005 = CARTESIAN_POINT('',(131.175,-110.5125,-5.E-02)); +#501006 = LINE('',#501007,#501008); +#501007 = CARTESIAN_POINT('',(131.175,-109.4875,-5.E-02)); +#501008 = VECTOR('',#501009,1.); +#501009 = DIRECTION('',(0.,-1.,0.)); +#501010 = ORIENTED_EDGE('',*,*,#501011,.T.); +#501011 = EDGE_CURVE('',#501004,#501012,#501014,.T.); +#501012 = VERTEX_POINT('',#501013); +#501013 = CARTESIAN_POINT('',(131.325,-110.6625,-5.E-02)); +#501014 = CIRCLE('',#501015,0.150000058649); +#501015 = AXIS2_PLACEMENT_3D('',#501016,#501017,#501018); +#501016 = CARTESIAN_POINT('',(131.32500005864,-110.5124999413,-5.E-02)); +#501017 = DIRECTION('',(0.,0.,1.)); +#501018 = DIRECTION('',(-1.,-3.909951247591E-07,0.)); +#501019 = ORIENTED_EDGE('',*,*,#501020,.T.); +#501020 = EDGE_CURVE('',#501012,#501021,#501023,.T.); +#501021 = VERTEX_POINT('',#501022); +#501022 = CARTESIAN_POINT('',(131.625,-110.6625,-5.E-02)); +#501023 = LINE('',#501024,#501025); +#501024 = CARTESIAN_POINT('',(131.325,-110.6625,-5.E-02)); +#501025 = VECTOR('',#501026,1.); +#501026 = DIRECTION('',(1.,0.,0.)); +#501027 = ORIENTED_EDGE('',*,*,#501028,.T.); +#501028 = EDGE_CURVE('',#501021,#501029,#501031,.T.); +#501029 = VERTEX_POINT('',#501030); +#501030 = CARTESIAN_POINT('',(131.775,-110.5125,-5.E-02)); +#501031 = CIRCLE('',#501032,0.150000058649); +#501032 = AXIS2_PLACEMENT_3D('',#501033,#501034,#501035); +#501033 = CARTESIAN_POINT('',(131.62499994135,-110.5124999413,-5.E-02)); +#501034 = DIRECTION('',(0.,0.,1.)); +#501035 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#501036 = ORIENTED_EDGE('',*,*,#501037,.T.); +#501037 = EDGE_CURVE('',#501029,#500976,#501038,.T.); +#501038 = LINE('',#501039,#501040); +#501039 = CARTESIAN_POINT('',(131.775,-110.5125,-5.E-02)); +#501040 = VECTOR('',#501041,1.); +#501041 = DIRECTION('',(0.,1.,0.)); +#501042 = FACE_BOUND('',#501043,.T.); +#501043 = EDGE_LOOP('',(#501044,#501055,#501063,#501072,#501080,#501089, + #501097,#501106)); +#501044 = ORIENTED_EDGE('',*,*,#501045,.T.); +#501045 = EDGE_CURVE('',#501046,#501048,#501050,.T.); +#501046 = VERTEX_POINT('',#501047); +#501047 = CARTESIAN_POINT('',(132.725,-109.4875,-5.E-02)); +#501048 = VERTEX_POINT('',#501049); +#501049 = CARTESIAN_POINT('',(132.575,-109.3375,-5.E-02)); +#501050 = CIRCLE('',#501051,0.150000058649); +#501051 = AXIS2_PLACEMENT_3D('',#501052,#501053,#501054); +#501052 = CARTESIAN_POINT('',(132.57499994135,-109.4875000586,-5.E-02)); +#501053 = DIRECTION('',(0.,0.,1.)); +#501054 = DIRECTION('',(1.,3.909955037149E-07,-0.)); +#501055 = ORIENTED_EDGE('',*,*,#501056,.T.); +#501056 = EDGE_CURVE('',#501048,#501057,#501059,.T.); +#501057 = VERTEX_POINT('',#501058); +#501058 = CARTESIAN_POINT('',(132.275,-109.3375,-5.E-02)); +#501059 = LINE('',#501060,#501061); +#501060 = CARTESIAN_POINT('',(132.575,-109.3375,-5.E-02)); +#501061 = VECTOR('',#501062,1.); +#501062 = DIRECTION('',(-1.,0.,0.)); +#501063 = ORIENTED_EDGE('',*,*,#501064,.T.); +#501064 = EDGE_CURVE('',#501057,#501065,#501067,.T.); +#501065 = VERTEX_POINT('',#501066); +#501066 = CARTESIAN_POINT('',(132.125,-109.4875,-5.E-02)); +#501067 = CIRCLE('',#501068,0.150000058649); +#501068 = AXIS2_PLACEMENT_3D('',#501069,#501070,#501071); +#501069 = CARTESIAN_POINT('',(132.27500005864,-109.4875000586,-5.E-02)); +#501070 = DIRECTION('',(0.,0.,1.)); +#501071 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#501072 = ORIENTED_EDGE('',*,*,#501073,.T.); +#501073 = EDGE_CURVE('',#501065,#501074,#501076,.T.); +#501074 = VERTEX_POINT('',#501075); +#501075 = CARTESIAN_POINT('',(132.125,-110.5125,-5.E-02)); +#501076 = LINE('',#501077,#501078); +#501077 = CARTESIAN_POINT('',(132.125,-109.4875,-5.E-02)); +#501078 = VECTOR('',#501079,1.); +#501079 = DIRECTION('',(0.,-1.,0.)); +#501080 = ORIENTED_EDGE('',*,*,#501081,.T.); +#501081 = EDGE_CURVE('',#501074,#501082,#501084,.T.); +#501082 = VERTEX_POINT('',#501083); +#501083 = CARTESIAN_POINT('',(132.275,-110.6625,-5.E-02)); +#501084 = CIRCLE('',#501085,0.150000058649); +#501085 = AXIS2_PLACEMENT_3D('',#501086,#501087,#501088); +#501086 = CARTESIAN_POINT('',(132.27500005864,-110.5124999413,-5.E-02)); +#501087 = DIRECTION('',(0.,0.,1.)); +#501088 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#501089 = ORIENTED_EDGE('',*,*,#501090,.T.); +#501090 = EDGE_CURVE('',#501082,#501091,#501093,.T.); +#501091 = VERTEX_POINT('',#501092); +#501092 = CARTESIAN_POINT('',(132.575,-110.6625,-5.E-02)); +#501093 = LINE('',#501094,#501095); +#501094 = CARTESIAN_POINT('',(132.275,-110.6625,-5.E-02)); +#501095 = VECTOR('',#501096,1.); +#501096 = DIRECTION('',(1.,0.,0.)); +#501097 = ORIENTED_EDGE('',*,*,#501098,.T.); +#501098 = EDGE_CURVE('',#501091,#501099,#501101,.T.); +#501099 = VERTEX_POINT('',#501100); +#501100 = CARTESIAN_POINT('',(132.725,-110.5125,-5.E-02)); +#501101 = CIRCLE('',#501102,0.150000058649); +#501102 = AXIS2_PLACEMENT_3D('',#501103,#501104,#501105); +#501103 = CARTESIAN_POINT('',(132.57499994135,-110.5124999413,-5.E-02)); +#501104 = DIRECTION('',(0.,0.,1.)); +#501105 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#501106 = ORIENTED_EDGE('',*,*,#501107,.T.); +#501107 = EDGE_CURVE('',#501099,#501046,#501108,.T.); +#501108 = LINE('',#501109,#501110); +#501109 = CARTESIAN_POINT('',(132.725,-110.5125,-5.E-02)); +#501110 = VECTOR('',#501111,1.); +#501111 = DIRECTION('',(0.,1.,0.)); +#501112 = FACE_BOUND('',#501113,.T.); +#501113 = EDGE_LOOP('',(#501114,#501125,#501133,#501142,#501150,#501159, + #501167,#501176)); +#501114 = ORIENTED_EDGE('',*,*,#501115,.T.); +#501115 = EDGE_CURVE('',#501116,#501118,#501120,.T.); +#501116 = VERTEX_POINT('',#501117); +#501117 = CARTESIAN_POINT('',(122.75,-108.8,-5.E-02)); +#501118 = VERTEX_POINT('',#501119); +#501119 = CARTESIAN_POINT('',(122.5,-108.55,-5.E-02)); +#501120 = CIRCLE('',#501121,0.249998959685); +#501121 = AXIS2_PLACEMENT_3D('',#501122,#501123,#501124); +#501122 = CARTESIAN_POINT('',(122.50000104031,-108.7999989596,-5.E-02)); +#501123 = DIRECTION('',(0.,0.,1.)); +#501124 = DIRECTION('',(0.999999999991,-4.161285837067E-06,0.)); +#501125 = ORIENTED_EDGE('',*,*,#501126,.T.); +#501126 = EDGE_CURVE('',#501118,#501127,#501129,.T.); +#501127 = VERTEX_POINT('',#501128); +#501128 = CARTESIAN_POINT('',(121.55,-108.55,-5.E-02)); +#501129 = LINE('',#501130,#501131); +#501130 = CARTESIAN_POINT('',(122.5,-108.55,-5.E-02)); +#501131 = VECTOR('',#501132,1.); +#501132 = DIRECTION('',(-1.,0.,0.)); +#501133 = ORIENTED_EDGE('',*,*,#501134,.T.); +#501134 = EDGE_CURVE('',#501127,#501135,#501137,.T.); +#501135 = VERTEX_POINT('',#501136); +#501136 = CARTESIAN_POINT('',(121.3,-108.8,-5.E-02)); +#501137 = CIRCLE('',#501138,0.249998959685); +#501138 = AXIS2_PLACEMENT_3D('',#501139,#501140,#501141); +#501139 = CARTESIAN_POINT('',(121.54999895968,-108.7999989596,-5.E-02)); +#501140 = DIRECTION('',(0.,0.,1.)); +#501141 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#501142 = ORIENTED_EDGE('',*,*,#501143,.T.); +#501143 = EDGE_CURVE('',#501135,#501144,#501146,.T.); +#501144 = VERTEX_POINT('',#501145); +#501145 = CARTESIAN_POINT('',(121.3,-109.3,-5.E-02)); +#501146 = LINE('',#501147,#501148); +#501147 = CARTESIAN_POINT('',(121.3,-108.8,-5.E-02)); +#501148 = VECTOR('',#501149,1.); +#501149 = DIRECTION('',(0.,-1.,0.)); +#501150 = ORIENTED_EDGE('',*,*,#501151,.T.); +#501151 = EDGE_CURVE('',#501144,#501152,#501154,.T.); +#501152 = VERTEX_POINT('',#501153); +#501153 = CARTESIAN_POINT('',(121.55,-109.55,-5.E-02)); +#501154 = CIRCLE('',#501155,0.249998959685); +#501155 = AXIS2_PLACEMENT_3D('',#501156,#501157,#501158); +#501156 = CARTESIAN_POINT('',(121.54999895968,-109.3000010403,-5.E-02)); +#501157 = DIRECTION('',(0.,0.,1.)); +#501158 = DIRECTION('',(-0.999999999991,4.161285837066E-06,0.)); +#501159 = ORIENTED_EDGE('',*,*,#501160,.T.); +#501160 = EDGE_CURVE('',#501152,#501161,#501163,.T.); +#501161 = VERTEX_POINT('',#501162); +#501162 = CARTESIAN_POINT('',(122.5,-109.55,-5.E-02)); +#501163 = LINE('',#501164,#501165); +#501164 = CARTESIAN_POINT('',(121.55,-109.55,-5.E-02)); +#501165 = VECTOR('',#501166,1.); +#501166 = DIRECTION('',(1.,0.,0.)); +#501167 = ORIENTED_EDGE('',*,*,#501168,.T.); +#501168 = EDGE_CURVE('',#501161,#501169,#501171,.T.); +#501169 = VERTEX_POINT('',#501170); +#501170 = CARTESIAN_POINT('',(122.75,-109.3,-5.E-02)); +#501171 = CIRCLE('',#501172,0.249998959685); +#501172 = AXIS2_PLACEMENT_3D('',#501173,#501174,#501175); +#501173 = CARTESIAN_POINT('',(122.50000104031,-109.3000010403,-5.E-02)); +#501174 = DIRECTION('',(0.,0.,1.)); +#501175 = DIRECTION('',(-4.16128589391E-06,-0.999999999991,0.)); +#501176 = ORIENTED_EDGE('',*,*,#501177,.T.); +#501177 = EDGE_CURVE('',#501169,#501116,#501178,.T.); +#501178 = LINE('',#501179,#501180); +#501179 = CARTESIAN_POINT('',(122.75,-109.3,-5.E-02)); +#501180 = VECTOR('',#501181,1.); +#501181 = DIRECTION('',(0.,1.,0.)); +#501182 = FACE_BOUND('',#501183,.T.); +#501183 = EDGE_LOOP('',(#501184,#501195,#501203,#501212,#501220,#501229, + #501237,#501246)); +#501184 = ORIENTED_EDGE('',*,*,#501185,.T.); +#501185 = EDGE_CURVE('',#501186,#501188,#501190,.T.); +#501186 = VERTEX_POINT('',#501187); +#501187 = CARTESIAN_POINT('',(130.825,-107.2125,-5.E-02)); +#501188 = VERTEX_POINT('',#501189); +#501189 = CARTESIAN_POINT('',(130.675,-107.0625,-5.E-02)); +#501190 = CIRCLE('',#501191,0.150000058649); +#501191 = AXIS2_PLACEMENT_3D('',#501192,#501193,#501194); +#501192 = CARTESIAN_POINT('',(130.67499994135,-107.2125000586,-5.E-02)); +#501193 = DIRECTION('',(0.,0.,1.)); +#501194 = DIRECTION('',(1.,3.909950300201E-07,-0.)); +#501195 = ORIENTED_EDGE('',*,*,#501196,.T.); +#501196 = EDGE_CURVE('',#501188,#501197,#501199,.T.); +#501197 = VERTEX_POINT('',#501198); +#501198 = CARTESIAN_POINT('',(130.375,-107.0625,-5.E-02)); +#501199 = LINE('',#501200,#501201); +#501200 = CARTESIAN_POINT('',(130.675,-107.0625,-5.E-02)); +#501201 = VECTOR('',#501202,1.); +#501202 = DIRECTION('',(-1.,0.,0.)); +#501203 = ORIENTED_EDGE('',*,*,#501204,.T.); +#501204 = EDGE_CURVE('',#501197,#501205,#501207,.T.); +#501205 = VERTEX_POINT('',#501206); +#501206 = CARTESIAN_POINT('',(130.225,-107.2125,-5.E-02)); +#501207 = CIRCLE('',#501208,0.150000058649); +#501208 = AXIS2_PLACEMENT_3D('',#501209,#501210,#501211); +#501209 = CARTESIAN_POINT('',(130.37500005864,-107.2125000586,-5.E-02)); +#501210 = DIRECTION('',(0.,0.,1.)); +#501211 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#501212 = ORIENTED_EDGE('',*,*,#501213,.T.); +#501213 = EDGE_CURVE('',#501205,#501214,#501216,.T.); +#501214 = VERTEX_POINT('',#501215); +#501215 = CARTESIAN_POINT('',(130.225,-108.2375,-5.E-02)); +#501216 = LINE('',#501217,#501218); +#501217 = CARTESIAN_POINT('',(130.225,-107.2125,-5.E-02)); +#501218 = VECTOR('',#501219,1.); +#501219 = DIRECTION('',(0.,-1.,0.)); +#501220 = ORIENTED_EDGE('',*,*,#501221,.T.); +#501221 = EDGE_CURVE('',#501214,#501222,#501224,.T.); +#501222 = VERTEX_POINT('',#501223); +#501223 = CARTESIAN_POINT('',(130.375,-108.3875,-5.E-02)); +#501224 = CIRCLE('',#501225,0.150000058649); +#501225 = AXIS2_PLACEMENT_3D('',#501226,#501227,#501228); +#501226 = CARTESIAN_POINT('',(130.37500005864,-108.2374999413,-5.E-02)); +#501227 = DIRECTION('',(0.,0.,1.)); +#501228 = DIRECTION('',(-1.,-3.909955037148E-07,0.)); +#501229 = ORIENTED_EDGE('',*,*,#501230,.T.); +#501230 = EDGE_CURVE('',#501222,#501231,#501233,.T.); +#501231 = VERTEX_POINT('',#501232); +#501232 = CARTESIAN_POINT('',(130.675,-108.3875,-5.E-02)); +#501233 = LINE('',#501234,#501235); +#501234 = CARTESIAN_POINT('',(130.375,-108.3875,-5.E-02)); +#501235 = VECTOR('',#501236,1.); +#501236 = DIRECTION('',(1.,0.,0.)); +#501237 = ORIENTED_EDGE('',*,*,#501238,.T.); +#501238 = EDGE_CURVE('',#501231,#501239,#501241,.T.); +#501239 = VERTEX_POINT('',#501240); +#501240 = CARTESIAN_POINT('',(130.825,-108.2375,-5.E-02)); +#501241 = CIRCLE('',#501242,0.150000058649); +#501242 = AXIS2_PLACEMENT_3D('',#501243,#501244,#501245); +#501243 = CARTESIAN_POINT('',(130.67499994135,-108.2374999413,-5.E-02)); +#501244 = DIRECTION('',(0.,0.,1.)); +#501245 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#501246 = ORIENTED_EDGE('',*,*,#501247,.T.); +#501247 = EDGE_CURVE('',#501239,#501186,#501248,.T.); +#501248 = LINE('',#501249,#501250); +#501249 = CARTESIAN_POINT('',(130.825,-108.2375,-5.E-02)); +#501250 = VECTOR('',#501251,1.); +#501251 = DIRECTION('',(0.,1.,0.)); +#501252 = FACE_BOUND('',#501253,.T.); +#501253 = EDGE_LOOP('',(#501254,#501265,#501273,#501282,#501290,#501299, + #501307,#501316)); +#501254 = ORIENTED_EDGE('',*,*,#501255,.T.); +#501255 = EDGE_CURVE('',#501256,#501258,#501260,.T.); +#501256 = VERTEX_POINT('',#501257); +#501257 = CARTESIAN_POINT('',(132.725,-107.2125,-5.E-02)); +#501258 = VERTEX_POINT('',#501259); +#501259 = CARTESIAN_POINT('',(132.575,-107.0625,-5.E-02)); +#501260 = CIRCLE('',#501261,0.150000058649); +#501261 = AXIS2_PLACEMENT_3D('',#501262,#501263,#501264); +#501262 = CARTESIAN_POINT('',(132.57499994135,-107.2125000586,-5.E-02)); +#501263 = DIRECTION('',(0.,0.,1.)); +#501264 = DIRECTION('',(1.,3.909954089759E-07,-0.)); +#501265 = ORIENTED_EDGE('',*,*,#501266,.T.); +#501266 = EDGE_CURVE('',#501258,#501267,#501269,.T.); +#501267 = VERTEX_POINT('',#501268); +#501268 = CARTESIAN_POINT('',(132.275,-107.0625,-5.E-02)); +#501269 = LINE('',#501270,#501271); +#501270 = CARTESIAN_POINT('',(132.575,-107.0625,-5.E-02)); +#501271 = VECTOR('',#501272,1.); +#501272 = DIRECTION('',(-1.,0.,0.)); +#501273 = ORIENTED_EDGE('',*,*,#501274,.T.); +#501274 = EDGE_CURVE('',#501267,#501275,#501277,.T.); +#501275 = VERTEX_POINT('',#501276); +#501276 = CARTESIAN_POINT('',(132.125,-107.2125,-5.E-02)); +#501277 = CIRCLE('',#501278,0.150000058649); +#501278 = AXIS2_PLACEMENT_3D('',#501279,#501280,#501281); +#501279 = CARTESIAN_POINT('',(132.27500005864,-107.2125000586,-5.E-02)); +#501280 = DIRECTION('',(0.,0.,1.)); +#501281 = DIRECTION('',(-3.90995408976E-07,1.,0.)); +#501282 = ORIENTED_EDGE('',*,*,#501283,.T.); +#501283 = EDGE_CURVE('',#501275,#501284,#501286,.T.); +#501284 = VERTEX_POINT('',#501285); +#501285 = CARTESIAN_POINT('',(132.125,-108.2375,-5.E-02)); +#501286 = LINE('',#501287,#501288); +#501287 = CARTESIAN_POINT('',(132.125,-107.2125,-5.E-02)); +#501288 = VECTOR('',#501289,1.); +#501289 = DIRECTION('',(0.,-1.,0.)); +#501290 = ORIENTED_EDGE('',*,*,#501291,.T.); +#501291 = EDGE_CURVE('',#501284,#501292,#501294,.T.); +#501292 = VERTEX_POINT('',#501293); +#501293 = CARTESIAN_POINT('',(132.275,-108.3875,-5.E-02)); +#501294 = CIRCLE('',#501295,0.150000058649); +#501295 = AXIS2_PLACEMENT_3D('',#501296,#501297,#501298); +#501296 = CARTESIAN_POINT('',(132.27500005864,-108.2374999413,-5.E-02)); +#501297 = DIRECTION('',(0.,0.,1.)); +#501298 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#501299 = ORIENTED_EDGE('',*,*,#501300,.T.); +#501300 = EDGE_CURVE('',#501292,#501301,#501303,.T.); +#501301 = VERTEX_POINT('',#501302); +#501302 = CARTESIAN_POINT('',(132.575,-108.3875,-5.E-02)); +#501303 = LINE('',#501304,#501305); +#501304 = CARTESIAN_POINT('',(132.275,-108.3875,-5.E-02)); +#501305 = VECTOR('',#501306,1.); +#501306 = DIRECTION('',(1.,0.,0.)); +#501307 = ORIENTED_EDGE('',*,*,#501308,.T.); +#501308 = EDGE_CURVE('',#501301,#501309,#501311,.T.); +#501309 = VERTEX_POINT('',#501310); +#501310 = CARTESIAN_POINT('',(132.725,-108.2375,-5.E-02)); +#501311 = CIRCLE('',#501312,0.150000058649); +#501312 = AXIS2_PLACEMENT_3D('',#501313,#501314,#501315); +#501313 = CARTESIAN_POINT('',(132.57499994135,-108.2374999413,-5.E-02)); +#501314 = DIRECTION('',(0.,0.,1.)); +#501315 = DIRECTION('',(3.909955984539E-07,-1.,0.)); +#501316 = ORIENTED_EDGE('',*,*,#501317,.T.); +#501317 = EDGE_CURVE('',#501309,#501256,#501318,.T.); +#501318 = LINE('',#501319,#501320); +#501319 = CARTESIAN_POINT('',(132.725,-108.2375,-5.E-02)); +#501320 = VECTOR('',#501321,1.); +#501321 = DIRECTION('',(0.,1.,0.)); +#501322 = FACE_BOUND('',#501323,.T.); +#501323 = EDGE_LOOP('',(#501324)); +#501324 = ORIENTED_EDGE('',*,*,#501325,.T.); +#501325 = EDGE_CURVE('',#501326,#501326,#501328,.T.); +#501326 = VERTEX_POINT('',#501327); +#501327 = CARTESIAN_POINT('',(135.474999,-105.5,-5.E-02)); +#501328 = CIRCLE('',#501329,1.224999); +#501329 = AXIS2_PLACEMENT_3D('',#501330,#501331,#501332); +#501330 = CARTESIAN_POINT('',(134.25,-105.5,-5.E-02)); +#501331 = DIRECTION('',(0.,0.,1.)); +#501332 = DIRECTION('',(1.,0.,-0.)); +#501333 = FACE_BOUND('',#501334,.T.); +#501334 = EDGE_LOOP('',(#501335)); +#501335 = ORIENTED_EDGE('',*,*,#501336,.T.); +#501336 = EDGE_CURVE('',#501337,#501337,#501339,.T.); +#501337 = VERTEX_POINT('',#501338); +#501338 = CARTESIAN_POINT('',(141.974999,-105.5,-5.E-02)); +#501339 = CIRCLE('',#501340,1.224999); +#501340 = AXIS2_PLACEMENT_3D('',#501341,#501342,#501343); +#501341 = CARTESIAN_POINT('',(140.75,-105.5,-5.E-02)); +#501342 = DIRECTION('',(0.,0.,1.)); +#501343 = DIRECTION('',(1.,0.,-0.)); +#501344 = FACE_BOUND('',#501345,.T.); +#501345 = EDGE_LOOP('',(#501346,#501357,#501365,#501374,#501382,#501391, + #501399,#501408)); +#501346 = ORIENTED_EDGE('',*,*,#501347,.T.); +#501347 = EDGE_CURVE('',#501348,#501350,#501352,.T.); +#501348 = VERTEX_POINT('',#501349); +#501349 = CARTESIAN_POINT('',(130.05,-105.025,-5.E-02)); +#501350 = VERTEX_POINT('',#501351); +#501351 = CARTESIAN_POINT('',(129.8,-104.775,-5.E-02)); +#501352 = CIRCLE('',#501353,0.249998959685); +#501353 = AXIS2_PLACEMENT_3D('',#501354,#501355,#501356); +#501354 = CARTESIAN_POINT('',(129.80000104031,-105.0249989596,-5.E-02)); +#501355 = DIRECTION('',(0.,0.,1.)); +#501356 = DIRECTION('',(0.999999999991,-4.161285780223E-06,0.)); +#501357 = ORIENTED_EDGE('',*,*,#501358,.T.); +#501358 = EDGE_CURVE('',#501350,#501359,#501361,.T.); +#501359 = VERTEX_POINT('',#501360); +#501360 = CARTESIAN_POINT('',(129.3,-104.775,-5.E-02)); +#501361 = LINE('',#501362,#501363); +#501362 = CARTESIAN_POINT('',(129.8,-104.775,-5.E-02)); +#501363 = VECTOR('',#501364,1.); +#501364 = DIRECTION('',(-1.,0.,0.)); +#501365 = ORIENTED_EDGE('',*,*,#501366,.T.); +#501366 = EDGE_CURVE('',#501359,#501367,#501369,.T.); +#501367 = VERTEX_POINT('',#501368); +#501368 = CARTESIAN_POINT('',(129.05,-105.025,-5.E-02)); +#501369 = CIRCLE('',#501370,0.249998959685); +#501370 = AXIS2_PLACEMENT_3D('',#501371,#501372,#501373); +#501371 = CARTESIAN_POINT('',(129.29999895968,-105.0249989596,-5.E-02)); +#501372 = DIRECTION('',(0.,0.,1.)); +#501373 = DIRECTION('',(4.161285950754E-06,0.999999999991,-0.)); +#501374 = ORIENTED_EDGE('',*,*,#501375,.T.); +#501375 = EDGE_CURVE('',#501367,#501376,#501378,.T.); +#501376 = VERTEX_POINT('',#501377); +#501377 = CARTESIAN_POINT('',(129.05,-105.975,-5.E-02)); +#501378 = LINE('',#501379,#501380); +#501379 = CARTESIAN_POINT('',(129.05,-105.025,-5.E-02)); +#501380 = VECTOR('',#501381,1.); +#501381 = DIRECTION('',(0.,-1.,0.)); +#501382 = ORIENTED_EDGE('',*,*,#501383,.T.); +#501383 = EDGE_CURVE('',#501376,#501384,#501386,.T.); +#501384 = VERTEX_POINT('',#501385); +#501385 = CARTESIAN_POINT('',(129.3,-106.225,-5.E-02)); +#501386 = CIRCLE('',#501387,0.249998959685); +#501387 = AXIS2_PLACEMENT_3D('',#501388,#501389,#501390); +#501388 = CARTESIAN_POINT('',(129.29999895968,-105.9750010403,-5.E-02)); +#501389 = DIRECTION('',(0.,0.,1.)); +#501390 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#501391 = ORIENTED_EDGE('',*,*,#501392,.T.); +#501392 = EDGE_CURVE('',#501384,#501393,#501395,.T.); +#501393 = VERTEX_POINT('',#501394); +#501394 = CARTESIAN_POINT('',(129.8,-106.225,-5.E-02)); +#501395 = LINE('',#501396,#501397); +#501396 = CARTESIAN_POINT('',(129.3,-106.225,-5.E-02)); +#501397 = VECTOR('',#501398,1.); +#501398 = DIRECTION('',(1.,0.,0.)); +#501399 = ORIENTED_EDGE('',*,*,#501400,.T.); +#501400 = EDGE_CURVE('',#501393,#501401,#501403,.T.); +#501401 = VERTEX_POINT('',#501402); +#501402 = CARTESIAN_POINT('',(130.05,-105.975,-5.E-02)); +#501403 = CIRCLE('',#501404,0.249998959685); +#501404 = AXIS2_PLACEMENT_3D('',#501405,#501406,#501407); +#501405 = CARTESIAN_POINT('',(129.80000104031,-105.9750010403,-5.E-02)); +#501406 = DIRECTION('',(0.,0.,1.)); +#501407 = DIRECTION('',(-4.161285837066E-06,-0.999999999991,0.)); +#501408 = ORIENTED_EDGE('',*,*,#501409,.T.); +#501409 = EDGE_CURVE('',#501401,#501348,#501410,.T.); +#501410 = LINE('',#501411,#501412); +#501411 = CARTESIAN_POINT('',(130.05,-105.975,-5.E-02)); +#501412 = VECTOR('',#501413,1.); +#501413 = DIRECTION('',(0.,1.,0.)); +#501414 = FACE_BOUND('',#501415,.T.); +#501415 = EDGE_LOOP('',(#501416,#501427,#501435,#501444,#501452,#501461, + #501469,#501478)); +#501416 = ORIENTED_EDGE('',*,*,#501417,.T.); +#501417 = EDGE_CURVE('',#501418,#501420,#501422,.T.); +#501418 = VERTEX_POINT('',#501419); +#501419 = CARTESIAN_POINT('',(131.95,-105.025,-5.E-02)); +#501420 = VERTEX_POINT('',#501421); +#501421 = CARTESIAN_POINT('',(131.7,-104.775,-5.E-02)); +#501422 = CIRCLE('',#501423,0.249998959685); +#501423 = AXIS2_PLACEMENT_3D('',#501424,#501425,#501426); +#501424 = CARTESIAN_POINT('',(131.70000104031,-105.0249989596,-5.E-02)); +#501425 = DIRECTION('',(0.,0.,1.)); +#501426 = DIRECTION('',(0.999999999991,-4.161285950754E-06,0.)); +#501427 = ORIENTED_EDGE('',*,*,#501428,.T.); +#501428 = EDGE_CURVE('',#501420,#501429,#501431,.T.); +#501429 = VERTEX_POINT('',#501430); +#501430 = CARTESIAN_POINT('',(131.2,-104.775,-5.E-02)); +#501431 = LINE('',#501432,#501433); +#501432 = CARTESIAN_POINT('',(131.7,-104.775,-5.E-02)); +#501433 = VECTOR('',#501434,1.); +#501434 = DIRECTION('',(-1.,0.,0.)); +#501435 = ORIENTED_EDGE('',*,*,#501436,.T.); +#501436 = EDGE_CURVE('',#501429,#501437,#501439,.T.); +#501437 = VERTEX_POINT('',#501438); +#501438 = CARTESIAN_POINT('',(130.95,-105.025,-5.E-02)); +#501439 = CIRCLE('',#501440,0.249998959685); +#501440 = AXIS2_PLACEMENT_3D('',#501441,#501442,#501443); +#501441 = CARTESIAN_POINT('',(131.19999895968,-105.0249989596,-5.E-02)); +#501442 = DIRECTION('',(0.,0.,1.)); +#501443 = DIRECTION('',(4.161285837066E-06,0.999999999991,-0.)); +#501444 = ORIENTED_EDGE('',*,*,#501445,.T.); +#501445 = EDGE_CURVE('',#501437,#501446,#501448,.T.); +#501446 = VERTEX_POINT('',#501447); +#501447 = CARTESIAN_POINT('',(130.95,-105.975,-5.E-02)); +#501448 = LINE('',#501449,#501450); +#501449 = CARTESIAN_POINT('',(130.95,-105.025,-5.E-02)); +#501450 = VECTOR('',#501451,1.); +#501451 = DIRECTION('',(0.,-1.,0.)); +#501452 = ORIENTED_EDGE('',*,*,#501453,.T.); +#501453 = EDGE_CURVE('',#501446,#501454,#501456,.T.); +#501454 = VERTEX_POINT('',#501455); +#501455 = CARTESIAN_POINT('',(131.2,-106.225,-5.E-02)); +#501456 = CIRCLE('',#501457,0.249998959685); +#501457 = AXIS2_PLACEMENT_3D('',#501458,#501459,#501460); +#501458 = CARTESIAN_POINT('',(131.19999895968,-105.9750010403,-5.E-02)); +#501459 = DIRECTION('',(0.,0.,1.)); +#501460 = DIRECTION('',(-0.999999999991,4.161285780223E-06,0.)); +#501461 = ORIENTED_EDGE('',*,*,#501462,.T.); +#501462 = EDGE_CURVE('',#501454,#501463,#501465,.T.); +#501463 = VERTEX_POINT('',#501464); +#501464 = CARTESIAN_POINT('',(131.7,-106.225,-5.E-02)); +#501465 = LINE('',#501466,#501467); +#501466 = CARTESIAN_POINT('',(131.2,-106.225,-5.E-02)); +#501467 = VECTOR('',#501468,1.); +#501468 = DIRECTION('',(1.,0.,0.)); +#501469 = ORIENTED_EDGE('',*,*,#501470,.T.); +#501470 = EDGE_CURVE('',#501463,#501471,#501473,.T.); +#501471 = VERTEX_POINT('',#501472); +#501472 = CARTESIAN_POINT('',(131.95,-105.975,-5.E-02)); +#501473 = CIRCLE('',#501474,0.249998959685); +#501474 = AXIS2_PLACEMENT_3D('',#501475,#501476,#501477); +#501475 = CARTESIAN_POINT('',(131.70000104031,-105.9750010403,-5.E-02)); +#501476 = DIRECTION('',(0.,0.,1.)); +#501477 = DIRECTION('',(-4.161285950754E-06,-0.999999999991,0.)); +#501478 = ORIENTED_EDGE('',*,*,#501479,.T.); +#501479 = EDGE_CURVE('',#501471,#501418,#501480,.T.); +#501480 = LINE('',#501481,#501482); +#501481 = CARTESIAN_POINT('',(131.95,-105.975,-5.E-02)); +#501482 = VECTOR('',#501483,1.); +#501483 = DIRECTION('',(0.,1.,0.)); +#501484 = FACE_BOUND('',#501485,.T.); +#501485 = EDGE_LOOP('',(#501486)); +#501486 = ORIENTED_EDGE('',*,*,#501487,.T.); +#501487 = EDGE_CURVE('',#501488,#501488,#501490,.T.); +#501488 = VERTEX_POINT('',#501489); +#501489 = CARTESIAN_POINT('',(151.399999,-105.2,-5.E-02)); +#501490 = CIRCLE('',#501491,0.999999); +#501491 = AXIS2_PLACEMENT_3D('',#501492,#501493,#501494); +#501492 = CARTESIAN_POINT('',(150.4,-105.2,-5.E-02)); +#501493 = DIRECTION('',(0.,0.,1.)); +#501494 = DIRECTION('',(1.,0.,-0.)); +#501495 = FACE_BOUND('',#501496,.T.); +#501496 = EDGE_LOOP('',(#501497)); +#501497 = ORIENTED_EDGE('',*,*,#501498,.T.); +#501498 = EDGE_CURVE('',#501499,#501499,#501501,.T.); +#501499 = VERTEX_POINT('',#501500); +#501500 = CARTESIAN_POINT('',(122.2,-102.65,-5.E-02)); +#501501 = CIRCLE('',#501502,0.45); +#501502 = AXIS2_PLACEMENT_3D('',#501503,#501504,#501505); +#501503 = CARTESIAN_POINT('',(121.75,-102.65,-5.E-02)); +#501504 = DIRECTION('',(0.,0.,1.)); +#501505 = DIRECTION('',(1.,0.,-0.)); +#501506 = FACE_BOUND('',#501507,.T.); +#501507 = EDGE_LOOP('',(#501508)); +#501508 = ORIENTED_EDGE('',*,*,#501509,.T.); +#501509 = EDGE_CURVE('',#501510,#501510,#501512,.T.); +#501510 = VERTEX_POINT('',#501511); +#501511 = CARTESIAN_POINT('',(153.65,-102.65,-5.E-02)); +#501512 = CIRCLE('',#501513,0.45); +#501513 = AXIS2_PLACEMENT_3D('',#501514,#501515,#501516); +#501514 = CARTESIAN_POINT('',(153.2,-102.65,-5.E-02)); +#501515 = DIRECTION('',(0.,0.,1.)); +#501516 = DIRECTION('',(1.,0.,-0.)); +#501517 = FACE_BOUND('',#501518,.T.); +#501518 = EDGE_LOOP('',(#501519)); +#501519 = ORIENTED_EDGE('',*,*,#501520,.T.); +#501520 = EDGE_CURVE('',#501521,#501521,#501523,.T.); +#501521 = VERTEX_POINT('',#501522); +#501522 = CARTESIAN_POINT('',(135.474999,-101.,-5.E-02)); +#501523 = CIRCLE('',#501524,1.224999); +#501524 = AXIS2_PLACEMENT_3D('',#501525,#501526,#501527); +#501525 = CARTESIAN_POINT('',(134.25,-101.,-5.E-02)); +#501526 = DIRECTION('',(0.,0.,1.)); +#501527 = DIRECTION('',(1.,0.,-0.)); +#501528 = FACE_BOUND('',#501529,.T.); +#501529 = EDGE_LOOP('',(#501530)); +#501530 = ORIENTED_EDGE('',*,*,#501531,.T.); +#501531 = EDGE_CURVE('',#501532,#501532,#501534,.T.); +#501532 = VERTEX_POINT('',#501533); +#501533 = CARTESIAN_POINT('',(141.974999,-101.,-5.E-02)); +#501534 = CIRCLE('',#501535,1.224999); +#501535 = AXIS2_PLACEMENT_3D('',#501536,#501537,#501538); +#501536 = CARTESIAN_POINT('',(140.75,-101.,-5.E-02)); +#501537 = DIRECTION('',(0.,0.,1.)); +#501538 = DIRECTION('',(1.,0.,-0.)); +#501539 = FACE_BOUND('',#501540,.T.); +#501540 = EDGE_LOOP('',(#501541)); +#501541 = ORIENTED_EDGE('',*,*,#501542,.T.); +#501542 = EDGE_CURVE('',#501543,#501543,#501545,.T.); +#501543 = VERTEX_POINT('',#501544); +#501544 = CARTESIAN_POINT('',(132.55,-100.25,-5.E-02)); +#501545 = CIRCLE('',#501546,1.375); +#501546 = AXIS2_PLACEMENT_3D('',#501547,#501548,#501549); +#501547 = CARTESIAN_POINT('',(131.175,-100.25,-5.E-02)); +#501548 = DIRECTION('',(0.,0.,1.)); +#501549 = DIRECTION('',(1.,0.,-0.)); +#501550 = FACE_BOUND('',#501551,.T.); +#501551 = EDGE_LOOP('',(#501552)); +#501552 = ORIENTED_EDGE('',*,*,#501553,.T.); +#501553 = EDGE_CURVE('',#501554,#501554,#501556,.T.); +#501554 = VERTEX_POINT('',#501555); +#501555 = CARTESIAN_POINT('',(145.2,-100.25,-5.E-02)); +#501556 = CIRCLE('',#501557,1.375); +#501557 = AXIS2_PLACEMENT_3D('',#501558,#501559,#501560); +#501558 = CARTESIAN_POINT('',(143.825,-100.25,-5.E-02)); +#501559 = DIRECTION('',(0.,0.,1.)); +#501560 = DIRECTION('',(1.,0.,-0.)); +#501561 = FACE_BOUND('',#501562,.T.); +#501562 = EDGE_LOOP('',(#501563)); +#501563 = ORIENTED_EDGE('',*,*,#501564,.T.); +#501564 = EDGE_CURVE('',#501565,#501565,#501567,.T.); +#501565 = VERTEX_POINT('',#501566); +#501566 = CARTESIAN_POINT('',(147.354999,-97.75,-5.E-02)); +#501567 = CIRCLE('',#501568,1.124999); +#501568 = AXIS2_PLACEMENT_3D('',#501569,#501570,#501571); +#501569 = CARTESIAN_POINT('',(146.23,-97.75,-5.E-02)); +#501570 = DIRECTION('',(0.,0.,1.)); +#501571 = DIRECTION('',(1.,0.,-0.)); +#501572 = FACE_BOUND('',#501573,.T.); +#501573 = EDGE_LOOP('',(#501574)); +#501574 = ORIENTED_EDGE('',*,*,#501575,.T.); +#501575 = EDGE_CURVE('',#501576,#501576,#501578,.T.); +#501576 = VERTEX_POINT('',#501577); +#501577 = CARTESIAN_POINT('',(122.2,-98.4,-5.E-02)); +#501578 = CIRCLE('',#501579,0.45); +#501579 = AXIS2_PLACEMENT_3D('',#501580,#501581,#501582); +#501580 = CARTESIAN_POINT('',(121.75,-98.4,-5.E-02)); +#501581 = DIRECTION('',(0.,0.,1.)); +#501582 = DIRECTION('',(1.,0.,-0.)); +#501583 = FACE_BOUND('',#501584,.T.); +#501584 = EDGE_LOOP('',(#501585)); +#501585 = ORIENTED_EDGE('',*,*,#501586,.T.); +#501586 = EDGE_CURVE('',#501587,#501587,#501589,.T.); +#501587 = VERTEX_POINT('',#501588); +#501588 = CARTESIAN_POINT('',(153.65,-98.4,-5.E-02)); +#501589 = CIRCLE('',#501590,0.45); +#501590 = AXIS2_PLACEMENT_3D('',#501591,#501592,#501593); +#501591 = CARTESIAN_POINT('',(153.2,-98.4,-5.E-02)); +#501592 = DIRECTION('',(0.,0.,1.)); +#501593 = DIRECTION('',(1.,0.,-0.)); +#501594 = FACE_BOUND('',#501595,.T.); +#501595 = EDGE_LOOP('',(#501596)); +#501596 = ORIENTED_EDGE('',*,*,#501597,.T.); +#501597 = EDGE_CURVE('',#501598,#501598,#501600,.T.); +#501598 = VERTEX_POINT('',#501599); +#501599 = CARTESIAN_POINT('',(147.354999,-95.25,-5.E-02)); +#501600 = CIRCLE('',#501601,1.124999); +#501601 = AXIS2_PLACEMENT_3D('',#501602,#501603,#501604); +#501602 = CARTESIAN_POINT('',(146.23,-95.25,-5.E-02)); +#501603 = DIRECTION('',(0.,0.,1.)); +#501604 = DIRECTION('',(1.,0.,-0.)); +#501605 = FACE_BOUND('',#501606,.T.); +#501606 = EDGE_LOOP('',(#501607)); +#501607 = ORIENTED_EDGE('',*,*,#501608,.T.); +#501608 = EDGE_CURVE('',#501609,#501609,#501611,.T.); +#501609 = VERTEX_POINT('',#501610); +#501610 = CARTESIAN_POINT('',(126.899999,-95.3,-5.E-02)); +#501611 = CIRCLE('',#501612,0.999999); +#501612 = AXIS2_PLACEMENT_3D('',#501613,#501614,#501615); +#501613 = CARTESIAN_POINT('',(125.9,-95.3,-5.E-02)); +#501614 = DIRECTION('',(0.,0.,1.)); +#501615 = DIRECTION('',(1.,0.,-0.)); +#501616 = FACE_BOUND('',#501617,.T.); +#501617 = EDGE_LOOP('',(#501618)); +#501618 = ORIENTED_EDGE('',*,*,#501619,.T.); +#501619 = EDGE_CURVE('',#501620,#501620,#501622,.T.); +#501620 = VERTEX_POINT('',#501621); +#501621 = CARTESIAN_POINT('',(147.354999,-92.75,-5.E-02)); +#501622 = CIRCLE('',#501623,1.124999); +#501623 = AXIS2_PLACEMENT_3D('',#501624,#501625,#501626); +#501624 = CARTESIAN_POINT('',(146.23,-92.75,-5.E-02)); +#501625 = DIRECTION('',(0.,0.,1.)); +#501626 = DIRECTION('',(1.,0.,-0.)); +#501627 = FACE_BOUND('',#501628,.T.); +#501628 = EDGE_LOOP('',(#501629)); +#501629 = ORIENTED_EDGE('',*,*,#501630,.T.); +#501630 = EDGE_CURVE('',#501631,#501631,#501633,.T.); +#501631 = VERTEX_POINT('',#501632); +#501632 = CARTESIAN_POINT('',(122.2,-92.625,-5.E-02)); +#501633 = CIRCLE('',#501634,0.45); +#501634 = AXIS2_PLACEMENT_3D('',#501635,#501636,#501637); +#501635 = CARTESIAN_POINT('',(121.75,-92.625,-5.E-02)); +#501636 = DIRECTION('',(0.,0.,1.)); +#501637 = DIRECTION('',(1.,0.,-0.)); +#501638 = FACE_BOUND('',#501639,.T.); +#501639 = EDGE_LOOP('',(#501640)); +#501640 = ORIENTED_EDGE('',*,*,#501641,.T.); +#501641 = EDGE_CURVE('',#501642,#501642,#501644,.T.); +#501642 = VERTEX_POINT('',#501643); +#501643 = CARTESIAN_POINT('',(153.65,-92.625,-5.E-02)); +#501644 = CIRCLE('',#501645,0.45); +#501645 = AXIS2_PLACEMENT_3D('',#501646,#501647,#501648); +#501646 = CARTESIAN_POINT('',(153.2,-92.625,-5.E-02)); +#501647 = DIRECTION('',(0.,0.,1.)); +#501648 = DIRECTION('',(1.,0.,-0.)); +#501649 = FACE_BOUND('',#501650,.T.); +#501650 = EDGE_LOOP('',(#501651)); +#501651 = ORIENTED_EDGE('',*,*,#501652,.T.); +#501652 = EDGE_CURVE('',#501653,#501653,#501655,.T.); +#501653 = VERTEX_POINT('',#501654); +#501654 = CARTESIAN_POINT('',(132.55,-90.25,-5.E-02)); +#501655 = CIRCLE('',#501656,1.375); +#501656 = AXIS2_PLACEMENT_3D('',#501657,#501658,#501659); +#501657 = CARTESIAN_POINT('',(131.175,-90.25,-5.E-02)); +#501658 = DIRECTION('',(0.,0.,1.)); +#501659 = DIRECTION('',(1.,0.,-0.)); +#501660 = FACE_BOUND('',#501661,.T.); +#501661 = EDGE_LOOP('',(#501662)); +#501662 = ORIENTED_EDGE('',*,*,#501663,.T.); +#501663 = EDGE_CURVE('',#501664,#501664,#501666,.T.); +#501664 = VERTEX_POINT('',#501665); +#501665 = CARTESIAN_POINT('',(145.2,-90.25,-5.E-02)); +#501666 = CIRCLE('',#501667,1.375); +#501667 = AXIS2_PLACEMENT_3D('',#501668,#501669,#501670); +#501668 = CARTESIAN_POINT('',(143.825,-90.25,-5.E-02)); +#501669 = DIRECTION('',(0.,0.,1.)); +#501670 = DIRECTION('',(1.,0.,-0.)); +#501671 = FACE_BOUND('',#501672,.T.); +#501672 = EDGE_LOOP('',(#501673)); +#501673 = ORIENTED_EDGE('',*,*,#501674,.T.); +#501674 = EDGE_CURVE('',#501675,#501675,#501677,.T.); +#501675 = VERTEX_POINT('',#501676); +#501676 = CARTESIAN_POINT('',(122.2,-88.375,-5.E-02)); +#501677 = CIRCLE('',#501678,0.45); +#501678 = AXIS2_PLACEMENT_3D('',#501679,#501680,#501681); +#501679 = CARTESIAN_POINT('',(121.75,-88.375,-5.E-02)); +#501680 = DIRECTION('',(0.,0.,1.)); +#501681 = DIRECTION('',(1.,0.,-0.)); +#501682 = FACE_BOUND('',#501683,.T.); +#501683 = EDGE_LOOP('',(#501684)); +#501684 = ORIENTED_EDGE('',*,*,#501685,.T.); +#501685 = EDGE_CURVE('',#501686,#501686,#501688,.T.); +#501686 = VERTEX_POINT('',#501687); +#501687 = CARTESIAN_POINT('',(153.65,-88.375,-5.E-02)); +#501688 = CIRCLE('',#501689,0.45); +#501689 = AXIS2_PLACEMENT_3D('',#501690,#501691,#501692); +#501690 = CARTESIAN_POINT('',(153.2,-88.375,-5.E-02)); +#501691 = DIRECTION('',(0.,0.,1.)); +#501692 = DIRECTION('',(1.,0.,-0.)); +#501693 = FACE_BOUND('',#501694,.T.); +#501694 = EDGE_LOOP('',(#501695)); +#501695 = ORIENTED_EDGE('',*,*,#501696,.T.); +#501696 = EDGE_CURVE('',#501697,#501697,#501699,.T.); +#501697 = VERTEX_POINT('',#501698); +#501698 = CARTESIAN_POINT('',(136.124999,-86.52,-5.E-02)); +#501699 = CIRCLE('',#501700,1.124999); +#501700 = AXIS2_PLACEMENT_3D('',#501701,#501702,#501703); +#501701 = CARTESIAN_POINT('',(135.,-86.52,-5.E-02)); +#501702 = DIRECTION('',(0.,0.,1.)); +#501703 = DIRECTION('',(1.,0.,-0.)); +#501704 = FACE_BOUND('',#501705,.T.); +#501705 = EDGE_LOOP('',(#501706)); +#501706 = ORIENTED_EDGE('',*,*,#501707,.T.); +#501707 = EDGE_CURVE('',#501708,#501708,#501710,.T.); +#501708 = VERTEX_POINT('',#501709); +#501709 = CARTESIAN_POINT('',(138.624999,-86.52,-5.E-02)); +#501710 = CIRCLE('',#501711,1.124999); +#501711 = AXIS2_PLACEMENT_3D('',#501712,#501713,#501714); +#501712 = CARTESIAN_POINT('',(137.5,-86.52,-5.E-02)); +#501713 = DIRECTION('',(0.,0.,1.)); +#501714 = DIRECTION('',(1.,0.,-0.)); +#501715 = FACE_BOUND('',#501716,.T.); +#501716 = EDGE_LOOP('',(#501717)); +#501717 = ORIENTED_EDGE('',*,*,#501718,.T.); +#501718 = EDGE_CURVE('',#501719,#501719,#501721,.T.); +#501719 = VERTEX_POINT('',#501720); +#501720 = CARTESIAN_POINT('',(141.124999,-86.52,-5.E-02)); +#501721 = CIRCLE('',#501722,1.124999); +#501722 = AXIS2_PLACEMENT_3D('',#501723,#501724,#501725); +#501723 = CARTESIAN_POINT('',(140.,-86.52,-5.E-02)); +#501724 = DIRECTION('',(0.,0.,1.)); +#501725 = DIRECTION('',(1.,0.,-0.)); +#501726 = FACE_BOUND('',#501727,.T.); +#501727 = EDGE_LOOP('',(#501728,#501739,#501747,#501756,#501764,#501773, + #501781,#501790)); +#501728 = ORIENTED_EDGE('',*,*,#501729,.T.); +#501729 = EDGE_CURVE('',#501730,#501732,#501734,.T.); +#501730 = VERTEX_POINT('',#501731); +#501731 = CARTESIAN_POINT('',(141.08,-79.23,-5.E-02)); +#501732 = VERTEX_POINT('',#501733); +#501733 = CARTESIAN_POINT('',(140.94,-79.09,-5.E-02)); +#501734 = CIRCLE('',#501735,0.139999827126); +#501735 = AXIS2_PLACEMENT_3D('',#501736,#501737,#501738); +#501736 = CARTESIAN_POINT('',(140.94000017287,-79.22999982712,-5.E-02)); +#501737 = DIRECTION('',(0.,0.,1.)); +#501738 = DIRECTION('',(0.999999999999,-1.234820146735E-06,0.)); +#501739 = ORIENTED_EDGE('',*,*,#501740,.T.); +#501740 = EDGE_CURVE('',#501732,#501741,#501743,.T.); +#501741 = VERTEX_POINT('',#501742); +#501742 = CARTESIAN_POINT('',(140.66,-79.09,-5.E-02)); +#501743 = LINE('',#501744,#501745); +#501744 = CARTESIAN_POINT('',(140.94,-79.09,-5.E-02)); +#501745 = VECTOR('',#501746,1.); +#501746 = DIRECTION('',(-1.,0.,0.)); +#501747 = ORIENTED_EDGE('',*,*,#501748,.T.); +#501748 = EDGE_CURVE('',#501741,#501749,#501751,.T.); +#501749 = VERTEX_POINT('',#501750); +#501750 = CARTESIAN_POINT('',(140.52,-79.23,-5.E-02)); +#501751 = CIRCLE('',#501752,0.139999827125); +#501752 = AXIS2_PLACEMENT_3D('',#501753,#501754,#501755); +#501753 = CARTESIAN_POINT('',(140.65999982712,-79.22999982712,-5.E-02)); +#501754 = DIRECTION('',(0.,0.,1.)); +#501755 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#501756 = ORIENTED_EDGE('',*,*,#501757,.T.); +#501757 = EDGE_CURVE('',#501749,#501758,#501760,.T.); +#501758 = VERTEX_POINT('',#501759); +#501759 = CARTESIAN_POINT('',(140.52,-79.57,-5.E-02)); +#501760 = LINE('',#501761,#501762); +#501761 = CARTESIAN_POINT('',(140.52,-79.23,-5.E-02)); +#501762 = VECTOR('',#501763,1.); +#501763 = DIRECTION('',(0.,-1.,0.)); +#501764 = ORIENTED_EDGE('',*,*,#501765,.T.); +#501765 = EDGE_CURVE('',#501758,#501766,#501768,.T.); +#501766 = VERTEX_POINT('',#501767); +#501767 = CARTESIAN_POINT('',(140.66,-79.71,-5.E-02)); +#501768 = CIRCLE('',#501769,0.139999827125); +#501769 = AXIS2_PLACEMENT_3D('',#501770,#501771,#501772); +#501770 = CARTESIAN_POINT('',(140.65999982712,-79.57000017287,-5.E-02)); +#501771 = DIRECTION('',(0.,0.,1.)); +#501772 = DIRECTION('',(-0.999999999999,1.23482055276E-06,0.)); +#501773 = ORIENTED_EDGE('',*,*,#501774,.T.); +#501774 = EDGE_CURVE('',#501766,#501775,#501777,.T.); +#501775 = VERTEX_POINT('',#501776); +#501776 = CARTESIAN_POINT('',(140.94,-79.71,-5.E-02)); +#501777 = LINE('',#501778,#501779); +#501778 = CARTESIAN_POINT('',(140.66,-79.71,-5.E-02)); +#501779 = VECTOR('',#501780,1.); +#501780 = DIRECTION('',(1.,0.,0.)); +#501781 = ORIENTED_EDGE('',*,*,#501782,.T.); +#501782 = EDGE_CURVE('',#501775,#501783,#501785,.T.); +#501783 = VERTEX_POINT('',#501784); +#501784 = CARTESIAN_POINT('',(141.08,-79.57,-5.E-02)); +#501785 = CIRCLE('',#501786,0.139999827126); +#501786 = AXIS2_PLACEMENT_3D('',#501787,#501788,#501789); +#501787 = CARTESIAN_POINT('',(140.94000017287,-79.57000017287,-5.E-02)); +#501788 = DIRECTION('',(0.,0.,1.)); +#501789 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#501790 = ORIENTED_EDGE('',*,*,#501791,.T.); +#501791 = EDGE_CURVE('',#501783,#501730,#501792,.T.); +#501792 = LINE('',#501793,#501794); +#501793 = CARTESIAN_POINT('',(141.08,-79.57,-5.E-02)); +#501794 = VECTOR('',#501795,1.); +#501795 = DIRECTION('',(0.,1.,0.)); +#501796 = FACE_BOUND('',#501797,.T.); +#501797 = EDGE_LOOP('',(#501798,#501809,#501817,#501826,#501834,#501843, + #501851,#501860)); +#501798 = ORIENTED_EDGE('',*,*,#501799,.T.); +#501799 = EDGE_CURVE('',#501800,#501802,#501804,.T.); +#501800 = VERTEX_POINT('',#501801); +#501801 = CARTESIAN_POINT('',(142.04,-79.23,-5.E-02)); +#501802 = VERTEX_POINT('',#501803); +#501803 = CARTESIAN_POINT('',(141.9,-79.09,-5.E-02)); +#501804 = CIRCLE('',#501805,0.139999827125); +#501805 = AXIS2_PLACEMENT_3D('',#501806,#501807,#501808); +#501806 = CARTESIAN_POINT('',(141.90000017287,-79.22999982712,-5.E-02)); +#501807 = DIRECTION('',(0.,0.,1.)); +#501808 = DIRECTION('',(0.999999999999,-1.23482055276E-06,0.)); +#501809 = ORIENTED_EDGE('',*,*,#501810,.T.); +#501810 = EDGE_CURVE('',#501802,#501811,#501813,.T.); +#501811 = VERTEX_POINT('',#501812); +#501812 = CARTESIAN_POINT('',(141.62,-79.09,-5.E-02)); +#501813 = LINE('',#501814,#501815); +#501814 = CARTESIAN_POINT('',(141.9,-79.09,-5.E-02)); +#501815 = VECTOR('',#501816,1.); +#501816 = DIRECTION('',(-1.,0.,0.)); +#501817 = ORIENTED_EDGE('',*,*,#501818,.T.); +#501818 = EDGE_CURVE('',#501811,#501819,#501821,.T.); +#501819 = VERTEX_POINT('',#501820); +#501820 = CARTESIAN_POINT('',(141.48,-79.23,-5.E-02)); +#501821 = CIRCLE('',#501822,0.139999827126); +#501822 = AXIS2_PLACEMENT_3D('',#501823,#501824,#501825); +#501823 = CARTESIAN_POINT('',(141.61999982712,-79.22999982712,-5.E-02)); +#501824 = DIRECTION('',(0.,0.,1.)); +#501825 = DIRECTION('',(1.234820248241E-06,0.999999999999,-0.)); +#501826 = ORIENTED_EDGE('',*,*,#501827,.T.); +#501827 = EDGE_CURVE('',#501819,#501828,#501830,.T.); +#501828 = VERTEX_POINT('',#501829); +#501829 = CARTESIAN_POINT('',(141.48,-79.57,-5.E-02)); +#501830 = LINE('',#501831,#501832); +#501831 = CARTESIAN_POINT('',(141.48,-79.23,-5.E-02)); +#501832 = VECTOR('',#501833,1.); +#501833 = DIRECTION('',(0.,-1.,0.)); +#501834 = ORIENTED_EDGE('',*,*,#501835,.T.); +#501835 = EDGE_CURVE('',#501828,#501836,#501838,.T.); +#501836 = VERTEX_POINT('',#501837); +#501837 = CARTESIAN_POINT('',(141.62,-79.71,-5.E-02)); +#501838 = CIRCLE('',#501839,0.139999827126); +#501839 = AXIS2_PLACEMENT_3D('',#501840,#501841,#501842); +#501840 = CARTESIAN_POINT('',(141.61999982712,-79.57000017287,-5.E-02)); +#501841 = DIRECTION('',(0.,0.,1.)); +#501842 = DIRECTION('',(-0.999999999999,1.234820146735E-06,0.)); +#501843 = ORIENTED_EDGE('',*,*,#501844,.T.); +#501844 = EDGE_CURVE('',#501836,#501845,#501847,.T.); +#501845 = VERTEX_POINT('',#501846); +#501846 = CARTESIAN_POINT('',(141.9,-79.71,-5.E-02)); +#501847 = LINE('',#501848,#501849); +#501848 = CARTESIAN_POINT('',(141.62,-79.71,-5.E-02)); +#501849 = VECTOR('',#501850,1.); +#501850 = DIRECTION('',(1.,0.,0.)); +#501851 = ORIENTED_EDGE('',*,*,#501852,.T.); +#501852 = EDGE_CURVE('',#501845,#501853,#501855,.T.); +#501853 = VERTEX_POINT('',#501854); +#501854 = CARTESIAN_POINT('',(142.04,-79.57,-5.E-02)); +#501855 = CIRCLE('',#501856,0.139999827125); +#501856 = AXIS2_PLACEMENT_3D('',#501857,#501858,#501859); +#501857 = CARTESIAN_POINT('',(141.90000017287,-79.57000017287,-5.E-02)); +#501858 = DIRECTION('',(0.,0.,1.)); +#501859 = DIRECTION('',(-1.234820451254E-06,-0.999999999999,0.)); +#501860 = ORIENTED_EDGE('',*,*,#501861,.T.); +#501861 = EDGE_CURVE('',#501853,#501800,#501862,.T.); +#501862 = LINE('',#501863,#501864); +#501863 = CARTESIAN_POINT('',(142.04,-79.57,-5.E-02)); +#501864 = VECTOR('',#501865,1.); +#501865 = DIRECTION('',(0.,1.,0.)); +#501866 = FACE_BOUND('',#501867,.T.); +#501867 = EDGE_LOOP('',(#501868,#501879,#501887,#501896,#501904,#501913, + #501921,#501930)); +#501868 = ORIENTED_EDGE('',*,*,#501869,.T.); +#501869 = EDGE_CURVE('',#501870,#501872,#501874,.T.); +#501870 = VERTEX_POINT('',#501871); +#501871 = CARTESIAN_POINT('',(140.975,-78.,-5.E-02)); +#501872 = VERTEX_POINT('',#501873); +#501873 = CARTESIAN_POINT('',(140.8875,-77.9125,-5.E-02)); +#501874 = CIRCLE('',#501875,8.749946518209E-02); +#501875 = AXIS2_PLACEMENT_3D('',#501876,#501877,#501878); +#501876 = CARTESIAN_POINT('',(140.88750053482,-77.99999946518,-5.E-02)); +#501877 = DIRECTION('',(0.,0.,1.)); +#501878 = DIRECTION('',(0.999999999981,-6.112260934916E-06,0.)); +#501879 = ORIENTED_EDGE('',*,*,#501880,.T.); +#501880 = EDGE_CURVE('',#501872,#501881,#501883,.T.); +#501881 = VERTEX_POINT('',#501882); +#501882 = CARTESIAN_POINT('',(140.7125,-77.9125,-5.E-02)); +#501883 = LINE('',#501884,#501885); +#501884 = CARTESIAN_POINT('',(140.8875,-77.9125,-5.E-02)); +#501885 = VECTOR('',#501886,1.); +#501886 = DIRECTION('',(-1.,0.,0.)); +#501887 = ORIENTED_EDGE('',*,*,#501888,.T.); +#501888 = EDGE_CURVE('',#501881,#501889,#501891,.T.); +#501889 = VERTEX_POINT('',#501890); +#501890 = CARTESIAN_POINT('',(140.625,-78.,-5.E-02)); +#501891 = CIRCLE('',#501892,8.749946518212E-02); +#501892 = AXIS2_PLACEMENT_3D('',#501893,#501894,#501895); +#501893 = CARTESIAN_POINT('',(140.71249946518,-77.99999946518,-5.E-02)); +#501894 = DIRECTION('',(0.,0.,1.)); +#501895 = DIRECTION('',(6.112260447681E-06,0.999999999981,-0.)); +#501896 = ORIENTED_EDGE('',*,*,#501897,.T.); +#501897 = EDGE_CURVE('',#501889,#501898,#501900,.T.); +#501898 = VERTEX_POINT('',#501899); +#501899 = CARTESIAN_POINT('',(140.625,-78.45,-5.E-02)); +#501900 = LINE('',#501901,#501902); +#501901 = CARTESIAN_POINT('',(140.625,-78.,-5.E-02)); +#501902 = VECTOR('',#501903,1.); +#501903 = DIRECTION('',(0.,-1.,0.)); +#501904 = ORIENTED_EDGE('',*,*,#501905,.T.); +#501905 = EDGE_CURVE('',#501898,#501906,#501908,.T.); +#501906 = VERTEX_POINT('',#501907); +#501907 = CARTESIAN_POINT('',(140.7125,-78.5375,-5.E-02)); +#501908 = CIRCLE('',#501909,8.74994651821E-02); +#501909 = AXIS2_PLACEMENT_3D('',#501910,#501911,#501912); +#501910 = CARTESIAN_POINT('',(140.71249946518,-78.45000053482,-5.E-02)); +#501911 = DIRECTION('',(0.,0.,1.)); +#501912 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#501913 = ORIENTED_EDGE('',*,*,#501914,.T.); +#501914 = EDGE_CURVE('',#501906,#501915,#501917,.T.); +#501915 = VERTEX_POINT('',#501916); +#501916 = CARTESIAN_POINT('',(140.8875,-78.5375,-5.E-02)); +#501917 = LINE('',#501918,#501919); +#501918 = CARTESIAN_POINT('',(140.7125,-78.5375,-5.E-02)); +#501919 = VECTOR('',#501920,1.); +#501920 = DIRECTION('',(1.,0.,0.)); +#501921 = ORIENTED_EDGE('',*,*,#501922,.T.); +#501922 = EDGE_CURVE('',#501915,#501923,#501925,.T.); +#501923 = VERTEX_POINT('',#501924); +#501924 = CARTESIAN_POINT('',(140.975,-78.45,-5.E-02)); +#501925 = CIRCLE('',#501926,8.749946518206E-02); +#501926 = AXIS2_PLACEMENT_3D('',#501927,#501928,#501929); +#501927 = CARTESIAN_POINT('',(140.88750053482,-78.45000053482,-5.E-02)); +#501928 = DIRECTION('',(0.,0.,1.)); +#501929 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#501930 = ORIENTED_EDGE('',*,*,#501931,.T.); +#501931 = EDGE_CURVE('',#501923,#501870,#501932,.T.); +#501932 = LINE('',#501933,#501934); +#501933 = CARTESIAN_POINT('',(140.975,-78.45,-5.E-02)); +#501934 = VECTOR('',#501935,1.); +#501935 = DIRECTION('',(0.,1.,0.)); +#501936 = FACE_BOUND('',#501937,.T.); +#501937 = EDGE_LOOP('',(#501938,#501949,#501957,#501966,#501974,#501983, + #501991,#502000)); +#501938 = ORIENTED_EDGE('',*,*,#501939,.T.); +#501939 = EDGE_CURVE('',#501940,#501942,#501944,.T.); +#501940 = VERTEX_POINT('',#501941); +#501941 = CARTESIAN_POINT('',(141.475,-78.,-5.E-02)); +#501942 = VERTEX_POINT('',#501943); +#501943 = CARTESIAN_POINT('',(141.3875,-77.9125,-5.E-02)); +#501944 = CIRCLE('',#501945,8.749946518209E-02); +#501945 = AXIS2_PLACEMENT_3D('',#501946,#501947,#501948); +#501946 = CARTESIAN_POINT('',(141.38750053482,-77.99999946518,-5.E-02)); +#501947 = DIRECTION('',(0.,0.,1.)); +#501948 = DIRECTION('',(0.999999999981,-6.112260934916E-06,0.)); +#501949 = ORIENTED_EDGE('',*,*,#501950,.T.); +#501950 = EDGE_CURVE('',#501942,#501951,#501953,.T.); +#501951 = VERTEX_POINT('',#501952); +#501952 = CARTESIAN_POINT('',(141.2125,-77.9125,-5.E-02)); +#501953 = LINE('',#501954,#501955); +#501954 = CARTESIAN_POINT('',(141.3875,-77.9125,-5.E-02)); +#501955 = VECTOR('',#501956,1.); +#501956 = DIRECTION('',(-1.,0.,0.)); +#501957 = ORIENTED_EDGE('',*,*,#501958,.T.); +#501958 = EDGE_CURVE('',#501951,#501959,#501961,.T.); +#501959 = VERTEX_POINT('',#501960); +#501960 = CARTESIAN_POINT('',(141.125,-78.,-5.E-02)); +#501961 = CIRCLE('',#501962,8.749946518212E-02); +#501962 = AXIS2_PLACEMENT_3D('',#501963,#501964,#501965); +#501963 = CARTESIAN_POINT('',(141.21249946518,-77.99999946518,-5.E-02)); +#501964 = DIRECTION('',(0.,0.,1.)); +#501965 = DIRECTION('',(6.112260447681E-06,0.999999999981,-0.)); +#501966 = ORIENTED_EDGE('',*,*,#501967,.T.); +#501967 = EDGE_CURVE('',#501959,#501968,#501970,.T.); +#501968 = VERTEX_POINT('',#501969); +#501969 = CARTESIAN_POINT('',(141.125,-78.45,-5.E-02)); +#501970 = LINE('',#501971,#501972); +#501971 = CARTESIAN_POINT('',(141.125,-78.,-5.E-02)); +#501972 = VECTOR('',#501973,1.); +#501973 = DIRECTION('',(0.,-1.,0.)); +#501974 = ORIENTED_EDGE('',*,*,#501975,.T.); +#501975 = EDGE_CURVE('',#501968,#501976,#501978,.T.); +#501976 = VERTEX_POINT('',#501977); +#501977 = CARTESIAN_POINT('',(141.2125,-78.5375,-5.E-02)); +#501978 = CIRCLE('',#501979,8.74994651821E-02); +#501979 = AXIS2_PLACEMENT_3D('',#501980,#501981,#501982); +#501980 = CARTESIAN_POINT('',(141.21249946518,-78.45000053482,-5.E-02)); +#501981 = DIRECTION('',(0.,0.,1.)); +#501982 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#501983 = ORIENTED_EDGE('',*,*,#501984,.T.); +#501984 = EDGE_CURVE('',#501976,#501985,#501987,.T.); +#501985 = VERTEX_POINT('',#501986); +#501986 = CARTESIAN_POINT('',(141.3875,-78.5375,-5.E-02)); +#501987 = LINE('',#501988,#501989); +#501988 = CARTESIAN_POINT('',(141.2125,-78.5375,-5.E-02)); +#501989 = VECTOR('',#501990,1.); +#501990 = DIRECTION('',(1.,0.,0.)); +#501991 = ORIENTED_EDGE('',*,*,#501992,.T.); +#501992 = EDGE_CURVE('',#501985,#501993,#501995,.T.); +#501993 = VERTEX_POINT('',#501994); +#501994 = CARTESIAN_POINT('',(141.475,-78.45,-5.E-02)); +#501995 = CIRCLE('',#501996,8.749946518206E-02); +#501996 = AXIS2_PLACEMENT_3D('',#501997,#501998,#501999); +#501997 = CARTESIAN_POINT('',(141.38750053482,-78.45000053482,-5.E-02)); +#501998 = DIRECTION('',(0.,0.,1.)); +#501999 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502000 = ORIENTED_EDGE('',*,*,#502001,.T.); +#502001 = EDGE_CURVE('',#501993,#501940,#502002,.T.); +#502002 = LINE('',#502003,#502004); +#502003 = CARTESIAN_POINT('',(141.475,-78.45,-5.E-02)); +#502004 = VECTOR('',#502005,1.); +#502005 = DIRECTION('',(0.,1.,0.)); +#502006 = FACE_BOUND('',#502007,.T.); +#502007 = EDGE_LOOP('',(#502008,#502019,#502027,#502036,#502044,#502053, + #502061,#502070)); +#502008 = ORIENTED_EDGE('',*,*,#502009,.T.); +#502009 = EDGE_CURVE('',#502010,#502012,#502014,.T.); +#502010 = VERTEX_POINT('',#502011); +#502011 = CARTESIAN_POINT('',(141.975,-78.,-5.E-02)); +#502012 = VERTEX_POINT('',#502013); +#502013 = CARTESIAN_POINT('',(141.8875,-77.9125,-5.E-02)); +#502014 = CIRCLE('',#502015,8.749946518209E-02); +#502015 = AXIS2_PLACEMENT_3D('',#502016,#502017,#502018); +#502016 = CARTESIAN_POINT('',(141.88750053482,-77.99999946518,-5.E-02)); +#502017 = DIRECTION('',(0.,0.,1.)); +#502018 = DIRECTION('',(0.999999999981,-6.112260934916E-06,0.)); +#502019 = ORIENTED_EDGE('',*,*,#502020,.T.); +#502020 = EDGE_CURVE('',#502012,#502021,#502023,.T.); +#502021 = VERTEX_POINT('',#502022); +#502022 = CARTESIAN_POINT('',(141.7125,-77.9125,-5.E-02)); +#502023 = LINE('',#502024,#502025); +#502024 = CARTESIAN_POINT('',(141.8875,-77.9125,-5.E-02)); +#502025 = VECTOR('',#502026,1.); +#502026 = DIRECTION('',(-1.,0.,0.)); +#502027 = ORIENTED_EDGE('',*,*,#502028,.T.); +#502028 = EDGE_CURVE('',#502021,#502029,#502031,.T.); +#502029 = VERTEX_POINT('',#502030); +#502030 = CARTESIAN_POINT('',(141.625,-78.,-5.E-02)); +#502031 = CIRCLE('',#502032,8.749946518212E-02); +#502032 = AXIS2_PLACEMENT_3D('',#502033,#502034,#502035); +#502033 = CARTESIAN_POINT('',(141.71249946518,-77.99999946518,-5.E-02)); +#502034 = DIRECTION('',(0.,0.,1.)); +#502035 = DIRECTION('',(6.112260447681E-06,0.999999999981,-0.)); +#502036 = ORIENTED_EDGE('',*,*,#502037,.T.); +#502037 = EDGE_CURVE('',#502029,#502038,#502040,.T.); +#502038 = VERTEX_POINT('',#502039); +#502039 = CARTESIAN_POINT('',(141.625,-78.45,-5.E-02)); +#502040 = LINE('',#502041,#502042); +#502041 = CARTESIAN_POINT('',(141.625,-78.,-5.E-02)); +#502042 = VECTOR('',#502043,1.); +#502043 = DIRECTION('',(0.,-1.,0.)); +#502044 = ORIENTED_EDGE('',*,*,#502045,.T.); +#502045 = EDGE_CURVE('',#502038,#502046,#502048,.T.); +#502046 = VERTEX_POINT('',#502047); +#502047 = CARTESIAN_POINT('',(141.7125,-78.5375,-5.E-02)); +#502048 = CIRCLE('',#502049,8.74994651821E-02); +#502049 = AXIS2_PLACEMENT_3D('',#502050,#502051,#502052); +#502050 = CARTESIAN_POINT('',(141.71249946518,-78.45000053482,-5.E-02)); +#502051 = DIRECTION('',(0.,0.,1.)); +#502052 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#502053 = ORIENTED_EDGE('',*,*,#502054,.T.); +#502054 = EDGE_CURVE('',#502046,#502055,#502057,.T.); +#502055 = VERTEX_POINT('',#502056); +#502056 = CARTESIAN_POINT('',(141.8875,-78.5375,-5.E-02)); +#502057 = LINE('',#502058,#502059); +#502058 = CARTESIAN_POINT('',(141.7125,-78.5375,-5.E-02)); +#502059 = VECTOR('',#502060,1.); +#502060 = DIRECTION('',(1.,0.,0.)); +#502061 = ORIENTED_EDGE('',*,*,#502062,.T.); +#502062 = EDGE_CURVE('',#502055,#502063,#502065,.T.); +#502063 = VERTEX_POINT('',#502064); +#502064 = CARTESIAN_POINT('',(141.975,-78.45,-5.E-02)); +#502065 = CIRCLE('',#502066,8.749946518206E-02); +#502066 = AXIS2_PLACEMENT_3D('',#502067,#502068,#502069); +#502067 = CARTESIAN_POINT('',(141.88750053482,-78.45000053482,-5.E-02)); +#502068 = DIRECTION('',(0.,0.,1.)); +#502069 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502070 = ORIENTED_EDGE('',*,*,#502071,.T.); +#502071 = EDGE_CURVE('',#502063,#502010,#502072,.T.); +#502072 = LINE('',#502073,#502074); +#502073 = CARTESIAN_POINT('',(141.975,-78.45,-5.E-02)); +#502074 = VECTOR('',#502075,1.); +#502075 = DIRECTION('',(0.,1.,0.)); +#502076 = FACE_BOUND('',#502077,.T.); +#502077 = EDGE_LOOP('',(#502078,#502089,#502097,#502106,#502114,#502123, + #502131,#502140)); +#502078 = ORIENTED_EDGE('',*,*,#502079,.T.); +#502079 = EDGE_CURVE('',#502080,#502082,#502084,.T.); +#502080 = VERTEX_POINT('',#502081); +#502081 = CARTESIAN_POINT('',(137.875,-77.725,-5.E-02)); +#502082 = VERTEX_POINT('',#502083); +#502083 = CARTESIAN_POINT('',(137.65,-77.5,-5.E-02)); +#502084 = CIRCLE('',#502085,0.225000087974); +#502085 = AXIS2_PLACEMENT_3D('',#502086,#502087,#502088); +#502086 = CARTESIAN_POINT('',(137.64999991202,-77.72500008797,-5.E-02)); +#502087 = DIRECTION('',(0.,0.,1.)); +#502088 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#502089 = ORIENTED_EDGE('',*,*,#502090,.T.); +#502090 = EDGE_CURVE('',#502082,#502091,#502093,.T.); +#502091 = VERTEX_POINT('',#502092); +#502092 = CARTESIAN_POINT('',(137.15,-77.5,-5.E-02)); +#502093 = LINE('',#502094,#502095); +#502094 = CARTESIAN_POINT('',(137.65,-77.5,-5.E-02)); +#502095 = VECTOR('',#502096,1.); +#502096 = DIRECTION('',(-1.,0.,0.)); +#502097 = ORIENTED_EDGE('',*,*,#502098,.T.); +#502098 = EDGE_CURVE('',#502091,#502099,#502101,.T.); +#502099 = VERTEX_POINT('',#502100); +#502100 = CARTESIAN_POINT('',(136.925,-77.725,-5.E-02)); +#502101 = CIRCLE('',#502102,0.225000087974); +#502102 = AXIS2_PLACEMENT_3D('',#502103,#502104,#502105); +#502103 = CARTESIAN_POINT('',(137.15000008797,-77.72500008797,-5.E-02)); +#502104 = DIRECTION('',(0.,0.,1.)); +#502105 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#502106 = ORIENTED_EDGE('',*,*,#502107,.T.); +#502107 = EDGE_CURVE('',#502099,#502108,#502110,.T.); +#502108 = VERTEX_POINT('',#502109); +#502109 = CARTESIAN_POINT('',(136.925,-78.175,-5.E-02)); +#502110 = LINE('',#502111,#502112); +#502111 = CARTESIAN_POINT('',(136.925,-77.725,-5.E-02)); +#502112 = VECTOR('',#502113,1.); +#502113 = DIRECTION('',(0.,-1.,0.)); +#502114 = ORIENTED_EDGE('',*,*,#502115,.T.); +#502115 = EDGE_CURVE('',#502108,#502116,#502118,.T.); +#502116 = VERTEX_POINT('',#502117); +#502117 = CARTESIAN_POINT('',(137.15,-78.4,-5.E-02)); +#502118 = CIRCLE('',#502119,0.225000087974); +#502119 = AXIS2_PLACEMENT_3D('',#502120,#502121,#502122); +#502120 = CARTESIAN_POINT('',(137.15000008797,-78.17499991202,-5.E-02)); +#502121 = DIRECTION('',(0.,0.,1.)); +#502122 = DIRECTION('',(-1.,-3.909953458166E-07,0.)); +#502123 = ORIENTED_EDGE('',*,*,#502124,.T.); +#502124 = EDGE_CURVE('',#502116,#502125,#502127,.T.); +#502125 = VERTEX_POINT('',#502126); +#502126 = CARTESIAN_POINT('',(137.65,-78.4,-5.E-02)); +#502127 = LINE('',#502128,#502129); +#502128 = CARTESIAN_POINT('',(137.15,-78.4,-5.E-02)); +#502129 = VECTOR('',#502130,1.); +#502130 = DIRECTION('',(1.,0.,0.)); +#502131 = ORIENTED_EDGE('',*,*,#502132,.T.); +#502132 = EDGE_CURVE('',#502125,#502133,#502135,.T.); +#502133 = VERTEX_POINT('',#502134); +#502134 = CARTESIAN_POINT('',(137.875,-78.175,-5.E-02)); +#502135 = CIRCLE('',#502136,0.225000087974); +#502136 = AXIS2_PLACEMENT_3D('',#502137,#502138,#502139); +#502137 = CARTESIAN_POINT('',(137.64999991202,-78.17499991202,-5.E-02)); +#502138 = DIRECTION('',(0.,0.,1.)); +#502139 = DIRECTION('',(3.909954089759E-07,-1.,0.)); +#502140 = ORIENTED_EDGE('',*,*,#502141,.T.); +#502141 = EDGE_CURVE('',#502133,#502080,#502142,.T.); +#502142 = LINE('',#502143,#502144); +#502143 = CARTESIAN_POINT('',(137.875,-78.175,-5.E-02)); +#502144 = VECTOR('',#502145,1.); +#502145 = DIRECTION('',(0.,1.,0.)); +#502146 = FACE_BOUND('',#502147,.T.); +#502147 = EDGE_LOOP('',(#502148,#502159,#502167,#502176,#502184,#502193, + #502201,#502210)); +#502148 = ORIENTED_EDGE('',*,*,#502149,.T.); +#502149 = EDGE_CURVE('',#502150,#502152,#502154,.T.); +#502150 = VERTEX_POINT('',#502151); +#502151 = CARTESIAN_POINT('',(153.1,-76.875,-5.E-02)); +#502152 = VERTEX_POINT('',#502153); +#502153 = CARTESIAN_POINT('',(152.85,-76.625,-5.E-02)); +#502154 = CIRCLE('',#502155,0.249998959685); +#502155 = AXIS2_PLACEMENT_3D('',#502156,#502157,#502158); +#502156 = CARTESIAN_POINT('',(152.85000104031,-76.87499895968,-5.E-02)); +#502157 = DIRECTION('',(0.,0.,1.)); +#502158 = DIRECTION('',(0.999999999991,-4.161285950754E-06,0.)); +#502159 = ORIENTED_EDGE('',*,*,#502160,.T.); +#502160 = EDGE_CURVE('',#502152,#502161,#502163,.T.); +#502161 = VERTEX_POINT('',#502162); +#502162 = CARTESIAN_POINT('',(152.15,-76.625,-5.E-02)); +#502163 = LINE('',#502164,#502165); +#502164 = CARTESIAN_POINT('',(152.85,-76.625,-5.E-02)); +#502165 = VECTOR('',#502166,1.); +#502166 = DIRECTION('',(-1.,0.,0.)); +#502167 = ORIENTED_EDGE('',*,*,#502168,.T.); +#502168 = EDGE_CURVE('',#502161,#502169,#502171,.T.); +#502169 = VERTEX_POINT('',#502170); +#502170 = CARTESIAN_POINT('',(151.9,-76.875,-5.E-02)); +#502171 = CIRCLE('',#502172,0.249998959685); +#502172 = AXIS2_PLACEMENT_3D('',#502173,#502174,#502175); +#502173 = CARTESIAN_POINT('',(152.14999895968,-76.87499895968,-5.E-02)); +#502174 = DIRECTION('',(0.,0.,1.)); +#502175 = DIRECTION('',(4.161285950754E-06,0.999999999991,-0.)); +#502176 = ORIENTED_EDGE('',*,*,#502177,.T.); +#502177 = EDGE_CURVE('',#502169,#502178,#502180,.T.); +#502178 = VERTEX_POINT('',#502179); +#502179 = CARTESIAN_POINT('',(151.9,-78.125,-5.E-02)); +#502180 = LINE('',#502181,#502182); +#502181 = CARTESIAN_POINT('',(151.9,-76.875,-5.E-02)); +#502182 = VECTOR('',#502183,1.); +#502183 = DIRECTION('',(0.,-1.,0.)); +#502184 = ORIENTED_EDGE('',*,*,#502185,.T.); +#502185 = EDGE_CURVE('',#502178,#502186,#502188,.T.); +#502186 = VERTEX_POINT('',#502187); +#502187 = CARTESIAN_POINT('',(152.15,-78.375,-5.E-02)); +#502188 = CIRCLE('',#502189,0.249998959685); +#502189 = AXIS2_PLACEMENT_3D('',#502190,#502191,#502192); +#502190 = CARTESIAN_POINT('',(152.14999895968,-78.12500104031,-5.E-02)); +#502191 = DIRECTION('',(0.,0.,1.)); +#502192 = DIRECTION('',(-0.999999999991,4.161285950754E-06,0.)); +#502193 = ORIENTED_EDGE('',*,*,#502194,.T.); +#502194 = EDGE_CURVE('',#502186,#502195,#502197,.T.); +#502195 = VERTEX_POINT('',#502196); +#502196 = CARTESIAN_POINT('',(152.85,-78.375,-5.E-02)); +#502197 = LINE('',#502198,#502199); +#502198 = CARTESIAN_POINT('',(152.15,-78.375,-5.E-02)); +#502199 = VECTOR('',#502200,1.); +#502200 = DIRECTION('',(1.,0.,0.)); +#502201 = ORIENTED_EDGE('',*,*,#502202,.T.); +#502202 = EDGE_CURVE('',#502195,#502203,#502205,.T.); +#502203 = VERTEX_POINT('',#502204); +#502204 = CARTESIAN_POINT('',(153.1,-78.125,-5.E-02)); +#502205 = CIRCLE('',#502206,0.249998959685); +#502206 = AXIS2_PLACEMENT_3D('',#502207,#502208,#502209); +#502207 = CARTESIAN_POINT('',(152.85000104031,-78.12500104031,-5.E-02)); +#502208 = DIRECTION('',(0.,0.,1.)); +#502209 = DIRECTION('',(-4.161285950754E-06,-0.999999999991,0.)); +#502210 = ORIENTED_EDGE('',*,*,#502211,.T.); +#502211 = EDGE_CURVE('',#502203,#502150,#502212,.T.); +#502212 = LINE('',#502213,#502214); +#502213 = CARTESIAN_POINT('',(153.1,-78.125,-5.E-02)); +#502214 = VECTOR('',#502215,1.); +#502215 = DIRECTION('',(0.,1.,0.)); +#502216 = FACE_BOUND('',#502217,.T.); +#502217 = EDGE_LOOP('',(#502218,#502229,#502237,#502246)); +#502218 = ORIENTED_EDGE('',*,*,#502219,.T.); +#502219 = EDGE_CURVE('',#502220,#502222,#502224,.T.); +#502220 = VERTEX_POINT('',#502221); +#502221 = CARTESIAN_POINT('',(149.9,-77.775,-5.E-02)); +#502222 = VERTEX_POINT('',#502223); +#502223 = CARTESIAN_POINT('',(151.1,-77.775,-5.E-02)); +#502224 = CIRCLE('',#502225,0.6); +#502225 = AXIS2_PLACEMENT_3D('',#502226,#502227,#502228); +#502226 = CARTESIAN_POINT('',(150.5,-77.77500012065,-5.E-02)); +#502227 = DIRECTION('',(0.,0.,1.)); +#502228 = DIRECTION('',(-1.,2.010883548564E-07,-0.)); +#502229 = ORIENTED_EDGE('',*,*,#502230,.T.); +#502230 = EDGE_CURVE('',#502222,#502231,#502233,.T.); +#502231 = VERTEX_POINT('',#502232); +#502232 = CARTESIAN_POINT('',(151.1,-77.225,-5.E-02)); +#502233 = LINE('',#502234,#502235); +#502234 = CARTESIAN_POINT('',(151.1,-77.775,-5.E-02)); +#502235 = VECTOR('',#502236,1.); +#502236 = DIRECTION('',(0.,1.,0.)); +#502237 = ORIENTED_EDGE('',*,*,#502238,.T.); +#502238 = EDGE_CURVE('',#502231,#502239,#502241,.T.); +#502239 = VERTEX_POINT('',#502240); +#502240 = CARTESIAN_POINT('',(149.9,-77.225,-5.E-02)); +#502241 = CIRCLE('',#502242,0.6); +#502242 = AXIS2_PLACEMENT_3D('',#502243,#502244,#502245); +#502243 = CARTESIAN_POINT('',(150.5,-77.22499938224,-5.E-02)); +#502244 = DIRECTION('',(0.,0.,1.)); +#502245 = DIRECTION('',(0.999999999999,-1.029586395399E-06,0.)); +#502246 = ORIENTED_EDGE('',*,*,#502247,.T.); +#502247 = EDGE_CURVE('',#502239,#502220,#502248,.T.); +#502248 = LINE('',#502249,#502250); +#502249 = CARTESIAN_POINT('',(149.9,-77.225,-5.E-02)); +#502250 = VECTOR('',#502251,1.); +#502251 = DIRECTION('',(0.,-1.,0.)); +#502252 = FACE_BOUND('',#502253,.T.); +#502253 = EDGE_LOOP('',(#502254,#502265,#502273,#502282,#502290,#502299, + #502307,#502316)); +#502254 = ORIENTED_EDGE('',*,*,#502255,.T.); +#502255 = EDGE_CURVE('',#502256,#502258,#502260,.T.); +#502256 = VERTEX_POINT('',#502257); +#502257 = CARTESIAN_POINT('',(140.45,-77.975,-5.E-02)); +#502258 = VERTEX_POINT('',#502259); +#502259 = CARTESIAN_POINT('',(140.3625,-77.8875,-5.E-02)); +#502260 = CIRCLE('',#502261,8.749946518204E-02); +#502261 = AXIS2_PLACEMENT_3D('',#502262,#502263,#502264); +#502262 = CARTESIAN_POINT('',(140.36250053482,-77.97499946518,-5.E-02)); +#502263 = DIRECTION('',(0.,0.,1.)); +#502264 = DIRECTION('',(0.999999999981,-6.11226109733E-06,0.)); +#502265 = ORIENTED_EDGE('',*,*,#502266,.T.); +#502266 = EDGE_CURVE('',#502258,#502267,#502269,.T.); +#502267 = VERTEX_POINT('',#502268); +#502268 = CARTESIAN_POINT('',(139.9125,-77.8875,-5.E-02)); +#502269 = LINE('',#502270,#502271); +#502270 = CARTESIAN_POINT('',(140.3625,-77.8875,-5.E-02)); +#502271 = VECTOR('',#502272,1.); +#502272 = DIRECTION('',(-1.,0.,0.)); +#502273 = ORIENTED_EDGE('',*,*,#502274,.T.); +#502274 = EDGE_CURVE('',#502267,#502275,#502277,.T.); +#502275 = VERTEX_POINT('',#502276); +#502276 = CARTESIAN_POINT('',(139.825,-77.975,-5.E-02)); +#502277 = CIRCLE('',#502278,8.74994651821E-02); +#502278 = AXIS2_PLACEMENT_3D('',#502279,#502280,#502281); +#502279 = CARTESIAN_POINT('',(139.91249946518,-77.97499946518,-5.E-02)); +#502280 = DIRECTION('',(0.,0.,1.)); +#502281 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#502282 = ORIENTED_EDGE('',*,*,#502283,.T.); +#502283 = EDGE_CURVE('',#502275,#502284,#502286,.T.); +#502284 = VERTEX_POINT('',#502285); +#502285 = CARTESIAN_POINT('',(139.825,-78.15,-5.E-02)); +#502286 = LINE('',#502287,#502288); +#502287 = CARTESIAN_POINT('',(139.825,-77.975,-5.E-02)); +#502288 = VECTOR('',#502289,1.); +#502289 = DIRECTION('',(0.,-1.,0.)); +#502290 = ORIENTED_EDGE('',*,*,#502291,.T.); +#502291 = EDGE_CURVE('',#502284,#502292,#502294,.T.); +#502292 = VERTEX_POINT('',#502293); +#502293 = CARTESIAN_POINT('',(139.9125,-78.2375,-5.E-02)); +#502294 = CIRCLE('',#502295,8.74994651821E-02); +#502295 = AXIS2_PLACEMENT_3D('',#502296,#502297,#502298); +#502296 = CARTESIAN_POINT('',(139.91249946518,-78.15000053482,-5.E-02)); +#502297 = DIRECTION('',(0.,0.,1.)); +#502298 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#502299 = ORIENTED_EDGE('',*,*,#502300,.T.); +#502300 = EDGE_CURVE('',#502292,#502301,#502303,.T.); +#502301 = VERTEX_POINT('',#502302); +#502302 = CARTESIAN_POINT('',(140.3625,-78.2375,-5.E-02)); +#502303 = LINE('',#502304,#502305); +#502304 = CARTESIAN_POINT('',(139.9125,-78.2375,-5.E-02)); +#502305 = VECTOR('',#502306,1.); +#502306 = DIRECTION('',(1.,0.,0.)); +#502307 = ORIENTED_EDGE('',*,*,#502308,.T.); +#502308 = EDGE_CURVE('',#502301,#502309,#502311,.T.); +#502309 = VERTEX_POINT('',#502310); +#502310 = CARTESIAN_POINT('',(140.45,-78.15,-5.E-02)); +#502311 = CIRCLE('',#502312,8.749946518204E-02); +#502312 = AXIS2_PLACEMENT_3D('',#502313,#502314,#502315); +#502313 = CARTESIAN_POINT('',(140.36250053482,-78.15000053482,-5.E-02)); +#502314 = DIRECTION('',(0.,0.,1.)); +#502315 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502316 = ORIENTED_EDGE('',*,*,#502317,.T.); +#502317 = EDGE_CURVE('',#502309,#502256,#502318,.T.); +#502318 = LINE('',#502319,#502320); +#502319 = CARTESIAN_POINT('',(140.45,-78.15,-5.E-02)); +#502320 = VECTOR('',#502321,1.); +#502321 = DIRECTION('',(0.,1.,0.)); +#502322 = FACE_BOUND('',#502323,.T.); +#502323 = EDGE_LOOP('',(#502324,#502335,#502343,#502352,#502360,#502369, + #502377,#502386)); +#502324 = ORIENTED_EDGE('',*,*,#502325,.T.); +#502325 = EDGE_CURVE('',#502326,#502328,#502330,.T.); +#502326 = VERTEX_POINT('',#502327); +#502327 = CARTESIAN_POINT('',(142.775,-77.975,-5.E-02)); +#502328 = VERTEX_POINT('',#502329); +#502329 = CARTESIAN_POINT('',(142.6875,-77.8875,-5.E-02)); +#502330 = CIRCLE('',#502331,8.749946518209E-02); +#502331 = AXIS2_PLACEMENT_3D('',#502332,#502333,#502334); +#502332 = CARTESIAN_POINT('',(142.68750053482,-77.97499946518,-5.E-02)); +#502333 = DIRECTION('',(0.,0.,1.)); +#502334 = DIRECTION('',(0.999999999981,-6.112260610094E-06,0.)); +#502335 = ORIENTED_EDGE('',*,*,#502336,.T.); +#502336 = EDGE_CURVE('',#502328,#502337,#502339,.T.); +#502337 = VERTEX_POINT('',#502338); +#502338 = CARTESIAN_POINT('',(142.2375,-77.8875,-5.E-02)); +#502339 = LINE('',#502340,#502341); +#502340 = CARTESIAN_POINT('',(142.6875,-77.8875,-5.E-02)); +#502341 = VECTOR('',#502342,1.); +#502342 = DIRECTION('',(-1.,0.,0.)); +#502343 = ORIENTED_EDGE('',*,*,#502344,.T.); +#502344 = EDGE_CURVE('',#502337,#502345,#502347,.T.); +#502345 = VERTEX_POINT('',#502346); +#502346 = CARTESIAN_POINT('',(142.15,-77.975,-5.E-02)); +#502347 = CIRCLE('',#502348,8.749946518206E-02); +#502348 = AXIS2_PLACEMENT_3D('',#502349,#502350,#502351); +#502349 = CARTESIAN_POINT('',(142.23749946518,-77.97499946518,-5.E-02)); +#502350 = DIRECTION('',(0.,0.,1.)); +#502351 = DIRECTION('',(6.112261097329E-06,0.999999999981,-0.)); +#502352 = ORIENTED_EDGE('',*,*,#502353,.T.); +#502353 = EDGE_CURVE('',#502345,#502354,#502356,.T.); +#502354 = VERTEX_POINT('',#502355); +#502355 = CARTESIAN_POINT('',(142.15,-78.15,-5.E-02)); +#502356 = LINE('',#502357,#502358); +#502357 = CARTESIAN_POINT('',(142.15,-77.975,-5.E-02)); +#502358 = VECTOR('',#502359,1.); +#502359 = DIRECTION('',(0.,-1.,0.)); +#502360 = ORIENTED_EDGE('',*,*,#502361,.T.); +#502361 = EDGE_CURVE('',#502354,#502362,#502364,.T.); +#502362 = VERTEX_POINT('',#502363); +#502363 = CARTESIAN_POINT('',(142.2375,-78.2375,-5.E-02)); +#502364 = CIRCLE('',#502365,8.749946518206E-02); +#502365 = AXIS2_PLACEMENT_3D('',#502366,#502367,#502368); +#502366 = CARTESIAN_POINT('',(142.23749946518,-78.15000053482,-5.E-02)); +#502367 = DIRECTION('',(0.,0.,1.)); +#502368 = DIRECTION('',(-0.999999999981,6.112261097328E-06,0.)); +#502369 = ORIENTED_EDGE('',*,*,#502370,.T.); +#502370 = EDGE_CURVE('',#502362,#502371,#502373,.T.); +#502371 = VERTEX_POINT('',#502372); +#502372 = CARTESIAN_POINT('',(142.6875,-78.2375,-5.E-02)); +#502373 = LINE('',#502374,#502375); +#502374 = CARTESIAN_POINT('',(142.2375,-78.2375,-5.E-02)); +#502375 = VECTOR('',#502376,1.); +#502376 = DIRECTION('',(1.,0.,0.)); +#502377 = ORIENTED_EDGE('',*,*,#502378,.T.); +#502378 = EDGE_CURVE('',#502371,#502379,#502381,.T.); +#502379 = VERTEX_POINT('',#502380); +#502380 = CARTESIAN_POINT('',(142.775,-78.15,-5.E-02)); +#502381 = CIRCLE('',#502382,8.749946518209E-02); +#502382 = AXIS2_PLACEMENT_3D('',#502383,#502384,#502385); +#502383 = CARTESIAN_POINT('',(142.68750053482,-78.15000053482,-5.E-02)); +#502384 = DIRECTION('',(0.,0.,1.)); +#502385 = DIRECTION('',(-6.112260772505E-06,-0.999999999981,0.)); +#502386 = ORIENTED_EDGE('',*,*,#502387,.T.); +#502387 = EDGE_CURVE('',#502379,#502326,#502388,.T.); +#502388 = LINE('',#502389,#502390); +#502389 = CARTESIAN_POINT('',(142.775,-78.15,-5.E-02)); +#502390 = VECTOR('',#502391,1.); +#502391 = DIRECTION('',(0.,1.,0.)); +#502392 = FACE_BOUND('',#502393,.T.); +#502393 = EDGE_LOOP('',(#502394,#502405,#502413,#502422,#502430,#502439, + #502447,#502456)); +#502394 = ORIENTED_EDGE('',*,*,#502395,.T.); +#502395 = EDGE_CURVE('',#502396,#502398,#502400,.T.); +#502396 = VERTEX_POINT('',#502397); +#502397 = CARTESIAN_POINT('',(139.11,-77.515,-5.E-02)); +#502398 = VERTEX_POINT('',#502399); +#502399 = CARTESIAN_POINT('',(138.97,-77.375,-5.E-02)); +#502400 = CIRCLE('',#502401,0.139999827125); +#502401 = AXIS2_PLACEMENT_3D('',#502402,#502403,#502404); +#502402 = CARTESIAN_POINT('',(138.97000017287,-77.51499982712,-5.E-02)); +#502403 = DIRECTION('',(0.,0.,1.)); +#502404 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#502405 = ORIENTED_EDGE('',*,*,#502406,.T.); +#502406 = EDGE_CURVE('',#502398,#502407,#502409,.T.); +#502407 = VERTEX_POINT('',#502408); +#502408 = CARTESIAN_POINT('',(138.63,-77.375,-5.E-02)); +#502409 = LINE('',#502410,#502411); +#502410 = CARTESIAN_POINT('',(138.97,-77.375,-5.E-02)); +#502411 = VECTOR('',#502412,1.); +#502412 = DIRECTION('',(-1.,0.,0.)); +#502413 = ORIENTED_EDGE('',*,*,#502414,.T.); +#502414 = EDGE_CURVE('',#502407,#502415,#502417,.T.); +#502415 = VERTEX_POINT('',#502416); +#502416 = CARTESIAN_POINT('',(138.49,-77.515,-5.E-02)); +#502417 = CIRCLE('',#502418,0.139999827125); +#502418 = AXIS2_PLACEMENT_3D('',#502419,#502420,#502421); +#502419 = CARTESIAN_POINT('',(138.62999982712,-77.51499982712,-5.E-02)); +#502420 = DIRECTION('',(0.,0.,1.)); +#502421 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#502422 = ORIENTED_EDGE('',*,*,#502423,.T.); +#502423 = EDGE_CURVE('',#502415,#502424,#502426,.T.); +#502424 = VERTEX_POINT('',#502425); +#502425 = CARTESIAN_POINT('',(138.49,-77.795,-5.E-02)); +#502426 = LINE('',#502427,#502428); +#502427 = CARTESIAN_POINT('',(138.49,-77.515,-5.E-02)); +#502428 = VECTOR('',#502429,1.); +#502429 = DIRECTION('',(0.,-1.,0.)); +#502430 = ORIENTED_EDGE('',*,*,#502431,.T.); +#502431 = EDGE_CURVE('',#502424,#502432,#502434,.T.); +#502432 = VERTEX_POINT('',#502433); +#502433 = CARTESIAN_POINT('',(138.63,-77.935,-5.E-02)); +#502434 = CIRCLE('',#502435,0.139999827125); +#502435 = AXIS2_PLACEMENT_3D('',#502436,#502437,#502438); +#502436 = CARTESIAN_POINT('',(138.62999982712,-77.79500017287,-5.E-02)); +#502437 = DIRECTION('',(0.,0.,1.)); +#502438 = DIRECTION('',(-0.999999999999,1.23482055276E-06,0.)); +#502439 = ORIENTED_EDGE('',*,*,#502440,.T.); +#502440 = EDGE_CURVE('',#502432,#502441,#502443,.T.); +#502441 = VERTEX_POINT('',#502442); +#502442 = CARTESIAN_POINT('',(138.97,-77.935,-5.E-02)); +#502443 = LINE('',#502444,#502445); +#502444 = CARTESIAN_POINT('',(138.63,-77.935,-5.E-02)); +#502445 = VECTOR('',#502446,1.); +#502446 = DIRECTION('',(1.,0.,0.)); +#502447 = ORIENTED_EDGE('',*,*,#502448,.T.); +#502448 = EDGE_CURVE('',#502441,#502449,#502451,.T.); +#502449 = VERTEX_POINT('',#502450); +#502450 = CARTESIAN_POINT('',(139.11,-77.795,-5.E-02)); +#502451 = CIRCLE('',#502452,0.139999827125); +#502452 = AXIS2_PLACEMENT_3D('',#502453,#502454,#502455); +#502453 = CARTESIAN_POINT('',(138.97000017287,-77.79500017287,-5.E-02)); +#502454 = DIRECTION('',(0.,0.,1.)); +#502455 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#502456 = ORIENTED_EDGE('',*,*,#502457,.T.); +#502457 = EDGE_CURVE('',#502449,#502396,#502458,.T.); +#502458 = LINE('',#502459,#502460); +#502459 = CARTESIAN_POINT('',(139.11,-77.795,-5.E-02)); +#502460 = VECTOR('',#502461,1.); +#502461 = DIRECTION('',(0.,1.,0.)); +#502462 = FACE_BOUND('',#502463,.T.); +#502463 = EDGE_LOOP('',(#502464,#502475,#502483,#502492,#502500,#502509, + #502517,#502526)); +#502464 = ORIENTED_EDGE('',*,*,#502465,.T.); +#502465 = EDGE_CURVE('',#502466,#502468,#502470,.T.); +#502466 = VERTEX_POINT('',#502467); +#502467 = CARTESIAN_POINT('',(140.45,-77.475,-5.E-02)); +#502468 = VERTEX_POINT('',#502469); +#502469 = CARTESIAN_POINT('',(140.3625,-77.3875,-5.E-02)); +#502470 = CIRCLE('',#502471,8.749946518204E-02); +#502471 = AXIS2_PLACEMENT_3D('',#502472,#502473,#502474); +#502472 = CARTESIAN_POINT('',(140.36250053482,-77.47499946518,-5.E-02)); +#502473 = DIRECTION('',(0.,0.,1.)); +#502474 = DIRECTION('',(0.999999999981,-6.11226109733E-06,0.)); +#502475 = ORIENTED_EDGE('',*,*,#502476,.T.); +#502476 = EDGE_CURVE('',#502468,#502477,#502479,.T.); +#502477 = VERTEX_POINT('',#502478); +#502478 = CARTESIAN_POINT('',(139.9125,-77.3875,-5.E-02)); +#502479 = LINE('',#502480,#502481); +#502480 = CARTESIAN_POINT('',(140.3625,-77.3875,-5.E-02)); +#502481 = VECTOR('',#502482,1.); +#502482 = DIRECTION('',(-1.,0.,0.)); +#502483 = ORIENTED_EDGE('',*,*,#502484,.T.); +#502484 = EDGE_CURVE('',#502477,#502485,#502487,.T.); +#502485 = VERTEX_POINT('',#502486); +#502486 = CARTESIAN_POINT('',(139.825,-77.475,-5.E-02)); +#502487 = CIRCLE('',#502488,8.74994651821E-02); +#502488 = AXIS2_PLACEMENT_3D('',#502489,#502490,#502491); +#502489 = CARTESIAN_POINT('',(139.91249946518,-77.47499946518,-5.E-02)); +#502490 = DIRECTION('',(0.,0.,1.)); +#502491 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#502492 = ORIENTED_EDGE('',*,*,#502493,.T.); +#502493 = EDGE_CURVE('',#502485,#502494,#502496,.T.); +#502494 = VERTEX_POINT('',#502495); +#502495 = CARTESIAN_POINT('',(139.825,-77.65,-5.E-02)); +#502496 = LINE('',#502497,#502498); +#502497 = CARTESIAN_POINT('',(139.825,-77.475,-5.E-02)); +#502498 = VECTOR('',#502499,1.); +#502499 = DIRECTION('',(0.,-1.,0.)); +#502500 = ORIENTED_EDGE('',*,*,#502501,.T.); +#502501 = EDGE_CURVE('',#502494,#502502,#502504,.T.); +#502502 = VERTEX_POINT('',#502503); +#502503 = CARTESIAN_POINT('',(139.9125,-77.7375,-5.E-02)); +#502504 = CIRCLE('',#502505,8.74994651821E-02); +#502505 = AXIS2_PLACEMENT_3D('',#502506,#502507,#502508); +#502506 = CARTESIAN_POINT('',(139.91249946518,-77.65000053482,-5.E-02)); +#502507 = DIRECTION('',(0.,0.,1.)); +#502508 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#502509 = ORIENTED_EDGE('',*,*,#502510,.T.); +#502510 = EDGE_CURVE('',#502502,#502511,#502513,.T.); +#502511 = VERTEX_POINT('',#502512); +#502512 = CARTESIAN_POINT('',(140.3625,-77.7375,-5.E-02)); +#502513 = LINE('',#502514,#502515); +#502514 = CARTESIAN_POINT('',(139.9125,-77.7375,-5.E-02)); +#502515 = VECTOR('',#502516,1.); +#502516 = DIRECTION('',(1.,0.,0.)); +#502517 = ORIENTED_EDGE('',*,*,#502518,.T.); +#502518 = EDGE_CURVE('',#502511,#502519,#502521,.T.); +#502519 = VERTEX_POINT('',#502520); +#502520 = CARTESIAN_POINT('',(140.45,-77.65,-5.E-02)); +#502521 = CIRCLE('',#502522,8.749946518204E-02); +#502522 = AXIS2_PLACEMENT_3D('',#502523,#502524,#502525); +#502523 = CARTESIAN_POINT('',(140.36250053482,-77.65000053482,-5.E-02)); +#502524 = DIRECTION('',(0.,0.,1.)); +#502525 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502526 = ORIENTED_EDGE('',*,*,#502527,.T.); +#502527 = EDGE_CURVE('',#502519,#502466,#502528,.T.); +#502528 = LINE('',#502529,#502530); +#502529 = CARTESIAN_POINT('',(140.45,-77.65,-5.E-02)); +#502530 = VECTOR('',#502531,1.); +#502531 = DIRECTION('',(0.,1.,0.)); +#502532 = FACE_BOUND('',#502533,.T.); +#502533 = EDGE_LOOP('',(#502534,#502545,#502553,#502562,#502570,#502579, + #502587,#502596)); +#502534 = ORIENTED_EDGE('',*,*,#502535,.T.); +#502535 = EDGE_CURVE('',#502536,#502538,#502540,.T.); +#502536 = VERTEX_POINT('',#502537); +#502537 = CARTESIAN_POINT('',(142.775,-77.475,-5.E-02)); +#502538 = VERTEX_POINT('',#502539); +#502539 = CARTESIAN_POINT('',(142.6875,-77.3875,-5.E-02)); +#502540 = CIRCLE('',#502541,8.749946518209E-02); +#502541 = AXIS2_PLACEMENT_3D('',#502542,#502543,#502544); +#502542 = CARTESIAN_POINT('',(142.68750053482,-77.47499946518,-5.E-02)); +#502543 = DIRECTION('',(0.,0.,1.)); +#502544 = DIRECTION('',(0.999999999981,-6.112260610094E-06,0.)); +#502545 = ORIENTED_EDGE('',*,*,#502546,.T.); +#502546 = EDGE_CURVE('',#502538,#502547,#502549,.T.); +#502547 = VERTEX_POINT('',#502548); +#502548 = CARTESIAN_POINT('',(142.2375,-77.3875,-5.E-02)); +#502549 = LINE('',#502550,#502551); +#502550 = CARTESIAN_POINT('',(142.6875,-77.3875,-5.E-02)); +#502551 = VECTOR('',#502552,1.); +#502552 = DIRECTION('',(-1.,0.,0.)); +#502553 = ORIENTED_EDGE('',*,*,#502554,.T.); +#502554 = EDGE_CURVE('',#502547,#502555,#502557,.T.); +#502555 = VERTEX_POINT('',#502556); +#502556 = CARTESIAN_POINT('',(142.15,-77.475,-5.E-02)); +#502557 = CIRCLE('',#502558,8.749946518206E-02); +#502558 = AXIS2_PLACEMENT_3D('',#502559,#502560,#502561); +#502559 = CARTESIAN_POINT('',(142.23749946518,-77.47499946518,-5.E-02)); +#502560 = DIRECTION('',(0.,0.,1.)); +#502561 = DIRECTION('',(6.112261097329E-06,0.999999999981,-0.)); +#502562 = ORIENTED_EDGE('',*,*,#502563,.T.); +#502563 = EDGE_CURVE('',#502555,#502564,#502566,.T.); +#502564 = VERTEX_POINT('',#502565); +#502565 = CARTESIAN_POINT('',(142.15,-77.65,-5.E-02)); +#502566 = LINE('',#502567,#502568); +#502567 = CARTESIAN_POINT('',(142.15,-77.475,-5.E-02)); +#502568 = VECTOR('',#502569,1.); +#502569 = DIRECTION('',(0.,-1.,0.)); +#502570 = ORIENTED_EDGE('',*,*,#502571,.T.); +#502571 = EDGE_CURVE('',#502564,#502572,#502574,.T.); +#502572 = VERTEX_POINT('',#502573); +#502573 = CARTESIAN_POINT('',(142.2375,-77.7375,-5.E-02)); +#502574 = CIRCLE('',#502575,8.749946518206E-02); +#502575 = AXIS2_PLACEMENT_3D('',#502576,#502577,#502578); +#502576 = CARTESIAN_POINT('',(142.23749946518,-77.65000053482,-5.E-02)); +#502577 = DIRECTION('',(0.,0.,1.)); +#502578 = DIRECTION('',(-0.999999999981,6.112261097328E-06,0.)); +#502579 = ORIENTED_EDGE('',*,*,#502580,.T.); +#502580 = EDGE_CURVE('',#502572,#502581,#502583,.T.); +#502581 = VERTEX_POINT('',#502582); +#502582 = CARTESIAN_POINT('',(142.6875,-77.7375,-5.E-02)); +#502583 = LINE('',#502584,#502585); +#502584 = CARTESIAN_POINT('',(142.2375,-77.7375,-5.E-02)); +#502585 = VECTOR('',#502586,1.); +#502586 = DIRECTION('',(1.,0.,0.)); +#502587 = ORIENTED_EDGE('',*,*,#502588,.T.); +#502588 = EDGE_CURVE('',#502581,#502589,#502591,.T.); +#502589 = VERTEX_POINT('',#502590); +#502590 = CARTESIAN_POINT('',(142.775,-77.65,-5.E-02)); +#502591 = CIRCLE('',#502592,8.749946518209E-02); +#502592 = AXIS2_PLACEMENT_3D('',#502593,#502594,#502595); +#502593 = CARTESIAN_POINT('',(142.68750053482,-77.65000053482,-5.E-02)); +#502594 = DIRECTION('',(0.,0.,1.)); +#502595 = DIRECTION('',(-6.112260772505E-06,-0.999999999981,0.)); +#502596 = ORIENTED_EDGE('',*,*,#502597,.T.); +#502597 = EDGE_CURVE('',#502589,#502536,#502598,.T.); +#502598 = LINE('',#502599,#502600); +#502599 = CARTESIAN_POINT('',(142.775,-77.65,-5.E-02)); +#502600 = VECTOR('',#502601,1.); +#502601 = DIRECTION('',(0.,1.,0.)); +#502602 = FACE_BOUND('',#502603,.T.); +#502603 = EDGE_LOOP('',(#502604,#502615,#502623,#502632,#502640,#502649, + #502657,#502666)); +#502604 = ORIENTED_EDGE('',*,*,#502605,.T.); +#502605 = EDGE_CURVE('',#502606,#502608,#502610,.T.); +#502606 = VERTEX_POINT('',#502607); +#502607 = CARTESIAN_POINT('',(140.45,-76.975,-5.E-02)); +#502608 = VERTEX_POINT('',#502609); +#502609 = CARTESIAN_POINT('',(140.3625,-76.8875,-5.E-02)); +#502610 = CIRCLE('',#502611,8.749946518204E-02); +#502611 = AXIS2_PLACEMENT_3D('',#502612,#502613,#502614); +#502612 = CARTESIAN_POINT('',(140.36250053482,-76.97499946518,-5.E-02)); +#502613 = DIRECTION('',(0.,0.,1.)); +#502614 = DIRECTION('',(0.999999999981,-6.11226109733E-06,0.)); +#502615 = ORIENTED_EDGE('',*,*,#502616,.T.); +#502616 = EDGE_CURVE('',#502608,#502617,#502619,.T.); +#502617 = VERTEX_POINT('',#502618); +#502618 = CARTESIAN_POINT('',(139.9125,-76.8875,-5.E-02)); +#502619 = LINE('',#502620,#502621); +#502620 = CARTESIAN_POINT('',(140.3625,-76.8875,-5.E-02)); +#502621 = VECTOR('',#502622,1.); +#502622 = DIRECTION('',(-1.,0.,0.)); +#502623 = ORIENTED_EDGE('',*,*,#502624,.T.); +#502624 = EDGE_CURVE('',#502617,#502625,#502627,.T.); +#502625 = VERTEX_POINT('',#502626); +#502626 = CARTESIAN_POINT('',(139.825,-76.975,-5.E-02)); +#502627 = CIRCLE('',#502628,8.74994651821E-02); +#502628 = AXIS2_PLACEMENT_3D('',#502629,#502630,#502631); +#502629 = CARTESIAN_POINT('',(139.91249946518,-76.97499946518,-5.E-02)); +#502630 = DIRECTION('',(0.,0.,1.)); +#502631 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#502632 = ORIENTED_EDGE('',*,*,#502633,.T.); +#502633 = EDGE_CURVE('',#502625,#502634,#502636,.T.); +#502634 = VERTEX_POINT('',#502635); +#502635 = CARTESIAN_POINT('',(139.825,-77.15,-5.E-02)); +#502636 = LINE('',#502637,#502638); +#502637 = CARTESIAN_POINT('',(139.825,-76.975,-5.E-02)); +#502638 = VECTOR('',#502639,1.); +#502639 = DIRECTION('',(0.,-1.,0.)); +#502640 = ORIENTED_EDGE('',*,*,#502641,.T.); +#502641 = EDGE_CURVE('',#502634,#502642,#502644,.T.); +#502642 = VERTEX_POINT('',#502643); +#502643 = CARTESIAN_POINT('',(139.9125,-77.2375,-5.E-02)); +#502644 = CIRCLE('',#502645,8.74994651821E-02); +#502645 = AXIS2_PLACEMENT_3D('',#502646,#502647,#502648); +#502646 = CARTESIAN_POINT('',(139.91249946518,-77.15000053482,-5.E-02)); +#502647 = DIRECTION('',(0.,0.,1.)); +#502648 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#502649 = ORIENTED_EDGE('',*,*,#502650,.T.); +#502650 = EDGE_CURVE('',#502642,#502651,#502653,.T.); +#502651 = VERTEX_POINT('',#502652); +#502652 = CARTESIAN_POINT('',(140.3625,-77.2375,-5.E-02)); +#502653 = LINE('',#502654,#502655); +#502654 = CARTESIAN_POINT('',(139.9125,-77.2375,-5.E-02)); +#502655 = VECTOR('',#502656,1.); +#502656 = DIRECTION('',(1.,0.,0.)); +#502657 = ORIENTED_EDGE('',*,*,#502658,.T.); +#502658 = EDGE_CURVE('',#502651,#502659,#502661,.T.); +#502659 = VERTEX_POINT('',#502660); +#502660 = CARTESIAN_POINT('',(140.45,-77.15,-5.E-02)); +#502661 = CIRCLE('',#502662,8.749946518204E-02); +#502662 = AXIS2_PLACEMENT_3D('',#502663,#502664,#502665); +#502663 = CARTESIAN_POINT('',(140.36250053482,-77.15000053482,-5.E-02)); +#502664 = DIRECTION('',(0.,0.,1.)); +#502665 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502666 = ORIENTED_EDGE('',*,*,#502667,.T.); +#502667 = EDGE_CURVE('',#502659,#502606,#502668,.T.); +#502668 = LINE('',#502669,#502670); +#502669 = CARTESIAN_POINT('',(140.45,-77.15,-5.E-02)); +#502670 = VECTOR('',#502671,1.); +#502671 = DIRECTION('',(0.,1.,0.)); +#502672 = FACE_BOUND('',#502673,.T.); +#502673 = EDGE_LOOP('',(#502674,#502685,#502693,#502702,#502710,#502719, + #502727,#502736)); +#502674 = ORIENTED_EDGE('',*,*,#502675,.T.); +#502675 = EDGE_CURVE('',#502676,#502678,#502680,.T.); +#502676 = VERTEX_POINT('',#502677); +#502677 = CARTESIAN_POINT('',(142.775,-76.975,-5.E-02)); +#502678 = VERTEX_POINT('',#502679); +#502679 = CARTESIAN_POINT('',(142.6875,-76.8875,-5.E-02)); +#502680 = CIRCLE('',#502681,8.749946518209E-02); +#502681 = AXIS2_PLACEMENT_3D('',#502682,#502683,#502684); +#502682 = CARTESIAN_POINT('',(142.68750053482,-76.97499946518,-5.E-02)); +#502683 = DIRECTION('',(0.,0.,1.)); +#502684 = DIRECTION('',(0.999999999981,-6.112260610094E-06,0.)); +#502685 = ORIENTED_EDGE('',*,*,#502686,.T.); +#502686 = EDGE_CURVE('',#502678,#502687,#502689,.T.); +#502687 = VERTEX_POINT('',#502688); +#502688 = CARTESIAN_POINT('',(142.2375,-76.8875,-5.E-02)); +#502689 = LINE('',#502690,#502691); +#502690 = CARTESIAN_POINT('',(142.6875,-76.8875,-5.E-02)); +#502691 = VECTOR('',#502692,1.); +#502692 = DIRECTION('',(-1.,0.,0.)); +#502693 = ORIENTED_EDGE('',*,*,#502694,.T.); +#502694 = EDGE_CURVE('',#502687,#502695,#502697,.T.); +#502695 = VERTEX_POINT('',#502696); +#502696 = CARTESIAN_POINT('',(142.15,-76.975,-5.E-02)); +#502697 = CIRCLE('',#502698,8.749946518206E-02); +#502698 = AXIS2_PLACEMENT_3D('',#502699,#502700,#502701); +#502699 = CARTESIAN_POINT('',(142.23749946518,-76.97499946518,-5.E-02)); +#502700 = DIRECTION('',(0.,0.,1.)); +#502701 = DIRECTION('',(6.112261097329E-06,0.999999999981,-0.)); +#502702 = ORIENTED_EDGE('',*,*,#502703,.T.); +#502703 = EDGE_CURVE('',#502695,#502704,#502706,.T.); +#502704 = VERTEX_POINT('',#502705); +#502705 = CARTESIAN_POINT('',(142.15,-77.15,-5.E-02)); +#502706 = LINE('',#502707,#502708); +#502707 = CARTESIAN_POINT('',(142.15,-76.975,-5.E-02)); +#502708 = VECTOR('',#502709,1.); +#502709 = DIRECTION('',(0.,-1.,0.)); +#502710 = ORIENTED_EDGE('',*,*,#502711,.T.); +#502711 = EDGE_CURVE('',#502704,#502712,#502714,.T.); +#502712 = VERTEX_POINT('',#502713); +#502713 = CARTESIAN_POINT('',(142.2375,-77.2375,-5.E-02)); +#502714 = CIRCLE('',#502715,8.749946518206E-02); +#502715 = AXIS2_PLACEMENT_3D('',#502716,#502717,#502718); +#502716 = CARTESIAN_POINT('',(142.23749946518,-77.15000053482,-5.E-02)); +#502717 = DIRECTION('',(0.,0.,1.)); +#502718 = DIRECTION('',(-0.999999999981,6.112261097328E-06,0.)); +#502719 = ORIENTED_EDGE('',*,*,#502720,.T.); +#502720 = EDGE_CURVE('',#502712,#502721,#502723,.T.); +#502721 = VERTEX_POINT('',#502722); +#502722 = CARTESIAN_POINT('',(142.6875,-77.2375,-5.E-02)); +#502723 = LINE('',#502724,#502725); +#502724 = CARTESIAN_POINT('',(142.2375,-77.2375,-5.E-02)); +#502725 = VECTOR('',#502726,1.); +#502726 = DIRECTION('',(1.,0.,0.)); +#502727 = ORIENTED_EDGE('',*,*,#502728,.T.); +#502728 = EDGE_CURVE('',#502721,#502729,#502731,.T.); +#502729 = VERTEX_POINT('',#502730); +#502730 = CARTESIAN_POINT('',(142.775,-77.15,-5.E-02)); +#502731 = CIRCLE('',#502732,8.749946518209E-02); +#502732 = AXIS2_PLACEMENT_3D('',#502733,#502734,#502735); +#502733 = CARTESIAN_POINT('',(142.68750053482,-77.15000053482,-5.E-02)); +#502734 = DIRECTION('',(0.,0.,1.)); +#502735 = DIRECTION('',(-6.112260772505E-06,-0.999999999981,0.)); +#502736 = ORIENTED_EDGE('',*,*,#502737,.T.); +#502737 = EDGE_CURVE('',#502729,#502676,#502738,.T.); +#502738 = LINE('',#502739,#502740); +#502739 = CARTESIAN_POINT('',(142.775,-77.15,-5.E-02)); +#502740 = VECTOR('',#502741,1.); +#502741 = DIRECTION('',(0.,1.,0.)); +#502742 = FACE_BOUND('',#502743,.T.); +#502743 = EDGE_LOOP('',(#502744,#502755,#502763,#502772,#502780,#502789, + #502797,#502806)); +#502744 = ORIENTED_EDGE('',*,*,#502745,.T.); +#502745 = EDGE_CURVE('',#502746,#502748,#502750,.T.); +#502746 = VERTEX_POINT('',#502747); +#502747 = CARTESIAN_POINT('',(139.11,-76.555,-5.E-02)); +#502748 = VERTEX_POINT('',#502749); +#502749 = CARTESIAN_POINT('',(138.97,-76.415,-5.E-02)); +#502750 = CIRCLE('',#502751,0.139999827125); +#502751 = AXIS2_PLACEMENT_3D('',#502752,#502753,#502754); +#502752 = CARTESIAN_POINT('',(138.97000017287,-76.55499982712,-5.E-02)); +#502753 = DIRECTION('',(0.,0.,1.)); +#502754 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#502755 = ORIENTED_EDGE('',*,*,#502756,.T.); +#502756 = EDGE_CURVE('',#502748,#502757,#502759,.T.); +#502757 = VERTEX_POINT('',#502758); +#502758 = CARTESIAN_POINT('',(138.63,-76.415,-5.E-02)); +#502759 = LINE('',#502760,#502761); +#502760 = CARTESIAN_POINT('',(138.97,-76.415,-5.E-02)); +#502761 = VECTOR('',#502762,1.); +#502762 = DIRECTION('',(-1.,0.,0.)); +#502763 = ORIENTED_EDGE('',*,*,#502764,.T.); +#502764 = EDGE_CURVE('',#502757,#502765,#502767,.T.); +#502765 = VERTEX_POINT('',#502766); +#502766 = CARTESIAN_POINT('',(138.49,-76.555,-5.E-02)); +#502767 = CIRCLE('',#502768,0.139999827125); +#502768 = AXIS2_PLACEMENT_3D('',#502769,#502770,#502771); +#502769 = CARTESIAN_POINT('',(138.62999982712,-76.55499982712,-5.E-02)); +#502770 = DIRECTION('',(0.,0.,1.)); +#502771 = DIRECTION('',(1.234820451254E-06,0.999999999999,-0.)); +#502772 = ORIENTED_EDGE('',*,*,#502773,.T.); +#502773 = EDGE_CURVE('',#502765,#502774,#502776,.T.); +#502774 = VERTEX_POINT('',#502775); +#502775 = CARTESIAN_POINT('',(138.49,-76.835,-5.E-02)); +#502776 = LINE('',#502777,#502778); +#502777 = CARTESIAN_POINT('',(138.49,-76.555,-5.E-02)); +#502778 = VECTOR('',#502779,1.); +#502779 = DIRECTION('',(0.,-1.,0.)); +#502780 = ORIENTED_EDGE('',*,*,#502781,.T.); +#502781 = EDGE_CURVE('',#502774,#502782,#502784,.T.); +#502782 = VERTEX_POINT('',#502783); +#502783 = CARTESIAN_POINT('',(138.63,-76.975,-5.E-02)); +#502784 = CIRCLE('',#502785,0.139999827125); +#502785 = AXIS2_PLACEMENT_3D('',#502786,#502787,#502788); +#502786 = CARTESIAN_POINT('',(138.62999982712,-76.83500017287,-5.E-02)); +#502787 = DIRECTION('',(0.,0.,1.)); +#502788 = DIRECTION('',(-0.999999999999,1.23482055276E-06,0.)); +#502789 = ORIENTED_EDGE('',*,*,#502790,.T.); +#502790 = EDGE_CURVE('',#502782,#502791,#502793,.T.); +#502791 = VERTEX_POINT('',#502792); +#502792 = CARTESIAN_POINT('',(138.97,-76.975,-5.E-02)); +#502793 = LINE('',#502794,#502795); +#502794 = CARTESIAN_POINT('',(138.63,-76.975,-5.E-02)); +#502795 = VECTOR('',#502796,1.); +#502796 = DIRECTION('',(1.,0.,0.)); +#502797 = ORIENTED_EDGE('',*,*,#502798,.T.); +#502798 = EDGE_CURVE('',#502791,#502799,#502801,.T.); +#502799 = VERTEX_POINT('',#502800); +#502800 = CARTESIAN_POINT('',(139.11,-76.835,-5.E-02)); +#502801 = CIRCLE('',#502802,0.139999827125); +#502802 = AXIS2_PLACEMENT_3D('',#502803,#502804,#502805); +#502803 = CARTESIAN_POINT('',(138.97000017287,-76.83500017287,-5.E-02)); +#502804 = DIRECTION('',(0.,0.,1.)); +#502805 = DIRECTION('',(-1.234820248241E-06,-0.999999999999,0.)); +#502806 = ORIENTED_EDGE('',*,*,#502807,.T.); +#502807 = EDGE_CURVE('',#502799,#502746,#502808,.T.); +#502808 = LINE('',#502809,#502810); +#502809 = CARTESIAN_POINT('',(139.11,-76.835,-5.E-02)); +#502810 = VECTOR('',#502811,1.); +#502811 = DIRECTION('',(0.,1.,0.)); +#502812 = FACE_BOUND('',#502813,.T.); +#502813 = EDGE_LOOP('',(#502814,#502825,#502833,#502842,#502850,#502859, + #502867,#502876)); +#502814 = ORIENTED_EDGE('',*,*,#502815,.T.); +#502815 = EDGE_CURVE('',#502816,#502818,#502820,.T.); +#502816 = VERTEX_POINT('',#502817); +#502817 = CARTESIAN_POINT('',(137.875,-76.175,-5.E-02)); +#502818 = VERTEX_POINT('',#502819); +#502819 = CARTESIAN_POINT('',(137.65,-75.95,-5.E-02)); +#502820 = CIRCLE('',#502821,0.225000087974); +#502821 = AXIS2_PLACEMENT_3D('',#502822,#502823,#502824); +#502822 = CARTESIAN_POINT('',(137.64999991202,-76.17500008797,-5.E-02)); +#502823 = DIRECTION('',(0.,0.,1.)); +#502824 = DIRECTION('',(1.,3.909952826573E-07,-0.)); +#502825 = ORIENTED_EDGE('',*,*,#502826,.T.); +#502826 = EDGE_CURVE('',#502818,#502827,#502829,.T.); +#502827 = VERTEX_POINT('',#502828); +#502828 = CARTESIAN_POINT('',(137.15,-75.95,-5.E-02)); +#502829 = LINE('',#502830,#502831); +#502830 = CARTESIAN_POINT('',(137.65,-75.95,-5.E-02)); +#502831 = VECTOR('',#502832,1.); +#502832 = DIRECTION('',(-1.,0.,0.)); +#502833 = ORIENTED_EDGE('',*,*,#502834,.T.); +#502834 = EDGE_CURVE('',#502827,#502835,#502837,.T.); +#502835 = VERTEX_POINT('',#502836); +#502836 = CARTESIAN_POINT('',(136.925,-76.175,-5.E-02)); +#502837 = CIRCLE('',#502838,0.225000087974); +#502838 = AXIS2_PLACEMENT_3D('',#502839,#502840,#502841); +#502839 = CARTESIAN_POINT('',(137.15000008797,-76.17500008797,-5.E-02)); +#502840 = DIRECTION('',(0.,0.,1.)); +#502841 = DIRECTION('',(-3.909952826573E-07,1.,0.)); +#502842 = ORIENTED_EDGE('',*,*,#502843,.T.); +#502843 = EDGE_CURVE('',#502835,#502844,#502846,.T.); +#502844 = VERTEX_POINT('',#502845); +#502845 = CARTESIAN_POINT('',(136.925,-76.625,-5.E-02)); +#502846 = LINE('',#502847,#502848); +#502847 = CARTESIAN_POINT('',(136.925,-76.175,-5.E-02)); +#502848 = VECTOR('',#502849,1.); +#502849 = DIRECTION('',(0.,-1.,0.)); +#502850 = ORIENTED_EDGE('',*,*,#502851,.T.); +#502851 = EDGE_CURVE('',#502844,#502852,#502854,.T.); +#502852 = VERTEX_POINT('',#502853); +#502853 = CARTESIAN_POINT('',(137.15,-76.85,-5.E-02)); +#502854 = CIRCLE('',#502855,0.225000087974); +#502855 = AXIS2_PLACEMENT_3D('',#502856,#502857,#502858); +#502856 = CARTESIAN_POINT('',(137.15000008797,-76.62499991202,-5.E-02)); +#502857 = DIRECTION('',(0.,0.,1.)); +#502858 = DIRECTION('',(-1.,-3.909952826573E-07,0.)); +#502859 = ORIENTED_EDGE('',*,*,#502860,.T.); +#502860 = EDGE_CURVE('',#502852,#502861,#502863,.T.); +#502861 = VERTEX_POINT('',#502862); +#502862 = CARTESIAN_POINT('',(137.65,-76.85,-5.E-02)); +#502863 = LINE('',#502864,#502865); +#502864 = CARTESIAN_POINT('',(137.15,-76.85,-5.E-02)); +#502865 = VECTOR('',#502866,1.); +#502866 = DIRECTION('',(1.,0.,0.)); +#502867 = ORIENTED_EDGE('',*,*,#502868,.T.); +#502868 = EDGE_CURVE('',#502861,#502869,#502871,.T.); +#502869 = VERTEX_POINT('',#502870); +#502870 = CARTESIAN_POINT('',(137.875,-76.625,-5.E-02)); +#502871 = CIRCLE('',#502872,0.225000087974); +#502872 = AXIS2_PLACEMENT_3D('',#502873,#502874,#502875); +#502873 = CARTESIAN_POINT('',(137.64999991202,-76.62499991202,-5.E-02)); +#502874 = DIRECTION('',(0.,0.,1.)); +#502875 = DIRECTION('',(3.909952826573E-07,-1.,0.)); +#502876 = ORIENTED_EDGE('',*,*,#502877,.T.); +#502877 = EDGE_CURVE('',#502869,#502816,#502878,.T.); +#502878 = LINE('',#502879,#502880); +#502879 = CARTESIAN_POINT('',(137.875,-76.625,-5.E-02)); +#502880 = VECTOR('',#502881,1.); +#502881 = DIRECTION('',(0.,1.,0.)); +#502882 = FACE_BOUND('',#502883,.T.); +#502883 = EDGE_LOOP('',(#502884,#502895,#502903,#502912,#502920,#502929, + #502937,#502946)); +#502884 = ORIENTED_EDGE('',*,*,#502885,.T.); +#502885 = EDGE_CURVE('',#502886,#502888,#502890,.T.); +#502886 = VERTEX_POINT('',#502887); +#502887 = CARTESIAN_POINT('',(140.45,-76.475,-5.E-02)); +#502888 = VERTEX_POINT('',#502889); +#502889 = CARTESIAN_POINT('',(140.3625,-76.3875,-5.E-02)); +#502890 = CIRCLE('',#502891,8.749946518204E-02); +#502891 = AXIS2_PLACEMENT_3D('',#502892,#502893,#502894); +#502892 = CARTESIAN_POINT('',(140.36250053482,-76.47499946518,-5.E-02)); +#502893 = DIRECTION('',(0.,0.,1.)); +#502894 = DIRECTION('',(0.999999999981,-6.11226109733E-06,0.)); +#502895 = ORIENTED_EDGE('',*,*,#502896,.T.); +#502896 = EDGE_CURVE('',#502888,#502897,#502899,.T.); +#502897 = VERTEX_POINT('',#502898); +#502898 = CARTESIAN_POINT('',(139.9125,-76.3875,-5.E-02)); +#502899 = LINE('',#502900,#502901); +#502900 = CARTESIAN_POINT('',(140.3625,-76.3875,-5.E-02)); +#502901 = VECTOR('',#502902,1.); +#502902 = DIRECTION('',(-1.,0.,0.)); +#502903 = ORIENTED_EDGE('',*,*,#502904,.T.); +#502904 = EDGE_CURVE('',#502897,#502905,#502907,.T.); +#502905 = VERTEX_POINT('',#502906); +#502906 = CARTESIAN_POINT('',(139.825,-76.475,-5.E-02)); +#502907 = CIRCLE('',#502908,8.74994651821E-02); +#502908 = AXIS2_PLACEMENT_3D('',#502909,#502910,#502911); +#502909 = CARTESIAN_POINT('',(139.91249946518,-76.47499946518,-5.E-02)); +#502910 = DIRECTION('',(0.,0.,1.)); +#502911 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#502912 = ORIENTED_EDGE('',*,*,#502913,.T.); +#502913 = EDGE_CURVE('',#502905,#502914,#502916,.T.); +#502914 = VERTEX_POINT('',#502915); +#502915 = CARTESIAN_POINT('',(139.825,-76.65,-5.E-02)); +#502916 = LINE('',#502917,#502918); +#502917 = CARTESIAN_POINT('',(139.825,-76.475,-5.E-02)); +#502918 = VECTOR('',#502919,1.); +#502919 = DIRECTION('',(0.,-1.,0.)); +#502920 = ORIENTED_EDGE('',*,*,#502921,.T.); +#502921 = EDGE_CURVE('',#502914,#502922,#502924,.T.); +#502922 = VERTEX_POINT('',#502923); +#502923 = CARTESIAN_POINT('',(139.9125,-76.7375,-5.E-02)); +#502924 = CIRCLE('',#502925,8.74994651821E-02); +#502925 = AXIS2_PLACEMENT_3D('',#502926,#502927,#502928); +#502926 = CARTESIAN_POINT('',(139.91249946518,-76.65000053482,-5.E-02)); +#502927 = DIRECTION('',(0.,0.,1.)); +#502928 = DIRECTION('',(-0.999999999981,6.112260447683E-06,0.)); +#502929 = ORIENTED_EDGE('',*,*,#502930,.T.); +#502930 = EDGE_CURVE('',#502922,#502931,#502933,.T.); +#502931 = VERTEX_POINT('',#502932); +#502932 = CARTESIAN_POINT('',(140.3625,-76.7375,-5.E-02)); +#502933 = LINE('',#502934,#502935); +#502934 = CARTESIAN_POINT('',(139.9125,-76.7375,-5.E-02)); +#502935 = VECTOR('',#502936,1.); +#502936 = DIRECTION('',(1.,0.,0.)); +#502937 = ORIENTED_EDGE('',*,*,#502938,.T.); +#502938 = EDGE_CURVE('',#502931,#502939,#502941,.T.); +#502939 = VERTEX_POINT('',#502940); +#502940 = CARTESIAN_POINT('',(140.45,-76.65,-5.E-02)); +#502941 = CIRCLE('',#502942,8.749946518204E-02); +#502942 = AXIS2_PLACEMENT_3D('',#502943,#502944,#502945); +#502943 = CARTESIAN_POINT('',(140.36250053482,-76.65000053482,-5.E-02)); +#502944 = DIRECTION('',(0.,0.,1.)); +#502945 = DIRECTION('',(-6.112261097329E-06,-0.999999999981,0.)); +#502946 = ORIENTED_EDGE('',*,*,#502947,.T.); +#502947 = EDGE_CURVE('',#502939,#502886,#502948,.T.); +#502948 = LINE('',#502949,#502950); +#502949 = CARTESIAN_POINT('',(140.45,-76.65,-5.E-02)); +#502950 = VECTOR('',#502951,1.); +#502951 = DIRECTION('',(0.,1.,0.)); +#502952 = FACE_BOUND('',#502953,.T.); +#502953 = EDGE_LOOP('',(#502954,#502965,#502973,#502982,#502990,#502999, + #503007,#503016)); +#502954 = ORIENTED_EDGE('',*,*,#502955,.T.); +#502955 = EDGE_CURVE('',#502956,#502958,#502960,.T.); +#502956 = VERTEX_POINT('',#502957); +#502957 = CARTESIAN_POINT('',(142.775,-76.475,-5.E-02)); +#502958 = VERTEX_POINT('',#502959); +#502959 = CARTESIAN_POINT('',(142.6875,-76.3875,-5.E-02)); +#502960 = CIRCLE('',#502961,8.749946518209E-02); +#502961 = AXIS2_PLACEMENT_3D('',#502962,#502963,#502964); +#502962 = CARTESIAN_POINT('',(142.68750053482,-76.47499946518,-5.E-02)); +#502963 = DIRECTION('',(0.,0.,1.)); +#502964 = DIRECTION('',(0.999999999981,-6.112260610094E-06,0.)); +#502965 = ORIENTED_EDGE('',*,*,#502966,.T.); +#502966 = EDGE_CURVE('',#502958,#502967,#502969,.T.); +#502967 = VERTEX_POINT('',#502968); +#502968 = CARTESIAN_POINT('',(142.2375,-76.3875,-5.E-02)); +#502969 = LINE('',#502970,#502971); +#502970 = CARTESIAN_POINT('',(142.6875,-76.3875,-5.E-02)); +#502971 = VECTOR('',#502972,1.); +#502972 = DIRECTION('',(-1.,0.,0.)); +#502973 = ORIENTED_EDGE('',*,*,#502974,.T.); +#502974 = EDGE_CURVE('',#502967,#502975,#502977,.T.); +#502975 = VERTEX_POINT('',#502976); +#502976 = CARTESIAN_POINT('',(142.15,-76.475,-5.E-02)); +#502977 = CIRCLE('',#502978,8.749946518206E-02); +#502978 = AXIS2_PLACEMENT_3D('',#502979,#502980,#502981); +#502979 = CARTESIAN_POINT('',(142.23749946518,-76.47499946518,-5.E-02)); +#502980 = DIRECTION('',(0.,0.,1.)); +#502981 = DIRECTION('',(6.112261097329E-06,0.999999999981,-0.)); +#502982 = ORIENTED_EDGE('',*,*,#502983,.T.); +#502983 = EDGE_CURVE('',#502975,#502984,#502986,.T.); +#502984 = VERTEX_POINT('',#502985); +#502985 = CARTESIAN_POINT('',(142.15,-76.65,-5.E-02)); +#502986 = LINE('',#502987,#502988); +#502987 = CARTESIAN_POINT('',(142.15,-76.475,-5.E-02)); +#502988 = VECTOR('',#502989,1.); +#502989 = DIRECTION('',(0.,-1.,0.)); +#502990 = ORIENTED_EDGE('',*,*,#502991,.T.); +#502991 = EDGE_CURVE('',#502984,#502992,#502994,.T.); +#502992 = VERTEX_POINT('',#502993); +#502993 = CARTESIAN_POINT('',(142.2375,-76.7375,-5.E-02)); +#502994 = CIRCLE('',#502995,8.749946518206E-02); +#502995 = AXIS2_PLACEMENT_3D('',#502996,#502997,#502998); +#502996 = CARTESIAN_POINT('',(142.23749946518,-76.65000053482,-5.E-02)); +#502997 = DIRECTION('',(0.,0.,1.)); +#502998 = DIRECTION('',(-0.999999999981,6.112261097328E-06,0.)); +#502999 = ORIENTED_EDGE('',*,*,#503000,.T.); +#503000 = EDGE_CURVE('',#502992,#503001,#503003,.T.); +#503001 = VERTEX_POINT('',#503002); +#503002 = CARTESIAN_POINT('',(142.6875,-76.7375,-5.E-02)); +#503003 = LINE('',#503004,#503005); +#503004 = CARTESIAN_POINT('',(142.2375,-76.7375,-5.E-02)); +#503005 = VECTOR('',#503006,1.); +#503006 = DIRECTION('',(1.,0.,0.)); +#503007 = ORIENTED_EDGE('',*,*,#503008,.T.); +#503008 = EDGE_CURVE('',#503001,#503009,#503011,.T.); +#503009 = VERTEX_POINT('',#503010); +#503010 = CARTESIAN_POINT('',(142.775,-76.65,-5.E-02)); +#503011 = CIRCLE('',#503012,8.749946518209E-02); +#503012 = AXIS2_PLACEMENT_3D('',#503013,#503014,#503015); +#503013 = CARTESIAN_POINT('',(142.68750053482,-76.65000053482,-5.E-02)); +#503014 = DIRECTION('',(0.,0.,1.)); +#503015 = DIRECTION('',(-6.112260772505E-06,-0.999999999981,0.)); +#503016 = ORIENTED_EDGE('',*,*,#503017,.T.); +#503017 = EDGE_CURVE('',#503009,#502956,#503018,.T.); +#503018 = LINE('',#503019,#503020); +#503019 = CARTESIAN_POINT('',(142.775,-76.65,-5.E-02)); +#503020 = VECTOR('',#503021,1.); +#503021 = DIRECTION('',(0.,1.,0.)); +#503022 = FACE_BOUND('',#503023,.T.); +#503023 = EDGE_LOOP('',(#503024,#503035,#503043,#503052,#503060,#503069, + #503077,#503086)); +#503024 = ORIENTED_EDGE('',*,*,#503025,.T.); +#503025 = EDGE_CURVE('',#503026,#503028,#503030,.T.); +#503026 = VERTEX_POINT('',#503027); +#503027 = CARTESIAN_POINT('',(140.975,-76.175,-5.E-02)); +#503028 = VERTEX_POINT('',#503029); +#503029 = CARTESIAN_POINT('',(140.8875,-76.0875,-5.E-02)); +#503030 = CIRCLE('',#503031,8.749946518206E-02); +#503031 = AXIS2_PLACEMENT_3D('',#503032,#503033,#503034); +#503032 = CARTESIAN_POINT('',(140.88750053482,-76.17499946518,-5.E-02)); +#503033 = DIRECTION('',(0.,0.,1.)); +#503034 = DIRECTION('',(0.999999999981,-6.112261097328E-06,0.)); +#503035 = ORIENTED_EDGE('',*,*,#503036,.T.); +#503036 = EDGE_CURVE('',#503028,#503037,#503039,.T.); +#503037 = VERTEX_POINT('',#503038); +#503038 = CARTESIAN_POINT('',(140.7125,-76.0875,-5.E-02)); +#503039 = LINE('',#503040,#503041); +#503040 = CARTESIAN_POINT('',(140.8875,-76.0875,-5.E-02)); +#503041 = VECTOR('',#503042,1.); +#503042 = DIRECTION('',(-1.,0.,0.)); +#503043 = ORIENTED_EDGE('',*,*,#503044,.T.); +#503044 = EDGE_CURVE('',#503037,#503045,#503047,.T.); +#503045 = VERTEX_POINT('',#503046); +#503046 = CARTESIAN_POINT('',(140.625,-76.175,-5.E-02)); +#503047 = CIRCLE('',#503048,8.74994651821E-02); +#503048 = AXIS2_PLACEMENT_3D('',#503049,#503050,#503051); +#503049 = CARTESIAN_POINT('',(140.71249946518,-76.17499946518,-5.E-02)); +#503050 = DIRECTION('',(0.,0.,1.)); +#503051 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#503052 = ORIENTED_EDGE('',*,*,#503053,.T.); +#503053 = EDGE_CURVE('',#503045,#503054,#503056,.T.); +#503054 = VERTEX_POINT('',#503055); +#503055 = CARTESIAN_POINT('',(140.625,-76.625,-5.E-02)); +#503056 = LINE('',#503057,#503058); +#503057 = CARTESIAN_POINT('',(140.625,-76.175,-5.E-02)); +#503058 = VECTOR('',#503059,1.); +#503059 = DIRECTION('',(0.,-1.,0.)); +#503060 = ORIENTED_EDGE('',*,*,#503061,.T.); +#503061 = EDGE_CURVE('',#503054,#503062,#503064,.T.); +#503062 = VERTEX_POINT('',#503063); +#503063 = CARTESIAN_POINT('',(140.7125,-76.7125,-5.E-02)); +#503064 = CIRCLE('',#503065,8.749946518212E-02); +#503065 = AXIS2_PLACEMENT_3D('',#503066,#503067,#503068); +#503066 = CARTESIAN_POINT('',(140.71249946518,-76.62500053482,-5.E-02)); +#503067 = DIRECTION('',(0.,0.,1.)); +#503068 = DIRECTION('',(-0.999999999981,6.112260447681E-06,0.)); +#503069 = ORIENTED_EDGE('',*,*,#503070,.T.); +#503070 = EDGE_CURVE('',#503062,#503071,#503073,.T.); +#503071 = VERTEX_POINT('',#503072); +#503072 = CARTESIAN_POINT('',(140.8875,-76.7125,-5.E-02)); +#503073 = LINE('',#503074,#503075); +#503074 = CARTESIAN_POINT('',(140.7125,-76.7125,-5.E-02)); +#503075 = VECTOR('',#503076,1.); +#503076 = DIRECTION('',(1.,0.,0.)); +#503077 = ORIENTED_EDGE('',*,*,#503078,.T.); +#503078 = EDGE_CURVE('',#503071,#503079,#503081,.T.); +#503079 = VERTEX_POINT('',#503080); +#503080 = CARTESIAN_POINT('',(140.975,-76.625,-5.E-02)); +#503081 = CIRCLE('',#503082,8.749946518209E-02); +#503082 = AXIS2_PLACEMENT_3D('',#503083,#503084,#503085); +#503083 = CARTESIAN_POINT('',(140.88750053482,-76.62500053482,-5.E-02)); +#503084 = DIRECTION('',(0.,0.,1.)); +#503085 = DIRECTION('',(-6.112260772506E-06,-0.999999999981,0.)); +#503086 = ORIENTED_EDGE('',*,*,#503087,.T.); +#503087 = EDGE_CURVE('',#503079,#503026,#503088,.T.); +#503088 = LINE('',#503089,#503090); +#503089 = CARTESIAN_POINT('',(140.975,-76.625,-5.E-02)); +#503090 = VECTOR('',#503091,1.); +#503091 = DIRECTION('',(0.,1.,0.)); +#503092 = FACE_BOUND('',#503093,.T.); +#503093 = EDGE_LOOP('',(#503094,#503105,#503113,#503122,#503130,#503139, + #503147,#503156)); +#503094 = ORIENTED_EDGE('',*,*,#503095,.T.); +#503095 = EDGE_CURVE('',#503096,#503098,#503100,.T.); +#503096 = VERTEX_POINT('',#503097); +#503097 = CARTESIAN_POINT('',(141.475,-76.175,-5.E-02)); +#503098 = VERTEX_POINT('',#503099); +#503099 = CARTESIAN_POINT('',(141.3875,-76.0875,-5.E-02)); +#503100 = CIRCLE('',#503101,8.749946518206E-02); +#503101 = AXIS2_PLACEMENT_3D('',#503102,#503103,#503104); +#503102 = CARTESIAN_POINT('',(141.38750053482,-76.17499946518,-5.E-02)); +#503103 = DIRECTION('',(0.,0.,1.)); +#503104 = DIRECTION('',(0.999999999981,-6.112261097328E-06,0.)); +#503105 = ORIENTED_EDGE('',*,*,#503106,.T.); +#503106 = EDGE_CURVE('',#503098,#503107,#503109,.T.); +#503107 = VERTEX_POINT('',#503108); +#503108 = CARTESIAN_POINT('',(141.2125,-76.0875,-5.E-02)); +#503109 = LINE('',#503110,#503111); +#503110 = CARTESIAN_POINT('',(141.3875,-76.0875,-5.E-02)); +#503111 = VECTOR('',#503112,1.); +#503112 = DIRECTION('',(-1.,0.,0.)); +#503113 = ORIENTED_EDGE('',*,*,#503114,.T.); +#503114 = EDGE_CURVE('',#503107,#503115,#503117,.T.); +#503115 = VERTEX_POINT('',#503116); +#503116 = CARTESIAN_POINT('',(141.125,-76.175,-5.E-02)); +#503117 = CIRCLE('',#503118,8.74994651821E-02); +#503118 = AXIS2_PLACEMENT_3D('',#503119,#503120,#503121); +#503119 = CARTESIAN_POINT('',(141.21249946518,-76.17499946518,-5.E-02)); +#503120 = DIRECTION('',(0.,0.,1.)); +#503121 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#503122 = ORIENTED_EDGE('',*,*,#503123,.T.); +#503123 = EDGE_CURVE('',#503115,#503124,#503126,.T.); +#503124 = VERTEX_POINT('',#503125); +#503125 = CARTESIAN_POINT('',(141.125,-76.625,-5.E-02)); +#503126 = LINE('',#503127,#503128); +#503127 = CARTESIAN_POINT('',(141.125,-76.175,-5.E-02)); +#503128 = VECTOR('',#503129,1.); +#503129 = DIRECTION('',(0.,-1.,0.)); +#503130 = ORIENTED_EDGE('',*,*,#503131,.T.); +#503131 = EDGE_CURVE('',#503124,#503132,#503134,.T.); +#503132 = VERTEX_POINT('',#503133); +#503133 = CARTESIAN_POINT('',(141.2125,-76.7125,-5.E-02)); +#503134 = CIRCLE('',#503135,8.749946518212E-02); +#503135 = AXIS2_PLACEMENT_3D('',#503136,#503137,#503138); +#503136 = CARTESIAN_POINT('',(141.21249946518,-76.62500053482,-5.E-02)); +#503137 = DIRECTION('',(0.,0.,1.)); +#503138 = DIRECTION('',(-0.999999999981,6.112260447681E-06,0.)); +#503139 = ORIENTED_EDGE('',*,*,#503140,.T.); +#503140 = EDGE_CURVE('',#503132,#503141,#503143,.T.); +#503141 = VERTEX_POINT('',#503142); +#503142 = CARTESIAN_POINT('',(141.3875,-76.7125,-5.E-02)); +#503143 = LINE('',#503144,#503145); +#503144 = CARTESIAN_POINT('',(141.2125,-76.7125,-5.E-02)); +#503145 = VECTOR('',#503146,1.); +#503146 = DIRECTION('',(1.,0.,0.)); +#503147 = ORIENTED_EDGE('',*,*,#503148,.T.); +#503148 = EDGE_CURVE('',#503141,#503149,#503151,.T.); +#503149 = VERTEX_POINT('',#503150); +#503150 = CARTESIAN_POINT('',(141.475,-76.625,-5.E-02)); +#503151 = CIRCLE('',#503152,8.749946518209E-02); +#503152 = AXIS2_PLACEMENT_3D('',#503153,#503154,#503155); +#503153 = CARTESIAN_POINT('',(141.38750053482,-76.62500053482,-5.E-02)); +#503154 = DIRECTION('',(0.,0.,1.)); +#503155 = DIRECTION('',(-6.112260772506E-06,-0.999999999981,0.)); +#503156 = ORIENTED_EDGE('',*,*,#503157,.T.); +#503157 = EDGE_CURVE('',#503149,#503096,#503158,.T.); +#503158 = LINE('',#503159,#503160); +#503159 = CARTESIAN_POINT('',(141.475,-76.625,-5.E-02)); +#503160 = VECTOR('',#503161,1.); +#503161 = DIRECTION('',(0.,1.,0.)); +#503162 = FACE_BOUND('',#503163,.T.); +#503163 = EDGE_LOOP('',(#503164,#503175,#503183,#503192,#503200,#503209, + #503217,#503226)); +#503164 = ORIENTED_EDGE('',*,*,#503165,.T.); +#503165 = EDGE_CURVE('',#503166,#503168,#503170,.T.); +#503166 = VERTEX_POINT('',#503167); +#503167 = CARTESIAN_POINT('',(141.975,-76.175,-5.E-02)); +#503168 = VERTEX_POINT('',#503169); +#503169 = CARTESIAN_POINT('',(141.8875,-76.0875,-5.E-02)); +#503170 = CIRCLE('',#503171,8.749946518206E-02); +#503171 = AXIS2_PLACEMENT_3D('',#503172,#503173,#503174); +#503172 = CARTESIAN_POINT('',(141.88750053482,-76.17499946518,-5.E-02)); +#503173 = DIRECTION('',(0.,0.,1.)); +#503174 = DIRECTION('',(0.999999999981,-6.112261097328E-06,0.)); +#503175 = ORIENTED_EDGE('',*,*,#503176,.T.); +#503176 = EDGE_CURVE('',#503168,#503177,#503179,.T.); +#503177 = VERTEX_POINT('',#503178); +#503178 = CARTESIAN_POINT('',(141.7125,-76.0875,-5.E-02)); +#503179 = LINE('',#503180,#503181); +#503180 = CARTESIAN_POINT('',(141.8875,-76.0875,-5.E-02)); +#503181 = VECTOR('',#503182,1.); +#503182 = DIRECTION('',(-1.,0.,0.)); +#503183 = ORIENTED_EDGE('',*,*,#503184,.T.); +#503184 = EDGE_CURVE('',#503177,#503185,#503187,.T.); +#503185 = VERTEX_POINT('',#503186); +#503186 = CARTESIAN_POINT('',(141.625,-76.175,-5.E-02)); +#503187 = CIRCLE('',#503188,8.74994651821E-02); +#503188 = AXIS2_PLACEMENT_3D('',#503189,#503190,#503191); +#503189 = CARTESIAN_POINT('',(141.71249946518,-76.17499946518,-5.E-02)); +#503190 = DIRECTION('',(0.,0.,1.)); +#503191 = DIRECTION('',(6.112260772504E-06,0.999999999981,-0.)); +#503192 = ORIENTED_EDGE('',*,*,#503193,.T.); +#503193 = EDGE_CURVE('',#503185,#503194,#503196,.T.); +#503194 = VERTEX_POINT('',#503195); +#503195 = CARTESIAN_POINT('',(141.625,-76.625,-5.E-02)); +#503196 = LINE('',#503197,#503198); +#503197 = CARTESIAN_POINT('',(141.625,-76.175,-5.E-02)); +#503198 = VECTOR('',#503199,1.); +#503199 = DIRECTION('',(0.,-1.,0.)); +#503200 = ORIENTED_EDGE('',*,*,#503201,.T.); +#503201 = EDGE_CURVE('',#503194,#503202,#503204,.T.); +#503202 = VERTEX_POINT('',#503203); +#503203 = CARTESIAN_POINT('',(141.7125,-76.7125,-5.E-02)); +#503204 = CIRCLE('',#503205,8.749946518212E-02); +#503205 = AXIS2_PLACEMENT_3D('',#503206,#503207,#503208); +#503206 = CARTESIAN_POINT('',(141.71249946518,-76.62500053482,-5.E-02)); +#503207 = DIRECTION('',(0.,0.,1.)); +#503208 = DIRECTION('',(-0.999999999981,6.112260447681E-06,0.)); +#503209 = ORIENTED_EDGE('',*,*,#503210,.T.); +#503210 = EDGE_CURVE('',#503202,#503211,#503213,.T.); +#503211 = VERTEX_POINT('',#503212); +#503212 = CARTESIAN_POINT('',(141.8875,-76.7125,-5.E-02)); +#503213 = LINE('',#503214,#503215); +#503214 = CARTESIAN_POINT('',(141.7125,-76.7125,-5.E-02)); +#503215 = VECTOR('',#503216,1.); +#503216 = DIRECTION('',(1.,0.,0.)); +#503217 = ORIENTED_EDGE('',*,*,#503218,.T.); +#503218 = EDGE_CURVE('',#503211,#503219,#503221,.T.); +#503219 = VERTEX_POINT('',#503220); +#503220 = CARTESIAN_POINT('',(141.975,-76.625,-5.E-02)); +#503221 = CIRCLE('',#503222,8.749946518209E-02); +#503222 = AXIS2_PLACEMENT_3D('',#503223,#503224,#503225); +#503223 = CARTESIAN_POINT('',(141.88750053482,-76.62500053482,-5.E-02)); +#503224 = DIRECTION('',(0.,0.,1.)); +#503225 = DIRECTION('',(-6.112260772506E-06,-0.999999999981,0.)); +#503226 = ORIENTED_EDGE('',*,*,#503227,.T.); +#503227 = EDGE_CURVE('',#503219,#503166,#503228,.T.); +#503228 = LINE('',#503229,#503230); +#503229 = CARTESIAN_POINT('',(141.975,-76.625,-5.E-02)); +#503230 = VECTOR('',#503231,1.); +#503231 = DIRECTION('',(0.,1.,0.)); +#503232 = FACE_BOUND('',#503233,.T.); +#503233 = EDGE_LOOP('',(#503234,#503245,#503253,#503262,#503270,#503279, + #503287,#503296)); +#503234 = ORIENTED_EDGE('',*,*,#503235,.T.); +#503235 = EDGE_CURVE('',#503236,#503238,#503240,.T.); +#503236 = VERTEX_POINT('',#503237); +#503237 = CARTESIAN_POINT('',(139.81,-73.34,-5.E-02)); +#503238 = VERTEX_POINT('',#503239); +#503239 = CARTESIAN_POINT('',(139.67,-73.2,-5.E-02)); +#503240 = CIRCLE('',#503241,0.139999827125); +#503241 = AXIS2_PLACEMENT_3D('',#503242,#503243,#503244); +#503242 = CARTESIAN_POINT('',(139.67000017287,-73.33999982712,-5.E-02)); +#503243 = DIRECTION('',(0.,0.,1.)); +#503244 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#503245 = ORIENTED_EDGE('',*,*,#503246,.T.); +#503246 = EDGE_CURVE('',#503238,#503247,#503249,.T.); +#503247 = VERTEX_POINT('',#503248); +#503248 = CARTESIAN_POINT('',(139.33,-73.2,-5.E-02)); +#503249 = LINE('',#503250,#503251); +#503250 = CARTESIAN_POINT('',(139.67,-73.2,-5.E-02)); +#503251 = VECTOR('',#503252,1.); +#503252 = DIRECTION('',(-1.,0.,0.)); +#503253 = ORIENTED_EDGE('',*,*,#503254,.T.); +#503254 = EDGE_CURVE('',#503247,#503255,#503257,.T.); +#503255 = VERTEX_POINT('',#503256); +#503256 = CARTESIAN_POINT('',(139.19,-73.34,-5.E-02)); +#503257 = CIRCLE('',#503258,0.139999827125); +#503258 = AXIS2_PLACEMENT_3D('',#503259,#503260,#503261); +#503259 = CARTESIAN_POINT('',(139.32999982712,-73.33999982712,-5.E-02)); +#503260 = DIRECTION('',(0.,0.,1.)); +#503261 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#503262 = ORIENTED_EDGE('',*,*,#503263,.T.); +#503263 = EDGE_CURVE('',#503255,#503264,#503266,.T.); +#503264 = VERTEX_POINT('',#503265); +#503265 = CARTESIAN_POINT('',(139.19,-73.62,-5.E-02)); +#503266 = LINE('',#503267,#503268); +#503267 = CARTESIAN_POINT('',(139.19,-73.34,-5.E-02)); +#503268 = VECTOR('',#503269,1.); +#503269 = DIRECTION('',(0.,-1.,0.)); +#503270 = ORIENTED_EDGE('',*,*,#503271,.T.); +#503271 = EDGE_CURVE('',#503264,#503272,#503274,.T.); +#503272 = VERTEX_POINT('',#503273); +#503273 = CARTESIAN_POINT('',(139.33,-73.76,-5.E-02)); +#503274 = CIRCLE('',#503275,0.139999827125); +#503275 = AXIS2_PLACEMENT_3D('',#503276,#503277,#503278); +#503276 = CARTESIAN_POINT('',(139.32999982712,-73.62000017287,-5.E-02)); +#503277 = DIRECTION('',(0.,0.,1.)); +#503278 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#503279 = ORIENTED_EDGE('',*,*,#503280,.T.); +#503280 = EDGE_CURVE('',#503272,#503281,#503283,.T.); +#503281 = VERTEX_POINT('',#503282); +#503282 = CARTESIAN_POINT('',(139.67,-73.76,-5.E-02)); +#503283 = LINE('',#503284,#503285); +#503284 = CARTESIAN_POINT('',(139.33,-73.76,-5.E-02)); +#503285 = VECTOR('',#503286,1.); +#503286 = DIRECTION('',(1.,0.,0.)); +#503287 = ORIENTED_EDGE('',*,*,#503288,.T.); +#503288 = EDGE_CURVE('',#503281,#503289,#503291,.T.); +#503289 = VERTEX_POINT('',#503290); +#503290 = CARTESIAN_POINT('',(139.81,-73.62,-5.E-02)); +#503291 = CIRCLE('',#503292,0.139999827125); +#503292 = AXIS2_PLACEMENT_3D('',#503293,#503294,#503295); +#503293 = CARTESIAN_POINT('',(139.67000017287,-73.62000017287,-5.E-02)); +#503294 = DIRECTION('',(0.,0.,1.)); +#503295 = DIRECTION('',(-1.234820451253E-06,-0.999999999999,0.)); +#503296 = ORIENTED_EDGE('',*,*,#503297,.T.); +#503297 = EDGE_CURVE('',#503289,#503236,#503298,.T.); +#503298 = LINE('',#503299,#503300); +#503299 = CARTESIAN_POINT('',(139.81,-73.62,-5.E-02)); +#503300 = VECTOR('',#503301,1.); +#503301 = DIRECTION('',(0.,1.,0.)); +#503302 = FACE_BOUND('',#503303,.T.); +#503303 = EDGE_LOOP('',(#503304,#503315,#503323,#503332,#503340,#503349, + #503357,#503366)); +#503304 = ORIENTED_EDGE('',*,*,#503305,.T.); +#503305 = EDGE_CURVE('',#503306,#503308,#503310,.T.); +#503306 = VERTEX_POINT('',#503307); +#503307 = CARTESIAN_POINT('',(139.81,-72.38,-5.E-02)); +#503308 = VERTEX_POINT('',#503309); +#503309 = CARTESIAN_POINT('',(139.67,-72.24,-5.E-02)); +#503310 = CIRCLE('',#503311,0.139999827125); +#503311 = AXIS2_PLACEMENT_3D('',#503312,#503313,#503314); +#503312 = CARTESIAN_POINT('',(139.67000017287,-72.37999982712,-5.E-02)); +#503313 = DIRECTION('',(0.,0.,1.)); +#503314 = DIRECTION('',(0.999999999999,-1.234820248241E-06,0.)); +#503315 = ORIENTED_EDGE('',*,*,#503316,.T.); +#503316 = EDGE_CURVE('',#503308,#503317,#503319,.T.); +#503317 = VERTEX_POINT('',#503318); +#503318 = CARTESIAN_POINT('',(139.33,-72.24,-5.E-02)); +#503319 = LINE('',#503320,#503321); +#503320 = CARTESIAN_POINT('',(139.67,-72.24,-5.E-02)); +#503321 = VECTOR('',#503322,1.); +#503322 = DIRECTION('',(-1.,0.,0.)); +#503323 = ORIENTED_EDGE('',*,*,#503324,.T.); +#503324 = EDGE_CURVE('',#503317,#503325,#503327,.T.); +#503325 = VERTEX_POINT('',#503326); +#503326 = CARTESIAN_POINT('',(139.19,-72.38,-5.E-02)); +#503327 = CIRCLE('',#503328,0.139999827125); +#503328 = AXIS2_PLACEMENT_3D('',#503329,#503330,#503331); +#503329 = CARTESIAN_POINT('',(139.32999982712,-72.37999982712,-5.E-02)); +#503330 = DIRECTION('',(0.,0.,1.)); +#503331 = DIRECTION('',(1.234820451253E-06,0.999999999999,-0.)); +#503332 = ORIENTED_EDGE('',*,*,#503333,.T.); +#503333 = EDGE_CURVE('',#503325,#503334,#503336,.T.); +#503334 = VERTEX_POINT('',#503335); +#503335 = CARTESIAN_POINT('',(139.19,-72.66,-5.E-02)); +#503336 = LINE('',#503337,#503338); +#503337 = CARTESIAN_POINT('',(139.19,-72.38,-5.E-02)); +#503338 = VECTOR('',#503339,1.); +#503339 = DIRECTION('',(0.,-1.,0.)); +#503340 = ORIENTED_EDGE('',*,*,#503341,.T.); +#503341 = EDGE_CURVE('',#503334,#503342,#503344,.T.); +#503342 = VERTEX_POINT('',#503343); +#503343 = CARTESIAN_POINT('',(139.33,-72.8,-5.E-02)); +#503344 = CIRCLE('',#503345,0.139999827125); +#503345 = AXIS2_PLACEMENT_3D('',#503346,#503347,#503348); +#503346 = CARTESIAN_POINT('',(139.32999982712,-72.66000017287,-5.E-02)); +#503347 = DIRECTION('',(0.,0.,1.)); +#503348 = DIRECTION('',(-0.999999999999,1.234820248241E-06,0.)); +#503349 = ORIENTED_EDGE('',*,*,#503350,.T.); +#503350 = EDGE_CURVE('',#503342,#503351,#503353,.T.); +#503351 = VERTEX_POINT('',#503352); +#503352 = CARTESIAN_POINT('',(139.67,-72.8,-5.E-02)); +#503353 = LINE('',#503354,#503355); +#503354 = CARTESIAN_POINT('',(139.33,-72.8,-5.E-02)); +#503355 = VECTOR('',#503356,1.); +#503356 = DIRECTION('',(1.,0.,0.)); +#503357 = ORIENTED_EDGE('',*,*,#503358,.T.); +#503358 = EDGE_CURVE('',#503351,#503359,#503361,.T.); +#503359 = VERTEX_POINT('',#503360); +#503360 = CARTESIAN_POINT('',(139.81,-72.66,-5.E-02)); +#503361 = CIRCLE('',#503362,0.139999827125); +#503362 = AXIS2_PLACEMENT_3D('',#503363,#503364,#503365); +#503363 = CARTESIAN_POINT('',(139.67000017287,-72.66000017287,-5.E-02)); +#503364 = DIRECTION('',(0.,0.,1.)); +#503365 = DIRECTION('',(-1.234820451253E-06,-0.999999999999,0.)); +#503366 = ORIENTED_EDGE('',*,*,#503367,.T.); +#503367 = EDGE_CURVE('',#503359,#503306,#503368,.T.); +#503368 = LINE('',#503369,#503370); +#503369 = CARTESIAN_POINT('',(139.81,-72.66,-5.E-02)); +#503370 = VECTOR('',#503371,1.); +#503371 = DIRECTION('',(0.,1.,0.)); +#503372 = FACE_BOUND('',#503373,.T.); +#503373 = EDGE_LOOP('',(#503374,#503385,#503393,#503402,#503410,#503419, + #503427,#503436)); +#503374 = ORIENTED_EDGE('',*,*,#503375,.T.); +#503375 = EDGE_CURVE('',#503376,#503378,#503380,.T.); +#503376 = VERTEX_POINT('',#503377); +#503377 = CARTESIAN_POINT('',(137.6375,-71.95,-5.E-02)); +#503378 = VERTEX_POINT('',#503379); +#503379 = CARTESIAN_POINT('',(137.4875,-71.8,-5.E-02)); +#503380 = CIRCLE('',#503381,0.150000058649); +#503381 = AXIS2_PLACEMENT_3D('',#503382,#503383,#503384); +#503382 = CARTESIAN_POINT('',(137.48749994135,-71.95000005864,-5.E-02)); +#503383 = DIRECTION('',(0.,0.,1.)); +#503384 = DIRECTION('',(1.,3.90995124759E-07,-0.)); +#503385 = ORIENTED_EDGE('',*,*,#503386,.T.); +#503386 = EDGE_CURVE('',#503378,#503387,#503389,.T.); +#503387 = VERTEX_POINT('',#503388); +#503388 = CARTESIAN_POINT('',(136.3125,-71.8,-5.E-02)); +#503389 = LINE('',#503390,#503391); +#503390 = CARTESIAN_POINT('',(137.4875,-71.8,-5.E-02)); +#503391 = VECTOR('',#503392,1.); +#503392 = DIRECTION('',(-1.,0.,0.)); +#503393 = ORIENTED_EDGE('',*,*,#503394,.T.); +#503394 = EDGE_CURVE('',#503387,#503395,#503397,.T.); +#503395 = VERTEX_POINT('',#503396); +#503396 = CARTESIAN_POINT('',(136.1625,-71.95,-5.E-02)); +#503397 = CIRCLE('',#503398,0.150000058649); +#503398 = AXIS2_PLACEMENT_3D('',#503399,#503400,#503401); +#503399 = CARTESIAN_POINT('',(136.31250005864,-71.95000005864,-5.E-02)); +#503400 = DIRECTION('',(0.,0.,1.)); +#503401 = DIRECTION('',(-3.909955984539E-07,1.,0.)); +#503402 = ORIENTED_EDGE('',*,*,#503403,.T.); +#503403 = EDGE_CURVE('',#503395,#503404,#503406,.T.); +#503404 = VERTEX_POINT('',#503405); +#503405 = CARTESIAN_POINT('',(136.1625,-72.25,-5.E-02)); +#503406 = LINE('',#503407,#503408); +#503407 = CARTESIAN_POINT('',(136.1625,-71.95,-5.E-02)); +#503408 = VECTOR('',#503409,1.); +#503409 = DIRECTION('',(0.,-1.,0.)); +#503410 = ORIENTED_EDGE('',*,*,#503411,.T.); +#503411 = EDGE_CURVE('',#503404,#503412,#503414,.T.); +#503412 = VERTEX_POINT('',#503413); +#503413 = CARTESIAN_POINT('',(136.3125,-72.4,-5.E-02)); +#503414 = CIRCLE('',#503415,0.150000058649); +#503415 = AXIS2_PLACEMENT_3D('',#503416,#503417,#503418); +#503416 = CARTESIAN_POINT('',(136.31250005864,-72.24999994135,-5.E-02)); +#503417 = DIRECTION('',(0.,0.,1.)); +#503418 = DIRECTION('',(-1.,-3.909955037148E-07,0.)); +#503419 = ORIENTED_EDGE('',*,*,#503420,.T.); +#503420 = EDGE_CURVE('',#503412,#503421,#503423,.T.); +#503421 = VERTEX_POINT('',#503422); +#503422 = CARTESIAN_POINT('',(137.4875,-72.4,-5.E-02)); +#503423 = LINE('',#503424,#503425); +#503424 = CARTESIAN_POINT('',(136.3125,-72.4,-5.E-02)); +#503425 = VECTOR('',#503426,1.); +#503426 = DIRECTION('',(1.,0.,0.)); +#503427 = ORIENTED_EDGE('',*,*,#503428,.T.); +#503428 = EDGE_CURVE('',#503421,#503429,#503431,.T.); +#503429 = VERTEX_POINT('',#503430); +#503430 = CARTESIAN_POINT('',(137.6375,-72.25,-5.E-02)); +#503431 = CIRCLE('',#503432,0.150000058649); +#503432 = AXIS2_PLACEMENT_3D('',#503433,#503434,#503435); +#503433 = CARTESIAN_POINT('',(137.48749994135,-72.24999994135,-5.E-02)); +#503434 = DIRECTION('',(0.,0.,1.)); +#503435 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#503436 = ORIENTED_EDGE('',*,*,#503437,.T.); +#503437 = EDGE_CURVE('',#503429,#503376,#503438,.T.); +#503438 = LINE('',#503439,#503440); +#503439 = CARTESIAN_POINT('',(137.6375,-72.25,-5.E-02)); +#503440 = VECTOR('',#503441,1.); +#503441 = DIRECTION('',(0.,1.,0.)); +#503442 = FACE_BOUND('',#503443,.T.); +#503443 = EDGE_LOOP('',(#503444,#503455,#503463,#503472,#503480,#503489, + #503497,#503506)); +#503444 = ORIENTED_EDGE('',*,*,#503445,.T.); +#503445 = EDGE_CURVE('',#503446,#503448,#503450,.T.); +#503446 = VERTEX_POINT('',#503447); +#503447 = CARTESIAN_POINT('',(139.5125,-71.,-5.E-02)); +#503448 = VERTEX_POINT('',#503449); +#503449 = CARTESIAN_POINT('',(139.3625,-70.85,-5.E-02)); +#503450 = CIRCLE('',#503451,0.150000058649); +#503451 = AXIS2_PLACEMENT_3D('',#503452,#503453,#503454); +#503452 = CARTESIAN_POINT('',(139.36249994135,-71.00000005864,-5.E-02)); +#503453 = DIRECTION('',(0.,0.,1.)); +#503454 = DIRECTION('',(1.,3.90995124759E-07,-0.)); +#503455 = ORIENTED_EDGE('',*,*,#503456,.T.); +#503456 = EDGE_CURVE('',#503448,#503457,#503459,.T.); +#503457 = VERTEX_POINT('',#503458); +#503458 = CARTESIAN_POINT('',(138.1875,-70.85,-5.E-02)); +#503459 = LINE('',#503460,#503461); +#503460 = CARTESIAN_POINT('',(139.3625,-70.85,-5.E-02)); +#503461 = VECTOR('',#503462,1.); +#503462 = DIRECTION('',(-1.,0.,0.)); +#503463 = ORIENTED_EDGE('',*,*,#503464,.T.); +#503464 = EDGE_CURVE('',#503457,#503465,#503467,.T.); +#503465 = VERTEX_POINT('',#503466); +#503466 = CARTESIAN_POINT('',(138.0375,-71.,-5.E-02)); +#503467 = CIRCLE('',#503468,0.150000058649); +#503468 = AXIS2_PLACEMENT_3D('',#503469,#503470,#503471); +#503469 = CARTESIAN_POINT('',(138.18750005864,-71.00000005864,-5.E-02)); +#503470 = DIRECTION('',(0.,0.,1.)); +#503471 = DIRECTION('',(-3.909955984539E-07,1.,0.)); +#503472 = ORIENTED_EDGE('',*,*,#503473,.T.); +#503473 = EDGE_CURVE('',#503465,#503474,#503476,.T.); +#503474 = VERTEX_POINT('',#503475); +#503475 = CARTESIAN_POINT('',(138.0375,-71.3,-5.E-02)); +#503476 = LINE('',#503477,#503478); +#503477 = CARTESIAN_POINT('',(138.0375,-71.,-5.E-02)); +#503478 = VECTOR('',#503479,1.); +#503479 = DIRECTION('',(0.,-1.,0.)); +#503480 = ORIENTED_EDGE('',*,*,#503481,.T.); +#503481 = EDGE_CURVE('',#503474,#503482,#503484,.T.); +#503482 = VERTEX_POINT('',#503483); +#503483 = CARTESIAN_POINT('',(138.1875,-71.45,-5.E-02)); +#503484 = CIRCLE('',#503485,0.150000058649); +#503485 = AXIS2_PLACEMENT_3D('',#503486,#503487,#503488); +#503486 = CARTESIAN_POINT('',(138.18750005864,-71.29999994135,-5.E-02)); +#503487 = DIRECTION('',(0.,0.,1.)); +#503488 = DIRECTION('',(-1.,-3.909955037148E-07,0.)); +#503489 = ORIENTED_EDGE('',*,*,#503490,.T.); +#503490 = EDGE_CURVE('',#503482,#503491,#503493,.T.); +#503491 = VERTEX_POINT('',#503492); +#503492 = CARTESIAN_POINT('',(139.3625,-71.45,-5.E-02)); +#503493 = LINE('',#503494,#503495); +#503494 = CARTESIAN_POINT('',(138.1875,-71.45,-5.E-02)); +#503495 = VECTOR('',#503496,1.); +#503496 = DIRECTION('',(1.,0.,0.)); +#503497 = ORIENTED_EDGE('',*,*,#503498,.T.); +#503498 = EDGE_CURVE('',#503491,#503499,#503501,.T.); +#503499 = VERTEX_POINT('',#503500); +#503500 = CARTESIAN_POINT('',(139.5125,-71.3,-5.E-02)); +#503501 = CIRCLE('',#503502,0.150000058649); +#503502 = AXIS2_PLACEMENT_3D('',#503503,#503504,#503505); +#503503 = CARTESIAN_POINT('',(139.36249994135,-71.29999994135,-5.E-02)); +#503504 = DIRECTION('',(0.,0.,1.)); +#503505 = DIRECTION('',(3.90995408976E-07,-1.,0.)); +#503506 = ORIENTED_EDGE('',*,*,#503507,.T.); +#503507 = EDGE_CURVE('',#503499,#503446,#503508,.T.); +#503508 = LINE('',#503509,#503510); +#503509 = CARTESIAN_POINT('',(139.5125,-71.3,-5.E-02)); +#503510 = VECTOR('',#503511,1.); +#503511 = DIRECTION('',(0.,1.,0.)); +#503512 = FACE_BOUND('',#503513,.T.); +#503513 = EDGE_LOOP('',(#503514)); +#503514 = ORIENTED_EDGE('',*,*,#503515,.T.); +#503515 = EDGE_CURVE('',#503516,#503516,#503518,.T.); +#503516 = VERTEX_POINT('',#503517); +#503517 = CARTESIAN_POINT('',(124.649999,-69.2,-5.E-02)); +#503518 = CIRCLE('',#503519,1.349999); +#503519 = AXIS2_PLACEMENT_3D('',#503520,#503521,#503522); +#503520 = CARTESIAN_POINT('',(123.3,-69.2,-5.E-02)); +#503521 = DIRECTION('',(0.,0.,1.)); +#503522 = DIRECTION('',(1.,0.,-0.)); +#503523 = FACE_BOUND('',#503524,.T.); +#503524 = EDGE_LOOP('',(#503525)); +#503525 = ORIENTED_EDGE('',*,*,#503526,.T.); +#503526 = EDGE_CURVE('',#503527,#503527,#503529,.T.); +#503527 = VERTEX_POINT('',#503528); +#503528 = CARTESIAN_POINT('',(153.049999,-69.2,-5.E-02)); +#503529 = CIRCLE('',#503530,1.349999); +#503530 = AXIS2_PLACEMENT_3D('',#503531,#503532,#503533); +#503531 = CARTESIAN_POINT('',(151.7,-69.2,-5.E-02)); +#503532 = DIRECTION('',(0.,0.,1.)); +#503533 = DIRECTION('',(1.,0.,-0.)); +#503534 = FACE_BOUND('',#503535,.T.); +#503535 = EDGE_LOOP('',(#503536,#503547,#503555,#503564,#503572,#503581, + #503589,#503598)); +#503536 = ORIENTED_EDGE('',*,*,#503537,.T.); +#503537 = EDGE_CURVE('',#503538,#503540,#503542,.T.); +#503538 = VERTEX_POINT('',#503539); +#503539 = CARTESIAN_POINT('',(137.6375,-70.05,-5.E-02)); +#503540 = VERTEX_POINT('',#503541); +#503541 = CARTESIAN_POINT('',(137.4875,-69.9,-5.E-02)); +#503542 = CIRCLE('',#503543,0.150000058649); +#503543 = AXIS2_PLACEMENT_3D('',#503544,#503545,#503546); +#503544 = CARTESIAN_POINT('',(137.48749994135,-70.05000005864,-5.E-02)); +#503545 = DIRECTION('',(0.,0.,1.)); +#503546 = DIRECTION('',(1.,3.909951247591E-07,-0.)); +#503547 = ORIENTED_EDGE('',*,*,#503548,.T.); +#503548 = EDGE_CURVE('',#503540,#503549,#503551,.T.); +#503549 = VERTEX_POINT('',#503550); +#503550 = CARTESIAN_POINT('',(136.3125,-69.9,-5.E-02)); +#503551 = LINE('',#503552,#503553); +#503552 = CARTESIAN_POINT('',(137.4875,-69.9,-5.E-02)); +#503553 = VECTOR('',#503554,1.); +#503554 = DIRECTION('',(-1.,0.,0.)); +#503555 = ORIENTED_EDGE('',*,*,#503556,.T.); +#503556 = EDGE_CURVE('',#503549,#503557,#503559,.T.); +#503557 = VERTEX_POINT('',#503558); +#503558 = CARTESIAN_POINT('',(136.1625,-70.05,-5.E-02)); +#503559 = CIRCLE('',#503560,0.150000058649); +#503560 = AXIS2_PLACEMENT_3D('',#503561,#503562,#503563); +#503561 = CARTESIAN_POINT('',(136.31250005864,-70.05000005864,-5.E-02)); +#503562 = DIRECTION('',(0.,0.,1.)); +#503563 = DIRECTION('',(-3.909954089759E-07,1.,0.)); +#503564 = ORIENTED_EDGE('',*,*,#503565,.T.); +#503565 = EDGE_CURVE('',#503557,#503566,#503568,.T.); +#503566 = VERTEX_POINT('',#503567); +#503567 = CARTESIAN_POINT('',(136.1625,-70.35,-5.E-02)); +#503568 = LINE('',#503569,#503570); +#503569 = CARTESIAN_POINT('',(136.1625,-70.05,-5.E-02)); +#503570 = VECTOR('',#503571,1.); +#503571 = DIRECTION('',(0.,-1.,0.)); +#503572 = ORIENTED_EDGE('',*,*,#503573,.T.); +#503573 = EDGE_CURVE('',#503566,#503574,#503576,.T.); +#503574 = VERTEX_POINT('',#503575); +#503575 = CARTESIAN_POINT('',(136.3125,-70.5,-5.E-02)); +#503576 = CIRCLE('',#503577,0.150000058649); +#503577 = AXIS2_PLACEMENT_3D('',#503578,#503579,#503580); +#503578 = CARTESIAN_POINT('',(136.31250005864,-70.34999994135,-5.E-02)); +#503579 = DIRECTION('',(0.,0.,1.)); +#503580 = DIRECTION('',(-1.,-3.909954089759E-07,0.)); +#503581 = ORIENTED_EDGE('',*,*,#503582,.T.); +#503582 = EDGE_CURVE('',#503574,#503583,#503585,.T.); +#503583 = VERTEX_POINT('',#503584); +#503584 = CARTESIAN_POINT('',(137.4875,-70.5,-5.E-02)); +#503585 = LINE('',#503586,#503587); +#503586 = CARTESIAN_POINT('',(136.3125,-70.5,-5.E-02)); +#503587 = VECTOR('',#503588,1.); +#503588 = DIRECTION('',(1.,0.,0.)); +#503589 = ORIENTED_EDGE('',*,*,#503590,.T.); +#503590 = EDGE_CURVE('',#503583,#503591,#503593,.T.); +#503591 = VERTEX_POINT('',#503592); +#503592 = CARTESIAN_POINT('',(137.6375,-70.35,-5.E-02)); +#503593 = CIRCLE('',#503594,0.150000058649); +#503594 = AXIS2_PLACEMENT_3D('',#503595,#503596,#503597); +#503595 = CARTESIAN_POINT('',(137.48749994135,-70.34999994135,-5.E-02)); +#503596 = DIRECTION('',(0.,0.,1.)); +#503597 = DIRECTION('',(3.909952194981E-07,-1.,0.)); +#503598 = ORIENTED_EDGE('',*,*,#503599,.T.); +#503599 = EDGE_CURVE('',#503591,#503538,#503600,.T.); +#503600 = LINE('',#503601,#503602); +#503601 = CARTESIAN_POINT('',(137.6375,-70.35,-5.E-02)); +#503602 = VECTOR('',#503603,1.); +#503603 = DIRECTION('',(0.,1.,0.)); +#503604 = FACE_BOUND('',#503605,.T.); +#503605 = EDGE_LOOP('',(#503606)); +#503606 = ORIENTED_EDGE('',*,*,#503607,.T.); +#503607 = EDGE_CURVE('',#503608,#503608,#503610,.T.); +#503608 = VERTEX_POINT('',#503609); +#503609 = CARTESIAN_POINT('',(121.975,-61.75,-5.E-02)); +#503610 = CIRCLE('',#503611,0.45); +#503611 = AXIS2_PLACEMENT_3D('',#503612,#503613,#503614); +#503612 = CARTESIAN_POINT('',(121.525,-61.75,-5.E-02)); +#503613 = DIRECTION('',(0.,0.,1.)); +#503614 = DIRECTION('',(1.,0.,-0.)); +#503615 = FACE_BOUND('',#503616,.T.); +#503616 = EDGE_LOOP('',(#503617)); +#503617 = ORIENTED_EDGE('',*,*,#503618,.T.); +#503618 = EDGE_CURVE('',#503619,#503619,#503621,.T.); +#503619 = VERTEX_POINT('',#503620); +#503620 = CARTESIAN_POINT('',(126.225,-61.75,-5.E-02)); +#503621 = CIRCLE('',#503622,0.45); +#503622 = AXIS2_PLACEMENT_3D('',#503623,#503624,#503625); +#503623 = CARTESIAN_POINT('',(125.775,-61.75,-5.E-02)); +#503624 = DIRECTION('',(0.,0.,1.)); +#503625 = DIRECTION('',(1.,0.,-0.)); +#503626 = FACE_BOUND('',#503627,.T.); +#503627 = EDGE_LOOP('',(#503628)); +#503628 = ORIENTED_EDGE('',*,*,#503629,.T.); +#503629 = EDGE_CURVE('',#503630,#503630,#503632,.T.); +#503630 = VERTEX_POINT('',#503631); +#503631 = CARTESIAN_POINT('',(149.675,-61.75,-5.E-02)); +#503632 = CIRCLE('',#503633,0.45); +#503633 = AXIS2_PLACEMENT_3D('',#503634,#503635,#503636); +#503634 = CARTESIAN_POINT('',(149.225,-61.75,-5.E-02)); +#503635 = DIRECTION('',(0.,0.,1.)); +#503636 = DIRECTION('',(1.,0.,-0.)); +#503637 = FACE_BOUND('',#503638,.T.); +#503638 = EDGE_LOOP('',(#503639)); +#503639 = ORIENTED_EDGE('',*,*,#503640,.T.); +#503640 = EDGE_CURVE('',#503641,#503641,#503643,.T.); +#503641 = VERTEX_POINT('',#503642); +#503642 = CARTESIAN_POINT('',(153.925,-61.75,-5.E-02)); +#503643 = CIRCLE('',#503644,0.45); +#503644 = AXIS2_PLACEMENT_3D('',#503645,#503646,#503647); +#503645 = CARTESIAN_POINT('',(153.475,-61.75,-5.E-02)); +#503646 = DIRECTION('',(0.,0.,1.)); +#503647 = DIRECTION('',(1.,0.,-0.)); +#503648 = PLANE('',#503649); +#503649 = AXIS2_PLACEMENT_3D('',#503650,#503651,#503652); +#503650 = CARTESIAN_POINT('',(0.,0.,-5.E-02)); +#503651 = DIRECTION('',(-0.,-0.,-1.)); +#503652 = DIRECTION('',(-1.,0.,0.)); +#503653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#503657)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#503654,#503655,#503656)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#503654 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#503655 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#503656 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#503657 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#503654, + 'distance_accuracy_value','confusion accuracy'); +#503658 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#503659,#503661); +#503659 = ( REPRESENTATION_RELATIONSHIP('','',#495326,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#503660) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#503660 = ITEM_DEFINED_TRANSFORMATION('','',#11,#379); +#503661 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #503662); +#503662 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('118','=>[0:1:1:57]','',#5, + #495321,$); +#503663 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#495323)); +#503664 = SHAPE_DEFINITION_REPRESENTATION(#503665,#503671); +#503665 = PRODUCT_DEFINITION_SHAPE('','',#503666); +#503666 = PRODUCT_DEFINITION('design','',#503667,#503670); +#503667 = PRODUCT_DEFINITION_FORMATION('','',#503668); +#503668 = PRODUCT('snips_controller-unsaved-export-kiHHnP_PCB', + 'snips_controller-unsaved-export-kiHHnP_PCB','',(#503669)); +#503669 = PRODUCT_CONTEXT('',#2,'mechanical'); +#503670 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#503671 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#503672),#506644); +#503672 = MANIFOLD_SOLID_BREP('',#503673); +#503673 = CLOSED_SHELL('',(#503674,#503714,#503745,#503776,#504575, + #505374,#505386,#505403,#505420,#505437,#505454,#505471,#505488, + #505510,#505527,#505544,#505556,#505578,#505595,#505612,#505624, + #505641,#505658,#505675,#505692,#505709,#505726,#505743,#505760, + #505777,#505794,#505811,#505828,#505845,#505862,#505879,#505896, + #505913,#505935,#505952,#505969,#505981,#506003,#506020,#506037, + #506049,#506066,#506083,#506100,#506117,#506134,#506151,#506168, + #506185,#506202,#506219,#506236,#506253,#506270,#506287,#506304, + #506321,#506338,#506355,#506372,#506389,#506406,#506423,#506440, + #506457,#506474,#506491,#506508,#506525,#506542,#506559,#506576, + #506593,#506610,#506627)); +#503674 = ADVANCED_FACE('',(#503675),#503709,.T.); +#503675 = FACE_BOUND('',#503676,.T.); +#503676 = EDGE_LOOP('',(#503677,#503687,#503695,#503703)); +#503677 = ORIENTED_EDGE('',*,*,#503678,.T.); +#503678 = EDGE_CURVE('',#503679,#503681,#503683,.T.); +#503679 = VERTEX_POINT('',#503680); +#503680 = CARTESIAN_POINT('',(155.,-159.9,0.)); +#503681 = VERTEX_POINT('',#503682); +#503682 = CARTESIAN_POINT('',(155.,-159.9,1.51)); +#503683 = LINE('',#503684,#503685); +#503684 = CARTESIAN_POINT('',(155.,-159.9,0.)); +#503685 = VECTOR('',#503686,1.); +#503686 = DIRECTION('',(0.,0.,1.)); +#503687 = ORIENTED_EDGE('',*,*,#503688,.T.); +#503688 = EDGE_CURVE('',#503681,#503689,#503691,.T.); +#503689 = VERTEX_POINT('',#503690); +#503690 = CARTESIAN_POINT('',(120.,-159.9,1.51)); +#503691 = LINE('',#503692,#503693); +#503692 = CARTESIAN_POINT('',(155.,-159.9,1.51)); +#503693 = VECTOR('',#503694,1.); +#503694 = DIRECTION('',(-1.,0.,0.)); +#503695 = ORIENTED_EDGE('',*,*,#503696,.F.); +#503696 = EDGE_CURVE('',#503697,#503689,#503699,.T.); +#503697 = VERTEX_POINT('',#503698); +#503698 = CARTESIAN_POINT('',(120.,-159.9,0.)); +#503699 = LINE('',#503700,#503701); +#503700 = CARTESIAN_POINT('',(120.,-159.9,0.)); +#503701 = VECTOR('',#503702,1.); +#503702 = DIRECTION('',(0.,0.,1.)); +#503703 = ORIENTED_EDGE('',*,*,#503704,.F.); +#503704 = EDGE_CURVE('',#503679,#503697,#503705,.T.); +#503705 = LINE('',#503706,#503707); +#503706 = CARTESIAN_POINT('',(155.,-159.9,0.)); +#503707 = VECTOR('',#503708,1.); +#503708 = DIRECTION('',(-1.,0.,0.)); +#503709 = PLANE('',#503710); +#503710 = AXIS2_PLACEMENT_3D('',#503711,#503712,#503713); +#503711 = CARTESIAN_POINT('',(155.,-159.9,0.)); +#503712 = DIRECTION('',(0.,-1.,0.)); +#503713 = DIRECTION('',(-1.,0.,0.)); +#503714 = ADVANCED_FACE('',(#503715),#503740,.T.); +#503715 = FACE_BOUND('',#503716,.T.); +#503716 = EDGE_LOOP('',(#503717,#503727,#503733,#503734)); +#503717 = ORIENTED_EDGE('',*,*,#503718,.T.); +#503718 = EDGE_CURVE('',#503719,#503721,#503723,.T.); +#503719 = VERTEX_POINT('',#503720); +#503720 = CARTESIAN_POINT('',(155.,-60.,0.)); +#503721 = VERTEX_POINT('',#503722); +#503722 = CARTESIAN_POINT('',(155.,-60.,1.51)); +#503723 = LINE('',#503724,#503725); +#503724 = CARTESIAN_POINT('',(155.,-60.,0.)); +#503725 = VECTOR('',#503726,1.); +#503726 = DIRECTION('',(0.,0.,1.)); +#503727 = ORIENTED_EDGE('',*,*,#503728,.T.); +#503728 = EDGE_CURVE('',#503721,#503681,#503729,.T.); +#503729 = LINE('',#503730,#503731); +#503730 = CARTESIAN_POINT('',(155.,-60.,1.51)); +#503731 = VECTOR('',#503732,1.); +#503732 = DIRECTION('',(0.,-1.,0.)); +#503733 = ORIENTED_EDGE('',*,*,#503678,.F.); +#503734 = ORIENTED_EDGE('',*,*,#503735,.F.); +#503735 = EDGE_CURVE('',#503719,#503679,#503736,.T.); +#503736 = LINE('',#503737,#503738); +#503737 = CARTESIAN_POINT('',(155.,-60.,0.)); +#503738 = VECTOR('',#503739,1.); +#503739 = DIRECTION('',(0.,-1.,0.)); +#503740 = PLANE('',#503741); +#503741 = AXIS2_PLACEMENT_3D('',#503742,#503743,#503744); +#503742 = CARTESIAN_POINT('',(155.,-60.,0.)); +#503743 = DIRECTION('',(1.,0.,-0.)); +#503744 = DIRECTION('',(0.,-1.,0.)); +#503745 = ADVANCED_FACE('',(#503746),#503771,.T.); +#503746 = FACE_BOUND('',#503747,.T.); +#503747 = EDGE_LOOP('',(#503748,#503749,#503757,#503765)); +#503748 = ORIENTED_EDGE('',*,*,#503696,.T.); +#503749 = ORIENTED_EDGE('',*,*,#503750,.T.); +#503750 = EDGE_CURVE('',#503689,#503751,#503753,.T.); +#503751 = VERTEX_POINT('',#503752); +#503752 = CARTESIAN_POINT('',(120.,-60.,1.51)); +#503753 = LINE('',#503754,#503755); +#503754 = CARTESIAN_POINT('',(120.,-159.9,1.51)); +#503755 = VECTOR('',#503756,1.); +#503756 = DIRECTION('',(0.,1.,0.)); +#503757 = ORIENTED_EDGE('',*,*,#503758,.F.); +#503758 = EDGE_CURVE('',#503759,#503751,#503761,.T.); +#503759 = VERTEX_POINT('',#503760); +#503760 = CARTESIAN_POINT('',(120.,-60.,0.)); +#503761 = LINE('',#503762,#503763); +#503762 = CARTESIAN_POINT('',(120.,-60.,0.)); +#503763 = VECTOR('',#503764,1.); +#503764 = DIRECTION('',(0.,0.,1.)); +#503765 = ORIENTED_EDGE('',*,*,#503766,.F.); +#503766 = EDGE_CURVE('',#503697,#503759,#503767,.T.); +#503767 = LINE('',#503768,#503769); +#503768 = CARTESIAN_POINT('',(120.,-159.9,0.)); +#503769 = VECTOR('',#503770,1.); +#503770 = DIRECTION('',(0.,1.,0.)); +#503771 = PLANE('',#503772); +#503772 = AXIS2_PLACEMENT_3D('',#503773,#503774,#503775); +#503773 = CARTESIAN_POINT('',(120.,-159.9,0.)); +#503774 = DIRECTION('',(-1.,0.,0.)); +#503775 = DIRECTION('',(0.,1.,0.)); +#503776 = ADVANCED_FACE('',(#503777,#503788,#503799,#503810,#503821, + #503832,#503843,#503854,#503890,#503926,#503937,#503948,#503959, + #503970,#503981,#503992,#504003,#504014,#504025,#504036,#504047, + #504058,#504069,#504080,#504091,#504102,#504113,#504149,#504185, + #504196,#504207,#504218,#504229,#504240,#504251,#504262,#504273, + #504284,#504295,#504306,#504317,#504328,#504339,#504350,#504361, + #504372,#504383,#504394,#504405,#504416,#504427,#504438,#504449, + #504460,#504471,#504482,#504493,#504504,#504515,#504526,#504537, + #504548,#504559),#504570,.F.); +#503777 = FACE_BOUND('',#503778,.F.); +#503778 = EDGE_LOOP('',(#503779,#503780,#503781,#503787)); +#503779 = ORIENTED_EDGE('',*,*,#503704,.F.); +#503780 = ORIENTED_EDGE('',*,*,#503735,.F.); +#503781 = ORIENTED_EDGE('',*,*,#503782,.F.); +#503782 = EDGE_CURVE('',#503759,#503719,#503783,.T.); +#503783 = LINE('',#503784,#503785); +#503784 = CARTESIAN_POINT('',(120.,-60.,0.)); +#503785 = VECTOR('',#503786,1.); +#503786 = DIRECTION('',(1.,0.,0.)); +#503787 = ORIENTED_EDGE('',*,*,#503766,.F.); +#503788 = FACE_BOUND('',#503789,.F.); +#503789 = EDGE_LOOP('',(#503790)); +#503790 = ORIENTED_EDGE('',*,*,#503791,.T.); +#503791 = EDGE_CURVE('',#503792,#503792,#503794,.T.); +#503792 = VERTEX_POINT('',#503793); +#503793 = CARTESIAN_POINT('',(123.,-157.85,0.)); +#503794 = CIRCLE('',#503795,1.35); +#503795 = AXIS2_PLACEMENT_3D('',#503796,#503797,#503798); +#503796 = CARTESIAN_POINT('',(123.,-156.5,0.)); +#503797 = DIRECTION('',(-0.,0.,-1.)); +#503798 = DIRECTION('',(-0.,-1.,0.)); +#503799 = FACE_BOUND('',#503800,.F.); +#503800 = EDGE_LOOP('',(#503801)); +#503801 = ORIENTED_EDGE('',*,*,#503802,.T.); +#503802 = EDGE_CURVE('',#503803,#503803,#503805,.T.); +#503803 = VERTEX_POINT('',#503804); +#503804 = CARTESIAN_POINT('',(124.,-149.96,0.)); +#503805 = CIRCLE('',#503806,0.46); +#503806 = AXIS2_PLACEMENT_3D('',#503807,#503808,#503809); +#503807 = CARTESIAN_POINT('',(124.,-149.5,0.)); +#503808 = DIRECTION('',(-0.,0.,-1.)); +#503809 = DIRECTION('',(-0.,-1.,0.)); +#503810 = FACE_BOUND('',#503811,.F.); +#503811 = EDGE_LOOP('',(#503812)); +#503812 = ORIENTED_EDGE('',*,*,#503813,.T.); +#503813 = EDGE_CURVE('',#503814,#503814,#503816,.T.); +#503814 = VERTEX_POINT('',#503815); +#503815 = CARTESIAN_POINT('',(126.875,-158.4,0.)); +#503816 = CIRCLE('',#503817,0.45); +#503817 = AXIS2_PLACEMENT_3D('',#503818,#503819,#503820); +#503818 = CARTESIAN_POINT('',(126.875,-157.95,0.)); +#503819 = DIRECTION('',(-0.,0.,-1.)); +#503820 = DIRECTION('',(-0.,-1.,0.)); +#503821 = FACE_BOUND('',#503822,.F.); +#503822 = EDGE_LOOP('',(#503823)); +#503823 = ORIENTED_EDGE('',*,*,#503824,.T.); +#503824 = EDGE_CURVE('',#503825,#503825,#503827,.T.); +#503825 = VERTEX_POINT('',#503826); +#503826 = CARTESIAN_POINT('',(126.,-149.96,0.)); +#503827 = CIRCLE('',#503828,0.46); +#503828 = AXIS2_PLACEMENT_3D('',#503829,#503830,#503831); +#503829 = CARTESIAN_POINT('',(126.,-149.5,0.)); +#503830 = DIRECTION('',(-0.,0.,-1.)); +#503831 = DIRECTION('',(-0.,-1.,0.)); +#503832 = FACE_BOUND('',#503833,.F.); +#503833 = EDGE_LOOP('',(#503834)); +#503834 = ORIENTED_EDGE('',*,*,#503835,.T.); +#503835 = EDGE_CURVE('',#503836,#503836,#503838,.T.); +#503836 = VERTEX_POINT('',#503837); +#503837 = CARTESIAN_POINT('',(128.,-149.96,0.)); +#503838 = CIRCLE('',#503839,0.46); +#503839 = AXIS2_PLACEMENT_3D('',#503840,#503841,#503842); +#503840 = CARTESIAN_POINT('',(128.,-149.5,0.)); +#503841 = DIRECTION('',(-0.,0.,-1.)); +#503842 = DIRECTION('',(-0.,-1.,0.)); +#503843 = FACE_BOUND('',#503844,.F.); +#503844 = EDGE_LOOP('',(#503845)); +#503845 = ORIENTED_EDGE('',*,*,#503846,.T.); +#503846 = EDGE_CURVE('',#503847,#503847,#503849,.T.); +#503847 = VERTEX_POINT('',#503848); +#503848 = CARTESIAN_POINT('',(131.125,-158.4,0.)); +#503849 = CIRCLE('',#503850,0.45); +#503850 = AXIS2_PLACEMENT_3D('',#503851,#503852,#503853); +#503851 = CARTESIAN_POINT('',(131.125,-157.95,0.)); +#503852 = DIRECTION('',(-0.,0.,-1.)); +#503853 = DIRECTION('',(-0.,-1.,0.)); +#503854 = FACE_BOUND('',#503855,.F.); +#503855 = EDGE_LOOP('',(#503856,#503867,#503875,#503884)); +#503856 = ORIENTED_EDGE('',*,*,#503857,.T.); +#503857 = EDGE_CURVE('',#503858,#503860,#503862,.T.); +#503858 = VERTEX_POINT('',#503859); +#503859 = CARTESIAN_POINT('',(133.48,-158.45,0.)); +#503860 = VERTEX_POINT('',#503861); +#503861 = CARTESIAN_POINT('',(132.88,-158.45,0.)); +#503862 = CIRCLE('',#503863,0.3); +#503863 = AXIS2_PLACEMENT_3D('',#503864,#503865,#503866); +#503864 = CARTESIAN_POINT('',(133.18,-158.45,0.)); +#503865 = DIRECTION('',(-0.,0.,-1.)); +#503866 = DIRECTION('',(-1.,9.473903143469E-14,0.)); +#503867 = ORIENTED_EDGE('',*,*,#503868,.T.); +#503868 = EDGE_CURVE('',#503860,#503869,#503871,.T.); +#503869 = VERTEX_POINT('',#503870); +#503870 = CARTESIAN_POINT('',(132.88,-157.85,0.)); +#503871 = LINE('',#503872,#503873); +#503872 = CARTESIAN_POINT('',(132.88,-78.925,0.)); +#503873 = VECTOR('',#503874,1.); +#503874 = DIRECTION('',(-0.,1.,0.)); +#503875 = ORIENTED_EDGE('',*,*,#503876,.T.); +#503876 = EDGE_CURVE('',#503869,#503877,#503879,.T.); +#503877 = VERTEX_POINT('',#503878); +#503878 = CARTESIAN_POINT('',(133.48,-157.85,0.)); +#503879 = CIRCLE('',#503880,0.3); +#503880 = AXIS2_PLACEMENT_3D('',#503881,#503882,#503883); +#503881 = CARTESIAN_POINT('',(133.18,-157.85,0.)); +#503882 = DIRECTION('',(0.,-0.,-1.)); +#503883 = DIRECTION('',(1.,0.,-0.)); +#503884 = ORIENTED_EDGE('',*,*,#503885,.T.); +#503885 = EDGE_CURVE('',#503877,#503858,#503886,.T.); +#503886 = LINE('',#503887,#503888); +#503887 = CARTESIAN_POINT('',(133.48,-79.225,0.)); +#503888 = VECTOR('',#503889,1.); +#503889 = DIRECTION('',(0.,-1.,0.)); +#503890 = FACE_BOUND('',#503891,.F.); +#503891 = EDGE_LOOP('',(#503892,#503903,#503911,#503920)); +#503892 = ORIENTED_EDGE('',*,*,#503893,.T.); +#503893 = EDGE_CURVE('',#503894,#503896,#503898,.T.); +#503894 = VERTEX_POINT('',#503895); +#503895 = CARTESIAN_POINT('',(133.48,-154.52,0.)); +#503896 = VERTEX_POINT('',#503897); +#503897 = CARTESIAN_POINT('',(132.88,-154.52,0.)); +#503898 = CIRCLE('',#503899,0.3); +#503899 = AXIS2_PLACEMENT_3D('',#503900,#503901,#503902); +#503900 = CARTESIAN_POINT('',(133.18,-154.52,0.)); +#503901 = DIRECTION('',(-0.,0.,-1.)); +#503902 = DIRECTION('',(-1.,0.,0.)); +#503903 = ORIENTED_EDGE('',*,*,#503904,.T.); +#503904 = EDGE_CURVE('',#503896,#503905,#503907,.T.); +#503905 = VERTEX_POINT('',#503906); +#503906 = CARTESIAN_POINT('',(132.88,-153.42,0.)); +#503907 = LINE('',#503908,#503909); +#503908 = CARTESIAN_POINT('',(132.88,-76.71,0.)); +#503909 = VECTOR('',#503910,1.); +#503910 = DIRECTION('',(-0.,1.,0.)); +#503911 = ORIENTED_EDGE('',*,*,#503912,.T.); +#503912 = EDGE_CURVE('',#503905,#503913,#503915,.T.); +#503913 = VERTEX_POINT('',#503914); +#503914 = CARTESIAN_POINT('',(133.48,-153.42,0.)); +#503915 = CIRCLE('',#503916,0.3); +#503916 = AXIS2_PLACEMENT_3D('',#503917,#503918,#503919); +#503917 = CARTESIAN_POINT('',(133.18,-153.42,0.)); +#503918 = DIRECTION('',(0.,-0.,-1.)); +#503919 = DIRECTION('',(1.,0.,-0.)); +#503920 = ORIENTED_EDGE('',*,*,#503921,.T.); +#503921 = EDGE_CURVE('',#503913,#503894,#503922,.T.); +#503922 = LINE('',#503923,#503924); +#503923 = CARTESIAN_POINT('',(133.48,-77.26,0.)); +#503924 = VECTOR('',#503925,1.); +#503925 = DIRECTION('',(0.,-1.,0.)); +#503926 = FACE_BOUND('',#503927,.F.); +#503927 = EDGE_LOOP('',(#503928)); +#503928 = ORIENTED_EDGE('',*,*,#503929,.T.); +#503929 = EDGE_CURVE('',#503930,#503930,#503932,.T.); +#503930 = VERTEX_POINT('',#503931); +#503931 = CARTESIAN_POINT('',(130.,-149.96,0.)); +#503932 = CIRCLE('',#503933,0.46); +#503933 = AXIS2_PLACEMENT_3D('',#503934,#503935,#503936); +#503934 = CARTESIAN_POINT('',(130.,-149.5,0.)); +#503935 = DIRECTION('',(-0.,0.,-1.)); +#503936 = DIRECTION('',(-0.,-1.,0.)); +#503937 = FACE_BOUND('',#503938,.F.); +#503938 = EDGE_LOOP('',(#503939)); +#503939 = ORIENTED_EDGE('',*,*,#503940,.T.); +#503940 = EDGE_CURVE('',#503941,#503941,#503943,.T.); +#503941 = VERTEX_POINT('',#503942); +#503942 = CARTESIAN_POINT('',(132.,-149.96,0.)); +#503943 = CIRCLE('',#503944,0.46); +#503944 = AXIS2_PLACEMENT_3D('',#503945,#503946,#503947); +#503945 = CARTESIAN_POINT('',(132.,-149.5,0.)); +#503946 = DIRECTION('',(-0.,0.,-1.)); +#503947 = DIRECTION('',(-0.,-1.,0.)); +#503948 = FACE_BOUND('',#503949,.F.); +#503949 = EDGE_LOOP('',(#503950)); +#503950 = ORIENTED_EDGE('',*,*,#503951,.T.); +#503951 = EDGE_CURVE('',#503952,#503952,#503954,.T.); +#503952 = VERTEX_POINT('',#503953); +#503953 = CARTESIAN_POINT('',(134.61,-154.825,0.)); +#503954 = CIRCLE('',#503955,0.325); +#503955 = AXIS2_PLACEMENT_3D('',#503956,#503957,#503958); +#503956 = CARTESIAN_POINT('',(134.61,-154.5,0.)); +#503957 = DIRECTION('',(-0.,0.,-1.)); +#503958 = DIRECTION('',(-0.,-1.,0.)); +#503959 = FACE_BOUND('',#503960,.F.); +#503960 = EDGE_LOOP('',(#503961)); +#503961 = ORIENTED_EDGE('',*,*,#503962,.T.); +#503962 = EDGE_CURVE('',#503963,#503963,#503965,.T.); +#503963 = VERTEX_POINT('',#503964); +#503964 = CARTESIAN_POINT('',(134.,-149.96,0.)); +#503965 = CIRCLE('',#503966,0.46); +#503966 = AXIS2_PLACEMENT_3D('',#503967,#503968,#503969); +#503967 = CARTESIAN_POINT('',(134.,-149.5,0.)); +#503968 = DIRECTION('',(-0.,0.,-1.)); +#503969 = DIRECTION('',(-0.,-1.,0.)); +#503970 = FACE_BOUND('',#503971,.F.); +#503971 = EDGE_LOOP('',(#503972)); +#503972 = ORIENTED_EDGE('',*,*,#503973,.T.); +#503973 = EDGE_CURVE('',#503974,#503974,#503976,.T.); +#503974 = VERTEX_POINT('',#503975); +#503975 = CARTESIAN_POINT('',(136.,-149.96,0.)); +#503976 = CIRCLE('',#503977,0.46); +#503977 = AXIS2_PLACEMENT_3D('',#503978,#503979,#503980); +#503978 = CARTESIAN_POINT('',(136.,-149.5,0.)); +#503979 = DIRECTION('',(-0.,0.,-1.)); +#503980 = DIRECTION('',(-0.,-1.,0.)); +#503981 = FACE_BOUND('',#503982,.F.); +#503982 = EDGE_LOOP('',(#503983)); +#503983 = ORIENTED_EDGE('',*,*,#503984,.T.); +#503984 = EDGE_CURVE('',#503985,#503985,#503987,.T.); +#503985 = VERTEX_POINT('',#503986); +#503986 = CARTESIAN_POINT('',(124.,-127.96,0.)); +#503987 = CIRCLE('',#503988,0.46); +#503988 = AXIS2_PLACEMENT_3D('',#503989,#503990,#503991); +#503989 = CARTESIAN_POINT('',(124.,-127.5,0.)); +#503990 = DIRECTION('',(-0.,0.,-1.)); +#503991 = DIRECTION('',(-0.,-1.,0.)); +#503992 = FACE_BOUND('',#503993,.F.); +#503993 = EDGE_LOOP('',(#503994)); +#503994 = ORIENTED_EDGE('',*,*,#503995,.T.); +#503995 = EDGE_CURVE('',#503996,#503996,#503998,.T.); +#503996 = VERTEX_POINT('',#503997); +#503997 = CARTESIAN_POINT('',(126.,-127.96,0.)); +#503998 = CIRCLE('',#503999,0.46); +#503999 = AXIS2_PLACEMENT_3D('',#504000,#504001,#504002); +#504000 = CARTESIAN_POINT('',(126.,-127.5,0.)); +#504001 = DIRECTION('',(-0.,0.,-1.)); +#504002 = DIRECTION('',(-0.,-1.,0.)); +#504003 = FACE_BOUND('',#504004,.F.); +#504004 = EDGE_LOOP('',(#504005)); +#504005 = ORIENTED_EDGE('',*,*,#504006,.T.); +#504006 = EDGE_CURVE('',#504007,#504007,#504009,.T.); +#504007 = VERTEX_POINT('',#504008); +#504008 = CARTESIAN_POINT('',(128.,-127.96,0.)); +#504009 = CIRCLE('',#504010,0.46); +#504010 = AXIS2_PLACEMENT_3D('',#504011,#504012,#504013); +#504011 = CARTESIAN_POINT('',(128.,-127.5,0.)); +#504012 = DIRECTION('',(-0.,0.,-1.)); +#504013 = DIRECTION('',(-0.,-1.,0.)); +#504014 = FACE_BOUND('',#504015,.F.); +#504015 = EDGE_LOOP('',(#504016)); +#504016 = ORIENTED_EDGE('',*,*,#504017,.T.); +#504017 = EDGE_CURVE('',#504018,#504018,#504020,.T.); +#504018 = VERTEX_POINT('',#504019); +#504019 = CARTESIAN_POINT('',(130.,-127.96,0.)); +#504020 = CIRCLE('',#504021,0.46); +#504021 = AXIS2_PLACEMENT_3D('',#504022,#504023,#504024); +#504022 = CARTESIAN_POINT('',(130.,-127.5,0.)); +#504023 = DIRECTION('',(-0.,0.,-1.)); +#504024 = DIRECTION('',(-0.,-1.,0.)); +#504025 = FACE_BOUND('',#504026,.F.); +#504026 = EDGE_LOOP('',(#504027)); +#504027 = ORIENTED_EDGE('',*,*,#504028,.T.); +#504028 = EDGE_CURVE('',#504029,#504029,#504031,.T.); +#504029 = VERTEX_POINT('',#504030); +#504030 = CARTESIAN_POINT('',(132.,-127.96,0.)); +#504031 = CIRCLE('',#504032,0.46); +#504032 = AXIS2_PLACEMENT_3D('',#504033,#504034,#504035); +#504033 = CARTESIAN_POINT('',(132.,-127.5,0.)); +#504034 = DIRECTION('',(-0.,0.,-1.)); +#504035 = DIRECTION('',(-0.,-1.,0.)); +#504036 = FACE_BOUND('',#504037,.F.); +#504037 = EDGE_LOOP('',(#504038)); +#504038 = ORIENTED_EDGE('',*,*,#504039,.T.); +#504039 = EDGE_CURVE('',#504040,#504040,#504042,.T.); +#504040 = VERTEX_POINT('',#504041); +#504041 = CARTESIAN_POINT('',(134.,-127.96,0.)); +#504042 = CIRCLE('',#504043,0.46); +#504043 = AXIS2_PLACEMENT_3D('',#504044,#504045,#504046); +#504044 = CARTESIAN_POINT('',(134.,-127.5,0.)); +#504045 = DIRECTION('',(-0.,0.,-1.)); +#504046 = DIRECTION('',(-0.,-1.,0.)); +#504047 = FACE_BOUND('',#504048,.F.); +#504048 = EDGE_LOOP('',(#504049)); +#504049 = ORIENTED_EDGE('',*,*,#504050,.T.); +#504050 = EDGE_CURVE('',#504051,#504051,#504053,.T.); +#504051 = VERTEX_POINT('',#504052); +#504052 = CARTESIAN_POINT('',(136.,-127.96,0.)); +#504053 = CIRCLE('',#504054,0.46); +#504054 = AXIS2_PLACEMENT_3D('',#504055,#504056,#504057); +#504055 = CARTESIAN_POINT('',(136.,-127.5,0.)); +#504056 = DIRECTION('',(-0.,0.,-1.)); +#504057 = DIRECTION('',(-0.,-1.,0.)); +#504058 = FACE_BOUND('',#504059,.F.); +#504059 = EDGE_LOOP('',(#504060)); +#504060 = ORIENTED_EDGE('',*,*,#504061,.T.); +#504061 = EDGE_CURVE('',#504062,#504062,#504064,.T.); +#504062 = VERTEX_POINT('',#504063); +#504063 = CARTESIAN_POINT('',(133.,-119.6,0.)); +#504064 = CIRCLE('',#504065,1.E-01); +#504065 = AXIS2_PLACEMENT_3D('',#504066,#504067,#504068); +#504066 = CARTESIAN_POINT('',(133.,-119.5,0.)); +#504067 = DIRECTION('',(-0.,0.,-1.)); +#504068 = DIRECTION('',(-0.,-1.,0.)); +#504069 = FACE_BOUND('',#504070,.F.); +#504070 = EDGE_LOOP('',(#504071)); +#504071 = ORIENTED_EDGE('',*,*,#504072,.T.); +#504072 = EDGE_CURVE('',#504073,#504073,#504075,.T.); +#504073 = VERTEX_POINT('',#504074); +#504074 = CARTESIAN_POINT('',(133.,-118.6,0.)); +#504075 = CIRCLE('',#504076,1.E-01); +#504076 = AXIS2_PLACEMENT_3D('',#504077,#504078,#504079); +#504077 = CARTESIAN_POINT('',(133.,-118.5,0.)); +#504078 = DIRECTION('',(-0.,0.,-1.)); +#504079 = DIRECTION('',(-0.,-1.,0.)); +#504080 = FACE_BOUND('',#504081,.F.); +#504081 = EDGE_LOOP('',(#504082)); +#504082 = ORIENTED_EDGE('',*,*,#504083,.T.); +#504083 = EDGE_CURVE('',#504084,#504084,#504086,.T.); +#504084 = VERTEX_POINT('',#504085); +#504085 = CARTESIAN_POINT('',(140.39,-154.825,0.)); +#504086 = CIRCLE('',#504087,0.325); +#504087 = AXIS2_PLACEMENT_3D('',#504088,#504089,#504090); +#504088 = CARTESIAN_POINT('',(140.39,-154.5,0.)); +#504089 = DIRECTION('',(-0.,0.,-1.)); +#504090 = DIRECTION('',(-0.,-1.,0.)); +#504091 = FACE_BOUND('',#504092,.F.); +#504092 = EDGE_LOOP('',(#504093)); +#504093 = ORIENTED_EDGE('',*,*,#504094,.T.); +#504094 = EDGE_CURVE('',#504095,#504095,#504097,.T.); +#504095 = VERTEX_POINT('',#504096); +#504096 = CARTESIAN_POINT('',(138.,-149.96,0.)); +#504097 = CIRCLE('',#504098,0.46); +#504098 = AXIS2_PLACEMENT_3D('',#504099,#504100,#504101); +#504099 = CARTESIAN_POINT('',(138.,-149.5,0.)); +#504100 = DIRECTION('',(-0.,0.,-1.)); +#504101 = DIRECTION('',(-0.,-1.,0.)); +#504102 = FACE_BOUND('',#504103,.F.); +#504103 = EDGE_LOOP('',(#504104)); +#504104 = ORIENTED_EDGE('',*,*,#504105,.T.); +#504105 = EDGE_CURVE('',#504106,#504106,#504108,.T.); +#504106 = VERTEX_POINT('',#504107); +#504107 = CARTESIAN_POINT('',(140.,-149.96,0.)); +#504108 = CIRCLE('',#504109,0.46); +#504109 = AXIS2_PLACEMENT_3D('',#504110,#504111,#504112); +#504110 = CARTESIAN_POINT('',(140.,-149.5,0.)); +#504111 = DIRECTION('',(-0.,0.,-1.)); +#504112 = DIRECTION('',(-0.,-1.,0.)); +#504113 = FACE_BOUND('',#504114,.F.); +#504114 = EDGE_LOOP('',(#504115,#504126,#504134,#504143)); +#504115 = ORIENTED_EDGE('',*,*,#504116,.T.); +#504116 = EDGE_CURVE('',#504117,#504119,#504121,.T.); +#504117 = VERTEX_POINT('',#504118); +#504118 = CARTESIAN_POINT('',(142.12,-158.45,0.)); +#504119 = VERTEX_POINT('',#504120); +#504120 = CARTESIAN_POINT('',(141.52,-158.45,0.)); +#504121 = CIRCLE('',#504122,0.3); +#504122 = AXIS2_PLACEMENT_3D('',#504123,#504124,#504125); +#504123 = CARTESIAN_POINT('',(141.82,-158.45,0.)); +#504124 = DIRECTION('',(-0.,0.,-1.)); +#504125 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#504126 = ORIENTED_EDGE('',*,*,#504127,.T.); +#504127 = EDGE_CURVE('',#504119,#504128,#504130,.T.); +#504128 = VERTEX_POINT('',#504129); +#504129 = CARTESIAN_POINT('',(141.52,-157.85,0.)); +#504130 = LINE('',#504131,#504132); +#504131 = CARTESIAN_POINT('',(141.52,-78.925,0.)); +#504132 = VECTOR('',#504133,1.); +#504133 = DIRECTION('',(-0.,1.,0.)); +#504134 = ORIENTED_EDGE('',*,*,#504135,.T.); +#504135 = EDGE_CURVE('',#504128,#504136,#504138,.T.); +#504136 = VERTEX_POINT('',#504137); +#504137 = CARTESIAN_POINT('',(142.12,-157.85,0.)); +#504138 = CIRCLE('',#504139,0.3); +#504139 = AXIS2_PLACEMENT_3D('',#504140,#504141,#504142); +#504140 = CARTESIAN_POINT('',(141.82,-157.85,0.)); +#504141 = DIRECTION('',(0.,-0.,-1.)); +#504142 = DIRECTION('',(1.,0.,-0.)); +#504143 = ORIENTED_EDGE('',*,*,#504144,.T.); +#504144 = EDGE_CURVE('',#504136,#504117,#504145,.T.); +#504145 = LINE('',#504146,#504147); +#504146 = CARTESIAN_POINT('',(142.12,-79.225,0.)); +#504147 = VECTOR('',#504148,1.); +#504148 = DIRECTION('',(0.,-1.,0.)); +#504149 = FACE_BOUND('',#504150,.F.); +#504150 = EDGE_LOOP('',(#504151,#504162,#504170,#504179)); +#504151 = ORIENTED_EDGE('',*,*,#504152,.T.); +#504152 = EDGE_CURVE('',#504153,#504155,#504157,.T.); +#504153 = VERTEX_POINT('',#504154); +#504154 = CARTESIAN_POINT('',(142.12,-154.52,0.)); +#504155 = VERTEX_POINT('',#504156); +#504156 = CARTESIAN_POINT('',(141.52,-154.52,0.)); +#504157 = CIRCLE('',#504158,0.3); +#504158 = AXIS2_PLACEMENT_3D('',#504159,#504160,#504161); +#504159 = CARTESIAN_POINT('',(141.82,-154.52,0.)); +#504160 = DIRECTION('',(-0.,0.,-1.)); +#504161 = DIRECTION('',(-1.,0.,0.)); +#504162 = ORIENTED_EDGE('',*,*,#504163,.T.); +#504163 = EDGE_CURVE('',#504155,#504164,#504166,.T.); +#504164 = VERTEX_POINT('',#504165); +#504165 = CARTESIAN_POINT('',(141.52,-153.42,0.)); +#504166 = LINE('',#504167,#504168); +#504167 = CARTESIAN_POINT('',(141.52,-76.71,0.)); +#504168 = VECTOR('',#504169,1.); +#504169 = DIRECTION('',(-0.,1.,0.)); +#504170 = ORIENTED_EDGE('',*,*,#504171,.T.); +#504171 = EDGE_CURVE('',#504164,#504172,#504174,.T.); +#504172 = VERTEX_POINT('',#504173); +#504173 = CARTESIAN_POINT('',(142.12,-153.42,0.)); +#504174 = CIRCLE('',#504175,0.3); +#504175 = AXIS2_PLACEMENT_3D('',#504176,#504177,#504178); +#504176 = CARTESIAN_POINT('',(141.82,-153.42,0.)); +#504177 = DIRECTION('',(0.,-0.,-1.)); +#504178 = DIRECTION('',(1.,0.,-0.)); +#504179 = ORIENTED_EDGE('',*,*,#504180,.T.); +#504180 = EDGE_CURVE('',#504172,#504153,#504181,.T.); +#504181 = LINE('',#504182,#504183); +#504182 = CARTESIAN_POINT('',(142.12,-77.26,0.)); +#504183 = VECTOR('',#504184,1.); +#504184 = DIRECTION('',(0.,-1.,0.)); +#504185 = FACE_BOUND('',#504186,.F.); +#504186 = EDGE_LOOP('',(#504187)); +#504187 = ORIENTED_EDGE('',*,*,#504188,.T.); +#504188 = EDGE_CURVE('',#504189,#504189,#504191,.T.); +#504189 = VERTEX_POINT('',#504190); +#504190 = CARTESIAN_POINT('',(142.,-149.96,0.)); +#504191 = CIRCLE('',#504192,0.46); +#504192 = AXIS2_PLACEMENT_3D('',#504193,#504194,#504195); +#504193 = CARTESIAN_POINT('',(142.,-149.5,0.)); +#504194 = DIRECTION('',(-0.,0.,-1.)); +#504195 = DIRECTION('',(-0.,-1.,0.)); +#504196 = FACE_BOUND('',#504197,.F.); +#504197 = EDGE_LOOP('',(#504198)); +#504198 = ORIENTED_EDGE('',*,*,#504199,.T.); +#504199 = EDGE_CURVE('',#504200,#504200,#504202,.T.); +#504200 = VERTEX_POINT('',#504201); +#504201 = CARTESIAN_POINT('',(152.,-157.85,0.)); +#504202 = CIRCLE('',#504203,1.35); +#504203 = AXIS2_PLACEMENT_3D('',#504204,#504205,#504206); +#504204 = CARTESIAN_POINT('',(152.,-156.5,0.)); +#504205 = DIRECTION('',(-0.,0.,-1.)); +#504206 = DIRECTION('',(-0.,-1.,0.)); +#504207 = FACE_BOUND('',#504208,.F.); +#504208 = EDGE_LOOP('',(#504209)); +#504209 = ORIENTED_EDGE('',*,*,#504210,.T.); +#504210 = EDGE_CURVE('',#504211,#504211,#504213,.T.); +#504211 = VERTEX_POINT('',#504212); +#504212 = CARTESIAN_POINT('',(138.,-127.96,0.)); +#504213 = CIRCLE('',#504214,0.46); +#504214 = AXIS2_PLACEMENT_3D('',#504215,#504216,#504217); +#504215 = CARTESIAN_POINT('',(138.,-127.5,0.)); +#504216 = DIRECTION('',(-0.,0.,-1.)); +#504217 = DIRECTION('',(-0.,-1.,0.)); +#504218 = FACE_BOUND('',#504219,.F.); +#504219 = EDGE_LOOP('',(#504220)); +#504220 = ORIENTED_EDGE('',*,*,#504221,.T.); +#504221 = EDGE_CURVE('',#504222,#504222,#504224,.T.); +#504222 = VERTEX_POINT('',#504223); +#504223 = CARTESIAN_POINT('',(140.,-127.96,0.)); +#504224 = CIRCLE('',#504225,0.46); +#504225 = AXIS2_PLACEMENT_3D('',#504226,#504227,#504228); +#504226 = CARTESIAN_POINT('',(140.,-127.5,0.)); +#504227 = DIRECTION('',(-0.,0.,-1.)); +#504228 = DIRECTION('',(-0.,-1.,0.)); +#504229 = FACE_BOUND('',#504230,.F.); +#504230 = EDGE_LOOP('',(#504231)); +#504231 = ORIENTED_EDGE('',*,*,#504232,.T.); +#504232 = EDGE_CURVE('',#504233,#504233,#504235,.T.); +#504233 = VERTEX_POINT('',#504234); +#504234 = CARTESIAN_POINT('',(142.,-127.96,0.)); +#504235 = CIRCLE('',#504236,0.46); +#504236 = AXIS2_PLACEMENT_3D('',#504237,#504238,#504239); +#504237 = CARTESIAN_POINT('',(142.,-127.5,0.)); +#504238 = DIRECTION('',(-0.,0.,-1.)); +#504239 = DIRECTION('',(-0.,-1.,0.)); +#504240 = FACE_BOUND('',#504241,.F.); +#504241 = EDGE_LOOP('',(#504242)); +#504242 = ORIENTED_EDGE('',*,*,#504243,.T.); +#504243 = EDGE_CURVE('',#504244,#504244,#504246,.T.); +#504244 = VERTEX_POINT('',#504245); +#504245 = CARTESIAN_POINT('',(121.75,-103.1,0.)); +#504246 = CIRCLE('',#504247,0.45); +#504247 = AXIS2_PLACEMENT_3D('',#504248,#504249,#504250); +#504248 = CARTESIAN_POINT('',(121.75,-102.65,0.)); +#504249 = DIRECTION('',(-0.,0.,-1.)); +#504250 = DIRECTION('',(-0.,-1.,0.)); +#504251 = FACE_BOUND('',#504252,.F.); +#504252 = EDGE_LOOP('',(#504253)); +#504253 = ORIENTED_EDGE('',*,*,#504254,.T.); +#504254 = EDGE_CURVE('',#504255,#504255,#504257,.T.); +#504255 = VERTEX_POINT('',#504256); +#504256 = CARTESIAN_POINT('',(121.75,-98.85,0.)); +#504257 = CIRCLE('',#504258,0.45); +#504258 = AXIS2_PLACEMENT_3D('',#504259,#504260,#504261); +#504259 = CARTESIAN_POINT('',(121.75,-98.4,0.)); +#504260 = DIRECTION('',(-0.,0.,-1.)); +#504261 = DIRECTION('',(-0.,-1.,0.)); +#504262 = FACE_BOUND('',#504263,.F.); +#504263 = EDGE_LOOP('',(#504264)); +#504264 = ORIENTED_EDGE('',*,*,#504265,.T.); +#504265 = EDGE_CURVE('',#504266,#504266,#504268,.T.); +#504266 = VERTEX_POINT('',#504267); +#504267 = CARTESIAN_POINT('',(121.75,-93.075,0.)); +#504268 = CIRCLE('',#504269,0.45); +#504269 = AXIS2_PLACEMENT_3D('',#504270,#504271,#504272); +#504270 = CARTESIAN_POINT('',(121.75,-92.625,0.)); +#504271 = DIRECTION('',(-0.,0.,-1.)); +#504272 = DIRECTION('',(-0.,-1.,0.)); +#504273 = FACE_BOUND('',#504274,.F.); +#504274 = EDGE_LOOP('',(#504275)); +#504275 = ORIENTED_EDGE('',*,*,#504276,.T.); +#504276 = EDGE_CURVE('',#504277,#504277,#504279,.T.); +#504277 = VERTEX_POINT('',#504278); +#504278 = CARTESIAN_POINT('',(121.75,-88.825,0.)); +#504279 = CIRCLE('',#504280,0.45); +#504280 = AXIS2_PLACEMENT_3D('',#504281,#504282,#504283); +#504281 = CARTESIAN_POINT('',(121.75,-88.375,0.)); +#504282 = DIRECTION('',(-0.,0.,-1.)); +#504283 = DIRECTION('',(-0.,-1.,0.)); +#504284 = FACE_BOUND('',#504285,.F.); +#504285 = EDGE_LOOP('',(#504286)); +#504286 = ORIENTED_EDGE('',*,*,#504287,.T.); +#504287 = EDGE_CURVE('',#504288,#504288,#504290,.T.); +#504288 = VERTEX_POINT('',#504289); +#504289 = CARTESIAN_POINT('',(131.175,-101.025,0.)); +#504290 = CIRCLE('',#504291,0.775); +#504291 = AXIS2_PLACEMENT_3D('',#504292,#504293,#504294); +#504292 = CARTESIAN_POINT('',(131.175,-100.25,0.)); +#504293 = DIRECTION('',(-0.,0.,-1.)); +#504294 = DIRECTION('',(-0.,-1.,0.)); +#504295 = FACE_BOUND('',#504296,.F.); +#504296 = EDGE_LOOP('',(#504297)); +#504297 = ORIENTED_EDGE('',*,*,#504298,.T.); +#504298 = EDGE_CURVE('',#504299,#504299,#504301,.T.); +#504299 = VERTEX_POINT('',#504300); +#504300 = CARTESIAN_POINT('',(134.25,-106.125,0.)); +#504301 = CIRCLE('',#504302,0.625); +#504302 = AXIS2_PLACEMENT_3D('',#504303,#504304,#504305); +#504303 = CARTESIAN_POINT('',(134.25,-105.5,0.)); +#504304 = DIRECTION('',(-0.,0.,-1.)); +#504305 = DIRECTION('',(-0.,-1.,0.)); +#504306 = FACE_BOUND('',#504307,.F.); +#504307 = EDGE_LOOP('',(#504308)); +#504308 = ORIENTED_EDGE('',*,*,#504309,.T.); +#504309 = EDGE_CURVE('',#504310,#504310,#504312,.T.); +#504310 = VERTEX_POINT('',#504311); +#504311 = CARTESIAN_POINT('',(134.25,-101.625,0.)); +#504312 = CIRCLE('',#504313,0.625); +#504313 = AXIS2_PLACEMENT_3D('',#504314,#504315,#504316); +#504314 = CARTESIAN_POINT('',(134.25,-101.,0.)); +#504315 = DIRECTION('',(-0.,0.,-1.)); +#504316 = DIRECTION('',(-0.,-1.,0.)); +#504317 = FACE_BOUND('',#504318,.F.); +#504318 = EDGE_LOOP('',(#504319)); +#504319 = ORIENTED_EDGE('',*,*,#504320,.T.); +#504320 = EDGE_CURVE('',#504321,#504321,#504323,.T.); +#504321 = VERTEX_POINT('',#504322); +#504322 = CARTESIAN_POINT('',(131.175,-91.025,0.)); +#504323 = CIRCLE('',#504324,0.775); +#504324 = AXIS2_PLACEMENT_3D('',#504325,#504326,#504327); +#504325 = CARTESIAN_POINT('',(131.175,-90.25,0.)); +#504326 = DIRECTION('',(-0.,0.,-1.)); +#504327 = DIRECTION('',(-0.,-1.,0.)); +#504328 = FACE_BOUND('',#504329,.F.); +#504329 = EDGE_LOOP('',(#504330)); +#504330 = ORIENTED_EDGE('',*,*,#504331,.T.); +#504331 = EDGE_CURVE('',#504332,#504332,#504334,.T.); +#504332 = VERTEX_POINT('',#504333); +#504333 = CARTESIAN_POINT('',(135.,-87.045,0.)); +#504334 = CIRCLE('',#504335,0.525); +#504335 = AXIS2_PLACEMENT_3D('',#504336,#504337,#504338); +#504336 = CARTESIAN_POINT('',(135.,-86.52,0.)); +#504337 = DIRECTION('',(-0.,0.,-1.)); +#504338 = DIRECTION('',(-0.,-1.,0.)); +#504339 = FACE_BOUND('',#504340,.F.); +#504340 = EDGE_LOOP('',(#504341)); +#504341 = ORIENTED_EDGE('',*,*,#504342,.T.); +#504342 = EDGE_CURVE('',#504343,#504343,#504345,.T.); +#504343 = VERTEX_POINT('',#504344); +#504344 = CARTESIAN_POINT('',(137.5,-87.045,0.)); +#504345 = CIRCLE('',#504346,0.525); +#504346 = AXIS2_PLACEMENT_3D('',#504347,#504348,#504349); +#504347 = CARTESIAN_POINT('',(137.5,-86.52,0.)); +#504348 = DIRECTION('',(-0.,0.,-1.)); +#504349 = DIRECTION('',(-0.,-1.,0.)); +#504350 = FACE_BOUND('',#504351,.F.); +#504351 = EDGE_LOOP('',(#504352)); +#504352 = ORIENTED_EDGE('',*,*,#504353,.T.); +#504353 = EDGE_CURVE('',#504354,#504354,#504356,.T.); +#504354 = VERTEX_POINT('',#504355); +#504355 = CARTESIAN_POINT('',(123.3,-70.55,0.)); +#504356 = CIRCLE('',#504357,1.35); +#504357 = AXIS2_PLACEMENT_3D('',#504358,#504359,#504360); +#504358 = CARTESIAN_POINT('',(123.3,-69.2,0.)); +#504359 = DIRECTION('',(-0.,0.,-1.)); +#504360 = DIRECTION('',(-1.05265590483E-14,-1.,0.)); +#504361 = FACE_BOUND('',#504362,.F.); +#504362 = EDGE_LOOP('',(#504363)); +#504363 = ORIENTED_EDGE('',*,*,#504364,.T.); +#504364 = EDGE_CURVE('',#504365,#504365,#504367,.T.); +#504365 = VERTEX_POINT('',#504366); +#504366 = CARTESIAN_POINT('',(121.525,-62.2,0.)); +#504367 = CIRCLE('',#504368,0.45); +#504368 = AXIS2_PLACEMENT_3D('',#504369,#504370,#504371); +#504369 = CARTESIAN_POINT('',(121.525,-61.75,0.)); +#504370 = DIRECTION('',(-0.,0.,-1.)); +#504371 = DIRECTION('',(-0.,-1.,0.)); +#504372 = FACE_BOUND('',#504373,.F.); +#504373 = EDGE_LOOP('',(#504374)); +#504374 = ORIENTED_EDGE('',*,*,#504375,.T.); +#504375 = EDGE_CURVE('',#504376,#504376,#504378,.T.); +#504376 = VERTEX_POINT('',#504377); +#504377 = CARTESIAN_POINT('',(125.775,-62.2,0.)); +#504378 = CIRCLE('',#504379,0.45); +#504379 = AXIS2_PLACEMENT_3D('',#504380,#504381,#504382); +#504380 = CARTESIAN_POINT('',(125.775,-61.75,0.)); +#504381 = DIRECTION('',(-0.,0.,-1.)); +#504382 = DIRECTION('',(-0.,-1.,0.)); +#504383 = FACE_BOUND('',#504384,.F.); +#504384 = EDGE_LOOP('',(#504385)); +#504385 = ORIENTED_EDGE('',*,*,#504386,.T.); +#504386 = EDGE_CURVE('',#504387,#504387,#504389,.T.); +#504387 = VERTEX_POINT('',#504388); +#504388 = CARTESIAN_POINT('',(140.75,-106.125,0.)); +#504389 = CIRCLE('',#504390,0.625); +#504390 = AXIS2_PLACEMENT_3D('',#504391,#504392,#504393); +#504391 = CARTESIAN_POINT('',(140.75,-105.5,0.)); +#504392 = DIRECTION('',(-0.,0.,-1.)); +#504393 = DIRECTION('',(-0.,-1.,0.)); +#504394 = FACE_BOUND('',#504395,.F.); +#504395 = EDGE_LOOP('',(#504396)); +#504396 = ORIENTED_EDGE('',*,*,#504397,.T.); +#504397 = EDGE_CURVE('',#504398,#504398,#504400,.T.); +#504398 = VERTEX_POINT('',#504399); +#504399 = CARTESIAN_POINT('',(140.75,-101.625,0.)); +#504400 = CIRCLE('',#504401,0.625); +#504401 = AXIS2_PLACEMENT_3D('',#504402,#504403,#504404); +#504402 = CARTESIAN_POINT('',(140.75,-101.,0.)); +#504403 = DIRECTION('',(-0.,0.,-1.)); +#504404 = DIRECTION('',(-0.,-1.,0.)); +#504405 = FACE_BOUND('',#504406,.F.); +#504406 = EDGE_LOOP('',(#504407)); +#504407 = ORIENTED_EDGE('',*,*,#504408,.T.); +#504408 = EDGE_CURVE('',#504409,#504409,#504411,.T.); +#504409 = VERTEX_POINT('',#504410); +#504410 = CARTESIAN_POINT('',(143.825,-101.025,0.)); +#504411 = CIRCLE('',#504412,0.775); +#504412 = AXIS2_PLACEMENT_3D('',#504413,#504414,#504415); +#504413 = CARTESIAN_POINT('',(143.825,-100.25,0.)); +#504414 = DIRECTION('',(-0.,0.,-1.)); +#504415 = DIRECTION('',(-0.,-1.,0.)); +#504416 = FACE_BOUND('',#504417,.F.); +#504417 = EDGE_LOOP('',(#504418)); +#504418 = ORIENTED_EDGE('',*,*,#504419,.T.); +#504419 = EDGE_CURVE('',#504420,#504420,#504422,.T.); +#504420 = VERTEX_POINT('',#504421); +#504421 = CARTESIAN_POINT('',(140.,-87.045,0.)); +#504422 = CIRCLE('',#504423,0.525); +#504423 = AXIS2_PLACEMENT_3D('',#504424,#504425,#504426); +#504424 = CARTESIAN_POINT('',(140.,-86.52,0.)); +#504425 = DIRECTION('',(-0.,0.,-1.)); +#504426 = DIRECTION('',(-0.,-1.,0.)); +#504427 = FACE_BOUND('',#504428,.F.); +#504428 = EDGE_LOOP('',(#504429)); +#504429 = ORIENTED_EDGE('',*,*,#504430,.T.); +#504430 = EDGE_CURVE('',#504431,#504431,#504433,.T.); +#504431 = VERTEX_POINT('',#504432); +#504432 = CARTESIAN_POINT('',(143.825,-91.025,0.)); +#504433 = CIRCLE('',#504434,0.775); +#504434 = AXIS2_PLACEMENT_3D('',#504435,#504436,#504437); +#504435 = CARTESIAN_POINT('',(143.825,-90.25,0.)); +#504436 = DIRECTION('',(-0.,0.,-1.)); +#504437 = DIRECTION('',(-0.,-1.,0.)); +#504438 = FACE_BOUND('',#504439,.F.); +#504439 = EDGE_LOOP('',(#504440)); +#504440 = ORIENTED_EDGE('',*,*,#504441,.T.); +#504441 = EDGE_CURVE('',#504442,#504442,#504444,.T.); +#504442 = VERTEX_POINT('',#504443); +#504443 = CARTESIAN_POINT('',(153.2,-103.1,0.)); +#504444 = CIRCLE('',#504445,0.45); +#504445 = AXIS2_PLACEMENT_3D('',#504446,#504447,#504448); +#504446 = CARTESIAN_POINT('',(153.2,-102.65,0.)); +#504447 = DIRECTION('',(-0.,0.,-1.)); +#504448 = DIRECTION('',(-0.,-1.,0.)); +#504449 = FACE_BOUND('',#504450,.F.); +#504450 = EDGE_LOOP('',(#504451)); +#504451 = ORIENTED_EDGE('',*,*,#504452,.T.); +#504452 = EDGE_CURVE('',#504453,#504453,#504455,.T.); +#504453 = VERTEX_POINT('',#504454); +#504454 = CARTESIAN_POINT('',(153.2,-98.85,0.)); +#504455 = CIRCLE('',#504456,0.45); +#504456 = AXIS2_PLACEMENT_3D('',#504457,#504458,#504459); +#504457 = CARTESIAN_POINT('',(153.2,-98.4,0.)); +#504458 = DIRECTION('',(-0.,0.,-1.)); +#504459 = DIRECTION('',(-0.,-1.,0.)); +#504460 = FACE_BOUND('',#504461,.F.); +#504461 = EDGE_LOOP('',(#504462)); +#504462 = ORIENTED_EDGE('',*,*,#504463,.T.); +#504463 = EDGE_CURVE('',#504464,#504464,#504466,.T.); +#504464 = VERTEX_POINT('',#504465); +#504465 = CARTESIAN_POINT('',(146.23,-98.275,0.)); +#504466 = CIRCLE('',#504467,0.525); +#504467 = AXIS2_PLACEMENT_3D('',#504468,#504469,#504470); +#504468 = CARTESIAN_POINT('',(146.23,-97.75,0.)); +#504469 = DIRECTION('',(-0.,0.,-1.)); +#504470 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#504471 = FACE_BOUND('',#504472,.F.); +#504472 = EDGE_LOOP('',(#504473)); +#504473 = ORIENTED_EDGE('',*,*,#504474,.T.); +#504474 = EDGE_CURVE('',#504475,#504475,#504477,.T.); +#504475 = VERTEX_POINT('',#504476); +#504476 = CARTESIAN_POINT('',(146.23,-95.775,0.)); +#504477 = CIRCLE('',#504478,0.525); +#504478 = AXIS2_PLACEMENT_3D('',#504479,#504480,#504481); +#504479 = CARTESIAN_POINT('',(146.23,-95.25,0.)); +#504480 = DIRECTION('',(-0.,0.,-1.)); +#504481 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#504482 = FACE_BOUND('',#504483,.F.); +#504483 = EDGE_LOOP('',(#504484)); +#504484 = ORIENTED_EDGE('',*,*,#504485,.T.); +#504485 = EDGE_CURVE('',#504486,#504486,#504488,.T.); +#504486 = VERTEX_POINT('',#504487); +#504487 = CARTESIAN_POINT('',(146.23,-93.275,0.)); +#504488 = CIRCLE('',#504489,0.525); +#504489 = AXIS2_PLACEMENT_3D('',#504490,#504491,#504492); +#504490 = CARTESIAN_POINT('',(146.23,-92.75,0.)); +#504491 = DIRECTION('',(-0.,0.,-1.)); +#504492 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#504493 = FACE_BOUND('',#504494,.F.); +#504494 = EDGE_LOOP('',(#504495)); +#504495 = ORIENTED_EDGE('',*,*,#504496,.T.); +#504496 = EDGE_CURVE('',#504497,#504497,#504499,.T.); +#504497 = VERTEX_POINT('',#504498); +#504498 = CARTESIAN_POINT('',(153.2,-93.075,0.)); +#504499 = CIRCLE('',#504500,0.45); +#504500 = AXIS2_PLACEMENT_3D('',#504501,#504502,#504503); +#504501 = CARTESIAN_POINT('',(153.2,-92.625,0.)); +#504502 = DIRECTION('',(-0.,0.,-1.)); +#504503 = DIRECTION('',(-0.,-1.,0.)); +#504504 = FACE_BOUND('',#504505,.F.); +#504505 = EDGE_LOOP('',(#504506)); +#504506 = ORIENTED_EDGE('',*,*,#504507,.T.); +#504507 = EDGE_CURVE('',#504508,#504508,#504510,.T.); +#504508 = VERTEX_POINT('',#504509); +#504509 = CARTESIAN_POINT('',(153.2,-88.825,0.)); +#504510 = CIRCLE('',#504511,0.45); +#504511 = AXIS2_PLACEMENT_3D('',#504512,#504513,#504514); +#504512 = CARTESIAN_POINT('',(153.2,-88.375,0.)); +#504513 = DIRECTION('',(-0.,0.,-1.)); +#504514 = DIRECTION('',(-0.,-1.,0.)); +#504515 = FACE_BOUND('',#504516,.F.); +#504516 = EDGE_LOOP('',(#504517)); +#504517 = ORIENTED_EDGE('',*,*,#504518,.T.); +#504518 = EDGE_CURVE('',#504519,#504519,#504521,.T.); +#504519 = VERTEX_POINT('',#504520); +#504520 = CARTESIAN_POINT('',(150.5,-77.875,0.)); +#504521 = CIRCLE('',#504522,0.375); +#504522 = AXIS2_PLACEMENT_3D('',#504523,#504524,#504525); +#504523 = CARTESIAN_POINT('',(150.5,-77.5,0.)); +#504524 = DIRECTION('',(-0.,0.,-1.)); +#504525 = DIRECTION('',(-0.,-1.,0.)); +#504526 = FACE_BOUND('',#504527,.F.); +#504527 = EDGE_LOOP('',(#504528)); +#504528 = ORIENTED_EDGE('',*,*,#504529,.T.); +#504529 = EDGE_CURVE('',#504530,#504530,#504532,.T.); +#504530 = VERTEX_POINT('',#504531); +#504531 = CARTESIAN_POINT('',(152.5,-77.875,0.)); +#504532 = CIRCLE('',#504533,0.375); +#504533 = AXIS2_PLACEMENT_3D('',#504534,#504535,#504536); +#504534 = CARTESIAN_POINT('',(152.5,-77.5,0.)); +#504535 = DIRECTION('',(-0.,0.,-1.)); +#504536 = DIRECTION('',(-0.,-1.,0.)); +#504537 = FACE_BOUND('',#504538,.F.); +#504538 = EDGE_LOOP('',(#504539)); +#504539 = ORIENTED_EDGE('',*,*,#504540,.T.); +#504540 = EDGE_CURVE('',#504541,#504541,#504543,.T.); +#504541 = VERTEX_POINT('',#504542); +#504542 = CARTESIAN_POINT('',(149.225,-62.2,0.)); +#504543 = CIRCLE('',#504544,0.45); +#504544 = AXIS2_PLACEMENT_3D('',#504545,#504546,#504547); +#504545 = CARTESIAN_POINT('',(149.225,-61.75,0.)); +#504546 = DIRECTION('',(-0.,0.,-1.)); +#504547 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#504548 = FACE_BOUND('',#504549,.F.); +#504549 = EDGE_LOOP('',(#504550)); +#504550 = ORIENTED_EDGE('',*,*,#504551,.T.); +#504551 = EDGE_CURVE('',#504552,#504552,#504554,.T.); +#504552 = VERTEX_POINT('',#504553); +#504553 = CARTESIAN_POINT('',(151.7,-70.55,0.)); +#504554 = CIRCLE('',#504555,1.35); +#504555 = AXIS2_PLACEMENT_3D('',#504556,#504557,#504558); +#504556 = CARTESIAN_POINT('',(151.7,-69.2,0.)); +#504557 = DIRECTION('',(-0.,0.,-1.)); +#504558 = DIRECTION('',(-0.,-1.,0.)); +#504559 = FACE_BOUND('',#504560,.F.); +#504560 = EDGE_LOOP('',(#504561)); +#504561 = ORIENTED_EDGE('',*,*,#504562,.T.); +#504562 = EDGE_CURVE('',#504563,#504563,#504565,.T.); +#504563 = VERTEX_POINT('',#504564); +#504564 = CARTESIAN_POINT('',(153.475,-62.2,0.)); +#504565 = CIRCLE('',#504566,0.45); +#504566 = AXIS2_PLACEMENT_3D('',#504567,#504568,#504569); +#504567 = CARTESIAN_POINT('',(153.475,-61.75,0.)); +#504568 = DIRECTION('',(-0.,0.,-1.)); +#504569 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#504570 = PLANE('',#504571); +#504571 = AXIS2_PLACEMENT_3D('',#504572,#504573,#504574); +#504572 = CARTESIAN_POINT('',(0.,0.,0.)); +#504573 = DIRECTION('',(0.,0.,1.)); +#504574 = DIRECTION('',(1.,0.,-0.)); +#504575 = ADVANCED_FACE('',(#504576,#504587,#504598,#504609,#504620, + #504631,#504642,#504653,#504689,#504725,#504736,#504747,#504758, + #504769,#504780,#504791,#504802,#504813,#504824,#504835,#504846, + #504857,#504868,#504879,#504890,#504901,#504912,#504948,#504984, + #504995,#505006,#505017,#505028,#505039,#505050,#505061,#505072, + #505083,#505094,#505105,#505116,#505127,#505138,#505149,#505160, + #505171,#505182,#505193,#505204,#505215,#505226,#505237,#505248, + #505259,#505270,#505281,#505292,#505303,#505314,#505325,#505336, + #505347,#505358),#505369,.T.); +#504576 = FACE_BOUND('',#504577,.T.); +#504577 = EDGE_LOOP('',(#504578,#504579,#504580,#504586)); +#504578 = ORIENTED_EDGE('',*,*,#503688,.F.); +#504579 = ORIENTED_EDGE('',*,*,#503728,.F.); +#504580 = ORIENTED_EDGE('',*,*,#504581,.F.); +#504581 = EDGE_CURVE('',#503751,#503721,#504582,.T.); +#504582 = LINE('',#504583,#504584); +#504583 = CARTESIAN_POINT('',(120.,-60.,1.51)); +#504584 = VECTOR('',#504585,1.); +#504585 = DIRECTION('',(1.,0.,0.)); +#504586 = ORIENTED_EDGE('',*,*,#503750,.F.); +#504587 = FACE_BOUND('',#504588,.T.); +#504588 = EDGE_LOOP('',(#504589)); +#504589 = ORIENTED_EDGE('',*,*,#504590,.T.); +#504590 = EDGE_CURVE('',#504591,#504591,#504593,.T.); +#504591 = VERTEX_POINT('',#504592); +#504592 = CARTESIAN_POINT('',(123.,-157.85,1.51)); +#504593 = CIRCLE('',#504594,1.35); +#504594 = AXIS2_PLACEMENT_3D('',#504595,#504596,#504597); +#504595 = CARTESIAN_POINT('',(123.,-156.5,1.51)); +#504596 = DIRECTION('',(-0.,0.,-1.)); +#504597 = DIRECTION('',(-0.,-1.,0.)); +#504598 = FACE_BOUND('',#504599,.T.); +#504599 = EDGE_LOOP('',(#504600)); +#504600 = ORIENTED_EDGE('',*,*,#504601,.T.); +#504601 = EDGE_CURVE('',#504602,#504602,#504604,.T.); +#504602 = VERTEX_POINT('',#504603); +#504603 = CARTESIAN_POINT('',(124.,-149.96,1.51)); +#504604 = CIRCLE('',#504605,0.46); +#504605 = AXIS2_PLACEMENT_3D('',#504606,#504607,#504608); +#504606 = CARTESIAN_POINT('',(124.,-149.5,1.51)); +#504607 = DIRECTION('',(-0.,0.,-1.)); +#504608 = DIRECTION('',(-0.,-1.,0.)); +#504609 = FACE_BOUND('',#504610,.T.); +#504610 = EDGE_LOOP('',(#504611)); +#504611 = ORIENTED_EDGE('',*,*,#504612,.T.); +#504612 = EDGE_CURVE('',#504613,#504613,#504615,.T.); +#504613 = VERTEX_POINT('',#504614); +#504614 = CARTESIAN_POINT('',(126.875,-158.4,1.51)); +#504615 = CIRCLE('',#504616,0.45); +#504616 = AXIS2_PLACEMENT_3D('',#504617,#504618,#504619); +#504617 = CARTESIAN_POINT('',(126.875,-157.95,1.51)); +#504618 = DIRECTION('',(-0.,0.,-1.)); +#504619 = DIRECTION('',(-0.,-1.,0.)); +#504620 = FACE_BOUND('',#504621,.T.); +#504621 = EDGE_LOOP('',(#504622)); +#504622 = ORIENTED_EDGE('',*,*,#504623,.T.); +#504623 = EDGE_CURVE('',#504624,#504624,#504626,.T.); +#504624 = VERTEX_POINT('',#504625); +#504625 = CARTESIAN_POINT('',(126.,-149.96,1.51)); +#504626 = CIRCLE('',#504627,0.46); +#504627 = AXIS2_PLACEMENT_3D('',#504628,#504629,#504630); +#504628 = CARTESIAN_POINT('',(126.,-149.5,1.51)); +#504629 = DIRECTION('',(-0.,0.,-1.)); +#504630 = DIRECTION('',(-0.,-1.,0.)); +#504631 = FACE_BOUND('',#504632,.T.); +#504632 = EDGE_LOOP('',(#504633)); +#504633 = ORIENTED_EDGE('',*,*,#504634,.T.); +#504634 = EDGE_CURVE('',#504635,#504635,#504637,.T.); +#504635 = VERTEX_POINT('',#504636); +#504636 = CARTESIAN_POINT('',(128.,-149.96,1.51)); +#504637 = CIRCLE('',#504638,0.46); +#504638 = AXIS2_PLACEMENT_3D('',#504639,#504640,#504641); +#504639 = CARTESIAN_POINT('',(128.,-149.5,1.51)); +#504640 = DIRECTION('',(-0.,0.,-1.)); +#504641 = DIRECTION('',(-0.,-1.,0.)); +#504642 = FACE_BOUND('',#504643,.T.); +#504643 = EDGE_LOOP('',(#504644)); +#504644 = ORIENTED_EDGE('',*,*,#504645,.T.); +#504645 = EDGE_CURVE('',#504646,#504646,#504648,.T.); +#504646 = VERTEX_POINT('',#504647); +#504647 = CARTESIAN_POINT('',(131.125,-158.4,1.51)); +#504648 = CIRCLE('',#504649,0.45); +#504649 = AXIS2_PLACEMENT_3D('',#504650,#504651,#504652); +#504650 = CARTESIAN_POINT('',(131.125,-157.95,1.51)); +#504651 = DIRECTION('',(-0.,0.,-1.)); +#504652 = DIRECTION('',(-0.,-1.,0.)); +#504653 = FACE_BOUND('',#504654,.T.); +#504654 = EDGE_LOOP('',(#504655,#504666,#504674,#504683)); +#504655 = ORIENTED_EDGE('',*,*,#504656,.T.); +#504656 = EDGE_CURVE('',#504657,#504659,#504661,.T.); +#504657 = VERTEX_POINT('',#504658); +#504658 = CARTESIAN_POINT('',(133.48,-158.45,1.51)); +#504659 = VERTEX_POINT('',#504660); +#504660 = CARTESIAN_POINT('',(132.88,-158.45,1.51)); +#504661 = CIRCLE('',#504662,0.3); +#504662 = AXIS2_PLACEMENT_3D('',#504663,#504664,#504665); +#504663 = CARTESIAN_POINT('',(133.18,-158.45,1.51)); +#504664 = DIRECTION('',(-0.,0.,-1.)); +#504665 = DIRECTION('',(-1.,9.473903143469E-14,0.)); +#504666 = ORIENTED_EDGE('',*,*,#504667,.T.); +#504667 = EDGE_CURVE('',#504659,#504668,#504670,.T.); +#504668 = VERTEX_POINT('',#504669); +#504669 = CARTESIAN_POINT('',(132.88,-157.85,1.51)); +#504670 = LINE('',#504671,#504672); +#504671 = CARTESIAN_POINT('',(132.88,-78.925,1.51)); +#504672 = VECTOR('',#504673,1.); +#504673 = DIRECTION('',(-0.,1.,0.)); +#504674 = ORIENTED_EDGE('',*,*,#504675,.T.); +#504675 = EDGE_CURVE('',#504668,#504676,#504678,.T.); +#504676 = VERTEX_POINT('',#504677); +#504677 = CARTESIAN_POINT('',(133.48,-157.85,1.51)); +#504678 = CIRCLE('',#504679,0.3); +#504679 = AXIS2_PLACEMENT_3D('',#504680,#504681,#504682); +#504680 = CARTESIAN_POINT('',(133.18,-157.85,1.51)); +#504681 = DIRECTION('',(0.,-0.,-1.)); +#504682 = DIRECTION('',(1.,0.,-0.)); +#504683 = ORIENTED_EDGE('',*,*,#504684,.T.); +#504684 = EDGE_CURVE('',#504676,#504657,#504685,.T.); +#504685 = LINE('',#504686,#504687); +#504686 = CARTESIAN_POINT('',(133.48,-79.225,1.51)); +#504687 = VECTOR('',#504688,1.); +#504688 = DIRECTION('',(0.,-1.,0.)); +#504689 = FACE_BOUND('',#504690,.T.); +#504690 = EDGE_LOOP('',(#504691,#504702,#504710,#504719)); +#504691 = ORIENTED_EDGE('',*,*,#504692,.T.); +#504692 = EDGE_CURVE('',#504693,#504695,#504697,.T.); +#504693 = VERTEX_POINT('',#504694); +#504694 = CARTESIAN_POINT('',(133.48,-154.52,1.51)); +#504695 = VERTEX_POINT('',#504696); +#504696 = CARTESIAN_POINT('',(132.88,-154.52,1.51)); +#504697 = CIRCLE('',#504698,0.3); +#504698 = AXIS2_PLACEMENT_3D('',#504699,#504700,#504701); +#504699 = CARTESIAN_POINT('',(133.18,-154.52,1.51)); +#504700 = DIRECTION('',(-0.,0.,-1.)); +#504701 = DIRECTION('',(-1.,0.,0.)); +#504702 = ORIENTED_EDGE('',*,*,#504703,.T.); +#504703 = EDGE_CURVE('',#504695,#504704,#504706,.T.); +#504704 = VERTEX_POINT('',#504705); +#504705 = CARTESIAN_POINT('',(132.88,-153.42,1.51)); +#504706 = LINE('',#504707,#504708); +#504707 = CARTESIAN_POINT('',(132.88,-76.71,1.51)); +#504708 = VECTOR('',#504709,1.); +#504709 = DIRECTION('',(-0.,1.,0.)); +#504710 = ORIENTED_EDGE('',*,*,#504711,.T.); +#504711 = EDGE_CURVE('',#504704,#504712,#504714,.T.); +#504712 = VERTEX_POINT('',#504713); +#504713 = CARTESIAN_POINT('',(133.48,-153.42,1.51)); +#504714 = CIRCLE('',#504715,0.3); +#504715 = AXIS2_PLACEMENT_3D('',#504716,#504717,#504718); +#504716 = CARTESIAN_POINT('',(133.18,-153.42,1.51)); +#504717 = DIRECTION('',(0.,-0.,-1.)); +#504718 = DIRECTION('',(1.,0.,-0.)); +#504719 = ORIENTED_EDGE('',*,*,#504720,.T.); +#504720 = EDGE_CURVE('',#504712,#504693,#504721,.T.); +#504721 = LINE('',#504722,#504723); +#504722 = CARTESIAN_POINT('',(133.48,-77.26,1.51)); +#504723 = VECTOR('',#504724,1.); +#504724 = DIRECTION('',(0.,-1.,0.)); +#504725 = FACE_BOUND('',#504726,.T.); +#504726 = EDGE_LOOP('',(#504727)); +#504727 = ORIENTED_EDGE('',*,*,#504728,.T.); +#504728 = EDGE_CURVE('',#504729,#504729,#504731,.T.); +#504729 = VERTEX_POINT('',#504730); +#504730 = CARTESIAN_POINT('',(130.,-149.96,1.51)); +#504731 = CIRCLE('',#504732,0.46); +#504732 = AXIS2_PLACEMENT_3D('',#504733,#504734,#504735); +#504733 = CARTESIAN_POINT('',(130.,-149.5,1.51)); +#504734 = DIRECTION('',(-0.,0.,-1.)); +#504735 = DIRECTION('',(-0.,-1.,0.)); +#504736 = FACE_BOUND('',#504737,.T.); +#504737 = EDGE_LOOP('',(#504738)); +#504738 = ORIENTED_EDGE('',*,*,#504739,.T.); +#504739 = EDGE_CURVE('',#504740,#504740,#504742,.T.); +#504740 = VERTEX_POINT('',#504741); +#504741 = CARTESIAN_POINT('',(132.,-149.96,1.51)); +#504742 = CIRCLE('',#504743,0.46); +#504743 = AXIS2_PLACEMENT_3D('',#504744,#504745,#504746); +#504744 = CARTESIAN_POINT('',(132.,-149.5,1.51)); +#504745 = DIRECTION('',(-0.,0.,-1.)); +#504746 = DIRECTION('',(-0.,-1.,0.)); +#504747 = FACE_BOUND('',#504748,.T.); +#504748 = EDGE_LOOP('',(#504749)); +#504749 = ORIENTED_EDGE('',*,*,#504750,.T.); +#504750 = EDGE_CURVE('',#504751,#504751,#504753,.T.); +#504751 = VERTEX_POINT('',#504752); +#504752 = CARTESIAN_POINT('',(134.61,-154.825,1.51)); +#504753 = CIRCLE('',#504754,0.325); +#504754 = AXIS2_PLACEMENT_3D('',#504755,#504756,#504757); +#504755 = CARTESIAN_POINT('',(134.61,-154.5,1.51)); +#504756 = DIRECTION('',(-0.,0.,-1.)); +#504757 = DIRECTION('',(-0.,-1.,0.)); +#504758 = FACE_BOUND('',#504759,.T.); +#504759 = EDGE_LOOP('',(#504760)); +#504760 = ORIENTED_EDGE('',*,*,#504761,.T.); +#504761 = EDGE_CURVE('',#504762,#504762,#504764,.T.); +#504762 = VERTEX_POINT('',#504763); +#504763 = CARTESIAN_POINT('',(134.,-149.96,1.51)); +#504764 = CIRCLE('',#504765,0.46); +#504765 = AXIS2_PLACEMENT_3D('',#504766,#504767,#504768); +#504766 = CARTESIAN_POINT('',(134.,-149.5,1.51)); +#504767 = DIRECTION('',(-0.,0.,-1.)); +#504768 = DIRECTION('',(-0.,-1.,0.)); +#504769 = FACE_BOUND('',#504770,.T.); +#504770 = EDGE_LOOP('',(#504771)); +#504771 = ORIENTED_EDGE('',*,*,#504772,.T.); +#504772 = EDGE_CURVE('',#504773,#504773,#504775,.T.); +#504773 = VERTEX_POINT('',#504774); +#504774 = CARTESIAN_POINT('',(136.,-149.96,1.51)); +#504775 = CIRCLE('',#504776,0.46); +#504776 = AXIS2_PLACEMENT_3D('',#504777,#504778,#504779); +#504777 = CARTESIAN_POINT('',(136.,-149.5,1.51)); +#504778 = DIRECTION('',(-0.,0.,-1.)); +#504779 = DIRECTION('',(-0.,-1.,0.)); +#504780 = FACE_BOUND('',#504781,.T.); +#504781 = EDGE_LOOP('',(#504782)); +#504782 = ORIENTED_EDGE('',*,*,#504783,.T.); +#504783 = EDGE_CURVE('',#504784,#504784,#504786,.T.); +#504784 = VERTEX_POINT('',#504785); +#504785 = CARTESIAN_POINT('',(124.,-127.96,1.51)); +#504786 = CIRCLE('',#504787,0.46); +#504787 = AXIS2_PLACEMENT_3D('',#504788,#504789,#504790); +#504788 = CARTESIAN_POINT('',(124.,-127.5,1.51)); +#504789 = DIRECTION('',(-0.,0.,-1.)); +#504790 = DIRECTION('',(-0.,-1.,0.)); +#504791 = FACE_BOUND('',#504792,.T.); +#504792 = EDGE_LOOP('',(#504793)); +#504793 = ORIENTED_EDGE('',*,*,#504794,.T.); +#504794 = EDGE_CURVE('',#504795,#504795,#504797,.T.); +#504795 = VERTEX_POINT('',#504796); +#504796 = CARTESIAN_POINT('',(126.,-127.96,1.51)); +#504797 = CIRCLE('',#504798,0.46); +#504798 = AXIS2_PLACEMENT_3D('',#504799,#504800,#504801); +#504799 = CARTESIAN_POINT('',(126.,-127.5,1.51)); +#504800 = DIRECTION('',(-0.,0.,-1.)); +#504801 = DIRECTION('',(-0.,-1.,0.)); +#504802 = FACE_BOUND('',#504803,.T.); +#504803 = EDGE_LOOP('',(#504804)); +#504804 = ORIENTED_EDGE('',*,*,#504805,.T.); +#504805 = EDGE_CURVE('',#504806,#504806,#504808,.T.); +#504806 = VERTEX_POINT('',#504807); +#504807 = CARTESIAN_POINT('',(128.,-127.96,1.51)); +#504808 = CIRCLE('',#504809,0.46); +#504809 = AXIS2_PLACEMENT_3D('',#504810,#504811,#504812); +#504810 = CARTESIAN_POINT('',(128.,-127.5,1.51)); +#504811 = DIRECTION('',(-0.,0.,-1.)); +#504812 = DIRECTION('',(-0.,-1.,0.)); +#504813 = FACE_BOUND('',#504814,.T.); +#504814 = EDGE_LOOP('',(#504815)); +#504815 = ORIENTED_EDGE('',*,*,#504816,.T.); +#504816 = EDGE_CURVE('',#504817,#504817,#504819,.T.); +#504817 = VERTEX_POINT('',#504818); +#504818 = CARTESIAN_POINT('',(130.,-127.96,1.51)); +#504819 = CIRCLE('',#504820,0.46); +#504820 = AXIS2_PLACEMENT_3D('',#504821,#504822,#504823); +#504821 = CARTESIAN_POINT('',(130.,-127.5,1.51)); +#504822 = DIRECTION('',(-0.,0.,-1.)); +#504823 = DIRECTION('',(-0.,-1.,0.)); +#504824 = FACE_BOUND('',#504825,.T.); +#504825 = EDGE_LOOP('',(#504826)); +#504826 = ORIENTED_EDGE('',*,*,#504827,.T.); +#504827 = EDGE_CURVE('',#504828,#504828,#504830,.T.); +#504828 = VERTEX_POINT('',#504829); +#504829 = CARTESIAN_POINT('',(132.,-127.96,1.51)); +#504830 = CIRCLE('',#504831,0.46); +#504831 = AXIS2_PLACEMENT_3D('',#504832,#504833,#504834); +#504832 = CARTESIAN_POINT('',(132.,-127.5,1.51)); +#504833 = DIRECTION('',(-0.,0.,-1.)); +#504834 = DIRECTION('',(-0.,-1.,0.)); +#504835 = FACE_BOUND('',#504836,.T.); +#504836 = EDGE_LOOP('',(#504837)); +#504837 = ORIENTED_EDGE('',*,*,#504838,.T.); +#504838 = EDGE_CURVE('',#504839,#504839,#504841,.T.); +#504839 = VERTEX_POINT('',#504840); +#504840 = CARTESIAN_POINT('',(134.,-127.96,1.51)); +#504841 = CIRCLE('',#504842,0.46); +#504842 = AXIS2_PLACEMENT_3D('',#504843,#504844,#504845); +#504843 = CARTESIAN_POINT('',(134.,-127.5,1.51)); +#504844 = DIRECTION('',(-0.,0.,-1.)); +#504845 = DIRECTION('',(-0.,-1.,0.)); +#504846 = FACE_BOUND('',#504847,.T.); +#504847 = EDGE_LOOP('',(#504848)); +#504848 = ORIENTED_EDGE('',*,*,#504849,.T.); +#504849 = EDGE_CURVE('',#504850,#504850,#504852,.T.); +#504850 = VERTEX_POINT('',#504851); +#504851 = CARTESIAN_POINT('',(136.,-127.96,1.51)); +#504852 = CIRCLE('',#504853,0.46); +#504853 = AXIS2_PLACEMENT_3D('',#504854,#504855,#504856); +#504854 = CARTESIAN_POINT('',(136.,-127.5,1.51)); +#504855 = DIRECTION('',(-0.,0.,-1.)); +#504856 = DIRECTION('',(-0.,-1.,0.)); +#504857 = FACE_BOUND('',#504858,.T.); +#504858 = EDGE_LOOP('',(#504859)); +#504859 = ORIENTED_EDGE('',*,*,#504860,.T.); +#504860 = EDGE_CURVE('',#504861,#504861,#504863,.T.); +#504861 = VERTEX_POINT('',#504862); +#504862 = CARTESIAN_POINT('',(133.,-119.6,1.51)); +#504863 = CIRCLE('',#504864,1.E-01); +#504864 = AXIS2_PLACEMENT_3D('',#504865,#504866,#504867); +#504865 = CARTESIAN_POINT('',(133.,-119.5,1.51)); +#504866 = DIRECTION('',(-0.,0.,-1.)); +#504867 = DIRECTION('',(-0.,-1.,0.)); +#504868 = FACE_BOUND('',#504869,.T.); +#504869 = EDGE_LOOP('',(#504870)); +#504870 = ORIENTED_EDGE('',*,*,#504871,.T.); +#504871 = EDGE_CURVE('',#504872,#504872,#504874,.T.); +#504872 = VERTEX_POINT('',#504873); +#504873 = CARTESIAN_POINT('',(133.,-118.6,1.51)); +#504874 = CIRCLE('',#504875,1.E-01); +#504875 = AXIS2_PLACEMENT_3D('',#504876,#504877,#504878); +#504876 = CARTESIAN_POINT('',(133.,-118.5,1.51)); +#504877 = DIRECTION('',(-0.,0.,-1.)); +#504878 = DIRECTION('',(-0.,-1.,0.)); +#504879 = FACE_BOUND('',#504880,.T.); +#504880 = EDGE_LOOP('',(#504881)); +#504881 = ORIENTED_EDGE('',*,*,#504882,.T.); +#504882 = EDGE_CURVE('',#504883,#504883,#504885,.T.); +#504883 = VERTEX_POINT('',#504884); +#504884 = CARTESIAN_POINT('',(140.39,-154.825,1.51)); +#504885 = CIRCLE('',#504886,0.325); +#504886 = AXIS2_PLACEMENT_3D('',#504887,#504888,#504889); +#504887 = CARTESIAN_POINT('',(140.39,-154.5,1.51)); +#504888 = DIRECTION('',(-0.,0.,-1.)); +#504889 = DIRECTION('',(-0.,-1.,0.)); +#504890 = FACE_BOUND('',#504891,.T.); +#504891 = EDGE_LOOP('',(#504892)); +#504892 = ORIENTED_EDGE('',*,*,#504893,.T.); +#504893 = EDGE_CURVE('',#504894,#504894,#504896,.T.); +#504894 = VERTEX_POINT('',#504895); +#504895 = CARTESIAN_POINT('',(138.,-149.96,1.51)); +#504896 = CIRCLE('',#504897,0.46); +#504897 = AXIS2_PLACEMENT_3D('',#504898,#504899,#504900); +#504898 = CARTESIAN_POINT('',(138.,-149.5,1.51)); +#504899 = DIRECTION('',(-0.,0.,-1.)); +#504900 = DIRECTION('',(-0.,-1.,0.)); +#504901 = FACE_BOUND('',#504902,.T.); +#504902 = EDGE_LOOP('',(#504903)); +#504903 = ORIENTED_EDGE('',*,*,#504904,.T.); +#504904 = EDGE_CURVE('',#504905,#504905,#504907,.T.); +#504905 = VERTEX_POINT('',#504906); +#504906 = CARTESIAN_POINT('',(140.,-149.96,1.51)); +#504907 = CIRCLE('',#504908,0.46); +#504908 = AXIS2_PLACEMENT_3D('',#504909,#504910,#504911); +#504909 = CARTESIAN_POINT('',(140.,-149.5,1.51)); +#504910 = DIRECTION('',(-0.,0.,-1.)); +#504911 = DIRECTION('',(-0.,-1.,0.)); +#504912 = FACE_BOUND('',#504913,.T.); +#504913 = EDGE_LOOP('',(#504914,#504925,#504933,#504942)); +#504914 = ORIENTED_EDGE('',*,*,#504915,.T.); +#504915 = EDGE_CURVE('',#504916,#504918,#504920,.T.); +#504916 = VERTEX_POINT('',#504917); +#504917 = CARTESIAN_POINT('',(142.12,-158.45,1.51)); +#504918 = VERTEX_POINT('',#504919); +#504919 = CARTESIAN_POINT('',(141.52,-158.45,1.51)); +#504920 = CIRCLE('',#504921,0.3); +#504921 = AXIS2_PLACEMENT_3D('',#504922,#504923,#504924); +#504922 = CARTESIAN_POINT('',(141.82,-158.45,1.51)); +#504923 = DIRECTION('',(-0.,0.,-1.)); +#504924 = DIRECTION('',(-1.,9.473903143468E-14,0.)); +#504925 = ORIENTED_EDGE('',*,*,#504926,.T.); +#504926 = EDGE_CURVE('',#504918,#504927,#504929,.T.); +#504927 = VERTEX_POINT('',#504928); +#504928 = CARTESIAN_POINT('',(141.52,-157.85,1.51)); +#504929 = LINE('',#504930,#504931); +#504930 = CARTESIAN_POINT('',(141.52,-78.925,1.51)); +#504931 = VECTOR('',#504932,1.); +#504932 = DIRECTION('',(-0.,1.,0.)); +#504933 = ORIENTED_EDGE('',*,*,#504934,.T.); +#504934 = EDGE_CURVE('',#504927,#504935,#504937,.T.); +#504935 = VERTEX_POINT('',#504936); +#504936 = CARTESIAN_POINT('',(142.12,-157.85,1.51)); +#504937 = CIRCLE('',#504938,0.3); +#504938 = AXIS2_PLACEMENT_3D('',#504939,#504940,#504941); +#504939 = CARTESIAN_POINT('',(141.82,-157.85,1.51)); +#504940 = DIRECTION('',(0.,-0.,-1.)); +#504941 = DIRECTION('',(1.,0.,-0.)); +#504942 = ORIENTED_EDGE('',*,*,#504943,.T.); +#504943 = EDGE_CURVE('',#504935,#504916,#504944,.T.); +#504944 = LINE('',#504945,#504946); +#504945 = CARTESIAN_POINT('',(142.12,-79.225,1.51)); +#504946 = VECTOR('',#504947,1.); +#504947 = DIRECTION('',(0.,-1.,0.)); +#504948 = FACE_BOUND('',#504949,.T.); +#504949 = EDGE_LOOP('',(#504950,#504961,#504969,#504978)); +#504950 = ORIENTED_EDGE('',*,*,#504951,.T.); +#504951 = EDGE_CURVE('',#504952,#504954,#504956,.T.); +#504952 = VERTEX_POINT('',#504953); +#504953 = CARTESIAN_POINT('',(142.12,-154.52,1.51)); +#504954 = VERTEX_POINT('',#504955); +#504955 = CARTESIAN_POINT('',(141.52,-154.52,1.51)); +#504956 = CIRCLE('',#504957,0.3); +#504957 = AXIS2_PLACEMENT_3D('',#504958,#504959,#504960); +#504958 = CARTESIAN_POINT('',(141.82,-154.52,1.51)); +#504959 = DIRECTION('',(-0.,0.,-1.)); +#504960 = DIRECTION('',(-1.,0.,0.)); +#504961 = ORIENTED_EDGE('',*,*,#504962,.T.); +#504962 = EDGE_CURVE('',#504954,#504963,#504965,.T.); +#504963 = VERTEX_POINT('',#504964); +#504964 = CARTESIAN_POINT('',(141.52,-153.42,1.51)); +#504965 = LINE('',#504966,#504967); +#504966 = CARTESIAN_POINT('',(141.52,-76.71,1.51)); +#504967 = VECTOR('',#504968,1.); +#504968 = DIRECTION('',(-0.,1.,0.)); +#504969 = ORIENTED_EDGE('',*,*,#504970,.T.); +#504970 = EDGE_CURVE('',#504963,#504971,#504973,.T.); +#504971 = VERTEX_POINT('',#504972); +#504972 = CARTESIAN_POINT('',(142.12,-153.42,1.51)); +#504973 = CIRCLE('',#504974,0.3); +#504974 = AXIS2_PLACEMENT_3D('',#504975,#504976,#504977); +#504975 = CARTESIAN_POINT('',(141.82,-153.42,1.51)); +#504976 = DIRECTION('',(0.,-0.,-1.)); +#504977 = DIRECTION('',(1.,0.,-0.)); +#504978 = ORIENTED_EDGE('',*,*,#504979,.T.); +#504979 = EDGE_CURVE('',#504971,#504952,#504980,.T.); +#504980 = LINE('',#504981,#504982); +#504981 = CARTESIAN_POINT('',(142.12,-77.26,1.51)); +#504982 = VECTOR('',#504983,1.); +#504983 = DIRECTION('',(0.,-1.,0.)); +#504984 = FACE_BOUND('',#504985,.T.); +#504985 = EDGE_LOOP('',(#504986)); +#504986 = ORIENTED_EDGE('',*,*,#504987,.T.); +#504987 = EDGE_CURVE('',#504988,#504988,#504990,.T.); +#504988 = VERTEX_POINT('',#504989); +#504989 = CARTESIAN_POINT('',(142.,-149.96,1.51)); +#504990 = CIRCLE('',#504991,0.46); +#504991 = AXIS2_PLACEMENT_3D('',#504992,#504993,#504994); +#504992 = CARTESIAN_POINT('',(142.,-149.5,1.51)); +#504993 = DIRECTION('',(-0.,0.,-1.)); +#504994 = DIRECTION('',(-0.,-1.,0.)); +#504995 = FACE_BOUND('',#504996,.T.); +#504996 = EDGE_LOOP('',(#504997)); +#504997 = ORIENTED_EDGE('',*,*,#504998,.T.); +#504998 = EDGE_CURVE('',#504999,#504999,#505001,.T.); +#504999 = VERTEX_POINT('',#505000); +#505000 = CARTESIAN_POINT('',(152.,-157.85,1.51)); +#505001 = CIRCLE('',#505002,1.35); +#505002 = AXIS2_PLACEMENT_3D('',#505003,#505004,#505005); +#505003 = CARTESIAN_POINT('',(152.,-156.5,1.51)); +#505004 = DIRECTION('',(-0.,0.,-1.)); +#505005 = DIRECTION('',(-0.,-1.,0.)); +#505006 = FACE_BOUND('',#505007,.T.); +#505007 = EDGE_LOOP('',(#505008)); +#505008 = ORIENTED_EDGE('',*,*,#505009,.T.); +#505009 = EDGE_CURVE('',#505010,#505010,#505012,.T.); +#505010 = VERTEX_POINT('',#505011); +#505011 = CARTESIAN_POINT('',(138.,-127.96,1.51)); +#505012 = CIRCLE('',#505013,0.46); +#505013 = AXIS2_PLACEMENT_3D('',#505014,#505015,#505016); +#505014 = CARTESIAN_POINT('',(138.,-127.5,1.51)); +#505015 = DIRECTION('',(-0.,0.,-1.)); +#505016 = DIRECTION('',(-0.,-1.,0.)); +#505017 = FACE_BOUND('',#505018,.T.); +#505018 = EDGE_LOOP('',(#505019)); +#505019 = ORIENTED_EDGE('',*,*,#505020,.T.); +#505020 = EDGE_CURVE('',#505021,#505021,#505023,.T.); +#505021 = VERTEX_POINT('',#505022); +#505022 = CARTESIAN_POINT('',(140.,-127.96,1.51)); +#505023 = CIRCLE('',#505024,0.46); +#505024 = AXIS2_PLACEMENT_3D('',#505025,#505026,#505027); +#505025 = CARTESIAN_POINT('',(140.,-127.5,1.51)); +#505026 = DIRECTION('',(-0.,0.,-1.)); +#505027 = DIRECTION('',(-0.,-1.,0.)); +#505028 = FACE_BOUND('',#505029,.T.); +#505029 = EDGE_LOOP('',(#505030)); +#505030 = ORIENTED_EDGE('',*,*,#505031,.T.); +#505031 = EDGE_CURVE('',#505032,#505032,#505034,.T.); +#505032 = VERTEX_POINT('',#505033); +#505033 = CARTESIAN_POINT('',(142.,-127.96,1.51)); +#505034 = CIRCLE('',#505035,0.46); +#505035 = AXIS2_PLACEMENT_3D('',#505036,#505037,#505038); +#505036 = CARTESIAN_POINT('',(142.,-127.5,1.51)); +#505037 = DIRECTION('',(-0.,0.,-1.)); +#505038 = DIRECTION('',(-0.,-1.,0.)); +#505039 = FACE_BOUND('',#505040,.T.); +#505040 = EDGE_LOOP('',(#505041)); +#505041 = ORIENTED_EDGE('',*,*,#505042,.T.); +#505042 = EDGE_CURVE('',#505043,#505043,#505045,.T.); +#505043 = VERTEX_POINT('',#505044); +#505044 = CARTESIAN_POINT('',(121.75,-103.1,1.51)); +#505045 = CIRCLE('',#505046,0.45); +#505046 = AXIS2_PLACEMENT_3D('',#505047,#505048,#505049); +#505047 = CARTESIAN_POINT('',(121.75,-102.65,1.51)); +#505048 = DIRECTION('',(-0.,0.,-1.)); +#505049 = DIRECTION('',(-0.,-1.,0.)); +#505050 = FACE_BOUND('',#505051,.T.); +#505051 = EDGE_LOOP('',(#505052)); +#505052 = ORIENTED_EDGE('',*,*,#505053,.T.); +#505053 = EDGE_CURVE('',#505054,#505054,#505056,.T.); +#505054 = VERTEX_POINT('',#505055); +#505055 = CARTESIAN_POINT('',(121.75,-98.85,1.51)); +#505056 = CIRCLE('',#505057,0.45); +#505057 = AXIS2_PLACEMENT_3D('',#505058,#505059,#505060); +#505058 = CARTESIAN_POINT('',(121.75,-98.4,1.51)); +#505059 = DIRECTION('',(-0.,0.,-1.)); +#505060 = DIRECTION('',(-0.,-1.,0.)); +#505061 = FACE_BOUND('',#505062,.T.); +#505062 = EDGE_LOOP('',(#505063)); +#505063 = ORIENTED_EDGE('',*,*,#505064,.T.); +#505064 = EDGE_CURVE('',#505065,#505065,#505067,.T.); +#505065 = VERTEX_POINT('',#505066); +#505066 = CARTESIAN_POINT('',(121.75,-93.075,1.51)); +#505067 = CIRCLE('',#505068,0.45); +#505068 = AXIS2_PLACEMENT_3D('',#505069,#505070,#505071); +#505069 = CARTESIAN_POINT('',(121.75,-92.625,1.51)); +#505070 = DIRECTION('',(-0.,0.,-1.)); +#505071 = DIRECTION('',(-0.,-1.,0.)); +#505072 = FACE_BOUND('',#505073,.T.); +#505073 = EDGE_LOOP('',(#505074)); +#505074 = ORIENTED_EDGE('',*,*,#505075,.T.); +#505075 = EDGE_CURVE('',#505076,#505076,#505078,.T.); +#505076 = VERTEX_POINT('',#505077); +#505077 = CARTESIAN_POINT('',(121.75,-88.825,1.51)); +#505078 = CIRCLE('',#505079,0.45); +#505079 = AXIS2_PLACEMENT_3D('',#505080,#505081,#505082); +#505080 = CARTESIAN_POINT('',(121.75,-88.375,1.51)); +#505081 = DIRECTION('',(-0.,0.,-1.)); +#505082 = DIRECTION('',(-0.,-1.,0.)); +#505083 = FACE_BOUND('',#505084,.T.); +#505084 = EDGE_LOOP('',(#505085)); +#505085 = ORIENTED_EDGE('',*,*,#505086,.T.); +#505086 = EDGE_CURVE('',#505087,#505087,#505089,.T.); +#505087 = VERTEX_POINT('',#505088); +#505088 = CARTESIAN_POINT('',(131.175,-101.025,1.51)); +#505089 = CIRCLE('',#505090,0.775); +#505090 = AXIS2_PLACEMENT_3D('',#505091,#505092,#505093); +#505091 = CARTESIAN_POINT('',(131.175,-100.25,1.51)); +#505092 = DIRECTION('',(-0.,0.,-1.)); +#505093 = DIRECTION('',(-0.,-1.,0.)); +#505094 = FACE_BOUND('',#505095,.T.); +#505095 = EDGE_LOOP('',(#505096)); +#505096 = ORIENTED_EDGE('',*,*,#505097,.T.); +#505097 = EDGE_CURVE('',#505098,#505098,#505100,.T.); +#505098 = VERTEX_POINT('',#505099); +#505099 = CARTESIAN_POINT('',(134.25,-106.125,1.51)); +#505100 = CIRCLE('',#505101,0.625); +#505101 = AXIS2_PLACEMENT_3D('',#505102,#505103,#505104); +#505102 = CARTESIAN_POINT('',(134.25,-105.5,1.51)); +#505103 = DIRECTION('',(-0.,0.,-1.)); +#505104 = DIRECTION('',(-0.,-1.,0.)); +#505105 = FACE_BOUND('',#505106,.T.); +#505106 = EDGE_LOOP('',(#505107)); +#505107 = ORIENTED_EDGE('',*,*,#505108,.T.); +#505108 = EDGE_CURVE('',#505109,#505109,#505111,.T.); +#505109 = VERTEX_POINT('',#505110); +#505110 = CARTESIAN_POINT('',(134.25,-101.625,1.51)); +#505111 = CIRCLE('',#505112,0.625); +#505112 = AXIS2_PLACEMENT_3D('',#505113,#505114,#505115); +#505113 = CARTESIAN_POINT('',(134.25,-101.,1.51)); +#505114 = DIRECTION('',(-0.,0.,-1.)); +#505115 = DIRECTION('',(-0.,-1.,0.)); +#505116 = FACE_BOUND('',#505117,.T.); +#505117 = EDGE_LOOP('',(#505118)); +#505118 = ORIENTED_EDGE('',*,*,#505119,.T.); +#505119 = EDGE_CURVE('',#505120,#505120,#505122,.T.); +#505120 = VERTEX_POINT('',#505121); +#505121 = CARTESIAN_POINT('',(131.175,-91.025,1.51)); +#505122 = CIRCLE('',#505123,0.775); +#505123 = AXIS2_PLACEMENT_3D('',#505124,#505125,#505126); +#505124 = CARTESIAN_POINT('',(131.175,-90.25,1.51)); +#505125 = DIRECTION('',(-0.,0.,-1.)); +#505126 = DIRECTION('',(-0.,-1.,0.)); +#505127 = FACE_BOUND('',#505128,.T.); +#505128 = EDGE_LOOP('',(#505129)); +#505129 = ORIENTED_EDGE('',*,*,#505130,.T.); +#505130 = EDGE_CURVE('',#505131,#505131,#505133,.T.); +#505131 = VERTEX_POINT('',#505132); +#505132 = CARTESIAN_POINT('',(135.,-87.045,1.51)); +#505133 = CIRCLE('',#505134,0.525); +#505134 = AXIS2_PLACEMENT_3D('',#505135,#505136,#505137); +#505135 = CARTESIAN_POINT('',(135.,-86.52,1.51)); +#505136 = DIRECTION('',(-0.,0.,-1.)); +#505137 = DIRECTION('',(-0.,-1.,0.)); +#505138 = FACE_BOUND('',#505139,.T.); +#505139 = EDGE_LOOP('',(#505140)); +#505140 = ORIENTED_EDGE('',*,*,#505141,.T.); +#505141 = EDGE_CURVE('',#505142,#505142,#505144,.T.); +#505142 = VERTEX_POINT('',#505143); +#505143 = CARTESIAN_POINT('',(137.5,-87.045,1.51)); +#505144 = CIRCLE('',#505145,0.525); +#505145 = AXIS2_PLACEMENT_3D('',#505146,#505147,#505148); +#505146 = CARTESIAN_POINT('',(137.5,-86.52,1.51)); +#505147 = DIRECTION('',(-0.,0.,-1.)); +#505148 = DIRECTION('',(-0.,-1.,0.)); +#505149 = FACE_BOUND('',#505150,.T.); +#505150 = EDGE_LOOP('',(#505151)); +#505151 = ORIENTED_EDGE('',*,*,#505152,.T.); +#505152 = EDGE_CURVE('',#505153,#505153,#505155,.T.); +#505153 = VERTEX_POINT('',#505154); +#505154 = CARTESIAN_POINT('',(123.3,-70.55,1.51)); +#505155 = CIRCLE('',#505156,1.35); +#505156 = AXIS2_PLACEMENT_3D('',#505157,#505158,#505159); +#505157 = CARTESIAN_POINT('',(123.3,-69.2,1.51)); +#505158 = DIRECTION('',(-0.,0.,-1.)); +#505159 = DIRECTION('',(-1.05265590483E-14,-1.,0.)); +#505160 = FACE_BOUND('',#505161,.T.); +#505161 = EDGE_LOOP('',(#505162)); +#505162 = ORIENTED_EDGE('',*,*,#505163,.T.); +#505163 = EDGE_CURVE('',#505164,#505164,#505166,.T.); +#505164 = VERTEX_POINT('',#505165); +#505165 = CARTESIAN_POINT('',(121.525,-62.2,1.51)); +#505166 = CIRCLE('',#505167,0.45); +#505167 = AXIS2_PLACEMENT_3D('',#505168,#505169,#505170); +#505168 = CARTESIAN_POINT('',(121.525,-61.75,1.51)); +#505169 = DIRECTION('',(-0.,0.,-1.)); +#505170 = DIRECTION('',(-0.,-1.,0.)); +#505171 = FACE_BOUND('',#505172,.T.); +#505172 = EDGE_LOOP('',(#505173)); +#505173 = ORIENTED_EDGE('',*,*,#505174,.T.); +#505174 = EDGE_CURVE('',#505175,#505175,#505177,.T.); +#505175 = VERTEX_POINT('',#505176); +#505176 = CARTESIAN_POINT('',(125.775,-62.2,1.51)); +#505177 = CIRCLE('',#505178,0.45); +#505178 = AXIS2_PLACEMENT_3D('',#505179,#505180,#505181); +#505179 = CARTESIAN_POINT('',(125.775,-61.75,1.51)); +#505180 = DIRECTION('',(-0.,0.,-1.)); +#505181 = DIRECTION('',(-0.,-1.,0.)); +#505182 = FACE_BOUND('',#505183,.T.); +#505183 = EDGE_LOOP('',(#505184)); +#505184 = ORIENTED_EDGE('',*,*,#505185,.T.); +#505185 = EDGE_CURVE('',#505186,#505186,#505188,.T.); +#505186 = VERTEX_POINT('',#505187); +#505187 = CARTESIAN_POINT('',(140.75,-106.125,1.51)); +#505188 = CIRCLE('',#505189,0.625); +#505189 = AXIS2_PLACEMENT_3D('',#505190,#505191,#505192); +#505190 = CARTESIAN_POINT('',(140.75,-105.5,1.51)); +#505191 = DIRECTION('',(-0.,0.,-1.)); +#505192 = DIRECTION('',(-0.,-1.,0.)); +#505193 = FACE_BOUND('',#505194,.T.); +#505194 = EDGE_LOOP('',(#505195)); +#505195 = ORIENTED_EDGE('',*,*,#505196,.T.); +#505196 = EDGE_CURVE('',#505197,#505197,#505199,.T.); +#505197 = VERTEX_POINT('',#505198); +#505198 = CARTESIAN_POINT('',(140.75,-101.625,1.51)); +#505199 = CIRCLE('',#505200,0.625); +#505200 = AXIS2_PLACEMENT_3D('',#505201,#505202,#505203); +#505201 = CARTESIAN_POINT('',(140.75,-101.,1.51)); +#505202 = DIRECTION('',(-0.,0.,-1.)); +#505203 = DIRECTION('',(-0.,-1.,0.)); +#505204 = FACE_BOUND('',#505205,.T.); +#505205 = EDGE_LOOP('',(#505206)); +#505206 = ORIENTED_EDGE('',*,*,#505207,.T.); +#505207 = EDGE_CURVE('',#505208,#505208,#505210,.T.); +#505208 = VERTEX_POINT('',#505209); +#505209 = CARTESIAN_POINT('',(143.825,-101.025,1.51)); +#505210 = CIRCLE('',#505211,0.775); +#505211 = AXIS2_PLACEMENT_3D('',#505212,#505213,#505214); +#505212 = CARTESIAN_POINT('',(143.825,-100.25,1.51)); +#505213 = DIRECTION('',(-0.,0.,-1.)); +#505214 = DIRECTION('',(-0.,-1.,0.)); +#505215 = FACE_BOUND('',#505216,.T.); +#505216 = EDGE_LOOP('',(#505217)); +#505217 = ORIENTED_EDGE('',*,*,#505218,.T.); +#505218 = EDGE_CURVE('',#505219,#505219,#505221,.T.); +#505219 = VERTEX_POINT('',#505220); +#505220 = CARTESIAN_POINT('',(140.,-87.045,1.51)); +#505221 = CIRCLE('',#505222,0.525); +#505222 = AXIS2_PLACEMENT_3D('',#505223,#505224,#505225); +#505223 = CARTESIAN_POINT('',(140.,-86.52,1.51)); +#505224 = DIRECTION('',(-0.,0.,-1.)); +#505225 = DIRECTION('',(-0.,-1.,0.)); +#505226 = FACE_BOUND('',#505227,.T.); +#505227 = EDGE_LOOP('',(#505228)); +#505228 = ORIENTED_EDGE('',*,*,#505229,.T.); +#505229 = EDGE_CURVE('',#505230,#505230,#505232,.T.); +#505230 = VERTEX_POINT('',#505231); +#505231 = CARTESIAN_POINT('',(143.825,-91.025,1.51)); +#505232 = CIRCLE('',#505233,0.775); +#505233 = AXIS2_PLACEMENT_3D('',#505234,#505235,#505236); +#505234 = CARTESIAN_POINT('',(143.825,-90.25,1.51)); +#505235 = DIRECTION('',(-0.,0.,-1.)); +#505236 = DIRECTION('',(-0.,-1.,0.)); +#505237 = FACE_BOUND('',#505238,.T.); +#505238 = EDGE_LOOP('',(#505239)); +#505239 = ORIENTED_EDGE('',*,*,#505240,.T.); +#505240 = EDGE_CURVE('',#505241,#505241,#505243,.T.); +#505241 = VERTEX_POINT('',#505242); +#505242 = CARTESIAN_POINT('',(153.2,-103.1,1.51)); +#505243 = CIRCLE('',#505244,0.45); +#505244 = AXIS2_PLACEMENT_3D('',#505245,#505246,#505247); +#505245 = CARTESIAN_POINT('',(153.2,-102.65,1.51)); +#505246 = DIRECTION('',(-0.,0.,-1.)); +#505247 = DIRECTION('',(-0.,-1.,0.)); +#505248 = FACE_BOUND('',#505249,.T.); +#505249 = EDGE_LOOP('',(#505250)); +#505250 = ORIENTED_EDGE('',*,*,#505251,.T.); +#505251 = EDGE_CURVE('',#505252,#505252,#505254,.T.); +#505252 = VERTEX_POINT('',#505253); +#505253 = CARTESIAN_POINT('',(153.2,-98.85,1.51)); +#505254 = CIRCLE('',#505255,0.45); +#505255 = AXIS2_PLACEMENT_3D('',#505256,#505257,#505258); +#505256 = CARTESIAN_POINT('',(153.2,-98.4,1.51)); +#505257 = DIRECTION('',(-0.,0.,-1.)); +#505258 = DIRECTION('',(-0.,-1.,0.)); +#505259 = FACE_BOUND('',#505260,.T.); +#505260 = EDGE_LOOP('',(#505261)); +#505261 = ORIENTED_EDGE('',*,*,#505262,.T.); +#505262 = EDGE_CURVE('',#505263,#505263,#505265,.T.); +#505263 = VERTEX_POINT('',#505264); +#505264 = CARTESIAN_POINT('',(146.23,-98.275,1.51)); +#505265 = CIRCLE('',#505266,0.525); +#505266 = AXIS2_PLACEMENT_3D('',#505267,#505268,#505269); +#505267 = CARTESIAN_POINT('',(146.23,-97.75,1.51)); +#505268 = DIRECTION('',(-0.,0.,-1.)); +#505269 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#505270 = FACE_BOUND('',#505271,.T.); +#505271 = EDGE_LOOP('',(#505272)); +#505272 = ORIENTED_EDGE('',*,*,#505273,.T.); +#505273 = EDGE_CURVE('',#505274,#505274,#505276,.T.); +#505274 = VERTEX_POINT('',#505275); +#505275 = CARTESIAN_POINT('',(146.23,-95.775,1.51)); +#505276 = CIRCLE('',#505277,0.525); +#505277 = AXIS2_PLACEMENT_3D('',#505278,#505279,#505280); +#505278 = CARTESIAN_POINT('',(146.23,-95.25,1.51)); +#505279 = DIRECTION('',(-0.,0.,-1.)); +#505280 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#505281 = FACE_BOUND('',#505282,.T.); +#505282 = EDGE_LOOP('',(#505283)); +#505283 = ORIENTED_EDGE('',*,*,#505284,.T.); +#505284 = EDGE_CURVE('',#505285,#505285,#505287,.T.); +#505285 = VERTEX_POINT('',#505286); +#505286 = CARTESIAN_POINT('',(146.23,-93.275,1.51)); +#505287 = CIRCLE('',#505288,0.525); +#505288 = AXIS2_PLACEMENT_3D('',#505289,#505290,#505291); +#505289 = CARTESIAN_POINT('',(146.23,-92.75,1.51)); +#505290 = DIRECTION('',(-0.,0.,-1.)); +#505291 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#505292 = FACE_BOUND('',#505293,.T.); +#505293 = EDGE_LOOP('',(#505294)); +#505294 = ORIENTED_EDGE('',*,*,#505295,.T.); +#505295 = EDGE_CURVE('',#505296,#505296,#505298,.T.); +#505296 = VERTEX_POINT('',#505297); +#505297 = CARTESIAN_POINT('',(153.2,-93.075,1.51)); +#505298 = CIRCLE('',#505299,0.45); +#505299 = AXIS2_PLACEMENT_3D('',#505300,#505301,#505302); +#505300 = CARTESIAN_POINT('',(153.2,-92.625,1.51)); +#505301 = DIRECTION('',(-0.,0.,-1.)); +#505302 = DIRECTION('',(-0.,-1.,0.)); +#505303 = FACE_BOUND('',#505304,.T.); +#505304 = EDGE_LOOP('',(#505305)); +#505305 = ORIENTED_EDGE('',*,*,#505306,.T.); +#505306 = EDGE_CURVE('',#505307,#505307,#505309,.T.); +#505307 = VERTEX_POINT('',#505308); +#505308 = CARTESIAN_POINT('',(153.2,-88.825,1.51)); +#505309 = CIRCLE('',#505310,0.45); +#505310 = AXIS2_PLACEMENT_3D('',#505311,#505312,#505313); +#505311 = CARTESIAN_POINT('',(153.2,-88.375,1.51)); +#505312 = DIRECTION('',(-0.,0.,-1.)); +#505313 = DIRECTION('',(-0.,-1.,0.)); +#505314 = FACE_BOUND('',#505315,.T.); +#505315 = EDGE_LOOP('',(#505316)); +#505316 = ORIENTED_EDGE('',*,*,#505317,.T.); +#505317 = EDGE_CURVE('',#505318,#505318,#505320,.T.); +#505318 = VERTEX_POINT('',#505319); +#505319 = CARTESIAN_POINT('',(150.5,-77.875,1.51)); +#505320 = CIRCLE('',#505321,0.375); +#505321 = AXIS2_PLACEMENT_3D('',#505322,#505323,#505324); +#505322 = CARTESIAN_POINT('',(150.5,-77.5,1.51)); +#505323 = DIRECTION('',(-0.,0.,-1.)); +#505324 = DIRECTION('',(-0.,-1.,0.)); +#505325 = FACE_BOUND('',#505326,.T.); +#505326 = EDGE_LOOP('',(#505327)); +#505327 = ORIENTED_EDGE('',*,*,#505328,.T.); +#505328 = EDGE_CURVE('',#505329,#505329,#505331,.T.); +#505329 = VERTEX_POINT('',#505330); +#505330 = CARTESIAN_POINT('',(152.5,-77.875,1.51)); +#505331 = CIRCLE('',#505332,0.375); +#505332 = AXIS2_PLACEMENT_3D('',#505333,#505334,#505335); +#505333 = CARTESIAN_POINT('',(152.5,-77.5,1.51)); +#505334 = DIRECTION('',(-0.,0.,-1.)); +#505335 = DIRECTION('',(-0.,-1.,0.)); +#505336 = FACE_BOUND('',#505337,.T.); +#505337 = EDGE_LOOP('',(#505338)); +#505338 = ORIENTED_EDGE('',*,*,#505339,.T.); +#505339 = EDGE_CURVE('',#505340,#505340,#505342,.T.); +#505340 = VERTEX_POINT('',#505341); +#505341 = CARTESIAN_POINT('',(149.225,-62.2,1.51)); +#505342 = CIRCLE('',#505343,0.45); +#505343 = AXIS2_PLACEMENT_3D('',#505344,#505345,#505346); +#505344 = CARTESIAN_POINT('',(149.225,-61.75,1.51)); +#505345 = DIRECTION('',(-0.,0.,-1.)); +#505346 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#505347 = FACE_BOUND('',#505348,.T.); +#505348 = EDGE_LOOP('',(#505349)); +#505349 = ORIENTED_EDGE('',*,*,#505350,.T.); +#505350 = EDGE_CURVE('',#505351,#505351,#505353,.T.); +#505351 = VERTEX_POINT('',#505352); +#505352 = CARTESIAN_POINT('',(151.7,-70.55,1.51)); +#505353 = CIRCLE('',#505354,1.35); +#505354 = AXIS2_PLACEMENT_3D('',#505355,#505356,#505357); +#505355 = CARTESIAN_POINT('',(151.7,-69.2,1.51)); +#505356 = DIRECTION('',(-0.,0.,-1.)); +#505357 = DIRECTION('',(-0.,-1.,0.)); +#505358 = FACE_BOUND('',#505359,.T.); +#505359 = EDGE_LOOP('',(#505360)); +#505360 = ORIENTED_EDGE('',*,*,#505361,.T.); +#505361 = EDGE_CURVE('',#505362,#505362,#505364,.T.); +#505362 = VERTEX_POINT('',#505363); +#505363 = CARTESIAN_POINT('',(153.475,-62.2,1.51)); +#505364 = CIRCLE('',#505365,0.45); +#505365 = AXIS2_PLACEMENT_3D('',#505366,#505367,#505368); +#505366 = CARTESIAN_POINT('',(153.475,-61.75,1.51)); +#505367 = DIRECTION('',(-0.,0.,-1.)); +#505368 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#505369 = PLANE('',#505370); +#505370 = AXIS2_PLACEMENT_3D('',#505371,#505372,#505373); +#505371 = CARTESIAN_POINT('',(0.,0.,1.51)); +#505372 = DIRECTION('',(0.,0.,1.)); +#505373 = DIRECTION('',(1.,0.,-0.)); +#505374 = ADVANCED_FACE('',(#505375),#505381,.T.); +#505375 = FACE_BOUND('',#505376,.T.); +#505376 = EDGE_LOOP('',(#505377,#505378,#505379,#505380)); +#505377 = ORIENTED_EDGE('',*,*,#503758,.T.); +#505378 = ORIENTED_EDGE('',*,*,#504581,.T.); +#505379 = ORIENTED_EDGE('',*,*,#503718,.F.); +#505380 = ORIENTED_EDGE('',*,*,#503782,.F.); +#505381 = PLANE('',#505382); +#505382 = AXIS2_PLACEMENT_3D('',#505383,#505384,#505385); +#505383 = CARTESIAN_POINT('',(120.,-60.,0.)); +#505384 = DIRECTION('',(0.,1.,0.)); +#505385 = DIRECTION('',(1.,0.,0.)); +#505386 = ADVANCED_FACE('',(#505387),#505398,.F.); +#505387 = FACE_BOUND('',#505388,.T.); +#505388 = EDGE_LOOP('',(#505389,#505390,#505396,#505397)); +#505389 = ORIENTED_EDGE('',*,*,#503791,.T.); +#505390 = ORIENTED_EDGE('',*,*,#505391,.T.); +#505391 = EDGE_CURVE('',#503792,#504591,#505392,.T.); +#505392 = LINE('',#505393,#505394); +#505393 = CARTESIAN_POINT('',(123.,-157.85,-4.6E-02)); +#505394 = VECTOR('',#505395,1.); +#505395 = DIRECTION('',(0.,0.,1.)); +#505396 = ORIENTED_EDGE('',*,*,#504590,.F.); +#505397 = ORIENTED_EDGE('',*,*,#505391,.F.); +#505398 = CYLINDRICAL_SURFACE('',#505399,1.35); +#505399 = AXIS2_PLACEMENT_3D('',#505400,#505401,#505402); +#505400 = CARTESIAN_POINT('',(123.,-156.5,-4.6E-02)); +#505401 = DIRECTION('',(-0.,-0.,-1.)); +#505402 = DIRECTION('',(-0.,-1.,0.)); +#505403 = ADVANCED_FACE('',(#505404),#505415,.F.); +#505404 = FACE_BOUND('',#505405,.T.); +#505405 = EDGE_LOOP('',(#505406,#505407,#505413,#505414)); +#505406 = ORIENTED_EDGE('',*,*,#503802,.T.); +#505407 = ORIENTED_EDGE('',*,*,#505408,.T.); +#505408 = EDGE_CURVE('',#503803,#504602,#505409,.T.); +#505409 = LINE('',#505410,#505411); +#505410 = CARTESIAN_POINT('',(124.,-149.96,-4.6E-02)); +#505411 = VECTOR('',#505412,1.); +#505412 = DIRECTION('',(0.,0.,1.)); +#505413 = ORIENTED_EDGE('',*,*,#504601,.F.); +#505414 = ORIENTED_EDGE('',*,*,#505408,.F.); +#505415 = CYLINDRICAL_SURFACE('',#505416,0.46); +#505416 = AXIS2_PLACEMENT_3D('',#505417,#505418,#505419); +#505417 = CARTESIAN_POINT('',(124.,-149.5,-4.6E-02)); +#505418 = DIRECTION('',(-0.,-0.,-1.)); +#505419 = DIRECTION('',(-0.,-1.,0.)); +#505420 = ADVANCED_FACE('',(#505421),#505432,.F.); +#505421 = FACE_BOUND('',#505422,.T.); +#505422 = EDGE_LOOP('',(#505423,#505424,#505430,#505431)); +#505423 = ORIENTED_EDGE('',*,*,#503813,.T.); +#505424 = ORIENTED_EDGE('',*,*,#505425,.T.); +#505425 = EDGE_CURVE('',#503814,#504613,#505426,.T.); +#505426 = LINE('',#505427,#505428); +#505427 = CARTESIAN_POINT('',(126.875,-158.4,-4.6E-02)); +#505428 = VECTOR('',#505429,1.); +#505429 = DIRECTION('',(0.,0.,1.)); +#505430 = ORIENTED_EDGE('',*,*,#504612,.F.); +#505431 = ORIENTED_EDGE('',*,*,#505425,.F.); +#505432 = CYLINDRICAL_SURFACE('',#505433,0.45); +#505433 = AXIS2_PLACEMENT_3D('',#505434,#505435,#505436); +#505434 = CARTESIAN_POINT('',(126.875,-157.95,-4.6E-02)); +#505435 = DIRECTION('',(-0.,-0.,-1.)); +#505436 = DIRECTION('',(-0.,-1.,0.)); +#505437 = ADVANCED_FACE('',(#505438),#505449,.F.); +#505438 = FACE_BOUND('',#505439,.T.); +#505439 = EDGE_LOOP('',(#505440,#505441,#505447,#505448)); +#505440 = ORIENTED_EDGE('',*,*,#503824,.T.); +#505441 = ORIENTED_EDGE('',*,*,#505442,.T.); +#505442 = EDGE_CURVE('',#503825,#504624,#505443,.T.); +#505443 = LINE('',#505444,#505445); +#505444 = CARTESIAN_POINT('',(126.,-149.96,-4.6E-02)); +#505445 = VECTOR('',#505446,1.); +#505446 = DIRECTION('',(0.,0.,1.)); +#505447 = ORIENTED_EDGE('',*,*,#504623,.F.); +#505448 = ORIENTED_EDGE('',*,*,#505442,.F.); +#505449 = CYLINDRICAL_SURFACE('',#505450,0.46); +#505450 = AXIS2_PLACEMENT_3D('',#505451,#505452,#505453); +#505451 = CARTESIAN_POINT('',(126.,-149.5,-4.6E-02)); +#505452 = DIRECTION('',(-0.,-0.,-1.)); +#505453 = DIRECTION('',(-0.,-1.,0.)); +#505454 = ADVANCED_FACE('',(#505455),#505466,.F.); +#505455 = FACE_BOUND('',#505456,.T.); +#505456 = EDGE_LOOP('',(#505457,#505458,#505464,#505465)); +#505457 = ORIENTED_EDGE('',*,*,#503835,.T.); +#505458 = ORIENTED_EDGE('',*,*,#505459,.T.); +#505459 = EDGE_CURVE('',#503836,#504635,#505460,.T.); +#505460 = LINE('',#505461,#505462); +#505461 = CARTESIAN_POINT('',(128.,-149.96,-4.6E-02)); +#505462 = VECTOR('',#505463,1.); +#505463 = DIRECTION('',(0.,0.,1.)); +#505464 = ORIENTED_EDGE('',*,*,#504634,.F.); +#505465 = ORIENTED_EDGE('',*,*,#505459,.F.); +#505466 = CYLINDRICAL_SURFACE('',#505467,0.46); +#505467 = AXIS2_PLACEMENT_3D('',#505468,#505469,#505470); +#505468 = CARTESIAN_POINT('',(128.,-149.5,-4.6E-02)); +#505469 = DIRECTION('',(-0.,-0.,-1.)); +#505470 = DIRECTION('',(-0.,-1.,0.)); +#505471 = ADVANCED_FACE('',(#505472),#505483,.F.); +#505472 = FACE_BOUND('',#505473,.T.); +#505473 = EDGE_LOOP('',(#505474,#505475,#505481,#505482)); +#505474 = ORIENTED_EDGE('',*,*,#503846,.T.); +#505475 = ORIENTED_EDGE('',*,*,#505476,.T.); +#505476 = EDGE_CURVE('',#503847,#504646,#505477,.T.); +#505477 = LINE('',#505478,#505479); +#505478 = CARTESIAN_POINT('',(131.125,-158.4,-4.6E-02)); +#505479 = VECTOR('',#505480,1.); +#505480 = DIRECTION('',(0.,0.,1.)); +#505481 = ORIENTED_EDGE('',*,*,#504645,.F.); +#505482 = ORIENTED_EDGE('',*,*,#505476,.F.); +#505483 = CYLINDRICAL_SURFACE('',#505484,0.45); +#505484 = AXIS2_PLACEMENT_3D('',#505485,#505486,#505487); +#505485 = CARTESIAN_POINT('',(131.125,-157.95,-4.6E-02)); +#505486 = DIRECTION('',(-0.,-0.,-1.)); +#505487 = DIRECTION('',(-0.,-1.,0.)); +#505488 = ADVANCED_FACE('',(#505489),#505505,.F.); +#505489 = FACE_BOUND('',#505490,.T.); +#505490 = EDGE_LOOP('',(#505491,#505492,#505498,#505499)); +#505491 = ORIENTED_EDGE('',*,*,#503857,.T.); +#505492 = ORIENTED_EDGE('',*,*,#505493,.T.); +#505493 = EDGE_CURVE('',#503860,#504659,#505494,.T.); +#505494 = LINE('',#505495,#505496); +#505495 = CARTESIAN_POINT('',(132.88,-158.45,-4.6E-02)); +#505496 = VECTOR('',#505497,1.); +#505497 = DIRECTION('',(0.,0.,1.)); +#505498 = ORIENTED_EDGE('',*,*,#504656,.F.); +#505499 = ORIENTED_EDGE('',*,*,#505500,.F.); +#505500 = EDGE_CURVE('',#503858,#504657,#505501,.T.); +#505501 = LINE('',#505502,#505503); +#505502 = CARTESIAN_POINT('',(133.48,-158.45,-4.6E-02)); +#505503 = VECTOR('',#505504,1.); +#505504 = DIRECTION('',(0.,0.,1.)); +#505505 = CYLINDRICAL_SURFACE('',#505506,0.3); +#505506 = AXIS2_PLACEMENT_3D('',#505507,#505508,#505509); +#505507 = CARTESIAN_POINT('',(133.18,-158.45,-4.6E-02)); +#505508 = DIRECTION('',(-0.,-0.,-1.)); +#505509 = DIRECTION('',(-1.,9.473903143469E-14,-0.)); +#505510 = ADVANCED_FACE('',(#505511),#505522,.T.); +#505511 = FACE_BOUND('',#505512,.T.); +#505512 = EDGE_LOOP('',(#505513,#505514,#505515,#505516)); +#505513 = ORIENTED_EDGE('',*,*,#503885,.T.); +#505514 = ORIENTED_EDGE('',*,*,#505500,.T.); +#505515 = ORIENTED_EDGE('',*,*,#504684,.F.); +#505516 = ORIENTED_EDGE('',*,*,#505517,.F.); +#505517 = EDGE_CURVE('',#503877,#504676,#505518,.T.); +#505518 = LINE('',#505519,#505520); +#505519 = CARTESIAN_POINT('',(133.48,-157.85,-4.6E-02)); +#505520 = VECTOR('',#505521,1.); +#505521 = DIRECTION('',(0.,0.,1.)); +#505522 = PLANE('',#505523); +#505523 = AXIS2_PLACEMENT_3D('',#505524,#505525,#505526); +#505524 = CARTESIAN_POINT('',(133.48,-158.45,-4.6E-02)); +#505525 = DIRECTION('',(-1.,0.,0.)); +#505526 = DIRECTION('',(0.,1.,0.)); +#505527 = ADVANCED_FACE('',(#505528),#505539,.F.); +#505528 = FACE_BOUND('',#505529,.T.); +#505529 = EDGE_LOOP('',(#505530,#505531,#505532,#505533)); +#505530 = ORIENTED_EDGE('',*,*,#503876,.T.); +#505531 = ORIENTED_EDGE('',*,*,#505517,.T.); +#505532 = ORIENTED_EDGE('',*,*,#504675,.F.); +#505533 = ORIENTED_EDGE('',*,*,#505534,.F.); +#505534 = EDGE_CURVE('',#503869,#504668,#505535,.T.); +#505535 = LINE('',#505536,#505537); +#505536 = CARTESIAN_POINT('',(132.88,-157.85,-4.6E-02)); +#505537 = VECTOR('',#505538,1.); +#505538 = DIRECTION('',(0.,0.,1.)); +#505539 = CYLINDRICAL_SURFACE('',#505540,0.3); +#505540 = AXIS2_PLACEMENT_3D('',#505541,#505542,#505543); +#505541 = CARTESIAN_POINT('',(133.18,-157.85,-4.6E-02)); +#505542 = DIRECTION('',(-0.,-0.,-1.)); +#505543 = DIRECTION('',(1.,0.,-0.)); +#505544 = ADVANCED_FACE('',(#505545),#505551,.T.); +#505545 = FACE_BOUND('',#505546,.T.); +#505546 = EDGE_LOOP('',(#505547,#505548,#505549,#505550)); +#505547 = ORIENTED_EDGE('',*,*,#503868,.T.); +#505548 = ORIENTED_EDGE('',*,*,#505534,.T.); +#505549 = ORIENTED_EDGE('',*,*,#504667,.F.); +#505550 = ORIENTED_EDGE('',*,*,#505493,.F.); +#505551 = PLANE('',#505552); +#505552 = AXIS2_PLACEMENT_3D('',#505553,#505554,#505555); +#505553 = CARTESIAN_POINT('',(132.88,-157.85,-4.6E-02)); +#505554 = DIRECTION('',(1.,0.,-0.)); +#505555 = DIRECTION('',(0.,-1.,0.)); +#505556 = ADVANCED_FACE('',(#505557),#505573,.F.); +#505557 = FACE_BOUND('',#505558,.T.); +#505558 = EDGE_LOOP('',(#505559,#505560,#505566,#505567)); +#505559 = ORIENTED_EDGE('',*,*,#503893,.T.); +#505560 = ORIENTED_EDGE('',*,*,#505561,.T.); +#505561 = EDGE_CURVE('',#503896,#504695,#505562,.T.); +#505562 = LINE('',#505563,#505564); +#505563 = CARTESIAN_POINT('',(132.88,-154.52,-4.6E-02)); +#505564 = VECTOR('',#505565,1.); +#505565 = DIRECTION('',(0.,0.,1.)); +#505566 = ORIENTED_EDGE('',*,*,#504692,.F.); +#505567 = ORIENTED_EDGE('',*,*,#505568,.F.); +#505568 = EDGE_CURVE('',#503894,#504693,#505569,.T.); +#505569 = LINE('',#505570,#505571); +#505570 = CARTESIAN_POINT('',(133.48,-154.52,-4.6E-02)); +#505571 = VECTOR('',#505572,1.); +#505572 = DIRECTION('',(0.,0.,1.)); +#505573 = CYLINDRICAL_SURFACE('',#505574,0.3); +#505574 = AXIS2_PLACEMENT_3D('',#505575,#505576,#505577); +#505575 = CARTESIAN_POINT('',(133.18,-154.52,-4.6E-02)); +#505576 = DIRECTION('',(-0.,-0.,-1.)); +#505577 = DIRECTION('',(-1.,0.,-0.)); +#505578 = ADVANCED_FACE('',(#505579),#505590,.T.); +#505579 = FACE_BOUND('',#505580,.T.); +#505580 = EDGE_LOOP('',(#505581,#505582,#505583,#505584)); +#505581 = ORIENTED_EDGE('',*,*,#503921,.T.); +#505582 = ORIENTED_EDGE('',*,*,#505568,.T.); +#505583 = ORIENTED_EDGE('',*,*,#504720,.F.); +#505584 = ORIENTED_EDGE('',*,*,#505585,.F.); +#505585 = EDGE_CURVE('',#503913,#504712,#505586,.T.); +#505586 = LINE('',#505587,#505588); +#505587 = CARTESIAN_POINT('',(133.48,-153.42,-4.6E-02)); +#505588 = VECTOR('',#505589,1.); +#505589 = DIRECTION('',(0.,0.,1.)); +#505590 = PLANE('',#505591); +#505591 = AXIS2_PLACEMENT_3D('',#505592,#505593,#505594); +#505592 = CARTESIAN_POINT('',(133.48,-154.52,-4.6E-02)); +#505593 = DIRECTION('',(-1.,0.,0.)); +#505594 = DIRECTION('',(0.,1.,0.)); +#505595 = ADVANCED_FACE('',(#505596),#505607,.F.); +#505596 = FACE_BOUND('',#505597,.T.); +#505597 = EDGE_LOOP('',(#505598,#505599,#505600,#505601)); +#505598 = ORIENTED_EDGE('',*,*,#503912,.T.); +#505599 = ORIENTED_EDGE('',*,*,#505585,.T.); +#505600 = ORIENTED_EDGE('',*,*,#504711,.F.); +#505601 = ORIENTED_EDGE('',*,*,#505602,.F.); +#505602 = EDGE_CURVE('',#503905,#504704,#505603,.T.); +#505603 = LINE('',#505604,#505605); +#505604 = CARTESIAN_POINT('',(132.88,-153.42,-4.6E-02)); +#505605 = VECTOR('',#505606,1.); +#505606 = DIRECTION('',(0.,0.,1.)); +#505607 = CYLINDRICAL_SURFACE('',#505608,0.3); +#505608 = AXIS2_PLACEMENT_3D('',#505609,#505610,#505611); +#505609 = CARTESIAN_POINT('',(133.18,-153.42,-4.6E-02)); +#505610 = DIRECTION('',(-0.,-0.,-1.)); +#505611 = DIRECTION('',(1.,0.,-0.)); +#505612 = ADVANCED_FACE('',(#505613),#505619,.T.); +#505613 = FACE_BOUND('',#505614,.T.); +#505614 = EDGE_LOOP('',(#505615,#505616,#505617,#505618)); +#505615 = ORIENTED_EDGE('',*,*,#503904,.T.); +#505616 = ORIENTED_EDGE('',*,*,#505602,.T.); +#505617 = ORIENTED_EDGE('',*,*,#504703,.F.); +#505618 = ORIENTED_EDGE('',*,*,#505561,.F.); +#505619 = PLANE('',#505620); +#505620 = AXIS2_PLACEMENT_3D('',#505621,#505622,#505623); +#505621 = CARTESIAN_POINT('',(132.88,-153.42,-4.6E-02)); +#505622 = DIRECTION('',(1.,0.,-0.)); +#505623 = DIRECTION('',(0.,-1.,0.)); +#505624 = ADVANCED_FACE('',(#505625),#505636,.F.); +#505625 = FACE_BOUND('',#505626,.T.); +#505626 = EDGE_LOOP('',(#505627,#505628,#505634,#505635)); +#505627 = ORIENTED_EDGE('',*,*,#503929,.T.); +#505628 = ORIENTED_EDGE('',*,*,#505629,.T.); +#505629 = EDGE_CURVE('',#503930,#504729,#505630,.T.); +#505630 = LINE('',#505631,#505632); +#505631 = CARTESIAN_POINT('',(130.,-149.96,-4.6E-02)); +#505632 = VECTOR('',#505633,1.); +#505633 = DIRECTION('',(0.,0.,1.)); +#505634 = ORIENTED_EDGE('',*,*,#504728,.F.); +#505635 = ORIENTED_EDGE('',*,*,#505629,.F.); +#505636 = CYLINDRICAL_SURFACE('',#505637,0.46); +#505637 = AXIS2_PLACEMENT_3D('',#505638,#505639,#505640); +#505638 = CARTESIAN_POINT('',(130.,-149.5,-4.6E-02)); +#505639 = DIRECTION('',(-0.,-0.,-1.)); +#505640 = DIRECTION('',(-0.,-1.,0.)); +#505641 = ADVANCED_FACE('',(#505642),#505653,.F.); +#505642 = FACE_BOUND('',#505643,.T.); +#505643 = EDGE_LOOP('',(#505644,#505645,#505651,#505652)); +#505644 = ORIENTED_EDGE('',*,*,#503940,.T.); +#505645 = ORIENTED_EDGE('',*,*,#505646,.T.); +#505646 = EDGE_CURVE('',#503941,#504740,#505647,.T.); +#505647 = LINE('',#505648,#505649); +#505648 = CARTESIAN_POINT('',(132.,-149.96,-4.6E-02)); +#505649 = VECTOR('',#505650,1.); +#505650 = DIRECTION('',(0.,0.,1.)); +#505651 = ORIENTED_EDGE('',*,*,#504739,.F.); +#505652 = ORIENTED_EDGE('',*,*,#505646,.F.); +#505653 = CYLINDRICAL_SURFACE('',#505654,0.46); +#505654 = AXIS2_PLACEMENT_3D('',#505655,#505656,#505657); +#505655 = CARTESIAN_POINT('',(132.,-149.5,-4.6E-02)); +#505656 = DIRECTION('',(-0.,-0.,-1.)); +#505657 = DIRECTION('',(-0.,-1.,0.)); +#505658 = ADVANCED_FACE('',(#505659),#505670,.F.); +#505659 = FACE_BOUND('',#505660,.T.); +#505660 = EDGE_LOOP('',(#505661,#505662,#505668,#505669)); +#505661 = ORIENTED_EDGE('',*,*,#503951,.T.); +#505662 = ORIENTED_EDGE('',*,*,#505663,.T.); +#505663 = EDGE_CURVE('',#503952,#504751,#505664,.T.); +#505664 = LINE('',#505665,#505666); +#505665 = CARTESIAN_POINT('',(134.61,-154.825,-4.6E-02)); +#505666 = VECTOR('',#505667,1.); +#505667 = DIRECTION('',(0.,0.,1.)); +#505668 = ORIENTED_EDGE('',*,*,#504750,.F.); +#505669 = ORIENTED_EDGE('',*,*,#505663,.F.); +#505670 = CYLINDRICAL_SURFACE('',#505671,0.325); +#505671 = AXIS2_PLACEMENT_3D('',#505672,#505673,#505674); +#505672 = CARTESIAN_POINT('',(134.61,-154.5,-4.6E-02)); +#505673 = DIRECTION('',(-0.,-0.,-1.)); +#505674 = DIRECTION('',(-0.,-1.,0.)); +#505675 = ADVANCED_FACE('',(#505676),#505687,.F.); +#505676 = FACE_BOUND('',#505677,.T.); +#505677 = EDGE_LOOP('',(#505678,#505679,#505685,#505686)); +#505678 = ORIENTED_EDGE('',*,*,#503962,.T.); +#505679 = ORIENTED_EDGE('',*,*,#505680,.T.); +#505680 = EDGE_CURVE('',#503963,#504762,#505681,.T.); +#505681 = LINE('',#505682,#505683); +#505682 = CARTESIAN_POINT('',(134.,-149.96,-4.6E-02)); +#505683 = VECTOR('',#505684,1.); +#505684 = DIRECTION('',(0.,0.,1.)); +#505685 = ORIENTED_EDGE('',*,*,#504761,.F.); +#505686 = ORIENTED_EDGE('',*,*,#505680,.F.); +#505687 = CYLINDRICAL_SURFACE('',#505688,0.46); +#505688 = AXIS2_PLACEMENT_3D('',#505689,#505690,#505691); +#505689 = CARTESIAN_POINT('',(134.,-149.5,-4.6E-02)); +#505690 = DIRECTION('',(-0.,-0.,-1.)); +#505691 = DIRECTION('',(-0.,-1.,0.)); +#505692 = ADVANCED_FACE('',(#505693),#505704,.F.); +#505693 = FACE_BOUND('',#505694,.T.); +#505694 = EDGE_LOOP('',(#505695,#505696,#505702,#505703)); +#505695 = ORIENTED_EDGE('',*,*,#503973,.T.); +#505696 = ORIENTED_EDGE('',*,*,#505697,.T.); +#505697 = EDGE_CURVE('',#503974,#504773,#505698,.T.); +#505698 = LINE('',#505699,#505700); +#505699 = CARTESIAN_POINT('',(136.,-149.96,-4.6E-02)); +#505700 = VECTOR('',#505701,1.); +#505701 = DIRECTION('',(0.,0.,1.)); +#505702 = ORIENTED_EDGE('',*,*,#504772,.F.); +#505703 = ORIENTED_EDGE('',*,*,#505697,.F.); +#505704 = CYLINDRICAL_SURFACE('',#505705,0.46); +#505705 = AXIS2_PLACEMENT_3D('',#505706,#505707,#505708); +#505706 = CARTESIAN_POINT('',(136.,-149.5,-4.6E-02)); +#505707 = DIRECTION('',(-0.,-0.,-1.)); +#505708 = DIRECTION('',(-0.,-1.,0.)); +#505709 = ADVANCED_FACE('',(#505710),#505721,.F.); +#505710 = FACE_BOUND('',#505711,.T.); +#505711 = EDGE_LOOP('',(#505712,#505713,#505719,#505720)); +#505712 = ORIENTED_EDGE('',*,*,#503984,.T.); +#505713 = ORIENTED_EDGE('',*,*,#505714,.T.); +#505714 = EDGE_CURVE('',#503985,#504784,#505715,.T.); +#505715 = LINE('',#505716,#505717); +#505716 = CARTESIAN_POINT('',(124.,-127.96,-4.6E-02)); +#505717 = VECTOR('',#505718,1.); +#505718 = DIRECTION('',(0.,0.,1.)); +#505719 = ORIENTED_EDGE('',*,*,#504783,.F.); +#505720 = ORIENTED_EDGE('',*,*,#505714,.F.); +#505721 = CYLINDRICAL_SURFACE('',#505722,0.46); +#505722 = AXIS2_PLACEMENT_3D('',#505723,#505724,#505725); +#505723 = CARTESIAN_POINT('',(124.,-127.5,-4.6E-02)); +#505724 = DIRECTION('',(-0.,-0.,-1.)); +#505725 = DIRECTION('',(-0.,-1.,0.)); +#505726 = ADVANCED_FACE('',(#505727),#505738,.F.); +#505727 = FACE_BOUND('',#505728,.T.); +#505728 = EDGE_LOOP('',(#505729,#505730,#505736,#505737)); +#505729 = ORIENTED_EDGE('',*,*,#503995,.T.); +#505730 = ORIENTED_EDGE('',*,*,#505731,.T.); +#505731 = EDGE_CURVE('',#503996,#504795,#505732,.T.); +#505732 = LINE('',#505733,#505734); +#505733 = CARTESIAN_POINT('',(126.,-127.96,-4.6E-02)); +#505734 = VECTOR('',#505735,1.); +#505735 = DIRECTION('',(0.,0.,1.)); +#505736 = ORIENTED_EDGE('',*,*,#504794,.F.); +#505737 = ORIENTED_EDGE('',*,*,#505731,.F.); +#505738 = CYLINDRICAL_SURFACE('',#505739,0.46); +#505739 = AXIS2_PLACEMENT_3D('',#505740,#505741,#505742); +#505740 = CARTESIAN_POINT('',(126.,-127.5,-4.6E-02)); +#505741 = DIRECTION('',(-0.,-0.,-1.)); +#505742 = DIRECTION('',(-0.,-1.,0.)); +#505743 = ADVANCED_FACE('',(#505744),#505755,.F.); +#505744 = FACE_BOUND('',#505745,.T.); +#505745 = EDGE_LOOP('',(#505746,#505747,#505753,#505754)); +#505746 = ORIENTED_EDGE('',*,*,#504006,.T.); +#505747 = ORIENTED_EDGE('',*,*,#505748,.T.); +#505748 = EDGE_CURVE('',#504007,#504806,#505749,.T.); +#505749 = LINE('',#505750,#505751); +#505750 = CARTESIAN_POINT('',(128.,-127.96,-4.6E-02)); +#505751 = VECTOR('',#505752,1.); +#505752 = DIRECTION('',(0.,0.,1.)); +#505753 = ORIENTED_EDGE('',*,*,#504805,.F.); +#505754 = ORIENTED_EDGE('',*,*,#505748,.F.); +#505755 = CYLINDRICAL_SURFACE('',#505756,0.46); +#505756 = AXIS2_PLACEMENT_3D('',#505757,#505758,#505759); +#505757 = CARTESIAN_POINT('',(128.,-127.5,-4.6E-02)); +#505758 = DIRECTION('',(-0.,-0.,-1.)); +#505759 = DIRECTION('',(-0.,-1.,0.)); +#505760 = ADVANCED_FACE('',(#505761),#505772,.F.); +#505761 = FACE_BOUND('',#505762,.T.); +#505762 = EDGE_LOOP('',(#505763,#505764,#505770,#505771)); +#505763 = ORIENTED_EDGE('',*,*,#504017,.T.); +#505764 = ORIENTED_EDGE('',*,*,#505765,.T.); +#505765 = EDGE_CURVE('',#504018,#504817,#505766,.T.); +#505766 = LINE('',#505767,#505768); +#505767 = CARTESIAN_POINT('',(130.,-127.96,-4.6E-02)); +#505768 = VECTOR('',#505769,1.); +#505769 = DIRECTION('',(0.,0.,1.)); +#505770 = ORIENTED_EDGE('',*,*,#504816,.F.); +#505771 = ORIENTED_EDGE('',*,*,#505765,.F.); +#505772 = CYLINDRICAL_SURFACE('',#505773,0.46); +#505773 = AXIS2_PLACEMENT_3D('',#505774,#505775,#505776); +#505774 = CARTESIAN_POINT('',(130.,-127.5,-4.6E-02)); +#505775 = DIRECTION('',(-0.,-0.,-1.)); +#505776 = DIRECTION('',(-0.,-1.,0.)); +#505777 = ADVANCED_FACE('',(#505778),#505789,.F.); +#505778 = FACE_BOUND('',#505779,.T.); +#505779 = EDGE_LOOP('',(#505780,#505781,#505787,#505788)); +#505780 = ORIENTED_EDGE('',*,*,#504028,.T.); +#505781 = ORIENTED_EDGE('',*,*,#505782,.T.); +#505782 = EDGE_CURVE('',#504029,#504828,#505783,.T.); +#505783 = LINE('',#505784,#505785); +#505784 = CARTESIAN_POINT('',(132.,-127.96,-4.6E-02)); +#505785 = VECTOR('',#505786,1.); +#505786 = DIRECTION('',(0.,0.,1.)); +#505787 = ORIENTED_EDGE('',*,*,#504827,.F.); +#505788 = ORIENTED_EDGE('',*,*,#505782,.F.); +#505789 = CYLINDRICAL_SURFACE('',#505790,0.46); +#505790 = AXIS2_PLACEMENT_3D('',#505791,#505792,#505793); +#505791 = CARTESIAN_POINT('',(132.,-127.5,-4.6E-02)); +#505792 = DIRECTION('',(-0.,-0.,-1.)); +#505793 = DIRECTION('',(-0.,-1.,0.)); +#505794 = ADVANCED_FACE('',(#505795),#505806,.F.); +#505795 = FACE_BOUND('',#505796,.T.); +#505796 = EDGE_LOOP('',(#505797,#505798,#505804,#505805)); +#505797 = ORIENTED_EDGE('',*,*,#504039,.T.); +#505798 = ORIENTED_EDGE('',*,*,#505799,.T.); +#505799 = EDGE_CURVE('',#504040,#504839,#505800,.T.); +#505800 = LINE('',#505801,#505802); +#505801 = CARTESIAN_POINT('',(134.,-127.96,-4.6E-02)); +#505802 = VECTOR('',#505803,1.); +#505803 = DIRECTION('',(0.,0.,1.)); +#505804 = ORIENTED_EDGE('',*,*,#504838,.F.); +#505805 = ORIENTED_EDGE('',*,*,#505799,.F.); +#505806 = CYLINDRICAL_SURFACE('',#505807,0.46); +#505807 = AXIS2_PLACEMENT_3D('',#505808,#505809,#505810); +#505808 = CARTESIAN_POINT('',(134.,-127.5,-4.6E-02)); +#505809 = DIRECTION('',(-0.,-0.,-1.)); +#505810 = DIRECTION('',(-0.,-1.,0.)); +#505811 = ADVANCED_FACE('',(#505812),#505823,.F.); +#505812 = FACE_BOUND('',#505813,.T.); +#505813 = EDGE_LOOP('',(#505814,#505815,#505821,#505822)); +#505814 = ORIENTED_EDGE('',*,*,#504050,.T.); +#505815 = ORIENTED_EDGE('',*,*,#505816,.T.); +#505816 = EDGE_CURVE('',#504051,#504850,#505817,.T.); +#505817 = LINE('',#505818,#505819); +#505818 = CARTESIAN_POINT('',(136.,-127.96,-4.6E-02)); +#505819 = VECTOR('',#505820,1.); +#505820 = DIRECTION('',(0.,0.,1.)); +#505821 = ORIENTED_EDGE('',*,*,#504849,.F.); +#505822 = ORIENTED_EDGE('',*,*,#505816,.F.); +#505823 = CYLINDRICAL_SURFACE('',#505824,0.46); +#505824 = AXIS2_PLACEMENT_3D('',#505825,#505826,#505827); +#505825 = CARTESIAN_POINT('',(136.,-127.5,-4.6E-02)); +#505826 = DIRECTION('',(-0.,-0.,-1.)); +#505827 = DIRECTION('',(-0.,-1.,0.)); +#505828 = ADVANCED_FACE('',(#505829),#505840,.F.); +#505829 = FACE_BOUND('',#505830,.T.); +#505830 = EDGE_LOOP('',(#505831,#505832,#505838,#505839)); +#505831 = ORIENTED_EDGE('',*,*,#504061,.T.); +#505832 = ORIENTED_EDGE('',*,*,#505833,.T.); +#505833 = EDGE_CURVE('',#504062,#504861,#505834,.T.); +#505834 = LINE('',#505835,#505836); +#505835 = CARTESIAN_POINT('',(133.,-119.6,-4.6E-02)); +#505836 = VECTOR('',#505837,1.); +#505837 = DIRECTION('',(0.,0.,1.)); +#505838 = ORIENTED_EDGE('',*,*,#504860,.F.); +#505839 = ORIENTED_EDGE('',*,*,#505833,.F.); +#505840 = CYLINDRICAL_SURFACE('',#505841,1.E-01); +#505841 = AXIS2_PLACEMENT_3D('',#505842,#505843,#505844); +#505842 = CARTESIAN_POINT('',(133.,-119.5,-4.6E-02)); +#505843 = DIRECTION('',(-0.,-0.,-1.)); +#505844 = DIRECTION('',(-0.,-1.,0.)); +#505845 = ADVANCED_FACE('',(#505846),#505857,.F.); +#505846 = FACE_BOUND('',#505847,.T.); +#505847 = EDGE_LOOP('',(#505848,#505849,#505855,#505856)); +#505848 = ORIENTED_EDGE('',*,*,#504072,.T.); +#505849 = ORIENTED_EDGE('',*,*,#505850,.T.); +#505850 = EDGE_CURVE('',#504073,#504872,#505851,.T.); +#505851 = LINE('',#505852,#505853); +#505852 = CARTESIAN_POINT('',(133.,-118.6,-4.6E-02)); +#505853 = VECTOR('',#505854,1.); +#505854 = DIRECTION('',(0.,0.,1.)); +#505855 = ORIENTED_EDGE('',*,*,#504871,.F.); +#505856 = ORIENTED_EDGE('',*,*,#505850,.F.); +#505857 = CYLINDRICAL_SURFACE('',#505858,1.E-01); +#505858 = AXIS2_PLACEMENT_3D('',#505859,#505860,#505861); +#505859 = CARTESIAN_POINT('',(133.,-118.5,-4.6E-02)); +#505860 = DIRECTION('',(-0.,-0.,-1.)); +#505861 = DIRECTION('',(-0.,-1.,0.)); +#505862 = ADVANCED_FACE('',(#505863),#505874,.F.); +#505863 = FACE_BOUND('',#505864,.T.); +#505864 = EDGE_LOOP('',(#505865,#505866,#505872,#505873)); +#505865 = ORIENTED_EDGE('',*,*,#504083,.T.); +#505866 = ORIENTED_EDGE('',*,*,#505867,.T.); +#505867 = EDGE_CURVE('',#504084,#504883,#505868,.T.); +#505868 = LINE('',#505869,#505870); +#505869 = CARTESIAN_POINT('',(140.39,-154.825,-4.6E-02)); +#505870 = VECTOR('',#505871,1.); +#505871 = DIRECTION('',(0.,0.,1.)); +#505872 = ORIENTED_EDGE('',*,*,#504882,.F.); +#505873 = ORIENTED_EDGE('',*,*,#505867,.F.); +#505874 = CYLINDRICAL_SURFACE('',#505875,0.325); +#505875 = AXIS2_PLACEMENT_3D('',#505876,#505877,#505878); +#505876 = CARTESIAN_POINT('',(140.39,-154.5,-4.6E-02)); +#505877 = DIRECTION('',(-0.,-0.,-1.)); +#505878 = DIRECTION('',(-0.,-1.,0.)); +#505879 = ADVANCED_FACE('',(#505880),#505891,.F.); +#505880 = FACE_BOUND('',#505881,.T.); +#505881 = EDGE_LOOP('',(#505882,#505883,#505889,#505890)); +#505882 = ORIENTED_EDGE('',*,*,#504094,.T.); +#505883 = ORIENTED_EDGE('',*,*,#505884,.T.); +#505884 = EDGE_CURVE('',#504095,#504894,#505885,.T.); +#505885 = LINE('',#505886,#505887); +#505886 = CARTESIAN_POINT('',(138.,-149.96,-4.6E-02)); +#505887 = VECTOR('',#505888,1.); +#505888 = DIRECTION('',(0.,0.,1.)); +#505889 = ORIENTED_EDGE('',*,*,#504893,.F.); +#505890 = ORIENTED_EDGE('',*,*,#505884,.F.); +#505891 = CYLINDRICAL_SURFACE('',#505892,0.46); +#505892 = AXIS2_PLACEMENT_3D('',#505893,#505894,#505895); +#505893 = CARTESIAN_POINT('',(138.,-149.5,-4.6E-02)); +#505894 = DIRECTION('',(-0.,-0.,-1.)); +#505895 = DIRECTION('',(-0.,-1.,0.)); +#505896 = ADVANCED_FACE('',(#505897),#505908,.F.); +#505897 = FACE_BOUND('',#505898,.T.); +#505898 = EDGE_LOOP('',(#505899,#505900,#505906,#505907)); +#505899 = ORIENTED_EDGE('',*,*,#504105,.T.); +#505900 = ORIENTED_EDGE('',*,*,#505901,.T.); +#505901 = EDGE_CURVE('',#504106,#504905,#505902,.T.); +#505902 = LINE('',#505903,#505904); +#505903 = CARTESIAN_POINT('',(140.,-149.96,-4.6E-02)); +#505904 = VECTOR('',#505905,1.); +#505905 = DIRECTION('',(0.,0.,1.)); +#505906 = ORIENTED_EDGE('',*,*,#504904,.F.); +#505907 = ORIENTED_EDGE('',*,*,#505901,.F.); +#505908 = CYLINDRICAL_SURFACE('',#505909,0.46); +#505909 = AXIS2_PLACEMENT_3D('',#505910,#505911,#505912); +#505910 = CARTESIAN_POINT('',(140.,-149.5,-4.6E-02)); +#505911 = DIRECTION('',(-0.,-0.,-1.)); +#505912 = DIRECTION('',(-0.,-1.,0.)); +#505913 = ADVANCED_FACE('',(#505914),#505930,.F.); +#505914 = FACE_BOUND('',#505915,.T.); +#505915 = EDGE_LOOP('',(#505916,#505917,#505923,#505924)); +#505916 = ORIENTED_EDGE('',*,*,#504116,.T.); +#505917 = ORIENTED_EDGE('',*,*,#505918,.T.); +#505918 = EDGE_CURVE('',#504119,#504918,#505919,.T.); +#505919 = LINE('',#505920,#505921); +#505920 = CARTESIAN_POINT('',(141.52,-158.45,-4.6E-02)); +#505921 = VECTOR('',#505922,1.); +#505922 = DIRECTION('',(0.,0.,1.)); +#505923 = ORIENTED_EDGE('',*,*,#504915,.F.); +#505924 = ORIENTED_EDGE('',*,*,#505925,.F.); +#505925 = EDGE_CURVE('',#504117,#504916,#505926,.T.); +#505926 = LINE('',#505927,#505928); +#505927 = CARTESIAN_POINT('',(142.12,-158.45,-4.6E-02)); +#505928 = VECTOR('',#505929,1.); +#505929 = DIRECTION('',(0.,0.,1.)); +#505930 = CYLINDRICAL_SURFACE('',#505931,0.3); +#505931 = AXIS2_PLACEMENT_3D('',#505932,#505933,#505934); +#505932 = CARTESIAN_POINT('',(141.82,-158.45,-4.6E-02)); +#505933 = DIRECTION('',(-0.,-0.,-1.)); +#505934 = DIRECTION('',(-1.,9.473903143468E-14,-0.)); +#505935 = ADVANCED_FACE('',(#505936),#505947,.T.); +#505936 = FACE_BOUND('',#505937,.T.); +#505937 = EDGE_LOOP('',(#505938,#505939,#505940,#505941)); +#505938 = ORIENTED_EDGE('',*,*,#504144,.T.); +#505939 = ORIENTED_EDGE('',*,*,#505925,.T.); +#505940 = ORIENTED_EDGE('',*,*,#504943,.F.); +#505941 = ORIENTED_EDGE('',*,*,#505942,.F.); +#505942 = EDGE_CURVE('',#504136,#504935,#505943,.T.); +#505943 = LINE('',#505944,#505945); +#505944 = CARTESIAN_POINT('',(142.12,-157.85,-4.6E-02)); +#505945 = VECTOR('',#505946,1.); +#505946 = DIRECTION('',(0.,0.,1.)); +#505947 = PLANE('',#505948); +#505948 = AXIS2_PLACEMENT_3D('',#505949,#505950,#505951); +#505949 = CARTESIAN_POINT('',(142.12,-158.45,-4.6E-02)); +#505950 = DIRECTION('',(-1.,0.,0.)); +#505951 = DIRECTION('',(0.,1.,0.)); +#505952 = ADVANCED_FACE('',(#505953),#505964,.F.); +#505953 = FACE_BOUND('',#505954,.T.); +#505954 = EDGE_LOOP('',(#505955,#505956,#505957,#505958)); +#505955 = ORIENTED_EDGE('',*,*,#504135,.T.); +#505956 = ORIENTED_EDGE('',*,*,#505942,.T.); +#505957 = ORIENTED_EDGE('',*,*,#504934,.F.); +#505958 = ORIENTED_EDGE('',*,*,#505959,.F.); +#505959 = EDGE_CURVE('',#504128,#504927,#505960,.T.); +#505960 = LINE('',#505961,#505962); +#505961 = CARTESIAN_POINT('',(141.52,-157.85,-4.6E-02)); +#505962 = VECTOR('',#505963,1.); +#505963 = DIRECTION('',(0.,0.,1.)); +#505964 = CYLINDRICAL_SURFACE('',#505965,0.3); +#505965 = AXIS2_PLACEMENT_3D('',#505966,#505967,#505968); +#505966 = CARTESIAN_POINT('',(141.82,-157.85,-4.6E-02)); +#505967 = DIRECTION('',(-0.,-0.,-1.)); +#505968 = DIRECTION('',(1.,0.,-0.)); +#505969 = ADVANCED_FACE('',(#505970),#505976,.T.); +#505970 = FACE_BOUND('',#505971,.T.); +#505971 = EDGE_LOOP('',(#505972,#505973,#505974,#505975)); +#505972 = ORIENTED_EDGE('',*,*,#504127,.T.); +#505973 = ORIENTED_EDGE('',*,*,#505959,.T.); +#505974 = ORIENTED_EDGE('',*,*,#504926,.F.); +#505975 = ORIENTED_EDGE('',*,*,#505918,.F.); +#505976 = PLANE('',#505977); +#505977 = AXIS2_PLACEMENT_3D('',#505978,#505979,#505980); +#505978 = CARTESIAN_POINT('',(141.52,-157.85,-4.6E-02)); +#505979 = DIRECTION('',(1.,0.,-0.)); +#505980 = DIRECTION('',(0.,-1.,0.)); +#505981 = ADVANCED_FACE('',(#505982),#505998,.F.); +#505982 = FACE_BOUND('',#505983,.T.); +#505983 = EDGE_LOOP('',(#505984,#505985,#505991,#505992)); +#505984 = ORIENTED_EDGE('',*,*,#504152,.T.); +#505985 = ORIENTED_EDGE('',*,*,#505986,.T.); +#505986 = EDGE_CURVE('',#504155,#504954,#505987,.T.); +#505987 = LINE('',#505988,#505989); +#505988 = CARTESIAN_POINT('',(141.52,-154.52,-4.6E-02)); +#505989 = VECTOR('',#505990,1.); +#505990 = DIRECTION('',(0.,0.,1.)); +#505991 = ORIENTED_EDGE('',*,*,#504951,.F.); +#505992 = ORIENTED_EDGE('',*,*,#505993,.F.); +#505993 = EDGE_CURVE('',#504153,#504952,#505994,.T.); +#505994 = LINE('',#505995,#505996); +#505995 = CARTESIAN_POINT('',(142.12,-154.52,-4.6E-02)); +#505996 = VECTOR('',#505997,1.); +#505997 = DIRECTION('',(0.,0.,1.)); +#505998 = CYLINDRICAL_SURFACE('',#505999,0.3); +#505999 = AXIS2_PLACEMENT_3D('',#506000,#506001,#506002); +#506000 = CARTESIAN_POINT('',(141.82,-154.52,-4.6E-02)); +#506001 = DIRECTION('',(-0.,-0.,-1.)); +#506002 = DIRECTION('',(-1.,0.,-0.)); +#506003 = ADVANCED_FACE('',(#506004),#506015,.T.); +#506004 = FACE_BOUND('',#506005,.T.); +#506005 = EDGE_LOOP('',(#506006,#506007,#506008,#506009)); +#506006 = ORIENTED_EDGE('',*,*,#504180,.T.); +#506007 = ORIENTED_EDGE('',*,*,#505993,.T.); +#506008 = ORIENTED_EDGE('',*,*,#504979,.F.); +#506009 = ORIENTED_EDGE('',*,*,#506010,.F.); +#506010 = EDGE_CURVE('',#504172,#504971,#506011,.T.); +#506011 = LINE('',#506012,#506013); +#506012 = CARTESIAN_POINT('',(142.12,-153.42,-4.6E-02)); +#506013 = VECTOR('',#506014,1.); +#506014 = DIRECTION('',(0.,0.,1.)); +#506015 = PLANE('',#506016); +#506016 = AXIS2_PLACEMENT_3D('',#506017,#506018,#506019); +#506017 = CARTESIAN_POINT('',(142.12,-154.52,-4.6E-02)); +#506018 = DIRECTION('',(-1.,0.,0.)); +#506019 = DIRECTION('',(0.,1.,0.)); +#506020 = ADVANCED_FACE('',(#506021),#506032,.F.); +#506021 = FACE_BOUND('',#506022,.T.); +#506022 = EDGE_LOOP('',(#506023,#506024,#506025,#506026)); +#506023 = ORIENTED_EDGE('',*,*,#504171,.T.); +#506024 = ORIENTED_EDGE('',*,*,#506010,.T.); +#506025 = ORIENTED_EDGE('',*,*,#504970,.F.); +#506026 = ORIENTED_EDGE('',*,*,#506027,.F.); +#506027 = EDGE_CURVE('',#504164,#504963,#506028,.T.); +#506028 = LINE('',#506029,#506030); +#506029 = CARTESIAN_POINT('',(141.52,-153.42,-4.6E-02)); +#506030 = VECTOR('',#506031,1.); +#506031 = DIRECTION('',(0.,0.,1.)); +#506032 = CYLINDRICAL_SURFACE('',#506033,0.3); +#506033 = AXIS2_PLACEMENT_3D('',#506034,#506035,#506036); +#506034 = CARTESIAN_POINT('',(141.82,-153.42,-4.6E-02)); +#506035 = DIRECTION('',(-0.,-0.,-1.)); +#506036 = DIRECTION('',(1.,0.,-0.)); +#506037 = ADVANCED_FACE('',(#506038),#506044,.T.); +#506038 = FACE_BOUND('',#506039,.T.); +#506039 = EDGE_LOOP('',(#506040,#506041,#506042,#506043)); +#506040 = ORIENTED_EDGE('',*,*,#504163,.T.); +#506041 = ORIENTED_EDGE('',*,*,#506027,.T.); +#506042 = ORIENTED_EDGE('',*,*,#504962,.F.); +#506043 = ORIENTED_EDGE('',*,*,#505986,.F.); +#506044 = PLANE('',#506045); +#506045 = AXIS2_PLACEMENT_3D('',#506046,#506047,#506048); +#506046 = CARTESIAN_POINT('',(141.52,-153.42,-4.6E-02)); +#506047 = DIRECTION('',(1.,0.,-0.)); +#506048 = DIRECTION('',(0.,-1.,0.)); +#506049 = ADVANCED_FACE('',(#506050),#506061,.F.); +#506050 = FACE_BOUND('',#506051,.T.); +#506051 = EDGE_LOOP('',(#506052,#506053,#506059,#506060)); +#506052 = ORIENTED_EDGE('',*,*,#504188,.T.); +#506053 = ORIENTED_EDGE('',*,*,#506054,.T.); +#506054 = EDGE_CURVE('',#504189,#504988,#506055,.T.); +#506055 = LINE('',#506056,#506057); +#506056 = CARTESIAN_POINT('',(142.,-149.96,-4.6E-02)); +#506057 = VECTOR('',#506058,1.); +#506058 = DIRECTION('',(0.,0.,1.)); +#506059 = ORIENTED_EDGE('',*,*,#504987,.F.); +#506060 = ORIENTED_EDGE('',*,*,#506054,.F.); +#506061 = CYLINDRICAL_SURFACE('',#506062,0.46); +#506062 = AXIS2_PLACEMENT_3D('',#506063,#506064,#506065); +#506063 = CARTESIAN_POINT('',(142.,-149.5,-4.6E-02)); +#506064 = DIRECTION('',(-0.,-0.,-1.)); +#506065 = DIRECTION('',(-0.,-1.,0.)); +#506066 = ADVANCED_FACE('',(#506067),#506078,.F.); +#506067 = FACE_BOUND('',#506068,.T.); +#506068 = EDGE_LOOP('',(#506069,#506070,#506076,#506077)); +#506069 = ORIENTED_EDGE('',*,*,#504199,.T.); +#506070 = ORIENTED_EDGE('',*,*,#506071,.T.); +#506071 = EDGE_CURVE('',#504200,#504999,#506072,.T.); +#506072 = LINE('',#506073,#506074); +#506073 = CARTESIAN_POINT('',(152.,-157.85,-4.6E-02)); +#506074 = VECTOR('',#506075,1.); +#506075 = DIRECTION('',(0.,0.,1.)); +#506076 = ORIENTED_EDGE('',*,*,#504998,.F.); +#506077 = ORIENTED_EDGE('',*,*,#506071,.F.); +#506078 = CYLINDRICAL_SURFACE('',#506079,1.35); +#506079 = AXIS2_PLACEMENT_3D('',#506080,#506081,#506082); +#506080 = CARTESIAN_POINT('',(152.,-156.5,-4.6E-02)); +#506081 = DIRECTION('',(-0.,-0.,-1.)); +#506082 = DIRECTION('',(-0.,-1.,0.)); +#506083 = ADVANCED_FACE('',(#506084),#506095,.F.); +#506084 = FACE_BOUND('',#506085,.T.); +#506085 = EDGE_LOOP('',(#506086,#506087,#506093,#506094)); +#506086 = ORIENTED_EDGE('',*,*,#504210,.T.); +#506087 = ORIENTED_EDGE('',*,*,#506088,.T.); +#506088 = EDGE_CURVE('',#504211,#505010,#506089,.T.); +#506089 = LINE('',#506090,#506091); +#506090 = CARTESIAN_POINT('',(138.,-127.96,-4.6E-02)); +#506091 = VECTOR('',#506092,1.); +#506092 = DIRECTION('',(0.,0.,1.)); +#506093 = ORIENTED_EDGE('',*,*,#505009,.F.); +#506094 = ORIENTED_EDGE('',*,*,#506088,.F.); +#506095 = CYLINDRICAL_SURFACE('',#506096,0.46); +#506096 = AXIS2_PLACEMENT_3D('',#506097,#506098,#506099); +#506097 = CARTESIAN_POINT('',(138.,-127.5,-4.6E-02)); +#506098 = DIRECTION('',(-0.,-0.,-1.)); +#506099 = DIRECTION('',(-0.,-1.,0.)); +#506100 = ADVANCED_FACE('',(#506101),#506112,.F.); +#506101 = FACE_BOUND('',#506102,.T.); +#506102 = EDGE_LOOP('',(#506103,#506104,#506110,#506111)); +#506103 = ORIENTED_EDGE('',*,*,#504221,.T.); +#506104 = ORIENTED_EDGE('',*,*,#506105,.T.); +#506105 = EDGE_CURVE('',#504222,#505021,#506106,.T.); +#506106 = LINE('',#506107,#506108); +#506107 = CARTESIAN_POINT('',(140.,-127.96,-4.6E-02)); +#506108 = VECTOR('',#506109,1.); +#506109 = DIRECTION('',(0.,0.,1.)); +#506110 = ORIENTED_EDGE('',*,*,#505020,.F.); +#506111 = ORIENTED_EDGE('',*,*,#506105,.F.); +#506112 = CYLINDRICAL_SURFACE('',#506113,0.46); +#506113 = AXIS2_PLACEMENT_3D('',#506114,#506115,#506116); +#506114 = CARTESIAN_POINT('',(140.,-127.5,-4.6E-02)); +#506115 = DIRECTION('',(-0.,-0.,-1.)); +#506116 = DIRECTION('',(-0.,-1.,0.)); +#506117 = ADVANCED_FACE('',(#506118),#506129,.F.); +#506118 = FACE_BOUND('',#506119,.T.); +#506119 = EDGE_LOOP('',(#506120,#506121,#506127,#506128)); +#506120 = ORIENTED_EDGE('',*,*,#504232,.T.); +#506121 = ORIENTED_EDGE('',*,*,#506122,.T.); +#506122 = EDGE_CURVE('',#504233,#505032,#506123,.T.); +#506123 = LINE('',#506124,#506125); +#506124 = CARTESIAN_POINT('',(142.,-127.96,-4.6E-02)); +#506125 = VECTOR('',#506126,1.); +#506126 = DIRECTION('',(0.,0.,1.)); +#506127 = ORIENTED_EDGE('',*,*,#505031,.F.); +#506128 = ORIENTED_EDGE('',*,*,#506122,.F.); +#506129 = CYLINDRICAL_SURFACE('',#506130,0.46); +#506130 = AXIS2_PLACEMENT_3D('',#506131,#506132,#506133); +#506131 = CARTESIAN_POINT('',(142.,-127.5,-4.6E-02)); +#506132 = DIRECTION('',(-0.,-0.,-1.)); +#506133 = DIRECTION('',(-0.,-1.,0.)); +#506134 = ADVANCED_FACE('',(#506135),#506146,.F.); +#506135 = FACE_BOUND('',#506136,.T.); +#506136 = EDGE_LOOP('',(#506137,#506138,#506144,#506145)); +#506137 = ORIENTED_EDGE('',*,*,#504243,.T.); +#506138 = ORIENTED_EDGE('',*,*,#506139,.T.); +#506139 = EDGE_CURVE('',#504244,#505043,#506140,.T.); +#506140 = LINE('',#506141,#506142); +#506141 = CARTESIAN_POINT('',(121.75,-103.1,-4.6E-02)); +#506142 = VECTOR('',#506143,1.); +#506143 = DIRECTION('',(0.,0.,1.)); +#506144 = ORIENTED_EDGE('',*,*,#505042,.F.); +#506145 = ORIENTED_EDGE('',*,*,#506139,.F.); +#506146 = CYLINDRICAL_SURFACE('',#506147,0.45); +#506147 = AXIS2_PLACEMENT_3D('',#506148,#506149,#506150); +#506148 = CARTESIAN_POINT('',(121.75,-102.65,-4.6E-02)); +#506149 = DIRECTION('',(-0.,-0.,-1.)); +#506150 = DIRECTION('',(-0.,-1.,0.)); +#506151 = ADVANCED_FACE('',(#506152),#506163,.F.); +#506152 = FACE_BOUND('',#506153,.T.); +#506153 = EDGE_LOOP('',(#506154,#506155,#506161,#506162)); +#506154 = ORIENTED_EDGE('',*,*,#504254,.T.); +#506155 = ORIENTED_EDGE('',*,*,#506156,.T.); +#506156 = EDGE_CURVE('',#504255,#505054,#506157,.T.); +#506157 = LINE('',#506158,#506159); +#506158 = CARTESIAN_POINT('',(121.75,-98.85,-4.6E-02)); +#506159 = VECTOR('',#506160,1.); +#506160 = DIRECTION('',(0.,0.,1.)); +#506161 = ORIENTED_EDGE('',*,*,#505053,.F.); +#506162 = ORIENTED_EDGE('',*,*,#506156,.F.); +#506163 = CYLINDRICAL_SURFACE('',#506164,0.45); +#506164 = AXIS2_PLACEMENT_3D('',#506165,#506166,#506167); +#506165 = CARTESIAN_POINT('',(121.75,-98.4,-4.6E-02)); +#506166 = DIRECTION('',(-0.,-0.,-1.)); +#506167 = DIRECTION('',(-0.,-1.,0.)); +#506168 = ADVANCED_FACE('',(#506169),#506180,.F.); +#506169 = FACE_BOUND('',#506170,.T.); +#506170 = EDGE_LOOP('',(#506171,#506172,#506178,#506179)); +#506171 = ORIENTED_EDGE('',*,*,#504265,.T.); +#506172 = ORIENTED_EDGE('',*,*,#506173,.T.); +#506173 = EDGE_CURVE('',#504266,#505065,#506174,.T.); +#506174 = LINE('',#506175,#506176); +#506175 = CARTESIAN_POINT('',(121.75,-93.075,-4.6E-02)); +#506176 = VECTOR('',#506177,1.); +#506177 = DIRECTION('',(0.,0.,1.)); +#506178 = ORIENTED_EDGE('',*,*,#505064,.F.); +#506179 = ORIENTED_EDGE('',*,*,#506173,.F.); +#506180 = CYLINDRICAL_SURFACE('',#506181,0.45); +#506181 = AXIS2_PLACEMENT_3D('',#506182,#506183,#506184); +#506182 = CARTESIAN_POINT('',(121.75,-92.625,-4.6E-02)); +#506183 = DIRECTION('',(-0.,-0.,-1.)); +#506184 = DIRECTION('',(-0.,-1.,0.)); +#506185 = ADVANCED_FACE('',(#506186),#506197,.F.); +#506186 = FACE_BOUND('',#506187,.T.); +#506187 = EDGE_LOOP('',(#506188,#506189,#506195,#506196)); +#506188 = ORIENTED_EDGE('',*,*,#504276,.T.); +#506189 = ORIENTED_EDGE('',*,*,#506190,.T.); +#506190 = EDGE_CURVE('',#504277,#505076,#506191,.T.); +#506191 = LINE('',#506192,#506193); +#506192 = CARTESIAN_POINT('',(121.75,-88.825,-4.6E-02)); +#506193 = VECTOR('',#506194,1.); +#506194 = DIRECTION('',(0.,0.,1.)); +#506195 = ORIENTED_EDGE('',*,*,#505075,.F.); +#506196 = ORIENTED_EDGE('',*,*,#506190,.F.); +#506197 = CYLINDRICAL_SURFACE('',#506198,0.45); +#506198 = AXIS2_PLACEMENT_3D('',#506199,#506200,#506201); +#506199 = CARTESIAN_POINT('',(121.75,-88.375,-4.6E-02)); +#506200 = DIRECTION('',(-0.,-0.,-1.)); +#506201 = DIRECTION('',(-0.,-1.,0.)); +#506202 = ADVANCED_FACE('',(#506203),#506214,.F.); +#506203 = FACE_BOUND('',#506204,.T.); +#506204 = EDGE_LOOP('',(#506205,#506206,#506212,#506213)); +#506205 = ORIENTED_EDGE('',*,*,#504287,.T.); +#506206 = ORIENTED_EDGE('',*,*,#506207,.T.); +#506207 = EDGE_CURVE('',#504288,#505087,#506208,.T.); +#506208 = LINE('',#506209,#506210); +#506209 = CARTESIAN_POINT('',(131.175,-101.025,-4.6E-02)); +#506210 = VECTOR('',#506211,1.); +#506211 = DIRECTION('',(0.,0.,1.)); +#506212 = ORIENTED_EDGE('',*,*,#505086,.F.); +#506213 = ORIENTED_EDGE('',*,*,#506207,.F.); +#506214 = CYLINDRICAL_SURFACE('',#506215,0.775); +#506215 = AXIS2_PLACEMENT_3D('',#506216,#506217,#506218); +#506216 = CARTESIAN_POINT('',(131.175,-100.25,-4.6E-02)); +#506217 = DIRECTION('',(-0.,-0.,-1.)); +#506218 = DIRECTION('',(-0.,-1.,0.)); +#506219 = ADVANCED_FACE('',(#506220),#506231,.F.); +#506220 = FACE_BOUND('',#506221,.T.); +#506221 = EDGE_LOOP('',(#506222,#506223,#506229,#506230)); +#506222 = ORIENTED_EDGE('',*,*,#504298,.T.); +#506223 = ORIENTED_EDGE('',*,*,#506224,.T.); +#506224 = EDGE_CURVE('',#504299,#505098,#506225,.T.); +#506225 = LINE('',#506226,#506227); +#506226 = CARTESIAN_POINT('',(134.25,-106.125,-4.6E-02)); +#506227 = VECTOR('',#506228,1.); +#506228 = DIRECTION('',(0.,0.,1.)); +#506229 = ORIENTED_EDGE('',*,*,#505097,.F.); +#506230 = ORIENTED_EDGE('',*,*,#506224,.F.); +#506231 = CYLINDRICAL_SURFACE('',#506232,0.625); +#506232 = AXIS2_PLACEMENT_3D('',#506233,#506234,#506235); +#506233 = CARTESIAN_POINT('',(134.25,-105.5,-4.6E-02)); +#506234 = DIRECTION('',(-0.,-0.,-1.)); +#506235 = DIRECTION('',(-0.,-1.,0.)); +#506236 = ADVANCED_FACE('',(#506237),#506248,.F.); +#506237 = FACE_BOUND('',#506238,.T.); +#506238 = EDGE_LOOP('',(#506239,#506240,#506246,#506247)); +#506239 = ORIENTED_EDGE('',*,*,#504309,.T.); +#506240 = ORIENTED_EDGE('',*,*,#506241,.T.); +#506241 = EDGE_CURVE('',#504310,#505109,#506242,.T.); +#506242 = LINE('',#506243,#506244); +#506243 = CARTESIAN_POINT('',(134.25,-101.625,-4.6E-02)); +#506244 = VECTOR('',#506245,1.); +#506245 = DIRECTION('',(0.,0.,1.)); +#506246 = ORIENTED_EDGE('',*,*,#505108,.F.); +#506247 = ORIENTED_EDGE('',*,*,#506241,.F.); +#506248 = CYLINDRICAL_SURFACE('',#506249,0.625); +#506249 = AXIS2_PLACEMENT_3D('',#506250,#506251,#506252); +#506250 = CARTESIAN_POINT('',(134.25,-101.,-4.6E-02)); +#506251 = DIRECTION('',(-0.,-0.,-1.)); +#506252 = DIRECTION('',(-0.,-1.,0.)); +#506253 = ADVANCED_FACE('',(#506254),#506265,.F.); +#506254 = FACE_BOUND('',#506255,.T.); +#506255 = EDGE_LOOP('',(#506256,#506257,#506263,#506264)); +#506256 = ORIENTED_EDGE('',*,*,#504320,.T.); +#506257 = ORIENTED_EDGE('',*,*,#506258,.T.); +#506258 = EDGE_CURVE('',#504321,#505120,#506259,.T.); +#506259 = LINE('',#506260,#506261); +#506260 = CARTESIAN_POINT('',(131.175,-91.025,-4.6E-02)); +#506261 = VECTOR('',#506262,1.); +#506262 = DIRECTION('',(0.,0.,1.)); +#506263 = ORIENTED_EDGE('',*,*,#505119,.F.); +#506264 = ORIENTED_EDGE('',*,*,#506258,.F.); +#506265 = CYLINDRICAL_SURFACE('',#506266,0.775); +#506266 = AXIS2_PLACEMENT_3D('',#506267,#506268,#506269); +#506267 = CARTESIAN_POINT('',(131.175,-90.25,-4.6E-02)); +#506268 = DIRECTION('',(-0.,-0.,-1.)); +#506269 = DIRECTION('',(-0.,-1.,0.)); +#506270 = ADVANCED_FACE('',(#506271),#506282,.F.); +#506271 = FACE_BOUND('',#506272,.T.); +#506272 = EDGE_LOOP('',(#506273,#506274,#506280,#506281)); +#506273 = ORIENTED_EDGE('',*,*,#504331,.T.); +#506274 = ORIENTED_EDGE('',*,*,#506275,.T.); +#506275 = EDGE_CURVE('',#504332,#505131,#506276,.T.); +#506276 = LINE('',#506277,#506278); +#506277 = CARTESIAN_POINT('',(135.,-87.045,-4.6E-02)); +#506278 = VECTOR('',#506279,1.); +#506279 = DIRECTION('',(0.,0.,1.)); +#506280 = ORIENTED_EDGE('',*,*,#505130,.F.); +#506281 = ORIENTED_EDGE('',*,*,#506275,.F.); +#506282 = CYLINDRICAL_SURFACE('',#506283,0.525); +#506283 = AXIS2_PLACEMENT_3D('',#506284,#506285,#506286); +#506284 = CARTESIAN_POINT('',(135.,-86.52,-4.6E-02)); +#506285 = DIRECTION('',(-0.,-0.,-1.)); +#506286 = DIRECTION('',(-0.,-1.,0.)); +#506287 = ADVANCED_FACE('',(#506288),#506299,.F.); +#506288 = FACE_BOUND('',#506289,.T.); +#506289 = EDGE_LOOP('',(#506290,#506291,#506297,#506298)); +#506290 = ORIENTED_EDGE('',*,*,#504342,.T.); +#506291 = ORIENTED_EDGE('',*,*,#506292,.T.); +#506292 = EDGE_CURVE('',#504343,#505142,#506293,.T.); +#506293 = LINE('',#506294,#506295); +#506294 = CARTESIAN_POINT('',(137.5,-87.045,-4.6E-02)); +#506295 = VECTOR('',#506296,1.); +#506296 = DIRECTION('',(0.,0.,1.)); +#506297 = ORIENTED_EDGE('',*,*,#505141,.F.); +#506298 = ORIENTED_EDGE('',*,*,#506292,.F.); +#506299 = CYLINDRICAL_SURFACE('',#506300,0.525); +#506300 = AXIS2_PLACEMENT_3D('',#506301,#506302,#506303); +#506301 = CARTESIAN_POINT('',(137.5,-86.52,-4.6E-02)); +#506302 = DIRECTION('',(-0.,-0.,-1.)); +#506303 = DIRECTION('',(-0.,-1.,0.)); +#506304 = ADVANCED_FACE('',(#506305),#506316,.F.); +#506305 = FACE_BOUND('',#506306,.T.); +#506306 = EDGE_LOOP('',(#506307,#506308,#506314,#506315)); +#506307 = ORIENTED_EDGE('',*,*,#504353,.T.); +#506308 = ORIENTED_EDGE('',*,*,#506309,.T.); +#506309 = EDGE_CURVE('',#504354,#505153,#506310,.T.); +#506310 = LINE('',#506311,#506312); +#506311 = CARTESIAN_POINT('',(123.3,-70.55,-4.6E-02)); +#506312 = VECTOR('',#506313,1.); +#506313 = DIRECTION('',(0.,0.,1.)); +#506314 = ORIENTED_EDGE('',*,*,#505152,.F.); +#506315 = ORIENTED_EDGE('',*,*,#506309,.F.); +#506316 = CYLINDRICAL_SURFACE('',#506317,1.35); +#506317 = AXIS2_PLACEMENT_3D('',#506318,#506319,#506320); +#506318 = CARTESIAN_POINT('',(123.3,-69.2,-4.6E-02)); +#506319 = DIRECTION('',(-0.,-0.,-1.)); +#506320 = DIRECTION('',(-1.05265590483E-14,-1.,0.)); +#506321 = ADVANCED_FACE('',(#506322),#506333,.F.); +#506322 = FACE_BOUND('',#506323,.T.); +#506323 = EDGE_LOOP('',(#506324,#506325,#506331,#506332)); +#506324 = ORIENTED_EDGE('',*,*,#504364,.T.); +#506325 = ORIENTED_EDGE('',*,*,#506326,.T.); +#506326 = EDGE_CURVE('',#504365,#505164,#506327,.T.); +#506327 = LINE('',#506328,#506329); +#506328 = CARTESIAN_POINT('',(121.525,-62.2,-4.6E-02)); +#506329 = VECTOR('',#506330,1.); +#506330 = DIRECTION('',(0.,0.,1.)); +#506331 = ORIENTED_EDGE('',*,*,#505163,.F.); +#506332 = ORIENTED_EDGE('',*,*,#506326,.F.); +#506333 = CYLINDRICAL_SURFACE('',#506334,0.45); +#506334 = AXIS2_PLACEMENT_3D('',#506335,#506336,#506337); +#506335 = CARTESIAN_POINT('',(121.525,-61.75,-4.6E-02)); +#506336 = DIRECTION('',(-0.,-0.,-1.)); +#506337 = DIRECTION('',(-0.,-1.,0.)); +#506338 = ADVANCED_FACE('',(#506339),#506350,.F.); +#506339 = FACE_BOUND('',#506340,.T.); +#506340 = EDGE_LOOP('',(#506341,#506342,#506348,#506349)); +#506341 = ORIENTED_EDGE('',*,*,#504375,.T.); +#506342 = ORIENTED_EDGE('',*,*,#506343,.T.); +#506343 = EDGE_CURVE('',#504376,#505175,#506344,.T.); +#506344 = LINE('',#506345,#506346); +#506345 = CARTESIAN_POINT('',(125.775,-62.2,-4.6E-02)); +#506346 = VECTOR('',#506347,1.); +#506347 = DIRECTION('',(0.,0.,1.)); +#506348 = ORIENTED_EDGE('',*,*,#505174,.F.); +#506349 = ORIENTED_EDGE('',*,*,#506343,.F.); +#506350 = CYLINDRICAL_SURFACE('',#506351,0.45); +#506351 = AXIS2_PLACEMENT_3D('',#506352,#506353,#506354); +#506352 = CARTESIAN_POINT('',(125.775,-61.75,-4.6E-02)); +#506353 = DIRECTION('',(-0.,-0.,-1.)); +#506354 = DIRECTION('',(-0.,-1.,0.)); +#506355 = ADVANCED_FACE('',(#506356),#506367,.F.); +#506356 = FACE_BOUND('',#506357,.T.); +#506357 = EDGE_LOOP('',(#506358,#506359,#506365,#506366)); +#506358 = ORIENTED_EDGE('',*,*,#504386,.T.); +#506359 = ORIENTED_EDGE('',*,*,#506360,.T.); +#506360 = EDGE_CURVE('',#504387,#505186,#506361,.T.); +#506361 = LINE('',#506362,#506363); +#506362 = CARTESIAN_POINT('',(140.75,-106.125,-4.6E-02)); +#506363 = VECTOR('',#506364,1.); +#506364 = DIRECTION('',(0.,0.,1.)); +#506365 = ORIENTED_EDGE('',*,*,#505185,.F.); +#506366 = ORIENTED_EDGE('',*,*,#506360,.F.); +#506367 = CYLINDRICAL_SURFACE('',#506368,0.625); +#506368 = AXIS2_PLACEMENT_3D('',#506369,#506370,#506371); +#506369 = CARTESIAN_POINT('',(140.75,-105.5,-4.6E-02)); +#506370 = DIRECTION('',(-0.,-0.,-1.)); +#506371 = DIRECTION('',(-0.,-1.,0.)); +#506372 = ADVANCED_FACE('',(#506373),#506384,.F.); +#506373 = FACE_BOUND('',#506374,.T.); +#506374 = EDGE_LOOP('',(#506375,#506376,#506382,#506383)); +#506375 = ORIENTED_EDGE('',*,*,#504397,.T.); +#506376 = ORIENTED_EDGE('',*,*,#506377,.T.); +#506377 = EDGE_CURVE('',#504398,#505197,#506378,.T.); +#506378 = LINE('',#506379,#506380); +#506379 = CARTESIAN_POINT('',(140.75,-101.625,-4.6E-02)); +#506380 = VECTOR('',#506381,1.); +#506381 = DIRECTION('',(0.,0.,1.)); +#506382 = ORIENTED_EDGE('',*,*,#505196,.F.); +#506383 = ORIENTED_EDGE('',*,*,#506377,.F.); +#506384 = CYLINDRICAL_SURFACE('',#506385,0.625); +#506385 = AXIS2_PLACEMENT_3D('',#506386,#506387,#506388); +#506386 = CARTESIAN_POINT('',(140.75,-101.,-4.6E-02)); +#506387 = DIRECTION('',(-0.,-0.,-1.)); +#506388 = DIRECTION('',(-0.,-1.,0.)); +#506389 = ADVANCED_FACE('',(#506390),#506401,.F.); +#506390 = FACE_BOUND('',#506391,.T.); +#506391 = EDGE_LOOP('',(#506392,#506393,#506399,#506400)); +#506392 = ORIENTED_EDGE('',*,*,#504408,.T.); +#506393 = ORIENTED_EDGE('',*,*,#506394,.T.); +#506394 = EDGE_CURVE('',#504409,#505208,#506395,.T.); +#506395 = LINE('',#506396,#506397); +#506396 = CARTESIAN_POINT('',(143.825,-101.025,-4.6E-02)); +#506397 = VECTOR('',#506398,1.); +#506398 = DIRECTION('',(0.,0.,1.)); +#506399 = ORIENTED_EDGE('',*,*,#505207,.F.); +#506400 = ORIENTED_EDGE('',*,*,#506394,.F.); +#506401 = CYLINDRICAL_SURFACE('',#506402,0.775); +#506402 = AXIS2_PLACEMENT_3D('',#506403,#506404,#506405); +#506403 = CARTESIAN_POINT('',(143.825,-100.25,-4.6E-02)); +#506404 = DIRECTION('',(-0.,-0.,-1.)); +#506405 = DIRECTION('',(-0.,-1.,0.)); +#506406 = ADVANCED_FACE('',(#506407),#506418,.F.); +#506407 = FACE_BOUND('',#506408,.T.); +#506408 = EDGE_LOOP('',(#506409,#506410,#506416,#506417)); +#506409 = ORIENTED_EDGE('',*,*,#504419,.T.); +#506410 = ORIENTED_EDGE('',*,*,#506411,.T.); +#506411 = EDGE_CURVE('',#504420,#505219,#506412,.T.); +#506412 = LINE('',#506413,#506414); +#506413 = CARTESIAN_POINT('',(140.,-87.045,-4.6E-02)); +#506414 = VECTOR('',#506415,1.); +#506415 = DIRECTION('',(0.,0.,1.)); +#506416 = ORIENTED_EDGE('',*,*,#505218,.F.); +#506417 = ORIENTED_EDGE('',*,*,#506411,.F.); +#506418 = CYLINDRICAL_SURFACE('',#506419,0.525); +#506419 = AXIS2_PLACEMENT_3D('',#506420,#506421,#506422); +#506420 = CARTESIAN_POINT('',(140.,-86.52,-4.6E-02)); +#506421 = DIRECTION('',(-0.,-0.,-1.)); +#506422 = DIRECTION('',(-0.,-1.,0.)); +#506423 = ADVANCED_FACE('',(#506424),#506435,.F.); +#506424 = FACE_BOUND('',#506425,.T.); +#506425 = EDGE_LOOP('',(#506426,#506427,#506433,#506434)); +#506426 = ORIENTED_EDGE('',*,*,#504430,.T.); +#506427 = ORIENTED_EDGE('',*,*,#506428,.T.); +#506428 = EDGE_CURVE('',#504431,#505230,#506429,.T.); +#506429 = LINE('',#506430,#506431); +#506430 = CARTESIAN_POINT('',(143.825,-91.025,-4.6E-02)); +#506431 = VECTOR('',#506432,1.); +#506432 = DIRECTION('',(0.,0.,1.)); +#506433 = ORIENTED_EDGE('',*,*,#505229,.F.); +#506434 = ORIENTED_EDGE('',*,*,#506428,.F.); +#506435 = CYLINDRICAL_SURFACE('',#506436,0.775); +#506436 = AXIS2_PLACEMENT_3D('',#506437,#506438,#506439); +#506437 = CARTESIAN_POINT('',(143.825,-90.25,-4.6E-02)); +#506438 = DIRECTION('',(-0.,-0.,-1.)); +#506439 = DIRECTION('',(-0.,-1.,0.)); +#506440 = ADVANCED_FACE('',(#506441),#506452,.F.); +#506441 = FACE_BOUND('',#506442,.T.); +#506442 = EDGE_LOOP('',(#506443,#506444,#506450,#506451)); +#506443 = ORIENTED_EDGE('',*,*,#504441,.T.); +#506444 = ORIENTED_EDGE('',*,*,#506445,.T.); +#506445 = EDGE_CURVE('',#504442,#505241,#506446,.T.); +#506446 = LINE('',#506447,#506448); +#506447 = CARTESIAN_POINT('',(153.2,-103.1,-4.6E-02)); +#506448 = VECTOR('',#506449,1.); +#506449 = DIRECTION('',(0.,0.,1.)); +#506450 = ORIENTED_EDGE('',*,*,#505240,.F.); +#506451 = ORIENTED_EDGE('',*,*,#506445,.F.); +#506452 = CYLINDRICAL_SURFACE('',#506453,0.45); +#506453 = AXIS2_PLACEMENT_3D('',#506454,#506455,#506456); +#506454 = CARTESIAN_POINT('',(153.2,-102.65,-4.6E-02)); +#506455 = DIRECTION('',(-0.,-0.,-1.)); +#506456 = DIRECTION('',(-0.,-1.,0.)); +#506457 = ADVANCED_FACE('',(#506458),#506469,.F.); +#506458 = FACE_BOUND('',#506459,.T.); +#506459 = EDGE_LOOP('',(#506460,#506461,#506467,#506468)); +#506460 = ORIENTED_EDGE('',*,*,#504452,.T.); +#506461 = ORIENTED_EDGE('',*,*,#506462,.T.); +#506462 = EDGE_CURVE('',#504453,#505252,#506463,.T.); +#506463 = LINE('',#506464,#506465); +#506464 = CARTESIAN_POINT('',(153.2,-98.85,-4.6E-02)); +#506465 = VECTOR('',#506466,1.); +#506466 = DIRECTION('',(0.,0.,1.)); +#506467 = ORIENTED_EDGE('',*,*,#505251,.F.); +#506468 = ORIENTED_EDGE('',*,*,#506462,.F.); +#506469 = CYLINDRICAL_SURFACE('',#506470,0.45); +#506470 = AXIS2_PLACEMENT_3D('',#506471,#506472,#506473); +#506471 = CARTESIAN_POINT('',(153.2,-98.4,-4.6E-02)); +#506472 = DIRECTION('',(-0.,-0.,-1.)); +#506473 = DIRECTION('',(-0.,-1.,0.)); +#506474 = ADVANCED_FACE('',(#506475),#506486,.F.); +#506475 = FACE_BOUND('',#506476,.T.); +#506476 = EDGE_LOOP('',(#506477,#506478,#506484,#506485)); +#506477 = ORIENTED_EDGE('',*,*,#504463,.T.); +#506478 = ORIENTED_EDGE('',*,*,#506479,.T.); +#506479 = EDGE_CURVE('',#504464,#505263,#506480,.T.); +#506480 = LINE('',#506481,#506482); +#506481 = CARTESIAN_POINT('',(146.23,-98.275,-4.6E-02)); +#506482 = VECTOR('',#506483,1.); +#506483 = DIRECTION('',(0.,0.,1.)); +#506484 = ORIENTED_EDGE('',*,*,#505262,.F.); +#506485 = ORIENTED_EDGE('',*,*,#506479,.F.); +#506486 = CYLINDRICAL_SURFACE('',#506487,0.525); +#506487 = AXIS2_PLACEMENT_3D('',#506488,#506489,#506490); +#506488 = CARTESIAN_POINT('',(146.23,-97.75,-4.6E-02)); +#506489 = DIRECTION('',(-0.,-0.,-1.)); +#506490 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#506491 = ADVANCED_FACE('',(#506492),#506503,.F.); +#506492 = FACE_BOUND('',#506493,.T.); +#506493 = EDGE_LOOP('',(#506494,#506495,#506501,#506502)); +#506494 = ORIENTED_EDGE('',*,*,#504474,.T.); +#506495 = ORIENTED_EDGE('',*,*,#506496,.T.); +#506496 = EDGE_CURVE('',#504475,#505274,#506497,.T.); +#506497 = LINE('',#506498,#506499); +#506498 = CARTESIAN_POINT('',(146.23,-95.775,-4.6E-02)); +#506499 = VECTOR('',#506500,1.); +#506500 = DIRECTION('',(0.,0.,1.)); +#506501 = ORIENTED_EDGE('',*,*,#505273,.F.); +#506502 = ORIENTED_EDGE('',*,*,#506496,.F.); +#506503 = CYLINDRICAL_SURFACE('',#506504,0.525); +#506504 = AXIS2_PLACEMENT_3D('',#506505,#506506,#506507); +#506505 = CARTESIAN_POINT('',(146.23,-95.25,-4.6E-02)); +#506506 = DIRECTION('',(-0.,-0.,-1.)); +#506507 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#506508 = ADVANCED_FACE('',(#506509),#506520,.F.); +#506509 = FACE_BOUND('',#506510,.T.); +#506510 = EDGE_LOOP('',(#506511,#506512,#506518,#506519)); +#506511 = ORIENTED_EDGE('',*,*,#504485,.T.); +#506512 = ORIENTED_EDGE('',*,*,#506513,.T.); +#506513 = EDGE_CURVE('',#504486,#505285,#506514,.T.); +#506514 = LINE('',#506515,#506516); +#506515 = CARTESIAN_POINT('',(146.23,-93.275,-4.6E-02)); +#506516 = VECTOR('',#506517,1.); +#506517 = DIRECTION('',(0.,0.,1.)); +#506518 = ORIENTED_EDGE('',*,*,#505284,.F.); +#506519 = ORIENTED_EDGE('',*,*,#506513,.F.); +#506520 = CYLINDRICAL_SURFACE('',#506521,0.525); +#506521 = AXIS2_PLACEMENT_3D('',#506522,#506523,#506524); +#506522 = CARTESIAN_POINT('',(146.23,-92.75,-4.6E-02)); +#506523 = DIRECTION('',(-0.,-0.,-1.)); +#506524 = DIRECTION('',(-5.413658939125E-14,-1.,0.)); +#506525 = ADVANCED_FACE('',(#506526),#506537,.F.); +#506526 = FACE_BOUND('',#506527,.T.); +#506527 = EDGE_LOOP('',(#506528,#506529,#506535,#506536)); +#506528 = ORIENTED_EDGE('',*,*,#504496,.T.); +#506529 = ORIENTED_EDGE('',*,*,#506530,.T.); +#506530 = EDGE_CURVE('',#504497,#505296,#506531,.T.); +#506531 = LINE('',#506532,#506533); +#506532 = CARTESIAN_POINT('',(153.2,-93.075,-4.6E-02)); +#506533 = VECTOR('',#506534,1.); +#506534 = DIRECTION('',(0.,0.,1.)); +#506535 = ORIENTED_EDGE('',*,*,#505295,.F.); +#506536 = ORIENTED_EDGE('',*,*,#506530,.F.); +#506537 = CYLINDRICAL_SURFACE('',#506538,0.45); +#506538 = AXIS2_PLACEMENT_3D('',#506539,#506540,#506541); +#506539 = CARTESIAN_POINT('',(153.2,-92.625,-4.6E-02)); +#506540 = DIRECTION('',(-0.,-0.,-1.)); +#506541 = DIRECTION('',(-0.,-1.,0.)); +#506542 = ADVANCED_FACE('',(#506543),#506554,.F.); +#506543 = FACE_BOUND('',#506544,.T.); +#506544 = EDGE_LOOP('',(#506545,#506546,#506552,#506553)); +#506545 = ORIENTED_EDGE('',*,*,#504507,.T.); +#506546 = ORIENTED_EDGE('',*,*,#506547,.T.); +#506547 = EDGE_CURVE('',#504508,#505307,#506548,.T.); +#506548 = LINE('',#506549,#506550); +#506549 = CARTESIAN_POINT('',(153.2,-88.825,-4.6E-02)); +#506550 = VECTOR('',#506551,1.); +#506551 = DIRECTION('',(0.,0.,1.)); +#506552 = ORIENTED_EDGE('',*,*,#505306,.F.); +#506553 = ORIENTED_EDGE('',*,*,#506547,.F.); +#506554 = CYLINDRICAL_SURFACE('',#506555,0.45); +#506555 = AXIS2_PLACEMENT_3D('',#506556,#506557,#506558); +#506556 = CARTESIAN_POINT('',(153.2,-88.375,-4.6E-02)); +#506557 = DIRECTION('',(-0.,-0.,-1.)); +#506558 = DIRECTION('',(-0.,-1.,0.)); +#506559 = ADVANCED_FACE('',(#506560),#506571,.F.); +#506560 = FACE_BOUND('',#506561,.T.); +#506561 = EDGE_LOOP('',(#506562,#506563,#506569,#506570)); +#506562 = ORIENTED_EDGE('',*,*,#504518,.T.); +#506563 = ORIENTED_EDGE('',*,*,#506564,.T.); +#506564 = EDGE_CURVE('',#504519,#505318,#506565,.T.); +#506565 = LINE('',#506566,#506567); +#506566 = CARTESIAN_POINT('',(150.5,-77.875,-4.6E-02)); +#506567 = VECTOR('',#506568,1.); +#506568 = DIRECTION('',(0.,0.,1.)); +#506569 = ORIENTED_EDGE('',*,*,#505317,.F.); +#506570 = ORIENTED_EDGE('',*,*,#506564,.F.); +#506571 = CYLINDRICAL_SURFACE('',#506572,0.375); +#506572 = AXIS2_PLACEMENT_3D('',#506573,#506574,#506575); +#506573 = CARTESIAN_POINT('',(150.5,-77.5,-4.6E-02)); +#506574 = DIRECTION('',(-0.,-0.,-1.)); +#506575 = DIRECTION('',(-0.,-1.,0.)); +#506576 = ADVANCED_FACE('',(#506577),#506588,.F.); +#506577 = FACE_BOUND('',#506578,.T.); +#506578 = EDGE_LOOP('',(#506579,#506580,#506586,#506587)); +#506579 = ORIENTED_EDGE('',*,*,#504529,.T.); +#506580 = ORIENTED_EDGE('',*,*,#506581,.T.); +#506581 = EDGE_CURVE('',#504530,#505329,#506582,.T.); +#506582 = LINE('',#506583,#506584); +#506583 = CARTESIAN_POINT('',(152.5,-77.875,-4.6E-02)); +#506584 = VECTOR('',#506585,1.); +#506585 = DIRECTION('',(0.,0.,1.)); +#506586 = ORIENTED_EDGE('',*,*,#505328,.F.); +#506587 = ORIENTED_EDGE('',*,*,#506581,.F.); +#506588 = CYLINDRICAL_SURFACE('',#506589,0.375); +#506589 = AXIS2_PLACEMENT_3D('',#506590,#506591,#506592); +#506590 = CARTESIAN_POINT('',(152.5,-77.5,-4.6E-02)); +#506591 = DIRECTION('',(-0.,-0.,-1.)); +#506592 = DIRECTION('',(-0.,-1.,0.)); +#506593 = ADVANCED_FACE('',(#506594),#506605,.F.); +#506594 = FACE_BOUND('',#506595,.T.); +#506595 = EDGE_LOOP('',(#506596,#506597,#506603,#506604)); +#506596 = ORIENTED_EDGE('',*,*,#504540,.T.); +#506597 = ORIENTED_EDGE('',*,*,#506598,.T.); +#506598 = EDGE_CURVE('',#504541,#505340,#506599,.T.); +#506599 = LINE('',#506600,#506601); +#506600 = CARTESIAN_POINT('',(149.225,-62.2,-4.6E-02)); +#506601 = VECTOR('',#506602,1.); +#506602 = DIRECTION('',(0.,0.,1.)); +#506603 = ORIENTED_EDGE('',*,*,#505339,.F.); +#506604 = ORIENTED_EDGE('',*,*,#506598,.F.); +#506605 = CYLINDRICAL_SURFACE('',#506606,0.45); +#506606 = AXIS2_PLACEMENT_3D('',#506607,#506608,#506609); +#506607 = CARTESIAN_POINT('',(149.225,-61.75,-4.6E-02)); +#506608 = DIRECTION('',(-0.,-0.,-1.)); +#506609 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#506610 = ADVANCED_FACE('',(#506611),#506622,.F.); +#506611 = FACE_BOUND('',#506612,.T.); +#506612 = EDGE_LOOP('',(#506613,#506614,#506620,#506621)); +#506613 = ORIENTED_EDGE('',*,*,#504551,.T.); +#506614 = ORIENTED_EDGE('',*,*,#506615,.T.); +#506615 = EDGE_CURVE('',#504552,#505351,#506616,.T.); +#506616 = LINE('',#506617,#506618); +#506617 = CARTESIAN_POINT('',(151.7,-70.55,-4.6E-02)); +#506618 = VECTOR('',#506619,1.); +#506619 = DIRECTION('',(0.,0.,1.)); +#506620 = ORIENTED_EDGE('',*,*,#505350,.F.); +#506621 = ORIENTED_EDGE('',*,*,#506615,.F.); +#506622 = CYLINDRICAL_SURFACE('',#506623,1.35); +#506623 = AXIS2_PLACEMENT_3D('',#506624,#506625,#506626); +#506624 = CARTESIAN_POINT('',(151.7,-69.2,-4.6E-02)); +#506625 = DIRECTION('',(-0.,-0.,-1.)); +#506626 = DIRECTION('',(-0.,-1.,0.)); +#506627 = ADVANCED_FACE('',(#506628),#506639,.F.); +#506628 = FACE_BOUND('',#506629,.T.); +#506629 = EDGE_LOOP('',(#506630,#506631,#506637,#506638)); +#506630 = ORIENTED_EDGE('',*,*,#504562,.T.); +#506631 = ORIENTED_EDGE('',*,*,#506632,.T.); +#506632 = EDGE_CURVE('',#504563,#505362,#506633,.T.); +#506633 = LINE('',#506634,#506635); +#506634 = CARTESIAN_POINT('',(153.475,-62.2,-4.6E-02)); +#506635 = VECTOR('',#506636,1.); +#506636 = DIRECTION('',(0.,0.,1.)); +#506637 = ORIENTED_EDGE('',*,*,#505361,.F.); +#506638 = ORIENTED_EDGE('',*,*,#506632,.F.); +#506639 = CYLINDRICAL_SURFACE('',#506640,0.45); +#506640 = AXIS2_PLACEMENT_3D('',#506641,#506642,#506643); +#506641 = CARTESIAN_POINT('',(153.475,-61.75,-4.6E-02)); +#506642 = DIRECTION('',(-0.,-0.,-1.)); +#506643 = DIRECTION('',(-6.315935428979E-14,-1.,0.)); +#506644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#506648)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#506645,#506646,#506647)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#506645 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#506646 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#506647 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#506648 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#506645, + 'distance_accuracy_value','confusion accuracy'); +#506649 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#506650,#506652); +#506650 = ( REPRESENTATION_RELATIONSHIP('','',#503671,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#506651) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#506651 = ITEM_DEFINED_TRANSFORMATION('','',#11,#383); +#506652 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #506653); +#506653 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('119','=>[0:1:1:58]','',#5, + #503666,$); +#506654 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#503668)); +#506655 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #506656,#506664,#506672,#506679,#506686,#506693,#506701,#506708, + #506715,#506722,#506729,#506736,#506743,#506750,#506757,#506764, + #506771,#506778,#506785,#506792,#506799,#506806,#506813,#506820, + #506827,#506834,#506841,#506848,#506855,#506862,#506869,#506876, + #506883,#506890,#506897,#506904,#506911,#506918,#506925,#506932, + #506939,#506946,#506953,#506960,#506967,#506974,#506981,#506988, + #506995,#507002,#507009,#507016,#507023,#507030,#507037,#507044, + #507051,#507058,#507065,#507072,#507079,#507086,#507093,#507100, + #507107,#507114,#507121,#507128,#507135,#507142,#507149,#507156, + #507163,#507170,#507177,#507184,#507191,#507198,#507205,#507212, + #507219,#507226,#507233,#507240,#507247,#507254,#507261,#507268, + #507275,#507282,#507289,#507296,#507303,#507310,#507317,#507324, + #507331,#507338,#507345,#507352,#507359,#507366,#507373,#507380, + #507387,#507394,#507401,#507408,#507415,#507422,#507429,#507436, + #507443,#507450,#507457,#507464,#507471,#507478,#507485,#507492, + #507499,#507506,#507513,#507520,#507527,#507534,#507541,#507548, + #507555,#507562,#507569,#507576,#507583,#507590,#507597,#507604, + #507611,#507618,#507625,#507632,#507639,#507646,#507653,#507660, + #507667,#507674,#507681,#507688,#507695,#507702,#507709,#507716, + #507723,#507730,#507737,#507744,#507751,#507758,#507765,#507772, + #507779,#507786,#507793,#507800,#507807,#507814,#507821,#507828, + #507835,#507842,#507849,#507856,#507863,#507870,#507877,#507884, + #507891,#507898,#507905,#507912,#507919,#507926,#507933,#507940, + #507947,#507954,#507961,#507968,#507975,#507982,#507989,#507996, + #508003,#508010,#508017,#508024,#508031,#508038,#508045,#508052, + #508059,#508066,#508073,#508080,#508087,#508094,#508101,#508108, + #508115,#508122,#508129,#508136,#508143,#508150,#508157,#508164, + #508171,#508178,#508185,#508192,#508199,#508206,#508213,#508220, + #508227,#508234,#508241,#508248,#508255,#508262,#508269,#508276, + #508283,#508290,#508297,#508304,#508311,#508318,#508325,#508332, + #508339,#508346,#508353,#508360,#508367,#508374,#508381,#508388, + #508395,#508402,#508409,#508416,#508423,#508430,#508437,#508444, + #508451,#508458,#508465,#508472,#508479,#508486,#508493,#508500, + #508507,#508514,#508521,#508528,#508535,#508542,#508549,#508556, + #508563,#508570,#508577,#508584,#508591,#508598,#508605,#508612, + #508619,#508626,#508633,#508640,#508647,#508654,#508661,#508668, + #508675,#508682,#508689,#508696,#508703,#508710,#508717,#508724, + #508731,#508738,#508745,#508752,#508759,#508766,#508773,#508780, + #508787,#508794,#508801,#508808,#508815,#508822,#508829,#508836, + #508843,#508850,#508857,#508864,#508871,#508878,#508885,#508892, + #508899,#508906,#508913,#508920,#508927,#508934,#508941,#508948, + #508955,#508962,#508969,#508976,#508983,#508990,#508997,#509004, + #509011,#509018,#509025,#509032,#509039,#509046,#509053,#509060, + #509067,#509074,#509081,#509088,#509095,#509102,#509109,#509116, + #509123,#509130,#509137,#509144,#509151,#509158,#509165,#509172, + #509179,#509186,#509193,#509200,#509207,#509214,#509221,#509228, + #509235,#509242,#509249,#509256,#509263,#509270,#509277,#509284, + #509291,#509298,#509305,#509313,#509320,#509327,#509334,#509341, + #509348,#509355,#509362,#509369,#509376,#509383,#509390,#509397, + #509404,#509411,#509418,#509425,#509432,#509439,#509446,#509453, + #509460,#509467,#509474,#509481,#509488,#509495,#509502,#509509, + #509516,#509523,#509530,#509537,#509544,#509551,#509558,#509565, + #509572,#509579,#509586,#509593,#509600,#509607,#509614,#509621, + #509628,#509635,#509642,#509649,#509656,#509663,#509670,#509677, + #509684,#509691,#509698,#509705,#509712,#509719,#509726,#509733, + #509740,#509747,#509754,#509761,#509768,#509775,#509782,#509789, + #509796,#509803,#509810,#509817,#509824,#509831,#509838,#509845, + #509852,#509859,#509866,#509873,#509880,#509887,#509894,#509901, + #509908,#509915,#509922,#509929,#509936,#509943,#509950,#509957, + #509964,#509971,#509978,#509985,#509992,#509999,#510006,#510013, + #510020,#510027,#510034,#510041,#510048,#510055,#510062,#510069, + #510076,#510083,#510090,#510097,#510104,#510111,#510118,#510125, + #510132,#510139,#510146,#510153,#510160,#510167,#510174,#510181, + #510188,#510195,#510202,#510209,#510216,#510223,#510230,#510237, + #510244,#510251,#510258,#510265,#510272,#510279,#510286,#510293, + #510300,#510307,#510314,#510321,#510328,#510335,#510342,#510349, + #510356,#510363,#510370,#510378,#510385,#510392,#510399,#510406, + #510413,#510420,#510427,#510434,#510441,#510448,#510455,#510462, + #510469,#510476,#510483,#510490,#510497,#510504,#510511,#510518, + #510525,#510532,#510539,#510546,#510553,#510560,#510567,#510574, + #510581,#510588,#510595,#510602,#510609,#510616,#510623,#510630, + #510637,#510644,#510651,#510658,#510665,#510672,#510679,#510686, + #510693,#510700,#510707,#510714,#510721,#510728,#510735,#510742, + #510749,#510756,#510763,#510770,#510777,#510784,#510791,#510799, + #510806,#510813,#510820,#510827,#510834,#510841,#510848,#510855, + #510862,#510869,#510876,#510883,#510890,#510897,#510904,#510911, + #510918,#510925,#510932,#510939,#510946,#510953,#510960,#510967, + #510974,#510981,#510988,#510995,#511002,#511009,#511016,#511023, + #511030,#511037,#511044,#511051,#511058,#511065,#511072,#511079, + #511086,#511093,#511100,#511107,#511114,#511121,#511128,#511135, + #511142,#511149,#511156,#511163,#511170,#511177,#511184,#511191, + #511198,#511205,#511212,#511219,#511226,#511233,#511240,#511247, + #511254,#511261,#511268,#511275,#511282,#511289,#511296,#511303, + #511310,#511317,#511324,#511331,#511338,#511345,#511352,#511359, + #511366,#511373,#511380,#511387,#511394,#511401,#511408,#511415, + #511422,#511429,#511436,#511443,#511450,#511457,#511464,#511471, + #511478,#511485,#511492,#511499,#511506,#511513,#511520,#511527, + #511534,#511541,#511548,#511555,#511562,#511569,#511576,#511583, + #511590,#511597,#511604,#511611,#511618,#511625,#511632,#511639, + #511646,#511653,#511660,#511667,#511674,#511681,#511688,#511695, + #511702,#511709,#511716,#511723,#511730,#511737,#511744,#511751, + #511758,#511765,#511772,#511779,#511786,#511793,#511800,#511807, + #511814,#511821,#511828,#511835,#511842,#511849,#511856,#511863, + #511870,#511877,#511884,#511891,#511898,#511905,#511912,#511919, + #511926,#511933,#511940,#511947,#511954,#511961,#511968,#511975, + #511982,#511989,#511996,#512003,#512010,#512017,#512024,#512031, + #512038,#512045,#512052,#512059,#512066,#512073,#512080,#512087, + #512094,#512101,#512108,#512115,#512122,#512129,#512136,#512143, + #512150,#512157,#512164,#512171,#512178,#512185,#512192,#512199, + #512206,#512213,#512220,#512227,#512234,#512241,#512248,#512255, + #512262,#512269,#512276,#512283,#512290,#512297,#512304,#512311, + #512318,#512325,#512332,#512339,#512346,#512353,#512360,#512367, + #512374,#512381,#512388,#512395,#512402,#512409,#512416,#512423, + #512430,#512437,#512444,#512451,#512458,#512465,#512472,#512479, + #512486),#104741); +#506656 = STYLED_ITEM('color',(#506657),#79409); +#506657 = PRESENTATION_STYLE_ASSIGNMENT((#506658)); +#506658 = SURFACE_STYLE_USAGE(.BOTH.,#506659); +#506659 = SURFACE_SIDE_STYLE('',(#506660)); +#506660 = SURFACE_STYLE_FILL_AREA(#506661); +#506661 = FILL_AREA_STYLE('',(#506662)); +#506662 = FILL_AREA_STYLE_COLOUR('',#506663); +#506663 = DRAUGHTING_PRE_DEFINED_COLOUR('white'); +#506664 = OVER_RIDING_STYLED_ITEM('overriding color',(#506665),#79411, + #506656); +#506665 = PRESENTATION_STYLE_ASSIGNMENT((#506666)); +#506666 = SURFACE_STYLE_USAGE(.BOTH.,#506667); +#506667 = SURFACE_SIDE_STYLE('',(#506668)); +#506668 = SURFACE_STYLE_FILL_AREA(#506669); +#506669 = FILL_AREA_STYLE('',(#506670)); +#506670 = FILL_AREA_STYLE_COLOUR('',#506671); +#506671 = COLOUR_RGB('',0.250980388104,0.250980388104,0.250980388104); +#506672 = OVER_RIDING_STYLED_ITEM('overriding color',(#506673),#79462, + #506656); +#506673 = PRESENTATION_STYLE_ASSIGNMENT((#506674)); +#506674 = SURFACE_STYLE_USAGE(.BOTH.,#506675); +#506675 = SURFACE_SIDE_STYLE('',(#506676)); +#506676 = SURFACE_STYLE_FILL_AREA(#506677); +#506677 = FILL_AREA_STYLE('',(#506678)); +#506678 = FILL_AREA_STYLE_COLOUR('',#506671); +#506679 = OVER_RIDING_STYLED_ITEM('overriding color',(#506680),#79513, + #506656); +#506680 = PRESENTATION_STYLE_ASSIGNMENT((#506681)); +#506681 = SURFACE_STYLE_USAGE(.BOTH.,#506682); +#506682 = SURFACE_SIDE_STYLE('',(#506683)); +#506683 = SURFACE_STYLE_FILL_AREA(#506684); +#506684 = FILL_AREA_STYLE('',(#506685)); +#506685 = FILL_AREA_STYLE_COLOUR('',#506671); +#506686 = OVER_RIDING_STYLED_ITEM('overriding color',(#506687),#79545, + #506656); +#506687 = PRESENTATION_STYLE_ASSIGNMENT((#506688)); +#506688 = SURFACE_STYLE_USAGE(.BOTH.,#506689); +#506689 = SURFACE_SIDE_STYLE('',(#506690)); +#506690 = SURFACE_STYLE_FILL_AREA(#506691); +#506691 = FILL_AREA_STYLE('',(#506692)); +#506692 = FILL_AREA_STYLE_COLOUR('',#506671); +#506693 = OVER_RIDING_STYLED_ITEM('overriding color',(#506694),#79577, + #506656); +#506694 = PRESENTATION_STYLE_ASSIGNMENT((#506695)); +#506695 = SURFACE_STYLE_USAGE(.BOTH.,#506696); +#506696 = SURFACE_SIDE_STYLE('',(#506697)); +#506697 = SURFACE_STYLE_FILL_AREA(#506698); +#506698 = FILL_AREA_STYLE('',(#506699)); +#506699 = FILL_AREA_STYLE_COLOUR('',#506700); +#506700 = COLOUR_RGB('',0.850980378684,0.850980378684,0.850980378684); +#506701 = OVER_RIDING_STYLED_ITEM('overriding color',(#506702),#79619, + #506656); +#506702 = PRESENTATION_STYLE_ASSIGNMENT((#506703)); +#506703 = SURFACE_STYLE_USAGE(.BOTH.,#506704); +#506704 = SURFACE_SIDE_STYLE('',(#506705)); +#506705 = SURFACE_STYLE_FILL_AREA(#506706); +#506706 = FILL_AREA_STYLE('',(#506707)); +#506707 = FILL_AREA_STYLE_COLOUR('',#506700); +#506708 = OVER_RIDING_STYLED_ITEM('overriding color',(#506709),#80225, + #506656); +#506709 = PRESENTATION_STYLE_ASSIGNMENT((#506710)); +#506710 = SURFACE_STYLE_USAGE(.BOTH.,#506711); +#506711 = SURFACE_SIDE_STYLE('',(#506712)); +#506712 = SURFACE_STYLE_FILL_AREA(#506713); +#506713 = FILL_AREA_STYLE('',(#506714)); +#506714 = FILL_AREA_STYLE_COLOUR('',#506671); +#506715 = OVER_RIDING_STYLED_ITEM('overriding color',(#506716),#80537, + #506656); +#506716 = PRESENTATION_STYLE_ASSIGNMENT((#506717)); +#506717 = SURFACE_STYLE_USAGE(.BOTH.,#506718); +#506718 = SURFACE_SIDE_STYLE('',(#506719)); +#506719 = SURFACE_STYLE_FILL_AREA(#506720); +#506720 = FILL_AREA_STYLE('',(#506721)); +#506721 = FILL_AREA_STYLE_COLOUR('',#506671); +#506722 = OVER_RIDING_STYLED_ITEM('overriding color',(#506723),#80961, + #506656); +#506723 = PRESENTATION_STYLE_ASSIGNMENT((#506724)); +#506724 = SURFACE_STYLE_USAGE(.BOTH.,#506725); +#506725 = SURFACE_SIDE_STYLE('',(#506726)); +#506726 = SURFACE_STYLE_FILL_AREA(#506727); +#506727 = FILL_AREA_STYLE('',(#506728)); +#506728 = FILL_AREA_STYLE_COLOUR('',#506700); +#506729 = OVER_RIDING_STYLED_ITEM('overriding color',(#506730),#81019, + #506656); +#506730 = PRESENTATION_STYLE_ASSIGNMENT((#506731)); +#506731 = SURFACE_STYLE_USAGE(.BOTH.,#506732); +#506732 = SURFACE_SIDE_STYLE('',(#506733)); +#506733 = SURFACE_STYLE_FILL_AREA(#506734); +#506734 = FILL_AREA_STYLE('',(#506735)); +#506735 = FILL_AREA_STYLE_COLOUR('',#506700); +#506736 = OVER_RIDING_STYLED_ITEM('overriding color',(#506737),#81060, + #506656); +#506737 = PRESENTATION_STYLE_ASSIGNMENT((#506738)); +#506738 = SURFACE_STYLE_USAGE(.BOTH.,#506739); +#506739 = SURFACE_SIDE_STYLE('',(#506740)); +#506740 = SURFACE_STYLE_FILL_AREA(#506741); +#506741 = FILL_AREA_STYLE('',(#506742)); +#506742 = FILL_AREA_STYLE_COLOUR('',#506700); +#506743 = OVER_RIDING_STYLED_ITEM('overriding color',(#506744),#81101, + #506656); +#506744 = PRESENTATION_STYLE_ASSIGNMENT((#506745)); +#506745 = SURFACE_STYLE_USAGE(.BOTH.,#506746); +#506746 = SURFACE_SIDE_STYLE('',(#506747)); +#506747 = SURFACE_STYLE_FILL_AREA(#506748); +#506748 = FILL_AREA_STYLE('',(#506749)); +#506749 = FILL_AREA_STYLE_COLOUR('',#506671); +#506750 = OVER_RIDING_STYLED_ITEM('overriding color',(#506751),#81141, + #506656); +#506751 = PRESENTATION_STYLE_ASSIGNMENT((#506752)); +#506752 = SURFACE_STYLE_USAGE(.BOTH.,#506753); +#506753 = SURFACE_SIDE_STYLE('',(#506754)); +#506754 = SURFACE_STYLE_FILL_AREA(#506755); +#506755 = FILL_AREA_STYLE('',(#506756)); +#506756 = FILL_AREA_STYLE_COLOUR('',#506671); +#506757 = OVER_RIDING_STYLED_ITEM('overriding color',(#506758),#81181, + #506656); +#506758 = PRESENTATION_STYLE_ASSIGNMENT((#506759)); +#506759 = SURFACE_STYLE_USAGE(.BOTH.,#506760); +#506760 = SURFACE_SIDE_STYLE('',(#506761)); +#506761 = SURFACE_STYLE_FILL_AREA(#506762); +#506762 = FILL_AREA_STYLE('',(#506763)); +#506763 = FILL_AREA_STYLE_COLOUR('',#506700); +#506764 = OVER_RIDING_STYLED_ITEM('overriding color',(#506765),#81239, + #506656); +#506765 = PRESENTATION_STYLE_ASSIGNMENT((#506766)); +#506766 = SURFACE_STYLE_USAGE(.BOTH.,#506767); +#506767 = SURFACE_SIDE_STYLE('',(#506768)); +#506768 = SURFACE_STYLE_FILL_AREA(#506769); +#506769 = FILL_AREA_STYLE('',(#506770)); +#506770 = FILL_AREA_STYLE_COLOUR('',#506700); +#506771 = OVER_RIDING_STYLED_ITEM('overriding color',(#506772),#81407, + #506656); +#506772 = PRESENTATION_STYLE_ASSIGNMENT((#506773)); +#506773 = SURFACE_STYLE_USAGE(.BOTH.,#506774); +#506774 = SURFACE_SIDE_STYLE('',(#506775)); +#506775 = SURFACE_STYLE_FILL_AREA(#506776); +#506776 = FILL_AREA_STYLE('',(#506777)); +#506777 = FILL_AREA_STYLE_COLOUR('',#506700); +#506778 = OVER_RIDING_STYLED_ITEM('overriding color',(#506779),#81447, + #506656); +#506779 = PRESENTATION_STYLE_ASSIGNMENT((#506780)); +#506780 = SURFACE_STYLE_USAGE(.BOTH.,#506781); +#506781 = SURFACE_SIDE_STYLE('',(#506782)); +#506782 = SURFACE_STYLE_FILL_AREA(#506783); +#506783 = FILL_AREA_STYLE('',(#506784)); +#506784 = FILL_AREA_STYLE_COLOUR('',#506700); +#506785 = OVER_RIDING_STYLED_ITEM('overriding color',(#506786),#81615, + #506656); +#506786 = PRESENTATION_STYLE_ASSIGNMENT((#506787)); +#506787 = SURFACE_STYLE_USAGE(.BOTH.,#506788); +#506788 = SURFACE_SIDE_STYLE('',(#506789)); +#506789 = SURFACE_STYLE_FILL_AREA(#506790); +#506790 = FILL_AREA_STYLE('',(#506791)); +#506791 = FILL_AREA_STYLE_COLOUR('',#506700); +#506792 = OVER_RIDING_STYLED_ITEM('overriding color',(#506793),#81755, + #506656); +#506793 = PRESENTATION_STYLE_ASSIGNMENT((#506794)); +#506794 = SURFACE_STYLE_USAGE(.BOTH.,#506795); +#506795 = SURFACE_SIDE_STYLE('',(#506796)); +#506796 = SURFACE_STYLE_FILL_AREA(#506797); +#506797 = FILL_AREA_STYLE('',(#506798)); +#506798 = FILL_AREA_STYLE_COLOUR('',#506700); +#506799 = OVER_RIDING_STYLED_ITEM('overriding color',(#506800),#81795, + #506656); +#506800 = PRESENTATION_STYLE_ASSIGNMENT((#506801)); +#506801 = SURFACE_STYLE_USAGE(.BOTH.,#506802); +#506802 = SURFACE_SIDE_STYLE('',(#506803)); +#506803 = SURFACE_STYLE_FILL_AREA(#506804); +#506804 = FILL_AREA_STYLE('',(#506805)); +#506805 = FILL_AREA_STYLE_COLOUR('',#506700); +#506806 = OVER_RIDING_STYLED_ITEM('overriding color',(#506807),#81869, + #506656); +#506807 = PRESENTATION_STYLE_ASSIGNMENT((#506808)); +#506808 = SURFACE_STYLE_USAGE(.BOTH.,#506809); +#506809 = SURFACE_SIDE_STYLE('',(#506810)); +#506810 = SURFACE_STYLE_FILL_AREA(#506811); +#506811 = FILL_AREA_STYLE('',(#506812)); +#506812 = FILL_AREA_STYLE_COLOUR('',#506700); +#506813 = OVER_RIDING_STYLED_ITEM('overriding color',(#506814),#81909, + #506656); +#506814 = PRESENTATION_STYLE_ASSIGNMENT((#506815)); +#506815 = SURFACE_STYLE_USAGE(.BOTH.,#506816); +#506816 = SURFACE_SIDE_STYLE('',(#506817)); +#506817 = SURFACE_STYLE_FILL_AREA(#506818); +#506818 = FILL_AREA_STYLE('',(#506819)); +#506819 = FILL_AREA_STYLE_COLOUR('',#506700); +#506820 = OVER_RIDING_STYLED_ITEM('overriding color',(#506821),#81949, + #506656); +#506821 = PRESENTATION_STYLE_ASSIGNMENT((#506822)); +#506822 = SURFACE_STYLE_USAGE(.BOTH.,#506823); +#506823 = SURFACE_SIDE_STYLE('',(#506824)); +#506824 = SURFACE_STYLE_FILL_AREA(#506825); +#506825 = FILL_AREA_STYLE('',(#506826)); +#506826 = FILL_AREA_STYLE_COLOUR('',#506700); +#506827 = OVER_RIDING_STYLED_ITEM('overriding color',(#506828),#81982, + #506656); +#506828 = PRESENTATION_STYLE_ASSIGNMENT((#506829)); +#506829 = SURFACE_STYLE_USAGE(.BOTH.,#506830); +#506830 = SURFACE_SIDE_STYLE('',(#506831)); +#506831 = SURFACE_STYLE_FILL_AREA(#506832); +#506832 = FILL_AREA_STYLE('',(#506833)); +#506833 = FILL_AREA_STYLE_COLOUR('',#506700); +#506834 = OVER_RIDING_STYLED_ITEM('overriding color',(#506835),#82006, + #506656); +#506835 = PRESENTATION_STYLE_ASSIGNMENT((#506836)); +#506836 = SURFACE_STYLE_USAGE(.BOTH.,#506837); +#506837 = SURFACE_SIDE_STYLE('',(#506838)); +#506838 = SURFACE_STYLE_FILL_AREA(#506839); +#506839 = FILL_AREA_STYLE('',(#506840)); +#506840 = FILL_AREA_STYLE_COLOUR('',#506700); +#506841 = OVER_RIDING_STYLED_ITEM('overriding color',(#506842),#82080, + #506656); +#506842 = PRESENTATION_STYLE_ASSIGNMENT((#506843)); +#506843 = SURFACE_STYLE_USAGE(.BOTH.,#506844); +#506844 = SURFACE_SIDE_STYLE('',(#506845)); +#506845 = SURFACE_STYLE_FILL_AREA(#506846); +#506846 = FILL_AREA_STYLE('',(#506847)); +#506847 = FILL_AREA_STYLE_COLOUR('',#506700); +#506848 = OVER_RIDING_STYLED_ITEM('overriding color',(#506849),#82104, + #506656); +#506849 = PRESENTATION_STYLE_ASSIGNMENT((#506850)); +#506850 = SURFACE_STYLE_USAGE(.BOTH.,#506851); +#506851 = SURFACE_SIDE_STYLE('',(#506852)); +#506852 = SURFACE_STYLE_FILL_AREA(#506853); +#506853 = FILL_AREA_STYLE('',(#506854)); +#506854 = FILL_AREA_STYLE_COLOUR('',#506700); +#506855 = OVER_RIDING_STYLED_ITEM('overriding color',(#506856),#82137, + #506656); +#506856 = PRESENTATION_STYLE_ASSIGNMENT((#506857)); +#506857 = SURFACE_STYLE_USAGE(.BOTH.,#506858); +#506858 = SURFACE_SIDE_STYLE('',(#506859)); +#506859 = SURFACE_STYLE_FILL_AREA(#506860); +#506860 = FILL_AREA_STYLE('',(#506861)); +#506861 = FILL_AREA_STYLE_COLOUR('',#506700); +#506862 = OVER_RIDING_STYLED_ITEM('overriding color',(#506863),#82283, + #506656); +#506863 = PRESENTATION_STYLE_ASSIGNMENT((#506864)); +#506864 = SURFACE_STYLE_USAGE(.BOTH.,#506865); +#506865 = SURFACE_SIDE_STYLE('',(#506866)); +#506866 = SURFACE_STYLE_FILL_AREA(#506867); +#506867 = FILL_AREA_STYLE('',(#506868)); +#506868 = FILL_AREA_STYLE_COLOUR('',#506700); +#506869 = OVER_RIDING_STYLED_ITEM('overriding color',(#506870),#82459, + #506656); +#506870 = PRESENTATION_STYLE_ASSIGNMENT((#506871)); +#506871 = SURFACE_STYLE_USAGE(.BOTH.,#506872); +#506872 = SURFACE_SIDE_STYLE('',(#506873)); +#506873 = SURFACE_STYLE_FILL_AREA(#506874); +#506874 = FILL_AREA_STYLE('',(#506875)); +#506875 = FILL_AREA_STYLE_COLOUR('',#506700); +#506876 = OVER_RIDING_STYLED_ITEM('overriding color',(#506877),#82686, + #506656); +#506877 = PRESENTATION_STYLE_ASSIGNMENT((#506878)); +#506878 = SURFACE_STYLE_USAGE(.BOTH.,#506879); +#506879 = SURFACE_SIDE_STYLE('',(#506880)); +#506880 = SURFACE_STYLE_FILL_AREA(#506881); +#506881 = FILL_AREA_STYLE('',(#506882)); +#506882 = FILL_AREA_STYLE_COLOUR('',#506700); +#506883 = OVER_RIDING_STYLED_ITEM('overriding color',(#506884),#82913, + #506656); +#506884 = PRESENTATION_STYLE_ASSIGNMENT((#506885)); +#506885 = SURFACE_STYLE_USAGE(.BOTH.,#506886); +#506886 = SURFACE_SIDE_STYLE('',(#506887)); +#506887 = SURFACE_STYLE_FILL_AREA(#506888); +#506888 = FILL_AREA_STYLE('',(#506889)); +#506889 = FILL_AREA_STYLE_COLOUR('',#506700); +#506890 = OVER_RIDING_STYLED_ITEM('overriding color',(#506891),#82937, + #506656); +#506891 = PRESENTATION_STYLE_ASSIGNMENT((#506892)); +#506892 = SURFACE_STYLE_USAGE(.BOTH.,#506893); +#506893 = SURFACE_SIDE_STYLE('',(#506894)); +#506894 = SURFACE_STYLE_FILL_AREA(#506895); +#506895 = FILL_AREA_STYLE('',(#506896)); +#506896 = FILL_AREA_STYLE_COLOUR('',#506700); +#506897 = OVER_RIDING_STYLED_ITEM('overriding color',(#506898),#82961, + #506656); +#506898 = PRESENTATION_STYLE_ASSIGNMENT((#506899)); +#506899 = SURFACE_STYLE_USAGE(.BOTH.,#506900); +#506900 = SURFACE_SIDE_STYLE('',(#506901)); +#506901 = SURFACE_STYLE_FILL_AREA(#506902); +#506902 = FILL_AREA_STYLE('',(#506903)); +#506903 = FILL_AREA_STYLE_COLOUR('',#506700); +#506904 = OVER_RIDING_STYLED_ITEM('overriding color',(#506905),#82985, + #506656); +#506905 = PRESENTATION_STYLE_ASSIGNMENT((#506906)); +#506906 = SURFACE_STYLE_USAGE(.BOTH.,#506907); +#506907 = SURFACE_SIDE_STYLE('',(#506908)); +#506908 = SURFACE_STYLE_FILL_AREA(#506909); +#506909 = FILL_AREA_STYLE('',(#506910)); +#506910 = FILL_AREA_STYLE_COLOUR('',#506700); +#506911 = OVER_RIDING_STYLED_ITEM('overriding color',(#506912),#83009, + #506656); +#506912 = PRESENTATION_STYLE_ASSIGNMENT((#506913)); +#506913 = SURFACE_STYLE_USAGE(.BOTH.,#506914); +#506914 = SURFACE_SIDE_STYLE('',(#506915)); +#506915 = SURFACE_STYLE_FILL_AREA(#506916); +#506916 = FILL_AREA_STYLE('',(#506917)); +#506917 = FILL_AREA_STYLE_COLOUR('',#506700); +#506918 = OVER_RIDING_STYLED_ITEM('overriding color',(#506919),#83033, + #506656); +#506919 = PRESENTATION_STYLE_ASSIGNMENT((#506920)); +#506920 = SURFACE_STYLE_USAGE(.BOTH.,#506921); +#506921 = SURFACE_SIDE_STYLE('',(#506922)); +#506922 = SURFACE_STYLE_FILL_AREA(#506923); +#506923 = FILL_AREA_STYLE('',(#506924)); +#506924 = FILL_AREA_STYLE_COLOUR('',#506700); +#506925 = OVER_RIDING_STYLED_ITEM('overriding color',(#506926),#83057, + #506656); +#506926 = PRESENTATION_STYLE_ASSIGNMENT((#506927)); +#506927 = SURFACE_STYLE_USAGE(.BOTH.,#506928); +#506928 = SURFACE_SIDE_STYLE('',(#506929)); +#506929 = SURFACE_STYLE_FILL_AREA(#506930); +#506930 = FILL_AREA_STYLE('',(#506931)); +#506931 = FILL_AREA_STYLE_COLOUR('',#506700); +#506932 = OVER_RIDING_STYLED_ITEM('overriding color',(#506933),#83081, + #506656); +#506933 = PRESENTATION_STYLE_ASSIGNMENT((#506934)); +#506934 = SURFACE_STYLE_USAGE(.BOTH.,#506935); +#506935 = SURFACE_SIDE_STYLE('',(#506936)); +#506936 = SURFACE_STYLE_FILL_AREA(#506937); +#506937 = FILL_AREA_STYLE('',(#506938)); +#506938 = FILL_AREA_STYLE_COLOUR('',#506700); +#506939 = OVER_RIDING_STYLED_ITEM('overriding color',(#506940),#83105, + #506656); +#506940 = PRESENTATION_STYLE_ASSIGNMENT((#506941)); +#506941 = SURFACE_STYLE_USAGE(.BOTH.,#506942); +#506942 = SURFACE_SIDE_STYLE('',(#506943)); +#506943 = SURFACE_STYLE_FILL_AREA(#506944); +#506944 = FILL_AREA_STYLE('',(#506945)); +#506945 = FILL_AREA_STYLE_COLOUR('',#506700); +#506946 = OVER_RIDING_STYLED_ITEM('overriding color',(#506947),#83147, + #506656); +#506947 = PRESENTATION_STYLE_ASSIGNMENT((#506948)); +#506948 = SURFACE_STYLE_USAGE(.BOTH.,#506949); +#506949 = SURFACE_SIDE_STYLE('',(#506950)); +#506950 = SURFACE_STYLE_FILL_AREA(#506951); +#506951 = FILL_AREA_STYLE('',(#506952)); +#506952 = FILL_AREA_STYLE_COLOUR('',#506700); +#506953 = OVER_RIDING_STYLED_ITEM('overriding color',(#506954),#83178, + #506656); +#506954 = PRESENTATION_STYLE_ASSIGNMENT((#506955)); +#506955 = SURFACE_STYLE_USAGE(.BOTH.,#506956); +#506956 = SURFACE_SIDE_STYLE('',(#506957)); +#506957 = SURFACE_STYLE_FILL_AREA(#506958); +#506958 = FILL_AREA_STYLE('',(#506959)); +#506959 = FILL_AREA_STYLE_COLOUR('',#506700); +#506960 = OVER_RIDING_STYLED_ITEM('overriding color',(#506961),#83211, + #506656); +#506961 = PRESENTATION_STYLE_ASSIGNMENT((#506962)); +#506962 = SURFACE_STYLE_USAGE(.BOTH.,#506963); +#506963 = SURFACE_SIDE_STYLE('',(#506964)); +#506964 = SURFACE_STYLE_FILL_AREA(#506965); +#506965 = FILL_AREA_STYLE('',(#506966)); +#506966 = FILL_AREA_STYLE_COLOUR('',#506700); +#506967 = OVER_RIDING_STYLED_ITEM('overriding color',(#506968),#83276, + #506656); +#506968 = PRESENTATION_STYLE_ASSIGNMENT((#506969)); +#506969 = SURFACE_STYLE_USAGE(.BOTH.,#506970); +#506970 = SURFACE_SIDE_STYLE('',(#506971)); +#506971 = SURFACE_STYLE_FILL_AREA(#506972); +#506972 = FILL_AREA_STYLE('',(#506973)); +#506973 = FILL_AREA_STYLE_COLOUR('',#506700); +#506974 = OVER_RIDING_STYLED_ITEM('overriding color',(#506975),#83341, + #506656); +#506975 = PRESENTATION_STYLE_ASSIGNMENT((#506976)); +#506976 = SURFACE_STYLE_USAGE(.BOTH.,#506977); +#506977 = SURFACE_SIDE_STYLE('',(#506978)); +#506978 = SURFACE_STYLE_FILL_AREA(#506979); +#506979 = FILL_AREA_STYLE('',(#506980)); +#506980 = FILL_AREA_STYLE_COLOUR('',#506700); +#506981 = OVER_RIDING_STYLED_ITEM('overriding color',(#506982),#83449, + #506656); +#506982 = PRESENTATION_STYLE_ASSIGNMENT((#506983)); +#506983 = SURFACE_STYLE_USAGE(.BOTH.,#506984); +#506984 = SURFACE_SIDE_STYLE('',(#506985)); +#506985 = SURFACE_STYLE_FILL_AREA(#506986); +#506986 = FILL_AREA_STYLE('',(#506987)); +#506987 = FILL_AREA_STYLE_COLOUR('',#506700); +#506988 = OVER_RIDING_STYLED_ITEM('overriding color',(#506989),#83523, + #506656); +#506989 = PRESENTATION_STYLE_ASSIGNMENT((#506990)); +#506990 = SURFACE_STYLE_USAGE(.BOTH.,#506991); +#506991 = SURFACE_SIDE_STYLE('',(#506992)); +#506992 = SURFACE_STYLE_FILL_AREA(#506993); +#506993 = FILL_AREA_STYLE('',(#506994)); +#506994 = FILL_AREA_STYLE_COLOUR('',#506700); +#506995 = OVER_RIDING_STYLED_ITEM('overriding color',(#506996),#83556, + #506656); +#506996 = PRESENTATION_STYLE_ASSIGNMENT((#506997)); +#506997 = SURFACE_STYLE_USAGE(.BOTH.,#506998); +#506998 = SURFACE_SIDE_STYLE('',(#506999)); +#506999 = SURFACE_STYLE_FILL_AREA(#507000); +#507000 = FILL_AREA_STYLE('',(#507001)); +#507001 = FILL_AREA_STYLE_COLOUR('',#506700); +#507002 = OVER_RIDING_STYLED_ITEM('overriding color',(#507003),#83587, + #506656); +#507003 = PRESENTATION_STYLE_ASSIGNMENT((#507004)); +#507004 = SURFACE_STYLE_USAGE(.BOTH.,#507005); +#507005 = SURFACE_SIDE_STYLE('',(#507006)); +#507006 = SURFACE_STYLE_FILL_AREA(#507007); +#507007 = FILL_AREA_STYLE('',(#507008)); +#507008 = FILL_AREA_STYLE_COLOUR('',#506700); +#507009 = OVER_RIDING_STYLED_ITEM('overriding color',(#507010),#83620, + #506656); +#507010 = PRESENTATION_STYLE_ASSIGNMENT((#507011)); +#507011 = SURFACE_STYLE_USAGE(.BOTH.,#507012); +#507012 = SURFACE_SIDE_STYLE('',(#507013)); +#507013 = SURFACE_STYLE_FILL_AREA(#507014); +#507014 = FILL_AREA_STYLE('',(#507015)); +#507015 = FILL_AREA_STYLE_COLOUR('',#506700); +#507016 = OVER_RIDING_STYLED_ITEM('overriding color',(#507017),#83685, + #506656); +#507017 = PRESENTATION_STYLE_ASSIGNMENT((#507018)); +#507018 = SURFACE_STYLE_USAGE(.BOTH.,#507019); +#507019 = SURFACE_SIDE_STYLE('',(#507020)); +#507020 = SURFACE_STYLE_FILL_AREA(#507021); +#507021 = FILL_AREA_STYLE('',(#507022)); +#507022 = FILL_AREA_STYLE_COLOUR('',#506700); +#507023 = OVER_RIDING_STYLED_ITEM('overriding color',(#507024),#83725, + #506656); +#507024 = PRESENTATION_STYLE_ASSIGNMENT((#507025)); +#507025 = SURFACE_STYLE_USAGE(.BOTH.,#507026); +#507026 = SURFACE_SIDE_STYLE('',(#507027)); +#507027 = SURFACE_STYLE_FILL_AREA(#507028); +#507028 = FILL_AREA_STYLE('',(#507029)); +#507029 = FILL_AREA_STYLE_COLOUR('',#506700); +#507030 = OVER_RIDING_STYLED_ITEM('overriding color',(#507031),#83765, + #506656); +#507031 = PRESENTATION_STYLE_ASSIGNMENT((#507032)); +#507032 = SURFACE_STYLE_USAGE(.BOTH.,#507033); +#507033 = SURFACE_SIDE_STYLE('',(#507034)); +#507034 = SURFACE_STYLE_FILL_AREA(#507035); +#507035 = FILL_AREA_STYLE('',(#507036)); +#507036 = FILL_AREA_STYLE_COLOUR('',#506700); +#507037 = OVER_RIDING_STYLED_ITEM('overriding color',(#507038),#83805, + #506656); +#507038 = PRESENTATION_STYLE_ASSIGNMENT((#507039)); +#507039 = SURFACE_STYLE_USAGE(.BOTH.,#507040); +#507040 = SURFACE_SIDE_STYLE('',(#507041)); +#507041 = SURFACE_STYLE_FILL_AREA(#507042); +#507042 = FILL_AREA_STYLE('',(#507043)); +#507043 = FILL_AREA_STYLE_COLOUR('',#506700); +#507044 = OVER_RIDING_STYLED_ITEM('overriding color',(#507045),#83845, + #506656); +#507045 = PRESENTATION_STYLE_ASSIGNMENT((#507046)); +#507046 = SURFACE_STYLE_USAGE(.BOTH.,#507047); +#507047 = SURFACE_SIDE_STYLE('',(#507048)); +#507048 = SURFACE_STYLE_FILL_AREA(#507049); +#507049 = FILL_AREA_STYLE('',(#507050)); +#507050 = FILL_AREA_STYLE_COLOUR('',#506700); +#507051 = OVER_RIDING_STYLED_ITEM('overriding color',(#507052),#83885, + #506656); +#507052 = PRESENTATION_STYLE_ASSIGNMENT((#507053)); +#507053 = SURFACE_STYLE_USAGE(.BOTH.,#507054); +#507054 = SURFACE_SIDE_STYLE('',(#507055)); +#507055 = SURFACE_STYLE_FILL_AREA(#507056); +#507056 = FILL_AREA_STYLE('',(#507057)); +#507057 = FILL_AREA_STYLE_COLOUR('',#506700); +#507058 = OVER_RIDING_STYLED_ITEM('overriding color',(#507059),#83925, + #506656); +#507059 = PRESENTATION_STYLE_ASSIGNMENT((#507060)); +#507060 = SURFACE_STYLE_USAGE(.BOTH.,#507061); +#507061 = SURFACE_SIDE_STYLE('',(#507062)); +#507062 = SURFACE_STYLE_FILL_AREA(#507063); +#507063 = FILL_AREA_STYLE('',(#507064)); +#507064 = FILL_AREA_STYLE_COLOUR('',#506700); +#507065 = OVER_RIDING_STYLED_ITEM('overriding color',(#507066),#83965, + #506656); +#507066 = PRESENTATION_STYLE_ASSIGNMENT((#507067)); +#507067 = SURFACE_STYLE_USAGE(.BOTH.,#507068); +#507068 = SURFACE_SIDE_STYLE('',(#507069)); +#507069 = SURFACE_STYLE_FILL_AREA(#507070); +#507070 = FILL_AREA_STYLE('',(#507071)); +#507071 = FILL_AREA_STYLE_COLOUR('',#506700); +#507072 = OVER_RIDING_STYLED_ITEM('overriding color',(#507073),#84005, + #506656); +#507073 = PRESENTATION_STYLE_ASSIGNMENT((#507074)); +#507074 = SURFACE_STYLE_USAGE(.BOTH.,#507075); +#507075 = SURFACE_SIDE_STYLE('',(#507076)); +#507076 = SURFACE_STYLE_FILL_AREA(#507077); +#507077 = FILL_AREA_STYLE('',(#507078)); +#507078 = FILL_AREA_STYLE_COLOUR('',#506700); +#507079 = OVER_RIDING_STYLED_ITEM('overriding color',(#507080),#84045, + #506656); +#507080 = PRESENTATION_STYLE_ASSIGNMENT((#507081)); +#507081 = SURFACE_STYLE_USAGE(.BOTH.,#507082); +#507082 = SURFACE_SIDE_STYLE('',(#507083)); +#507083 = SURFACE_STYLE_FILL_AREA(#507084); +#507084 = FILL_AREA_STYLE('',(#507085)); +#507085 = FILL_AREA_STYLE_COLOUR('',#506700); +#507086 = OVER_RIDING_STYLED_ITEM('overriding color',(#507087),#84085, + #506656); +#507087 = PRESENTATION_STYLE_ASSIGNMENT((#507088)); +#507088 = SURFACE_STYLE_USAGE(.BOTH.,#507089); +#507089 = SURFACE_SIDE_STYLE('',(#507090)); +#507090 = SURFACE_STYLE_FILL_AREA(#507091); +#507091 = FILL_AREA_STYLE('',(#507092)); +#507092 = FILL_AREA_STYLE_COLOUR('',#506700); +#507093 = OVER_RIDING_STYLED_ITEM('overriding color',(#507094),#84118, + #506656); +#507094 = PRESENTATION_STYLE_ASSIGNMENT((#507095)); +#507095 = SURFACE_STYLE_USAGE(.BOTH.,#507096); +#507096 = SURFACE_SIDE_STYLE('',(#507097)); +#507097 = SURFACE_STYLE_FILL_AREA(#507098); +#507098 = FILL_AREA_STYLE('',(#507099)); +#507099 = FILL_AREA_STYLE_COLOUR('',#506700); +#507100 = OVER_RIDING_STYLED_ITEM('overriding color',(#507101),#84142, + #506656); +#507101 = PRESENTATION_STYLE_ASSIGNMENT((#507102)); +#507102 = SURFACE_STYLE_USAGE(.BOTH.,#507103); +#507103 = SURFACE_SIDE_STYLE('',(#507104)); +#507104 = SURFACE_STYLE_FILL_AREA(#507105); +#507105 = FILL_AREA_STYLE('',(#507106)); +#507106 = FILL_AREA_STYLE_COLOUR('',#506700); +#507107 = OVER_RIDING_STYLED_ITEM('overriding color',(#507108),#84175, + #506656); +#507108 = PRESENTATION_STYLE_ASSIGNMENT((#507109)); +#507109 = SURFACE_STYLE_USAGE(.BOTH.,#507110); +#507110 = SURFACE_SIDE_STYLE('',(#507111)); +#507111 = SURFACE_STYLE_FILL_AREA(#507112); +#507112 = FILL_AREA_STYLE('',(#507113)); +#507113 = FILL_AREA_STYLE_COLOUR('',#506700); +#507114 = OVER_RIDING_STYLED_ITEM('overriding color',(#507115),#84199, + #506656); +#507115 = PRESENTATION_STYLE_ASSIGNMENT((#507116)); +#507116 = SURFACE_STYLE_USAGE(.BOTH.,#507117); +#507117 = SURFACE_SIDE_STYLE('',(#507118)); +#507118 = SURFACE_STYLE_FILL_AREA(#507119); +#507119 = FILL_AREA_STYLE('',(#507120)); +#507120 = FILL_AREA_STYLE_COLOUR('',#506700); +#507121 = OVER_RIDING_STYLED_ITEM('overriding color',(#507122),#84223, + #506656); +#507122 = PRESENTATION_STYLE_ASSIGNMENT((#507123)); +#507123 = SURFACE_STYLE_USAGE(.BOTH.,#507124); +#507124 = SURFACE_SIDE_STYLE('',(#507125)); +#507125 = SURFACE_STYLE_FILL_AREA(#507126); +#507126 = FILL_AREA_STYLE('',(#507127)); +#507127 = FILL_AREA_STYLE_COLOUR('',#506700); +#507128 = OVER_RIDING_STYLED_ITEM('overriding color',(#507129),#84247, + #506656); +#507129 = PRESENTATION_STYLE_ASSIGNMENT((#507130)); +#507130 = SURFACE_STYLE_USAGE(.BOTH.,#507131); +#507131 = SURFACE_SIDE_STYLE('',(#507132)); +#507132 = SURFACE_STYLE_FILL_AREA(#507133); +#507133 = FILL_AREA_STYLE('',(#507134)); +#507134 = FILL_AREA_STYLE_COLOUR('',#506700); +#507135 = OVER_RIDING_STYLED_ITEM('overriding color',(#507136),#84271, + #506656); +#507136 = PRESENTATION_STYLE_ASSIGNMENT((#507137)); +#507137 = SURFACE_STYLE_USAGE(.BOTH.,#507138); +#507138 = SURFACE_SIDE_STYLE('',(#507139)); +#507139 = SURFACE_STYLE_FILL_AREA(#507140); +#507140 = FILL_AREA_STYLE('',(#507141)); +#507141 = FILL_AREA_STYLE_COLOUR('',#506700); +#507142 = OVER_RIDING_STYLED_ITEM('overriding color',(#507143),#84295, + #506656); +#507143 = PRESENTATION_STYLE_ASSIGNMENT((#507144)); +#507144 = SURFACE_STYLE_USAGE(.BOTH.,#507145); +#507145 = SURFACE_SIDE_STYLE('',(#507146)); +#507146 = SURFACE_STYLE_FILL_AREA(#507147); +#507147 = FILL_AREA_STYLE('',(#507148)); +#507148 = FILL_AREA_STYLE_COLOUR('',#506700); +#507149 = OVER_RIDING_STYLED_ITEM('overriding color',(#507150),#84335, + #506656); +#507150 = PRESENTATION_STYLE_ASSIGNMENT((#507151)); +#507151 = SURFACE_STYLE_USAGE(.BOTH.,#507152); +#507152 = SURFACE_SIDE_STYLE('',(#507153)); +#507153 = SURFACE_STYLE_FILL_AREA(#507154); +#507154 = FILL_AREA_STYLE('',(#507155)); +#507155 = FILL_AREA_STYLE_COLOUR('',#506700); +#507156 = OVER_RIDING_STYLED_ITEM('overriding color',(#507157),#84375, + #506656); +#507157 = PRESENTATION_STYLE_ASSIGNMENT((#507158)); +#507158 = SURFACE_STYLE_USAGE(.BOTH.,#507159); +#507159 = SURFACE_SIDE_STYLE('',(#507160)); +#507160 = SURFACE_STYLE_FILL_AREA(#507161); +#507161 = FILL_AREA_STYLE('',(#507162)); +#507162 = FILL_AREA_STYLE_COLOUR('',#506700); +#507163 = OVER_RIDING_STYLED_ITEM('overriding color',(#507164),#84399, + #506656); +#507164 = PRESENTATION_STYLE_ASSIGNMENT((#507165)); +#507165 = SURFACE_STYLE_USAGE(.BOTH.,#507166); +#507166 = SURFACE_SIDE_STYLE('',(#507167)); +#507167 = SURFACE_STYLE_FILL_AREA(#507168); +#507168 = FILL_AREA_STYLE('',(#507169)); +#507169 = FILL_AREA_STYLE_COLOUR('',#506700); +#507170 = OVER_RIDING_STYLED_ITEM('overriding color',(#507171),#84423, + #506656); +#507171 = PRESENTATION_STYLE_ASSIGNMENT((#507172)); +#507172 = SURFACE_STYLE_USAGE(.BOTH.,#507173); +#507173 = SURFACE_SIDE_STYLE('',(#507174)); +#507174 = SURFACE_STYLE_FILL_AREA(#507175); +#507175 = FILL_AREA_STYLE('',(#507176)); +#507176 = FILL_AREA_STYLE_COLOUR('',#506700); +#507177 = OVER_RIDING_STYLED_ITEM('overriding color',(#507178),#84447, + #506656); +#507178 = PRESENTATION_STYLE_ASSIGNMENT((#507179)); +#507179 = SURFACE_STYLE_USAGE(.BOTH.,#507180); +#507180 = SURFACE_SIDE_STYLE('',(#507181)); +#507181 = SURFACE_STYLE_FILL_AREA(#507182); +#507182 = FILL_AREA_STYLE('',(#507183)); +#507183 = FILL_AREA_STYLE_COLOUR('',#506700); +#507184 = OVER_RIDING_STYLED_ITEM('overriding color',(#507185),#84471, + #506656); +#507185 = PRESENTATION_STYLE_ASSIGNMENT((#507186)); +#507186 = SURFACE_STYLE_USAGE(.BOTH.,#507187); +#507187 = SURFACE_SIDE_STYLE('',(#507188)); +#507188 = SURFACE_STYLE_FILL_AREA(#507189); +#507189 = FILL_AREA_STYLE('',(#507190)); +#507190 = FILL_AREA_STYLE_COLOUR('',#506700); +#507191 = OVER_RIDING_STYLED_ITEM('overriding color',(#507192),#84495, + #506656); +#507192 = PRESENTATION_STYLE_ASSIGNMENT((#507193)); +#507193 = SURFACE_STYLE_USAGE(.BOTH.,#507194); +#507194 = SURFACE_SIDE_STYLE('',(#507195)); +#507195 = SURFACE_STYLE_FILL_AREA(#507196); +#507196 = FILL_AREA_STYLE('',(#507197)); +#507197 = FILL_AREA_STYLE_COLOUR('',#506700); +#507198 = OVER_RIDING_STYLED_ITEM('overriding color',(#507199),#84519, + #506656); +#507199 = PRESENTATION_STYLE_ASSIGNMENT((#507200)); +#507200 = SURFACE_STYLE_USAGE(.BOTH.,#507201); +#507201 = SURFACE_SIDE_STYLE('',(#507202)); +#507202 = SURFACE_STYLE_FILL_AREA(#507203); +#507203 = FILL_AREA_STYLE('',(#507204)); +#507204 = FILL_AREA_STYLE_COLOUR('',#506700); +#507205 = OVER_RIDING_STYLED_ITEM('overriding color',(#507206),#84543, + #506656); +#507206 = PRESENTATION_STYLE_ASSIGNMENT((#507207)); +#507207 = SURFACE_STYLE_USAGE(.BOTH.,#507208); +#507208 = SURFACE_SIDE_STYLE('',(#507209)); +#507209 = SURFACE_STYLE_FILL_AREA(#507210); +#507210 = FILL_AREA_STYLE('',(#507211)); +#507211 = FILL_AREA_STYLE_COLOUR('',#506700); +#507212 = OVER_RIDING_STYLED_ITEM('overriding color',(#507213),#84567, + #506656); +#507213 = PRESENTATION_STYLE_ASSIGNMENT((#507214)); +#507214 = SURFACE_STYLE_USAGE(.BOTH.,#507215); +#507215 = SURFACE_SIDE_STYLE('',(#507216)); +#507216 = SURFACE_STYLE_FILL_AREA(#507217); +#507217 = FILL_AREA_STYLE('',(#507218)); +#507218 = FILL_AREA_STYLE_COLOUR('',#506700); +#507219 = OVER_RIDING_STYLED_ITEM('overriding color',(#507220),#84600, + #506656); +#507220 = PRESENTATION_STYLE_ASSIGNMENT((#507221)); +#507221 = SURFACE_STYLE_USAGE(.BOTH.,#507222); +#507222 = SURFACE_SIDE_STYLE('',(#507223)); +#507223 = SURFACE_STYLE_FILL_AREA(#507224); +#507224 = FILL_AREA_STYLE('',(#507225)); +#507225 = FILL_AREA_STYLE_COLOUR('',#506700); +#507226 = OVER_RIDING_STYLED_ITEM('overriding color',(#507227),#84624, + #506656); +#507227 = PRESENTATION_STYLE_ASSIGNMENT((#507228)); +#507228 = SURFACE_STYLE_USAGE(.BOTH.,#507229); +#507229 = SURFACE_SIDE_STYLE('',(#507230)); +#507230 = SURFACE_STYLE_FILL_AREA(#507231); +#507231 = FILL_AREA_STYLE('',(#507232)); +#507232 = FILL_AREA_STYLE_COLOUR('',#506700); +#507233 = OVER_RIDING_STYLED_ITEM('overriding color',(#507234),#84657, + #506656); +#507234 = PRESENTATION_STYLE_ASSIGNMENT((#507235)); +#507235 = SURFACE_STYLE_USAGE(.BOTH.,#507236); +#507236 = SURFACE_SIDE_STYLE('',(#507237)); +#507237 = SURFACE_STYLE_FILL_AREA(#507238); +#507238 = FILL_AREA_STYLE('',(#507239)); +#507239 = FILL_AREA_STYLE_COLOUR('',#506700); +#507240 = OVER_RIDING_STYLED_ITEM('overriding color',(#507241),#84681, + #506656); +#507241 = PRESENTATION_STYLE_ASSIGNMENT((#507242)); +#507242 = SURFACE_STYLE_USAGE(.BOTH.,#507243); +#507243 = SURFACE_SIDE_STYLE('',(#507244)); +#507244 = SURFACE_STYLE_FILL_AREA(#507245); +#507245 = FILL_AREA_STYLE('',(#507246)); +#507246 = FILL_AREA_STYLE_COLOUR('',#506700); +#507247 = OVER_RIDING_STYLED_ITEM('overriding color',(#507248),#84714, + #506656); +#507248 = PRESENTATION_STYLE_ASSIGNMENT((#507249)); +#507249 = SURFACE_STYLE_USAGE(.BOTH.,#507250); +#507250 = SURFACE_SIDE_STYLE('',(#507251)); +#507251 = SURFACE_STYLE_FILL_AREA(#507252); +#507252 = FILL_AREA_STYLE('',(#507253)); +#507253 = FILL_AREA_STYLE_COLOUR('',#506700); +#507254 = OVER_RIDING_STYLED_ITEM('overriding color',(#507255),#84738, + #506656); +#507255 = PRESENTATION_STYLE_ASSIGNMENT((#507256)); +#507256 = SURFACE_STYLE_USAGE(.BOTH.,#507257); +#507257 = SURFACE_SIDE_STYLE('',(#507258)); +#507258 = SURFACE_STYLE_FILL_AREA(#507259); +#507259 = FILL_AREA_STYLE('',(#507260)); +#507260 = FILL_AREA_STYLE_COLOUR('',#506700); +#507261 = OVER_RIDING_STYLED_ITEM('overriding color',(#507262),#84771, + #506656); +#507262 = PRESENTATION_STYLE_ASSIGNMENT((#507263)); +#507263 = SURFACE_STYLE_USAGE(.BOTH.,#507264); +#507264 = SURFACE_SIDE_STYLE('',(#507265)); +#507265 = SURFACE_STYLE_FILL_AREA(#507266); +#507266 = FILL_AREA_STYLE('',(#507267)); +#507267 = FILL_AREA_STYLE_COLOUR('',#506700); +#507268 = OVER_RIDING_STYLED_ITEM('overriding color',(#507269),#84795, + #506656); +#507269 = PRESENTATION_STYLE_ASSIGNMENT((#507270)); +#507270 = SURFACE_STYLE_USAGE(.BOTH.,#507271); +#507271 = SURFACE_SIDE_STYLE('',(#507272)); +#507272 = SURFACE_STYLE_FILL_AREA(#507273); +#507273 = FILL_AREA_STYLE('',(#507274)); +#507274 = FILL_AREA_STYLE_COLOUR('',#506700); +#507275 = OVER_RIDING_STYLED_ITEM('overriding color',(#507276),#84835, + #506656); +#507276 = PRESENTATION_STYLE_ASSIGNMENT((#507277)); +#507277 = SURFACE_STYLE_USAGE(.BOTH.,#507278); +#507278 = SURFACE_SIDE_STYLE('',(#507279)); +#507279 = SURFACE_STYLE_FILL_AREA(#507280); +#507280 = FILL_AREA_STYLE('',(#507281)); +#507281 = FILL_AREA_STYLE_COLOUR('',#506700); +#507282 = OVER_RIDING_STYLED_ITEM('overriding color',(#507283),#84875, + #506656); +#507283 = PRESENTATION_STYLE_ASSIGNMENT((#507284)); +#507284 = SURFACE_STYLE_USAGE(.BOTH.,#507285); +#507285 = SURFACE_SIDE_STYLE('',(#507286)); +#507286 = SURFACE_STYLE_FILL_AREA(#507287); +#507287 = FILL_AREA_STYLE('',(#507288)); +#507288 = FILL_AREA_STYLE_COLOUR('',#506700); +#507289 = OVER_RIDING_STYLED_ITEM('overriding color',(#507290),#84915, + #506656); +#507290 = PRESENTATION_STYLE_ASSIGNMENT((#507291)); +#507291 = SURFACE_STYLE_USAGE(.BOTH.,#507292); +#507292 = SURFACE_SIDE_STYLE('',(#507293)); +#507293 = SURFACE_STYLE_FILL_AREA(#507294); +#507294 = FILL_AREA_STYLE('',(#507295)); +#507295 = FILL_AREA_STYLE_COLOUR('',#506700); +#507296 = OVER_RIDING_STYLED_ITEM('overriding color',(#507297),#84955, + #506656); +#507297 = PRESENTATION_STYLE_ASSIGNMENT((#507298)); +#507298 = SURFACE_STYLE_USAGE(.BOTH.,#507299); +#507299 = SURFACE_SIDE_STYLE('',(#507300)); +#507300 = SURFACE_STYLE_FILL_AREA(#507301); +#507301 = FILL_AREA_STYLE('',(#507302)); +#507302 = FILL_AREA_STYLE_COLOUR('',#506700); +#507303 = OVER_RIDING_STYLED_ITEM('overriding color',(#507304),#84995, + #506656); +#507304 = PRESENTATION_STYLE_ASSIGNMENT((#507305)); +#507305 = SURFACE_STYLE_USAGE(.BOTH.,#507306); +#507306 = SURFACE_SIDE_STYLE('',(#507307)); +#507307 = SURFACE_STYLE_FILL_AREA(#507308); +#507308 = FILL_AREA_STYLE('',(#507309)); +#507309 = FILL_AREA_STYLE_COLOUR('',#506700); +#507310 = OVER_RIDING_STYLED_ITEM('overriding color',(#507311),#85053, + #506656); +#507311 = PRESENTATION_STYLE_ASSIGNMENT((#507312)); +#507312 = SURFACE_STYLE_USAGE(.BOTH.,#507313); +#507313 = SURFACE_SIDE_STYLE('',(#507314)); +#507314 = SURFACE_STYLE_FILL_AREA(#507315); +#507315 = FILL_AREA_STYLE('',(#507316)); +#507316 = FILL_AREA_STYLE_COLOUR('',#506700); +#507317 = OVER_RIDING_STYLED_ITEM('overriding color',(#507318),#85093, + #506656); +#507318 = PRESENTATION_STYLE_ASSIGNMENT((#507319)); +#507319 = SURFACE_STYLE_USAGE(.BOTH.,#507320); +#507320 = SURFACE_SIDE_STYLE('',(#507321)); +#507321 = SURFACE_STYLE_FILL_AREA(#507322); +#507322 = FILL_AREA_STYLE('',(#507323)); +#507323 = FILL_AREA_STYLE_COLOUR('',#506700); +#507324 = OVER_RIDING_STYLED_ITEM('overriding color',(#507325),#85151, + #506656); +#507325 = PRESENTATION_STYLE_ASSIGNMENT((#507326)); +#507326 = SURFACE_STYLE_USAGE(.BOTH.,#507327); +#507327 = SURFACE_SIDE_STYLE('',(#507328)); +#507328 = SURFACE_STYLE_FILL_AREA(#507329); +#507329 = FILL_AREA_STYLE('',(#507330)); +#507330 = FILL_AREA_STYLE_COLOUR('',#506700); +#507331 = OVER_RIDING_STYLED_ITEM('overriding color',(#507332),#85184, + #506656); +#507332 = PRESENTATION_STYLE_ASSIGNMENT((#507333)); +#507333 = SURFACE_STYLE_USAGE(.BOTH.,#507334); +#507334 = SURFACE_SIDE_STYLE('',(#507335)); +#507335 = SURFACE_STYLE_FILL_AREA(#507336); +#507336 = FILL_AREA_STYLE('',(#507337)); +#507337 = FILL_AREA_STYLE_COLOUR('',#506700); +#507338 = OVER_RIDING_STYLED_ITEM('overriding color',(#507339),#85217, + #506656); +#507339 = PRESENTATION_STYLE_ASSIGNMENT((#507340)); +#507340 = SURFACE_STYLE_USAGE(.BOTH.,#507341); +#507341 = SURFACE_SIDE_STYLE('',(#507342)); +#507342 = SURFACE_STYLE_FILL_AREA(#507343); +#507343 = FILL_AREA_STYLE('',(#507344)); +#507344 = FILL_AREA_STYLE_COLOUR('',#506700); +#507345 = OVER_RIDING_STYLED_ITEM('overriding color',(#507346),#85241, + #506656); +#507346 = PRESENTATION_STYLE_ASSIGNMENT((#507347)); +#507347 = SURFACE_STYLE_USAGE(.BOTH.,#507348); +#507348 = SURFACE_SIDE_STYLE('',(#507349)); +#507349 = SURFACE_STYLE_FILL_AREA(#507350); +#507350 = FILL_AREA_STYLE('',(#507351)); +#507351 = FILL_AREA_STYLE_COLOUR('',#506700); +#507352 = OVER_RIDING_STYLED_ITEM('overriding color',(#507353),#85274, + #506656); +#507353 = PRESENTATION_STYLE_ASSIGNMENT((#507354)); +#507354 = SURFACE_STYLE_USAGE(.BOTH.,#507355); +#507355 = SURFACE_SIDE_STYLE('',(#507356)); +#507356 = SURFACE_STYLE_FILL_AREA(#507357); +#507357 = FILL_AREA_STYLE('',(#507358)); +#507358 = FILL_AREA_STYLE_COLOUR('',#506700); +#507359 = OVER_RIDING_STYLED_ITEM('overriding color',(#507360),#85305, + #506656); +#507360 = PRESENTATION_STYLE_ASSIGNMENT((#507361)); +#507361 = SURFACE_STYLE_USAGE(.BOTH.,#507362); +#507362 = SURFACE_SIDE_STYLE('',(#507363)); +#507363 = SURFACE_STYLE_FILL_AREA(#507364); +#507364 = FILL_AREA_STYLE('',(#507365)); +#507365 = FILL_AREA_STYLE_COLOUR('',#506700); +#507366 = OVER_RIDING_STYLED_ITEM('overriding color',(#507367),#85345, + #506656); +#507367 = PRESENTATION_STYLE_ASSIGNMENT((#507368)); +#507368 = SURFACE_STYLE_USAGE(.BOTH.,#507369); +#507369 = SURFACE_SIDE_STYLE('',(#507370)); +#507370 = SURFACE_STYLE_FILL_AREA(#507371); +#507371 = FILL_AREA_STYLE('',(#507372)); +#507372 = FILL_AREA_STYLE_COLOUR('',#506700); +#507373 = OVER_RIDING_STYLED_ITEM('overriding color',(#507374),#85403, + #506656); +#507374 = PRESENTATION_STYLE_ASSIGNMENT((#507375)); +#507375 = SURFACE_STYLE_USAGE(.BOTH.,#507376); +#507376 = SURFACE_SIDE_STYLE('',(#507377)); +#507377 = SURFACE_STYLE_FILL_AREA(#507378); +#507378 = FILL_AREA_STYLE('',(#507379)); +#507379 = FILL_AREA_STYLE_COLOUR('',#506700); +#507380 = OVER_RIDING_STYLED_ITEM('overriding color',(#507381),#85443, + #506656); +#507381 = PRESENTATION_STYLE_ASSIGNMENT((#507382)); +#507382 = SURFACE_STYLE_USAGE(.BOTH.,#507383); +#507383 = SURFACE_SIDE_STYLE('',(#507384)); +#507384 = SURFACE_STYLE_FILL_AREA(#507385); +#507385 = FILL_AREA_STYLE('',(#507386)); +#507386 = FILL_AREA_STYLE_COLOUR('',#506700); +#507387 = OVER_RIDING_STYLED_ITEM('overriding color',(#507388),#85501, + #506656); +#507388 = PRESENTATION_STYLE_ASSIGNMENT((#507389)); +#507389 = SURFACE_STYLE_USAGE(.BOTH.,#507390); +#507390 = SURFACE_SIDE_STYLE('',(#507391)); +#507391 = SURFACE_STYLE_FILL_AREA(#507392); +#507392 = FILL_AREA_STYLE('',(#507393)); +#507393 = FILL_AREA_STYLE_COLOUR('',#506700); +#507394 = OVER_RIDING_STYLED_ITEM('overriding color',(#507395),#85525, + #506656); +#507395 = PRESENTATION_STYLE_ASSIGNMENT((#507396)); +#507396 = SURFACE_STYLE_USAGE(.BOTH.,#507397); +#507397 = SURFACE_SIDE_STYLE('',(#507398)); +#507398 = SURFACE_STYLE_FILL_AREA(#507399); +#507399 = FILL_AREA_STYLE('',(#507400)); +#507400 = FILL_AREA_STYLE_COLOUR('',#506700); +#507401 = OVER_RIDING_STYLED_ITEM('overriding color',(#507402),#85558, + #506656); +#507402 = PRESENTATION_STYLE_ASSIGNMENT((#507403)); +#507403 = SURFACE_STYLE_USAGE(.BOTH.,#507404); +#507404 = SURFACE_SIDE_STYLE('',(#507405)); +#507405 = SURFACE_STYLE_FILL_AREA(#507406); +#507406 = FILL_AREA_STYLE('',(#507407)); +#507407 = FILL_AREA_STYLE_COLOUR('',#506700); +#507408 = OVER_RIDING_STYLED_ITEM('overriding color',(#507409),#85591, + #506656); +#507409 = PRESENTATION_STYLE_ASSIGNMENT((#507410)); +#507410 = SURFACE_STYLE_USAGE(.BOTH.,#507411); +#507411 = SURFACE_SIDE_STYLE('',(#507412)); +#507412 = SURFACE_STYLE_FILL_AREA(#507413); +#507413 = FILL_AREA_STYLE('',(#507414)); +#507414 = FILL_AREA_STYLE_COLOUR('',#506700); +#507415 = OVER_RIDING_STYLED_ITEM('overriding color',(#507416),#85624, + #506656); +#507416 = PRESENTATION_STYLE_ASSIGNMENT((#507417)); +#507417 = SURFACE_STYLE_USAGE(.BOTH.,#507418); +#507418 = SURFACE_SIDE_STYLE('',(#507419)); +#507419 = SURFACE_STYLE_FILL_AREA(#507420); +#507420 = FILL_AREA_STYLE('',(#507421)); +#507421 = FILL_AREA_STYLE_COLOUR('',#506700); +#507422 = OVER_RIDING_STYLED_ITEM('overriding color',(#507423),#85664, + #506656); +#507423 = PRESENTATION_STYLE_ASSIGNMENT((#507424)); +#507424 = SURFACE_STYLE_USAGE(.BOTH.,#507425); +#507425 = SURFACE_SIDE_STYLE('',(#507426)); +#507426 = SURFACE_STYLE_FILL_AREA(#507427); +#507427 = FILL_AREA_STYLE('',(#507428)); +#507428 = FILL_AREA_STYLE_COLOUR('',#506700); +#507429 = OVER_RIDING_STYLED_ITEM('overriding color',(#507430),#85688, + #506656); +#507430 = PRESENTATION_STYLE_ASSIGNMENT((#507431)); +#507431 = SURFACE_STYLE_USAGE(.BOTH.,#507432); +#507432 = SURFACE_SIDE_STYLE('',(#507433)); +#507433 = SURFACE_STYLE_FILL_AREA(#507434); +#507434 = FILL_AREA_STYLE('',(#507435)); +#507435 = FILL_AREA_STYLE_COLOUR('',#506700); +#507436 = OVER_RIDING_STYLED_ITEM('overriding color',(#507437),#85712, + #506656); +#507437 = PRESENTATION_STYLE_ASSIGNMENT((#507438)); +#507438 = SURFACE_STYLE_USAGE(.BOTH.,#507439); +#507439 = SURFACE_SIDE_STYLE('',(#507440)); +#507440 = SURFACE_STYLE_FILL_AREA(#507441); +#507441 = FILL_AREA_STYLE('',(#507442)); +#507442 = FILL_AREA_STYLE_COLOUR('',#506700); +#507443 = OVER_RIDING_STYLED_ITEM('overriding color',(#507444),#85736, + #506656); +#507444 = PRESENTATION_STYLE_ASSIGNMENT((#507445)); +#507445 = SURFACE_STYLE_USAGE(.BOTH.,#507446); +#507446 = SURFACE_SIDE_STYLE('',(#507447)); +#507447 = SURFACE_STYLE_FILL_AREA(#507448); +#507448 = FILL_AREA_STYLE('',(#507449)); +#507449 = FILL_AREA_STYLE_COLOUR('',#506700); +#507450 = OVER_RIDING_STYLED_ITEM('overriding color',(#507451),#85760, + #506656); +#507451 = PRESENTATION_STYLE_ASSIGNMENT((#507452)); +#507452 = SURFACE_STYLE_USAGE(.BOTH.,#507453); +#507453 = SURFACE_SIDE_STYLE('',(#507454)); +#507454 = SURFACE_STYLE_FILL_AREA(#507455); +#507455 = FILL_AREA_STYLE('',(#507456)); +#507456 = FILL_AREA_STYLE_COLOUR('',#506700); +#507457 = OVER_RIDING_STYLED_ITEM('overriding color',(#507458),#85793, + #506656); +#507458 = PRESENTATION_STYLE_ASSIGNMENT((#507459)); +#507459 = SURFACE_STYLE_USAGE(.BOTH.,#507460); +#507460 = SURFACE_SIDE_STYLE('',(#507461)); +#507461 = SURFACE_STYLE_FILL_AREA(#507462); +#507462 = FILL_AREA_STYLE('',(#507463)); +#507463 = FILL_AREA_STYLE_COLOUR('',#506700); +#507464 = OVER_RIDING_STYLED_ITEM('overriding color',(#507465),#85835, + #506656); +#507465 = PRESENTATION_STYLE_ASSIGNMENT((#507466)); +#507466 = SURFACE_STYLE_USAGE(.BOTH.,#507467); +#507467 = SURFACE_SIDE_STYLE('',(#507468)); +#507468 = SURFACE_STYLE_FILL_AREA(#507469); +#507469 = FILL_AREA_STYLE('',(#507470)); +#507470 = FILL_AREA_STYLE_COLOUR('',#506700); +#507471 = OVER_RIDING_STYLED_ITEM('overriding color',(#507472),#85868, + #506656); +#507472 = PRESENTATION_STYLE_ASSIGNMENT((#507473)); +#507473 = SURFACE_STYLE_USAGE(.BOTH.,#507474); +#507474 = SURFACE_SIDE_STYLE('',(#507475)); +#507475 = SURFACE_STYLE_FILL_AREA(#507476); +#507476 = FILL_AREA_STYLE('',(#507477)); +#507477 = FILL_AREA_STYLE_COLOUR('',#506700); +#507478 = OVER_RIDING_STYLED_ITEM('overriding color',(#507479),#85910, + #506656); +#507479 = PRESENTATION_STYLE_ASSIGNMENT((#507480)); +#507480 = SURFACE_STYLE_USAGE(.BOTH.,#507481); +#507481 = SURFACE_SIDE_STYLE('',(#507482)); +#507482 = SURFACE_STYLE_FILL_AREA(#507483); +#507483 = FILL_AREA_STYLE('',(#507484)); +#507484 = FILL_AREA_STYLE_COLOUR('',#506700); +#507485 = OVER_RIDING_STYLED_ITEM('overriding color',(#507486),#85934, + #506656); +#507486 = PRESENTATION_STYLE_ASSIGNMENT((#507487)); +#507487 = SURFACE_STYLE_USAGE(.BOTH.,#507488); +#507488 = SURFACE_SIDE_STYLE('',(#507489)); +#507489 = SURFACE_STYLE_FILL_AREA(#507490); +#507490 = FILL_AREA_STYLE('',(#507491)); +#507491 = FILL_AREA_STYLE_COLOUR('',#506700); +#507492 = OVER_RIDING_STYLED_ITEM('overriding color',(#507493),#85958, + #506656); +#507493 = PRESENTATION_STYLE_ASSIGNMENT((#507494)); +#507494 = SURFACE_STYLE_USAGE(.BOTH.,#507495); +#507495 = SURFACE_SIDE_STYLE('',(#507496)); +#507496 = SURFACE_STYLE_FILL_AREA(#507497); +#507497 = FILL_AREA_STYLE('',(#507498)); +#507498 = FILL_AREA_STYLE_COLOUR('',#506700); +#507499 = OVER_RIDING_STYLED_ITEM('overriding color',(#507500),#85982, + #506656); +#507500 = PRESENTATION_STYLE_ASSIGNMENT((#507501)); +#507501 = SURFACE_STYLE_USAGE(.BOTH.,#507502); +#507502 = SURFACE_SIDE_STYLE('',(#507503)); +#507503 = SURFACE_STYLE_FILL_AREA(#507504); +#507504 = FILL_AREA_STYLE('',(#507505)); +#507505 = FILL_AREA_STYLE_COLOUR('',#506700); +#507506 = OVER_RIDING_STYLED_ITEM('overriding color',(#507507),#86006, + #506656); +#507507 = PRESENTATION_STYLE_ASSIGNMENT((#507508)); +#507508 = SURFACE_STYLE_USAGE(.BOTH.,#507509); +#507509 = SURFACE_SIDE_STYLE('',(#507510)); +#507510 = SURFACE_STYLE_FILL_AREA(#507511); +#507511 = FILL_AREA_STYLE('',(#507512)); +#507512 = FILL_AREA_STYLE_COLOUR('',#506700); +#507513 = OVER_RIDING_STYLED_ITEM('overriding color',(#507514),#86030, + #506656); +#507514 = PRESENTATION_STYLE_ASSIGNMENT((#507515)); +#507515 = SURFACE_STYLE_USAGE(.BOTH.,#507516); +#507516 = SURFACE_SIDE_STYLE('',(#507517)); +#507517 = SURFACE_STYLE_FILL_AREA(#507518); +#507518 = FILL_AREA_STYLE('',(#507519)); +#507519 = FILL_AREA_STYLE_COLOUR('',#506700); +#507520 = OVER_RIDING_STYLED_ITEM('overriding color',(#507521),#86048, + #506656); +#507521 = PRESENTATION_STYLE_ASSIGNMENT((#507522)); +#507522 = SURFACE_STYLE_USAGE(.BOTH.,#507523); +#507523 = SURFACE_SIDE_STYLE('',(#507524)); +#507524 = SURFACE_STYLE_FILL_AREA(#507525); +#507525 = FILL_AREA_STYLE('',(#507526)); +#507526 = FILL_AREA_STYLE_COLOUR('',#506700); +#507527 = OVER_RIDING_STYLED_ITEM('overriding color',(#507528),#86066, + #506656); +#507528 = PRESENTATION_STYLE_ASSIGNMENT((#507529)); +#507529 = SURFACE_STYLE_USAGE(.BOTH.,#507530); +#507530 = SURFACE_SIDE_STYLE('',(#507531)); +#507531 = SURFACE_STYLE_FILL_AREA(#507532); +#507532 = FILL_AREA_STYLE('',(#507533)); +#507533 = FILL_AREA_STYLE_COLOUR('',#506700); +#507534 = OVER_RIDING_STYLED_ITEM('overriding color',(#507535),#86084, + #506656); +#507535 = PRESENTATION_STYLE_ASSIGNMENT((#507536)); +#507536 = SURFACE_STYLE_USAGE(.BOTH.,#507537); +#507537 = SURFACE_SIDE_STYLE('',(#507538)); +#507538 = SURFACE_STYLE_FILL_AREA(#507539); +#507539 = FILL_AREA_STYLE('',(#507540)); +#507540 = FILL_AREA_STYLE_COLOUR('',#506700); +#507541 = OVER_RIDING_STYLED_ITEM('overriding color',(#507542),#86102, + #506656); +#507542 = PRESENTATION_STYLE_ASSIGNMENT((#507543)); +#507543 = SURFACE_STYLE_USAGE(.BOTH.,#507544); +#507544 = SURFACE_SIDE_STYLE('',(#507545)); +#507545 = SURFACE_STYLE_FILL_AREA(#507546); +#507546 = FILL_AREA_STYLE('',(#507547)); +#507547 = FILL_AREA_STYLE_COLOUR('',#506700); +#507548 = OVER_RIDING_STYLED_ITEM('overriding color',(#507549),#86120, + #506656); +#507549 = PRESENTATION_STYLE_ASSIGNMENT((#507550)); +#507550 = SURFACE_STYLE_USAGE(.BOTH.,#507551); +#507551 = SURFACE_SIDE_STYLE('',(#507552)); +#507552 = SURFACE_STYLE_FILL_AREA(#507553); +#507553 = FILL_AREA_STYLE('',(#507554)); +#507554 = FILL_AREA_STYLE_COLOUR('',#506700); +#507555 = OVER_RIDING_STYLED_ITEM('overriding color',(#507556),#86138, + #506656); +#507556 = PRESENTATION_STYLE_ASSIGNMENT((#507557)); +#507557 = SURFACE_STYLE_USAGE(.BOTH.,#507558); +#507558 = SURFACE_SIDE_STYLE('',(#507559)); +#507559 = SURFACE_STYLE_FILL_AREA(#507560); +#507560 = FILL_AREA_STYLE('',(#507561)); +#507561 = FILL_AREA_STYLE_COLOUR('',#506700); +#507562 = OVER_RIDING_STYLED_ITEM('overriding color',(#507563),#86156, + #506656); +#507563 = PRESENTATION_STYLE_ASSIGNMENT((#507564)); +#507564 = SURFACE_STYLE_USAGE(.BOTH.,#507565); +#507565 = SURFACE_SIDE_STYLE('',(#507566)); +#507566 = SURFACE_STYLE_FILL_AREA(#507567); +#507567 = FILL_AREA_STYLE('',(#507568)); +#507568 = FILL_AREA_STYLE_COLOUR('',#506700); +#507569 = OVER_RIDING_STYLED_ITEM('overriding color',(#507570),#86174, + #506656); +#507570 = PRESENTATION_STYLE_ASSIGNMENT((#507571)); +#507571 = SURFACE_STYLE_USAGE(.BOTH.,#507572); +#507572 = SURFACE_SIDE_STYLE('',(#507573)); +#507573 = SURFACE_STYLE_FILL_AREA(#507574); +#507574 = FILL_AREA_STYLE('',(#507575)); +#507575 = FILL_AREA_STYLE_COLOUR('',#506700); +#507576 = OVER_RIDING_STYLED_ITEM('overriding color',(#507577),#86192, + #506656); +#507577 = PRESENTATION_STYLE_ASSIGNMENT((#507578)); +#507578 = SURFACE_STYLE_USAGE(.BOTH.,#507579); +#507579 = SURFACE_SIDE_STYLE('',(#507580)); +#507580 = SURFACE_STYLE_FILL_AREA(#507581); +#507581 = FILL_AREA_STYLE('',(#507582)); +#507582 = FILL_AREA_STYLE_COLOUR('',#506700); +#507583 = OVER_RIDING_STYLED_ITEM('overriding color',(#507584),#86210, + #506656); +#507584 = PRESENTATION_STYLE_ASSIGNMENT((#507585)); +#507585 = SURFACE_STYLE_USAGE(.BOTH.,#507586); +#507586 = SURFACE_SIDE_STYLE('',(#507587)); +#507587 = SURFACE_STYLE_FILL_AREA(#507588); +#507588 = FILL_AREA_STYLE('',(#507589)); +#507589 = FILL_AREA_STYLE_COLOUR('',#506700); +#507590 = OVER_RIDING_STYLED_ITEM('overriding color',(#507591),#86228, + #506656); +#507591 = PRESENTATION_STYLE_ASSIGNMENT((#507592)); +#507592 = SURFACE_STYLE_USAGE(.BOTH.,#507593); +#507593 = SURFACE_SIDE_STYLE('',(#507594)); +#507594 = SURFACE_STYLE_FILL_AREA(#507595); +#507595 = FILL_AREA_STYLE('',(#507596)); +#507596 = FILL_AREA_STYLE_COLOUR('',#506700); +#507597 = OVER_RIDING_STYLED_ITEM('overriding color',(#507598),#86246, + #506656); +#507598 = PRESENTATION_STYLE_ASSIGNMENT((#507599)); +#507599 = SURFACE_STYLE_USAGE(.BOTH.,#507600); +#507600 = SURFACE_SIDE_STYLE('',(#507601)); +#507601 = SURFACE_STYLE_FILL_AREA(#507602); +#507602 = FILL_AREA_STYLE('',(#507603)); +#507603 = FILL_AREA_STYLE_COLOUR('',#506700); +#507604 = OVER_RIDING_STYLED_ITEM('overriding color',(#507605),#86264, + #506656); +#507605 = PRESENTATION_STYLE_ASSIGNMENT((#507606)); +#507606 = SURFACE_STYLE_USAGE(.BOTH.,#507607); +#507607 = SURFACE_SIDE_STYLE('',(#507608)); +#507608 = SURFACE_STYLE_FILL_AREA(#507609); +#507609 = FILL_AREA_STYLE('',(#507610)); +#507610 = FILL_AREA_STYLE_COLOUR('',#506700); +#507611 = OVER_RIDING_STYLED_ITEM('overriding color',(#507612),#86282, + #506656); +#507612 = PRESENTATION_STYLE_ASSIGNMENT((#507613)); +#507613 = SURFACE_STYLE_USAGE(.BOTH.,#507614); +#507614 = SURFACE_SIDE_STYLE('',(#507615)); +#507615 = SURFACE_STYLE_FILL_AREA(#507616); +#507616 = FILL_AREA_STYLE('',(#507617)); +#507617 = FILL_AREA_STYLE_COLOUR('',#506700); +#507618 = OVER_RIDING_STYLED_ITEM('overriding color',(#507619),#86300, + #506656); +#507619 = PRESENTATION_STYLE_ASSIGNMENT((#507620)); +#507620 = SURFACE_STYLE_USAGE(.BOTH.,#507621); +#507621 = SURFACE_SIDE_STYLE('',(#507622)); +#507622 = SURFACE_STYLE_FILL_AREA(#507623); +#507623 = FILL_AREA_STYLE('',(#507624)); +#507624 = FILL_AREA_STYLE_COLOUR('',#506700); +#507625 = OVER_RIDING_STYLED_ITEM('overriding color',(#507626),#86318, + #506656); +#507626 = PRESENTATION_STYLE_ASSIGNMENT((#507627)); +#507627 = SURFACE_STYLE_USAGE(.BOTH.,#507628); +#507628 = SURFACE_SIDE_STYLE('',(#507629)); +#507629 = SURFACE_STYLE_FILL_AREA(#507630); +#507630 = FILL_AREA_STYLE('',(#507631)); +#507631 = FILL_AREA_STYLE_COLOUR('',#506700); +#507632 = OVER_RIDING_STYLED_ITEM('overriding color',(#507633),#86336, + #506656); +#507633 = PRESENTATION_STYLE_ASSIGNMENT((#507634)); +#507634 = SURFACE_STYLE_USAGE(.BOTH.,#507635); +#507635 = SURFACE_SIDE_STYLE('',(#507636)); +#507636 = SURFACE_STYLE_FILL_AREA(#507637); +#507637 = FILL_AREA_STYLE('',(#507638)); +#507638 = FILL_AREA_STYLE_COLOUR('',#506700); +#507639 = OVER_RIDING_STYLED_ITEM('overriding color',(#507640),#86354, + #506656); +#507640 = PRESENTATION_STYLE_ASSIGNMENT((#507641)); +#507641 = SURFACE_STYLE_USAGE(.BOTH.,#507642); +#507642 = SURFACE_SIDE_STYLE('',(#507643)); +#507643 = SURFACE_STYLE_FILL_AREA(#507644); +#507644 = FILL_AREA_STYLE('',(#507645)); +#507645 = FILL_AREA_STYLE_COLOUR('',#506700); +#507646 = OVER_RIDING_STYLED_ITEM('overriding color',(#507647),#86372, + #506656); +#507647 = PRESENTATION_STYLE_ASSIGNMENT((#507648)); +#507648 = SURFACE_STYLE_USAGE(.BOTH.,#507649); +#507649 = SURFACE_SIDE_STYLE('',(#507650)); +#507650 = SURFACE_STYLE_FILL_AREA(#507651); +#507651 = FILL_AREA_STYLE('',(#507652)); +#507652 = FILL_AREA_STYLE_COLOUR('',#506700); +#507653 = OVER_RIDING_STYLED_ITEM('overriding color',(#507654),#86384, + #506656); +#507654 = PRESENTATION_STYLE_ASSIGNMENT((#507655)); +#507655 = SURFACE_STYLE_USAGE(.BOTH.,#507656); +#507656 = SURFACE_SIDE_STYLE('',(#507657)); +#507657 = SURFACE_STYLE_FILL_AREA(#507658); +#507658 = FILL_AREA_STYLE('',(#507659)); +#507659 = FILL_AREA_STYLE_COLOUR('',#506700); +#507660 = OVER_RIDING_STYLED_ITEM('overriding color',(#507661),#86408, + #506656); +#507661 = PRESENTATION_STYLE_ASSIGNMENT((#507662)); +#507662 = SURFACE_STYLE_USAGE(.BOTH.,#507663); +#507663 = SURFACE_SIDE_STYLE('',(#507664)); +#507664 = SURFACE_STYLE_FILL_AREA(#507665); +#507665 = FILL_AREA_STYLE('',(#507666)); +#507666 = FILL_AREA_STYLE_COLOUR('',#506700); +#507667 = OVER_RIDING_STYLED_ITEM('overriding color',(#507668),#86426, + #506656); +#507668 = PRESENTATION_STYLE_ASSIGNMENT((#507669)); +#507669 = SURFACE_STYLE_USAGE(.BOTH.,#507670); +#507670 = SURFACE_SIDE_STYLE('',(#507671)); +#507671 = SURFACE_STYLE_FILL_AREA(#507672); +#507672 = FILL_AREA_STYLE('',(#507673)); +#507673 = FILL_AREA_STYLE_COLOUR('',#506700); +#507674 = OVER_RIDING_STYLED_ITEM('overriding color',(#507675),#86444, + #506656); +#507675 = PRESENTATION_STYLE_ASSIGNMENT((#507676)); +#507676 = SURFACE_STYLE_USAGE(.BOTH.,#507677); +#507677 = SURFACE_SIDE_STYLE('',(#507678)); +#507678 = SURFACE_STYLE_FILL_AREA(#507679); +#507679 = FILL_AREA_STYLE('',(#507680)); +#507680 = FILL_AREA_STYLE_COLOUR('',#506700); +#507681 = OVER_RIDING_STYLED_ITEM('overriding color',(#507682),#86462, + #506656); +#507682 = PRESENTATION_STYLE_ASSIGNMENT((#507683)); +#507683 = SURFACE_STYLE_USAGE(.BOTH.,#507684); +#507684 = SURFACE_SIDE_STYLE('',(#507685)); +#507685 = SURFACE_STYLE_FILL_AREA(#507686); +#507686 = FILL_AREA_STYLE('',(#507687)); +#507687 = FILL_AREA_STYLE_COLOUR('',#506700); +#507688 = OVER_RIDING_STYLED_ITEM('overriding color',(#507689),#86480, + #506656); +#507689 = PRESENTATION_STYLE_ASSIGNMENT((#507690)); +#507690 = SURFACE_STYLE_USAGE(.BOTH.,#507691); +#507691 = SURFACE_SIDE_STYLE('',(#507692)); +#507692 = SURFACE_STYLE_FILL_AREA(#507693); +#507693 = FILL_AREA_STYLE('',(#507694)); +#507694 = FILL_AREA_STYLE_COLOUR('',#506700); +#507695 = OVER_RIDING_STYLED_ITEM('overriding color',(#507696),#86498, + #506656); +#507696 = PRESENTATION_STYLE_ASSIGNMENT((#507697)); +#507697 = SURFACE_STYLE_USAGE(.BOTH.,#507698); +#507698 = SURFACE_SIDE_STYLE('',(#507699)); +#507699 = SURFACE_STYLE_FILL_AREA(#507700); +#507700 = FILL_AREA_STYLE('',(#507701)); +#507701 = FILL_AREA_STYLE_COLOUR('',#506700); +#507702 = OVER_RIDING_STYLED_ITEM('overriding color',(#507703),#86516, + #506656); +#507703 = PRESENTATION_STYLE_ASSIGNMENT((#507704)); +#507704 = SURFACE_STYLE_USAGE(.BOTH.,#507705); +#507705 = SURFACE_SIDE_STYLE('',(#507706)); +#507706 = SURFACE_STYLE_FILL_AREA(#507707); +#507707 = FILL_AREA_STYLE('',(#507708)); +#507708 = FILL_AREA_STYLE_COLOUR('',#506700); +#507709 = OVER_RIDING_STYLED_ITEM('overriding color',(#507710),#86534, + #506656); +#507710 = PRESENTATION_STYLE_ASSIGNMENT((#507711)); +#507711 = SURFACE_STYLE_USAGE(.BOTH.,#507712); +#507712 = SURFACE_SIDE_STYLE('',(#507713)); +#507713 = SURFACE_STYLE_FILL_AREA(#507714); +#507714 = FILL_AREA_STYLE('',(#507715)); +#507715 = FILL_AREA_STYLE_COLOUR('',#506700); +#507716 = OVER_RIDING_STYLED_ITEM('overriding color',(#507717),#86552, + #506656); +#507717 = PRESENTATION_STYLE_ASSIGNMENT((#507718)); +#507718 = SURFACE_STYLE_USAGE(.BOTH.,#507719); +#507719 = SURFACE_SIDE_STYLE('',(#507720)); +#507720 = SURFACE_STYLE_FILL_AREA(#507721); +#507721 = FILL_AREA_STYLE('',(#507722)); +#507722 = FILL_AREA_STYLE_COLOUR('',#506700); +#507723 = OVER_RIDING_STYLED_ITEM('overriding color',(#507724),#86570, + #506656); +#507724 = PRESENTATION_STYLE_ASSIGNMENT((#507725)); +#507725 = SURFACE_STYLE_USAGE(.BOTH.,#507726); +#507726 = SURFACE_SIDE_STYLE('',(#507727)); +#507727 = SURFACE_STYLE_FILL_AREA(#507728); +#507728 = FILL_AREA_STYLE('',(#507729)); +#507729 = FILL_AREA_STYLE_COLOUR('',#506700); +#507730 = OVER_RIDING_STYLED_ITEM('overriding color',(#507731),#86588, + #506656); +#507731 = PRESENTATION_STYLE_ASSIGNMENT((#507732)); +#507732 = SURFACE_STYLE_USAGE(.BOTH.,#507733); +#507733 = SURFACE_SIDE_STYLE('',(#507734)); +#507734 = SURFACE_STYLE_FILL_AREA(#507735); +#507735 = FILL_AREA_STYLE('',(#507736)); +#507736 = FILL_AREA_STYLE_COLOUR('',#506700); +#507737 = OVER_RIDING_STYLED_ITEM('overriding color',(#507738),#86606, + #506656); +#507738 = PRESENTATION_STYLE_ASSIGNMENT((#507739)); +#507739 = SURFACE_STYLE_USAGE(.BOTH.,#507740); +#507740 = SURFACE_SIDE_STYLE('',(#507741)); +#507741 = SURFACE_STYLE_FILL_AREA(#507742); +#507742 = FILL_AREA_STYLE('',(#507743)); +#507743 = FILL_AREA_STYLE_COLOUR('',#506700); +#507744 = OVER_RIDING_STYLED_ITEM('overriding color',(#507745),#86624, + #506656); +#507745 = PRESENTATION_STYLE_ASSIGNMENT((#507746)); +#507746 = SURFACE_STYLE_USAGE(.BOTH.,#507747); +#507747 = SURFACE_SIDE_STYLE('',(#507748)); +#507748 = SURFACE_STYLE_FILL_AREA(#507749); +#507749 = FILL_AREA_STYLE('',(#507750)); +#507750 = FILL_AREA_STYLE_COLOUR('',#506700); +#507751 = OVER_RIDING_STYLED_ITEM('overriding color',(#507752),#86642, + #506656); +#507752 = PRESENTATION_STYLE_ASSIGNMENT((#507753)); +#507753 = SURFACE_STYLE_USAGE(.BOTH.,#507754); +#507754 = SURFACE_SIDE_STYLE('',(#507755)); +#507755 = SURFACE_STYLE_FILL_AREA(#507756); +#507756 = FILL_AREA_STYLE('',(#507757)); +#507757 = FILL_AREA_STYLE_COLOUR('',#506700); +#507758 = OVER_RIDING_STYLED_ITEM('overriding color',(#507759),#86660, + #506656); +#507759 = PRESENTATION_STYLE_ASSIGNMENT((#507760)); +#507760 = SURFACE_STYLE_USAGE(.BOTH.,#507761); +#507761 = SURFACE_SIDE_STYLE('',(#507762)); +#507762 = SURFACE_STYLE_FILL_AREA(#507763); +#507763 = FILL_AREA_STYLE('',(#507764)); +#507764 = FILL_AREA_STYLE_COLOUR('',#506700); +#507765 = OVER_RIDING_STYLED_ITEM('overriding color',(#507766),#86678, + #506656); +#507766 = PRESENTATION_STYLE_ASSIGNMENT((#507767)); +#507767 = SURFACE_STYLE_USAGE(.BOTH.,#507768); +#507768 = SURFACE_SIDE_STYLE('',(#507769)); +#507769 = SURFACE_STYLE_FILL_AREA(#507770); +#507770 = FILL_AREA_STYLE('',(#507771)); +#507771 = FILL_AREA_STYLE_COLOUR('',#506700); +#507772 = OVER_RIDING_STYLED_ITEM('overriding color',(#507773),#86696, + #506656); +#507773 = PRESENTATION_STYLE_ASSIGNMENT((#507774)); +#507774 = SURFACE_STYLE_USAGE(.BOTH.,#507775); +#507775 = SURFACE_SIDE_STYLE('',(#507776)); +#507776 = SURFACE_STYLE_FILL_AREA(#507777); +#507777 = FILL_AREA_STYLE('',(#507778)); +#507778 = FILL_AREA_STYLE_COLOUR('',#506700); +#507779 = OVER_RIDING_STYLED_ITEM('overriding color',(#507780),#86714, + #506656); +#507780 = PRESENTATION_STYLE_ASSIGNMENT((#507781)); +#507781 = SURFACE_STYLE_USAGE(.BOTH.,#507782); +#507782 = SURFACE_SIDE_STYLE('',(#507783)); +#507783 = SURFACE_STYLE_FILL_AREA(#507784); +#507784 = FILL_AREA_STYLE('',(#507785)); +#507785 = FILL_AREA_STYLE_COLOUR('',#506700); +#507786 = OVER_RIDING_STYLED_ITEM('overriding color',(#507787),#86732, + #506656); +#507787 = PRESENTATION_STYLE_ASSIGNMENT((#507788)); +#507788 = SURFACE_STYLE_USAGE(.BOTH.,#507789); +#507789 = SURFACE_SIDE_STYLE('',(#507790)); +#507790 = SURFACE_STYLE_FILL_AREA(#507791); +#507791 = FILL_AREA_STYLE('',(#507792)); +#507792 = FILL_AREA_STYLE_COLOUR('',#506700); +#507793 = OVER_RIDING_STYLED_ITEM('overriding color',(#507794),#86750, + #506656); +#507794 = PRESENTATION_STYLE_ASSIGNMENT((#507795)); +#507795 = SURFACE_STYLE_USAGE(.BOTH.,#507796); +#507796 = SURFACE_SIDE_STYLE('',(#507797)); +#507797 = SURFACE_STYLE_FILL_AREA(#507798); +#507798 = FILL_AREA_STYLE('',(#507799)); +#507799 = FILL_AREA_STYLE_COLOUR('',#506700); +#507800 = OVER_RIDING_STYLED_ITEM('overriding color',(#507801),#86762, + #506656); +#507801 = PRESENTATION_STYLE_ASSIGNMENT((#507802)); +#507802 = SURFACE_STYLE_USAGE(.BOTH.,#507803); +#507803 = SURFACE_SIDE_STYLE('',(#507804)); +#507804 = SURFACE_STYLE_FILL_AREA(#507805); +#507805 = FILL_AREA_STYLE('',(#507806)); +#507806 = FILL_AREA_STYLE_COLOUR('',#506700); +#507807 = OVER_RIDING_STYLED_ITEM('overriding color',(#507808),#86786, + #506656); +#507808 = PRESENTATION_STYLE_ASSIGNMENT((#507809)); +#507809 = SURFACE_STYLE_USAGE(.BOTH.,#507810); +#507810 = SURFACE_SIDE_STYLE('',(#507811)); +#507811 = SURFACE_STYLE_FILL_AREA(#507812); +#507812 = FILL_AREA_STYLE('',(#507813)); +#507813 = FILL_AREA_STYLE_COLOUR('',#506700); +#507814 = OVER_RIDING_STYLED_ITEM('overriding color',(#507815),#86804, + #506656); +#507815 = PRESENTATION_STYLE_ASSIGNMENT((#507816)); +#507816 = SURFACE_STYLE_USAGE(.BOTH.,#507817); +#507817 = SURFACE_SIDE_STYLE('',(#507818)); +#507818 = SURFACE_STYLE_FILL_AREA(#507819); +#507819 = FILL_AREA_STYLE('',(#507820)); +#507820 = FILL_AREA_STYLE_COLOUR('',#506700); +#507821 = OVER_RIDING_STYLED_ITEM('overriding color',(#507822),#86822, + #506656); +#507822 = PRESENTATION_STYLE_ASSIGNMENT((#507823)); +#507823 = SURFACE_STYLE_USAGE(.BOTH.,#507824); +#507824 = SURFACE_SIDE_STYLE('',(#507825)); +#507825 = SURFACE_STYLE_FILL_AREA(#507826); +#507826 = FILL_AREA_STYLE('',(#507827)); +#507827 = FILL_AREA_STYLE_COLOUR('',#506700); +#507828 = OVER_RIDING_STYLED_ITEM('overriding color',(#507829),#86840, + #506656); +#507829 = PRESENTATION_STYLE_ASSIGNMENT((#507830)); +#507830 = SURFACE_STYLE_USAGE(.BOTH.,#507831); +#507831 = SURFACE_SIDE_STYLE('',(#507832)); +#507832 = SURFACE_STYLE_FILL_AREA(#507833); +#507833 = FILL_AREA_STYLE('',(#507834)); +#507834 = FILL_AREA_STYLE_COLOUR('',#506700); +#507835 = OVER_RIDING_STYLED_ITEM('overriding color',(#507836),#86858, + #506656); +#507836 = PRESENTATION_STYLE_ASSIGNMENT((#507837)); +#507837 = SURFACE_STYLE_USAGE(.BOTH.,#507838); +#507838 = SURFACE_SIDE_STYLE('',(#507839)); +#507839 = SURFACE_STYLE_FILL_AREA(#507840); +#507840 = FILL_AREA_STYLE('',(#507841)); +#507841 = FILL_AREA_STYLE_COLOUR('',#506700); +#507842 = OVER_RIDING_STYLED_ITEM('overriding color',(#507843),#86876, + #506656); +#507843 = PRESENTATION_STYLE_ASSIGNMENT((#507844)); +#507844 = SURFACE_STYLE_USAGE(.BOTH.,#507845); +#507845 = SURFACE_SIDE_STYLE('',(#507846)); +#507846 = SURFACE_STYLE_FILL_AREA(#507847); +#507847 = FILL_AREA_STYLE('',(#507848)); +#507848 = FILL_AREA_STYLE_COLOUR('',#506700); +#507849 = OVER_RIDING_STYLED_ITEM('overriding color',(#507850),#86894, + #506656); +#507850 = PRESENTATION_STYLE_ASSIGNMENT((#507851)); +#507851 = SURFACE_STYLE_USAGE(.BOTH.,#507852); +#507852 = SURFACE_SIDE_STYLE('',(#507853)); +#507853 = SURFACE_STYLE_FILL_AREA(#507854); +#507854 = FILL_AREA_STYLE('',(#507855)); +#507855 = FILL_AREA_STYLE_COLOUR('',#506700); +#507856 = OVER_RIDING_STYLED_ITEM('overriding color',(#507857),#86912, + #506656); +#507857 = PRESENTATION_STYLE_ASSIGNMENT((#507858)); +#507858 = SURFACE_STYLE_USAGE(.BOTH.,#507859); +#507859 = SURFACE_SIDE_STYLE('',(#507860)); +#507860 = SURFACE_STYLE_FILL_AREA(#507861); +#507861 = FILL_AREA_STYLE('',(#507862)); +#507862 = FILL_AREA_STYLE_COLOUR('',#506700); +#507863 = OVER_RIDING_STYLED_ITEM('overriding color',(#507864),#86930, + #506656); +#507864 = PRESENTATION_STYLE_ASSIGNMENT((#507865)); +#507865 = SURFACE_STYLE_USAGE(.BOTH.,#507866); +#507866 = SURFACE_SIDE_STYLE('',(#507867)); +#507867 = SURFACE_STYLE_FILL_AREA(#507868); +#507868 = FILL_AREA_STYLE('',(#507869)); +#507869 = FILL_AREA_STYLE_COLOUR('',#506700); +#507870 = OVER_RIDING_STYLED_ITEM('overriding color',(#507871),#86948, + #506656); +#507871 = PRESENTATION_STYLE_ASSIGNMENT((#507872)); +#507872 = SURFACE_STYLE_USAGE(.BOTH.,#507873); +#507873 = SURFACE_SIDE_STYLE('',(#507874)); +#507874 = SURFACE_STYLE_FILL_AREA(#507875); +#507875 = FILL_AREA_STYLE('',(#507876)); +#507876 = FILL_AREA_STYLE_COLOUR('',#506700); +#507877 = OVER_RIDING_STYLED_ITEM('overriding color',(#507878),#86966, + #506656); +#507878 = PRESENTATION_STYLE_ASSIGNMENT((#507879)); +#507879 = SURFACE_STYLE_USAGE(.BOTH.,#507880); +#507880 = SURFACE_SIDE_STYLE('',(#507881)); +#507881 = SURFACE_STYLE_FILL_AREA(#507882); +#507882 = FILL_AREA_STYLE('',(#507883)); +#507883 = FILL_AREA_STYLE_COLOUR('',#506700); +#507884 = OVER_RIDING_STYLED_ITEM('overriding color',(#507885),#86984, + #506656); +#507885 = PRESENTATION_STYLE_ASSIGNMENT((#507886)); +#507886 = SURFACE_STYLE_USAGE(.BOTH.,#507887); +#507887 = SURFACE_SIDE_STYLE('',(#507888)); +#507888 = SURFACE_STYLE_FILL_AREA(#507889); +#507889 = FILL_AREA_STYLE('',(#507890)); +#507890 = FILL_AREA_STYLE_COLOUR('',#506700); +#507891 = OVER_RIDING_STYLED_ITEM('overriding color',(#507892),#87002, + #506656); +#507892 = PRESENTATION_STYLE_ASSIGNMENT((#507893)); +#507893 = SURFACE_STYLE_USAGE(.BOTH.,#507894); +#507894 = SURFACE_SIDE_STYLE('',(#507895)); +#507895 = SURFACE_STYLE_FILL_AREA(#507896); +#507896 = FILL_AREA_STYLE('',(#507897)); +#507897 = FILL_AREA_STYLE_COLOUR('',#506700); +#507898 = OVER_RIDING_STYLED_ITEM('overriding color',(#507899),#87020, + #506656); +#507899 = PRESENTATION_STYLE_ASSIGNMENT((#507900)); +#507900 = SURFACE_STYLE_USAGE(.BOTH.,#507901); +#507901 = SURFACE_SIDE_STYLE('',(#507902)); +#507902 = SURFACE_STYLE_FILL_AREA(#507903); +#507903 = FILL_AREA_STYLE('',(#507904)); +#507904 = FILL_AREA_STYLE_COLOUR('',#506700); +#507905 = OVER_RIDING_STYLED_ITEM('overriding color',(#507906),#87038, + #506656); +#507906 = PRESENTATION_STYLE_ASSIGNMENT((#507907)); +#507907 = SURFACE_STYLE_USAGE(.BOTH.,#507908); +#507908 = SURFACE_SIDE_STYLE('',(#507909)); +#507909 = SURFACE_STYLE_FILL_AREA(#507910); +#507910 = FILL_AREA_STYLE('',(#507911)); +#507911 = FILL_AREA_STYLE_COLOUR('',#506700); +#507912 = OVER_RIDING_STYLED_ITEM('overriding color',(#507913),#87056, + #506656); +#507913 = PRESENTATION_STYLE_ASSIGNMENT((#507914)); +#507914 = SURFACE_STYLE_USAGE(.BOTH.,#507915); +#507915 = SURFACE_SIDE_STYLE('',(#507916)); +#507916 = SURFACE_STYLE_FILL_AREA(#507917); +#507917 = FILL_AREA_STYLE('',(#507918)); +#507918 = FILL_AREA_STYLE_COLOUR('',#506700); +#507919 = OVER_RIDING_STYLED_ITEM('overriding color',(#507920),#87074, + #506656); +#507920 = PRESENTATION_STYLE_ASSIGNMENT((#507921)); +#507921 = SURFACE_STYLE_USAGE(.BOTH.,#507922); +#507922 = SURFACE_SIDE_STYLE('',(#507923)); +#507923 = SURFACE_STYLE_FILL_AREA(#507924); +#507924 = FILL_AREA_STYLE('',(#507925)); +#507925 = FILL_AREA_STYLE_COLOUR('',#506700); +#507926 = OVER_RIDING_STYLED_ITEM('overriding color',(#507927),#87092, + #506656); +#507927 = PRESENTATION_STYLE_ASSIGNMENT((#507928)); +#507928 = SURFACE_STYLE_USAGE(.BOTH.,#507929); +#507929 = SURFACE_SIDE_STYLE('',(#507930)); +#507930 = SURFACE_STYLE_FILL_AREA(#507931); +#507931 = FILL_AREA_STYLE('',(#507932)); +#507932 = FILL_AREA_STYLE_COLOUR('',#506700); +#507933 = OVER_RIDING_STYLED_ITEM('overriding color',(#507934),#87110, + #506656); +#507934 = PRESENTATION_STYLE_ASSIGNMENT((#507935)); +#507935 = SURFACE_STYLE_USAGE(.BOTH.,#507936); +#507936 = SURFACE_SIDE_STYLE('',(#507937)); +#507937 = SURFACE_STYLE_FILL_AREA(#507938); +#507938 = FILL_AREA_STYLE('',(#507939)); +#507939 = FILL_AREA_STYLE_COLOUR('',#506700); +#507940 = OVER_RIDING_STYLED_ITEM('overriding color',(#507941),#87128, + #506656); +#507941 = PRESENTATION_STYLE_ASSIGNMENT((#507942)); +#507942 = SURFACE_STYLE_USAGE(.BOTH.,#507943); +#507943 = SURFACE_SIDE_STYLE('',(#507944)); +#507944 = SURFACE_STYLE_FILL_AREA(#507945); +#507945 = FILL_AREA_STYLE('',(#507946)); +#507946 = FILL_AREA_STYLE_COLOUR('',#506700); +#507947 = OVER_RIDING_STYLED_ITEM('overriding color',(#507948),#87140, + #506656); +#507948 = PRESENTATION_STYLE_ASSIGNMENT((#507949)); +#507949 = SURFACE_STYLE_USAGE(.BOTH.,#507950); +#507950 = SURFACE_SIDE_STYLE('',(#507951)); +#507951 = SURFACE_STYLE_FILL_AREA(#507952); +#507952 = FILL_AREA_STYLE('',(#507953)); +#507953 = FILL_AREA_STYLE_COLOUR('',#506700); +#507954 = OVER_RIDING_STYLED_ITEM('overriding color',(#507955),#87164, + #506656); +#507955 = PRESENTATION_STYLE_ASSIGNMENT((#507956)); +#507956 = SURFACE_STYLE_USAGE(.BOTH.,#507957); +#507957 = SURFACE_SIDE_STYLE('',(#507958)); +#507958 = SURFACE_STYLE_FILL_AREA(#507959); +#507959 = FILL_AREA_STYLE('',(#507960)); +#507960 = FILL_AREA_STYLE_COLOUR('',#506700); +#507961 = OVER_RIDING_STYLED_ITEM('overriding color',(#507962),#87182, + #506656); +#507962 = PRESENTATION_STYLE_ASSIGNMENT((#507963)); +#507963 = SURFACE_STYLE_USAGE(.BOTH.,#507964); +#507964 = SURFACE_SIDE_STYLE('',(#507965)); +#507965 = SURFACE_STYLE_FILL_AREA(#507966); +#507966 = FILL_AREA_STYLE('',(#507967)); +#507967 = FILL_AREA_STYLE_COLOUR('',#506700); +#507968 = OVER_RIDING_STYLED_ITEM('overriding color',(#507969),#87200, + #506656); +#507969 = PRESENTATION_STYLE_ASSIGNMENT((#507970)); +#507970 = SURFACE_STYLE_USAGE(.BOTH.,#507971); +#507971 = SURFACE_SIDE_STYLE('',(#507972)); +#507972 = SURFACE_STYLE_FILL_AREA(#507973); +#507973 = FILL_AREA_STYLE('',(#507974)); +#507974 = FILL_AREA_STYLE_COLOUR('',#506700); +#507975 = OVER_RIDING_STYLED_ITEM('overriding color',(#507976),#87218, + #506656); +#507976 = PRESENTATION_STYLE_ASSIGNMENT((#507977)); +#507977 = SURFACE_STYLE_USAGE(.BOTH.,#507978); +#507978 = SURFACE_SIDE_STYLE('',(#507979)); +#507979 = SURFACE_STYLE_FILL_AREA(#507980); +#507980 = FILL_AREA_STYLE('',(#507981)); +#507981 = FILL_AREA_STYLE_COLOUR('',#506700); +#507982 = OVER_RIDING_STYLED_ITEM('overriding color',(#507983),#87236, + #506656); +#507983 = PRESENTATION_STYLE_ASSIGNMENT((#507984)); +#507984 = SURFACE_STYLE_USAGE(.BOTH.,#507985); +#507985 = SURFACE_SIDE_STYLE('',(#507986)); +#507986 = SURFACE_STYLE_FILL_AREA(#507987); +#507987 = FILL_AREA_STYLE('',(#507988)); +#507988 = FILL_AREA_STYLE_COLOUR('',#506700); +#507989 = OVER_RIDING_STYLED_ITEM('overriding color',(#507990),#87254, + #506656); +#507990 = PRESENTATION_STYLE_ASSIGNMENT((#507991)); +#507991 = SURFACE_STYLE_USAGE(.BOTH.,#507992); +#507992 = SURFACE_SIDE_STYLE('',(#507993)); +#507993 = SURFACE_STYLE_FILL_AREA(#507994); +#507994 = FILL_AREA_STYLE('',(#507995)); +#507995 = FILL_AREA_STYLE_COLOUR('',#506700); +#507996 = OVER_RIDING_STYLED_ITEM('overriding color',(#507997),#87272, + #506656); +#507997 = PRESENTATION_STYLE_ASSIGNMENT((#507998)); +#507998 = SURFACE_STYLE_USAGE(.BOTH.,#507999); +#507999 = SURFACE_SIDE_STYLE('',(#508000)); +#508000 = SURFACE_STYLE_FILL_AREA(#508001); +#508001 = FILL_AREA_STYLE('',(#508002)); +#508002 = FILL_AREA_STYLE_COLOUR('',#506700); +#508003 = OVER_RIDING_STYLED_ITEM('overriding color',(#508004),#87290, + #506656); +#508004 = PRESENTATION_STYLE_ASSIGNMENT((#508005)); +#508005 = SURFACE_STYLE_USAGE(.BOTH.,#508006); +#508006 = SURFACE_SIDE_STYLE('',(#508007)); +#508007 = SURFACE_STYLE_FILL_AREA(#508008); +#508008 = FILL_AREA_STYLE('',(#508009)); +#508009 = FILL_AREA_STYLE_COLOUR('',#506700); +#508010 = OVER_RIDING_STYLED_ITEM('overriding color',(#508011),#87308, + #506656); +#508011 = PRESENTATION_STYLE_ASSIGNMENT((#508012)); +#508012 = SURFACE_STYLE_USAGE(.BOTH.,#508013); +#508013 = SURFACE_SIDE_STYLE('',(#508014)); +#508014 = SURFACE_STYLE_FILL_AREA(#508015); +#508015 = FILL_AREA_STYLE('',(#508016)); +#508016 = FILL_AREA_STYLE_COLOUR('',#506700); +#508017 = OVER_RIDING_STYLED_ITEM('overriding color',(#508018),#87326, + #506656); +#508018 = PRESENTATION_STYLE_ASSIGNMENT((#508019)); +#508019 = SURFACE_STYLE_USAGE(.BOTH.,#508020); +#508020 = SURFACE_SIDE_STYLE('',(#508021)); +#508021 = SURFACE_STYLE_FILL_AREA(#508022); +#508022 = FILL_AREA_STYLE('',(#508023)); +#508023 = FILL_AREA_STYLE_COLOUR('',#506700); +#508024 = OVER_RIDING_STYLED_ITEM('overriding color',(#508025),#87344, + #506656); +#508025 = PRESENTATION_STYLE_ASSIGNMENT((#508026)); +#508026 = SURFACE_STYLE_USAGE(.BOTH.,#508027); +#508027 = SURFACE_SIDE_STYLE('',(#508028)); +#508028 = SURFACE_STYLE_FILL_AREA(#508029); +#508029 = FILL_AREA_STYLE('',(#508030)); +#508030 = FILL_AREA_STYLE_COLOUR('',#506700); +#508031 = OVER_RIDING_STYLED_ITEM('overriding color',(#508032),#87362, + #506656); +#508032 = PRESENTATION_STYLE_ASSIGNMENT((#508033)); +#508033 = SURFACE_STYLE_USAGE(.BOTH.,#508034); +#508034 = SURFACE_SIDE_STYLE('',(#508035)); +#508035 = SURFACE_STYLE_FILL_AREA(#508036); +#508036 = FILL_AREA_STYLE('',(#508037)); +#508037 = FILL_AREA_STYLE_COLOUR('',#506700); +#508038 = OVER_RIDING_STYLED_ITEM('overriding color',(#508039),#87380, + #506656); +#508039 = PRESENTATION_STYLE_ASSIGNMENT((#508040)); +#508040 = SURFACE_STYLE_USAGE(.BOTH.,#508041); +#508041 = SURFACE_SIDE_STYLE('',(#508042)); +#508042 = SURFACE_STYLE_FILL_AREA(#508043); +#508043 = FILL_AREA_STYLE('',(#508044)); +#508044 = FILL_AREA_STYLE_COLOUR('',#506700); +#508045 = OVER_RIDING_STYLED_ITEM('overriding color',(#508046),#87398, + #506656); +#508046 = PRESENTATION_STYLE_ASSIGNMENT((#508047)); +#508047 = SURFACE_STYLE_USAGE(.BOTH.,#508048); +#508048 = SURFACE_SIDE_STYLE('',(#508049)); +#508049 = SURFACE_STYLE_FILL_AREA(#508050); +#508050 = FILL_AREA_STYLE('',(#508051)); +#508051 = FILL_AREA_STYLE_COLOUR('',#506700); +#508052 = OVER_RIDING_STYLED_ITEM('overriding color',(#508053),#87416, + #506656); +#508053 = PRESENTATION_STYLE_ASSIGNMENT((#508054)); +#508054 = SURFACE_STYLE_USAGE(.BOTH.,#508055); +#508055 = SURFACE_SIDE_STYLE('',(#508056)); +#508056 = SURFACE_STYLE_FILL_AREA(#508057); +#508057 = FILL_AREA_STYLE('',(#508058)); +#508058 = FILL_AREA_STYLE_COLOUR('',#506700); +#508059 = OVER_RIDING_STYLED_ITEM('overriding color',(#508060),#87434, + #506656); +#508060 = PRESENTATION_STYLE_ASSIGNMENT((#508061)); +#508061 = SURFACE_STYLE_USAGE(.BOTH.,#508062); +#508062 = SURFACE_SIDE_STYLE('',(#508063)); +#508063 = SURFACE_STYLE_FILL_AREA(#508064); +#508064 = FILL_AREA_STYLE('',(#508065)); +#508065 = FILL_AREA_STYLE_COLOUR('',#506700); +#508066 = OVER_RIDING_STYLED_ITEM('overriding color',(#508067),#87452, + #506656); +#508067 = PRESENTATION_STYLE_ASSIGNMENT((#508068)); +#508068 = SURFACE_STYLE_USAGE(.BOTH.,#508069); +#508069 = SURFACE_SIDE_STYLE('',(#508070)); +#508070 = SURFACE_STYLE_FILL_AREA(#508071); +#508071 = FILL_AREA_STYLE('',(#508072)); +#508072 = FILL_AREA_STYLE_COLOUR('',#506700); +#508073 = OVER_RIDING_STYLED_ITEM('overriding color',(#508074),#87470, + #506656); +#508074 = PRESENTATION_STYLE_ASSIGNMENT((#508075)); +#508075 = SURFACE_STYLE_USAGE(.BOTH.,#508076); +#508076 = SURFACE_SIDE_STYLE('',(#508077)); +#508077 = SURFACE_STYLE_FILL_AREA(#508078); +#508078 = FILL_AREA_STYLE('',(#508079)); +#508079 = FILL_AREA_STYLE_COLOUR('',#506700); +#508080 = OVER_RIDING_STYLED_ITEM('overriding color',(#508081),#87488, + #506656); +#508081 = PRESENTATION_STYLE_ASSIGNMENT((#508082)); +#508082 = SURFACE_STYLE_USAGE(.BOTH.,#508083); +#508083 = SURFACE_SIDE_STYLE('',(#508084)); +#508084 = SURFACE_STYLE_FILL_AREA(#508085); +#508085 = FILL_AREA_STYLE('',(#508086)); +#508086 = FILL_AREA_STYLE_COLOUR('',#506700); +#508087 = OVER_RIDING_STYLED_ITEM('overriding color',(#508088),#87506, + #506656); +#508088 = PRESENTATION_STYLE_ASSIGNMENT((#508089)); +#508089 = SURFACE_STYLE_USAGE(.BOTH.,#508090); +#508090 = SURFACE_SIDE_STYLE('',(#508091)); +#508091 = SURFACE_STYLE_FILL_AREA(#508092); +#508092 = FILL_AREA_STYLE('',(#508093)); +#508093 = FILL_AREA_STYLE_COLOUR('',#506700); +#508094 = OVER_RIDING_STYLED_ITEM('overriding color',(#508095),#87518, + #506656); +#508095 = PRESENTATION_STYLE_ASSIGNMENT((#508096)); +#508096 = SURFACE_STYLE_USAGE(.BOTH.,#508097); +#508097 = SURFACE_SIDE_STYLE('',(#508098)); +#508098 = SURFACE_STYLE_FILL_AREA(#508099); +#508099 = FILL_AREA_STYLE('',(#508100)); +#508100 = FILL_AREA_STYLE_COLOUR('',#506700); +#508101 = OVER_RIDING_STYLED_ITEM('overriding color',(#508102),#87542, + #506656); +#508102 = PRESENTATION_STYLE_ASSIGNMENT((#508103)); +#508103 = SURFACE_STYLE_USAGE(.BOTH.,#508104); +#508104 = SURFACE_SIDE_STYLE('',(#508105)); +#508105 = SURFACE_STYLE_FILL_AREA(#508106); +#508106 = FILL_AREA_STYLE('',(#508107)); +#508107 = FILL_AREA_STYLE_COLOUR('',#506700); +#508108 = OVER_RIDING_STYLED_ITEM('overriding color',(#508109),#87560, + #506656); +#508109 = PRESENTATION_STYLE_ASSIGNMENT((#508110)); +#508110 = SURFACE_STYLE_USAGE(.BOTH.,#508111); +#508111 = SURFACE_SIDE_STYLE('',(#508112)); +#508112 = SURFACE_STYLE_FILL_AREA(#508113); +#508113 = FILL_AREA_STYLE('',(#508114)); +#508114 = FILL_AREA_STYLE_COLOUR('',#506700); +#508115 = OVER_RIDING_STYLED_ITEM('overriding color',(#508116),#87578, + #506656); +#508116 = PRESENTATION_STYLE_ASSIGNMENT((#508117)); +#508117 = SURFACE_STYLE_USAGE(.BOTH.,#508118); +#508118 = SURFACE_SIDE_STYLE('',(#508119)); +#508119 = SURFACE_STYLE_FILL_AREA(#508120); +#508120 = FILL_AREA_STYLE('',(#508121)); +#508121 = FILL_AREA_STYLE_COLOUR('',#506700); +#508122 = OVER_RIDING_STYLED_ITEM('overriding color',(#508123),#87596, + #506656); +#508123 = PRESENTATION_STYLE_ASSIGNMENT((#508124)); +#508124 = SURFACE_STYLE_USAGE(.BOTH.,#508125); +#508125 = SURFACE_SIDE_STYLE('',(#508126)); +#508126 = SURFACE_STYLE_FILL_AREA(#508127); +#508127 = FILL_AREA_STYLE('',(#508128)); +#508128 = FILL_AREA_STYLE_COLOUR('',#506700); +#508129 = OVER_RIDING_STYLED_ITEM('overriding color',(#508130),#87614, + #506656); +#508130 = PRESENTATION_STYLE_ASSIGNMENT((#508131)); +#508131 = SURFACE_STYLE_USAGE(.BOTH.,#508132); +#508132 = SURFACE_SIDE_STYLE('',(#508133)); +#508133 = SURFACE_STYLE_FILL_AREA(#508134); +#508134 = FILL_AREA_STYLE('',(#508135)); +#508135 = FILL_AREA_STYLE_COLOUR('',#506700); +#508136 = OVER_RIDING_STYLED_ITEM('overriding color',(#508137),#87632, + #506656); +#508137 = PRESENTATION_STYLE_ASSIGNMENT((#508138)); +#508138 = SURFACE_STYLE_USAGE(.BOTH.,#508139); +#508139 = SURFACE_SIDE_STYLE('',(#508140)); +#508140 = SURFACE_STYLE_FILL_AREA(#508141); +#508141 = FILL_AREA_STYLE('',(#508142)); +#508142 = FILL_AREA_STYLE_COLOUR('',#506700); +#508143 = OVER_RIDING_STYLED_ITEM('overriding color',(#508144),#87650, + #506656); +#508144 = PRESENTATION_STYLE_ASSIGNMENT((#508145)); +#508145 = SURFACE_STYLE_USAGE(.BOTH.,#508146); +#508146 = SURFACE_SIDE_STYLE('',(#508147)); +#508147 = SURFACE_STYLE_FILL_AREA(#508148); +#508148 = FILL_AREA_STYLE('',(#508149)); +#508149 = FILL_AREA_STYLE_COLOUR('',#506700); +#508150 = OVER_RIDING_STYLED_ITEM('overriding color',(#508151),#87668, + #506656); +#508151 = PRESENTATION_STYLE_ASSIGNMENT((#508152)); +#508152 = SURFACE_STYLE_USAGE(.BOTH.,#508153); +#508153 = SURFACE_SIDE_STYLE('',(#508154)); +#508154 = SURFACE_STYLE_FILL_AREA(#508155); +#508155 = FILL_AREA_STYLE('',(#508156)); +#508156 = FILL_AREA_STYLE_COLOUR('',#506700); +#508157 = OVER_RIDING_STYLED_ITEM('overriding color',(#508158),#87686, + #506656); +#508158 = PRESENTATION_STYLE_ASSIGNMENT((#508159)); +#508159 = SURFACE_STYLE_USAGE(.BOTH.,#508160); +#508160 = SURFACE_SIDE_STYLE('',(#508161)); +#508161 = SURFACE_STYLE_FILL_AREA(#508162); +#508162 = FILL_AREA_STYLE('',(#508163)); +#508163 = FILL_AREA_STYLE_COLOUR('',#506700); +#508164 = OVER_RIDING_STYLED_ITEM('overriding color',(#508165),#87704, + #506656); +#508165 = PRESENTATION_STYLE_ASSIGNMENT((#508166)); +#508166 = SURFACE_STYLE_USAGE(.BOTH.,#508167); +#508167 = SURFACE_SIDE_STYLE('',(#508168)); +#508168 = SURFACE_STYLE_FILL_AREA(#508169); +#508169 = FILL_AREA_STYLE('',(#508170)); +#508170 = FILL_AREA_STYLE_COLOUR('',#506700); +#508171 = OVER_RIDING_STYLED_ITEM('overriding color',(#508172),#87722, + #506656); +#508172 = PRESENTATION_STYLE_ASSIGNMENT((#508173)); +#508173 = SURFACE_STYLE_USAGE(.BOTH.,#508174); +#508174 = SURFACE_SIDE_STYLE('',(#508175)); +#508175 = SURFACE_STYLE_FILL_AREA(#508176); +#508176 = FILL_AREA_STYLE('',(#508177)); +#508177 = FILL_AREA_STYLE_COLOUR('',#506700); +#508178 = OVER_RIDING_STYLED_ITEM('overriding color',(#508179),#87740, + #506656); +#508179 = PRESENTATION_STYLE_ASSIGNMENT((#508180)); +#508180 = SURFACE_STYLE_USAGE(.BOTH.,#508181); +#508181 = SURFACE_SIDE_STYLE('',(#508182)); +#508182 = SURFACE_STYLE_FILL_AREA(#508183); +#508183 = FILL_AREA_STYLE('',(#508184)); +#508184 = FILL_AREA_STYLE_COLOUR('',#506700); +#508185 = OVER_RIDING_STYLED_ITEM('overriding color',(#508186),#87758, + #506656); +#508186 = PRESENTATION_STYLE_ASSIGNMENT((#508187)); +#508187 = SURFACE_STYLE_USAGE(.BOTH.,#508188); +#508188 = SURFACE_SIDE_STYLE('',(#508189)); +#508189 = SURFACE_STYLE_FILL_AREA(#508190); +#508190 = FILL_AREA_STYLE('',(#508191)); +#508191 = FILL_AREA_STYLE_COLOUR('',#506700); +#508192 = OVER_RIDING_STYLED_ITEM('overriding color',(#508193),#87776, + #506656); +#508193 = PRESENTATION_STYLE_ASSIGNMENT((#508194)); +#508194 = SURFACE_STYLE_USAGE(.BOTH.,#508195); +#508195 = SURFACE_SIDE_STYLE('',(#508196)); +#508196 = SURFACE_STYLE_FILL_AREA(#508197); +#508197 = FILL_AREA_STYLE('',(#508198)); +#508198 = FILL_AREA_STYLE_COLOUR('',#506700); +#508199 = OVER_RIDING_STYLED_ITEM('overriding color',(#508200),#87794, + #506656); +#508200 = PRESENTATION_STYLE_ASSIGNMENT((#508201)); +#508201 = SURFACE_STYLE_USAGE(.BOTH.,#508202); +#508202 = SURFACE_SIDE_STYLE('',(#508203)); +#508203 = SURFACE_STYLE_FILL_AREA(#508204); +#508204 = FILL_AREA_STYLE('',(#508205)); +#508205 = FILL_AREA_STYLE_COLOUR('',#506700); +#508206 = OVER_RIDING_STYLED_ITEM('overriding color',(#508207),#87820, + #506656); +#508207 = PRESENTATION_STYLE_ASSIGNMENT((#508208)); +#508208 = SURFACE_STYLE_USAGE(.BOTH.,#508209); +#508209 = SURFACE_SIDE_STYLE('',(#508210)); +#508210 = SURFACE_STYLE_FILL_AREA(#508211); +#508211 = FILL_AREA_STYLE('',(#508212)); +#508212 = FILL_AREA_STYLE_COLOUR('',#506700); +#508213 = OVER_RIDING_STYLED_ITEM('overriding color',(#508214),#87846, + #506656); +#508214 = PRESENTATION_STYLE_ASSIGNMENT((#508215)); +#508215 = SURFACE_STYLE_USAGE(.BOTH.,#508216); +#508216 = SURFACE_SIDE_STYLE('',(#508217)); +#508217 = SURFACE_STYLE_FILL_AREA(#508218); +#508218 = FILL_AREA_STYLE('',(#508219)); +#508219 = FILL_AREA_STYLE_COLOUR('',#506700); +#508220 = OVER_RIDING_STYLED_ITEM('overriding color',(#508221),#87864, + #506656); +#508221 = PRESENTATION_STYLE_ASSIGNMENT((#508222)); +#508222 = SURFACE_STYLE_USAGE(.BOTH.,#508223); +#508223 = SURFACE_SIDE_STYLE('',(#508224)); +#508224 = SURFACE_STYLE_FILL_AREA(#508225); +#508225 = FILL_AREA_STYLE('',(#508226)); +#508226 = FILL_AREA_STYLE_COLOUR('',#506700); +#508227 = OVER_RIDING_STYLED_ITEM('overriding color',(#508228),#87882, + #506656); +#508228 = PRESENTATION_STYLE_ASSIGNMENT((#508229)); +#508229 = SURFACE_STYLE_USAGE(.BOTH.,#508230); +#508230 = SURFACE_SIDE_STYLE('',(#508231)); +#508231 = SURFACE_STYLE_FILL_AREA(#508232); +#508232 = FILL_AREA_STYLE('',(#508233)); +#508233 = FILL_AREA_STYLE_COLOUR('',#506700); +#508234 = OVER_RIDING_STYLED_ITEM('overriding color',(#508235),#87900, + #506656); +#508235 = PRESENTATION_STYLE_ASSIGNMENT((#508236)); +#508236 = SURFACE_STYLE_USAGE(.BOTH.,#508237); +#508237 = SURFACE_SIDE_STYLE('',(#508238)); +#508238 = SURFACE_STYLE_FILL_AREA(#508239); +#508239 = FILL_AREA_STYLE('',(#508240)); +#508240 = FILL_AREA_STYLE_COLOUR('',#506700); +#508241 = OVER_RIDING_STYLED_ITEM('overriding color',(#508242),#87918, + #506656); +#508242 = PRESENTATION_STYLE_ASSIGNMENT((#508243)); +#508243 = SURFACE_STYLE_USAGE(.BOTH.,#508244); +#508244 = SURFACE_SIDE_STYLE('',(#508245)); +#508245 = SURFACE_STYLE_FILL_AREA(#508246); +#508246 = FILL_AREA_STYLE('',(#508247)); +#508247 = FILL_AREA_STYLE_COLOUR('',#506700); +#508248 = OVER_RIDING_STYLED_ITEM('overriding color',(#508249),#87936, + #506656); +#508249 = PRESENTATION_STYLE_ASSIGNMENT((#508250)); +#508250 = SURFACE_STYLE_USAGE(.BOTH.,#508251); +#508251 = SURFACE_SIDE_STYLE('',(#508252)); +#508252 = SURFACE_STYLE_FILL_AREA(#508253); +#508253 = FILL_AREA_STYLE('',(#508254)); +#508254 = FILL_AREA_STYLE_COLOUR('',#506700); +#508255 = OVER_RIDING_STYLED_ITEM('overriding color',(#508256),#87954, + #506656); +#508256 = PRESENTATION_STYLE_ASSIGNMENT((#508257)); +#508257 = SURFACE_STYLE_USAGE(.BOTH.,#508258); +#508258 = SURFACE_SIDE_STYLE('',(#508259)); +#508259 = SURFACE_STYLE_FILL_AREA(#508260); +#508260 = FILL_AREA_STYLE('',(#508261)); +#508261 = FILL_AREA_STYLE_COLOUR('',#506700); +#508262 = OVER_RIDING_STYLED_ITEM('overriding color',(#508263),#87972, + #506656); +#508263 = PRESENTATION_STYLE_ASSIGNMENT((#508264)); +#508264 = SURFACE_STYLE_USAGE(.BOTH.,#508265); +#508265 = SURFACE_SIDE_STYLE('',(#508266)); +#508266 = SURFACE_STYLE_FILL_AREA(#508267); +#508267 = FILL_AREA_STYLE('',(#508268)); +#508268 = FILL_AREA_STYLE_COLOUR('',#506700); +#508269 = OVER_RIDING_STYLED_ITEM('overriding color',(#508270),#87990, + #506656); +#508270 = PRESENTATION_STYLE_ASSIGNMENT((#508271)); +#508271 = SURFACE_STYLE_USAGE(.BOTH.,#508272); +#508272 = SURFACE_SIDE_STYLE('',(#508273)); +#508273 = SURFACE_STYLE_FILL_AREA(#508274); +#508274 = FILL_AREA_STYLE('',(#508275)); +#508275 = FILL_AREA_STYLE_COLOUR('',#506700); +#508276 = OVER_RIDING_STYLED_ITEM('overriding color',(#508277),#88008, + #506656); +#508277 = PRESENTATION_STYLE_ASSIGNMENT((#508278)); +#508278 = SURFACE_STYLE_USAGE(.BOTH.,#508279); +#508279 = SURFACE_SIDE_STYLE('',(#508280)); +#508280 = SURFACE_STYLE_FILL_AREA(#508281); +#508281 = FILL_AREA_STYLE('',(#508282)); +#508282 = FILL_AREA_STYLE_COLOUR('',#506700); +#508283 = OVER_RIDING_STYLED_ITEM('overriding color',(#508284),#88026, + #506656); +#508284 = PRESENTATION_STYLE_ASSIGNMENT((#508285)); +#508285 = SURFACE_STYLE_USAGE(.BOTH.,#508286); +#508286 = SURFACE_SIDE_STYLE('',(#508287)); +#508287 = SURFACE_STYLE_FILL_AREA(#508288); +#508288 = FILL_AREA_STYLE('',(#508289)); +#508289 = FILL_AREA_STYLE_COLOUR('',#506700); +#508290 = OVER_RIDING_STYLED_ITEM('overriding color',(#508291),#88044, + #506656); +#508291 = PRESENTATION_STYLE_ASSIGNMENT((#508292)); +#508292 = SURFACE_STYLE_USAGE(.BOTH.,#508293); +#508293 = SURFACE_SIDE_STYLE('',(#508294)); +#508294 = SURFACE_STYLE_FILL_AREA(#508295); +#508295 = FILL_AREA_STYLE('',(#508296)); +#508296 = FILL_AREA_STYLE_COLOUR('',#506700); +#508297 = OVER_RIDING_STYLED_ITEM('overriding color',(#508298),#88062, + #506656); +#508298 = PRESENTATION_STYLE_ASSIGNMENT((#508299)); +#508299 = SURFACE_STYLE_USAGE(.BOTH.,#508300); +#508300 = SURFACE_SIDE_STYLE('',(#508301)); +#508301 = SURFACE_STYLE_FILL_AREA(#508302); +#508302 = FILL_AREA_STYLE('',(#508303)); +#508303 = FILL_AREA_STYLE_COLOUR('',#506700); +#508304 = OVER_RIDING_STYLED_ITEM('overriding color',(#508305),#88080, + #506656); +#508305 = PRESENTATION_STYLE_ASSIGNMENT((#508306)); +#508306 = SURFACE_STYLE_USAGE(.BOTH.,#508307); +#508307 = SURFACE_SIDE_STYLE('',(#508308)); +#508308 = SURFACE_STYLE_FILL_AREA(#508309); +#508309 = FILL_AREA_STYLE('',(#508310)); +#508310 = FILL_AREA_STYLE_COLOUR('',#506700); +#508311 = OVER_RIDING_STYLED_ITEM('overriding color',(#508312),#88098, + #506656); +#508312 = PRESENTATION_STYLE_ASSIGNMENT((#508313)); +#508313 = SURFACE_STYLE_USAGE(.BOTH.,#508314); +#508314 = SURFACE_SIDE_STYLE('',(#508315)); +#508315 = SURFACE_STYLE_FILL_AREA(#508316); +#508316 = FILL_AREA_STYLE('',(#508317)); +#508317 = FILL_AREA_STYLE_COLOUR('',#506700); +#508318 = OVER_RIDING_STYLED_ITEM('overriding color',(#508319),#88116, + #506656); +#508319 = PRESENTATION_STYLE_ASSIGNMENT((#508320)); +#508320 = SURFACE_STYLE_USAGE(.BOTH.,#508321); +#508321 = SURFACE_SIDE_STYLE('',(#508322)); +#508322 = SURFACE_STYLE_FILL_AREA(#508323); +#508323 = FILL_AREA_STYLE('',(#508324)); +#508324 = FILL_AREA_STYLE_COLOUR('',#506700); +#508325 = OVER_RIDING_STYLED_ITEM('overriding color',(#508326),#88134, + #506656); +#508326 = PRESENTATION_STYLE_ASSIGNMENT((#508327)); +#508327 = SURFACE_STYLE_USAGE(.BOTH.,#508328); +#508328 = SURFACE_SIDE_STYLE('',(#508329)); +#508329 = SURFACE_STYLE_FILL_AREA(#508330); +#508330 = FILL_AREA_STYLE('',(#508331)); +#508331 = FILL_AREA_STYLE_COLOUR('',#506700); +#508332 = OVER_RIDING_STYLED_ITEM('overriding color',(#508333),#88152, + #506656); +#508333 = PRESENTATION_STYLE_ASSIGNMENT((#508334)); +#508334 = SURFACE_STYLE_USAGE(.BOTH.,#508335); +#508335 = SURFACE_SIDE_STYLE('',(#508336)); +#508336 = SURFACE_STYLE_FILL_AREA(#508337); +#508337 = FILL_AREA_STYLE('',(#508338)); +#508338 = FILL_AREA_STYLE_COLOUR('',#506700); +#508339 = OVER_RIDING_STYLED_ITEM('overriding color',(#508340),#88170, + #506656); +#508340 = PRESENTATION_STYLE_ASSIGNMENT((#508341)); +#508341 = SURFACE_STYLE_USAGE(.BOTH.,#508342); +#508342 = SURFACE_SIDE_STYLE('',(#508343)); +#508343 = SURFACE_STYLE_FILL_AREA(#508344); +#508344 = FILL_AREA_STYLE('',(#508345)); +#508345 = FILL_AREA_STYLE_COLOUR('',#506700); +#508346 = OVER_RIDING_STYLED_ITEM('overriding color',(#508347),#88188, + #506656); +#508347 = PRESENTATION_STYLE_ASSIGNMENT((#508348)); +#508348 = SURFACE_STYLE_USAGE(.BOTH.,#508349); +#508349 = SURFACE_SIDE_STYLE('',(#508350)); +#508350 = SURFACE_STYLE_FILL_AREA(#508351); +#508351 = FILL_AREA_STYLE('',(#508352)); +#508352 = FILL_AREA_STYLE_COLOUR('',#506700); +#508353 = OVER_RIDING_STYLED_ITEM('overriding color',(#508354),#88206, + #506656); +#508354 = PRESENTATION_STYLE_ASSIGNMENT((#508355)); +#508355 = SURFACE_STYLE_USAGE(.BOTH.,#508356); +#508356 = SURFACE_SIDE_STYLE('',(#508357)); +#508357 = SURFACE_STYLE_FILL_AREA(#508358); +#508358 = FILL_AREA_STYLE('',(#508359)); +#508359 = FILL_AREA_STYLE_COLOUR('',#506700); +#508360 = OVER_RIDING_STYLED_ITEM('overriding color',(#508361),#88224, + #506656); +#508361 = PRESENTATION_STYLE_ASSIGNMENT((#508362)); +#508362 = SURFACE_STYLE_USAGE(.BOTH.,#508363); +#508363 = SURFACE_SIDE_STYLE('',(#508364)); +#508364 = SURFACE_STYLE_FILL_AREA(#508365); +#508365 = FILL_AREA_STYLE('',(#508366)); +#508366 = FILL_AREA_STYLE_COLOUR('',#506700); +#508367 = OVER_RIDING_STYLED_ITEM('overriding color',(#508368),#88242, + #506656); +#508368 = PRESENTATION_STYLE_ASSIGNMENT((#508369)); +#508369 = SURFACE_STYLE_USAGE(.BOTH.,#508370); +#508370 = SURFACE_SIDE_STYLE('',(#508371)); +#508371 = SURFACE_STYLE_FILL_AREA(#508372); +#508372 = FILL_AREA_STYLE('',(#508373)); +#508373 = FILL_AREA_STYLE_COLOUR('',#506700); +#508374 = OVER_RIDING_STYLED_ITEM('overriding color',(#508375),#88260, + #506656); +#508375 = PRESENTATION_STYLE_ASSIGNMENT((#508376)); +#508376 = SURFACE_STYLE_USAGE(.BOTH.,#508377); +#508377 = SURFACE_SIDE_STYLE('',(#508378)); +#508378 = SURFACE_STYLE_FILL_AREA(#508379); +#508379 = FILL_AREA_STYLE('',(#508380)); +#508380 = FILL_AREA_STYLE_COLOUR('',#506700); +#508381 = OVER_RIDING_STYLED_ITEM('overriding color',(#508382),#88278, + #506656); +#508382 = PRESENTATION_STYLE_ASSIGNMENT((#508383)); +#508383 = SURFACE_STYLE_USAGE(.BOTH.,#508384); +#508384 = SURFACE_SIDE_STYLE('',(#508385)); +#508385 = SURFACE_STYLE_FILL_AREA(#508386); +#508386 = FILL_AREA_STYLE('',(#508387)); +#508387 = FILL_AREA_STYLE_COLOUR('',#506700); +#508388 = OVER_RIDING_STYLED_ITEM('overriding color',(#508389),#88296, + #506656); +#508389 = PRESENTATION_STYLE_ASSIGNMENT((#508390)); +#508390 = SURFACE_STYLE_USAGE(.BOTH.,#508391); +#508391 = SURFACE_SIDE_STYLE('',(#508392)); +#508392 = SURFACE_STYLE_FILL_AREA(#508393); +#508393 = FILL_AREA_STYLE('',(#508394)); +#508394 = FILL_AREA_STYLE_COLOUR('',#506700); +#508395 = OVER_RIDING_STYLED_ITEM('overriding color',(#508396),#88314, + #506656); +#508396 = PRESENTATION_STYLE_ASSIGNMENT((#508397)); +#508397 = SURFACE_STYLE_USAGE(.BOTH.,#508398); +#508398 = SURFACE_SIDE_STYLE('',(#508399)); +#508399 = SURFACE_STYLE_FILL_AREA(#508400); +#508400 = FILL_AREA_STYLE('',(#508401)); +#508401 = FILL_AREA_STYLE_COLOUR('',#506700); +#508402 = OVER_RIDING_STYLED_ITEM('overriding color',(#508403),#88332, + #506656); +#508403 = PRESENTATION_STYLE_ASSIGNMENT((#508404)); +#508404 = SURFACE_STYLE_USAGE(.BOTH.,#508405); +#508405 = SURFACE_SIDE_STYLE('',(#508406)); +#508406 = SURFACE_STYLE_FILL_AREA(#508407); +#508407 = FILL_AREA_STYLE('',(#508408)); +#508408 = FILL_AREA_STYLE_COLOUR('',#506700); +#508409 = OVER_RIDING_STYLED_ITEM('overriding color',(#508410),#88350, + #506656); +#508410 = PRESENTATION_STYLE_ASSIGNMENT((#508411)); +#508411 = SURFACE_STYLE_USAGE(.BOTH.,#508412); +#508412 = SURFACE_SIDE_STYLE('',(#508413)); +#508413 = SURFACE_STYLE_FILL_AREA(#508414); +#508414 = FILL_AREA_STYLE('',(#508415)); +#508415 = FILL_AREA_STYLE_COLOUR('',#506700); +#508416 = OVER_RIDING_STYLED_ITEM('overriding color',(#508417),#88368, + #506656); +#508417 = PRESENTATION_STYLE_ASSIGNMENT((#508418)); +#508418 = SURFACE_STYLE_USAGE(.BOTH.,#508419); +#508419 = SURFACE_SIDE_STYLE('',(#508420)); +#508420 = SURFACE_STYLE_FILL_AREA(#508421); +#508421 = FILL_AREA_STYLE('',(#508422)); +#508422 = FILL_AREA_STYLE_COLOUR('',#506700); +#508423 = OVER_RIDING_STYLED_ITEM('overriding color',(#508424),#88386, + #506656); +#508424 = PRESENTATION_STYLE_ASSIGNMENT((#508425)); +#508425 = SURFACE_STYLE_USAGE(.BOTH.,#508426); +#508426 = SURFACE_SIDE_STYLE('',(#508427)); +#508427 = SURFACE_STYLE_FILL_AREA(#508428); +#508428 = FILL_AREA_STYLE('',(#508429)); +#508429 = FILL_AREA_STYLE_COLOUR('',#506700); +#508430 = OVER_RIDING_STYLED_ITEM('overriding color',(#508431),#88404, + #506656); +#508431 = PRESENTATION_STYLE_ASSIGNMENT((#508432)); +#508432 = SURFACE_STYLE_USAGE(.BOTH.,#508433); +#508433 = SURFACE_SIDE_STYLE('',(#508434)); +#508434 = SURFACE_STYLE_FILL_AREA(#508435); +#508435 = FILL_AREA_STYLE('',(#508436)); +#508436 = FILL_AREA_STYLE_COLOUR('',#506700); +#508437 = OVER_RIDING_STYLED_ITEM('overriding color',(#508438),#88422, + #506656); +#508438 = PRESENTATION_STYLE_ASSIGNMENT((#508439)); +#508439 = SURFACE_STYLE_USAGE(.BOTH.,#508440); +#508440 = SURFACE_SIDE_STYLE('',(#508441)); +#508441 = SURFACE_STYLE_FILL_AREA(#508442); +#508442 = FILL_AREA_STYLE('',(#508443)); +#508443 = FILL_AREA_STYLE_COLOUR('',#506700); +#508444 = OVER_RIDING_STYLED_ITEM('overriding color',(#508445),#88440, + #506656); +#508445 = PRESENTATION_STYLE_ASSIGNMENT((#508446)); +#508446 = SURFACE_STYLE_USAGE(.BOTH.,#508447); +#508447 = SURFACE_SIDE_STYLE('',(#508448)); +#508448 = SURFACE_STYLE_FILL_AREA(#508449); +#508449 = FILL_AREA_STYLE('',(#508450)); +#508450 = FILL_AREA_STYLE_COLOUR('',#506700); +#508451 = OVER_RIDING_STYLED_ITEM('overriding color',(#508452),#88458, + #506656); +#508452 = PRESENTATION_STYLE_ASSIGNMENT((#508453)); +#508453 = SURFACE_STYLE_USAGE(.BOTH.,#508454); +#508454 = SURFACE_SIDE_STYLE('',(#508455)); +#508455 = SURFACE_STYLE_FILL_AREA(#508456); +#508456 = FILL_AREA_STYLE('',(#508457)); +#508457 = FILL_AREA_STYLE_COLOUR('',#506700); +#508458 = OVER_RIDING_STYLED_ITEM('overriding color',(#508459),#88476, + #506656); +#508459 = PRESENTATION_STYLE_ASSIGNMENT((#508460)); +#508460 = SURFACE_STYLE_USAGE(.BOTH.,#508461); +#508461 = SURFACE_SIDE_STYLE('',(#508462)); +#508462 = SURFACE_STYLE_FILL_AREA(#508463); +#508463 = FILL_AREA_STYLE('',(#508464)); +#508464 = FILL_AREA_STYLE_COLOUR('',#506700); +#508465 = OVER_RIDING_STYLED_ITEM('overriding color',(#508466),#88494, + #506656); +#508466 = PRESENTATION_STYLE_ASSIGNMENT((#508467)); +#508467 = SURFACE_STYLE_USAGE(.BOTH.,#508468); +#508468 = SURFACE_SIDE_STYLE('',(#508469)); +#508469 = SURFACE_STYLE_FILL_AREA(#508470); +#508470 = FILL_AREA_STYLE('',(#508471)); +#508471 = FILL_AREA_STYLE_COLOUR('',#506700); +#508472 = OVER_RIDING_STYLED_ITEM('overriding color',(#508473),#88506, + #506656); +#508473 = PRESENTATION_STYLE_ASSIGNMENT((#508474)); +#508474 = SURFACE_STYLE_USAGE(.BOTH.,#508475); +#508475 = SURFACE_SIDE_STYLE('',(#508476)); +#508476 = SURFACE_STYLE_FILL_AREA(#508477); +#508477 = FILL_AREA_STYLE('',(#508478)); +#508478 = FILL_AREA_STYLE_COLOUR('',#506700); +#508479 = OVER_RIDING_STYLED_ITEM('overriding color',(#508480),#88530, + #506656); +#508480 = PRESENTATION_STYLE_ASSIGNMENT((#508481)); +#508481 = SURFACE_STYLE_USAGE(.BOTH.,#508482); +#508482 = SURFACE_SIDE_STYLE('',(#508483)); +#508483 = SURFACE_STYLE_FILL_AREA(#508484); +#508484 = FILL_AREA_STYLE('',(#508485)); +#508485 = FILL_AREA_STYLE_COLOUR('',#506700); +#508486 = OVER_RIDING_STYLED_ITEM('overriding color',(#508487),#88548, + #506656); +#508487 = PRESENTATION_STYLE_ASSIGNMENT((#508488)); +#508488 = SURFACE_STYLE_USAGE(.BOTH.,#508489); +#508489 = SURFACE_SIDE_STYLE('',(#508490)); +#508490 = SURFACE_STYLE_FILL_AREA(#508491); +#508491 = FILL_AREA_STYLE('',(#508492)); +#508492 = FILL_AREA_STYLE_COLOUR('',#506700); +#508493 = OVER_RIDING_STYLED_ITEM('overriding color',(#508494),#88566, + #506656); +#508494 = PRESENTATION_STYLE_ASSIGNMENT((#508495)); +#508495 = SURFACE_STYLE_USAGE(.BOTH.,#508496); +#508496 = SURFACE_SIDE_STYLE('',(#508497)); +#508497 = SURFACE_STYLE_FILL_AREA(#508498); +#508498 = FILL_AREA_STYLE('',(#508499)); +#508499 = FILL_AREA_STYLE_COLOUR('',#506700); +#508500 = OVER_RIDING_STYLED_ITEM('overriding color',(#508501),#88584, + #506656); +#508501 = PRESENTATION_STYLE_ASSIGNMENT((#508502)); +#508502 = SURFACE_STYLE_USAGE(.BOTH.,#508503); +#508503 = SURFACE_SIDE_STYLE('',(#508504)); +#508504 = SURFACE_STYLE_FILL_AREA(#508505); +#508505 = FILL_AREA_STYLE('',(#508506)); +#508506 = FILL_AREA_STYLE_COLOUR('',#506700); +#508507 = OVER_RIDING_STYLED_ITEM('overriding color',(#508508),#88602, + #506656); +#508508 = PRESENTATION_STYLE_ASSIGNMENT((#508509)); +#508509 = SURFACE_STYLE_USAGE(.BOTH.,#508510); +#508510 = SURFACE_SIDE_STYLE('',(#508511)); +#508511 = SURFACE_STYLE_FILL_AREA(#508512); +#508512 = FILL_AREA_STYLE('',(#508513)); +#508513 = FILL_AREA_STYLE_COLOUR('',#506700); +#508514 = OVER_RIDING_STYLED_ITEM('overriding color',(#508515),#88620, + #506656); +#508515 = PRESENTATION_STYLE_ASSIGNMENT((#508516)); +#508516 = SURFACE_STYLE_USAGE(.BOTH.,#508517); +#508517 = SURFACE_SIDE_STYLE('',(#508518)); +#508518 = SURFACE_STYLE_FILL_AREA(#508519); +#508519 = FILL_AREA_STYLE('',(#508520)); +#508520 = FILL_AREA_STYLE_COLOUR('',#506700); +#508521 = OVER_RIDING_STYLED_ITEM('overriding color',(#508522),#88638, + #506656); +#508522 = PRESENTATION_STYLE_ASSIGNMENT((#508523)); +#508523 = SURFACE_STYLE_USAGE(.BOTH.,#508524); +#508524 = SURFACE_SIDE_STYLE('',(#508525)); +#508525 = SURFACE_STYLE_FILL_AREA(#508526); +#508526 = FILL_AREA_STYLE('',(#508527)); +#508527 = FILL_AREA_STYLE_COLOUR('',#506700); +#508528 = OVER_RIDING_STYLED_ITEM('overriding color',(#508529),#88664, + #506656); +#508529 = PRESENTATION_STYLE_ASSIGNMENT((#508530)); +#508530 = SURFACE_STYLE_USAGE(.BOTH.,#508531); +#508531 = SURFACE_SIDE_STYLE('',(#508532)); +#508532 = SURFACE_STYLE_FILL_AREA(#508533); +#508533 = FILL_AREA_STYLE('',(#508534)); +#508534 = FILL_AREA_STYLE_COLOUR('',#506700); +#508535 = OVER_RIDING_STYLED_ITEM('overriding color',(#508536),#88689, + #506656); +#508536 = PRESENTATION_STYLE_ASSIGNMENT((#508537)); +#508537 = SURFACE_STYLE_USAGE(.BOTH.,#508538); +#508538 = SURFACE_SIDE_STYLE('',(#508539)); +#508539 = SURFACE_STYLE_FILL_AREA(#508540); +#508540 = FILL_AREA_STYLE('',(#508541)); +#508541 = FILL_AREA_STYLE_COLOUR('',#506700); +#508542 = OVER_RIDING_STYLED_ITEM('overriding color',(#508543),#88716, + #506656); +#508543 = PRESENTATION_STYLE_ASSIGNMENT((#508544)); +#508544 = SURFACE_STYLE_USAGE(.BOTH.,#508545); +#508545 = SURFACE_SIDE_STYLE('',(#508546)); +#508546 = SURFACE_STYLE_FILL_AREA(#508547); +#508547 = FILL_AREA_STYLE('',(#508548)); +#508548 = FILL_AREA_STYLE_COLOUR('',#506700); +#508549 = OVER_RIDING_STYLED_ITEM('overriding color',(#508550),#88734, + #506656); +#508550 = PRESENTATION_STYLE_ASSIGNMENT((#508551)); +#508551 = SURFACE_STYLE_USAGE(.BOTH.,#508552); +#508552 = SURFACE_SIDE_STYLE('',(#508553)); +#508553 = SURFACE_STYLE_FILL_AREA(#508554); +#508554 = FILL_AREA_STYLE('',(#508555)); +#508555 = FILL_AREA_STYLE_COLOUR('',#506700); +#508556 = OVER_RIDING_STYLED_ITEM('overriding color',(#508557),#88760, + #506656); +#508557 = PRESENTATION_STYLE_ASSIGNMENT((#508558)); +#508558 = SURFACE_STYLE_USAGE(.BOTH.,#508559); +#508559 = SURFACE_SIDE_STYLE('',(#508560)); +#508560 = SURFACE_STYLE_FILL_AREA(#508561); +#508561 = FILL_AREA_STYLE('',(#508562)); +#508562 = FILL_AREA_STYLE_COLOUR('',#506700); +#508563 = OVER_RIDING_STYLED_ITEM('overriding color',(#508564),#88778, + #506656); +#508564 = PRESENTATION_STYLE_ASSIGNMENT((#508565)); +#508565 = SURFACE_STYLE_USAGE(.BOTH.,#508566); +#508566 = SURFACE_SIDE_STYLE('',(#508567)); +#508567 = SURFACE_STYLE_FILL_AREA(#508568); +#508568 = FILL_AREA_STYLE('',(#508569)); +#508569 = FILL_AREA_STYLE_COLOUR('',#506700); +#508570 = OVER_RIDING_STYLED_ITEM('overriding color',(#508571),#88803, + #506656); +#508571 = PRESENTATION_STYLE_ASSIGNMENT((#508572)); +#508572 = SURFACE_STYLE_USAGE(.BOTH.,#508573); +#508573 = SURFACE_SIDE_STYLE('',(#508574)); +#508574 = SURFACE_STYLE_FILL_AREA(#508575); +#508575 = FILL_AREA_STYLE('',(#508576)); +#508576 = FILL_AREA_STYLE_COLOUR('',#506700); +#508577 = OVER_RIDING_STYLED_ITEM('overriding color',(#508578),#88822, + #506656); +#508578 = PRESENTATION_STYLE_ASSIGNMENT((#508579)); +#508579 = SURFACE_STYLE_USAGE(.BOTH.,#508580); +#508580 = SURFACE_SIDE_STYLE('',(#508581)); +#508581 = SURFACE_STYLE_FILL_AREA(#508582); +#508582 = FILL_AREA_STYLE('',(#508583)); +#508583 = FILL_AREA_STYLE_COLOUR('',#506700); +#508584 = OVER_RIDING_STYLED_ITEM('overriding color',(#508585),#88848, + #506656); +#508585 = PRESENTATION_STYLE_ASSIGNMENT((#508586)); +#508586 = SURFACE_STYLE_USAGE(.BOTH.,#508587); +#508587 = SURFACE_SIDE_STYLE('',(#508588)); +#508588 = SURFACE_STYLE_FILL_AREA(#508589); +#508589 = FILL_AREA_STYLE('',(#508590)); +#508590 = FILL_AREA_STYLE_COLOUR('',#506700); +#508591 = OVER_RIDING_STYLED_ITEM('overriding color',(#508592),#88866, + #506656); +#508592 = PRESENTATION_STYLE_ASSIGNMENT((#508593)); +#508593 = SURFACE_STYLE_USAGE(.BOTH.,#508594); +#508594 = SURFACE_SIDE_STYLE('',(#508595)); +#508595 = SURFACE_STYLE_FILL_AREA(#508596); +#508596 = FILL_AREA_STYLE('',(#508597)); +#508597 = FILL_AREA_STYLE_COLOUR('',#506700); +#508598 = OVER_RIDING_STYLED_ITEM('overriding color',(#508599),#88891, + #506656); +#508599 = PRESENTATION_STYLE_ASSIGNMENT((#508600)); +#508600 = SURFACE_STYLE_USAGE(.BOTH.,#508601); +#508601 = SURFACE_SIDE_STYLE('',(#508602)); +#508602 = SURFACE_STYLE_FILL_AREA(#508603); +#508603 = FILL_AREA_STYLE('',(#508604)); +#508604 = FILL_AREA_STYLE_COLOUR('',#506700); +#508605 = OVER_RIDING_STYLED_ITEM('overriding color',(#508606),#88910, + #506656); +#508606 = PRESENTATION_STYLE_ASSIGNMENT((#508607)); +#508607 = SURFACE_STYLE_USAGE(.BOTH.,#508608); +#508608 = SURFACE_SIDE_STYLE('',(#508609)); +#508609 = SURFACE_STYLE_FILL_AREA(#508610); +#508610 = FILL_AREA_STYLE('',(#508611)); +#508611 = FILL_AREA_STYLE_COLOUR('',#506700); +#508612 = OVER_RIDING_STYLED_ITEM('overriding color',(#508613),#88936, + #506656); +#508613 = PRESENTATION_STYLE_ASSIGNMENT((#508614)); +#508614 = SURFACE_STYLE_USAGE(.BOTH.,#508615); +#508615 = SURFACE_SIDE_STYLE('',(#508616)); +#508616 = SURFACE_STYLE_FILL_AREA(#508617); +#508617 = FILL_AREA_STYLE('',(#508618)); +#508618 = FILL_AREA_STYLE_COLOUR('',#506700); +#508619 = OVER_RIDING_STYLED_ITEM('overriding color',(#508620),#88954, + #506656); +#508620 = PRESENTATION_STYLE_ASSIGNMENT((#508621)); +#508621 = SURFACE_STYLE_USAGE(.BOTH.,#508622); +#508622 = SURFACE_SIDE_STYLE('',(#508623)); +#508623 = SURFACE_STYLE_FILL_AREA(#508624); +#508624 = FILL_AREA_STYLE('',(#508625)); +#508625 = FILL_AREA_STYLE_COLOUR('',#506700); +#508626 = OVER_RIDING_STYLED_ITEM('overriding color',(#508627),#88979, + #506656); +#508627 = PRESENTATION_STYLE_ASSIGNMENT((#508628)); +#508628 = SURFACE_STYLE_USAGE(.BOTH.,#508629); +#508629 = SURFACE_SIDE_STYLE('',(#508630)); +#508630 = SURFACE_STYLE_FILL_AREA(#508631); +#508631 = FILL_AREA_STYLE('',(#508632)); +#508632 = FILL_AREA_STYLE_COLOUR('',#506700); +#508633 = OVER_RIDING_STYLED_ITEM('overriding color',(#508634),#88997, + #506656); +#508634 = PRESENTATION_STYLE_ASSIGNMENT((#508635)); +#508635 = SURFACE_STYLE_USAGE(.BOTH.,#508636); +#508636 = SURFACE_SIDE_STYLE('',(#508637)); +#508637 = SURFACE_STYLE_FILL_AREA(#508638); +#508638 = FILL_AREA_STYLE('',(#508639)); +#508639 = FILL_AREA_STYLE_COLOUR('',#506700); +#508640 = OVER_RIDING_STYLED_ITEM('overriding color',(#508641),#89023, + #506656); +#508641 = PRESENTATION_STYLE_ASSIGNMENT((#508642)); +#508642 = SURFACE_STYLE_USAGE(.BOTH.,#508643); +#508643 = SURFACE_SIDE_STYLE('',(#508644)); +#508644 = SURFACE_STYLE_FILL_AREA(#508645); +#508645 = FILL_AREA_STYLE('',(#508646)); +#508646 = FILL_AREA_STYLE_COLOUR('',#506700); +#508647 = OVER_RIDING_STYLED_ITEM('overriding color',(#508648),#89049, + #506656); +#508648 = PRESENTATION_STYLE_ASSIGNMENT((#508649)); +#508649 = SURFACE_STYLE_USAGE(.BOTH.,#508650); +#508650 = SURFACE_SIDE_STYLE('',(#508651)); +#508651 = SURFACE_STYLE_FILL_AREA(#508652); +#508652 = FILL_AREA_STYLE('',(#508653)); +#508653 = FILL_AREA_STYLE_COLOUR('',#506700); +#508654 = OVER_RIDING_STYLED_ITEM('overriding color',(#508655),#89073, + #506656); +#508655 = PRESENTATION_STYLE_ASSIGNMENT((#508656)); +#508656 = SURFACE_STYLE_USAGE(.BOTH.,#508657); +#508657 = SURFACE_SIDE_STYLE('',(#508658)); +#508658 = SURFACE_STYLE_FILL_AREA(#508659); +#508659 = FILL_AREA_STYLE('',(#508660)); +#508660 = FILL_AREA_STYLE_COLOUR('',#506700); +#508661 = OVER_RIDING_STYLED_ITEM('overriding color',(#508662),#89100, + #506656); +#508662 = PRESENTATION_STYLE_ASSIGNMENT((#508663)); +#508663 = SURFACE_STYLE_USAGE(.BOTH.,#508664); +#508664 = SURFACE_SIDE_STYLE('',(#508665)); +#508665 = SURFACE_STYLE_FILL_AREA(#508666); +#508666 = FILL_AREA_STYLE('',(#508667)); +#508667 = FILL_AREA_STYLE_COLOUR('',#506700); +#508668 = OVER_RIDING_STYLED_ITEM('overriding color',(#508669),#89118, + #506656); +#508669 = PRESENTATION_STYLE_ASSIGNMENT((#508670)); +#508670 = SURFACE_STYLE_USAGE(.BOTH.,#508671); +#508671 = SURFACE_SIDE_STYLE('',(#508672)); +#508672 = SURFACE_STYLE_FILL_AREA(#508673); +#508673 = FILL_AREA_STYLE('',(#508674)); +#508674 = FILL_AREA_STYLE_COLOUR('',#506700); +#508675 = OVER_RIDING_STYLED_ITEM('overriding color',(#508676),#89144, + #506656); +#508676 = PRESENTATION_STYLE_ASSIGNMENT((#508677)); +#508677 = SURFACE_STYLE_USAGE(.BOTH.,#508678); +#508678 = SURFACE_SIDE_STYLE('',(#508679)); +#508679 = SURFACE_STYLE_FILL_AREA(#508680); +#508680 = FILL_AREA_STYLE('',(#508681)); +#508681 = FILL_AREA_STYLE_COLOUR('',#506700); +#508682 = OVER_RIDING_STYLED_ITEM('overriding color',(#508683),#89162, + #506656); +#508683 = PRESENTATION_STYLE_ASSIGNMENT((#508684)); +#508684 = SURFACE_STYLE_USAGE(.BOTH.,#508685); +#508685 = SURFACE_SIDE_STYLE('',(#508686)); +#508686 = SURFACE_STYLE_FILL_AREA(#508687); +#508687 = FILL_AREA_STYLE('',(#508688)); +#508688 = FILL_AREA_STYLE_COLOUR('',#506700); +#508689 = OVER_RIDING_STYLED_ITEM('overriding color',(#508690),#89187, + #506656); +#508690 = PRESENTATION_STYLE_ASSIGNMENT((#508691)); +#508691 = SURFACE_STYLE_USAGE(.BOTH.,#508692); +#508692 = SURFACE_SIDE_STYLE('',(#508693)); +#508693 = SURFACE_STYLE_FILL_AREA(#508694); +#508694 = FILL_AREA_STYLE('',(#508695)); +#508695 = FILL_AREA_STYLE_COLOUR('',#506700); +#508696 = OVER_RIDING_STYLED_ITEM('overriding color',(#508697),#89205, + #506656); +#508697 = PRESENTATION_STYLE_ASSIGNMENT((#508698)); +#508698 = SURFACE_STYLE_USAGE(.BOTH.,#508699); +#508699 = SURFACE_SIDE_STYLE('',(#508700)); +#508700 = SURFACE_STYLE_FILL_AREA(#508701); +#508701 = FILL_AREA_STYLE('',(#508702)); +#508702 = FILL_AREA_STYLE_COLOUR('',#506700); +#508703 = OVER_RIDING_STYLED_ITEM('overriding color',(#508704),#89231, + #506656); +#508704 = PRESENTATION_STYLE_ASSIGNMENT((#508705)); +#508705 = SURFACE_STYLE_USAGE(.BOTH.,#508706); +#508706 = SURFACE_SIDE_STYLE('',(#508707)); +#508707 = SURFACE_STYLE_FILL_AREA(#508708); +#508708 = FILL_AREA_STYLE('',(#508709)); +#508709 = FILL_AREA_STYLE_COLOUR('',#506700); +#508710 = OVER_RIDING_STYLED_ITEM('overriding color',(#508711),#89257, + #506656); +#508711 = PRESENTATION_STYLE_ASSIGNMENT((#508712)); +#508712 = SURFACE_STYLE_USAGE(.BOTH.,#508713); +#508713 = SURFACE_SIDE_STYLE('',(#508714)); +#508714 = SURFACE_STYLE_FILL_AREA(#508715); +#508715 = FILL_AREA_STYLE('',(#508716)); +#508716 = FILL_AREA_STYLE_COLOUR('',#506700); +#508717 = OVER_RIDING_STYLED_ITEM('overriding color',(#508718),#89282, + #506656); +#508718 = PRESENTATION_STYLE_ASSIGNMENT((#508719)); +#508719 = SURFACE_STYLE_USAGE(.BOTH.,#508720); +#508720 = SURFACE_SIDE_STYLE('',(#508721)); +#508721 = SURFACE_STYLE_FILL_AREA(#508722); +#508722 = FILL_AREA_STYLE('',(#508723)); +#508723 = FILL_AREA_STYLE_COLOUR('',#506700); +#508724 = OVER_RIDING_STYLED_ITEM('overriding color',(#508725),#89308, + #506656); +#508725 = PRESENTATION_STYLE_ASSIGNMENT((#508726)); +#508726 = SURFACE_STYLE_USAGE(.BOTH.,#508727); +#508727 = SURFACE_SIDE_STYLE('',(#508728)); +#508728 = SURFACE_STYLE_FILL_AREA(#508729); +#508729 = FILL_AREA_STYLE('',(#508730)); +#508730 = FILL_AREA_STYLE_COLOUR('',#506700); +#508731 = OVER_RIDING_STYLED_ITEM('overriding color',(#508732),#89334, + #506656); +#508732 = PRESENTATION_STYLE_ASSIGNMENT((#508733)); +#508733 = SURFACE_STYLE_USAGE(.BOTH.,#508734); +#508734 = SURFACE_SIDE_STYLE('',(#508735)); +#508735 = SURFACE_STYLE_FILL_AREA(#508736); +#508736 = FILL_AREA_STYLE('',(#508737)); +#508737 = FILL_AREA_STYLE_COLOUR('',#506700); +#508738 = OVER_RIDING_STYLED_ITEM('overriding color',(#508739),#89359, + #506656); +#508739 = PRESENTATION_STYLE_ASSIGNMENT((#508740)); +#508740 = SURFACE_STYLE_USAGE(.BOTH.,#508741); +#508741 = SURFACE_SIDE_STYLE('',(#508742)); +#508742 = SURFACE_STYLE_FILL_AREA(#508743); +#508743 = FILL_AREA_STYLE('',(#508744)); +#508744 = FILL_AREA_STYLE_COLOUR('',#506700); +#508745 = OVER_RIDING_STYLED_ITEM('overriding color',(#508746),#89384, + #506656); +#508746 = PRESENTATION_STYLE_ASSIGNMENT((#508747)); +#508747 = SURFACE_STYLE_USAGE(.BOTH.,#508748); +#508748 = SURFACE_SIDE_STYLE('',(#508749)); +#508749 = SURFACE_STYLE_FILL_AREA(#508750); +#508750 = FILL_AREA_STYLE('',(#508751)); +#508751 = FILL_AREA_STYLE_COLOUR('',#506700); +#508752 = OVER_RIDING_STYLED_ITEM('overriding color',(#508753),#89410, + #506656); +#508753 = PRESENTATION_STYLE_ASSIGNMENT((#508754)); +#508754 = SURFACE_STYLE_USAGE(.BOTH.,#508755); +#508755 = SURFACE_SIDE_STYLE('',(#508756)); +#508756 = SURFACE_STYLE_FILL_AREA(#508757); +#508757 = FILL_AREA_STYLE('',(#508758)); +#508758 = FILL_AREA_STYLE_COLOUR('',#506700); +#508759 = OVER_RIDING_STYLED_ITEM('overriding color',(#508760),#89436, + #506656); +#508760 = PRESENTATION_STYLE_ASSIGNMENT((#508761)); +#508761 = SURFACE_STYLE_USAGE(.BOTH.,#508762); +#508762 = SURFACE_SIDE_STYLE('',(#508763)); +#508763 = SURFACE_STYLE_FILL_AREA(#508764); +#508764 = FILL_AREA_STYLE('',(#508765)); +#508765 = FILL_AREA_STYLE_COLOUR('',#506700); +#508766 = OVER_RIDING_STYLED_ITEM('overriding color',(#508767),#89461, + #506656); +#508767 = PRESENTATION_STYLE_ASSIGNMENT((#508768)); +#508768 = SURFACE_STYLE_USAGE(.BOTH.,#508769); +#508769 = SURFACE_SIDE_STYLE('',(#508770)); +#508770 = SURFACE_STYLE_FILL_AREA(#508771); +#508771 = FILL_AREA_STYLE('',(#508772)); +#508772 = FILL_AREA_STYLE_COLOUR('',#506700); +#508773 = OVER_RIDING_STYLED_ITEM('overriding color',(#508774),#89485, + #506656); +#508774 = PRESENTATION_STYLE_ASSIGNMENT((#508775)); +#508775 = SURFACE_STYLE_USAGE(.BOTH.,#508776); +#508776 = SURFACE_SIDE_STYLE('',(#508777)); +#508777 = SURFACE_STYLE_FILL_AREA(#508778); +#508778 = FILL_AREA_STYLE('',(#508779)); +#508779 = FILL_AREA_STYLE_COLOUR('',#506700); +#508780 = OVER_RIDING_STYLED_ITEM('overriding color',(#508781),#89511, + #506656); +#508781 = PRESENTATION_STYLE_ASSIGNMENT((#508782)); +#508782 = SURFACE_STYLE_USAGE(.BOTH.,#508783); +#508783 = SURFACE_SIDE_STYLE('',(#508784)); +#508784 = SURFACE_STYLE_FILL_AREA(#508785); +#508785 = FILL_AREA_STYLE('',(#508786)); +#508786 = FILL_AREA_STYLE_COLOUR('',#506700); +#508787 = OVER_RIDING_STYLED_ITEM('overriding color',(#508788),#89529, + #506656); +#508788 = PRESENTATION_STYLE_ASSIGNMENT((#508789)); +#508789 = SURFACE_STYLE_USAGE(.BOTH.,#508790); +#508790 = SURFACE_SIDE_STYLE('',(#508791)); +#508791 = SURFACE_STYLE_FILL_AREA(#508792); +#508792 = FILL_AREA_STYLE('',(#508793)); +#508793 = FILL_AREA_STYLE_COLOUR('',#506700); +#508794 = OVER_RIDING_STYLED_ITEM('overriding color',(#508795),#89554, + #506656); +#508795 = PRESENTATION_STYLE_ASSIGNMENT((#508796)); +#508796 = SURFACE_STYLE_USAGE(.BOTH.,#508797); +#508797 = SURFACE_SIDE_STYLE('',(#508798)); +#508798 = SURFACE_STYLE_FILL_AREA(#508799); +#508799 = FILL_AREA_STYLE('',(#508800)); +#508800 = FILL_AREA_STYLE_COLOUR('',#506700); +#508801 = OVER_RIDING_STYLED_ITEM('overriding color',(#508802),#89572, + #506656); +#508802 = PRESENTATION_STYLE_ASSIGNMENT((#508803)); +#508803 = SURFACE_STYLE_USAGE(.BOTH.,#508804); +#508804 = SURFACE_SIDE_STYLE('',(#508805)); +#508805 = SURFACE_STYLE_FILL_AREA(#508806); +#508806 = FILL_AREA_STYLE('',(#508807)); +#508807 = FILL_AREA_STYLE_COLOUR('',#506700); +#508808 = OVER_RIDING_STYLED_ITEM('overriding color',(#508809),#89598, + #506656); +#508809 = PRESENTATION_STYLE_ASSIGNMENT((#508810)); +#508810 = SURFACE_STYLE_USAGE(.BOTH.,#508811); +#508811 = SURFACE_SIDE_STYLE('',(#508812)); +#508812 = SURFACE_STYLE_FILL_AREA(#508813); +#508813 = FILL_AREA_STYLE('',(#508814)); +#508814 = FILL_AREA_STYLE_COLOUR('',#506700); +#508815 = OVER_RIDING_STYLED_ITEM('overriding color',(#508816),#89616, + #506656); +#508816 = PRESENTATION_STYLE_ASSIGNMENT((#508817)); +#508817 = SURFACE_STYLE_USAGE(.BOTH.,#508818); +#508818 = SURFACE_SIDE_STYLE('',(#508819)); +#508819 = SURFACE_STYLE_FILL_AREA(#508820); +#508820 = FILL_AREA_STYLE('',(#508821)); +#508821 = FILL_AREA_STYLE_COLOUR('',#506700); +#508822 = OVER_RIDING_STYLED_ITEM('overriding color',(#508823),#89641, + #506656); +#508823 = PRESENTATION_STYLE_ASSIGNMENT((#508824)); +#508824 = SURFACE_STYLE_USAGE(.BOTH.,#508825); +#508825 = SURFACE_SIDE_STYLE('',(#508826)); +#508826 = SURFACE_STYLE_FILL_AREA(#508827); +#508827 = FILL_AREA_STYLE('',(#508828)); +#508828 = FILL_AREA_STYLE_COLOUR('',#506700); +#508829 = OVER_RIDING_STYLED_ITEM('overriding color',(#508830),#89667, + #506656); +#508830 = PRESENTATION_STYLE_ASSIGNMENT((#508831)); +#508831 = SURFACE_STYLE_USAGE(.BOTH.,#508832); +#508832 = SURFACE_SIDE_STYLE('',(#508833)); +#508833 = SURFACE_STYLE_FILL_AREA(#508834); +#508834 = FILL_AREA_STYLE('',(#508835)); +#508835 = FILL_AREA_STYLE_COLOUR('',#506700); +#508836 = OVER_RIDING_STYLED_ITEM('overriding color',(#508837),#89693, + #506656); +#508837 = PRESENTATION_STYLE_ASSIGNMENT((#508838)); +#508838 = SURFACE_STYLE_USAGE(.BOTH.,#508839); +#508839 = SURFACE_SIDE_STYLE('',(#508840)); +#508840 = SURFACE_STYLE_FILL_AREA(#508841); +#508841 = FILL_AREA_STYLE('',(#508842)); +#508842 = FILL_AREA_STYLE_COLOUR('',#506700); +#508843 = OVER_RIDING_STYLED_ITEM('overriding color',(#508844),#89719, + #506656); +#508844 = PRESENTATION_STYLE_ASSIGNMENT((#508845)); +#508845 = SURFACE_STYLE_USAGE(.BOTH.,#508846); +#508846 = SURFACE_SIDE_STYLE('',(#508847)); +#508847 = SURFACE_STYLE_FILL_AREA(#508848); +#508848 = FILL_AREA_STYLE('',(#508849)); +#508849 = FILL_AREA_STYLE_COLOUR('',#506700); +#508850 = OVER_RIDING_STYLED_ITEM('overriding color',(#508851),#89736, + #506656); +#508851 = PRESENTATION_STYLE_ASSIGNMENT((#508852)); +#508852 = SURFACE_STYLE_USAGE(.BOTH.,#508853); +#508853 = SURFACE_SIDE_STYLE('',(#508854)); +#508854 = SURFACE_STYLE_FILL_AREA(#508855); +#508855 = FILL_AREA_STYLE('',(#508856)); +#508856 = FILL_AREA_STYLE_COLOUR('',#506700); +#508857 = OVER_RIDING_STYLED_ITEM('overriding color',(#508858),#89760, + #506656); +#508858 = PRESENTATION_STYLE_ASSIGNMENT((#508859)); +#508859 = SURFACE_STYLE_USAGE(.BOTH.,#508860); +#508860 = SURFACE_SIDE_STYLE('',(#508861)); +#508861 = SURFACE_STYLE_FILL_AREA(#508862); +#508862 = FILL_AREA_STYLE('',(#508863)); +#508863 = FILL_AREA_STYLE_COLOUR('',#506700); +#508864 = OVER_RIDING_STYLED_ITEM('overriding color',(#508865),#89778, + #506656); +#508865 = PRESENTATION_STYLE_ASSIGNMENT((#508866)); +#508866 = SURFACE_STYLE_USAGE(.BOTH.,#508867); +#508867 = SURFACE_SIDE_STYLE('',(#508868)); +#508868 = SURFACE_STYLE_FILL_AREA(#508869); +#508869 = FILL_AREA_STYLE('',(#508870)); +#508870 = FILL_AREA_STYLE_COLOUR('',#506700); +#508871 = OVER_RIDING_STYLED_ITEM('overriding color',(#508872),#89796, + #506656); +#508872 = PRESENTATION_STYLE_ASSIGNMENT((#508873)); +#508873 = SURFACE_STYLE_USAGE(.BOTH.,#508874); +#508874 = SURFACE_SIDE_STYLE('',(#508875)); +#508875 = SURFACE_STYLE_FILL_AREA(#508876); +#508876 = FILL_AREA_STYLE('',(#508877)); +#508877 = FILL_AREA_STYLE_COLOUR('',#506700); +#508878 = OVER_RIDING_STYLED_ITEM('overriding color',(#508879),#89814, + #506656); +#508879 = PRESENTATION_STYLE_ASSIGNMENT((#508880)); +#508880 = SURFACE_STYLE_USAGE(.BOTH.,#508881); +#508881 = SURFACE_SIDE_STYLE('',(#508882)); +#508882 = SURFACE_STYLE_FILL_AREA(#508883); +#508883 = FILL_AREA_STYLE('',(#508884)); +#508884 = FILL_AREA_STYLE_COLOUR('',#506700); +#508885 = OVER_RIDING_STYLED_ITEM('overriding color',(#508886),#89832, + #506656); +#508886 = PRESENTATION_STYLE_ASSIGNMENT((#508887)); +#508887 = SURFACE_STYLE_USAGE(.BOTH.,#508888); +#508888 = SURFACE_SIDE_STYLE('',(#508889)); +#508889 = SURFACE_STYLE_FILL_AREA(#508890); +#508890 = FILL_AREA_STYLE('',(#508891)); +#508891 = FILL_AREA_STYLE_COLOUR('',#506700); +#508892 = OVER_RIDING_STYLED_ITEM('overriding color',(#508893),#89850, + #506656); +#508893 = PRESENTATION_STYLE_ASSIGNMENT((#508894)); +#508894 = SURFACE_STYLE_USAGE(.BOTH.,#508895); +#508895 = SURFACE_SIDE_STYLE('',(#508896)); +#508896 = SURFACE_STYLE_FILL_AREA(#508897); +#508897 = FILL_AREA_STYLE('',(#508898)); +#508898 = FILL_AREA_STYLE_COLOUR('',#506700); +#508899 = OVER_RIDING_STYLED_ITEM('overriding color',(#508900),#89868, + #506656); +#508900 = PRESENTATION_STYLE_ASSIGNMENT((#508901)); +#508901 = SURFACE_STYLE_USAGE(.BOTH.,#508902); +#508902 = SURFACE_SIDE_STYLE('',(#508903)); +#508903 = SURFACE_STYLE_FILL_AREA(#508904); +#508904 = FILL_AREA_STYLE('',(#508905)); +#508905 = FILL_AREA_STYLE_COLOUR('',#506700); +#508906 = OVER_RIDING_STYLED_ITEM('overriding color',(#508907),#89880, + #506656); +#508907 = PRESENTATION_STYLE_ASSIGNMENT((#508908)); +#508908 = SURFACE_STYLE_USAGE(.BOTH.,#508909); +#508909 = SURFACE_SIDE_STYLE('',(#508910)); +#508910 = SURFACE_STYLE_FILL_AREA(#508911); +#508911 = FILL_AREA_STYLE('',(#508912)); +#508912 = FILL_AREA_STYLE_COLOUR('',#506700); +#508913 = OVER_RIDING_STYLED_ITEM('overriding color',(#508914),#89904, + #506656); +#508914 = PRESENTATION_STYLE_ASSIGNMENT((#508915)); +#508915 = SURFACE_STYLE_USAGE(.BOTH.,#508916); +#508916 = SURFACE_SIDE_STYLE('',(#508917)); +#508917 = SURFACE_STYLE_FILL_AREA(#508918); +#508918 = FILL_AREA_STYLE('',(#508919)); +#508919 = FILL_AREA_STYLE_COLOUR('',#506700); +#508920 = OVER_RIDING_STYLED_ITEM('overriding color',(#508921),#89922, + #506656); +#508921 = PRESENTATION_STYLE_ASSIGNMENT((#508922)); +#508922 = SURFACE_STYLE_USAGE(.BOTH.,#508923); +#508923 = SURFACE_SIDE_STYLE('',(#508924)); +#508924 = SURFACE_STYLE_FILL_AREA(#508925); +#508925 = FILL_AREA_STYLE('',(#508926)); +#508926 = FILL_AREA_STYLE_COLOUR('',#506700); +#508927 = OVER_RIDING_STYLED_ITEM('overriding color',(#508928),#89940, + #506656); +#508928 = PRESENTATION_STYLE_ASSIGNMENT((#508929)); +#508929 = SURFACE_STYLE_USAGE(.BOTH.,#508930); +#508930 = SURFACE_SIDE_STYLE('',(#508931)); +#508931 = SURFACE_STYLE_FILL_AREA(#508932); +#508932 = FILL_AREA_STYLE('',(#508933)); +#508933 = FILL_AREA_STYLE_COLOUR('',#506700); +#508934 = OVER_RIDING_STYLED_ITEM('overriding color',(#508935),#89958, + #506656); +#508935 = PRESENTATION_STYLE_ASSIGNMENT((#508936)); +#508936 = SURFACE_STYLE_USAGE(.BOTH.,#508937); +#508937 = SURFACE_SIDE_STYLE('',(#508938)); +#508938 = SURFACE_STYLE_FILL_AREA(#508939); +#508939 = FILL_AREA_STYLE('',(#508940)); +#508940 = FILL_AREA_STYLE_COLOUR('',#506700); +#508941 = OVER_RIDING_STYLED_ITEM('overriding color',(#508942),#89976, + #506656); +#508942 = PRESENTATION_STYLE_ASSIGNMENT((#508943)); +#508943 = SURFACE_STYLE_USAGE(.BOTH.,#508944); +#508944 = SURFACE_SIDE_STYLE('',(#508945)); +#508945 = SURFACE_STYLE_FILL_AREA(#508946); +#508946 = FILL_AREA_STYLE('',(#508947)); +#508947 = FILL_AREA_STYLE_COLOUR('',#506700); +#508948 = OVER_RIDING_STYLED_ITEM('overriding color',(#508949),#89994, + #506656); +#508949 = PRESENTATION_STYLE_ASSIGNMENT((#508950)); +#508950 = SURFACE_STYLE_USAGE(.BOTH.,#508951); +#508951 = SURFACE_SIDE_STYLE('',(#508952)); +#508952 = SURFACE_STYLE_FILL_AREA(#508953); +#508953 = FILL_AREA_STYLE('',(#508954)); +#508954 = FILL_AREA_STYLE_COLOUR('',#506700); +#508955 = OVER_RIDING_STYLED_ITEM('overriding color',(#508956),#90012, + #506656); +#508956 = PRESENTATION_STYLE_ASSIGNMENT((#508957)); +#508957 = SURFACE_STYLE_USAGE(.BOTH.,#508958); +#508958 = SURFACE_SIDE_STYLE('',(#508959)); +#508959 = SURFACE_STYLE_FILL_AREA(#508960); +#508960 = FILL_AREA_STYLE('',(#508961)); +#508961 = FILL_AREA_STYLE_COLOUR('',#506700); +#508962 = OVER_RIDING_STYLED_ITEM('overriding color',(#508963),#90024, + #506656); +#508963 = PRESENTATION_STYLE_ASSIGNMENT((#508964)); +#508964 = SURFACE_STYLE_USAGE(.BOTH.,#508965); +#508965 = SURFACE_SIDE_STYLE('',(#508966)); +#508966 = SURFACE_STYLE_FILL_AREA(#508967); +#508967 = FILL_AREA_STYLE('',(#508968)); +#508968 = FILL_AREA_STYLE_COLOUR('',#506671); +#508969 = OVER_RIDING_STYLED_ITEM('overriding color',(#508970),#90068, + #506656); +#508970 = PRESENTATION_STYLE_ASSIGNMENT((#508971)); +#508971 = SURFACE_STYLE_USAGE(.BOTH.,#508972); +#508972 = SURFACE_SIDE_STYLE('',(#508973)); +#508973 = SURFACE_STYLE_FILL_AREA(#508974); +#508974 = FILL_AREA_STYLE('',(#508975)); +#508975 = FILL_AREA_STYLE_COLOUR('',#506671); +#508976 = OVER_RIDING_STYLED_ITEM('overriding color',(#508977),#90112, + #506656); +#508977 = PRESENTATION_STYLE_ASSIGNMENT((#508978)); +#508978 = SURFACE_STYLE_USAGE(.BOTH.,#508979); +#508979 = SURFACE_SIDE_STYLE('',(#508980)); +#508980 = SURFACE_STYLE_FILL_AREA(#508981); +#508981 = FILL_AREA_STYLE('',(#508982)); +#508982 = FILL_AREA_STYLE_COLOUR('',#506671); +#508983 = OVER_RIDING_STYLED_ITEM('overriding color',(#508984),#90147, + #506656); +#508984 = PRESENTATION_STYLE_ASSIGNMENT((#508985)); +#508985 = SURFACE_STYLE_USAGE(.BOTH.,#508986); +#508986 = SURFACE_SIDE_STYLE('',(#508987)); +#508987 = SURFACE_STYLE_FILL_AREA(#508988); +#508988 = FILL_AREA_STYLE('',(#508989)); +#508989 = FILL_AREA_STYLE_COLOUR('',#506671); +#508990 = OVER_RIDING_STYLED_ITEM('overriding color',(#508991),#90172, + #506656); +#508991 = PRESENTATION_STYLE_ASSIGNMENT((#508992)); +#508992 = SURFACE_STYLE_USAGE(.BOTH.,#508993); +#508993 = SURFACE_SIDE_STYLE('',(#508994)); +#508994 = SURFACE_STYLE_FILL_AREA(#508995); +#508995 = FILL_AREA_STYLE('',(#508996)); +#508996 = FILL_AREA_STYLE_COLOUR('',#506671); +#508997 = OVER_RIDING_STYLED_ITEM('overriding color',(#508998),#90196, + #506656); +#508998 = PRESENTATION_STYLE_ASSIGNMENT((#508999)); +#508999 = SURFACE_STYLE_USAGE(.BOTH.,#509000); +#509000 = SURFACE_SIDE_STYLE('',(#509001)); +#509001 = SURFACE_STYLE_FILL_AREA(#509002); +#509002 = FILL_AREA_STYLE('',(#509003)); +#509003 = FILL_AREA_STYLE_COLOUR('',#506671); +#509004 = OVER_RIDING_STYLED_ITEM('overriding color',(#509005),#90221, + #506656); +#509005 = PRESENTATION_STYLE_ASSIGNMENT((#509006)); +#509006 = SURFACE_STYLE_USAGE(.BOTH.,#509007); +#509007 = SURFACE_SIDE_STYLE('',(#509008)); +#509008 = SURFACE_STYLE_FILL_AREA(#509009); +#509009 = FILL_AREA_STYLE('',(#509010)); +#509010 = FILL_AREA_STYLE_COLOUR('',#506671); +#509011 = OVER_RIDING_STYLED_ITEM('overriding color',(#509012),#90249, + #506656); +#509012 = PRESENTATION_STYLE_ASSIGNMENT((#509013)); +#509013 = SURFACE_STYLE_USAGE(.BOTH.,#509014); +#509014 = SURFACE_SIDE_STYLE('',(#509015)); +#509015 = SURFACE_STYLE_FILL_AREA(#509016); +#509016 = FILL_AREA_STYLE('',(#509017)); +#509017 = FILL_AREA_STYLE_COLOUR('',#506671); +#509018 = OVER_RIDING_STYLED_ITEM('overriding color',(#509019),#90352, + #506656); +#509019 = PRESENTATION_STYLE_ASSIGNMENT((#509020)); +#509020 = SURFACE_STYLE_USAGE(.BOTH.,#509021); +#509021 = SURFACE_SIDE_STYLE('',(#509022)); +#509022 = SURFACE_STYLE_FILL_AREA(#509023); +#509023 = FILL_AREA_STYLE('',(#509024)); +#509024 = FILL_AREA_STYLE_COLOUR('',#506671); +#509025 = OVER_RIDING_STYLED_ITEM('overriding color',(#509026),#90376, + #506656); +#509026 = PRESENTATION_STYLE_ASSIGNMENT((#509027)); +#509027 = SURFACE_STYLE_USAGE(.BOTH.,#509028); +#509028 = SURFACE_SIDE_STYLE('',(#509029)); +#509029 = SURFACE_STYLE_FILL_AREA(#509030); +#509030 = FILL_AREA_STYLE('',(#509031)); +#509031 = FILL_AREA_STYLE_COLOUR('',#506671); +#509032 = OVER_RIDING_STYLED_ITEM('overriding color',(#509033),#90394, + #506656); +#509033 = PRESENTATION_STYLE_ASSIGNMENT((#509034)); +#509034 = SURFACE_STYLE_USAGE(.BOTH.,#509035); +#509035 = SURFACE_SIDE_STYLE('',(#509036)); +#509036 = SURFACE_STYLE_FILL_AREA(#509037); +#509037 = FILL_AREA_STYLE('',(#509038)); +#509038 = FILL_AREA_STYLE_COLOUR('',#506671); +#509039 = OVER_RIDING_STYLED_ITEM('overriding color',(#509040),#90412, + #506656); +#509040 = PRESENTATION_STYLE_ASSIGNMENT((#509041)); +#509041 = SURFACE_STYLE_USAGE(.BOTH.,#509042); +#509042 = SURFACE_SIDE_STYLE('',(#509043)); +#509043 = SURFACE_STYLE_FILL_AREA(#509044); +#509044 = FILL_AREA_STYLE('',(#509045)); +#509045 = FILL_AREA_STYLE_COLOUR('',#506671); +#509046 = OVER_RIDING_STYLED_ITEM('overriding color',(#509047),#90430, + #506656); +#509047 = PRESENTATION_STYLE_ASSIGNMENT((#509048)); +#509048 = SURFACE_STYLE_USAGE(.BOTH.,#509049); +#509049 = SURFACE_SIDE_STYLE('',(#509050)); +#509050 = SURFACE_STYLE_FILL_AREA(#509051); +#509051 = FILL_AREA_STYLE('',(#509052)); +#509052 = FILL_AREA_STYLE_COLOUR('',#506671); +#509053 = OVER_RIDING_STYLED_ITEM('overriding color',(#509054),#90448, + #506656); +#509054 = PRESENTATION_STYLE_ASSIGNMENT((#509055)); +#509055 = SURFACE_STYLE_USAGE(.BOTH.,#509056); +#509056 = SURFACE_SIDE_STYLE('',(#509057)); +#509057 = SURFACE_STYLE_FILL_AREA(#509058); +#509058 = FILL_AREA_STYLE('',(#509059)); +#509059 = FILL_AREA_STYLE_COLOUR('',#506671); +#509060 = OVER_RIDING_STYLED_ITEM('overriding color',(#509061),#90466, + #506656); +#509061 = PRESENTATION_STYLE_ASSIGNMENT((#509062)); +#509062 = SURFACE_STYLE_USAGE(.BOTH.,#509063); +#509063 = SURFACE_SIDE_STYLE('',(#509064)); +#509064 = SURFACE_STYLE_FILL_AREA(#509065); +#509065 = FILL_AREA_STYLE('',(#509066)); +#509066 = FILL_AREA_STYLE_COLOUR('',#506671); +#509067 = OVER_RIDING_STYLED_ITEM('overriding color',(#509068),#90484, + #506656); +#509068 = PRESENTATION_STYLE_ASSIGNMENT((#509069)); +#509069 = SURFACE_STYLE_USAGE(.BOTH.,#509070); +#509070 = SURFACE_SIDE_STYLE('',(#509071)); +#509071 = SURFACE_STYLE_FILL_AREA(#509072); +#509072 = FILL_AREA_STYLE('',(#509073)); +#509073 = FILL_AREA_STYLE_COLOUR('',#506671); +#509074 = OVER_RIDING_STYLED_ITEM('overriding color',(#509075),#90496, + #506656); +#509075 = PRESENTATION_STYLE_ASSIGNMENT((#509076)); +#509076 = SURFACE_STYLE_USAGE(.BOTH.,#509077); +#509077 = SURFACE_SIDE_STYLE('',(#509078)); +#509078 = SURFACE_STYLE_FILL_AREA(#509079); +#509079 = FILL_AREA_STYLE('',(#509080)); +#509080 = FILL_AREA_STYLE_COLOUR('',#506671); +#509081 = OVER_RIDING_STYLED_ITEM('overriding color',(#509082),#90799, + #506656); +#509082 = PRESENTATION_STYLE_ASSIGNMENT((#509083)); +#509083 = SURFACE_STYLE_USAGE(.BOTH.,#509084); +#509084 = SURFACE_SIDE_STYLE('',(#509085)); +#509085 = SURFACE_STYLE_FILL_AREA(#509086); +#509086 = FILL_AREA_STYLE('',(#509087)); +#509087 = FILL_AREA_STYLE_COLOUR('',#506671); +#509088 = OVER_RIDING_STYLED_ITEM('overriding color',(#509089),#90817, + #506656); +#509089 = PRESENTATION_STYLE_ASSIGNMENT((#509090)); +#509090 = SURFACE_STYLE_USAGE(.BOTH.,#509091); +#509091 = SURFACE_SIDE_STYLE('',(#509092)); +#509092 = SURFACE_STYLE_FILL_AREA(#509093); +#509093 = FILL_AREA_STYLE('',(#509094)); +#509094 = FILL_AREA_STYLE_COLOUR('',#506671); +#509095 = OVER_RIDING_STYLED_ITEM('overriding color',(#509096),#90835, + #506656); +#509096 = PRESENTATION_STYLE_ASSIGNMENT((#509097)); +#509097 = SURFACE_STYLE_USAGE(.BOTH.,#509098); +#509098 = SURFACE_SIDE_STYLE('',(#509099)); +#509099 = SURFACE_STYLE_FILL_AREA(#509100); +#509100 = FILL_AREA_STYLE('',(#509101)); +#509101 = FILL_AREA_STYLE_COLOUR('',#506671); +#509102 = OVER_RIDING_STYLED_ITEM('overriding color',(#509103),#90877, + #506656); +#509103 = PRESENTATION_STYLE_ASSIGNMENT((#509104)); +#509104 = SURFACE_STYLE_USAGE(.BOTH.,#509105); +#509105 = SURFACE_SIDE_STYLE('',(#509106)); +#509106 = SURFACE_STYLE_FILL_AREA(#509107); +#509107 = FILL_AREA_STYLE('',(#509108)); +#509108 = FILL_AREA_STYLE_COLOUR('',#506671); +#509109 = OVER_RIDING_STYLED_ITEM('overriding color',(#509110),#90908, + #506656); +#509110 = PRESENTATION_STYLE_ASSIGNMENT((#509111)); +#509111 = SURFACE_STYLE_USAGE(.BOTH.,#509112); +#509112 = SURFACE_SIDE_STYLE('',(#509113)); +#509113 = SURFACE_STYLE_FILL_AREA(#509114); +#509114 = FILL_AREA_STYLE('',(#509115)); +#509115 = FILL_AREA_STYLE_COLOUR('',#506671); +#509116 = OVER_RIDING_STYLED_ITEM('overriding color',(#509117),#90926, + #506656); +#509117 = PRESENTATION_STYLE_ASSIGNMENT((#509118)); +#509118 = SURFACE_STYLE_USAGE(.BOTH.,#509119); +#509119 = SURFACE_SIDE_STYLE('',(#509120)); +#509120 = SURFACE_STYLE_FILL_AREA(#509121); +#509121 = FILL_AREA_STYLE('',(#509122)); +#509122 = FILL_AREA_STYLE_COLOUR('',#506671); +#509123 = OVER_RIDING_STYLED_ITEM('overriding color',(#509124),#90944, + #506656); +#509124 = PRESENTATION_STYLE_ASSIGNMENT((#509125)); +#509125 = SURFACE_STYLE_USAGE(.BOTH.,#509126); +#509126 = SURFACE_SIDE_STYLE('',(#509127)); +#509127 = SURFACE_STYLE_FILL_AREA(#509128); +#509128 = FILL_AREA_STYLE('',(#509129)); +#509129 = FILL_AREA_STYLE_COLOUR('',#506671); +#509130 = OVER_RIDING_STYLED_ITEM('overriding color',(#509131),#90963, + #506656); +#509131 = PRESENTATION_STYLE_ASSIGNMENT((#509132)); +#509132 = SURFACE_STYLE_USAGE(.BOTH.,#509133); +#509133 = SURFACE_SIDE_STYLE('',(#509134)); +#509134 = SURFACE_STYLE_FILL_AREA(#509135); +#509135 = FILL_AREA_STYLE('',(#509136)); +#509136 = FILL_AREA_STYLE_COLOUR('',#506671); +#509137 = OVER_RIDING_STYLED_ITEM('overriding color',(#509138),#90994, + #506656); +#509138 = PRESENTATION_STYLE_ASSIGNMENT((#509139)); +#509139 = SURFACE_STYLE_USAGE(.BOTH.,#509140); +#509140 = SURFACE_SIDE_STYLE('',(#509141)); +#509141 = SURFACE_STYLE_FILL_AREA(#509142); +#509142 = FILL_AREA_STYLE('',(#509143)); +#509143 = FILL_AREA_STYLE_COLOUR('',#506671); +#509144 = OVER_RIDING_STYLED_ITEM('overriding color',(#509145),#91018, + #506656); +#509145 = PRESENTATION_STYLE_ASSIGNMENT((#509146)); +#509146 = SURFACE_STYLE_USAGE(.BOTH.,#509147); +#509147 = SURFACE_SIDE_STYLE('',(#509148)); +#509148 = SURFACE_STYLE_FILL_AREA(#509149); +#509149 = FILL_AREA_STYLE('',(#509150)); +#509150 = FILL_AREA_STYLE_COLOUR('',#506671); +#509151 = OVER_RIDING_STYLED_ITEM('overriding color',(#509152),#91042, + #506656); +#509152 = PRESENTATION_STYLE_ASSIGNMENT((#509153)); +#509153 = SURFACE_STYLE_USAGE(.BOTH.,#509154); +#509154 = SURFACE_SIDE_STYLE('',(#509155)); +#509155 = SURFACE_STYLE_FILL_AREA(#509156); +#509156 = FILL_AREA_STYLE('',(#509157)); +#509157 = FILL_AREA_STYLE_COLOUR('',#506671); +#509158 = OVER_RIDING_STYLED_ITEM('overriding color',(#509159),#91061, + #506656); +#509159 = PRESENTATION_STYLE_ASSIGNMENT((#509160)); +#509160 = SURFACE_STYLE_USAGE(.BOTH.,#509161); +#509161 = SURFACE_SIDE_STYLE('',(#509162)); +#509162 = SURFACE_STYLE_FILL_AREA(#509163); +#509163 = FILL_AREA_STYLE('',(#509164)); +#509164 = FILL_AREA_STYLE_COLOUR('',#506671); +#509165 = OVER_RIDING_STYLED_ITEM('overriding color',(#509166),#91087, + #506656); +#509166 = PRESENTATION_STYLE_ASSIGNMENT((#509167)); +#509167 = SURFACE_STYLE_USAGE(.BOTH.,#509168); +#509168 = SURFACE_SIDE_STYLE('',(#509169)); +#509169 = SURFACE_STYLE_FILL_AREA(#509170); +#509170 = FILL_AREA_STYLE('',(#509171)); +#509171 = FILL_AREA_STYLE_COLOUR('',#506671); +#509172 = OVER_RIDING_STYLED_ITEM('overriding color',(#509173),#91111, + #506656); +#509173 = PRESENTATION_STYLE_ASSIGNMENT((#509174)); +#509174 = SURFACE_STYLE_USAGE(.BOTH.,#509175); +#509175 = SURFACE_SIDE_STYLE('',(#509176)); +#509176 = SURFACE_STYLE_FILL_AREA(#509177); +#509177 = FILL_AREA_STYLE('',(#509178)); +#509178 = FILL_AREA_STYLE_COLOUR('',#506671); +#509179 = OVER_RIDING_STYLED_ITEM('overriding color',(#509180),#91128, + #506656); +#509180 = PRESENTATION_STYLE_ASSIGNMENT((#509181)); +#509181 = SURFACE_STYLE_USAGE(.BOTH.,#509182); +#509182 = SURFACE_SIDE_STYLE('',(#509183)); +#509183 = SURFACE_STYLE_FILL_AREA(#509184); +#509184 = FILL_AREA_STYLE('',(#509185)); +#509185 = FILL_AREA_STYLE_COLOUR('',#506671); +#509186 = OVER_RIDING_STYLED_ITEM('overriding color',(#509187),#91153, + #506656); +#509187 = PRESENTATION_STYLE_ASSIGNMENT((#509188)); +#509188 = SURFACE_STYLE_USAGE(.BOTH.,#509189); +#509189 = SURFACE_SIDE_STYLE('',(#509190)); +#509190 = SURFACE_STYLE_FILL_AREA(#509191); +#509191 = FILL_AREA_STYLE('',(#509192)); +#509192 = FILL_AREA_STYLE_COLOUR('',#506671); +#509193 = OVER_RIDING_STYLED_ITEM('overriding color',(#509194),#91177, + #506656); +#509194 = PRESENTATION_STYLE_ASSIGNMENT((#509195)); +#509195 = SURFACE_STYLE_USAGE(.BOTH.,#509196); +#509196 = SURFACE_SIDE_STYLE('',(#509197)); +#509197 = SURFACE_STYLE_FILL_AREA(#509198); +#509198 = FILL_AREA_STYLE('',(#509199)); +#509199 = FILL_AREA_STYLE_COLOUR('',#506671); +#509200 = OVER_RIDING_STYLED_ITEM('overriding color',(#509201),#91208, + #506656); +#509201 = PRESENTATION_STYLE_ASSIGNMENT((#509202)); +#509202 = SURFACE_STYLE_USAGE(.BOTH.,#509203); +#509203 = SURFACE_SIDE_STYLE('',(#509204)); +#509204 = SURFACE_STYLE_FILL_AREA(#509205); +#509205 = FILL_AREA_STYLE('',(#509206)); +#509206 = FILL_AREA_STYLE_COLOUR('',#506671); +#509207 = OVER_RIDING_STYLED_ITEM('overriding color',(#509208),#91226, + #506656); +#509208 = PRESENTATION_STYLE_ASSIGNMENT((#509209)); +#509209 = SURFACE_STYLE_USAGE(.BOTH.,#509210); +#509210 = SURFACE_SIDE_STYLE('',(#509211)); +#509211 = SURFACE_STYLE_FILL_AREA(#509212); +#509212 = FILL_AREA_STYLE('',(#509213)); +#509213 = FILL_AREA_STYLE_COLOUR('',#506671); +#509214 = OVER_RIDING_STYLED_ITEM('overriding color',(#509215),#91362, + #506656); +#509215 = PRESENTATION_STYLE_ASSIGNMENT((#509216)); +#509216 = SURFACE_STYLE_USAGE(.BOTH.,#509217); +#509217 = SURFACE_SIDE_STYLE('',(#509218)); +#509218 = SURFACE_STYLE_FILL_AREA(#509219); +#509219 = FILL_AREA_STYLE('',(#509220)); +#509220 = FILL_AREA_STYLE_COLOUR('',#506671); +#509221 = OVER_RIDING_STYLED_ITEM('overriding color',(#509222),#91399, + #506656); +#509222 = PRESENTATION_STYLE_ASSIGNMENT((#509223)); +#509223 = SURFACE_STYLE_USAGE(.BOTH.,#509224); +#509224 = SURFACE_SIDE_STYLE('',(#509225)); +#509225 = SURFACE_STYLE_FILL_AREA(#509226); +#509226 = FILL_AREA_STYLE('',(#509227)); +#509227 = FILL_AREA_STYLE_COLOUR('',#506671); +#509228 = OVER_RIDING_STYLED_ITEM('overriding color',(#509229),#91426, + #506656); +#509229 = PRESENTATION_STYLE_ASSIGNMENT((#509230)); +#509230 = SURFACE_STYLE_USAGE(.BOTH.,#509231); +#509231 = SURFACE_SIDE_STYLE('',(#509232)); +#509232 = SURFACE_STYLE_FILL_AREA(#509233); +#509233 = FILL_AREA_STYLE('',(#509234)); +#509234 = FILL_AREA_STYLE_COLOUR('',#506671); +#509235 = OVER_RIDING_STYLED_ITEM('overriding color',(#509236),#91470, + #506656); +#509236 = PRESENTATION_STYLE_ASSIGNMENT((#509237)); +#509237 = SURFACE_STYLE_USAGE(.BOTH.,#509238); +#509238 = SURFACE_SIDE_STYLE('',(#509239)); +#509239 = SURFACE_STYLE_FILL_AREA(#509240); +#509240 = FILL_AREA_STYLE('',(#509241)); +#509241 = FILL_AREA_STYLE_COLOUR('',#506671); +#509242 = OVER_RIDING_STYLED_ITEM('overriding color',(#509243),#91490, + #506656); +#509243 = PRESENTATION_STYLE_ASSIGNMENT((#509244)); +#509244 = SURFACE_STYLE_USAGE(.BOTH.,#509245); +#509245 = SURFACE_SIDE_STYLE('',(#509246)); +#509246 = SURFACE_STYLE_FILL_AREA(#509247); +#509247 = FILL_AREA_STYLE('',(#509248)); +#509248 = FILL_AREA_STYLE_COLOUR('',#506671); +#509249 = OVER_RIDING_STYLED_ITEM('overriding color',(#509250),#91508, + #506656); +#509250 = PRESENTATION_STYLE_ASSIGNMENT((#509251)); +#509251 = SURFACE_STYLE_USAGE(.BOTH.,#509252); +#509252 = SURFACE_SIDE_STYLE('',(#509253)); +#509253 = SURFACE_STYLE_FILL_AREA(#509254); +#509254 = FILL_AREA_STYLE('',(#509255)); +#509255 = FILL_AREA_STYLE_COLOUR('',#506671); +#509256 = OVER_RIDING_STYLED_ITEM('overriding color',(#509257),#91524, + #506656); +#509257 = PRESENTATION_STYLE_ASSIGNMENT((#509258)); +#509258 = SURFACE_STYLE_USAGE(.BOTH.,#509259); +#509259 = SURFACE_SIDE_STYLE('',(#509260)); +#509260 = SURFACE_STYLE_FILL_AREA(#509261); +#509261 = FILL_AREA_STYLE('',(#509262)); +#509262 = FILL_AREA_STYLE_COLOUR('',#506671); +#509263 = OVER_RIDING_STYLED_ITEM('overriding color',(#509264),#91542, + #506656); +#509264 = PRESENTATION_STYLE_ASSIGNMENT((#509265)); +#509265 = SURFACE_STYLE_USAGE(.BOTH.,#509266); +#509266 = SURFACE_SIDE_STYLE('',(#509267)); +#509267 = SURFACE_STYLE_FILL_AREA(#509268); +#509268 = FILL_AREA_STYLE('',(#509269)); +#509269 = FILL_AREA_STYLE_COLOUR('',#506671); +#509270 = OVER_RIDING_STYLED_ITEM('overriding color',(#509271),#91558, + #506656); +#509271 = PRESENTATION_STYLE_ASSIGNMENT((#509272)); +#509272 = SURFACE_STYLE_USAGE(.BOTH.,#509273); +#509273 = SURFACE_SIDE_STYLE('',(#509274)); +#509274 = SURFACE_STYLE_FILL_AREA(#509275); +#509275 = FILL_AREA_STYLE('',(#509276)); +#509276 = FILL_AREA_STYLE_COLOUR('',#506671); +#509277 = OVER_RIDING_STYLED_ITEM('overriding color',(#509278),#91577, + #506656); +#509278 = PRESENTATION_STYLE_ASSIGNMENT((#509279)); +#509279 = SURFACE_STYLE_USAGE(.BOTH.,#509280); +#509280 = SURFACE_SIDE_STYLE('',(#509281)); +#509281 = SURFACE_STYLE_FILL_AREA(#509282); +#509282 = FILL_AREA_STYLE('',(#509283)); +#509283 = FILL_AREA_STYLE_COLOUR('',#506671); +#509284 = OVER_RIDING_STYLED_ITEM('overriding color',(#509285),#91596, + #506656); +#509285 = PRESENTATION_STYLE_ASSIGNMENT((#509286)); +#509286 = SURFACE_STYLE_USAGE(.BOTH.,#509287); +#509287 = SURFACE_SIDE_STYLE('',(#509288)); +#509288 = SURFACE_STYLE_FILL_AREA(#509289); +#509289 = FILL_AREA_STYLE('',(#509290)); +#509290 = FILL_AREA_STYLE_COLOUR('',#506671); +#509291 = OVER_RIDING_STYLED_ITEM('overriding color',(#509292),#91613, + #506656); +#509292 = PRESENTATION_STYLE_ASSIGNMENT((#509293)); +#509293 = SURFACE_STYLE_USAGE(.BOTH.,#509294); +#509294 = SURFACE_SIDE_STYLE('',(#509295)); +#509295 = SURFACE_STYLE_FILL_AREA(#509296); +#509296 = FILL_AREA_STYLE('',(#509297)); +#509297 = FILL_AREA_STYLE_COLOUR('',#506671); +#509298 = OVER_RIDING_STYLED_ITEM('overriding color',(#509299),#91630, + #506656); +#509299 = PRESENTATION_STYLE_ASSIGNMENT((#509300)); +#509300 = SURFACE_STYLE_USAGE(.BOTH.,#509301); +#509301 = SURFACE_SIDE_STYLE('',(#509302)); +#509302 = SURFACE_STYLE_FILL_AREA(#509303); +#509303 = FILL_AREA_STYLE('',(#509304)); +#509304 = FILL_AREA_STYLE_COLOUR('',#506671); +#509305 = OVER_RIDING_STYLED_ITEM('overriding color',(#509306),#91642, + #506656); +#509306 = PRESENTATION_STYLE_ASSIGNMENT((#509307)); +#509307 = SURFACE_STYLE_USAGE(.BOTH.,#509308); +#509308 = SURFACE_SIDE_STYLE('',(#509309)); +#509309 = SURFACE_STYLE_FILL_AREA(#509310); +#509310 = FILL_AREA_STYLE('',(#509311)); +#509311 = FILL_AREA_STYLE_COLOUR('',#509312); +#509312 = COLOUR_RGB('',0.949019609525,0.760784316928,0.18039215679); +#509313 = OVER_RIDING_STYLED_ITEM('overriding color',(#509314),#91673, + #506656); +#509314 = PRESENTATION_STYLE_ASSIGNMENT((#509315)); +#509315 = SURFACE_STYLE_USAGE(.BOTH.,#509316); +#509316 = SURFACE_SIDE_STYLE('',(#509317)); +#509317 = SURFACE_STYLE_FILL_AREA(#509318); +#509318 = FILL_AREA_STYLE('',(#509319)); +#509319 = FILL_AREA_STYLE_COLOUR('',#509312); +#509320 = OVER_RIDING_STYLED_ITEM('overriding color',(#509321),#91706, + #506656); +#509321 = PRESENTATION_STYLE_ASSIGNMENT((#509322)); +#509322 = SURFACE_STYLE_USAGE(.BOTH.,#509323); +#509323 = SURFACE_SIDE_STYLE('',(#509324)); +#509324 = SURFACE_STYLE_FILL_AREA(#509325); +#509325 = FILL_AREA_STYLE('',(#509326)); +#509326 = FILL_AREA_STYLE_COLOUR('',#509312); +#509327 = OVER_RIDING_STYLED_ITEM('overriding color',(#509328),#91739, + #506656); +#509328 = PRESENTATION_STYLE_ASSIGNMENT((#509329)); +#509329 = SURFACE_STYLE_USAGE(.BOTH.,#509330); +#509330 = SURFACE_SIDE_STYLE('',(#509331)); +#509331 = SURFACE_STYLE_FILL_AREA(#509332); +#509332 = FILL_AREA_STYLE('',(#509333)); +#509333 = FILL_AREA_STYLE_COLOUR('',#509312); +#509334 = OVER_RIDING_STYLED_ITEM('overriding color',(#509335),#91756, + #506656); +#509335 = PRESENTATION_STYLE_ASSIGNMENT((#509336)); +#509336 = SURFACE_STYLE_USAGE(.BOTH.,#509337); +#509337 = SURFACE_SIDE_STYLE('',(#509338)); +#509338 = SURFACE_STYLE_FILL_AREA(#509339); +#509339 = FILL_AREA_STYLE('',(#509340)); +#509340 = FILL_AREA_STYLE_COLOUR('',#509312); +#509341 = OVER_RIDING_STYLED_ITEM('overriding color',(#509342),#91773, + #506656); +#509342 = PRESENTATION_STYLE_ASSIGNMENT((#509343)); +#509343 = SURFACE_STYLE_USAGE(.BOTH.,#509344); +#509344 = SURFACE_SIDE_STYLE('',(#509345)); +#509345 = SURFACE_STYLE_FILL_AREA(#509346); +#509346 = FILL_AREA_STYLE('',(#509347)); +#509347 = FILL_AREA_STYLE_COLOUR('',#509312); +#509348 = OVER_RIDING_STYLED_ITEM('overriding color',(#509349),#91804, + #506656); +#509349 = PRESENTATION_STYLE_ASSIGNMENT((#509350)); +#509350 = SURFACE_STYLE_USAGE(.BOTH.,#509351); +#509351 = SURFACE_SIDE_STYLE('',(#509352)); +#509352 = SURFACE_STYLE_FILL_AREA(#509353); +#509353 = FILL_AREA_STYLE('',(#509354)); +#509354 = FILL_AREA_STYLE_COLOUR('',#509312); +#509355 = OVER_RIDING_STYLED_ITEM('overriding color',(#509356),#91837, + #506656); +#509356 = PRESENTATION_STYLE_ASSIGNMENT((#509357)); +#509357 = SURFACE_STYLE_USAGE(.BOTH.,#509358); +#509358 = SURFACE_SIDE_STYLE('',(#509359)); +#509359 = SURFACE_STYLE_FILL_AREA(#509360); +#509360 = FILL_AREA_STYLE('',(#509361)); +#509361 = FILL_AREA_STYLE_COLOUR('',#509312); +#509362 = OVER_RIDING_STYLED_ITEM('overriding color',(#509363),#91861, + #506656); +#509363 = PRESENTATION_STYLE_ASSIGNMENT((#509364)); +#509364 = SURFACE_STYLE_USAGE(.BOTH.,#509365); +#509365 = SURFACE_SIDE_STYLE('',(#509366)); +#509366 = SURFACE_STYLE_FILL_AREA(#509367); +#509367 = FILL_AREA_STYLE('',(#509368)); +#509368 = FILL_AREA_STYLE_COLOUR('',#509312); +#509369 = OVER_RIDING_STYLED_ITEM('overriding color',(#509370),#91887, + #506656); +#509370 = PRESENTATION_STYLE_ASSIGNMENT((#509371)); +#509371 = SURFACE_STYLE_USAGE(.BOTH.,#509372); +#509372 = SURFACE_SIDE_STYLE('',(#509373)); +#509373 = SURFACE_STYLE_FILL_AREA(#509374); +#509374 = FILL_AREA_STYLE('',(#509375)); +#509375 = FILL_AREA_STYLE_COLOUR('',#509312); +#509376 = OVER_RIDING_STYLED_ITEM('overriding color',(#509377),#91904, + #506656); +#509377 = PRESENTATION_STYLE_ASSIGNMENT((#509378)); +#509378 = SURFACE_STYLE_USAGE(.BOTH.,#509379); +#509379 = SURFACE_SIDE_STYLE('',(#509380)); +#509380 = SURFACE_STYLE_FILL_AREA(#509381); +#509381 = FILL_AREA_STYLE('',(#509382)); +#509382 = FILL_AREA_STYLE_COLOUR('',#509312); +#509383 = OVER_RIDING_STYLED_ITEM('overriding color',(#509384),#91935, + #506656); +#509384 = PRESENTATION_STYLE_ASSIGNMENT((#509385)); +#509385 = SURFACE_STYLE_USAGE(.BOTH.,#509386); +#509386 = SURFACE_SIDE_STYLE('',(#509387)); +#509387 = SURFACE_STYLE_FILL_AREA(#509388); +#509388 = FILL_AREA_STYLE('',(#509389)); +#509389 = FILL_AREA_STYLE_COLOUR('',#509312); +#509390 = OVER_RIDING_STYLED_ITEM('overriding color',(#509391),#91968, + #506656); +#509391 = PRESENTATION_STYLE_ASSIGNMENT((#509392)); +#509392 = SURFACE_STYLE_USAGE(.BOTH.,#509393); +#509393 = SURFACE_SIDE_STYLE('',(#509394)); +#509394 = SURFACE_STYLE_FILL_AREA(#509395); +#509395 = FILL_AREA_STYLE('',(#509396)); +#509396 = FILL_AREA_STYLE_COLOUR('',#509312); +#509397 = OVER_RIDING_STYLED_ITEM('overriding color',(#509398),#91992, + #506656); +#509398 = PRESENTATION_STYLE_ASSIGNMENT((#509399)); +#509399 = SURFACE_STYLE_USAGE(.BOTH.,#509400); +#509400 = SURFACE_SIDE_STYLE('',(#509401)); +#509401 = SURFACE_STYLE_FILL_AREA(#509402); +#509402 = FILL_AREA_STYLE('',(#509403)); +#509403 = FILL_AREA_STYLE_COLOUR('',#509312); +#509404 = OVER_RIDING_STYLED_ITEM('overriding color',(#509405),#92018, + #506656); +#509405 = PRESENTATION_STYLE_ASSIGNMENT((#509406)); +#509406 = SURFACE_STYLE_USAGE(.BOTH.,#509407); +#509407 = SURFACE_SIDE_STYLE('',(#509408)); +#509408 = SURFACE_STYLE_FILL_AREA(#509409); +#509409 = FILL_AREA_STYLE('',(#509410)); +#509410 = FILL_AREA_STYLE_COLOUR('',#509312); +#509411 = OVER_RIDING_STYLED_ITEM('overriding color',(#509412),#92035, + #506656); +#509412 = PRESENTATION_STYLE_ASSIGNMENT((#509413)); +#509413 = SURFACE_STYLE_USAGE(.BOTH.,#509414); +#509414 = SURFACE_SIDE_STYLE('',(#509415)); +#509415 = SURFACE_STYLE_FILL_AREA(#509416); +#509416 = FILL_AREA_STYLE('',(#509417)); +#509417 = FILL_AREA_STYLE_COLOUR('',#509312); +#509418 = OVER_RIDING_STYLED_ITEM('overriding color',(#509419),#92066, + #506656); +#509419 = PRESENTATION_STYLE_ASSIGNMENT((#509420)); +#509420 = SURFACE_STYLE_USAGE(.BOTH.,#509421); +#509421 = SURFACE_SIDE_STYLE('',(#509422)); +#509422 = SURFACE_STYLE_FILL_AREA(#509423); +#509423 = FILL_AREA_STYLE('',(#509424)); +#509424 = FILL_AREA_STYLE_COLOUR('',#509312); +#509425 = OVER_RIDING_STYLED_ITEM('overriding color',(#509426),#92099, + #506656); +#509426 = PRESENTATION_STYLE_ASSIGNMENT((#509427)); +#509427 = SURFACE_STYLE_USAGE(.BOTH.,#509428); +#509428 = SURFACE_SIDE_STYLE('',(#509429)); +#509429 = SURFACE_STYLE_FILL_AREA(#509430); +#509430 = FILL_AREA_STYLE('',(#509431)); +#509431 = FILL_AREA_STYLE_COLOUR('',#509312); +#509432 = OVER_RIDING_STYLED_ITEM('overriding color',(#509433),#92123, + #506656); +#509433 = PRESENTATION_STYLE_ASSIGNMENT((#509434)); +#509434 = SURFACE_STYLE_USAGE(.BOTH.,#509435); +#509435 = SURFACE_SIDE_STYLE('',(#509436)); +#509436 = SURFACE_STYLE_FILL_AREA(#509437); +#509437 = FILL_AREA_STYLE('',(#509438)); +#509438 = FILL_AREA_STYLE_COLOUR('',#509312); +#509439 = OVER_RIDING_STYLED_ITEM('overriding color',(#509440),#92149, + #506656); +#509440 = PRESENTATION_STYLE_ASSIGNMENT((#509441)); +#509441 = SURFACE_STYLE_USAGE(.BOTH.,#509442); +#509442 = SURFACE_SIDE_STYLE('',(#509443)); +#509443 = SURFACE_STYLE_FILL_AREA(#509444); +#509444 = FILL_AREA_STYLE('',(#509445)); +#509445 = FILL_AREA_STYLE_COLOUR('',#509312); +#509446 = OVER_RIDING_STYLED_ITEM('overriding color',(#509447),#92166, + #506656); +#509447 = PRESENTATION_STYLE_ASSIGNMENT((#509448)); +#509448 = SURFACE_STYLE_USAGE(.BOTH.,#509449); +#509449 = SURFACE_SIDE_STYLE('',(#509450)); +#509450 = SURFACE_STYLE_FILL_AREA(#509451); +#509451 = FILL_AREA_STYLE('',(#509452)); +#509452 = FILL_AREA_STYLE_COLOUR('',#509312); +#509453 = OVER_RIDING_STYLED_ITEM('overriding color',(#509454),#92197, + #506656); +#509454 = PRESENTATION_STYLE_ASSIGNMENT((#509455)); +#509455 = SURFACE_STYLE_USAGE(.BOTH.,#509456); +#509456 = SURFACE_SIDE_STYLE('',(#509457)); +#509457 = SURFACE_STYLE_FILL_AREA(#509458); +#509458 = FILL_AREA_STYLE('',(#509459)); +#509459 = FILL_AREA_STYLE_COLOUR('',#509312); +#509460 = OVER_RIDING_STYLED_ITEM('overriding color',(#509461),#92230, + #506656); +#509461 = PRESENTATION_STYLE_ASSIGNMENT((#509462)); +#509462 = SURFACE_STYLE_USAGE(.BOTH.,#509463); +#509463 = SURFACE_SIDE_STYLE('',(#509464)); +#509464 = SURFACE_STYLE_FILL_AREA(#509465); +#509465 = FILL_AREA_STYLE('',(#509466)); +#509466 = FILL_AREA_STYLE_COLOUR('',#509312); +#509467 = OVER_RIDING_STYLED_ITEM('overriding color',(#509468),#92254, + #506656); +#509468 = PRESENTATION_STYLE_ASSIGNMENT((#509469)); +#509469 = SURFACE_STYLE_USAGE(.BOTH.,#509470); +#509470 = SURFACE_SIDE_STYLE('',(#509471)); +#509471 = SURFACE_STYLE_FILL_AREA(#509472); +#509472 = FILL_AREA_STYLE('',(#509473)); +#509473 = FILL_AREA_STYLE_COLOUR('',#509312); +#509474 = OVER_RIDING_STYLED_ITEM('overriding color',(#509475),#92280, + #506656); +#509475 = PRESENTATION_STYLE_ASSIGNMENT((#509476)); +#509476 = SURFACE_STYLE_USAGE(.BOTH.,#509477); +#509477 = SURFACE_SIDE_STYLE('',(#509478)); +#509478 = SURFACE_STYLE_FILL_AREA(#509479); +#509479 = FILL_AREA_STYLE('',(#509480)); +#509480 = FILL_AREA_STYLE_COLOUR('',#509312); +#509481 = OVER_RIDING_STYLED_ITEM('overriding color',(#509482),#92297, + #506656); +#509482 = PRESENTATION_STYLE_ASSIGNMENT((#509483)); +#509483 = SURFACE_STYLE_USAGE(.BOTH.,#509484); +#509484 = SURFACE_SIDE_STYLE('',(#509485)); +#509485 = SURFACE_STYLE_FILL_AREA(#509486); +#509486 = FILL_AREA_STYLE('',(#509487)); +#509487 = FILL_AREA_STYLE_COLOUR('',#509312); +#509488 = OVER_RIDING_STYLED_ITEM('overriding color',(#509489),#92328, + #506656); +#509489 = PRESENTATION_STYLE_ASSIGNMENT((#509490)); +#509490 = SURFACE_STYLE_USAGE(.BOTH.,#509491); +#509491 = SURFACE_SIDE_STYLE('',(#509492)); +#509492 = SURFACE_STYLE_FILL_AREA(#509493); +#509493 = FILL_AREA_STYLE('',(#509494)); +#509494 = FILL_AREA_STYLE_COLOUR('',#509312); +#509495 = OVER_RIDING_STYLED_ITEM('overriding color',(#509496),#92361, + #506656); +#509496 = PRESENTATION_STYLE_ASSIGNMENT((#509497)); +#509497 = SURFACE_STYLE_USAGE(.BOTH.,#509498); +#509498 = SURFACE_SIDE_STYLE('',(#509499)); +#509499 = SURFACE_STYLE_FILL_AREA(#509500); +#509500 = FILL_AREA_STYLE('',(#509501)); +#509501 = FILL_AREA_STYLE_COLOUR('',#509312); +#509502 = OVER_RIDING_STYLED_ITEM('overriding color',(#509503),#92385, + #506656); +#509503 = PRESENTATION_STYLE_ASSIGNMENT((#509504)); +#509504 = SURFACE_STYLE_USAGE(.BOTH.,#509505); +#509505 = SURFACE_SIDE_STYLE('',(#509506)); +#509506 = SURFACE_STYLE_FILL_AREA(#509507); +#509507 = FILL_AREA_STYLE('',(#509508)); +#509508 = FILL_AREA_STYLE_COLOUR('',#509312); +#509509 = OVER_RIDING_STYLED_ITEM('overriding color',(#509510),#92411, + #506656); +#509510 = PRESENTATION_STYLE_ASSIGNMENT((#509511)); +#509511 = SURFACE_STYLE_USAGE(.BOTH.,#509512); +#509512 = SURFACE_SIDE_STYLE('',(#509513)); +#509513 = SURFACE_STYLE_FILL_AREA(#509514); +#509514 = FILL_AREA_STYLE('',(#509515)); +#509515 = FILL_AREA_STYLE_COLOUR('',#509312); +#509516 = OVER_RIDING_STYLED_ITEM('overriding color',(#509517),#92428, + #506656); +#509517 = PRESENTATION_STYLE_ASSIGNMENT((#509518)); +#509518 = SURFACE_STYLE_USAGE(.BOTH.,#509519); +#509519 = SURFACE_SIDE_STYLE('',(#509520)); +#509520 = SURFACE_STYLE_FILL_AREA(#509521); +#509521 = FILL_AREA_STYLE('',(#509522)); +#509522 = FILL_AREA_STYLE_COLOUR('',#509312); +#509523 = OVER_RIDING_STYLED_ITEM('overriding color',(#509524),#92459, + #506656); +#509524 = PRESENTATION_STYLE_ASSIGNMENT((#509525)); +#509525 = SURFACE_STYLE_USAGE(.BOTH.,#509526); +#509526 = SURFACE_SIDE_STYLE('',(#509527)); +#509527 = SURFACE_STYLE_FILL_AREA(#509528); +#509528 = FILL_AREA_STYLE('',(#509529)); +#509529 = FILL_AREA_STYLE_COLOUR('',#509312); +#509530 = OVER_RIDING_STYLED_ITEM('overriding color',(#509531),#92492, + #506656); +#509531 = PRESENTATION_STYLE_ASSIGNMENT((#509532)); +#509532 = SURFACE_STYLE_USAGE(.BOTH.,#509533); +#509533 = SURFACE_SIDE_STYLE('',(#509534)); +#509534 = SURFACE_STYLE_FILL_AREA(#509535); +#509535 = FILL_AREA_STYLE('',(#509536)); +#509536 = FILL_AREA_STYLE_COLOUR('',#509312); +#509537 = OVER_RIDING_STYLED_ITEM('overriding color',(#509538),#92516, + #506656); +#509538 = PRESENTATION_STYLE_ASSIGNMENT((#509539)); +#509539 = SURFACE_STYLE_USAGE(.BOTH.,#509540); +#509540 = SURFACE_SIDE_STYLE('',(#509541)); +#509541 = SURFACE_STYLE_FILL_AREA(#509542); +#509542 = FILL_AREA_STYLE('',(#509543)); +#509543 = FILL_AREA_STYLE_COLOUR('',#509312); +#509544 = OVER_RIDING_STYLED_ITEM('overriding color',(#509545),#92542, + #506656); +#509545 = PRESENTATION_STYLE_ASSIGNMENT((#509546)); +#509546 = SURFACE_STYLE_USAGE(.BOTH.,#509547); +#509547 = SURFACE_SIDE_STYLE('',(#509548)); +#509548 = SURFACE_STYLE_FILL_AREA(#509549); +#509549 = FILL_AREA_STYLE('',(#509550)); +#509550 = FILL_AREA_STYLE_COLOUR('',#509312); +#509551 = OVER_RIDING_STYLED_ITEM('overriding color',(#509552),#92559, + #506656); +#509552 = PRESENTATION_STYLE_ASSIGNMENT((#509553)); +#509553 = SURFACE_STYLE_USAGE(.BOTH.,#509554); +#509554 = SURFACE_SIDE_STYLE('',(#509555)); +#509555 = SURFACE_STYLE_FILL_AREA(#509556); +#509556 = FILL_AREA_STYLE('',(#509557)); +#509557 = FILL_AREA_STYLE_COLOUR('',#509312); +#509558 = OVER_RIDING_STYLED_ITEM('overriding color',(#509559),#92590, + #506656); +#509559 = PRESENTATION_STYLE_ASSIGNMENT((#509560)); +#509560 = SURFACE_STYLE_USAGE(.BOTH.,#509561); +#509561 = SURFACE_SIDE_STYLE('',(#509562)); +#509562 = SURFACE_STYLE_FILL_AREA(#509563); +#509563 = FILL_AREA_STYLE('',(#509564)); +#509564 = FILL_AREA_STYLE_COLOUR('',#509312); +#509565 = OVER_RIDING_STYLED_ITEM('overriding color',(#509566),#92623, + #506656); +#509566 = PRESENTATION_STYLE_ASSIGNMENT((#509567)); +#509567 = SURFACE_STYLE_USAGE(.BOTH.,#509568); +#509568 = SURFACE_SIDE_STYLE('',(#509569)); +#509569 = SURFACE_STYLE_FILL_AREA(#509570); +#509570 = FILL_AREA_STYLE('',(#509571)); +#509571 = FILL_AREA_STYLE_COLOUR('',#509312); +#509572 = OVER_RIDING_STYLED_ITEM('overriding color',(#509573),#92647, + #506656); +#509573 = PRESENTATION_STYLE_ASSIGNMENT((#509574)); +#509574 = SURFACE_STYLE_USAGE(.BOTH.,#509575); +#509575 = SURFACE_SIDE_STYLE('',(#509576)); +#509576 = SURFACE_STYLE_FILL_AREA(#509577); +#509577 = FILL_AREA_STYLE('',(#509578)); +#509578 = FILL_AREA_STYLE_COLOUR('',#509312); +#509579 = OVER_RIDING_STYLED_ITEM('overriding color',(#509580),#92673, + #506656); +#509580 = PRESENTATION_STYLE_ASSIGNMENT((#509581)); +#509581 = SURFACE_STYLE_USAGE(.BOTH.,#509582); +#509582 = SURFACE_SIDE_STYLE('',(#509583)); +#509583 = SURFACE_STYLE_FILL_AREA(#509584); +#509584 = FILL_AREA_STYLE('',(#509585)); +#509585 = FILL_AREA_STYLE_COLOUR('',#509312); +#509586 = OVER_RIDING_STYLED_ITEM('overriding color',(#509587),#92690, + #506656); +#509587 = PRESENTATION_STYLE_ASSIGNMENT((#509588)); +#509588 = SURFACE_STYLE_USAGE(.BOTH.,#509589); +#509589 = SURFACE_SIDE_STYLE('',(#509590)); +#509590 = SURFACE_STYLE_FILL_AREA(#509591); +#509591 = FILL_AREA_STYLE('',(#509592)); +#509592 = FILL_AREA_STYLE_COLOUR('',#509312); +#509593 = OVER_RIDING_STYLED_ITEM('overriding color',(#509594),#92721, + #506656); +#509594 = PRESENTATION_STYLE_ASSIGNMENT((#509595)); +#509595 = SURFACE_STYLE_USAGE(.BOTH.,#509596); +#509596 = SURFACE_SIDE_STYLE('',(#509597)); +#509597 = SURFACE_STYLE_FILL_AREA(#509598); +#509598 = FILL_AREA_STYLE('',(#509599)); +#509599 = FILL_AREA_STYLE_COLOUR('',#509312); +#509600 = OVER_RIDING_STYLED_ITEM('overriding color',(#509601),#92754, + #506656); +#509601 = PRESENTATION_STYLE_ASSIGNMENT((#509602)); +#509602 = SURFACE_STYLE_USAGE(.BOTH.,#509603); +#509603 = SURFACE_SIDE_STYLE('',(#509604)); +#509604 = SURFACE_STYLE_FILL_AREA(#509605); +#509605 = FILL_AREA_STYLE('',(#509606)); +#509606 = FILL_AREA_STYLE_COLOUR('',#509312); +#509607 = OVER_RIDING_STYLED_ITEM('overriding color',(#509608),#92778, + #506656); +#509608 = PRESENTATION_STYLE_ASSIGNMENT((#509609)); +#509609 = SURFACE_STYLE_USAGE(.BOTH.,#509610); +#509610 = SURFACE_SIDE_STYLE('',(#509611)); +#509611 = SURFACE_STYLE_FILL_AREA(#509612); +#509612 = FILL_AREA_STYLE('',(#509613)); +#509613 = FILL_AREA_STYLE_COLOUR('',#509312); +#509614 = OVER_RIDING_STYLED_ITEM('overriding color',(#509615),#92804, + #506656); +#509615 = PRESENTATION_STYLE_ASSIGNMENT((#509616)); +#509616 = SURFACE_STYLE_USAGE(.BOTH.,#509617); +#509617 = SURFACE_SIDE_STYLE('',(#509618)); +#509618 = SURFACE_STYLE_FILL_AREA(#509619); +#509619 = FILL_AREA_STYLE('',(#509620)); +#509620 = FILL_AREA_STYLE_COLOUR('',#509312); +#509621 = OVER_RIDING_STYLED_ITEM('overriding color',(#509622),#92821, + #506656); +#509622 = PRESENTATION_STYLE_ASSIGNMENT((#509623)); +#509623 = SURFACE_STYLE_USAGE(.BOTH.,#509624); +#509624 = SURFACE_SIDE_STYLE('',(#509625)); +#509625 = SURFACE_STYLE_FILL_AREA(#509626); +#509626 = FILL_AREA_STYLE('',(#509627)); +#509627 = FILL_AREA_STYLE_COLOUR('',#509312); +#509628 = OVER_RIDING_STYLED_ITEM('overriding color',(#509629),#92852, + #506656); +#509629 = PRESENTATION_STYLE_ASSIGNMENT((#509630)); +#509630 = SURFACE_STYLE_USAGE(.BOTH.,#509631); +#509631 = SURFACE_SIDE_STYLE('',(#509632)); +#509632 = SURFACE_STYLE_FILL_AREA(#509633); +#509633 = FILL_AREA_STYLE('',(#509634)); +#509634 = FILL_AREA_STYLE_COLOUR('',#509312); +#509635 = OVER_RIDING_STYLED_ITEM('overriding color',(#509636),#92885, + #506656); +#509636 = PRESENTATION_STYLE_ASSIGNMENT((#509637)); +#509637 = SURFACE_STYLE_USAGE(.BOTH.,#509638); +#509638 = SURFACE_SIDE_STYLE('',(#509639)); +#509639 = SURFACE_STYLE_FILL_AREA(#509640); +#509640 = FILL_AREA_STYLE('',(#509641)); +#509641 = FILL_AREA_STYLE_COLOUR('',#509312); +#509642 = OVER_RIDING_STYLED_ITEM('overriding color',(#509643),#92909, + #506656); +#509643 = PRESENTATION_STYLE_ASSIGNMENT((#509644)); +#509644 = SURFACE_STYLE_USAGE(.BOTH.,#509645); +#509645 = SURFACE_SIDE_STYLE('',(#509646)); +#509646 = SURFACE_STYLE_FILL_AREA(#509647); +#509647 = FILL_AREA_STYLE('',(#509648)); +#509648 = FILL_AREA_STYLE_COLOUR('',#509312); +#509649 = OVER_RIDING_STYLED_ITEM('overriding color',(#509650),#92935, + #506656); +#509650 = PRESENTATION_STYLE_ASSIGNMENT((#509651)); +#509651 = SURFACE_STYLE_USAGE(.BOTH.,#509652); +#509652 = SURFACE_SIDE_STYLE('',(#509653)); +#509653 = SURFACE_STYLE_FILL_AREA(#509654); +#509654 = FILL_AREA_STYLE('',(#509655)); +#509655 = FILL_AREA_STYLE_COLOUR('',#509312); +#509656 = OVER_RIDING_STYLED_ITEM('overriding color',(#509657),#92952, + #506656); +#509657 = PRESENTATION_STYLE_ASSIGNMENT((#509658)); +#509658 = SURFACE_STYLE_USAGE(.BOTH.,#509659); +#509659 = SURFACE_SIDE_STYLE('',(#509660)); +#509660 = SURFACE_STYLE_FILL_AREA(#509661); +#509661 = FILL_AREA_STYLE('',(#509662)); +#509662 = FILL_AREA_STYLE_COLOUR('',#509312); +#509663 = OVER_RIDING_STYLED_ITEM('overriding color',(#509664),#92983, + #506656); +#509664 = PRESENTATION_STYLE_ASSIGNMENT((#509665)); +#509665 = SURFACE_STYLE_USAGE(.BOTH.,#509666); +#509666 = SURFACE_SIDE_STYLE('',(#509667)); +#509667 = SURFACE_STYLE_FILL_AREA(#509668); +#509668 = FILL_AREA_STYLE('',(#509669)); +#509669 = FILL_AREA_STYLE_COLOUR('',#509312); +#509670 = OVER_RIDING_STYLED_ITEM('overriding color',(#509671),#93016, + #506656); +#509671 = PRESENTATION_STYLE_ASSIGNMENT((#509672)); +#509672 = SURFACE_STYLE_USAGE(.BOTH.,#509673); +#509673 = SURFACE_SIDE_STYLE('',(#509674)); +#509674 = SURFACE_STYLE_FILL_AREA(#509675); +#509675 = FILL_AREA_STYLE('',(#509676)); +#509676 = FILL_AREA_STYLE_COLOUR('',#509312); +#509677 = OVER_RIDING_STYLED_ITEM('overriding color',(#509678),#93040, + #506656); +#509678 = PRESENTATION_STYLE_ASSIGNMENT((#509679)); +#509679 = SURFACE_STYLE_USAGE(.BOTH.,#509680); +#509680 = SURFACE_SIDE_STYLE('',(#509681)); +#509681 = SURFACE_STYLE_FILL_AREA(#509682); +#509682 = FILL_AREA_STYLE('',(#509683)); +#509683 = FILL_AREA_STYLE_COLOUR('',#509312); +#509684 = OVER_RIDING_STYLED_ITEM('overriding color',(#509685),#93066, + #506656); +#509685 = PRESENTATION_STYLE_ASSIGNMENT((#509686)); +#509686 = SURFACE_STYLE_USAGE(.BOTH.,#509687); +#509687 = SURFACE_SIDE_STYLE('',(#509688)); +#509688 = SURFACE_STYLE_FILL_AREA(#509689); +#509689 = FILL_AREA_STYLE('',(#509690)); +#509690 = FILL_AREA_STYLE_COLOUR('',#509312); +#509691 = OVER_RIDING_STYLED_ITEM('overriding color',(#509692),#93083, + #506656); +#509692 = PRESENTATION_STYLE_ASSIGNMENT((#509693)); +#509693 = SURFACE_STYLE_USAGE(.BOTH.,#509694); +#509694 = SURFACE_SIDE_STYLE('',(#509695)); +#509695 = SURFACE_STYLE_FILL_AREA(#509696); +#509696 = FILL_AREA_STYLE('',(#509697)); +#509697 = FILL_AREA_STYLE_COLOUR('',#509312); +#509698 = OVER_RIDING_STYLED_ITEM('overriding color',(#509699),#93114, + #506656); +#509699 = PRESENTATION_STYLE_ASSIGNMENT((#509700)); +#509700 = SURFACE_STYLE_USAGE(.BOTH.,#509701); +#509701 = SURFACE_SIDE_STYLE('',(#509702)); +#509702 = SURFACE_STYLE_FILL_AREA(#509703); +#509703 = FILL_AREA_STYLE('',(#509704)); +#509704 = FILL_AREA_STYLE_COLOUR('',#509312); +#509705 = OVER_RIDING_STYLED_ITEM('overriding color',(#509706),#93147, + #506656); +#509706 = PRESENTATION_STYLE_ASSIGNMENT((#509707)); +#509707 = SURFACE_STYLE_USAGE(.BOTH.,#509708); +#509708 = SURFACE_SIDE_STYLE('',(#509709)); +#509709 = SURFACE_STYLE_FILL_AREA(#509710); +#509710 = FILL_AREA_STYLE('',(#509711)); +#509711 = FILL_AREA_STYLE_COLOUR('',#509312); +#509712 = OVER_RIDING_STYLED_ITEM('overriding color',(#509713),#93180, + #506656); +#509713 = PRESENTATION_STYLE_ASSIGNMENT((#509714)); +#509714 = SURFACE_STYLE_USAGE(.BOTH.,#509715); +#509715 = SURFACE_SIDE_STYLE('',(#509716)); +#509716 = SURFACE_STYLE_FILL_AREA(#509717); +#509717 = FILL_AREA_STYLE('',(#509718)); +#509718 = FILL_AREA_STYLE_COLOUR('',#509312); +#509719 = OVER_RIDING_STYLED_ITEM('overriding color',(#509720),#93197, + #506656); +#509720 = PRESENTATION_STYLE_ASSIGNMENT((#509721)); +#509721 = SURFACE_STYLE_USAGE(.BOTH.,#509722); +#509722 = SURFACE_SIDE_STYLE('',(#509723)); +#509723 = SURFACE_STYLE_FILL_AREA(#509724); +#509724 = FILL_AREA_STYLE('',(#509725)); +#509725 = FILL_AREA_STYLE_COLOUR('',#509312); +#509726 = OVER_RIDING_STYLED_ITEM('overriding color',(#509727),#93214, + #506656); +#509727 = PRESENTATION_STYLE_ASSIGNMENT((#509728)); +#509728 = SURFACE_STYLE_USAGE(.BOTH.,#509729); +#509729 = SURFACE_SIDE_STYLE('',(#509730)); +#509730 = SURFACE_STYLE_FILL_AREA(#509731); +#509731 = FILL_AREA_STYLE('',(#509732)); +#509732 = FILL_AREA_STYLE_COLOUR('',#509312); +#509733 = OVER_RIDING_STYLED_ITEM('overriding color',(#509734),#93226, + #506656); +#509734 = PRESENTATION_STYLE_ASSIGNMENT((#509735)); +#509735 = SURFACE_STYLE_USAGE(.BOTH.,#509736); +#509736 = SURFACE_SIDE_STYLE('',(#509737)); +#509737 = SURFACE_STYLE_FILL_AREA(#509738); +#509738 = FILL_AREA_STYLE('',(#509739)); +#509739 = FILL_AREA_STYLE_COLOUR('',#509312); +#509740 = OVER_RIDING_STYLED_ITEM('overriding color',(#509741),#93238, + #506656); +#509741 = PRESENTATION_STYLE_ASSIGNMENT((#509742)); +#509742 = SURFACE_STYLE_USAGE(.BOTH.,#509743); +#509743 = SURFACE_SIDE_STYLE('',(#509744)); +#509744 = SURFACE_STYLE_FILL_AREA(#509745); +#509745 = FILL_AREA_STYLE('',(#509746)); +#509746 = FILL_AREA_STYLE_COLOUR('',#509312); +#509747 = OVER_RIDING_STYLED_ITEM('overriding color',(#509748),#93250, + #506656); +#509748 = PRESENTATION_STYLE_ASSIGNMENT((#509749)); +#509749 = SURFACE_STYLE_USAGE(.BOTH.,#509750); +#509750 = SURFACE_SIDE_STYLE('',(#509751)); +#509751 = SURFACE_STYLE_FILL_AREA(#509752); +#509752 = FILL_AREA_STYLE('',(#509753)); +#509753 = FILL_AREA_STYLE_COLOUR('',#509312); +#509754 = OVER_RIDING_STYLED_ITEM('overriding color',(#509755),#93262, + #506656); +#509755 = PRESENTATION_STYLE_ASSIGNMENT((#509756)); +#509756 = SURFACE_STYLE_USAGE(.BOTH.,#509757); +#509757 = SURFACE_SIDE_STYLE('',(#509758)); +#509758 = SURFACE_STYLE_FILL_AREA(#509759); +#509759 = FILL_AREA_STYLE('',(#509760)); +#509760 = FILL_AREA_STYLE_COLOUR('',#509312); +#509761 = OVER_RIDING_STYLED_ITEM('overriding color',(#509762),#93274, + #506656); +#509762 = PRESENTATION_STYLE_ASSIGNMENT((#509763)); +#509763 = SURFACE_STYLE_USAGE(.BOTH.,#509764); +#509764 = SURFACE_SIDE_STYLE('',(#509765)); +#509765 = SURFACE_STYLE_FILL_AREA(#509766); +#509766 = FILL_AREA_STYLE('',(#509767)); +#509767 = FILL_AREA_STYLE_COLOUR('',#509312); +#509768 = OVER_RIDING_STYLED_ITEM('overriding color',(#509769),#93286, + #506656); +#509769 = PRESENTATION_STYLE_ASSIGNMENT((#509770)); +#509770 = SURFACE_STYLE_USAGE(.BOTH.,#509771); +#509771 = SURFACE_SIDE_STYLE('',(#509772)); +#509772 = SURFACE_STYLE_FILL_AREA(#509773); +#509773 = FILL_AREA_STYLE('',(#509774)); +#509774 = FILL_AREA_STYLE_COLOUR('',#509312); +#509775 = OVER_RIDING_STYLED_ITEM('overriding color',(#509776),#93298, + #506656); +#509776 = PRESENTATION_STYLE_ASSIGNMENT((#509777)); +#509777 = SURFACE_STYLE_USAGE(.BOTH.,#509778); +#509778 = SURFACE_SIDE_STYLE('',(#509779)); +#509779 = SURFACE_STYLE_FILL_AREA(#509780); +#509780 = FILL_AREA_STYLE('',(#509781)); +#509781 = FILL_AREA_STYLE_COLOUR('',#509312); +#509782 = OVER_RIDING_STYLED_ITEM('overriding color',(#509783),#93310, + #506656); +#509783 = PRESENTATION_STYLE_ASSIGNMENT((#509784)); +#509784 = SURFACE_STYLE_USAGE(.BOTH.,#509785); +#509785 = SURFACE_SIDE_STYLE('',(#509786)); +#509786 = SURFACE_STYLE_FILL_AREA(#509787); +#509787 = FILL_AREA_STYLE('',(#509788)); +#509788 = FILL_AREA_STYLE_COLOUR('',#509312); +#509789 = OVER_RIDING_STYLED_ITEM('overriding color',(#509790),#93322, + #506656); +#509790 = PRESENTATION_STYLE_ASSIGNMENT((#509791)); +#509791 = SURFACE_STYLE_USAGE(.BOTH.,#509792); +#509792 = SURFACE_SIDE_STYLE('',(#509793)); +#509793 = SURFACE_STYLE_FILL_AREA(#509794); +#509794 = FILL_AREA_STYLE('',(#509795)); +#509795 = FILL_AREA_STYLE_COLOUR('',#509312); +#509796 = OVER_RIDING_STYLED_ITEM('overriding color',(#509797),#93334, + #506656); +#509797 = PRESENTATION_STYLE_ASSIGNMENT((#509798)); +#509798 = SURFACE_STYLE_USAGE(.BOTH.,#509799); +#509799 = SURFACE_SIDE_STYLE('',(#509800)); +#509800 = SURFACE_STYLE_FILL_AREA(#509801); +#509801 = FILL_AREA_STYLE('',(#509802)); +#509802 = FILL_AREA_STYLE_COLOUR('',#509312); +#509803 = OVER_RIDING_STYLED_ITEM('overriding color',(#509804),#93346, + #506656); +#509804 = PRESENTATION_STYLE_ASSIGNMENT((#509805)); +#509805 = SURFACE_STYLE_USAGE(.BOTH.,#509806); +#509806 = SURFACE_SIDE_STYLE('',(#509807)); +#509807 = SURFACE_STYLE_FILL_AREA(#509808); +#509808 = FILL_AREA_STYLE('',(#509809)); +#509809 = FILL_AREA_STYLE_COLOUR('',#509312); +#509810 = OVER_RIDING_STYLED_ITEM('overriding color',(#509811),#93358, + #506656); +#509811 = PRESENTATION_STYLE_ASSIGNMENT((#509812)); +#509812 = SURFACE_STYLE_USAGE(.BOTH.,#509813); +#509813 = SURFACE_SIDE_STYLE('',(#509814)); +#509814 = SURFACE_STYLE_FILL_AREA(#509815); +#509815 = FILL_AREA_STYLE('',(#509816)); +#509816 = FILL_AREA_STYLE_COLOUR('',#509312); +#509817 = OVER_RIDING_STYLED_ITEM('overriding color',(#509818),#93389, + #506656); +#509818 = PRESENTATION_STYLE_ASSIGNMENT((#509819)); +#509819 = SURFACE_STYLE_USAGE(.BOTH.,#509820); +#509820 = SURFACE_SIDE_STYLE('',(#509821)); +#509821 = SURFACE_STYLE_FILL_AREA(#509822); +#509822 = FILL_AREA_STYLE('',(#509823)); +#509823 = FILL_AREA_STYLE_COLOUR('',#509312); +#509824 = OVER_RIDING_STYLED_ITEM('overriding color',(#509825),#93413, + #506656); +#509825 = PRESENTATION_STYLE_ASSIGNMENT((#509826)); +#509826 = SURFACE_STYLE_USAGE(.BOTH.,#509827); +#509827 = SURFACE_SIDE_STYLE('',(#509828)); +#509828 = SURFACE_STYLE_FILL_AREA(#509829); +#509829 = FILL_AREA_STYLE('',(#509830)); +#509830 = FILL_AREA_STYLE_COLOUR('',#509312); +#509831 = OVER_RIDING_STYLED_ITEM('overriding color',(#509832),#93437, + #506656); +#509832 = PRESENTATION_STYLE_ASSIGNMENT((#509833)); +#509833 = SURFACE_STYLE_USAGE(.BOTH.,#509834); +#509834 = SURFACE_SIDE_STYLE('',(#509835)); +#509835 = SURFACE_STYLE_FILL_AREA(#509836); +#509836 = FILL_AREA_STYLE('',(#509837)); +#509837 = FILL_AREA_STYLE_COLOUR('',#509312); +#509838 = OVER_RIDING_STYLED_ITEM('overriding color',(#509839),#93454, + #506656); +#509839 = PRESENTATION_STYLE_ASSIGNMENT((#509840)); +#509840 = SURFACE_STYLE_USAGE(.BOTH.,#509841); +#509841 = SURFACE_SIDE_STYLE('',(#509842)); +#509842 = SURFACE_STYLE_FILL_AREA(#509843); +#509843 = FILL_AREA_STYLE('',(#509844)); +#509844 = FILL_AREA_STYLE_COLOUR('',#509312); +#509845 = OVER_RIDING_STYLED_ITEM('overriding color',(#509846),#93466, + #506656); +#509846 = PRESENTATION_STYLE_ASSIGNMENT((#509847)); +#509847 = SURFACE_STYLE_USAGE(.BOTH.,#509848); +#509848 = SURFACE_SIDE_STYLE('',(#509849)); +#509849 = SURFACE_STYLE_FILL_AREA(#509850); +#509850 = FILL_AREA_STYLE('',(#509851)); +#509851 = FILL_AREA_STYLE_COLOUR('',#509312); +#509852 = OVER_RIDING_STYLED_ITEM('overriding color',(#509853),#93497, + #506656); +#509853 = PRESENTATION_STYLE_ASSIGNMENT((#509854)); +#509854 = SURFACE_STYLE_USAGE(.BOTH.,#509855); +#509855 = SURFACE_SIDE_STYLE('',(#509856)); +#509856 = SURFACE_STYLE_FILL_AREA(#509857); +#509857 = FILL_AREA_STYLE('',(#509858)); +#509858 = FILL_AREA_STYLE_COLOUR('',#509312); +#509859 = OVER_RIDING_STYLED_ITEM('overriding color',(#509860),#93521, + #506656); +#509860 = PRESENTATION_STYLE_ASSIGNMENT((#509861)); +#509861 = SURFACE_STYLE_USAGE(.BOTH.,#509862); +#509862 = SURFACE_SIDE_STYLE('',(#509863)); +#509863 = SURFACE_STYLE_FILL_AREA(#509864); +#509864 = FILL_AREA_STYLE('',(#509865)); +#509865 = FILL_AREA_STYLE_COLOUR('',#509312); +#509866 = OVER_RIDING_STYLED_ITEM('overriding color',(#509867),#93545, + #506656); +#509867 = PRESENTATION_STYLE_ASSIGNMENT((#509868)); +#509868 = SURFACE_STYLE_USAGE(.BOTH.,#509869); +#509869 = SURFACE_SIDE_STYLE('',(#509870)); +#509870 = SURFACE_STYLE_FILL_AREA(#509871); +#509871 = FILL_AREA_STYLE('',(#509872)); +#509872 = FILL_AREA_STYLE_COLOUR('',#509312); +#509873 = OVER_RIDING_STYLED_ITEM('overriding color',(#509874),#93562, + #506656); +#509874 = PRESENTATION_STYLE_ASSIGNMENT((#509875)); +#509875 = SURFACE_STYLE_USAGE(.BOTH.,#509876); +#509876 = SURFACE_SIDE_STYLE('',(#509877)); +#509877 = SURFACE_STYLE_FILL_AREA(#509878); +#509878 = FILL_AREA_STYLE('',(#509879)); +#509879 = FILL_AREA_STYLE_COLOUR('',#509312); +#509880 = OVER_RIDING_STYLED_ITEM('overriding color',(#509881),#93574, + #506656); +#509881 = PRESENTATION_STYLE_ASSIGNMENT((#509882)); +#509882 = SURFACE_STYLE_USAGE(.BOTH.,#509883); +#509883 = SURFACE_SIDE_STYLE('',(#509884)); +#509884 = SURFACE_STYLE_FILL_AREA(#509885); +#509885 = FILL_AREA_STYLE('',(#509886)); +#509886 = FILL_AREA_STYLE_COLOUR('',#509312); +#509887 = OVER_RIDING_STYLED_ITEM('overriding color',(#509888),#93605, + #506656); +#509888 = PRESENTATION_STYLE_ASSIGNMENT((#509889)); +#509889 = SURFACE_STYLE_USAGE(.BOTH.,#509890); +#509890 = SURFACE_SIDE_STYLE('',(#509891)); +#509891 = SURFACE_STYLE_FILL_AREA(#509892); +#509892 = FILL_AREA_STYLE('',(#509893)); +#509893 = FILL_AREA_STYLE_COLOUR('',#509312); +#509894 = OVER_RIDING_STYLED_ITEM('overriding color',(#509895),#93629, + #506656); +#509895 = PRESENTATION_STYLE_ASSIGNMENT((#509896)); +#509896 = SURFACE_STYLE_USAGE(.BOTH.,#509897); +#509897 = SURFACE_SIDE_STYLE('',(#509898)); +#509898 = SURFACE_STYLE_FILL_AREA(#509899); +#509899 = FILL_AREA_STYLE('',(#509900)); +#509900 = FILL_AREA_STYLE_COLOUR('',#509312); +#509901 = OVER_RIDING_STYLED_ITEM('overriding color',(#509902),#93653, + #506656); +#509902 = PRESENTATION_STYLE_ASSIGNMENT((#509903)); +#509903 = SURFACE_STYLE_USAGE(.BOTH.,#509904); +#509904 = SURFACE_SIDE_STYLE('',(#509905)); +#509905 = SURFACE_STYLE_FILL_AREA(#509906); +#509906 = FILL_AREA_STYLE('',(#509907)); +#509907 = FILL_AREA_STYLE_COLOUR('',#509312); +#509908 = OVER_RIDING_STYLED_ITEM('overriding color',(#509909),#93670, + #506656); +#509909 = PRESENTATION_STYLE_ASSIGNMENT((#509910)); +#509910 = SURFACE_STYLE_USAGE(.BOTH.,#509911); +#509911 = SURFACE_SIDE_STYLE('',(#509912)); +#509912 = SURFACE_STYLE_FILL_AREA(#509913); +#509913 = FILL_AREA_STYLE('',(#509914)); +#509914 = FILL_AREA_STYLE_COLOUR('',#509312); +#509915 = OVER_RIDING_STYLED_ITEM('overriding color',(#509916),#93682, + #506656); +#509916 = PRESENTATION_STYLE_ASSIGNMENT((#509917)); +#509917 = SURFACE_STYLE_USAGE(.BOTH.,#509918); +#509918 = SURFACE_SIDE_STYLE('',(#509919)); +#509919 = SURFACE_STYLE_FILL_AREA(#509920); +#509920 = FILL_AREA_STYLE('',(#509921)); +#509921 = FILL_AREA_STYLE_COLOUR('',#509312); +#509922 = OVER_RIDING_STYLED_ITEM('overriding color',(#509923),#93713, + #506656); +#509923 = PRESENTATION_STYLE_ASSIGNMENT((#509924)); +#509924 = SURFACE_STYLE_USAGE(.BOTH.,#509925); +#509925 = SURFACE_SIDE_STYLE('',(#509926)); +#509926 = SURFACE_STYLE_FILL_AREA(#509927); +#509927 = FILL_AREA_STYLE('',(#509928)); +#509928 = FILL_AREA_STYLE_COLOUR('',#509312); +#509929 = OVER_RIDING_STYLED_ITEM('overriding color',(#509930),#93737, + #506656); +#509930 = PRESENTATION_STYLE_ASSIGNMENT((#509931)); +#509931 = SURFACE_STYLE_USAGE(.BOTH.,#509932); +#509932 = SURFACE_SIDE_STYLE('',(#509933)); +#509933 = SURFACE_STYLE_FILL_AREA(#509934); +#509934 = FILL_AREA_STYLE('',(#509935)); +#509935 = FILL_AREA_STYLE_COLOUR('',#509312); +#509936 = OVER_RIDING_STYLED_ITEM('overriding color',(#509937),#93761, + #506656); +#509937 = PRESENTATION_STYLE_ASSIGNMENT((#509938)); +#509938 = SURFACE_STYLE_USAGE(.BOTH.,#509939); +#509939 = SURFACE_SIDE_STYLE('',(#509940)); +#509940 = SURFACE_STYLE_FILL_AREA(#509941); +#509941 = FILL_AREA_STYLE('',(#509942)); +#509942 = FILL_AREA_STYLE_COLOUR('',#509312); +#509943 = OVER_RIDING_STYLED_ITEM('overriding color',(#509944),#93778, + #506656); +#509944 = PRESENTATION_STYLE_ASSIGNMENT((#509945)); +#509945 = SURFACE_STYLE_USAGE(.BOTH.,#509946); +#509946 = SURFACE_SIDE_STYLE('',(#509947)); +#509947 = SURFACE_STYLE_FILL_AREA(#509948); +#509948 = FILL_AREA_STYLE('',(#509949)); +#509949 = FILL_AREA_STYLE_COLOUR('',#509312); +#509950 = OVER_RIDING_STYLED_ITEM('overriding color',(#509951),#93790, + #506656); +#509951 = PRESENTATION_STYLE_ASSIGNMENT((#509952)); +#509952 = SURFACE_STYLE_USAGE(.BOTH.,#509953); +#509953 = SURFACE_SIDE_STYLE('',(#509954)); +#509954 = SURFACE_STYLE_FILL_AREA(#509955); +#509955 = FILL_AREA_STYLE('',(#509956)); +#509956 = FILL_AREA_STYLE_COLOUR('',#509312); +#509957 = OVER_RIDING_STYLED_ITEM('overriding color',(#509958),#93821, + #506656); +#509958 = PRESENTATION_STYLE_ASSIGNMENT((#509959)); +#509959 = SURFACE_STYLE_USAGE(.BOTH.,#509960); +#509960 = SURFACE_SIDE_STYLE('',(#509961)); +#509961 = SURFACE_STYLE_FILL_AREA(#509962); +#509962 = FILL_AREA_STYLE('',(#509963)); +#509963 = FILL_AREA_STYLE_COLOUR('',#509312); +#509964 = OVER_RIDING_STYLED_ITEM('overriding color',(#509965),#93845, + #506656); +#509965 = PRESENTATION_STYLE_ASSIGNMENT((#509966)); +#509966 = SURFACE_STYLE_USAGE(.BOTH.,#509967); +#509967 = SURFACE_SIDE_STYLE('',(#509968)); +#509968 = SURFACE_STYLE_FILL_AREA(#509969); +#509969 = FILL_AREA_STYLE('',(#509970)); +#509970 = FILL_AREA_STYLE_COLOUR('',#509312); +#509971 = OVER_RIDING_STYLED_ITEM('overriding color',(#509972),#93869, + #506656); +#509972 = PRESENTATION_STYLE_ASSIGNMENT((#509973)); +#509973 = SURFACE_STYLE_USAGE(.BOTH.,#509974); +#509974 = SURFACE_SIDE_STYLE('',(#509975)); +#509975 = SURFACE_STYLE_FILL_AREA(#509976); +#509976 = FILL_AREA_STYLE('',(#509977)); +#509977 = FILL_AREA_STYLE_COLOUR('',#509312); +#509978 = OVER_RIDING_STYLED_ITEM('overriding color',(#509979),#93886, + #506656); +#509979 = PRESENTATION_STYLE_ASSIGNMENT((#509980)); +#509980 = SURFACE_STYLE_USAGE(.BOTH.,#509981); +#509981 = SURFACE_SIDE_STYLE('',(#509982)); +#509982 = SURFACE_STYLE_FILL_AREA(#509983); +#509983 = FILL_AREA_STYLE('',(#509984)); +#509984 = FILL_AREA_STYLE_COLOUR('',#509312); +#509985 = OVER_RIDING_STYLED_ITEM('overriding color',(#509986),#93898, + #506656); +#509986 = PRESENTATION_STYLE_ASSIGNMENT((#509987)); +#509987 = SURFACE_STYLE_USAGE(.BOTH.,#509988); +#509988 = SURFACE_SIDE_STYLE('',(#509989)); +#509989 = SURFACE_STYLE_FILL_AREA(#509990); +#509990 = FILL_AREA_STYLE('',(#509991)); +#509991 = FILL_AREA_STYLE_COLOUR('',#509312); +#509992 = OVER_RIDING_STYLED_ITEM('overriding color',(#509993),#93929, + #506656); +#509993 = PRESENTATION_STYLE_ASSIGNMENT((#509994)); +#509994 = SURFACE_STYLE_USAGE(.BOTH.,#509995); +#509995 = SURFACE_SIDE_STYLE('',(#509996)); +#509996 = SURFACE_STYLE_FILL_AREA(#509997); +#509997 = FILL_AREA_STYLE('',(#509998)); +#509998 = FILL_AREA_STYLE_COLOUR('',#509312); +#509999 = OVER_RIDING_STYLED_ITEM('overriding color',(#510000),#93953, + #506656); +#510000 = PRESENTATION_STYLE_ASSIGNMENT((#510001)); +#510001 = SURFACE_STYLE_USAGE(.BOTH.,#510002); +#510002 = SURFACE_SIDE_STYLE('',(#510003)); +#510003 = SURFACE_STYLE_FILL_AREA(#510004); +#510004 = FILL_AREA_STYLE('',(#510005)); +#510005 = FILL_AREA_STYLE_COLOUR('',#509312); +#510006 = OVER_RIDING_STYLED_ITEM('overriding color',(#510007),#93977, + #506656); +#510007 = PRESENTATION_STYLE_ASSIGNMENT((#510008)); +#510008 = SURFACE_STYLE_USAGE(.BOTH.,#510009); +#510009 = SURFACE_SIDE_STYLE('',(#510010)); +#510010 = SURFACE_STYLE_FILL_AREA(#510011); +#510011 = FILL_AREA_STYLE('',(#510012)); +#510012 = FILL_AREA_STYLE_COLOUR('',#509312); +#510013 = OVER_RIDING_STYLED_ITEM('overriding color',(#510014),#93994, + #506656); +#510014 = PRESENTATION_STYLE_ASSIGNMENT((#510015)); +#510015 = SURFACE_STYLE_USAGE(.BOTH.,#510016); +#510016 = SURFACE_SIDE_STYLE('',(#510017)); +#510017 = SURFACE_STYLE_FILL_AREA(#510018); +#510018 = FILL_AREA_STYLE('',(#510019)); +#510019 = FILL_AREA_STYLE_COLOUR('',#509312); +#510020 = OVER_RIDING_STYLED_ITEM('overriding color',(#510021),#94006, + #506656); +#510021 = PRESENTATION_STYLE_ASSIGNMENT((#510022)); +#510022 = SURFACE_STYLE_USAGE(.BOTH.,#510023); +#510023 = SURFACE_SIDE_STYLE('',(#510024)); +#510024 = SURFACE_STYLE_FILL_AREA(#510025); +#510025 = FILL_AREA_STYLE('',(#510026)); +#510026 = FILL_AREA_STYLE_COLOUR('',#509312); +#510027 = OVER_RIDING_STYLED_ITEM('overriding color',(#510028),#94037, + #506656); +#510028 = PRESENTATION_STYLE_ASSIGNMENT((#510029)); +#510029 = SURFACE_STYLE_USAGE(.BOTH.,#510030); +#510030 = SURFACE_SIDE_STYLE('',(#510031)); +#510031 = SURFACE_STYLE_FILL_AREA(#510032); +#510032 = FILL_AREA_STYLE('',(#510033)); +#510033 = FILL_AREA_STYLE_COLOUR('',#509312); +#510034 = OVER_RIDING_STYLED_ITEM('overriding color',(#510035),#94061, + #506656); +#510035 = PRESENTATION_STYLE_ASSIGNMENT((#510036)); +#510036 = SURFACE_STYLE_USAGE(.BOTH.,#510037); +#510037 = SURFACE_SIDE_STYLE('',(#510038)); +#510038 = SURFACE_STYLE_FILL_AREA(#510039); +#510039 = FILL_AREA_STYLE('',(#510040)); +#510040 = FILL_AREA_STYLE_COLOUR('',#509312); +#510041 = OVER_RIDING_STYLED_ITEM('overriding color',(#510042),#94085, + #506656); +#510042 = PRESENTATION_STYLE_ASSIGNMENT((#510043)); +#510043 = SURFACE_STYLE_USAGE(.BOTH.,#510044); +#510044 = SURFACE_SIDE_STYLE('',(#510045)); +#510045 = SURFACE_STYLE_FILL_AREA(#510046); +#510046 = FILL_AREA_STYLE('',(#510047)); +#510047 = FILL_AREA_STYLE_COLOUR('',#509312); +#510048 = OVER_RIDING_STYLED_ITEM('overriding color',(#510049),#94102, + #506656); +#510049 = PRESENTATION_STYLE_ASSIGNMENT((#510050)); +#510050 = SURFACE_STYLE_USAGE(.BOTH.,#510051); +#510051 = SURFACE_SIDE_STYLE('',(#510052)); +#510052 = SURFACE_STYLE_FILL_AREA(#510053); +#510053 = FILL_AREA_STYLE('',(#510054)); +#510054 = FILL_AREA_STYLE_COLOUR('',#509312); +#510055 = OVER_RIDING_STYLED_ITEM('overriding color',(#510056),#94114, + #506656); +#510056 = PRESENTATION_STYLE_ASSIGNMENT((#510057)); +#510057 = SURFACE_STYLE_USAGE(.BOTH.,#510058); +#510058 = SURFACE_SIDE_STYLE('',(#510059)); +#510059 = SURFACE_STYLE_FILL_AREA(#510060); +#510060 = FILL_AREA_STYLE('',(#510061)); +#510061 = FILL_AREA_STYLE_COLOUR('',#509312); +#510062 = OVER_RIDING_STYLED_ITEM('overriding color',(#510063),#94145, + #506656); +#510063 = PRESENTATION_STYLE_ASSIGNMENT((#510064)); +#510064 = SURFACE_STYLE_USAGE(.BOTH.,#510065); +#510065 = SURFACE_SIDE_STYLE('',(#510066)); +#510066 = SURFACE_STYLE_FILL_AREA(#510067); +#510067 = FILL_AREA_STYLE('',(#510068)); +#510068 = FILL_AREA_STYLE_COLOUR('',#509312); +#510069 = OVER_RIDING_STYLED_ITEM('overriding color',(#510070),#94169, + #506656); +#510070 = PRESENTATION_STYLE_ASSIGNMENT((#510071)); +#510071 = SURFACE_STYLE_USAGE(.BOTH.,#510072); +#510072 = SURFACE_SIDE_STYLE('',(#510073)); +#510073 = SURFACE_STYLE_FILL_AREA(#510074); +#510074 = FILL_AREA_STYLE('',(#510075)); +#510075 = FILL_AREA_STYLE_COLOUR('',#509312); +#510076 = OVER_RIDING_STYLED_ITEM('overriding color',(#510077),#94193, + #506656); +#510077 = PRESENTATION_STYLE_ASSIGNMENT((#510078)); +#510078 = SURFACE_STYLE_USAGE(.BOTH.,#510079); +#510079 = SURFACE_SIDE_STYLE('',(#510080)); +#510080 = SURFACE_STYLE_FILL_AREA(#510081); +#510081 = FILL_AREA_STYLE('',(#510082)); +#510082 = FILL_AREA_STYLE_COLOUR('',#509312); +#510083 = OVER_RIDING_STYLED_ITEM('overriding color',(#510084),#94210, + #506656); +#510084 = PRESENTATION_STYLE_ASSIGNMENT((#510085)); +#510085 = SURFACE_STYLE_USAGE(.BOTH.,#510086); +#510086 = SURFACE_SIDE_STYLE('',(#510087)); +#510087 = SURFACE_STYLE_FILL_AREA(#510088); +#510088 = FILL_AREA_STYLE('',(#510089)); +#510089 = FILL_AREA_STYLE_COLOUR('',#509312); +#510090 = OVER_RIDING_STYLED_ITEM('overriding color',(#510091),#94222, + #506656); +#510091 = PRESENTATION_STYLE_ASSIGNMENT((#510092)); +#510092 = SURFACE_STYLE_USAGE(.BOTH.,#510093); +#510093 = SURFACE_SIDE_STYLE('',(#510094)); +#510094 = SURFACE_STYLE_FILL_AREA(#510095); +#510095 = FILL_AREA_STYLE('',(#510096)); +#510096 = FILL_AREA_STYLE_COLOUR('',#509312); +#510097 = OVER_RIDING_STYLED_ITEM('overriding color',(#510098),#94253, + #506656); +#510098 = PRESENTATION_STYLE_ASSIGNMENT((#510099)); +#510099 = SURFACE_STYLE_USAGE(.BOTH.,#510100); +#510100 = SURFACE_SIDE_STYLE('',(#510101)); +#510101 = SURFACE_STYLE_FILL_AREA(#510102); +#510102 = FILL_AREA_STYLE('',(#510103)); +#510103 = FILL_AREA_STYLE_COLOUR('',#509312); +#510104 = OVER_RIDING_STYLED_ITEM('overriding color',(#510105),#94277, + #506656); +#510105 = PRESENTATION_STYLE_ASSIGNMENT((#510106)); +#510106 = SURFACE_STYLE_USAGE(.BOTH.,#510107); +#510107 = SURFACE_SIDE_STYLE('',(#510108)); +#510108 = SURFACE_STYLE_FILL_AREA(#510109); +#510109 = FILL_AREA_STYLE('',(#510110)); +#510110 = FILL_AREA_STYLE_COLOUR('',#509312); +#510111 = OVER_RIDING_STYLED_ITEM('overriding color',(#510112),#94301, + #506656); +#510112 = PRESENTATION_STYLE_ASSIGNMENT((#510113)); +#510113 = SURFACE_STYLE_USAGE(.BOTH.,#510114); +#510114 = SURFACE_SIDE_STYLE('',(#510115)); +#510115 = SURFACE_STYLE_FILL_AREA(#510116); +#510116 = FILL_AREA_STYLE('',(#510117)); +#510117 = FILL_AREA_STYLE_COLOUR('',#509312); +#510118 = OVER_RIDING_STYLED_ITEM('overriding color',(#510119),#94318, + #506656); +#510119 = PRESENTATION_STYLE_ASSIGNMENT((#510120)); +#510120 = SURFACE_STYLE_USAGE(.BOTH.,#510121); +#510121 = SURFACE_SIDE_STYLE('',(#510122)); +#510122 = SURFACE_STYLE_FILL_AREA(#510123); +#510123 = FILL_AREA_STYLE('',(#510124)); +#510124 = FILL_AREA_STYLE_COLOUR('',#509312); +#510125 = OVER_RIDING_STYLED_ITEM('overriding color',(#510126),#94330, + #506656); +#510126 = PRESENTATION_STYLE_ASSIGNMENT((#510127)); +#510127 = SURFACE_STYLE_USAGE(.BOTH.,#510128); +#510128 = SURFACE_SIDE_STYLE('',(#510129)); +#510129 = SURFACE_STYLE_FILL_AREA(#510130); +#510130 = FILL_AREA_STYLE('',(#510131)); +#510131 = FILL_AREA_STYLE_COLOUR('',#509312); +#510132 = OVER_RIDING_STYLED_ITEM('overriding color',(#510133),#94361, + #506656); +#510133 = PRESENTATION_STYLE_ASSIGNMENT((#510134)); +#510134 = SURFACE_STYLE_USAGE(.BOTH.,#510135); +#510135 = SURFACE_SIDE_STYLE('',(#510136)); +#510136 = SURFACE_STYLE_FILL_AREA(#510137); +#510137 = FILL_AREA_STYLE('',(#510138)); +#510138 = FILL_AREA_STYLE_COLOUR('',#509312); +#510139 = OVER_RIDING_STYLED_ITEM('overriding color',(#510140),#94385, + #506656); +#510140 = PRESENTATION_STYLE_ASSIGNMENT((#510141)); +#510141 = SURFACE_STYLE_USAGE(.BOTH.,#510142); +#510142 = SURFACE_SIDE_STYLE('',(#510143)); +#510143 = SURFACE_STYLE_FILL_AREA(#510144); +#510144 = FILL_AREA_STYLE('',(#510145)); +#510145 = FILL_AREA_STYLE_COLOUR('',#509312); +#510146 = OVER_RIDING_STYLED_ITEM('overriding color',(#510147),#94409, + #506656); +#510147 = PRESENTATION_STYLE_ASSIGNMENT((#510148)); +#510148 = SURFACE_STYLE_USAGE(.BOTH.,#510149); +#510149 = SURFACE_SIDE_STYLE('',(#510150)); +#510150 = SURFACE_STYLE_FILL_AREA(#510151); +#510151 = FILL_AREA_STYLE('',(#510152)); +#510152 = FILL_AREA_STYLE_COLOUR('',#509312); +#510153 = OVER_RIDING_STYLED_ITEM('overriding color',(#510154),#94426, + #506656); +#510154 = PRESENTATION_STYLE_ASSIGNMENT((#510155)); +#510155 = SURFACE_STYLE_USAGE(.BOTH.,#510156); +#510156 = SURFACE_SIDE_STYLE('',(#510157)); +#510157 = SURFACE_STYLE_FILL_AREA(#510158); +#510158 = FILL_AREA_STYLE('',(#510159)); +#510159 = FILL_AREA_STYLE_COLOUR('',#509312); +#510160 = OVER_RIDING_STYLED_ITEM('overriding color',(#510161),#94438, + #506656); +#510161 = PRESENTATION_STYLE_ASSIGNMENT((#510162)); +#510162 = SURFACE_STYLE_USAGE(.BOTH.,#510163); +#510163 = SURFACE_SIDE_STYLE('',(#510164)); +#510164 = SURFACE_STYLE_FILL_AREA(#510165); +#510165 = FILL_AREA_STYLE('',(#510166)); +#510166 = FILL_AREA_STYLE_COLOUR('',#509312); +#510167 = OVER_RIDING_STYLED_ITEM('overriding color',(#510168),#94469, + #506656); +#510168 = PRESENTATION_STYLE_ASSIGNMENT((#510169)); +#510169 = SURFACE_STYLE_USAGE(.BOTH.,#510170); +#510170 = SURFACE_SIDE_STYLE('',(#510171)); +#510171 = SURFACE_STYLE_FILL_AREA(#510172); +#510172 = FILL_AREA_STYLE('',(#510173)); +#510173 = FILL_AREA_STYLE_COLOUR('',#509312); +#510174 = OVER_RIDING_STYLED_ITEM('overriding color',(#510175),#94493, + #506656); +#510175 = PRESENTATION_STYLE_ASSIGNMENT((#510176)); +#510176 = SURFACE_STYLE_USAGE(.BOTH.,#510177); +#510177 = SURFACE_SIDE_STYLE('',(#510178)); +#510178 = SURFACE_STYLE_FILL_AREA(#510179); +#510179 = FILL_AREA_STYLE('',(#510180)); +#510180 = FILL_AREA_STYLE_COLOUR('',#509312); +#510181 = OVER_RIDING_STYLED_ITEM('overriding color',(#510182),#94517, + #506656); +#510182 = PRESENTATION_STYLE_ASSIGNMENT((#510183)); +#510183 = SURFACE_STYLE_USAGE(.BOTH.,#510184); +#510184 = SURFACE_SIDE_STYLE('',(#510185)); +#510185 = SURFACE_STYLE_FILL_AREA(#510186); +#510186 = FILL_AREA_STYLE('',(#510187)); +#510187 = FILL_AREA_STYLE_COLOUR('',#509312); +#510188 = OVER_RIDING_STYLED_ITEM('overriding color',(#510189),#94534, + #506656); +#510189 = PRESENTATION_STYLE_ASSIGNMENT((#510190)); +#510190 = SURFACE_STYLE_USAGE(.BOTH.,#510191); +#510191 = SURFACE_SIDE_STYLE('',(#510192)); +#510192 = SURFACE_STYLE_FILL_AREA(#510193); +#510193 = FILL_AREA_STYLE('',(#510194)); +#510194 = FILL_AREA_STYLE_COLOUR('',#509312); +#510195 = OVER_RIDING_STYLED_ITEM('overriding color',(#510196),#94546, + #506656); +#510196 = PRESENTATION_STYLE_ASSIGNMENT((#510197)); +#510197 = SURFACE_STYLE_USAGE(.BOTH.,#510198); +#510198 = SURFACE_SIDE_STYLE('',(#510199)); +#510199 = SURFACE_STYLE_FILL_AREA(#510200); +#510200 = FILL_AREA_STYLE('',(#510201)); +#510201 = FILL_AREA_STYLE_COLOUR('',#509312); +#510202 = OVER_RIDING_STYLED_ITEM('overriding color',(#510203),#94577, + #506656); +#510203 = PRESENTATION_STYLE_ASSIGNMENT((#510204)); +#510204 = SURFACE_STYLE_USAGE(.BOTH.,#510205); +#510205 = SURFACE_SIDE_STYLE('',(#510206)); +#510206 = SURFACE_STYLE_FILL_AREA(#510207); +#510207 = FILL_AREA_STYLE('',(#510208)); +#510208 = FILL_AREA_STYLE_COLOUR('',#509312); +#510209 = OVER_RIDING_STYLED_ITEM('overriding color',(#510210),#94601, + #506656); +#510210 = PRESENTATION_STYLE_ASSIGNMENT((#510211)); +#510211 = SURFACE_STYLE_USAGE(.BOTH.,#510212); +#510212 = SURFACE_SIDE_STYLE('',(#510213)); +#510213 = SURFACE_STYLE_FILL_AREA(#510214); +#510214 = FILL_AREA_STYLE('',(#510215)); +#510215 = FILL_AREA_STYLE_COLOUR('',#509312); +#510216 = OVER_RIDING_STYLED_ITEM('overriding color',(#510217),#94625, + #506656); +#510217 = PRESENTATION_STYLE_ASSIGNMENT((#510218)); +#510218 = SURFACE_STYLE_USAGE(.BOTH.,#510219); +#510219 = SURFACE_SIDE_STYLE('',(#510220)); +#510220 = SURFACE_STYLE_FILL_AREA(#510221); +#510221 = FILL_AREA_STYLE('',(#510222)); +#510222 = FILL_AREA_STYLE_COLOUR('',#509312); +#510223 = OVER_RIDING_STYLED_ITEM('overriding color',(#510224),#94642, + #506656); +#510224 = PRESENTATION_STYLE_ASSIGNMENT((#510225)); +#510225 = SURFACE_STYLE_USAGE(.BOTH.,#510226); +#510226 = SURFACE_SIDE_STYLE('',(#510227)); +#510227 = SURFACE_STYLE_FILL_AREA(#510228); +#510228 = FILL_AREA_STYLE('',(#510229)); +#510229 = FILL_AREA_STYLE_COLOUR('',#509312); +#510230 = OVER_RIDING_STYLED_ITEM('overriding color',(#510231),#94654, + #506656); +#510231 = PRESENTATION_STYLE_ASSIGNMENT((#510232)); +#510232 = SURFACE_STYLE_USAGE(.BOTH.,#510233); +#510233 = SURFACE_SIDE_STYLE('',(#510234)); +#510234 = SURFACE_STYLE_FILL_AREA(#510235); +#510235 = FILL_AREA_STYLE('',(#510236)); +#510236 = FILL_AREA_STYLE_COLOUR('',#509312); +#510237 = OVER_RIDING_STYLED_ITEM('overriding color',(#510238),#94685, + #506656); +#510238 = PRESENTATION_STYLE_ASSIGNMENT((#510239)); +#510239 = SURFACE_STYLE_USAGE(.BOTH.,#510240); +#510240 = SURFACE_SIDE_STYLE('',(#510241)); +#510241 = SURFACE_STYLE_FILL_AREA(#510242); +#510242 = FILL_AREA_STYLE('',(#510243)); +#510243 = FILL_AREA_STYLE_COLOUR('',#509312); +#510244 = OVER_RIDING_STYLED_ITEM('overriding color',(#510245),#94709, + #506656); +#510245 = PRESENTATION_STYLE_ASSIGNMENT((#510246)); +#510246 = SURFACE_STYLE_USAGE(.BOTH.,#510247); +#510247 = SURFACE_SIDE_STYLE('',(#510248)); +#510248 = SURFACE_STYLE_FILL_AREA(#510249); +#510249 = FILL_AREA_STYLE('',(#510250)); +#510250 = FILL_AREA_STYLE_COLOUR('',#509312); +#510251 = OVER_RIDING_STYLED_ITEM('overriding color',(#510252),#94733, + #506656); +#510252 = PRESENTATION_STYLE_ASSIGNMENT((#510253)); +#510253 = SURFACE_STYLE_USAGE(.BOTH.,#510254); +#510254 = SURFACE_SIDE_STYLE('',(#510255)); +#510255 = SURFACE_STYLE_FILL_AREA(#510256); +#510256 = FILL_AREA_STYLE('',(#510257)); +#510257 = FILL_AREA_STYLE_COLOUR('',#509312); +#510258 = OVER_RIDING_STYLED_ITEM('overriding color',(#510259),#94750, + #506656); +#510259 = PRESENTATION_STYLE_ASSIGNMENT((#510260)); +#510260 = SURFACE_STYLE_USAGE(.BOTH.,#510261); +#510261 = SURFACE_SIDE_STYLE('',(#510262)); +#510262 = SURFACE_STYLE_FILL_AREA(#510263); +#510263 = FILL_AREA_STYLE('',(#510264)); +#510264 = FILL_AREA_STYLE_COLOUR('',#509312); +#510265 = OVER_RIDING_STYLED_ITEM('overriding color',(#510266),#94762, + #506656); +#510266 = PRESENTATION_STYLE_ASSIGNMENT((#510267)); +#510267 = SURFACE_STYLE_USAGE(.BOTH.,#510268); +#510268 = SURFACE_SIDE_STYLE('',(#510269)); +#510269 = SURFACE_STYLE_FILL_AREA(#510270); +#510270 = FILL_AREA_STYLE('',(#510271)); +#510271 = FILL_AREA_STYLE_COLOUR('',#509312); +#510272 = OVER_RIDING_STYLED_ITEM('overriding color',(#510273),#94793, + #506656); +#510273 = PRESENTATION_STYLE_ASSIGNMENT((#510274)); +#510274 = SURFACE_STYLE_USAGE(.BOTH.,#510275); +#510275 = SURFACE_SIDE_STYLE('',(#510276)); +#510276 = SURFACE_STYLE_FILL_AREA(#510277); +#510277 = FILL_AREA_STYLE('',(#510278)); +#510278 = FILL_AREA_STYLE_COLOUR('',#509312); +#510279 = OVER_RIDING_STYLED_ITEM('overriding color',(#510280),#94817, + #506656); +#510280 = PRESENTATION_STYLE_ASSIGNMENT((#510281)); +#510281 = SURFACE_STYLE_USAGE(.BOTH.,#510282); +#510282 = SURFACE_SIDE_STYLE('',(#510283)); +#510283 = SURFACE_STYLE_FILL_AREA(#510284); +#510284 = FILL_AREA_STYLE('',(#510285)); +#510285 = FILL_AREA_STYLE_COLOUR('',#509312); +#510286 = OVER_RIDING_STYLED_ITEM('overriding color',(#510287),#94841, + #506656); +#510287 = PRESENTATION_STYLE_ASSIGNMENT((#510288)); +#510288 = SURFACE_STYLE_USAGE(.BOTH.,#510289); +#510289 = SURFACE_SIDE_STYLE('',(#510290)); +#510290 = SURFACE_STYLE_FILL_AREA(#510291); +#510291 = FILL_AREA_STYLE('',(#510292)); +#510292 = FILL_AREA_STYLE_COLOUR('',#509312); +#510293 = OVER_RIDING_STYLED_ITEM('overriding color',(#510294),#94858, + #506656); +#510294 = PRESENTATION_STYLE_ASSIGNMENT((#510295)); +#510295 = SURFACE_STYLE_USAGE(.BOTH.,#510296); +#510296 = SURFACE_SIDE_STYLE('',(#510297)); +#510297 = SURFACE_STYLE_FILL_AREA(#510298); +#510298 = FILL_AREA_STYLE('',(#510299)); +#510299 = FILL_AREA_STYLE_COLOUR('',#509312); +#510300 = OVER_RIDING_STYLED_ITEM('overriding color',(#510301),#94870, + #506656); +#510301 = PRESENTATION_STYLE_ASSIGNMENT((#510302)); +#510302 = SURFACE_STYLE_USAGE(.BOTH.,#510303); +#510303 = SURFACE_SIDE_STYLE('',(#510304)); +#510304 = SURFACE_STYLE_FILL_AREA(#510305); +#510305 = FILL_AREA_STYLE('',(#510306)); +#510306 = FILL_AREA_STYLE_COLOUR('',#509312); +#510307 = OVER_RIDING_STYLED_ITEM('overriding color',(#510308),#94901, + #506656); +#510308 = PRESENTATION_STYLE_ASSIGNMENT((#510309)); +#510309 = SURFACE_STYLE_USAGE(.BOTH.,#510310); +#510310 = SURFACE_SIDE_STYLE('',(#510311)); +#510311 = SURFACE_STYLE_FILL_AREA(#510312); +#510312 = FILL_AREA_STYLE('',(#510313)); +#510313 = FILL_AREA_STYLE_COLOUR('',#509312); +#510314 = OVER_RIDING_STYLED_ITEM('overriding color',(#510315),#94925, + #506656); +#510315 = PRESENTATION_STYLE_ASSIGNMENT((#510316)); +#510316 = SURFACE_STYLE_USAGE(.BOTH.,#510317); +#510317 = SURFACE_SIDE_STYLE('',(#510318)); +#510318 = SURFACE_STYLE_FILL_AREA(#510319); +#510319 = FILL_AREA_STYLE('',(#510320)); +#510320 = FILL_AREA_STYLE_COLOUR('',#509312); +#510321 = OVER_RIDING_STYLED_ITEM('overriding color',(#510322),#94949, + #506656); +#510322 = PRESENTATION_STYLE_ASSIGNMENT((#510323)); +#510323 = SURFACE_STYLE_USAGE(.BOTH.,#510324); +#510324 = SURFACE_SIDE_STYLE('',(#510325)); +#510325 = SURFACE_STYLE_FILL_AREA(#510326); +#510326 = FILL_AREA_STYLE('',(#510327)); +#510327 = FILL_AREA_STYLE_COLOUR('',#509312); +#510328 = OVER_RIDING_STYLED_ITEM('overriding color',(#510329),#94966, + #506656); +#510329 = PRESENTATION_STYLE_ASSIGNMENT((#510330)); +#510330 = SURFACE_STYLE_USAGE(.BOTH.,#510331); +#510331 = SURFACE_SIDE_STYLE('',(#510332)); +#510332 = SURFACE_STYLE_FILL_AREA(#510333); +#510333 = FILL_AREA_STYLE('',(#510334)); +#510334 = FILL_AREA_STYLE_COLOUR('',#509312); +#510335 = OVER_RIDING_STYLED_ITEM('overriding color',(#510336),#94978, + #506656); +#510336 = PRESENTATION_STYLE_ASSIGNMENT((#510337)); +#510337 = SURFACE_STYLE_USAGE(.BOTH.,#510338); +#510338 = SURFACE_SIDE_STYLE('',(#510339)); +#510339 = SURFACE_STYLE_FILL_AREA(#510340); +#510340 = FILL_AREA_STYLE('',(#510341)); +#510341 = FILL_AREA_STYLE_COLOUR('',#509312); +#510342 = OVER_RIDING_STYLED_ITEM('overriding color',(#510343),#95009, + #506656); +#510343 = PRESENTATION_STYLE_ASSIGNMENT((#510344)); +#510344 = SURFACE_STYLE_USAGE(.BOTH.,#510345); +#510345 = SURFACE_SIDE_STYLE('',(#510346)); +#510346 = SURFACE_STYLE_FILL_AREA(#510347); +#510347 = FILL_AREA_STYLE('',(#510348)); +#510348 = FILL_AREA_STYLE_COLOUR('',#509312); +#510349 = OVER_RIDING_STYLED_ITEM('overriding color',(#510350),#95033, + #506656); +#510350 = PRESENTATION_STYLE_ASSIGNMENT((#510351)); +#510351 = SURFACE_STYLE_USAGE(.BOTH.,#510352); +#510352 = SURFACE_SIDE_STYLE('',(#510353)); +#510353 = SURFACE_STYLE_FILL_AREA(#510354); +#510354 = FILL_AREA_STYLE('',(#510355)); +#510355 = FILL_AREA_STYLE_COLOUR('',#509312); +#510356 = OVER_RIDING_STYLED_ITEM('overriding color',(#510357),#95057, + #506656); +#510357 = PRESENTATION_STYLE_ASSIGNMENT((#510358)); +#510358 = SURFACE_STYLE_USAGE(.BOTH.,#510359); +#510359 = SURFACE_SIDE_STYLE('',(#510360)); +#510360 = SURFACE_STYLE_FILL_AREA(#510361); +#510361 = FILL_AREA_STYLE('',(#510362)); +#510362 = FILL_AREA_STYLE_COLOUR('',#509312); +#510363 = OVER_RIDING_STYLED_ITEM('overriding color',(#510364),#95074, + #506656); +#510364 = PRESENTATION_STYLE_ASSIGNMENT((#510365)); +#510365 = SURFACE_STYLE_USAGE(.BOTH.,#510366); +#510366 = SURFACE_SIDE_STYLE('',(#510367)); +#510367 = SURFACE_STYLE_FILL_AREA(#510368); +#510368 = FILL_AREA_STYLE('',(#510369)); +#510369 = FILL_AREA_STYLE_COLOUR('',#509312); +#510370 = OVER_RIDING_STYLED_ITEM('overriding color',(#510371),#95086, + #506656); +#510371 = PRESENTATION_STYLE_ASSIGNMENT((#510372)); +#510372 = SURFACE_STYLE_USAGE(.BOTH.,#510373); +#510373 = SURFACE_SIDE_STYLE('',(#510374)); +#510374 = SURFACE_STYLE_FILL_AREA(#510375); +#510375 = FILL_AREA_STYLE('',(#510376)); +#510376 = FILL_AREA_STYLE_COLOUR('',#510377); +#510377 = COLOUR_RGB('',0.223529416636,0.223529416636,0.223529416636); +#510378 = OVER_RIDING_STYLED_ITEM('overriding color',(#510379),#95117, + #506656); +#510379 = PRESENTATION_STYLE_ASSIGNMENT((#510380)); +#510380 = SURFACE_STYLE_USAGE(.BOTH.,#510381); +#510381 = SURFACE_SIDE_STYLE('',(#510382)); +#510382 = SURFACE_STYLE_FILL_AREA(#510383); +#510383 = FILL_AREA_STYLE('',(#510384)); +#510384 = FILL_AREA_STYLE_COLOUR('',#510377); +#510385 = OVER_RIDING_STYLED_ITEM('overriding color',(#510386),#95141, + #506656); +#510386 = PRESENTATION_STYLE_ASSIGNMENT((#510387)); +#510387 = SURFACE_STYLE_USAGE(.BOTH.,#510388); +#510388 = SURFACE_SIDE_STYLE('',(#510389)); +#510389 = SURFACE_STYLE_FILL_AREA(#510390); +#510390 = FILL_AREA_STYLE('',(#510391)); +#510391 = FILL_AREA_STYLE_COLOUR('',#510377); +#510392 = OVER_RIDING_STYLED_ITEM('overriding color',(#510393),#95165, + #506656); +#510393 = PRESENTATION_STYLE_ASSIGNMENT((#510394)); +#510394 = SURFACE_STYLE_USAGE(.BOTH.,#510395); +#510395 = SURFACE_SIDE_STYLE('',(#510396)); +#510396 = SURFACE_STYLE_FILL_AREA(#510397); +#510397 = FILL_AREA_STYLE('',(#510398)); +#510398 = FILL_AREA_STYLE_COLOUR('',#510377); +#510399 = OVER_RIDING_STYLED_ITEM('overriding color',(#510400),#95189, + #506656); +#510400 = PRESENTATION_STYLE_ASSIGNMENT((#510401)); +#510401 = SURFACE_STYLE_USAGE(.BOTH.,#510402); +#510402 = SURFACE_SIDE_STYLE('',(#510403)); +#510403 = SURFACE_STYLE_FILL_AREA(#510404); +#510404 = FILL_AREA_STYLE('',(#510405)); +#510405 = FILL_AREA_STYLE_COLOUR('',#510377); +#510406 = OVER_RIDING_STYLED_ITEM('overriding color',(#510407),#95213, + #506656); +#510407 = PRESENTATION_STYLE_ASSIGNMENT((#510408)); +#510408 = SURFACE_STYLE_USAGE(.BOTH.,#510409); +#510409 = SURFACE_SIDE_STYLE('',(#510410)); +#510410 = SURFACE_STYLE_FILL_AREA(#510411); +#510411 = FILL_AREA_STYLE('',(#510412)); +#510412 = FILL_AREA_STYLE_COLOUR('',#510377); +#510413 = OVER_RIDING_STYLED_ITEM('overriding color',(#510414),#95237, + #506656); +#510414 = PRESENTATION_STYLE_ASSIGNMENT((#510415)); +#510415 = SURFACE_STYLE_USAGE(.BOTH.,#510416); +#510416 = SURFACE_SIDE_STYLE('',(#510417)); +#510417 = SURFACE_STYLE_FILL_AREA(#510418); +#510418 = FILL_AREA_STYLE('',(#510419)); +#510419 = FILL_AREA_STYLE_COLOUR('',#510377); +#510420 = OVER_RIDING_STYLED_ITEM('overriding color',(#510421),#95261, + #506656); +#510421 = PRESENTATION_STYLE_ASSIGNMENT((#510422)); +#510422 = SURFACE_STYLE_USAGE(.BOTH.,#510423); +#510423 = SURFACE_SIDE_STYLE('',(#510424)); +#510424 = SURFACE_STYLE_FILL_AREA(#510425); +#510425 = FILL_AREA_STYLE('',(#510426)); +#510426 = FILL_AREA_STYLE_COLOUR('',#510377); +#510427 = OVER_RIDING_STYLED_ITEM('overriding color',(#510428),#95278, + #506656); +#510428 = PRESENTATION_STYLE_ASSIGNMENT((#510429)); +#510429 = SURFACE_STYLE_USAGE(.BOTH.,#510430); +#510430 = SURFACE_SIDE_STYLE('',(#510431)); +#510431 = SURFACE_STYLE_FILL_AREA(#510432); +#510432 = FILL_AREA_STYLE('',(#510433)); +#510433 = FILL_AREA_STYLE_COLOUR('',#510377); +#510434 = OVER_RIDING_STYLED_ITEM('overriding color',(#510435),#95352, + #506656); +#510435 = PRESENTATION_STYLE_ASSIGNMENT((#510436)); +#510436 = SURFACE_STYLE_USAGE(.BOTH.,#510437); +#510437 = SURFACE_SIDE_STYLE('',(#510438)); +#510438 = SURFACE_STYLE_FILL_AREA(#510439); +#510439 = FILL_AREA_STYLE('',(#510440)); +#510440 = FILL_AREA_STYLE_COLOUR('',#510377); +#510441 = OVER_RIDING_STYLED_ITEM('overriding color',(#510442),#95383, + #506656); +#510442 = PRESENTATION_STYLE_ASSIGNMENT((#510443)); +#510443 = SURFACE_STYLE_USAGE(.BOTH.,#510444); +#510444 = SURFACE_SIDE_STYLE('',(#510445)); +#510445 = SURFACE_STYLE_FILL_AREA(#510446); +#510446 = FILL_AREA_STYLE('',(#510447)); +#510447 = FILL_AREA_STYLE_COLOUR('',#510377); +#510448 = OVER_RIDING_STYLED_ITEM('overriding color',(#510449),#95407, + #506656); +#510449 = PRESENTATION_STYLE_ASSIGNMENT((#510450)); +#510450 = SURFACE_STYLE_USAGE(.BOTH.,#510451); +#510451 = SURFACE_SIDE_STYLE('',(#510452)); +#510452 = SURFACE_STYLE_FILL_AREA(#510453); +#510453 = FILL_AREA_STYLE('',(#510454)); +#510454 = FILL_AREA_STYLE_COLOUR('',#510377); +#510455 = OVER_RIDING_STYLED_ITEM('overriding color',(#510456),#95445, + #506656); +#510456 = PRESENTATION_STYLE_ASSIGNMENT((#510457)); +#510457 = SURFACE_STYLE_USAGE(.BOTH.,#510458); +#510458 = SURFACE_SIDE_STYLE('',(#510459)); +#510459 = SURFACE_STYLE_FILL_AREA(#510460); +#510460 = FILL_AREA_STYLE('',(#510461)); +#510461 = FILL_AREA_STYLE_COLOUR('',#510377); +#510462 = OVER_RIDING_STYLED_ITEM('overriding color',(#510463),#95469, + #506656); +#510463 = PRESENTATION_STYLE_ASSIGNMENT((#510464)); +#510464 = SURFACE_STYLE_USAGE(.BOTH.,#510465); +#510465 = SURFACE_SIDE_STYLE('',(#510466)); +#510466 = SURFACE_STYLE_FILL_AREA(#510467); +#510467 = FILL_AREA_STYLE('',(#510468)); +#510468 = FILL_AREA_STYLE_COLOUR('',#510377); +#510469 = OVER_RIDING_STYLED_ITEM('overriding color',(#510470),#95507, + #506656); +#510470 = PRESENTATION_STYLE_ASSIGNMENT((#510471)); +#510471 = SURFACE_STYLE_USAGE(.BOTH.,#510472); +#510472 = SURFACE_SIDE_STYLE('',(#510473)); +#510473 = SURFACE_STYLE_FILL_AREA(#510474); +#510474 = FILL_AREA_STYLE('',(#510475)); +#510475 = FILL_AREA_STYLE_COLOUR('',#510377); +#510476 = OVER_RIDING_STYLED_ITEM('overriding color',(#510477),#95524, + #506656); +#510477 = PRESENTATION_STYLE_ASSIGNMENT((#510478)); +#510478 = SURFACE_STYLE_USAGE(.BOTH.,#510479); +#510479 = SURFACE_SIDE_STYLE('',(#510480)); +#510480 = SURFACE_STYLE_FILL_AREA(#510481); +#510481 = FILL_AREA_STYLE('',(#510482)); +#510482 = FILL_AREA_STYLE_COLOUR('',#510377); +#510483 = OVER_RIDING_STYLED_ITEM('overriding color',(#510484),#95555, + #506656); +#510484 = PRESENTATION_STYLE_ASSIGNMENT((#510485)); +#510485 = SURFACE_STYLE_USAGE(.BOTH.,#510486); +#510486 = SURFACE_SIDE_STYLE('',(#510487)); +#510487 = SURFACE_STYLE_FILL_AREA(#510488); +#510488 = FILL_AREA_STYLE('',(#510489)); +#510489 = FILL_AREA_STYLE_COLOUR('',#510377); +#510490 = OVER_RIDING_STYLED_ITEM('overriding color',(#510491),#95579, + #506656); +#510491 = PRESENTATION_STYLE_ASSIGNMENT((#510492)); +#510492 = SURFACE_STYLE_USAGE(.BOTH.,#510493); +#510493 = SURFACE_SIDE_STYLE('',(#510494)); +#510494 = SURFACE_STYLE_FILL_AREA(#510495); +#510495 = FILL_AREA_STYLE('',(#510496)); +#510496 = FILL_AREA_STYLE_COLOUR('',#510377); +#510497 = OVER_RIDING_STYLED_ITEM('overriding color',(#510498),#95603, + #506656); +#510498 = PRESENTATION_STYLE_ASSIGNMENT((#510499)); +#510499 = SURFACE_STYLE_USAGE(.BOTH.,#510500); +#510500 = SURFACE_SIDE_STYLE('',(#510501)); +#510501 = SURFACE_STYLE_FILL_AREA(#510502); +#510502 = FILL_AREA_STYLE('',(#510503)); +#510503 = FILL_AREA_STYLE_COLOUR('',#510377); +#510504 = OVER_RIDING_STYLED_ITEM('overriding color',(#510505),#95677, + #506656); +#510505 = PRESENTATION_STYLE_ASSIGNMENT((#510506)); +#510506 = SURFACE_STYLE_USAGE(.BOTH.,#510507); +#510507 = SURFACE_SIDE_STYLE('',(#510508)); +#510508 = SURFACE_STYLE_FILL_AREA(#510509); +#510509 = FILL_AREA_STYLE('',(#510510)); +#510510 = FILL_AREA_STYLE_COLOUR('',#510377); +#510511 = OVER_RIDING_STYLED_ITEM('overriding color',(#510512),#95744, + #506656); +#510512 = PRESENTATION_STYLE_ASSIGNMENT((#510513)); +#510513 = SURFACE_STYLE_USAGE(.BOTH.,#510514); +#510514 = SURFACE_SIDE_STYLE('',(#510515)); +#510515 = SURFACE_STYLE_FILL_AREA(#510516); +#510516 = FILL_AREA_STYLE('',(#510517)); +#510517 = FILL_AREA_STYLE_COLOUR('',#510377); +#510518 = OVER_RIDING_STYLED_ITEM('overriding color',(#510519),#95831, + #506656); +#510519 = PRESENTATION_STYLE_ASSIGNMENT((#510520)); +#510520 = SURFACE_STYLE_USAGE(.BOTH.,#510521); +#510521 = SURFACE_SIDE_STYLE('',(#510522)); +#510522 = SURFACE_STYLE_FILL_AREA(#510523); +#510523 = FILL_AREA_STYLE('',(#510524)); +#510524 = FILL_AREA_STYLE_COLOUR('',#510377); +#510525 = OVER_RIDING_STYLED_ITEM('overriding color',(#510526),#95862, + #506656); +#510526 = PRESENTATION_STYLE_ASSIGNMENT((#510527)); +#510527 = SURFACE_STYLE_USAGE(.BOTH.,#510528); +#510528 = SURFACE_SIDE_STYLE('',(#510529)); +#510529 = SURFACE_STYLE_FILL_AREA(#510530); +#510530 = FILL_AREA_STYLE('',(#510531)); +#510531 = FILL_AREA_STYLE_COLOUR('',#510377); +#510532 = OVER_RIDING_STYLED_ITEM('overriding color',(#510533),#95936, + #506656); +#510533 = PRESENTATION_STYLE_ASSIGNMENT((#510534)); +#510534 = SURFACE_STYLE_USAGE(.BOTH.,#510535); +#510535 = SURFACE_SIDE_STYLE('',(#510536)); +#510536 = SURFACE_STYLE_FILL_AREA(#510537); +#510537 = FILL_AREA_STYLE('',(#510538)); +#510538 = FILL_AREA_STYLE_COLOUR('',#510377); +#510539 = OVER_RIDING_STYLED_ITEM('overriding color',(#510540),#96010, + #506656); +#510540 = PRESENTATION_STYLE_ASSIGNMENT((#510541)); +#510541 = SURFACE_STYLE_USAGE(.BOTH.,#510542); +#510542 = SURFACE_SIDE_STYLE('',(#510543)); +#510543 = SURFACE_STYLE_FILL_AREA(#510544); +#510544 = FILL_AREA_STYLE('',(#510545)); +#510545 = FILL_AREA_STYLE_COLOUR('',#510377); +#510546 = OVER_RIDING_STYLED_ITEM('overriding color',(#510547),#96034, + #506656); +#510547 = PRESENTATION_STYLE_ASSIGNMENT((#510548)); +#510548 = SURFACE_STYLE_USAGE(.BOTH.,#510549); +#510549 = SURFACE_SIDE_STYLE('',(#510550)); +#510550 = SURFACE_STYLE_FILL_AREA(#510551); +#510551 = FILL_AREA_STYLE('',(#510552)); +#510552 = FILL_AREA_STYLE_COLOUR('',#510377); +#510553 = OVER_RIDING_STYLED_ITEM('overriding color',(#510554),#96051, + #506656); +#510554 = PRESENTATION_STYLE_ASSIGNMENT((#510555)); +#510555 = SURFACE_STYLE_USAGE(.BOTH.,#510556); +#510556 = SURFACE_SIDE_STYLE('',(#510557)); +#510557 = SURFACE_STYLE_FILL_AREA(#510558); +#510558 = FILL_AREA_STYLE('',(#510559)); +#510559 = FILL_AREA_STYLE_COLOUR('',#510377); +#510560 = OVER_RIDING_STYLED_ITEM('overriding color',(#510561),#96082, + #506656); +#510561 = PRESENTATION_STYLE_ASSIGNMENT((#510562)); +#510562 = SURFACE_STYLE_USAGE(.BOTH.,#510563); +#510563 = SURFACE_SIDE_STYLE('',(#510564)); +#510564 = SURFACE_STYLE_FILL_AREA(#510565); +#510565 = FILL_AREA_STYLE('',(#510566)); +#510566 = FILL_AREA_STYLE_COLOUR('',#510377); +#510567 = OVER_RIDING_STYLED_ITEM('overriding color',(#510568),#96106, + #506656); +#510568 = PRESENTATION_STYLE_ASSIGNMENT((#510569)); +#510569 = SURFACE_STYLE_USAGE(.BOTH.,#510570); +#510570 = SURFACE_SIDE_STYLE('',(#510571)); +#510571 = SURFACE_STYLE_FILL_AREA(#510572); +#510572 = FILL_AREA_STYLE('',(#510573)); +#510573 = FILL_AREA_STYLE_COLOUR('',#510377); +#510574 = OVER_RIDING_STYLED_ITEM('overriding color',(#510575),#96130, + #506656); +#510575 = PRESENTATION_STYLE_ASSIGNMENT((#510576)); +#510576 = SURFACE_STYLE_USAGE(.BOTH.,#510577); +#510577 = SURFACE_SIDE_STYLE('',(#510578)); +#510578 = SURFACE_STYLE_FILL_AREA(#510579); +#510579 = FILL_AREA_STYLE('',(#510580)); +#510580 = FILL_AREA_STYLE_COLOUR('',#510377); +#510581 = OVER_RIDING_STYLED_ITEM('overriding color',(#510582),#96154, + #506656); +#510582 = PRESENTATION_STYLE_ASSIGNMENT((#510583)); +#510583 = SURFACE_STYLE_USAGE(.BOTH.,#510584); +#510584 = SURFACE_SIDE_STYLE('',(#510585)); +#510585 = SURFACE_STYLE_FILL_AREA(#510586); +#510586 = FILL_AREA_STYLE('',(#510587)); +#510587 = FILL_AREA_STYLE_COLOUR('',#510377); +#510588 = OVER_RIDING_STYLED_ITEM('overriding color',(#510589),#96178, + #506656); +#510589 = PRESENTATION_STYLE_ASSIGNMENT((#510590)); +#510590 = SURFACE_STYLE_USAGE(.BOTH.,#510591); +#510591 = SURFACE_SIDE_STYLE('',(#510592)); +#510592 = SURFACE_STYLE_FILL_AREA(#510593); +#510593 = FILL_AREA_STYLE('',(#510594)); +#510594 = FILL_AREA_STYLE_COLOUR('',#510377); +#510595 = OVER_RIDING_STYLED_ITEM('overriding color',(#510596),#96202, + #506656); +#510596 = PRESENTATION_STYLE_ASSIGNMENT((#510597)); +#510597 = SURFACE_STYLE_USAGE(.BOTH.,#510598); +#510598 = SURFACE_SIDE_STYLE('',(#510599)); +#510599 = SURFACE_STYLE_FILL_AREA(#510600); +#510600 = FILL_AREA_STYLE('',(#510601)); +#510601 = FILL_AREA_STYLE_COLOUR('',#510377); +#510602 = OVER_RIDING_STYLED_ITEM('overriding color',(#510603),#96226, + #506656); +#510603 = PRESENTATION_STYLE_ASSIGNMENT((#510604)); +#510604 = SURFACE_STYLE_USAGE(.BOTH.,#510605); +#510605 = SURFACE_SIDE_STYLE('',(#510606)); +#510606 = SURFACE_STYLE_FILL_AREA(#510607); +#510607 = FILL_AREA_STYLE('',(#510608)); +#510608 = FILL_AREA_STYLE_COLOUR('',#510377); +#510609 = OVER_RIDING_STYLED_ITEM('overriding color',(#510610),#96250, + #506656); +#510610 = PRESENTATION_STYLE_ASSIGNMENT((#510611)); +#510611 = SURFACE_STYLE_USAGE(.BOTH.,#510612); +#510612 = SURFACE_SIDE_STYLE('',(#510613)); +#510613 = SURFACE_STYLE_FILL_AREA(#510614); +#510614 = FILL_AREA_STYLE('',(#510615)); +#510615 = FILL_AREA_STYLE_COLOUR('',#510377); +#510616 = OVER_RIDING_STYLED_ITEM('overriding color',(#510617),#96274, + #506656); +#510617 = PRESENTATION_STYLE_ASSIGNMENT((#510618)); +#510618 = SURFACE_STYLE_USAGE(.BOTH.,#510619); +#510619 = SURFACE_SIDE_STYLE('',(#510620)); +#510620 = SURFACE_STYLE_FILL_AREA(#510621); +#510621 = FILL_AREA_STYLE('',(#510622)); +#510622 = FILL_AREA_STYLE_COLOUR('',#510377); +#510623 = OVER_RIDING_STYLED_ITEM('overriding color',(#510624),#96298, + #506656); +#510624 = PRESENTATION_STYLE_ASSIGNMENT((#510625)); +#510625 = SURFACE_STYLE_USAGE(.BOTH.,#510626); +#510626 = SURFACE_SIDE_STYLE('',(#510627)); +#510627 = SURFACE_STYLE_FILL_AREA(#510628); +#510628 = FILL_AREA_STYLE('',(#510629)); +#510629 = FILL_AREA_STYLE_COLOUR('',#510377); +#510630 = OVER_RIDING_STYLED_ITEM('overriding color',(#510631),#96322, + #506656); +#510631 = PRESENTATION_STYLE_ASSIGNMENT((#510632)); +#510632 = SURFACE_STYLE_USAGE(.BOTH.,#510633); +#510633 = SURFACE_SIDE_STYLE('',(#510634)); +#510634 = SURFACE_STYLE_FILL_AREA(#510635); +#510635 = FILL_AREA_STYLE('',(#510636)); +#510636 = FILL_AREA_STYLE_COLOUR('',#510377); +#510637 = OVER_RIDING_STYLED_ITEM('overriding color',(#510638),#96339, + #506656); +#510638 = PRESENTATION_STYLE_ASSIGNMENT((#510639)); +#510639 = SURFACE_STYLE_USAGE(.BOTH.,#510640); +#510640 = SURFACE_SIDE_STYLE('',(#510641)); +#510641 = SURFACE_STYLE_FILL_AREA(#510642); +#510642 = FILL_AREA_STYLE('',(#510643)); +#510643 = FILL_AREA_STYLE_COLOUR('',#510377); +#510644 = OVER_RIDING_STYLED_ITEM('overriding color',(#510645),#96359, + #506656); +#510645 = PRESENTATION_STYLE_ASSIGNMENT((#510646)); +#510646 = SURFACE_STYLE_USAGE(.BOTH.,#510647); +#510647 = SURFACE_SIDE_STYLE('',(#510648)); +#510648 = SURFACE_STYLE_FILL_AREA(#510649); +#510649 = FILL_AREA_STYLE('',(#510650)); +#510650 = FILL_AREA_STYLE_COLOUR('',#510377); +#510651 = OVER_RIDING_STYLED_ITEM('overriding color',(#510652),#96390, + #506656); +#510652 = PRESENTATION_STYLE_ASSIGNMENT((#510653)); +#510653 = SURFACE_STYLE_USAGE(.BOTH.,#510654); +#510654 = SURFACE_SIDE_STYLE('',(#510655)); +#510655 = SURFACE_STYLE_FILL_AREA(#510656); +#510656 = FILL_AREA_STYLE('',(#510657)); +#510657 = FILL_AREA_STYLE_COLOUR('',#510377); +#510658 = OVER_RIDING_STYLED_ITEM('overriding color',(#510659),#96440, + #506656); +#510659 = PRESENTATION_STYLE_ASSIGNMENT((#510660)); +#510660 = SURFACE_STYLE_USAGE(.BOTH.,#510661); +#510661 = SURFACE_SIDE_STYLE('',(#510662)); +#510662 = SURFACE_STYLE_FILL_AREA(#510663); +#510663 = FILL_AREA_STYLE('',(#510664)); +#510664 = FILL_AREA_STYLE_COLOUR('',#510377); +#510665 = OVER_RIDING_STYLED_ITEM('overriding color',(#510666),#96514, + #506656); +#510666 = PRESENTATION_STYLE_ASSIGNMENT((#510667)); +#510667 = SURFACE_STYLE_USAGE(.BOTH.,#510668); +#510668 = SURFACE_SIDE_STYLE('',(#510669)); +#510669 = SURFACE_STYLE_FILL_AREA(#510670); +#510670 = FILL_AREA_STYLE('',(#510671)); +#510671 = FILL_AREA_STYLE_COLOUR('',#510377); +#510672 = OVER_RIDING_STYLED_ITEM('overriding color',(#510673),#96588, + #506656); +#510673 = PRESENTATION_STYLE_ASSIGNMENT((#510674)); +#510674 = SURFACE_STYLE_USAGE(.BOTH.,#510675); +#510675 = SURFACE_SIDE_STYLE('',(#510676)); +#510676 = SURFACE_STYLE_FILL_AREA(#510677); +#510677 = FILL_AREA_STYLE('',(#510678)); +#510678 = FILL_AREA_STYLE_COLOUR('',#510377); +#510679 = OVER_RIDING_STYLED_ITEM('overriding color',(#510680),#96638, + #506656); +#510680 = PRESENTATION_STYLE_ASSIGNMENT((#510681)); +#510681 = SURFACE_STYLE_USAGE(.BOTH.,#510682); +#510682 = SURFACE_SIDE_STYLE('',(#510683)); +#510683 = SURFACE_STYLE_FILL_AREA(#510684); +#510684 = FILL_AREA_STYLE('',(#510685)); +#510685 = FILL_AREA_STYLE_COLOUR('',#510377); +#510686 = OVER_RIDING_STYLED_ITEM('overriding color',(#510687),#96662, + #506656); +#510687 = PRESENTATION_STYLE_ASSIGNMENT((#510688)); +#510688 = SURFACE_STYLE_USAGE(.BOTH.,#510689); +#510689 = SURFACE_SIDE_STYLE('',(#510690)); +#510690 = SURFACE_STYLE_FILL_AREA(#510691); +#510691 = FILL_AREA_STYLE('',(#510692)); +#510692 = FILL_AREA_STYLE_COLOUR('',#510377); +#510693 = OVER_RIDING_STYLED_ITEM('overriding color',(#510694),#96712, + #506656); +#510694 = PRESENTATION_STYLE_ASSIGNMENT((#510695)); +#510695 = SURFACE_STYLE_USAGE(.BOTH.,#510696); +#510696 = SURFACE_SIDE_STYLE('',(#510697)); +#510697 = SURFACE_STYLE_FILL_AREA(#510698); +#510698 = FILL_AREA_STYLE('',(#510699)); +#510699 = FILL_AREA_STYLE_COLOUR('',#510377); +#510700 = OVER_RIDING_STYLED_ITEM('overriding color',(#510701),#96786, + #506656); +#510701 = PRESENTATION_STYLE_ASSIGNMENT((#510702)); +#510702 = SURFACE_STYLE_USAGE(.BOTH.,#510703); +#510703 = SURFACE_SIDE_STYLE('',(#510704)); +#510704 = SURFACE_STYLE_FILL_AREA(#510705); +#510705 = FILL_AREA_STYLE('',(#510706)); +#510706 = FILL_AREA_STYLE_COLOUR('',#510377); +#510707 = OVER_RIDING_STYLED_ITEM('overriding color',(#510708),#96860, + #506656); +#510708 = PRESENTATION_STYLE_ASSIGNMENT((#510709)); +#510709 = SURFACE_STYLE_USAGE(.BOTH.,#510710); +#510710 = SURFACE_SIDE_STYLE('',(#510711)); +#510711 = SURFACE_STYLE_FILL_AREA(#510712); +#510712 = FILL_AREA_STYLE('',(#510713)); +#510713 = FILL_AREA_STYLE_COLOUR('',#510377); +#510714 = OVER_RIDING_STYLED_ITEM('overriding color',(#510715),#96903, + #506656); +#510715 = PRESENTATION_STYLE_ASSIGNMENT((#510716)); +#510716 = SURFACE_STYLE_USAGE(.BOTH.,#510717); +#510717 = SURFACE_SIDE_STYLE('',(#510718)); +#510718 = SURFACE_STYLE_FILL_AREA(#510719); +#510719 = FILL_AREA_STYLE('',(#510720)); +#510720 = FILL_AREA_STYLE_COLOUR('',#510377); +#510721 = OVER_RIDING_STYLED_ITEM('overriding color',(#510722),#96921, + #506656); +#510722 = PRESENTATION_STYLE_ASSIGNMENT((#510723)); +#510723 = SURFACE_STYLE_USAGE(.BOTH.,#510724); +#510724 = SURFACE_SIDE_STYLE('',(#510725)); +#510725 = SURFACE_STYLE_FILL_AREA(#510726); +#510726 = FILL_AREA_STYLE('',(#510727)); +#510727 = FILL_AREA_STYLE_COLOUR('',#510377); +#510728 = OVER_RIDING_STYLED_ITEM('overriding color',(#510729),#96952, + #506656); +#510729 = PRESENTATION_STYLE_ASSIGNMENT((#510730)); +#510730 = SURFACE_STYLE_USAGE(.BOTH.,#510731); +#510731 = SURFACE_SIDE_STYLE('',(#510732)); +#510732 = SURFACE_STYLE_FILL_AREA(#510733); +#510733 = FILL_AREA_STYLE('',(#510734)); +#510734 = FILL_AREA_STYLE_COLOUR('',#510377); +#510735 = OVER_RIDING_STYLED_ITEM('overriding color',(#510736),#96976, + #506656); +#510736 = PRESENTATION_STYLE_ASSIGNMENT((#510737)); +#510737 = SURFACE_STYLE_USAGE(.BOTH.,#510738); +#510738 = SURFACE_SIDE_STYLE('',(#510739)); +#510739 = SURFACE_STYLE_FILL_AREA(#510740); +#510740 = FILL_AREA_STYLE('',(#510741)); +#510741 = FILL_AREA_STYLE_COLOUR('',#510377); +#510742 = OVER_RIDING_STYLED_ITEM('overriding color',(#510743),#97000, + #506656); +#510743 = PRESENTATION_STYLE_ASSIGNMENT((#510744)); +#510744 = SURFACE_STYLE_USAGE(.BOTH.,#510745); +#510745 = SURFACE_SIDE_STYLE('',(#510746)); +#510746 = SURFACE_STYLE_FILL_AREA(#510747); +#510747 = FILL_AREA_STYLE('',(#510748)); +#510748 = FILL_AREA_STYLE_COLOUR('',#510377); +#510749 = OVER_RIDING_STYLED_ITEM('overriding color',(#510750),#97024, + #506656); +#510750 = PRESENTATION_STYLE_ASSIGNMENT((#510751)); +#510751 = SURFACE_STYLE_USAGE(.BOTH.,#510752); +#510752 = SURFACE_SIDE_STYLE('',(#510753)); +#510753 = SURFACE_STYLE_FILL_AREA(#510754); +#510754 = FILL_AREA_STYLE('',(#510755)); +#510755 = FILL_AREA_STYLE_COLOUR('',#510377); +#510756 = OVER_RIDING_STYLED_ITEM('overriding color',(#510757),#97048, + #506656); +#510757 = PRESENTATION_STYLE_ASSIGNMENT((#510758)); +#510758 = SURFACE_STYLE_USAGE(.BOTH.,#510759); +#510759 = SURFACE_SIDE_STYLE('',(#510760)); +#510760 = SURFACE_STYLE_FILL_AREA(#510761); +#510761 = FILL_AREA_STYLE('',(#510762)); +#510762 = FILL_AREA_STYLE_COLOUR('',#510377); +#510763 = OVER_RIDING_STYLED_ITEM('overriding color',(#510764),#97065, + #506656); +#510764 = PRESENTATION_STYLE_ASSIGNMENT((#510765)); +#510765 = SURFACE_STYLE_USAGE(.BOTH.,#510766); +#510766 = SURFACE_SIDE_STYLE('',(#510767)); +#510767 = SURFACE_STYLE_FILL_AREA(#510768); +#510768 = FILL_AREA_STYLE('',(#510769)); +#510769 = FILL_AREA_STYLE_COLOUR('',#510377); +#510770 = OVER_RIDING_STYLED_ITEM('overriding color',(#510771),#97079, + #506656); +#510771 = PRESENTATION_STYLE_ASSIGNMENT((#510772)); +#510772 = SURFACE_STYLE_USAGE(.BOTH.,#510773); +#510773 = SURFACE_SIDE_STYLE('',(#510774)); +#510774 = SURFACE_STYLE_FILL_AREA(#510775); +#510775 = FILL_AREA_STYLE('',(#510776)); +#510776 = FILL_AREA_STYLE_COLOUR('',#506700); +#510777 = OVER_RIDING_STYLED_ITEM('overriding color',(#510778),#97093, + #506656); +#510778 = PRESENTATION_STYLE_ASSIGNMENT((#510779)); +#510779 = SURFACE_STYLE_USAGE(.BOTH.,#510780); +#510780 = SURFACE_SIDE_STYLE('',(#510781)); +#510781 = SURFACE_STYLE_FILL_AREA(#510782); +#510782 = FILL_AREA_STYLE('',(#510783)); +#510783 = FILL_AREA_STYLE_COLOUR('',#506700); +#510784 = STYLED_ITEM('color',(#510785),#97106); +#510785 = PRESENTATION_STYLE_ASSIGNMENT((#510786)); +#510786 = SURFACE_STYLE_USAGE(.BOTH.,#510787); +#510787 = SURFACE_SIDE_STYLE('',(#510788)); +#510788 = SURFACE_STYLE_FILL_AREA(#510789); +#510789 = FILL_AREA_STYLE('',(#510790)); +#510790 = FILL_AREA_STYLE_COLOUR('',#506663); +#510791 = OVER_RIDING_STYLED_ITEM('overriding color',(#510792),#97108, + #510784); +#510792 = PRESENTATION_STYLE_ASSIGNMENT((#510793)); +#510793 = SURFACE_STYLE_USAGE(.BOTH.,#510794); +#510794 = SURFACE_SIDE_STYLE('',(#510795)); +#510795 = SURFACE_STYLE_FILL_AREA(#510796); +#510796 = FILL_AREA_STYLE('',(#510797)); +#510797 = FILL_AREA_STYLE_COLOUR('',#510798); +#510798 = DRAUGHTING_PRE_DEFINED_COLOUR('black'); +#510799 = OVER_RIDING_STYLED_ITEM('overriding color',(#510800),#97148, + #510784); +#510800 = PRESENTATION_STYLE_ASSIGNMENT((#510801)); +#510801 = SURFACE_STYLE_USAGE(.BOTH.,#510802); +#510802 = SURFACE_SIDE_STYLE('',(#510803)); +#510803 = SURFACE_STYLE_FILL_AREA(#510804); +#510804 = FILL_AREA_STYLE('',(#510805)); +#510805 = FILL_AREA_STYLE_COLOUR('',#510798); +#510806 = OVER_RIDING_STYLED_ITEM('overriding color',(#510807),#97179, + #510784); +#510807 = PRESENTATION_STYLE_ASSIGNMENT((#510808)); +#510808 = SURFACE_STYLE_USAGE(.BOTH.,#510809); +#510809 = SURFACE_SIDE_STYLE('',(#510810)); +#510810 = SURFACE_STYLE_FILL_AREA(#510811); +#510811 = FILL_AREA_STYLE('',(#510812)); +#510812 = FILL_AREA_STYLE_COLOUR('',#510798); +#510813 = OVER_RIDING_STYLED_ITEM('overriding color',(#510814),#97210, + #510784); +#510814 = PRESENTATION_STYLE_ASSIGNMENT((#510815)); +#510815 = SURFACE_STYLE_USAGE(.BOTH.,#510816); +#510816 = SURFACE_SIDE_STYLE('',(#510817)); +#510817 = SURFACE_STYLE_FILL_AREA(#510818); +#510818 = FILL_AREA_STYLE('',(#510819)); +#510819 = FILL_AREA_STYLE_COLOUR('',#510798); +#510820 = OVER_RIDING_STYLED_ITEM('overriding color',(#510821),#97241, + #510784); +#510821 = PRESENTATION_STYLE_ASSIGNMENT((#510822)); +#510822 = SURFACE_STYLE_USAGE(.BOTH.,#510823); +#510823 = SURFACE_SIDE_STYLE('',(#510824)); +#510824 = SURFACE_STYLE_FILL_AREA(#510825); +#510825 = FILL_AREA_STYLE('',(#510826)); +#510826 = FILL_AREA_STYLE_COLOUR('',#510798); +#510827 = OVER_RIDING_STYLED_ITEM('overriding color',(#510828),#97272, + #510784); +#510828 = PRESENTATION_STYLE_ASSIGNMENT((#510829)); +#510829 = SURFACE_STYLE_USAGE(.BOTH.,#510830); +#510830 = SURFACE_SIDE_STYLE('',(#510831)); +#510831 = SURFACE_STYLE_FILL_AREA(#510832); +#510832 = FILL_AREA_STYLE('',(#510833)); +#510833 = FILL_AREA_STYLE_COLOUR('',#510798); +#510834 = OVER_RIDING_STYLED_ITEM('overriding color',(#510835),#97294, + #510784); +#510835 = PRESENTATION_STYLE_ASSIGNMENT((#510836)); +#510836 = SURFACE_STYLE_USAGE(.BOTH.,#510837); +#510837 = SURFACE_SIDE_STYLE('',(#510838)); +#510838 = SURFACE_STYLE_FILL_AREA(#510839); +#510839 = FILL_AREA_STYLE('',(#510840)); +#510840 = FILL_AREA_STYLE_COLOUR('',#510798); +#510841 = OVER_RIDING_STYLED_ITEM('overriding color',(#510842),#97308, + #510784); +#510842 = PRESENTATION_STYLE_ASSIGNMENT((#510843)); +#510843 = SURFACE_STYLE_USAGE(.BOTH.,#510844); +#510844 = SURFACE_SIDE_STYLE('',(#510845)); +#510845 = SURFACE_STYLE_FILL_AREA(#510846); +#510846 = FILL_AREA_STYLE('',(#510847)); +#510847 = FILL_AREA_STYLE_COLOUR('',#510798); +#510848 = STYLED_ITEM('color',(#510849),#97322); +#510849 = PRESENTATION_STYLE_ASSIGNMENT((#510850)); +#510850 = SURFACE_STYLE_USAGE(.BOTH.,#510851); +#510851 = SURFACE_SIDE_STYLE('',(#510852)); +#510852 = SURFACE_STYLE_FILL_AREA(#510853); +#510853 = FILL_AREA_STYLE('',(#510854)); +#510854 = FILL_AREA_STYLE_COLOUR('',#506663); +#510855 = OVER_RIDING_STYLED_ITEM('overriding color',(#510856),#97324, + #510848); +#510856 = PRESENTATION_STYLE_ASSIGNMENT((#510857)); +#510857 = SURFACE_STYLE_USAGE(.BOTH.,#510858); +#510858 = SURFACE_SIDE_STYLE('',(#510859)); +#510859 = SURFACE_STYLE_FILL_AREA(#510860); +#510860 = FILL_AREA_STYLE('',(#510861)); +#510861 = FILL_AREA_STYLE_COLOUR('',#510798); +#510862 = OVER_RIDING_STYLED_ITEM('overriding color',(#510863),#97370, + #510848); +#510863 = PRESENTATION_STYLE_ASSIGNMENT((#510864)); +#510864 = SURFACE_STYLE_USAGE(.BOTH.,#510865); +#510865 = SURFACE_SIDE_STYLE('',(#510866)); +#510866 = SURFACE_STYLE_FILL_AREA(#510867); +#510867 = FILL_AREA_STYLE('',(#510868)); +#510868 = FILL_AREA_STYLE_COLOUR('',#510798); +#510869 = OVER_RIDING_STYLED_ITEM('overriding color',(#510870),#97401, + #510848); +#510870 = PRESENTATION_STYLE_ASSIGNMENT((#510871)); +#510871 = SURFACE_STYLE_USAGE(.BOTH.,#510872); +#510872 = SURFACE_SIDE_STYLE('',(#510873)); +#510873 = SURFACE_STYLE_FILL_AREA(#510874); +#510874 = FILL_AREA_STYLE('',(#510875)); +#510875 = FILL_AREA_STYLE_COLOUR('',#510798); +#510876 = OVER_RIDING_STYLED_ITEM('overriding color',(#510877),#97438, + #510848); +#510877 = PRESENTATION_STYLE_ASSIGNMENT((#510878)); +#510878 = SURFACE_STYLE_USAGE(.BOTH.,#510879); +#510879 = SURFACE_SIDE_STYLE('',(#510880)); +#510880 = SURFACE_STYLE_FILL_AREA(#510881); +#510881 = FILL_AREA_STYLE('',(#510882)); +#510882 = FILL_AREA_STYLE_COLOUR('',#510798); +#510883 = OVER_RIDING_STYLED_ITEM('overriding color',(#510884),#97475, + #510848); +#510884 = PRESENTATION_STYLE_ASSIGNMENT((#510885)); +#510885 = SURFACE_STYLE_USAGE(.BOTH.,#510886); +#510886 = SURFACE_SIDE_STYLE('',(#510887)); +#510887 = SURFACE_STYLE_FILL_AREA(#510888); +#510888 = FILL_AREA_STYLE('',(#510889)); +#510889 = FILL_AREA_STYLE_COLOUR('',#510798); +#510890 = OVER_RIDING_STYLED_ITEM('overriding color',(#510891),#97512, + #510848); +#510891 = PRESENTATION_STYLE_ASSIGNMENT((#510892)); +#510892 = SURFACE_STYLE_USAGE(.BOTH.,#510893); +#510893 = SURFACE_SIDE_STYLE('',(#510894)); +#510894 = SURFACE_STYLE_FILL_AREA(#510895); +#510895 = FILL_AREA_STYLE('',(#510896)); +#510896 = FILL_AREA_STYLE_COLOUR('',#510798); +#510897 = OVER_RIDING_STYLED_ITEM('overriding color',(#510898),#97549, + #510848); +#510898 = PRESENTATION_STYLE_ASSIGNMENT((#510899)); +#510899 = SURFACE_STYLE_USAGE(.BOTH.,#510900); +#510900 = SURFACE_SIDE_STYLE('',(#510901)); +#510901 = SURFACE_STYLE_FILL_AREA(#510902); +#510902 = FILL_AREA_STYLE('',(#510903)); +#510903 = FILL_AREA_STYLE_COLOUR('',#510798); +#510904 = OVER_RIDING_STYLED_ITEM('overriding color',(#510905),#97586, + #510848); +#510905 = PRESENTATION_STYLE_ASSIGNMENT((#510906)); +#510906 = SURFACE_STYLE_USAGE(.BOTH.,#510907); +#510907 = SURFACE_SIDE_STYLE('',(#510908)); +#510908 = SURFACE_STYLE_FILL_AREA(#510909); +#510909 = FILL_AREA_STYLE('',(#510910)); +#510910 = FILL_AREA_STYLE_COLOUR('',#510798); +#510911 = OVER_RIDING_STYLED_ITEM('overriding color',(#510912),#97623, + #510848); +#510912 = PRESENTATION_STYLE_ASSIGNMENT((#510913)); +#510913 = SURFACE_STYLE_USAGE(.BOTH.,#510914); +#510914 = SURFACE_SIDE_STYLE('',(#510915)); +#510915 = SURFACE_STYLE_FILL_AREA(#510916); +#510916 = FILL_AREA_STYLE('',(#510917)); +#510917 = FILL_AREA_STYLE_COLOUR('',#510798); +#510918 = OVER_RIDING_STYLED_ITEM('overriding color',(#510919),#97654, + #510848); +#510919 = PRESENTATION_STYLE_ASSIGNMENT((#510920)); +#510920 = SURFACE_STYLE_USAGE(.BOTH.,#510921); +#510921 = SURFACE_SIDE_STYLE('',(#510922)); +#510922 = SURFACE_STYLE_FILL_AREA(#510923); +#510923 = FILL_AREA_STYLE('',(#510924)); +#510924 = FILL_AREA_STYLE_COLOUR('',#510798); +#510925 = OVER_RIDING_STYLED_ITEM('overriding color',(#510926),#97691, + #510848); +#510926 = PRESENTATION_STYLE_ASSIGNMENT((#510927)); +#510927 = SURFACE_STYLE_USAGE(.BOTH.,#510928); +#510928 = SURFACE_SIDE_STYLE('',(#510929)); +#510929 = SURFACE_STYLE_FILL_AREA(#510930); +#510930 = FILL_AREA_STYLE('',(#510931)); +#510931 = FILL_AREA_STYLE_COLOUR('',#510798); +#510932 = OVER_RIDING_STYLED_ITEM('overriding color',(#510933),#97728, + #510848); +#510933 = PRESENTATION_STYLE_ASSIGNMENT((#510934)); +#510934 = SURFACE_STYLE_USAGE(.BOTH.,#510935); +#510935 = SURFACE_SIDE_STYLE('',(#510936)); +#510936 = SURFACE_STYLE_FILL_AREA(#510937); +#510937 = FILL_AREA_STYLE('',(#510938)); +#510938 = FILL_AREA_STYLE_COLOUR('',#510798); +#510939 = OVER_RIDING_STYLED_ITEM('overriding color',(#510940),#97765, + #510848); +#510940 = PRESENTATION_STYLE_ASSIGNMENT((#510941)); +#510941 = SURFACE_STYLE_USAGE(.BOTH.,#510942); +#510942 = SURFACE_SIDE_STYLE('',(#510943)); +#510943 = SURFACE_STYLE_FILL_AREA(#510944); +#510944 = FILL_AREA_STYLE('',(#510945)); +#510945 = FILL_AREA_STYLE_COLOUR('',#510798); +#510946 = OVER_RIDING_STYLED_ITEM('overriding color',(#510947),#97802, + #510848); +#510947 = PRESENTATION_STYLE_ASSIGNMENT((#510948)); +#510948 = SURFACE_STYLE_USAGE(.BOTH.,#510949); +#510949 = SURFACE_SIDE_STYLE('',(#510950)); +#510950 = SURFACE_STYLE_FILL_AREA(#510951); +#510951 = FILL_AREA_STYLE('',(#510952)); +#510952 = FILL_AREA_STYLE_COLOUR('',#510798); +#510953 = OVER_RIDING_STYLED_ITEM('overriding color',(#510954),#97830, + #510848); +#510954 = PRESENTATION_STYLE_ASSIGNMENT((#510955)); +#510955 = SURFACE_STYLE_USAGE(.BOTH.,#510956); +#510956 = SURFACE_SIDE_STYLE('',(#510957)); +#510957 = SURFACE_STYLE_FILL_AREA(#510958); +#510958 = FILL_AREA_STYLE('',(#510959)); +#510959 = FILL_AREA_STYLE_COLOUR('',#510798); +#510960 = OVER_RIDING_STYLED_ITEM('overriding color',(#510961),#97852, + #510848); +#510961 = PRESENTATION_STYLE_ASSIGNMENT((#510962)); +#510962 = SURFACE_STYLE_USAGE(.BOTH.,#510963); +#510963 = SURFACE_SIDE_STYLE('',(#510964)); +#510964 = SURFACE_STYLE_FILL_AREA(#510965); +#510965 = FILL_AREA_STYLE('',(#510966)); +#510966 = FILL_AREA_STYLE_COLOUR('',#510798); +#510967 = STYLED_ITEM('color',(#510968),#97874); +#510968 = PRESENTATION_STYLE_ASSIGNMENT((#510969)); +#510969 = SURFACE_STYLE_USAGE(.BOTH.,#510970); +#510970 = SURFACE_SIDE_STYLE('',(#510971)); +#510971 = SURFACE_STYLE_FILL_AREA(#510972); +#510972 = FILL_AREA_STYLE('',(#510973)); +#510973 = FILL_AREA_STYLE_COLOUR('',#506663); +#510974 = OVER_RIDING_STYLED_ITEM('overriding color',(#510975),#97876, + #510967); +#510975 = PRESENTATION_STYLE_ASSIGNMENT((#510976)); +#510976 = SURFACE_STYLE_USAGE(.BOTH.,#510977); +#510977 = SURFACE_SIDE_STYLE('',(#510978)); +#510978 = SURFACE_STYLE_FILL_AREA(#510979); +#510979 = FILL_AREA_STYLE('',(#510980)); +#510980 = FILL_AREA_STYLE_COLOUR('',#510798); +#510981 = OVER_RIDING_STYLED_ITEM('overriding color',(#510982),#97916, + #510967); +#510982 = PRESENTATION_STYLE_ASSIGNMENT((#510983)); +#510983 = SURFACE_STYLE_USAGE(.BOTH.,#510984); +#510984 = SURFACE_SIDE_STYLE('',(#510985)); +#510985 = SURFACE_STYLE_FILL_AREA(#510986); +#510986 = FILL_AREA_STYLE('',(#510987)); +#510987 = FILL_AREA_STYLE_COLOUR('',#510798); +#510988 = OVER_RIDING_STYLED_ITEM('overriding color',(#510989),#97947, + #510967); +#510989 = PRESENTATION_STYLE_ASSIGNMENT((#510990)); +#510990 = SURFACE_STYLE_USAGE(.BOTH.,#510991); +#510991 = SURFACE_SIDE_STYLE('',(#510992)); +#510992 = SURFACE_STYLE_FILL_AREA(#510993); +#510993 = FILL_AREA_STYLE('',(#510994)); +#510994 = FILL_AREA_STYLE_COLOUR('',#510798); +#510995 = OVER_RIDING_STYLED_ITEM('overriding color',(#510996),#97978, + #510967); +#510996 = PRESENTATION_STYLE_ASSIGNMENT((#510997)); +#510997 = SURFACE_STYLE_USAGE(.BOTH.,#510998); +#510998 = SURFACE_SIDE_STYLE('',(#510999)); +#510999 = SURFACE_STYLE_FILL_AREA(#511000); +#511000 = FILL_AREA_STYLE('',(#511001)); +#511001 = FILL_AREA_STYLE_COLOUR('',#510798); +#511002 = OVER_RIDING_STYLED_ITEM('overriding color',(#511003),#98009, + #510967); +#511003 = PRESENTATION_STYLE_ASSIGNMENT((#511004)); +#511004 = SURFACE_STYLE_USAGE(.BOTH.,#511005); +#511005 = SURFACE_SIDE_STYLE('',(#511006)); +#511006 = SURFACE_STYLE_FILL_AREA(#511007); +#511007 = FILL_AREA_STYLE('',(#511008)); +#511008 = FILL_AREA_STYLE_COLOUR('',#510798); +#511009 = OVER_RIDING_STYLED_ITEM('overriding color',(#511010),#98040, + #510967); +#511010 = PRESENTATION_STYLE_ASSIGNMENT((#511011)); +#511011 = SURFACE_STYLE_USAGE(.BOTH.,#511012); +#511012 = SURFACE_SIDE_STYLE('',(#511013)); +#511013 = SURFACE_STYLE_FILL_AREA(#511014); +#511014 = FILL_AREA_STYLE('',(#511015)); +#511015 = FILL_AREA_STYLE_COLOUR('',#510798); +#511016 = OVER_RIDING_STYLED_ITEM('overriding color',(#511017),#98071, + #510967); +#511017 = PRESENTATION_STYLE_ASSIGNMENT((#511018)); +#511018 = SURFACE_STYLE_USAGE(.BOTH.,#511019); +#511019 = SURFACE_SIDE_STYLE('',(#511020)); +#511020 = SURFACE_STYLE_FILL_AREA(#511021); +#511021 = FILL_AREA_STYLE('',(#511022)); +#511022 = FILL_AREA_STYLE_COLOUR('',#510798); +#511023 = OVER_RIDING_STYLED_ITEM('overriding color',(#511024),#98102, + #510967); +#511024 = PRESENTATION_STYLE_ASSIGNMENT((#511025)); +#511025 = SURFACE_STYLE_USAGE(.BOTH.,#511026); +#511026 = SURFACE_SIDE_STYLE('',(#511027)); +#511027 = SURFACE_STYLE_FILL_AREA(#511028); +#511028 = FILL_AREA_STYLE('',(#511029)); +#511029 = FILL_AREA_STYLE_COLOUR('',#510798); +#511030 = OVER_RIDING_STYLED_ITEM('overriding color',(#511031),#98133, + #510967); +#511031 = PRESENTATION_STYLE_ASSIGNMENT((#511032)); +#511032 = SURFACE_STYLE_USAGE(.BOTH.,#511033); +#511033 = SURFACE_SIDE_STYLE('',(#511034)); +#511034 = SURFACE_STYLE_FILL_AREA(#511035); +#511035 = FILL_AREA_STYLE('',(#511036)); +#511036 = FILL_AREA_STYLE_COLOUR('',#510798); +#511037 = OVER_RIDING_STYLED_ITEM('overriding color',(#511038),#98164, + #510967); +#511038 = PRESENTATION_STYLE_ASSIGNMENT((#511039)); +#511039 = SURFACE_STYLE_USAGE(.BOTH.,#511040); +#511040 = SURFACE_SIDE_STYLE('',(#511041)); +#511041 = SURFACE_STYLE_FILL_AREA(#511042); +#511042 = FILL_AREA_STYLE('',(#511043)); +#511043 = FILL_AREA_STYLE_COLOUR('',#510798); +#511044 = OVER_RIDING_STYLED_ITEM('overriding color',(#511045),#98195, + #510967); +#511045 = PRESENTATION_STYLE_ASSIGNMENT((#511046)); +#511046 = SURFACE_STYLE_USAGE(.BOTH.,#511047); +#511047 = SURFACE_SIDE_STYLE('',(#511048)); +#511048 = SURFACE_STYLE_FILL_AREA(#511049); +#511049 = FILL_AREA_STYLE('',(#511050)); +#511050 = FILL_AREA_STYLE_COLOUR('',#510798); +#511051 = OVER_RIDING_STYLED_ITEM('overriding color',(#511052),#98226, + #510967); +#511052 = PRESENTATION_STYLE_ASSIGNMENT((#511053)); +#511053 = SURFACE_STYLE_USAGE(.BOTH.,#511054); +#511054 = SURFACE_SIDE_STYLE('',(#511055)); +#511055 = SURFACE_STYLE_FILL_AREA(#511056); +#511056 = FILL_AREA_STYLE('',(#511057)); +#511057 = FILL_AREA_STYLE_COLOUR('',#510798); +#511058 = OVER_RIDING_STYLED_ITEM('overriding color',(#511059),#98248, + #510967); +#511059 = PRESENTATION_STYLE_ASSIGNMENT((#511060)); +#511060 = SURFACE_STYLE_USAGE(.BOTH.,#511061); +#511061 = SURFACE_SIDE_STYLE('',(#511062)); +#511062 = SURFACE_STYLE_FILL_AREA(#511063); +#511063 = FILL_AREA_STYLE('',(#511064)); +#511064 = FILL_AREA_STYLE_COLOUR('',#510798); +#511065 = OVER_RIDING_STYLED_ITEM('overriding color',(#511066),#98268, + #510967); +#511066 = PRESENTATION_STYLE_ASSIGNMENT((#511067)); +#511067 = SURFACE_STYLE_USAGE(.BOTH.,#511068); +#511068 = SURFACE_SIDE_STYLE('',(#511069)); +#511069 = SURFACE_STYLE_FILL_AREA(#511070); +#511070 = FILL_AREA_STYLE('',(#511071)); +#511071 = FILL_AREA_STYLE_COLOUR('',#510798); +#511072 = STYLED_ITEM('color',(#511073),#98288); +#511073 = PRESENTATION_STYLE_ASSIGNMENT((#511074)); +#511074 = SURFACE_STYLE_USAGE(.BOTH.,#511075); +#511075 = SURFACE_SIDE_STYLE('',(#511076)); +#511076 = SURFACE_STYLE_FILL_AREA(#511077); +#511077 = FILL_AREA_STYLE('',(#511078)); +#511078 = FILL_AREA_STYLE_COLOUR('',#506663); +#511079 = OVER_RIDING_STYLED_ITEM('overriding color',(#511080),#98290, + #511072); +#511080 = PRESENTATION_STYLE_ASSIGNMENT((#511081)); +#511081 = SURFACE_STYLE_USAGE(.BOTH.,#511082); +#511082 = SURFACE_SIDE_STYLE('',(#511083)); +#511083 = SURFACE_STYLE_FILL_AREA(#511084); +#511084 = FILL_AREA_STYLE('',(#511085)); +#511085 = FILL_AREA_STYLE_COLOUR('',#510798); +#511086 = OVER_RIDING_STYLED_ITEM('overriding color',(#511087),#98420, + #511072); +#511087 = PRESENTATION_STYLE_ASSIGNMENT((#511088)); +#511088 = SURFACE_STYLE_USAGE(.BOTH.,#511089); +#511089 = SURFACE_SIDE_STYLE('',(#511090)); +#511090 = SURFACE_STYLE_FILL_AREA(#511091); +#511091 = FILL_AREA_STYLE('',(#511092)); +#511092 = FILL_AREA_STYLE_COLOUR('',#510798); +#511093 = OVER_RIDING_STYLED_ITEM('overriding color',(#511094),#98550, + #511072); +#511094 = PRESENTATION_STYLE_ASSIGNMENT((#511095)); +#511095 = SURFACE_STYLE_USAGE(.BOTH.,#511096); +#511096 = SURFACE_SIDE_STYLE('',(#511097)); +#511097 = SURFACE_STYLE_FILL_AREA(#511098); +#511098 = FILL_AREA_STYLE('',(#511099)); +#511099 = FILL_AREA_STYLE_COLOUR('',#510798); +#511100 = OVER_RIDING_STYLED_ITEM('overriding color',(#511101),#98572, + #511072); +#511101 = PRESENTATION_STYLE_ASSIGNMENT((#511102)); +#511102 = SURFACE_STYLE_USAGE(.BOTH.,#511103); +#511103 = SURFACE_SIDE_STYLE('',(#511104)); +#511104 = SURFACE_STYLE_FILL_AREA(#511105); +#511105 = FILL_AREA_STYLE('',(#511106)); +#511106 = FILL_AREA_STYLE_COLOUR('',#510798); +#511107 = OVER_RIDING_STYLED_ITEM('overriding color',(#511108),#98593, + #511072); +#511108 = PRESENTATION_STYLE_ASSIGNMENT((#511109)); +#511109 = SURFACE_STYLE_USAGE(.BOTH.,#511110); +#511110 = SURFACE_SIDE_STYLE('',(#511111)); +#511111 = SURFACE_STYLE_FILL_AREA(#511112); +#511112 = FILL_AREA_STYLE('',(#511113)); +#511113 = FILL_AREA_STYLE_COLOUR('',#510798); +#511114 = OVER_RIDING_STYLED_ITEM('overriding color',(#511115),#98614, + #511072); +#511115 = PRESENTATION_STYLE_ASSIGNMENT((#511116)); +#511116 = SURFACE_STYLE_USAGE(.BOTH.,#511117); +#511117 = SURFACE_SIDE_STYLE('',(#511118)); +#511118 = SURFACE_STYLE_FILL_AREA(#511119); +#511119 = FILL_AREA_STYLE('',(#511120)); +#511120 = FILL_AREA_STYLE_COLOUR('',#510798); +#511121 = OVER_RIDING_STYLED_ITEM('overriding color',(#511122),#98635, + #511072); +#511122 = PRESENTATION_STYLE_ASSIGNMENT((#511123)); +#511123 = SURFACE_STYLE_USAGE(.BOTH.,#511124); +#511124 = SURFACE_SIDE_STYLE('',(#511125)); +#511125 = SURFACE_STYLE_FILL_AREA(#511126); +#511126 = FILL_AREA_STYLE('',(#511127)); +#511127 = FILL_AREA_STYLE_COLOUR('',#510798); +#511128 = OVER_RIDING_STYLED_ITEM('overriding color',(#511129),#98656, + #511072); +#511129 = PRESENTATION_STYLE_ASSIGNMENT((#511130)); +#511130 = SURFACE_STYLE_USAGE(.BOTH.,#511131); +#511131 = SURFACE_SIDE_STYLE('',(#511132)); +#511132 = SURFACE_STYLE_FILL_AREA(#511133); +#511133 = FILL_AREA_STYLE('',(#511134)); +#511134 = FILL_AREA_STYLE_COLOUR('',#510798); +#511135 = OVER_RIDING_STYLED_ITEM('overriding color',(#511136),#98673, + #511072); +#511136 = PRESENTATION_STYLE_ASSIGNMENT((#511137)); +#511137 = SURFACE_STYLE_USAGE(.BOTH.,#511138); +#511138 = SURFACE_SIDE_STYLE('',(#511139)); +#511139 = SURFACE_STYLE_FILL_AREA(#511140); +#511140 = FILL_AREA_STYLE('',(#511141)); +#511141 = FILL_AREA_STYLE_COLOUR('',#510798); +#511142 = OVER_RIDING_STYLED_ITEM('overriding color',(#511143),#98685, + #511072); +#511143 = PRESENTATION_STYLE_ASSIGNMENT((#511144)); +#511144 = SURFACE_STYLE_USAGE(.BOTH.,#511145); +#511145 = SURFACE_SIDE_STYLE('',(#511146)); +#511146 = SURFACE_STYLE_FILL_AREA(#511147); +#511147 = FILL_AREA_STYLE('',(#511148)); +#511148 = FILL_AREA_STYLE_COLOUR('',#510798); +#511149 = OVER_RIDING_STYLED_ITEM('overriding color',(#511150),#98707, + #511072); +#511150 = PRESENTATION_STYLE_ASSIGNMENT((#511151)); +#511151 = SURFACE_STYLE_USAGE(.BOTH.,#511152); +#511152 = SURFACE_SIDE_STYLE('',(#511153)); +#511153 = SURFACE_STYLE_FILL_AREA(#511154); +#511154 = FILL_AREA_STYLE('',(#511155)); +#511155 = FILL_AREA_STYLE_COLOUR('',#510798); +#511156 = OVER_RIDING_STYLED_ITEM('overriding color',(#511157),#98724, + #511072); +#511157 = PRESENTATION_STYLE_ASSIGNMENT((#511158)); +#511158 = SURFACE_STYLE_USAGE(.BOTH.,#511159); +#511159 = SURFACE_SIDE_STYLE('',(#511160)); +#511160 = SURFACE_STYLE_FILL_AREA(#511161); +#511161 = FILL_AREA_STYLE('',(#511162)); +#511162 = FILL_AREA_STYLE_COLOUR('',#510798); +#511163 = OVER_RIDING_STYLED_ITEM('overriding color',(#511164),#98741, + #511072); +#511164 = PRESENTATION_STYLE_ASSIGNMENT((#511165)); +#511165 = SURFACE_STYLE_USAGE(.BOTH.,#511166); +#511166 = SURFACE_SIDE_STYLE('',(#511167)); +#511167 = SURFACE_STYLE_FILL_AREA(#511168); +#511168 = FILL_AREA_STYLE('',(#511169)); +#511169 = FILL_AREA_STYLE_COLOUR('',#510798); +#511170 = OVER_RIDING_STYLED_ITEM('overriding color',(#511171),#98762, + #511072); +#511171 = PRESENTATION_STYLE_ASSIGNMENT((#511172)); +#511172 = SURFACE_STYLE_USAGE(.BOTH.,#511173); +#511173 = SURFACE_SIDE_STYLE('',(#511174)); +#511174 = SURFACE_STYLE_FILL_AREA(#511175); +#511175 = FILL_AREA_STYLE('',(#511176)); +#511176 = FILL_AREA_STYLE_COLOUR('',#510798); +#511177 = OVER_RIDING_STYLED_ITEM('overriding color',(#511178),#98783, + #511072); +#511178 = PRESENTATION_STYLE_ASSIGNMENT((#511179)); +#511179 = SURFACE_STYLE_USAGE(.BOTH.,#511180); +#511180 = SURFACE_SIDE_STYLE('',(#511181)); +#511181 = SURFACE_STYLE_FILL_AREA(#511182); +#511182 = FILL_AREA_STYLE('',(#511183)); +#511183 = FILL_AREA_STYLE_COLOUR('',#510798); +#511184 = OVER_RIDING_STYLED_ITEM('overriding color',(#511185),#98804, + #511072); +#511185 = PRESENTATION_STYLE_ASSIGNMENT((#511186)); +#511186 = SURFACE_STYLE_USAGE(.BOTH.,#511187); +#511187 = SURFACE_SIDE_STYLE('',(#511188)); +#511188 = SURFACE_STYLE_FILL_AREA(#511189); +#511189 = FILL_AREA_STYLE('',(#511190)); +#511190 = FILL_AREA_STYLE_COLOUR('',#510798); +#511191 = STYLED_ITEM('color',(#511192),#98820); +#511192 = PRESENTATION_STYLE_ASSIGNMENT((#511193)); +#511193 = SURFACE_STYLE_USAGE(.BOTH.,#511194); +#511194 = SURFACE_SIDE_STYLE('',(#511195)); +#511195 = SURFACE_STYLE_FILL_AREA(#511196); +#511196 = FILL_AREA_STYLE('',(#511197)); +#511197 = FILL_AREA_STYLE_COLOUR('',#506663); +#511198 = OVER_RIDING_STYLED_ITEM('overriding color',(#511199),#98822, + #511191); +#511199 = PRESENTATION_STYLE_ASSIGNMENT((#511200)); +#511200 = SURFACE_STYLE_USAGE(.BOTH.,#511201); +#511201 = SURFACE_SIDE_STYLE('',(#511202)); +#511202 = SURFACE_STYLE_FILL_AREA(#511203); +#511203 = FILL_AREA_STYLE('',(#511204)); +#511204 = FILL_AREA_STYLE_COLOUR('',#510798); +#511205 = OVER_RIDING_STYLED_ITEM('overriding color',(#511206),#98946, + #511191); +#511206 = PRESENTATION_STYLE_ASSIGNMENT((#511207)); +#511207 = SURFACE_STYLE_USAGE(.BOTH.,#511208); +#511208 = SURFACE_SIDE_STYLE('',(#511209)); +#511209 = SURFACE_STYLE_FILL_AREA(#511210); +#511210 = FILL_AREA_STYLE('',(#511211)); +#511211 = FILL_AREA_STYLE_COLOUR('',#510798); +#511212 = OVER_RIDING_STYLED_ITEM('overriding color',(#511213),#99070, + #511191); +#511213 = PRESENTATION_STYLE_ASSIGNMENT((#511214)); +#511214 = SURFACE_STYLE_USAGE(.BOTH.,#511215); +#511215 = SURFACE_SIDE_STYLE('',(#511216)); +#511216 = SURFACE_STYLE_FILL_AREA(#511217); +#511217 = FILL_AREA_STYLE('',(#511218)); +#511218 = FILL_AREA_STYLE_COLOUR('',#510798); +#511219 = OVER_RIDING_STYLED_ITEM('overriding color',(#511220),#99092, + #511191); +#511220 = PRESENTATION_STYLE_ASSIGNMENT((#511221)); +#511221 = SURFACE_STYLE_USAGE(.BOTH.,#511222); +#511222 = SURFACE_SIDE_STYLE('',(#511223)); +#511223 = SURFACE_STYLE_FILL_AREA(#511224); +#511224 = FILL_AREA_STYLE('',(#511225)); +#511225 = FILL_AREA_STYLE_COLOUR('',#510798); +#511226 = OVER_RIDING_STYLED_ITEM('overriding color',(#511227),#99109, + #511191); +#511227 = PRESENTATION_STYLE_ASSIGNMENT((#511228)); +#511228 = SURFACE_STYLE_USAGE(.BOTH.,#511229); +#511229 = SURFACE_SIDE_STYLE('',(#511230)); +#511230 = SURFACE_STYLE_FILL_AREA(#511231); +#511231 = FILL_AREA_STYLE('',(#511232)); +#511232 = FILL_AREA_STYLE_COLOUR('',#510798); +#511233 = OVER_RIDING_STYLED_ITEM('overriding color',(#511234),#99126, + #511191); +#511234 = PRESENTATION_STYLE_ASSIGNMENT((#511235)); +#511235 = SURFACE_STYLE_USAGE(.BOTH.,#511236); +#511236 = SURFACE_SIDE_STYLE('',(#511237)); +#511237 = SURFACE_STYLE_FILL_AREA(#511238); +#511238 = FILL_AREA_STYLE('',(#511239)); +#511239 = FILL_AREA_STYLE_COLOUR('',#510798); +#511240 = OVER_RIDING_STYLED_ITEM('overriding color',(#511241),#99143, + #511191); +#511241 = PRESENTATION_STYLE_ASSIGNMENT((#511242)); +#511242 = SURFACE_STYLE_USAGE(.BOTH.,#511243); +#511243 = SURFACE_SIDE_STYLE('',(#511244)); +#511244 = SURFACE_STYLE_FILL_AREA(#511245); +#511245 = FILL_AREA_STYLE('',(#511246)); +#511246 = FILL_AREA_STYLE_COLOUR('',#510798); +#511247 = OVER_RIDING_STYLED_ITEM('overriding color',(#511248),#99160, + #511191); +#511248 = PRESENTATION_STYLE_ASSIGNMENT((#511249)); +#511249 = SURFACE_STYLE_USAGE(.BOTH.,#511250); +#511250 = SURFACE_SIDE_STYLE('',(#511251)); +#511251 = SURFACE_STYLE_FILL_AREA(#511252); +#511252 = FILL_AREA_STYLE('',(#511253)); +#511253 = FILL_AREA_STYLE_COLOUR('',#510798); +#511254 = OVER_RIDING_STYLED_ITEM('overriding color',(#511255),#99177, + #511191); +#511255 = PRESENTATION_STYLE_ASSIGNMENT((#511256)); +#511256 = SURFACE_STYLE_USAGE(.BOTH.,#511257); +#511257 = SURFACE_SIDE_STYLE('',(#511258)); +#511258 = SURFACE_STYLE_FILL_AREA(#511259); +#511259 = FILL_AREA_STYLE('',(#511260)); +#511260 = FILL_AREA_STYLE_COLOUR('',#510798); +#511261 = OVER_RIDING_STYLED_ITEM('overriding color',(#511262),#99194, + #511191); +#511262 = PRESENTATION_STYLE_ASSIGNMENT((#511263)); +#511263 = SURFACE_STYLE_USAGE(.BOTH.,#511264); +#511264 = SURFACE_SIDE_STYLE('',(#511265)); +#511265 = SURFACE_STYLE_FILL_AREA(#511266); +#511266 = FILL_AREA_STYLE('',(#511267)); +#511267 = FILL_AREA_STYLE_COLOUR('',#510798); +#511268 = OVER_RIDING_STYLED_ITEM('overriding color',(#511269),#99206, + #511191); +#511269 = PRESENTATION_STYLE_ASSIGNMENT((#511270)); +#511270 = SURFACE_STYLE_USAGE(.BOTH.,#511271); +#511271 = SURFACE_SIDE_STYLE('',(#511272)); +#511272 = SURFACE_STYLE_FILL_AREA(#511273); +#511273 = FILL_AREA_STYLE('',(#511274)); +#511274 = FILL_AREA_STYLE_COLOUR('',#510798); +#511275 = OVER_RIDING_STYLED_ITEM('overriding color',(#511276),#99228, + #511191); +#511276 = PRESENTATION_STYLE_ASSIGNMENT((#511277)); +#511277 = SURFACE_STYLE_USAGE(.BOTH.,#511278); +#511278 = SURFACE_SIDE_STYLE('',(#511279)); +#511279 = SURFACE_STYLE_FILL_AREA(#511280); +#511280 = FILL_AREA_STYLE('',(#511281)); +#511281 = FILL_AREA_STYLE_COLOUR('',#510798); +#511282 = OVER_RIDING_STYLED_ITEM('overriding color',(#511283),#99245, + #511191); +#511283 = PRESENTATION_STYLE_ASSIGNMENT((#511284)); +#511284 = SURFACE_STYLE_USAGE(.BOTH.,#511285); +#511285 = SURFACE_SIDE_STYLE('',(#511286)); +#511286 = SURFACE_STYLE_FILL_AREA(#511287); +#511287 = FILL_AREA_STYLE('',(#511288)); +#511288 = FILL_AREA_STYLE_COLOUR('',#510798); +#511289 = OVER_RIDING_STYLED_ITEM('overriding color',(#511290),#99266, + #511191); +#511290 = PRESENTATION_STYLE_ASSIGNMENT((#511291)); +#511291 = SURFACE_STYLE_USAGE(.BOTH.,#511292); +#511292 = SURFACE_SIDE_STYLE('',(#511293)); +#511293 = SURFACE_STYLE_FILL_AREA(#511294); +#511294 = FILL_AREA_STYLE('',(#511295)); +#511295 = FILL_AREA_STYLE_COLOUR('',#510798); +#511296 = OVER_RIDING_STYLED_ITEM('overriding color',(#511297),#99283, + #511191); +#511297 = PRESENTATION_STYLE_ASSIGNMENT((#511298)); +#511298 = SURFACE_STYLE_USAGE(.BOTH.,#511299); +#511299 = SURFACE_SIDE_STYLE('',(#511300)); +#511300 = SURFACE_STYLE_FILL_AREA(#511301); +#511301 = FILL_AREA_STYLE('',(#511302)); +#511302 = FILL_AREA_STYLE_COLOUR('',#510798); +#511303 = OVER_RIDING_STYLED_ITEM('overriding color',(#511304),#99304, + #511191); +#511304 = PRESENTATION_STYLE_ASSIGNMENT((#511305)); +#511305 = SURFACE_STYLE_USAGE(.BOTH.,#511306); +#511306 = SURFACE_SIDE_STYLE('',(#511307)); +#511307 = SURFACE_STYLE_FILL_AREA(#511308); +#511308 = FILL_AREA_STYLE('',(#511309)); +#511309 = FILL_AREA_STYLE_COLOUR('',#510798); +#511310 = STYLED_ITEM('color',(#511311),#99316); +#511311 = PRESENTATION_STYLE_ASSIGNMENT((#511312)); +#511312 = SURFACE_STYLE_USAGE(.BOTH.,#511313); +#511313 = SURFACE_SIDE_STYLE('',(#511314)); +#511314 = SURFACE_STYLE_FILL_AREA(#511315); +#511315 = FILL_AREA_STYLE('',(#511316)); +#511316 = FILL_AREA_STYLE_COLOUR('',#506663); +#511317 = OVER_RIDING_STYLED_ITEM('overriding color',(#511318),#99318, + #511310); +#511318 = PRESENTATION_STYLE_ASSIGNMENT((#511319)); +#511319 = SURFACE_STYLE_USAGE(.BOTH.,#511320); +#511320 = SURFACE_SIDE_STYLE('',(#511321)); +#511321 = SURFACE_STYLE_FILL_AREA(#511322); +#511322 = FILL_AREA_STYLE('',(#511323)); +#511323 = FILL_AREA_STYLE_COLOUR('',#510798); +#511324 = OVER_RIDING_STYLED_ITEM('overriding color',(#511325),#99358, + #511310); +#511325 = PRESENTATION_STYLE_ASSIGNMENT((#511326)); +#511326 = SURFACE_STYLE_USAGE(.BOTH.,#511327); +#511327 = SURFACE_SIDE_STYLE('',(#511328)); +#511328 = SURFACE_STYLE_FILL_AREA(#511329); +#511329 = FILL_AREA_STYLE('',(#511330)); +#511330 = FILL_AREA_STYLE_COLOUR('',#510798); +#511331 = OVER_RIDING_STYLED_ITEM('overriding color',(#511332),#99389, + #511310); +#511332 = PRESENTATION_STYLE_ASSIGNMENT((#511333)); +#511333 = SURFACE_STYLE_USAGE(.BOTH.,#511334); +#511334 = SURFACE_SIDE_STYLE('',(#511335)); +#511335 = SURFACE_STYLE_FILL_AREA(#511336); +#511336 = FILL_AREA_STYLE('',(#511337)); +#511337 = FILL_AREA_STYLE_COLOUR('',#510798); +#511338 = OVER_RIDING_STYLED_ITEM('overriding color',(#511339),#99420, + #511310); +#511339 = PRESENTATION_STYLE_ASSIGNMENT((#511340)); +#511340 = SURFACE_STYLE_USAGE(.BOTH.,#511341); +#511341 = SURFACE_SIDE_STYLE('',(#511342)); +#511342 = SURFACE_STYLE_FILL_AREA(#511343); +#511343 = FILL_AREA_STYLE('',(#511344)); +#511344 = FILL_AREA_STYLE_COLOUR('',#510798); +#511345 = OVER_RIDING_STYLED_ITEM('overriding color',(#511346),#99451, + #511310); +#511346 = PRESENTATION_STYLE_ASSIGNMENT((#511347)); +#511347 = SURFACE_STYLE_USAGE(.BOTH.,#511348); +#511348 = SURFACE_SIDE_STYLE('',(#511349)); +#511349 = SURFACE_STYLE_FILL_AREA(#511350); +#511350 = FILL_AREA_STYLE('',(#511351)); +#511351 = FILL_AREA_STYLE_COLOUR('',#510798); +#511352 = OVER_RIDING_STYLED_ITEM('overriding color',(#511353),#99482, + #511310); +#511353 = PRESENTATION_STYLE_ASSIGNMENT((#511354)); +#511354 = SURFACE_STYLE_USAGE(.BOTH.,#511355); +#511355 = SURFACE_SIDE_STYLE('',(#511356)); +#511356 = SURFACE_STYLE_FILL_AREA(#511357); +#511357 = FILL_AREA_STYLE('',(#511358)); +#511358 = FILL_AREA_STYLE_COLOUR('',#510798); +#511359 = OVER_RIDING_STYLED_ITEM('overriding color',(#511360),#99513, + #511310); +#511360 = PRESENTATION_STYLE_ASSIGNMENT((#511361)); +#511361 = SURFACE_STYLE_USAGE(.BOTH.,#511362); +#511362 = SURFACE_SIDE_STYLE('',(#511363)); +#511363 = SURFACE_STYLE_FILL_AREA(#511364); +#511364 = FILL_AREA_STYLE('',(#511365)); +#511365 = FILL_AREA_STYLE_COLOUR('',#510798); +#511366 = OVER_RIDING_STYLED_ITEM('overriding color',(#511367),#99544, + #511310); +#511367 = PRESENTATION_STYLE_ASSIGNMENT((#511368)); +#511368 = SURFACE_STYLE_USAGE(.BOTH.,#511369); +#511369 = SURFACE_SIDE_STYLE('',(#511370)); +#511370 = SURFACE_STYLE_FILL_AREA(#511371); +#511371 = FILL_AREA_STYLE('',(#511372)); +#511372 = FILL_AREA_STYLE_COLOUR('',#510798); +#511373 = OVER_RIDING_STYLED_ITEM('overriding color',(#511374),#99575, + #511310); +#511374 = PRESENTATION_STYLE_ASSIGNMENT((#511375)); +#511375 = SURFACE_STYLE_USAGE(.BOTH.,#511376); +#511376 = SURFACE_SIDE_STYLE('',(#511377)); +#511377 = SURFACE_STYLE_FILL_AREA(#511378); +#511378 = FILL_AREA_STYLE('',(#511379)); +#511379 = FILL_AREA_STYLE_COLOUR('',#510798); +#511380 = OVER_RIDING_STYLED_ITEM('overriding color',(#511381),#99606, + #511310); +#511381 = PRESENTATION_STYLE_ASSIGNMENT((#511382)); +#511382 = SURFACE_STYLE_USAGE(.BOTH.,#511383); +#511383 = SURFACE_SIDE_STYLE('',(#511384)); +#511384 = SURFACE_STYLE_FILL_AREA(#511385); +#511385 = FILL_AREA_STYLE('',(#511386)); +#511386 = FILL_AREA_STYLE_COLOUR('',#510798); +#511387 = OVER_RIDING_STYLED_ITEM('overriding color',(#511388),#99637, + #511310); +#511388 = PRESENTATION_STYLE_ASSIGNMENT((#511389)); +#511389 = SURFACE_STYLE_USAGE(.BOTH.,#511390); +#511390 = SURFACE_SIDE_STYLE('',(#511391)); +#511391 = SURFACE_STYLE_FILL_AREA(#511392); +#511392 = FILL_AREA_STYLE('',(#511393)); +#511393 = FILL_AREA_STYLE_COLOUR('',#510798); +#511394 = OVER_RIDING_STYLED_ITEM('overriding color',(#511395),#99668, + #511310); +#511395 = PRESENTATION_STYLE_ASSIGNMENT((#511396)); +#511396 = SURFACE_STYLE_USAGE(.BOTH.,#511397); +#511397 = SURFACE_SIDE_STYLE('',(#511398)); +#511398 = SURFACE_STYLE_FILL_AREA(#511399); +#511399 = FILL_AREA_STYLE('',(#511400)); +#511400 = FILL_AREA_STYLE_COLOUR('',#510798); +#511401 = OVER_RIDING_STYLED_ITEM('overriding color',(#511402),#99690, + #511310); +#511402 = PRESENTATION_STYLE_ASSIGNMENT((#511403)); +#511403 = SURFACE_STYLE_USAGE(.BOTH.,#511404); +#511404 = SURFACE_SIDE_STYLE('',(#511405)); +#511405 = SURFACE_STYLE_FILL_AREA(#511406); +#511406 = FILL_AREA_STYLE('',(#511407)); +#511407 = FILL_AREA_STYLE_COLOUR('',#510798); +#511408 = OVER_RIDING_STYLED_ITEM('overriding color',(#511409),#99710, + #511310); +#511409 = PRESENTATION_STYLE_ASSIGNMENT((#511410)); +#511410 = SURFACE_STYLE_USAGE(.BOTH.,#511411); +#511411 = SURFACE_SIDE_STYLE('',(#511412)); +#511412 = SURFACE_STYLE_FILL_AREA(#511413); +#511413 = FILL_AREA_STYLE('',(#511414)); +#511414 = FILL_AREA_STYLE_COLOUR('',#510798); +#511415 = STYLED_ITEM('color',(#511416),#99730); +#511416 = PRESENTATION_STYLE_ASSIGNMENT((#511417)); +#511417 = SURFACE_STYLE_USAGE(.BOTH.,#511418); +#511418 = SURFACE_SIDE_STYLE('',(#511419)); +#511419 = SURFACE_STYLE_FILL_AREA(#511420); +#511420 = FILL_AREA_STYLE('',(#511421)); +#511421 = FILL_AREA_STYLE_COLOUR('',#506663); +#511422 = OVER_RIDING_STYLED_ITEM('overriding color',(#511423),#99732, + #511415); +#511423 = PRESENTATION_STYLE_ASSIGNMENT((#511424)); +#511424 = SURFACE_STYLE_USAGE(.BOTH.,#511425); +#511425 = SURFACE_SIDE_STYLE('',(#511426)); +#511426 = SURFACE_STYLE_FILL_AREA(#511427); +#511427 = FILL_AREA_STYLE('',(#511428)); +#511428 = FILL_AREA_STYLE_COLOUR('',#510798); +#511429 = OVER_RIDING_STYLED_ITEM('overriding color',(#511430),#99932, + #511415); +#511430 = PRESENTATION_STYLE_ASSIGNMENT((#511431)); +#511431 = SURFACE_STYLE_USAGE(.BOTH.,#511432); +#511432 = SURFACE_SIDE_STYLE('',(#511433)); +#511433 = SURFACE_STYLE_FILL_AREA(#511434); +#511434 = FILL_AREA_STYLE('',(#511435)); +#511435 = FILL_AREA_STYLE_COLOUR('',#510798); +#511436 = OVER_RIDING_STYLED_ITEM('overriding color',(#511437),#100132, + #511415); +#511437 = PRESENTATION_STYLE_ASSIGNMENT((#511438)); +#511438 = SURFACE_STYLE_USAGE(.BOTH.,#511439); +#511439 = SURFACE_SIDE_STYLE('',(#511440)); +#511440 = SURFACE_STYLE_FILL_AREA(#511441); +#511441 = FILL_AREA_STYLE('',(#511442)); +#511442 = FILL_AREA_STYLE_COLOUR('',#510798); +#511443 = OVER_RIDING_STYLED_ITEM('overriding color',(#511444),#100158, + #511415); +#511444 = PRESENTATION_STYLE_ASSIGNMENT((#511445)); +#511445 = SURFACE_STYLE_USAGE(.BOTH.,#511446); +#511446 = SURFACE_SIDE_STYLE('',(#511447)); +#511447 = SURFACE_STYLE_FILL_AREA(#511448); +#511448 = FILL_AREA_STYLE('',(#511449)); +#511449 = FILL_AREA_STYLE_COLOUR('',#510798); +#511450 = OVER_RIDING_STYLED_ITEM('overriding color',(#511451),#100175, + #511415); +#511451 = PRESENTATION_STYLE_ASSIGNMENT((#511452)); +#511452 = SURFACE_STYLE_USAGE(.BOTH.,#511453); +#511453 = SURFACE_SIDE_STYLE('',(#511454)); +#511454 = SURFACE_STYLE_FILL_AREA(#511455); +#511455 = FILL_AREA_STYLE('',(#511456)); +#511456 = FILL_AREA_STYLE_COLOUR('',#510798); +#511457 = OVER_RIDING_STYLED_ITEM('overriding color',(#511458),#100196, + #511415); +#511458 = PRESENTATION_STYLE_ASSIGNMENT((#511459)); +#511459 = SURFACE_STYLE_USAGE(.BOTH.,#511460); +#511460 = SURFACE_SIDE_STYLE('',(#511461)); +#511461 = SURFACE_STYLE_FILL_AREA(#511462); +#511462 = FILL_AREA_STYLE('',(#511463)); +#511463 = FILL_AREA_STYLE_COLOUR('',#510798); +#511464 = OVER_RIDING_STYLED_ITEM('overriding color',(#511465),#100217, + #511415); +#511465 = PRESENTATION_STYLE_ASSIGNMENT((#511466)); +#511466 = SURFACE_STYLE_USAGE(.BOTH.,#511467); +#511467 = SURFACE_SIDE_STYLE('',(#511468)); +#511468 = SURFACE_STYLE_FILL_AREA(#511469); +#511469 = FILL_AREA_STYLE('',(#511470)); +#511470 = FILL_AREA_STYLE_COLOUR('',#510798); +#511471 = OVER_RIDING_STYLED_ITEM('overriding color',(#511472),#100234, + #511415); +#511472 = PRESENTATION_STYLE_ASSIGNMENT((#511473)); +#511473 = SURFACE_STYLE_USAGE(.BOTH.,#511474); +#511474 = SURFACE_SIDE_STYLE('',(#511475)); +#511475 = SURFACE_STYLE_FILL_AREA(#511476); +#511476 = FILL_AREA_STYLE('',(#511477)); +#511477 = FILL_AREA_STYLE_COLOUR('',#510798); +#511478 = OVER_RIDING_STYLED_ITEM('overriding color',(#511479),#100255, + #511415); +#511479 = PRESENTATION_STYLE_ASSIGNMENT((#511480)); +#511480 = SURFACE_STYLE_USAGE(.BOTH.,#511481); +#511481 = SURFACE_SIDE_STYLE('',(#511482)); +#511482 = SURFACE_STYLE_FILL_AREA(#511483); +#511483 = FILL_AREA_STYLE('',(#511484)); +#511484 = FILL_AREA_STYLE_COLOUR('',#510798); +#511485 = OVER_RIDING_STYLED_ITEM('overriding color',(#511486),#100276, + #511415); +#511486 = PRESENTATION_STYLE_ASSIGNMENT((#511487)); +#511487 = SURFACE_STYLE_USAGE(.BOTH.,#511488); +#511488 = SURFACE_SIDE_STYLE('',(#511489)); +#511489 = SURFACE_STYLE_FILL_AREA(#511490); +#511490 = FILL_AREA_STYLE('',(#511491)); +#511491 = FILL_AREA_STYLE_COLOUR('',#510798); +#511492 = OVER_RIDING_STYLED_ITEM('overriding color',(#511493),#100297, + #511415); +#511493 = PRESENTATION_STYLE_ASSIGNMENT((#511494)); +#511494 = SURFACE_STYLE_USAGE(.BOTH.,#511495); +#511495 = SURFACE_SIDE_STYLE('',(#511496)); +#511496 = SURFACE_STYLE_FILL_AREA(#511497); +#511497 = FILL_AREA_STYLE('',(#511498)); +#511498 = FILL_AREA_STYLE_COLOUR('',#510798); +#511499 = OVER_RIDING_STYLED_ITEM('overriding color',(#511500),#100318, + #511415); +#511500 = PRESENTATION_STYLE_ASSIGNMENT((#511501)); +#511501 = SURFACE_STYLE_USAGE(.BOTH.,#511502); +#511502 = SURFACE_SIDE_STYLE('',(#511503)); +#511503 = SURFACE_STYLE_FILL_AREA(#511504); +#511504 = FILL_AREA_STYLE('',(#511505)); +#511505 = FILL_AREA_STYLE_COLOUR('',#510798); +#511506 = OVER_RIDING_STYLED_ITEM('overriding color',(#511507),#100335, + #511415); +#511507 = PRESENTATION_STYLE_ASSIGNMENT((#511508)); +#511508 = SURFACE_STYLE_USAGE(.BOTH.,#511509); +#511509 = SURFACE_SIDE_STYLE('',(#511510)); +#511510 = SURFACE_STYLE_FILL_AREA(#511511); +#511511 = FILL_AREA_STYLE('',(#511512)); +#511512 = FILL_AREA_STYLE_COLOUR('',#510798); +#511513 = OVER_RIDING_STYLED_ITEM('overriding color',(#511514),#100352, + #511415); +#511514 = PRESENTATION_STYLE_ASSIGNMENT((#511515)); +#511515 = SURFACE_STYLE_USAGE(.BOTH.,#511516); +#511516 = SURFACE_SIDE_STYLE('',(#511517)); +#511517 = SURFACE_STYLE_FILL_AREA(#511518); +#511518 = FILL_AREA_STYLE('',(#511519)); +#511519 = FILL_AREA_STYLE_COLOUR('',#510798); +#511520 = OVER_RIDING_STYLED_ITEM('overriding color',(#511521),#100369, + #511415); +#511521 = PRESENTATION_STYLE_ASSIGNMENT((#511522)); +#511522 = SURFACE_STYLE_USAGE(.BOTH.,#511523); +#511523 = SURFACE_SIDE_STYLE('',(#511524)); +#511524 = SURFACE_STYLE_FILL_AREA(#511525); +#511525 = FILL_AREA_STYLE('',(#511526)); +#511526 = FILL_AREA_STYLE_COLOUR('',#510798); +#511527 = OVER_RIDING_STYLED_ITEM('overriding color',(#511528),#100386, + #511415); +#511528 = PRESENTATION_STYLE_ASSIGNMENT((#511529)); +#511529 = SURFACE_STYLE_USAGE(.BOTH.,#511530); +#511530 = SURFACE_SIDE_STYLE('',(#511531)); +#511531 = SURFACE_STYLE_FILL_AREA(#511532); +#511532 = FILL_AREA_STYLE('',(#511533)); +#511533 = FILL_AREA_STYLE_COLOUR('',#510798); +#511534 = OVER_RIDING_STYLED_ITEM('overriding color',(#511535),#100402, + #511415); +#511535 = PRESENTATION_STYLE_ASSIGNMENT((#511536)); +#511536 = SURFACE_STYLE_USAGE(.BOTH.,#511537); +#511537 = SURFACE_SIDE_STYLE('',(#511538)); +#511538 = SURFACE_STYLE_FILL_AREA(#511539); +#511539 = FILL_AREA_STYLE('',(#511540)); +#511540 = FILL_AREA_STYLE_COLOUR('',#510798); +#511541 = OVER_RIDING_STYLED_ITEM('overriding color',(#511542),#100428, + #511415); +#511542 = PRESENTATION_STYLE_ASSIGNMENT((#511543)); +#511543 = SURFACE_STYLE_USAGE(.BOTH.,#511544); +#511544 = SURFACE_SIDE_STYLE('',(#511545)); +#511545 = SURFACE_STYLE_FILL_AREA(#511546); +#511546 = FILL_AREA_STYLE('',(#511547)); +#511547 = FILL_AREA_STYLE_COLOUR('',#510798); +#511548 = OVER_RIDING_STYLED_ITEM('overriding color',(#511549),#100449, + #511415); +#511549 = PRESENTATION_STYLE_ASSIGNMENT((#511550)); +#511550 = SURFACE_STYLE_USAGE(.BOTH.,#511551); +#511551 = SURFACE_SIDE_STYLE('',(#511552)); +#511552 = SURFACE_STYLE_FILL_AREA(#511553); +#511553 = FILL_AREA_STYLE('',(#511554)); +#511554 = FILL_AREA_STYLE_COLOUR('',#510798); +#511555 = OVER_RIDING_STYLED_ITEM('overriding color',(#511556),#100470, + #511415); +#511556 = PRESENTATION_STYLE_ASSIGNMENT((#511557)); +#511557 = SURFACE_STYLE_USAGE(.BOTH.,#511558); +#511558 = SURFACE_SIDE_STYLE('',(#511559)); +#511559 = SURFACE_STYLE_FILL_AREA(#511560); +#511560 = FILL_AREA_STYLE('',(#511561)); +#511561 = FILL_AREA_STYLE_COLOUR('',#510798); +#511562 = OVER_RIDING_STYLED_ITEM('overriding color',(#511563),#100491, + #511415); +#511563 = PRESENTATION_STYLE_ASSIGNMENT((#511564)); +#511564 = SURFACE_STYLE_USAGE(.BOTH.,#511565); +#511565 = SURFACE_SIDE_STYLE('',(#511566)); +#511566 = SURFACE_STYLE_FILL_AREA(#511567); +#511567 = FILL_AREA_STYLE('',(#511568)); +#511568 = FILL_AREA_STYLE_COLOUR('',#510798); +#511569 = OVER_RIDING_STYLED_ITEM('overriding color',(#511570),#100512, + #511415); +#511570 = PRESENTATION_STYLE_ASSIGNMENT((#511571)); +#511571 = SURFACE_STYLE_USAGE(.BOTH.,#511572); +#511572 = SURFACE_SIDE_STYLE('',(#511573)); +#511573 = SURFACE_STYLE_FILL_AREA(#511574); +#511574 = FILL_AREA_STYLE('',(#511575)); +#511575 = FILL_AREA_STYLE_COLOUR('',#510798); +#511576 = OVER_RIDING_STYLED_ITEM('overriding color',(#511577),#100533, + #511415); +#511577 = PRESENTATION_STYLE_ASSIGNMENT((#511578)); +#511578 = SURFACE_STYLE_USAGE(.BOTH.,#511579); +#511579 = SURFACE_SIDE_STYLE('',(#511580)); +#511580 = SURFACE_STYLE_FILL_AREA(#511581); +#511581 = FILL_AREA_STYLE('',(#511582)); +#511582 = FILL_AREA_STYLE_COLOUR('',#510798); +#511583 = OVER_RIDING_STYLED_ITEM('overriding color',(#511584),#100550, + #511415); +#511584 = PRESENTATION_STYLE_ASSIGNMENT((#511585)); +#511585 = SURFACE_STYLE_USAGE(.BOTH.,#511586); +#511586 = SURFACE_SIDE_STYLE('',(#511587)); +#511587 = SURFACE_STYLE_FILL_AREA(#511588); +#511588 = FILL_AREA_STYLE('',(#511589)); +#511589 = FILL_AREA_STYLE_COLOUR('',#510798); +#511590 = STYLED_ITEM('color',(#511591),#100562); +#511591 = PRESENTATION_STYLE_ASSIGNMENT((#511592)); +#511592 = SURFACE_STYLE_USAGE(.BOTH.,#511593); +#511593 = SURFACE_SIDE_STYLE('',(#511594)); +#511594 = SURFACE_STYLE_FILL_AREA(#511595); +#511595 = FILL_AREA_STYLE('',(#511596)); +#511596 = FILL_AREA_STYLE_COLOUR('',#506663); +#511597 = OVER_RIDING_STYLED_ITEM('overriding color',(#511598),#100564, + #511590); +#511598 = PRESENTATION_STYLE_ASSIGNMENT((#511599)); +#511599 = SURFACE_STYLE_USAGE(.BOTH.,#511600); +#511600 = SURFACE_SIDE_STYLE('',(#511601)); +#511601 = SURFACE_STYLE_FILL_AREA(#511602); +#511602 = FILL_AREA_STYLE('',(#511603)); +#511603 = FILL_AREA_STYLE_COLOUR('',#510798); +#511604 = OVER_RIDING_STYLED_ITEM('overriding color',(#511605),#100610, + #511590); +#511605 = PRESENTATION_STYLE_ASSIGNMENT((#511606)); +#511606 = SURFACE_STYLE_USAGE(.BOTH.,#511607); +#511607 = SURFACE_SIDE_STYLE('',(#511608)); +#511608 = SURFACE_STYLE_FILL_AREA(#511609); +#511609 = FILL_AREA_STYLE('',(#511610)); +#511610 = FILL_AREA_STYLE_COLOUR('',#510798); +#511611 = OVER_RIDING_STYLED_ITEM('overriding color',(#511612),#100641, + #511590); +#511612 = PRESENTATION_STYLE_ASSIGNMENT((#511613)); +#511613 = SURFACE_STYLE_USAGE(.BOTH.,#511614); +#511614 = SURFACE_SIDE_STYLE('',(#511615)); +#511615 = SURFACE_STYLE_FILL_AREA(#511616); +#511616 = FILL_AREA_STYLE('',(#511617)); +#511617 = FILL_AREA_STYLE_COLOUR('',#510798); +#511618 = OVER_RIDING_STYLED_ITEM('overriding color',(#511619),#100678, + #511590); +#511619 = PRESENTATION_STYLE_ASSIGNMENT((#511620)); +#511620 = SURFACE_STYLE_USAGE(.BOTH.,#511621); +#511621 = SURFACE_SIDE_STYLE('',(#511622)); +#511622 = SURFACE_STYLE_FILL_AREA(#511623); +#511623 = FILL_AREA_STYLE('',(#511624)); +#511624 = FILL_AREA_STYLE_COLOUR('',#510798); +#511625 = OVER_RIDING_STYLED_ITEM('overriding color',(#511626),#100715, + #511590); +#511626 = PRESENTATION_STYLE_ASSIGNMENT((#511627)); +#511627 = SURFACE_STYLE_USAGE(.BOTH.,#511628); +#511628 = SURFACE_SIDE_STYLE('',(#511629)); +#511629 = SURFACE_STYLE_FILL_AREA(#511630); +#511630 = FILL_AREA_STYLE('',(#511631)); +#511631 = FILL_AREA_STYLE_COLOUR('',#510798); +#511632 = OVER_RIDING_STYLED_ITEM('overriding color',(#511633),#100752, + #511590); +#511633 = PRESENTATION_STYLE_ASSIGNMENT((#511634)); +#511634 = SURFACE_STYLE_USAGE(.BOTH.,#511635); +#511635 = SURFACE_SIDE_STYLE('',(#511636)); +#511636 = SURFACE_STYLE_FILL_AREA(#511637); +#511637 = FILL_AREA_STYLE('',(#511638)); +#511638 = FILL_AREA_STYLE_COLOUR('',#510798); +#511639 = OVER_RIDING_STYLED_ITEM('overriding color',(#511640),#100789, + #511590); +#511640 = PRESENTATION_STYLE_ASSIGNMENT((#511641)); +#511641 = SURFACE_STYLE_USAGE(.BOTH.,#511642); +#511642 = SURFACE_SIDE_STYLE('',(#511643)); +#511643 = SURFACE_STYLE_FILL_AREA(#511644); +#511644 = FILL_AREA_STYLE('',(#511645)); +#511645 = FILL_AREA_STYLE_COLOUR('',#510798); +#511646 = OVER_RIDING_STYLED_ITEM('overriding color',(#511647),#100826, + #511590); +#511647 = PRESENTATION_STYLE_ASSIGNMENT((#511648)); +#511648 = SURFACE_STYLE_USAGE(.BOTH.,#511649); +#511649 = SURFACE_SIDE_STYLE('',(#511650)); +#511650 = SURFACE_STYLE_FILL_AREA(#511651); +#511651 = FILL_AREA_STYLE('',(#511652)); +#511652 = FILL_AREA_STYLE_COLOUR('',#510798); +#511653 = OVER_RIDING_STYLED_ITEM('overriding color',(#511654),#100863, + #511590); +#511654 = PRESENTATION_STYLE_ASSIGNMENT((#511655)); +#511655 = SURFACE_STYLE_USAGE(.BOTH.,#511656); +#511656 = SURFACE_SIDE_STYLE('',(#511657)); +#511657 = SURFACE_STYLE_FILL_AREA(#511658); +#511658 = FILL_AREA_STYLE('',(#511659)); +#511659 = FILL_AREA_STYLE_COLOUR('',#510798); +#511660 = OVER_RIDING_STYLED_ITEM('overriding color',(#511661),#100900, + #511590); +#511661 = PRESENTATION_STYLE_ASSIGNMENT((#511662)); +#511662 = SURFACE_STYLE_USAGE(.BOTH.,#511663); +#511663 = SURFACE_SIDE_STYLE('',(#511664)); +#511664 = SURFACE_STYLE_FILL_AREA(#511665); +#511665 = FILL_AREA_STYLE('',(#511666)); +#511666 = FILL_AREA_STYLE_COLOUR('',#510798); +#511667 = OVER_RIDING_STYLED_ITEM('overriding color',(#511668),#100937, + #511590); +#511668 = PRESENTATION_STYLE_ASSIGNMENT((#511669)); +#511669 = SURFACE_STYLE_USAGE(.BOTH.,#511670); +#511670 = SURFACE_SIDE_STYLE('',(#511671)); +#511671 = SURFACE_STYLE_FILL_AREA(#511672); +#511672 = FILL_AREA_STYLE('',(#511673)); +#511673 = FILL_AREA_STYLE_COLOUR('',#510798); +#511674 = OVER_RIDING_STYLED_ITEM('overriding color',(#511675),#100974, + #511590); +#511675 = PRESENTATION_STYLE_ASSIGNMENT((#511676)); +#511676 = SURFACE_STYLE_USAGE(.BOTH.,#511677); +#511677 = SURFACE_SIDE_STYLE('',(#511678)); +#511678 = SURFACE_STYLE_FILL_AREA(#511679); +#511679 = FILL_AREA_STYLE('',(#511680)); +#511680 = FILL_AREA_STYLE_COLOUR('',#510798); +#511681 = OVER_RIDING_STYLED_ITEM('overriding color',(#511682),#101011, + #511590); +#511682 = PRESENTATION_STYLE_ASSIGNMENT((#511683)); +#511683 = SURFACE_STYLE_USAGE(.BOTH.,#511684); +#511684 = SURFACE_SIDE_STYLE('',(#511685)); +#511685 = SURFACE_STYLE_FILL_AREA(#511686); +#511686 = FILL_AREA_STYLE('',(#511687)); +#511687 = FILL_AREA_STYLE_COLOUR('',#510798); +#511688 = OVER_RIDING_STYLED_ITEM('overriding color',(#511689),#101042, + #511590); +#511689 = PRESENTATION_STYLE_ASSIGNMENT((#511690)); +#511690 = SURFACE_STYLE_USAGE(.BOTH.,#511691); +#511691 = SURFACE_SIDE_STYLE('',(#511692)); +#511692 = SURFACE_STYLE_FILL_AREA(#511693); +#511693 = FILL_AREA_STYLE('',(#511694)); +#511694 = FILL_AREA_STYLE_COLOUR('',#510798); +#511695 = OVER_RIDING_STYLED_ITEM('overriding color',(#511696),#101079, + #511590); +#511696 = PRESENTATION_STYLE_ASSIGNMENT((#511697)); +#511697 = SURFACE_STYLE_USAGE(.BOTH.,#511698); +#511698 = SURFACE_SIDE_STYLE('',(#511699)); +#511699 = SURFACE_STYLE_FILL_AREA(#511700); +#511700 = FILL_AREA_STYLE('',(#511701)); +#511701 = FILL_AREA_STYLE_COLOUR('',#510798); +#511702 = OVER_RIDING_STYLED_ITEM('overriding color',(#511703),#101116, + #511590); +#511703 = PRESENTATION_STYLE_ASSIGNMENT((#511704)); +#511704 = SURFACE_STYLE_USAGE(.BOTH.,#511705); +#511705 = SURFACE_SIDE_STYLE('',(#511706)); +#511706 = SURFACE_STYLE_FILL_AREA(#511707); +#511707 = FILL_AREA_STYLE('',(#511708)); +#511708 = FILL_AREA_STYLE_COLOUR('',#510798); +#511709 = OVER_RIDING_STYLED_ITEM('overriding color',(#511710),#101153, + #511590); +#511710 = PRESENTATION_STYLE_ASSIGNMENT((#511711)); +#511711 = SURFACE_STYLE_USAGE(.BOTH.,#511712); +#511712 = SURFACE_SIDE_STYLE('',(#511713)); +#511713 = SURFACE_STYLE_FILL_AREA(#511714); +#511714 = FILL_AREA_STYLE('',(#511715)); +#511715 = FILL_AREA_STYLE_COLOUR('',#510798); +#511716 = OVER_RIDING_STYLED_ITEM('overriding color',(#511717),#101190, + #511590); +#511717 = PRESENTATION_STYLE_ASSIGNMENT((#511718)); +#511718 = SURFACE_STYLE_USAGE(.BOTH.,#511719); +#511719 = SURFACE_SIDE_STYLE('',(#511720)); +#511720 = SURFACE_STYLE_FILL_AREA(#511721); +#511721 = FILL_AREA_STYLE('',(#511722)); +#511722 = FILL_AREA_STYLE_COLOUR('',#510798); +#511723 = OVER_RIDING_STYLED_ITEM('overriding color',(#511724),#101227, + #511590); +#511724 = PRESENTATION_STYLE_ASSIGNMENT((#511725)); +#511725 = SURFACE_STYLE_USAGE(.BOTH.,#511726); +#511726 = SURFACE_SIDE_STYLE('',(#511727)); +#511727 = SURFACE_STYLE_FILL_AREA(#511728); +#511728 = FILL_AREA_STYLE('',(#511729)); +#511729 = FILL_AREA_STYLE_COLOUR('',#510798); +#511730 = OVER_RIDING_STYLED_ITEM('overriding color',(#511731),#101264, + #511590); +#511731 = PRESENTATION_STYLE_ASSIGNMENT((#511732)); +#511732 = SURFACE_STYLE_USAGE(.BOTH.,#511733); +#511733 = SURFACE_SIDE_STYLE('',(#511734)); +#511734 = SURFACE_STYLE_FILL_AREA(#511735); +#511735 = FILL_AREA_STYLE('',(#511736)); +#511736 = FILL_AREA_STYLE_COLOUR('',#510798); +#511737 = OVER_RIDING_STYLED_ITEM('overriding color',(#511738),#101301, + #511590); +#511738 = PRESENTATION_STYLE_ASSIGNMENT((#511739)); +#511739 = SURFACE_STYLE_USAGE(.BOTH.,#511740); +#511740 = SURFACE_SIDE_STYLE('',(#511741)); +#511741 = SURFACE_STYLE_FILL_AREA(#511742); +#511742 = FILL_AREA_STYLE('',(#511743)); +#511743 = FILL_AREA_STYLE_COLOUR('',#510798); +#511744 = OVER_RIDING_STYLED_ITEM('overriding color',(#511745),#101329, + #511590); +#511745 = PRESENTATION_STYLE_ASSIGNMENT((#511746)); +#511746 = SURFACE_STYLE_USAGE(.BOTH.,#511747); +#511747 = SURFACE_SIDE_STYLE('',(#511748)); +#511748 = SURFACE_STYLE_FILL_AREA(#511749); +#511749 = FILL_AREA_STYLE('',(#511750)); +#511750 = FILL_AREA_STYLE_COLOUR('',#510798); +#511751 = OVER_RIDING_STYLED_ITEM('overriding color',(#511752),#101358, + #511590); +#511752 = PRESENTATION_STYLE_ASSIGNMENT((#511753)); +#511753 = SURFACE_STYLE_USAGE(.BOTH.,#511754); +#511754 = SURFACE_SIDE_STYLE('',(#511755)); +#511755 = SURFACE_STYLE_FILL_AREA(#511756); +#511756 = FILL_AREA_STYLE('',(#511757)); +#511757 = FILL_AREA_STYLE_COLOUR('',#510798); +#511758 = STYLED_ITEM('color',(#511759),#101387); +#511759 = PRESENTATION_STYLE_ASSIGNMENT((#511760)); +#511760 = SURFACE_STYLE_USAGE(.BOTH.,#511761); +#511761 = SURFACE_SIDE_STYLE('',(#511762)); +#511762 = SURFACE_STYLE_FILL_AREA(#511763); +#511763 = FILL_AREA_STYLE('',(#511764)); +#511764 = FILL_AREA_STYLE_COLOUR('',#506663); +#511765 = OVER_RIDING_STYLED_ITEM('overriding color',(#511766),#101389, + #511758); +#511766 = PRESENTATION_STYLE_ASSIGNMENT((#511767)); +#511767 = SURFACE_STYLE_USAGE(.BOTH.,#511768); +#511768 = SURFACE_SIDE_STYLE('',(#511769)); +#511769 = SURFACE_STYLE_FILL_AREA(#511770); +#511770 = FILL_AREA_STYLE('',(#511771)); +#511771 = FILL_AREA_STYLE_COLOUR('',#510798); +#511772 = OVER_RIDING_STYLED_ITEM('overriding color',(#511773),#101429, + #511758); +#511773 = PRESENTATION_STYLE_ASSIGNMENT((#511774)); +#511774 = SURFACE_STYLE_USAGE(.BOTH.,#511775); +#511775 = SURFACE_SIDE_STYLE('',(#511776)); +#511776 = SURFACE_STYLE_FILL_AREA(#511777); +#511777 = FILL_AREA_STYLE('',(#511778)); +#511778 = FILL_AREA_STYLE_COLOUR('',#510798); +#511779 = OVER_RIDING_STYLED_ITEM('overriding color',(#511780),#101460, + #511758); +#511780 = PRESENTATION_STYLE_ASSIGNMENT((#511781)); +#511781 = SURFACE_STYLE_USAGE(.BOTH.,#511782); +#511782 = SURFACE_SIDE_STYLE('',(#511783)); +#511783 = SURFACE_STYLE_FILL_AREA(#511784); +#511784 = FILL_AREA_STYLE('',(#511785)); +#511785 = FILL_AREA_STYLE_COLOUR('',#510798); +#511786 = OVER_RIDING_STYLED_ITEM('overriding color',(#511787),#101497, + #511758); +#511787 = PRESENTATION_STYLE_ASSIGNMENT((#511788)); +#511788 = SURFACE_STYLE_USAGE(.BOTH.,#511789); +#511789 = SURFACE_SIDE_STYLE('',(#511790)); +#511790 = SURFACE_STYLE_FILL_AREA(#511791); +#511791 = FILL_AREA_STYLE('',(#511792)); +#511792 = FILL_AREA_STYLE_COLOUR('',#510798); +#511793 = OVER_RIDING_STYLED_ITEM('overriding color',(#511794),#101528, + #511758); +#511794 = PRESENTATION_STYLE_ASSIGNMENT((#511795)); +#511795 = SURFACE_STYLE_USAGE(.BOTH.,#511796); +#511796 = SURFACE_SIDE_STYLE('',(#511797)); +#511797 = SURFACE_STYLE_FILL_AREA(#511798); +#511798 = FILL_AREA_STYLE('',(#511799)); +#511799 = FILL_AREA_STYLE_COLOUR('',#510798); +#511800 = OVER_RIDING_STYLED_ITEM('overriding color',(#511801),#101559, + #511758); +#511801 = PRESENTATION_STYLE_ASSIGNMENT((#511802)); +#511802 = SURFACE_STYLE_USAGE(.BOTH.,#511803); +#511803 = SURFACE_SIDE_STYLE('',(#511804)); +#511804 = SURFACE_STYLE_FILL_AREA(#511805); +#511805 = FILL_AREA_STYLE('',(#511806)); +#511806 = FILL_AREA_STYLE_COLOUR('',#510798); +#511807 = OVER_RIDING_STYLED_ITEM('overriding color',(#511808),#101590, + #511758); +#511808 = PRESENTATION_STYLE_ASSIGNMENT((#511809)); +#511809 = SURFACE_STYLE_USAGE(.BOTH.,#511810); +#511810 = SURFACE_SIDE_STYLE('',(#511811)); +#511811 = SURFACE_STYLE_FILL_AREA(#511812); +#511812 = FILL_AREA_STYLE('',(#511813)); +#511813 = FILL_AREA_STYLE_COLOUR('',#510798); +#511814 = OVER_RIDING_STYLED_ITEM('overriding color',(#511815),#101621, + #511758); +#511815 = PRESENTATION_STYLE_ASSIGNMENT((#511816)); +#511816 = SURFACE_STYLE_USAGE(.BOTH.,#511817); +#511817 = SURFACE_SIDE_STYLE('',(#511818)); +#511818 = SURFACE_STYLE_FILL_AREA(#511819); +#511819 = FILL_AREA_STYLE('',(#511820)); +#511820 = FILL_AREA_STYLE_COLOUR('',#510798); +#511821 = OVER_RIDING_STYLED_ITEM('overriding color',(#511822),#101652, + #511758); +#511822 = PRESENTATION_STYLE_ASSIGNMENT((#511823)); +#511823 = SURFACE_STYLE_USAGE(.BOTH.,#511824); +#511824 = SURFACE_SIDE_STYLE('',(#511825)); +#511825 = SURFACE_STYLE_FILL_AREA(#511826); +#511826 = FILL_AREA_STYLE('',(#511827)); +#511827 = FILL_AREA_STYLE_COLOUR('',#510798); +#511828 = OVER_RIDING_STYLED_ITEM('overriding color',(#511829),#101683, + #511758); +#511829 = PRESENTATION_STYLE_ASSIGNMENT((#511830)); +#511830 = SURFACE_STYLE_USAGE(.BOTH.,#511831); +#511831 = SURFACE_SIDE_STYLE('',(#511832)); +#511832 = SURFACE_STYLE_FILL_AREA(#511833); +#511833 = FILL_AREA_STYLE('',(#511834)); +#511834 = FILL_AREA_STYLE_COLOUR('',#510798); +#511835 = OVER_RIDING_STYLED_ITEM('overriding color',(#511836),#101720, + #511758); +#511836 = PRESENTATION_STYLE_ASSIGNMENT((#511837)); +#511837 = SURFACE_STYLE_USAGE(.BOTH.,#511838); +#511838 = SURFACE_SIDE_STYLE('',(#511839)); +#511839 = SURFACE_STYLE_FILL_AREA(#511840); +#511840 = FILL_AREA_STYLE('',(#511841)); +#511841 = FILL_AREA_STYLE_COLOUR('',#510798); +#511842 = OVER_RIDING_STYLED_ITEM('overriding color',(#511843),#101757, + #511758); +#511843 = PRESENTATION_STYLE_ASSIGNMENT((#511844)); +#511844 = SURFACE_STYLE_USAGE(.BOTH.,#511845); +#511845 = SURFACE_SIDE_STYLE('',(#511846)); +#511846 = SURFACE_STYLE_FILL_AREA(#511847); +#511847 = FILL_AREA_STYLE('',(#511848)); +#511848 = FILL_AREA_STYLE_COLOUR('',#510798); +#511849 = OVER_RIDING_STYLED_ITEM('overriding color',(#511850),#101788, + #511758); +#511850 = PRESENTATION_STYLE_ASSIGNMENT((#511851)); +#511851 = SURFACE_STYLE_USAGE(.BOTH.,#511852); +#511852 = SURFACE_SIDE_STYLE('',(#511853)); +#511853 = SURFACE_STYLE_FILL_AREA(#511854); +#511854 = FILL_AREA_STYLE('',(#511855)); +#511855 = FILL_AREA_STYLE_COLOUR('',#510798); +#511856 = OVER_RIDING_STYLED_ITEM('overriding color',(#511857),#101825, + #511758); +#511857 = PRESENTATION_STYLE_ASSIGNMENT((#511858)); +#511858 = SURFACE_STYLE_USAGE(.BOTH.,#511859); +#511859 = SURFACE_SIDE_STYLE('',(#511860)); +#511860 = SURFACE_STYLE_FILL_AREA(#511861); +#511861 = FILL_AREA_STYLE('',(#511862)); +#511862 = FILL_AREA_STYLE_COLOUR('',#510798); +#511863 = OVER_RIDING_STYLED_ITEM('overriding color',(#511864),#101862, + #511758); +#511864 = PRESENTATION_STYLE_ASSIGNMENT((#511865)); +#511865 = SURFACE_STYLE_USAGE(.BOTH.,#511866); +#511866 = SURFACE_SIDE_STYLE('',(#511867)); +#511867 = SURFACE_STYLE_FILL_AREA(#511868); +#511868 = FILL_AREA_STYLE('',(#511869)); +#511869 = FILL_AREA_STYLE_COLOUR('',#510798); +#511870 = OVER_RIDING_STYLED_ITEM('overriding color',(#511871),#101884, + #511758); +#511871 = PRESENTATION_STYLE_ASSIGNMENT((#511872)); +#511872 = SURFACE_STYLE_USAGE(.BOTH.,#511873); +#511873 = SURFACE_SIDE_STYLE('',(#511874)); +#511874 = SURFACE_STYLE_FILL_AREA(#511875); +#511875 = FILL_AREA_STYLE('',(#511876)); +#511876 = FILL_AREA_STYLE_COLOUR('',#510798); +#511877 = OVER_RIDING_STYLED_ITEM('overriding color',(#511878),#101907, + #511758); +#511878 = PRESENTATION_STYLE_ASSIGNMENT((#511879)); +#511879 = SURFACE_STYLE_USAGE(.BOTH.,#511880); +#511880 = SURFACE_SIDE_STYLE('',(#511881)); +#511881 = SURFACE_STYLE_FILL_AREA(#511882); +#511882 = FILL_AREA_STYLE('',(#511883)); +#511883 = FILL_AREA_STYLE_COLOUR('',#510798); +#511884 = STYLED_ITEM('color',(#511885),#101930); +#511885 = PRESENTATION_STYLE_ASSIGNMENT((#511886)); +#511886 = SURFACE_STYLE_USAGE(.BOTH.,#511887); +#511887 = SURFACE_SIDE_STYLE('',(#511888)); +#511888 = SURFACE_STYLE_FILL_AREA(#511889); +#511889 = FILL_AREA_STYLE('',(#511890)); +#511890 = FILL_AREA_STYLE_COLOUR('',#506663); +#511891 = OVER_RIDING_STYLED_ITEM('overriding color',(#511892),#101932, + #511884); +#511892 = PRESENTATION_STYLE_ASSIGNMENT((#511893)); +#511893 = SURFACE_STYLE_USAGE(.BOTH.,#511894); +#511894 = SURFACE_SIDE_STYLE('',(#511895)); +#511895 = SURFACE_STYLE_FILL_AREA(#511896); +#511896 = FILL_AREA_STYLE('',(#511897)); +#511897 = FILL_AREA_STYLE_COLOUR('',#510798); +#511898 = OVER_RIDING_STYLED_ITEM('overriding color',(#511899),#101972, + #511884); +#511899 = PRESENTATION_STYLE_ASSIGNMENT((#511900)); +#511900 = SURFACE_STYLE_USAGE(.BOTH.,#511901); +#511901 = SURFACE_SIDE_STYLE('',(#511902)); +#511902 = SURFACE_STYLE_FILL_AREA(#511903); +#511903 = FILL_AREA_STYLE('',(#511904)); +#511904 = FILL_AREA_STYLE_COLOUR('',#510798); +#511905 = OVER_RIDING_STYLED_ITEM('overriding color',(#511906),#102003, + #511884); +#511906 = PRESENTATION_STYLE_ASSIGNMENT((#511907)); +#511907 = SURFACE_STYLE_USAGE(.BOTH.,#511908); +#511908 = SURFACE_SIDE_STYLE('',(#511909)); +#511909 = SURFACE_STYLE_FILL_AREA(#511910); +#511910 = FILL_AREA_STYLE('',(#511911)); +#511911 = FILL_AREA_STYLE_COLOUR('',#510798); +#511912 = OVER_RIDING_STYLED_ITEM('overriding color',(#511913),#102034, + #511884); +#511913 = PRESENTATION_STYLE_ASSIGNMENT((#511914)); +#511914 = SURFACE_STYLE_USAGE(.BOTH.,#511915); +#511915 = SURFACE_SIDE_STYLE('',(#511916)); +#511916 = SURFACE_STYLE_FILL_AREA(#511917); +#511917 = FILL_AREA_STYLE('',(#511918)); +#511918 = FILL_AREA_STYLE_COLOUR('',#510798); +#511919 = OVER_RIDING_STYLED_ITEM('overriding color',(#511920),#102065, + #511884); +#511920 = PRESENTATION_STYLE_ASSIGNMENT((#511921)); +#511921 = SURFACE_STYLE_USAGE(.BOTH.,#511922); +#511922 = SURFACE_SIDE_STYLE('',(#511923)); +#511923 = SURFACE_STYLE_FILL_AREA(#511924); +#511924 = FILL_AREA_STYLE('',(#511925)); +#511925 = FILL_AREA_STYLE_COLOUR('',#510798); +#511926 = OVER_RIDING_STYLED_ITEM('overriding color',(#511927),#102096, + #511884); +#511927 = PRESENTATION_STYLE_ASSIGNMENT((#511928)); +#511928 = SURFACE_STYLE_USAGE(.BOTH.,#511929); +#511929 = SURFACE_SIDE_STYLE('',(#511930)); +#511930 = SURFACE_STYLE_FILL_AREA(#511931); +#511931 = FILL_AREA_STYLE('',(#511932)); +#511932 = FILL_AREA_STYLE_COLOUR('',#510798); +#511933 = OVER_RIDING_STYLED_ITEM('overriding color',(#511934),#102127, + #511884); +#511934 = PRESENTATION_STYLE_ASSIGNMENT((#511935)); +#511935 = SURFACE_STYLE_USAGE(.BOTH.,#511936); +#511936 = SURFACE_SIDE_STYLE('',(#511937)); +#511937 = SURFACE_STYLE_FILL_AREA(#511938); +#511938 = FILL_AREA_STYLE('',(#511939)); +#511939 = FILL_AREA_STYLE_COLOUR('',#510798); +#511940 = OVER_RIDING_STYLED_ITEM('overriding color',(#511941),#102158, + #511884); +#511941 = PRESENTATION_STYLE_ASSIGNMENT((#511942)); +#511942 = SURFACE_STYLE_USAGE(.BOTH.,#511943); +#511943 = SURFACE_SIDE_STYLE('',(#511944)); +#511944 = SURFACE_STYLE_FILL_AREA(#511945); +#511945 = FILL_AREA_STYLE('',(#511946)); +#511946 = FILL_AREA_STYLE_COLOUR('',#510798); +#511947 = OVER_RIDING_STYLED_ITEM('overriding color',(#511948),#102189, + #511884); +#511948 = PRESENTATION_STYLE_ASSIGNMENT((#511949)); +#511949 = SURFACE_STYLE_USAGE(.BOTH.,#511950); +#511950 = SURFACE_SIDE_STYLE('',(#511951)); +#511951 = SURFACE_STYLE_FILL_AREA(#511952); +#511952 = FILL_AREA_STYLE('',(#511953)); +#511953 = FILL_AREA_STYLE_COLOUR('',#510798); +#511954 = OVER_RIDING_STYLED_ITEM('overriding color',(#511955),#102220, + #511884); +#511955 = PRESENTATION_STYLE_ASSIGNMENT((#511956)); +#511956 = SURFACE_STYLE_USAGE(.BOTH.,#511957); +#511957 = SURFACE_SIDE_STYLE('',(#511958)); +#511958 = SURFACE_STYLE_FILL_AREA(#511959); +#511959 = FILL_AREA_STYLE('',(#511960)); +#511960 = FILL_AREA_STYLE_COLOUR('',#510798); +#511961 = OVER_RIDING_STYLED_ITEM('overriding color',(#511962),#102251, + #511884); +#511962 = PRESENTATION_STYLE_ASSIGNMENT((#511963)); +#511963 = SURFACE_STYLE_USAGE(.BOTH.,#511964); +#511964 = SURFACE_SIDE_STYLE('',(#511965)); +#511965 = SURFACE_STYLE_FILL_AREA(#511966); +#511966 = FILL_AREA_STYLE('',(#511967)); +#511967 = FILL_AREA_STYLE_COLOUR('',#510798); +#511968 = OVER_RIDING_STYLED_ITEM('overriding color',(#511969),#102282, + #511884); +#511969 = PRESENTATION_STYLE_ASSIGNMENT((#511970)); +#511970 = SURFACE_STYLE_USAGE(.BOTH.,#511971); +#511971 = SURFACE_SIDE_STYLE('',(#511972)); +#511972 = SURFACE_STYLE_FILL_AREA(#511973); +#511973 = FILL_AREA_STYLE('',(#511974)); +#511974 = FILL_AREA_STYLE_COLOUR('',#510798); +#511975 = OVER_RIDING_STYLED_ITEM('overriding color',(#511976),#102304, + #511884); +#511976 = PRESENTATION_STYLE_ASSIGNMENT((#511977)); +#511977 = SURFACE_STYLE_USAGE(.BOTH.,#511978); +#511978 = SURFACE_SIDE_STYLE('',(#511979)); +#511979 = SURFACE_STYLE_FILL_AREA(#511980); +#511980 = FILL_AREA_STYLE('',(#511981)); +#511981 = FILL_AREA_STYLE_COLOUR('',#510798); +#511982 = OVER_RIDING_STYLED_ITEM('overriding color',(#511983),#102324, + #511884); +#511983 = PRESENTATION_STYLE_ASSIGNMENT((#511984)); +#511984 = SURFACE_STYLE_USAGE(.BOTH.,#511985); +#511985 = SURFACE_SIDE_STYLE('',(#511986)); +#511986 = SURFACE_STYLE_FILL_AREA(#511987); +#511987 = FILL_AREA_STYLE('',(#511988)); +#511988 = FILL_AREA_STYLE_COLOUR('',#510798); +#511989 = STYLED_ITEM('color',(#511990),#102344); +#511990 = PRESENTATION_STYLE_ASSIGNMENT((#511991)); +#511991 = SURFACE_STYLE_USAGE(.BOTH.,#511992); +#511992 = SURFACE_SIDE_STYLE('',(#511993)); +#511993 = SURFACE_STYLE_FILL_AREA(#511994); +#511994 = FILL_AREA_STYLE('',(#511995)); +#511995 = FILL_AREA_STYLE_COLOUR('',#506663); +#511996 = OVER_RIDING_STYLED_ITEM('overriding color',(#511997),#102346, + #511989); +#511997 = PRESENTATION_STYLE_ASSIGNMENT((#511998)); +#511998 = SURFACE_STYLE_USAGE(.BOTH.,#511999); +#511999 = SURFACE_SIDE_STYLE('',(#512000)); +#512000 = SURFACE_STYLE_FILL_AREA(#512001); +#512001 = FILL_AREA_STYLE('',(#512002)); +#512002 = FILL_AREA_STYLE_COLOUR('',#510798); +#512003 = OVER_RIDING_STYLED_ITEM('overriding color',(#512004),#102476, + #511989); +#512004 = PRESENTATION_STYLE_ASSIGNMENT((#512005)); +#512005 = SURFACE_STYLE_USAGE(.BOTH.,#512006); +#512006 = SURFACE_SIDE_STYLE('',(#512007)); +#512007 = SURFACE_STYLE_FILL_AREA(#512008); +#512008 = FILL_AREA_STYLE('',(#512009)); +#512009 = FILL_AREA_STYLE_COLOUR('',#510798); +#512010 = OVER_RIDING_STYLED_ITEM('overriding color',(#512011),#102606, + #511989); +#512011 = PRESENTATION_STYLE_ASSIGNMENT((#512012)); +#512012 = SURFACE_STYLE_USAGE(.BOTH.,#512013); +#512013 = SURFACE_SIDE_STYLE('',(#512014)); +#512014 = SURFACE_STYLE_FILL_AREA(#512015); +#512015 = FILL_AREA_STYLE('',(#512016)); +#512016 = FILL_AREA_STYLE_COLOUR('',#510798); +#512017 = OVER_RIDING_STYLED_ITEM('overriding color',(#512018),#102628, + #511989); +#512018 = PRESENTATION_STYLE_ASSIGNMENT((#512019)); +#512019 = SURFACE_STYLE_USAGE(.BOTH.,#512020); +#512020 = SURFACE_SIDE_STYLE('',(#512021)); +#512021 = SURFACE_STYLE_FILL_AREA(#512022); +#512022 = FILL_AREA_STYLE('',(#512023)); +#512023 = FILL_AREA_STYLE_COLOUR('',#510798); +#512024 = OVER_RIDING_STYLED_ITEM('overriding color',(#512025),#102649, + #511989); +#512025 = PRESENTATION_STYLE_ASSIGNMENT((#512026)); +#512026 = SURFACE_STYLE_USAGE(.BOTH.,#512027); +#512027 = SURFACE_SIDE_STYLE('',(#512028)); +#512028 = SURFACE_STYLE_FILL_AREA(#512029); +#512029 = FILL_AREA_STYLE('',(#512030)); +#512030 = FILL_AREA_STYLE_COLOUR('',#510798); +#512031 = OVER_RIDING_STYLED_ITEM('overriding color',(#512032),#102670, + #511989); +#512032 = PRESENTATION_STYLE_ASSIGNMENT((#512033)); +#512033 = SURFACE_STYLE_USAGE(.BOTH.,#512034); +#512034 = SURFACE_SIDE_STYLE('',(#512035)); +#512035 = SURFACE_STYLE_FILL_AREA(#512036); +#512036 = FILL_AREA_STYLE('',(#512037)); +#512037 = FILL_AREA_STYLE_COLOUR('',#510798); +#512038 = OVER_RIDING_STYLED_ITEM('overriding color',(#512039),#102691, + #511989); +#512039 = PRESENTATION_STYLE_ASSIGNMENT((#512040)); +#512040 = SURFACE_STYLE_USAGE(.BOTH.,#512041); +#512041 = SURFACE_SIDE_STYLE('',(#512042)); +#512042 = SURFACE_STYLE_FILL_AREA(#512043); +#512043 = FILL_AREA_STYLE('',(#512044)); +#512044 = FILL_AREA_STYLE_COLOUR('',#510798); +#512045 = OVER_RIDING_STYLED_ITEM('overriding color',(#512046),#102712, + #511989); +#512046 = PRESENTATION_STYLE_ASSIGNMENT((#512047)); +#512047 = SURFACE_STYLE_USAGE(.BOTH.,#512048); +#512048 = SURFACE_SIDE_STYLE('',(#512049)); +#512049 = SURFACE_STYLE_FILL_AREA(#512050); +#512050 = FILL_AREA_STYLE('',(#512051)); +#512051 = FILL_AREA_STYLE_COLOUR('',#510798); +#512052 = OVER_RIDING_STYLED_ITEM('overriding color',(#512053),#102729, + #511989); +#512053 = PRESENTATION_STYLE_ASSIGNMENT((#512054)); +#512054 = SURFACE_STYLE_USAGE(.BOTH.,#512055); +#512055 = SURFACE_SIDE_STYLE('',(#512056)); +#512056 = SURFACE_STYLE_FILL_AREA(#512057); +#512057 = FILL_AREA_STYLE('',(#512058)); +#512058 = FILL_AREA_STYLE_COLOUR('',#510798); +#512059 = OVER_RIDING_STYLED_ITEM('overriding color',(#512060),#102741, + #511989); +#512060 = PRESENTATION_STYLE_ASSIGNMENT((#512061)); +#512061 = SURFACE_STYLE_USAGE(.BOTH.,#512062); +#512062 = SURFACE_SIDE_STYLE('',(#512063)); +#512063 = SURFACE_STYLE_FILL_AREA(#512064); +#512064 = FILL_AREA_STYLE('',(#512065)); +#512065 = FILL_AREA_STYLE_COLOUR('',#510798); +#512066 = OVER_RIDING_STYLED_ITEM('overriding color',(#512067),#102763, + #511989); +#512067 = PRESENTATION_STYLE_ASSIGNMENT((#512068)); +#512068 = SURFACE_STYLE_USAGE(.BOTH.,#512069); +#512069 = SURFACE_SIDE_STYLE('',(#512070)); +#512070 = SURFACE_STYLE_FILL_AREA(#512071); +#512071 = FILL_AREA_STYLE('',(#512072)); +#512072 = FILL_AREA_STYLE_COLOUR('',#510798); +#512073 = OVER_RIDING_STYLED_ITEM('overriding color',(#512074),#102780, + #511989); +#512074 = PRESENTATION_STYLE_ASSIGNMENT((#512075)); +#512075 = SURFACE_STYLE_USAGE(.BOTH.,#512076); +#512076 = SURFACE_SIDE_STYLE('',(#512077)); +#512077 = SURFACE_STYLE_FILL_AREA(#512078); +#512078 = FILL_AREA_STYLE('',(#512079)); +#512079 = FILL_AREA_STYLE_COLOUR('',#510798); +#512080 = OVER_RIDING_STYLED_ITEM('overriding color',(#512081),#102797, + #511989); +#512081 = PRESENTATION_STYLE_ASSIGNMENT((#512082)); +#512082 = SURFACE_STYLE_USAGE(.BOTH.,#512083); +#512083 = SURFACE_SIDE_STYLE('',(#512084)); +#512084 = SURFACE_STYLE_FILL_AREA(#512085); +#512085 = FILL_AREA_STYLE('',(#512086)); +#512086 = FILL_AREA_STYLE_COLOUR('',#510798); +#512087 = OVER_RIDING_STYLED_ITEM('overriding color',(#512088),#102818, + #511989); +#512088 = PRESENTATION_STYLE_ASSIGNMENT((#512089)); +#512089 = SURFACE_STYLE_USAGE(.BOTH.,#512090); +#512090 = SURFACE_SIDE_STYLE('',(#512091)); +#512091 = SURFACE_STYLE_FILL_AREA(#512092); +#512092 = FILL_AREA_STYLE('',(#512093)); +#512093 = FILL_AREA_STYLE_COLOUR('',#510798); +#512094 = OVER_RIDING_STYLED_ITEM('overriding color',(#512095),#102839, + #511989); +#512095 = PRESENTATION_STYLE_ASSIGNMENT((#512096)); +#512096 = SURFACE_STYLE_USAGE(.BOTH.,#512097); +#512097 = SURFACE_SIDE_STYLE('',(#512098)); +#512098 = SURFACE_STYLE_FILL_AREA(#512099); +#512099 = FILL_AREA_STYLE('',(#512100)); +#512100 = FILL_AREA_STYLE_COLOUR('',#510798); +#512101 = OVER_RIDING_STYLED_ITEM('overriding color',(#512102),#102860, + #511989); +#512102 = PRESENTATION_STYLE_ASSIGNMENT((#512103)); +#512103 = SURFACE_STYLE_USAGE(.BOTH.,#512104); +#512104 = SURFACE_SIDE_STYLE('',(#512105)); +#512105 = SURFACE_STYLE_FILL_AREA(#512106); +#512106 = FILL_AREA_STYLE('',(#512107)); +#512107 = FILL_AREA_STYLE_COLOUR('',#510798); +#512108 = STYLED_ITEM('color',(#512109),#102876); +#512109 = PRESENTATION_STYLE_ASSIGNMENT((#512110)); +#512110 = SURFACE_STYLE_USAGE(.BOTH.,#512111); +#512111 = SURFACE_SIDE_STYLE('',(#512112)); +#512112 = SURFACE_STYLE_FILL_AREA(#512113); +#512113 = FILL_AREA_STYLE('',(#512114)); +#512114 = FILL_AREA_STYLE_COLOUR('',#506663); +#512115 = OVER_RIDING_STYLED_ITEM('overriding color',(#512116),#102878, + #512108); +#512116 = PRESENTATION_STYLE_ASSIGNMENT((#512117)); +#512117 = SURFACE_STYLE_USAGE(.BOTH.,#512118); +#512118 = SURFACE_SIDE_STYLE('',(#512119)); +#512119 = SURFACE_STYLE_FILL_AREA(#512120); +#512120 = FILL_AREA_STYLE('',(#512121)); +#512121 = FILL_AREA_STYLE_COLOUR('',#510798); +#512122 = OVER_RIDING_STYLED_ITEM('overriding color',(#512123),#103002, + #512108); +#512123 = PRESENTATION_STYLE_ASSIGNMENT((#512124)); +#512124 = SURFACE_STYLE_USAGE(.BOTH.,#512125); +#512125 = SURFACE_SIDE_STYLE('',(#512126)); +#512126 = SURFACE_STYLE_FILL_AREA(#512127); +#512127 = FILL_AREA_STYLE('',(#512128)); +#512128 = FILL_AREA_STYLE_COLOUR('',#510798); +#512129 = OVER_RIDING_STYLED_ITEM('overriding color',(#512130),#103126, + #512108); +#512130 = PRESENTATION_STYLE_ASSIGNMENT((#512131)); +#512131 = SURFACE_STYLE_USAGE(.BOTH.,#512132); +#512132 = SURFACE_SIDE_STYLE('',(#512133)); +#512133 = SURFACE_STYLE_FILL_AREA(#512134); +#512134 = FILL_AREA_STYLE('',(#512135)); +#512135 = FILL_AREA_STYLE_COLOUR('',#510798); +#512136 = OVER_RIDING_STYLED_ITEM('overriding color',(#512137),#103148, + #512108); +#512137 = PRESENTATION_STYLE_ASSIGNMENT((#512138)); +#512138 = SURFACE_STYLE_USAGE(.BOTH.,#512139); +#512139 = SURFACE_SIDE_STYLE('',(#512140)); +#512140 = SURFACE_STYLE_FILL_AREA(#512141); +#512141 = FILL_AREA_STYLE('',(#512142)); +#512142 = FILL_AREA_STYLE_COLOUR('',#510798); +#512143 = OVER_RIDING_STYLED_ITEM('overriding color',(#512144),#103165, + #512108); +#512144 = PRESENTATION_STYLE_ASSIGNMENT((#512145)); +#512145 = SURFACE_STYLE_USAGE(.BOTH.,#512146); +#512146 = SURFACE_SIDE_STYLE('',(#512147)); +#512147 = SURFACE_STYLE_FILL_AREA(#512148); +#512148 = FILL_AREA_STYLE('',(#512149)); +#512149 = FILL_AREA_STYLE_COLOUR('',#510798); +#512150 = OVER_RIDING_STYLED_ITEM('overriding color',(#512151),#103182, + #512108); +#512151 = PRESENTATION_STYLE_ASSIGNMENT((#512152)); +#512152 = SURFACE_STYLE_USAGE(.BOTH.,#512153); +#512153 = SURFACE_SIDE_STYLE('',(#512154)); +#512154 = SURFACE_STYLE_FILL_AREA(#512155); +#512155 = FILL_AREA_STYLE('',(#512156)); +#512156 = FILL_AREA_STYLE_COLOUR('',#510798); +#512157 = OVER_RIDING_STYLED_ITEM('overriding color',(#512158),#103199, + #512108); +#512158 = PRESENTATION_STYLE_ASSIGNMENT((#512159)); +#512159 = SURFACE_STYLE_USAGE(.BOTH.,#512160); +#512160 = SURFACE_SIDE_STYLE('',(#512161)); +#512161 = SURFACE_STYLE_FILL_AREA(#512162); +#512162 = FILL_AREA_STYLE('',(#512163)); +#512163 = FILL_AREA_STYLE_COLOUR('',#510798); +#512164 = OVER_RIDING_STYLED_ITEM('overriding color',(#512165),#103216, + #512108); +#512165 = PRESENTATION_STYLE_ASSIGNMENT((#512166)); +#512166 = SURFACE_STYLE_USAGE(.BOTH.,#512167); +#512167 = SURFACE_SIDE_STYLE('',(#512168)); +#512168 = SURFACE_STYLE_FILL_AREA(#512169); +#512169 = FILL_AREA_STYLE('',(#512170)); +#512170 = FILL_AREA_STYLE_COLOUR('',#510798); +#512171 = OVER_RIDING_STYLED_ITEM('overriding color',(#512172),#103233, + #512108); +#512172 = PRESENTATION_STYLE_ASSIGNMENT((#512173)); +#512173 = SURFACE_STYLE_USAGE(.BOTH.,#512174); +#512174 = SURFACE_SIDE_STYLE('',(#512175)); +#512175 = SURFACE_STYLE_FILL_AREA(#512176); +#512176 = FILL_AREA_STYLE('',(#512177)); +#512177 = FILL_AREA_STYLE_COLOUR('',#510798); +#512178 = OVER_RIDING_STYLED_ITEM('overriding color',(#512179),#103250, + #512108); +#512179 = PRESENTATION_STYLE_ASSIGNMENT((#512180)); +#512180 = SURFACE_STYLE_USAGE(.BOTH.,#512181); +#512181 = SURFACE_SIDE_STYLE('',(#512182)); +#512182 = SURFACE_STYLE_FILL_AREA(#512183); +#512183 = FILL_AREA_STYLE('',(#512184)); +#512184 = FILL_AREA_STYLE_COLOUR('',#510798); +#512185 = OVER_RIDING_STYLED_ITEM('overriding color',(#512186),#103262, + #512108); +#512186 = PRESENTATION_STYLE_ASSIGNMENT((#512187)); +#512187 = SURFACE_STYLE_USAGE(.BOTH.,#512188); +#512188 = SURFACE_SIDE_STYLE('',(#512189)); +#512189 = SURFACE_STYLE_FILL_AREA(#512190); +#512190 = FILL_AREA_STYLE('',(#512191)); +#512191 = FILL_AREA_STYLE_COLOUR('',#510798); +#512192 = OVER_RIDING_STYLED_ITEM('overriding color',(#512193),#103284, + #512108); +#512193 = PRESENTATION_STYLE_ASSIGNMENT((#512194)); +#512194 = SURFACE_STYLE_USAGE(.BOTH.,#512195); +#512195 = SURFACE_SIDE_STYLE('',(#512196)); +#512196 = SURFACE_STYLE_FILL_AREA(#512197); +#512197 = FILL_AREA_STYLE('',(#512198)); +#512198 = FILL_AREA_STYLE_COLOUR('',#510798); +#512199 = OVER_RIDING_STYLED_ITEM('overriding color',(#512200),#103301, + #512108); +#512200 = PRESENTATION_STYLE_ASSIGNMENT((#512201)); +#512201 = SURFACE_STYLE_USAGE(.BOTH.,#512202); +#512202 = SURFACE_SIDE_STYLE('',(#512203)); +#512203 = SURFACE_STYLE_FILL_AREA(#512204); +#512204 = FILL_AREA_STYLE('',(#512205)); +#512205 = FILL_AREA_STYLE_COLOUR('',#510798); +#512206 = OVER_RIDING_STYLED_ITEM('overriding color',(#512207),#103322, + #512108); +#512207 = PRESENTATION_STYLE_ASSIGNMENT((#512208)); +#512208 = SURFACE_STYLE_USAGE(.BOTH.,#512209); +#512209 = SURFACE_SIDE_STYLE('',(#512210)); +#512210 = SURFACE_STYLE_FILL_AREA(#512211); +#512211 = FILL_AREA_STYLE('',(#512212)); +#512212 = FILL_AREA_STYLE_COLOUR('',#510798); +#512213 = OVER_RIDING_STYLED_ITEM('overriding color',(#512214),#103339, + #512108); +#512214 = PRESENTATION_STYLE_ASSIGNMENT((#512215)); +#512215 = SURFACE_STYLE_USAGE(.BOTH.,#512216); +#512216 = SURFACE_SIDE_STYLE('',(#512217)); +#512217 = SURFACE_STYLE_FILL_AREA(#512218); +#512218 = FILL_AREA_STYLE('',(#512219)); +#512219 = FILL_AREA_STYLE_COLOUR('',#510798); +#512220 = OVER_RIDING_STYLED_ITEM('overriding color',(#512221),#103360, + #512108); +#512221 = PRESENTATION_STYLE_ASSIGNMENT((#512222)); +#512222 = SURFACE_STYLE_USAGE(.BOTH.,#512223); +#512223 = SURFACE_SIDE_STYLE('',(#512224)); +#512224 = SURFACE_STYLE_FILL_AREA(#512225); +#512225 = FILL_AREA_STYLE('',(#512226)); +#512226 = FILL_AREA_STYLE_COLOUR('',#510798); +#512227 = STYLED_ITEM('color',(#512228),#103372); +#512228 = PRESENTATION_STYLE_ASSIGNMENT((#512229)); +#512229 = SURFACE_STYLE_USAGE(.BOTH.,#512230); +#512230 = SURFACE_SIDE_STYLE('',(#512231)); +#512231 = SURFACE_STYLE_FILL_AREA(#512232); +#512232 = FILL_AREA_STYLE('',(#512233)); +#512233 = FILL_AREA_STYLE_COLOUR('',#506663); +#512234 = OVER_RIDING_STYLED_ITEM('overriding color',(#512235),#103374, + #512227); +#512235 = PRESENTATION_STYLE_ASSIGNMENT((#512236)); +#512236 = SURFACE_STYLE_USAGE(.BOTH.,#512237); +#512237 = SURFACE_SIDE_STYLE('',(#512238)); +#512238 = SURFACE_STYLE_FILL_AREA(#512239); +#512239 = FILL_AREA_STYLE('',(#512240)); +#512240 = FILL_AREA_STYLE_COLOUR('',#510798); +#512241 = OVER_RIDING_STYLED_ITEM('overriding color',(#512242),#103699, + #512227); +#512242 = PRESENTATION_STYLE_ASSIGNMENT((#512243)); +#512243 = SURFACE_STYLE_USAGE(.BOTH.,#512244); +#512244 = SURFACE_SIDE_STYLE('',(#512245)); +#512245 = SURFACE_STYLE_FILL_AREA(#512246); +#512246 = FILL_AREA_STYLE('',(#512247)); +#512247 = FILL_AREA_STYLE_COLOUR('',#510798); +#512248 = OVER_RIDING_STYLED_ITEM('overriding color',(#512249),#104024, + #512227); +#512249 = PRESENTATION_STYLE_ASSIGNMENT((#512250)); +#512250 = SURFACE_STYLE_USAGE(.BOTH.,#512251); +#512251 = SURFACE_SIDE_STYLE('',(#512252)); +#512252 = SURFACE_STYLE_FILL_AREA(#512253); +#512253 = FILL_AREA_STYLE('',(#512254)); +#512254 = FILL_AREA_STYLE_COLOUR('',#510798); +#512255 = OVER_RIDING_STYLED_ITEM('overriding color',(#512256),#104050, + #512227); +#512256 = PRESENTATION_STYLE_ASSIGNMENT((#512257)); +#512257 = SURFACE_STYLE_USAGE(.BOTH.,#512258); +#512258 = SURFACE_SIDE_STYLE('',(#512259)); +#512259 = SURFACE_STYLE_FILL_AREA(#512260); +#512260 = FILL_AREA_STYLE('',(#512261)); +#512261 = FILL_AREA_STYLE_COLOUR('',#510798); +#512262 = OVER_RIDING_STYLED_ITEM('overriding color',(#512263),#104071, + #512227); +#512263 = PRESENTATION_STYLE_ASSIGNMENT((#512264)); +#512264 = SURFACE_STYLE_USAGE(.BOTH.,#512265); +#512265 = SURFACE_SIDE_STYLE('',(#512266)); +#512266 = SURFACE_STYLE_FILL_AREA(#512267); +#512267 = FILL_AREA_STYLE('',(#512268)); +#512268 = FILL_AREA_STYLE_COLOUR('',#510798); +#512269 = OVER_RIDING_STYLED_ITEM('overriding color',(#512270),#104092, + #512227); +#512270 = PRESENTATION_STYLE_ASSIGNMENT((#512271)); +#512271 = SURFACE_STYLE_USAGE(.BOTH.,#512272); +#512272 = SURFACE_SIDE_STYLE('',(#512273)); +#512273 = SURFACE_STYLE_FILL_AREA(#512274); +#512274 = FILL_AREA_STYLE('',(#512275)); +#512275 = FILL_AREA_STYLE_COLOUR('',#510798); +#512276 = OVER_RIDING_STYLED_ITEM('overriding color',(#512277),#104113, + #512227); +#512277 = PRESENTATION_STYLE_ASSIGNMENT((#512278)); +#512278 = SURFACE_STYLE_USAGE(.BOTH.,#512279); +#512279 = SURFACE_SIDE_STYLE('',(#512280)); +#512280 = SURFACE_STYLE_FILL_AREA(#512281); +#512281 = FILL_AREA_STYLE('',(#512282)); +#512282 = FILL_AREA_STYLE_COLOUR('',#510798); +#512283 = OVER_RIDING_STYLED_ITEM('overriding color',(#512284),#104134, + #512227); +#512284 = PRESENTATION_STYLE_ASSIGNMENT((#512285)); +#512285 = SURFACE_STYLE_USAGE(.BOTH.,#512286); +#512286 = SURFACE_SIDE_STYLE('',(#512287)); +#512287 = SURFACE_STYLE_FILL_AREA(#512288); +#512288 = FILL_AREA_STYLE('',(#512289)); +#512289 = FILL_AREA_STYLE_COLOUR('',#510798); +#512290 = OVER_RIDING_STYLED_ITEM('overriding color',(#512291),#104155, + #512227); +#512291 = PRESENTATION_STYLE_ASSIGNMENT((#512292)); +#512292 = SURFACE_STYLE_USAGE(.BOTH.,#512293); +#512293 = SURFACE_SIDE_STYLE('',(#512294)); +#512294 = SURFACE_STYLE_FILL_AREA(#512295); +#512295 = FILL_AREA_STYLE('',(#512296)); +#512296 = FILL_AREA_STYLE_COLOUR('',#510798); +#512297 = OVER_RIDING_STYLED_ITEM('overriding color',(#512298),#104176, + #512227); +#512298 = PRESENTATION_STYLE_ASSIGNMENT((#512299)); +#512299 = SURFACE_STYLE_USAGE(.BOTH.,#512300); +#512300 = SURFACE_SIDE_STYLE('',(#512301)); +#512301 = SURFACE_STYLE_FILL_AREA(#512302); +#512302 = FILL_AREA_STYLE('',(#512303)); +#512303 = FILL_AREA_STYLE_COLOUR('',#510798); +#512304 = OVER_RIDING_STYLED_ITEM('overriding color',(#512305),#104197, + #512227); +#512305 = PRESENTATION_STYLE_ASSIGNMENT((#512306)); +#512306 = SURFACE_STYLE_USAGE(.BOTH.,#512307); +#512307 = SURFACE_SIDE_STYLE('',(#512308)); +#512308 = SURFACE_STYLE_FILL_AREA(#512309); +#512309 = FILL_AREA_STYLE('',(#512310)); +#512310 = FILL_AREA_STYLE_COLOUR('',#510798); +#512311 = OVER_RIDING_STYLED_ITEM('overriding color',(#512312),#104218, + #512227); +#512312 = PRESENTATION_STYLE_ASSIGNMENT((#512313)); +#512313 = SURFACE_STYLE_USAGE(.BOTH.,#512314); +#512314 = SURFACE_SIDE_STYLE('',(#512315)); +#512315 = SURFACE_STYLE_FILL_AREA(#512316); +#512316 = FILL_AREA_STYLE('',(#512317)); +#512317 = FILL_AREA_STYLE_COLOUR('',#510798); +#512318 = OVER_RIDING_STYLED_ITEM('overriding color',(#512319),#104239, + #512227); +#512319 = PRESENTATION_STYLE_ASSIGNMENT((#512320)); +#512320 = SURFACE_STYLE_USAGE(.BOTH.,#512321); +#512321 = SURFACE_SIDE_STYLE('',(#512322)); +#512322 = SURFACE_STYLE_FILL_AREA(#512323); +#512323 = FILL_AREA_STYLE('',(#512324)); +#512324 = FILL_AREA_STYLE_COLOUR('',#510798); +#512325 = OVER_RIDING_STYLED_ITEM('overriding color',(#512326),#104260, + #512227); +#512326 = PRESENTATION_STYLE_ASSIGNMENT((#512327)); +#512327 = SURFACE_STYLE_USAGE(.BOTH.,#512328); +#512328 = SURFACE_SIDE_STYLE('',(#512329)); +#512329 = SURFACE_STYLE_FILL_AREA(#512330); +#512330 = FILL_AREA_STYLE('',(#512331)); +#512331 = FILL_AREA_STYLE_COLOUR('',#510798); +#512332 = OVER_RIDING_STYLED_ITEM('overriding color',(#512333),#104281, + #512227); +#512333 = PRESENTATION_STYLE_ASSIGNMENT((#512334)); +#512334 = SURFACE_STYLE_USAGE(.BOTH.,#512335); +#512335 = SURFACE_SIDE_STYLE('',(#512336)); +#512336 = SURFACE_STYLE_FILL_AREA(#512337); +#512337 = FILL_AREA_STYLE('',(#512338)); +#512338 = FILL_AREA_STYLE_COLOUR('',#510798); +#512339 = OVER_RIDING_STYLED_ITEM('overriding color',(#512340),#104298, + #512227); +#512340 = PRESENTATION_STYLE_ASSIGNMENT((#512341)); +#512341 = SURFACE_STYLE_USAGE(.BOTH.,#512342); +#512342 = SURFACE_SIDE_STYLE('',(#512343)); +#512343 = SURFACE_STYLE_FILL_AREA(#512344); +#512344 = FILL_AREA_STYLE('',(#512345)); +#512345 = FILL_AREA_STYLE_COLOUR('',#510798); +#512346 = OVER_RIDING_STYLED_ITEM('overriding color',(#512347),#104315, + #512227); +#512347 = PRESENTATION_STYLE_ASSIGNMENT((#512348)); +#512348 = SURFACE_STYLE_USAGE(.BOTH.,#512349); +#512349 = SURFACE_SIDE_STYLE('',(#512350)); +#512350 = SURFACE_STYLE_FILL_AREA(#512351); +#512351 = FILL_AREA_STYLE('',(#512352)); +#512352 = FILL_AREA_STYLE_COLOUR('',#510798); +#512353 = OVER_RIDING_STYLED_ITEM('overriding color',(#512354),#104332, + #512227); +#512354 = PRESENTATION_STYLE_ASSIGNMENT((#512355)); +#512355 = SURFACE_STYLE_USAGE(.BOTH.,#512356); +#512356 = SURFACE_SIDE_STYLE('',(#512357)); +#512357 = SURFACE_STYLE_FILL_AREA(#512358); +#512358 = FILL_AREA_STYLE('',(#512359)); +#512359 = FILL_AREA_STYLE_COLOUR('',#510798); +#512360 = OVER_RIDING_STYLED_ITEM('overriding color',(#512361),#104349, + #512227); +#512361 = PRESENTATION_STYLE_ASSIGNMENT((#512362)); +#512362 = SURFACE_STYLE_USAGE(.BOTH.,#512363); +#512363 = SURFACE_SIDE_STYLE('',(#512364)); +#512364 = SURFACE_STYLE_FILL_AREA(#512365); +#512365 = FILL_AREA_STYLE('',(#512366)); +#512366 = FILL_AREA_STYLE_COLOUR('',#510798); +#512367 = OVER_RIDING_STYLED_ITEM('overriding color',(#512368),#104370, + #512227); +#512368 = PRESENTATION_STYLE_ASSIGNMENT((#512369)); +#512369 = SURFACE_STYLE_USAGE(.BOTH.,#512370); +#512370 = SURFACE_SIDE_STYLE('',(#512371)); +#512371 = SURFACE_STYLE_FILL_AREA(#512372); +#512372 = FILL_AREA_STYLE('',(#512373)); +#512373 = FILL_AREA_STYLE_COLOUR('',#510798); +#512374 = OVER_RIDING_STYLED_ITEM('overriding color',(#512375),#104391, + #512227); +#512375 = PRESENTATION_STYLE_ASSIGNMENT((#512376)); +#512376 = SURFACE_STYLE_USAGE(.BOTH.,#512377); +#512377 = SURFACE_SIDE_STYLE('',(#512378)); +#512378 = SURFACE_STYLE_FILL_AREA(#512379); +#512379 = FILL_AREA_STYLE('',(#512380)); +#512380 = FILL_AREA_STYLE_COLOUR('',#510798); +#512381 = OVER_RIDING_STYLED_ITEM('overriding color',(#512382),#104412, + #512227); +#512382 = PRESENTATION_STYLE_ASSIGNMENT((#512383)); +#512383 = SURFACE_STYLE_USAGE(.BOTH.,#512384); +#512384 = SURFACE_SIDE_STYLE('',(#512385)); +#512385 = SURFACE_STYLE_FILL_AREA(#512386); +#512386 = FILL_AREA_STYLE('',(#512387)); +#512387 = FILL_AREA_STYLE_COLOUR('',#510798); +#512388 = OVER_RIDING_STYLED_ITEM('overriding color',(#512389),#104433, + #512227); +#512389 = PRESENTATION_STYLE_ASSIGNMENT((#512390)); +#512390 = SURFACE_STYLE_USAGE(.BOTH.,#512391); +#512391 = SURFACE_SIDE_STYLE('',(#512392)); +#512392 = SURFACE_STYLE_FILL_AREA(#512393); +#512393 = FILL_AREA_STYLE('',(#512394)); +#512394 = FILL_AREA_STYLE_COLOUR('',#510798); +#512395 = OVER_RIDING_STYLED_ITEM('overriding color',(#512396),#104454, + #512227); +#512396 = PRESENTATION_STYLE_ASSIGNMENT((#512397)); +#512397 = SURFACE_STYLE_USAGE(.BOTH.,#512398); +#512398 = SURFACE_SIDE_STYLE('',(#512399)); +#512399 = SURFACE_STYLE_FILL_AREA(#512400); +#512400 = FILL_AREA_STYLE('',(#512401)); +#512401 = FILL_AREA_STYLE_COLOUR('',#510798); +#512402 = OVER_RIDING_STYLED_ITEM('overriding color',(#512403),#104475, + #512227); +#512403 = PRESENTATION_STYLE_ASSIGNMENT((#512404)); +#512404 = SURFACE_STYLE_USAGE(.BOTH.,#512405); +#512405 = SURFACE_SIDE_STYLE('',(#512406)); +#512406 = SURFACE_STYLE_FILL_AREA(#512407); +#512407 = FILL_AREA_STYLE('',(#512408)); +#512408 = FILL_AREA_STYLE_COLOUR('',#510798); +#512409 = OVER_RIDING_STYLED_ITEM('overriding color',(#512410),#104496, + #512227); +#512410 = PRESENTATION_STYLE_ASSIGNMENT((#512411)); +#512411 = SURFACE_STYLE_USAGE(.BOTH.,#512412); +#512412 = SURFACE_SIDE_STYLE('',(#512413)); +#512413 = SURFACE_STYLE_FILL_AREA(#512414); +#512414 = FILL_AREA_STYLE('',(#512415)); +#512415 = FILL_AREA_STYLE_COLOUR('',#510798); +#512416 = OVER_RIDING_STYLED_ITEM('overriding color',(#512417),#104513, + #512227); +#512417 = PRESENTATION_STYLE_ASSIGNMENT((#512418)); +#512418 = SURFACE_STYLE_USAGE(.BOTH.,#512419); +#512419 = SURFACE_SIDE_STYLE('',(#512420)); +#512420 = SURFACE_STYLE_FILL_AREA(#512421); +#512421 = FILL_AREA_STYLE('',(#512422)); +#512422 = FILL_AREA_STYLE_COLOUR('',#510798); +#512423 = OVER_RIDING_STYLED_ITEM('overriding color',(#512424),#104534, + #512227); +#512424 = PRESENTATION_STYLE_ASSIGNMENT((#512425)); +#512425 = SURFACE_STYLE_USAGE(.BOTH.,#512426); +#512426 = SURFACE_SIDE_STYLE('',(#512427)); +#512427 = SURFACE_STYLE_FILL_AREA(#512428); +#512428 = FILL_AREA_STYLE('',(#512429)); +#512429 = FILL_AREA_STYLE_COLOUR('',#510798); +#512430 = OVER_RIDING_STYLED_ITEM('overriding color',(#512431),#104555, + #512227); +#512431 = PRESENTATION_STYLE_ASSIGNMENT((#512432)); +#512432 = SURFACE_STYLE_USAGE(.BOTH.,#512433); +#512433 = SURFACE_SIDE_STYLE('',(#512434)); +#512434 = SURFACE_STYLE_FILL_AREA(#512435); +#512435 = FILL_AREA_STYLE('',(#512436)); +#512436 = FILL_AREA_STYLE_COLOUR('',#510798); +#512437 = OVER_RIDING_STYLED_ITEM('overriding color',(#512438),#104572, + #512227); +#512438 = PRESENTATION_STYLE_ASSIGNMENT((#512439)); +#512439 = SURFACE_STYLE_USAGE(.BOTH.,#512440); +#512440 = SURFACE_SIDE_STYLE('',(#512441)); +#512441 = SURFACE_STYLE_FILL_AREA(#512442); +#512442 = FILL_AREA_STYLE('',(#512443)); +#512443 = FILL_AREA_STYLE_COLOUR('',#510798); +#512444 = OVER_RIDING_STYLED_ITEM('overriding color',(#512445),#104593, + #512227); +#512445 = PRESENTATION_STYLE_ASSIGNMENT((#512446)); +#512446 = SURFACE_STYLE_USAGE(.BOTH.,#512447); +#512447 = SURFACE_SIDE_STYLE('',(#512448)); +#512448 = SURFACE_STYLE_FILL_AREA(#512449); +#512449 = FILL_AREA_STYLE('',(#512450)); +#512450 = FILL_AREA_STYLE_COLOUR('',#510798); +#512451 = OVER_RIDING_STYLED_ITEM('overriding color',(#512452),#104614, + #512227); +#512452 = PRESENTATION_STYLE_ASSIGNMENT((#512453)); +#512453 = SURFACE_STYLE_USAGE(.BOTH.,#512454); +#512454 = SURFACE_SIDE_STYLE('',(#512455)); +#512455 = SURFACE_STYLE_FILL_AREA(#512456); +#512456 = FILL_AREA_STYLE('',(#512457)); +#512457 = FILL_AREA_STYLE_COLOUR('',#510798); +#512458 = OVER_RIDING_STYLED_ITEM('overriding color',(#512459),#104635, + #512227); +#512459 = PRESENTATION_STYLE_ASSIGNMENT((#512460)); +#512460 = SURFACE_STYLE_USAGE(.BOTH.,#512461); +#512461 = SURFACE_SIDE_STYLE('',(#512462)); +#512462 = SURFACE_STYLE_FILL_AREA(#512463); +#512463 = FILL_AREA_STYLE('',(#512464)); +#512464 = FILL_AREA_STYLE_COLOUR('',#510798); +#512465 = OVER_RIDING_STYLED_ITEM('overriding color',(#512466),#104652, + #512227); +#512466 = PRESENTATION_STYLE_ASSIGNMENT((#512467)); +#512467 = SURFACE_STYLE_USAGE(.BOTH.,#512468); +#512468 = SURFACE_SIDE_STYLE('',(#512469)); +#512469 = SURFACE_STYLE_FILL_AREA(#512470); +#512470 = FILL_AREA_STYLE('',(#512471)); +#512471 = FILL_AREA_STYLE_COLOUR('',#510798); +#512472 = OVER_RIDING_STYLED_ITEM('overriding color',(#512473),#104673, + #512227); +#512473 = PRESENTATION_STYLE_ASSIGNMENT((#512474)); +#512474 = SURFACE_STYLE_USAGE(.BOTH.,#512475); +#512475 = SURFACE_SIDE_STYLE('',(#512476)); +#512476 = SURFACE_STYLE_FILL_AREA(#512477); +#512477 = FILL_AREA_STYLE('',(#512478)); +#512478 = FILL_AREA_STYLE_COLOUR('',#510798); +#512479 = OVER_RIDING_STYLED_ITEM('overriding color',(#512480),#104689, + #512227); +#512480 = PRESENTATION_STYLE_ASSIGNMENT((#512481)); +#512481 = SURFACE_STYLE_USAGE(.BOTH.,#512482); +#512482 = SURFACE_SIDE_STYLE('',(#512483)); +#512483 = SURFACE_STYLE_FILL_AREA(#512484); +#512484 = FILL_AREA_STYLE('',(#512485)); +#512485 = FILL_AREA_STYLE_COLOUR('',#510798); +#512486 = OVER_RIDING_STYLED_ITEM('overriding color',(#512487),#104721, + #512227); +#512487 = PRESENTATION_STYLE_ASSIGNMENT((#512488)); +#512488 = SURFACE_STYLE_USAGE(.BOTH.,#512489); +#512489 = SURFACE_SIDE_STYLE('',(#512490)); +#512490 = SURFACE_STYLE_FILL_AREA(#512491); +#512491 = FILL_AREA_STYLE('',(#512492)); +#512492 = FILL_AREA_STYLE_COLOUR('',#510798); +#512493 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #512494,#512504,#512513,#512522,#512531,#512541,#512550,#512559, + #512568,#512577,#512586,#512595,#512604,#512613,#512622,#512631, + #512640,#512649,#512658,#512667,#512676,#512685,#512694,#512703, + #512712,#512721,#512730,#512739,#512748,#512757,#512766,#512775, + #512784,#512793,#512802,#512811,#512820,#512829,#512838,#512847, + #512856,#512865,#512874,#512883,#512892,#512901,#512910,#512919, + #512928,#512937,#512946,#512955,#512964,#512973,#512982,#512992, + #513001,#513010,#513019),#160251); +#512494 = STYLED_ITEM('color',(#512495),#158565); +#512495 = PRESENTATION_STYLE_ASSIGNMENT((#512496,#512502)); +#512496 = SURFACE_STYLE_USAGE(.BOTH.,#512497); +#512497 = SURFACE_SIDE_STYLE('',(#512498)); +#512498 = SURFACE_STYLE_FILL_AREA(#512499); +#512499 = FILL_AREA_STYLE('',(#512500)); +#512500 = FILL_AREA_STYLE_COLOUR('',#512501); +#512501 = COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626); +#512502 = CURVE_STYLE('',#512503,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512503 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512504 = STYLED_ITEM('color',(#512505),#158619); +#512505 = PRESENTATION_STYLE_ASSIGNMENT((#512506,#512511)); +#512506 = SURFACE_STYLE_USAGE(.BOTH.,#512507); +#512507 = SURFACE_SIDE_STYLE('',(#512508)); +#512508 = SURFACE_STYLE_FILL_AREA(#512509); +#512509 = FILL_AREA_STYLE('',(#512510)); +#512510 = FILL_AREA_STYLE_COLOUR('',#512501); +#512511 = CURVE_STYLE('',#512512,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512512 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512513 = STYLED_ITEM('color',(#512514),#158682); +#512514 = PRESENTATION_STYLE_ASSIGNMENT((#512515,#512520)); +#512515 = SURFACE_STYLE_USAGE(.BOTH.,#512516); +#512516 = SURFACE_SIDE_STYLE('',(#512517)); +#512517 = SURFACE_STYLE_FILL_AREA(#512518); +#512518 = FILL_AREA_STYLE('',(#512519)); +#512519 = FILL_AREA_STYLE_COLOUR('',#512501); +#512520 = CURVE_STYLE('',#512521,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512521 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512522 = STYLED_ITEM('color',(#512523),#158705); +#512523 = PRESENTATION_STYLE_ASSIGNMENT((#512524,#512529)); +#512524 = SURFACE_STYLE_USAGE(.BOTH.,#512525); +#512525 = SURFACE_SIDE_STYLE('',(#512526)); +#512526 = SURFACE_STYLE_FILL_AREA(#512527); +#512527 = FILL_AREA_STYLE('',(#512528)); +#512528 = FILL_AREA_STYLE_COLOUR('',#512501); +#512529 = CURVE_STYLE('',#512530,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512530 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512531 = STYLED_ITEM('color',(#512532),#158735); +#512532 = PRESENTATION_STYLE_ASSIGNMENT((#512533,#512539)); +#512533 = SURFACE_STYLE_USAGE(.BOTH.,#512534); +#512534 = SURFACE_SIDE_STYLE('',(#512535)); +#512535 = SURFACE_STYLE_FILL_AREA(#512536); +#512536 = FILL_AREA_STYLE('',(#512537)); +#512537 = FILL_AREA_STYLE_COLOUR('',#512538); +#512538 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244); +#512539 = CURVE_STYLE('',#512540,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512540 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512541 = STYLED_ITEM('color',(#512542),#158768); +#512542 = PRESENTATION_STYLE_ASSIGNMENT((#512543,#512548)); +#512543 = SURFACE_STYLE_USAGE(.BOTH.,#512544); +#512544 = SURFACE_SIDE_STYLE('',(#512545)); +#512545 = SURFACE_STYLE_FILL_AREA(#512546); +#512546 = FILL_AREA_STYLE('',(#512547)); +#512547 = FILL_AREA_STYLE_COLOUR('',#512501); +#512548 = CURVE_STYLE('',#512549,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512549 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512550 = STYLED_ITEM('color',(#512551),#158798); +#512551 = PRESENTATION_STYLE_ASSIGNMENT((#512552,#512557)); +#512552 = SURFACE_STYLE_USAGE(.BOTH.,#512553); +#512553 = SURFACE_SIDE_STYLE('',(#512554)); +#512554 = SURFACE_STYLE_FILL_AREA(#512555); +#512555 = FILL_AREA_STYLE('',(#512556)); +#512556 = FILL_AREA_STYLE_COLOUR('',#512501); +#512557 = CURVE_STYLE('',#512558,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512558 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512559 = STYLED_ITEM('color',(#512560),#158821); +#512560 = PRESENTATION_STYLE_ASSIGNMENT((#512561,#512566)); +#512561 = SURFACE_STYLE_USAGE(.BOTH.,#512562); +#512562 = SURFACE_SIDE_STYLE('',(#512563)); +#512563 = SURFACE_STYLE_FILL_AREA(#512564); +#512564 = FILL_AREA_STYLE('',(#512565)); +#512565 = FILL_AREA_STYLE_COLOUR('',#512501); +#512566 = CURVE_STYLE('',#512567,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512567 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512568 = STYLED_ITEM('color',(#512569),#158844); +#512569 = PRESENTATION_STYLE_ASSIGNMENT((#512570,#512575)); +#512570 = SURFACE_STYLE_USAGE(.BOTH.,#512571); +#512571 = SURFACE_SIDE_STYLE('',(#512572)); +#512572 = SURFACE_STYLE_FILL_AREA(#512573); +#512573 = FILL_AREA_STYLE('',(#512574)); +#512574 = FILL_AREA_STYLE_COLOUR('',#512501); +#512575 = CURVE_STYLE('',#512576,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512576 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512577 = STYLED_ITEM('color',(#512578),#158867); +#512578 = PRESENTATION_STYLE_ASSIGNMENT((#512579,#512584)); +#512579 = SURFACE_STYLE_USAGE(.BOTH.,#512580); +#512580 = SURFACE_SIDE_STYLE('',(#512581)); +#512581 = SURFACE_STYLE_FILL_AREA(#512582); +#512582 = FILL_AREA_STYLE('',(#512583)); +#512583 = FILL_AREA_STYLE_COLOUR('',#512501); +#512584 = CURVE_STYLE('',#512585,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512585 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512586 = STYLED_ITEM('color',(#512587),#158890); +#512587 = PRESENTATION_STYLE_ASSIGNMENT((#512588,#512593)); +#512588 = SURFACE_STYLE_USAGE(.BOTH.,#512589); +#512589 = SURFACE_SIDE_STYLE('',(#512590)); +#512590 = SURFACE_STYLE_FILL_AREA(#512591); +#512591 = FILL_AREA_STYLE('',(#512592)); +#512592 = FILL_AREA_STYLE_COLOUR('',#512501); +#512593 = CURVE_STYLE('',#512594,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512594 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512595 = STYLED_ITEM('color',(#512596),#158913); +#512596 = PRESENTATION_STYLE_ASSIGNMENT((#512597,#512602)); +#512597 = SURFACE_STYLE_USAGE(.BOTH.,#512598); +#512598 = SURFACE_SIDE_STYLE('',(#512599)); +#512599 = SURFACE_STYLE_FILL_AREA(#512600); +#512600 = FILL_AREA_STYLE('',(#512601)); +#512601 = FILL_AREA_STYLE_COLOUR('',#512501); +#512602 = CURVE_STYLE('',#512603,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512603 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512604 = STYLED_ITEM('color',(#512605),#158946); +#512605 = PRESENTATION_STYLE_ASSIGNMENT((#512606,#512611)); +#512606 = SURFACE_STYLE_USAGE(.BOTH.,#512607); +#512607 = SURFACE_SIDE_STYLE('',(#512608)); +#512608 = SURFACE_STYLE_FILL_AREA(#512609); +#512609 = FILL_AREA_STYLE('',(#512610)); +#512610 = FILL_AREA_STYLE_COLOUR('',#512501); +#512611 = CURVE_STYLE('',#512612,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512612 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512613 = STYLED_ITEM('color',(#512614),#158969); +#512614 = PRESENTATION_STYLE_ASSIGNMENT((#512615,#512620)); +#512615 = SURFACE_STYLE_USAGE(.BOTH.,#512616); +#512616 = SURFACE_SIDE_STYLE('',(#512617)); +#512617 = SURFACE_STYLE_FILL_AREA(#512618); +#512618 = FILL_AREA_STYLE('',(#512619)); +#512619 = FILL_AREA_STYLE_COLOUR('',#512501); +#512620 = CURVE_STYLE('',#512621,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512621 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512622 = STYLED_ITEM('color',(#512623),#158992); +#512623 = PRESENTATION_STYLE_ASSIGNMENT((#512624,#512629)); +#512624 = SURFACE_STYLE_USAGE(.BOTH.,#512625); +#512625 = SURFACE_SIDE_STYLE('',(#512626)); +#512626 = SURFACE_STYLE_FILL_AREA(#512627); +#512627 = FILL_AREA_STYLE('',(#512628)); +#512628 = FILL_AREA_STYLE_COLOUR('',#512501); +#512629 = CURVE_STYLE('',#512630,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512630 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512631 = STYLED_ITEM('color',(#512632),#159080); +#512632 = PRESENTATION_STYLE_ASSIGNMENT((#512633,#512638)); +#512633 = SURFACE_STYLE_USAGE(.BOTH.,#512634); +#512634 = SURFACE_SIDE_STYLE('',(#512635)); +#512635 = SURFACE_STYLE_FILL_AREA(#512636); +#512636 = FILL_AREA_STYLE('',(#512637)); +#512637 = FILL_AREA_STYLE_COLOUR('',#512538); +#512638 = CURVE_STYLE('',#512639,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512639 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512640 = STYLED_ITEM('color',(#512641),#159155); +#512641 = PRESENTATION_STYLE_ASSIGNMENT((#512642,#512647)); +#512642 = SURFACE_STYLE_USAGE(.BOTH.,#512643); +#512643 = SURFACE_SIDE_STYLE('',(#512644)); +#512644 = SURFACE_STYLE_FILL_AREA(#512645); +#512645 = FILL_AREA_STYLE('',(#512646)); +#512646 = FILL_AREA_STYLE_COLOUR('',#512538); +#512647 = CURVE_STYLE('',#512648,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512648 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512649 = STYLED_ITEM('color',(#512650),#159179); +#512650 = PRESENTATION_STYLE_ASSIGNMENT((#512651,#512656)); +#512651 = SURFACE_STYLE_USAGE(.BOTH.,#512652); +#512652 = SURFACE_SIDE_STYLE('',(#512653)); +#512653 = SURFACE_STYLE_FILL_AREA(#512654); +#512654 = FILL_AREA_STYLE('',(#512655)); +#512655 = FILL_AREA_STYLE_COLOUR('',#512538); +#512656 = CURVE_STYLE('',#512657,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512657 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512658 = STYLED_ITEM('color',(#512659),#159247); +#512659 = PRESENTATION_STYLE_ASSIGNMENT((#512660,#512665)); +#512660 = SURFACE_STYLE_USAGE(.BOTH.,#512661); +#512661 = SURFACE_SIDE_STYLE('',(#512662)); +#512662 = SURFACE_STYLE_FILL_AREA(#512663); +#512663 = FILL_AREA_STYLE('',(#512664)); +#512664 = FILL_AREA_STYLE_COLOUR('',#512501); +#512665 = CURVE_STYLE('',#512666,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512666 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512667 = STYLED_ITEM('color',(#512668),#159335); +#512668 = PRESENTATION_STYLE_ASSIGNMENT((#512669,#512674)); +#512669 = SURFACE_STYLE_USAGE(.BOTH.,#512670); +#512670 = SURFACE_SIDE_STYLE('',(#512671)); +#512671 = SURFACE_STYLE_FILL_AREA(#512672); +#512672 = FILL_AREA_STYLE('',(#512673)); +#512673 = FILL_AREA_STYLE_COLOUR('',#512501); +#512674 = CURVE_STYLE('',#512675,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512675 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512676 = STYLED_ITEM('color',(#512677),#159351); +#512677 = PRESENTATION_STYLE_ASSIGNMENT((#512678,#512683)); +#512678 = SURFACE_STYLE_USAGE(.BOTH.,#512679); +#512679 = SURFACE_SIDE_STYLE('',(#512680)); +#512680 = SURFACE_STYLE_FILL_AREA(#512681); +#512681 = FILL_AREA_STYLE('',(#512682)); +#512682 = FILL_AREA_STYLE_COLOUR('',#512501); +#512683 = CURVE_STYLE('',#512684,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512684 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512685 = STYLED_ITEM('color',(#512686),#159367); +#512686 = PRESENTATION_STYLE_ASSIGNMENT((#512687,#512692)); +#512687 = SURFACE_STYLE_USAGE(.BOTH.,#512688); +#512688 = SURFACE_SIDE_STYLE('',(#512689)); +#512689 = SURFACE_STYLE_FILL_AREA(#512690); +#512690 = FILL_AREA_STYLE('',(#512691)); +#512691 = FILL_AREA_STYLE_COLOUR('',#512501); +#512692 = CURVE_STYLE('',#512693,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512693 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512694 = STYLED_ITEM('color',(#512695),#159383); +#512695 = PRESENTATION_STYLE_ASSIGNMENT((#512696,#512701)); +#512696 = SURFACE_STYLE_USAGE(.BOTH.,#512697); +#512697 = SURFACE_SIDE_STYLE('',(#512698)); +#512698 = SURFACE_STYLE_FILL_AREA(#512699); +#512699 = FILL_AREA_STYLE('',(#512700)); +#512700 = FILL_AREA_STYLE_COLOUR('',#512501); +#512701 = CURVE_STYLE('',#512702,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512702 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512703 = STYLED_ITEM('color',(#512704),#159399); +#512704 = PRESENTATION_STYLE_ASSIGNMENT((#512705,#512710)); +#512705 = SURFACE_STYLE_USAGE(.BOTH.,#512706); +#512706 = SURFACE_SIDE_STYLE('',(#512707)); +#512707 = SURFACE_STYLE_FILL_AREA(#512708); +#512708 = FILL_AREA_STYLE('',(#512709)); +#512709 = FILL_AREA_STYLE_COLOUR('',#512501); +#512710 = CURVE_STYLE('',#512711,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512711 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512712 = STYLED_ITEM('color',(#512713),#159416); +#512713 = PRESENTATION_STYLE_ASSIGNMENT((#512714,#512719)); +#512714 = SURFACE_STYLE_USAGE(.BOTH.,#512715); +#512715 = SURFACE_SIDE_STYLE('',(#512716)); +#512716 = SURFACE_STYLE_FILL_AREA(#512717); +#512717 = FILL_AREA_STYLE('',(#512718)); +#512718 = FILL_AREA_STYLE_COLOUR('',#512538); +#512719 = CURVE_STYLE('',#512720,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512720 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512721 = STYLED_ITEM('color',(#512722),#159449); +#512722 = PRESENTATION_STYLE_ASSIGNMENT((#512723,#512728)); +#512723 = SURFACE_STYLE_USAGE(.BOTH.,#512724); +#512724 = SURFACE_SIDE_STYLE('',(#512725)); +#512725 = SURFACE_STYLE_FILL_AREA(#512726); +#512726 = FILL_AREA_STYLE('',(#512727)); +#512727 = FILL_AREA_STYLE_COLOUR('',#512501); +#512728 = CURVE_STYLE('',#512729,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512729 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512730 = STYLED_ITEM('color',(#512731),#159466); +#512731 = PRESENTATION_STYLE_ASSIGNMENT((#512732,#512737)); +#512732 = SURFACE_STYLE_USAGE(.BOTH.,#512733); +#512733 = SURFACE_SIDE_STYLE('',(#512734)); +#512734 = SURFACE_STYLE_FILL_AREA(#512735); +#512735 = FILL_AREA_STYLE('',(#512736)); +#512736 = FILL_AREA_STYLE_COLOUR('',#512538); +#512737 = CURVE_STYLE('',#512738,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512738 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512739 = STYLED_ITEM('color',(#512740),#159488); +#512740 = PRESENTATION_STYLE_ASSIGNMENT((#512741,#512746)); +#512741 = SURFACE_STYLE_USAGE(.BOTH.,#512742); +#512742 = SURFACE_SIDE_STYLE('',(#512743)); +#512743 = SURFACE_STYLE_FILL_AREA(#512744); +#512744 = FILL_AREA_STYLE('',(#512745)); +#512745 = FILL_AREA_STYLE_COLOUR('',#512501); +#512746 = CURVE_STYLE('',#512747,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512747 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512748 = STYLED_ITEM('color',(#512749),#159519); +#512749 = PRESENTATION_STYLE_ASSIGNMENT((#512750,#512755)); +#512750 = SURFACE_STYLE_USAGE(.BOTH.,#512751); +#512751 = SURFACE_SIDE_STYLE('',(#512752)); +#512752 = SURFACE_STYLE_FILL_AREA(#512753); +#512753 = FILL_AREA_STYLE('',(#512754)); +#512754 = FILL_AREA_STYLE_COLOUR('',#512501); +#512755 = CURVE_STYLE('',#512756,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512756 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512757 = STYLED_ITEM('color',(#512758),#159542); +#512758 = PRESENTATION_STYLE_ASSIGNMENT((#512759,#512764)); +#512759 = SURFACE_STYLE_USAGE(.BOTH.,#512760); +#512760 = SURFACE_SIDE_STYLE('',(#512761)); +#512761 = SURFACE_STYLE_FILL_AREA(#512762); +#512762 = FILL_AREA_STYLE('',(#512763)); +#512763 = FILL_AREA_STYLE_COLOUR('',#512501); +#512764 = CURVE_STYLE('',#512765,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512765 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512766 = STYLED_ITEM('color',(#512767),#159565); +#512767 = PRESENTATION_STYLE_ASSIGNMENT((#512768,#512773)); +#512768 = SURFACE_STYLE_USAGE(.BOTH.,#512769); +#512769 = SURFACE_SIDE_STYLE('',(#512770)); +#512770 = SURFACE_STYLE_FILL_AREA(#512771); +#512771 = FILL_AREA_STYLE('',(#512772)); +#512772 = FILL_AREA_STYLE_COLOUR('',#512501); +#512773 = CURVE_STYLE('',#512774,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512774 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512775 = STYLED_ITEM('color',(#512776),#159588); +#512776 = PRESENTATION_STYLE_ASSIGNMENT((#512777,#512782)); +#512777 = SURFACE_STYLE_USAGE(.BOTH.,#512778); +#512778 = SURFACE_SIDE_STYLE('',(#512779)); +#512779 = SURFACE_STYLE_FILL_AREA(#512780); +#512780 = FILL_AREA_STYLE('',(#512781)); +#512781 = FILL_AREA_STYLE_COLOUR('',#512501); +#512782 = CURVE_STYLE('',#512783,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512783 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512784 = STYLED_ITEM('color',(#512785),#159618); +#512785 = PRESENTATION_STYLE_ASSIGNMENT((#512786,#512791)); +#512786 = SURFACE_STYLE_USAGE(.BOTH.,#512787); +#512787 = SURFACE_SIDE_STYLE('',(#512788)); +#512788 = SURFACE_STYLE_FILL_AREA(#512789); +#512789 = FILL_AREA_STYLE('',(#512790)); +#512790 = FILL_AREA_STYLE_COLOUR('',#512538); +#512791 = CURVE_STYLE('',#512792,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512792 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512793 = STYLED_ITEM('color',(#512794),#159635); +#512794 = PRESENTATION_STYLE_ASSIGNMENT((#512795,#512800)); +#512795 = SURFACE_STYLE_USAGE(.BOTH.,#512796); +#512796 = SURFACE_SIDE_STYLE('',(#512797)); +#512797 = SURFACE_STYLE_FILL_AREA(#512798); +#512798 = FILL_AREA_STYLE('',(#512799)); +#512799 = FILL_AREA_STYLE_COLOUR('',#512538); +#512800 = CURVE_STYLE('',#512801,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512801 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512802 = STYLED_ITEM('color',(#512803),#159652); +#512803 = PRESENTATION_STYLE_ASSIGNMENT((#512804,#512809)); +#512804 = SURFACE_STYLE_USAGE(.BOTH.,#512805); +#512805 = SURFACE_SIDE_STYLE('',(#512806)); +#512806 = SURFACE_STYLE_FILL_AREA(#512807); +#512807 = FILL_AREA_STYLE('',(#512808)); +#512808 = FILL_AREA_STYLE_COLOUR('',#512538); +#512809 = CURVE_STYLE('',#512810,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512810 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512811 = STYLED_ITEM('color',(#512812),#159669); +#512812 = PRESENTATION_STYLE_ASSIGNMENT((#512813,#512818)); +#512813 = SURFACE_STYLE_USAGE(.BOTH.,#512814); +#512814 = SURFACE_SIDE_STYLE('',(#512815)); +#512815 = SURFACE_STYLE_FILL_AREA(#512816); +#512816 = FILL_AREA_STYLE('',(#512817)); +#512817 = FILL_AREA_STYLE_COLOUR('',#512538); +#512818 = CURVE_STYLE('',#512819,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512819 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512820 = STYLED_ITEM('color',(#512821),#159686); +#512821 = PRESENTATION_STYLE_ASSIGNMENT((#512822,#512827)); +#512822 = SURFACE_STYLE_USAGE(.BOTH.,#512823); +#512823 = SURFACE_SIDE_STYLE('',(#512824)); +#512824 = SURFACE_STYLE_FILL_AREA(#512825); +#512825 = FILL_AREA_STYLE('',(#512826)); +#512826 = FILL_AREA_STYLE_COLOUR('',#512538); +#512827 = CURVE_STYLE('',#512828,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512828 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512829 = STYLED_ITEM('color',(#512830),#159703); +#512830 = PRESENTATION_STYLE_ASSIGNMENT((#512831,#512836)); +#512831 = SURFACE_STYLE_USAGE(.BOTH.,#512832); +#512832 = SURFACE_SIDE_STYLE('',(#512833)); +#512833 = SURFACE_STYLE_FILL_AREA(#512834); +#512834 = FILL_AREA_STYLE('',(#512835)); +#512835 = FILL_AREA_STYLE_COLOUR('',#512538); +#512836 = CURVE_STYLE('',#512837,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512837 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512838 = STYLED_ITEM('color',(#512839),#159720); +#512839 = PRESENTATION_STYLE_ASSIGNMENT((#512840,#512845)); +#512840 = SURFACE_STYLE_USAGE(.BOTH.,#512841); +#512841 = SURFACE_SIDE_STYLE('',(#512842)); +#512842 = SURFACE_STYLE_FILL_AREA(#512843); +#512843 = FILL_AREA_STYLE('',(#512844)); +#512844 = FILL_AREA_STYLE_COLOUR('',#512538); +#512845 = CURVE_STYLE('',#512846,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512846 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512847 = STYLED_ITEM('color',(#512848),#159737); +#512848 = PRESENTATION_STYLE_ASSIGNMENT((#512849,#512854)); +#512849 = SURFACE_STYLE_USAGE(.BOTH.,#512850); +#512850 = SURFACE_SIDE_STYLE('',(#512851)); +#512851 = SURFACE_STYLE_FILL_AREA(#512852); +#512852 = FILL_AREA_STYLE('',(#512853)); +#512853 = FILL_AREA_STYLE_COLOUR('',#512538); +#512854 = CURVE_STYLE('',#512855,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512855 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512856 = STYLED_ITEM('color',(#512857),#159749); +#512857 = PRESENTATION_STYLE_ASSIGNMENT((#512858,#512863)); +#512858 = SURFACE_STYLE_USAGE(.BOTH.,#512859); +#512859 = SURFACE_SIDE_STYLE('',(#512860)); +#512860 = SURFACE_STYLE_FILL_AREA(#512861); +#512861 = FILL_AREA_STYLE('',(#512862)); +#512862 = FILL_AREA_STYLE_COLOUR('',#512501); +#512863 = CURVE_STYLE('',#512864,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512864 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512865 = STYLED_ITEM('color',(#512866),#159772); +#512866 = PRESENTATION_STYLE_ASSIGNMENT((#512867,#512872)); +#512867 = SURFACE_STYLE_USAGE(.BOTH.,#512868); +#512868 = SURFACE_SIDE_STYLE('',(#512869)); +#512869 = SURFACE_STYLE_FILL_AREA(#512870); +#512870 = FILL_AREA_STYLE('',(#512871)); +#512871 = FILL_AREA_STYLE_COLOUR('',#512501); +#512872 = CURVE_STYLE('',#512873,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512873 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512874 = STYLED_ITEM('color',(#512875),#159795); +#512875 = PRESENTATION_STYLE_ASSIGNMENT((#512876,#512881)); +#512876 = SURFACE_STYLE_USAGE(.BOTH.,#512877); +#512877 = SURFACE_SIDE_STYLE('',(#512878)); +#512878 = SURFACE_STYLE_FILL_AREA(#512879); +#512879 = FILL_AREA_STYLE('',(#512880)); +#512880 = FILL_AREA_STYLE_COLOUR('',#512501); +#512881 = CURVE_STYLE('',#512882,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512882 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512883 = STYLED_ITEM('color',(#512884),#159812); +#512884 = PRESENTATION_STYLE_ASSIGNMENT((#512885,#512890)); +#512885 = SURFACE_STYLE_USAGE(.BOTH.,#512886); +#512886 = SURFACE_SIDE_STYLE('',(#512887)); +#512887 = SURFACE_STYLE_FILL_AREA(#512888); +#512888 = FILL_AREA_STYLE('',(#512889)); +#512889 = FILL_AREA_STYLE_COLOUR('',#512538); +#512890 = CURVE_STYLE('',#512891,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512891 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512892 = STYLED_ITEM('color',(#512893),#159887); +#512893 = PRESENTATION_STYLE_ASSIGNMENT((#512894,#512899)); +#512894 = SURFACE_STYLE_USAGE(.BOTH.,#512895); +#512895 = SURFACE_SIDE_STYLE('',(#512896)); +#512896 = SURFACE_STYLE_FILL_AREA(#512897); +#512897 = FILL_AREA_STYLE('',(#512898)); +#512898 = FILL_AREA_STYLE_COLOUR('',#512538); +#512899 = CURVE_STYLE('',#512900,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512900 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512901 = STYLED_ITEM('color',(#512902),#159911); +#512902 = PRESENTATION_STYLE_ASSIGNMENT((#512903,#512908)); +#512903 = SURFACE_STYLE_USAGE(.BOTH.,#512904); +#512904 = SURFACE_SIDE_STYLE('',(#512905)); +#512905 = SURFACE_STYLE_FILL_AREA(#512906); +#512906 = FILL_AREA_STYLE('',(#512907)); +#512907 = FILL_AREA_STYLE_COLOUR('',#512538); +#512908 = CURVE_STYLE('',#512909,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512909 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512910 = STYLED_ITEM('color',(#512911),#159979); +#512911 = PRESENTATION_STYLE_ASSIGNMENT((#512912,#512917)); +#512912 = SURFACE_STYLE_USAGE(.BOTH.,#512913); +#512913 = SURFACE_SIDE_STYLE('',(#512914)); +#512914 = SURFACE_STYLE_FILL_AREA(#512915); +#512915 = FILL_AREA_STYLE('',(#512916)); +#512916 = FILL_AREA_STYLE_COLOUR('',#512538); +#512917 = CURVE_STYLE('',#512918,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512918 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512919 = STYLED_ITEM('color',(#512920),#159996); +#512920 = PRESENTATION_STYLE_ASSIGNMENT((#512921,#512926)); +#512921 = SURFACE_STYLE_USAGE(.BOTH.,#512922); +#512922 = SURFACE_SIDE_STYLE('',(#512923)); +#512923 = SURFACE_STYLE_FILL_AREA(#512924); +#512924 = FILL_AREA_STYLE('',(#512925)); +#512925 = FILL_AREA_STYLE_COLOUR('',#512501); +#512926 = CURVE_STYLE('',#512927,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#512927 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512928 = STYLED_ITEM('color',(#512929),#160046); +#512929 = PRESENTATION_STYLE_ASSIGNMENT((#512930,#512935)); +#512930 = SURFACE_STYLE_USAGE(.BOTH.,#512931); +#512931 = SURFACE_SIDE_STYLE('',(#512932)); +#512932 = SURFACE_STYLE_FILL_AREA(#512933); +#512933 = FILL_AREA_STYLE('',(#512934)); +#512934 = FILL_AREA_STYLE_COLOUR('',#512538); +#512935 = CURVE_STYLE('',#512936,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512936 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512937 = STYLED_ITEM('color',(#512938),#160063); +#512938 = PRESENTATION_STYLE_ASSIGNMENT((#512939,#512944)); +#512939 = SURFACE_STYLE_USAGE(.BOTH.,#512940); +#512940 = SURFACE_SIDE_STYLE('',(#512941)); +#512941 = SURFACE_STYLE_FILL_AREA(#512942); +#512942 = FILL_AREA_STYLE('',(#512943)); +#512943 = FILL_AREA_STYLE_COLOUR('',#512538); +#512944 = CURVE_STYLE('',#512945,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512945 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512946 = STYLED_ITEM('color',(#512947),#160080); +#512947 = PRESENTATION_STYLE_ASSIGNMENT((#512948,#512953)); +#512948 = SURFACE_STYLE_USAGE(.BOTH.,#512949); +#512949 = SURFACE_SIDE_STYLE('',(#512950)); +#512950 = SURFACE_STYLE_FILL_AREA(#512951); +#512951 = FILL_AREA_STYLE('',(#512952)); +#512952 = FILL_AREA_STYLE_COLOUR('',#512538); +#512953 = CURVE_STYLE('',#512954,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512954 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512955 = STYLED_ITEM('color',(#512956),#160097); +#512956 = PRESENTATION_STYLE_ASSIGNMENT((#512957,#512962)); +#512957 = SURFACE_STYLE_USAGE(.BOTH.,#512958); +#512958 = SURFACE_SIDE_STYLE('',(#512959)); +#512959 = SURFACE_STYLE_FILL_AREA(#512960); +#512960 = FILL_AREA_STYLE('',(#512961)); +#512961 = FILL_AREA_STYLE_COLOUR('',#512538); +#512962 = CURVE_STYLE('',#512963,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512963 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512964 = STYLED_ITEM('color',(#512965),#160114); +#512965 = PRESENTATION_STYLE_ASSIGNMENT((#512966,#512971)); +#512966 = SURFACE_STYLE_USAGE(.BOTH.,#512967); +#512967 = SURFACE_SIDE_STYLE('',(#512968)); +#512968 = SURFACE_STYLE_FILL_AREA(#512969); +#512969 = FILL_AREA_STYLE('',(#512970)); +#512970 = FILL_AREA_STYLE_COLOUR('',#512538); +#512971 = CURVE_STYLE('',#512972,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512972 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512973 = STYLED_ITEM('color',(#512974),#160131); +#512974 = PRESENTATION_STYLE_ASSIGNMENT((#512975,#512980)); +#512975 = SURFACE_STYLE_USAGE(.BOTH.,#512976); +#512976 = SURFACE_SIDE_STYLE('',(#512977)); +#512977 = SURFACE_STYLE_FILL_AREA(#512978); +#512978 = FILL_AREA_STYLE('',(#512979)); +#512979 = FILL_AREA_STYLE_COLOUR('',#512538); +#512980 = CURVE_STYLE('',#512981,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#512981 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512982 = STYLED_ITEM('color',(#512983),#160143); +#512983 = PRESENTATION_STYLE_ASSIGNMENT((#512984,#512990)); +#512984 = SURFACE_STYLE_USAGE(.BOTH.,#512985); +#512985 = SURFACE_SIDE_STYLE('',(#512986)); +#512986 = SURFACE_STYLE_FILL_AREA(#512987); +#512987 = FILL_AREA_STYLE('',(#512988)); +#512988 = FILL_AREA_STYLE_COLOUR('',#512989); +#512989 = COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832); +#512990 = CURVE_STYLE('',#512991,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#512991 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#512992 = STYLED_ITEM('color',(#512993),#160174); +#512993 = PRESENTATION_STYLE_ASSIGNMENT((#512994,#512999)); +#512994 = SURFACE_STYLE_USAGE(.BOTH.,#512995); +#512995 = SURFACE_SIDE_STYLE('',(#512996)); +#512996 = SURFACE_STYLE_FILL_AREA(#512997); +#512997 = FILL_AREA_STYLE('',(#512998)); +#512998 = FILL_AREA_STYLE_COLOUR('',#512989); +#512999 = CURVE_STYLE('',#513000,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513000 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513001 = STYLED_ITEM('color',(#513002),#160198); +#513002 = PRESENTATION_STYLE_ASSIGNMENT((#513003,#513008)); +#513003 = SURFACE_STYLE_USAGE(.BOTH.,#513004); +#513004 = SURFACE_SIDE_STYLE('',(#513005)); +#513005 = SURFACE_STYLE_FILL_AREA(#513006); +#513006 = FILL_AREA_STYLE('',(#513007)); +#513007 = FILL_AREA_STYLE_COLOUR('',#512989); +#513008 = CURVE_STYLE('',#513009,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513009 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513010 = STYLED_ITEM('color',(#513011),#160222); +#513011 = PRESENTATION_STYLE_ASSIGNMENT((#513012,#513017)); +#513012 = SURFACE_STYLE_USAGE(.BOTH.,#513013); +#513013 = SURFACE_SIDE_STYLE('',(#513014)); +#513014 = SURFACE_STYLE_FILL_AREA(#513015); +#513015 = FILL_AREA_STYLE('',(#513016)); +#513016 = FILL_AREA_STYLE_COLOUR('',#512989); +#513017 = CURVE_STYLE('',#513018,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513018 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513019 = STYLED_ITEM('color',(#513020),#160239); +#513020 = PRESENTATION_STYLE_ASSIGNMENT((#513021,#513026)); +#513021 = SURFACE_STYLE_USAGE(.BOTH.,#513022); +#513022 = SURFACE_SIDE_STYLE('',(#513023)); +#513023 = SURFACE_STYLE_FILL_AREA(#513024); +#513024 = FILL_AREA_STYLE('',(#513025)); +#513025 = FILL_AREA_STYLE_COLOUR('',#512989); +#513026 = CURVE_STYLE('',#513027,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513027 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513028 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #513029,#513038,#513047,#513056,#513065,#513074,#513083,#513092, + #513101,#513110,#513119,#513128,#513137,#513146,#513155,#513164, + #513173,#513182,#513191,#513200,#513209,#513218,#513227,#513236, + #513245,#513254,#513263,#513272,#513281,#513290,#513299,#513308, + #513317,#513326,#513335,#513344,#513353,#513362,#513371,#513380, + #513389,#513398,#513407,#513416,#513425,#513434,#513443,#513452, + #513461,#513470,#513479,#513488,#513497,#513506,#513515,#513524, + #513533,#513542,#513551),#167707); +#513029 = STYLED_ITEM('color',(#513030),#166021); +#513030 = PRESENTATION_STYLE_ASSIGNMENT((#513031,#513036)); +#513031 = SURFACE_STYLE_USAGE(.BOTH.,#513032); +#513032 = SURFACE_SIDE_STYLE('',(#513033)); +#513033 = SURFACE_STYLE_FILL_AREA(#513034); +#513034 = FILL_AREA_STYLE('',(#513035)); +#513035 = FILL_AREA_STYLE_COLOUR('',#512501); +#513036 = CURVE_STYLE('',#513037,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513038 = STYLED_ITEM('color',(#513039),#166075); +#513039 = PRESENTATION_STYLE_ASSIGNMENT((#513040,#513045)); +#513040 = SURFACE_STYLE_USAGE(.BOTH.,#513041); +#513041 = SURFACE_SIDE_STYLE('',(#513042)); +#513042 = SURFACE_STYLE_FILL_AREA(#513043); +#513043 = FILL_AREA_STYLE('',(#513044)); +#513044 = FILL_AREA_STYLE_COLOUR('',#512501); +#513045 = CURVE_STYLE('',#513046,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513047 = STYLED_ITEM('color',(#513048),#166138); +#513048 = PRESENTATION_STYLE_ASSIGNMENT((#513049,#513054)); +#513049 = SURFACE_STYLE_USAGE(.BOTH.,#513050); +#513050 = SURFACE_SIDE_STYLE('',(#513051)); +#513051 = SURFACE_STYLE_FILL_AREA(#513052); +#513052 = FILL_AREA_STYLE('',(#513053)); +#513053 = FILL_AREA_STYLE_COLOUR('',#512501); +#513054 = CURVE_STYLE('',#513055,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513056 = STYLED_ITEM('color',(#513057),#166161); +#513057 = PRESENTATION_STYLE_ASSIGNMENT((#513058,#513063)); +#513058 = SURFACE_STYLE_USAGE(.BOTH.,#513059); +#513059 = SURFACE_SIDE_STYLE('',(#513060)); +#513060 = SURFACE_STYLE_FILL_AREA(#513061); +#513061 = FILL_AREA_STYLE('',(#513062)); +#513062 = FILL_AREA_STYLE_COLOUR('',#512501); +#513063 = CURVE_STYLE('',#513064,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513065 = STYLED_ITEM('color',(#513066),#166191); +#513066 = PRESENTATION_STYLE_ASSIGNMENT((#513067,#513072)); +#513067 = SURFACE_STYLE_USAGE(.BOTH.,#513068); +#513068 = SURFACE_SIDE_STYLE('',(#513069)); +#513069 = SURFACE_STYLE_FILL_AREA(#513070); +#513070 = FILL_AREA_STYLE('',(#513071)); +#513071 = FILL_AREA_STYLE_COLOUR('',#512538); +#513072 = CURVE_STYLE('',#513073,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513074 = STYLED_ITEM('color',(#513075),#166224); +#513075 = PRESENTATION_STYLE_ASSIGNMENT((#513076,#513081)); +#513076 = SURFACE_STYLE_USAGE(.BOTH.,#513077); +#513077 = SURFACE_SIDE_STYLE('',(#513078)); +#513078 = SURFACE_STYLE_FILL_AREA(#513079); +#513079 = FILL_AREA_STYLE('',(#513080)); +#513080 = FILL_AREA_STYLE_COLOUR('',#512501); +#513081 = CURVE_STYLE('',#513082,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513083 = STYLED_ITEM('color',(#513084),#166254); +#513084 = PRESENTATION_STYLE_ASSIGNMENT((#513085,#513090)); +#513085 = SURFACE_STYLE_USAGE(.BOTH.,#513086); +#513086 = SURFACE_SIDE_STYLE('',(#513087)); +#513087 = SURFACE_STYLE_FILL_AREA(#513088); +#513088 = FILL_AREA_STYLE('',(#513089)); +#513089 = FILL_AREA_STYLE_COLOUR('',#512501); +#513090 = CURVE_STYLE('',#513091,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513092 = STYLED_ITEM('color',(#513093),#166277); +#513093 = PRESENTATION_STYLE_ASSIGNMENT((#513094,#513099)); +#513094 = SURFACE_STYLE_USAGE(.BOTH.,#513095); +#513095 = SURFACE_SIDE_STYLE('',(#513096)); +#513096 = SURFACE_STYLE_FILL_AREA(#513097); +#513097 = FILL_AREA_STYLE('',(#513098)); +#513098 = FILL_AREA_STYLE_COLOUR('',#512501); +#513099 = CURVE_STYLE('',#513100,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513101 = STYLED_ITEM('color',(#513102),#166300); +#513102 = PRESENTATION_STYLE_ASSIGNMENT((#513103,#513108)); +#513103 = SURFACE_STYLE_USAGE(.BOTH.,#513104); +#513104 = SURFACE_SIDE_STYLE('',(#513105)); +#513105 = SURFACE_STYLE_FILL_AREA(#513106); +#513106 = FILL_AREA_STYLE('',(#513107)); +#513107 = FILL_AREA_STYLE_COLOUR('',#512501); +#513108 = CURVE_STYLE('',#513109,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513110 = STYLED_ITEM('color',(#513111),#166323); +#513111 = PRESENTATION_STYLE_ASSIGNMENT((#513112,#513117)); +#513112 = SURFACE_STYLE_USAGE(.BOTH.,#513113); +#513113 = SURFACE_SIDE_STYLE('',(#513114)); +#513114 = SURFACE_STYLE_FILL_AREA(#513115); +#513115 = FILL_AREA_STYLE('',(#513116)); +#513116 = FILL_AREA_STYLE_COLOUR('',#512501); +#513117 = CURVE_STYLE('',#513118,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513119 = STYLED_ITEM('color',(#513120),#166346); +#513120 = PRESENTATION_STYLE_ASSIGNMENT((#513121,#513126)); +#513121 = SURFACE_STYLE_USAGE(.BOTH.,#513122); +#513122 = SURFACE_SIDE_STYLE('',(#513123)); +#513123 = SURFACE_STYLE_FILL_AREA(#513124); +#513124 = FILL_AREA_STYLE('',(#513125)); +#513125 = FILL_AREA_STYLE_COLOUR('',#512501); +#513126 = CURVE_STYLE('',#513127,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513128 = STYLED_ITEM('color',(#513129),#166369); +#513129 = PRESENTATION_STYLE_ASSIGNMENT((#513130,#513135)); +#513130 = SURFACE_STYLE_USAGE(.BOTH.,#513131); +#513131 = SURFACE_SIDE_STYLE('',(#513132)); +#513132 = SURFACE_STYLE_FILL_AREA(#513133); +#513133 = FILL_AREA_STYLE('',(#513134)); +#513134 = FILL_AREA_STYLE_COLOUR('',#512501); +#513135 = CURVE_STYLE('',#513136,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513137 = STYLED_ITEM('color',(#513138),#166402); +#513138 = PRESENTATION_STYLE_ASSIGNMENT((#513139,#513144)); +#513139 = SURFACE_STYLE_USAGE(.BOTH.,#513140); +#513140 = SURFACE_SIDE_STYLE('',(#513141)); +#513141 = SURFACE_STYLE_FILL_AREA(#513142); +#513142 = FILL_AREA_STYLE('',(#513143)); +#513143 = FILL_AREA_STYLE_COLOUR('',#512501); +#513144 = CURVE_STYLE('',#513145,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513146 = STYLED_ITEM('color',(#513147),#166425); +#513147 = PRESENTATION_STYLE_ASSIGNMENT((#513148,#513153)); +#513148 = SURFACE_STYLE_USAGE(.BOTH.,#513149); +#513149 = SURFACE_SIDE_STYLE('',(#513150)); +#513150 = SURFACE_STYLE_FILL_AREA(#513151); +#513151 = FILL_AREA_STYLE('',(#513152)); +#513152 = FILL_AREA_STYLE_COLOUR('',#512501); +#513153 = CURVE_STYLE('',#513154,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513155 = STYLED_ITEM('color',(#513156),#166448); +#513156 = PRESENTATION_STYLE_ASSIGNMENT((#513157,#513162)); +#513157 = SURFACE_STYLE_USAGE(.BOTH.,#513158); +#513158 = SURFACE_SIDE_STYLE('',(#513159)); +#513159 = SURFACE_STYLE_FILL_AREA(#513160); +#513160 = FILL_AREA_STYLE('',(#513161)); +#513161 = FILL_AREA_STYLE_COLOUR('',#512501); +#513162 = CURVE_STYLE('',#513163,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513164 = STYLED_ITEM('color',(#513165),#166536); +#513165 = PRESENTATION_STYLE_ASSIGNMENT((#513166,#513171)); +#513166 = SURFACE_STYLE_USAGE(.BOTH.,#513167); +#513167 = SURFACE_SIDE_STYLE('',(#513168)); +#513168 = SURFACE_STYLE_FILL_AREA(#513169); +#513169 = FILL_AREA_STYLE('',(#513170)); +#513170 = FILL_AREA_STYLE_COLOUR('',#512538); +#513171 = CURVE_STYLE('',#513172,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513173 = STYLED_ITEM('color',(#513174),#166611); +#513174 = PRESENTATION_STYLE_ASSIGNMENT((#513175,#513180)); +#513175 = SURFACE_STYLE_USAGE(.BOTH.,#513176); +#513176 = SURFACE_SIDE_STYLE('',(#513177)); +#513177 = SURFACE_STYLE_FILL_AREA(#513178); +#513178 = FILL_AREA_STYLE('',(#513179)); +#513179 = FILL_AREA_STYLE_COLOUR('',#512538); +#513180 = CURVE_STYLE('',#513181,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513182 = STYLED_ITEM('color',(#513183),#166635); +#513183 = PRESENTATION_STYLE_ASSIGNMENT((#513184,#513189)); +#513184 = SURFACE_STYLE_USAGE(.BOTH.,#513185); +#513185 = SURFACE_SIDE_STYLE('',(#513186)); +#513186 = SURFACE_STYLE_FILL_AREA(#513187); +#513187 = FILL_AREA_STYLE('',(#513188)); +#513188 = FILL_AREA_STYLE_COLOUR('',#512538); +#513189 = CURVE_STYLE('',#513190,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513191 = STYLED_ITEM('color',(#513192),#166703); +#513192 = PRESENTATION_STYLE_ASSIGNMENT((#513193,#513198)); +#513193 = SURFACE_STYLE_USAGE(.BOTH.,#513194); +#513194 = SURFACE_SIDE_STYLE('',(#513195)); +#513195 = SURFACE_STYLE_FILL_AREA(#513196); +#513196 = FILL_AREA_STYLE('',(#513197)); +#513197 = FILL_AREA_STYLE_COLOUR('',#512501); +#513198 = CURVE_STYLE('',#513199,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513200 = STYLED_ITEM('color',(#513201),#166791); +#513201 = PRESENTATION_STYLE_ASSIGNMENT((#513202,#513207)); +#513202 = SURFACE_STYLE_USAGE(.BOTH.,#513203); +#513203 = SURFACE_SIDE_STYLE('',(#513204)); +#513204 = SURFACE_STYLE_FILL_AREA(#513205); +#513205 = FILL_AREA_STYLE('',(#513206)); +#513206 = FILL_AREA_STYLE_COLOUR('',#512501); +#513207 = CURVE_STYLE('',#513208,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513209 = STYLED_ITEM('color',(#513210),#166807); +#513210 = PRESENTATION_STYLE_ASSIGNMENT((#513211,#513216)); +#513211 = SURFACE_STYLE_USAGE(.BOTH.,#513212); +#513212 = SURFACE_SIDE_STYLE('',(#513213)); +#513213 = SURFACE_STYLE_FILL_AREA(#513214); +#513214 = FILL_AREA_STYLE('',(#513215)); +#513215 = FILL_AREA_STYLE_COLOUR('',#512501); +#513216 = CURVE_STYLE('',#513217,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513218 = STYLED_ITEM('color',(#513219),#166823); +#513219 = PRESENTATION_STYLE_ASSIGNMENT((#513220,#513225)); +#513220 = SURFACE_STYLE_USAGE(.BOTH.,#513221); +#513221 = SURFACE_SIDE_STYLE('',(#513222)); +#513222 = SURFACE_STYLE_FILL_AREA(#513223); +#513223 = FILL_AREA_STYLE('',(#513224)); +#513224 = FILL_AREA_STYLE_COLOUR('',#512501); +#513225 = CURVE_STYLE('',#513226,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513227 = STYLED_ITEM('color',(#513228),#166839); +#513228 = PRESENTATION_STYLE_ASSIGNMENT((#513229,#513234)); +#513229 = SURFACE_STYLE_USAGE(.BOTH.,#513230); +#513230 = SURFACE_SIDE_STYLE('',(#513231)); +#513231 = SURFACE_STYLE_FILL_AREA(#513232); +#513232 = FILL_AREA_STYLE('',(#513233)); +#513233 = FILL_AREA_STYLE_COLOUR('',#512501); +#513234 = CURVE_STYLE('',#513235,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513236 = STYLED_ITEM('color',(#513237),#166855); +#513237 = PRESENTATION_STYLE_ASSIGNMENT((#513238,#513243)); +#513238 = SURFACE_STYLE_USAGE(.BOTH.,#513239); +#513239 = SURFACE_SIDE_STYLE('',(#513240)); +#513240 = SURFACE_STYLE_FILL_AREA(#513241); +#513241 = FILL_AREA_STYLE('',(#513242)); +#513242 = FILL_AREA_STYLE_COLOUR('',#512501); +#513243 = CURVE_STYLE('',#513244,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513245 = STYLED_ITEM('color',(#513246),#166872); +#513246 = PRESENTATION_STYLE_ASSIGNMENT((#513247,#513252)); +#513247 = SURFACE_STYLE_USAGE(.BOTH.,#513248); +#513248 = SURFACE_SIDE_STYLE('',(#513249)); +#513249 = SURFACE_STYLE_FILL_AREA(#513250); +#513250 = FILL_AREA_STYLE('',(#513251)); +#513251 = FILL_AREA_STYLE_COLOUR('',#512538); +#513252 = CURVE_STYLE('',#513253,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513254 = STYLED_ITEM('color',(#513255),#166905); +#513255 = PRESENTATION_STYLE_ASSIGNMENT((#513256,#513261)); +#513256 = SURFACE_STYLE_USAGE(.BOTH.,#513257); +#513257 = SURFACE_SIDE_STYLE('',(#513258)); +#513258 = SURFACE_STYLE_FILL_AREA(#513259); +#513259 = FILL_AREA_STYLE('',(#513260)); +#513260 = FILL_AREA_STYLE_COLOUR('',#512501); +#513261 = CURVE_STYLE('',#513262,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513263 = STYLED_ITEM('color',(#513264),#166922); +#513264 = PRESENTATION_STYLE_ASSIGNMENT((#513265,#513270)); +#513265 = SURFACE_STYLE_USAGE(.BOTH.,#513266); +#513266 = SURFACE_SIDE_STYLE('',(#513267)); +#513267 = SURFACE_STYLE_FILL_AREA(#513268); +#513268 = FILL_AREA_STYLE('',(#513269)); +#513269 = FILL_AREA_STYLE_COLOUR('',#512538); +#513270 = CURVE_STYLE('',#513271,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513272 = STYLED_ITEM('color',(#513273),#166944); +#513273 = PRESENTATION_STYLE_ASSIGNMENT((#513274,#513279)); +#513274 = SURFACE_STYLE_USAGE(.BOTH.,#513275); +#513275 = SURFACE_SIDE_STYLE('',(#513276)); +#513276 = SURFACE_STYLE_FILL_AREA(#513277); +#513277 = FILL_AREA_STYLE('',(#513278)); +#513278 = FILL_AREA_STYLE_COLOUR('',#512501); +#513279 = CURVE_STYLE('',#513280,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513281 = STYLED_ITEM('color',(#513282),#166975); +#513282 = PRESENTATION_STYLE_ASSIGNMENT((#513283,#513288)); +#513283 = SURFACE_STYLE_USAGE(.BOTH.,#513284); +#513284 = SURFACE_SIDE_STYLE('',(#513285)); +#513285 = SURFACE_STYLE_FILL_AREA(#513286); +#513286 = FILL_AREA_STYLE('',(#513287)); +#513287 = FILL_AREA_STYLE_COLOUR('',#512501); +#513288 = CURVE_STYLE('',#513289,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513290 = STYLED_ITEM('color',(#513291),#166998); +#513291 = PRESENTATION_STYLE_ASSIGNMENT((#513292,#513297)); +#513292 = SURFACE_STYLE_USAGE(.BOTH.,#513293); +#513293 = SURFACE_SIDE_STYLE('',(#513294)); +#513294 = SURFACE_STYLE_FILL_AREA(#513295); +#513295 = FILL_AREA_STYLE('',(#513296)); +#513296 = FILL_AREA_STYLE_COLOUR('',#512501); +#513297 = CURVE_STYLE('',#513298,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513299 = STYLED_ITEM('color',(#513300),#167021); +#513300 = PRESENTATION_STYLE_ASSIGNMENT((#513301,#513306)); +#513301 = SURFACE_STYLE_USAGE(.BOTH.,#513302); +#513302 = SURFACE_SIDE_STYLE('',(#513303)); +#513303 = SURFACE_STYLE_FILL_AREA(#513304); +#513304 = FILL_AREA_STYLE('',(#513305)); +#513305 = FILL_AREA_STYLE_COLOUR('',#512501); +#513306 = CURVE_STYLE('',#513307,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513308 = STYLED_ITEM('color',(#513309),#167044); +#513309 = PRESENTATION_STYLE_ASSIGNMENT((#513310,#513315)); +#513310 = SURFACE_STYLE_USAGE(.BOTH.,#513311); +#513311 = SURFACE_SIDE_STYLE('',(#513312)); +#513312 = SURFACE_STYLE_FILL_AREA(#513313); +#513313 = FILL_AREA_STYLE('',(#513314)); +#513314 = FILL_AREA_STYLE_COLOUR('',#512501); +#513315 = CURVE_STYLE('',#513316,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513317 = STYLED_ITEM('color',(#513318),#167074); +#513318 = PRESENTATION_STYLE_ASSIGNMENT((#513319,#513324)); +#513319 = SURFACE_STYLE_USAGE(.BOTH.,#513320); +#513320 = SURFACE_SIDE_STYLE('',(#513321)); +#513321 = SURFACE_STYLE_FILL_AREA(#513322); +#513322 = FILL_AREA_STYLE('',(#513323)); +#513323 = FILL_AREA_STYLE_COLOUR('',#512538); +#513324 = CURVE_STYLE('',#513325,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513326 = STYLED_ITEM('color',(#513327),#167091); +#513327 = PRESENTATION_STYLE_ASSIGNMENT((#513328,#513333)); +#513328 = SURFACE_STYLE_USAGE(.BOTH.,#513329); +#513329 = SURFACE_SIDE_STYLE('',(#513330)); +#513330 = SURFACE_STYLE_FILL_AREA(#513331); +#513331 = FILL_AREA_STYLE('',(#513332)); +#513332 = FILL_AREA_STYLE_COLOUR('',#512538); +#513333 = CURVE_STYLE('',#513334,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513335 = STYLED_ITEM('color',(#513336),#167108); +#513336 = PRESENTATION_STYLE_ASSIGNMENT((#513337,#513342)); +#513337 = SURFACE_STYLE_USAGE(.BOTH.,#513338); +#513338 = SURFACE_SIDE_STYLE('',(#513339)); +#513339 = SURFACE_STYLE_FILL_AREA(#513340); +#513340 = FILL_AREA_STYLE('',(#513341)); +#513341 = FILL_AREA_STYLE_COLOUR('',#512538); +#513342 = CURVE_STYLE('',#513343,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513344 = STYLED_ITEM('color',(#513345),#167125); +#513345 = PRESENTATION_STYLE_ASSIGNMENT((#513346,#513351)); +#513346 = SURFACE_STYLE_USAGE(.BOTH.,#513347); +#513347 = SURFACE_SIDE_STYLE('',(#513348)); +#513348 = SURFACE_STYLE_FILL_AREA(#513349); +#513349 = FILL_AREA_STYLE('',(#513350)); +#513350 = FILL_AREA_STYLE_COLOUR('',#512538); +#513351 = CURVE_STYLE('',#513352,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513353 = STYLED_ITEM('color',(#513354),#167142); +#513354 = PRESENTATION_STYLE_ASSIGNMENT((#513355,#513360)); +#513355 = SURFACE_STYLE_USAGE(.BOTH.,#513356); +#513356 = SURFACE_SIDE_STYLE('',(#513357)); +#513357 = SURFACE_STYLE_FILL_AREA(#513358); +#513358 = FILL_AREA_STYLE('',(#513359)); +#513359 = FILL_AREA_STYLE_COLOUR('',#512538); +#513360 = CURVE_STYLE('',#513361,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513362 = STYLED_ITEM('color',(#513363),#167159); +#513363 = PRESENTATION_STYLE_ASSIGNMENT((#513364,#513369)); +#513364 = SURFACE_STYLE_USAGE(.BOTH.,#513365); +#513365 = SURFACE_SIDE_STYLE('',(#513366)); +#513366 = SURFACE_STYLE_FILL_AREA(#513367); +#513367 = FILL_AREA_STYLE('',(#513368)); +#513368 = FILL_AREA_STYLE_COLOUR('',#512538); +#513369 = CURVE_STYLE('',#513370,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513371 = STYLED_ITEM('color',(#513372),#167176); +#513372 = PRESENTATION_STYLE_ASSIGNMENT((#513373,#513378)); +#513373 = SURFACE_STYLE_USAGE(.BOTH.,#513374); +#513374 = SURFACE_SIDE_STYLE('',(#513375)); +#513375 = SURFACE_STYLE_FILL_AREA(#513376); +#513376 = FILL_AREA_STYLE('',(#513377)); +#513377 = FILL_AREA_STYLE_COLOUR('',#512538); +#513378 = CURVE_STYLE('',#513379,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513380 = STYLED_ITEM('color',(#513381),#167193); +#513381 = PRESENTATION_STYLE_ASSIGNMENT((#513382,#513387)); +#513382 = SURFACE_STYLE_USAGE(.BOTH.,#513383); +#513383 = SURFACE_SIDE_STYLE('',(#513384)); +#513384 = SURFACE_STYLE_FILL_AREA(#513385); +#513385 = FILL_AREA_STYLE('',(#513386)); +#513386 = FILL_AREA_STYLE_COLOUR('',#512538); +#513387 = CURVE_STYLE('',#513388,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513389 = STYLED_ITEM('color',(#513390),#167205); +#513390 = PRESENTATION_STYLE_ASSIGNMENT((#513391,#513396)); +#513391 = SURFACE_STYLE_USAGE(.BOTH.,#513392); +#513392 = SURFACE_SIDE_STYLE('',(#513393)); +#513393 = SURFACE_STYLE_FILL_AREA(#513394); +#513394 = FILL_AREA_STYLE('',(#513395)); +#513395 = FILL_AREA_STYLE_COLOUR('',#512501); +#513396 = CURVE_STYLE('',#513397,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513398 = STYLED_ITEM('color',(#513399),#167228); +#513399 = PRESENTATION_STYLE_ASSIGNMENT((#513400,#513405)); +#513400 = SURFACE_STYLE_USAGE(.BOTH.,#513401); +#513401 = SURFACE_SIDE_STYLE('',(#513402)); +#513402 = SURFACE_STYLE_FILL_AREA(#513403); +#513403 = FILL_AREA_STYLE('',(#513404)); +#513404 = FILL_AREA_STYLE_COLOUR('',#512501); +#513405 = CURVE_STYLE('',#513406,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513407 = STYLED_ITEM('color',(#513408),#167251); +#513408 = PRESENTATION_STYLE_ASSIGNMENT((#513409,#513414)); +#513409 = SURFACE_STYLE_USAGE(.BOTH.,#513410); +#513410 = SURFACE_SIDE_STYLE('',(#513411)); +#513411 = SURFACE_STYLE_FILL_AREA(#513412); +#513412 = FILL_AREA_STYLE('',(#513413)); +#513413 = FILL_AREA_STYLE_COLOUR('',#512501); +#513414 = CURVE_STYLE('',#513415,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513416 = STYLED_ITEM('color',(#513417),#167268); +#513417 = PRESENTATION_STYLE_ASSIGNMENT((#513418,#513423)); +#513418 = SURFACE_STYLE_USAGE(.BOTH.,#513419); +#513419 = SURFACE_SIDE_STYLE('',(#513420)); +#513420 = SURFACE_STYLE_FILL_AREA(#513421); +#513421 = FILL_AREA_STYLE('',(#513422)); +#513422 = FILL_AREA_STYLE_COLOUR('',#512538); +#513423 = CURVE_STYLE('',#513424,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513425 = STYLED_ITEM('color',(#513426),#167343); +#513426 = PRESENTATION_STYLE_ASSIGNMENT((#513427,#513432)); +#513427 = SURFACE_STYLE_USAGE(.BOTH.,#513428); +#513428 = SURFACE_SIDE_STYLE('',(#513429)); +#513429 = SURFACE_STYLE_FILL_AREA(#513430); +#513430 = FILL_AREA_STYLE('',(#513431)); +#513431 = FILL_AREA_STYLE_COLOUR('',#512538); +#513432 = CURVE_STYLE('',#513433,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513434 = STYLED_ITEM('color',(#513435),#167367); +#513435 = PRESENTATION_STYLE_ASSIGNMENT((#513436,#513441)); +#513436 = SURFACE_STYLE_USAGE(.BOTH.,#513437); +#513437 = SURFACE_SIDE_STYLE('',(#513438)); +#513438 = SURFACE_STYLE_FILL_AREA(#513439); +#513439 = FILL_AREA_STYLE('',(#513440)); +#513440 = FILL_AREA_STYLE_COLOUR('',#512538); +#513441 = CURVE_STYLE('',#513442,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513443 = STYLED_ITEM('color',(#513444),#167435); +#513444 = PRESENTATION_STYLE_ASSIGNMENT((#513445,#513450)); +#513445 = SURFACE_STYLE_USAGE(.BOTH.,#513446); +#513446 = SURFACE_SIDE_STYLE('',(#513447)); +#513447 = SURFACE_STYLE_FILL_AREA(#513448); +#513448 = FILL_AREA_STYLE('',(#513449)); +#513449 = FILL_AREA_STYLE_COLOUR('',#512538); +#513450 = CURVE_STYLE('',#513451,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513452 = STYLED_ITEM('color',(#513453),#167452); +#513453 = PRESENTATION_STYLE_ASSIGNMENT((#513454,#513459)); +#513454 = SURFACE_STYLE_USAGE(.BOTH.,#513455); +#513455 = SURFACE_SIDE_STYLE('',(#513456)); +#513456 = SURFACE_STYLE_FILL_AREA(#513457); +#513457 = FILL_AREA_STYLE('',(#513458)); +#513458 = FILL_AREA_STYLE_COLOUR('',#512501); +#513459 = CURVE_STYLE('',#513460,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#513460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513461 = STYLED_ITEM('color',(#513462),#167502); +#513462 = PRESENTATION_STYLE_ASSIGNMENT((#513463,#513468)); +#513463 = SURFACE_STYLE_USAGE(.BOTH.,#513464); +#513464 = SURFACE_SIDE_STYLE('',(#513465)); +#513465 = SURFACE_STYLE_FILL_AREA(#513466); +#513466 = FILL_AREA_STYLE('',(#513467)); +#513467 = FILL_AREA_STYLE_COLOUR('',#512538); +#513468 = CURVE_STYLE('',#513469,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513470 = STYLED_ITEM('color',(#513471),#167519); +#513471 = PRESENTATION_STYLE_ASSIGNMENT((#513472,#513477)); +#513472 = SURFACE_STYLE_USAGE(.BOTH.,#513473); +#513473 = SURFACE_SIDE_STYLE('',(#513474)); +#513474 = SURFACE_STYLE_FILL_AREA(#513475); +#513475 = FILL_AREA_STYLE('',(#513476)); +#513476 = FILL_AREA_STYLE_COLOUR('',#512538); +#513477 = CURVE_STYLE('',#513478,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513479 = STYLED_ITEM('color',(#513480),#167536); +#513480 = PRESENTATION_STYLE_ASSIGNMENT((#513481,#513486)); +#513481 = SURFACE_STYLE_USAGE(.BOTH.,#513482); +#513482 = SURFACE_SIDE_STYLE('',(#513483)); +#513483 = SURFACE_STYLE_FILL_AREA(#513484); +#513484 = FILL_AREA_STYLE('',(#513485)); +#513485 = FILL_AREA_STYLE_COLOUR('',#512538); +#513486 = CURVE_STYLE('',#513487,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513488 = STYLED_ITEM('color',(#513489),#167553); +#513489 = PRESENTATION_STYLE_ASSIGNMENT((#513490,#513495)); +#513490 = SURFACE_STYLE_USAGE(.BOTH.,#513491); +#513491 = SURFACE_SIDE_STYLE('',(#513492)); +#513492 = SURFACE_STYLE_FILL_AREA(#513493); +#513493 = FILL_AREA_STYLE('',(#513494)); +#513494 = FILL_AREA_STYLE_COLOUR('',#512538); +#513495 = CURVE_STYLE('',#513496,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513497 = STYLED_ITEM('color',(#513498),#167570); +#513498 = PRESENTATION_STYLE_ASSIGNMENT((#513499,#513504)); +#513499 = SURFACE_STYLE_USAGE(.BOTH.,#513500); +#513500 = SURFACE_SIDE_STYLE('',(#513501)); +#513501 = SURFACE_STYLE_FILL_AREA(#513502); +#513502 = FILL_AREA_STYLE('',(#513503)); +#513503 = FILL_AREA_STYLE_COLOUR('',#512538); +#513504 = CURVE_STYLE('',#513505,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513506 = STYLED_ITEM('color',(#513507),#167587); +#513507 = PRESENTATION_STYLE_ASSIGNMENT((#513508,#513513)); +#513508 = SURFACE_STYLE_USAGE(.BOTH.,#513509); +#513509 = SURFACE_SIDE_STYLE('',(#513510)); +#513510 = SURFACE_STYLE_FILL_AREA(#513511); +#513511 = FILL_AREA_STYLE('',(#513512)); +#513512 = FILL_AREA_STYLE_COLOUR('',#512538); +#513513 = CURVE_STYLE('',#513514,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513515 = STYLED_ITEM('color',(#513516),#167599); +#513516 = PRESENTATION_STYLE_ASSIGNMENT((#513517,#513522)); +#513517 = SURFACE_STYLE_USAGE(.BOTH.,#513518); +#513518 = SURFACE_SIDE_STYLE('',(#513519)); +#513519 = SURFACE_STYLE_FILL_AREA(#513520); +#513520 = FILL_AREA_STYLE('',(#513521)); +#513521 = FILL_AREA_STYLE_COLOUR('',#512989); +#513522 = CURVE_STYLE('',#513523,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513524 = STYLED_ITEM('color',(#513525),#167630); +#513525 = PRESENTATION_STYLE_ASSIGNMENT((#513526,#513531)); +#513526 = SURFACE_STYLE_USAGE(.BOTH.,#513527); +#513527 = SURFACE_SIDE_STYLE('',(#513528)); +#513528 = SURFACE_STYLE_FILL_AREA(#513529); +#513529 = FILL_AREA_STYLE('',(#513530)); +#513530 = FILL_AREA_STYLE_COLOUR('',#512989); +#513531 = CURVE_STYLE('',#513532,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513533 = STYLED_ITEM('color',(#513534),#167654); +#513534 = PRESENTATION_STYLE_ASSIGNMENT((#513535,#513540)); +#513535 = SURFACE_STYLE_USAGE(.BOTH.,#513536); +#513536 = SURFACE_SIDE_STYLE('',(#513537)); +#513537 = SURFACE_STYLE_FILL_AREA(#513538); +#513538 = FILL_AREA_STYLE('',(#513539)); +#513539 = FILL_AREA_STYLE_COLOUR('',#512989); +#513540 = CURVE_STYLE('',#513541,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513542 = STYLED_ITEM('color',(#513543),#167678); +#513543 = PRESENTATION_STYLE_ASSIGNMENT((#513544,#513549)); +#513544 = SURFACE_STYLE_USAGE(.BOTH.,#513545); +#513545 = SURFACE_SIDE_STYLE('',(#513546)); +#513546 = SURFACE_STYLE_FILL_AREA(#513547); +#513547 = FILL_AREA_STYLE('',(#513548)); +#513548 = FILL_AREA_STYLE_COLOUR('',#512989); +#513549 = CURVE_STYLE('',#513550,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513551 = STYLED_ITEM('color',(#513552),#167695); +#513552 = PRESENTATION_STYLE_ASSIGNMENT((#513553,#513558)); +#513553 = SURFACE_STYLE_USAGE(.BOTH.,#513554); +#513554 = SURFACE_SIDE_STYLE('',(#513555)); +#513555 = SURFACE_STYLE_FILL_AREA(#513556); +#513556 = FILL_AREA_STYLE('',(#513557)); +#513557 = FILL_AREA_STYLE_COLOUR('',#512989); +#513558 = CURVE_STYLE('',#513559,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#513559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513560 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #513561,#513571,#513581,#513590,#513599,#513608,#513617,#513626, + #513635,#513644,#513653,#513662,#513671,#513680,#513689,#513698, + #513707,#513716,#513725,#513734,#513743,#513752,#513761,#513770, + #513779,#513788,#513797,#513806,#513815,#513824,#513833,#513842, + #513851,#513860,#513869,#513878,#513887,#513896,#513905,#513914, + #513923,#513932,#513941,#513950,#513959,#513968,#513977,#513986, + #513995,#514004,#514013,#514022,#514031,#514040,#514049,#514058, + #514067,#514076,#514085,#514094,#514103,#514112,#514121,#514130, + #514139,#514148,#514157,#514166,#514175,#514184,#514193,#514202, + #514211,#514220,#514229,#514238,#514247,#514256,#514265,#514274), + #70175); +#513561 = STYLED_ITEM('color',(#513562),#68550); +#513562 = PRESENTATION_STYLE_ASSIGNMENT((#513563,#513569)); +#513563 = SURFACE_STYLE_USAGE(.BOTH.,#513564); +#513564 = SURFACE_SIDE_STYLE('',(#513565)); +#513565 = SURFACE_STYLE_FILL_AREA(#513566); +#513566 = FILL_AREA_STYLE('',(#513567)); +#513567 = FILL_AREA_STYLE_COLOUR('',#513568); +#513568 = COLOUR_RGB('',0.137000000793,0.401999991578,0.726999997272); +#513569 = CURVE_STYLE('',#513570,POSITIVE_LENGTH_MEASURE(0.1),#513568); +#513570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513571 = STYLED_ITEM('color',(#513572),#68567); +#513572 = PRESENTATION_STYLE_ASSIGNMENT((#513573,#513579)); +#513573 = SURFACE_STYLE_USAGE(.BOTH.,#513574); +#513574 = SURFACE_SIDE_STYLE('',(#513575)); +#513575 = SURFACE_STYLE_FILL_AREA(#513576); +#513576 = FILL_AREA_STYLE('',(#513577)); +#513577 = FILL_AREA_STYLE_COLOUR('',#513578); +#513578 = COLOUR_RGB('',0.894999966383,0.890999961016,0.813000030345); +#513579 = CURVE_STYLE('',#513580,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513581 = STYLED_ITEM('color',(#513582),#68592); +#513582 = PRESENTATION_STYLE_ASSIGNMENT((#513583,#513588)); +#513583 = SURFACE_STYLE_USAGE(.BOTH.,#513584); +#513584 = SURFACE_SIDE_STYLE('',(#513585)); +#513585 = SURFACE_STYLE_FILL_AREA(#513586); +#513586 = FILL_AREA_STYLE('',(#513587)); +#513587 = FILL_AREA_STYLE_COLOUR('',#513578); +#513588 = CURVE_STYLE('',#513589,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513590 = STYLED_ITEM('color',(#513591),#68617); +#513591 = PRESENTATION_STYLE_ASSIGNMENT((#513592,#513597)); +#513592 = SURFACE_STYLE_USAGE(.BOTH.,#513593); +#513593 = SURFACE_SIDE_STYLE('',(#513594)); +#513594 = SURFACE_STYLE_FILL_AREA(#513595); +#513595 = FILL_AREA_STYLE('',(#513596)); +#513596 = FILL_AREA_STYLE_COLOUR('',#513578); +#513597 = CURVE_STYLE('',#513598,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513599 = STYLED_ITEM('color',(#513600),#68668); +#513600 = PRESENTATION_STYLE_ASSIGNMENT((#513601,#513606)); +#513601 = SURFACE_STYLE_USAGE(.BOTH.,#513602); +#513602 = SURFACE_SIDE_STYLE('',(#513603)); +#513603 = SURFACE_STYLE_FILL_AREA(#513604); +#513604 = FILL_AREA_STYLE('',(#513605)); +#513605 = FILL_AREA_STYLE_COLOUR('',#513578); +#513606 = CURVE_STYLE('',#513607,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513608 = STYLED_ITEM('color',(#513609),#68701); +#513609 = PRESENTATION_STYLE_ASSIGNMENT((#513610,#513615)); +#513610 = SURFACE_STYLE_USAGE(.BOTH.,#513611); +#513611 = SURFACE_SIDE_STYLE('',(#513612)); +#513612 = SURFACE_STYLE_FILL_AREA(#513613); +#513613 = FILL_AREA_STYLE('',(#513614)); +#513614 = FILL_AREA_STYLE_COLOUR('',#513578); +#513615 = CURVE_STYLE('',#513616,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513617 = STYLED_ITEM('color',(#513618),#68726); +#513618 = PRESENTATION_STYLE_ASSIGNMENT((#513619,#513624)); +#513619 = SURFACE_STYLE_USAGE(.BOTH.,#513620); +#513620 = SURFACE_SIDE_STYLE('',(#513621)); +#513621 = SURFACE_STYLE_FILL_AREA(#513622); +#513622 = FILL_AREA_STYLE('',(#513623)); +#513623 = FILL_AREA_STYLE_COLOUR('',#513578); +#513624 = CURVE_STYLE('',#513625,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513626 = STYLED_ITEM('color',(#513627),#68751); +#513627 = PRESENTATION_STYLE_ASSIGNMENT((#513628,#513633)); +#513628 = SURFACE_STYLE_USAGE(.BOTH.,#513629); +#513629 = SURFACE_SIDE_STYLE('',(#513630)); +#513630 = SURFACE_STYLE_FILL_AREA(#513631); +#513631 = FILL_AREA_STYLE('',(#513632)); +#513632 = FILL_AREA_STYLE_COLOUR('',#513578); +#513633 = CURVE_STYLE('',#513634,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513635 = STYLED_ITEM('color',(#513636),#68776); +#513636 = PRESENTATION_STYLE_ASSIGNMENT((#513637,#513642)); +#513637 = SURFACE_STYLE_USAGE(.BOTH.,#513638); +#513638 = SURFACE_SIDE_STYLE('',(#513639)); +#513639 = SURFACE_STYLE_FILL_AREA(#513640); +#513640 = FILL_AREA_STYLE('',(#513641)); +#513641 = FILL_AREA_STYLE_COLOUR('',#513578); +#513642 = CURVE_STYLE('',#513643,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513644 = STYLED_ITEM('color',(#513645),#68793); +#513645 = PRESENTATION_STYLE_ASSIGNMENT((#513646,#513651)); +#513646 = SURFACE_STYLE_USAGE(.BOTH.,#513647); +#513647 = SURFACE_SIDE_STYLE('',(#513648)); +#513648 = SURFACE_STYLE_FILL_AREA(#513649); +#513649 = FILL_AREA_STYLE('',(#513650)); +#513650 = FILL_AREA_STYLE_COLOUR('',#513578); +#513651 = CURVE_STYLE('',#513652,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513653 = OVER_RIDING_STYLED_ITEM('overriding color',(#513654),#68814, + #513644); +#513654 = PRESENTATION_STYLE_ASSIGNMENT((#513655,#513660)); +#513655 = SURFACE_STYLE_USAGE(.BOTH.,#513656); +#513656 = SURFACE_SIDE_STYLE('',(#513657)); +#513657 = SURFACE_STYLE_FILL_AREA(#513658); +#513658 = FILL_AREA_STYLE('',(#513659)); +#513659 = FILL_AREA_STYLE_COLOUR('',#512538); +#513660 = CURVE_STYLE('',#513661,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513662 = OVER_RIDING_STYLED_ITEM('overriding color',(#513663),#68822, + #513644); +#513663 = PRESENTATION_STYLE_ASSIGNMENT((#513664,#513669)); +#513664 = SURFACE_STYLE_USAGE(.BOTH.,#513665); +#513665 = SURFACE_SIDE_STYLE('',(#513666)); +#513666 = SURFACE_STYLE_FILL_AREA(#513667); +#513667 = FILL_AREA_STYLE('',(#513668)); +#513668 = FILL_AREA_STYLE_COLOUR('',#512538); +#513669 = CURVE_STYLE('',#513670,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513671 = OVER_RIDING_STYLED_ITEM('overriding color',(#513672),#68830, + #513644); +#513672 = PRESENTATION_STYLE_ASSIGNMENT((#513673,#513678)); +#513673 = SURFACE_STYLE_USAGE(.BOTH.,#513674); +#513674 = SURFACE_SIDE_STYLE('',(#513675)); +#513675 = SURFACE_STYLE_FILL_AREA(#513676); +#513676 = FILL_AREA_STYLE('',(#513677)); +#513677 = FILL_AREA_STYLE_COLOUR('',#512538); +#513678 = CURVE_STYLE('',#513679,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513680 = OVER_RIDING_STYLED_ITEM('overriding color',(#513681),#68846, + #513644); +#513681 = PRESENTATION_STYLE_ASSIGNMENT((#513682,#513687)); +#513682 = SURFACE_STYLE_USAGE(.BOTH.,#513683); +#513683 = SURFACE_SIDE_STYLE('',(#513684)); +#513684 = SURFACE_STYLE_FILL_AREA(#513685); +#513685 = FILL_AREA_STYLE('',(#513686)); +#513686 = FILL_AREA_STYLE_COLOUR('',#512538); +#513687 = CURVE_STYLE('',#513688,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513689 = OVER_RIDING_STYLED_ITEM('overriding color',(#513690),#68854, + #513644); +#513690 = PRESENTATION_STYLE_ASSIGNMENT((#513691,#513696)); +#513691 = SURFACE_STYLE_USAGE(.BOTH.,#513692); +#513692 = SURFACE_SIDE_STYLE('',(#513693)); +#513693 = SURFACE_STYLE_FILL_AREA(#513694); +#513694 = FILL_AREA_STYLE('',(#513695)); +#513695 = FILL_AREA_STYLE_COLOUR('',#512538); +#513696 = CURVE_STYLE('',#513697,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513698 = OVER_RIDING_STYLED_ITEM('overriding color',(#513699),#68862, + #513644); +#513699 = PRESENTATION_STYLE_ASSIGNMENT((#513700,#513705)); +#513700 = SURFACE_STYLE_USAGE(.BOTH.,#513701); +#513701 = SURFACE_SIDE_STYLE('',(#513702)); +#513702 = SURFACE_STYLE_FILL_AREA(#513703); +#513703 = FILL_AREA_STYLE('',(#513704)); +#513704 = FILL_AREA_STYLE_COLOUR('',#512538); +#513705 = CURVE_STYLE('',#513706,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513707 = STYLED_ITEM('color',(#513708),#68904); +#513708 = PRESENTATION_STYLE_ASSIGNMENT((#513709,#513714)); +#513709 = SURFACE_STYLE_USAGE(.BOTH.,#513710); +#513710 = SURFACE_SIDE_STYLE('',(#513711)); +#513711 = SURFACE_STYLE_FILL_AREA(#513712); +#513712 = FILL_AREA_STYLE('',(#513713)); +#513713 = FILL_AREA_STYLE_COLOUR('',#513578); +#513714 = CURVE_STYLE('',#513715,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513716 = STYLED_ITEM('color',(#513717),#68928); +#513717 = PRESENTATION_STYLE_ASSIGNMENT((#513718,#513723)); +#513718 = SURFACE_STYLE_USAGE(.BOTH.,#513719); +#513719 = SURFACE_SIDE_STYLE('',(#513720)); +#513720 = SURFACE_STYLE_FILL_AREA(#513721); +#513721 = FILL_AREA_STYLE('',(#513722)); +#513722 = FILL_AREA_STYLE_COLOUR('',#513578); +#513723 = CURVE_STYLE('',#513724,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513725 = STYLED_ITEM('color',(#513726),#68952); +#513726 = PRESENTATION_STYLE_ASSIGNMENT((#513727,#513732)); +#513727 = SURFACE_STYLE_USAGE(.BOTH.,#513728); +#513728 = SURFACE_SIDE_STYLE('',(#513729)); +#513729 = SURFACE_STYLE_FILL_AREA(#513730); +#513730 = FILL_AREA_STYLE('',(#513731)); +#513731 = FILL_AREA_STYLE_COLOUR('',#513578); +#513732 = CURVE_STYLE('',#513733,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513734 = STYLED_ITEM('color',(#513735),#68983); +#513735 = PRESENTATION_STYLE_ASSIGNMENT((#513736,#513741)); +#513736 = SURFACE_STYLE_USAGE(.BOTH.,#513737); +#513737 = SURFACE_SIDE_STYLE('',(#513738)); +#513738 = SURFACE_STYLE_FILL_AREA(#513739); +#513739 = FILL_AREA_STYLE('',(#513740)); +#513740 = FILL_AREA_STYLE_COLOUR('',#513578); +#513741 = CURVE_STYLE('',#513742,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513743 = OVER_RIDING_STYLED_ITEM('overriding color',(#513744),#68998, + #513734); +#513744 = PRESENTATION_STYLE_ASSIGNMENT((#513745,#513750)); +#513745 = SURFACE_STYLE_USAGE(.BOTH.,#513746); +#513746 = SURFACE_SIDE_STYLE('',(#513747)); +#513747 = SURFACE_STYLE_FILL_AREA(#513748); +#513748 = FILL_AREA_STYLE('',(#513749)); +#513749 = FILL_AREA_STYLE_COLOUR('',#512538); +#513750 = CURVE_STYLE('',#513751,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513752 = OVER_RIDING_STYLED_ITEM('overriding color',(#513753),#69006, + #513734); +#513753 = PRESENTATION_STYLE_ASSIGNMENT((#513754,#513759)); +#513754 = SURFACE_STYLE_USAGE(.BOTH.,#513755); +#513755 = SURFACE_SIDE_STYLE('',(#513756)); +#513756 = SURFACE_STYLE_FILL_AREA(#513757); +#513757 = FILL_AREA_STYLE('',(#513758)); +#513758 = FILL_AREA_STYLE_COLOUR('',#512538); +#513759 = CURVE_STYLE('',#513760,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513761 = OVER_RIDING_STYLED_ITEM('overriding color',(#513762),#69014, + #513734); +#513762 = PRESENTATION_STYLE_ASSIGNMENT((#513763,#513768)); +#513763 = SURFACE_STYLE_USAGE(.BOTH.,#513764); +#513764 = SURFACE_SIDE_STYLE('',(#513765)); +#513765 = SURFACE_STYLE_FILL_AREA(#513766); +#513766 = FILL_AREA_STYLE('',(#513767)); +#513767 = FILL_AREA_STYLE_COLOUR('',#512538); +#513768 = CURVE_STYLE('',#513769,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513770 = OVER_RIDING_STYLED_ITEM('overriding color',(#513771),#69030, + #513734); +#513771 = PRESENTATION_STYLE_ASSIGNMENT((#513772,#513777)); +#513772 = SURFACE_STYLE_USAGE(.BOTH.,#513773); +#513773 = SURFACE_SIDE_STYLE('',(#513774)); +#513774 = SURFACE_STYLE_FILL_AREA(#513775); +#513775 = FILL_AREA_STYLE('',(#513776)); +#513776 = FILL_AREA_STYLE_COLOUR('',#512538); +#513777 = CURVE_STYLE('',#513778,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513779 = OVER_RIDING_STYLED_ITEM('overriding color',(#513780),#69038, + #513734); +#513780 = PRESENTATION_STYLE_ASSIGNMENT((#513781,#513786)); +#513781 = SURFACE_STYLE_USAGE(.BOTH.,#513782); +#513782 = SURFACE_SIDE_STYLE('',(#513783)); +#513783 = SURFACE_STYLE_FILL_AREA(#513784); +#513784 = FILL_AREA_STYLE('',(#513785)); +#513785 = FILL_AREA_STYLE_COLOUR('',#512538); +#513786 = CURVE_STYLE('',#513787,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513788 = OVER_RIDING_STYLED_ITEM('overriding color',(#513789),#69046, + #513734); +#513789 = PRESENTATION_STYLE_ASSIGNMENT((#513790,#513795)); +#513790 = SURFACE_STYLE_USAGE(.BOTH.,#513791); +#513791 = SURFACE_SIDE_STYLE('',(#513792)); +#513792 = SURFACE_STYLE_FILL_AREA(#513793); +#513793 = FILL_AREA_STYLE('',(#513794)); +#513794 = FILL_AREA_STYLE_COLOUR('',#512538); +#513795 = CURVE_STYLE('',#513796,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513797 = STYLED_ITEM('color',(#513798),#69064); +#513798 = PRESENTATION_STYLE_ASSIGNMENT((#513799,#513804)); +#513799 = SURFACE_STYLE_USAGE(.BOTH.,#513800); +#513800 = SURFACE_SIDE_STYLE('',(#513801)); +#513801 = SURFACE_STYLE_FILL_AREA(#513802); +#513802 = FILL_AREA_STYLE('',(#513803)); +#513803 = FILL_AREA_STYLE_COLOUR('',#513578); +#513804 = CURVE_STYLE('',#513805,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513806 = STYLED_ITEM('color',(#513807),#69075); +#513807 = PRESENTATION_STYLE_ASSIGNMENT((#513808,#513813)); +#513808 = SURFACE_STYLE_USAGE(.BOTH.,#513809); +#513809 = SURFACE_SIDE_STYLE('',(#513810)); +#513810 = SURFACE_STYLE_FILL_AREA(#513811); +#513811 = FILL_AREA_STYLE('',(#513812)); +#513812 = FILL_AREA_STYLE_COLOUR('',#513578); +#513813 = CURVE_STYLE('',#513814,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#513814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513815 = OVER_RIDING_STYLED_ITEM('overriding color',(#513816),#69082, + #513806); +#513816 = PRESENTATION_STYLE_ASSIGNMENT((#513817,#513822)); +#513817 = SURFACE_STYLE_USAGE(.BOTH.,#513818); +#513818 = SURFACE_SIDE_STYLE('',(#513819)); +#513819 = SURFACE_STYLE_FILL_AREA(#513820); +#513820 = FILL_AREA_STYLE('',(#513821)); +#513821 = FILL_AREA_STYLE_COLOUR('',#512538); +#513822 = CURVE_STYLE('',#513823,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513824 = OVER_RIDING_STYLED_ITEM('overriding color',(#513825),#69098, + #513806); +#513825 = PRESENTATION_STYLE_ASSIGNMENT((#513826,#513831)); +#513826 = SURFACE_STYLE_USAGE(.BOTH.,#513827); +#513827 = SURFACE_SIDE_STYLE('',(#513828)); +#513828 = SURFACE_STYLE_FILL_AREA(#513829); +#513829 = FILL_AREA_STYLE('',(#513830)); +#513830 = FILL_AREA_STYLE_COLOUR('',#512538); +#513831 = CURVE_STYLE('',#513832,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513833 = OVER_RIDING_STYLED_ITEM('overriding color',(#513834),#69106, + #513806); +#513834 = PRESENTATION_STYLE_ASSIGNMENT((#513835,#513840)); +#513835 = SURFACE_STYLE_USAGE(.BOTH.,#513836); +#513836 = SURFACE_SIDE_STYLE('',(#513837)); +#513837 = SURFACE_STYLE_FILL_AREA(#513838); +#513838 = FILL_AREA_STYLE('',(#513839)); +#513839 = FILL_AREA_STYLE_COLOUR('',#512538); +#513840 = CURVE_STYLE('',#513841,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513842 = OVER_RIDING_STYLED_ITEM('overriding color',(#513843),#69114, + #513806); +#513843 = PRESENTATION_STYLE_ASSIGNMENT((#513844,#513849)); +#513844 = SURFACE_STYLE_USAGE(.BOTH.,#513845); +#513845 = SURFACE_SIDE_STYLE('',(#513846)); +#513846 = SURFACE_STYLE_FILL_AREA(#513847); +#513847 = FILL_AREA_STYLE('',(#513848)); +#513848 = FILL_AREA_STYLE_COLOUR('',#512538); +#513849 = CURVE_STYLE('',#513850,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513851 = OVER_RIDING_STYLED_ITEM('overriding color',(#513852),#69130, + #513806); +#513852 = PRESENTATION_STYLE_ASSIGNMENT((#513853,#513858)); +#513853 = SURFACE_STYLE_USAGE(.BOTH.,#513854); +#513854 = SURFACE_SIDE_STYLE('',(#513855)); +#513855 = SURFACE_STYLE_FILL_AREA(#513856); +#513856 = FILL_AREA_STYLE('',(#513857)); +#513857 = FILL_AREA_STYLE_COLOUR('',#512538); +#513858 = CURVE_STYLE('',#513859,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513860 = OVER_RIDING_STYLED_ITEM('overriding color',(#513861),#69137, + #513806); +#513861 = PRESENTATION_STYLE_ASSIGNMENT((#513862,#513867)); +#513862 = SURFACE_STYLE_USAGE(.BOTH.,#513863); +#513863 = SURFACE_SIDE_STYLE('',(#513864)); +#513864 = SURFACE_STYLE_FILL_AREA(#513865); +#513865 = FILL_AREA_STYLE('',(#513866)); +#513866 = FILL_AREA_STYLE_COLOUR('',#512538); +#513867 = CURVE_STYLE('',#513868,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513869 = OVER_RIDING_STYLED_ITEM('overriding color',(#513870),#69153, + #513806); +#513870 = PRESENTATION_STYLE_ASSIGNMENT((#513871,#513876)); +#513871 = SURFACE_STYLE_USAGE(.BOTH.,#513872); +#513872 = SURFACE_SIDE_STYLE('',(#513873)); +#513873 = SURFACE_STYLE_FILL_AREA(#513874); +#513874 = FILL_AREA_STYLE('',(#513875)); +#513875 = FILL_AREA_STYLE_COLOUR('',#512538); +#513876 = CURVE_STYLE('',#513877,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513878 = OVER_RIDING_STYLED_ITEM('overriding color',(#513879),#69161, + #513806); +#513879 = PRESENTATION_STYLE_ASSIGNMENT((#513880,#513885)); +#513880 = SURFACE_STYLE_USAGE(.BOTH.,#513881); +#513881 = SURFACE_SIDE_STYLE('',(#513882)); +#513882 = SURFACE_STYLE_FILL_AREA(#513883); +#513883 = FILL_AREA_STYLE('',(#513884)); +#513884 = FILL_AREA_STYLE_COLOUR('',#512538); +#513885 = CURVE_STYLE('',#513886,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513887 = OVER_RIDING_STYLED_ITEM('overriding color',(#513888),#69169, + #513806); +#513888 = PRESENTATION_STYLE_ASSIGNMENT((#513889,#513894)); +#513889 = SURFACE_STYLE_USAGE(.BOTH.,#513890); +#513890 = SURFACE_SIDE_STYLE('',(#513891)); +#513891 = SURFACE_STYLE_FILL_AREA(#513892); +#513892 = FILL_AREA_STYLE('',(#513893)); +#513893 = FILL_AREA_STYLE_COLOUR('',#512538); +#513894 = CURVE_STYLE('',#513895,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513896 = OVER_RIDING_STYLED_ITEM('overriding color',(#513897),#69185, + #513806); +#513897 = PRESENTATION_STYLE_ASSIGNMENT((#513898,#513903)); +#513898 = SURFACE_STYLE_USAGE(.BOTH.,#513899); +#513899 = SURFACE_SIDE_STYLE('',(#513900)); +#513900 = SURFACE_STYLE_FILL_AREA(#513901); +#513901 = FILL_AREA_STYLE('',(#513902)); +#513902 = FILL_AREA_STYLE_COLOUR('',#512538); +#513903 = CURVE_STYLE('',#513904,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513905 = OVER_RIDING_STYLED_ITEM('overriding color',(#513906),#69194, + #513806); +#513906 = PRESENTATION_STYLE_ASSIGNMENT((#513907,#513912)); +#513907 = SURFACE_STYLE_USAGE(.BOTH.,#513908); +#513908 = SURFACE_SIDE_STYLE('',(#513909)); +#513909 = SURFACE_STYLE_FILL_AREA(#513910); +#513910 = FILL_AREA_STYLE('',(#513911)); +#513911 = FILL_AREA_STYLE_COLOUR('',#512538); +#513912 = CURVE_STYLE('',#513913,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513914 = OVER_RIDING_STYLED_ITEM('overriding color',(#513915),#69210, + #513806); +#513915 = PRESENTATION_STYLE_ASSIGNMENT((#513916,#513921)); +#513916 = SURFACE_STYLE_USAGE(.BOTH.,#513917); +#513917 = SURFACE_SIDE_STYLE('',(#513918)); +#513918 = SURFACE_STYLE_FILL_AREA(#513919); +#513919 = FILL_AREA_STYLE('',(#513920)); +#513920 = FILL_AREA_STYLE_COLOUR('',#512538); +#513921 = CURVE_STYLE('',#513922,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513923 = OVER_RIDING_STYLED_ITEM('overriding color',(#513924),#69218, + #513806); +#513924 = PRESENTATION_STYLE_ASSIGNMENT((#513925,#513930)); +#513925 = SURFACE_STYLE_USAGE(.BOTH.,#513926); +#513926 = SURFACE_SIDE_STYLE('',(#513927)); +#513927 = SURFACE_STYLE_FILL_AREA(#513928); +#513928 = FILL_AREA_STYLE('',(#513929)); +#513929 = FILL_AREA_STYLE_COLOUR('',#512538); +#513930 = CURVE_STYLE('',#513931,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513932 = OVER_RIDING_STYLED_ITEM('overriding color',(#513933),#69226, + #513806); +#513933 = PRESENTATION_STYLE_ASSIGNMENT((#513934,#513939)); +#513934 = SURFACE_STYLE_USAGE(.BOTH.,#513935); +#513935 = SURFACE_SIDE_STYLE('',(#513936)); +#513936 = SURFACE_STYLE_FILL_AREA(#513937); +#513937 = FILL_AREA_STYLE('',(#513938)); +#513938 = FILL_AREA_STYLE_COLOUR('',#512538); +#513939 = CURVE_STYLE('',#513940,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513941 = OVER_RIDING_STYLED_ITEM('overriding color',(#513942),#69242, + #513806); +#513942 = PRESENTATION_STYLE_ASSIGNMENT((#513943,#513948)); +#513943 = SURFACE_STYLE_USAGE(.BOTH.,#513944); +#513944 = SURFACE_SIDE_STYLE('',(#513945)); +#513945 = SURFACE_STYLE_FILL_AREA(#513946); +#513946 = FILL_AREA_STYLE('',(#513947)); +#513947 = FILL_AREA_STYLE_COLOUR('',#512538); +#513948 = CURVE_STYLE('',#513949,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513950 = OVER_RIDING_STYLED_ITEM('overriding color',(#513951),#69249, + #513806); +#513951 = PRESENTATION_STYLE_ASSIGNMENT((#513952,#513957)); +#513952 = SURFACE_STYLE_USAGE(.BOTH.,#513953); +#513953 = SURFACE_SIDE_STYLE('',(#513954)); +#513954 = SURFACE_STYLE_FILL_AREA(#513955); +#513955 = FILL_AREA_STYLE('',(#513956)); +#513956 = FILL_AREA_STYLE_COLOUR('',#512538); +#513957 = CURVE_STYLE('',#513958,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513959 = OVER_RIDING_STYLED_ITEM('overriding color',(#513960),#69265, + #513806); +#513960 = PRESENTATION_STYLE_ASSIGNMENT((#513961,#513966)); +#513961 = SURFACE_STYLE_USAGE(.BOTH.,#513962); +#513962 = SURFACE_SIDE_STYLE('',(#513963)); +#513963 = SURFACE_STYLE_FILL_AREA(#513964); +#513964 = FILL_AREA_STYLE('',(#513965)); +#513965 = FILL_AREA_STYLE_COLOUR('',#512538); +#513966 = CURVE_STYLE('',#513967,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513968 = OVER_RIDING_STYLED_ITEM('overriding color',(#513969),#69273, + #513806); +#513969 = PRESENTATION_STYLE_ASSIGNMENT((#513970,#513975)); +#513970 = SURFACE_STYLE_USAGE(.BOTH.,#513971); +#513971 = SURFACE_SIDE_STYLE('',(#513972)); +#513972 = SURFACE_STYLE_FILL_AREA(#513973); +#513973 = FILL_AREA_STYLE('',(#513974)); +#513974 = FILL_AREA_STYLE_COLOUR('',#512538); +#513975 = CURVE_STYLE('',#513976,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513977 = OVER_RIDING_STYLED_ITEM('overriding color',(#513978),#69281, + #513806); +#513978 = PRESENTATION_STYLE_ASSIGNMENT((#513979,#513984)); +#513979 = SURFACE_STYLE_USAGE(.BOTH.,#513980); +#513980 = SURFACE_SIDE_STYLE('',(#513981)); +#513981 = SURFACE_STYLE_FILL_AREA(#513982); +#513982 = FILL_AREA_STYLE('',(#513983)); +#513983 = FILL_AREA_STYLE_COLOUR('',#512538); +#513984 = CURVE_STYLE('',#513985,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513986 = OVER_RIDING_STYLED_ITEM('overriding color',(#513987),#69297, + #513806); +#513987 = PRESENTATION_STYLE_ASSIGNMENT((#513988,#513993)); +#513988 = SURFACE_STYLE_USAGE(.BOTH.,#513989); +#513989 = SURFACE_SIDE_STYLE('',(#513990)); +#513990 = SURFACE_STYLE_FILL_AREA(#513991); +#513991 = FILL_AREA_STYLE('',(#513992)); +#513992 = FILL_AREA_STYLE_COLOUR('',#512538); +#513993 = CURVE_STYLE('',#513994,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#513994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#513995 = STYLED_ITEM('color',(#513996),#69307); +#513996 = PRESENTATION_STYLE_ASSIGNMENT((#513997,#514002)); +#513997 = SURFACE_STYLE_USAGE(.BOTH.,#513998); +#513998 = SURFACE_SIDE_STYLE('',(#513999)); +#513999 = SURFACE_STYLE_FILL_AREA(#514000); +#514000 = FILL_AREA_STYLE('',(#514001)); +#514001 = FILL_AREA_STYLE_COLOUR('',#512538); +#514002 = CURVE_STYLE('',#514003,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514004 = STYLED_ITEM('color',(#514005),#69367); +#514005 = PRESENTATION_STYLE_ASSIGNMENT((#514006,#514011)); +#514006 = SURFACE_STYLE_USAGE(.BOTH.,#514007); +#514007 = SURFACE_SIDE_STYLE('',(#514008)); +#514008 = SURFACE_STYLE_FILL_AREA(#514009); +#514009 = FILL_AREA_STYLE('',(#514010)); +#514010 = FILL_AREA_STYLE_COLOUR('',#512538); +#514011 = CURVE_STYLE('',#514012,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514013 = STYLED_ITEM('color',(#514014),#69391); +#514014 = PRESENTATION_STYLE_ASSIGNMENT((#514015,#514020)); +#514015 = SURFACE_STYLE_USAGE(.BOTH.,#514016); +#514016 = SURFACE_SIDE_STYLE('',(#514017)); +#514017 = SURFACE_STYLE_FILL_AREA(#514018); +#514018 = FILL_AREA_STYLE('',(#514019)); +#514019 = FILL_AREA_STYLE_COLOUR('',#512538); +#514020 = CURVE_STYLE('',#514021,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514022 = STYLED_ITEM('color',(#514023),#69444); +#514023 = PRESENTATION_STYLE_ASSIGNMENT((#514024,#514029)); +#514024 = SURFACE_STYLE_USAGE(.BOTH.,#514025); +#514025 = SURFACE_SIDE_STYLE('',(#514026)); +#514026 = SURFACE_STYLE_FILL_AREA(#514027); +#514027 = FILL_AREA_STYLE('',(#514028)); +#514028 = FILL_AREA_STYLE_COLOUR('',#512538); +#514029 = CURVE_STYLE('',#514030,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514031 = STYLED_ITEM('color',(#514032),#69504); +#514032 = PRESENTATION_STYLE_ASSIGNMENT((#514033,#514038)); +#514033 = SURFACE_STYLE_USAGE(.BOTH.,#514034); +#514034 = SURFACE_SIDE_STYLE('',(#514035)); +#514035 = SURFACE_STYLE_FILL_AREA(#514036); +#514036 = FILL_AREA_STYLE('',(#514037)); +#514037 = FILL_AREA_STYLE_COLOUR('',#512538); +#514038 = CURVE_STYLE('',#514039,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514040 = STYLED_ITEM('color',(#514041),#69528); +#514041 = PRESENTATION_STYLE_ASSIGNMENT((#514042,#514047)); +#514042 = SURFACE_STYLE_USAGE(.BOTH.,#514043); +#514043 = SURFACE_SIDE_STYLE('',(#514044)); +#514044 = SURFACE_STYLE_FILL_AREA(#514045); +#514045 = FILL_AREA_STYLE('',(#514046)); +#514046 = FILL_AREA_STYLE_COLOUR('',#512538); +#514047 = CURVE_STYLE('',#514048,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514049 = STYLED_ITEM('color',(#514050),#69581); +#514050 = PRESENTATION_STYLE_ASSIGNMENT((#514051,#514056)); +#514051 = SURFACE_STYLE_USAGE(.BOTH.,#514052); +#514052 = SURFACE_SIDE_STYLE('',(#514053)); +#514053 = SURFACE_STYLE_FILL_AREA(#514054); +#514054 = FILL_AREA_STYLE('',(#514055)); +#514055 = FILL_AREA_STYLE_COLOUR('',#512538); +#514056 = CURVE_STYLE('',#514057,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514058 = STYLED_ITEM('color',(#514059),#69641); +#514059 = PRESENTATION_STYLE_ASSIGNMENT((#514060,#514065)); +#514060 = SURFACE_STYLE_USAGE(.BOTH.,#514061); +#514061 = SURFACE_SIDE_STYLE('',(#514062)); +#514062 = SURFACE_STYLE_FILL_AREA(#514063); +#514063 = FILL_AREA_STYLE('',(#514064)); +#514064 = FILL_AREA_STYLE_COLOUR('',#512538); +#514065 = CURVE_STYLE('',#514066,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514067 = STYLED_ITEM('color',(#514068),#69665); +#514068 = PRESENTATION_STYLE_ASSIGNMENT((#514069,#514074)); +#514069 = SURFACE_STYLE_USAGE(.BOTH.,#514070); +#514070 = SURFACE_SIDE_STYLE('',(#514071)); +#514071 = SURFACE_STYLE_FILL_AREA(#514072); +#514072 = FILL_AREA_STYLE('',(#514073)); +#514073 = FILL_AREA_STYLE_COLOUR('',#512538); +#514074 = CURVE_STYLE('',#514075,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514076 = STYLED_ITEM('color',(#514077),#69718); +#514077 = PRESENTATION_STYLE_ASSIGNMENT((#514078,#514083)); +#514078 = SURFACE_STYLE_USAGE(.BOTH.,#514079); +#514079 = SURFACE_SIDE_STYLE('',(#514080)); +#514080 = SURFACE_STYLE_FILL_AREA(#514081); +#514081 = FILL_AREA_STYLE('',(#514082)); +#514082 = FILL_AREA_STYLE_COLOUR('',#512538); +#514083 = CURVE_STYLE('',#514084,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514085 = STYLED_ITEM('color',(#514086),#69778); +#514086 = PRESENTATION_STYLE_ASSIGNMENT((#514087,#514092)); +#514087 = SURFACE_STYLE_USAGE(.BOTH.,#514088); +#514088 = SURFACE_SIDE_STYLE('',(#514089)); +#514089 = SURFACE_STYLE_FILL_AREA(#514090); +#514090 = FILL_AREA_STYLE('',(#514091)); +#514091 = FILL_AREA_STYLE_COLOUR('',#512538); +#514092 = CURVE_STYLE('',#514093,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514094 = STYLED_ITEM('color',(#514095),#69802); +#514095 = PRESENTATION_STYLE_ASSIGNMENT((#514096,#514101)); +#514096 = SURFACE_STYLE_USAGE(.BOTH.,#514097); +#514097 = SURFACE_SIDE_STYLE('',(#514098)); +#514098 = SURFACE_STYLE_FILL_AREA(#514099); +#514099 = FILL_AREA_STYLE('',(#514100)); +#514100 = FILL_AREA_STYLE_COLOUR('',#512538); +#514101 = CURVE_STYLE('',#514102,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514103 = STYLED_ITEM('color',(#514104),#69855); +#514104 = PRESENTATION_STYLE_ASSIGNMENT((#514105,#514110)); +#514105 = SURFACE_STYLE_USAGE(.BOTH.,#514106); +#514106 = SURFACE_SIDE_STYLE('',(#514107)); +#514107 = SURFACE_STYLE_FILL_AREA(#514108); +#514108 = FILL_AREA_STYLE('',(#514109)); +#514109 = FILL_AREA_STYLE_COLOUR('',#512538); +#514110 = CURVE_STYLE('',#514111,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514112 = STYLED_ITEM('color',(#514113),#69872); +#514113 = PRESENTATION_STYLE_ASSIGNMENT((#514114,#514119)); +#514114 = SURFACE_STYLE_USAGE(.BOTH.,#514115); +#514115 = SURFACE_SIDE_STYLE('',(#514116)); +#514116 = SURFACE_STYLE_FILL_AREA(#514117); +#514117 = FILL_AREA_STYLE('',(#514118)); +#514118 = FILL_AREA_STYLE_COLOUR('',#512538); +#514119 = CURVE_STYLE('',#514120,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514121 = STYLED_ITEM('color',(#514122),#69889); +#514122 = PRESENTATION_STYLE_ASSIGNMENT((#514123,#514128)); +#514123 = SURFACE_STYLE_USAGE(.BOTH.,#514124); +#514124 = SURFACE_SIDE_STYLE('',(#514125)); +#514125 = SURFACE_STYLE_FILL_AREA(#514126); +#514126 = FILL_AREA_STYLE('',(#514127)); +#514127 = FILL_AREA_STYLE_COLOUR('',#512538); +#514128 = CURVE_STYLE('',#514129,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514130 = STYLED_ITEM('color',(#514131),#69906); +#514131 = PRESENTATION_STYLE_ASSIGNMENT((#514132,#514137)); +#514132 = SURFACE_STYLE_USAGE(.BOTH.,#514133); +#514133 = SURFACE_SIDE_STYLE('',(#514134)); +#514134 = SURFACE_STYLE_FILL_AREA(#514135); +#514135 = FILL_AREA_STYLE('',(#514136)); +#514136 = FILL_AREA_STYLE_COLOUR('',#512538); +#514137 = CURVE_STYLE('',#514138,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514139 = STYLED_ITEM('color',(#514140),#69923); +#514140 = PRESENTATION_STYLE_ASSIGNMENT((#514141,#514146)); +#514141 = SURFACE_STYLE_USAGE(.BOTH.,#514142); +#514142 = SURFACE_SIDE_STYLE('',(#514143)); +#514143 = SURFACE_STYLE_FILL_AREA(#514144); +#514144 = FILL_AREA_STYLE('',(#514145)); +#514145 = FILL_AREA_STYLE_COLOUR('',#512538); +#514146 = CURVE_STYLE('',#514147,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514148 = STYLED_ITEM('color',(#514149),#69945); +#514149 = PRESENTATION_STYLE_ASSIGNMENT((#514150,#514155)); +#514150 = SURFACE_STYLE_USAGE(.BOTH.,#514151); +#514151 = SURFACE_SIDE_STYLE('',(#514152)); +#514152 = SURFACE_STYLE_FILL_AREA(#514153); +#514153 = FILL_AREA_STYLE('',(#514154)); +#514154 = FILL_AREA_STYLE_COLOUR('',#512538); +#514155 = CURVE_STYLE('',#514156,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514157 = STYLED_ITEM('color',(#514158),#69957); +#514158 = PRESENTATION_STYLE_ASSIGNMENT((#514159,#514164)); +#514159 = SURFACE_STYLE_USAGE(.BOTH.,#514160); +#514160 = SURFACE_SIDE_STYLE('',(#514161)); +#514161 = SURFACE_STYLE_FILL_AREA(#514162); +#514162 = FILL_AREA_STYLE('',(#514163)); +#514163 = FILL_AREA_STYLE_COLOUR('',#512538); +#514164 = CURVE_STYLE('',#514165,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514166 = STYLED_ITEM('color',(#514167),#69974); +#514167 = PRESENTATION_STYLE_ASSIGNMENT((#514168,#514173)); +#514168 = SURFACE_STYLE_USAGE(.BOTH.,#514169); +#514169 = SURFACE_SIDE_STYLE('',(#514170)); +#514170 = SURFACE_STYLE_FILL_AREA(#514171); +#514171 = FILL_AREA_STYLE('',(#514172)); +#514172 = FILL_AREA_STYLE_COLOUR('',#512538); +#514173 = CURVE_STYLE('',#514174,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514175 = STYLED_ITEM('color',(#514176),#69986); +#514176 = PRESENTATION_STYLE_ASSIGNMENT((#514177,#514182)); +#514177 = SURFACE_STYLE_USAGE(.BOTH.,#514178); +#514178 = SURFACE_SIDE_STYLE('',(#514179)); +#514179 = SURFACE_STYLE_FILL_AREA(#514180); +#514180 = FILL_AREA_STYLE('',(#514181)); +#514181 = FILL_AREA_STYLE_COLOUR('',#512538); +#514182 = CURVE_STYLE('',#514183,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514184 = STYLED_ITEM('color',(#514185),#70008); +#514185 = PRESENTATION_STYLE_ASSIGNMENT((#514186,#514191)); +#514186 = SURFACE_STYLE_USAGE(.BOTH.,#514187); +#514187 = SURFACE_SIDE_STYLE('',(#514188)); +#514188 = SURFACE_STYLE_FILL_AREA(#514189); +#514189 = FILL_AREA_STYLE('',(#514190)); +#514190 = FILL_AREA_STYLE_COLOUR('',#512538); +#514191 = CURVE_STYLE('',#514192,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514193 = STYLED_ITEM('color',(#514194),#70020); +#514194 = PRESENTATION_STYLE_ASSIGNMENT((#514195,#514200)); +#514195 = SURFACE_STYLE_USAGE(.BOTH.,#514196); +#514196 = SURFACE_SIDE_STYLE('',(#514197)); +#514197 = SURFACE_STYLE_FILL_AREA(#514198); +#514198 = FILL_AREA_STYLE('',(#514199)); +#514199 = FILL_AREA_STYLE_COLOUR('',#512538); +#514200 = CURVE_STYLE('',#514201,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514202 = STYLED_ITEM('color',(#514203),#70037); +#514203 = PRESENTATION_STYLE_ASSIGNMENT((#514204,#514209)); +#514204 = SURFACE_STYLE_USAGE(.BOTH.,#514205); +#514205 = SURFACE_SIDE_STYLE('',(#514206)); +#514206 = SURFACE_STYLE_FILL_AREA(#514207); +#514207 = FILL_AREA_STYLE('',(#514208)); +#514208 = FILL_AREA_STYLE_COLOUR('',#512538); +#514209 = CURVE_STYLE('',#514210,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514211 = STYLED_ITEM('color',(#514212),#70049); +#514212 = PRESENTATION_STYLE_ASSIGNMENT((#514213,#514218)); +#514213 = SURFACE_STYLE_USAGE(.BOTH.,#514214); +#514214 = SURFACE_SIDE_STYLE('',(#514215)); +#514215 = SURFACE_STYLE_FILL_AREA(#514216); +#514216 = FILL_AREA_STYLE('',(#514217)); +#514217 = FILL_AREA_STYLE_COLOUR('',#512538); +#514218 = CURVE_STYLE('',#514219,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514220 = STYLED_ITEM('color',(#514221),#70071); +#514221 = PRESENTATION_STYLE_ASSIGNMENT((#514222,#514227)); +#514222 = SURFACE_STYLE_USAGE(.BOTH.,#514223); +#514223 = SURFACE_SIDE_STYLE('',(#514224)); +#514224 = SURFACE_STYLE_FILL_AREA(#514225); +#514225 = FILL_AREA_STYLE('',(#514226)); +#514226 = FILL_AREA_STYLE_COLOUR('',#512538); +#514227 = CURVE_STYLE('',#514228,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514229 = STYLED_ITEM('color',(#514230),#70083); +#514230 = PRESENTATION_STYLE_ASSIGNMENT((#514231,#514236)); +#514231 = SURFACE_STYLE_USAGE(.BOTH.,#514232); +#514232 = SURFACE_SIDE_STYLE('',(#514233)); +#514233 = SURFACE_STYLE_FILL_AREA(#514234); +#514234 = FILL_AREA_STYLE('',(#514235)); +#514235 = FILL_AREA_STYLE_COLOUR('',#512538); +#514236 = CURVE_STYLE('',#514237,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514238 = STYLED_ITEM('color',(#514239),#70100); +#514239 = PRESENTATION_STYLE_ASSIGNMENT((#514240,#514245)); +#514240 = SURFACE_STYLE_USAGE(.BOTH.,#514241); +#514241 = SURFACE_SIDE_STYLE('',(#514242)); +#514242 = SURFACE_STYLE_FILL_AREA(#514243); +#514243 = FILL_AREA_STYLE('',(#514244)); +#514244 = FILL_AREA_STYLE_COLOUR('',#512538); +#514245 = CURVE_STYLE('',#514246,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514247 = STYLED_ITEM('color',(#514248),#70112); +#514248 = PRESENTATION_STYLE_ASSIGNMENT((#514249,#514254)); +#514249 = SURFACE_STYLE_USAGE(.BOTH.,#514250); +#514250 = SURFACE_SIDE_STYLE('',(#514251)); +#514251 = SURFACE_STYLE_FILL_AREA(#514252); +#514252 = FILL_AREA_STYLE('',(#514253)); +#514253 = FILL_AREA_STYLE_COLOUR('',#512538); +#514254 = CURVE_STYLE('',#514255,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514256 = STYLED_ITEM('color',(#514257),#70134); +#514257 = PRESENTATION_STYLE_ASSIGNMENT((#514258,#514263)); +#514258 = SURFACE_STYLE_USAGE(.BOTH.,#514259); +#514259 = SURFACE_SIDE_STYLE('',(#514260)); +#514260 = SURFACE_STYLE_FILL_AREA(#514261); +#514261 = FILL_AREA_STYLE('',(#514262)); +#514262 = FILL_AREA_STYLE_COLOUR('',#512538); +#514263 = CURVE_STYLE('',#514264,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514265 = STYLED_ITEM('color',(#514266),#70146); +#514266 = PRESENTATION_STYLE_ASSIGNMENT((#514267,#514272)); +#514267 = SURFACE_STYLE_USAGE(.BOTH.,#514268); +#514268 = SURFACE_SIDE_STYLE('',(#514269)); +#514269 = SURFACE_STYLE_FILL_AREA(#514270); +#514270 = FILL_AREA_STYLE('',(#514271)); +#514271 = FILL_AREA_STYLE_COLOUR('',#512538); +#514272 = CURVE_STYLE('',#514273,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514274 = STYLED_ITEM('color',(#514275),#70163); +#514275 = PRESENTATION_STYLE_ASSIGNMENT((#514276,#514281)); +#514276 = SURFACE_STYLE_USAGE(.BOTH.,#514277); +#514277 = SURFACE_SIDE_STYLE('',(#514278)); +#514278 = SURFACE_STYLE_FILL_AREA(#514279); +#514279 = FILL_AREA_STYLE('',(#514280)); +#514280 = FILL_AREA_STYLE_COLOUR('',#512538); +#514281 = CURVE_STYLE('',#514282,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514283 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #514284,#514293,#514302,#514311,#514320,#514329,#514338,#514347, + #514356,#514365,#514374,#514383,#514392,#514401,#514410,#514419, + #514428,#514437,#514446,#514455,#514464,#514473,#514482,#514491, + #514500,#514509,#514518,#514527,#514536,#514545,#514554,#514563, + #514572,#514581,#514590,#514599,#514608,#514617,#514626,#514635, + #514644,#514653,#514662,#514671,#514680,#514689,#514698,#514707, + #514716,#514725,#514734,#514743,#514752,#514761,#514770,#514779, + #514788,#514797,#514806,#514815,#514824,#514833,#514842,#514851, + #514860,#514869,#514878,#514887,#514896,#514905,#514914,#514923, + #514932,#514941,#514950,#514959,#514968,#514977,#514986,#514995, + #515004,#515013,#515022,#515031,#515040,#515049,#515058,#515067, + #515076,#515085,#515094),#73021); +#514284 = STYLED_ITEM('color',(#514285),#70219); +#514285 = PRESENTATION_STYLE_ASSIGNMENT((#514286,#514291)); +#514286 = SURFACE_STYLE_USAGE(.BOTH.,#514287); +#514287 = SURFACE_SIDE_STYLE('',(#514288)); +#514288 = SURFACE_STYLE_FILL_AREA(#514289); +#514289 = FILL_AREA_STYLE('',(#514290)); +#514290 = FILL_AREA_STYLE_COLOUR('',#513578); +#514291 = CURVE_STYLE('',#514292,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514292 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514293 = STYLED_ITEM('color',(#514294),#70323); +#514294 = PRESENTATION_STYLE_ASSIGNMENT((#514295,#514300)); +#514295 = SURFACE_STYLE_USAGE(.BOTH.,#514296); +#514296 = SURFACE_SIDE_STYLE('',(#514297)); +#514297 = SURFACE_STYLE_FILL_AREA(#514298); +#514298 = FILL_AREA_STYLE('',(#514299)); +#514299 = FILL_AREA_STYLE_COLOUR('',#513578); +#514300 = CURVE_STYLE('',#514301,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514301 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514302 = STYLED_ITEM('color',(#514303),#70530); +#514303 = PRESENTATION_STYLE_ASSIGNMENT((#514304,#514309)); +#514304 = SURFACE_STYLE_USAGE(.BOTH.,#514305); +#514305 = SURFACE_SIDE_STYLE('',(#514306)); +#514306 = SURFACE_STYLE_FILL_AREA(#514307); +#514307 = FILL_AREA_STYLE('',(#514308)); +#514308 = FILL_AREA_STYLE_COLOUR('',#513578); +#514309 = CURVE_STYLE('',#514310,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514310 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514311 = STYLED_ITEM('color',(#514312),#70554); +#514312 = PRESENTATION_STYLE_ASSIGNMENT((#514313,#514318)); +#514313 = SURFACE_STYLE_USAGE(.BOTH.,#514314); +#514314 = SURFACE_SIDE_STYLE('',(#514315)); +#514315 = SURFACE_STYLE_FILL_AREA(#514316); +#514316 = FILL_AREA_STYLE('',(#514317)); +#514317 = FILL_AREA_STYLE_COLOUR('',#513578); +#514318 = CURVE_STYLE('',#514319,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514320 = STYLED_ITEM('color',(#514321),#70578); +#514321 = PRESENTATION_STYLE_ASSIGNMENT((#514322,#514327)); +#514322 = SURFACE_STYLE_USAGE(.BOTH.,#514323); +#514323 = SURFACE_SIDE_STYLE('',(#514324)); +#514324 = SURFACE_STYLE_FILL_AREA(#514325); +#514325 = FILL_AREA_STYLE('',(#514326)); +#514326 = FILL_AREA_STYLE_COLOUR('',#513578); +#514327 = CURVE_STYLE('',#514328,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514329 = STYLED_ITEM('color',(#514330),#70602); +#514330 = PRESENTATION_STYLE_ASSIGNMENT((#514331,#514336)); +#514331 = SURFACE_STYLE_USAGE(.BOTH.,#514332); +#514332 = SURFACE_SIDE_STYLE('',(#514333)); +#514333 = SURFACE_STYLE_FILL_AREA(#514334); +#514334 = FILL_AREA_STYLE('',(#514335)); +#514335 = FILL_AREA_STYLE_COLOUR('',#513578); +#514336 = CURVE_STYLE('',#514337,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514338 = STYLED_ITEM('color',(#514339),#70626); +#514339 = PRESENTATION_STYLE_ASSIGNMENT((#514340,#514345)); +#514340 = SURFACE_STYLE_USAGE(.BOTH.,#514341); +#514341 = SURFACE_SIDE_STYLE('',(#514342)); +#514342 = SURFACE_STYLE_FILL_AREA(#514343); +#514343 = FILL_AREA_STYLE('',(#514344)); +#514344 = FILL_AREA_STYLE_COLOUR('',#513578); +#514345 = CURVE_STYLE('',#514346,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514347 = STYLED_ITEM('color',(#514348),#70787); +#514348 = PRESENTATION_STYLE_ASSIGNMENT((#514349,#514354)); +#514349 = SURFACE_STYLE_USAGE(.BOTH.,#514350); +#514350 = SURFACE_SIDE_STYLE('',(#514351)); +#514351 = SURFACE_STYLE_FILL_AREA(#514352); +#514352 = FILL_AREA_STYLE('',(#514353)); +#514353 = FILL_AREA_STYLE_COLOUR('',#513578); +#514354 = CURVE_STYLE('',#514355,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514356 = STYLED_ITEM('color',(#514357),#70843); +#514357 = PRESENTATION_STYLE_ASSIGNMENT((#514358,#514363)); +#514358 = SURFACE_STYLE_USAGE(.BOTH.,#514359); +#514359 = SURFACE_SIDE_STYLE('',(#514360)); +#514360 = SURFACE_STYLE_FILL_AREA(#514361); +#514361 = FILL_AREA_STYLE('',(#514362)); +#514362 = FILL_AREA_STYLE_COLOUR('',#513578); +#514363 = CURVE_STYLE('',#514364,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514365 = STYLED_ITEM('color',(#514366),#70867); +#514366 = PRESENTATION_STYLE_ASSIGNMENT((#514367,#514372)); +#514367 = SURFACE_STYLE_USAGE(.BOTH.,#514368); +#514368 = SURFACE_SIDE_STYLE('',(#514369)); +#514369 = SURFACE_STYLE_FILL_AREA(#514370); +#514370 = FILL_AREA_STYLE('',(#514371)); +#514371 = FILL_AREA_STYLE_COLOUR('',#513578); +#514372 = CURVE_STYLE('',#514373,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514374 = STYLED_ITEM('color',(#514375),#70891); +#514375 = PRESENTATION_STYLE_ASSIGNMENT((#514376,#514381)); +#514376 = SURFACE_STYLE_USAGE(.BOTH.,#514377); +#514377 = SURFACE_SIDE_STYLE('',(#514378)); +#514378 = SURFACE_STYLE_FILL_AREA(#514379); +#514379 = FILL_AREA_STYLE('',(#514380)); +#514380 = FILL_AREA_STYLE_COLOUR('',#513578); +#514381 = CURVE_STYLE('',#514382,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514383 = STYLED_ITEM('color',(#514384),#70915); +#514384 = PRESENTATION_STYLE_ASSIGNMENT((#514385,#514390)); +#514385 = SURFACE_STYLE_USAGE(.BOTH.,#514386); +#514386 = SURFACE_SIDE_STYLE('',(#514387)); +#514387 = SURFACE_STYLE_FILL_AREA(#514388); +#514388 = FILL_AREA_STYLE('',(#514389)); +#514389 = FILL_AREA_STYLE_COLOUR('',#513578); +#514390 = CURVE_STYLE('',#514391,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514392 = STYLED_ITEM('color',(#514393),#70939); +#514393 = PRESENTATION_STYLE_ASSIGNMENT((#514394,#514399)); +#514394 = SURFACE_STYLE_USAGE(.BOTH.,#514395); +#514395 = SURFACE_SIDE_STYLE('',(#514396)); +#514396 = SURFACE_STYLE_FILL_AREA(#514397); +#514397 = FILL_AREA_STYLE('',(#514398)); +#514398 = FILL_AREA_STYLE_COLOUR('',#513578); +#514399 = CURVE_STYLE('',#514400,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514401 = STYLED_ITEM('color',(#514402),#71071); +#514402 = PRESENTATION_STYLE_ASSIGNMENT((#514403,#514408)); +#514403 = SURFACE_STYLE_USAGE(.BOTH.,#514404); +#514404 = SURFACE_SIDE_STYLE('',(#514405)); +#514405 = SURFACE_STYLE_FILL_AREA(#514406); +#514406 = FILL_AREA_STYLE('',(#514407)); +#514407 = FILL_AREA_STYLE_COLOUR('',#513578); +#514408 = CURVE_STYLE('',#514409,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514410 = STYLED_ITEM('color',(#514411),#71143); +#514411 = PRESENTATION_STYLE_ASSIGNMENT((#514412,#514417)); +#514412 = SURFACE_STYLE_USAGE(.BOTH.,#514413); +#514413 = SURFACE_SIDE_STYLE('',(#514414)); +#514414 = SURFACE_STYLE_FILL_AREA(#514415); +#514415 = FILL_AREA_STYLE('',(#514416)); +#514416 = FILL_AREA_STYLE_COLOUR('',#513578); +#514417 = CURVE_STYLE('',#514418,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514419 = STYLED_ITEM('color',(#514420),#71167); +#514420 = PRESENTATION_STYLE_ASSIGNMENT((#514421,#514426)); +#514421 = SURFACE_STYLE_USAGE(.BOTH.,#514422); +#514422 = SURFACE_SIDE_STYLE('',(#514423)); +#514423 = SURFACE_STYLE_FILL_AREA(#514424); +#514424 = FILL_AREA_STYLE('',(#514425)); +#514425 = FILL_AREA_STYLE_COLOUR('',#512538); +#514426 = CURVE_STYLE('',#514427,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514428 = STYLED_ITEM('color',(#514429),#71198); +#514429 = PRESENTATION_STYLE_ASSIGNMENT((#514430,#514435)); +#514430 = SURFACE_STYLE_USAGE(.BOTH.,#514431); +#514431 = SURFACE_SIDE_STYLE('',(#514432)); +#514432 = SURFACE_STYLE_FILL_AREA(#514433); +#514433 = FILL_AREA_STYLE('',(#514434)); +#514434 = FILL_AREA_STYLE_COLOUR('',#512538); +#514435 = CURVE_STYLE('',#514436,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514437 = STYLED_ITEM('color',(#514438),#71222); +#514438 = PRESENTATION_STYLE_ASSIGNMENT((#514439,#514444)); +#514439 = SURFACE_STYLE_USAGE(.BOTH.,#514440); +#514440 = SURFACE_SIDE_STYLE('',(#514441)); +#514441 = SURFACE_STYLE_FILL_AREA(#514442); +#514442 = FILL_AREA_STYLE('',(#514443)); +#514443 = FILL_AREA_STYLE_COLOUR('',#512538); +#514444 = CURVE_STYLE('',#514445,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514446 = STYLED_ITEM('color',(#514447),#71253); +#514447 = PRESENTATION_STYLE_ASSIGNMENT((#514448,#514453)); +#514448 = SURFACE_STYLE_USAGE(.BOTH.,#514449); +#514449 = SURFACE_SIDE_STYLE('',(#514450)); +#514450 = SURFACE_STYLE_FILL_AREA(#514451); +#514451 = FILL_AREA_STYLE('',(#514452)); +#514452 = FILL_AREA_STYLE_COLOUR('',#512538); +#514453 = CURVE_STYLE('',#514454,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514455 = STYLED_ITEM('color',(#514456),#71277); +#514456 = PRESENTATION_STYLE_ASSIGNMENT((#514457,#514462)); +#514457 = SURFACE_STYLE_USAGE(.BOTH.,#514458); +#514458 = SURFACE_SIDE_STYLE('',(#514459)); +#514459 = SURFACE_STYLE_FILL_AREA(#514460); +#514460 = FILL_AREA_STYLE('',(#514461)); +#514461 = FILL_AREA_STYLE_COLOUR('',#512538); +#514462 = CURVE_STYLE('',#514463,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514463 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514464 = STYLED_ITEM('color',(#514465),#71317); +#514465 = PRESENTATION_STYLE_ASSIGNMENT((#514466,#514471)); +#514466 = SURFACE_STYLE_USAGE(.BOTH.,#514467); +#514467 = SURFACE_SIDE_STYLE('',(#514468)); +#514468 = SURFACE_STYLE_FILL_AREA(#514469); +#514469 = FILL_AREA_STYLE('',(#514470)); +#514470 = FILL_AREA_STYLE_COLOUR('',#512538); +#514471 = CURVE_STYLE('',#514472,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514472 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514473 = STYLED_ITEM('color',(#514474),#71341); +#514474 = PRESENTATION_STYLE_ASSIGNMENT((#514475,#514480)); +#514475 = SURFACE_STYLE_USAGE(.BOTH.,#514476); +#514476 = SURFACE_SIDE_STYLE('',(#514477)); +#514477 = SURFACE_STYLE_FILL_AREA(#514478); +#514478 = FILL_AREA_STYLE('',(#514479)); +#514479 = FILL_AREA_STYLE_COLOUR('',#512538); +#514480 = CURVE_STYLE('',#514481,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514481 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514482 = STYLED_ITEM('color',(#514483),#71374); +#514483 = PRESENTATION_STYLE_ASSIGNMENT((#514484,#514489)); +#514484 = SURFACE_STYLE_USAGE(.BOTH.,#514485); +#514485 = SURFACE_SIDE_STYLE('',(#514486)); +#514486 = SURFACE_STYLE_FILL_AREA(#514487); +#514487 = FILL_AREA_STYLE('',(#514488)); +#514488 = FILL_AREA_STYLE_COLOUR('',#512538); +#514489 = CURVE_STYLE('',#514490,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514490 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514491 = STYLED_ITEM('color',(#514492),#71414); +#514492 = PRESENTATION_STYLE_ASSIGNMENT((#514493,#514498)); +#514493 = SURFACE_STYLE_USAGE(.BOTH.,#514494); +#514494 = SURFACE_SIDE_STYLE('',(#514495)); +#514495 = SURFACE_STYLE_FILL_AREA(#514496); +#514496 = FILL_AREA_STYLE('',(#514497)); +#514497 = FILL_AREA_STYLE_COLOUR('',#512538); +#514498 = CURVE_STYLE('',#514499,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514499 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514500 = STYLED_ITEM('color',(#514501),#71438); +#514501 = PRESENTATION_STYLE_ASSIGNMENT((#514502,#514507)); +#514502 = SURFACE_STYLE_USAGE(.BOTH.,#514503); +#514503 = SURFACE_SIDE_STYLE('',(#514504)); +#514504 = SURFACE_STYLE_FILL_AREA(#514505); +#514505 = FILL_AREA_STYLE('',(#514506)); +#514506 = FILL_AREA_STYLE_COLOUR('',#512538); +#514507 = CURVE_STYLE('',#514508,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514508 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514509 = STYLED_ITEM('color',(#514510),#71471); +#514510 = PRESENTATION_STYLE_ASSIGNMENT((#514511,#514516)); +#514511 = SURFACE_STYLE_USAGE(.BOTH.,#514512); +#514512 = SURFACE_SIDE_STYLE('',(#514513)); +#514513 = SURFACE_STYLE_FILL_AREA(#514514); +#514514 = FILL_AREA_STYLE('',(#514515)); +#514515 = FILL_AREA_STYLE_COLOUR('',#512538); +#514516 = CURVE_STYLE('',#514517,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514517 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514518 = STYLED_ITEM('color',(#514519),#71511); +#514519 = PRESENTATION_STYLE_ASSIGNMENT((#514520,#514525)); +#514520 = SURFACE_STYLE_USAGE(.BOTH.,#514521); +#514521 = SURFACE_SIDE_STYLE('',(#514522)); +#514522 = SURFACE_STYLE_FILL_AREA(#514523); +#514523 = FILL_AREA_STYLE('',(#514524)); +#514524 = FILL_AREA_STYLE_COLOUR('',#512538); +#514525 = CURVE_STYLE('',#514526,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514526 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514527 = STYLED_ITEM('color',(#514528),#71535); +#514528 = PRESENTATION_STYLE_ASSIGNMENT((#514529,#514534)); +#514529 = SURFACE_STYLE_USAGE(.BOTH.,#514530); +#514530 = SURFACE_SIDE_STYLE('',(#514531)); +#514531 = SURFACE_STYLE_FILL_AREA(#514532); +#514532 = FILL_AREA_STYLE('',(#514533)); +#514533 = FILL_AREA_STYLE_COLOUR('',#512538); +#514534 = CURVE_STYLE('',#514535,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514536 = STYLED_ITEM('color',(#514537),#71568); +#514537 = PRESENTATION_STYLE_ASSIGNMENT((#514538,#514543)); +#514538 = SURFACE_STYLE_USAGE(.BOTH.,#514539); +#514539 = SURFACE_SIDE_STYLE('',(#514540)); +#514540 = SURFACE_STYLE_FILL_AREA(#514541); +#514541 = FILL_AREA_STYLE('',(#514542)); +#514542 = FILL_AREA_STYLE_COLOUR('',#512538); +#514543 = CURVE_STYLE('',#514544,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514545 = STYLED_ITEM('color',(#514546),#71608); +#514546 = PRESENTATION_STYLE_ASSIGNMENT((#514547,#514552)); +#514547 = SURFACE_STYLE_USAGE(.BOTH.,#514548); +#514548 = SURFACE_SIDE_STYLE('',(#514549)); +#514549 = SURFACE_STYLE_FILL_AREA(#514550); +#514550 = FILL_AREA_STYLE('',(#514551)); +#514551 = FILL_AREA_STYLE_COLOUR('',#512538); +#514552 = CURVE_STYLE('',#514553,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514554 = STYLED_ITEM('color',(#514555),#71632); +#514555 = PRESENTATION_STYLE_ASSIGNMENT((#514556,#514561)); +#514556 = SURFACE_STYLE_USAGE(.BOTH.,#514557); +#514557 = SURFACE_SIDE_STYLE('',(#514558)); +#514558 = SURFACE_STYLE_FILL_AREA(#514559); +#514559 = FILL_AREA_STYLE('',(#514560)); +#514560 = FILL_AREA_STYLE_COLOUR('',#512538); +#514561 = CURVE_STYLE('',#514562,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514563 = STYLED_ITEM('color',(#514564),#71665); +#514564 = PRESENTATION_STYLE_ASSIGNMENT((#514565,#514570)); +#514565 = SURFACE_STYLE_USAGE(.BOTH.,#514566); +#514566 = SURFACE_SIDE_STYLE('',(#514567)); +#514567 = SURFACE_STYLE_FILL_AREA(#514568); +#514568 = FILL_AREA_STYLE('',(#514569)); +#514569 = FILL_AREA_STYLE_COLOUR('',#512538); +#514570 = CURVE_STYLE('',#514571,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514572 = STYLED_ITEM('color',(#514573),#71692); +#514573 = PRESENTATION_STYLE_ASSIGNMENT((#514574,#514579)); +#514574 = SURFACE_STYLE_USAGE(.BOTH.,#514575); +#514575 = SURFACE_SIDE_STYLE('',(#514576)); +#514576 = SURFACE_STYLE_FILL_AREA(#514577); +#514577 = FILL_AREA_STYLE('',(#514578)); +#514578 = FILL_AREA_STYLE_COLOUR('',#512538); +#514579 = CURVE_STYLE('',#514580,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514581 = STYLED_ITEM('color',(#514582),#71710); +#514582 = PRESENTATION_STYLE_ASSIGNMENT((#514583,#514588)); +#514583 = SURFACE_STYLE_USAGE(.BOTH.,#514584); +#514584 = SURFACE_SIDE_STYLE('',(#514585)); +#514585 = SURFACE_STYLE_FILL_AREA(#514586); +#514586 = FILL_AREA_STYLE('',(#514587)); +#514587 = FILL_AREA_STYLE_COLOUR('',#512538); +#514588 = CURVE_STYLE('',#514589,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514590 = STYLED_ITEM('color',(#514591),#71735); +#514591 = PRESENTATION_STYLE_ASSIGNMENT((#514592,#514597)); +#514592 = SURFACE_STYLE_USAGE(.BOTH.,#514593); +#514593 = SURFACE_SIDE_STYLE('',(#514594)); +#514594 = SURFACE_STYLE_FILL_AREA(#514595); +#514595 = FILL_AREA_STYLE('',(#514596)); +#514596 = FILL_AREA_STYLE_COLOUR('',#513578); +#514597 = CURVE_STYLE('',#514598,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514599 = STYLED_ITEM('color',(#514600),#71759); +#514600 = PRESENTATION_STYLE_ASSIGNMENT((#514601,#514606)); +#514601 = SURFACE_STYLE_USAGE(.BOTH.,#514602); +#514602 = SURFACE_SIDE_STYLE('',(#514603)); +#514603 = SURFACE_STYLE_FILL_AREA(#514604); +#514604 = FILL_AREA_STYLE('',(#514605)); +#514605 = FILL_AREA_STYLE_COLOUR('',#513578); +#514606 = CURVE_STYLE('',#514607,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514608 = STYLED_ITEM('color',(#514609),#71813); +#514609 = PRESENTATION_STYLE_ASSIGNMENT((#514610,#514615)); +#514610 = SURFACE_STYLE_USAGE(.BOTH.,#514611); +#514611 = SURFACE_SIDE_STYLE('',(#514612)); +#514612 = SURFACE_STYLE_FILL_AREA(#514613); +#514613 = FILL_AREA_STYLE('',(#514614)); +#514614 = FILL_AREA_STYLE_COLOUR('',#513578); +#514615 = CURVE_STYLE('',#514616,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514617 = STYLED_ITEM('color',(#514618),#71837); +#514618 = PRESENTATION_STYLE_ASSIGNMENT((#514619,#514624)); +#514619 = SURFACE_STYLE_USAGE(.BOTH.,#514620); +#514620 = SURFACE_SIDE_STYLE('',(#514621)); +#514621 = SURFACE_STYLE_FILL_AREA(#514622); +#514622 = FILL_AREA_STYLE('',(#514623)); +#514623 = FILL_AREA_STYLE_COLOUR('',#513578); +#514624 = CURVE_STYLE('',#514625,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514626 = STYLED_ITEM('color',(#514627),#71861); +#514627 = PRESENTATION_STYLE_ASSIGNMENT((#514628,#514633)); +#514628 = SURFACE_STYLE_USAGE(.BOTH.,#514629); +#514629 = SURFACE_SIDE_STYLE('',(#514630)); +#514630 = SURFACE_STYLE_FILL_AREA(#514631); +#514631 = FILL_AREA_STYLE('',(#514632)); +#514632 = FILL_AREA_STYLE_COLOUR('',#513578); +#514633 = CURVE_STYLE('',#514634,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514635 = STYLED_ITEM('color',(#514636),#71878); +#514636 = PRESENTATION_STYLE_ASSIGNMENT((#514637,#514642)); +#514637 = SURFACE_STYLE_USAGE(.BOTH.,#514638); +#514638 = SURFACE_SIDE_STYLE('',(#514639)); +#514639 = SURFACE_STYLE_FILL_AREA(#514640); +#514640 = FILL_AREA_STYLE('',(#514641)); +#514641 = FILL_AREA_STYLE_COLOUR('',#513578); +#514642 = CURVE_STYLE('',#514643,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514644 = STYLED_ITEM('color',(#514645),#71902); +#514645 = PRESENTATION_STYLE_ASSIGNMENT((#514646,#514651)); +#514646 = SURFACE_STYLE_USAGE(.BOTH.,#514647); +#514647 = SURFACE_SIDE_STYLE('',(#514648)); +#514648 = SURFACE_STYLE_FILL_AREA(#514649); +#514649 = FILL_AREA_STYLE('',(#514650)); +#514650 = FILL_AREA_STYLE_COLOUR('',#513578); +#514651 = CURVE_STYLE('',#514652,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514653 = STYLED_ITEM('color',(#514654),#71949); +#514654 = PRESENTATION_STYLE_ASSIGNMENT((#514655,#514660)); +#514655 = SURFACE_STYLE_USAGE(.BOTH.,#514656); +#514656 = SURFACE_SIDE_STYLE('',(#514657)); +#514657 = SURFACE_STYLE_FILL_AREA(#514658); +#514658 = FILL_AREA_STYLE('',(#514659)); +#514659 = FILL_AREA_STYLE_COLOUR('',#513578); +#514660 = CURVE_STYLE('',#514661,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514662 = STYLED_ITEM('color',(#514663),#71973); +#514663 = PRESENTATION_STYLE_ASSIGNMENT((#514664,#514669)); +#514664 = SURFACE_STYLE_USAGE(.BOTH.,#514665); +#514665 = SURFACE_SIDE_STYLE('',(#514666)); +#514666 = SURFACE_STYLE_FILL_AREA(#514667); +#514667 = FILL_AREA_STYLE('',(#514668)); +#514668 = FILL_AREA_STYLE_COLOUR('',#513578); +#514669 = CURVE_STYLE('',#514670,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514671 = STYLED_ITEM('color',(#514672),#71997); +#514672 = PRESENTATION_STYLE_ASSIGNMENT((#514673,#514678)); +#514673 = SURFACE_STYLE_USAGE(.BOTH.,#514674); +#514674 = SURFACE_SIDE_STYLE('',(#514675)); +#514675 = SURFACE_STYLE_FILL_AREA(#514676); +#514676 = FILL_AREA_STYLE('',(#514677)); +#514677 = FILL_AREA_STYLE_COLOUR('',#513578); +#514678 = CURVE_STYLE('',#514679,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514680 = STYLED_ITEM('color',(#514681),#72014); +#514681 = PRESENTATION_STYLE_ASSIGNMENT((#514682,#514687)); +#514682 = SURFACE_STYLE_USAGE(.BOTH.,#514683); +#514683 = SURFACE_SIDE_STYLE('',(#514684)); +#514684 = SURFACE_STYLE_FILL_AREA(#514685); +#514685 = FILL_AREA_STYLE('',(#514686)); +#514686 = FILL_AREA_STYLE_COLOUR('',#513578); +#514687 = CURVE_STYLE('',#514688,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514689 = STYLED_ITEM('color',(#514690),#72031); +#514690 = PRESENTATION_STYLE_ASSIGNMENT((#514691,#514696)); +#514691 = SURFACE_STYLE_USAGE(.BOTH.,#514692); +#514692 = SURFACE_SIDE_STYLE('',(#514693)); +#514693 = SURFACE_STYLE_FILL_AREA(#514694); +#514694 = FILL_AREA_STYLE('',(#514695)); +#514695 = FILL_AREA_STYLE_COLOUR('',#513578); +#514696 = CURVE_STYLE('',#514697,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514698 = STYLED_ITEM('color',(#514699),#72071); +#514699 = PRESENTATION_STYLE_ASSIGNMENT((#514700,#514705)); +#514700 = SURFACE_STYLE_USAGE(.BOTH.,#514701); +#514701 = SURFACE_SIDE_STYLE('',(#514702)); +#514702 = SURFACE_STYLE_FILL_AREA(#514703); +#514703 = FILL_AREA_STYLE('',(#514704)); +#514704 = FILL_AREA_STYLE_COLOUR('',#513578); +#514705 = CURVE_STYLE('',#514706,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514707 = STYLED_ITEM('color',(#514708),#72088); +#514708 = PRESENTATION_STYLE_ASSIGNMENT((#514709,#514714)); +#514709 = SURFACE_STYLE_USAGE(.BOTH.,#514710); +#514710 = SURFACE_SIDE_STYLE('',(#514711)); +#514711 = SURFACE_STYLE_FILL_AREA(#514712); +#514712 = FILL_AREA_STYLE('',(#514713)); +#514713 = FILL_AREA_STYLE_COLOUR('',#513578); +#514714 = CURVE_STYLE('',#514715,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514716 = STYLED_ITEM('color',(#514717),#72102); +#514717 = PRESENTATION_STYLE_ASSIGNMENT((#514718,#514723)); +#514718 = SURFACE_STYLE_USAGE(.BOTH.,#514719); +#514719 = SURFACE_SIDE_STYLE('',(#514720)); +#514720 = SURFACE_STYLE_FILL_AREA(#514721); +#514721 = FILL_AREA_STYLE('',(#514722)); +#514722 = FILL_AREA_STYLE_COLOUR('',#513578); +#514723 = CURVE_STYLE('',#514724,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514725 = STYLED_ITEM('color',(#514726),#72119); +#514726 = PRESENTATION_STYLE_ASSIGNMENT((#514727,#514732)); +#514727 = SURFACE_STYLE_USAGE(.BOTH.,#514728); +#514728 = SURFACE_SIDE_STYLE('',(#514729)); +#514729 = SURFACE_STYLE_FILL_AREA(#514730); +#514730 = FILL_AREA_STYLE('',(#514731)); +#514731 = FILL_AREA_STYLE_COLOUR('',#512538); +#514732 = CURVE_STYLE('',#514733,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514734 = STYLED_ITEM('color',(#514735),#72136); +#514735 = PRESENTATION_STYLE_ASSIGNMENT((#514736,#514741)); +#514736 = SURFACE_STYLE_USAGE(.BOTH.,#514737); +#514737 = SURFACE_SIDE_STYLE('',(#514738)); +#514738 = SURFACE_STYLE_FILL_AREA(#514739); +#514739 = FILL_AREA_STYLE('',(#514740)); +#514740 = FILL_AREA_STYLE_COLOUR('',#512538); +#514741 = CURVE_STYLE('',#514742,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514743 = STYLED_ITEM('color',(#514744),#72153); +#514744 = PRESENTATION_STYLE_ASSIGNMENT((#514745,#514750)); +#514745 = SURFACE_STYLE_USAGE(.BOTH.,#514746); +#514746 = SURFACE_SIDE_STYLE('',(#514747)); +#514747 = SURFACE_STYLE_FILL_AREA(#514748); +#514748 = FILL_AREA_STYLE('',(#514749)); +#514749 = FILL_AREA_STYLE_COLOUR('',#512538); +#514750 = CURVE_STYLE('',#514751,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514752 = STYLED_ITEM('color',(#514753),#72170); +#514753 = PRESENTATION_STYLE_ASSIGNMENT((#514754,#514759)); +#514754 = SURFACE_STYLE_USAGE(.BOTH.,#514755); +#514755 = SURFACE_SIDE_STYLE('',(#514756)); +#514756 = SURFACE_STYLE_FILL_AREA(#514757); +#514757 = FILL_AREA_STYLE('',(#514758)); +#514758 = FILL_AREA_STYLE_COLOUR('',#512538); +#514759 = CURVE_STYLE('',#514760,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514761 = STYLED_ITEM('color',(#514762),#72187); +#514762 = PRESENTATION_STYLE_ASSIGNMENT((#514763,#514768)); +#514763 = SURFACE_STYLE_USAGE(.BOTH.,#514764); +#514764 = SURFACE_SIDE_STYLE('',(#514765)); +#514765 = SURFACE_STYLE_FILL_AREA(#514766); +#514766 = FILL_AREA_STYLE('',(#514767)); +#514767 = FILL_AREA_STYLE_COLOUR('',#513578); +#514768 = CURVE_STYLE('',#514769,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514770 = STYLED_ITEM('color',(#514771),#72211); +#514771 = PRESENTATION_STYLE_ASSIGNMENT((#514772,#514777)); +#514772 = SURFACE_STYLE_USAGE(.BOTH.,#514773); +#514773 = SURFACE_SIDE_STYLE('',(#514774)); +#514774 = SURFACE_STYLE_FILL_AREA(#514775); +#514775 = FILL_AREA_STYLE('',(#514776)); +#514776 = FILL_AREA_STYLE_COLOUR('',#513578); +#514777 = CURVE_STYLE('',#514778,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514779 = STYLED_ITEM('color',(#514780),#72228); +#514780 = PRESENTATION_STYLE_ASSIGNMENT((#514781,#514786)); +#514781 = SURFACE_STYLE_USAGE(.BOTH.,#514782); +#514782 = SURFACE_SIDE_STYLE('',(#514783)); +#514783 = SURFACE_STYLE_FILL_AREA(#514784); +#514784 = FILL_AREA_STYLE('',(#514785)); +#514785 = FILL_AREA_STYLE_COLOUR('',#513578); +#514786 = CURVE_STYLE('',#514787,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514788 = STYLED_ITEM('color',(#514789),#72245); +#514789 = PRESENTATION_STYLE_ASSIGNMENT((#514790,#514795)); +#514790 = SURFACE_STYLE_USAGE(.BOTH.,#514791); +#514791 = SURFACE_SIDE_STYLE('',(#514792)); +#514792 = SURFACE_STYLE_FILL_AREA(#514793); +#514793 = FILL_AREA_STYLE('',(#514794)); +#514794 = FILL_AREA_STYLE_COLOUR('',#513578); +#514795 = CURVE_STYLE('',#514796,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514797 = STYLED_ITEM('color',(#514798),#72257); +#514798 = PRESENTATION_STYLE_ASSIGNMENT((#514799,#514804)); +#514799 = SURFACE_STYLE_USAGE(.BOTH.,#514800); +#514800 = SURFACE_SIDE_STYLE('',(#514801)); +#514801 = SURFACE_STYLE_FILL_AREA(#514802); +#514802 = FILL_AREA_STYLE('',(#514803)); +#514803 = FILL_AREA_STYLE_COLOUR('',#512538); +#514804 = CURVE_STYLE('',#514805,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514806 = STYLED_ITEM('color',(#514807),#72277); +#514807 = PRESENTATION_STYLE_ASSIGNMENT((#514808,#514813)); +#514808 = SURFACE_STYLE_USAGE(.BOTH.,#514809); +#514809 = SURFACE_SIDE_STYLE('',(#514810)); +#514810 = SURFACE_STYLE_FILL_AREA(#514811); +#514811 = FILL_AREA_STYLE('',(#514812)); +#514812 = FILL_AREA_STYLE_COLOUR('',#512538); +#514813 = CURVE_STYLE('',#514814,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514815 = STYLED_ITEM('color',(#514816),#72289); +#514816 = PRESENTATION_STYLE_ASSIGNMENT((#514817,#514822)); +#514817 = SURFACE_STYLE_USAGE(.BOTH.,#514818); +#514818 = SURFACE_SIDE_STYLE('',(#514819)); +#514819 = SURFACE_STYLE_FILL_AREA(#514820); +#514820 = FILL_AREA_STYLE('',(#514821)); +#514821 = FILL_AREA_STYLE_COLOUR('',#512538); +#514822 = CURVE_STYLE('',#514823,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514824 = STYLED_ITEM('color',(#514825),#72301); +#514825 = PRESENTATION_STYLE_ASSIGNMENT((#514826,#514831)); +#514826 = SURFACE_STYLE_USAGE(.BOTH.,#514827); +#514827 = SURFACE_SIDE_STYLE('',(#514828)); +#514828 = SURFACE_STYLE_FILL_AREA(#514829); +#514829 = FILL_AREA_STYLE('',(#514830)); +#514830 = FILL_AREA_STYLE_COLOUR('',#512538); +#514831 = CURVE_STYLE('',#514832,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514833 = STYLED_ITEM('color',(#514834),#72318); +#514834 = PRESENTATION_STYLE_ASSIGNMENT((#514835,#514840)); +#514835 = SURFACE_STYLE_USAGE(.BOTH.,#514836); +#514836 = SURFACE_SIDE_STYLE('',(#514837)); +#514837 = SURFACE_STYLE_FILL_AREA(#514838); +#514838 = FILL_AREA_STYLE('',(#514839)); +#514839 = FILL_AREA_STYLE_COLOUR('',#512538); +#514840 = CURVE_STYLE('',#514841,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514842 = STYLED_ITEM('color',(#514843),#72330); +#514843 = PRESENTATION_STYLE_ASSIGNMENT((#514844,#514849)); +#514844 = SURFACE_STYLE_USAGE(.BOTH.,#514845); +#514845 = SURFACE_SIDE_STYLE('',(#514846)); +#514846 = SURFACE_STYLE_FILL_AREA(#514847); +#514847 = FILL_AREA_STYLE('',(#514848)); +#514848 = FILL_AREA_STYLE_COLOUR('',#512538); +#514849 = CURVE_STYLE('',#514850,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514851 = STYLED_ITEM('color',(#514852),#72347); +#514852 = PRESENTATION_STYLE_ASSIGNMENT((#514853,#514858)); +#514853 = SURFACE_STYLE_USAGE(.BOTH.,#514854); +#514854 = SURFACE_SIDE_STYLE('',(#514855)); +#514855 = SURFACE_STYLE_FILL_AREA(#514856); +#514856 = FILL_AREA_STYLE('',(#514857)); +#514857 = FILL_AREA_STYLE_COLOUR('',#512538); +#514858 = CURVE_STYLE('',#514859,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514860 = STYLED_ITEM('color',(#514861),#72359); +#514861 = PRESENTATION_STYLE_ASSIGNMENT((#514862,#514867)); +#514862 = SURFACE_STYLE_USAGE(.BOTH.,#514863); +#514863 = SURFACE_SIDE_STYLE('',(#514864)); +#514864 = SURFACE_STYLE_FILL_AREA(#514865); +#514865 = FILL_AREA_STYLE('',(#514866)); +#514866 = FILL_AREA_STYLE_COLOUR('',#512538); +#514867 = CURVE_STYLE('',#514868,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514869 = STYLED_ITEM('color',(#514870),#72376); +#514870 = PRESENTATION_STYLE_ASSIGNMENT((#514871,#514876)); +#514871 = SURFACE_STYLE_USAGE(.BOTH.,#514872); +#514872 = SURFACE_SIDE_STYLE('',(#514873)); +#514873 = SURFACE_STYLE_FILL_AREA(#514874); +#514874 = FILL_AREA_STYLE('',(#514875)); +#514875 = FILL_AREA_STYLE_COLOUR('',#512538); +#514876 = CURVE_STYLE('',#514877,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514878 = STYLED_ITEM('color',(#514879),#72388); +#514879 = PRESENTATION_STYLE_ASSIGNMENT((#514880,#514885)); +#514880 = SURFACE_STYLE_USAGE(.BOTH.,#514881); +#514881 = SURFACE_SIDE_STYLE('',(#514882)); +#514882 = SURFACE_STYLE_FILL_AREA(#514883); +#514883 = FILL_AREA_STYLE('',(#514884)); +#514884 = FILL_AREA_STYLE_COLOUR('',#512538); +#514885 = CURVE_STYLE('',#514886,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514887 = STYLED_ITEM('color',(#514888),#72405); +#514888 = PRESENTATION_STYLE_ASSIGNMENT((#514889,#514894)); +#514889 = SURFACE_STYLE_USAGE(.BOTH.,#514890); +#514890 = SURFACE_SIDE_STYLE('',(#514891)); +#514891 = SURFACE_STYLE_FILL_AREA(#514892); +#514892 = FILL_AREA_STYLE('',(#514893)); +#514893 = FILL_AREA_STYLE_COLOUR('',#512538); +#514894 = CURVE_STYLE('',#514895,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514896 = STYLED_ITEM('color',(#514897),#72417); +#514897 = PRESENTATION_STYLE_ASSIGNMENT((#514898,#514903)); +#514898 = SURFACE_STYLE_USAGE(.BOTH.,#514899); +#514899 = SURFACE_SIDE_STYLE('',(#514900)); +#514900 = SURFACE_STYLE_FILL_AREA(#514901); +#514901 = FILL_AREA_STYLE('',(#514902)); +#514902 = FILL_AREA_STYLE_COLOUR('',#513578); +#514903 = CURVE_STYLE('',#514904,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514905 = STYLED_ITEM('color',(#514906),#72429); +#514906 = PRESENTATION_STYLE_ASSIGNMENT((#514907,#514912)); +#514907 = SURFACE_STYLE_USAGE(.BOTH.,#514908); +#514908 = SURFACE_SIDE_STYLE('',(#514909)); +#514909 = SURFACE_STYLE_FILL_AREA(#514910); +#514910 = FILL_AREA_STYLE('',(#514911)); +#514911 = FILL_AREA_STYLE_COLOUR('',#513578); +#514912 = CURVE_STYLE('',#514913,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514914 = STYLED_ITEM('color',(#514915),#72577); +#514915 = PRESENTATION_STYLE_ASSIGNMENT((#514916,#514921)); +#514916 = SURFACE_STYLE_USAGE(.BOTH.,#514917); +#514917 = SURFACE_SIDE_STYLE('',(#514918)); +#514918 = SURFACE_STYLE_FILL_AREA(#514919); +#514919 = FILL_AREA_STYLE('',(#514920)); +#514920 = FILL_AREA_STYLE_COLOUR('',#513578); +#514921 = CURVE_STYLE('',#514922,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#514922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514923 = STYLED_ITEM('color',(#514924),#72589); +#514924 = PRESENTATION_STYLE_ASSIGNMENT((#514925,#514930)); +#514925 = SURFACE_STYLE_USAGE(.BOTH.,#514926); +#514926 = SURFACE_SIDE_STYLE('',(#514927)); +#514927 = SURFACE_STYLE_FILL_AREA(#514928); +#514928 = FILL_AREA_STYLE('',(#514929)); +#514929 = FILL_AREA_STYLE_COLOUR('',#512538); +#514930 = CURVE_STYLE('',#514931,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514932 = STYLED_ITEM('color',(#514933),#72620); +#514933 = PRESENTATION_STYLE_ASSIGNMENT((#514934,#514939)); +#514934 = SURFACE_STYLE_USAGE(.BOTH.,#514935); +#514935 = SURFACE_SIDE_STYLE('',(#514936)); +#514936 = SURFACE_STYLE_FILL_AREA(#514937); +#514937 = FILL_AREA_STYLE('',(#514938)); +#514938 = FILL_AREA_STYLE_COLOUR('',#512538); +#514939 = CURVE_STYLE('',#514940,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514941 = STYLED_ITEM('color',(#514942),#72644); +#514942 = PRESENTATION_STYLE_ASSIGNMENT((#514943,#514948)); +#514943 = SURFACE_STYLE_USAGE(.BOTH.,#514944); +#514944 = SURFACE_SIDE_STYLE('',(#514945)); +#514945 = SURFACE_STYLE_FILL_AREA(#514946); +#514946 = FILL_AREA_STYLE('',(#514947)); +#514947 = FILL_AREA_STYLE_COLOUR('',#512538); +#514948 = CURVE_STYLE('',#514949,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514950 = STYLED_ITEM('color',(#514951),#72668); +#514951 = PRESENTATION_STYLE_ASSIGNMENT((#514952,#514957)); +#514952 = SURFACE_STYLE_USAGE(.BOTH.,#514953); +#514953 = SURFACE_SIDE_STYLE('',(#514954)); +#514954 = SURFACE_STYLE_FILL_AREA(#514955); +#514955 = FILL_AREA_STYLE('',(#514956)); +#514956 = FILL_AREA_STYLE_COLOUR('',#512538); +#514957 = CURVE_STYLE('',#514958,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514959 = STYLED_ITEM('color',(#514960),#72685); +#514960 = PRESENTATION_STYLE_ASSIGNMENT((#514961,#514966)); +#514961 = SURFACE_STYLE_USAGE(.BOTH.,#514962); +#514962 = SURFACE_SIDE_STYLE('',(#514963)); +#514963 = SURFACE_STYLE_FILL_AREA(#514964); +#514964 = FILL_AREA_STYLE('',(#514965)); +#514965 = FILL_AREA_STYLE_COLOUR('',#512538); +#514966 = CURVE_STYLE('',#514967,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514968 = STYLED_ITEM('color',(#514969),#72716); +#514969 = PRESENTATION_STYLE_ASSIGNMENT((#514970,#514975)); +#514970 = SURFACE_STYLE_USAGE(.BOTH.,#514971); +#514971 = SURFACE_SIDE_STYLE('',(#514972)); +#514972 = SURFACE_STYLE_FILL_AREA(#514973); +#514973 = FILL_AREA_STYLE('',(#514974)); +#514974 = FILL_AREA_STYLE_COLOUR('',#512538); +#514975 = CURVE_STYLE('',#514976,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514977 = STYLED_ITEM('color',(#514978),#72740); +#514978 = PRESENTATION_STYLE_ASSIGNMENT((#514979,#514984)); +#514979 = SURFACE_STYLE_USAGE(.BOTH.,#514980); +#514980 = SURFACE_SIDE_STYLE('',(#514981)); +#514981 = SURFACE_STYLE_FILL_AREA(#514982); +#514982 = FILL_AREA_STYLE('',(#514983)); +#514983 = FILL_AREA_STYLE_COLOUR('',#512538); +#514984 = CURVE_STYLE('',#514985,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514986 = STYLED_ITEM('color',(#514987),#72764); +#514987 = PRESENTATION_STYLE_ASSIGNMENT((#514988,#514993)); +#514988 = SURFACE_STYLE_USAGE(.BOTH.,#514989); +#514989 = SURFACE_SIDE_STYLE('',(#514990)); +#514990 = SURFACE_STYLE_FILL_AREA(#514991); +#514991 = FILL_AREA_STYLE('',(#514992)); +#514992 = FILL_AREA_STYLE_COLOUR('',#512538); +#514993 = CURVE_STYLE('',#514994,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#514994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#514995 = STYLED_ITEM('color',(#514996),#72781); +#514996 = PRESENTATION_STYLE_ASSIGNMENT((#514997,#515002)); +#514997 = SURFACE_STYLE_USAGE(.BOTH.,#514998); +#514998 = SURFACE_SIDE_STYLE('',(#514999)); +#514999 = SURFACE_STYLE_FILL_AREA(#515000); +#515000 = FILL_AREA_STYLE('',(#515001)); +#515001 = FILL_AREA_STYLE_COLOUR('',#512538); +#515002 = CURVE_STYLE('',#515003,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515004 = STYLED_ITEM('color',(#515005),#72812); +#515005 = PRESENTATION_STYLE_ASSIGNMENT((#515006,#515011)); +#515006 = SURFACE_STYLE_USAGE(.BOTH.,#515007); +#515007 = SURFACE_SIDE_STYLE('',(#515008)); +#515008 = SURFACE_STYLE_FILL_AREA(#515009); +#515009 = FILL_AREA_STYLE('',(#515010)); +#515010 = FILL_AREA_STYLE_COLOUR('',#512538); +#515011 = CURVE_STYLE('',#515012,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515013 = STYLED_ITEM('color',(#515014),#72836); +#515014 = PRESENTATION_STYLE_ASSIGNMENT((#515015,#515020)); +#515015 = SURFACE_STYLE_USAGE(.BOTH.,#515016); +#515016 = SURFACE_SIDE_STYLE('',(#515017)); +#515017 = SURFACE_STYLE_FILL_AREA(#515018); +#515018 = FILL_AREA_STYLE('',(#515019)); +#515019 = FILL_AREA_STYLE_COLOUR('',#512538); +#515020 = CURVE_STYLE('',#515021,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515022 = STYLED_ITEM('color',(#515023),#72860); +#515023 = PRESENTATION_STYLE_ASSIGNMENT((#515024,#515029)); +#515024 = SURFACE_STYLE_USAGE(.BOTH.,#515025); +#515025 = SURFACE_SIDE_STYLE('',(#515026)); +#515026 = SURFACE_STYLE_FILL_AREA(#515027); +#515027 = FILL_AREA_STYLE('',(#515028)); +#515028 = FILL_AREA_STYLE_COLOUR('',#512538); +#515029 = CURVE_STYLE('',#515030,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515031 = STYLED_ITEM('color',(#515032),#72877); +#515032 = PRESENTATION_STYLE_ASSIGNMENT((#515033,#515038)); +#515033 = SURFACE_STYLE_USAGE(.BOTH.,#515034); +#515034 = SURFACE_SIDE_STYLE('',(#515035)); +#515035 = SURFACE_STYLE_FILL_AREA(#515036); +#515036 = FILL_AREA_STYLE('',(#515037)); +#515037 = FILL_AREA_STYLE_COLOUR('',#512538); +#515038 = CURVE_STYLE('',#515039,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515040 = STYLED_ITEM('color',(#515041),#72908); +#515041 = PRESENTATION_STYLE_ASSIGNMENT((#515042,#515047)); +#515042 = SURFACE_STYLE_USAGE(.BOTH.,#515043); +#515043 = SURFACE_SIDE_STYLE('',(#515044)); +#515044 = SURFACE_STYLE_FILL_AREA(#515045); +#515045 = FILL_AREA_STYLE('',(#515046)); +#515046 = FILL_AREA_STYLE_COLOUR('',#512538); +#515047 = CURVE_STYLE('',#515048,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515049 = STYLED_ITEM('color',(#515050),#72932); +#515050 = PRESENTATION_STYLE_ASSIGNMENT((#515051,#515056)); +#515051 = SURFACE_STYLE_USAGE(.BOTH.,#515052); +#515052 = SURFACE_SIDE_STYLE('',(#515053)); +#515053 = SURFACE_STYLE_FILL_AREA(#515054); +#515054 = FILL_AREA_STYLE('',(#515055)); +#515055 = FILL_AREA_STYLE_COLOUR('',#512538); +#515056 = CURVE_STYLE('',#515057,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515058 = STYLED_ITEM('color',(#515059),#72956); +#515059 = PRESENTATION_STYLE_ASSIGNMENT((#515060,#515065)); +#515060 = SURFACE_STYLE_USAGE(.BOTH.,#515061); +#515061 = SURFACE_SIDE_STYLE('',(#515062)); +#515062 = SURFACE_STYLE_FILL_AREA(#515063); +#515063 = FILL_AREA_STYLE('',(#515064)); +#515064 = FILL_AREA_STYLE_COLOUR('',#512538); +#515065 = CURVE_STYLE('',#515066,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515067 = STYLED_ITEM('color',(#515068),#72973); +#515068 = PRESENTATION_STYLE_ASSIGNMENT((#515069,#515074)); +#515069 = SURFACE_STYLE_USAGE(.BOTH.,#515070); +#515070 = SURFACE_SIDE_STYLE('',(#515071)); +#515071 = SURFACE_STYLE_FILL_AREA(#515072); +#515072 = FILL_AREA_STYLE('',(#515073)); +#515073 = FILL_AREA_STYLE_COLOUR('',#512538); +#515074 = CURVE_STYLE('',#515075,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515076 = STYLED_ITEM('color',(#515077),#72985); +#515077 = PRESENTATION_STYLE_ASSIGNMENT((#515078,#515083)); +#515078 = SURFACE_STYLE_USAGE(.BOTH.,#515079); +#515079 = SURFACE_SIDE_STYLE('',(#515080)); +#515080 = SURFACE_STYLE_FILL_AREA(#515081); +#515081 = FILL_AREA_STYLE('',(#515082)); +#515082 = FILL_AREA_STYLE_COLOUR('',#512538); +#515083 = CURVE_STYLE('',#515084,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515085 = STYLED_ITEM('color',(#515086),#72997); +#515086 = PRESENTATION_STYLE_ASSIGNMENT((#515087,#515092)); +#515087 = SURFACE_STYLE_USAGE(.BOTH.,#515088); +#515088 = SURFACE_SIDE_STYLE('',(#515089)); +#515089 = SURFACE_STYLE_FILL_AREA(#515090); +#515090 = FILL_AREA_STYLE('',(#515091)); +#515091 = FILL_AREA_STYLE_COLOUR('',#512538); +#515092 = CURVE_STYLE('',#515093,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515094 = STYLED_ITEM('color',(#515095),#73009); +#515095 = PRESENTATION_STYLE_ASSIGNMENT((#515096,#515101)); +#515096 = SURFACE_STYLE_USAGE(.BOTH.,#515097); +#515097 = SURFACE_SIDE_STYLE('',(#515098)); +#515098 = SURFACE_STYLE_FILL_AREA(#515099); +#515099 = FILL_AREA_STYLE('',(#515100)); +#515100 = FILL_AREA_STYLE_COLOUR('',#512538); +#515101 = CURVE_STYLE('',#515102,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#515102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515103 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #515104),#12426); +#515104 = STYLED_ITEM('color',(#515105),#12210); +#515105 = PRESENTATION_STYLE_ASSIGNMENT((#515106,#515112)); +#515106 = SURFACE_STYLE_USAGE(.BOTH.,#515107); +#515107 = SURFACE_SIDE_STYLE('',(#515108)); +#515108 = SURFACE_STYLE_FILL_AREA(#515109); +#515109 = FILL_AREA_STYLE('',(#515110)); +#515110 = FILL_AREA_STYLE_COLOUR('',#515111); +#515111 = COLOUR_RGB('',0.399999997426,0.275999994077,0.); +#515112 = CURVE_STYLE('',#515113,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#515113 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#515114 = COLOUR_RGB('',9.803921802644E-02,9.803921802644E-02, + 9.803921802644E-02); +#515115 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #515116,#515124,#515131,#515138,#515145,#515152,#515159,#515166, + #515173,#515180,#515187,#515194,#515201,#515208,#515215,#515222, + #515229,#515236,#515243,#515250,#515257,#515264,#515271,#515278, + #515285,#515292,#515299,#515306,#515313,#515320,#515327,#515334, + #515341,#515348,#515355,#515362,#515369,#515376,#515383,#515390, + #515397,#515404,#515411,#515418,#515425,#515432,#515439,#515446, + #515453,#515460,#515467,#515474,#515481,#515488,#515495,#515502, + #515509,#515516,#515523,#515530,#515537,#515544,#515551,#515558, + #515565,#515572,#515579,#515586,#515593,#515600,#515607,#515614, + #515621,#515628,#515635,#515642,#515649,#515656,#515663,#515670, + #515677,#515684,#515691,#515698,#515705,#515712,#515719,#515726, + #515733,#515740,#515747,#515754,#515761,#515768,#515775,#515782, + #515789,#515796,#515803,#515810,#515817,#515824,#515831,#515838, + #515845,#515852,#515859,#515866,#515873,#515880,#515887,#515894, + #515901,#515908,#515915,#515922,#515929,#515936,#515943,#515950, + #515957,#515964,#515971,#515978,#515985,#515992,#515999,#516006, + #516013,#516020,#516027,#516034,#516041,#516048,#516055,#516062, + #516069,#516076,#516083,#516090,#516097,#516104,#516111,#516118, + #516125,#516132,#516139,#516146,#516153,#516160,#516167,#516174, + #516181,#516188,#516195,#516202,#516209,#516216,#516223,#516230, + #516237,#516244,#516251,#516258,#516265,#516272,#516279,#516286, + #516293,#516300,#516307,#516314,#516321,#516328,#516335,#516342, + #516349,#516356,#516363,#516370,#516377,#516384,#516391,#516398, + #516405,#516412,#516419,#516426,#516433,#516440,#516447,#516454, + #516461,#516468,#516475,#516482,#516489,#516496,#516503,#516510, + #516517,#516524,#516531,#516538,#516545,#516552,#516559,#516566, + #516573,#516580,#516587,#516594,#516601,#516608,#516615,#516622, + #516629,#516636,#516643,#516650,#516657,#516664,#516671,#516678, + #516685,#516692,#516699,#516706,#516713,#516720,#516727,#516734, + #516741,#516748,#516755,#516762,#516769),#484094); +#515116 = STYLED_ITEM('color',(#515117),#450677); +#515117 = PRESENTATION_STYLE_ASSIGNMENT((#515118)); +#515118 = SURFACE_STYLE_USAGE(.BOTH.,#515119); +#515119 = SURFACE_SIDE_STYLE('',(#515120)); +#515120 = SURFACE_STYLE_FILL_AREA(#515121); +#515121 = FILL_AREA_STYLE('',(#515122)); +#515122 = FILL_AREA_STYLE_COLOUR('',#515123); +#515123 = COLOUR_RGB('',0.982560078588,0.982560078588,0.982560078588); +#515124 = STYLED_ITEM('color',(#515125),#451139); +#515125 = PRESENTATION_STYLE_ASSIGNMENT((#515126)); +#515126 = SURFACE_STYLE_USAGE(.BOTH.,#515127); +#515127 = SURFACE_SIDE_STYLE('',(#515128)); +#515128 = SURFACE_STYLE_FILL_AREA(#515129); +#515129 = FILL_AREA_STYLE('',(#515130)); +#515130 = FILL_AREA_STYLE_COLOUR('',#515123); +#515131 = STYLED_ITEM('color',(#515132),#451897); +#515132 = PRESENTATION_STYLE_ASSIGNMENT((#515133)); +#515133 = SURFACE_STYLE_USAGE(.BOTH.,#515134); +#515134 = SURFACE_SIDE_STYLE('',(#515135)); +#515135 = SURFACE_STYLE_FILL_AREA(#515136); +#515136 = FILL_AREA_STYLE('',(#515137)); +#515137 = FILL_AREA_STYLE_COLOUR('',#515123); +#515138 = STYLED_ITEM('color',(#515139),#451991); +#515139 = PRESENTATION_STYLE_ASSIGNMENT((#515140)); +#515140 = SURFACE_STYLE_USAGE(.BOTH.,#515141); +#515141 = SURFACE_SIDE_STYLE('',(#515142)); +#515142 = SURFACE_STYLE_FILL_AREA(#515143); +#515143 = FILL_AREA_STYLE('',(#515144)); +#515144 = FILL_AREA_STYLE_COLOUR('',#515123); +#515145 = STYLED_ITEM('color',(#515146),#452359); +#515146 = PRESENTATION_STYLE_ASSIGNMENT((#515147)); +#515147 = SURFACE_STYLE_USAGE(.BOTH.,#515148); +#515148 = SURFACE_SIDE_STYLE('',(#515149)); +#515149 = SURFACE_STYLE_FILL_AREA(#515150); +#515150 = FILL_AREA_STYLE('',(#515151)); +#515151 = FILL_AREA_STYLE_COLOUR('',#515123); +#515152 = STYLED_ITEM('color',(#515153),#453569); +#515153 = PRESENTATION_STYLE_ASSIGNMENT((#515154)); +#515154 = SURFACE_STYLE_USAGE(.BOTH.,#515155); +#515155 = SURFACE_SIDE_STYLE('',(#515156)); +#515156 = SURFACE_STYLE_FILL_AREA(#515157); +#515157 = FILL_AREA_STYLE('',(#515158)); +#515158 = FILL_AREA_STYLE_COLOUR('',#515123); +#515159 = STYLED_ITEM('color',(#515160),#453855); +#515160 = PRESENTATION_STYLE_ASSIGNMENT((#515161)); +#515161 = SURFACE_STYLE_USAGE(.BOTH.,#515162); +#515162 = SURFACE_SIDE_STYLE('',(#515163)); +#515163 = SURFACE_STYLE_FILL_AREA(#515164); +#515164 = FILL_AREA_STYLE('',(#515165)); +#515165 = FILL_AREA_STYLE_COLOUR('',#515123); +#515166 = STYLED_ITEM('color',(#515167),#453957); +#515167 = PRESENTATION_STYLE_ASSIGNMENT((#515168)); +#515168 = SURFACE_STYLE_USAGE(.BOTH.,#515169); +#515169 = SURFACE_SIDE_STYLE('',(#515170)); +#515170 = SURFACE_STYLE_FILL_AREA(#515171); +#515171 = FILL_AREA_STYLE('',(#515172)); +#515172 = FILL_AREA_STYLE_COLOUR('',#515123); +#515173 = STYLED_ITEM('color',(#515174),#454114); +#515174 = PRESENTATION_STYLE_ASSIGNMENT((#515175)); +#515175 = SURFACE_STYLE_USAGE(.BOTH.,#515176); +#515176 = SURFACE_SIDE_STYLE('',(#515177)); +#515177 = SURFACE_STYLE_FILL_AREA(#515178); +#515178 = FILL_AREA_STYLE('',(#515179)); +#515179 = FILL_AREA_STYLE_COLOUR('',#515123); +#515180 = STYLED_ITEM('color',(#515181),#454353); +#515181 = PRESENTATION_STYLE_ASSIGNMENT((#515182)); +#515182 = SURFACE_STYLE_USAGE(.BOTH.,#515183); +#515183 = SURFACE_SIDE_STYLE('',(#515184)); +#515184 = SURFACE_STYLE_FILL_AREA(#515185); +#515185 = FILL_AREA_STYLE('',(#515186)); +#515186 = FILL_AREA_STYLE_COLOUR('',#515123); +#515187 = STYLED_ITEM('color',(#515188),#454633); +#515188 = PRESENTATION_STYLE_ASSIGNMENT((#515189)); +#515189 = SURFACE_STYLE_USAGE(.BOTH.,#515190); +#515190 = SURFACE_SIDE_STYLE('',(#515191)); +#515191 = SURFACE_STYLE_FILL_AREA(#515192); +#515192 = FILL_AREA_STYLE('',(#515193)); +#515193 = FILL_AREA_STYLE_COLOUR('',#515123); +#515194 = STYLED_ITEM('color',(#515195),#456027); +#515195 = PRESENTATION_STYLE_ASSIGNMENT((#515196)); +#515196 = SURFACE_STYLE_USAGE(.BOTH.,#515197); +#515197 = SURFACE_SIDE_STYLE('',(#515198)); +#515198 = SURFACE_STYLE_FILL_AREA(#515199); +#515199 = FILL_AREA_STYLE('',(#515200)); +#515200 = FILL_AREA_STYLE_COLOUR('',#515123); +#515201 = STYLED_ITEM('color',(#515202),#456111); +#515202 = PRESENTATION_STYLE_ASSIGNMENT((#515203)); +#515203 = SURFACE_STYLE_USAGE(.BOTH.,#515204); +#515204 = SURFACE_SIDE_STYLE('',(#515205)); +#515205 = SURFACE_STYLE_FILL_AREA(#515206); +#515206 = FILL_AREA_STYLE('',(#515207)); +#515207 = FILL_AREA_STYLE_COLOUR('',#515123); +#515208 = STYLED_ITEM('color',(#515209),#456195); +#515209 = PRESENTATION_STYLE_ASSIGNMENT((#515210)); +#515210 = SURFACE_STYLE_USAGE(.BOTH.,#515211); +#515211 = SURFACE_SIDE_STYLE('',(#515212)); +#515212 = SURFACE_STYLE_FILL_AREA(#515213); +#515213 = FILL_AREA_STYLE('',(#515214)); +#515214 = FILL_AREA_STYLE_COLOUR('',#515123); +#515215 = STYLED_ITEM('color',(#515216),#456427); +#515216 = PRESENTATION_STYLE_ASSIGNMENT((#515217)); +#515217 = SURFACE_STYLE_USAGE(.BOTH.,#515218); +#515218 = SURFACE_SIDE_STYLE('',(#515219)); +#515219 = SURFACE_STYLE_FILL_AREA(#515220); +#515220 = FILL_AREA_STYLE('',(#515221)); +#515221 = FILL_AREA_STYLE_COLOUR('',#515123); +#515222 = STYLED_ITEM('color',(#515223),#456589); +#515223 = PRESENTATION_STYLE_ASSIGNMENT((#515224)); +#515224 = SURFACE_STYLE_USAGE(.BOTH.,#515225); +#515225 = SURFACE_SIDE_STYLE('',(#515226)); +#515226 = SURFACE_STYLE_FILL_AREA(#515227); +#515227 = FILL_AREA_STYLE('',(#515228)); +#515228 = FILL_AREA_STYLE_COLOUR('',#515123); +#515229 = STYLED_ITEM('color',(#515230),#456691); +#515230 = PRESENTATION_STYLE_ASSIGNMENT((#515231)); +#515231 = SURFACE_STYLE_USAGE(.BOTH.,#515232); +#515232 = SURFACE_SIDE_STYLE('',(#515233)); +#515233 = SURFACE_STYLE_FILL_AREA(#515234); +#515234 = FILL_AREA_STYLE('',(#515235)); +#515235 = FILL_AREA_STYLE_COLOUR('',#515123); +#515236 = STYLED_ITEM('color',(#515237),#456853); +#515237 = PRESENTATION_STYLE_ASSIGNMENT((#515238)); +#515238 = SURFACE_STYLE_USAGE(.BOTH.,#515239); +#515239 = SURFACE_SIDE_STYLE('',(#515240)); +#515240 = SURFACE_STYLE_FILL_AREA(#515241); +#515241 = FILL_AREA_STYLE('',(#515242)); +#515242 = FILL_AREA_STYLE_COLOUR('',#515123); +#515243 = STYLED_ITEM('color',(#515244),#457027); +#515244 = PRESENTATION_STYLE_ASSIGNMENT((#515245)); +#515245 = SURFACE_STYLE_USAGE(.BOTH.,#515246); +#515246 = SURFACE_SIDE_STYLE('',(#515247)); +#515247 = SURFACE_STYLE_FILL_AREA(#515248); +#515248 = FILL_AREA_STYLE('',(#515249)); +#515249 = FILL_AREA_STYLE_COLOUR('',#515123); +#515250 = STYLED_ITEM('color',(#515251),#457162); +#515251 = PRESENTATION_STYLE_ASSIGNMENT((#515252)); +#515252 = SURFACE_STYLE_USAGE(.BOTH.,#515253); +#515253 = SURFACE_SIDE_STYLE('',(#515254)); +#515254 = SURFACE_STYLE_FILL_AREA(#515255); +#515255 = FILL_AREA_STYLE('',(#515256)); +#515256 = FILL_AREA_STYLE_COLOUR('',#515123); +#515257 = STYLED_ITEM('color',(#515258),#457319); +#515258 = PRESENTATION_STYLE_ASSIGNMENT((#515259)); +#515259 = SURFACE_STYLE_USAGE(.BOTH.,#515260); +#515260 = SURFACE_SIDE_STYLE('',(#515261)); +#515261 = SURFACE_STYLE_FILL_AREA(#515262); +#515262 = FILL_AREA_STYLE('',(#515263)); +#515263 = FILL_AREA_STYLE_COLOUR('',#515123); +#515264 = STYLED_ITEM('color',(#515265),#457421); +#515265 = PRESENTATION_STYLE_ASSIGNMENT((#515266)); +#515266 = SURFACE_STYLE_USAGE(.BOTH.,#515267); +#515267 = SURFACE_SIDE_STYLE('',(#515268)); +#515268 = SURFACE_STYLE_FILL_AREA(#515269); +#515269 = FILL_AREA_STYLE('',(#515270)); +#515270 = FILL_AREA_STYLE_COLOUR('',#515123); +#515271 = STYLED_ITEM('color',(#515272),#457583); +#515272 = PRESENTATION_STYLE_ASSIGNMENT((#515273)); +#515273 = SURFACE_STYLE_USAGE(.BOTH.,#515274); +#515274 = SURFACE_SIDE_STYLE('',(#515275)); +#515275 = SURFACE_STYLE_FILL_AREA(#515276); +#515276 = FILL_AREA_STYLE('',(#515277)); +#515277 = FILL_AREA_STYLE_COLOUR('',#515123); +#515278 = STYLED_ITEM('color',(#515279),#457822); +#515279 = PRESENTATION_STYLE_ASSIGNMENT((#515280)); +#515280 = SURFACE_STYLE_USAGE(.BOTH.,#515281); +#515281 = SURFACE_SIDE_STYLE('',(#515282)); +#515282 = SURFACE_STYLE_FILL_AREA(#515283); +#515283 = FILL_AREA_STYLE('',(#515284)); +#515284 = FILL_AREA_STYLE_COLOUR('',#515123); +#515285 = STYLED_ITEM('color',(#515286),#457950); +#515286 = PRESENTATION_STYLE_ASSIGNMENT((#515287)); +#515287 = SURFACE_STYLE_USAGE(.BOTH.,#515288); +#515288 = SURFACE_SIDE_STYLE('',(#515289)); +#515289 = SURFACE_STYLE_FILL_AREA(#515290); +#515290 = FILL_AREA_STYLE('',(#515291)); +#515291 = FILL_AREA_STYLE_COLOUR('',#515123); +#515292 = STYLED_ITEM('color',(#515293),#458000); +#515293 = PRESENTATION_STYLE_ASSIGNMENT((#515294)); +#515294 = SURFACE_STYLE_USAGE(.BOTH.,#515295); +#515295 = SURFACE_SIDE_STYLE('',(#515296)); +#515296 = SURFACE_STYLE_FILL_AREA(#515297); +#515297 = FILL_AREA_STYLE('',(#515298)); +#515298 = FILL_AREA_STYLE_COLOUR('',#515123); +#515299 = STYLED_ITEM('color',(#515300),#458050); +#515300 = PRESENTATION_STYLE_ASSIGNMENT((#515301)); +#515301 = SURFACE_STYLE_USAGE(.BOTH.,#515302); +#515302 = SURFACE_SIDE_STYLE('',(#515303)); +#515303 = SURFACE_STYLE_FILL_AREA(#515304); +#515304 = FILL_AREA_STYLE('',(#515305)); +#515305 = FILL_AREA_STYLE_COLOUR('',#515123); +#515306 = STYLED_ITEM('color',(#515307),#458100); +#515307 = PRESENTATION_STYLE_ASSIGNMENT((#515308)); +#515308 = SURFACE_STYLE_USAGE(.BOTH.,#515309); +#515309 = SURFACE_SIDE_STYLE('',(#515310)); +#515310 = SURFACE_STYLE_FILL_AREA(#515311); +#515311 = FILL_AREA_STYLE('',(#515312)); +#515312 = FILL_AREA_STYLE_COLOUR('',#515123); +#515313 = STYLED_ITEM('color',(#515314),#458150); +#515314 = PRESENTATION_STYLE_ASSIGNMENT((#515315)); +#515315 = SURFACE_STYLE_USAGE(.BOTH.,#515316); +#515316 = SURFACE_SIDE_STYLE('',(#515317)); +#515317 = SURFACE_STYLE_FILL_AREA(#515318); +#515318 = FILL_AREA_STYLE('',(#515319)); +#515319 = FILL_AREA_STYLE_COLOUR('',#515123); +#515320 = STYLED_ITEM('color',(#515321),#460188); +#515321 = PRESENTATION_STYLE_ASSIGNMENT((#515322)); +#515322 = SURFACE_STYLE_USAGE(.BOTH.,#515323); +#515323 = SURFACE_SIDE_STYLE('',(#515324)); +#515324 = SURFACE_STYLE_FILL_AREA(#515325); +#515325 = FILL_AREA_STYLE('',(#515326)); +#515326 = FILL_AREA_STYLE_COLOUR('',#515123); +#515327 = STYLED_ITEM('color',(#515328),#460238); +#515328 = PRESENTATION_STYLE_ASSIGNMENT((#515329)); +#515329 = SURFACE_STYLE_USAGE(.BOTH.,#515330); +#515330 = SURFACE_SIDE_STYLE('',(#515331)); +#515331 = SURFACE_STYLE_FILL_AREA(#515332); +#515332 = FILL_AREA_STYLE('',(#515333)); +#515333 = FILL_AREA_STYLE_COLOUR('',#515123); +#515334 = STYLED_ITEM('color',(#515335),#460288); +#515335 = PRESENTATION_STYLE_ASSIGNMENT((#515336)); +#515336 = SURFACE_STYLE_USAGE(.BOTH.,#515337); +#515337 = SURFACE_SIDE_STYLE('',(#515338)); +#515338 = SURFACE_STYLE_FILL_AREA(#515339); +#515339 = FILL_AREA_STYLE('',(#515340)); +#515340 = FILL_AREA_STYLE_COLOUR('',#515123); +#515341 = STYLED_ITEM('color',(#515342),#460338); +#515342 = PRESENTATION_STYLE_ASSIGNMENT((#515343)); +#515343 = SURFACE_STYLE_USAGE(.BOTH.,#515344); +#515344 = SURFACE_SIDE_STYLE('',(#515345)); +#515345 = SURFACE_STYLE_FILL_AREA(#515346); +#515346 = FILL_AREA_STYLE('',(#515347)); +#515347 = FILL_AREA_STYLE_COLOUR('',#515123); +#515348 = STYLED_ITEM('color',(#515349),#460562); +#515349 = PRESENTATION_STYLE_ASSIGNMENT((#515350)); +#515350 = SURFACE_STYLE_USAGE(.BOTH.,#515351); +#515351 = SURFACE_SIDE_STYLE('',(#515352)); +#515352 = SURFACE_STYLE_FILL_AREA(#515353); +#515353 = FILL_AREA_STYLE('',(#515354)); +#515354 = FILL_AREA_STYLE_COLOUR('',#515123); +#515355 = STYLED_ITEM('color',(#515356),#460612); +#515356 = PRESENTATION_STYLE_ASSIGNMENT((#515357)); +#515357 = SURFACE_STYLE_USAGE(.BOTH.,#515358); +#515358 = SURFACE_SIDE_STYLE('',(#515359)); +#515359 = SURFACE_STYLE_FILL_AREA(#515360); +#515360 = FILL_AREA_STYLE('',(#515361)); +#515361 = FILL_AREA_STYLE_COLOUR('',#515123); +#515362 = STYLED_ITEM('color',(#515363),#460662); +#515363 = PRESENTATION_STYLE_ASSIGNMENT((#515364)); +#515364 = SURFACE_STYLE_USAGE(.BOTH.,#515365); +#515365 = SURFACE_SIDE_STYLE('',(#515366)); +#515366 = SURFACE_STYLE_FILL_AREA(#515367); +#515367 = FILL_AREA_STYLE('',(#515368)); +#515368 = FILL_AREA_STYLE_COLOUR('',#515123); +#515369 = STYLED_ITEM('color',(#515370),#460738); +#515370 = PRESENTATION_STYLE_ASSIGNMENT((#515371)); +#515371 = SURFACE_STYLE_USAGE(.BOTH.,#515372); +#515372 = SURFACE_SIDE_STYLE('',(#515373)); +#515373 = SURFACE_STYLE_FILL_AREA(#515374); +#515374 = FILL_AREA_STYLE('',(#515375)); +#515375 = FILL_AREA_STYLE_COLOUR('',#515123); +#515376 = STYLED_ITEM('color',(#515377),#460969); +#515377 = PRESENTATION_STYLE_ASSIGNMENT((#515378)); +#515378 = SURFACE_STYLE_USAGE(.BOTH.,#515379); +#515379 = SURFACE_SIDE_STYLE('',(#515380)); +#515380 = SURFACE_STYLE_FILL_AREA(#515381); +#515381 = FILL_AREA_STYLE('',(#515382)); +#515382 = FILL_AREA_STYLE_COLOUR('',#515123); +#515383 = STYLED_ITEM('color',(#515384),#461019); +#515384 = PRESENTATION_STYLE_ASSIGNMENT((#515385)); +#515385 = SURFACE_STYLE_USAGE(.BOTH.,#515386); +#515386 = SURFACE_SIDE_STYLE('',(#515387)); +#515387 = SURFACE_STYLE_FILL_AREA(#515388); +#515388 = FILL_AREA_STYLE('',(#515389)); +#515389 = FILL_AREA_STYLE_COLOUR('',#515123); +#515390 = STYLED_ITEM('color',(#515391),#461250); +#515391 = PRESENTATION_STYLE_ASSIGNMENT((#515392)); +#515392 = SURFACE_STYLE_USAGE(.BOTH.,#515393); +#515393 = SURFACE_SIDE_STYLE('',(#515394)); +#515394 = SURFACE_STYLE_FILL_AREA(#515395); +#515395 = FILL_AREA_STYLE('',(#515396)); +#515396 = FILL_AREA_STYLE_COLOUR('',#515123); +#515397 = STYLED_ITEM('color',(#515398),#461300); +#515398 = PRESENTATION_STYLE_ASSIGNMENT((#515399)); +#515399 = SURFACE_STYLE_USAGE(.BOTH.,#515400); +#515400 = SURFACE_SIDE_STYLE('',(#515401)); +#515401 = SURFACE_STYLE_FILL_AREA(#515402); +#515402 = FILL_AREA_STYLE('',(#515403)); +#515403 = FILL_AREA_STYLE_COLOUR('',#515123); +#515404 = STYLED_ITEM('color',(#515405),#461350); +#515405 = PRESENTATION_STYLE_ASSIGNMENT((#515406)); +#515406 = SURFACE_STYLE_USAGE(.BOTH.,#515407); +#515407 = SURFACE_SIDE_STYLE('',(#515408)); +#515408 = SURFACE_STYLE_FILL_AREA(#515409); +#515409 = FILL_AREA_STYLE('',(#515410)); +#515410 = FILL_AREA_STYLE_COLOUR('',#515123); +#515411 = STYLED_ITEM('color',(#515412),#461636); +#515412 = PRESENTATION_STYLE_ASSIGNMENT((#515413)); +#515413 = SURFACE_STYLE_USAGE(.BOTH.,#515414); +#515414 = SURFACE_SIDE_STYLE('',(#515415)); +#515415 = SURFACE_STYLE_FILL_AREA(#515416); +#515416 = FILL_AREA_STYLE('',(#515417)); +#515417 = FILL_AREA_STYLE_COLOUR('',#515123); +#515418 = STYLED_ITEM('color',(#515419),#461702); +#515419 = PRESENTATION_STYLE_ASSIGNMENT((#515420)); +#515420 = SURFACE_STYLE_USAGE(.BOTH.,#515421); +#515421 = SURFACE_SIDE_STYLE('',(#515422)); +#515422 = SURFACE_STYLE_FILL_AREA(#515423); +#515423 = FILL_AREA_STYLE('',(#515424)); +#515424 = FILL_AREA_STYLE_COLOUR('',#515123); +#515425 = STYLED_ITEM('color',(#515426),#461859); +#515426 = PRESENTATION_STYLE_ASSIGNMENT((#515427)); +#515427 = SURFACE_STYLE_USAGE(.BOTH.,#515428); +#515428 = SURFACE_SIDE_STYLE('',(#515429)); +#515429 = SURFACE_STYLE_FILL_AREA(#515430); +#515430 = FILL_AREA_STYLE('',(#515431)); +#515431 = FILL_AREA_STYLE_COLOUR('',#515123); +#515432 = STYLED_ITEM('color',(#515433),#462052); +#515433 = PRESENTATION_STYLE_ASSIGNMENT((#515434)); +#515434 = SURFACE_STYLE_USAGE(.BOTH.,#515435); +#515435 = SURFACE_SIDE_STYLE('',(#515436)); +#515436 = SURFACE_STYLE_FILL_AREA(#515437); +#515437 = FILL_AREA_STYLE('',(#515438)); +#515438 = FILL_AREA_STYLE_COLOUR('',#515123); +#515439 = STYLED_ITEM('color',(#515440),#462102); +#515440 = PRESENTATION_STYLE_ASSIGNMENT((#515441)); +#515441 = SURFACE_STYLE_USAGE(.BOTH.,#515442); +#515442 = SURFACE_SIDE_STYLE('',(#515443)); +#515443 = SURFACE_STYLE_FILL_AREA(#515444); +#515444 = FILL_AREA_STYLE('',(#515445)); +#515445 = FILL_AREA_STYLE_COLOUR('',#515123); +#515446 = STYLED_ITEM('color',(#515447),#462320); +#515447 = PRESENTATION_STYLE_ASSIGNMENT((#515448)); +#515448 = SURFACE_STYLE_USAGE(.BOTH.,#515449); +#515449 = SURFACE_SIDE_STYLE('',(#515450)); +#515450 = SURFACE_STYLE_FILL_AREA(#515451); +#515451 = FILL_AREA_STYLE('',(#515452)); +#515452 = FILL_AREA_STYLE_COLOUR('',#515123); +#515453 = STYLED_ITEM('color',(#515454),#464000); +#515454 = PRESENTATION_STYLE_ASSIGNMENT((#515455)); +#515455 = SURFACE_STYLE_USAGE(.BOTH.,#515456); +#515456 = SURFACE_SIDE_STYLE('',(#515457)); +#515457 = SURFACE_STYLE_FILL_AREA(#515458); +#515458 = FILL_AREA_STYLE('',(#515459)); +#515459 = FILL_AREA_STYLE_COLOUR('',#515123); +#515460 = STYLED_ITEM('color',(#515461),#464165); +#515461 = PRESENTATION_STYLE_ASSIGNMENT((#515462)); +#515462 = SURFACE_STYLE_USAGE(.BOTH.,#515463); +#515463 = SURFACE_SIDE_STYLE('',(#515464)); +#515464 = SURFACE_STYLE_FILL_AREA(#515465); +#515465 = FILL_AREA_STYLE('',(#515466)); +#515466 = FILL_AREA_STYLE_COLOUR('',#515123); +#515467 = STYLED_ITEM('color',(#515468),#464383); +#515468 = PRESENTATION_STYLE_ASSIGNMENT((#515469)); +#515469 = SURFACE_STYLE_USAGE(.BOTH.,#515470); +#515470 = SURFACE_SIDE_STYLE('',(#515471)); +#515471 = SURFACE_STYLE_FILL_AREA(#515472); +#515472 = FILL_AREA_STYLE('',(#515473)); +#515473 = FILL_AREA_STYLE_COLOUR('',#515123); +#515474 = STYLED_ITEM('color',(#515475),#464433); +#515475 = PRESENTATION_STYLE_ASSIGNMENT((#515476)); +#515476 = SURFACE_STYLE_USAGE(.BOTH.,#515477); +#515477 = SURFACE_SIDE_STYLE('',(#515478)); +#515478 = SURFACE_STYLE_FILL_AREA(#515479); +#515479 = FILL_AREA_STYLE('',(#515480)); +#515480 = FILL_AREA_STYLE_COLOUR('',#515123); +#515481 = STYLED_ITEM('color',(#515482),#464524); +#515482 = PRESENTATION_STYLE_ASSIGNMENT((#515483)); +#515483 = SURFACE_STYLE_USAGE(.BOTH.,#515484); +#515484 = SURFACE_SIDE_STYLE('',(#515485)); +#515485 = SURFACE_STYLE_FILL_AREA(#515486); +#515486 = FILL_AREA_STYLE('',(#515487)); +#515487 = FILL_AREA_STYLE_COLOUR('',#515123); +#515488 = STYLED_ITEM('color',(#515489),#464568); +#515489 = PRESENTATION_STYLE_ASSIGNMENT((#515490)); +#515490 = SURFACE_STYLE_USAGE(.BOTH.,#515491); +#515491 = SURFACE_SIDE_STYLE('',(#515492)); +#515492 = SURFACE_STYLE_FILL_AREA(#515493); +#515493 = FILL_AREA_STYLE('',(#515494)); +#515494 = FILL_AREA_STYLE_COLOUR('',#515123); +#515495 = STYLED_ITEM('color',(#515496),#464666); +#515496 = PRESENTATION_STYLE_ASSIGNMENT((#515497)); +#515497 = SURFACE_STYLE_USAGE(.BOTH.,#515498); +#515498 = SURFACE_SIDE_STYLE('',(#515499)); +#515499 = SURFACE_STYLE_FILL_AREA(#515500); +#515500 = FILL_AREA_STYLE('',(#515501)); +#515501 = FILL_AREA_STYLE_COLOUR('',#515123); +#515502 = STYLED_ITEM('color',(#515503),#464823); +#515503 = PRESENTATION_STYLE_ASSIGNMENT((#515504)); +#515504 = SURFACE_STYLE_USAGE(.BOTH.,#515505); +#515505 = SURFACE_SIDE_STYLE('',(#515506)); +#515506 = SURFACE_STYLE_FILL_AREA(#515507); +#515507 = FILL_AREA_STYLE('',(#515508)); +#515508 = FILL_AREA_STYLE_COLOUR('',#515123); +#515509 = STYLED_ITEM('color',(#515510),#464976); +#515510 = PRESENTATION_STYLE_ASSIGNMENT((#515511)); +#515511 = SURFACE_STYLE_USAGE(.BOTH.,#515512); +#515512 = SURFACE_SIDE_STYLE('',(#515513)); +#515513 = SURFACE_STYLE_FILL_AREA(#515514); +#515514 = FILL_AREA_STYLE('',(#515515)); +#515515 = FILL_AREA_STYLE_COLOUR('',#515123); +#515516 = STYLED_ITEM('color',(#515517),#465042); +#515517 = PRESENTATION_STYLE_ASSIGNMENT((#515518)); +#515518 = SURFACE_STYLE_USAGE(.BOTH.,#515519); +#515519 = SURFACE_SIDE_STYLE('',(#515520)); +#515520 = SURFACE_STYLE_FILL_AREA(#515521); +#515521 = FILL_AREA_STYLE('',(#515522)); +#515522 = FILL_AREA_STYLE_COLOUR('',#515123); +#515523 = STYLED_ITEM('color',(#515524),#465092); +#515524 = PRESENTATION_STYLE_ASSIGNMENT((#515525)); +#515525 = SURFACE_STYLE_USAGE(.BOTH.,#515526); +#515526 = SURFACE_SIDE_STYLE('',(#515527)); +#515527 = SURFACE_STYLE_FILL_AREA(#515528); +#515528 = FILL_AREA_STYLE('',(#515529)); +#515529 = FILL_AREA_STYLE_COLOUR('',#515123); +#515530 = STYLED_ITEM('color',(#515531),#465142); +#515531 = PRESENTATION_STYLE_ASSIGNMENT((#515532)); +#515532 = SURFACE_STYLE_USAGE(.BOTH.,#515533); +#515533 = SURFACE_SIDE_STYLE('',(#515534)); +#515534 = SURFACE_STYLE_FILL_AREA(#515535); +#515535 = FILL_AREA_STYLE('',(#515536)); +#515536 = FILL_AREA_STYLE_COLOUR('',#515123); +#515537 = STYLED_ITEM('color',(#515538),#465192); +#515538 = PRESENTATION_STYLE_ASSIGNMENT((#515539)); +#515539 = SURFACE_STYLE_USAGE(.BOTH.,#515540); +#515540 = SURFACE_SIDE_STYLE('',(#515541)); +#515541 = SURFACE_STYLE_FILL_AREA(#515542); +#515542 = FILL_AREA_STYLE('',(#515543)); +#515543 = FILL_AREA_STYLE_COLOUR('',#515123); +#515544 = STYLED_ITEM('color',(#515545),#465242); +#515545 = PRESENTATION_STYLE_ASSIGNMENT((#515546)); +#515546 = SURFACE_STYLE_USAGE(.BOTH.,#515547); +#515547 = SURFACE_SIDE_STYLE('',(#515548)); +#515548 = SURFACE_STYLE_FILL_AREA(#515549); +#515549 = FILL_AREA_STYLE('',(#515550)); +#515550 = FILL_AREA_STYLE_COLOUR('',#515123); +#515551 = STYLED_ITEM('color',(#515552),#465648); +#515552 = PRESENTATION_STYLE_ASSIGNMENT((#515553)); +#515553 = SURFACE_STYLE_USAGE(.BOTH.,#515554); +#515554 = SURFACE_SIDE_STYLE('',(#515555)); +#515555 = SURFACE_STYLE_FILL_AREA(#515556); +#515556 = FILL_AREA_STYLE('',(#515557)); +#515557 = FILL_AREA_STYLE_COLOUR('',#515123); +#515558 = STYLED_ITEM('color',(#515559),#465966); +#515559 = PRESENTATION_STYLE_ASSIGNMENT((#515560)); +#515560 = SURFACE_STYLE_USAGE(.BOTH.,#515561); +#515561 = SURFACE_SIDE_STYLE('',(#515562)); +#515562 = SURFACE_STYLE_FILL_AREA(#515563); +#515563 = FILL_AREA_STYLE('',(#515564)); +#515564 = FILL_AREA_STYLE_COLOUR('',#515123); +#515565 = STYLED_ITEM('color',(#515566),#466205); +#515566 = PRESENTATION_STYLE_ASSIGNMENT((#515567)); +#515567 = SURFACE_STYLE_USAGE(.BOTH.,#515568); +#515568 = SURFACE_SIDE_STYLE('',(#515569)); +#515569 = SURFACE_STYLE_FILL_AREA(#515570); +#515570 = FILL_AREA_STYLE('',(#515571)); +#515571 = FILL_AREA_STYLE_COLOUR('',#515123); +#515572 = STYLED_ITEM('color',(#515573),#466255); +#515573 = PRESENTATION_STYLE_ASSIGNMENT((#515574)); +#515574 = SURFACE_STYLE_USAGE(.BOTH.,#515575); +#515575 = SURFACE_SIDE_STYLE('',(#515576)); +#515576 = SURFACE_STYLE_FILL_AREA(#515577); +#515577 = FILL_AREA_STYLE('',(#515578)); +#515578 = FILL_AREA_STYLE_COLOUR('',#515123); +#515579 = STYLED_ITEM('color',(#515580),#466305); +#515580 = PRESENTATION_STYLE_ASSIGNMENT((#515581)); +#515581 = SURFACE_STYLE_USAGE(.BOTH.,#515582); +#515582 = SURFACE_SIDE_STYLE('',(#515583)); +#515583 = SURFACE_STYLE_FILL_AREA(#515584); +#515584 = FILL_AREA_STYLE('',(#515585)); +#515585 = FILL_AREA_STYLE_COLOUR('',#515123); +#515586 = STYLED_ITEM('color',(#515587),#466387); +#515587 = PRESENTATION_STYLE_ASSIGNMENT((#515588)); +#515588 = SURFACE_STYLE_USAGE(.BOTH.,#515589); +#515589 = SURFACE_SIDE_STYLE('',(#515590)); +#515590 = SURFACE_STYLE_FILL_AREA(#515591); +#515591 = FILL_AREA_STYLE('',(#515592)); +#515592 = FILL_AREA_STYLE_COLOUR('',#515123); +#515593 = STYLED_ITEM('color',(#515594),#466431); +#515594 = PRESENTATION_STYLE_ASSIGNMENT((#515595)); +#515595 = SURFACE_STYLE_USAGE(.BOTH.,#515596); +#515596 = SURFACE_SIDE_STYLE('',(#515597)); +#515597 = SURFACE_STYLE_FILL_AREA(#515598); +#515598 = FILL_AREA_STYLE('',(#515599)); +#515599 = FILL_AREA_STYLE_COLOUR('',#515123); +#515600 = STYLED_ITEM('color',(#515601),#466588); +#515601 = PRESENTATION_STYLE_ASSIGNMENT((#515602)); +#515602 = SURFACE_STYLE_USAGE(.BOTH.,#515603); +#515603 = SURFACE_SIDE_STYLE('',(#515604)); +#515604 = SURFACE_STYLE_FILL_AREA(#515605); +#515605 = FILL_AREA_STYLE('',(#515606)); +#515606 = FILL_AREA_STYLE_COLOUR('',#515123); +#515607 = STYLED_ITEM('color',(#515608),#466638); +#515608 = PRESENTATION_STYLE_ASSIGNMENT((#515609)); +#515609 = SURFACE_STYLE_USAGE(.BOTH.,#515610); +#515610 = SURFACE_SIDE_STYLE('',(#515611)); +#515611 = SURFACE_STYLE_FILL_AREA(#515612); +#515612 = FILL_AREA_STYLE('',(#515613)); +#515613 = FILL_AREA_STYLE_COLOUR('',#515123); +#515614 = STYLED_ITEM('color',(#515615),#466688); +#515615 = PRESENTATION_STYLE_ASSIGNMENT((#515616)); +#515616 = SURFACE_STYLE_USAGE(.BOTH.,#515617); +#515617 = SURFACE_SIDE_STYLE('',(#515618)); +#515618 = SURFACE_STYLE_FILL_AREA(#515619); +#515619 = FILL_AREA_STYLE('',(#515620)); +#515620 = FILL_AREA_STYLE_COLOUR('',#515123); +#515621 = STYLED_ITEM('color',(#515622),#466770); +#515622 = PRESENTATION_STYLE_ASSIGNMENT((#515623)); +#515623 = SURFACE_STYLE_USAGE(.BOTH.,#515624); +#515624 = SURFACE_SIDE_STYLE('',(#515625)); +#515625 = SURFACE_STYLE_FILL_AREA(#515626); +#515626 = FILL_AREA_STYLE('',(#515627)); +#515627 = FILL_AREA_STYLE_COLOUR('',#515123); +#515628 = STYLED_ITEM('color',(#515629),#466944); +#515629 = PRESENTATION_STYLE_ASSIGNMENT((#515630)); +#515630 = SURFACE_STYLE_USAGE(.BOTH.,#515631); +#515631 = SURFACE_SIDE_STYLE('',(#515632)); +#515632 = SURFACE_STYLE_FILL_AREA(#515633); +#515633 = FILL_AREA_STYLE('',(#515634)); +#515634 = FILL_AREA_STYLE_COLOUR('',#515123); +#515635 = STYLED_ITEM('color',(#515636),#467058); +#515636 = PRESENTATION_STYLE_ASSIGNMENT((#515637)); +#515637 = SURFACE_STYLE_USAGE(.BOTH.,#515638); +#515638 = SURFACE_SIDE_STYLE('',(#515639)); +#515639 = SURFACE_STYLE_FILL_AREA(#515640); +#515640 = FILL_AREA_STYLE('',(#515641)); +#515641 = FILL_AREA_STYLE_COLOUR('',#515123); +#515642 = STYLED_ITEM('color',(#515643),#467215); +#515643 = PRESENTATION_STYLE_ASSIGNMENT((#515644)); +#515644 = SURFACE_STYLE_USAGE(.BOTH.,#515645); +#515645 = SURFACE_SIDE_STYLE('',(#515646)); +#515646 = SURFACE_STYLE_FILL_AREA(#515647); +#515647 = FILL_AREA_STYLE('',(#515648)); +#515648 = FILL_AREA_STYLE_COLOUR('',#515123); +#515649 = STYLED_ITEM('color',(#515650),#467728); +#515650 = PRESENTATION_STYLE_ASSIGNMENT((#515651)); +#515651 = SURFACE_STYLE_USAGE(.BOTH.,#515652); +#515652 = SURFACE_SIDE_STYLE('',(#515653)); +#515653 = SURFACE_STYLE_FILL_AREA(#515654); +#515654 = FILL_AREA_STYLE('',(#515655)); +#515655 = FILL_AREA_STYLE_COLOUR('',#515123); +#515656 = STYLED_ITEM('color',(#515657),#467778); +#515657 = PRESENTATION_STYLE_ASSIGNMENT((#515658)); +#515658 = SURFACE_STYLE_USAGE(.BOTH.,#515659); +#515659 = SURFACE_SIDE_STYLE('',(#515660)); +#515660 = SURFACE_STYLE_FILL_AREA(#515661); +#515661 = FILL_AREA_STYLE('',(#515662)); +#515662 = FILL_AREA_STYLE_COLOUR('',#515123); +#515663 = STYLED_ITEM('color',(#515664),#467828); +#515664 = PRESENTATION_STYLE_ASSIGNMENT((#515665)); +#515665 = SURFACE_STYLE_USAGE(.BOTH.,#515666); +#515666 = SURFACE_SIDE_STYLE('',(#515667)); +#515667 = SURFACE_STYLE_FILL_AREA(#515668); +#515668 = FILL_AREA_STYLE('',(#515669)); +#515669 = FILL_AREA_STYLE_COLOUR('',#515123); +#515670 = STYLED_ITEM('color',(#515671),#468202); +#515671 = PRESENTATION_STYLE_ASSIGNMENT((#515672)); +#515672 = SURFACE_STYLE_USAGE(.BOTH.,#515673); +#515673 = SURFACE_SIDE_STYLE('',(#515674)); +#515674 = SURFACE_STYLE_FILL_AREA(#515675); +#515675 = FILL_AREA_STYLE('',(#515676)); +#515676 = FILL_AREA_STYLE_COLOUR('',#515123); +#515677 = STYLED_ITEM('color',(#515678),#468268); +#515678 = PRESENTATION_STYLE_ASSIGNMENT((#515679)); +#515679 = SURFACE_STYLE_USAGE(.BOTH.,#515680); +#515680 = SURFACE_SIDE_STYLE('',(#515681)); +#515681 = SURFACE_STYLE_FILL_AREA(#515682); +#515682 = FILL_AREA_STYLE('',(#515683)); +#515683 = FILL_AREA_STYLE_COLOUR('',#515123); +#515684 = STYLED_ITEM('color',(#515685),#468548); +#515685 = PRESENTATION_STYLE_ASSIGNMENT((#515686)); +#515686 = SURFACE_STYLE_USAGE(.BOTH.,#515687); +#515687 = SURFACE_SIDE_STYLE('',(#515688)); +#515688 = SURFACE_STYLE_FILL_AREA(#515689); +#515689 = FILL_AREA_STYLE('',(#515690)); +#515690 = FILL_AREA_STYLE_COLOUR('',#515123); +#515691 = STYLED_ITEM('color',(#515692),#468598); +#515692 = PRESENTATION_STYLE_ASSIGNMENT((#515693)); +#515693 = SURFACE_STYLE_USAGE(.BOTH.,#515694); +#515694 = SURFACE_SIDE_STYLE('',(#515695)); +#515695 = SURFACE_STYLE_FILL_AREA(#515696); +#515696 = FILL_AREA_STYLE('',(#515697)); +#515697 = FILL_AREA_STYLE_COLOUR('',#515123); +#515698 = STYLED_ITEM('color',(#515699),#468648); +#515699 = PRESENTATION_STYLE_ASSIGNMENT((#515700)); +#515700 = SURFACE_STYLE_USAGE(.BOTH.,#515701); +#515701 = SURFACE_SIDE_STYLE('',(#515702)); +#515702 = SURFACE_STYLE_FILL_AREA(#515703); +#515703 = FILL_AREA_STYLE('',(#515704)); +#515704 = FILL_AREA_STYLE_COLOUR('',#515123); +#515705 = STYLED_ITEM('color',(#515706),#468698); +#515706 = PRESENTATION_STYLE_ASSIGNMENT((#515707)); +#515707 = SURFACE_STYLE_USAGE(.BOTH.,#515708); +#515708 = SURFACE_SIDE_STYLE('',(#515709)); +#515709 = SURFACE_STYLE_FILL_AREA(#515710); +#515710 = FILL_AREA_STYLE('',(#515711)); +#515711 = FILL_AREA_STYLE_COLOUR('',#515123); +#515712 = STYLED_ITEM('color',(#515713),#468906); +#515713 = PRESENTATION_STYLE_ASSIGNMENT((#515714)); +#515714 = SURFACE_STYLE_USAGE(.BOTH.,#515715); +#515715 = SURFACE_SIDE_STYLE('',(#515716)); +#515716 = SURFACE_STYLE_FILL_AREA(#515717); +#515717 = FILL_AREA_STYLE('',(#515718)); +#515718 = FILL_AREA_STYLE_COLOUR('',#515123); +#515719 = STYLED_ITEM('color',(#515720),#468956); +#515720 = PRESENTATION_STYLE_ASSIGNMENT((#515721)); +#515721 = SURFACE_STYLE_USAGE(.BOTH.,#515722); +#515722 = SURFACE_SIDE_STYLE('',(#515723)); +#515723 = SURFACE_STYLE_FILL_AREA(#515724); +#515724 = FILL_AREA_STYLE('',(#515725)); +#515725 = FILL_AREA_STYLE_COLOUR('',#515123); +#515726 = STYLED_ITEM('color',(#515727),#469102); +#515727 = PRESENTATION_STYLE_ASSIGNMENT((#515728)); +#515728 = SURFACE_STYLE_USAGE(.BOTH.,#515729); +#515729 = SURFACE_SIDE_STYLE('',(#515730)); +#515730 = SURFACE_STYLE_FILL_AREA(#515731); +#515731 = FILL_AREA_STYLE('',(#515732)); +#515732 = FILL_AREA_STYLE_COLOUR('',#515123); +#515733 = STYLED_ITEM('color',(#515734),#469152); +#515734 = PRESENTATION_STYLE_ASSIGNMENT((#515735)); +#515735 = SURFACE_STYLE_USAGE(.BOTH.,#515736); +#515736 = SURFACE_SIDE_STYLE('',(#515737)); +#515737 = SURFACE_STYLE_FILL_AREA(#515738); +#515738 = FILL_AREA_STYLE('',(#515739)); +#515739 = FILL_AREA_STYLE_COLOUR('',#515123); +#515740 = STYLED_ITEM('color',(#515741),#469594); +#515741 = PRESENTATION_STYLE_ASSIGNMENT((#515742)); +#515742 = SURFACE_STYLE_USAGE(.BOTH.,#515743); +#515743 = SURFACE_SIDE_STYLE('',(#515744)); +#515744 = SURFACE_STYLE_FILL_AREA(#515745); +#515745 = FILL_AREA_STYLE('',(#515746)); +#515746 = FILL_AREA_STYLE_COLOUR('',#515123); +#515747 = STYLED_ITEM('color',(#515748),#469644); +#515748 = PRESENTATION_STYLE_ASSIGNMENT((#515749)); +#515749 = SURFACE_STYLE_USAGE(.BOTH.,#515750); +#515750 = SURFACE_SIDE_STYLE('',(#515751)); +#515751 = SURFACE_STYLE_FILL_AREA(#515752); +#515752 = FILL_AREA_STYLE('',(#515753)); +#515753 = FILL_AREA_STYLE_COLOUR('',#515123); +#515754 = STYLED_ITEM('color',(#515755),#469876); +#515755 = PRESENTATION_STYLE_ASSIGNMENT((#515756)); +#515756 = SURFACE_STYLE_USAGE(.BOTH.,#515757); +#515757 = SURFACE_SIDE_STYLE('',(#515758)); +#515758 = SURFACE_STYLE_FILL_AREA(#515759); +#515759 = FILL_AREA_STYLE('',(#515760)); +#515760 = FILL_AREA_STYLE_COLOUR('',#515123); +#515761 = STYLED_ITEM('color',(#515762),#469926); +#515762 = PRESENTATION_STYLE_ASSIGNMENT((#515763)); +#515763 = SURFACE_STYLE_USAGE(.BOTH.,#515764); +#515764 = SURFACE_SIDE_STYLE('',(#515765)); +#515765 = SURFACE_STYLE_FILL_AREA(#515766); +#515766 = FILL_AREA_STYLE('',(#515767)); +#515767 = FILL_AREA_STYLE_COLOUR('',#515123); +#515768 = STYLED_ITEM('color',(#515769),#469976); +#515769 = PRESENTATION_STYLE_ASSIGNMENT((#515770)); +#515770 = SURFACE_STYLE_USAGE(.BOTH.,#515771); +#515771 = SURFACE_SIDE_STYLE('',(#515772)); +#515772 = SURFACE_STYLE_FILL_AREA(#515773); +#515773 = FILL_AREA_STYLE('',(#515774)); +#515774 = FILL_AREA_STYLE_COLOUR('',#515123); +#515775 = STYLED_ITEM('color',(#515776),#470109); +#515776 = PRESENTATION_STYLE_ASSIGNMENT((#515777)); +#515777 = SURFACE_STYLE_USAGE(.BOTH.,#515778); +#515778 = SURFACE_SIDE_STYLE('',(#515779)); +#515779 = SURFACE_STYLE_FILL_AREA(#515780); +#515780 = FILL_AREA_STYLE('',(#515781)); +#515781 = FILL_AREA_STYLE_COLOUR('',#515123); +#515782 = STYLED_ITEM('color',(#515783),#470159); +#515783 = PRESENTATION_STYLE_ASSIGNMENT((#515784)); +#515784 = SURFACE_STYLE_USAGE(.BOTH.,#515785); +#515785 = SURFACE_SIDE_STYLE('',(#515786)); +#515786 = SURFACE_STYLE_FILL_AREA(#515787); +#515787 = FILL_AREA_STYLE('',(#515788)); +#515788 = FILL_AREA_STYLE_COLOUR('',#515123); +#515789 = STYLED_ITEM('color',(#515790),#470235); +#515790 = PRESENTATION_STYLE_ASSIGNMENT((#515791)); +#515791 = SURFACE_STYLE_USAGE(.BOTH.,#515792); +#515792 = SURFACE_SIDE_STYLE('',(#515793)); +#515793 = SURFACE_STYLE_FILL_AREA(#515794); +#515794 = FILL_AREA_STYLE('',(#515795)); +#515795 = FILL_AREA_STYLE_COLOUR('',#515123); +#515796 = STYLED_ITEM('color',(#515797),#470285); +#515797 = PRESENTATION_STYLE_ASSIGNMENT((#515798)); +#515798 = SURFACE_STYLE_USAGE(.BOTH.,#515799); +#515799 = SURFACE_SIDE_STYLE('',(#515800)); +#515800 = SURFACE_STYLE_FILL_AREA(#515801); +#515801 = FILL_AREA_STYLE('',(#515802)); +#515802 = FILL_AREA_STYLE_COLOUR('',#515123); +#515803 = STYLED_ITEM('color',(#515804),#470361); +#515804 = PRESENTATION_STYLE_ASSIGNMENT((#515805)); +#515805 = SURFACE_STYLE_USAGE(.BOTH.,#515806); +#515806 = SURFACE_SIDE_STYLE('',(#515807)); +#515807 = SURFACE_STYLE_FILL_AREA(#515808); +#515808 = FILL_AREA_STYLE('',(#515809)); +#515809 = FILL_AREA_STYLE_COLOUR('',#515123); +#515810 = STYLED_ITEM('color',(#515811),#470411); +#515811 = PRESENTATION_STYLE_ASSIGNMENT((#515812)); +#515812 = SURFACE_STYLE_USAGE(.BOTH.,#515813); +#515813 = SURFACE_SIDE_STYLE('',(#515814)); +#515814 = SURFACE_STYLE_FILL_AREA(#515815); +#515815 = FILL_AREA_STYLE('',(#515816)); +#515816 = FILL_AREA_STYLE_COLOUR('',#515123); +#515817 = STYLED_ITEM('color',(#515818),#470573); +#515818 = PRESENTATION_STYLE_ASSIGNMENT((#515819)); +#515819 = SURFACE_STYLE_USAGE(.BOTH.,#515820); +#515820 = SURFACE_SIDE_STYLE('',(#515821)); +#515821 = SURFACE_STYLE_FILL_AREA(#515822); +#515822 = FILL_AREA_STYLE('',(#515823)); +#515823 = FILL_AREA_STYLE_COLOUR('',#515123); +#515824 = STYLED_ITEM('color',(#515825),#470766); +#515825 = PRESENTATION_STYLE_ASSIGNMENT((#515826)); +#515826 = SURFACE_STYLE_USAGE(.BOTH.,#515827); +#515827 = SURFACE_SIDE_STYLE('',(#515828)); +#515828 = SURFACE_STYLE_FILL_AREA(#515829); +#515829 = FILL_AREA_STYLE('',(#515830)); +#515830 = FILL_AREA_STYLE_COLOUR('',#515123); +#515831 = STYLED_ITEM('color',(#515832),#470810); +#515832 = PRESENTATION_STYLE_ASSIGNMENT((#515833)); +#515833 = SURFACE_STYLE_USAGE(.BOTH.,#515834); +#515834 = SURFACE_SIDE_STYLE('',(#515835)); +#515835 = SURFACE_STYLE_FILL_AREA(#515836); +#515836 = FILL_AREA_STYLE('',(#515837)); +#515837 = FILL_AREA_STYLE_COLOUR('',#515123); +#515838 = STYLED_ITEM('color',(#515839),#470920); +#515839 = PRESENTATION_STYLE_ASSIGNMENT((#515840)); +#515840 = SURFACE_STYLE_USAGE(.BOTH.,#515841); +#515841 = SURFACE_SIDE_STYLE('',(#515842)); +#515842 = SURFACE_STYLE_FILL_AREA(#515843); +#515843 = FILL_AREA_STYLE('',(#515844)); +#515844 = FILL_AREA_STYLE_COLOUR('',#515123); +#515845 = STYLED_ITEM('color',(#515846),#471055); +#515846 = PRESENTATION_STYLE_ASSIGNMENT((#515847)); +#515847 = SURFACE_STYLE_USAGE(.BOTH.,#515848); +#515848 = SURFACE_SIDE_STYLE('',(#515849)); +#515849 = SURFACE_STYLE_FILL_AREA(#515850); +#515850 = FILL_AREA_STYLE('',(#515851)); +#515851 = FILL_AREA_STYLE_COLOUR('',#515123); +#515852 = STYLED_ITEM('color',(#515853),#471099); +#515853 = PRESENTATION_STYLE_ASSIGNMENT((#515854)); +#515854 = SURFACE_STYLE_USAGE(.BOTH.,#515855); +#515855 = SURFACE_SIDE_STYLE('',(#515856)); +#515856 = SURFACE_STYLE_FILL_AREA(#515857); +#515857 = FILL_AREA_STYLE('',(#515858)); +#515858 = FILL_AREA_STYLE_COLOUR('',#515123); +#515859 = STYLED_ITEM('color',(#515860),#471149); +#515860 = PRESENTATION_STYLE_ASSIGNMENT((#515861)); +#515861 = SURFACE_STYLE_USAGE(.BOTH.,#515862); +#515862 = SURFACE_SIDE_STYLE('',(#515863)); +#515863 = SURFACE_STYLE_FILL_AREA(#515864); +#515864 = FILL_AREA_STYLE('',(#515865)); +#515865 = FILL_AREA_STYLE_COLOUR('',#515123); +#515866 = STYLED_ITEM('color',(#515867),#471199); +#515867 = PRESENTATION_STYLE_ASSIGNMENT((#515868)); +#515868 = SURFACE_STYLE_USAGE(.BOTH.,#515869); +#515869 = SURFACE_SIDE_STYLE('',(#515870)); +#515870 = SURFACE_STYLE_FILL_AREA(#515871); +#515871 = FILL_AREA_STYLE('',(#515872)); +#515872 = FILL_AREA_STYLE_COLOUR('',#515123); +#515873 = STYLED_ITEM('color',(#515874),#471366); +#515874 = PRESENTATION_STYLE_ASSIGNMENT((#515875)); +#515875 = SURFACE_STYLE_USAGE(.BOTH.,#515876); +#515876 = SURFACE_SIDE_STYLE('',(#515877)); +#515877 = SURFACE_STYLE_FILL_AREA(#515878); +#515878 = FILL_AREA_STYLE('',(#515879)); +#515879 = FILL_AREA_STYLE_COLOUR('',#515123); +#515880 = STYLED_ITEM('color',(#515881),#471468); +#515881 = PRESENTATION_STYLE_ASSIGNMENT((#515882)); +#515882 = SURFACE_STYLE_USAGE(.BOTH.,#515883); +#515883 = SURFACE_SIDE_STYLE('',(#515884)); +#515884 = SURFACE_STYLE_FILL_AREA(#515885); +#515885 = FILL_AREA_STYLE('',(#515886)); +#515886 = FILL_AREA_STYLE_COLOUR('',#515123); +#515887 = STYLED_ITEM('color',(#515888),#471545); +#515888 = PRESENTATION_STYLE_ASSIGNMENT((#515889)); +#515889 = SURFACE_STYLE_USAGE(.BOTH.,#515890); +#515890 = SURFACE_SIDE_STYLE('',(#515891)); +#515891 = SURFACE_STYLE_FILL_AREA(#515892); +#515892 = FILL_AREA_STYLE('',(#515893)); +#515893 = FILL_AREA_STYLE_COLOUR('',#515123); +#515894 = STYLED_ITEM('color',(#515895),#471622); +#515895 = PRESENTATION_STYLE_ASSIGNMENT((#515896)); +#515896 = SURFACE_STYLE_USAGE(.BOTH.,#515897); +#515897 = SURFACE_SIDE_STYLE('',(#515898)); +#515898 = SURFACE_STYLE_FILL_AREA(#515899); +#515899 = FILL_AREA_STYLE('',(#515900)); +#515900 = FILL_AREA_STYLE_COLOUR('',#515123); +#515901 = STYLED_ITEM('color',(#515902),#471861); +#515902 = PRESENTATION_STYLE_ASSIGNMENT((#515903)); +#515903 = SURFACE_STYLE_USAGE(.BOTH.,#515904); +#515904 = SURFACE_SIDE_STYLE('',(#515905)); +#515905 = SURFACE_STYLE_FILL_AREA(#515906); +#515906 = FILL_AREA_STYLE('',(#515907)); +#515907 = FILL_AREA_STYLE_COLOUR('',#515123); +#515908 = STYLED_ITEM('color',(#515909),#471967); +#515909 = PRESENTATION_STYLE_ASSIGNMENT((#515910)); +#515910 = SURFACE_STYLE_USAGE(.BOTH.,#515911); +#515911 = SURFACE_SIDE_STYLE('',(#515912)); +#515912 = SURFACE_STYLE_FILL_AREA(#515913); +#515913 = FILL_AREA_STYLE('',(#515914)); +#515914 = FILL_AREA_STYLE_COLOUR('',#515123); +#515915 = STYLED_ITEM('color',(#515916),#472019); +#515916 = PRESENTATION_STYLE_ASSIGNMENT((#515917)); +#515917 = SURFACE_STYLE_USAGE(.BOTH.,#515918); +#515918 = SURFACE_SIDE_STYLE('',(#515919)); +#515919 = SURFACE_STYLE_FILL_AREA(#515920); +#515920 = FILL_AREA_STYLE('',(#515921)); +#515921 = FILL_AREA_STYLE_COLOUR('',#515123); +#515922 = STYLED_ITEM('color',(#515923),#472071); +#515923 = PRESENTATION_STYLE_ASSIGNMENT((#515924)); +#515924 = SURFACE_STYLE_USAGE(.BOTH.,#515925); +#515925 = SURFACE_SIDE_STYLE('',(#515926)); +#515926 = SURFACE_STYLE_FILL_AREA(#515927); +#515927 = FILL_AREA_STYLE('',(#515928)); +#515928 = FILL_AREA_STYLE_COLOUR('',#515123); +#515929 = STYLED_ITEM('color',(#515930),#472197); +#515930 = PRESENTATION_STYLE_ASSIGNMENT((#515931)); +#515931 = SURFACE_STYLE_USAGE(.BOTH.,#515932); +#515932 = SURFACE_SIDE_STYLE('',(#515933)); +#515933 = SURFACE_STYLE_FILL_AREA(#515934); +#515934 = FILL_AREA_STYLE('',(#515935)); +#515935 = FILL_AREA_STYLE_COLOUR('',#515123); +#515936 = STYLED_ITEM('color',(#515937),#472241); +#515937 = PRESENTATION_STYLE_ASSIGNMENT((#515938)); +#515938 = SURFACE_STYLE_USAGE(.BOTH.,#515939); +#515939 = SURFACE_SIDE_STYLE('',(#515940)); +#515940 = SURFACE_STYLE_FILL_AREA(#515941); +#515941 = FILL_AREA_STYLE('',(#515942)); +#515942 = FILL_AREA_STYLE_COLOUR('',#515123); +#515943 = STYLED_ITEM('color',(#515944),#472472); +#515944 = PRESENTATION_STYLE_ASSIGNMENT((#515945)); +#515945 = SURFACE_STYLE_USAGE(.BOTH.,#515946); +#515946 = SURFACE_SIDE_STYLE('',(#515947)); +#515947 = SURFACE_STYLE_FILL_AREA(#515948); +#515948 = FILL_AREA_STYLE('',(#515949)); +#515949 = FILL_AREA_STYLE_COLOUR('',#515123); +#515950 = STYLED_ITEM('color',(#515951),#472540); +#515951 = PRESENTATION_STYLE_ASSIGNMENT((#515952)); +#515952 = SURFACE_STYLE_USAGE(.BOTH.,#515953); +#515953 = SURFACE_SIDE_STYLE('',(#515954)); +#515954 = SURFACE_STYLE_FILL_AREA(#515955); +#515955 = FILL_AREA_STYLE('',(#515956)); +#515956 = FILL_AREA_STYLE_COLOUR('',#515123); +#515957 = STYLED_ITEM('color',(#515958),#472625); +#515958 = PRESENTATION_STYLE_ASSIGNMENT((#515959)); +#515959 = SURFACE_STYLE_USAGE(.BOTH.,#515960); +#515960 = SURFACE_SIDE_STYLE('',(#515961)); +#515961 = SURFACE_STYLE_FILL_AREA(#515962); +#515962 = FILL_AREA_STYLE('',(#515963)); +#515963 = FILL_AREA_STYLE_COLOUR('',#515123); +#515964 = STYLED_ITEM('color',(#515965),#472782); +#515965 = PRESENTATION_STYLE_ASSIGNMENT((#515966)); +#515966 = SURFACE_STYLE_USAGE(.BOTH.,#515967); +#515967 = SURFACE_SIDE_STYLE('',(#515968)); +#515968 = SURFACE_STYLE_FILL_AREA(#515969); +#515969 = FILL_AREA_STYLE('',(#515970)); +#515970 = FILL_AREA_STYLE_COLOUR('',#515123); +#515971 = STYLED_ITEM('color',(#515972),#472826); +#515972 = PRESENTATION_STYLE_ASSIGNMENT((#515973)); +#515973 = SURFACE_STYLE_USAGE(.BOTH.,#515974); +#515974 = SURFACE_SIDE_STYLE('',(#515975)); +#515975 = SURFACE_STYLE_FILL_AREA(#515976); +#515976 = FILL_AREA_STYLE('',(#515977)); +#515977 = FILL_AREA_STYLE_COLOUR('',#515123); +#515978 = STYLED_ITEM('color',(#515979),#472991); +#515979 = PRESENTATION_STYLE_ASSIGNMENT((#515980)); +#515980 = SURFACE_STYLE_USAGE(.BOTH.,#515981); +#515981 = SURFACE_SIDE_STYLE('',(#515982)); +#515982 = SURFACE_STYLE_FILL_AREA(#515983); +#515983 = FILL_AREA_STYLE('',(#515984)); +#515984 = FILL_AREA_STYLE_COLOUR('',#515123); +#515985 = STYLED_ITEM('color',(#515986),#473035); +#515986 = PRESENTATION_STYLE_ASSIGNMENT((#515987)); +#515987 = SURFACE_STYLE_USAGE(.BOTH.,#515988); +#515988 = SURFACE_SIDE_STYLE('',(#515989)); +#515989 = SURFACE_STYLE_FILL_AREA(#515990); +#515990 = FILL_AREA_STYLE('',(#515991)); +#515991 = FILL_AREA_STYLE_COLOUR('',#515123); +#515992 = STYLED_ITEM('color',(#515993),#473321); +#515993 = PRESENTATION_STYLE_ASSIGNMENT((#515994)); +#515994 = SURFACE_STYLE_USAGE(.BOTH.,#515995); +#515995 = SURFACE_SIDE_STYLE('',(#515996)); +#515996 = SURFACE_STYLE_FILL_AREA(#515997); +#515997 = FILL_AREA_STYLE('',(#515998)); +#515998 = FILL_AREA_STYLE_COLOUR('',#515123); +#515999 = STYLED_ITEM('color',(#516000),#473415); +#516000 = PRESENTATION_STYLE_ASSIGNMENT((#516001)); +#516001 = SURFACE_STYLE_USAGE(.BOTH.,#516002); +#516002 = SURFACE_SIDE_STYLE('',(#516003)); +#516003 = SURFACE_STYLE_FILL_AREA(#516004); +#516004 = FILL_AREA_STYLE('',(#516005)); +#516005 = FILL_AREA_STYLE_COLOUR('',#515123); +#516006 = STYLED_ITEM('color',(#516007),#473568); +#516007 = PRESENTATION_STYLE_ASSIGNMENT((#516008)); +#516008 = SURFACE_STYLE_USAGE(.BOTH.,#516009); +#516009 = SURFACE_SIDE_STYLE('',(#516010)); +#516010 = SURFACE_STYLE_FILL_AREA(#516011); +#516011 = FILL_AREA_STYLE('',(#516012)); +#516012 = FILL_AREA_STYLE_COLOUR('',#515123); +#516013 = STYLED_ITEM('color',(#516014),#473670); +#516014 = PRESENTATION_STYLE_ASSIGNMENT((#516015)); +#516015 = SURFACE_STYLE_USAGE(.BOTH.,#516016); +#516016 = SURFACE_SIDE_STYLE('',(#516017)); +#516017 = SURFACE_STYLE_FILL_AREA(#516018); +#516018 = FILL_AREA_STYLE('',(#516019)); +#516019 = FILL_AREA_STYLE_COLOUR('',#515123); +#516020 = STYLED_ITEM('color',(#516021),#473772); +#516021 = PRESENTATION_STYLE_ASSIGNMENT((#516022)); +#516022 = SURFACE_STYLE_USAGE(.BOTH.,#516023); +#516023 = SURFACE_SIDE_STYLE('',(#516024)); +#516024 = SURFACE_STYLE_FILL_AREA(#516025); +#516025 = FILL_AREA_STYLE('',(#516026)); +#516026 = FILL_AREA_STYLE_COLOUR('',#515123); +#516027 = STYLED_ITEM('color',(#516028),#474011); +#516028 = PRESENTATION_STYLE_ASSIGNMENT((#516029)); +#516029 = SURFACE_STYLE_USAGE(.BOTH.,#516030); +#516030 = SURFACE_SIDE_STYLE('',(#516031)); +#516031 = SURFACE_STYLE_FILL_AREA(#516032); +#516032 = FILL_AREA_STYLE('',(#516033)); +#516033 = FILL_AREA_STYLE_COLOUR('',#515123); +#516034 = STYLED_ITEM('color',(#516035),#474250); +#516035 = PRESENTATION_STYLE_ASSIGNMENT((#516036)); +#516036 = SURFACE_STYLE_USAGE(.BOTH.,#516037); +#516037 = SURFACE_SIDE_STYLE('',(#516038)); +#516038 = SURFACE_STYLE_FILL_AREA(#516039); +#516039 = FILL_AREA_STYLE('',(#516040)); +#516040 = FILL_AREA_STYLE_COLOUR('',#515123); +#516041 = STYLED_ITEM('color',(#516042),#474302); +#516042 = PRESENTATION_STYLE_ASSIGNMENT((#516043)); +#516043 = SURFACE_STYLE_USAGE(.BOTH.,#516044); +#516044 = SURFACE_SIDE_STYLE('',(#516045)); +#516045 = SURFACE_STYLE_FILL_AREA(#516046); +#516046 = FILL_AREA_STYLE('',(#516047)); +#516047 = FILL_AREA_STYLE_COLOUR('',#515123); +#516048 = STYLED_ITEM('color',(#516049),#474370); +#516049 = PRESENTATION_STYLE_ASSIGNMENT((#516050)); +#516050 = SURFACE_STYLE_USAGE(.BOTH.,#516051); +#516051 = SURFACE_SIDE_STYLE('',(#516052)); +#516052 = SURFACE_STYLE_FILL_AREA(#516053); +#516053 = FILL_AREA_STYLE('',(#516054)); +#516054 = FILL_AREA_STYLE_COLOUR('',#515123); +#516055 = STYLED_ITEM('color',(#516056),#474454); +#516056 = PRESENTATION_STYLE_ASSIGNMENT((#516057)); +#516057 = SURFACE_STYLE_USAGE(.BOTH.,#516058); +#516058 = SURFACE_SIDE_STYLE('',(#516059)); +#516059 = SURFACE_STYLE_FILL_AREA(#516060); +#516060 = FILL_AREA_STYLE('',(#516061)); +#516061 = FILL_AREA_STYLE_COLOUR('',#515123); +#516062 = STYLED_ITEM('color',(#516063),#474611); +#516063 = PRESENTATION_STYLE_ASSIGNMENT((#516064)); +#516064 = SURFACE_STYLE_USAGE(.BOTH.,#516065); +#516065 = SURFACE_SIDE_STYLE('',(#516066)); +#516066 = SURFACE_STYLE_FILL_AREA(#516067); +#516067 = FILL_AREA_STYLE('',(#516068)); +#516068 = FILL_AREA_STYLE_COLOUR('',#515123); +#516069 = STYLED_ITEM('color',(#516070),#474695); +#516070 = PRESENTATION_STYLE_ASSIGNMENT((#516071)); +#516071 = SURFACE_STYLE_USAGE(.BOTH.,#516072); +#516072 = SURFACE_SIDE_STYLE('',(#516073)); +#516073 = SURFACE_STYLE_FILL_AREA(#516074); +#516074 = FILL_AREA_STYLE('',(#516075)); +#516075 = FILL_AREA_STYLE_COLOUR('',#515123); +#516076 = STYLED_ITEM('color',(#516077),#474869); +#516077 = PRESENTATION_STYLE_ASSIGNMENT((#516078)); +#516078 = SURFACE_STYLE_USAGE(.BOTH.,#516079); +#516079 = SURFACE_SIDE_STYLE('',(#516080)); +#516080 = SURFACE_STYLE_FILL_AREA(#516081); +#516081 = FILL_AREA_STYLE('',(#516082)); +#516082 = FILL_AREA_STYLE_COLOUR('',#515123); +#516083 = STYLED_ITEM('color',(#516084),#474963); +#516084 = PRESENTATION_STYLE_ASSIGNMENT((#516085)); +#516085 = SURFACE_STYLE_USAGE(.BOTH.,#516086); +#516086 = SURFACE_SIDE_STYLE('',(#516087)); +#516087 = SURFACE_STYLE_FILL_AREA(#516088); +#516088 = FILL_AREA_STYLE('',(#516089)); +#516089 = FILL_AREA_STYLE_COLOUR('',#515123); +#516090 = STYLED_ITEM('color',(#516091),#475125); +#516091 = PRESENTATION_STYLE_ASSIGNMENT((#516092)); +#516092 = SURFACE_STYLE_USAGE(.BOTH.,#516093); +#516093 = SURFACE_SIDE_STYLE('',(#516094)); +#516094 = SURFACE_STYLE_FILL_AREA(#516095); +#516095 = FILL_AREA_STYLE('',(#516096)); +#516096 = FILL_AREA_STYLE_COLOUR('',#515123); +#516097 = STYLED_ITEM('color',(#516098),#475169); +#516098 = PRESENTATION_STYLE_ASSIGNMENT((#516099)); +#516099 = SURFACE_STYLE_USAGE(.BOTH.,#516100); +#516100 = SURFACE_SIDE_STYLE('',(#516101)); +#516101 = SURFACE_STYLE_FILL_AREA(#516102); +#516102 = FILL_AREA_STYLE('',(#516103)); +#516103 = FILL_AREA_STYLE_COLOUR('',#515123); +#516104 = STYLED_ITEM('color',(#516105),#475213); +#516105 = PRESENTATION_STYLE_ASSIGNMENT((#516106)); +#516106 = SURFACE_STYLE_USAGE(.BOTH.,#516107); +#516107 = SURFACE_SIDE_STYLE('',(#516108)); +#516108 = SURFACE_STYLE_FILL_AREA(#516109); +#516109 = FILL_AREA_STYLE('',(#516110)); +#516110 = FILL_AREA_STYLE_COLOUR('',#515123); +#516111 = STYLED_ITEM('color',(#516112),#475315); +#516112 = PRESENTATION_STYLE_ASSIGNMENT((#516113)); +#516113 = SURFACE_STYLE_USAGE(.BOTH.,#516114); +#516114 = SURFACE_SIDE_STYLE('',(#516115)); +#516115 = SURFACE_STYLE_FILL_AREA(#516116); +#516116 = FILL_AREA_STYLE('',(#516117)); +#516117 = FILL_AREA_STYLE_COLOUR('',#515123); +#516118 = STYLED_ITEM('color',(#516119),#475489); +#516119 = PRESENTATION_STYLE_ASSIGNMENT((#516120)); +#516120 = SURFACE_STYLE_USAGE(.BOTH.,#516121); +#516121 = SURFACE_SIDE_STYLE('',(#516122)); +#516122 = SURFACE_STYLE_FILL_AREA(#516123); +#516123 = FILL_AREA_STYLE('',(#516124)); +#516124 = FILL_AREA_STYLE_COLOUR('',#515123); +#516125 = STYLED_ITEM('color',(#516126),#475721); +#516126 = PRESENTATION_STYLE_ASSIGNMENT((#516127)); +#516127 = SURFACE_STYLE_USAGE(.BOTH.,#516128); +#516128 = SURFACE_SIDE_STYLE('',(#516129)); +#516129 = SURFACE_STYLE_FILL_AREA(#516130); +#516130 = FILL_AREA_STYLE('',(#516131)); +#516131 = FILL_AREA_STYLE_COLOUR('',#515123); +#516132 = STYLED_ITEM('color',(#516133),#475765); +#516133 = PRESENTATION_STYLE_ASSIGNMENT((#516134)); +#516134 = SURFACE_STYLE_USAGE(.BOTH.,#516135); +#516135 = SURFACE_SIDE_STYLE('',(#516136)); +#516136 = SURFACE_STYLE_FILL_AREA(#516137); +#516137 = FILL_AREA_STYLE('',(#516138)); +#516138 = FILL_AREA_STYLE_COLOUR('',#515123); +#516139 = STYLED_ITEM('color',(#516140),#475809); +#516140 = PRESENTATION_STYLE_ASSIGNMENT((#516141)); +#516141 = SURFACE_STYLE_USAGE(.BOTH.,#516142); +#516142 = SURFACE_SIDE_STYLE('',(#516143)); +#516143 = SURFACE_STYLE_FILL_AREA(#516144); +#516144 = FILL_AREA_STYLE('',(#516145)); +#516145 = FILL_AREA_STYLE_COLOUR('',#515123); +#516146 = STYLED_ITEM('color',(#516147),#475861); +#516147 = PRESENTATION_STYLE_ASSIGNMENT((#516148)); +#516148 = SURFACE_STYLE_USAGE(.BOTH.,#516149); +#516149 = SURFACE_SIDE_STYLE('',(#516150)); +#516150 = SURFACE_STYLE_FILL_AREA(#516151); +#516151 = FILL_AREA_STYLE('',(#516152)); +#516152 = FILL_AREA_STYLE_COLOUR('',#515123); +#516153 = STYLED_ITEM('color',(#516154),#475913); +#516154 = PRESENTATION_STYLE_ASSIGNMENT((#516155)); +#516155 = SURFACE_STYLE_USAGE(.BOTH.,#516156); +#516156 = SURFACE_SIDE_STYLE('',(#516157)); +#516157 = SURFACE_STYLE_FILL_AREA(#516158); +#516158 = FILL_AREA_STYLE('',(#516159)); +#516159 = FILL_AREA_STYLE_COLOUR('',#515123); +#516160 = STYLED_ITEM('color',(#516161),#476070); +#516161 = PRESENTATION_STYLE_ASSIGNMENT((#516162)); +#516162 = SURFACE_STYLE_USAGE(.BOTH.,#516163); +#516163 = SURFACE_SIDE_STYLE('',(#516164)); +#516164 = SURFACE_STYLE_FILL_AREA(#516165); +#516165 = FILL_AREA_STYLE('',(#516166)); +#516166 = FILL_AREA_STYLE_COLOUR('',#515123); +#516167 = STYLED_ITEM('color',(#516168),#476114); +#516168 = PRESENTATION_STYLE_ASSIGNMENT((#516169)); +#516169 = SURFACE_STYLE_USAGE(.BOTH.,#516170); +#516170 = SURFACE_SIDE_STYLE('',(#516171)); +#516171 = SURFACE_STYLE_FILL_AREA(#516172); +#516172 = FILL_AREA_STYLE('',(#516173)); +#516173 = FILL_AREA_STYLE_COLOUR('',#515123); +#516174 = STYLED_ITEM('color',(#516175),#476216); +#516175 = PRESENTATION_STYLE_ASSIGNMENT((#516176)); +#516176 = SURFACE_STYLE_USAGE(.BOTH.,#516177); +#516177 = SURFACE_SIDE_STYLE('',(#516178)); +#516178 = SURFACE_STYLE_FILL_AREA(#516179); +#516179 = FILL_AREA_STYLE('',(#516180)); +#516180 = FILL_AREA_STYLE_COLOUR('',#515123); +#516181 = STYLED_ITEM('color',(#516182),#476260); +#516182 = PRESENTATION_STYLE_ASSIGNMENT((#516183)); +#516183 = SURFACE_STYLE_USAGE(.BOTH.,#516184); +#516184 = SURFACE_SIDE_STYLE('',(#516185)); +#516185 = SURFACE_STYLE_FILL_AREA(#516186); +#516186 = FILL_AREA_STYLE('',(#516187)); +#516187 = FILL_AREA_STYLE_COLOUR('',#515123); +#516188 = STYLED_ITEM('color',(#516189),#476422); +#516189 = PRESENTATION_STYLE_ASSIGNMENT((#516190)); +#516190 = SURFACE_STYLE_USAGE(.BOTH.,#516191); +#516191 = SURFACE_SIDE_STYLE('',(#516192)); +#516192 = SURFACE_STYLE_FILL_AREA(#516193); +#516193 = FILL_AREA_STYLE('',(#516194)); +#516194 = FILL_AREA_STYLE_COLOUR('',#515123); +#516195 = STYLED_ITEM('color',(#516196),#476524); +#516196 = PRESENTATION_STYLE_ASSIGNMENT((#516197)); +#516197 = SURFACE_STYLE_USAGE(.BOTH.,#516198); +#516198 = SURFACE_SIDE_STYLE('',(#516199)); +#516199 = SURFACE_STYLE_FILL_AREA(#516200); +#516200 = FILL_AREA_STYLE('',(#516201)); +#516201 = FILL_AREA_STYLE_COLOUR('',#515123); +#516202 = STYLED_ITEM('color',(#516203),#476686); +#516203 = PRESENTATION_STYLE_ASSIGNMENT((#516204)); +#516204 = SURFACE_STYLE_USAGE(.BOTH.,#516205); +#516205 = SURFACE_SIDE_STYLE('',(#516206)); +#516206 = SURFACE_STYLE_FILL_AREA(#516207); +#516207 = FILL_AREA_STYLE('',(#516208)); +#516208 = FILL_AREA_STYLE_COLOUR('',#515123); +#516209 = STYLED_ITEM('color',(#516210),#476730); +#516210 = PRESENTATION_STYLE_ASSIGNMENT((#516211)); +#516211 = SURFACE_STYLE_USAGE(.BOTH.,#516212); +#516212 = SURFACE_SIDE_STYLE('',(#516213)); +#516213 = SURFACE_STYLE_FILL_AREA(#516214); +#516214 = FILL_AREA_STYLE('',(#516215)); +#516215 = FILL_AREA_STYLE_COLOUR('',#515123); +#516216 = STYLED_ITEM('color',(#516217),#476905); +#516217 = PRESENTATION_STYLE_ASSIGNMENT((#516218)); +#516218 = SURFACE_STYLE_USAGE(.BOTH.,#516219); +#516219 = SURFACE_SIDE_STYLE('',(#516220)); +#516220 = SURFACE_STYLE_FILL_AREA(#516221); +#516221 = FILL_AREA_STYLE('',(#516222)); +#516222 = FILL_AREA_STYLE_COLOUR('',#515123); +#516223 = STYLED_ITEM('color',(#516224),#476949); +#516224 = PRESENTATION_STYLE_ASSIGNMENT((#516225)); +#516225 = SURFACE_STYLE_USAGE(.BOTH.,#516226); +#516226 = SURFACE_SIDE_STYLE('',(#516227)); +#516227 = SURFACE_STYLE_FILL_AREA(#516228); +#516228 = FILL_AREA_STYLE('',(#516229)); +#516229 = FILL_AREA_STYLE_COLOUR('',#515123); +#516230 = STYLED_ITEM('color',(#516231),#477001); +#516231 = PRESENTATION_STYLE_ASSIGNMENT((#516232)); +#516232 = SURFACE_STYLE_USAGE(.BOTH.,#516233); +#516233 = SURFACE_SIDE_STYLE('',(#516234)); +#516234 = SURFACE_STYLE_FILL_AREA(#516235); +#516235 = FILL_AREA_STYLE('',(#516236)); +#516236 = FILL_AREA_STYLE_COLOUR('',#515123); +#516237 = STYLED_ITEM('color',(#516238),#477069); +#516238 = PRESENTATION_STYLE_ASSIGNMENT((#516239)); +#516239 = SURFACE_STYLE_USAGE(.BOTH.,#516240); +#516240 = SURFACE_SIDE_STYLE('',(#516241)); +#516241 = SURFACE_STYLE_FILL_AREA(#516242); +#516242 = FILL_AREA_STYLE('',(#516243)); +#516243 = FILL_AREA_STYLE_COLOUR('',#515123); +#516244 = STYLED_ITEM('color',(#516245),#477314); +#516245 = PRESENTATION_STYLE_ASSIGNMENT((#516246)); +#516246 = SURFACE_STYLE_USAGE(.BOTH.,#516247); +#516247 = SURFACE_SIDE_STYLE('',(#516248)); +#516248 = SURFACE_STYLE_FILL_AREA(#516249); +#516249 = FILL_AREA_STYLE('',(#516250)); +#516250 = FILL_AREA_STYLE_COLOUR('',#515123); +#516251 = STYLED_ITEM('color',(#516252),#477372); +#516252 = PRESENTATION_STYLE_ASSIGNMENT((#516253)); +#516253 = SURFACE_STYLE_USAGE(.BOTH.,#516254); +#516254 = SURFACE_SIDE_STYLE('',(#516255)); +#516255 = SURFACE_STYLE_FILL_AREA(#516256); +#516256 = FILL_AREA_STYLE('',(#516257)); +#516257 = FILL_AREA_STYLE_COLOUR('',#515123); +#516258 = STYLED_ITEM('color',(#516259),#477416); +#516259 = PRESENTATION_STYLE_ASSIGNMENT((#516260)); +#516260 = SURFACE_STYLE_USAGE(.BOTH.,#516261); +#516261 = SURFACE_SIDE_STYLE('',(#516262)); +#516262 = SURFACE_STYLE_FILL_AREA(#516263); +#516263 = FILL_AREA_STYLE('',(#516264)); +#516264 = FILL_AREA_STYLE_COLOUR('',#515123); +#516265 = STYLED_ITEM('color',(#516266),#477460); +#516266 = PRESENTATION_STYLE_ASSIGNMENT((#516267)); +#516267 = SURFACE_STYLE_USAGE(.BOTH.,#516268); +#516268 = SURFACE_SIDE_STYLE('',(#516269)); +#516269 = SURFACE_STYLE_FILL_AREA(#516270); +#516270 = FILL_AREA_STYLE('',(#516271)); +#516271 = FILL_AREA_STYLE_COLOUR('',#515123); +#516272 = STYLED_ITEM('color',(#516273),#477566); +#516273 = PRESENTATION_STYLE_ASSIGNMENT((#516274)); +#516274 = SURFACE_STYLE_USAGE(.BOTH.,#516275); +#516275 = SURFACE_SIDE_STYLE('',(#516276)); +#516276 = SURFACE_STYLE_FILL_AREA(#516277); +#516277 = FILL_AREA_STYLE('',(#516278)); +#516278 = FILL_AREA_STYLE_COLOUR('',#515123); +#516279 = STYLED_ITEM('color',(#516280),#477660); +#516280 = PRESENTATION_STYLE_ASSIGNMENT((#516281)); +#516281 = SURFACE_STYLE_USAGE(.BOTH.,#516282); +#516282 = SURFACE_SIDE_STYLE('',(#516283)); +#516283 = SURFACE_STYLE_FILL_AREA(#516284); +#516284 = FILL_AREA_STYLE('',(#516285)); +#516285 = FILL_AREA_STYLE_COLOUR('',#515123); +#516286 = STYLED_ITEM('color',(#516287),#477712); +#516287 = PRESENTATION_STYLE_ASSIGNMENT((#516288)); +#516288 = SURFACE_STYLE_USAGE(.BOTH.,#516289); +#516289 = SURFACE_SIDE_STYLE('',(#516290)); +#516290 = SURFACE_STYLE_FILL_AREA(#516291); +#516291 = FILL_AREA_STYLE('',(#516292)); +#516292 = FILL_AREA_STYLE_COLOUR('',#515123); +#516293 = STYLED_ITEM('color',(#516294),#477764); +#516294 = PRESENTATION_STYLE_ASSIGNMENT((#516295)); +#516295 = SURFACE_STYLE_USAGE(.BOTH.,#516296); +#516296 = SURFACE_SIDE_STYLE('',(#516297)); +#516297 = SURFACE_STYLE_FILL_AREA(#516298); +#516298 = FILL_AREA_STYLE('',(#516299)); +#516299 = FILL_AREA_STYLE_COLOUR('',#515123); +#516300 = STYLED_ITEM('color',(#516301),#477808); +#516301 = PRESENTATION_STYLE_ASSIGNMENT((#516302)); +#516302 = SURFACE_STYLE_USAGE(.BOTH.,#516303); +#516303 = SURFACE_SIDE_STYLE('',(#516304)); +#516304 = SURFACE_STYLE_FILL_AREA(#516305); +#516305 = FILL_AREA_STYLE('',(#516306)); +#516306 = FILL_AREA_STYLE_COLOUR('',#515123); +#516307 = STYLED_ITEM('color',(#516308),#478001); +#516308 = PRESENTATION_STYLE_ASSIGNMENT((#516309)); +#516309 = SURFACE_STYLE_USAGE(.BOTH.,#516310); +#516310 = SURFACE_SIDE_STYLE('',(#516311)); +#516311 = SURFACE_STYLE_FILL_AREA(#516312); +#516312 = FILL_AREA_STYLE('',(#516313)); +#516313 = FILL_AREA_STYLE_COLOUR('',#515123); +#516314 = STYLED_ITEM('color',(#516315),#478045); +#516315 = PRESENTATION_STYLE_ASSIGNMENT((#516316)); +#516316 = SURFACE_STYLE_USAGE(.BOTH.,#516317); +#516317 = SURFACE_SIDE_STYLE('',(#516318)); +#516318 = SURFACE_STYLE_FILL_AREA(#516319); +#516319 = FILL_AREA_STYLE('',(#516320)); +#516320 = FILL_AREA_STYLE_COLOUR('',#515123); +#516321 = STYLED_ITEM('color',(#516322),#478089); +#516322 = PRESENTATION_STYLE_ASSIGNMENT((#516323)); +#516323 = SURFACE_STYLE_USAGE(.BOTH.,#516324); +#516324 = SURFACE_SIDE_STYLE('',(#516325)); +#516325 = SURFACE_STYLE_FILL_AREA(#516326); +#516326 = FILL_AREA_STYLE('',(#516327)); +#516327 = FILL_AREA_STYLE_COLOUR('',#515123); +#516328 = STYLED_ITEM('color',(#516329),#478375); +#516329 = PRESENTATION_STYLE_ASSIGNMENT((#516330)); +#516330 = SURFACE_STYLE_USAGE(.BOTH.,#516331); +#516331 = SURFACE_SIDE_STYLE('',(#516332)); +#516332 = SURFACE_STYLE_FILL_AREA(#516333); +#516333 = FILL_AREA_STYLE('',(#516334)); +#516334 = FILL_AREA_STYLE_COLOUR('',#515123); +#516335 = STYLED_ITEM('color',(#516336),#478540); +#516336 = PRESENTATION_STYLE_ASSIGNMENT((#516337)); +#516337 = SURFACE_STYLE_USAGE(.BOTH.,#516338); +#516338 = SURFACE_SIDE_STYLE('',(#516339)); +#516339 = SURFACE_STYLE_FILL_AREA(#516340); +#516340 = FILL_AREA_STYLE('',(#516341)); +#516341 = FILL_AREA_STYLE_COLOUR('',#515123); +#516342 = STYLED_ITEM('color',(#516343),#478584); +#516343 = PRESENTATION_STYLE_ASSIGNMENT((#516344)); +#516344 = SURFACE_STYLE_USAGE(.BOTH.,#516345); +#516345 = SURFACE_SIDE_STYLE('',(#516346)); +#516346 = SURFACE_STYLE_FILL_AREA(#516347); +#516347 = FILL_AREA_STYLE('',(#516348)); +#516348 = FILL_AREA_STYLE_COLOUR('',#515123); +#516349 = STYLED_ITEM('color',(#516350),#478777); +#516350 = PRESENTATION_STYLE_ASSIGNMENT((#516351)); +#516351 = SURFACE_STYLE_USAGE(.BOTH.,#516352); +#516352 = SURFACE_SIDE_STYLE('',(#516353)); +#516353 = SURFACE_STYLE_FILL_AREA(#516354); +#516354 = FILL_AREA_STYLE('',(#516355)); +#516355 = FILL_AREA_STYLE_COLOUR('',#515123); +#516356 = STYLED_ITEM('color',(#516357),#478829); +#516357 = PRESENTATION_STYLE_ASSIGNMENT((#516358)); +#516358 = SURFACE_STYLE_USAGE(.BOTH.,#516359); +#516359 = SURFACE_SIDE_STYLE('',(#516360)); +#516360 = SURFACE_STYLE_FILL_AREA(#516361); +#516361 = FILL_AREA_STYLE('',(#516362)); +#516362 = FILL_AREA_STYLE_COLOUR('',#515123); +#516363 = STYLED_ITEM('color',(#516364),#478881); +#516364 = PRESENTATION_STYLE_ASSIGNMENT((#516365)); +#516365 = SURFACE_STYLE_USAGE(.BOTH.,#516366); +#516366 = SURFACE_SIDE_STYLE('',(#516367)); +#516367 = SURFACE_STYLE_FILL_AREA(#516368); +#516368 = FILL_AREA_STYLE('',(#516369)); +#516369 = FILL_AREA_STYLE_COLOUR('',#515123); +#516370 = STYLED_ITEM('color',(#516371),#478983); +#516371 = PRESENTATION_STYLE_ASSIGNMENT((#516372)); +#516372 = SURFACE_STYLE_USAGE(.BOTH.,#516373); +#516373 = SURFACE_SIDE_STYLE('',(#516374)); +#516374 = SURFACE_STYLE_FILL_AREA(#516375); +#516375 = FILL_AREA_STYLE('',(#516376)); +#516376 = FILL_AREA_STYLE_COLOUR('',#515123); +#516377 = STYLED_ITEM('color',(#516378),#479002); +#516378 = PRESENTATION_STYLE_ASSIGNMENT((#516379)); +#516379 = SURFACE_STYLE_USAGE(.BOTH.,#516380); +#516380 = SURFACE_SIDE_STYLE('',(#516381)); +#516381 = SURFACE_STYLE_FILL_AREA(#516382); +#516382 = FILL_AREA_STYLE('',(#516383)); +#516383 = FILL_AREA_STYLE_COLOUR('',#515123); +#516384 = STYLED_ITEM('color',(#516385),#479159); +#516385 = PRESENTATION_STYLE_ASSIGNMENT((#516386)); +#516386 = SURFACE_STYLE_USAGE(.BOTH.,#516387); +#516387 = SURFACE_SIDE_STYLE('',(#516388)); +#516388 = SURFACE_STYLE_FILL_AREA(#516389); +#516389 = FILL_AREA_STYLE('',(#516390)); +#516390 = FILL_AREA_STYLE_COLOUR('',#515123); +#516391 = STYLED_ITEM('color',(#516392),#479250); +#516392 = PRESENTATION_STYLE_ASSIGNMENT((#516393)); +#516393 = SURFACE_STYLE_USAGE(.BOTH.,#516394); +#516394 = SURFACE_SIDE_STYLE('',(#516395)); +#516395 = SURFACE_STYLE_FILL_AREA(#516396); +#516396 = FILL_AREA_STYLE('',(#516397)); +#516397 = FILL_AREA_STYLE_COLOUR('',#515123); +#516398 = STYLED_ITEM('color',(#516399),#479294); +#516399 = PRESENTATION_STYLE_ASSIGNMENT((#516400)); +#516400 = SURFACE_STYLE_USAGE(.BOTH.,#516401); +#516401 = SURFACE_SIDE_STYLE('',(#516402)); +#516402 = SURFACE_STYLE_FILL_AREA(#516403); +#516403 = FILL_AREA_STYLE('',(#516404)); +#516404 = FILL_AREA_STYLE_COLOUR('',#515123); +#516405 = STYLED_ITEM('color',(#516406),#479338); +#516406 = PRESENTATION_STYLE_ASSIGNMENT((#516407)); +#516407 = SURFACE_STYLE_USAGE(.BOTH.,#516408); +#516408 = SURFACE_SIDE_STYLE('',(#516409)); +#516409 = SURFACE_STYLE_FILL_AREA(#516410); +#516410 = FILL_AREA_STYLE('',(#516411)); +#516411 = FILL_AREA_STYLE_COLOUR('',#515123); +#516412 = STYLED_ITEM('color',(#516413),#479390); +#516413 = PRESENTATION_STYLE_ASSIGNMENT((#516414)); +#516414 = SURFACE_STYLE_USAGE(.BOTH.,#516415); +#516415 = SURFACE_SIDE_STYLE('',(#516416)); +#516416 = SURFACE_STYLE_FILL_AREA(#516417); +#516417 = FILL_AREA_STYLE('',(#516418)); +#516418 = FILL_AREA_STYLE_COLOUR('',#515123); +#516419 = STYLED_ITEM('color',(#516420),#479442); +#516420 = PRESENTATION_STYLE_ASSIGNMENT((#516421)); +#516421 = SURFACE_STYLE_USAGE(.BOTH.,#516422); +#516422 = SURFACE_SIDE_STYLE('',(#516423)); +#516423 = SURFACE_STYLE_FILL_AREA(#516424); +#516424 = FILL_AREA_STYLE('',(#516425)); +#516425 = FILL_AREA_STYLE_COLOUR('',#515123); +#516426 = STYLED_ITEM('color',(#516427),#479616); +#516427 = PRESENTATION_STYLE_ASSIGNMENT((#516428)); +#516428 = SURFACE_STYLE_USAGE(.BOTH.,#516429); +#516429 = SURFACE_SIDE_STYLE('',(#516430)); +#516430 = SURFACE_STYLE_FILL_AREA(#516431); +#516431 = FILL_AREA_STYLE('',(#516432)); +#516432 = FILL_AREA_STYLE_COLOUR('',#515123); +#516433 = STYLED_ITEM('color',(#516434),#479668); +#516434 = PRESENTATION_STYLE_ASSIGNMENT((#516435)); +#516435 = SURFACE_STYLE_USAGE(.BOTH.,#516436); +#516436 = SURFACE_SIDE_STYLE('',(#516437)); +#516437 = SURFACE_STYLE_FILL_AREA(#516438); +#516438 = FILL_AREA_STYLE('',(#516439)); +#516439 = FILL_AREA_STYLE_COLOUR('',#515123); +#516440 = STYLED_ITEM('color',(#516441),#479736); +#516441 = PRESENTATION_STYLE_ASSIGNMENT((#516442)); +#516442 = SURFACE_STYLE_USAGE(.BOTH.,#516443); +#516443 = SURFACE_SIDE_STYLE('',(#516444)); +#516444 = SURFACE_STYLE_FILL_AREA(#516445); +#516445 = FILL_AREA_STYLE('',(#516446)); +#516446 = FILL_AREA_STYLE_COLOUR('',#515123); +#516447 = STYLED_ITEM('color',(#516448),#479893); +#516448 = PRESENTATION_STYLE_ASSIGNMENT((#516449)); +#516449 = SURFACE_STYLE_USAGE(.BOTH.,#516450); +#516450 = SURFACE_SIDE_STYLE('',(#516451)); +#516451 = SURFACE_STYLE_FILL_AREA(#516452); +#516452 = FILL_AREA_STYLE('',(#516453)); +#516453 = FILL_AREA_STYLE_COLOUR('',#515123); +#516454 = STYLED_ITEM('color',(#516455),#479937); +#516455 = PRESENTATION_STYLE_ASSIGNMENT((#516456)); +#516456 = SURFACE_STYLE_USAGE(.BOTH.,#516457); +#516457 = SURFACE_SIDE_STYLE('',(#516458)); +#516458 = SURFACE_STYLE_FILL_AREA(#516459); +#516459 = FILL_AREA_STYLE('',(#516460)); +#516460 = FILL_AREA_STYLE_COLOUR('',#515123); +#516461 = STYLED_ITEM('color',(#516462),#480028); +#516462 = PRESENTATION_STYLE_ASSIGNMENT((#516463)); +#516463 = SURFACE_STYLE_USAGE(.BOTH.,#516464); +#516464 = SURFACE_SIDE_STYLE('',(#516465)); +#516465 = SURFACE_STYLE_FILL_AREA(#516466); +#516466 = FILL_AREA_STYLE('',(#516467)); +#516467 = FILL_AREA_STYLE_COLOUR('',#515123); +#516468 = STYLED_ITEM('color',(#516469),#480072); +#516469 = PRESENTATION_STYLE_ASSIGNMENT((#516470)); +#516470 = SURFACE_STYLE_USAGE(.BOTH.,#516471); +#516471 = SURFACE_SIDE_STYLE('',(#516472)); +#516472 = SURFACE_STYLE_FILL_AREA(#516473); +#516473 = FILL_AREA_STYLE('',(#516474)); +#516474 = FILL_AREA_STYLE_COLOUR('',#515123); +#516475 = STYLED_ITEM('color',(#516476),#480166); +#516476 = PRESENTATION_STYLE_ASSIGNMENT((#516477)); +#516477 = SURFACE_STYLE_USAGE(.BOTH.,#516478); +#516478 = SURFACE_SIDE_STYLE('',(#516479)); +#516479 = SURFACE_STYLE_FILL_AREA(#516480); +#516480 = FILL_AREA_STYLE('',(#516481)); +#516481 = FILL_AREA_STYLE_COLOUR('',#515123); +#516482 = STYLED_ITEM('color',(#516483),#480484); +#516483 = PRESENTATION_STYLE_ASSIGNMENT((#516484)); +#516484 = SURFACE_STYLE_USAGE(.BOTH.,#516485); +#516485 = SURFACE_SIDE_STYLE('',(#516486)); +#516486 = SURFACE_STYLE_FILL_AREA(#516487); +#516487 = FILL_AREA_STYLE('',(#516488)); +#516488 = FILL_AREA_STYLE_COLOUR('',#515123); +#516489 = STYLED_ITEM('color',(#516490),#480780); +#516490 = PRESENTATION_STYLE_ASSIGNMENT((#516491)); +#516491 = SURFACE_STYLE_USAGE(.BOTH.,#516492); +#516492 = SURFACE_SIDE_STYLE('',(#516493)); +#516493 = SURFACE_STYLE_FILL_AREA(#516494); +#516494 = FILL_AREA_STYLE('',(#516495)); +#516495 = FILL_AREA_STYLE_COLOUR('',#515123); +#516496 = STYLED_ITEM('color',(#516497),#480824); +#516497 = PRESENTATION_STYLE_ASSIGNMENT((#516498)); +#516498 = SURFACE_STYLE_USAGE(.BOTH.,#516499); +#516499 = SURFACE_SIDE_STYLE('',(#516500)); +#516500 = SURFACE_STYLE_FILL_AREA(#516501); +#516501 = FILL_AREA_STYLE('',(#516502)); +#516502 = FILL_AREA_STYLE_COLOUR('',#515123); +#516503 = STYLED_ITEM('color',(#516504),#480876); +#516504 = PRESENTATION_STYLE_ASSIGNMENT((#516505)); +#516505 = SURFACE_STYLE_USAGE(.BOTH.,#516506); +#516506 = SURFACE_SIDE_STYLE('',(#516507)); +#516507 = SURFACE_STYLE_FILL_AREA(#516508); +#516508 = FILL_AREA_STYLE('',(#516509)); +#516509 = FILL_AREA_STYLE_COLOUR('',#515123); +#516510 = STYLED_ITEM('color',(#516511),#480928); +#516511 = PRESENTATION_STYLE_ASSIGNMENT((#516512)); +#516512 = SURFACE_STYLE_USAGE(.BOTH.,#516513); +#516513 = SURFACE_SIDE_STYLE('',(#516514)); +#516514 = SURFACE_STYLE_FILL_AREA(#516515); +#516515 = FILL_AREA_STYLE('',(#516516)); +#516516 = FILL_AREA_STYLE_COLOUR('',#515123); +#516517 = STYLED_ITEM('color',(#516518),#480972); +#516518 = PRESENTATION_STYLE_ASSIGNMENT((#516519)); +#516519 = SURFACE_STYLE_USAGE(.BOTH.,#516520); +#516520 = SURFACE_SIDE_STYLE('',(#516521)); +#516521 = SURFACE_STYLE_FILL_AREA(#516522); +#516522 = FILL_AREA_STYLE('',(#516523)); +#516523 = FILL_AREA_STYLE_COLOUR('',#515123); +#516524 = STYLED_ITEM('color',(#516525),#481024); +#516525 = PRESENTATION_STYLE_ASSIGNMENT((#516526)); +#516526 = SURFACE_STYLE_USAGE(.BOTH.,#516527); +#516527 = SURFACE_SIDE_STYLE('',(#516528)); +#516528 = SURFACE_STYLE_FILL_AREA(#516529); +#516529 = FILL_AREA_STYLE('',(#516530)); +#516530 = FILL_AREA_STYLE_COLOUR('',#515123); +#516531 = STYLED_ITEM('color',(#516532),#481076); +#516532 = PRESENTATION_STYLE_ASSIGNMENT((#516533)); +#516533 = SURFACE_STYLE_USAGE(.BOTH.,#516534); +#516534 = SURFACE_SIDE_STYLE('',(#516535)); +#516535 = SURFACE_STYLE_FILL_AREA(#516536); +#516536 = FILL_AREA_STYLE('',(#516537)); +#516537 = FILL_AREA_STYLE_COLOUR('',#515123); +#516538 = STYLED_ITEM('color',(#516539),#481120); +#516539 = PRESENTATION_STYLE_ASSIGNMENT((#516540)); +#516540 = SURFACE_STYLE_USAGE(.BOTH.,#516541); +#516541 = SURFACE_SIDE_STYLE('',(#516542)); +#516542 = SURFACE_STYLE_FILL_AREA(#516543); +#516543 = FILL_AREA_STYLE('',(#516544)); +#516544 = FILL_AREA_STYLE_COLOUR('',#515123); +#516545 = STYLED_ITEM('color',(#516546),#481172); +#516546 = PRESENTATION_STYLE_ASSIGNMENT((#516547)); +#516547 = SURFACE_STYLE_USAGE(.BOTH.,#516548); +#516548 = SURFACE_SIDE_STYLE('',(#516549)); +#516549 = SURFACE_STYLE_FILL_AREA(#516550); +#516550 = FILL_AREA_STYLE('',(#516551)); +#516551 = FILL_AREA_STYLE_COLOUR('',#515123); +#516552 = STYLED_ITEM('color',(#516553),#481224); +#516553 = PRESENTATION_STYLE_ASSIGNMENT((#516554)); +#516554 = SURFACE_STYLE_USAGE(.BOTH.,#516555); +#516555 = SURFACE_SIDE_STYLE('',(#516556)); +#516556 = SURFACE_STYLE_FILL_AREA(#516557); +#516557 = FILL_AREA_STYLE('',(#516558)); +#516558 = FILL_AREA_STYLE_COLOUR('',#515123); +#516559 = STYLED_ITEM('color',(#516560),#481301); +#516560 = PRESENTATION_STYLE_ASSIGNMENT((#516561)); +#516561 = SURFACE_STYLE_USAGE(.BOTH.,#516562); +#516562 = SURFACE_SIDE_STYLE('',(#516563)); +#516563 = SURFACE_STYLE_FILL_AREA(#516564); +#516564 = FILL_AREA_STYLE('',(#516565)); +#516565 = FILL_AREA_STYLE_COLOUR('',#515123); +#516566 = STYLED_ITEM('color',(#516567),#481378); +#516567 = PRESENTATION_STYLE_ASSIGNMENT((#516568)); +#516568 = SURFACE_STYLE_USAGE(.BOTH.,#516569); +#516569 = SURFACE_SIDE_STYLE('',(#516570)); +#516570 = SURFACE_STYLE_FILL_AREA(#516571); +#516571 = FILL_AREA_STYLE('',(#516572)); +#516572 = FILL_AREA_STYLE_COLOUR('',#515123); +#516573 = STYLED_ITEM('color',(#516574),#481446); +#516574 = PRESENTATION_STYLE_ASSIGNMENT((#516575)); +#516575 = SURFACE_STYLE_USAGE(.BOTH.,#516576); +#516576 = SURFACE_SIDE_STYLE('',(#516577)); +#516577 = SURFACE_STYLE_FILL_AREA(#516578); +#516578 = FILL_AREA_STYLE('',(#516579)); +#516579 = FILL_AREA_STYLE_COLOUR('',#515123); +#516580 = STYLED_ITEM('color',(#516581),#481498); +#516581 = PRESENTATION_STYLE_ASSIGNMENT((#516582)); +#516582 = SURFACE_STYLE_USAGE(.BOTH.,#516583); +#516583 = SURFACE_SIDE_STYLE('',(#516584)); +#516584 = SURFACE_STYLE_FILL_AREA(#516585); +#516585 = FILL_AREA_STYLE('',(#516586)); +#516586 = FILL_AREA_STYLE_COLOUR('',#515123); +#516587 = STYLED_ITEM('color',(#516588),#481550); +#516588 = PRESENTATION_STYLE_ASSIGNMENT((#516589)); +#516589 = SURFACE_STYLE_USAGE(.BOTH.,#516590); +#516590 = SURFACE_SIDE_STYLE('',(#516591)); +#516591 = SURFACE_STYLE_FILL_AREA(#516592); +#516592 = FILL_AREA_STYLE('',(#516593)); +#516593 = FILL_AREA_STYLE_COLOUR('',#515123); +#516594 = STYLED_ITEM('color',(#516595),#481667); +#516595 = PRESENTATION_STYLE_ASSIGNMENT((#516596)); +#516596 = SURFACE_STYLE_USAGE(.BOTH.,#516597); +#516597 = SURFACE_SIDE_STYLE('',(#516598)); +#516598 = SURFACE_STYLE_FILL_AREA(#516599); +#516599 = FILL_AREA_STYLE('',(#516600)); +#516600 = FILL_AREA_STYLE_COLOUR('',#515123); +#516601 = STYLED_ITEM('color',(#516602),#481769); +#516602 = PRESENTATION_STYLE_ASSIGNMENT((#516603)); +#516603 = SURFACE_STYLE_USAGE(.BOTH.,#516604); +#516604 = SURFACE_SIDE_STYLE('',(#516605)); +#516605 = SURFACE_STYLE_FILL_AREA(#516606); +#516606 = FILL_AREA_STYLE('',(#516607)); +#516607 = FILL_AREA_STYLE_COLOUR('',#515123); +#516608 = STYLED_ITEM('color',(#516609),#481838); +#516609 = PRESENTATION_STYLE_ASSIGNMENT((#516610)); +#516610 = SURFACE_STYLE_USAGE(.BOTH.,#516611); +#516611 = SURFACE_SIDE_STYLE('',(#516612)); +#516612 = SURFACE_STYLE_FILL_AREA(#516613); +#516613 = FILL_AREA_STYLE('',(#516614)); +#516614 = FILL_AREA_STYLE_COLOUR('',#515123); +#516615 = STYLED_ITEM('color',(#516616),#481907); +#516616 = PRESENTATION_STYLE_ASSIGNMENT((#516617)); +#516617 = SURFACE_STYLE_USAGE(.BOTH.,#516618); +#516618 = SURFACE_SIDE_STYLE('',(#516619)); +#516619 = SURFACE_STYLE_FILL_AREA(#516620); +#516620 = FILL_AREA_STYLE('',(#516621)); +#516621 = FILL_AREA_STYLE_COLOUR('',#515123); +#516622 = STYLED_ITEM('color',(#516623),#481951); +#516623 = PRESENTATION_STYLE_ASSIGNMENT((#516624)); +#516624 = SURFACE_STYLE_USAGE(.BOTH.,#516625); +#516625 = SURFACE_SIDE_STYLE('',(#516626)); +#516626 = SURFACE_STYLE_FILL_AREA(#516627); +#516627 = FILL_AREA_STYLE('',(#516628)); +#516628 = FILL_AREA_STYLE_COLOUR('',#515123); +#516629 = STYLED_ITEM('color',(#516630),#481995); +#516630 = PRESENTATION_STYLE_ASSIGNMENT((#516631)); +#516631 = SURFACE_STYLE_USAGE(.BOTH.,#516632); +#516632 = SURFACE_SIDE_STYLE('',(#516633)); +#516633 = SURFACE_STYLE_FILL_AREA(#516634); +#516634 = FILL_AREA_STYLE('',(#516635)); +#516635 = FILL_AREA_STYLE_COLOUR('',#515123); +#516636 = STYLED_ITEM('color',(#516637),#482039); +#516637 = PRESENTATION_STYLE_ASSIGNMENT((#516638)); +#516638 = SURFACE_STYLE_USAGE(.BOTH.,#516639); +#516639 = SURFACE_SIDE_STYLE('',(#516640)); +#516640 = SURFACE_STYLE_FILL_AREA(#516641); +#516641 = FILL_AREA_STYLE('',(#516642)); +#516642 = FILL_AREA_STYLE_COLOUR('',#515123); +#516643 = STYLED_ITEM('color',(#516644),#482628); +#516644 = PRESENTATION_STYLE_ASSIGNMENT((#516645)); +#516645 = SURFACE_STYLE_USAGE(.BOTH.,#516646); +#516646 = SURFACE_SIDE_STYLE('',(#516647)); +#516647 = SURFACE_STYLE_FILL_AREA(#516648); +#516648 = FILL_AREA_STYLE('',(#516649)); +#516649 = FILL_AREA_STYLE_COLOUR('',#515123); +#516650 = STYLED_ITEM('color',(#516651),#482740); +#516651 = PRESENTATION_STYLE_ASSIGNMENT((#516652)); +#516652 = SURFACE_STYLE_USAGE(.BOTH.,#516653); +#516653 = SURFACE_SIDE_STYLE('',(#516654)); +#516654 = SURFACE_STYLE_FILL_AREA(#516655); +#516655 = FILL_AREA_STYLE('',(#516656)); +#516656 = FILL_AREA_STYLE_COLOUR('',#515123); +#516657 = STYLED_ITEM('color',(#516658),#482784); +#516658 = PRESENTATION_STYLE_ASSIGNMENT((#516659)); +#516659 = SURFACE_STYLE_USAGE(.BOTH.,#516660); +#516660 = SURFACE_SIDE_STYLE('',(#516661)); +#516661 = SURFACE_STYLE_FILL_AREA(#516662); +#516662 = FILL_AREA_STYLE('',(#516663)); +#516663 = FILL_AREA_STYLE_COLOUR('',#515123); +#516664 = STYLED_ITEM('color',(#516665),#482828); +#516665 = PRESENTATION_STYLE_ASSIGNMENT((#516666)); +#516666 = SURFACE_STYLE_USAGE(.BOTH.,#516667); +#516667 = SURFACE_SIDE_STYLE('',(#516668)); +#516668 = SURFACE_STYLE_FILL_AREA(#516669); +#516669 = FILL_AREA_STYLE('',(#516670)); +#516670 = FILL_AREA_STYLE_COLOUR('',#515123); +#516671 = STYLED_ITEM('color',(#516672),#482905); +#516672 = PRESENTATION_STYLE_ASSIGNMENT((#516673)); +#516673 = SURFACE_STYLE_USAGE(.BOTH.,#516674); +#516674 = SURFACE_SIDE_STYLE('',(#516675)); +#516675 = SURFACE_STYLE_FILL_AREA(#516676); +#516676 = FILL_AREA_STYLE('',(#516677)); +#516677 = FILL_AREA_STYLE_COLOUR('',#515123); +#516678 = STYLED_ITEM('color',(#516679),#482982); +#516679 = PRESENTATION_STYLE_ASSIGNMENT((#516680)); +#516680 = SURFACE_STYLE_USAGE(.BOTH.,#516681); +#516681 = SURFACE_SIDE_STYLE('',(#516682)); +#516682 = SURFACE_STYLE_FILL_AREA(#516683); +#516683 = FILL_AREA_STYLE('',(#516684)); +#516684 = FILL_AREA_STYLE_COLOUR('',#515123); +#516685 = STYLED_ITEM('color',(#516686),#483262); +#516686 = PRESENTATION_STYLE_ASSIGNMENT((#516687)); +#516687 = SURFACE_STYLE_USAGE(.BOTH.,#516688); +#516688 = SURFACE_SIDE_STYLE('',(#516689)); +#516689 = SURFACE_STYLE_FILL_AREA(#516690); +#516690 = FILL_AREA_STYLE('',(#516691)); +#516691 = FILL_AREA_STYLE_COLOUR('',#515123); +#516692 = STYLED_ITEM('color',(#516693),#483314); +#516693 = PRESENTATION_STYLE_ASSIGNMENT((#516694)); +#516694 = SURFACE_STYLE_USAGE(.BOTH.,#516695); +#516695 = SURFACE_SIDE_STYLE('',(#516696)); +#516696 = SURFACE_STYLE_FILL_AREA(#516697); +#516697 = FILL_AREA_STYLE('',(#516698)); +#516698 = FILL_AREA_STYLE_COLOUR('',#515123); +#516699 = STYLED_ITEM('color',(#516700),#483366); +#516700 = PRESENTATION_STYLE_ASSIGNMENT((#516701)); +#516701 = SURFACE_STYLE_USAGE(.BOTH.,#516702); +#516702 = SURFACE_SIDE_STYLE('',(#516703)); +#516703 = SURFACE_STYLE_FILL_AREA(#516704); +#516704 = FILL_AREA_STYLE('',(#516705)); +#516705 = FILL_AREA_STYLE_COLOUR('',#515123); +#516706 = STYLED_ITEM('color',(#516707),#483418); +#516707 = PRESENTATION_STYLE_ASSIGNMENT((#516708)); +#516708 = SURFACE_STYLE_USAGE(.BOTH.,#516709); +#516709 = SURFACE_SIDE_STYLE('',(#516710)); +#516710 = SURFACE_STYLE_FILL_AREA(#516711); +#516711 = FILL_AREA_STYLE('',(#516712)); +#516712 = FILL_AREA_STYLE_COLOUR('',#515123); +#516713 = STYLED_ITEM('color',(#516714),#483470); +#516714 = PRESENTATION_STYLE_ASSIGNMENT((#516715)); +#516715 = SURFACE_STYLE_USAGE(.BOTH.,#516716); +#516716 = SURFACE_SIDE_STYLE('',(#516717)); +#516717 = SURFACE_STYLE_FILL_AREA(#516718); +#516718 = FILL_AREA_STYLE('',(#516719)); +#516719 = FILL_AREA_STYLE_COLOUR('',#515123); +#516720 = STYLED_ITEM('color',(#516721),#483538); +#516721 = PRESENTATION_STYLE_ASSIGNMENT((#516722)); +#516722 = SURFACE_STYLE_USAGE(.BOTH.,#516723); +#516723 = SURFACE_SIDE_STYLE('',(#516724)); +#516724 = SURFACE_STYLE_FILL_AREA(#516725); +#516725 = FILL_AREA_STYLE('',(#516726)); +#516726 = FILL_AREA_STYLE_COLOUR('',#515123); +#516727 = STYLED_ITEM('color',(#516728),#483607); +#516728 = PRESENTATION_STYLE_ASSIGNMENT((#516729)); +#516729 = SURFACE_STYLE_USAGE(.BOTH.,#516730); +#516730 = SURFACE_SIDE_STYLE('',(#516731)); +#516731 = SURFACE_STYLE_FILL_AREA(#516732); +#516732 = FILL_AREA_STYLE('',(#516733)); +#516733 = FILL_AREA_STYLE_COLOUR('',#515123); +#516734 = STYLED_ITEM('color',(#516735),#483676); +#516735 = PRESENTATION_STYLE_ASSIGNMENT((#516736)); +#516736 = SURFACE_STYLE_USAGE(.BOTH.,#516737); +#516737 = SURFACE_SIDE_STYLE('',(#516738)); +#516738 = SURFACE_STYLE_FILL_AREA(#516739); +#516739 = FILL_AREA_STYLE('',(#516740)); +#516740 = FILL_AREA_STYLE_COLOUR('',#515123); +#516741 = STYLED_ITEM('color',(#516742),#483728); +#516742 = PRESENTATION_STYLE_ASSIGNMENT((#516743)); +#516743 = SURFACE_STYLE_USAGE(.BOTH.,#516744); +#516744 = SURFACE_SIDE_STYLE('',(#516745)); +#516745 = SURFACE_STYLE_FILL_AREA(#516746); +#516746 = FILL_AREA_STYLE('',(#516747)); +#516747 = FILL_AREA_STYLE_COLOUR('',#515123); +#516748 = STYLED_ITEM('color',(#516749),#483780); +#516749 = PRESENTATION_STYLE_ASSIGNMENT((#516750)); +#516750 = SURFACE_STYLE_USAGE(.BOTH.,#516751); +#516751 = SURFACE_SIDE_STYLE('',(#516752)); +#516752 = SURFACE_STYLE_FILL_AREA(#516753); +#516753 = FILL_AREA_STYLE('',(#516754)); +#516754 = FILL_AREA_STYLE_COLOUR('',#515123); +#516755 = STYLED_ITEM('color',(#516756),#483882); +#516756 = PRESENTATION_STYLE_ASSIGNMENT((#516757)); +#516757 = SURFACE_STYLE_USAGE(.BOTH.,#516758); +#516758 = SURFACE_SIDE_STYLE('',(#516759)); +#516759 = SURFACE_STYLE_FILL_AREA(#516760); +#516760 = FILL_AREA_STYLE('',(#516761)); +#516761 = FILL_AREA_STYLE_COLOUR('',#515123); +#516762 = STYLED_ITEM('color',(#516763),#483934); +#516763 = PRESENTATION_STYLE_ASSIGNMENT((#516764)); +#516764 = SURFACE_STYLE_USAGE(.BOTH.,#516765); +#516765 = SURFACE_SIDE_STYLE('',(#516766)); +#516766 = SURFACE_STYLE_FILL_AREA(#516767); +#516767 = FILL_AREA_STYLE('',(#516768)); +#516768 = FILL_AREA_STYLE_COLOUR('',#515123); +#516769 = STYLED_ITEM('color',(#516770),#484002); +#516770 = PRESENTATION_STYLE_ASSIGNMENT((#516771)); +#516771 = SURFACE_STYLE_USAGE(.BOTH.,#516772); +#516772 = SURFACE_SIDE_STYLE('',(#516773)); +#516773 = SURFACE_STYLE_FILL_AREA(#516774); +#516774 = FILL_AREA_STYLE('',(#516775)); +#516775 = FILL_AREA_STYLE_COLOUR('',#515123); +#516776 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #516777,#516785,#516792,#516799,#516806,#516813,#516820,#516827, + #516834,#516841,#516848,#516855,#516862,#516869,#516876,#516883, + #516890,#516897,#516904,#516911,#516918,#516925,#516932,#516939, + #516946,#516953,#516960,#516967,#516974,#516981,#516988,#516995, + #517002,#517009,#517016,#517023,#517030,#517037,#517044,#517051, + #517058,#517065,#517072,#517079,#517086,#517093,#517100,#517107, + #517114,#517121,#517128,#517135,#517142,#517149,#517156,#517163, + #517170,#517177,#517184,#517191,#517198,#517205,#517212,#517219, + #517226,#517233,#517240,#517247,#517254,#517261,#517268,#517275, + #517282,#517289,#517296,#517303,#517310,#517317,#517324,#517331, + #517338,#517345,#517352,#517359,#517366,#517373,#517380,#517387, + #517394,#517401,#517408,#517415,#517422,#517429,#517436,#517443, + #517450,#517457,#517464,#517471,#517478,#517485,#517492,#517499, + #517506,#517513,#517520,#517527,#517534,#517541,#517548,#517555, + #517562,#517569,#517576,#517583,#517590,#517597,#517604,#517611, + #517618,#517625,#517632,#517639,#517646,#517653,#517660,#517667, + #517674,#517681),#429947); +#516777 = STYLED_ITEM('color',(#516778),#417987); +#516778 = PRESENTATION_STYLE_ASSIGNMENT((#516779)); +#516779 = SURFACE_STYLE_USAGE(.BOTH.,#516780); +#516780 = SURFACE_SIDE_STYLE('',(#516781)); +#516781 = SURFACE_STYLE_FILL_AREA(#516782); +#516782 = FILL_AREA_STYLE('',(#516783)); +#516783 = FILL_AREA_STYLE_COLOUR('',#516784); +#516784 = COLOUR_RGB('',0.854305825093,0.803630995277,0.); +#516785 = STYLED_ITEM('color',(#516786),#418079); +#516786 = PRESENTATION_STYLE_ASSIGNMENT((#516787)); +#516787 = SURFACE_STYLE_USAGE(.BOTH.,#516788); +#516788 = SURFACE_SIDE_STYLE('',(#516789)); +#516789 = SURFACE_STYLE_FILL_AREA(#516790); +#516790 = FILL_AREA_STYLE('',(#516791)); +#516791 = FILL_AREA_STYLE_COLOUR('',#516784); +#516792 = STYLED_ITEM('color',(#516793),#418171); +#516793 = PRESENTATION_STYLE_ASSIGNMENT((#516794)); +#516794 = SURFACE_STYLE_USAGE(.BOTH.,#516795); +#516795 = SURFACE_SIDE_STYLE('',(#516796)); +#516796 = SURFACE_STYLE_FILL_AREA(#516797); +#516797 = FILL_AREA_STYLE('',(#516798)); +#516798 = FILL_AREA_STYLE_COLOUR('',#516784); +#516799 = STYLED_ITEM('color',(#516800),#418263); +#516800 = PRESENTATION_STYLE_ASSIGNMENT((#516801)); +#516801 = SURFACE_STYLE_USAGE(.BOTH.,#516802); +#516802 = SURFACE_SIDE_STYLE('',(#516803)); +#516803 = SURFACE_STYLE_FILL_AREA(#516804); +#516804 = FILL_AREA_STYLE('',(#516805)); +#516805 = FILL_AREA_STYLE_COLOUR('',#516784); +#516806 = STYLED_ITEM('color',(#516807),#418355); +#516807 = PRESENTATION_STYLE_ASSIGNMENT((#516808)); +#516808 = SURFACE_STYLE_USAGE(.BOTH.,#516809); +#516809 = SURFACE_SIDE_STYLE('',(#516810)); +#516810 = SURFACE_STYLE_FILL_AREA(#516811); +#516811 = FILL_AREA_STYLE('',(#516812)); +#516812 = FILL_AREA_STYLE_COLOUR('',#516784); +#516813 = STYLED_ITEM('color',(#516814),#418447); +#516814 = PRESENTATION_STYLE_ASSIGNMENT((#516815)); +#516815 = SURFACE_STYLE_USAGE(.BOTH.,#516816); +#516816 = SURFACE_SIDE_STYLE('',(#516817)); +#516817 = SURFACE_STYLE_FILL_AREA(#516818); +#516818 = FILL_AREA_STYLE('',(#516819)); +#516819 = FILL_AREA_STYLE_COLOUR('',#516784); +#516820 = STYLED_ITEM('color',(#516821),#418539); +#516821 = PRESENTATION_STYLE_ASSIGNMENT((#516822)); +#516822 = SURFACE_STYLE_USAGE(.BOTH.,#516823); +#516823 = SURFACE_SIDE_STYLE('',(#516824)); +#516824 = SURFACE_STYLE_FILL_AREA(#516825); +#516825 = FILL_AREA_STYLE('',(#516826)); +#516826 = FILL_AREA_STYLE_COLOUR('',#516784); +#516827 = STYLED_ITEM('color',(#516828),#418631); +#516828 = PRESENTATION_STYLE_ASSIGNMENT((#516829)); +#516829 = SURFACE_STYLE_USAGE(.BOTH.,#516830); +#516830 = SURFACE_SIDE_STYLE('',(#516831)); +#516831 = SURFACE_STYLE_FILL_AREA(#516832); +#516832 = FILL_AREA_STYLE('',(#516833)); +#516833 = FILL_AREA_STYLE_COLOUR('',#516784); +#516834 = STYLED_ITEM('color',(#516835),#418723); +#516835 = PRESENTATION_STYLE_ASSIGNMENT((#516836)); +#516836 = SURFACE_STYLE_USAGE(.BOTH.,#516837); +#516837 = SURFACE_SIDE_STYLE('',(#516838)); +#516838 = SURFACE_STYLE_FILL_AREA(#516839); +#516839 = FILL_AREA_STYLE('',(#516840)); +#516840 = FILL_AREA_STYLE_COLOUR('',#516784); +#516841 = STYLED_ITEM('color',(#516842),#418815); +#516842 = PRESENTATION_STYLE_ASSIGNMENT((#516843)); +#516843 = SURFACE_STYLE_USAGE(.BOTH.,#516844); +#516844 = SURFACE_SIDE_STYLE('',(#516845)); +#516845 = SURFACE_STYLE_FILL_AREA(#516846); +#516846 = FILL_AREA_STYLE('',(#516847)); +#516847 = FILL_AREA_STYLE_COLOUR('',#516784); +#516848 = STYLED_ITEM('color',(#516849),#418907); +#516849 = PRESENTATION_STYLE_ASSIGNMENT((#516850)); +#516850 = SURFACE_STYLE_USAGE(.BOTH.,#516851); +#516851 = SURFACE_SIDE_STYLE('',(#516852)); +#516852 = SURFACE_STYLE_FILL_AREA(#516853); +#516853 = FILL_AREA_STYLE('',(#516854)); +#516854 = FILL_AREA_STYLE_COLOUR('',#516784); +#516855 = STYLED_ITEM('color',(#516856),#418999); +#516856 = PRESENTATION_STYLE_ASSIGNMENT((#516857)); +#516857 = SURFACE_STYLE_USAGE(.BOTH.,#516858); +#516858 = SURFACE_SIDE_STYLE('',(#516859)); +#516859 = SURFACE_STYLE_FILL_AREA(#516860); +#516860 = FILL_AREA_STYLE('',(#516861)); +#516861 = FILL_AREA_STYLE_COLOUR('',#516784); +#516862 = STYLED_ITEM('color',(#516863),#419091); +#516863 = PRESENTATION_STYLE_ASSIGNMENT((#516864)); +#516864 = SURFACE_STYLE_USAGE(.BOTH.,#516865); +#516865 = SURFACE_SIDE_STYLE('',(#516866)); +#516866 = SURFACE_STYLE_FILL_AREA(#516867); +#516867 = FILL_AREA_STYLE('',(#516868)); +#516868 = FILL_AREA_STYLE_COLOUR('',#516784); +#516869 = STYLED_ITEM('color',(#516870),#419183); +#516870 = PRESENTATION_STYLE_ASSIGNMENT((#516871)); +#516871 = SURFACE_STYLE_USAGE(.BOTH.,#516872); +#516872 = SURFACE_SIDE_STYLE('',(#516873)); +#516873 = SURFACE_STYLE_FILL_AREA(#516874); +#516874 = FILL_AREA_STYLE('',(#516875)); +#516875 = FILL_AREA_STYLE_COLOUR('',#516784); +#516876 = STYLED_ITEM('color',(#516877),#419275); +#516877 = PRESENTATION_STYLE_ASSIGNMENT((#516878)); +#516878 = SURFACE_STYLE_USAGE(.BOTH.,#516879); +#516879 = SURFACE_SIDE_STYLE('',(#516880)); +#516880 = SURFACE_STYLE_FILL_AREA(#516881); +#516881 = FILL_AREA_STYLE('',(#516882)); +#516882 = FILL_AREA_STYLE_COLOUR('',#516784); +#516883 = STYLED_ITEM('color',(#516884),#419367); +#516884 = PRESENTATION_STYLE_ASSIGNMENT((#516885)); +#516885 = SURFACE_STYLE_USAGE(.BOTH.,#516886); +#516886 = SURFACE_SIDE_STYLE('',(#516887)); +#516887 = SURFACE_STYLE_FILL_AREA(#516888); +#516888 = FILL_AREA_STYLE('',(#516889)); +#516889 = FILL_AREA_STYLE_COLOUR('',#516784); +#516890 = STYLED_ITEM('color',(#516891),#419459); +#516891 = PRESENTATION_STYLE_ASSIGNMENT((#516892)); +#516892 = SURFACE_STYLE_USAGE(.BOTH.,#516893); +#516893 = SURFACE_SIDE_STYLE('',(#516894)); +#516894 = SURFACE_STYLE_FILL_AREA(#516895); +#516895 = FILL_AREA_STYLE('',(#516896)); +#516896 = FILL_AREA_STYLE_COLOUR('',#516784); +#516897 = STYLED_ITEM('color',(#516898),#419551); +#516898 = PRESENTATION_STYLE_ASSIGNMENT((#516899)); +#516899 = SURFACE_STYLE_USAGE(.BOTH.,#516900); +#516900 = SURFACE_SIDE_STYLE('',(#516901)); +#516901 = SURFACE_STYLE_FILL_AREA(#516902); +#516902 = FILL_AREA_STYLE('',(#516903)); +#516903 = FILL_AREA_STYLE_COLOUR('',#516784); +#516904 = STYLED_ITEM('color',(#516905),#419643); +#516905 = PRESENTATION_STYLE_ASSIGNMENT((#516906)); +#516906 = SURFACE_STYLE_USAGE(.BOTH.,#516907); +#516907 = SURFACE_SIDE_STYLE('',(#516908)); +#516908 = SURFACE_STYLE_FILL_AREA(#516909); +#516909 = FILL_AREA_STYLE('',(#516910)); +#516910 = FILL_AREA_STYLE_COLOUR('',#516784); +#516911 = STYLED_ITEM('color',(#516912),#419735); +#516912 = PRESENTATION_STYLE_ASSIGNMENT((#516913)); +#516913 = SURFACE_STYLE_USAGE(.BOTH.,#516914); +#516914 = SURFACE_SIDE_STYLE('',(#516915)); +#516915 = SURFACE_STYLE_FILL_AREA(#516916); +#516916 = FILL_AREA_STYLE('',(#516917)); +#516917 = FILL_AREA_STYLE_COLOUR('',#516784); +#516918 = STYLED_ITEM('color',(#516919),#419827); +#516919 = PRESENTATION_STYLE_ASSIGNMENT((#516920)); +#516920 = SURFACE_STYLE_USAGE(.BOTH.,#516921); +#516921 = SURFACE_SIDE_STYLE('',(#516922)); +#516922 = SURFACE_STYLE_FILL_AREA(#516923); +#516923 = FILL_AREA_STYLE('',(#516924)); +#516924 = FILL_AREA_STYLE_COLOUR('',#516784); +#516925 = STYLED_ITEM('color',(#516926),#419919); +#516926 = PRESENTATION_STYLE_ASSIGNMENT((#516927)); +#516927 = SURFACE_STYLE_USAGE(.BOTH.,#516928); +#516928 = SURFACE_SIDE_STYLE('',(#516929)); +#516929 = SURFACE_STYLE_FILL_AREA(#516930); +#516930 = FILL_AREA_STYLE('',(#516931)); +#516931 = FILL_AREA_STYLE_COLOUR('',#516784); +#516932 = STYLED_ITEM('color',(#516933),#420011); +#516933 = PRESENTATION_STYLE_ASSIGNMENT((#516934)); +#516934 = SURFACE_STYLE_USAGE(.BOTH.,#516935); +#516935 = SURFACE_SIDE_STYLE('',(#516936)); +#516936 = SURFACE_STYLE_FILL_AREA(#516937); +#516937 = FILL_AREA_STYLE('',(#516938)); +#516938 = FILL_AREA_STYLE_COLOUR('',#516784); +#516939 = STYLED_ITEM('color',(#516940),#420103); +#516940 = PRESENTATION_STYLE_ASSIGNMENT((#516941)); +#516941 = SURFACE_STYLE_USAGE(.BOTH.,#516942); +#516942 = SURFACE_SIDE_STYLE('',(#516943)); +#516943 = SURFACE_STYLE_FILL_AREA(#516944); +#516944 = FILL_AREA_STYLE('',(#516945)); +#516945 = FILL_AREA_STYLE_COLOUR('',#516784); +#516946 = STYLED_ITEM('color',(#516947),#420195); +#516947 = PRESENTATION_STYLE_ASSIGNMENT((#516948)); +#516948 = SURFACE_STYLE_USAGE(.BOTH.,#516949); +#516949 = SURFACE_SIDE_STYLE('',(#516950)); +#516950 = SURFACE_STYLE_FILL_AREA(#516951); +#516951 = FILL_AREA_STYLE('',(#516952)); +#516952 = FILL_AREA_STYLE_COLOUR('',#516784); +#516953 = STYLED_ITEM('color',(#516954),#420287); +#516954 = PRESENTATION_STYLE_ASSIGNMENT((#516955)); +#516955 = SURFACE_STYLE_USAGE(.BOTH.,#516956); +#516956 = SURFACE_SIDE_STYLE('',(#516957)); +#516957 = SURFACE_STYLE_FILL_AREA(#516958); +#516958 = FILL_AREA_STYLE('',(#516959)); +#516959 = FILL_AREA_STYLE_COLOUR('',#516784); +#516960 = STYLED_ITEM('color',(#516961),#420379); +#516961 = PRESENTATION_STYLE_ASSIGNMENT((#516962)); +#516962 = SURFACE_STYLE_USAGE(.BOTH.,#516963); +#516963 = SURFACE_SIDE_STYLE('',(#516964)); +#516964 = SURFACE_STYLE_FILL_AREA(#516965); +#516965 = FILL_AREA_STYLE('',(#516966)); +#516966 = FILL_AREA_STYLE_COLOUR('',#516784); +#516967 = STYLED_ITEM('color',(#516968),#420471); +#516968 = PRESENTATION_STYLE_ASSIGNMENT((#516969)); +#516969 = SURFACE_STYLE_USAGE(.BOTH.,#516970); +#516970 = SURFACE_SIDE_STYLE('',(#516971)); +#516971 = SURFACE_STYLE_FILL_AREA(#516972); +#516972 = FILL_AREA_STYLE('',(#516973)); +#516973 = FILL_AREA_STYLE_COLOUR('',#516784); +#516974 = STYLED_ITEM('color',(#516975),#420563); +#516975 = PRESENTATION_STYLE_ASSIGNMENT((#516976)); +#516976 = SURFACE_STYLE_USAGE(.BOTH.,#516977); +#516977 = SURFACE_SIDE_STYLE('',(#516978)); +#516978 = SURFACE_STYLE_FILL_AREA(#516979); +#516979 = FILL_AREA_STYLE('',(#516980)); +#516980 = FILL_AREA_STYLE_COLOUR('',#516784); +#516981 = STYLED_ITEM('color',(#516982),#420655); +#516982 = PRESENTATION_STYLE_ASSIGNMENT((#516983)); +#516983 = SURFACE_STYLE_USAGE(.BOTH.,#516984); +#516984 = SURFACE_SIDE_STYLE('',(#516985)); +#516985 = SURFACE_STYLE_FILL_AREA(#516986); +#516986 = FILL_AREA_STYLE('',(#516987)); +#516987 = FILL_AREA_STYLE_COLOUR('',#516784); +#516988 = STYLED_ITEM('color',(#516989),#420747); +#516989 = PRESENTATION_STYLE_ASSIGNMENT((#516990)); +#516990 = SURFACE_STYLE_USAGE(.BOTH.,#516991); +#516991 = SURFACE_SIDE_STYLE('',(#516992)); +#516992 = SURFACE_STYLE_FILL_AREA(#516993); +#516993 = FILL_AREA_STYLE('',(#516994)); +#516994 = FILL_AREA_STYLE_COLOUR('',#516784); +#516995 = STYLED_ITEM('color',(#516996),#420839); +#516996 = PRESENTATION_STYLE_ASSIGNMENT((#516997)); +#516997 = SURFACE_STYLE_USAGE(.BOTH.,#516998); +#516998 = SURFACE_SIDE_STYLE('',(#516999)); +#516999 = SURFACE_STYLE_FILL_AREA(#517000); +#517000 = FILL_AREA_STYLE('',(#517001)); +#517001 = FILL_AREA_STYLE_COLOUR('',#516784); +#517002 = STYLED_ITEM('color',(#517003),#420931); +#517003 = PRESENTATION_STYLE_ASSIGNMENT((#517004)); +#517004 = SURFACE_STYLE_USAGE(.BOTH.,#517005); +#517005 = SURFACE_SIDE_STYLE('',(#517006)); +#517006 = SURFACE_STYLE_FILL_AREA(#517007); +#517007 = FILL_AREA_STYLE('',(#517008)); +#517008 = FILL_AREA_STYLE_COLOUR('',#516784); +#517009 = STYLED_ITEM('color',(#517010),#421023); +#517010 = PRESENTATION_STYLE_ASSIGNMENT((#517011)); +#517011 = SURFACE_STYLE_USAGE(.BOTH.,#517012); +#517012 = SURFACE_SIDE_STYLE('',(#517013)); +#517013 = SURFACE_STYLE_FILL_AREA(#517014); +#517014 = FILL_AREA_STYLE('',(#517015)); +#517015 = FILL_AREA_STYLE_COLOUR('',#516784); +#517016 = STYLED_ITEM('color',(#517017),#421115); +#517017 = PRESENTATION_STYLE_ASSIGNMENT((#517018)); +#517018 = SURFACE_STYLE_USAGE(.BOTH.,#517019); +#517019 = SURFACE_SIDE_STYLE('',(#517020)); +#517020 = SURFACE_STYLE_FILL_AREA(#517021); +#517021 = FILL_AREA_STYLE('',(#517022)); +#517022 = FILL_AREA_STYLE_COLOUR('',#516784); +#517023 = STYLED_ITEM('color',(#517024),#421207); +#517024 = PRESENTATION_STYLE_ASSIGNMENT((#517025)); +#517025 = SURFACE_STYLE_USAGE(.BOTH.,#517026); +#517026 = SURFACE_SIDE_STYLE('',(#517027)); +#517027 = SURFACE_STYLE_FILL_AREA(#517028); +#517028 = FILL_AREA_STYLE('',(#517029)); +#517029 = FILL_AREA_STYLE_COLOUR('',#516784); +#517030 = STYLED_ITEM('color',(#517031),#421299); +#517031 = PRESENTATION_STYLE_ASSIGNMENT((#517032)); +#517032 = SURFACE_STYLE_USAGE(.BOTH.,#517033); +#517033 = SURFACE_SIDE_STYLE('',(#517034)); +#517034 = SURFACE_STYLE_FILL_AREA(#517035); +#517035 = FILL_AREA_STYLE('',(#517036)); +#517036 = FILL_AREA_STYLE_COLOUR('',#516784); +#517037 = STYLED_ITEM('color',(#517038),#421391); +#517038 = PRESENTATION_STYLE_ASSIGNMENT((#517039)); +#517039 = SURFACE_STYLE_USAGE(.BOTH.,#517040); +#517040 = SURFACE_SIDE_STYLE('',(#517041)); +#517041 = SURFACE_STYLE_FILL_AREA(#517042); +#517042 = FILL_AREA_STYLE('',(#517043)); +#517043 = FILL_AREA_STYLE_COLOUR('',#516784); +#517044 = STYLED_ITEM('color',(#517045),#421483); +#517045 = PRESENTATION_STYLE_ASSIGNMENT((#517046)); +#517046 = SURFACE_STYLE_USAGE(.BOTH.,#517047); +#517047 = SURFACE_SIDE_STYLE('',(#517048)); +#517048 = SURFACE_STYLE_FILL_AREA(#517049); +#517049 = FILL_AREA_STYLE('',(#517050)); +#517050 = FILL_AREA_STYLE_COLOUR('',#516784); +#517051 = STYLED_ITEM('color',(#517052),#421575); +#517052 = PRESENTATION_STYLE_ASSIGNMENT((#517053)); +#517053 = SURFACE_STYLE_USAGE(.BOTH.,#517054); +#517054 = SURFACE_SIDE_STYLE('',(#517055)); +#517055 = SURFACE_STYLE_FILL_AREA(#517056); +#517056 = FILL_AREA_STYLE('',(#517057)); +#517057 = FILL_AREA_STYLE_COLOUR('',#516784); +#517058 = STYLED_ITEM('color',(#517059),#421667); +#517059 = PRESENTATION_STYLE_ASSIGNMENT((#517060)); +#517060 = SURFACE_STYLE_USAGE(.BOTH.,#517061); +#517061 = SURFACE_SIDE_STYLE('',(#517062)); +#517062 = SURFACE_STYLE_FILL_AREA(#517063); +#517063 = FILL_AREA_STYLE('',(#517064)); +#517064 = FILL_AREA_STYLE_COLOUR('',#516784); +#517065 = STYLED_ITEM('color',(#517066),#421759); +#517066 = PRESENTATION_STYLE_ASSIGNMENT((#517067)); +#517067 = SURFACE_STYLE_USAGE(.BOTH.,#517068); +#517068 = SURFACE_SIDE_STYLE('',(#517069)); +#517069 = SURFACE_STYLE_FILL_AREA(#517070); +#517070 = FILL_AREA_STYLE('',(#517071)); +#517071 = FILL_AREA_STYLE_COLOUR('',#516784); +#517072 = STYLED_ITEM('color',(#517073),#421851); +#517073 = PRESENTATION_STYLE_ASSIGNMENT((#517074)); +#517074 = SURFACE_STYLE_USAGE(.BOTH.,#517075); +#517075 = SURFACE_SIDE_STYLE('',(#517076)); +#517076 = SURFACE_STYLE_FILL_AREA(#517077); +#517077 = FILL_AREA_STYLE('',(#517078)); +#517078 = FILL_AREA_STYLE_COLOUR('',#516784); +#517079 = STYLED_ITEM('color',(#517080),#421943); +#517080 = PRESENTATION_STYLE_ASSIGNMENT((#517081)); +#517081 = SURFACE_STYLE_USAGE(.BOTH.,#517082); +#517082 = SURFACE_SIDE_STYLE('',(#517083)); +#517083 = SURFACE_STYLE_FILL_AREA(#517084); +#517084 = FILL_AREA_STYLE('',(#517085)); +#517085 = FILL_AREA_STYLE_COLOUR('',#516784); +#517086 = STYLED_ITEM('color',(#517087),#422035); +#517087 = PRESENTATION_STYLE_ASSIGNMENT((#517088)); +#517088 = SURFACE_STYLE_USAGE(.BOTH.,#517089); +#517089 = SURFACE_SIDE_STYLE('',(#517090)); +#517090 = SURFACE_STYLE_FILL_AREA(#517091); +#517091 = FILL_AREA_STYLE('',(#517092)); +#517092 = FILL_AREA_STYLE_COLOUR('',#516784); +#517093 = STYLED_ITEM('color',(#517094),#422127); +#517094 = PRESENTATION_STYLE_ASSIGNMENT((#517095)); +#517095 = SURFACE_STYLE_USAGE(.BOTH.,#517096); +#517096 = SURFACE_SIDE_STYLE('',(#517097)); +#517097 = SURFACE_STYLE_FILL_AREA(#517098); +#517098 = FILL_AREA_STYLE('',(#517099)); +#517099 = FILL_AREA_STYLE_COLOUR('',#516784); +#517100 = STYLED_ITEM('color',(#517101),#422219); +#517101 = PRESENTATION_STYLE_ASSIGNMENT((#517102)); +#517102 = SURFACE_STYLE_USAGE(.BOTH.,#517103); +#517103 = SURFACE_SIDE_STYLE('',(#517104)); +#517104 = SURFACE_STYLE_FILL_AREA(#517105); +#517105 = FILL_AREA_STYLE('',(#517106)); +#517106 = FILL_AREA_STYLE_COLOUR('',#516784); +#517107 = STYLED_ITEM('color',(#517108),#422311); +#517108 = PRESENTATION_STYLE_ASSIGNMENT((#517109)); +#517109 = SURFACE_STYLE_USAGE(.BOTH.,#517110); +#517110 = SURFACE_SIDE_STYLE('',(#517111)); +#517111 = SURFACE_STYLE_FILL_AREA(#517112); +#517112 = FILL_AREA_STYLE('',(#517113)); +#517113 = FILL_AREA_STYLE_COLOUR('',#516784); +#517114 = STYLED_ITEM('color',(#517115),#422403); +#517115 = PRESENTATION_STYLE_ASSIGNMENT((#517116)); +#517116 = SURFACE_STYLE_USAGE(.BOTH.,#517117); +#517117 = SURFACE_SIDE_STYLE('',(#517118)); +#517118 = SURFACE_STYLE_FILL_AREA(#517119); +#517119 = FILL_AREA_STYLE('',(#517120)); +#517120 = FILL_AREA_STYLE_COLOUR('',#516784); +#517121 = STYLED_ITEM('color',(#517122),#422495); +#517122 = PRESENTATION_STYLE_ASSIGNMENT((#517123)); +#517123 = SURFACE_STYLE_USAGE(.BOTH.,#517124); +#517124 = SURFACE_SIDE_STYLE('',(#517125)); +#517125 = SURFACE_STYLE_FILL_AREA(#517126); +#517126 = FILL_AREA_STYLE('',(#517127)); +#517127 = FILL_AREA_STYLE_COLOUR('',#516784); +#517128 = STYLED_ITEM('color',(#517129),#422587); +#517129 = PRESENTATION_STYLE_ASSIGNMENT((#517130)); +#517130 = SURFACE_STYLE_USAGE(.BOTH.,#517131); +#517131 = SURFACE_SIDE_STYLE('',(#517132)); +#517132 = SURFACE_STYLE_FILL_AREA(#517133); +#517133 = FILL_AREA_STYLE('',(#517134)); +#517134 = FILL_AREA_STYLE_COLOUR('',#516784); +#517135 = STYLED_ITEM('color',(#517136),#422679); +#517136 = PRESENTATION_STYLE_ASSIGNMENT((#517137)); +#517137 = SURFACE_STYLE_USAGE(.BOTH.,#517138); +#517138 = SURFACE_SIDE_STYLE('',(#517139)); +#517139 = SURFACE_STYLE_FILL_AREA(#517140); +#517140 = FILL_AREA_STYLE('',(#517141)); +#517141 = FILL_AREA_STYLE_COLOUR('',#516784); +#517142 = STYLED_ITEM('color',(#517143),#422771); +#517143 = PRESENTATION_STYLE_ASSIGNMENT((#517144)); +#517144 = SURFACE_STYLE_USAGE(.BOTH.,#517145); +#517145 = SURFACE_SIDE_STYLE('',(#517146)); +#517146 = SURFACE_STYLE_FILL_AREA(#517147); +#517147 = FILL_AREA_STYLE('',(#517148)); +#517148 = FILL_AREA_STYLE_COLOUR('',#516784); +#517149 = STYLED_ITEM('color',(#517150),#422863); +#517150 = PRESENTATION_STYLE_ASSIGNMENT((#517151)); +#517151 = SURFACE_STYLE_USAGE(.BOTH.,#517152); +#517152 = SURFACE_SIDE_STYLE('',(#517153)); +#517153 = SURFACE_STYLE_FILL_AREA(#517154); +#517154 = FILL_AREA_STYLE('',(#517155)); +#517155 = FILL_AREA_STYLE_COLOUR('',#516784); +#517156 = STYLED_ITEM('color',(#517157),#422955); +#517157 = PRESENTATION_STYLE_ASSIGNMENT((#517158)); +#517158 = SURFACE_STYLE_USAGE(.BOTH.,#517159); +#517159 = SURFACE_SIDE_STYLE('',(#517160)); +#517160 = SURFACE_STYLE_FILL_AREA(#517161); +#517161 = FILL_AREA_STYLE('',(#517162)); +#517162 = FILL_AREA_STYLE_COLOUR('',#516784); +#517163 = STYLED_ITEM('color',(#517164),#423047); +#517164 = PRESENTATION_STYLE_ASSIGNMENT((#517165)); +#517165 = SURFACE_STYLE_USAGE(.BOTH.,#517166); +#517166 = SURFACE_SIDE_STYLE('',(#517167)); +#517167 = SURFACE_STYLE_FILL_AREA(#517168); +#517168 = FILL_AREA_STYLE('',(#517169)); +#517169 = FILL_AREA_STYLE_COLOUR('',#516784); +#517170 = STYLED_ITEM('color',(#517171),#423139); +#517171 = PRESENTATION_STYLE_ASSIGNMENT((#517172)); +#517172 = SURFACE_STYLE_USAGE(.BOTH.,#517173); +#517173 = SURFACE_SIDE_STYLE('',(#517174)); +#517174 = SURFACE_STYLE_FILL_AREA(#517175); +#517175 = FILL_AREA_STYLE('',(#517176)); +#517176 = FILL_AREA_STYLE_COLOUR('',#516784); +#517177 = STYLED_ITEM('color',(#517178),#423231); +#517178 = PRESENTATION_STYLE_ASSIGNMENT((#517179)); +#517179 = SURFACE_STYLE_USAGE(.BOTH.,#517180); +#517180 = SURFACE_SIDE_STYLE('',(#517181)); +#517181 = SURFACE_STYLE_FILL_AREA(#517182); +#517182 = FILL_AREA_STYLE('',(#517183)); +#517183 = FILL_AREA_STYLE_COLOUR('',#516784); +#517184 = STYLED_ITEM('color',(#517185),#423323); +#517185 = PRESENTATION_STYLE_ASSIGNMENT((#517186)); +#517186 = SURFACE_STYLE_USAGE(.BOTH.,#517187); +#517187 = SURFACE_SIDE_STYLE('',(#517188)); +#517188 = SURFACE_STYLE_FILL_AREA(#517189); +#517189 = FILL_AREA_STYLE('',(#517190)); +#517190 = FILL_AREA_STYLE_COLOUR('',#516784); +#517191 = STYLED_ITEM('color',(#517192),#423415); +#517192 = PRESENTATION_STYLE_ASSIGNMENT((#517193)); +#517193 = SURFACE_STYLE_USAGE(.BOTH.,#517194); +#517194 = SURFACE_SIDE_STYLE('',(#517195)); +#517195 = SURFACE_STYLE_FILL_AREA(#517196); +#517196 = FILL_AREA_STYLE('',(#517197)); +#517197 = FILL_AREA_STYLE_COLOUR('',#516784); +#517198 = STYLED_ITEM('color',(#517199),#423507); +#517199 = PRESENTATION_STYLE_ASSIGNMENT((#517200)); +#517200 = SURFACE_STYLE_USAGE(.BOTH.,#517201); +#517201 = SURFACE_SIDE_STYLE('',(#517202)); +#517202 = SURFACE_STYLE_FILL_AREA(#517203); +#517203 = FILL_AREA_STYLE('',(#517204)); +#517204 = FILL_AREA_STYLE_COLOUR('',#516784); +#517205 = STYLED_ITEM('color',(#517206),#423599); +#517206 = PRESENTATION_STYLE_ASSIGNMENT((#517207)); +#517207 = SURFACE_STYLE_USAGE(.BOTH.,#517208); +#517208 = SURFACE_SIDE_STYLE('',(#517209)); +#517209 = SURFACE_STYLE_FILL_AREA(#517210); +#517210 = FILL_AREA_STYLE('',(#517211)); +#517211 = FILL_AREA_STYLE_COLOUR('',#516784); +#517212 = STYLED_ITEM('color',(#517213),#423691); +#517213 = PRESENTATION_STYLE_ASSIGNMENT((#517214)); +#517214 = SURFACE_STYLE_USAGE(.BOTH.,#517215); +#517215 = SURFACE_SIDE_STYLE('',(#517216)); +#517216 = SURFACE_STYLE_FILL_AREA(#517217); +#517217 = FILL_AREA_STYLE('',(#517218)); +#517218 = FILL_AREA_STYLE_COLOUR('',#516784); +#517219 = STYLED_ITEM('color',(#517220),#423783); +#517220 = PRESENTATION_STYLE_ASSIGNMENT((#517221)); +#517221 = SURFACE_STYLE_USAGE(.BOTH.,#517222); +#517222 = SURFACE_SIDE_STYLE('',(#517223)); +#517223 = SURFACE_STYLE_FILL_AREA(#517224); +#517224 = FILL_AREA_STYLE('',(#517225)); +#517225 = FILL_AREA_STYLE_COLOUR('',#516784); +#517226 = STYLED_ITEM('color',(#517227),#423875); +#517227 = PRESENTATION_STYLE_ASSIGNMENT((#517228)); +#517228 = SURFACE_STYLE_USAGE(.BOTH.,#517229); +#517229 = SURFACE_SIDE_STYLE('',(#517230)); +#517230 = SURFACE_STYLE_FILL_AREA(#517231); +#517231 = FILL_AREA_STYLE('',(#517232)); +#517232 = FILL_AREA_STYLE_COLOUR('',#516784); +#517233 = STYLED_ITEM('color',(#517234),#423967); +#517234 = PRESENTATION_STYLE_ASSIGNMENT((#517235)); +#517235 = SURFACE_STYLE_USAGE(.BOTH.,#517236); +#517236 = SURFACE_SIDE_STYLE('',(#517237)); +#517237 = SURFACE_STYLE_FILL_AREA(#517238); +#517238 = FILL_AREA_STYLE('',(#517239)); +#517239 = FILL_AREA_STYLE_COLOUR('',#516784); +#517240 = STYLED_ITEM('color',(#517241),#424059); +#517241 = PRESENTATION_STYLE_ASSIGNMENT((#517242)); +#517242 = SURFACE_STYLE_USAGE(.BOTH.,#517243); +#517243 = SURFACE_SIDE_STYLE('',(#517244)); +#517244 = SURFACE_STYLE_FILL_AREA(#517245); +#517245 = FILL_AREA_STYLE('',(#517246)); +#517246 = FILL_AREA_STYLE_COLOUR('',#516784); +#517247 = STYLED_ITEM('color',(#517248),#424151); +#517248 = PRESENTATION_STYLE_ASSIGNMENT((#517249)); +#517249 = SURFACE_STYLE_USAGE(.BOTH.,#517250); +#517250 = SURFACE_SIDE_STYLE('',(#517251)); +#517251 = SURFACE_STYLE_FILL_AREA(#517252); +#517252 = FILL_AREA_STYLE('',(#517253)); +#517253 = FILL_AREA_STYLE_COLOUR('',#516784); +#517254 = STYLED_ITEM('color',(#517255),#424243); +#517255 = PRESENTATION_STYLE_ASSIGNMENT((#517256)); +#517256 = SURFACE_STYLE_USAGE(.BOTH.,#517257); +#517257 = SURFACE_SIDE_STYLE('',(#517258)); +#517258 = SURFACE_STYLE_FILL_AREA(#517259); +#517259 = FILL_AREA_STYLE('',(#517260)); +#517260 = FILL_AREA_STYLE_COLOUR('',#516784); +#517261 = STYLED_ITEM('color',(#517262),#424335); +#517262 = PRESENTATION_STYLE_ASSIGNMENT((#517263)); +#517263 = SURFACE_STYLE_USAGE(.BOTH.,#517264); +#517264 = SURFACE_SIDE_STYLE('',(#517265)); +#517265 = SURFACE_STYLE_FILL_AREA(#517266); +#517266 = FILL_AREA_STYLE('',(#517267)); +#517267 = FILL_AREA_STYLE_COLOUR('',#516784); +#517268 = STYLED_ITEM('color',(#517269),#424427); +#517269 = PRESENTATION_STYLE_ASSIGNMENT((#517270)); +#517270 = SURFACE_STYLE_USAGE(.BOTH.,#517271); +#517271 = SURFACE_SIDE_STYLE('',(#517272)); +#517272 = SURFACE_STYLE_FILL_AREA(#517273); +#517273 = FILL_AREA_STYLE('',(#517274)); +#517274 = FILL_AREA_STYLE_COLOUR('',#516784); +#517275 = STYLED_ITEM('color',(#517276),#424519); +#517276 = PRESENTATION_STYLE_ASSIGNMENT((#517277)); +#517277 = SURFACE_STYLE_USAGE(.BOTH.,#517278); +#517278 = SURFACE_SIDE_STYLE('',(#517279)); +#517279 = SURFACE_STYLE_FILL_AREA(#517280); +#517280 = FILL_AREA_STYLE('',(#517281)); +#517281 = FILL_AREA_STYLE_COLOUR('',#516784); +#517282 = STYLED_ITEM('color',(#517283),#424611); +#517283 = PRESENTATION_STYLE_ASSIGNMENT((#517284)); +#517284 = SURFACE_STYLE_USAGE(.BOTH.,#517285); +#517285 = SURFACE_SIDE_STYLE('',(#517286)); +#517286 = SURFACE_STYLE_FILL_AREA(#517287); +#517287 = FILL_AREA_STYLE('',(#517288)); +#517288 = FILL_AREA_STYLE_COLOUR('',#516784); +#517289 = STYLED_ITEM('color',(#517290),#424703); +#517290 = PRESENTATION_STYLE_ASSIGNMENT((#517291)); +#517291 = SURFACE_STYLE_USAGE(.BOTH.,#517292); +#517292 = SURFACE_SIDE_STYLE('',(#517293)); +#517293 = SURFACE_STYLE_FILL_AREA(#517294); +#517294 = FILL_AREA_STYLE('',(#517295)); +#517295 = FILL_AREA_STYLE_COLOUR('',#516784); +#517296 = STYLED_ITEM('color',(#517297),#424795); +#517297 = PRESENTATION_STYLE_ASSIGNMENT((#517298)); +#517298 = SURFACE_STYLE_USAGE(.BOTH.,#517299); +#517299 = SURFACE_SIDE_STYLE('',(#517300)); +#517300 = SURFACE_STYLE_FILL_AREA(#517301); +#517301 = FILL_AREA_STYLE('',(#517302)); +#517302 = FILL_AREA_STYLE_COLOUR('',#516784); +#517303 = STYLED_ITEM('color',(#517304),#424887); +#517304 = PRESENTATION_STYLE_ASSIGNMENT((#517305)); +#517305 = SURFACE_STYLE_USAGE(.BOTH.,#517306); +#517306 = SURFACE_SIDE_STYLE('',(#517307)); +#517307 = SURFACE_STYLE_FILL_AREA(#517308); +#517308 = FILL_AREA_STYLE('',(#517309)); +#517309 = FILL_AREA_STYLE_COLOUR('',#516784); +#517310 = STYLED_ITEM('color',(#517311),#424979); +#517311 = PRESENTATION_STYLE_ASSIGNMENT((#517312)); +#517312 = SURFACE_STYLE_USAGE(.BOTH.,#517313); +#517313 = SURFACE_SIDE_STYLE('',(#517314)); +#517314 = SURFACE_STYLE_FILL_AREA(#517315); +#517315 = FILL_AREA_STYLE('',(#517316)); +#517316 = FILL_AREA_STYLE_COLOUR('',#516784); +#517317 = STYLED_ITEM('color',(#517318),#425071); +#517318 = PRESENTATION_STYLE_ASSIGNMENT((#517319)); +#517319 = SURFACE_STYLE_USAGE(.BOTH.,#517320); +#517320 = SURFACE_SIDE_STYLE('',(#517321)); +#517321 = SURFACE_STYLE_FILL_AREA(#517322); +#517322 = FILL_AREA_STYLE('',(#517323)); +#517323 = FILL_AREA_STYLE_COLOUR('',#516784); +#517324 = STYLED_ITEM('color',(#517325),#425163); +#517325 = PRESENTATION_STYLE_ASSIGNMENT((#517326)); +#517326 = SURFACE_STYLE_USAGE(.BOTH.,#517327); +#517327 = SURFACE_SIDE_STYLE('',(#517328)); +#517328 = SURFACE_STYLE_FILL_AREA(#517329); +#517329 = FILL_AREA_STYLE('',(#517330)); +#517330 = FILL_AREA_STYLE_COLOUR('',#516784); +#517331 = STYLED_ITEM('color',(#517332),#425255); +#517332 = PRESENTATION_STYLE_ASSIGNMENT((#517333)); +#517333 = SURFACE_STYLE_USAGE(.BOTH.,#517334); +#517334 = SURFACE_SIDE_STYLE('',(#517335)); +#517335 = SURFACE_STYLE_FILL_AREA(#517336); +#517336 = FILL_AREA_STYLE('',(#517337)); +#517337 = FILL_AREA_STYLE_COLOUR('',#516784); +#517338 = STYLED_ITEM('color',(#517339),#425347); +#517339 = PRESENTATION_STYLE_ASSIGNMENT((#517340)); +#517340 = SURFACE_STYLE_USAGE(.BOTH.,#517341); +#517341 = SURFACE_SIDE_STYLE('',(#517342)); +#517342 = SURFACE_STYLE_FILL_AREA(#517343); +#517343 = FILL_AREA_STYLE('',(#517344)); +#517344 = FILL_AREA_STYLE_COLOUR('',#516784); +#517345 = STYLED_ITEM('color',(#517346),#425439); +#517346 = PRESENTATION_STYLE_ASSIGNMENT((#517347)); +#517347 = SURFACE_STYLE_USAGE(.BOTH.,#517348); +#517348 = SURFACE_SIDE_STYLE('',(#517349)); +#517349 = SURFACE_STYLE_FILL_AREA(#517350); +#517350 = FILL_AREA_STYLE('',(#517351)); +#517351 = FILL_AREA_STYLE_COLOUR('',#516784); +#517352 = STYLED_ITEM('color',(#517353),#425531); +#517353 = PRESENTATION_STYLE_ASSIGNMENT((#517354)); +#517354 = SURFACE_STYLE_USAGE(.BOTH.,#517355); +#517355 = SURFACE_SIDE_STYLE('',(#517356)); +#517356 = SURFACE_STYLE_FILL_AREA(#517357); +#517357 = FILL_AREA_STYLE('',(#517358)); +#517358 = FILL_AREA_STYLE_COLOUR('',#516784); +#517359 = STYLED_ITEM('color',(#517360),#425623); +#517360 = PRESENTATION_STYLE_ASSIGNMENT((#517361)); +#517361 = SURFACE_STYLE_USAGE(.BOTH.,#517362); +#517362 = SURFACE_SIDE_STYLE('',(#517363)); +#517363 = SURFACE_STYLE_FILL_AREA(#517364); +#517364 = FILL_AREA_STYLE('',(#517365)); +#517365 = FILL_AREA_STYLE_COLOUR('',#516784); +#517366 = STYLED_ITEM('color',(#517367),#425715); +#517367 = PRESENTATION_STYLE_ASSIGNMENT((#517368)); +#517368 = SURFACE_STYLE_USAGE(.BOTH.,#517369); +#517369 = SURFACE_SIDE_STYLE('',(#517370)); +#517370 = SURFACE_STYLE_FILL_AREA(#517371); +#517371 = FILL_AREA_STYLE('',(#517372)); +#517372 = FILL_AREA_STYLE_COLOUR('',#516784); +#517373 = STYLED_ITEM('color',(#517374),#425807); +#517374 = PRESENTATION_STYLE_ASSIGNMENT((#517375)); +#517375 = SURFACE_STYLE_USAGE(.BOTH.,#517376); +#517376 = SURFACE_SIDE_STYLE('',(#517377)); +#517377 = SURFACE_STYLE_FILL_AREA(#517378); +#517378 = FILL_AREA_STYLE('',(#517379)); +#517379 = FILL_AREA_STYLE_COLOUR('',#516784); +#517380 = STYLED_ITEM('color',(#517381),#425899); +#517381 = PRESENTATION_STYLE_ASSIGNMENT((#517382)); +#517382 = SURFACE_STYLE_USAGE(.BOTH.,#517383); +#517383 = SURFACE_SIDE_STYLE('',(#517384)); +#517384 = SURFACE_STYLE_FILL_AREA(#517385); +#517385 = FILL_AREA_STYLE('',(#517386)); +#517386 = FILL_AREA_STYLE_COLOUR('',#516784); +#517387 = STYLED_ITEM('color',(#517388),#425991); +#517388 = PRESENTATION_STYLE_ASSIGNMENT((#517389)); +#517389 = SURFACE_STYLE_USAGE(.BOTH.,#517390); +#517390 = SURFACE_SIDE_STYLE('',(#517391)); +#517391 = SURFACE_STYLE_FILL_AREA(#517392); +#517392 = FILL_AREA_STYLE('',(#517393)); +#517393 = FILL_AREA_STYLE_COLOUR('',#516784); +#517394 = STYLED_ITEM('color',(#517395),#426083); +#517395 = PRESENTATION_STYLE_ASSIGNMENT((#517396)); +#517396 = SURFACE_STYLE_USAGE(.BOTH.,#517397); +#517397 = SURFACE_SIDE_STYLE('',(#517398)); +#517398 = SURFACE_STYLE_FILL_AREA(#517399); +#517399 = FILL_AREA_STYLE('',(#517400)); +#517400 = FILL_AREA_STYLE_COLOUR('',#516784); +#517401 = STYLED_ITEM('color',(#517402),#426175); +#517402 = PRESENTATION_STYLE_ASSIGNMENT((#517403)); +#517403 = SURFACE_STYLE_USAGE(.BOTH.,#517404); +#517404 = SURFACE_SIDE_STYLE('',(#517405)); +#517405 = SURFACE_STYLE_FILL_AREA(#517406); +#517406 = FILL_AREA_STYLE('',(#517407)); +#517407 = FILL_AREA_STYLE_COLOUR('',#516784); +#517408 = STYLED_ITEM('color',(#517409),#426267); +#517409 = PRESENTATION_STYLE_ASSIGNMENT((#517410)); +#517410 = SURFACE_STYLE_USAGE(.BOTH.,#517411); +#517411 = SURFACE_SIDE_STYLE('',(#517412)); +#517412 = SURFACE_STYLE_FILL_AREA(#517413); +#517413 = FILL_AREA_STYLE('',(#517414)); +#517414 = FILL_AREA_STYLE_COLOUR('',#516784); +#517415 = STYLED_ITEM('color',(#517416),#426359); +#517416 = PRESENTATION_STYLE_ASSIGNMENT((#517417)); +#517417 = SURFACE_STYLE_USAGE(.BOTH.,#517418); +#517418 = SURFACE_SIDE_STYLE('',(#517419)); +#517419 = SURFACE_STYLE_FILL_AREA(#517420); +#517420 = FILL_AREA_STYLE('',(#517421)); +#517421 = FILL_AREA_STYLE_COLOUR('',#516784); +#517422 = STYLED_ITEM('color',(#517423),#426451); +#517423 = PRESENTATION_STYLE_ASSIGNMENT((#517424)); +#517424 = SURFACE_STYLE_USAGE(.BOTH.,#517425); +#517425 = SURFACE_SIDE_STYLE('',(#517426)); +#517426 = SURFACE_STYLE_FILL_AREA(#517427); +#517427 = FILL_AREA_STYLE('',(#517428)); +#517428 = FILL_AREA_STYLE_COLOUR('',#516784); +#517429 = STYLED_ITEM('color',(#517430),#426543); +#517430 = PRESENTATION_STYLE_ASSIGNMENT((#517431)); +#517431 = SURFACE_STYLE_USAGE(.BOTH.,#517432); +#517432 = SURFACE_SIDE_STYLE('',(#517433)); +#517433 = SURFACE_STYLE_FILL_AREA(#517434); +#517434 = FILL_AREA_STYLE('',(#517435)); +#517435 = FILL_AREA_STYLE_COLOUR('',#516784); +#517436 = STYLED_ITEM('color',(#517437),#426635); +#517437 = PRESENTATION_STYLE_ASSIGNMENT((#517438)); +#517438 = SURFACE_STYLE_USAGE(.BOTH.,#517439); +#517439 = SURFACE_SIDE_STYLE('',(#517440)); +#517440 = SURFACE_STYLE_FILL_AREA(#517441); +#517441 = FILL_AREA_STYLE('',(#517442)); +#517442 = FILL_AREA_STYLE_COLOUR('',#516784); +#517443 = STYLED_ITEM('color',(#517444),#426727); +#517444 = PRESENTATION_STYLE_ASSIGNMENT((#517445)); +#517445 = SURFACE_STYLE_USAGE(.BOTH.,#517446); +#517446 = SURFACE_SIDE_STYLE('',(#517447)); +#517447 = SURFACE_STYLE_FILL_AREA(#517448); +#517448 = FILL_AREA_STYLE('',(#517449)); +#517449 = FILL_AREA_STYLE_COLOUR('',#516784); +#517450 = STYLED_ITEM('color',(#517451),#426819); +#517451 = PRESENTATION_STYLE_ASSIGNMENT((#517452)); +#517452 = SURFACE_STYLE_USAGE(.BOTH.,#517453); +#517453 = SURFACE_SIDE_STYLE('',(#517454)); +#517454 = SURFACE_STYLE_FILL_AREA(#517455); +#517455 = FILL_AREA_STYLE('',(#517456)); +#517456 = FILL_AREA_STYLE_COLOUR('',#516784); +#517457 = STYLED_ITEM('color',(#517458),#426911); +#517458 = PRESENTATION_STYLE_ASSIGNMENT((#517459)); +#517459 = SURFACE_STYLE_USAGE(.BOTH.,#517460); +#517460 = SURFACE_SIDE_STYLE('',(#517461)); +#517461 = SURFACE_STYLE_FILL_AREA(#517462); +#517462 = FILL_AREA_STYLE('',(#517463)); +#517463 = FILL_AREA_STYLE_COLOUR('',#516784); +#517464 = STYLED_ITEM('color',(#517465),#427003); +#517465 = PRESENTATION_STYLE_ASSIGNMENT((#517466)); +#517466 = SURFACE_STYLE_USAGE(.BOTH.,#517467); +#517467 = SURFACE_SIDE_STYLE('',(#517468)); +#517468 = SURFACE_STYLE_FILL_AREA(#517469); +#517469 = FILL_AREA_STYLE('',(#517470)); +#517470 = FILL_AREA_STYLE_COLOUR('',#516784); +#517471 = STYLED_ITEM('color',(#517472),#427095); +#517472 = PRESENTATION_STYLE_ASSIGNMENT((#517473)); +#517473 = SURFACE_STYLE_USAGE(.BOTH.,#517474); +#517474 = SURFACE_SIDE_STYLE('',(#517475)); +#517475 = SURFACE_STYLE_FILL_AREA(#517476); +#517476 = FILL_AREA_STYLE('',(#517477)); +#517477 = FILL_AREA_STYLE_COLOUR('',#516784); +#517478 = STYLED_ITEM('color',(#517479),#427187); +#517479 = PRESENTATION_STYLE_ASSIGNMENT((#517480)); +#517480 = SURFACE_STYLE_USAGE(.BOTH.,#517481); +#517481 = SURFACE_SIDE_STYLE('',(#517482)); +#517482 = SURFACE_STYLE_FILL_AREA(#517483); +#517483 = FILL_AREA_STYLE('',(#517484)); +#517484 = FILL_AREA_STYLE_COLOUR('',#516784); +#517485 = STYLED_ITEM('color',(#517486),#427279); +#517486 = PRESENTATION_STYLE_ASSIGNMENT((#517487)); +#517487 = SURFACE_STYLE_USAGE(.BOTH.,#517488); +#517488 = SURFACE_SIDE_STYLE('',(#517489)); +#517489 = SURFACE_STYLE_FILL_AREA(#517490); +#517490 = FILL_AREA_STYLE('',(#517491)); +#517491 = FILL_AREA_STYLE_COLOUR('',#516784); +#517492 = STYLED_ITEM('color',(#517493),#427371); +#517493 = PRESENTATION_STYLE_ASSIGNMENT((#517494)); +#517494 = SURFACE_STYLE_USAGE(.BOTH.,#517495); +#517495 = SURFACE_SIDE_STYLE('',(#517496)); +#517496 = SURFACE_STYLE_FILL_AREA(#517497); +#517497 = FILL_AREA_STYLE('',(#517498)); +#517498 = FILL_AREA_STYLE_COLOUR('',#516784); +#517499 = STYLED_ITEM('color',(#517500),#427463); +#517500 = PRESENTATION_STYLE_ASSIGNMENT((#517501)); +#517501 = SURFACE_STYLE_USAGE(.BOTH.,#517502); +#517502 = SURFACE_SIDE_STYLE('',(#517503)); +#517503 = SURFACE_STYLE_FILL_AREA(#517504); +#517504 = FILL_AREA_STYLE('',(#517505)); +#517505 = FILL_AREA_STYLE_COLOUR('',#516784); +#517506 = STYLED_ITEM('color',(#517507),#427555); +#517507 = PRESENTATION_STYLE_ASSIGNMENT((#517508)); +#517508 = SURFACE_STYLE_USAGE(.BOTH.,#517509); +#517509 = SURFACE_SIDE_STYLE('',(#517510)); +#517510 = SURFACE_STYLE_FILL_AREA(#517511); +#517511 = FILL_AREA_STYLE('',(#517512)); +#517512 = FILL_AREA_STYLE_COLOUR('',#516784); +#517513 = STYLED_ITEM('color',(#517514),#427647); +#517514 = PRESENTATION_STYLE_ASSIGNMENT((#517515)); +#517515 = SURFACE_STYLE_USAGE(.BOTH.,#517516); +#517516 = SURFACE_SIDE_STYLE('',(#517517)); +#517517 = SURFACE_STYLE_FILL_AREA(#517518); +#517518 = FILL_AREA_STYLE('',(#517519)); +#517519 = FILL_AREA_STYLE_COLOUR('',#516784); +#517520 = STYLED_ITEM('color',(#517521),#427739); +#517521 = PRESENTATION_STYLE_ASSIGNMENT((#517522)); +#517522 = SURFACE_STYLE_USAGE(.BOTH.,#517523); +#517523 = SURFACE_SIDE_STYLE('',(#517524)); +#517524 = SURFACE_STYLE_FILL_AREA(#517525); +#517525 = FILL_AREA_STYLE('',(#517526)); +#517526 = FILL_AREA_STYLE_COLOUR('',#516784); +#517527 = STYLED_ITEM('color',(#517528),#427831); +#517528 = PRESENTATION_STYLE_ASSIGNMENT((#517529)); +#517529 = SURFACE_STYLE_USAGE(.BOTH.,#517530); +#517530 = SURFACE_SIDE_STYLE('',(#517531)); +#517531 = SURFACE_STYLE_FILL_AREA(#517532); +#517532 = FILL_AREA_STYLE('',(#517533)); +#517533 = FILL_AREA_STYLE_COLOUR('',#516784); +#517534 = STYLED_ITEM('color',(#517535),#427923); +#517535 = PRESENTATION_STYLE_ASSIGNMENT((#517536)); +#517536 = SURFACE_STYLE_USAGE(.BOTH.,#517537); +#517537 = SURFACE_SIDE_STYLE('',(#517538)); +#517538 = SURFACE_STYLE_FILL_AREA(#517539); +#517539 = FILL_AREA_STYLE('',(#517540)); +#517540 = FILL_AREA_STYLE_COLOUR('',#516784); +#517541 = STYLED_ITEM('color',(#517542),#428015); +#517542 = PRESENTATION_STYLE_ASSIGNMENT((#517543)); +#517543 = SURFACE_STYLE_USAGE(.BOTH.,#517544); +#517544 = SURFACE_SIDE_STYLE('',(#517545)); +#517545 = SURFACE_STYLE_FILL_AREA(#517546); +#517546 = FILL_AREA_STYLE('',(#517547)); +#517547 = FILL_AREA_STYLE_COLOUR('',#516784); +#517548 = STYLED_ITEM('color',(#517549),#428107); +#517549 = PRESENTATION_STYLE_ASSIGNMENT((#517550)); +#517550 = SURFACE_STYLE_USAGE(.BOTH.,#517551); +#517551 = SURFACE_SIDE_STYLE('',(#517552)); +#517552 = SURFACE_STYLE_FILL_AREA(#517553); +#517553 = FILL_AREA_STYLE('',(#517554)); +#517554 = FILL_AREA_STYLE_COLOUR('',#516784); +#517555 = STYLED_ITEM('color',(#517556),#428199); +#517556 = PRESENTATION_STYLE_ASSIGNMENT((#517557)); +#517557 = SURFACE_STYLE_USAGE(.BOTH.,#517558); +#517558 = SURFACE_SIDE_STYLE('',(#517559)); +#517559 = SURFACE_STYLE_FILL_AREA(#517560); +#517560 = FILL_AREA_STYLE('',(#517561)); +#517561 = FILL_AREA_STYLE_COLOUR('',#516784); +#517562 = STYLED_ITEM('color',(#517563),#428291); +#517563 = PRESENTATION_STYLE_ASSIGNMENT((#517564)); +#517564 = SURFACE_STYLE_USAGE(.BOTH.,#517565); +#517565 = SURFACE_SIDE_STYLE('',(#517566)); +#517566 = SURFACE_STYLE_FILL_AREA(#517567); +#517567 = FILL_AREA_STYLE('',(#517568)); +#517568 = FILL_AREA_STYLE_COLOUR('',#516784); +#517569 = STYLED_ITEM('color',(#517570),#428383); +#517570 = PRESENTATION_STYLE_ASSIGNMENT((#517571)); +#517571 = SURFACE_STYLE_USAGE(.BOTH.,#517572); +#517572 = SURFACE_SIDE_STYLE('',(#517573)); +#517573 = SURFACE_STYLE_FILL_AREA(#517574); +#517574 = FILL_AREA_STYLE('',(#517575)); +#517575 = FILL_AREA_STYLE_COLOUR('',#516784); +#517576 = STYLED_ITEM('color',(#517577),#428475); +#517577 = PRESENTATION_STYLE_ASSIGNMENT((#517578)); +#517578 = SURFACE_STYLE_USAGE(.BOTH.,#517579); +#517579 = SURFACE_SIDE_STYLE('',(#517580)); +#517580 = SURFACE_STYLE_FILL_AREA(#517581); +#517581 = FILL_AREA_STYLE('',(#517582)); +#517582 = FILL_AREA_STYLE_COLOUR('',#516784); +#517583 = STYLED_ITEM('color',(#517584),#428567); +#517584 = PRESENTATION_STYLE_ASSIGNMENT((#517585)); +#517585 = SURFACE_STYLE_USAGE(.BOTH.,#517586); +#517586 = SURFACE_SIDE_STYLE('',(#517587)); +#517587 = SURFACE_STYLE_FILL_AREA(#517588); +#517588 = FILL_AREA_STYLE('',(#517589)); +#517589 = FILL_AREA_STYLE_COLOUR('',#516784); +#517590 = STYLED_ITEM('color',(#517591),#428659); +#517591 = PRESENTATION_STYLE_ASSIGNMENT((#517592)); +#517592 = SURFACE_STYLE_USAGE(.BOTH.,#517593); +#517593 = SURFACE_SIDE_STYLE('',(#517594)); +#517594 = SURFACE_STYLE_FILL_AREA(#517595); +#517595 = FILL_AREA_STYLE('',(#517596)); +#517596 = FILL_AREA_STYLE_COLOUR('',#516784); +#517597 = STYLED_ITEM('color',(#517598),#428751); +#517598 = PRESENTATION_STYLE_ASSIGNMENT((#517599)); +#517599 = SURFACE_STYLE_USAGE(.BOTH.,#517600); +#517600 = SURFACE_SIDE_STYLE('',(#517601)); +#517601 = SURFACE_STYLE_FILL_AREA(#517602); +#517602 = FILL_AREA_STYLE('',(#517603)); +#517603 = FILL_AREA_STYLE_COLOUR('',#516784); +#517604 = STYLED_ITEM('color',(#517605),#428843); +#517605 = PRESENTATION_STYLE_ASSIGNMENT((#517606)); +#517606 = SURFACE_STYLE_USAGE(.BOTH.,#517607); +#517607 = SURFACE_SIDE_STYLE('',(#517608)); +#517608 = SURFACE_STYLE_FILL_AREA(#517609); +#517609 = FILL_AREA_STYLE('',(#517610)); +#517610 = FILL_AREA_STYLE_COLOUR('',#516784); +#517611 = STYLED_ITEM('color',(#517612),#428935); +#517612 = PRESENTATION_STYLE_ASSIGNMENT((#517613)); +#517613 = SURFACE_STYLE_USAGE(.BOTH.,#517614); +#517614 = SURFACE_SIDE_STYLE('',(#517615)); +#517615 = SURFACE_STYLE_FILL_AREA(#517616); +#517616 = FILL_AREA_STYLE('',(#517617)); +#517617 = FILL_AREA_STYLE_COLOUR('',#516784); +#517618 = STYLED_ITEM('color',(#517619),#429027); +#517619 = PRESENTATION_STYLE_ASSIGNMENT((#517620)); +#517620 = SURFACE_STYLE_USAGE(.BOTH.,#517621); +#517621 = SURFACE_SIDE_STYLE('',(#517622)); +#517622 = SURFACE_STYLE_FILL_AREA(#517623); +#517623 = FILL_AREA_STYLE('',(#517624)); +#517624 = FILL_AREA_STYLE_COLOUR('',#516784); +#517625 = STYLED_ITEM('color',(#517626),#429119); +#517626 = PRESENTATION_STYLE_ASSIGNMENT((#517627)); +#517627 = SURFACE_STYLE_USAGE(.BOTH.,#517628); +#517628 = SURFACE_SIDE_STYLE('',(#517629)); +#517629 = SURFACE_STYLE_FILL_AREA(#517630); +#517630 = FILL_AREA_STYLE('',(#517631)); +#517631 = FILL_AREA_STYLE_COLOUR('',#516784); +#517632 = STYLED_ITEM('color',(#517633),#429211); +#517633 = PRESENTATION_STYLE_ASSIGNMENT((#517634)); +#517634 = SURFACE_STYLE_USAGE(.BOTH.,#517635); +#517635 = SURFACE_SIDE_STYLE('',(#517636)); +#517636 = SURFACE_STYLE_FILL_AREA(#517637); +#517637 = FILL_AREA_STYLE('',(#517638)); +#517638 = FILL_AREA_STYLE_COLOUR('',#516784); +#517639 = STYLED_ITEM('color',(#517640),#429303); +#517640 = PRESENTATION_STYLE_ASSIGNMENT((#517641)); +#517641 = SURFACE_STYLE_USAGE(.BOTH.,#517642); +#517642 = SURFACE_SIDE_STYLE('',(#517643)); +#517643 = SURFACE_STYLE_FILL_AREA(#517644); +#517644 = FILL_AREA_STYLE('',(#517645)); +#517645 = FILL_AREA_STYLE_COLOUR('',#516784); +#517646 = STYLED_ITEM('color',(#517647),#429395); +#517647 = PRESENTATION_STYLE_ASSIGNMENT((#517648)); +#517648 = SURFACE_STYLE_USAGE(.BOTH.,#517649); +#517649 = SURFACE_SIDE_STYLE('',(#517650)); +#517650 = SURFACE_STYLE_FILL_AREA(#517651); +#517651 = FILL_AREA_STYLE('',(#517652)); +#517652 = FILL_AREA_STYLE_COLOUR('',#516784); +#517653 = STYLED_ITEM('color',(#517654),#429487); +#517654 = PRESENTATION_STYLE_ASSIGNMENT((#517655)); +#517655 = SURFACE_STYLE_USAGE(.BOTH.,#517656); +#517656 = SURFACE_SIDE_STYLE('',(#517657)); +#517657 = SURFACE_STYLE_FILL_AREA(#517658); +#517658 = FILL_AREA_STYLE('',(#517659)); +#517659 = FILL_AREA_STYLE_COLOUR('',#516784); +#517660 = STYLED_ITEM('color',(#517661),#429579); +#517661 = PRESENTATION_STYLE_ASSIGNMENT((#517662)); +#517662 = SURFACE_STYLE_USAGE(.BOTH.,#517663); +#517663 = SURFACE_SIDE_STYLE('',(#517664)); +#517664 = SURFACE_STYLE_FILL_AREA(#517665); +#517665 = FILL_AREA_STYLE('',(#517666)); +#517666 = FILL_AREA_STYLE_COLOUR('',#516784); +#517667 = STYLED_ITEM('color',(#517668),#429671); +#517668 = PRESENTATION_STYLE_ASSIGNMENT((#517669)); +#517669 = SURFACE_STYLE_USAGE(.BOTH.,#517670); +#517670 = SURFACE_SIDE_STYLE('',(#517671)); +#517671 = SURFACE_STYLE_FILL_AREA(#517672); +#517672 = FILL_AREA_STYLE('',(#517673)); +#517673 = FILL_AREA_STYLE_COLOUR('',#516784); +#517674 = STYLED_ITEM('color',(#517675),#429763); +#517675 = PRESENTATION_STYLE_ASSIGNMENT((#517676)); +#517676 = SURFACE_STYLE_USAGE(.BOTH.,#517677); +#517677 = SURFACE_SIDE_STYLE('',(#517678)); +#517678 = SURFACE_STYLE_FILL_AREA(#517679); +#517679 = FILL_AREA_STYLE('',(#517680)); +#517680 = FILL_AREA_STYLE_COLOUR('',#516784); +#517681 = STYLED_ITEM('color',(#517682),#429855); +#517682 = PRESENTATION_STYLE_ASSIGNMENT((#517683)); +#517683 = SURFACE_STYLE_USAGE(.BOTH.,#517684); +#517684 = SURFACE_SIDE_STYLE('',(#517685)); +#517685 = SURFACE_STYLE_FILL_AREA(#517686); +#517686 = FILL_AREA_STYLE('',(#517687)); +#517687 = FILL_AREA_STYLE_COLOUR('',#516784); +#517688 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #517689,#517698,#517707,#517716,#517725,#517734,#517743,#517752, + #517761,#517771,#517780,#517789,#517798,#517807,#517816,#517825, + #517834,#517843,#517852,#517861,#517870,#517879,#517888,#517897, + #517906,#517915,#517924,#517933,#517942,#517951,#517960,#517969, + #517978,#517987,#517996,#518005,#518014,#518023,#518032,#518041, + #518050,#518059,#518068,#518077,#518086,#518095,#518104,#518113, + #518122,#518131,#518140,#518149,#518158,#518167,#518176,#518185, + #518194,#518203,#518212,#518221,#518230,#518239,#518248,#518257, + #518266,#518275,#518284,#518293,#518302,#518311,#518320,#518329, + #518338,#518347,#518356,#518365,#518374,#518383,#518392,#518401, + #518410,#518419,#518428,#518437,#518446,#518455,#518464,#518473, + #518482,#518491,#518500,#518509,#518518,#518527,#518536,#518545, + #518554,#518563,#518572,#518581,#518590,#518599,#518608,#518617, + #518626,#518635,#518644,#518653,#518662,#518671,#518680,#518689, + #518698,#518707,#518716,#518725,#518734,#518743,#518752,#518761, + #518770,#518779,#518788,#518797,#518806,#518815,#518824,#518833, + #518842,#518851,#518860,#518869,#518878,#518887,#518896,#518905, + #518914,#518923,#518932,#518941,#518950,#518959,#518968,#518977, + #518986,#518995,#519004,#519013,#519022,#519031,#519040,#519049, + #519058,#519067,#519076,#519085,#519094,#519103,#519112,#519121, + #519130,#519139,#519148,#519157,#519166,#519175,#519184,#519193, + #519202,#519211,#519220,#519229,#519238,#519247,#519256,#519265, + #519274,#519283,#519292,#519301,#519310,#519319,#519328,#519337, + #519346,#519355,#519364,#519373,#519382,#519391,#519400,#519409, + #519418,#519427,#519436,#519445,#519454,#519463,#519472,#519481, + #519490,#519499,#519508,#519517,#519526,#519535,#519544,#519553, + #519562,#519571,#519580,#519589,#519598,#519607,#519616,#519625, + #519634,#519643,#519652,#519661,#519670,#519679,#519688,#519697, + #519706,#519715,#519724,#519733,#519742,#519751,#519760,#519769, + #519778,#519787,#519796,#519805,#519814,#519823,#519832,#519841, + #519850,#519859,#519868,#519877,#519886,#519895,#519904,#519913, + #519922,#519931,#519940,#519949,#519958,#519967,#519976,#519985, + #519994,#520003,#520012,#520021,#520030,#520039,#520048,#520057, + #520066,#520075,#520084,#520093,#520102,#520111,#520120,#520129, + #520138,#520147,#520156,#520165,#520174,#520183,#520192,#520201, + #520210,#520219,#520228,#520237,#520246,#520255,#520264,#520273, + #520282,#520291,#520300,#520309,#520318,#520327,#520336,#520345, + #520354,#520363,#520372,#520381,#520390,#520399,#520408,#520417, + #520426,#520435,#520444,#520453,#520462,#520471,#520480,#520489, + #520498,#520507,#520516,#520525,#520534,#520543,#520552,#520561, + #520570,#520579,#520588,#520597,#520606,#520615,#520624,#520633, + #520642,#520651,#520660,#520669,#520678,#520687,#520696,#520705, + #520714,#520723,#520732,#520741,#520750,#520759,#520768,#520777, + #520786,#520795,#520804,#520813,#520822,#520831),#8466); +#517689 = STYLED_ITEM('color',(#517690),#426); +#517690 = PRESENTATION_STYLE_ASSIGNMENT((#517691,#517696)); +#517691 = SURFACE_STYLE_USAGE(.BOTH.,#517692); +#517692 = SURFACE_SIDE_STYLE('',(#517693)); +#517693 = SURFACE_STYLE_FILL_AREA(#517694); +#517694 = FILL_AREA_STYLE('',(#517695)); +#517695 = FILL_AREA_STYLE_COLOUR('',#512501); +#517696 = CURVE_STYLE('',#517697,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517698 = STYLED_ITEM('color',(#517699),#466); +#517699 = PRESENTATION_STYLE_ASSIGNMENT((#517700,#517705)); +#517700 = SURFACE_STYLE_USAGE(.BOTH.,#517701); +#517701 = SURFACE_SIDE_STYLE('',(#517702)); +#517702 = SURFACE_STYLE_FILL_AREA(#517703); +#517703 = FILL_AREA_STYLE('',(#517704)); +#517704 = FILL_AREA_STYLE_COLOUR('',#512501); +#517705 = CURVE_STYLE('',#517706,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517707 = STYLED_ITEM('color',(#517708),#529); +#517708 = PRESENTATION_STYLE_ASSIGNMENT((#517709,#517714)); +#517709 = SURFACE_STYLE_USAGE(.BOTH.,#517710); +#517710 = SURFACE_SIDE_STYLE('',(#517711)); +#517711 = SURFACE_STYLE_FILL_AREA(#517712); +#517712 = FILL_AREA_STYLE('',(#517713)); +#517713 = FILL_AREA_STYLE_COLOUR('',#512501); +#517714 = CURVE_STYLE('',#517715,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517716 = STYLED_ITEM('color',(#517717),#592); +#517717 = PRESENTATION_STYLE_ASSIGNMENT((#517718,#517723)); +#517718 = SURFACE_STYLE_USAGE(.BOTH.,#517719); +#517719 = SURFACE_SIDE_STYLE('',(#517720)); +#517720 = SURFACE_STYLE_FILL_AREA(#517721); +#517721 = FILL_AREA_STYLE('',(#517722)); +#517722 = FILL_AREA_STYLE_COLOUR('',#512501); +#517723 = CURVE_STYLE('',#517724,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517725 = STYLED_ITEM('color',(#517726),#609); +#517726 = PRESENTATION_STYLE_ASSIGNMENT((#517727,#517732)); +#517727 = SURFACE_STYLE_USAGE(.BOTH.,#517728); +#517728 = SURFACE_SIDE_STYLE('',(#517729)); +#517729 = SURFACE_STYLE_FILL_AREA(#517730); +#517730 = FILL_AREA_STYLE('',(#517731)); +#517731 = FILL_AREA_STYLE_COLOUR('',#512501); +#517732 = CURVE_STYLE('',#517733,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517734 = STYLED_ITEM('color',(#517735),#966); +#517735 = PRESENTATION_STYLE_ASSIGNMENT((#517736,#517741)); +#517736 = SURFACE_STYLE_USAGE(.BOTH.,#517737); +#517737 = SURFACE_SIDE_STYLE('',(#517738)); +#517738 = SURFACE_STYLE_FILL_AREA(#517739); +#517739 = FILL_AREA_STYLE('',(#517740)); +#517740 = FILL_AREA_STYLE_COLOUR('',#512501); +#517741 = CURVE_STYLE('',#517742,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517743 = STYLED_ITEM('color',(#517744),#988); +#517744 = PRESENTATION_STYLE_ASSIGNMENT((#517745,#517750)); +#517745 = SURFACE_STYLE_USAGE(.BOTH.,#517746); +#517746 = SURFACE_SIDE_STYLE('',(#517747)); +#517747 = SURFACE_STYLE_FILL_AREA(#517748); +#517748 = FILL_AREA_STYLE('',(#517749)); +#517749 = FILL_AREA_STYLE_COLOUR('',#512501); +#517750 = CURVE_STYLE('',#517751,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517752 = STYLED_ITEM('color',(#517753),#1005); +#517753 = PRESENTATION_STYLE_ASSIGNMENT((#517754,#517759)); +#517754 = SURFACE_STYLE_USAGE(.BOTH.,#517755); +#517755 = SURFACE_SIDE_STYLE('',(#517756)); +#517756 = SURFACE_STYLE_FILL_AREA(#517757); +#517757 = FILL_AREA_STYLE('',(#517758)); +#517758 = FILL_AREA_STYLE_COLOUR('',#512501); +#517759 = CURVE_STYLE('',#517760,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517761 = OVER_RIDING_STYLED_ITEM('overriding color',(#517762),#1038, + #517752); +#517762 = PRESENTATION_STYLE_ASSIGNMENT((#517763,#517769)); +#517763 = SURFACE_STYLE_USAGE(.BOTH.,#517764); +#517764 = SURFACE_SIDE_STYLE('',(#517765)); +#517765 = SURFACE_STYLE_FILL_AREA(#517766); +#517766 = FILL_AREA_STYLE('',(#517767)); +#517767 = FILL_AREA_STYLE_COLOUR('',#517768); +#517768 = COLOUR_RGB('',0.858999988747,0.738000004258,0.496000005009); +#517769 = CURVE_STYLE('',#517770,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517770 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517771 = OVER_RIDING_STYLED_ITEM('overriding color',(#517772),#1070, + #517752); +#517772 = PRESENTATION_STYLE_ASSIGNMENT((#517773,#517778)); +#517773 = SURFACE_STYLE_USAGE(.BOTH.,#517774); +#517774 = SURFACE_SIDE_STYLE('',(#517775)); +#517775 = SURFACE_STYLE_FILL_AREA(#517776); +#517776 = FILL_AREA_STYLE('',(#517777)); +#517777 = FILL_AREA_STYLE_COLOUR('',#517768); +#517778 = CURVE_STYLE('',#517779,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517779 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517780 = OVER_RIDING_STYLED_ITEM('overriding color',(#517781),#1104, + #517752); +#517781 = PRESENTATION_STYLE_ASSIGNMENT((#517782,#517787)); +#517782 = SURFACE_STYLE_USAGE(.BOTH.,#517783); +#517783 = SURFACE_SIDE_STYLE('',(#517784)); +#517784 = SURFACE_STYLE_FILL_AREA(#517785); +#517785 = FILL_AREA_STYLE('',(#517786)); +#517786 = FILL_AREA_STYLE_COLOUR('',#517768); +#517787 = CURVE_STYLE('',#517788,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517788 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517789 = OVER_RIDING_STYLED_ITEM('overriding color',(#517790),#1136, + #517752); +#517790 = PRESENTATION_STYLE_ASSIGNMENT((#517791,#517796)); +#517791 = SURFACE_STYLE_USAGE(.BOTH.,#517792); +#517792 = SURFACE_SIDE_STYLE('',(#517793)); +#517793 = SURFACE_STYLE_FILL_AREA(#517794); +#517794 = FILL_AREA_STYLE('',(#517795)); +#517795 = FILL_AREA_STYLE_COLOUR('',#517768); +#517796 = CURVE_STYLE('',#517797,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517797 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517798 = OVER_RIDING_STYLED_ITEM('overriding color',(#517799),#1170, + #517752); +#517799 = PRESENTATION_STYLE_ASSIGNMENT((#517800,#517805)); +#517800 = SURFACE_STYLE_USAGE(.BOTH.,#517801); +#517801 = SURFACE_SIDE_STYLE('',(#517802)); +#517802 = SURFACE_STYLE_FILL_AREA(#517803); +#517803 = FILL_AREA_STYLE('',(#517804)); +#517804 = FILL_AREA_STYLE_COLOUR('',#517768); +#517805 = CURVE_STYLE('',#517806,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517806 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517807 = OVER_RIDING_STYLED_ITEM('overriding color',(#517808),#1202, + #517752); +#517808 = PRESENTATION_STYLE_ASSIGNMENT((#517809,#517814)); +#517809 = SURFACE_STYLE_USAGE(.BOTH.,#517810); +#517810 = SURFACE_SIDE_STYLE('',(#517811)); +#517811 = SURFACE_STYLE_FILL_AREA(#517812); +#517812 = FILL_AREA_STYLE('',(#517813)); +#517813 = FILL_AREA_STYLE_COLOUR('',#517768); +#517814 = CURVE_STYLE('',#517815,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517815 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517816 = OVER_RIDING_STYLED_ITEM('overriding color',(#517817),#1236, + #517752); +#517817 = PRESENTATION_STYLE_ASSIGNMENT((#517818,#517823)); +#517818 = SURFACE_STYLE_USAGE(.BOTH.,#517819); +#517819 = SURFACE_SIDE_STYLE('',(#517820)); +#517820 = SURFACE_STYLE_FILL_AREA(#517821); +#517821 = FILL_AREA_STYLE('',(#517822)); +#517822 = FILL_AREA_STYLE_COLOUR('',#517768); +#517823 = CURVE_STYLE('',#517824,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517824 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517825 = OVER_RIDING_STYLED_ITEM('overriding color',(#517826),#1268, + #517752); +#517826 = PRESENTATION_STYLE_ASSIGNMENT((#517827,#517832)); +#517827 = SURFACE_STYLE_USAGE(.BOTH.,#517828); +#517828 = SURFACE_SIDE_STYLE('',(#517829)); +#517829 = SURFACE_STYLE_FILL_AREA(#517830); +#517830 = FILL_AREA_STYLE('',(#517831)); +#517831 = FILL_AREA_STYLE_COLOUR('',#517768); +#517832 = CURVE_STYLE('',#517833,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517833 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517834 = OVER_RIDING_STYLED_ITEM('overriding color',(#517835),#1302, + #517752); +#517835 = PRESENTATION_STYLE_ASSIGNMENT((#517836,#517841)); +#517836 = SURFACE_STYLE_USAGE(.BOTH.,#517837); +#517837 = SURFACE_SIDE_STYLE('',(#517838)); +#517838 = SURFACE_STYLE_FILL_AREA(#517839); +#517839 = FILL_AREA_STYLE('',(#517840)); +#517840 = FILL_AREA_STYLE_COLOUR('',#517768); +#517841 = CURVE_STYLE('',#517842,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517842 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517843 = OVER_RIDING_STYLED_ITEM('overriding color',(#517844),#1334, + #517752); +#517844 = PRESENTATION_STYLE_ASSIGNMENT((#517845,#517850)); +#517845 = SURFACE_STYLE_USAGE(.BOTH.,#517846); +#517846 = SURFACE_SIDE_STYLE('',(#517847)); +#517847 = SURFACE_STYLE_FILL_AREA(#517848); +#517848 = FILL_AREA_STYLE('',(#517849)); +#517849 = FILL_AREA_STYLE_COLOUR('',#517768); +#517850 = CURVE_STYLE('',#517851,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517851 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517852 = OVER_RIDING_STYLED_ITEM('overriding color',(#517853),#1368, + #517752); +#517853 = PRESENTATION_STYLE_ASSIGNMENT((#517854,#517859)); +#517854 = SURFACE_STYLE_USAGE(.BOTH.,#517855); +#517855 = SURFACE_SIDE_STYLE('',(#517856)); +#517856 = SURFACE_STYLE_FILL_AREA(#517857); +#517857 = FILL_AREA_STYLE('',(#517858)); +#517858 = FILL_AREA_STYLE_COLOUR('',#517768); +#517859 = CURVE_STYLE('',#517860,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517861 = OVER_RIDING_STYLED_ITEM('overriding color',(#517862),#1400, + #517752); +#517862 = PRESENTATION_STYLE_ASSIGNMENT((#517863,#517868)); +#517863 = SURFACE_STYLE_USAGE(.BOTH.,#517864); +#517864 = SURFACE_SIDE_STYLE('',(#517865)); +#517865 = SURFACE_STYLE_FILL_AREA(#517866); +#517866 = FILL_AREA_STYLE('',(#517867)); +#517867 = FILL_AREA_STYLE_COLOUR('',#517768); +#517868 = CURVE_STYLE('',#517869,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517869 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517870 = OVER_RIDING_STYLED_ITEM('overriding color',(#517871),#1434, + #517752); +#517871 = PRESENTATION_STYLE_ASSIGNMENT((#517872,#517877)); +#517872 = SURFACE_STYLE_USAGE(.BOTH.,#517873); +#517873 = SURFACE_SIDE_STYLE('',(#517874)); +#517874 = SURFACE_STYLE_FILL_AREA(#517875); +#517875 = FILL_AREA_STYLE('',(#517876)); +#517876 = FILL_AREA_STYLE_COLOUR('',#517768); +#517877 = CURVE_STYLE('',#517878,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517878 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517879 = OVER_RIDING_STYLED_ITEM('overriding color',(#517880),#1466, + #517752); +#517880 = PRESENTATION_STYLE_ASSIGNMENT((#517881,#517886)); +#517881 = SURFACE_STYLE_USAGE(.BOTH.,#517882); +#517882 = SURFACE_SIDE_STYLE('',(#517883)); +#517883 = SURFACE_STYLE_FILL_AREA(#517884); +#517884 = FILL_AREA_STYLE('',(#517885)); +#517885 = FILL_AREA_STYLE_COLOUR('',#517768); +#517886 = CURVE_STYLE('',#517887,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517887 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517888 = OVER_RIDING_STYLED_ITEM('overriding color',(#517889),#1500, + #517752); +#517889 = PRESENTATION_STYLE_ASSIGNMENT((#517890,#517895)); +#517890 = SURFACE_STYLE_USAGE(.BOTH.,#517891); +#517891 = SURFACE_SIDE_STYLE('',(#517892)); +#517892 = SURFACE_STYLE_FILL_AREA(#517893); +#517893 = FILL_AREA_STYLE('',(#517894)); +#517894 = FILL_AREA_STYLE_COLOUR('',#517768); +#517895 = CURVE_STYLE('',#517896,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517896 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517897 = OVER_RIDING_STYLED_ITEM('overriding color',(#517898),#1532, + #517752); +#517898 = PRESENTATION_STYLE_ASSIGNMENT((#517899,#517904)); +#517899 = SURFACE_STYLE_USAGE(.BOTH.,#517900); +#517900 = SURFACE_SIDE_STYLE('',(#517901)); +#517901 = SURFACE_STYLE_FILL_AREA(#517902); +#517902 = FILL_AREA_STYLE('',(#517903)); +#517903 = FILL_AREA_STYLE_COLOUR('',#517768); +#517904 = CURVE_STYLE('',#517905,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517905 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517906 = OVER_RIDING_STYLED_ITEM('overriding color',(#517907),#1566, + #517752); +#517907 = PRESENTATION_STYLE_ASSIGNMENT((#517908,#517913)); +#517908 = SURFACE_STYLE_USAGE(.BOTH.,#517909); +#517909 = SURFACE_SIDE_STYLE('',(#517910)); +#517910 = SURFACE_STYLE_FILL_AREA(#517911); +#517911 = FILL_AREA_STYLE('',(#517912)); +#517912 = FILL_AREA_STYLE_COLOUR('',#517768); +#517913 = CURVE_STYLE('',#517914,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517914 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517915 = OVER_RIDING_STYLED_ITEM('overriding color',(#517916),#1598, + #517752); +#517916 = PRESENTATION_STYLE_ASSIGNMENT((#517917,#517922)); +#517917 = SURFACE_STYLE_USAGE(.BOTH.,#517918); +#517918 = SURFACE_SIDE_STYLE('',(#517919)); +#517919 = SURFACE_STYLE_FILL_AREA(#517920); +#517920 = FILL_AREA_STYLE('',(#517921)); +#517921 = FILL_AREA_STYLE_COLOUR('',#517768); +#517922 = CURVE_STYLE('',#517923,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517923 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517924 = OVER_RIDING_STYLED_ITEM('overriding color',(#517925),#1632, + #517752); +#517925 = PRESENTATION_STYLE_ASSIGNMENT((#517926,#517931)); +#517926 = SURFACE_STYLE_USAGE(.BOTH.,#517927); +#517927 = SURFACE_SIDE_STYLE('',(#517928)); +#517928 = SURFACE_STYLE_FILL_AREA(#517929); +#517929 = FILL_AREA_STYLE('',(#517930)); +#517930 = FILL_AREA_STYLE_COLOUR('',#517768); +#517931 = CURVE_STYLE('',#517932,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517932 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517933 = OVER_RIDING_STYLED_ITEM('overriding color',(#517934),#1664, + #517752); +#517934 = PRESENTATION_STYLE_ASSIGNMENT((#517935,#517940)); +#517935 = SURFACE_STYLE_USAGE(.BOTH.,#517936); +#517936 = SURFACE_SIDE_STYLE('',(#517937)); +#517937 = SURFACE_STYLE_FILL_AREA(#517938); +#517938 = FILL_AREA_STYLE('',(#517939)); +#517939 = FILL_AREA_STYLE_COLOUR('',#517768); +#517940 = CURVE_STYLE('',#517941,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#517941 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517942 = STYLED_ITEM('color',(#517943),#1682); +#517943 = PRESENTATION_STYLE_ASSIGNMENT((#517944,#517949)); +#517944 = SURFACE_STYLE_USAGE(.BOTH.,#517945); +#517945 = SURFACE_SIDE_STYLE('',(#517946)); +#517946 = SURFACE_STYLE_FILL_AREA(#517947); +#517947 = FILL_AREA_STYLE('',(#517948)); +#517948 = FILL_AREA_STYLE_COLOUR('',#512501); +#517949 = CURVE_STYLE('',#517950,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517950 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517951 = STYLED_ITEM('color',(#517952),#1694); +#517952 = PRESENTATION_STYLE_ASSIGNMENT((#517953,#517958)); +#517953 = SURFACE_STYLE_USAGE(.BOTH.,#517954); +#517954 = SURFACE_SIDE_STYLE('',(#517955)); +#517955 = SURFACE_STYLE_FILL_AREA(#517956); +#517956 = FILL_AREA_STYLE('',(#517957)); +#517957 = FILL_AREA_STYLE_COLOUR('',#512501); +#517958 = CURVE_STYLE('',#517959,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517959 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517960 = STYLED_ITEM('color',(#517961),#1706); +#517961 = PRESENTATION_STYLE_ASSIGNMENT((#517962,#517967)); +#517962 = SURFACE_STYLE_USAGE(.BOTH.,#517963); +#517963 = SURFACE_SIDE_STYLE('',(#517964)); +#517964 = SURFACE_STYLE_FILL_AREA(#517965); +#517965 = FILL_AREA_STYLE('',(#517966)); +#517966 = FILL_AREA_STYLE_COLOUR('',#512501); +#517967 = CURVE_STYLE('',#517968,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517968 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517969 = STYLED_ITEM('color',(#517970),#1737); +#517970 = PRESENTATION_STYLE_ASSIGNMENT((#517971,#517976)); +#517971 = SURFACE_STYLE_USAGE(.BOTH.,#517972); +#517972 = SURFACE_SIDE_STYLE('',(#517973)); +#517973 = SURFACE_STYLE_FILL_AREA(#517974); +#517974 = FILL_AREA_STYLE('',(#517975)); +#517975 = FILL_AREA_STYLE_COLOUR('',#512501); +#517976 = CURVE_STYLE('',#517977,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517977 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517978 = STYLED_ITEM('color',(#517979),#1761); +#517979 = PRESENTATION_STYLE_ASSIGNMENT((#517980,#517985)); +#517980 = SURFACE_STYLE_USAGE(.BOTH.,#517981); +#517981 = SURFACE_SIDE_STYLE('',(#517982)); +#517982 = SURFACE_STYLE_FILL_AREA(#517983); +#517983 = FILL_AREA_STYLE('',(#517984)); +#517984 = FILL_AREA_STYLE_COLOUR('',#512501); +#517985 = CURVE_STYLE('',#517986,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517986 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517987 = STYLED_ITEM('color',(#517988),#1785); +#517988 = PRESENTATION_STYLE_ASSIGNMENT((#517989,#517994)); +#517989 = SURFACE_STYLE_USAGE(.BOTH.,#517990); +#517990 = SURFACE_SIDE_STYLE('',(#517991)); +#517991 = SURFACE_STYLE_FILL_AREA(#517992); +#517992 = FILL_AREA_STYLE('',(#517993)); +#517993 = FILL_AREA_STYLE_COLOUR('',#512501); +#517994 = CURVE_STYLE('',#517995,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#517995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#517996 = STYLED_ITEM('color',(#517997),#1802); +#517997 = PRESENTATION_STYLE_ASSIGNMENT((#517998,#518003)); +#517998 = SURFACE_STYLE_USAGE(.BOTH.,#517999); +#517999 = SURFACE_SIDE_STYLE('',(#518000)); +#518000 = SURFACE_STYLE_FILL_AREA(#518001); +#518001 = FILL_AREA_STYLE('',(#518002)); +#518002 = FILL_AREA_STYLE_COLOUR('',#512501); +#518003 = CURVE_STYLE('',#518004,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518004 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518005 = STYLED_ITEM('color',(#518006),#1833); +#518006 = PRESENTATION_STYLE_ASSIGNMENT((#518007,#518012)); +#518007 = SURFACE_STYLE_USAGE(.BOTH.,#518008); +#518008 = SURFACE_SIDE_STYLE('',(#518009)); +#518009 = SURFACE_STYLE_FILL_AREA(#518010); +#518010 = FILL_AREA_STYLE('',(#518011)); +#518011 = FILL_AREA_STYLE_COLOUR('',#512501); +#518012 = CURVE_STYLE('',#518013,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518013 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518014 = STYLED_ITEM('color',(#518015),#1857); +#518015 = PRESENTATION_STYLE_ASSIGNMENT((#518016,#518021)); +#518016 = SURFACE_STYLE_USAGE(.BOTH.,#518017); +#518017 = SURFACE_SIDE_STYLE('',(#518018)); +#518018 = SURFACE_STYLE_FILL_AREA(#518019); +#518019 = FILL_AREA_STYLE('',(#518020)); +#518020 = FILL_AREA_STYLE_COLOUR('',#512501); +#518021 = CURVE_STYLE('',#518022,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518022 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518023 = STYLED_ITEM('color',(#518024),#1881); +#518024 = PRESENTATION_STYLE_ASSIGNMENT((#518025,#518030)); +#518025 = SURFACE_STYLE_USAGE(.BOTH.,#518026); +#518026 = SURFACE_SIDE_STYLE('',(#518027)); +#518027 = SURFACE_STYLE_FILL_AREA(#518028); +#518028 = FILL_AREA_STYLE('',(#518029)); +#518029 = FILL_AREA_STYLE_COLOUR('',#512501); +#518030 = CURVE_STYLE('',#518031,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518031 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518032 = STYLED_ITEM('color',(#518033),#1898); +#518033 = PRESENTATION_STYLE_ASSIGNMENT((#518034,#518039)); +#518034 = SURFACE_STYLE_USAGE(.BOTH.,#518035); +#518035 = SURFACE_SIDE_STYLE('',(#518036)); +#518036 = SURFACE_STYLE_FILL_AREA(#518037); +#518037 = FILL_AREA_STYLE('',(#518038)); +#518038 = FILL_AREA_STYLE_COLOUR('',#512501); +#518039 = CURVE_STYLE('',#518040,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518040 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518041 = STYLED_ITEM('color',(#518042),#1929); +#518042 = PRESENTATION_STYLE_ASSIGNMENT((#518043,#518048)); +#518043 = SURFACE_STYLE_USAGE(.BOTH.,#518044); +#518044 = SURFACE_SIDE_STYLE('',(#518045)); +#518045 = SURFACE_STYLE_FILL_AREA(#518046); +#518046 = FILL_AREA_STYLE('',(#518047)); +#518047 = FILL_AREA_STYLE_COLOUR('',#512501); +#518048 = CURVE_STYLE('',#518049,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518049 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518050 = STYLED_ITEM('color',(#518051),#1953); +#518051 = PRESENTATION_STYLE_ASSIGNMENT((#518052,#518057)); +#518052 = SURFACE_STYLE_USAGE(.BOTH.,#518053); +#518053 = SURFACE_SIDE_STYLE('',(#518054)); +#518054 = SURFACE_STYLE_FILL_AREA(#518055); +#518055 = FILL_AREA_STYLE('',(#518056)); +#518056 = FILL_AREA_STYLE_COLOUR('',#512501); +#518057 = CURVE_STYLE('',#518058,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518058 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518059 = STYLED_ITEM('color',(#518060),#1977); +#518060 = PRESENTATION_STYLE_ASSIGNMENT((#518061,#518066)); +#518061 = SURFACE_STYLE_USAGE(.BOTH.,#518062); +#518062 = SURFACE_SIDE_STYLE('',(#518063)); +#518063 = SURFACE_STYLE_FILL_AREA(#518064); +#518064 = FILL_AREA_STYLE('',(#518065)); +#518065 = FILL_AREA_STYLE_COLOUR('',#512501); +#518066 = CURVE_STYLE('',#518067,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518067 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518068 = STYLED_ITEM('color',(#518069),#1994); +#518069 = PRESENTATION_STYLE_ASSIGNMENT((#518070,#518075)); +#518070 = SURFACE_STYLE_USAGE(.BOTH.,#518071); +#518071 = SURFACE_SIDE_STYLE('',(#518072)); +#518072 = SURFACE_STYLE_FILL_AREA(#518073); +#518073 = FILL_AREA_STYLE('',(#518074)); +#518074 = FILL_AREA_STYLE_COLOUR('',#512501); +#518075 = CURVE_STYLE('',#518076,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518076 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518077 = STYLED_ITEM('color',(#518078),#2025); +#518078 = PRESENTATION_STYLE_ASSIGNMENT((#518079,#518084)); +#518079 = SURFACE_STYLE_USAGE(.BOTH.,#518080); +#518080 = SURFACE_SIDE_STYLE('',(#518081)); +#518081 = SURFACE_STYLE_FILL_AREA(#518082); +#518082 = FILL_AREA_STYLE('',(#518083)); +#518083 = FILL_AREA_STYLE_COLOUR('',#512501); +#518084 = CURVE_STYLE('',#518085,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518085 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518086 = STYLED_ITEM('color',(#518087),#2049); +#518087 = PRESENTATION_STYLE_ASSIGNMENT((#518088,#518093)); +#518088 = SURFACE_STYLE_USAGE(.BOTH.,#518089); +#518089 = SURFACE_SIDE_STYLE('',(#518090)); +#518090 = SURFACE_STYLE_FILL_AREA(#518091); +#518091 = FILL_AREA_STYLE('',(#518092)); +#518092 = FILL_AREA_STYLE_COLOUR('',#512501); +#518093 = CURVE_STYLE('',#518094,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518094 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518095 = STYLED_ITEM('color',(#518096),#2073); +#518096 = PRESENTATION_STYLE_ASSIGNMENT((#518097,#518102)); +#518097 = SURFACE_STYLE_USAGE(.BOTH.,#518098); +#518098 = SURFACE_SIDE_STYLE('',(#518099)); +#518099 = SURFACE_STYLE_FILL_AREA(#518100); +#518100 = FILL_AREA_STYLE('',(#518101)); +#518101 = FILL_AREA_STYLE_COLOUR('',#512501); +#518102 = CURVE_STYLE('',#518103,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518103 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518104 = STYLED_ITEM('color',(#518105),#2090); +#518105 = PRESENTATION_STYLE_ASSIGNMENT((#518106,#518111)); +#518106 = SURFACE_STYLE_USAGE(.BOTH.,#518107); +#518107 = SURFACE_SIDE_STYLE('',(#518108)); +#518108 = SURFACE_STYLE_FILL_AREA(#518109); +#518109 = FILL_AREA_STYLE('',(#518110)); +#518110 = FILL_AREA_STYLE_COLOUR('',#512501); +#518111 = CURVE_STYLE('',#518112,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518112 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518113 = STYLED_ITEM('color',(#518114),#2121); +#518114 = PRESENTATION_STYLE_ASSIGNMENT((#518115,#518120)); +#518115 = SURFACE_STYLE_USAGE(.BOTH.,#518116); +#518116 = SURFACE_SIDE_STYLE('',(#518117)); +#518117 = SURFACE_STYLE_FILL_AREA(#518118); +#518118 = FILL_AREA_STYLE('',(#518119)); +#518119 = FILL_AREA_STYLE_COLOUR('',#512501); +#518120 = CURVE_STYLE('',#518121,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518121 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518122 = STYLED_ITEM('color',(#518123),#2145); +#518123 = PRESENTATION_STYLE_ASSIGNMENT((#518124,#518129)); +#518124 = SURFACE_STYLE_USAGE(.BOTH.,#518125); +#518125 = SURFACE_SIDE_STYLE('',(#518126)); +#518126 = SURFACE_STYLE_FILL_AREA(#518127); +#518127 = FILL_AREA_STYLE('',(#518128)); +#518128 = FILL_AREA_STYLE_COLOUR('',#512501); +#518129 = CURVE_STYLE('',#518130,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518131 = STYLED_ITEM('color',(#518132),#2169); +#518132 = PRESENTATION_STYLE_ASSIGNMENT((#518133,#518138)); +#518133 = SURFACE_STYLE_USAGE(.BOTH.,#518134); +#518134 = SURFACE_SIDE_STYLE('',(#518135)); +#518135 = SURFACE_STYLE_FILL_AREA(#518136); +#518136 = FILL_AREA_STYLE('',(#518137)); +#518137 = FILL_AREA_STYLE_COLOUR('',#512501); +#518138 = CURVE_STYLE('',#518139,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518139 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518140 = STYLED_ITEM('color',(#518141),#2186); +#518141 = PRESENTATION_STYLE_ASSIGNMENT((#518142,#518147)); +#518142 = SURFACE_STYLE_USAGE(.BOTH.,#518143); +#518143 = SURFACE_SIDE_STYLE('',(#518144)); +#518144 = SURFACE_STYLE_FILL_AREA(#518145); +#518145 = FILL_AREA_STYLE('',(#518146)); +#518146 = FILL_AREA_STYLE_COLOUR('',#512501); +#518147 = CURVE_STYLE('',#518148,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518148 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518149 = STYLED_ITEM('color',(#518150),#2217); +#518150 = PRESENTATION_STYLE_ASSIGNMENT((#518151,#518156)); +#518151 = SURFACE_STYLE_USAGE(.BOTH.,#518152); +#518152 = SURFACE_SIDE_STYLE('',(#518153)); +#518153 = SURFACE_STYLE_FILL_AREA(#518154); +#518154 = FILL_AREA_STYLE('',(#518155)); +#518155 = FILL_AREA_STYLE_COLOUR('',#512501); +#518156 = CURVE_STYLE('',#518157,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518157 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518158 = STYLED_ITEM('color',(#518159),#2241); +#518159 = PRESENTATION_STYLE_ASSIGNMENT((#518160,#518165)); +#518160 = SURFACE_STYLE_USAGE(.BOTH.,#518161); +#518161 = SURFACE_SIDE_STYLE('',(#518162)); +#518162 = SURFACE_STYLE_FILL_AREA(#518163); +#518163 = FILL_AREA_STYLE('',(#518164)); +#518164 = FILL_AREA_STYLE_COLOUR('',#512501); +#518165 = CURVE_STYLE('',#518166,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518166 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518167 = STYLED_ITEM('color',(#518168),#2265); +#518168 = PRESENTATION_STYLE_ASSIGNMENT((#518169,#518174)); +#518169 = SURFACE_STYLE_USAGE(.BOTH.,#518170); +#518170 = SURFACE_SIDE_STYLE('',(#518171)); +#518171 = SURFACE_STYLE_FILL_AREA(#518172); +#518172 = FILL_AREA_STYLE('',(#518173)); +#518173 = FILL_AREA_STYLE_COLOUR('',#512501); +#518174 = CURVE_STYLE('',#518175,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518175 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518176 = STYLED_ITEM('color',(#518177),#2282); +#518177 = PRESENTATION_STYLE_ASSIGNMENT((#518178,#518183)); +#518178 = SURFACE_STYLE_USAGE(.BOTH.,#518179); +#518179 = SURFACE_SIDE_STYLE('',(#518180)); +#518180 = SURFACE_STYLE_FILL_AREA(#518181); +#518181 = FILL_AREA_STYLE('',(#518182)); +#518182 = FILL_AREA_STYLE_COLOUR('',#512501); +#518183 = CURVE_STYLE('',#518184,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518184 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518185 = STYLED_ITEM('color',(#518186),#2313); +#518186 = PRESENTATION_STYLE_ASSIGNMENT((#518187,#518192)); +#518187 = SURFACE_STYLE_USAGE(.BOTH.,#518188); +#518188 = SURFACE_SIDE_STYLE('',(#518189)); +#518189 = SURFACE_STYLE_FILL_AREA(#518190); +#518190 = FILL_AREA_STYLE('',(#518191)); +#518191 = FILL_AREA_STYLE_COLOUR('',#512501); +#518192 = CURVE_STYLE('',#518193,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518193 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518194 = STYLED_ITEM('color',(#518195),#2337); +#518195 = PRESENTATION_STYLE_ASSIGNMENT((#518196,#518201)); +#518196 = SURFACE_STYLE_USAGE(.BOTH.,#518197); +#518197 = SURFACE_SIDE_STYLE('',(#518198)); +#518198 = SURFACE_STYLE_FILL_AREA(#518199); +#518199 = FILL_AREA_STYLE('',(#518200)); +#518200 = FILL_AREA_STYLE_COLOUR('',#512501); +#518201 = CURVE_STYLE('',#518202,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518202 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518203 = STYLED_ITEM('color',(#518204),#2361); +#518204 = PRESENTATION_STYLE_ASSIGNMENT((#518205,#518210)); +#518205 = SURFACE_STYLE_USAGE(.BOTH.,#518206); +#518206 = SURFACE_SIDE_STYLE('',(#518207)); +#518207 = SURFACE_STYLE_FILL_AREA(#518208); +#518208 = FILL_AREA_STYLE('',(#518209)); +#518209 = FILL_AREA_STYLE_COLOUR('',#512501); +#518210 = CURVE_STYLE('',#518211,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518211 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518212 = STYLED_ITEM('color',(#518213),#2378); +#518213 = PRESENTATION_STYLE_ASSIGNMENT((#518214,#518219)); +#518214 = SURFACE_STYLE_USAGE(.BOTH.,#518215); +#518215 = SURFACE_SIDE_STYLE('',(#518216)); +#518216 = SURFACE_STYLE_FILL_AREA(#518217); +#518217 = FILL_AREA_STYLE('',(#518218)); +#518218 = FILL_AREA_STYLE_COLOUR('',#512501); +#518219 = CURVE_STYLE('',#518220,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518220 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518221 = STYLED_ITEM('color',(#518222),#2409); +#518222 = PRESENTATION_STYLE_ASSIGNMENT((#518223,#518228)); +#518223 = SURFACE_STYLE_USAGE(.BOTH.,#518224); +#518224 = SURFACE_SIDE_STYLE('',(#518225)); +#518225 = SURFACE_STYLE_FILL_AREA(#518226); +#518226 = FILL_AREA_STYLE('',(#518227)); +#518227 = FILL_AREA_STYLE_COLOUR('',#512501); +#518228 = CURVE_STYLE('',#518229,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518229 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518230 = STYLED_ITEM('color',(#518231),#2433); +#518231 = PRESENTATION_STYLE_ASSIGNMENT((#518232,#518237)); +#518232 = SURFACE_STYLE_USAGE(.BOTH.,#518233); +#518233 = SURFACE_SIDE_STYLE('',(#518234)); +#518234 = SURFACE_STYLE_FILL_AREA(#518235); +#518235 = FILL_AREA_STYLE('',(#518236)); +#518236 = FILL_AREA_STYLE_COLOUR('',#512501); +#518237 = CURVE_STYLE('',#518238,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518238 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518239 = STYLED_ITEM('color',(#518240),#2457); +#518240 = PRESENTATION_STYLE_ASSIGNMENT((#518241,#518246)); +#518241 = SURFACE_STYLE_USAGE(.BOTH.,#518242); +#518242 = SURFACE_SIDE_STYLE('',(#518243)); +#518243 = SURFACE_STYLE_FILL_AREA(#518244); +#518244 = FILL_AREA_STYLE('',(#518245)); +#518245 = FILL_AREA_STYLE_COLOUR('',#512501); +#518246 = CURVE_STYLE('',#518247,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518247 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518248 = STYLED_ITEM('color',(#518249),#2474); +#518249 = PRESENTATION_STYLE_ASSIGNMENT((#518250,#518255)); +#518250 = SURFACE_STYLE_USAGE(.BOTH.,#518251); +#518251 = SURFACE_SIDE_STYLE('',(#518252)); +#518252 = SURFACE_STYLE_FILL_AREA(#518253); +#518253 = FILL_AREA_STYLE('',(#518254)); +#518254 = FILL_AREA_STYLE_COLOUR('',#512501); +#518255 = CURVE_STYLE('',#518256,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518256 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518257 = STYLED_ITEM('color',(#518258),#2505); +#518258 = PRESENTATION_STYLE_ASSIGNMENT((#518259,#518264)); +#518259 = SURFACE_STYLE_USAGE(.BOTH.,#518260); +#518260 = SURFACE_SIDE_STYLE('',(#518261)); +#518261 = SURFACE_STYLE_FILL_AREA(#518262); +#518262 = FILL_AREA_STYLE('',(#518263)); +#518263 = FILL_AREA_STYLE_COLOUR('',#512501); +#518264 = CURVE_STYLE('',#518265,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518265 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518266 = STYLED_ITEM('color',(#518267),#2529); +#518267 = PRESENTATION_STYLE_ASSIGNMENT((#518268,#518273)); +#518268 = SURFACE_STYLE_USAGE(.BOTH.,#518269); +#518269 = SURFACE_SIDE_STYLE('',(#518270)); +#518270 = SURFACE_STYLE_FILL_AREA(#518271); +#518271 = FILL_AREA_STYLE('',(#518272)); +#518272 = FILL_AREA_STYLE_COLOUR('',#512501); +#518273 = CURVE_STYLE('',#518274,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518274 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518275 = STYLED_ITEM('color',(#518276),#2553); +#518276 = PRESENTATION_STYLE_ASSIGNMENT((#518277,#518282)); +#518277 = SURFACE_STYLE_USAGE(.BOTH.,#518278); +#518278 = SURFACE_SIDE_STYLE('',(#518279)); +#518279 = SURFACE_STYLE_FILL_AREA(#518280); +#518280 = FILL_AREA_STYLE('',(#518281)); +#518281 = FILL_AREA_STYLE_COLOUR('',#512501); +#518282 = CURVE_STYLE('',#518283,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518283 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518284 = STYLED_ITEM('color',(#518285),#2570); +#518285 = PRESENTATION_STYLE_ASSIGNMENT((#518286,#518291)); +#518286 = SURFACE_STYLE_USAGE(.BOTH.,#518287); +#518287 = SURFACE_SIDE_STYLE('',(#518288)); +#518288 = SURFACE_STYLE_FILL_AREA(#518289); +#518289 = FILL_AREA_STYLE('',(#518290)); +#518290 = FILL_AREA_STYLE_COLOUR('',#512501); +#518291 = CURVE_STYLE('',#518292,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518292 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518293 = STYLED_ITEM('color',(#518294),#2601); +#518294 = PRESENTATION_STYLE_ASSIGNMENT((#518295,#518300)); +#518295 = SURFACE_STYLE_USAGE(.BOTH.,#518296); +#518296 = SURFACE_SIDE_STYLE('',(#518297)); +#518297 = SURFACE_STYLE_FILL_AREA(#518298); +#518298 = FILL_AREA_STYLE('',(#518299)); +#518299 = FILL_AREA_STYLE_COLOUR('',#512501); +#518300 = CURVE_STYLE('',#518301,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518301 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518302 = STYLED_ITEM('color',(#518303),#2625); +#518303 = PRESENTATION_STYLE_ASSIGNMENT((#518304,#518309)); +#518304 = SURFACE_STYLE_USAGE(.BOTH.,#518305); +#518305 = SURFACE_SIDE_STYLE('',(#518306)); +#518306 = SURFACE_STYLE_FILL_AREA(#518307); +#518307 = FILL_AREA_STYLE('',(#518308)); +#518308 = FILL_AREA_STYLE_COLOUR('',#512501); +#518309 = CURVE_STYLE('',#518310,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518310 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518311 = STYLED_ITEM('color',(#518312),#2649); +#518312 = PRESENTATION_STYLE_ASSIGNMENT((#518313,#518318)); +#518313 = SURFACE_STYLE_USAGE(.BOTH.,#518314); +#518314 = SURFACE_SIDE_STYLE('',(#518315)); +#518315 = SURFACE_STYLE_FILL_AREA(#518316); +#518316 = FILL_AREA_STYLE('',(#518317)); +#518317 = FILL_AREA_STYLE_COLOUR('',#512501); +#518318 = CURVE_STYLE('',#518319,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518319 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518320 = STYLED_ITEM('color',(#518321),#2666); +#518321 = PRESENTATION_STYLE_ASSIGNMENT((#518322,#518327)); +#518322 = SURFACE_STYLE_USAGE(.BOTH.,#518323); +#518323 = SURFACE_SIDE_STYLE('',(#518324)); +#518324 = SURFACE_STYLE_FILL_AREA(#518325); +#518325 = FILL_AREA_STYLE('',(#518326)); +#518326 = FILL_AREA_STYLE_COLOUR('',#517768); +#518327 = CURVE_STYLE('',#518328,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518328 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518329 = STYLED_ITEM('color',(#518330),#2683); +#518330 = PRESENTATION_STYLE_ASSIGNMENT((#518331,#518336)); +#518331 = SURFACE_STYLE_USAGE(.BOTH.,#518332); +#518332 = SURFACE_SIDE_STYLE('',(#518333)); +#518333 = SURFACE_STYLE_FILL_AREA(#518334); +#518334 = FILL_AREA_STYLE('',(#518335)); +#518335 = FILL_AREA_STYLE_COLOUR('',#517768); +#518336 = CURVE_STYLE('',#518337,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518337 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518338 = STYLED_ITEM('color',(#518339),#2730); +#518339 = PRESENTATION_STYLE_ASSIGNMENT((#518340,#518345)); +#518340 = SURFACE_STYLE_USAGE(.BOTH.,#518341); +#518341 = SURFACE_SIDE_STYLE('',(#518342)); +#518342 = SURFACE_STYLE_FILL_AREA(#518343); +#518343 = FILL_AREA_STYLE('',(#518344)); +#518344 = FILL_AREA_STYLE_COLOUR('',#517768); +#518345 = CURVE_STYLE('',#518346,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518346 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518347 = STYLED_ITEM('color',(#518348),#2747); +#518348 = PRESENTATION_STYLE_ASSIGNMENT((#518349,#518354)); +#518349 = SURFACE_STYLE_USAGE(.BOTH.,#518350); +#518350 = SURFACE_SIDE_STYLE('',(#518351)); +#518351 = SURFACE_STYLE_FILL_AREA(#518352); +#518352 = FILL_AREA_STYLE('',(#518353)); +#518353 = FILL_AREA_STYLE_COLOUR('',#517768); +#518354 = CURVE_STYLE('',#518355,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518355 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518356 = STYLED_ITEM('color',(#518357),#2794); +#518357 = PRESENTATION_STYLE_ASSIGNMENT((#518358,#518363)); +#518358 = SURFACE_STYLE_USAGE(.BOTH.,#518359); +#518359 = SURFACE_SIDE_STYLE('',(#518360)); +#518360 = SURFACE_STYLE_FILL_AREA(#518361); +#518361 = FILL_AREA_STYLE('',(#518362)); +#518362 = FILL_AREA_STYLE_COLOUR('',#517768); +#518363 = CURVE_STYLE('',#518364,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518364 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518365 = STYLED_ITEM('color',(#518366),#2811); +#518366 = PRESENTATION_STYLE_ASSIGNMENT((#518367,#518372)); +#518367 = SURFACE_STYLE_USAGE(.BOTH.,#518368); +#518368 = SURFACE_SIDE_STYLE('',(#518369)); +#518369 = SURFACE_STYLE_FILL_AREA(#518370); +#518370 = FILL_AREA_STYLE('',(#518371)); +#518371 = FILL_AREA_STYLE_COLOUR('',#517768); +#518372 = CURVE_STYLE('',#518373,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518373 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518374 = STYLED_ITEM('color',(#518375),#2858); +#518375 = PRESENTATION_STYLE_ASSIGNMENT((#518376,#518381)); +#518376 = SURFACE_STYLE_USAGE(.BOTH.,#518377); +#518377 = SURFACE_SIDE_STYLE('',(#518378)); +#518378 = SURFACE_STYLE_FILL_AREA(#518379); +#518379 = FILL_AREA_STYLE('',(#518380)); +#518380 = FILL_AREA_STYLE_COLOUR('',#517768); +#518381 = CURVE_STYLE('',#518382,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518382 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518383 = STYLED_ITEM('color',(#518384),#2875); +#518384 = PRESENTATION_STYLE_ASSIGNMENT((#518385,#518390)); +#518385 = SURFACE_STYLE_USAGE(.BOTH.,#518386); +#518386 = SURFACE_SIDE_STYLE('',(#518387)); +#518387 = SURFACE_STYLE_FILL_AREA(#518388); +#518388 = FILL_AREA_STYLE('',(#518389)); +#518389 = FILL_AREA_STYLE_COLOUR('',#517768); +#518390 = CURVE_STYLE('',#518391,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518391 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518392 = STYLED_ITEM('color',(#518393),#2922); +#518393 = PRESENTATION_STYLE_ASSIGNMENT((#518394,#518399)); +#518394 = SURFACE_STYLE_USAGE(.BOTH.,#518395); +#518395 = SURFACE_SIDE_STYLE('',(#518396)); +#518396 = SURFACE_STYLE_FILL_AREA(#518397); +#518397 = FILL_AREA_STYLE('',(#518398)); +#518398 = FILL_AREA_STYLE_COLOUR('',#517768); +#518399 = CURVE_STYLE('',#518400,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518401 = STYLED_ITEM('color',(#518402),#2939); +#518402 = PRESENTATION_STYLE_ASSIGNMENT((#518403,#518408)); +#518403 = SURFACE_STYLE_USAGE(.BOTH.,#518404); +#518404 = SURFACE_SIDE_STYLE('',(#518405)); +#518405 = SURFACE_STYLE_FILL_AREA(#518406); +#518406 = FILL_AREA_STYLE('',(#518407)); +#518407 = FILL_AREA_STYLE_COLOUR('',#517768); +#518408 = CURVE_STYLE('',#518409,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518409 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518410 = STYLED_ITEM('color',(#518411),#2986); +#518411 = PRESENTATION_STYLE_ASSIGNMENT((#518412,#518417)); +#518412 = SURFACE_STYLE_USAGE(.BOTH.,#518413); +#518413 = SURFACE_SIDE_STYLE('',(#518414)); +#518414 = SURFACE_STYLE_FILL_AREA(#518415); +#518415 = FILL_AREA_STYLE('',(#518416)); +#518416 = FILL_AREA_STYLE_COLOUR('',#517768); +#518417 = CURVE_STYLE('',#518418,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518418 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518419 = STYLED_ITEM('color',(#518420),#3003); +#518420 = PRESENTATION_STYLE_ASSIGNMENT((#518421,#518426)); +#518421 = SURFACE_STYLE_USAGE(.BOTH.,#518422); +#518422 = SURFACE_SIDE_STYLE('',(#518423)); +#518423 = SURFACE_STYLE_FILL_AREA(#518424); +#518424 = FILL_AREA_STYLE('',(#518425)); +#518425 = FILL_AREA_STYLE_COLOUR('',#517768); +#518426 = CURVE_STYLE('',#518427,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518427 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518428 = STYLED_ITEM('color',(#518429),#3050); +#518429 = PRESENTATION_STYLE_ASSIGNMENT((#518430,#518435)); +#518430 = SURFACE_STYLE_USAGE(.BOTH.,#518431); +#518431 = SURFACE_SIDE_STYLE('',(#518432)); +#518432 = SURFACE_STYLE_FILL_AREA(#518433); +#518433 = FILL_AREA_STYLE('',(#518434)); +#518434 = FILL_AREA_STYLE_COLOUR('',#517768); +#518435 = CURVE_STYLE('',#518436,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518436 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518437 = STYLED_ITEM('color',(#518438),#3067); +#518438 = PRESENTATION_STYLE_ASSIGNMENT((#518439,#518444)); +#518439 = SURFACE_STYLE_USAGE(.BOTH.,#518440); +#518440 = SURFACE_SIDE_STYLE('',(#518441)); +#518441 = SURFACE_STYLE_FILL_AREA(#518442); +#518442 = FILL_AREA_STYLE('',(#518443)); +#518443 = FILL_AREA_STYLE_COLOUR('',#517768); +#518444 = CURVE_STYLE('',#518445,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518445 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518446 = STYLED_ITEM('color',(#518447),#3114); +#518447 = PRESENTATION_STYLE_ASSIGNMENT((#518448,#518453)); +#518448 = SURFACE_STYLE_USAGE(.BOTH.,#518449); +#518449 = SURFACE_SIDE_STYLE('',(#518450)); +#518450 = SURFACE_STYLE_FILL_AREA(#518451); +#518451 = FILL_AREA_STYLE('',(#518452)); +#518452 = FILL_AREA_STYLE_COLOUR('',#517768); +#518453 = CURVE_STYLE('',#518454,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518454 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518455 = STYLED_ITEM('color',(#518456),#3131); +#518456 = PRESENTATION_STYLE_ASSIGNMENT((#518457,#518462)); +#518457 = SURFACE_STYLE_USAGE(.BOTH.,#518458); +#518458 = SURFACE_SIDE_STYLE('',(#518459)); +#518459 = SURFACE_STYLE_FILL_AREA(#518460); +#518460 = FILL_AREA_STYLE('',(#518461)); +#518461 = FILL_AREA_STYLE_COLOUR('',#517768); +#518462 = CURVE_STYLE('',#518463,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518463 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518464 = STYLED_ITEM('color',(#518465),#3178); +#518465 = PRESENTATION_STYLE_ASSIGNMENT((#518466,#518471)); +#518466 = SURFACE_STYLE_USAGE(.BOTH.,#518467); +#518467 = SURFACE_SIDE_STYLE('',(#518468)); +#518468 = SURFACE_STYLE_FILL_AREA(#518469); +#518469 = FILL_AREA_STYLE('',(#518470)); +#518470 = FILL_AREA_STYLE_COLOUR('',#517768); +#518471 = CURVE_STYLE('',#518472,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518472 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518473 = STYLED_ITEM('color',(#518474),#3195); +#518474 = PRESENTATION_STYLE_ASSIGNMENT((#518475,#518480)); +#518475 = SURFACE_STYLE_USAGE(.BOTH.,#518476); +#518476 = SURFACE_SIDE_STYLE('',(#518477)); +#518477 = SURFACE_STYLE_FILL_AREA(#518478); +#518478 = FILL_AREA_STYLE('',(#518479)); +#518479 = FILL_AREA_STYLE_COLOUR('',#517768); +#518480 = CURVE_STYLE('',#518481,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518481 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518482 = STYLED_ITEM('color',(#518483),#3242); +#518483 = PRESENTATION_STYLE_ASSIGNMENT((#518484,#518489)); +#518484 = SURFACE_STYLE_USAGE(.BOTH.,#518485); +#518485 = SURFACE_SIDE_STYLE('',(#518486)); +#518486 = SURFACE_STYLE_FILL_AREA(#518487); +#518487 = FILL_AREA_STYLE('',(#518488)); +#518488 = FILL_AREA_STYLE_COLOUR('',#517768); +#518489 = CURVE_STYLE('',#518490,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518490 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518491 = STYLED_ITEM('color',(#518492),#3259); +#518492 = PRESENTATION_STYLE_ASSIGNMENT((#518493,#518498)); +#518493 = SURFACE_STYLE_USAGE(.BOTH.,#518494); +#518494 = SURFACE_SIDE_STYLE('',(#518495)); +#518495 = SURFACE_STYLE_FILL_AREA(#518496); +#518496 = FILL_AREA_STYLE('',(#518497)); +#518497 = FILL_AREA_STYLE_COLOUR('',#517768); +#518498 = CURVE_STYLE('',#518499,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518499 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518500 = STYLED_ITEM('color',(#518501),#3306); +#518501 = PRESENTATION_STYLE_ASSIGNMENT((#518502,#518507)); +#518502 = SURFACE_STYLE_USAGE(.BOTH.,#518503); +#518503 = SURFACE_SIDE_STYLE('',(#518504)); +#518504 = SURFACE_STYLE_FILL_AREA(#518505); +#518505 = FILL_AREA_STYLE('',(#518506)); +#518506 = FILL_AREA_STYLE_COLOUR('',#517768); +#518507 = CURVE_STYLE('',#518508,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518508 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518509 = STYLED_ITEM('color',(#518510),#3323); +#518510 = PRESENTATION_STYLE_ASSIGNMENT((#518511,#518516)); +#518511 = SURFACE_STYLE_USAGE(.BOTH.,#518512); +#518512 = SURFACE_SIDE_STYLE('',(#518513)); +#518513 = SURFACE_STYLE_FILL_AREA(#518514); +#518514 = FILL_AREA_STYLE('',(#518515)); +#518515 = FILL_AREA_STYLE_COLOUR('',#517768); +#518516 = CURVE_STYLE('',#518517,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518517 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518518 = STYLED_ITEM('color',(#518519),#3370); +#518519 = PRESENTATION_STYLE_ASSIGNMENT((#518520,#518525)); +#518520 = SURFACE_STYLE_USAGE(.BOTH.,#518521); +#518521 = SURFACE_SIDE_STYLE('',(#518522)); +#518522 = SURFACE_STYLE_FILL_AREA(#518523); +#518523 = FILL_AREA_STYLE('',(#518524)); +#518524 = FILL_AREA_STYLE_COLOUR('',#517768); +#518525 = CURVE_STYLE('',#518526,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518526 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518527 = STYLED_ITEM('color',(#518528),#3387); +#518528 = PRESENTATION_STYLE_ASSIGNMENT((#518529,#518534)); +#518529 = SURFACE_STYLE_USAGE(.BOTH.,#518530); +#518530 = SURFACE_SIDE_STYLE('',(#518531)); +#518531 = SURFACE_STYLE_FILL_AREA(#518532); +#518532 = FILL_AREA_STYLE('',(#518533)); +#518533 = FILL_AREA_STYLE_COLOUR('',#517768); +#518534 = CURVE_STYLE('',#518535,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518536 = STYLED_ITEM('color',(#518537),#3434); +#518537 = PRESENTATION_STYLE_ASSIGNMENT((#518538,#518543)); +#518538 = SURFACE_STYLE_USAGE(.BOTH.,#518539); +#518539 = SURFACE_SIDE_STYLE('',(#518540)); +#518540 = SURFACE_STYLE_FILL_AREA(#518541); +#518541 = FILL_AREA_STYLE('',(#518542)); +#518542 = FILL_AREA_STYLE_COLOUR('',#517768); +#518543 = CURVE_STYLE('',#518544,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518544 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518545 = STYLED_ITEM('color',(#518546),#3451); +#518546 = PRESENTATION_STYLE_ASSIGNMENT((#518547,#518552)); +#518547 = SURFACE_STYLE_USAGE(.BOTH.,#518548); +#518548 = SURFACE_SIDE_STYLE('',(#518549)); +#518549 = SURFACE_STYLE_FILL_AREA(#518550); +#518550 = FILL_AREA_STYLE('',(#518551)); +#518551 = FILL_AREA_STYLE_COLOUR('',#517768); +#518552 = CURVE_STYLE('',#518553,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518553 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518554 = STYLED_ITEM('color',(#518555),#3498); +#518555 = PRESENTATION_STYLE_ASSIGNMENT((#518556,#518561)); +#518556 = SURFACE_STYLE_USAGE(.BOTH.,#518557); +#518557 = SURFACE_SIDE_STYLE('',(#518558)); +#518558 = SURFACE_STYLE_FILL_AREA(#518559); +#518559 = FILL_AREA_STYLE('',(#518560)); +#518560 = FILL_AREA_STYLE_COLOUR('',#517768); +#518561 = CURVE_STYLE('',#518562,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518562 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518563 = STYLED_ITEM('color',(#518564),#3515); +#518564 = PRESENTATION_STYLE_ASSIGNMENT((#518565,#518570)); +#518565 = SURFACE_STYLE_USAGE(.BOTH.,#518566); +#518566 = SURFACE_SIDE_STYLE('',(#518567)); +#518567 = SURFACE_STYLE_FILL_AREA(#518568); +#518568 = FILL_AREA_STYLE('',(#518569)); +#518569 = FILL_AREA_STYLE_COLOUR('',#517768); +#518570 = CURVE_STYLE('',#518571,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518571 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518572 = STYLED_ITEM('color',(#518573),#3562); +#518573 = PRESENTATION_STYLE_ASSIGNMENT((#518574,#518579)); +#518574 = SURFACE_STYLE_USAGE(.BOTH.,#518575); +#518575 = SURFACE_SIDE_STYLE('',(#518576)); +#518576 = SURFACE_STYLE_FILL_AREA(#518577); +#518577 = FILL_AREA_STYLE('',(#518578)); +#518578 = FILL_AREA_STYLE_COLOUR('',#517768); +#518579 = CURVE_STYLE('',#518580,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518580 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518581 = STYLED_ITEM('color',(#518582),#3579); +#518582 = PRESENTATION_STYLE_ASSIGNMENT((#518583,#518588)); +#518583 = SURFACE_STYLE_USAGE(.BOTH.,#518584); +#518584 = SURFACE_SIDE_STYLE('',(#518585)); +#518585 = SURFACE_STYLE_FILL_AREA(#518586); +#518586 = FILL_AREA_STYLE('',(#518587)); +#518587 = FILL_AREA_STYLE_COLOUR('',#517768); +#518588 = CURVE_STYLE('',#518589,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518589 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518590 = STYLED_ITEM('color',(#518591),#3626); +#518591 = PRESENTATION_STYLE_ASSIGNMENT((#518592,#518597)); +#518592 = SURFACE_STYLE_USAGE(.BOTH.,#518593); +#518593 = SURFACE_SIDE_STYLE('',(#518594)); +#518594 = SURFACE_STYLE_FILL_AREA(#518595); +#518595 = FILL_AREA_STYLE('',(#518596)); +#518596 = FILL_AREA_STYLE_COLOUR('',#517768); +#518597 = CURVE_STYLE('',#518598,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518598 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518599 = STYLED_ITEM('color',(#518600),#3643); +#518600 = PRESENTATION_STYLE_ASSIGNMENT((#518601,#518606)); +#518601 = SURFACE_STYLE_USAGE(.BOTH.,#518602); +#518602 = SURFACE_SIDE_STYLE('',(#518603)); +#518603 = SURFACE_STYLE_FILL_AREA(#518604); +#518604 = FILL_AREA_STYLE('',(#518605)); +#518605 = FILL_AREA_STYLE_COLOUR('',#517768); +#518606 = CURVE_STYLE('',#518607,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518607 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518608 = STYLED_ITEM('color',(#518609),#3690); +#518609 = PRESENTATION_STYLE_ASSIGNMENT((#518610,#518615)); +#518610 = SURFACE_STYLE_USAGE(.BOTH.,#518611); +#518611 = SURFACE_SIDE_STYLE('',(#518612)); +#518612 = SURFACE_STYLE_FILL_AREA(#518613); +#518613 = FILL_AREA_STYLE('',(#518614)); +#518614 = FILL_AREA_STYLE_COLOUR('',#517768); +#518615 = CURVE_STYLE('',#518616,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518616 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518617 = STYLED_ITEM('color',(#518618),#3707); +#518618 = PRESENTATION_STYLE_ASSIGNMENT((#518619,#518624)); +#518619 = SURFACE_STYLE_USAGE(.BOTH.,#518620); +#518620 = SURFACE_SIDE_STYLE('',(#518621)); +#518621 = SURFACE_STYLE_FILL_AREA(#518622); +#518622 = FILL_AREA_STYLE('',(#518623)); +#518623 = FILL_AREA_STYLE_COLOUR('',#517768); +#518624 = CURVE_STYLE('',#518625,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518625 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518626 = STYLED_ITEM('color',(#518627),#3754); +#518627 = PRESENTATION_STYLE_ASSIGNMENT((#518628,#518633)); +#518628 = SURFACE_STYLE_USAGE(.BOTH.,#518629); +#518629 = SURFACE_SIDE_STYLE('',(#518630)); +#518630 = SURFACE_STYLE_FILL_AREA(#518631); +#518631 = FILL_AREA_STYLE('',(#518632)); +#518632 = FILL_AREA_STYLE_COLOUR('',#517768); +#518633 = CURVE_STYLE('',#518634,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518634 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518635 = STYLED_ITEM('color',(#518636),#3771); +#518636 = PRESENTATION_STYLE_ASSIGNMENT((#518637,#518642)); +#518637 = SURFACE_STYLE_USAGE(.BOTH.,#518638); +#518638 = SURFACE_SIDE_STYLE('',(#518639)); +#518639 = SURFACE_STYLE_FILL_AREA(#518640); +#518640 = FILL_AREA_STYLE('',(#518641)); +#518641 = FILL_AREA_STYLE_COLOUR('',#517768); +#518642 = CURVE_STYLE('',#518643,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518643 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518644 = STYLED_ITEM('color',(#518645),#3818); +#518645 = PRESENTATION_STYLE_ASSIGNMENT((#518646,#518651)); +#518646 = SURFACE_STYLE_USAGE(.BOTH.,#518647); +#518647 = SURFACE_SIDE_STYLE('',(#518648)); +#518648 = SURFACE_STYLE_FILL_AREA(#518649); +#518649 = FILL_AREA_STYLE('',(#518650)); +#518650 = FILL_AREA_STYLE_COLOUR('',#517768); +#518651 = CURVE_STYLE('',#518652,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518652 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518653 = STYLED_ITEM('color',(#518654),#3835); +#518654 = PRESENTATION_STYLE_ASSIGNMENT((#518655,#518660)); +#518655 = SURFACE_STYLE_USAGE(.BOTH.,#518656); +#518656 = SURFACE_SIDE_STYLE('',(#518657)); +#518657 = SURFACE_STYLE_FILL_AREA(#518658); +#518658 = FILL_AREA_STYLE('',(#518659)); +#518659 = FILL_AREA_STYLE_COLOUR('',#517768); +#518660 = CURVE_STYLE('',#518661,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518661 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518662 = STYLED_ITEM('color',(#518663),#3882); +#518663 = PRESENTATION_STYLE_ASSIGNMENT((#518664,#518669)); +#518664 = SURFACE_STYLE_USAGE(.BOTH.,#518665); +#518665 = SURFACE_SIDE_STYLE('',(#518666)); +#518666 = SURFACE_STYLE_FILL_AREA(#518667); +#518667 = FILL_AREA_STYLE('',(#518668)); +#518668 = FILL_AREA_STYLE_COLOUR('',#517768); +#518669 = CURVE_STYLE('',#518670,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518671 = STYLED_ITEM('color',(#518672),#3899); +#518672 = PRESENTATION_STYLE_ASSIGNMENT((#518673,#518678)); +#518673 = SURFACE_STYLE_USAGE(.BOTH.,#518674); +#518674 = SURFACE_SIDE_STYLE('',(#518675)); +#518675 = SURFACE_STYLE_FILL_AREA(#518676); +#518676 = FILL_AREA_STYLE('',(#518677)); +#518677 = FILL_AREA_STYLE_COLOUR('',#517768); +#518678 = CURVE_STYLE('',#518679,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518679 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518680 = STYLED_ITEM('color',(#518681),#3946); +#518681 = PRESENTATION_STYLE_ASSIGNMENT((#518682,#518687)); +#518682 = SURFACE_STYLE_USAGE(.BOTH.,#518683); +#518683 = SURFACE_SIDE_STYLE('',(#518684)); +#518684 = SURFACE_STYLE_FILL_AREA(#518685); +#518685 = FILL_AREA_STYLE('',(#518686)); +#518686 = FILL_AREA_STYLE_COLOUR('',#512501); +#518687 = CURVE_STYLE('',#518688,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518688 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518689 = STYLED_ITEM('color',(#518690),#3977); +#518690 = PRESENTATION_STYLE_ASSIGNMENT((#518691,#518696)); +#518691 = SURFACE_STYLE_USAGE(.BOTH.,#518692); +#518692 = SURFACE_SIDE_STYLE('',(#518693)); +#518693 = SURFACE_STYLE_FILL_AREA(#518694); +#518694 = FILL_AREA_STYLE('',(#518695)); +#518695 = FILL_AREA_STYLE_COLOUR('',#512501); +#518696 = CURVE_STYLE('',#518697,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518697 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518698 = OVER_RIDING_STYLED_ITEM('overriding color',(#518699),#3991, + #518689); +#518699 = PRESENTATION_STYLE_ASSIGNMENT((#518700,#518705)); +#518700 = SURFACE_STYLE_USAGE(.BOTH.,#518701); +#518701 = SURFACE_SIDE_STYLE('',(#518702)); +#518702 = SURFACE_STYLE_FILL_AREA(#518703); +#518703 = FILL_AREA_STYLE('',(#518704)); +#518704 = FILL_AREA_STYLE_COLOUR('',#517768); +#518705 = CURVE_STYLE('',#518706,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518706 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518707 = OVER_RIDING_STYLED_ITEM('overriding color',(#518708),#4007, + #518689); +#518708 = PRESENTATION_STYLE_ASSIGNMENT((#518709,#518714)); +#518709 = SURFACE_STYLE_USAGE(.BOTH.,#518710); +#518710 = SURFACE_SIDE_STYLE('',(#518711)); +#518711 = SURFACE_STYLE_FILL_AREA(#518712); +#518712 = FILL_AREA_STYLE('',(#518713)); +#518713 = FILL_AREA_STYLE_COLOUR('',#517768); +#518714 = CURVE_STYLE('',#518715,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518715 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518716 = STYLED_ITEM('color',(#518717),#4033); +#518717 = PRESENTATION_STYLE_ASSIGNMENT((#518718,#518723)); +#518718 = SURFACE_STYLE_USAGE(.BOTH.,#518719); +#518719 = SURFACE_SIDE_STYLE('',(#518720)); +#518720 = SURFACE_STYLE_FILL_AREA(#518721); +#518721 = FILL_AREA_STYLE('',(#518722)); +#518722 = FILL_AREA_STYLE_COLOUR('',#512501); +#518723 = CURVE_STYLE('',#518724,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518724 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518725 = STYLED_ITEM('color',(#518726),#4057); +#518726 = PRESENTATION_STYLE_ASSIGNMENT((#518727,#518732)); +#518727 = SURFACE_STYLE_USAGE(.BOTH.,#518728); +#518728 = SURFACE_SIDE_STYLE('',(#518729)); +#518729 = SURFACE_STYLE_FILL_AREA(#518730); +#518730 = FILL_AREA_STYLE('',(#518731)); +#518731 = FILL_AREA_STYLE_COLOUR('',#512501); +#518732 = CURVE_STYLE('',#518733,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518733 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518734 = OVER_RIDING_STYLED_ITEM('overriding color',(#518735),#4071, + #518725); +#518735 = PRESENTATION_STYLE_ASSIGNMENT((#518736,#518741)); +#518736 = SURFACE_STYLE_USAGE(.BOTH.,#518737); +#518737 = SURFACE_SIDE_STYLE('',(#518738)); +#518738 = SURFACE_STYLE_FILL_AREA(#518739); +#518739 = FILL_AREA_STYLE('',(#518740)); +#518740 = FILL_AREA_STYLE_COLOUR('',#517768); +#518741 = CURVE_STYLE('',#518742,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518742 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518743 = OVER_RIDING_STYLED_ITEM('overriding color',(#518744),#4087, + #518725); +#518744 = PRESENTATION_STYLE_ASSIGNMENT((#518745,#518750)); +#518745 = SURFACE_STYLE_USAGE(.BOTH.,#518746); +#518746 = SURFACE_SIDE_STYLE('',(#518747)); +#518747 = SURFACE_STYLE_FILL_AREA(#518748); +#518748 = FILL_AREA_STYLE('',(#518749)); +#518749 = FILL_AREA_STYLE_COLOUR('',#517768); +#518750 = CURVE_STYLE('',#518751,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518751 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518752 = STYLED_ITEM('color',(#518753),#4106); +#518753 = PRESENTATION_STYLE_ASSIGNMENT((#518754,#518759)); +#518754 = SURFACE_STYLE_USAGE(.BOTH.,#518755); +#518755 = SURFACE_SIDE_STYLE('',(#518756)); +#518756 = SURFACE_STYLE_FILL_AREA(#518757); +#518757 = FILL_AREA_STYLE('',(#518758)); +#518758 = FILL_AREA_STYLE_COLOUR('',#512501); +#518759 = CURVE_STYLE('',#518760,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518760 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518761 = STYLED_ITEM('color',(#518762),#4137); +#518762 = PRESENTATION_STYLE_ASSIGNMENT((#518763,#518768)); +#518763 = SURFACE_STYLE_USAGE(.BOTH.,#518764); +#518764 = SURFACE_SIDE_STYLE('',(#518765)); +#518765 = SURFACE_STYLE_FILL_AREA(#518766); +#518766 = FILL_AREA_STYLE('',(#518767)); +#518767 = FILL_AREA_STYLE_COLOUR('',#512501); +#518768 = CURVE_STYLE('',#518769,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518769 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518770 = OVER_RIDING_STYLED_ITEM('overriding color',(#518771),#4151, + #518761); +#518771 = PRESENTATION_STYLE_ASSIGNMENT((#518772,#518777)); +#518772 = SURFACE_STYLE_USAGE(.BOTH.,#518773); +#518773 = SURFACE_SIDE_STYLE('',(#518774)); +#518774 = SURFACE_STYLE_FILL_AREA(#518775); +#518775 = FILL_AREA_STYLE('',(#518776)); +#518776 = FILL_AREA_STYLE_COLOUR('',#517768); +#518777 = CURVE_STYLE('',#518778,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518779 = OVER_RIDING_STYLED_ITEM('overriding color',(#518780),#4167, + #518761); +#518780 = PRESENTATION_STYLE_ASSIGNMENT((#518781,#518786)); +#518781 = SURFACE_STYLE_USAGE(.BOTH.,#518782); +#518782 = SURFACE_SIDE_STYLE('',(#518783)); +#518783 = SURFACE_STYLE_FILL_AREA(#518784); +#518784 = FILL_AREA_STYLE('',(#518785)); +#518785 = FILL_AREA_STYLE_COLOUR('',#517768); +#518786 = CURVE_STYLE('',#518787,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518787 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518788 = STYLED_ITEM('color',(#518789),#4193); +#518789 = PRESENTATION_STYLE_ASSIGNMENT((#518790,#518795)); +#518790 = SURFACE_STYLE_USAGE(.BOTH.,#518791); +#518791 = SURFACE_SIDE_STYLE('',(#518792)); +#518792 = SURFACE_STYLE_FILL_AREA(#518793); +#518793 = FILL_AREA_STYLE('',(#518794)); +#518794 = FILL_AREA_STYLE_COLOUR('',#512501); +#518795 = CURVE_STYLE('',#518796,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518796 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518797 = STYLED_ITEM('color',(#518798),#4217); +#518798 = PRESENTATION_STYLE_ASSIGNMENT((#518799,#518804)); +#518799 = SURFACE_STYLE_USAGE(.BOTH.,#518800); +#518800 = SURFACE_SIDE_STYLE('',(#518801)); +#518801 = SURFACE_STYLE_FILL_AREA(#518802); +#518802 = FILL_AREA_STYLE('',(#518803)); +#518803 = FILL_AREA_STYLE_COLOUR('',#512501); +#518804 = CURVE_STYLE('',#518805,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518806 = OVER_RIDING_STYLED_ITEM('overriding color',(#518807),#4231, + #518797); +#518807 = PRESENTATION_STYLE_ASSIGNMENT((#518808,#518813)); +#518808 = SURFACE_STYLE_USAGE(.BOTH.,#518809); +#518809 = SURFACE_SIDE_STYLE('',(#518810)); +#518810 = SURFACE_STYLE_FILL_AREA(#518811); +#518811 = FILL_AREA_STYLE('',(#518812)); +#518812 = FILL_AREA_STYLE_COLOUR('',#517768); +#518813 = CURVE_STYLE('',#518814,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518814 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518815 = OVER_RIDING_STYLED_ITEM('overriding color',(#518816),#4247, + #518797); +#518816 = PRESENTATION_STYLE_ASSIGNMENT((#518817,#518822)); +#518817 = SURFACE_STYLE_USAGE(.BOTH.,#518818); +#518818 = SURFACE_SIDE_STYLE('',(#518819)); +#518819 = SURFACE_STYLE_FILL_AREA(#518820); +#518820 = FILL_AREA_STYLE('',(#518821)); +#518821 = FILL_AREA_STYLE_COLOUR('',#517768); +#518822 = CURVE_STYLE('',#518823,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518823 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518824 = STYLED_ITEM('color',(#518825),#4266); +#518825 = PRESENTATION_STYLE_ASSIGNMENT((#518826,#518831)); +#518826 = SURFACE_STYLE_USAGE(.BOTH.,#518827); +#518827 = SURFACE_SIDE_STYLE('',(#518828)); +#518828 = SURFACE_STYLE_FILL_AREA(#518829); +#518829 = FILL_AREA_STYLE('',(#518830)); +#518830 = FILL_AREA_STYLE_COLOUR('',#512501); +#518831 = CURVE_STYLE('',#518832,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518832 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518833 = STYLED_ITEM('color',(#518834),#4297); +#518834 = PRESENTATION_STYLE_ASSIGNMENT((#518835,#518840)); +#518835 = SURFACE_STYLE_USAGE(.BOTH.,#518836); +#518836 = SURFACE_SIDE_STYLE('',(#518837)); +#518837 = SURFACE_STYLE_FILL_AREA(#518838); +#518838 = FILL_AREA_STYLE('',(#518839)); +#518839 = FILL_AREA_STYLE_COLOUR('',#512501); +#518840 = CURVE_STYLE('',#518841,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518841 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518842 = OVER_RIDING_STYLED_ITEM('overriding color',(#518843),#4311, + #518833); +#518843 = PRESENTATION_STYLE_ASSIGNMENT((#518844,#518849)); +#518844 = SURFACE_STYLE_USAGE(.BOTH.,#518845); +#518845 = SURFACE_SIDE_STYLE('',(#518846)); +#518846 = SURFACE_STYLE_FILL_AREA(#518847); +#518847 = FILL_AREA_STYLE('',(#518848)); +#518848 = FILL_AREA_STYLE_COLOUR('',#517768); +#518849 = CURVE_STYLE('',#518850,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518850 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518851 = OVER_RIDING_STYLED_ITEM('overriding color',(#518852),#4327, + #518833); +#518852 = PRESENTATION_STYLE_ASSIGNMENT((#518853,#518858)); +#518853 = SURFACE_STYLE_USAGE(.BOTH.,#518854); +#518854 = SURFACE_SIDE_STYLE('',(#518855)); +#518855 = SURFACE_STYLE_FILL_AREA(#518856); +#518856 = FILL_AREA_STYLE('',(#518857)); +#518857 = FILL_AREA_STYLE_COLOUR('',#517768); +#518858 = CURVE_STYLE('',#518859,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518859 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518860 = STYLED_ITEM('color',(#518861),#4353); +#518861 = PRESENTATION_STYLE_ASSIGNMENT((#518862,#518867)); +#518862 = SURFACE_STYLE_USAGE(.BOTH.,#518863); +#518863 = SURFACE_SIDE_STYLE('',(#518864)); +#518864 = SURFACE_STYLE_FILL_AREA(#518865); +#518865 = FILL_AREA_STYLE('',(#518866)); +#518866 = FILL_AREA_STYLE_COLOUR('',#512501); +#518867 = CURVE_STYLE('',#518868,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518868 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518869 = STYLED_ITEM('color',(#518870),#4377); +#518870 = PRESENTATION_STYLE_ASSIGNMENT((#518871,#518876)); +#518871 = SURFACE_STYLE_USAGE(.BOTH.,#518872); +#518872 = SURFACE_SIDE_STYLE('',(#518873)); +#518873 = SURFACE_STYLE_FILL_AREA(#518874); +#518874 = FILL_AREA_STYLE('',(#518875)); +#518875 = FILL_AREA_STYLE_COLOUR('',#512501); +#518876 = CURVE_STYLE('',#518877,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518878 = OVER_RIDING_STYLED_ITEM('overriding color',(#518879),#4391, + #518869); +#518879 = PRESENTATION_STYLE_ASSIGNMENT((#518880,#518885)); +#518880 = SURFACE_STYLE_USAGE(.BOTH.,#518881); +#518881 = SURFACE_SIDE_STYLE('',(#518882)); +#518882 = SURFACE_STYLE_FILL_AREA(#518883); +#518883 = FILL_AREA_STYLE('',(#518884)); +#518884 = FILL_AREA_STYLE_COLOUR('',#517768); +#518885 = CURVE_STYLE('',#518886,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518886 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518887 = OVER_RIDING_STYLED_ITEM('overriding color',(#518888),#4407, + #518869); +#518888 = PRESENTATION_STYLE_ASSIGNMENT((#518889,#518894)); +#518889 = SURFACE_STYLE_USAGE(.BOTH.,#518890); +#518890 = SURFACE_SIDE_STYLE('',(#518891)); +#518891 = SURFACE_STYLE_FILL_AREA(#518892); +#518892 = FILL_AREA_STYLE('',(#518893)); +#518893 = FILL_AREA_STYLE_COLOUR('',#517768); +#518894 = CURVE_STYLE('',#518895,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518895 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518896 = STYLED_ITEM('color',(#518897),#4426); +#518897 = PRESENTATION_STYLE_ASSIGNMENT((#518898,#518903)); +#518898 = SURFACE_STYLE_USAGE(.BOTH.,#518899); +#518899 = SURFACE_SIDE_STYLE('',(#518900)); +#518900 = SURFACE_STYLE_FILL_AREA(#518901); +#518901 = FILL_AREA_STYLE('',(#518902)); +#518902 = FILL_AREA_STYLE_COLOUR('',#512501); +#518903 = CURVE_STYLE('',#518904,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518905 = STYLED_ITEM('color',(#518906),#4457); +#518906 = PRESENTATION_STYLE_ASSIGNMENT((#518907,#518912)); +#518907 = SURFACE_STYLE_USAGE(.BOTH.,#518908); +#518908 = SURFACE_SIDE_STYLE('',(#518909)); +#518909 = SURFACE_STYLE_FILL_AREA(#518910); +#518910 = FILL_AREA_STYLE('',(#518911)); +#518911 = FILL_AREA_STYLE_COLOUR('',#512501); +#518912 = CURVE_STYLE('',#518913,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518914 = OVER_RIDING_STYLED_ITEM('overriding color',(#518915),#4471, + #518905); +#518915 = PRESENTATION_STYLE_ASSIGNMENT((#518916,#518921)); +#518916 = SURFACE_STYLE_USAGE(.BOTH.,#518917); +#518917 = SURFACE_SIDE_STYLE('',(#518918)); +#518918 = SURFACE_STYLE_FILL_AREA(#518919); +#518919 = FILL_AREA_STYLE('',(#518920)); +#518920 = FILL_AREA_STYLE_COLOUR('',#517768); +#518921 = CURVE_STYLE('',#518922,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518923 = OVER_RIDING_STYLED_ITEM('overriding color',(#518924),#4487, + #518905); +#518924 = PRESENTATION_STYLE_ASSIGNMENT((#518925,#518930)); +#518925 = SURFACE_STYLE_USAGE(.BOTH.,#518926); +#518926 = SURFACE_SIDE_STYLE('',(#518927)); +#518927 = SURFACE_STYLE_FILL_AREA(#518928); +#518928 = FILL_AREA_STYLE('',(#518929)); +#518929 = FILL_AREA_STYLE_COLOUR('',#517768); +#518930 = CURVE_STYLE('',#518931,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518932 = STYLED_ITEM('color',(#518933),#4513); +#518933 = PRESENTATION_STYLE_ASSIGNMENT((#518934,#518939)); +#518934 = SURFACE_STYLE_USAGE(.BOTH.,#518935); +#518935 = SURFACE_SIDE_STYLE('',(#518936)); +#518936 = SURFACE_STYLE_FILL_AREA(#518937); +#518937 = FILL_AREA_STYLE('',(#518938)); +#518938 = FILL_AREA_STYLE_COLOUR('',#512501); +#518939 = CURVE_STYLE('',#518940,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518941 = STYLED_ITEM('color',(#518942),#4537); +#518942 = PRESENTATION_STYLE_ASSIGNMENT((#518943,#518948)); +#518943 = SURFACE_STYLE_USAGE(.BOTH.,#518944); +#518944 = SURFACE_SIDE_STYLE('',(#518945)); +#518945 = SURFACE_STYLE_FILL_AREA(#518946); +#518946 = FILL_AREA_STYLE('',(#518947)); +#518947 = FILL_AREA_STYLE_COLOUR('',#512501); +#518948 = CURVE_STYLE('',#518949,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518950 = OVER_RIDING_STYLED_ITEM('overriding color',(#518951),#4551, + #518941); +#518951 = PRESENTATION_STYLE_ASSIGNMENT((#518952,#518957)); +#518952 = SURFACE_STYLE_USAGE(.BOTH.,#518953); +#518953 = SURFACE_SIDE_STYLE('',(#518954)); +#518954 = SURFACE_STYLE_FILL_AREA(#518955); +#518955 = FILL_AREA_STYLE('',(#518956)); +#518956 = FILL_AREA_STYLE_COLOUR('',#517768); +#518957 = CURVE_STYLE('',#518958,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518959 = OVER_RIDING_STYLED_ITEM('overriding color',(#518960),#4567, + #518941); +#518960 = PRESENTATION_STYLE_ASSIGNMENT((#518961,#518966)); +#518961 = SURFACE_STYLE_USAGE(.BOTH.,#518962); +#518962 = SURFACE_SIDE_STYLE('',(#518963)); +#518963 = SURFACE_STYLE_FILL_AREA(#518964); +#518964 = FILL_AREA_STYLE('',(#518965)); +#518965 = FILL_AREA_STYLE_COLOUR('',#517768); +#518966 = CURVE_STYLE('',#518967,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518968 = STYLED_ITEM('color',(#518969),#4586); +#518969 = PRESENTATION_STYLE_ASSIGNMENT((#518970,#518975)); +#518970 = SURFACE_STYLE_USAGE(.BOTH.,#518971); +#518971 = SURFACE_SIDE_STYLE('',(#518972)); +#518972 = SURFACE_STYLE_FILL_AREA(#518973); +#518973 = FILL_AREA_STYLE('',(#518974)); +#518974 = FILL_AREA_STYLE_COLOUR('',#512501); +#518975 = CURVE_STYLE('',#518976,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518977 = STYLED_ITEM('color',(#518978),#4617); +#518978 = PRESENTATION_STYLE_ASSIGNMENT((#518979,#518984)); +#518979 = SURFACE_STYLE_USAGE(.BOTH.,#518980); +#518980 = SURFACE_SIDE_STYLE('',(#518981)); +#518981 = SURFACE_STYLE_FILL_AREA(#518982); +#518982 = FILL_AREA_STYLE('',(#518983)); +#518983 = FILL_AREA_STYLE_COLOUR('',#512501); +#518984 = CURVE_STYLE('',#518985,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#518985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518986 = OVER_RIDING_STYLED_ITEM('overriding color',(#518987),#4631, + #518977); +#518987 = PRESENTATION_STYLE_ASSIGNMENT((#518988,#518993)); +#518988 = SURFACE_STYLE_USAGE(.BOTH.,#518989); +#518989 = SURFACE_SIDE_STYLE('',(#518990)); +#518990 = SURFACE_STYLE_FILL_AREA(#518991); +#518991 = FILL_AREA_STYLE('',(#518992)); +#518992 = FILL_AREA_STYLE_COLOUR('',#517768); +#518993 = CURVE_STYLE('',#518994,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#518994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#518995 = OVER_RIDING_STYLED_ITEM('overriding color',(#518996),#4647, + #518977); +#518996 = PRESENTATION_STYLE_ASSIGNMENT((#518997,#519002)); +#518997 = SURFACE_STYLE_USAGE(.BOTH.,#518998); +#518998 = SURFACE_SIDE_STYLE('',(#518999)); +#518999 = SURFACE_STYLE_FILL_AREA(#519000); +#519000 = FILL_AREA_STYLE('',(#519001)); +#519001 = FILL_AREA_STYLE_COLOUR('',#517768); +#519002 = CURVE_STYLE('',#519003,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519004 = STYLED_ITEM('color',(#519005),#4673); +#519005 = PRESENTATION_STYLE_ASSIGNMENT((#519006,#519011)); +#519006 = SURFACE_STYLE_USAGE(.BOTH.,#519007); +#519007 = SURFACE_SIDE_STYLE('',(#519008)); +#519008 = SURFACE_STYLE_FILL_AREA(#519009); +#519009 = FILL_AREA_STYLE('',(#519010)); +#519010 = FILL_AREA_STYLE_COLOUR('',#512501); +#519011 = CURVE_STYLE('',#519012,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519013 = STYLED_ITEM('color',(#519014),#4697); +#519014 = PRESENTATION_STYLE_ASSIGNMENT((#519015,#519020)); +#519015 = SURFACE_STYLE_USAGE(.BOTH.,#519016); +#519016 = SURFACE_SIDE_STYLE('',(#519017)); +#519017 = SURFACE_STYLE_FILL_AREA(#519018); +#519018 = FILL_AREA_STYLE('',(#519019)); +#519019 = FILL_AREA_STYLE_COLOUR('',#512501); +#519020 = CURVE_STYLE('',#519021,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519022 = OVER_RIDING_STYLED_ITEM('overriding color',(#519023),#4711, + #519013); +#519023 = PRESENTATION_STYLE_ASSIGNMENT((#519024,#519029)); +#519024 = SURFACE_STYLE_USAGE(.BOTH.,#519025); +#519025 = SURFACE_SIDE_STYLE('',(#519026)); +#519026 = SURFACE_STYLE_FILL_AREA(#519027); +#519027 = FILL_AREA_STYLE('',(#519028)); +#519028 = FILL_AREA_STYLE_COLOUR('',#517768); +#519029 = CURVE_STYLE('',#519030,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519031 = OVER_RIDING_STYLED_ITEM('overriding color',(#519032),#4727, + #519013); +#519032 = PRESENTATION_STYLE_ASSIGNMENT((#519033,#519038)); +#519033 = SURFACE_STYLE_USAGE(.BOTH.,#519034); +#519034 = SURFACE_SIDE_STYLE('',(#519035)); +#519035 = SURFACE_STYLE_FILL_AREA(#519036); +#519036 = FILL_AREA_STYLE('',(#519037)); +#519037 = FILL_AREA_STYLE_COLOUR('',#517768); +#519038 = CURVE_STYLE('',#519039,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519040 = STYLED_ITEM('color',(#519041),#4746); +#519041 = PRESENTATION_STYLE_ASSIGNMENT((#519042,#519047)); +#519042 = SURFACE_STYLE_USAGE(.BOTH.,#519043); +#519043 = SURFACE_SIDE_STYLE('',(#519044)); +#519044 = SURFACE_STYLE_FILL_AREA(#519045); +#519045 = FILL_AREA_STYLE('',(#519046)); +#519046 = FILL_AREA_STYLE_COLOUR('',#512501); +#519047 = CURVE_STYLE('',#519048,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519049 = STYLED_ITEM('color',(#519050),#4777); +#519050 = PRESENTATION_STYLE_ASSIGNMENT((#519051,#519056)); +#519051 = SURFACE_STYLE_USAGE(.BOTH.,#519052); +#519052 = SURFACE_SIDE_STYLE('',(#519053)); +#519053 = SURFACE_STYLE_FILL_AREA(#519054); +#519054 = FILL_AREA_STYLE('',(#519055)); +#519055 = FILL_AREA_STYLE_COLOUR('',#512501); +#519056 = CURVE_STYLE('',#519057,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519058 = OVER_RIDING_STYLED_ITEM('overriding color',(#519059),#4791, + #519049); +#519059 = PRESENTATION_STYLE_ASSIGNMENT((#519060,#519065)); +#519060 = SURFACE_STYLE_USAGE(.BOTH.,#519061); +#519061 = SURFACE_SIDE_STYLE('',(#519062)); +#519062 = SURFACE_STYLE_FILL_AREA(#519063); +#519063 = FILL_AREA_STYLE('',(#519064)); +#519064 = FILL_AREA_STYLE_COLOUR('',#517768); +#519065 = CURVE_STYLE('',#519066,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519067 = OVER_RIDING_STYLED_ITEM('overriding color',(#519068),#4807, + #519049); +#519068 = PRESENTATION_STYLE_ASSIGNMENT((#519069,#519074)); +#519069 = SURFACE_STYLE_USAGE(.BOTH.,#519070); +#519070 = SURFACE_SIDE_STYLE('',(#519071)); +#519071 = SURFACE_STYLE_FILL_AREA(#519072); +#519072 = FILL_AREA_STYLE('',(#519073)); +#519073 = FILL_AREA_STYLE_COLOUR('',#517768); +#519074 = CURVE_STYLE('',#519075,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519076 = STYLED_ITEM('color',(#519077),#4833); +#519077 = PRESENTATION_STYLE_ASSIGNMENT((#519078,#519083)); +#519078 = SURFACE_STYLE_USAGE(.BOTH.,#519079); +#519079 = SURFACE_SIDE_STYLE('',(#519080)); +#519080 = SURFACE_STYLE_FILL_AREA(#519081); +#519081 = FILL_AREA_STYLE('',(#519082)); +#519082 = FILL_AREA_STYLE_COLOUR('',#512501); +#519083 = CURVE_STYLE('',#519084,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519085 = STYLED_ITEM('color',(#519086),#4857); +#519086 = PRESENTATION_STYLE_ASSIGNMENT((#519087,#519092)); +#519087 = SURFACE_STYLE_USAGE(.BOTH.,#519088); +#519088 = SURFACE_SIDE_STYLE('',(#519089)); +#519089 = SURFACE_STYLE_FILL_AREA(#519090); +#519090 = FILL_AREA_STYLE('',(#519091)); +#519091 = FILL_AREA_STYLE_COLOUR('',#512501); +#519092 = CURVE_STYLE('',#519093,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519094 = OVER_RIDING_STYLED_ITEM('overriding color',(#519095),#4871, + #519085); +#519095 = PRESENTATION_STYLE_ASSIGNMENT((#519096,#519101)); +#519096 = SURFACE_STYLE_USAGE(.BOTH.,#519097); +#519097 = SURFACE_SIDE_STYLE('',(#519098)); +#519098 = SURFACE_STYLE_FILL_AREA(#519099); +#519099 = FILL_AREA_STYLE('',(#519100)); +#519100 = FILL_AREA_STYLE_COLOUR('',#517768); +#519101 = CURVE_STYLE('',#519102,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519103 = OVER_RIDING_STYLED_ITEM('overriding color',(#519104),#4887, + #519085); +#519104 = PRESENTATION_STYLE_ASSIGNMENT((#519105,#519110)); +#519105 = SURFACE_STYLE_USAGE(.BOTH.,#519106); +#519106 = SURFACE_SIDE_STYLE('',(#519107)); +#519107 = SURFACE_STYLE_FILL_AREA(#519108); +#519108 = FILL_AREA_STYLE('',(#519109)); +#519109 = FILL_AREA_STYLE_COLOUR('',#517768); +#519110 = CURVE_STYLE('',#519111,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519112 = STYLED_ITEM('color',(#519113),#4906); +#519113 = PRESENTATION_STYLE_ASSIGNMENT((#519114,#519119)); +#519114 = SURFACE_STYLE_USAGE(.BOTH.,#519115); +#519115 = SURFACE_SIDE_STYLE('',(#519116)); +#519116 = SURFACE_STYLE_FILL_AREA(#519117); +#519117 = FILL_AREA_STYLE('',(#519118)); +#519118 = FILL_AREA_STYLE_COLOUR('',#512501); +#519119 = CURVE_STYLE('',#519120,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519121 = STYLED_ITEM('color',(#519122),#4937); +#519122 = PRESENTATION_STYLE_ASSIGNMENT((#519123,#519128)); +#519123 = SURFACE_STYLE_USAGE(.BOTH.,#519124); +#519124 = SURFACE_SIDE_STYLE('',(#519125)); +#519125 = SURFACE_STYLE_FILL_AREA(#519126); +#519126 = FILL_AREA_STYLE('',(#519127)); +#519127 = FILL_AREA_STYLE_COLOUR('',#512501); +#519128 = CURVE_STYLE('',#519129,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519130 = OVER_RIDING_STYLED_ITEM('overriding color',(#519131),#4951, + #519121); +#519131 = PRESENTATION_STYLE_ASSIGNMENT((#519132,#519137)); +#519132 = SURFACE_STYLE_USAGE(.BOTH.,#519133); +#519133 = SURFACE_SIDE_STYLE('',(#519134)); +#519134 = SURFACE_STYLE_FILL_AREA(#519135); +#519135 = FILL_AREA_STYLE('',(#519136)); +#519136 = FILL_AREA_STYLE_COLOUR('',#517768); +#519137 = CURVE_STYLE('',#519138,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519139 = OVER_RIDING_STYLED_ITEM('overriding color',(#519140),#4967, + #519121); +#519140 = PRESENTATION_STYLE_ASSIGNMENT((#519141,#519146)); +#519141 = SURFACE_STYLE_USAGE(.BOTH.,#519142); +#519142 = SURFACE_SIDE_STYLE('',(#519143)); +#519143 = SURFACE_STYLE_FILL_AREA(#519144); +#519144 = FILL_AREA_STYLE('',(#519145)); +#519145 = FILL_AREA_STYLE_COLOUR('',#517768); +#519146 = CURVE_STYLE('',#519147,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519148 = STYLED_ITEM('color',(#519149),#4993); +#519149 = PRESENTATION_STYLE_ASSIGNMENT((#519150,#519155)); +#519150 = SURFACE_STYLE_USAGE(.BOTH.,#519151); +#519151 = SURFACE_SIDE_STYLE('',(#519152)); +#519152 = SURFACE_STYLE_FILL_AREA(#519153); +#519153 = FILL_AREA_STYLE('',(#519154)); +#519154 = FILL_AREA_STYLE_COLOUR('',#512501); +#519155 = CURVE_STYLE('',#519156,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519157 = STYLED_ITEM('color',(#519158),#5017); +#519158 = PRESENTATION_STYLE_ASSIGNMENT((#519159,#519164)); +#519159 = SURFACE_STYLE_USAGE(.BOTH.,#519160); +#519160 = SURFACE_SIDE_STYLE('',(#519161)); +#519161 = SURFACE_STYLE_FILL_AREA(#519162); +#519162 = FILL_AREA_STYLE('',(#519163)); +#519163 = FILL_AREA_STYLE_COLOUR('',#512501); +#519164 = CURVE_STYLE('',#519165,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519166 = OVER_RIDING_STYLED_ITEM('overriding color',(#519167),#5031, + #519157); +#519167 = PRESENTATION_STYLE_ASSIGNMENT((#519168,#519173)); +#519168 = SURFACE_STYLE_USAGE(.BOTH.,#519169); +#519169 = SURFACE_SIDE_STYLE('',(#519170)); +#519170 = SURFACE_STYLE_FILL_AREA(#519171); +#519171 = FILL_AREA_STYLE('',(#519172)); +#519172 = FILL_AREA_STYLE_COLOUR('',#517768); +#519173 = CURVE_STYLE('',#519174,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519175 = OVER_RIDING_STYLED_ITEM('overriding color',(#519176),#5047, + #519157); +#519176 = PRESENTATION_STYLE_ASSIGNMENT((#519177,#519182)); +#519177 = SURFACE_STYLE_USAGE(.BOTH.,#519178); +#519178 = SURFACE_SIDE_STYLE('',(#519179)); +#519179 = SURFACE_STYLE_FILL_AREA(#519180); +#519180 = FILL_AREA_STYLE('',(#519181)); +#519181 = FILL_AREA_STYLE_COLOUR('',#517768); +#519182 = CURVE_STYLE('',#519183,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519184 = STYLED_ITEM('color',(#519185),#5066); +#519185 = PRESENTATION_STYLE_ASSIGNMENT((#519186,#519191)); +#519186 = SURFACE_STYLE_USAGE(.BOTH.,#519187); +#519187 = SURFACE_SIDE_STYLE('',(#519188)); +#519188 = SURFACE_STYLE_FILL_AREA(#519189); +#519189 = FILL_AREA_STYLE('',(#519190)); +#519190 = FILL_AREA_STYLE_COLOUR('',#512501); +#519191 = CURVE_STYLE('',#519192,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519193 = STYLED_ITEM('color',(#519194),#5097); +#519194 = PRESENTATION_STYLE_ASSIGNMENT((#519195,#519200)); +#519195 = SURFACE_STYLE_USAGE(.BOTH.,#519196); +#519196 = SURFACE_SIDE_STYLE('',(#519197)); +#519197 = SURFACE_STYLE_FILL_AREA(#519198); +#519198 = FILL_AREA_STYLE('',(#519199)); +#519199 = FILL_AREA_STYLE_COLOUR('',#512501); +#519200 = CURVE_STYLE('',#519201,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519202 = OVER_RIDING_STYLED_ITEM('overriding color',(#519203),#5111, + #519193); +#519203 = PRESENTATION_STYLE_ASSIGNMENT((#519204,#519209)); +#519204 = SURFACE_STYLE_USAGE(.BOTH.,#519205); +#519205 = SURFACE_SIDE_STYLE('',(#519206)); +#519206 = SURFACE_STYLE_FILL_AREA(#519207); +#519207 = FILL_AREA_STYLE('',(#519208)); +#519208 = FILL_AREA_STYLE_COLOUR('',#517768); +#519209 = CURVE_STYLE('',#519210,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519211 = OVER_RIDING_STYLED_ITEM('overriding color',(#519212),#5127, + #519193); +#519212 = PRESENTATION_STYLE_ASSIGNMENT((#519213,#519218)); +#519213 = SURFACE_STYLE_USAGE(.BOTH.,#519214); +#519214 = SURFACE_SIDE_STYLE('',(#519215)); +#519215 = SURFACE_STYLE_FILL_AREA(#519216); +#519216 = FILL_AREA_STYLE('',(#519217)); +#519217 = FILL_AREA_STYLE_COLOUR('',#517768); +#519218 = CURVE_STYLE('',#519219,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519220 = STYLED_ITEM('color',(#519221),#5153); +#519221 = PRESENTATION_STYLE_ASSIGNMENT((#519222,#519227)); +#519222 = SURFACE_STYLE_USAGE(.BOTH.,#519223); +#519223 = SURFACE_SIDE_STYLE('',(#519224)); +#519224 = SURFACE_STYLE_FILL_AREA(#519225); +#519225 = FILL_AREA_STYLE('',(#519226)); +#519226 = FILL_AREA_STYLE_COLOUR('',#512501); +#519227 = CURVE_STYLE('',#519228,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519229 = STYLED_ITEM('color',(#519230),#5177); +#519230 = PRESENTATION_STYLE_ASSIGNMENT((#519231,#519236)); +#519231 = SURFACE_STYLE_USAGE(.BOTH.,#519232); +#519232 = SURFACE_SIDE_STYLE('',(#519233)); +#519233 = SURFACE_STYLE_FILL_AREA(#519234); +#519234 = FILL_AREA_STYLE('',(#519235)); +#519235 = FILL_AREA_STYLE_COLOUR('',#512501); +#519236 = CURVE_STYLE('',#519237,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519238 = OVER_RIDING_STYLED_ITEM('overriding color',(#519239),#5191, + #519229); +#519239 = PRESENTATION_STYLE_ASSIGNMENT((#519240,#519245)); +#519240 = SURFACE_STYLE_USAGE(.BOTH.,#519241); +#519241 = SURFACE_SIDE_STYLE('',(#519242)); +#519242 = SURFACE_STYLE_FILL_AREA(#519243); +#519243 = FILL_AREA_STYLE('',(#519244)); +#519244 = FILL_AREA_STYLE_COLOUR('',#517768); +#519245 = CURVE_STYLE('',#519246,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519247 = OVER_RIDING_STYLED_ITEM('overriding color',(#519248),#5207, + #519229); +#519248 = PRESENTATION_STYLE_ASSIGNMENT((#519249,#519254)); +#519249 = SURFACE_STYLE_USAGE(.BOTH.,#519250); +#519250 = SURFACE_SIDE_STYLE('',(#519251)); +#519251 = SURFACE_STYLE_FILL_AREA(#519252); +#519252 = FILL_AREA_STYLE('',(#519253)); +#519253 = FILL_AREA_STYLE_COLOUR('',#517768); +#519254 = CURVE_STYLE('',#519255,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519256 = STYLED_ITEM('color',(#519257),#5226); +#519257 = PRESENTATION_STYLE_ASSIGNMENT((#519258,#519263)); +#519258 = SURFACE_STYLE_USAGE(.BOTH.,#519259); +#519259 = SURFACE_SIDE_STYLE('',(#519260)); +#519260 = SURFACE_STYLE_FILL_AREA(#519261); +#519261 = FILL_AREA_STYLE('',(#519262)); +#519262 = FILL_AREA_STYLE_COLOUR('',#512501); +#519263 = CURVE_STYLE('',#519264,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519265 = STYLED_ITEM('color',(#519266),#5257); +#519266 = PRESENTATION_STYLE_ASSIGNMENT((#519267,#519272)); +#519267 = SURFACE_STYLE_USAGE(.BOTH.,#519268); +#519268 = SURFACE_SIDE_STYLE('',(#519269)); +#519269 = SURFACE_STYLE_FILL_AREA(#519270); +#519270 = FILL_AREA_STYLE('',(#519271)); +#519271 = FILL_AREA_STYLE_COLOUR('',#512501); +#519272 = CURVE_STYLE('',#519273,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519274 = OVER_RIDING_STYLED_ITEM('overriding color',(#519275),#5271, + #519265); +#519275 = PRESENTATION_STYLE_ASSIGNMENT((#519276,#519281)); +#519276 = SURFACE_STYLE_USAGE(.BOTH.,#519277); +#519277 = SURFACE_SIDE_STYLE('',(#519278)); +#519278 = SURFACE_STYLE_FILL_AREA(#519279); +#519279 = FILL_AREA_STYLE('',(#519280)); +#519280 = FILL_AREA_STYLE_COLOUR('',#517768); +#519281 = CURVE_STYLE('',#519282,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519283 = OVER_RIDING_STYLED_ITEM('overriding color',(#519284),#5287, + #519265); +#519284 = PRESENTATION_STYLE_ASSIGNMENT((#519285,#519290)); +#519285 = SURFACE_STYLE_USAGE(.BOTH.,#519286); +#519286 = SURFACE_SIDE_STYLE('',(#519287)); +#519287 = SURFACE_STYLE_FILL_AREA(#519288); +#519288 = FILL_AREA_STYLE('',(#519289)); +#519289 = FILL_AREA_STYLE_COLOUR('',#517768); +#519290 = CURVE_STYLE('',#519291,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519292 = STYLED_ITEM('color',(#519293),#5313); +#519293 = PRESENTATION_STYLE_ASSIGNMENT((#519294,#519299)); +#519294 = SURFACE_STYLE_USAGE(.BOTH.,#519295); +#519295 = SURFACE_SIDE_STYLE('',(#519296)); +#519296 = SURFACE_STYLE_FILL_AREA(#519297); +#519297 = FILL_AREA_STYLE('',(#519298)); +#519298 = FILL_AREA_STYLE_COLOUR('',#512501); +#519299 = CURVE_STYLE('',#519300,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519301 = STYLED_ITEM('color',(#519302),#5337); +#519302 = PRESENTATION_STYLE_ASSIGNMENT((#519303,#519308)); +#519303 = SURFACE_STYLE_USAGE(.BOTH.,#519304); +#519304 = SURFACE_SIDE_STYLE('',(#519305)); +#519305 = SURFACE_STYLE_FILL_AREA(#519306); +#519306 = FILL_AREA_STYLE('',(#519307)); +#519307 = FILL_AREA_STYLE_COLOUR('',#512501); +#519308 = CURVE_STYLE('',#519309,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519310 = OVER_RIDING_STYLED_ITEM('overriding color',(#519311),#5351, + #519301); +#519311 = PRESENTATION_STYLE_ASSIGNMENT((#519312,#519317)); +#519312 = SURFACE_STYLE_USAGE(.BOTH.,#519313); +#519313 = SURFACE_SIDE_STYLE('',(#519314)); +#519314 = SURFACE_STYLE_FILL_AREA(#519315); +#519315 = FILL_AREA_STYLE('',(#519316)); +#519316 = FILL_AREA_STYLE_COLOUR('',#517768); +#519317 = CURVE_STYLE('',#519318,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519319 = OVER_RIDING_STYLED_ITEM('overriding color',(#519320),#5367, + #519301); +#519320 = PRESENTATION_STYLE_ASSIGNMENT((#519321,#519326)); +#519321 = SURFACE_STYLE_USAGE(.BOTH.,#519322); +#519322 = SURFACE_SIDE_STYLE('',(#519323)); +#519323 = SURFACE_STYLE_FILL_AREA(#519324); +#519324 = FILL_AREA_STYLE('',(#519325)); +#519325 = FILL_AREA_STYLE_COLOUR('',#517768); +#519326 = CURVE_STYLE('',#519327,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519328 = STYLED_ITEM('color',(#519329),#5386); +#519329 = PRESENTATION_STYLE_ASSIGNMENT((#519330,#519335)); +#519330 = SURFACE_STYLE_USAGE(.BOTH.,#519331); +#519331 = SURFACE_SIDE_STYLE('',(#519332)); +#519332 = SURFACE_STYLE_FILL_AREA(#519333); +#519333 = FILL_AREA_STYLE('',(#519334)); +#519334 = FILL_AREA_STYLE_COLOUR('',#512501); +#519335 = CURVE_STYLE('',#519336,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519337 = STYLED_ITEM('color',(#519338),#5417); +#519338 = PRESENTATION_STYLE_ASSIGNMENT((#519339,#519344)); +#519339 = SURFACE_STYLE_USAGE(.BOTH.,#519340); +#519340 = SURFACE_SIDE_STYLE('',(#519341)); +#519341 = SURFACE_STYLE_FILL_AREA(#519342); +#519342 = FILL_AREA_STYLE('',(#519343)); +#519343 = FILL_AREA_STYLE_COLOUR('',#512501); +#519344 = CURVE_STYLE('',#519345,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519346 = OVER_RIDING_STYLED_ITEM('overriding color',(#519347),#5431, + #519337); +#519347 = PRESENTATION_STYLE_ASSIGNMENT((#519348,#519353)); +#519348 = SURFACE_STYLE_USAGE(.BOTH.,#519349); +#519349 = SURFACE_SIDE_STYLE('',(#519350)); +#519350 = SURFACE_STYLE_FILL_AREA(#519351); +#519351 = FILL_AREA_STYLE('',(#519352)); +#519352 = FILL_AREA_STYLE_COLOUR('',#517768); +#519353 = CURVE_STYLE('',#519354,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519355 = OVER_RIDING_STYLED_ITEM('overriding color',(#519356),#5447, + #519337); +#519356 = PRESENTATION_STYLE_ASSIGNMENT((#519357,#519362)); +#519357 = SURFACE_STYLE_USAGE(.BOTH.,#519358); +#519358 = SURFACE_SIDE_STYLE('',(#519359)); +#519359 = SURFACE_STYLE_FILL_AREA(#519360); +#519360 = FILL_AREA_STYLE('',(#519361)); +#519361 = FILL_AREA_STYLE_COLOUR('',#517768); +#519362 = CURVE_STYLE('',#519363,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519364 = STYLED_ITEM('color',(#519365),#5473); +#519365 = PRESENTATION_STYLE_ASSIGNMENT((#519366,#519371)); +#519366 = SURFACE_STYLE_USAGE(.BOTH.,#519367); +#519367 = SURFACE_SIDE_STYLE('',(#519368)); +#519368 = SURFACE_STYLE_FILL_AREA(#519369); +#519369 = FILL_AREA_STYLE('',(#519370)); +#519370 = FILL_AREA_STYLE_COLOUR('',#512501); +#519371 = CURVE_STYLE('',#519372,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519373 = STYLED_ITEM('color',(#519374),#5497); +#519374 = PRESENTATION_STYLE_ASSIGNMENT((#519375,#519380)); +#519375 = SURFACE_STYLE_USAGE(.BOTH.,#519376); +#519376 = SURFACE_SIDE_STYLE('',(#519377)); +#519377 = SURFACE_STYLE_FILL_AREA(#519378); +#519378 = FILL_AREA_STYLE('',(#519379)); +#519379 = FILL_AREA_STYLE_COLOUR('',#512501); +#519380 = CURVE_STYLE('',#519381,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519382 = OVER_RIDING_STYLED_ITEM('overriding color',(#519383),#5511, + #519373); +#519383 = PRESENTATION_STYLE_ASSIGNMENT((#519384,#519389)); +#519384 = SURFACE_STYLE_USAGE(.BOTH.,#519385); +#519385 = SURFACE_SIDE_STYLE('',(#519386)); +#519386 = SURFACE_STYLE_FILL_AREA(#519387); +#519387 = FILL_AREA_STYLE('',(#519388)); +#519388 = FILL_AREA_STYLE_COLOUR('',#517768); +#519389 = CURVE_STYLE('',#519390,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519391 = OVER_RIDING_STYLED_ITEM('overriding color',(#519392),#5527, + #519373); +#519392 = PRESENTATION_STYLE_ASSIGNMENT((#519393,#519398)); +#519393 = SURFACE_STYLE_USAGE(.BOTH.,#519394); +#519394 = SURFACE_SIDE_STYLE('',(#519395)); +#519395 = SURFACE_STYLE_FILL_AREA(#519396); +#519396 = FILL_AREA_STYLE('',(#519397)); +#519397 = FILL_AREA_STYLE_COLOUR('',#517768); +#519398 = CURVE_STYLE('',#519399,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519400 = STYLED_ITEM('color',(#519401),#5546); +#519401 = PRESENTATION_STYLE_ASSIGNMENT((#519402,#519407)); +#519402 = SURFACE_STYLE_USAGE(.BOTH.,#519403); +#519403 = SURFACE_SIDE_STYLE('',(#519404)); +#519404 = SURFACE_STYLE_FILL_AREA(#519405); +#519405 = FILL_AREA_STYLE('',(#519406)); +#519406 = FILL_AREA_STYLE_COLOUR('',#517768); +#519407 = CURVE_STYLE('',#519408,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519409 = STYLED_ITEM('color',(#519410),#5563); +#519410 = PRESENTATION_STYLE_ASSIGNMENT((#519411,#519416)); +#519411 = SURFACE_STYLE_USAGE(.BOTH.,#519412); +#519412 = SURFACE_SIDE_STYLE('',(#519413)); +#519413 = SURFACE_STYLE_FILL_AREA(#519414); +#519414 = FILL_AREA_STYLE('',(#519415)); +#519415 = FILL_AREA_STYLE_COLOUR('',#517768); +#519416 = CURVE_STYLE('',#519417,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519418 = STYLED_ITEM('color',(#519419),#5580); +#519419 = PRESENTATION_STYLE_ASSIGNMENT((#519420,#519425)); +#519420 = SURFACE_STYLE_USAGE(.BOTH.,#519421); +#519421 = SURFACE_SIDE_STYLE('',(#519422)); +#519422 = SURFACE_STYLE_FILL_AREA(#519423); +#519423 = FILL_AREA_STYLE('',(#519424)); +#519424 = FILL_AREA_STYLE_COLOUR('',#517768); +#519425 = CURVE_STYLE('',#519426,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519427 = STYLED_ITEM('color',(#519428),#5597); +#519428 = PRESENTATION_STYLE_ASSIGNMENT((#519429,#519434)); +#519429 = SURFACE_STYLE_USAGE(.BOTH.,#519430); +#519430 = SURFACE_SIDE_STYLE('',(#519431)); +#519431 = SURFACE_STYLE_FILL_AREA(#519432); +#519432 = FILL_AREA_STYLE('',(#519433)); +#519433 = FILL_AREA_STYLE_COLOUR('',#517768); +#519434 = CURVE_STYLE('',#519435,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519436 = STYLED_ITEM('color',(#519437),#5614); +#519437 = PRESENTATION_STYLE_ASSIGNMENT((#519438,#519443)); +#519438 = SURFACE_STYLE_USAGE(.BOTH.,#519439); +#519439 = SURFACE_SIDE_STYLE('',(#519440)); +#519440 = SURFACE_STYLE_FILL_AREA(#519441); +#519441 = FILL_AREA_STYLE('',(#519442)); +#519442 = FILL_AREA_STYLE_COLOUR('',#517768); +#519443 = CURVE_STYLE('',#519444,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519445 = STYLED_ITEM('color',(#519446),#5626); +#519446 = PRESENTATION_STYLE_ASSIGNMENT((#519447,#519452)); +#519447 = SURFACE_STYLE_USAGE(.BOTH.,#519448); +#519448 = SURFACE_SIDE_STYLE('',(#519449)); +#519449 = SURFACE_STYLE_FILL_AREA(#519450); +#519450 = FILL_AREA_STYLE('',(#519451)); +#519451 = FILL_AREA_STYLE_COLOUR('',#517768); +#519452 = CURVE_STYLE('',#519453,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519454 = STYLED_ITEM('color',(#519455),#5643); +#519455 = PRESENTATION_STYLE_ASSIGNMENT((#519456,#519461)); +#519456 = SURFACE_STYLE_USAGE(.BOTH.,#519457); +#519457 = SURFACE_SIDE_STYLE('',(#519458)); +#519458 = SURFACE_STYLE_FILL_AREA(#519459); +#519459 = FILL_AREA_STYLE('',(#519460)); +#519460 = FILL_AREA_STYLE_COLOUR('',#517768); +#519461 = CURVE_STYLE('',#519462,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519463 = STYLED_ITEM('color',(#519464),#5660); +#519464 = PRESENTATION_STYLE_ASSIGNMENT((#519465,#519470)); +#519465 = SURFACE_STYLE_USAGE(.BOTH.,#519466); +#519466 = SURFACE_SIDE_STYLE('',(#519467)); +#519467 = SURFACE_STYLE_FILL_AREA(#519468); +#519468 = FILL_AREA_STYLE('',(#519469)); +#519469 = FILL_AREA_STYLE_COLOUR('',#517768); +#519470 = CURVE_STYLE('',#519471,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519472 = STYLED_ITEM('color',(#519473),#5677); +#519473 = PRESENTATION_STYLE_ASSIGNMENT((#519474,#519479)); +#519474 = SURFACE_STYLE_USAGE(.BOTH.,#519475); +#519475 = SURFACE_SIDE_STYLE('',(#519476)); +#519476 = SURFACE_STYLE_FILL_AREA(#519477); +#519477 = FILL_AREA_STYLE('',(#519478)); +#519478 = FILL_AREA_STYLE_COLOUR('',#517768); +#519479 = CURVE_STYLE('',#519480,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519481 = STYLED_ITEM('color',(#519482),#5694); +#519482 = PRESENTATION_STYLE_ASSIGNMENT((#519483,#519488)); +#519483 = SURFACE_STYLE_USAGE(.BOTH.,#519484); +#519484 = SURFACE_SIDE_STYLE('',(#519485)); +#519485 = SURFACE_STYLE_FILL_AREA(#519486); +#519486 = FILL_AREA_STYLE('',(#519487)); +#519487 = FILL_AREA_STYLE_COLOUR('',#517768); +#519488 = CURVE_STYLE('',#519489,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519490 = STYLED_ITEM('color',(#519491),#5706); +#519491 = PRESENTATION_STYLE_ASSIGNMENT((#519492,#519497)); +#519492 = SURFACE_STYLE_USAGE(.BOTH.,#519493); +#519493 = SURFACE_SIDE_STYLE('',(#519494)); +#519494 = SURFACE_STYLE_FILL_AREA(#519495); +#519495 = FILL_AREA_STYLE('',(#519496)); +#519496 = FILL_AREA_STYLE_COLOUR('',#517768); +#519497 = CURVE_STYLE('',#519498,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519499 = STYLED_ITEM('color',(#519500),#5723); +#519500 = PRESENTATION_STYLE_ASSIGNMENT((#519501,#519506)); +#519501 = SURFACE_STYLE_USAGE(.BOTH.,#519502); +#519502 = SURFACE_SIDE_STYLE('',(#519503)); +#519503 = SURFACE_STYLE_FILL_AREA(#519504); +#519504 = FILL_AREA_STYLE('',(#519505)); +#519505 = FILL_AREA_STYLE_COLOUR('',#517768); +#519506 = CURVE_STYLE('',#519507,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519508 = STYLED_ITEM('color',(#519509),#5740); +#519509 = PRESENTATION_STYLE_ASSIGNMENT((#519510,#519515)); +#519510 = SURFACE_STYLE_USAGE(.BOTH.,#519511); +#519511 = SURFACE_SIDE_STYLE('',(#519512)); +#519512 = SURFACE_STYLE_FILL_AREA(#519513); +#519513 = FILL_AREA_STYLE('',(#519514)); +#519514 = FILL_AREA_STYLE_COLOUR('',#517768); +#519515 = CURVE_STYLE('',#519516,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519517 = STYLED_ITEM('color',(#519518),#5757); +#519518 = PRESENTATION_STYLE_ASSIGNMENT((#519519,#519524)); +#519519 = SURFACE_STYLE_USAGE(.BOTH.,#519520); +#519520 = SURFACE_SIDE_STYLE('',(#519521)); +#519521 = SURFACE_STYLE_FILL_AREA(#519522); +#519522 = FILL_AREA_STYLE('',(#519523)); +#519523 = FILL_AREA_STYLE_COLOUR('',#517768); +#519524 = CURVE_STYLE('',#519525,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519526 = STYLED_ITEM('color',(#519527),#5774); +#519527 = PRESENTATION_STYLE_ASSIGNMENT((#519528,#519533)); +#519528 = SURFACE_STYLE_USAGE(.BOTH.,#519529); +#519529 = SURFACE_SIDE_STYLE('',(#519530)); +#519530 = SURFACE_STYLE_FILL_AREA(#519531); +#519531 = FILL_AREA_STYLE('',(#519532)); +#519532 = FILL_AREA_STYLE_COLOUR('',#517768); +#519533 = CURVE_STYLE('',#519534,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519535 = STYLED_ITEM('color',(#519536),#5786); +#519536 = PRESENTATION_STYLE_ASSIGNMENT((#519537,#519542)); +#519537 = SURFACE_STYLE_USAGE(.BOTH.,#519538); +#519538 = SURFACE_SIDE_STYLE('',(#519539)); +#519539 = SURFACE_STYLE_FILL_AREA(#519540); +#519540 = FILL_AREA_STYLE('',(#519541)); +#519541 = FILL_AREA_STYLE_COLOUR('',#517768); +#519542 = CURVE_STYLE('',#519543,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519544 = STYLED_ITEM('color',(#519545),#5803); +#519545 = PRESENTATION_STYLE_ASSIGNMENT((#519546,#519551)); +#519546 = SURFACE_STYLE_USAGE(.BOTH.,#519547); +#519547 = SURFACE_SIDE_STYLE('',(#519548)); +#519548 = SURFACE_STYLE_FILL_AREA(#519549); +#519549 = FILL_AREA_STYLE('',(#519550)); +#519550 = FILL_AREA_STYLE_COLOUR('',#517768); +#519551 = CURVE_STYLE('',#519552,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519553 = STYLED_ITEM('color',(#519554),#5820); +#519554 = PRESENTATION_STYLE_ASSIGNMENT((#519555,#519560)); +#519555 = SURFACE_STYLE_USAGE(.BOTH.,#519556); +#519556 = SURFACE_SIDE_STYLE('',(#519557)); +#519557 = SURFACE_STYLE_FILL_AREA(#519558); +#519558 = FILL_AREA_STYLE('',(#519559)); +#519559 = FILL_AREA_STYLE_COLOUR('',#517768); +#519560 = CURVE_STYLE('',#519561,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519562 = STYLED_ITEM('color',(#519563),#5837); +#519563 = PRESENTATION_STYLE_ASSIGNMENT((#519564,#519569)); +#519564 = SURFACE_STYLE_USAGE(.BOTH.,#519565); +#519565 = SURFACE_SIDE_STYLE('',(#519566)); +#519566 = SURFACE_STYLE_FILL_AREA(#519567); +#519567 = FILL_AREA_STYLE('',(#519568)); +#519568 = FILL_AREA_STYLE_COLOUR('',#517768); +#519569 = CURVE_STYLE('',#519570,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519571 = STYLED_ITEM('color',(#519572),#5854); +#519572 = PRESENTATION_STYLE_ASSIGNMENT((#519573,#519578)); +#519573 = SURFACE_STYLE_USAGE(.BOTH.,#519574); +#519574 = SURFACE_SIDE_STYLE('',(#519575)); +#519575 = SURFACE_STYLE_FILL_AREA(#519576); +#519576 = FILL_AREA_STYLE('',(#519577)); +#519577 = FILL_AREA_STYLE_COLOUR('',#517768); +#519578 = CURVE_STYLE('',#519579,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519580 = STYLED_ITEM('color',(#519581),#5866); +#519581 = PRESENTATION_STYLE_ASSIGNMENT((#519582,#519587)); +#519582 = SURFACE_STYLE_USAGE(.BOTH.,#519583); +#519583 = SURFACE_SIDE_STYLE('',(#519584)); +#519584 = SURFACE_STYLE_FILL_AREA(#519585); +#519585 = FILL_AREA_STYLE('',(#519586)); +#519586 = FILL_AREA_STYLE_COLOUR('',#517768); +#519587 = CURVE_STYLE('',#519588,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519589 = STYLED_ITEM('color',(#519590),#5883); +#519590 = PRESENTATION_STYLE_ASSIGNMENT((#519591,#519596)); +#519591 = SURFACE_STYLE_USAGE(.BOTH.,#519592); +#519592 = SURFACE_SIDE_STYLE('',(#519593)); +#519593 = SURFACE_STYLE_FILL_AREA(#519594); +#519594 = FILL_AREA_STYLE('',(#519595)); +#519595 = FILL_AREA_STYLE_COLOUR('',#517768); +#519596 = CURVE_STYLE('',#519597,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519598 = STYLED_ITEM('color',(#519599),#5900); +#519599 = PRESENTATION_STYLE_ASSIGNMENT((#519600,#519605)); +#519600 = SURFACE_STYLE_USAGE(.BOTH.,#519601); +#519601 = SURFACE_SIDE_STYLE('',(#519602)); +#519602 = SURFACE_STYLE_FILL_AREA(#519603); +#519603 = FILL_AREA_STYLE('',(#519604)); +#519604 = FILL_AREA_STYLE_COLOUR('',#517768); +#519605 = CURVE_STYLE('',#519606,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519607 = STYLED_ITEM('color',(#519608),#5917); +#519608 = PRESENTATION_STYLE_ASSIGNMENT((#519609,#519614)); +#519609 = SURFACE_STYLE_USAGE(.BOTH.,#519610); +#519610 = SURFACE_SIDE_STYLE('',(#519611)); +#519611 = SURFACE_STYLE_FILL_AREA(#519612); +#519612 = FILL_AREA_STYLE('',(#519613)); +#519613 = FILL_AREA_STYLE_COLOUR('',#517768); +#519614 = CURVE_STYLE('',#519615,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519616 = STYLED_ITEM('color',(#519617),#5934); +#519617 = PRESENTATION_STYLE_ASSIGNMENT((#519618,#519623)); +#519618 = SURFACE_STYLE_USAGE(.BOTH.,#519619); +#519619 = SURFACE_SIDE_STYLE('',(#519620)); +#519620 = SURFACE_STYLE_FILL_AREA(#519621); +#519621 = FILL_AREA_STYLE('',(#519622)); +#519622 = FILL_AREA_STYLE_COLOUR('',#517768); +#519623 = CURVE_STYLE('',#519624,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519625 = STYLED_ITEM('color',(#519626),#5946); +#519626 = PRESENTATION_STYLE_ASSIGNMENT((#519627,#519632)); +#519627 = SURFACE_STYLE_USAGE(.BOTH.,#519628); +#519628 = SURFACE_SIDE_STYLE('',(#519629)); +#519629 = SURFACE_STYLE_FILL_AREA(#519630); +#519630 = FILL_AREA_STYLE('',(#519631)); +#519631 = FILL_AREA_STYLE_COLOUR('',#517768); +#519632 = CURVE_STYLE('',#519633,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519634 = STYLED_ITEM('color',(#519635),#5963); +#519635 = PRESENTATION_STYLE_ASSIGNMENT((#519636,#519641)); +#519636 = SURFACE_STYLE_USAGE(.BOTH.,#519637); +#519637 = SURFACE_SIDE_STYLE('',(#519638)); +#519638 = SURFACE_STYLE_FILL_AREA(#519639); +#519639 = FILL_AREA_STYLE('',(#519640)); +#519640 = FILL_AREA_STYLE_COLOUR('',#517768); +#519641 = CURVE_STYLE('',#519642,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519643 = STYLED_ITEM('color',(#519644),#5980); +#519644 = PRESENTATION_STYLE_ASSIGNMENT((#519645,#519650)); +#519645 = SURFACE_STYLE_USAGE(.BOTH.,#519646); +#519646 = SURFACE_SIDE_STYLE('',(#519647)); +#519647 = SURFACE_STYLE_FILL_AREA(#519648); +#519648 = FILL_AREA_STYLE('',(#519649)); +#519649 = FILL_AREA_STYLE_COLOUR('',#517768); +#519650 = CURVE_STYLE('',#519651,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519652 = STYLED_ITEM('color',(#519653),#5997); +#519653 = PRESENTATION_STYLE_ASSIGNMENT((#519654,#519659)); +#519654 = SURFACE_STYLE_USAGE(.BOTH.,#519655); +#519655 = SURFACE_SIDE_STYLE('',(#519656)); +#519656 = SURFACE_STYLE_FILL_AREA(#519657); +#519657 = FILL_AREA_STYLE('',(#519658)); +#519658 = FILL_AREA_STYLE_COLOUR('',#517768); +#519659 = CURVE_STYLE('',#519660,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519661 = STYLED_ITEM('color',(#519662),#6014); +#519662 = PRESENTATION_STYLE_ASSIGNMENT((#519663,#519668)); +#519663 = SURFACE_STYLE_USAGE(.BOTH.,#519664); +#519664 = SURFACE_SIDE_STYLE('',(#519665)); +#519665 = SURFACE_STYLE_FILL_AREA(#519666); +#519666 = FILL_AREA_STYLE('',(#519667)); +#519667 = FILL_AREA_STYLE_COLOUR('',#517768); +#519668 = CURVE_STYLE('',#519669,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519670 = STYLED_ITEM('color',(#519671),#6026); +#519671 = PRESENTATION_STYLE_ASSIGNMENT((#519672,#519677)); +#519672 = SURFACE_STYLE_USAGE(.BOTH.,#519673); +#519673 = SURFACE_SIDE_STYLE('',(#519674)); +#519674 = SURFACE_STYLE_FILL_AREA(#519675); +#519675 = FILL_AREA_STYLE('',(#519676)); +#519676 = FILL_AREA_STYLE_COLOUR('',#517768); +#519677 = CURVE_STYLE('',#519678,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519679 = STYLED_ITEM('color',(#519680),#6043); +#519680 = PRESENTATION_STYLE_ASSIGNMENT((#519681,#519686)); +#519681 = SURFACE_STYLE_USAGE(.BOTH.,#519682); +#519682 = SURFACE_SIDE_STYLE('',(#519683)); +#519683 = SURFACE_STYLE_FILL_AREA(#519684); +#519684 = FILL_AREA_STYLE('',(#519685)); +#519685 = FILL_AREA_STYLE_COLOUR('',#517768); +#519686 = CURVE_STYLE('',#519687,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519688 = STYLED_ITEM('color',(#519689),#6060); +#519689 = PRESENTATION_STYLE_ASSIGNMENT((#519690,#519695)); +#519690 = SURFACE_STYLE_USAGE(.BOTH.,#519691); +#519691 = SURFACE_SIDE_STYLE('',(#519692)); +#519692 = SURFACE_STYLE_FILL_AREA(#519693); +#519693 = FILL_AREA_STYLE('',(#519694)); +#519694 = FILL_AREA_STYLE_COLOUR('',#517768); +#519695 = CURVE_STYLE('',#519696,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519697 = STYLED_ITEM('color',(#519698),#6077); +#519698 = PRESENTATION_STYLE_ASSIGNMENT((#519699,#519704)); +#519699 = SURFACE_STYLE_USAGE(.BOTH.,#519700); +#519700 = SURFACE_SIDE_STYLE('',(#519701)); +#519701 = SURFACE_STYLE_FILL_AREA(#519702); +#519702 = FILL_AREA_STYLE('',(#519703)); +#519703 = FILL_AREA_STYLE_COLOUR('',#517768); +#519704 = CURVE_STYLE('',#519705,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519706 = STYLED_ITEM('color',(#519707),#6094); +#519707 = PRESENTATION_STYLE_ASSIGNMENT((#519708,#519713)); +#519708 = SURFACE_STYLE_USAGE(.BOTH.,#519709); +#519709 = SURFACE_SIDE_STYLE('',(#519710)); +#519710 = SURFACE_STYLE_FILL_AREA(#519711); +#519711 = FILL_AREA_STYLE('',(#519712)); +#519712 = FILL_AREA_STYLE_COLOUR('',#517768); +#519713 = CURVE_STYLE('',#519714,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519715 = STYLED_ITEM('color',(#519716),#6106); +#519716 = PRESENTATION_STYLE_ASSIGNMENT((#519717,#519722)); +#519717 = SURFACE_STYLE_USAGE(.BOTH.,#519718); +#519718 = SURFACE_SIDE_STYLE('',(#519719)); +#519719 = SURFACE_STYLE_FILL_AREA(#519720); +#519720 = FILL_AREA_STYLE('',(#519721)); +#519721 = FILL_AREA_STYLE_COLOUR('',#517768); +#519722 = CURVE_STYLE('',#519723,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519724 = STYLED_ITEM('color',(#519725),#6123); +#519725 = PRESENTATION_STYLE_ASSIGNMENT((#519726,#519731)); +#519726 = SURFACE_STYLE_USAGE(.BOTH.,#519727); +#519727 = SURFACE_SIDE_STYLE('',(#519728)); +#519728 = SURFACE_STYLE_FILL_AREA(#519729); +#519729 = FILL_AREA_STYLE('',(#519730)); +#519730 = FILL_AREA_STYLE_COLOUR('',#517768); +#519731 = CURVE_STYLE('',#519732,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519733 = STYLED_ITEM('color',(#519734),#6140); +#519734 = PRESENTATION_STYLE_ASSIGNMENT((#519735,#519740)); +#519735 = SURFACE_STYLE_USAGE(.BOTH.,#519736); +#519736 = SURFACE_SIDE_STYLE('',(#519737)); +#519737 = SURFACE_STYLE_FILL_AREA(#519738); +#519738 = FILL_AREA_STYLE('',(#519739)); +#519739 = FILL_AREA_STYLE_COLOUR('',#517768); +#519740 = CURVE_STYLE('',#519741,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519742 = STYLED_ITEM('color',(#519743),#6157); +#519743 = PRESENTATION_STYLE_ASSIGNMENT((#519744,#519749)); +#519744 = SURFACE_STYLE_USAGE(.BOTH.,#519745); +#519745 = SURFACE_SIDE_STYLE('',(#519746)); +#519746 = SURFACE_STYLE_FILL_AREA(#519747); +#519747 = FILL_AREA_STYLE('',(#519748)); +#519748 = FILL_AREA_STYLE_COLOUR('',#517768); +#519749 = CURVE_STYLE('',#519750,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519751 = STYLED_ITEM('color',(#519752),#6174); +#519752 = PRESENTATION_STYLE_ASSIGNMENT((#519753,#519758)); +#519753 = SURFACE_STYLE_USAGE(.BOTH.,#519754); +#519754 = SURFACE_SIDE_STYLE('',(#519755)); +#519755 = SURFACE_STYLE_FILL_AREA(#519756); +#519756 = FILL_AREA_STYLE('',(#519757)); +#519757 = FILL_AREA_STYLE_COLOUR('',#517768); +#519758 = CURVE_STYLE('',#519759,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519760 = STYLED_ITEM('color',(#519761),#6186); +#519761 = PRESENTATION_STYLE_ASSIGNMENT((#519762,#519767)); +#519762 = SURFACE_STYLE_USAGE(.BOTH.,#519763); +#519763 = SURFACE_SIDE_STYLE('',(#519764)); +#519764 = SURFACE_STYLE_FILL_AREA(#519765); +#519765 = FILL_AREA_STYLE('',(#519766)); +#519766 = FILL_AREA_STYLE_COLOUR('',#517768); +#519767 = CURVE_STYLE('',#519768,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519769 = STYLED_ITEM('color',(#519770),#6203); +#519770 = PRESENTATION_STYLE_ASSIGNMENT((#519771,#519776)); +#519771 = SURFACE_STYLE_USAGE(.BOTH.,#519772); +#519772 = SURFACE_SIDE_STYLE('',(#519773)); +#519773 = SURFACE_STYLE_FILL_AREA(#519774); +#519774 = FILL_AREA_STYLE('',(#519775)); +#519775 = FILL_AREA_STYLE_COLOUR('',#517768); +#519776 = CURVE_STYLE('',#519777,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519778 = STYLED_ITEM('color',(#519779),#6220); +#519779 = PRESENTATION_STYLE_ASSIGNMENT((#519780,#519785)); +#519780 = SURFACE_STYLE_USAGE(.BOTH.,#519781); +#519781 = SURFACE_SIDE_STYLE('',(#519782)); +#519782 = SURFACE_STYLE_FILL_AREA(#519783); +#519783 = FILL_AREA_STYLE('',(#519784)); +#519784 = FILL_AREA_STYLE_COLOUR('',#517768); +#519785 = CURVE_STYLE('',#519786,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519787 = STYLED_ITEM('color',(#519788),#6237); +#519788 = PRESENTATION_STYLE_ASSIGNMENT((#519789,#519794)); +#519789 = SURFACE_STYLE_USAGE(.BOTH.,#519790); +#519790 = SURFACE_SIDE_STYLE('',(#519791)); +#519791 = SURFACE_STYLE_FILL_AREA(#519792); +#519792 = FILL_AREA_STYLE('',(#519793)); +#519793 = FILL_AREA_STYLE_COLOUR('',#517768); +#519794 = CURVE_STYLE('',#519795,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519796 = STYLED_ITEM('color',(#519797),#6254); +#519797 = PRESENTATION_STYLE_ASSIGNMENT((#519798,#519803)); +#519798 = SURFACE_STYLE_USAGE(.BOTH.,#519799); +#519799 = SURFACE_SIDE_STYLE('',(#519800)); +#519800 = SURFACE_STYLE_FILL_AREA(#519801); +#519801 = FILL_AREA_STYLE('',(#519802)); +#519802 = FILL_AREA_STYLE_COLOUR('',#517768); +#519803 = CURVE_STYLE('',#519804,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519805 = STYLED_ITEM('color',(#519806),#6266); +#519806 = PRESENTATION_STYLE_ASSIGNMENT((#519807,#519812)); +#519807 = SURFACE_STYLE_USAGE(.BOTH.,#519808); +#519808 = SURFACE_SIDE_STYLE('',(#519809)); +#519809 = SURFACE_STYLE_FILL_AREA(#519810); +#519810 = FILL_AREA_STYLE('',(#519811)); +#519811 = FILL_AREA_STYLE_COLOUR('',#517768); +#519812 = CURVE_STYLE('',#519813,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519814 = STYLED_ITEM('color',(#519815),#6283); +#519815 = PRESENTATION_STYLE_ASSIGNMENT((#519816,#519821)); +#519816 = SURFACE_STYLE_USAGE(.BOTH.,#519817); +#519817 = SURFACE_SIDE_STYLE('',(#519818)); +#519818 = SURFACE_STYLE_FILL_AREA(#519819); +#519819 = FILL_AREA_STYLE('',(#519820)); +#519820 = FILL_AREA_STYLE_COLOUR('',#517768); +#519821 = CURVE_STYLE('',#519822,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519823 = STYLED_ITEM('color',(#519824),#6300); +#519824 = PRESENTATION_STYLE_ASSIGNMENT((#519825,#519830)); +#519825 = SURFACE_STYLE_USAGE(.BOTH.,#519826); +#519826 = SURFACE_SIDE_STYLE('',(#519827)); +#519827 = SURFACE_STYLE_FILL_AREA(#519828); +#519828 = FILL_AREA_STYLE('',(#519829)); +#519829 = FILL_AREA_STYLE_COLOUR('',#517768); +#519830 = CURVE_STYLE('',#519831,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519832 = STYLED_ITEM('color',(#519833),#6317); +#519833 = PRESENTATION_STYLE_ASSIGNMENT((#519834,#519839)); +#519834 = SURFACE_STYLE_USAGE(.BOTH.,#519835); +#519835 = SURFACE_SIDE_STYLE('',(#519836)); +#519836 = SURFACE_STYLE_FILL_AREA(#519837); +#519837 = FILL_AREA_STYLE('',(#519838)); +#519838 = FILL_AREA_STYLE_COLOUR('',#517768); +#519839 = CURVE_STYLE('',#519840,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519841 = STYLED_ITEM('color',(#519842),#6334); +#519842 = PRESENTATION_STYLE_ASSIGNMENT((#519843,#519848)); +#519843 = SURFACE_STYLE_USAGE(.BOTH.,#519844); +#519844 = SURFACE_SIDE_STYLE('',(#519845)); +#519845 = SURFACE_STYLE_FILL_AREA(#519846); +#519846 = FILL_AREA_STYLE('',(#519847)); +#519847 = FILL_AREA_STYLE_COLOUR('',#517768); +#519848 = CURVE_STYLE('',#519849,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519850 = STYLED_ITEM('color',(#519851),#6346); +#519851 = PRESENTATION_STYLE_ASSIGNMENT((#519852,#519857)); +#519852 = SURFACE_STYLE_USAGE(.BOTH.,#519853); +#519853 = SURFACE_SIDE_STYLE('',(#519854)); +#519854 = SURFACE_STYLE_FILL_AREA(#519855); +#519855 = FILL_AREA_STYLE('',(#519856)); +#519856 = FILL_AREA_STYLE_COLOUR('',#512501); +#519857 = CURVE_STYLE('',#519858,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519859 = OVER_RIDING_STYLED_ITEM('overriding color',(#519860),#6353, + #519850); +#519860 = PRESENTATION_STYLE_ASSIGNMENT((#519861,#519866)); +#519861 = SURFACE_STYLE_USAGE(.BOTH.,#519862); +#519862 = SURFACE_SIDE_STYLE('',(#519863)); +#519863 = SURFACE_STYLE_FILL_AREA(#519864); +#519864 = FILL_AREA_STYLE('',(#519865)); +#519865 = FILL_AREA_STYLE_COLOUR('',#517768); +#519866 = CURVE_STYLE('',#519867,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519868 = STYLED_ITEM('color',(#519869),#6363); +#519869 = PRESENTATION_STYLE_ASSIGNMENT((#519870,#519875)); +#519870 = SURFACE_STYLE_USAGE(.BOTH.,#519871); +#519871 = SURFACE_SIDE_STYLE('',(#519872)); +#519872 = SURFACE_STYLE_FILL_AREA(#519873); +#519873 = FILL_AREA_STYLE('',(#519874)); +#519874 = FILL_AREA_STYLE_COLOUR('',#512501); +#519875 = CURVE_STYLE('',#519876,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519877 = OVER_RIDING_STYLED_ITEM('overriding color',(#519878),#6368, + #519868); +#519878 = PRESENTATION_STYLE_ASSIGNMENT((#519879,#519884)); +#519879 = SURFACE_STYLE_USAGE(.BOTH.,#519880); +#519880 = SURFACE_SIDE_STYLE('',(#519881)); +#519881 = SURFACE_STYLE_FILL_AREA(#519882); +#519882 = FILL_AREA_STYLE('',(#519883)); +#519883 = FILL_AREA_STYLE_COLOUR('',#517768); +#519884 = CURVE_STYLE('',#519885,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519886 = STYLED_ITEM('color',(#519887),#6380); +#519887 = PRESENTATION_STYLE_ASSIGNMENT((#519888,#519893)); +#519888 = SURFACE_STYLE_USAGE(.BOTH.,#519889); +#519889 = SURFACE_SIDE_STYLE('',(#519890)); +#519890 = SURFACE_STYLE_FILL_AREA(#519891); +#519891 = FILL_AREA_STYLE('',(#519892)); +#519892 = FILL_AREA_STYLE_COLOUR('',#517768); +#519893 = CURVE_STYLE('',#519894,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519895 = STYLED_ITEM('color',(#519896),#6429); +#519896 = PRESENTATION_STYLE_ASSIGNMENT((#519897,#519902)); +#519897 = SURFACE_STYLE_USAGE(.BOTH.,#519898); +#519898 = SURFACE_SIDE_STYLE('',(#519899)); +#519899 = SURFACE_STYLE_FILL_AREA(#519900); +#519900 = FILL_AREA_STYLE('',(#519901)); +#519901 = FILL_AREA_STYLE_COLOUR('',#517768); +#519902 = CURVE_STYLE('',#519903,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519904 = STYLED_ITEM('color',(#519905),#6453); +#519905 = PRESENTATION_STYLE_ASSIGNMENT((#519906,#519911)); +#519906 = SURFACE_STYLE_USAGE(.BOTH.,#519907); +#519907 = SURFACE_SIDE_STYLE('',(#519908)); +#519908 = SURFACE_STYLE_FILL_AREA(#519909); +#519909 = FILL_AREA_STYLE('',(#519910)); +#519910 = FILL_AREA_STYLE_COLOUR('',#517768); +#519911 = CURVE_STYLE('',#519912,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519913 = STYLED_ITEM('color',(#519914),#6495); +#519914 = PRESENTATION_STYLE_ASSIGNMENT((#519915,#519920)); +#519915 = SURFACE_STYLE_USAGE(.BOTH.,#519916); +#519916 = SURFACE_SIDE_STYLE('',(#519917)); +#519917 = SURFACE_STYLE_FILL_AREA(#519918); +#519918 = FILL_AREA_STYLE('',(#519919)); +#519919 = FILL_AREA_STYLE_COLOUR('',#517768); +#519920 = CURVE_STYLE('',#519921,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519922 = STYLED_ITEM('color',(#519923),#6512); +#519923 = PRESENTATION_STYLE_ASSIGNMENT((#519924,#519929)); +#519924 = SURFACE_STYLE_USAGE(.BOTH.,#519925); +#519925 = SURFACE_SIDE_STYLE('',(#519926)); +#519926 = SURFACE_STYLE_FILL_AREA(#519927); +#519927 = FILL_AREA_STYLE('',(#519928)); +#519928 = FILL_AREA_STYLE_COLOUR('',#512501); +#519929 = CURVE_STYLE('',#519930,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519931 = OVER_RIDING_STYLED_ITEM('overriding color',(#519932),#6519, + #519922); +#519932 = PRESENTATION_STYLE_ASSIGNMENT((#519933,#519938)); +#519933 = SURFACE_STYLE_USAGE(.BOTH.,#519934); +#519934 = SURFACE_SIDE_STYLE('',(#519935)); +#519935 = SURFACE_STYLE_FILL_AREA(#519936); +#519936 = FILL_AREA_STYLE('',(#519937)); +#519937 = FILL_AREA_STYLE_COLOUR('',#517768); +#519938 = CURVE_STYLE('',#519939,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519940 = STYLED_ITEM('color',(#519941),#6529); +#519941 = PRESENTATION_STYLE_ASSIGNMENT((#519942,#519947)); +#519942 = SURFACE_STYLE_USAGE(.BOTH.,#519943); +#519943 = SURFACE_SIDE_STYLE('',(#519944)); +#519944 = SURFACE_STYLE_FILL_AREA(#519945); +#519945 = FILL_AREA_STYLE('',(#519946)); +#519946 = FILL_AREA_STYLE_COLOUR('',#512501); +#519947 = CURVE_STYLE('',#519948,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#519948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519949 = OVER_RIDING_STYLED_ITEM('overriding color',(#519950),#6534, + #519940); +#519950 = PRESENTATION_STYLE_ASSIGNMENT((#519951,#519956)); +#519951 = SURFACE_STYLE_USAGE(.BOTH.,#519952); +#519952 = SURFACE_SIDE_STYLE('',(#519953)); +#519953 = SURFACE_STYLE_FILL_AREA(#519954); +#519954 = FILL_AREA_STYLE('',(#519955)); +#519955 = FILL_AREA_STYLE_COLOUR('',#517768); +#519956 = CURVE_STYLE('',#519957,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519958 = STYLED_ITEM('color',(#519959),#6546); +#519959 = PRESENTATION_STYLE_ASSIGNMENT((#519960,#519965)); +#519960 = SURFACE_STYLE_USAGE(.BOTH.,#519961); +#519961 = SURFACE_SIDE_STYLE('',(#519962)); +#519962 = SURFACE_STYLE_FILL_AREA(#519963); +#519963 = FILL_AREA_STYLE('',(#519964)); +#519964 = FILL_AREA_STYLE_COLOUR('',#517768); +#519965 = CURVE_STYLE('',#519966,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519967 = STYLED_ITEM('color',(#519968),#6595); +#519968 = PRESENTATION_STYLE_ASSIGNMENT((#519969,#519974)); +#519969 = SURFACE_STYLE_USAGE(.BOTH.,#519970); +#519970 = SURFACE_SIDE_STYLE('',(#519971)); +#519971 = SURFACE_STYLE_FILL_AREA(#519972); +#519972 = FILL_AREA_STYLE('',(#519973)); +#519973 = FILL_AREA_STYLE_COLOUR('',#517768); +#519974 = CURVE_STYLE('',#519975,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519976 = STYLED_ITEM('color',(#519977),#6619); +#519977 = PRESENTATION_STYLE_ASSIGNMENT((#519978,#519983)); +#519978 = SURFACE_STYLE_USAGE(.BOTH.,#519979); +#519979 = SURFACE_SIDE_STYLE('',(#519980)); +#519980 = SURFACE_STYLE_FILL_AREA(#519981); +#519981 = FILL_AREA_STYLE('',(#519982)); +#519982 = FILL_AREA_STYLE_COLOUR('',#517768); +#519983 = CURVE_STYLE('',#519984,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519985 = STYLED_ITEM('color',(#519986),#6661); +#519986 = PRESENTATION_STYLE_ASSIGNMENT((#519987,#519992)); +#519987 = SURFACE_STYLE_USAGE(.BOTH.,#519988); +#519988 = SURFACE_SIDE_STYLE('',(#519989)); +#519989 = SURFACE_STYLE_FILL_AREA(#519990); +#519990 = FILL_AREA_STYLE('',(#519991)); +#519991 = FILL_AREA_STYLE_COLOUR('',#517768); +#519992 = CURVE_STYLE('',#519993,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#519993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#519994 = STYLED_ITEM('color',(#519995),#6678); +#519995 = PRESENTATION_STYLE_ASSIGNMENT((#519996,#520001)); +#519996 = SURFACE_STYLE_USAGE(.BOTH.,#519997); +#519997 = SURFACE_SIDE_STYLE('',(#519998)); +#519998 = SURFACE_STYLE_FILL_AREA(#519999); +#519999 = FILL_AREA_STYLE('',(#520000)); +#520000 = FILL_AREA_STYLE_COLOUR('',#512501); +#520001 = CURVE_STYLE('',#520002,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520003 = OVER_RIDING_STYLED_ITEM('overriding color',(#520004),#6685, + #519994); +#520004 = PRESENTATION_STYLE_ASSIGNMENT((#520005,#520010)); +#520005 = SURFACE_STYLE_USAGE(.BOTH.,#520006); +#520006 = SURFACE_SIDE_STYLE('',(#520007)); +#520007 = SURFACE_STYLE_FILL_AREA(#520008); +#520008 = FILL_AREA_STYLE('',(#520009)); +#520009 = FILL_AREA_STYLE_COLOUR('',#517768); +#520010 = CURVE_STYLE('',#520011,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520012 = STYLED_ITEM('color',(#520013),#6695); +#520013 = PRESENTATION_STYLE_ASSIGNMENT((#520014,#520019)); +#520014 = SURFACE_STYLE_USAGE(.BOTH.,#520015); +#520015 = SURFACE_SIDE_STYLE('',(#520016)); +#520016 = SURFACE_STYLE_FILL_AREA(#520017); +#520017 = FILL_AREA_STYLE('',(#520018)); +#520018 = FILL_AREA_STYLE_COLOUR('',#512501); +#520019 = CURVE_STYLE('',#520020,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520021 = OVER_RIDING_STYLED_ITEM('overriding color',(#520022),#6700, + #520012); +#520022 = PRESENTATION_STYLE_ASSIGNMENT((#520023,#520028)); +#520023 = SURFACE_STYLE_USAGE(.BOTH.,#520024); +#520024 = SURFACE_SIDE_STYLE('',(#520025)); +#520025 = SURFACE_STYLE_FILL_AREA(#520026); +#520026 = FILL_AREA_STYLE('',(#520027)); +#520027 = FILL_AREA_STYLE_COLOUR('',#517768); +#520028 = CURVE_STYLE('',#520029,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520030 = STYLED_ITEM('color',(#520031),#6712); +#520031 = PRESENTATION_STYLE_ASSIGNMENT((#520032,#520037)); +#520032 = SURFACE_STYLE_USAGE(.BOTH.,#520033); +#520033 = SURFACE_SIDE_STYLE('',(#520034)); +#520034 = SURFACE_STYLE_FILL_AREA(#520035); +#520035 = FILL_AREA_STYLE('',(#520036)); +#520036 = FILL_AREA_STYLE_COLOUR('',#517768); +#520037 = CURVE_STYLE('',#520038,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520039 = STYLED_ITEM('color',(#520040),#6761); +#520040 = PRESENTATION_STYLE_ASSIGNMENT((#520041,#520046)); +#520041 = SURFACE_STYLE_USAGE(.BOTH.,#520042); +#520042 = SURFACE_SIDE_STYLE('',(#520043)); +#520043 = SURFACE_STYLE_FILL_AREA(#520044); +#520044 = FILL_AREA_STYLE('',(#520045)); +#520045 = FILL_AREA_STYLE_COLOUR('',#517768); +#520046 = CURVE_STYLE('',#520047,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520048 = STYLED_ITEM('color',(#520049),#6785); +#520049 = PRESENTATION_STYLE_ASSIGNMENT((#520050,#520055)); +#520050 = SURFACE_STYLE_USAGE(.BOTH.,#520051); +#520051 = SURFACE_SIDE_STYLE('',(#520052)); +#520052 = SURFACE_STYLE_FILL_AREA(#520053); +#520053 = FILL_AREA_STYLE('',(#520054)); +#520054 = FILL_AREA_STYLE_COLOUR('',#517768); +#520055 = CURVE_STYLE('',#520056,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520057 = STYLED_ITEM('color',(#520058),#6827); +#520058 = PRESENTATION_STYLE_ASSIGNMENT((#520059,#520064)); +#520059 = SURFACE_STYLE_USAGE(.BOTH.,#520060); +#520060 = SURFACE_SIDE_STYLE('',(#520061)); +#520061 = SURFACE_STYLE_FILL_AREA(#520062); +#520062 = FILL_AREA_STYLE('',(#520063)); +#520063 = FILL_AREA_STYLE_COLOUR('',#517768); +#520064 = CURVE_STYLE('',#520065,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520066 = STYLED_ITEM('color',(#520067),#6844); +#520067 = PRESENTATION_STYLE_ASSIGNMENT((#520068,#520073)); +#520068 = SURFACE_STYLE_USAGE(.BOTH.,#520069); +#520069 = SURFACE_SIDE_STYLE('',(#520070)); +#520070 = SURFACE_STYLE_FILL_AREA(#520071); +#520071 = FILL_AREA_STYLE('',(#520072)); +#520072 = FILL_AREA_STYLE_COLOUR('',#512501); +#520073 = CURVE_STYLE('',#520074,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520075 = OVER_RIDING_STYLED_ITEM('overriding color',(#520076),#6851, + #520066); +#520076 = PRESENTATION_STYLE_ASSIGNMENT((#520077,#520082)); +#520077 = SURFACE_STYLE_USAGE(.BOTH.,#520078); +#520078 = SURFACE_SIDE_STYLE('',(#520079)); +#520079 = SURFACE_STYLE_FILL_AREA(#520080); +#520080 = FILL_AREA_STYLE('',(#520081)); +#520081 = FILL_AREA_STYLE_COLOUR('',#517768); +#520082 = CURVE_STYLE('',#520083,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520084 = STYLED_ITEM('color',(#520085),#6861); +#520085 = PRESENTATION_STYLE_ASSIGNMENT((#520086,#520091)); +#520086 = SURFACE_STYLE_USAGE(.BOTH.,#520087); +#520087 = SURFACE_SIDE_STYLE('',(#520088)); +#520088 = SURFACE_STYLE_FILL_AREA(#520089); +#520089 = FILL_AREA_STYLE('',(#520090)); +#520090 = FILL_AREA_STYLE_COLOUR('',#512501); +#520091 = CURVE_STYLE('',#520092,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520093 = OVER_RIDING_STYLED_ITEM('overriding color',(#520094),#6866, + #520084); +#520094 = PRESENTATION_STYLE_ASSIGNMENT((#520095,#520100)); +#520095 = SURFACE_STYLE_USAGE(.BOTH.,#520096); +#520096 = SURFACE_SIDE_STYLE('',(#520097)); +#520097 = SURFACE_STYLE_FILL_AREA(#520098); +#520098 = FILL_AREA_STYLE('',(#520099)); +#520099 = FILL_AREA_STYLE_COLOUR('',#517768); +#520100 = CURVE_STYLE('',#520101,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520102 = STYLED_ITEM('color',(#520103),#6878); +#520103 = PRESENTATION_STYLE_ASSIGNMENT((#520104,#520109)); +#520104 = SURFACE_STYLE_USAGE(.BOTH.,#520105); +#520105 = SURFACE_SIDE_STYLE('',(#520106)); +#520106 = SURFACE_STYLE_FILL_AREA(#520107); +#520107 = FILL_AREA_STYLE('',(#520108)); +#520108 = FILL_AREA_STYLE_COLOUR('',#517768); +#520109 = CURVE_STYLE('',#520110,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520111 = STYLED_ITEM('color',(#520112),#6927); +#520112 = PRESENTATION_STYLE_ASSIGNMENT((#520113,#520118)); +#520113 = SURFACE_STYLE_USAGE(.BOTH.,#520114); +#520114 = SURFACE_SIDE_STYLE('',(#520115)); +#520115 = SURFACE_STYLE_FILL_AREA(#520116); +#520116 = FILL_AREA_STYLE('',(#520117)); +#520117 = FILL_AREA_STYLE_COLOUR('',#517768); +#520118 = CURVE_STYLE('',#520119,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520120 = STYLED_ITEM('color',(#520121),#6951); +#520121 = PRESENTATION_STYLE_ASSIGNMENT((#520122,#520127)); +#520122 = SURFACE_STYLE_USAGE(.BOTH.,#520123); +#520123 = SURFACE_SIDE_STYLE('',(#520124)); +#520124 = SURFACE_STYLE_FILL_AREA(#520125); +#520125 = FILL_AREA_STYLE('',(#520126)); +#520126 = FILL_AREA_STYLE_COLOUR('',#517768); +#520127 = CURVE_STYLE('',#520128,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520129 = STYLED_ITEM('color',(#520130),#6993); +#520130 = PRESENTATION_STYLE_ASSIGNMENT((#520131,#520136)); +#520131 = SURFACE_STYLE_USAGE(.BOTH.,#520132); +#520132 = SURFACE_SIDE_STYLE('',(#520133)); +#520133 = SURFACE_STYLE_FILL_AREA(#520134); +#520134 = FILL_AREA_STYLE('',(#520135)); +#520135 = FILL_AREA_STYLE_COLOUR('',#517768); +#520136 = CURVE_STYLE('',#520137,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520138 = STYLED_ITEM('color',(#520139),#7010); +#520139 = PRESENTATION_STYLE_ASSIGNMENT((#520140,#520145)); +#520140 = SURFACE_STYLE_USAGE(.BOTH.,#520141); +#520141 = SURFACE_SIDE_STYLE('',(#520142)); +#520142 = SURFACE_STYLE_FILL_AREA(#520143); +#520143 = FILL_AREA_STYLE('',(#520144)); +#520144 = FILL_AREA_STYLE_COLOUR('',#512501); +#520145 = CURVE_STYLE('',#520146,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520147 = OVER_RIDING_STYLED_ITEM('overriding color',(#520148),#7017, + #520138); +#520148 = PRESENTATION_STYLE_ASSIGNMENT((#520149,#520154)); +#520149 = SURFACE_STYLE_USAGE(.BOTH.,#520150); +#520150 = SURFACE_SIDE_STYLE('',(#520151)); +#520151 = SURFACE_STYLE_FILL_AREA(#520152); +#520152 = FILL_AREA_STYLE('',(#520153)); +#520153 = FILL_AREA_STYLE_COLOUR('',#517768); +#520154 = CURVE_STYLE('',#520155,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520156 = STYLED_ITEM('color',(#520157),#7027); +#520157 = PRESENTATION_STYLE_ASSIGNMENT((#520158,#520163)); +#520158 = SURFACE_STYLE_USAGE(.BOTH.,#520159); +#520159 = SURFACE_SIDE_STYLE('',(#520160)); +#520160 = SURFACE_STYLE_FILL_AREA(#520161); +#520161 = FILL_AREA_STYLE('',(#520162)); +#520162 = FILL_AREA_STYLE_COLOUR('',#512501); +#520163 = CURVE_STYLE('',#520164,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520165 = OVER_RIDING_STYLED_ITEM('overriding color',(#520166),#7032, + #520156); +#520166 = PRESENTATION_STYLE_ASSIGNMENT((#520167,#520172)); +#520167 = SURFACE_STYLE_USAGE(.BOTH.,#520168); +#520168 = SURFACE_SIDE_STYLE('',(#520169)); +#520169 = SURFACE_STYLE_FILL_AREA(#520170); +#520170 = FILL_AREA_STYLE('',(#520171)); +#520171 = FILL_AREA_STYLE_COLOUR('',#517768); +#520172 = CURVE_STYLE('',#520173,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520174 = STYLED_ITEM('color',(#520175),#7044); +#520175 = PRESENTATION_STYLE_ASSIGNMENT((#520176,#520181)); +#520176 = SURFACE_STYLE_USAGE(.BOTH.,#520177); +#520177 = SURFACE_SIDE_STYLE('',(#520178)); +#520178 = SURFACE_STYLE_FILL_AREA(#520179); +#520179 = FILL_AREA_STYLE('',(#520180)); +#520180 = FILL_AREA_STYLE_COLOUR('',#517768); +#520181 = CURVE_STYLE('',#520182,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520183 = STYLED_ITEM('color',(#520184),#7093); +#520184 = PRESENTATION_STYLE_ASSIGNMENT((#520185,#520190)); +#520185 = SURFACE_STYLE_USAGE(.BOTH.,#520186); +#520186 = SURFACE_SIDE_STYLE('',(#520187)); +#520187 = SURFACE_STYLE_FILL_AREA(#520188); +#520188 = FILL_AREA_STYLE('',(#520189)); +#520189 = FILL_AREA_STYLE_COLOUR('',#517768); +#520190 = CURVE_STYLE('',#520191,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520192 = STYLED_ITEM('color',(#520193),#7117); +#520193 = PRESENTATION_STYLE_ASSIGNMENT((#520194,#520199)); +#520194 = SURFACE_STYLE_USAGE(.BOTH.,#520195); +#520195 = SURFACE_SIDE_STYLE('',(#520196)); +#520196 = SURFACE_STYLE_FILL_AREA(#520197); +#520197 = FILL_AREA_STYLE('',(#520198)); +#520198 = FILL_AREA_STYLE_COLOUR('',#517768); +#520199 = CURVE_STYLE('',#520200,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520201 = STYLED_ITEM('color',(#520202),#7159); +#520202 = PRESENTATION_STYLE_ASSIGNMENT((#520203,#520208)); +#520203 = SURFACE_STYLE_USAGE(.BOTH.,#520204); +#520204 = SURFACE_SIDE_STYLE('',(#520205)); +#520205 = SURFACE_STYLE_FILL_AREA(#520206); +#520206 = FILL_AREA_STYLE('',(#520207)); +#520207 = FILL_AREA_STYLE_COLOUR('',#517768); +#520208 = CURVE_STYLE('',#520209,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520210 = STYLED_ITEM('color',(#520211),#7176); +#520211 = PRESENTATION_STYLE_ASSIGNMENT((#520212,#520217)); +#520212 = SURFACE_STYLE_USAGE(.BOTH.,#520213); +#520213 = SURFACE_SIDE_STYLE('',(#520214)); +#520214 = SURFACE_STYLE_FILL_AREA(#520215); +#520215 = FILL_AREA_STYLE('',(#520216)); +#520216 = FILL_AREA_STYLE_COLOUR('',#512501); +#520217 = CURVE_STYLE('',#520218,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520219 = OVER_RIDING_STYLED_ITEM('overriding color',(#520220),#7183, + #520210); +#520220 = PRESENTATION_STYLE_ASSIGNMENT((#520221,#520226)); +#520221 = SURFACE_STYLE_USAGE(.BOTH.,#520222); +#520222 = SURFACE_SIDE_STYLE('',(#520223)); +#520223 = SURFACE_STYLE_FILL_AREA(#520224); +#520224 = FILL_AREA_STYLE('',(#520225)); +#520225 = FILL_AREA_STYLE_COLOUR('',#517768); +#520226 = CURVE_STYLE('',#520227,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520228 = STYLED_ITEM('color',(#520229),#7193); +#520229 = PRESENTATION_STYLE_ASSIGNMENT((#520230,#520235)); +#520230 = SURFACE_STYLE_USAGE(.BOTH.,#520231); +#520231 = SURFACE_SIDE_STYLE('',(#520232)); +#520232 = SURFACE_STYLE_FILL_AREA(#520233); +#520233 = FILL_AREA_STYLE('',(#520234)); +#520234 = FILL_AREA_STYLE_COLOUR('',#512501); +#520235 = CURVE_STYLE('',#520236,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520237 = OVER_RIDING_STYLED_ITEM('overriding color',(#520238),#7198, + #520228); +#520238 = PRESENTATION_STYLE_ASSIGNMENT((#520239,#520244)); +#520239 = SURFACE_STYLE_USAGE(.BOTH.,#520240); +#520240 = SURFACE_SIDE_STYLE('',(#520241)); +#520241 = SURFACE_STYLE_FILL_AREA(#520242); +#520242 = FILL_AREA_STYLE('',(#520243)); +#520243 = FILL_AREA_STYLE_COLOUR('',#517768); +#520244 = CURVE_STYLE('',#520245,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520246 = STYLED_ITEM('color',(#520247),#7210); +#520247 = PRESENTATION_STYLE_ASSIGNMENT((#520248,#520253)); +#520248 = SURFACE_STYLE_USAGE(.BOTH.,#520249); +#520249 = SURFACE_SIDE_STYLE('',(#520250)); +#520250 = SURFACE_STYLE_FILL_AREA(#520251); +#520251 = FILL_AREA_STYLE('',(#520252)); +#520252 = FILL_AREA_STYLE_COLOUR('',#517768); +#520253 = CURVE_STYLE('',#520254,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520255 = STYLED_ITEM('color',(#520256),#7259); +#520256 = PRESENTATION_STYLE_ASSIGNMENT((#520257,#520262)); +#520257 = SURFACE_STYLE_USAGE(.BOTH.,#520258); +#520258 = SURFACE_SIDE_STYLE('',(#520259)); +#520259 = SURFACE_STYLE_FILL_AREA(#520260); +#520260 = FILL_AREA_STYLE('',(#520261)); +#520261 = FILL_AREA_STYLE_COLOUR('',#517768); +#520262 = CURVE_STYLE('',#520263,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520264 = STYLED_ITEM('color',(#520265),#7283); +#520265 = PRESENTATION_STYLE_ASSIGNMENT((#520266,#520271)); +#520266 = SURFACE_STYLE_USAGE(.BOTH.,#520267); +#520267 = SURFACE_SIDE_STYLE('',(#520268)); +#520268 = SURFACE_STYLE_FILL_AREA(#520269); +#520269 = FILL_AREA_STYLE('',(#520270)); +#520270 = FILL_AREA_STYLE_COLOUR('',#517768); +#520271 = CURVE_STYLE('',#520272,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520273 = STYLED_ITEM('color',(#520274),#7325); +#520274 = PRESENTATION_STYLE_ASSIGNMENT((#520275,#520280)); +#520275 = SURFACE_STYLE_USAGE(.BOTH.,#520276); +#520276 = SURFACE_SIDE_STYLE('',(#520277)); +#520277 = SURFACE_STYLE_FILL_AREA(#520278); +#520278 = FILL_AREA_STYLE('',(#520279)); +#520279 = FILL_AREA_STYLE_COLOUR('',#517768); +#520280 = CURVE_STYLE('',#520281,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520282 = STYLED_ITEM('color',(#520283),#7342); +#520283 = PRESENTATION_STYLE_ASSIGNMENT((#520284,#520289)); +#520284 = SURFACE_STYLE_USAGE(.BOTH.,#520285); +#520285 = SURFACE_SIDE_STYLE('',(#520286)); +#520286 = SURFACE_STYLE_FILL_AREA(#520287); +#520287 = FILL_AREA_STYLE('',(#520288)); +#520288 = FILL_AREA_STYLE_COLOUR('',#512501); +#520289 = CURVE_STYLE('',#520290,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520291 = OVER_RIDING_STYLED_ITEM('overriding color',(#520292),#7349, + #520282); +#520292 = PRESENTATION_STYLE_ASSIGNMENT((#520293,#520298)); +#520293 = SURFACE_STYLE_USAGE(.BOTH.,#520294); +#520294 = SURFACE_SIDE_STYLE('',(#520295)); +#520295 = SURFACE_STYLE_FILL_AREA(#520296); +#520296 = FILL_AREA_STYLE('',(#520297)); +#520297 = FILL_AREA_STYLE_COLOUR('',#517768); +#520298 = CURVE_STYLE('',#520299,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520300 = STYLED_ITEM('color',(#520301),#7359); +#520301 = PRESENTATION_STYLE_ASSIGNMENT((#520302,#520307)); +#520302 = SURFACE_STYLE_USAGE(.BOTH.,#520303); +#520303 = SURFACE_SIDE_STYLE('',(#520304)); +#520304 = SURFACE_STYLE_FILL_AREA(#520305); +#520305 = FILL_AREA_STYLE('',(#520306)); +#520306 = FILL_AREA_STYLE_COLOUR('',#512501); +#520307 = CURVE_STYLE('',#520308,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520309 = OVER_RIDING_STYLED_ITEM('overriding color',(#520310),#7364, + #520300); +#520310 = PRESENTATION_STYLE_ASSIGNMENT((#520311,#520316)); +#520311 = SURFACE_STYLE_USAGE(.BOTH.,#520312); +#520312 = SURFACE_SIDE_STYLE('',(#520313)); +#520313 = SURFACE_STYLE_FILL_AREA(#520314); +#520314 = FILL_AREA_STYLE('',(#520315)); +#520315 = FILL_AREA_STYLE_COLOUR('',#517768); +#520316 = CURVE_STYLE('',#520317,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520318 = STYLED_ITEM('color',(#520319),#7376); +#520319 = PRESENTATION_STYLE_ASSIGNMENT((#520320,#520325)); +#520320 = SURFACE_STYLE_USAGE(.BOTH.,#520321); +#520321 = SURFACE_SIDE_STYLE('',(#520322)); +#520322 = SURFACE_STYLE_FILL_AREA(#520323); +#520323 = FILL_AREA_STYLE('',(#520324)); +#520324 = FILL_AREA_STYLE_COLOUR('',#517768); +#520325 = CURVE_STYLE('',#520326,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520327 = STYLED_ITEM('color',(#520328),#7425); +#520328 = PRESENTATION_STYLE_ASSIGNMENT((#520329,#520334)); +#520329 = SURFACE_STYLE_USAGE(.BOTH.,#520330); +#520330 = SURFACE_SIDE_STYLE('',(#520331)); +#520331 = SURFACE_STYLE_FILL_AREA(#520332); +#520332 = FILL_AREA_STYLE('',(#520333)); +#520333 = FILL_AREA_STYLE_COLOUR('',#517768); +#520334 = CURVE_STYLE('',#520335,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520336 = STYLED_ITEM('color',(#520337),#7449); +#520337 = PRESENTATION_STYLE_ASSIGNMENT((#520338,#520343)); +#520338 = SURFACE_STYLE_USAGE(.BOTH.,#520339); +#520339 = SURFACE_SIDE_STYLE('',(#520340)); +#520340 = SURFACE_STYLE_FILL_AREA(#520341); +#520341 = FILL_AREA_STYLE('',(#520342)); +#520342 = FILL_AREA_STYLE_COLOUR('',#517768); +#520343 = CURVE_STYLE('',#520344,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520345 = STYLED_ITEM('color',(#520346),#7491); +#520346 = PRESENTATION_STYLE_ASSIGNMENT((#520347,#520352)); +#520347 = SURFACE_STYLE_USAGE(.BOTH.,#520348); +#520348 = SURFACE_SIDE_STYLE('',(#520349)); +#520349 = SURFACE_STYLE_FILL_AREA(#520350); +#520350 = FILL_AREA_STYLE('',(#520351)); +#520351 = FILL_AREA_STYLE_COLOUR('',#517768); +#520352 = CURVE_STYLE('',#520353,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520354 = STYLED_ITEM('color',(#520355),#7508); +#520355 = PRESENTATION_STYLE_ASSIGNMENT((#520356,#520361)); +#520356 = SURFACE_STYLE_USAGE(.BOTH.,#520357); +#520357 = SURFACE_SIDE_STYLE('',(#520358)); +#520358 = SURFACE_STYLE_FILL_AREA(#520359); +#520359 = FILL_AREA_STYLE('',(#520360)); +#520360 = FILL_AREA_STYLE_COLOUR('',#512501); +#520361 = CURVE_STYLE('',#520362,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520363 = OVER_RIDING_STYLED_ITEM('overriding color',(#520364),#7515, + #520354); +#520364 = PRESENTATION_STYLE_ASSIGNMENT((#520365,#520370)); +#520365 = SURFACE_STYLE_USAGE(.BOTH.,#520366); +#520366 = SURFACE_SIDE_STYLE('',(#520367)); +#520367 = SURFACE_STYLE_FILL_AREA(#520368); +#520368 = FILL_AREA_STYLE('',(#520369)); +#520369 = FILL_AREA_STYLE_COLOUR('',#517768); +#520370 = CURVE_STYLE('',#520371,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520372 = STYLED_ITEM('color',(#520373),#7525); +#520373 = PRESENTATION_STYLE_ASSIGNMENT((#520374,#520379)); +#520374 = SURFACE_STYLE_USAGE(.BOTH.,#520375); +#520375 = SURFACE_SIDE_STYLE('',(#520376)); +#520376 = SURFACE_STYLE_FILL_AREA(#520377); +#520377 = FILL_AREA_STYLE('',(#520378)); +#520378 = FILL_AREA_STYLE_COLOUR('',#512501); +#520379 = CURVE_STYLE('',#520380,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520381 = OVER_RIDING_STYLED_ITEM('overriding color',(#520382),#7530, + #520372); +#520382 = PRESENTATION_STYLE_ASSIGNMENT((#520383,#520388)); +#520383 = SURFACE_STYLE_USAGE(.BOTH.,#520384); +#520384 = SURFACE_SIDE_STYLE('',(#520385)); +#520385 = SURFACE_STYLE_FILL_AREA(#520386); +#520386 = FILL_AREA_STYLE('',(#520387)); +#520387 = FILL_AREA_STYLE_COLOUR('',#517768); +#520388 = CURVE_STYLE('',#520389,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520390 = STYLED_ITEM('color',(#520391),#7542); +#520391 = PRESENTATION_STYLE_ASSIGNMENT((#520392,#520397)); +#520392 = SURFACE_STYLE_USAGE(.BOTH.,#520393); +#520393 = SURFACE_SIDE_STYLE('',(#520394)); +#520394 = SURFACE_STYLE_FILL_AREA(#520395); +#520395 = FILL_AREA_STYLE('',(#520396)); +#520396 = FILL_AREA_STYLE_COLOUR('',#517768); +#520397 = CURVE_STYLE('',#520398,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520399 = STYLED_ITEM('color',(#520400),#7591); +#520400 = PRESENTATION_STYLE_ASSIGNMENT((#520401,#520406)); +#520401 = SURFACE_STYLE_USAGE(.BOTH.,#520402); +#520402 = SURFACE_SIDE_STYLE('',(#520403)); +#520403 = SURFACE_STYLE_FILL_AREA(#520404); +#520404 = FILL_AREA_STYLE('',(#520405)); +#520405 = FILL_AREA_STYLE_COLOUR('',#517768); +#520406 = CURVE_STYLE('',#520407,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520408 = STYLED_ITEM('color',(#520409),#7615); +#520409 = PRESENTATION_STYLE_ASSIGNMENT((#520410,#520415)); +#520410 = SURFACE_STYLE_USAGE(.BOTH.,#520411); +#520411 = SURFACE_SIDE_STYLE('',(#520412)); +#520412 = SURFACE_STYLE_FILL_AREA(#520413); +#520413 = FILL_AREA_STYLE('',(#520414)); +#520414 = FILL_AREA_STYLE_COLOUR('',#517768); +#520415 = CURVE_STYLE('',#520416,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520417 = STYLED_ITEM('color',(#520418),#7657); +#520418 = PRESENTATION_STYLE_ASSIGNMENT((#520419,#520424)); +#520419 = SURFACE_STYLE_USAGE(.BOTH.,#520420); +#520420 = SURFACE_SIDE_STYLE('',(#520421)); +#520421 = SURFACE_STYLE_FILL_AREA(#520422); +#520422 = FILL_AREA_STYLE('',(#520423)); +#520423 = FILL_AREA_STYLE_COLOUR('',#517768); +#520424 = CURVE_STYLE('',#520425,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520426 = STYLED_ITEM('color',(#520427),#7674); +#520427 = PRESENTATION_STYLE_ASSIGNMENT((#520428,#520433)); +#520428 = SURFACE_STYLE_USAGE(.BOTH.,#520429); +#520429 = SURFACE_SIDE_STYLE('',(#520430)); +#520430 = SURFACE_STYLE_FILL_AREA(#520431); +#520431 = FILL_AREA_STYLE('',(#520432)); +#520432 = FILL_AREA_STYLE_COLOUR('',#512501); +#520433 = CURVE_STYLE('',#520434,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520435 = OVER_RIDING_STYLED_ITEM('overriding color',(#520436),#7681, + #520426); +#520436 = PRESENTATION_STYLE_ASSIGNMENT((#520437,#520442)); +#520437 = SURFACE_STYLE_USAGE(.BOTH.,#520438); +#520438 = SURFACE_SIDE_STYLE('',(#520439)); +#520439 = SURFACE_STYLE_FILL_AREA(#520440); +#520440 = FILL_AREA_STYLE('',(#520441)); +#520441 = FILL_AREA_STYLE_COLOUR('',#517768); +#520442 = CURVE_STYLE('',#520443,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520444 = STYLED_ITEM('color',(#520445),#7691); +#520445 = PRESENTATION_STYLE_ASSIGNMENT((#520446,#520451)); +#520446 = SURFACE_STYLE_USAGE(.BOTH.,#520447); +#520447 = SURFACE_SIDE_STYLE('',(#520448)); +#520448 = SURFACE_STYLE_FILL_AREA(#520449); +#520449 = FILL_AREA_STYLE('',(#520450)); +#520450 = FILL_AREA_STYLE_COLOUR('',#512501); +#520451 = CURVE_STYLE('',#520452,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520453 = OVER_RIDING_STYLED_ITEM('overriding color',(#520454),#7696, + #520444); +#520454 = PRESENTATION_STYLE_ASSIGNMENT((#520455,#520460)); +#520455 = SURFACE_STYLE_USAGE(.BOTH.,#520456); +#520456 = SURFACE_SIDE_STYLE('',(#520457)); +#520457 = SURFACE_STYLE_FILL_AREA(#520458); +#520458 = FILL_AREA_STYLE('',(#520459)); +#520459 = FILL_AREA_STYLE_COLOUR('',#517768); +#520460 = CURVE_STYLE('',#520461,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520462 = STYLED_ITEM('color',(#520463),#7708); +#520463 = PRESENTATION_STYLE_ASSIGNMENT((#520464,#520469)); +#520464 = SURFACE_STYLE_USAGE(.BOTH.,#520465); +#520465 = SURFACE_SIDE_STYLE('',(#520466)); +#520466 = SURFACE_STYLE_FILL_AREA(#520467); +#520467 = FILL_AREA_STYLE('',(#520468)); +#520468 = FILL_AREA_STYLE_COLOUR('',#517768); +#520469 = CURVE_STYLE('',#520470,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520471 = STYLED_ITEM('color',(#520472),#7757); +#520472 = PRESENTATION_STYLE_ASSIGNMENT((#520473,#520478)); +#520473 = SURFACE_STYLE_USAGE(.BOTH.,#520474); +#520474 = SURFACE_SIDE_STYLE('',(#520475)); +#520475 = SURFACE_STYLE_FILL_AREA(#520476); +#520476 = FILL_AREA_STYLE('',(#520477)); +#520477 = FILL_AREA_STYLE_COLOUR('',#517768); +#520478 = CURVE_STYLE('',#520479,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520480 = STYLED_ITEM('color',(#520481),#7781); +#520481 = PRESENTATION_STYLE_ASSIGNMENT((#520482,#520487)); +#520482 = SURFACE_STYLE_USAGE(.BOTH.,#520483); +#520483 = SURFACE_SIDE_STYLE('',(#520484)); +#520484 = SURFACE_STYLE_FILL_AREA(#520485); +#520485 = FILL_AREA_STYLE('',(#520486)); +#520486 = FILL_AREA_STYLE_COLOUR('',#517768); +#520487 = CURVE_STYLE('',#520488,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520489 = STYLED_ITEM('color',(#520490),#7823); +#520490 = PRESENTATION_STYLE_ASSIGNMENT((#520491,#520496)); +#520491 = SURFACE_STYLE_USAGE(.BOTH.,#520492); +#520492 = SURFACE_SIDE_STYLE('',(#520493)); +#520493 = SURFACE_STYLE_FILL_AREA(#520494); +#520494 = FILL_AREA_STYLE('',(#520495)); +#520495 = FILL_AREA_STYLE_COLOUR('',#517768); +#520496 = CURVE_STYLE('',#520497,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520498 = STYLED_ITEM('color',(#520499),#7840); +#520499 = PRESENTATION_STYLE_ASSIGNMENT((#520500,#520505)); +#520500 = SURFACE_STYLE_USAGE(.BOTH.,#520501); +#520501 = SURFACE_SIDE_STYLE('',(#520502)); +#520502 = SURFACE_STYLE_FILL_AREA(#520503); +#520503 = FILL_AREA_STYLE('',(#520504)); +#520504 = FILL_AREA_STYLE_COLOUR('',#512501); +#520505 = CURVE_STYLE('',#520506,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520507 = OVER_RIDING_STYLED_ITEM('overriding color',(#520508),#7847, + #520498); +#520508 = PRESENTATION_STYLE_ASSIGNMENT((#520509,#520514)); +#520509 = SURFACE_STYLE_USAGE(.BOTH.,#520510); +#520510 = SURFACE_SIDE_STYLE('',(#520511)); +#520511 = SURFACE_STYLE_FILL_AREA(#520512); +#520512 = FILL_AREA_STYLE('',(#520513)); +#520513 = FILL_AREA_STYLE_COLOUR('',#517768); +#520514 = CURVE_STYLE('',#520515,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520516 = STYLED_ITEM('color',(#520517),#7857); +#520517 = PRESENTATION_STYLE_ASSIGNMENT((#520518,#520523)); +#520518 = SURFACE_STYLE_USAGE(.BOTH.,#520519); +#520519 = SURFACE_SIDE_STYLE('',(#520520)); +#520520 = SURFACE_STYLE_FILL_AREA(#520521); +#520521 = FILL_AREA_STYLE('',(#520522)); +#520522 = FILL_AREA_STYLE_COLOUR('',#512501); +#520523 = CURVE_STYLE('',#520524,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#520524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520525 = OVER_RIDING_STYLED_ITEM('overriding color',(#520526),#7862, + #520516); +#520526 = PRESENTATION_STYLE_ASSIGNMENT((#520527,#520532)); +#520527 = SURFACE_STYLE_USAGE(.BOTH.,#520528); +#520528 = SURFACE_SIDE_STYLE('',(#520529)); +#520529 = SURFACE_STYLE_FILL_AREA(#520530); +#520530 = FILL_AREA_STYLE('',(#520531)); +#520531 = FILL_AREA_STYLE_COLOUR('',#517768); +#520532 = CURVE_STYLE('',#520533,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520533 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520534 = STYLED_ITEM('color',(#520535),#7874); +#520535 = PRESENTATION_STYLE_ASSIGNMENT((#520536,#520541)); +#520536 = SURFACE_STYLE_USAGE(.BOTH.,#520537); +#520537 = SURFACE_SIDE_STYLE('',(#520538)); +#520538 = SURFACE_STYLE_FILL_AREA(#520539); +#520539 = FILL_AREA_STYLE('',(#520540)); +#520540 = FILL_AREA_STYLE_COLOUR('',#517768); +#520541 = CURVE_STYLE('',#520542,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520542 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520543 = STYLED_ITEM('color',(#520544),#7923); +#520544 = PRESENTATION_STYLE_ASSIGNMENT((#520545,#520550)); +#520545 = SURFACE_STYLE_USAGE(.BOTH.,#520546); +#520546 = SURFACE_SIDE_STYLE('',(#520547)); +#520547 = SURFACE_STYLE_FILL_AREA(#520548); +#520548 = FILL_AREA_STYLE('',(#520549)); +#520549 = FILL_AREA_STYLE_COLOUR('',#517768); +#520550 = CURVE_STYLE('',#520551,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520551 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520552 = STYLED_ITEM('color',(#520553),#7947); +#520553 = PRESENTATION_STYLE_ASSIGNMENT((#520554,#520559)); +#520554 = SURFACE_STYLE_USAGE(.BOTH.,#520555); +#520555 = SURFACE_SIDE_STYLE('',(#520556)); +#520556 = SURFACE_STYLE_FILL_AREA(#520557); +#520557 = FILL_AREA_STYLE('',(#520558)); +#520558 = FILL_AREA_STYLE_COLOUR('',#517768); +#520559 = CURVE_STYLE('',#520560,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520561 = STYLED_ITEM('color',(#520562),#7989); +#520562 = PRESENTATION_STYLE_ASSIGNMENT((#520563,#520568)); +#520563 = SURFACE_STYLE_USAGE(.BOTH.,#520564); +#520564 = SURFACE_SIDE_STYLE('',(#520565)); +#520565 = SURFACE_STYLE_FILL_AREA(#520566); +#520566 = FILL_AREA_STYLE('',(#520567)); +#520567 = FILL_AREA_STYLE_COLOUR('',#517768); +#520568 = CURVE_STYLE('',#520569,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520569 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520570 = STYLED_ITEM('color',(#520571),#8006); +#520571 = PRESENTATION_STYLE_ASSIGNMENT((#520572,#520577)); +#520572 = SURFACE_STYLE_USAGE(.BOTH.,#520573); +#520573 = SURFACE_SIDE_STYLE('',(#520574)); +#520574 = SURFACE_STYLE_FILL_AREA(#520575); +#520575 = FILL_AREA_STYLE('',(#520576)); +#520576 = FILL_AREA_STYLE_COLOUR('',#517768); +#520577 = CURVE_STYLE('',#520578,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520578 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520579 = STYLED_ITEM('color',(#520580),#8023); +#520580 = PRESENTATION_STYLE_ASSIGNMENT((#520581,#520586)); +#520581 = SURFACE_STYLE_USAGE(.BOTH.,#520582); +#520582 = SURFACE_SIDE_STYLE('',(#520583)); +#520583 = SURFACE_STYLE_FILL_AREA(#520584); +#520584 = FILL_AREA_STYLE('',(#520585)); +#520585 = FILL_AREA_STYLE_COLOUR('',#517768); +#520586 = CURVE_STYLE('',#520587,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520587 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520588 = STYLED_ITEM('color',(#520589),#8040); +#520589 = PRESENTATION_STYLE_ASSIGNMENT((#520590,#520595)); +#520590 = SURFACE_STYLE_USAGE(.BOTH.,#520591); +#520591 = SURFACE_SIDE_STYLE('',(#520592)); +#520592 = SURFACE_STYLE_FILL_AREA(#520593); +#520593 = FILL_AREA_STYLE('',(#520594)); +#520594 = FILL_AREA_STYLE_COLOUR('',#517768); +#520595 = CURVE_STYLE('',#520596,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520596 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520597 = STYLED_ITEM('color',(#520598),#8052); +#520598 = PRESENTATION_STYLE_ASSIGNMENT((#520599,#520604)); +#520599 = SURFACE_STYLE_USAGE(.BOTH.,#520600); +#520600 = SURFACE_SIDE_STYLE('',(#520601)); +#520601 = SURFACE_STYLE_FILL_AREA(#520602); +#520602 = FILL_AREA_STYLE('',(#520603)); +#520603 = FILL_AREA_STYLE_COLOUR('',#517768); +#520604 = CURVE_STYLE('',#520605,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520605 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520606 = STYLED_ITEM('color',(#520607),#8069); +#520607 = PRESENTATION_STYLE_ASSIGNMENT((#520608,#520613)); +#520608 = SURFACE_STYLE_USAGE(.BOTH.,#520609); +#520609 = SURFACE_SIDE_STYLE('',(#520610)); +#520610 = SURFACE_STYLE_FILL_AREA(#520611); +#520611 = FILL_AREA_STYLE('',(#520612)); +#520612 = FILL_AREA_STYLE_COLOUR('',#517768); +#520613 = CURVE_STYLE('',#520614,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520615 = STYLED_ITEM('color',(#520616),#8086); +#520616 = PRESENTATION_STYLE_ASSIGNMENT((#520617,#520622)); +#520617 = SURFACE_STYLE_USAGE(.BOTH.,#520618); +#520618 = SURFACE_SIDE_STYLE('',(#520619)); +#520619 = SURFACE_STYLE_FILL_AREA(#520620); +#520620 = FILL_AREA_STYLE('',(#520621)); +#520621 = FILL_AREA_STYLE_COLOUR('',#517768); +#520622 = CURVE_STYLE('',#520623,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520624 = STYLED_ITEM('color',(#520625),#8098); +#520625 = PRESENTATION_STYLE_ASSIGNMENT((#520626,#520631)); +#520626 = SURFACE_STYLE_USAGE(.BOTH.,#520627); +#520627 = SURFACE_SIDE_STYLE('',(#520628)); +#520628 = SURFACE_STYLE_FILL_AREA(#520629); +#520629 = FILL_AREA_STYLE('',(#520630)); +#520630 = FILL_AREA_STYLE_COLOUR('',#517768); +#520631 = CURVE_STYLE('',#520632,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520633 = STYLED_ITEM('color',(#520634),#8115); +#520634 = PRESENTATION_STYLE_ASSIGNMENT((#520635,#520640)); +#520635 = SURFACE_STYLE_USAGE(.BOTH.,#520636); +#520636 = SURFACE_SIDE_STYLE('',(#520637)); +#520637 = SURFACE_STYLE_FILL_AREA(#520638); +#520638 = FILL_AREA_STYLE('',(#520639)); +#520639 = FILL_AREA_STYLE_COLOUR('',#517768); +#520640 = CURVE_STYLE('',#520641,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520642 = STYLED_ITEM('color',(#520643),#8132); +#520643 = PRESENTATION_STYLE_ASSIGNMENT((#520644,#520649)); +#520644 = SURFACE_STYLE_USAGE(.BOTH.,#520645); +#520645 = SURFACE_SIDE_STYLE('',(#520646)); +#520646 = SURFACE_STYLE_FILL_AREA(#520647); +#520647 = FILL_AREA_STYLE('',(#520648)); +#520648 = FILL_AREA_STYLE_COLOUR('',#517768); +#520649 = CURVE_STYLE('',#520650,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520651 = STYLED_ITEM('color',(#520652),#8144); +#520652 = PRESENTATION_STYLE_ASSIGNMENT((#520653,#520658)); +#520653 = SURFACE_STYLE_USAGE(.BOTH.,#520654); +#520654 = SURFACE_SIDE_STYLE('',(#520655)); +#520655 = SURFACE_STYLE_FILL_AREA(#520656); +#520656 = FILL_AREA_STYLE('',(#520657)); +#520657 = FILL_AREA_STYLE_COLOUR('',#517768); +#520658 = CURVE_STYLE('',#520659,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520660 = STYLED_ITEM('color',(#520661),#8161); +#520661 = PRESENTATION_STYLE_ASSIGNMENT((#520662,#520667)); +#520662 = SURFACE_STYLE_USAGE(.BOTH.,#520663); +#520663 = SURFACE_SIDE_STYLE('',(#520664)); +#520664 = SURFACE_STYLE_FILL_AREA(#520665); +#520665 = FILL_AREA_STYLE('',(#520666)); +#520666 = FILL_AREA_STYLE_COLOUR('',#517768); +#520667 = CURVE_STYLE('',#520668,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520669 = STYLED_ITEM('color',(#520670),#8178); +#520670 = PRESENTATION_STYLE_ASSIGNMENT((#520671,#520676)); +#520671 = SURFACE_STYLE_USAGE(.BOTH.,#520672); +#520672 = SURFACE_SIDE_STYLE('',(#520673)); +#520673 = SURFACE_STYLE_FILL_AREA(#520674); +#520674 = FILL_AREA_STYLE('',(#520675)); +#520675 = FILL_AREA_STYLE_COLOUR('',#517768); +#520676 = CURVE_STYLE('',#520677,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520678 = STYLED_ITEM('color',(#520679),#8190); +#520679 = PRESENTATION_STYLE_ASSIGNMENT((#520680,#520685)); +#520680 = SURFACE_STYLE_USAGE(.BOTH.,#520681); +#520681 = SURFACE_SIDE_STYLE('',(#520682)); +#520682 = SURFACE_STYLE_FILL_AREA(#520683); +#520683 = FILL_AREA_STYLE('',(#520684)); +#520684 = FILL_AREA_STYLE_COLOUR('',#517768); +#520685 = CURVE_STYLE('',#520686,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520687 = STYLED_ITEM('color',(#520688),#8207); +#520688 = PRESENTATION_STYLE_ASSIGNMENT((#520689,#520694)); +#520689 = SURFACE_STYLE_USAGE(.BOTH.,#520690); +#520690 = SURFACE_SIDE_STYLE('',(#520691)); +#520691 = SURFACE_STYLE_FILL_AREA(#520692); +#520692 = FILL_AREA_STYLE('',(#520693)); +#520693 = FILL_AREA_STYLE_COLOUR('',#517768); +#520694 = CURVE_STYLE('',#520695,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520696 = STYLED_ITEM('color',(#520697),#8224); +#520697 = PRESENTATION_STYLE_ASSIGNMENT((#520698,#520703)); +#520698 = SURFACE_STYLE_USAGE(.BOTH.,#520699); +#520699 = SURFACE_SIDE_STYLE('',(#520700)); +#520700 = SURFACE_STYLE_FILL_AREA(#520701); +#520701 = FILL_AREA_STYLE('',(#520702)); +#520702 = FILL_AREA_STYLE_COLOUR('',#517768); +#520703 = CURVE_STYLE('',#520704,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520705 = STYLED_ITEM('color',(#520706),#8236); +#520706 = PRESENTATION_STYLE_ASSIGNMENT((#520707,#520712)); +#520707 = SURFACE_STYLE_USAGE(.BOTH.,#520708); +#520708 = SURFACE_SIDE_STYLE('',(#520709)); +#520709 = SURFACE_STYLE_FILL_AREA(#520710); +#520710 = FILL_AREA_STYLE('',(#520711)); +#520711 = FILL_AREA_STYLE_COLOUR('',#517768); +#520712 = CURVE_STYLE('',#520713,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520714 = STYLED_ITEM('color',(#520715),#8253); +#520715 = PRESENTATION_STYLE_ASSIGNMENT((#520716,#520721)); +#520716 = SURFACE_STYLE_USAGE(.BOTH.,#520717); +#520717 = SURFACE_SIDE_STYLE('',(#520718)); +#520718 = SURFACE_STYLE_FILL_AREA(#520719); +#520719 = FILL_AREA_STYLE('',(#520720)); +#520720 = FILL_AREA_STYLE_COLOUR('',#517768); +#520721 = CURVE_STYLE('',#520722,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520723 = STYLED_ITEM('color',(#520724),#8270); +#520724 = PRESENTATION_STYLE_ASSIGNMENT((#520725,#520730)); +#520725 = SURFACE_STYLE_USAGE(.BOTH.,#520726); +#520726 = SURFACE_SIDE_STYLE('',(#520727)); +#520727 = SURFACE_STYLE_FILL_AREA(#520728); +#520728 = FILL_AREA_STYLE('',(#520729)); +#520729 = FILL_AREA_STYLE_COLOUR('',#517768); +#520730 = CURVE_STYLE('',#520731,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520732 = STYLED_ITEM('color',(#520733),#8282); +#520733 = PRESENTATION_STYLE_ASSIGNMENT((#520734,#520739)); +#520734 = SURFACE_STYLE_USAGE(.BOTH.,#520735); +#520735 = SURFACE_SIDE_STYLE('',(#520736)); +#520736 = SURFACE_STYLE_FILL_AREA(#520737); +#520737 = FILL_AREA_STYLE('',(#520738)); +#520738 = FILL_AREA_STYLE_COLOUR('',#517768); +#520739 = CURVE_STYLE('',#520740,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520741 = STYLED_ITEM('color',(#520742),#8299); +#520742 = PRESENTATION_STYLE_ASSIGNMENT((#520743,#520748)); +#520743 = SURFACE_STYLE_USAGE(.BOTH.,#520744); +#520744 = SURFACE_SIDE_STYLE('',(#520745)); +#520745 = SURFACE_STYLE_FILL_AREA(#520746); +#520746 = FILL_AREA_STYLE('',(#520747)); +#520747 = FILL_AREA_STYLE_COLOUR('',#517768); +#520748 = CURVE_STYLE('',#520749,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520750 = STYLED_ITEM('color',(#520751),#8316); +#520751 = PRESENTATION_STYLE_ASSIGNMENT((#520752,#520757)); +#520752 = SURFACE_STYLE_USAGE(.BOTH.,#520753); +#520753 = SURFACE_SIDE_STYLE('',(#520754)); +#520754 = SURFACE_STYLE_FILL_AREA(#520755); +#520755 = FILL_AREA_STYLE('',(#520756)); +#520756 = FILL_AREA_STYLE_COLOUR('',#517768); +#520757 = CURVE_STYLE('',#520758,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520759 = STYLED_ITEM('color',(#520760),#8328); +#520760 = PRESENTATION_STYLE_ASSIGNMENT((#520761,#520766)); +#520761 = SURFACE_STYLE_USAGE(.BOTH.,#520762); +#520762 = SURFACE_SIDE_STYLE('',(#520763)); +#520763 = SURFACE_STYLE_FILL_AREA(#520764); +#520764 = FILL_AREA_STYLE('',(#520765)); +#520765 = FILL_AREA_STYLE_COLOUR('',#517768); +#520766 = CURVE_STYLE('',#520767,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520768 = STYLED_ITEM('color',(#520769),#8345); +#520769 = PRESENTATION_STYLE_ASSIGNMENT((#520770,#520775)); +#520770 = SURFACE_STYLE_USAGE(.BOTH.,#520771); +#520771 = SURFACE_SIDE_STYLE('',(#520772)); +#520772 = SURFACE_STYLE_FILL_AREA(#520773); +#520773 = FILL_AREA_STYLE('',(#520774)); +#520774 = FILL_AREA_STYLE_COLOUR('',#517768); +#520775 = CURVE_STYLE('',#520776,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520777 = STYLED_ITEM('color',(#520778),#8362); +#520778 = PRESENTATION_STYLE_ASSIGNMENT((#520779,#520784)); +#520779 = SURFACE_STYLE_USAGE(.BOTH.,#520780); +#520780 = SURFACE_SIDE_STYLE('',(#520781)); +#520781 = SURFACE_STYLE_FILL_AREA(#520782); +#520782 = FILL_AREA_STYLE('',(#520783)); +#520783 = FILL_AREA_STYLE_COLOUR('',#517768); +#520784 = CURVE_STYLE('',#520785,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520786 = STYLED_ITEM('color',(#520787),#8374); +#520787 = PRESENTATION_STYLE_ASSIGNMENT((#520788,#520793)); +#520788 = SURFACE_STYLE_USAGE(.BOTH.,#520789); +#520789 = SURFACE_SIDE_STYLE('',(#520790)); +#520790 = SURFACE_STYLE_FILL_AREA(#520791); +#520791 = FILL_AREA_STYLE('',(#520792)); +#520792 = FILL_AREA_STYLE_COLOUR('',#517768); +#520793 = CURVE_STYLE('',#520794,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520795 = STYLED_ITEM('color',(#520796),#8391); +#520796 = PRESENTATION_STYLE_ASSIGNMENT((#520797,#520802)); +#520797 = SURFACE_STYLE_USAGE(.BOTH.,#520798); +#520798 = SURFACE_SIDE_STYLE('',(#520799)); +#520799 = SURFACE_STYLE_FILL_AREA(#520800); +#520800 = FILL_AREA_STYLE('',(#520801)); +#520801 = FILL_AREA_STYLE_COLOUR('',#517768); +#520802 = CURVE_STYLE('',#520803,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520804 = STYLED_ITEM('color',(#520805),#8408); +#520805 = PRESENTATION_STYLE_ASSIGNMENT((#520806,#520811)); +#520806 = SURFACE_STYLE_USAGE(.BOTH.,#520807); +#520807 = SURFACE_SIDE_STYLE('',(#520808)); +#520808 = SURFACE_STYLE_FILL_AREA(#520809); +#520809 = FILL_AREA_STYLE('',(#520810)); +#520810 = FILL_AREA_STYLE_COLOUR('',#517768); +#520811 = CURVE_STYLE('',#520812,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520813 = STYLED_ITEM('color',(#520814),#8420); +#520814 = PRESENTATION_STYLE_ASSIGNMENT((#520815,#520820)); +#520815 = SURFACE_STYLE_USAGE(.BOTH.,#520816); +#520816 = SURFACE_SIDE_STYLE('',(#520817)); +#520817 = SURFACE_STYLE_FILL_AREA(#520818); +#520818 = FILL_AREA_STYLE('',(#520819)); +#520819 = FILL_AREA_STYLE_COLOUR('',#517768); +#520820 = CURVE_STYLE('',#520821,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520822 = STYLED_ITEM('color',(#520823),#8437); +#520823 = PRESENTATION_STYLE_ASSIGNMENT((#520824,#520829)); +#520824 = SURFACE_STYLE_USAGE(.BOTH.,#520825); +#520825 = SURFACE_SIDE_STYLE('',(#520826)); +#520826 = SURFACE_STYLE_FILL_AREA(#520827); +#520827 = FILL_AREA_STYLE('',(#520828)); +#520828 = FILL_AREA_STYLE_COLOUR('',#517768); +#520829 = CURVE_STYLE('',#520830,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520831 = STYLED_ITEM('color',(#520832),#8454); +#520832 = PRESENTATION_STYLE_ASSIGNMENT((#520833,#520838)); +#520833 = SURFACE_STYLE_USAGE(.BOTH.,#520834); +#520834 = SURFACE_SIDE_STYLE('',(#520835)); +#520835 = SURFACE_STYLE_FILL_AREA(#520836); +#520836 = FILL_AREA_STYLE('',(#520837)); +#520837 = FILL_AREA_STYLE_COLOUR('',#517768); +#520838 = CURVE_STYLE('',#520839,POSITIVE_LENGTH_MEASURE(0.1),#517768); +#520839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#520840 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #520841,#520848,#520855,#520862,#520869,#520876,#520883,#520890, + #520897,#520904,#520911,#520919,#520926,#520933,#520940,#520947, + #520954,#520961,#520968,#520975,#520982,#520989,#520996,#521003, + #521010,#521017,#521024,#521031),#73922); +#520841 = STYLED_ITEM('color',(#520842),#73070); +#520842 = PRESENTATION_STYLE_ASSIGNMENT((#520843)); +#520843 = SURFACE_STYLE_USAGE(.BOTH.,#520844); +#520844 = SURFACE_SIDE_STYLE('',(#520845)); +#520845 = SURFACE_STYLE_FILL_AREA(#520846); +#520846 = FILL_AREA_STYLE('',(#520847)); +#520847 = FILL_AREA_STYLE_COLOUR('',#512538); +#520848 = STYLED_ITEM('color',(#520849),#73146); +#520849 = PRESENTATION_STYLE_ASSIGNMENT((#520850)); +#520850 = SURFACE_STYLE_USAGE(.BOTH.,#520851); +#520851 = SURFACE_SIDE_STYLE('',(#520852)); +#520852 = SURFACE_STYLE_FILL_AREA(#520853); +#520853 = FILL_AREA_STYLE('',(#520854)); +#520854 = FILL_AREA_STYLE_COLOUR('',#512538); +#520855 = STYLED_ITEM('color',(#520856),#73177); +#520856 = PRESENTATION_STYLE_ASSIGNMENT((#520857)); +#520857 = SURFACE_STYLE_USAGE(.BOTH.,#520858); +#520858 = SURFACE_SIDE_STYLE('',(#520859)); +#520859 = SURFACE_STYLE_FILL_AREA(#520860); +#520860 = FILL_AREA_STYLE('',(#520861)); +#520861 = FILL_AREA_STYLE_COLOUR('',#512538); +#520862 = STYLED_ITEM('color',(#520863),#73202); +#520863 = PRESENTATION_STYLE_ASSIGNMENT((#520864)); +#520864 = SURFACE_STYLE_USAGE(.BOTH.,#520865); +#520865 = SURFACE_SIDE_STYLE('',(#520866)); +#520866 = SURFACE_STYLE_FILL_AREA(#520867); +#520867 = FILL_AREA_STYLE('',(#520868)); +#520868 = FILL_AREA_STYLE_COLOUR('',#512538); +#520869 = STYLED_ITEM('color',(#520870),#73227); +#520870 = PRESENTATION_STYLE_ASSIGNMENT((#520871)); +#520871 = SURFACE_STYLE_USAGE(.BOTH.,#520872); +#520872 = SURFACE_SIDE_STYLE('',(#520873)); +#520873 = SURFACE_STYLE_FILL_AREA(#520874); +#520874 = FILL_AREA_STYLE('',(#520875)); +#520875 = FILL_AREA_STYLE_COLOUR('',#512538); +#520876 = STYLED_ITEM('color',(#520877),#73251); +#520877 = PRESENTATION_STYLE_ASSIGNMENT((#520878)); +#520878 = SURFACE_STYLE_USAGE(.BOTH.,#520879); +#520879 = SURFACE_SIDE_STYLE('',(#520880)); +#520880 = SURFACE_STYLE_FILL_AREA(#520881); +#520881 = FILL_AREA_STYLE('',(#520882)); +#520882 = FILL_AREA_STYLE_COLOUR('',#512538); +#520883 = STYLED_ITEM('color',(#520884),#73275); +#520884 = PRESENTATION_STYLE_ASSIGNMENT((#520885)); +#520885 = SURFACE_STYLE_USAGE(.BOTH.,#520886); +#520886 = SURFACE_SIDE_STYLE('',(#520887)); +#520887 = SURFACE_STYLE_FILL_AREA(#520888); +#520888 = FILL_AREA_STYLE('',(#520889)); +#520889 = FILL_AREA_STYLE_COLOUR('',#512538); +#520890 = STYLED_ITEM('color',(#520891),#73300); +#520891 = PRESENTATION_STYLE_ASSIGNMENT((#520892)); +#520892 = SURFACE_STYLE_USAGE(.BOTH.,#520893); +#520893 = SURFACE_SIDE_STYLE('',(#520894)); +#520894 = SURFACE_STYLE_FILL_AREA(#520895); +#520895 = FILL_AREA_STYLE('',(#520896)); +#520896 = FILL_AREA_STYLE_COLOUR('',#512538); +#520897 = STYLED_ITEM('color',(#520898),#73325); +#520898 = PRESENTATION_STYLE_ASSIGNMENT((#520899)); +#520899 = SURFACE_STYLE_USAGE(.BOTH.,#520900); +#520900 = SURFACE_SIDE_STYLE('',(#520901)); +#520901 = SURFACE_STYLE_FILL_AREA(#520902); +#520902 = FILL_AREA_STYLE('',(#520903)); +#520903 = FILL_AREA_STYLE_COLOUR('',#512538); +#520904 = STYLED_ITEM('color',(#520905),#73342); +#520905 = PRESENTATION_STYLE_ASSIGNMENT((#520906)); +#520906 = SURFACE_STYLE_USAGE(.BOTH.,#520907); +#520907 = SURFACE_SIDE_STYLE('',(#520908)); +#520908 = SURFACE_STYLE_FILL_AREA(#520909); +#520909 = FILL_AREA_STYLE('',(#520910)); +#520910 = FILL_AREA_STYLE_COLOUR('',#512538); +#520911 = STYLED_ITEM('color',(#520912),#73428); +#520912 = PRESENTATION_STYLE_ASSIGNMENT((#520913)); +#520913 = SURFACE_STYLE_USAGE(.BOTH.,#520914); +#520914 = SURFACE_SIDE_STYLE('',(#520915)); +#520915 = SURFACE_STYLE_FILL_AREA(#520916); +#520916 = FILL_AREA_STYLE('',(#520917)); +#520917 = FILL_AREA_STYLE_COLOUR('',#520918); +#520918 = COLOUR_RGB('',0.379000005575,0.270000008848,0.214999999939); +#520919 = STYLED_ITEM('color',(#520920),#73460); +#520920 = PRESENTATION_STYLE_ASSIGNMENT((#520921)); +#520921 = SURFACE_STYLE_USAGE(.BOTH.,#520922); +#520922 = SURFACE_SIDE_STYLE('',(#520923)); +#520923 = SURFACE_STYLE_FILL_AREA(#520924); +#520924 = FILL_AREA_STYLE('',(#520925)); +#520925 = FILL_AREA_STYLE_COLOUR('',#520918); +#520926 = STYLED_ITEM('color',(#520927),#73484); +#520927 = PRESENTATION_STYLE_ASSIGNMENT((#520928)); +#520928 = SURFACE_STYLE_USAGE(.BOTH.,#520929); +#520929 = SURFACE_SIDE_STYLE('',(#520930)); +#520930 = SURFACE_STYLE_FILL_AREA(#520931); +#520931 = FILL_AREA_STYLE('',(#520932)); +#520932 = FILL_AREA_STYLE_COLOUR('',#520918); +#520933 = STYLED_ITEM('color',(#520934),#73509); +#520934 = PRESENTATION_STYLE_ASSIGNMENT((#520935)); +#520935 = SURFACE_STYLE_USAGE(.BOTH.,#520936); +#520936 = SURFACE_SIDE_STYLE('',(#520937)); +#520937 = SURFACE_STYLE_FILL_AREA(#520938); +#520938 = FILL_AREA_STYLE('',(#520939)); +#520939 = FILL_AREA_STYLE_COLOUR('',#520918); +#520940 = STYLED_ITEM('color',(#520941),#73533); +#520941 = PRESENTATION_STYLE_ASSIGNMENT((#520942)); +#520942 = SURFACE_STYLE_USAGE(.BOTH.,#520943); +#520943 = SURFACE_SIDE_STYLE('',(#520944)); +#520944 = SURFACE_STYLE_FILL_AREA(#520945); +#520945 = FILL_AREA_STYLE('',(#520946)); +#520946 = FILL_AREA_STYLE_COLOUR('',#520918); +#520947 = STYLED_ITEM('color',(#520948),#73558); +#520948 = PRESENTATION_STYLE_ASSIGNMENT((#520949)); +#520949 = SURFACE_STYLE_USAGE(.BOTH.,#520950); +#520950 = SURFACE_SIDE_STYLE('',(#520951)); +#520951 = SURFACE_STYLE_FILL_AREA(#520952); +#520952 = FILL_AREA_STYLE('',(#520953)); +#520953 = FILL_AREA_STYLE_COLOUR('',#520918); +#520954 = STYLED_ITEM('color',(#520955),#73582); +#520955 = PRESENTATION_STYLE_ASSIGNMENT((#520956)); +#520956 = SURFACE_STYLE_USAGE(.BOTH.,#520957); +#520957 = SURFACE_SIDE_STYLE('',(#520958)); +#520958 = SURFACE_STYLE_FILL_AREA(#520959); +#520959 = FILL_AREA_STYLE('',(#520960)); +#520960 = FILL_AREA_STYLE_COLOUR('',#520918); +#520961 = STYLED_ITEM('color',(#520962),#73607); +#520962 = PRESENTATION_STYLE_ASSIGNMENT((#520963)); +#520963 = SURFACE_STYLE_USAGE(.BOTH.,#520964); +#520964 = SURFACE_SIDE_STYLE('',(#520965)); +#520965 = SURFACE_STYLE_FILL_AREA(#520966); +#520966 = FILL_AREA_STYLE('',(#520967)); +#520967 = FILL_AREA_STYLE_COLOUR('',#520918); +#520968 = STYLED_ITEM('color',(#520969),#73624); +#520969 = PRESENTATION_STYLE_ASSIGNMENT((#520970)); +#520970 = SURFACE_STYLE_USAGE(.BOTH.,#520971); +#520971 = SURFACE_SIDE_STYLE('',(#520972)); +#520972 = SURFACE_STYLE_FILL_AREA(#520973); +#520973 = FILL_AREA_STYLE('',(#520974)); +#520974 = FILL_AREA_STYLE_COLOUR('',#512538); +#520975 = STYLED_ITEM('color',(#520976),#73710); +#520976 = PRESENTATION_STYLE_ASSIGNMENT((#520977)); +#520977 = SURFACE_STYLE_USAGE(.BOTH.,#520978); +#520978 = SURFACE_SIDE_STYLE('',(#520979)); +#520979 = SURFACE_STYLE_FILL_AREA(#520980); +#520980 = FILL_AREA_STYLE('',(#520981)); +#520981 = FILL_AREA_STYLE_COLOUR('',#512538); +#520982 = STYLED_ITEM('color',(#520983),#73741); +#520983 = PRESENTATION_STYLE_ASSIGNMENT((#520984)); +#520984 = SURFACE_STYLE_USAGE(.BOTH.,#520985); +#520985 = SURFACE_SIDE_STYLE('',(#520986)); +#520986 = SURFACE_STYLE_FILL_AREA(#520987); +#520987 = FILL_AREA_STYLE('',(#520988)); +#520988 = FILL_AREA_STYLE_COLOUR('',#512538); +#520989 = STYLED_ITEM('color',(#520990),#73766); +#520990 = PRESENTATION_STYLE_ASSIGNMENT((#520991)); +#520991 = SURFACE_STYLE_USAGE(.BOTH.,#520992); +#520992 = SURFACE_SIDE_STYLE('',(#520993)); +#520993 = SURFACE_STYLE_FILL_AREA(#520994); +#520994 = FILL_AREA_STYLE('',(#520995)); +#520995 = FILL_AREA_STYLE_COLOUR('',#512538); +#520996 = STYLED_ITEM('color',(#520997),#73791); +#520997 = PRESENTATION_STYLE_ASSIGNMENT((#520998)); +#520998 = SURFACE_STYLE_USAGE(.BOTH.,#520999); +#520999 = SURFACE_SIDE_STYLE('',(#521000)); +#521000 = SURFACE_STYLE_FILL_AREA(#521001); +#521001 = FILL_AREA_STYLE('',(#521002)); +#521002 = FILL_AREA_STYLE_COLOUR('',#512538); +#521003 = STYLED_ITEM('color',(#521004),#73815); +#521004 = PRESENTATION_STYLE_ASSIGNMENT((#521005)); +#521005 = SURFACE_STYLE_USAGE(.BOTH.,#521006); +#521006 = SURFACE_SIDE_STYLE('',(#521007)); +#521007 = SURFACE_STYLE_FILL_AREA(#521008); +#521008 = FILL_AREA_STYLE('',(#521009)); +#521009 = FILL_AREA_STYLE_COLOUR('',#512538); +#521010 = STYLED_ITEM('color',(#521011),#73839); +#521011 = PRESENTATION_STYLE_ASSIGNMENT((#521012)); +#521012 = SURFACE_STYLE_USAGE(.BOTH.,#521013); +#521013 = SURFACE_SIDE_STYLE('',(#521014)); +#521014 = SURFACE_STYLE_FILL_AREA(#521015); +#521015 = FILL_AREA_STYLE('',(#521016)); +#521016 = FILL_AREA_STYLE_COLOUR('',#512538); +#521017 = STYLED_ITEM('color',(#521018),#73864); +#521018 = PRESENTATION_STYLE_ASSIGNMENT((#521019)); +#521019 = SURFACE_STYLE_USAGE(.BOTH.,#521020); +#521020 = SURFACE_SIDE_STYLE('',(#521021)); +#521021 = SURFACE_STYLE_FILL_AREA(#521022); +#521022 = FILL_AREA_STYLE('',(#521023)); +#521023 = FILL_AREA_STYLE_COLOUR('',#512538); +#521024 = STYLED_ITEM('color',(#521025),#73889); +#521025 = PRESENTATION_STYLE_ASSIGNMENT((#521026)); +#521026 = SURFACE_STYLE_USAGE(.BOTH.,#521027); +#521027 = SURFACE_SIDE_STYLE('',(#521028)); +#521028 = SURFACE_STYLE_FILL_AREA(#521029); +#521029 = FILL_AREA_STYLE('',(#521030)); +#521030 = FILL_AREA_STYLE_COLOUR('',#512538); +#521031 = STYLED_ITEM('color',(#521032),#73906); +#521032 = PRESENTATION_STYLE_ASSIGNMENT((#521033)); +#521033 = SURFACE_STYLE_USAGE(.BOTH.,#521034); +#521034 = SURFACE_SIDE_STYLE('',(#521035)); +#521035 = SURFACE_STYLE_FILL_AREA(#521036); +#521036 = FILL_AREA_STYLE('',(#521037)); +#521037 = FILL_AREA_STYLE_COLOUR('',#512538); +#521038 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #521039,#521046,#521054,#521061,#521068,#521075,#521082,#521089, + #521096,#521103,#521110,#521117,#521124,#521131,#521138,#521145, + #521152),#175533); +#521039 = STYLED_ITEM('color',(#521040),#170029); +#521040 = PRESENTATION_STYLE_ASSIGNMENT((#521041)); +#521041 = SURFACE_STYLE_USAGE(.BOTH.,#521042); +#521042 = SURFACE_SIDE_STYLE('',(#521043)); +#521043 = SURFACE_STYLE_FILL_AREA(#521044); +#521044 = FILL_AREA_STYLE('',(#521045)); +#521045 = FILL_AREA_STYLE_COLOUR('',#506663); +#521046 = STYLED_ITEM('color',(#521047),#170117); +#521047 = PRESENTATION_STYLE_ASSIGNMENT((#521048)); +#521048 = SURFACE_STYLE_USAGE(.BOTH.,#521049); +#521049 = SURFACE_SIDE_STYLE('',(#521050)); +#521050 = SURFACE_STYLE_FILL_AREA(#521051); +#521051 = FILL_AREA_STYLE('',(#521052)); +#521052 = FILL_AREA_STYLE_COLOUR('',#521053); +#521053 = COLOUR_RGB('',0.792156867455,0.819607826924,0.933333342953); +#521054 = STYLED_ITEM('color',(#521055),#170267); +#521055 = PRESENTATION_STYLE_ASSIGNMENT((#521056)); +#521056 = SURFACE_STYLE_USAGE(.BOTH.,#521057); +#521057 = SURFACE_SIDE_STYLE('',(#521058)); +#521058 = SURFACE_STYLE_FILL_AREA(#521059); +#521059 = FILL_AREA_STYLE('',(#521060)); +#521060 = FILL_AREA_STYLE_COLOUR('',#521053); +#521061 = STYLED_ITEM('color',(#521062),#170450); +#521062 = PRESENTATION_STYLE_ASSIGNMENT((#521063)); +#521063 = SURFACE_STYLE_USAGE(.BOTH.,#521064); +#521064 = SURFACE_SIDE_STYLE('',(#521065)); +#521065 = SURFACE_STYLE_FILL_AREA(#521066); +#521066 = FILL_AREA_STYLE('',(#521067)); +#521067 = FILL_AREA_STYLE_COLOUR('',#521053); +#521068 = STYLED_ITEM('color',(#521069),#170600); +#521069 = PRESENTATION_STYLE_ASSIGNMENT((#521070)); +#521070 = SURFACE_STYLE_USAGE(.BOTH.,#521071); +#521071 = SURFACE_SIDE_STYLE('',(#521072)); +#521072 = SURFACE_STYLE_FILL_AREA(#521073); +#521073 = FILL_AREA_STYLE('',(#521074)); +#521074 = FILL_AREA_STYLE_COLOUR('',#521053); +#521075 = STYLED_ITEM('color',(#521076),#170750); +#521076 = PRESENTATION_STYLE_ASSIGNMENT((#521077)); +#521077 = SURFACE_STYLE_USAGE(.BOTH.,#521078); +#521078 = SURFACE_SIDE_STYLE('',(#521079)); +#521079 = SURFACE_STYLE_FILL_AREA(#521080); +#521080 = FILL_AREA_STYLE('',(#521081)); +#521081 = FILL_AREA_STYLE_COLOUR('',#521053); +#521082 = STYLED_ITEM('color',(#521083),#170900); +#521083 = PRESENTATION_STYLE_ASSIGNMENT((#521084)); +#521084 = SURFACE_STYLE_USAGE(.BOTH.,#521085); +#521085 = SURFACE_SIDE_STYLE('',(#521086)); +#521086 = SURFACE_STYLE_FILL_AREA(#521087); +#521087 = FILL_AREA_STYLE('',(#521088)); +#521088 = FILL_AREA_STYLE_COLOUR('',#521053); +#521089 = STYLED_ITEM('color',(#521090),#171050); +#521090 = PRESENTATION_STYLE_ASSIGNMENT((#521091)); +#521091 = SURFACE_STYLE_USAGE(.BOTH.,#521092); +#521092 = SURFACE_SIDE_STYLE('',(#521093)); +#521093 = SURFACE_STYLE_FILL_AREA(#521094); +#521094 = FILL_AREA_STYLE('',(#521095)); +#521095 = FILL_AREA_STYLE_COLOUR('',#521053); +#521096 = STYLED_ITEM('color',(#521097),#171200); +#521097 = PRESENTATION_STYLE_ASSIGNMENT((#521098)); +#521098 = SURFACE_STYLE_USAGE(.BOTH.,#521099); +#521099 = SURFACE_SIDE_STYLE('',(#521100)); +#521100 = SURFACE_STYLE_FILL_AREA(#521101); +#521101 = FILL_AREA_STYLE('',(#521102)); +#521102 = FILL_AREA_STYLE_COLOUR('',#521053); +#521103 = STYLED_ITEM('color',(#521104),#171350); +#521104 = PRESENTATION_STYLE_ASSIGNMENT((#521105)); +#521105 = SURFACE_STYLE_USAGE(.BOTH.,#521106); +#521106 = SURFACE_SIDE_STYLE('',(#521107)); +#521107 = SURFACE_STYLE_FILL_AREA(#521108); +#521108 = FILL_AREA_STYLE('',(#521109)); +#521109 = FILL_AREA_STYLE_COLOUR('',#521053); +#521110 = STYLED_ITEM('color',(#521111),#171500); +#521111 = PRESENTATION_STYLE_ASSIGNMENT((#521112)); +#521112 = SURFACE_STYLE_USAGE(.BOTH.,#521113); +#521113 = SURFACE_SIDE_STYLE('',(#521114)); +#521114 = SURFACE_STYLE_FILL_AREA(#521115); +#521115 = FILL_AREA_STYLE('',(#521116)); +#521116 = FILL_AREA_STYLE_COLOUR('',#521053); +#521117 = STYLED_ITEM('color',(#521118),#171650); +#521118 = PRESENTATION_STYLE_ASSIGNMENT((#521119)); +#521119 = SURFACE_STYLE_USAGE(.BOTH.,#521120); +#521120 = SURFACE_SIDE_STYLE('',(#521121)); +#521121 = SURFACE_STYLE_FILL_AREA(#521122); +#521122 = FILL_AREA_STYLE('',(#521123)); +#521123 = FILL_AREA_STYLE_COLOUR('',#521053); +#521124 = STYLED_ITEM('color',(#521125),#171800); +#521125 = PRESENTATION_STYLE_ASSIGNMENT((#521126)); +#521126 = SURFACE_STYLE_USAGE(.BOTH.,#521127); +#521127 = SURFACE_SIDE_STYLE('',(#521128)); +#521128 = SURFACE_STYLE_FILL_AREA(#521129); +#521129 = FILL_AREA_STYLE('',(#521130)); +#521130 = FILL_AREA_STYLE_COLOUR('',#506671); +#521131 = STYLED_ITEM('color',(#521132),#174933); +#521132 = PRESENTATION_STYLE_ASSIGNMENT((#521133)); +#521133 = SURFACE_STYLE_USAGE(.BOTH.,#521134); +#521134 = SURFACE_SIDE_STYLE('',(#521135)); +#521135 = SURFACE_STYLE_FILL_AREA(#521136); +#521136 = FILL_AREA_STYLE('',(#521137)); +#521137 = FILL_AREA_STYLE_COLOUR('',#521053); +#521138 = STYLED_ITEM('color',(#521139),#175083); +#521139 = PRESENTATION_STYLE_ASSIGNMENT((#521140)); +#521140 = SURFACE_STYLE_USAGE(.BOTH.,#521141); +#521141 = SURFACE_SIDE_STYLE('',(#521142)); +#521142 = SURFACE_STYLE_FILL_AREA(#521143); +#521143 = FILL_AREA_STYLE('',(#521144)); +#521144 = FILL_AREA_STYLE_COLOUR('',#521053); +#521145 = STYLED_ITEM('color',(#521146),#175233); +#521146 = PRESENTATION_STYLE_ASSIGNMENT((#521147)); +#521147 = SURFACE_STYLE_USAGE(.BOTH.,#521148); +#521148 = SURFACE_SIDE_STYLE('',(#521149)); +#521149 = SURFACE_STYLE_FILL_AREA(#521150); +#521150 = FILL_AREA_STYLE('',(#521151)); +#521151 = FILL_AREA_STYLE_COLOUR('',#521053); +#521152 = STYLED_ITEM('color',(#521153),#175383); +#521153 = PRESENTATION_STYLE_ASSIGNMENT((#521154)); +#521154 = SURFACE_STYLE_USAGE(.BOTH.,#521155); +#521155 = SURFACE_SIDE_STYLE('',(#521156)); +#521156 = SURFACE_STYLE_FILL_AREA(#521157); +#521157 = FILL_AREA_STYLE('',(#521158)); +#521158 = FILL_AREA_STYLE_COLOUR('',#521053); +#521159 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #521160,#521169,#521178,#521187,#521196,#521205,#521214,#521223, + #521232,#521241,#521250,#521259,#521268,#521277,#521286,#521295, + #521304,#521313,#521322,#521331,#521340,#521349,#521358,#521367, + #521376,#521385,#521394,#521403,#521412,#521421,#521430,#521439, + #521448,#521457,#521466,#521475,#521484,#521493,#521502,#521511, + #521520,#521529,#521538,#521547,#521556,#521565,#521574,#521583, + #521592,#521601,#521610,#521619,#521628,#521637,#521646,#521655, + #521664,#521673,#521682,#521691,#521700,#521709,#521718,#521727, + #521736,#521745,#521754,#521763,#521772,#521781,#521790,#521799, + #521808,#521817,#521826,#521835,#521844,#521853,#521862,#521871, + #521880,#521889,#521898,#521907,#521916,#521925,#521934,#521943, + #521952,#521961,#521970,#521979,#521988,#521997,#522006,#522015, + #522024,#522033,#522042,#522051,#522060,#522069),#178689); +#521160 = STYLED_ITEM('color',(#521161),#175622); +#521161 = PRESENTATION_STYLE_ASSIGNMENT((#521162,#521167)); +#521162 = SURFACE_STYLE_USAGE(.BOTH.,#521163); +#521163 = SURFACE_SIDE_STYLE('',(#521164)); +#521164 = SURFACE_STYLE_FILL_AREA(#521165); +#521165 = FILL_AREA_STYLE('',(#521166)); +#521166 = FILL_AREA_STYLE_COLOUR('',#512501); +#521167 = CURVE_STYLE('',#521168,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521168 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521169 = STYLED_ITEM('color',(#521170),#175660); +#521170 = PRESENTATION_STYLE_ASSIGNMENT((#521171,#521176)); +#521171 = SURFACE_STYLE_USAGE(.BOTH.,#521172); +#521172 = SURFACE_SIDE_STYLE('',(#521173)); +#521173 = SURFACE_STYLE_FILL_AREA(#521174); +#521174 = FILL_AREA_STYLE('',(#521175)); +#521175 = FILL_AREA_STYLE_COLOUR('',#512501); +#521176 = CURVE_STYLE('',#521177,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521177 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521178 = STYLED_ITEM('color',(#521179),#175723); +#521179 = PRESENTATION_STYLE_ASSIGNMENT((#521180,#521185)); +#521180 = SURFACE_STYLE_USAGE(.BOTH.,#521181); +#521181 = SURFACE_SIDE_STYLE('',(#521182)); +#521182 = SURFACE_STYLE_FILL_AREA(#521183); +#521183 = FILL_AREA_STYLE('',(#521184)); +#521184 = FILL_AREA_STYLE_COLOUR('',#512501); +#521185 = CURVE_STYLE('',#521186,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521186 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521187 = STYLED_ITEM('color',(#521188),#175746); +#521188 = PRESENTATION_STYLE_ASSIGNMENT((#521189,#521194)); +#521189 = SURFACE_STYLE_USAGE(.BOTH.,#521190); +#521190 = SURFACE_SIDE_STYLE('',(#521191)); +#521191 = SURFACE_STYLE_FILL_AREA(#521192); +#521192 = FILL_AREA_STYLE('',(#521193)); +#521193 = FILL_AREA_STYLE_COLOUR('',#512501); +#521194 = CURVE_STYLE('',#521195,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521195 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521196 = STYLED_ITEM('color',(#521197),#175775); +#521197 = PRESENTATION_STYLE_ASSIGNMENT((#521198,#521203)); +#521198 = SURFACE_STYLE_USAGE(.BOTH.,#521199); +#521199 = SURFACE_SIDE_STYLE('',(#521200)); +#521200 = SURFACE_STYLE_FILL_AREA(#521201); +#521201 = FILL_AREA_STYLE('',(#521202)); +#521202 = FILL_AREA_STYLE_COLOUR('',#512501); +#521203 = CURVE_STYLE('',#521204,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521204 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521205 = STYLED_ITEM('color',(#521206),#175798); +#521206 = PRESENTATION_STYLE_ASSIGNMENT((#521207,#521212)); +#521207 = SURFACE_STYLE_USAGE(.BOTH.,#521208); +#521208 = SURFACE_SIDE_STYLE('',(#521209)); +#521209 = SURFACE_STYLE_FILL_AREA(#521210); +#521210 = FILL_AREA_STYLE('',(#521211)); +#521211 = FILL_AREA_STYLE_COLOUR('',#512501); +#521212 = CURVE_STYLE('',#521213,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521213 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521214 = STYLED_ITEM('color',(#521215),#175869); +#521215 = PRESENTATION_STYLE_ASSIGNMENT((#521216,#521221)); +#521216 = SURFACE_STYLE_USAGE(.BOTH.,#521217); +#521217 = SURFACE_SIDE_STYLE('',(#521218)); +#521218 = SURFACE_STYLE_FILL_AREA(#521219); +#521219 = FILL_AREA_STYLE('',(#521220)); +#521220 = FILL_AREA_STYLE_COLOUR('',#512501); +#521221 = CURVE_STYLE('',#521222,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521222 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521223 = STYLED_ITEM('color',(#521224),#175924); +#521224 = PRESENTATION_STYLE_ASSIGNMENT((#521225,#521230)); +#521225 = SURFACE_STYLE_USAGE(.BOTH.,#521226); +#521226 = SURFACE_SIDE_STYLE('',(#521227)); +#521227 = SURFACE_STYLE_FILL_AREA(#521228); +#521228 = FILL_AREA_STYLE('',(#521229)); +#521229 = FILL_AREA_STYLE_COLOUR('',#512501); +#521230 = CURVE_STYLE('',#521231,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521231 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521232 = STYLED_ITEM('color',(#521233),#175947); +#521233 = PRESENTATION_STYLE_ASSIGNMENT((#521234,#521239)); +#521234 = SURFACE_STYLE_USAGE(.BOTH.,#521235); +#521235 = SURFACE_SIDE_STYLE('',(#521236)); +#521236 = SURFACE_STYLE_FILL_AREA(#521237); +#521237 = FILL_AREA_STYLE('',(#521238)); +#521238 = FILL_AREA_STYLE_COLOUR('',#512501); +#521239 = CURVE_STYLE('',#521240,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521240 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521241 = STYLED_ITEM('color',(#521242),#175970); +#521242 = PRESENTATION_STYLE_ASSIGNMENT((#521243,#521248)); +#521243 = SURFACE_STYLE_USAGE(.BOTH.,#521244); +#521244 = SURFACE_SIDE_STYLE('',(#521245)); +#521245 = SURFACE_STYLE_FILL_AREA(#521246); +#521246 = FILL_AREA_STYLE('',(#521247)); +#521247 = FILL_AREA_STYLE_COLOUR('',#512501); +#521248 = CURVE_STYLE('',#521249,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521249 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521250 = STYLED_ITEM('color',(#521251),#175987); +#521251 = PRESENTATION_STYLE_ASSIGNMENT((#521252,#521257)); +#521252 = SURFACE_STYLE_USAGE(.BOTH.,#521253); +#521253 = SURFACE_SIDE_STYLE('',(#521254)); +#521254 = SURFACE_STYLE_FILL_AREA(#521255); +#521255 = FILL_AREA_STYLE('',(#521256)); +#521256 = FILL_AREA_STYLE_COLOUR('',#512501); +#521257 = CURVE_STYLE('',#521258,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521258 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521259 = STYLED_ITEM('color',(#521260),#176010); +#521260 = PRESENTATION_STYLE_ASSIGNMENT((#521261,#521266)); +#521261 = SURFACE_STYLE_USAGE(.BOTH.,#521262); +#521262 = SURFACE_SIDE_STYLE('',(#521263)); +#521263 = SURFACE_STYLE_FILL_AREA(#521264); +#521264 = FILL_AREA_STYLE('',(#521265)); +#521265 = FILL_AREA_STYLE_COLOUR('',#512501); +#521266 = CURVE_STYLE('',#521267,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521267 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521268 = STYLED_ITEM('color',(#521269),#176098); +#521269 = PRESENTATION_STYLE_ASSIGNMENT((#521270,#521275)); +#521270 = SURFACE_STYLE_USAGE(.BOTH.,#521271); +#521271 = SURFACE_SIDE_STYLE('',(#521272)); +#521272 = SURFACE_STYLE_FILL_AREA(#521273); +#521273 = FILL_AREA_STYLE('',(#521274)); +#521274 = FILL_AREA_STYLE_COLOUR('',#512501); +#521275 = CURVE_STYLE('',#521276,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521276 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521277 = STYLED_ITEM('color',(#521278),#176114); +#521278 = PRESENTATION_STYLE_ASSIGNMENT((#521279,#521284)); +#521279 = SURFACE_STYLE_USAGE(.BOTH.,#521280); +#521280 = SURFACE_SIDE_STYLE('',(#521281)); +#521281 = SURFACE_STYLE_FILL_AREA(#521282); +#521282 = FILL_AREA_STYLE('',(#521283)); +#521283 = FILL_AREA_STYLE_COLOUR('',#512501); +#521284 = CURVE_STYLE('',#521285,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521285 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521286 = STYLED_ITEM('color',(#521287),#176144); +#521287 = PRESENTATION_STYLE_ASSIGNMENT((#521288,#521293)); +#521288 = SURFACE_STYLE_USAGE(.BOTH.,#521289); +#521289 = SURFACE_SIDE_STYLE('',(#521290)); +#521290 = SURFACE_STYLE_FILL_AREA(#521291); +#521291 = FILL_AREA_STYLE('',(#521292)); +#521292 = FILL_AREA_STYLE_COLOUR('',#512538); +#521293 = CURVE_STYLE('',#521294,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521294 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521295 = STYLED_ITEM('color',(#521296),#176175); +#521296 = PRESENTATION_STYLE_ASSIGNMENT((#521297,#521302)); +#521297 = SURFACE_STYLE_USAGE(.BOTH.,#521298); +#521298 = SURFACE_SIDE_STYLE('',(#521299)); +#521299 = SURFACE_STYLE_FILL_AREA(#521300); +#521300 = FILL_AREA_STYLE('',(#521301)); +#521301 = FILL_AREA_STYLE_COLOUR('',#512501); +#521302 = CURVE_STYLE('',#521303,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521303 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521304 = STYLED_ITEM('color',(#521305),#176206); +#521305 = PRESENTATION_STYLE_ASSIGNMENT((#521306,#521311)); +#521306 = SURFACE_STYLE_USAGE(.BOTH.,#521307); +#521307 = SURFACE_SIDE_STYLE('',(#521308)); +#521308 = SURFACE_STYLE_FILL_AREA(#521309); +#521309 = FILL_AREA_STYLE('',(#521310)); +#521310 = FILL_AREA_STYLE_COLOUR('',#512538); +#521311 = CURVE_STYLE('',#521312,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521312 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521313 = STYLED_ITEM('color',(#521314),#176237); +#521314 = PRESENTATION_STYLE_ASSIGNMENT((#521315,#521320)); +#521315 = SURFACE_STYLE_USAGE(.BOTH.,#521316); +#521316 = SURFACE_SIDE_STYLE('',(#521317)); +#521317 = SURFACE_STYLE_FILL_AREA(#521318); +#521318 = FILL_AREA_STYLE('',(#521319)); +#521319 = FILL_AREA_STYLE_COLOUR('',#512501); +#521320 = CURVE_STYLE('',#521321,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521321 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521322 = STYLED_ITEM('color',(#521323),#176268); +#521323 = PRESENTATION_STYLE_ASSIGNMENT((#521324,#521329)); +#521324 = SURFACE_STYLE_USAGE(.BOTH.,#521325); +#521325 = SURFACE_SIDE_STYLE('',(#521326)); +#521326 = SURFACE_STYLE_FILL_AREA(#521327); +#521327 = FILL_AREA_STYLE('',(#521328)); +#521328 = FILL_AREA_STYLE_COLOUR('',#512538); +#521329 = CURVE_STYLE('',#521330,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521330 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521331 = STYLED_ITEM('color',(#521332),#176299); +#521332 = PRESENTATION_STYLE_ASSIGNMENT((#521333,#521338)); +#521333 = SURFACE_STYLE_USAGE(.BOTH.,#521334); +#521334 = SURFACE_SIDE_STYLE('',(#521335)); +#521335 = SURFACE_STYLE_FILL_AREA(#521336); +#521336 = FILL_AREA_STYLE('',(#521337)); +#521337 = FILL_AREA_STYLE_COLOUR('',#512501); +#521338 = CURVE_STYLE('',#521339,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521339 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521340 = STYLED_ITEM('color',(#521341),#176316); +#521341 = PRESENTATION_STYLE_ASSIGNMENT((#521342,#521347)); +#521342 = SURFACE_STYLE_USAGE(.BOTH.,#521343); +#521343 = SURFACE_SIDE_STYLE('',(#521344)); +#521344 = SURFACE_STYLE_FILL_AREA(#521345); +#521345 = FILL_AREA_STYLE('',(#521346)); +#521346 = FILL_AREA_STYLE_COLOUR('',#512501); +#521347 = CURVE_STYLE('',#521348,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521348 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521349 = STYLED_ITEM('color',(#521350),#176333); +#521350 = PRESENTATION_STYLE_ASSIGNMENT((#521351,#521356)); +#521351 = SURFACE_STYLE_USAGE(.BOTH.,#521352); +#521352 = SURFACE_SIDE_STYLE('',(#521353)); +#521353 = SURFACE_STYLE_FILL_AREA(#521354); +#521354 = FILL_AREA_STYLE('',(#521355)); +#521355 = FILL_AREA_STYLE_COLOUR('',#512538); +#521356 = CURVE_STYLE('',#521357,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521357 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521358 = STYLED_ITEM('color',(#521359),#176364); +#521359 = PRESENTATION_STYLE_ASSIGNMENT((#521360,#521365)); +#521360 = SURFACE_STYLE_USAGE(.BOTH.,#521361); +#521361 = SURFACE_SIDE_STYLE('',(#521362)); +#521362 = SURFACE_STYLE_FILL_AREA(#521363); +#521363 = FILL_AREA_STYLE('',(#521364)); +#521364 = FILL_AREA_STYLE_COLOUR('',#512501); +#521365 = CURVE_STYLE('',#521366,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521366 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521367 = STYLED_ITEM('color',(#521368),#176395); +#521368 = PRESENTATION_STYLE_ASSIGNMENT((#521369,#521374)); +#521369 = SURFACE_STYLE_USAGE(.BOTH.,#521370); +#521370 = SURFACE_SIDE_STYLE('',(#521371)); +#521371 = SURFACE_STYLE_FILL_AREA(#521372); +#521372 = FILL_AREA_STYLE('',(#521373)); +#521373 = FILL_AREA_STYLE_COLOUR('',#512538); +#521374 = CURVE_STYLE('',#521375,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521376 = STYLED_ITEM('color',(#521377),#176426); +#521377 = PRESENTATION_STYLE_ASSIGNMENT((#521378,#521383)); +#521378 = SURFACE_STYLE_USAGE(.BOTH.,#521379); +#521379 = SURFACE_SIDE_STYLE('',(#521380)); +#521380 = SURFACE_STYLE_FILL_AREA(#521381); +#521381 = FILL_AREA_STYLE('',(#521382)); +#521382 = FILL_AREA_STYLE_COLOUR('',#512501); +#521383 = CURVE_STYLE('',#521384,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521384 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521385 = STYLED_ITEM('color',(#521386),#176456); +#521386 = PRESENTATION_STYLE_ASSIGNMENT((#521387,#521392)); +#521387 = SURFACE_STYLE_USAGE(.BOTH.,#521388); +#521388 = SURFACE_SIDE_STYLE('',(#521389)); +#521389 = SURFACE_STYLE_FILL_AREA(#521390); +#521390 = FILL_AREA_STYLE('',(#521391)); +#521391 = FILL_AREA_STYLE_COLOUR('',#512501); +#521392 = CURVE_STYLE('',#521393,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521393 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521394 = STYLED_ITEM('color',(#521395),#176479); +#521395 = PRESENTATION_STYLE_ASSIGNMENT((#521396,#521401)); +#521396 = SURFACE_STYLE_USAGE(.BOTH.,#521397); +#521397 = SURFACE_SIDE_STYLE('',(#521398)); +#521398 = SURFACE_STYLE_FILL_AREA(#521399); +#521399 = FILL_AREA_STYLE('',(#521400)); +#521400 = FILL_AREA_STYLE_COLOUR('',#512501); +#521401 = CURVE_STYLE('',#521402,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521402 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521403 = STYLED_ITEM('color',(#521404),#176502); +#521404 = PRESENTATION_STYLE_ASSIGNMENT((#521405,#521410)); +#521405 = SURFACE_STYLE_USAGE(.BOTH.,#521406); +#521406 = SURFACE_SIDE_STYLE('',(#521407)); +#521407 = SURFACE_STYLE_FILL_AREA(#521408); +#521408 = FILL_AREA_STYLE('',(#521409)); +#521409 = FILL_AREA_STYLE_COLOUR('',#512501); +#521410 = CURVE_STYLE('',#521411,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521411 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521412 = STYLED_ITEM('color',(#521413),#176519); +#521413 = PRESENTATION_STYLE_ASSIGNMENT((#521414,#521419)); +#521414 = SURFACE_STYLE_USAGE(.BOTH.,#521415); +#521415 = SURFACE_SIDE_STYLE('',(#521416)); +#521416 = SURFACE_STYLE_FILL_AREA(#521417); +#521417 = FILL_AREA_STYLE('',(#521418)); +#521418 = FILL_AREA_STYLE_COLOUR('',#512538); +#521419 = CURVE_STYLE('',#521420,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521420 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521421 = STYLED_ITEM('color',(#521422),#176564); +#521422 = PRESENTATION_STYLE_ASSIGNMENT((#521423,#521428)); +#521423 = SURFACE_STYLE_USAGE(.BOTH.,#521424); +#521424 = SURFACE_SIDE_STYLE('',(#521425)); +#521425 = SURFACE_STYLE_FILL_AREA(#521426); +#521426 = FILL_AREA_STYLE('',(#521427)); +#521427 = FILL_AREA_STYLE_COLOUR('',#512501); +#521428 = CURVE_STYLE('',#521429,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521429 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521430 = STYLED_ITEM('color',(#521431),#176634); +#521431 = PRESENTATION_STYLE_ASSIGNMENT((#521432,#521437)); +#521432 = SURFACE_STYLE_USAGE(.BOTH.,#521433); +#521433 = SURFACE_SIDE_STYLE('',(#521434)); +#521434 = SURFACE_STYLE_FILL_AREA(#521435); +#521435 = FILL_AREA_STYLE('',(#521436)); +#521436 = FILL_AREA_STYLE_COLOUR('',#512501); +#521437 = CURVE_STYLE('',#521438,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521438 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521439 = STYLED_ITEM('color',(#521440),#176657); +#521440 = PRESENTATION_STYLE_ASSIGNMENT((#521441,#521446)); +#521441 = SURFACE_STYLE_USAGE(.BOTH.,#521442); +#521442 = SURFACE_SIDE_STYLE('',(#521443)); +#521443 = SURFACE_STYLE_FILL_AREA(#521444); +#521444 = FILL_AREA_STYLE('',(#521445)); +#521445 = FILL_AREA_STYLE_COLOUR('',#512501); +#521446 = CURVE_STYLE('',#521447,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521447 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521448 = STYLED_ITEM('color',(#521449),#176680); +#521449 = PRESENTATION_STYLE_ASSIGNMENT((#521450,#521455)); +#521450 = SURFACE_STYLE_USAGE(.BOTH.,#521451); +#521451 = SURFACE_SIDE_STYLE('',(#521452)); +#521452 = SURFACE_STYLE_FILL_AREA(#521453); +#521453 = FILL_AREA_STYLE('',(#521454)); +#521454 = FILL_AREA_STYLE_COLOUR('',#512501); +#521455 = CURVE_STYLE('',#521456,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521456 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521457 = STYLED_ITEM('color',(#521458),#176703); +#521458 = PRESENTATION_STYLE_ASSIGNMENT((#521459,#521464)); +#521459 = SURFACE_STYLE_USAGE(.BOTH.,#521460); +#521460 = SURFACE_SIDE_STYLE('',(#521461)); +#521461 = SURFACE_STYLE_FILL_AREA(#521462); +#521462 = FILL_AREA_STYLE('',(#521463)); +#521463 = FILL_AREA_STYLE_COLOUR('',#512501); +#521464 = CURVE_STYLE('',#521465,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521465 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521466 = STYLED_ITEM('color',(#521467),#176758); +#521467 = PRESENTATION_STYLE_ASSIGNMENT((#521468,#521473)); +#521468 = SURFACE_STYLE_USAGE(.BOTH.,#521469); +#521469 = SURFACE_SIDE_STYLE('',(#521470)); +#521470 = SURFACE_STYLE_FILL_AREA(#521471); +#521471 = FILL_AREA_STYLE('',(#521472)); +#521472 = FILL_AREA_STYLE_COLOUR('',#512538); +#521473 = CURVE_STYLE('',#521474,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521474 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521475 = STYLED_ITEM('color',(#521476),#176796); +#521476 = PRESENTATION_STYLE_ASSIGNMENT((#521477,#521482)); +#521477 = SURFACE_STYLE_USAGE(.BOTH.,#521478); +#521478 = SURFACE_SIDE_STYLE('',(#521479)); +#521479 = SURFACE_STYLE_FILL_AREA(#521480); +#521480 = FILL_AREA_STYLE('',(#521481)); +#521481 = FILL_AREA_STYLE_COLOUR('',#512501); +#521482 = CURVE_STYLE('',#521483,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521483 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521484 = STYLED_ITEM('color',(#521485),#176845); +#521485 = PRESENTATION_STYLE_ASSIGNMENT((#521486,#521491)); +#521486 = SURFACE_STYLE_USAGE(.BOTH.,#521487); +#521487 = SURFACE_SIDE_STYLE('',(#521488)); +#521488 = SURFACE_STYLE_FILL_AREA(#521489); +#521489 = FILL_AREA_STYLE('',(#521490)); +#521490 = FILL_AREA_STYLE_COLOUR('',#512538); +#521491 = CURVE_STYLE('',#521492,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521492 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521493 = STYLED_ITEM('color',(#521494),#176937); +#521494 = PRESENTATION_STYLE_ASSIGNMENT((#521495,#521500)); +#521495 = SURFACE_STYLE_USAGE(.BOTH.,#521496); +#521496 = SURFACE_SIDE_STYLE('',(#521497)); +#521497 = SURFACE_STYLE_FILL_AREA(#521498); +#521498 = FILL_AREA_STYLE('',(#521499)); +#521499 = FILL_AREA_STYLE_COLOUR('',#512538); +#521500 = CURVE_STYLE('',#521501,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521501 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521502 = STYLED_ITEM('color',(#521503),#176962); +#521503 = PRESENTATION_STYLE_ASSIGNMENT((#521504,#521509)); +#521504 = SURFACE_STYLE_USAGE(.BOTH.,#521505); +#521505 = SURFACE_SIDE_STYLE('',(#521506)); +#521506 = SURFACE_STYLE_FILL_AREA(#521507); +#521507 = FILL_AREA_STYLE('',(#521508)); +#521508 = FILL_AREA_STYLE_COLOUR('',#512538); +#521509 = CURVE_STYLE('',#521510,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521510 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521511 = STYLED_ITEM('color',(#521512),#177046); +#521512 = PRESENTATION_STYLE_ASSIGNMENT((#521513,#521518)); +#521513 = SURFACE_STYLE_USAGE(.BOTH.,#521514); +#521514 = SURFACE_SIDE_STYLE('',(#521515)); +#521515 = SURFACE_STYLE_FILL_AREA(#521516); +#521516 = FILL_AREA_STYLE('',(#521517)); +#521517 = FILL_AREA_STYLE_COLOUR('',#512501); +#521518 = CURVE_STYLE('',#521519,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521519 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521520 = STYLED_ITEM('color',(#521521),#177068); +#521521 = PRESENTATION_STYLE_ASSIGNMENT((#521522,#521527)); +#521522 = SURFACE_STYLE_USAGE(.BOTH.,#521523); +#521523 = SURFACE_SIDE_STYLE('',(#521524)); +#521524 = SURFACE_STYLE_FILL_AREA(#521525); +#521525 = FILL_AREA_STYLE('',(#521526)); +#521526 = FILL_AREA_STYLE_COLOUR('',#512538); +#521527 = CURVE_STYLE('',#521528,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521528 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521529 = STYLED_ITEM('color',(#521530),#177160); +#521530 = PRESENTATION_STYLE_ASSIGNMENT((#521531,#521536)); +#521531 = SURFACE_STYLE_USAGE(.BOTH.,#521532); +#521532 = SURFACE_SIDE_STYLE('',(#521533)); +#521533 = SURFACE_STYLE_FILL_AREA(#521534); +#521534 = FILL_AREA_STYLE('',(#521535)); +#521535 = FILL_AREA_STYLE_COLOUR('',#512538); +#521536 = CURVE_STYLE('',#521537,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521537 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521538 = STYLED_ITEM('color',(#521539),#177185); +#521539 = PRESENTATION_STYLE_ASSIGNMENT((#521540,#521545)); +#521540 = SURFACE_STYLE_USAGE(.BOTH.,#521541); +#521541 = SURFACE_SIDE_STYLE('',(#521542)); +#521542 = SURFACE_STYLE_FILL_AREA(#521543); +#521543 = FILL_AREA_STYLE('',(#521544)); +#521544 = FILL_AREA_STYLE_COLOUR('',#512538); +#521545 = CURVE_STYLE('',#521546,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521546 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521547 = STYLED_ITEM('color',(#521548),#177269); +#521548 = PRESENTATION_STYLE_ASSIGNMENT((#521549,#521554)); +#521549 = SURFACE_STYLE_USAGE(.BOTH.,#521550); +#521550 = SURFACE_SIDE_STYLE('',(#521551)); +#521551 = SURFACE_STYLE_FILL_AREA(#521552); +#521552 = FILL_AREA_STYLE('',(#521553)); +#521553 = FILL_AREA_STYLE_COLOUR('',#512501); +#521554 = CURVE_STYLE('',#521555,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521555 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521556 = STYLED_ITEM('color',(#521557),#177286); +#521557 = PRESENTATION_STYLE_ASSIGNMENT((#521558,#521563)); +#521558 = SURFACE_STYLE_USAGE(.BOTH.,#521559); +#521559 = SURFACE_SIDE_STYLE('',(#521560)); +#521560 = SURFACE_STYLE_FILL_AREA(#521561); +#521561 = FILL_AREA_STYLE('',(#521562)); +#521562 = FILL_AREA_STYLE_COLOUR('',#512538); +#521563 = CURVE_STYLE('',#521564,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521564 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521565 = STYLED_ITEM('color',(#521566),#177371); +#521566 = PRESENTATION_STYLE_ASSIGNMENT((#521567,#521572)); +#521567 = SURFACE_STYLE_USAGE(.BOTH.,#521568); +#521568 = SURFACE_SIDE_STYLE('',(#521569)); +#521569 = SURFACE_STYLE_FILL_AREA(#521570); +#521570 = FILL_AREA_STYLE('',(#521571)); +#521571 = FILL_AREA_STYLE_COLOUR('',#512538); +#521572 = CURVE_STYLE('',#521573,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521573 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521574 = STYLED_ITEM('color',(#521575),#177396); +#521575 = PRESENTATION_STYLE_ASSIGNMENT((#521576,#521581)); +#521576 = SURFACE_STYLE_USAGE(.BOTH.,#521577); +#521577 = SURFACE_SIDE_STYLE('',(#521578)); +#521578 = SURFACE_STYLE_FILL_AREA(#521579); +#521579 = FILL_AREA_STYLE('',(#521580)); +#521580 = FILL_AREA_STYLE_COLOUR('',#512538); +#521581 = CURVE_STYLE('',#521582,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521582 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521583 = STYLED_ITEM('color',(#521584),#177473); +#521584 = PRESENTATION_STYLE_ASSIGNMENT((#521585,#521590)); +#521585 = SURFACE_STYLE_USAGE(.BOTH.,#521586); +#521586 = SURFACE_SIDE_STYLE('',(#521587)); +#521587 = SURFACE_STYLE_FILL_AREA(#521588); +#521588 = FILL_AREA_STYLE('',(#521589)); +#521589 = FILL_AREA_STYLE_COLOUR('',#512538); +#521590 = CURVE_STYLE('',#521591,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521591 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521592 = STYLED_ITEM('color',(#521593),#177558); +#521593 = PRESENTATION_STYLE_ASSIGNMENT((#521594,#521599)); +#521594 = SURFACE_STYLE_USAGE(.BOTH.,#521595); +#521595 = SURFACE_SIDE_STYLE('',(#521596)); +#521596 = SURFACE_STYLE_FILL_AREA(#521597); +#521597 = FILL_AREA_STYLE('',(#521598)); +#521598 = FILL_AREA_STYLE_COLOUR('',#512538); +#521599 = CURVE_STYLE('',#521600,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521600 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521601 = STYLED_ITEM('color',(#521602),#177583); +#521602 = PRESENTATION_STYLE_ASSIGNMENT((#521603,#521608)); +#521603 = SURFACE_STYLE_USAGE(.BOTH.,#521604); +#521604 = SURFACE_SIDE_STYLE('',(#521605)); +#521605 = SURFACE_STYLE_FILL_AREA(#521606); +#521606 = FILL_AREA_STYLE('',(#521607)); +#521607 = FILL_AREA_STYLE_COLOUR('',#512538); +#521608 = CURVE_STYLE('',#521609,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521609 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521610 = STYLED_ITEM('color',(#521611),#177660); +#521611 = PRESENTATION_STYLE_ASSIGNMENT((#521612,#521617)); +#521612 = SURFACE_STYLE_USAGE(.BOTH.,#521613); +#521613 = SURFACE_SIDE_STYLE('',(#521614)); +#521614 = SURFACE_STYLE_FILL_AREA(#521615); +#521615 = FILL_AREA_STYLE('',(#521616)); +#521616 = FILL_AREA_STYLE_COLOUR('',#512501); +#521617 = CURVE_STYLE('',#521618,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521618 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521619 = STYLED_ITEM('color',(#521620),#177677); +#521620 = PRESENTATION_STYLE_ASSIGNMENT((#521621,#521626)); +#521621 = SURFACE_STYLE_USAGE(.BOTH.,#521622); +#521622 = SURFACE_SIDE_STYLE('',(#521623)); +#521623 = SURFACE_STYLE_FILL_AREA(#521624); +#521624 = FILL_AREA_STYLE('',(#521625)); +#521625 = FILL_AREA_STYLE_COLOUR('',#512538); +#521626 = CURVE_STYLE('',#521627,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521627 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521628 = STYLED_ITEM('color',(#521629),#177769); +#521629 = PRESENTATION_STYLE_ASSIGNMENT((#521630,#521635)); +#521630 = SURFACE_STYLE_USAGE(.BOTH.,#521631); +#521631 = SURFACE_SIDE_STYLE('',(#521632)); +#521632 = SURFACE_STYLE_FILL_AREA(#521633); +#521633 = FILL_AREA_STYLE('',(#521634)); +#521634 = FILL_AREA_STYLE_COLOUR('',#512538); +#521635 = CURVE_STYLE('',#521636,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521636 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521637 = STYLED_ITEM('color',(#521638),#177794); +#521638 = PRESENTATION_STYLE_ASSIGNMENT((#521639,#521644)); +#521639 = SURFACE_STYLE_USAGE(.BOTH.,#521640); +#521640 = SURFACE_SIDE_STYLE('',(#521641)); +#521641 = SURFACE_STYLE_FILL_AREA(#521642); +#521642 = FILL_AREA_STYLE('',(#521643)); +#521643 = FILL_AREA_STYLE_COLOUR('',#512538); +#521644 = CURVE_STYLE('',#521645,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521646 = STYLED_ITEM('color',(#521647),#177878); +#521647 = PRESENTATION_STYLE_ASSIGNMENT((#521648,#521653)); +#521648 = SURFACE_STYLE_USAGE(.BOTH.,#521649); +#521649 = SURFACE_SIDE_STYLE('',(#521650)); +#521650 = SURFACE_STYLE_FILL_AREA(#521651); +#521651 = FILL_AREA_STYLE('',(#521652)); +#521652 = FILL_AREA_STYLE_COLOUR('',#512538); +#521653 = CURVE_STYLE('',#521654,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521654 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521655 = STYLED_ITEM('color',(#521656),#177895); +#521656 = PRESENTATION_STYLE_ASSIGNMENT((#521657,#521662)); +#521657 = SURFACE_STYLE_USAGE(.BOTH.,#521658); +#521658 = SURFACE_SIDE_STYLE('',(#521659)); +#521659 = SURFACE_STYLE_FILL_AREA(#521660); +#521660 = FILL_AREA_STYLE('',(#521661)); +#521661 = FILL_AREA_STYLE_COLOUR('',#512538); +#521662 = CURVE_STYLE('',#521663,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521663 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521664 = STYLED_ITEM('color',(#521665),#177914); +#521665 = PRESENTATION_STYLE_ASSIGNMENT((#521666,#521671)); +#521666 = SURFACE_STYLE_USAGE(.BOTH.,#521667); +#521667 = SURFACE_SIDE_STYLE('',(#521668)); +#521668 = SURFACE_STYLE_FILL_AREA(#521669); +#521669 = FILL_AREA_STYLE('',(#521670)); +#521670 = FILL_AREA_STYLE_COLOUR('',#512538); +#521671 = CURVE_STYLE('',#521672,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521672 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521673 = STYLED_ITEM('color',(#521674),#177933); +#521674 = PRESENTATION_STYLE_ASSIGNMENT((#521675,#521680)); +#521675 = SURFACE_STYLE_USAGE(.BOTH.,#521676); +#521676 = SURFACE_SIDE_STYLE('',(#521677)); +#521677 = SURFACE_STYLE_FILL_AREA(#521678); +#521678 = FILL_AREA_STYLE('',(#521679)); +#521679 = FILL_AREA_STYLE_COLOUR('',#512501); +#521680 = CURVE_STYLE('',#521681,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521681 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521682 = STYLED_ITEM('color',(#521683),#177979); +#521683 = PRESENTATION_STYLE_ASSIGNMENT((#521684,#521689)); +#521684 = SURFACE_STYLE_USAGE(.BOTH.,#521685); +#521685 = SURFACE_SIDE_STYLE('',(#521686)); +#521686 = SURFACE_STYLE_FILL_AREA(#521687); +#521687 = FILL_AREA_STYLE('',(#521688)); +#521688 = FILL_AREA_STYLE_COLOUR('',#512501); +#521689 = CURVE_STYLE('',#521690,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521690 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521691 = STYLED_ITEM('color',(#521692),#177995); +#521692 = PRESENTATION_STYLE_ASSIGNMENT((#521693,#521698)); +#521693 = SURFACE_STYLE_USAGE(.BOTH.,#521694); +#521694 = SURFACE_SIDE_STYLE('',(#521695)); +#521695 = SURFACE_STYLE_FILL_AREA(#521696); +#521696 = FILL_AREA_STYLE('',(#521697)); +#521697 = FILL_AREA_STYLE_COLOUR('',#512538); +#521698 = CURVE_STYLE('',#521699,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521699 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521700 = STYLED_ITEM('color',(#521701),#178014); +#521701 = PRESENTATION_STYLE_ASSIGNMENT((#521702,#521707)); +#521702 = SURFACE_STYLE_USAGE(.BOTH.,#521703); +#521703 = SURFACE_SIDE_STYLE('',(#521704)); +#521704 = SURFACE_STYLE_FILL_AREA(#521705); +#521705 = FILL_AREA_STYLE('',(#521706)); +#521706 = FILL_AREA_STYLE_COLOUR('',#512501); +#521707 = CURVE_STYLE('',#521708,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521708 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521709 = STYLED_ITEM('color',(#521710),#178030); +#521710 = PRESENTATION_STYLE_ASSIGNMENT((#521711,#521716)); +#521711 = SURFACE_STYLE_USAGE(.BOTH.,#521712); +#521712 = SURFACE_SIDE_STYLE('',(#521713)); +#521713 = SURFACE_STYLE_FILL_AREA(#521714); +#521714 = FILL_AREA_STYLE('',(#521715)); +#521715 = FILL_AREA_STYLE_COLOUR('',#512538); +#521716 = CURVE_STYLE('',#521717,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521717 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521718 = STYLED_ITEM('color',(#521719),#178047); +#521719 = PRESENTATION_STYLE_ASSIGNMENT((#521720,#521725)); +#521720 = SURFACE_STYLE_USAGE(.BOTH.,#521721); +#521721 = SURFACE_SIDE_STYLE('',(#521722)); +#521722 = SURFACE_STYLE_FILL_AREA(#521723); +#521723 = FILL_AREA_STYLE('',(#521724)); +#521724 = FILL_AREA_STYLE_COLOUR('',#512501); +#521725 = CURVE_STYLE('',#521726,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#521726 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521727 = STYLED_ITEM('color',(#521728),#178059); +#521728 = PRESENTATION_STYLE_ASSIGNMENT((#521729,#521734)); +#521729 = SURFACE_STYLE_USAGE(.BOTH.,#521730); +#521730 = SURFACE_SIDE_STYLE('',(#521731)); +#521731 = SURFACE_STYLE_FILL_AREA(#521732); +#521732 = FILL_AREA_STYLE('',(#521733)); +#521733 = FILL_AREA_STYLE_COLOUR('',#512538); +#521734 = CURVE_STYLE('',#521735,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521735 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521736 = STYLED_ITEM('color',(#521737),#178076); +#521737 = PRESENTATION_STYLE_ASSIGNMENT((#521738,#521743)); +#521738 = SURFACE_STYLE_USAGE(.BOTH.,#521739); +#521739 = SURFACE_SIDE_STYLE('',(#521740)); +#521740 = SURFACE_STYLE_FILL_AREA(#521741); +#521741 = FILL_AREA_STYLE('',(#521742)); +#521742 = FILL_AREA_STYLE_COLOUR('',#512538); +#521743 = CURVE_STYLE('',#521744,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521744 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521745 = STYLED_ITEM('color',(#521746),#178093); +#521746 = PRESENTATION_STYLE_ASSIGNMENT((#521747,#521752)); +#521747 = SURFACE_STYLE_USAGE(.BOTH.,#521748); +#521748 = SURFACE_SIDE_STYLE('',(#521749)); +#521749 = SURFACE_STYLE_FILL_AREA(#521750); +#521750 = FILL_AREA_STYLE('',(#521751)); +#521751 = FILL_AREA_STYLE_COLOUR('',#512538); +#521752 = CURVE_STYLE('',#521753,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521753 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521754 = STYLED_ITEM('color',(#521755),#178110); +#521755 = PRESENTATION_STYLE_ASSIGNMENT((#521756,#521761)); +#521756 = SURFACE_STYLE_USAGE(.BOTH.,#521757); +#521757 = SURFACE_SIDE_STYLE('',(#521758)); +#521758 = SURFACE_STYLE_FILL_AREA(#521759); +#521759 = FILL_AREA_STYLE('',(#521760)); +#521760 = FILL_AREA_STYLE_COLOUR('',#512538); +#521761 = CURVE_STYLE('',#521762,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521762 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521763 = STYLED_ITEM('color',(#521764),#178127); +#521764 = PRESENTATION_STYLE_ASSIGNMENT((#521765,#521770)); +#521765 = SURFACE_STYLE_USAGE(.BOTH.,#521766); +#521766 = SURFACE_SIDE_STYLE('',(#521767)); +#521767 = SURFACE_STYLE_FILL_AREA(#521768); +#521768 = FILL_AREA_STYLE('',(#521769)); +#521769 = FILL_AREA_STYLE_COLOUR('',#512538); +#521770 = CURVE_STYLE('',#521771,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521771 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521772 = STYLED_ITEM('color',(#521773),#178144); +#521773 = PRESENTATION_STYLE_ASSIGNMENT((#521774,#521779)); +#521774 = SURFACE_STYLE_USAGE(.BOTH.,#521775); +#521775 = SURFACE_SIDE_STYLE('',(#521776)); +#521776 = SURFACE_STYLE_FILL_AREA(#521777); +#521777 = FILL_AREA_STYLE('',(#521778)); +#521778 = FILL_AREA_STYLE_COLOUR('',#512538); +#521779 = CURVE_STYLE('',#521780,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521780 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521781 = STYLED_ITEM('color',(#521782),#178161); +#521782 = PRESENTATION_STYLE_ASSIGNMENT((#521783,#521788)); +#521783 = SURFACE_STYLE_USAGE(.BOTH.,#521784); +#521784 = SURFACE_SIDE_STYLE('',(#521785)); +#521785 = SURFACE_STYLE_FILL_AREA(#521786); +#521786 = FILL_AREA_STYLE('',(#521787)); +#521787 = FILL_AREA_STYLE_COLOUR('',#512538); +#521788 = CURVE_STYLE('',#521789,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521789 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521790 = STYLED_ITEM('color',(#521791),#178178); +#521791 = PRESENTATION_STYLE_ASSIGNMENT((#521792,#521797)); +#521792 = SURFACE_STYLE_USAGE(.BOTH.,#521793); +#521793 = SURFACE_SIDE_STYLE('',(#521794)); +#521794 = SURFACE_STYLE_FILL_AREA(#521795); +#521795 = FILL_AREA_STYLE('',(#521796)); +#521796 = FILL_AREA_STYLE_COLOUR('',#512538); +#521797 = CURVE_STYLE('',#521798,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521799 = STYLED_ITEM('color',(#521800),#178190); +#521800 = PRESENTATION_STYLE_ASSIGNMENT((#521801,#521806)); +#521801 = SURFACE_STYLE_USAGE(.BOTH.,#521802); +#521802 = SURFACE_SIDE_STYLE('',(#521803)); +#521803 = SURFACE_STYLE_FILL_AREA(#521804); +#521804 = FILL_AREA_STYLE('',(#521805)); +#521805 = FILL_AREA_STYLE_COLOUR('',#512538); +#521806 = CURVE_STYLE('',#521807,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521807 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521808 = STYLED_ITEM('color',(#521809),#178207); +#521809 = PRESENTATION_STYLE_ASSIGNMENT((#521810,#521815)); +#521810 = SURFACE_STYLE_USAGE(.BOTH.,#521811); +#521811 = SURFACE_SIDE_STYLE('',(#521812)); +#521812 = SURFACE_STYLE_FILL_AREA(#521813); +#521813 = FILL_AREA_STYLE('',(#521814)); +#521814 = FILL_AREA_STYLE_COLOUR('',#512538); +#521815 = CURVE_STYLE('',#521816,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521816 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521817 = STYLED_ITEM('color',(#521818),#178224); +#521818 = PRESENTATION_STYLE_ASSIGNMENT((#521819,#521824)); +#521819 = SURFACE_STYLE_USAGE(.BOTH.,#521820); +#521820 = SURFACE_SIDE_STYLE('',(#521821)); +#521821 = SURFACE_STYLE_FILL_AREA(#521822); +#521822 = FILL_AREA_STYLE('',(#521823)); +#521823 = FILL_AREA_STYLE_COLOUR('',#512538); +#521824 = CURVE_STYLE('',#521825,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521825 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521826 = STYLED_ITEM('color',(#521827),#178241); +#521827 = PRESENTATION_STYLE_ASSIGNMENT((#521828,#521833)); +#521828 = SURFACE_STYLE_USAGE(.BOTH.,#521829); +#521829 = SURFACE_SIDE_STYLE('',(#521830)); +#521830 = SURFACE_STYLE_FILL_AREA(#521831); +#521831 = FILL_AREA_STYLE('',(#521832)); +#521832 = FILL_AREA_STYLE_COLOUR('',#512538); +#521833 = CURVE_STYLE('',#521834,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521834 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521835 = STYLED_ITEM('color',(#521836),#178258); +#521836 = PRESENTATION_STYLE_ASSIGNMENT((#521837,#521842)); +#521837 = SURFACE_STYLE_USAGE(.BOTH.,#521838); +#521838 = SURFACE_SIDE_STYLE('',(#521839)); +#521839 = SURFACE_STYLE_FILL_AREA(#521840); +#521840 = FILL_AREA_STYLE('',(#521841)); +#521841 = FILL_AREA_STYLE_COLOUR('',#512538); +#521842 = CURVE_STYLE('',#521843,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521843 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521844 = STYLED_ITEM('color',(#521845),#178275); +#521845 = PRESENTATION_STYLE_ASSIGNMENT((#521846,#521851)); +#521846 = SURFACE_STYLE_USAGE(.BOTH.,#521847); +#521847 = SURFACE_SIDE_STYLE('',(#521848)); +#521848 = SURFACE_STYLE_FILL_AREA(#521849); +#521849 = FILL_AREA_STYLE('',(#521850)); +#521850 = FILL_AREA_STYLE_COLOUR('',#512538); +#521851 = CURVE_STYLE('',#521852,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521852 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521853 = STYLED_ITEM('color',(#521854),#178292); +#521854 = PRESENTATION_STYLE_ASSIGNMENT((#521855,#521860)); +#521855 = SURFACE_STYLE_USAGE(.BOTH.,#521856); +#521856 = SURFACE_SIDE_STYLE('',(#521857)); +#521857 = SURFACE_STYLE_FILL_AREA(#521858); +#521858 = FILL_AREA_STYLE('',(#521859)); +#521859 = FILL_AREA_STYLE_COLOUR('',#512538); +#521860 = CURVE_STYLE('',#521861,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521861 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521862 = STYLED_ITEM('color',(#521863),#178309); +#521863 = PRESENTATION_STYLE_ASSIGNMENT((#521864,#521869)); +#521864 = SURFACE_STYLE_USAGE(.BOTH.,#521865); +#521865 = SURFACE_SIDE_STYLE('',(#521866)); +#521866 = SURFACE_STYLE_FILL_AREA(#521867); +#521867 = FILL_AREA_STYLE('',(#521868)); +#521868 = FILL_AREA_STYLE_COLOUR('',#512538); +#521869 = CURVE_STYLE('',#521870,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521870 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521871 = STYLED_ITEM('color',(#521872),#178321); +#521872 = PRESENTATION_STYLE_ASSIGNMENT((#521873,#521878)); +#521873 = SURFACE_STYLE_USAGE(.BOTH.,#521874); +#521874 = SURFACE_SIDE_STYLE('',(#521875)); +#521875 = SURFACE_STYLE_FILL_AREA(#521876); +#521876 = FILL_AREA_STYLE('',(#521877)); +#521877 = FILL_AREA_STYLE_COLOUR('',#512538); +#521878 = CURVE_STYLE('',#521879,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521879 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521880 = STYLED_ITEM('color',(#521881),#178338); +#521881 = PRESENTATION_STYLE_ASSIGNMENT((#521882,#521887)); +#521882 = SURFACE_STYLE_USAGE(.BOTH.,#521883); +#521883 = SURFACE_SIDE_STYLE('',(#521884)); +#521884 = SURFACE_STYLE_FILL_AREA(#521885); +#521885 = FILL_AREA_STYLE('',(#521886)); +#521886 = FILL_AREA_STYLE_COLOUR('',#512538); +#521887 = CURVE_STYLE('',#521888,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521888 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521889 = STYLED_ITEM('color',(#521890),#178355); +#521890 = PRESENTATION_STYLE_ASSIGNMENT((#521891,#521896)); +#521891 = SURFACE_STYLE_USAGE(.BOTH.,#521892); +#521892 = SURFACE_SIDE_STYLE('',(#521893)); +#521893 = SURFACE_STYLE_FILL_AREA(#521894); +#521894 = FILL_AREA_STYLE('',(#521895)); +#521895 = FILL_AREA_STYLE_COLOUR('',#512538); +#521896 = CURVE_STYLE('',#521897,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521897 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521898 = STYLED_ITEM('color',(#521899),#178372); +#521899 = PRESENTATION_STYLE_ASSIGNMENT((#521900,#521905)); +#521900 = SURFACE_STYLE_USAGE(.BOTH.,#521901); +#521901 = SURFACE_SIDE_STYLE('',(#521902)); +#521902 = SURFACE_STYLE_FILL_AREA(#521903); +#521903 = FILL_AREA_STYLE('',(#521904)); +#521904 = FILL_AREA_STYLE_COLOUR('',#512538); +#521905 = CURVE_STYLE('',#521906,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521906 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521907 = STYLED_ITEM('color',(#521908),#178389); +#521908 = PRESENTATION_STYLE_ASSIGNMENT((#521909,#521914)); +#521909 = SURFACE_STYLE_USAGE(.BOTH.,#521910); +#521910 = SURFACE_SIDE_STYLE('',(#521911)); +#521911 = SURFACE_STYLE_FILL_AREA(#521912); +#521912 = FILL_AREA_STYLE('',(#521913)); +#521913 = FILL_AREA_STYLE_COLOUR('',#512538); +#521914 = CURVE_STYLE('',#521915,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521916 = STYLED_ITEM('color',(#521917),#178406); +#521917 = PRESENTATION_STYLE_ASSIGNMENT((#521918,#521923)); +#521918 = SURFACE_STYLE_USAGE(.BOTH.,#521919); +#521919 = SURFACE_SIDE_STYLE('',(#521920)); +#521920 = SURFACE_STYLE_FILL_AREA(#521921); +#521921 = FILL_AREA_STYLE('',(#521922)); +#521922 = FILL_AREA_STYLE_COLOUR('',#512538); +#521923 = CURVE_STYLE('',#521924,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521924 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521925 = STYLED_ITEM('color',(#521926),#178423); +#521926 = PRESENTATION_STYLE_ASSIGNMENT((#521927,#521932)); +#521927 = SURFACE_STYLE_USAGE(.BOTH.,#521928); +#521928 = SURFACE_SIDE_STYLE('',(#521929)); +#521929 = SURFACE_STYLE_FILL_AREA(#521930); +#521930 = FILL_AREA_STYLE('',(#521931)); +#521931 = FILL_AREA_STYLE_COLOUR('',#512538); +#521932 = CURVE_STYLE('',#521933,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521933 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521934 = STYLED_ITEM('color',(#521935),#178435); +#521935 = PRESENTATION_STYLE_ASSIGNMENT((#521936,#521941)); +#521936 = SURFACE_STYLE_USAGE(.BOTH.,#521937); +#521937 = SURFACE_SIDE_STYLE('',(#521938)); +#521938 = SURFACE_STYLE_FILL_AREA(#521939); +#521939 = FILL_AREA_STYLE('',(#521940)); +#521940 = FILL_AREA_STYLE_COLOUR('',#512538); +#521941 = CURVE_STYLE('',#521942,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521942 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521943 = STYLED_ITEM('color',(#521944),#178452); +#521944 = PRESENTATION_STYLE_ASSIGNMENT((#521945,#521950)); +#521945 = SURFACE_STYLE_USAGE(.BOTH.,#521946); +#521946 = SURFACE_SIDE_STYLE('',(#521947)); +#521947 = SURFACE_STYLE_FILL_AREA(#521948); +#521948 = FILL_AREA_STYLE('',(#521949)); +#521949 = FILL_AREA_STYLE_COLOUR('',#512538); +#521950 = CURVE_STYLE('',#521951,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521951 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521952 = STYLED_ITEM('color',(#521953),#178469); +#521953 = PRESENTATION_STYLE_ASSIGNMENT((#521954,#521959)); +#521954 = SURFACE_STYLE_USAGE(.BOTH.,#521955); +#521955 = SURFACE_SIDE_STYLE('',(#521956)); +#521956 = SURFACE_STYLE_FILL_AREA(#521957); +#521957 = FILL_AREA_STYLE('',(#521958)); +#521958 = FILL_AREA_STYLE_COLOUR('',#512538); +#521959 = CURVE_STYLE('',#521960,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521960 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521961 = STYLED_ITEM('color',(#521962),#178486); +#521962 = PRESENTATION_STYLE_ASSIGNMENT((#521963,#521968)); +#521963 = SURFACE_STYLE_USAGE(.BOTH.,#521964); +#521964 = SURFACE_SIDE_STYLE('',(#521965)); +#521965 = SURFACE_STYLE_FILL_AREA(#521966); +#521966 = FILL_AREA_STYLE('',(#521967)); +#521967 = FILL_AREA_STYLE_COLOUR('',#512538); +#521968 = CURVE_STYLE('',#521969,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521969 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521970 = STYLED_ITEM('color',(#521971),#178503); +#521971 = PRESENTATION_STYLE_ASSIGNMENT((#521972,#521977)); +#521972 = SURFACE_STYLE_USAGE(.BOTH.,#521973); +#521973 = SURFACE_SIDE_STYLE('',(#521974)); +#521974 = SURFACE_STYLE_FILL_AREA(#521975); +#521975 = FILL_AREA_STYLE('',(#521976)); +#521976 = FILL_AREA_STYLE_COLOUR('',#512538); +#521977 = CURVE_STYLE('',#521978,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521978 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521979 = STYLED_ITEM('color',(#521980),#178520); +#521980 = PRESENTATION_STYLE_ASSIGNMENT((#521981,#521986)); +#521981 = SURFACE_STYLE_USAGE(.BOTH.,#521982); +#521982 = SURFACE_SIDE_STYLE('',(#521983)); +#521983 = SURFACE_STYLE_FILL_AREA(#521984); +#521984 = FILL_AREA_STYLE('',(#521985)); +#521985 = FILL_AREA_STYLE_COLOUR('',#512538); +#521986 = CURVE_STYLE('',#521987,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521987 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521988 = STYLED_ITEM('color',(#521989),#178537); +#521989 = PRESENTATION_STYLE_ASSIGNMENT((#521990,#521995)); +#521990 = SURFACE_STYLE_USAGE(.BOTH.,#521991); +#521991 = SURFACE_SIDE_STYLE('',(#521992)); +#521992 = SURFACE_STYLE_FILL_AREA(#521993); +#521993 = FILL_AREA_STYLE('',(#521994)); +#521994 = FILL_AREA_STYLE_COLOUR('',#512538); +#521995 = CURVE_STYLE('',#521996,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#521996 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#521997 = STYLED_ITEM('color',(#521998),#178549); +#521998 = PRESENTATION_STYLE_ASSIGNMENT((#521999,#522004)); +#521999 = SURFACE_STYLE_USAGE(.BOTH.,#522000); +#522000 = SURFACE_SIDE_STYLE('',(#522001)); +#522001 = SURFACE_STYLE_FILL_AREA(#522002); +#522002 = FILL_AREA_STYLE('',(#522003)); +#522003 = FILL_AREA_STYLE_COLOUR('',#512538); +#522004 = CURVE_STYLE('',#522005,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522005 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522006 = STYLED_ITEM('color',(#522007),#178566); +#522007 = PRESENTATION_STYLE_ASSIGNMENT((#522008,#522013)); +#522008 = SURFACE_STYLE_USAGE(.BOTH.,#522009); +#522009 = SURFACE_SIDE_STYLE('',(#522010)); +#522010 = SURFACE_STYLE_FILL_AREA(#522011); +#522011 = FILL_AREA_STYLE('',(#522012)); +#522012 = FILL_AREA_STYLE_COLOUR('',#512538); +#522013 = CURVE_STYLE('',#522014,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522014 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522015 = STYLED_ITEM('color',(#522016),#178583); +#522016 = PRESENTATION_STYLE_ASSIGNMENT((#522017,#522022)); +#522017 = SURFACE_STYLE_USAGE(.BOTH.,#522018); +#522018 = SURFACE_SIDE_STYLE('',(#522019)); +#522019 = SURFACE_STYLE_FILL_AREA(#522020); +#522020 = FILL_AREA_STYLE('',(#522021)); +#522021 = FILL_AREA_STYLE_COLOUR('',#512538); +#522022 = CURVE_STYLE('',#522023,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522023 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522024 = STYLED_ITEM('color',(#522025),#178600); +#522025 = PRESENTATION_STYLE_ASSIGNMENT((#522026,#522031)); +#522026 = SURFACE_STYLE_USAGE(.BOTH.,#522027); +#522027 = SURFACE_SIDE_STYLE('',(#522028)); +#522028 = SURFACE_STYLE_FILL_AREA(#522029); +#522029 = FILL_AREA_STYLE('',(#522030)); +#522030 = FILL_AREA_STYLE_COLOUR('',#512538); +#522031 = CURVE_STYLE('',#522032,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522032 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522033 = STYLED_ITEM('color',(#522034),#178617); +#522034 = PRESENTATION_STYLE_ASSIGNMENT((#522035,#522040)); +#522035 = SURFACE_STYLE_USAGE(.BOTH.,#522036); +#522036 = SURFACE_SIDE_STYLE('',(#522037)); +#522037 = SURFACE_STYLE_FILL_AREA(#522038); +#522038 = FILL_AREA_STYLE('',(#522039)); +#522039 = FILL_AREA_STYLE_COLOUR('',#512538); +#522040 = CURVE_STYLE('',#522041,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522041 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522042 = STYLED_ITEM('color',(#522043),#178634); +#522043 = PRESENTATION_STYLE_ASSIGNMENT((#522044,#522049)); +#522044 = SURFACE_STYLE_USAGE(.BOTH.,#522045); +#522045 = SURFACE_SIDE_STYLE('',(#522046)); +#522046 = SURFACE_STYLE_FILL_AREA(#522047); +#522047 = FILL_AREA_STYLE('',(#522048)); +#522048 = FILL_AREA_STYLE_COLOUR('',#512538); +#522049 = CURVE_STYLE('',#522050,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522051 = STYLED_ITEM('color',(#522052),#178651); +#522052 = PRESENTATION_STYLE_ASSIGNMENT((#522053,#522058)); +#522053 = SURFACE_STYLE_USAGE(.BOTH.,#522054); +#522054 = SURFACE_SIDE_STYLE('',(#522055)); +#522055 = SURFACE_STYLE_FILL_AREA(#522056); +#522056 = FILL_AREA_STYLE('',(#522057)); +#522057 = FILL_AREA_STYLE_COLOUR('',#512538); +#522058 = CURVE_STYLE('',#522059,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522060 = STYLED_ITEM('color',(#522061),#178668); +#522061 = PRESENTATION_STYLE_ASSIGNMENT((#522062,#522067)); +#522062 = SURFACE_STYLE_USAGE(.BOTH.,#522063); +#522063 = SURFACE_SIDE_STYLE('',(#522064)); +#522064 = SURFACE_STYLE_FILL_AREA(#522065); +#522065 = FILL_AREA_STYLE('',(#522066)); +#522066 = FILL_AREA_STYLE_COLOUR('',#512538); +#522067 = CURVE_STYLE('',#522068,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#522068 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522069 = STYLED_ITEM('color',(#522070),#178680); +#522070 = PRESENTATION_STYLE_ASSIGNMENT((#522071,#522076)); +#522071 = SURFACE_STYLE_USAGE(.BOTH.,#522072); +#522072 = SURFACE_SIDE_STYLE('',(#522073)); +#522073 = SURFACE_STYLE_FILL_AREA(#522074); +#522074 = FILL_AREA_STYLE('',(#522075)); +#522075 = FILL_AREA_STYLE_COLOUR('',#512989); +#522076 = CURVE_STYLE('',#522077,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#522077 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#522078 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #522079,#522086,#522093,#522100,#522107,#522114,#522121,#522128, + #522135,#522142,#522149,#522156,#522163,#522170,#522177,#522184, + #522191,#522198,#522205,#522212,#522219,#522226,#522233,#522240, + #522247,#522254,#522261,#522268,#522275,#522282,#522289,#522296, + #522303,#522310,#522317,#522324,#522331,#522338,#522345,#522352, + #522359,#522366,#522373,#522380,#522387,#522394,#522401,#522408, + #522415,#522422,#522429,#522436,#522443,#522450,#522457,#522464, + #522471,#522478,#522485,#522492,#522499,#522506,#522513,#522520, + #522527,#522534,#522541,#522548,#522555,#522562,#522569,#522576, + #522583,#522590,#522597,#522604,#522611,#522618,#522625,#522632, + #522639,#522646,#522653,#522660,#522667,#522674,#522681,#522688, + #522695,#522702,#522709,#522716,#522723,#522730,#522737,#522744, + #522751,#522758,#522765,#522772,#522779,#522786,#522793,#522800, + #522807,#522814,#522821,#522828,#522835,#522842,#522849,#522856, + #522863,#522870,#522877,#522884,#522891,#522898,#522905,#522912, + #522919,#522926,#522933,#522940,#522947,#522954,#522961,#522968, + #522975,#522982,#522989,#522996,#523003,#523010,#523017,#523024, + #523031,#523038,#523045,#523052,#523059,#523066,#523073,#523080, + #523087,#523094,#523101,#523108,#523115,#523122,#523129,#523136, + #523143,#523150,#523157,#523164,#523171,#523178,#523185,#523192, + #523199,#523206,#523213,#523220,#523227,#523234,#523241,#523248, + #523255,#523262,#523269,#523276,#523283,#523290,#523297,#523304, + #523311,#523318,#523325,#523332,#523339,#523346,#523353,#523360, + #523367,#523374,#523381,#523388,#523395,#523402,#523409,#523416, + #523423,#523430,#523437,#523444,#523451,#523458,#523465,#523472, + #523479,#523486,#523493,#523500,#523507,#523514,#523521,#523528, + #523535,#523542,#523549,#523556,#523563,#523570,#523577,#523584, + #523591,#523598,#523605,#523612,#523619,#523626,#523633,#523640, + #523647,#523654,#523661,#523668,#523675,#523682,#523689,#523696, + #523703,#523710,#523717,#523724,#523731,#523738,#523745,#523752, + #523759,#523766,#523773,#523780,#523787,#523794,#523801,#523808, + #523815,#523822),#326336); +#522079 = STYLED_ITEM('color',(#522080),#182992); +#522080 = PRESENTATION_STYLE_ASSIGNMENT((#522081)); +#522081 = SURFACE_STYLE_USAGE(.BOTH.,#522082); +#522082 = SURFACE_SIDE_STYLE('',(#522083)); +#522083 = SURFACE_STYLE_FILL_AREA(#522084); +#522084 = FILL_AREA_STYLE('',(#522085)); +#522085 = FILL_AREA_STYLE_COLOUR('',#516784); +#522086 = STYLED_ITEM('color',(#522087),#183350); +#522087 = PRESENTATION_STYLE_ASSIGNMENT((#522088)); +#522088 = SURFACE_STYLE_USAGE(.BOTH.,#522089); +#522089 = SURFACE_SIDE_STYLE('',(#522090)); +#522090 = SURFACE_STYLE_FILL_AREA(#522091); +#522091 = FILL_AREA_STYLE('',(#522092)); +#522092 = FILL_AREA_STYLE_COLOUR('',#516784); +#522093 = STYLED_ITEM('color',(#522094),#184481); +#522094 = PRESENTATION_STYLE_ASSIGNMENT((#522095)); +#522095 = SURFACE_STYLE_USAGE(.BOTH.,#522096); +#522096 = SURFACE_SIDE_STYLE('',(#522097)); +#522097 = SURFACE_STYLE_FILL_AREA(#522098); +#522098 = FILL_AREA_STYLE('',(#522099)); +#522099 = FILL_AREA_STYLE_COLOUR('',#516784); +#522100 = STYLED_ITEM('color',(#522101),#185402); +#522101 = PRESENTATION_STYLE_ASSIGNMENT((#522102)); +#522102 = SURFACE_STYLE_USAGE(.BOTH.,#522103); +#522103 = SURFACE_SIDE_STYLE('',(#522104)); +#522104 = SURFACE_STYLE_FILL_AREA(#522105); +#522105 = FILL_AREA_STYLE('',(#522106)); +#522106 = FILL_AREA_STYLE_COLOUR('',#516784); +#522107 = STYLED_ITEM('color',(#522108),#185867); +#522108 = PRESENTATION_STYLE_ASSIGNMENT((#522109)); +#522109 = SURFACE_STYLE_USAGE(.BOTH.,#522110); +#522110 = SURFACE_SIDE_STYLE('',(#522111)); +#522111 = SURFACE_STYLE_FILL_AREA(#522112); +#522112 = FILL_AREA_STYLE('',(#522113)); +#522113 = FILL_AREA_STYLE_COLOUR('',#516784); +#522114 = STYLED_ITEM('color',(#522115),#187089); +#522115 = PRESENTATION_STYLE_ASSIGNMENT((#522116)); +#522116 = SURFACE_STYLE_USAGE(.BOTH.,#522117); +#522117 = SURFACE_SIDE_STYLE('',(#522118)); +#522118 = SURFACE_STYLE_FILL_AREA(#522119); +#522119 = FILL_AREA_STYLE('',(#522120)); +#522120 = FILL_AREA_STYLE_COLOUR('',#516784); +#522121 = STYLED_ITEM('color',(#522122),#187843); +#522122 = PRESENTATION_STYLE_ASSIGNMENT((#522123)); +#522123 = SURFACE_STYLE_USAGE(.BOTH.,#522124); +#522124 = SURFACE_SIDE_STYLE('',(#522125)); +#522125 = SURFACE_STYLE_FILL_AREA(#522126); +#522126 = FILL_AREA_STYLE('',(#522127)); +#522127 = FILL_AREA_STYLE_COLOUR('',#516784); +#522128 = STYLED_ITEM('color',(#522129),#188201); +#522129 = PRESENTATION_STYLE_ASSIGNMENT((#522130)); +#522130 = SURFACE_STYLE_USAGE(.BOTH.,#522131); +#522131 = SURFACE_SIDE_STYLE('',(#522132)); +#522132 = SURFACE_STYLE_FILL_AREA(#522133); +#522133 = FILL_AREA_STYLE('',(#522134)); +#522134 = FILL_AREA_STYLE_COLOUR('',#516784); +#522135 = STYLED_ITEM('color',(#522136),#188664); +#522136 = PRESENTATION_STYLE_ASSIGNMENT((#522137)); +#522137 = SURFACE_STYLE_USAGE(.BOTH.,#522138); +#522138 = SURFACE_SIDE_STYLE('',(#522139)); +#522139 = SURFACE_STYLE_FILL_AREA(#522140); +#522140 = FILL_AREA_STYLE('',(#522141)); +#522141 = FILL_AREA_STYLE_COLOUR('',#516784); +#522142 = STYLED_ITEM('color',(#522143),#189088); +#522143 = PRESENTATION_STYLE_ASSIGNMENT((#522144)); +#522144 = SURFACE_STYLE_USAGE(.BOTH.,#522145); +#522145 = SURFACE_SIDE_STYLE('',(#522146)); +#522146 = SURFACE_STYLE_FILL_AREA(#522147); +#522147 = FILL_AREA_STYLE('',(#522148)); +#522148 = FILL_AREA_STYLE_COLOUR('',#516784); +#522149 = STYLED_ITEM('color',(#522150),#189551); +#522150 = PRESENTATION_STYLE_ASSIGNMENT((#522151)); +#522151 = SURFACE_STYLE_USAGE(.BOTH.,#522152); +#522152 = SURFACE_SIDE_STYLE('',(#522153)); +#522153 = SURFACE_STYLE_FILL_AREA(#522154); +#522154 = FILL_AREA_STYLE('',(#522155)); +#522155 = FILL_AREA_STYLE_COLOUR('',#516784); +#522156 = STYLED_ITEM('color',(#522157),#190014); +#522157 = PRESENTATION_STYLE_ASSIGNMENT((#522158)); +#522158 = SURFACE_STYLE_USAGE(.BOTH.,#522159); +#522159 = SURFACE_SIDE_STYLE('',(#522160)); +#522160 = SURFACE_STYLE_FILL_AREA(#522161); +#522161 = FILL_AREA_STYLE('',(#522162)); +#522162 = FILL_AREA_STYLE_COLOUR('',#516784); +#522163 = STYLED_ITEM('color',(#522164),#190374); +#522164 = PRESENTATION_STYLE_ASSIGNMENT((#522165)); +#522165 = SURFACE_STYLE_USAGE(.BOTH.,#522166); +#522166 = SURFACE_SIDE_STYLE('',(#522167)); +#522167 = SURFACE_STYLE_FILL_AREA(#522168); +#522168 = FILL_AREA_STYLE('',(#522169)); +#522169 = FILL_AREA_STYLE_COLOUR('',#516784); +#522170 = STYLED_ITEM('color',(#522171),#190732); +#522171 = PRESENTATION_STYLE_ASSIGNMENT((#522172)); +#522172 = SURFACE_STYLE_USAGE(.BOTH.,#522173); +#522173 = SURFACE_SIDE_STYLE('',(#522174)); +#522174 = SURFACE_STYLE_FILL_AREA(#522175); +#522175 = FILL_AREA_STYLE('',(#522176)); +#522176 = FILL_AREA_STYLE_COLOUR('',#516784); +#522177 = STYLED_ITEM('color',(#522178),#191195); +#522178 = PRESENTATION_STYLE_ASSIGNMENT((#522179)); +#522179 = SURFACE_STYLE_USAGE(.BOTH.,#522180); +#522180 = SURFACE_SIDE_STYLE('',(#522181)); +#522181 = SURFACE_STYLE_FILL_AREA(#522182); +#522182 = FILL_AREA_STYLE('',(#522183)); +#522183 = FILL_AREA_STYLE_COLOUR('',#516784); +#522184 = STYLED_ITEM('color',(#522185),#191553); +#522185 = PRESENTATION_STYLE_ASSIGNMENT((#522186)); +#522186 = SURFACE_STYLE_USAGE(.BOTH.,#522187); +#522187 = SURFACE_SIDE_STYLE('',(#522188)); +#522188 = SURFACE_STYLE_FILL_AREA(#522189); +#522189 = FILL_AREA_STYLE('',(#522190)); +#522190 = FILL_AREA_STYLE_COLOUR('',#516784); +#522191 = STYLED_ITEM('color',(#522192),#191911); +#522192 = PRESENTATION_STYLE_ASSIGNMENT((#522193)); +#522193 = SURFACE_STYLE_USAGE(.BOTH.,#522194); +#522194 = SURFACE_SIDE_STYLE('',(#522195)); +#522195 = SURFACE_STYLE_FILL_AREA(#522196); +#522196 = FILL_AREA_STYLE('',(#522197)); +#522197 = FILL_AREA_STYLE_COLOUR('',#516784); +#522198 = STYLED_ITEM('color',(#522199),#192572); +#522199 = PRESENTATION_STYLE_ASSIGNMENT((#522200)); +#522200 = SURFACE_STYLE_USAGE(.BOTH.,#522201); +#522201 = SURFACE_SIDE_STYLE('',(#522202)); +#522202 = SURFACE_STYLE_FILL_AREA(#522203); +#522203 = FILL_AREA_STYLE('',(#522204)); +#522204 = FILL_AREA_STYLE_COLOUR('',#516784); +#522205 = STYLED_ITEM('color',(#522206),#192831); +#522206 = PRESENTATION_STYLE_ASSIGNMENT((#522207)); +#522207 = SURFACE_STYLE_USAGE(.BOTH.,#522208); +#522208 = SURFACE_SIDE_STYLE('',(#522209)); +#522209 = SURFACE_STYLE_FILL_AREA(#522210); +#522210 = FILL_AREA_STYLE('',(#522211)); +#522211 = FILL_AREA_STYLE_COLOUR('',#516784); +#522212 = STYLED_ITEM('color',(#522213),#193189); +#522213 = PRESENTATION_STYLE_ASSIGNMENT((#522214)); +#522214 = SURFACE_STYLE_USAGE(.BOTH.,#522215); +#522215 = SURFACE_SIDE_STYLE('',(#522216)); +#522216 = SURFACE_STYLE_FILL_AREA(#522217); +#522217 = FILL_AREA_STYLE('',(#522218)); +#522218 = FILL_AREA_STYLE_COLOUR('',#516784); +#522219 = STYLED_ITEM('color',(#522220),#195368); +#522220 = PRESENTATION_STYLE_ASSIGNMENT((#522221)); +#522221 = SURFACE_STYLE_USAGE(.BOTH.,#522222); +#522222 = SURFACE_SIDE_STYLE('',(#522223)); +#522223 = SURFACE_STYLE_FILL_AREA(#522224); +#522224 = FILL_AREA_STYLE('',(#522225)); +#522225 = FILL_AREA_STYLE_COLOUR('',#516784); +#522226 = STYLED_ITEM('color',(#522227),#196522); +#522227 = PRESENTATION_STYLE_ASSIGNMENT((#522228)); +#522228 = SURFACE_STYLE_USAGE(.BOTH.,#522229); +#522229 = SURFACE_SIDE_STYLE('',(#522230)); +#522230 = SURFACE_STYLE_FILL_AREA(#522231); +#522231 = FILL_AREA_STYLE('',(#522232)); +#522232 = FILL_AREA_STYLE_COLOUR('',#516784); +#522233 = STYLED_ITEM('color',(#522234),#198272); +#522234 = PRESENTATION_STYLE_ASSIGNMENT((#522235)); +#522235 = SURFACE_STYLE_USAGE(.BOTH.,#522236); +#522236 = SURFACE_SIDE_STYLE('',(#522237)); +#522237 = SURFACE_STYLE_FILL_AREA(#522238); +#522238 = FILL_AREA_STYLE('',(#522239)); +#522239 = FILL_AREA_STYLE_COLOUR('',#516784); +#522240 = STYLED_ITEM('color',(#522241),#198630); +#522241 = PRESENTATION_STYLE_ASSIGNMENT((#522242)); +#522242 = SURFACE_STYLE_USAGE(.BOTH.,#522243); +#522243 = SURFACE_SIDE_STYLE('',(#522244)); +#522244 = SURFACE_STYLE_FILL_AREA(#522245); +#522245 = FILL_AREA_STYLE('',(#522246)); +#522246 = FILL_AREA_STYLE_COLOUR('',#516784); +#522247 = STYLED_ITEM('color',(#522248),#199324); +#522248 = PRESENTATION_STYLE_ASSIGNMENT((#522249)); +#522249 = SURFACE_STYLE_USAGE(.BOTH.,#522250); +#522250 = SURFACE_SIDE_STYLE('',(#522251)); +#522251 = SURFACE_STYLE_FILL_AREA(#522252); +#522252 = FILL_AREA_STYLE('',(#522253)); +#522253 = FILL_AREA_STYLE_COLOUR('',#516784); +#522254 = STYLED_ITEM('color',(#522255),#200282); +#522255 = PRESENTATION_STYLE_ASSIGNMENT((#522256)); +#522256 = SURFACE_STYLE_USAGE(.BOTH.,#522257); +#522257 = SURFACE_SIDE_STYLE('',(#522258)); +#522258 = SURFACE_STYLE_FILL_AREA(#522259); +#522259 = FILL_AREA_STYLE('',(#522260)); +#522260 = FILL_AREA_STYLE_COLOUR('',#516784); +#522261 = STYLED_ITEM('color',(#522262),#201531); +#522262 = PRESENTATION_STYLE_ASSIGNMENT((#522263)); +#522263 = SURFACE_STYLE_USAGE(.BOTH.,#522264); +#522264 = SURFACE_SIDE_STYLE('',(#522265)); +#522265 = SURFACE_STYLE_FILL_AREA(#522266); +#522266 = FILL_AREA_STYLE('',(#522267)); +#522267 = FILL_AREA_STYLE_COLOUR('',#516784); +#522268 = STYLED_ITEM('color',(#522269),#201856); +#522269 = PRESENTATION_STYLE_ASSIGNMENT((#522270)); +#522270 = SURFACE_STYLE_USAGE(.BOTH.,#522271); +#522271 = SURFACE_SIDE_STYLE('',(#522272)); +#522272 = SURFACE_STYLE_FILL_AREA(#522273); +#522273 = FILL_AREA_STYLE('',(#522274)); +#522274 = FILL_AREA_STYLE_COLOUR('',#516784); +#522275 = STYLED_ITEM('color',(#522276),#202418); +#522276 = PRESENTATION_STYLE_ASSIGNMENT((#522277)); +#522277 = SURFACE_STYLE_USAGE(.BOTH.,#522278); +#522278 = SURFACE_SIDE_STYLE('',(#522279)); +#522279 = SURFACE_STYLE_FILL_AREA(#522280); +#522280 = FILL_AREA_STYLE('',(#522281)); +#522281 = FILL_AREA_STYLE_COLOUR('',#516784); +#522282 = STYLED_ITEM('color',(#522283),#203044); +#522283 = PRESENTATION_STYLE_ASSIGNMENT((#522284)); +#522284 = SURFACE_STYLE_USAGE(.BOTH.,#522285); +#522285 = SURFACE_SIDE_STYLE('',(#522286)); +#522286 = SURFACE_STYLE_FILL_AREA(#522287); +#522287 = FILL_AREA_STYLE('',(#522288)); +#522288 = FILL_AREA_STYLE_COLOUR('',#516784); +#522289 = STYLED_ITEM('color',(#522290),#203435); +#522290 = PRESENTATION_STYLE_ASSIGNMENT((#522291)); +#522291 = SURFACE_STYLE_USAGE(.BOTH.,#522292); +#522292 = SURFACE_SIDE_STYLE('',(#522293)); +#522293 = SURFACE_STYLE_FILL_AREA(#522294); +#522294 = FILL_AREA_STYLE('',(#522295)); +#522295 = FILL_AREA_STYLE_COLOUR('',#516784); +#522296 = STYLED_ITEM('color',(#522297),#203898); +#522297 = PRESENTATION_STYLE_ASSIGNMENT((#522298)); +#522298 = SURFACE_STYLE_USAGE(.BOTH.,#522299); +#522299 = SURFACE_SIDE_STYLE('',(#522300)); +#522300 = SURFACE_STYLE_FILL_AREA(#522301); +#522301 = FILL_AREA_STYLE('',(#522302)); +#522302 = FILL_AREA_STYLE_COLOUR('',#516784); +#522303 = STYLED_ITEM('color',(#522304),#204522); +#522304 = PRESENTATION_STYLE_ASSIGNMENT((#522305)); +#522305 = SURFACE_STYLE_USAGE(.BOTH.,#522306); +#522306 = SURFACE_SIDE_STYLE('',(#522307)); +#522307 = SURFACE_STYLE_FILL_AREA(#522308); +#522308 = FILL_AREA_STYLE('',(#522309)); +#522309 = FILL_AREA_STYLE_COLOUR('',#516784); +#522310 = STYLED_ITEM('color',(#522311),#204880); +#522311 = PRESENTATION_STYLE_ASSIGNMENT((#522312)); +#522312 = SURFACE_STYLE_USAGE(.BOTH.,#522313); +#522313 = SURFACE_SIDE_STYLE('',(#522314)); +#522314 = SURFACE_STYLE_FILL_AREA(#522315); +#522315 = FILL_AREA_STYLE('',(#522316)); +#522316 = FILL_AREA_STYLE_COLOUR('',#516784); +#522317 = STYLED_ITEM('color',(#522318),#205541); +#522318 = PRESENTATION_STYLE_ASSIGNMENT((#522319)); +#522319 = SURFACE_STYLE_USAGE(.BOTH.,#522320); +#522320 = SURFACE_SIDE_STYLE('',(#522321)); +#522321 = SURFACE_STYLE_FILL_AREA(#522322); +#522322 = FILL_AREA_STYLE('',(#522323)); +#522323 = FILL_AREA_STYLE_COLOUR('',#516784); +#522324 = STYLED_ITEM('color',(#522325),#206196); +#522325 = PRESENTATION_STYLE_ASSIGNMENT((#522326)); +#522326 = SURFACE_STYLE_USAGE(.BOTH.,#522327); +#522327 = SURFACE_SIDE_STYLE('',(#522328)); +#522328 = SURFACE_STYLE_FILL_AREA(#522329); +#522329 = FILL_AREA_STYLE('',(#522330)); +#522330 = FILL_AREA_STYLE_COLOUR('',#516784); +#522331 = STYLED_ITEM('color',(#522332),#207909); +#522332 = PRESENTATION_STYLE_ASSIGNMENT((#522333)); +#522333 = SURFACE_STYLE_USAGE(.BOTH.,#522334); +#522334 = SURFACE_SIDE_STYLE('',(#522335)); +#522335 = SURFACE_STYLE_FILL_AREA(#522336); +#522336 = FILL_AREA_STYLE('',(#522337)); +#522337 = FILL_AREA_STYLE_COLOUR('',#516784); +#522338 = STYLED_ITEM('color',(#522339),#209065); +#522339 = PRESENTATION_STYLE_ASSIGNMENT((#522340)); +#522340 = SURFACE_STYLE_USAGE(.BOTH.,#522341); +#522341 = SURFACE_SIDE_STYLE('',(#522342)); +#522342 = SURFACE_STYLE_FILL_AREA(#522343); +#522343 = FILL_AREA_STYLE('',(#522344)); +#522344 = FILL_AREA_STYLE_COLOUR('',#516784); +#522345 = STYLED_ITEM('color',(#522346),#210217); +#522346 = PRESENTATION_STYLE_ASSIGNMENT((#522347)); +#522347 = SURFACE_STYLE_USAGE(.BOTH.,#522348); +#522348 = SURFACE_SIDE_STYLE('',(#522349)); +#522349 = SURFACE_STYLE_FILL_AREA(#522350); +#522350 = FILL_AREA_STYLE('',(#522351)); +#522351 = FILL_AREA_STYLE_COLOUR('',#516784); +#522352 = STYLED_ITEM('color',(#522353),#210575); +#522353 = PRESENTATION_STYLE_ASSIGNMENT((#522354)); +#522354 = SURFACE_STYLE_USAGE(.BOTH.,#522355); +#522355 = SURFACE_SIDE_STYLE('',(#522356)); +#522356 = SURFACE_STYLE_FILL_AREA(#522357); +#522357 = FILL_AREA_STYLE('',(#522358)); +#522358 = FILL_AREA_STYLE_COLOUR('',#516784); +#522359 = STYLED_ITEM('color',(#522360),#211038); +#522360 = PRESENTATION_STYLE_ASSIGNMENT((#522361)); +#522361 = SURFACE_STYLE_USAGE(.BOTH.,#522362); +#522362 = SURFACE_SIDE_STYLE('',(#522363)); +#522363 = SURFACE_STYLE_FILL_AREA(#522364); +#522364 = FILL_AREA_STYLE('',(#522365)); +#522365 = FILL_AREA_STYLE_COLOUR('',#516784); +#522366 = STYLED_ITEM('color',(#522367),#211891); +#522367 = PRESENTATION_STYLE_ASSIGNMENT((#522368)); +#522368 = SURFACE_STYLE_USAGE(.BOTH.,#522369); +#522369 = SURFACE_SIDE_STYLE('',(#522370)); +#522370 = SURFACE_STYLE_FILL_AREA(#522371); +#522371 = FILL_AREA_STYLE('',(#522372)); +#522372 = FILL_AREA_STYLE_COLOUR('',#516784); +#522373 = STYLED_ITEM('color',(#522374),#212845); +#522374 = PRESENTATION_STYLE_ASSIGNMENT((#522375)); +#522375 = SURFACE_STYLE_USAGE(.BOTH.,#522376); +#522376 = SURFACE_SIDE_STYLE('',(#522377)); +#522377 = SURFACE_STYLE_FILL_AREA(#522378); +#522378 = FILL_AREA_STYLE('',(#522379)); +#522379 = FILL_AREA_STYLE_COLOUR('',#516784); +#522380 = STYLED_ITEM('color',(#522381),#213407); +#522381 = PRESENTATION_STYLE_ASSIGNMENT((#522382)); +#522382 = SURFACE_STYLE_USAGE(.BOTH.,#522383); +#522383 = SURFACE_SIDE_STYLE('',(#522384)); +#522384 = SURFACE_STYLE_FILL_AREA(#522385); +#522385 = FILL_AREA_STYLE('',(#522386)); +#522386 = FILL_AREA_STYLE_COLOUR('',#516784); +#522387 = STYLED_ITEM('color',(#522388),#213864); +#522388 = PRESENTATION_STYLE_ASSIGNMENT((#522389)); +#522389 = SURFACE_STYLE_USAGE(.BOTH.,#522390); +#522390 = SURFACE_SIDE_STYLE('',(#522391)); +#522391 = SURFACE_STYLE_FILL_AREA(#522392); +#522392 = FILL_AREA_STYLE('',(#522393)); +#522393 = FILL_AREA_STYLE_COLOUR('',#516784); +#522394 = STYLED_ITEM('color',(#522395),#214321); +#522395 = PRESENTATION_STYLE_ASSIGNMENT((#522396)); +#522396 = SURFACE_STYLE_USAGE(.BOTH.,#522397); +#522397 = SURFACE_SIDE_STYLE('',(#522398)); +#522398 = SURFACE_STYLE_FILL_AREA(#522399); +#522399 = FILL_AREA_STYLE('',(#522400)); +#522400 = FILL_AREA_STYLE_COLOUR('',#516784); +#522401 = STYLED_ITEM('color',(#522402),#214679); +#522402 = PRESENTATION_STYLE_ASSIGNMENT((#522403)); +#522403 = SURFACE_STYLE_USAGE(.BOTH.,#522404); +#522404 = SURFACE_SIDE_STYLE('',(#522405)); +#522405 = SURFACE_STYLE_FILL_AREA(#522406); +#522406 = FILL_AREA_STYLE('',(#522407)); +#522407 = FILL_AREA_STYLE_COLOUR('',#516784); +#522408 = STYLED_ITEM('color',(#522409),#215037); +#522409 = PRESENTATION_STYLE_ASSIGNMENT((#522410)); +#522410 = SURFACE_STYLE_USAGE(.BOTH.,#522411); +#522411 = SURFACE_SIDE_STYLE('',(#522412)); +#522412 = SURFACE_STYLE_FILL_AREA(#522413); +#522413 = FILL_AREA_STYLE('',(#522414)); +#522414 = FILL_AREA_STYLE_COLOUR('',#516784); +#522415 = STYLED_ITEM('color',(#522416),#215692); +#522416 = PRESENTATION_STYLE_ASSIGNMENT((#522417)); +#522417 = SURFACE_STYLE_USAGE(.BOTH.,#522418); +#522418 = SURFACE_SIDE_STYLE('',(#522419)); +#522419 = SURFACE_STYLE_FILL_AREA(#522420); +#522420 = FILL_AREA_STYLE('',(#522421)); +#522421 = FILL_AREA_STYLE_COLOUR('',#516784); +#522422 = STYLED_ITEM('color',(#522423),#216248); +#522423 = PRESENTATION_STYLE_ASSIGNMENT((#522424)); +#522424 = SURFACE_STYLE_USAGE(.BOTH.,#522425); +#522425 = SURFACE_SIDE_STYLE('',(#522426)); +#522426 = SURFACE_STYLE_FILL_AREA(#522427); +#522427 = FILL_AREA_STYLE('',(#522428)); +#522428 = FILL_AREA_STYLE_COLOUR('',#516784); +#522429 = STYLED_ITEM('color',(#522430),#216711); +#522430 = PRESENTATION_STYLE_ASSIGNMENT((#522431)); +#522431 = SURFACE_STYLE_USAGE(.BOTH.,#522432); +#522432 = SURFACE_SIDE_STYLE('',(#522433)); +#522433 = SURFACE_STYLE_FILL_AREA(#522434); +#522434 = FILL_AREA_STYLE('',(#522435)); +#522435 = FILL_AREA_STYLE_COLOUR('',#516784); +#522436 = STYLED_ITEM('color',(#522437),#217063); +#522437 = PRESENTATION_STYLE_ASSIGNMENT((#522438)); +#522438 = SURFACE_STYLE_USAGE(.BOTH.,#522439); +#522439 = SURFACE_SIDE_STYLE('',(#522440)); +#522440 = SURFACE_STYLE_FILL_AREA(#522441); +#522441 = FILL_AREA_STYLE('',(#522442)); +#522442 = FILL_AREA_STYLE_COLOUR('',#516784); +#522443 = STYLED_ITEM('color',(#522444),#217679); +#522444 = PRESENTATION_STYLE_ASSIGNMENT((#522445)); +#522445 = SURFACE_STYLE_USAGE(.BOTH.,#522446); +#522446 = SURFACE_SIDE_STYLE('',(#522447)); +#522447 = SURFACE_STYLE_FILL_AREA(#522448); +#522448 = FILL_AREA_STYLE('',(#522449)); +#522449 = FILL_AREA_STYLE_COLOUR('',#516784); +#522450 = STYLED_ITEM('color',(#522451),#218435); +#522451 = PRESENTATION_STYLE_ASSIGNMENT((#522452)); +#522452 = SURFACE_STYLE_USAGE(.BOTH.,#522453); +#522453 = SURFACE_SIDE_STYLE('',(#522454)); +#522454 = SURFACE_STYLE_FILL_AREA(#522455); +#522455 = FILL_AREA_STYLE('',(#522456)); +#522456 = FILL_AREA_STYLE_COLOUR('',#516784); +#522457 = STYLED_ITEM('color',(#522458),#220948); +#522458 = PRESENTATION_STYLE_ASSIGNMENT((#522459)); +#522459 = SURFACE_STYLE_USAGE(.BOTH.,#522460); +#522460 = SURFACE_SIDE_STYLE('',(#522461)); +#522461 = SURFACE_STYLE_FILL_AREA(#522462); +#522462 = FILL_AREA_STYLE('',(#522463)); +#522463 = FILL_AREA_STYLE_COLOUR('',#516784); +#522464 = STYLED_ITEM('color',(#522465),#222898); +#522465 = PRESENTATION_STYLE_ASSIGNMENT((#522466)); +#522466 = SURFACE_STYLE_USAGE(.BOTH.,#522467); +#522467 = SURFACE_SIDE_STYLE('',(#522468)); +#522468 = SURFACE_STYLE_FILL_AREA(#522469); +#522469 = FILL_AREA_STYLE('',(#522470)); +#522470 = FILL_AREA_STYLE_COLOUR('',#516784); +#522471 = STYLED_ITEM('color',(#522472),#223559); +#522472 = PRESENTATION_STYLE_ASSIGNMENT((#522473)); +#522473 = SURFACE_STYLE_USAGE(.BOTH.,#522474); +#522474 = SURFACE_SIDE_STYLE('',(#522475)); +#522475 = SURFACE_STYLE_FILL_AREA(#522476); +#522476 = FILL_AREA_STYLE('',(#522477)); +#522477 = FILL_AREA_STYLE_COLOUR('',#516784); +#522478 = STYLED_ITEM('color',(#522479),#223917); +#522479 = PRESENTATION_STYLE_ASSIGNMENT((#522480)); +#522480 = SURFACE_STYLE_USAGE(.BOTH.,#522481); +#522481 = SURFACE_SIDE_STYLE('',(#522482)); +#522482 = SURFACE_STYLE_FILL_AREA(#522483); +#522483 = FILL_AREA_STYLE('',(#522484)); +#522484 = FILL_AREA_STYLE_COLOUR('',#516784); +#522485 = STYLED_ITEM('color',(#522486),#224176); +#522486 = PRESENTATION_STYLE_ASSIGNMENT((#522487)); +#522487 = SURFACE_STYLE_USAGE(.BOTH.,#522488); +#522488 = SURFACE_SIDE_STYLE('',(#522489)); +#522489 = SURFACE_STYLE_FILL_AREA(#522490); +#522490 = FILL_AREA_STYLE('',(#522491)); +#522491 = FILL_AREA_STYLE_COLOUR('',#516784); +#522492 = STYLED_ITEM('color',(#522493),#225926); +#522493 = PRESENTATION_STYLE_ASSIGNMENT((#522494)); +#522494 = SURFACE_STYLE_USAGE(.BOTH.,#522495); +#522495 = SURFACE_SIDE_STYLE('',(#522496)); +#522496 = SURFACE_STYLE_FILL_AREA(#522497); +#522497 = FILL_AREA_STYLE('',(#522498)); +#522498 = FILL_AREA_STYLE_COLOUR('',#516784); +#522499 = STYLED_ITEM('color',(#522500),#228072); +#522500 = PRESENTATION_STYLE_ASSIGNMENT((#522501)); +#522501 = SURFACE_STYLE_USAGE(.BOTH.,#522502); +#522502 = SURFACE_SIDE_STYLE('',(#522503)); +#522503 = SURFACE_STYLE_FILL_AREA(#522504); +#522504 = FILL_AREA_STYLE('',(#522505)); +#522505 = FILL_AREA_STYLE_COLOUR('',#516784); +#522506 = STYLED_ITEM('color',(#522507),#228727); +#522507 = PRESENTATION_STYLE_ASSIGNMENT((#522508)); +#522508 = SURFACE_STYLE_USAGE(.BOTH.,#522509); +#522509 = SURFACE_SIDE_STYLE('',(#522510)); +#522510 = SURFACE_STYLE_FILL_AREA(#522511); +#522511 = FILL_AREA_STYLE('',(#522512)); +#522512 = FILL_AREA_STYLE_COLOUR('',#516784); +#522513 = STYLED_ITEM('color',(#522514),#229388); +#522514 = PRESENTATION_STYLE_ASSIGNMENT((#522515)); +#522515 = SURFACE_STYLE_USAGE(.BOTH.,#522516); +#522516 = SURFACE_SIDE_STYLE('',(#522517)); +#522517 = SURFACE_STYLE_FILL_AREA(#522518); +#522518 = FILL_AREA_STYLE('',(#522519)); +#522519 = FILL_AREA_STYLE_COLOUR('',#516784); +#522520 = STYLED_ITEM('color',(#522521),#230994); +#522521 = PRESENTATION_STYLE_ASSIGNMENT((#522522)); +#522522 = SURFACE_STYLE_USAGE(.BOTH.,#522523); +#522523 = SURFACE_SIDE_STYLE('',(#522524)); +#522524 = SURFACE_STYLE_FILL_AREA(#522525); +#522525 = FILL_AREA_STYLE('',(#522526)); +#522526 = FILL_AREA_STYLE_COLOUR('',#516784); +#522527 = STYLED_ITEM('color',(#522528),#233891); +#522528 = PRESENTATION_STYLE_ASSIGNMENT((#522529)); +#522529 = SURFACE_STYLE_USAGE(.BOTH.,#522530); +#522530 = SURFACE_SIDE_STYLE('',(#522531)); +#522531 = SURFACE_STYLE_FILL_AREA(#522532); +#522532 = FILL_AREA_STYLE('',(#522533)); +#522533 = FILL_AREA_STYLE_COLOUR('',#516784); +#522534 = STYLED_ITEM('color',(#522535),#235732); +#522535 = PRESENTATION_STYLE_ASSIGNMENT((#522536)); +#522536 = SURFACE_STYLE_USAGE(.BOTH.,#522537); +#522537 = SURFACE_SIDE_STYLE('',(#522538)); +#522538 = SURFACE_STYLE_FILL_AREA(#522539); +#522539 = FILL_AREA_STYLE('',(#522540)); +#522540 = FILL_AREA_STYLE_COLOUR('',#516784); +#522541 = STYLED_ITEM('color',(#522542),#236789); +#522542 = PRESENTATION_STYLE_ASSIGNMENT((#522543)); +#522543 = SURFACE_STYLE_USAGE(.BOTH.,#522544); +#522544 = SURFACE_SIDE_STYLE('',(#522545)); +#522545 = SURFACE_STYLE_FILL_AREA(#522546); +#522546 = FILL_AREA_STYLE('',(#522547)); +#522547 = FILL_AREA_STYLE_COLOUR('',#516784); +#522548 = STYLED_ITEM('color',(#522549),#237246); +#522549 = PRESENTATION_STYLE_ASSIGNMENT((#522550)); +#522550 = SURFACE_STYLE_USAGE(.BOTH.,#522551); +#522551 = SURFACE_SIDE_STYLE('',(#522552)); +#522552 = SURFACE_STYLE_FILL_AREA(#522553); +#522553 = FILL_AREA_STYLE('',(#522554)); +#522554 = FILL_AREA_STYLE_COLOUR('',#516784); +#522555 = STYLED_ITEM('color',(#522556),#238297); +#522556 = PRESENTATION_STYLE_ASSIGNMENT((#522557)); +#522557 = SURFACE_STYLE_USAGE(.BOTH.,#522558); +#522558 = SURFACE_SIDE_STYLE('',(#522559)); +#522559 = SURFACE_STYLE_FILL_AREA(#522560); +#522560 = FILL_AREA_STYLE('',(#522561)); +#522561 = FILL_AREA_STYLE_COLOUR('',#516784); +#522562 = STYLED_ITEM('color',(#522563),#239554); +#522563 = PRESENTATION_STYLE_ASSIGNMENT((#522564)); +#522564 = SURFACE_STYLE_USAGE(.BOTH.,#522565); +#522565 = SURFACE_SIDE_STYLE('',(#522566)); +#522566 = SURFACE_STYLE_FILL_AREA(#522567); +#522567 = FILL_AREA_STYLE('',(#522568)); +#522568 = FILL_AREA_STYLE_COLOUR('',#516784); +#522569 = STYLED_ITEM('color',(#522570),#240116); +#522570 = PRESENTATION_STYLE_ASSIGNMENT((#522571)); +#522571 = SURFACE_STYLE_USAGE(.BOTH.,#522572); +#522572 = SURFACE_SIDE_STYLE('',(#522573)); +#522573 = SURFACE_STYLE_FILL_AREA(#522574); +#522574 = FILL_AREA_STYLE('',(#522575)); +#522575 = FILL_AREA_STYLE_COLOUR('',#516784); +#522576 = STYLED_ITEM('color',(#522577),#241068); +#522577 = PRESENTATION_STYLE_ASSIGNMENT((#522578)); +#522578 = SURFACE_STYLE_USAGE(.BOTH.,#522579); +#522579 = SURFACE_SIDE_STYLE('',(#522580)); +#522580 = SURFACE_STYLE_FILL_AREA(#522581); +#522581 = FILL_AREA_STYLE('',(#522582)); +#522582 = FILL_AREA_STYLE_COLOUR('',#516784); +#522583 = STYLED_ITEM('color',(#522584),#241725); +#522584 = PRESENTATION_STYLE_ASSIGNMENT((#522585)); +#522585 = SURFACE_STYLE_USAGE(.BOTH.,#522586); +#522586 = SURFACE_SIDE_STYLE('',(#522587)); +#522587 = SURFACE_STYLE_FILL_AREA(#522588); +#522588 = FILL_AREA_STYLE('',(#522589)); +#522589 = FILL_AREA_STYLE_COLOUR('',#516784); +#522590 = STYLED_ITEM('color',(#522591),#242982); +#522591 = PRESENTATION_STYLE_ASSIGNMENT((#522592)); +#522592 = SURFACE_STYLE_USAGE(.BOTH.,#522593); +#522593 = SURFACE_SIDE_STYLE('',(#522594)); +#522594 = SURFACE_STYLE_FILL_AREA(#522595); +#522595 = FILL_AREA_STYLE('',(#522596)); +#522596 = FILL_AREA_STYLE_COLOUR('',#516784); +#522597 = STYLED_ITEM('color',(#522598),#244132); +#522598 = PRESENTATION_STYLE_ASSIGNMENT((#522599)); +#522599 = SURFACE_STYLE_USAGE(.BOTH.,#522600); +#522600 = SURFACE_SIDE_STYLE('',(#522601)); +#522601 = SURFACE_STYLE_FILL_AREA(#522602); +#522602 = FILL_AREA_STYLE('',(#522603)); +#522603 = FILL_AREA_STYLE_COLOUR('',#516784); +#522604 = STYLED_ITEM('color',(#522605),#244488); +#522605 = PRESENTATION_STYLE_ASSIGNMENT((#522606)); +#522606 = SURFACE_STYLE_USAGE(.BOTH.,#522607); +#522607 = SURFACE_SIDE_STYLE('',(#522608)); +#522608 = SURFACE_STYLE_FILL_AREA(#522609); +#522609 = FILL_AREA_STYLE('',(#522610)); +#522610 = FILL_AREA_STYLE_COLOUR('',#516784); +#522611 = STYLED_ITEM('color',(#522612),#245341); +#522612 = PRESENTATION_STYLE_ASSIGNMENT((#522613)); +#522613 = SURFACE_STYLE_USAGE(.BOTH.,#522614); +#522614 = SURFACE_SIDE_STYLE('',(#522615)); +#522615 = SURFACE_STYLE_FILL_AREA(#522616); +#522616 = FILL_AREA_STYLE('',(#522617)); +#522617 = FILL_AREA_STYLE_COLOUR('',#516784); +#522618 = STYLED_ITEM('color',(#522619),#246592); +#522619 = PRESENTATION_STYLE_ASSIGNMENT((#522620)); +#522620 = SURFACE_STYLE_USAGE(.BOTH.,#522621); +#522621 = SURFACE_SIDE_STYLE('',(#522622)); +#522622 = SURFACE_STYLE_FILL_AREA(#522623); +#522623 = FILL_AREA_STYLE('',(#522624)); +#522624 = FILL_AREA_STYLE_COLOUR('',#516784); +#522625 = STYLED_ITEM('color',(#522626),#247839); +#522626 = PRESENTATION_STYLE_ASSIGNMENT((#522627)); +#522627 = SURFACE_STYLE_USAGE(.BOTH.,#522628); +#522628 = SURFACE_SIDE_STYLE('',(#522629)); +#522629 = SURFACE_STYLE_FILL_AREA(#522630); +#522630 = FILL_AREA_STYLE('',(#522631)); +#522631 = FILL_AREA_STYLE_COLOUR('',#516784); +#522632 = STYLED_ITEM('color',(#522633),#249484); +#522633 = PRESENTATION_STYLE_ASSIGNMENT((#522634)); +#522634 = SURFACE_STYLE_USAGE(.BOTH.,#522635); +#522635 = SURFACE_SIDE_STYLE('',(#522636)); +#522636 = SURFACE_STYLE_FILL_AREA(#522637); +#522637 = FILL_AREA_STYLE('',(#522638)); +#522638 = FILL_AREA_STYLE_COLOUR('',#516784); +#522639 = STYLED_ITEM('color',(#522640),#250300); +#522640 = PRESENTATION_STYLE_ASSIGNMENT((#522641)); +#522641 = SURFACE_STYLE_USAGE(.BOTH.,#522642); +#522642 = SURFACE_SIDE_STYLE('',(#522643)); +#522643 = SURFACE_STYLE_FILL_AREA(#522644); +#522644 = FILL_AREA_STYLE('',(#522645)); +#522645 = FILL_AREA_STYLE_COLOUR('',#516784); +#522646 = STYLED_ITEM('color',(#522647),#251642); +#522647 = PRESENTATION_STYLE_ASSIGNMENT((#522648)); +#522648 = SURFACE_STYLE_USAGE(.BOTH.,#522649); +#522649 = SURFACE_SIDE_STYLE('',(#522650)); +#522650 = SURFACE_STYLE_FILL_AREA(#522651); +#522651 = FILL_AREA_STYLE('',(#522652)); +#522652 = FILL_AREA_STYLE_COLOUR('',#516784); +#522653 = STYLED_ITEM('color',(#522654),#252132); +#522654 = PRESENTATION_STYLE_ASSIGNMENT((#522655)); +#522655 = SURFACE_STYLE_USAGE(.BOTH.,#522656); +#522656 = SURFACE_SIDE_STYLE('',(#522657)); +#522657 = SURFACE_STYLE_FILL_AREA(#522658); +#522658 = FILL_AREA_STYLE('',(#522659)); +#522659 = FILL_AREA_STYLE_COLOUR('',#516784); +#522660 = STYLED_ITEM('color',(#522661),#252490); +#522661 = PRESENTATION_STYLE_ASSIGNMENT((#522662)); +#522662 = SURFACE_STYLE_USAGE(.BOTH.,#522663); +#522663 = SURFACE_SIDE_STYLE('',(#522664)); +#522664 = SURFACE_STYLE_FILL_AREA(#522665); +#522665 = FILL_AREA_STYLE('',(#522666)); +#522666 = FILL_AREA_STYLE_COLOUR('',#516784); +#522667 = STYLED_ITEM('color',(#522668),#252953); +#522668 = PRESENTATION_STYLE_ASSIGNMENT((#522669)); +#522669 = SURFACE_STYLE_USAGE(.BOTH.,#522670); +#522670 = SURFACE_SIDE_STYLE('',(#522671)); +#522671 = SURFACE_STYLE_FILL_AREA(#522672); +#522672 = FILL_AREA_STYLE('',(#522673)); +#522673 = FILL_AREA_STYLE_COLOUR('',#516784); +#522674 = STYLED_ITEM('color',(#522675),#253309); +#522675 = PRESENTATION_STYLE_ASSIGNMENT((#522676)); +#522676 = SURFACE_STYLE_USAGE(.BOTH.,#522677); +#522677 = SURFACE_SIDE_STYLE('',(#522678)); +#522678 = SURFACE_STYLE_FILL_AREA(#522679); +#522679 = FILL_AREA_STYLE('',(#522680)); +#522680 = FILL_AREA_STYLE_COLOUR('',#516784); +#522681 = STYLED_ITEM('color',(#522682),#255389); +#522682 = PRESENTATION_STYLE_ASSIGNMENT((#522683)); +#522683 = SURFACE_STYLE_USAGE(.BOTH.,#522684); +#522684 = SURFACE_SIDE_STYLE('',(#522685)); +#522685 = SURFACE_STYLE_FILL_AREA(#522686); +#522686 = FILL_AREA_STYLE('',(#522687)); +#522687 = FILL_AREA_STYLE_COLOUR('',#516784); +#522688 = STYLED_ITEM('color',(#522689),#256248); +#522689 = PRESENTATION_STYLE_ASSIGNMENT((#522690)); +#522690 = SURFACE_STYLE_USAGE(.BOTH.,#522691); +#522691 = SURFACE_SIDE_STYLE('',(#522692)); +#522692 = SURFACE_STYLE_FILL_AREA(#522693); +#522693 = FILL_AREA_STYLE('',(#522694)); +#522694 = FILL_AREA_STYLE_COLOUR('',#516784); +#522695 = STYLED_ITEM('color',(#522696),#256606); +#522696 = PRESENTATION_STYLE_ASSIGNMENT((#522697)); +#522697 = SURFACE_STYLE_USAGE(.BOTH.,#522698); +#522698 = SURFACE_SIDE_STYLE('',(#522699)); +#522699 = SURFACE_STYLE_FILL_AREA(#522700); +#522700 = FILL_AREA_STYLE('',(#522701)); +#522701 = FILL_AREA_STYLE_COLOUR('',#516784); +#522702 = STYLED_ITEM('color',(#522703),#258055); +#522703 = PRESENTATION_STYLE_ASSIGNMENT((#522704)); +#522704 = SURFACE_STYLE_USAGE(.BOTH.,#522705); +#522705 = SURFACE_SIDE_STYLE('',(#522706)); +#522706 = SURFACE_STYLE_FILL_AREA(#522707); +#522707 = FILL_AREA_STYLE('',(#522708)); +#522708 = FILL_AREA_STYLE_COLOUR('',#516784); +#522709 = STYLED_ITEM('color',(#522710),#258716); +#522710 = PRESENTATION_STYLE_ASSIGNMENT((#522711)); +#522711 = SURFACE_STYLE_USAGE(.BOTH.,#522712); +#522712 = SURFACE_SIDE_STYLE('',(#522713)); +#522713 = SURFACE_STYLE_FILL_AREA(#522714); +#522714 = FILL_AREA_STYLE('',(#522715)); +#522715 = FILL_AREA_STYLE_COLOUR('',#516784); +#522716 = STYLED_ITEM('color',(#522717),#259268); +#522717 = PRESENTATION_STYLE_ASSIGNMENT((#522718)); +#522718 = SURFACE_STYLE_USAGE(.BOTH.,#522719); +#522719 = SURFACE_SIDE_STYLE('',(#522720)); +#522720 = SURFACE_STYLE_FILL_AREA(#522721); +#522721 = FILL_AREA_STYLE('',(#522722)); +#522722 = FILL_AREA_STYLE_COLOUR('',#516784); +#522723 = STYLED_ITEM('color',(#522724),#259422); +#522724 = PRESENTATION_STYLE_ASSIGNMENT((#522725)); +#522725 = SURFACE_STYLE_USAGE(.BOTH.,#522726); +#522726 = SURFACE_SIDE_STYLE('',(#522727)); +#522727 = SURFACE_STYLE_FILL_AREA(#522728); +#522728 = FILL_AREA_STYLE('',(#522729)); +#522729 = FILL_AREA_STYLE_COLOUR('',#516784); +#522730 = STYLED_ITEM('color',(#522731),#259755); +#522731 = PRESENTATION_STYLE_ASSIGNMENT((#522732)); +#522732 = SURFACE_STYLE_USAGE(.BOTH.,#522733); +#522733 = SURFACE_SIDE_STYLE('',(#522734)); +#522734 = SURFACE_STYLE_FILL_AREA(#522735); +#522735 = FILL_AREA_STYLE('',(#522736)); +#522736 = FILL_AREA_STYLE_COLOUR('',#516784); +#522737 = STYLED_ITEM('color',(#522738),#260257); +#522738 = PRESENTATION_STYLE_ASSIGNMENT((#522739)); +#522739 = SURFACE_STYLE_USAGE(.BOTH.,#522740); +#522740 = SURFACE_SIDE_STYLE('',(#522741)); +#522741 = SURFACE_STYLE_FILL_AREA(#522742); +#522742 = FILL_AREA_STYLE('',(#522743)); +#522743 = FILL_AREA_STYLE_COLOUR('',#516784); +#522744 = STYLED_ITEM('color',(#522745),#260819); +#522745 = PRESENTATION_STYLE_ASSIGNMENT((#522746)); +#522746 = SURFACE_STYLE_USAGE(.BOTH.,#522747); +#522747 = SURFACE_SIDE_STYLE('',(#522748)); +#522748 = SURFACE_STYLE_FILL_AREA(#522749); +#522749 = FILL_AREA_STYLE('',(#522750)); +#522750 = FILL_AREA_STYLE_COLOUR('',#516784); +#522751 = STYLED_ITEM('color',(#522752),#261152); +#522752 = PRESENTATION_STYLE_ASSIGNMENT((#522753)); +#522753 = SURFACE_STYLE_USAGE(.BOTH.,#522754); +#522754 = SURFACE_SIDE_STYLE('',(#522755)); +#522755 = SURFACE_STYLE_FILL_AREA(#522756); +#522756 = FILL_AREA_STYLE('',(#522757)); +#522757 = FILL_AREA_STYLE_COLOUR('',#516784); +#522758 = STYLED_ITEM('color',(#522759),#261446); +#522759 = PRESENTATION_STYLE_ASSIGNMENT((#522760)); +#522760 = SURFACE_STYLE_USAGE(.BOTH.,#522761); +#522761 = SURFACE_SIDE_STYLE('',(#522762)); +#522762 = SURFACE_STYLE_FILL_AREA(#522763); +#522763 = FILL_AREA_STYLE('',(#522764)); +#522764 = FILL_AREA_STYLE_COLOUR('',#516784); +#522765 = STYLED_ITEM('color',(#522766),#262590); +#522766 = PRESENTATION_STYLE_ASSIGNMENT((#522767)); +#522767 = SURFACE_STYLE_USAGE(.BOTH.,#522768); +#522768 = SURFACE_SIDE_STYLE('',(#522769)); +#522769 = SURFACE_STYLE_FILL_AREA(#522770); +#522770 = FILL_AREA_STYLE('',(#522771)); +#522771 = FILL_AREA_STYLE_COLOUR('',#516784); +#522772 = STYLED_ITEM('color',(#522773),#263107); +#522773 = PRESENTATION_STYLE_ASSIGNMENT((#522774)); +#522774 = SURFACE_STYLE_USAGE(.BOTH.,#522775); +#522775 = SURFACE_SIDE_STYLE('',(#522776)); +#522776 = SURFACE_STYLE_FILL_AREA(#522777); +#522777 = FILL_AREA_STYLE('',(#522778)); +#522778 = FILL_AREA_STYLE_COLOUR('',#516784); +#522779 = STYLED_ITEM('color',(#522780),#264350); +#522780 = PRESENTATION_STYLE_ASSIGNMENT((#522781)); +#522781 = SURFACE_STYLE_USAGE(.BOTH.,#522782); +#522782 = SURFACE_SIDE_STYLE('',(#522783)); +#522783 = SURFACE_STYLE_FILL_AREA(#522784); +#522784 = FILL_AREA_STYLE('',(#522785)); +#522785 = FILL_AREA_STYLE_COLOUR('',#516784); +#522786 = STYLED_ITEM('color',(#522787),#264702); +#522787 = PRESENTATION_STYLE_ASSIGNMENT((#522788)); +#522788 = SURFACE_STYLE_USAGE(.BOTH.,#522789); +#522789 = SURFACE_SIDE_STYLE('',(#522790)); +#522790 = SURFACE_STYLE_FILL_AREA(#522791); +#522791 = FILL_AREA_STYLE('',(#522792)); +#522792 = FILL_AREA_STYLE_COLOUR('',#516784); +#522793 = STYLED_ITEM('color',(#522794),#265157); +#522794 = PRESENTATION_STYLE_ASSIGNMENT((#522795)); +#522795 = SURFACE_STYLE_USAGE(.BOTH.,#522796); +#522796 = SURFACE_SIDE_STYLE('',(#522797)); +#522797 = SURFACE_STYLE_FILL_AREA(#522798); +#522798 = FILL_AREA_STYLE('',(#522799)); +#522799 = FILL_AREA_STYLE_COLOUR('',#516784); +#522800 = STYLED_ITEM('color',(#522801),#265575); +#522801 = PRESENTATION_STYLE_ASSIGNMENT((#522802)); +#522802 = SURFACE_STYLE_USAGE(.BOTH.,#522803); +#522803 = SURFACE_SIDE_STYLE('',(#522804)); +#522804 = SURFACE_STYLE_FILL_AREA(#522805); +#522805 = FILL_AREA_STYLE('',(#522806)); +#522806 = FILL_AREA_STYLE_COLOUR('',#516784); +#522807 = STYLED_ITEM('color',(#522808),#266626); +#522808 = PRESENTATION_STYLE_ASSIGNMENT((#522809)); +#522809 = SURFACE_STYLE_USAGE(.BOTH.,#522810); +#522810 = SURFACE_SIDE_STYLE('',(#522811)); +#522811 = SURFACE_STYLE_FILL_AREA(#522812); +#522812 = FILL_AREA_STYLE('',(#522813)); +#522813 = FILL_AREA_STYLE_COLOUR('',#516784); +#522814 = STYLED_ITEM('color',(#522815),#266945); +#522815 = PRESENTATION_STYLE_ASSIGNMENT((#522816)); +#522816 = SURFACE_STYLE_USAGE(.BOTH.,#522817); +#522817 = SURFACE_SIDE_STYLE('',(#522818)); +#522818 = SURFACE_STYLE_FILL_AREA(#522819); +#522819 = FILL_AREA_STYLE('',(#522820)); +#522820 = FILL_AREA_STYLE_COLOUR('',#516784); +#522821 = STYLED_ITEM('color',(#522822),#267396); +#522822 = PRESENTATION_STYLE_ASSIGNMENT((#522823)); +#522823 = SURFACE_STYLE_USAGE(.BOTH.,#522824); +#522824 = SURFACE_SIDE_STYLE('',(#522825)); +#522825 = SURFACE_STYLE_FILL_AREA(#522826); +#522826 = FILL_AREA_STYLE('',(#522827)); +#522827 = FILL_AREA_STYLE_COLOUR('',#516784); +#522828 = STYLED_ITEM('color',(#522829),#267946); +#522829 = PRESENTATION_STYLE_ASSIGNMENT((#522830)); +#522830 = SURFACE_STYLE_USAGE(.BOTH.,#522831); +#522831 = SURFACE_SIDE_STYLE('',(#522832)); +#522832 = SURFACE_STYLE_FILL_AREA(#522833); +#522833 = FILL_AREA_STYLE('',(#522834)); +#522834 = FILL_AREA_STYLE_COLOUR('',#516784); +#522835 = STYLED_ITEM('color',(#522836),#268164); +#522836 = PRESENTATION_STYLE_ASSIGNMENT((#522837)); +#522837 = SURFACE_STYLE_USAGE(.BOTH.,#522838); +#522838 = SURFACE_SIDE_STYLE('',(#522839)); +#522839 = SURFACE_STYLE_FILL_AREA(#522840); +#522840 = FILL_AREA_STYLE('',(#522841)); +#522841 = FILL_AREA_STYLE_COLOUR('',#516784); +#522842 = STYLED_ITEM('color',(#522843),#268419); +#522843 = PRESENTATION_STYLE_ASSIGNMENT((#522844)); +#522844 = SURFACE_STYLE_USAGE(.BOTH.,#522845); +#522845 = SURFACE_SIDE_STYLE('',(#522846)); +#522846 = SURFACE_STYLE_FILL_AREA(#522847); +#522847 = FILL_AREA_STYLE('',(#522848)); +#522848 = FILL_AREA_STYLE_COLOUR('',#516784); +#522849 = STYLED_ITEM('color',(#522850),#268812); +#522850 = PRESENTATION_STYLE_ASSIGNMENT((#522851)); +#522851 = SURFACE_STYLE_USAGE(.BOTH.,#522852); +#522852 = SURFACE_SIDE_STYLE('',(#522853)); +#522853 = SURFACE_STYLE_FILL_AREA(#522854); +#522854 = FILL_AREA_STYLE('',(#522855)); +#522855 = FILL_AREA_STYLE_COLOUR('',#516784); +#522856 = STYLED_ITEM('color',(#522857),#269638); +#522857 = PRESENTATION_STYLE_ASSIGNMENT((#522858)); +#522858 = SURFACE_STYLE_USAGE(.BOTH.,#522859); +#522859 = SURFACE_SIDE_STYLE('',(#522860)); +#522860 = SURFACE_STYLE_FILL_AREA(#522861); +#522861 = FILL_AREA_STYLE('',(#522862)); +#522862 = FILL_AREA_STYLE_COLOUR('',#516784); +#522863 = STYLED_ITEM('color',(#522864),#270095); +#522864 = PRESENTATION_STYLE_ASSIGNMENT((#522865)); +#522865 = SURFACE_STYLE_USAGE(.BOTH.,#522866); +#522866 = SURFACE_SIDE_STYLE('',(#522867)); +#522867 = SURFACE_STYLE_FILL_AREA(#522868); +#522868 = FILL_AREA_STYLE('',(#522869)); +#522869 = FILL_AREA_STYLE_COLOUR('',#516784); +#522870 = STYLED_ITEM('color',(#522871),#270694); +#522871 = PRESENTATION_STYLE_ASSIGNMENT((#522872)); +#522872 = SURFACE_STYLE_USAGE(.BOTH.,#522873); +#522873 = SURFACE_SIDE_STYLE('',(#522874)); +#522874 = SURFACE_STYLE_FILL_AREA(#522875); +#522875 = FILL_AREA_STYLE('',(#522876)); +#522876 = FILL_AREA_STYLE_COLOUR('',#516784); +#522877 = STYLED_ITEM('color',(#522878),#271850); +#522878 = PRESENTATION_STYLE_ASSIGNMENT((#522879)); +#522879 = SURFACE_STYLE_USAGE(.BOTH.,#522880); +#522880 = SURFACE_SIDE_STYLE('',(#522881)); +#522881 = SURFACE_STYLE_FILL_AREA(#522882); +#522882 = FILL_AREA_STYLE('',(#522883)); +#522883 = FILL_AREA_STYLE_COLOUR('',#516784); +#522884 = STYLED_ITEM('color',(#522885),#272771); +#522885 = PRESENTATION_STYLE_ASSIGNMENT((#522886)); +#522886 = SURFACE_STYLE_USAGE(.BOTH.,#522887); +#522887 = SURFACE_SIDE_STYLE('',(#522888)); +#522888 = SURFACE_STYLE_FILL_AREA(#522889); +#522889 = FILL_AREA_STYLE('',(#522890)); +#522890 = FILL_AREA_STYLE_COLOUR('',#516784); +#522891 = STYLED_ITEM('color',(#522892),#273129); +#522892 = PRESENTATION_STYLE_ASSIGNMENT((#522893)); +#522893 = SURFACE_STYLE_USAGE(.BOTH.,#522894); +#522894 = SURFACE_SIDE_STYLE('',(#522895)); +#522895 = SURFACE_STYLE_FILL_AREA(#522896); +#522896 = FILL_AREA_STYLE('',(#522897)); +#522897 = FILL_AREA_STYLE_COLOUR('',#516784); +#522898 = STYLED_ITEM('color',(#522899),#273221); +#522899 = PRESENTATION_STYLE_ASSIGNMENT((#522900)); +#522900 = SURFACE_STYLE_USAGE(.BOTH.,#522901); +#522901 = SURFACE_SIDE_STYLE('',(#522902)); +#522902 = SURFACE_STYLE_FILL_AREA(#522903); +#522903 = FILL_AREA_STYLE('',(#522904)); +#522904 = FILL_AREA_STYLE_COLOUR('',#516784); +#522905 = STYLED_ITEM('color',(#522906),#273804); +#522906 = PRESENTATION_STYLE_ASSIGNMENT((#522907)); +#522907 = SURFACE_STYLE_USAGE(.BOTH.,#522908); +#522908 = SURFACE_SIDE_STYLE('',(#522909)); +#522909 = SURFACE_STYLE_FILL_AREA(#522910); +#522910 = FILL_AREA_STYLE('',(#522911)); +#522911 = FILL_AREA_STYLE_COLOUR('',#516784); +#522912 = STYLED_ITEM('color',(#522913),#274552); +#522913 = PRESENTATION_STYLE_ASSIGNMENT((#522914)); +#522914 = SURFACE_STYLE_USAGE(.BOTH.,#522915); +#522915 = SURFACE_SIDE_STYLE('',(#522916)); +#522916 = SURFACE_STYLE_FILL_AREA(#522917); +#522917 = FILL_AREA_STYLE('',(#522918)); +#522918 = FILL_AREA_STYLE_COLOUR('',#516784); +#522919 = STYLED_ITEM('color',(#522920),#275036); +#522920 = PRESENTATION_STYLE_ASSIGNMENT((#522921)); +#522921 = SURFACE_STYLE_USAGE(.BOTH.,#522922); +#522922 = SURFACE_SIDE_STYLE('',(#522923)); +#522923 = SURFACE_STYLE_FILL_AREA(#522924); +#522924 = FILL_AREA_STYLE('',(#522925)); +#522925 = FILL_AREA_STYLE_COLOUR('',#516784); +#522926 = STYLED_ITEM('color',(#522927),#275128); +#522927 = PRESENTATION_STYLE_ASSIGNMENT((#522928)); +#522928 = SURFACE_STYLE_USAGE(.BOTH.,#522929); +#522929 = SURFACE_SIDE_STYLE('',(#522930)); +#522930 = SURFACE_STYLE_FILL_AREA(#522931); +#522931 = FILL_AREA_STYLE('',(#522932)); +#522932 = FILL_AREA_STYLE_COLOUR('',#516784); +#522933 = STYLED_ITEM('color',(#522934),#275220); +#522934 = PRESENTATION_STYLE_ASSIGNMENT((#522935)); +#522935 = SURFACE_STYLE_USAGE(.BOTH.,#522936); +#522936 = SURFACE_SIDE_STYLE('',(#522937)); +#522937 = SURFACE_STYLE_FILL_AREA(#522938); +#522938 = FILL_AREA_STYLE('',(#522939)); +#522939 = FILL_AREA_STYLE_COLOUR('',#516784); +#522940 = STYLED_ITEM('color',(#522941),#275312); +#522941 = PRESENTATION_STYLE_ASSIGNMENT((#522942)); +#522942 = SURFACE_STYLE_USAGE(.BOTH.,#522943); +#522943 = SURFACE_SIDE_STYLE('',(#522944)); +#522944 = SURFACE_STYLE_FILL_AREA(#522945); +#522945 = FILL_AREA_STYLE('',(#522946)); +#522946 = FILL_AREA_STYLE_COLOUR('',#516784); +#522947 = STYLED_ITEM('color',(#522948),#275835); +#522948 = PRESENTATION_STYLE_ASSIGNMENT((#522949)); +#522949 = SURFACE_STYLE_USAGE(.BOTH.,#522950); +#522950 = SURFACE_SIDE_STYLE('',(#522951)); +#522951 = SURFACE_STYLE_FILL_AREA(#522952); +#522952 = FILL_AREA_STYLE('',(#522953)); +#522953 = FILL_AREA_STYLE_COLOUR('',#516784); +#522954 = STYLED_ITEM('color',(#522955),#276290); +#522955 = PRESENTATION_STYLE_ASSIGNMENT((#522956)); +#522956 = SURFACE_STYLE_USAGE(.BOTH.,#522957); +#522957 = SURFACE_SIDE_STYLE('',(#522958)); +#522958 = SURFACE_STYLE_FILL_AREA(#522959); +#522959 = FILL_AREA_STYLE('',(#522960)); +#522960 = FILL_AREA_STYLE_COLOUR('',#516784); +#522961 = STYLED_ITEM('color',(#522962),#277112); +#522962 = PRESENTATION_STYLE_ASSIGNMENT((#522963)); +#522963 = SURFACE_STYLE_USAGE(.BOTH.,#522964); +#522964 = SURFACE_SIDE_STYLE('',(#522965)); +#522965 = SURFACE_STYLE_FILL_AREA(#522966); +#522966 = FILL_AREA_STYLE('',(#522967)); +#522967 = FILL_AREA_STYLE_COLOUR('',#516784); +#522968 = STYLED_ITEM('color',(#522969),#277470); +#522969 = PRESENTATION_STYLE_ASSIGNMENT((#522970)); +#522970 = SURFACE_STYLE_USAGE(.BOTH.,#522971); +#522971 = SURFACE_SIDE_STYLE('',(#522972)); +#522972 = SURFACE_STYLE_FILL_AREA(#522973); +#522973 = FILL_AREA_STYLE('',(#522974)); +#522974 = FILL_AREA_STYLE_COLOUR('',#516784); +#522975 = STYLED_ITEM('color',(#522976),#277562); +#522976 = PRESENTATION_STYLE_ASSIGNMENT((#522977)); +#522977 = SURFACE_STYLE_USAGE(.BOTH.,#522978); +#522978 = SURFACE_SIDE_STYLE('',(#522979)); +#522979 = SURFACE_STYLE_FILL_AREA(#522980); +#522980 = FILL_AREA_STYLE('',(#522981)); +#522981 = FILL_AREA_STYLE_COLOUR('',#516784); +#522982 = STYLED_ITEM('color',(#522983),#277654); +#522983 = PRESENTATION_STYLE_ASSIGNMENT((#522984)); +#522984 = SURFACE_STYLE_USAGE(.BOTH.,#522985); +#522985 = SURFACE_SIDE_STYLE('',(#522986)); +#522986 = SURFACE_STYLE_FILL_AREA(#522987); +#522987 = FILL_AREA_STYLE('',(#522988)); +#522988 = FILL_AREA_STYLE_COLOUR('',#516784); +#522989 = STYLED_ITEM('color',(#522990),#277746); +#522990 = PRESENTATION_STYLE_ASSIGNMENT((#522991)); +#522991 = SURFACE_STYLE_USAGE(.BOTH.,#522992); +#522992 = SURFACE_SIDE_STYLE('',(#522993)); +#522993 = SURFACE_STYLE_FILL_AREA(#522994); +#522994 = FILL_AREA_STYLE('',(#522995)); +#522995 = FILL_AREA_STYLE_COLOUR('',#516784); +#522996 = STYLED_ITEM('color',(#522997),#277838); +#522997 = PRESENTATION_STYLE_ASSIGNMENT((#522998)); +#522998 = SURFACE_STYLE_USAGE(.BOTH.,#522999); +#522999 = SURFACE_SIDE_STYLE('',(#523000)); +#523000 = SURFACE_STYLE_FILL_AREA(#523001); +#523001 = FILL_AREA_STYLE('',(#523002)); +#523002 = FILL_AREA_STYLE_COLOUR('',#516784); +#523003 = STYLED_ITEM('color',(#523004),#279126); +#523004 = PRESENTATION_STYLE_ASSIGNMENT((#523005)); +#523005 = SURFACE_STYLE_USAGE(.BOTH.,#523006); +#523006 = SURFACE_SIDE_STYLE('',(#523007)); +#523007 = SURFACE_STYLE_FILL_AREA(#523008); +#523008 = FILL_AREA_STYLE('',(#523009)); +#523009 = FILL_AREA_STYLE_COLOUR('',#516784); +#523010 = STYLED_ITEM('color',(#523011),#279218); +#523011 = PRESENTATION_STYLE_ASSIGNMENT((#523012)); +#523012 = SURFACE_STYLE_USAGE(.BOTH.,#523013); +#523013 = SURFACE_SIDE_STYLE('',(#523014)); +#523014 = SURFACE_STYLE_FILL_AREA(#523015); +#523015 = FILL_AREA_STYLE('',(#523016)); +#523016 = FILL_AREA_STYLE_COLOUR('',#516784); +#523017 = STYLED_ITEM('color',(#523018),#279310); +#523018 = PRESENTATION_STYLE_ASSIGNMENT((#523019)); +#523019 = SURFACE_STYLE_USAGE(.BOTH.,#523020); +#523020 = SURFACE_SIDE_STYLE('',(#523021)); +#523021 = SURFACE_STYLE_FILL_AREA(#523022); +#523022 = FILL_AREA_STYLE('',(#523023)); +#523023 = FILL_AREA_STYLE_COLOUR('',#516784); +#523024 = STYLED_ITEM('color',(#523025),#279668); +#523025 = PRESENTATION_STYLE_ASSIGNMENT((#523026)); +#523026 = SURFACE_STYLE_USAGE(.BOTH.,#523027); +#523027 = SURFACE_SIDE_STYLE('',(#523028)); +#523028 = SURFACE_STYLE_FILL_AREA(#523029); +#523029 = FILL_AREA_STYLE('',(#523030)); +#523030 = FILL_AREA_STYLE_COLOUR('',#516784); +#523031 = STYLED_ITEM('color',(#523032),#280026); +#523032 = PRESENTATION_STYLE_ASSIGNMENT((#523033)); +#523033 = SURFACE_STYLE_USAGE(.BOTH.,#523034); +#523034 = SURFACE_SIDE_STYLE('',(#523035)); +#523035 = SURFACE_STYLE_FILL_AREA(#523036); +#523036 = FILL_AREA_STYLE('',(#523037)); +#523037 = FILL_AREA_STYLE_COLOUR('',#516784); +#523038 = STYLED_ITEM('color',(#523039),#280384); +#523039 = PRESENTATION_STYLE_ASSIGNMENT((#523040)); +#523040 = SURFACE_STYLE_USAGE(.BOTH.,#523041); +#523041 = SURFACE_SIDE_STYLE('',(#523042)); +#523042 = SURFACE_STYLE_FILL_AREA(#523043); +#523043 = FILL_AREA_STYLE('',(#523044)); +#523044 = FILL_AREA_STYLE_COLOUR('',#516784); +#523045 = STYLED_ITEM('color',(#523046),#281115); +#523046 = PRESENTATION_STYLE_ASSIGNMENT((#523047)); +#523047 = SURFACE_STYLE_USAGE(.BOTH.,#523048); +#523048 = SURFACE_SIDE_STYLE('',(#523049)); +#523049 = SURFACE_STYLE_FILL_AREA(#523050); +#523050 = FILL_AREA_STYLE('',(#523051)); +#523051 = FILL_AREA_STYLE_COLOUR('',#516784); +#523052 = STYLED_ITEM('color',(#523053),#281207); +#523053 = PRESENTATION_STYLE_ASSIGNMENT((#523054)); +#523054 = SURFACE_STYLE_USAGE(.BOTH.,#523055); +#523055 = SURFACE_SIDE_STYLE('',(#523056)); +#523056 = SURFACE_STYLE_FILL_AREA(#523057); +#523057 = FILL_AREA_STYLE('',(#523058)); +#523058 = FILL_AREA_STYLE_COLOUR('',#516784); +#523059 = STYLED_ITEM('color',(#523060),#281299); +#523060 = PRESENTATION_STYLE_ASSIGNMENT((#523061)); +#523061 = SURFACE_STYLE_USAGE(.BOTH.,#523062); +#523062 = SURFACE_SIDE_STYLE('',(#523063)); +#523063 = SURFACE_STYLE_FILL_AREA(#523064); +#523064 = FILL_AREA_STYLE('',(#523065)); +#523065 = FILL_AREA_STYLE_COLOUR('',#516784); +#523066 = STYLED_ITEM('color',(#523067),#281391); +#523067 = PRESENTATION_STYLE_ASSIGNMENT((#523068)); +#523068 = SURFACE_STYLE_USAGE(.BOTH.,#523069); +#523069 = SURFACE_SIDE_STYLE('',(#523070)); +#523070 = SURFACE_STYLE_FILL_AREA(#523071); +#523071 = FILL_AREA_STYLE('',(#523072)); +#523072 = FILL_AREA_STYLE_COLOUR('',#516784); +#523073 = STYLED_ITEM('color',(#523074),#281483); +#523074 = PRESENTATION_STYLE_ASSIGNMENT((#523075)); +#523075 = SURFACE_STYLE_USAGE(.BOTH.,#523076); +#523076 = SURFACE_SIDE_STYLE('',(#523077)); +#523077 = SURFACE_STYLE_FILL_AREA(#523078); +#523078 = FILL_AREA_STYLE('',(#523079)); +#523079 = FILL_AREA_STYLE_COLOUR('',#516784); +#523080 = STYLED_ITEM('color',(#523081),#281942); +#523081 = PRESENTATION_STYLE_ASSIGNMENT((#523082)); +#523082 = SURFACE_STYLE_USAGE(.BOTH.,#523083); +#523083 = SURFACE_SIDE_STYLE('',(#523084)); +#523084 = SURFACE_STYLE_FILL_AREA(#523085); +#523085 = FILL_AREA_STYLE('',(#523086)); +#523086 = FILL_AREA_STYLE_COLOUR('',#516784); +#523087 = STYLED_ITEM('color',(#523088),#282601); +#523088 = PRESENTATION_STYLE_ASSIGNMENT((#523089)); +#523089 = SURFACE_STYLE_USAGE(.BOTH.,#523090); +#523090 = SURFACE_SIDE_STYLE('',(#523091)); +#523091 = SURFACE_STYLE_FILL_AREA(#523092); +#523092 = FILL_AREA_STYLE('',(#523093)); +#523093 = FILL_AREA_STYLE_COLOUR('',#516784); +#523094 = STYLED_ITEM('color',(#523095),#282961); +#523095 = PRESENTATION_STYLE_ASSIGNMENT((#523096)); +#523096 = SURFACE_STYLE_USAGE(.BOTH.,#523097); +#523097 = SURFACE_SIDE_STYLE('',(#523098)); +#523098 = SURFACE_STYLE_FILL_AREA(#523099); +#523099 = FILL_AREA_STYLE('',(#523100)); +#523100 = FILL_AREA_STYLE_COLOUR('',#516784); +#523101 = STYLED_ITEM('color',(#523102),#283418); +#523102 = PRESENTATION_STYLE_ASSIGNMENT((#523103)); +#523103 = SURFACE_STYLE_USAGE(.BOTH.,#523104); +#523104 = SURFACE_SIDE_STYLE('',(#523105)); +#523105 = SURFACE_STYLE_FILL_AREA(#523106); +#523106 = FILL_AREA_STYLE('',(#523107)); +#523107 = FILL_AREA_STYLE_COLOUR('',#516784); +#523108 = STYLED_ITEM('color',(#523109),#283510); +#523109 = PRESENTATION_STYLE_ASSIGNMENT((#523110)); +#523110 = SURFACE_STYLE_USAGE(.BOTH.,#523111); +#523111 = SURFACE_SIDE_STYLE('',(#523112)); +#523112 = SURFACE_STYLE_FILL_AREA(#523113); +#523113 = FILL_AREA_STYLE('',(#523114)); +#523114 = FILL_AREA_STYLE_COLOUR('',#516784); +#523115 = STYLED_ITEM('color',(#523116),#284068); +#523116 = PRESENTATION_STYLE_ASSIGNMENT((#523117)); +#523117 = SURFACE_STYLE_USAGE(.BOTH.,#523118); +#523118 = SURFACE_SIDE_STYLE('',(#523119)); +#523119 = SURFACE_STYLE_FILL_AREA(#523120); +#523120 = FILL_AREA_STYLE('',(#523121)); +#523121 = FILL_AREA_STYLE_COLOUR('',#516784); +#523122 = STYLED_ITEM('color',(#523123),#284921); +#523123 = PRESENTATION_STYLE_ASSIGNMENT((#523124)); +#523124 = SURFACE_STYLE_USAGE(.BOTH.,#523125); +#523125 = SURFACE_SIDE_STYLE('',(#523126)); +#523126 = SURFACE_STYLE_FILL_AREA(#523127); +#523127 = FILL_AREA_STYLE('',(#523128)); +#523128 = FILL_AREA_STYLE_COLOUR('',#516784); +#523129 = STYLED_ITEM('color',(#523130),#285172); +#523130 = PRESENTATION_STYLE_ASSIGNMENT((#523131)); +#523131 = SURFACE_STYLE_USAGE(.BOTH.,#523132); +#523132 = SURFACE_SIDE_STYLE('',(#523133)); +#523133 = SURFACE_STYLE_FILL_AREA(#523134); +#523134 = FILL_AREA_STYLE('',(#523135)); +#523135 = FILL_AREA_STYLE_COLOUR('',#516784); +#523136 = STYLED_ITEM('color',(#523137),#285322); +#523137 = PRESENTATION_STYLE_ASSIGNMENT((#523138)); +#523138 = SURFACE_STYLE_USAGE(.BOTH.,#523139); +#523139 = SURFACE_SIDE_STYLE('',(#523140)); +#523140 = SURFACE_STYLE_FILL_AREA(#523141); +#523141 = FILL_AREA_STYLE('',(#523142)); +#523142 = FILL_AREA_STYLE_COLOUR('',#516784); +#523143 = STYLED_ITEM('color',(#523144),#285740); +#523144 = PRESENTATION_STYLE_ASSIGNMENT((#523145)); +#523145 = SURFACE_STYLE_USAGE(.BOTH.,#523146); +#523146 = SURFACE_SIDE_STYLE('',(#523147)); +#523147 = SURFACE_STYLE_FILL_AREA(#523148); +#523148 = FILL_AREA_STYLE('',(#523149)); +#523149 = FILL_AREA_STYLE_COLOUR('',#516784); +#523150 = STYLED_ITEM('color',(#523151),#285894); +#523151 = PRESENTATION_STYLE_ASSIGNMENT((#523152)); +#523152 = SURFACE_STYLE_USAGE(.BOTH.,#523153); +#523153 = SURFACE_SIDE_STYLE('',(#523154)); +#523154 = SURFACE_STYLE_FILL_AREA(#523155); +#523155 = FILL_AREA_STYLE('',(#523156)); +#523156 = FILL_AREA_STYLE_COLOUR('',#516784); +#523157 = STYLED_ITEM('color',(#523158),#285986); +#523158 = PRESENTATION_STYLE_ASSIGNMENT((#523159)); +#523159 = SURFACE_STYLE_USAGE(.BOTH.,#523160); +#523160 = SURFACE_SIDE_STYLE('',(#523161)); +#523161 = SURFACE_STYLE_FILL_AREA(#523162); +#523162 = FILL_AREA_STYLE('',(#523163)); +#523163 = FILL_AREA_STYLE_COLOUR('',#516784); +#523164 = STYLED_ITEM('color',(#523165),#286171); +#523165 = PRESENTATION_STYLE_ASSIGNMENT((#523166)); +#523166 = SURFACE_STYLE_USAGE(.BOTH.,#523167); +#523167 = SURFACE_SIDE_STYLE('',(#523168)); +#523168 = SURFACE_STYLE_FILL_AREA(#523169); +#523169 = FILL_AREA_STYLE('',(#523170)); +#523170 = FILL_AREA_STYLE_COLOUR('',#516784); +#523171 = STYLED_ITEM('color',(#523172),#286323); +#523172 = PRESENTATION_STYLE_ASSIGNMENT((#523173)); +#523173 = SURFACE_STYLE_USAGE(.BOTH.,#523174); +#523174 = SURFACE_SIDE_STYLE('',(#523175)); +#523175 = SURFACE_STYLE_FILL_AREA(#523176); +#523176 = FILL_AREA_STYLE('',(#523177)); +#523177 = FILL_AREA_STYLE_COLOUR('',#516784); +#523178 = STYLED_ITEM('color',(#523179),#286576); +#523179 = PRESENTATION_STYLE_ASSIGNMENT((#523180)); +#523180 = SURFACE_STYLE_USAGE(.BOTH.,#523181); +#523181 = SURFACE_SIDE_STYLE('',(#523182)); +#523182 = SURFACE_STYLE_FILL_AREA(#523183); +#523183 = FILL_AREA_STYLE('',(#523184)); +#523184 = FILL_AREA_STYLE_COLOUR('',#516784); +#523185 = STYLED_ITEM('color',(#523186),#286936); +#523186 = PRESENTATION_STYLE_ASSIGNMENT((#523187)); +#523187 = SURFACE_STYLE_USAGE(.BOTH.,#523188); +#523188 = SURFACE_SIDE_STYLE('',(#523189)); +#523189 = SURFACE_STYLE_FILL_AREA(#523190); +#523190 = FILL_AREA_STYLE('',(#523191)); +#523191 = FILL_AREA_STYLE_COLOUR('',#516784); +#523192 = STYLED_ITEM('color',(#523193),#287294); +#523193 = PRESENTATION_STYLE_ASSIGNMENT((#523194)); +#523194 = SURFACE_STYLE_USAGE(.BOTH.,#523195); +#523195 = SURFACE_SIDE_STYLE('',(#523196)); +#523196 = SURFACE_STYLE_FILL_AREA(#523197); +#523197 = FILL_AREA_STYLE('',(#523198)); +#523198 = FILL_AREA_STYLE_COLOUR('',#516784); +#523199 = STYLED_ITEM('color',(#523200),#287918); +#523200 = PRESENTATION_STYLE_ASSIGNMENT((#523201)); +#523201 = SURFACE_STYLE_USAGE(.BOTH.,#523202); +#523202 = SURFACE_SIDE_STYLE('',(#523203)); +#523203 = SURFACE_STYLE_FILL_AREA(#523204); +#523204 = FILL_AREA_STYLE('',(#523205)); +#523205 = FILL_AREA_STYLE_COLOUR('',#516784); +#523206 = STYLED_ITEM('color',(#523207),#289569); +#523207 = PRESENTATION_STYLE_ASSIGNMENT((#523208)); +#523208 = SURFACE_STYLE_USAGE(.BOTH.,#523209); +#523209 = SURFACE_SIDE_STYLE('',(#523210)); +#523210 = SURFACE_STYLE_FILL_AREA(#523211); +#523211 = FILL_AREA_STYLE('',(#523212)); +#523212 = FILL_AREA_STYLE_COLOUR('',#516784); +#523213 = STYLED_ITEM('color',(#523214),#289661); +#523214 = PRESENTATION_STYLE_ASSIGNMENT((#523215)); +#523215 = SURFACE_STYLE_USAGE(.BOTH.,#523216); +#523216 = SURFACE_SIDE_STYLE('',(#523217)); +#523217 = SURFACE_STYLE_FILL_AREA(#523218); +#523218 = FILL_AREA_STYLE('',(#523219)); +#523219 = FILL_AREA_STYLE_COLOUR('',#516784); +#523220 = STYLED_ITEM('color',(#523221),#289753); +#523221 = PRESENTATION_STYLE_ASSIGNMENT((#523222)); +#523222 = SURFACE_STYLE_USAGE(.BOTH.,#523223); +#523223 = SURFACE_SIDE_STYLE('',(#523224)); +#523224 = SURFACE_STYLE_FILL_AREA(#523225); +#523225 = FILL_AREA_STYLE('',(#523226)); +#523226 = FILL_AREA_STYLE_COLOUR('',#516784); +#523227 = STYLED_ITEM('color',(#523228),#290012); +#523228 = PRESENTATION_STYLE_ASSIGNMENT((#523229)); +#523229 = SURFACE_STYLE_USAGE(.BOTH.,#523230); +#523230 = SURFACE_SIDE_STYLE('',(#523231)); +#523231 = SURFACE_STYLE_FILL_AREA(#523232); +#523232 = FILL_AREA_STYLE('',(#523233)); +#523233 = FILL_AREA_STYLE_COLOUR('',#516784); +#523234 = STYLED_ITEM('color',(#523235),#290271); +#523235 = PRESENTATION_STYLE_ASSIGNMENT((#523236)); +#523236 = SURFACE_STYLE_USAGE(.BOTH.,#523237); +#523237 = SURFACE_SIDE_STYLE('',(#523238)); +#523238 = SURFACE_STYLE_FILL_AREA(#523239); +#523239 = FILL_AREA_STYLE('',(#523240)); +#523240 = FILL_AREA_STYLE_COLOUR('',#516784); +#523241 = STYLED_ITEM('color',(#523242),#290530); +#523242 = PRESENTATION_STYLE_ASSIGNMENT((#523243)); +#523243 = SURFACE_STYLE_USAGE(.BOTH.,#523244); +#523244 = SURFACE_SIDE_STYLE('',(#523245)); +#523245 = SURFACE_STYLE_FILL_AREA(#523246); +#523246 = FILL_AREA_STYLE('',(#523247)); +#523247 = FILL_AREA_STYLE_COLOUR('',#516784); +#523248 = STYLED_ITEM('color',(#523249),#290622); +#523249 = PRESENTATION_STYLE_ASSIGNMENT((#523250)); +#523250 = SURFACE_STYLE_USAGE(.BOTH.,#523251); +#523251 = SURFACE_SIDE_STYLE('',(#523252)); +#523252 = SURFACE_STYLE_FILL_AREA(#523253); +#523253 = FILL_AREA_STYLE('',(#523254)); +#523254 = FILL_AREA_STYLE_COLOUR('',#516784); +#523255 = STYLED_ITEM('color',(#523256),#290714); +#523256 = PRESENTATION_STYLE_ASSIGNMENT((#523257)); +#523257 = SURFACE_STYLE_USAGE(.BOTH.,#523258); +#523258 = SURFACE_SIDE_STYLE('',(#523259)); +#523259 = SURFACE_STYLE_FILL_AREA(#523260); +#523260 = FILL_AREA_STYLE('',(#523261)); +#523261 = FILL_AREA_STYLE_COLOUR('',#516784); +#523262 = STYLED_ITEM('color',(#523263),#290806); +#523263 = PRESENTATION_STYLE_ASSIGNMENT((#523264)); +#523264 = SURFACE_STYLE_USAGE(.BOTH.,#523265); +#523265 = SURFACE_SIDE_STYLE('',(#523266)); +#523266 = SURFACE_STYLE_FILL_AREA(#523267); +#523267 = FILL_AREA_STYLE('',(#523268)); +#523268 = FILL_AREA_STYLE_COLOUR('',#516784); +#523269 = STYLED_ITEM('color',(#523270),#290898); +#523270 = PRESENTATION_STYLE_ASSIGNMENT((#523271)); +#523271 = SURFACE_STYLE_USAGE(.BOTH.,#523272); +#523272 = SURFACE_SIDE_STYLE('',(#523273)); +#523273 = SURFACE_STYLE_FILL_AREA(#523274); +#523274 = FILL_AREA_STYLE('',(#523275)); +#523275 = FILL_AREA_STYLE_COLOUR('',#516784); +#523276 = STYLED_ITEM('color',(#523277),#290990); +#523277 = PRESENTATION_STYLE_ASSIGNMENT((#523278)); +#523278 = SURFACE_STYLE_USAGE(.BOTH.,#523279); +#523279 = SURFACE_SIDE_STYLE('',(#523280)); +#523280 = SURFACE_STYLE_FILL_AREA(#523281); +#523281 = FILL_AREA_STYLE('',(#523282)); +#523282 = FILL_AREA_STYLE_COLOUR('',#516784); +#523283 = STYLED_ITEM('color',(#523284),#291082); +#523284 = PRESENTATION_STYLE_ASSIGNMENT((#523285)); +#523285 = SURFACE_STYLE_USAGE(.BOTH.,#523286); +#523286 = SURFACE_SIDE_STYLE('',(#523287)); +#523287 = SURFACE_STYLE_FILL_AREA(#523288); +#523288 = FILL_AREA_STYLE('',(#523289)); +#523289 = FILL_AREA_STYLE_COLOUR('',#516784); +#523290 = STYLED_ITEM('color',(#523291),#291174); +#523291 = PRESENTATION_STYLE_ASSIGNMENT((#523292)); +#523292 = SURFACE_STYLE_USAGE(.BOTH.,#523293); +#523293 = SURFACE_SIDE_STYLE('',(#523294)); +#523294 = SURFACE_STYLE_FILL_AREA(#523295); +#523295 = FILL_AREA_STYLE('',(#523296)); +#523296 = FILL_AREA_STYLE_COLOUR('',#516784); +#523297 = STYLED_ITEM('color',(#523298),#291266); +#523298 = PRESENTATION_STYLE_ASSIGNMENT((#523299)); +#523299 = SURFACE_STYLE_USAGE(.BOTH.,#523300); +#523300 = SURFACE_SIDE_STYLE('',(#523301)); +#523301 = SURFACE_STYLE_FILL_AREA(#523302); +#523302 = FILL_AREA_STYLE('',(#523303)); +#523303 = FILL_AREA_STYLE_COLOUR('',#516784); +#523304 = STYLED_ITEM('color',(#523305),#291358); +#523305 = PRESENTATION_STYLE_ASSIGNMENT((#523306)); +#523306 = SURFACE_STYLE_USAGE(.BOTH.,#523307); +#523307 = SURFACE_SIDE_STYLE('',(#523308)); +#523308 = SURFACE_STYLE_FILL_AREA(#523309); +#523309 = FILL_AREA_STYLE('',(#523310)); +#523310 = FILL_AREA_STYLE_COLOUR('',#516784); +#523311 = STYLED_ITEM('color',(#523312),#291450); +#523312 = PRESENTATION_STYLE_ASSIGNMENT((#523313)); +#523313 = SURFACE_STYLE_USAGE(.BOTH.,#523314); +#523314 = SURFACE_SIDE_STYLE('',(#523315)); +#523315 = SURFACE_STYLE_FILL_AREA(#523316); +#523316 = FILL_AREA_STYLE('',(#523317)); +#523317 = FILL_AREA_STYLE_COLOUR('',#516784); +#523318 = STYLED_ITEM('color',(#523319),#291709); +#523319 = PRESENTATION_STYLE_ASSIGNMENT((#523320)); +#523320 = SURFACE_STYLE_USAGE(.BOTH.,#523321); +#523321 = SURFACE_SIDE_STYLE('',(#523322)); +#523322 = SURFACE_STYLE_FILL_AREA(#523323); +#523323 = FILL_AREA_STYLE('',(#523324)); +#523324 = FILL_AREA_STYLE_COLOUR('',#516784); +#523325 = STYLED_ITEM('color',(#523326),#291968); +#523326 = PRESENTATION_STYLE_ASSIGNMENT((#523327)); +#523327 = SURFACE_STYLE_USAGE(.BOTH.,#523328); +#523328 = SURFACE_SIDE_STYLE('',(#523329)); +#523329 = SURFACE_STYLE_FILL_AREA(#523330); +#523330 = FILL_AREA_STYLE('',(#523331)); +#523331 = FILL_AREA_STYLE_COLOUR('',#516784); +#523332 = STYLED_ITEM('color',(#523333),#292425); +#523333 = PRESENTATION_STYLE_ASSIGNMENT((#523334)); +#523334 = SURFACE_STYLE_USAGE(.BOTH.,#523335); +#523335 = SURFACE_SIDE_STYLE('',(#523336)); +#523336 = SURFACE_STYLE_FILL_AREA(#523337); +#523337 = FILL_AREA_STYLE('',(#523338)); +#523338 = FILL_AREA_STYLE_COLOUR('',#516784); +#523339 = STYLED_ITEM('color',(#523340),#292517); +#523340 = PRESENTATION_STYLE_ASSIGNMENT((#523341)); +#523341 = SURFACE_STYLE_USAGE(.BOTH.,#523342); +#523342 = SURFACE_SIDE_STYLE('',(#523343)); +#523343 = SURFACE_STYLE_FILL_AREA(#523344); +#523344 = FILL_AREA_STYLE('',(#523345)); +#523345 = FILL_AREA_STYLE_COLOUR('',#516784); +#523346 = STYLED_ITEM('color',(#523347),#292609); +#523347 = PRESENTATION_STYLE_ASSIGNMENT((#523348)); +#523348 = SURFACE_STYLE_USAGE(.BOTH.,#523349); +#523349 = SURFACE_SIDE_STYLE('',(#523350)); +#523350 = SURFACE_STYLE_FILL_AREA(#523351); +#523351 = FILL_AREA_STYLE('',(#523352)); +#523352 = FILL_AREA_STYLE_COLOUR('',#516784); +#523353 = STYLED_ITEM('color',(#523354),#293064); +#523354 = PRESENTATION_STYLE_ASSIGNMENT((#523355)); +#523355 = SURFACE_STYLE_USAGE(.BOTH.,#523356); +#523356 = SURFACE_SIDE_STYLE('',(#523357)); +#523357 = SURFACE_STYLE_FILL_AREA(#523358); +#523358 = FILL_AREA_STYLE('',(#523359)); +#523359 = FILL_AREA_STYLE_COLOUR('',#516784); +#523360 = STYLED_ITEM('color',(#523361),#293323); +#523361 = PRESENTATION_STYLE_ASSIGNMENT((#523362)); +#523362 = SURFACE_STYLE_USAGE(.BOTH.,#523363); +#523363 = SURFACE_SIDE_STYLE('',(#523364)); +#523364 = SURFACE_STYLE_FILL_AREA(#523365); +#523365 = FILL_AREA_STYLE('',(#523366)); +#523366 = FILL_AREA_STYLE_COLOUR('',#516784); +#523367 = STYLED_ITEM('color',(#523368),#293582); +#523368 = PRESENTATION_STYLE_ASSIGNMENT((#523369)); +#523369 = SURFACE_STYLE_USAGE(.BOTH.,#523370); +#523370 = SURFACE_SIDE_STYLE('',(#523371)); +#523371 = SURFACE_STYLE_FILL_AREA(#523372); +#523372 = FILL_AREA_STYLE('',(#523373)); +#523373 = FILL_AREA_STYLE_COLOUR('',#516784); +#523374 = STYLED_ITEM('color',(#523375),#294208); +#523375 = PRESENTATION_STYLE_ASSIGNMENT((#523376)); +#523376 = SURFACE_STYLE_USAGE(.BOTH.,#523377); +#523377 = SURFACE_SIDE_STYLE('',(#523378)); +#523378 = SURFACE_STYLE_FILL_AREA(#523379); +#523379 = FILL_AREA_STYLE('',(#523380)); +#523380 = FILL_AREA_STYLE_COLOUR('',#516784); +#523381 = STYLED_ITEM('color',(#523382),#294434); +#523382 = PRESENTATION_STYLE_ASSIGNMENT((#523383)); +#523383 = SURFACE_STYLE_USAGE(.BOTH.,#523384); +#523384 = SURFACE_SIDE_STYLE('',(#523385)); +#523385 = SURFACE_STYLE_FILL_AREA(#523386); +#523386 = FILL_AREA_STYLE('',(#523387)); +#523387 = FILL_AREA_STYLE_COLOUR('',#516784); +#523388 = STYLED_ITEM('color',(#523389),#294693); +#523389 = PRESENTATION_STYLE_ASSIGNMENT((#523390)); +#523390 = SURFACE_STYLE_USAGE(.BOTH.,#523391); +#523391 = SURFACE_SIDE_STYLE('',(#523392)); +#523392 = SURFACE_STYLE_FILL_AREA(#523393); +#523393 = FILL_AREA_STYLE('',(#523394)); +#523394 = FILL_AREA_STYLE_COLOUR('',#516784); +#523395 = STYLED_ITEM('color',(#523396),#295447); +#523396 = PRESENTATION_STYLE_ASSIGNMENT((#523397)); +#523397 = SURFACE_STYLE_USAGE(.BOTH.,#523398); +#523398 = SURFACE_SIDE_STYLE('',(#523399)); +#523399 = SURFACE_STYLE_FILL_AREA(#523400); +#523400 = FILL_AREA_STYLE('',(#523401)); +#523401 = FILL_AREA_STYLE_COLOUR('',#516784); +#523402 = STYLED_ITEM('color',(#523403),#295902); +#523403 = PRESENTATION_STYLE_ASSIGNMENT((#523404)); +#523404 = SURFACE_STYLE_USAGE(.BOTH.,#523405); +#523405 = SURFACE_SIDE_STYLE('',(#523406)); +#523406 = SURFACE_STYLE_FILL_AREA(#523407); +#523407 = FILL_AREA_STYLE('',(#523408)); +#523408 = FILL_AREA_STYLE_COLOUR('',#516784); +#523409 = STYLED_ITEM('color',(#523410),#295994); +#523410 = PRESENTATION_STYLE_ASSIGNMENT((#523411)); +#523411 = SURFACE_STYLE_USAGE(.BOTH.,#523412); +#523412 = SURFACE_SIDE_STYLE('',(#523413)); +#523413 = SURFACE_STYLE_FILL_AREA(#523414); +#523414 = FILL_AREA_STYLE('',(#523415)); +#523415 = FILL_AREA_STYLE_COLOUR('',#516784); +#523416 = STYLED_ITEM('color',(#523417),#296086); +#523417 = PRESENTATION_STYLE_ASSIGNMENT((#523418)); +#523418 = SURFACE_STYLE_USAGE(.BOTH.,#523419); +#523419 = SURFACE_SIDE_STYLE('',(#523420)); +#523420 = SURFACE_STYLE_FILL_AREA(#523421); +#523421 = FILL_AREA_STYLE('',(#523422)); +#523422 = FILL_AREA_STYLE_COLOUR('',#516784); +#523423 = STYLED_ITEM('color',(#523424),#296178); +#523424 = PRESENTATION_STYLE_ASSIGNMENT((#523425)); +#523425 = SURFACE_STYLE_USAGE(.BOTH.,#523426); +#523426 = SURFACE_SIDE_STYLE('',(#523427)); +#523427 = SURFACE_STYLE_FILL_AREA(#523428); +#523428 = FILL_AREA_STYLE('',(#523429)); +#523429 = FILL_AREA_STYLE_COLOUR('',#516784); +#523430 = STYLED_ITEM('color',(#523431),#297039); +#523431 = PRESENTATION_STYLE_ASSIGNMENT((#523432)); +#523432 = SURFACE_STYLE_USAGE(.BOTH.,#523433); +#523433 = SURFACE_SIDE_STYLE('',(#523434)); +#523434 = SURFACE_STYLE_FILL_AREA(#523435); +#523435 = FILL_AREA_STYLE('',(#523436)); +#523436 = FILL_AREA_STYLE_COLOUR('',#516784); +#523437 = STYLED_ITEM('color',(#523438),#298096); +#523438 = PRESENTATION_STYLE_ASSIGNMENT((#523439)); +#523439 = SURFACE_STYLE_USAGE(.BOTH.,#523440); +#523440 = SURFACE_SIDE_STYLE('',(#523441)); +#523441 = SURFACE_STYLE_FILL_AREA(#523442); +#523442 = FILL_AREA_STYLE('',(#523443)); +#523443 = FILL_AREA_STYLE_COLOUR('',#516784); +#523444 = STYLED_ITEM('color',(#523445),#298718); +#523445 = PRESENTATION_STYLE_ASSIGNMENT((#523446)); +#523446 = SURFACE_STYLE_USAGE(.BOTH.,#523447); +#523447 = SURFACE_SIDE_STYLE('',(#523448)); +#523448 = SURFACE_STYLE_FILL_AREA(#523449); +#523449 = FILL_AREA_STYLE('',(#523450)); +#523450 = FILL_AREA_STYLE_COLOUR('',#516784); +#523451 = STYLED_ITEM('color',(#523452),#299274); +#523452 = PRESENTATION_STYLE_ASSIGNMENT((#523453)); +#523453 = SURFACE_STYLE_USAGE(.BOTH.,#523454); +#523454 = SURFACE_SIDE_STYLE('',(#523455)); +#523455 = SURFACE_STYLE_FILL_AREA(#523456); +#523456 = FILL_AREA_STYLE('',(#523457)); +#523457 = FILL_AREA_STYLE_COLOUR('',#516784); +#523458 = STYLED_ITEM('color',(#523459),#299634); +#523459 = PRESENTATION_STYLE_ASSIGNMENT((#523460)); +#523460 = SURFACE_STYLE_USAGE(.BOTH.,#523461); +#523461 = SURFACE_SIDE_STYLE('',(#523462)); +#523462 = SURFACE_STYLE_FILL_AREA(#523463); +#523463 = FILL_AREA_STYLE('',(#523464)); +#523464 = FILL_AREA_STYLE_COLOUR('',#516784); +#523465 = STYLED_ITEM('color',(#523466),#299990); +#523466 = PRESENTATION_STYLE_ASSIGNMENT((#523467)); +#523467 = SURFACE_STYLE_USAGE(.BOTH.,#523468); +#523468 = SURFACE_SIDE_STYLE('',(#523469)); +#523469 = SURFACE_STYLE_FILL_AREA(#523470); +#523470 = FILL_AREA_STYLE('',(#523471)); +#523471 = FILL_AREA_STYLE_COLOUR('',#516784); +#523472 = STYLED_ITEM('color',(#523473),#300082); +#523473 = PRESENTATION_STYLE_ASSIGNMENT((#523474)); +#523474 = SURFACE_STYLE_USAGE(.BOTH.,#523475); +#523475 = SURFACE_SIDE_STYLE('',(#523476)); +#523476 = SURFACE_STYLE_FILL_AREA(#523477); +#523477 = FILL_AREA_STYLE('',(#523478)); +#523478 = FILL_AREA_STYLE_COLOUR('',#516784); +#523479 = STYLED_ITEM('color',(#523480),#300174); +#523480 = PRESENTATION_STYLE_ASSIGNMENT((#523481)); +#523481 = SURFACE_STYLE_USAGE(.BOTH.,#523482); +#523482 = SURFACE_SIDE_STYLE('',(#523483)); +#523483 = SURFACE_STYLE_FILL_AREA(#523484); +#523484 = FILL_AREA_STYLE('',(#523485)); +#523485 = FILL_AREA_STYLE_COLOUR('',#516784); +#523486 = STYLED_ITEM('color',(#523487),#300266); +#523487 = PRESENTATION_STYLE_ASSIGNMENT((#523488)); +#523488 = SURFACE_STYLE_USAGE(.BOTH.,#523489); +#523489 = SURFACE_SIDE_STYLE('',(#523490)); +#523490 = SURFACE_STYLE_FILL_AREA(#523491); +#523491 = FILL_AREA_STYLE('',(#523492)); +#523492 = FILL_AREA_STYLE_COLOUR('',#516784); +#523493 = STYLED_ITEM('color',(#523494),#300758); +#523494 = PRESENTATION_STYLE_ASSIGNMENT((#523495)); +#523495 = SURFACE_STYLE_USAGE(.BOTH.,#523496); +#523496 = SURFACE_SIDE_STYLE('',(#523497)); +#523497 = SURFACE_STYLE_FILL_AREA(#523498); +#523498 = FILL_AREA_STYLE('',(#523499)); +#523499 = FILL_AREA_STYLE_COLOUR('',#516784); +#523500 = STYLED_ITEM('color',(#523501),#301184); +#523501 = PRESENTATION_STYLE_ASSIGNMENT((#523502)); +#523502 = SURFACE_STYLE_USAGE(.BOTH.,#523503); +#523503 = SURFACE_SIDE_STYLE('',(#523504)); +#523504 = SURFACE_STYLE_FILL_AREA(#523505); +#523505 = FILL_AREA_STYLE('',(#523506)); +#523506 = FILL_AREA_STYLE_COLOUR('',#516784); +#523507 = STYLED_ITEM('color',(#523508),#301276); +#523508 = PRESENTATION_STYLE_ASSIGNMENT((#523509)); +#523509 = SURFACE_STYLE_USAGE(.BOTH.,#523510); +#523510 = SURFACE_SIDE_STYLE('',(#523511)); +#523511 = SURFACE_STYLE_FILL_AREA(#523512); +#523512 = FILL_AREA_STYLE('',(#523513)); +#523513 = FILL_AREA_STYLE_COLOUR('',#516784); +#523514 = STYLED_ITEM('color',(#523515),#301368); +#523515 = PRESENTATION_STYLE_ASSIGNMENT((#523516)); +#523516 = SURFACE_STYLE_USAGE(.BOTH.,#523517); +#523517 = SURFACE_SIDE_STYLE('',(#523518)); +#523518 = SURFACE_STYLE_FILL_AREA(#523519); +#523519 = FILL_AREA_STYLE('',(#523520)); +#523520 = FILL_AREA_STYLE_COLOUR('',#516784); +#523521 = STYLED_ITEM('color',(#523522),#301460); +#523522 = PRESENTATION_STYLE_ASSIGNMENT((#523523)); +#523523 = SURFACE_STYLE_USAGE(.BOTH.,#523524); +#523524 = SURFACE_SIDE_STYLE('',(#523525)); +#523525 = SURFACE_STYLE_FILL_AREA(#523526); +#523526 = FILL_AREA_STYLE('',(#523527)); +#523527 = FILL_AREA_STYLE_COLOUR('',#516784); +#523528 = STYLED_ITEM('color',(#523529),#302387); +#523529 = PRESENTATION_STYLE_ASSIGNMENT((#523530)); +#523530 = SURFACE_STYLE_USAGE(.BOTH.,#523531); +#523531 = SURFACE_SIDE_STYLE('',(#523532)); +#523532 = SURFACE_STYLE_FILL_AREA(#523533); +#523533 = FILL_AREA_STYLE('',(#523534)); +#523534 = FILL_AREA_STYLE_COLOUR('',#516784); +#523535 = STYLED_ITEM('color',(#523536),#302745); +#523536 = PRESENTATION_STYLE_ASSIGNMENT((#523537)); +#523537 = SURFACE_STYLE_USAGE(.BOTH.,#523538); +#523538 = SURFACE_SIDE_STYLE('',(#523539)); +#523539 = SURFACE_STYLE_FILL_AREA(#523540); +#523540 = FILL_AREA_STYLE('',(#523541)); +#523541 = FILL_AREA_STYLE_COLOUR('',#516784); +#523542 = STYLED_ITEM('color',(#523543),#303305); +#523543 = PRESENTATION_STYLE_ASSIGNMENT((#523544)); +#523544 = SURFACE_STYLE_USAGE(.BOTH.,#523545); +#523545 = SURFACE_SIDE_STYLE('',(#523546)); +#523546 = SURFACE_STYLE_FILL_AREA(#523547); +#523547 = FILL_AREA_STYLE('',(#523548)); +#523548 = FILL_AREA_STYLE_COLOUR('',#516784); +#523549 = STYLED_ITEM('color',(#523550),#303865); +#523550 = PRESENTATION_STYLE_ASSIGNMENT((#523551)); +#523551 = SURFACE_STYLE_USAGE(.BOTH.,#523552); +#523552 = SURFACE_SIDE_STYLE('',(#523553)); +#523553 = SURFACE_STYLE_FILL_AREA(#523554); +#523554 = FILL_AREA_STYLE('',(#523555)); +#523555 = FILL_AREA_STYLE_COLOUR('',#516784); +#523556 = STYLED_ITEM('color',(#523557),#304124); +#523557 = PRESENTATION_STYLE_ASSIGNMENT((#523558)); +#523558 = SURFACE_STYLE_USAGE(.BOTH.,#523559); +#523559 = SURFACE_SIDE_STYLE('',(#523560)); +#523560 = SURFACE_STYLE_FILL_AREA(#523561); +#523561 = FILL_AREA_STYLE('',(#523562)); +#523562 = FILL_AREA_STYLE_COLOUR('',#516784); +#523563 = STYLED_ITEM('color',(#523564),#304482); +#523564 = PRESENTATION_STYLE_ASSIGNMENT((#523565)); +#523565 = SURFACE_STYLE_USAGE(.BOTH.,#523566); +#523566 = SURFACE_SIDE_STYLE('',(#523567)); +#523567 = SURFACE_STYLE_FILL_AREA(#523568); +#523568 = FILL_AREA_STYLE('',(#523569)); +#523569 = FILL_AREA_STYLE_COLOUR('',#516784); +#523570 = STYLED_ITEM('color',(#523571),#304906); +#523571 = PRESENTATION_STYLE_ASSIGNMENT((#523572)); +#523572 = SURFACE_STYLE_USAGE(.BOTH.,#523573); +#523573 = SURFACE_SIDE_STYLE('',(#523574)); +#523574 = SURFACE_STYLE_FILL_AREA(#523575); +#523575 = FILL_AREA_STYLE('',(#523576)); +#523576 = FILL_AREA_STYLE_COLOUR('',#516784); +#523577 = STYLED_ITEM('color',(#523578),#305165); +#523578 = PRESENTATION_STYLE_ASSIGNMENT((#523579)); +#523579 = SURFACE_STYLE_USAGE(.BOTH.,#523580); +#523580 = SURFACE_SIDE_STYLE('',(#523581)); +#523581 = SURFACE_STYLE_FILL_AREA(#523582); +#523582 = FILL_AREA_STYLE('',(#523583)); +#523583 = FILL_AREA_STYLE_COLOUR('',#516784); +#523584 = STYLED_ITEM('color',(#523585),#305523); +#523585 = PRESENTATION_STYLE_ASSIGNMENT((#523586)); +#523586 = SURFACE_STYLE_USAGE(.BOTH.,#523587); +#523587 = SURFACE_SIDE_STYLE('',(#523588)); +#523588 = SURFACE_STYLE_FILL_AREA(#523589); +#523589 = FILL_AREA_STYLE('',(#523590)); +#523590 = FILL_AREA_STYLE_COLOUR('',#516784); +#523591 = STYLED_ITEM('color',(#523592),#305881); +#523592 = PRESENTATION_STYLE_ASSIGNMENT((#523593)); +#523593 = SURFACE_STYLE_USAGE(.BOTH.,#523594); +#523594 = SURFACE_SIDE_STYLE('',(#523595)); +#523595 = SURFACE_STYLE_FILL_AREA(#523596); +#523596 = FILL_AREA_STYLE('',(#523597)); +#523597 = FILL_AREA_STYLE_COLOUR('',#516784); +#523598 = STYLED_ITEM('color',(#523599),#305973); +#523599 = PRESENTATION_STYLE_ASSIGNMENT((#523600)); +#523600 = SURFACE_STYLE_USAGE(.BOTH.,#523601); +#523601 = SURFACE_SIDE_STYLE('',(#523602)); +#523602 = SURFACE_STYLE_FILL_AREA(#523603); +#523603 = FILL_AREA_STYLE('',(#523604)); +#523604 = FILL_AREA_STYLE_COLOUR('',#516784); +#523605 = STYLED_ITEM('color',(#523606),#306397); +#523606 = PRESENTATION_STYLE_ASSIGNMENT((#523607)); +#523607 = SURFACE_STYLE_USAGE(.BOTH.,#523608); +#523608 = SURFACE_SIDE_STYLE('',(#523609)); +#523609 = SURFACE_STYLE_FILL_AREA(#523610); +#523610 = FILL_AREA_STYLE('',(#523611)); +#523611 = FILL_AREA_STYLE_COLOUR('',#516784); +#523612 = STYLED_ITEM('color',(#523613),#306821); +#523613 = PRESENTATION_STYLE_ASSIGNMENT((#523614)); +#523614 = SURFACE_STYLE_USAGE(.BOTH.,#523615); +#523615 = SURFACE_SIDE_STYLE('',(#523616)); +#523616 = SURFACE_STYLE_FILL_AREA(#523617); +#523617 = FILL_AREA_STYLE('',(#523618)); +#523618 = FILL_AREA_STYLE_COLOUR('',#516784); +#523619 = STYLED_ITEM('color',(#523620),#307080); +#523620 = PRESENTATION_STYLE_ASSIGNMENT((#523621)); +#523621 = SURFACE_STYLE_USAGE(.BOTH.,#523622); +#523622 = SURFACE_SIDE_STYLE('',(#523623)); +#523623 = SURFACE_STYLE_FILL_AREA(#523624); +#523624 = FILL_AREA_STYLE('',(#523625)); +#523625 = FILL_AREA_STYLE_COLOUR('',#516784); +#523626 = STYLED_ITEM('color',(#523627),#307172); +#523627 = PRESENTATION_STYLE_ASSIGNMENT((#523628)); +#523628 = SURFACE_STYLE_USAGE(.BOTH.,#523629); +#523629 = SURFACE_SIDE_STYLE('',(#523630)); +#523630 = SURFACE_STYLE_FILL_AREA(#523631); +#523631 = FILL_AREA_STYLE('',(#523632)); +#523632 = FILL_AREA_STYLE_COLOUR('',#516784); +#523633 = STYLED_ITEM('color',(#523634),#307264); +#523634 = PRESENTATION_STYLE_ASSIGNMENT((#523635)); +#523635 = SURFACE_STYLE_USAGE(.BOTH.,#523636); +#523636 = SURFACE_SIDE_STYLE('',(#523637)); +#523637 = SURFACE_STYLE_FILL_AREA(#523638); +#523638 = FILL_AREA_STYLE('',(#523639)); +#523639 = FILL_AREA_STYLE_COLOUR('',#516784); +#523640 = STYLED_ITEM('color',(#523641),#307356); +#523641 = PRESENTATION_STYLE_ASSIGNMENT((#523642)); +#523642 = SURFACE_STYLE_USAGE(.BOTH.,#523643); +#523643 = SURFACE_SIDE_STYLE('',(#523644)); +#523644 = SURFACE_STYLE_FILL_AREA(#523645); +#523645 = FILL_AREA_STYLE('',(#523646)); +#523646 = FILL_AREA_STYLE_COLOUR('',#516784); +#523647 = STYLED_ITEM('color',(#523648),#307448); +#523648 = PRESENTATION_STYLE_ASSIGNMENT((#523649)); +#523649 = SURFACE_STYLE_USAGE(.BOTH.,#523650); +#523650 = SURFACE_SIDE_STYLE('',(#523651)); +#523651 = SURFACE_STYLE_FILL_AREA(#523652); +#523652 = FILL_AREA_STYLE('',(#523653)); +#523653 = FILL_AREA_STYLE_COLOUR('',#516784); +#523654 = STYLED_ITEM('color',(#523655),#307540); +#523655 = PRESENTATION_STYLE_ASSIGNMENT((#523656)); +#523656 = SURFACE_STYLE_USAGE(.BOTH.,#523657); +#523657 = SURFACE_SIDE_STYLE('',(#523658)); +#523658 = SURFACE_STYLE_FILL_AREA(#523659); +#523659 = FILL_AREA_STYLE('',(#523660)); +#523660 = FILL_AREA_STYLE_COLOUR('',#516784); +#523661 = STYLED_ITEM('color',(#523662),#307632); +#523662 = PRESENTATION_STYLE_ASSIGNMENT((#523663)); +#523663 = SURFACE_STYLE_USAGE(.BOTH.,#523664); +#523664 = SURFACE_SIDE_STYLE('',(#523665)); +#523665 = SURFACE_STYLE_FILL_AREA(#523666); +#523666 = FILL_AREA_STYLE('',(#523667)); +#523667 = FILL_AREA_STYLE_COLOUR('',#516784); +#523668 = STYLED_ITEM('color',(#523669),#307724); +#523669 = PRESENTATION_STYLE_ASSIGNMENT((#523670)); +#523670 = SURFACE_STYLE_USAGE(.BOTH.,#523671); +#523671 = SURFACE_SIDE_STYLE('',(#523672)); +#523672 = SURFACE_STYLE_FILL_AREA(#523673); +#523673 = FILL_AREA_STYLE('',(#523674)); +#523674 = FILL_AREA_STYLE_COLOUR('',#516784); +#523675 = STYLED_ITEM('color',(#523676),#307816); +#523676 = PRESENTATION_STYLE_ASSIGNMENT((#523677)); +#523677 = SURFACE_STYLE_USAGE(.BOTH.,#523678); +#523678 = SURFACE_SIDE_STYLE('',(#523679)); +#523679 = SURFACE_STYLE_FILL_AREA(#523680); +#523680 = FILL_AREA_STYLE('',(#523681)); +#523681 = FILL_AREA_STYLE_COLOUR('',#516784); +#523682 = STYLED_ITEM('color',(#523683),#308277); +#523683 = PRESENTATION_STYLE_ASSIGNMENT((#523684)); +#523684 = SURFACE_STYLE_USAGE(.BOTH.,#523685); +#523685 = SURFACE_SIDE_STYLE('',(#523686)); +#523686 = SURFACE_STYLE_FILL_AREA(#523687); +#523687 = FILL_AREA_STYLE('',(#523688)); +#523688 = FILL_AREA_STYLE_COLOUR('',#516784); +#523689 = STYLED_ITEM('color',(#523690),#309035); +#523690 = PRESENTATION_STYLE_ASSIGNMENT((#523691)); +#523691 = SURFACE_STYLE_USAGE(.BOTH.,#523692); +#523692 = SURFACE_SIDE_STYLE('',(#523693)); +#523693 = SURFACE_STYLE_FILL_AREA(#523694); +#523694 = FILL_AREA_STYLE('',(#523695)); +#523695 = FILL_AREA_STYLE_COLOUR('',#516784); +#523696 = STYLED_ITEM('color',(#523697),#309795); +#523697 = PRESENTATION_STYLE_ASSIGNMENT((#523698)); +#523698 = SURFACE_STYLE_USAGE(.BOTH.,#523699); +#523699 = SURFACE_SIDE_STYLE('',(#523700)); +#523700 = SURFACE_STYLE_FILL_AREA(#523701); +#523701 = FILL_AREA_STYLE('',(#523702)); +#523702 = FILL_AREA_STYLE_COLOUR('',#516784); +#523703 = STYLED_ITEM('color',(#523704),#310353); +#523704 = PRESENTATION_STYLE_ASSIGNMENT((#523705)); +#523705 = SURFACE_STYLE_USAGE(.BOTH.,#523706); +#523706 = SURFACE_SIDE_STYLE('',(#523707)); +#523707 = SURFACE_STYLE_FILL_AREA(#523708); +#523708 = FILL_AREA_STYLE('',(#523709)); +#523709 = FILL_AREA_STYLE_COLOUR('',#516784); +#523710 = STYLED_ITEM('color',(#523711),#310445); +#523711 = PRESENTATION_STYLE_ASSIGNMENT((#523712)); +#523712 = SURFACE_STYLE_USAGE(.BOTH.,#523713); +#523713 = SURFACE_SIDE_STYLE('',(#523714)); +#523714 = SURFACE_STYLE_FILL_AREA(#523715); +#523715 = FILL_AREA_STYLE('',(#523716)); +#523716 = FILL_AREA_STYLE_COLOUR('',#516784); +#523717 = STYLED_ITEM('color',(#523718),#310537); +#523718 = PRESENTATION_STYLE_ASSIGNMENT((#523719)); +#523719 = SURFACE_STYLE_USAGE(.BOTH.,#523720); +#523720 = SURFACE_SIDE_STYLE('',(#523721)); +#523721 = SURFACE_STYLE_FILL_AREA(#523722); +#523722 = FILL_AREA_STYLE('',(#523723)); +#523723 = FILL_AREA_STYLE_COLOUR('',#516784); +#523724 = STYLED_ITEM('color',(#523725),#310629); +#523725 = PRESENTATION_STYLE_ASSIGNMENT((#523726)); +#523726 = SURFACE_STYLE_USAGE(.BOTH.,#523727); +#523727 = SURFACE_SIDE_STYLE('',(#523728)); +#523728 = SURFACE_STYLE_FILL_AREA(#523729); +#523729 = FILL_AREA_STYLE('',(#523730)); +#523730 = FILL_AREA_STYLE_COLOUR('',#516784); +#523731 = STYLED_ITEM('color',(#523732),#314308); +#523732 = PRESENTATION_STYLE_ASSIGNMENT((#523733)); +#523733 = SURFACE_STYLE_USAGE(.BOTH.,#523734); +#523734 = SURFACE_SIDE_STYLE('',(#523735)); +#523735 = SURFACE_STYLE_FILL_AREA(#523736); +#523736 = FILL_AREA_STYLE('',(#523737)); +#523737 = FILL_AREA_STYLE_COLOUR('',#516784); +#523738 = STYLED_ITEM('color',(#523739),#314732); +#523739 = PRESENTATION_STYLE_ASSIGNMENT((#523740)); +#523740 = SURFACE_STYLE_USAGE(.BOTH.,#523741); +#523741 = SURFACE_SIDE_STYLE('',(#523742)); +#523742 = SURFACE_STYLE_FILL_AREA(#523743); +#523743 = FILL_AREA_STYLE('',(#523744)); +#523744 = FILL_AREA_STYLE_COLOUR('',#516784); +#523745 = STYLED_ITEM('color',(#523746),#315156); +#523746 = PRESENTATION_STYLE_ASSIGNMENT((#523747)); +#523747 = SURFACE_STYLE_USAGE(.BOTH.,#523748); +#523748 = SURFACE_SIDE_STYLE('',(#523749)); +#523749 = SURFACE_STYLE_FILL_AREA(#523750); +#523750 = FILL_AREA_STYLE('',(#523751)); +#523751 = FILL_AREA_STYLE_COLOUR('',#516784); +#523752 = STYLED_ITEM('color',(#523753),#317704); +#523753 = PRESENTATION_STYLE_ASSIGNMENT((#523754)); +#523754 = SURFACE_STYLE_USAGE(.BOTH.,#523755); +#523755 = SURFACE_SIDE_STYLE('',(#523756)); +#523756 = SURFACE_STYLE_FILL_AREA(#523757); +#523757 = FILL_AREA_STYLE('',(#523758)); +#523758 = FILL_AREA_STYLE_COLOUR('',#516784); +#523759 = STYLED_ITEM('color',(#523760),#318101); +#523760 = PRESENTATION_STYLE_ASSIGNMENT((#523761)); +#523761 = SURFACE_STYLE_USAGE(.BOTH.,#523762); +#523762 = SURFACE_SIDE_STYLE('',(#523763)); +#523763 = SURFACE_STYLE_FILL_AREA(#523764); +#523764 = FILL_AREA_STYLE('',(#523765)); +#523765 = FILL_AREA_STYLE_COLOUR('',#516784); +#523766 = STYLED_ITEM('color',(#523767),#318564); +#523767 = PRESENTATION_STYLE_ASSIGNMENT((#523768)); +#523768 = SURFACE_STYLE_USAGE(.BOTH.,#523769); +#523769 = SURFACE_SIDE_STYLE('',(#523770)); +#523770 = SURFACE_STYLE_FILL_AREA(#523771); +#523771 = FILL_AREA_STYLE('',(#523772)); +#523772 = FILL_AREA_STYLE_COLOUR('',#516784); +#523773 = STYLED_ITEM('color',(#523774),#318963); +#523774 = PRESENTATION_STYLE_ASSIGNMENT((#523775)); +#523775 = SURFACE_STYLE_USAGE(.BOTH.,#523776); +#523776 = SURFACE_SIDE_STYLE('',(#523777)); +#523777 = SURFACE_STYLE_FILL_AREA(#523778); +#523778 = FILL_AREA_STYLE('',(#523779)); +#523779 = FILL_AREA_STYLE_COLOUR('',#516784); +#523780 = STYLED_ITEM('color',(#523781),#319358); +#523781 = PRESENTATION_STYLE_ASSIGNMENT((#523782)); +#523782 = SURFACE_STYLE_USAGE(.BOTH.,#523783); +#523783 = SURFACE_SIDE_STYLE('',(#523784)); +#523784 = SURFACE_STYLE_FILL_AREA(#523785); +#523785 = FILL_AREA_STYLE('',(#523786)); +#523786 = FILL_AREA_STYLE_COLOUR('',#516784); +#523787 = STYLED_ITEM('color',(#523788),#319984); +#523788 = PRESENTATION_STYLE_ASSIGNMENT((#523789)); +#523789 = SURFACE_STYLE_USAGE(.BOTH.,#523790); +#523790 = SURFACE_SIDE_STYLE('',(#523791)); +#523791 = SURFACE_STYLE_FILL_AREA(#523792); +#523792 = FILL_AREA_STYLE('',(#523793)); +#523793 = FILL_AREA_STYLE_COLOUR('',#516784); +#523794 = STYLED_ITEM('color',(#523795),#321546); +#523795 = PRESENTATION_STYLE_ASSIGNMENT((#523796)); +#523796 = SURFACE_STYLE_USAGE(.BOTH.,#523797); +#523797 = SURFACE_SIDE_STYLE('',(#523798)); +#523798 = SURFACE_STYLE_FILL_AREA(#523799); +#523799 = FILL_AREA_STYLE('',(#523800)); +#523800 = FILL_AREA_STYLE_COLOUR('',#516784); +#523801 = STYLED_ITEM('color',(#523802),#322506); +#523802 = PRESENTATION_STYLE_ASSIGNMENT((#523803)); +#523803 = SURFACE_STYLE_USAGE(.BOTH.,#523804); +#523804 = SURFACE_SIDE_STYLE('',(#523805)); +#523805 = SURFACE_STYLE_FILL_AREA(#523806); +#523806 = FILL_AREA_STYLE('',(#523807)); +#523807 = FILL_AREA_STYLE_COLOUR('',#516784); +#523808 = STYLED_ITEM('color',(#523809),#323767); +#523809 = PRESENTATION_STYLE_ASSIGNMENT((#523810)); +#523810 = SURFACE_STYLE_USAGE(.BOTH.,#523811); +#523811 = SURFACE_SIDE_STYLE('',(#523812)); +#523812 = SURFACE_STYLE_FILL_AREA(#523813); +#523813 = FILL_AREA_STYLE('',(#523814)); +#523814 = FILL_AREA_STYLE_COLOUR('',#516784); +#523815 = STYLED_ITEM('color',(#523816),#324919); +#523816 = PRESENTATION_STYLE_ASSIGNMENT((#523817)); +#523817 = SURFACE_STYLE_USAGE(.BOTH.,#523818); +#523818 = SURFACE_SIDE_STYLE('',(#523819)); +#523819 = SURFACE_STYLE_FILL_AREA(#523820); +#523820 = FILL_AREA_STYLE('',(#523821)); +#523821 = FILL_AREA_STYLE_COLOUR('',#516784); +#523822 = STYLED_ITEM('color',(#523823),#325279); +#523823 = PRESENTATION_STYLE_ASSIGNMENT((#523824)); +#523824 = SURFACE_STYLE_USAGE(.BOTH.,#523825); +#523825 = SURFACE_SIDE_STYLE('',(#523826)); +#523826 = SURFACE_STYLE_FILL_AREA(#523827); +#523827 = FILL_AREA_STYLE('',(#523828)); +#523828 = FILL_AREA_STYLE_COLOUR('',#516784); +#523829 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #523830,#523840,#523848,#523855,#523862,#523869,#523876,#523883, + #523890,#523897,#523904,#523911,#523918,#523925,#523932,#523939, + #523946,#523953,#523960,#523967,#523974,#523981,#523988,#523995, + #524002,#524009,#524016,#524023,#524030,#524037,#524044,#524051, + #524060,#524067,#524074,#524081,#524088,#524095,#524102,#524109, + #524116,#524123,#524130,#524137,#524144,#524151,#524158,#524165, + #524172,#524179,#524186,#524193,#524200,#524207,#524214,#524221, + #524228,#524235,#524242,#524249,#524256,#524263,#524270,#524277, + #524284,#524291,#524298,#524305,#524312,#524319,#524326,#524333, + #524340,#524347,#524354,#524361,#524368,#524375,#524382,#524389, + #524396,#524403,#524410,#524417,#524424,#524431,#524438,#524445, + #524452,#524459,#524466,#524473,#524480,#524487,#524494,#524501, + #524508,#524515,#524522,#524529,#524536,#524543,#524550,#524557, + #524564,#524571,#524578,#524585,#524592,#524599,#524606,#524613, + #524620,#524627,#524634,#524641,#524648,#524655,#524662,#524669, + #524676,#524683,#524690,#524697,#524704,#524711,#524718,#524725, + #524732,#524739,#524746,#524753,#524760,#524767,#524774,#524781, + #524788,#524795,#524802,#524809,#524816,#524823,#524830,#524837, + #524844,#524851,#524858,#524865,#524872,#524879,#524886,#524893, + #524900,#524907,#524914,#524921,#524928,#524935,#524942,#524949, + #524956,#524963,#524970,#524977,#524984,#524991,#524998,#525005, + #525012,#525019,#525026,#525033,#525040,#525047,#525054,#525061, + #525068,#525075,#525082,#525089,#525096,#525103,#525110,#525117, + #525124,#525131,#525138,#525145,#525152,#525159,#525166,#525173, + #525180,#525187,#525194,#525201,#525208,#525215,#525222,#525229, + #525236,#525243,#525250,#525257,#525264,#525271,#525278,#525285, + #525292,#525299,#525306,#525313,#525320,#525327,#525334,#525341, + #525348,#525355,#525362,#525369,#525376,#525383,#525390,#525397, + #525404,#525411,#525418,#525425,#525432,#525439,#525446,#525453, + #525460,#525467,#525474,#525481,#525488,#525495,#525502,#525509, + #525516,#525523,#525530,#525537,#525544,#525551,#525558,#525565, + #525572,#525579,#525586,#525593,#525600,#525607,#525614,#525621, + #525628,#525635,#525642,#525649,#525656,#525663,#525670,#525677, + #525684,#525691,#525698,#525705,#525712,#525719,#525726,#525733, + #525740,#525747,#525754,#525761,#525768,#525775,#525782,#525789, + #525796,#525803,#525810,#525817,#525824,#525831,#525838,#525845, + #525852,#525859,#525866,#525873,#525880,#525887,#525894,#525901, + #525908,#525915,#525922,#525929,#525936,#525943,#525950,#525957, + #525964,#525971,#525978,#525985,#525992,#525999,#526006,#526013, + #526020,#526027,#526034,#526041,#526048,#526055,#526062,#526069, + #526076,#526083,#526090,#526097,#526104,#526111,#526118,#526125, + #526132,#526139,#526146,#526153,#526160,#526167,#526174,#526181, + #526188,#526195,#526202,#526209,#526216,#526223,#526230,#526237, + #526244,#526251,#526258,#526265,#526272,#526279,#526286,#526293, + #526300,#526307,#526314,#526321,#526328,#526335,#526342,#526349, + #526356,#526363,#526370,#526377,#526384,#526391,#526398,#526405, + #526412,#526419,#526426,#526433,#526440,#526447,#526454,#526461, + #526468,#526475,#526482,#526489,#526496,#526503,#526510,#526517, + #526524,#526531,#526538,#526545,#526552,#526559,#526566,#526573, + #526580,#526587,#526594,#526601,#526608,#526615,#526622,#526629, + #526636,#526643,#526650,#526657,#526664,#526671,#526678,#526685, + #526692,#526699,#526706,#526713,#526720,#526727,#526734,#526741, + #526748,#526755,#526762,#526769,#526776,#526783,#526790,#526797, + #526804,#526811,#526818,#526825,#526832,#526839,#526846,#526853, + #526860,#526867,#526874,#526881,#526888,#526895,#526902,#526909, + #526916,#526923,#526930,#526937,#526944,#526951,#526958,#526965, + #526972,#526979,#526986,#526993,#527000,#527007,#527014,#527021, + #527028,#527035,#527042,#527049,#527056,#527063,#527070,#527077, + #527084,#527091,#527098,#527105,#527112,#527119,#527126,#527133, + #527140,#527147,#527154,#527161,#527168,#527175,#527182,#527189, + #527196,#527203,#527210,#527217,#527226,#527234,#527241,#527248, + #527255,#527262,#527269,#527276,#527283,#527290,#527297,#527304, + #527311,#527318,#527325,#527332,#527339,#527346,#527353,#527360, + #527367,#527376,#527383,#527390,#527397,#527404,#527411,#527418, + #527425,#527432,#527439,#527446,#527453,#527460,#527467,#527474, + #527481,#527488,#527495,#527502,#527511,#527518,#527525,#527532, + #527539,#527546,#527553,#527560,#527567,#527574,#527581,#527588, + #527595,#527602,#527609,#527616,#527623,#527630,#527637,#527646, + #527653,#527660,#527667,#527674,#527681,#527688,#527695,#527702, + #527709,#527716,#527723,#527730,#527737,#527744,#527751,#527758, + #527765,#527772,#527781,#527788,#527795,#527802,#527809,#527816, + #527823,#527830,#527837,#527844,#527851,#527858,#527865,#527872, + #527879,#527886,#527893,#527900,#527907,#527916,#527923,#527930, + #527937,#527944,#527951,#527958,#527965,#527972,#527979,#527986, + #527993,#528000,#528007,#528014,#528021,#528028,#528035,#528042, + #528051,#528058,#528065,#528072,#528079,#528086,#528093,#528100, + #528107,#528114,#528121,#528128,#528135,#528142,#528149,#528156, + #528163,#528170,#528177,#528186,#528193,#528200,#528207,#528214, + #528221,#528228,#528235,#528242,#528249,#528256,#528263,#528270, + #528277,#528284,#528291,#528298,#528305,#528312,#528321,#528328, + #528335,#528342,#528349,#528356,#528363,#528370,#528377,#528384, + #528391,#528398,#528405,#528412,#528419,#528426,#528433,#528440, + #528447,#528456,#528463,#528470,#528477,#528484,#528491,#528498, + #528505,#528512,#528519,#528526,#528533,#528540,#528547,#528554, + #528561,#528568,#528575,#528582,#528591,#528598,#528605,#528612, + #528619,#528626,#528633,#528640,#528647,#528654,#528661,#528668, + #528675,#528682,#528689,#528696,#528703,#528710,#528717,#528726, + #528733,#528740,#528747,#528754,#528761,#528768,#528775,#528782, + #528789,#528796,#528803,#528810,#528817,#528824,#528831,#528838, + #528845,#528852,#528861,#528868,#528875,#528882,#528889,#528896, + #528903,#528910,#528917,#528924,#528931,#528938,#528945,#528952, + #528959,#528966,#528973,#528980,#528987,#528996,#529003,#529010, + #529017,#529024,#529031,#529038,#529045,#529052,#529059,#529066, + #529073,#529080,#529087,#529094,#529101,#529108,#529115,#529122, + #529131,#529138,#529145,#529152,#529159,#529166,#529173,#529180, + #529187,#529194,#529201,#529208,#529215,#529222,#529229,#529236, + #529243,#529250,#529257,#529266,#529273,#529280,#529287,#529294, + #529301,#529308,#529315,#529322,#529329,#529336,#529343,#529350, + #529357,#529364,#529371,#529378,#529385,#529392,#529401,#529408, + #529415,#529422,#529429,#529436,#529443,#529450,#529457,#529464, + #529471,#529478,#529485,#529492,#529499,#529506,#529513,#529520, + #529527,#529536,#529543,#529550,#529557,#529564,#529571,#529578, + #529585,#529592,#529599,#529606,#529613,#529620,#529627,#529634, + #529641,#529648,#529655,#529662,#529671,#529678,#529685,#529692, + #529699,#529706,#529713,#529720,#529727,#529734,#529741,#529748, + #529755,#529762,#529769,#529776,#529783,#529790,#529797,#529806, + #529813,#529820,#529827,#529834,#529841,#529848,#529855,#529862, + #529869,#529876,#529883,#529890,#529897,#529904,#529911,#529918, + #529925,#529932,#529941,#529948,#529955,#529962,#529969,#529976, + #529983,#529990,#529997,#530004,#530011,#530018,#530025,#530032, + #530039,#530046,#530053,#530060,#530067,#530076,#530083,#530090, + #530097,#530104,#530111,#530118,#530125,#530132,#530139,#530146, + #530153,#530160,#530167,#530174,#530181,#530188,#530195,#530202, + #530211,#530218,#530225,#530232,#530239,#530246,#530253,#530260, + #530267,#530274,#530281,#530288,#530295,#530302,#530309,#530316, + #530323,#530330,#530337,#530346,#530353,#530360,#530367,#530374, + #530381,#530388,#530395,#530402,#530409,#530416,#530423,#530430, + #530437,#530444,#530451,#530458,#530465,#530472,#530481,#530488, + #530495,#530502,#530509,#530516,#530523,#530530,#530537,#530544, + #530551,#530558,#530565,#530572,#530579,#530586,#530593,#530600, + #530607,#530616,#530623,#530630,#530637,#530644,#530651,#530658, + #530665,#530672,#530679,#530686,#530693,#530700,#530707,#530714, + #530721,#530728,#530735,#530742,#530751,#530758,#530765,#530772, + #530779,#530786,#530793,#530800,#530807,#530814,#530821,#530828, + #530835,#530842,#530849,#530856,#530863,#530870,#530877,#530886, + #530893,#530900,#530907,#530914,#530921,#530928,#530935,#530942, + #530949,#530956,#530963,#530970,#530977,#530984,#530991,#530998, + #531005,#531012,#531021,#531028,#531035,#531042,#531049,#531056, + #531063,#531070,#531077,#531084,#531091,#531098,#531105,#531112, + #531119,#531126,#531133,#531140,#531147,#531156,#531163,#531170, + #531177,#531184,#531191,#531198,#531205,#531212,#531219,#531226, + #531233,#531240,#531247,#531254,#531261,#531268,#531275,#531282, + #531291,#531298,#531305,#531312,#531319,#531326,#531333,#531340, + #531347,#531354,#531361,#531368,#531375,#531382,#531389,#531396, + #531403,#531410,#531417,#531426,#531433,#531440,#531447,#531454, + #531461,#531468,#531475,#531482,#531489,#531496,#531503,#531510, + #531517,#531524,#531531,#531538,#531545,#531552,#531561,#531568, + #531575,#531582,#531589,#531596,#531603,#531610,#531617,#531624, + #531631,#531638,#531645,#531652,#531659,#531666,#531673,#531680, + #531687,#531696,#531703,#531710,#531717,#531724,#531731,#531738, + #531745,#531752,#531759,#531766,#531773,#531780,#531787,#531794, + #531801,#531808,#531815,#531822,#531831,#531838,#531845,#531852, + #531859,#531866,#531873,#531880,#531887,#531894,#531901,#531908, + #531915,#531922,#531929,#531936,#531943,#531950,#531957,#531966, + #531973,#531980,#531987,#531994,#532001,#532008,#532015,#532022, + #532029,#532036,#532043,#532050,#532057,#532064,#532071,#532078, + #532085,#532092,#532101,#532108,#532115,#532122,#532129,#532136, + #532143,#532150,#532157,#532164,#532171,#532178,#532185,#532192, + #532199,#532206,#532213,#532220,#532227,#532236,#532243,#532250, + #532257,#532264,#532271,#532278,#532285,#532292,#532299,#532306, + #532313,#532320,#532327,#532334,#532341,#532348,#532355,#532362, + #532371,#532378,#532385,#532392,#532399,#532406,#532413,#532420, + #532427,#532434,#532441,#532448,#532455,#532462,#532469,#532476, + #532483,#532490,#532497,#532506,#532513,#532520,#532527,#532534, + #532541,#532548,#532555,#532562,#532569,#532576,#532583,#532590, + #532597,#532604,#532611,#532618,#532625,#532632,#532641,#532648, + #532655,#532662,#532669,#532676,#532683,#532690,#532697,#532704, + #532711,#532718,#532725,#532732,#532739,#532746,#532753,#532760, + #532767,#532776,#532783,#532790,#532797,#532804,#532811,#532818, + #532827,#532834,#532841,#532848,#532855,#532862,#532869,#532878, + #532885,#532892,#532899,#532906,#532913,#532920,#532929,#532936, + #532943,#532950,#532957,#532964,#532971,#532980,#532987,#532994, + #533001,#533008,#533015,#533022,#533031,#533038,#533045,#533052, + #533059,#533066,#533073,#533082,#533089,#533096,#533103,#533110, + #533117,#533124,#533133,#533140,#533147,#533154,#533161,#533168, + #533175,#533184,#533191,#533198,#533205,#533212,#533219),#68501); +#523830 = STYLED_ITEM('color',(#523831),#33402); +#523831 = PRESENTATION_STYLE_ASSIGNMENT((#523832,#523838)); +#523832 = SURFACE_STYLE_USAGE(.BOTH.,#523833); +#523833 = SURFACE_SIDE_STYLE('',(#523834)); +#523834 = SURFACE_STYLE_FILL_AREA(#523835); +#523835 = FILL_AREA_STYLE('',(#523836)); +#523836 = FILL_AREA_STYLE_COLOUR('',#523837); +#523837 = COLOUR_RGB('',0.800000010877,0.800000010877,0.800000010877); +#523838 = CURVE_STYLE('',#523839,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#523839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#523840 = OVER_RIDING_STYLED_ITEM('overriding color',(#523841),#33404, + #523830); +#523841 = PRESENTATION_STYLE_ASSIGNMENT((#523842)); +#523842 = SURFACE_STYLE_USAGE(.BOTH.,#523843); +#523843 = SURFACE_SIDE_STYLE('',(#523844)); +#523844 = SURFACE_STYLE_FILL_AREA(#523845); +#523845 = FILL_AREA_STYLE('',(#523846)); +#523846 = FILL_AREA_STYLE_COLOUR('',#523847); +#523847 = COLOUR_RGB('',0.1599999992,0.1599999992,0.1599999992); +#523848 = OVER_RIDING_STYLED_ITEM('overriding color',(#523849),#33444, + #523830); +#523849 = PRESENTATION_STYLE_ASSIGNMENT((#523850)); +#523850 = SURFACE_STYLE_USAGE(.BOTH.,#523851); +#523851 = SURFACE_SIDE_STYLE('',(#523852)); +#523852 = SURFACE_STYLE_FILL_AREA(#523853); +#523853 = FILL_AREA_STYLE('',(#523854)); +#523854 = FILL_AREA_STYLE_COLOUR('',#523847); +#523855 = OVER_RIDING_STYLED_ITEM('overriding color',(#523856),#33475, + #523830); +#523856 = PRESENTATION_STYLE_ASSIGNMENT((#523857)); +#523857 = SURFACE_STYLE_USAGE(.BOTH.,#523858); +#523858 = SURFACE_SIDE_STYLE('',(#523859)); +#523859 = SURFACE_STYLE_FILL_AREA(#523860); +#523860 = FILL_AREA_STYLE('',(#523861)); +#523861 = FILL_AREA_STYLE_COLOUR('',#523847); +#523862 = OVER_RIDING_STYLED_ITEM('overriding color',(#523863),#33506, + #523830); +#523863 = PRESENTATION_STYLE_ASSIGNMENT((#523864)); +#523864 = SURFACE_STYLE_USAGE(.BOTH.,#523865); +#523865 = SURFACE_SIDE_STYLE('',(#523866)); +#523866 = SURFACE_STYLE_FILL_AREA(#523867); +#523867 = FILL_AREA_STYLE('',(#523868)); +#523868 = FILL_AREA_STYLE_COLOUR('',#523847); +#523869 = OVER_RIDING_STYLED_ITEM('overriding color',(#523870),#33537, + #523830); +#523870 = PRESENTATION_STYLE_ASSIGNMENT((#523871)); +#523871 = SURFACE_STYLE_USAGE(.BOTH.,#523872); +#523872 = SURFACE_SIDE_STYLE('',(#523873)); +#523873 = SURFACE_STYLE_FILL_AREA(#523874); +#523874 = FILL_AREA_STYLE('',(#523875)); +#523875 = FILL_AREA_STYLE_COLOUR('',#523847); +#523876 = OVER_RIDING_STYLED_ITEM('overriding color',(#523877),#33568, + #523830); +#523877 = PRESENTATION_STYLE_ASSIGNMENT((#523878)); +#523878 = SURFACE_STYLE_USAGE(.BOTH.,#523879); +#523879 = SURFACE_SIDE_STYLE('',(#523880)); +#523880 = SURFACE_STYLE_FILL_AREA(#523881); +#523881 = FILL_AREA_STYLE('',(#523882)); +#523882 = FILL_AREA_STYLE_COLOUR('',#523847); +#523883 = OVER_RIDING_STYLED_ITEM('overriding color',(#523884),#33599, + #523830); +#523884 = PRESENTATION_STYLE_ASSIGNMENT((#523885)); +#523885 = SURFACE_STYLE_USAGE(.BOTH.,#523886); +#523886 = SURFACE_SIDE_STYLE('',(#523887)); +#523887 = SURFACE_STYLE_FILL_AREA(#523888); +#523888 = FILL_AREA_STYLE('',(#523889)); +#523889 = FILL_AREA_STYLE_COLOUR('',#523847); +#523890 = OVER_RIDING_STYLED_ITEM('overriding color',(#523891),#33630, + #523830); +#523891 = PRESENTATION_STYLE_ASSIGNMENT((#523892)); +#523892 = SURFACE_STYLE_USAGE(.BOTH.,#523893); +#523893 = SURFACE_SIDE_STYLE('',(#523894)); +#523894 = SURFACE_STYLE_FILL_AREA(#523895); +#523895 = FILL_AREA_STYLE('',(#523896)); +#523896 = FILL_AREA_STYLE_COLOUR('',#523847); +#523897 = OVER_RIDING_STYLED_ITEM('overriding color',(#523898),#33661, + #523830); +#523898 = PRESENTATION_STYLE_ASSIGNMENT((#523899)); +#523899 = SURFACE_STYLE_USAGE(.BOTH.,#523900); +#523900 = SURFACE_SIDE_STYLE('',(#523901)); +#523901 = SURFACE_STYLE_FILL_AREA(#523902); +#523902 = FILL_AREA_STYLE('',(#523903)); +#523903 = FILL_AREA_STYLE_COLOUR('',#523847); +#523904 = OVER_RIDING_STYLED_ITEM('overriding color',(#523905),#33692, + #523830); +#523905 = PRESENTATION_STYLE_ASSIGNMENT((#523906)); +#523906 = SURFACE_STYLE_USAGE(.BOTH.,#523907); +#523907 = SURFACE_SIDE_STYLE('',(#523908)); +#523908 = SURFACE_STYLE_FILL_AREA(#523909); +#523909 = FILL_AREA_STYLE('',(#523910)); +#523910 = FILL_AREA_STYLE_COLOUR('',#523847); +#523911 = OVER_RIDING_STYLED_ITEM('overriding color',(#523912),#33723, + #523830); +#523912 = PRESENTATION_STYLE_ASSIGNMENT((#523913)); +#523913 = SURFACE_STYLE_USAGE(.BOTH.,#523914); +#523914 = SURFACE_SIDE_STYLE('',(#523915)); +#523915 = SURFACE_STYLE_FILL_AREA(#523916); +#523916 = FILL_AREA_STYLE('',(#523917)); +#523917 = FILL_AREA_STYLE_COLOUR('',#523847); +#523918 = OVER_RIDING_STYLED_ITEM('overriding color',(#523919),#33754, + #523830); +#523919 = PRESENTATION_STYLE_ASSIGNMENT((#523920)); +#523920 = SURFACE_STYLE_USAGE(.BOTH.,#523921); +#523921 = SURFACE_SIDE_STYLE('',(#523922)); +#523922 = SURFACE_STYLE_FILL_AREA(#523923); +#523923 = FILL_AREA_STYLE('',(#523924)); +#523924 = FILL_AREA_STYLE_COLOUR('',#523847); +#523925 = OVER_RIDING_STYLED_ITEM('overriding color',(#523926),#33785, + #523830); +#523926 = PRESENTATION_STYLE_ASSIGNMENT((#523927)); +#523927 = SURFACE_STYLE_USAGE(.BOTH.,#523928); +#523928 = SURFACE_SIDE_STYLE('',(#523929)); +#523929 = SURFACE_STYLE_FILL_AREA(#523930); +#523930 = FILL_AREA_STYLE('',(#523931)); +#523931 = FILL_AREA_STYLE_COLOUR('',#523847); +#523932 = OVER_RIDING_STYLED_ITEM('overriding color',(#523933),#33816, + #523830); +#523933 = PRESENTATION_STYLE_ASSIGNMENT((#523934)); +#523934 = SURFACE_STYLE_USAGE(.BOTH.,#523935); +#523935 = SURFACE_SIDE_STYLE('',(#523936)); +#523936 = SURFACE_STYLE_FILL_AREA(#523937); +#523937 = FILL_AREA_STYLE('',(#523938)); +#523938 = FILL_AREA_STYLE_COLOUR('',#523847); +#523939 = OVER_RIDING_STYLED_ITEM('overriding color',(#523940),#33847, + #523830); +#523940 = PRESENTATION_STYLE_ASSIGNMENT((#523941)); +#523941 = SURFACE_STYLE_USAGE(.BOTH.,#523942); +#523942 = SURFACE_SIDE_STYLE('',(#523943)); +#523943 = SURFACE_STYLE_FILL_AREA(#523944); +#523944 = FILL_AREA_STYLE('',(#523945)); +#523945 = FILL_AREA_STYLE_COLOUR('',#523847); +#523946 = OVER_RIDING_STYLED_ITEM('overriding color',(#523947),#33878, + #523830); +#523947 = PRESENTATION_STYLE_ASSIGNMENT((#523948)); +#523948 = SURFACE_STYLE_USAGE(.BOTH.,#523949); +#523949 = SURFACE_SIDE_STYLE('',(#523950)); +#523950 = SURFACE_STYLE_FILL_AREA(#523951); +#523951 = FILL_AREA_STYLE('',(#523952)); +#523952 = FILL_AREA_STYLE_COLOUR('',#523847); +#523953 = OVER_RIDING_STYLED_ITEM('overriding color',(#523954),#33909, + #523830); +#523954 = PRESENTATION_STYLE_ASSIGNMENT((#523955)); +#523955 = SURFACE_STYLE_USAGE(.BOTH.,#523956); +#523956 = SURFACE_SIDE_STYLE('',(#523957)); +#523957 = SURFACE_STYLE_FILL_AREA(#523958); +#523958 = FILL_AREA_STYLE('',(#523959)); +#523959 = FILL_AREA_STYLE_COLOUR('',#523847); +#523960 = OVER_RIDING_STYLED_ITEM('overriding color',(#523961),#33940, + #523830); +#523961 = PRESENTATION_STYLE_ASSIGNMENT((#523962)); +#523962 = SURFACE_STYLE_USAGE(.BOTH.,#523963); +#523963 = SURFACE_SIDE_STYLE('',(#523964)); +#523964 = SURFACE_STYLE_FILL_AREA(#523965); +#523965 = FILL_AREA_STYLE('',(#523966)); +#523966 = FILL_AREA_STYLE_COLOUR('',#523847); +#523967 = OVER_RIDING_STYLED_ITEM('overriding color',(#523968),#33971, + #523830); +#523968 = PRESENTATION_STYLE_ASSIGNMENT((#523969)); +#523969 = SURFACE_STYLE_USAGE(.BOTH.,#523970); +#523970 = SURFACE_SIDE_STYLE('',(#523971)); +#523971 = SURFACE_STYLE_FILL_AREA(#523972); +#523972 = FILL_AREA_STYLE('',(#523973)); +#523973 = FILL_AREA_STYLE_COLOUR('',#523847); +#523974 = OVER_RIDING_STYLED_ITEM('overriding color',(#523975),#34002, + #523830); +#523975 = PRESENTATION_STYLE_ASSIGNMENT((#523976)); +#523976 = SURFACE_STYLE_USAGE(.BOTH.,#523977); +#523977 = SURFACE_SIDE_STYLE('',(#523978)); +#523978 = SURFACE_STYLE_FILL_AREA(#523979); +#523979 = FILL_AREA_STYLE('',(#523980)); +#523980 = FILL_AREA_STYLE_COLOUR('',#523847); +#523981 = OVER_RIDING_STYLED_ITEM('overriding color',(#523982),#34033, + #523830); +#523982 = PRESENTATION_STYLE_ASSIGNMENT((#523983)); +#523983 = SURFACE_STYLE_USAGE(.BOTH.,#523984); +#523984 = SURFACE_SIDE_STYLE('',(#523985)); +#523985 = SURFACE_STYLE_FILL_AREA(#523986); +#523986 = FILL_AREA_STYLE('',(#523987)); +#523987 = FILL_AREA_STYLE_COLOUR('',#523847); +#523988 = OVER_RIDING_STYLED_ITEM('overriding color',(#523989),#34064, + #523830); +#523989 = PRESENTATION_STYLE_ASSIGNMENT((#523990)); +#523990 = SURFACE_STYLE_USAGE(.BOTH.,#523991); +#523991 = SURFACE_SIDE_STYLE('',(#523992)); +#523992 = SURFACE_STYLE_FILL_AREA(#523993); +#523993 = FILL_AREA_STYLE('',(#523994)); +#523994 = FILL_AREA_STYLE_COLOUR('',#523847); +#523995 = OVER_RIDING_STYLED_ITEM('overriding color',(#523996),#34095, + #523830); +#523996 = PRESENTATION_STYLE_ASSIGNMENT((#523997)); +#523997 = SURFACE_STYLE_USAGE(.BOTH.,#523998); +#523998 = SURFACE_SIDE_STYLE('',(#523999)); +#523999 = SURFACE_STYLE_FILL_AREA(#524000); +#524000 = FILL_AREA_STYLE('',(#524001)); +#524001 = FILL_AREA_STYLE_COLOUR('',#523847); +#524002 = OVER_RIDING_STYLED_ITEM('overriding color',(#524003),#34126, + #523830); +#524003 = PRESENTATION_STYLE_ASSIGNMENT((#524004)); +#524004 = SURFACE_STYLE_USAGE(.BOTH.,#524005); +#524005 = SURFACE_SIDE_STYLE('',(#524006)); +#524006 = SURFACE_STYLE_FILL_AREA(#524007); +#524007 = FILL_AREA_STYLE('',(#524008)); +#524008 = FILL_AREA_STYLE_COLOUR('',#523847); +#524009 = OVER_RIDING_STYLED_ITEM('overriding color',(#524010),#34157, + #523830); +#524010 = PRESENTATION_STYLE_ASSIGNMENT((#524011)); +#524011 = SURFACE_STYLE_USAGE(.BOTH.,#524012); +#524012 = SURFACE_SIDE_STYLE('',(#524013)); +#524013 = SURFACE_STYLE_FILL_AREA(#524014); +#524014 = FILL_AREA_STYLE('',(#524015)); +#524015 = FILL_AREA_STYLE_COLOUR('',#523847); +#524016 = OVER_RIDING_STYLED_ITEM('overriding color',(#524017),#34188, + #523830); +#524017 = PRESENTATION_STYLE_ASSIGNMENT((#524018)); +#524018 = SURFACE_STYLE_USAGE(.BOTH.,#524019); +#524019 = SURFACE_SIDE_STYLE('',(#524020)); +#524020 = SURFACE_STYLE_FILL_AREA(#524021); +#524021 = FILL_AREA_STYLE('',(#524022)); +#524022 = FILL_AREA_STYLE_COLOUR('',#523847); +#524023 = OVER_RIDING_STYLED_ITEM('overriding color',(#524024),#34219, + #523830); +#524024 = PRESENTATION_STYLE_ASSIGNMENT((#524025)); +#524025 = SURFACE_STYLE_USAGE(.BOTH.,#524026); +#524026 = SURFACE_SIDE_STYLE('',(#524027)); +#524027 = SURFACE_STYLE_FILL_AREA(#524028); +#524028 = FILL_AREA_STYLE('',(#524029)); +#524029 = FILL_AREA_STYLE_COLOUR('',#523847); +#524030 = OVER_RIDING_STYLED_ITEM('overriding color',(#524031),#34250, + #523830); +#524031 = PRESENTATION_STYLE_ASSIGNMENT((#524032)); +#524032 = SURFACE_STYLE_USAGE(.BOTH.,#524033); +#524033 = SURFACE_SIDE_STYLE('',(#524034)); +#524034 = SURFACE_STYLE_FILL_AREA(#524035); +#524035 = FILL_AREA_STYLE('',(#524036)); +#524036 = FILL_AREA_STYLE_COLOUR('',#523847); +#524037 = OVER_RIDING_STYLED_ITEM('overriding color',(#524038),#34272, + #523830); +#524038 = PRESENTATION_STYLE_ASSIGNMENT((#524039)); +#524039 = SURFACE_STYLE_USAGE(.BOTH.,#524040); +#524040 = SURFACE_SIDE_STYLE('',(#524041)); +#524041 = SURFACE_STYLE_FILL_AREA(#524042); +#524042 = FILL_AREA_STYLE('',(#524043)); +#524043 = FILL_AREA_STYLE_COLOUR('',#523847); +#524044 = OVER_RIDING_STYLED_ITEM('overriding color',(#524045),#34308, + #523830); +#524045 = PRESENTATION_STYLE_ASSIGNMENT((#524046)); +#524046 = SURFACE_STYLE_USAGE(.BOTH.,#524047); +#524047 = SURFACE_SIDE_STYLE('',(#524048)); +#524048 = SURFACE_STYLE_FILL_AREA(#524049); +#524049 = FILL_AREA_STYLE('',(#524050)); +#524050 = FILL_AREA_STYLE_COLOUR('',#523847); +#524051 = STYLED_ITEM('color',(#524052),#34344); +#524052 = PRESENTATION_STYLE_ASSIGNMENT((#524053,#524058)); +#524053 = SURFACE_STYLE_USAGE(.BOTH.,#524054); +#524054 = SURFACE_SIDE_STYLE('',(#524055)); +#524055 = SURFACE_STYLE_FILL_AREA(#524056); +#524056 = FILL_AREA_STYLE('',(#524057)); +#524057 = FILL_AREA_STYLE_COLOUR('',#523837); +#524058 = CURVE_STYLE('',#524059,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#524059 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#524060 = OVER_RIDING_STYLED_ITEM('overriding color',(#524061),#34346, + #524051); +#524061 = PRESENTATION_STYLE_ASSIGNMENT((#524062)); +#524062 = SURFACE_STYLE_USAGE(.BOTH.,#524063); +#524063 = SURFACE_SIDE_STYLE('',(#524064)); +#524064 = SURFACE_STYLE_FILL_AREA(#524065); +#524065 = FILL_AREA_STYLE('',(#524066)); +#524066 = FILL_AREA_STYLE_COLOUR('',#523847); +#524067 = OVER_RIDING_STYLED_ITEM('overriding color',(#524068),#34386, + #524051); +#524068 = PRESENTATION_STYLE_ASSIGNMENT((#524069)); +#524069 = SURFACE_STYLE_USAGE(.BOTH.,#524070); +#524070 = SURFACE_SIDE_STYLE('',(#524071)); +#524071 = SURFACE_STYLE_FILL_AREA(#524072); +#524072 = FILL_AREA_STYLE('',(#524073)); +#524073 = FILL_AREA_STYLE_COLOUR('',#523847); +#524074 = OVER_RIDING_STYLED_ITEM('overriding color',(#524075),#34425, + #524051); +#524075 = PRESENTATION_STYLE_ASSIGNMENT((#524076)); +#524076 = SURFACE_STYLE_USAGE(.BOTH.,#524077); +#524077 = SURFACE_SIDE_STYLE('',(#524078)); +#524078 = SURFACE_STYLE_FILL_AREA(#524079); +#524079 = FILL_AREA_STYLE('',(#524080)); +#524080 = FILL_AREA_STYLE_COLOUR('',#523847); +#524081 = OVER_RIDING_STYLED_ITEM('overriding color',(#524082),#34464, + #524051); +#524082 = PRESENTATION_STYLE_ASSIGNMENT((#524083)); +#524083 = SURFACE_STYLE_USAGE(.BOTH.,#524084); +#524084 = SURFACE_SIDE_STYLE('',(#524085)); +#524085 = SURFACE_STYLE_FILL_AREA(#524086); +#524086 = FILL_AREA_STYLE('',(#524087)); +#524087 = FILL_AREA_STYLE_COLOUR('',#523847); +#524088 = OVER_RIDING_STYLED_ITEM('overriding color',(#524089),#36707, + #524051); +#524089 = PRESENTATION_STYLE_ASSIGNMENT((#524090)); +#524090 = SURFACE_STYLE_USAGE(.BOTH.,#524091); +#524091 = SURFACE_SIDE_STYLE('',(#524092)); +#524092 = SURFACE_STYLE_FILL_AREA(#524093); +#524093 = FILL_AREA_STYLE('',(#524094)); +#524094 = FILL_AREA_STYLE_COLOUR('',#523847); +#524095 = OVER_RIDING_STYLED_ITEM('overriding color',(#524096),#38004, + #524051); +#524096 = PRESENTATION_STYLE_ASSIGNMENT((#524097)); +#524097 = SURFACE_STYLE_USAGE(.BOTH.,#524098); +#524098 = SURFACE_SIDE_STYLE('',(#524099)); +#524099 = SURFACE_STYLE_FILL_AREA(#524100); +#524100 = FILL_AREA_STYLE('',(#524101)); +#524101 = FILL_AREA_STYLE_COLOUR('',#523847); +#524102 = OVER_RIDING_STYLED_ITEM('overriding color',(#524103),#38028, + #524051); +#524103 = PRESENTATION_STYLE_ASSIGNMENT((#524104)); +#524104 = SURFACE_STYLE_USAGE(.BOTH.,#524105); +#524105 = SURFACE_SIDE_STYLE('',(#524106)); +#524106 = SURFACE_STYLE_FILL_AREA(#524107); +#524107 = FILL_AREA_STYLE('',(#524108)); +#524108 = FILL_AREA_STYLE_COLOUR('',#523847); +#524109 = OVER_RIDING_STYLED_ITEM('overriding color',(#524110),#38045, + #524051); +#524110 = PRESENTATION_STYLE_ASSIGNMENT((#524111)); +#524111 = SURFACE_STYLE_USAGE(.BOTH.,#524112); +#524112 = SURFACE_SIDE_STYLE('',(#524113)); +#524113 = SURFACE_STYLE_FILL_AREA(#524114); +#524114 = FILL_AREA_STYLE('',(#524115)); +#524115 = FILL_AREA_STYLE_COLOUR('',#523847); +#524116 = OVER_RIDING_STYLED_ITEM('overriding color',(#524117),#38069, + #524051); +#524117 = PRESENTATION_STYLE_ASSIGNMENT((#524118)); +#524118 = SURFACE_STYLE_USAGE(.BOTH.,#524119); +#524119 = SURFACE_SIDE_STYLE('',(#524120)); +#524120 = SURFACE_STYLE_FILL_AREA(#524121); +#524121 = FILL_AREA_STYLE('',(#524122)); +#524122 = FILL_AREA_STYLE_COLOUR('',#523847); +#524123 = OVER_RIDING_STYLED_ITEM('overriding color',(#524124),#38086, + #524051); +#524124 = PRESENTATION_STYLE_ASSIGNMENT((#524125)); +#524125 = SURFACE_STYLE_USAGE(.BOTH.,#524126); +#524126 = SURFACE_SIDE_STYLE('',(#524127)); +#524127 = SURFACE_STYLE_FILL_AREA(#524128); +#524128 = FILL_AREA_STYLE('',(#524129)); +#524129 = FILL_AREA_STYLE_COLOUR('',#523847); +#524130 = OVER_RIDING_STYLED_ITEM('overriding color',(#524131),#38110, + #524051); +#524131 = PRESENTATION_STYLE_ASSIGNMENT((#524132)); +#524132 = SURFACE_STYLE_USAGE(.BOTH.,#524133); +#524133 = SURFACE_SIDE_STYLE('',(#524134)); +#524134 = SURFACE_STYLE_FILL_AREA(#524135); +#524135 = FILL_AREA_STYLE('',(#524136)); +#524136 = FILL_AREA_STYLE_COLOUR('',#523847); +#524137 = OVER_RIDING_STYLED_ITEM('overriding color',(#524138),#38134, + #524051); +#524138 = PRESENTATION_STYLE_ASSIGNMENT((#524139)); +#524139 = SURFACE_STYLE_USAGE(.BOTH.,#524140); +#524140 = SURFACE_SIDE_STYLE('',(#524141)); +#524141 = SURFACE_STYLE_FILL_AREA(#524142); +#524142 = FILL_AREA_STYLE('',(#524143)); +#524143 = FILL_AREA_STYLE_COLOUR('',#523847); +#524144 = OVER_RIDING_STYLED_ITEM('overriding color',(#524145),#38158, + #524051); +#524145 = PRESENTATION_STYLE_ASSIGNMENT((#524146)); +#524146 = SURFACE_STYLE_USAGE(.BOTH.,#524147); +#524147 = SURFACE_SIDE_STYLE('',(#524148)); +#524148 = SURFACE_STYLE_FILL_AREA(#524149); +#524149 = FILL_AREA_STYLE('',(#524150)); +#524150 = FILL_AREA_STYLE_COLOUR('',#523847); +#524151 = OVER_RIDING_STYLED_ITEM('overriding color',(#524152),#38182, + #524051); +#524152 = PRESENTATION_STYLE_ASSIGNMENT((#524153)); +#524153 = SURFACE_STYLE_USAGE(.BOTH.,#524154); +#524154 = SURFACE_SIDE_STYLE('',(#524155)); +#524155 = SURFACE_STYLE_FILL_AREA(#524156); +#524156 = FILL_AREA_STYLE('',(#524157)); +#524157 = FILL_AREA_STYLE_COLOUR('',#523847); +#524158 = OVER_RIDING_STYLED_ITEM('overriding color',(#524159),#38206, + #524051); +#524159 = PRESENTATION_STYLE_ASSIGNMENT((#524160)); +#524160 = SURFACE_STYLE_USAGE(.BOTH.,#524161); +#524161 = SURFACE_SIDE_STYLE('',(#524162)); +#524162 = SURFACE_STYLE_FILL_AREA(#524163); +#524163 = FILL_AREA_STYLE('',(#524164)); +#524164 = FILL_AREA_STYLE_COLOUR('',#523847); +#524165 = OVER_RIDING_STYLED_ITEM('overriding color',(#524166),#38230, + #524051); +#524166 = PRESENTATION_STYLE_ASSIGNMENT((#524167)); +#524167 = SURFACE_STYLE_USAGE(.BOTH.,#524168); +#524168 = SURFACE_SIDE_STYLE('',(#524169)); +#524169 = SURFACE_STYLE_FILL_AREA(#524170); +#524170 = FILL_AREA_STYLE('',(#524171)); +#524171 = FILL_AREA_STYLE_COLOUR('',#523847); +#524172 = OVER_RIDING_STYLED_ITEM('overriding color',(#524173),#38254, + #524051); +#524173 = PRESENTATION_STYLE_ASSIGNMENT((#524174)); +#524174 = SURFACE_STYLE_USAGE(.BOTH.,#524175); +#524175 = SURFACE_SIDE_STYLE('',(#524176)); +#524176 = SURFACE_STYLE_FILL_AREA(#524177); +#524177 = FILL_AREA_STYLE('',(#524178)); +#524178 = FILL_AREA_STYLE_COLOUR('',#523847); +#524179 = OVER_RIDING_STYLED_ITEM('overriding color',(#524180),#38278, + #524051); +#524180 = PRESENTATION_STYLE_ASSIGNMENT((#524181)); +#524181 = SURFACE_STYLE_USAGE(.BOTH.,#524182); +#524182 = SURFACE_SIDE_STYLE('',(#524183)); +#524183 = SURFACE_STYLE_FILL_AREA(#524184); +#524184 = FILL_AREA_STYLE('',(#524185)); +#524185 = FILL_AREA_STYLE_COLOUR('',#523847); +#524186 = OVER_RIDING_STYLED_ITEM('overriding color',(#524187),#38309, + #524051); +#524187 = PRESENTATION_STYLE_ASSIGNMENT((#524188)); +#524188 = SURFACE_STYLE_USAGE(.BOTH.,#524189); +#524189 = SURFACE_SIDE_STYLE('',(#524190)); +#524190 = SURFACE_STYLE_FILL_AREA(#524191); +#524191 = FILL_AREA_STYLE('',(#524192)); +#524192 = FILL_AREA_STYLE_COLOUR('',#523847); +#524193 = OVER_RIDING_STYLED_ITEM('overriding color',(#524194),#38340, + #524051); +#524194 = PRESENTATION_STYLE_ASSIGNMENT((#524195)); +#524195 = SURFACE_STYLE_USAGE(.BOTH.,#524196); +#524196 = SURFACE_SIDE_STYLE('',(#524197)); +#524197 = SURFACE_STYLE_FILL_AREA(#524198); +#524198 = FILL_AREA_STYLE('',(#524199)); +#524199 = FILL_AREA_STYLE_COLOUR('',#523847); +#524200 = OVER_RIDING_STYLED_ITEM('overriding color',(#524201),#38364, + #524051); +#524201 = PRESENTATION_STYLE_ASSIGNMENT((#524202)); +#524202 = SURFACE_STYLE_USAGE(.BOTH.,#524203); +#524203 = SURFACE_SIDE_STYLE('',(#524204)); +#524204 = SURFACE_STYLE_FILL_AREA(#524205); +#524205 = FILL_AREA_STYLE('',(#524206)); +#524206 = FILL_AREA_STYLE_COLOUR('',#523847); +#524207 = OVER_RIDING_STYLED_ITEM('overriding color',(#524208),#38388, + #524051); +#524208 = PRESENTATION_STYLE_ASSIGNMENT((#524209)); +#524209 = SURFACE_STYLE_USAGE(.BOTH.,#524210); +#524210 = SURFACE_SIDE_STYLE('',(#524211)); +#524211 = SURFACE_STYLE_FILL_AREA(#524212); +#524212 = FILL_AREA_STYLE('',(#524213)); +#524213 = FILL_AREA_STYLE_COLOUR('',#523847); +#524214 = OVER_RIDING_STYLED_ITEM('overriding color',(#524215),#38412, + #524051); +#524215 = PRESENTATION_STYLE_ASSIGNMENT((#524216)); +#524216 = SURFACE_STYLE_USAGE(.BOTH.,#524217); +#524217 = SURFACE_SIDE_STYLE('',(#524218)); +#524218 = SURFACE_STYLE_FILL_AREA(#524219); +#524219 = FILL_AREA_STYLE('',(#524220)); +#524220 = FILL_AREA_STYLE_COLOUR('',#523847); +#524221 = OVER_RIDING_STYLED_ITEM('overriding color',(#524222),#38436, + #524051); +#524222 = PRESENTATION_STYLE_ASSIGNMENT((#524223)); +#524223 = SURFACE_STYLE_USAGE(.BOTH.,#524224); +#524224 = SURFACE_SIDE_STYLE('',(#524225)); +#524225 = SURFACE_STYLE_FILL_AREA(#524226); +#524226 = FILL_AREA_STYLE('',(#524227)); +#524227 = FILL_AREA_STYLE_COLOUR('',#523847); +#524228 = OVER_RIDING_STYLED_ITEM('overriding color',(#524229),#38460, + #524051); +#524229 = PRESENTATION_STYLE_ASSIGNMENT((#524230)); +#524230 = SURFACE_STYLE_USAGE(.BOTH.,#524231); +#524231 = SURFACE_SIDE_STYLE('',(#524232)); +#524232 = SURFACE_STYLE_FILL_AREA(#524233); +#524233 = FILL_AREA_STYLE('',(#524234)); +#524234 = FILL_AREA_STYLE_COLOUR('',#523847); +#524235 = OVER_RIDING_STYLED_ITEM('overriding color',(#524236),#38484, + #524051); +#524236 = PRESENTATION_STYLE_ASSIGNMENT((#524237)); +#524237 = SURFACE_STYLE_USAGE(.BOTH.,#524238); +#524238 = SURFACE_SIDE_STYLE('',(#524239)); +#524239 = SURFACE_STYLE_FILL_AREA(#524240); +#524240 = FILL_AREA_STYLE('',(#524241)); +#524241 = FILL_AREA_STYLE_COLOUR('',#523847); +#524242 = OVER_RIDING_STYLED_ITEM('overriding color',(#524243),#38508, + #524051); +#524243 = PRESENTATION_STYLE_ASSIGNMENT((#524244)); +#524244 = SURFACE_STYLE_USAGE(.BOTH.,#524245); +#524245 = SURFACE_SIDE_STYLE('',(#524246)); +#524246 = SURFACE_STYLE_FILL_AREA(#524247); +#524247 = FILL_AREA_STYLE('',(#524248)); +#524248 = FILL_AREA_STYLE_COLOUR('',#523847); +#524249 = OVER_RIDING_STYLED_ITEM('overriding color',(#524250),#38532, + #524051); +#524250 = PRESENTATION_STYLE_ASSIGNMENT((#524251)); +#524251 = SURFACE_STYLE_USAGE(.BOTH.,#524252); +#524252 = SURFACE_SIDE_STYLE('',(#524253)); +#524253 = SURFACE_STYLE_FILL_AREA(#524254); +#524254 = FILL_AREA_STYLE('',(#524255)); +#524255 = FILL_AREA_STYLE_COLOUR('',#523847); +#524256 = OVER_RIDING_STYLED_ITEM('overriding color',(#524257),#38556, + #524051); +#524257 = PRESENTATION_STYLE_ASSIGNMENT((#524258)); +#524258 = SURFACE_STYLE_USAGE(.BOTH.,#524259); +#524259 = SURFACE_SIDE_STYLE('',(#524260)); +#524260 = SURFACE_STYLE_FILL_AREA(#524261); +#524261 = FILL_AREA_STYLE('',(#524262)); +#524262 = FILL_AREA_STYLE_COLOUR('',#523847); +#524263 = OVER_RIDING_STYLED_ITEM('overriding color',(#524264),#38580, + #524051); +#524264 = PRESENTATION_STYLE_ASSIGNMENT((#524265)); +#524265 = SURFACE_STYLE_USAGE(.BOTH.,#524266); +#524266 = SURFACE_SIDE_STYLE('',(#524267)); +#524267 = SURFACE_STYLE_FILL_AREA(#524268); +#524268 = FILL_AREA_STYLE('',(#524269)); +#524269 = FILL_AREA_STYLE_COLOUR('',#523847); +#524270 = OVER_RIDING_STYLED_ITEM('overriding color',(#524271),#38611, + #524051); +#524271 = PRESENTATION_STYLE_ASSIGNMENT((#524272)); +#524272 = SURFACE_STYLE_USAGE(.BOTH.,#524273); +#524273 = SURFACE_SIDE_STYLE('',(#524274)); +#524274 = SURFACE_STYLE_FILL_AREA(#524275); +#524275 = FILL_AREA_STYLE('',(#524276)); +#524276 = FILL_AREA_STYLE_COLOUR('',#523847); +#524277 = OVER_RIDING_STYLED_ITEM('overriding color',(#524278),#38642, + #524051); +#524278 = PRESENTATION_STYLE_ASSIGNMENT((#524279)); +#524279 = SURFACE_STYLE_USAGE(.BOTH.,#524280); +#524280 = SURFACE_SIDE_STYLE('',(#524281)); +#524281 = SURFACE_STYLE_FILL_AREA(#524282); +#524282 = FILL_AREA_STYLE('',(#524283)); +#524283 = FILL_AREA_STYLE_COLOUR('',#523847); +#524284 = OVER_RIDING_STYLED_ITEM('overriding color',(#524285),#38666, + #524051); +#524285 = PRESENTATION_STYLE_ASSIGNMENT((#524286)); +#524286 = SURFACE_STYLE_USAGE(.BOTH.,#524287); +#524287 = SURFACE_SIDE_STYLE('',(#524288)); +#524288 = SURFACE_STYLE_FILL_AREA(#524289); +#524289 = FILL_AREA_STYLE('',(#524290)); +#524290 = FILL_AREA_STYLE_COLOUR('',#523847); +#524291 = OVER_RIDING_STYLED_ITEM('overriding color',(#524292),#38690, + #524051); +#524292 = PRESENTATION_STYLE_ASSIGNMENT((#524293)); +#524293 = SURFACE_STYLE_USAGE(.BOTH.,#524294); +#524294 = SURFACE_SIDE_STYLE('',(#524295)); +#524295 = SURFACE_STYLE_FILL_AREA(#524296); +#524296 = FILL_AREA_STYLE('',(#524297)); +#524297 = FILL_AREA_STYLE_COLOUR('',#523847); +#524298 = OVER_RIDING_STYLED_ITEM('overriding color',(#524299),#38714, + #524051); +#524299 = PRESENTATION_STYLE_ASSIGNMENT((#524300)); +#524300 = SURFACE_STYLE_USAGE(.BOTH.,#524301); +#524301 = SURFACE_SIDE_STYLE('',(#524302)); +#524302 = SURFACE_STYLE_FILL_AREA(#524303); +#524303 = FILL_AREA_STYLE('',(#524304)); +#524304 = FILL_AREA_STYLE_COLOUR('',#523847); +#524305 = OVER_RIDING_STYLED_ITEM('overriding color',(#524306),#38738, + #524051); +#524306 = PRESENTATION_STYLE_ASSIGNMENT((#524307)); +#524307 = SURFACE_STYLE_USAGE(.BOTH.,#524308); +#524308 = SURFACE_SIDE_STYLE('',(#524309)); +#524309 = SURFACE_STYLE_FILL_AREA(#524310); +#524310 = FILL_AREA_STYLE('',(#524311)); +#524311 = FILL_AREA_STYLE_COLOUR('',#523847); +#524312 = OVER_RIDING_STYLED_ITEM('overriding color',(#524313),#38762, + #524051); +#524313 = PRESENTATION_STYLE_ASSIGNMENT((#524314)); +#524314 = SURFACE_STYLE_USAGE(.BOTH.,#524315); +#524315 = SURFACE_SIDE_STYLE('',(#524316)); +#524316 = SURFACE_STYLE_FILL_AREA(#524317); +#524317 = FILL_AREA_STYLE('',(#524318)); +#524318 = FILL_AREA_STYLE_COLOUR('',#523847); +#524319 = OVER_RIDING_STYLED_ITEM('overriding color',(#524320),#38786, + #524051); +#524320 = PRESENTATION_STYLE_ASSIGNMENT((#524321)); +#524321 = SURFACE_STYLE_USAGE(.BOTH.,#524322); +#524322 = SURFACE_SIDE_STYLE('',(#524323)); +#524323 = SURFACE_STYLE_FILL_AREA(#524324); +#524324 = FILL_AREA_STYLE('',(#524325)); +#524325 = FILL_AREA_STYLE_COLOUR('',#523847); +#524326 = OVER_RIDING_STYLED_ITEM('overriding color',(#524327),#38810, + #524051); +#524327 = PRESENTATION_STYLE_ASSIGNMENT((#524328)); +#524328 = SURFACE_STYLE_USAGE(.BOTH.,#524329); +#524329 = SURFACE_SIDE_STYLE('',(#524330)); +#524330 = SURFACE_STYLE_FILL_AREA(#524331); +#524331 = FILL_AREA_STYLE('',(#524332)); +#524332 = FILL_AREA_STYLE_COLOUR('',#523847); +#524333 = OVER_RIDING_STYLED_ITEM('overriding color',(#524334),#38834, + #524051); +#524334 = PRESENTATION_STYLE_ASSIGNMENT((#524335)); +#524335 = SURFACE_STYLE_USAGE(.BOTH.,#524336); +#524336 = SURFACE_SIDE_STYLE('',(#524337)); +#524337 = SURFACE_STYLE_FILL_AREA(#524338); +#524338 = FILL_AREA_STYLE('',(#524339)); +#524339 = FILL_AREA_STYLE_COLOUR('',#523847); +#524340 = OVER_RIDING_STYLED_ITEM('overriding color',(#524341),#38858, + #524051); +#524341 = PRESENTATION_STYLE_ASSIGNMENT((#524342)); +#524342 = SURFACE_STYLE_USAGE(.BOTH.,#524343); +#524343 = SURFACE_SIDE_STYLE('',(#524344)); +#524344 = SURFACE_STYLE_FILL_AREA(#524345); +#524345 = FILL_AREA_STYLE('',(#524346)); +#524346 = FILL_AREA_STYLE_COLOUR('',#523847); +#524347 = OVER_RIDING_STYLED_ITEM('overriding color',(#524348),#38882, + #524051); +#524348 = PRESENTATION_STYLE_ASSIGNMENT((#524349)); +#524349 = SURFACE_STYLE_USAGE(.BOTH.,#524350); +#524350 = SURFACE_SIDE_STYLE('',(#524351)); +#524351 = SURFACE_STYLE_FILL_AREA(#524352); +#524352 = FILL_AREA_STYLE('',(#524353)); +#524353 = FILL_AREA_STYLE_COLOUR('',#523847); +#524354 = OVER_RIDING_STYLED_ITEM('overriding color',(#524355),#38913, + #524051); +#524355 = PRESENTATION_STYLE_ASSIGNMENT((#524356)); +#524356 = SURFACE_STYLE_USAGE(.BOTH.,#524357); +#524357 = SURFACE_SIDE_STYLE('',(#524358)); +#524358 = SURFACE_STYLE_FILL_AREA(#524359); +#524359 = FILL_AREA_STYLE('',(#524360)); +#524360 = FILL_AREA_STYLE_COLOUR('',#523847); +#524361 = OVER_RIDING_STYLED_ITEM('overriding color',(#524362),#38944, + #524051); +#524362 = PRESENTATION_STYLE_ASSIGNMENT((#524363)); +#524363 = SURFACE_STYLE_USAGE(.BOTH.,#524364); +#524364 = SURFACE_SIDE_STYLE('',(#524365)); +#524365 = SURFACE_STYLE_FILL_AREA(#524366); +#524366 = FILL_AREA_STYLE('',(#524367)); +#524367 = FILL_AREA_STYLE_COLOUR('',#523847); +#524368 = OVER_RIDING_STYLED_ITEM('overriding color',(#524369),#38968, + #524051); +#524369 = PRESENTATION_STYLE_ASSIGNMENT((#524370)); +#524370 = SURFACE_STYLE_USAGE(.BOTH.,#524371); +#524371 = SURFACE_SIDE_STYLE('',(#524372)); +#524372 = SURFACE_STYLE_FILL_AREA(#524373); +#524373 = FILL_AREA_STYLE('',(#524374)); +#524374 = FILL_AREA_STYLE_COLOUR('',#523847); +#524375 = OVER_RIDING_STYLED_ITEM('overriding color',(#524376),#38992, + #524051); +#524376 = PRESENTATION_STYLE_ASSIGNMENT((#524377)); +#524377 = SURFACE_STYLE_USAGE(.BOTH.,#524378); +#524378 = SURFACE_SIDE_STYLE('',(#524379)); +#524379 = SURFACE_STYLE_FILL_AREA(#524380); +#524380 = FILL_AREA_STYLE('',(#524381)); +#524381 = FILL_AREA_STYLE_COLOUR('',#523847); +#524382 = OVER_RIDING_STYLED_ITEM('overriding color',(#524383),#39016, + #524051); +#524383 = PRESENTATION_STYLE_ASSIGNMENT((#524384)); +#524384 = SURFACE_STYLE_USAGE(.BOTH.,#524385); +#524385 = SURFACE_SIDE_STYLE('',(#524386)); +#524386 = SURFACE_STYLE_FILL_AREA(#524387); +#524387 = FILL_AREA_STYLE('',(#524388)); +#524388 = FILL_AREA_STYLE_COLOUR('',#523847); +#524389 = OVER_RIDING_STYLED_ITEM('overriding color',(#524390),#39040, + #524051); +#524390 = PRESENTATION_STYLE_ASSIGNMENT((#524391)); +#524391 = SURFACE_STYLE_USAGE(.BOTH.,#524392); +#524392 = SURFACE_SIDE_STYLE('',(#524393)); +#524393 = SURFACE_STYLE_FILL_AREA(#524394); +#524394 = FILL_AREA_STYLE('',(#524395)); +#524395 = FILL_AREA_STYLE_COLOUR('',#523847); +#524396 = OVER_RIDING_STYLED_ITEM('overriding color',(#524397),#39064, + #524051); +#524397 = PRESENTATION_STYLE_ASSIGNMENT((#524398)); +#524398 = SURFACE_STYLE_USAGE(.BOTH.,#524399); +#524399 = SURFACE_SIDE_STYLE('',(#524400)); +#524400 = SURFACE_STYLE_FILL_AREA(#524401); +#524401 = FILL_AREA_STYLE('',(#524402)); +#524402 = FILL_AREA_STYLE_COLOUR('',#523847); +#524403 = OVER_RIDING_STYLED_ITEM('overriding color',(#524404),#39088, + #524051); +#524404 = PRESENTATION_STYLE_ASSIGNMENT((#524405)); +#524405 = SURFACE_STYLE_USAGE(.BOTH.,#524406); +#524406 = SURFACE_SIDE_STYLE('',(#524407)); +#524407 = SURFACE_STYLE_FILL_AREA(#524408); +#524408 = FILL_AREA_STYLE('',(#524409)); +#524409 = FILL_AREA_STYLE_COLOUR('',#523847); +#524410 = OVER_RIDING_STYLED_ITEM('overriding color',(#524411),#39112, + #524051); +#524411 = PRESENTATION_STYLE_ASSIGNMENT((#524412)); +#524412 = SURFACE_STYLE_USAGE(.BOTH.,#524413); +#524413 = SURFACE_SIDE_STYLE('',(#524414)); +#524414 = SURFACE_STYLE_FILL_AREA(#524415); +#524415 = FILL_AREA_STYLE('',(#524416)); +#524416 = FILL_AREA_STYLE_COLOUR('',#523847); +#524417 = OVER_RIDING_STYLED_ITEM('overriding color',(#524418),#39136, + #524051); +#524418 = PRESENTATION_STYLE_ASSIGNMENT((#524419)); +#524419 = SURFACE_STYLE_USAGE(.BOTH.,#524420); +#524420 = SURFACE_SIDE_STYLE('',(#524421)); +#524421 = SURFACE_STYLE_FILL_AREA(#524422); +#524422 = FILL_AREA_STYLE('',(#524423)); +#524423 = FILL_AREA_STYLE_COLOUR('',#523847); +#524424 = OVER_RIDING_STYLED_ITEM('overriding color',(#524425),#39160, + #524051); +#524425 = PRESENTATION_STYLE_ASSIGNMENT((#524426)); +#524426 = SURFACE_STYLE_USAGE(.BOTH.,#524427); +#524427 = SURFACE_SIDE_STYLE('',(#524428)); +#524428 = SURFACE_STYLE_FILL_AREA(#524429); +#524429 = FILL_AREA_STYLE('',(#524430)); +#524430 = FILL_AREA_STYLE_COLOUR('',#523847); +#524431 = OVER_RIDING_STYLED_ITEM('overriding color',(#524432),#39184, + #524051); +#524432 = PRESENTATION_STYLE_ASSIGNMENT((#524433)); +#524433 = SURFACE_STYLE_USAGE(.BOTH.,#524434); +#524434 = SURFACE_SIDE_STYLE('',(#524435)); +#524435 = SURFACE_STYLE_FILL_AREA(#524436); +#524436 = FILL_AREA_STYLE('',(#524437)); +#524437 = FILL_AREA_STYLE_COLOUR('',#523847); +#524438 = OVER_RIDING_STYLED_ITEM('overriding color',(#524439),#39215, + #524051); +#524439 = PRESENTATION_STYLE_ASSIGNMENT((#524440)); +#524440 = SURFACE_STYLE_USAGE(.BOTH.,#524441); +#524441 = SURFACE_SIDE_STYLE('',(#524442)); +#524442 = SURFACE_STYLE_FILL_AREA(#524443); +#524443 = FILL_AREA_STYLE('',(#524444)); +#524444 = FILL_AREA_STYLE_COLOUR('',#523847); +#524445 = OVER_RIDING_STYLED_ITEM('overriding color',(#524446),#39246, + #524051); +#524446 = PRESENTATION_STYLE_ASSIGNMENT((#524447)); +#524447 = SURFACE_STYLE_USAGE(.BOTH.,#524448); +#524448 = SURFACE_SIDE_STYLE('',(#524449)); +#524449 = SURFACE_STYLE_FILL_AREA(#524450); +#524450 = FILL_AREA_STYLE('',(#524451)); +#524451 = FILL_AREA_STYLE_COLOUR('',#523847); +#524452 = OVER_RIDING_STYLED_ITEM('overriding color',(#524453),#39270, + #524051); +#524453 = PRESENTATION_STYLE_ASSIGNMENT((#524454)); +#524454 = SURFACE_STYLE_USAGE(.BOTH.,#524455); +#524455 = SURFACE_SIDE_STYLE('',(#524456)); +#524456 = SURFACE_STYLE_FILL_AREA(#524457); +#524457 = FILL_AREA_STYLE('',(#524458)); +#524458 = FILL_AREA_STYLE_COLOUR('',#523847); +#524459 = OVER_RIDING_STYLED_ITEM('overriding color',(#524460),#39294, + #524051); +#524460 = PRESENTATION_STYLE_ASSIGNMENT((#524461)); +#524461 = SURFACE_STYLE_USAGE(.BOTH.,#524462); +#524462 = SURFACE_SIDE_STYLE('',(#524463)); +#524463 = SURFACE_STYLE_FILL_AREA(#524464); +#524464 = FILL_AREA_STYLE('',(#524465)); +#524465 = FILL_AREA_STYLE_COLOUR('',#523847); +#524466 = OVER_RIDING_STYLED_ITEM('overriding color',(#524467),#39318, + #524051); +#524467 = PRESENTATION_STYLE_ASSIGNMENT((#524468)); +#524468 = SURFACE_STYLE_USAGE(.BOTH.,#524469); +#524469 = SURFACE_SIDE_STYLE('',(#524470)); +#524470 = SURFACE_STYLE_FILL_AREA(#524471); +#524471 = FILL_AREA_STYLE('',(#524472)); +#524472 = FILL_AREA_STYLE_COLOUR('',#523847); +#524473 = OVER_RIDING_STYLED_ITEM('overriding color',(#524474),#39342, + #524051); +#524474 = PRESENTATION_STYLE_ASSIGNMENT((#524475)); +#524475 = SURFACE_STYLE_USAGE(.BOTH.,#524476); +#524476 = SURFACE_SIDE_STYLE('',(#524477)); +#524477 = SURFACE_STYLE_FILL_AREA(#524478); +#524478 = FILL_AREA_STYLE('',(#524479)); +#524479 = FILL_AREA_STYLE_COLOUR('',#523847); +#524480 = OVER_RIDING_STYLED_ITEM('overriding color',(#524481),#39366, + #524051); +#524481 = PRESENTATION_STYLE_ASSIGNMENT((#524482)); +#524482 = SURFACE_STYLE_USAGE(.BOTH.,#524483); +#524483 = SURFACE_SIDE_STYLE('',(#524484)); +#524484 = SURFACE_STYLE_FILL_AREA(#524485); +#524485 = FILL_AREA_STYLE('',(#524486)); +#524486 = FILL_AREA_STYLE_COLOUR('',#523847); +#524487 = OVER_RIDING_STYLED_ITEM('overriding color',(#524488),#39390, + #524051); +#524488 = PRESENTATION_STYLE_ASSIGNMENT((#524489)); +#524489 = SURFACE_STYLE_USAGE(.BOTH.,#524490); +#524490 = SURFACE_SIDE_STYLE('',(#524491)); +#524491 = SURFACE_STYLE_FILL_AREA(#524492); +#524492 = FILL_AREA_STYLE('',(#524493)); +#524493 = FILL_AREA_STYLE_COLOUR('',#523847); +#524494 = OVER_RIDING_STYLED_ITEM('overriding color',(#524495),#39414, + #524051); +#524495 = PRESENTATION_STYLE_ASSIGNMENT((#524496)); +#524496 = SURFACE_STYLE_USAGE(.BOTH.,#524497); +#524497 = SURFACE_SIDE_STYLE('',(#524498)); +#524498 = SURFACE_STYLE_FILL_AREA(#524499); +#524499 = FILL_AREA_STYLE('',(#524500)); +#524500 = FILL_AREA_STYLE_COLOUR('',#523847); +#524501 = OVER_RIDING_STYLED_ITEM('overriding color',(#524502),#39438, + #524051); +#524502 = PRESENTATION_STYLE_ASSIGNMENT((#524503)); +#524503 = SURFACE_STYLE_USAGE(.BOTH.,#524504); +#524504 = SURFACE_SIDE_STYLE('',(#524505)); +#524505 = SURFACE_STYLE_FILL_AREA(#524506); +#524506 = FILL_AREA_STYLE('',(#524507)); +#524507 = FILL_AREA_STYLE_COLOUR('',#523847); +#524508 = OVER_RIDING_STYLED_ITEM('overriding color',(#524509),#39462, + #524051); +#524509 = PRESENTATION_STYLE_ASSIGNMENT((#524510)); +#524510 = SURFACE_STYLE_USAGE(.BOTH.,#524511); +#524511 = SURFACE_SIDE_STYLE('',(#524512)); +#524512 = SURFACE_STYLE_FILL_AREA(#524513); +#524513 = FILL_AREA_STYLE('',(#524514)); +#524514 = FILL_AREA_STYLE_COLOUR('',#523847); +#524515 = OVER_RIDING_STYLED_ITEM('overriding color',(#524516),#39486, + #524051); +#524516 = PRESENTATION_STYLE_ASSIGNMENT((#524517)); +#524517 = SURFACE_STYLE_USAGE(.BOTH.,#524518); +#524518 = SURFACE_SIDE_STYLE('',(#524519)); +#524519 = SURFACE_STYLE_FILL_AREA(#524520); +#524520 = FILL_AREA_STYLE('',(#524521)); +#524521 = FILL_AREA_STYLE_COLOUR('',#523847); +#524522 = OVER_RIDING_STYLED_ITEM('overriding color',(#524523),#39517, + #524051); +#524523 = PRESENTATION_STYLE_ASSIGNMENT((#524524)); +#524524 = SURFACE_STYLE_USAGE(.BOTH.,#524525); +#524525 = SURFACE_SIDE_STYLE('',(#524526)); +#524526 = SURFACE_STYLE_FILL_AREA(#524527); +#524527 = FILL_AREA_STYLE('',(#524528)); +#524528 = FILL_AREA_STYLE_COLOUR('',#523847); +#524529 = OVER_RIDING_STYLED_ITEM('overriding color',(#524530),#39548, + #524051); +#524530 = PRESENTATION_STYLE_ASSIGNMENT((#524531)); +#524531 = SURFACE_STYLE_USAGE(.BOTH.,#524532); +#524532 = SURFACE_SIDE_STYLE('',(#524533)); +#524533 = SURFACE_STYLE_FILL_AREA(#524534); +#524534 = FILL_AREA_STYLE('',(#524535)); +#524535 = FILL_AREA_STYLE_COLOUR('',#523847); +#524536 = OVER_RIDING_STYLED_ITEM('overriding color',(#524537),#39572, + #524051); +#524537 = PRESENTATION_STYLE_ASSIGNMENT((#524538)); +#524538 = SURFACE_STYLE_USAGE(.BOTH.,#524539); +#524539 = SURFACE_SIDE_STYLE('',(#524540)); +#524540 = SURFACE_STYLE_FILL_AREA(#524541); +#524541 = FILL_AREA_STYLE('',(#524542)); +#524542 = FILL_AREA_STYLE_COLOUR('',#523847); +#524543 = OVER_RIDING_STYLED_ITEM('overriding color',(#524544),#39596, + #524051); +#524544 = PRESENTATION_STYLE_ASSIGNMENT((#524545)); +#524545 = SURFACE_STYLE_USAGE(.BOTH.,#524546); +#524546 = SURFACE_SIDE_STYLE('',(#524547)); +#524547 = SURFACE_STYLE_FILL_AREA(#524548); +#524548 = FILL_AREA_STYLE('',(#524549)); +#524549 = FILL_AREA_STYLE_COLOUR('',#523847); +#524550 = OVER_RIDING_STYLED_ITEM('overriding color',(#524551),#39620, + #524051); +#524551 = PRESENTATION_STYLE_ASSIGNMENT((#524552)); +#524552 = SURFACE_STYLE_USAGE(.BOTH.,#524553); +#524553 = SURFACE_SIDE_STYLE('',(#524554)); +#524554 = SURFACE_STYLE_FILL_AREA(#524555); +#524555 = FILL_AREA_STYLE('',(#524556)); +#524556 = FILL_AREA_STYLE_COLOUR('',#523847); +#524557 = OVER_RIDING_STYLED_ITEM('overriding color',(#524558),#39644, + #524051); +#524558 = PRESENTATION_STYLE_ASSIGNMENT((#524559)); +#524559 = SURFACE_STYLE_USAGE(.BOTH.,#524560); +#524560 = SURFACE_SIDE_STYLE('',(#524561)); +#524561 = SURFACE_STYLE_FILL_AREA(#524562); +#524562 = FILL_AREA_STYLE('',(#524563)); +#524563 = FILL_AREA_STYLE_COLOUR('',#523847); +#524564 = OVER_RIDING_STYLED_ITEM('overriding color',(#524565),#39668, + #524051); +#524565 = PRESENTATION_STYLE_ASSIGNMENT((#524566)); +#524566 = SURFACE_STYLE_USAGE(.BOTH.,#524567); +#524567 = SURFACE_SIDE_STYLE('',(#524568)); +#524568 = SURFACE_STYLE_FILL_AREA(#524569); +#524569 = FILL_AREA_STYLE('',(#524570)); +#524570 = FILL_AREA_STYLE_COLOUR('',#523847); +#524571 = OVER_RIDING_STYLED_ITEM('overriding color',(#524572),#39692, + #524051); +#524572 = PRESENTATION_STYLE_ASSIGNMENT((#524573)); +#524573 = SURFACE_STYLE_USAGE(.BOTH.,#524574); +#524574 = SURFACE_SIDE_STYLE('',(#524575)); +#524575 = SURFACE_STYLE_FILL_AREA(#524576); +#524576 = FILL_AREA_STYLE('',(#524577)); +#524577 = FILL_AREA_STYLE_COLOUR('',#523847); +#524578 = OVER_RIDING_STYLED_ITEM('overriding color',(#524579),#39716, + #524051); +#524579 = PRESENTATION_STYLE_ASSIGNMENT((#524580)); +#524580 = SURFACE_STYLE_USAGE(.BOTH.,#524581); +#524581 = SURFACE_SIDE_STYLE('',(#524582)); +#524582 = SURFACE_STYLE_FILL_AREA(#524583); +#524583 = FILL_AREA_STYLE('',(#524584)); +#524584 = FILL_AREA_STYLE_COLOUR('',#523847); +#524585 = OVER_RIDING_STYLED_ITEM('overriding color',(#524586),#39740, + #524051); +#524586 = PRESENTATION_STYLE_ASSIGNMENT((#524587)); +#524587 = SURFACE_STYLE_USAGE(.BOTH.,#524588); +#524588 = SURFACE_SIDE_STYLE('',(#524589)); +#524589 = SURFACE_STYLE_FILL_AREA(#524590); +#524590 = FILL_AREA_STYLE('',(#524591)); +#524591 = FILL_AREA_STYLE_COLOUR('',#523847); +#524592 = OVER_RIDING_STYLED_ITEM('overriding color',(#524593),#39764, + #524051); +#524593 = PRESENTATION_STYLE_ASSIGNMENT((#524594)); +#524594 = SURFACE_STYLE_USAGE(.BOTH.,#524595); +#524595 = SURFACE_SIDE_STYLE('',(#524596)); +#524596 = SURFACE_STYLE_FILL_AREA(#524597); +#524597 = FILL_AREA_STYLE('',(#524598)); +#524598 = FILL_AREA_STYLE_COLOUR('',#523847); +#524599 = OVER_RIDING_STYLED_ITEM('overriding color',(#524600),#39788, + #524051); +#524600 = PRESENTATION_STYLE_ASSIGNMENT((#524601)); +#524601 = SURFACE_STYLE_USAGE(.BOTH.,#524602); +#524602 = SURFACE_SIDE_STYLE('',(#524603)); +#524603 = SURFACE_STYLE_FILL_AREA(#524604); +#524604 = FILL_AREA_STYLE('',(#524605)); +#524605 = FILL_AREA_STYLE_COLOUR('',#523847); +#524606 = OVER_RIDING_STYLED_ITEM('overriding color',(#524607),#39819, + #524051); +#524607 = PRESENTATION_STYLE_ASSIGNMENT((#524608)); +#524608 = SURFACE_STYLE_USAGE(.BOTH.,#524609); +#524609 = SURFACE_SIDE_STYLE('',(#524610)); +#524610 = SURFACE_STYLE_FILL_AREA(#524611); +#524611 = FILL_AREA_STYLE('',(#524612)); +#524612 = FILL_AREA_STYLE_COLOUR('',#523847); +#524613 = OVER_RIDING_STYLED_ITEM('overriding color',(#524614),#39850, + #524051); +#524614 = PRESENTATION_STYLE_ASSIGNMENT((#524615)); +#524615 = SURFACE_STYLE_USAGE(.BOTH.,#524616); +#524616 = SURFACE_SIDE_STYLE('',(#524617)); +#524617 = SURFACE_STYLE_FILL_AREA(#524618); +#524618 = FILL_AREA_STYLE('',(#524619)); +#524619 = FILL_AREA_STYLE_COLOUR('',#523847); +#524620 = OVER_RIDING_STYLED_ITEM('overriding color',(#524621),#39874, + #524051); +#524621 = PRESENTATION_STYLE_ASSIGNMENT((#524622)); +#524622 = SURFACE_STYLE_USAGE(.BOTH.,#524623); +#524623 = SURFACE_SIDE_STYLE('',(#524624)); +#524624 = SURFACE_STYLE_FILL_AREA(#524625); +#524625 = FILL_AREA_STYLE('',(#524626)); +#524626 = FILL_AREA_STYLE_COLOUR('',#523847); +#524627 = OVER_RIDING_STYLED_ITEM('overriding color',(#524628),#39898, + #524051); +#524628 = PRESENTATION_STYLE_ASSIGNMENT((#524629)); +#524629 = SURFACE_STYLE_USAGE(.BOTH.,#524630); +#524630 = SURFACE_SIDE_STYLE('',(#524631)); +#524631 = SURFACE_STYLE_FILL_AREA(#524632); +#524632 = FILL_AREA_STYLE('',(#524633)); +#524633 = FILL_AREA_STYLE_COLOUR('',#523847); +#524634 = OVER_RIDING_STYLED_ITEM('overriding color',(#524635),#39922, + #524051); +#524635 = PRESENTATION_STYLE_ASSIGNMENT((#524636)); +#524636 = SURFACE_STYLE_USAGE(.BOTH.,#524637); +#524637 = SURFACE_SIDE_STYLE('',(#524638)); +#524638 = SURFACE_STYLE_FILL_AREA(#524639); +#524639 = FILL_AREA_STYLE('',(#524640)); +#524640 = FILL_AREA_STYLE_COLOUR('',#523847); +#524641 = OVER_RIDING_STYLED_ITEM('overriding color',(#524642),#39946, + #524051); +#524642 = PRESENTATION_STYLE_ASSIGNMENT((#524643)); +#524643 = SURFACE_STYLE_USAGE(.BOTH.,#524644); +#524644 = SURFACE_SIDE_STYLE('',(#524645)); +#524645 = SURFACE_STYLE_FILL_AREA(#524646); +#524646 = FILL_AREA_STYLE('',(#524647)); +#524647 = FILL_AREA_STYLE_COLOUR('',#523847); +#524648 = OVER_RIDING_STYLED_ITEM('overriding color',(#524649),#39970, + #524051); +#524649 = PRESENTATION_STYLE_ASSIGNMENT((#524650)); +#524650 = SURFACE_STYLE_USAGE(.BOTH.,#524651); +#524651 = SURFACE_SIDE_STYLE('',(#524652)); +#524652 = SURFACE_STYLE_FILL_AREA(#524653); +#524653 = FILL_AREA_STYLE('',(#524654)); +#524654 = FILL_AREA_STYLE_COLOUR('',#523847); +#524655 = OVER_RIDING_STYLED_ITEM('overriding color',(#524656),#39994, + #524051); +#524656 = PRESENTATION_STYLE_ASSIGNMENT((#524657)); +#524657 = SURFACE_STYLE_USAGE(.BOTH.,#524658); +#524658 = SURFACE_SIDE_STYLE('',(#524659)); +#524659 = SURFACE_STYLE_FILL_AREA(#524660); +#524660 = FILL_AREA_STYLE('',(#524661)); +#524661 = FILL_AREA_STYLE_COLOUR('',#523847); +#524662 = OVER_RIDING_STYLED_ITEM('overriding color',(#524663),#40018, + #524051); +#524663 = PRESENTATION_STYLE_ASSIGNMENT((#524664)); +#524664 = SURFACE_STYLE_USAGE(.BOTH.,#524665); +#524665 = SURFACE_SIDE_STYLE('',(#524666)); +#524666 = SURFACE_STYLE_FILL_AREA(#524667); +#524667 = FILL_AREA_STYLE('',(#524668)); +#524668 = FILL_AREA_STYLE_COLOUR('',#523847); +#524669 = OVER_RIDING_STYLED_ITEM('overriding color',(#524670),#40042, + #524051); +#524670 = PRESENTATION_STYLE_ASSIGNMENT((#524671)); +#524671 = SURFACE_STYLE_USAGE(.BOTH.,#524672); +#524672 = SURFACE_SIDE_STYLE('',(#524673)); +#524673 = SURFACE_STYLE_FILL_AREA(#524674); +#524674 = FILL_AREA_STYLE('',(#524675)); +#524675 = FILL_AREA_STYLE_COLOUR('',#523847); +#524676 = OVER_RIDING_STYLED_ITEM('overriding color',(#524677),#40066, + #524051); +#524677 = PRESENTATION_STYLE_ASSIGNMENT((#524678)); +#524678 = SURFACE_STYLE_USAGE(.BOTH.,#524679); +#524679 = SURFACE_SIDE_STYLE('',(#524680)); +#524680 = SURFACE_STYLE_FILL_AREA(#524681); +#524681 = FILL_AREA_STYLE('',(#524682)); +#524682 = FILL_AREA_STYLE_COLOUR('',#523847); +#524683 = OVER_RIDING_STYLED_ITEM('overriding color',(#524684),#40090, + #524051); +#524684 = PRESENTATION_STYLE_ASSIGNMENT((#524685)); +#524685 = SURFACE_STYLE_USAGE(.BOTH.,#524686); +#524686 = SURFACE_SIDE_STYLE('',(#524687)); +#524687 = SURFACE_STYLE_FILL_AREA(#524688); +#524688 = FILL_AREA_STYLE('',(#524689)); +#524689 = FILL_AREA_STYLE_COLOUR('',#523847); +#524690 = OVER_RIDING_STYLED_ITEM('overriding color',(#524691),#40121, + #524051); +#524691 = PRESENTATION_STYLE_ASSIGNMENT((#524692)); +#524692 = SURFACE_STYLE_USAGE(.BOTH.,#524693); +#524693 = SURFACE_SIDE_STYLE('',(#524694)); +#524694 = SURFACE_STYLE_FILL_AREA(#524695); +#524695 = FILL_AREA_STYLE('',(#524696)); +#524696 = FILL_AREA_STYLE_COLOUR('',#523847); +#524697 = OVER_RIDING_STYLED_ITEM('overriding color',(#524698),#40152, + #524051); +#524698 = PRESENTATION_STYLE_ASSIGNMENT((#524699)); +#524699 = SURFACE_STYLE_USAGE(.BOTH.,#524700); +#524700 = SURFACE_SIDE_STYLE('',(#524701)); +#524701 = SURFACE_STYLE_FILL_AREA(#524702); +#524702 = FILL_AREA_STYLE('',(#524703)); +#524703 = FILL_AREA_STYLE_COLOUR('',#523847); +#524704 = OVER_RIDING_STYLED_ITEM('overriding color',(#524705),#40176, + #524051); +#524705 = PRESENTATION_STYLE_ASSIGNMENT((#524706)); +#524706 = SURFACE_STYLE_USAGE(.BOTH.,#524707); +#524707 = SURFACE_SIDE_STYLE('',(#524708)); +#524708 = SURFACE_STYLE_FILL_AREA(#524709); +#524709 = FILL_AREA_STYLE('',(#524710)); +#524710 = FILL_AREA_STYLE_COLOUR('',#523847); +#524711 = OVER_RIDING_STYLED_ITEM('overriding color',(#524712),#40200, + #524051); +#524712 = PRESENTATION_STYLE_ASSIGNMENT((#524713)); +#524713 = SURFACE_STYLE_USAGE(.BOTH.,#524714); +#524714 = SURFACE_SIDE_STYLE('',(#524715)); +#524715 = SURFACE_STYLE_FILL_AREA(#524716); +#524716 = FILL_AREA_STYLE('',(#524717)); +#524717 = FILL_AREA_STYLE_COLOUR('',#523847); +#524718 = OVER_RIDING_STYLED_ITEM('overriding color',(#524719),#40224, + #524051); +#524719 = PRESENTATION_STYLE_ASSIGNMENT((#524720)); +#524720 = SURFACE_STYLE_USAGE(.BOTH.,#524721); +#524721 = SURFACE_SIDE_STYLE('',(#524722)); +#524722 = SURFACE_STYLE_FILL_AREA(#524723); +#524723 = FILL_AREA_STYLE('',(#524724)); +#524724 = FILL_AREA_STYLE_COLOUR('',#523847); +#524725 = OVER_RIDING_STYLED_ITEM('overriding color',(#524726),#40248, + #524051); +#524726 = PRESENTATION_STYLE_ASSIGNMENT((#524727)); +#524727 = SURFACE_STYLE_USAGE(.BOTH.,#524728); +#524728 = SURFACE_SIDE_STYLE('',(#524729)); +#524729 = SURFACE_STYLE_FILL_AREA(#524730); +#524730 = FILL_AREA_STYLE('',(#524731)); +#524731 = FILL_AREA_STYLE_COLOUR('',#523847); +#524732 = OVER_RIDING_STYLED_ITEM('overriding color',(#524733),#40272, + #524051); +#524733 = PRESENTATION_STYLE_ASSIGNMENT((#524734)); +#524734 = SURFACE_STYLE_USAGE(.BOTH.,#524735); +#524735 = SURFACE_SIDE_STYLE('',(#524736)); +#524736 = SURFACE_STYLE_FILL_AREA(#524737); +#524737 = FILL_AREA_STYLE('',(#524738)); +#524738 = FILL_AREA_STYLE_COLOUR('',#523847); +#524739 = OVER_RIDING_STYLED_ITEM('overriding color',(#524740),#40296, + #524051); +#524740 = PRESENTATION_STYLE_ASSIGNMENT((#524741)); +#524741 = SURFACE_STYLE_USAGE(.BOTH.,#524742); +#524742 = SURFACE_SIDE_STYLE('',(#524743)); +#524743 = SURFACE_STYLE_FILL_AREA(#524744); +#524744 = FILL_AREA_STYLE('',(#524745)); +#524745 = FILL_AREA_STYLE_COLOUR('',#523847); +#524746 = OVER_RIDING_STYLED_ITEM('overriding color',(#524747),#40320, + #524051); +#524747 = PRESENTATION_STYLE_ASSIGNMENT((#524748)); +#524748 = SURFACE_STYLE_USAGE(.BOTH.,#524749); +#524749 = SURFACE_SIDE_STYLE('',(#524750)); +#524750 = SURFACE_STYLE_FILL_AREA(#524751); +#524751 = FILL_AREA_STYLE('',(#524752)); +#524752 = FILL_AREA_STYLE_COLOUR('',#523847); +#524753 = OVER_RIDING_STYLED_ITEM('overriding color',(#524754),#40344, + #524051); +#524754 = PRESENTATION_STYLE_ASSIGNMENT((#524755)); +#524755 = SURFACE_STYLE_USAGE(.BOTH.,#524756); +#524756 = SURFACE_SIDE_STYLE('',(#524757)); +#524757 = SURFACE_STYLE_FILL_AREA(#524758); +#524758 = FILL_AREA_STYLE('',(#524759)); +#524759 = FILL_AREA_STYLE_COLOUR('',#523847); +#524760 = OVER_RIDING_STYLED_ITEM('overriding color',(#524761),#40368, + #524051); +#524761 = PRESENTATION_STYLE_ASSIGNMENT((#524762)); +#524762 = SURFACE_STYLE_USAGE(.BOTH.,#524763); +#524763 = SURFACE_SIDE_STYLE('',(#524764)); +#524764 = SURFACE_STYLE_FILL_AREA(#524765); +#524765 = FILL_AREA_STYLE('',(#524766)); +#524766 = FILL_AREA_STYLE_COLOUR('',#523847); +#524767 = OVER_RIDING_STYLED_ITEM('overriding color',(#524768),#40392, + #524051); +#524768 = PRESENTATION_STYLE_ASSIGNMENT((#524769)); +#524769 = SURFACE_STYLE_USAGE(.BOTH.,#524770); +#524770 = SURFACE_SIDE_STYLE('',(#524771)); +#524771 = SURFACE_STYLE_FILL_AREA(#524772); +#524772 = FILL_AREA_STYLE('',(#524773)); +#524773 = FILL_AREA_STYLE_COLOUR('',#523847); +#524774 = OVER_RIDING_STYLED_ITEM('overriding color',(#524775),#40423, + #524051); +#524775 = PRESENTATION_STYLE_ASSIGNMENT((#524776)); +#524776 = SURFACE_STYLE_USAGE(.BOTH.,#524777); +#524777 = SURFACE_SIDE_STYLE('',(#524778)); +#524778 = SURFACE_STYLE_FILL_AREA(#524779); +#524779 = FILL_AREA_STYLE('',(#524780)); +#524780 = FILL_AREA_STYLE_COLOUR('',#523847); +#524781 = OVER_RIDING_STYLED_ITEM('overriding color',(#524782),#40454, + #524051); +#524782 = PRESENTATION_STYLE_ASSIGNMENT((#524783)); +#524783 = SURFACE_STYLE_USAGE(.BOTH.,#524784); +#524784 = SURFACE_SIDE_STYLE('',(#524785)); +#524785 = SURFACE_STYLE_FILL_AREA(#524786); +#524786 = FILL_AREA_STYLE('',(#524787)); +#524787 = FILL_AREA_STYLE_COLOUR('',#523847); +#524788 = OVER_RIDING_STYLED_ITEM('overriding color',(#524789),#40478, + #524051); +#524789 = PRESENTATION_STYLE_ASSIGNMENT((#524790)); +#524790 = SURFACE_STYLE_USAGE(.BOTH.,#524791); +#524791 = SURFACE_SIDE_STYLE('',(#524792)); +#524792 = SURFACE_STYLE_FILL_AREA(#524793); +#524793 = FILL_AREA_STYLE('',(#524794)); +#524794 = FILL_AREA_STYLE_COLOUR('',#523847); +#524795 = OVER_RIDING_STYLED_ITEM('overriding color',(#524796),#40502, + #524051); +#524796 = PRESENTATION_STYLE_ASSIGNMENT((#524797)); +#524797 = SURFACE_STYLE_USAGE(.BOTH.,#524798); +#524798 = SURFACE_SIDE_STYLE('',(#524799)); +#524799 = SURFACE_STYLE_FILL_AREA(#524800); +#524800 = FILL_AREA_STYLE('',(#524801)); +#524801 = FILL_AREA_STYLE_COLOUR('',#523847); +#524802 = OVER_RIDING_STYLED_ITEM('overriding color',(#524803),#40526, + #524051); +#524803 = PRESENTATION_STYLE_ASSIGNMENT((#524804)); +#524804 = SURFACE_STYLE_USAGE(.BOTH.,#524805); +#524805 = SURFACE_SIDE_STYLE('',(#524806)); +#524806 = SURFACE_STYLE_FILL_AREA(#524807); +#524807 = FILL_AREA_STYLE('',(#524808)); +#524808 = FILL_AREA_STYLE_COLOUR('',#523847); +#524809 = OVER_RIDING_STYLED_ITEM('overriding color',(#524810),#40550, + #524051); +#524810 = PRESENTATION_STYLE_ASSIGNMENT((#524811)); +#524811 = SURFACE_STYLE_USAGE(.BOTH.,#524812); +#524812 = SURFACE_SIDE_STYLE('',(#524813)); +#524813 = SURFACE_STYLE_FILL_AREA(#524814); +#524814 = FILL_AREA_STYLE('',(#524815)); +#524815 = FILL_AREA_STYLE_COLOUR('',#523847); +#524816 = OVER_RIDING_STYLED_ITEM('overriding color',(#524817),#40574, + #524051); +#524817 = PRESENTATION_STYLE_ASSIGNMENT((#524818)); +#524818 = SURFACE_STYLE_USAGE(.BOTH.,#524819); +#524819 = SURFACE_SIDE_STYLE('',(#524820)); +#524820 = SURFACE_STYLE_FILL_AREA(#524821); +#524821 = FILL_AREA_STYLE('',(#524822)); +#524822 = FILL_AREA_STYLE_COLOUR('',#523847); +#524823 = OVER_RIDING_STYLED_ITEM('overriding color',(#524824),#40598, + #524051); +#524824 = PRESENTATION_STYLE_ASSIGNMENT((#524825)); +#524825 = SURFACE_STYLE_USAGE(.BOTH.,#524826); +#524826 = SURFACE_SIDE_STYLE('',(#524827)); +#524827 = SURFACE_STYLE_FILL_AREA(#524828); +#524828 = FILL_AREA_STYLE('',(#524829)); +#524829 = FILL_AREA_STYLE_COLOUR('',#523847); +#524830 = OVER_RIDING_STYLED_ITEM('overriding color',(#524831),#40622, + #524051); +#524831 = PRESENTATION_STYLE_ASSIGNMENT((#524832)); +#524832 = SURFACE_STYLE_USAGE(.BOTH.,#524833); +#524833 = SURFACE_SIDE_STYLE('',(#524834)); +#524834 = SURFACE_STYLE_FILL_AREA(#524835); +#524835 = FILL_AREA_STYLE('',(#524836)); +#524836 = FILL_AREA_STYLE_COLOUR('',#523847); +#524837 = OVER_RIDING_STYLED_ITEM('overriding color',(#524838),#40646, + #524051); +#524838 = PRESENTATION_STYLE_ASSIGNMENT((#524839)); +#524839 = SURFACE_STYLE_USAGE(.BOTH.,#524840); +#524840 = SURFACE_SIDE_STYLE('',(#524841)); +#524841 = SURFACE_STYLE_FILL_AREA(#524842); +#524842 = FILL_AREA_STYLE('',(#524843)); +#524843 = FILL_AREA_STYLE_COLOUR('',#523847); +#524844 = OVER_RIDING_STYLED_ITEM('overriding color',(#524845),#40670, + #524051); +#524845 = PRESENTATION_STYLE_ASSIGNMENT((#524846)); +#524846 = SURFACE_STYLE_USAGE(.BOTH.,#524847); +#524847 = SURFACE_SIDE_STYLE('',(#524848)); +#524848 = SURFACE_STYLE_FILL_AREA(#524849); +#524849 = FILL_AREA_STYLE('',(#524850)); +#524850 = FILL_AREA_STYLE_COLOUR('',#523847); +#524851 = OVER_RIDING_STYLED_ITEM('overriding color',(#524852),#40694, + #524051); +#524852 = PRESENTATION_STYLE_ASSIGNMENT((#524853)); +#524853 = SURFACE_STYLE_USAGE(.BOTH.,#524854); +#524854 = SURFACE_SIDE_STYLE('',(#524855)); +#524855 = SURFACE_STYLE_FILL_AREA(#524856); +#524856 = FILL_AREA_STYLE('',(#524857)); +#524857 = FILL_AREA_STYLE_COLOUR('',#523847); +#524858 = OVER_RIDING_STYLED_ITEM('overriding color',(#524859),#40725, + #524051); +#524859 = PRESENTATION_STYLE_ASSIGNMENT((#524860)); +#524860 = SURFACE_STYLE_USAGE(.BOTH.,#524861); +#524861 = SURFACE_SIDE_STYLE('',(#524862)); +#524862 = SURFACE_STYLE_FILL_AREA(#524863); +#524863 = FILL_AREA_STYLE('',(#524864)); +#524864 = FILL_AREA_STYLE_COLOUR('',#523847); +#524865 = OVER_RIDING_STYLED_ITEM('overriding color',(#524866),#40756, + #524051); +#524866 = PRESENTATION_STYLE_ASSIGNMENT((#524867)); +#524867 = SURFACE_STYLE_USAGE(.BOTH.,#524868); +#524868 = SURFACE_SIDE_STYLE('',(#524869)); +#524869 = SURFACE_STYLE_FILL_AREA(#524870); +#524870 = FILL_AREA_STYLE('',(#524871)); +#524871 = FILL_AREA_STYLE_COLOUR('',#523847); +#524872 = OVER_RIDING_STYLED_ITEM('overriding color',(#524873),#40780, + #524051); +#524873 = PRESENTATION_STYLE_ASSIGNMENT((#524874)); +#524874 = SURFACE_STYLE_USAGE(.BOTH.,#524875); +#524875 = SURFACE_SIDE_STYLE('',(#524876)); +#524876 = SURFACE_STYLE_FILL_AREA(#524877); +#524877 = FILL_AREA_STYLE('',(#524878)); +#524878 = FILL_AREA_STYLE_COLOUR('',#523847); +#524879 = OVER_RIDING_STYLED_ITEM('overriding color',(#524880),#40804, + #524051); +#524880 = PRESENTATION_STYLE_ASSIGNMENT((#524881)); +#524881 = SURFACE_STYLE_USAGE(.BOTH.,#524882); +#524882 = SURFACE_SIDE_STYLE('',(#524883)); +#524883 = SURFACE_STYLE_FILL_AREA(#524884); +#524884 = FILL_AREA_STYLE('',(#524885)); +#524885 = FILL_AREA_STYLE_COLOUR('',#523847); +#524886 = OVER_RIDING_STYLED_ITEM('overriding color',(#524887),#40828, + #524051); +#524887 = PRESENTATION_STYLE_ASSIGNMENT((#524888)); +#524888 = SURFACE_STYLE_USAGE(.BOTH.,#524889); +#524889 = SURFACE_SIDE_STYLE('',(#524890)); +#524890 = SURFACE_STYLE_FILL_AREA(#524891); +#524891 = FILL_AREA_STYLE('',(#524892)); +#524892 = FILL_AREA_STYLE_COLOUR('',#523847); +#524893 = OVER_RIDING_STYLED_ITEM('overriding color',(#524894),#40852, + #524051); +#524894 = PRESENTATION_STYLE_ASSIGNMENT((#524895)); +#524895 = SURFACE_STYLE_USAGE(.BOTH.,#524896); +#524896 = SURFACE_SIDE_STYLE('',(#524897)); +#524897 = SURFACE_STYLE_FILL_AREA(#524898); +#524898 = FILL_AREA_STYLE('',(#524899)); +#524899 = FILL_AREA_STYLE_COLOUR('',#523847); +#524900 = OVER_RIDING_STYLED_ITEM('overriding color',(#524901),#40876, + #524051); +#524901 = PRESENTATION_STYLE_ASSIGNMENT((#524902)); +#524902 = SURFACE_STYLE_USAGE(.BOTH.,#524903); +#524903 = SURFACE_SIDE_STYLE('',(#524904)); +#524904 = SURFACE_STYLE_FILL_AREA(#524905); +#524905 = FILL_AREA_STYLE('',(#524906)); +#524906 = FILL_AREA_STYLE_COLOUR('',#523847); +#524907 = OVER_RIDING_STYLED_ITEM('overriding color',(#524908),#40900, + #524051); +#524908 = PRESENTATION_STYLE_ASSIGNMENT((#524909)); +#524909 = SURFACE_STYLE_USAGE(.BOTH.,#524910); +#524910 = SURFACE_SIDE_STYLE('',(#524911)); +#524911 = SURFACE_STYLE_FILL_AREA(#524912); +#524912 = FILL_AREA_STYLE('',(#524913)); +#524913 = FILL_AREA_STYLE_COLOUR('',#523847); +#524914 = OVER_RIDING_STYLED_ITEM('overriding color',(#524915),#40924, + #524051); +#524915 = PRESENTATION_STYLE_ASSIGNMENT((#524916)); +#524916 = SURFACE_STYLE_USAGE(.BOTH.,#524917); +#524917 = SURFACE_SIDE_STYLE('',(#524918)); +#524918 = SURFACE_STYLE_FILL_AREA(#524919); +#524919 = FILL_AREA_STYLE('',(#524920)); +#524920 = FILL_AREA_STYLE_COLOUR('',#523847); +#524921 = OVER_RIDING_STYLED_ITEM('overriding color',(#524922),#40948, + #524051); +#524922 = PRESENTATION_STYLE_ASSIGNMENT((#524923)); +#524923 = SURFACE_STYLE_USAGE(.BOTH.,#524924); +#524924 = SURFACE_SIDE_STYLE('',(#524925)); +#524925 = SURFACE_STYLE_FILL_AREA(#524926); +#524926 = FILL_AREA_STYLE('',(#524927)); +#524927 = FILL_AREA_STYLE_COLOUR('',#523847); +#524928 = OVER_RIDING_STYLED_ITEM('overriding color',(#524929),#40972, + #524051); +#524929 = PRESENTATION_STYLE_ASSIGNMENT((#524930)); +#524930 = SURFACE_STYLE_USAGE(.BOTH.,#524931); +#524931 = SURFACE_SIDE_STYLE('',(#524932)); +#524932 = SURFACE_STYLE_FILL_AREA(#524933); +#524933 = FILL_AREA_STYLE('',(#524934)); +#524934 = FILL_AREA_STYLE_COLOUR('',#523847); +#524935 = OVER_RIDING_STYLED_ITEM('overriding color',(#524936),#40996, + #524051); +#524936 = PRESENTATION_STYLE_ASSIGNMENT((#524937)); +#524937 = SURFACE_STYLE_USAGE(.BOTH.,#524938); +#524938 = SURFACE_SIDE_STYLE('',(#524939)); +#524939 = SURFACE_STYLE_FILL_AREA(#524940); +#524940 = FILL_AREA_STYLE('',(#524941)); +#524941 = FILL_AREA_STYLE_COLOUR('',#523847); +#524942 = OVER_RIDING_STYLED_ITEM('overriding color',(#524943),#41027, + #524051); +#524943 = PRESENTATION_STYLE_ASSIGNMENT((#524944)); +#524944 = SURFACE_STYLE_USAGE(.BOTH.,#524945); +#524945 = SURFACE_SIDE_STYLE('',(#524946)); +#524946 = SURFACE_STYLE_FILL_AREA(#524947); +#524947 = FILL_AREA_STYLE('',(#524948)); +#524948 = FILL_AREA_STYLE_COLOUR('',#523847); +#524949 = OVER_RIDING_STYLED_ITEM('overriding color',(#524950),#41058, + #524051); +#524950 = PRESENTATION_STYLE_ASSIGNMENT((#524951)); +#524951 = SURFACE_STYLE_USAGE(.BOTH.,#524952); +#524952 = SURFACE_SIDE_STYLE('',(#524953)); +#524953 = SURFACE_STYLE_FILL_AREA(#524954); +#524954 = FILL_AREA_STYLE('',(#524955)); +#524955 = FILL_AREA_STYLE_COLOUR('',#523847); +#524956 = OVER_RIDING_STYLED_ITEM('overriding color',(#524957),#41082, + #524051); +#524957 = PRESENTATION_STYLE_ASSIGNMENT((#524958)); +#524958 = SURFACE_STYLE_USAGE(.BOTH.,#524959); +#524959 = SURFACE_SIDE_STYLE('',(#524960)); +#524960 = SURFACE_STYLE_FILL_AREA(#524961); +#524961 = FILL_AREA_STYLE('',(#524962)); +#524962 = FILL_AREA_STYLE_COLOUR('',#523847); +#524963 = OVER_RIDING_STYLED_ITEM('overriding color',(#524964),#41106, + #524051); +#524964 = PRESENTATION_STYLE_ASSIGNMENT((#524965)); +#524965 = SURFACE_STYLE_USAGE(.BOTH.,#524966); +#524966 = SURFACE_SIDE_STYLE('',(#524967)); +#524967 = SURFACE_STYLE_FILL_AREA(#524968); +#524968 = FILL_AREA_STYLE('',(#524969)); +#524969 = FILL_AREA_STYLE_COLOUR('',#523847); +#524970 = OVER_RIDING_STYLED_ITEM('overriding color',(#524971),#41130, + #524051); +#524971 = PRESENTATION_STYLE_ASSIGNMENT((#524972)); +#524972 = SURFACE_STYLE_USAGE(.BOTH.,#524973); +#524973 = SURFACE_SIDE_STYLE('',(#524974)); +#524974 = SURFACE_STYLE_FILL_AREA(#524975); +#524975 = FILL_AREA_STYLE('',(#524976)); +#524976 = FILL_AREA_STYLE_COLOUR('',#523847); +#524977 = OVER_RIDING_STYLED_ITEM('overriding color',(#524978),#41154, + #524051); +#524978 = PRESENTATION_STYLE_ASSIGNMENT((#524979)); +#524979 = SURFACE_STYLE_USAGE(.BOTH.,#524980); +#524980 = SURFACE_SIDE_STYLE('',(#524981)); +#524981 = SURFACE_STYLE_FILL_AREA(#524982); +#524982 = FILL_AREA_STYLE('',(#524983)); +#524983 = FILL_AREA_STYLE_COLOUR('',#523847); +#524984 = OVER_RIDING_STYLED_ITEM('overriding color',(#524985),#41178, + #524051); +#524985 = PRESENTATION_STYLE_ASSIGNMENT((#524986)); +#524986 = SURFACE_STYLE_USAGE(.BOTH.,#524987); +#524987 = SURFACE_SIDE_STYLE('',(#524988)); +#524988 = SURFACE_STYLE_FILL_AREA(#524989); +#524989 = FILL_AREA_STYLE('',(#524990)); +#524990 = FILL_AREA_STYLE_COLOUR('',#523847); +#524991 = OVER_RIDING_STYLED_ITEM('overriding color',(#524992),#41202, + #524051); +#524992 = PRESENTATION_STYLE_ASSIGNMENT((#524993)); +#524993 = SURFACE_STYLE_USAGE(.BOTH.,#524994); +#524994 = SURFACE_SIDE_STYLE('',(#524995)); +#524995 = SURFACE_STYLE_FILL_AREA(#524996); +#524996 = FILL_AREA_STYLE('',(#524997)); +#524997 = FILL_AREA_STYLE_COLOUR('',#523847); +#524998 = OVER_RIDING_STYLED_ITEM('overriding color',(#524999),#41226, + #524051); +#524999 = PRESENTATION_STYLE_ASSIGNMENT((#525000)); +#525000 = SURFACE_STYLE_USAGE(.BOTH.,#525001); +#525001 = SURFACE_SIDE_STYLE('',(#525002)); +#525002 = SURFACE_STYLE_FILL_AREA(#525003); +#525003 = FILL_AREA_STYLE('',(#525004)); +#525004 = FILL_AREA_STYLE_COLOUR('',#523847); +#525005 = OVER_RIDING_STYLED_ITEM('overriding color',(#525006),#41250, + #524051); +#525006 = PRESENTATION_STYLE_ASSIGNMENT((#525007)); +#525007 = SURFACE_STYLE_USAGE(.BOTH.,#525008); +#525008 = SURFACE_SIDE_STYLE('',(#525009)); +#525009 = SURFACE_STYLE_FILL_AREA(#525010); +#525010 = FILL_AREA_STYLE('',(#525011)); +#525011 = FILL_AREA_STYLE_COLOUR('',#523847); +#525012 = OVER_RIDING_STYLED_ITEM('overriding color',(#525013),#41274, + #524051); +#525013 = PRESENTATION_STYLE_ASSIGNMENT((#525014)); +#525014 = SURFACE_STYLE_USAGE(.BOTH.,#525015); +#525015 = SURFACE_SIDE_STYLE('',(#525016)); +#525016 = SURFACE_STYLE_FILL_AREA(#525017); +#525017 = FILL_AREA_STYLE('',(#525018)); +#525018 = FILL_AREA_STYLE_COLOUR('',#523847); +#525019 = OVER_RIDING_STYLED_ITEM('overriding color',(#525020),#41298, + #524051); +#525020 = PRESENTATION_STYLE_ASSIGNMENT((#525021)); +#525021 = SURFACE_STYLE_USAGE(.BOTH.,#525022); +#525022 = SURFACE_SIDE_STYLE('',(#525023)); +#525023 = SURFACE_STYLE_FILL_AREA(#525024); +#525024 = FILL_AREA_STYLE('',(#525025)); +#525025 = FILL_AREA_STYLE_COLOUR('',#523847); +#525026 = OVER_RIDING_STYLED_ITEM('overriding color',(#525027),#41329, + #524051); +#525027 = PRESENTATION_STYLE_ASSIGNMENT((#525028)); +#525028 = SURFACE_STYLE_USAGE(.BOTH.,#525029); +#525029 = SURFACE_SIDE_STYLE('',(#525030)); +#525030 = SURFACE_STYLE_FILL_AREA(#525031); +#525031 = FILL_AREA_STYLE('',(#525032)); +#525032 = FILL_AREA_STYLE_COLOUR('',#523847); +#525033 = OVER_RIDING_STYLED_ITEM('overriding color',(#525034),#41360, + #524051); +#525034 = PRESENTATION_STYLE_ASSIGNMENT((#525035)); +#525035 = SURFACE_STYLE_USAGE(.BOTH.,#525036); +#525036 = SURFACE_SIDE_STYLE('',(#525037)); +#525037 = SURFACE_STYLE_FILL_AREA(#525038); +#525038 = FILL_AREA_STYLE('',(#525039)); +#525039 = FILL_AREA_STYLE_COLOUR('',#523847); +#525040 = OVER_RIDING_STYLED_ITEM('overriding color',(#525041),#41384, + #524051); +#525041 = PRESENTATION_STYLE_ASSIGNMENT((#525042)); +#525042 = SURFACE_STYLE_USAGE(.BOTH.,#525043); +#525043 = SURFACE_SIDE_STYLE('',(#525044)); +#525044 = SURFACE_STYLE_FILL_AREA(#525045); +#525045 = FILL_AREA_STYLE('',(#525046)); +#525046 = FILL_AREA_STYLE_COLOUR('',#523847); +#525047 = OVER_RIDING_STYLED_ITEM('overriding color',(#525048),#41408, + #524051); +#525048 = PRESENTATION_STYLE_ASSIGNMENT((#525049)); +#525049 = SURFACE_STYLE_USAGE(.BOTH.,#525050); +#525050 = SURFACE_SIDE_STYLE('',(#525051)); +#525051 = SURFACE_STYLE_FILL_AREA(#525052); +#525052 = FILL_AREA_STYLE('',(#525053)); +#525053 = FILL_AREA_STYLE_COLOUR('',#523847); +#525054 = OVER_RIDING_STYLED_ITEM('overriding color',(#525055),#41432, + #524051); +#525055 = PRESENTATION_STYLE_ASSIGNMENT((#525056)); +#525056 = SURFACE_STYLE_USAGE(.BOTH.,#525057); +#525057 = SURFACE_SIDE_STYLE('',(#525058)); +#525058 = SURFACE_STYLE_FILL_AREA(#525059); +#525059 = FILL_AREA_STYLE('',(#525060)); +#525060 = FILL_AREA_STYLE_COLOUR('',#523847); +#525061 = OVER_RIDING_STYLED_ITEM('overriding color',(#525062),#41456, + #524051); +#525062 = PRESENTATION_STYLE_ASSIGNMENT((#525063)); +#525063 = SURFACE_STYLE_USAGE(.BOTH.,#525064); +#525064 = SURFACE_SIDE_STYLE('',(#525065)); +#525065 = SURFACE_STYLE_FILL_AREA(#525066); +#525066 = FILL_AREA_STYLE('',(#525067)); +#525067 = FILL_AREA_STYLE_COLOUR('',#523847); +#525068 = OVER_RIDING_STYLED_ITEM('overriding color',(#525069),#41480, + #524051); +#525069 = PRESENTATION_STYLE_ASSIGNMENT((#525070)); +#525070 = SURFACE_STYLE_USAGE(.BOTH.,#525071); +#525071 = SURFACE_SIDE_STYLE('',(#525072)); +#525072 = SURFACE_STYLE_FILL_AREA(#525073); +#525073 = FILL_AREA_STYLE('',(#525074)); +#525074 = FILL_AREA_STYLE_COLOUR('',#523847); +#525075 = OVER_RIDING_STYLED_ITEM('overriding color',(#525076),#41504, + #524051); +#525076 = PRESENTATION_STYLE_ASSIGNMENT((#525077)); +#525077 = SURFACE_STYLE_USAGE(.BOTH.,#525078); +#525078 = SURFACE_SIDE_STYLE('',(#525079)); +#525079 = SURFACE_STYLE_FILL_AREA(#525080); +#525080 = FILL_AREA_STYLE('',(#525081)); +#525081 = FILL_AREA_STYLE_COLOUR('',#523847); +#525082 = OVER_RIDING_STYLED_ITEM('overriding color',(#525083),#41528, + #524051); +#525083 = PRESENTATION_STYLE_ASSIGNMENT((#525084)); +#525084 = SURFACE_STYLE_USAGE(.BOTH.,#525085); +#525085 = SURFACE_SIDE_STYLE('',(#525086)); +#525086 = SURFACE_STYLE_FILL_AREA(#525087); +#525087 = FILL_AREA_STYLE('',(#525088)); +#525088 = FILL_AREA_STYLE_COLOUR('',#523847); +#525089 = OVER_RIDING_STYLED_ITEM('overriding color',(#525090),#41552, + #524051); +#525090 = PRESENTATION_STYLE_ASSIGNMENT((#525091)); +#525091 = SURFACE_STYLE_USAGE(.BOTH.,#525092); +#525092 = SURFACE_SIDE_STYLE('',(#525093)); +#525093 = SURFACE_STYLE_FILL_AREA(#525094); +#525094 = FILL_AREA_STYLE('',(#525095)); +#525095 = FILL_AREA_STYLE_COLOUR('',#523847); +#525096 = OVER_RIDING_STYLED_ITEM('overriding color',(#525097),#41576, + #524051); +#525097 = PRESENTATION_STYLE_ASSIGNMENT((#525098)); +#525098 = SURFACE_STYLE_USAGE(.BOTH.,#525099); +#525099 = SURFACE_SIDE_STYLE('',(#525100)); +#525100 = SURFACE_STYLE_FILL_AREA(#525101); +#525101 = FILL_AREA_STYLE('',(#525102)); +#525102 = FILL_AREA_STYLE_COLOUR('',#523847); +#525103 = OVER_RIDING_STYLED_ITEM('overriding color',(#525104),#41600, + #524051); +#525104 = PRESENTATION_STYLE_ASSIGNMENT((#525105)); +#525105 = SURFACE_STYLE_USAGE(.BOTH.,#525106); +#525106 = SURFACE_SIDE_STYLE('',(#525107)); +#525107 = SURFACE_STYLE_FILL_AREA(#525108); +#525108 = FILL_AREA_STYLE('',(#525109)); +#525109 = FILL_AREA_STYLE_COLOUR('',#523847); +#525110 = OVER_RIDING_STYLED_ITEM('overriding color',(#525111),#41631, + #524051); +#525111 = PRESENTATION_STYLE_ASSIGNMENT((#525112)); +#525112 = SURFACE_STYLE_USAGE(.BOTH.,#525113); +#525113 = SURFACE_SIDE_STYLE('',(#525114)); +#525114 = SURFACE_STYLE_FILL_AREA(#525115); +#525115 = FILL_AREA_STYLE('',(#525116)); +#525116 = FILL_AREA_STYLE_COLOUR('',#523847); +#525117 = OVER_RIDING_STYLED_ITEM('overriding color',(#525118),#41662, + #524051); +#525118 = PRESENTATION_STYLE_ASSIGNMENT((#525119)); +#525119 = SURFACE_STYLE_USAGE(.BOTH.,#525120); +#525120 = SURFACE_SIDE_STYLE('',(#525121)); +#525121 = SURFACE_STYLE_FILL_AREA(#525122); +#525122 = FILL_AREA_STYLE('',(#525123)); +#525123 = FILL_AREA_STYLE_COLOUR('',#523847); +#525124 = OVER_RIDING_STYLED_ITEM('overriding color',(#525125),#41686, + #524051); +#525125 = PRESENTATION_STYLE_ASSIGNMENT((#525126)); +#525126 = SURFACE_STYLE_USAGE(.BOTH.,#525127); +#525127 = SURFACE_SIDE_STYLE('',(#525128)); +#525128 = SURFACE_STYLE_FILL_AREA(#525129); +#525129 = FILL_AREA_STYLE('',(#525130)); +#525130 = FILL_AREA_STYLE_COLOUR('',#523847); +#525131 = OVER_RIDING_STYLED_ITEM('overriding color',(#525132),#41710, + #524051); +#525132 = PRESENTATION_STYLE_ASSIGNMENT((#525133)); +#525133 = SURFACE_STYLE_USAGE(.BOTH.,#525134); +#525134 = SURFACE_SIDE_STYLE('',(#525135)); +#525135 = SURFACE_STYLE_FILL_AREA(#525136); +#525136 = FILL_AREA_STYLE('',(#525137)); +#525137 = FILL_AREA_STYLE_COLOUR('',#523847); +#525138 = OVER_RIDING_STYLED_ITEM('overriding color',(#525139),#41734, + #524051); +#525139 = PRESENTATION_STYLE_ASSIGNMENT((#525140)); +#525140 = SURFACE_STYLE_USAGE(.BOTH.,#525141); +#525141 = SURFACE_SIDE_STYLE('',(#525142)); +#525142 = SURFACE_STYLE_FILL_AREA(#525143); +#525143 = FILL_AREA_STYLE('',(#525144)); +#525144 = FILL_AREA_STYLE_COLOUR('',#523847); +#525145 = OVER_RIDING_STYLED_ITEM('overriding color',(#525146),#41758, + #524051); +#525146 = PRESENTATION_STYLE_ASSIGNMENT((#525147)); +#525147 = SURFACE_STYLE_USAGE(.BOTH.,#525148); +#525148 = SURFACE_SIDE_STYLE('',(#525149)); +#525149 = SURFACE_STYLE_FILL_AREA(#525150); +#525150 = FILL_AREA_STYLE('',(#525151)); +#525151 = FILL_AREA_STYLE_COLOUR('',#523847); +#525152 = OVER_RIDING_STYLED_ITEM('overriding color',(#525153),#41782, + #524051); +#525153 = PRESENTATION_STYLE_ASSIGNMENT((#525154)); +#525154 = SURFACE_STYLE_USAGE(.BOTH.,#525155); +#525155 = SURFACE_SIDE_STYLE('',(#525156)); +#525156 = SURFACE_STYLE_FILL_AREA(#525157); +#525157 = FILL_AREA_STYLE('',(#525158)); +#525158 = FILL_AREA_STYLE_COLOUR('',#523847); +#525159 = OVER_RIDING_STYLED_ITEM('overriding color',(#525160),#41806, + #524051); +#525160 = PRESENTATION_STYLE_ASSIGNMENT((#525161)); +#525161 = SURFACE_STYLE_USAGE(.BOTH.,#525162); +#525162 = SURFACE_SIDE_STYLE('',(#525163)); +#525163 = SURFACE_STYLE_FILL_AREA(#525164); +#525164 = FILL_AREA_STYLE('',(#525165)); +#525165 = FILL_AREA_STYLE_COLOUR('',#523847); +#525166 = OVER_RIDING_STYLED_ITEM('overriding color',(#525167),#41830, + #524051); +#525167 = PRESENTATION_STYLE_ASSIGNMENT((#525168)); +#525168 = SURFACE_STYLE_USAGE(.BOTH.,#525169); +#525169 = SURFACE_SIDE_STYLE('',(#525170)); +#525170 = SURFACE_STYLE_FILL_AREA(#525171); +#525171 = FILL_AREA_STYLE('',(#525172)); +#525172 = FILL_AREA_STYLE_COLOUR('',#523847); +#525173 = OVER_RIDING_STYLED_ITEM('overriding color',(#525174),#41854, + #524051); +#525174 = PRESENTATION_STYLE_ASSIGNMENT((#525175)); +#525175 = SURFACE_STYLE_USAGE(.BOTH.,#525176); +#525176 = SURFACE_SIDE_STYLE('',(#525177)); +#525177 = SURFACE_STYLE_FILL_AREA(#525178); +#525178 = FILL_AREA_STYLE('',(#525179)); +#525179 = FILL_AREA_STYLE_COLOUR('',#523847); +#525180 = OVER_RIDING_STYLED_ITEM('overriding color',(#525181),#41878, + #524051); +#525181 = PRESENTATION_STYLE_ASSIGNMENT((#525182)); +#525182 = SURFACE_STYLE_USAGE(.BOTH.,#525183); +#525183 = SURFACE_SIDE_STYLE('',(#525184)); +#525184 = SURFACE_STYLE_FILL_AREA(#525185); +#525185 = FILL_AREA_STYLE('',(#525186)); +#525186 = FILL_AREA_STYLE_COLOUR('',#523847); +#525187 = OVER_RIDING_STYLED_ITEM('overriding color',(#525188),#41902, + #524051); +#525188 = PRESENTATION_STYLE_ASSIGNMENT((#525189)); +#525189 = SURFACE_STYLE_USAGE(.BOTH.,#525190); +#525190 = SURFACE_SIDE_STYLE('',(#525191)); +#525191 = SURFACE_STYLE_FILL_AREA(#525192); +#525192 = FILL_AREA_STYLE('',(#525193)); +#525193 = FILL_AREA_STYLE_COLOUR('',#523847); +#525194 = OVER_RIDING_STYLED_ITEM('overriding color',(#525195),#41933, + #524051); +#525195 = PRESENTATION_STYLE_ASSIGNMENT((#525196)); +#525196 = SURFACE_STYLE_USAGE(.BOTH.,#525197); +#525197 = SURFACE_SIDE_STYLE('',(#525198)); +#525198 = SURFACE_STYLE_FILL_AREA(#525199); +#525199 = FILL_AREA_STYLE('',(#525200)); +#525200 = FILL_AREA_STYLE_COLOUR('',#523847); +#525201 = OVER_RIDING_STYLED_ITEM('overriding color',(#525202),#41964, + #524051); +#525202 = PRESENTATION_STYLE_ASSIGNMENT((#525203)); +#525203 = SURFACE_STYLE_USAGE(.BOTH.,#525204); +#525204 = SURFACE_SIDE_STYLE('',(#525205)); +#525205 = SURFACE_STYLE_FILL_AREA(#525206); +#525206 = FILL_AREA_STYLE('',(#525207)); +#525207 = FILL_AREA_STYLE_COLOUR('',#523847); +#525208 = OVER_RIDING_STYLED_ITEM('overriding color',(#525209),#41988, + #524051); +#525209 = PRESENTATION_STYLE_ASSIGNMENT((#525210)); +#525210 = SURFACE_STYLE_USAGE(.BOTH.,#525211); +#525211 = SURFACE_SIDE_STYLE('',(#525212)); +#525212 = SURFACE_STYLE_FILL_AREA(#525213); +#525213 = FILL_AREA_STYLE('',(#525214)); +#525214 = FILL_AREA_STYLE_COLOUR('',#523847); +#525215 = OVER_RIDING_STYLED_ITEM('overriding color',(#525216),#42012, + #524051); +#525216 = PRESENTATION_STYLE_ASSIGNMENT((#525217)); +#525217 = SURFACE_STYLE_USAGE(.BOTH.,#525218); +#525218 = SURFACE_SIDE_STYLE('',(#525219)); +#525219 = SURFACE_STYLE_FILL_AREA(#525220); +#525220 = FILL_AREA_STYLE('',(#525221)); +#525221 = FILL_AREA_STYLE_COLOUR('',#523847); +#525222 = OVER_RIDING_STYLED_ITEM('overriding color',(#525223),#42036, + #524051); +#525223 = PRESENTATION_STYLE_ASSIGNMENT((#525224)); +#525224 = SURFACE_STYLE_USAGE(.BOTH.,#525225); +#525225 = SURFACE_SIDE_STYLE('',(#525226)); +#525226 = SURFACE_STYLE_FILL_AREA(#525227); +#525227 = FILL_AREA_STYLE('',(#525228)); +#525228 = FILL_AREA_STYLE_COLOUR('',#523847); +#525229 = OVER_RIDING_STYLED_ITEM('overriding color',(#525230),#42060, + #524051); +#525230 = PRESENTATION_STYLE_ASSIGNMENT((#525231)); +#525231 = SURFACE_STYLE_USAGE(.BOTH.,#525232); +#525232 = SURFACE_SIDE_STYLE('',(#525233)); +#525233 = SURFACE_STYLE_FILL_AREA(#525234); +#525234 = FILL_AREA_STYLE('',(#525235)); +#525235 = FILL_AREA_STYLE_COLOUR('',#523847); +#525236 = OVER_RIDING_STYLED_ITEM('overriding color',(#525237),#42084, + #524051); +#525237 = PRESENTATION_STYLE_ASSIGNMENT((#525238)); +#525238 = SURFACE_STYLE_USAGE(.BOTH.,#525239); +#525239 = SURFACE_SIDE_STYLE('',(#525240)); +#525240 = SURFACE_STYLE_FILL_AREA(#525241); +#525241 = FILL_AREA_STYLE('',(#525242)); +#525242 = FILL_AREA_STYLE_COLOUR('',#523847); +#525243 = OVER_RIDING_STYLED_ITEM('overriding color',(#525244),#42108, + #524051); +#525244 = PRESENTATION_STYLE_ASSIGNMENT((#525245)); +#525245 = SURFACE_STYLE_USAGE(.BOTH.,#525246); +#525246 = SURFACE_SIDE_STYLE('',(#525247)); +#525247 = SURFACE_STYLE_FILL_AREA(#525248); +#525248 = FILL_AREA_STYLE('',(#525249)); +#525249 = FILL_AREA_STYLE_COLOUR('',#523847); +#525250 = OVER_RIDING_STYLED_ITEM('overriding color',(#525251),#42132, + #524051); +#525251 = PRESENTATION_STYLE_ASSIGNMENT((#525252)); +#525252 = SURFACE_STYLE_USAGE(.BOTH.,#525253); +#525253 = SURFACE_SIDE_STYLE('',(#525254)); +#525254 = SURFACE_STYLE_FILL_AREA(#525255); +#525255 = FILL_AREA_STYLE('',(#525256)); +#525256 = FILL_AREA_STYLE_COLOUR('',#523847); +#525257 = OVER_RIDING_STYLED_ITEM('overriding color',(#525258),#42156, + #524051); +#525258 = PRESENTATION_STYLE_ASSIGNMENT((#525259)); +#525259 = SURFACE_STYLE_USAGE(.BOTH.,#525260); +#525260 = SURFACE_SIDE_STYLE('',(#525261)); +#525261 = SURFACE_STYLE_FILL_AREA(#525262); +#525262 = FILL_AREA_STYLE('',(#525263)); +#525263 = FILL_AREA_STYLE_COLOUR('',#523847); +#525264 = OVER_RIDING_STYLED_ITEM('overriding color',(#525265),#42180, + #524051); +#525265 = PRESENTATION_STYLE_ASSIGNMENT((#525266)); +#525266 = SURFACE_STYLE_USAGE(.BOTH.,#525267); +#525267 = SURFACE_SIDE_STYLE('',(#525268)); +#525268 = SURFACE_STYLE_FILL_AREA(#525269); +#525269 = FILL_AREA_STYLE('',(#525270)); +#525270 = FILL_AREA_STYLE_COLOUR('',#523847); +#525271 = OVER_RIDING_STYLED_ITEM('overriding color',(#525272),#42204, + #524051); +#525272 = PRESENTATION_STYLE_ASSIGNMENT((#525273)); +#525273 = SURFACE_STYLE_USAGE(.BOTH.,#525274); +#525274 = SURFACE_SIDE_STYLE('',(#525275)); +#525275 = SURFACE_STYLE_FILL_AREA(#525276); +#525276 = FILL_AREA_STYLE('',(#525277)); +#525277 = FILL_AREA_STYLE_COLOUR('',#523847); +#525278 = OVER_RIDING_STYLED_ITEM('overriding color',(#525279),#42227, + #524051); +#525279 = PRESENTATION_STYLE_ASSIGNMENT((#525280)); +#525280 = SURFACE_STYLE_USAGE(.BOTH.,#525281); +#525281 = SURFACE_SIDE_STYLE('',(#525282)); +#525282 = SURFACE_STYLE_FILL_AREA(#525283); +#525283 = FILL_AREA_STYLE('',(#525284)); +#525284 = FILL_AREA_STYLE_COLOUR('',#523847); +#525285 = OVER_RIDING_STYLED_ITEM('overriding color',(#525286),#42250, + #524051); +#525286 = PRESENTATION_STYLE_ASSIGNMENT((#525287)); +#525287 = SURFACE_STYLE_USAGE(.BOTH.,#525288); +#525288 = SURFACE_SIDE_STYLE('',(#525289)); +#525289 = SURFACE_STYLE_FILL_AREA(#525290); +#525290 = FILL_AREA_STYLE('',(#525291)); +#525291 = FILL_AREA_STYLE_COLOUR('',#523847); +#525292 = OVER_RIDING_STYLED_ITEM('overriding color',(#525293),#42275, + #524051); +#525293 = PRESENTATION_STYLE_ASSIGNMENT((#525294)); +#525294 = SURFACE_STYLE_USAGE(.BOTH.,#525295); +#525295 = SURFACE_SIDE_STYLE('',(#525296)); +#525296 = SURFACE_STYLE_FILL_AREA(#525297); +#525297 = FILL_AREA_STYLE('',(#525298)); +#525298 = FILL_AREA_STYLE_COLOUR('',#523847); +#525299 = OVER_RIDING_STYLED_ITEM('overriding color',(#525300),#42300, + #524051); +#525300 = PRESENTATION_STYLE_ASSIGNMENT((#525301)); +#525301 = SURFACE_STYLE_USAGE(.BOTH.,#525302); +#525302 = SURFACE_SIDE_STYLE('',(#525303)); +#525303 = SURFACE_STYLE_FILL_AREA(#525304); +#525304 = FILL_AREA_STYLE('',(#525305)); +#525305 = FILL_AREA_STYLE_COLOUR('',#523847); +#525306 = OVER_RIDING_STYLED_ITEM('overriding color',(#525307),#42324, + #524051); +#525307 = PRESENTATION_STYLE_ASSIGNMENT((#525308)); +#525308 = SURFACE_STYLE_USAGE(.BOTH.,#525309); +#525309 = SURFACE_SIDE_STYLE('',(#525310)); +#525310 = SURFACE_STYLE_FILL_AREA(#525311); +#525311 = FILL_AREA_STYLE('',(#525312)); +#525312 = FILL_AREA_STYLE_COLOUR('',#523847); +#525313 = OVER_RIDING_STYLED_ITEM('overriding color',(#525314),#42348, + #524051); +#525314 = PRESENTATION_STYLE_ASSIGNMENT((#525315)); +#525315 = SURFACE_STYLE_USAGE(.BOTH.,#525316); +#525316 = SURFACE_SIDE_STYLE('',(#525317)); +#525317 = SURFACE_STYLE_FILL_AREA(#525318); +#525318 = FILL_AREA_STYLE('',(#525319)); +#525319 = FILL_AREA_STYLE_COLOUR('',#523847); +#525320 = OVER_RIDING_STYLED_ITEM('overriding color',(#525321),#42372, + #524051); +#525321 = PRESENTATION_STYLE_ASSIGNMENT((#525322)); +#525322 = SURFACE_STYLE_USAGE(.BOTH.,#525323); +#525323 = SURFACE_SIDE_STYLE('',(#525324)); +#525324 = SURFACE_STYLE_FILL_AREA(#525325); +#525325 = FILL_AREA_STYLE('',(#525326)); +#525326 = FILL_AREA_STYLE_COLOUR('',#523847); +#525327 = OVER_RIDING_STYLED_ITEM('overriding color',(#525328),#42396, + #524051); +#525328 = PRESENTATION_STYLE_ASSIGNMENT((#525329)); +#525329 = SURFACE_STYLE_USAGE(.BOTH.,#525330); +#525330 = SURFACE_SIDE_STYLE('',(#525331)); +#525331 = SURFACE_STYLE_FILL_AREA(#525332); +#525332 = FILL_AREA_STYLE('',(#525333)); +#525333 = FILL_AREA_STYLE_COLOUR('',#523847); +#525334 = OVER_RIDING_STYLED_ITEM('overriding color',(#525335),#42420, + #524051); +#525335 = PRESENTATION_STYLE_ASSIGNMENT((#525336)); +#525336 = SURFACE_STYLE_USAGE(.BOTH.,#525337); +#525337 = SURFACE_SIDE_STYLE('',(#525338)); +#525338 = SURFACE_STYLE_FILL_AREA(#525339); +#525339 = FILL_AREA_STYLE('',(#525340)); +#525340 = FILL_AREA_STYLE_COLOUR('',#523847); +#525341 = OVER_RIDING_STYLED_ITEM('overriding color',(#525342),#42444, + #524051); +#525342 = PRESENTATION_STYLE_ASSIGNMENT((#525343)); +#525343 = SURFACE_STYLE_USAGE(.BOTH.,#525344); +#525344 = SURFACE_SIDE_STYLE('',(#525345)); +#525345 = SURFACE_STYLE_FILL_AREA(#525346); +#525346 = FILL_AREA_STYLE('',(#525347)); +#525347 = FILL_AREA_STYLE_COLOUR('',#523847); +#525348 = OVER_RIDING_STYLED_ITEM('overriding color',(#525349),#42468, + #524051); +#525349 = PRESENTATION_STYLE_ASSIGNMENT((#525350)); +#525350 = SURFACE_STYLE_USAGE(.BOTH.,#525351); +#525351 = SURFACE_SIDE_STYLE('',(#525352)); +#525352 = SURFACE_STYLE_FILL_AREA(#525353); +#525353 = FILL_AREA_STYLE('',(#525354)); +#525354 = FILL_AREA_STYLE_COLOUR('',#523847); +#525355 = OVER_RIDING_STYLED_ITEM('overriding color',(#525356),#42492, + #524051); +#525356 = PRESENTATION_STYLE_ASSIGNMENT((#525357)); +#525357 = SURFACE_STYLE_USAGE(.BOTH.,#525358); +#525358 = SURFACE_SIDE_STYLE('',(#525359)); +#525359 = SURFACE_STYLE_FILL_AREA(#525360); +#525360 = FILL_AREA_STYLE('',(#525361)); +#525361 = FILL_AREA_STYLE_COLOUR('',#523847); +#525362 = OVER_RIDING_STYLED_ITEM('overriding color',(#525363),#42516, + #524051); +#525363 = PRESENTATION_STYLE_ASSIGNMENT((#525364)); +#525364 = SURFACE_STYLE_USAGE(.BOTH.,#525365); +#525365 = SURFACE_SIDE_STYLE('',(#525366)); +#525366 = SURFACE_STYLE_FILL_AREA(#525367); +#525367 = FILL_AREA_STYLE('',(#525368)); +#525368 = FILL_AREA_STYLE_COLOUR('',#523847); +#525369 = OVER_RIDING_STYLED_ITEM('overriding color',(#525370),#42540, + #524051); +#525370 = PRESENTATION_STYLE_ASSIGNMENT((#525371)); +#525371 = SURFACE_STYLE_USAGE(.BOTH.,#525372); +#525372 = SURFACE_SIDE_STYLE('',(#525373)); +#525373 = SURFACE_STYLE_FILL_AREA(#525374); +#525374 = FILL_AREA_STYLE('',(#525375)); +#525375 = FILL_AREA_STYLE_COLOUR('',#523847); +#525376 = OVER_RIDING_STYLED_ITEM('overriding color',(#525377),#42571, + #524051); +#525377 = PRESENTATION_STYLE_ASSIGNMENT((#525378)); +#525378 = SURFACE_STYLE_USAGE(.BOTH.,#525379); +#525379 = SURFACE_SIDE_STYLE('',(#525380)); +#525380 = SURFACE_STYLE_FILL_AREA(#525381); +#525381 = FILL_AREA_STYLE('',(#525382)); +#525382 = FILL_AREA_STYLE_COLOUR('',#523847); +#525383 = OVER_RIDING_STYLED_ITEM('overriding color',(#525384),#42602, + #524051); +#525384 = PRESENTATION_STYLE_ASSIGNMENT((#525385)); +#525385 = SURFACE_STYLE_USAGE(.BOTH.,#525386); +#525386 = SURFACE_SIDE_STYLE('',(#525387)); +#525387 = SURFACE_STYLE_FILL_AREA(#525388); +#525388 = FILL_AREA_STYLE('',(#525389)); +#525389 = FILL_AREA_STYLE_COLOUR('',#523847); +#525390 = OVER_RIDING_STYLED_ITEM('overriding color',(#525391),#42626, + #524051); +#525391 = PRESENTATION_STYLE_ASSIGNMENT((#525392)); +#525392 = SURFACE_STYLE_USAGE(.BOTH.,#525393); +#525393 = SURFACE_SIDE_STYLE('',(#525394)); +#525394 = SURFACE_STYLE_FILL_AREA(#525395); +#525395 = FILL_AREA_STYLE('',(#525396)); +#525396 = FILL_AREA_STYLE_COLOUR('',#523847); +#525397 = OVER_RIDING_STYLED_ITEM('overriding color',(#525398),#42650, + #524051); +#525398 = PRESENTATION_STYLE_ASSIGNMENT((#525399)); +#525399 = SURFACE_STYLE_USAGE(.BOTH.,#525400); +#525400 = SURFACE_SIDE_STYLE('',(#525401)); +#525401 = SURFACE_STYLE_FILL_AREA(#525402); +#525402 = FILL_AREA_STYLE('',(#525403)); +#525403 = FILL_AREA_STYLE_COLOUR('',#523847); +#525404 = OVER_RIDING_STYLED_ITEM('overriding color',(#525405),#42674, + #524051); +#525405 = PRESENTATION_STYLE_ASSIGNMENT((#525406)); +#525406 = SURFACE_STYLE_USAGE(.BOTH.,#525407); +#525407 = SURFACE_SIDE_STYLE('',(#525408)); +#525408 = SURFACE_STYLE_FILL_AREA(#525409); +#525409 = FILL_AREA_STYLE('',(#525410)); +#525410 = FILL_AREA_STYLE_COLOUR('',#523847); +#525411 = OVER_RIDING_STYLED_ITEM('overriding color',(#525412),#42698, + #524051); +#525412 = PRESENTATION_STYLE_ASSIGNMENT((#525413)); +#525413 = SURFACE_STYLE_USAGE(.BOTH.,#525414); +#525414 = SURFACE_SIDE_STYLE('',(#525415)); +#525415 = SURFACE_STYLE_FILL_AREA(#525416); +#525416 = FILL_AREA_STYLE('',(#525417)); +#525417 = FILL_AREA_STYLE_COLOUR('',#523847); +#525418 = OVER_RIDING_STYLED_ITEM('overriding color',(#525419),#42722, + #524051); +#525419 = PRESENTATION_STYLE_ASSIGNMENT((#525420)); +#525420 = SURFACE_STYLE_USAGE(.BOTH.,#525421); +#525421 = SURFACE_SIDE_STYLE('',(#525422)); +#525422 = SURFACE_STYLE_FILL_AREA(#525423); +#525423 = FILL_AREA_STYLE('',(#525424)); +#525424 = FILL_AREA_STYLE_COLOUR('',#523847); +#525425 = OVER_RIDING_STYLED_ITEM('overriding color',(#525426),#42746, + #524051); +#525426 = PRESENTATION_STYLE_ASSIGNMENT((#525427)); +#525427 = SURFACE_STYLE_USAGE(.BOTH.,#525428); +#525428 = SURFACE_SIDE_STYLE('',(#525429)); +#525429 = SURFACE_STYLE_FILL_AREA(#525430); +#525430 = FILL_AREA_STYLE('',(#525431)); +#525431 = FILL_AREA_STYLE_COLOUR('',#523847); +#525432 = OVER_RIDING_STYLED_ITEM('overriding color',(#525433),#42770, + #524051); +#525433 = PRESENTATION_STYLE_ASSIGNMENT((#525434)); +#525434 = SURFACE_STYLE_USAGE(.BOTH.,#525435); +#525435 = SURFACE_SIDE_STYLE('',(#525436)); +#525436 = SURFACE_STYLE_FILL_AREA(#525437); +#525437 = FILL_AREA_STYLE('',(#525438)); +#525438 = FILL_AREA_STYLE_COLOUR('',#523847); +#525439 = OVER_RIDING_STYLED_ITEM('overriding color',(#525440),#42794, + #524051); +#525440 = PRESENTATION_STYLE_ASSIGNMENT((#525441)); +#525441 = SURFACE_STYLE_USAGE(.BOTH.,#525442); +#525442 = SURFACE_SIDE_STYLE('',(#525443)); +#525443 = SURFACE_STYLE_FILL_AREA(#525444); +#525444 = FILL_AREA_STYLE('',(#525445)); +#525445 = FILL_AREA_STYLE_COLOUR('',#523847); +#525446 = OVER_RIDING_STYLED_ITEM('overriding color',(#525447),#42818, + #524051); +#525447 = PRESENTATION_STYLE_ASSIGNMENT((#525448)); +#525448 = SURFACE_STYLE_USAGE(.BOTH.,#525449); +#525449 = SURFACE_SIDE_STYLE('',(#525450)); +#525450 = SURFACE_STYLE_FILL_AREA(#525451); +#525451 = FILL_AREA_STYLE('',(#525452)); +#525452 = FILL_AREA_STYLE_COLOUR('',#523847); +#525453 = OVER_RIDING_STYLED_ITEM('overriding color',(#525454),#42842, + #524051); +#525454 = PRESENTATION_STYLE_ASSIGNMENT((#525455)); +#525455 = SURFACE_STYLE_USAGE(.BOTH.,#525456); +#525456 = SURFACE_SIDE_STYLE('',(#525457)); +#525457 = SURFACE_STYLE_FILL_AREA(#525458); +#525458 = FILL_AREA_STYLE('',(#525459)); +#525459 = FILL_AREA_STYLE_COLOUR('',#523847); +#525460 = OVER_RIDING_STYLED_ITEM('overriding color',(#525461),#42873, + #524051); +#525461 = PRESENTATION_STYLE_ASSIGNMENT((#525462)); +#525462 = SURFACE_STYLE_USAGE(.BOTH.,#525463); +#525463 = SURFACE_SIDE_STYLE('',(#525464)); +#525464 = SURFACE_STYLE_FILL_AREA(#525465); +#525465 = FILL_AREA_STYLE('',(#525466)); +#525466 = FILL_AREA_STYLE_COLOUR('',#523847); +#525467 = OVER_RIDING_STYLED_ITEM('overriding color',(#525468),#42904, + #524051); +#525468 = PRESENTATION_STYLE_ASSIGNMENT((#525469)); +#525469 = SURFACE_STYLE_USAGE(.BOTH.,#525470); +#525470 = SURFACE_SIDE_STYLE('',(#525471)); +#525471 = SURFACE_STYLE_FILL_AREA(#525472); +#525472 = FILL_AREA_STYLE('',(#525473)); +#525473 = FILL_AREA_STYLE_COLOUR('',#523847); +#525474 = OVER_RIDING_STYLED_ITEM('overriding color',(#525475),#42928, + #524051); +#525475 = PRESENTATION_STYLE_ASSIGNMENT((#525476)); +#525476 = SURFACE_STYLE_USAGE(.BOTH.,#525477); +#525477 = SURFACE_SIDE_STYLE('',(#525478)); +#525478 = SURFACE_STYLE_FILL_AREA(#525479); +#525479 = FILL_AREA_STYLE('',(#525480)); +#525480 = FILL_AREA_STYLE_COLOUR('',#523847); +#525481 = OVER_RIDING_STYLED_ITEM('overriding color',(#525482),#42952, + #524051); +#525482 = PRESENTATION_STYLE_ASSIGNMENT((#525483)); +#525483 = SURFACE_STYLE_USAGE(.BOTH.,#525484); +#525484 = SURFACE_SIDE_STYLE('',(#525485)); +#525485 = SURFACE_STYLE_FILL_AREA(#525486); +#525486 = FILL_AREA_STYLE('',(#525487)); +#525487 = FILL_AREA_STYLE_COLOUR('',#523847); +#525488 = OVER_RIDING_STYLED_ITEM('overriding color',(#525489),#42976, + #524051); +#525489 = PRESENTATION_STYLE_ASSIGNMENT((#525490)); +#525490 = SURFACE_STYLE_USAGE(.BOTH.,#525491); +#525491 = SURFACE_SIDE_STYLE('',(#525492)); +#525492 = SURFACE_STYLE_FILL_AREA(#525493); +#525493 = FILL_AREA_STYLE('',(#525494)); +#525494 = FILL_AREA_STYLE_COLOUR('',#523847); +#525495 = OVER_RIDING_STYLED_ITEM('overriding color',(#525496),#43000, + #524051); +#525496 = PRESENTATION_STYLE_ASSIGNMENT((#525497)); +#525497 = SURFACE_STYLE_USAGE(.BOTH.,#525498); +#525498 = SURFACE_SIDE_STYLE('',(#525499)); +#525499 = SURFACE_STYLE_FILL_AREA(#525500); +#525500 = FILL_AREA_STYLE('',(#525501)); +#525501 = FILL_AREA_STYLE_COLOUR('',#523847); +#525502 = OVER_RIDING_STYLED_ITEM('overriding color',(#525503),#43024, + #524051); +#525503 = PRESENTATION_STYLE_ASSIGNMENT((#525504)); +#525504 = SURFACE_STYLE_USAGE(.BOTH.,#525505); +#525505 = SURFACE_SIDE_STYLE('',(#525506)); +#525506 = SURFACE_STYLE_FILL_AREA(#525507); +#525507 = FILL_AREA_STYLE('',(#525508)); +#525508 = FILL_AREA_STYLE_COLOUR('',#523847); +#525509 = OVER_RIDING_STYLED_ITEM('overriding color',(#525510),#43048, + #524051); +#525510 = PRESENTATION_STYLE_ASSIGNMENT((#525511)); +#525511 = SURFACE_STYLE_USAGE(.BOTH.,#525512); +#525512 = SURFACE_SIDE_STYLE('',(#525513)); +#525513 = SURFACE_STYLE_FILL_AREA(#525514); +#525514 = FILL_AREA_STYLE('',(#525515)); +#525515 = FILL_AREA_STYLE_COLOUR('',#523847); +#525516 = OVER_RIDING_STYLED_ITEM('overriding color',(#525517),#43072, + #524051); +#525517 = PRESENTATION_STYLE_ASSIGNMENT((#525518)); +#525518 = SURFACE_STYLE_USAGE(.BOTH.,#525519); +#525519 = SURFACE_SIDE_STYLE('',(#525520)); +#525520 = SURFACE_STYLE_FILL_AREA(#525521); +#525521 = FILL_AREA_STYLE('',(#525522)); +#525522 = FILL_AREA_STYLE_COLOUR('',#523847); +#525523 = OVER_RIDING_STYLED_ITEM('overriding color',(#525524),#43096, + #524051); +#525524 = PRESENTATION_STYLE_ASSIGNMENT((#525525)); +#525525 = SURFACE_STYLE_USAGE(.BOTH.,#525526); +#525526 = SURFACE_SIDE_STYLE('',(#525527)); +#525527 = SURFACE_STYLE_FILL_AREA(#525528); +#525528 = FILL_AREA_STYLE('',(#525529)); +#525529 = FILL_AREA_STYLE_COLOUR('',#523847); +#525530 = OVER_RIDING_STYLED_ITEM('overriding color',(#525531),#43120, + #524051); +#525531 = PRESENTATION_STYLE_ASSIGNMENT((#525532)); +#525532 = SURFACE_STYLE_USAGE(.BOTH.,#525533); +#525533 = SURFACE_SIDE_STYLE('',(#525534)); +#525534 = SURFACE_STYLE_FILL_AREA(#525535); +#525535 = FILL_AREA_STYLE('',(#525536)); +#525536 = FILL_AREA_STYLE_COLOUR('',#523847); +#525537 = OVER_RIDING_STYLED_ITEM('overriding color',(#525538),#43144, + #524051); +#525538 = PRESENTATION_STYLE_ASSIGNMENT((#525539)); +#525539 = SURFACE_STYLE_USAGE(.BOTH.,#525540); +#525540 = SURFACE_SIDE_STYLE('',(#525541)); +#525541 = SURFACE_STYLE_FILL_AREA(#525542); +#525542 = FILL_AREA_STYLE('',(#525543)); +#525543 = FILL_AREA_STYLE_COLOUR('',#523847); +#525544 = OVER_RIDING_STYLED_ITEM('overriding color',(#525545),#43175, + #524051); +#525545 = PRESENTATION_STYLE_ASSIGNMENT((#525546)); +#525546 = SURFACE_STYLE_USAGE(.BOTH.,#525547); +#525547 = SURFACE_SIDE_STYLE('',(#525548)); +#525548 = SURFACE_STYLE_FILL_AREA(#525549); +#525549 = FILL_AREA_STYLE('',(#525550)); +#525550 = FILL_AREA_STYLE_COLOUR('',#523847); +#525551 = OVER_RIDING_STYLED_ITEM('overriding color',(#525552),#43206, + #524051); +#525552 = PRESENTATION_STYLE_ASSIGNMENT((#525553)); +#525553 = SURFACE_STYLE_USAGE(.BOTH.,#525554); +#525554 = SURFACE_SIDE_STYLE('',(#525555)); +#525555 = SURFACE_STYLE_FILL_AREA(#525556); +#525556 = FILL_AREA_STYLE('',(#525557)); +#525557 = FILL_AREA_STYLE_COLOUR('',#523847); +#525558 = OVER_RIDING_STYLED_ITEM('overriding color',(#525559),#43230, + #524051); +#525559 = PRESENTATION_STYLE_ASSIGNMENT((#525560)); +#525560 = SURFACE_STYLE_USAGE(.BOTH.,#525561); +#525561 = SURFACE_SIDE_STYLE('',(#525562)); +#525562 = SURFACE_STYLE_FILL_AREA(#525563); +#525563 = FILL_AREA_STYLE('',(#525564)); +#525564 = FILL_AREA_STYLE_COLOUR('',#523847); +#525565 = OVER_RIDING_STYLED_ITEM('overriding color',(#525566),#43254, + #524051); +#525566 = PRESENTATION_STYLE_ASSIGNMENT((#525567)); +#525567 = SURFACE_STYLE_USAGE(.BOTH.,#525568); +#525568 = SURFACE_SIDE_STYLE('',(#525569)); +#525569 = SURFACE_STYLE_FILL_AREA(#525570); +#525570 = FILL_AREA_STYLE('',(#525571)); +#525571 = FILL_AREA_STYLE_COLOUR('',#523847); +#525572 = OVER_RIDING_STYLED_ITEM('overriding color',(#525573),#43278, + #524051); +#525573 = PRESENTATION_STYLE_ASSIGNMENT((#525574)); +#525574 = SURFACE_STYLE_USAGE(.BOTH.,#525575); +#525575 = SURFACE_SIDE_STYLE('',(#525576)); +#525576 = SURFACE_STYLE_FILL_AREA(#525577); +#525577 = FILL_AREA_STYLE('',(#525578)); +#525578 = FILL_AREA_STYLE_COLOUR('',#523847); +#525579 = OVER_RIDING_STYLED_ITEM('overriding color',(#525580),#43302, + #524051); +#525580 = PRESENTATION_STYLE_ASSIGNMENT((#525581)); +#525581 = SURFACE_STYLE_USAGE(.BOTH.,#525582); +#525582 = SURFACE_SIDE_STYLE('',(#525583)); +#525583 = SURFACE_STYLE_FILL_AREA(#525584); +#525584 = FILL_AREA_STYLE('',(#525585)); +#525585 = FILL_AREA_STYLE_COLOUR('',#523847); +#525586 = OVER_RIDING_STYLED_ITEM('overriding color',(#525587),#43326, + #524051); +#525587 = PRESENTATION_STYLE_ASSIGNMENT((#525588)); +#525588 = SURFACE_STYLE_USAGE(.BOTH.,#525589); +#525589 = SURFACE_SIDE_STYLE('',(#525590)); +#525590 = SURFACE_STYLE_FILL_AREA(#525591); +#525591 = FILL_AREA_STYLE('',(#525592)); +#525592 = FILL_AREA_STYLE_COLOUR('',#523847); +#525593 = OVER_RIDING_STYLED_ITEM('overriding color',(#525594),#43350, + #524051); +#525594 = PRESENTATION_STYLE_ASSIGNMENT((#525595)); +#525595 = SURFACE_STYLE_USAGE(.BOTH.,#525596); +#525596 = SURFACE_SIDE_STYLE('',(#525597)); +#525597 = SURFACE_STYLE_FILL_AREA(#525598); +#525598 = FILL_AREA_STYLE('',(#525599)); +#525599 = FILL_AREA_STYLE_COLOUR('',#523847); +#525600 = OVER_RIDING_STYLED_ITEM('overriding color',(#525601),#43374, + #524051); +#525601 = PRESENTATION_STYLE_ASSIGNMENT((#525602)); +#525602 = SURFACE_STYLE_USAGE(.BOTH.,#525603); +#525603 = SURFACE_SIDE_STYLE('',(#525604)); +#525604 = SURFACE_STYLE_FILL_AREA(#525605); +#525605 = FILL_AREA_STYLE('',(#525606)); +#525606 = FILL_AREA_STYLE_COLOUR('',#523847); +#525607 = OVER_RIDING_STYLED_ITEM('overriding color',(#525608),#43398, + #524051); +#525608 = PRESENTATION_STYLE_ASSIGNMENT((#525609)); +#525609 = SURFACE_STYLE_USAGE(.BOTH.,#525610); +#525610 = SURFACE_SIDE_STYLE('',(#525611)); +#525611 = SURFACE_STYLE_FILL_AREA(#525612); +#525612 = FILL_AREA_STYLE('',(#525613)); +#525613 = FILL_AREA_STYLE_COLOUR('',#523847); +#525614 = OVER_RIDING_STYLED_ITEM('overriding color',(#525615),#43422, + #524051); +#525615 = PRESENTATION_STYLE_ASSIGNMENT((#525616)); +#525616 = SURFACE_STYLE_USAGE(.BOTH.,#525617); +#525617 = SURFACE_SIDE_STYLE('',(#525618)); +#525618 = SURFACE_STYLE_FILL_AREA(#525619); +#525619 = FILL_AREA_STYLE('',(#525620)); +#525620 = FILL_AREA_STYLE_COLOUR('',#523847); +#525621 = OVER_RIDING_STYLED_ITEM('overriding color',(#525622),#43446, + #524051); +#525622 = PRESENTATION_STYLE_ASSIGNMENT((#525623)); +#525623 = SURFACE_STYLE_USAGE(.BOTH.,#525624); +#525624 = SURFACE_SIDE_STYLE('',(#525625)); +#525625 = SURFACE_STYLE_FILL_AREA(#525626); +#525626 = FILL_AREA_STYLE('',(#525627)); +#525627 = FILL_AREA_STYLE_COLOUR('',#523847); +#525628 = OVER_RIDING_STYLED_ITEM('overriding color',(#525629),#43477, + #524051); +#525629 = PRESENTATION_STYLE_ASSIGNMENT((#525630)); +#525630 = SURFACE_STYLE_USAGE(.BOTH.,#525631); +#525631 = SURFACE_SIDE_STYLE('',(#525632)); +#525632 = SURFACE_STYLE_FILL_AREA(#525633); +#525633 = FILL_AREA_STYLE('',(#525634)); +#525634 = FILL_AREA_STYLE_COLOUR('',#523847); +#525635 = OVER_RIDING_STYLED_ITEM('overriding color',(#525636),#43508, + #524051); +#525636 = PRESENTATION_STYLE_ASSIGNMENT((#525637)); +#525637 = SURFACE_STYLE_USAGE(.BOTH.,#525638); +#525638 = SURFACE_SIDE_STYLE('',(#525639)); +#525639 = SURFACE_STYLE_FILL_AREA(#525640); +#525640 = FILL_AREA_STYLE('',(#525641)); +#525641 = FILL_AREA_STYLE_COLOUR('',#523847); +#525642 = OVER_RIDING_STYLED_ITEM('overriding color',(#525643),#43532, + #524051); +#525643 = PRESENTATION_STYLE_ASSIGNMENT((#525644)); +#525644 = SURFACE_STYLE_USAGE(.BOTH.,#525645); +#525645 = SURFACE_SIDE_STYLE('',(#525646)); +#525646 = SURFACE_STYLE_FILL_AREA(#525647); +#525647 = FILL_AREA_STYLE('',(#525648)); +#525648 = FILL_AREA_STYLE_COLOUR('',#523847); +#525649 = OVER_RIDING_STYLED_ITEM('overriding color',(#525650),#43556, + #524051); +#525650 = PRESENTATION_STYLE_ASSIGNMENT((#525651)); +#525651 = SURFACE_STYLE_USAGE(.BOTH.,#525652); +#525652 = SURFACE_SIDE_STYLE('',(#525653)); +#525653 = SURFACE_STYLE_FILL_AREA(#525654); +#525654 = FILL_AREA_STYLE('',(#525655)); +#525655 = FILL_AREA_STYLE_COLOUR('',#523847); +#525656 = OVER_RIDING_STYLED_ITEM('overriding color',(#525657),#43580, + #524051); +#525657 = PRESENTATION_STYLE_ASSIGNMENT((#525658)); +#525658 = SURFACE_STYLE_USAGE(.BOTH.,#525659); +#525659 = SURFACE_SIDE_STYLE('',(#525660)); +#525660 = SURFACE_STYLE_FILL_AREA(#525661); +#525661 = FILL_AREA_STYLE('',(#525662)); +#525662 = FILL_AREA_STYLE_COLOUR('',#523847); +#525663 = OVER_RIDING_STYLED_ITEM('overriding color',(#525664),#43604, + #524051); +#525664 = PRESENTATION_STYLE_ASSIGNMENT((#525665)); +#525665 = SURFACE_STYLE_USAGE(.BOTH.,#525666); +#525666 = SURFACE_SIDE_STYLE('',(#525667)); +#525667 = SURFACE_STYLE_FILL_AREA(#525668); +#525668 = FILL_AREA_STYLE('',(#525669)); +#525669 = FILL_AREA_STYLE_COLOUR('',#523847); +#525670 = OVER_RIDING_STYLED_ITEM('overriding color',(#525671),#43628, + #524051); +#525671 = PRESENTATION_STYLE_ASSIGNMENT((#525672)); +#525672 = SURFACE_STYLE_USAGE(.BOTH.,#525673); +#525673 = SURFACE_SIDE_STYLE('',(#525674)); +#525674 = SURFACE_STYLE_FILL_AREA(#525675); +#525675 = FILL_AREA_STYLE('',(#525676)); +#525676 = FILL_AREA_STYLE_COLOUR('',#523847); +#525677 = OVER_RIDING_STYLED_ITEM('overriding color',(#525678),#43652, + #524051); +#525678 = PRESENTATION_STYLE_ASSIGNMENT((#525679)); +#525679 = SURFACE_STYLE_USAGE(.BOTH.,#525680); +#525680 = SURFACE_SIDE_STYLE('',(#525681)); +#525681 = SURFACE_STYLE_FILL_AREA(#525682); +#525682 = FILL_AREA_STYLE('',(#525683)); +#525683 = FILL_AREA_STYLE_COLOUR('',#523847); +#525684 = OVER_RIDING_STYLED_ITEM('overriding color',(#525685),#43676, + #524051); +#525685 = PRESENTATION_STYLE_ASSIGNMENT((#525686)); +#525686 = SURFACE_STYLE_USAGE(.BOTH.,#525687); +#525687 = SURFACE_SIDE_STYLE('',(#525688)); +#525688 = SURFACE_STYLE_FILL_AREA(#525689); +#525689 = FILL_AREA_STYLE('',(#525690)); +#525690 = FILL_AREA_STYLE_COLOUR('',#523847); +#525691 = OVER_RIDING_STYLED_ITEM('overriding color',(#525692),#43700, + #524051); +#525692 = PRESENTATION_STYLE_ASSIGNMENT((#525693)); +#525693 = SURFACE_STYLE_USAGE(.BOTH.,#525694); +#525694 = SURFACE_SIDE_STYLE('',(#525695)); +#525695 = SURFACE_STYLE_FILL_AREA(#525696); +#525696 = FILL_AREA_STYLE('',(#525697)); +#525697 = FILL_AREA_STYLE_COLOUR('',#523847); +#525698 = OVER_RIDING_STYLED_ITEM('overriding color',(#525699),#43724, + #524051); +#525699 = PRESENTATION_STYLE_ASSIGNMENT((#525700)); +#525700 = SURFACE_STYLE_USAGE(.BOTH.,#525701); +#525701 = SURFACE_SIDE_STYLE('',(#525702)); +#525702 = SURFACE_STYLE_FILL_AREA(#525703); +#525703 = FILL_AREA_STYLE('',(#525704)); +#525704 = FILL_AREA_STYLE_COLOUR('',#523847); +#525705 = OVER_RIDING_STYLED_ITEM('overriding color',(#525706),#43748, + #524051); +#525706 = PRESENTATION_STYLE_ASSIGNMENT((#525707)); +#525707 = SURFACE_STYLE_USAGE(.BOTH.,#525708); +#525708 = SURFACE_SIDE_STYLE('',(#525709)); +#525709 = SURFACE_STYLE_FILL_AREA(#525710); +#525710 = FILL_AREA_STYLE('',(#525711)); +#525711 = FILL_AREA_STYLE_COLOUR('',#523847); +#525712 = OVER_RIDING_STYLED_ITEM('overriding color',(#525713),#43779, + #524051); +#525713 = PRESENTATION_STYLE_ASSIGNMENT((#525714)); +#525714 = SURFACE_STYLE_USAGE(.BOTH.,#525715); +#525715 = SURFACE_SIDE_STYLE('',(#525716)); +#525716 = SURFACE_STYLE_FILL_AREA(#525717); +#525717 = FILL_AREA_STYLE('',(#525718)); +#525718 = FILL_AREA_STYLE_COLOUR('',#523847); +#525719 = OVER_RIDING_STYLED_ITEM('overriding color',(#525720),#43810, + #524051); +#525720 = PRESENTATION_STYLE_ASSIGNMENT((#525721)); +#525721 = SURFACE_STYLE_USAGE(.BOTH.,#525722); +#525722 = SURFACE_SIDE_STYLE('',(#525723)); +#525723 = SURFACE_STYLE_FILL_AREA(#525724); +#525724 = FILL_AREA_STYLE('',(#525725)); +#525725 = FILL_AREA_STYLE_COLOUR('',#523847); +#525726 = OVER_RIDING_STYLED_ITEM('overriding color',(#525727),#43834, + #524051); +#525727 = PRESENTATION_STYLE_ASSIGNMENT((#525728)); +#525728 = SURFACE_STYLE_USAGE(.BOTH.,#525729); +#525729 = SURFACE_SIDE_STYLE('',(#525730)); +#525730 = SURFACE_STYLE_FILL_AREA(#525731); +#525731 = FILL_AREA_STYLE('',(#525732)); +#525732 = FILL_AREA_STYLE_COLOUR('',#523847); +#525733 = OVER_RIDING_STYLED_ITEM('overriding color',(#525734),#43858, + #524051); +#525734 = PRESENTATION_STYLE_ASSIGNMENT((#525735)); +#525735 = SURFACE_STYLE_USAGE(.BOTH.,#525736); +#525736 = SURFACE_SIDE_STYLE('',(#525737)); +#525737 = SURFACE_STYLE_FILL_AREA(#525738); +#525738 = FILL_AREA_STYLE('',(#525739)); +#525739 = FILL_AREA_STYLE_COLOUR('',#523847); +#525740 = OVER_RIDING_STYLED_ITEM('overriding color',(#525741),#43882, + #524051); +#525741 = PRESENTATION_STYLE_ASSIGNMENT((#525742)); +#525742 = SURFACE_STYLE_USAGE(.BOTH.,#525743); +#525743 = SURFACE_SIDE_STYLE('',(#525744)); +#525744 = SURFACE_STYLE_FILL_AREA(#525745); +#525745 = FILL_AREA_STYLE('',(#525746)); +#525746 = FILL_AREA_STYLE_COLOUR('',#523847); +#525747 = OVER_RIDING_STYLED_ITEM('overriding color',(#525748),#43906, + #524051); +#525748 = PRESENTATION_STYLE_ASSIGNMENT((#525749)); +#525749 = SURFACE_STYLE_USAGE(.BOTH.,#525750); +#525750 = SURFACE_SIDE_STYLE('',(#525751)); +#525751 = SURFACE_STYLE_FILL_AREA(#525752); +#525752 = FILL_AREA_STYLE('',(#525753)); +#525753 = FILL_AREA_STYLE_COLOUR('',#523847); +#525754 = OVER_RIDING_STYLED_ITEM('overriding color',(#525755),#43930, + #524051); +#525755 = PRESENTATION_STYLE_ASSIGNMENT((#525756)); +#525756 = SURFACE_STYLE_USAGE(.BOTH.,#525757); +#525757 = SURFACE_SIDE_STYLE('',(#525758)); +#525758 = SURFACE_STYLE_FILL_AREA(#525759); +#525759 = FILL_AREA_STYLE('',(#525760)); +#525760 = FILL_AREA_STYLE_COLOUR('',#523847); +#525761 = OVER_RIDING_STYLED_ITEM('overriding color',(#525762),#43954, + #524051); +#525762 = PRESENTATION_STYLE_ASSIGNMENT((#525763)); +#525763 = SURFACE_STYLE_USAGE(.BOTH.,#525764); +#525764 = SURFACE_SIDE_STYLE('',(#525765)); +#525765 = SURFACE_STYLE_FILL_AREA(#525766); +#525766 = FILL_AREA_STYLE('',(#525767)); +#525767 = FILL_AREA_STYLE_COLOUR('',#523847); +#525768 = OVER_RIDING_STYLED_ITEM('overriding color',(#525769),#43978, + #524051); +#525769 = PRESENTATION_STYLE_ASSIGNMENT((#525770)); +#525770 = SURFACE_STYLE_USAGE(.BOTH.,#525771); +#525771 = SURFACE_SIDE_STYLE('',(#525772)); +#525772 = SURFACE_STYLE_FILL_AREA(#525773); +#525773 = FILL_AREA_STYLE('',(#525774)); +#525774 = FILL_AREA_STYLE_COLOUR('',#523847); +#525775 = OVER_RIDING_STYLED_ITEM('overriding color',(#525776),#44002, + #524051); +#525776 = PRESENTATION_STYLE_ASSIGNMENT((#525777)); +#525777 = SURFACE_STYLE_USAGE(.BOTH.,#525778); +#525778 = SURFACE_SIDE_STYLE('',(#525779)); +#525779 = SURFACE_STYLE_FILL_AREA(#525780); +#525780 = FILL_AREA_STYLE('',(#525781)); +#525781 = FILL_AREA_STYLE_COLOUR('',#523847); +#525782 = OVER_RIDING_STYLED_ITEM('overriding color',(#525783),#44026, + #524051); +#525783 = PRESENTATION_STYLE_ASSIGNMENT((#525784)); +#525784 = SURFACE_STYLE_USAGE(.BOTH.,#525785); +#525785 = SURFACE_SIDE_STYLE('',(#525786)); +#525786 = SURFACE_STYLE_FILL_AREA(#525787); +#525787 = FILL_AREA_STYLE('',(#525788)); +#525788 = FILL_AREA_STYLE_COLOUR('',#523847); +#525789 = OVER_RIDING_STYLED_ITEM('overriding color',(#525790),#44050, + #524051); +#525790 = PRESENTATION_STYLE_ASSIGNMENT((#525791)); +#525791 = SURFACE_STYLE_USAGE(.BOTH.,#525792); +#525792 = SURFACE_SIDE_STYLE('',(#525793)); +#525793 = SURFACE_STYLE_FILL_AREA(#525794); +#525794 = FILL_AREA_STYLE('',(#525795)); +#525795 = FILL_AREA_STYLE_COLOUR('',#523847); +#525796 = OVER_RIDING_STYLED_ITEM('overriding color',(#525797),#44074, + #524051); +#525797 = PRESENTATION_STYLE_ASSIGNMENT((#525798)); +#525798 = SURFACE_STYLE_USAGE(.BOTH.,#525799); +#525799 = SURFACE_SIDE_STYLE('',(#525800)); +#525800 = SURFACE_STYLE_FILL_AREA(#525801); +#525801 = FILL_AREA_STYLE('',(#525802)); +#525802 = FILL_AREA_STYLE_COLOUR('',#523847); +#525803 = OVER_RIDING_STYLED_ITEM('overriding color',(#525804),#44105, + #524051); +#525804 = PRESENTATION_STYLE_ASSIGNMENT((#525805)); +#525805 = SURFACE_STYLE_USAGE(.BOTH.,#525806); +#525806 = SURFACE_SIDE_STYLE('',(#525807)); +#525807 = SURFACE_STYLE_FILL_AREA(#525808); +#525808 = FILL_AREA_STYLE('',(#525809)); +#525809 = FILL_AREA_STYLE_COLOUR('',#523847); +#525810 = OVER_RIDING_STYLED_ITEM('overriding color',(#525811),#44129, + #524051); +#525811 = PRESENTATION_STYLE_ASSIGNMENT((#525812)); +#525812 = SURFACE_STYLE_USAGE(.BOTH.,#525813); +#525813 = SURFACE_SIDE_STYLE('',(#525814)); +#525814 = SURFACE_STYLE_FILL_AREA(#525815); +#525815 = FILL_AREA_STYLE('',(#525816)); +#525816 = FILL_AREA_STYLE_COLOUR('',#523847); +#525817 = OVER_RIDING_STYLED_ITEM('overriding color',(#525818),#44153, + #524051); +#525818 = PRESENTATION_STYLE_ASSIGNMENT((#525819)); +#525819 = SURFACE_STYLE_USAGE(.BOTH.,#525820); +#525820 = SURFACE_SIDE_STYLE('',(#525821)); +#525821 = SURFACE_STYLE_FILL_AREA(#525822); +#525822 = FILL_AREA_STYLE('',(#525823)); +#525823 = FILL_AREA_STYLE_COLOUR('',#523847); +#525824 = OVER_RIDING_STYLED_ITEM('overriding color',(#525825),#44170, + #524051); +#525825 = PRESENTATION_STYLE_ASSIGNMENT((#525826)); +#525826 = SURFACE_STYLE_USAGE(.BOTH.,#525827); +#525827 = SURFACE_SIDE_STYLE('',(#525828)); +#525828 = SURFACE_STYLE_FILL_AREA(#525829); +#525829 = FILL_AREA_STYLE('',(#525830)); +#525830 = FILL_AREA_STYLE_COLOUR('',#523847); +#525831 = OVER_RIDING_STYLED_ITEM('overriding color',(#525832),#44201, + #524051); +#525832 = PRESENTATION_STYLE_ASSIGNMENT((#525833)); +#525833 = SURFACE_STYLE_USAGE(.BOTH.,#525834); +#525834 = SURFACE_SIDE_STYLE('',(#525835)); +#525835 = SURFACE_STYLE_FILL_AREA(#525836); +#525836 = FILL_AREA_STYLE('',(#525837)); +#525837 = FILL_AREA_STYLE_COLOUR('',#523847); +#525838 = OVER_RIDING_STYLED_ITEM('overriding color',(#525839),#44225, + #524051); +#525839 = PRESENTATION_STYLE_ASSIGNMENT((#525840)); +#525840 = SURFACE_STYLE_USAGE(.BOTH.,#525841); +#525841 = SURFACE_SIDE_STYLE('',(#525842)); +#525842 = SURFACE_STYLE_FILL_AREA(#525843); +#525843 = FILL_AREA_STYLE('',(#525844)); +#525844 = FILL_AREA_STYLE_COLOUR('',#523847); +#525845 = OVER_RIDING_STYLED_ITEM('overriding color',(#525846),#44249, + #524051); +#525846 = PRESENTATION_STYLE_ASSIGNMENT((#525847)); +#525847 = SURFACE_STYLE_USAGE(.BOTH.,#525848); +#525848 = SURFACE_SIDE_STYLE('',(#525849)); +#525849 = SURFACE_STYLE_FILL_AREA(#525850); +#525850 = FILL_AREA_STYLE('',(#525851)); +#525851 = FILL_AREA_STYLE_COLOUR('',#523847); +#525852 = OVER_RIDING_STYLED_ITEM('overriding color',(#525853),#44266, + #524051); +#525853 = PRESENTATION_STYLE_ASSIGNMENT((#525854)); +#525854 = SURFACE_STYLE_USAGE(.BOTH.,#525855); +#525855 = SURFACE_SIDE_STYLE('',(#525856)); +#525856 = SURFACE_STYLE_FILL_AREA(#525857); +#525857 = FILL_AREA_STYLE('',(#525858)); +#525858 = FILL_AREA_STYLE_COLOUR('',#523847); +#525859 = OVER_RIDING_STYLED_ITEM('overriding color',(#525860),#44297, + #524051); +#525860 = PRESENTATION_STYLE_ASSIGNMENT((#525861)); +#525861 = SURFACE_STYLE_USAGE(.BOTH.,#525862); +#525862 = SURFACE_SIDE_STYLE('',(#525863)); +#525863 = SURFACE_STYLE_FILL_AREA(#525864); +#525864 = FILL_AREA_STYLE('',(#525865)); +#525865 = FILL_AREA_STYLE_COLOUR('',#523847); +#525866 = OVER_RIDING_STYLED_ITEM('overriding color',(#525867),#44321, + #524051); +#525867 = PRESENTATION_STYLE_ASSIGNMENT((#525868)); +#525868 = SURFACE_STYLE_USAGE(.BOTH.,#525869); +#525869 = SURFACE_SIDE_STYLE('',(#525870)); +#525870 = SURFACE_STYLE_FILL_AREA(#525871); +#525871 = FILL_AREA_STYLE('',(#525872)); +#525872 = FILL_AREA_STYLE_COLOUR('',#523847); +#525873 = OVER_RIDING_STYLED_ITEM('overriding color',(#525874),#44345, + #524051); +#525874 = PRESENTATION_STYLE_ASSIGNMENT((#525875)); +#525875 = SURFACE_STYLE_USAGE(.BOTH.,#525876); +#525876 = SURFACE_SIDE_STYLE('',(#525877)); +#525877 = SURFACE_STYLE_FILL_AREA(#525878); +#525878 = FILL_AREA_STYLE('',(#525879)); +#525879 = FILL_AREA_STYLE_COLOUR('',#523847); +#525880 = OVER_RIDING_STYLED_ITEM('overriding color',(#525881),#44362, + #524051); +#525881 = PRESENTATION_STYLE_ASSIGNMENT((#525882)); +#525882 = SURFACE_STYLE_USAGE(.BOTH.,#525883); +#525883 = SURFACE_SIDE_STYLE('',(#525884)); +#525884 = SURFACE_STYLE_FILL_AREA(#525885); +#525885 = FILL_AREA_STYLE('',(#525886)); +#525886 = FILL_AREA_STYLE_COLOUR('',#523847); +#525887 = OVER_RIDING_STYLED_ITEM('overriding color',(#525888),#44393, + #524051); +#525888 = PRESENTATION_STYLE_ASSIGNMENT((#525889)); +#525889 = SURFACE_STYLE_USAGE(.BOTH.,#525890); +#525890 = SURFACE_SIDE_STYLE('',(#525891)); +#525891 = SURFACE_STYLE_FILL_AREA(#525892); +#525892 = FILL_AREA_STYLE('',(#525893)); +#525893 = FILL_AREA_STYLE_COLOUR('',#523847); +#525894 = OVER_RIDING_STYLED_ITEM('overriding color',(#525895),#44417, + #524051); +#525895 = PRESENTATION_STYLE_ASSIGNMENT((#525896)); +#525896 = SURFACE_STYLE_USAGE(.BOTH.,#525897); +#525897 = SURFACE_SIDE_STYLE('',(#525898)); +#525898 = SURFACE_STYLE_FILL_AREA(#525899); +#525899 = FILL_AREA_STYLE('',(#525900)); +#525900 = FILL_AREA_STYLE_COLOUR('',#523847); +#525901 = OVER_RIDING_STYLED_ITEM('overriding color',(#525902),#44441, + #524051); +#525902 = PRESENTATION_STYLE_ASSIGNMENT((#525903)); +#525903 = SURFACE_STYLE_USAGE(.BOTH.,#525904); +#525904 = SURFACE_SIDE_STYLE('',(#525905)); +#525905 = SURFACE_STYLE_FILL_AREA(#525906); +#525906 = FILL_AREA_STYLE('',(#525907)); +#525907 = FILL_AREA_STYLE_COLOUR('',#523847); +#525908 = OVER_RIDING_STYLED_ITEM('overriding color',(#525909),#44458, + #524051); +#525909 = PRESENTATION_STYLE_ASSIGNMENT((#525910)); +#525910 = SURFACE_STYLE_USAGE(.BOTH.,#525911); +#525911 = SURFACE_SIDE_STYLE('',(#525912)); +#525912 = SURFACE_STYLE_FILL_AREA(#525913); +#525913 = FILL_AREA_STYLE('',(#525914)); +#525914 = FILL_AREA_STYLE_COLOUR('',#523847); +#525915 = OVER_RIDING_STYLED_ITEM('overriding color',(#525916),#44489, + #524051); +#525916 = PRESENTATION_STYLE_ASSIGNMENT((#525917)); +#525917 = SURFACE_STYLE_USAGE(.BOTH.,#525918); +#525918 = SURFACE_SIDE_STYLE('',(#525919)); +#525919 = SURFACE_STYLE_FILL_AREA(#525920); +#525920 = FILL_AREA_STYLE('',(#525921)); +#525921 = FILL_AREA_STYLE_COLOUR('',#523847); +#525922 = OVER_RIDING_STYLED_ITEM('overriding color',(#525923),#44513, + #524051); +#525923 = PRESENTATION_STYLE_ASSIGNMENT((#525924)); +#525924 = SURFACE_STYLE_USAGE(.BOTH.,#525925); +#525925 = SURFACE_SIDE_STYLE('',(#525926)); +#525926 = SURFACE_STYLE_FILL_AREA(#525927); +#525927 = FILL_AREA_STYLE('',(#525928)); +#525928 = FILL_AREA_STYLE_COLOUR('',#523847); +#525929 = OVER_RIDING_STYLED_ITEM('overriding color',(#525930),#44537, + #524051); +#525930 = PRESENTATION_STYLE_ASSIGNMENT((#525931)); +#525931 = SURFACE_STYLE_USAGE(.BOTH.,#525932); +#525932 = SURFACE_SIDE_STYLE('',(#525933)); +#525933 = SURFACE_STYLE_FILL_AREA(#525934); +#525934 = FILL_AREA_STYLE('',(#525935)); +#525935 = FILL_AREA_STYLE_COLOUR('',#523847); +#525936 = OVER_RIDING_STYLED_ITEM('overriding color',(#525937),#44554, + #524051); +#525937 = PRESENTATION_STYLE_ASSIGNMENT((#525938)); +#525938 = SURFACE_STYLE_USAGE(.BOTH.,#525939); +#525939 = SURFACE_SIDE_STYLE('',(#525940)); +#525940 = SURFACE_STYLE_FILL_AREA(#525941); +#525941 = FILL_AREA_STYLE('',(#525942)); +#525942 = FILL_AREA_STYLE_COLOUR('',#523847); +#525943 = OVER_RIDING_STYLED_ITEM('overriding color',(#525944),#44585, + #524051); +#525944 = PRESENTATION_STYLE_ASSIGNMENT((#525945)); +#525945 = SURFACE_STYLE_USAGE(.BOTH.,#525946); +#525946 = SURFACE_SIDE_STYLE('',(#525947)); +#525947 = SURFACE_STYLE_FILL_AREA(#525948); +#525948 = FILL_AREA_STYLE('',(#525949)); +#525949 = FILL_AREA_STYLE_COLOUR('',#523847); +#525950 = OVER_RIDING_STYLED_ITEM('overriding color',(#525951),#44609, + #524051); +#525951 = PRESENTATION_STYLE_ASSIGNMENT((#525952)); +#525952 = SURFACE_STYLE_USAGE(.BOTH.,#525953); +#525953 = SURFACE_SIDE_STYLE('',(#525954)); +#525954 = SURFACE_STYLE_FILL_AREA(#525955); +#525955 = FILL_AREA_STYLE('',(#525956)); +#525956 = FILL_AREA_STYLE_COLOUR('',#523847); +#525957 = OVER_RIDING_STYLED_ITEM('overriding color',(#525958),#44633, + #524051); +#525958 = PRESENTATION_STYLE_ASSIGNMENT((#525959)); +#525959 = SURFACE_STYLE_USAGE(.BOTH.,#525960); +#525960 = SURFACE_SIDE_STYLE('',(#525961)); +#525961 = SURFACE_STYLE_FILL_AREA(#525962); +#525962 = FILL_AREA_STYLE('',(#525963)); +#525963 = FILL_AREA_STYLE_COLOUR('',#523847); +#525964 = OVER_RIDING_STYLED_ITEM('overriding color',(#525965),#44650, + #524051); +#525965 = PRESENTATION_STYLE_ASSIGNMENT((#525966)); +#525966 = SURFACE_STYLE_USAGE(.BOTH.,#525967); +#525967 = SURFACE_SIDE_STYLE('',(#525968)); +#525968 = SURFACE_STYLE_FILL_AREA(#525969); +#525969 = FILL_AREA_STYLE('',(#525970)); +#525970 = FILL_AREA_STYLE_COLOUR('',#523847); +#525971 = OVER_RIDING_STYLED_ITEM('overriding color',(#525972),#44681, + #524051); +#525972 = PRESENTATION_STYLE_ASSIGNMENT((#525973)); +#525973 = SURFACE_STYLE_USAGE(.BOTH.,#525974); +#525974 = SURFACE_SIDE_STYLE('',(#525975)); +#525975 = SURFACE_STYLE_FILL_AREA(#525976); +#525976 = FILL_AREA_STYLE('',(#525977)); +#525977 = FILL_AREA_STYLE_COLOUR('',#523847); +#525978 = OVER_RIDING_STYLED_ITEM('overriding color',(#525979),#44705, + #524051); +#525979 = PRESENTATION_STYLE_ASSIGNMENT((#525980)); +#525980 = SURFACE_STYLE_USAGE(.BOTH.,#525981); +#525981 = SURFACE_SIDE_STYLE('',(#525982)); +#525982 = SURFACE_STYLE_FILL_AREA(#525983); +#525983 = FILL_AREA_STYLE('',(#525984)); +#525984 = FILL_AREA_STYLE_COLOUR('',#523847); +#525985 = OVER_RIDING_STYLED_ITEM('overriding color',(#525986),#44729, + #524051); +#525986 = PRESENTATION_STYLE_ASSIGNMENT((#525987)); +#525987 = SURFACE_STYLE_USAGE(.BOTH.,#525988); +#525988 = SURFACE_SIDE_STYLE('',(#525989)); +#525989 = SURFACE_STYLE_FILL_AREA(#525990); +#525990 = FILL_AREA_STYLE('',(#525991)); +#525991 = FILL_AREA_STYLE_COLOUR('',#523847); +#525992 = OVER_RIDING_STYLED_ITEM('overriding color',(#525993),#44746, + #524051); +#525993 = PRESENTATION_STYLE_ASSIGNMENT((#525994)); +#525994 = SURFACE_STYLE_USAGE(.BOTH.,#525995); +#525995 = SURFACE_SIDE_STYLE('',(#525996)); +#525996 = SURFACE_STYLE_FILL_AREA(#525997); +#525997 = FILL_AREA_STYLE('',(#525998)); +#525998 = FILL_AREA_STYLE_COLOUR('',#523847); +#525999 = OVER_RIDING_STYLED_ITEM('overriding color',(#526000),#44777, + #524051); +#526000 = PRESENTATION_STYLE_ASSIGNMENT((#526001)); +#526001 = SURFACE_STYLE_USAGE(.BOTH.,#526002); +#526002 = SURFACE_SIDE_STYLE('',(#526003)); +#526003 = SURFACE_STYLE_FILL_AREA(#526004); +#526004 = FILL_AREA_STYLE('',(#526005)); +#526005 = FILL_AREA_STYLE_COLOUR('',#523847); +#526006 = OVER_RIDING_STYLED_ITEM('overriding color',(#526007),#44801, + #524051); +#526007 = PRESENTATION_STYLE_ASSIGNMENT((#526008)); +#526008 = SURFACE_STYLE_USAGE(.BOTH.,#526009); +#526009 = SURFACE_SIDE_STYLE('',(#526010)); +#526010 = SURFACE_STYLE_FILL_AREA(#526011); +#526011 = FILL_AREA_STYLE('',(#526012)); +#526012 = FILL_AREA_STYLE_COLOUR('',#523847); +#526013 = OVER_RIDING_STYLED_ITEM('overriding color',(#526014),#44825, + #524051); +#526014 = PRESENTATION_STYLE_ASSIGNMENT((#526015)); +#526015 = SURFACE_STYLE_USAGE(.BOTH.,#526016); +#526016 = SURFACE_SIDE_STYLE('',(#526017)); +#526017 = SURFACE_STYLE_FILL_AREA(#526018); +#526018 = FILL_AREA_STYLE('',(#526019)); +#526019 = FILL_AREA_STYLE_COLOUR('',#523847); +#526020 = OVER_RIDING_STYLED_ITEM('overriding color',(#526021),#44842, + #524051); +#526021 = PRESENTATION_STYLE_ASSIGNMENT((#526022)); +#526022 = SURFACE_STYLE_USAGE(.BOTH.,#526023); +#526023 = SURFACE_SIDE_STYLE('',(#526024)); +#526024 = SURFACE_STYLE_FILL_AREA(#526025); +#526025 = FILL_AREA_STYLE('',(#526026)); +#526026 = FILL_AREA_STYLE_COLOUR('',#523847); +#526027 = OVER_RIDING_STYLED_ITEM('overriding color',(#526028),#44873, + #524051); +#526028 = PRESENTATION_STYLE_ASSIGNMENT((#526029)); +#526029 = SURFACE_STYLE_USAGE(.BOTH.,#526030); +#526030 = SURFACE_SIDE_STYLE('',(#526031)); +#526031 = SURFACE_STYLE_FILL_AREA(#526032); +#526032 = FILL_AREA_STYLE('',(#526033)); +#526033 = FILL_AREA_STYLE_COLOUR('',#523847); +#526034 = OVER_RIDING_STYLED_ITEM('overriding color',(#526035),#44897, + #524051); +#526035 = PRESENTATION_STYLE_ASSIGNMENT((#526036)); +#526036 = SURFACE_STYLE_USAGE(.BOTH.,#526037); +#526037 = SURFACE_SIDE_STYLE('',(#526038)); +#526038 = SURFACE_STYLE_FILL_AREA(#526039); +#526039 = FILL_AREA_STYLE('',(#526040)); +#526040 = FILL_AREA_STYLE_COLOUR('',#523847); +#526041 = OVER_RIDING_STYLED_ITEM('overriding color',(#526042),#44921, + #524051); +#526042 = PRESENTATION_STYLE_ASSIGNMENT((#526043)); +#526043 = SURFACE_STYLE_USAGE(.BOTH.,#526044); +#526044 = SURFACE_SIDE_STYLE('',(#526045)); +#526045 = SURFACE_STYLE_FILL_AREA(#526046); +#526046 = FILL_AREA_STYLE('',(#526047)); +#526047 = FILL_AREA_STYLE_COLOUR('',#523847); +#526048 = OVER_RIDING_STYLED_ITEM('overriding color',(#526049),#44938, + #524051); +#526049 = PRESENTATION_STYLE_ASSIGNMENT((#526050)); +#526050 = SURFACE_STYLE_USAGE(.BOTH.,#526051); +#526051 = SURFACE_SIDE_STYLE('',(#526052)); +#526052 = SURFACE_STYLE_FILL_AREA(#526053); +#526053 = FILL_AREA_STYLE('',(#526054)); +#526054 = FILL_AREA_STYLE_COLOUR('',#523847); +#526055 = OVER_RIDING_STYLED_ITEM('overriding color',(#526056),#44960, + #524051); +#526056 = PRESENTATION_STYLE_ASSIGNMENT((#526057)); +#526057 = SURFACE_STYLE_USAGE(.BOTH.,#526058); +#526058 = SURFACE_SIDE_STYLE('',(#526059)); +#526059 = SURFACE_STYLE_FILL_AREA(#526060); +#526060 = FILL_AREA_STYLE('',(#526061)); +#526061 = FILL_AREA_STYLE_COLOUR('',#523847); +#526062 = OVER_RIDING_STYLED_ITEM('overriding color',(#526063),#44972, + #524051); +#526063 = PRESENTATION_STYLE_ASSIGNMENT((#526064)); +#526064 = SURFACE_STYLE_USAGE(.BOTH.,#526065); +#526065 = SURFACE_SIDE_STYLE('',(#526066)); +#526066 = SURFACE_STYLE_FILL_AREA(#526067); +#526067 = FILL_AREA_STYLE('',(#526068)); +#526068 = FILL_AREA_STYLE_COLOUR('',#523847); +#526069 = OVER_RIDING_STYLED_ITEM('overriding color',(#526070),#44989, + #524051); +#526070 = PRESENTATION_STYLE_ASSIGNMENT((#526071)); +#526071 = SURFACE_STYLE_USAGE(.BOTH.,#526072); +#526072 = SURFACE_SIDE_STYLE('',(#526073)); +#526073 = SURFACE_STYLE_FILL_AREA(#526074); +#526074 = FILL_AREA_STYLE('',(#526075)); +#526075 = FILL_AREA_STYLE_COLOUR('',#523847); +#526076 = OVER_RIDING_STYLED_ITEM('overriding color',(#526077),#45011, + #524051); +#526077 = PRESENTATION_STYLE_ASSIGNMENT((#526078)); +#526078 = SURFACE_STYLE_USAGE(.BOTH.,#526079); +#526079 = SURFACE_SIDE_STYLE('',(#526080)); +#526080 = SURFACE_STYLE_FILL_AREA(#526081); +#526081 = FILL_AREA_STYLE('',(#526082)); +#526082 = FILL_AREA_STYLE_COLOUR('',#523847); +#526083 = OVER_RIDING_STYLED_ITEM('overriding color',(#526084),#45023, + #524051); +#526084 = PRESENTATION_STYLE_ASSIGNMENT((#526085)); +#526085 = SURFACE_STYLE_USAGE(.BOTH.,#526086); +#526086 = SURFACE_SIDE_STYLE('',(#526087)); +#526087 = SURFACE_STYLE_FILL_AREA(#526088); +#526088 = FILL_AREA_STYLE('',(#526089)); +#526089 = FILL_AREA_STYLE_COLOUR('',#523847); +#526090 = OVER_RIDING_STYLED_ITEM('overriding color',(#526091),#45040, + #524051); +#526091 = PRESENTATION_STYLE_ASSIGNMENT((#526092)); +#526092 = SURFACE_STYLE_USAGE(.BOTH.,#526093); +#526093 = SURFACE_SIDE_STYLE('',(#526094)); +#526094 = SURFACE_STYLE_FILL_AREA(#526095); +#526095 = FILL_AREA_STYLE('',(#526096)); +#526096 = FILL_AREA_STYLE_COLOUR('',#523847); +#526097 = OVER_RIDING_STYLED_ITEM('overriding color',(#526098),#45062, + #524051); +#526098 = PRESENTATION_STYLE_ASSIGNMENT((#526099)); +#526099 = SURFACE_STYLE_USAGE(.BOTH.,#526100); +#526100 = SURFACE_SIDE_STYLE('',(#526101)); +#526101 = SURFACE_STYLE_FILL_AREA(#526102); +#526102 = FILL_AREA_STYLE('',(#526103)); +#526103 = FILL_AREA_STYLE_COLOUR('',#523847); +#526104 = OVER_RIDING_STYLED_ITEM('overriding color',(#526105),#45074, + #524051); +#526105 = PRESENTATION_STYLE_ASSIGNMENT((#526106)); +#526106 = SURFACE_STYLE_USAGE(.BOTH.,#526107); +#526107 = SURFACE_SIDE_STYLE('',(#526108)); +#526108 = SURFACE_STYLE_FILL_AREA(#526109); +#526109 = FILL_AREA_STYLE('',(#526110)); +#526110 = FILL_AREA_STYLE_COLOUR('',#523847); +#526111 = OVER_RIDING_STYLED_ITEM('overriding color',(#526112),#45091, + #524051); +#526112 = PRESENTATION_STYLE_ASSIGNMENT((#526113)); +#526113 = SURFACE_STYLE_USAGE(.BOTH.,#526114); +#526114 = SURFACE_SIDE_STYLE('',(#526115)); +#526115 = SURFACE_STYLE_FILL_AREA(#526116); +#526116 = FILL_AREA_STYLE('',(#526117)); +#526117 = FILL_AREA_STYLE_COLOUR('',#523847); +#526118 = OVER_RIDING_STYLED_ITEM('overriding color',(#526119),#45113, + #524051); +#526119 = PRESENTATION_STYLE_ASSIGNMENT((#526120)); +#526120 = SURFACE_STYLE_USAGE(.BOTH.,#526121); +#526121 = SURFACE_SIDE_STYLE('',(#526122)); +#526122 = SURFACE_STYLE_FILL_AREA(#526123); +#526123 = FILL_AREA_STYLE('',(#526124)); +#526124 = FILL_AREA_STYLE_COLOUR('',#523847); +#526125 = OVER_RIDING_STYLED_ITEM('overriding color',(#526126),#45125, + #524051); +#526126 = PRESENTATION_STYLE_ASSIGNMENT((#526127)); +#526127 = SURFACE_STYLE_USAGE(.BOTH.,#526128); +#526128 = SURFACE_SIDE_STYLE('',(#526129)); +#526129 = SURFACE_STYLE_FILL_AREA(#526130); +#526130 = FILL_AREA_STYLE('',(#526131)); +#526131 = FILL_AREA_STYLE_COLOUR('',#523847); +#526132 = OVER_RIDING_STYLED_ITEM('overriding color',(#526133),#45142, + #524051); +#526133 = PRESENTATION_STYLE_ASSIGNMENT((#526134)); +#526134 = SURFACE_STYLE_USAGE(.BOTH.,#526135); +#526135 = SURFACE_SIDE_STYLE('',(#526136)); +#526136 = SURFACE_STYLE_FILL_AREA(#526137); +#526137 = FILL_AREA_STYLE('',(#526138)); +#526138 = FILL_AREA_STYLE_COLOUR('',#523847); +#526139 = OVER_RIDING_STYLED_ITEM('overriding color',(#526140),#45164, + #524051); +#526140 = PRESENTATION_STYLE_ASSIGNMENT((#526141)); +#526141 = SURFACE_STYLE_USAGE(.BOTH.,#526142); +#526142 = SURFACE_SIDE_STYLE('',(#526143)); +#526143 = SURFACE_STYLE_FILL_AREA(#526144); +#526144 = FILL_AREA_STYLE('',(#526145)); +#526145 = FILL_AREA_STYLE_COLOUR('',#523847); +#526146 = OVER_RIDING_STYLED_ITEM('overriding color',(#526147),#45176, + #524051); +#526147 = PRESENTATION_STYLE_ASSIGNMENT((#526148)); +#526148 = SURFACE_STYLE_USAGE(.BOTH.,#526149); +#526149 = SURFACE_SIDE_STYLE('',(#526150)); +#526150 = SURFACE_STYLE_FILL_AREA(#526151); +#526151 = FILL_AREA_STYLE('',(#526152)); +#526152 = FILL_AREA_STYLE_COLOUR('',#523847); +#526153 = OVER_RIDING_STYLED_ITEM('overriding color',(#526154),#45193, + #524051); +#526154 = PRESENTATION_STYLE_ASSIGNMENT((#526155)); +#526155 = SURFACE_STYLE_USAGE(.BOTH.,#526156); +#526156 = SURFACE_SIDE_STYLE('',(#526157)); +#526157 = SURFACE_STYLE_FILL_AREA(#526158); +#526158 = FILL_AREA_STYLE('',(#526159)); +#526159 = FILL_AREA_STYLE_COLOUR('',#523847); +#526160 = OVER_RIDING_STYLED_ITEM('overriding color',(#526161),#45215, + #524051); +#526161 = PRESENTATION_STYLE_ASSIGNMENT((#526162)); +#526162 = SURFACE_STYLE_USAGE(.BOTH.,#526163); +#526163 = SURFACE_SIDE_STYLE('',(#526164)); +#526164 = SURFACE_STYLE_FILL_AREA(#526165); +#526165 = FILL_AREA_STYLE('',(#526166)); +#526166 = FILL_AREA_STYLE_COLOUR('',#523847); +#526167 = OVER_RIDING_STYLED_ITEM('overriding color',(#526168),#45227, + #524051); +#526168 = PRESENTATION_STYLE_ASSIGNMENT((#526169)); +#526169 = SURFACE_STYLE_USAGE(.BOTH.,#526170); +#526170 = SURFACE_SIDE_STYLE('',(#526171)); +#526171 = SURFACE_STYLE_FILL_AREA(#526172); +#526172 = FILL_AREA_STYLE('',(#526173)); +#526173 = FILL_AREA_STYLE_COLOUR('',#523847); +#526174 = OVER_RIDING_STYLED_ITEM('overriding color',(#526175),#45244, + #524051); +#526175 = PRESENTATION_STYLE_ASSIGNMENT((#526176)); +#526176 = SURFACE_STYLE_USAGE(.BOTH.,#526177); +#526177 = SURFACE_SIDE_STYLE('',(#526178)); +#526178 = SURFACE_STYLE_FILL_AREA(#526179); +#526179 = FILL_AREA_STYLE('',(#526180)); +#526180 = FILL_AREA_STYLE_COLOUR('',#523847); +#526181 = OVER_RIDING_STYLED_ITEM('overriding color',(#526182),#45266, + #524051); +#526182 = PRESENTATION_STYLE_ASSIGNMENT((#526183)); +#526183 = SURFACE_STYLE_USAGE(.BOTH.,#526184); +#526184 = SURFACE_SIDE_STYLE('',(#526185)); +#526185 = SURFACE_STYLE_FILL_AREA(#526186); +#526186 = FILL_AREA_STYLE('',(#526187)); +#526187 = FILL_AREA_STYLE_COLOUR('',#523847); +#526188 = OVER_RIDING_STYLED_ITEM('overriding color',(#526189),#45278, + #524051); +#526189 = PRESENTATION_STYLE_ASSIGNMENT((#526190)); +#526190 = SURFACE_STYLE_USAGE(.BOTH.,#526191); +#526191 = SURFACE_SIDE_STYLE('',(#526192)); +#526192 = SURFACE_STYLE_FILL_AREA(#526193); +#526193 = FILL_AREA_STYLE('',(#526194)); +#526194 = FILL_AREA_STYLE_COLOUR('',#523847); +#526195 = OVER_RIDING_STYLED_ITEM('overriding color',(#526196),#45295, + #524051); +#526196 = PRESENTATION_STYLE_ASSIGNMENT((#526197)); +#526197 = SURFACE_STYLE_USAGE(.BOTH.,#526198); +#526198 = SURFACE_SIDE_STYLE('',(#526199)); +#526199 = SURFACE_STYLE_FILL_AREA(#526200); +#526200 = FILL_AREA_STYLE('',(#526201)); +#526201 = FILL_AREA_STYLE_COLOUR('',#523847); +#526202 = OVER_RIDING_STYLED_ITEM('overriding color',(#526203),#45317, + #524051); +#526203 = PRESENTATION_STYLE_ASSIGNMENT((#526204)); +#526204 = SURFACE_STYLE_USAGE(.BOTH.,#526205); +#526205 = SURFACE_SIDE_STYLE('',(#526206)); +#526206 = SURFACE_STYLE_FILL_AREA(#526207); +#526207 = FILL_AREA_STYLE('',(#526208)); +#526208 = FILL_AREA_STYLE_COLOUR('',#523847); +#526209 = OVER_RIDING_STYLED_ITEM('overriding color',(#526210),#45329, + #524051); +#526210 = PRESENTATION_STYLE_ASSIGNMENT((#526211)); +#526211 = SURFACE_STYLE_USAGE(.BOTH.,#526212); +#526212 = SURFACE_SIDE_STYLE('',(#526213)); +#526213 = SURFACE_STYLE_FILL_AREA(#526214); +#526214 = FILL_AREA_STYLE('',(#526215)); +#526215 = FILL_AREA_STYLE_COLOUR('',#523847); +#526216 = OVER_RIDING_STYLED_ITEM('overriding color',(#526217),#45346, + #524051); +#526217 = PRESENTATION_STYLE_ASSIGNMENT((#526218)); +#526218 = SURFACE_STYLE_USAGE(.BOTH.,#526219); +#526219 = SURFACE_SIDE_STYLE('',(#526220)); +#526220 = SURFACE_STYLE_FILL_AREA(#526221); +#526221 = FILL_AREA_STYLE('',(#526222)); +#526222 = FILL_AREA_STYLE_COLOUR('',#523847); +#526223 = OVER_RIDING_STYLED_ITEM('overriding color',(#526224),#45368, + #524051); +#526224 = PRESENTATION_STYLE_ASSIGNMENT((#526225)); +#526225 = SURFACE_STYLE_USAGE(.BOTH.,#526226); +#526226 = SURFACE_SIDE_STYLE('',(#526227)); +#526227 = SURFACE_STYLE_FILL_AREA(#526228); +#526228 = FILL_AREA_STYLE('',(#526229)); +#526229 = FILL_AREA_STYLE_COLOUR('',#523847); +#526230 = OVER_RIDING_STYLED_ITEM('overriding color',(#526231),#45380, + #524051); +#526231 = PRESENTATION_STYLE_ASSIGNMENT((#526232)); +#526232 = SURFACE_STYLE_USAGE(.BOTH.,#526233); +#526233 = SURFACE_SIDE_STYLE('',(#526234)); +#526234 = SURFACE_STYLE_FILL_AREA(#526235); +#526235 = FILL_AREA_STYLE('',(#526236)); +#526236 = FILL_AREA_STYLE_COLOUR('',#523847); +#526237 = OVER_RIDING_STYLED_ITEM('overriding color',(#526238),#45397, + #524051); +#526238 = PRESENTATION_STYLE_ASSIGNMENT((#526239)); +#526239 = SURFACE_STYLE_USAGE(.BOTH.,#526240); +#526240 = SURFACE_SIDE_STYLE('',(#526241)); +#526241 = SURFACE_STYLE_FILL_AREA(#526242); +#526242 = FILL_AREA_STYLE('',(#526243)); +#526243 = FILL_AREA_STYLE_COLOUR('',#523847); +#526244 = OVER_RIDING_STYLED_ITEM('overriding color',(#526245),#45419, + #524051); +#526245 = PRESENTATION_STYLE_ASSIGNMENT((#526246)); +#526246 = SURFACE_STYLE_USAGE(.BOTH.,#526247); +#526247 = SURFACE_SIDE_STYLE('',(#526248)); +#526248 = SURFACE_STYLE_FILL_AREA(#526249); +#526249 = FILL_AREA_STYLE('',(#526250)); +#526250 = FILL_AREA_STYLE_COLOUR('',#523847); +#526251 = OVER_RIDING_STYLED_ITEM('overriding color',(#526252),#45431, + #524051); +#526252 = PRESENTATION_STYLE_ASSIGNMENT((#526253)); +#526253 = SURFACE_STYLE_USAGE(.BOTH.,#526254); +#526254 = SURFACE_SIDE_STYLE('',(#526255)); +#526255 = SURFACE_STYLE_FILL_AREA(#526256); +#526256 = FILL_AREA_STYLE('',(#526257)); +#526257 = FILL_AREA_STYLE_COLOUR('',#523847); +#526258 = OVER_RIDING_STYLED_ITEM('overriding color',(#526259),#45448, + #524051); +#526259 = PRESENTATION_STYLE_ASSIGNMENT((#526260)); +#526260 = SURFACE_STYLE_USAGE(.BOTH.,#526261); +#526261 = SURFACE_SIDE_STYLE('',(#526262)); +#526262 = SURFACE_STYLE_FILL_AREA(#526263); +#526263 = FILL_AREA_STYLE('',(#526264)); +#526264 = FILL_AREA_STYLE_COLOUR('',#523847); +#526265 = OVER_RIDING_STYLED_ITEM('overriding color',(#526266),#45470, + #524051); +#526266 = PRESENTATION_STYLE_ASSIGNMENT((#526267)); +#526267 = SURFACE_STYLE_USAGE(.BOTH.,#526268); +#526268 = SURFACE_SIDE_STYLE('',(#526269)); +#526269 = SURFACE_STYLE_FILL_AREA(#526270); +#526270 = FILL_AREA_STYLE('',(#526271)); +#526271 = FILL_AREA_STYLE_COLOUR('',#523847); +#526272 = OVER_RIDING_STYLED_ITEM('overriding color',(#526273),#45482, + #524051); +#526273 = PRESENTATION_STYLE_ASSIGNMENT((#526274)); +#526274 = SURFACE_STYLE_USAGE(.BOTH.,#526275); +#526275 = SURFACE_SIDE_STYLE('',(#526276)); +#526276 = SURFACE_STYLE_FILL_AREA(#526277); +#526277 = FILL_AREA_STYLE('',(#526278)); +#526278 = FILL_AREA_STYLE_COLOUR('',#523847); +#526279 = OVER_RIDING_STYLED_ITEM('overriding color',(#526280),#45499, + #524051); +#526280 = PRESENTATION_STYLE_ASSIGNMENT((#526281)); +#526281 = SURFACE_STYLE_USAGE(.BOTH.,#526282); +#526282 = SURFACE_SIDE_STYLE('',(#526283)); +#526283 = SURFACE_STYLE_FILL_AREA(#526284); +#526284 = FILL_AREA_STYLE('',(#526285)); +#526285 = FILL_AREA_STYLE_COLOUR('',#523847); +#526286 = OVER_RIDING_STYLED_ITEM('overriding color',(#526287),#45521, + #524051); +#526287 = PRESENTATION_STYLE_ASSIGNMENT((#526288)); +#526288 = SURFACE_STYLE_USAGE(.BOTH.,#526289); +#526289 = SURFACE_SIDE_STYLE('',(#526290)); +#526290 = SURFACE_STYLE_FILL_AREA(#526291); +#526291 = FILL_AREA_STYLE('',(#526292)); +#526292 = FILL_AREA_STYLE_COLOUR('',#523847); +#526293 = OVER_RIDING_STYLED_ITEM('overriding color',(#526294),#45533, + #524051); +#526294 = PRESENTATION_STYLE_ASSIGNMENT((#526295)); +#526295 = SURFACE_STYLE_USAGE(.BOTH.,#526296); +#526296 = SURFACE_SIDE_STYLE('',(#526297)); +#526297 = SURFACE_STYLE_FILL_AREA(#526298); +#526298 = FILL_AREA_STYLE('',(#526299)); +#526299 = FILL_AREA_STYLE_COLOUR('',#523847); +#526300 = OVER_RIDING_STYLED_ITEM('overriding color',(#526301),#45550, + #524051); +#526301 = PRESENTATION_STYLE_ASSIGNMENT((#526302)); +#526302 = SURFACE_STYLE_USAGE(.BOTH.,#526303); +#526303 = SURFACE_SIDE_STYLE('',(#526304)); +#526304 = SURFACE_STYLE_FILL_AREA(#526305); +#526305 = FILL_AREA_STYLE('',(#526306)); +#526306 = FILL_AREA_STYLE_COLOUR('',#523847); +#526307 = OVER_RIDING_STYLED_ITEM('overriding color',(#526308),#45572, + #524051); +#526308 = PRESENTATION_STYLE_ASSIGNMENT((#526309)); +#526309 = SURFACE_STYLE_USAGE(.BOTH.,#526310); +#526310 = SURFACE_SIDE_STYLE('',(#526311)); +#526311 = SURFACE_STYLE_FILL_AREA(#526312); +#526312 = FILL_AREA_STYLE('',(#526313)); +#526313 = FILL_AREA_STYLE_COLOUR('',#523847); +#526314 = OVER_RIDING_STYLED_ITEM('overriding color',(#526315),#45584, + #524051); +#526315 = PRESENTATION_STYLE_ASSIGNMENT((#526316)); +#526316 = SURFACE_STYLE_USAGE(.BOTH.,#526317); +#526317 = SURFACE_SIDE_STYLE('',(#526318)); +#526318 = SURFACE_STYLE_FILL_AREA(#526319); +#526319 = FILL_AREA_STYLE('',(#526320)); +#526320 = FILL_AREA_STYLE_COLOUR('',#523847); +#526321 = OVER_RIDING_STYLED_ITEM('overriding color',(#526322),#45601, + #524051); +#526322 = PRESENTATION_STYLE_ASSIGNMENT((#526323)); +#526323 = SURFACE_STYLE_USAGE(.BOTH.,#526324); +#526324 = SURFACE_SIDE_STYLE('',(#526325)); +#526325 = SURFACE_STYLE_FILL_AREA(#526326); +#526326 = FILL_AREA_STYLE('',(#526327)); +#526327 = FILL_AREA_STYLE_COLOUR('',#523847); +#526328 = OVER_RIDING_STYLED_ITEM('overriding color',(#526329),#45623, + #524051); +#526329 = PRESENTATION_STYLE_ASSIGNMENT((#526330)); +#526330 = SURFACE_STYLE_USAGE(.BOTH.,#526331); +#526331 = SURFACE_SIDE_STYLE('',(#526332)); +#526332 = SURFACE_STYLE_FILL_AREA(#526333); +#526333 = FILL_AREA_STYLE('',(#526334)); +#526334 = FILL_AREA_STYLE_COLOUR('',#523847); +#526335 = OVER_RIDING_STYLED_ITEM('overriding color',(#526336),#45635, + #524051); +#526336 = PRESENTATION_STYLE_ASSIGNMENT((#526337)); +#526337 = SURFACE_STYLE_USAGE(.BOTH.,#526338); +#526338 = SURFACE_SIDE_STYLE('',(#526339)); +#526339 = SURFACE_STYLE_FILL_AREA(#526340); +#526340 = FILL_AREA_STYLE('',(#526341)); +#526341 = FILL_AREA_STYLE_COLOUR('',#523847); +#526342 = OVER_RIDING_STYLED_ITEM('overriding color',(#526343),#45652, + #524051); +#526343 = PRESENTATION_STYLE_ASSIGNMENT((#526344)); +#526344 = SURFACE_STYLE_USAGE(.BOTH.,#526345); +#526345 = SURFACE_SIDE_STYLE('',(#526346)); +#526346 = SURFACE_STYLE_FILL_AREA(#526347); +#526347 = FILL_AREA_STYLE('',(#526348)); +#526348 = FILL_AREA_STYLE_COLOUR('',#523847); +#526349 = OVER_RIDING_STYLED_ITEM('overriding color',(#526350),#45674, + #524051); +#526350 = PRESENTATION_STYLE_ASSIGNMENT((#526351)); +#526351 = SURFACE_STYLE_USAGE(.BOTH.,#526352); +#526352 = SURFACE_SIDE_STYLE('',(#526353)); +#526353 = SURFACE_STYLE_FILL_AREA(#526354); +#526354 = FILL_AREA_STYLE('',(#526355)); +#526355 = FILL_AREA_STYLE_COLOUR('',#523847); +#526356 = OVER_RIDING_STYLED_ITEM('overriding color',(#526357),#45686, + #524051); +#526357 = PRESENTATION_STYLE_ASSIGNMENT((#526358)); +#526358 = SURFACE_STYLE_USAGE(.BOTH.,#526359); +#526359 = SURFACE_SIDE_STYLE('',(#526360)); +#526360 = SURFACE_STYLE_FILL_AREA(#526361); +#526361 = FILL_AREA_STYLE('',(#526362)); +#526362 = FILL_AREA_STYLE_COLOUR('',#523847); +#526363 = OVER_RIDING_STYLED_ITEM('overriding color',(#526364),#45703, + #524051); +#526364 = PRESENTATION_STYLE_ASSIGNMENT((#526365)); +#526365 = SURFACE_STYLE_USAGE(.BOTH.,#526366); +#526366 = SURFACE_SIDE_STYLE('',(#526367)); +#526367 = SURFACE_STYLE_FILL_AREA(#526368); +#526368 = FILL_AREA_STYLE('',(#526369)); +#526369 = FILL_AREA_STYLE_COLOUR('',#523847); +#526370 = OVER_RIDING_STYLED_ITEM('overriding color',(#526371),#45725, + #524051); +#526371 = PRESENTATION_STYLE_ASSIGNMENT((#526372)); +#526372 = SURFACE_STYLE_USAGE(.BOTH.,#526373); +#526373 = SURFACE_SIDE_STYLE('',(#526374)); +#526374 = SURFACE_STYLE_FILL_AREA(#526375); +#526375 = FILL_AREA_STYLE('',(#526376)); +#526376 = FILL_AREA_STYLE_COLOUR('',#523847); +#526377 = OVER_RIDING_STYLED_ITEM('overriding color',(#526378),#45737, + #524051); +#526378 = PRESENTATION_STYLE_ASSIGNMENT((#526379)); +#526379 = SURFACE_STYLE_USAGE(.BOTH.,#526380); +#526380 = SURFACE_SIDE_STYLE('',(#526381)); +#526381 = SURFACE_STYLE_FILL_AREA(#526382); +#526382 = FILL_AREA_STYLE('',(#526383)); +#526383 = FILL_AREA_STYLE_COLOUR('',#523847); +#526384 = OVER_RIDING_STYLED_ITEM('overriding color',(#526385),#45754, + #524051); +#526385 = PRESENTATION_STYLE_ASSIGNMENT((#526386)); +#526386 = SURFACE_STYLE_USAGE(.BOTH.,#526387); +#526387 = SURFACE_SIDE_STYLE('',(#526388)); +#526388 = SURFACE_STYLE_FILL_AREA(#526389); +#526389 = FILL_AREA_STYLE('',(#526390)); +#526390 = FILL_AREA_STYLE_COLOUR('',#523847); +#526391 = OVER_RIDING_STYLED_ITEM('overriding color',(#526392),#45776, + #524051); +#526392 = PRESENTATION_STYLE_ASSIGNMENT((#526393)); +#526393 = SURFACE_STYLE_USAGE(.BOTH.,#526394); +#526394 = SURFACE_SIDE_STYLE('',(#526395)); +#526395 = SURFACE_STYLE_FILL_AREA(#526396); +#526396 = FILL_AREA_STYLE('',(#526397)); +#526397 = FILL_AREA_STYLE_COLOUR('',#523847); +#526398 = OVER_RIDING_STYLED_ITEM('overriding color',(#526399),#45788, + #524051); +#526399 = PRESENTATION_STYLE_ASSIGNMENT((#526400)); +#526400 = SURFACE_STYLE_USAGE(.BOTH.,#526401); +#526401 = SURFACE_SIDE_STYLE('',(#526402)); +#526402 = SURFACE_STYLE_FILL_AREA(#526403); +#526403 = FILL_AREA_STYLE('',(#526404)); +#526404 = FILL_AREA_STYLE_COLOUR('',#523847); +#526405 = OVER_RIDING_STYLED_ITEM('overriding color',(#526406),#45805, + #524051); +#526406 = PRESENTATION_STYLE_ASSIGNMENT((#526407)); +#526407 = SURFACE_STYLE_USAGE(.BOTH.,#526408); +#526408 = SURFACE_SIDE_STYLE('',(#526409)); +#526409 = SURFACE_STYLE_FILL_AREA(#526410); +#526410 = FILL_AREA_STYLE('',(#526411)); +#526411 = FILL_AREA_STYLE_COLOUR('',#523847); +#526412 = OVER_RIDING_STYLED_ITEM('overriding color',(#526413),#45827, + #524051); +#526413 = PRESENTATION_STYLE_ASSIGNMENT((#526414)); +#526414 = SURFACE_STYLE_USAGE(.BOTH.,#526415); +#526415 = SURFACE_SIDE_STYLE('',(#526416)); +#526416 = SURFACE_STYLE_FILL_AREA(#526417); +#526417 = FILL_AREA_STYLE('',(#526418)); +#526418 = FILL_AREA_STYLE_COLOUR('',#523847); +#526419 = OVER_RIDING_STYLED_ITEM('overriding color',(#526420),#45839, + #524051); +#526420 = PRESENTATION_STYLE_ASSIGNMENT((#526421)); +#526421 = SURFACE_STYLE_USAGE(.BOTH.,#526422); +#526422 = SURFACE_SIDE_STYLE('',(#526423)); +#526423 = SURFACE_STYLE_FILL_AREA(#526424); +#526424 = FILL_AREA_STYLE('',(#526425)); +#526425 = FILL_AREA_STYLE_COLOUR('',#523847); +#526426 = OVER_RIDING_STYLED_ITEM('overriding color',(#526427),#45856, + #524051); +#526427 = PRESENTATION_STYLE_ASSIGNMENT((#526428)); +#526428 = SURFACE_STYLE_USAGE(.BOTH.,#526429); +#526429 = SURFACE_SIDE_STYLE('',(#526430)); +#526430 = SURFACE_STYLE_FILL_AREA(#526431); +#526431 = FILL_AREA_STYLE('',(#526432)); +#526432 = FILL_AREA_STYLE_COLOUR('',#523847); +#526433 = OVER_RIDING_STYLED_ITEM('overriding color',(#526434),#45878, + #524051); +#526434 = PRESENTATION_STYLE_ASSIGNMENT((#526435)); +#526435 = SURFACE_STYLE_USAGE(.BOTH.,#526436); +#526436 = SURFACE_SIDE_STYLE('',(#526437)); +#526437 = SURFACE_STYLE_FILL_AREA(#526438); +#526438 = FILL_AREA_STYLE('',(#526439)); +#526439 = FILL_AREA_STYLE_COLOUR('',#523847); +#526440 = OVER_RIDING_STYLED_ITEM('overriding color',(#526441),#45890, + #524051); +#526441 = PRESENTATION_STYLE_ASSIGNMENT((#526442)); +#526442 = SURFACE_STYLE_USAGE(.BOTH.,#526443); +#526443 = SURFACE_SIDE_STYLE('',(#526444)); +#526444 = SURFACE_STYLE_FILL_AREA(#526445); +#526445 = FILL_AREA_STYLE('',(#526446)); +#526446 = FILL_AREA_STYLE_COLOUR('',#523847); +#526447 = OVER_RIDING_STYLED_ITEM('overriding color',(#526448),#45907, + #524051); +#526448 = PRESENTATION_STYLE_ASSIGNMENT((#526449)); +#526449 = SURFACE_STYLE_USAGE(.BOTH.,#526450); +#526450 = SURFACE_SIDE_STYLE('',(#526451)); +#526451 = SURFACE_STYLE_FILL_AREA(#526452); +#526452 = FILL_AREA_STYLE('',(#526453)); +#526453 = FILL_AREA_STYLE_COLOUR('',#523847); +#526454 = OVER_RIDING_STYLED_ITEM('overriding color',(#526455),#45929, + #524051); +#526455 = PRESENTATION_STYLE_ASSIGNMENT((#526456)); +#526456 = SURFACE_STYLE_USAGE(.BOTH.,#526457); +#526457 = SURFACE_SIDE_STYLE('',(#526458)); +#526458 = SURFACE_STYLE_FILL_AREA(#526459); +#526459 = FILL_AREA_STYLE('',(#526460)); +#526460 = FILL_AREA_STYLE_COLOUR('',#523847); +#526461 = OVER_RIDING_STYLED_ITEM('overriding color',(#526462),#45941, + #524051); +#526462 = PRESENTATION_STYLE_ASSIGNMENT((#526463)); +#526463 = SURFACE_STYLE_USAGE(.BOTH.,#526464); +#526464 = SURFACE_SIDE_STYLE('',(#526465)); +#526465 = SURFACE_STYLE_FILL_AREA(#526466); +#526466 = FILL_AREA_STYLE('',(#526467)); +#526467 = FILL_AREA_STYLE_COLOUR('',#523847); +#526468 = OVER_RIDING_STYLED_ITEM('overriding color',(#526469),#45958, + #524051); +#526469 = PRESENTATION_STYLE_ASSIGNMENT((#526470)); +#526470 = SURFACE_STYLE_USAGE(.BOTH.,#526471); +#526471 = SURFACE_SIDE_STYLE('',(#526472)); +#526472 = SURFACE_STYLE_FILL_AREA(#526473); +#526473 = FILL_AREA_STYLE('',(#526474)); +#526474 = FILL_AREA_STYLE_COLOUR('',#523847); +#526475 = OVER_RIDING_STYLED_ITEM('overriding color',(#526476),#45980, + #524051); +#526476 = PRESENTATION_STYLE_ASSIGNMENT((#526477)); +#526477 = SURFACE_STYLE_USAGE(.BOTH.,#526478); +#526478 = SURFACE_SIDE_STYLE('',(#526479)); +#526479 = SURFACE_STYLE_FILL_AREA(#526480); +#526480 = FILL_AREA_STYLE('',(#526481)); +#526481 = FILL_AREA_STYLE_COLOUR('',#523847); +#526482 = OVER_RIDING_STYLED_ITEM('overriding color',(#526483),#45992, + #524051); +#526483 = PRESENTATION_STYLE_ASSIGNMENT((#526484)); +#526484 = SURFACE_STYLE_USAGE(.BOTH.,#526485); +#526485 = SURFACE_SIDE_STYLE('',(#526486)); +#526486 = SURFACE_STYLE_FILL_AREA(#526487); +#526487 = FILL_AREA_STYLE('',(#526488)); +#526488 = FILL_AREA_STYLE_COLOUR('',#523847); +#526489 = OVER_RIDING_STYLED_ITEM('overriding color',(#526490),#46009, + #524051); +#526490 = PRESENTATION_STYLE_ASSIGNMENT((#526491)); +#526491 = SURFACE_STYLE_USAGE(.BOTH.,#526492); +#526492 = SURFACE_SIDE_STYLE('',(#526493)); +#526493 = SURFACE_STYLE_FILL_AREA(#526494); +#526494 = FILL_AREA_STYLE('',(#526495)); +#526495 = FILL_AREA_STYLE_COLOUR('',#523847); +#526496 = OVER_RIDING_STYLED_ITEM('overriding color',(#526497),#46031, + #524051); +#526497 = PRESENTATION_STYLE_ASSIGNMENT((#526498)); +#526498 = SURFACE_STYLE_USAGE(.BOTH.,#526499); +#526499 = SURFACE_SIDE_STYLE('',(#526500)); +#526500 = SURFACE_STYLE_FILL_AREA(#526501); +#526501 = FILL_AREA_STYLE('',(#526502)); +#526502 = FILL_AREA_STYLE_COLOUR('',#523847); +#526503 = OVER_RIDING_STYLED_ITEM('overriding color',(#526504),#46043, + #524051); +#526504 = PRESENTATION_STYLE_ASSIGNMENT((#526505)); +#526505 = SURFACE_STYLE_USAGE(.BOTH.,#526506); +#526506 = SURFACE_SIDE_STYLE('',(#526507)); +#526507 = SURFACE_STYLE_FILL_AREA(#526508); +#526508 = FILL_AREA_STYLE('',(#526509)); +#526509 = FILL_AREA_STYLE_COLOUR('',#523847); +#526510 = OVER_RIDING_STYLED_ITEM('overriding color',(#526511),#46060, + #524051); +#526511 = PRESENTATION_STYLE_ASSIGNMENT((#526512)); +#526512 = SURFACE_STYLE_USAGE(.BOTH.,#526513); +#526513 = SURFACE_SIDE_STYLE('',(#526514)); +#526514 = SURFACE_STYLE_FILL_AREA(#526515); +#526515 = FILL_AREA_STYLE('',(#526516)); +#526516 = FILL_AREA_STYLE_COLOUR('',#523847); +#526517 = OVER_RIDING_STYLED_ITEM('overriding color',(#526518),#46082, + #524051); +#526518 = PRESENTATION_STYLE_ASSIGNMENT((#526519)); +#526519 = SURFACE_STYLE_USAGE(.BOTH.,#526520); +#526520 = SURFACE_SIDE_STYLE('',(#526521)); +#526521 = SURFACE_STYLE_FILL_AREA(#526522); +#526522 = FILL_AREA_STYLE('',(#526523)); +#526523 = FILL_AREA_STYLE_COLOUR('',#523847); +#526524 = OVER_RIDING_STYLED_ITEM('overriding color',(#526525),#46094, + #524051); +#526525 = PRESENTATION_STYLE_ASSIGNMENT((#526526)); +#526526 = SURFACE_STYLE_USAGE(.BOTH.,#526527); +#526527 = SURFACE_SIDE_STYLE('',(#526528)); +#526528 = SURFACE_STYLE_FILL_AREA(#526529); +#526529 = FILL_AREA_STYLE('',(#526530)); +#526530 = FILL_AREA_STYLE_COLOUR('',#523847); +#526531 = OVER_RIDING_STYLED_ITEM('overriding color',(#526532),#46111, + #524051); +#526532 = PRESENTATION_STYLE_ASSIGNMENT((#526533)); +#526533 = SURFACE_STYLE_USAGE(.BOTH.,#526534); +#526534 = SURFACE_SIDE_STYLE('',(#526535)); +#526535 = SURFACE_STYLE_FILL_AREA(#526536); +#526536 = FILL_AREA_STYLE('',(#526537)); +#526537 = FILL_AREA_STYLE_COLOUR('',#523847); +#526538 = OVER_RIDING_STYLED_ITEM('overriding color',(#526539),#46133, + #524051); +#526539 = PRESENTATION_STYLE_ASSIGNMENT((#526540)); +#526540 = SURFACE_STYLE_USAGE(.BOTH.,#526541); +#526541 = SURFACE_SIDE_STYLE('',(#526542)); +#526542 = SURFACE_STYLE_FILL_AREA(#526543); +#526543 = FILL_AREA_STYLE('',(#526544)); +#526544 = FILL_AREA_STYLE_COLOUR('',#523847); +#526545 = OVER_RIDING_STYLED_ITEM('overriding color',(#526546),#46145, + #524051); +#526546 = PRESENTATION_STYLE_ASSIGNMENT((#526547)); +#526547 = SURFACE_STYLE_USAGE(.BOTH.,#526548); +#526548 = SURFACE_SIDE_STYLE('',(#526549)); +#526549 = SURFACE_STYLE_FILL_AREA(#526550); +#526550 = FILL_AREA_STYLE('',(#526551)); +#526551 = FILL_AREA_STYLE_COLOUR('',#523847); +#526552 = OVER_RIDING_STYLED_ITEM('overriding color',(#526553),#46162, + #524051); +#526553 = PRESENTATION_STYLE_ASSIGNMENT((#526554)); +#526554 = SURFACE_STYLE_USAGE(.BOTH.,#526555); +#526555 = SURFACE_SIDE_STYLE('',(#526556)); +#526556 = SURFACE_STYLE_FILL_AREA(#526557); +#526557 = FILL_AREA_STYLE('',(#526558)); +#526558 = FILL_AREA_STYLE_COLOUR('',#523847); +#526559 = OVER_RIDING_STYLED_ITEM('overriding color',(#526560),#46184, + #524051); +#526560 = PRESENTATION_STYLE_ASSIGNMENT((#526561)); +#526561 = SURFACE_STYLE_USAGE(.BOTH.,#526562); +#526562 = SURFACE_SIDE_STYLE('',(#526563)); +#526563 = SURFACE_STYLE_FILL_AREA(#526564); +#526564 = FILL_AREA_STYLE('',(#526565)); +#526565 = FILL_AREA_STYLE_COLOUR('',#523847); +#526566 = OVER_RIDING_STYLED_ITEM('overriding color',(#526567),#46196, + #524051); +#526567 = PRESENTATION_STYLE_ASSIGNMENT((#526568)); +#526568 = SURFACE_STYLE_USAGE(.BOTH.,#526569); +#526569 = SURFACE_SIDE_STYLE('',(#526570)); +#526570 = SURFACE_STYLE_FILL_AREA(#526571); +#526571 = FILL_AREA_STYLE('',(#526572)); +#526572 = FILL_AREA_STYLE_COLOUR('',#523847); +#526573 = OVER_RIDING_STYLED_ITEM('overriding color',(#526574),#46213, + #524051); +#526574 = PRESENTATION_STYLE_ASSIGNMENT((#526575)); +#526575 = SURFACE_STYLE_USAGE(.BOTH.,#526576); +#526576 = SURFACE_SIDE_STYLE('',(#526577)); +#526577 = SURFACE_STYLE_FILL_AREA(#526578); +#526578 = FILL_AREA_STYLE('',(#526579)); +#526579 = FILL_AREA_STYLE_COLOUR('',#523847); +#526580 = OVER_RIDING_STYLED_ITEM('overriding color',(#526581),#46235, + #524051); +#526581 = PRESENTATION_STYLE_ASSIGNMENT((#526582)); +#526582 = SURFACE_STYLE_USAGE(.BOTH.,#526583); +#526583 = SURFACE_SIDE_STYLE('',(#526584)); +#526584 = SURFACE_STYLE_FILL_AREA(#526585); +#526585 = FILL_AREA_STYLE('',(#526586)); +#526586 = FILL_AREA_STYLE_COLOUR('',#523847); +#526587 = OVER_RIDING_STYLED_ITEM('overriding color',(#526588),#46247, + #524051); +#526588 = PRESENTATION_STYLE_ASSIGNMENT((#526589)); +#526589 = SURFACE_STYLE_USAGE(.BOTH.,#526590); +#526590 = SURFACE_SIDE_STYLE('',(#526591)); +#526591 = SURFACE_STYLE_FILL_AREA(#526592); +#526592 = FILL_AREA_STYLE('',(#526593)); +#526593 = FILL_AREA_STYLE_COLOUR('',#523847); +#526594 = OVER_RIDING_STYLED_ITEM('overriding color',(#526595),#46264, + #524051); +#526595 = PRESENTATION_STYLE_ASSIGNMENT((#526596)); +#526596 = SURFACE_STYLE_USAGE(.BOTH.,#526597); +#526597 = SURFACE_SIDE_STYLE('',(#526598)); +#526598 = SURFACE_STYLE_FILL_AREA(#526599); +#526599 = FILL_AREA_STYLE('',(#526600)); +#526600 = FILL_AREA_STYLE_COLOUR('',#523847); +#526601 = OVER_RIDING_STYLED_ITEM('overriding color',(#526602),#46286, + #524051); +#526602 = PRESENTATION_STYLE_ASSIGNMENT((#526603)); +#526603 = SURFACE_STYLE_USAGE(.BOTH.,#526604); +#526604 = SURFACE_SIDE_STYLE('',(#526605)); +#526605 = SURFACE_STYLE_FILL_AREA(#526606); +#526606 = FILL_AREA_STYLE('',(#526607)); +#526607 = FILL_AREA_STYLE_COLOUR('',#523847); +#526608 = OVER_RIDING_STYLED_ITEM('overriding color',(#526609),#46298, + #524051); +#526609 = PRESENTATION_STYLE_ASSIGNMENT((#526610)); +#526610 = SURFACE_STYLE_USAGE(.BOTH.,#526611); +#526611 = SURFACE_SIDE_STYLE('',(#526612)); +#526612 = SURFACE_STYLE_FILL_AREA(#526613); +#526613 = FILL_AREA_STYLE('',(#526614)); +#526614 = FILL_AREA_STYLE_COLOUR('',#523847); +#526615 = OVER_RIDING_STYLED_ITEM('overriding color',(#526616),#46315, + #524051); +#526616 = PRESENTATION_STYLE_ASSIGNMENT((#526617)); +#526617 = SURFACE_STYLE_USAGE(.BOTH.,#526618); +#526618 = SURFACE_SIDE_STYLE('',(#526619)); +#526619 = SURFACE_STYLE_FILL_AREA(#526620); +#526620 = FILL_AREA_STYLE('',(#526621)); +#526621 = FILL_AREA_STYLE_COLOUR('',#523847); +#526622 = OVER_RIDING_STYLED_ITEM('overriding color',(#526623),#46337, + #524051); +#526623 = PRESENTATION_STYLE_ASSIGNMENT((#526624)); +#526624 = SURFACE_STYLE_USAGE(.BOTH.,#526625); +#526625 = SURFACE_SIDE_STYLE('',(#526626)); +#526626 = SURFACE_STYLE_FILL_AREA(#526627); +#526627 = FILL_AREA_STYLE('',(#526628)); +#526628 = FILL_AREA_STYLE_COLOUR('',#523847); +#526629 = OVER_RIDING_STYLED_ITEM('overriding color',(#526630),#46349, + #524051); +#526630 = PRESENTATION_STYLE_ASSIGNMENT((#526631)); +#526631 = SURFACE_STYLE_USAGE(.BOTH.,#526632); +#526632 = SURFACE_SIDE_STYLE('',(#526633)); +#526633 = SURFACE_STYLE_FILL_AREA(#526634); +#526634 = FILL_AREA_STYLE('',(#526635)); +#526635 = FILL_AREA_STYLE_COLOUR('',#523847); +#526636 = OVER_RIDING_STYLED_ITEM('overriding color',(#526637),#46366, + #524051); +#526637 = PRESENTATION_STYLE_ASSIGNMENT((#526638)); +#526638 = SURFACE_STYLE_USAGE(.BOTH.,#526639); +#526639 = SURFACE_SIDE_STYLE('',(#526640)); +#526640 = SURFACE_STYLE_FILL_AREA(#526641); +#526641 = FILL_AREA_STYLE('',(#526642)); +#526642 = FILL_AREA_STYLE_COLOUR('',#523847); +#526643 = OVER_RIDING_STYLED_ITEM('overriding color',(#526644),#46388, + #524051); +#526644 = PRESENTATION_STYLE_ASSIGNMENT((#526645)); +#526645 = SURFACE_STYLE_USAGE(.BOTH.,#526646); +#526646 = SURFACE_SIDE_STYLE('',(#526647)); +#526647 = SURFACE_STYLE_FILL_AREA(#526648); +#526648 = FILL_AREA_STYLE('',(#526649)); +#526649 = FILL_AREA_STYLE_COLOUR('',#523847); +#526650 = OVER_RIDING_STYLED_ITEM('overriding color',(#526651),#46400, + #524051); +#526651 = PRESENTATION_STYLE_ASSIGNMENT((#526652)); +#526652 = SURFACE_STYLE_USAGE(.BOTH.,#526653); +#526653 = SURFACE_SIDE_STYLE('',(#526654)); +#526654 = SURFACE_STYLE_FILL_AREA(#526655); +#526655 = FILL_AREA_STYLE('',(#526656)); +#526656 = FILL_AREA_STYLE_COLOUR('',#523847); +#526657 = OVER_RIDING_STYLED_ITEM('overriding color',(#526658),#46417, + #524051); +#526658 = PRESENTATION_STYLE_ASSIGNMENT((#526659)); +#526659 = SURFACE_STYLE_USAGE(.BOTH.,#526660); +#526660 = SURFACE_SIDE_STYLE('',(#526661)); +#526661 = SURFACE_STYLE_FILL_AREA(#526662); +#526662 = FILL_AREA_STYLE('',(#526663)); +#526663 = FILL_AREA_STYLE_COLOUR('',#523847); +#526664 = OVER_RIDING_STYLED_ITEM('overriding color',(#526665),#46439, + #524051); +#526665 = PRESENTATION_STYLE_ASSIGNMENT((#526666)); +#526666 = SURFACE_STYLE_USAGE(.BOTH.,#526667); +#526667 = SURFACE_SIDE_STYLE('',(#526668)); +#526668 = SURFACE_STYLE_FILL_AREA(#526669); +#526669 = FILL_AREA_STYLE('',(#526670)); +#526670 = FILL_AREA_STYLE_COLOUR('',#523847); +#526671 = OVER_RIDING_STYLED_ITEM('overriding color',(#526672),#46451, + #524051); +#526672 = PRESENTATION_STYLE_ASSIGNMENT((#526673)); +#526673 = SURFACE_STYLE_USAGE(.BOTH.,#526674); +#526674 = SURFACE_SIDE_STYLE('',(#526675)); +#526675 = SURFACE_STYLE_FILL_AREA(#526676); +#526676 = FILL_AREA_STYLE('',(#526677)); +#526677 = FILL_AREA_STYLE_COLOUR('',#523847); +#526678 = OVER_RIDING_STYLED_ITEM('overriding color',(#526679),#46468, + #524051); +#526679 = PRESENTATION_STYLE_ASSIGNMENT((#526680)); +#526680 = SURFACE_STYLE_USAGE(.BOTH.,#526681); +#526681 = SURFACE_SIDE_STYLE('',(#526682)); +#526682 = SURFACE_STYLE_FILL_AREA(#526683); +#526683 = FILL_AREA_STYLE('',(#526684)); +#526684 = FILL_AREA_STYLE_COLOUR('',#523847); +#526685 = OVER_RIDING_STYLED_ITEM('overriding color',(#526686),#46490, + #524051); +#526686 = PRESENTATION_STYLE_ASSIGNMENT((#526687)); +#526687 = SURFACE_STYLE_USAGE(.BOTH.,#526688); +#526688 = SURFACE_SIDE_STYLE('',(#526689)); +#526689 = SURFACE_STYLE_FILL_AREA(#526690); +#526690 = FILL_AREA_STYLE('',(#526691)); +#526691 = FILL_AREA_STYLE_COLOUR('',#523847); +#526692 = OVER_RIDING_STYLED_ITEM('overriding color',(#526693),#46502, + #524051); +#526693 = PRESENTATION_STYLE_ASSIGNMENT((#526694)); +#526694 = SURFACE_STYLE_USAGE(.BOTH.,#526695); +#526695 = SURFACE_SIDE_STYLE('',(#526696)); +#526696 = SURFACE_STYLE_FILL_AREA(#526697); +#526697 = FILL_AREA_STYLE('',(#526698)); +#526698 = FILL_AREA_STYLE_COLOUR('',#523847); +#526699 = OVER_RIDING_STYLED_ITEM('overriding color',(#526700),#46519, + #524051); +#526700 = PRESENTATION_STYLE_ASSIGNMENT((#526701)); +#526701 = SURFACE_STYLE_USAGE(.BOTH.,#526702); +#526702 = SURFACE_SIDE_STYLE('',(#526703)); +#526703 = SURFACE_STYLE_FILL_AREA(#526704); +#526704 = FILL_AREA_STYLE('',(#526705)); +#526705 = FILL_AREA_STYLE_COLOUR('',#523847); +#526706 = OVER_RIDING_STYLED_ITEM('overriding color',(#526707),#46541, + #524051); +#526707 = PRESENTATION_STYLE_ASSIGNMENT((#526708)); +#526708 = SURFACE_STYLE_USAGE(.BOTH.,#526709); +#526709 = SURFACE_SIDE_STYLE('',(#526710)); +#526710 = SURFACE_STYLE_FILL_AREA(#526711); +#526711 = FILL_AREA_STYLE('',(#526712)); +#526712 = FILL_AREA_STYLE_COLOUR('',#523847); +#526713 = OVER_RIDING_STYLED_ITEM('overriding color',(#526714),#46553, + #524051); +#526714 = PRESENTATION_STYLE_ASSIGNMENT((#526715)); +#526715 = SURFACE_STYLE_USAGE(.BOTH.,#526716); +#526716 = SURFACE_SIDE_STYLE('',(#526717)); +#526717 = SURFACE_STYLE_FILL_AREA(#526718); +#526718 = FILL_AREA_STYLE('',(#526719)); +#526719 = FILL_AREA_STYLE_COLOUR('',#523847); +#526720 = OVER_RIDING_STYLED_ITEM('overriding color',(#526721),#46570, + #524051); +#526721 = PRESENTATION_STYLE_ASSIGNMENT((#526722)); +#526722 = SURFACE_STYLE_USAGE(.BOTH.,#526723); +#526723 = SURFACE_SIDE_STYLE('',(#526724)); +#526724 = SURFACE_STYLE_FILL_AREA(#526725); +#526725 = FILL_AREA_STYLE('',(#526726)); +#526726 = FILL_AREA_STYLE_COLOUR('',#523847); +#526727 = OVER_RIDING_STYLED_ITEM('overriding color',(#526728),#46592, + #524051); +#526728 = PRESENTATION_STYLE_ASSIGNMENT((#526729)); +#526729 = SURFACE_STYLE_USAGE(.BOTH.,#526730); +#526730 = SURFACE_SIDE_STYLE('',(#526731)); +#526731 = SURFACE_STYLE_FILL_AREA(#526732); +#526732 = FILL_AREA_STYLE('',(#526733)); +#526733 = FILL_AREA_STYLE_COLOUR('',#523847); +#526734 = OVER_RIDING_STYLED_ITEM('overriding color',(#526735),#46604, + #524051); +#526735 = PRESENTATION_STYLE_ASSIGNMENT((#526736)); +#526736 = SURFACE_STYLE_USAGE(.BOTH.,#526737); +#526737 = SURFACE_SIDE_STYLE('',(#526738)); +#526738 = SURFACE_STYLE_FILL_AREA(#526739); +#526739 = FILL_AREA_STYLE('',(#526740)); +#526740 = FILL_AREA_STYLE_COLOUR('',#523847); +#526741 = OVER_RIDING_STYLED_ITEM('overriding color',(#526742),#46621, + #524051); +#526742 = PRESENTATION_STYLE_ASSIGNMENT((#526743)); +#526743 = SURFACE_STYLE_USAGE(.BOTH.,#526744); +#526744 = SURFACE_SIDE_STYLE('',(#526745)); +#526745 = SURFACE_STYLE_FILL_AREA(#526746); +#526746 = FILL_AREA_STYLE('',(#526747)); +#526747 = FILL_AREA_STYLE_COLOUR('',#523847); +#526748 = OVER_RIDING_STYLED_ITEM('overriding color',(#526749),#46643, + #524051); +#526749 = PRESENTATION_STYLE_ASSIGNMENT((#526750)); +#526750 = SURFACE_STYLE_USAGE(.BOTH.,#526751); +#526751 = SURFACE_SIDE_STYLE('',(#526752)); +#526752 = SURFACE_STYLE_FILL_AREA(#526753); +#526753 = FILL_AREA_STYLE('',(#526754)); +#526754 = FILL_AREA_STYLE_COLOUR('',#523847); +#526755 = OVER_RIDING_STYLED_ITEM('overriding color',(#526756),#46655, + #524051); +#526756 = PRESENTATION_STYLE_ASSIGNMENT((#526757)); +#526757 = SURFACE_STYLE_USAGE(.BOTH.,#526758); +#526758 = SURFACE_SIDE_STYLE('',(#526759)); +#526759 = SURFACE_STYLE_FILL_AREA(#526760); +#526760 = FILL_AREA_STYLE('',(#526761)); +#526761 = FILL_AREA_STYLE_COLOUR('',#523847); +#526762 = OVER_RIDING_STYLED_ITEM('overriding color',(#526763),#46672, + #524051); +#526763 = PRESENTATION_STYLE_ASSIGNMENT((#526764)); +#526764 = SURFACE_STYLE_USAGE(.BOTH.,#526765); +#526765 = SURFACE_SIDE_STYLE('',(#526766)); +#526766 = SURFACE_STYLE_FILL_AREA(#526767); +#526767 = FILL_AREA_STYLE('',(#526768)); +#526768 = FILL_AREA_STYLE_COLOUR('',#523847); +#526769 = OVER_RIDING_STYLED_ITEM('overriding color',(#526770),#46694, + #524051); +#526770 = PRESENTATION_STYLE_ASSIGNMENT((#526771)); +#526771 = SURFACE_STYLE_USAGE(.BOTH.,#526772); +#526772 = SURFACE_SIDE_STYLE('',(#526773)); +#526773 = SURFACE_STYLE_FILL_AREA(#526774); +#526774 = FILL_AREA_STYLE('',(#526775)); +#526775 = FILL_AREA_STYLE_COLOUR('',#523847); +#526776 = OVER_RIDING_STYLED_ITEM('overriding color',(#526777),#46706, + #524051); +#526777 = PRESENTATION_STYLE_ASSIGNMENT((#526778)); +#526778 = SURFACE_STYLE_USAGE(.BOTH.,#526779); +#526779 = SURFACE_SIDE_STYLE('',(#526780)); +#526780 = SURFACE_STYLE_FILL_AREA(#526781); +#526781 = FILL_AREA_STYLE('',(#526782)); +#526782 = FILL_AREA_STYLE_COLOUR('',#523847); +#526783 = OVER_RIDING_STYLED_ITEM('overriding color',(#526784),#46723, + #524051); +#526784 = PRESENTATION_STYLE_ASSIGNMENT((#526785)); +#526785 = SURFACE_STYLE_USAGE(.BOTH.,#526786); +#526786 = SURFACE_SIDE_STYLE('',(#526787)); +#526787 = SURFACE_STYLE_FILL_AREA(#526788); +#526788 = FILL_AREA_STYLE('',(#526789)); +#526789 = FILL_AREA_STYLE_COLOUR('',#523847); +#526790 = OVER_RIDING_STYLED_ITEM('overriding color',(#526791),#46745, + #524051); +#526791 = PRESENTATION_STYLE_ASSIGNMENT((#526792)); +#526792 = SURFACE_STYLE_USAGE(.BOTH.,#526793); +#526793 = SURFACE_SIDE_STYLE('',(#526794)); +#526794 = SURFACE_STYLE_FILL_AREA(#526795); +#526795 = FILL_AREA_STYLE('',(#526796)); +#526796 = FILL_AREA_STYLE_COLOUR('',#523847); +#526797 = OVER_RIDING_STYLED_ITEM('overriding color',(#526798),#46757, + #524051); +#526798 = PRESENTATION_STYLE_ASSIGNMENT((#526799)); +#526799 = SURFACE_STYLE_USAGE(.BOTH.,#526800); +#526800 = SURFACE_SIDE_STYLE('',(#526801)); +#526801 = SURFACE_STYLE_FILL_AREA(#526802); +#526802 = FILL_AREA_STYLE('',(#526803)); +#526803 = FILL_AREA_STYLE_COLOUR('',#523847); +#526804 = OVER_RIDING_STYLED_ITEM('overriding color',(#526805),#46774, + #524051); +#526805 = PRESENTATION_STYLE_ASSIGNMENT((#526806)); +#526806 = SURFACE_STYLE_USAGE(.BOTH.,#526807); +#526807 = SURFACE_SIDE_STYLE('',(#526808)); +#526808 = SURFACE_STYLE_FILL_AREA(#526809); +#526809 = FILL_AREA_STYLE('',(#526810)); +#526810 = FILL_AREA_STYLE_COLOUR('',#523847); +#526811 = OVER_RIDING_STYLED_ITEM('overriding color',(#526812),#46796, + #524051); +#526812 = PRESENTATION_STYLE_ASSIGNMENT((#526813)); +#526813 = SURFACE_STYLE_USAGE(.BOTH.,#526814); +#526814 = SURFACE_SIDE_STYLE('',(#526815)); +#526815 = SURFACE_STYLE_FILL_AREA(#526816); +#526816 = FILL_AREA_STYLE('',(#526817)); +#526817 = FILL_AREA_STYLE_COLOUR('',#523847); +#526818 = OVER_RIDING_STYLED_ITEM('overriding color',(#526819),#46808, + #524051); +#526819 = PRESENTATION_STYLE_ASSIGNMENT((#526820)); +#526820 = SURFACE_STYLE_USAGE(.BOTH.,#526821); +#526821 = SURFACE_SIDE_STYLE('',(#526822)); +#526822 = SURFACE_STYLE_FILL_AREA(#526823); +#526823 = FILL_AREA_STYLE('',(#526824)); +#526824 = FILL_AREA_STYLE_COLOUR('',#523847); +#526825 = OVER_RIDING_STYLED_ITEM('overriding color',(#526826),#46825, + #524051); +#526826 = PRESENTATION_STYLE_ASSIGNMENT((#526827)); +#526827 = SURFACE_STYLE_USAGE(.BOTH.,#526828); +#526828 = SURFACE_SIDE_STYLE('',(#526829)); +#526829 = SURFACE_STYLE_FILL_AREA(#526830); +#526830 = FILL_AREA_STYLE('',(#526831)); +#526831 = FILL_AREA_STYLE_COLOUR('',#523847); +#526832 = OVER_RIDING_STYLED_ITEM('overriding color',(#526833),#46847, + #524051); +#526833 = PRESENTATION_STYLE_ASSIGNMENT((#526834)); +#526834 = SURFACE_STYLE_USAGE(.BOTH.,#526835); +#526835 = SURFACE_SIDE_STYLE('',(#526836)); +#526836 = SURFACE_STYLE_FILL_AREA(#526837); +#526837 = FILL_AREA_STYLE('',(#526838)); +#526838 = FILL_AREA_STYLE_COLOUR('',#523847); +#526839 = OVER_RIDING_STYLED_ITEM('overriding color',(#526840),#46859, + #524051); +#526840 = PRESENTATION_STYLE_ASSIGNMENT((#526841)); +#526841 = SURFACE_STYLE_USAGE(.BOTH.,#526842); +#526842 = SURFACE_SIDE_STYLE('',(#526843)); +#526843 = SURFACE_STYLE_FILL_AREA(#526844); +#526844 = FILL_AREA_STYLE('',(#526845)); +#526845 = FILL_AREA_STYLE_COLOUR('',#523847); +#526846 = OVER_RIDING_STYLED_ITEM('overriding color',(#526847),#46876, + #524051); +#526847 = PRESENTATION_STYLE_ASSIGNMENT((#526848)); +#526848 = SURFACE_STYLE_USAGE(.BOTH.,#526849); +#526849 = SURFACE_SIDE_STYLE('',(#526850)); +#526850 = SURFACE_STYLE_FILL_AREA(#526851); +#526851 = FILL_AREA_STYLE('',(#526852)); +#526852 = FILL_AREA_STYLE_COLOUR('',#523847); +#526853 = OVER_RIDING_STYLED_ITEM('overriding color',(#526854),#46898, + #524051); +#526854 = PRESENTATION_STYLE_ASSIGNMENT((#526855)); +#526855 = SURFACE_STYLE_USAGE(.BOTH.,#526856); +#526856 = SURFACE_SIDE_STYLE('',(#526857)); +#526857 = SURFACE_STYLE_FILL_AREA(#526858); +#526858 = FILL_AREA_STYLE('',(#526859)); +#526859 = FILL_AREA_STYLE_COLOUR('',#523847); +#526860 = OVER_RIDING_STYLED_ITEM('overriding color',(#526861),#46910, + #524051); +#526861 = PRESENTATION_STYLE_ASSIGNMENT((#526862)); +#526862 = SURFACE_STYLE_USAGE(.BOTH.,#526863); +#526863 = SURFACE_SIDE_STYLE('',(#526864)); +#526864 = SURFACE_STYLE_FILL_AREA(#526865); +#526865 = FILL_AREA_STYLE('',(#526866)); +#526866 = FILL_AREA_STYLE_COLOUR('',#523847); +#526867 = OVER_RIDING_STYLED_ITEM('overriding color',(#526868),#46927, + #524051); +#526868 = PRESENTATION_STYLE_ASSIGNMENT((#526869)); +#526869 = SURFACE_STYLE_USAGE(.BOTH.,#526870); +#526870 = SURFACE_SIDE_STYLE('',(#526871)); +#526871 = SURFACE_STYLE_FILL_AREA(#526872); +#526872 = FILL_AREA_STYLE('',(#526873)); +#526873 = FILL_AREA_STYLE_COLOUR('',#523847); +#526874 = OVER_RIDING_STYLED_ITEM('overriding color',(#526875),#46944, + #524051); +#526875 = PRESENTATION_STYLE_ASSIGNMENT((#526876)); +#526876 = SURFACE_STYLE_USAGE(.BOTH.,#526877); +#526877 = SURFACE_SIDE_STYLE('',(#526878)); +#526878 = SURFACE_STYLE_FILL_AREA(#526879); +#526879 = FILL_AREA_STYLE('',(#526880)); +#526880 = FILL_AREA_STYLE_COLOUR('',#523847); +#526881 = OVER_RIDING_STYLED_ITEM('overriding color',(#526882),#46956, + #524051); +#526882 = PRESENTATION_STYLE_ASSIGNMENT((#526883)); +#526883 = SURFACE_STYLE_USAGE(.BOTH.,#526884); +#526884 = SURFACE_SIDE_STYLE('',(#526885)); +#526885 = SURFACE_STYLE_FILL_AREA(#526886); +#526886 = FILL_AREA_STYLE('',(#526887)); +#526887 = FILL_AREA_STYLE_COLOUR('',#523847); +#526888 = OVER_RIDING_STYLED_ITEM('overriding color',(#526889),#46968, + #524051); +#526889 = PRESENTATION_STYLE_ASSIGNMENT((#526890)); +#526890 = SURFACE_STYLE_USAGE(.BOTH.,#526891); +#526891 = SURFACE_SIDE_STYLE('',(#526892)); +#526892 = SURFACE_STYLE_FILL_AREA(#526893); +#526893 = FILL_AREA_STYLE('',(#526894)); +#526894 = FILL_AREA_STYLE_COLOUR('',#523847); +#526895 = OVER_RIDING_STYLED_ITEM('overriding color',(#526896),#46980, + #524051); +#526896 = PRESENTATION_STYLE_ASSIGNMENT((#526897)); +#526897 = SURFACE_STYLE_USAGE(.BOTH.,#526898); +#526898 = SURFACE_SIDE_STYLE('',(#526899)); +#526899 = SURFACE_STYLE_FILL_AREA(#526900); +#526900 = FILL_AREA_STYLE('',(#526901)); +#526901 = FILL_AREA_STYLE_COLOUR('',#523847); +#526902 = OVER_RIDING_STYLED_ITEM('overriding color',(#526903),#46992, + #524051); +#526903 = PRESENTATION_STYLE_ASSIGNMENT((#526904)); +#526904 = SURFACE_STYLE_USAGE(.BOTH.,#526905); +#526905 = SURFACE_SIDE_STYLE('',(#526906)); +#526906 = SURFACE_STYLE_FILL_AREA(#526907); +#526907 = FILL_AREA_STYLE('',(#526908)); +#526908 = FILL_AREA_STYLE_COLOUR('',#523847); +#526909 = OVER_RIDING_STYLED_ITEM('overriding color',(#526910),#47004, + #524051); +#526910 = PRESENTATION_STYLE_ASSIGNMENT((#526911)); +#526911 = SURFACE_STYLE_USAGE(.BOTH.,#526912); +#526912 = SURFACE_SIDE_STYLE('',(#526913)); +#526913 = SURFACE_STYLE_FILL_AREA(#526914); +#526914 = FILL_AREA_STYLE('',(#526915)); +#526915 = FILL_AREA_STYLE_COLOUR('',#523847); +#526916 = OVER_RIDING_STYLED_ITEM('overriding color',(#526917),#47016, + #524051); +#526917 = PRESENTATION_STYLE_ASSIGNMENT((#526918)); +#526918 = SURFACE_STYLE_USAGE(.BOTH.,#526919); +#526919 = SURFACE_SIDE_STYLE('',(#526920)); +#526920 = SURFACE_STYLE_FILL_AREA(#526921); +#526921 = FILL_AREA_STYLE('',(#526922)); +#526922 = FILL_AREA_STYLE_COLOUR('',#523847); +#526923 = OVER_RIDING_STYLED_ITEM('overriding color',(#526924),#47028, + #524051); +#526924 = PRESENTATION_STYLE_ASSIGNMENT((#526925)); +#526925 = SURFACE_STYLE_USAGE(.BOTH.,#526926); +#526926 = SURFACE_SIDE_STYLE('',(#526927)); +#526927 = SURFACE_STYLE_FILL_AREA(#526928); +#526928 = FILL_AREA_STYLE('',(#526929)); +#526929 = FILL_AREA_STYLE_COLOUR('',#523847); +#526930 = OVER_RIDING_STYLED_ITEM('overriding color',(#526931),#47040, + #524051); +#526931 = PRESENTATION_STYLE_ASSIGNMENT((#526932)); +#526932 = SURFACE_STYLE_USAGE(.BOTH.,#526933); +#526933 = SURFACE_SIDE_STYLE('',(#526934)); +#526934 = SURFACE_STYLE_FILL_AREA(#526935); +#526935 = FILL_AREA_STYLE('',(#526936)); +#526936 = FILL_AREA_STYLE_COLOUR('',#523847); +#526937 = OVER_RIDING_STYLED_ITEM('overriding color',(#526938),#47052, + #524051); +#526938 = PRESENTATION_STYLE_ASSIGNMENT((#526939)); +#526939 = SURFACE_STYLE_USAGE(.BOTH.,#526940); +#526940 = SURFACE_SIDE_STYLE('',(#526941)); +#526941 = SURFACE_STYLE_FILL_AREA(#526942); +#526942 = FILL_AREA_STYLE('',(#526943)); +#526943 = FILL_AREA_STYLE_COLOUR('',#523847); +#526944 = OVER_RIDING_STYLED_ITEM('overriding color',(#526945),#47064, + #524051); +#526945 = PRESENTATION_STYLE_ASSIGNMENT((#526946)); +#526946 = SURFACE_STYLE_USAGE(.BOTH.,#526947); +#526947 = SURFACE_SIDE_STYLE('',(#526948)); +#526948 = SURFACE_STYLE_FILL_AREA(#526949); +#526949 = FILL_AREA_STYLE('',(#526950)); +#526950 = FILL_AREA_STYLE_COLOUR('',#523847); +#526951 = OVER_RIDING_STYLED_ITEM('overriding color',(#526952),#47076, + #524051); +#526952 = PRESENTATION_STYLE_ASSIGNMENT((#526953)); +#526953 = SURFACE_STYLE_USAGE(.BOTH.,#526954); +#526954 = SURFACE_SIDE_STYLE('',(#526955)); +#526955 = SURFACE_STYLE_FILL_AREA(#526956); +#526956 = FILL_AREA_STYLE('',(#526957)); +#526957 = FILL_AREA_STYLE_COLOUR('',#523847); +#526958 = OVER_RIDING_STYLED_ITEM('overriding color',(#526959),#47088, + #524051); +#526959 = PRESENTATION_STYLE_ASSIGNMENT((#526960)); +#526960 = SURFACE_STYLE_USAGE(.BOTH.,#526961); +#526961 = SURFACE_SIDE_STYLE('',(#526962)); +#526962 = SURFACE_STYLE_FILL_AREA(#526963); +#526963 = FILL_AREA_STYLE('',(#526964)); +#526964 = FILL_AREA_STYLE_COLOUR('',#523847); +#526965 = OVER_RIDING_STYLED_ITEM('overriding color',(#526966),#47100, + #524051); +#526966 = PRESENTATION_STYLE_ASSIGNMENT((#526967)); +#526967 = SURFACE_STYLE_USAGE(.BOTH.,#526968); +#526968 = SURFACE_SIDE_STYLE('',(#526969)); +#526969 = SURFACE_STYLE_FILL_AREA(#526970); +#526970 = FILL_AREA_STYLE('',(#526971)); +#526971 = FILL_AREA_STYLE_COLOUR('',#523847); +#526972 = OVER_RIDING_STYLED_ITEM('overriding color',(#526973),#47112, + #524051); +#526973 = PRESENTATION_STYLE_ASSIGNMENT((#526974)); +#526974 = SURFACE_STYLE_USAGE(.BOTH.,#526975); +#526975 = SURFACE_SIDE_STYLE('',(#526976)); +#526976 = SURFACE_STYLE_FILL_AREA(#526977); +#526977 = FILL_AREA_STYLE('',(#526978)); +#526978 = FILL_AREA_STYLE_COLOUR('',#523847); +#526979 = OVER_RIDING_STYLED_ITEM('overriding color',(#526980),#47124, + #524051); +#526980 = PRESENTATION_STYLE_ASSIGNMENT((#526981)); +#526981 = SURFACE_STYLE_USAGE(.BOTH.,#526982); +#526982 = SURFACE_SIDE_STYLE('',(#526983)); +#526983 = SURFACE_STYLE_FILL_AREA(#526984); +#526984 = FILL_AREA_STYLE('',(#526985)); +#526985 = FILL_AREA_STYLE_COLOUR('',#523847); +#526986 = OVER_RIDING_STYLED_ITEM('overriding color',(#526987),#47136, + #524051); +#526987 = PRESENTATION_STYLE_ASSIGNMENT((#526988)); +#526988 = SURFACE_STYLE_USAGE(.BOTH.,#526989); +#526989 = SURFACE_SIDE_STYLE('',(#526990)); +#526990 = SURFACE_STYLE_FILL_AREA(#526991); +#526991 = FILL_AREA_STYLE('',(#526992)); +#526992 = FILL_AREA_STYLE_COLOUR('',#523847); +#526993 = OVER_RIDING_STYLED_ITEM('overriding color',(#526994),#47148, + #524051); +#526994 = PRESENTATION_STYLE_ASSIGNMENT((#526995)); +#526995 = SURFACE_STYLE_USAGE(.BOTH.,#526996); +#526996 = SURFACE_SIDE_STYLE('',(#526997)); +#526997 = SURFACE_STYLE_FILL_AREA(#526998); +#526998 = FILL_AREA_STYLE('',(#526999)); +#526999 = FILL_AREA_STYLE_COLOUR('',#523847); +#527000 = OVER_RIDING_STYLED_ITEM('overriding color',(#527001),#47160, + #524051); +#527001 = PRESENTATION_STYLE_ASSIGNMENT((#527002)); +#527002 = SURFACE_STYLE_USAGE(.BOTH.,#527003); +#527003 = SURFACE_SIDE_STYLE('',(#527004)); +#527004 = SURFACE_STYLE_FILL_AREA(#527005); +#527005 = FILL_AREA_STYLE('',(#527006)); +#527006 = FILL_AREA_STYLE_COLOUR('',#523847); +#527007 = OVER_RIDING_STYLED_ITEM('overriding color',(#527008),#47172, + #524051); +#527008 = PRESENTATION_STYLE_ASSIGNMENT((#527009)); +#527009 = SURFACE_STYLE_USAGE(.BOTH.,#527010); +#527010 = SURFACE_SIDE_STYLE('',(#527011)); +#527011 = SURFACE_STYLE_FILL_AREA(#527012); +#527012 = FILL_AREA_STYLE('',(#527013)); +#527013 = FILL_AREA_STYLE_COLOUR('',#523847); +#527014 = OVER_RIDING_STYLED_ITEM('overriding color',(#527015),#47184, + #524051); +#527015 = PRESENTATION_STYLE_ASSIGNMENT((#527016)); +#527016 = SURFACE_STYLE_USAGE(.BOTH.,#527017); +#527017 = SURFACE_SIDE_STYLE('',(#527018)); +#527018 = SURFACE_STYLE_FILL_AREA(#527019); +#527019 = FILL_AREA_STYLE('',(#527020)); +#527020 = FILL_AREA_STYLE_COLOUR('',#523847); +#527021 = OVER_RIDING_STYLED_ITEM('overriding color',(#527022),#47196, + #524051); +#527022 = PRESENTATION_STYLE_ASSIGNMENT((#527023)); +#527023 = SURFACE_STYLE_USAGE(.BOTH.,#527024); +#527024 = SURFACE_SIDE_STYLE('',(#527025)); +#527025 = SURFACE_STYLE_FILL_AREA(#527026); +#527026 = FILL_AREA_STYLE('',(#527027)); +#527027 = FILL_AREA_STYLE_COLOUR('',#523847); +#527028 = OVER_RIDING_STYLED_ITEM('overriding color',(#527029),#47208, + #524051); +#527029 = PRESENTATION_STYLE_ASSIGNMENT((#527030)); +#527030 = SURFACE_STYLE_USAGE(.BOTH.,#527031); +#527031 = SURFACE_SIDE_STYLE('',(#527032)); +#527032 = SURFACE_STYLE_FILL_AREA(#527033); +#527033 = FILL_AREA_STYLE('',(#527034)); +#527034 = FILL_AREA_STYLE_COLOUR('',#523847); +#527035 = OVER_RIDING_STYLED_ITEM('overriding color',(#527036),#47220, + #524051); +#527036 = PRESENTATION_STYLE_ASSIGNMENT((#527037)); +#527037 = SURFACE_STYLE_USAGE(.BOTH.,#527038); +#527038 = SURFACE_SIDE_STYLE('',(#527039)); +#527039 = SURFACE_STYLE_FILL_AREA(#527040); +#527040 = FILL_AREA_STYLE('',(#527041)); +#527041 = FILL_AREA_STYLE_COLOUR('',#523847); +#527042 = OVER_RIDING_STYLED_ITEM('overriding color',(#527043),#47232, + #524051); +#527043 = PRESENTATION_STYLE_ASSIGNMENT((#527044)); +#527044 = SURFACE_STYLE_USAGE(.BOTH.,#527045); +#527045 = SURFACE_SIDE_STYLE('',(#527046)); +#527046 = SURFACE_STYLE_FILL_AREA(#527047); +#527047 = FILL_AREA_STYLE('',(#527048)); +#527048 = FILL_AREA_STYLE_COLOUR('',#523847); +#527049 = OVER_RIDING_STYLED_ITEM('overriding color',(#527050),#47244, + #524051); +#527050 = PRESENTATION_STYLE_ASSIGNMENT((#527051)); +#527051 = SURFACE_STYLE_USAGE(.BOTH.,#527052); +#527052 = SURFACE_SIDE_STYLE('',(#527053)); +#527053 = SURFACE_STYLE_FILL_AREA(#527054); +#527054 = FILL_AREA_STYLE('',(#527055)); +#527055 = FILL_AREA_STYLE_COLOUR('',#523847); +#527056 = OVER_RIDING_STYLED_ITEM('overriding color',(#527057),#47256, + #524051); +#527057 = PRESENTATION_STYLE_ASSIGNMENT((#527058)); +#527058 = SURFACE_STYLE_USAGE(.BOTH.,#527059); +#527059 = SURFACE_SIDE_STYLE('',(#527060)); +#527060 = SURFACE_STYLE_FILL_AREA(#527061); +#527061 = FILL_AREA_STYLE('',(#527062)); +#527062 = FILL_AREA_STYLE_COLOUR('',#523847); +#527063 = OVER_RIDING_STYLED_ITEM('overriding color',(#527064),#47268, + #524051); +#527064 = PRESENTATION_STYLE_ASSIGNMENT((#527065)); +#527065 = SURFACE_STYLE_USAGE(.BOTH.,#527066); +#527066 = SURFACE_SIDE_STYLE('',(#527067)); +#527067 = SURFACE_STYLE_FILL_AREA(#527068); +#527068 = FILL_AREA_STYLE('',(#527069)); +#527069 = FILL_AREA_STYLE_COLOUR('',#523847); +#527070 = OVER_RIDING_STYLED_ITEM('overriding color',(#527071),#47280, + #524051); +#527071 = PRESENTATION_STYLE_ASSIGNMENT((#527072)); +#527072 = SURFACE_STYLE_USAGE(.BOTH.,#527073); +#527073 = SURFACE_SIDE_STYLE('',(#527074)); +#527074 = SURFACE_STYLE_FILL_AREA(#527075); +#527075 = FILL_AREA_STYLE('',(#527076)); +#527076 = FILL_AREA_STYLE_COLOUR('',#523847); +#527077 = OVER_RIDING_STYLED_ITEM('overriding color',(#527078),#47292, + #524051); +#527078 = PRESENTATION_STYLE_ASSIGNMENT((#527079)); +#527079 = SURFACE_STYLE_USAGE(.BOTH.,#527080); +#527080 = SURFACE_SIDE_STYLE('',(#527081)); +#527081 = SURFACE_STYLE_FILL_AREA(#527082); +#527082 = FILL_AREA_STYLE('',(#527083)); +#527083 = FILL_AREA_STYLE_COLOUR('',#523847); +#527084 = OVER_RIDING_STYLED_ITEM('overriding color',(#527085),#47304, + #524051); +#527085 = PRESENTATION_STYLE_ASSIGNMENT((#527086)); +#527086 = SURFACE_STYLE_USAGE(.BOTH.,#527087); +#527087 = SURFACE_SIDE_STYLE('',(#527088)); +#527088 = SURFACE_STYLE_FILL_AREA(#527089); +#527089 = FILL_AREA_STYLE('',(#527090)); +#527090 = FILL_AREA_STYLE_COLOUR('',#523847); +#527091 = OVER_RIDING_STYLED_ITEM('overriding color',(#527092),#47316, + #524051); +#527092 = PRESENTATION_STYLE_ASSIGNMENT((#527093)); +#527093 = SURFACE_STYLE_USAGE(.BOTH.,#527094); +#527094 = SURFACE_SIDE_STYLE('',(#527095)); +#527095 = SURFACE_STYLE_FILL_AREA(#527096); +#527096 = FILL_AREA_STYLE('',(#527097)); +#527097 = FILL_AREA_STYLE_COLOUR('',#523847); +#527098 = OVER_RIDING_STYLED_ITEM('overriding color',(#527099),#47328, + #524051); +#527099 = PRESENTATION_STYLE_ASSIGNMENT((#527100)); +#527100 = SURFACE_STYLE_USAGE(.BOTH.,#527101); +#527101 = SURFACE_SIDE_STYLE('',(#527102)); +#527102 = SURFACE_STYLE_FILL_AREA(#527103); +#527103 = FILL_AREA_STYLE('',(#527104)); +#527104 = FILL_AREA_STYLE_COLOUR('',#523847); +#527105 = OVER_RIDING_STYLED_ITEM('overriding color',(#527106),#47340, + #524051); +#527106 = PRESENTATION_STYLE_ASSIGNMENT((#527107)); +#527107 = SURFACE_STYLE_USAGE(.BOTH.,#527108); +#527108 = SURFACE_SIDE_STYLE('',(#527109)); +#527109 = SURFACE_STYLE_FILL_AREA(#527110); +#527110 = FILL_AREA_STYLE('',(#527111)); +#527111 = FILL_AREA_STYLE_COLOUR('',#523847); +#527112 = OVER_RIDING_STYLED_ITEM('overriding color',(#527113),#47352, + #524051); +#527113 = PRESENTATION_STYLE_ASSIGNMENT((#527114)); +#527114 = SURFACE_STYLE_USAGE(.BOTH.,#527115); +#527115 = SURFACE_SIDE_STYLE('',(#527116)); +#527116 = SURFACE_STYLE_FILL_AREA(#527117); +#527117 = FILL_AREA_STYLE('',(#527118)); +#527118 = FILL_AREA_STYLE_COLOUR('',#523847); +#527119 = OVER_RIDING_STYLED_ITEM('overriding color',(#527120),#47364, + #524051); +#527120 = PRESENTATION_STYLE_ASSIGNMENT((#527121)); +#527121 = SURFACE_STYLE_USAGE(.BOTH.,#527122); +#527122 = SURFACE_SIDE_STYLE('',(#527123)); +#527123 = SURFACE_STYLE_FILL_AREA(#527124); +#527124 = FILL_AREA_STYLE('',(#527125)); +#527125 = FILL_AREA_STYLE_COLOUR('',#523847); +#527126 = OVER_RIDING_STYLED_ITEM('overriding color',(#527127),#47376, + #524051); +#527127 = PRESENTATION_STYLE_ASSIGNMENT((#527128)); +#527128 = SURFACE_STYLE_USAGE(.BOTH.,#527129); +#527129 = SURFACE_SIDE_STYLE('',(#527130)); +#527130 = SURFACE_STYLE_FILL_AREA(#527131); +#527131 = FILL_AREA_STYLE('',(#527132)); +#527132 = FILL_AREA_STYLE_COLOUR('',#523847); +#527133 = OVER_RIDING_STYLED_ITEM('overriding color',(#527134),#47388, + #524051); +#527134 = PRESENTATION_STYLE_ASSIGNMENT((#527135)); +#527135 = SURFACE_STYLE_USAGE(.BOTH.,#527136); +#527136 = SURFACE_SIDE_STYLE('',(#527137)); +#527137 = SURFACE_STYLE_FILL_AREA(#527138); +#527138 = FILL_AREA_STYLE('',(#527139)); +#527139 = FILL_AREA_STYLE_COLOUR('',#523847); +#527140 = OVER_RIDING_STYLED_ITEM('overriding color',(#527141),#47400, + #524051); +#527141 = PRESENTATION_STYLE_ASSIGNMENT((#527142)); +#527142 = SURFACE_STYLE_USAGE(.BOTH.,#527143); +#527143 = SURFACE_SIDE_STYLE('',(#527144)); +#527144 = SURFACE_STYLE_FILL_AREA(#527145); +#527145 = FILL_AREA_STYLE('',(#527146)); +#527146 = FILL_AREA_STYLE_COLOUR('',#523847); +#527147 = OVER_RIDING_STYLED_ITEM('overriding color',(#527148),#47412, + #524051); +#527148 = PRESENTATION_STYLE_ASSIGNMENT((#527149)); +#527149 = SURFACE_STYLE_USAGE(.BOTH.,#527150); +#527150 = SURFACE_SIDE_STYLE('',(#527151)); +#527151 = SURFACE_STYLE_FILL_AREA(#527152); +#527152 = FILL_AREA_STYLE('',(#527153)); +#527153 = FILL_AREA_STYLE_COLOUR('',#523847); +#527154 = OVER_RIDING_STYLED_ITEM('overriding color',(#527155),#47424, + #524051); +#527155 = PRESENTATION_STYLE_ASSIGNMENT((#527156)); +#527156 = SURFACE_STYLE_USAGE(.BOTH.,#527157); +#527157 = SURFACE_SIDE_STYLE('',(#527158)); +#527158 = SURFACE_STYLE_FILL_AREA(#527159); +#527159 = FILL_AREA_STYLE('',(#527160)); +#527160 = FILL_AREA_STYLE_COLOUR('',#523847); +#527161 = OVER_RIDING_STYLED_ITEM('overriding color',(#527162),#47436, + #524051); +#527162 = PRESENTATION_STYLE_ASSIGNMENT((#527163)); +#527163 = SURFACE_STYLE_USAGE(.BOTH.,#527164); +#527164 = SURFACE_SIDE_STYLE('',(#527165)); +#527165 = SURFACE_STYLE_FILL_AREA(#527166); +#527166 = FILL_AREA_STYLE('',(#527167)); +#527167 = FILL_AREA_STYLE_COLOUR('',#523847); +#527168 = OVER_RIDING_STYLED_ITEM('overriding color',(#527169),#47448, + #524051); +#527169 = PRESENTATION_STYLE_ASSIGNMENT((#527170)); +#527170 = SURFACE_STYLE_USAGE(.BOTH.,#527171); +#527171 = SURFACE_SIDE_STYLE('',(#527172)); +#527172 = SURFACE_STYLE_FILL_AREA(#527173); +#527173 = FILL_AREA_STYLE('',(#527174)); +#527174 = FILL_AREA_STYLE_COLOUR('',#523847); +#527175 = OVER_RIDING_STYLED_ITEM('overriding color',(#527176),#47460, + #524051); +#527176 = PRESENTATION_STYLE_ASSIGNMENT((#527177)); +#527177 = SURFACE_STYLE_USAGE(.BOTH.,#527178); +#527178 = SURFACE_SIDE_STYLE('',(#527179)); +#527179 = SURFACE_STYLE_FILL_AREA(#527180); +#527180 = FILL_AREA_STYLE('',(#527181)); +#527181 = FILL_AREA_STYLE_COLOUR('',#523847); +#527182 = OVER_RIDING_STYLED_ITEM('overriding color',(#527183),#47472, + #524051); +#527183 = PRESENTATION_STYLE_ASSIGNMENT((#527184)); +#527184 = SURFACE_STYLE_USAGE(.BOTH.,#527185); +#527185 = SURFACE_SIDE_STYLE('',(#527186)); +#527186 = SURFACE_STYLE_FILL_AREA(#527187); +#527187 = FILL_AREA_STYLE('',(#527188)); +#527188 = FILL_AREA_STYLE_COLOUR('',#523847); +#527189 = OVER_RIDING_STYLED_ITEM('overriding color',(#527190),#47484, + #524051); +#527190 = PRESENTATION_STYLE_ASSIGNMENT((#527191)); +#527191 = SURFACE_STYLE_USAGE(.BOTH.,#527192); +#527192 = SURFACE_SIDE_STYLE('',(#527193)); +#527193 = SURFACE_STYLE_FILL_AREA(#527194); +#527194 = FILL_AREA_STYLE('',(#527195)); +#527195 = FILL_AREA_STYLE_COLOUR('',#523847); +#527196 = OVER_RIDING_STYLED_ITEM('overriding color',(#527197),#47496, + #524051); +#527197 = PRESENTATION_STYLE_ASSIGNMENT((#527198)); +#527198 = SURFACE_STYLE_USAGE(.BOTH.,#527199); +#527199 = SURFACE_SIDE_STYLE('',(#527200)); +#527200 = SURFACE_STYLE_FILL_AREA(#527201); +#527201 = FILL_AREA_STYLE('',(#527202)); +#527202 = FILL_AREA_STYLE_COLOUR('',#523847); +#527203 = OVER_RIDING_STYLED_ITEM('overriding color',(#527204),#47508, + #524051); +#527204 = PRESENTATION_STYLE_ASSIGNMENT((#527205)); +#527205 = SURFACE_STYLE_USAGE(.BOTH.,#527206); +#527206 = SURFACE_SIDE_STYLE('',(#527207)); +#527207 = SURFACE_STYLE_FILL_AREA(#527208); +#527208 = FILL_AREA_STYLE('',(#527209)); +#527209 = FILL_AREA_STYLE_COLOUR('',#523847); +#527210 = OVER_RIDING_STYLED_ITEM('overriding color',(#527211),#47520, + #524051); +#527211 = PRESENTATION_STYLE_ASSIGNMENT((#527212)); +#527212 = SURFACE_STYLE_USAGE(.BOTH.,#527213); +#527213 = SURFACE_SIDE_STYLE('',(#527214)); +#527214 = SURFACE_STYLE_FILL_AREA(#527215); +#527215 = FILL_AREA_STYLE('',(#527216)); +#527216 = FILL_AREA_STYLE_COLOUR('',#523847); +#527217 = STYLED_ITEM('color',(#527218),#47532); +#527218 = PRESENTATION_STYLE_ASSIGNMENT((#527219,#527224)); +#527219 = SURFACE_STYLE_USAGE(.BOTH.,#527220); +#527220 = SURFACE_SIDE_STYLE('',(#527221)); +#527221 = SURFACE_STYLE_FILL_AREA(#527222); +#527222 = FILL_AREA_STYLE('',(#527223)); +#527223 = FILL_AREA_STYLE_COLOUR('',#523837); +#527224 = CURVE_STYLE('',#527225,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527225 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527226 = OVER_RIDING_STYLED_ITEM('overriding color',(#527227),#47534, + #527217); +#527227 = PRESENTATION_STYLE_ASSIGNMENT((#527228)); +#527228 = SURFACE_STYLE_USAGE(.BOTH.,#527229); +#527229 = SURFACE_SIDE_STYLE('',(#527230)); +#527230 = SURFACE_STYLE_FILL_AREA(#527231); +#527231 = FILL_AREA_STYLE('',(#527232)); +#527232 = FILL_AREA_STYLE_COLOUR('',#527233); +#527233 = COLOUR_RGB('',0.372321987396,0.371574020205,0.373173001298); +#527234 = OVER_RIDING_STYLED_ITEM('overriding color',(#527235),#47574, + #527217); +#527235 = PRESENTATION_STYLE_ASSIGNMENT((#527236)); +#527236 = SURFACE_STYLE_USAGE(.BOTH.,#527237); +#527237 = SURFACE_SIDE_STYLE('',(#527238)); +#527238 = SURFACE_STYLE_FILL_AREA(#527239); +#527239 = FILL_AREA_STYLE('',(#527240)); +#527240 = FILL_AREA_STYLE_COLOUR('',#527233); +#527241 = OVER_RIDING_STYLED_ITEM('overriding color',(#527242),#47641, + #527217); +#527242 = PRESENTATION_STYLE_ASSIGNMENT((#527243)); +#527243 = SURFACE_STYLE_USAGE(.BOTH.,#527244); +#527244 = SURFACE_SIDE_STYLE('',(#527245)); +#527245 = SURFACE_STYLE_FILL_AREA(#527246); +#527246 = FILL_AREA_STYLE('',(#527247)); +#527247 = FILL_AREA_STYLE_COLOUR('',#527233); +#527248 = OVER_RIDING_STYLED_ITEM('overriding color',(#527249),#47666, + #527217); +#527249 = PRESENTATION_STYLE_ASSIGNMENT((#527250)); +#527250 = SURFACE_STYLE_USAGE(.BOTH.,#527251); +#527251 = SURFACE_SIDE_STYLE('',(#527252)); +#527252 = SURFACE_STYLE_FILL_AREA(#527253); +#527253 = FILL_AREA_STYLE('',(#527254)); +#527254 = FILL_AREA_STYLE_COLOUR('',#527233); +#527255 = OVER_RIDING_STYLED_ITEM('overriding color',(#527256),#47691, + #527217); +#527256 = PRESENTATION_STYLE_ASSIGNMENT((#527257)); +#527257 = SURFACE_STYLE_USAGE(.BOTH.,#527258); +#527258 = SURFACE_SIDE_STYLE('',(#527259)); +#527259 = SURFACE_STYLE_FILL_AREA(#527260); +#527260 = FILL_AREA_STYLE('',(#527261)); +#527261 = FILL_AREA_STYLE_COLOUR('',#527233); +#527262 = OVER_RIDING_STYLED_ITEM('overriding color',(#527263),#47724, + #527217); +#527263 = PRESENTATION_STYLE_ASSIGNMENT((#527264)); +#527264 = SURFACE_STYLE_USAGE(.BOTH.,#527265); +#527265 = SURFACE_SIDE_STYLE('',(#527266)); +#527266 = SURFACE_STYLE_FILL_AREA(#527267); +#527267 = FILL_AREA_STYLE('',(#527268)); +#527268 = FILL_AREA_STYLE_COLOUR('',#527233); +#527269 = OVER_RIDING_STYLED_ITEM('overriding color',(#527270),#47748, + #527217); +#527270 = PRESENTATION_STYLE_ASSIGNMENT((#527271)); +#527271 = SURFACE_STYLE_USAGE(.BOTH.,#527272); +#527272 = SURFACE_SIDE_STYLE('',(#527273)); +#527273 = SURFACE_STYLE_FILL_AREA(#527274); +#527274 = FILL_AREA_STYLE('',(#527275)); +#527275 = FILL_AREA_STYLE_COLOUR('',#527233); +#527276 = OVER_RIDING_STYLED_ITEM('overriding color',(#527277),#47772, + #527217); +#527277 = PRESENTATION_STYLE_ASSIGNMENT((#527278)); +#527278 = SURFACE_STYLE_USAGE(.BOTH.,#527279); +#527279 = SURFACE_SIDE_STYLE('',(#527280)); +#527280 = SURFACE_STYLE_FILL_AREA(#527281); +#527281 = FILL_AREA_STYLE('',(#527282)); +#527282 = FILL_AREA_STYLE_COLOUR('',#527233); +#527283 = OVER_RIDING_STYLED_ITEM('overriding color',(#527284),#47797, + #527217); +#527284 = PRESENTATION_STYLE_ASSIGNMENT((#527285)); +#527285 = SURFACE_STYLE_USAGE(.BOTH.,#527286); +#527286 = SURFACE_SIDE_STYLE('',(#527287)); +#527287 = SURFACE_STYLE_FILL_AREA(#527288); +#527288 = FILL_AREA_STYLE('',(#527289)); +#527289 = FILL_AREA_STYLE_COLOUR('',#527233); +#527290 = OVER_RIDING_STYLED_ITEM('overriding color',(#527291),#47822, + #527217); +#527291 = PRESENTATION_STYLE_ASSIGNMENT((#527292)); +#527292 = SURFACE_STYLE_USAGE(.BOTH.,#527293); +#527293 = SURFACE_SIDE_STYLE('',(#527294)); +#527294 = SURFACE_STYLE_FILL_AREA(#527295); +#527295 = FILL_AREA_STYLE('',(#527296)); +#527296 = FILL_AREA_STYLE_COLOUR('',#527233); +#527297 = OVER_RIDING_STYLED_ITEM('overriding color',(#527298),#47839, + #527217); +#527298 = PRESENTATION_STYLE_ASSIGNMENT((#527299)); +#527299 = SURFACE_STYLE_USAGE(.BOTH.,#527300); +#527300 = SURFACE_SIDE_STYLE('',(#527301)); +#527301 = SURFACE_STYLE_FILL_AREA(#527302); +#527302 = FILL_AREA_STYLE('',(#527303)); +#527303 = FILL_AREA_STYLE_COLOUR('',#527233); +#527304 = OVER_RIDING_STYLED_ITEM('overriding color',(#527305),#47856, + #527217); +#527305 = PRESENTATION_STYLE_ASSIGNMENT((#527306)); +#527306 = SURFACE_STYLE_USAGE(.BOTH.,#527307); +#527307 = SURFACE_SIDE_STYLE('',(#527308)); +#527308 = SURFACE_STYLE_FILL_AREA(#527309); +#527309 = FILL_AREA_STYLE('',(#527310)); +#527310 = FILL_AREA_STYLE_COLOUR('',#527233); +#527311 = OVER_RIDING_STYLED_ITEM('overriding color',(#527312),#47873, + #527217); +#527312 = PRESENTATION_STYLE_ASSIGNMENT((#527313)); +#527313 = SURFACE_STYLE_USAGE(.BOTH.,#527314); +#527314 = SURFACE_SIDE_STYLE('',(#527315)); +#527315 = SURFACE_STYLE_FILL_AREA(#527316); +#527316 = FILL_AREA_STYLE('',(#527317)); +#527317 = FILL_AREA_STYLE_COLOUR('',#527233); +#527318 = OVER_RIDING_STYLED_ITEM('overriding color',(#527319),#47915, + #527217); +#527319 = PRESENTATION_STYLE_ASSIGNMENT((#527320)); +#527320 = SURFACE_STYLE_USAGE(.BOTH.,#527321); +#527321 = SURFACE_SIDE_STYLE('',(#527322)); +#527322 = SURFACE_STYLE_FILL_AREA(#527323); +#527323 = FILL_AREA_STYLE('',(#527324)); +#527324 = FILL_AREA_STYLE_COLOUR('',#527233); +#527325 = OVER_RIDING_STYLED_ITEM('overriding color',(#527326),#47933, + #527217); +#527326 = PRESENTATION_STYLE_ASSIGNMENT((#527327)); +#527327 = SURFACE_STYLE_USAGE(.BOTH.,#527328); +#527328 = SURFACE_SIDE_STYLE('',(#527329)); +#527329 = SURFACE_STYLE_FILL_AREA(#527330); +#527330 = FILL_AREA_STYLE('',(#527331)); +#527331 = FILL_AREA_STYLE_COLOUR('',#527233); +#527332 = OVER_RIDING_STYLED_ITEM('overriding color',(#527333),#47951, + #527217); +#527333 = PRESENTATION_STYLE_ASSIGNMENT((#527334)); +#527334 = SURFACE_STYLE_USAGE(.BOTH.,#527335); +#527335 = SURFACE_SIDE_STYLE('',(#527336)); +#527336 = SURFACE_STYLE_FILL_AREA(#527337); +#527337 = FILL_AREA_STYLE('',(#527338)); +#527338 = FILL_AREA_STYLE_COLOUR('',#527233); +#527339 = OVER_RIDING_STYLED_ITEM('overriding color',(#527340),#47968, + #527217); +#527340 = PRESENTATION_STYLE_ASSIGNMENT((#527341)); +#527341 = SURFACE_STYLE_USAGE(.BOTH.,#527342); +#527342 = SURFACE_SIDE_STYLE('',(#527343)); +#527343 = SURFACE_STYLE_FILL_AREA(#527344); +#527344 = FILL_AREA_STYLE('',(#527345)); +#527345 = FILL_AREA_STYLE_COLOUR('',#527233); +#527346 = OVER_RIDING_STYLED_ITEM('overriding color',(#527347),#47985, + #527217); +#527347 = PRESENTATION_STYLE_ASSIGNMENT((#527348)); +#527348 = SURFACE_STYLE_USAGE(.BOTH.,#527349); +#527349 = SURFACE_SIDE_STYLE('',(#527350)); +#527350 = SURFACE_STYLE_FILL_AREA(#527351); +#527351 = FILL_AREA_STYLE('',(#527352)); +#527352 = FILL_AREA_STYLE_COLOUR('',#527233); +#527353 = OVER_RIDING_STYLED_ITEM('overriding color',(#527354),#47997, + #527217); +#527354 = PRESENTATION_STYLE_ASSIGNMENT((#527355)); +#527355 = SURFACE_STYLE_USAGE(.BOTH.,#527356); +#527356 = SURFACE_SIDE_STYLE('',(#527357)); +#527357 = SURFACE_STYLE_FILL_AREA(#527358); +#527358 = FILL_AREA_STYLE('',(#527359)); +#527359 = FILL_AREA_STYLE_COLOUR('',#527233); +#527360 = OVER_RIDING_STYLED_ITEM('overriding color',(#527361),#48022, + #527217); +#527361 = PRESENTATION_STYLE_ASSIGNMENT((#527362)); +#527362 = SURFACE_STYLE_USAGE(.BOTH.,#527363); +#527363 = SURFACE_SIDE_STYLE('',(#527364)); +#527364 = SURFACE_STYLE_FILL_AREA(#527365); +#527365 = FILL_AREA_STYLE('',(#527366)); +#527366 = FILL_AREA_STYLE_COLOUR('',#527233); +#527367 = STYLED_ITEM('color',(#527368),#48031); +#527368 = PRESENTATION_STYLE_ASSIGNMENT((#527369,#527374)); +#527369 = SURFACE_STYLE_USAGE(.BOTH.,#527370); +#527370 = SURFACE_SIDE_STYLE('',(#527371)); +#527371 = SURFACE_STYLE_FILL_AREA(#527372); +#527372 = FILL_AREA_STYLE('',(#527373)); +#527373 = FILL_AREA_STYLE_COLOUR('',#523837); +#527374 = CURVE_STYLE('',#527375,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527375 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527376 = OVER_RIDING_STYLED_ITEM('overriding color',(#527377),#48033, + #527367); +#527377 = PRESENTATION_STYLE_ASSIGNMENT((#527378)); +#527378 = SURFACE_STYLE_USAGE(.BOTH.,#527379); +#527379 = SURFACE_SIDE_STYLE('',(#527380)); +#527380 = SURFACE_STYLE_FILL_AREA(#527381); +#527381 = FILL_AREA_STYLE('',(#527382)); +#527382 = FILL_AREA_STYLE_COLOUR('',#517768); +#527383 = OVER_RIDING_STYLED_ITEM('overriding color',(#527384),#48073, + #527367); +#527384 = PRESENTATION_STYLE_ASSIGNMENT((#527385)); +#527385 = SURFACE_STYLE_USAGE(.BOTH.,#527386); +#527386 = SURFACE_SIDE_STYLE('',(#527387)); +#527387 = SURFACE_STYLE_FILL_AREA(#527388); +#527388 = FILL_AREA_STYLE('',(#527389)); +#527389 = FILL_AREA_STYLE_COLOUR('',#517768); +#527390 = OVER_RIDING_STYLED_ITEM('overriding color',(#527391),#48104, + #527367); +#527391 = PRESENTATION_STYLE_ASSIGNMENT((#527392)); +#527392 = SURFACE_STYLE_USAGE(.BOTH.,#527393); +#527393 = SURFACE_SIDE_STYLE('',(#527394)); +#527394 = SURFACE_STYLE_FILL_AREA(#527395); +#527395 = FILL_AREA_STYLE('',(#527396)); +#527396 = FILL_AREA_STYLE_COLOUR('',#517768); +#527397 = OVER_RIDING_STYLED_ITEM('overriding color',(#527398),#48135, + #527367); +#527398 = PRESENTATION_STYLE_ASSIGNMENT((#527399)); +#527399 = SURFACE_STYLE_USAGE(.BOTH.,#527400); +#527400 = SURFACE_SIDE_STYLE('',(#527401)); +#527401 = SURFACE_STYLE_FILL_AREA(#527402); +#527402 = FILL_AREA_STYLE('',(#527403)); +#527403 = FILL_AREA_STYLE_COLOUR('',#517768); +#527404 = OVER_RIDING_STYLED_ITEM('overriding color',(#527405),#48185, + #527367); +#527405 = PRESENTATION_STYLE_ASSIGNMENT((#527406)); +#527406 = SURFACE_STYLE_USAGE(.BOTH.,#527407); +#527407 = SURFACE_SIDE_STYLE('',(#527408)); +#527408 = SURFACE_STYLE_FILL_AREA(#527409); +#527409 = FILL_AREA_STYLE('',(#527410)); +#527410 = FILL_AREA_STYLE_COLOUR('',#517768); +#527411 = OVER_RIDING_STYLED_ITEM('overriding color',(#527412),#48216, + #527367); +#527412 = PRESENTATION_STYLE_ASSIGNMENT((#527413)); +#527413 = SURFACE_STYLE_USAGE(.BOTH.,#527414); +#527414 = SURFACE_SIDE_STYLE('',(#527415)); +#527415 = SURFACE_STYLE_FILL_AREA(#527416); +#527416 = FILL_AREA_STYLE('',(#527417)); +#527417 = FILL_AREA_STYLE_COLOUR('',#517768); +#527418 = OVER_RIDING_STYLED_ITEM('overriding color',(#527419),#48249, + #527367); +#527419 = PRESENTATION_STYLE_ASSIGNMENT((#527420)); +#527420 = SURFACE_STYLE_USAGE(.BOTH.,#527421); +#527421 = SURFACE_SIDE_STYLE('',(#527422)); +#527422 = SURFACE_STYLE_FILL_AREA(#527423); +#527423 = FILL_AREA_STYLE('',(#527424)); +#527424 = FILL_AREA_STYLE_COLOUR('',#517768); +#527425 = OVER_RIDING_STYLED_ITEM('overriding color',(#527426),#48266, + #527367); +#527426 = PRESENTATION_STYLE_ASSIGNMENT((#527427)); +#527427 = SURFACE_STYLE_USAGE(.BOTH.,#527428); +#527428 = SURFACE_SIDE_STYLE('',(#527429)); +#527429 = SURFACE_STYLE_FILL_AREA(#527430); +#527430 = FILL_AREA_STYLE('',(#527431)); +#527431 = FILL_AREA_STYLE_COLOUR('',#517768); +#527432 = OVER_RIDING_STYLED_ITEM('overriding color',(#527433),#48290, + #527367); +#527433 = PRESENTATION_STYLE_ASSIGNMENT((#527434)); +#527434 = SURFACE_STYLE_USAGE(.BOTH.,#527435); +#527435 = SURFACE_SIDE_STYLE('',(#527436)); +#527436 = SURFACE_STYLE_FILL_AREA(#527437); +#527437 = FILL_AREA_STYLE('',(#527438)); +#527438 = FILL_AREA_STYLE_COLOUR('',#517768); +#527439 = OVER_RIDING_STYLED_ITEM('overriding color',(#527440),#48321, + #527367); +#527440 = PRESENTATION_STYLE_ASSIGNMENT((#527441)); +#527441 = SURFACE_STYLE_USAGE(.BOTH.,#527442); +#527442 = SURFACE_SIDE_STYLE('',(#527443)); +#527443 = SURFACE_STYLE_FILL_AREA(#527444); +#527444 = FILL_AREA_STYLE('',(#527445)); +#527445 = FILL_AREA_STYLE_COLOUR('',#517768); +#527446 = OVER_RIDING_STYLED_ITEM('overriding color',(#527447),#48338, + #527367); +#527447 = PRESENTATION_STYLE_ASSIGNMENT((#527448)); +#527448 = SURFACE_STYLE_USAGE(.BOTH.,#527449); +#527449 = SURFACE_SIDE_STYLE('',(#527450)); +#527450 = SURFACE_STYLE_FILL_AREA(#527451); +#527451 = FILL_AREA_STYLE('',(#527452)); +#527452 = FILL_AREA_STYLE_COLOUR('',#517768); +#527453 = OVER_RIDING_STYLED_ITEM('overriding color',(#527454),#48367, + #527367); +#527454 = PRESENTATION_STYLE_ASSIGNMENT((#527455)); +#527455 = SURFACE_STYLE_USAGE(.BOTH.,#527456); +#527456 = SURFACE_SIDE_STYLE('',(#527457)); +#527457 = SURFACE_STYLE_FILL_AREA(#527458); +#527458 = FILL_AREA_STYLE('',(#527459)); +#527459 = FILL_AREA_STYLE_COLOUR('',#517768); +#527460 = OVER_RIDING_STYLED_ITEM('overriding color',(#527461),#48391, + #527367); +#527461 = PRESENTATION_STYLE_ASSIGNMENT((#527462)); +#527462 = SURFACE_STYLE_USAGE(.BOTH.,#527463); +#527463 = SURFACE_SIDE_STYLE('',(#527464)); +#527464 = SURFACE_STYLE_FILL_AREA(#527465); +#527465 = FILL_AREA_STYLE('',(#527466)); +#527466 = FILL_AREA_STYLE_COLOUR('',#517768); +#527467 = OVER_RIDING_STYLED_ITEM('overriding color',(#527468),#48417, + #527367); +#527468 = PRESENTATION_STYLE_ASSIGNMENT((#527469)); +#527469 = SURFACE_STYLE_USAGE(.BOTH.,#527470); +#527470 = SURFACE_SIDE_STYLE('',(#527471)); +#527471 = SURFACE_STYLE_FILL_AREA(#527472); +#527472 = FILL_AREA_STYLE('',(#527473)); +#527473 = FILL_AREA_STYLE_COLOUR('',#517768); +#527474 = OVER_RIDING_STYLED_ITEM('overriding color',(#527475),#48441, + #527367); +#527475 = PRESENTATION_STYLE_ASSIGNMENT((#527476)); +#527476 = SURFACE_STYLE_USAGE(.BOTH.,#527477); +#527477 = SURFACE_SIDE_STYLE('',(#527478)); +#527478 = SURFACE_STYLE_FILL_AREA(#527479); +#527479 = FILL_AREA_STYLE('',(#527480)); +#527480 = FILL_AREA_STYLE_COLOUR('',#517768); +#527481 = OVER_RIDING_STYLED_ITEM('overriding color',(#527482),#48468, + #527367); +#527482 = PRESENTATION_STYLE_ASSIGNMENT((#527483)); +#527483 = SURFACE_STYLE_USAGE(.BOTH.,#527484); +#527484 = SURFACE_SIDE_STYLE('',(#527485)); +#527485 = SURFACE_STYLE_FILL_AREA(#527486); +#527486 = FILL_AREA_STYLE('',(#527487)); +#527487 = FILL_AREA_STYLE_COLOUR('',#517768); +#527488 = OVER_RIDING_STYLED_ITEM('overriding color',(#527489),#48480, + #527367); +#527489 = PRESENTATION_STYLE_ASSIGNMENT((#527490)); +#527490 = SURFACE_STYLE_USAGE(.BOTH.,#527491); +#527491 = SURFACE_SIDE_STYLE('',(#527492)); +#527492 = SURFACE_STYLE_FILL_AREA(#527493); +#527493 = FILL_AREA_STYLE('',(#527494)); +#527494 = FILL_AREA_STYLE_COLOUR('',#517768); +#527495 = OVER_RIDING_STYLED_ITEM('overriding color',(#527496),#48497, + #527367); +#527496 = PRESENTATION_STYLE_ASSIGNMENT((#527497)); +#527497 = SURFACE_STYLE_USAGE(.BOTH.,#527498); +#527498 = SURFACE_SIDE_STYLE('',(#527499)); +#527499 = SURFACE_STYLE_FILL_AREA(#527500); +#527500 = FILL_AREA_STYLE('',(#527501)); +#527501 = FILL_AREA_STYLE_COLOUR('',#517768); +#527502 = STYLED_ITEM('color',(#527503),#48509); +#527503 = PRESENTATION_STYLE_ASSIGNMENT((#527504,#527509)); +#527504 = SURFACE_STYLE_USAGE(.BOTH.,#527505); +#527505 = SURFACE_SIDE_STYLE('',(#527506)); +#527506 = SURFACE_STYLE_FILL_AREA(#527507); +#527507 = FILL_AREA_STYLE('',(#527508)); +#527508 = FILL_AREA_STYLE_COLOUR('',#523837); +#527509 = CURVE_STYLE('',#527510,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527510 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527511 = OVER_RIDING_STYLED_ITEM('overriding color',(#527512),#48511, + #527502); +#527512 = PRESENTATION_STYLE_ASSIGNMENT((#527513)); +#527513 = SURFACE_STYLE_USAGE(.BOTH.,#527514); +#527514 = SURFACE_SIDE_STYLE('',(#527515)); +#527515 = SURFACE_STYLE_FILL_AREA(#527516); +#527516 = FILL_AREA_STYLE('',(#527517)); +#527517 = FILL_AREA_STYLE_COLOUR('',#517768); +#527518 = OVER_RIDING_STYLED_ITEM('overriding color',(#527519),#48551, + #527502); +#527519 = PRESENTATION_STYLE_ASSIGNMENT((#527520)); +#527520 = SURFACE_STYLE_USAGE(.BOTH.,#527521); +#527521 = SURFACE_SIDE_STYLE('',(#527522)); +#527522 = SURFACE_STYLE_FILL_AREA(#527523); +#527523 = FILL_AREA_STYLE('',(#527524)); +#527524 = FILL_AREA_STYLE_COLOUR('',#517768); +#527525 = OVER_RIDING_STYLED_ITEM('overriding color',(#527526),#48582, + #527502); +#527526 = PRESENTATION_STYLE_ASSIGNMENT((#527527)); +#527527 = SURFACE_STYLE_USAGE(.BOTH.,#527528); +#527528 = SURFACE_SIDE_STYLE('',(#527529)); +#527529 = SURFACE_STYLE_FILL_AREA(#527530); +#527530 = FILL_AREA_STYLE('',(#527531)); +#527531 = FILL_AREA_STYLE_COLOUR('',#517768); +#527532 = OVER_RIDING_STYLED_ITEM('overriding color',(#527533),#48613, + #527502); +#527533 = PRESENTATION_STYLE_ASSIGNMENT((#527534)); +#527534 = SURFACE_STYLE_USAGE(.BOTH.,#527535); +#527535 = SURFACE_SIDE_STYLE('',(#527536)); +#527536 = SURFACE_STYLE_FILL_AREA(#527537); +#527537 = FILL_AREA_STYLE('',(#527538)); +#527538 = FILL_AREA_STYLE_COLOUR('',#517768); +#527539 = OVER_RIDING_STYLED_ITEM('overriding color',(#527540),#48663, + #527502); +#527540 = PRESENTATION_STYLE_ASSIGNMENT((#527541)); +#527541 = SURFACE_STYLE_USAGE(.BOTH.,#527542); +#527542 = SURFACE_SIDE_STYLE('',(#527543)); +#527543 = SURFACE_STYLE_FILL_AREA(#527544); +#527544 = FILL_AREA_STYLE('',(#527545)); +#527545 = FILL_AREA_STYLE_COLOUR('',#517768); +#527546 = OVER_RIDING_STYLED_ITEM('overriding color',(#527547),#48694, + #527502); +#527547 = PRESENTATION_STYLE_ASSIGNMENT((#527548)); +#527548 = SURFACE_STYLE_USAGE(.BOTH.,#527549); +#527549 = SURFACE_SIDE_STYLE('',(#527550)); +#527550 = SURFACE_STYLE_FILL_AREA(#527551); +#527551 = FILL_AREA_STYLE('',(#527552)); +#527552 = FILL_AREA_STYLE_COLOUR('',#517768); +#527553 = OVER_RIDING_STYLED_ITEM('overriding color',(#527554),#48727, + #527502); +#527554 = PRESENTATION_STYLE_ASSIGNMENT((#527555)); +#527555 = SURFACE_STYLE_USAGE(.BOTH.,#527556); +#527556 = SURFACE_SIDE_STYLE('',(#527557)); +#527557 = SURFACE_STYLE_FILL_AREA(#527558); +#527558 = FILL_AREA_STYLE('',(#527559)); +#527559 = FILL_AREA_STYLE_COLOUR('',#517768); +#527560 = OVER_RIDING_STYLED_ITEM('overriding color',(#527561),#48744, + #527502); +#527561 = PRESENTATION_STYLE_ASSIGNMENT((#527562)); +#527562 = SURFACE_STYLE_USAGE(.BOTH.,#527563); +#527563 = SURFACE_SIDE_STYLE('',(#527564)); +#527564 = SURFACE_STYLE_FILL_AREA(#527565); +#527565 = FILL_AREA_STYLE('',(#527566)); +#527566 = FILL_AREA_STYLE_COLOUR('',#517768); +#527567 = OVER_RIDING_STYLED_ITEM('overriding color',(#527568),#48768, + #527502); +#527568 = PRESENTATION_STYLE_ASSIGNMENT((#527569)); +#527569 = SURFACE_STYLE_USAGE(.BOTH.,#527570); +#527570 = SURFACE_SIDE_STYLE('',(#527571)); +#527571 = SURFACE_STYLE_FILL_AREA(#527572); +#527572 = FILL_AREA_STYLE('',(#527573)); +#527573 = FILL_AREA_STYLE_COLOUR('',#517768); +#527574 = OVER_RIDING_STYLED_ITEM('overriding color',(#527575),#48799, + #527502); +#527575 = PRESENTATION_STYLE_ASSIGNMENT((#527576)); +#527576 = SURFACE_STYLE_USAGE(.BOTH.,#527577); +#527577 = SURFACE_SIDE_STYLE('',(#527578)); +#527578 = SURFACE_STYLE_FILL_AREA(#527579); +#527579 = FILL_AREA_STYLE('',(#527580)); +#527580 = FILL_AREA_STYLE_COLOUR('',#517768); +#527581 = OVER_RIDING_STYLED_ITEM('overriding color',(#527582),#48816, + #527502); +#527582 = PRESENTATION_STYLE_ASSIGNMENT((#527583)); +#527583 = SURFACE_STYLE_USAGE(.BOTH.,#527584); +#527584 = SURFACE_SIDE_STYLE('',(#527585)); +#527585 = SURFACE_STYLE_FILL_AREA(#527586); +#527586 = FILL_AREA_STYLE('',(#527587)); +#527587 = FILL_AREA_STYLE_COLOUR('',#517768); +#527588 = OVER_RIDING_STYLED_ITEM('overriding color',(#527589),#48845, + #527502); +#527589 = PRESENTATION_STYLE_ASSIGNMENT((#527590)); +#527590 = SURFACE_STYLE_USAGE(.BOTH.,#527591); +#527591 = SURFACE_SIDE_STYLE('',(#527592)); +#527592 = SURFACE_STYLE_FILL_AREA(#527593); +#527593 = FILL_AREA_STYLE('',(#527594)); +#527594 = FILL_AREA_STYLE_COLOUR('',#517768); +#527595 = OVER_RIDING_STYLED_ITEM('overriding color',(#527596),#48869, + #527502); +#527596 = PRESENTATION_STYLE_ASSIGNMENT((#527597)); +#527597 = SURFACE_STYLE_USAGE(.BOTH.,#527598); +#527598 = SURFACE_SIDE_STYLE('',(#527599)); +#527599 = SURFACE_STYLE_FILL_AREA(#527600); +#527600 = FILL_AREA_STYLE('',(#527601)); +#527601 = FILL_AREA_STYLE_COLOUR('',#517768); +#527602 = OVER_RIDING_STYLED_ITEM('overriding color',(#527603),#48895, + #527502); +#527603 = PRESENTATION_STYLE_ASSIGNMENT((#527604)); +#527604 = SURFACE_STYLE_USAGE(.BOTH.,#527605); +#527605 = SURFACE_SIDE_STYLE('',(#527606)); +#527606 = SURFACE_STYLE_FILL_AREA(#527607); +#527607 = FILL_AREA_STYLE('',(#527608)); +#527608 = FILL_AREA_STYLE_COLOUR('',#517768); +#527609 = OVER_RIDING_STYLED_ITEM('overriding color',(#527610),#48919, + #527502); +#527610 = PRESENTATION_STYLE_ASSIGNMENT((#527611)); +#527611 = SURFACE_STYLE_USAGE(.BOTH.,#527612); +#527612 = SURFACE_SIDE_STYLE('',(#527613)); +#527613 = SURFACE_STYLE_FILL_AREA(#527614); +#527614 = FILL_AREA_STYLE('',(#527615)); +#527615 = FILL_AREA_STYLE_COLOUR('',#517768); +#527616 = OVER_RIDING_STYLED_ITEM('overriding color',(#527617),#48946, + #527502); +#527617 = PRESENTATION_STYLE_ASSIGNMENT((#527618)); +#527618 = SURFACE_STYLE_USAGE(.BOTH.,#527619); +#527619 = SURFACE_SIDE_STYLE('',(#527620)); +#527620 = SURFACE_STYLE_FILL_AREA(#527621); +#527621 = FILL_AREA_STYLE('',(#527622)); +#527622 = FILL_AREA_STYLE_COLOUR('',#517768); +#527623 = OVER_RIDING_STYLED_ITEM('overriding color',(#527624),#48958, + #527502); +#527624 = PRESENTATION_STYLE_ASSIGNMENT((#527625)); +#527625 = SURFACE_STYLE_USAGE(.BOTH.,#527626); +#527626 = SURFACE_SIDE_STYLE('',(#527627)); +#527627 = SURFACE_STYLE_FILL_AREA(#527628); +#527628 = FILL_AREA_STYLE('',(#527629)); +#527629 = FILL_AREA_STYLE_COLOUR('',#517768); +#527630 = OVER_RIDING_STYLED_ITEM('overriding color',(#527631),#48975, + #527502); +#527631 = PRESENTATION_STYLE_ASSIGNMENT((#527632)); +#527632 = SURFACE_STYLE_USAGE(.BOTH.,#527633); +#527633 = SURFACE_SIDE_STYLE('',(#527634)); +#527634 = SURFACE_STYLE_FILL_AREA(#527635); +#527635 = FILL_AREA_STYLE('',(#527636)); +#527636 = FILL_AREA_STYLE_COLOUR('',#517768); +#527637 = STYLED_ITEM('color',(#527638),#48987); +#527638 = PRESENTATION_STYLE_ASSIGNMENT((#527639,#527644)); +#527639 = SURFACE_STYLE_USAGE(.BOTH.,#527640); +#527640 = SURFACE_SIDE_STYLE('',(#527641)); +#527641 = SURFACE_STYLE_FILL_AREA(#527642); +#527642 = FILL_AREA_STYLE('',(#527643)); +#527643 = FILL_AREA_STYLE_COLOUR('',#523837); +#527644 = CURVE_STYLE('',#527645,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527645 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527646 = OVER_RIDING_STYLED_ITEM('overriding color',(#527647),#48989, + #527637); +#527647 = PRESENTATION_STYLE_ASSIGNMENT((#527648)); +#527648 = SURFACE_STYLE_USAGE(.BOTH.,#527649); +#527649 = SURFACE_SIDE_STYLE('',(#527650)); +#527650 = SURFACE_STYLE_FILL_AREA(#527651); +#527651 = FILL_AREA_STYLE('',(#527652)); +#527652 = FILL_AREA_STYLE_COLOUR('',#517768); +#527653 = OVER_RIDING_STYLED_ITEM('overriding color',(#527654),#49029, + #527637); +#527654 = PRESENTATION_STYLE_ASSIGNMENT((#527655)); +#527655 = SURFACE_STYLE_USAGE(.BOTH.,#527656); +#527656 = SURFACE_SIDE_STYLE('',(#527657)); +#527657 = SURFACE_STYLE_FILL_AREA(#527658); +#527658 = FILL_AREA_STYLE('',(#527659)); +#527659 = FILL_AREA_STYLE_COLOUR('',#517768); +#527660 = OVER_RIDING_STYLED_ITEM('overriding color',(#527661),#49060, + #527637); +#527661 = PRESENTATION_STYLE_ASSIGNMENT((#527662)); +#527662 = SURFACE_STYLE_USAGE(.BOTH.,#527663); +#527663 = SURFACE_SIDE_STYLE('',(#527664)); +#527664 = SURFACE_STYLE_FILL_AREA(#527665); +#527665 = FILL_AREA_STYLE('',(#527666)); +#527666 = FILL_AREA_STYLE_COLOUR('',#517768); +#527667 = OVER_RIDING_STYLED_ITEM('overriding color',(#527668),#49091, + #527637); +#527668 = PRESENTATION_STYLE_ASSIGNMENT((#527669)); +#527669 = SURFACE_STYLE_USAGE(.BOTH.,#527670); +#527670 = SURFACE_SIDE_STYLE('',(#527671)); +#527671 = SURFACE_STYLE_FILL_AREA(#527672); +#527672 = FILL_AREA_STYLE('',(#527673)); +#527673 = FILL_AREA_STYLE_COLOUR('',#517768); +#527674 = OVER_RIDING_STYLED_ITEM('overriding color',(#527675),#49141, + #527637); +#527675 = PRESENTATION_STYLE_ASSIGNMENT((#527676)); +#527676 = SURFACE_STYLE_USAGE(.BOTH.,#527677); +#527677 = SURFACE_SIDE_STYLE('',(#527678)); +#527678 = SURFACE_STYLE_FILL_AREA(#527679); +#527679 = FILL_AREA_STYLE('',(#527680)); +#527680 = FILL_AREA_STYLE_COLOUR('',#517768); +#527681 = OVER_RIDING_STYLED_ITEM('overriding color',(#527682),#49172, + #527637); +#527682 = PRESENTATION_STYLE_ASSIGNMENT((#527683)); +#527683 = SURFACE_STYLE_USAGE(.BOTH.,#527684); +#527684 = SURFACE_SIDE_STYLE('',(#527685)); +#527685 = SURFACE_STYLE_FILL_AREA(#527686); +#527686 = FILL_AREA_STYLE('',(#527687)); +#527687 = FILL_AREA_STYLE_COLOUR('',#517768); +#527688 = OVER_RIDING_STYLED_ITEM('overriding color',(#527689),#49205, + #527637); +#527689 = PRESENTATION_STYLE_ASSIGNMENT((#527690)); +#527690 = SURFACE_STYLE_USAGE(.BOTH.,#527691); +#527691 = SURFACE_SIDE_STYLE('',(#527692)); +#527692 = SURFACE_STYLE_FILL_AREA(#527693); +#527693 = FILL_AREA_STYLE('',(#527694)); +#527694 = FILL_AREA_STYLE_COLOUR('',#517768); +#527695 = OVER_RIDING_STYLED_ITEM('overriding color',(#527696),#49222, + #527637); +#527696 = PRESENTATION_STYLE_ASSIGNMENT((#527697)); +#527697 = SURFACE_STYLE_USAGE(.BOTH.,#527698); +#527698 = SURFACE_SIDE_STYLE('',(#527699)); +#527699 = SURFACE_STYLE_FILL_AREA(#527700); +#527700 = FILL_AREA_STYLE('',(#527701)); +#527701 = FILL_AREA_STYLE_COLOUR('',#517768); +#527702 = OVER_RIDING_STYLED_ITEM('overriding color',(#527703),#49246, + #527637); +#527703 = PRESENTATION_STYLE_ASSIGNMENT((#527704)); +#527704 = SURFACE_STYLE_USAGE(.BOTH.,#527705); +#527705 = SURFACE_SIDE_STYLE('',(#527706)); +#527706 = SURFACE_STYLE_FILL_AREA(#527707); +#527707 = FILL_AREA_STYLE('',(#527708)); +#527708 = FILL_AREA_STYLE_COLOUR('',#517768); +#527709 = OVER_RIDING_STYLED_ITEM('overriding color',(#527710),#49277, + #527637); +#527710 = PRESENTATION_STYLE_ASSIGNMENT((#527711)); +#527711 = SURFACE_STYLE_USAGE(.BOTH.,#527712); +#527712 = SURFACE_SIDE_STYLE('',(#527713)); +#527713 = SURFACE_STYLE_FILL_AREA(#527714); +#527714 = FILL_AREA_STYLE('',(#527715)); +#527715 = FILL_AREA_STYLE_COLOUR('',#517768); +#527716 = OVER_RIDING_STYLED_ITEM('overriding color',(#527717),#49294, + #527637); +#527717 = PRESENTATION_STYLE_ASSIGNMENT((#527718)); +#527718 = SURFACE_STYLE_USAGE(.BOTH.,#527719); +#527719 = SURFACE_SIDE_STYLE('',(#527720)); +#527720 = SURFACE_STYLE_FILL_AREA(#527721); +#527721 = FILL_AREA_STYLE('',(#527722)); +#527722 = FILL_AREA_STYLE_COLOUR('',#517768); +#527723 = OVER_RIDING_STYLED_ITEM('overriding color',(#527724),#49323, + #527637); +#527724 = PRESENTATION_STYLE_ASSIGNMENT((#527725)); +#527725 = SURFACE_STYLE_USAGE(.BOTH.,#527726); +#527726 = SURFACE_SIDE_STYLE('',(#527727)); +#527727 = SURFACE_STYLE_FILL_AREA(#527728); +#527728 = FILL_AREA_STYLE('',(#527729)); +#527729 = FILL_AREA_STYLE_COLOUR('',#517768); +#527730 = OVER_RIDING_STYLED_ITEM('overriding color',(#527731),#49347, + #527637); +#527731 = PRESENTATION_STYLE_ASSIGNMENT((#527732)); +#527732 = SURFACE_STYLE_USAGE(.BOTH.,#527733); +#527733 = SURFACE_SIDE_STYLE('',(#527734)); +#527734 = SURFACE_STYLE_FILL_AREA(#527735); +#527735 = FILL_AREA_STYLE('',(#527736)); +#527736 = FILL_AREA_STYLE_COLOUR('',#517768); +#527737 = OVER_RIDING_STYLED_ITEM('overriding color',(#527738),#49373, + #527637); +#527738 = PRESENTATION_STYLE_ASSIGNMENT((#527739)); +#527739 = SURFACE_STYLE_USAGE(.BOTH.,#527740); +#527740 = SURFACE_SIDE_STYLE('',(#527741)); +#527741 = SURFACE_STYLE_FILL_AREA(#527742); +#527742 = FILL_AREA_STYLE('',(#527743)); +#527743 = FILL_AREA_STYLE_COLOUR('',#517768); +#527744 = OVER_RIDING_STYLED_ITEM('overriding color',(#527745),#49397, + #527637); +#527745 = PRESENTATION_STYLE_ASSIGNMENT((#527746)); +#527746 = SURFACE_STYLE_USAGE(.BOTH.,#527747); +#527747 = SURFACE_SIDE_STYLE('',(#527748)); +#527748 = SURFACE_STYLE_FILL_AREA(#527749); +#527749 = FILL_AREA_STYLE('',(#527750)); +#527750 = FILL_AREA_STYLE_COLOUR('',#517768); +#527751 = OVER_RIDING_STYLED_ITEM('overriding color',(#527752),#49424, + #527637); +#527752 = PRESENTATION_STYLE_ASSIGNMENT((#527753)); +#527753 = SURFACE_STYLE_USAGE(.BOTH.,#527754); +#527754 = SURFACE_SIDE_STYLE('',(#527755)); +#527755 = SURFACE_STYLE_FILL_AREA(#527756); +#527756 = FILL_AREA_STYLE('',(#527757)); +#527757 = FILL_AREA_STYLE_COLOUR('',#517768); +#527758 = OVER_RIDING_STYLED_ITEM('overriding color',(#527759),#49436, + #527637); +#527759 = PRESENTATION_STYLE_ASSIGNMENT((#527760)); +#527760 = SURFACE_STYLE_USAGE(.BOTH.,#527761); +#527761 = SURFACE_SIDE_STYLE('',(#527762)); +#527762 = SURFACE_STYLE_FILL_AREA(#527763); +#527763 = FILL_AREA_STYLE('',(#527764)); +#527764 = FILL_AREA_STYLE_COLOUR('',#517768); +#527765 = OVER_RIDING_STYLED_ITEM('overriding color',(#527766),#49453, + #527637); +#527766 = PRESENTATION_STYLE_ASSIGNMENT((#527767)); +#527767 = SURFACE_STYLE_USAGE(.BOTH.,#527768); +#527768 = SURFACE_SIDE_STYLE('',(#527769)); +#527769 = SURFACE_STYLE_FILL_AREA(#527770); +#527770 = FILL_AREA_STYLE('',(#527771)); +#527771 = FILL_AREA_STYLE_COLOUR('',#517768); +#527772 = STYLED_ITEM('color',(#527773),#49465); +#527773 = PRESENTATION_STYLE_ASSIGNMENT((#527774,#527779)); +#527774 = SURFACE_STYLE_USAGE(.BOTH.,#527775); +#527775 = SURFACE_SIDE_STYLE('',(#527776)); +#527776 = SURFACE_STYLE_FILL_AREA(#527777); +#527777 = FILL_AREA_STYLE('',(#527778)); +#527778 = FILL_AREA_STYLE_COLOUR('',#523837); +#527779 = CURVE_STYLE('',#527780,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527780 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527781 = OVER_RIDING_STYLED_ITEM('overriding color',(#527782),#49467, + #527772); +#527782 = PRESENTATION_STYLE_ASSIGNMENT((#527783)); +#527783 = SURFACE_STYLE_USAGE(.BOTH.,#527784); +#527784 = SURFACE_SIDE_STYLE('',(#527785)); +#527785 = SURFACE_STYLE_FILL_AREA(#527786); +#527786 = FILL_AREA_STYLE('',(#527787)); +#527787 = FILL_AREA_STYLE_COLOUR('',#517768); +#527788 = OVER_RIDING_STYLED_ITEM('overriding color',(#527789),#49507, + #527772); +#527789 = PRESENTATION_STYLE_ASSIGNMENT((#527790)); +#527790 = SURFACE_STYLE_USAGE(.BOTH.,#527791); +#527791 = SURFACE_SIDE_STYLE('',(#527792)); +#527792 = SURFACE_STYLE_FILL_AREA(#527793); +#527793 = FILL_AREA_STYLE('',(#527794)); +#527794 = FILL_AREA_STYLE_COLOUR('',#517768); +#527795 = OVER_RIDING_STYLED_ITEM('overriding color',(#527796),#49538, + #527772); +#527796 = PRESENTATION_STYLE_ASSIGNMENT((#527797)); +#527797 = SURFACE_STYLE_USAGE(.BOTH.,#527798); +#527798 = SURFACE_SIDE_STYLE('',(#527799)); +#527799 = SURFACE_STYLE_FILL_AREA(#527800); +#527800 = FILL_AREA_STYLE('',(#527801)); +#527801 = FILL_AREA_STYLE_COLOUR('',#517768); +#527802 = OVER_RIDING_STYLED_ITEM('overriding color',(#527803),#49569, + #527772); +#527803 = PRESENTATION_STYLE_ASSIGNMENT((#527804)); +#527804 = SURFACE_STYLE_USAGE(.BOTH.,#527805); +#527805 = SURFACE_SIDE_STYLE('',(#527806)); +#527806 = SURFACE_STYLE_FILL_AREA(#527807); +#527807 = FILL_AREA_STYLE('',(#527808)); +#527808 = FILL_AREA_STYLE_COLOUR('',#517768); +#527809 = OVER_RIDING_STYLED_ITEM('overriding color',(#527810),#49619, + #527772); +#527810 = PRESENTATION_STYLE_ASSIGNMENT((#527811)); +#527811 = SURFACE_STYLE_USAGE(.BOTH.,#527812); +#527812 = SURFACE_SIDE_STYLE('',(#527813)); +#527813 = SURFACE_STYLE_FILL_AREA(#527814); +#527814 = FILL_AREA_STYLE('',(#527815)); +#527815 = FILL_AREA_STYLE_COLOUR('',#517768); +#527816 = OVER_RIDING_STYLED_ITEM('overriding color',(#527817),#49650, + #527772); +#527817 = PRESENTATION_STYLE_ASSIGNMENT((#527818)); +#527818 = SURFACE_STYLE_USAGE(.BOTH.,#527819); +#527819 = SURFACE_SIDE_STYLE('',(#527820)); +#527820 = SURFACE_STYLE_FILL_AREA(#527821); +#527821 = FILL_AREA_STYLE('',(#527822)); +#527822 = FILL_AREA_STYLE_COLOUR('',#517768); +#527823 = OVER_RIDING_STYLED_ITEM('overriding color',(#527824),#49683, + #527772); +#527824 = PRESENTATION_STYLE_ASSIGNMENT((#527825)); +#527825 = SURFACE_STYLE_USAGE(.BOTH.,#527826); +#527826 = SURFACE_SIDE_STYLE('',(#527827)); +#527827 = SURFACE_STYLE_FILL_AREA(#527828); +#527828 = FILL_AREA_STYLE('',(#527829)); +#527829 = FILL_AREA_STYLE_COLOUR('',#517768); +#527830 = OVER_RIDING_STYLED_ITEM('overriding color',(#527831),#49700, + #527772); +#527831 = PRESENTATION_STYLE_ASSIGNMENT((#527832)); +#527832 = SURFACE_STYLE_USAGE(.BOTH.,#527833); +#527833 = SURFACE_SIDE_STYLE('',(#527834)); +#527834 = SURFACE_STYLE_FILL_AREA(#527835); +#527835 = FILL_AREA_STYLE('',(#527836)); +#527836 = FILL_AREA_STYLE_COLOUR('',#517768); +#527837 = OVER_RIDING_STYLED_ITEM('overriding color',(#527838),#49724, + #527772); +#527838 = PRESENTATION_STYLE_ASSIGNMENT((#527839)); +#527839 = SURFACE_STYLE_USAGE(.BOTH.,#527840); +#527840 = SURFACE_SIDE_STYLE('',(#527841)); +#527841 = SURFACE_STYLE_FILL_AREA(#527842); +#527842 = FILL_AREA_STYLE('',(#527843)); +#527843 = FILL_AREA_STYLE_COLOUR('',#517768); +#527844 = OVER_RIDING_STYLED_ITEM('overriding color',(#527845),#49755, + #527772); +#527845 = PRESENTATION_STYLE_ASSIGNMENT((#527846)); +#527846 = SURFACE_STYLE_USAGE(.BOTH.,#527847); +#527847 = SURFACE_SIDE_STYLE('',(#527848)); +#527848 = SURFACE_STYLE_FILL_AREA(#527849); +#527849 = FILL_AREA_STYLE('',(#527850)); +#527850 = FILL_AREA_STYLE_COLOUR('',#517768); +#527851 = OVER_RIDING_STYLED_ITEM('overriding color',(#527852),#49772, + #527772); +#527852 = PRESENTATION_STYLE_ASSIGNMENT((#527853)); +#527853 = SURFACE_STYLE_USAGE(.BOTH.,#527854); +#527854 = SURFACE_SIDE_STYLE('',(#527855)); +#527855 = SURFACE_STYLE_FILL_AREA(#527856); +#527856 = FILL_AREA_STYLE('',(#527857)); +#527857 = FILL_AREA_STYLE_COLOUR('',#517768); +#527858 = OVER_RIDING_STYLED_ITEM('overriding color',(#527859),#49801, + #527772); +#527859 = PRESENTATION_STYLE_ASSIGNMENT((#527860)); +#527860 = SURFACE_STYLE_USAGE(.BOTH.,#527861); +#527861 = SURFACE_SIDE_STYLE('',(#527862)); +#527862 = SURFACE_STYLE_FILL_AREA(#527863); +#527863 = FILL_AREA_STYLE('',(#527864)); +#527864 = FILL_AREA_STYLE_COLOUR('',#517768); +#527865 = OVER_RIDING_STYLED_ITEM('overriding color',(#527866),#49825, + #527772); +#527866 = PRESENTATION_STYLE_ASSIGNMENT((#527867)); +#527867 = SURFACE_STYLE_USAGE(.BOTH.,#527868); +#527868 = SURFACE_SIDE_STYLE('',(#527869)); +#527869 = SURFACE_STYLE_FILL_AREA(#527870); +#527870 = FILL_AREA_STYLE('',(#527871)); +#527871 = FILL_AREA_STYLE_COLOUR('',#517768); +#527872 = OVER_RIDING_STYLED_ITEM('overriding color',(#527873),#49851, + #527772); +#527873 = PRESENTATION_STYLE_ASSIGNMENT((#527874)); +#527874 = SURFACE_STYLE_USAGE(.BOTH.,#527875); +#527875 = SURFACE_SIDE_STYLE('',(#527876)); +#527876 = SURFACE_STYLE_FILL_AREA(#527877); +#527877 = FILL_AREA_STYLE('',(#527878)); +#527878 = FILL_AREA_STYLE_COLOUR('',#517768); +#527879 = OVER_RIDING_STYLED_ITEM('overriding color',(#527880),#49875, + #527772); +#527880 = PRESENTATION_STYLE_ASSIGNMENT((#527881)); +#527881 = SURFACE_STYLE_USAGE(.BOTH.,#527882); +#527882 = SURFACE_SIDE_STYLE('',(#527883)); +#527883 = SURFACE_STYLE_FILL_AREA(#527884); +#527884 = FILL_AREA_STYLE('',(#527885)); +#527885 = FILL_AREA_STYLE_COLOUR('',#517768); +#527886 = OVER_RIDING_STYLED_ITEM('overriding color',(#527887),#49902, + #527772); +#527887 = PRESENTATION_STYLE_ASSIGNMENT((#527888)); +#527888 = SURFACE_STYLE_USAGE(.BOTH.,#527889); +#527889 = SURFACE_SIDE_STYLE('',(#527890)); +#527890 = SURFACE_STYLE_FILL_AREA(#527891); +#527891 = FILL_AREA_STYLE('',(#527892)); +#527892 = FILL_AREA_STYLE_COLOUR('',#517768); +#527893 = OVER_RIDING_STYLED_ITEM('overriding color',(#527894),#49914, + #527772); +#527894 = PRESENTATION_STYLE_ASSIGNMENT((#527895)); +#527895 = SURFACE_STYLE_USAGE(.BOTH.,#527896); +#527896 = SURFACE_SIDE_STYLE('',(#527897)); +#527897 = SURFACE_STYLE_FILL_AREA(#527898); +#527898 = FILL_AREA_STYLE('',(#527899)); +#527899 = FILL_AREA_STYLE_COLOUR('',#517768); +#527900 = OVER_RIDING_STYLED_ITEM('overriding color',(#527901),#49931, + #527772); +#527901 = PRESENTATION_STYLE_ASSIGNMENT((#527902)); +#527902 = SURFACE_STYLE_USAGE(.BOTH.,#527903); +#527903 = SURFACE_SIDE_STYLE('',(#527904)); +#527904 = SURFACE_STYLE_FILL_AREA(#527905); +#527905 = FILL_AREA_STYLE('',(#527906)); +#527906 = FILL_AREA_STYLE_COLOUR('',#517768); +#527907 = STYLED_ITEM('color',(#527908),#49943); +#527908 = PRESENTATION_STYLE_ASSIGNMENT((#527909,#527914)); +#527909 = SURFACE_STYLE_USAGE(.BOTH.,#527910); +#527910 = SURFACE_SIDE_STYLE('',(#527911)); +#527911 = SURFACE_STYLE_FILL_AREA(#527912); +#527912 = FILL_AREA_STYLE('',(#527913)); +#527913 = FILL_AREA_STYLE_COLOUR('',#523837); +#527914 = CURVE_STYLE('',#527915,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#527915 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#527916 = OVER_RIDING_STYLED_ITEM('overriding color',(#527917),#49945, + #527907); +#527917 = PRESENTATION_STYLE_ASSIGNMENT((#527918)); +#527918 = SURFACE_STYLE_USAGE(.BOTH.,#527919); +#527919 = SURFACE_SIDE_STYLE('',(#527920)); +#527920 = SURFACE_STYLE_FILL_AREA(#527921); +#527921 = FILL_AREA_STYLE('',(#527922)); +#527922 = FILL_AREA_STYLE_COLOUR('',#517768); +#527923 = OVER_RIDING_STYLED_ITEM('overriding color',(#527924),#49985, + #527907); +#527924 = PRESENTATION_STYLE_ASSIGNMENT((#527925)); +#527925 = SURFACE_STYLE_USAGE(.BOTH.,#527926); +#527926 = SURFACE_SIDE_STYLE('',(#527927)); +#527927 = SURFACE_STYLE_FILL_AREA(#527928); +#527928 = FILL_AREA_STYLE('',(#527929)); +#527929 = FILL_AREA_STYLE_COLOUR('',#517768); +#527930 = OVER_RIDING_STYLED_ITEM('overriding color',(#527931),#50016, + #527907); +#527931 = PRESENTATION_STYLE_ASSIGNMENT((#527932)); +#527932 = SURFACE_STYLE_USAGE(.BOTH.,#527933); +#527933 = SURFACE_SIDE_STYLE('',(#527934)); +#527934 = SURFACE_STYLE_FILL_AREA(#527935); +#527935 = FILL_AREA_STYLE('',(#527936)); +#527936 = FILL_AREA_STYLE_COLOUR('',#517768); +#527937 = OVER_RIDING_STYLED_ITEM('overriding color',(#527938),#50047, + #527907); +#527938 = PRESENTATION_STYLE_ASSIGNMENT((#527939)); +#527939 = SURFACE_STYLE_USAGE(.BOTH.,#527940); +#527940 = SURFACE_SIDE_STYLE('',(#527941)); +#527941 = SURFACE_STYLE_FILL_AREA(#527942); +#527942 = FILL_AREA_STYLE('',(#527943)); +#527943 = FILL_AREA_STYLE_COLOUR('',#517768); +#527944 = OVER_RIDING_STYLED_ITEM('overriding color',(#527945),#50097, + #527907); +#527945 = PRESENTATION_STYLE_ASSIGNMENT((#527946)); +#527946 = SURFACE_STYLE_USAGE(.BOTH.,#527947); +#527947 = SURFACE_SIDE_STYLE('',(#527948)); +#527948 = SURFACE_STYLE_FILL_AREA(#527949); +#527949 = FILL_AREA_STYLE('',(#527950)); +#527950 = FILL_AREA_STYLE_COLOUR('',#517768); +#527951 = OVER_RIDING_STYLED_ITEM('overriding color',(#527952),#50128, + #527907); +#527952 = PRESENTATION_STYLE_ASSIGNMENT((#527953)); +#527953 = SURFACE_STYLE_USAGE(.BOTH.,#527954); +#527954 = SURFACE_SIDE_STYLE('',(#527955)); +#527955 = SURFACE_STYLE_FILL_AREA(#527956); +#527956 = FILL_AREA_STYLE('',(#527957)); +#527957 = FILL_AREA_STYLE_COLOUR('',#517768); +#527958 = OVER_RIDING_STYLED_ITEM('overriding color',(#527959),#50161, + #527907); +#527959 = PRESENTATION_STYLE_ASSIGNMENT((#527960)); +#527960 = SURFACE_STYLE_USAGE(.BOTH.,#527961); +#527961 = SURFACE_SIDE_STYLE('',(#527962)); +#527962 = SURFACE_STYLE_FILL_AREA(#527963); +#527963 = FILL_AREA_STYLE('',(#527964)); +#527964 = FILL_AREA_STYLE_COLOUR('',#517768); +#527965 = OVER_RIDING_STYLED_ITEM('overriding color',(#527966),#50178, + #527907); +#527966 = PRESENTATION_STYLE_ASSIGNMENT((#527967)); +#527967 = SURFACE_STYLE_USAGE(.BOTH.,#527968); +#527968 = SURFACE_SIDE_STYLE('',(#527969)); +#527969 = SURFACE_STYLE_FILL_AREA(#527970); +#527970 = FILL_AREA_STYLE('',(#527971)); +#527971 = FILL_AREA_STYLE_COLOUR('',#517768); +#527972 = OVER_RIDING_STYLED_ITEM('overriding color',(#527973),#50202, + #527907); +#527973 = PRESENTATION_STYLE_ASSIGNMENT((#527974)); +#527974 = SURFACE_STYLE_USAGE(.BOTH.,#527975); +#527975 = SURFACE_SIDE_STYLE('',(#527976)); +#527976 = SURFACE_STYLE_FILL_AREA(#527977); +#527977 = FILL_AREA_STYLE('',(#527978)); +#527978 = FILL_AREA_STYLE_COLOUR('',#517768); +#527979 = OVER_RIDING_STYLED_ITEM('overriding color',(#527980),#50233, + #527907); +#527980 = PRESENTATION_STYLE_ASSIGNMENT((#527981)); +#527981 = SURFACE_STYLE_USAGE(.BOTH.,#527982); +#527982 = SURFACE_SIDE_STYLE('',(#527983)); +#527983 = SURFACE_STYLE_FILL_AREA(#527984); +#527984 = FILL_AREA_STYLE('',(#527985)); +#527985 = FILL_AREA_STYLE_COLOUR('',#517768); +#527986 = OVER_RIDING_STYLED_ITEM('overriding color',(#527987),#50250, + #527907); +#527987 = PRESENTATION_STYLE_ASSIGNMENT((#527988)); +#527988 = SURFACE_STYLE_USAGE(.BOTH.,#527989); +#527989 = SURFACE_SIDE_STYLE('',(#527990)); +#527990 = SURFACE_STYLE_FILL_AREA(#527991); +#527991 = FILL_AREA_STYLE('',(#527992)); +#527992 = FILL_AREA_STYLE_COLOUR('',#517768); +#527993 = OVER_RIDING_STYLED_ITEM('overriding color',(#527994),#50279, + #527907); +#527994 = PRESENTATION_STYLE_ASSIGNMENT((#527995)); +#527995 = SURFACE_STYLE_USAGE(.BOTH.,#527996); +#527996 = SURFACE_SIDE_STYLE('',(#527997)); +#527997 = SURFACE_STYLE_FILL_AREA(#527998); +#527998 = FILL_AREA_STYLE('',(#527999)); +#527999 = FILL_AREA_STYLE_COLOUR('',#517768); +#528000 = OVER_RIDING_STYLED_ITEM('overriding color',(#528001),#50303, + #527907); +#528001 = PRESENTATION_STYLE_ASSIGNMENT((#528002)); +#528002 = SURFACE_STYLE_USAGE(.BOTH.,#528003); +#528003 = SURFACE_SIDE_STYLE('',(#528004)); +#528004 = SURFACE_STYLE_FILL_AREA(#528005); +#528005 = FILL_AREA_STYLE('',(#528006)); +#528006 = FILL_AREA_STYLE_COLOUR('',#517768); +#528007 = OVER_RIDING_STYLED_ITEM('overriding color',(#528008),#50329, + #527907); +#528008 = PRESENTATION_STYLE_ASSIGNMENT((#528009)); +#528009 = SURFACE_STYLE_USAGE(.BOTH.,#528010); +#528010 = SURFACE_SIDE_STYLE('',(#528011)); +#528011 = SURFACE_STYLE_FILL_AREA(#528012); +#528012 = FILL_AREA_STYLE('',(#528013)); +#528013 = FILL_AREA_STYLE_COLOUR('',#517768); +#528014 = OVER_RIDING_STYLED_ITEM('overriding color',(#528015),#50353, + #527907); +#528015 = PRESENTATION_STYLE_ASSIGNMENT((#528016)); +#528016 = SURFACE_STYLE_USAGE(.BOTH.,#528017); +#528017 = SURFACE_SIDE_STYLE('',(#528018)); +#528018 = SURFACE_STYLE_FILL_AREA(#528019); +#528019 = FILL_AREA_STYLE('',(#528020)); +#528020 = FILL_AREA_STYLE_COLOUR('',#517768); +#528021 = OVER_RIDING_STYLED_ITEM('overriding color',(#528022),#50380, + #527907); +#528022 = PRESENTATION_STYLE_ASSIGNMENT((#528023)); +#528023 = SURFACE_STYLE_USAGE(.BOTH.,#528024); +#528024 = SURFACE_SIDE_STYLE('',(#528025)); +#528025 = SURFACE_STYLE_FILL_AREA(#528026); +#528026 = FILL_AREA_STYLE('',(#528027)); +#528027 = FILL_AREA_STYLE_COLOUR('',#517768); +#528028 = OVER_RIDING_STYLED_ITEM('overriding color',(#528029),#50392, + #527907); +#528029 = PRESENTATION_STYLE_ASSIGNMENT((#528030)); +#528030 = SURFACE_STYLE_USAGE(.BOTH.,#528031); +#528031 = SURFACE_SIDE_STYLE('',(#528032)); +#528032 = SURFACE_STYLE_FILL_AREA(#528033); +#528033 = FILL_AREA_STYLE('',(#528034)); +#528034 = FILL_AREA_STYLE_COLOUR('',#517768); +#528035 = OVER_RIDING_STYLED_ITEM('overriding color',(#528036),#50409, + #527907); +#528036 = PRESENTATION_STYLE_ASSIGNMENT((#528037)); +#528037 = SURFACE_STYLE_USAGE(.BOTH.,#528038); +#528038 = SURFACE_SIDE_STYLE('',(#528039)); +#528039 = SURFACE_STYLE_FILL_AREA(#528040); +#528040 = FILL_AREA_STYLE('',(#528041)); +#528041 = FILL_AREA_STYLE_COLOUR('',#517768); +#528042 = STYLED_ITEM('color',(#528043),#50421); +#528043 = PRESENTATION_STYLE_ASSIGNMENT((#528044,#528049)); +#528044 = SURFACE_STYLE_USAGE(.BOTH.,#528045); +#528045 = SURFACE_SIDE_STYLE('',(#528046)); +#528046 = SURFACE_STYLE_FILL_AREA(#528047); +#528047 = FILL_AREA_STYLE('',(#528048)); +#528048 = FILL_AREA_STYLE_COLOUR('',#523837); +#528049 = CURVE_STYLE('',#528050,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528050 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528051 = OVER_RIDING_STYLED_ITEM('overriding color',(#528052),#50423, + #528042); +#528052 = PRESENTATION_STYLE_ASSIGNMENT((#528053)); +#528053 = SURFACE_STYLE_USAGE(.BOTH.,#528054); +#528054 = SURFACE_SIDE_STYLE('',(#528055)); +#528055 = SURFACE_STYLE_FILL_AREA(#528056); +#528056 = FILL_AREA_STYLE('',(#528057)); +#528057 = FILL_AREA_STYLE_COLOUR('',#517768); +#528058 = OVER_RIDING_STYLED_ITEM('overriding color',(#528059),#50463, + #528042); +#528059 = PRESENTATION_STYLE_ASSIGNMENT((#528060)); +#528060 = SURFACE_STYLE_USAGE(.BOTH.,#528061); +#528061 = SURFACE_SIDE_STYLE('',(#528062)); +#528062 = SURFACE_STYLE_FILL_AREA(#528063); +#528063 = FILL_AREA_STYLE('',(#528064)); +#528064 = FILL_AREA_STYLE_COLOUR('',#517768); +#528065 = OVER_RIDING_STYLED_ITEM('overriding color',(#528066),#50494, + #528042); +#528066 = PRESENTATION_STYLE_ASSIGNMENT((#528067)); +#528067 = SURFACE_STYLE_USAGE(.BOTH.,#528068); +#528068 = SURFACE_SIDE_STYLE('',(#528069)); +#528069 = SURFACE_STYLE_FILL_AREA(#528070); +#528070 = FILL_AREA_STYLE('',(#528071)); +#528071 = FILL_AREA_STYLE_COLOUR('',#517768); +#528072 = OVER_RIDING_STYLED_ITEM('overriding color',(#528073),#50525, + #528042); +#528073 = PRESENTATION_STYLE_ASSIGNMENT((#528074)); +#528074 = SURFACE_STYLE_USAGE(.BOTH.,#528075); +#528075 = SURFACE_SIDE_STYLE('',(#528076)); +#528076 = SURFACE_STYLE_FILL_AREA(#528077); +#528077 = FILL_AREA_STYLE('',(#528078)); +#528078 = FILL_AREA_STYLE_COLOUR('',#517768); +#528079 = OVER_RIDING_STYLED_ITEM('overriding color',(#528080),#50575, + #528042); +#528080 = PRESENTATION_STYLE_ASSIGNMENT((#528081)); +#528081 = SURFACE_STYLE_USAGE(.BOTH.,#528082); +#528082 = SURFACE_SIDE_STYLE('',(#528083)); +#528083 = SURFACE_STYLE_FILL_AREA(#528084); +#528084 = FILL_AREA_STYLE('',(#528085)); +#528085 = FILL_AREA_STYLE_COLOUR('',#517768); +#528086 = OVER_RIDING_STYLED_ITEM('overriding color',(#528087),#50606, + #528042); +#528087 = PRESENTATION_STYLE_ASSIGNMENT((#528088)); +#528088 = SURFACE_STYLE_USAGE(.BOTH.,#528089); +#528089 = SURFACE_SIDE_STYLE('',(#528090)); +#528090 = SURFACE_STYLE_FILL_AREA(#528091); +#528091 = FILL_AREA_STYLE('',(#528092)); +#528092 = FILL_AREA_STYLE_COLOUR('',#517768); +#528093 = OVER_RIDING_STYLED_ITEM('overriding color',(#528094),#50639, + #528042); +#528094 = PRESENTATION_STYLE_ASSIGNMENT((#528095)); +#528095 = SURFACE_STYLE_USAGE(.BOTH.,#528096); +#528096 = SURFACE_SIDE_STYLE('',(#528097)); +#528097 = SURFACE_STYLE_FILL_AREA(#528098); +#528098 = FILL_AREA_STYLE('',(#528099)); +#528099 = FILL_AREA_STYLE_COLOUR('',#517768); +#528100 = OVER_RIDING_STYLED_ITEM('overriding color',(#528101),#50656, + #528042); +#528101 = PRESENTATION_STYLE_ASSIGNMENT((#528102)); +#528102 = SURFACE_STYLE_USAGE(.BOTH.,#528103); +#528103 = SURFACE_SIDE_STYLE('',(#528104)); +#528104 = SURFACE_STYLE_FILL_AREA(#528105); +#528105 = FILL_AREA_STYLE('',(#528106)); +#528106 = FILL_AREA_STYLE_COLOUR('',#517768); +#528107 = OVER_RIDING_STYLED_ITEM('overriding color',(#528108),#50680, + #528042); +#528108 = PRESENTATION_STYLE_ASSIGNMENT((#528109)); +#528109 = SURFACE_STYLE_USAGE(.BOTH.,#528110); +#528110 = SURFACE_SIDE_STYLE('',(#528111)); +#528111 = SURFACE_STYLE_FILL_AREA(#528112); +#528112 = FILL_AREA_STYLE('',(#528113)); +#528113 = FILL_AREA_STYLE_COLOUR('',#517768); +#528114 = OVER_RIDING_STYLED_ITEM('overriding color',(#528115),#50711, + #528042); +#528115 = PRESENTATION_STYLE_ASSIGNMENT((#528116)); +#528116 = SURFACE_STYLE_USAGE(.BOTH.,#528117); +#528117 = SURFACE_SIDE_STYLE('',(#528118)); +#528118 = SURFACE_STYLE_FILL_AREA(#528119); +#528119 = FILL_AREA_STYLE('',(#528120)); +#528120 = FILL_AREA_STYLE_COLOUR('',#517768); +#528121 = OVER_RIDING_STYLED_ITEM('overriding color',(#528122),#50728, + #528042); +#528122 = PRESENTATION_STYLE_ASSIGNMENT((#528123)); +#528123 = SURFACE_STYLE_USAGE(.BOTH.,#528124); +#528124 = SURFACE_SIDE_STYLE('',(#528125)); +#528125 = SURFACE_STYLE_FILL_AREA(#528126); +#528126 = FILL_AREA_STYLE('',(#528127)); +#528127 = FILL_AREA_STYLE_COLOUR('',#517768); +#528128 = OVER_RIDING_STYLED_ITEM('overriding color',(#528129),#50757, + #528042); +#528129 = PRESENTATION_STYLE_ASSIGNMENT((#528130)); +#528130 = SURFACE_STYLE_USAGE(.BOTH.,#528131); +#528131 = SURFACE_SIDE_STYLE('',(#528132)); +#528132 = SURFACE_STYLE_FILL_AREA(#528133); +#528133 = FILL_AREA_STYLE('',(#528134)); +#528134 = FILL_AREA_STYLE_COLOUR('',#517768); +#528135 = OVER_RIDING_STYLED_ITEM('overriding color',(#528136),#50781, + #528042); +#528136 = PRESENTATION_STYLE_ASSIGNMENT((#528137)); +#528137 = SURFACE_STYLE_USAGE(.BOTH.,#528138); +#528138 = SURFACE_SIDE_STYLE('',(#528139)); +#528139 = SURFACE_STYLE_FILL_AREA(#528140); +#528140 = FILL_AREA_STYLE('',(#528141)); +#528141 = FILL_AREA_STYLE_COLOUR('',#517768); +#528142 = OVER_RIDING_STYLED_ITEM('overriding color',(#528143),#50807, + #528042); +#528143 = PRESENTATION_STYLE_ASSIGNMENT((#528144)); +#528144 = SURFACE_STYLE_USAGE(.BOTH.,#528145); +#528145 = SURFACE_SIDE_STYLE('',(#528146)); +#528146 = SURFACE_STYLE_FILL_AREA(#528147); +#528147 = FILL_AREA_STYLE('',(#528148)); +#528148 = FILL_AREA_STYLE_COLOUR('',#517768); +#528149 = OVER_RIDING_STYLED_ITEM('overriding color',(#528150),#50831, + #528042); +#528150 = PRESENTATION_STYLE_ASSIGNMENT((#528151)); +#528151 = SURFACE_STYLE_USAGE(.BOTH.,#528152); +#528152 = SURFACE_SIDE_STYLE('',(#528153)); +#528153 = SURFACE_STYLE_FILL_AREA(#528154); +#528154 = FILL_AREA_STYLE('',(#528155)); +#528155 = FILL_AREA_STYLE_COLOUR('',#517768); +#528156 = OVER_RIDING_STYLED_ITEM('overriding color',(#528157),#50858, + #528042); +#528157 = PRESENTATION_STYLE_ASSIGNMENT((#528158)); +#528158 = SURFACE_STYLE_USAGE(.BOTH.,#528159); +#528159 = SURFACE_SIDE_STYLE('',(#528160)); +#528160 = SURFACE_STYLE_FILL_AREA(#528161); +#528161 = FILL_AREA_STYLE('',(#528162)); +#528162 = FILL_AREA_STYLE_COLOUR('',#517768); +#528163 = OVER_RIDING_STYLED_ITEM('overriding color',(#528164),#50870, + #528042); +#528164 = PRESENTATION_STYLE_ASSIGNMENT((#528165)); +#528165 = SURFACE_STYLE_USAGE(.BOTH.,#528166); +#528166 = SURFACE_SIDE_STYLE('',(#528167)); +#528167 = SURFACE_STYLE_FILL_AREA(#528168); +#528168 = FILL_AREA_STYLE('',(#528169)); +#528169 = FILL_AREA_STYLE_COLOUR('',#517768); +#528170 = OVER_RIDING_STYLED_ITEM('overriding color',(#528171),#50887, + #528042); +#528171 = PRESENTATION_STYLE_ASSIGNMENT((#528172)); +#528172 = SURFACE_STYLE_USAGE(.BOTH.,#528173); +#528173 = SURFACE_SIDE_STYLE('',(#528174)); +#528174 = SURFACE_STYLE_FILL_AREA(#528175); +#528175 = FILL_AREA_STYLE('',(#528176)); +#528176 = FILL_AREA_STYLE_COLOUR('',#517768); +#528177 = STYLED_ITEM('color',(#528178),#50899); +#528178 = PRESENTATION_STYLE_ASSIGNMENT((#528179,#528184)); +#528179 = SURFACE_STYLE_USAGE(.BOTH.,#528180); +#528180 = SURFACE_SIDE_STYLE('',(#528181)); +#528181 = SURFACE_STYLE_FILL_AREA(#528182); +#528182 = FILL_AREA_STYLE('',(#528183)); +#528183 = FILL_AREA_STYLE_COLOUR('',#523837); +#528184 = CURVE_STYLE('',#528185,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528185 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528186 = OVER_RIDING_STYLED_ITEM('overriding color',(#528187),#50901, + #528177); +#528187 = PRESENTATION_STYLE_ASSIGNMENT((#528188)); +#528188 = SURFACE_STYLE_USAGE(.BOTH.,#528189); +#528189 = SURFACE_SIDE_STYLE('',(#528190)); +#528190 = SURFACE_STYLE_FILL_AREA(#528191); +#528191 = FILL_AREA_STYLE('',(#528192)); +#528192 = FILL_AREA_STYLE_COLOUR('',#517768); +#528193 = OVER_RIDING_STYLED_ITEM('overriding color',(#528194),#50941, + #528177); +#528194 = PRESENTATION_STYLE_ASSIGNMENT((#528195)); +#528195 = SURFACE_STYLE_USAGE(.BOTH.,#528196); +#528196 = SURFACE_SIDE_STYLE('',(#528197)); +#528197 = SURFACE_STYLE_FILL_AREA(#528198); +#528198 = FILL_AREA_STYLE('',(#528199)); +#528199 = FILL_AREA_STYLE_COLOUR('',#517768); +#528200 = OVER_RIDING_STYLED_ITEM('overriding color',(#528201),#50972, + #528177); +#528201 = PRESENTATION_STYLE_ASSIGNMENT((#528202)); +#528202 = SURFACE_STYLE_USAGE(.BOTH.,#528203); +#528203 = SURFACE_SIDE_STYLE('',(#528204)); +#528204 = SURFACE_STYLE_FILL_AREA(#528205); +#528205 = FILL_AREA_STYLE('',(#528206)); +#528206 = FILL_AREA_STYLE_COLOUR('',#517768); +#528207 = OVER_RIDING_STYLED_ITEM('overriding color',(#528208),#51003, + #528177); +#528208 = PRESENTATION_STYLE_ASSIGNMENT((#528209)); +#528209 = SURFACE_STYLE_USAGE(.BOTH.,#528210); +#528210 = SURFACE_SIDE_STYLE('',(#528211)); +#528211 = SURFACE_STYLE_FILL_AREA(#528212); +#528212 = FILL_AREA_STYLE('',(#528213)); +#528213 = FILL_AREA_STYLE_COLOUR('',#517768); +#528214 = OVER_RIDING_STYLED_ITEM('overriding color',(#528215),#51053, + #528177); +#528215 = PRESENTATION_STYLE_ASSIGNMENT((#528216)); +#528216 = SURFACE_STYLE_USAGE(.BOTH.,#528217); +#528217 = SURFACE_SIDE_STYLE('',(#528218)); +#528218 = SURFACE_STYLE_FILL_AREA(#528219); +#528219 = FILL_AREA_STYLE('',(#528220)); +#528220 = FILL_AREA_STYLE_COLOUR('',#517768); +#528221 = OVER_RIDING_STYLED_ITEM('overriding color',(#528222),#51084, + #528177); +#528222 = PRESENTATION_STYLE_ASSIGNMENT((#528223)); +#528223 = SURFACE_STYLE_USAGE(.BOTH.,#528224); +#528224 = SURFACE_SIDE_STYLE('',(#528225)); +#528225 = SURFACE_STYLE_FILL_AREA(#528226); +#528226 = FILL_AREA_STYLE('',(#528227)); +#528227 = FILL_AREA_STYLE_COLOUR('',#517768); +#528228 = OVER_RIDING_STYLED_ITEM('overriding color',(#528229),#51117, + #528177); +#528229 = PRESENTATION_STYLE_ASSIGNMENT((#528230)); +#528230 = SURFACE_STYLE_USAGE(.BOTH.,#528231); +#528231 = SURFACE_SIDE_STYLE('',(#528232)); +#528232 = SURFACE_STYLE_FILL_AREA(#528233); +#528233 = FILL_AREA_STYLE('',(#528234)); +#528234 = FILL_AREA_STYLE_COLOUR('',#517768); +#528235 = OVER_RIDING_STYLED_ITEM('overriding color',(#528236),#51134, + #528177); +#528236 = PRESENTATION_STYLE_ASSIGNMENT((#528237)); +#528237 = SURFACE_STYLE_USAGE(.BOTH.,#528238); +#528238 = SURFACE_SIDE_STYLE('',(#528239)); +#528239 = SURFACE_STYLE_FILL_AREA(#528240); +#528240 = FILL_AREA_STYLE('',(#528241)); +#528241 = FILL_AREA_STYLE_COLOUR('',#517768); +#528242 = OVER_RIDING_STYLED_ITEM('overriding color',(#528243),#51158, + #528177); +#528243 = PRESENTATION_STYLE_ASSIGNMENT((#528244)); +#528244 = SURFACE_STYLE_USAGE(.BOTH.,#528245); +#528245 = SURFACE_SIDE_STYLE('',(#528246)); +#528246 = SURFACE_STYLE_FILL_AREA(#528247); +#528247 = FILL_AREA_STYLE('',(#528248)); +#528248 = FILL_AREA_STYLE_COLOUR('',#517768); +#528249 = OVER_RIDING_STYLED_ITEM('overriding color',(#528250),#51189, + #528177); +#528250 = PRESENTATION_STYLE_ASSIGNMENT((#528251)); +#528251 = SURFACE_STYLE_USAGE(.BOTH.,#528252); +#528252 = SURFACE_SIDE_STYLE('',(#528253)); +#528253 = SURFACE_STYLE_FILL_AREA(#528254); +#528254 = FILL_AREA_STYLE('',(#528255)); +#528255 = FILL_AREA_STYLE_COLOUR('',#517768); +#528256 = OVER_RIDING_STYLED_ITEM('overriding color',(#528257),#51206, + #528177); +#528257 = PRESENTATION_STYLE_ASSIGNMENT((#528258)); +#528258 = SURFACE_STYLE_USAGE(.BOTH.,#528259); +#528259 = SURFACE_SIDE_STYLE('',(#528260)); +#528260 = SURFACE_STYLE_FILL_AREA(#528261); +#528261 = FILL_AREA_STYLE('',(#528262)); +#528262 = FILL_AREA_STYLE_COLOUR('',#517768); +#528263 = OVER_RIDING_STYLED_ITEM('overriding color',(#528264),#51235, + #528177); +#528264 = PRESENTATION_STYLE_ASSIGNMENT((#528265)); +#528265 = SURFACE_STYLE_USAGE(.BOTH.,#528266); +#528266 = SURFACE_SIDE_STYLE('',(#528267)); +#528267 = SURFACE_STYLE_FILL_AREA(#528268); +#528268 = FILL_AREA_STYLE('',(#528269)); +#528269 = FILL_AREA_STYLE_COLOUR('',#517768); +#528270 = OVER_RIDING_STYLED_ITEM('overriding color',(#528271),#51259, + #528177); +#528271 = PRESENTATION_STYLE_ASSIGNMENT((#528272)); +#528272 = SURFACE_STYLE_USAGE(.BOTH.,#528273); +#528273 = SURFACE_SIDE_STYLE('',(#528274)); +#528274 = SURFACE_STYLE_FILL_AREA(#528275); +#528275 = FILL_AREA_STYLE('',(#528276)); +#528276 = FILL_AREA_STYLE_COLOUR('',#517768); +#528277 = OVER_RIDING_STYLED_ITEM('overriding color',(#528278),#51285, + #528177); +#528278 = PRESENTATION_STYLE_ASSIGNMENT((#528279)); +#528279 = SURFACE_STYLE_USAGE(.BOTH.,#528280); +#528280 = SURFACE_SIDE_STYLE('',(#528281)); +#528281 = SURFACE_STYLE_FILL_AREA(#528282); +#528282 = FILL_AREA_STYLE('',(#528283)); +#528283 = FILL_AREA_STYLE_COLOUR('',#517768); +#528284 = OVER_RIDING_STYLED_ITEM('overriding color',(#528285),#51309, + #528177); +#528285 = PRESENTATION_STYLE_ASSIGNMENT((#528286)); +#528286 = SURFACE_STYLE_USAGE(.BOTH.,#528287); +#528287 = SURFACE_SIDE_STYLE('',(#528288)); +#528288 = SURFACE_STYLE_FILL_AREA(#528289); +#528289 = FILL_AREA_STYLE('',(#528290)); +#528290 = FILL_AREA_STYLE_COLOUR('',#517768); +#528291 = OVER_RIDING_STYLED_ITEM('overriding color',(#528292),#51336, + #528177); +#528292 = PRESENTATION_STYLE_ASSIGNMENT((#528293)); +#528293 = SURFACE_STYLE_USAGE(.BOTH.,#528294); +#528294 = SURFACE_SIDE_STYLE('',(#528295)); +#528295 = SURFACE_STYLE_FILL_AREA(#528296); +#528296 = FILL_AREA_STYLE('',(#528297)); +#528297 = FILL_AREA_STYLE_COLOUR('',#517768); +#528298 = OVER_RIDING_STYLED_ITEM('overriding color',(#528299),#51348, + #528177); +#528299 = PRESENTATION_STYLE_ASSIGNMENT((#528300)); +#528300 = SURFACE_STYLE_USAGE(.BOTH.,#528301); +#528301 = SURFACE_SIDE_STYLE('',(#528302)); +#528302 = SURFACE_STYLE_FILL_AREA(#528303); +#528303 = FILL_AREA_STYLE('',(#528304)); +#528304 = FILL_AREA_STYLE_COLOUR('',#517768); +#528305 = OVER_RIDING_STYLED_ITEM('overriding color',(#528306),#51365, + #528177); +#528306 = PRESENTATION_STYLE_ASSIGNMENT((#528307)); +#528307 = SURFACE_STYLE_USAGE(.BOTH.,#528308); +#528308 = SURFACE_SIDE_STYLE('',(#528309)); +#528309 = SURFACE_STYLE_FILL_AREA(#528310); +#528310 = FILL_AREA_STYLE('',(#528311)); +#528311 = FILL_AREA_STYLE_COLOUR('',#517768); +#528312 = STYLED_ITEM('color',(#528313),#51377); +#528313 = PRESENTATION_STYLE_ASSIGNMENT((#528314,#528319)); +#528314 = SURFACE_STYLE_USAGE(.BOTH.,#528315); +#528315 = SURFACE_SIDE_STYLE('',(#528316)); +#528316 = SURFACE_STYLE_FILL_AREA(#528317); +#528317 = FILL_AREA_STYLE('',(#528318)); +#528318 = FILL_AREA_STYLE_COLOUR('',#523837); +#528319 = CURVE_STYLE('',#528320,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528320 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528321 = OVER_RIDING_STYLED_ITEM('overriding color',(#528322),#51379, + #528312); +#528322 = PRESENTATION_STYLE_ASSIGNMENT((#528323)); +#528323 = SURFACE_STYLE_USAGE(.BOTH.,#528324); +#528324 = SURFACE_SIDE_STYLE('',(#528325)); +#528325 = SURFACE_STYLE_FILL_AREA(#528326); +#528326 = FILL_AREA_STYLE('',(#528327)); +#528327 = FILL_AREA_STYLE_COLOUR('',#517768); +#528328 = OVER_RIDING_STYLED_ITEM('overriding color',(#528329),#51419, + #528312); +#528329 = PRESENTATION_STYLE_ASSIGNMENT((#528330)); +#528330 = SURFACE_STYLE_USAGE(.BOTH.,#528331); +#528331 = SURFACE_SIDE_STYLE('',(#528332)); +#528332 = SURFACE_STYLE_FILL_AREA(#528333); +#528333 = FILL_AREA_STYLE('',(#528334)); +#528334 = FILL_AREA_STYLE_COLOUR('',#517768); +#528335 = OVER_RIDING_STYLED_ITEM('overriding color',(#528336),#51450, + #528312); +#528336 = PRESENTATION_STYLE_ASSIGNMENT((#528337)); +#528337 = SURFACE_STYLE_USAGE(.BOTH.,#528338); +#528338 = SURFACE_SIDE_STYLE('',(#528339)); +#528339 = SURFACE_STYLE_FILL_AREA(#528340); +#528340 = FILL_AREA_STYLE('',(#528341)); +#528341 = FILL_AREA_STYLE_COLOUR('',#517768); +#528342 = OVER_RIDING_STYLED_ITEM('overriding color',(#528343),#51481, + #528312); +#528343 = PRESENTATION_STYLE_ASSIGNMENT((#528344)); +#528344 = SURFACE_STYLE_USAGE(.BOTH.,#528345); +#528345 = SURFACE_SIDE_STYLE('',(#528346)); +#528346 = SURFACE_STYLE_FILL_AREA(#528347); +#528347 = FILL_AREA_STYLE('',(#528348)); +#528348 = FILL_AREA_STYLE_COLOUR('',#517768); +#528349 = OVER_RIDING_STYLED_ITEM('overriding color',(#528350),#51531, + #528312); +#528350 = PRESENTATION_STYLE_ASSIGNMENT((#528351)); +#528351 = SURFACE_STYLE_USAGE(.BOTH.,#528352); +#528352 = SURFACE_SIDE_STYLE('',(#528353)); +#528353 = SURFACE_STYLE_FILL_AREA(#528354); +#528354 = FILL_AREA_STYLE('',(#528355)); +#528355 = FILL_AREA_STYLE_COLOUR('',#517768); +#528356 = OVER_RIDING_STYLED_ITEM('overriding color',(#528357),#51562, + #528312); +#528357 = PRESENTATION_STYLE_ASSIGNMENT((#528358)); +#528358 = SURFACE_STYLE_USAGE(.BOTH.,#528359); +#528359 = SURFACE_SIDE_STYLE('',(#528360)); +#528360 = SURFACE_STYLE_FILL_AREA(#528361); +#528361 = FILL_AREA_STYLE('',(#528362)); +#528362 = FILL_AREA_STYLE_COLOUR('',#517768); +#528363 = OVER_RIDING_STYLED_ITEM('overriding color',(#528364),#51595, + #528312); +#528364 = PRESENTATION_STYLE_ASSIGNMENT((#528365)); +#528365 = SURFACE_STYLE_USAGE(.BOTH.,#528366); +#528366 = SURFACE_SIDE_STYLE('',(#528367)); +#528367 = SURFACE_STYLE_FILL_AREA(#528368); +#528368 = FILL_AREA_STYLE('',(#528369)); +#528369 = FILL_AREA_STYLE_COLOUR('',#517768); +#528370 = OVER_RIDING_STYLED_ITEM('overriding color',(#528371),#51612, + #528312); +#528371 = PRESENTATION_STYLE_ASSIGNMENT((#528372)); +#528372 = SURFACE_STYLE_USAGE(.BOTH.,#528373); +#528373 = SURFACE_SIDE_STYLE('',(#528374)); +#528374 = SURFACE_STYLE_FILL_AREA(#528375); +#528375 = FILL_AREA_STYLE('',(#528376)); +#528376 = FILL_AREA_STYLE_COLOUR('',#517768); +#528377 = OVER_RIDING_STYLED_ITEM('overriding color',(#528378),#51636, + #528312); +#528378 = PRESENTATION_STYLE_ASSIGNMENT((#528379)); +#528379 = SURFACE_STYLE_USAGE(.BOTH.,#528380); +#528380 = SURFACE_SIDE_STYLE('',(#528381)); +#528381 = SURFACE_STYLE_FILL_AREA(#528382); +#528382 = FILL_AREA_STYLE('',(#528383)); +#528383 = FILL_AREA_STYLE_COLOUR('',#517768); +#528384 = OVER_RIDING_STYLED_ITEM('overriding color',(#528385),#51667, + #528312); +#528385 = PRESENTATION_STYLE_ASSIGNMENT((#528386)); +#528386 = SURFACE_STYLE_USAGE(.BOTH.,#528387); +#528387 = SURFACE_SIDE_STYLE('',(#528388)); +#528388 = SURFACE_STYLE_FILL_AREA(#528389); +#528389 = FILL_AREA_STYLE('',(#528390)); +#528390 = FILL_AREA_STYLE_COLOUR('',#517768); +#528391 = OVER_RIDING_STYLED_ITEM('overriding color',(#528392),#51684, + #528312); +#528392 = PRESENTATION_STYLE_ASSIGNMENT((#528393)); +#528393 = SURFACE_STYLE_USAGE(.BOTH.,#528394); +#528394 = SURFACE_SIDE_STYLE('',(#528395)); +#528395 = SURFACE_STYLE_FILL_AREA(#528396); +#528396 = FILL_AREA_STYLE('',(#528397)); +#528397 = FILL_AREA_STYLE_COLOUR('',#517768); +#528398 = OVER_RIDING_STYLED_ITEM('overriding color',(#528399),#51713, + #528312); +#528399 = PRESENTATION_STYLE_ASSIGNMENT((#528400)); +#528400 = SURFACE_STYLE_USAGE(.BOTH.,#528401); +#528401 = SURFACE_SIDE_STYLE('',(#528402)); +#528402 = SURFACE_STYLE_FILL_AREA(#528403); +#528403 = FILL_AREA_STYLE('',(#528404)); +#528404 = FILL_AREA_STYLE_COLOUR('',#517768); +#528405 = OVER_RIDING_STYLED_ITEM('overriding color',(#528406),#51737, + #528312); +#528406 = PRESENTATION_STYLE_ASSIGNMENT((#528407)); +#528407 = SURFACE_STYLE_USAGE(.BOTH.,#528408); +#528408 = SURFACE_SIDE_STYLE('',(#528409)); +#528409 = SURFACE_STYLE_FILL_AREA(#528410); +#528410 = FILL_AREA_STYLE('',(#528411)); +#528411 = FILL_AREA_STYLE_COLOUR('',#517768); +#528412 = OVER_RIDING_STYLED_ITEM('overriding color',(#528413),#51763, + #528312); +#528413 = PRESENTATION_STYLE_ASSIGNMENT((#528414)); +#528414 = SURFACE_STYLE_USAGE(.BOTH.,#528415); +#528415 = SURFACE_SIDE_STYLE('',(#528416)); +#528416 = SURFACE_STYLE_FILL_AREA(#528417); +#528417 = FILL_AREA_STYLE('',(#528418)); +#528418 = FILL_AREA_STYLE_COLOUR('',#517768); +#528419 = OVER_RIDING_STYLED_ITEM('overriding color',(#528420),#51787, + #528312); +#528420 = PRESENTATION_STYLE_ASSIGNMENT((#528421)); +#528421 = SURFACE_STYLE_USAGE(.BOTH.,#528422); +#528422 = SURFACE_SIDE_STYLE('',(#528423)); +#528423 = SURFACE_STYLE_FILL_AREA(#528424); +#528424 = FILL_AREA_STYLE('',(#528425)); +#528425 = FILL_AREA_STYLE_COLOUR('',#517768); +#528426 = OVER_RIDING_STYLED_ITEM('overriding color',(#528427),#51814, + #528312); +#528427 = PRESENTATION_STYLE_ASSIGNMENT((#528428)); +#528428 = SURFACE_STYLE_USAGE(.BOTH.,#528429); +#528429 = SURFACE_SIDE_STYLE('',(#528430)); +#528430 = SURFACE_STYLE_FILL_AREA(#528431); +#528431 = FILL_AREA_STYLE('',(#528432)); +#528432 = FILL_AREA_STYLE_COLOUR('',#517768); +#528433 = OVER_RIDING_STYLED_ITEM('overriding color',(#528434),#51826, + #528312); +#528434 = PRESENTATION_STYLE_ASSIGNMENT((#528435)); +#528435 = SURFACE_STYLE_USAGE(.BOTH.,#528436); +#528436 = SURFACE_SIDE_STYLE('',(#528437)); +#528437 = SURFACE_STYLE_FILL_AREA(#528438); +#528438 = FILL_AREA_STYLE('',(#528439)); +#528439 = FILL_AREA_STYLE_COLOUR('',#517768); +#528440 = OVER_RIDING_STYLED_ITEM('overriding color',(#528441),#51843, + #528312); +#528441 = PRESENTATION_STYLE_ASSIGNMENT((#528442)); +#528442 = SURFACE_STYLE_USAGE(.BOTH.,#528443); +#528443 = SURFACE_SIDE_STYLE('',(#528444)); +#528444 = SURFACE_STYLE_FILL_AREA(#528445); +#528445 = FILL_AREA_STYLE('',(#528446)); +#528446 = FILL_AREA_STYLE_COLOUR('',#517768); +#528447 = STYLED_ITEM('color',(#528448),#51855); +#528448 = PRESENTATION_STYLE_ASSIGNMENT((#528449,#528454)); +#528449 = SURFACE_STYLE_USAGE(.BOTH.,#528450); +#528450 = SURFACE_SIDE_STYLE('',(#528451)); +#528451 = SURFACE_STYLE_FILL_AREA(#528452); +#528452 = FILL_AREA_STYLE('',(#528453)); +#528453 = FILL_AREA_STYLE_COLOUR('',#523837); +#528454 = CURVE_STYLE('',#528455,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528455 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528456 = OVER_RIDING_STYLED_ITEM('overriding color',(#528457),#51857, + #528447); +#528457 = PRESENTATION_STYLE_ASSIGNMENT((#528458)); +#528458 = SURFACE_STYLE_USAGE(.BOTH.,#528459); +#528459 = SURFACE_SIDE_STYLE('',(#528460)); +#528460 = SURFACE_STYLE_FILL_AREA(#528461); +#528461 = FILL_AREA_STYLE('',(#528462)); +#528462 = FILL_AREA_STYLE_COLOUR('',#517768); +#528463 = OVER_RIDING_STYLED_ITEM('overriding color',(#528464),#51897, + #528447); +#528464 = PRESENTATION_STYLE_ASSIGNMENT((#528465)); +#528465 = SURFACE_STYLE_USAGE(.BOTH.,#528466); +#528466 = SURFACE_SIDE_STYLE('',(#528467)); +#528467 = SURFACE_STYLE_FILL_AREA(#528468); +#528468 = FILL_AREA_STYLE('',(#528469)); +#528469 = FILL_AREA_STYLE_COLOUR('',#517768); +#528470 = OVER_RIDING_STYLED_ITEM('overriding color',(#528471),#51928, + #528447); +#528471 = PRESENTATION_STYLE_ASSIGNMENT((#528472)); +#528472 = SURFACE_STYLE_USAGE(.BOTH.,#528473); +#528473 = SURFACE_SIDE_STYLE('',(#528474)); +#528474 = SURFACE_STYLE_FILL_AREA(#528475); +#528475 = FILL_AREA_STYLE('',(#528476)); +#528476 = FILL_AREA_STYLE_COLOUR('',#517768); +#528477 = OVER_RIDING_STYLED_ITEM('overriding color',(#528478),#51959, + #528447); +#528478 = PRESENTATION_STYLE_ASSIGNMENT((#528479)); +#528479 = SURFACE_STYLE_USAGE(.BOTH.,#528480); +#528480 = SURFACE_SIDE_STYLE('',(#528481)); +#528481 = SURFACE_STYLE_FILL_AREA(#528482); +#528482 = FILL_AREA_STYLE('',(#528483)); +#528483 = FILL_AREA_STYLE_COLOUR('',#517768); +#528484 = OVER_RIDING_STYLED_ITEM('overriding color',(#528485),#52009, + #528447); +#528485 = PRESENTATION_STYLE_ASSIGNMENT((#528486)); +#528486 = SURFACE_STYLE_USAGE(.BOTH.,#528487); +#528487 = SURFACE_SIDE_STYLE('',(#528488)); +#528488 = SURFACE_STYLE_FILL_AREA(#528489); +#528489 = FILL_AREA_STYLE('',(#528490)); +#528490 = FILL_AREA_STYLE_COLOUR('',#517768); +#528491 = OVER_RIDING_STYLED_ITEM('overriding color',(#528492),#52040, + #528447); +#528492 = PRESENTATION_STYLE_ASSIGNMENT((#528493)); +#528493 = SURFACE_STYLE_USAGE(.BOTH.,#528494); +#528494 = SURFACE_SIDE_STYLE('',(#528495)); +#528495 = SURFACE_STYLE_FILL_AREA(#528496); +#528496 = FILL_AREA_STYLE('',(#528497)); +#528497 = FILL_AREA_STYLE_COLOUR('',#517768); +#528498 = OVER_RIDING_STYLED_ITEM('overriding color',(#528499),#52073, + #528447); +#528499 = PRESENTATION_STYLE_ASSIGNMENT((#528500)); +#528500 = SURFACE_STYLE_USAGE(.BOTH.,#528501); +#528501 = SURFACE_SIDE_STYLE('',(#528502)); +#528502 = SURFACE_STYLE_FILL_AREA(#528503); +#528503 = FILL_AREA_STYLE('',(#528504)); +#528504 = FILL_AREA_STYLE_COLOUR('',#517768); +#528505 = OVER_RIDING_STYLED_ITEM('overriding color',(#528506),#52090, + #528447); +#528506 = PRESENTATION_STYLE_ASSIGNMENT((#528507)); +#528507 = SURFACE_STYLE_USAGE(.BOTH.,#528508); +#528508 = SURFACE_SIDE_STYLE('',(#528509)); +#528509 = SURFACE_STYLE_FILL_AREA(#528510); +#528510 = FILL_AREA_STYLE('',(#528511)); +#528511 = FILL_AREA_STYLE_COLOUR('',#517768); +#528512 = OVER_RIDING_STYLED_ITEM('overriding color',(#528513),#52114, + #528447); +#528513 = PRESENTATION_STYLE_ASSIGNMENT((#528514)); +#528514 = SURFACE_STYLE_USAGE(.BOTH.,#528515); +#528515 = SURFACE_SIDE_STYLE('',(#528516)); +#528516 = SURFACE_STYLE_FILL_AREA(#528517); +#528517 = FILL_AREA_STYLE('',(#528518)); +#528518 = FILL_AREA_STYLE_COLOUR('',#517768); +#528519 = OVER_RIDING_STYLED_ITEM('overriding color',(#528520),#52145, + #528447); +#528520 = PRESENTATION_STYLE_ASSIGNMENT((#528521)); +#528521 = SURFACE_STYLE_USAGE(.BOTH.,#528522); +#528522 = SURFACE_SIDE_STYLE('',(#528523)); +#528523 = SURFACE_STYLE_FILL_AREA(#528524); +#528524 = FILL_AREA_STYLE('',(#528525)); +#528525 = FILL_AREA_STYLE_COLOUR('',#517768); +#528526 = OVER_RIDING_STYLED_ITEM('overriding color',(#528527),#52162, + #528447); +#528527 = PRESENTATION_STYLE_ASSIGNMENT((#528528)); +#528528 = SURFACE_STYLE_USAGE(.BOTH.,#528529); +#528529 = SURFACE_SIDE_STYLE('',(#528530)); +#528530 = SURFACE_STYLE_FILL_AREA(#528531); +#528531 = FILL_AREA_STYLE('',(#528532)); +#528532 = FILL_AREA_STYLE_COLOUR('',#517768); +#528533 = OVER_RIDING_STYLED_ITEM('overriding color',(#528534),#52191, + #528447); +#528534 = PRESENTATION_STYLE_ASSIGNMENT((#528535)); +#528535 = SURFACE_STYLE_USAGE(.BOTH.,#528536); +#528536 = SURFACE_SIDE_STYLE('',(#528537)); +#528537 = SURFACE_STYLE_FILL_AREA(#528538); +#528538 = FILL_AREA_STYLE('',(#528539)); +#528539 = FILL_AREA_STYLE_COLOUR('',#517768); +#528540 = OVER_RIDING_STYLED_ITEM('overriding color',(#528541),#52215, + #528447); +#528541 = PRESENTATION_STYLE_ASSIGNMENT((#528542)); +#528542 = SURFACE_STYLE_USAGE(.BOTH.,#528543); +#528543 = SURFACE_SIDE_STYLE('',(#528544)); +#528544 = SURFACE_STYLE_FILL_AREA(#528545); +#528545 = FILL_AREA_STYLE('',(#528546)); +#528546 = FILL_AREA_STYLE_COLOUR('',#517768); +#528547 = OVER_RIDING_STYLED_ITEM('overriding color',(#528548),#52241, + #528447); +#528548 = PRESENTATION_STYLE_ASSIGNMENT((#528549)); +#528549 = SURFACE_STYLE_USAGE(.BOTH.,#528550); +#528550 = SURFACE_SIDE_STYLE('',(#528551)); +#528551 = SURFACE_STYLE_FILL_AREA(#528552); +#528552 = FILL_AREA_STYLE('',(#528553)); +#528553 = FILL_AREA_STYLE_COLOUR('',#517768); +#528554 = OVER_RIDING_STYLED_ITEM('overriding color',(#528555),#52265, + #528447); +#528555 = PRESENTATION_STYLE_ASSIGNMENT((#528556)); +#528556 = SURFACE_STYLE_USAGE(.BOTH.,#528557); +#528557 = SURFACE_SIDE_STYLE('',(#528558)); +#528558 = SURFACE_STYLE_FILL_AREA(#528559); +#528559 = FILL_AREA_STYLE('',(#528560)); +#528560 = FILL_AREA_STYLE_COLOUR('',#517768); +#528561 = OVER_RIDING_STYLED_ITEM('overriding color',(#528562),#52292, + #528447); +#528562 = PRESENTATION_STYLE_ASSIGNMENT((#528563)); +#528563 = SURFACE_STYLE_USAGE(.BOTH.,#528564); +#528564 = SURFACE_SIDE_STYLE('',(#528565)); +#528565 = SURFACE_STYLE_FILL_AREA(#528566); +#528566 = FILL_AREA_STYLE('',(#528567)); +#528567 = FILL_AREA_STYLE_COLOUR('',#517768); +#528568 = OVER_RIDING_STYLED_ITEM('overriding color',(#528569),#52304, + #528447); +#528569 = PRESENTATION_STYLE_ASSIGNMENT((#528570)); +#528570 = SURFACE_STYLE_USAGE(.BOTH.,#528571); +#528571 = SURFACE_SIDE_STYLE('',(#528572)); +#528572 = SURFACE_STYLE_FILL_AREA(#528573); +#528573 = FILL_AREA_STYLE('',(#528574)); +#528574 = FILL_AREA_STYLE_COLOUR('',#517768); +#528575 = OVER_RIDING_STYLED_ITEM('overriding color',(#528576),#52321, + #528447); +#528576 = PRESENTATION_STYLE_ASSIGNMENT((#528577)); +#528577 = SURFACE_STYLE_USAGE(.BOTH.,#528578); +#528578 = SURFACE_SIDE_STYLE('',(#528579)); +#528579 = SURFACE_STYLE_FILL_AREA(#528580); +#528580 = FILL_AREA_STYLE('',(#528581)); +#528581 = FILL_AREA_STYLE_COLOUR('',#517768); +#528582 = STYLED_ITEM('color',(#528583),#52333); +#528583 = PRESENTATION_STYLE_ASSIGNMENT((#528584,#528589)); +#528584 = SURFACE_STYLE_USAGE(.BOTH.,#528585); +#528585 = SURFACE_SIDE_STYLE('',(#528586)); +#528586 = SURFACE_STYLE_FILL_AREA(#528587); +#528587 = FILL_AREA_STYLE('',(#528588)); +#528588 = FILL_AREA_STYLE_COLOUR('',#523837); +#528589 = CURVE_STYLE('',#528590,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528590 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528591 = OVER_RIDING_STYLED_ITEM('overriding color',(#528592),#52335, + #528582); +#528592 = PRESENTATION_STYLE_ASSIGNMENT((#528593)); +#528593 = SURFACE_STYLE_USAGE(.BOTH.,#528594); +#528594 = SURFACE_SIDE_STYLE('',(#528595)); +#528595 = SURFACE_STYLE_FILL_AREA(#528596); +#528596 = FILL_AREA_STYLE('',(#528597)); +#528597 = FILL_AREA_STYLE_COLOUR('',#517768); +#528598 = OVER_RIDING_STYLED_ITEM('overriding color',(#528599),#52375, + #528582); +#528599 = PRESENTATION_STYLE_ASSIGNMENT((#528600)); +#528600 = SURFACE_STYLE_USAGE(.BOTH.,#528601); +#528601 = SURFACE_SIDE_STYLE('',(#528602)); +#528602 = SURFACE_STYLE_FILL_AREA(#528603); +#528603 = FILL_AREA_STYLE('',(#528604)); +#528604 = FILL_AREA_STYLE_COLOUR('',#517768); +#528605 = OVER_RIDING_STYLED_ITEM('overriding color',(#528606),#52406, + #528582); +#528606 = PRESENTATION_STYLE_ASSIGNMENT((#528607)); +#528607 = SURFACE_STYLE_USAGE(.BOTH.,#528608); +#528608 = SURFACE_SIDE_STYLE('',(#528609)); +#528609 = SURFACE_STYLE_FILL_AREA(#528610); +#528610 = FILL_AREA_STYLE('',(#528611)); +#528611 = FILL_AREA_STYLE_COLOUR('',#517768); +#528612 = OVER_RIDING_STYLED_ITEM('overriding color',(#528613),#52437, + #528582); +#528613 = PRESENTATION_STYLE_ASSIGNMENT((#528614)); +#528614 = SURFACE_STYLE_USAGE(.BOTH.,#528615); +#528615 = SURFACE_SIDE_STYLE('',(#528616)); +#528616 = SURFACE_STYLE_FILL_AREA(#528617); +#528617 = FILL_AREA_STYLE('',(#528618)); +#528618 = FILL_AREA_STYLE_COLOUR('',#517768); +#528619 = OVER_RIDING_STYLED_ITEM('overriding color',(#528620),#52487, + #528582); +#528620 = PRESENTATION_STYLE_ASSIGNMENT((#528621)); +#528621 = SURFACE_STYLE_USAGE(.BOTH.,#528622); +#528622 = SURFACE_SIDE_STYLE('',(#528623)); +#528623 = SURFACE_STYLE_FILL_AREA(#528624); +#528624 = FILL_AREA_STYLE('',(#528625)); +#528625 = FILL_AREA_STYLE_COLOUR('',#517768); +#528626 = OVER_RIDING_STYLED_ITEM('overriding color',(#528627),#52518, + #528582); +#528627 = PRESENTATION_STYLE_ASSIGNMENT((#528628)); +#528628 = SURFACE_STYLE_USAGE(.BOTH.,#528629); +#528629 = SURFACE_SIDE_STYLE('',(#528630)); +#528630 = SURFACE_STYLE_FILL_AREA(#528631); +#528631 = FILL_AREA_STYLE('',(#528632)); +#528632 = FILL_AREA_STYLE_COLOUR('',#517768); +#528633 = OVER_RIDING_STYLED_ITEM('overriding color',(#528634),#52551, + #528582); +#528634 = PRESENTATION_STYLE_ASSIGNMENT((#528635)); +#528635 = SURFACE_STYLE_USAGE(.BOTH.,#528636); +#528636 = SURFACE_SIDE_STYLE('',(#528637)); +#528637 = SURFACE_STYLE_FILL_AREA(#528638); +#528638 = FILL_AREA_STYLE('',(#528639)); +#528639 = FILL_AREA_STYLE_COLOUR('',#517768); +#528640 = OVER_RIDING_STYLED_ITEM('overriding color',(#528641),#52568, + #528582); +#528641 = PRESENTATION_STYLE_ASSIGNMENT((#528642)); +#528642 = SURFACE_STYLE_USAGE(.BOTH.,#528643); +#528643 = SURFACE_SIDE_STYLE('',(#528644)); +#528644 = SURFACE_STYLE_FILL_AREA(#528645); +#528645 = FILL_AREA_STYLE('',(#528646)); +#528646 = FILL_AREA_STYLE_COLOUR('',#517768); +#528647 = OVER_RIDING_STYLED_ITEM('overriding color',(#528648),#52592, + #528582); +#528648 = PRESENTATION_STYLE_ASSIGNMENT((#528649)); +#528649 = SURFACE_STYLE_USAGE(.BOTH.,#528650); +#528650 = SURFACE_SIDE_STYLE('',(#528651)); +#528651 = SURFACE_STYLE_FILL_AREA(#528652); +#528652 = FILL_AREA_STYLE('',(#528653)); +#528653 = FILL_AREA_STYLE_COLOUR('',#517768); +#528654 = OVER_RIDING_STYLED_ITEM('overriding color',(#528655),#52623, + #528582); +#528655 = PRESENTATION_STYLE_ASSIGNMENT((#528656)); +#528656 = SURFACE_STYLE_USAGE(.BOTH.,#528657); +#528657 = SURFACE_SIDE_STYLE('',(#528658)); +#528658 = SURFACE_STYLE_FILL_AREA(#528659); +#528659 = FILL_AREA_STYLE('',(#528660)); +#528660 = FILL_AREA_STYLE_COLOUR('',#517768); +#528661 = OVER_RIDING_STYLED_ITEM('overriding color',(#528662),#52640, + #528582); +#528662 = PRESENTATION_STYLE_ASSIGNMENT((#528663)); +#528663 = SURFACE_STYLE_USAGE(.BOTH.,#528664); +#528664 = SURFACE_SIDE_STYLE('',(#528665)); +#528665 = SURFACE_STYLE_FILL_AREA(#528666); +#528666 = FILL_AREA_STYLE('',(#528667)); +#528667 = FILL_AREA_STYLE_COLOUR('',#517768); +#528668 = OVER_RIDING_STYLED_ITEM('overriding color',(#528669),#52669, + #528582); +#528669 = PRESENTATION_STYLE_ASSIGNMENT((#528670)); +#528670 = SURFACE_STYLE_USAGE(.BOTH.,#528671); +#528671 = SURFACE_SIDE_STYLE('',(#528672)); +#528672 = SURFACE_STYLE_FILL_AREA(#528673); +#528673 = FILL_AREA_STYLE('',(#528674)); +#528674 = FILL_AREA_STYLE_COLOUR('',#517768); +#528675 = OVER_RIDING_STYLED_ITEM('overriding color',(#528676),#52693, + #528582); +#528676 = PRESENTATION_STYLE_ASSIGNMENT((#528677)); +#528677 = SURFACE_STYLE_USAGE(.BOTH.,#528678); +#528678 = SURFACE_SIDE_STYLE('',(#528679)); +#528679 = SURFACE_STYLE_FILL_AREA(#528680); +#528680 = FILL_AREA_STYLE('',(#528681)); +#528681 = FILL_AREA_STYLE_COLOUR('',#517768); +#528682 = OVER_RIDING_STYLED_ITEM('overriding color',(#528683),#52719, + #528582); +#528683 = PRESENTATION_STYLE_ASSIGNMENT((#528684)); +#528684 = SURFACE_STYLE_USAGE(.BOTH.,#528685); +#528685 = SURFACE_SIDE_STYLE('',(#528686)); +#528686 = SURFACE_STYLE_FILL_AREA(#528687); +#528687 = FILL_AREA_STYLE('',(#528688)); +#528688 = FILL_AREA_STYLE_COLOUR('',#517768); +#528689 = OVER_RIDING_STYLED_ITEM('overriding color',(#528690),#52743, + #528582); +#528690 = PRESENTATION_STYLE_ASSIGNMENT((#528691)); +#528691 = SURFACE_STYLE_USAGE(.BOTH.,#528692); +#528692 = SURFACE_SIDE_STYLE('',(#528693)); +#528693 = SURFACE_STYLE_FILL_AREA(#528694); +#528694 = FILL_AREA_STYLE('',(#528695)); +#528695 = FILL_AREA_STYLE_COLOUR('',#517768); +#528696 = OVER_RIDING_STYLED_ITEM('overriding color',(#528697),#52770, + #528582); +#528697 = PRESENTATION_STYLE_ASSIGNMENT((#528698)); +#528698 = SURFACE_STYLE_USAGE(.BOTH.,#528699); +#528699 = SURFACE_SIDE_STYLE('',(#528700)); +#528700 = SURFACE_STYLE_FILL_AREA(#528701); +#528701 = FILL_AREA_STYLE('',(#528702)); +#528702 = FILL_AREA_STYLE_COLOUR('',#517768); +#528703 = OVER_RIDING_STYLED_ITEM('overriding color',(#528704),#52782, + #528582); +#528704 = PRESENTATION_STYLE_ASSIGNMENT((#528705)); +#528705 = SURFACE_STYLE_USAGE(.BOTH.,#528706); +#528706 = SURFACE_SIDE_STYLE('',(#528707)); +#528707 = SURFACE_STYLE_FILL_AREA(#528708); +#528708 = FILL_AREA_STYLE('',(#528709)); +#528709 = FILL_AREA_STYLE_COLOUR('',#517768); +#528710 = OVER_RIDING_STYLED_ITEM('overriding color',(#528711),#52799, + #528582); +#528711 = PRESENTATION_STYLE_ASSIGNMENT((#528712)); +#528712 = SURFACE_STYLE_USAGE(.BOTH.,#528713); +#528713 = SURFACE_SIDE_STYLE('',(#528714)); +#528714 = SURFACE_STYLE_FILL_AREA(#528715); +#528715 = FILL_AREA_STYLE('',(#528716)); +#528716 = FILL_AREA_STYLE_COLOUR('',#517768); +#528717 = STYLED_ITEM('color',(#528718),#52811); +#528718 = PRESENTATION_STYLE_ASSIGNMENT((#528719,#528724)); +#528719 = SURFACE_STYLE_USAGE(.BOTH.,#528720); +#528720 = SURFACE_SIDE_STYLE('',(#528721)); +#528721 = SURFACE_STYLE_FILL_AREA(#528722); +#528722 = FILL_AREA_STYLE('',(#528723)); +#528723 = FILL_AREA_STYLE_COLOUR('',#523837); +#528724 = CURVE_STYLE('',#528725,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528725 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528726 = OVER_RIDING_STYLED_ITEM('overriding color',(#528727),#52813, + #528717); +#528727 = PRESENTATION_STYLE_ASSIGNMENT((#528728)); +#528728 = SURFACE_STYLE_USAGE(.BOTH.,#528729); +#528729 = SURFACE_SIDE_STYLE('',(#528730)); +#528730 = SURFACE_STYLE_FILL_AREA(#528731); +#528731 = FILL_AREA_STYLE('',(#528732)); +#528732 = FILL_AREA_STYLE_COLOUR('',#517768); +#528733 = OVER_RIDING_STYLED_ITEM('overriding color',(#528734),#52853, + #528717); +#528734 = PRESENTATION_STYLE_ASSIGNMENT((#528735)); +#528735 = SURFACE_STYLE_USAGE(.BOTH.,#528736); +#528736 = SURFACE_SIDE_STYLE('',(#528737)); +#528737 = SURFACE_STYLE_FILL_AREA(#528738); +#528738 = FILL_AREA_STYLE('',(#528739)); +#528739 = FILL_AREA_STYLE_COLOUR('',#517768); +#528740 = OVER_RIDING_STYLED_ITEM('overriding color',(#528741),#52884, + #528717); +#528741 = PRESENTATION_STYLE_ASSIGNMENT((#528742)); +#528742 = SURFACE_STYLE_USAGE(.BOTH.,#528743); +#528743 = SURFACE_SIDE_STYLE('',(#528744)); +#528744 = SURFACE_STYLE_FILL_AREA(#528745); +#528745 = FILL_AREA_STYLE('',(#528746)); +#528746 = FILL_AREA_STYLE_COLOUR('',#517768); +#528747 = OVER_RIDING_STYLED_ITEM('overriding color',(#528748),#52915, + #528717); +#528748 = PRESENTATION_STYLE_ASSIGNMENT((#528749)); +#528749 = SURFACE_STYLE_USAGE(.BOTH.,#528750); +#528750 = SURFACE_SIDE_STYLE('',(#528751)); +#528751 = SURFACE_STYLE_FILL_AREA(#528752); +#528752 = FILL_AREA_STYLE('',(#528753)); +#528753 = FILL_AREA_STYLE_COLOUR('',#517768); +#528754 = OVER_RIDING_STYLED_ITEM('overriding color',(#528755),#52965, + #528717); +#528755 = PRESENTATION_STYLE_ASSIGNMENT((#528756)); +#528756 = SURFACE_STYLE_USAGE(.BOTH.,#528757); +#528757 = SURFACE_SIDE_STYLE('',(#528758)); +#528758 = SURFACE_STYLE_FILL_AREA(#528759); +#528759 = FILL_AREA_STYLE('',(#528760)); +#528760 = FILL_AREA_STYLE_COLOUR('',#517768); +#528761 = OVER_RIDING_STYLED_ITEM('overriding color',(#528762),#52996, + #528717); +#528762 = PRESENTATION_STYLE_ASSIGNMENT((#528763)); +#528763 = SURFACE_STYLE_USAGE(.BOTH.,#528764); +#528764 = SURFACE_SIDE_STYLE('',(#528765)); +#528765 = SURFACE_STYLE_FILL_AREA(#528766); +#528766 = FILL_AREA_STYLE('',(#528767)); +#528767 = FILL_AREA_STYLE_COLOUR('',#517768); +#528768 = OVER_RIDING_STYLED_ITEM('overriding color',(#528769),#53029, + #528717); +#528769 = PRESENTATION_STYLE_ASSIGNMENT((#528770)); +#528770 = SURFACE_STYLE_USAGE(.BOTH.,#528771); +#528771 = SURFACE_SIDE_STYLE('',(#528772)); +#528772 = SURFACE_STYLE_FILL_AREA(#528773); +#528773 = FILL_AREA_STYLE('',(#528774)); +#528774 = FILL_AREA_STYLE_COLOUR('',#517768); +#528775 = OVER_RIDING_STYLED_ITEM('overriding color',(#528776),#53046, + #528717); +#528776 = PRESENTATION_STYLE_ASSIGNMENT((#528777)); +#528777 = SURFACE_STYLE_USAGE(.BOTH.,#528778); +#528778 = SURFACE_SIDE_STYLE('',(#528779)); +#528779 = SURFACE_STYLE_FILL_AREA(#528780); +#528780 = FILL_AREA_STYLE('',(#528781)); +#528781 = FILL_AREA_STYLE_COLOUR('',#517768); +#528782 = OVER_RIDING_STYLED_ITEM('overriding color',(#528783),#53070, + #528717); +#528783 = PRESENTATION_STYLE_ASSIGNMENT((#528784)); +#528784 = SURFACE_STYLE_USAGE(.BOTH.,#528785); +#528785 = SURFACE_SIDE_STYLE('',(#528786)); +#528786 = SURFACE_STYLE_FILL_AREA(#528787); +#528787 = FILL_AREA_STYLE('',(#528788)); +#528788 = FILL_AREA_STYLE_COLOUR('',#517768); +#528789 = OVER_RIDING_STYLED_ITEM('overriding color',(#528790),#53101, + #528717); +#528790 = PRESENTATION_STYLE_ASSIGNMENT((#528791)); +#528791 = SURFACE_STYLE_USAGE(.BOTH.,#528792); +#528792 = SURFACE_SIDE_STYLE('',(#528793)); +#528793 = SURFACE_STYLE_FILL_AREA(#528794); +#528794 = FILL_AREA_STYLE('',(#528795)); +#528795 = FILL_AREA_STYLE_COLOUR('',#517768); +#528796 = OVER_RIDING_STYLED_ITEM('overriding color',(#528797),#53118, + #528717); +#528797 = PRESENTATION_STYLE_ASSIGNMENT((#528798)); +#528798 = SURFACE_STYLE_USAGE(.BOTH.,#528799); +#528799 = SURFACE_SIDE_STYLE('',(#528800)); +#528800 = SURFACE_STYLE_FILL_AREA(#528801); +#528801 = FILL_AREA_STYLE('',(#528802)); +#528802 = FILL_AREA_STYLE_COLOUR('',#517768); +#528803 = OVER_RIDING_STYLED_ITEM('overriding color',(#528804),#53147, + #528717); +#528804 = PRESENTATION_STYLE_ASSIGNMENT((#528805)); +#528805 = SURFACE_STYLE_USAGE(.BOTH.,#528806); +#528806 = SURFACE_SIDE_STYLE('',(#528807)); +#528807 = SURFACE_STYLE_FILL_AREA(#528808); +#528808 = FILL_AREA_STYLE('',(#528809)); +#528809 = FILL_AREA_STYLE_COLOUR('',#517768); +#528810 = OVER_RIDING_STYLED_ITEM('overriding color',(#528811),#53171, + #528717); +#528811 = PRESENTATION_STYLE_ASSIGNMENT((#528812)); +#528812 = SURFACE_STYLE_USAGE(.BOTH.,#528813); +#528813 = SURFACE_SIDE_STYLE('',(#528814)); +#528814 = SURFACE_STYLE_FILL_AREA(#528815); +#528815 = FILL_AREA_STYLE('',(#528816)); +#528816 = FILL_AREA_STYLE_COLOUR('',#517768); +#528817 = OVER_RIDING_STYLED_ITEM('overriding color',(#528818),#53197, + #528717); +#528818 = PRESENTATION_STYLE_ASSIGNMENT((#528819)); +#528819 = SURFACE_STYLE_USAGE(.BOTH.,#528820); +#528820 = SURFACE_SIDE_STYLE('',(#528821)); +#528821 = SURFACE_STYLE_FILL_AREA(#528822); +#528822 = FILL_AREA_STYLE('',(#528823)); +#528823 = FILL_AREA_STYLE_COLOUR('',#517768); +#528824 = OVER_RIDING_STYLED_ITEM('overriding color',(#528825),#53221, + #528717); +#528825 = PRESENTATION_STYLE_ASSIGNMENT((#528826)); +#528826 = SURFACE_STYLE_USAGE(.BOTH.,#528827); +#528827 = SURFACE_SIDE_STYLE('',(#528828)); +#528828 = SURFACE_STYLE_FILL_AREA(#528829); +#528829 = FILL_AREA_STYLE('',(#528830)); +#528830 = FILL_AREA_STYLE_COLOUR('',#517768); +#528831 = OVER_RIDING_STYLED_ITEM('overriding color',(#528832),#53248, + #528717); +#528832 = PRESENTATION_STYLE_ASSIGNMENT((#528833)); +#528833 = SURFACE_STYLE_USAGE(.BOTH.,#528834); +#528834 = SURFACE_SIDE_STYLE('',(#528835)); +#528835 = SURFACE_STYLE_FILL_AREA(#528836); +#528836 = FILL_AREA_STYLE('',(#528837)); +#528837 = FILL_AREA_STYLE_COLOUR('',#517768); +#528838 = OVER_RIDING_STYLED_ITEM('overriding color',(#528839),#53260, + #528717); +#528839 = PRESENTATION_STYLE_ASSIGNMENT((#528840)); +#528840 = SURFACE_STYLE_USAGE(.BOTH.,#528841); +#528841 = SURFACE_SIDE_STYLE('',(#528842)); +#528842 = SURFACE_STYLE_FILL_AREA(#528843); +#528843 = FILL_AREA_STYLE('',(#528844)); +#528844 = FILL_AREA_STYLE_COLOUR('',#517768); +#528845 = OVER_RIDING_STYLED_ITEM('overriding color',(#528846),#53277, + #528717); +#528846 = PRESENTATION_STYLE_ASSIGNMENT((#528847)); +#528847 = SURFACE_STYLE_USAGE(.BOTH.,#528848); +#528848 = SURFACE_SIDE_STYLE('',(#528849)); +#528849 = SURFACE_STYLE_FILL_AREA(#528850); +#528850 = FILL_AREA_STYLE('',(#528851)); +#528851 = FILL_AREA_STYLE_COLOUR('',#517768); +#528852 = STYLED_ITEM('color',(#528853),#53289); +#528853 = PRESENTATION_STYLE_ASSIGNMENT((#528854,#528859)); +#528854 = SURFACE_STYLE_USAGE(.BOTH.,#528855); +#528855 = SURFACE_SIDE_STYLE('',(#528856)); +#528856 = SURFACE_STYLE_FILL_AREA(#528857); +#528857 = FILL_AREA_STYLE('',(#528858)); +#528858 = FILL_AREA_STYLE_COLOUR('',#523837); +#528859 = CURVE_STYLE('',#528860,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528860 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528861 = OVER_RIDING_STYLED_ITEM('overriding color',(#528862),#53291, + #528852); +#528862 = PRESENTATION_STYLE_ASSIGNMENT((#528863)); +#528863 = SURFACE_STYLE_USAGE(.BOTH.,#528864); +#528864 = SURFACE_SIDE_STYLE('',(#528865)); +#528865 = SURFACE_STYLE_FILL_AREA(#528866); +#528866 = FILL_AREA_STYLE('',(#528867)); +#528867 = FILL_AREA_STYLE_COLOUR('',#517768); +#528868 = OVER_RIDING_STYLED_ITEM('overriding color',(#528869),#53331, + #528852); +#528869 = PRESENTATION_STYLE_ASSIGNMENT((#528870)); +#528870 = SURFACE_STYLE_USAGE(.BOTH.,#528871); +#528871 = SURFACE_SIDE_STYLE('',(#528872)); +#528872 = SURFACE_STYLE_FILL_AREA(#528873); +#528873 = FILL_AREA_STYLE('',(#528874)); +#528874 = FILL_AREA_STYLE_COLOUR('',#517768); +#528875 = OVER_RIDING_STYLED_ITEM('overriding color',(#528876),#53362, + #528852); +#528876 = PRESENTATION_STYLE_ASSIGNMENT((#528877)); +#528877 = SURFACE_STYLE_USAGE(.BOTH.,#528878); +#528878 = SURFACE_SIDE_STYLE('',(#528879)); +#528879 = SURFACE_STYLE_FILL_AREA(#528880); +#528880 = FILL_AREA_STYLE('',(#528881)); +#528881 = FILL_AREA_STYLE_COLOUR('',#517768); +#528882 = OVER_RIDING_STYLED_ITEM('overriding color',(#528883),#53393, + #528852); +#528883 = PRESENTATION_STYLE_ASSIGNMENT((#528884)); +#528884 = SURFACE_STYLE_USAGE(.BOTH.,#528885); +#528885 = SURFACE_SIDE_STYLE('',(#528886)); +#528886 = SURFACE_STYLE_FILL_AREA(#528887); +#528887 = FILL_AREA_STYLE('',(#528888)); +#528888 = FILL_AREA_STYLE_COLOUR('',#517768); +#528889 = OVER_RIDING_STYLED_ITEM('overriding color',(#528890),#53443, + #528852); +#528890 = PRESENTATION_STYLE_ASSIGNMENT((#528891)); +#528891 = SURFACE_STYLE_USAGE(.BOTH.,#528892); +#528892 = SURFACE_SIDE_STYLE('',(#528893)); +#528893 = SURFACE_STYLE_FILL_AREA(#528894); +#528894 = FILL_AREA_STYLE('',(#528895)); +#528895 = FILL_AREA_STYLE_COLOUR('',#517768); +#528896 = OVER_RIDING_STYLED_ITEM('overriding color',(#528897),#53474, + #528852); +#528897 = PRESENTATION_STYLE_ASSIGNMENT((#528898)); +#528898 = SURFACE_STYLE_USAGE(.BOTH.,#528899); +#528899 = SURFACE_SIDE_STYLE('',(#528900)); +#528900 = SURFACE_STYLE_FILL_AREA(#528901); +#528901 = FILL_AREA_STYLE('',(#528902)); +#528902 = FILL_AREA_STYLE_COLOUR('',#517768); +#528903 = OVER_RIDING_STYLED_ITEM('overriding color',(#528904),#53507, + #528852); +#528904 = PRESENTATION_STYLE_ASSIGNMENT((#528905)); +#528905 = SURFACE_STYLE_USAGE(.BOTH.,#528906); +#528906 = SURFACE_SIDE_STYLE('',(#528907)); +#528907 = SURFACE_STYLE_FILL_AREA(#528908); +#528908 = FILL_AREA_STYLE('',(#528909)); +#528909 = FILL_AREA_STYLE_COLOUR('',#517768); +#528910 = OVER_RIDING_STYLED_ITEM('overriding color',(#528911),#53524, + #528852); +#528911 = PRESENTATION_STYLE_ASSIGNMENT((#528912)); +#528912 = SURFACE_STYLE_USAGE(.BOTH.,#528913); +#528913 = SURFACE_SIDE_STYLE('',(#528914)); +#528914 = SURFACE_STYLE_FILL_AREA(#528915); +#528915 = FILL_AREA_STYLE('',(#528916)); +#528916 = FILL_AREA_STYLE_COLOUR('',#517768); +#528917 = OVER_RIDING_STYLED_ITEM('overriding color',(#528918),#53548, + #528852); +#528918 = PRESENTATION_STYLE_ASSIGNMENT((#528919)); +#528919 = SURFACE_STYLE_USAGE(.BOTH.,#528920); +#528920 = SURFACE_SIDE_STYLE('',(#528921)); +#528921 = SURFACE_STYLE_FILL_AREA(#528922); +#528922 = FILL_AREA_STYLE('',(#528923)); +#528923 = FILL_AREA_STYLE_COLOUR('',#517768); +#528924 = OVER_RIDING_STYLED_ITEM('overriding color',(#528925),#53579, + #528852); +#528925 = PRESENTATION_STYLE_ASSIGNMENT((#528926)); +#528926 = SURFACE_STYLE_USAGE(.BOTH.,#528927); +#528927 = SURFACE_SIDE_STYLE('',(#528928)); +#528928 = SURFACE_STYLE_FILL_AREA(#528929); +#528929 = FILL_AREA_STYLE('',(#528930)); +#528930 = FILL_AREA_STYLE_COLOUR('',#517768); +#528931 = OVER_RIDING_STYLED_ITEM('overriding color',(#528932),#53596, + #528852); +#528932 = PRESENTATION_STYLE_ASSIGNMENT((#528933)); +#528933 = SURFACE_STYLE_USAGE(.BOTH.,#528934); +#528934 = SURFACE_SIDE_STYLE('',(#528935)); +#528935 = SURFACE_STYLE_FILL_AREA(#528936); +#528936 = FILL_AREA_STYLE('',(#528937)); +#528937 = FILL_AREA_STYLE_COLOUR('',#517768); +#528938 = OVER_RIDING_STYLED_ITEM('overriding color',(#528939),#53625, + #528852); +#528939 = PRESENTATION_STYLE_ASSIGNMENT((#528940)); +#528940 = SURFACE_STYLE_USAGE(.BOTH.,#528941); +#528941 = SURFACE_SIDE_STYLE('',(#528942)); +#528942 = SURFACE_STYLE_FILL_AREA(#528943); +#528943 = FILL_AREA_STYLE('',(#528944)); +#528944 = FILL_AREA_STYLE_COLOUR('',#517768); +#528945 = OVER_RIDING_STYLED_ITEM('overriding color',(#528946),#53649, + #528852); +#528946 = PRESENTATION_STYLE_ASSIGNMENT((#528947)); +#528947 = SURFACE_STYLE_USAGE(.BOTH.,#528948); +#528948 = SURFACE_SIDE_STYLE('',(#528949)); +#528949 = SURFACE_STYLE_FILL_AREA(#528950); +#528950 = FILL_AREA_STYLE('',(#528951)); +#528951 = FILL_AREA_STYLE_COLOUR('',#517768); +#528952 = OVER_RIDING_STYLED_ITEM('overriding color',(#528953),#53675, + #528852); +#528953 = PRESENTATION_STYLE_ASSIGNMENT((#528954)); +#528954 = SURFACE_STYLE_USAGE(.BOTH.,#528955); +#528955 = SURFACE_SIDE_STYLE('',(#528956)); +#528956 = SURFACE_STYLE_FILL_AREA(#528957); +#528957 = FILL_AREA_STYLE('',(#528958)); +#528958 = FILL_AREA_STYLE_COLOUR('',#517768); +#528959 = OVER_RIDING_STYLED_ITEM('overriding color',(#528960),#53699, + #528852); +#528960 = PRESENTATION_STYLE_ASSIGNMENT((#528961)); +#528961 = SURFACE_STYLE_USAGE(.BOTH.,#528962); +#528962 = SURFACE_SIDE_STYLE('',(#528963)); +#528963 = SURFACE_STYLE_FILL_AREA(#528964); +#528964 = FILL_AREA_STYLE('',(#528965)); +#528965 = FILL_AREA_STYLE_COLOUR('',#517768); +#528966 = OVER_RIDING_STYLED_ITEM('overriding color',(#528967),#53726, + #528852); +#528967 = PRESENTATION_STYLE_ASSIGNMENT((#528968)); +#528968 = SURFACE_STYLE_USAGE(.BOTH.,#528969); +#528969 = SURFACE_SIDE_STYLE('',(#528970)); +#528970 = SURFACE_STYLE_FILL_AREA(#528971); +#528971 = FILL_AREA_STYLE('',(#528972)); +#528972 = FILL_AREA_STYLE_COLOUR('',#517768); +#528973 = OVER_RIDING_STYLED_ITEM('overriding color',(#528974),#53738, + #528852); +#528974 = PRESENTATION_STYLE_ASSIGNMENT((#528975)); +#528975 = SURFACE_STYLE_USAGE(.BOTH.,#528976); +#528976 = SURFACE_SIDE_STYLE('',(#528977)); +#528977 = SURFACE_STYLE_FILL_AREA(#528978); +#528978 = FILL_AREA_STYLE('',(#528979)); +#528979 = FILL_AREA_STYLE_COLOUR('',#517768); +#528980 = OVER_RIDING_STYLED_ITEM('overriding color',(#528981),#53755, + #528852); +#528981 = PRESENTATION_STYLE_ASSIGNMENT((#528982)); +#528982 = SURFACE_STYLE_USAGE(.BOTH.,#528983); +#528983 = SURFACE_SIDE_STYLE('',(#528984)); +#528984 = SURFACE_STYLE_FILL_AREA(#528985); +#528985 = FILL_AREA_STYLE('',(#528986)); +#528986 = FILL_AREA_STYLE_COLOUR('',#517768); +#528987 = STYLED_ITEM('color',(#528988),#53767); +#528988 = PRESENTATION_STYLE_ASSIGNMENT((#528989,#528994)); +#528989 = SURFACE_STYLE_USAGE(.BOTH.,#528990); +#528990 = SURFACE_SIDE_STYLE('',(#528991)); +#528991 = SURFACE_STYLE_FILL_AREA(#528992); +#528992 = FILL_AREA_STYLE('',(#528993)); +#528993 = FILL_AREA_STYLE_COLOUR('',#523837); +#528994 = CURVE_STYLE('',#528995,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#528995 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#528996 = OVER_RIDING_STYLED_ITEM('overriding color',(#528997),#53769, + #528987); +#528997 = PRESENTATION_STYLE_ASSIGNMENT((#528998)); +#528998 = SURFACE_STYLE_USAGE(.BOTH.,#528999); +#528999 = SURFACE_SIDE_STYLE('',(#529000)); +#529000 = SURFACE_STYLE_FILL_AREA(#529001); +#529001 = FILL_AREA_STYLE('',(#529002)); +#529002 = FILL_AREA_STYLE_COLOUR('',#517768); +#529003 = OVER_RIDING_STYLED_ITEM('overriding color',(#529004),#53809, + #528987); +#529004 = PRESENTATION_STYLE_ASSIGNMENT((#529005)); +#529005 = SURFACE_STYLE_USAGE(.BOTH.,#529006); +#529006 = SURFACE_SIDE_STYLE('',(#529007)); +#529007 = SURFACE_STYLE_FILL_AREA(#529008); +#529008 = FILL_AREA_STYLE('',(#529009)); +#529009 = FILL_AREA_STYLE_COLOUR('',#517768); +#529010 = OVER_RIDING_STYLED_ITEM('overriding color',(#529011),#53840, + #528987); +#529011 = PRESENTATION_STYLE_ASSIGNMENT((#529012)); +#529012 = SURFACE_STYLE_USAGE(.BOTH.,#529013); +#529013 = SURFACE_SIDE_STYLE('',(#529014)); +#529014 = SURFACE_STYLE_FILL_AREA(#529015); +#529015 = FILL_AREA_STYLE('',(#529016)); +#529016 = FILL_AREA_STYLE_COLOUR('',#517768); +#529017 = OVER_RIDING_STYLED_ITEM('overriding color',(#529018),#53871, + #528987); +#529018 = PRESENTATION_STYLE_ASSIGNMENT((#529019)); +#529019 = SURFACE_STYLE_USAGE(.BOTH.,#529020); +#529020 = SURFACE_SIDE_STYLE('',(#529021)); +#529021 = SURFACE_STYLE_FILL_AREA(#529022); +#529022 = FILL_AREA_STYLE('',(#529023)); +#529023 = FILL_AREA_STYLE_COLOUR('',#517768); +#529024 = OVER_RIDING_STYLED_ITEM('overriding color',(#529025),#53921, + #528987); +#529025 = PRESENTATION_STYLE_ASSIGNMENT((#529026)); +#529026 = SURFACE_STYLE_USAGE(.BOTH.,#529027); +#529027 = SURFACE_SIDE_STYLE('',(#529028)); +#529028 = SURFACE_STYLE_FILL_AREA(#529029); +#529029 = FILL_AREA_STYLE('',(#529030)); +#529030 = FILL_AREA_STYLE_COLOUR('',#517768); +#529031 = OVER_RIDING_STYLED_ITEM('overriding color',(#529032),#53952, + #528987); +#529032 = PRESENTATION_STYLE_ASSIGNMENT((#529033)); +#529033 = SURFACE_STYLE_USAGE(.BOTH.,#529034); +#529034 = SURFACE_SIDE_STYLE('',(#529035)); +#529035 = SURFACE_STYLE_FILL_AREA(#529036); +#529036 = FILL_AREA_STYLE('',(#529037)); +#529037 = FILL_AREA_STYLE_COLOUR('',#517768); +#529038 = OVER_RIDING_STYLED_ITEM('overriding color',(#529039),#53985, + #528987); +#529039 = PRESENTATION_STYLE_ASSIGNMENT((#529040)); +#529040 = SURFACE_STYLE_USAGE(.BOTH.,#529041); +#529041 = SURFACE_SIDE_STYLE('',(#529042)); +#529042 = SURFACE_STYLE_FILL_AREA(#529043); +#529043 = FILL_AREA_STYLE('',(#529044)); +#529044 = FILL_AREA_STYLE_COLOUR('',#517768); +#529045 = OVER_RIDING_STYLED_ITEM('overriding color',(#529046),#54002, + #528987); +#529046 = PRESENTATION_STYLE_ASSIGNMENT((#529047)); +#529047 = SURFACE_STYLE_USAGE(.BOTH.,#529048); +#529048 = SURFACE_SIDE_STYLE('',(#529049)); +#529049 = SURFACE_STYLE_FILL_AREA(#529050); +#529050 = FILL_AREA_STYLE('',(#529051)); +#529051 = FILL_AREA_STYLE_COLOUR('',#517768); +#529052 = OVER_RIDING_STYLED_ITEM('overriding color',(#529053),#54026, + #528987); +#529053 = PRESENTATION_STYLE_ASSIGNMENT((#529054)); +#529054 = SURFACE_STYLE_USAGE(.BOTH.,#529055); +#529055 = SURFACE_SIDE_STYLE('',(#529056)); +#529056 = SURFACE_STYLE_FILL_AREA(#529057); +#529057 = FILL_AREA_STYLE('',(#529058)); +#529058 = FILL_AREA_STYLE_COLOUR('',#517768); +#529059 = OVER_RIDING_STYLED_ITEM('overriding color',(#529060),#54057, + #528987); +#529060 = PRESENTATION_STYLE_ASSIGNMENT((#529061)); +#529061 = SURFACE_STYLE_USAGE(.BOTH.,#529062); +#529062 = SURFACE_SIDE_STYLE('',(#529063)); +#529063 = SURFACE_STYLE_FILL_AREA(#529064); +#529064 = FILL_AREA_STYLE('',(#529065)); +#529065 = FILL_AREA_STYLE_COLOUR('',#517768); +#529066 = OVER_RIDING_STYLED_ITEM('overriding color',(#529067),#54074, + #528987); +#529067 = PRESENTATION_STYLE_ASSIGNMENT((#529068)); +#529068 = SURFACE_STYLE_USAGE(.BOTH.,#529069); +#529069 = SURFACE_SIDE_STYLE('',(#529070)); +#529070 = SURFACE_STYLE_FILL_AREA(#529071); +#529071 = FILL_AREA_STYLE('',(#529072)); +#529072 = FILL_AREA_STYLE_COLOUR('',#517768); +#529073 = OVER_RIDING_STYLED_ITEM('overriding color',(#529074),#54103, + #528987); +#529074 = PRESENTATION_STYLE_ASSIGNMENT((#529075)); +#529075 = SURFACE_STYLE_USAGE(.BOTH.,#529076); +#529076 = SURFACE_SIDE_STYLE('',(#529077)); +#529077 = SURFACE_STYLE_FILL_AREA(#529078); +#529078 = FILL_AREA_STYLE('',(#529079)); +#529079 = FILL_AREA_STYLE_COLOUR('',#517768); +#529080 = OVER_RIDING_STYLED_ITEM('overriding color',(#529081),#54127, + #528987); +#529081 = PRESENTATION_STYLE_ASSIGNMENT((#529082)); +#529082 = SURFACE_STYLE_USAGE(.BOTH.,#529083); +#529083 = SURFACE_SIDE_STYLE('',(#529084)); +#529084 = SURFACE_STYLE_FILL_AREA(#529085); +#529085 = FILL_AREA_STYLE('',(#529086)); +#529086 = FILL_AREA_STYLE_COLOUR('',#517768); +#529087 = OVER_RIDING_STYLED_ITEM('overriding color',(#529088),#54153, + #528987); +#529088 = PRESENTATION_STYLE_ASSIGNMENT((#529089)); +#529089 = SURFACE_STYLE_USAGE(.BOTH.,#529090); +#529090 = SURFACE_SIDE_STYLE('',(#529091)); +#529091 = SURFACE_STYLE_FILL_AREA(#529092); +#529092 = FILL_AREA_STYLE('',(#529093)); +#529093 = FILL_AREA_STYLE_COLOUR('',#517768); +#529094 = OVER_RIDING_STYLED_ITEM('overriding color',(#529095),#54177, + #528987); +#529095 = PRESENTATION_STYLE_ASSIGNMENT((#529096)); +#529096 = SURFACE_STYLE_USAGE(.BOTH.,#529097); +#529097 = SURFACE_SIDE_STYLE('',(#529098)); +#529098 = SURFACE_STYLE_FILL_AREA(#529099); +#529099 = FILL_AREA_STYLE('',(#529100)); +#529100 = FILL_AREA_STYLE_COLOUR('',#517768); +#529101 = OVER_RIDING_STYLED_ITEM('overriding color',(#529102),#54204, + #528987); +#529102 = PRESENTATION_STYLE_ASSIGNMENT((#529103)); +#529103 = SURFACE_STYLE_USAGE(.BOTH.,#529104); +#529104 = SURFACE_SIDE_STYLE('',(#529105)); +#529105 = SURFACE_STYLE_FILL_AREA(#529106); +#529106 = FILL_AREA_STYLE('',(#529107)); +#529107 = FILL_AREA_STYLE_COLOUR('',#517768); +#529108 = OVER_RIDING_STYLED_ITEM('overriding color',(#529109),#54216, + #528987); +#529109 = PRESENTATION_STYLE_ASSIGNMENT((#529110)); +#529110 = SURFACE_STYLE_USAGE(.BOTH.,#529111); +#529111 = SURFACE_SIDE_STYLE('',(#529112)); +#529112 = SURFACE_STYLE_FILL_AREA(#529113); +#529113 = FILL_AREA_STYLE('',(#529114)); +#529114 = FILL_AREA_STYLE_COLOUR('',#517768); +#529115 = OVER_RIDING_STYLED_ITEM('overriding color',(#529116),#54233, + #528987); +#529116 = PRESENTATION_STYLE_ASSIGNMENT((#529117)); +#529117 = SURFACE_STYLE_USAGE(.BOTH.,#529118); +#529118 = SURFACE_SIDE_STYLE('',(#529119)); +#529119 = SURFACE_STYLE_FILL_AREA(#529120); +#529120 = FILL_AREA_STYLE('',(#529121)); +#529121 = FILL_AREA_STYLE_COLOUR('',#517768); +#529122 = STYLED_ITEM('color',(#529123),#54245); +#529123 = PRESENTATION_STYLE_ASSIGNMENT((#529124,#529129)); +#529124 = SURFACE_STYLE_USAGE(.BOTH.,#529125); +#529125 = SURFACE_SIDE_STYLE('',(#529126)); +#529126 = SURFACE_STYLE_FILL_AREA(#529127); +#529127 = FILL_AREA_STYLE('',(#529128)); +#529128 = FILL_AREA_STYLE_COLOUR('',#523837); +#529129 = CURVE_STYLE('',#529130,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529130 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529131 = OVER_RIDING_STYLED_ITEM('overriding color',(#529132),#54247, + #529122); +#529132 = PRESENTATION_STYLE_ASSIGNMENT((#529133)); +#529133 = SURFACE_STYLE_USAGE(.BOTH.,#529134); +#529134 = SURFACE_SIDE_STYLE('',(#529135)); +#529135 = SURFACE_STYLE_FILL_AREA(#529136); +#529136 = FILL_AREA_STYLE('',(#529137)); +#529137 = FILL_AREA_STYLE_COLOUR('',#517768); +#529138 = OVER_RIDING_STYLED_ITEM('overriding color',(#529139),#54287, + #529122); +#529139 = PRESENTATION_STYLE_ASSIGNMENT((#529140)); +#529140 = SURFACE_STYLE_USAGE(.BOTH.,#529141); +#529141 = SURFACE_SIDE_STYLE('',(#529142)); +#529142 = SURFACE_STYLE_FILL_AREA(#529143); +#529143 = FILL_AREA_STYLE('',(#529144)); +#529144 = FILL_AREA_STYLE_COLOUR('',#517768); +#529145 = OVER_RIDING_STYLED_ITEM('overriding color',(#529146),#54318, + #529122); +#529146 = PRESENTATION_STYLE_ASSIGNMENT((#529147)); +#529147 = SURFACE_STYLE_USAGE(.BOTH.,#529148); +#529148 = SURFACE_SIDE_STYLE('',(#529149)); +#529149 = SURFACE_STYLE_FILL_AREA(#529150); +#529150 = FILL_AREA_STYLE('',(#529151)); +#529151 = FILL_AREA_STYLE_COLOUR('',#517768); +#529152 = OVER_RIDING_STYLED_ITEM('overriding color',(#529153),#54349, + #529122); +#529153 = PRESENTATION_STYLE_ASSIGNMENT((#529154)); +#529154 = SURFACE_STYLE_USAGE(.BOTH.,#529155); +#529155 = SURFACE_SIDE_STYLE('',(#529156)); +#529156 = SURFACE_STYLE_FILL_AREA(#529157); +#529157 = FILL_AREA_STYLE('',(#529158)); +#529158 = FILL_AREA_STYLE_COLOUR('',#517768); +#529159 = OVER_RIDING_STYLED_ITEM('overriding color',(#529160),#54399, + #529122); +#529160 = PRESENTATION_STYLE_ASSIGNMENT((#529161)); +#529161 = SURFACE_STYLE_USAGE(.BOTH.,#529162); +#529162 = SURFACE_SIDE_STYLE('',(#529163)); +#529163 = SURFACE_STYLE_FILL_AREA(#529164); +#529164 = FILL_AREA_STYLE('',(#529165)); +#529165 = FILL_AREA_STYLE_COLOUR('',#517768); +#529166 = OVER_RIDING_STYLED_ITEM('overriding color',(#529167),#54430, + #529122); +#529167 = PRESENTATION_STYLE_ASSIGNMENT((#529168)); +#529168 = SURFACE_STYLE_USAGE(.BOTH.,#529169); +#529169 = SURFACE_SIDE_STYLE('',(#529170)); +#529170 = SURFACE_STYLE_FILL_AREA(#529171); +#529171 = FILL_AREA_STYLE('',(#529172)); +#529172 = FILL_AREA_STYLE_COLOUR('',#517768); +#529173 = OVER_RIDING_STYLED_ITEM('overriding color',(#529174),#54463, + #529122); +#529174 = PRESENTATION_STYLE_ASSIGNMENT((#529175)); +#529175 = SURFACE_STYLE_USAGE(.BOTH.,#529176); +#529176 = SURFACE_SIDE_STYLE('',(#529177)); +#529177 = SURFACE_STYLE_FILL_AREA(#529178); +#529178 = FILL_AREA_STYLE('',(#529179)); +#529179 = FILL_AREA_STYLE_COLOUR('',#517768); +#529180 = OVER_RIDING_STYLED_ITEM('overriding color',(#529181),#54480, + #529122); +#529181 = PRESENTATION_STYLE_ASSIGNMENT((#529182)); +#529182 = SURFACE_STYLE_USAGE(.BOTH.,#529183); +#529183 = SURFACE_SIDE_STYLE('',(#529184)); +#529184 = SURFACE_STYLE_FILL_AREA(#529185); +#529185 = FILL_AREA_STYLE('',(#529186)); +#529186 = FILL_AREA_STYLE_COLOUR('',#517768); +#529187 = OVER_RIDING_STYLED_ITEM('overriding color',(#529188),#54504, + #529122); +#529188 = PRESENTATION_STYLE_ASSIGNMENT((#529189)); +#529189 = SURFACE_STYLE_USAGE(.BOTH.,#529190); +#529190 = SURFACE_SIDE_STYLE('',(#529191)); +#529191 = SURFACE_STYLE_FILL_AREA(#529192); +#529192 = FILL_AREA_STYLE('',(#529193)); +#529193 = FILL_AREA_STYLE_COLOUR('',#517768); +#529194 = OVER_RIDING_STYLED_ITEM('overriding color',(#529195),#54535, + #529122); +#529195 = PRESENTATION_STYLE_ASSIGNMENT((#529196)); +#529196 = SURFACE_STYLE_USAGE(.BOTH.,#529197); +#529197 = SURFACE_SIDE_STYLE('',(#529198)); +#529198 = SURFACE_STYLE_FILL_AREA(#529199); +#529199 = FILL_AREA_STYLE('',(#529200)); +#529200 = FILL_AREA_STYLE_COLOUR('',#517768); +#529201 = OVER_RIDING_STYLED_ITEM('overriding color',(#529202),#54552, + #529122); +#529202 = PRESENTATION_STYLE_ASSIGNMENT((#529203)); +#529203 = SURFACE_STYLE_USAGE(.BOTH.,#529204); +#529204 = SURFACE_SIDE_STYLE('',(#529205)); +#529205 = SURFACE_STYLE_FILL_AREA(#529206); +#529206 = FILL_AREA_STYLE('',(#529207)); +#529207 = FILL_AREA_STYLE_COLOUR('',#517768); +#529208 = OVER_RIDING_STYLED_ITEM('overriding color',(#529209),#54581, + #529122); +#529209 = PRESENTATION_STYLE_ASSIGNMENT((#529210)); +#529210 = SURFACE_STYLE_USAGE(.BOTH.,#529211); +#529211 = SURFACE_SIDE_STYLE('',(#529212)); +#529212 = SURFACE_STYLE_FILL_AREA(#529213); +#529213 = FILL_AREA_STYLE('',(#529214)); +#529214 = FILL_AREA_STYLE_COLOUR('',#517768); +#529215 = OVER_RIDING_STYLED_ITEM('overriding color',(#529216),#54605, + #529122); +#529216 = PRESENTATION_STYLE_ASSIGNMENT((#529217)); +#529217 = SURFACE_STYLE_USAGE(.BOTH.,#529218); +#529218 = SURFACE_SIDE_STYLE('',(#529219)); +#529219 = SURFACE_STYLE_FILL_AREA(#529220); +#529220 = FILL_AREA_STYLE('',(#529221)); +#529221 = FILL_AREA_STYLE_COLOUR('',#517768); +#529222 = OVER_RIDING_STYLED_ITEM('overriding color',(#529223),#54631, + #529122); +#529223 = PRESENTATION_STYLE_ASSIGNMENT((#529224)); +#529224 = SURFACE_STYLE_USAGE(.BOTH.,#529225); +#529225 = SURFACE_SIDE_STYLE('',(#529226)); +#529226 = SURFACE_STYLE_FILL_AREA(#529227); +#529227 = FILL_AREA_STYLE('',(#529228)); +#529228 = FILL_AREA_STYLE_COLOUR('',#517768); +#529229 = OVER_RIDING_STYLED_ITEM('overriding color',(#529230),#54655, + #529122); +#529230 = PRESENTATION_STYLE_ASSIGNMENT((#529231)); +#529231 = SURFACE_STYLE_USAGE(.BOTH.,#529232); +#529232 = SURFACE_SIDE_STYLE('',(#529233)); +#529233 = SURFACE_STYLE_FILL_AREA(#529234); +#529234 = FILL_AREA_STYLE('',(#529235)); +#529235 = FILL_AREA_STYLE_COLOUR('',#517768); +#529236 = OVER_RIDING_STYLED_ITEM('overriding color',(#529237),#54682, + #529122); +#529237 = PRESENTATION_STYLE_ASSIGNMENT((#529238)); +#529238 = SURFACE_STYLE_USAGE(.BOTH.,#529239); +#529239 = SURFACE_SIDE_STYLE('',(#529240)); +#529240 = SURFACE_STYLE_FILL_AREA(#529241); +#529241 = FILL_AREA_STYLE('',(#529242)); +#529242 = FILL_AREA_STYLE_COLOUR('',#517768); +#529243 = OVER_RIDING_STYLED_ITEM('overriding color',(#529244),#54694, + #529122); +#529244 = PRESENTATION_STYLE_ASSIGNMENT((#529245)); +#529245 = SURFACE_STYLE_USAGE(.BOTH.,#529246); +#529246 = SURFACE_SIDE_STYLE('',(#529247)); +#529247 = SURFACE_STYLE_FILL_AREA(#529248); +#529248 = FILL_AREA_STYLE('',(#529249)); +#529249 = FILL_AREA_STYLE_COLOUR('',#517768); +#529250 = OVER_RIDING_STYLED_ITEM('overriding color',(#529251),#54711, + #529122); +#529251 = PRESENTATION_STYLE_ASSIGNMENT((#529252)); +#529252 = SURFACE_STYLE_USAGE(.BOTH.,#529253); +#529253 = SURFACE_SIDE_STYLE('',(#529254)); +#529254 = SURFACE_STYLE_FILL_AREA(#529255); +#529255 = FILL_AREA_STYLE('',(#529256)); +#529256 = FILL_AREA_STYLE_COLOUR('',#517768); +#529257 = STYLED_ITEM('color',(#529258),#54723); +#529258 = PRESENTATION_STYLE_ASSIGNMENT((#529259,#529264)); +#529259 = SURFACE_STYLE_USAGE(.BOTH.,#529260); +#529260 = SURFACE_SIDE_STYLE('',(#529261)); +#529261 = SURFACE_STYLE_FILL_AREA(#529262); +#529262 = FILL_AREA_STYLE('',(#529263)); +#529263 = FILL_AREA_STYLE_COLOUR('',#523837); +#529264 = CURVE_STYLE('',#529265,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529265 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529266 = OVER_RIDING_STYLED_ITEM('overriding color',(#529267),#54725, + #529257); +#529267 = PRESENTATION_STYLE_ASSIGNMENT((#529268)); +#529268 = SURFACE_STYLE_USAGE(.BOTH.,#529269); +#529269 = SURFACE_SIDE_STYLE('',(#529270)); +#529270 = SURFACE_STYLE_FILL_AREA(#529271); +#529271 = FILL_AREA_STYLE('',(#529272)); +#529272 = FILL_AREA_STYLE_COLOUR('',#517768); +#529273 = OVER_RIDING_STYLED_ITEM('overriding color',(#529274),#54765, + #529257); +#529274 = PRESENTATION_STYLE_ASSIGNMENT((#529275)); +#529275 = SURFACE_STYLE_USAGE(.BOTH.,#529276); +#529276 = SURFACE_SIDE_STYLE('',(#529277)); +#529277 = SURFACE_STYLE_FILL_AREA(#529278); +#529278 = FILL_AREA_STYLE('',(#529279)); +#529279 = FILL_AREA_STYLE_COLOUR('',#517768); +#529280 = OVER_RIDING_STYLED_ITEM('overriding color',(#529281),#54796, + #529257); +#529281 = PRESENTATION_STYLE_ASSIGNMENT((#529282)); +#529282 = SURFACE_STYLE_USAGE(.BOTH.,#529283); +#529283 = SURFACE_SIDE_STYLE('',(#529284)); +#529284 = SURFACE_STYLE_FILL_AREA(#529285); +#529285 = FILL_AREA_STYLE('',(#529286)); +#529286 = FILL_AREA_STYLE_COLOUR('',#517768); +#529287 = OVER_RIDING_STYLED_ITEM('overriding color',(#529288),#54827, + #529257); +#529288 = PRESENTATION_STYLE_ASSIGNMENT((#529289)); +#529289 = SURFACE_STYLE_USAGE(.BOTH.,#529290); +#529290 = SURFACE_SIDE_STYLE('',(#529291)); +#529291 = SURFACE_STYLE_FILL_AREA(#529292); +#529292 = FILL_AREA_STYLE('',(#529293)); +#529293 = FILL_AREA_STYLE_COLOUR('',#517768); +#529294 = OVER_RIDING_STYLED_ITEM('overriding color',(#529295),#54877, + #529257); +#529295 = PRESENTATION_STYLE_ASSIGNMENT((#529296)); +#529296 = SURFACE_STYLE_USAGE(.BOTH.,#529297); +#529297 = SURFACE_SIDE_STYLE('',(#529298)); +#529298 = SURFACE_STYLE_FILL_AREA(#529299); +#529299 = FILL_AREA_STYLE('',(#529300)); +#529300 = FILL_AREA_STYLE_COLOUR('',#517768); +#529301 = OVER_RIDING_STYLED_ITEM('overriding color',(#529302),#54908, + #529257); +#529302 = PRESENTATION_STYLE_ASSIGNMENT((#529303)); +#529303 = SURFACE_STYLE_USAGE(.BOTH.,#529304); +#529304 = SURFACE_SIDE_STYLE('',(#529305)); +#529305 = SURFACE_STYLE_FILL_AREA(#529306); +#529306 = FILL_AREA_STYLE('',(#529307)); +#529307 = FILL_AREA_STYLE_COLOUR('',#517768); +#529308 = OVER_RIDING_STYLED_ITEM('overriding color',(#529309),#54941, + #529257); +#529309 = PRESENTATION_STYLE_ASSIGNMENT((#529310)); +#529310 = SURFACE_STYLE_USAGE(.BOTH.,#529311); +#529311 = SURFACE_SIDE_STYLE('',(#529312)); +#529312 = SURFACE_STYLE_FILL_AREA(#529313); +#529313 = FILL_AREA_STYLE('',(#529314)); +#529314 = FILL_AREA_STYLE_COLOUR('',#517768); +#529315 = OVER_RIDING_STYLED_ITEM('overriding color',(#529316),#54958, + #529257); +#529316 = PRESENTATION_STYLE_ASSIGNMENT((#529317)); +#529317 = SURFACE_STYLE_USAGE(.BOTH.,#529318); +#529318 = SURFACE_SIDE_STYLE('',(#529319)); +#529319 = SURFACE_STYLE_FILL_AREA(#529320); +#529320 = FILL_AREA_STYLE('',(#529321)); +#529321 = FILL_AREA_STYLE_COLOUR('',#517768); +#529322 = OVER_RIDING_STYLED_ITEM('overriding color',(#529323),#54982, + #529257); +#529323 = PRESENTATION_STYLE_ASSIGNMENT((#529324)); +#529324 = SURFACE_STYLE_USAGE(.BOTH.,#529325); +#529325 = SURFACE_SIDE_STYLE('',(#529326)); +#529326 = SURFACE_STYLE_FILL_AREA(#529327); +#529327 = FILL_AREA_STYLE('',(#529328)); +#529328 = FILL_AREA_STYLE_COLOUR('',#517768); +#529329 = OVER_RIDING_STYLED_ITEM('overriding color',(#529330),#55013, + #529257); +#529330 = PRESENTATION_STYLE_ASSIGNMENT((#529331)); +#529331 = SURFACE_STYLE_USAGE(.BOTH.,#529332); +#529332 = SURFACE_SIDE_STYLE('',(#529333)); +#529333 = SURFACE_STYLE_FILL_AREA(#529334); +#529334 = FILL_AREA_STYLE('',(#529335)); +#529335 = FILL_AREA_STYLE_COLOUR('',#517768); +#529336 = OVER_RIDING_STYLED_ITEM('overriding color',(#529337),#55030, + #529257); +#529337 = PRESENTATION_STYLE_ASSIGNMENT((#529338)); +#529338 = SURFACE_STYLE_USAGE(.BOTH.,#529339); +#529339 = SURFACE_SIDE_STYLE('',(#529340)); +#529340 = SURFACE_STYLE_FILL_AREA(#529341); +#529341 = FILL_AREA_STYLE('',(#529342)); +#529342 = FILL_AREA_STYLE_COLOUR('',#517768); +#529343 = OVER_RIDING_STYLED_ITEM('overriding color',(#529344),#55059, + #529257); +#529344 = PRESENTATION_STYLE_ASSIGNMENT((#529345)); +#529345 = SURFACE_STYLE_USAGE(.BOTH.,#529346); +#529346 = SURFACE_SIDE_STYLE('',(#529347)); +#529347 = SURFACE_STYLE_FILL_AREA(#529348); +#529348 = FILL_AREA_STYLE('',(#529349)); +#529349 = FILL_AREA_STYLE_COLOUR('',#517768); +#529350 = OVER_RIDING_STYLED_ITEM('overriding color',(#529351),#55083, + #529257); +#529351 = PRESENTATION_STYLE_ASSIGNMENT((#529352)); +#529352 = SURFACE_STYLE_USAGE(.BOTH.,#529353); +#529353 = SURFACE_SIDE_STYLE('',(#529354)); +#529354 = SURFACE_STYLE_FILL_AREA(#529355); +#529355 = FILL_AREA_STYLE('',(#529356)); +#529356 = FILL_AREA_STYLE_COLOUR('',#517768); +#529357 = OVER_RIDING_STYLED_ITEM('overriding color',(#529358),#55109, + #529257); +#529358 = PRESENTATION_STYLE_ASSIGNMENT((#529359)); +#529359 = SURFACE_STYLE_USAGE(.BOTH.,#529360); +#529360 = SURFACE_SIDE_STYLE('',(#529361)); +#529361 = SURFACE_STYLE_FILL_AREA(#529362); +#529362 = FILL_AREA_STYLE('',(#529363)); +#529363 = FILL_AREA_STYLE_COLOUR('',#517768); +#529364 = OVER_RIDING_STYLED_ITEM('overriding color',(#529365),#55133, + #529257); +#529365 = PRESENTATION_STYLE_ASSIGNMENT((#529366)); +#529366 = SURFACE_STYLE_USAGE(.BOTH.,#529367); +#529367 = SURFACE_SIDE_STYLE('',(#529368)); +#529368 = SURFACE_STYLE_FILL_AREA(#529369); +#529369 = FILL_AREA_STYLE('',(#529370)); +#529370 = FILL_AREA_STYLE_COLOUR('',#517768); +#529371 = OVER_RIDING_STYLED_ITEM('overriding color',(#529372),#55160, + #529257); +#529372 = PRESENTATION_STYLE_ASSIGNMENT((#529373)); +#529373 = SURFACE_STYLE_USAGE(.BOTH.,#529374); +#529374 = SURFACE_SIDE_STYLE('',(#529375)); +#529375 = SURFACE_STYLE_FILL_AREA(#529376); +#529376 = FILL_AREA_STYLE('',(#529377)); +#529377 = FILL_AREA_STYLE_COLOUR('',#517768); +#529378 = OVER_RIDING_STYLED_ITEM('overriding color',(#529379),#55172, + #529257); +#529379 = PRESENTATION_STYLE_ASSIGNMENT((#529380)); +#529380 = SURFACE_STYLE_USAGE(.BOTH.,#529381); +#529381 = SURFACE_SIDE_STYLE('',(#529382)); +#529382 = SURFACE_STYLE_FILL_AREA(#529383); +#529383 = FILL_AREA_STYLE('',(#529384)); +#529384 = FILL_AREA_STYLE_COLOUR('',#517768); +#529385 = OVER_RIDING_STYLED_ITEM('overriding color',(#529386),#55189, + #529257); +#529386 = PRESENTATION_STYLE_ASSIGNMENT((#529387)); +#529387 = SURFACE_STYLE_USAGE(.BOTH.,#529388); +#529388 = SURFACE_SIDE_STYLE('',(#529389)); +#529389 = SURFACE_STYLE_FILL_AREA(#529390); +#529390 = FILL_AREA_STYLE('',(#529391)); +#529391 = FILL_AREA_STYLE_COLOUR('',#517768); +#529392 = STYLED_ITEM('color',(#529393),#55201); +#529393 = PRESENTATION_STYLE_ASSIGNMENT((#529394,#529399)); +#529394 = SURFACE_STYLE_USAGE(.BOTH.,#529395); +#529395 = SURFACE_SIDE_STYLE('',(#529396)); +#529396 = SURFACE_STYLE_FILL_AREA(#529397); +#529397 = FILL_AREA_STYLE('',(#529398)); +#529398 = FILL_AREA_STYLE_COLOUR('',#523837); +#529399 = CURVE_STYLE('',#529400,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529400 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529401 = OVER_RIDING_STYLED_ITEM('overriding color',(#529402),#55203, + #529392); +#529402 = PRESENTATION_STYLE_ASSIGNMENT((#529403)); +#529403 = SURFACE_STYLE_USAGE(.BOTH.,#529404); +#529404 = SURFACE_SIDE_STYLE('',(#529405)); +#529405 = SURFACE_STYLE_FILL_AREA(#529406); +#529406 = FILL_AREA_STYLE('',(#529407)); +#529407 = FILL_AREA_STYLE_COLOUR('',#517768); +#529408 = OVER_RIDING_STYLED_ITEM('overriding color',(#529409),#55243, + #529392); +#529409 = PRESENTATION_STYLE_ASSIGNMENT((#529410)); +#529410 = SURFACE_STYLE_USAGE(.BOTH.,#529411); +#529411 = SURFACE_SIDE_STYLE('',(#529412)); +#529412 = SURFACE_STYLE_FILL_AREA(#529413); +#529413 = FILL_AREA_STYLE('',(#529414)); +#529414 = FILL_AREA_STYLE_COLOUR('',#517768); +#529415 = OVER_RIDING_STYLED_ITEM('overriding color',(#529416),#55274, + #529392); +#529416 = PRESENTATION_STYLE_ASSIGNMENT((#529417)); +#529417 = SURFACE_STYLE_USAGE(.BOTH.,#529418); +#529418 = SURFACE_SIDE_STYLE('',(#529419)); +#529419 = SURFACE_STYLE_FILL_AREA(#529420); +#529420 = FILL_AREA_STYLE('',(#529421)); +#529421 = FILL_AREA_STYLE_COLOUR('',#517768); +#529422 = OVER_RIDING_STYLED_ITEM('overriding color',(#529423),#55305, + #529392); +#529423 = PRESENTATION_STYLE_ASSIGNMENT((#529424)); +#529424 = SURFACE_STYLE_USAGE(.BOTH.,#529425); +#529425 = SURFACE_SIDE_STYLE('',(#529426)); +#529426 = SURFACE_STYLE_FILL_AREA(#529427); +#529427 = FILL_AREA_STYLE('',(#529428)); +#529428 = FILL_AREA_STYLE_COLOUR('',#517768); +#529429 = OVER_RIDING_STYLED_ITEM('overriding color',(#529430),#55355, + #529392); +#529430 = PRESENTATION_STYLE_ASSIGNMENT((#529431)); +#529431 = SURFACE_STYLE_USAGE(.BOTH.,#529432); +#529432 = SURFACE_SIDE_STYLE('',(#529433)); +#529433 = SURFACE_STYLE_FILL_AREA(#529434); +#529434 = FILL_AREA_STYLE('',(#529435)); +#529435 = FILL_AREA_STYLE_COLOUR('',#517768); +#529436 = OVER_RIDING_STYLED_ITEM('overriding color',(#529437),#55386, + #529392); +#529437 = PRESENTATION_STYLE_ASSIGNMENT((#529438)); +#529438 = SURFACE_STYLE_USAGE(.BOTH.,#529439); +#529439 = SURFACE_SIDE_STYLE('',(#529440)); +#529440 = SURFACE_STYLE_FILL_AREA(#529441); +#529441 = FILL_AREA_STYLE('',(#529442)); +#529442 = FILL_AREA_STYLE_COLOUR('',#517768); +#529443 = OVER_RIDING_STYLED_ITEM('overriding color',(#529444),#55419, + #529392); +#529444 = PRESENTATION_STYLE_ASSIGNMENT((#529445)); +#529445 = SURFACE_STYLE_USAGE(.BOTH.,#529446); +#529446 = SURFACE_SIDE_STYLE('',(#529447)); +#529447 = SURFACE_STYLE_FILL_AREA(#529448); +#529448 = FILL_AREA_STYLE('',(#529449)); +#529449 = FILL_AREA_STYLE_COLOUR('',#517768); +#529450 = OVER_RIDING_STYLED_ITEM('overriding color',(#529451),#55436, + #529392); +#529451 = PRESENTATION_STYLE_ASSIGNMENT((#529452)); +#529452 = SURFACE_STYLE_USAGE(.BOTH.,#529453); +#529453 = SURFACE_SIDE_STYLE('',(#529454)); +#529454 = SURFACE_STYLE_FILL_AREA(#529455); +#529455 = FILL_AREA_STYLE('',(#529456)); +#529456 = FILL_AREA_STYLE_COLOUR('',#517768); +#529457 = OVER_RIDING_STYLED_ITEM('overriding color',(#529458),#55460, + #529392); +#529458 = PRESENTATION_STYLE_ASSIGNMENT((#529459)); +#529459 = SURFACE_STYLE_USAGE(.BOTH.,#529460); +#529460 = SURFACE_SIDE_STYLE('',(#529461)); +#529461 = SURFACE_STYLE_FILL_AREA(#529462); +#529462 = FILL_AREA_STYLE('',(#529463)); +#529463 = FILL_AREA_STYLE_COLOUR('',#517768); +#529464 = OVER_RIDING_STYLED_ITEM('overriding color',(#529465),#55491, + #529392); +#529465 = PRESENTATION_STYLE_ASSIGNMENT((#529466)); +#529466 = SURFACE_STYLE_USAGE(.BOTH.,#529467); +#529467 = SURFACE_SIDE_STYLE('',(#529468)); +#529468 = SURFACE_STYLE_FILL_AREA(#529469); +#529469 = FILL_AREA_STYLE('',(#529470)); +#529470 = FILL_AREA_STYLE_COLOUR('',#517768); +#529471 = OVER_RIDING_STYLED_ITEM('overriding color',(#529472),#55508, + #529392); +#529472 = PRESENTATION_STYLE_ASSIGNMENT((#529473)); +#529473 = SURFACE_STYLE_USAGE(.BOTH.,#529474); +#529474 = SURFACE_SIDE_STYLE('',(#529475)); +#529475 = SURFACE_STYLE_FILL_AREA(#529476); +#529476 = FILL_AREA_STYLE('',(#529477)); +#529477 = FILL_AREA_STYLE_COLOUR('',#517768); +#529478 = OVER_RIDING_STYLED_ITEM('overriding color',(#529479),#55537, + #529392); +#529479 = PRESENTATION_STYLE_ASSIGNMENT((#529480)); +#529480 = SURFACE_STYLE_USAGE(.BOTH.,#529481); +#529481 = SURFACE_SIDE_STYLE('',(#529482)); +#529482 = SURFACE_STYLE_FILL_AREA(#529483); +#529483 = FILL_AREA_STYLE('',(#529484)); +#529484 = FILL_AREA_STYLE_COLOUR('',#517768); +#529485 = OVER_RIDING_STYLED_ITEM('overriding color',(#529486),#55561, + #529392); +#529486 = PRESENTATION_STYLE_ASSIGNMENT((#529487)); +#529487 = SURFACE_STYLE_USAGE(.BOTH.,#529488); +#529488 = SURFACE_SIDE_STYLE('',(#529489)); +#529489 = SURFACE_STYLE_FILL_AREA(#529490); +#529490 = FILL_AREA_STYLE('',(#529491)); +#529491 = FILL_AREA_STYLE_COLOUR('',#517768); +#529492 = OVER_RIDING_STYLED_ITEM('overriding color',(#529493),#55587, + #529392); +#529493 = PRESENTATION_STYLE_ASSIGNMENT((#529494)); +#529494 = SURFACE_STYLE_USAGE(.BOTH.,#529495); +#529495 = SURFACE_SIDE_STYLE('',(#529496)); +#529496 = SURFACE_STYLE_FILL_AREA(#529497); +#529497 = FILL_AREA_STYLE('',(#529498)); +#529498 = FILL_AREA_STYLE_COLOUR('',#517768); +#529499 = OVER_RIDING_STYLED_ITEM('overriding color',(#529500),#55611, + #529392); +#529500 = PRESENTATION_STYLE_ASSIGNMENT((#529501)); +#529501 = SURFACE_STYLE_USAGE(.BOTH.,#529502); +#529502 = SURFACE_SIDE_STYLE('',(#529503)); +#529503 = SURFACE_STYLE_FILL_AREA(#529504); +#529504 = FILL_AREA_STYLE('',(#529505)); +#529505 = FILL_AREA_STYLE_COLOUR('',#517768); +#529506 = OVER_RIDING_STYLED_ITEM('overriding color',(#529507),#55638, + #529392); +#529507 = PRESENTATION_STYLE_ASSIGNMENT((#529508)); +#529508 = SURFACE_STYLE_USAGE(.BOTH.,#529509); +#529509 = SURFACE_SIDE_STYLE('',(#529510)); +#529510 = SURFACE_STYLE_FILL_AREA(#529511); +#529511 = FILL_AREA_STYLE('',(#529512)); +#529512 = FILL_AREA_STYLE_COLOUR('',#517768); +#529513 = OVER_RIDING_STYLED_ITEM('overriding color',(#529514),#55650, + #529392); +#529514 = PRESENTATION_STYLE_ASSIGNMENT((#529515)); +#529515 = SURFACE_STYLE_USAGE(.BOTH.,#529516); +#529516 = SURFACE_SIDE_STYLE('',(#529517)); +#529517 = SURFACE_STYLE_FILL_AREA(#529518); +#529518 = FILL_AREA_STYLE('',(#529519)); +#529519 = FILL_AREA_STYLE_COLOUR('',#517768); +#529520 = OVER_RIDING_STYLED_ITEM('overriding color',(#529521),#55667, + #529392); +#529521 = PRESENTATION_STYLE_ASSIGNMENT((#529522)); +#529522 = SURFACE_STYLE_USAGE(.BOTH.,#529523); +#529523 = SURFACE_SIDE_STYLE('',(#529524)); +#529524 = SURFACE_STYLE_FILL_AREA(#529525); +#529525 = FILL_AREA_STYLE('',(#529526)); +#529526 = FILL_AREA_STYLE_COLOUR('',#517768); +#529527 = STYLED_ITEM('color',(#529528),#55679); +#529528 = PRESENTATION_STYLE_ASSIGNMENT((#529529,#529534)); +#529529 = SURFACE_STYLE_USAGE(.BOTH.,#529530); +#529530 = SURFACE_SIDE_STYLE('',(#529531)); +#529531 = SURFACE_STYLE_FILL_AREA(#529532); +#529532 = FILL_AREA_STYLE('',(#529533)); +#529533 = FILL_AREA_STYLE_COLOUR('',#523837); +#529534 = CURVE_STYLE('',#529535,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529535 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529536 = OVER_RIDING_STYLED_ITEM('overriding color',(#529537),#55681, + #529527); +#529537 = PRESENTATION_STYLE_ASSIGNMENT((#529538)); +#529538 = SURFACE_STYLE_USAGE(.BOTH.,#529539); +#529539 = SURFACE_SIDE_STYLE('',(#529540)); +#529540 = SURFACE_STYLE_FILL_AREA(#529541); +#529541 = FILL_AREA_STYLE('',(#529542)); +#529542 = FILL_AREA_STYLE_COLOUR('',#517768); +#529543 = OVER_RIDING_STYLED_ITEM('overriding color',(#529544),#55721, + #529527); +#529544 = PRESENTATION_STYLE_ASSIGNMENT((#529545)); +#529545 = SURFACE_STYLE_USAGE(.BOTH.,#529546); +#529546 = SURFACE_SIDE_STYLE('',(#529547)); +#529547 = SURFACE_STYLE_FILL_AREA(#529548); +#529548 = FILL_AREA_STYLE('',(#529549)); +#529549 = FILL_AREA_STYLE_COLOUR('',#517768); +#529550 = OVER_RIDING_STYLED_ITEM('overriding color',(#529551),#55752, + #529527); +#529551 = PRESENTATION_STYLE_ASSIGNMENT((#529552)); +#529552 = SURFACE_STYLE_USAGE(.BOTH.,#529553); +#529553 = SURFACE_SIDE_STYLE('',(#529554)); +#529554 = SURFACE_STYLE_FILL_AREA(#529555); +#529555 = FILL_AREA_STYLE('',(#529556)); +#529556 = FILL_AREA_STYLE_COLOUR('',#517768); +#529557 = OVER_RIDING_STYLED_ITEM('overriding color',(#529558),#55783, + #529527); +#529558 = PRESENTATION_STYLE_ASSIGNMENT((#529559)); +#529559 = SURFACE_STYLE_USAGE(.BOTH.,#529560); +#529560 = SURFACE_SIDE_STYLE('',(#529561)); +#529561 = SURFACE_STYLE_FILL_AREA(#529562); +#529562 = FILL_AREA_STYLE('',(#529563)); +#529563 = FILL_AREA_STYLE_COLOUR('',#517768); +#529564 = OVER_RIDING_STYLED_ITEM('overriding color',(#529565),#55833, + #529527); +#529565 = PRESENTATION_STYLE_ASSIGNMENT((#529566)); +#529566 = SURFACE_STYLE_USAGE(.BOTH.,#529567); +#529567 = SURFACE_SIDE_STYLE('',(#529568)); +#529568 = SURFACE_STYLE_FILL_AREA(#529569); +#529569 = FILL_AREA_STYLE('',(#529570)); +#529570 = FILL_AREA_STYLE_COLOUR('',#517768); +#529571 = OVER_RIDING_STYLED_ITEM('overriding color',(#529572),#55864, + #529527); +#529572 = PRESENTATION_STYLE_ASSIGNMENT((#529573)); +#529573 = SURFACE_STYLE_USAGE(.BOTH.,#529574); +#529574 = SURFACE_SIDE_STYLE('',(#529575)); +#529575 = SURFACE_STYLE_FILL_AREA(#529576); +#529576 = FILL_AREA_STYLE('',(#529577)); +#529577 = FILL_AREA_STYLE_COLOUR('',#517768); +#529578 = OVER_RIDING_STYLED_ITEM('overriding color',(#529579),#55897, + #529527); +#529579 = PRESENTATION_STYLE_ASSIGNMENT((#529580)); +#529580 = SURFACE_STYLE_USAGE(.BOTH.,#529581); +#529581 = SURFACE_SIDE_STYLE('',(#529582)); +#529582 = SURFACE_STYLE_FILL_AREA(#529583); +#529583 = FILL_AREA_STYLE('',(#529584)); +#529584 = FILL_AREA_STYLE_COLOUR('',#517768); +#529585 = OVER_RIDING_STYLED_ITEM('overriding color',(#529586),#55914, + #529527); +#529586 = PRESENTATION_STYLE_ASSIGNMENT((#529587)); +#529587 = SURFACE_STYLE_USAGE(.BOTH.,#529588); +#529588 = SURFACE_SIDE_STYLE('',(#529589)); +#529589 = SURFACE_STYLE_FILL_AREA(#529590); +#529590 = FILL_AREA_STYLE('',(#529591)); +#529591 = FILL_AREA_STYLE_COLOUR('',#517768); +#529592 = OVER_RIDING_STYLED_ITEM('overriding color',(#529593),#55938, + #529527); +#529593 = PRESENTATION_STYLE_ASSIGNMENT((#529594)); +#529594 = SURFACE_STYLE_USAGE(.BOTH.,#529595); +#529595 = SURFACE_SIDE_STYLE('',(#529596)); +#529596 = SURFACE_STYLE_FILL_AREA(#529597); +#529597 = FILL_AREA_STYLE('',(#529598)); +#529598 = FILL_AREA_STYLE_COLOUR('',#517768); +#529599 = OVER_RIDING_STYLED_ITEM('overriding color',(#529600),#55969, + #529527); +#529600 = PRESENTATION_STYLE_ASSIGNMENT((#529601)); +#529601 = SURFACE_STYLE_USAGE(.BOTH.,#529602); +#529602 = SURFACE_SIDE_STYLE('',(#529603)); +#529603 = SURFACE_STYLE_FILL_AREA(#529604); +#529604 = FILL_AREA_STYLE('',(#529605)); +#529605 = FILL_AREA_STYLE_COLOUR('',#517768); +#529606 = OVER_RIDING_STYLED_ITEM('overriding color',(#529607),#55986, + #529527); +#529607 = PRESENTATION_STYLE_ASSIGNMENT((#529608)); +#529608 = SURFACE_STYLE_USAGE(.BOTH.,#529609); +#529609 = SURFACE_SIDE_STYLE('',(#529610)); +#529610 = SURFACE_STYLE_FILL_AREA(#529611); +#529611 = FILL_AREA_STYLE('',(#529612)); +#529612 = FILL_AREA_STYLE_COLOUR('',#517768); +#529613 = OVER_RIDING_STYLED_ITEM('overriding color',(#529614),#56015, + #529527); +#529614 = PRESENTATION_STYLE_ASSIGNMENT((#529615)); +#529615 = SURFACE_STYLE_USAGE(.BOTH.,#529616); +#529616 = SURFACE_SIDE_STYLE('',(#529617)); +#529617 = SURFACE_STYLE_FILL_AREA(#529618); +#529618 = FILL_AREA_STYLE('',(#529619)); +#529619 = FILL_AREA_STYLE_COLOUR('',#517768); +#529620 = OVER_RIDING_STYLED_ITEM('overriding color',(#529621),#56039, + #529527); +#529621 = PRESENTATION_STYLE_ASSIGNMENT((#529622)); +#529622 = SURFACE_STYLE_USAGE(.BOTH.,#529623); +#529623 = SURFACE_SIDE_STYLE('',(#529624)); +#529624 = SURFACE_STYLE_FILL_AREA(#529625); +#529625 = FILL_AREA_STYLE('',(#529626)); +#529626 = FILL_AREA_STYLE_COLOUR('',#517768); +#529627 = OVER_RIDING_STYLED_ITEM('overriding color',(#529628),#56065, + #529527); +#529628 = PRESENTATION_STYLE_ASSIGNMENT((#529629)); +#529629 = SURFACE_STYLE_USAGE(.BOTH.,#529630); +#529630 = SURFACE_SIDE_STYLE('',(#529631)); +#529631 = SURFACE_STYLE_FILL_AREA(#529632); +#529632 = FILL_AREA_STYLE('',(#529633)); +#529633 = FILL_AREA_STYLE_COLOUR('',#517768); +#529634 = OVER_RIDING_STYLED_ITEM('overriding color',(#529635),#56089, + #529527); +#529635 = PRESENTATION_STYLE_ASSIGNMENT((#529636)); +#529636 = SURFACE_STYLE_USAGE(.BOTH.,#529637); +#529637 = SURFACE_SIDE_STYLE('',(#529638)); +#529638 = SURFACE_STYLE_FILL_AREA(#529639); +#529639 = FILL_AREA_STYLE('',(#529640)); +#529640 = FILL_AREA_STYLE_COLOUR('',#517768); +#529641 = OVER_RIDING_STYLED_ITEM('overriding color',(#529642),#56116, + #529527); +#529642 = PRESENTATION_STYLE_ASSIGNMENT((#529643)); +#529643 = SURFACE_STYLE_USAGE(.BOTH.,#529644); +#529644 = SURFACE_SIDE_STYLE('',(#529645)); +#529645 = SURFACE_STYLE_FILL_AREA(#529646); +#529646 = FILL_AREA_STYLE('',(#529647)); +#529647 = FILL_AREA_STYLE_COLOUR('',#517768); +#529648 = OVER_RIDING_STYLED_ITEM('overriding color',(#529649),#56128, + #529527); +#529649 = PRESENTATION_STYLE_ASSIGNMENT((#529650)); +#529650 = SURFACE_STYLE_USAGE(.BOTH.,#529651); +#529651 = SURFACE_SIDE_STYLE('',(#529652)); +#529652 = SURFACE_STYLE_FILL_AREA(#529653); +#529653 = FILL_AREA_STYLE('',(#529654)); +#529654 = FILL_AREA_STYLE_COLOUR('',#517768); +#529655 = OVER_RIDING_STYLED_ITEM('overriding color',(#529656),#56145, + #529527); +#529656 = PRESENTATION_STYLE_ASSIGNMENT((#529657)); +#529657 = SURFACE_STYLE_USAGE(.BOTH.,#529658); +#529658 = SURFACE_SIDE_STYLE('',(#529659)); +#529659 = SURFACE_STYLE_FILL_AREA(#529660); +#529660 = FILL_AREA_STYLE('',(#529661)); +#529661 = FILL_AREA_STYLE_COLOUR('',#517768); +#529662 = STYLED_ITEM('color',(#529663),#56157); +#529663 = PRESENTATION_STYLE_ASSIGNMENT((#529664,#529669)); +#529664 = SURFACE_STYLE_USAGE(.BOTH.,#529665); +#529665 = SURFACE_SIDE_STYLE('',(#529666)); +#529666 = SURFACE_STYLE_FILL_AREA(#529667); +#529667 = FILL_AREA_STYLE('',(#529668)); +#529668 = FILL_AREA_STYLE_COLOUR('',#523837); +#529669 = CURVE_STYLE('',#529670,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529670 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529671 = OVER_RIDING_STYLED_ITEM('overriding color',(#529672),#56159, + #529662); +#529672 = PRESENTATION_STYLE_ASSIGNMENT((#529673)); +#529673 = SURFACE_STYLE_USAGE(.BOTH.,#529674); +#529674 = SURFACE_SIDE_STYLE('',(#529675)); +#529675 = SURFACE_STYLE_FILL_AREA(#529676); +#529676 = FILL_AREA_STYLE('',(#529677)); +#529677 = FILL_AREA_STYLE_COLOUR('',#517768); +#529678 = OVER_RIDING_STYLED_ITEM('overriding color',(#529679),#56199, + #529662); +#529679 = PRESENTATION_STYLE_ASSIGNMENT((#529680)); +#529680 = SURFACE_STYLE_USAGE(.BOTH.,#529681); +#529681 = SURFACE_SIDE_STYLE('',(#529682)); +#529682 = SURFACE_STYLE_FILL_AREA(#529683); +#529683 = FILL_AREA_STYLE('',(#529684)); +#529684 = FILL_AREA_STYLE_COLOUR('',#517768); +#529685 = OVER_RIDING_STYLED_ITEM('overriding color',(#529686),#56230, + #529662); +#529686 = PRESENTATION_STYLE_ASSIGNMENT((#529687)); +#529687 = SURFACE_STYLE_USAGE(.BOTH.,#529688); +#529688 = SURFACE_SIDE_STYLE('',(#529689)); +#529689 = SURFACE_STYLE_FILL_AREA(#529690); +#529690 = FILL_AREA_STYLE('',(#529691)); +#529691 = FILL_AREA_STYLE_COLOUR('',#517768); +#529692 = OVER_RIDING_STYLED_ITEM('overriding color',(#529693),#56261, + #529662); +#529693 = PRESENTATION_STYLE_ASSIGNMENT((#529694)); +#529694 = SURFACE_STYLE_USAGE(.BOTH.,#529695); +#529695 = SURFACE_SIDE_STYLE('',(#529696)); +#529696 = SURFACE_STYLE_FILL_AREA(#529697); +#529697 = FILL_AREA_STYLE('',(#529698)); +#529698 = FILL_AREA_STYLE_COLOUR('',#517768); +#529699 = OVER_RIDING_STYLED_ITEM('overriding color',(#529700),#56311, + #529662); +#529700 = PRESENTATION_STYLE_ASSIGNMENT((#529701)); +#529701 = SURFACE_STYLE_USAGE(.BOTH.,#529702); +#529702 = SURFACE_SIDE_STYLE('',(#529703)); +#529703 = SURFACE_STYLE_FILL_AREA(#529704); +#529704 = FILL_AREA_STYLE('',(#529705)); +#529705 = FILL_AREA_STYLE_COLOUR('',#517768); +#529706 = OVER_RIDING_STYLED_ITEM('overriding color',(#529707),#56342, + #529662); +#529707 = PRESENTATION_STYLE_ASSIGNMENT((#529708)); +#529708 = SURFACE_STYLE_USAGE(.BOTH.,#529709); +#529709 = SURFACE_SIDE_STYLE('',(#529710)); +#529710 = SURFACE_STYLE_FILL_AREA(#529711); +#529711 = FILL_AREA_STYLE('',(#529712)); +#529712 = FILL_AREA_STYLE_COLOUR('',#517768); +#529713 = OVER_RIDING_STYLED_ITEM('overriding color',(#529714),#56375, + #529662); +#529714 = PRESENTATION_STYLE_ASSIGNMENT((#529715)); +#529715 = SURFACE_STYLE_USAGE(.BOTH.,#529716); +#529716 = SURFACE_SIDE_STYLE('',(#529717)); +#529717 = SURFACE_STYLE_FILL_AREA(#529718); +#529718 = FILL_AREA_STYLE('',(#529719)); +#529719 = FILL_AREA_STYLE_COLOUR('',#517768); +#529720 = OVER_RIDING_STYLED_ITEM('overriding color',(#529721),#56392, + #529662); +#529721 = PRESENTATION_STYLE_ASSIGNMENT((#529722)); +#529722 = SURFACE_STYLE_USAGE(.BOTH.,#529723); +#529723 = SURFACE_SIDE_STYLE('',(#529724)); +#529724 = SURFACE_STYLE_FILL_AREA(#529725); +#529725 = FILL_AREA_STYLE('',(#529726)); +#529726 = FILL_AREA_STYLE_COLOUR('',#517768); +#529727 = OVER_RIDING_STYLED_ITEM('overriding color',(#529728),#56416, + #529662); +#529728 = PRESENTATION_STYLE_ASSIGNMENT((#529729)); +#529729 = SURFACE_STYLE_USAGE(.BOTH.,#529730); +#529730 = SURFACE_SIDE_STYLE('',(#529731)); +#529731 = SURFACE_STYLE_FILL_AREA(#529732); +#529732 = FILL_AREA_STYLE('',(#529733)); +#529733 = FILL_AREA_STYLE_COLOUR('',#517768); +#529734 = OVER_RIDING_STYLED_ITEM('overriding color',(#529735),#56447, + #529662); +#529735 = PRESENTATION_STYLE_ASSIGNMENT((#529736)); +#529736 = SURFACE_STYLE_USAGE(.BOTH.,#529737); +#529737 = SURFACE_SIDE_STYLE('',(#529738)); +#529738 = SURFACE_STYLE_FILL_AREA(#529739); +#529739 = FILL_AREA_STYLE('',(#529740)); +#529740 = FILL_AREA_STYLE_COLOUR('',#517768); +#529741 = OVER_RIDING_STYLED_ITEM('overriding color',(#529742),#56464, + #529662); +#529742 = PRESENTATION_STYLE_ASSIGNMENT((#529743)); +#529743 = SURFACE_STYLE_USAGE(.BOTH.,#529744); +#529744 = SURFACE_SIDE_STYLE('',(#529745)); +#529745 = SURFACE_STYLE_FILL_AREA(#529746); +#529746 = FILL_AREA_STYLE('',(#529747)); +#529747 = FILL_AREA_STYLE_COLOUR('',#517768); +#529748 = OVER_RIDING_STYLED_ITEM('overriding color',(#529749),#56493, + #529662); +#529749 = PRESENTATION_STYLE_ASSIGNMENT((#529750)); +#529750 = SURFACE_STYLE_USAGE(.BOTH.,#529751); +#529751 = SURFACE_SIDE_STYLE('',(#529752)); +#529752 = SURFACE_STYLE_FILL_AREA(#529753); +#529753 = FILL_AREA_STYLE('',(#529754)); +#529754 = FILL_AREA_STYLE_COLOUR('',#517768); +#529755 = OVER_RIDING_STYLED_ITEM('overriding color',(#529756),#56517, + #529662); +#529756 = PRESENTATION_STYLE_ASSIGNMENT((#529757)); +#529757 = SURFACE_STYLE_USAGE(.BOTH.,#529758); +#529758 = SURFACE_SIDE_STYLE('',(#529759)); +#529759 = SURFACE_STYLE_FILL_AREA(#529760); +#529760 = FILL_AREA_STYLE('',(#529761)); +#529761 = FILL_AREA_STYLE_COLOUR('',#517768); +#529762 = OVER_RIDING_STYLED_ITEM('overriding color',(#529763),#56543, + #529662); +#529763 = PRESENTATION_STYLE_ASSIGNMENT((#529764)); +#529764 = SURFACE_STYLE_USAGE(.BOTH.,#529765); +#529765 = SURFACE_SIDE_STYLE('',(#529766)); +#529766 = SURFACE_STYLE_FILL_AREA(#529767); +#529767 = FILL_AREA_STYLE('',(#529768)); +#529768 = FILL_AREA_STYLE_COLOUR('',#517768); +#529769 = OVER_RIDING_STYLED_ITEM('overriding color',(#529770),#56567, + #529662); +#529770 = PRESENTATION_STYLE_ASSIGNMENT((#529771)); +#529771 = SURFACE_STYLE_USAGE(.BOTH.,#529772); +#529772 = SURFACE_SIDE_STYLE('',(#529773)); +#529773 = SURFACE_STYLE_FILL_AREA(#529774); +#529774 = FILL_AREA_STYLE('',(#529775)); +#529775 = FILL_AREA_STYLE_COLOUR('',#517768); +#529776 = OVER_RIDING_STYLED_ITEM('overriding color',(#529777),#56594, + #529662); +#529777 = PRESENTATION_STYLE_ASSIGNMENT((#529778)); +#529778 = SURFACE_STYLE_USAGE(.BOTH.,#529779); +#529779 = SURFACE_SIDE_STYLE('',(#529780)); +#529780 = SURFACE_STYLE_FILL_AREA(#529781); +#529781 = FILL_AREA_STYLE('',(#529782)); +#529782 = FILL_AREA_STYLE_COLOUR('',#517768); +#529783 = OVER_RIDING_STYLED_ITEM('overriding color',(#529784),#56606, + #529662); +#529784 = PRESENTATION_STYLE_ASSIGNMENT((#529785)); +#529785 = SURFACE_STYLE_USAGE(.BOTH.,#529786); +#529786 = SURFACE_SIDE_STYLE('',(#529787)); +#529787 = SURFACE_STYLE_FILL_AREA(#529788); +#529788 = FILL_AREA_STYLE('',(#529789)); +#529789 = FILL_AREA_STYLE_COLOUR('',#517768); +#529790 = OVER_RIDING_STYLED_ITEM('overriding color',(#529791),#56623, + #529662); +#529791 = PRESENTATION_STYLE_ASSIGNMENT((#529792)); +#529792 = SURFACE_STYLE_USAGE(.BOTH.,#529793); +#529793 = SURFACE_SIDE_STYLE('',(#529794)); +#529794 = SURFACE_STYLE_FILL_AREA(#529795); +#529795 = FILL_AREA_STYLE('',(#529796)); +#529796 = FILL_AREA_STYLE_COLOUR('',#517768); +#529797 = STYLED_ITEM('color',(#529798),#56635); +#529798 = PRESENTATION_STYLE_ASSIGNMENT((#529799,#529804)); +#529799 = SURFACE_STYLE_USAGE(.BOTH.,#529800); +#529800 = SURFACE_SIDE_STYLE('',(#529801)); +#529801 = SURFACE_STYLE_FILL_AREA(#529802); +#529802 = FILL_AREA_STYLE('',(#529803)); +#529803 = FILL_AREA_STYLE_COLOUR('',#523837); +#529804 = CURVE_STYLE('',#529805,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529805 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529806 = OVER_RIDING_STYLED_ITEM('overriding color',(#529807),#56637, + #529797); +#529807 = PRESENTATION_STYLE_ASSIGNMENT((#529808)); +#529808 = SURFACE_STYLE_USAGE(.BOTH.,#529809); +#529809 = SURFACE_SIDE_STYLE('',(#529810)); +#529810 = SURFACE_STYLE_FILL_AREA(#529811); +#529811 = FILL_AREA_STYLE('',(#529812)); +#529812 = FILL_AREA_STYLE_COLOUR('',#517768); +#529813 = OVER_RIDING_STYLED_ITEM('overriding color',(#529814),#56677, + #529797); +#529814 = PRESENTATION_STYLE_ASSIGNMENT((#529815)); +#529815 = SURFACE_STYLE_USAGE(.BOTH.,#529816); +#529816 = SURFACE_SIDE_STYLE('',(#529817)); +#529817 = SURFACE_STYLE_FILL_AREA(#529818); +#529818 = FILL_AREA_STYLE('',(#529819)); +#529819 = FILL_AREA_STYLE_COLOUR('',#517768); +#529820 = OVER_RIDING_STYLED_ITEM('overriding color',(#529821),#56708, + #529797); +#529821 = PRESENTATION_STYLE_ASSIGNMENT((#529822)); +#529822 = SURFACE_STYLE_USAGE(.BOTH.,#529823); +#529823 = SURFACE_SIDE_STYLE('',(#529824)); +#529824 = SURFACE_STYLE_FILL_AREA(#529825); +#529825 = FILL_AREA_STYLE('',(#529826)); +#529826 = FILL_AREA_STYLE_COLOUR('',#517768); +#529827 = OVER_RIDING_STYLED_ITEM('overriding color',(#529828),#56739, + #529797); +#529828 = PRESENTATION_STYLE_ASSIGNMENT((#529829)); +#529829 = SURFACE_STYLE_USAGE(.BOTH.,#529830); +#529830 = SURFACE_SIDE_STYLE('',(#529831)); +#529831 = SURFACE_STYLE_FILL_AREA(#529832); +#529832 = FILL_AREA_STYLE('',(#529833)); +#529833 = FILL_AREA_STYLE_COLOUR('',#517768); +#529834 = OVER_RIDING_STYLED_ITEM('overriding color',(#529835),#56789, + #529797); +#529835 = PRESENTATION_STYLE_ASSIGNMENT((#529836)); +#529836 = SURFACE_STYLE_USAGE(.BOTH.,#529837); +#529837 = SURFACE_SIDE_STYLE('',(#529838)); +#529838 = SURFACE_STYLE_FILL_AREA(#529839); +#529839 = FILL_AREA_STYLE('',(#529840)); +#529840 = FILL_AREA_STYLE_COLOUR('',#517768); +#529841 = OVER_RIDING_STYLED_ITEM('overriding color',(#529842),#56820, + #529797); +#529842 = PRESENTATION_STYLE_ASSIGNMENT((#529843)); +#529843 = SURFACE_STYLE_USAGE(.BOTH.,#529844); +#529844 = SURFACE_SIDE_STYLE('',(#529845)); +#529845 = SURFACE_STYLE_FILL_AREA(#529846); +#529846 = FILL_AREA_STYLE('',(#529847)); +#529847 = FILL_AREA_STYLE_COLOUR('',#517768); +#529848 = OVER_RIDING_STYLED_ITEM('overriding color',(#529849),#56853, + #529797); +#529849 = PRESENTATION_STYLE_ASSIGNMENT((#529850)); +#529850 = SURFACE_STYLE_USAGE(.BOTH.,#529851); +#529851 = SURFACE_SIDE_STYLE('',(#529852)); +#529852 = SURFACE_STYLE_FILL_AREA(#529853); +#529853 = FILL_AREA_STYLE('',(#529854)); +#529854 = FILL_AREA_STYLE_COLOUR('',#517768); +#529855 = OVER_RIDING_STYLED_ITEM('overriding color',(#529856),#56870, + #529797); +#529856 = PRESENTATION_STYLE_ASSIGNMENT((#529857)); +#529857 = SURFACE_STYLE_USAGE(.BOTH.,#529858); +#529858 = SURFACE_SIDE_STYLE('',(#529859)); +#529859 = SURFACE_STYLE_FILL_AREA(#529860); +#529860 = FILL_AREA_STYLE('',(#529861)); +#529861 = FILL_AREA_STYLE_COLOUR('',#517768); +#529862 = OVER_RIDING_STYLED_ITEM('overriding color',(#529863),#56894, + #529797); +#529863 = PRESENTATION_STYLE_ASSIGNMENT((#529864)); +#529864 = SURFACE_STYLE_USAGE(.BOTH.,#529865); +#529865 = SURFACE_SIDE_STYLE('',(#529866)); +#529866 = SURFACE_STYLE_FILL_AREA(#529867); +#529867 = FILL_AREA_STYLE('',(#529868)); +#529868 = FILL_AREA_STYLE_COLOUR('',#517768); +#529869 = OVER_RIDING_STYLED_ITEM('overriding color',(#529870),#56925, + #529797); +#529870 = PRESENTATION_STYLE_ASSIGNMENT((#529871)); +#529871 = SURFACE_STYLE_USAGE(.BOTH.,#529872); +#529872 = SURFACE_SIDE_STYLE('',(#529873)); +#529873 = SURFACE_STYLE_FILL_AREA(#529874); +#529874 = FILL_AREA_STYLE('',(#529875)); +#529875 = FILL_AREA_STYLE_COLOUR('',#517768); +#529876 = OVER_RIDING_STYLED_ITEM('overriding color',(#529877),#56942, + #529797); +#529877 = PRESENTATION_STYLE_ASSIGNMENT((#529878)); +#529878 = SURFACE_STYLE_USAGE(.BOTH.,#529879); +#529879 = SURFACE_SIDE_STYLE('',(#529880)); +#529880 = SURFACE_STYLE_FILL_AREA(#529881); +#529881 = FILL_AREA_STYLE('',(#529882)); +#529882 = FILL_AREA_STYLE_COLOUR('',#517768); +#529883 = OVER_RIDING_STYLED_ITEM('overriding color',(#529884),#56971, + #529797); +#529884 = PRESENTATION_STYLE_ASSIGNMENT((#529885)); +#529885 = SURFACE_STYLE_USAGE(.BOTH.,#529886); +#529886 = SURFACE_SIDE_STYLE('',(#529887)); +#529887 = SURFACE_STYLE_FILL_AREA(#529888); +#529888 = FILL_AREA_STYLE('',(#529889)); +#529889 = FILL_AREA_STYLE_COLOUR('',#517768); +#529890 = OVER_RIDING_STYLED_ITEM('overriding color',(#529891),#56995, + #529797); +#529891 = PRESENTATION_STYLE_ASSIGNMENT((#529892)); +#529892 = SURFACE_STYLE_USAGE(.BOTH.,#529893); +#529893 = SURFACE_SIDE_STYLE('',(#529894)); +#529894 = SURFACE_STYLE_FILL_AREA(#529895); +#529895 = FILL_AREA_STYLE('',(#529896)); +#529896 = FILL_AREA_STYLE_COLOUR('',#517768); +#529897 = OVER_RIDING_STYLED_ITEM('overriding color',(#529898),#57021, + #529797); +#529898 = PRESENTATION_STYLE_ASSIGNMENT((#529899)); +#529899 = SURFACE_STYLE_USAGE(.BOTH.,#529900); +#529900 = SURFACE_SIDE_STYLE('',(#529901)); +#529901 = SURFACE_STYLE_FILL_AREA(#529902); +#529902 = FILL_AREA_STYLE('',(#529903)); +#529903 = FILL_AREA_STYLE_COLOUR('',#517768); +#529904 = OVER_RIDING_STYLED_ITEM('overriding color',(#529905),#57045, + #529797); +#529905 = PRESENTATION_STYLE_ASSIGNMENT((#529906)); +#529906 = SURFACE_STYLE_USAGE(.BOTH.,#529907); +#529907 = SURFACE_SIDE_STYLE('',(#529908)); +#529908 = SURFACE_STYLE_FILL_AREA(#529909); +#529909 = FILL_AREA_STYLE('',(#529910)); +#529910 = FILL_AREA_STYLE_COLOUR('',#517768); +#529911 = OVER_RIDING_STYLED_ITEM('overriding color',(#529912),#57072, + #529797); +#529912 = PRESENTATION_STYLE_ASSIGNMENT((#529913)); +#529913 = SURFACE_STYLE_USAGE(.BOTH.,#529914); +#529914 = SURFACE_SIDE_STYLE('',(#529915)); +#529915 = SURFACE_STYLE_FILL_AREA(#529916); +#529916 = FILL_AREA_STYLE('',(#529917)); +#529917 = FILL_AREA_STYLE_COLOUR('',#517768); +#529918 = OVER_RIDING_STYLED_ITEM('overriding color',(#529919),#57084, + #529797); +#529919 = PRESENTATION_STYLE_ASSIGNMENT((#529920)); +#529920 = SURFACE_STYLE_USAGE(.BOTH.,#529921); +#529921 = SURFACE_SIDE_STYLE('',(#529922)); +#529922 = SURFACE_STYLE_FILL_AREA(#529923); +#529923 = FILL_AREA_STYLE('',(#529924)); +#529924 = FILL_AREA_STYLE_COLOUR('',#517768); +#529925 = OVER_RIDING_STYLED_ITEM('overriding color',(#529926),#57101, + #529797); +#529926 = PRESENTATION_STYLE_ASSIGNMENT((#529927)); +#529927 = SURFACE_STYLE_USAGE(.BOTH.,#529928); +#529928 = SURFACE_SIDE_STYLE('',(#529929)); +#529929 = SURFACE_STYLE_FILL_AREA(#529930); +#529930 = FILL_AREA_STYLE('',(#529931)); +#529931 = FILL_AREA_STYLE_COLOUR('',#517768); +#529932 = STYLED_ITEM('color',(#529933),#57113); +#529933 = PRESENTATION_STYLE_ASSIGNMENT((#529934,#529939)); +#529934 = SURFACE_STYLE_USAGE(.BOTH.,#529935); +#529935 = SURFACE_SIDE_STYLE('',(#529936)); +#529936 = SURFACE_STYLE_FILL_AREA(#529937); +#529937 = FILL_AREA_STYLE('',(#529938)); +#529938 = FILL_AREA_STYLE_COLOUR('',#523837); +#529939 = CURVE_STYLE('',#529940,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#529940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#529941 = OVER_RIDING_STYLED_ITEM('overriding color',(#529942),#57115, + #529932); +#529942 = PRESENTATION_STYLE_ASSIGNMENT((#529943)); +#529943 = SURFACE_STYLE_USAGE(.BOTH.,#529944); +#529944 = SURFACE_SIDE_STYLE('',(#529945)); +#529945 = SURFACE_STYLE_FILL_AREA(#529946); +#529946 = FILL_AREA_STYLE('',(#529947)); +#529947 = FILL_AREA_STYLE_COLOUR('',#517768); +#529948 = OVER_RIDING_STYLED_ITEM('overriding color',(#529949),#57155, + #529932); +#529949 = PRESENTATION_STYLE_ASSIGNMENT((#529950)); +#529950 = SURFACE_STYLE_USAGE(.BOTH.,#529951); +#529951 = SURFACE_SIDE_STYLE('',(#529952)); +#529952 = SURFACE_STYLE_FILL_AREA(#529953); +#529953 = FILL_AREA_STYLE('',(#529954)); +#529954 = FILL_AREA_STYLE_COLOUR('',#517768); +#529955 = OVER_RIDING_STYLED_ITEM('overriding color',(#529956),#57186, + #529932); +#529956 = PRESENTATION_STYLE_ASSIGNMENT((#529957)); +#529957 = SURFACE_STYLE_USAGE(.BOTH.,#529958); +#529958 = SURFACE_SIDE_STYLE('',(#529959)); +#529959 = SURFACE_STYLE_FILL_AREA(#529960); +#529960 = FILL_AREA_STYLE('',(#529961)); +#529961 = FILL_AREA_STYLE_COLOUR('',#517768); +#529962 = OVER_RIDING_STYLED_ITEM('overriding color',(#529963),#57217, + #529932); +#529963 = PRESENTATION_STYLE_ASSIGNMENT((#529964)); +#529964 = SURFACE_STYLE_USAGE(.BOTH.,#529965); +#529965 = SURFACE_SIDE_STYLE('',(#529966)); +#529966 = SURFACE_STYLE_FILL_AREA(#529967); +#529967 = FILL_AREA_STYLE('',(#529968)); +#529968 = FILL_AREA_STYLE_COLOUR('',#517768); +#529969 = OVER_RIDING_STYLED_ITEM('overriding color',(#529970),#57267, + #529932); +#529970 = PRESENTATION_STYLE_ASSIGNMENT((#529971)); +#529971 = SURFACE_STYLE_USAGE(.BOTH.,#529972); +#529972 = SURFACE_SIDE_STYLE('',(#529973)); +#529973 = SURFACE_STYLE_FILL_AREA(#529974); +#529974 = FILL_AREA_STYLE('',(#529975)); +#529975 = FILL_AREA_STYLE_COLOUR('',#517768); +#529976 = OVER_RIDING_STYLED_ITEM('overriding color',(#529977),#57298, + #529932); +#529977 = PRESENTATION_STYLE_ASSIGNMENT((#529978)); +#529978 = SURFACE_STYLE_USAGE(.BOTH.,#529979); +#529979 = SURFACE_SIDE_STYLE('',(#529980)); +#529980 = SURFACE_STYLE_FILL_AREA(#529981); +#529981 = FILL_AREA_STYLE('',(#529982)); +#529982 = FILL_AREA_STYLE_COLOUR('',#517768); +#529983 = OVER_RIDING_STYLED_ITEM('overriding color',(#529984),#57331, + #529932); +#529984 = PRESENTATION_STYLE_ASSIGNMENT((#529985)); +#529985 = SURFACE_STYLE_USAGE(.BOTH.,#529986); +#529986 = SURFACE_SIDE_STYLE('',(#529987)); +#529987 = SURFACE_STYLE_FILL_AREA(#529988); +#529988 = FILL_AREA_STYLE('',(#529989)); +#529989 = FILL_AREA_STYLE_COLOUR('',#517768); +#529990 = OVER_RIDING_STYLED_ITEM('overriding color',(#529991),#57348, + #529932); +#529991 = PRESENTATION_STYLE_ASSIGNMENT((#529992)); +#529992 = SURFACE_STYLE_USAGE(.BOTH.,#529993); +#529993 = SURFACE_SIDE_STYLE('',(#529994)); +#529994 = SURFACE_STYLE_FILL_AREA(#529995); +#529995 = FILL_AREA_STYLE('',(#529996)); +#529996 = FILL_AREA_STYLE_COLOUR('',#517768); +#529997 = OVER_RIDING_STYLED_ITEM('overriding color',(#529998),#57372, + #529932); +#529998 = PRESENTATION_STYLE_ASSIGNMENT((#529999)); +#529999 = SURFACE_STYLE_USAGE(.BOTH.,#530000); +#530000 = SURFACE_SIDE_STYLE('',(#530001)); +#530001 = SURFACE_STYLE_FILL_AREA(#530002); +#530002 = FILL_AREA_STYLE('',(#530003)); +#530003 = FILL_AREA_STYLE_COLOUR('',#517768); +#530004 = OVER_RIDING_STYLED_ITEM('overriding color',(#530005),#57403, + #529932); +#530005 = PRESENTATION_STYLE_ASSIGNMENT((#530006)); +#530006 = SURFACE_STYLE_USAGE(.BOTH.,#530007); +#530007 = SURFACE_SIDE_STYLE('',(#530008)); +#530008 = SURFACE_STYLE_FILL_AREA(#530009); +#530009 = FILL_AREA_STYLE('',(#530010)); +#530010 = FILL_AREA_STYLE_COLOUR('',#517768); +#530011 = OVER_RIDING_STYLED_ITEM('overriding color',(#530012),#57420, + #529932); +#530012 = PRESENTATION_STYLE_ASSIGNMENT((#530013)); +#530013 = SURFACE_STYLE_USAGE(.BOTH.,#530014); +#530014 = SURFACE_SIDE_STYLE('',(#530015)); +#530015 = SURFACE_STYLE_FILL_AREA(#530016); +#530016 = FILL_AREA_STYLE('',(#530017)); +#530017 = FILL_AREA_STYLE_COLOUR('',#517768); +#530018 = OVER_RIDING_STYLED_ITEM('overriding color',(#530019),#57449, + #529932); +#530019 = PRESENTATION_STYLE_ASSIGNMENT((#530020)); +#530020 = SURFACE_STYLE_USAGE(.BOTH.,#530021); +#530021 = SURFACE_SIDE_STYLE('',(#530022)); +#530022 = SURFACE_STYLE_FILL_AREA(#530023); +#530023 = FILL_AREA_STYLE('',(#530024)); +#530024 = FILL_AREA_STYLE_COLOUR('',#517768); +#530025 = OVER_RIDING_STYLED_ITEM('overriding color',(#530026),#57473, + #529932); +#530026 = PRESENTATION_STYLE_ASSIGNMENT((#530027)); +#530027 = SURFACE_STYLE_USAGE(.BOTH.,#530028); +#530028 = SURFACE_SIDE_STYLE('',(#530029)); +#530029 = SURFACE_STYLE_FILL_AREA(#530030); +#530030 = FILL_AREA_STYLE('',(#530031)); +#530031 = FILL_AREA_STYLE_COLOUR('',#517768); +#530032 = OVER_RIDING_STYLED_ITEM('overriding color',(#530033),#57499, + #529932); +#530033 = PRESENTATION_STYLE_ASSIGNMENT((#530034)); +#530034 = SURFACE_STYLE_USAGE(.BOTH.,#530035); +#530035 = SURFACE_SIDE_STYLE('',(#530036)); +#530036 = SURFACE_STYLE_FILL_AREA(#530037); +#530037 = FILL_AREA_STYLE('',(#530038)); +#530038 = FILL_AREA_STYLE_COLOUR('',#517768); +#530039 = OVER_RIDING_STYLED_ITEM('overriding color',(#530040),#57523, + #529932); +#530040 = PRESENTATION_STYLE_ASSIGNMENT((#530041)); +#530041 = SURFACE_STYLE_USAGE(.BOTH.,#530042); +#530042 = SURFACE_SIDE_STYLE('',(#530043)); +#530043 = SURFACE_STYLE_FILL_AREA(#530044); +#530044 = FILL_AREA_STYLE('',(#530045)); +#530045 = FILL_AREA_STYLE_COLOUR('',#517768); +#530046 = OVER_RIDING_STYLED_ITEM('overriding color',(#530047),#57550, + #529932); +#530047 = PRESENTATION_STYLE_ASSIGNMENT((#530048)); +#530048 = SURFACE_STYLE_USAGE(.BOTH.,#530049); +#530049 = SURFACE_SIDE_STYLE('',(#530050)); +#530050 = SURFACE_STYLE_FILL_AREA(#530051); +#530051 = FILL_AREA_STYLE('',(#530052)); +#530052 = FILL_AREA_STYLE_COLOUR('',#517768); +#530053 = OVER_RIDING_STYLED_ITEM('overriding color',(#530054),#57562, + #529932); +#530054 = PRESENTATION_STYLE_ASSIGNMENT((#530055)); +#530055 = SURFACE_STYLE_USAGE(.BOTH.,#530056); +#530056 = SURFACE_SIDE_STYLE('',(#530057)); +#530057 = SURFACE_STYLE_FILL_AREA(#530058); +#530058 = FILL_AREA_STYLE('',(#530059)); +#530059 = FILL_AREA_STYLE_COLOUR('',#517768); +#530060 = OVER_RIDING_STYLED_ITEM('overriding color',(#530061),#57579, + #529932); +#530061 = PRESENTATION_STYLE_ASSIGNMENT((#530062)); +#530062 = SURFACE_STYLE_USAGE(.BOTH.,#530063); +#530063 = SURFACE_SIDE_STYLE('',(#530064)); +#530064 = SURFACE_STYLE_FILL_AREA(#530065); +#530065 = FILL_AREA_STYLE('',(#530066)); +#530066 = FILL_AREA_STYLE_COLOUR('',#517768); +#530067 = STYLED_ITEM('color',(#530068),#57591); +#530068 = PRESENTATION_STYLE_ASSIGNMENT((#530069,#530074)); +#530069 = SURFACE_STYLE_USAGE(.BOTH.,#530070); +#530070 = SURFACE_SIDE_STYLE('',(#530071)); +#530071 = SURFACE_STYLE_FILL_AREA(#530072); +#530072 = FILL_AREA_STYLE('',(#530073)); +#530073 = FILL_AREA_STYLE_COLOUR('',#523837); +#530074 = CURVE_STYLE('',#530075,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530076 = OVER_RIDING_STYLED_ITEM('overriding color',(#530077),#57593, + #530067); +#530077 = PRESENTATION_STYLE_ASSIGNMENT((#530078)); +#530078 = SURFACE_STYLE_USAGE(.BOTH.,#530079); +#530079 = SURFACE_SIDE_STYLE('',(#530080)); +#530080 = SURFACE_STYLE_FILL_AREA(#530081); +#530081 = FILL_AREA_STYLE('',(#530082)); +#530082 = FILL_AREA_STYLE_COLOUR('',#517768); +#530083 = OVER_RIDING_STYLED_ITEM('overriding color',(#530084),#57633, + #530067); +#530084 = PRESENTATION_STYLE_ASSIGNMENT((#530085)); +#530085 = SURFACE_STYLE_USAGE(.BOTH.,#530086); +#530086 = SURFACE_SIDE_STYLE('',(#530087)); +#530087 = SURFACE_STYLE_FILL_AREA(#530088); +#530088 = FILL_AREA_STYLE('',(#530089)); +#530089 = FILL_AREA_STYLE_COLOUR('',#517768); +#530090 = OVER_RIDING_STYLED_ITEM('overriding color',(#530091),#57664, + #530067); +#530091 = PRESENTATION_STYLE_ASSIGNMENT((#530092)); +#530092 = SURFACE_STYLE_USAGE(.BOTH.,#530093); +#530093 = SURFACE_SIDE_STYLE('',(#530094)); +#530094 = SURFACE_STYLE_FILL_AREA(#530095); +#530095 = FILL_AREA_STYLE('',(#530096)); +#530096 = FILL_AREA_STYLE_COLOUR('',#517768); +#530097 = OVER_RIDING_STYLED_ITEM('overriding color',(#530098),#57695, + #530067); +#530098 = PRESENTATION_STYLE_ASSIGNMENT((#530099)); +#530099 = SURFACE_STYLE_USAGE(.BOTH.,#530100); +#530100 = SURFACE_SIDE_STYLE('',(#530101)); +#530101 = SURFACE_STYLE_FILL_AREA(#530102); +#530102 = FILL_AREA_STYLE('',(#530103)); +#530103 = FILL_AREA_STYLE_COLOUR('',#517768); +#530104 = OVER_RIDING_STYLED_ITEM('overriding color',(#530105),#57745, + #530067); +#530105 = PRESENTATION_STYLE_ASSIGNMENT((#530106)); +#530106 = SURFACE_STYLE_USAGE(.BOTH.,#530107); +#530107 = SURFACE_SIDE_STYLE('',(#530108)); +#530108 = SURFACE_STYLE_FILL_AREA(#530109); +#530109 = FILL_AREA_STYLE('',(#530110)); +#530110 = FILL_AREA_STYLE_COLOUR('',#517768); +#530111 = OVER_RIDING_STYLED_ITEM('overriding color',(#530112),#57776, + #530067); +#530112 = PRESENTATION_STYLE_ASSIGNMENT((#530113)); +#530113 = SURFACE_STYLE_USAGE(.BOTH.,#530114); +#530114 = SURFACE_SIDE_STYLE('',(#530115)); +#530115 = SURFACE_STYLE_FILL_AREA(#530116); +#530116 = FILL_AREA_STYLE('',(#530117)); +#530117 = FILL_AREA_STYLE_COLOUR('',#517768); +#530118 = OVER_RIDING_STYLED_ITEM('overriding color',(#530119),#57809, + #530067); +#530119 = PRESENTATION_STYLE_ASSIGNMENT((#530120)); +#530120 = SURFACE_STYLE_USAGE(.BOTH.,#530121); +#530121 = SURFACE_SIDE_STYLE('',(#530122)); +#530122 = SURFACE_STYLE_FILL_AREA(#530123); +#530123 = FILL_AREA_STYLE('',(#530124)); +#530124 = FILL_AREA_STYLE_COLOUR('',#517768); +#530125 = OVER_RIDING_STYLED_ITEM('overriding color',(#530126),#57826, + #530067); +#530126 = PRESENTATION_STYLE_ASSIGNMENT((#530127)); +#530127 = SURFACE_STYLE_USAGE(.BOTH.,#530128); +#530128 = SURFACE_SIDE_STYLE('',(#530129)); +#530129 = SURFACE_STYLE_FILL_AREA(#530130); +#530130 = FILL_AREA_STYLE('',(#530131)); +#530131 = FILL_AREA_STYLE_COLOUR('',#517768); +#530132 = OVER_RIDING_STYLED_ITEM('overriding color',(#530133),#57850, + #530067); +#530133 = PRESENTATION_STYLE_ASSIGNMENT((#530134)); +#530134 = SURFACE_STYLE_USAGE(.BOTH.,#530135); +#530135 = SURFACE_SIDE_STYLE('',(#530136)); +#530136 = SURFACE_STYLE_FILL_AREA(#530137); +#530137 = FILL_AREA_STYLE('',(#530138)); +#530138 = FILL_AREA_STYLE_COLOUR('',#517768); +#530139 = OVER_RIDING_STYLED_ITEM('overriding color',(#530140),#57881, + #530067); +#530140 = PRESENTATION_STYLE_ASSIGNMENT((#530141)); +#530141 = SURFACE_STYLE_USAGE(.BOTH.,#530142); +#530142 = SURFACE_SIDE_STYLE('',(#530143)); +#530143 = SURFACE_STYLE_FILL_AREA(#530144); +#530144 = FILL_AREA_STYLE('',(#530145)); +#530145 = FILL_AREA_STYLE_COLOUR('',#517768); +#530146 = OVER_RIDING_STYLED_ITEM('overriding color',(#530147),#57898, + #530067); +#530147 = PRESENTATION_STYLE_ASSIGNMENT((#530148)); +#530148 = SURFACE_STYLE_USAGE(.BOTH.,#530149); +#530149 = SURFACE_SIDE_STYLE('',(#530150)); +#530150 = SURFACE_STYLE_FILL_AREA(#530151); +#530151 = FILL_AREA_STYLE('',(#530152)); +#530152 = FILL_AREA_STYLE_COLOUR('',#517768); +#530153 = OVER_RIDING_STYLED_ITEM('overriding color',(#530154),#57927, + #530067); +#530154 = PRESENTATION_STYLE_ASSIGNMENT((#530155)); +#530155 = SURFACE_STYLE_USAGE(.BOTH.,#530156); +#530156 = SURFACE_SIDE_STYLE('',(#530157)); +#530157 = SURFACE_STYLE_FILL_AREA(#530158); +#530158 = FILL_AREA_STYLE('',(#530159)); +#530159 = FILL_AREA_STYLE_COLOUR('',#517768); +#530160 = OVER_RIDING_STYLED_ITEM('overriding color',(#530161),#57951, + #530067); +#530161 = PRESENTATION_STYLE_ASSIGNMENT((#530162)); +#530162 = SURFACE_STYLE_USAGE(.BOTH.,#530163); +#530163 = SURFACE_SIDE_STYLE('',(#530164)); +#530164 = SURFACE_STYLE_FILL_AREA(#530165); +#530165 = FILL_AREA_STYLE('',(#530166)); +#530166 = FILL_AREA_STYLE_COLOUR('',#517768); +#530167 = OVER_RIDING_STYLED_ITEM('overriding color',(#530168),#57977, + #530067); +#530168 = PRESENTATION_STYLE_ASSIGNMENT((#530169)); +#530169 = SURFACE_STYLE_USAGE(.BOTH.,#530170); +#530170 = SURFACE_SIDE_STYLE('',(#530171)); +#530171 = SURFACE_STYLE_FILL_AREA(#530172); +#530172 = FILL_AREA_STYLE('',(#530173)); +#530173 = FILL_AREA_STYLE_COLOUR('',#517768); +#530174 = OVER_RIDING_STYLED_ITEM('overriding color',(#530175),#58001, + #530067); +#530175 = PRESENTATION_STYLE_ASSIGNMENT((#530176)); +#530176 = SURFACE_STYLE_USAGE(.BOTH.,#530177); +#530177 = SURFACE_SIDE_STYLE('',(#530178)); +#530178 = SURFACE_STYLE_FILL_AREA(#530179); +#530179 = FILL_AREA_STYLE('',(#530180)); +#530180 = FILL_AREA_STYLE_COLOUR('',#517768); +#530181 = OVER_RIDING_STYLED_ITEM('overriding color',(#530182),#58028, + #530067); +#530182 = PRESENTATION_STYLE_ASSIGNMENT((#530183)); +#530183 = SURFACE_STYLE_USAGE(.BOTH.,#530184); +#530184 = SURFACE_SIDE_STYLE('',(#530185)); +#530185 = SURFACE_STYLE_FILL_AREA(#530186); +#530186 = FILL_AREA_STYLE('',(#530187)); +#530187 = FILL_AREA_STYLE_COLOUR('',#517768); +#530188 = OVER_RIDING_STYLED_ITEM('overriding color',(#530189),#58040, + #530067); +#530189 = PRESENTATION_STYLE_ASSIGNMENT((#530190)); +#530190 = SURFACE_STYLE_USAGE(.BOTH.,#530191); +#530191 = SURFACE_SIDE_STYLE('',(#530192)); +#530192 = SURFACE_STYLE_FILL_AREA(#530193); +#530193 = FILL_AREA_STYLE('',(#530194)); +#530194 = FILL_AREA_STYLE_COLOUR('',#517768); +#530195 = OVER_RIDING_STYLED_ITEM('overriding color',(#530196),#58057, + #530067); +#530196 = PRESENTATION_STYLE_ASSIGNMENT((#530197)); +#530197 = SURFACE_STYLE_USAGE(.BOTH.,#530198); +#530198 = SURFACE_SIDE_STYLE('',(#530199)); +#530199 = SURFACE_STYLE_FILL_AREA(#530200); +#530200 = FILL_AREA_STYLE('',(#530201)); +#530201 = FILL_AREA_STYLE_COLOUR('',#517768); +#530202 = STYLED_ITEM('color',(#530203),#58069); +#530203 = PRESENTATION_STYLE_ASSIGNMENT((#530204,#530209)); +#530204 = SURFACE_STYLE_USAGE(.BOTH.,#530205); +#530205 = SURFACE_SIDE_STYLE('',(#530206)); +#530206 = SURFACE_STYLE_FILL_AREA(#530207); +#530207 = FILL_AREA_STYLE('',(#530208)); +#530208 = FILL_AREA_STYLE_COLOUR('',#523837); +#530209 = CURVE_STYLE('',#530210,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530211 = OVER_RIDING_STYLED_ITEM('overriding color',(#530212),#58071, + #530202); +#530212 = PRESENTATION_STYLE_ASSIGNMENT((#530213)); +#530213 = SURFACE_STYLE_USAGE(.BOTH.,#530214); +#530214 = SURFACE_SIDE_STYLE('',(#530215)); +#530215 = SURFACE_STYLE_FILL_AREA(#530216); +#530216 = FILL_AREA_STYLE('',(#530217)); +#530217 = FILL_AREA_STYLE_COLOUR('',#517768); +#530218 = OVER_RIDING_STYLED_ITEM('overriding color',(#530219),#58111, + #530202); +#530219 = PRESENTATION_STYLE_ASSIGNMENT((#530220)); +#530220 = SURFACE_STYLE_USAGE(.BOTH.,#530221); +#530221 = SURFACE_SIDE_STYLE('',(#530222)); +#530222 = SURFACE_STYLE_FILL_AREA(#530223); +#530223 = FILL_AREA_STYLE('',(#530224)); +#530224 = FILL_AREA_STYLE_COLOUR('',#517768); +#530225 = OVER_RIDING_STYLED_ITEM('overriding color',(#530226),#58142, + #530202); +#530226 = PRESENTATION_STYLE_ASSIGNMENT((#530227)); +#530227 = SURFACE_STYLE_USAGE(.BOTH.,#530228); +#530228 = SURFACE_SIDE_STYLE('',(#530229)); +#530229 = SURFACE_STYLE_FILL_AREA(#530230); +#530230 = FILL_AREA_STYLE('',(#530231)); +#530231 = FILL_AREA_STYLE_COLOUR('',#517768); +#530232 = OVER_RIDING_STYLED_ITEM('overriding color',(#530233),#58173, + #530202); +#530233 = PRESENTATION_STYLE_ASSIGNMENT((#530234)); +#530234 = SURFACE_STYLE_USAGE(.BOTH.,#530235); +#530235 = SURFACE_SIDE_STYLE('',(#530236)); +#530236 = SURFACE_STYLE_FILL_AREA(#530237); +#530237 = FILL_AREA_STYLE('',(#530238)); +#530238 = FILL_AREA_STYLE_COLOUR('',#517768); +#530239 = OVER_RIDING_STYLED_ITEM('overriding color',(#530240),#58223, + #530202); +#530240 = PRESENTATION_STYLE_ASSIGNMENT((#530241)); +#530241 = SURFACE_STYLE_USAGE(.BOTH.,#530242); +#530242 = SURFACE_SIDE_STYLE('',(#530243)); +#530243 = SURFACE_STYLE_FILL_AREA(#530244); +#530244 = FILL_AREA_STYLE('',(#530245)); +#530245 = FILL_AREA_STYLE_COLOUR('',#517768); +#530246 = OVER_RIDING_STYLED_ITEM('overriding color',(#530247),#58254, + #530202); +#530247 = PRESENTATION_STYLE_ASSIGNMENT((#530248)); +#530248 = SURFACE_STYLE_USAGE(.BOTH.,#530249); +#530249 = SURFACE_SIDE_STYLE('',(#530250)); +#530250 = SURFACE_STYLE_FILL_AREA(#530251); +#530251 = FILL_AREA_STYLE('',(#530252)); +#530252 = FILL_AREA_STYLE_COLOUR('',#517768); +#530253 = OVER_RIDING_STYLED_ITEM('overriding color',(#530254),#58287, + #530202); +#530254 = PRESENTATION_STYLE_ASSIGNMENT((#530255)); +#530255 = SURFACE_STYLE_USAGE(.BOTH.,#530256); +#530256 = SURFACE_SIDE_STYLE('',(#530257)); +#530257 = SURFACE_STYLE_FILL_AREA(#530258); +#530258 = FILL_AREA_STYLE('',(#530259)); +#530259 = FILL_AREA_STYLE_COLOUR('',#517768); +#530260 = OVER_RIDING_STYLED_ITEM('overriding color',(#530261),#58304, + #530202); +#530261 = PRESENTATION_STYLE_ASSIGNMENT((#530262)); +#530262 = SURFACE_STYLE_USAGE(.BOTH.,#530263); +#530263 = SURFACE_SIDE_STYLE('',(#530264)); +#530264 = SURFACE_STYLE_FILL_AREA(#530265); +#530265 = FILL_AREA_STYLE('',(#530266)); +#530266 = FILL_AREA_STYLE_COLOUR('',#517768); +#530267 = OVER_RIDING_STYLED_ITEM('overriding color',(#530268),#58328, + #530202); +#530268 = PRESENTATION_STYLE_ASSIGNMENT((#530269)); +#530269 = SURFACE_STYLE_USAGE(.BOTH.,#530270); +#530270 = SURFACE_SIDE_STYLE('',(#530271)); +#530271 = SURFACE_STYLE_FILL_AREA(#530272); +#530272 = FILL_AREA_STYLE('',(#530273)); +#530273 = FILL_AREA_STYLE_COLOUR('',#517768); +#530274 = OVER_RIDING_STYLED_ITEM('overriding color',(#530275),#58359, + #530202); +#530275 = PRESENTATION_STYLE_ASSIGNMENT((#530276)); +#530276 = SURFACE_STYLE_USAGE(.BOTH.,#530277); +#530277 = SURFACE_SIDE_STYLE('',(#530278)); +#530278 = SURFACE_STYLE_FILL_AREA(#530279); +#530279 = FILL_AREA_STYLE('',(#530280)); +#530280 = FILL_AREA_STYLE_COLOUR('',#517768); +#530281 = OVER_RIDING_STYLED_ITEM('overriding color',(#530282),#58376, + #530202); +#530282 = PRESENTATION_STYLE_ASSIGNMENT((#530283)); +#530283 = SURFACE_STYLE_USAGE(.BOTH.,#530284); +#530284 = SURFACE_SIDE_STYLE('',(#530285)); +#530285 = SURFACE_STYLE_FILL_AREA(#530286); +#530286 = FILL_AREA_STYLE('',(#530287)); +#530287 = FILL_AREA_STYLE_COLOUR('',#517768); +#530288 = OVER_RIDING_STYLED_ITEM('overriding color',(#530289),#58405, + #530202); +#530289 = PRESENTATION_STYLE_ASSIGNMENT((#530290)); +#530290 = SURFACE_STYLE_USAGE(.BOTH.,#530291); +#530291 = SURFACE_SIDE_STYLE('',(#530292)); +#530292 = SURFACE_STYLE_FILL_AREA(#530293); +#530293 = FILL_AREA_STYLE('',(#530294)); +#530294 = FILL_AREA_STYLE_COLOUR('',#517768); +#530295 = OVER_RIDING_STYLED_ITEM('overriding color',(#530296),#58429, + #530202); +#530296 = PRESENTATION_STYLE_ASSIGNMENT((#530297)); +#530297 = SURFACE_STYLE_USAGE(.BOTH.,#530298); +#530298 = SURFACE_SIDE_STYLE('',(#530299)); +#530299 = SURFACE_STYLE_FILL_AREA(#530300); +#530300 = FILL_AREA_STYLE('',(#530301)); +#530301 = FILL_AREA_STYLE_COLOUR('',#517768); +#530302 = OVER_RIDING_STYLED_ITEM('overriding color',(#530303),#58455, + #530202); +#530303 = PRESENTATION_STYLE_ASSIGNMENT((#530304)); +#530304 = SURFACE_STYLE_USAGE(.BOTH.,#530305); +#530305 = SURFACE_SIDE_STYLE('',(#530306)); +#530306 = SURFACE_STYLE_FILL_AREA(#530307); +#530307 = FILL_AREA_STYLE('',(#530308)); +#530308 = FILL_AREA_STYLE_COLOUR('',#517768); +#530309 = OVER_RIDING_STYLED_ITEM('overriding color',(#530310),#58479, + #530202); +#530310 = PRESENTATION_STYLE_ASSIGNMENT((#530311)); +#530311 = SURFACE_STYLE_USAGE(.BOTH.,#530312); +#530312 = SURFACE_SIDE_STYLE('',(#530313)); +#530313 = SURFACE_STYLE_FILL_AREA(#530314); +#530314 = FILL_AREA_STYLE('',(#530315)); +#530315 = FILL_AREA_STYLE_COLOUR('',#517768); +#530316 = OVER_RIDING_STYLED_ITEM('overriding color',(#530317),#58506, + #530202); +#530317 = PRESENTATION_STYLE_ASSIGNMENT((#530318)); +#530318 = SURFACE_STYLE_USAGE(.BOTH.,#530319); +#530319 = SURFACE_SIDE_STYLE('',(#530320)); +#530320 = SURFACE_STYLE_FILL_AREA(#530321); +#530321 = FILL_AREA_STYLE('',(#530322)); +#530322 = FILL_AREA_STYLE_COLOUR('',#517768); +#530323 = OVER_RIDING_STYLED_ITEM('overriding color',(#530324),#58518, + #530202); +#530324 = PRESENTATION_STYLE_ASSIGNMENT((#530325)); +#530325 = SURFACE_STYLE_USAGE(.BOTH.,#530326); +#530326 = SURFACE_SIDE_STYLE('',(#530327)); +#530327 = SURFACE_STYLE_FILL_AREA(#530328); +#530328 = FILL_AREA_STYLE('',(#530329)); +#530329 = FILL_AREA_STYLE_COLOUR('',#517768); +#530330 = OVER_RIDING_STYLED_ITEM('overriding color',(#530331),#58535, + #530202); +#530331 = PRESENTATION_STYLE_ASSIGNMENT((#530332)); +#530332 = SURFACE_STYLE_USAGE(.BOTH.,#530333); +#530333 = SURFACE_SIDE_STYLE('',(#530334)); +#530334 = SURFACE_STYLE_FILL_AREA(#530335); +#530335 = FILL_AREA_STYLE('',(#530336)); +#530336 = FILL_AREA_STYLE_COLOUR('',#517768); +#530337 = STYLED_ITEM('color',(#530338),#58547); +#530338 = PRESENTATION_STYLE_ASSIGNMENT((#530339,#530344)); +#530339 = SURFACE_STYLE_USAGE(.BOTH.,#530340); +#530340 = SURFACE_SIDE_STYLE('',(#530341)); +#530341 = SURFACE_STYLE_FILL_AREA(#530342); +#530342 = FILL_AREA_STYLE('',(#530343)); +#530343 = FILL_AREA_STYLE_COLOUR('',#523837); +#530344 = CURVE_STYLE('',#530345,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530346 = OVER_RIDING_STYLED_ITEM('overriding color',(#530347),#58549, + #530337); +#530347 = PRESENTATION_STYLE_ASSIGNMENT((#530348)); +#530348 = SURFACE_STYLE_USAGE(.BOTH.,#530349); +#530349 = SURFACE_SIDE_STYLE('',(#530350)); +#530350 = SURFACE_STYLE_FILL_AREA(#530351); +#530351 = FILL_AREA_STYLE('',(#530352)); +#530352 = FILL_AREA_STYLE_COLOUR('',#517768); +#530353 = OVER_RIDING_STYLED_ITEM('overriding color',(#530354),#58589, + #530337); +#530354 = PRESENTATION_STYLE_ASSIGNMENT((#530355)); +#530355 = SURFACE_STYLE_USAGE(.BOTH.,#530356); +#530356 = SURFACE_SIDE_STYLE('',(#530357)); +#530357 = SURFACE_STYLE_FILL_AREA(#530358); +#530358 = FILL_AREA_STYLE('',(#530359)); +#530359 = FILL_AREA_STYLE_COLOUR('',#517768); +#530360 = OVER_RIDING_STYLED_ITEM('overriding color',(#530361),#58620, + #530337); +#530361 = PRESENTATION_STYLE_ASSIGNMENT((#530362)); +#530362 = SURFACE_STYLE_USAGE(.BOTH.,#530363); +#530363 = SURFACE_SIDE_STYLE('',(#530364)); +#530364 = SURFACE_STYLE_FILL_AREA(#530365); +#530365 = FILL_AREA_STYLE('',(#530366)); +#530366 = FILL_AREA_STYLE_COLOUR('',#517768); +#530367 = OVER_RIDING_STYLED_ITEM('overriding color',(#530368),#58651, + #530337); +#530368 = PRESENTATION_STYLE_ASSIGNMENT((#530369)); +#530369 = SURFACE_STYLE_USAGE(.BOTH.,#530370); +#530370 = SURFACE_SIDE_STYLE('',(#530371)); +#530371 = SURFACE_STYLE_FILL_AREA(#530372); +#530372 = FILL_AREA_STYLE('',(#530373)); +#530373 = FILL_AREA_STYLE_COLOUR('',#517768); +#530374 = OVER_RIDING_STYLED_ITEM('overriding color',(#530375),#58701, + #530337); +#530375 = PRESENTATION_STYLE_ASSIGNMENT((#530376)); +#530376 = SURFACE_STYLE_USAGE(.BOTH.,#530377); +#530377 = SURFACE_SIDE_STYLE('',(#530378)); +#530378 = SURFACE_STYLE_FILL_AREA(#530379); +#530379 = FILL_AREA_STYLE('',(#530380)); +#530380 = FILL_AREA_STYLE_COLOUR('',#517768); +#530381 = OVER_RIDING_STYLED_ITEM('overriding color',(#530382),#58732, + #530337); +#530382 = PRESENTATION_STYLE_ASSIGNMENT((#530383)); +#530383 = SURFACE_STYLE_USAGE(.BOTH.,#530384); +#530384 = SURFACE_SIDE_STYLE('',(#530385)); +#530385 = SURFACE_STYLE_FILL_AREA(#530386); +#530386 = FILL_AREA_STYLE('',(#530387)); +#530387 = FILL_AREA_STYLE_COLOUR('',#517768); +#530388 = OVER_RIDING_STYLED_ITEM('overriding color',(#530389),#58765, + #530337); +#530389 = PRESENTATION_STYLE_ASSIGNMENT((#530390)); +#530390 = SURFACE_STYLE_USAGE(.BOTH.,#530391); +#530391 = SURFACE_SIDE_STYLE('',(#530392)); +#530392 = SURFACE_STYLE_FILL_AREA(#530393); +#530393 = FILL_AREA_STYLE('',(#530394)); +#530394 = FILL_AREA_STYLE_COLOUR('',#517768); +#530395 = OVER_RIDING_STYLED_ITEM('overriding color',(#530396),#58782, + #530337); +#530396 = PRESENTATION_STYLE_ASSIGNMENT((#530397)); +#530397 = SURFACE_STYLE_USAGE(.BOTH.,#530398); +#530398 = SURFACE_SIDE_STYLE('',(#530399)); +#530399 = SURFACE_STYLE_FILL_AREA(#530400); +#530400 = FILL_AREA_STYLE('',(#530401)); +#530401 = FILL_AREA_STYLE_COLOUR('',#517768); +#530402 = OVER_RIDING_STYLED_ITEM('overriding color',(#530403),#58806, + #530337); +#530403 = PRESENTATION_STYLE_ASSIGNMENT((#530404)); +#530404 = SURFACE_STYLE_USAGE(.BOTH.,#530405); +#530405 = SURFACE_SIDE_STYLE('',(#530406)); +#530406 = SURFACE_STYLE_FILL_AREA(#530407); +#530407 = FILL_AREA_STYLE('',(#530408)); +#530408 = FILL_AREA_STYLE_COLOUR('',#517768); +#530409 = OVER_RIDING_STYLED_ITEM('overriding color',(#530410),#58837, + #530337); +#530410 = PRESENTATION_STYLE_ASSIGNMENT((#530411)); +#530411 = SURFACE_STYLE_USAGE(.BOTH.,#530412); +#530412 = SURFACE_SIDE_STYLE('',(#530413)); +#530413 = SURFACE_STYLE_FILL_AREA(#530414); +#530414 = FILL_AREA_STYLE('',(#530415)); +#530415 = FILL_AREA_STYLE_COLOUR('',#517768); +#530416 = OVER_RIDING_STYLED_ITEM('overriding color',(#530417),#58854, + #530337); +#530417 = PRESENTATION_STYLE_ASSIGNMENT((#530418)); +#530418 = SURFACE_STYLE_USAGE(.BOTH.,#530419); +#530419 = SURFACE_SIDE_STYLE('',(#530420)); +#530420 = SURFACE_STYLE_FILL_AREA(#530421); +#530421 = FILL_AREA_STYLE('',(#530422)); +#530422 = FILL_AREA_STYLE_COLOUR('',#517768); +#530423 = OVER_RIDING_STYLED_ITEM('overriding color',(#530424),#58883, + #530337); +#530424 = PRESENTATION_STYLE_ASSIGNMENT((#530425)); +#530425 = SURFACE_STYLE_USAGE(.BOTH.,#530426); +#530426 = SURFACE_SIDE_STYLE('',(#530427)); +#530427 = SURFACE_STYLE_FILL_AREA(#530428); +#530428 = FILL_AREA_STYLE('',(#530429)); +#530429 = FILL_AREA_STYLE_COLOUR('',#517768); +#530430 = OVER_RIDING_STYLED_ITEM('overriding color',(#530431),#58907, + #530337); +#530431 = PRESENTATION_STYLE_ASSIGNMENT((#530432)); +#530432 = SURFACE_STYLE_USAGE(.BOTH.,#530433); +#530433 = SURFACE_SIDE_STYLE('',(#530434)); +#530434 = SURFACE_STYLE_FILL_AREA(#530435); +#530435 = FILL_AREA_STYLE('',(#530436)); +#530436 = FILL_AREA_STYLE_COLOUR('',#517768); +#530437 = OVER_RIDING_STYLED_ITEM('overriding color',(#530438),#58933, + #530337); +#530438 = PRESENTATION_STYLE_ASSIGNMENT((#530439)); +#530439 = SURFACE_STYLE_USAGE(.BOTH.,#530440); +#530440 = SURFACE_SIDE_STYLE('',(#530441)); +#530441 = SURFACE_STYLE_FILL_AREA(#530442); +#530442 = FILL_AREA_STYLE('',(#530443)); +#530443 = FILL_AREA_STYLE_COLOUR('',#517768); +#530444 = OVER_RIDING_STYLED_ITEM('overriding color',(#530445),#58957, + #530337); +#530445 = PRESENTATION_STYLE_ASSIGNMENT((#530446)); +#530446 = SURFACE_STYLE_USAGE(.BOTH.,#530447); +#530447 = SURFACE_SIDE_STYLE('',(#530448)); +#530448 = SURFACE_STYLE_FILL_AREA(#530449); +#530449 = FILL_AREA_STYLE('',(#530450)); +#530450 = FILL_AREA_STYLE_COLOUR('',#517768); +#530451 = OVER_RIDING_STYLED_ITEM('overriding color',(#530452),#58984, + #530337); +#530452 = PRESENTATION_STYLE_ASSIGNMENT((#530453)); +#530453 = SURFACE_STYLE_USAGE(.BOTH.,#530454); +#530454 = SURFACE_SIDE_STYLE('',(#530455)); +#530455 = SURFACE_STYLE_FILL_AREA(#530456); +#530456 = FILL_AREA_STYLE('',(#530457)); +#530457 = FILL_AREA_STYLE_COLOUR('',#517768); +#530458 = OVER_RIDING_STYLED_ITEM('overriding color',(#530459),#58996, + #530337); +#530459 = PRESENTATION_STYLE_ASSIGNMENT((#530460)); +#530460 = SURFACE_STYLE_USAGE(.BOTH.,#530461); +#530461 = SURFACE_SIDE_STYLE('',(#530462)); +#530462 = SURFACE_STYLE_FILL_AREA(#530463); +#530463 = FILL_AREA_STYLE('',(#530464)); +#530464 = FILL_AREA_STYLE_COLOUR('',#517768); +#530465 = OVER_RIDING_STYLED_ITEM('overriding color',(#530466),#59013, + #530337); +#530466 = PRESENTATION_STYLE_ASSIGNMENT((#530467)); +#530467 = SURFACE_STYLE_USAGE(.BOTH.,#530468); +#530468 = SURFACE_SIDE_STYLE('',(#530469)); +#530469 = SURFACE_STYLE_FILL_AREA(#530470); +#530470 = FILL_AREA_STYLE('',(#530471)); +#530471 = FILL_AREA_STYLE_COLOUR('',#517768); +#530472 = STYLED_ITEM('color',(#530473),#59025); +#530473 = PRESENTATION_STYLE_ASSIGNMENT((#530474,#530479)); +#530474 = SURFACE_STYLE_USAGE(.BOTH.,#530475); +#530475 = SURFACE_SIDE_STYLE('',(#530476)); +#530476 = SURFACE_STYLE_FILL_AREA(#530477); +#530477 = FILL_AREA_STYLE('',(#530478)); +#530478 = FILL_AREA_STYLE_COLOUR('',#523837); +#530479 = CURVE_STYLE('',#530480,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530481 = OVER_RIDING_STYLED_ITEM('overriding color',(#530482),#59027, + #530472); +#530482 = PRESENTATION_STYLE_ASSIGNMENT((#530483)); +#530483 = SURFACE_STYLE_USAGE(.BOTH.,#530484); +#530484 = SURFACE_SIDE_STYLE('',(#530485)); +#530485 = SURFACE_STYLE_FILL_AREA(#530486); +#530486 = FILL_AREA_STYLE('',(#530487)); +#530487 = FILL_AREA_STYLE_COLOUR('',#517768); +#530488 = OVER_RIDING_STYLED_ITEM('overriding color',(#530489),#59067, + #530472); +#530489 = PRESENTATION_STYLE_ASSIGNMENT((#530490)); +#530490 = SURFACE_STYLE_USAGE(.BOTH.,#530491); +#530491 = SURFACE_SIDE_STYLE('',(#530492)); +#530492 = SURFACE_STYLE_FILL_AREA(#530493); +#530493 = FILL_AREA_STYLE('',(#530494)); +#530494 = FILL_AREA_STYLE_COLOUR('',#517768); +#530495 = OVER_RIDING_STYLED_ITEM('overriding color',(#530496),#59098, + #530472); +#530496 = PRESENTATION_STYLE_ASSIGNMENT((#530497)); +#530497 = SURFACE_STYLE_USAGE(.BOTH.,#530498); +#530498 = SURFACE_SIDE_STYLE('',(#530499)); +#530499 = SURFACE_STYLE_FILL_AREA(#530500); +#530500 = FILL_AREA_STYLE('',(#530501)); +#530501 = FILL_AREA_STYLE_COLOUR('',#517768); +#530502 = OVER_RIDING_STYLED_ITEM('overriding color',(#530503),#59129, + #530472); +#530503 = PRESENTATION_STYLE_ASSIGNMENT((#530504)); +#530504 = SURFACE_STYLE_USAGE(.BOTH.,#530505); +#530505 = SURFACE_SIDE_STYLE('',(#530506)); +#530506 = SURFACE_STYLE_FILL_AREA(#530507); +#530507 = FILL_AREA_STYLE('',(#530508)); +#530508 = FILL_AREA_STYLE_COLOUR('',#517768); +#530509 = OVER_RIDING_STYLED_ITEM('overriding color',(#530510),#59179, + #530472); +#530510 = PRESENTATION_STYLE_ASSIGNMENT((#530511)); +#530511 = SURFACE_STYLE_USAGE(.BOTH.,#530512); +#530512 = SURFACE_SIDE_STYLE('',(#530513)); +#530513 = SURFACE_STYLE_FILL_AREA(#530514); +#530514 = FILL_AREA_STYLE('',(#530515)); +#530515 = FILL_AREA_STYLE_COLOUR('',#517768); +#530516 = OVER_RIDING_STYLED_ITEM('overriding color',(#530517),#59210, + #530472); +#530517 = PRESENTATION_STYLE_ASSIGNMENT((#530518)); +#530518 = SURFACE_STYLE_USAGE(.BOTH.,#530519); +#530519 = SURFACE_SIDE_STYLE('',(#530520)); +#530520 = SURFACE_STYLE_FILL_AREA(#530521); +#530521 = FILL_AREA_STYLE('',(#530522)); +#530522 = FILL_AREA_STYLE_COLOUR('',#517768); +#530523 = OVER_RIDING_STYLED_ITEM('overriding color',(#530524),#59243, + #530472); +#530524 = PRESENTATION_STYLE_ASSIGNMENT((#530525)); +#530525 = SURFACE_STYLE_USAGE(.BOTH.,#530526); +#530526 = SURFACE_SIDE_STYLE('',(#530527)); +#530527 = SURFACE_STYLE_FILL_AREA(#530528); +#530528 = FILL_AREA_STYLE('',(#530529)); +#530529 = FILL_AREA_STYLE_COLOUR('',#517768); +#530530 = OVER_RIDING_STYLED_ITEM('overriding color',(#530531),#59260, + #530472); +#530531 = PRESENTATION_STYLE_ASSIGNMENT((#530532)); +#530532 = SURFACE_STYLE_USAGE(.BOTH.,#530533); +#530533 = SURFACE_SIDE_STYLE('',(#530534)); +#530534 = SURFACE_STYLE_FILL_AREA(#530535); +#530535 = FILL_AREA_STYLE('',(#530536)); +#530536 = FILL_AREA_STYLE_COLOUR('',#517768); +#530537 = OVER_RIDING_STYLED_ITEM('overriding color',(#530538),#59284, + #530472); +#530538 = PRESENTATION_STYLE_ASSIGNMENT((#530539)); +#530539 = SURFACE_STYLE_USAGE(.BOTH.,#530540); +#530540 = SURFACE_SIDE_STYLE('',(#530541)); +#530541 = SURFACE_STYLE_FILL_AREA(#530542); +#530542 = FILL_AREA_STYLE('',(#530543)); +#530543 = FILL_AREA_STYLE_COLOUR('',#517768); +#530544 = OVER_RIDING_STYLED_ITEM('overriding color',(#530545),#59315, + #530472); +#530545 = PRESENTATION_STYLE_ASSIGNMENT((#530546)); +#530546 = SURFACE_STYLE_USAGE(.BOTH.,#530547); +#530547 = SURFACE_SIDE_STYLE('',(#530548)); +#530548 = SURFACE_STYLE_FILL_AREA(#530549); +#530549 = FILL_AREA_STYLE('',(#530550)); +#530550 = FILL_AREA_STYLE_COLOUR('',#517768); +#530551 = OVER_RIDING_STYLED_ITEM('overriding color',(#530552),#59332, + #530472); +#530552 = PRESENTATION_STYLE_ASSIGNMENT((#530553)); +#530553 = SURFACE_STYLE_USAGE(.BOTH.,#530554); +#530554 = SURFACE_SIDE_STYLE('',(#530555)); +#530555 = SURFACE_STYLE_FILL_AREA(#530556); +#530556 = FILL_AREA_STYLE('',(#530557)); +#530557 = FILL_AREA_STYLE_COLOUR('',#517768); +#530558 = OVER_RIDING_STYLED_ITEM('overriding color',(#530559),#59361, + #530472); +#530559 = PRESENTATION_STYLE_ASSIGNMENT((#530560)); +#530560 = SURFACE_STYLE_USAGE(.BOTH.,#530561); +#530561 = SURFACE_SIDE_STYLE('',(#530562)); +#530562 = SURFACE_STYLE_FILL_AREA(#530563); +#530563 = FILL_AREA_STYLE('',(#530564)); +#530564 = FILL_AREA_STYLE_COLOUR('',#517768); +#530565 = OVER_RIDING_STYLED_ITEM('overriding color',(#530566),#59385, + #530472); +#530566 = PRESENTATION_STYLE_ASSIGNMENT((#530567)); +#530567 = SURFACE_STYLE_USAGE(.BOTH.,#530568); +#530568 = SURFACE_SIDE_STYLE('',(#530569)); +#530569 = SURFACE_STYLE_FILL_AREA(#530570); +#530570 = FILL_AREA_STYLE('',(#530571)); +#530571 = FILL_AREA_STYLE_COLOUR('',#517768); +#530572 = OVER_RIDING_STYLED_ITEM('overriding color',(#530573),#59411, + #530472); +#530573 = PRESENTATION_STYLE_ASSIGNMENT((#530574)); +#530574 = SURFACE_STYLE_USAGE(.BOTH.,#530575); +#530575 = SURFACE_SIDE_STYLE('',(#530576)); +#530576 = SURFACE_STYLE_FILL_AREA(#530577); +#530577 = FILL_AREA_STYLE('',(#530578)); +#530578 = FILL_AREA_STYLE_COLOUR('',#517768); +#530579 = OVER_RIDING_STYLED_ITEM('overriding color',(#530580),#59435, + #530472); +#530580 = PRESENTATION_STYLE_ASSIGNMENT((#530581)); +#530581 = SURFACE_STYLE_USAGE(.BOTH.,#530582); +#530582 = SURFACE_SIDE_STYLE('',(#530583)); +#530583 = SURFACE_STYLE_FILL_AREA(#530584); +#530584 = FILL_AREA_STYLE('',(#530585)); +#530585 = FILL_AREA_STYLE_COLOUR('',#517768); +#530586 = OVER_RIDING_STYLED_ITEM('overriding color',(#530587),#59462, + #530472); +#530587 = PRESENTATION_STYLE_ASSIGNMENT((#530588)); +#530588 = SURFACE_STYLE_USAGE(.BOTH.,#530589); +#530589 = SURFACE_SIDE_STYLE('',(#530590)); +#530590 = SURFACE_STYLE_FILL_AREA(#530591); +#530591 = FILL_AREA_STYLE('',(#530592)); +#530592 = FILL_AREA_STYLE_COLOUR('',#517768); +#530593 = OVER_RIDING_STYLED_ITEM('overriding color',(#530594),#59474, + #530472); +#530594 = PRESENTATION_STYLE_ASSIGNMENT((#530595)); +#530595 = SURFACE_STYLE_USAGE(.BOTH.,#530596); +#530596 = SURFACE_SIDE_STYLE('',(#530597)); +#530597 = SURFACE_STYLE_FILL_AREA(#530598); +#530598 = FILL_AREA_STYLE('',(#530599)); +#530599 = FILL_AREA_STYLE_COLOUR('',#517768); +#530600 = OVER_RIDING_STYLED_ITEM('overriding color',(#530601),#59491, + #530472); +#530601 = PRESENTATION_STYLE_ASSIGNMENT((#530602)); +#530602 = SURFACE_STYLE_USAGE(.BOTH.,#530603); +#530603 = SURFACE_SIDE_STYLE('',(#530604)); +#530604 = SURFACE_STYLE_FILL_AREA(#530605); +#530605 = FILL_AREA_STYLE('',(#530606)); +#530606 = FILL_AREA_STYLE_COLOUR('',#517768); +#530607 = STYLED_ITEM('color',(#530608),#59503); +#530608 = PRESENTATION_STYLE_ASSIGNMENT((#530609,#530614)); +#530609 = SURFACE_STYLE_USAGE(.BOTH.,#530610); +#530610 = SURFACE_SIDE_STYLE('',(#530611)); +#530611 = SURFACE_STYLE_FILL_AREA(#530612); +#530612 = FILL_AREA_STYLE('',(#530613)); +#530613 = FILL_AREA_STYLE_COLOUR('',#523837); +#530614 = CURVE_STYLE('',#530615,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530616 = OVER_RIDING_STYLED_ITEM('overriding color',(#530617),#59505, + #530607); +#530617 = PRESENTATION_STYLE_ASSIGNMENT((#530618)); +#530618 = SURFACE_STYLE_USAGE(.BOTH.,#530619); +#530619 = SURFACE_SIDE_STYLE('',(#530620)); +#530620 = SURFACE_STYLE_FILL_AREA(#530621); +#530621 = FILL_AREA_STYLE('',(#530622)); +#530622 = FILL_AREA_STYLE_COLOUR('',#517768); +#530623 = OVER_RIDING_STYLED_ITEM('overriding color',(#530624),#59545, + #530607); +#530624 = PRESENTATION_STYLE_ASSIGNMENT((#530625)); +#530625 = SURFACE_STYLE_USAGE(.BOTH.,#530626); +#530626 = SURFACE_SIDE_STYLE('',(#530627)); +#530627 = SURFACE_STYLE_FILL_AREA(#530628); +#530628 = FILL_AREA_STYLE('',(#530629)); +#530629 = FILL_AREA_STYLE_COLOUR('',#517768); +#530630 = OVER_RIDING_STYLED_ITEM('overriding color',(#530631),#59576, + #530607); +#530631 = PRESENTATION_STYLE_ASSIGNMENT((#530632)); +#530632 = SURFACE_STYLE_USAGE(.BOTH.,#530633); +#530633 = SURFACE_SIDE_STYLE('',(#530634)); +#530634 = SURFACE_STYLE_FILL_AREA(#530635); +#530635 = FILL_AREA_STYLE('',(#530636)); +#530636 = FILL_AREA_STYLE_COLOUR('',#517768); +#530637 = OVER_RIDING_STYLED_ITEM('overriding color',(#530638),#59607, + #530607); +#530638 = PRESENTATION_STYLE_ASSIGNMENT((#530639)); +#530639 = SURFACE_STYLE_USAGE(.BOTH.,#530640); +#530640 = SURFACE_SIDE_STYLE('',(#530641)); +#530641 = SURFACE_STYLE_FILL_AREA(#530642); +#530642 = FILL_AREA_STYLE('',(#530643)); +#530643 = FILL_AREA_STYLE_COLOUR('',#517768); +#530644 = OVER_RIDING_STYLED_ITEM('overriding color',(#530645),#59657, + #530607); +#530645 = PRESENTATION_STYLE_ASSIGNMENT((#530646)); +#530646 = SURFACE_STYLE_USAGE(.BOTH.,#530647); +#530647 = SURFACE_SIDE_STYLE('',(#530648)); +#530648 = SURFACE_STYLE_FILL_AREA(#530649); +#530649 = FILL_AREA_STYLE('',(#530650)); +#530650 = FILL_AREA_STYLE_COLOUR('',#517768); +#530651 = OVER_RIDING_STYLED_ITEM('overriding color',(#530652),#59688, + #530607); +#530652 = PRESENTATION_STYLE_ASSIGNMENT((#530653)); +#530653 = SURFACE_STYLE_USAGE(.BOTH.,#530654); +#530654 = SURFACE_SIDE_STYLE('',(#530655)); +#530655 = SURFACE_STYLE_FILL_AREA(#530656); +#530656 = FILL_AREA_STYLE('',(#530657)); +#530657 = FILL_AREA_STYLE_COLOUR('',#517768); +#530658 = OVER_RIDING_STYLED_ITEM('overriding color',(#530659),#59721, + #530607); +#530659 = PRESENTATION_STYLE_ASSIGNMENT((#530660)); +#530660 = SURFACE_STYLE_USAGE(.BOTH.,#530661); +#530661 = SURFACE_SIDE_STYLE('',(#530662)); +#530662 = SURFACE_STYLE_FILL_AREA(#530663); +#530663 = FILL_AREA_STYLE('',(#530664)); +#530664 = FILL_AREA_STYLE_COLOUR('',#517768); +#530665 = OVER_RIDING_STYLED_ITEM('overriding color',(#530666),#59738, + #530607); +#530666 = PRESENTATION_STYLE_ASSIGNMENT((#530667)); +#530667 = SURFACE_STYLE_USAGE(.BOTH.,#530668); +#530668 = SURFACE_SIDE_STYLE('',(#530669)); +#530669 = SURFACE_STYLE_FILL_AREA(#530670); +#530670 = FILL_AREA_STYLE('',(#530671)); +#530671 = FILL_AREA_STYLE_COLOUR('',#517768); +#530672 = OVER_RIDING_STYLED_ITEM('overriding color',(#530673),#59762, + #530607); +#530673 = PRESENTATION_STYLE_ASSIGNMENT((#530674)); +#530674 = SURFACE_STYLE_USAGE(.BOTH.,#530675); +#530675 = SURFACE_SIDE_STYLE('',(#530676)); +#530676 = SURFACE_STYLE_FILL_AREA(#530677); +#530677 = FILL_AREA_STYLE('',(#530678)); +#530678 = FILL_AREA_STYLE_COLOUR('',#517768); +#530679 = OVER_RIDING_STYLED_ITEM('overriding color',(#530680),#59793, + #530607); +#530680 = PRESENTATION_STYLE_ASSIGNMENT((#530681)); +#530681 = SURFACE_STYLE_USAGE(.BOTH.,#530682); +#530682 = SURFACE_SIDE_STYLE('',(#530683)); +#530683 = SURFACE_STYLE_FILL_AREA(#530684); +#530684 = FILL_AREA_STYLE('',(#530685)); +#530685 = FILL_AREA_STYLE_COLOUR('',#517768); +#530686 = OVER_RIDING_STYLED_ITEM('overriding color',(#530687),#59810, + #530607); +#530687 = PRESENTATION_STYLE_ASSIGNMENT((#530688)); +#530688 = SURFACE_STYLE_USAGE(.BOTH.,#530689); +#530689 = SURFACE_SIDE_STYLE('',(#530690)); +#530690 = SURFACE_STYLE_FILL_AREA(#530691); +#530691 = FILL_AREA_STYLE('',(#530692)); +#530692 = FILL_AREA_STYLE_COLOUR('',#517768); +#530693 = OVER_RIDING_STYLED_ITEM('overriding color',(#530694),#59839, + #530607); +#530694 = PRESENTATION_STYLE_ASSIGNMENT((#530695)); +#530695 = SURFACE_STYLE_USAGE(.BOTH.,#530696); +#530696 = SURFACE_SIDE_STYLE('',(#530697)); +#530697 = SURFACE_STYLE_FILL_AREA(#530698); +#530698 = FILL_AREA_STYLE('',(#530699)); +#530699 = FILL_AREA_STYLE_COLOUR('',#517768); +#530700 = OVER_RIDING_STYLED_ITEM('overriding color',(#530701),#59863, + #530607); +#530701 = PRESENTATION_STYLE_ASSIGNMENT((#530702)); +#530702 = SURFACE_STYLE_USAGE(.BOTH.,#530703); +#530703 = SURFACE_SIDE_STYLE('',(#530704)); +#530704 = SURFACE_STYLE_FILL_AREA(#530705); +#530705 = FILL_AREA_STYLE('',(#530706)); +#530706 = FILL_AREA_STYLE_COLOUR('',#517768); +#530707 = OVER_RIDING_STYLED_ITEM('overriding color',(#530708),#59889, + #530607); +#530708 = PRESENTATION_STYLE_ASSIGNMENT((#530709)); +#530709 = SURFACE_STYLE_USAGE(.BOTH.,#530710); +#530710 = SURFACE_SIDE_STYLE('',(#530711)); +#530711 = SURFACE_STYLE_FILL_AREA(#530712); +#530712 = FILL_AREA_STYLE('',(#530713)); +#530713 = FILL_AREA_STYLE_COLOUR('',#517768); +#530714 = OVER_RIDING_STYLED_ITEM('overriding color',(#530715),#59913, + #530607); +#530715 = PRESENTATION_STYLE_ASSIGNMENT((#530716)); +#530716 = SURFACE_STYLE_USAGE(.BOTH.,#530717); +#530717 = SURFACE_SIDE_STYLE('',(#530718)); +#530718 = SURFACE_STYLE_FILL_AREA(#530719); +#530719 = FILL_AREA_STYLE('',(#530720)); +#530720 = FILL_AREA_STYLE_COLOUR('',#517768); +#530721 = OVER_RIDING_STYLED_ITEM('overriding color',(#530722),#59940, + #530607); +#530722 = PRESENTATION_STYLE_ASSIGNMENT((#530723)); +#530723 = SURFACE_STYLE_USAGE(.BOTH.,#530724); +#530724 = SURFACE_SIDE_STYLE('',(#530725)); +#530725 = SURFACE_STYLE_FILL_AREA(#530726); +#530726 = FILL_AREA_STYLE('',(#530727)); +#530727 = FILL_AREA_STYLE_COLOUR('',#517768); +#530728 = OVER_RIDING_STYLED_ITEM('overriding color',(#530729),#59952, + #530607); +#530729 = PRESENTATION_STYLE_ASSIGNMENT((#530730)); +#530730 = SURFACE_STYLE_USAGE(.BOTH.,#530731); +#530731 = SURFACE_SIDE_STYLE('',(#530732)); +#530732 = SURFACE_STYLE_FILL_AREA(#530733); +#530733 = FILL_AREA_STYLE('',(#530734)); +#530734 = FILL_AREA_STYLE_COLOUR('',#517768); +#530735 = OVER_RIDING_STYLED_ITEM('overriding color',(#530736),#59969, + #530607); +#530736 = PRESENTATION_STYLE_ASSIGNMENT((#530737)); +#530737 = SURFACE_STYLE_USAGE(.BOTH.,#530738); +#530738 = SURFACE_SIDE_STYLE('',(#530739)); +#530739 = SURFACE_STYLE_FILL_AREA(#530740); +#530740 = FILL_AREA_STYLE('',(#530741)); +#530741 = FILL_AREA_STYLE_COLOUR('',#517768); +#530742 = STYLED_ITEM('color',(#530743),#59981); +#530743 = PRESENTATION_STYLE_ASSIGNMENT((#530744,#530749)); +#530744 = SURFACE_STYLE_USAGE(.BOTH.,#530745); +#530745 = SURFACE_SIDE_STYLE('',(#530746)); +#530746 = SURFACE_STYLE_FILL_AREA(#530747); +#530747 = FILL_AREA_STYLE('',(#530748)); +#530748 = FILL_AREA_STYLE_COLOUR('',#523837); +#530749 = CURVE_STYLE('',#530750,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530751 = OVER_RIDING_STYLED_ITEM('overriding color',(#530752),#59983, + #530742); +#530752 = PRESENTATION_STYLE_ASSIGNMENT((#530753)); +#530753 = SURFACE_STYLE_USAGE(.BOTH.,#530754); +#530754 = SURFACE_SIDE_STYLE('',(#530755)); +#530755 = SURFACE_STYLE_FILL_AREA(#530756); +#530756 = FILL_AREA_STYLE('',(#530757)); +#530757 = FILL_AREA_STYLE_COLOUR('',#517768); +#530758 = OVER_RIDING_STYLED_ITEM('overriding color',(#530759),#60023, + #530742); +#530759 = PRESENTATION_STYLE_ASSIGNMENT((#530760)); +#530760 = SURFACE_STYLE_USAGE(.BOTH.,#530761); +#530761 = SURFACE_SIDE_STYLE('',(#530762)); +#530762 = SURFACE_STYLE_FILL_AREA(#530763); +#530763 = FILL_AREA_STYLE('',(#530764)); +#530764 = FILL_AREA_STYLE_COLOUR('',#517768); +#530765 = OVER_RIDING_STYLED_ITEM('overriding color',(#530766),#60054, + #530742); +#530766 = PRESENTATION_STYLE_ASSIGNMENT((#530767)); +#530767 = SURFACE_STYLE_USAGE(.BOTH.,#530768); +#530768 = SURFACE_SIDE_STYLE('',(#530769)); +#530769 = SURFACE_STYLE_FILL_AREA(#530770); +#530770 = FILL_AREA_STYLE('',(#530771)); +#530771 = FILL_AREA_STYLE_COLOUR('',#517768); +#530772 = OVER_RIDING_STYLED_ITEM('overriding color',(#530773),#60085, + #530742); +#530773 = PRESENTATION_STYLE_ASSIGNMENT((#530774)); +#530774 = SURFACE_STYLE_USAGE(.BOTH.,#530775); +#530775 = SURFACE_SIDE_STYLE('',(#530776)); +#530776 = SURFACE_STYLE_FILL_AREA(#530777); +#530777 = FILL_AREA_STYLE('',(#530778)); +#530778 = FILL_AREA_STYLE_COLOUR('',#517768); +#530779 = OVER_RIDING_STYLED_ITEM('overriding color',(#530780),#60135, + #530742); +#530780 = PRESENTATION_STYLE_ASSIGNMENT((#530781)); +#530781 = SURFACE_STYLE_USAGE(.BOTH.,#530782); +#530782 = SURFACE_SIDE_STYLE('',(#530783)); +#530783 = SURFACE_STYLE_FILL_AREA(#530784); +#530784 = FILL_AREA_STYLE('',(#530785)); +#530785 = FILL_AREA_STYLE_COLOUR('',#517768); +#530786 = OVER_RIDING_STYLED_ITEM('overriding color',(#530787),#60166, + #530742); +#530787 = PRESENTATION_STYLE_ASSIGNMENT((#530788)); +#530788 = SURFACE_STYLE_USAGE(.BOTH.,#530789); +#530789 = SURFACE_SIDE_STYLE('',(#530790)); +#530790 = SURFACE_STYLE_FILL_AREA(#530791); +#530791 = FILL_AREA_STYLE('',(#530792)); +#530792 = FILL_AREA_STYLE_COLOUR('',#517768); +#530793 = OVER_RIDING_STYLED_ITEM('overriding color',(#530794),#60199, + #530742); +#530794 = PRESENTATION_STYLE_ASSIGNMENT((#530795)); +#530795 = SURFACE_STYLE_USAGE(.BOTH.,#530796); +#530796 = SURFACE_SIDE_STYLE('',(#530797)); +#530797 = SURFACE_STYLE_FILL_AREA(#530798); +#530798 = FILL_AREA_STYLE('',(#530799)); +#530799 = FILL_AREA_STYLE_COLOUR('',#517768); +#530800 = OVER_RIDING_STYLED_ITEM('overriding color',(#530801),#60216, + #530742); +#530801 = PRESENTATION_STYLE_ASSIGNMENT((#530802)); +#530802 = SURFACE_STYLE_USAGE(.BOTH.,#530803); +#530803 = SURFACE_SIDE_STYLE('',(#530804)); +#530804 = SURFACE_STYLE_FILL_AREA(#530805); +#530805 = FILL_AREA_STYLE('',(#530806)); +#530806 = FILL_AREA_STYLE_COLOUR('',#517768); +#530807 = OVER_RIDING_STYLED_ITEM('overriding color',(#530808),#60240, + #530742); +#530808 = PRESENTATION_STYLE_ASSIGNMENT((#530809)); +#530809 = SURFACE_STYLE_USAGE(.BOTH.,#530810); +#530810 = SURFACE_SIDE_STYLE('',(#530811)); +#530811 = SURFACE_STYLE_FILL_AREA(#530812); +#530812 = FILL_AREA_STYLE('',(#530813)); +#530813 = FILL_AREA_STYLE_COLOUR('',#517768); +#530814 = OVER_RIDING_STYLED_ITEM('overriding color',(#530815),#60271, + #530742); +#530815 = PRESENTATION_STYLE_ASSIGNMENT((#530816)); +#530816 = SURFACE_STYLE_USAGE(.BOTH.,#530817); +#530817 = SURFACE_SIDE_STYLE('',(#530818)); +#530818 = SURFACE_STYLE_FILL_AREA(#530819); +#530819 = FILL_AREA_STYLE('',(#530820)); +#530820 = FILL_AREA_STYLE_COLOUR('',#517768); +#530821 = OVER_RIDING_STYLED_ITEM('overriding color',(#530822),#60288, + #530742); +#530822 = PRESENTATION_STYLE_ASSIGNMENT((#530823)); +#530823 = SURFACE_STYLE_USAGE(.BOTH.,#530824); +#530824 = SURFACE_SIDE_STYLE('',(#530825)); +#530825 = SURFACE_STYLE_FILL_AREA(#530826); +#530826 = FILL_AREA_STYLE('',(#530827)); +#530827 = FILL_AREA_STYLE_COLOUR('',#517768); +#530828 = OVER_RIDING_STYLED_ITEM('overriding color',(#530829),#60317, + #530742); +#530829 = PRESENTATION_STYLE_ASSIGNMENT((#530830)); +#530830 = SURFACE_STYLE_USAGE(.BOTH.,#530831); +#530831 = SURFACE_SIDE_STYLE('',(#530832)); +#530832 = SURFACE_STYLE_FILL_AREA(#530833); +#530833 = FILL_AREA_STYLE('',(#530834)); +#530834 = FILL_AREA_STYLE_COLOUR('',#517768); +#530835 = OVER_RIDING_STYLED_ITEM('overriding color',(#530836),#60341, + #530742); +#530836 = PRESENTATION_STYLE_ASSIGNMENT((#530837)); +#530837 = SURFACE_STYLE_USAGE(.BOTH.,#530838); +#530838 = SURFACE_SIDE_STYLE('',(#530839)); +#530839 = SURFACE_STYLE_FILL_AREA(#530840); +#530840 = FILL_AREA_STYLE('',(#530841)); +#530841 = FILL_AREA_STYLE_COLOUR('',#517768); +#530842 = OVER_RIDING_STYLED_ITEM('overriding color',(#530843),#60367, + #530742); +#530843 = PRESENTATION_STYLE_ASSIGNMENT((#530844)); +#530844 = SURFACE_STYLE_USAGE(.BOTH.,#530845); +#530845 = SURFACE_SIDE_STYLE('',(#530846)); +#530846 = SURFACE_STYLE_FILL_AREA(#530847); +#530847 = FILL_AREA_STYLE('',(#530848)); +#530848 = FILL_AREA_STYLE_COLOUR('',#517768); +#530849 = OVER_RIDING_STYLED_ITEM('overriding color',(#530850),#60391, + #530742); +#530850 = PRESENTATION_STYLE_ASSIGNMENT((#530851)); +#530851 = SURFACE_STYLE_USAGE(.BOTH.,#530852); +#530852 = SURFACE_SIDE_STYLE('',(#530853)); +#530853 = SURFACE_STYLE_FILL_AREA(#530854); +#530854 = FILL_AREA_STYLE('',(#530855)); +#530855 = FILL_AREA_STYLE_COLOUR('',#517768); +#530856 = OVER_RIDING_STYLED_ITEM('overriding color',(#530857),#60418, + #530742); +#530857 = PRESENTATION_STYLE_ASSIGNMENT((#530858)); +#530858 = SURFACE_STYLE_USAGE(.BOTH.,#530859); +#530859 = SURFACE_SIDE_STYLE('',(#530860)); +#530860 = SURFACE_STYLE_FILL_AREA(#530861); +#530861 = FILL_AREA_STYLE('',(#530862)); +#530862 = FILL_AREA_STYLE_COLOUR('',#517768); +#530863 = OVER_RIDING_STYLED_ITEM('overriding color',(#530864),#60430, + #530742); +#530864 = PRESENTATION_STYLE_ASSIGNMENT((#530865)); +#530865 = SURFACE_STYLE_USAGE(.BOTH.,#530866); +#530866 = SURFACE_SIDE_STYLE('',(#530867)); +#530867 = SURFACE_STYLE_FILL_AREA(#530868); +#530868 = FILL_AREA_STYLE('',(#530869)); +#530869 = FILL_AREA_STYLE_COLOUR('',#517768); +#530870 = OVER_RIDING_STYLED_ITEM('overriding color',(#530871),#60447, + #530742); +#530871 = PRESENTATION_STYLE_ASSIGNMENT((#530872)); +#530872 = SURFACE_STYLE_USAGE(.BOTH.,#530873); +#530873 = SURFACE_SIDE_STYLE('',(#530874)); +#530874 = SURFACE_STYLE_FILL_AREA(#530875); +#530875 = FILL_AREA_STYLE('',(#530876)); +#530876 = FILL_AREA_STYLE_COLOUR('',#517768); +#530877 = STYLED_ITEM('color',(#530878),#60459); +#530878 = PRESENTATION_STYLE_ASSIGNMENT((#530879,#530884)); +#530879 = SURFACE_STYLE_USAGE(.BOTH.,#530880); +#530880 = SURFACE_SIDE_STYLE('',(#530881)); +#530881 = SURFACE_STYLE_FILL_AREA(#530882); +#530882 = FILL_AREA_STYLE('',(#530883)); +#530883 = FILL_AREA_STYLE_COLOUR('',#523837); +#530884 = CURVE_STYLE('',#530885,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#530885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#530886 = OVER_RIDING_STYLED_ITEM('overriding color',(#530887),#60461, + #530877); +#530887 = PRESENTATION_STYLE_ASSIGNMENT((#530888)); +#530888 = SURFACE_STYLE_USAGE(.BOTH.,#530889); +#530889 = SURFACE_SIDE_STYLE('',(#530890)); +#530890 = SURFACE_STYLE_FILL_AREA(#530891); +#530891 = FILL_AREA_STYLE('',(#530892)); +#530892 = FILL_AREA_STYLE_COLOUR('',#517768); +#530893 = OVER_RIDING_STYLED_ITEM('overriding color',(#530894),#60501, + #530877); +#530894 = PRESENTATION_STYLE_ASSIGNMENT((#530895)); +#530895 = SURFACE_STYLE_USAGE(.BOTH.,#530896); +#530896 = SURFACE_SIDE_STYLE('',(#530897)); +#530897 = SURFACE_STYLE_FILL_AREA(#530898); +#530898 = FILL_AREA_STYLE('',(#530899)); +#530899 = FILL_AREA_STYLE_COLOUR('',#517768); +#530900 = OVER_RIDING_STYLED_ITEM('overriding color',(#530901),#60532, + #530877); +#530901 = PRESENTATION_STYLE_ASSIGNMENT((#530902)); +#530902 = SURFACE_STYLE_USAGE(.BOTH.,#530903); +#530903 = SURFACE_SIDE_STYLE('',(#530904)); +#530904 = SURFACE_STYLE_FILL_AREA(#530905); +#530905 = FILL_AREA_STYLE('',(#530906)); +#530906 = FILL_AREA_STYLE_COLOUR('',#517768); +#530907 = OVER_RIDING_STYLED_ITEM('overriding color',(#530908),#60563, + #530877); +#530908 = PRESENTATION_STYLE_ASSIGNMENT((#530909)); +#530909 = SURFACE_STYLE_USAGE(.BOTH.,#530910); +#530910 = SURFACE_SIDE_STYLE('',(#530911)); +#530911 = SURFACE_STYLE_FILL_AREA(#530912); +#530912 = FILL_AREA_STYLE('',(#530913)); +#530913 = FILL_AREA_STYLE_COLOUR('',#517768); +#530914 = OVER_RIDING_STYLED_ITEM('overriding color',(#530915),#60613, + #530877); +#530915 = PRESENTATION_STYLE_ASSIGNMENT((#530916)); +#530916 = SURFACE_STYLE_USAGE(.BOTH.,#530917); +#530917 = SURFACE_SIDE_STYLE('',(#530918)); +#530918 = SURFACE_STYLE_FILL_AREA(#530919); +#530919 = FILL_AREA_STYLE('',(#530920)); +#530920 = FILL_AREA_STYLE_COLOUR('',#517768); +#530921 = OVER_RIDING_STYLED_ITEM('overriding color',(#530922),#60644, + #530877); +#530922 = PRESENTATION_STYLE_ASSIGNMENT((#530923)); +#530923 = SURFACE_STYLE_USAGE(.BOTH.,#530924); +#530924 = SURFACE_SIDE_STYLE('',(#530925)); +#530925 = SURFACE_STYLE_FILL_AREA(#530926); +#530926 = FILL_AREA_STYLE('',(#530927)); +#530927 = FILL_AREA_STYLE_COLOUR('',#517768); +#530928 = OVER_RIDING_STYLED_ITEM('overriding color',(#530929),#60677, + #530877); +#530929 = PRESENTATION_STYLE_ASSIGNMENT((#530930)); +#530930 = SURFACE_STYLE_USAGE(.BOTH.,#530931); +#530931 = SURFACE_SIDE_STYLE('',(#530932)); +#530932 = SURFACE_STYLE_FILL_AREA(#530933); +#530933 = FILL_AREA_STYLE('',(#530934)); +#530934 = FILL_AREA_STYLE_COLOUR('',#517768); +#530935 = OVER_RIDING_STYLED_ITEM('overriding color',(#530936),#60694, + #530877); +#530936 = PRESENTATION_STYLE_ASSIGNMENT((#530937)); +#530937 = SURFACE_STYLE_USAGE(.BOTH.,#530938); +#530938 = SURFACE_SIDE_STYLE('',(#530939)); +#530939 = SURFACE_STYLE_FILL_AREA(#530940); +#530940 = FILL_AREA_STYLE('',(#530941)); +#530941 = FILL_AREA_STYLE_COLOUR('',#517768); +#530942 = OVER_RIDING_STYLED_ITEM('overriding color',(#530943),#60718, + #530877); +#530943 = PRESENTATION_STYLE_ASSIGNMENT((#530944)); +#530944 = SURFACE_STYLE_USAGE(.BOTH.,#530945); +#530945 = SURFACE_SIDE_STYLE('',(#530946)); +#530946 = SURFACE_STYLE_FILL_AREA(#530947); +#530947 = FILL_AREA_STYLE('',(#530948)); +#530948 = FILL_AREA_STYLE_COLOUR('',#517768); +#530949 = OVER_RIDING_STYLED_ITEM('overriding color',(#530950),#60749, + #530877); +#530950 = PRESENTATION_STYLE_ASSIGNMENT((#530951)); +#530951 = SURFACE_STYLE_USAGE(.BOTH.,#530952); +#530952 = SURFACE_SIDE_STYLE('',(#530953)); +#530953 = SURFACE_STYLE_FILL_AREA(#530954); +#530954 = FILL_AREA_STYLE('',(#530955)); +#530955 = FILL_AREA_STYLE_COLOUR('',#517768); +#530956 = OVER_RIDING_STYLED_ITEM('overriding color',(#530957),#60766, + #530877); +#530957 = PRESENTATION_STYLE_ASSIGNMENT((#530958)); +#530958 = SURFACE_STYLE_USAGE(.BOTH.,#530959); +#530959 = SURFACE_SIDE_STYLE('',(#530960)); +#530960 = SURFACE_STYLE_FILL_AREA(#530961); +#530961 = FILL_AREA_STYLE('',(#530962)); +#530962 = FILL_AREA_STYLE_COLOUR('',#517768); +#530963 = OVER_RIDING_STYLED_ITEM('overriding color',(#530964),#60795, + #530877); +#530964 = PRESENTATION_STYLE_ASSIGNMENT((#530965)); +#530965 = SURFACE_STYLE_USAGE(.BOTH.,#530966); +#530966 = SURFACE_SIDE_STYLE('',(#530967)); +#530967 = SURFACE_STYLE_FILL_AREA(#530968); +#530968 = FILL_AREA_STYLE('',(#530969)); +#530969 = FILL_AREA_STYLE_COLOUR('',#517768); +#530970 = OVER_RIDING_STYLED_ITEM('overriding color',(#530971),#60819, + #530877); +#530971 = PRESENTATION_STYLE_ASSIGNMENT((#530972)); +#530972 = SURFACE_STYLE_USAGE(.BOTH.,#530973); +#530973 = SURFACE_SIDE_STYLE('',(#530974)); +#530974 = SURFACE_STYLE_FILL_AREA(#530975); +#530975 = FILL_AREA_STYLE('',(#530976)); +#530976 = FILL_AREA_STYLE_COLOUR('',#517768); +#530977 = OVER_RIDING_STYLED_ITEM('overriding color',(#530978),#60845, + #530877); +#530978 = PRESENTATION_STYLE_ASSIGNMENT((#530979)); +#530979 = SURFACE_STYLE_USAGE(.BOTH.,#530980); +#530980 = SURFACE_SIDE_STYLE('',(#530981)); +#530981 = SURFACE_STYLE_FILL_AREA(#530982); +#530982 = FILL_AREA_STYLE('',(#530983)); +#530983 = FILL_AREA_STYLE_COLOUR('',#517768); +#530984 = OVER_RIDING_STYLED_ITEM('overriding color',(#530985),#60869, + #530877); +#530985 = PRESENTATION_STYLE_ASSIGNMENT((#530986)); +#530986 = SURFACE_STYLE_USAGE(.BOTH.,#530987); +#530987 = SURFACE_SIDE_STYLE('',(#530988)); +#530988 = SURFACE_STYLE_FILL_AREA(#530989); +#530989 = FILL_AREA_STYLE('',(#530990)); +#530990 = FILL_AREA_STYLE_COLOUR('',#517768); +#530991 = OVER_RIDING_STYLED_ITEM('overriding color',(#530992),#60896, + #530877); +#530992 = PRESENTATION_STYLE_ASSIGNMENT((#530993)); +#530993 = SURFACE_STYLE_USAGE(.BOTH.,#530994); +#530994 = SURFACE_SIDE_STYLE('',(#530995)); +#530995 = SURFACE_STYLE_FILL_AREA(#530996); +#530996 = FILL_AREA_STYLE('',(#530997)); +#530997 = FILL_AREA_STYLE_COLOUR('',#517768); +#530998 = OVER_RIDING_STYLED_ITEM('overriding color',(#530999),#60908, + #530877); +#530999 = PRESENTATION_STYLE_ASSIGNMENT((#531000)); +#531000 = SURFACE_STYLE_USAGE(.BOTH.,#531001); +#531001 = SURFACE_SIDE_STYLE('',(#531002)); +#531002 = SURFACE_STYLE_FILL_AREA(#531003); +#531003 = FILL_AREA_STYLE('',(#531004)); +#531004 = FILL_AREA_STYLE_COLOUR('',#517768); +#531005 = OVER_RIDING_STYLED_ITEM('overriding color',(#531006),#60925, + #530877); +#531006 = PRESENTATION_STYLE_ASSIGNMENT((#531007)); +#531007 = SURFACE_STYLE_USAGE(.BOTH.,#531008); +#531008 = SURFACE_SIDE_STYLE('',(#531009)); +#531009 = SURFACE_STYLE_FILL_AREA(#531010); +#531010 = FILL_AREA_STYLE('',(#531011)); +#531011 = FILL_AREA_STYLE_COLOUR('',#517768); +#531012 = STYLED_ITEM('color',(#531013),#60937); +#531013 = PRESENTATION_STYLE_ASSIGNMENT((#531014,#531019)); +#531014 = SURFACE_STYLE_USAGE(.BOTH.,#531015); +#531015 = SURFACE_SIDE_STYLE('',(#531016)); +#531016 = SURFACE_STYLE_FILL_AREA(#531017); +#531017 = FILL_AREA_STYLE('',(#531018)); +#531018 = FILL_AREA_STYLE_COLOUR('',#523837); +#531019 = CURVE_STYLE('',#531020,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531021 = OVER_RIDING_STYLED_ITEM('overriding color',(#531022),#60939, + #531012); +#531022 = PRESENTATION_STYLE_ASSIGNMENT((#531023)); +#531023 = SURFACE_STYLE_USAGE(.BOTH.,#531024); +#531024 = SURFACE_SIDE_STYLE('',(#531025)); +#531025 = SURFACE_STYLE_FILL_AREA(#531026); +#531026 = FILL_AREA_STYLE('',(#531027)); +#531027 = FILL_AREA_STYLE_COLOUR('',#517768); +#531028 = OVER_RIDING_STYLED_ITEM('overriding color',(#531029),#60979, + #531012); +#531029 = PRESENTATION_STYLE_ASSIGNMENT((#531030)); +#531030 = SURFACE_STYLE_USAGE(.BOTH.,#531031); +#531031 = SURFACE_SIDE_STYLE('',(#531032)); +#531032 = SURFACE_STYLE_FILL_AREA(#531033); +#531033 = FILL_AREA_STYLE('',(#531034)); +#531034 = FILL_AREA_STYLE_COLOUR('',#517768); +#531035 = OVER_RIDING_STYLED_ITEM('overriding color',(#531036),#61010, + #531012); +#531036 = PRESENTATION_STYLE_ASSIGNMENT((#531037)); +#531037 = SURFACE_STYLE_USAGE(.BOTH.,#531038); +#531038 = SURFACE_SIDE_STYLE('',(#531039)); +#531039 = SURFACE_STYLE_FILL_AREA(#531040); +#531040 = FILL_AREA_STYLE('',(#531041)); +#531041 = FILL_AREA_STYLE_COLOUR('',#517768); +#531042 = OVER_RIDING_STYLED_ITEM('overriding color',(#531043),#61041, + #531012); +#531043 = PRESENTATION_STYLE_ASSIGNMENT((#531044)); +#531044 = SURFACE_STYLE_USAGE(.BOTH.,#531045); +#531045 = SURFACE_SIDE_STYLE('',(#531046)); +#531046 = SURFACE_STYLE_FILL_AREA(#531047); +#531047 = FILL_AREA_STYLE('',(#531048)); +#531048 = FILL_AREA_STYLE_COLOUR('',#517768); +#531049 = OVER_RIDING_STYLED_ITEM('overriding color',(#531050),#61091, + #531012); +#531050 = PRESENTATION_STYLE_ASSIGNMENT((#531051)); +#531051 = SURFACE_STYLE_USAGE(.BOTH.,#531052); +#531052 = SURFACE_SIDE_STYLE('',(#531053)); +#531053 = SURFACE_STYLE_FILL_AREA(#531054); +#531054 = FILL_AREA_STYLE('',(#531055)); +#531055 = FILL_AREA_STYLE_COLOUR('',#517768); +#531056 = OVER_RIDING_STYLED_ITEM('overriding color',(#531057),#61122, + #531012); +#531057 = PRESENTATION_STYLE_ASSIGNMENT((#531058)); +#531058 = SURFACE_STYLE_USAGE(.BOTH.,#531059); +#531059 = SURFACE_SIDE_STYLE('',(#531060)); +#531060 = SURFACE_STYLE_FILL_AREA(#531061); +#531061 = FILL_AREA_STYLE('',(#531062)); +#531062 = FILL_AREA_STYLE_COLOUR('',#517768); +#531063 = OVER_RIDING_STYLED_ITEM('overriding color',(#531064),#61155, + #531012); +#531064 = PRESENTATION_STYLE_ASSIGNMENT((#531065)); +#531065 = SURFACE_STYLE_USAGE(.BOTH.,#531066); +#531066 = SURFACE_SIDE_STYLE('',(#531067)); +#531067 = SURFACE_STYLE_FILL_AREA(#531068); +#531068 = FILL_AREA_STYLE('',(#531069)); +#531069 = FILL_AREA_STYLE_COLOUR('',#517768); +#531070 = OVER_RIDING_STYLED_ITEM('overriding color',(#531071),#61172, + #531012); +#531071 = PRESENTATION_STYLE_ASSIGNMENT((#531072)); +#531072 = SURFACE_STYLE_USAGE(.BOTH.,#531073); +#531073 = SURFACE_SIDE_STYLE('',(#531074)); +#531074 = SURFACE_STYLE_FILL_AREA(#531075); +#531075 = FILL_AREA_STYLE('',(#531076)); +#531076 = FILL_AREA_STYLE_COLOUR('',#517768); +#531077 = OVER_RIDING_STYLED_ITEM('overriding color',(#531078),#61196, + #531012); +#531078 = PRESENTATION_STYLE_ASSIGNMENT((#531079)); +#531079 = SURFACE_STYLE_USAGE(.BOTH.,#531080); +#531080 = SURFACE_SIDE_STYLE('',(#531081)); +#531081 = SURFACE_STYLE_FILL_AREA(#531082); +#531082 = FILL_AREA_STYLE('',(#531083)); +#531083 = FILL_AREA_STYLE_COLOUR('',#517768); +#531084 = OVER_RIDING_STYLED_ITEM('overriding color',(#531085),#61227, + #531012); +#531085 = PRESENTATION_STYLE_ASSIGNMENT((#531086)); +#531086 = SURFACE_STYLE_USAGE(.BOTH.,#531087); +#531087 = SURFACE_SIDE_STYLE('',(#531088)); +#531088 = SURFACE_STYLE_FILL_AREA(#531089); +#531089 = FILL_AREA_STYLE('',(#531090)); +#531090 = FILL_AREA_STYLE_COLOUR('',#517768); +#531091 = OVER_RIDING_STYLED_ITEM('overriding color',(#531092),#61244, + #531012); +#531092 = PRESENTATION_STYLE_ASSIGNMENT((#531093)); +#531093 = SURFACE_STYLE_USAGE(.BOTH.,#531094); +#531094 = SURFACE_SIDE_STYLE('',(#531095)); +#531095 = SURFACE_STYLE_FILL_AREA(#531096); +#531096 = FILL_AREA_STYLE('',(#531097)); +#531097 = FILL_AREA_STYLE_COLOUR('',#517768); +#531098 = OVER_RIDING_STYLED_ITEM('overriding color',(#531099),#61273, + #531012); +#531099 = PRESENTATION_STYLE_ASSIGNMENT((#531100)); +#531100 = SURFACE_STYLE_USAGE(.BOTH.,#531101); +#531101 = SURFACE_SIDE_STYLE('',(#531102)); +#531102 = SURFACE_STYLE_FILL_AREA(#531103); +#531103 = FILL_AREA_STYLE('',(#531104)); +#531104 = FILL_AREA_STYLE_COLOUR('',#517768); +#531105 = OVER_RIDING_STYLED_ITEM('overriding color',(#531106),#61297, + #531012); +#531106 = PRESENTATION_STYLE_ASSIGNMENT((#531107)); +#531107 = SURFACE_STYLE_USAGE(.BOTH.,#531108); +#531108 = SURFACE_SIDE_STYLE('',(#531109)); +#531109 = SURFACE_STYLE_FILL_AREA(#531110); +#531110 = FILL_AREA_STYLE('',(#531111)); +#531111 = FILL_AREA_STYLE_COLOUR('',#517768); +#531112 = OVER_RIDING_STYLED_ITEM('overriding color',(#531113),#61323, + #531012); +#531113 = PRESENTATION_STYLE_ASSIGNMENT((#531114)); +#531114 = SURFACE_STYLE_USAGE(.BOTH.,#531115); +#531115 = SURFACE_SIDE_STYLE('',(#531116)); +#531116 = SURFACE_STYLE_FILL_AREA(#531117); +#531117 = FILL_AREA_STYLE('',(#531118)); +#531118 = FILL_AREA_STYLE_COLOUR('',#517768); +#531119 = OVER_RIDING_STYLED_ITEM('overriding color',(#531120),#61347, + #531012); +#531120 = PRESENTATION_STYLE_ASSIGNMENT((#531121)); +#531121 = SURFACE_STYLE_USAGE(.BOTH.,#531122); +#531122 = SURFACE_SIDE_STYLE('',(#531123)); +#531123 = SURFACE_STYLE_FILL_AREA(#531124); +#531124 = FILL_AREA_STYLE('',(#531125)); +#531125 = FILL_AREA_STYLE_COLOUR('',#517768); +#531126 = OVER_RIDING_STYLED_ITEM('overriding color',(#531127),#61374, + #531012); +#531127 = PRESENTATION_STYLE_ASSIGNMENT((#531128)); +#531128 = SURFACE_STYLE_USAGE(.BOTH.,#531129); +#531129 = SURFACE_SIDE_STYLE('',(#531130)); +#531130 = SURFACE_STYLE_FILL_AREA(#531131); +#531131 = FILL_AREA_STYLE('',(#531132)); +#531132 = FILL_AREA_STYLE_COLOUR('',#517768); +#531133 = OVER_RIDING_STYLED_ITEM('overriding color',(#531134),#61386, + #531012); +#531134 = PRESENTATION_STYLE_ASSIGNMENT((#531135)); +#531135 = SURFACE_STYLE_USAGE(.BOTH.,#531136); +#531136 = SURFACE_SIDE_STYLE('',(#531137)); +#531137 = SURFACE_STYLE_FILL_AREA(#531138); +#531138 = FILL_AREA_STYLE('',(#531139)); +#531139 = FILL_AREA_STYLE_COLOUR('',#517768); +#531140 = OVER_RIDING_STYLED_ITEM('overriding color',(#531141),#61403, + #531012); +#531141 = PRESENTATION_STYLE_ASSIGNMENT((#531142)); +#531142 = SURFACE_STYLE_USAGE(.BOTH.,#531143); +#531143 = SURFACE_SIDE_STYLE('',(#531144)); +#531144 = SURFACE_STYLE_FILL_AREA(#531145); +#531145 = FILL_AREA_STYLE('',(#531146)); +#531146 = FILL_AREA_STYLE_COLOUR('',#517768); +#531147 = STYLED_ITEM('color',(#531148),#61415); +#531148 = PRESENTATION_STYLE_ASSIGNMENT((#531149,#531154)); +#531149 = SURFACE_STYLE_USAGE(.BOTH.,#531150); +#531150 = SURFACE_SIDE_STYLE('',(#531151)); +#531151 = SURFACE_STYLE_FILL_AREA(#531152); +#531152 = FILL_AREA_STYLE('',(#531153)); +#531153 = FILL_AREA_STYLE_COLOUR('',#523837); +#531154 = CURVE_STYLE('',#531155,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531156 = OVER_RIDING_STYLED_ITEM('overriding color',(#531157),#61417, + #531147); +#531157 = PRESENTATION_STYLE_ASSIGNMENT((#531158)); +#531158 = SURFACE_STYLE_USAGE(.BOTH.,#531159); +#531159 = SURFACE_SIDE_STYLE('',(#531160)); +#531160 = SURFACE_STYLE_FILL_AREA(#531161); +#531161 = FILL_AREA_STYLE('',(#531162)); +#531162 = FILL_AREA_STYLE_COLOUR('',#517768); +#531163 = OVER_RIDING_STYLED_ITEM('overriding color',(#531164),#61457, + #531147); +#531164 = PRESENTATION_STYLE_ASSIGNMENT((#531165)); +#531165 = SURFACE_STYLE_USAGE(.BOTH.,#531166); +#531166 = SURFACE_SIDE_STYLE('',(#531167)); +#531167 = SURFACE_STYLE_FILL_AREA(#531168); +#531168 = FILL_AREA_STYLE('',(#531169)); +#531169 = FILL_AREA_STYLE_COLOUR('',#517768); +#531170 = OVER_RIDING_STYLED_ITEM('overriding color',(#531171),#61488, + #531147); +#531171 = PRESENTATION_STYLE_ASSIGNMENT((#531172)); +#531172 = SURFACE_STYLE_USAGE(.BOTH.,#531173); +#531173 = SURFACE_SIDE_STYLE('',(#531174)); +#531174 = SURFACE_STYLE_FILL_AREA(#531175); +#531175 = FILL_AREA_STYLE('',(#531176)); +#531176 = FILL_AREA_STYLE_COLOUR('',#517768); +#531177 = OVER_RIDING_STYLED_ITEM('overriding color',(#531178),#61519, + #531147); +#531178 = PRESENTATION_STYLE_ASSIGNMENT((#531179)); +#531179 = SURFACE_STYLE_USAGE(.BOTH.,#531180); +#531180 = SURFACE_SIDE_STYLE('',(#531181)); +#531181 = SURFACE_STYLE_FILL_AREA(#531182); +#531182 = FILL_AREA_STYLE('',(#531183)); +#531183 = FILL_AREA_STYLE_COLOUR('',#517768); +#531184 = OVER_RIDING_STYLED_ITEM('overriding color',(#531185),#61569, + #531147); +#531185 = PRESENTATION_STYLE_ASSIGNMENT((#531186)); +#531186 = SURFACE_STYLE_USAGE(.BOTH.,#531187); +#531187 = SURFACE_SIDE_STYLE('',(#531188)); +#531188 = SURFACE_STYLE_FILL_AREA(#531189); +#531189 = FILL_AREA_STYLE('',(#531190)); +#531190 = FILL_AREA_STYLE_COLOUR('',#517768); +#531191 = OVER_RIDING_STYLED_ITEM('overriding color',(#531192),#61600, + #531147); +#531192 = PRESENTATION_STYLE_ASSIGNMENT((#531193)); +#531193 = SURFACE_STYLE_USAGE(.BOTH.,#531194); +#531194 = SURFACE_SIDE_STYLE('',(#531195)); +#531195 = SURFACE_STYLE_FILL_AREA(#531196); +#531196 = FILL_AREA_STYLE('',(#531197)); +#531197 = FILL_AREA_STYLE_COLOUR('',#517768); +#531198 = OVER_RIDING_STYLED_ITEM('overriding color',(#531199),#61633, + #531147); +#531199 = PRESENTATION_STYLE_ASSIGNMENT((#531200)); +#531200 = SURFACE_STYLE_USAGE(.BOTH.,#531201); +#531201 = SURFACE_SIDE_STYLE('',(#531202)); +#531202 = SURFACE_STYLE_FILL_AREA(#531203); +#531203 = FILL_AREA_STYLE('',(#531204)); +#531204 = FILL_AREA_STYLE_COLOUR('',#517768); +#531205 = OVER_RIDING_STYLED_ITEM('overriding color',(#531206),#61650, + #531147); +#531206 = PRESENTATION_STYLE_ASSIGNMENT((#531207)); +#531207 = SURFACE_STYLE_USAGE(.BOTH.,#531208); +#531208 = SURFACE_SIDE_STYLE('',(#531209)); +#531209 = SURFACE_STYLE_FILL_AREA(#531210); +#531210 = FILL_AREA_STYLE('',(#531211)); +#531211 = FILL_AREA_STYLE_COLOUR('',#517768); +#531212 = OVER_RIDING_STYLED_ITEM('overriding color',(#531213),#61674, + #531147); +#531213 = PRESENTATION_STYLE_ASSIGNMENT((#531214)); +#531214 = SURFACE_STYLE_USAGE(.BOTH.,#531215); +#531215 = SURFACE_SIDE_STYLE('',(#531216)); +#531216 = SURFACE_STYLE_FILL_AREA(#531217); +#531217 = FILL_AREA_STYLE('',(#531218)); +#531218 = FILL_AREA_STYLE_COLOUR('',#517768); +#531219 = OVER_RIDING_STYLED_ITEM('overriding color',(#531220),#61705, + #531147); +#531220 = PRESENTATION_STYLE_ASSIGNMENT((#531221)); +#531221 = SURFACE_STYLE_USAGE(.BOTH.,#531222); +#531222 = SURFACE_SIDE_STYLE('',(#531223)); +#531223 = SURFACE_STYLE_FILL_AREA(#531224); +#531224 = FILL_AREA_STYLE('',(#531225)); +#531225 = FILL_AREA_STYLE_COLOUR('',#517768); +#531226 = OVER_RIDING_STYLED_ITEM('overriding color',(#531227),#61722, + #531147); +#531227 = PRESENTATION_STYLE_ASSIGNMENT((#531228)); +#531228 = SURFACE_STYLE_USAGE(.BOTH.,#531229); +#531229 = SURFACE_SIDE_STYLE('',(#531230)); +#531230 = SURFACE_STYLE_FILL_AREA(#531231); +#531231 = FILL_AREA_STYLE('',(#531232)); +#531232 = FILL_AREA_STYLE_COLOUR('',#517768); +#531233 = OVER_RIDING_STYLED_ITEM('overriding color',(#531234),#61751, + #531147); +#531234 = PRESENTATION_STYLE_ASSIGNMENT((#531235)); +#531235 = SURFACE_STYLE_USAGE(.BOTH.,#531236); +#531236 = SURFACE_SIDE_STYLE('',(#531237)); +#531237 = SURFACE_STYLE_FILL_AREA(#531238); +#531238 = FILL_AREA_STYLE('',(#531239)); +#531239 = FILL_AREA_STYLE_COLOUR('',#517768); +#531240 = OVER_RIDING_STYLED_ITEM('overriding color',(#531241),#61775, + #531147); +#531241 = PRESENTATION_STYLE_ASSIGNMENT((#531242)); +#531242 = SURFACE_STYLE_USAGE(.BOTH.,#531243); +#531243 = SURFACE_SIDE_STYLE('',(#531244)); +#531244 = SURFACE_STYLE_FILL_AREA(#531245); +#531245 = FILL_AREA_STYLE('',(#531246)); +#531246 = FILL_AREA_STYLE_COLOUR('',#517768); +#531247 = OVER_RIDING_STYLED_ITEM('overriding color',(#531248),#61801, + #531147); +#531248 = PRESENTATION_STYLE_ASSIGNMENT((#531249)); +#531249 = SURFACE_STYLE_USAGE(.BOTH.,#531250); +#531250 = SURFACE_SIDE_STYLE('',(#531251)); +#531251 = SURFACE_STYLE_FILL_AREA(#531252); +#531252 = FILL_AREA_STYLE('',(#531253)); +#531253 = FILL_AREA_STYLE_COLOUR('',#517768); +#531254 = OVER_RIDING_STYLED_ITEM('overriding color',(#531255),#61825, + #531147); +#531255 = PRESENTATION_STYLE_ASSIGNMENT((#531256)); +#531256 = SURFACE_STYLE_USAGE(.BOTH.,#531257); +#531257 = SURFACE_SIDE_STYLE('',(#531258)); +#531258 = SURFACE_STYLE_FILL_AREA(#531259); +#531259 = FILL_AREA_STYLE('',(#531260)); +#531260 = FILL_AREA_STYLE_COLOUR('',#517768); +#531261 = OVER_RIDING_STYLED_ITEM('overriding color',(#531262),#61852, + #531147); +#531262 = PRESENTATION_STYLE_ASSIGNMENT((#531263)); +#531263 = SURFACE_STYLE_USAGE(.BOTH.,#531264); +#531264 = SURFACE_SIDE_STYLE('',(#531265)); +#531265 = SURFACE_STYLE_FILL_AREA(#531266); +#531266 = FILL_AREA_STYLE('',(#531267)); +#531267 = FILL_AREA_STYLE_COLOUR('',#517768); +#531268 = OVER_RIDING_STYLED_ITEM('overriding color',(#531269),#61864, + #531147); +#531269 = PRESENTATION_STYLE_ASSIGNMENT((#531270)); +#531270 = SURFACE_STYLE_USAGE(.BOTH.,#531271); +#531271 = SURFACE_SIDE_STYLE('',(#531272)); +#531272 = SURFACE_STYLE_FILL_AREA(#531273); +#531273 = FILL_AREA_STYLE('',(#531274)); +#531274 = FILL_AREA_STYLE_COLOUR('',#517768); +#531275 = OVER_RIDING_STYLED_ITEM('overriding color',(#531276),#61881, + #531147); +#531276 = PRESENTATION_STYLE_ASSIGNMENT((#531277)); +#531277 = SURFACE_STYLE_USAGE(.BOTH.,#531278); +#531278 = SURFACE_SIDE_STYLE('',(#531279)); +#531279 = SURFACE_STYLE_FILL_AREA(#531280); +#531280 = FILL_AREA_STYLE('',(#531281)); +#531281 = FILL_AREA_STYLE_COLOUR('',#517768); +#531282 = STYLED_ITEM('color',(#531283),#61893); +#531283 = PRESENTATION_STYLE_ASSIGNMENT((#531284,#531289)); +#531284 = SURFACE_STYLE_USAGE(.BOTH.,#531285); +#531285 = SURFACE_SIDE_STYLE('',(#531286)); +#531286 = SURFACE_STYLE_FILL_AREA(#531287); +#531287 = FILL_AREA_STYLE('',(#531288)); +#531288 = FILL_AREA_STYLE_COLOUR('',#523837); +#531289 = CURVE_STYLE('',#531290,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531291 = OVER_RIDING_STYLED_ITEM('overriding color',(#531292),#61895, + #531282); +#531292 = PRESENTATION_STYLE_ASSIGNMENT((#531293)); +#531293 = SURFACE_STYLE_USAGE(.BOTH.,#531294); +#531294 = SURFACE_SIDE_STYLE('',(#531295)); +#531295 = SURFACE_STYLE_FILL_AREA(#531296); +#531296 = FILL_AREA_STYLE('',(#531297)); +#531297 = FILL_AREA_STYLE_COLOUR('',#517768); +#531298 = OVER_RIDING_STYLED_ITEM('overriding color',(#531299),#61935, + #531282); +#531299 = PRESENTATION_STYLE_ASSIGNMENT((#531300)); +#531300 = SURFACE_STYLE_USAGE(.BOTH.,#531301); +#531301 = SURFACE_SIDE_STYLE('',(#531302)); +#531302 = SURFACE_STYLE_FILL_AREA(#531303); +#531303 = FILL_AREA_STYLE('',(#531304)); +#531304 = FILL_AREA_STYLE_COLOUR('',#517768); +#531305 = OVER_RIDING_STYLED_ITEM('overriding color',(#531306),#61966, + #531282); +#531306 = PRESENTATION_STYLE_ASSIGNMENT((#531307)); +#531307 = SURFACE_STYLE_USAGE(.BOTH.,#531308); +#531308 = SURFACE_SIDE_STYLE('',(#531309)); +#531309 = SURFACE_STYLE_FILL_AREA(#531310); +#531310 = FILL_AREA_STYLE('',(#531311)); +#531311 = FILL_AREA_STYLE_COLOUR('',#517768); +#531312 = OVER_RIDING_STYLED_ITEM('overriding color',(#531313),#61997, + #531282); +#531313 = PRESENTATION_STYLE_ASSIGNMENT((#531314)); +#531314 = SURFACE_STYLE_USAGE(.BOTH.,#531315); +#531315 = SURFACE_SIDE_STYLE('',(#531316)); +#531316 = SURFACE_STYLE_FILL_AREA(#531317); +#531317 = FILL_AREA_STYLE('',(#531318)); +#531318 = FILL_AREA_STYLE_COLOUR('',#517768); +#531319 = OVER_RIDING_STYLED_ITEM('overriding color',(#531320),#62047, + #531282); +#531320 = PRESENTATION_STYLE_ASSIGNMENT((#531321)); +#531321 = SURFACE_STYLE_USAGE(.BOTH.,#531322); +#531322 = SURFACE_SIDE_STYLE('',(#531323)); +#531323 = SURFACE_STYLE_FILL_AREA(#531324); +#531324 = FILL_AREA_STYLE('',(#531325)); +#531325 = FILL_AREA_STYLE_COLOUR('',#517768); +#531326 = OVER_RIDING_STYLED_ITEM('overriding color',(#531327),#62078, + #531282); +#531327 = PRESENTATION_STYLE_ASSIGNMENT((#531328)); +#531328 = SURFACE_STYLE_USAGE(.BOTH.,#531329); +#531329 = SURFACE_SIDE_STYLE('',(#531330)); +#531330 = SURFACE_STYLE_FILL_AREA(#531331); +#531331 = FILL_AREA_STYLE('',(#531332)); +#531332 = FILL_AREA_STYLE_COLOUR('',#517768); +#531333 = OVER_RIDING_STYLED_ITEM('overriding color',(#531334),#62111, + #531282); +#531334 = PRESENTATION_STYLE_ASSIGNMENT((#531335)); +#531335 = SURFACE_STYLE_USAGE(.BOTH.,#531336); +#531336 = SURFACE_SIDE_STYLE('',(#531337)); +#531337 = SURFACE_STYLE_FILL_AREA(#531338); +#531338 = FILL_AREA_STYLE('',(#531339)); +#531339 = FILL_AREA_STYLE_COLOUR('',#517768); +#531340 = OVER_RIDING_STYLED_ITEM('overriding color',(#531341),#62128, + #531282); +#531341 = PRESENTATION_STYLE_ASSIGNMENT((#531342)); +#531342 = SURFACE_STYLE_USAGE(.BOTH.,#531343); +#531343 = SURFACE_SIDE_STYLE('',(#531344)); +#531344 = SURFACE_STYLE_FILL_AREA(#531345); +#531345 = FILL_AREA_STYLE('',(#531346)); +#531346 = FILL_AREA_STYLE_COLOUR('',#517768); +#531347 = OVER_RIDING_STYLED_ITEM('overriding color',(#531348),#62152, + #531282); +#531348 = PRESENTATION_STYLE_ASSIGNMENT((#531349)); +#531349 = SURFACE_STYLE_USAGE(.BOTH.,#531350); +#531350 = SURFACE_SIDE_STYLE('',(#531351)); +#531351 = SURFACE_STYLE_FILL_AREA(#531352); +#531352 = FILL_AREA_STYLE('',(#531353)); +#531353 = FILL_AREA_STYLE_COLOUR('',#517768); +#531354 = OVER_RIDING_STYLED_ITEM('overriding color',(#531355),#62183, + #531282); +#531355 = PRESENTATION_STYLE_ASSIGNMENT((#531356)); +#531356 = SURFACE_STYLE_USAGE(.BOTH.,#531357); +#531357 = SURFACE_SIDE_STYLE('',(#531358)); +#531358 = SURFACE_STYLE_FILL_AREA(#531359); +#531359 = FILL_AREA_STYLE('',(#531360)); +#531360 = FILL_AREA_STYLE_COLOUR('',#517768); +#531361 = OVER_RIDING_STYLED_ITEM('overriding color',(#531362),#62200, + #531282); +#531362 = PRESENTATION_STYLE_ASSIGNMENT((#531363)); +#531363 = SURFACE_STYLE_USAGE(.BOTH.,#531364); +#531364 = SURFACE_SIDE_STYLE('',(#531365)); +#531365 = SURFACE_STYLE_FILL_AREA(#531366); +#531366 = FILL_AREA_STYLE('',(#531367)); +#531367 = FILL_AREA_STYLE_COLOUR('',#517768); +#531368 = OVER_RIDING_STYLED_ITEM('overriding color',(#531369),#62229, + #531282); +#531369 = PRESENTATION_STYLE_ASSIGNMENT((#531370)); +#531370 = SURFACE_STYLE_USAGE(.BOTH.,#531371); +#531371 = SURFACE_SIDE_STYLE('',(#531372)); +#531372 = SURFACE_STYLE_FILL_AREA(#531373); +#531373 = FILL_AREA_STYLE('',(#531374)); +#531374 = FILL_AREA_STYLE_COLOUR('',#517768); +#531375 = OVER_RIDING_STYLED_ITEM('overriding color',(#531376),#62253, + #531282); +#531376 = PRESENTATION_STYLE_ASSIGNMENT((#531377)); +#531377 = SURFACE_STYLE_USAGE(.BOTH.,#531378); +#531378 = SURFACE_SIDE_STYLE('',(#531379)); +#531379 = SURFACE_STYLE_FILL_AREA(#531380); +#531380 = FILL_AREA_STYLE('',(#531381)); +#531381 = FILL_AREA_STYLE_COLOUR('',#517768); +#531382 = OVER_RIDING_STYLED_ITEM('overriding color',(#531383),#62279, + #531282); +#531383 = PRESENTATION_STYLE_ASSIGNMENT((#531384)); +#531384 = SURFACE_STYLE_USAGE(.BOTH.,#531385); +#531385 = SURFACE_SIDE_STYLE('',(#531386)); +#531386 = SURFACE_STYLE_FILL_AREA(#531387); +#531387 = FILL_AREA_STYLE('',(#531388)); +#531388 = FILL_AREA_STYLE_COLOUR('',#517768); +#531389 = OVER_RIDING_STYLED_ITEM('overriding color',(#531390),#62303, + #531282); +#531390 = PRESENTATION_STYLE_ASSIGNMENT((#531391)); +#531391 = SURFACE_STYLE_USAGE(.BOTH.,#531392); +#531392 = SURFACE_SIDE_STYLE('',(#531393)); +#531393 = SURFACE_STYLE_FILL_AREA(#531394); +#531394 = FILL_AREA_STYLE('',(#531395)); +#531395 = FILL_AREA_STYLE_COLOUR('',#517768); +#531396 = OVER_RIDING_STYLED_ITEM('overriding color',(#531397),#62330, + #531282); +#531397 = PRESENTATION_STYLE_ASSIGNMENT((#531398)); +#531398 = SURFACE_STYLE_USAGE(.BOTH.,#531399); +#531399 = SURFACE_SIDE_STYLE('',(#531400)); +#531400 = SURFACE_STYLE_FILL_AREA(#531401); +#531401 = FILL_AREA_STYLE('',(#531402)); +#531402 = FILL_AREA_STYLE_COLOUR('',#517768); +#531403 = OVER_RIDING_STYLED_ITEM('overriding color',(#531404),#62342, + #531282); +#531404 = PRESENTATION_STYLE_ASSIGNMENT((#531405)); +#531405 = SURFACE_STYLE_USAGE(.BOTH.,#531406); +#531406 = SURFACE_SIDE_STYLE('',(#531407)); +#531407 = SURFACE_STYLE_FILL_AREA(#531408); +#531408 = FILL_AREA_STYLE('',(#531409)); +#531409 = FILL_AREA_STYLE_COLOUR('',#517768); +#531410 = OVER_RIDING_STYLED_ITEM('overriding color',(#531411),#62359, + #531282); +#531411 = PRESENTATION_STYLE_ASSIGNMENT((#531412)); +#531412 = SURFACE_STYLE_USAGE(.BOTH.,#531413); +#531413 = SURFACE_SIDE_STYLE('',(#531414)); +#531414 = SURFACE_STYLE_FILL_AREA(#531415); +#531415 = FILL_AREA_STYLE('',(#531416)); +#531416 = FILL_AREA_STYLE_COLOUR('',#517768); +#531417 = STYLED_ITEM('color',(#531418),#62371); +#531418 = PRESENTATION_STYLE_ASSIGNMENT((#531419,#531424)); +#531419 = SURFACE_STYLE_USAGE(.BOTH.,#531420); +#531420 = SURFACE_SIDE_STYLE('',(#531421)); +#531421 = SURFACE_STYLE_FILL_AREA(#531422); +#531422 = FILL_AREA_STYLE('',(#531423)); +#531423 = FILL_AREA_STYLE_COLOUR('',#523837); +#531424 = CURVE_STYLE('',#531425,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531426 = OVER_RIDING_STYLED_ITEM('overriding color',(#531427),#62373, + #531417); +#531427 = PRESENTATION_STYLE_ASSIGNMENT((#531428)); +#531428 = SURFACE_STYLE_USAGE(.BOTH.,#531429); +#531429 = SURFACE_SIDE_STYLE('',(#531430)); +#531430 = SURFACE_STYLE_FILL_AREA(#531431); +#531431 = FILL_AREA_STYLE('',(#531432)); +#531432 = FILL_AREA_STYLE_COLOUR('',#517768); +#531433 = OVER_RIDING_STYLED_ITEM('overriding color',(#531434),#62413, + #531417); +#531434 = PRESENTATION_STYLE_ASSIGNMENT((#531435)); +#531435 = SURFACE_STYLE_USAGE(.BOTH.,#531436); +#531436 = SURFACE_SIDE_STYLE('',(#531437)); +#531437 = SURFACE_STYLE_FILL_AREA(#531438); +#531438 = FILL_AREA_STYLE('',(#531439)); +#531439 = FILL_AREA_STYLE_COLOUR('',#517768); +#531440 = OVER_RIDING_STYLED_ITEM('overriding color',(#531441),#62444, + #531417); +#531441 = PRESENTATION_STYLE_ASSIGNMENT((#531442)); +#531442 = SURFACE_STYLE_USAGE(.BOTH.,#531443); +#531443 = SURFACE_SIDE_STYLE('',(#531444)); +#531444 = SURFACE_STYLE_FILL_AREA(#531445); +#531445 = FILL_AREA_STYLE('',(#531446)); +#531446 = FILL_AREA_STYLE_COLOUR('',#517768); +#531447 = OVER_RIDING_STYLED_ITEM('overriding color',(#531448),#62475, + #531417); +#531448 = PRESENTATION_STYLE_ASSIGNMENT((#531449)); +#531449 = SURFACE_STYLE_USAGE(.BOTH.,#531450); +#531450 = SURFACE_SIDE_STYLE('',(#531451)); +#531451 = SURFACE_STYLE_FILL_AREA(#531452); +#531452 = FILL_AREA_STYLE('',(#531453)); +#531453 = FILL_AREA_STYLE_COLOUR('',#517768); +#531454 = OVER_RIDING_STYLED_ITEM('overriding color',(#531455),#62525, + #531417); +#531455 = PRESENTATION_STYLE_ASSIGNMENT((#531456)); +#531456 = SURFACE_STYLE_USAGE(.BOTH.,#531457); +#531457 = SURFACE_SIDE_STYLE('',(#531458)); +#531458 = SURFACE_STYLE_FILL_AREA(#531459); +#531459 = FILL_AREA_STYLE('',(#531460)); +#531460 = FILL_AREA_STYLE_COLOUR('',#517768); +#531461 = OVER_RIDING_STYLED_ITEM('overriding color',(#531462),#62556, + #531417); +#531462 = PRESENTATION_STYLE_ASSIGNMENT((#531463)); +#531463 = SURFACE_STYLE_USAGE(.BOTH.,#531464); +#531464 = SURFACE_SIDE_STYLE('',(#531465)); +#531465 = SURFACE_STYLE_FILL_AREA(#531466); +#531466 = FILL_AREA_STYLE('',(#531467)); +#531467 = FILL_AREA_STYLE_COLOUR('',#517768); +#531468 = OVER_RIDING_STYLED_ITEM('overriding color',(#531469),#62589, + #531417); +#531469 = PRESENTATION_STYLE_ASSIGNMENT((#531470)); +#531470 = SURFACE_STYLE_USAGE(.BOTH.,#531471); +#531471 = SURFACE_SIDE_STYLE('',(#531472)); +#531472 = SURFACE_STYLE_FILL_AREA(#531473); +#531473 = FILL_AREA_STYLE('',(#531474)); +#531474 = FILL_AREA_STYLE_COLOUR('',#517768); +#531475 = OVER_RIDING_STYLED_ITEM('overriding color',(#531476),#62606, + #531417); +#531476 = PRESENTATION_STYLE_ASSIGNMENT((#531477)); +#531477 = SURFACE_STYLE_USAGE(.BOTH.,#531478); +#531478 = SURFACE_SIDE_STYLE('',(#531479)); +#531479 = SURFACE_STYLE_FILL_AREA(#531480); +#531480 = FILL_AREA_STYLE('',(#531481)); +#531481 = FILL_AREA_STYLE_COLOUR('',#517768); +#531482 = OVER_RIDING_STYLED_ITEM('overriding color',(#531483),#62630, + #531417); +#531483 = PRESENTATION_STYLE_ASSIGNMENT((#531484)); +#531484 = SURFACE_STYLE_USAGE(.BOTH.,#531485); +#531485 = SURFACE_SIDE_STYLE('',(#531486)); +#531486 = SURFACE_STYLE_FILL_AREA(#531487); +#531487 = FILL_AREA_STYLE('',(#531488)); +#531488 = FILL_AREA_STYLE_COLOUR('',#517768); +#531489 = OVER_RIDING_STYLED_ITEM('overriding color',(#531490),#62661, + #531417); +#531490 = PRESENTATION_STYLE_ASSIGNMENT((#531491)); +#531491 = SURFACE_STYLE_USAGE(.BOTH.,#531492); +#531492 = SURFACE_SIDE_STYLE('',(#531493)); +#531493 = SURFACE_STYLE_FILL_AREA(#531494); +#531494 = FILL_AREA_STYLE('',(#531495)); +#531495 = FILL_AREA_STYLE_COLOUR('',#517768); +#531496 = OVER_RIDING_STYLED_ITEM('overriding color',(#531497),#62678, + #531417); +#531497 = PRESENTATION_STYLE_ASSIGNMENT((#531498)); +#531498 = SURFACE_STYLE_USAGE(.BOTH.,#531499); +#531499 = SURFACE_SIDE_STYLE('',(#531500)); +#531500 = SURFACE_STYLE_FILL_AREA(#531501); +#531501 = FILL_AREA_STYLE('',(#531502)); +#531502 = FILL_AREA_STYLE_COLOUR('',#517768); +#531503 = OVER_RIDING_STYLED_ITEM('overriding color',(#531504),#62707, + #531417); +#531504 = PRESENTATION_STYLE_ASSIGNMENT((#531505)); +#531505 = SURFACE_STYLE_USAGE(.BOTH.,#531506); +#531506 = SURFACE_SIDE_STYLE('',(#531507)); +#531507 = SURFACE_STYLE_FILL_AREA(#531508); +#531508 = FILL_AREA_STYLE('',(#531509)); +#531509 = FILL_AREA_STYLE_COLOUR('',#517768); +#531510 = OVER_RIDING_STYLED_ITEM('overriding color',(#531511),#62731, + #531417); +#531511 = PRESENTATION_STYLE_ASSIGNMENT((#531512)); +#531512 = SURFACE_STYLE_USAGE(.BOTH.,#531513); +#531513 = SURFACE_SIDE_STYLE('',(#531514)); +#531514 = SURFACE_STYLE_FILL_AREA(#531515); +#531515 = FILL_AREA_STYLE('',(#531516)); +#531516 = FILL_AREA_STYLE_COLOUR('',#517768); +#531517 = OVER_RIDING_STYLED_ITEM('overriding color',(#531518),#62757, + #531417); +#531518 = PRESENTATION_STYLE_ASSIGNMENT((#531519)); +#531519 = SURFACE_STYLE_USAGE(.BOTH.,#531520); +#531520 = SURFACE_SIDE_STYLE('',(#531521)); +#531521 = SURFACE_STYLE_FILL_AREA(#531522); +#531522 = FILL_AREA_STYLE('',(#531523)); +#531523 = FILL_AREA_STYLE_COLOUR('',#517768); +#531524 = OVER_RIDING_STYLED_ITEM('overriding color',(#531525),#62781, + #531417); +#531525 = PRESENTATION_STYLE_ASSIGNMENT((#531526)); +#531526 = SURFACE_STYLE_USAGE(.BOTH.,#531527); +#531527 = SURFACE_SIDE_STYLE('',(#531528)); +#531528 = SURFACE_STYLE_FILL_AREA(#531529); +#531529 = FILL_AREA_STYLE('',(#531530)); +#531530 = FILL_AREA_STYLE_COLOUR('',#517768); +#531531 = OVER_RIDING_STYLED_ITEM('overriding color',(#531532),#62808, + #531417); +#531532 = PRESENTATION_STYLE_ASSIGNMENT((#531533)); +#531533 = SURFACE_STYLE_USAGE(.BOTH.,#531534); +#531534 = SURFACE_SIDE_STYLE('',(#531535)); +#531535 = SURFACE_STYLE_FILL_AREA(#531536); +#531536 = FILL_AREA_STYLE('',(#531537)); +#531537 = FILL_AREA_STYLE_COLOUR('',#517768); +#531538 = OVER_RIDING_STYLED_ITEM('overriding color',(#531539),#62820, + #531417); +#531539 = PRESENTATION_STYLE_ASSIGNMENT((#531540)); +#531540 = SURFACE_STYLE_USAGE(.BOTH.,#531541); +#531541 = SURFACE_SIDE_STYLE('',(#531542)); +#531542 = SURFACE_STYLE_FILL_AREA(#531543); +#531543 = FILL_AREA_STYLE('',(#531544)); +#531544 = FILL_AREA_STYLE_COLOUR('',#517768); +#531545 = OVER_RIDING_STYLED_ITEM('overriding color',(#531546),#62837, + #531417); +#531546 = PRESENTATION_STYLE_ASSIGNMENT((#531547)); +#531547 = SURFACE_STYLE_USAGE(.BOTH.,#531548); +#531548 = SURFACE_SIDE_STYLE('',(#531549)); +#531549 = SURFACE_STYLE_FILL_AREA(#531550); +#531550 = FILL_AREA_STYLE('',(#531551)); +#531551 = FILL_AREA_STYLE_COLOUR('',#517768); +#531552 = STYLED_ITEM('color',(#531553),#62849); +#531553 = PRESENTATION_STYLE_ASSIGNMENT((#531554,#531559)); +#531554 = SURFACE_STYLE_USAGE(.BOTH.,#531555); +#531555 = SURFACE_SIDE_STYLE('',(#531556)); +#531556 = SURFACE_STYLE_FILL_AREA(#531557); +#531557 = FILL_AREA_STYLE('',(#531558)); +#531558 = FILL_AREA_STYLE_COLOUR('',#523837); +#531559 = CURVE_STYLE('',#531560,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531560 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531561 = OVER_RIDING_STYLED_ITEM('overriding color',(#531562),#62851, + #531552); +#531562 = PRESENTATION_STYLE_ASSIGNMENT((#531563)); +#531563 = SURFACE_STYLE_USAGE(.BOTH.,#531564); +#531564 = SURFACE_SIDE_STYLE('',(#531565)); +#531565 = SURFACE_STYLE_FILL_AREA(#531566); +#531566 = FILL_AREA_STYLE('',(#531567)); +#531567 = FILL_AREA_STYLE_COLOUR('',#517768); +#531568 = OVER_RIDING_STYLED_ITEM('overriding color',(#531569),#62891, + #531552); +#531569 = PRESENTATION_STYLE_ASSIGNMENT((#531570)); +#531570 = SURFACE_STYLE_USAGE(.BOTH.,#531571); +#531571 = SURFACE_SIDE_STYLE('',(#531572)); +#531572 = SURFACE_STYLE_FILL_AREA(#531573); +#531573 = FILL_AREA_STYLE('',(#531574)); +#531574 = FILL_AREA_STYLE_COLOUR('',#517768); +#531575 = OVER_RIDING_STYLED_ITEM('overriding color',(#531576),#62922, + #531552); +#531576 = PRESENTATION_STYLE_ASSIGNMENT((#531577)); +#531577 = SURFACE_STYLE_USAGE(.BOTH.,#531578); +#531578 = SURFACE_SIDE_STYLE('',(#531579)); +#531579 = SURFACE_STYLE_FILL_AREA(#531580); +#531580 = FILL_AREA_STYLE('',(#531581)); +#531581 = FILL_AREA_STYLE_COLOUR('',#517768); +#531582 = OVER_RIDING_STYLED_ITEM('overriding color',(#531583),#62953, + #531552); +#531583 = PRESENTATION_STYLE_ASSIGNMENT((#531584)); +#531584 = SURFACE_STYLE_USAGE(.BOTH.,#531585); +#531585 = SURFACE_SIDE_STYLE('',(#531586)); +#531586 = SURFACE_STYLE_FILL_AREA(#531587); +#531587 = FILL_AREA_STYLE('',(#531588)); +#531588 = FILL_AREA_STYLE_COLOUR('',#517768); +#531589 = OVER_RIDING_STYLED_ITEM('overriding color',(#531590),#63003, + #531552); +#531590 = PRESENTATION_STYLE_ASSIGNMENT((#531591)); +#531591 = SURFACE_STYLE_USAGE(.BOTH.,#531592); +#531592 = SURFACE_SIDE_STYLE('',(#531593)); +#531593 = SURFACE_STYLE_FILL_AREA(#531594); +#531594 = FILL_AREA_STYLE('',(#531595)); +#531595 = FILL_AREA_STYLE_COLOUR('',#517768); +#531596 = OVER_RIDING_STYLED_ITEM('overriding color',(#531597),#63034, + #531552); +#531597 = PRESENTATION_STYLE_ASSIGNMENT((#531598)); +#531598 = SURFACE_STYLE_USAGE(.BOTH.,#531599); +#531599 = SURFACE_SIDE_STYLE('',(#531600)); +#531600 = SURFACE_STYLE_FILL_AREA(#531601); +#531601 = FILL_AREA_STYLE('',(#531602)); +#531602 = FILL_AREA_STYLE_COLOUR('',#517768); +#531603 = OVER_RIDING_STYLED_ITEM('overriding color',(#531604),#63067, + #531552); +#531604 = PRESENTATION_STYLE_ASSIGNMENT((#531605)); +#531605 = SURFACE_STYLE_USAGE(.BOTH.,#531606); +#531606 = SURFACE_SIDE_STYLE('',(#531607)); +#531607 = SURFACE_STYLE_FILL_AREA(#531608); +#531608 = FILL_AREA_STYLE('',(#531609)); +#531609 = FILL_AREA_STYLE_COLOUR('',#517768); +#531610 = OVER_RIDING_STYLED_ITEM('overriding color',(#531611),#63084, + #531552); +#531611 = PRESENTATION_STYLE_ASSIGNMENT((#531612)); +#531612 = SURFACE_STYLE_USAGE(.BOTH.,#531613); +#531613 = SURFACE_SIDE_STYLE('',(#531614)); +#531614 = SURFACE_STYLE_FILL_AREA(#531615); +#531615 = FILL_AREA_STYLE('',(#531616)); +#531616 = FILL_AREA_STYLE_COLOUR('',#517768); +#531617 = OVER_RIDING_STYLED_ITEM('overriding color',(#531618),#63108, + #531552); +#531618 = PRESENTATION_STYLE_ASSIGNMENT((#531619)); +#531619 = SURFACE_STYLE_USAGE(.BOTH.,#531620); +#531620 = SURFACE_SIDE_STYLE('',(#531621)); +#531621 = SURFACE_STYLE_FILL_AREA(#531622); +#531622 = FILL_AREA_STYLE('',(#531623)); +#531623 = FILL_AREA_STYLE_COLOUR('',#517768); +#531624 = OVER_RIDING_STYLED_ITEM('overriding color',(#531625),#63139, + #531552); +#531625 = PRESENTATION_STYLE_ASSIGNMENT((#531626)); +#531626 = SURFACE_STYLE_USAGE(.BOTH.,#531627); +#531627 = SURFACE_SIDE_STYLE('',(#531628)); +#531628 = SURFACE_STYLE_FILL_AREA(#531629); +#531629 = FILL_AREA_STYLE('',(#531630)); +#531630 = FILL_AREA_STYLE_COLOUR('',#517768); +#531631 = OVER_RIDING_STYLED_ITEM('overriding color',(#531632),#63156, + #531552); +#531632 = PRESENTATION_STYLE_ASSIGNMENT((#531633)); +#531633 = SURFACE_STYLE_USAGE(.BOTH.,#531634); +#531634 = SURFACE_SIDE_STYLE('',(#531635)); +#531635 = SURFACE_STYLE_FILL_AREA(#531636); +#531636 = FILL_AREA_STYLE('',(#531637)); +#531637 = FILL_AREA_STYLE_COLOUR('',#517768); +#531638 = OVER_RIDING_STYLED_ITEM('overriding color',(#531639),#63185, + #531552); +#531639 = PRESENTATION_STYLE_ASSIGNMENT((#531640)); +#531640 = SURFACE_STYLE_USAGE(.BOTH.,#531641); +#531641 = SURFACE_SIDE_STYLE('',(#531642)); +#531642 = SURFACE_STYLE_FILL_AREA(#531643); +#531643 = FILL_AREA_STYLE('',(#531644)); +#531644 = FILL_AREA_STYLE_COLOUR('',#517768); +#531645 = OVER_RIDING_STYLED_ITEM('overriding color',(#531646),#63209, + #531552); +#531646 = PRESENTATION_STYLE_ASSIGNMENT((#531647)); +#531647 = SURFACE_STYLE_USAGE(.BOTH.,#531648); +#531648 = SURFACE_SIDE_STYLE('',(#531649)); +#531649 = SURFACE_STYLE_FILL_AREA(#531650); +#531650 = FILL_AREA_STYLE('',(#531651)); +#531651 = FILL_AREA_STYLE_COLOUR('',#517768); +#531652 = OVER_RIDING_STYLED_ITEM('overriding color',(#531653),#63235, + #531552); +#531653 = PRESENTATION_STYLE_ASSIGNMENT((#531654)); +#531654 = SURFACE_STYLE_USAGE(.BOTH.,#531655); +#531655 = SURFACE_SIDE_STYLE('',(#531656)); +#531656 = SURFACE_STYLE_FILL_AREA(#531657); +#531657 = FILL_AREA_STYLE('',(#531658)); +#531658 = FILL_AREA_STYLE_COLOUR('',#517768); +#531659 = OVER_RIDING_STYLED_ITEM('overriding color',(#531660),#63259, + #531552); +#531660 = PRESENTATION_STYLE_ASSIGNMENT((#531661)); +#531661 = SURFACE_STYLE_USAGE(.BOTH.,#531662); +#531662 = SURFACE_SIDE_STYLE('',(#531663)); +#531663 = SURFACE_STYLE_FILL_AREA(#531664); +#531664 = FILL_AREA_STYLE('',(#531665)); +#531665 = FILL_AREA_STYLE_COLOUR('',#517768); +#531666 = OVER_RIDING_STYLED_ITEM('overriding color',(#531667),#63286, + #531552); +#531667 = PRESENTATION_STYLE_ASSIGNMENT((#531668)); +#531668 = SURFACE_STYLE_USAGE(.BOTH.,#531669); +#531669 = SURFACE_SIDE_STYLE('',(#531670)); +#531670 = SURFACE_STYLE_FILL_AREA(#531671); +#531671 = FILL_AREA_STYLE('',(#531672)); +#531672 = FILL_AREA_STYLE_COLOUR('',#517768); +#531673 = OVER_RIDING_STYLED_ITEM('overriding color',(#531674),#63298, + #531552); +#531674 = PRESENTATION_STYLE_ASSIGNMENT((#531675)); +#531675 = SURFACE_STYLE_USAGE(.BOTH.,#531676); +#531676 = SURFACE_SIDE_STYLE('',(#531677)); +#531677 = SURFACE_STYLE_FILL_AREA(#531678); +#531678 = FILL_AREA_STYLE('',(#531679)); +#531679 = FILL_AREA_STYLE_COLOUR('',#517768); +#531680 = OVER_RIDING_STYLED_ITEM('overriding color',(#531681),#63315, + #531552); +#531681 = PRESENTATION_STYLE_ASSIGNMENT((#531682)); +#531682 = SURFACE_STYLE_USAGE(.BOTH.,#531683); +#531683 = SURFACE_SIDE_STYLE('',(#531684)); +#531684 = SURFACE_STYLE_FILL_AREA(#531685); +#531685 = FILL_AREA_STYLE('',(#531686)); +#531686 = FILL_AREA_STYLE_COLOUR('',#517768); +#531687 = STYLED_ITEM('color',(#531688),#63327); +#531688 = PRESENTATION_STYLE_ASSIGNMENT((#531689,#531694)); +#531689 = SURFACE_STYLE_USAGE(.BOTH.,#531690); +#531690 = SURFACE_SIDE_STYLE('',(#531691)); +#531691 = SURFACE_STYLE_FILL_AREA(#531692); +#531692 = FILL_AREA_STYLE('',(#531693)); +#531693 = FILL_AREA_STYLE_COLOUR('',#523837); +#531694 = CURVE_STYLE('',#531695,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531696 = OVER_RIDING_STYLED_ITEM('overriding color',(#531697),#63329, + #531687); +#531697 = PRESENTATION_STYLE_ASSIGNMENT((#531698)); +#531698 = SURFACE_STYLE_USAGE(.BOTH.,#531699); +#531699 = SURFACE_SIDE_STYLE('',(#531700)); +#531700 = SURFACE_STYLE_FILL_AREA(#531701); +#531701 = FILL_AREA_STYLE('',(#531702)); +#531702 = FILL_AREA_STYLE_COLOUR('',#517768); +#531703 = OVER_RIDING_STYLED_ITEM('overriding color',(#531704),#63369, + #531687); +#531704 = PRESENTATION_STYLE_ASSIGNMENT((#531705)); +#531705 = SURFACE_STYLE_USAGE(.BOTH.,#531706); +#531706 = SURFACE_SIDE_STYLE('',(#531707)); +#531707 = SURFACE_STYLE_FILL_AREA(#531708); +#531708 = FILL_AREA_STYLE('',(#531709)); +#531709 = FILL_AREA_STYLE_COLOUR('',#517768); +#531710 = OVER_RIDING_STYLED_ITEM('overriding color',(#531711),#63400, + #531687); +#531711 = PRESENTATION_STYLE_ASSIGNMENT((#531712)); +#531712 = SURFACE_STYLE_USAGE(.BOTH.,#531713); +#531713 = SURFACE_SIDE_STYLE('',(#531714)); +#531714 = SURFACE_STYLE_FILL_AREA(#531715); +#531715 = FILL_AREA_STYLE('',(#531716)); +#531716 = FILL_AREA_STYLE_COLOUR('',#517768); +#531717 = OVER_RIDING_STYLED_ITEM('overriding color',(#531718),#63431, + #531687); +#531718 = PRESENTATION_STYLE_ASSIGNMENT((#531719)); +#531719 = SURFACE_STYLE_USAGE(.BOTH.,#531720); +#531720 = SURFACE_SIDE_STYLE('',(#531721)); +#531721 = SURFACE_STYLE_FILL_AREA(#531722); +#531722 = FILL_AREA_STYLE('',(#531723)); +#531723 = FILL_AREA_STYLE_COLOUR('',#517768); +#531724 = OVER_RIDING_STYLED_ITEM('overriding color',(#531725),#63481, + #531687); +#531725 = PRESENTATION_STYLE_ASSIGNMENT((#531726)); +#531726 = SURFACE_STYLE_USAGE(.BOTH.,#531727); +#531727 = SURFACE_SIDE_STYLE('',(#531728)); +#531728 = SURFACE_STYLE_FILL_AREA(#531729); +#531729 = FILL_AREA_STYLE('',(#531730)); +#531730 = FILL_AREA_STYLE_COLOUR('',#517768); +#531731 = OVER_RIDING_STYLED_ITEM('overriding color',(#531732),#63512, + #531687); +#531732 = PRESENTATION_STYLE_ASSIGNMENT((#531733)); +#531733 = SURFACE_STYLE_USAGE(.BOTH.,#531734); +#531734 = SURFACE_SIDE_STYLE('',(#531735)); +#531735 = SURFACE_STYLE_FILL_AREA(#531736); +#531736 = FILL_AREA_STYLE('',(#531737)); +#531737 = FILL_AREA_STYLE_COLOUR('',#517768); +#531738 = OVER_RIDING_STYLED_ITEM('overriding color',(#531739),#63545, + #531687); +#531739 = PRESENTATION_STYLE_ASSIGNMENT((#531740)); +#531740 = SURFACE_STYLE_USAGE(.BOTH.,#531741); +#531741 = SURFACE_SIDE_STYLE('',(#531742)); +#531742 = SURFACE_STYLE_FILL_AREA(#531743); +#531743 = FILL_AREA_STYLE('',(#531744)); +#531744 = FILL_AREA_STYLE_COLOUR('',#517768); +#531745 = OVER_RIDING_STYLED_ITEM('overriding color',(#531746),#63562, + #531687); +#531746 = PRESENTATION_STYLE_ASSIGNMENT((#531747)); +#531747 = SURFACE_STYLE_USAGE(.BOTH.,#531748); +#531748 = SURFACE_SIDE_STYLE('',(#531749)); +#531749 = SURFACE_STYLE_FILL_AREA(#531750); +#531750 = FILL_AREA_STYLE('',(#531751)); +#531751 = FILL_AREA_STYLE_COLOUR('',#517768); +#531752 = OVER_RIDING_STYLED_ITEM('overriding color',(#531753),#63586, + #531687); +#531753 = PRESENTATION_STYLE_ASSIGNMENT((#531754)); +#531754 = SURFACE_STYLE_USAGE(.BOTH.,#531755); +#531755 = SURFACE_SIDE_STYLE('',(#531756)); +#531756 = SURFACE_STYLE_FILL_AREA(#531757); +#531757 = FILL_AREA_STYLE('',(#531758)); +#531758 = FILL_AREA_STYLE_COLOUR('',#517768); +#531759 = OVER_RIDING_STYLED_ITEM('overriding color',(#531760),#63617, + #531687); +#531760 = PRESENTATION_STYLE_ASSIGNMENT((#531761)); +#531761 = SURFACE_STYLE_USAGE(.BOTH.,#531762); +#531762 = SURFACE_SIDE_STYLE('',(#531763)); +#531763 = SURFACE_STYLE_FILL_AREA(#531764); +#531764 = FILL_AREA_STYLE('',(#531765)); +#531765 = FILL_AREA_STYLE_COLOUR('',#517768); +#531766 = OVER_RIDING_STYLED_ITEM('overriding color',(#531767),#63634, + #531687); +#531767 = PRESENTATION_STYLE_ASSIGNMENT((#531768)); +#531768 = SURFACE_STYLE_USAGE(.BOTH.,#531769); +#531769 = SURFACE_SIDE_STYLE('',(#531770)); +#531770 = SURFACE_STYLE_FILL_AREA(#531771); +#531771 = FILL_AREA_STYLE('',(#531772)); +#531772 = FILL_AREA_STYLE_COLOUR('',#517768); +#531773 = OVER_RIDING_STYLED_ITEM('overriding color',(#531774),#63663, + #531687); +#531774 = PRESENTATION_STYLE_ASSIGNMENT((#531775)); +#531775 = SURFACE_STYLE_USAGE(.BOTH.,#531776); +#531776 = SURFACE_SIDE_STYLE('',(#531777)); +#531777 = SURFACE_STYLE_FILL_AREA(#531778); +#531778 = FILL_AREA_STYLE('',(#531779)); +#531779 = FILL_AREA_STYLE_COLOUR('',#517768); +#531780 = OVER_RIDING_STYLED_ITEM('overriding color',(#531781),#63687, + #531687); +#531781 = PRESENTATION_STYLE_ASSIGNMENT((#531782)); +#531782 = SURFACE_STYLE_USAGE(.BOTH.,#531783); +#531783 = SURFACE_SIDE_STYLE('',(#531784)); +#531784 = SURFACE_STYLE_FILL_AREA(#531785); +#531785 = FILL_AREA_STYLE('',(#531786)); +#531786 = FILL_AREA_STYLE_COLOUR('',#517768); +#531787 = OVER_RIDING_STYLED_ITEM('overriding color',(#531788),#63713, + #531687); +#531788 = PRESENTATION_STYLE_ASSIGNMENT((#531789)); +#531789 = SURFACE_STYLE_USAGE(.BOTH.,#531790); +#531790 = SURFACE_SIDE_STYLE('',(#531791)); +#531791 = SURFACE_STYLE_FILL_AREA(#531792); +#531792 = FILL_AREA_STYLE('',(#531793)); +#531793 = FILL_AREA_STYLE_COLOUR('',#517768); +#531794 = OVER_RIDING_STYLED_ITEM('overriding color',(#531795),#63737, + #531687); +#531795 = PRESENTATION_STYLE_ASSIGNMENT((#531796)); +#531796 = SURFACE_STYLE_USAGE(.BOTH.,#531797); +#531797 = SURFACE_SIDE_STYLE('',(#531798)); +#531798 = SURFACE_STYLE_FILL_AREA(#531799); +#531799 = FILL_AREA_STYLE('',(#531800)); +#531800 = FILL_AREA_STYLE_COLOUR('',#517768); +#531801 = OVER_RIDING_STYLED_ITEM('overriding color',(#531802),#63764, + #531687); +#531802 = PRESENTATION_STYLE_ASSIGNMENT((#531803)); +#531803 = SURFACE_STYLE_USAGE(.BOTH.,#531804); +#531804 = SURFACE_SIDE_STYLE('',(#531805)); +#531805 = SURFACE_STYLE_FILL_AREA(#531806); +#531806 = FILL_AREA_STYLE('',(#531807)); +#531807 = FILL_AREA_STYLE_COLOUR('',#517768); +#531808 = OVER_RIDING_STYLED_ITEM('overriding color',(#531809),#63776, + #531687); +#531809 = PRESENTATION_STYLE_ASSIGNMENT((#531810)); +#531810 = SURFACE_STYLE_USAGE(.BOTH.,#531811); +#531811 = SURFACE_SIDE_STYLE('',(#531812)); +#531812 = SURFACE_STYLE_FILL_AREA(#531813); +#531813 = FILL_AREA_STYLE('',(#531814)); +#531814 = FILL_AREA_STYLE_COLOUR('',#517768); +#531815 = OVER_RIDING_STYLED_ITEM('overriding color',(#531816),#63793, + #531687); +#531816 = PRESENTATION_STYLE_ASSIGNMENT((#531817)); +#531817 = SURFACE_STYLE_USAGE(.BOTH.,#531818); +#531818 = SURFACE_SIDE_STYLE('',(#531819)); +#531819 = SURFACE_STYLE_FILL_AREA(#531820); +#531820 = FILL_AREA_STYLE('',(#531821)); +#531821 = FILL_AREA_STYLE_COLOUR('',#517768); +#531822 = STYLED_ITEM('color',(#531823),#63805); +#531823 = PRESENTATION_STYLE_ASSIGNMENT((#531824,#531829)); +#531824 = SURFACE_STYLE_USAGE(.BOTH.,#531825); +#531825 = SURFACE_SIDE_STYLE('',(#531826)); +#531826 = SURFACE_STYLE_FILL_AREA(#531827); +#531827 = FILL_AREA_STYLE('',(#531828)); +#531828 = FILL_AREA_STYLE_COLOUR('',#523837); +#531829 = CURVE_STYLE('',#531830,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531831 = OVER_RIDING_STYLED_ITEM('overriding color',(#531832),#63807, + #531822); +#531832 = PRESENTATION_STYLE_ASSIGNMENT((#531833)); +#531833 = SURFACE_STYLE_USAGE(.BOTH.,#531834); +#531834 = SURFACE_SIDE_STYLE('',(#531835)); +#531835 = SURFACE_STYLE_FILL_AREA(#531836); +#531836 = FILL_AREA_STYLE('',(#531837)); +#531837 = FILL_AREA_STYLE_COLOUR('',#517768); +#531838 = OVER_RIDING_STYLED_ITEM('overriding color',(#531839),#63847, + #531822); +#531839 = PRESENTATION_STYLE_ASSIGNMENT((#531840)); +#531840 = SURFACE_STYLE_USAGE(.BOTH.,#531841); +#531841 = SURFACE_SIDE_STYLE('',(#531842)); +#531842 = SURFACE_STYLE_FILL_AREA(#531843); +#531843 = FILL_AREA_STYLE('',(#531844)); +#531844 = FILL_AREA_STYLE_COLOUR('',#517768); +#531845 = OVER_RIDING_STYLED_ITEM('overriding color',(#531846),#63878, + #531822); +#531846 = PRESENTATION_STYLE_ASSIGNMENT((#531847)); +#531847 = SURFACE_STYLE_USAGE(.BOTH.,#531848); +#531848 = SURFACE_SIDE_STYLE('',(#531849)); +#531849 = SURFACE_STYLE_FILL_AREA(#531850); +#531850 = FILL_AREA_STYLE('',(#531851)); +#531851 = FILL_AREA_STYLE_COLOUR('',#517768); +#531852 = OVER_RIDING_STYLED_ITEM('overriding color',(#531853),#63909, + #531822); +#531853 = PRESENTATION_STYLE_ASSIGNMENT((#531854)); +#531854 = SURFACE_STYLE_USAGE(.BOTH.,#531855); +#531855 = SURFACE_SIDE_STYLE('',(#531856)); +#531856 = SURFACE_STYLE_FILL_AREA(#531857); +#531857 = FILL_AREA_STYLE('',(#531858)); +#531858 = FILL_AREA_STYLE_COLOUR('',#517768); +#531859 = OVER_RIDING_STYLED_ITEM('overriding color',(#531860),#63959, + #531822); +#531860 = PRESENTATION_STYLE_ASSIGNMENT((#531861)); +#531861 = SURFACE_STYLE_USAGE(.BOTH.,#531862); +#531862 = SURFACE_SIDE_STYLE('',(#531863)); +#531863 = SURFACE_STYLE_FILL_AREA(#531864); +#531864 = FILL_AREA_STYLE('',(#531865)); +#531865 = FILL_AREA_STYLE_COLOUR('',#517768); +#531866 = OVER_RIDING_STYLED_ITEM('overriding color',(#531867),#63990, + #531822); +#531867 = PRESENTATION_STYLE_ASSIGNMENT((#531868)); +#531868 = SURFACE_STYLE_USAGE(.BOTH.,#531869); +#531869 = SURFACE_SIDE_STYLE('',(#531870)); +#531870 = SURFACE_STYLE_FILL_AREA(#531871); +#531871 = FILL_AREA_STYLE('',(#531872)); +#531872 = FILL_AREA_STYLE_COLOUR('',#517768); +#531873 = OVER_RIDING_STYLED_ITEM('overriding color',(#531874),#64023, + #531822); +#531874 = PRESENTATION_STYLE_ASSIGNMENT((#531875)); +#531875 = SURFACE_STYLE_USAGE(.BOTH.,#531876); +#531876 = SURFACE_SIDE_STYLE('',(#531877)); +#531877 = SURFACE_STYLE_FILL_AREA(#531878); +#531878 = FILL_AREA_STYLE('',(#531879)); +#531879 = FILL_AREA_STYLE_COLOUR('',#517768); +#531880 = OVER_RIDING_STYLED_ITEM('overriding color',(#531881),#64040, + #531822); +#531881 = PRESENTATION_STYLE_ASSIGNMENT((#531882)); +#531882 = SURFACE_STYLE_USAGE(.BOTH.,#531883); +#531883 = SURFACE_SIDE_STYLE('',(#531884)); +#531884 = SURFACE_STYLE_FILL_AREA(#531885); +#531885 = FILL_AREA_STYLE('',(#531886)); +#531886 = FILL_AREA_STYLE_COLOUR('',#517768); +#531887 = OVER_RIDING_STYLED_ITEM('overriding color',(#531888),#64064, + #531822); +#531888 = PRESENTATION_STYLE_ASSIGNMENT((#531889)); +#531889 = SURFACE_STYLE_USAGE(.BOTH.,#531890); +#531890 = SURFACE_SIDE_STYLE('',(#531891)); +#531891 = SURFACE_STYLE_FILL_AREA(#531892); +#531892 = FILL_AREA_STYLE('',(#531893)); +#531893 = FILL_AREA_STYLE_COLOUR('',#517768); +#531894 = OVER_RIDING_STYLED_ITEM('overriding color',(#531895),#64095, + #531822); +#531895 = PRESENTATION_STYLE_ASSIGNMENT((#531896)); +#531896 = SURFACE_STYLE_USAGE(.BOTH.,#531897); +#531897 = SURFACE_SIDE_STYLE('',(#531898)); +#531898 = SURFACE_STYLE_FILL_AREA(#531899); +#531899 = FILL_AREA_STYLE('',(#531900)); +#531900 = FILL_AREA_STYLE_COLOUR('',#517768); +#531901 = OVER_RIDING_STYLED_ITEM('overriding color',(#531902),#64112, + #531822); +#531902 = PRESENTATION_STYLE_ASSIGNMENT((#531903)); +#531903 = SURFACE_STYLE_USAGE(.BOTH.,#531904); +#531904 = SURFACE_SIDE_STYLE('',(#531905)); +#531905 = SURFACE_STYLE_FILL_AREA(#531906); +#531906 = FILL_AREA_STYLE('',(#531907)); +#531907 = FILL_AREA_STYLE_COLOUR('',#517768); +#531908 = OVER_RIDING_STYLED_ITEM('overriding color',(#531909),#64141, + #531822); +#531909 = PRESENTATION_STYLE_ASSIGNMENT((#531910)); +#531910 = SURFACE_STYLE_USAGE(.BOTH.,#531911); +#531911 = SURFACE_SIDE_STYLE('',(#531912)); +#531912 = SURFACE_STYLE_FILL_AREA(#531913); +#531913 = FILL_AREA_STYLE('',(#531914)); +#531914 = FILL_AREA_STYLE_COLOUR('',#517768); +#531915 = OVER_RIDING_STYLED_ITEM('overriding color',(#531916),#64165, + #531822); +#531916 = PRESENTATION_STYLE_ASSIGNMENT((#531917)); +#531917 = SURFACE_STYLE_USAGE(.BOTH.,#531918); +#531918 = SURFACE_SIDE_STYLE('',(#531919)); +#531919 = SURFACE_STYLE_FILL_AREA(#531920); +#531920 = FILL_AREA_STYLE('',(#531921)); +#531921 = FILL_AREA_STYLE_COLOUR('',#517768); +#531922 = OVER_RIDING_STYLED_ITEM('overriding color',(#531923),#64191, + #531822); +#531923 = PRESENTATION_STYLE_ASSIGNMENT((#531924)); +#531924 = SURFACE_STYLE_USAGE(.BOTH.,#531925); +#531925 = SURFACE_SIDE_STYLE('',(#531926)); +#531926 = SURFACE_STYLE_FILL_AREA(#531927); +#531927 = FILL_AREA_STYLE('',(#531928)); +#531928 = FILL_AREA_STYLE_COLOUR('',#517768); +#531929 = OVER_RIDING_STYLED_ITEM('overriding color',(#531930),#64215, + #531822); +#531930 = PRESENTATION_STYLE_ASSIGNMENT((#531931)); +#531931 = SURFACE_STYLE_USAGE(.BOTH.,#531932); +#531932 = SURFACE_SIDE_STYLE('',(#531933)); +#531933 = SURFACE_STYLE_FILL_AREA(#531934); +#531934 = FILL_AREA_STYLE('',(#531935)); +#531935 = FILL_AREA_STYLE_COLOUR('',#517768); +#531936 = OVER_RIDING_STYLED_ITEM('overriding color',(#531937),#64242, + #531822); +#531937 = PRESENTATION_STYLE_ASSIGNMENT((#531938)); +#531938 = SURFACE_STYLE_USAGE(.BOTH.,#531939); +#531939 = SURFACE_SIDE_STYLE('',(#531940)); +#531940 = SURFACE_STYLE_FILL_AREA(#531941); +#531941 = FILL_AREA_STYLE('',(#531942)); +#531942 = FILL_AREA_STYLE_COLOUR('',#517768); +#531943 = OVER_RIDING_STYLED_ITEM('overriding color',(#531944),#64254, + #531822); +#531944 = PRESENTATION_STYLE_ASSIGNMENT((#531945)); +#531945 = SURFACE_STYLE_USAGE(.BOTH.,#531946); +#531946 = SURFACE_SIDE_STYLE('',(#531947)); +#531947 = SURFACE_STYLE_FILL_AREA(#531948); +#531948 = FILL_AREA_STYLE('',(#531949)); +#531949 = FILL_AREA_STYLE_COLOUR('',#517768); +#531950 = OVER_RIDING_STYLED_ITEM('overriding color',(#531951),#64271, + #531822); +#531951 = PRESENTATION_STYLE_ASSIGNMENT((#531952)); +#531952 = SURFACE_STYLE_USAGE(.BOTH.,#531953); +#531953 = SURFACE_SIDE_STYLE('',(#531954)); +#531954 = SURFACE_STYLE_FILL_AREA(#531955); +#531955 = FILL_AREA_STYLE('',(#531956)); +#531956 = FILL_AREA_STYLE_COLOUR('',#517768); +#531957 = STYLED_ITEM('color',(#531958),#64283); +#531958 = PRESENTATION_STYLE_ASSIGNMENT((#531959,#531964)); +#531959 = SURFACE_STYLE_USAGE(.BOTH.,#531960); +#531960 = SURFACE_SIDE_STYLE('',(#531961)); +#531961 = SURFACE_STYLE_FILL_AREA(#531962); +#531962 = FILL_AREA_STYLE('',(#531963)); +#531963 = FILL_AREA_STYLE_COLOUR('',#523837); +#531964 = CURVE_STYLE('',#531965,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#531965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#531966 = OVER_RIDING_STYLED_ITEM('overriding color',(#531967),#64285, + #531957); +#531967 = PRESENTATION_STYLE_ASSIGNMENT((#531968)); +#531968 = SURFACE_STYLE_USAGE(.BOTH.,#531969); +#531969 = SURFACE_SIDE_STYLE('',(#531970)); +#531970 = SURFACE_STYLE_FILL_AREA(#531971); +#531971 = FILL_AREA_STYLE('',(#531972)); +#531972 = FILL_AREA_STYLE_COLOUR('',#517768); +#531973 = OVER_RIDING_STYLED_ITEM('overriding color',(#531974),#64325, + #531957); +#531974 = PRESENTATION_STYLE_ASSIGNMENT((#531975)); +#531975 = SURFACE_STYLE_USAGE(.BOTH.,#531976); +#531976 = SURFACE_SIDE_STYLE('',(#531977)); +#531977 = SURFACE_STYLE_FILL_AREA(#531978); +#531978 = FILL_AREA_STYLE('',(#531979)); +#531979 = FILL_AREA_STYLE_COLOUR('',#517768); +#531980 = OVER_RIDING_STYLED_ITEM('overriding color',(#531981),#64356, + #531957); +#531981 = PRESENTATION_STYLE_ASSIGNMENT((#531982)); +#531982 = SURFACE_STYLE_USAGE(.BOTH.,#531983); +#531983 = SURFACE_SIDE_STYLE('',(#531984)); +#531984 = SURFACE_STYLE_FILL_AREA(#531985); +#531985 = FILL_AREA_STYLE('',(#531986)); +#531986 = FILL_AREA_STYLE_COLOUR('',#517768); +#531987 = OVER_RIDING_STYLED_ITEM('overriding color',(#531988),#64387, + #531957); +#531988 = PRESENTATION_STYLE_ASSIGNMENT((#531989)); +#531989 = SURFACE_STYLE_USAGE(.BOTH.,#531990); +#531990 = SURFACE_SIDE_STYLE('',(#531991)); +#531991 = SURFACE_STYLE_FILL_AREA(#531992); +#531992 = FILL_AREA_STYLE('',(#531993)); +#531993 = FILL_AREA_STYLE_COLOUR('',#517768); +#531994 = OVER_RIDING_STYLED_ITEM('overriding color',(#531995),#64437, + #531957); +#531995 = PRESENTATION_STYLE_ASSIGNMENT((#531996)); +#531996 = SURFACE_STYLE_USAGE(.BOTH.,#531997); +#531997 = SURFACE_SIDE_STYLE('',(#531998)); +#531998 = SURFACE_STYLE_FILL_AREA(#531999); +#531999 = FILL_AREA_STYLE('',(#532000)); +#532000 = FILL_AREA_STYLE_COLOUR('',#517768); +#532001 = OVER_RIDING_STYLED_ITEM('overriding color',(#532002),#64468, + #531957); +#532002 = PRESENTATION_STYLE_ASSIGNMENT((#532003)); +#532003 = SURFACE_STYLE_USAGE(.BOTH.,#532004); +#532004 = SURFACE_SIDE_STYLE('',(#532005)); +#532005 = SURFACE_STYLE_FILL_AREA(#532006); +#532006 = FILL_AREA_STYLE('',(#532007)); +#532007 = FILL_AREA_STYLE_COLOUR('',#517768); +#532008 = OVER_RIDING_STYLED_ITEM('overriding color',(#532009),#64501, + #531957); +#532009 = PRESENTATION_STYLE_ASSIGNMENT((#532010)); +#532010 = SURFACE_STYLE_USAGE(.BOTH.,#532011); +#532011 = SURFACE_SIDE_STYLE('',(#532012)); +#532012 = SURFACE_STYLE_FILL_AREA(#532013); +#532013 = FILL_AREA_STYLE('',(#532014)); +#532014 = FILL_AREA_STYLE_COLOUR('',#517768); +#532015 = OVER_RIDING_STYLED_ITEM('overriding color',(#532016),#64518, + #531957); +#532016 = PRESENTATION_STYLE_ASSIGNMENT((#532017)); +#532017 = SURFACE_STYLE_USAGE(.BOTH.,#532018); +#532018 = SURFACE_SIDE_STYLE('',(#532019)); +#532019 = SURFACE_STYLE_FILL_AREA(#532020); +#532020 = FILL_AREA_STYLE('',(#532021)); +#532021 = FILL_AREA_STYLE_COLOUR('',#517768); +#532022 = OVER_RIDING_STYLED_ITEM('overriding color',(#532023),#64542, + #531957); +#532023 = PRESENTATION_STYLE_ASSIGNMENT((#532024)); +#532024 = SURFACE_STYLE_USAGE(.BOTH.,#532025); +#532025 = SURFACE_SIDE_STYLE('',(#532026)); +#532026 = SURFACE_STYLE_FILL_AREA(#532027); +#532027 = FILL_AREA_STYLE('',(#532028)); +#532028 = FILL_AREA_STYLE_COLOUR('',#517768); +#532029 = OVER_RIDING_STYLED_ITEM('overriding color',(#532030),#64573, + #531957); +#532030 = PRESENTATION_STYLE_ASSIGNMENT((#532031)); +#532031 = SURFACE_STYLE_USAGE(.BOTH.,#532032); +#532032 = SURFACE_SIDE_STYLE('',(#532033)); +#532033 = SURFACE_STYLE_FILL_AREA(#532034); +#532034 = FILL_AREA_STYLE('',(#532035)); +#532035 = FILL_AREA_STYLE_COLOUR('',#517768); +#532036 = OVER_RIDING_STYLED_ITEM('overriding color',(#532037),#64590, + #531957); +#532037 = PRESENTATION_STYLE_ASSIGNMENT((#532038)); +#532038 = SURFACE_STYLE_USAGE(.BOTH.,#532039); +#532039 = SURFACE_SIDE_STYLE('',(#532040)); +#532040 = SURFACE_STYLE_FILL_AREA(#532041); +#532041 = FILL_AREA_STYLE('',(#532042)); +#532042 = FILL_AREA_STYLE_COLOUR('',#517768); +#532043 = OVER_RIDING_STYLED_ITEM('overriding color',(#532044),#64619, + #531957); +#532044 = PRESENTATION_STYLE_ASSIGNMENT((#532045)); +#532045 = SURFACE_STYLE_USAGE(.BOTH.,#532046); +#532046 = SURFACE_SIDE_STYLE('',(#532047)); +#532047 = SURFACE_STYLE_FILL_AREA(#532048); +#532048 = FILL_AREA_STYLE('',(#532049)); +#532049 = FILL_AREA_STYLE_COLOUR('',#517768); +#532050 = OVER_RIDING_STYLED_ITEM('overriding color',(#532051),#64643, + #531957); +#532051 = PRESENTATION_STYLE_ASSIGNMENT((#532052)); +#532052 = SURFACE_STYLE_USAGE(.BOTH.,#532053); +#532053 = SURFACE_SIDE_STYLE('',(#532054)); +#532054 = SURFACE_STYLE_FILL_AREA(#532055); +#532055 = FILL_AREA_STYLE('',(#532056)); +#532056 = FILL_AREA_STYLE_COLOUR('',#517768); +#532057 = OVER_RIDING_STYLED_ITEM('overriding color',(#532058),#64669, + #531957); +#532058 = PRESENTATION_STYLE_ASSIGNMENT((#532059)); +#532059 = SURFACE_STYLE_USAGE(.BOTH.,#532060); +#532060 = SURFACE_SIDE_STYLE('',(#532061)); +#532061 = SURFACE_STYLE_FILL_AREA(#532062); +#532062 = FILL_AREA_STYLE('',(#532063)); +#532063 = FILL_AREA_STYLE_COLOUR('',#517768); +#532064 = OVER_RIDING_STYLED_ITEM('overriding color',(#532065),#64693, + #531957); +#532065 = PRESENTATION_STYLE_ASSIGNMENT((#532066)); +#532066 = SURFACE_STYLE_USAGE(.BOTH.,#532067); +#532067 = SURFACE_SIDE_STYLE('',(#532068)); +#532068 = SURFACE_STYLE_FILL_AREA(#532069); +#532069 = FILL_AREA_STYLE('',(#532070)); +#532070 = FILL_AREA_STYLE_COLOUR('',#517768); +#532071 = OVER_RIDING_STYLED_ITEM('overriding color',(#532072),#64720, + #531957); +#532072 = PRESENTATION_STYLE_ASSIGNMENT((#532073)); +#532073 = SURFACE_STYLE_USAGE(.BOTH.,#532074); +#532074 = SURFACE_SIDE_STYLE('',(#532075)); +#532075 = SURFACE_STYLE_FILL_AREA(#532076); +#532076 = FILL_AREA_STYLE('',(#532077)); +#532077 = FILL_AREA_STYLE_COLOUR('',#517768); +#532078 = OVER_RIDING_STYLED_ITEM('overriding color',(#532079),#64732, + #531957); +#532079 = PRESENTATION_STYLE_ASSIGNMENT((#532080)); +#532080 = SURFACE_STYLE_USAGE(.BOTH.,#532081); +#532081 = SURFACE_SIDE_STYLE('',(#532082)); +#532082 = SURFACE_STYLE_FILL_AREA(#532083); +#532083 = FILL_AREA_STYLE('',(#532084)); +#532084 = FILL_AREA_STYLE_COLOUR('',#517768); +#532085 = OVER_RIDING_STYLED_ITEM('overriding color',(#532086),#64749, + #531957); +#532086 = PRESENTATION_STYLE_ASSIGNMENT((#532087)); +#532087 = SURFACE_STYLE_USAGE(.BOTH.,#532088); +#532088 = SURFACE_SIDE_STYLE('',(#532089)); +#532089 = SURFACE_STYLE_FILL_AREA(#532090); +#532090 = FILL_AREA_STYLE('',(#532091)); +#532091 = FILL_AREA_STYLE_COLOUR('',#517768); +#532092 = STYLED_ITEM('color',(#532093),#64761); +#532093 = PRESENTATION_STYLE_ASSIGNMENT((#532094,#532099)); +#532094 = SURFACE_STYLE_USAGE(.BOTH.,#532095); +#532095 = SURFACE_SIDE_STYLE('',(#532096)); +#532096 = SURFACE_STYLE_FILL_AREA(#532097); +#532097 = FILL_AREA_STYLE('',(#532098)); +#532098 = FILL_AREA_STYLE_COLOUR('',#523837); +#532099 = CURVE_STYLE('',#532100,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532101 = OVER_RIDING_STYLED_ITEM('overriding color',(#532102),#64763, + #532092); +#532102 = PRESENTATION_STYLE_ASSIGNMENT((#532103)); +#532103 = SURFACE_STYLE_USAGE(.BOTH.,#532104); +#532104 = SURFACE_SIDE_STYLE('',(#532105)); +#532105 = SURFACE_STYLE_FILL_AREA(#532106); +#532106 = FILL_AREA_STYLE('',(#532107)); +#532107 = FILL_AREA_STYLE_COLOUR('',#517768); +#532108 = OVER_RIDING_STYLED_ITEM('overriding color',(#532109),#64803, + #532092); +#532109 = PRESENTATION_STYLE_ASSIGNMENT((#532110)); +#532110 = SURFACE_STYLE_USAGE(.BOTH.,#532111); +#532111 = SURFACE_SIDE_STYLE('',(#532112)); +#532112 = SURFACE_STYLE_FILL_AREA(#532113); +#532113 = FILL_AREA_STYLE('',(#532114)); +#532114 = FILL_AREA_STYLE_COLOUR('',#517768); +#532115 = OVER_RIDING_STYLED_ITEM('overriding color',(#532116),#64834, + #532092); +#532116 = PRESENTATION_STYLE_ASSIGNMENT((#532117)); +#532117 = SURFACE_STYLE_USAGE(.BOTH.,#532118); +#532118 = SURFACE_SIDE_STYLE('',(#532119)); +#532119 = SURFACE_STYLE_FILL_AREA(#532120); +#532120 = FILL_AREA_STYLE('',(#532121)); +#532121 = FILL_AREA_STYLE_COLOUR('',#517768); +#532122 = OVER_RIDING_STYLED_ITEM('overriding color',(#532123),#64865, + #532092); +#532123 = PRESENTATION_STYLE_ASSIGNMENT((#532124)); +#532124 = SURFACE_STYLE_USAGE(.BOTH.,#532125); +#532125 = SURFACE_SIDE_STYLE('',(#532126)); +#532126 = SURFACE_STYLE_FILL_AREA(#532127); +#532127 = FILL_AREA_STYLE('',(#532128)); +#532128 = FILL_AREA_STYLE_COLOUR('',#517768); +#532129 = OVER_RIDING_STYLED_ITEM('overriding color',(#532130),#64915, + #532092); +#532130 = PRESENTATION_STYLE_ASSIGNMENT((#532131)); +#532131 = SURFACE_STYLE_USAGE(.BOTH.,#532132); +#532132 = SURFACE_SIDE_STYLE('',(#532133)); +#532133 = SURFACE_STYLE_FILL_AREA(#532134); +#532134 = FILL_AREA_STYLE('',(#532135)); +#532135 = FILL_AREA_STYLE_COLOUR('',#517768); +#532136 = OVER_RIDING_STYLED_ITEM('overriding color',(#532137),#64946, + #532092); +#532137 = PRESENTATION_STYLE_ASSIGNMENT((#532138)); +#532138 = SURFACE_STYLE_USAGE(.BOTH.,#532139); +#532139 = SURFACE_SIDE_STYLE('',(#532140)); +#532140 = SURFACE_STYLE_FILL_AREA(#532141); +#532141 = FILL_AREA_STYLE('',(#532142)); +#532142 = FILL_AREA_STYLE_COLOUR('',#517768); +#532143 = OVER_RIDING_STYLED_ITEM('overriding color',(#532144),#64979, + #532092); +#532144 = PRESENTATION_STYLE_ASSIGNMENT((#532145)); +#532145 = SURFACE_STYLE_USAGE(.BOTH.,#532146); +#532146 = SURFACE_SIDE_STYLE('',(#532147)); +#532147 = SURFACE_STYLE_FILL_AREA(#532148); +#532148 = FILL_AREA_STYLE('',(#532149)); +#532149 = FILL_AREA_STYLE_COLOUR('',#517768); +#532150 = OVER_RIDING_STYLED_ITEM('overriding color',(#532151),#64996, + #532092); +#532151 = PRESENTATION_STYLE_ASSIGNMENT((#532152)); +#532152 = SURFACE_STYLE_USAGE(.BOTH.,#532153); +#532153 = SURFACE_SIDE_STYLE('',(#532154)); +#532154 = SURFACE_STYLE_FILL_AREA(#532155); +#532155 = FILL_AREA_STYLE('',(#532156)); +#532156 = FILL_AREA_STYLE_COLOUR('',#517768); +#532157 = OVER_RIDING_STYLED_ITEM('overriding color',(#532158),#65020, + #532092); +#532158 = PRESENTATION_STYLE_ASSIGNMENT((#532159)); +#532159 = SURFACE_STYLE_USAGE(.BOTH.,#532160); +#532160 = SURFACE_SIDE_STYLE('',(#532161)); +#532161 = SURFACE_STYLE_FILL_AREA(#532162); +#532162 = FILL_AREA_STYLE('',(#532163)); +#532163 = FILL_AREA_STYLE_COLOUR('',#517768); +#532164 = OVER_RIDING_STYLED_ITEM('overriding color',(#532165),#65051, + #532092); +#532165 = PRESENTATION_STYLE_ASSIGNMENT((#532166)); +#532166 = SURFACE_STYLE_USAGE(.BOTH.,#532167); +#532167 = SURFACE_SIDE_STYLE('',(#532168)); +#532168 = SURFACE_STYLE_FILL_AREA(#532169); +#532169 = FILL_AREA_STYLE('',(#532170)); +#532170 = FILL_AREA_STYLE_COLOUR('',#517768); +#532171 = OVER_RIDING_STYLED_ITEM('overriding color',(#532172),#65068, + #532092); +#532172 = PRESENTATION_STYLE_ASSIGNMENT((#532173)); +#532173 = SURFACE_STYLE_USAGE(.BOTH.,#532174); +#532174 = SURFACE_SIDE_STYLE('',(#532175)); +#532175 = SURFACE_STYLE_FILL_AREA(#532176); +#532176 = FILL_AREA_STYLE('',(#532177)); +#532177 = FILL_AREA_STYLE_COLOUR('',#517768); +#532178 = OVER_RIDING_STYLED_ITEM('overriding color',(#532179),#65097, + #532092); +#532179 = PRESENTATION_STYLE_ASSIGNMENT((#532180)); +#532180 = SURFACE_STYLE_USAGE(.BOTH.,#532181); +#532181 = SURFACE_SIDE_STYLE('',(#532182)); +#532182 = SURFACE_STYLE_FILL_AREA(#532183); +#532183 = FILL_AREA_STYLE('',(#532184)); +#532184 = FILL_AREA_STYLE_COLOUR('',#517768); +#532185 = OVER_RIDING_STYLED_ITEM('overriding color',(#532186),#65121, + #532092); +#532186 = PRESENTATION_STYLE_ASSIGNMENT((#532187)); +#532187 = SURFACE_STYLE_USAGE(.BOTH.,#532188); +#532188 = SURFACE_SIDE_STYLE('',(#532189)); +#532189 = SURFACE_STYLE_FILL_AREA(#532190); +#532190 = FILL_AREA_STYLE('',(#532191)); +#532191 = FILL_AREA_STYLE_COLOUR('',#517768); +#532192 = OVER_RIDING_STYLED_ITEM('overriding color',(#532193),#65147, + #532092); +#532193 = PRESENTATION_STYLE_ASSIGNMENT((#532194)); +#532194 = SURFACE_STYLE_USAGE(.BOTH.,#532195); +#532195 = SURFACE_SIDE_STYLE('',(#532196)); +#532196 = SURFACE_STYLE_FILL_AREA(#532197); +#532197 = FILL_AREA_STYLE('',(#532198)); +#532198 = FILL_AREA_STYLE_COLOUR('',#517768); +#532199 = OVER_RIDING_STYLED_ITEM('overriding color',(#532200),#65171, + #532092); +#532200 = PRESENTATION_STYLE_ASSIGNMENT((#532201)); +#532201 = SURFACE_STYLE_USAGE(.BOTH.,#532202); +#532202 = SURFACE_SIDE_STYLE('',(#532203)); +#532203 = SURFACE_STYLE_FILL_AREA(#532204); +#532204 = FILL_AREA_STYLE('',(#532205)); +#532205 = FILL_AREA_STYLE_COLOUR('',#517768); +#532206 = OVER_RIDING_STYLED_ITEM('overriding color',(#532207),#65198, + #532092); +#532207 = PRESENTATION_STYLE_ASSIGNMENT((#532208)); +#532208 = SURFACE_STYLE_USAGE(.BOTH.,#532209); +#532209 = SURFACE_SIDE_STYLE('',(#532210)); +#532210 = SURFACE_STYLE_FILL_AREA(#532211); +#532211 = FILL_AREA_STYLE('',(#532212)); +#532212 = FILL_AREA_STYLE_COLOUR('',#517768); +#532213 = OVER_RIDING_STYLED_ITEM('overriding color',(#532214),#65210, + #532092); +#532214 = PRESENTATION_STYLE_ASSIGNMENT((#532215)); +#532215 = SURFACE_STYLE_USAGE(.BOTH.,#532216); +#532216 = SURFACE_SIDE_STYLE('',(#532217)); +#532217 = SURFACE_STYLE_FILL_AREA(#532218); +#532218 = FILL_AREA_STYLE('',(#532219)); +#532219 = FILL_AREA_STYLE_COLOUR('',#517768); +#532220 = OVER_RIDING_STYLED_ITEM('overriding color',(#532221),#65227, + #532092); +#532221 = PRESENTATION_STYLE_ASSIGNMENT((#532222)); +#532222 = SURFACE_STYLE_USAGE(.BOTH.,#532223); +#532223 = SURFACE_SIDE_STYLE('',(#532224)); +#532224 = SURFACE_STYLE_FILL_AREA(#532225); +#532225 = FILL_AREA_STYLE('',(#532226)); +#532226 = FILL_AREA_STYLE_COLOUR('',#517768); +#532227 = STYLED_ITEM('color',(#532228),#65239); +#532228 = PRESENTATION_STYLE_ASSIGNMENT((#532229,#532234)); +#532229 = SURFACE_STYLE_USAGE(.BOTH.,#532230); +#532230 = SURFACE_SIDE_STYLE('',(#532231)); +#532231 = SURFACE_STYLE_FILL_AREA(#532232); +#532232 = FILL_AREA_STYLE('',(#532233)); +#532233 = FILL_AREA_STYLE_COLOUR('',#523837); +#532234 = CURVE_STYLE('',#532235,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532236 = OVER_RIDING_STYLED_ITEM('overriding color',(#532237),#65241, + #532227); +#532237 = PRESENTATION_STYLE_ASSIGNMENT((#532238)); +#532238 = SURFACE_STYLE_USAGE(.BOTH.,#532239); +#532239 = SURFACE_SIDE_STYLE('',(#532240)); +#532240 = SURFACE_STYLE_FILL_AREA(#532241); +#532241 = FILL_AREA_STYLE('',(#532242)); +#532242 = FILL_AREA_STYLE_COLOUR('',#517768); +#532243 = OVER_RIDING_STYLED_ITEM('overriding color',(#532244),#65281, + #532227); +#532244 = PRESENTATION_STYLE_ASSIGNMENT((#532245)); +#532245 = SURFACE_STYLE_USAGE(.BOTH.,#532246); +#532246 = SURFACE_SIDE_STYLE('',(#532247)); +#532247 = SURFACE_STYLE_FILL_AREA(#532248); +#532248 = FILL_AREA_STYLE('',(#532249)); +#532249 = FILL_AREA_STYLE_COLOUR('',#517768); +#532250 = OVER_RIDING_STYLED_ITEM('overriding color',(#532251),#65312, + #532227); +#532251 = PRESENTATION_STYLE_ASSIGNMENT((#532252)); +#532252 = SURFACE_STYLE_USAGE(.BOTH.,#532253); +#532253 = SURFACE_SIDE_STYLE('',(#532254)); +#532254 = SURFACE_STYLE_FILL_AREA(#532255); +#532255 = FILL_AREA_STYLE('',(#532256)); +#532256 = FILL_AREA_STYLE_COLOUR('',#517768); +#532257 = OVER_RIDING_STYLED_ITEM('overriding color',(#532258),#65343, + #532227); +#532258 = PRESENTATION_STYLE_ASSIGNMENT((#532259)); +#532259 = SURFACE_STYLE_USAGE(.BOTH.,#532260); +#532260 = SURFACE_SIDE_STYLE('',(#532261)); +#532261 = SURFACE_STYLE_FILL_AREA(#532262); +#532262 = FILL_AREA_STYLE('',(#532263)); +#532263 = FILL_AREA_STYLE_COLOUR('',#517768); +#532264 = OVER_RIDING_STYLED_ITEM('overriding color',(#532265),#65393, + #532227); +#532265 = PRESENTATION_STYLE_ASSIGNMENT((#532266)); +#532266 = SURFACE_STYLE_USAGE(.BOTH.,#532267); +#532267 = SURFACE_SIDE_STYLE('',(#532268)); +#532268 = SURFACE_STYLE_FILL_AREA(#532269); +#532269 = FILL_AREA_STYLE('',(#532270)); +#532270 = FILL_AREA_STYLE_COLOUR('',#517768); +#532271 = OVER_RIDING_STYLED_ITEM('overriding color',(#532272),#65424, + #532227); +#532272 = PRESENTATION_STYLE_ASSIGNMENT((#532273)); +#532273 = SURFACE_STYLE_USAGE(.BOTH.,#532274); +#532274 = SURFACE_SIDE_STYLE('',(#532275)); +#532275 = SURFACE_STYLE_FILL_AREA(#532276); +#532276 = FILL_AREA_STYLE('',(#532277)); +#532277 = FILL_AREA_STYLE_COLOUR('',#517768); +#532278 = OVER_RIDING_STYLED_ITEM('overriding color',(#532279),#65457, + #532227); +#532279 = PRESENTATION_STYLE_ASSIGNMENT((#532280)); +#532280 = SURFACE_STYLE_USAGE(.BOTH.,#532281); +#532281 = SURFACE_SIDE_STYLE('',(#532282)); +#532282 = SURFACE_STYLE_FILL_AREA(#532283); +#532283 = FILL_AREA_STYLE('',(#532284)); +#532284 = FILL_AREA_STYLE_COLOUR('',#517768); +#532285 = OVER_RIDING_STYLED_ITEM('overriding color',(#532286),#65474, + #532227); +#532286 = PRESENTATION_STYLE_ASSIGNMENT((#532287)); +#532287 = SURFACE_STYLE_USAGE(.BOTH.,#532288); +#532288 = SURFACE_SIDE_STYLE('',(#532289)); +#532289 = SURFACE_STYLE_FILL_AREA(#532290); +#532290 = FILL_AREA_STYLE('',(#532291)); +#532291 = FILL_AREA_STYLE_COLOUR('',#517768); +#532292 = OVER_RIDING_STYLED_ITEM('overriding color',(#532293),#65498, + #532227); +#532293 = PRESENTATION_STYLE_ASSIGNMENT((#532294)); +#532294 = SURFACE_STYLE_USAGE(.BOTH.,#532295); +#532295 = SURFACE_SIDE_STYLE('',(#532296)); +#532296 = SURFACE_STYLE_FILL_AREA(#532297); +#532297 = FILL_AREA_STYLE('',(#532298)); +#532298 = FILL_AREA_STYLE_COLOUR('',#517768); +#532299 = OVER_RIDING_STYLED_ITEM('overriding color',(#532300),#65529, + #532227); +#532300 = PRESENTATION_STYLE_ASSIGNMENT((#532301)); +#532301 = SURFACE_STYLE_USAGE(.BOTH.,#532302); +#532302 = SURFACE_SIDE_STYLE('',(#532303)); +#532303 = SURFACE_STYLE_FILL_AREA(#532304); +#532304 = FILL_AREA_STYLE('',(#532305)); +#532305 = FILL_AREA_STYLE_COLOUR('',#517768); +#532306 = OVER_RIDING_STYLED_ITEM('overriding color',(#532307),#65546, + #532227); +#532307 = PRESENTATION_STYLE_ASSIGNMENT((#532308)); +#532308 = SURFACE_STYLE_USAGE(.BOTH.,#532309); +#532309 = SURFACE_SIDE_STYLE('',(#532310)); +#532310 = SURFACE_STYLE_FILL_AREA(#532311); +#532311 = FILL_AREA_STYLE('',(#532312)); +#532312 = FILL_AREA_STYLE_COLOUR('',#517768); +#532313 = OVER_RIDING_STYLED_ITEM('overriding color',(#532314),#65575, + #532227); +#532314 = PRESENTATION_STYLE_ASSIGNMENT((#532315)); +#532315 = SURFACE_STYLE_USAGE(.BOTH.,#532316); +#532316 = SURFACE_SIDE_STYLE('',(#532317)); +#532317 = SURFACE_STYLE_FILL_AREA(#532318); +#532318 = FILL_AREA_STYLE('',(#532319)); +#532319 = FILL_AREA_STYLE_COLOUR('',#517768); +#532320 = OVER_RIDING_STYLED_ITEM('overriding color',(#532321),#65599, + #532227); +#532321 = PRESENTATION_STYLE_ASSIGNMENT((#532322)); +#532322 = SURFACE_STYLE_USAGE(.BOTH.,#532323); +#532323 = SURFACE_SIDE_STYLE('',(#532324)); +#532324 = SURFACE_STYLE_FILL_AREA(#532325); +#532325 = FILL_AREA_STYLE('',(#532326)); +#532326 = FILL_AREA_STYLE_COLOUR('',#517768); +#532327 = OVER_RIDING_STYLED_ITEM('overriding color',(#532328),#65625, + #532227); +#532328 = PRESENTATION_STYLE_ASSIGNMENT((#532329)); +#532329 = SURFACE_STYLE_USAGE(.BOTH.,#532330); +#532330 = SURFACE_SIDE_STYLE('',(#532331)); +#532331 = SURFACE_STYLE_FILL_AREA(#532332); +#532332 = FILL_AREA_STYLE('',(#532333)); +#532333 = FILL_AREA_STYLE_COLOUR('',#517768); +#532334 = OVER_RIDING_STYLED_ITEM('overriding color',(#532335),#65649, + #532227); +#532335 = PRESENTATION_STYLE_ASSIGNMENT((#532336)); +#532336 = SURFACE_STYLE_USAGE(.BOTH.,#532337); +#532337 = SURFACE_SIDE_STYLE('',(#532338)); +#532338 = SURFACE_STYLE_FILL_AREA(#532339); +#532339 = FILL_AREA_STYLE('',(#532340)); +#532340 = FILL_AREA_STYLE_COLOUR('',#517768); +#532341 = OVER_RIDING_STYLED_ITEM('overriding color',(#532342),#65676, + #532227); +#532342 = PRESENTATION_STYLE_ASSIGNMENT((#532343)); +#532343 = SURFACE_STYLE_USAGE(.BOTH.,#532344); +#532344 = SURFACE_SIDE_STYLE('',(#532345)); +#532345 = SURFACE_STYLE_FILL_AREA(#532346); +#532346 = FILL_AREA_STYLE('',(#532347)); +#532347 = FILL_AREA_STYLE_COLOUR('',#517768); +#532348 = OVER_RIDING_STYLED_ITEM('overriding color',(#532349),#65688, + #532227); +#532349 = PRESENTATION_STYLE_ASSIGNMENT((#532350)); +#532350 = SURFACE_STYLE_USAGE(.BOTH.,#532351); +#532351 = SURFACE_SIDE_STYLE('',(#532352)); +#532352 = SURFACE_STYLE_FILL_AREA(#532353); +#532353 = FILL_AREA_STYLE('',(#532354)); +#532354 = FILL_AREA_STYLE_COLOUR('',#517768); +#532355 = OVER_RIDING_STYLED_ITEM('overriding color',(#532356),#65705, + #532227); +#532356 = PRESENTATION_STYLE_ASSIGNMENT((#532357)); +#532357 = SURFACE_STYLE_USAGE(.BOTH.,#532358); +#532358 = SURFACE_SIDE_STYLE('',(#532359)); +#532359 = SURFACE_STYLE_FILL_AREA(#532360); +#532360 = FILL_AREA_STYLE('',(#532361)); +#532361 = FILL_AREA_STYLE_COLOUR('',#517768); +#532362 = STYLED_ITEM('color',(#532363),#65717); +#532363 = PRESENTATION_STYLE_ASSIGNMENT((#532364,#532369)); +#532364 = SURFACE_STYLE_USAGE(.BOTH.,#532365); +#532365 = SURFACE_SIDE_STYLE('',(#532366)); +#532366 = SURFACE_STYLE_FILL_AREA(#532367); +#532367 = FILL_AREA_STYLE('',(#532368)); +#532368 = FILL_AREA_STYLE_COLOUR('',#523837); +#532369 = CURVE_STYLE('',#532370,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532371 = OVER_RIDING_STYLED_ITEM('overriding color',(#532372),#65719, + #532362); +#532372 = PRESENTATION_STYLE_ASSIGNMENT((#532373)); +#532373 = SURFACE_STYLE_USAGE(.BOTH.,#532374); +#532374 = SURFACE_SIDE_STYLE('',(#532375)); +#532375 = SURFACE_STYLE_FILL_AREA(#532376); +#532376 = FILL_AREA_STYLE('',(#532377)); +#532377 = FILL_AREA_STYLE_COLOUR('',#517768); +#532378 = OVER_RIDING_STYLED_ITEM('overriding color',(#532379),#65759, + #532362); +#532379 = PRESENTATION_STYLE_ASSIGNMENT((#532380)); +#532380 = SURFACE_STYLE_USAGE(.BOTH.,#532381); +#532381 = SURFACE_SIDE_STYLE('',(#532382)); +#532382 = SURFACE_STYLE_FILL_AREA(#532383); +#532383 = FILL_AREA_STYLE('',(#532384)); +#532384 = FILL_AREA_STYLE_COLOUR('',#517768); +#532385 = OVER_RIDING_STYLED_ITEM('overriding color',(#532386),#65790, + #532362); +#532386 = PRESENTATION_STYLE_ASSIGNMENT((#532387)); +#532387 = SURFACE_STYLE_USAGE(.BOTH.,#532388); +#532388 = SURFACE_SIDE_STYLE('',(#532389)); +#532389 = SURFACE_STYLE_FILL_AREA(#532390); +#532390 = FILL_AREA_STYLE('',(#532391)); +#532391 = FILL_AREA_STYLE_COLOUR('',#517768); +#532392 = OVER_RIDING_STYLED_ITEM('overriding color',(#532393),#65821, + #532362); +#532393 = PRESENTATION_STYLE_ASSIGNMENT((#532394)); +#532394 = SURFACE_STYLE_USAGE(.BOTH.,#532395); +#532395 = SURFACE_SIDE_STYLE('',(#532396)); +#532396 = SURFACE_STYLE_FILL_AREA(#532397); +#532397 = FILL_AREA_STYLE('',(#532398)); +#532398 = FILL_AREA_STYLE_COLOUR('',#517768); +#532399 = OVER_RIDING_STYLED_ITEM('overriding color',(#532400),#65871, + #532362); +#532400 = PRESENTATION_STYLE_ASSIGNMENT((#532401)); +#532401 = SURFACE_STYLE_USAGE(.BOTH.,#532402); +#532402 = SURFACE_SIDE_STYLE('',(#532403)); +#532403 = SURFACE_STYLE_FILL_AREA(#532404); +#532404 = FILL_AREA_STYLE('',(#532405)); +#532405 = FILL_AREA_STYLE_COLOUR('',#517768); +#532406 = OVER_RIDING_STYLED_ITEM('overriding color',(#532407),#65902, + #532362); +#532407 = PRESENTATION_STYLE_ASSIGNMENT((#532408)); +#532408 = SURFACE_STYLE_USAGE(.BOTH.,#532409); +#532409 = SURFACE_SIDE_STYLE('',(#532410)); +#532410 = SURFACE_STYLE_FILL_AREA(#532411); +#532411 = FILL_AREA_STYLE('',(#532412)); +#532412 = FILL_AREA_STYLE_COLOUR('',#517768); +#532413 = OVER_RIDING_STYLED_ITEM('overriding color',(#532414),#65935, + #532362); +#532414 = PRESENTATION_STYLE_ASSIGNMENT((#532415)); +#532415 = SURFACE_STYLE_USAGE(.BOTH.,#532416); +#532416 = SURFACE_SIDE_STYLE('',(#532417)); +#532417 = SURFACE_STYLE_FILL_AREA(#532418); +#532418 = FILL_AREA_STYLE('',(#532419)); +#532419 = FILL_AREA_STYLE_COLOUR('',#517768); +#532420 = OVER_RIDING_STYLED_ITEM('overriding color',(#532421),#65952, + #532362); +#532421 = PRESENTATION_STYLE_ASSIGNMENT((#532422)); +#532422 = SURFACE_STYLE_USAGE(.BOTH.,#532423); +#532423 = SURFACE_SIDE_STYLE('',(#532424)); +#532424 = SURFACE_STYLE_FILL_AREA(#532425); +#532425 = FILL_AREA_STYLE('',(#532426)); +#532426 = FILL_AREA_STYLE_COLOUR('',#517768); +#532427 = OVER_RIDING_STYLED_ITEM('overriding color',(#532428),#65976, + #532362); +#532428 = PRESENTATION_STYLE_ASSIGNMENT((#532429)); +#532429 = SURFACE_STYLE_USAGE(.BOTH.,#532430); +#532430 = SURFACE_SIDE_STYLE('',(#532431)); +#532431 = SURFACE_STYLE_FILL_AREA(#532432); +#532432 = FILL_AREA_STYLE('',(#532433)); +#532433 = FILL_AREA_STYLE_COLOUR('',#517768); +#532434 = OVER_RIDING_STYLED_ITEM('overriding color',(#532435),#66007, + #532362); +#532435 = PRESENTATION_STYLE_ASSIGNMENT((#532436)); +#532436 = SURFACE_STYLE_USAGE(.BOTH.,#532437); +#532437 = SURFACE_SIDE_STYLE('',(#532438)); +#532438 = SURFACE_STYLE_FILL_AREA(#532439); +#532439 = FILL_AREA_STYLE('',(#532440)); +#532440 = FILL_AREA_STYLE_COLOUR('',#517768); +#532441 = OVER_RIDING_STYLED_ITEM('overriding color',(#532442),#66024, + #532362); +#532442 = PRESENTATION_STYLE_ASSIGNMENT((#532443)); +#532443 = SURFACE_STYLE_USAGE(.BOTH.,#532444); +#532444 = SURFACE_SIDE_STYLE('',(#532445)); +#532445 = SURFACE_STYLE_FILL_AREA(#532446); +#532446 = FILL_AREA_STYLE('',(#532447)); +#532447 = FILL_AREA_STYLE_COLOUR('',#517768); +#532448 = OVER_RIDING_STYLED_ITEM('overriding color',(#532449),#66053, + #532362); +#532449 = PRESENTATION_STYLE_ASSIGNMENT((#532450)); +#532450 = SURFACE_STYLE_USAGE(.BOTH.,#532451); +#532451 = SURFACE_SIDE_STYLE('',(#532452)); +#532452 = SURFACE_STYLE_FILL_AREA(#532453); +#532453 = FILL_AREA_STYLE('',(#532454)); +#532454 = FILL_AREA_STYLE_COLOUR('',#517768); +#532455 = OVER_RIDING_STYLED_ITEM('overriding color',(#532456),#66077, + #532362); +#532456 = PRESENTATION_STYLE_ASSIGNMENT((#532457)); +#532457 = SURFACE_STYLE_USAGE(.BOTH.,#532458); +#532458 = SURFACE_SIDE_STYLE('',(#532459)); +#532459 = SURFACE_STYLE_FILL_AREA(#532460); +#532460 = FILL_AREA_STYLE('',(#532461)); +#532461 = FILL_AREA_STYLE_COLOUR('',#517768); +#532462 = OVER_RIDING_STYLED_ITEM('overriding color',(#532463),#66103, + #532362); +#532463 = PRESENTATION_STYLE_ASSIGNMENT((#532464)); +#532464 = SURFACE_STYLE_USAGE(.BOTH.,#532465); +#532465 = SURFACE_SIDE_STYLE('',(#532466)); +#532466 = SURFACE_STYLE_FILL_AREA(#532467); +#532467 = FILL_AREA_STYLE('',(#532468)); +#532468 = FILL_AREA_STYLE_COLOUR('',#517768); +#532469 = OVER_RIDING_STYLED_ITEM('overriding color',(#532470),#66127, + #532362); +#532470 = PRESENTATION_STYLE_ASSIGNMENT((#532471)); +#532471 = SURFACE_STYLE_USAGE(.BOTH.,#532472); +#532472 = SURFACE_SIDE_STYLE('',(#532473)); +#532473 = SURFACE_STYLE_FILL_AREA(#532474); +#532474 = FILL_AREA_STYLE('',(#532475)); +#532475 = FILL_AREA_STYLE_COLOUR('',#517768); +#532476 = OVER_RIDING_STYLED_ITEM('overriding color',(#532477),#66154, + #532362); +#532477 = PRESENTATION_STYLE_ASSIGNMENT((#532478)); +#532478 = SURFACE_STYLE_USAGE(.BOTH.,#532479); +#532479 = SURFACE_SIDE_STYLE('',(#532480)); +#532480 = SURFACE_STYLE_FILL_AREA(#532481); +#532481 = FILL_AREA_STYLE('',(#532482)); +#532482 = FILL_AREA_STYLE_COLOUR('',#517768); +#532483 = OVER_RIDING_STYLED_ITEM('overriding color',(#532484),#66166, + #532362); +#532484 = PRESENTATION_STYLE_ASSIGNMENT((#532485)); +#532485 = SURFACE_STYLE_USAGE(.BOTH.,#532486); +#532486 = SURFACE_SIDE_STYLE('',(#532487)); +#532487 = SURFACE_STYLE_FILL_AREA(#532488); +#532488 = FILL_AREA_STYLE('',(#532489)); +#532489 = FILL_AREA_STYLE_COLOUR('',#517768); +#532490 = OVER_RIDING_STYLED_ITEM('overriding color',(#532491),#66183, + #532362); +#532491 = PRESENTATION_STYLE_ASSIGNMENT((#532492)); +#532492 = SURFACE_STYLE_USAGE(.BOTH.,#532493); +#532493 = SURFACE_SIDE_STYLE('',(#532494)); +#532494 = SURFACE_STYLE_FILL_AREA(#532495); +#532495 = FILL_AREA_STYLE('',(#532496)); +#532496 = FILL_AREA_STYLE_COLOUR('',#517768); +#532497 = STYLED_ITEM('color',(#532498),#66195); +#532498 = PRESENTATION_STYLE_ASSIGNMENT((#532499,#532504)); +#532499 = SURFACE_STYLE_USAGE(.BOTH.,#532500); +#532500 = SURFACE_SIDE_STYLE('',(#532501)); +#532501 = SURFACE_STYLE_FILL_AREA(#532502); +#532502 = FILL_AREA_STYLE('',(#532503)); +#532503 = FILL_AREA_STYLE_COLOUR('',#523837); +#532504 = CURVE_STYLE('',#532505,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532506 = OVER_RIDING_STYLED_ITEM('overriding color',(#532507),#66197, + #532497); +#532507 = PRESENTATION_STYLE_ASSIGNMENT((#532508)); +#532508 = SURFACE_STYLE_USAGE(.BOTH.,#532509); +#532509 = SURFACE_SIDE_STYLE('',(#532510)); +#532510 = SURFACE_STYLE_FILL_AREA(#532511); +#532511 = FILL_AREA_STYLE('',(#532512)); +#532512 = FILL_AREA_STYLE_COLOUR('',#517768); +#532513 = OVER_RIDING_STYLED_ITEM('overriding color',(#532514),#66237, + #532497); +#532514 = PRESENTATION_STYLE_ASSIGNMENT((#532515)); +#532515 = SURFACE_STYLE_USAGE(.BOTH.,#532516); +#532516 = SURFACE_SIDE_STYLE('',(#532517)); +#532517 = SURFACE_STYLE_FILL_AREA(#532518); +#532518 = FILL_AREA_STYLE('',(#532519)); +#532519 = FILL_AREA_STYLE_COLOUR('',#517768); +#532520 = OVER_RIDING_STYLED_ITEM('overriding color',(#532521),#66268, + #532497); +#532521 = PRESENTATION_STYLE_ASSIGNMENT((#532522)); +#532522 = SURFACE_STYLE_USAGE(.BOTH.,#532523); +#532523 = SURFACE_SIDE_STYLE('',(#532524)); +#532524 = SURFACE_STYLE_FILL_AREA(#532525); +#532525 = FILL_AREA_STYLE('',(#532526)); +#532526 = FILL_AREA_STYLE_COLOUR('',#517768); +#532527 = OVER_RIDING_STYLED_ITEM('overriding color',(#532528),#66299, + #532497); +#532528 = PRESENTATION_STYLE_ASSIGNMENT((#532529)); +#532529 = SURFACE_STYLE_USAGE(.BOTH.,#532530); +#532530 = SURFACE_SIDE_STYLE('',(#532531)); +#532531 = SURFACE_STYLE_FILL_AREA(#532532); +#532532 = FILL_AREA_STYLE('',(#532533)); +#532533 = FILL_AREA_STYLE_COLOUR('',#517768); +#532534 = OVER_RIDING_STYLED_ITEM('overriding color',(#532535),#66349, + #532497); +#532535 = PRESENTATION_STYLE_ASSIGNMENT((#532536)); +#532536 = SURFACE_STYLE_USAGE(.BOTH.,#532537); +#532537 = SURFACE_SIDE_STYLE('',(#532538)); +#532538 = SURFACE_STYLE_FILL_AREA(#532539); +#532539 = FILL_AREA_STYLE('',(#532540)); +#532540 = FILL_AREA_STYLE_COLOUR('',#517768); +#532541 = OVER_RIDING_STYLED_ITEM('overriding color',(#532542),#66380, + #532497); +#532542 = PRESENTATION_STYLE_ASSIGNMENT((#532543)); +#532543 = SURFACE_STYLE_USAGE(.BOTH.,#532544); +#532544 = SURFACE_SIDE_STYLE('',(#532545)); +#532545 = SURFACE_STYLE_FILL_AREA(#532546); +#532546 = FILL_AREA_STYLE('',(#532547)); +#532547 = FILL_AREA_STYLE_COLOUR('',#517768); +#532548 = OVER_RIDING_STYLED_ITEM('overriding color',(#532549),#66413, + #532497); +#532549 = PRESENTATION_STYLE_ASSIGNMENT((#532550)); +#532550 = SURFACE_STYLE_USAGE(.BOTH.,#532551); +#532551 = SURFACE_SIDE_STYLE('',(#532552)); +#532552 = SURFACE_STYLE_FILL_AREA(#532553); +#532553 = FILL_AREA_STYLE('',(#532554)); +#532554 = FILL_AREA_STYLE_COLOUR('',#517768); +#532555 = OVER_RIDING_STYLED_ITEM('overriding color',(#532556),#66430, + #532497); +#532556 = PRESENTATION_STYLE_ASSIGNMENT((#532557)); +#532557 = SURFACE_STYLE_USAGE(.BOTH.,#532558); +#532558 = SURFACE_SIDE_STYLE('',(#532559)); +#532559 = SURFACE_STYLE_FILL_AREA(#532560); +#532560 = FILL_AREA_STYLE('',(#532561)); +#532561 = FILL_AREA_STYLE_COLOUR('',#517768); +#532562 = OVER_RIDING_STYLED_ITEM('overriding color',(#532563),#66454, + #532497); +#532563 = PRESENTATION_STYLE_ASSIGNMENT((#532564)); +#532564 = SURFACE_STYLE_USAGE(.BOTH.,#532565); +#532565 = SURFACE_SIDE_STYLE('',(#532566)); +#532566 = SURFACE_STYLE_FILL_AREA(#532567); +#532567 = FILL_AREA_STYLE('',(#532568)); +#532568 = FILL_AREA_STYLE_COLOUR('',#517768); +#532569 = OVER_RIDING_STYLED_ITEM('overriding color',(#532570),#66485, + #532497); +#532570 = PRESENTATION_STYLE_ASSIGNMENT((#532571)); +#532571 = SURFACE_STYLE_USAGE(.BOTH.,#532572); +#532572 = SURFACE_SIDE_STYLE('',(#532573)); +#532573 = SURFACE_STYLE_FILL_AREA(#532574); +#532574 = FILL_AREA_STYLE('',(#532575)); +#532575 = FILL_AREA_STYLE_COLOUR('',#517768); +#532576 = OVER_RIDING_STYLED_ITEM('overriding color',(#532577),#66502, + #532497); +#532577 = PRESENTATION_STYLE_ASSIGNMENT((#532578)); +#532578 = SURFACE_STYLE_USAGE(.BOTH.,#532579); +#532579 = SURFACE_SIDE_STYLE('',(#532580)); +#532580 = SURFACE_STYLE_FILL_AREA(#532581); +#532581 = FILL_AREA_STYLE('',(#532582)); +#532582 = FILL_AREA_STYLE_COLOUR('',#517768); +#532583 = OVER_RIDING_STYLED_ITEM('overriding color',(#532584),#66531, + #532497); +#532584 = PRESENTATION_STYLE_ASSIGNMENT((#532585)); +#532585 = SURFACE_STYLE_USAGE(.BOTH.,#532586); +#532586 = SURFACE_SIDE_STYLE('',(#532587)); +#532587 = SURFACE_STYLE_FILL_AREA(#532588); +#532588 = FILL_AREA_STYLE('',(#532589)); +#532589 = FILL_AREA_STYLE_COLOUR('',#517768); +#532590 = OVER_RIDING_STYLED_ITEM('overriding color',(#532591),#66555, + #532497); +#532591 = PRESENTATION_STYLE_ASSIGNMENT((#532592)); +#532592 = SURFACE_STYLE_USAGE(.BOTH.,#532593); +#532593 = SURFACE_SIDE_STYLE('',(#532594)); +#532594 = SURFACE_STYLE_FILL_AREA(#532595); +#532595 = FILL_AREA_STYLE('',(#532596)); +#532596 = FILL_AREA_STYLE_COLOUR('',#517768); +#532597 = OVER_RIDING_STYLED_ITEM('overriding color',(#532598),#66581, + #532497); +#532598 = PRESENTATION_STYLE_ASSIGNMENT((#532599)); +#532599 = SURFACE_STYLE_USAGE(.BOTH.,#532600); +#532600 = SURFACE_SIDE_STYLE('',(#532601)); +#532601 = SURFACE_STYLE_FILL_AREA(#532602); +#532602 = FILL_AREA_STYLE('',(#532603)); +#532603 = FILL_AREA_STYLE_COLOUR('',#517768); +#532604 = OVER_RIDING_STYLED_ITEM('overriding color',(#532605),#66605, + #532497); +#532605 = PRESENTATION_STYLE_ASSIGNMENT((#532606)); +#532606 = SURFACE_STYLE_USAGE(.BOTH.,#532607); +#532607 = SURFACE_SIDE_STYLE('',(#532608)); +#532608 = SURFACE_STYLE_FILL_AREA(#532609); +#532609 = FILL_AREA_STYLE('',(#532610)); +#532610 = FILL_AREA_STYLE_COLOUR('',#517768); +#532611 = OVER_RIDING_STYLED_ITEM('overriding color',(#532612),#66632, + #532497); +#532612 = PRESENTATION_STYLE_ASSIGNMENT((#532613)); +#532613 = SURFACE_STYLE_USAGE(.BOTH.,#532614); +#532614 = SURFACE_SIDE_STYLE('',(#532615)); +#532615 = SURFACE_STYLE_FILL_AREA(#532616); +#532616 = FILL_AREA_STYLE('',(#532617)); +#532617 = FILL_AREA_STYLE_COLOUR('',#517768); +#532618 = OVER_RIDING_STYLED_ITEM('overriding color',(#532619),#66644, + #532497); +#532619 = PRESENTATION_STYLE_ASSIGNMENT((#532620)); +#532620 = SURFACE_STYLE_USAGE(.BOTH.,#532621); +#532621 = SURFACE_SIDE_STYLE('',(#532622)); +#532622 = SURFACE_STYLE_FILL_AREA(#532623); +#532623 = FILL_AREA_STYLE('',(#532624)); +#532624 = FILL_AREA_STYLE_COLOUR('',#517768); +#532625 = OVER_RIDING_STYLED_ITEM('overriding color',(#532626),#66661, + #532497); +#532626 = PRESENTATION_STYLE_ASSIGNMENT((#532627)); +#532627 = SURFACE_STYLE_USAGE(.BOTH.,#532628); +#532628 = SURFACE_SIDE_STYLE('',(#532629)); +#532629 = SURFACE_STYLE_FILL_AREA(#532630); +#532630 = FILL_AREA_STYLE('',(#532631)); +#532631 = FILL_AREA_STYLE_COLOUR('',#517768); +#532632 = STYLED_ITEM('color',(#532633),#66673); +#532633 = PRESENTATION_STYLE_ASSIGNMENT((#532634,#532639)); +#532634 = SURFACE_STYLE_USAGE(.BOTH.,#532635); +#532635 = SURFACE_SIDE_STYLE('',(#532636)); +#532636 = SURFACE_STYLE_FILL_AREA(#532637); +#532637 = FILL_AREA_STYLE('',(#532638)); +#532638 = FILL_AREA_STYLE_COLOUR('',#523837); +#532639 = CURVE_STYLE('',#532640,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532640 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532641 = OVER_RIDING_STYLED_ITEM('overriding color',(#532642),#66675, + #532632); +#532642 = PRESENTATION_STYLE_ASSIGNMENT((#532643)); +#532643 = SURFACE_STYLE_USAGE(.BOTH.,#532644); +#532644 = SURFACE_SIDE_STYLE('',(#532645)); +#532645 = SURFACE_STYLE_FILL_AREA(#532646); +#532646 = FILL_AREA_STYLE('',(#532647)); +#532647 = FILL_AREA_STYLE_COLOUR('',#517768); +#532648 = OVER_RIDING_STYLED_ITEM('overriding color',(#532649),#66715, + #532632); +#532649 = PRESENTATION_STYLE_ASSIGNMENT((#532650)); +#532650 = SURFACE_STYLE_USAGE(.BOTH.,#532651); +#532651 = SURFACE_SIDE_STYLE('',(#532652)); +#532652 = SURFACE_STYLE_FILL_AREA(#532653); +#532653 = FILL_AREA_STYLE('',(#532654)); +#532654 = FILL_AREA_STYLE_COLOUR('',#517768); +#532655 = OVER_RIDING_STYLED_ITEM('overriding color',(#532656),#66746, + #532632); +#532656 = PRESENTATION_STYLE_ASSIGNMENT((#532657)); +#532657 = SURFACE_STYLE_USAGE(.BOTH.,#532658); +#532658 = SURFACE_SIDE_STYLE('',(#532659)); +#532659 = SURFACE_STYLE_FILL_AREA(#532660); +#532660 = FILL_AREA_STYLE('',(#532661)); +#532661 = FILL_AREA_STYLE_COLOUR('',#517768); +#532662 = OVER_RIDING_STYLED_ITEM('overriding color',(#532663),#66777, + #532632); +#532663 = PRESENTATION_STYLE_ASSIGNMENT((#532664)); +#532664 = SURFACE_STYLE_USAGE(.BOTH.,#532665); +#532665 = SURFACE_SIDE_STYLE('',(#532666)); +#532666 = SURFACE_STYLE_FILL_AREA(#532667); +#532667 = FILL_AREA_STYLE('',(#532668)); +#532668 = FILL_AREA_STYLE_COLOUR('',#517768); +#532669 = OVER_RIDING_STYLED_ITEM('overriding color',(#532670),#66827, + #532632); +#532670 = PRESENTATION_STYLE_ASSIGNMENT((#532671)); +#532671 = SURFACE_STYLE_USAGE(.BOTH.,#532672); +#532672 = SURFACE_SIDE_STYLE('',(#532673)); +#532673 = SURFACE_STYLE_FILL_AREA(#532674); +#532674 = FILL_AREA_STYLE('',(#532675)); +#532675 = FILL_AREA_STYLE_COLOUR('',#517768); +#532676 = OVER_RIDING_STYLED_ITEM('overriding color',(#532677),#66858, + #532632); +#532677 = PRESENTATION_STYLE_ASSIGNMENT((#532678)); +#532678 = SURFACE_STYLE_USAGE(.BOTH.,#532679); +#532679 = SURFACE_SIDE_STYLE('',(#532680)); +#532680 = SURFACE_STYLE_FILL_AREA(#532681); +#532681 = FILL_AREA_STYLE('',(#532682)); +#532682 = FILL_AREA_STYLE_COLOUR('',#517768); +#532683 = OVER_RIDING_STYLED_ITEM('overriding color',(#532684),#66891, + #532632); +#532684 = PRESENTATION_STYLE_ASSIGNMENT((#532685)); +#532685 = SURFACE_STYLE_USAGE(.BOTH.,#532686); +#532686 = SURFACE_SIDE_STYLE('',(#532687)); +#532687 = SURFACE_STYLE_FILL_AREA(#532688); +#532688 = FILL_AREA_STYLE('',(#532689)); +#532689 = FILL_AREA_STYLE_COLOUR('',#517768); +#532690 = OVER_RIDING_STYLED_ITEM('overriding color',(#532691),#66908, + #532632); +#532691 = PRESENTATION_STYLE_ASSIGNMENT((#532692)); +#532692 = SURFACE_STYLE_USAGE(.BOTH.,#532693); +#532693 = SURFACE_SIDE_STYLE('',(#532694)); +#532694 = SURFACE_STYLE_FILL_AREA(#532695); +#532695 = FILL_AREA_STYLE('',(#532696)); +#532696 = FILL_AREA_STYLE_COLOUR('',#517768); +#532697 = OVER_RIDING_STYLED_ITEM('overriding color',(#532698),#66932, + #532632); +#532698 = PRESENTATION_STYLE_ASSIGNMENT((#532699)); +#532699 = SURFACE_STYLE_USAGE(.BOTH.,#532700); +#532700 = SURFACE_SIDE_STYLE('',(#532701)); +#532701 = SURFACE_STYLE_FILL_AREA(#532702); +#532702 = FILL_AREA_STYLE('',(#532703)); +#532703 = FILL_AREA_STYLE_COLOUR('',#517768); +#532704 = OVER_RIDING_STYLED_ITEM('overriding color',(#532705),#66963, + #532632); +#532705 = PRESENTATION_STYLE_ASSIGNMENT((#532706)); +#532706 = SURFACE_STYLE_USAGE(.BOTH.,#532707); +#532707 = SURFACE_SIDE_STYLE('',(#532708)); +#532708 = SURFACE_STYLE_FILL_AREA(#532709); +#532709 = FILL_AREA_STYLE('',(#532710)); +#532710 = FILL_AREA_STYLE_COLOUR('',#517768); +#532711 = OVER_RIDING_STYLED_ITEM('overriding color',(#532712),#66980, + #532632); +#532712 = PRESENTATION_STYLE_ASSIGNMENT((#532713)); +#532713 = SURFACE_STYLE_USAGE(.BOTH.,#532714); +#532714 = SURFACE_SIDE_STYLE('',(#532715)); +#532715 = SURFACE_STYLE_FILL_AREA(#532716); +#532716 = FILL_AREA_STYLE('',(#532717)); +#532717 = FILL_AREA_STYLE_COLOUR('',#517768); +#532718 = OVER_RIDING_STYLED_ITEM('overriding color',(#532719),#67009, + #532632); +#532719 = PRESENTATION_STYLE_ASSIGNMENT((#532720)); +#532720 = SURFACE_STYLE_USAGE(.BOTH.,#532721); +#532721 = SURFACE_SIDE_STYLE('',(#532722)); +#532722 = SURFACE_STYLE_FILL_AREA(#532723); +#532723 = FILL_AREA_STYLE('',(#532724)); +#532724 = FILL_AREA_STYLE_COLOUR('',#517768); +#532725 = OVER_RIDING_STYLED_ITEM('overriding color',(#532726),#67033, + #532632); +#532726 = PRESENTATION_STYLE_ASSIGNMENT((#532727)); +#532727 = SURFACE_STYLE_USAGE(.BOTH.,#532728); +#532728 = SURFACE_SIDE_STYLE('',(#532729)); +#532729 = SURFACE_STYLE_FILL_AREA(#532730); +#532730 = FILL_AREA_STYLE('',(#532731)); +#532731 = FILL_AREA_STYLE_COLOUR('',#517768); +#532732 = OVER_RIDING_STYLED_ITEM('overriding color',(#532733),#67059, + #532632); +#532733 = PRESENTATION_STYLE_ASSIGNMENT((#532734)); +#532734 = SURFACE_STYLE_USAGE(.BOTH.,#532735); +#532735 = SURFACE_SIDE_STYLE('',(#532736)); +#532736 = SURFACE_STYLE_FILL_AREA(#532737); +#532737 = FILL_AREA_STYLE('',(#532738)); +#532738 = FILL_AREA_STYLE_COLOUR('',#517768); +#532739 = OVER_RIDING_STYLED_ITEM('overriding color',(#532740),#67083, + #532632); +#532740 = PRESENTATION_STYLE_ASSIGNMENT((#532741)); +#532741 = SURFACE_STYLE_USAGE(.BOTH.,#532742); +#532742 = SURFACE_SIDE_STYLE('',(#532743)); +#532743 = SURFACE_STYLE_FILL_AREA(#532744); +#532744 = FILL_AREA_STYLE('',(#532745)); +#532745 = FILL_AREA_STYLE_COLOUR('',#517768); +#532746 = OVER_RIDING_STYLED_ITEM('overriding color',(#532747),#67110, + #532632); +#532747 = PRESENTATION_STYLE_ASSIGNMENT((#532748)); +#532748 = SURFACE_STYLE_USAGE(.BOTH.,#532749); +#532749 = SURFACE_SIDE_STYLE('',(#532750)); +#532750 = SURFACE_STYLE_FILL_AREA(#532751); +#532751 = FILL_AREA_STYLE('',(#532752)); +#532752 = FILL_AREA_STYLE_COLOUR('',#517768); +#532753 = OVER_RIDING_STYLED_ITEM('overriding color',(#532754),#67122, + #532632); +#532754 = PRESENTATION_STYLE_ASSIGNMENT((#532755)); +#532755 = SURFACE_STYLE_USAGE(.BOTH.,#532756); +#532756 = SURFACE_SIDE_STYLE('',(#532757)); +#532757 = SURFACE_STYLE_FILL_AREA(#532758); +#532758 = FILL_AREA_STYLE('',(#532759)); +#532759 = FILL_AREA_STYLE_COLOUR('',#517768); +#532760 = OVER_RIDING_STYLED_ITEM('overriding color',(#532761),#67139, + #532632); +#532761 = PRESENTATION_STYLE_ASSIGNMENT((#532762)); +#532762 = SURFACE_STYLE_USAGE(.BOTH.,#532763); +#532763 = SURFACE_SIDE_STYLE('',(#532764)); +#532764 = SURFACE_STYLE_FILL_AREA(#532765); +#532765 = FILL_AREA_STYLE('',(#532766)); +#532766 = FILL_AREA_STYLE_COLOUR('',#517768); +#532767 = STYLED_ITEM('color',(#532768),#67151); +#532768 = PRESENTATION_STYLE_ASSIGNMENT((#532769,#532774)); +#532769 = SURFACE_STYLE_USAGE(.BOTH.,#532770); +#532770 = SURFACE_SIDE_STYLE('',(#532771)); +#532771 = SURFACE_STYLE_FILL_AREA(#532772); +#532772 = FILL_AREA_STYLE('',(#532773)); +#532773 = FILL_AREA_STYLE_COLOUR('',#523837); +#532774 = CURVE_STYLE('',#532775,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532775 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532776 = OVER_RIDING_STYLED_ITEM('overriding color',(#532777),#67153, + #532767); +#532777 = PRESENTATION_STYLE_ASSIGNMENT((#532778)); +#532778 = SURFACE_STYLE_USAGE(.BOTH.,#532779); +#532779 = SURFACE_SIDE_STYLE('',(#532780)); +#532780 = SURFACE_STYLE_FILL_AREA(#532781); +#532781 = FILL_AREA_STYLE('',(#532782)); +#532782 = FILL_AREA_STYLE_COLOUR('',#517768); +#532783 = OVER_RIDING_STYLED_ITEM('overriding color',(#532784),#67193, + #532767); +#532784 = PRESENTATION_STYLE_ASSIGNMENT((#532785)); +#532785 = SURFACE_STYLE_USAGE(.BOTH.,#532786); +#532786 = SURFACE_SIDE_STYLE('',(#532787)); +#532787 = SURFACE_STYLE_FILL_AREA(#532788); +#532788 = FILL_AREA_STYLE('',(#532789)); +#532789 = FILL_AREA_STYLE_COLOUR('',#517768); +#532790 = OVER_RIDING_STYLED_ITEM('overriding color',(#532791),#67233, + #532767); +#532791 = PRESENTATION_STYLE_ASSIGNMENT((#532792)); +#532792 = SURFACE_STYLE_USAGE(.BOTH.,#532793); +#532793 = SURFACE_SIDE_STYLE('',(#532794)); +#532794 = SURFACE_STYLE_FILL_AREA(#532795); +#532795 = FILL_AREA_STYLE('',(#532796)); +#532796 = FILL_AREA_STYLE_COLOUR('',#517768); +#532797 = OVER_RIDING_STYLED_ITEM('overriding color',(#532798),#67255, + #532767); +#532798 = PRESENTATION_STYLE_ASSIGNMENT((#532799)); +#532799 = SURFACE_STYLE_USAGE(.BOTH.,#532800); +#532800 = SURFACE_SIDE_STYLE('',(#532801)); +#532801 = SURFACE_STYLE_FILL_AREA(#532802); +#532802 = FILL_AREA_STYLE('',(#532803)); +#532803 = FILL_AREA_STYLE_COLOUR('',#517768); +#532804 = OVER_RIDING_STYLED_ITEM('overriding color',(#532805),#67277, + #532767); +#532805 = PRESENTATION_STYLE_ASSIGNMENT((#532806)); +#532806 = SURFACE_STYLE_USAGE(.BOTH.,#532807); +#532807 = SURFACE_SIDE_STYLE('',(#532808)); +#532808 = SURFACE_STYLE_FILL_AREA(#532809); +#532809 = FILL_AREA_STYLE('',(#532810)); +#532810 = FILL_AREA_STYLE_COLOUR('',#517768); +#532811 = OVER_RIDING_STYLED_ITEM('overriding color',(#532812),#67289, + #532767); +#532812 = PRESENTATION_STYLE_ASSIGNMENT((#532813)); +#532813 = SURFACE_STYLE_USAGE(.BOTH.,#532814); +#532814 = SURFACE_SIDE_STYLE('',(#532815)); +#532815 = SURFACE_STYLE_FILL_AREA(#532816); +#532816 = FILL_AREA_STYLE('',(#532817)); +#532817 = FILL_AREA_STYLE_COLOUR('',#517768); +#532818 = STYLED_ITEM('color',(#532819),#67301); +#532819 = PRESENTATION_STYLE_ASSIGNMENT((#532820,#532825)); +#532820 = SURFACE_STYLE_USAGE(.BOTH.,#532821); +#532821 = SURFACE_SIDE_STYLE('',(#532822)); +#532822 = SURFACE_STYLE_FILL_AREA(#532823); +#532823 = FILL_AREA_STYLE('',(#532824)); +#532824 = FILL_AREA_STYLE_COLOUR('',#523837); +#532825 = CURVE_STYLE('',#532826,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532826 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532827 = OVER_RIDING_STYLED_ITEM('overriding color',(#532828),#67303, + #532818); +#532828 = PRESENTATION_STYLE_ASSIGNMENT((#532829)); +#532829 = SURFACE_STYLE_USAGE(.BOTH.,#532830); +#532830 = SURFACE_SIDE_STYLE('',(#532831)); +#532831 = SURFACE_STYLE_FILL_AREA(#532832); +#532832 = FILL_AREA_STYLE('',(#532833)); +#532833 = FILL_AREA_STYLE_COLOUR('',#517768); +#532834 = OVER_RIDING_STYLED_ITEM('overriding color',(#532835),#67343, + #532818); +#532835 = PRESENTATION_STYLE_ASSIGNMENT((#532836)); +#532836 = SURFACE_STYLE_USAGE(.BOTH.,#532837); +#532837 = SURFACE_SIDE_STYLE('',(#532838)); +#532838 = SURFACE_STYLE_FILL_AREA(#532839); +#532839 = FILL_AREA_STYLE('',(#532840)); +#532840 = FILL_AREA_STYLE_COLOUR('',#517768); +#532841 = OVER_RIDING_STYLED_ITEM('overriding color',(#532842),#67383, + #532818); +#532842 = PRESENTATION_STYLE_ASSIGNMENT((#532843)); +#532843 = SURFACE_STYLE_USAGE(.BOTH.,#532844); +#532844 = SURFACE_SIDE_STYLE('',(#532845)); +#532845 = SURFACE_STYLE_FILL_AREA(#532846); +#532846 = FILL_AREA_STYLE('',(#532847)); +#532847 = FILL_AREA_STYLE_COLOUR('',#517768); +#532848 = OVER_RIDING_STYLED_ITEM('overriding color',(#532849),#67405, + #532818); +#532849 = PRESENTATION_STYLE_ASSIGNMENT((#532850)); +#532850 = SURFACE_STYLE_USAGE(.BOTH.,#532851); +#532851 = SURFACE_SIDE_STYLE('',(#532852)); +#532852 = SURFACE_STYLE_FILL_AREA(#532853); +#532853 = FILL_AREA_STYLE('',(#532854)); +#532854 = FILL_AREA_STYLE_COLOUR('',#517768); +#532855 = OVER_RIDING_STYLED_ITEM('overriding color',(#532856),#67427, + #532818); +#532856 = PRESENTATION_STYLE_ASSIGNMENT((#532857)); +#532857 = SURFACE_STYLE_USAGE(.BOTH.,#532858); +#532858 = SURFACE_SIDE_STYLE('',(#532859)); +#532859 = SURFACE_STYLE_FILL_AREA(#532860); +#532860 = FILL_AREA_STYLE('',(#532861)); +#532861 = FILL_AREA_STYLE_COLOUR('',#517768); +#532862 = OVER_RIDING_STYLED_ITEM('overriding color',(#532863),#67439, + #532818); +#532863 = PRESENTATION_STYLE_ASSIGNMENT((#532864)); +#532864 = SURFACE_STYLE_USAGE(.BOTH.,#532865); +#532865 = SURFACE_SIDE_STYLE('',(#532866)); +#532866 = SURFACE_STYLE_FILL_AREA(#532867); +#532867 = FILL_AREA_STYLE('',(#532868)); +#532868 = FILL_AREA_STYLE_COLOUR('',#517768); +#532869 = STYLED_ITEM('color',(#532870),#67451); +#532870 = PRESENTATION_STYLE_ASSIGNMENT((#532871,#532876)); +#532871 = SURFACE_STYLE_USAGE(.BOTH.,#532872); +#532872 = SURFACE_SIDE_STYLE('',(#532873)); +#532873 = SURFACE_STYLE_FILL_AREA(#532874); +#532874 = FILL_AREA_STYLE('',(#532875)); +#532875 = FILL_AREA_STYLE_COLOUR('',#523837); +#532876 = CURVE_STYLE('',#532877,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532877 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532878 = OVER_RIDING_STYLED_ITEM('overriding color',(#532879),#67453, + #532869); +#532879 = PRESENTATION_STYLE_ASSIGNMENT((#532880)); +#532880 = SURFACE_STYLE_USAGE(.BOTH.,#532881); +#532881 = SURFACE_SIDE_STYLE('',(#532882)); +#532882 = SURFACE_STYLE_FILL_AREA(#532883); +#532883 = FILL_AREA_STYLE('',(#532884)); +#532884 = FILL_AREA_STYLE_COLOUR('',#517768); +#532885 = OVER_RIDING_STYLED_ITEM('overriding color',(#532886),#67493, + #532869); +#532886 = PRESENTATION_STYLE_ASSIGNMENT((#532887)); +#532887 = SURFACE_STYLE_USAGE(.BOTH.,#532888); +#532888 = SURFACE_SIDE_STYLE('',(#532889)); +#532889 = SURFACE_STYLE_FILL_AREA(#532890); +#532890 = FILL_AREA_STYLE('',(#532891)); +#532891 = FILL_AREA_STYLE_COLOUR('',#517768); +#532892 = OVER_RIDING_STYLED_ITEM('overriding color',(#532893),#67533, + #532869); +#532893 = PRESENTATION_STYLE_ASSIGNMENT((#532894)); +#532894 = SURFACE_STYLE_USAGE(.BOTH.,#532895); +#532895 = SURFACE_SIDE_STYLE('',(#532896)); +#532896 = SURFACE_STYLE_FILL_AREA(#532897); +#532897 = FILL_AREA_STYLE('',(#532898)); +#532898 = FILL_AREA_STYLE_COLOUR('',#517768); +#532899 = OVER_RIDING_STYLED_ITEM('overriding color',(#532900),#67555, + #532869); +#532900 = PRESENTATION_STYLE_ASSIGNMENT((#532901)); +#532901 = SURFACE_STYLE_USAGE(.BOTH.,#532902); +#532902 = SURFACE_SIDE_STYLE('',(#532903)); +#532903 = SURFACE_STYLE_FILL_AREA(#532904); +#532904 = FILL_AREA_STYLE('',(#532905)); +#532905 = FILL_AREA_STYLE_COLOUR('',#517768); +#532906 = OVER_RIDING_STYLED_ITEM('overriding color',(#532907),#67577, + #532869); +#532907 = PRESENTATION_STYLE_ASSIGNMENT((#532908)); +#532908 = SURFACE_STYLE_USAGE(.BOTH.,#532909); +#532909 = SURFACE_SIDE_STYLE('',(#532910)); +#532910 = SURFACE_STYLE_FILL_AREA(#532911); +#532911 = FILL_AREA_STYLE('',(#532912)); +#532912 = FILL_AREA_STYLE_COLOUR('',#517768); +#532913 = OVER_RIDING_STYLED_ITEM('overriding color',(#532914),#67589, + #532869); +#532914 = PRESENTATION_STYLE_ASSIGNMENT((#532915)); +#532915 = SURFACE_STYLE_USAGE(.BOTH.,#532916); +#532916 = SURFACE_SIDE_STYLE('',(#532917)); +#532917 = SURFACE_STYLE_FILL_AREA(#532918); +#532918 = FILL_AREA_STYLE('',(#532919)); +#532919 = FILL_AREA_STYLE_COLOUR('',#517768); +#532920 = STYLED_ITEM('color',(#532921),#67601); +#532921 = PRESENTATION_STYLE_ASSIGNMENT((#532922,#532927)); +#532922 = SURFACE_STYLE_USAGE(.BOTH.,#532923); +#532923 = SURFACE_SIDE_STYLE('',(#532924)); +#532924 = SURFACE_STYLE_FILL_AREA(#532925); +#532925 = FILL_AREA_STYLE('',(#532926)); +#532926 = FILL_AREA_STYLE_COLOUR('',#523837); +#532927 = CURVE_STYLE('',#532928,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532928 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532929 = OVER_RIDING_STYLED_ITEM('overriding color',(#532930),#67603, + #532920); +#532930 = PRESENTATION_STYLE_ASSIGNMENT((#532931)); +#532931 = SURFACE_STYLE_USAGE(.BOTH.,#532932); +#532932 = SURFACE_SIDE_STYLE('',(#532933)); +#532933 = SURFACE_STYLE_FILL_AREA(#532934); +#532934 = FILL_AREA_STYLE('',(#532935)); +#532935 = FILL_AREA_STYLE_COLOUR('',#517768); +#532936 = OVER_RIDING_STYLED_ITEM('overriding color',(#532937),#67643, + #532920); +#532937 = PRESENTATION_STYLE_ASSIGNMENT((#532938)); +#532938 = SURFACE_STYLE_USAGE(.BOTH.,#532939); +#532939 = SURFACE_SIDE_STYLE('',(#532940)); +#532940 = SURFACE_STYLE_FILL_AREA(#532941); +#532941 = FILL_AREA_STYLE('',(#532942)); +#532942 = FILL_AREA_STYLE_COLOUR('',#517768); +#532943 = OVER_RIDING_STYLED_ITEM('overriding color',(#532944),#67683, + #532920); +#532944 = PRESENTATION_STYLE_ASSIGNMENT((#532945)); +#532945 = SURFACE_STYLE_USAGE(.BOTH.,#532946); +#532946 = SURFACE_SIDE_STYLE('',(#532947)); +#532947 = SURFACE_STYLE_FILL_AREA(#532948); +#532948 = FILL_AREA_STYLE('',(#532949)); +#532949 = FILL_AREA_STYLE_COLOUR('',#517768); +#532950 = OVER_RIDING_STYLED_ITEM('overriding color',(#532951),#67705, + #532920); +#532951 = PRESENTATION_STYLE_ASSIGNMENT((#532952)); +#532952 = SURFACE_STYLE_USAGE(.BOTH.,#532953); +#532953 = SURFACE_SIDE_STYLE('',(#532954)); +#532954 = SURFACE_STYLE_FILL_AREA(#532955); +#532955 = FILL_AREA_STYLE('',(#532956)); +#532956 = FILL_AREA_STYLE_COLOUR('',#517768); +#532957 = OVER_RIDING_STYLED_ITEM('overriding color',(#532958),#67727, + #532920); +#532958 = PRESENTATION_STYLE_ASSIGNMENT((#532959)); +#532959 = SURFACE_STYLE_USAGE(.BOTH.,#532960); +#532960 = SURFACE_SIDE_STYLE('',(#532961)); +#532961 = SURFACE_STYLE_FILL_AREA(#532962); +#532962 = FILL_AREA_STYLE('',(#532963)); +#532963 = FILL_AREA_STYLE_COLOUR('',#517768); +#532964 = OVER_RIDING_STYLED_ITEM('overriding color',(#532965),#67739, + #532920); +#532965 = PRESENTATION_STYLE_ASSIGNMENT((#532966)); +#532966 = SURFACE_STYLE_USAGE(.BOTH.,#532967); +#532967 = SURFACE_SIDE_STYLE('',(#532968)); +#532968 = SURFACE_STYLE_FILL_AREA(#532969); +#532969 = FILL_AREA_STYLE('',(#532970)); +#532970 = FILL_AREA_STYLE_COLOUR('',#517768); +#532971 = STYLED_ITEM('color',(#532972),#67751); +#532972 = PRESENTATION_STYLE_ASSIGNMENT((#532973,#532978)); +#532973 = SURFACE_STYLE_USAGE(.BOTH.,#532974); +#532974 = SURFACE_SIDE_STYLE('',(#532975)); +#532975 = SURFACE_STYLE_FILL_AREA(#532976); +#532976 = FILL_AREA_STYLE('',(#532977)); +#532977 = FILL_AREA_STYLE_COLOUR('',#523837); +#532978 = CURVE_STYLE('',#532979,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#532979 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#532980 = OVER_RIDING_STYLED_ITEM('overriding color',(#532981),#67753, + #532971); +#532981 = PRESENTATION_STYLE_ASSIGNMENT((#532982)); +#532982 = SURFACE_STYLE_USAGE(.BOTH.,#532983); +#532983 = SURFACE_SIDE_STYLE('',(#532984)); +#532984 = SURFACE_STYLE_FILL_AREA(#532985); +#532985 = FILL_AREA_STYLE('',(#532986)); +#532986 = FILL_AREA_STYLE_COLOUR('',#517768); +#532987 = OVER_RIDING_STYLED_ITEM('overriding color',(#532988),#67793, + #532971); +#532988 = PRESENTATION_STYLE_ASSIGNMENT((#532989)); +#532989 = SURFACE_STYLE_USAGE(.BOTH.,#532990); +#532990 = SURFACE_SIDE_STYLE('',(#532991)); +#532991 = SURFACE_STYLE_FILL_AREA(#532992); +#532992 = FILL_AREA_STYLE('',(#532993)); +#532993 = FILL_AREA_STYLE_COLOUR('',#517768); +#532994 = OVER_RIDING_STYLED_ITEM('overriding color',(#532995),#67833, + #532971); +#532995 = PRESENTATION_STYLE_ASSIGNMENT((#532996)); +#532996 = SURFACE_STYLE_USAGE(.BOTH.,#532997); +#532997 = SURFACE_SIDE_STYLE('',(#532998)); +#532998 = SURFACE_STYLE_FILL_AREA(#532999); +#532999 = FILL_AREA_STYLE('',(#533000)); +#533000 = FILL_AREA_STYLE_COLOUR('',#517768); +#533001 = OVER_RIDING_STYLED_ITEM('overriding color',(#533002),#67855, + #532971); +#533002 = PRESENTATION_STYLE_ASSIGNMENT((#533003)); +#533003 = SURFACE_STYLE_USAGE(.BOTH.,#533004); +#533004 = SURFACE_SIDE_STYLE('',(#533005)); +#533005 = SURFACE_STYLE_FILL_AREA(#533006); +#533006 = FILL_AREA_STYLE('',(#533007)); +#533007 = FILL_AREA_STYLE_COLOUR('',#517768); +#533008 = OVER_RIDING_STYLED_ITEM('overriding color',(#533009),#67877, + #532971); +#533009 = PRESENTATION_STYLE_ASSIGNMENT((#533010)); +#533010 = SURFACE_STYLE_USAGE(.BOTH.,#533011); +#533011 = SURFACE_SIDE_STYLE('',(#533012)); +#533012 = SURFACE_STYLE_FILL_AREA(#533013); +#533013 = FILL_AREA_STYLE('',(#533014)); +#533014 = FILL_AREA_STYLE_COLOUR('',#517768); +#533015 = OVER_RIDING_STYLED_ITEM('overriding color',(#533016),#67889, + #532971); +#533016 = PRESENTATION_STYLE_ASSIGNMENT((#533017)); +#533017 = SURFACE_STYLE_USAGE(.BOTH.,#533018); +#533018 = SURFACE_SIDE_STYLE('',(#533019)); +#533019 = SURFACE_STYLE_FILL_AREA(#533020); +#533020 = FILL_AREA_STYLE('',(#533021)); +#533021 = FILL_AREA_STYLE_COLOUR('',#517768); +#533022 = STYLED_ITEM('color',(#533023),#67901); +#533023 = PRESENTATION_STYLE_ASSIGNMENT((#533024,#533029)); +#533024 = SURFACE_STYLE_USAGE(.BOTH.,#533025); +#533025 = SURFACE_SIDE_STYLE('',(#533026)); +#533026 = SURFACE_STYLE_FILL_AREA(#533027); +#533027 = FILL_AREA_STYLE('',(#533028)); +#533028 = FILL_AREA_STYLE_COLOUR('',#523837); +#533029 = CURVE_STYLE('',#533030,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#533030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#533031 = OVER_RIDING_STYLED_ITEM('overriding color',(#533032),#67903, + #533022); +#533032 = PRESENTATION_STYLE_ASSIGNMENT((#533033)); +#533033 = SURFACE_STYLE_USAGE(.BOTH.,#533034); +#533034 = SURFACE_SIDE_STYLE('',(#533035)); +#533035 = SURFACE_STYLE_FILL_AREA(#533036); +#533036 = FILL_AREA_STYLE('',(#533037)); +#533037 = FILL_AREA_STYLE_COLOUR('',#517768); +#533038 = OVER_RIDING_STYLED_ITEM('overriding color',(#533039),#67943, + #533022); +#533039 = PRESENTATION_STYLE_ASSIGNMENT((#533040)); +#533040 = SURFACE_STYLE_USAGE(.BOTH.,#533041); +#533041 = SURFACE_SIDE_STYLE('',(#533042)); +#533042 = SURFACE_STYLE_FILL_AREA(#533043); +#533043 = FILL_AREA_STYLE('',(#533044)); +#533044 = FILL_AREA_STYLE_COLOUR('',#517768); +#533045 = OVER_RIDING_STYLED_ITEM('overriding color',(#533046),#67983, + #533022); +#533046 = PRESENTATION_STYLE_ASSIGNMENT((#533047)); +#533047 = SURFACE_STYLE_USAGE(.BOTH.,#533048); +#533048 = SURFACE_SIDE_STYLE('',(#533049)); +#533049 = SURFACE_STYLE_FILL_AREA(#533050); +#533050 = FILL_AREA_STYLE('',(#533051)); +#533051 = FILL_AREA_STYLE_COLOUR('',#517768); +#533052 = OVER_RIDING_STYLED_ITEM('overriding color',(#533053),#68005, + #533022); +#533053 = PRESENTATION_STYLE_ASSIGNMENT((#533054)); +#533054 = SURFACE_STYLE_USAGE(.BOTH.,#533055); +#533055 = SURFACE_SIDE_STYLE('',(#533056)); +#533056 = SURFACE_STYLE_FILL_AREA(#533057); +#533057 = FILL_AREA_STYLE('',(#533058)); +#533058 = FILL_AREA_STYLE_COLOUR('',#517768); +#533059 = OVER_RIDING_STYLED_ITEM('overriding color',(#533060),#68027, + #533022); +#533060 = PRESENTATION_STYLE_ASSIGNMENT((#533061)); +#533061 = SURFACE_STYLE_USAGE(.BOTH.,#533062); +#533062 = SURFACE_SIDE_STYLE('',(#533063)); +#533063 = SURFACE_STYLE_FILL_AREA(#533064); +#533064 = FILL_AREA_STYLE('',(#533065)); +#533065 = FILL_AREA_STYLE_COLOUR('',#517768); +#533066 = OVER_RIDING_STYLED_ITEM('overriding color',(#533067),#68039, + #533022); +#533067 = PRESENTATION_STYLE_ASSIGNMENT((#533068)); +#533068 = SURFACE_STYLE_USAGE(.BOTH.,#533069); +#533069 = SURFACE_SIDE_STYLE('',(#533070)); +#533070 = SURFACE_STYLE_FILL_AREA(#533071); +#533071 = FILL_AREA_STYLE('',(#533072)); +#533072 = FILL_AREA_STYLE_COLOUR('',#517768); +#533073 = STYLED_ITEM('color',(#533074),#68051); +#533074 = PRESENTATION_STYLE_ASSIGNMENT((#533075,#533080)); +#533075 = SURFACE_STYLE_USAGE(.BOTH.,#533076); +#533076 = SURFACE_SIDE_STYLE('',(#533077)); +#533077 = SURFACE_STYLE_FILL_AREA(#533078); +#533078 = FILL_AREA_STYLE('',(#533079)); +#533079 = FILL_AREA_STYLE_COLOUR('',#523837); +#533080 = CURVE_STYLE('',#533081,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#533081 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#533082 = OVER_RIDING_STYLED_ITEM('overriding color',(#533083),#68053, + #533073); +#533083 = PRESENTATION_STYLE_ASSIGNMENT((#533084)); +#533084 = SURFACE_STYLE_USAGE(.BOTH.,#533085); +#533085 = SURFACE_SIDE_STYLE('',(#533086)); +#533086 = SURFACE_STYLE_FILL_AREA(#533087); +#533087 = FILL_AREA_STYLE('',(#533088)); +#533088 = FILL_AREA_STYLE_COLOUR('',#517768); +#533089 = OVER_RIDING_STYLED_ITEM('overriding color',(#533090),#68093, + #533073); +#533090 = PRESENTATION_STYLE_ASSIGNMENT((#533091)); +#533091 = SURFACE_STYLE_USAGE(.BOTH.,#533092); +#533092 = SURFACE_SIDE_STYLE('',(#533093)); +#533093 = SURFACE_STYLE_FILL_AREA(#533094); +#533094 = FILL_AREA_STYLE('',(#533095)); +#533095 = FILL_AREA_STYLE_COLOUR('',#517768); +#533096 = OVER_RIDING_STYLED_ITEM('overriding color',(#533097),#68133, + #533073); +#533097 = PRESENTATION_STYLE_ASSIGNMENT((#533098)); +#533098 = SURFACE_STYLE_USAGE(.BOTH.,#533099); +#533099 = SURFACE_SIDE_STYLE('',(#533100)); +#533100 = SURFACE_STYLE_FILL_AREA(#533101); +#533101 = FILL_AREA_STYLE('',(#533102)); +#533102 = FILL_AREA_STYLE_COLOUR('',#517768); +#533103 = OVER_RIDING_STYLED_ITEM('overriding color',(#533104),#68155, + #533073); +#533104 = PRESENTATION_STYLE_ASSIGNMENT((#533105)); +#533105 = SURFACE_STYLE_USAGE(.BOTH.,#533106); +#533106 = SURFACE_SIDE_STYLE('',(#533107)); +#533107 = SURFACE_STYLE_FILL_AREA(#533108); +#533108 = FILL_AREA_STYLE('',(#533109)); +#533109 = FILL_AREA_STYLE_COLOUR('',#517768); +#533110 = OVER_RIDING_STYLED_ITEM('overriding color',(#533111),#68177, + #533073); +#533111 = PRESENTATION_STYLE_ASSIGNMENT((#533112)); +#533112 = SURFACE_STYLE_USAGE(.BOTH.,#533113); +#533113 = SURFACE_SIDE_STYLE('',(#533114)); +#533114 = SURFACE_STYLE_FILL_AREA(#533115); +#533115 = FILL_AREA_STYLE('',(#533116)); +#533116 = FILL_AREA_STYLE_COLOUR('',#517768); +#533117 = OVER_RIDING_STYLED_ITEM('overriding color',(#533118),#68189, + #533073); +#533118 = PRESENTATION_STYLE_ASSIGNMENT((#533119)); +#533119 = SURFACE_STYLE_USAGE(.BOTH.,#533120); +#533120 = SURFACE_SIDE_STYLE('',(#533121)); +#533121 = SURFACE_STYLE_FILL_AREA(#533122); +#533122 = FILL_AREA_STYLE('',(#533123)); +#533123 = FILL_AREA_STYLE_COLOUR('',#517768); +#533124 = STYLED_ITEM('color',(#533125),#68201); +#533125 = PRESENTATION_STYLE_ASSIGNMENT((#533126,#533131)); +#533126 = SURFACE_STYLE_USAGE(.BOTH.,#533127); +#533127 = SURFACE_SIDE_STYLE('',(#533128)); +#533128 = SURFACE_STYLE_FILL_AREA(#533129); +#533129 = FILL_AREA_STYLE('',(#533130)); +#533130 = FILL_AREA_STYLE_COLOUR('',#523837); +#533131 = CURVE_STYLE('',#533132,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#533132 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#533133 = OVER_RIDING_STYLED_ITEM('overriding color',(#533134),#68203, + #533124); +#533134 = PRESENTATION_STYLE_ASSIGNMENT((#533135)); +#533135 = SURFACE_STYLE_USAGE(.BOTH.,#533136); +#533136 = SURFACE_SIDE_STYLE('',(#533137)); +#533137 = SURFACE_STYLE_FILL_AREA(#533138); +#533138 = FILL_AREA_STYLE('',(#533139)); +#533139 = FILL_AREA_STYLE_COLOUR('',#517768); +#533140 = OVER_RIDING_STYLED_ITEM('overriding color',(#533141),#68243, + #533124); +#533141 = PRESENTATION_STYLE_ASSIGNMENT((#533142)); +#533142 = SURFACE_STYLE_USAGE(.BOTH.,#533143); +#533143 = SURFACE_SIDE_STYLE('',(#533144)); +#533144 = SURFACE_STYLE_FILL_AREA(#533145); +#533145 = FILL_AREA_STYLE('',(#533146)); +#533146 = FILL_AREA_STYLE_COLOUR('',#517768); +#533147 = OVER_RIDING_STYLED_ITEM('overriding color',(#533148),#68283, + #533124); +#533148 = PRESENTATION_STYLE_ASSIGNMENT((#533149)); +#533149 = SURFACE_STYLE_USAGE(.BOTH.,#533150); +#533150 = SURFACE_SIDE_STYLE('',(#533151)); +#533151 = SURFACE_STYLE_FILL_AREA(#533152); +#533152 = FILL_AREA_STYLE('',(#533153)); +#533153 = FILL_AREA_STYLE_COLOUR('',#517768); +#533154 = OVER_RIDING_STYLED_ITEM('overriding color',(#533155),#68305, + #533124); +#533155 = PRESENTATION_STYLE_ASSIGNMENT((#533156)); +#533156 = SURFACE_STYLE_USAGE(.BOTH.,#533157); +#533157 = SURFACE_SIDE_STYLE('',(#533158)); +#533158 = SURFACE_STYLE_FILL_AREA(#533159); +#533159 = FILL_AREA_STYLE('',(#533160)); +#533160 = FILL_AREA_STYLE_COLOUR('',#517768); +#533161 = OVER_RIDING_STYLED_ITEM('overriding color',(#533162),#68327, + #533124); +#533162 = PRESENTATION_STYLE_ASSIGNMENT((#533163)); +#533163 = SURFACE_STYLE_USAGE(.BOTH.,#533164); +#533164 = SURFACE_SIDE_STYLE('',(#533165)); +#533165 = SURFACE_STYLE_FILL_AREA(#533166); +#533166 = FILL_AREA_STYLE('',(#533167)); +#533167 = FILL_AREA_STYLE_COLOUR('',#517768); +#533168 = OVER_RIDING_STYLED_ITEM('overriding color',(#533169),#68339, + #533124); +#533169 = PRESENTATION_STYLE_ASSIGNMENT((#533170)); +#533170 = SURFACE_STYLE_USAGE(.BOTH.,#533171); +#533171 = SURFACE_SIDE_STYLE('',(#533172)); +#533172 = SURFACE_STYLE_FILL_AREA(#533173); +#533173 = FILL_AREA_STYLE('',(#533174)); +#533174 = FILL_AREA_STYLE_COLOUR('',#517768); +#533175 = STYLED_ITEM('color',(#533176),#68351); +#533176 = PRESENTATION_STYLE_ASSIGNMENT((#533177,#533182)); +#533177 = SURFACE_STYLE_USAGE(.BOTH.,#533178); +#533178 = SURFACE_SIDE_STYLE('',(#533179)); +#533179 = SURFACE_STYLE_FILL_AREA(#533180); +#533180 = FILL_AREA_STYLE('',(#533181)); +#533181 = FILL_AREA_STYLE_COLOUR('',#523837); +#533182 = CURVE_STYLE('',#533183,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#533183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#533184 = OVER_RIDING_STYLED_ITEM('overriding color',(#533185),#68353, + #533175); +#533185 = PRESENTATION_STYLE_ASSIGNMENT((#533186)); +#533186 = SURFACE_STYLE_USAGE(.BOTH.,#533187); +#533187 = SURFACE_SIDE_STYLE('',(#533188)); +#533188 = SURFACE_STYLE_FILL_AREA(#533189); +#533189 = FILL_AREA_STYLE('',(#533190)); +#533190 = FILL_AREA_STYLE_COLOUR('',#517768); +#533191 = OVER_RIDING_STYLED_ITEM('overriding color',(#533192),#68393, + #533175); +#533192 = PRESENTATION_STYLE_ASSIGNMENT((#533193)); +#533193 = SURFACE_STYLE_USAGE(.BOTH.,#533194); +#533194 = SURFACE_SIDE_STYLE('',(#533195)); +#533195 = SURFACE_STYLE_FILL_AREA(#533196); +#533196 = FILL_AREA_STYLE('',(#533197)); +#533197 = FILL_AREA_STYLE_COLOUR('',#517768); +#533198 = OVER_RIDING_STYLED_ITEM('overriding color',(#533199),#68433, + #533175); +#533199 = PRESENTATION_STYLE_ASSIGNMENT((#533200)); +#533200 = SURFACE_STYLE_USAGE(.BOTH.,#533201); +#533201 = SURFACE_SIDE_STYLE('',(#533202)); +#533202 = SURFACE_STYLE_FILL_AREA(#533203); +#533203 = FILL_AREA_STYLE('',(#533204)); +#533204 = FILL_AREA_STYLE_COLOUR('',#517768); +#533205 = OVER_RIDING_STYLED_ITEM('overriding color',(#533206),#68455, + #533175); +#533206 = PRESENTATION_STYLE_ASSIGNMENT((#533207)); +#533207 = SURFACE_STYLE_USAGE(.BOTH.,#533208); +#533208 = SURFACE_SIDE_STYLE('',(#533209)); +#533209 = SURFACE_STYLE_FILL_AREA(#533210); +#533210 = FILL_AREA_STYLE('',(#533211)); +#533211 = FILL_AREA_STYLE_COLOUR('',#517768); +#533212 = OVER_RIDING_STYLED_ITEM('overriding color',(#533213),#68477, + #533175); +#533213 = PRESENTATION_STYLE_ASSIGNMENT((#533214)); +#533214 = SURFACE_STYLE_USAGE(.BOTH.,#533215); +#533215 = SURFACE_SIDE_STYLE('',(#533216)); +#533216 = SURFACE_STYLE_FILL_AREA(#533217); +#533217 = FILL_AREA_STYLE('',(#533218)); +#533218 = FILL_AREA_STYLE_COLOUR('',#517768); +#533219 = OVER_RIDING_STYLED_ITEM('overriding color',(#533220),#68489, + #533175); +#533220 = PRESENTATION_STYLE_ASSIGNMENT((#533221)); +#533221 = SURFACE_STYLE_USAGE(.BOTH.,#533222); +#533222 = SURFACE_SIDE_STYLE('',(#533223)); +#533223 = SURFACE_STYLE_FILL_AREA(#533224); +#533224 = FILL_AREA_STYLE('',(#533225)); +#533225 = FILL_AREA_STYLE_COLOUR('',#517768); +#533226 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #533227),#506644); +#533227 = STYLED_ITEM('color',(#533228),#503672); +#533228 = PRESENTATION_STYLE_ASSIGNMENT((#533229)); +#533229 = SURFACE_STYLE_USAGE(.BOTH.,#533230); +#533230 = SURFACE_SIDE_STYLE('',(#533231,#533235)); +#533231 = SURFACE_STYLE_FILL_AREA(#533232); +#533232 = FILL_AREA_STYLE('',(#533233)); +#533233 = FILL_AREA_STYLE_COLOUR('',#533234); +#533234 = COLOUR_RGB('',0.679975718802,0.701410709185,0.574871009914); +#533235 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #533234,(#533236)); +#533236 = SURFACE_STYLE_TRANSPARENT(1.999998092651E-02); +#533237 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #533238,#533246,#533253,#533260,#533267,#533274,#533281,#533288, + #533295,#533302,#533309,#533316,#533323,#533330,#533337,#533344, + #533351,#533358,#533365,#533372,#533379,#533386,#533393,#533400, + #533407,#533414,#533421,#533428,#533435,#533442,#533449,#533456, + #533463,#533470,#533477,#533484,#533491,#533498,#533505,#533512, + #533519,#533526,#533533,#533540,#533547,#533554,#533561,#533568, + #533575,#533582,#533589,#533596,#533603,#533610,#533617,#533624, + #533631,#533638,#533645,#533652,#533659,#533666,#533673,#533680, + #533687,#533694,#533701,#533708,#533715,#533722,#533729,#533736, + #533743,#533750,#533757,#533764,#533771,#533778,#533785,#533792, + #533799,#533806,#533813,#533820,#533827,#533834,#533841,#533848, + #533855,#533862,#533869,#533876,#533883,#533890,#533897,#533904, + #533911,#533918,#533925,#533932,#533939,#533946,#533953,#533960, + #533967,#533974,#533981,#533988,#533995,#534002,#534009,#534016, + #534023,#534030,#534037,#534044,#534051,#534058,#534065,#534072, + #534079,#534086,#534093,#534100,#534107,#534114,#534121,#534128, + #534135,#534142,#534149,#534156,#534163,#534170,#534177,#534184, + #534191,#534198,#534205,#534212,#534219,#534226,#534233,#534240, + #534247,#534254,#534261,#534268,#534275,#534282,#534289,#534296, + #534303,#534310,#534317,#534324,#534331,#534338,#534345,#534352, + #534359,#534366,#534373,#534380,#534387,#534394,#534401,#534408, + #534415,#534422,#534429,#534436,#534443,#534450,#534457,#534464, + #534471,#534478,#534485,#534492,#534499,#534506,#534513,#534520, + #534527,#534534,#534541,#534548,#534555,#534562,#534569,#534576, + #534583,#534590,#534597,#534604,#534611,#534618,#534625,#534632, + #534639,#534646,#534653,#534660,#534667,#534674,#534681,#534688, + #534695,#534702,#534709,#534716,#534723,#534730,#534737,#534744, + #534751,#534758,#534765,#534772,#534779,#534786,#534793,#534800, + #534807,#534814,#534821,#534828,#534835,#534842,#534849,#534856, + #534863,#534870,#534877,#534884,#534891,#534898,#534905,#534912, + #534919,#534926,#534933,#534940,#534947,#534954,#534961,#534968, + #534975,#534982,#534989,#534996,#535003,#535010,#535017,#535024, + #535031,#535038,#535045,#535052,#535059,#535066,#535073,#535080, + #535087,#535094,#535101,#535108,#535115,#535122,#535129,#535136, + #535143,#535150,#535157,#535164,#535171,#535178,#535185,#535192, + #535199,#535206,#535213,#535220,#535227,#535234,#535241,#535248, + #535255,#535262,#535269,#535276,#535283,#535290,#535297,#535304, + #535311,#535318,#535325,#535332,#535339,#535346,#535353,#535360, + #535367,#535374,#535381,#535388,#535395,#535402,#535409,#535416, + #535423,#535430,#535437,#535444,#535451,#535458,#535465,#535472, + #535479,#535486,#535493,#535500,#535507,#535514,#535521,#535528, + #535535,#535542,#535549,#535556,#535563,#535570,#535577,#535584, + #535591,#535598,#535605,#535612,#535619,#535626,#535633,#535640, + #535647,#535654,#535661,#535668,#535675,#535682,#535689,#535696, + #535703,#535710,#535717,#535724,#535731,#535738,#535745,#535752, + #535759,#535766,#535773,#535780,#535787,#535794,#535801,#535808, + #535815,#535822,#535829,#535836,#535843,#535850,#535857,#535864, + #535871,#535878,#535885,#535892,#535899,#535906,#535913,#535920, + #535927,#535934,#535941,#535948,#535955,#535962,#535969,#535976, + #535983,#535990,#535997,#536004,#536011,#536018,#536025,#536032, + #536039,#536046,#536053,#536060,#536067,#536074,#536081,#536088, + #536095,#536102,#536109,#536116),#417968); +#533238 = STYLED_ITEM('color',(#533239),#326355); +#533239 = PRESENTATION_STYLE_ASSIGNMENT((#533240)); +#533240 = SURFACE_STYLE_USAGE(.BOTH.,#533241); +#533241 = SURFACE_SIDE_STYLE('',(#533242)); +#533242 = SURFACE_STYLE_FILL_AREA(#533243); +#533243 = FILL_AREA_STYLE('',(#533244)); +#533244 = FILL_AREA_STYLE_COLOUR('',#533245); +#533245 = COLOUR_RGB('',0.735356983052,0.735356983052,0.735356983052); +#533246 = STYLED_ITEM('color',(#533247),#326447); +#533247 = PRESENTATION_STYLE_ASSIGNMENT((#533248)); +#533248 = SURFACE_STYLE_USAGE(.BOTH.,#533249); +#533249 = SURFACE_SIDE_STYLE('',(#533250)); +#533250 = SURFACE_STYLE_FILL_AREA(#533251); +#533251 = FILL_AREA_STYLE('',(#533252)); +#533252 = FILL_AREA_STYLE_COLOUR('',#533245); +#533253 = STYLED_ITEM('color',(#533254),#326539); +#533254 = PRESENTATION_STYLE_ASSIGNMENT((#533255)); +#533255 = SURFACE_STYLE_USAGE(.BOTH.,#533256); +#533256 = SURFACE_SIDE_STYLE('',(#533257)); +#533257 = SURFACE_STYLE_FILL_AREA(#533258); +#533258 = FILL_AREA_STYLE('',(#533259)); +#533259 = FILL_AREA_STYLE_COLOUR('',#533245); +#533260 = STYLED_ITEM('color',(#533261),#326631); +#533261 = PRESENTATION_STYLE_ASSIGNMENT((#533262)); +#533262 = SURFACE_STYLE_USAGE(.BOTH.,#533263); +#533263 = SURFACE_SIDE_STYLE('',(#533264)); +#533264 = SURFACE_STYLE_FILL_AREA(#533265); +#533265 = FILL_AREA_STYLE('',(#533266)); +#533266 = FILL_AREA_STYLE_COLOUR('',#533245); +#533267 = STYLED_ITEM('color',(#533268),#326723); +#533268 = PRESENTATION_STYLE_ASSIGNMENT((#533269)); +#533269 = SURFACE_STYLE_USAGE(.BOTH.,#533270); +#533270 = SURFACE_SIDE_STYLE('',(#533271)); +#533271 = SURFACE_STYLE_FILL_AREA(#533272); +#533272 = FILL_AREA_STYLE('',(#533273)); +#533273 = FILL_AREA_STYLE_COLOUR('',#533245); +#533274 = STYLED_ITEM('color',(#533275),#326815); +#533275 = PRESENTATION_STYLE_ASSIGNMENT((#533276)); +#533276 = SURFACE_STYLE_USAGE(.BOTH.,#533277); +#533277 = SURFACE_SIDE_STYLE('',(#533278)); +#533278 = SURFACE_STYLE_FILL_AREA(#533279); +#533279 = FILL_AREA_STYLE('',(#533280)); +#533280 = FILL_AREA_STYLE_COLOUR('',#533245); +#533281 = STYLED_ITEM('color',(#533282),#326907); +#533282 = PRESENTATION_STYLE_ASSIGNMENT((#533283)); +#533283 = SURFACE_STYLE_USAGE(.BOTH.,#533284); +#533284 = SURFACE_SIDE_STYLE('',(#533285)); +#533285 = SURFACE_STYLE_FILL_AREA(#533286); +#533286 = FILL_AREA_STYLE('',(#533287)); +#533287 = FILL_AREA_STYLE_COLOUR('',#533245); +#533288 = STYLED_ITEM('color',(#533289),#326999); +#533289 = PRESENTATION_STYLE_ASSIGNMENT((#533290)); +#533290 = SURFACE_STYLE_USAGE(.BOTH.,#533291); +#533291 = SURFACE_SIDE_STYLE('',(#533292)); +#533292 = SURFACE_STYLE_FILL_AREA(#533293); +#533293 = FILL_AREA_STYLE('',(#533294)); +#533294 = FILL_AREA_STYLE_COLOUR('',#533245); +#533295 = STYLED_ITEM('color',(#533296),#327091); +#533296 = PRESENTATION_STYLE_ASSIGNMENT((#533297)); +#533297 = SURFACE_STYLE_USAGE(.BOTH.,#533298); +#533298 = SURFACE_SIDE_STYLE('',(#533299)); +#533299 = SURFACE_STYLE_FILL_AREA(#533300); +#533300 = FILL_AREA_STYLE('',(#533301)); +#533301 = FILL_AREA_STYLE_COLOUR('',#533245); +#533302 = STYLED_ITEM('color',(#533303),#327183); +#533303 = PRESENTATION_STYLE_ASSIGNMENT((#533304)); +#533304 = SURFACE_STYLE_USAGE(.BOTH.,#533305); +#533305 = SURFACE_SIDE_STYLE('',(#533306)); +#533306 = SURFACE_STYLE_FILL_AREA(#533307); +#533307 = FILL_AREA_STYLE('',(#533308)); +#533308 = FILL_AREA_STYLE_COLOUR('',#533245); +#533309 = STYLED_ITEM('color',(#533310),#327275); +#533310 = PRESENTATION_STYLE_ASSIGNMENT((#533311)); +#533311 = SURFACE_STYLE_USAGE(.BOTH.,#533312); +#533312 = SURFACE_SIDE_STYLE('',(#533313)); +#533313 = SURFACE_STYLE_FILL_AREA(#533314); +#533314 = FILL_AREA_STYLE('',(#533315)); +#533315 = FILL_AREA_STYLE_COLOUR('',#533245); +#533316 = STYLED_ITEM('color',(#533317),#327367); +#533317 = PRESENTATION_STYLE_ASSIGNMENT((#533318)); +#533318 = SURFACE_STYLE_USAGE(.BOTH.,#533319); +#533319 = SURFACE_SIDE_STYLE('',(#533320)); +#533320 = SURFACE_STYLE_FILL_AREA(#533321); +#533321 = FILL_AREA_STYLE('',(#533322)); +#533322 = FILL_AREA_STYLE_COLOUR('',#533245); +#533323 = STYLED_ITEM('color',(#533324),#327459); +#533324 = PRESENTATION_STYLE_ASSIGNMENT((#533325)); +#533325 = SURFACE_STYLE_USAGE(.BOTH.,#533326); +#533326 = SURFACE_SIDE_STYLE('',(#533327)); +#533327 = SURFACE_STYLE_FILL_AREA(#533328); +#533328 = FILL_AREA_STYLE('',(#533329)); +#533329 = FILL_AREA_STYLE_COLOUR('',#533245); +#533330 = STYLED_ITEM('color',(#533331),#327551); +#533331 = PRESENTATION_STYLE_ASSIGNMENT((#533332)); +#533332 = SURFACE_STYLE_USAGE(.BOTH.,#533333); +#533333 = SURFACE_SIDE_STYLE('',(#533334)); +#533334 = SURFACE_STYLE_FILL_AREA(#533335); +#533335 = FILL_AREA_STYLE('',(#533336)); +#533336 = FILL_AREA_STYLE_COLOUR('',#533245); +#533337 = STYLED_ITEM('color',(#533338),#327643); +#533338 = PRESENTATION_STYLE_ASSIGNMENT((#533339)); +#533339 = SURFACE_STYLE_USAGE(.BOTH.,#533340); +#533340 = SURFACE_SIDE_STYLE('',(#533341)); +#533341 = SURFACE_STYLE_FILL_AREA(#533342); +#533342 = FILL_AREA_STYLE('',(#533343)); +#533343 = FILL_AREA_STYLE_COLOUR('',#533245); +#533344 = STYLED_ITEM('color',(#533345),#327735); +#533345 = PRESENTATION_STYLE_ASSIGNMENT((#533346)); +#533346 = SURFACE_STYLE_USAGE(.BOTH.,#533347); +#533347 = SURFACE_SIDE_STYLE('',(#533348)); +#533348 = SURFACE_STYLE_FILL_AREA(#533349); +#533349 = FILL_AREA_STYLE('',(#533350)); +#533350 = FILL_AREA_STYLE_COLOUR('',#533245); +#533351 = STYLED_ITEM('color',(#533352),#327827); +#533352 = PRESENTATION_STYLE_ASSIGNMENT((#533353)); +#533353 = SURFACE_STYLE_USAGE(.BOTH.,#533354); +#533354 = SURFACE_SIDE_STYLE('',(#533355)); +#533355 = SURFACE_STYLE_FILL_AREA(#533356); +#533356 = FILL_AREA_STYLE('',(#533357)); +#533357 = FILL_AREA_STYLE_COLOUR('',#533245); +#533358 = STYLED_ITEM('color',(#533359),#327919); +#533359 = PRESENTATION_STYLE_ASSIGNMENT((#533360)); +#533360 = SURFACE_STYLE_USAGE(.BOTH.,#533361); +#533361 = SURFACE_SIDE_STYLE('',(#533362)); +#533362 = SURFACE_STYLE_FILL_AREA(#533363); +#533363 = FILL_AREA_STYLE('',(#533364)); +#533364 = FILL_AREA_STYLE_COLOUR('',#533245); +#533365 = STYLED_ITEM('color',(#533366),#328011); +#533366 = PRESENTATION_STYLE_ASSIGNMENT((#533367)); +#533367 = SURFACE_STYLE_USAGE(.BOTH.,#533368); +#533368 = SURFACE_SIDE_STYLE('',(#533369)); +#533369 = SURFACE_STYLE_FILL_AREA(#533370); +#533370 = FILL_AREA_STYLE('',(#533371)); +#533371 = FILL_AREA_STYLE_COLOUR('',#533245); +#533372 = STYLED_ITEM('color',(#533373),#328103); +#533373 = PRESENTATION_STYLE_ASSIGNMENT((#533374)); +#533374 = SURFACE_STYLE_USAGE(.BOTH.,#533375); +#533375 = SURFACE_SIDE_STYLE('',(#533376)); +#533376 = SURFACE_STYLE_FILL_AREA(#533377); +#533377 = FILL_AREA_STYLE('',(#533378)); +#533378 = FILL_AREA_STYLE_COLOUR('',#533245); +#533379 = STYLED_ITEM('color',(#533380),#328195); +#533380 = PRESENTATION_STYLE_ASSIGNMENT((#533381)); +#533381 = SURFACE_STYLE_USAGE(.BOTH.,#533382); +#533382 = SURFACE_SIDE_STYLE('',(#533383)); +#533383 = SURFACE_STYLE_FILL_AREA(#533384); +#533384 = FILL_AREA_STYLE('',(#533385)); +#533385 = FILL_AREA_STYLE_COLOUR('',#533245); +#533386 = STYLED_ITEM('color',(#533387),#328287); +#533387 = PRESENTATION_STYLE_ASSIGNMENT((#533388)); +#533388 = SURFACE_STYLE_USAGE(.BOTH.,#533389); +#533389 = SURFACE_SIDE_STYLE('',(#533390)); +#533390 = SURFACE_STYLE_FILL_AREA(#533391); +#533391 = FILL_AREA_STYLE('',(#533392)); +#533392 = FILL_AREA_STYLE_COLOUR('',#533245); +#533393 = STYLED_ITEM('color',(#533394),#328379); +#533394 = PRESENTATION_STYLE_ASSIGNMENT((#533395)); +#533395 = SURFACE_STYLE_USAGE(.BOTH.,#533396); +#533396 = SURFACE_SIDE_STYLE('',(#533397)); +#533397 = SURFACE_STYLE_FILL_AREA(#533398); +#533398 = FILL_AREA_STYLE('',(#533399)); +#533399 = FILL_AREA_STYLE_COLOUR('',#533245); +#533400 = STYLED_ITEM('color',(#533401),#328471); +#533401 = PRESENTATION_STYLE_ASSIGNMENT((#533402)); +#533402 = SURFACE_STYLE_USAGE(.BOTH.,#533403); +#533403 = SURFACE_SIDE_STYLE('',(#533404)); +#533404 = SURFACE_STYLE_FILL_AREA(#533405); +#533405 = FILL_AREA_STYLE('',(#533406)); +#533406 = FILL_AREA_STYLE_COLOUR('',#533245); +#533407 = STYLED_ITEM('color',(#533408),#328563); +#533408 = PRESENTATION_STYLE_ASSIGNMENT((#533409)); +#533409 = SURFACE_STYLE_USAGE(.BOTH.,#533410); +#533410 = SURFACE_SIDE_STYLE('',(#533411)); +#533411 = SURFACE_STYLE_FILL_AREA(#533412); +#533412 = FILL_AREA_STYLE('',(#533413)); +#533413 = FILL_AREA_STYLE_COLOUR('',#533245); +#533414 = STYLED_ITEM('color',(#533415),#328655); +#533415 = PRESENTATION_STYLE_ASSIGNMENT((#533416)); +#533416 = SURFACE_STYLE_USAGE(.BOTH.,#533417); +#533417 = SURFACE_SIDE_STYLE('',(#533418)); +#533418 = SURFACE_STYLE_FILL_AREA(#533419); +#533419 = FILL_AREA_STYLE('',(#533420)); +#533420 = FILL_AREA_STYLE_COLOUR('',#533245); +#533421 = STYLED_ITEM('color',(#533422),#328747); +#533422 = PRESENTATION_STYLE_ASSIGNMENT((#533423)); +#533423 = SURFACE_STYLE_USAGE(.BOTH.,#533424); +#533424 = SURFACE_SIDE_STYLE('',(#533425)); +#533425 = SURFACE_STYLE_FILL_AREA(#533426); +#533426 = FILL_AREA_STYLE('',(#533427)); +#533427 = FILL_AREA_STYLE_COLOUR('',#533245); +#533428 = STYLED_ITEM('color',(#533429),#328839); +#533429 = PRESENTATION_STYLE_ASSIGNMENT((#533430)); +#533430 = SURFACE_STYLE_USAGE(.BOTH.,#533431); +#533431 = SURFACE_SIDE_STYLE('',(#533432)); +#533432 = SURFACE_STYLE_FILL_AREA(#533433); +#533433 = FILL_AREA_STYLE('',(#533434)); +#533434 = FILL_AREA_STYLE_COLOUR('',#533245); +#533435 = STYLED_ITEM('color',(#533436),#328931); +#533436 = PRESENTATION_STYLE_ASSIGNMENT((#533437)); +#533437 = SURFACE_STYLE_USAGE(.BOTH.,#533438); +#533438 = SURFACE_SIDE_STYLE('',(#533439)); +#533439 = SURFACE_STYLE_FILL_AREA(#533440); +#533440 = FILL_AREA_STYLE('',(#533441)); +#533441 = FILL_AREA_STYLE_COLOUR('',#533245); +#533442 = STYLED_ITEM('color',(#533443),#329023); +#533443 = PRESENTATION_STYLE_ASSIGNMENT((#533444)); +#533444 = SURFACE_STYLE_USAGE(.BOTH.,#533445); +#533445 = SURFACE_SIDE_STYLE('',(#533446)); +#533446 = SURFACE_STYLE_FILL_AREA(#533447); +#533447 = FILL_AREA_STYLE('',(#533448)); +#533448 = FILL_AREA_STYLE_COLOUR('',#533245); +#533449 = STYLED_ITEM('color',(#533450),#329115); +#533450 = PRESENTATION_STYLE_ASSIGNMENT((#533451)); +#533451 = SURFACE_STYLE_USAGE(.BOTH.,#533452); +#533452 = SURFACE_SIDE_STYLE('',(#533453)); +#533453 = SURFACE_STYLE_FILL_AREA(#533454); +#533454 = FILL_AREA_STYLE('',(#533455)); +#533455 = FILL_AREA_STYLE_COLOUR('',#533245); +#533456 = STYLED_ITEM('color',(#533457),#329405); +#533457 = PRESENTATION_STYLE_ASSIGNMENT((#533458)); +#533458 = SURFACE_STYLE_USAGE(.BOTH.,#533459); +#533459 = SURFACE_SIDE_STYLE('',(#533460)); +#533460 = SURFACE_STYLE_FILL_AREA(#533461); +#533461 = FILL_AREA_STYLE('',(#533462)); +#533462 = FILL_AREA_STYLE_COLOUR('',#533245); +#533463 = STYLED_ITEM('color',(#533464),#329695); +#533464 = PRESENTATION_STYLE_ASSIGNMENT((#533465)); +#533465 = SURFACE_STYLE_USAGE(.BOTH.,#533466); +#533466 = SURFACE_SIDE_STYLE('',(#533467)); +#533467 = SURFACE_STYLE_FILL_AREA(#533468); +#533468 = FILL_AREA_STYLE('',(#533469)); +#533469 = FILL_AREA_STYLE_COLOUR('',#533245); +#533470 = STYLED_ITEM('color',(#533471),#329748); +#533471 = PRESENTATION_STYLE_ASSIGNMENT((#533472)); +#533472 = SURFACE_STYLE_USAGE(.BOTH.,#533473); +#533473 = SURFACE_SIDE_STYLE('',(#533474)); +#533474 = SURFACE_STYLE_FILL_AREA(#533475); +#533475 = FILL_AREA_STYLE('',(#533476)); +#533476 = FILL_AREA_STYLE_COLOUR('',#533245); +#533477 = STYLED_ITEM('color',(#533478),#330038); +#533478 = PRESENTATION_STYLE_ASSIGNMENT((#533479)); +#533479 = SURFACE_STYLE_USAGE(.BOTH.,#533480); +#533480 = SURFACE_SIDE_STYLE('',(#533481)); +#533481 = SURFACE_STYLE_FILL_AREA(#533482); +#533482 = FILL_AREA_STYLE('',(#533483)); +#533483 = FILL_AREA_STYLE_COLOUR('',#533245); +#533484 = STYLED_ITEM('color',(#533485),#330328); +#533485 = PRESENTATION_STYLE_ASSIGNMENT((#533486)); +#533486 = SURFACE_STYLE_USAGE(.BOTH.,#533487); +#533487 = SURFACE_SIDE_STYLE('',(#533488)); +#533488 = SURFACE_STYLE_FILL_AREA(#533489); +#533489 = FILL_AREA_STYLE('',(#533490)); +#533490 = FILL_AREA_STYLE_COLOUR('',#533245); +#533491 = STYLED_ITEM('color',(#533492),#330478); +#533492 = PRESENTATION_STYLE_ASSIGNMENT((#533493)); +#533493 = SURFACE_STYLE_USAGE(.BOTH.,#533494); +#533494 = SURFACE_SIDE_STYLE('',(#533495)); +#533495 = SURFACE_STYLE_FILL_AREA(#533496); +#533496 = FILL_AREA_STYLE('',(#533497)); +#533497 = FILL_AREA_STYLE_COLOUR('',#533245); +#533498 = STYLED_ITEM('color',(#533499),#330628); +#533499 = PRESENTATION_STYLE_ASSIGNMENT((#533500)); +#533500 = SURFACE_STYLE_USAGE(.BOTH.,#533501); +#533501 = SURFACE_SIDE_STYLE('',(#533502)); +#533502 = SURFACE_STYLE_FILL_AREA(#533503); +#533503 = FILL_AREA_STYLE('',(#533504)); +#533504 = FILL_AREA_STYLE_COLOUR('',#533245); +#533505 = STYLED_ITEM('color',(#533506),#330918); +#533506 = PRESENTATION_STYLE_ASSIGNMENT((#533507)); +#533507 = SURFACE_STYLE_USAGE(.BOTH.,#533508); +#533508 = SURFACE_SIDE_STYLE('',(#533509)); +#533509 = SURFACE_STYLE_FILL_AREA(#533510); +#533510 = FILL_AREA_STYLE('',(#533511)); +#533511 = FILL_AREA_STYLE_COLOUR('',#533245); +#533512 = STYLED_ITEM('color',(#533513),#331208); +#533513 = PRESENTATION_STYLE_ASSIGNMENT((#533514)); +#533514 = SURFACE_STYLE_USAGE(.BOTH.,#533515); +#533515 = SURFACE_SIDE_STYLE('',(#533516)); +#533516 = SURFACE_STYLE_FILL_AREA(#533517); +#533517 = FILL_AREA_STYLE('',(#533518)); +#533518 = FILL_AREA_STYLE_COLOUR('',#533245); +#533519 = STYLED_ITEM('color',(#533520),#331498); +#533520 = PRESENTATION_STYLE_ASSIGNMENT((#533521)); +#533521 = SURFACE_STYLE_USAGE(.BOTH.,#533522); +#533522 = SURFACE_SIDE_STYLE('',(#533523)); +#533523 = SURFACE_STYLE_FILL_AREA(#533524); +#533524 = FILL_AREA_STYLE('',(#533525)); +#533525 = FILL_AREA_STYLE_COLOUR('',#533245); +#533526 = STYLED_ITEM('color',(#533527),#331788); +#533527 = PRESENTATION_STYLE_ASSIGNMENT((#533528)); +#533528 = SURFACE_STYLE_USAGE(.BOTH.,#533529); +#533529 = SURFACE_SIDE_STYLE('',(#533530)); +#533530 = SURFACE_STYLE_FILL_AREA(#533531); +#533531 = FILL_AREA_STYLE('',(#533532)); +#533532 = FILL_AREA_STYLE_COLOUR('',#533245); +#533533 = STYLED_ITEM('color',(#533534),#332078); +#533534 = PRESENTATION_STYLE_ASSIGNMENT((#533535)); +#533535 = SURFACE_STYLE_USAGE(.BOTH.,#533536); +#533536 = SURFACE_SIDE_STYLE('',(#533537)); +#533537 = SURFACE_STYLE_FILL_AREA(#533538); +#533538 = FILL_AREA_STYLE('',(#533539)); +#533539 = FILL_AREA_STYLE_COLOUR('',#533245); +#533540 = STYLED_ITEM('color',(#533541),#332368); +#533541 = PRESENTATION_STYLE_ASSIGNMENT((#533542)); +#533542 = SURFACE_STYLE_USAGE(.BOTH.,#533543); +#533543 = SURFACE_SIDE_STYLE('',(#533544)); +#533544 = SURFACE_STYLE_FILL_AREA(#533545); +#533545 = FILL_AREA_STYLE('',(#533546)); +#533546 = FILL_AREA_STYLE_COLOUR('',#533245); +#533547 = STYLED_ITEM('color',(#533548),#332658); +#533548 = PRESENTATION_STYLE_ASSIGNMENT((#533549)); +#533549 = SURFACE_STYLE_USAGE(.BOTH.,#533550); +#533550 = SURFACE_SIDE_STYLE('',(#533551)); +#533551 = SURFACE_STYLE_FILL_AREA(#533552); +#533552 = FILL_AREA_STYLE('',(#533553)); +#533553 = FILL_AREA_STYLE_COLOUR('',#533245); +#533554 = STYLED_ITEM('color',(#533555),#332948); +#533555 = PRESENTATION_STYLE_ASSIGNMENT((#533556)); +#533556 = SURFACE_STYLE_USAGE(.BOTH.,#533557); +#533557 = SURFACE_SIDE_STYLE('',(#533558)); +#533558 = SURFACE_STYLE_FILL_AREA(#533559); +#533559 = FILL_AREA_STYLE('',(#533560)); +#533560 = FILL_AREA_STYLE_COLOUR('',#533245); +#533561 = STYLED_ITEM('color',(#533562),#333238); +#533562 = PRESENTATION_STYLE_ASSIGNMENT((#533563)); +#533563 = SURFACE_STYLE_USAGE(.BOTH.,#533564); +#533564 = SURFACE_SIDE_STYLE('',(#533565)); +#533565 = SURFACE_STYLE_FILL_AREA(#533566); +#533566 = FILL_AREA_STYLE('',(#533567)); +#533567 = FILL_AREA_STYLE_COLOUR('',#533245); +#533568 = STYLED_ITEM('color',(#533569),#333330); +#533569 = PRESENTATION_STYLE_ASSIGNMENT((#533570)); +#533570 = SURFACE_STYLE_USAGE(.BOTH.,#533571); +#533571 = SURFACE_SIDE_STYLE('',(#533572)); +#533572 = SURFACE_STYLE_FILL_AREA(#533573); +#533573 = FILL_AREA_STYLE('',(#533574)); +#533574 = FILL_AREA_STYLE_COLOUR('',#533245); +#533575 = STYLED_ITEM('color',(#533576),#333422); +#533576 = PRESENTATION_STYLE_ASSIGNMENT((#533577)); +#533577 = SURFACE_STYLE_USAGE(.BOTH.,#533578); +#533578 = SURFACE_SIDE_STYLE('',(#533579)); +#533579 = SURFACE_STYLE_FILL_AREA(#533580); +#533580 = FILL_AREA_STYLE('',(#533581)); +#533581 = FILL_AREA_STYLE_COLOUR('',#533245); +#533582 = STYLED_ITEM('color',(#533583),#333514); +#533583 = PRESENTATION_STYLE_ASSIGNMENT((#533584)); +#533584 = SURFACE_STYLE_USAGE(.BOTH.,#533585); +#533585 = SURFACE_SIDE_STYLE('',(#533586)); +#533586 = SURFACE_STYLE_FILL_AREA(#533587); +#533587 = FILL_AREA_STYLE('',(#533588)); +#533588 = FILL_AREA_STYLE_COLOUR('',#533245); +#533589 = STYLED_ITEM('color',(#533590),#333606); +#533590 = PRESENTATION_STYLE_ASSIGNMENT((#533591)); +#533591 = SURFACE_STYLE_USAGE(.BOTH.,#533592); +#533592 = SURFACE_SIDE_STYLE('',(#533593)); +#533593 = SURFACE_STYLE_FILL_AREA(#533594); +#533594 = FILL_AREA_STYLE('',(#533595)); +#533595 = FILL_AREA_STYLE_COLOUR('',#533245); +#533596 = STYLED_ITEM('color',(#533597),#333698); +#533597 = PRESENTATION_STYLE_ASSIGNMENT((#533598)); +#533598 = SURFACE_STYLE_USAGE(.BOTH.,#533599); +#533599 = SURFACE_SIDE_STYLE('',(#533600)); +#533600 = SURFACE_STYLE_FILL_AREA(#533601); +#533601 = FILL_AREA_STYLE('',(#533602)); +#533602 = FILL_AREA_STYLE_COLOUR('',#533245); +#533603 = STYLED_ITEM('color',(#533604),#333790); +#533604 = PRESENTATION_STYLE_ASSIGNMENT((#533605)); +#533605 = SURFACE_STYLE_USAGE(.BOTH.,#533606); +#533606 = SURFACE_SIDE_STYLE('',(#533607)); +#533607 = SURFACE_STYLE_FILL_AREA(#533608); +#533608 = FILL_AREA_STYLE('',(#533609)); +#533609 = FILL_AREA_STYLE_COLOUR('',#533245); +#533610 = STYLED_ITEM('color',(#533611),#333882); +#533611 = PRESENTATION_STYLE_ASSIGNMENT((#533612)); +#533612 = SURFACE_STYLE_USAGE(.BOTH.,#533613); +#533613 = SURFACE_SIDE_STYLE('',(#533614)); +#533614 = SURFACE_STYLE_FILL_AREA(#533615); +#533615 = FILL_AREA_STYLE('',(#533616)); +#533616 = FILL_AREA_STYLE_COLOUR('',#533245); +#533617 = STYLED_ITEM('color',(#533618),#333974); +#533618 = PRESENTATION_STYLE_ASSIGNMENT((#533619)); +#533619 = SURFACE_STYLE_USAGE(.BOTH.,#533620); +#533620 = SURFACE_SIDE_STYLE('',(#533621)); +#533621 = SURFACE_STYLE_FILL_AREA(#533622); +#533622 = FILL_AREA_STYLE('',(#533623)); +#533623 = FILL_AREA_STYLE_COLOUR('',#533245); +#533624 = STYLED_ITEM('color',(#533625),#334066); +#533625 = PRESENTATION_STYLE_ASSIGNMENT((#533626)); +#533626 = SURFACE_STYLE_USAGE(.BOTH.,#533627); +#533627 = SURFACE_SIDE_STYLE('',(#533628)); +#533628 = SURFACE_STYLE_FILL_AREA(#533629); +#533629 = FILL_AREA_STYLE('',(#533630)); +#533630 = FILL_AREA_STYLE_COLOUR('',#533245); +#533631 = STYLED_ITEM('color',(#533632),#334158); +#533632 = PRESENTATION_STYLE_ASSIGNMENT((#533633)); +#533633 = SURFACE_STYLE_USAGE(.BOTH.,#533634); +#533634 = SURFACE_SIDE_STYLE('',(#533635)); +#533635 = SURFACE_STYLE_FILL_AREA(#533636); +#533636 = FILL_AREA_STYLE('',(#533637)); +#533637 = FILL_AREA_STYLE_COLOUR('',#533245); +#533638 = STYLED_ITEM('color',(#533639),#334250); +#533639 = PRESENTATION_STYLE_ASSIGNMENT((#533640)); +#533640 = SURFACE_STYLE_USAGE(.BOTH.,#533641); +#533641 = SURFACE_SIDE_STYLE('',(#533642)); +#533642 = SURFACE_STYLE_FILL_AREA(#533643); +#533643 = FILL_AREA_STYLE('',(#533644)); +#533644 = FILL_AREA_STYLE_COLOUR('',#533245); +#533645 = STYLED_ITEM('color',(#533646),#334342); +#533646 = PRESENTATION_STYLE_ASSIGNMENT((#533647)); +#533647 = SURFACE_STYLE_USAGE(.BOTH.,#533648); +#533648 = SURFACE_SIDE_STYLE('',(#533649)); +#533649 = SURFACE_STYLE_FILL_AREA(#533650); +#533650 = FILL_AREA_STYLE('',(#533651)); +#533651 = FILL_AREA_STYLE_COLOUR('',#533245); +#533652 = STYLED_ITEM('color',(#533653),#334434); +#533653 = PRESENTATION_STYLE_ASSIGNMENT((#533654)); +#533654 = SURFACE_STYLE_USAGE(.BOTH.,#533655); +#533655 = SURFACE_SIDE_STYLE('',(#533656)); +#533656 = SURFACE_STYLE_FILL_AREA(#533657); +#533657 = FILL_AREA_STYLE('',(#533658)); +#533658 = FILL_AREA_STYLE_COLOUR('',#533245); +#533659 = STYLED_ITEM('color',(#533660),#334526); +#533660 = PRESENTATION_STYLE_ASSIGNMENT((#533661)); +#533661 = SURFACE_STYLE_USAGE(.BOTH.,#533662); +#533662 = SURFACE_SIDE_STYLE('',(#533663)); +#533663 = SURFACE_STYLE_FILL_AREA(#533664); +#533664 = FILL_AREA_STYLE('',(#533665)); +#533665 = FILL_AREA_STYLE_COLOUR('',#533245); +#533666 = STYLED_ITEM('color',(#533667),#334618); +#533667 = PRESENTATION_STYLE_ASSIGNMENT((#533668)); +#533668 = SURFACE_STYLE_USAGE(.BOTH.,#533669); +#533669 = SURFACE_SIDE_STYLE('',(#533670)); +#533670 = SURFACE_STYLE_FILL_AREA(#533671); +#533671 = FILL_AREA_STYLE('',(#533672)); +#533672 = FILL_AREA_STYLE_COLOUR('',#533245); +#533673 = STYLED_ITEM('color',(#533674),#334710); +#533674 = PRESENTATION_STYLE_ASSIGNMENT((#533675)); +#533675 = SURFACE_STYLE_USAGE(.BOTH.,#533676); +#533676 = SURFACE_SIDE_STYLE('',(#533677)); +#533677 = SURFACE_STYLE_FILL_AREA(#533678); +#533678 = FILL_AREA_STYLE('',(#533679)); +#533679 = FILL_AREA_STYLE_COLOUR('',#533245); +#533680 = STYLED_ITEM('color',(#533681),#334802); +#533681 = PRESENTATION_STYLE_ASSIGNMENT((#533682)); +#533682 = SURFACE_STYLE_USAGE(.BOTH.,#533683); +#533683 = SURFACE_SIDE_STYLE('',(#533684)); +#533684 = SURFACE_STYLE_FILL_AREA(#533685); +#533685 = FILL_AREA_STYLE('',(#533686)); +#533686 = FILL_AREA_STYLE_COLOUR('',#533245); +#533687 = STYLED_ITEM('color',(#533688),#334894); +#533688 = PRESENTATION_STYLE_ASSIGNMENT((#533689)); +#533689 = SURFACE_STYLE_USAGE(.BOTH.,#533690); +#533690 = SURFACE_SIDE_STYLE('',(#533691)); +#533691 = SURFACE_STYLE_FILL_AREA(#533692); +#533692 = FILL_AREA_STYLE('',(#533693)); +#533693 = FILL_AREA_STYLE_COLOUR('',#533245); +#533694 = STYLED_ITEM('color',(#533695),#334947); +#533695 = PRESENTATION_STYLE_ASSIGNMENT((#533696)); +#533696 = SURFACE_STYLE_USAGE(.BOTH.,#533697); +#533697 = SURFACE_SIDE_STYLE('',(#533698)); +#533698 = SURFACE_STYLE_FILL_AREA(#533699); +#533699 = FILL_AREA_STYLE('',(#533700)); +#533700 = FILL_AREA_STYLE_COLOUR('',#533245); +#533701 = STYLED_ITEM('color',(#533702),#335237); +#533702 = PRESENTATION_STYLE_ASSIGNMENT((#533703)); +#533703 = SURFACE_STYLE_USAGE(.BOTH.,#533704); +#533704 = SURFACE_SIDE_STYLE('',(#533705)); +#533705 = SURFACE_STYLE_FILL_AREA(#533706); +#533706 = FILL_AREA_STYLE('',(#533707)); +#533707 = FILL_AREA_STYLE_COLOUR('',#533245); +#533708 = STYLED_ITEM('color',(#533709),#335527); +#533709 = PRESENTATION_STYLE_ASSIGNMENT((#533710)); +#533710 = SURFACE_STYLE_USAGE(.BOTH.,#533711); +#533711 = SURFACE_SIDE_STYLE('',(#533712)); +#533712 = SURFACE_STYLE_FILL_AREA(#533713); +#533713 = FILL_AREA_STYLE('',(#533714)); +#533714 = FILL_AREA_STYLE_COLOUR('',#533245); +#533715 = STYLED_ITEM('color',(#533716),#335817); +#533716 = PRESENTATION_STYLE_ASSIGNMENT((#533717)); +#533717 = SURFACE_STYLE_USAGE(.BOTH.,#533718); +#533718 = SURFACE_SIDE_STYLE('',(#533719)); +#533719 = SURFACE_STYLE_FILL_AREA(#533720); +#533720 = FILL_AREA_STYLE('',(#533721)); +#533721 = FILL_AREA_STYLE_COLOUR('',#533245); +#533722 = STYLED_ITEM('color',(#533723),#336107); +#533723 = PRESENTATION_STYLE_ASSIGNMENT((#533724)); +#533724 = SURFACE_STYLE_USAGE(.BOTH.,#533725); +#533725 = SURFACE_SIDE_STYLE('',(#533726)); +#533726 = SURFACE_STYLE_FILL_AREA(#533727); +#533727 = FILL_AREA_STYLE('',(#533728)); +#533728 = FILL_AREA_STYLE_COLOUR('',#533245); +#533729 = STYLED_ITEM('color',(#533730),#336160); +#533730 = PRESENTATION_STYLE_ASSIGNMENT((#533731)); +#533731 = SURFACE_STYLE_USAGE(.BOTH.,#533732); +#533732 = SURFACE_SIDE_STYLE('',(#533733)); +#533733 = SURFACE_STYLE_FILL_AREA(#533734); +#533734 = FILL_AREA_STYLE('',(#533735)); +#533735 = FILL_AREA_STYLE_COLOUR('',#533245); +#533736 = STYLED_ITEM('color',(#533737),#336450); +#533737 = PRESENTATION_STYLE_ASSIGNMENT((#533738)); +#533738 = SURFACE_STYLE_USAGE(.BOTH.,#533739); +#533739 = SURFACE_SIDE_STYLE('',(#533740)); +#533740 = SURFACE_STYLE_FILL_AREA(#533741); +#533741 = FILL_AREA_STYLE('',(#533742)); +#533742 = FILL_AREA_STYLE_COLOUR('',#533245); +#533743 = STYLED_ITEM('color',(#533744),#336740); +#533744 = PRESENTATION_STYLE_ASSIGNMENT((#533745)); +#533745 = SURFACE_STYLE_USAGE(.BOTH.,#533746); +#533746 = SURFACE_SIDE_STYLE('',(#533747)); +#533747 = SURFACE_STYLE_FILL_AREA(#533748); +#533748 = FILL_AREA_STYLE('',(#533749)); +#533749 = FILL_AREA_STYLE_COLOUR('',#533245); +#533750 = STYLED_ITEM('color',(#533751),#337030); +#533751 = PRESENTATION_STYLE_ASSIGNMENT((#533752)); +#533752 = SURFACE_STYLE_USAGE(.BOTH.,#533753); +#533753 = SURFACE_SIDE_STYLE('',(#533754)); +#533754 = SURFACE_STYLE_FILL_AREA(#533755); +#533755 = FILL_AREA_STYLE('',(#533756)); +#533756 = FILL_AREA_STYLE_COLOUR('',#533245); +#533757 = STYLED_ITEM('color',(#533758),#337320); +#533758 = PRESENTATION_STYLE_ASSIGNMENT((#533759)); +#533759 = SURFACE_STYLE_USAGE(.BOTH.,#533760); +#533760 = SURFACE_SIDE_STYLE('',(#533761)); +#533761 = SURFACE_STYLE_FILL_AREA(#533762); +#533762 = FILL_AREA_STYLE('',(#533763)); +#533763 = FILL_AREA_STYLE_COLOUR('',#533245); +#533764 = STYLED_ITEM('color',(#533765),#337373); +#533765 = PRESENTATION_STYLE_ASSIGNMENT((#533766)); +#533766 = SURFACE_STYLE_USAGE(.BOTH.,#533767); +#533767 = SURFACE_SIDE_STYLE('',(#533768)); +#533768 = SURFACE_STYLE_FILL_AREA(#533769); +#533769 = FILL_AREA_STYLE('',(#533770)); +#533770 = FILL_AREA_STYLE_COLOUR('',#533245); +#533771 = STYLED_ITEM('color',(#533772),#337426); +#533772 = PRESENTATION_STYLE_ASSIGNMENT((#533773)); +#533773 = SURFACE_STYLE_USAGE(.BOTH.,#533774); +#533774 = SURFACE_SIDE_STYLE('',(#533775)); +#533775 = SURFACE_STYLE_FILL_AREA(#533776); +#533776 = FILL_AREA_STYLE('',(#533777)); +#533777 = FILL_AREA_STYLE_COLOUR('',#533245); +#533778 = STYLED_ITEM('color',(#533779),#337576); +#533779 = PRESENTATION_STYLE_ASSIGNMENT((#533780)); +#533780 = SURFACE_STYLE_USAGE(.BOTH.,#533781); +#533781 = SURFACE_SIDE_STYLE('',(#533782)); +#533782 = SURFACE_STYLE_FILL_AREA(#533783); +#533783 = FILL_AREA_STYLE('',(#533784)); +#533784 = FILL_AREA_STYLE_COLOUR('',#533245); +#533785 = STYLED_ITEM('color',(#533786),#337866); +#533786 = PRESENTATION_STYLE_ASSIGNMENT((#533787)); +#533787 = SURFACE_STYLE_USAGE(.BOTH.,#533788); +#533788 = SURFACE_SIDE_STYLE('',(#533789)); +#533789 = SURFACE_STYLE_FILL_AREA(#533790); +#533790 = FILL_AREA_STYLE('',(#533791)); +#533791 = FILL_AREA_STYLE_COLOUR('',#533245); +#533792 = STYLED_ITEM('color',(#533793),#338156); +#533793 = PRESENTATION_STYLE_ASSIGNMENT((#533794)); +#533794 = SURFACE_STYLE_USAGE(.BOTH.,#533795); +#533795 = SURFACE_SIDE_STYLE('',(#533796)); +#533796 = SURFACE_STYLE_FILL_AREA(#533797); +#533797 = FILL_AREA_STYLE('',(#533798)); +#533798 = FILL_AREA_STYLE_COLOUR('',#533245); +#533799 = STYLED_ITEM('color',(#533800),#338306); +#533800 = PRESENTATION_STYLE_ASSIGNMENT((#533801)); +#533801 = SURFACE_STYLE_USAGE(.BOTH.,#533802); +#533802 = SURFACE_SIDE_STYLE('',(#533803)); +#533803 = SURFACE_STYLE_FILL_AREA(#533804); +#533804 = FILL_AREA_STYLE('',(#533805)); +#533805 = FILL_AREA_STYLE_COLOUR('',#533245); +#533806 = STYLED_ITEM('color',(#533807),#338596); +#533807 = PRESENTATION_STYLE_ASSIGNMENT((#533808)); +#533808 = SURFACE_STYLE_USAGE(.BOTH.,#533809); +#533809 = SURFACE_SIDE_STYLE('',(#533810)); +#533810 = SURFACE_STYLE_FILL_AREA(#533811); +#533811 = FILL_AREA_STYLE('',(#533812)); +#533812 = FILL_AREA_STYLE_COLOUR('',#533245); +#533813 = STYLED_ITEM('color',(#533814),#338886); +#533814 = PRESENTATION_STYLE_ASSIGNMENT((#533815)); +#533815 = SURFACE_STYLE_USAGE(.BOTH.,#533816); +#533816 = SURFACE_SIDE_STYLE('',(#533817)); +#533817 = SURFACE_STYLE_FILL_AREA(#533818); +#533818 = FILL_AREA_STYLE('',(#533819)); +#533819 = FILL_AREA_STYLE_COLOUR('',#533245); +#533820 = STYLED_ITEM('color',(#533821),#339036); +#533821 = PRESENTATION_STYLE_ASSIGNMENT((#533822)); +#533822 = SURFACE_STYLE_USAGE(.BOTH.,#533823); +#533823 = SURFACE_SIDE_STYLE('',(#533824)); +#533824 = SURFACE_STYLE_FILL_AREA(#533825); +#533825 = FILL_AREA_STYLE('',(#533826)); +#533826 = FILL_AREA_STYLE_COLOUR('',#533245); +#533827 = STYLED_ITEM('color',(#533828),#339326); +#533828 = PRESENTATION_STYLE_ASSIGNMENT((#533829)); +#533829 = SURFACE_STYLE_USAGE(.BOTH.,#533830); +#533830 = SURFACE_SIDE_STYLE('',(#533831)); +#533831 = SURFACE_STYLE_FILL_AREA(#533832); +#533832 = FILL_AREA_STYLE('',(#533833)); +#533833 = FILL_AREA_STYLE_COLOUR('',#533245); +#533834 = STYLED_ITEM('color',(#533835),#339616); +#533835 = PRESENTATION_STYLE_ASSIGNMENT((#533836)); +#533836 = SURFACE_STYLE_USAGE(.BOTH.,#533837); +#533837 = SURFACE_SIDE_STYLE('',(#533838)); +#533838 = SURFACE_STYLE_FILL_AREA(#533839); +#533839 = FILL_AREA_STYLE('',(#533840)); +#533840 = FILL_AREA_STYLE_COLOUR('',#533245); +#533841 = STYLED_ITEM('color',(#533842),#339766); +#533842 = PRESENTATION_STYLE_ASSIGNMENT((#533843)); +#533843 = SURFACE_STYLE_USAGE(.BOTH.,#533844); +#533844 = SURFACE_SIDE_STYLE('',(#533845)); +#533845 = SURFACE_STYLE_FILL_AREA(#533846); +#533846 = FILL_AREA_STYLE('',(#533847)); +#533847 = FILL_AREA_STYLE_COLOUR('',#533245); +#533848 = STYLED_ITEM('color',(#533849),#340056); +#533849 = PRESENTATION_STYLE_ASSIGNMENT((#533850)); +#533850 = SURFACE_STYLE_USAGE(.BOTH.,#533851); +#533851 = SURFACE_SIDE_STYLE('',(#533852)); +#533852 = SURFACE_STYLE_FILL_AREA(#533853); +#533853 = FILL_AREA_STYLE('',(#533854)); +#533854 = FILL_AREA_STYLE_COLOUR('',#533245); +#533855 = STYLED_ITEM('color',(#533856),#340206); +#533856 = PRESENTATION_STYLE_ASSIGNMENT((#533857)); +#533857 = SURFACE_STYLE_USAGE(.BOTH.,#533858); +#533858 = SURFACE_SIDE_STYLE('',(#533859)); +#533859 = SURFACE_STYLE_FILL_AREA(#533860); +#533860 = FILL_AREA_STYLE('',(#533861)); +#533861 = FILL_AREA_STYLE_COLOUR('',#533245); +#533862 = STYLED_ITEM('color',(#533863),#340356); +#533863 = PRESENTATION_STYLE_ASSIGNMENT((#533864)); +#533864 = SURFACE_STYLE_USAGE(.BOTH.,#533865); +#533865 = SURFACE_SIDE_STYLE('',(#533866)); +#533866 = SURFACE_STYLE_FILL_AREA(#533867); +#533867 = FILL_AREA_STYLE('',(#533868)); +#533868 = FILL_AREA_STYLE_COLOUR('',#533245); +#533869 = STYLED_ITEM('color',(#533870),#340646); +#533870 = PRESENTATION_STYLE_ASSIGNMENT((#533871)); +#533871 = SURFACE_STYLE_USAGE(.BOTH.,#533872); +#533872 = SURFACE_SIDE_STYLE('',(#533873)); +#533873 = SURFACE_STYLE_FILL_AREA(#533874); +#533874 = FILL_AREA_STYLE('',(#533875)); +#533875 = FILL_AREA_STYLE_COLOUR('',#533245); +#533876 = STYLED_ITEM('color',(#533877),#340936); +#533877 = PRESENTATION_STYLE_ASSIGNMENT((#533878)); +#533878 = SURFACE_STYLE_USAGE(.BOTH.,#533879); +#533879 = SURFACE_SIDE_STYLE('',(#533880)); +#533880 = SURFACE_STYLE_FILL_AREA(#533881); +#533881 = FILL_AREA_STYLE('',(#533882)); +#533882 = FILL_AREA_STYLE_COLOUR('',#533245); +#533883 = STYLED_ITEM('color',(#533884),#341086); +#533884 = PRESENTATION_STYLE_ASSIGNMENT((#533885)); +#533885 = SURFACE_STYLE_USAGE(.BOTH.,#533886); +#533886 = SURFACE_SIDE_STYLE('',(#533887)); +#533887 = SURFACE_STYLE_FILL_AREA(#533888); +#533888 = FILL_AREA_STYLE('',(#533889)); +#533889 = FILL_AREA_STYLE_COLOUR('',#533245); +#533890 = STYLED_ITEM('color',(#533891),#341376); +#533891 = PRESENTATION_STYLE_ASSIGNMENT((#533892)); +#533892 = SURFACE_STYLE_USAGE(.BOTH.,#533893); +#533893 = SURFACE_SIDE_STYLE('',(#533894)); +#533894 = SURFACE_STYLE_FILL_AREA(#533895); +#533895 = FILL_AREA_STYLE('',(#533896)); +#533896 = FILL_AREA_STYLE_COLOUR('',#533245); +#533897 = STYLED_ITEM('color',(#533898),#341526); +#533898 = PRESENTATION_STYLE_ASSIGNMENT((#533899)); +#533899 = SURFACE_STYLE_USAGE(.BOTH.,#533900); +#533900 = SURFACE_SIDE_STYLE('',(#533901)); +#533901 = SURFACE_STYLE_FILL_AREA(#533902); +#533902 = FILL_AREA_STYLE('',(#533903)); +#533903 = FILL_AREA_STYLE_COLOUR('',#533245); +#533904 = STYLED_ITEM('color',(#533905),#341676); +#533905 = PRESENTATION_STYLE_ASSIGNMENT((#533906)); +#533906 = SURFACE_STYLE_USAGE(.BOTH.,#533907); +#533907 = SURFACE_SIDE_STYLE('',(#533908)); +#533908 = SURFACE_STYLE_FILL_AREA(#533909); +#533909 = FILL_AREA_STYLE('',(#533910)); +#533910 = FILL_AREA_STYLE_COLOUR('',#533245); +#533911 = STYLED_ITEM('color',(#533912),#341966); +#533912 = PRESENTATION_STYLE_ASSIGNMENT((#533913)); +#533913 = SURFACE_STYLE_USAGE(.BOTH.,#533914); +#533914 = SURFACE_SIDE_STYLE('',(#533915)); +#533915 = SURFACE_STYLE_FILL_AREA(#533916); +#533916 = FILL_AREA_STYLE('',(#533917)); +#533917 = FILL_AREA_STYLE_COLOUR('',#533245); +#533918 = STYLED_ITEM('color',(#533919),#342256); +#533919 = PRESENTATION_STYLE_ASSIGNMENT((#533920)); +#533920 = SURFACE_STYLE_USAGE(.BOTH.,#533921); +#533921 = SURFACE_SIDE_STYLE('',(#533922)); +#533922 = SURFACE_STYLE_FILL_AREA(#533923); +#533923 = FILL_AREA_STYLE('',(#533924)); +#533924 = FILL_AREA_STYLE_COLOUR('',#533245); +#533925 = STYLED_ITEM('color',(#533926),#342406); +#533926 = PRESENTATION_STYLE_ASSIGNMENT((#533927)); +#533927 = SURFACE_STYLE_USAGE(.BOTH.,#533928); +#533928 = SURFACE_SIDE_STYLE('',(#533929)); +#533929 = SURFACE_STYLE_FILL_AREA(#533930); +#533930 = FILL_AREA_STYLE('',(#533931)); +#533931 = FILL_AREA_STYLE_COLOUR('',#533245); +#533932 = STYLED_ITEM('color',(#533933),#342696); +#533933 = PRESENTATION_STYLE_ASSIGNMENT((#533934)); +#533934 = SURFACE_STYLE_USAGE(.BOTH.,#533935); +#533935 = SURFACE_SIDE_STYLE('',(#533936)); +#533936 = SURFACE_STYLE_FILL_AREA(#533937); +#533937 = FILL_AREA_STYLE('',(#533938)); +#533938 = FILL_AREA_STYLE_COLOUR('',#533245); +#533939 = STYLED_ITEM('color',(#533940),#342986); +#533940 = PRESENTATION_STYLE_ASSIGNMENT((#533941)); +#533941 = SURFACE_STYLE_USAGE(.BOTH.,#533942); +#533942 = SURFACE_SIDE_STYLE('',(#533943)); +#533943 = SURFACE_STYLE_FILL_AREA(#533944); +#533944 = FILL_AREA_STYLE('',(#533945)); +#533945 = FILL_AREA_STYLE_COLOUR('',#533245); +#533946 = STYLED_ITEM('color',(#533947),#343276); +#533947 = PRESENTATION_STYLE_ASSIGNMENT((#533948)); +#533948 = SURFACE_STYLE_USAGE(.BOTH.,#533949); +#533949 = SURFACE_SIDE_STYLE('',(#533950)); +#533950 = SURFACE_STYLE_FILL_AREA(#533951); +#533951 = FILL_AREA_STYLE('',(#533952)); +#533952 = FILL_AREA_STYLE_COLOUR('',#533245); +#533953 = STYLED_ITEM('color',(#533954),#343566); +#533954 = PRESENTATION_STYLE_ASSIGNMENT((#533955)); +#533955 = SURFACE_STYLE_USAGE(.BOTH.,#533956); +#533956 = SURFACE_SIDE_STYLE('',(#533957)); +#533957 = SURFACE_STYLE_FILL_AREA(#533958); +#533958 = FILL_AREA_STYLE('',(#533959)); +#533959 = FILL_AREA_STYLE_COLOUR('',#533245); +#533960 = STYLED_ITEM('color',(#533961),#343856); +#533961 = PRESENTATION_STYLE_ASSIGNMENT((#533962)); +#533962 = SURFACE_STYLE_USAGE(.BOTH.,#533963); +#533963 = SURFACE_SIDE_STYLE('',(#533964)); +#533964 = SURFACE_STYLE_FILL_AREA(#533965); +#533965 = FILL_AREA_STYLE('',(#533966)); +#533966 = FILL_AREA_STYLE_COLOUR('',#533245); +#533967 = STYLED_ITEM('color',(#533968),#344146); +#533968 = PRESENTATION_STYLE_ASSIGNMENT((#533969)); +#533969 = SURFACE_STYLE_USAGE(.BOTH.,#533970); +#533970 = SURFACE_SIDE_STYLE('',(#533971)); +#533971 = SURFACE_STYLE_FILL_AREA(#533972); +#533972 = FILL_AREA_STYLE('',(#533973)); +#533973 = FILL_AREA_STYLE_COLOUR('',#533245); +#533974 = STYLED_ITEM('color',(#533975),#344296); +#533975 = PRESENTATION_STYLE_ASSIGNMENT((#533976)); +#533976 = SURFACE_STYLE_USAGE(.BOTH.,#533977); +#533977 = SURFACE_SIDE_STYLE('',(#533978)); +#533978 = SURFACE_STYLE_FILL_AREA(#533979); +#533979 = FILL_AREA_STYLE('',(#533980)); +#533980 = FILL_AREA_STYLE_COLOUR('',#533245); +#533981 = STYLED_ITEM('color',(#533982),#344446); +#533982 = PRESENTATION_STYLE_ASSIGNMENT((#533983)); +#533983 = SURFACE_STYLE_USAGE(.BOTH.,#533984); +#533984 = SURFACE_SIDE_STYLE('',(#533985)); +#533985 = SURFACE_STYLE_FILL_AREA(#533986); +#533986 = FILL_AREA_STYLE('',(#533987)); +#533987 = FILL_AREA_STYLE_COLOUR('',#533245); +#533988 = STYLED_ITEM('color',(#533989),#344736); +#533989 = PRESENTATION_STYLE_ASSIGNMENT((#533990)); +#533990 = SURFACE_STYLE_USAGE(.BOTH.,#533991); +#533991 = SURFACE_SIDE_STYLE('',(#533992)); +#533992 = SURFACE_STYLE_FILL_AREA(#533993); +#533993 = FILL_AREA_STYLE('',(#533994)); +#533994 = FILL_AREA_STYLE_COLOUR('',#533245); +#533995 = STYLED_ITEM('color',(#533996),#345026); +#533996 = PRESENTATION_STYLE_ASSIGNMENT((#533997)); +#533997 = SURFACE_STYLE_USAGE(.BOTH.,#533998); +#533998 = SURFACE_SIDE_STYLE('',(#533999)); +#533999 = SURFACE_STYLE_FILL_AREA(#534000); +#534000 = FILL_AREA_STYLE('',(#534001)); +#534001 = FILL_AREA_STYLE_COLOUR('',#533245); +#534002 = STYLED_ITEM('color',(#534003),#345176); +#534003 = PRESENTATION_STYLE_ASSIGNMENT((#534004)); +#534004 = SURFACE_STYLE_USAGE(.BOTH.,#534005); +#534005 = SURFACE_SIDE_STYLE('',(#534006)); +#534006 = SURFACE_STYLE_FILL_AREA(#534007); +#534007 = FILL_AREA_STYLE('',(#534008)); +#534008 = FILL_AREA_STYLE_COLOUR('',#533245); +#534009 = STYLED_ITEM('color',(#534010),#345466); +#534010 = PRESENTATION_STYLE_ASSIGNMENT((#534011)); +#534011 = SURFACE_STYLE_USAGE(.BOTH.,#534012); +#534012 = SURFACE_SIDE_STYLE('',(#534013)); +#534013 = SURFACE_STYLE_FILL_AREA(#534014); +#534014 = FILL_AREA_STYLE('',(#534015)); +#534015 = FILL_AREA_STYLE_COLOUR('',#533245); +#534016 = STYLED_ITEM('color',(#534017),#345756); +#534017 = PRESENTATION_STYLE_ASSIGNMENT((#534018)); +#534018 = SURFACE_STYLE_USAGE(.BOTH.,#534019); +#534019 = SURFACE_SIDE_STYLE('',(#534020)); +#534020 = SURFACE_STYLE_FILL_AREA(#534021); +#534021 = FILL_AREA_STYLE('',(#534022)); +#534022 = FILL_AREA_STYLE_COLOUR('',#533245); +#534023 = STYLED_ITEM('color',(#534024),#345906); +#534024 = PRESENTATION_STYLE_ASSIGNMENT((#534025)); +#534025 = SURFACE_STYLE_USAGE(.BOTH.,#534026); +#534026 = SURFACE_SIDE_STYLE('',(#534027)); +#534027 = SURFACE_STYLE_FILL_AREA(#534028); +#534028 = FILL_AREA_STYLE('',(#534029)); +#534029 = FILL_AREA_STYLE_COLOUR('',#533245); +#534030 = STYLED_ITEM('color',(#534031),#346196); +#534031 = PRESENTATION_STYLE_ASSIGNMENT((#534032)); +#534032 = SURFACE_STYLE_USAGE(.BOTH.,#534033); +#534033 = SURFACE_SIDE_STYLE('',(#534034)); +#534034 = SURFACE_STYLE_FILL_AREA(#534035); +#534035 = FILL_AREA_STYLE('',(#534036)); +#534036 = FILL_AREA_STYLE_COLOUR('',#533245); +#534037 = STYLED_ITEM('color',(#534038),#346346); +#534038 = PRESENTATION_STYLE_ASSIGNMENT((#534039)); +#534039 = SURFACE_STYLE_USAGE(.BOTH.,#534040); +#534040 = SURFACE_SIDE_STYLE('',(#534041)); +#534041 = SURFACE_STYLE_FILL_AREA(#534042); +#534042 = FILL_AREA_STYLE('',(#534043)); +#534043 = FILL_AREA_STYLE_COLOUR('',#533245); +#534044 = STYLED_ITEM('color',(#534045),#346438); +#534045 = PRESENTATION_STYLE_ASSIGNMENT((#534046)); +#534046 = SURFACE_STYLE_USAGE(.BOTH.,#534047); +#534047 = SURFACE_SIDE_STYLE('',(#534048)); +#534048 = SURFACE_STYLE_FILL_AREA(#534049); +#534049 = FILL_AREA_STYLE('',(#534050)); +#534050 = FILL_AREA_STYLE_COLOUR('',#533245); +#534051 = STYLED_ITEM('color',(#534052),#346530); +#534052 = PRESENTATION_STYLE_ASSIGNMENT((#534053)); +#534053 = SURFACE_STYLE_USAGE(.BOTH.,#534054); +#534054 = SURFACE_SIDE_STYLE('',(#534055)); +#534055 = SURFACE_STYLE_FILL_AREA(#534056); +#534056 = FILL_AREA_STYLE('',(#534057)); +#534057 = FILL_AREA_STYLE_COLOUR('',#533245); +#534058 = STYLED_ITEM('color',(#534059),#346622); +#534059 = PRESENTATION_STYLE_ASSIGNMENT((#534060)); +#534060 = SURFACE_STYLE_USAGE(.BOTH.,#534061); +#534061 = SURFACE_SIDE_STYLE('',(#534062)); +#534062 = SURFACE_STYLE_FILL_AREA(#534063); +#534063 = FILL_AREA_STYLE('',(#534064)); +#534064 = FILL_AREA_STYLE_COLOUR('',#533245); +#534065 = STYLED_ITEM('color',(#534066),#346772); +#534066 = PRESENTATION_STYLE_ASSIGNMENT((#534067)); +#534067 = SURFACE_STYLE_USAGE(.BOTH.,#534068); +#534068 = SURFACE_SIDE_STYLE('',(#534069)); +#534069 = SURFACE_STYLE_FILL_AREA(#534070); +#534070 = FILL_AREA_STYLE('',(#534071)); +#534071 = FILL_AREA_STYLE_COLOUR('',#533245); +#534072 = STYLED_ITEM('color',(#534073),#347062); +#534073 = PRESENTATION_STYLE_ASSIGNMENT((#534074)); +#534074 = SURFACE_STYLE_USAGE(.BOTH.,#534075); +#534075 = SURFACE_SIDE_STYLE('',(#534076)); +#534076 = SURFACE_STYLE_FILL_AREA(#534077); +#534077 = FILL_AREA_STYLE('',(#534078)); +#534078 = FILL_AREA_STYLE_COLOUR('',#533245); +#534079 = STYLED_ITEM('color',(#534080),#347352); +#534080 = PRESENTATION_STYLE_ASSIGNMENT((#534081)); +#534081 = SURFACE_STYLE_USAGE(.BOTH.,#534082); +#534082 = SURFACE_SIDE_STYLE('',(#534083)); +#534083 = SURFACE_STYLE_FILL_AREA(#534084); +#534084 = FILL_AREA_STYLE('',(#534085)); +#534085 = FILL_AREA_STYLE_COLOUR('',#533245); +#534086 = STYLED_ITEM('color',(#534087),#347642); +#534087 = PRESENTATION_STYLE_ASSIGNMENT((#534088)); +#534088 = SURFACE_STYLE_USAGE(.BOTH.,#534089); +#534089 = SURFACE_SIDE_STYLE('',(#534090)); +#534090 = SURFACE_STYLE_FILL_AREA(#534091); +#534091 = FILL_AREA_STYLE('',(#534092)); +#534092 = FILL_AREA_STYLE_COLOUR('',#533245); +#534093 = STYLED_ITEM('color',(#534094),#347932); +#534094 = PRESENTATION_STYLE_ASSIGNMENT((#534095)); +#534095 = SURFACE_STYLE_USAGE(.BOTH.,#534096); +#534096 = SURFACE_SIDE_STYLE('',(#534097)); +#534097 = SURFACE_STYLE_FILL_AREA(#534098); +#534098 = FILL_AREA_STYLE('',(#534099)); +#534099 = FILL_AREA_STYLE_COLOUR('',#533245); +#534100 = STYLED_ITEM('color',(#534101),#348082); +#534101 = PRESENTATION_STYLE_ASSIGNMENT((#534102)); +#534102 = SURFACE_STYLE_USAGE(.BOTH.,#534103); +#534103 = SURFACE_SIDE_STYLE('',(#534104)); +#534104 = SURFACE_STYLE_FILL_AREA(#534105); +#534105 = FILL_AREA_STYLE('',(#534106)); +#534106 = FILL_AREA_STYLE_COLOUR('',#533245); +#534107 = STYLED_ITEM('color',(#534108),#348232); +#534108 = PRESENTATION_STYLE_ASSIGNMENT((#534109)); +#534109 = SURFACE_STYLE_USAGE(.BOTH.,#534110); +#534110 = SURFACE_SIDE_STYLE('',(#534111)); +#534111 = SURFACE_STYLE_FILL_AREA(#534112); +#534112 = FILL_AREA_STYLE('',(#534113)); +#534113 = FILL_AREA_STYLE_COLOUR('',#533245); +#534114 = STYLED_ITEM('color',(#534115),#348522); +#534115 = PRESENTATION_STYLE_ASSIGNMENT((#534116)); +#534116 = SURFACE_STYLE_USAGE(.BOTH.,#534117); +#534117 = SURFACE_SIDE_STYLE('',(#534118)); +#534118 = SURFACE_STYLE_FILL_AREA(#534119); +#534119 = FILL_AREA_STYLE('',(#534120)); +#534120 = FILL_AREA_STYLE_COLOUR('',#533245); +#534121 = STYLED_ITEM('color',(#534122),#348812); +#534122 = PRESENTATION_STYLE_ASSIGNMENT((#534123)); +#534123 = SURFACE_STYLE_USAGE(.BOTH.,#534124); +#534124 = SURFACE_SIDE_STYLE('',(#534125)); +#534125 = SURFACE_STYLE_FILL_AREA(#534126); +#534126 = FILL_AREA_STYLE('',(#534127)); +#534127 = FILL_AREA_STYLE_COLOUR('',#533245); +#534128 = STYLED_ITEM('color',(#534129),#349102); +#534129 = PRESENTATION_STYLE_ASSIGNMENT((#534130)); +#534130 = SURFACE_STYLE_USAGE(.BOTH.,#534131); +#534131 = SURFACE_SIDE_STYLE('',(#534132)); +#534132 = SURFACE_STYLE_FILL_AREA(#534133); +#534133 = FILL_AREA_STYLE('',(#534134)); +#534134 = FILL_AREA_STYLE_COLOUR('',#533245); +#534135 = STYLED_ITEM('color',(#534136),#349392); +#534136 = PRESENTATION_STYLE_ASSIGNMENT((#534137)); +#534137 = SURFACE_STYLE_USAGE(.BOTH.,#534138); +#534138 = SURFACE_SIDE_STYLE('',(#534139)); +#534139 = SURFACE_STYLE_FILL_AREA(#534140); +#534140 = FILL_AREA_STYLE('',(#534141)); +#534141 = FILL_AREA_STYLE_COLOUR('',#533245); +#534142 = STYLED_ITEM('color',(#534143),#349682); +#534143 = PRESENTATION_STYLE_ASSIGNMENT((#534144)); +#534144 = SURFACE_STYLE_USAGE(.BOTH.,#534145); +#534145 = SURFACE_SIDE_STYLE('',(#534146)); +#534146 = SURFACE_STYLE_FILL_AREA(#534147); +#534147 = FILL_AREA_STYLE('',(#534148)); +#534148 = FILL_AREA_STYLE_COLOUR('',#533245); +#534149 = STYLED_ITEM('color',(#534150),#349832); +#534150 = PRESENTATION_STYLE_ASSIGNMENT((#534151)); +#534151 = SURFACE_STYLE_USAGE(.BOTH.,#534152); +#534152 = SURFACE_SIDE_STYLE('',(#534153)); +#534153 = SURFACE_STYLE_FILL_AREA(#534154); +#534154 = FILL_AREA_STYLE('',(#534155)); +#534155 = FILL_AREA_STYLE_COLOUR('',#533245); +#534156 = STYLED_ITEM('color',(#534157),#350122); +#534157 = PRESENTATION_STYLE_ASSIGNMENT((#534158)); +#534158 = SURFACE_STYLE_USAGE(.BOTH.,#534159); +#534159 = SURFACE_SIDE_STYLE('',(#534160)); +#534160 = SURFACE_STYLE_FILL_AREA(#534161); +#534161 = FILL_AREA_STYLE('',(#534162)); +#534162 = FILL_AREA_STYLE_COLOUR('',#533245); +#534163 = STYLED_ITEM('color',(#534164),#350272); +#534164 = PRESENTATION_STYLE_ASSIGNMENT((#534165)); +#534165 = SURFACE_STYLE_USAGE(.BOTH.,#534166); +#534166 = SURFACE_SIDE_STYLE('',(#534167)); +#534167 = SURFACE_STYLE_FILL_AREA(#534168); +#534168 = FILL_AREA_STYLE('',(#534169)); +#534169 = FILL_AREA_STYLE_COLOUR('',#533245); +#534170 = STYLED_ITEM('color',(#534171),#350562); +#534171 = PRESENTATION_STYLE_ASSIGNMENT((#534172)); +#534172 = SURFACE_STYLE_USAGE(.BOTH.,#534173); +#534173 = SURFACE_SIDE_STYLE('',(#534174)); +#534174 = SURFACE_STYLE_FILL_AREA(#534175); +#534175 = FILL_AREA_STYLE('',(#534176)); +#534176 = FILL_AREA_STYLE_COLOUR('',#533245); +#534177 = STYLED_ITEM('color',(#534178),#350654); +#534178 = PRESENTATION_STYLE_ASSIGNMENT((#534179)); +#534179 = SURFACE_STYLE_USAGE(.BOTH.,#534180); +#534180 = SURFACE_SIDE_STYLE('',(#534181)); +#534181 = SURFACE_STYLE_FILL_AREA(#534182); +#534182 = FILL_AREA_STYLE('',(#534183)); +#534183 = FILL_AREA_STYLE_COLOUR('',#533245); +#534184 = STYLED_ITEM('color',(#534185),#350746); +#534185 = PRESENTATION_STYLE_ASSIGNMENT((#534186)); +#534186 = SURFACE_STYLE_USAGE(.BOTH.,#534187); +#534187 = SURFACE_SIDE_STYLE('',(#534188)); +#534188 = SURFACE_STYLE_FILL_AREA(#534189); +#534189 = FILL_AREA_STYLE('',(#534190)); +#534190 = FILL_AREA_STYLE_COLOUR('',#533245); +#534191 = STYLED_ITEM('color',(#534192),#350838); +#534192 = PRESENTATION_STYLE_ASSIGNMENT((#534193)); +#534193 = SURFACE_STYLE_USAGE(.BOTH.,#534194); +#534194 = SURFACE_SIDE_STYLE('',(#534195)); +#534195 = SURFACE_STYLE_FILL_AREA(#534196); +#534196 = FILL_AREA_STYLE('',(#534197)); +#534197 = FILL_AREA_STYLE_COLOUR('',#533245); +#534198 = STYLED_ITEM('color',(#534199),#350988); +#534199 = PRESENTATION_STYLE_ASSIGNMENT((#534200)); +#534200 = SURFACE_STYLE_USAGE(.BOTH.,#534201); +#534201 = SURFACE_SIDE_STYLE('',(#534202)); +#534202 = SURFACE_STYLE_FILL_AREA(#534203); +#534203 = FILL_AREA_STYLE('',(#534204)); +#534204 = FILL_AREA_STYLE_COLOUR('',#533245); +#534205 = STYLED_ITEM('color',(#534206),#351080); +#534206 = PRESENTATION_STYLE_ASSIGNMENT((#534207)); +#534207 = SURFACE_STYLE_USAGE(.BOTH.,#534208); +#534208 = SURFACE_SIDE_STYLE('',(#534209)); +#534209 = SURFACE_STYLE_FILL_AREA(#534210); +#534210 = FILL_AREA_STYLE('',(#534211)); +#534211 = FILL_AREA_STYLE_COLOUR('',#533245); +#534212 = STYLED_ITEM('color',(#534213),#351172); +#534213 = PRESENTATION_STYLE_ASSIGNMENT((#534214)); +#534214 = SURFACE_STYLE_USAGE(.BOTH.,#534215); +#534215 = SURFACE_SIDE_STYLE('',(#534216)); +#534216 = SURFACE_STYLE_FILL_AREA(#534217); +#534217 = FILL_AREA_STYLE('',(#534218)); +#534218 = FILL_AREA_STYLE_COLOUR('',#533245); +#534219 = STYLED_ITEM('color',(#534220),#351264); +#534220 = PRESENTATION_STYLE_ASSIGNMENT((#534221)); +#534221 = SURFACE_STYLE_USAGE(.BOTH.,#534222); +#534222 = SURFACE_SIDE_STYLE('',(#534223)); +#534223 = SURFACE_STYLE_FILL_AREA(#534224); +#534224 = FILL_AREA_STYLE('',(#534225)); +#534225 = FILL_AREA_STYLE_COLOUR('',#533245); +#534226 = STYLED_ITEM('color',(#534227),#351414); +#534227 = PRESENTATION_STYLE_ASSIGNMENT((#534228)); +#534228 = SURFACE_STYLE_USAGE(.BOTH.,#534229); +#534229 = SURFACE_SIDE_STYLE('',(#534230)); +#534230 = SURFACE_STYLE_FILL_AREA(#534231); +#534231 = FILL_AREA_STYLE('',(#534232)); +#534232 = FILL_AREA_STYLE_COLOUR('',#533245); +#534233 = STYLED_ITEM('color',(#534234),#351506); +#534234 = PRESENTATION_STYLE_ASSIGNMENT((#534235)); +#534235 = SURFACE_STYLE_USAGE(.BOTH.,#534236); +#534236 = SURFACE_SIDE_STYLE('',(#534237)); +#534237 = SURFACE_STYLE_FILL_AREA(#534238); +#534238 = FILL_AREA_STYLE('',(#534239)); +#534239 = FILL_AREA_STYLE_COLOUR('',#533245); +#534240 = STYLED_ITEM('color',(#534241),#351598); +#534241 = PRESENTATION_STYLE_ASSIGNMENT((#534242)); +#534242 = SURFACE_STYLE_USAGE(.BOTH.,#534243); +#534243 = SURFACE_SIDE_STYLE('',(#534244)); +#534244 = SURFACE_STYLE_FILL_AREA(#534245); +#534245 = FILL_AREA_STYLE('',(#534246)); +#534246 = FILL_AREA_STYLE_COLOUR('',#533245); +#534247 = STYLED_ITEM('color',(#534248),#351690); +#534248 = PRESENTATION_STYLE_ASSIGNMENT((#534249)); +#534249 = SURFACE_STYLE_USAGE(.BOTH.,#534250); +#534250 = SURFACE_SIDE_STYLE('',(#534251)); +#534251 = SURFACE_STYLE_FILL_AREA(#534252); +#534252 = FILL_AREA_STYLE('',(#534253)); +#534253 = FILL_AREA_STYLE_COLOUR('',#533245); +#534254 = STYLED_ITEM('color',(#534255),#351840); +#534255 = PRESENTATION_STYLE_ASSIGNMENT((#534256)); +#534256 = SURFACE_STYLE_USAGE(.BOTH.,#534257); +#534257 = SURFACE_SIDE_STYLE('',(#534258)); +#534258 = SURFACE_STYLE_FILL_AREA(#534259); +#534259 = FILL_AREA_STYLE('',(#534260)); +#534260 = FILL_AREA_STYLE_COLOUR('',#533245); +#534261 = STYLED_ITEM('color',(#534262),#351990); +#534262 = PRESENTATION_STYLE_ASSIGNMENT((#534263)); +#534263 = SURFACE_STYLE_USAGE(.BOTH.,#534264); +#534264 = SURFACE_SIDE_STYLE('',(#534265)); +#534265 = SURFACE_STYLE_FILL_AREA(#534266); +#534266 = FILL_AREA_STYLE('',(#534267)); +#534267 = FILL_AREA_STYLE_COLOUR('',#533245); +#534268 = STYLED_ITEM('color',(#534269),#352280); +#534269 = PRESENTATION_STYLE_ASSIGNMENT((#534270)); +#534270 = SURFACE_STYLE_USAGE(.BOTH.,#534271); +#534271 = SURFACE_SIDE_STYLE('',(#534272)); +#534272 = SURFACE_STYLE_FILL_AREA(#534273); +#534273 = FILL_AREA_STYLE('',(#534274)); +#534274 = FILL_AREA_STYLE_COLOUR('',#533245); +#534275 = STYLED_ITEM('color',(#534276),#352570); +#534276 = PRESENTATION_STYLE_ASSIGNMENT((#534277)); +#534277 = SURFACE_STYLE_USAGE(.BOTH.,#534278); +#534278 = SURFACE_SIDE_STYLE('',(#534279)); +#534279 = SURFACE_STYLE_FILL_AREA(#534280); +#534280 = FILL_AREA_STYLE('',(#534281)); +#534281 = FILL_AREA_STYLE_COLOUR('',#533245); +#534282 = STYLED_ITEM('color',(#534283),#352720); +#534283 = PRESENTATION_STYLE_ASSIGNMENT((#534284)); +#534284 = SURFACE_STYLE_USAGE(.BOTH.,#534285); +#534285 = SURFACE_SIDE_STYLE('',(#534286)); +#534286 = SURFACE_STYLE_FILL_AREA(#534287); +#534287 = FILL_AREA_STYLE('',(#534288)); +#534288 = FILL_AREA_STYLE_COLOUR('',#533245); +#534289 = STYLED_ITEM('color',(#534290),#353010); +#534290 = PRESENTATION_STYLE_ASSIGNMENT((#534291)); +#534291 = SURFACE_STYLE_USAGE(.BOTH.,#534292); +#534292 = SURFACE_SIDE_STYLE('',(#534293)); +#534293 = SURFACE_STYLE_FILL_AREA(#534294); +#534294 = FILL_AREA_STYLE('',(#534295)); +#534295 = FILL_AREA_STYLE_COLOUR('',#533245); +#534296 = STYLED_ITEM('color',(#534297),#353300); +#534297 = PRESENTATION_STYLE_ASSIGNMENT((#534298)); +#534298 = SURFACE_STYLE_USAGE(.BOTH.,#534299); +#534299 = SURFACE_SIDE_STYLE('',(#534300)); +#534300 = SURFACE_STYLE_FILL_AREA(#534301); +#534301 = FILL_AREA_STYLE('',(#534302)); +#534302 = FILL_AREA_STYLE_COLOUR('',#533245); +#534303 = STYLED_ITEM('color',(#534304),#353450); +#534304 = PRESENTATION_STYLE_ASSIGNMENT((#534305)); +#534305 = SURFACE_STYLE_USAGE(.BOTH.,#534306); +#534306 = SURFACE_SIDE_STYLE('',(#534307)); +#534307 = SURFACE_STYLE_FILL_AREA(#534308); +#534308 = FILL_AREA_STYLE('',(#534309)); +#534309 = FILL_AREA_STYLE_COLOUR('',#533245); +#534310 = STYLED_ITEM('color',(#534311),#353542); +#534311 = PRESENTATION_STYLE_ASSIGNMENT((#534312)); +#534312 = SURFACE_STYLE_USAGE(.BOTH.,#534313); +#534313 = SURFACE_SIDE_STYLE('',(#534314)); +#534314 = SURFACE_STYLE_FILL_AREA(#534315); +#534315 = FILL_AREA_STYLE('',(#534316)); +#534316 = FILL_AREA_STYLE_COLOUR('',#533245); +#534317 = STYLED_ITEM('color',(#534318),#353634); +#534318 = PRESENTATION_STYLE_ASSIGNMENT((#534319)); +#534319 = SURFACE_STYLE_USAGE(.BOTH.,#534320); +#534320 = SURFACE_SIDE_STYLE('',(#534321)); +#534321 = SURFACE_STYLE_FILL_AREA(#534322); +#534322 = FILL_AREA_STYLE('',(#534323)); +#534323 = FILL_AREA_STYLE_COLOUR('',#533245); +#534324 = STYLED_ITEM('color',(#534325),#353726); +#534325 = PRESENTATION_STYLE_ASSIGNMENT((#534326)); +#534326 = SURFACE_STYLE_USAGE(.BOTH.,#534327); +#534327 = SURFACE_SIDE_STYLE('',(#534328)); +#534328 = SURFACE_STYLE_FILL_AREA(#534329); +#534329 = FILL_AREA_STYLE('',(#534330)); +#534330 = FILL_AREA_STYLE_COLOUR('',#533245); +#534331 = STYLED_ITEM('color',(#534332),#353876); +#534332 = PRESENTATION_STYLE_ASSIGNMENT((#534333)); +#534333 = SURFACE_STYLE_USAGE(.BOTH.,#534334); +#534334 = SURFACE_SIDE_STYLE('',(#534335)); +#534335 = SURFACE_STYLE_FILL_AREA(#534336); +#534336 = FILL_AREA_STYLE('',(#534337)); +#534337 = FILL_AREA_STYLE_COLOUR('',#533245); +#534338 = STYLED_ITEM('color',(#534339),#353968); +#534339 = PRESENTATION_STYLE_ASSIGNMENT((#534340)); +#534340 = SURFACE_STYLE_USAGE(.BOTH.,#534341); +#534341 = SURFACE_SIDE_STYLE('',(#534342)); +#534342 = SURFACE_STYLE_FILL_AREA(#534343); +#534343 = FILL_AREA_STYLE('',(#534344)); +#534344 = FILL_AREA_STYLE_COLOUR('',#533245); +#534345 = STYLED_ITEM('color',(#534346),#354060); +#534346 = PRESENTATION_STYLE_ASSIGNMENT((#534347)); +#534347 = SURFACE_STYLE_USAGE(.BOTH.,#534348); +#534348 = SURFACE_SIDE_STYLE('',(#534349)); +#534349 = SURFACE_STYLE_FILL_AREA(#534350); +#534350 = FILL_AREA_STYLE('',(#534351)); +#534351 = FILL_AREA_STYLE_COLOUR('',#533245); +#534352 = STYLED_ITEM('color',(#534353),#354152); +#534353 = PRESENTATION_STYLE_ASSIGNMENT((#534354)); +#534354 = SURFACE_STYLE_USAGE(.BOTH.,#534355); +#534355 = SURFACE_SIDE_STYLE('',(#534356)); +#534356 = SURFACE_STYLE_FILL_AREA(#534357); +#534357 = FILL_AREA_STYLE('',(#534358)); +#534358 = FILL_AREA_STYLE_COLOUR('',#533245); +#534359 = STYLED_ITEM('color',(#534360),#354442); +#534360 = PRESENTATION_STYLE_ASSIGNMENT((#534361)); +#534361 = SURFACE_STYLE_USAGE(.BOTH.,#534362); +#534362 = SURFACE_SIDE_STYLE('',(#534363)); +#534363 = SURFACE_STYLE_FILL_AREA(#534364); +#534364 = FILL_AREA_STYLE('',(#534365)); +#534365 = FILL_AREA_STYLE_COLOUR('',#533245); +#534366 = STYLED_ITEM('color',(#534367),#354732); +#534367 = PRESENTATION_STYLE_ASSIGNMENT((#534368)); +#534368 = SURFACE_STYLE_USAGE(.BOTH.,#534369); +#534369 = SURFACE_SIDE_STYLE('',(#534370)); +#534370 = SURFACE_STYLE_FILL_AREA(#534371); +#534371 = FILL_AREA_STYLE('',(#534372)); +#534372 = FILL_AREA_STYLE_COLOUR('',#533245); +#534373 = STYLED_ITEM('color',(#534374),#355022); +#534374 = PRESENTATION_STYLE_ASSIGNMENT((#534375)); +#534375 = SURFACE_STYLE_USAGE(.BOTH.,#534376); +#534376 = SURFACE_SIDE_STYLE('',(#534377)); +#534377 = SURFACE_STYLE_FILL_AREA(#534378); +#534378 = FILL_AREA_STYLE('',(#534379)); +#534379 = FILL_AREA_STYLE_COLOUR('',#533245); +#534380 = STYLED_ITEM('color',(#534381),#355312); +#534381 = PRESENTATION_STYLE_ASSIGNMENT((#534382)); +#534382 = SURFACE_STYLE_USAGE(.BOTH.,#534383); +#534383 = SURFACE_SIDE_STYLE('',(#534384)); +#534384 = SURFACE_STYLE_FILL_AREA(#534385); +#534385 = FILL_AREA_STYLE('',(#534386)); +#534386 = FILL_AREA_STYLE_COLOUR('',#533245); +#534387 = STYLED_ITEM('color',(#534388),#355462); +#534388 = PRESENTATION_STYLE_ASSIGNMENT((#534389)); +#534389 = SURFACE_STYLE_USAGE(.BOTH.,#534390); +#534390 = SURFACE_SIDE_STYLE('',(#534391)); +#534391 = SURFACE_STYLE_FILL_AREA(#534392); +#534392 = FILL_AREA_STYLE('',(#534393)); +#534393 = FILL_AREA_STYLE_COLOUR('',#533245); +#534394 = STYLED_ITEM('color',(#534395),#355752); +#534395 = PRESENTATION_STYLE_ASSIGNMENT((#534396)); +#534396 = SURFACE_STYLE_USAGE(.BOTH.,#534397); +#534397 = SURFACE_SIDE_STYLE('',(#534398)); +#534398 = SURFACE_STYLE_FILL_AREA(#534399); +#534399 = FILL_AREA_STYLE('',(#534400)); +#534400 = FILL_AREA_STYLE_COLOUR('',#533245); +#534401 = STYLED_ITEM('color',(#534402),#356042); +#534402 = PRESENTATION_STYLE_ASSIGNMENT((#534403)); +#534403 = SURFACE_STYLE_USAGE(.BOTH.,#534404); +#534404 = SURFACE_SIDE_STYLE('',(#534405)); +#534405 = SURFACE_STYLE_FILL_AREA(#534406); +#534406 = FILL_AREA_STYLE('',(#534407)); +#534407 = FILL_AREA_STYLE_COLOUR('',#533245); +#534408 = STYLED_ITEM('color',(#534409),#356332); +#534409 = PRESENTATION_STYLE_ASSIGNMENT((#534410)); +#534410 = SURFACE_STYLE_USAGE(.BOTH.,#534411); +#534411 = SURFACE_SIDE_STYLE('',(#534412)); +#534412 = SURFACE_STYLE_FILL_AREA(#534413); +#534413 = FILL_AREA_STYLE('',(#534414)); +#534414 = FILL_AREA_STYLE_COLOUR('',#533245); +#534415 = STYLED_ITEM('color',(#534416),#356482); +#534416 = PRESENTATION_STYLE_ASSIGNMENT((#534417)); +#534417 = SURFACE_STYLE_USAGE(.BOTH.,#534418); +#534418 = SURFACE_SIDE_STYLE('',(#534419)); +#534419 = SURFACE_STYLE_FILL_AREA(#534420); +#534420 = FILL_AREA_STYLE('',(#534421)); +#534421 = FILL_AREA_STYLE_COLOUR('',#533245); +#534422 = STYLED_ITEM('color',(#534423),#356772); +#534423 = PRESENTATION_STYLE_ASSIGNMENT((#534424)); +#534424 = SURFACE_STYLE_USAGE(.BOTH.,#534425); +#534425 = SURFACE_SIDE_STYLE('',(#534426)); +#534426 = SURFACE_STYLE_FILL_AREA(#534427); +#534427 = FILL_AREA_STYLE('',(#534428)); +#534428 = FILL_AREA_STYLE_COLOUR('',#533245); +#534429 = STYLED_ITEM('color',(#534430),#356922); +#534430 = PRESENTATION_STYLE_ASSIGNMENT((#534431)); +#534431 = SURFACE_STYLE_USAGE(.BOTH.,#534432); +#534432 = SURFACE_SIDE_STYLE('',(#534433)); +#534433 = SURFACE_STYLE_FILL_AREA(#534434); +#534434 = FILL_AREA_STYLE('',(#534435)); +#534435 = FILL_AREA_STYLE_COLOUR('',#533245); +#534436 = STYLED_ITEM('color',(#534437),#357212); +#534437 = PRESENTATION_STYLE_ASSIGNMENT((#534438)); +#534438 = SURFACE_STYLE_USAGE(.BOTH.,#534439); +#534439 = SURFACE_SIDE_STYLE('',(#534440)); +#534440 = SURFACE_STYLE_FILL_AREA(#534441); +#534441 = FILL_AREA_STYLE('',(#534442)); +#534442 = FILL_AREA_STYLE_COLOUR('',#533245); +#534443 = STYLED_ITEM('color',(#534444),#357502); +#534444 = PRESENTATION_STYLE_ASSIGNMENT((#534445)); +#534445 = SURFACE_STYLE_USAGE(.BOTH.,#534446); +#534446 = SURFACE_SIDE_STYLE('',(#534447)); +#534447 = SURFACE_STYLE_FILL_AREA(#534448); +#534448 = FILL_AREA_STYLE('',(#534449)); +#534449 = FILL_AREA_STYLE_COLOUR('',#533245); +#534450 = STYLED_ITEM('color',(#534451),#357594); +#534451 = PRESENTATION_STYLE_ASSIGNMENT((#534452)); +#534452 = SURFACE_STYLE_USAGE(.BOTH.,#534453); +#534453 = SURFACE_SIDE_STYLE('',(#534454)); +#534454 = SURFACE_STYLE_FILL_AREA(#534455); +#534455 = FILL_AREA_STYLE('',(#534456)); +#534456 = FILL_AREA_STYLE_COLOUR('',#533245); +#534457 = STYLED_ITEM('color',(#534458),#357686); +#534458 = PRESENTATION_STYLE_ASSIGNMENT((#534459)); +#534459 = SURFACE_STYLE_USAGE(.BOTH.,#534460); +#534460 = SURFACE_SIDE_STYLE('',(#534461)); +#534461 = SURFACE_STYLE_FILL_AREA(#534462); +#534462 = FILL_AREA_STYLE('',(#534463)); +#534463 = FILL_AREA_STYLE_COLOUR('',#533245); +#534464 = STYLED_ITEM('color',(#534465),#357778); +#534465 = PRESENTATION_STYLE_ASSIGNMENT((#534466)); +#534466 = SURFACE_STYLE_USAGE(.BOTH.,#534467); +#534467 = SURFACE_SIDE_STYLE('',(#534468)); +#534468 = SURFACE_STYLE_FILL_AREA(#534469); +#534469 = FILL_AREA_STYLE('',(#534470)); +#534470 = FILL_AREA_STYLE_COLOUR('',#533245); +#534471 = STYLED_ITEM('color',(#534472),#357928); +#534472 = PRESENTATION_STYLE_ASSIGNMENT((#534473)); +#534473 = SURFACE_STYLE_USAGE(.BOTH.,#534474); +#534474 = SURFACE_SIDE_STYLE('',(#534475)); +#534475 = SURFACE_STYLE_FILL_AREA(#534476); +#534476 = FILL_AREA_STYLE('',(#534477)); +#534477 = FILL_AREA_STYLE_COLOUR('',#533245); +#534478 = STYLED_ITEM('color',(#534479),#358020); +#534479 = PRESENTATION_STYLE_ASSIGNMENT((#534480)); +#534480 = SURFACE_STYLE_USAGE(.BOTH.,#534481); +#534481 = SURFACE_SIDE_STYLE('',(#534482)); +#534482 = SURFACE_STYLE_FILL_AREA(#534483); +#534483 = FILL_AREA_STYLE('',(#534484)); +#534484 = FILL_AREA_STYLE_COLOUR('',#533245); +#534485 = STYLED_ITEM('color',(#534486),#358112); +#534486 = PRESENTATION_STYLE_ASSIGNMENT((#534487)); +#534487 = SURFACE_STYLE_USAGE(.BOTH.,#534488); +#534488 = SURFACE_SIDE_STYLE('',(#534489)); +#534489 = SURFACE_STYLE_FILL_AREA(#534490); +#534490 = FILL_AREA_STYLE('',(#534491)); +#534491 = FILL_AREA_STYLE_COLOUR('',#533245); +#534492 = STYLED_ITEM('color',(#534493),#358204); +#534493 = PRESENTATION_STYLE_ASSIGNMENT((#534494)); +#534494 = SURFACE_STYLE_USAGE(.BOTH.,#534495); +#534495 = SURFACE_SIDE_STYLE('',(#534496)); +#534496 = SURFACE_STYLE_FILL_AREA(#534497); +#534497 = FILL_AREA_STYLE('',(#534498)); +#534498 = FILL_AREA_STYLE_COLOUR('',#533245); +#534499 = STYLED_ITEM('color',(#534500),#358354); +#534500 = PRESENTATION_STYLE_ASSIGNMENT((#534501)); +#534501 = SURFACE_STYLE_USAGE(.BOTH.,#534502); +#534502 = SURFACE_SIDE_STYLE('',(#534503)); +#534503 = SURFACE_STYLE_FILL_AREA(#534504); +#534504 = FILL_AREA_STYLE('',(#534505)); +#534505 = FILL_AREA_STYLE_COLOUR('',#533245); +#534506 = STYLED_ITEM('color',(#534507),#358644); +#534507 = PRESENTATION_STYLE_ASSIGNMENT((#534508)); +#534508 = SURFACE_STYLE_USAGE(.BOTH.,#534509); +#534509 = SURFACE_SIDE_STYLE('',(#534510)); +#534510 = SURFACE_STYLE_FILL_AREA(#534511); +#534511 = FILL_AREA_STYLE('',(#534512)); +#534512 = FILL_AREA_STYLE_COLOUR('',#533245); +#534513 = STYLED_ITEM('color',(#534514),#358934); +#534514 = PRESENTATION_STYLE_ASSIGNMENT((#534515)); +#534515 = SURFACE_STYLE_USAGE(.BOTH.,#534516); +#534516 = SURFACE_SIDE_STYLE('',(#534517)); +#534517 = SURFACE_STYLE_FILL_AREA(#534518); +#534518 = FILL_AREA_STYLE('',(#534519)); +#534519 = FILL_AREA_STYLE_COLOUR('',#533245); +#534520 = STYLED_ITEM('color',(#534521),#359224); +#534521 = PRESENTATION_STYLE_ASSIGNMENT((#534522)); +#534522 = SURFACE_STYLE_USAGE(.BOTH.,#534523); +#534523 = SURFACE_SIDE_STYLE('',(#534524)); +#534524 = SURFACE_STYLE_FILL_AREA(#534525); +#534525 = FILL_AREA_STYLE('',(#534526)); +#534526 = FILL_AREA_STYLE_COLOUR('',#533245); +#534527 = STYLED_ITEM('color',(#534528),#359514); +#534528 = PRESENTATION_STYLE_ASSIGNMENT((#534529)); +#534529 = SURFACE_STYLE_USAGE(.BOTH.,#534530); +#534530 = SURFACE_SIDE_STYLE('',(#534531)); +#534531 = SURFACE_STYLE_FILL_AREA(#534532); +#534532 = FILL_AREA_STYLE('',(#534533)); +#534533 = FILL_AREA_STYLE_COLOUR('',#533245); +#534534 = STYLED_ITEM('color',(#534535),#359664); +#534535 = PRESENTATION_STYLE_ASSIGNMENT((#534536)); +#534536 = SURFACE_STYLE_USAGE(.BOTH.,#534537); +#534537 = SURFACE_SIDE_STYLE('',(#534538)); +#534538 = SURFACE_STYLE_FILL_AREA(#534539); +#534539 = FILL_AREA_STYLE('',(#534540)); +#534540 = FILL_AREA_STYLE_COLOUR('',#533245); +#534541 = STYLED_ITEM('color',(#534542),#359954); +#534542 = PRESENTATION_STYLE_ASSIGNMENT((#534543)); +#534543 = SURFACE_STYLE_USAGE(.BOTH.,#534544); +#534544 = SURFACE_SIDE_STYLE('',(#534545)); +#534545 = SURFACE_STYLE_FILL_AREA(#534546); +#534546 = FILL_AREA_STYLE('',(#534547)); +#534547 = FILL_AREA_STYLE_COLOUR('',#533245); +#534548 = STYLED_ITEM('color',(#534549),#360244); +#534549 = PRESENTATION_STYLE_ASSIGNMENT((#534550)); +#534550 = SURFACE_STYLE_USAGE(.BOTH.,#534551); +#534551 = SURFACE_SIDE_STYLE('',(#534552)); +#534552 = SURFACE_STYLE_FILL_AREA(#534553); +#534553 = FILL_AREA_STYLE('',(#534554)); +#534554 = FILL_AREA_STYLE_COLOUR('',#533245); +#534555 = STYLED_ITEM('color',(#534556),#360534); +#534556 = PRESENTATION_STYLE_ASSIGNMENT((#534557)); +#534557 = SURFACE_STYLE_USAGE(.BOTH.,#534558); +#534558 = SURFACE_SIDE_STYLE('',(#534559)); +#534559 = SURFACE_STYLE_FILL_AREA(#534560); +#534560 = FILL_AREA_STYLE('',(#534561)); +#534561 = FILL_AREA_STYLE_COLOUR('',#533245); +#534562 = STYLED_ITEM('color',(#534563),#360824); +#534563 = PRESENTATION_STYLE_ASSIGNMENT((#534564)); +#534564 = SURFACE_STYLE_USAGE(.BOTH.,#534565); +#534565 = SURFACE_SIDE_STYLE('',(#534566)); +#534566 = SURFACE_STYLE_FILL_AREA(#534567); +#534567 = FILL_AREA_STYLE('',(#534568)); +#534568 = FILL_AREA_STYLE_COLOUR('',#533245); +#534569 = STYLED_ITEM('color',(#534570),#361114); +#534570 = PRESENTATION_STYLE_ASSIGNMENT((#534571)); +#534571 = SURFACE_STYLE_USAGE(.BOTH.,#534572); +#534572 = SURFACE_SIDE_STYLE('',(#534573)); +#534573 = SURFACE_STYLE_FILL_AREA(#534574); +#534574 = FILL_AREA_STYLE('',(#534575)); +#534575 = FILL_AREA_STYLE_COLOUR('',#533245); +#534576 = STYLED_ITEM('color',(#534577),#361404); +#534577 = PRESENTATION_STYLE_ASSIGNMENT((#534578)); +#534578 = SURFACE_STYLE_USAGE(.BOTH.,#534579); +#534579 = SURFACE_SIDE_STYLE('',(#534580)); +#534580 = SURFACE_STYLE_FILL_AREA(#534581); +#534581 = FILL_AREA_STYLE('',(#534582)); +#534582 = FILL_AREA_STYLE_COLOUR('',#533245); +#534583 = STYLED_ITEM('color',(#534584),#361694); +#534584 = PRESENTATION_STYLE_ASSIGNMENT((#534585)); +#534585 = SURFACE_STYLE_USAGE(.BOTH.,#534586); +#534586 = SURFACE_SIDE_STYLE('',(#534587)); +#534587 = SURFACE_STYLE_FILL_AREA(#534588); +#534588 = FILL_AREA_STYLE('',(#534589)); +#534589 = FILL_AREA_STYLE_COLOUR('',#533245); +#534590 = STYLED_ITEM('color',(#534591),#361984); +#534591 = PRESENTATION_STYLE_ASSIGNMENT((#534592)); +#534592 = SURFACE_STYLE_USAGE(.BOTH.,#534593); +#534593 = SURFACE_SIDE_STYLE('',(#534594)); +#534594 = SURFACE_STYLE_FILL_AREA(#534595); +#534595 = FILL_AREA_STYLE('',(#534596)); +#534596 = FILL_AREA_STYLE_COLOUR('',#533245); +#534597 = STYLED_ITEM('color',(#534598),#362274); +#534598 = PRESENTATION_STYLE_ASSIGNMENT((#534599)); +#534599 = SURFACE_STYLE_USAGE(.BOTH.,#534600); +#534600 = SURFACE_SIDE_STYLE('',(#534601)); +#534601 = SURFACE_STYLE_FILL_AREA(#534602); +#534602 = FILL_AREA_STYLE('',(#534603)); +#534603 = FILL_AREA_STYLE_COLOUR('',#533245); +#534604 = STYLED_ITEM('color',(#534605),#362564); +#534605 = PRESENTATION_STYLE_ASSIGNMENT((#534606)); +#534606 = SURFACE_STYLE_USAGE(.BOTH.,#534607); +#534607 = SURFACE_SIDE_STYLE('',(#534608)); +#534608 = SURFACE_STYLE_FILL_AREA(#534609); +#534609 = FILL_AREA_STYLE('',(#534610)); +#534610 = FILL_AREA_STYLE_COLOUR('',#533245); +#534611 = STYLED_ITEM('color',(#534612),#362854); +#534612 = PRESENTATION_STYLE_ASSIGNMENT((#534613)); +#534613 = SURFACE_STYLE_USAGE(.BOTH.,#534614); +#534614 = SURFACE_SIDE_STYLE('',(#534615)); +#534615 = SURFACE_STYLE_FILL_AREA(#534616); +#534616 = FILL_AREA_STYLE('',(#534617)); +#534617 = FILL_AREA_STYLE_COLOUR('',#533245); +#534618 = STYLED_ITEM('color',(#534619),#363144); +#534619 = PRESENTATION_STYLE_ASSIGNMENT((#534620)); +#534620 = SURFACE_STYLE_USAGE(.BOTH.,#534621); +#534621 = SURFACE_SIDE_STYLE('',(#534622)); +#534622 = SURFACE_STYLE_FILL_AREA(#534623); +#534623 = FILL_AREA_STYLE('',(#534624)); +#534624 = FILL_AREA_STYLE_COLOUR('',#533245); +#534625 = STYLED_ITEM('color',(#534626),#363434); +#534626 = PRESENTATION_STYLE_ASSIGNMENT((#534627)); +#534627 = SURFACE_STYLE_USAGE(.BOTH.,#534628); +#534628 = SURFACE_SIDE_STYLE('',(#534629)); +#534629 = SURFACE_STYLE_FILL_AREA(#534630); +#534630 = FILL_AREA_STYLE('',(#534631)); +#534631 = FILL_AREA_STYLE_COLOUR('',#533245); +#534632 = STYLED_ITEM('color',(#534633),#363724); +#534633 = PRESENTATION_STYLE_ASSIGNMENT((#534634)); +#534634 = SURFACE_STYLE_USAGE(.BOTH.,#534635); +#534635 = SURFACE_SIDE_STYLE('',(#534636)); +#534636 = SURFACE_STYLE_FILL_AREA(#534637); +#534637 = FILL_AREA_STYLE('',(#534638)); +#534638 = FILL_AREA_STYLE_COLOUR('',#533245); +#534639 = STYLED_ITEM('color',(#534640),#364014); +#534640 = PRESENTATION_STYLE_ASSIGNMENT((#534641)); +#534641 = SURFACE_STYLE_USAGE(.BOTH.,#534642); +#534642 = SURFACE_SIDE_STYLE('',(#534643)); +#534643 = SURFACE_STYLE_FILL_AREA(#534644); +#534644 = FILL_AREA_STYLE('',(#534645)); +#534645 = FILL_AREA_STYLE_COLOUR('',#533245); +#534646 = STYLED_ITEM('color',(#534647),#364304); +#534647 = PRESENTATION_STYLE_ASSIGNMENT((#534648)); +#534648 = SURFACE_STYLE_USAGE(.BOTH.,#534649); +#534649 = SURFACE_SIDE_STYLE('',(#534650)); +#534650 = SURFACE_STYLE_FILL_AREA(#534651); +#534651 = FILL_AREA_STYLE('',(#534652)); +#534652 = FILL_AREA_STYLE_COLOUR('',#533245); +#534653 = STYLED_ITEM('color',(#534654),#364594); +#534654 = PRESENTATION_STYLE_ASSIGNMENT((#534655)); +#534655 = SURFACE_STYLE_USAGE(.BOTH.,#534656); +#534656 = SURFACE_SIDE_STYLE('',(#534657)); +#534657 = SURFACE_STYLE_FILL_AREA(#534658); +#534658 = FILL_AREA_STYLE('',(#534659)); +#534659 = FILL_AREA_STYLE_COLOUR('',#533245); +#534660 = STYLED_ITEM('color',(#534661),#364884); +#534661 = PRESENTATION_STYLE_ASSIGNMENT((#534662)); +#534662 = SURFACE_STYLE_USAGE(.BOTH.,#534663); +#534663 = SURFACE_SIDE_STYLE('',(#534664)); +#534664 = SURFACE_STYLE_FILL_AREA(#534665); +#534665 = FILL_AREA_STYLE('',(#534666)); +#534666 = FILL_AREA_STYLE_COLOUR('',#533245); +#534667 = STYLED_ITEM('color',(#534668),#365174); +#534668 = PRESENTATION_STYLE_ASSIGNMENT((#534669)); +#534669 = SURFACE_STYLE_USAGE(.BOTH.,#534670); +#534670 = SURFACE_SIDE_STYLE('',(#534671)); +#534671 = SURFACE_STYLE_FILL_AREA(#534672); +#534672 = FILL_AREA_STYLE('',(#534673)); +#534673 = FILL_AREA_STYLE_COLOUR('',#533245); +#534674 = STYLED_ITEM('color',(#534675),#365464); +#534675 = PRESENTATION_STYLE_ASSIGNMENT((#534676)); +#534676 = SURFACE_STYLE_USAGE(.BOTH.,#534677); +#534677 = SURFACE_SIDE_STYLE('',(#534678)); +#534678 = SURFACE_STYLE_FILL_AREA(#534679); +#534679 = FILL_AREA_STYLE('',(#534680)); +#534680 = FILL_AREA_STYLE_COLOUR('',#533245); +#534681 = STYLED_ITEM('color',(#534682),#365754); +#534682 = PRESENTATION_STYLE_ASSIGNMENT((#534683)); +#534683 = SURFACE_STYLE_USAGE(.BOTH.,#534684); +#534684 = SURFACE_SIDE_STYLE('',(#534685)); +#534685 = SURFACE_STYLE_FILL_AREA(#534686); +#534686 = FILL_AREA_STYLE('',(#534687)); +#534687 = FILL_AREA_STYLE_COLOUR('',#533245); +#534688 = STYLED_ITEM('color',(#534689),#366044); +#534689 = PRESENTATION_STYLE_ASSIGNMENT((#534690)); +#534690 = SURFACE_STYLE_USAGE(.BOTH.,#534691); +#534691 = SURFACE_SIDE_STYLE('',(#534692)); +#534692 = SURFACE_STYLE_FILL_AREA(#534693); +#534693 = FILL_AREA_STYLE('',(#534694)); +#534694 = FILL_AREA_STYLE_COLOUR('',#533245); +#534695 = STYLED_ITEM('color',(#534696),#366334); +#534696 = PRESENTATION_STYLE_ASSIGNMENT((#534697)); +#534697 = SURFACE_STYLE_USAGE(.BOTH.,#534698); +#534698 = SURFACE_SIDE_STYLE('',(#534699)); +#534699 = SURFACE_STYLE_FILL_AREA(#534700); +#534700 = FILL_AREA_STYLE('',(#534701)); +#534701 = FILL_AREA_STYLE_COLOUR('',#533245); +#534702 = STYLED_ITEM('color',(#534703),#366624); +#534703 = PRESENTATION_STYLE_ASSIGNMENT((#534704)); +#534704 = SURFACE_STYLE_USAGE(.BOTH.,#534705); +#534705 = SURFACE_SIDE_STYLE('',(#534706)); +#534706 = SURFACE_STYLE_FILL_AREA(#534707); +#534707 = FILL_AREA_STYLE('',(#534708)); +#534708 = FILL_AREA_STYLE_COLOUR('',#533245); +#534709 = STYLED_ITEM('color',(#534710),#366914); +#534710 = PRESENTATION_STYLE_ASSIGNMENT((#534711)); +#534711 = SURFACE_STYLE_USAGE(.BOTH.,#534712); +#534712 = SURFACE_SIDE_STYLE('',(#534713)); +#534713 = SURFACE_STYLE_FILL_AREA(#534714); +#534714 = FILL_AREA_STYLE('',(#534715)); +#534715 = FILL_AREA_STYLE_COLOUR('',#533245); +#534716 = STYLED_ITEM('color',(#534717),#367204); +#534717 = PRESENTATION_STYLE_ASSIGNMENT((#534718)); +#534718 = SURFACE_STYLE_USAGE(.BOTH.,#534719); +#534719 = SURFACE_SIDE_STYLE('',(#534720)); +#534720 = SURFACE_STYLE_FILL_AREA(#534721); +#534721 = FILL_AREA_STYLE('',(#534722)); +#534722 = FILL_AREA_STYLE_COLOUR('',#533245); +#534723 = STYLED_ITEM('color',(#534724),#367494); +#534724 = PRESENTATION_STYLE_ASSIGNMENT((#534725)); +#534725 = SURFACE_STYLE_USAGE(.BOTH.,#534726); +#534726 = SURFACE_SIDE_STYLE('',(#534727)); +#534727 = SURFACE_STYLE_FILL_AREA(#534728); +#534728 = FILL_AREA_STYLE('',(#534729)); +#534729 = FILL_AREA_STYLE_COLOUR('',#533245); +#534730 = STYLED_ITEM('color',(#534731),#367784); +#534731 = PRESENTATION_STYLE_ASSIGNMENT((#534732)); +#534732 = SURFACE_STYLE_USAGE(.BOTH.,#534733); +#534733 = SURFACE_SIDE_STYLE('',(#534734)); +#534734 = SURFACE_STYLE_FILL_AREA(#534735); +#534735 = FILL_AREA_STYLE('',(#534736)); +#534736 = FILL_AREA_STYLE_COLOUR('',#533245); +#534737 = STYLED_ITEM('color',(#534738),#368074); +#534738 = PRESENTATION_STYLE_ASSIGNMENT((#534739)); +#534739 = SURFACE_STYLE_USAGE(.BOTH.,#534740); +#534740 = SURFACE_SIDE_STYLE('',(#534741)); +#534741 = SURFACE_STYLE_FILL_AREA(#534742); +#534742 = FILL_AREA_STYLE('',(#534743)); +#534743 = FILL_AREA_STYLE_COLOUR('',#533245); +#534744 = STYLED_ITEM('color',(#534745),#368166); +#534745 = PRESENTATION_STYLE_ASSIGNMENT((#534746)); +#534746 = SURFACE_STYLE_USAGE(.BOTH.,#534747); +#534747 = SURFACE_SIDE_STYLE('',(#534748)); +#534748 = SURFACE_STYLE_FILL_AREA(#534749); +#534749 = FILL_AREA_STYLE('',(#534750)); +#534750 = FILL_AREA_STYLE_COLOUR('',#533245); +#534751 = STYLED_ITEM('color',(#534752),#368258); +#534752 = PRESENTATION_STYLE_ASSIGNMENT((#534753)); +#534753 = SURFACE_STYLE_USAGE(.BOTH.,#534754); +#534754 = SURFACE_SIDE_STYLE('',(#534755)); +#534755 = SURFACE_STYLE_FILL_AREA(#534756); +#534756 = FILL_AREA_STYLE('',(#534757)); +#534757 = FILL_AREA_STYLE_COLOUR('',#533245); +#534758 = STYLED_ITEM('color',(#534759),#368350); +#534759 = PRESENTATION_STYLE_ASSIGNMENT((#534760)); +#534760 = SURFACE_STYLE_USAGE(.BOTH.,#534761); +#534761 = SURFACE_SIDE_STYLE('',(#534762)); +#534762 = SURFACE_STYLE_FILL_AREA(#534763); +#534763 = FILL_AREA_STYLE('',(#534764)); +#534764 = FILL_AREA_STYLE_COLOUR('',#533245); +#534765 = STYLED_ITEM('color',(#534766),#368640); +#534766 = PRESENTATION_STYLE_ASSIGNMENT((#534767)); +#534767 = SURFACE_STYLE_USAGE(.BOTH.,#534768); +#534768 = SURFACE_SIDE_STYLE('',(#534769)); +#534769 = SURFACE_STYLE_FILL_AREA(#534770); +#534770 = FILL_AREA_STYLE('',(#534771)); +#534771 = FILL_AREA_STYLE_COLOUR('',#533245); +#534772 = STYLED_ITEM('color',(#534773),#368930); +#534773 = PRESENTATION_STYLE_ASSIGNMENT((#534774)); +#534774 = SURFACE_STYLE_USAGE(.BOTH.,#534775); +#534775 = SURFACE_SIDE_STYLE('',(#534776)); +#534776 = SURFACE_STYLE_FILL_AREA(#534777); +#534777 = FILL_AREA_STYLE('',(#534778)); +#534778 = FILL_AREA_STYLE_COLOUR('',#533245); +#534779 = STYLED_ITEM('color',(#534780),#369220); +#534780 = PRESENTATION_STYLE_ASSIGNMENT((#534781)); +#534781 = SURFACE_STYLE_USAGE(.BOTH.,#534782); +#534782 = SURFACE_SIDE_STYLE('',(#534783)); +#534783 = SURFACE_STYLE_FILL_AREA(#534784); +#534784 = FILL_AREA_STYLE('',(#534785)); +#534785 = FILL_AREA_STYLE_COLOUR('',#533245); +#534786 = STYLED_ITEM('color',(#534787),#369510); +#534787 = PRESENTATION_STYLE_ASSIGNMENT((#534788)); +#534788 = SURFACE_STYLE_USAGE(.BOTH.,#534789); +#534789 = SURFACE_SIDE_STYLE('',(#534790)); +#534790 = SURFACE_STYLE_FILL_AREA(#534791); +#534791 = FILL_AREA_STYLE('',(#534792)); +#534792 = FILL_AREA_STYLE_COLOUR('',#533245); +#534793 = STYLED_ITEM('color',(#534794),#369602); +#534794 = PRESENTATION_STYLE_ASSIGNMENT((#534795)); +#534795 = SURFACE_STYLE_USAGE(.BOTH.,#534796); +#534796 = SURFACE_SIDE_STYLE('',(#534797)); +#534797 = SURFACE_STYLE_FILL_AREA(#534798); +#534798 = FILL_AREA_STYLE('',(#534799)); +#534799 = FILL_AREA_STYLE_COLOUR('',#533245); +#534800 = STYLED_ITEM('color',(#534801),#369694); +#534801 = PRESENTATION_STYLE_ASSIGNMENT((#534802)); +#534802 = SURFACE_STYLE_USAGE(.BOTH.,#534803); +#534803 = SURFACE_SIDE_STYLE('',(#534804)); +#534804 = SURFACE_STYLE_FILL_AREA(#534805); +#534805 = FILL_AREA_STYLE('',(#534806)); +#534806 = FILL_AREA_STYLE_COLOUR('',#533245); +#534807 = STYLED_ITEM('color',(#534808),#369786); +#534808 = PRESENTATION_STYLE_ASSIGNMENT((#534809)); +#534809 = SURFACE_STYLE_USAGE(.BOTH.,#534810); +#534810 = SURFACE_SIDE_STYLE('',(#534811)); +#534811 = SURFACE_STYLE_FILL_AREA(#534812); +#534812 = FILL_AREA_STYLE('',(#534813)); +#534813 = FILL_AREA_STYLE_COLOUR('',#533245); +#534814 = STYLED_ITEM('color',(#534815),#369936); +#534815 = PRESENTATION_STYLE_ASSIGNMENT((#534816)); +#534816 = SURFACE_STYLE_USAGE(.BOTH.,#534817); +#534817 = SURFACE_SIDE_STYLE('',(#534818)); +#534818 = SURFACE_STYLE_FILL_AREA(#534819); +#534819 = FILL_AREA_STYLE('',(#534820)); +#534820 = FILL_AREA_STYLE_COLOUR('',#533245); +#534821 = STYLED_ITEM('color',(#534822),#370226); +#534822 = PRESENTATION_STYLE_ASSIGNMENT((#534823)); +#534823 = SURFACE_STYLE_USAGE(.BOTH.,#534824); +#534824 = SURFACE_SIDE_STYLE('',(#534825)); +#534825 = SURFACE_STYLE_FILL_AREA(#534826); +#534826 = FILL_AREA_STYLE('',(#534827)); +#534827 = FILL_AREA_STYLE_COLOUR('',#533245); +#534828 = STYLED_ITEM('color',(#534829),#370318); +#534829 = PRESENTATION_STYLE_ASSIGNMENT((#534830)); +#534830 = SURFACE_STYLE_USAGE(.BOTH.,#534831); +#534831 = SURFACE_SIDE_STYLE('',(#534832)); +#534832 = SURFACE_STYLE_FILL_AREA(#534833); +#534833 = FILL_AREA_STYLE('',(#534834)); +#534834 = FILL_AREA_STYLE_COLOUR('',#533245); +#534835 = STYLED_ITEM('color',(#534836),#370410); +#534836 = PRESENTATION_STYLE_ASSIGNMENT((#534837)); +#534837 = SURFACE_STYLE_USAGE(.BOTH.,#534838); +#534838 = SURFACE_SIDE_STYLE('',(#534839)); +#534839 = SURFACE_STYLE_FILL_AREA(#534840); +#534840 = FILL_AREA_STYLE('',(#534841)); +#534841 = FILL_AREA_STYLE_COLOUR('',#533245); +#534842 = STYLED_ITEM('color',(#534843),#370502); +#534843 = PRESENTATION_STYLE_ASSIGNMENT((#534844)); +#534844 = SURFACE_STYLE_USAGE(.BOTH.,#534845); +#534845 = SURFACE_SIDE_STYLE('',(#534846)); +#534846 = SURFACE_STYLE_FILL_AREA(#534847); +#534847 = FILL_AREA_STYLE('',(#534848)); +#534848 = FILL_AREA_STYLE_COLOUR('',#533245); +#534849 = STYLED_ITEM('color',(#534850),#370792); +#534850 = PRESENTATION_STYLE_ASSIGNMENT((#534851)); +#534851 = SURFACE_STYLE_USAGE(.BOTH.,#534852); +#534852 = SURFACE_SIDE_STYLE('',(#534853)); +#534853 = SURFACE_STYLE_FILL_AREA(#534854); +#534854 = FILL_AREA_STYLE('',(#534855)); +#534855 = FILL_AREA_STYLE_COLOUR('',#533245); +#534856 = STYLED_ITEM('color',(#534857),#371082); +#534857 = PRESENTATION_STYLE_ASSIGNMENT((#534858)); +#534858 = SURFACE_STYLE_USAGE(.BOTH.,#534859); +#534859 = SURFACE_SIDE_STYLE('',(#534860)); +#534860 = SURFACE_STYLE_FILL_AREA(#534861); +#534861 = FILL_AREA_STYLE('',(#534862)); +#534862 = FILL_AREA_STYLE_COLOUR('',#533245); +#534863 = STYLED_ITEM('color',(#534864),#371372); +#534864 = PRESENTATION_STYLE_ASSIGNMENT((#534865)); +#534865 = SURFACE_STYLE_USAGE(.BOTH.,#534866); +#534866 = SURFACE_SIDE_STYLE('',(#534867)); +#534867 = SURFACE_STYLE_FILL_AREA(#534868); +#534868 = FILL_AREA_STYLE('',(#534869)); +#534869 = FILL_AREA_STYLE_COLOUR('',#533245); +#534870 = STYLED_ITEM('color',(#534871),#371662); +#534871 = PRESENTATION_STYLE_ASSIGNMENT((#534872)); +#534872 = SURFACE_STYLE_USAGE(.BOTH.,#534873); +#534873 = SURFACE_SIDE_STYLE('',(#534874)); +#534874 = SURFACE_STYLE_FILL_AREA(#534875); +#534875 = FILL_AREA_STYLE('',(#534876)); +#534876 = FILL_AREA_STYLE_COLOUR('',#533245); +#534877 = STYLED_ITEM('color',(#534878),#371812); +#534878 = PRESENTATION_STYLE_ASSIGNMENT((#534879)); +#534879 = SURFACE_STYLE_USAGE(.BOTH.,#534880); +#534880 = SURFACE_SIDE_STYLE('',(#534881)); +#534881 = SURFACE_STYLE_FILL_AREA(#534882); +#534882 = FILL_AREA_STYLE('',(#534883)); +#534883 = FILL_AREA_STYLE_COLOUR('',#533245); +#534884 = STYLED_ITEM('color',(#534885),#372102); +#534885 = PRESENTATION_STYLE_ASSIGNMENT((#534886)); +#534886 = SURFACE_STYLE_USAGE(.BOTH.,#534887); +#534887 = SURFACE_SIDE_STYLE('',(#534888)); +#534888 = SURFACE_STYLE_FILL_AREA(#534889); +#534889 = FILL_AREA_STYLE('',(#534890)); +#534890 = FILL_AREA_STYLE_COLOUR('',#533245); +#534891 = STYLED_ITEM('color',(#534892),#372392); +#534892 = PRESENTATION_STYLE_ASSIGNMENT((#534893)); +#534893 = SURFACE_STYLE_USAGE(.BOTH.,#534894); +#534894 = SURFACE_SIDE_STYLE('',(#534895)); +#534895 = SURFACE_STYLE_FILL_AREA(#534896); +#534896 = FILL_AREA_STYLE('',(#534897)); +#534897 = FILL_AREA_STYLE_COLOUR('',#533245); +#534898 = STYLED_ITEM('color',(#534899),#372682); +#534899 = PRESENTATION_STYLE_ASSIGNMENT((#534900)); +#534900 = SURFACE_STYLE_USAGE(.BOTH.,#534901); +#534901 = SURFACE_SIDE_STYLE('',(#534902)); +#534902 = SURFACE_STYLE_FILL_AREA(#534903); +#534903 = FILL_AREA_STYLE('',(#534904)); +#534904 = FILL_AREA_STYLE_COLOUR('',#533245); +#534905 = STYLED_ITEM('color',(#534906),#372972); +#534906 = PRESENTATION_STYLE_ASSIGNMENT((#534907)); +#534907 = SURFACE_STYLE_USAGE(.BOTH.,#534908); +#534908 = SURFACE_SIDE_STYLE('',(#534909)); +#534909 = SURFACE_STYLE_FILL_AREA(#534910); +#534910 = FILL_AREA_STYLE('',(#534911)); +#534911 = FILL_AREA_STYLE_COLOUR('',#533245); +#534912 = STYLED_ITEM('color',(#534913),#373262); +#534913 = PRESENTATION_STYLE_ASSIGNMENT((#534914)); +#534914 = SURFACE_STYLE_USAGE(.BOTH.,#534915); +#534915 = SURFACE_SIDE_STYLE('',(#534916)); +#534916 = SURFACE_STYLE_FILL_AREA(#534917); +#534917 = FILL_AREA_STYLE('',(#534918)); +#534918 = FILL_AREA_STYLE_COLOUR('',#533245); +#534919 = STYLED_ITEM('color',(#534920),#373354); +#534920 = PRESENTATION_STYLE_ASSIGNMENT((#534921)); +#534921 = SURFACE_STYLE_USAGE(.BOTH.,#534922); +#534922 = SURFACE_SIDE_STYLE('',(#534923)); +#534923 = SURFACE_STYLE_FILL_AREA(#534924); +#534924 = FILL_AREA_STYLE('',(#534925)); +#534925 = FILL_AREA_STYLE_COLOUR('',#533245); +#534926 = STYLED_ITEM('color',(#534927),#373446); +#534927 = PRESENTATION_STYLE_ASSIGNMENT((#534928)); +#534928 = SURFACE_STYLE_USAGE(.BOTH.,#534929); +#534929 = SURFACE_SIDE_STYLE('',(#534930)); +#534930 = SURFACE_STYLE_FILL_AREA(#534931); +#534931 = FILL_AREA_STYLE('',(#534932)); +#534932 = FILL_AREA_STYLE_COLOUR('',#533245); +#534933 = STYLED_ITEM('color',(#534934),#373538); +#534934 = PRESENTATION_STYLE_ASSIGNMENT((#534935)); +#534935 = SURFACE_STYLE_USAGE(.BOTH.,#534936); +#534936 = SURFACE_SIDE_STYLE('',(#534937)); +#534937 = SURFACE_STYLE_FILL_AREA(#534938); +#534938 = FILL_AREA_STYLE('',(#534939)); +#534939 = FILL_AREA_STYLE_COLOUR('',#533245); +#534940 = STYLED_ITEM('color',(#534941),#373630); +#534941 = PRESENTATION_STYLE_ASSIGNMENT((#534942)); +#534942 = SURFACE_STYLE_USAGE(.BOTH.,#534943); +#534943 = SURFACE_SIDE_STYLE('',(#534944)); +#534944 = SURFACE_STYLE_FILL_AREA(#534945); +#534945 = FILL_AREA_STYLE('',(#534946)); +#534946 = FILL_AREA_STYLE_COLOUR('',#533245); +#534947 = STYLED_ITEM('color',(#534948),#373722); +#534948 = PRESENTATION_STYLE_ASSIGNMENT((#534949)); +#534949 = SURFACE_STYLE_USAGE(.BOTH.,#534950); +#534950 = SURFACE_SIDE_STYLE('',(#534951)); +#534951 = SURFACE_STYLE_FILL_AREA(#534952); +#534952 = FILL_AREA_STYLE('',(#534953)); +#534953 = FILL_AREA_STYLE_COLOUR('',#533245); +#534954 = STYLED_ITEM('color',(#534955),#373814); +#534955 = PRESENTATION_STYLE_ASSIGNMENT((#534956)); +#534956 = SURFACE_STYLE_USAGE(.BOTH.,#534957); +#534957 = SURFACE_SIDE_STYLE('',(#534958)); +#534958 = SURFACE_STYLE_FILL_AREA(#534959); +#534959 = FILL_AREA_STYLE('',(#534960)); +#534960 = FILL_AREA_STYLE_COLOUR('',#533245); +#534961 = STYLED_ITEM('color',(#534962),#374104); +#534962 = PRESENTATION_STYLE_ASSIGNMENT((#534963)); +#534963 = SURFACE_STYLE_USAGE(.BOTH.,#534964); +#534964 = SURFACE_SIDE_STYLE('',(#534965)); +#534965 = SURFACE_STYLE_FILL_AREA(#534966); +#534966 = FILL_AREA_STYLE('',(#534967)); +#534967 = FILL_AREA_STYLE_COLOUR('',#533245); +#534968 = STYLED_ITEM('color',(#534969),#374394); +#534969 = PRESENTATION_STYLE_ASSIGNMENT((#534970)); +#534970 = SURFACE_STYLE_USAGE(.BOTH.,#534971); +#534971 = SURFACE_SIDE_STYLE('',(#534972)); +#534972 = SURFACE_STYLE_FILL_AREA(#534973); +#534973 = FILL_AREA_STYLE('',(#534974)); +#534974 = FILL_AREA_STYLE_COLOUR('',#533245); +#534975 = STYLED_ITEM('color',(#534976),#374684); +#534976 = PRESENTATION_STYLE_ASSIGNMENT((#534977)); +#534977 = SURFACE_STYLE_USAGE(.BOTH.,#534978); +#534978 = SURFACE_SIDE_STYLE('',(#534979)); +#534979 = SURFACE_STYLE_FILL_AREA(#534980); +#534980 = FILL_AREA_STYLE('',(#534981)); +#534981 = FILL_AREA_STYLE_COLOUR('',#533245); +#534982 = STYLED_ITEM('color',(#534983),#374974); +#534983 = PRESENTATION_STYLE_ASSIGNMENT((#534984)); +#534984 = SURFACE_STYLE_USAGE(.BOTH.,#534985); +#534985 = SURFACE_SIDE_STYLE('',(#534986)); +#534986 = SURFACE_STYLE_FILL_AREA(#534987); +#534987 = FILL_AREA_STYLE('',(#534988)); +#534988 = FILL_AREA_STYLE_COLOUR('',#533245); +#534989 = STYLED_ITEM('color',(#534990),#375264); +#534990 = PRESENTATION_STYLE_ASSIGNMENT((#534991)); +#534991 = SURFACE_STYLE_USAGE(.BOTH.,#534992); +#534992 = SURFACE_SIDE_STYLE('',(#534993)); +#534993 = SURFACE_STYLE_FILL_AREA(#534994); +#534994 = FILL_AREA_STYLE('',(#534995)); +#534995 = FILL_AREA_STYLE_COLOUR('',#533245); +#534996 = STYLED_ITEM('color',(#534997),#375554); +#534997 = PRESENTATION_STYLE_ASSIGNMENT((#534998)); +#534998 = SURFACE_STYLE_USAGE(.BOTH.,#534999); +#534999 = SURFACE_SIDE_STYLE('',(#535000)); +#535000 = SURFACE_STYLE_FILL_AREA(#535001); +#535001 = FILL_AREA_STYLE('',(#535002)); +#535002 = FILL_AREA_STYLE_COLOUR('',#533245); +#535003 = STYLED_ITEM('color',(#535004),#375844); +#535004 = PRESENTATION_STYLE_ASSIGNMENT((#535005)); +#535005 = SURFACE_STYLE_USAGE(.BOTH.,#535006); +#535006 = SURFACE_SIDE_STYLE('',(#535007)); +#535007 = SURFACE_STYLE_FILL_AREA(#535008); +#535008 = FILL_AREA_STYLE('',(#535009)); +#535009 = FILL_AREA_STYLE_COLOUR('',#533245); +#535010 = STYLED_ITEM('color',(#535011),#376134); +#535011 = PRESENTATION_STYLE_ASSIGNMENT((#535012)); +#535012 = SURFACE_STYLE_USAGE(.BOTH.,#535013); +#535013 = SURFACE_SIDE_STYLE('',(#535014)); +#535014 = SURFACE_STYLE_FILL_AREA(#535015); +#535015 = FILL_AREA_STYLE('',(#535016)); +#535016 = FILL_AREA_STYLE_COLOUR('',#533245); +#535017 = STYLED_ITEM('color',(#535018),#376424); +#535018 = PRESENTATION_STYLE_ASSIGNMENT((#535019)); +#535019 = SURFACE_STYLE_USAGE(.BOTH.,#535020); +#535020 = SURFACE_SIDE_STYLE('',(#535021)); +#535021 = SURFACE_STYLE_FILL_AREA(#535022); +#535022 = FILL_AREA_STYLE('',(#535023)); +#535023 = FILL_AREA_STYLE_COLOUR('',#533245); +#535024 = STYLED_ITEM('color',(#535025),#376714); +#535025 = PRESENTATION_STYLE_ASSIGNMENT((#535026)); +#535026 = SURFACE_STYLE_USAGE(.BOTH.,#535027); +#535027 = SURFACE_SIDE_STYLE('',(#535028)); +#535028 = SURFACE_STYLE_FILL_AREA(#535029); +#535029 = FILL_AREA_STYLE('',(#535030)); +#535030 = FILL_AREA_STYLE_COLOUR('',#533245); +#535031 = STYLED_ITEM('color',(#535032),#377004); +#535032 = PRESENTATION_STYLE_ASSIGNMENT((#535033)); +#535033 = SURFACE_STYLE_USAGE(.BOTH.,#535034); +#535034 = SURFACE_SIDE_STYLE('',(#535035)); +#535035 = SURFACE_STYLE_FILL_AREA(#535036); +#535036 = FILL_AREA_STYLE('',(#535037)); +#535037 = FILL_AREA_STYLE_COLOUR('',#533245); +#535038 = STYLED_ITEM('color',(#535039),#377294); +#535039 = PRESENTATION_STYLE_ASSIGNMENT((#535040)); +#535040 = SURFACE_STYLE_USAGE(.BOTH.,#535041); +#535041 = SURFACE_SIDE_STYLE('',(#535042)); +#535042 = SURFACE_STYLE_FILL_AREA(#535043); +#535043 = FILL_AREA_STYLE('',(#535044)); +#535044 = FILL_AREA_STYLE_COLOUR('',#533245); +#535045 = STYLED_ITEM('color',(#535046),#377584); +#535046 = PRESENTATION_STYLE_ASSIGNMENT((#535047)); +#535047 = SURFACE_STYLE_USAGE(.BOTH.,#535048); +#535048 = SURFACE_SIDE_STYLE('',(#535049)); +#535049 = SURFACE_STYLE_FILL_AREA(#535050); +#535050 = FILL_AREA_STYLE('',(#535051)); +#535051 = FILL_AREA_STYLE_COLOUR('',#533245); +#535052 = STYLED_ITEM('color',(#535053),#377874); +#535053 = PRESENTATION_STYLE_ASSIGNMENT((#535054)); +#535054 = SURFACE_STYLE_USAGE(.BOTH.,#535055); +#535055 = SURFACE_SIDE_STYLE('',(#535056)); +#535056 = SURFACE_STYLE_FILL_AREA(#535057); +#535057 = FILL_AREA_STYLE('',(#535058)); +#535058 = FILL_AREA_STYLE_COLOUR('',#533245); +#535059 = STYLED_ITEM('color',(#535060),#378164); +#535060 = PRESENTATION_STYLE_ASSIGNMENT((#535061)); +#535061 = SURFACE_STYLE_USAGE(.BOTH.,#535062); +#535062 = SURFACE_SIDE_STYLE('',(#535063)); +#535063 = SURFACE_STYLE_FILL_AREA(#535064); +#535064 = FILL_AREA_STYLE('',(#535065)); +#535065 = FILL_AREA_STYLE_COLOUR('',#533245); +#535066 = STYLED_ITEM('color',(#535067),#378454); +#535067 = PRESENTATION_STYLE_ASSIGNMENT((#535068)); +#535068 = SURFACE_STYLE_USAGE(.BOTH.,#535069); +#535069 = SURFACE_SIDE_STYLE('',(#535070)); +#535070 = SURFACE_STYLE_FILL_AREA(#535071); +#535071 = FILL_AREA_STYLE('',(#535072)); +#535072 = FILL_AREA_STYLE_COLOUR('',#533245); +#535073 = STYLED_ITEM('color',(#535074),#378744); +#535074 = PRESENTATION_STYLE_ASSIGNMENT((#535075)); +#535075 = SURFACE_STYLE_USAGE(.BOTH.,#535076); +#535076 = SURFACE_SIDE_STYLE('',(#535077)); +#535077 = SURFACE_STYLE_FILL_AREA(#535078); +#535078 = FILL_AREA_STYLE('',(#535079)); +#535079 = FILL_AREA_STYLE_COLOUR('',#533245); +#535080 = STYLED_ITEM('color',(#535081),#379034); +#535081 = PRESENTATION_STYLE_ASSIGNMENT((#535082)); +#535082 = SURFACE_STYLE_USAGE(.BOTH.,#535083); +#535083 = SURFACE_SIDE_STYLE('',(#535084)); +#535084 = SURFACE_STYLE_FILL_AREA(#535085); +#535085 = FILL_AREA_STYLE('',(#535086)); +#535086 = FILL_AREA_STYLE_COLOUR('',#533245); +#535087 = STYLED_ITEM('color',(#535088),#379324); +#535088 = PRESENTATION_STYLE_ASSIGNMENT((#535089)); +#535089 = SURFACE_STYLE_USAGE(.BOTH.,#535090); +#535090 = SURFACE_SIDE_STYLE('',(#535091)); +#535091 = SURFACE_STYLE_FILL_AREA(#535092); +#535092 = FILL_AREA_STYLE('',(#535093)); +#535093 = FILL_AREA_STYLE_COLOUR('',#533245); +#535094 = STYLED_ITEM('color',(#535095),#379614); +#535095 = PRESENTATION_STYLE_ASSIGNMENT((#535096)); +#535096 = SURFACE_STYLE_USAGE(.BOTH.,#535097); +#535097 = SURFACE_SIDE_STYLE('',(#535098)); +#535098 = SURFACE_STYLE_FILL_AREA(#535099); +#535099 = FILL_AREA_STYLE('',(#535100)); +#535100 = FILL_AREA_STYLE_COLOUR('',#533245); +#535101 = STYLED_ITEM('color',(#535102),#379764); +#535102 = PRESENTATION_STYLE_ASSIGNMENT((#535103)); +#535103 = SURFACE_STYLE_USAGE(.BOTH.,#535104); +#535104 = SURFACE_SIDE_STYLE('',(#535105)); +#535105 = SURFACE_STYLE_FILL_AREA(#535106); +#535106 = FILL_AREA_STYLE('',(#535107)); +#535107 = FILL_AREA_STYLE_COLOUR('',#533245); +#535108 = STYLED_ITEM('color',(#535109),#380054); +#535109 = PRESENTATION_STYLE_ASSIGNMENT((#535110)); +#535110 = SURFACE_STYLE_USAGE(.BOTH.,#535111); +#535111 = SURFACE_SIDE_STYLE('',(#535112)); +#535112 = SURFACE_STYLE_FILL_AREA(#535113); +#535113 = FILL_AREA_STYLE('',(#535114)); +#535114 = FILL_AREA_STYLE_COLOUR('',#533245); +#535115 = STYLED_ITEM('color',(#535116),#380204); +#535116 = PRESENTATION_STYLE_ASSIGNMENT((#535117)); +#535117 = SURFACE_STYLE_USAGE(.BOTH.,#535118); +#535118 = SURFACE_SIDE_STYLE('',(#535119)); +#535119 = SURFACE_STYLE_FILL_AREA(#535120); +#535120 = FILL_AREA_STYLE('',(#535121)); +#535121 = FILL_AREA_STYLE_COLOUR('',#533245); +#535122 = STYLED_ITEM('color',(#535123),#380494); +#535123 = PRESENTATION_STYLE_ASSIGNMENT((#535124)); +#535124 = SURFACE_STYLE_USAGE(.BOTH.,#535125); +#535125 = SURFACE_SIDE_STYLE('',(#535126)); +#535126 = SURFACE_STYLE_FILL_AREA(#535127); +#535127 = FILL_AREA_STYLE('',(#535128)); +#535128 = FILL_AREA_STYLE_COLOUR('',#533245); +#535129 = STYLED_ITEM('color',(#535130),#380586); +#535130 = PRESENTATION_STYLE_ASSIGNMENT((#535131)); +#535131 = SURFACE_STYLE_USAGE(.BOTH.,#535132); +#535132 = SURFACE_SIDE_STYLE('',(#535133)); +#535133 = SURFACE_STYLE_FILL_AREA(#535134); +#535134 = FILL_AREA_STYLE('',(#535135)); +#535135 = FILL_AREA_STYLE_COLOUR('',#533245); +#535136 = STYLED_ITEM('color',(#535137),#380678); +#535137 = PRESENTATION_STYLE_ASSIGNMENT((#535138)); +#535138 = SURFACE_STYLE_USAGE(.BOTH.,#535139); +#535139 = SURFACE_SIDE_STYLE('',(#535140)); +#535140 = SURFACE_STYLE_FILL_AREA(#535141); +#535141 = FILL_AREA_STYLE('',(#535142)); +#535142 = FILL_AREA_STYLE_COLOUR('',#533245); +#535143 = STYLED_ITEM('color',(#535144),#380770); +#535144 = PRESENTATION_STYLE_ASSIGNMENT((#535145)); +#535145 = SURFACE_STYLE_USAGE(.BOTH.,#535146); +#535146 = SURFACE_SIDE_STYLE('',(#535147)); +#535147 = SURFACE_STYLE_FILL_AREA(#535148); +#535148 = FILL_AREA_STYLE('',(#535149)); +#535149 = FILL_AREA_STYLE_COLOUR('',#533245); +#535150 = STYLED_ITEM('color',(#535151),#381060); +#535151 = PRESENTATION_STYLE_ASSIGNMENT((#535152)); +#535152 = SURFACE_STYLE_USAGE(.BOTH.,#535153); +#535153 = SURFACE_SIDE_STYLE('',(#535154)); +#535154 = SURFACE_STYLE_FILL_AREA(#535155); +#535155 = FILL_AREA_STYLE('',(#535156)); +#535156 = FILL_AREA_STYLE_COLOUR('',#533245); +#535157 = STYLED_ITEM('color',(#535158),#381350); +#535158 = PRESENTATION_STYLE_ASSIGNMENT((#535159)); +#535159 = SURFACE_STYLE_USAGE(.BOTH.,#535160); +#535160 = SURFACE_SIDE_STYLE('',(#535161)); +#535161 = SURFACE_STYLE_FILL_AREA(#535162); +#535162 = FILL_AREA_STYLE('',(#535163)); +#535163 = FILL_AREA_STYLE_COLOUR('',#533245); +#535164 = STYLED_ITEM('color',(#535165),#381640); +#535165 = PRESENTATION_STYLE_ASSIGNMENT((#535166)); +#535166 = SURFACE_STYLE_USAGE(.BOTH.,#535167); +#535167 = SURFACE_SIDE_STYLE('',(#535168)); +#535168 = SURFACE_STYLE_FILL_AREA(#535169); +#535169 = FILL_AREA_STYLE('',(#535170)); +#535170 = FILL_AREA_STYLE_COLOUR('',#533245); +#535171 = STYLED_ITEM('color',(#535172),#381930); +#535172 = PRESENTATION_STYLE_ASSIGNMENT((#535173)); +#535173 = SURFACE_STYLE_USAGE(.BOTH.,#535174); +#535174 = SURFACE_SIDE_STYLE('',(#535175)); +#535175 = SURFACE_STYLE_FILL_AREA(#535176); +#535176 = FILL_AREA_STYLE('',(#535177)); +#535177 = FILL_AREA_STYLE_COLOUR('',#533245); +#535178 = STYLED_ITEM('color',(#535179),#382220); +#535179 = PRESENTATION_STYLE_ASSIGNMENT((#535180)); +#535180 = SURFACE_STYLE_USAGE(.BOTH.,#535181); +#535181 = SURFACE_SIDE_STYLE('',(#535182)); +#535182 = SURFACE_STYLE_FILL_AREA(#535183); +#535183 = FILL_AREA_STYLE('',(#535184)); +#535184 = FILL_AREA_STYLE_COLOUR('',#533245); +#535185 = STYLED_ITEM('color',(#535186),#382510); +#535186 = PRESENTATION_STYLE_ASSIGNMENT((#535187)); +#535187 = SURFACE_STYLE_USAGE(.BOTH.,#535188); +#535188 = SURFACE_SIDE_STYLE('',(#535189)); +#535189 = SURFACE_STYLE_FILL_AREA(#535190); +#535190 = FILL_AREA_STYLE('',(#535191)); +#535191 = FILL_AREA_STYLE_COLOUR('',#533245); +#535192 = STYLED_ITEM('color',(#535193),#382800); +#535193 = PRESENTATION_STYLE_ASSIGNMENT((#535194)); +#535194 = SURFACE_STYLE_USAGE(.BOTH.,#535195); +#535195 = SURFACE_SIDE_STYLE('',(#535196)); +#535196 = SURFACE_STYLE_FILL_AREA(#535197); +#535197 = FILL_AREA_STYLE('',(#535198)); +#535198 = FILL_AREA_STYLE_COLOUR('',#533245); +#535199 = STYLED_ITEM('color',(#535200),#383090); +#535200 = PRESENTATION_STYLE_ASSIGNMENT((#535201)); +#535201 = SURFACE_STYLE_USAGE(.BOTH.,#535202); +#535202 = SURFACE_SIDE_STYLE('',(#535203)); +#535203 = SURFACE_STYLE_FILL_AREA(#535204); +#535204 = FILL_AREA_STYLE('',(#535205)); +#535205 = FILL_AREA_STYLE_COLOUR('',#533245); +#535206 = STYLED_ITEM('color',(#535207),#383380); +#535207 = PRESENTATION_STYLE_ASSIGNMENT((#535208)); +#535208 = SURFACE_STYLE_USAGE(.BOTH.,#535209); +#535209 = SURFACE_SIDE_STYLE('',(#535210)); +#535210 = SURFACE_STYLE_FILL_AREA(#535211); +#535211 = FILL_AREA_STYLE('',(#535212)); +#535212 = FILL_AREA_STYLE_COLOUR('',#533245); +#535213 = STYLED_ITEM('color',(#535214),#383530); +#535214 = PRESENTATION_STYLE_ASSIGNMENT((#535215)); +#535215 = SURFACE_STYLE_USAGE(.BOTH.,#535216); +#535216 = SURFACE_SIDE_STYLE('',(#535217)); +#535217 = SURFACE_STYLE_FILL_AREA(#535218); +#535218 = FILL_AREA_STYLE('',(#535219)); +#535219 = FILL_AREA_STYLE_COLOUR('',#533245); +#535220 = STYLED_ITEM('color',(#535221),#383680); +#535221 = PRESENTATION_STYLE_ASSIGNMENT((#535222)); +#535222 = SURFACE_STYLE_USAGE(.BOTH.,#535223); +#535223 = SURFACE_SIDE_STYLE('',(#535224)); +#535224 = SURFACE_STYLE_FILL_AREA(#535225); +#535225 = FILL_AREA_STYLE('',(#535226)); +#535226 = FILL_AREA_STYLE_COLOUR('',#533245); +#535227 = STYLED_ITEM('color',(#535228),#383830); +#535228 = PRESENTATION_STYLE_ASSIGNMENT((#535229)); +#535229 = SURFACE_STYLE_USAGE(.BOTH.,#535230); +#535230 = SURFACE_SIDE_STYLE('',(#535231)); +#535231 = SURFACE_STYLE_FILL_AREA(#535232); +#535232 = FILL_AREA_STYLE('',(#535233)); +#535233 = FILL_AREA_STYLE_COLOUR('',#533245); +#535234 = STYLED_ITEM('color',(#535235),#383980); +#535235 = PRESENTATION_STYLE_ASSIGNMENT((#535236)); +#535236 = SURFACE_STYLE_USAGE(.BOTH.,#535237); +#535237 = SURFACE_SIDE_STYLE('',(#535238)); +#535238 = SURFACE_STYLE_FILL_AREA(#535239); +#535239 = FILL_AREA_STYLE('',(#535240)); +#535240 = FILL_AREA_STYLE_COLOUR('',#533245); +#535241 = STYLED_ITEM('color',(#535242),#384130); +#535242 = PRESENTATION_STYLE_ASSIGNMENT((#535243)); +#535243 = SURFACE_STYLE_USAGE(.BOTH.,#535244); +#535244 = SURFACE_SIDE_STYLE('',(#535245)); +#535245 = SURFACE_STYLE_FILL_AREA(#535246); +#535246 = FILL_AREA_STYLE('',(#535247)); +#535247 = FILL_AREA_STYLE_COLOUR('',#533245); +#535248 = STYLED_ITEM('color',(#535249),#384280); +#535249 = PRESENTATION_STYLE_ASSIGNMENT((#535250)); +#535250 = SURFACE_STYLE_USAGE(.BOTH.,#535251); +#535251 = SURFACE_SIDE_STYLE('',(#535252)); +#535252 = SURFACE_STYLE_FILL_AREA(#535253); +#535253 = FILL_AREA_STYLE('',(#535254)); +#535254 = FILL_AREA_STYLE_COLOUR('',#533245); +#535255 = STYLED_ITEM('color',(#535256),#384430); +#535256 = PRESENTATION_STYLE_ASSIGNMENT((#535257)); +#535257 = SURFACE_STYLE_USAGE(.BOTH.,#535258); +#535258 = SURFACE_SIDE_STYLE('',(#535259)); +#535259 = SURFACE_STYLE_FILL_AREA(#535260); +#535260 = FILL_AREA_STYLE('',(#535261)); +#535261 = FILL_AREA_STYLE_COLOUR('',#533245); +#535262 = STYLED_ITEM('color',(#535263),#384580); +#535263 = PRESENTATION_STYLE_ASSIGNMENT((#535264)); +#535264 = SURFACE_STYLE_USAGE(.BOTH.,#535265); +#535265 = SURFACE_SIDE_STYLE('',(#535266)); +#535266 = SURFACE_STYLE_FILL_AREA(#535267); +#535267 = FILL_AREA_STYLE('',(#535268)); +#535268 = FILL_AREA_STYLE_COLOUR('',#533245); +#535269 = STYLED_ITEM('color',(#535270),#384730); +#535270 = PRESENTATION_STYLE_ASSIGNMENT((#535271)); +#535271 = SURFACE_STYLE_USAGE(.BOTH.,#535272); +#535272 = SURFACE_SIDE_STYLE('',(#535273)); +#535273 = SURFACE_STYLE_FILL_AREA(#535274); +#535274 = FILL_AREA_STYLE('',(#535275)); +#535275 = FILL_AREA_STYLE_COLOUR('',#533245); +#535276 = STYLED_ITEM('color',(#535277),#384880); +#535277 = PRESENTATION_STYLE_ASSIGNMENT((#535278)); +#535278 = SURFACE_STYLE_USAGE(.BOTH.,#535279); +#535279 = SURFACE_SIDE_STYLE('',(#535280)); +#535280 = SURFACE_STYLE_FILL_AREA(#535281); +#535281 = FILL_AREA_STYLE('',(#535282)); +#535282 = FILL_AREA_STYLE_COLOUR('',#533245); +#535283 = STYLED_ITEM('color',(#535284),#385030); +#535284 = PRESENTATION_STYLE_ASSIGNMENT((#535285)); +#535285 = SURFACE_STYLE_USAGE(.BOTH.,#535286); +#535286 = SURFACE_SIDE_STYLE('',(#535287)); +#535287 = SURFACE_STYLE_FILL_AREA(#535288); +#535288 = FILL_AREA_STYLE('',(#535289)); +#535289 = FILL_AREA_STYLE_COLOUR('',#533245); +#535290 = STYLED_ITEM('color',(#535291),#385180); +#535291 = PRESENTATION_STYLE_ASSIGNMENT((#535292)); +#535292 = SURFACE_STYLE_USAGE(.BOTH.,#535293); +#535293 = SURFACE_SIDE_STYLE('',(#535294)); +#535294 = SURFACE_STYLE_FILL_AREA(#535295); +#535295 = FILL_AREA_STYLE('',(#535296)); +#535296 = FILL_AREA_STYLE_COLOUR('',#533245); +#535297 = STYLED_ITEM('color',(#535298),#385330); +#535298 = PRESENTATION_STYLE_ASSIGNMENT((#535299)); +#535299 = SURFACE_STYLE_USAGE(.BOTH.,#535300); +#535300 = SURFACE_SIDE_STYLE('',(#535301)); +#535301 = SURFACE_STYLE_FILL_AREA(#535302); +#535302 = FILL_AREA_STYLE('',(#535303)); +#535303 = FILL_AREA_STYLE_COLOUR('',#533245); +#535304 = STYLED_ITEM('color',(#535305),#385620); +#535305 = PRESENTATION_STYLE_ASSIGNMENT((#535306)); +#535306 = SURFACE_STYLE_USAGE(.BOTH.,#535307); +#535307 = SURFACE_SIDE_STYLE('',(#535308)); +#535308 = SURFACE_STYLE_FILL_AREA(#535309); +#535309 = FILL_AREA_STYLE('',(#535310)); +#535310 = FILL_AREA_STYLE_COLOUR('',#533245); +#535311 = STYLED_ITEM('color',(#535312),#385910); +#535312 = PRESENTATION_STYLE_ASSIGNMENT((#535313)); +#535313 = SURFACE_STYLE_USAGE(.BOTH.,#535314); +#535314 = SURFACE_SIDE_STYLE('',(#535315)); +#535315 = SURFACE_STYLE_FILL_AREA(#535316); +#535316 = FILL_AREA_STYLE('',(#535317)); +#535317 = FILL_AREA_STYLE_COLOUR('',#533245); +#535318 = STYLED_ITEM('color',(#535319),#386200); +#535319 = PRESENTATION_STYLE_ASSIGNMENT((#535320)); +#535320 = SURFACE_STYLE_USAGE(.BOTH.,#535321); +#535321 = SURFACE_SIDE_STYLE('',(#535322)); +#535322 = SURFACE_STYLE_FILL_AREA(#535323); +#535323 = FILL_AREA_STYLE('',(#535324)); +#535324 = FILL_AREA_STYLE_COLOUR('',#533245); +#535325 = STYLED_ITEM('color',(#535326),#386490); +#535326 = PRESENTATION_STYLE_ASSIGNMENT((#535327)); +#535327 = SURFACE_STYLE_USAGE(.BOTH.,#535328); +#535328 = SURFACE_SIDE_STYLE('',(#535329)); +#535329 = SURFACE_STYLE_FILL_AREA(#535330); +#535330 = FILL_AREA_STYLE('',(#535331)); +#535331 = FILL_AREA_STYLE_COLOUR('',#533245); +#535332 = STYLED_ITEM('color',(#535333),#386780); +#535333 = PRESENTATION_STYLE_ASSIGNMENT((#535334)); +#535334 = SURFACE_STYLE_USAGE(.BOTH.,#535335); +#535335 = SURFACE_SIDE_STYLE('',(#535336)); +#535336 = SURFACE_STYLE_FILL_AREA(#535337); +#535337 = FILL_AREA_STYLE('',(#535338)); +#535338 = FILL_AREA_STYLE_COLOUR('',#533245); +#535339 = STYLED_ITEM('color',(#535340),#387070); +#535340 = PRESENTATION_STYLE_ASSIGNMENT((#535341)); +#535341 = SURFACE_STYLE_USAGE(.BOTH.,#535342); +#535342 = SURFACE_SIDE_STYLE('',(#535343)); +#535343 = SURFACE_STYLE_FILL_AREA(#535344); +#535344 = FILL_AREA_STYLE('',(#535345)); +#535345 = FILL_AREA_STYLE_COLOUR('',#533245); +#535346 = STYLED_ITEM('color',(#535347),#387360); +#535347 = PRESENTATION_STYLE_ASSIGNMENT((#535348)); +#535348 = SURFACE_STYLE_USAGE(.BOTH.,#535349); +#535349 = SURFACE_SIDE_STYLE('',(#535350)); +#535350 = SURFACE_STYLE_FILL_AREA(#535351); +#535351 = FILL_AREA_STYLE('',(#535352)); +#535352 = FILL_AREA_STYLE_COLOUR('',#533245); +#535353 = STYLED_ITEM('color',(#535354),#387650); +#535354 = PRESENTATION_STYLE_ASSIGNMENT((#535355)); +#535355 = SURFACE_STYLE_USAGE(.BOTH.,#535356); +#535356 = SURFACE_SIDE_STYLE('',(#535357)); +#535357 = SURFACE_STYLE_FILL_AREA(#535358); +#535358 = FILL_AREA_STYLE('',(#535359)); +#535359 = FILL_AREA_STYLE_COLOUR('',#533245); +#535360 = STYLED_ITEM('color',(#535361),#387940); +#535361 = PRESENTATION_STYLE_ASSIGNMENT((#535362)); +#535362 = SURFACE_STYLE_USAGE(.BOTH.,#535363); +#535363 = SURFACE_SIDE_STYLE('',(#535364)); +#535364 = SURFACE_STYLE_FILL_AREA(#535365); +#535365 = FILL_AREA_STYLE('',(#535366)); +#535366 = FILL_AREA_STYLE_COLOUR('',#533245); +#535367 = STYLED_ITEM('color',(#535368),#388230); +#535368 = PRESENTATION_STYLE_ASSIGNMENT((#535369)); +#535369 = SURFACE_STYLE_USAGE(.BOTH.,#535370); +#535370 = SURFACE_SIDE_STYLE('',(#535371)); +#535371 = SURFACE_STYLE_FILL_AREA(#535372); +#535372 = FILL_AREA_STYLE('',(#535373)); +#535373 = FILL_AREA_STYLE_COLOUR('',#533245); +#535374 = STYLED_ITEM('color',(#535375),#388520); +#535375 = PRESENTATION_STYLE_ASSIGNMENT((#535376)); +#535376 = SURFACE_STYLE_USAGE(.BOTH.,#535377); +#535377 = SURFACE_SIDE_STYLE('',(#535378)); +#535378 = SURFACE_STYLE_FILL_AREA(#535379); +#535379 = FILL_AREA_STYLE('',(#535380)); +#535380 = FILL_AREA_STYLE_COLOUR('',#533245); +#535381 = STYLED_ITEM('color',(#535382),#388810); +#535382 = PRESENTATION_STYLE_ASSIGNMENT((#535383)); +#535383 = SURFACE_STYLE_USAGE(.BOTH.,#535384); +#535384 = SURFACE_SIDE_STYLE('',(#535385)); +#535385 = SURFACE_STYLE_FILL_AREA(#535386); +#535386 = FILL_AREA_STYLE('',(#535387)); +#535387 = FILL_AREA_STYLE_COLOUR('',#533245); +#535388 = STYLED_ITEM('color',(#535389),#389100); +#535389 = PRESENTATION_STYLE_ASSIGNMENT((#535390)); +#535390 = SURFACE_STYLE_USAGE(.BOTH.,#535391); +#535391 = SURFACE_SIDE_STYLE('',(#535392)); +#535392 = SURFACE_STYLE_FILL_AREA(#535393); +#535393 = FILL_AREA_STYLE('',(#535394)); +#535394 = FILL_AREA_STYLE_COLOUR('',#533245); +#535395 = STYLED_ITEM('color',(#535396),#389390); +#535396 = PRESENTATION_STYLE_ASSIGNMENT((#535397)); +#535397 = SURFACE_STYLE_USAGE(.BOTH.,#535398); +#535398 = SURFACE_SIDE_STYLE('',(#535399)); +#535399 = SURFACE_STYLE_FILL_AREA(#535400); +#535400 = FILL_AREA_STYLE('',(#535401)); +#535401 = FILL_AREA_STYLE_COLOUR('',#533245); +#535402 = STYLED_ITEM('color',(#535403),#389684); +#535403 = PRESENTATION_STYLE_ASSIGNMENT((#535404)); +#535404 = SURFACE_STYLE_USAGE(.BOTH.,#535405); +#535405 = SURFACE_SIDE_STYLE('',(#535406)); +#535406 = SURFACE_STYLE_FILL_AREA(#535407); +#535407 = FILL_AREA_STYLE('',(#535408)); +#535408 = FILL_AREA_STYLE_COLOUR('',#533245); +#535409 = STYLED_ITEM('color',(#535410),#389978); +#535410 = PRESENTATION_STYLE_ASSIGNMENT((#535411)); +#535411 = SURFACE_STYLE_USAGE(.BOTH.,#535412); +#535412 = SURFACE_SIDE_STYLE('',(#535413)); +#535413 = SURFACE_STYLE_FILL_AREA(#535414); +#535414 = FILL_AREA_STYLE('',(#535415)); +#535415 = FILL_AREA_STYLE_COLOUR('',#533245); +#535416 = STYLED_ITEM('color',(#535417),#390272); +#535417 = PRESENTATION_STYLE_ASSIGNMENT((#535418)); +#535418 = SURFACE_STYLE_USAGE(.BOTH.,#535419); +#535419 = SURFACE_SIDE_STYLE('',(#535420)); +#535420 = SURFACE_STYLE_FILL_AREA(#535421); +#535421 = FILL_AREA_STYLE('',(#535422)); +#535422 = FILL_AREA_STYLE_COLOUR('',#533245); +#535423 = STYLED_ITEM('color',(#535424),#390566); +#535424 = PRESENTATION_STYLE_ASSIGNMENT((#535425)); +#535425 = SURFACE_STYLE_USAGE(.BOTH.,#535426); +#535426 = SURFACE_SIDE_STYLE('',(#535427)); +#535427 = SURFACE_STYLE_FILL_AREA(#535428); +#535428 = FILL_AREA_STYLE('',(#535429)); +#535429 = FILL_AREA_STYLE_COLOUR('',#533245); +#535430 = STYLED_ITEM('color',(#535431),#390860); +#535431 = PRESENTATION_STYLE_ASSIGNMENT((#535432)); +#535432 = SURFACE_STYLE_USAGE(.BOTH.,#535433); +#535433 = SURFACE_SIDE_STYLE('',(#535434)); +#535434 = SURFACE_STYLE_FILL_AREA(#535435); +#535435 = FILL_AREA_STYLE('',(#535436)); +#535436 = FILL_AREA_STYLE_COLOUR('',#533245); +#535437 = STYLED_ITEM('color',(#535438),#391154); +#535438 = PRESENTATION_STYLE_ASSIGNMENT((#535439)); +#535439 = SURFACE_STYLE_USAGE(.BOTH.,#535440); +#535440 = SURFACE_SIDE_STYLE('',(#535441)); +#535441 = SURFACE_STYLE_FILL_AREA(#535442); +#535442 = FILL_AREA_STYLE('',(#535443)); +#535443 = FILL_AREA_STYLE_COLOUR('',#533245); +#535444 = STYLED_ITEM('color',(#535445),#391448); +#535445 = PRESENTATION_STYLE_ASSIGNMENT((#535446)); +#535446 = SURFACE_STYLE_USAGE(.BOTH.,#535447); +#535447 = SURFACE_SIDE_STYLE('',(#535448)); +#535448 = SURFACE_STYLE_FILL_AREA(#535449); +#535449 = FILL_AREA_STYLE('',(#535450)); +#535450 = FILL_AREA_STYLE_COLOUR('',#533245); +#535451 = STYLED_ITEM('color',(#535452),#391742); +#535452 = PRESENTATION_STYLE_ASSIGNMENT((#535453)); +#535453 = SURFACE_STYLE_USAGE(.BOTH.,#535454); +#535454 = SURFACE_SIDE_STYLE('',(#535455)); +#535455 = SURFACE_STYLE_FILL_AREA(#535456); +#535456 = FILL_AREA_STYLE('',(#535457)); +#535457 = FILL_AREA_STYLE_COLOUR('',#533245); +#535458 = STYLED_ITEM('color',(#535459),#392036); +#535459 = PRESENTATION_STYLE_ASSIGNMENT((#535460)); +#535460 = SURFACE_STYLE_USAGE(.BOTH.,#535461); +#535461 = SURFACE_SIDE_STYLE('',(#535462)); +#535462 = SURFACE_STYLE_FILL_AREA(#535463); +#535463 = FILL_AREA_STYLE('',(#535464)); +#535464 = FILL_AREA_STYLE_COLOUR('',#533245); +#535465 = STYLED_ITEM('color',(#535466),#392330); +#535466 = PRESENTATION_STYLE_ASSIGNMENT((#535467)); +#535467 = SURFACE_STYLE_USAGE(.BOTH.,#535468); +#535468 = SURFACE_SIDE_STYLE('',(#535469)); +#535469 = SURFACE_STYLE_FILL_AREA(#535470); +#535470 = FILL_AREA_STYLE('',(#535471)); +#535471 = FILL_AREA_STYLE_COLOUR('',#533245); +#535472 = STYLED_ITEM('color',(#535473),#392624); +#535473 = PRESENTATION_STYLE_ASSIGNMENT((#535474)); +#535474 = SURFACE_STYLE_USAGE(.BOTH.,#535475); +#535475 = SURFACE_SIDE_STYLE('',(#535476)); +#535476 = SURFACE_STYLE_FILL_AREA(#535477); +#535477 = FILL_AREA_STYLE('',(#535478)); +#535478 = FILL_AREA_STYLE_COLOUR('',#533245); +#535479 = STYLED_ITEM('color',(#535480),#392918); +#535480 = PRESENTATION_STYLE_ASSIGNMENT((#535481)); +#535481 = SURFACE_STYLE_USAGE(.BOTH.,#535482); +#535482 = SURFACE_SIDE_STYLE('',(#535483)); +#535483 = SURFACE_STYLE_FILL_AREA(#535484); +#535484 = FILL_AREA_STYLE('',(#535485)); +#535485 = FILL_AREA_STYLE_COLOUR('',#533245); +#535486 = STYLED_ITEM('color',(#535487),#393208); +#535487 = PRESENTATION_STYLE_ASSIGNMENT((#535488)); +#535488 = SURFACE_STYLE_USAGE(.BOTH.,#535489); +#535489 = SURFACE_SIDE_STYLE('',(#535490)); +#535490 = SURFACE_STYLE_FILL_AREA(#535491); +#535491 = FILL_AREA_STYLE('',(#535492)); +#535492 = FILL_AREA_STYLE_COLOUR('',#533245); +#535493 = STYLED_ITEM('color',(#535494),#393300); +#535494 = PRESENTATION_STYLE_ASSIGNMENT((#535495)); +#535495 = SURFACE_STYLE_USAGE(.BOTH.,#535496); +#535496 = SURFACE_SIDE_STYLE('',(#535497)); +#535497 = SURFACE_STYLE_FILL_AREA(#535498); +#535498 = FILL_AREA_STYLE('',(#535499)); +#535499 = FILL_AREA_STYLE_COLOUR('',#533245); +#535500 = STYLED_ITEM('color',(#535501),#393392); +#535501 = PRESENTATION_STYLE_ASSIGNMENT((#535502)); +#535502 = SURFACE_STYLE_USAGE(.BOTH.,#535503); +#535503 = SURFACE_SIDE_STYLE('',(#535504)); +#535504 = SURFACE_STYLE_FILL_AREA(#535505); +#535505 = FILL_AREA_STYLE('',(#535506)); +#535506 = FILL_AREA_STYLE_COLOUR('',#533245); +#535507 = STYLED_ITEM('color',(#535508),#393484); +#535508 = PRESENTATION_STYLE_ASSIGNMENT((#535509)); +#535509 = SURFACE_STYLE_USAGE(.BOTH.,#535510); +#535510 = SURFACE_SIDE_STYLE('',(#535511)); +#535511 = SURFACE_STYLE_FILL_AREA(#535512); +#535512 = FILL_AREA_STYLE('',(#535513)); +#535513 = FILL_AREA_STYLE_COLOUR('',#533245); +#535514 = STYLED_ITEM('color',(#535515),#393576); +#535515 = PRESENTATION_STYLE_ASSIGNMENT((#535516)); +#535516 = SURFACE_STYLE_USAGE(.BOTH.,#535517); +#535517 = SURFACE_SIDE_STYLE('',(#535518)); +#535518 = SURFACE_STYLE_FILL_AREA(#535519); +#535519 = FILL_AREA_STYLE('',(#535520)); +#535520 = FILL_AREA_STYLE_COLOUR('',#533245); +#535521 = STYLED_ITEM('color',(#535522),#393668); +#535522 = PRESENTATION_STYLE_ASSIGNMENT((#535523)); +#535523 = SURFACE_STYLE_USAGE(.BOTH.,#535524); +#535524 = SURFACE_SIDE_STYLE('',(#535525)); +#535525 = SURFACE_STYLE_FILL_AREA(#535526); +#535526 = FILL_AREA_STYLE('',(#535527)); +#535527 = FILL_AREA_STYLE_COLOUR('',#533245); +#535528 = STYLED_ITEM('color',(#535529),#393760); +#535529 = PRESENTATION_STYLE_ASSIGNMENT((#535530)); +#535530 = SURFACE_STYLE_USAGE(.BOTH.,#535531); +#535531 = SURFACE_SIDE_STYLE('',(#535532)); +#535532 = SURFACE_STYLE_FILL_AREA(#535533); +#535533 = FILL_AREA_STYLE('',(#535534)); +#535534 = FILL_AREA_STYLE_COLOUR('',#533245); +#535535 = STYLED_ITEM('color',(#535536),#393852); +#535536 = PRESENTATION_STYLE_ASSIGNMENT((#535537)); +#535537 = SURFACE_STYLE_USAGE(.BOTH.,#535538); +#535538 = SURFACE_SIDE_STYLE('',(#535539)); +#535539 = SURFACE_STYLE_FILL_AREA(#535540); +#535540 = FILL_AREA_STYLE('',(#535541)); +#535541 = FILL_AREA_STYLE_COLOUR('',#533245); +#535542 = STYLED_ITEM('color',(#535543),#393944); +#535543 = PRESENTATION_STYLE_ASSIGNMENT((#535544)); +#535544 = SURFACE_STYLE_USAGE(.BOTH.,#535545); +#535545 = SURFACE_SIDE_STYLE('',(#535546)); +#535546 = SURFACE_STYLE_FILL_AREA(#535547); +#535547 = FILL_AREA_STYLE('',(#535548)); +#535548 = FILL_AREA_STYLE_COLOUR('',#533245); +#535549 = STYLED_ITEM('color',(#535550),#394036); +#535550 = PRESENTATION_STYLE_ASSIGNMENT((#535551)); +#535551 = SURFACE_STYLE_USAGE(.BOTH.,#535552); +#535552 = SURFACE_SIDE_STYLE('',(#535553)); +#535553 = SURFACE_STYLE_FILL_AREA(#535554); +#535554 = FILL_AREA_STYLE('',(#535555)); +#535555 = FILL_AREA_STYLE_COLOUR('',#533245); +#535556 = STYLED_ITEM('color',(#535557),#394326); +#535557 = PRESENTATION_STYLE_ASSIGNMENT((#535558)); +#535558 = SURFACE_STYLE_USAGE(.BOTH.,#535559); +#535559 = SURFACE_SIDE_STYLE('',(#535560)); +#535560 = SURFACE_STYLE_FILL_AREA(#535561); +#535561 = FILL_AREA_STYLE('',(#535562)); +#535562 = FILL_AREA_STYLE_COLOUR('',#533245); +#535563 = STYLED_ITEM('color',(#535564),#394616); +#535564 = PRESENTATION_STYLE_ASSIGNMENT((#535565)); +#535565 = SURFACE_STYLE_USAGE(.BOTH.,#535566); +#535566 = SURFACE_SIDE_STYLE('',(#535567)); +#535567 = SURFACE_STYLE_FILL_AREA(#535568); +#535568 = FILL_AREA_STYLE('',(#535569)); +#535569 = FILL_AREA_STYLE_COLOUR('',#533245); +#535570 = STYLED_ITEM('color',(#535571),#394906); +#535571 = PRESENTATION_STYLE_ASSIGNMENT((#535572)); +#535572 = SURFACE_STYLE_USAGE(.BOTH.,#535573); +#535573 = SURFACE_SIDE_STYLE('',(#535574)); +#535574 = SURFACE_STYLE_FILL_AREA(#535575); +#535575 = FILL_AREA_STYLE('',(#535576)); +#535576 = FILL_AREA_STYLE_COLOUR('',#533245); +#535577 = STYLED_ITEM('color',(#535578),#395196); +#535578 = PRESENTATION_STYLE_ASSIGNMENT((#535579)); +#535579 = SURFACE_STYLE_USAGE(.BOTH.,#535580); +#535580 = SURFACE_SIDE_STYLE('',(#535581)); +#535581 = SURFACE_STYLE_FILL_AREA(#535582); +#535582 = FILL_AREA_STYLE('',(#535583)); +#535583 = FILL_AREA_STYLE_COLOUR('',#533245); +#535584 = STYLED_ITEM('color',(#535585),#395486); +#535585 = PRESENTATION_STYLE_ASSIGNMENT((#535586)); +#535586 = SURFACE_STYLE_USAGE(.BOTH.,#535587); +#535587 = SURFACE_SIDE_STYLE('',(#535588)); +#535588 = SURFACE_STYLE_FILL_AREA(#535589); +#535589 = FILL_AREA_STYLE('',(#535590)); +#535590 = FILL_AREA_STYLE_COLOUR('',#533245); +#535591 = STYLED_ITEM('color',(#535592),#395776); +#535592 = PRESENTATION_STYLE_ASSIGNMENT((#535593)); +#535593 = SURFACE_STYLE_USAGE(.BOTH.,#535594); +#535594 = SURFACE_SIDE_STYLE('',(#535595)); +#535595 = SURFACE_STYLE_FILL_AREA(#535596); +#535596 = FILL_AREA_STYLE('',(#535597)); +#535597 = FILL_AREA_STYLE_COLOUR('',#533245); +#535598 = STYLED_ITEM('color',(#535599),#396066); +#535599 = PRESENTATION_STYLE_ASSIGNMENT((#535600)); +#535600 = SURFACE_STYLE_USAGE(.BOTH.,#535601); +#535601 = SURFACE_SIDE_STYLE('',(#535602)); +#535602 = SURFACE_STYLE_FILL_AREA(#535603); +#535603 = FILL_AREA_STYLE('',(#535604)); +#535604 = FILL_AREA_STYLE_COLOUR('',#533245); +#535605 = STYLED_ITEM('color',(#535606),#396356); +#535606 = PRESENTATION_STYLE_ASSIGNMENT((#535607)); +#535607 = SURFACE_STYLE_USAGE(.BOTH.,#535608); +#535608 = SURFACE_SIDE_STYLE('',(#535609)); +#535609 = SURFACE_STYLE_FILL_AREA(#535610); +#535610 = FILL_AREA_STYLE('',(#535611)); +#535611 = FILL_AREA_STYLE_COLOUR('',#533245); +#535612 = STYLED_ITEM('color',(#535613),#396646); +#535613 = PRESENTATION_STYLE_ASSIGNMENT((#535614)); +#535614 = SURFACE_STYLE_USAGE(.BOTH.,#535615); +#535615 = SURFACE_SIDE_STYLE('',(#535616)); +#535616 = SURFACE_STYLE_FILL_AREA(#535617); +#535617 = FILL_AREA_STYLE('',(#535618)); +#535618 = FILL_AREA_STYLE_COLOUR('',#533245); +#535619 = STYLED_ITEM('color',(#535620),#396936); +#535620 = PRESENTATION_STYLE_ASSIGNMENT((#535621)); +#535621 = SURFACE_STYLE_USAGE(.BOTH.,#535622); +#535622 = SURFACE_SIDE_STYLE('',(#535623)); +#535623 = SURFACE_STYLE_FILL_AREA(#535624); +#535624 = FILL_AREA_STYLE('',(#535625)); +#535625 = FILL_AREA_STYLE_COLOUR('',#533245); +#535626 = STYLED_ITEM('color',(#535627),#397226); +#535627 = PRESENTATION_STYLE_ASSIGNMENT((#535628)); +#535628 = SURFACE_STYLE_USAGE(.BOTH.,#535629); +#535629 = SURFACE_SIDE_STYLE('',(#535630)); +#535630 = SURFACE_STYLE_FILL_AREA(#535631); +#535631 = FILL_AREA_STYLE('',(#535632)); +#535632 = FILL_AREA_STYLE_COLOUR('',#533245); +#535633 = STYLED_ITEM('color',(#535634),#397516); +#535634 = PRESENTATION_STYLE_ASSIGNMENT((#535635)); +#535635 = SURFACE_STYLE_USAGE(.BOTH.,#535636); +#535636 = SURFACE_SIDE_STYLE('',(#535637)); +#535637 = SURFACE_STYLE_FILL_AREA(#535638); +#535638 = FILL_AREA_STYLE('',(#535639)); +#535639 = FILL_AREA_STYLE_COLOUR('',#533245); +#535640 = STYLED_ITEM('color',(#535641),#397806); +#535641 = PRESENTATION_STYLE_ASSIGNMENT((#535642)); +#535642 = SURFACE_STYLE_USAGE(.BOTH.,#535643); +#535643 = SURFACE_SIDE_STYLE('',(#535644)); +#535644 = SURFACE_STYLE_FILL_AREA(#535645); +#535645 = FILL_AREA_STYLE('',(#535646)); +#535646 = FILL_AREA_STYLE_COLOUR('',#533245); +#535647 = STYLED_ITEM('color',(#535648),#398096); +#535648 = PRESENTATION_STYLE_ASSIGNMENT((#535649)); +#535649 = SURFACE_STYLE_USAGE(.BOTH.,#535650); +#535650 = SURFACE_SIDE_STYLE('',(#535651)); +#535651 = SURFACE_STYLE_FILL_AREA(#535652); +#535652 = FILL_AREA_STYLE('',(#535653)); +#535653 = FILL_AREA_STYLE_COLOUR('',#533245); +#535654 = STYLED_ITEM('color',(#535655),#398386); +#535655 = PRESENTATION_STYLE_ASSIGNMENT((#535656)); +#535656 = SURFACE_STYLE_USAGE(.BOTH.,#535657); +#535657 = SURFACE_SIDE_STYLE('',(#535658)); +#535658 = SURFACE_STYLE_FILL_AREA(#535659); +#535659 = FILL_AREA_STYLE('',(#535660)); +#535660 = FILL_AREA_STYLE_COLOUR('',#533245); +#535661 = STYLED_ITEM('color',(#535662),#398579); +#535662 = PRESENTATION_STYLE_ASSIGNMENT((#535663)); +#535663 = SURFACE_STYLE_USAGE(.BOTH.,#535664); +#535664 = SURFACE_SIDE_STYLE('',(#535665)); +#535665 = SURFACE_STYLE_FILL_AREA(#535666); +#535666 = FILL_AREA_STYLE('',(#535667)); +#535667 = FILL_AREA_STYLE_COLOUR('',#533245); +#535668 = STYLED_ITEM('color',(#535669),#398772); +#535669 = PRESENTATION_STYLE_ASSIGNMENT((#535670)); +#535670 = SURFACE_STYLE_USAGE(.BOTH.,#535671); +#535671 = SURFACE_SIDE_STYLE('',(#535672)); +#535672 = SURFACE_STYLE_FILL_AREA(#535673); +#535673 = FILL_AREA_STYLE('',(#535674)); +#535674 = FILL_AREA_STYLE_COLOUR('',#533245); +#535675 = STYLED_ITEM('color',(#535676),#398864); +#535676 = PRESENTATION_STYLE_ASSIGNMENT((#535677)); +#535677 = SURFACE_STYLE_USAGE(.BOTH.,#535678); +#535678 = SURFACE_SIDE_STYLE('',(#535679)); +#535679 = SURFACE_STYLE_FILL_AREA(#535680); +#535680 = FILL_AREA_STYLE('',(#535681)); +#535681 = FILL_AREA_STYLE_COLOUR('',#533245); +#535682 = STYLED_ITEM('color',(#535683),#399154); +#535683 = PRESENTATION_STYLE_ASSIGNMENT((#535684)); +#535684 = SURFACE_STYLE_USAGE(.BOTH.,#535685); +#535685 = SURFACE_SIDE_STYLE('',(#535686)); +#535686 = SURFACE_STYLE_FILL_AREA(#535687); +#535687 = FILL_AREA_STYLE('',(#535688)); +#535688 = FILL_AREA_STYLE_COLOUR('',#533245); +#535689 = STYLED_ITEM('color',(#535690),#399444); +#535690 = PRESENTATION_STYLE_ASSIGNMENT((#535691)); +#535691 = SURFACE_STYLE_USAGE(.BOTH.,#535692); +#535692 = SURFACE_SIDE_STYLE('',(#535693)); +#535693 = SURFACE_STYLE_FILL_AREA(#535694); +#535694 = FILL_AREA_STYLE('',(#535695)); +#535695 = FILL_AREA_STYLE_COLOUR('',#533245); +#535696 = STYLED_ITEM('color',(#535697),#399734); +#535697 = PRESENTATION_STYLE_ASSIGNMENT((#535698)); +#535698 = SURFACE_STYLE_USAGE(.BOTH.,#535699); +#535699 = SURFACE_SIDE_STYLE('',(#535700)); +#535700 = SURFACE_STYLE_FILL_AREA(#535701); +#535701 = FILL_AREA_STYLE('',(#535702)); +#535702 = FILL_AREA_STYLE_COLOUR('',#533245); +#535703 = STYLED_ITEM('color',(#535704),#400024); +#535704 = PRESENTATION_STYLE_ASSIGNMENT((#535705)); +#535705 = SURFACE_STYLE_USAGE(.BOTH.,#535706); +#535706 = SURFACE_SIDE_STYLE('',(#535707)); +#535707 = SURFACE_STYLE_FILL_AREA(#535708); +#535708 = FILL_AREA_STYLE('',(#535709)); +#535709 = FILL_AREA_STYLE_COLOUR('',#533245); +#535710 = STYLED_ITEM('color',(#535711),#400314); +#535711 = PRESENTATION_STYLE_ASSIGNMENT((#535712)); +#535712 = SURFACE_STYLE_USAGE(.BOTH.,#535713); +#535713 = SURFACE_SIDE_STYLE('',(#535714)); +#535714 = SURFACE_STYLE_FILL_AREA(#535715); +#535715 = FILL_AREA_STYLE('',(#535716)); +#535716 = FILL_AREA_STYLE_COLOUR('',#533245); +#535717 = STYLED_ITEM('color',(#535718),#400604); +#535718 = PRESENTATION_STYLE_ASSIGNMENT((#535719)); +#535719 = SURFACE_STYLE_USAGE(.BOTH.,#535720); +#535720 = SURFACE_SIDE_STYLE('',(#535721)); +#535721 = SURFACE_STYLE_FILL_AREA(#535722); +#535722 = FILL_AREA_STYLE('',(#535723)); +#535723 = FILL_AREA_STYLE_COLOUR('',#533245); +#535724 = STYLED_ITEM('color',(#535725),#400894); +#535725 = PRESENTATION_STYLE_ASSIGNMENT((#535726)); +#535726 = SURFACE_STYLE_USAGE(.BOTH.,#535727); +#535727 = SURFACE_SIDE_STYLE('',(#535728)); +#535728 = SURFACE_STYLE_FILL_AREA(#535729); +#535729 = FILL_AREA_STYLE('',(#535730)); +#535730 = FILL_AREA_STYLE_COLOUR('',#533245); +#535731 = STYLED_ITEM('color',(#535732),#401184); +#535732 = PRESENTATION_STYLE_ASSIGNMENT((#535733)); +#535733 = SURFACE_STYLE_USAGE(.BOTH.,#535734); +#535734 = SURFACE_SIDE_STYLE('',(#535735)); +#535735 = SURFACE_STYLE_FILL_AREA(#535736); +#535736 = FILL_AREA_STYLE('',(#535737)); +#535737 = FILL_AREA_STYLE_COLOUR('',#533245); +#535738 = STYLED_ITEM('color',(#535739),#401474); +#535739 = PRESENTATION_STYLE_ASSIGNMENT((#535740)); +#535740 = SURFACE_STYLE_USAGE(.BOTH.,#535741); +#535741 = SURFACE_SIDE_STYLE('',(#535742)); +#535742 = SURFACE_STYLE_FILL_AREA(#535743); +#535743 = FILL_AREA_STYLE('',(#535744)); +#535744 = FILL_AREA_STYLE_COLOUR('',#533245); +#535745 = STYLED_ITEM('color',(#535746),#401764); +#535746 = PRESENTATION_STYLE_ASSIGNMENT((#535747)); +#535747 = SURFACE_STYLE_USAGE(.BOTH.,#535748); +#535748 = SURFACE_SIDE_STYLE('',(#535749)); +#535749 = SURFACE_STYLE_FILL_AREA(#535750); +#535750 = FILL_AREA_STYLE('',(#535751)); +#535751 = FILL_AREA_STYLE_COLOUR('',#533245); +#535752 = STYLED_ITEM('color',(#535753),#402054); +#535753 = PRESENTATION_STYLE_ASSIGNMENT((#535754)); +#535754 = SURFACE_STYLE_USAGE(.BOTH.,#535755); +#535755 = SURFACE_SIDE_STYLE('',(#535756)); +#535756 = SURFACE_STYLE_FILL_AREA(#535757); +#535757 = FILL_AREA_STYLE('',(#535758)); +#535758 = FILL_AREA_STYLE_COLOUR('',#533245); +#535759 = STYLED_ITEM('color',(#535760),#402344); +#535760 = PRESENTATION_STYLE_ASSIGNMENT((#535761)); +#535761 = SURFACE_STYLE_USAGE(.BOTH.,#535762); +#535762 = SURFACE_SIDE_STYLE('',(#535763)); +#535763 = SURFACE_STYLE_FILL_AREA(#535764); +#535764 = FILL_AREA_STYLE('',(#535765)); +#535765 = FILL_AREA_STYLE_COLOUR('',#533245); +#535766 = STYLED_ITEM('color',(#535767),#402634); +#535767 = PRESENTATION_STYLE_ASSIGNMENT((#535768)); +#535768 = SURFACE_STYLE_USAGE(.BOTH.,#535769); +#535769 = SURFACE_SIDE_STYLE('',(#535770)); +#535770 = SURFACE_STYLE_FILL_AREA(#535771); +#535771 = FILL_AREA_STYLE('',(#535772)); +#535772 = FILL_AREA_STYLE_COLOUR('',#533245); +#535773 = STYLED_ITEM('color',(#535774),#402924); +#535774 = PRESENTATION_STYLE_ASSIGNMENT((#535775)); +#535775 = SURFACE_STYLE_USAGE(.BOTH.,#535776); +#535776 = SURFACE_SIDE_STYLE('',(#535777)); +#535777 = SURFACE_STYLE_FILL_AREA(#535778); +#535778 = FILL_AREA_STYLE('',(#535779)); +#535779 = FILL_AREA_STYLE_COLOUR('',#533245); +#535780 = STYLED_ITEM('color',(#535781),#403214); +#535781 = PRESENTATION_STYLE_ASSIGNMENT((#535782)); +#535782 = SURFACE_STYLE_USAGE(.BOTH.,#535783); +#535783 = SURFACE_SIDE_STYLE('',(#535784)); +#535784 = SURFACE_STYLE_FILL_AREA(#535785); +#535785 = FILL_AREA_STYLE('',(#535786)); +#535786 = FILL_AREA_STYLE_COLOUR('',#533245); +#535787 = STYLED_ITEM('color',(#535788),#403504); +#535788 = PRESENTATION_STYLE_ASSIGNMENT((#535789)); +#535789 = SURFACE_STYLE_USAGE(.BOTH.,#535790); +#535790 = SURFACE_SIDE_STYLE('',(#535791)); +#535791 = SURFACE_STYLE_FILL_AREA(#535792); +#535792 = FILL_AREA_STYLE('',(#535793)); +#535793 = FILL_AREA_STYLE_COLOUR('',#533245); +#535794 = STYLED_ITEM('color',(#535795),#403794); +#535795 = PRESENTATION_STYLE_ASSIGNMENT((#535796)); +#535796 = SURFACE_STYLE_USAGE(.BOTH.,#535797); +#535797 = SURFACE_SIDE_STYLE('',(#535798)); +#535798 = SURFACE_STYLE_FILL_AREA(#535799); +#535799 = FILL_AREA_STYLE('',(#535800)); +#535800 = FILL_AREA_STYLE_COLOUR('',#533245); +#535801 = STYLED_ITEM('color',(#535802),#404084); +#535802 = PRESENTATION_STYLE_ASSIGNMENT((#535803)); +#535803 = SURFACE_STYLE_USAGE(.BOTH.,#535804); +#535804 = SURFACE_SIDE_STYLE('',(#535805)); +#535805 = SURFACE_STYLE_FILL_AREA(#535806); +#535806 = FILL_AREA_STYLE('',(#535807)); +#535807 = FILL_AREA_STYLE_COLOUR('',#533245); +#535808 = STYLED_ITEM('color',(#535809),#404374); +#535809 = PRESENTATION_STYLE_ASSIGNMENT((#535810)); +#535810 = SURFACE_STYLE_USAGE(.BOTH.,#535811); +#535811 = SURFACE_SIDE_STYLE('',(#535812)); +#535812 = SURFACE_STYLE_FILL_AREA(#535813); +#535813 = FILL_AREA_STYLE('',(#535814)); +#535814 = FILL_AREA_STYLE_COLOUR('',#533245); +#535815 = STYLED_ITEM('color',(#535816),#404664); +#535816 = PRESENTATION_STYLE_ASSIGNMENT((#535817)); +#535817 = SURFACE_STYLE_USAGE(.BOTH.,#535818); +#535818 = SURFACE_SIDE_STYLE('',(#535819)); +#535819 = SURFACE_STYLE_FILL_AREA(#535820); +#535820 = FILL_AREA_STYLE('',(#535821)); +#535821 = FILL_AREA_STYLE_COLOUR('',#533245); +#535822 = STYLED_ITEM('color',(#535823),#407540); +#535823 = PRESENTATION_STYLE_ASSIGNMENT((#535824)); +#535824 = SURFACE_STYLE_USAGE(.BOTH.,#535825); +#535825 = SURFACE_SIDE_STYLE('',(#535826)); +#535826 = SURFACE_STYLE_FILL_AREA(#535827); +#535827 = FILL_AREA_STYLE('',(#535828)); +#535828 = FILL_AREA_STYLE_COLOUR('',#533245); +#535829 = STYLED_ITEM('color',(#535830),#407632); +#535830 = PRESENTATION_STYLE_ASSIGNMENT((#535831)); +#535831 = SURFACE_STYLE_USAGE(.BOTH.,#535832); +#535832 = SURFACE_SIDE_STYLE('',(#535833)); +#535833 = SURFACE_STYLE_FILL_AREA(#535834); +#535834 = FILL_AREA_STYLE('',(#535835)); +#535835 = FILL_AREA_STYLE_COLOUR('',#533245); +#535836 = STYLED_ITEM('color',(#535837),#407724); +#535837 = PRESENTATION_STYLE_ASSIGNMENT((#535838)); +#535838 = SURFACE_STYLE_USAGE(.BOTH.,#535839); +#535839 = SURFACE_SIDE_STYLE('',(#535840)); +#535840 = SURFACE_STYLE_FILL_AREA(#535841); +#535841 = FILL_AREA_STYLE('',(#535842)); +#535842 = FILL_AREA_STYLE_COLOUR('',#533245); +#535843 = STYLED_ITEM('color',(#535844),#407816); +#535844 = PRESENTATION_STYLE_ASSIGNMENT((#535845)); +#535845 = SURFACE_STYLE_USAGE(.BOTH.,#535846); +#535846 = SURFACE_SIDE_STYLE('',(#535847)); +#535847 = SURFACE_STYLE_FILL_AREA(#535848); +#535848 = FILL_AREA_STYLE('',(#535849)); +#535849 = FILL_AREA_STYLE_COLOUR('',#533245); +#535850 = STYLED_ITEM('color',(#535851),#407908); +#535851 = PRESENTATION_STYLE_ASSIGNMENT((#535852)); +#535852 = SURFACE_STYLE_USAGE(.BOTH.,#535853); +#535853 = SURFACE_SIDE_STYLE('',(#535854)); +#535854 = SURFACE_STYLE_FILL_AREA(#535855); +#535855 = FILL_AREA_STYLE('',(#535856)); +#535856 = FILL_AREA_STYLE_COLOUR('',#533245); +#535857 = STYLED_ITEM('color',(#535858),#408000); +#535858 = PRESENTATION_STYLE_ASSIGNMENT((#535859)); +#535859 = SURFACE_STYLE_USAGE(.BOTH.,#535860); +#535860 = SURFACE_SIDE_STYLE('',(#535861)); +#535861 = SURFACE_STYLE_FILL_AREA(#535862); +#535862 = FILL_AREA_STYLE('',(#535863)); +#535863 = FILL_AREA_STYLE_COLOUR('',#533245); +#535864 = STYLED_ITEM('color',(#535865),#408092); +#535865 = PRESENTATION_STYLE_ASSIGNMENT((#535866)); +#535866 = SURFACE_STYLE_USAGE(.BOTH.,#535867); +#535867 = SURFACE_SIDE_STYLE('',(#535868)); +#535868 = SURFACE_STYLE_FILL_AREA(#535869); +#535869 = FILL_AREA_STYLE('',(#535870)); +#535870 = FILL_AREA_STYLE_COLOUR('',#533245); +#535871 = STYLED_ITEM('color',(#535872),#408382); +#535872 = PRESENTATION_STYLE_ASSIGNMENT((#535873)); +#535873 = SURFACE_STYLE_USAGE(.BOTH.,#535874); +#535874 = SURFACE_SIDE_STYLE('',(#535875)); +#535875 = SURFACE_STYLE_FILL_AREA(#535876); +#535876 = FILL_AREA_STYLE('',(#535877)); +#535877 = FILL_AREA_STYLE_COLOUR('',#533245); +#535878 = STYLED_ITEM('color',(#535879),#408672); +#535879 = PRESENTATION_STYLE_ASSIGNMENT((#535880)); +#535880 = SURFACE_STYLE_USAGE(.BOTH.,#535881); +#535881 = SURFACE_SIDE_STYLE('',(#535882)); +#535882 = SURFACE_STYLE_FILL_AREA(#535883); +#535883 = FILL_AREA_STYLE('',(#535884)); +#535884 = FILL_AREA_STYLE_COLOUR('',#533245); +#535885 = STYLED_ITEM('color',(#535886),#408962); +#535886 = PRESENTATION_STYLE_ASSIGNMENT((#535887)); +#535887 = SURFACE_STYLE_USAGE(.BOTH.,#535888); +#535888 = SURFACE_SIDE_STYLE('',(#535889)); +#535889 = SURFACE_STYLE_FILL_AREA(#535890); +#535890 = FILL_AREA_STYLE('',(#535891)); +#535891 = FILL_AREA_STYLE_COLOUR('',#533245); +#535892 = STYLED_ITEM('color',(#535893),#409252); +#535893 = PRESENTATION_STYLE_ASSIGNMENT((#535894)); +#535894 = SURFACE_STYLE_USAGE(.BOTH.,#535895); +#535895 = SURFACE_SIDE_STYLE('',(#535896)); +#535896 = SURFACE_STYLE_FILL_AREA(#535897); +#535897 = FILL_AREA_STYLE('',(#535898)); +#535898 = FILL_AREA_STYLE_COLOUR('',#533245); +#535899 = STYLED_ITEM('color',(#535900),#409542); +#535900 = PRESENTATION_STYLE_ASSIGNMENT((#535901)); +#535901 = SURFACE_STYLE_USAGE(.BOTH.,#535902); +#535902 = SURFACE_SIDE_STYLE('',(#535903)); +#535903 = SURFACE_STYLE_FILL_AREA(#535904); +#535904 = FILL_AREA_STYLE('',(#535905)); +#535905 = FILL_AREA_STYLE_COLOUR('',#533245); +#535906 = STYLED_ITEM('color',(#535907),#409832); +#535907 = PRESENTATION_STYLE_ASSIGNMENT((#535908)); +#535908 = SURFACE_STYLE_USAGE(.BOTH.,#535909); +#535909 = SURFACE_SIDE_STYLE('',(#535910)); +#535910 = SURFACE_STYLE_FILL_AREA(#535911); +#535911 = FILL_AREA_STYLE('',(#535912)); +#535912 = FILL_AREA_STYLE_COLOUR('',#533245); +#535913 = STYLED_ITEM('color',(#535914),#410122); +#535914 = PRESENTATION_STYLE_ASSIGNMENT((#535915)); +#535915 = SURFACE_STYLE_USAGE(.BOTH.,#535916); +#535916 = SURFACE_SIDE_STYLE('',(#535917)); +#535917 = SURFACE_STYLE_FILL_AREA(#535918); +#535918 = FILL_AREA_STYLE('',(#535919)); +#535919 = FILL_AREA_STYLE_COLOUR('',#533245); +#535920 = STYLED_ITEM('color',(#535921),#410412); +#535921 = PRESENTATION_STYLE_ASSIGNMENT((#535922)); +#535922 = SURFACE_STYLE_USAGE(.BOTH.,#535923); +#535923 = SURFACE_SIDE_STYLE('',(#535924)); +#535924 = SURFACE_STYLE_FILL_AREA(#535925); +#535925 = FILL_AREA_STYLE('',(#535926)); +#535926 = FILL_AREA_STYLE_COLOUR('',#533245); +#535927 = STYLED_ITEM('color',(#535928),#410702); +#535928 = PRESENTATION_STYLE_ASSIGNMENT((#535929)); +#535929 = SURFACE_STYLE_USAGE(.BOTH.,#535930); +#535930 = SURFACE_SIDE_STYLE('',(#535931)); +#535931 = SURFACE_STYLE_FILL_AREA(#535932); +#535932 = FILL_AREA_STYLE('',(#535933)); +#535933 = FILL_AREA_STYLE_COLOUR('',#533245); +#535934 = STYLED_ITEM('color',(#535935),#410992); +#535935 = PRESENTATION_STYLE_ASSIGNMENT((#535936)); +#535936 = SURFACE_STYLE_USAGE(.BOTH.,#535937); +#535937 = SURFACE_SIDE_STYLE('',(#535938)); +#535938 = SURFACE_STYLE_FILL_AREA(#535939); +#535939 = FILL_AREA_STYLE('',(#535940)); +#535940 = FILL_AREA_STYLE_COLOUR('',#533245); +#535941 = STYLED_ITEM('color',(#535942),#411321); +#535942 = PRESENTATION_STYLE_ASSIGNMENT((#535943)); +#535943 = SURFACE_STYLE_USAGE(.BOTH.,#535944); +#535944 = SURFACE_SIDE_STYLE('',(#535945)); +#535945 = SURFACE_STYLE_FILL_AREA(#535946); +#535946 = FILL_AREA_STYLE('',(#535947)); +#535947 = FILL_AREA_STYLE_COLOUR('',#533245); +#535948 = STYLED_ITEM('color',(#535949),#411650); +#535949 = PRESENTATION_STYLE_ASSIGNMENT((#535950)); +#535950 = SURFACE_STYLE_USAGE(.BOTH.,#535951); +#535951 = SURFACE_SIDE_STYLE('',(#535952)); +#535952 = SURFACE_STYLE_FILL_AREA(#535953); +#535953 = FILL_AREA_STYLE('',(#535954)); +#535954 = FILL_AREA_STYLE_COLOUR('',#533245); +#535955 = STYLED_ITEM('color',(#535956),#411742); +#535956 = PRESENTATION_STYLE_ASSIGNMENT((#535957)); +#535957 = SURFACE_STYLE_USAGE(.BOTH.,#535958); +#535958 = SURFACE_SIDE_STYLE('',(#535959)); +#535959 = SURFACE_STYLE_FILL_AREA(#535960); +#535960 = FILL_AREA_STYLE('',(#535961)); +#535961 = FILL_AREA_STYLE_COLOUR('',#533245); +#535962 = STYLED_ITEM('color',(#535963),#412032); +#535963 = PRESENTATION_STYLE_ASSIGNMENT((#535964)); +#535964 = SURFACE_STYLE_USAGE(.BOTH.,#535965); +#535965 = SURFACE_SIDE_STYLE('',(#535966)); +#535966 = SURFACE_STYLE_FILL_AREA(#535967); +#535967 = FILL_AREA_STYLE('',(#535968)); +#535968 = FILL_AREA_STYLE_COLOUR('',#533245); +#535969 = STYLED_ITEM('color',(#535970),#412322); +#535970 = PRESENTATION_STYLE_ASSIGNMENT((#535971)); +#535971 = SURFACE_STYLE_USAGE(.BOTH.,#535972); +#535972 = SURFACE_SIDE_STYLE('',(#535973)); +#535973 = SURFACE_STYLE_FILL_AREA(#535974); +#535974 = FILL_AREA_STYLE('',(#535975)); +#535975 = FILL_AREA_STYLE_COLOUR('',#533245); +#535976 = STYLED_ITEM('color',(#535977),#412612); +#535977 = PRESENTATION_STYLE_ASSIGNMENT((#535978)); +#535978 = SURFACE_STYLE_USAGE(.BOTH.,#535979); +#535979 = SURFACE_SIDE_STYLE('',(#535980)); +#535980 = SURFACE_STYLE_FILL_AREA(#535981); +#535981 = FILL_AREA_STYLE('',(#535982)); +#535982 = FILL_AREA_STYLE_COLOUR('',#533245); +#535983 = STYLED_ITEM('color',(#535984),#412902); +#535984 = PRESENTATION_STYLE_ASSIGNMENT((#535985)); +#535985 = SURFACE_STYLE_USAGE(.BOTH.,#535986); +#535986 = SURFACE_SIDE_STYLE('',(#535987)); +#535987 = SURFACE_STYLE_FILL_AREA(#535988); +#535988 = FILL_AREA_STYLE('',(#535989)); +#535989 = FILL_AREA_STYLE_COLOUR('',#533245); +#535990 = STYLED_ITEM('color',(#535991),#413192); +#535991 = PRESENTATION_STYLE_ASSIGNMENT((#535992)); +#535992 = SURFACE_STYLE_USAGE(.BOTH.,#535993); +#535993 = SURFACE_SIDE_STYLE('',(#535994)); +#535994 = SURFACE_STYLE_FILL_AREA(#535995); +#535995 = FILL_AREA_STYLE('',(#535996)); +#535996 = FILL_AREA_STYLE_COLOUR('',#533245); +#535997 = STYLED_ITEM('color',(#535998),#413482); +#535998 = PRESENTATION_STYLE_ASSIGNMENT((#535999)); +#535999 = SURFACE_STYLE_USAGE(.BOTH.,#536000); +#536000 = SURFACE_SIDE_STYLE('',(#536001)); +#536001 = SURFACE_STYLE_FILL_AREA(#536002); +#536002 = FILL_AREA_STYLE('',(#536003)); +#536003 = FILL_AREA_STYLE_COLOUR('',#533245); +#536004 = STYLED_ITEM('color',(#536005),#413772); +#536005 = PRESENTATION_STYLE_ASSIGNMENT((#536006)); +#536006 = SURFACE_STYLE_USAGE(.BOTH.,#536007); +#536007 = SURFACE_SIDE_STYLE('',(#536008)); +#536008 = SURFACE_STYLE_FILL_AREA(#536009); +#536009 = FILL_AREA_STYLE('',(#536010)); +#536010 = FILL_AREA_STYLE_COLOUR('',#533245); +#536011 = STYLED_ITEM('color',(#536012),#414062); +#536012 = PRESENTATION_STYLE_ASSIGNMENT((#536013)); +#536013 = SURFACE_STYLE_USAGE(.BOTH.,#536014); +#536014 = SURFACE_SIDE_STYLE('',(#536015)); +#536015 = SURFACE_STYLE_FILL_AREA(#536016); +#536016 = FILL_AREA_STYLE('',(#536017)); +#536017 = FILL_AREA_STYLE_COLOUR('',#533245); +#536018 = STYLED_ITEM('color',(#536019),#414352); +#536019 = PRESENTATION_STYLE_ASSIGNMENT((#536020)); +#536020 = SURFACE_STYLE_USAGE(.BOTH.,#536021); +#536021 = SURFACE_SIDE_STYLE('',(#536022)); +#536022 = SURFACE_STYLE_FILL_AREA(#536023); +#536023 = FILL_AREA_STYLE('',(#536024)); +#536024 = FILL_AREA_STYLE_COLOUR('',#533245); +#536025 = STYLED_ITEM('color',(#536026),#414642); +#536026 = PRESENTATION_STYLE_ASSIGNMENT((#536027)); +#536027 = SURFACE_STYLE_USAGE(.BOTH.,#536028); +#536028 = SURFACE_SIDE_STYLE('',(#536029)); +#536029 = SURFACE_STYLE_FILL_AREA(#536030); +#536030 = FILL_AREA_STYLE('',(#536031)); +#536031 = FILL_AREA_STYLE_COLOUR('',#533245); +#536032 = STYLED_ITEM('color',(#536033),#414932); +#536033 = PRESENTATION_STYLE_ASSIGNMENT((#536034)); +#536034 = SURFACE_STYLE_USAGE(.BOTH.,#536035); +#536035 = SURFACE_SIDE_STYLE('',(#536036)); +#536036 = SURFACE_STYLE_FILL_AREA(#536037); +#536037 = FILL_AREA_STYLE('',(#536038)); +#536038 = FILL_AREA_STYLE_COLOUR('',#533245); +#536039 = STYLED_ITEM('color',(#536040),#415222); +#536040 = PRESENTATION_STYLE_ASSIGNMENT((#536041)); +#536041 = SURFACE_STYLE_USAGE(.BOTH.,#536042); +#536042 = SURFACE_SIDE_STYLE('',(#536043)); +#536043 = SURFACE_STYLE_FILL_AREA(#536044); +#536044 = FILL_AREA_STYLE('',(#536045)); +#536045 = FILL_AREA_STYLE_COLOUR('',#533245); +#536046 = STYLED_ITEM('color',(#536047),#415512); +#536047 = PRESENTATION_STYLE_ASSIGNMENT((#536048)); +#536048 = SURFACE_STYLE_USAGE(.BOTH.,#536049); +#536049 = SURFACE_SIDE_STYLE('',(#536050)); +#536050 = SURFACE_STYLE_FILL_AREA(#536051); +#536051 = FILL_AREA_STYLE('',(#536052)); +#536052 = FILL_AREA_STYLE_COLOUR('',#533245); +#536053 = STYLED_ITEM('color',(#536054),#415802); +#536054 = PRESENTATION_STYLE_ASSIGNMENT((#536055)); +#536055 = SURFACE_STYLE_USAGE(.BOTH.,#536056); +#536056 = SURFACE_SIDE_STYLE('',(#536057)); +#536057 = SURFACE_STYLE_FILL_AREA(#536058); +#536058 = FILL_AREA_STYLE('',(#536059)); +#536059 = FILL_AREA_STYLE_COLOUR('',#533245); +#536060 = STYLED_ITEM('color',(#536061),#416092); +#536061 = PRESENTATION_STYLE_ASSIGNMENT((#536062)); +#536062 = SURFACE_STYLE_USAGE(.BOTH.,#536063); +#536063 = SURFACE_SIDE_STYLE('',(#536064)); +#536064 = SURFACE_STYLE_FILL_AREA(#536065); +#536065 = FILL_AREA_STYLE('',(#536066)); +#536066 = FILL_AREA_STYLE_COLOUR('',#533245); +#536067 = STYLED_ITEM('color',(#536068),#416382); +#536068 = PRESENTATION_STYLE_ASSIGNMENT((#536069)); +#536069 = SURFACE_STYLE_USAGE(.BOTH.,#536070); +#536070 = SURFACE_SIDE_STYLE('',(#536071)); +#536071 = SURFACE_STYLE_FILL_AREA(#536072); +#536072 = FILL_AREA_STYLE('',(#536073)); +#536073 = FILL_AREA_STYLE_COLOUR('',#533245); +#536074 = STYLED_ITEM('color',(#536075),#416672); +#536075 = PRESENTATION_STYLE_ASSIGNMENT((#536076)); +#536076 = SURFACE_STYLE_USAGE(.BOTH.,#536077); +#536077 = SURFACE_SIDE_STYLE('',(#536078)); +#536078 = SURFACE_STYLE_FILL_AREA(#536079); +#536079 = FILL_AREA_STYLE('',(#536080)); +#536080 = FILL_AREA_STYLE_COLOUR('',#533245); +#536081 = STYLED_ITEM('color',(#536082),#416962); +#536082 = PRESENTATION_STYLE_ASSIGNMENT((#536083)); +#536083 = SURFACE_STYLE_USAGE(.BOTH.,#536084); +#536084 = SURFACE_SIDE_STYLE('',(#536085)); +#536085 = SURFACE_STYLE_FILL_AREA(#536086); +#536086 = FILL_AREA_STYLE('',(#536087)); +#536087 = FILL_AREA_STYLE_COLOUR('',#533245); +#536088 = STYLED_ITEM('color',(#536089),#417252); +#536089 = PRESENTATION_STYLE_ASSIGNMENT((#536090)); +#536090 = SURFACE_STYLE_USAGE(.BOTH.,#536091); +#536091 = SURFACE_SIDE_STYLE('',(#536092)); +#536092 = SURFACE_STYLE_FILL_AREA(#536093); +#536093 = FILL_AREA_STYLE('',(#536094)); +#536094 = FILL_AREA_STYLE_COLOUR('',#533245); +#536095 = STYLED_ITEM('color',(#536096),#417542); +#536096 = PRESENTATION_STYLE_ASSIGNMENT((#536097)); +#536097 = SURFACE_STYLE_USAGE(.BOTH.,#536098); +#536098 = SURFACE_SIDE_STYLE('',(#536099)); +#536099 = SURFACE_STYLE_FILL_AREA(#536100); +#536100 = FILL_AREA_STYLE('',(#536101)); +#536101 = FILL_AREA_STYLE_COLOUR('',#533245); +#536102 = STYLED_ITEM('color',(#536103),#417634); +#536103 = PRESENTATION_STYLE_ASSIGNMENT((#536104)); +#536104 = SURFACE_STYLE_USAGE(.BOTH.,#536105); +#536105 = SURFACE_SIDE_STYLE('',(#536106)); +#536106 = SURFACE_STYLE_FILL_AREA(#536107); +#536107 = FILL_AREA_STYLE('',(#536108)); +#536108 = FILL_AREA_STYLE_COLOUR('',#533245); +#536109 = STYLED_ITEM('color',(#536110),#417726); +#536110 = PRESENTATION_STYLE_ASSIGNMENT((#536111)); +#536111 = SURFACE_STYLE_USAGE(.BOTH.,#536112); +#536112 = SURFACE_SIDE_STYLE('',(#536113)); +#536113 = SURFACE_STYLE_FILL_AREA(#536114); +#536114 = FILL_AREA_STYLE('',(#536115)); +#536115 = FILL_AREA_STYLE_COLOUR('',#533245); +#536116 = STYLED_ITEM('color',(#536117),#417818); +#536117 = PRESENTATION_STYLE_ASSIGNMENT((#536118)); +#536118 = SURFACE_STYLE_USAGE(.BOTH.,#536119); +#536119 = SURFACE_SIDE_STYLE('',(#536120)); +#536120 = SURFACE_STYLE_FILL_AREA(#536121); +#536121 = FILL_AREA_STYLE('',(#536122)); +#536122 = FILL_AREA_STYLE_COLOUR('',#533245); +#536123 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #536124,#536131,#536138,#536145,#536152,#536159,#536166,#536173, + #536180,#536187,#536194,#536201,#536208,#536215,#536222,#536229, + #536236,#536243,#536250,#536257,#536264,#536271,#536278,#536285, + #536292,#536299,#536306,#536313),#156452); +#536124 = STYLED_ITEM('color',(#536125),#155600); +#536125 = PRESENTATION_STYLE_ASSIGNMENT((#536126)); +#536126 = SURFACE_STYLE_USAGE(.BOTH.,#536127); +#536127 = SURFACE_SIDE_STYLE('',(#536128)); +#536128 = SURFACE_STYLE_FILL_AREA(#536129); +#536129 = FILL_AREA_STYLE('',(#536130)); +#536130 = FILL_AREA_STYLE_COLOUR('',#512538); +#536131 = STYLED_ITEM('color',(#536132),#155676); +#536132 = PRESENTATION_STYLE_ASSIGNMENT((#536133)); +#536133 = SURFACE_STYLE_USAGE(.BOTH.,#536134); +#536134 = SURFACE_SIDE_STYLE('',(#536135)); +#536135 = SURFACE_STYLE_FILL_AREA(#536136); +#536136 = FILL_AREA_STYLE('',(#536137)); +#536137 = FILL_AREA_STYLE_COLOUR('',#512538); +#536138 = STYLED_ITEM('color',(#536139),#155707); +#536139 = PRESENTATION_STYLE_ASSIGNMENT((#536140)); +#536140 = SURFACE_STYLE_USAGE(.BOTH.,#536141); +#536141 = SURFACE_SIDE_STYLE('',(#536142)); +#536142 = SURFACE_STYLE_FILL_AREA(#536143); +#536143 = FILL_AREA_STYLE('',(#536144)); +#536144 = FILL_AREA_STYLE_COLOUR('',#512538); +#536145 = STYLED_ITEM('color',(#536146),#155732); +#536146 = PRESENTATION_STYLE_ASSIGNMENT((#536147)); +#536147 = SURFACE_STYLE_USAGE(.BOTH.,#536148); +#536148 = SURFACE_SIDE_STYLE('',(#536149)); +#536149 = SURFACE_STYLE_FILL_AREA(#536150); +#536150 = FILL_AREA_STYLE('',(#536151)); +#536151 = FILL_AREA_STYLE_COLOUR('',#512538); +#536152 = STYLED_ITEM('color',(#536153),#155757); +#536153 = PRESENTATION_STYLE_ASSIGNMENT((#536154)); +#536154 = SURFACE_STYLE_USAGE(.BOTH.,#536155); +#536155 = SURFACE_SIDE_STYLE('',(#536156)); +#536156 = SURFACE_STYLE_FILL_AREA(#536157); +#536157 = FILL_AREA_STYLE('',(#536158)); +#536158 = FILL_AREA_STYLE_COLOUR('',#512538); +#536159 = STYLED_ITEM('color',(#536160),#155781); +#536160 = PRESENTATION_STYLE_ASSIGNMENT((#536161)); +#536161 = SURFACE_STYLE_USAGE(.BOTH.,#536162); +#536162 = SURFACE_SIDE_STYLE('',(#536163)); +#536163 = SURFACE_STYLE_FILL_AREA(#536164); +#536164 = FILL_AREA_STYLE('',(#536165)); +#536165 = FILL_AREA_STYLE_COLOUR('',#512538); +#536166 = STYLED_ITEM('color',(#536167),#155805); +#536167 = PRESENTATION_STYLE_ASSIGNMENT((#536168)); +#536168 = SURFACE_STYLE_USAGE(.BOTH.,#536169); +#536169 = SURFACE_SIDE_STYLE('',(#536170)); +#536170 = SURFACE_STYLE_FILL_AREA(#536171); +#536171 = FILL_AREA_STYLE('',(#536172)); +#536172 = FILL_AREA_STYLE_COLOUR('',#512538); +#536173 = STYLED_ITEM('color',(#536174),#155830); +#536174 = PRESENTATION_STYLE_ASSIGNMENT((#536175)); +#536175 = SURFACE_STYLE_USAGE(.BOTH.,#536176); +#536176 = SURFACE_SIDE_STYLE('',(#536177)); +#536177 = SURFACE_STYLE_FILL_AREA(#536178); +#536178 = FILL_AREA_STYLE('',(#536179)); +#536179 = FILL_AREA_STYLE_COLOUR('',#512538); +#536180 = STYLED_ITEM('color',(#536181),#155855); +#536181 = PRESENTATION_STYLE_ASSIGNMENT((#536182)); +#536182 = SURFACE_STYLE_USAGE(.BOTH.,#536183); +#536183 = SURFACE_SIDE_STYLE('',(#536184)); +#536184 = SURFACE_STYLE_FILL_AREA(#536185); +#536185 = FILL_AREA_STYLE('',(#536186)); +#536186 = FILL_AREA_STYLE_COLOUR('',#512538); +#536187 = STYLED_ITEM('color',(#536188),#155872); +#536188 = PRESENTATION_STYLE_ASSIGNMENT((#536189)); +#536189 = SURFACE_STYLE_USAGE(.BOTH.,#536190); +#536190 = SURFACE_SIDE_STYLE('',(#536191)); +#536191 = SURFACE_STYLE_FILL_AREA(#536192); +#536192 = FILL_AREA_STYLE('',(#536193)); +#536193 = FILL_AREA_STYLE_COLOUR('',#512538); +#536194 = STYLED_ITEM('color',(#536195),#155958); +#536195 = PRESENTATION_STYLE_ASSIGNMENT((#536196)); +#536196 = SURFACE_STYLE_USAGE(.BOTH.,#536197); +#536197 = SURFACE_SIDE_STYLE('',(#536198)); +#536198 = SURFACE_STYLE_FILL_AREA(#536199); +#536199 = FILL_AREA_STYLE('',(#536200)); +#536200 = FILL_AREA_STYLE_COLOUR('',#520918); +#536201 = STYLED_ITEM('color',(#536202),#155990); +#536202 = PRESENTATION_STYLE_ASSIGNMENT((#536203)); +#536203 = SURFACE_STYLE_USAGE(.BOTH.,#536204); +#536204 = SURFACE_SIDE_STYLE('',(#536205)); +#536205 = SURFACE_STYLE_FILL_AREA(#536206); +#536206 = FILL_AREA_STYLE('',(#536207)); +#536207 = FILL_AREA_STYLE_COLOUR('',#520918); +#536208 = STYLED_ITEM('color',(#536209),#156014); +#536209 = PRESENTATION_STYLE_ASSIGNMENT((#536210)); +#536210 = SURFACE_STYLE_USAGE(.BOTH.,#536211); +#536211 = SURFACE_SIDE_STYLE('',(#536212)); +#536212 = SURFACE_STYLE_FILL_AREA(#536213); +#536213 = FILL_AREA_STYLE('',(#536214)); +#536214 = FILL_AREA_STYLE_COLOUR('',#520918); +#536215 = STYLED_ITEM('color',(#536216),#156039); +#536216 = PRESENTATION_STYLE_ASSIGNMENT((#536217)); +#536217 = SURFACE_STYLE_USAGE(.BOTH.,#536218); +#536218 = SURFACE_SIDE_STYLE('',(#536219)); +#536219 = SURFACE_STYLE_FILL_AREA(#536220); +#536220 = FILL_AREA_STYLE('',(#536221)); +#536221 = FILL_AREA_STYLE_COLOUR('',#520918); +#536222 = STYLED_ITEM('color',(#536223),#156063); +#536223 = PRESENTATION_STYLE_ASSIGNMENT((#536224)); +#536224 = SURFACE_STYLE_USAGE(.BOTH.,#536225); +#536225 = SURFACE_SIDE_STYLE('',(#536226)); +#536226 = SURFACE_STYLE_FILL_AREA(#536227); +#536227 = FILL_AREA_STYLE('',(#536228)); +#536228 = FILL_AREA_STYLE_COLOUR('',#520918); +#536229 = STYLED_ITEM('color',(#536230),#156088); +#536230 = PRESENTATION_STYLE_ASSIGNMENT((#536231)); +#536231 = SURFACE_STYLE_USAGE(.BOTH.,#536232); +#536232 = SURFACE_SIDE_STYLE('',(#536233)); +#536233 = SURFACE_STYLE_FILL_AREA(#536234); +#536234 = FILL_AREA_STYLE('',(#536235)); +#536235 = FILL_AREA_STYLE_COLOUR('',#520918); +#536236 = STYLED_ITEM('color',(#536237),#156112); +#536237 = PRESENTATION_STYLE_ASSIGNMENT((#536238)); +#536238 = SURFACE_STYLE_USAGE(.BOTH.,#536239); +#536239 = SURFACE_SIDE_STYLE('',(#536240)); +#536240 = SURFACE_STYLE_FILL_AREA(#536241); +#536241 = FILL_AREA_STYLE('',(#536242)); +#536242 = FILL_AREA_STYLE_COLOUR('',#520918); +#536243 = STYLED_ITEM('color',(#536244),#156137); +#536244 = PRESENTATION_STYLE_ASSIGNMENT((#536245)); +#536245 = SURFACE_STYLE_USAGE(.BOTH.,#536246); +#536246 = SURFACE_SIDE_STYLE('',(#536247)); +#536247 = SURFACE_STYLE_FILL_AREA(#536248); +#536248 = FILL_AREA_STYLE('',(#536249)); +#536249 = FILL_AREA_STYLE_COLOUR('',#520918); +#536250 = STYLED_ITEM('color',(#536251),#156154); +#536251 = PRESENTATION_STYLE_ASSIGNMENT((#536252)); +#536252 = SURFACE_STYLE_USAGE(.BOTH.,#536253); +#536253 = SURFACE_SIDE_STYLE('',(#536254)); +#536254 = SURFACE_STYLE_FILL_AREA(#536255); +#536255 = FILL_AREA_STYLE('',(#536256)); +#536256 = FILL_AREA_STYLE_COLOUR('',#512538); +#536257 = STYLED_ITEM('color',(#536258),#156240); +#536258 = PRESENTATION_STYLE_ASSIGNMENT((#536259)); +#536259 = SURFACE_STYLE_USAGE(.BOTH.,#536260); +#536260 = SURFACE_SIDE_STYLE('',(#536261)); +#536261 = SURFACE_STYLE_FILL_AREA(#536262); +#536262 = FILL_AREA_STYLE('',(#536263)); +#536263 = FILL_AREA_STYLE_COLOUR('',#512538); +#536264 = STYLED_ITEM('color',(#536265),#156271); +#536265 = PRESENTATION_STYLE_ASSIGNMENT((#536266)); +#536266 = SURFACE_STYLE_USAGE(.BOTH.,#536267); +#536267 = SURFACE_SIDE_STYLE('',(#536268)); +#536268 = SURFACE_STYLE_FILL_AREA(#536269); +#536269 = FILL_AREA_STYLE('',(#536270)); +#536270 = FILL_AREA_STYLE_COLOUR('',#512538); +#536271 = STYLED_ITEM('color',(#536272),#156296); +#536272 = PRESENTATION_STYLE_ASSIGNMENT((#536273)); +#536273 = SURFACE_STYLE_USAGE(.BOTH.,#536274); +#536274 = SURFACE_SIDE_STYLE('',(#536275)); +#536275 = SURFACE_STYLE_FILL_AREA(#536276); +#536276 = FILL_AREA_STYLE('',(#536277)); +#536277 = FILL_AREA_STYLE_COLOUR('',#512538); +#536278 = STYLED_ITEM('color',(#536279),#156321); +#536279 = PRESENTATION_STYLE_ASSIGNMENT((#536280)); +#536280 = SURFACE_STYLE_USAGE(.BOTH.,#536281); +#536281 = SURFACE_SIDE_STYLE('',(#536282)); +#536282 = SURFACE_STYLE_FILL_AREA(#536283); +#536283 = FILL_AREA_STYLE('',(#536284)); +#536284 = FILL_AREA_STYLE_COLOUR('',#512538); +#536285 = STYLED_ITEM('color',(#536286),#156345); +#536286 = PRESENTATION_STYLE_ASSIGNMENT((#536287)); +#536287 = SURFACE_STYLE_USAGE(.BOTH.,#536288); +#536288 = SURFACE_SIDE_STYLE('',(#536289)); +#536289 = SURFACE_STYLE_FILL_AREA(#536290); +#536290 = FILL_AREA_STYLE('',(#536291)); +#536291 = FILL_AREA_STYLE_COLOUR('',#512538); +#536292 = STYLED_ITEM('color',(#536293),#156369); +#536293 = PRESENTATION_STYLE_ASSIGNMENT((#536294)); +#536294 = SURFACE_STYLE_USAGE(.BOTH.,#536295); +#536295 = SURFACE_SIDE_STYLE('',(#536296)); +#536296 = SURFACE_STYLE_FILL_AREA(#536297); +#536297 = FILL_AREA_STYLE('',(#536298)); +#536298 = FILL_AREA_STYLE_COLOUR('',#512538); +#536299 = STYLED_ITEM('color',(#536300),#156394); +#536300 = PRESENTATION_STYLE_ASSIGNMENT((#536301)); +#536301 = SURFACE_STYLE_USAGE(.BOTH.,#536302); +#536302 = SURFACE_SIDE_STYLE('',(#536303)); +#536303 = SURFACE_STYLE_FILL_AREA(#536304); +#536304 = FILL_AREA_STYLE('',(#536305)); +#536305 = FILL_AREA_STYLE_COLOUR('',#512538); +#536306 = STYLED_ITEM('color',(#536307),#156419); +#536307 = PRESENTATION_STYLE_ASSIGNMENT((#536308)); +#536308 = SURFACE_STYLE_USAGE(.BOTH.,#536309); +#536309 = SURFACE_SIDE_STYLE('',(#536310)); +#536310 = SURFACE_STYLE_FILL_AREA(#536311); +#536311 = FILL_AREA_STYLE('',(#536312)); +#536312 = FILL_AREA_STYLE_COLOUR('',#512538); +#536313 = STYLED_ITEM('color',(#536314),#156436); +#536314 = PRESENTATION_STYLE_ASSIGNMENT((#536315)); +#536315 = SURFACE_STYLE_USAGE(.BOTH.,#536316); +#536316 = SURFACE_SIDE_STYLE('',(#536317)); +#536317 = SURFACE_STYLE_FILL_AREA(#536318); +#536318 = FILL_AREA_STYLE('',(#536319)); +#536319 = FILL_AREA_STYLE_COLOUR('',#512538); +#536320 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #536321,#536328,#536335,#536342,#536349,#536356,#536363,#536370, + #536377,#536384,#536391,#536398,#536405,#536412,#536419,#536426, + #536433,#536440,#536447,#536454,#536461,#536468,#536475,#536482, + #536489,#536496,#536503,#536510,#536517,#536524,#536531,#536538, + #536545,#536552,#536559,#536566,#536573,#536580,#536587,#536594, + #536601,#536608,#536615,#536622,#536629,#536636,#536643,#536650, + #536657,#536664,#536671,#536678,#536685,#536692,#536699,#536706, + #536713,#536720,#536727,#536734,#536741,#536748,#536755,#536762, + #536769,#536776,#536783,#536790,#536797,#536804,#536811,#536818, + #536825,#536832,#536839,#536846,#536853,#536860),#169937); +#536321 = STYLED_ITEM('color',(#536322),#167756); +#536322 = PRESENTATION_STYLE_ASSIGNMENT((#536323)); +#536323 = SURFACE_STYLE_USAGE(.BOTH.,#536324); +#536324 = SURFACE_SIDE_STYLE('',(#536325)); +#536325 = SURFACE_STYLE_FILL_AREA(#536326); +#536326 = FILL_AREA_STYLE('',(#536327)); +#536327 = FILL_AREA_STYLE_COLOUR('',#512538); +#536328 = STYLED_ITEM('color',(#536329),#167796); +#536329 = PRESENTATION_STYLE_ASSIGNMENT((#536330)); +#536330 = SURFACE_STYLE_USAGE(.BOTH.,#536331); +#536331 = SURFACE_SIDE_STYLE('',(#536332)); +#536332 = SURFACE_STYLE_FILL_AREA(#536333); +#536333 = FILL_AREA_STYLE('',(#536334)); +#536334 = FILL_AREA_STYLE_COLOUR('',#512538); +#536335 = STYLED_ITEM('color',(#536336),#167827); +#536336 = PRESENTATION_STYLE_ASSIGNMENT((#536337)); +#536337 = SURFACE_STYLE_USAGE(.BOTH.,#536338); +#536338 = SURFACE_SIDE_STYLE('',(#536339)); +#536339 = SURFACE_STYLE_FILL_AREA(#536340); +#536340 = FILL_AREA_STYLE('',(#536341)); +#536341 = FILL_AREA_STYLE_COLOUR('',#512538); +#536342 = STYLED_ITEM('color',(#536343),#167851); +#536343 = PRESENTATION_STYLE_ASSIGNMENT((#536344)); +#536344 = SURFACE_STYLE_USAGE(.BOTH.,#536345); +#536345 = SURFACE_SIDE_STYLE('',(#536346)); +#536346 = SURFACE_STYLE_FILL_AREA(#536347); +#536347 = FILL_AREA_STYLE('',(#536348)); +#536348 = FILL_AREA_STYLE_COLOUR('',#512538); +#536349 = STYLED_ITEM('color',(#536350),#167875); +#536350 = PRESENTATION_STYLE_ASSIGNMENT((#536351)); +#536351 = SURFACE_STYLE_USAGE(.BOTH.,#536352); +#536352 = SURFACE_SIDE_STYLE('',(#536353)); +#536353 = SURFACE_STYLE_FILL_AREA(#536354); +#536354 = FILL_AREA_STYLE('',(#536355)); +#536355 = FILL_AREA_STYLE_COLOUR('',#512538); +#536356 = STYLED_ITEM('color',(#536357),#167892); +#536357 = PRESENTATION_STYLE_ASSIGNMENT((#536358)); +#536358 = SURFACE_STYLE_USAGE(.BOTH.,#536359); +#536359 = SURFACE_SIDE_STYLE('',(#536360)); +#536360 = SURFACE_STYLE_FILL_AREA(#536361); +#536361 = FILL_AREA_STYLE('',(#536362)); +#536362 = FILL_AREA_STYLE_COLOUR('',#512501); +#536363 = STYLED_ITEM('color',(#536364),#168380); +#536364 = PRESENTATION_STYLE_ASSIGNMENT((#536365)); +#536365 = SURFACE_STYLE_USAGE(.BOTH.,#536366); +#536366 = SURFACE_SIDE_STYLE('',(#536367)); +#536367 = SURFACE_STYLE_FILL_AREA(#536368); +#536368 = FILL_AREA_STYLE('',(#536369)); +#536369 = FILL_AREA_STYLE_COLOUR('',#512501); +#536370 = STYLED_ITEM('color',(#536371),#168411); +#536371 = PRESENTATION_STYLE_ASSIGNMENT((#536372)); +#536372 = SURFACE_STYLE_USAGE(.BOTH.,#536373); +#536373 = SURFACE_SIDE_STYLE('',(#536374)); +#536374 = SURFACE_STYLE_FILL_AREA(#536375); +#536375 = FILL_AREA_STYLE('',(#536376)); +#536376 = FILL_AREA_STYLE_COLOUR('',#512501); +#536377 = STYLED_ITEM('color',(#536378),#168435); +#536378 = PRESENTATION_STYLE_ASSIGNMENT((#536379)); +#536379 = SURFACE_STYLE_USAGE(.BOTH.,#536380); +#536380 = SURFACE_SIDE_STYLE('',(#536381)); +#536381 = SURFACE_STYLE_FILL_AREA(#536382); +#536382 = FILL_AREA_STYLE('',(#536383)); +#536383 = FILL_AREA_STYLE_COLOUR('',#512501); +#536384 = STYLED_ITEM('color',(#536385),#168459); +#536385 = PRESENTATION_STYLE_ASSIGNMENT((#536386)); +#536386 = SURFACE_STYLE_USAGE(.BOTH.,#536387); +#536387 = SURFACE_SIDE_STYLE('',(#536388)); +#536388 = SURFACE_STYLE_FILL_AREA(#536389); +#536389 = FILL_AREA_STYLE('',(#536390)); +#536390 = FILL_AREA_STYLE_COLOUR('',#512501); +#536391 = STYLED_ITEM('color',(#536392),#168476); +#536392 = PRESENTATION_STYLE_ASSIGNMENT((#536393)); +#536393 = SURFACE_STYLE_USAGE(.BOTH.,#536394); +#536394 = SURFACE_SIDE_STYLE('',(#536395)); +#536395 = SURFACE_STYLE_FILL_AREA(#536396); +#536396 = FILL_AREA_STYLE('',(#536397)); +#536397 = FILL_AREA_STYLE_COLOUR('',#512538); +#536398 = STYLED_ITEM('color',(#536399),#168507); +#536399 = PRESENTATION_STYLE_ASSIGNMENT((#536400)); +#536400 = SURFACE_STYLE_USAGE(.BOTH.,#536401); +#536401 = SURFACE_SIDE_STYLE('',(#536402)); +#536402 = SURFACE_STYLE_FILL_AREA(#536403); +#536403 = FILL_AREA_STYLE('',(#536404)); +#536404 = FILL_AREA_STYLE_COLOUR('',#512538); +#536405 = STYLED_ITEM('color',(#536406),#168531); +#536406 = PRESENTATION_STYLE_ASSIGNMENT((#536407)); +#536407 = SURFACE_STYLE_USAGE(.BOTH.,#536408); +#536408 = SURFACE_SIDE_STYLE('',(#536409)); +#536409 = SURFACE_STYLE_FILL_AREA(#536410); +#536410 = FILL_AREA_STYLE('',(#536411)); +#536411 = FILL_AREA_STYLE_COLOUR('',#512538); +#536412 = STYLED_ITEM('color',(#536413),#168555); +#536413 = PRESENTATION_STYLE_ASSIGNMENT((#536414)); +#536414 = SURFACE_STYLE_USAGE(.BOTH.,#536415); +#536415 = SURFACE_SIDE_STYLE('',(#536416)); +#536416 = SURFACE_STYLE_FILL_AREA(#536417); +#536417 = FILL_AREA_STYLE('',(#536418)); +#536418 = FILL_AREA_STYLE_COLOUR('',#512538); +#536419 = STYLED_ITEM('color',(#536420),#168572); +#536420 = PRESENTATION_STYLE_ASSIGNMENT((#536421)); +#536421 = SURFACE_STYLE_USAGE(.BOTH.,#536422); +#536422 = SURFACE_SIDE_STYLE('',(#536423)); +#536423 = SURFACE_STYLE_FILL_AREA(#536424); +#536424 = FILL_AREA_STYLE('',(#536425)); +#536425 = FILL_AREA_STYLE_COLOUR('',#512538); +#536426 = STYLED_ITEM('color',(#536427),#168603); +#536427 = PRESENTATION_STYLE_ASSIGNMENT((#536428)); +#536428 = SURFACE_STYLE_USAGE(.BOTH.,#536429); +#536429 = SURFACE_SIDE_STYLE('',(#536430)); +#536430 = SURFACE_STYLE_FILL_AREA(#536431); +#536431 = FILL_AREA_STYLE('',(#536432)); +#536432 = FILL_AREA_STYLE_COLOUR('',#512538); +#536433 = STYLED_ITEM('color',(#536434),#168627); +#536434 = PRESENTATION_STYLE_ASSIGNMENT((#536435)); +#536435 = SURFACE_STYLE_USAGE(.BOTH.,#536436); +#536436 = SURFACE_SIDE_STYLE('',(#536437)); +#536437 = SURFACE_STYLE_FILL_AREA(#536438); +#536438 = FILL_AREA_STYLE('',(#536439)); +#536439 = FILL_AREA_STYLE_COLOUR('',#512538); +#536440 = STYLED_ITEM('color',(#536441),#168651); +#536441 = PRESENTATION_STYLE_ASSIGNMENT((#536442)); +#536442 = SURFACE_STYLE_USAGE(.BOTH.,#536443); +#536443 = SURFACE_SIDE_STYLE('',(#536444)); +#536444 = SURFACE_STYLE_FILL_AREA(#536445); +#536445 = FILL_AREA_STYLE('',(#536446)); +#536446 = FILL_AREA_STYLE_COLOUR('',#512538); +#536447 = STYLED_ITEM('color',(#536448),#168668); +#536448 = PRESENTATION_STYLE_ASSIGNMENT((#536449)); +#536449 = SURFACE_STYLE_USAGE(.BOTH.,#536450); +#536450 = SURFACE_SIDE_STYLE('',(#536451)); +#536451 = SURFACE_STYLE_FILL_AREA(#536452); +#536452 = FILL_AREA_STYLE('',(#536453)); +#536453 = FILL_AREA_STYLE_COLOUR('',#512538); +#536454 = STYLED_ITEM('color',(#536455),#168699); +#536455 = PRESENTATION_STYLE_ASSIGNMENT((#536456)); +#536456 = SURFACE_STYLE_USAGE(.BOTH.,#536457); +#536457 = SURFACE_SIDE_STYLE('',(#536458)); +#536458 = SURFACE_STYLE_FILL_AREA(#536459); +#536459 = FILL_AREA_STYLE('',(#536460)); +#536460 = FILL_AREA_STYLE_COLOUR('',#512538); +#536461 = STYLED_ITEM('color',(#536462),#168723); +#536462 = PRESENTATION_STYLE_ASSIGNMENT((#536463)); +#536463 = SURFACE_STYLE_USAGE(.BOTH.,#536464); +#536464 = SURFACE_SIDE_STYLE('',(#536465)); +#536465 = SURFACE_STYLE_FILL_AREA(#536466); +#536466 = FILL_AREA_STYLE('',(#536467)); +#536467 = FILL_AREA_STYLE_COLOUR('',#512538); +#536468 = STYLED_ITEM('color',(#536469),#168747); +#536469 = PRESENTATION_STYLE_ASSIGNMENT((#536470)); +#536470 = SURFACE_STYLE_USAGE(.BOTH.,#536471); +#536471 = SURFACE_SIDE_STYLE('',(#536472)); +#536472 = SURFACE_STYLE_FILL_AREA(#536473); +#536473 = FILL_AREA_STYLE('',(#536474)); +#536474 = FILL_AREA_STYLE_COLOUR('',#512538); +#536475 = STYLED_ITEM('color',(#536476),#168764); +#536476 = PRESENTATION_STYLE_ASSIGNMENT((#536477)); +#536477 = SURFACE_STYLE_USAGE(.BOTH.,#536478); +#536478 = SURFACE_SIDE_STYLE('',(#536479)); +#536479 = SURFACE_STYLE_FILL_AREA(#536480); +#536480 = FILL_AREA_STYLE('',(#536481)); +#536481 = FILL_AREA_STYLE_COLOUR('',#512538); +#536482 = STYLED_ITEM('color',(#536483),#168795); +#536483 = PRESENTATION_STYLE_ASSIGNMENT((#536484)); +#536484 = SURFACE_STYLE_USAGE(.BOTH.,#536485); +#536485 = SURFACE_SIDE_STYLE('',(#536486)); +#536486 = SURFACE_STYLE_FILL_AREA(#536487); +#536487 = FILL_AREA_STYLE('',(#536488)); +#536488 = FILL_AREA_STYLE_COLOUR('',#512538); +#536489 = STYLED_ITEM('color',(#536490),#168819); +#536490 = PRESENTATION_STYLE_ASSIGNMENT((#536491)); +#536491 = SURFACE_STYLE_USAGE(.BOTH.,#536492); +#536492 = SURFACE_SIDE_STYLE('',(#536493)); +#536493 = SURFACE_STYLE_FILL_AREA(#536494); +#536494 = FILL_AREA_STYLE('',(#536495)); +#536495 = FILL_AREA_STYLE_COLOUR('',#512538); +#536496 = STYLED_ITEM('color',(#536497),#168843); +#536497 = PRESENTATION_STYLE_ASSIGNMENT((#536498)); +#536498 = SURFACE_STYLE_USAGE(.BOTH.,#536499); +#536499 = SURFACE_SIDE_STYLE('',(#536500)); +#536500 = SURFACE_STYLE_FILL_AREA(#536501); +#536501 = FILL_AREA_STYLE('',(#536502)); +#536502 = FILL_AREA_STYLE_COLOUR('',#512538); +#536503 = STYLED_ITEM('color',(#536504),#168860); +#536504 = PRESENTATION_STYLE_ASSIGNMENT((#536505)); +#536505 = SURFACE_STYLE_USAGE(.BOTH.,#536506); +#536506 = SURFACE_SIDE_STYLE('',(#536507)); +#536507 = SURFACE_STYLE_FILL_AREA(#536508); +#536508 = FILL_AREA_STYLE('',(#536509)); +#536509 = FILL_AREA_STYLE_COLOUR('',#512538); +#536510 = STYLED_ITEM('color',(#536511),#168891); +#536511 = PRESENTATION_STYLE_ASSIGNMENT((#536512)); +#536512 = SURFACE_STYLE_USAGE(.BOTH.,#536513); +#536513 = SURFACE_SIDE_STYLE('',(#536514)); +#536514 = SURFACE_STYLE_FILL_AREA(#536515); +#536515 = FILL_AREA_STYLE('',(#536516)); +#536516 = FILL_AREA_STYLE_COLOUR('',#512538); +#536517 = STYLED_ITEM('color',(#536518),#168915); +#536518 = PRESENTATION_STYLE_ASSIGNMENT((#536519)); +#536519 = SURFACE_STYLE_USAGE(.BOTH.,#536520); +#536520 = SURFACE_SIDE_STYLE('',(#536521)); +#536521 = SURFACE_STYLE_FILL_AREA(#536522); +#536522 = FILL_AREA_STYLE('',(#536523)); +#536523 = FILL_AREA_STYLE_COLOUR('',#512538); +#536524 = STYLED_ITEM('color',(#536525),#168939); +#536525 = PRESENTATION_STYLE_ASSIGNMENT((#536526)); +#536526 = SURFACE_STYLE_USAGE(.BOTH.,#536527); +#536527 = SURFACE_SIDE_STYLE('',(#536528)); +#536528 = SURFACE_STYLE_FILL_AREA(#536529); +#536529 = FILL_AREA_STYLE('',(#536530)); +#536530 = FILL_AREA_STYLE_COLOUR('',#512538); +#536531 = STYLED_ITEM('color',(#536532),#168956); +#536532 = PRESENTATION_STYLE_ASSIGNMENT((#536533)); +#536533 = SURFACE_STYLE_USAGE(.BOTH.,#536534); +#536534 = SURFACE_SIDE_STYLE('',(#536535)); +#536535 = SURFACE_STYLE_FILL_AREA(#536536); +#536536 = FILL_AREA_STYLE('',(#536537)); +#536537 = FILL_AREA_STYLE_COLOUR('',#512538); +#536538 = STYLED_ITEM('color',(#536539),#168987); +#536539 = PRESENTATION_STYLE_ASSIGNMENT((#536540)); +#536540 = SURFACE_STYLE_USAGE(.BOTH.,#536541); +#536541 = SURFACE_SIDE_STYLE('',(#536542)); +#536542 = SURFACE_STYLE_FILL_AREA(#536543); +#536543 = FILL_AREA_STYLE('',(#536544)); +#536544 = FILL_AREA_STYLE_COLOUR('',#512538); +#536545 = STYLED_ITEM('color',(#536546),#169011); +#536546 = PRESENTATION_STYLE_ASSIGNMENT((#536547)); +#536547 = SURFACE_STYLE_USAGE(.BOTH.,#536548); +#536548 = SURFACE_SIDE_STYLE('',(#536549)); +#536549 = SURFACE_STYLE_FILL_AREA(#536550); +#536550 = FILL_AREA_STYLE('',(#536551)); +#536551 = FILL_AREA_STYLE_COLOUR('',#512538); +#536552 = STYLED_ITEM('color',(#536553),#169035); +#536553 = PRESENTATION_STYLE_ASSIGNMENT((#536554)); +#536554 = SURFACE_STYLE_USAGE(.BOTH.,#536555); +#536555 = SURFACE_SIDE_STYLE('',(#536556)); +#536556 = SURFACE_STYLE_FILL_AREA(#536557); +#536557 = FILL_AREA_STYLE('',(#536558)); +#536558 = FILL_AREA_STYLE_COLOUR('',#512538); +#536559 = STYLED_ITEM('color',(#536560),#169052); +#536560 = PRESENTATION_STYLE_ASSIGNMENT((#536561)); +#536561 = SURFACE_STYLE_USAGE(.BOTH.,#536562); +#536562 = SURFACE_SIDE_STYLE('',(#536563)); +#536563 = SURFACE_STYLE_FILL_AREA(#536564); +#536564 = FILL_AREA_STYLE('',(#536565)); +#536565 = FILL_AREA_STYLE_COLOUR('',#512538); +#536566 = STYLED_ITEM('color',(#536567),#169083); +#536567 = PRESENTATION_STYLE_ASSIGNMENT((#536568)); +#536568 = SURFACE_STYLE_USAGE(.BOTH.,#536569); +#536569 = SURFACE_SIDE_STYLE('',(#536570)); +#536570 = SURFACE_STYLE_FILL_AREA(#536571); +#536571 = FILL_AREA_STYLE('',(#536572)); +#536572 = FILL_AREA_STYLE_COLOUR('',#512538); +#536573 = STYLED_ITEM('color',(#536574),#169107); +#536574 = PRESENTATION_STYLE_ASSIGNMENT((#536575)); +#536575 = SURFACE_STYLE_USAGE(.BOTH.,#536576); +#536576 = SURFACE_SIDE_STYLE('',(#536577)); +#536577 = SURFACE_STYLE_FILL_AREA(#536578); +#536578 = FILL_AREA_STYLE('',(#536579)); +#536579 = FILL_AREA_STYLE_COLOUR('',#512538); +#536580 = STYLED_ITEM('color',(#536581),#169131); +#536581 = PRESENTATION_STYLE_ASSIGNMENT((#536582)); +#536582 = SURFACE_STYLE_USAGE(.BOTH.,#536583); +#536583 = SURFACE_SIDE_STYLE('',(#536584)); +#536584 = SURFACE_STYLE_FILL_AREA(#536585); +#536585 = FILL_AREA_STYLE('',(#536586)); +#536586 = FILL_AREA_STYLE_COLOUR('',#512538); +#536587 = STYLED_ITEM('color',(#536588),#169148); +#536588 = PRESENTATION_STYLE_ASSIGNMENT((#536589)); +#536589 = SURFACE_STYLE_USAGE(.BOTH.,#536590); +#536590 = SURFACE_SIDE_STYLE('',(#536591)); +#536591 = SURFACE_STYLE_FILL_AREA(#536592); +#536592 = FILL_AREA_STYLE('',(#536593)); +#536593 = FILL_AREA_STYLE_COLOUR('',#512538); +#536594 = STYLED_ITEM('color',(#536595),#169179); +#536595 = PRESENTATION_STYLE_ASSIGNMENT((#536596)); +#536596 = SURFACE_STYLE_USAGE(.BOTH.,#536597); +#536597 = SURFACE_SIDE_STYLE('',(#536598)); +#536598 = SURFACE_STYLE_FILL_AREA(#536599); +#536599 = FILL_AREA_STYLE('',(#536600)); +#536600 = FILL_AREA_STYLE_COLOUR('',#512538); +#536601 = STYLED_ITEM('color',(#536602),#169203); +#536602 = PRESENTATION_STYLE_ASSIGNMENT((#536603)); +#536603 = SURFACE_STYLE_USAGE(.BOTH.,#536604); +#536604 = SURFACE_SIDE_STYLE('',(#536605)); +#536605 = SURFACE_STYLE_FILL_AREA(#536606); +#536606 = FILL_AREA_STYLE('',(#536607)); +#536607 = FILL_AREA_STYLE_COLOUR('',#512538); +#536608 = STYLED_ITEM('color',(#536609),#169227); +#536609 = PRESENTATION_STYLE_ASSIGNMENT((#536610)); +#536610 = SURFACE_STYLE_USAGE(.BOTH.,#536611); +#536611 = SURFACE_SIDE_STYLE('',(#536612)); +#536612 = SURFACE_STYLE_FILL_AREA(#536613); +#536613 = FILL_AREA_STYLE('',(#536614)); +#536614 = FILL_AREA_STYLE_COLOUR('',#512538); +#536615 = STYLED_ITEM('color',(#536616),#169244); +#536616 = PRESENTATION_STYLE_ASSIGNMENT((#536617)); +#536617 = SURFACE_STYLE_USAGE(.BOTH.,#536618); +#536618 = SURFACE_SIDE_STYLE('',(#536619)); +#536619 = SURFACE_STYLE_FILL_AREA(#536620); +#536620 = FILL_AREA_STYLE('',(#536621)); +#536621 = FILL_AREA_STYLE_COLOUR('',#512538); +#536622 = STYLED_ITEM('color',(#536623),#169275); +#536623 = PRESENTATION_STYLE_ASSIGNMENT((#536624)); +#536624 = SURFACE_STYLE_USAGE(.BOTH.,#536625); +#536625 = SURFACE_SIDE_STYLE('',(#536626)); +#536626 = SURFACE_STYLE_FILL_AREA(#536627); +#536627 = FILL_AREA_STYLE('',(#536628)); +#536628 = FILL_AREA_STYLE_COLOUR('',#512538); +#536629 = STYLED_ITEM('color',(#536630),#169299); +#536630 = PRESENTATION_STYLE_ASSIGNMENT((#536631)); +#536631 = SURFACE_STYLE_USAGE(.BOTH.,#536632); +#536632 = SURFACE_SIDE_STYLE('',(#536633)); +#536633 = SURFACE_STYLE_FILL_AREA(#536634); +#536634 = FILL_AREA_STYLE('',(#536635)); +#536635 = FILL_AREA_STYLE_COLOUR('',#512538); +#536636 = STYLED_ITEM('color',(#536637),#169323); +#536637 = PRESENTATION_STYLE_ASSIGNMENT((#536638)); +#536638 = SURFACE_STYLE_USAGE(.BOTH.,#536639); +#536639 = SURFACE_SIDE_STYLE('',(#536640)); +#536640 = SURFACE_STYLE_FILL_AREA(#536641); +#536641 = FILL_AREA_STYLE('',(#536642)); +#536642 = FILL_AREA_STYLE_COLOUR('',#512538); +#536643 = STYLED_ITEM('color',(#536644),#169340); +#536644 = PRESENTATION_STYLE_ASSIGNMENT((#536645)); +#536645 = SURFACE_STYLE_USAGE(.BOTH.,#536646); +#536646 = SURFACE_SIDE_STYLE('',(#536647)); +#536647 = SURFACE_STYLE_FILL_AREA(#536648); +#536648 = FILL_AREA_STYLE('',(#536649)); +#536649 = FILL_AREA_STYLE_COLOUR('',#512538); +#536650 = STYLED_ITEM('color',(#536651),#169371); +#536651 = PRESENTATION_STYLE_ASSIGNMENT((#536652)); +#536652 = SURFACE_STYLE_USAGE(.BOTH.,#536653); +#536653 = SURFACE_SIDE_STYLE('',(#536654)); +#536654 = SURFACE_STYLE_FILL_AREA(#536655); +#536655 = FILL_AREA_STYLE('',(#536656)); +#536656 = FILL_AREA_STYLE_COLOUR('',#512538); +#536657 = STYLED_ITEM('color',(#536658),#169395); +#536658 = PRESENTATION_STYLE_ASSIGNMENT((#536659)); +#536659 = SURFACE_STYLE_USAGE(.BOTH.,#536660); +#536660 = SURFACE_SIDE_STYLE('',(#536661)); +#536661 = SURFACE_STYLE_FILL_AREA(#536662); +#536662 = FILL_AREA_STYLE('',(#536663)); +#536663 = FILL_AREA_STYLE_COLOUR('',#512538); +#536664 = STYLED_ITEM('color',(#536665),#169419); +#536665 = PRESENTATION_STYLE_ASSIGNMENT((#536666)); +#536666 = SURFACE_STYLE_USAGE(.BOTH.,#536667); +#536667 = SURFACE_SIDE_STYLE('',(#536668)); +#536668 = SURFACE_STYLE_FILL_AREA(#536669); +#536669 = FILL_AREA_STYLE('',(#536670)); +#536670 = FILL_AREA_STYLE_COLOUR('',#512538); +#536671 = STYLED_ITEM('color',(#536672),#169436); +#536672 = PRESENTATION_STYLE_ASSIGNMENT((#536673)); +#536673 = SURFACE_STYLE_USAGE(.BOTH.,#536674); +#536674 = SURFACE_SIDE_STYLE('',(#536675)); +#536675 = SURFACE_STYLE_FILL_AREA(#536676); +#536676 = FILL_AREA_STYLE('',(#536677)); +#536677 = FILL_AREA_STYLE_COLOUR('',#512538); +#536678 = STYLED_ITEM('color',(#536679),#169467); +#536679 = PRESENTATION_STYLE_ASSIGNMENT((#536680)); +#536680 = SURFACE_STYLE_USAGE(.BOTH.,#536681); +#536681 = SURFACE_SIDE_STYLE('',(#536682)); +#536682 = SURFACE_STYLE_FILL_AREA(#536683); +#536683 = FILL_AREA_STYLE('',(#536684)); +#536684 = FILL_AREA_STYLE_COLOUR('',#512538); +#536685 = STYLED_ITEM('color',(#536686),#169491); +#536686 = PRESENTATION_STYLE_ASSIGNMENT((#536687)); +#536687 = SURFACE_STYLE_USAGE(.BOTH.,#536688); +#536688 = SURFACE_SIDE_STYLE('',(#536689)); +#536689 = SURFACE_STYLE_FILL_AREA(#536690); +#536690 = FILL_AREA_STYLE('',(#536691)); +#536691 = FILL_AREA_STYLE_COLOUR('',#512538); +#536692 = STYLED_ITEM('color',(#536693),#169515); +#536693 = PRESENTATION_STYLE_ASSIGNMENT((#536694)); +#536694 = SURFACE_STYLE_USAGE(.BOTH.,#536695); +#536695 = SURFACE_SIDE_STYLE('',(#536696)); +#536696 = SURFACE_STYLE_FILL_AREA(#536697); +#536697 = FILL_AREA_STYLE('',(#536698)); +#536698 = FILL_AREA_STYLE_COLOUR('',#512538); +#536699 = STYLED_ITEM('color',(#536700),#169532); +#536700 = PRESENTATION_STYLE_ASSIGNMENT((#536701)); +#536701 = SURFACE_STYLE_USAGE(.BOTH.,#536702); +#536702 = SURFACE_SIDE_STYLE('',(#536703)); +#536703 = SURFACE_STYLE_FILL_AREA(#536704); +#536704 = FILL_AREA_STYLE('',(#536705)); +#536705 = FILL_AREA_STYLE_COLOUR('',#512538); +#536706 = STYLED_ITEM('color',(#536707),#169563); +#536707 = PRESENTATION_STYLE_ASSIGNMENT((#536708)); +#536708 = SURFACE_STYLE_USAGE(.BOTH.,#536709); +#536709 = SURFACE_SIDE_STYLE('',(#536710)); +#536710 = SURFACE_STYLE_FILL_AREA(#536711); +#536711 = FILL_AREA_STYLE('',(#536712)); +#536712 = FILL_AREA_STYLE_COLOUR('',#512538); +#536713 = STYLED_ITEM('color',(#536714),#169587); +#536714 = PRESENTATION_STYLE_ASSIGNMENT((#536715)); +#536715 = SURFACE_STYLE_USAGE(.BOTH.,#536716); +#536716 = SURFACE_SIDE_STYLE('',(#536717)); +#536717 = SURFACE_STYLE_FILL_AREA(#536718); +#536718 = FILL_AREA_STYLE('',(#536719)); +#536719 = FILL_AREA_STYLE_COLOUR('',#512538); +#536720 = STYLED_ITEM('color',(#536721),#169611); +#536721 = PRESENTATION_STYLE_ASSIGNMENT((#536722)); +#536722 = SURFACE_STYLE_USAGE(.BOTH.,#536723); +#536723 = SURFACE_SIDE_STYLE('',(#536724)); +#536724 = SURFACE_STYLE_FILL_AREA(#536725); +#536725 = FILL_AREA_STYLE('',(#536726)); +#536726 = FILL_AREA_STYLE_COLOUR('',#512538); +#536727 = STYLED_ITEM('color',(#536728),#169628); +#536728 = PRESENTATION_STYLE_ASSIGNMENT((#536729)); +#536729 = SURFACE_STYLE_USAGE(.BOTH.,#536730); +#536730 = SURFACE_SIDE_STYLE('',(#536731)); +#536731 = SURFACE_STYLE_FILL_AREA(#536732); +#536732 = FILL_AREA_STYLE('',(#536733)); +#536733 = FILL_AREA_STYLE_COLOUR('',#512538); +#536734 = STYLED_ITEM('color',(#536735),#169659); +#536735 = PRESENTATION_STYLE_ASSIGNMENT((#536736)); +#536736 = SURFACE_STYLE_USAGE(.BOTH.,#536737); +#536737 = SURFACE_SIDE_STYLE('',(#536738)); +#536738 = SURFACE_STYLE_FILL_AREA(#536739); +#536739 = FILL_AREA_STYLE('',(#536740)); +#536740 = FILL_AREA_STYLE_COLOUR('',#512538); +#536741 = STYLED_ITEM('color',(#536742),#169683); +#536742 = PRESENTATION_STYLE_ASSIGNMENT((#536743)); +#536743 = SURFACE_STYLE_USAGE(.BOTH.,#536744); +#536744 = SURFACE_SIDE_STYLE('',(#536745)); +#536745 = SURFACE_STYLE_FILL_AREA(#536746); +#536746 = FILL_AREA_STYLE('',(#536747)); +#536747 = FILL_AREA_STYLE_COLOUR('',#512538); +#536748 = STYLED_ITEM('color',(#536749),#169707); +#536749 = PRESENTATION_STYLE_ASSIGNMENT((#536750)); +#536750 = SURFACE_STYLE_USAGE(.BOTH.,#536751); +#536751 = SURFACE_SIDE_STYLE('',(#536752)); +#536752 = SURFACE_STYLE_FILL_AREA(#536753); +#536753 = FILL_AREA_STYLE('',(#536754)); +#536754 = FILL_AREA_STYLE_COLOUR('',#512538); +#536755 = STYLED_ITEM('color',(#536756),#169724); +#536756 = PRESENTATION_STYLE_ASSIGNMENT((#536757)); +#536757 = SURFACE_STYLE_USAGE(.BOTH.,#536758); +#536758 = SURFACE_SIDE_STYLE('',(#536759)); +#536759 = SURFACE_STYLE_FILL_AREA(#536760); +#536760 = FILL_AREA_STYLE('',(#536761)); +#536761 = FILL_AREA_STYLE_COLOUR('',#512501); +#536762 = STYLED_ITEM('color',(#536763),#169747); +#536763 = PRESENTATION_STYLE_ASSIGNMENT((#536764)); +#536764 = SURFACE_STYLE_USAGE(.BOTH.,#536765); +#536765 = SURFACE_SIDE_STYLE('',(#536766)); +#536766 = SURFACE_STYLE_FILL_AREA(#536767); +#536767 = FILL_AREA_STYLE('',(#536768)); +#536768 = FILL_AREA_STYLE_COLOUR('',#512538); +#536769 = STYLED_ITEM('color',(#536770),#169759); +#536770 = PRESENTATION_STYLE_ASSIGNMENT((#536771)); +#536771 = SURFACE_STYLE_USAGE(.BOTH.,#536772); +#536772 = SURFACE_SIDE_STYLE('',(#536773)); +#536773 = SURFACE_STYLE_FILL_AREA(#536774); +#536774 = FILL_AREA_STYLE('',(#536775)); +#536775 = FILL_AREA_STYLE_COLOUR('',#512538); +#536776 = STYLED_ITEM('color',(#536777),#169771); +#536777 = PRESENTATION_STYLE_ASSIGNMENT((#536778)); +#536778 = SURFACE_STYLE_USAGE(.BOTH.,#536779); +#536779 = SURFACE_SIDE_STYLE('',(#536780)); +#536780 = SURFACE_STYLE_FILL_AREA(#536781); +#536781 = FILL_AREA_STYLE('',(#536782)); +#536782 = FILL_AREA_STYLE_COLOUR('',#512538); +#536783 = STYLED_ITEM('color',(#536784),#169783); +#536784 = PRESENTATION_STYLE_ASSIGNMENT((#536785)); +#536785 = SURFACE_STYLE_USAGE(.BOTH.,#536786); +#536786 = SURFACE_SIDE_STYLE('',(#536787)); +#536787 = SURFACE_STYLE_FILL_AREA(#536788); +#536788 = FILL_AREA_STYLE('',(#536789)); +#536789 = FILL_AREA_STYLE_COLOUR('',#512538); +#536790 = STYLED_ITEM('color',(#536791),#169795); +#536791 = PRESENTATION_STYLE_ASSIGNMENT((#536792)); +#536792 = SURFACE_STYLE_USAGE(.BOTH.,#536793); +#536793 = SURFACE_SIDE_STYLE('',(#536794)); +#536794 = SURFACE_STYLE_FILL_AREA(#536795); +#536795 = FILL_AREA_STYLE('',(#536796)); +#536796 = FILL_AREA_STYLE_COLOUR('',#512538); +#536797 = STYLED_ITEM('color',(#536798),#169807); +#536798 = PRESENTATION_STYLE_ASSIGNMENT((#536799)); +#536799 = SURFACE_STYLE_USAGE(.BOTH.,#536800); +#536800 = SURFACE_SIDE_STYLE('',(#536801)); +#536801 = SURFACE_STYLE_FILL_AREA(#536802); +#536802 = FILL_AREA_STYLE('',(#536803)); +#536803 = FILL_AREA_STYLE_COLOUR('',#512538); +#536804 = STYLED_ITEM('color',(#536805),#169819); +#536805 = PRESENTATION_STYLE_ASSIGNMENT((#536806)); +#536806 = SURFACE_STYLE_USAGE(.BOTH.,#536807); +#536807 = SURFACE_SIDE_STYLE('',(#536808)); +#536808 = SURFACE_STYLE_FILL_AREA(#536809); +#536809 = FILL_AREA_STYLE('',(#536810)); +#536810 = FILL_AREA_STYLE_COLOUR('',#512538); +#536811 = STYLED_ITEM('color',(#536812),#169831); +#536812 = PRESENTATION_STYLE_ASSIGNMENT((#536813)); +#536813 = SURFACE_STYLE_USAGE(.BOTH.,#536814); +#536814 = SURFACE_SIDE_STYLE('',(#536815)); +#536815 = SURFACE_STYLE_FILL_AREA(#536816); +#536816 = FILL_AREA_STYLE('',(#536817)); +#536817 = FILL_AREA_STYLE_COLOUR('',#512538); +#536818 = STYLED_ITEM('color',(#536819),#169843); +#536819 = PRESENTATION_STYLE_ASSIGNMENT((#536820)); +#536820 = SURFACE_STYLE_USAGE(.BOTH.,#536821); +#536821 = SURFACE_SIDE_STYLE('',(#536822)); +#536822 = SURFACE_STYLE_FILL_AREA(#536823); +#536823 = FILL_AREA_STYLE('',(#536824)); +#536824 = FILL_AREA_STYLE_COLOUR('',#512538); +#536825 = STYLED_ITEM('color',(#536826),#169855); +#536826 = PRESENTATION_STYLE_ASSIGNMENT((#536827)); +#536827 = SURFACE_STYLE_USAGE(.BOTH.,#536828); +#536828 = SURFACE_SIDE_STYLE('',(#536829)); +#536829 = SURFACE_STYLE_FILL_AREA(#536830); +#536830 = FILL_AREA_STYLE('',(#536831)); +#536831 = FILL_AREA_STYLE_COLOUR('',#512538); +#536832 = STYLED_ITEM('color',(#536833),#169867); +#536833 = PRESENTATION_STYLE_ASSIGNMENT((#536834)); +#536834 = SURFACE_STYLE_USAGE(.BOTH.,#536835); +#536835 = SURFACE_SIDE_STYLE('',(#536836)); +#536836 = SURFACE_STYLE_FILL_AREA(#536837); +#536837 = FILL_AREA_STYLE('',(#536838)); +#536838 = FILL_AREA_STYLE_COLOUR('',#512538); +#536839 = STYLED_ITEM('color',(#536840),#169879); +#536840 = PRESENTATION_STYLE_ASSIGNMENT((#536841)); +#536841 = SURFACE_STYLE_USAGE(.BOTH.,#536842); +#536842 = SURFACE_SIDE_STYLE('',(#536843)); +#536843 = SURFACE_STYLE_FILL_AREA(#536844); +#536844 = FILL_AREA_STYLE('',(#536845)); +#536845 = FILL_AREA_STYLE_COLOUR('',#512538); +#536846 = STYLED_ITEM('color',(#536847),#169891); +#536847 = PRESENTATION_STYLE_ASSIGNMENT((#536848)); +#536848 = SURFACE_STYLE_USAGE(.BOTH.,#536849); +#536849 = SURFACE_SIDE_STYLE('',(#536850)); +#536850 = SURFACE_STYLE_FILL_AREA(#536851); +#536851 = FILL_AREA_STYLE('',(#536852)); +#536852 = FILL_AREA_STYLE_COLOUR('',#512538); +#536853 = STYLED_ITEM('color',(#536854),#169903); +#536854 = PRESENTATION_STYLE_ASSIGNMENT((#536855)); +#536855 = SURFACE_STYLE_USAGE(.BOTH.,#536856); +#536856 = SURFACE_SIDE_STYLE('',(#536857)); +#536857 = SURFACE_STYLE_FILL_AREA(#536858); +#536858 = FILL_AREA_STYLE('',(#536859)); +#536859 = FILL_AREA_STYLE_COLOUR('',#512989); +#536860 = STYLED_ITEM('color',(#536861),#169928); +#536861 = PRESENTATION_STYLE_ASSIGNMENT((#536862)); +#536862 = SURFACE_STYLE_USAGE(.BOTH.,#536863); +#536863 = SURFACE_SIDE_STYLE('',(#536864)); +#536864 = SURFACE_STYLE_FILL_AREA(#536865); +#536865 = FILL_AREA_STYLE('',(#536866)); +#536866 = FILL_AREA_STYLE_COLOUR('',#512989); +#536867 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #536868,#536877,#536886,#536895,#536905,#536914,#536923,#536932, + #536941,#536950,#536959,#536968,#536977,#536986,#536995,#537004, + #537013,#537022,#537031,#537040,#537049,#537058,#537067,#537076, + #537085,#537094,#537103,#537112,#537121,#537130,#537139,#537148, + #537157,#537166,#537175,#537184,#537193,#537202,#537211,#537220, + #537229,#537238,#537247,#537256,#537265,#537274,#537283,#537292, + #537301,#537310,#537319,#537328,#537337,#537346,#537355,#537364, + #537373,#537382,#537391,#537400,#537409,#537418,#537427,#537436, + #537445,#537454,#537463,#537472,#537481,#537490,#537499,#537508, + #537517,#537526,#537535,#537544,#537553,#537562,#537571,#537580, + #537589,#537598,#537607,#537616,#537625,#537634,#537643,#537652, + #537661,#537670,#537679,#537688,#537697,#537706,#537715,#537724, + #537733,#537742,#537751,#537760,#537769,#537778,#537787,#537796, + #537805,#537814,#537823,#537832,#537841,#537850,#537859,#537868, + #537877,#537886,#537895,#537904,#537913,#537922,#537931,#537940, + #537949,#537958,#537967,#537976,#537985,#537994,#538003,#538012, + #538021,#538030,#538039,#538048,#538057,#538066,#538075,#538084, + #538093,#538102,#538111,#538120,#538129,#538138,#538147,#538156, + #538165,#538174,#538183,#538192,#538201,#538210,#538219,#538228, + #538237,#538246,#538255,#538264,#538273,#538282,#538291,#538300, + #538309,#538318,#538327,#538336,#538345,#538354,#538363,#538372, + #538381,#538390,#538399,#538408,#538417,#538426,#538435,#538444, + #538453,#538462,#538471,#538480,#538489,#538498,#538507,#538516), + #79357); +#536868 = STYLED_ITEM('color',(#536869),#73971); +#536869 = PRESENTATION_STYLE_ASSIGNMENT((#536870,#536875)); +#536870 = SURFACE_STYLE_USAGE(.BOTH.,#536871); +#536871 = SURFACE_SIDE_STYLE('',(#536872)); +#536872 = SURFACE_STYLE_FILL_AREA(#536873); +#536873 = FILL_AREA_STYLE('',(#536874)); +#536874 = FILL_AREA_STYLE_COLOUR('',#512501); +#536875 = CURVE_STYLE('',#536876,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#536876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536877 = STYLED_ITEM('color',(#536878),#74020); +#536878 = PRESENTATION_STYLE_ASSIGNMENT((#536879,#536884)); +#536879 = SURFACE_STYLE_USAGE(.BOTH.,#536880); +#536880 = SURFACE_SIDE_STYLE('',(#536881)); +#536881 = SURFACE_STYLE_FILL_AREA(#536882); +#536882 = FILL_AREA_STYLE('',(#536883)); +#536883 = FILL_AREA_STYLE_COLOUR('',#512501); +#536884 = CURVE_STYLE('',#536885,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#536885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536886 = STYLED_ITEM('color',(#536887),#74179); +#536887 = PRESENTATION_STYLE_ASSIGNMENT((#536888,#536893)); +#536888 = SURFACE_STYLE_USAGE(.BOTH.,#536889); +#536889 = SURFACE_SIDE_STYLE('',(#536890)); +#536890 = SURFACE_STYLE_FILL_AREA(#536891); +#536891 = FILL_AREA_STYLE('',(#536892)); +#536892 = FILL_AREA_STYLE_COLOUR('',#512501); +#536893 = CURVE_STYLE('',#536894,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#536894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536895 = STYLED_ITEM('color',(#536896),#74203); +#536896 = PRESENTATION_STYLE_ASSIGNMENT((#536897,#536903)); +#536897 = SURFACE_STYLE_USAGE(.BOTH.,#536898); +#536898 = SURFACE_SIDE_STYLE('',(#536899)); +#536899 = SURFACE_STYLE_FILL_AREA(#536900); +#536900 = FILL_AREA_STYLE('',(#536901)); +#536901 = FILL_AREA_STYLE_COLOUR('',#536902); +#536902 = COLOUR_RGB('',0.507540004841,0.507540004841,0.507540004841); +#536903 = CURVE_STYLE('',#536904,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#536904 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536905 = STYLED_ITEM('color',(#536906),#74227); +#536906 = PRESENTATION_STYLE_ASSIGNMENT((#536907,#536912)); +#536907 = SURFACE_STYLE_USAGE(.BOTH.,#536908); +#536908 = SURFACE_SIDE_STYLE('',(#536909)); +#536909 = SURFACE_STYLE_FILL_AREA(#536910); +#536910 = FILL_AREA_STYLE('',(#536911)); +#536911 = FILL_AREA_STYLE_COLOUR('',#536902); +#536912 = CURVE_STYLE('',#536913,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#536913 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536914 = STYLED_ITEM('color',(#536915),#74252); +#536915 = PRESENTATION_STYLE_ASSIGNMENT((#536916,#536921)); +#536916 = SURFACE_STYLE_USAGE(.BOTH.,#536917); +#536917 = SURFACE_SIDE_STYLE('',(#536918)); +#536918 = SURFACE_STYLE_FILL_AREA(#536919); +#536919 = FILL_AREA_STYLE('',(#536920)); +#536920 = FILL_AREA_STYLE_COLOUR('',#512501); +#536921 = CURVE_STYLE('',#536922,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#536922 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536923 = OVER_RIDING_STYLED_ITEM('overriding color',(#536924),#74417, + #536914); +#536924 = PRESENTATION_STYLE_ASSIGNMENT((#536925,#536930)); +#536925 = SURFACE_STYLE_USAGE(.BOTH.,#536926); +#536926 = SURFACE_SIDE_STYLE('',(#536927)); +#536927 = SURFACE_STYLE_FILL_AREA(#536928); +#536928 = FILL_AREA_STYLE('',(#536929)); +#536929 = FILL_AREA_STYLE_COLOUR('',#512538); +#536930 = CURVE_STYLE('',#536931,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536931 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536932 = OVER_RIDING_STYLED_ITEM('overriding color',(#536933),#74425, + #536914); +#536933 = PRESENTATION_STYLE_ASSIGNMENT((#536934,#536939)); +#536934 = SURFACE_STYLE_USAGE(.BOTH.,#536935); +#536935 = SURFACE_SIDE_STYLE('',(#536936)); +#536936 = SURFACE_STYLE_FILL_AREA(#536937); +#536937 = FILL_AREA_STYLE('',(#536938)); +#536938 = FILL_AREA_STYLE_COLOUR('',#512538); +#536939 = CURVE_STYLE('',#536940,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536940 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536941 = OVER_RIDING_STYLED_ITEM('overriding color',(#536942),#74433, + #536914); +#536942 = PRESENTATION_STYLE_ASSIGNMENT((#536943,#536948)); +#536943 = SURFACE_STYLE_USAGE(.BOTH.,#536944); +#536944 = SURFACE_SIDE_STYLE('',(#536945)); +#536945 = SURFACE_STYLE_FILL_AREA(#536946); +#536946 = FILL_AREA_STYLE('',(#536947)); +#536947 = FILL_AREA_STYLE_COLOUR('',#512538); +#536948 = CURVE_STYLE('',#536949,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536949 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536950 = OVER_RIDING_STYLED_ITEM('overriding color',(#536951),#74472, + #536914); +#536951 = PRESENTATION_STYLE_ASSIGNMENT((#536952,#536957)); +#536952 = SURFACE_STYLE_USAGE(.BOTH.,#536953); +#536953 = SURFACE_SIDE_STYLE('',(#536954)); +#536954 = SURFACE_STYLE_FILL_AREA(#536955); +#536955 = FILL_AREA_STYLE('',(#536956)); +#536956 = FILL_AREA_STYLE_COLOUR('',#512538); +#536957 = CURVE_STYLE('',#536958,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536958 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536959 = OVER_RIDING_STYLED_ITEM('overriding color',(#536960),#74480, + #536914); +#536960 = PRESENTATION_STYLE_ASSIGNMENT((#536961,#536966)); +#536961 = SURFACE_STYLE_USAGE(.BOTH.,#536962); +#536962 = SURFACE_SIDE_STYLE('',(#536963)); +#536963 = SURFACE_STYLE_FILL_AREA(#536964); +#536964 = FILL_AREA_STYLE('',(#536965)); +#536965 = FILL_AREA_STYLE_COLOUR('',#512538); +#536966 = CURVE_STYLE('',#536967,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536967 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536968 = OVER_RIDING_STYLED_ITEM('overriding color',(#536969),#74488, + #536914); +#536969 = PRESENTATION_STYLE_ASSIGNMENT((#536970,#536975)); +#536970 = SURFACE_STYLE_USAGE(.BOTH.,#536971); +#536971 = SURFACE_SIDE_STYLE('',(#536972)); +#536972 = SURFACE_STYLE_FILL_AREA(#536973); +#536973 = FILL_AREA_STYLE('',(#536974)); +#536974 = FILL_AREA_STYLE_COLOUR('',#512538); +#536975 = CURVE_STYLE('',#536976,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536976 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536977 = STYLED_ITEM('color',(#536978),#74514); +#536978 = PRESENTATION_STYLE_ASSIGNMENT((#536979,#536984)); +#536979 = SURFACE_STYLE_USAGE(.BOTH.,#536980); +#536980 = SURFACE_SIDE_STYLE('',(#536981)); +#536981 = SURFACE_STYLE_FILL_AREA(#536982); +#536982 = FILL_AREA_STYLE('',(#536983)); +#536983 = FILL_AREA_STYLE_COLOUR('',#512501); +#536984 = CURVE_STYLE('',#536985,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#536985 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536986 = STYLED_ITEM('color',(#536987),#74531); +#536987 = PRESENTATION_STYLE_ASSIGNMENT((#536988,#536993)); +#536988 = SURFACE_STYLE_USAGE(.BOTH.,#536989); +#536989 = SURFACE_SIDE_STYLE('',(#536990)); +#536990 = SURFACE_STYLE_FILL_AREA(#536991); +#536991 = FILL_AREA_STYLE('',(#536992)); +#536992 = FILL_AREA_STYLE_COLOUR('',#512538); +#536993 = CURVE_STYLE('',#536994,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#536994 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#536995 = STYLED_ITEM('color',(#536996),#74548); +#536996 = PRESENTATION_STYLE_ASSIGNMENT((#536997,#537002)); +#536997 = SURFACE_STYLE_USAGE(.BOTH.,#536998); +#536998 = SURFACE_SIDE_STYLE('',(#536999)); +#536999 = SURFACE_STYLE_FILL_AREA(#537000); +#537000 = FILL_AREA_STYLE('',(#537001)); +#537001 = FILL_AREA_STYLE_COLOUR('',#512501); +#537002 = CURVE_STYLE('',#537003,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537003 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537004 = STYLED_ITEM('color',(#537005),#74565); +#537005 = PRESENTATION_STYLE_ASSIGNMENT((#537006,#537011)); +#537006 = SURFACE_STYLE_USAGE(.BOTH.,#537007); +#537007 = SURFACE_SIDE_STYLE('',(#537008)); +#537008 = SURFACE_STYLE_FILL_AREA(#537009); +#537009 = FILL_AREA_STYLE('',(#537010)); +#537010 = FILL_AREA_STYLE_COLOUR('',#512501); +#537011 = CURVE_STYLE('',#537012,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537012 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537013 = STYLED_ITEM('color',(#537014),#74598); +#537014 = PRESENTATION_STYLE_ASSIGNMENT((#537015,#537020)); +#537015 = SURFACE_STYLE_USAGE(.BOTH.,#537016); +#537016 = SURFACE_SIDE_STYLE('',(#537017)); +#537017 = SURFACE_STYLE_FILL_AREA(#537018); +#537018 = FILL_AREA_STYLE('',(#537019)); +#537019 = FILL_AREA_STYLE_COLOUR('',#512501); +#537020 = CURVE_STYLE('',#537021,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537021 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537022 = STYLED_ITEM('color',(#537023),#74622); +#537023 = PRESENTATION_STYLE_ASSIGNMENT((#537024,#537029)); +#537024 = SURFACE_STYLE_USAGE(.BOTH.,#537025); +#537025 = SURFACE_SIDE_STYLE('',(#537026)); +#537026 = SURFACE_STYLE_FILL_AREA(#537027); +#537027 = FILL_AREA_STYLE('',(#537028)); +#537028 = FILL_AREA_STYLE_COLOUR('',#512501); +#537029 = CURVE_STYLE('',#537030,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537030 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537031 = STYLED_ITEM('color',(#537032),#74694); +#537032 = PRESENTATION_STYLE_ASSIGNMENT((#537033,#537038)); +#537033 = SURFACE_STYLE_USAGE(.BOTH.,#537034); +#537034 = SURFACE_SIDE_STYLE('',(#537035)); +#537035 = SURFACE_STYLE_FILL_AREA(#537036); +#537036 = FILL_AREA_STYLE('',(#537037)); +#537037 = FILL_AREA_STYLE_COLOUR('',#512501); +#537038 = CURVE_STYLE('',#537039,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537039 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537040 = STYLED_ITEM('color',(#537041),#74718); +#537041 = PRESENTATION_STYLE_ASSIGNMENT((#537042,#537047)); +#537042 = SURFACE_STYLE_USAGE(.BOTH.,#537043); +#537043 = SURFACE_SIDE_STYLE('',(#537044)); +#537044 = SURFACE_STYLE_FILL_AREA(#537045); +#537045 = FILL_AREA_STYLE('',(#537046)); +#537046 = FILL_AREA_STYLE_COLOUR('',#512501); +#537047 = CURVE_STYLE('',#537048,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537048 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537049 = STYLED_ITEM('color',(#537050),#74783); +#537050 = PRESENTATION_STYLE_ASSIGNMENT((#537051,#537056)); +#537051 = SURFACE_STYLE_USAGE(.BOTH.,#537052); +#537052 = SURFACE_SIDE_STYLE('',(#537053)); +#537053 = SURFACE_STYLE_FILL_AREA(#537054); +#537054 = FILL_AREA_STYLE('',(#537055)); +#537055 = FILL_AREA_STYLE_COLOUR('',#512501); +#537056 = CURVE_STYLE('',#537057,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537057 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537058 = STYLED_ITEM('color',(#537059),#74800); +#537059 = PRESENTATION_STYLE_ASSIGNMENT((#537060,#537065)); +#537060 = SURFACE_STYLE_USAGE(.BOTH.,#537061); +#537061 = SURFACE_SIDE_STYLE('',(#537062)); +#537062 = SURFACE_STYLE_FILL_AREA(#537063); +#537063 = FILL_AREA_STYLE('',(#537064)); +#537064 = FILL_AREA_STYLE_COLOUR('',#512538); +#537065 = CURVE_STYLE('',#537066,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537066 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537067 = STYLED_ITEM('color',(#537068),#74817); +#537068 = PRESENTATION_STYLE_ASSIGNMENT((#537069,#537074)); +#537069 = SURFACE_STYLE_USAGE(.BOTH.,#537070); +#537070 = SURFACE_SIDE_STYLE('',(#537071)); +#537071 = SURFACE_STYLE_FILL_AREA(#537072); +#537072 = FILL_AREA_STYLE('',(#537073)); +#537073 = FILL_AREA_STYLE_COLOUR('',#512501); +#537074 = CURVE_STYLE('',#537075,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537075 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537076 = STYLED_ITEM('color',(#537077),#74834); +#537077 = PRESENTATION_STYLE_ASSIGNMENT((#537078,#537083)); +#537078 = SURFACE_STYLE_USAGE(.BOTH.,#537079); +#537079 = SURFACE_SIDE_STYLE('',(#537080)); +#537080 = SURFACE_STYLE_FILL_AREA(#537081); +#537081 = FILL_AREA_STYLE('',(#537082)); +#537082 = FILL_AREA_STYLE_COLOUR('',#536902); +#537083 = CURVE_STYLE('',#537084,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537084 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537085 = STYLED_ITEM('color',(#537086),#74932); +#537086 = PRESENTATION_STYLE_ASSIGNMENT((#537087,#537092)); +#537087 = SURFACE_STYLE_USAGE(.BOTH.,#537088); +#537088 = SURFACE_SIDE_STYLE('',(#537089)); +#537089 = SURFACE_STYLE_FILL_AREA(#537090); +#537090 = FILL_AREA_STYLE('',(#537091)); +#537091 = FILL_AREA_STYLE_COLOUR('',#536902); +#537092 = CURVE_STYLE('',#537093,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537093 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537094 = STYLED_ITEM('color',(#537095),#74944); +#537095 = PRESENTATION_STYLE_ASSIGNMENT((#537096,#537101)); +#537096 = SURFACE_STYLE_USAGE(.BOTH.,#537097); +#537097 = SURFACE_SIDE_STYLE('',(#537098)); +#537098 = SURFACE_STYLE_FILL_AREA(#537099); +#537099 = FILL_AREA_STYLE('',(#537100)); +#537100 = FILL_AREA_STYLE_COLOUR('',#512538); +#537101 = CURVE_STYLE('',#537102,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537102 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537103 = STYLED_ITEM('color',(#537104),#74985); +#537104 = PRESENTATION_STYLE_ASSIGNMENT((#537105,#537110)); +#537105 = SURFACE_STYLE_USAGE(.BOTH.,#537106); +#537106 = SURFACE_SIDE_STYLE('',(#537107)); +#537107 = SURFACE_STYLE_FILL_AREA(#537108); +#537108 = FILL_AREA_STYLE('',(#537109)); +#537109 = FILL_AREA_STYLE_COLOUR('',#512538); +#537110 = CURVE_STYLE('',#537111,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537111 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537112 = STYLED_ITEM('color',(#537113),#75009); +#537113 = PRESENTATION_STYLE_ASSIGNMENT((#537114,#537119)); +#537114 = SURFACE_STYLE_USAGE(.BOTH.,#537115); +#537115 = SURFACE_SIDE_STYLE('',(#537116)); +#537116 = SURFACE_STYLE_FILL_AREA(#537117); +#537117 = FILL_AREA_STYLE('',(#537118)); +#537118 = FILL_AREA_STYLE_COLOUR('',#512538); +#537119 = CURVE_STYLE('',#537120,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537120 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537121 = STYLED_ITEM('color',(#537122),#75043); +#537122 = PRESENTATION_STYLE_ASSIGNMENT((#537123,#537128)); +#537123 = SURFACE_STYLE_USAGE(.BOTH.,#537124); +#537124 = SURFACE_SIDE_STYLE('',(#537125)); +#537125 = SURFACE_STYLE_FILL_AREA(#537126); +#537126 = FILL_AREA_STYLE('',(#537127)); +#537127 = FILL_AREA_STYLE_COLOUR('',#512538); +#537128 = CURVE_STYLE('',#537129,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537129 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537130 = STYLED_ITEM('color',(#537131),#75084); +#537131 = PRESENTATION_STYLE_ASSIGNMENT((#537132,#537137)); +#537132 = SURFACE_STYLE_USAGE(.BOTH.,#537133); +#537133 = SURFACE_SIDE_STYLE('',(#537134)); +#537134 = SURFACE_STYLE_FILL_AREA(#537135); +#537135 = FILL_AREA_STYLE('',(#537136)); +#537136 = FILL_AREA_STYLE_COLOUR('',#512538); +#537137 = CURVE_STYLE('',#537138,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537138 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537139 = STYLED_ITEM('color',(#537140),#75108); +#537140 = PRESENTATION_STYLE_ASSIGNMENT((#537141,#537146)); +#537141 = SURFACE_STYLE_USAGE(.BOTH.,#537142); +#537142 = SURFACE_SIDE_STYLE('',(#537143)); +#537143 = SURFACE_STYLE_FILL_AREA(#537144); +#537144 = FILL_AREA_STYLE('',(#537145)); +#537145 = FILL_AREA_STYLE_COLOUR('',#512538); +#537146 = CURVE_STYLE('',#537147,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537147 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537148 = STYLED_ITEM('color',(#537149),#75142); +#537149 = PRESENTATION_STYLE_ASSIGNMENT((#537150,#537155)); +#537150 = SURFACE_STYLE_USAGE(.BOTH.,#537151); +#537151 = SURFACE_SIDE_STYLE('',(#537152)); +#537152 = SURFACE_STYLE_FILL_AREA(#537153); +#537153 = FILL_AREA_STYLE('',(#537154)); +#537154 = FILL_AREA_STYLE_COLOUR('',#512501); +#537155 = CURVE_STYLE('',#537156,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537156 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537157 = STYLED_ITEM('color',(#537158),#75159); +#537158 = PRESENTATION_STYLE_ASSIGNMENT((#537159,#537164)); +#537159 = SURFACE_STYLE_USAGE(.BOTH.,#537160); +#537160 = SURFACE_SIDE_STYLE('',(#537161)); +#537161 = SURFACE_STYLE_FILL_AREA(#537162); +#537162 = FILL_AREA_STYLE('',(#537163)); +#537163 = FILL_AREA_STYLE_COLOUR('',#512501); +#537164 = CURVE_STYLE('',#537165,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537165 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537166 = STYLED_ITEM('color',(#537167),#75183); +#537167 = PRESENTATION_STYLE_ASSIGNMENT((#537168,#537173)); +#537168 = SURFACE_STYLE_USAGE(.BOTH.,#537169); +#537169 = SURFACE_SIDE_STYLE('',(#537170)); +#537170 = SURFACE_STYLE_FILL_AREA(#537171); +#537171 = FILL_AREA_STYLE('',(#537172)); +#537172 = FILL_AREA_STYLE_COLOUR('',#512501); +#537173 = CURVE_STYLE('',#537174,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537174 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537175 = STYLED_ITEM('color',(#537176),#75263); +#537176 = PRESENTATION_STYLE_ASSIGNMENT((#537177,#537182)); +#537177 = SURFACE_STYLE_USAGE(.BOTH.,#537178); +#537178 = SURFACE_SIDE_STYLE('',(#537179)); +#537179 = SURFACE_STYLE_FILL_AREA(#537180); +#537180 = FILL_AREA_STYLE('',(#537181)); +#537181 = FILL_AREA_STYLE_COLOUR('',#536902); +#537182 = CURVE_STYLE('',#537183,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537183 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537184 = STYLED_ITEM('color',(#537185),#75294); +#537185 = PRESENTATION_STYLE_ASSIGNMENT((#537186,#537191)); +#537186 = SURFACE_STYLE_USAGE(.BOTH.,#537187); +#537187 = SURFACE_SIDE_STYLE('',(#537188)); +#537188 = SURFACE_STYLE_FILL_AREA(#537189); +#537189 = FILL_AREA_STYLE('',(#537190)); +#537190 = FILL_AREA_STYLE_COLOUR('',#512501); +#537191 = CURVE_STYLE('',#537192,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537192 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537193 = STYLED_ITEM('color',(#537194),#75325); +#537194 = PRESENTATION_STYLE_ASSIGNMENT((#537195,#537200)); +#537195 = SURFACE_STYLE_USAGE(.BOTH.,#537196); +#537196 = SURFACE_SIDE_STYLE('',(#537197)); +#537197 = SURFACE_STYLE_FILL_AREA(#537198); +#537198 = FILL_AREA_STYLE('',(#537199)); +#537199 = FILL_AREA_STYLE_COLOUR('',#512501); +#537200 = CURVE_STYLE('',#537201,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537201 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537202 = STYLED_ITEM('color',(#537203),#75349); +#537203 = PRESENTATION_STYLE_ASSIGNMENT((#537204,#537209)); +#537204 = SURFACE_STYLE_USAGE(.BOTH.,#537205); +#537205 = SURFACE_SIDE_STYLE('',(#537206)); +#537206 = SURFACE_STYLE_FILL_AREA(#537207); +#537207 = FILL_AREA_STYLE('',(#537208)); +#537208 = FILL_AREA_STYLE_COLOUR('',#512501); +#537209 = CURVE_STYLE('',#537210,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537210 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537211 = STYLED_ITEM('color',(#537212),#75380); +#537212 = PRESENTATION_STYLE_ASSIGNMENT((#537213,#537218)); +#537213 = SURFACE_STYLE_USAGE(.BOTH.,#537214); +#537214 = SURFACE_SIDE_STYLE('',(#537215)); +#537215 = SURFACE_STYLE_FILL_AREA(#537216); +#537216 = FILL_AREA_STYLE('',(#537217)); +#537217 = FILL_AREA_STYLE_COLOUR('',#512501); +#537218 = CURVE_STYLE('',#537219,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537219 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537220 = STYLED_ITEM('color',(#537221),#75404); +#537221 = PRESENTATION_STYLE_ASSIGNMENT((#537222,#537227)); +#537222 = SURFACE_STYLE_USAGE(.BOTH.,#537223); +#537223 = SURFACE_SIDE_STYLE('',(#537224)); +#537224 = SURFACE_STYLE_FILL_AREA(#537225); +#537225 = FILL_AREA_STYLE('',(#537226)); +#537226 = FILL_AREA_STYLE_COLOUR('',#512501); +#537227 = CURVE_STYLE('',#537228,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537228 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537229 = STYLED_ITEM('color',(#537230),#75491); +#537230 = PRESENTATION_STYLE_ASSIGNMENT((#537231,#537236)); +#537231 = SURFACE_STYLE_USAGE(.BOTH.,#537232); +#537232 = SURFACE_SIDE_STYLE('',(#537233)); +#537233 = SURFACE_STYLE_FILL_AREA(#537234); +#537234 = FILL_AREA_STYLE('',(#537235)); +#537235 = FILL_AREA_STYLE_COLOUR('',#512501); +#537236 = CURVE_STYLE('',#537237,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537237 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537238 = STYLED_ITEM('color',(#537239),#75515); +#537239 = PRESENTATION_STYLE_ASSIGNMENT((#537240,#537245)); +#537240 = SURFACE_STYLE_USAGE(.BOTH.,#537241); +#537241 = SURFACE_SIDE_STYLE('',(#537242)); +#537242 = SURFACE_STYLE_FILL_AREA(#537243); +#537243 = FILL_AREA_STYLE('',(#537244)); +#537244 = FILL_AREA_STYLE_COLOUR('',#512501); +#537245 = CURVE_STYLE('',#537246,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537246 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537247 = STYLED_ITEM('color',(#537248),#75539); +#537248 = PRESENTATION_STYLE_ASSIGNMENT((#537249,#537254)); +#537249 = SURFACE_STYLE_USAGE(.BOTH.,#537250); +#537250 = SURFACE_SIDE_STYLE('',(#537251)); +#537251 = SURFACE_STYLE_FILL_AREA(#537252); +#537252 = FILL_AREA_STYLE('',(#537253)); +#537253 = FILL_AREA_STYLE_COLOUR('',#536902); +#537254 = CURVE_STYLE('',#537255,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537255 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537256 = STYLED_ITEM('color',(#537257),#75563); +#537257 = PRESENTATION_STYLE_ASSIGNMENT((#537258,#537263)); +#537258 = SURFACE_STYLE_USAGE(.BOTH.,#537259); +#537259 = SURFACE_SIDE_STYLE('',(#537260)); +#537260 = SURFACE_STYLE_FILL_AREA(#537261); +#537261 = FILL_AREA_STYLE('',(#537262)); +#537262 = FILL_AREA_STYLE_COLOUR('',#512538); +#537263 = CURVE_STYLE('',#537264,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537264 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537265 = STYLED_ITEM('color',(#537266),#75582); +#537266 = PRESENTATION_STYLE_ASSIGNMENT((#537267,#537272)); +#537267 = SURFACE_STYLE_USAGE(.BOTH.,#537268); +#537268 = SURFACE_SIDE_STYLE('',(#537269)); +#537269 = SURFACE_STYLE_FILL_AREA(#537270); +#537270 = FILL_AREA_STYLE('',(#537271)); +#537271 = FILL_AREA_STYLE_COLOUR('',#536902); +#537272 = CURVE_STYLE('',#537273,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537273 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537274 = STYLED_ITEM('color',(#537275),#75607); +#537275 = PRESENTATION_STYLE_ASSIGNMENT((#537276,#537281)); +#537276 = SURFACE_STYLE_USAGE(.BOTH.,#537277); +#537277 = SURFACE_SIDE_STYLE('',(#537278)); +#537278 = SURFACE_STYLE_FILL_AREA(#537279); +#537279 = FILL_AREA_STYLE('',(#537280)); +#537280 = FILL_AREA_STYLE_COLOUR('',#536902); +#537281 = CURVE_STYLE('',#537282,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537282 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537283 = STYLED_ITEM('color',(#537284),#75624); +#537284 = PRESENTATION_STYLE_ASSIGNMENT((#537285,#537290)); +#537285 = SURFACE_STYLE_USAGE(.BOTH.,#537286); +#537286 = SURFACE_SIDE_STYLE('',(#537287)); +#537287 = SURFACE_STYLE_FILL_AREA(#537288); +#537288 = FILL_AREA_STYLE('',(#537289)); +#537289 = FILL_AREA_STYLE_COLOUR('',#512501); +#537290 = CURVE_STYLE('',#537291,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537291 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537292 = STYLED_ITEM('color',(#537293),#75641); +#537293 = PRESENTATION_STYLE_ASSIGNMENT((#537294,#537299)); +#537294 = SURFACE_STYLE_USAGE(.BOTH.,#537295); +#537295 = SURFACE_SIDE_STYLE('',(#537296)); +#537296 = SURFACE_STYLE_FILL_AREA(#537297); +#537297 = FILL_AREA_STYLE('',(#537298)); +#537298 = FILL_AREA_STYLE_COLOUR('',#512501); +#537299 = CURVE_STYLE('',#537300,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537300 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537301 = STYLED_ITEM('color',(#537302),#75658); +#537302 = PRESENTATION_STYLE_ASSIGNMENT((#537303,#537308)); +#537303 = SURFACE_STYLE_USAGE(.BOTH.,#537304); +#537304 = SURFACE_SIDE_STYLE('',(#537305)); +#537305 = SURFACE_STYLE_FILL_AREA(#537306); +#537306 = FILL_AREA_STYLE('',(#537307)); +#537307 = FILL_AREA_STYLE_COLOUR('',#512501); +#537308 = CURVE_STYLE('',#537309,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537309 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537310 = STYLED_ITEM('color',(#537311),#75803); +#537311 = PRESENTATION_STYLE_ASSIGNMENT((#537312,#537317)); +#537312 = SURFACE_STYLE_USAGE(.BOTH.,#537313); +#537313 = SURFACE_SIDE_STYLE('',(#537314)); +#537314 = SURFACE_STYLE_FILL_AREA(#537315); +#537315 = FILL_AREA_STYLE('',(#537316)); +#537316 = FILL_AREA_STYLE_COLOUR('',#512501); +#537317 = CURVE_STYLE('',#537318,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537318 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537319 = STYLED_ITEM('color',(#537320),#75827); +#537320 = PRESENTATION_STYLE_ASSIGNMENT((#537321,#537326)); +#537321 = SURFACE_STYLE_USAGE(.BOTH.,#537322); +#537322 = SURFACE_SIDE_STYLE('',(#537323)); +#537323 = SURFACE_STYLE_FILL_AREA(#537324); +#537324 = FILL_AREA_STYLE('',(#537325)); +#537325 = FILL_AREA_STYLE_COLOUR('',#536902); +#537326 = CURVE_STYLE('',#537327,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537327 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537328 = STYLED_ITEM('color',(#537329),#75906); +#537329 = PRESENTATION_STYLE_ASSIGNMENT((#537330,#537335)); +#537330 = SURFACE_STYLE_USAGE(.BOTH.,#537331); +#537331 = SURFACE_SIDE_STYLE('',(#537332)); +#537332 = SURFACE_STYLE_FILL_AREA(#537333); +#537333 = FILL_AREA_STYLE('',(#537334)); +#537334 = FILL_AREA_STYLE_COLOUR('',#512501); +#537335 = CURVE_STYLE('',#537336,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537336 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537337 = STYLED_ITEM('color',(#537338),#75930); +#537338 = PRESENTATION_STYLE_ASSIGNMENT((#537339,#537344)); +#537339 = SURFACE_STYLE_USAGE(.BOTH.,#537340); +#537340 = SURFACE_SIDE_STYLE('',(#537341)); +#537341 = SURFACE_STYLE_FILL_AREA(#537342); +#537342 = FILL_AREA_STYLE('',(#537343)); +#537343 = FILL_AREA_STYLE_COLOUR('',#512538); +#537344 = CURVE_STYLE('',#537345,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537345 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537346 = STYLED_ITEM('color',(#537347),#75949); +#537347 = PRESENTATION_STYLE_ASSIGNMENT((#537348,#537353)); +#537348 = SURFACE_STYLE_USAGE(.BOTH.,#537349); +#537349 = SURFACE_SIDE_STYLE('',(#537350)); +#537350 = SURFACE_STYLE_FILL_AREA(#537351); +#537351 = FILL_AREA_STYLE('',(#537352)); +#537352 = FILL_AREA_STYLE_COLOUR('',#536902); +#537353 = CURVE_STYLE('',#537354,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537354 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537355 = STYLED_ITEM('color',(#537356),#75980); +#537356 = PRESENTATION_STYLE_ASSIGNMENT((#537357,#537362)); +#537357 = SURFACE_STYLE_USAGE(.BOTH.,#537358); +#537358 = SURFACE_SIDE_STYLE('',(#537359)); +#537359 = SURFACE_STYLE_FILL_AREA(#537360); +#537360 = FILL_AREA_STYLE('',(#537361)); +#537361 = FILL_AREA_STYLE_COLOUR('',#536902); +#537362 = CURVE_STYLE('',#537363,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537363 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537364 = STYLED_ITEM('color',(#537365),#76005); +#537365 = PRESENTATION_STYLE_ASSIGNMENT((#537366,#537371)); +#537366 = SURFACE_STYLE_USAGE(.BOTH.,#537367); +#537367 = SURFACE_SIDE_STYLE('',(#537368)); +#537368 = SURFACE_STYLE_FILL_AREA(#537369); +#537369 = FILL_AREA_STYLE('',(#537370)); +#537370 = FILL_AREA_STYLE_COLOUR('',#536902); +#537371 = CURVE_STYLE('',#537372,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537372 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537373 = STYLED_ITEM('color',(#537374),#76022); +#537374 = PRESENTATION_STYLE_ASSIGNMENT((#537375,#537380)); +#537375 = SURFACE_STYLE_USAGE(.BOTH.,#537376); +#537376 = SURFACE_SIDE_STYLE('',(#537377)); +#537377 = SURFACE_STYLE_FILL_AREA(#537378); +#537378 = FILL_AREA_STYLE('',(#537379)); +#537379 = FILL_AREA_STYLE_COLOUR('',#536902); +#537380 = CURVE_STYLE('',#537381,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537381 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537382 = STYLED_ITEM('color',(#537383),#76056); +#537383 = PRESENTATION_STYLE_ASSIGNMENT((#537384,#537389)); +#537384 = SURFACE_STYLE_USAGE(.BOTH.,#537385); +#537385 = SURFACE_SIDE_STYLE('',(#537386)); +#537386 = SURFACE_STYLE_FILL_AREA(#537387); +#537387 = FILL_AREA_STYLE('',(#537388)); +#537388 = FILL_AREA_STYLE_COLOUR('',#536902); +#537389 = CURVE_STYLE('',#537390,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537390 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537391 = STYLED_ITEM('color',(#537392),#76081); +#537392 = PRESENTATION_STYLE_ASSIGNMENT((#537393,#537398)); +#537393 = SURFACE_STYLE_USAGE(.BOTH.,#537394); +#537394 = SURFACE_SIDE_STYLE('',(#537395)); +#537395 = SURFACE_STYLE_FILL_AREA(#537396); +#537396 = FILL_AREA_STYLE('',(#537397)); +#537397 = FILL_AREA_STYLE_COLOUR('',#536902); +#537398 = CURVE_STYLE('',#537399,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537399 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537400 = STYLED_ITEM('color',(#537401),#76121); +#537401 = PRESENTATION_STYLE_ASSIGNMENT((#537402,#537407)); +#537402 = SURFACE_STYLE_USAGE(.BOTH.,#537403); +#537403 = SURFACE_SIDE_STYLE('',(#537404)); +#537404 = SURFACE_STYLE_FILL_AREA(#537405); +#537405 = FILL_AREA_STYLE('',(#537406)); +#537406 = FILL_AREA_STYLE_COLOUR('',#512501); +#537407 = CURVE_STYLE('',#537408,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537408 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537409 = STYLED_ITEM('color',(#537410),#76145); +#537410 = PRESENTATION_STYLE_ASSIGNMENT((#537411,#537416)); +#537411 = SURFACE_STYLE_USAGE(.BOTH.,#537412); +#537412 = SURFACE_SIDE_STYLE('',(#537413)); +#537413 = SURFACE_STYLE_FILL_AREA(#537414); +#537414 = FILL_AREA_STYLE('',(#537415)); +#537415 = FILL_AREA_STYLE_COLOUR('',#512538); +#537416 = CURVE_STYLE('',#537417,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537417 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537418 = STYLED_ITEM('color',(#537419),#76162); +#537419 = PRESENTATION_STYLE_ASSIGNMENT((#537420,#537425)); +#537420 = SURFACE_STYLE_USAGE(.BOTH.,#537421); +#537421 = SURFACE_SIDE_STYLE('',(#537422)); +#537422 = SURFACE_STYLE_FILL_AREA(#537423); +#537423 = FILL_AREA_STYLE('',(#537424)); +#537424 = FILL_AREA_STYLE_COLOUR('',#512538); +#537425 = CURVE_STYLE('',#537426,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537426 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537427 = STYLED_ITEM('color',(#537428),#76174); +#537428 = PRESENTATION_STYLE_ASSIGNMENT((#537429,#537434)); +#537429 = SURFACE_STYLE_USAGE(.BOTH.,#537430); +#537430 = SURFACE_SIDE_STYLE('',(#537431)); +#537431 = SURFACE_STYLE_FILL_AREA(#537432); +#537432 = FILL_AREA_STYLE('',(#537433)); +#537433 = FILL_AREA_STYLE_COLOUR('',#512538); +#537434 = CURVE_STYLE('',#537435,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537435 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537436 = STYLED_ITEM('color',(#537437),#76191); +#537437 = PRESENTATION_STYLE_ASSIGNMENT((#537438,#537443)); +#537438 = SURFACE_STYLE_USAGE(.BOTH.,#537439); +#537439 = SURFACE_SIDE_STYLE('',(#537440)); +#537440 = SURFACE_STYLE_FILL_AREA(#537441); +#537441 = FILL_AREA_STYLE('',(#537442)); +#537442 = FILL_AREA_STYLE_COLOUR('',#512538); +#537443 = CURVE_STYLE('',#537444,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537444 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537445 = STYLED_ITEM('color',(#537446),#76203); +#537446 = PRESENTATION_STYLE_ASSIGNMENT((#537447,#537452)); +#537447 = SURFACE_STYLE_USAGE(.BOTH.,#537448); +#537448 = SURFACE_SIDE_STYLE('',(#537449)); +#537449 = SURFACE_STYLE_FILL_AREA(#537450); +#537450 = FILL_AREA_STYLE('',(#537451)); +#537451 = FILL_AREA_STYLE_COLOUR('',#536902); +#537452 = CURVE_STYLE('',#537453,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537453 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537454 = STYLED_ITEM('color',(#537455),#76236); +#537455 = PRESENTATION_STYLE_ASSIGNMENT((#537456,#537461)); +#537456 = SURFACE_STYLE_USAGE(.BOTH.,#537457); +#537457 = SURFACE_SIDE_STYLE('',(#537458)); +#537458 = SURFACE_STYLE_FILL_AREA(#537459); +#537459 = FILL_AREA_STYLE('',(#537460)); +#537460 = FILL_AREA_STYLE_COLOUR('',#536902); +#537461 = CURVE_STYLE('',#537462,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537462 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537463 = STYLED_ITEM('color',(#537464),#76260); +#537464 = PRESENTATION_STYLE_ASSIGNMENT((#537465,#537470)); +#537465 = SURFACE_STYLE_USAGE(.BOTH.,#537466); +#537466 = SURFACE_SIDE_STYLE('',(#537467)); +#537467 = SURFACE_STYLE_FILL_AREA(#537468); +#537468 = FILL_AREA_STYLE('',(#537469)); +#537469 = FILL_AREA_STYLE_COLOUR('',#536902); +#537470 = CURVE_STYLE('',#537471,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537471 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537472 = STYLED_ITEM('color',(#537473),#76284); +#537473 = PRESENTATION_STYLE_ASSIGNMENT((#537474,#537479)); +#537474 = SURFACE_STYLE_USAGE(.BOTH.,#537475); +#537475 = SURFACE_SIDE_STYLE('',(#537476)); +#537476 = SURFACE_STYLE_FILL_AREA(#537477); +#537477 = FILL_AREA_STYLE('',(#537478)); +#537478 = FILL_AREA_STYLE_COLOUR('',#536902); +#537479 = CURVE_STYLE('',#537480,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537480 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537481 = STYLED_ITEM('color',(#537482),#76308); +#537482 = PRESENTATION_STYLE_ASSIGNMENT((#537483,#537488)); +#537483 = SURFACE_STYLE_USAGE(.BOTH.,#537484); +#537484 = SURFACE_SIDE_STYLE('',(#537485)); +#537485 = SURFACE_STYLE_FILL_AREA(#537486); +#537486 = FILL_AREA_STYLE('',(#537487)); +#537487 = FILL_AREA_STYLE_COLOUR('',#536902); +#537488 = CURVE_STYLE('',#537489,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537489 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537490 = STYLED_ITEM('color',(#537491),#76332); +#537491 = PRESENTATION_STYLE_ASSIGNMENT((#537492,#537497)); +#537492 = SURFACE_STYLE_USAGE(.BOTH.,#537493); +#537493 = SURFACE_SIDE_STYLE('',(#537494)); +#537494 = SURFACE_STYLE_FILL_AREA(#537495); +#537495 = FILL_AREA_STYLE('',(#537496)); +#537496 = FILL_AREA_STYLE_COLOUR('',#536902); +#537497 = CURVE_STYLE('',#537498,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537498 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537499 = STYLED_ITEM('color',(#537500),#76356); +#537500 = PRESENTATION_STYLE_ASSIGNMENT((#537501,#537506)); +#537501 = SURFACE_STYLE_USAGE(.BOTH.,#537502); +#537502 = SURFACE_SIDE_STYLE('',(#537503)); +#537503 = SURFACE_STYLE_FILL_AREA(#537504); +#537504 = FILL_AREA_STYLE('',(#537505)); +#537505 = FILL_AREA_STYLE_COLOUR('',#536902); +#537506 = CURVE_STYLE('',#537507,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537507 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537508 = STYLED_ITEM('color',(#537509),#76373); +#537509 = PRESENTATION_STYLE_ASSIGNMENT((#537510,#537515)); +#537510 = SURFACE_STYLE_USAGE(.BOTH.,#537511); +#537511 = SURFACE_SIDE_STYLE('',(#537512)); +#537512 = SURFACE_STYLE_FILL_AREA(#537513); +#537513 = FILL_AREA_STYLE('',(#537514)); +#537514 = FILL_AREA_STYLE_COLOUR('',#536902); +#537515 = CURVE_STYLE('',#537516,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537516 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537517 = STYLED_ITEM('color',(#537518),#76391); +#537518 = PRESENTATION_STYLE_ASSIGNMENT((#537519,#537524)); +#537519 = SURFACE_STYLE_USAGE(.BOTH.,#537520); +#537520 = SURFACE_SIDE_STYLE('',(#537521)); +#537521 = SURFACE_STYLE_FILL_AREA(#537522); +#537522 = FILL_AREA_STYLE('',(#537523)); +#537523 = FILL_AREA_STYLE_COLOUR('',#536902); +#537524 = CURVE_STYLE('',#537525,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537525 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537526 = STYLED_ITEM('color',(#537527),#76409); +#537527 = PRESENTATION_STYLE_ASSIGNMENT((#537528,#537533)); +#537528 = SURFACE_STYLE_USAGE(.BOTH.,#537529); +#537529 = SURFACE_SIDE_STYLE('',(#537530)); +#537530 = SURFACE_STYLE_FILL_AREA(#537531); +#537531 = FILL_AREA_STYLE('',(#537532)); +#537532 = FILL_AREA_STYLE_COLOUR('',#536902); +#537533 = CURVE_STYLE('',#537534,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537535 = STYLED_ITEM('color',(#537536),#76434); +#537536 = PRESENTATION_STYLE_ASSIGNMENT((#537537,#537542)); +#537537 = SURFACE_STYLE_USAGE(.BOTH.,#537538); +#537538 = SURFACE_SIDE_STYLE('',(#537539)); +#537539 = SURFACE_STYLE_FILL_AREA(#537540); +#537540 = FILL_AREA_STYLE('',(#537541)); +#537541 = FILL_AREA_STYLE_COLOUR('',#512501); +#537542 = CURVE_STYLE('',#537543,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537543 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537544 = STYLED_ITEM('color',(#537545),#76445); +#537545 = PRESENTATION_STYLE_ASSIGNMENT((#537546,#537551)); +#537546 = SURFACE_STYLE_USAGE(.BOTH.,#537547); +#537547 = SURFACE_SIDE_STYLE('',(#537548)); +#537548 = SURFACE_STYLE_FILL_AREA(#537549); +#537549 = FILL_AREA_STYLE('',(#537550)); +#537550 = FILL_AREA_STYLE_COLOUR('',#512501); +#537551 = CURVE_STYLE('',#537552,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537552 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537553 = STYLED_ITEM('color',(#537554),#76456); +#537554 = PRESENTATION_STYLE_ASSIGNMENT((#537555,#537560)); +#537555 = SURFACE_STYLE_USAGE(.BOTH.,#537556); +#537556 = SURFACE_SIDE_STYLE('',(#537557)); +#537557 = SURFACE_STYLE_FILL_AREA(#537558); +#537558 = FILL_AREA_STYLE('',(#537559)); +#537559 = FILL_AREA_STYLE_COLOUR('',#536902); +#537560 = CURVE_STYLE('',#537561,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537561 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537562 = STYLED_ITEM('color',(#537563),#76490); +#537563 = PRESENTATION_STYLE_ASSIGNMENT((#537564,#537569)); +#537564 = SURFACE_STYLE_USAGE(.BOTH.,#537565); +#537565 = SURFACE_SIDE_STYLE('',(#537566)); +#537566 = SURFACE_STYLE_FILL_AREA(#537567); +#537567 = FILL_AREA_STYLE('',(#537568)); +#537568 = FILL_AREA_STYLE_COLOUR('',#536902); +#537569 = CURVE_STYLE('',#537570,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537570 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537571 = STYLED_ITEM('color',(#537572),#76514); +#537572 = PRESENTATION_STYLE_ASSIGNMENT((#537573,#537578)); +#537573 = SURFACE_STYLE_USAGE(.BOTH.,#537574); +#537574 = SURFACE_SIDE_STYLE('',(#537575)); +#537575 = SURFACE_STYLE_FILL_AREA(#537576); +#537576 = FILL_AREA_STYLE('',(#537577)); +#537577 = FILL_AREA_STYLE_COLOUR('',#536902); +#537578 = CURVE_STYLE('',#537579,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537579 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537580 = STYLED_ITEM('color',(#537581),#76538); +#537581 = PRESENTATION_STYLE_ASSIGNMENT((#537582,#537587)); +#537582 = SURFACE_STYLE_USAGE(.BOTH.,#537583); +#537583 = SURFACE_SIDE_STYLE('',(#537584)); +#537584 = SURFACE_STYLE_FILL_AREA(#537585); +#537585 = FILL_AREA_STYLE('',(#537586)); +#537586 = FILL_AREA_STYLE_COLOUR('',#536902); +#537587 = CURVE_STYLE('',#537588,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537588 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537589 = STYLED_ITEM('color',(#537590),#76562); +#537590 = PRESENTATION_STYLE_ASSIGNMENT((#537591,#537596)); +#537591 = SURFACE_STYLE_USAGE(.BOTH.,#537592); +#537592 = SURFACE_SIDE_STYLE('',(#537593)); +#537593 = SURFACE_STYLE_FILL_AREA(#537594); +#537594 = FILL_AREA_STYLE('',(#537595)); +#537595 = FILL_AREA_STYLE_COLOUR('',#536902); +#537596 = CURVE_STYLE('',#537597,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537597 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537598 = STYLED_ITEM('color',(#537599),#76586); +#537599 = PRESENTATION_STYLE_ASSIGNMENT((#537600,#537605)); +#537600 = SURFACE_STYLE_USAGE(.BOTH.,#537601); +#537601 = SURFACE_SIDE_STYLE('',(#537602)); +#537602 = SURFACE_STYLE_FILL_AREA(#537603); +#537603 = FILL_AREA_STYLE('',(#537604)); +#537604 = FILL_AREA_STYLE_COLOUR('',#536902); +#537605 = CURVE_STYLE('',#537606,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537606 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537607 = STYLED_ITEM('color',(#537608),#76610); +#537608 = PRESENTATION_STYLE_ASSIGNMENT((#537609,#537614)); +#537609 = SURFACE_STYLE_USAGE(.BOTH.,#537610); +#537610 = SURFACE_SIDE_STYLE('',(#537611)); +#537611 = SURFACE_STYLE_FILL_AREA(#537612); +#537612 = FILL_AREA_STYLE('',(#537613)); +#537613 = FILL_AREA_STYLE_COLOUR('',#536902); +#537614 = CURVE_STYLE('',#537615,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537615 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537616 = STYLED_ITEM('color',(#537617),#76634); +#537617 = PRESENTATION_STYLE_ASSIGNMENT((#537618,#537623)); +#537618 = SURFACE_STYLE_USAGE(.BOTH.,#537619); +#537619 = SURFACE_SIDE_STYLE('',(#537620)); +#537620 = SURFACE_STYLE_FILL_AREA(#537621); +#537621 = FILL_AREA_STYLE('',(#537622)); +#537622 = FILL_AREA_STYLE_COLOUR('',#536902); +#537623 = CURVE_STYLE('',#537624,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537624 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537625 = STYLED_ITEM('color',(#537626),#76652); +#537626 = PRESENTATION_STYLE_ASSIGNMENT((#537627,#537632)); +#537627 = SURFACE_STYLE_USAGE(.BOTH.,#537628); +#537628 = SURFACE_SIDE_STYLE('',(#537629)); +#537629 = SURFACE_STYLE_FILL_AREA(#537630); +#537630 = FILL_AREA_STYLE('',(#537631)); +#537631 = FILL_AREA_STYLE_COLOUR('',#512501); +#537632 = CURVE_STYLE('',#537633,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537633 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537634 = STYLED_ITEM('color',(#537635),#76685); +#537635 = PRESENTATION_STYLE_ASSIGNMENT((#537636,#537641)); +#537636 = SURFACE_STYLE_USAGE(.BOTH.,#537637); +#537637 = SURFACE_SIDE_STYLE('',(#537638)); +#537638 = SURFACE_STYLE_FILL_AREA(#537639); +#537639 = FILL_AREA_STYLE('',(#537640)); +#537640 = FILL_AREA_STYLE_COLOUR('',#512501); +#537641 = CURVE_STYLE('',#537642,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537642 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537643 = OVER_RIDING_STYLED_ITEM('overriding color',(#537644),#76825, + #537634); +#537644 = PRESENTATION_STYLE_ASSIGNMENT((#537645,#537650)); +#537645 = SURFACE_STYLE_USAGE(.BOTH.,#537646); +#537646 = SURFACE_SIDE_STYLE('',(#537647)); +#537647 = SURFACE_STYLE_FILL_AREA(#537648); +#537648 = FILL_AREA_STYLE('',(#537649)); +#537649 = FILL_AREA_STYLE_COLOUR('',#512538); +#537650 = CURVE_STYLE('',#537651,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537651 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537652 = OVER_RIDING_STYLED_ITEM('overriding color',(#537653),#76833, + #537634); +#537653 = PRESENTATION_STYLE_ASSIGNMENT((#537654,#537659)); +#537654 = SURFACE_STYLE_USAGE(.BOTH.,#537655); +#537655 = SURFACE_SIDE_STYLE('',(#537656)); +#537656 = SURFACE_STYLE_FILL_AREA(#537657); +#537657 = FILL_AREA_STYLE('',(#537658)); +#537658 = FILL_AREA_STYLE_COLOUR('',#512538); +#537659 = CURVE_STYLE('',#537660,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537660 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537661 = OVER_RIDING_STYLED_ITEM('overriding color',(#537662),#76841, + #537634); +#537662 = PRESENTATION_STYLE_ASSIGNMENT((#537663,#537668)); +#537663 = SURFACE_STYLE_USAGE(.BOTH.,#537664); +#537664 = SURFACE_SIDE_STYLE('',(#537665)); +#537665 = SURFACE_STYLE_FILL_AREA(#537666); +#537666 = FILL_AREA_STYLE('',(#537667)); +#537667 = FILL_AREA_STYLE_COLOUR('',#512538); +#537668 = CURVE_STYLE('',#537669,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537669 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537670 = OVER_RIDING_STYLED_ITEM('overriding color',(#537671),#76880, + #537634); +#537671 = PRESENTATION_STYLE_ASSIGNMENT((#537672,#537677)); +#537672 = SURFACE_STYLE_USAGE(.BOTH.,#537673); +#537673 = SURFACE_SIDE_STYLE('',(#537674)); +#537674 = SURFACE_STYLE_FILL_AREA(#537675); +#537675 = FILL_AREA_STYLE('',(#537676)); +#537676 = FILL_AREA_STYLE_COLOUR('',#512538); +#537677 = CURVE_STYLE('',#537678,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537678 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537679 = OVER_RIDING_STYLED_ITEM('overriding color',(#537680),#76888, + #537634); +#537680 = PRESENTATION_STYLE_ASSIGNMENT((#537681,#537686)); +#537681 = SURFACE_STYLE_USAGE(.BOTH.,#537682); +#537682 = SURFACE_SIDE_STYLE('',(#537683)); +#537683 = SURFACE_STYLE_FILL_AREA(#537684); +#537684 = FILL_AREA_STYLE('',(#537685)); +#537685 = FILL_AREA_STYLE_COLOUR('',#512538); +#537686 = CURVE_STYLE('',#537687,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537687 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537688 = OVER_RIDING_STYLED_ITEM('overriding color',(#537689),#76896, + #537634); +#537689 = PRESENTATION_STYLE_ASSIGNMENT((#537690,#537695)); +#537690 = SURFACE_STYLE_USAGE(.BOTH.,#537691); +#537691 = SURFACE_SIDE_STYLE('',(#537692)); +#537692 = SURFACE_STYLE_FILL_AREA(#537693); +#537693 = FILL_AREA_STYLE('',(#537694)); +#537694 = FILL_AREA_STYLE_COLOUR('',#512538); +#537695 = CURVE_STYLE('',#537696,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537696 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537697 = STYLED_ITEM('color',(#537698),#76922); +#537698 = PRESENTATION_STYLE_ASSIGNMENT((#537699,#537704)); +#537699 = SURFACE_STYLE_USAGE(.BOTH.,#537700); +#537700 = SURFACE_SIDE_STYLE('',(#537701)); +#537701 = SURFACE_STYLE_FILL_AREA(#537702); +#537702 = FILL_AREA_STYLE('',(#537703)); +#537703 = FILL_AREA_STYLE_COLOUR('',#512501); +#537704 = CURVE_STYLE('',#537705,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537705 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537706 = STYLED_ITEM('color',(#537707),#76939); +#537707 = PRESENTATION_STYLE_ASSIGNMENT((#537708,#537713)); +#537708 = SURFACE_STYLE_USAGE(.BOTH.,#537709); +#537709 = SURFACE_SIDE_STYLE('',(#537710)); +#537710 = SURFACE_STYLE_FILL_AREA(#537711); +#537711 = FILL_AREA_STYLE('',(#537712)); +#537712 = FILL_AREA_STYLE_COLOUR('',#512538); +#537713 = CURVE_STYLE('',#537714,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537714 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537715 = STYLED_ITEM('color',(#537716),#76956); +#537716 = PRESENTATION_STYLE_ASSIGNMENT((#537717,#537722)); +#537717 = SURFACE_STYLE_USAGE(.BOTH.,#537718); +#537718 = SURFACE_SIDE_STYLE('',(#537719)); +#537719 = SURFACE_STYLE_FILL_AREA(#537720); +#537720 = FILL_AREA_STYLE('',(#537721)); +#537721 = FILL_AREA_STYLE_COLOUR('',#512501); +#537722 = CURVE_STYLE('',#537723,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537723 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537724 = STYLED_ITEM('color',(#537725),#76973); +#537725 = PRESENTATION_STYLE_ASSIGNMENT((#537726,#537731)); +#537726 = SURFACE_STYLE_USAGE(.BOTH.,#537727); +#537727 = SURFACE_SIDE_STYLE('',(#537728)); +#537728 = SURFACE_STYLE_FILL_AREA(#537729); +#537729 = FILL_AREA_STYLE('',(#537730)); +#537730 = FILL_AREA_STYLE_COLOUR('',#512501); +#537731 = CURVE_STYLE('',#537732,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537732 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537733 = STYLED_ITEM('color',(#537734),#76990); +#537734 = PRESENTATION_STYLE_ASSIGNMENT((#537735,#537740)); +#537735 = SURFACE_STYLE_USAGE(.BOTH.,#537736); +#537736 = SURFACE_SIDE_STYLE('',(#537737)); +#537737 = SURFACE_STYLE_FILL_AREA(#537738); +#537738 = FILL_AREA_STYLE('',(#537739)); +#537739 = FILL_AREA_STYLE_COLOUR('',#512538); +#537740 = CURVE_STYLE('',#537741,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537741 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537742 = STYLED_ITEM('color',(#537743),#77007); +#537743 = PRESENTATION_STYLE_ASSIGNMENT((#537744,#537749)); +#537744 = SURFACE_STYLE_USAGE(.BOTH.,#537745); +#537745 = SURFACE_SIDE_STYLE('',(#537746)); +#537746 = SURFACE_STYLE_FILL_AREA(#537747); +#537747 = FILL_AREA_STYLE('',(#537748)); +#537748 = FILL_AREA_STYLE_COLOUR('',#512501); +#537749 = CURVE_STYLE('',#537750,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537750 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537751 = STYLED_ITEM('color',(#537752),#77024); +#537752 = PRESENTATION_STYLE_ASSIGNMENT((#537753,#537758)); +#537753 = SURFACE_STYLE_USAGE(.BOTH.,#537754); +#537754 = SURFACE_SIDE_STYLE('',(#537755)); +#537755 = SURFACE_STYLE_FILL_AREA(#537756); +#537756 = FILL_AREA_STYLE('',(#537757)); +#537757 = FILL_AREA_STYLE_COLOUR('',#512501); +#537758 = CURVE_STYLE('',#537759,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537759 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537760 = STYLED_ITEM('color',(#537761),#77037); +#537761 = PRESENTATION_STYLE_ASSIGNMENT((#537762,#537767)); +#537762 = SURFACE_STYLE_USAGE(.BOTH.,#537763); +#537763 = SURFACE_SIDE_STYLE('',(#537764)); +#537764 = SURFACE_STYLE_FILL_AREA(#537765); +#537765 = FILL_AREA_STYLE('',(#537766)); +#537766 = FILL_AREA_STYLE_COLOUR('',#536902); +#537767 = CURVE_STYLE('',#537768,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537768 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537769 = STYLED_ITEM('color',(#537770),#77054); +#537770 = PRESENTATION_STYLE_ASSIGNMENT((#537771,#537776)); +#537771 = SURFACE_STYLE_USAGE(.BOTH.,#537772); +#537772 = SURFACE_SIDE_STYLE('',(#537773)); +#537773 = SURFACE_STYLE_FILL_AREA(#537774); +#537774 = FILL_AREA_STYLE('',(#537775)); +#537775 = FILL_AREA_STYLE_COLOUR('',#536902); +#537776 = CURVE_STYLE('',#537777,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537777 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537778 = STYLED_ITEM('color',(#537779),#77071); +#537779 = PRESENTATION_STYLE_ASSIGNMENT((#537780,#537785)); +#537780 = SURFACE_STYLE_USAGE(.BOTH.,#537781); +#537781 = SURFACE_SIDE_STYLE('',(#537782)); +#537782 = SURFACE_STYLE_FILL_AREA(#537783); +#537783 = FILL_AREA_STYLE('',(#537784)); +#537784 = FILL_AREA_STYLE_COLOUR('',#536902); +#537785 = CURVE_STYLE('',#537786,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537786 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537787 = STYLED_ITEM('color',(#537788),#77083); +#537788 = PRESENTATION_STYLE_ASSIGNMENT((#537789,#537794)); +#537789 = SURFACE_STYLE_USAGE(.BOTH.,#537790); +#537790 = SURFACE_SIDE_STYLE('',(#537791)); +#537791 = SURFACE_STYLE_FILL_AREA(#537792); +#537792 = FILL_AREA_STYLE('',(#537793)); +#537793 = FILL_AREA_STYLE_COLOUR('',#512501); +#537794 = CURVE_STYLE('',#537795,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537795 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537796 = STYLED_ITEM('color',(#537797),#77100); +#537797 = PRESENTATION_STYLE_ASSIGNMENT((#537798,#537803)); +#537798 = SURFACE_STYLE_USAGE(.BOTH.,#537799); +#537799 = SURFACE_SIDE_STYLE('',(#537800)); +#537800 = SURFACE_STYLE_FILL_AREA(#537801); +#537801 = FILL_AREA_STYLE('',(#537802)); +#537802 = FILL_AREA_STYLE_COLOUR('',#536902); +#537803 = CURVE_STYLE('',#537804,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537804 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537805 = STYLED_ITEM('color',(#537806),#77148); +#537806 = PRESENTATION_STYLE_ASSIGNMENT((#537807,#537812)); +#537807 = SURFACE_STYLE_USAGE(.BOTH.,#537808); +#537808 = SURFACE_SIDE_STYLE('',(#537809)); +#537809 = SURFACE_STYLE_FILL_AREA(#537810); +#537810 = FILL_AREA_STYLE('',(#537811)); +#537811 = FILL_AREA_STYLE_COLOUR('',#536902); +#537812 = CURVE_STYLE('',#537813,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537813 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537814 = STYLED_ITEM('color',(#537815),#77165); +#537815 = PRESENTATION_STYLE_ASSIGNMENT((#537816,#537821)); +#537816 = SURFACE_STYLE_USAGE(.BOTH.,#537817); +#537817 = SURFACE_SIDE_STYLE('',(#537818)); +#537818 = SURFACE_STYLE_FILL_AREA(#537819); +#537819 = FILL_AREA_STYLE('',(#537820)); +#537820 = FILL_AREA_STYLE_COLOUR('',#536902); +#537821 = CURVE_STYLE('',#537822,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537822 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537823 = STYLED_ITEM('color',(#537824),#77416); +#537824 = PRESENTATION_STYLE_ASSIGNMENT((#537825,#537830)); +#537825 = SURFACE_STYLE_USAGE(.BOTH.,#537826); +#537826 = SURFACE_SIDE_STYLE('',(#537827)); +#537827 = SURFACE_STYLE_FILL_AREA(#537828); +#537828 = FILL_AREA_STYLE('',(#537829)); +#537829 = FILL_AREA_STYLE_COLOUR('',#512501); +#537830 = CURVE_STYLE('',#537831,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537831 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537832 = STYLED_ITEM('color',(#537833),#77433); +#537833 = PRESENTATION_STYLE_ASSIGNMENT((#537834,#537839)); +#537834 = SURFACE_STYLE_USAGE(.BOTH.,#537835); +#537835 = SURFACE_SIDE_STYLE('',(#537836)); +#537836 = SURFACE_STYLE_FILL_AREA(#537837); +#537837 = FILL_AREA_STYLE('',(#537838)); +#537838 = FILL_AREA_STYLE_COLOUR('',#536902); +#537839 = CURVE_STYLE('',#537840,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537840 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537841 = STYLED_ITEM('color',(#537842),#77457); +#537842 = PRESENTATION_STYLE_ASSIGNMENT((#537843,#537848)); +#537843 = SURFACE_STYLE_USAGE(.BOTH.,#537844); +#537844 = SURFACE_SIDE_STYLE('',(#537845)); +#537845 = SURFACE_STYLE_FILL_AREA(#537846); +#537846 = FILL_AREA_STYLE('',(#537847)); +#537847 = FILL_AREA_STYLE_COLOUR('',#512501); +#537848 = CURVE_STYLE('',#537849,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537849 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537850 = STYLED_ITEM('color',(#537851),#77523); +#537851 = PRESENTATION_STYLE_ASSIGNMENT((#537852,#537857)); +#537852 = SURFACE_STYLE_USAGE(.BOTH.,#537853); +#537853 = SURFACE_SIDE_STYLE('',(#537854)); +#537854 = SURFACE_STYLE_FILL_AREA(#537855); +#537855 = FILL_AREA_STYLE('',(#537856)); +#537856 = FILL_AREA_STYLE_COLOUR('',#512538); +#537857 = CURVE_STYLE('',#537858,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537858 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537859 = STYLED_ITEM('color',(#537860),#77564); +#537860 = PRESENTATION_STYLE_ASSIGNMENT((#537861,#537866)); +#537861 = SURFACE_STYLE_USAGE(.BOTH.,#537862); +#537862 = SURFACE_SIDE_STYLE('',(#537863)); +#537863 = SURFACE_STYLE_FILL_AREA(#537864); +#537864 = FILL_AREA_STYLE('',(#537865)); +#537865 = FILL_AREA_STYLE_COLOUR('',#512538); +#537866 = CURVE_STYLE('',#537867,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537867 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537868 = STYLED_ITEM('color',(#537869),#77588); +#537869 = PRESENTATION_STYLE_ASSIGNMENT((#537870,#537875)); +#537870 = SURFACE_STYLE_USAGE(.BOTH.,#537871); +#537871 = SURFACE_SIDE_STYLE('',(#537872)); +#537872 = SURFACE_STYLE_FILL_AREA(#537873); +#537873 = FILL_AREA_STYLE('',(#537874)); +#537874 = FILL_AREA_STYLE_COLOUR('',#512538); +#537875 = CURVE_STYLE('',#537876,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537876 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537877 = STYLED_ITEM('color',(#537878),#77622); +#537878 = PRESENTATION_STYLE_ASSIGNMENT((#537879,#537884)); +#537879 = SURFACE_STYLE_USAGE(.BOTH.,#537880); +#537880 = SURFACE_SIDE_STYLE('',(#537881)); +#537881 = SURFACE_STYLE_FILL_AREA(#537882); +#537882 = FILL_AREA_STYLE('',(#537883)); +#537883 = FILL_AREA_STYLE_COLOUR('',#512538); +#537884 = CURVE_STYLE('',#537885,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537885 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537886 = STYLED_ITEM('color',(#537887),#77663); +#537887 = PRESENTATION_STYLE_ASSIGNMENT((#537888,#537893)); +#537888 = SURFACE_STYLE_USAGE(.BOTH.,#537889); +#537889 = SURFACE_SIDE_STYLE('',(#537890)); +#537890 = SURFACE_STYLE_FILL_AREA(#537891); +#537891 = FILL_AREA_STYLE('',(#537892)); +#537892 = FILL_AREA_STYLE_COLOUR('',#512538); +#537893 = CURVE_STYLE('',#537894,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537894 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537895 = STYLED_ITEM('color',(#537896),#77687); +#537896 = PRESENTATION_STYLE_ASSIGNMENT((#537897,#537902)); +#537897 = SURFACE_STYLE_USAGE(.BOTH.,#537898); +#537898 = SURFACE_SIDE_STYLE('',(#537899)); +#537899 = SURFACE_STYLE_FILL_AREA(#537900); +#537900 = FILL_AREA_STYLE('',(#537901)); +#537901 = FILL_AREA_STYLE_COLOUR('',#512538); +#537902 = CURVE_STYLE('',#537903,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537903 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537904 = STYLED_ITEM('color',(#537905),#77721); +#537905 = PRESENTATION_STYLE_ASSIGNMENT((#537906,#537911)); +#537906 = SURFACE_STYLE_USAGE(.BOTH.,#537907); +#537907 = SURFACE_SIDE_STYLE('',(#537908)); +#537908 = SURFACE_STYLE_FILL_AREA(#537909); +#537909 = FILL_AREA_STYLE('',(#537910)); +#537910 = FILL_AREA_STYLE_COLOUR('',#512501); +#537911 = CURVE_STYLE('',#537912,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537912 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537913 = STYLED_ITEM('color',(#537914),#77738); +#537914 = PRESENTATION_STYLE_ASSIGNMENT((#537915,#537920)); +#537915 = SURFACE_STYLE_USAGE(.BOTH.,#537916); +#537916 = SURFACE_SIDE_STYLE('',(#537917)); +#537917 = SURFACE_STYLE_FILL_AREA(#537918); +#537918 = FILL_AREA_STYLE('',(#537919)); +#537919 = FILL_AREA_STYLE_COLOUR('',#512501); +#537920 = CURVE_STYLE('',#537921,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537921 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537922 = STYLED_ITEM('color',(#537923),#77811); +#537923 = PRESENTATION_STYLE_ASSIGNMENT((#537924,#537929)); +#537924 = SURFACE_STYLE_USAGE(.BOTH.,#537925); +#537925 = SURFACE_SIDE_STYLE('',(#537926)); +#537926 = SURFACE_STYLE_FILL_AREA(#537927); +#537927 = FILL_AREA_STYLE('',(#537928)); +#537928 = FILL_AREA_STYLE_COLOUR('',#536902); +#537929 = CURVE_STYLE('',#537930,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537930 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537931 = STYLED_ITEM('color',(#537932),#77842); +#537932 = PRESENTATION_STYLE_ASSIGNMENT((#537933,#537938)); +#537933 = SURFACE_STYLE_USAGE(.BOTH.,#537934); +#537934 = SURFACE_SIDE_STYLE('',(#537935)); +#537935 = SURFACE_STYLE_FILL_AREA(#537936); +#537936 = FILL_AREA_STYLE('',(#537937)); +#537937 = FILL_AREA_STYLE_COLOUR('',#512501); +#537938 = CURVE_STYLE('',#537939,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537939 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537940 = STYLED_ITEM('color',(#537941),#77873); +#537941 = PRESENTATION_STYLE_ASSIGNMENT((#537942,#537947)); +#537942 = SURFACE_STYLE_USAGE(.BOTH.,#537943); +#537943 = SURFACE_SIDE_STYLE('',(#537944)); +#537944 = SURFACE_STYLE_FILL_AREA(#537945); +#537945 = FILL_AREA_STYLE('',(#537946)); +#537946 = FILL_AREA_STYLE_COLOUR('',#512501); +#537947 = CURVE_STYLE('',#537948,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537948 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537949 = STYLED_ITEM('color',(#537950),#77897); +#537950 = PRESENTATION_STYLE_ASSIGNMENT((#537951,#537956)); +#537951 = SURFACE_STYLE_USAGE(.BOTH.,#537952); +#537952 = SURFACE_SIDE_STYLE('',(#537953)); +#537953 = SURFACE_STYLE_FILL_AREA(#537954); +#537954 = FILL_AREA_STYLE('',(#537955)); +#537955 = FILL_AREA_STYLE_COLOUR('',#512501); +#537956 = CURVE_STYLE('',#537957,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537957 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537958 = STYLED_ITEM('color',(#537959),#77928); +#537959 = PRESENTATION_STYLE_ASSIGNMENT((#537960,#537965)); +#537960 = SURFACE_STYLE_USAGE(.BOTH.,#537961); +#537961 = SURFACE_SIDE_STYLE('',(#537962)); +#537962 = SURFACE_STYLE_FILL_AREA(#537963); +#537963 = FILL_AREA_STYLE('',(#537964)); +#537964 = FILL_AREA_STYLE_COLOUR('',#512501); +#537965 = CURVE_STYLE('',#537966,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#537966 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537967 = STYLED_ITEM('color',(#537968),#77952); +#537968 = PRESENTATION_STYLE_ASSIGNMENT((#537969,#537974)); +#537969 = SURFACE_STYLE_USAGE(.BOTH.,#537970); +#537970 = SURFACE_SIDE_STYLE('',(#537971)); +#537971 = SURFACE_STYLE_FILL_AREA(#537972); +#537972 = FILL_AREA_STYLE('',(#537973)); +#537973 = FILL_AREA_STYLE_COLOUR('',#512538); +#537974 = CURVE_STYLE('',#537975,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537975 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537976 = STYLED_ITEM('color',(#537977),#77971); +#537977 = PRESENTATION_STYLE_ASSIGNMENT((#537978,#537983)); +#537978 = SURFACE_STYLE_USAGE(.BOTH.,#537979); +#537979 = SURFACE_SIDE_STYLE('',(#537980)); +#537980 = SURFACE_STYLE_FILL_AREA(#537981); +#537981 = FILL_AREA_STYLE('',(#537982)); +#537982 = FILL_AREA_STYLE_COLOUR('',#512538); +#537983 = CURVE_STYLE('',#537984,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#537984 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537985 = STYLED_ITEM('color',(#537986),#77990); +#537986 = PRESENTATION_STYLE_ASSIGNMENT((#537987,#537992)); +#537987 = SURFACE_STYLE_USAGE(.BOTH.,#537988); +#537988 = SURFACE_SIDE_STYLE('',(#537989)); +#537989 = SURFACE_STYLE_FILL_AREA(#537990); +#537990 = FILL_AREA_STYLE('',(#537991)); +#537991 = FILL_AREA_STYLE_COLOUR('',#536902); +#537992 = CURVE_STYLE('',#537993,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#537993 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#537994 = STYLED_ITEM('color',(#537995),#78007); +#537995 = PRESENTATION_STYLE_ASSIGNMENT((#537996,#538001)); +#537996 = SURFACE_STYLE_USAGE(.BOTH.,#537997); +#537997 = SURFACE_SIDE_STYLE('',(#537998)); +#537998 = SURFACE_STYLE_FILL_AREA(#537999); +#537999 = FILL_AREA_STYLE('',(#538000)); +#538000 = FILL_AREA_STYLE_COLOUR('',#536902); +#538001 = CURVE_STYLE('',#538002,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538002 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538003 = STYLED_ITEM('color',(#538004),#78024); +#538004 = PRESENTATION_STYLE_ASSIGNMENT((#538005,#538010)); +#538005 = SURFACE_STYLE_USAGE(.BOTH.,#538006); +#538006 = SURFACE_SIDE_STYLE('',(#538007)); +#538007 = SURFACE_STYLE_FILL_AREA(#538008); +#538008 = FILL_AREA_STYLE('',(#538009)); +#538009 = FILL_AREA_STYLE_COLOUR('',#536902); +#538010 = CURVE_STYLE('',#538011,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538011 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538012 = STYLED_ITEM('color',(#538013),#78041); +#538013 = PRESENTATION_STYLE_ASSIGNMENT((#538014,#538019)); +#538014 = SURFACE_STYLE_USAGE(.BOTH.,#538015); +#538015 = SURFACE_SIDE_STYLE('',(#538016)); +#538016 = SURFACE_STYLE_FILL_AREA(#538017); +#538017 = FILL_AREA_STYLE('',(#538018)); +#538018 = FILL_AREA_STYLE_COLOUR('',#536902); +#538019 = CURVE_STYLE('',#538020,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538020 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538021 = STYLED_ITEM('color',(#538022),#78058); +#538022 = PRESENTATION_STYLE_ASSIGNMENT((#538023,#538028)); +#538023 = SURFACE_STYLE_USAGE(.BOTH.,#538024); +#538024 = SURFACE_SIDE_STYLE('',(#538025)); +#538025 = SURFACE_STYLE_FILL_AREA(#538026); +#538026 = FILL_AREA_STYLE('',(#538027)); +#538027 = FILL_AREA_STYLE_COLOUR('',#536902); +#538028 = CURVE_STYLE('',#538029,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538029 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538030 = STYLED_ITEM('color',(#538031),#78075); +#538031 = PRESENTATION_STYLE_ASSIGNMENT((#538032,#538037)); +#538032 = SURFACE_STYLE_USAGE(.BOTH.,#538033); +#538033 = SURFACE_SIDE_STYLE('',(#538034)); +#538034 = SURFACE_STYLE_FILL_AREA(#538035); +#538035 = FILL_AREA_STYLE('',(#538036)); +#538036 = FILL_AREA_STYLE_COLOUR('',#536902); +#538037 = CURVE_STYLE('',#538038,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538038 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538039 = STYLED_ITEM('color',(#538040),#78092); +#538040 = PRESENTATION_STYLE_ASSIGNMENT((#538041,#538046)); +#538041 = SURFACE_STYLE_USAGE(.BOTH.,#538042); +#538042 = SURFACE_SIDE_STYLE('',(#538043)); +#538043 = SURFACE_STYLE_FILL_AREA(#538044); +#538044 = FILL_AREA_STYLE('',(#538045)); +#538045 = FILL_AREA_STYLE_COLOUR('',#536902); +#538046 = CURVE_STYLE('',#538047,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538047 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538048 = STYLED_ITEM('color',(#538049),#78111); +#538049 = PRESENTATION_STYLE_ASSIGNMENT((#538050,#538055)); +#538050 = SURFACE_STYLE_USAGE(.BOTH.,#538051); +#538051 = SURFACE_SIDE_STYLE('',(#538052)); +#538052 = SURFACE_STYLE_FILL_AREA(#538053); +#538053 = FILL_AREA_STYLE('',(#538054)); +#538054 = FILL_AREA_STYLE_COLOUR('',#536902); +#538055 = CURVE_STYLE('',#538056,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538056 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538057 = STYLED_ITEM('color',(#538058),#78129); +#538058 = PRESENTATION_STYLE_ASSIGNMENT((#538059,#538064)); +#538059 = SURFACE_STYLE_USAGE(.BOTH.,#538060); +#538060 = SURFACE_SIDE_STYLE('',(#538061)); +#538061 = SURFACE_STYLE_FILL_AREA(#538062); +#538062 = FILL_AREA_STYLE('',(#538063)); +#538063 = FILL_AREA_STYLE_COLOUR('',#536902); +#538064 = CURVE_STYLE('',#538065,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538065 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538066 = STYLED_ITEM('color',(#538067),#78147); +#538067 = PRESENTATION_STYLE_ASSIGNMENT((#538068,#538073)); +#538068 = SURFACE_STYLE_USAGE(.BOTH.,#538069); +#538069 = SURFACE_SIDE_STYLE('',(#538070)); +#538070 = SURFACE_STYLE_FILL_AREA(#538071); +#538071 = FILL_AREA_STYLE('',(#538072)); +#538072 = FILL_AREA_STYLE_COLOUR('',#536902); +#538073 = CURVE_STYLE('',#538074,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538074 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538075 = STYLED_ITEM('color',(#538076),#78164); +#538076 = PRESENTATION_STYLE_ASSIGNMENT((#538077,#538082)); +#538077 = SURFACE_STYLE_USAGE(.BOTH.,#538078); +#538078 = SURFACE_SIDE_STYLE('',(#538079)); +#538079 = SURFACE_STYLE_FILL_AREA(#538080); +#538080 = FILL_AREA_STYLE('',(#538081)); +#538081 = FILL_AREA_STYLE_COLOUR('',#536902); +#538082 = CURVE_STYLE('',#538083,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538083 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538084 = STYLED_ITEM('color',(#538085),#78181); +#538085 = PRESENTATION_STYLE_ASSIGNMENT((#538086,#538091)); +#538086 = SURFACE_STYLE_USAGE(.BOTH.,#538087); +#538087 = SURFACE_SIDE_STYLE('',(#538088)); +#538088 = SURFACE_STYLE_FILL_AREA(#538089); +#538089 = FILL_AREA_STYLE('',(#538090)); +#538090 = FILL_AREA_STYLE_COLOUR('',#536902); +#538091 = CURVE_STYLE('',#538092,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538092 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538093 = STYLED_ITEM('color',(#538094),#78198); +#538094 = PRESENTATION_STYLE_ASSIGNMENT((#538095,#538100)); +#538095 = SURFACE_STYLE_USAGE(.BOTH.,#538096); +#538096 = SURFACE_SIDE_STYLE('',(#538097)); +#538097 = SURFACE_STYLE_FILL_AREA(#538098); +#538098 = FILL_AREA_STYLE('',(#538099)); +#538099 = FILL_AREA_STYLE_COLOUR('',#536902); +#538100 = CURVE_STYLE('',#538101,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538101 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538102 = STYLED_ITEM('color',(#538103),#78215); +#538103 = PRESENTATION_STYLE_ASSIGNMENT((#538104,#538109)); +#538104 = SURFACE_STYLE_USAGE(.BOTH.,#538105); +#538105 = SURFACE_SIDE_STYLE('',(#538106)); +#538106 = SURFACE_STYLE_FILL_AREA(#538107); +#538107 = FILL_AREA_STYLE('',(#538108)); +#538108 = FILL_AREA_STYLE_COLOUR('',#536902); +#538109 = CURVE_STYLE('',#538110,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538110 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538111 = STYLED_ITEM('color',(#538112),#78227); +#538112 = PRESENTATION_STYLE_ASSIGNMENT((#538113,#538118)); +#538113 = SURFACE_STYLE_USAGE(.BOTH.,#538114); +#538114 = SURFACE_SIDE_STYLE('',(#538115)); +#538115 = SURFACE_STYLE_FILL_AREA(#538116); +#538116 = FILL_AREA_STYLE('',(#538117)); +#538117 = FILL_AREA_STYLE_COLOUR('',#536902); +#538118 = CURVE_STYLE('',#538119,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538119 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538120 = STYLED_ITEM('color',(#538121),#78259); +#538121 = PRESENTATION_STYLE_ASSIGNMENT((#538122,#538127)); +#538122 = SURFACE_STYLE_USAGE(.BOTH.,#538123); +#538123 = SURFACE_SIDE_STYLE('',(#538124)); +#538124 = SURFACE_STYLE_FILL_AREA(#538125); +#538125 = FILL_AREA_STYLE('',(#538126)); +#538126 = FILL_AREA_STYLE_COLOUR('',#536902); +#538127 = CURVE_STYLE('',#538128,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538128 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538129 = STYLED_ITEM('color',(#538130),#78283); +#538130 = PRESENTATION_STYLE_ASSIGNMENT((#538131,#538136)); +#538131 = SURFACE_STYLE_USAGE(.BOTH.,#538132); +#538132 = SURFACE_SIDE_STYLE('',(#538133)); +#538133 = SURFACE_STYLE_FILL_AREA(#538134); +#538134 = FILL_AREA_STYLE('',(#538135)); +#538135 = FILL_AREA_STYLE_COLOUR('',#536902); +#538136 = CURVE_STYLE('',#538137,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538137 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538138 = STYLED_ITEM('color',(#538139),#78308); +#538139 = PRESENTATION_STYLE_ASSIGNMENT((#538140,#538145)); +#538140 = SURFACE_STYLE_USAGE(.BOTH.,#538141); +#538141 = SURFACE_SIDE_STYLE('',(#538142)); +#538142 = SURFACE_STYLE_FILL_AREA(#538143); +#538143 = FILL_AREA_STYLE('',(#538144)); +#538144 = FILL_AREA_STYLE_COLOUR('',#536902); +#538145 = CURVE_STYLE('',#538146,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538146 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538147 = STYLED_ITEM('color',(#538148),#78332); +#538148 = PRESENTATION_STYLE_ASSIGNMENT((#538149,#538154)); +#538149 = SURFACE_STYLE_USAGE(.BOTH.,#538150); +#538150 = SURFACE_SIDE_STYLE('',(#538151)); +#538151 = SURFACE_STYLE_FILL_AREA(#538152); +#538152 = FILL_AREA_STYLE('',(#538153)); +#538153 = FILL_AREA_STYLE_COLOUR('',#536902); +#538154 = CURVE_STYLE('',#538155,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538155 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538156 = STYLED_ITEM('color',(#538157),#78357); +#538157 = PRESENTATION_STYLE_ASSIGNMENT((#538158,#538163)); +#538158 = SURFACE_STYLE_USAGE(.BOTH.,#538159); +#538159 = SURFACE_SIDE_STYLE('',(#538160)); +#538160 = SURFACE_STYLE_FILL_AREA(#538161); +#538161 = FILL_AREA_STYLE('',(#538162)); +#538162 = FILL_AREA_STYLE_COLOUR('',#536902); +#538163 = CURVE_STYLE('',#538164,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538164 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538165 = STYLED_ITEM('color',(#538166),#78381); +#538166 = PRESENTATION_STYLE_ASSIGNMENT((#538167,#538172)); +#538167 = SURFACE_STYLE_USAGE(.BOTH.,#538168); +#538168 = SURFACE_SIDE_STYLE('',(#538169)); +#538169 = SURFACE_STYLE_FILL_AREA(#538170); +#538170 = FILL_AREA_STYLE('',(#538171)); +#538171 = FILL_AREA_STYLE_COLOUR('',#536902); +#538172 = CURVE_STYLE('',#538173,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538173 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538174 = STYLED_ITEM('color',(#538175),#78406); +#538175 = PRESENTATION_STYLE_ASSIGNMENT((#538176,#538181)); +#538176 = SURFACE_STYLE_USAGE(.BOTH.,#538177); +#538177 = SURFACE_SIDE_STYLE('',(#538178)); +#538178 = SURFACE_STYLE_FILL_AREA(#538179); +#538179 = FILL_AREA_STYLE('',(#538180)); +#538180 = FILL_AREA_STYLE_COLOUR('',#536902); +#538181 = CURVE_STYLE('',#538182,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538182 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538183 = STYLED_ITEM('color',(#538184),#78430); +#538184 = PRESENTATION_STYLE_ASSIGNMENT((#538185,#538190)); +#538185 = SURFACE_STYLE_USAGE(.BOTH.,#538186); +#538186 = SURFACE_SIDE_STYLE('',(#538187)); +#538187 = SURFACE_STYLE_FILL_AREA(#538188); +#538188 = FILL_AREA_STYLE('',(#538189)); +#538189 = FILL_AREA_STYLE_COLOUR('',#536902); +#538190 = CURVE_STYLE('',#538191,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538191 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538192 = STYLED_ITEM('color',(#538193),#78455); +#538193 = PRESENTATION_STYLE_ASSIGNMENT((#538194,#538199)); +#538194 = SURFACE_STYLE_USAGE(.BOTH.,#538195); +#538195 = SURFACE_SIDE_STYLE('',(#538196)); +#538196 = SURFACE_STYLE_FILL_AREA(#538197); +#538197 = FILL_AREA_STYLE('',(#538198)); +#538198 = FILL_AREA_STYLE_COLOUR('',#536902); +#538199 = CURVE_STYLE('',#538200,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538200 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538201 = STYLED_ITEM('color',(#538202),#78479); +#538202 = PRESENTATION_STYLE_ASSIGNMENT((#538203,#538208)); +#538203 = SURFACE_STYLE_USAGE(.BOTH.,#538204); +#538204 = SURFACE_SIDE_STYLE('',(#538205)); +#538205 = SURFACE_STYLE_FILL_AREA(#538206); +#538206 = FILL_AREA_STYLE('',(#538207)); +#538207 = FILL_AREA_STYLE_COLOUR('',#536902); +#538208 = CURVE_STYLE('',#538209,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538209 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538210 = STYLED_ITEM('color',(#538211),#78504); +#538211 = PRESENTATION_STYLE_ASSIGNMENT((#538212,#538217)); +#538212 = SURFACE_STYLE_USAGE(.BOTH.,#538213); +#538213 = SURFACE_SIDE_STYLE('',(#538214)); +#538214 = SURFACE_STYLE_FILL_AREA(#538215); +#538215 = FILL_AREA_STYLE('',(#538216)); +#538216 = FILL_AREA_STYLE_COLOUR('',#536902); +#538217 = CURVE_STYLE('',#538218,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538218 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538219 = STYLED_ITEM('color',(#538220),#78521); +#538220 = PRESENTATION_STYLE_ASSIGNMENT((#538221,#538226)); +#538221 = SURFACE_STYLE_USAGE(.BOTH.,#538222); +#538222 = SURFACE_SIDE_STYLE('',(#538223)); +#538223 = SURFACE_STYLE_FILL_AREA(#538224); +#538224 = FILL_AREA_STYLE('',(#538225)); +#538225 = FILL_AREA_STYLE_COLOUR('',#512538); +#538226 = CURVE_STYLE('',#538227,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#538227 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538228 = STYLED_ITEM('color',(#538229),#78538); +#538229 = PRESENTATION_STYLE_ASSIGNMENT((#538230,#538235)); +#538230 = SURFACE_STYLE_USAGE(.BOTH.,#538231); +#538231 = SURFACE_SIDE_STYLE('',(#538232)); +#538232 = SURFACE_STYLE_FILL_AREA(#538233); +#538233 = FILL_AREA_STYLE('',(#538234)); +#538234 = FILL_AREA_STYLE_COLOUR('',#512538); +#538235 = CURVE_STYLE('',#538236,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#538236 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538237 = STYLED_ITEM('color',(#538238),#78550); +#538238 = PRESENTATION_STYLE_ASSIGNMENT((#538239,#538244)); +#538239 = SURFACE_STYLE_USAGE(.BOTH.,#538240); +#538240 = SURFACE_SIDE_STYLE('',(#538241)); +#538241 = SURFACE_STYLE_FILL_AREA(#538242); +#538242 = FILL_AREA_STYLE('',(#538243)); +#538243 = FILL_AREA_STYLE_COLOUR('',#512538); +#538244 = CURVE_STYLE('',#538245,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#538245 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538246 = STYLED_ITEM('color',(#538247),#78567); +#538247 = PRESENTATION_STYLE_ASSIGNMENT((#538248,#538253)); +#538248 = SURFACE_STYLE_USAGE(.BOTH.,#538249); +#538249 = SURFACE_SIDE_STYLE('',(#538250)); +#538250 = SURFACE_STYLE_FILL_AREA(#538251); +#538251 = FILL_AREA_STYLE('',(#538252)); +#538252 = FILL_AREA_STYLE_COLOUR('',#512538); +#538253 = CURVE_STYLE('',#538254,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#538254 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538255 = STYLED_ITEM('color',(#538256),#78579); +#538256 = PRESENTATION_STYLE_ASSIGNMENT((#538257,#538262)); +#538257 = SURFACE_STYLE_USAGE(.BOTH.,#538258); +#538258 = SURFACE_SIDE_STYLE('',(#538259)); +#538259 = SURFACE_STYLE_FILL_AREA(#538260); +#538260 = FILL_AREA_STYLE('',(#538261)); +#538261 = FILL_AREA_STYLE_COLOUR('',#536902); +#538262 = CURVE_STYLE('',#538263,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538263 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538264 = STYLED_ITEM('color',(#538265),#78597); +#538265 = PRESENTATION_STYLE_ASSIGNMENT((#538266,#538271)); +#538266 = SURFACE_STYLE_USAGE(.BOTH.,#538267); +#538267 = SURFACE_SIDE_STYLE('',(#538268)); +#538268 = SURFACE_STYLE_FILL_AREA(#538269); +#538269 = FILL_AREA_STYLE('',(#538270)); +#538270 = FILL_AREA_STYLE_COLOUR('',#536902); +#538271 = CURVE_STYLE('',#538272,POSITIVE_LENGTH_MEASURE(0.1),#536902); +#538272 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538273 = STYLED_ITEM('color',(#538274),#78615); +#538274 = PRESENTATION_STYLE_ASSIGNMENT((#538275,#538280)); +#538275 = SURFACE_STYLE_USAGE(.BOTH.,#538276); +#538276 = SURFACE_SIDE_STYLE('',(#538277)); +#538277 = SURFACE_STYLE_FILL_AREA(#538278); +#538278 = FILL_AREA_STYLE('',(#538279)); +#538279 = FILL_AREA_STYLE_COLOUR('',#512501); +#538280 = CURVE_STYLE('',#538281,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#538281 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538282 = STYLED_ITEM('color',(#538283),#78626); +#538283 = PRESENTATION_STYLE_ASSIGNMENT((#538284,#538289)); +#538284 = SURFACE_STYLE_USAGE(.BOTH.,#538285); +#538285 = SURFACE_SIDE_STYLE('',(#538286)); +#538286 = SURFACE_STYLE_FILL_AREA(#538287); +#538287 = FILL_AREA_STYLE('',(#538288)); +#538288 = FILL_AREA_STYLE_COLOUR('',#512501); +#538289 = CURVE_STYLE('',#538290,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#538290 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538291 = STYLED_ITEM('color',(#538292),#78637); +#538292 = PRESENTATION_STYLE_ASSIGNMENT((#538293,#538298)); +#538293 = SURFACE_STYLE_USAGE(.BOTH.,#538294); +#538294 = SURFACE_SIDE_STYLE('',(#538295)); +#538295 = SURFACE_STYLE_FILL_AREA(#538296); +#538296 = FILL_AREA_STYLE('',(#538297)); +#538297 = FILL_AREA_STYLE_COLOUR('',#512501); +#538298 = CURVE_STYLE('',#538299,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#538299 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538300 = STYLED_ITEM('color',(#538301),#78761); +#538301 = PRESENTATION_STYLE_ASSIGNMENT((#538302,#538307)); +#538302 = SURFACE_STYLE_USAGE(.BOTH.,#538303); +#538303 = SURFACE_SIDE_STYLE('',(#538304)); +#538304 = SURFACE_STYLE_FILL_AREA(#538305); +#538305 = FILL_AREA_STYLE('',(#538306)); +#538306 = FILL_AREA_STYLE_COLOUR('',#513578); +#538307 = CURVE_STYLE('',#538308,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538308 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538309 = STYLED_ITEM('color',(#538310),#78792); +#538310 = PRESENTATION_STYLE_ASSIGNMENT((#538311,#538316)); +#538311 = SURFACE_STYLE_USAGE(.BOTH.,#538312); +#538312 = SURFACE_SIDE_STYLE('',(#538313)); +#538313 = SURFACE_STYLE_FILL_AREA(#538314); +#538314 = FILL_AREA_STYLE('',(#538315)); +#538315 = FILL_AREA_STYLE_COLOUR('',#513578); +#538316 = CURVE_STYLE('',#538317,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538317 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538318 = STYLED_ITEM('color',(#538319),#78817); +#538319 = PRESENTATION_STYLE_ASSIGNMENT((#538320,#538325)); +#538320 = SURFACE_STYLE_USAGE(.BOTH.,#538321); +#538321 = SURFACE_SIDE_STYLE('',(#538322)); +#538322 = SURFACE_STYLE_FILL_AREA(#538323); +#538323 = FILL_AREA_STYLE('',(#538324)); +#538324 = FILL_AREA_STYLE_COLOUR('',#513578); +#538325 = CURVE_STYLE('',#538326,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538326 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538327 = STYLED_ITEM('color',(#538328),#78841); +#538328 = PRESENTATION_STYLE_ASSIGNMENT((#538329,#538334)); +#538329 = SURFACE_STYLE_USAGE(.BOTH.,#538330); +#538330 = SURFACE_SIDE_STYLE('',(#538331)); +#538331 = SURFACE_STYLE_FILL_AREA(#538332); +#538332 = FILL_AREA_STYLE('',(#538333)); +#538333 = FILL_AREA_STYLE_COLOUR('',#513578); +#538334 = CURVE_STYLE('',#538335,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538335 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538336 = STYLED_ITEM('color',(#538337),#78866); +#538337 = PRESENTATION_STYLE_ASSIGNMENT((#538338,#538343)); +#538338 = SURFACE_STYLE_USAGE(.BOTH.,#538339); +#538339 = SURFACE_SIDE_STYLE('',(#538340)); +#538340 = SURFACE_STYLE_FILL_AREA(#538341); +#538341 = FILL_AREA_STYLE('',(#538342)); +#538342 = FILL_AREA_STYLE_COLOUR('',#513578); +#538343 = CURVE_STYLE('',#538344,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538344 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538345 = STYLED_ITEM('color',(#538346),#78890); +#538346 = PRESENTATION_STYLE_ASSIGNMENT((#538347,#538352)); +#538347 = SURFACE_STYLE_USAGE(.BOTH.,#538348); +#538348 = SURFACE_SIDE_STYLE('',(#538349)); +#538349 = SURFACE_STYLE_FILL_AREA(#538350); +#538350 = FILL_AREA_STYLE('',(#538351)); +#538351 = FILL_AREA_STYLE_COLOUR('',#513578); +#538352 = CURVE_STYLE('',#538353,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538353 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538354 = STYLED_ITEM('color',(#538355),#78915); +#538355 = PRESENTATION_STYLE_ASSIGNMENT((#538356,#538361)); +#538356 = SURFACE_STYLE_USAGE(.BOTH.,#538357); +#538357 = SURFACE_SIDE_STYLE('',(#538358)); +#538358 = SURFACE_STYLE_FILL_AREA(#538359); +#538359 = FILL_AREA_STYLE('',(#538360)); +#538360 = FILL_AREA_STYLE_COLOUR('',#513578); +#538361 = CURVE_STYLE('',#538362,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538362 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538363 = STYLED_ITEM('color',(#538364),#78939); +#538364 = PRESENTATION_STYLE_ASSIGNMENT((#538365,#538370)); +#538365 = SURFACE_STYLE_USAGE(.BOTH.,#538366); +#538366 = SURFACE_SIDE_STYLE('',(#538367)); +#538367 = SURFACE_STYLE_FILL_AREA(#538368); +#538368 = FILL_AREA_STYLE('',(#538369)); +#538369 = FILL_AREA_STYLE_COLOUR('',#513578); +#538370 = CURVE_STYLE('',#538371,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538371 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538372 = STYLED_ITEM('color',(#538373),#78964); +#538373 = PRESENTATION_STYLE_ASSIGNMENT((#538374,#538379)); +#538374 = SURFACE_STYLE_USAGE(.BOTH.,#538375); +#538375 = SURFACE_SIDE_STYLE('',(#538376)); +#538376 = SURFACE_STYLE_FILL_AREA(#538377); +#538377 = FILL_AREA_STYLE('',(#538378)); +#538378 = FILL_AREA_STYLE_COLOUR('',#513578); +#538379 = CURVE_STYLE('',#538380,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538380 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538381 = STYLED_ITEM('color',(#538382),#78988); +#538382 = PRESENTATION_STYLE_ASSIGNMENT((#538383,#538388)); +#538383 = SURFACE_STYLE_USAGE(.BOTH.,#538384); +#538384 = SURFACE_SIDE_STYLE('',(#538385)); +#538385 = SURFACE_STYLE_FILL_AREA(#538386); +#538386 = FILL_AREA_STYLE('',(#538387)); +#538387 = FILL_AREA_STYLE_COLOUR('',#513578); +#538388 = CURVE_STYLE('',#538389,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538389 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538390 = STYLED_ITEM('color',(#538391),#79013); +#538391 = PRESENTATION_STYLE_ASSIGNMENT((#538392,#538397)); +#538392 = SURFACE_STYLE_USAGE(.BOTH.,#538393); +#538393 = SURFACE_SIDE_STYLE('',(#538394)); +#538394 = SURFACE_STYLE_FILL_AREA(#538395); +#538395 = FILL_AREA_STYLE('',(#538396)); +#538396 = FILL_AREA_STYLE_COLOUR('',#513578); +#538397 = CURVE_STYLE('',#538398,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538398 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538399 = STYLED_ITEM('color',(#538400),#79037); +#538400 = PRESENTATION_STYLE_ASSIGNMENT((#538401,#538406)); +#538401 = SURFACE_STYLE_USAGE(.BOTH.,#538402); +#538402 = SURFACE_SIDE_STYLE('',(#538403)); +#538403 = SURFACE_STYLE_FILL_AREA(#538404); +#538404 = FILL_AREA_STYLE('',(#538405)); +#538405 = FILL_AREA_STYLE_COLOUR('',#513578); +#538406 = CURVE_STYLE('',#538407,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538407 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538408 = STYLED_ITEM('color',(#538409),#79055); +#538409 = PRESENTATION_STYLE_ASSIGNMENT((#538410,#538415)); +#538410 = SURFACE_STYLE_USAGE(.BOTH.,#538411); +#538411 = SURFACE_SIDE_STYLE('',(#538412)); +#538412 = SURFACE_STYLE_FILL_AREA(#538413); +#538413 = FILL_AREA_STYLE('',(#538414)); +#538414 = FILL_AREA_STYLE_COLOUR('',#513578); +#538415 = CURVE_STYLE('',#538416,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538416 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538417 = STYLED_ITEM('color',(#538418),#79092); +#538418 = PRESENTATION_STYLE_ASSIGNMENT((#538419,#538424)); +#538419 = SURFACE_STYLE_USAGE(.BOTH.,#538420); +#538420 = SURFACE_SIDE_STYLE('',(#538421)); +#538421 = SURFACE_STYLE_FILL_AREA(#538422); +#538422 = FILL_AREA_STYLE('',(#538423)); +#538423 = FILL_AREA_STYLE_COLOUR('',#513578); +#538424 = CURVE_STYLE('',#538425,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538425 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538426 = STYLED_ITEM('color',(#538427),#79122); +#538427 = PRESENTATION_STYLE_ASSIGNMENT((#538428,#538433)); +#538428 = SURFACE_STYLE_USAGE(.BOTH.,#538429); +#538429 = SURFACE_SIDE_STYLE('',(#538430)); +#538430 = SURFACE_STYLE_FILL_AREA(#538431); +#538431 = FILL_AREA_STYLE('',(#538432)); +#538432 = FILL_AREA_STYLE_COLOUR('',#513578); +#538433 = CURVE_STYLE('',#538434,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538434 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538435 = STYLED_ITEM('color',(#538436),#79147); +#538436 = PRESENTATION_STYLE_ASSIGNMENT((#538437,#538442)); +#538437 = SURFACE_STYLE_USAGE(.BOTH.,#538438); +#538438 = SURFACE_SIDE_STYLE('',(#538439)); +#538439 = SURFACE_STYLE_FILL_AREA(#538440); +#538440 = FILL_AREA_STYLE('',(#538441)); +#538441 = FILL_AREA_STYLE_COLOUR('',#513578); +#538442 = CURVE_STYLE('',#538443,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538443 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538444 = STYLED_ITEM('color',(#538445),#79164); +#538445 = PRESENTATION_STYLE_ASSIGNMENT((#538446,#538451)); +#538446 = SURFACE_STYLE_USAGE(.BOTH.,#538447); +#538447 = SURFACE_SIDE_STYLE('',(#538448)); +#538448 = SURFACE_STYLE_FILL_AREA(#538449); +#538449 = FILL_AREA_STYLE('',(#538450)); +#538450 = FILL_AREA_STYLE_COLOUR('',#513578); +#538451 = CURVE_STYLE('',#538452,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538452 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538453 = STYLED_ITEM('color',(#538454),#79189); +#538454 = PRESENTATION_STYLE_ASSIGNMENT((#538455,#538460)); +#538455 = SURFACE_STYLE_USAGE(.BOTH.,#538456); +#538456 = SURFACE_SIDE_STYLE('',(#538457)); +#538457 = SURFACE_STYLE_FILL_AREA(#538458); +#538458 = FILL_AREA_STYLE('',(#538459)); +#538459 = FILL_AREA_STYLE_COLOUR('',#513578); +#538460 = CURVE_STYLE('',#538461,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538461 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538462 = STYLED_ITEM('color',(#538463),#79206); +#538463 = PRESENTATION_STYLE_ASSIGNMENT((#538464,#538469)); +#538464 = SURFACE_STYLE_USAGE(.BOTH.,#538465); +#538465 = SURFACE_SIDE_STYLE('',(#538466)); +#538466 = SURFACE_STYLE_FILL_AREA(#538467); +#538467 = FILL_AREA_STYLE('',(#538468)); +#538468 = FILL_AREA_STYLE_COLOUR('',#513578); +#538469 = CURVE_STYLE('',#538470,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538470 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538471 = STYLED_ITEM('color',(#538472),#79235); +#538472 = PRESENTATION_STYLE_ASSIGNMENT((#538473,#538478)); +#538473 = SURFACE_STYLE_USAGE(.BOTH.,#538474); +#538474 = SURFACE_SIDE_STYLE('',(#538475)); +#538475 = SURFACE_STYLE_FILL_AREA(#538476); +#538476 = FILL_AREA_STYLE('',(#538477)); +#538477 = FILL_AREA_STYLE_COLOUR('',#513578); +#538478 = CURVE_STYLE('',#538479,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538479 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538480 = STYLED_ITEM('color',(#538481),#79265); +#538481 = PRESENTATION_STYLE_ASSIGNMENT((#538482,#538487)); +#538482 = SURFACE_STYLE_USAGE(.BOTH.,#538483); +#538483 = SURFACE_SIDE_STYLE('',(#538484)); +#538484 = SURFACE_STYLE_FILL_AREA(#538485); +#538485 = FILL_AREA_STYLE('',(#538486)); +#538486 = FILL_AREA_STYLE_COLOUR('',#513578); +#538487 = CURVE_STYLE('',#538488,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538488 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538489 = STYLED_ITEM('color',(#538490),#79290); +#538490 = PRESENTATION_STYLE_ASSIGNMENT((#538491,#538496)); +#538491 = SURFACE_STYLE_USAGE(.BOTH.,#538492); +#538492 = SURFACE_SIDE_STYLE('',(#538493)); +#538493 = SURFACE_STYLE_FILL_AREA(#538494); +#538494 = FILL_AREA_STYLE('',(#538495)); +#538495 = FILL_AREA_STYLE_COLOUR('',#513578); +#538496 = CURVE_STYLE('',#538497,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538497 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538498 = STYLED_ITEM('color',(#538499),#79307); +#538499 = PRESENTATION_STYLE_ASSIGNMENT((#538500,#538505)); +#538500 = SURFACE_STYLE_USAGE(.BOTH.,#538501); +#538501 = SURFACE_SIDE_STYLE('',(#538502)); +#538502 = SURFACE_STYLE_FILL_AREA(#538503); +#538503 = FILL_AREA_STYLE('',(#538504)); +#538504 = FILL_AREA_STYLE_COLOUR('',#513578); +#538505 = CURVE_STYLE('',#538506,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538506 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538507 = STYLED_ITEM('color',(#538508),#79330); +#538508 = PRESENTATION_STYLE_ASSIGNMENT((#538509,#538514)); +#538509 = SURFACE_STYLE_USAGE(.BOTH.,#538510); +#538510 = SURFACE_SIDE_STYLE('',(#538511)); +#538511 = SURFACE_STYLE_FILL_AREA(#538512); +#538512 = FILL_AREA_STYLE('',(#538513)); +#538513 = FILL_AREA_STYLE_COLOUR('',#513578); +#538514 = CURVE_STYLE('',#538515,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538515 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538516 = STYLED_ITEM('color',(#538517),#79341); +#538517 = PRESENTATION_STYLE_ASSIGNMENT((#538518,#538523)); +#538518 = SURFACE_STYLE_USAGE(.BOTH.,#538519); +#538519 = SURFACE_SIDE_STYLE('',(#538520)); +#538520 = SURFACE_STYLE_FILL_AREA(#538521); +#538521 = FILL_AREA_STYLE('',(#538522)); +#538522 = FILL_AREA_STYLE_COLOUR('',#513578); +#538523 = CURVE_STYLE('',#538524,POSITIVE_LENGTH_MEASURE(0.1),#513578); +#538524 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538525 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #538526),#12661); +#538526 = STYLED_ITEM('color',(#538527),#12445); +#538527 = PRESENTATION_STYLE_ASSIGNMENT((#538528,#538533)); +#538528 = SURFACE_STYLE_USAGE(.BOTH.,#538529); +#538529 = SURFACE_SIDE_STYLE('',(#538530)); +#538530 = SURFACE_STYLE_FILL_AREA(#538531); +#538531 = FILL_AREA_STYLE('',(#538532)); +#538532 = FILL_AREA_STYLE_COLOUR('',#515111); +#538533 = CURVE_STYLE('',#538534,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#538534 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#538535 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #538536,#538543,#538550,#538557,#538564,#538571,#538578,#538585, + #538592,#538599,#538606,#538613,#538620,#538627,#538634,#538641, + #538648,#538655,#538662,#538669,#538676,#538683,#538690,#538697, + #538704,#538711,#538718,#538725,#538732,#538739,#538746,#538753, + #538760,#538767,#538774,#538781,#538788,#538795,#538802,#538809, + #538816,#538823,#538830,#538837,#538844,#538851,#538858,#538865, + #538872,#538879,#538886,#538893,#538900,#538907,#538914,#538921, + #538928,#538935,#538942,#538949,#538956,#538963,#538970,#538977, + #538984,#538991,#538998,#539005,#539012,#539019,#539026,#539033, + #539040,#539047,#539054,#539061,#539068,#539075,#539082,#539089, + #539096,#539103,#539110,#539117,#539124,#539131,#539138,#539145, + #539152,#539159,#539166,#539173,#539180,#539187,#539194,#539201, + #539208,#539215,#539222,#539229,#539236,#539243,#539250,#539257, + #539264,#539271,#539278,#539285,#539292,#539299,#539306,#539313, + #539320,#539327,#539334,#539341,#539348,#539355,#539362,#539369, + #539376,#539383,#539390,#539397,#539404,#539411,#539418,#539425, + #539432,#539439,#539446,#539453,#539460,#539467,#539474,#539481, + #539488,#539495,#539502,#539509,#539516,#539523,#539530,#539537, + #539544,#539551,#539558,#539565,#539572,#539579,#539586,#539593, + #539600,#539607,#539614,#539621,#539628,#539635,#539642,#539649, + #539656,#539663,#539670,#539677,#539684,#539691,#539698,#539705, + #539712,#539719,#539726,#539733,#539740,#539747,#539754,#539761), + #450656); +#538536 = STYLED_ITEM('color',(#538537),#429968); +#538537 = PRESENTATION_STYLE_ASSIGNMENT((#538538)); +#538538 = SURFACE_STYLE_USAGE(.BOTH.,#538539); +#538539 = SURFACE_SIDE_STYLE('',(#538540)); +#538540 = SURFACE_STYLE_FILL_AREA(#538541); +#538541 = FILL_AREA_STYLE('',(#538542)); +#538542 = FILL_AREA_STYLE_COLOUR('',#515123); +#538543 = STYLED_ITEM('color',(#538544),#430019); +#538544 = PRESENTATION_STYLE_ASSIGNMENT((#538545)); +#538545 = SURFACE_STYLE_USAGE(.BOTH.,#538546); +#538546 = SURFACE_SIDE_STYLE('',(#538547)); +#538547 = SURFACE_STYLE_FILL_AREA(#538548); +#538548 = FILL_AREA_STYLE('',(#538549)); +#538549 = FILL_AREA_STYLE_COLOUR('',#515123); +#538550 = STYLED_ITEM('color',(#538551),#430070); +#538551 = PRESENTATION_STYLE_ASSIGNMENT((#538552)); +#538552 = SURFACE_STYLE_USAGE(.BOTH.,#538553); +#538553 = SURFACE_SIDE_STYLE('',(#538554)); +#538554 = SURFACE_STYLE_FILL_AREA(#538555); +#538555 = FILL_AREA_STYLE('',(#538556)); +#538556 = FILL_AREA_STYLE_COLOUR('',#515123); +#538557 = STYLED_ITEM('color',(#538558),#430114); +#538558 = PRESENTATION_STYLE_ASSIGNMENT((#538559)); +#538559 = SURFACE_STYLE_USAGE(.BOTH.,#538560); +#538560 = SURFACE_SIDE_STYLE('',(#538561)); +#538561 = SURFACE_STYLE_FILL_AREA(#538562); +#538562 = FILL_AREA_STYLE('',(#538563)); +#538563 = FILL_AREA_STYLE_COLOUR('',#515123); +#538564 = STYLED_ITEM('color',(#538565),#430175); +#538565 = PRESENTATION_STYLE_ASSIGNMENT((#538566)); +#538566 = SURFACE_STYLE_USAGE(.BOTH.,#538567); +#538567 = SURFACE_SIDE_STYLE('',(#538568)); +#538568 = SURFACE_STYLE_FILL_AREA(#538569); +#538569 = FILL_AREA_STYLE('',(#538570)); +#538570 = FILL_AREA_STYLE_COLOUR('',#515123); +#538571 = STYLED_ITEM('color',(#538572),#430251); +#538572 = PRESENTATION_STYLE_ASSIGNMENT((#538573)); +#538573 = SURFACE_STYLE_USAGE(.BOTH.,#538574); +#538574 = SURFACE_SIDE_STYLE('',(#538575)); +#538575 = SURFACE_STYLE_FILL_AREA(#538576); +#538576 = FILL_AREA_STYLE('',(#538577)); +#538577 = FILL_AREA_STYLE_COLOUR('',#515123); +#538578 = STYLED_ITEM('color',(#538579),#430320); +#538579 = PRESENTATION_STYLE_ASSIGNMENT((#538580)); +#538580 = SURFACE_STYLE_USAGE(.BOTH.,#538581); +#538581 = SURFACE_SIDE_STYLE('',(#538582)); +#538582 = SURFACE_STYLE_FILL_AREA(#538583); +#538583 = FILL_AREA_STYLE('',(#538584)); +#538584 = FILL_AREA_STYLE_COLOUR('',#515123); +#538585 = STYLED_ITEM('color',(#538586),#430389); +#538586 = PRESENTATION_STYLE_ASSIGNMENT((#538587)); +#538587 = SURFACE_STYLE_USAGE(.BOTH.,#538588); +#538588 = SURFACE_SIDE_STYLE('',(#538589)); +#538589 = SURFACE_STYLE_FILL_AREA(#538590); +#538590 = FILL_AREA_STYLE('',(#538591)); +#538591 = FILL_AREA_STYLE_COLOUR('',#515123); +#538592 = STYLED_ITEM('color',(#538593),#430441); +#538593 = PRESENTATION_STYLE_ASSIGNMENT((#538594)); +#538594 = SURFACE_STYLE_USAGE(.BOTH.,#538595); +#538595 = SURFACE_SIDE_STYLE('',(#538596)); +#538596 = SURFACE_STYLE_FILL_AREA(#538597); +#538597 = FILL_AREA_STYLE('',(#538598)); +#538598 = FILL_AREA_STYLE_COLOUR('',#515123); +#538599 = STYLED_ITEM('color',(#538600),#430493); +#538600 = PRESENTATION_STYLE_ASSIGNMENT((#538601)); +#538601 = SURFACE_STYLE_USAGE(.BOTH.,#538602); +#538602 = SURFACE_SIDE_STYLE('',(#538603)); +#538603 = SURFACE_STYLE_FILL_AREA(#538604); +#538604 = FILL_AREA_STYLE('',(#538605)); +#538605 = FILL_AREA_STYLE_COLOUR('',#515123); +#538606 = STYLED_ITEM('color',(#538607),#430537); +#538607 = PRESENTATION_STYLE_ASSIGNMENT((#538608)); +#538608 = SURFACE_STYLE_USAGE(.BOTH.,#538609); +#538609 = SURFACE_SIDE_STYLE('',(#538610)); +#538610 = SURFACE_STYLE_FILL_AREA(#538611); +#538611 = FILL_AREA_STYLE('',(#538612)); +#538612 = FILL_AREA_STYLE_COLOUR('',#515123); +#538613 = STYLED_ITEM('color',(#538614),#430581); +#538614 = PRESENTATION_STYLE_ASSIGNMENT((#538615)); +#538615 = SURFACE_STYLE_USAGE(.BOTH.,#538616); +#538616 = SURFACE_SIDE_STYLE('',(#538617)); +#538617 = SURFACE_STYLE_FILL_AREA(#538618); +#538618 = FILL_AREA_STYLE('',(#538619)); +#538619 = FILL_AREA_STYLE_COLOUR('',#515123); +#538620 = STYLED_ITEM('color',(#538621),#430723); +#538621 = PRESENTATION_STYLE_ASSIGNMENT((#538622)); +#538622 = SURFACE_STYLE_USAGE(.BOTH.,#538623); +#538623 = SURFACE_SIDE_STYLE('',(#538624)); +#538624 = SURFACE_STYLE_FILL_AREA(#538625); +#538625 = FILL_AREA_STYLE('',(#538626)); +#538626 = FILL_AREA_STYLE_COLOUR('',#515123); +#538627 = STYLED_ITEM('color',(#538628),#430894); +#538628 = PRESENTATION_STYLE_ASSIGNMENT((#538629)); +#538629 = SURFACE_STYLE_USAGE(.BOTH.,#538630); +#538630 = SURFACE_SIDE_STYLE('',(#538631)); +#538631 = SURFACE_STYLE_FILL_AREA(#538632); +#538632 = FILL_AREA_STYLE('',(#538633)); +#538633 = FILL_AREA_STYLE_COLOUR('',#515123); +#538634 = STYLED_ITEM('color',(#538635),#431101); +#538635 = PRESENTATION_STYLE_ASSIGNMENT((#538636)); +#538636 = SURFACE_STYLE_USAGE(.BOTH.,#538637); +#538637 = SURFACE_SIDE_STYLE('',(#538638)); +#538638 = SURFACE_STYLE_FILL_AREA(#538639); +#538639 = FILL_AREA_STYLE('',(#538640)); +#538640 = FILL_AREA_STYLE_COLOUR('',#515123); +#538641 = STYLED_ITEM('color',(#538642),#431357); +#538642 = PRESENTATION_STYLE_ASSIGNMENT((#538643)); +#538643 = SURFACE_STYLE_USAGE(.BOTH.,#538644); +#538644 = SURFACE_SIDE_STYLE('',(#538645)); +#538645 = SURFACE_STYLE_FILL_AREA(#538646); +#538646 = FILL_AREA_STYLE('',(#538647)); +#538647 = FILL_AREA_STYLE_COLOUR('',#515123); +#538648 = STYLED_ITEM('color',(#538649),#431602); +#538649 = PRESENTATION_STYLE_ASSIGNMENT((#538650)); +#538650 = SURFACE_STYLE_USAGE(.BOTH.,#538651); +#538651 = SURFACE_SIDE_STYLE('',(#538652)); +#538652 = SURFACE_STYLE_FILL_AREA(#538653); +#538653 = FILL_AREA_STYLE('',(#538654)); +#538654 = FILL_AREA_STYLE_COLOUR('',#515123); +#538655 = STYLED_ITEM('color',(#538656),#431654); +#538656 = PRESENTATION_STYLE_ASSIGNMENT((#538657)); +#538657 = SURFACE_STYLE_USAGE(.BOTH.,#538658); +#538658 = SURFACE_SIDE_STYLE('',(#538659)); +#538659 = SURFACE_STYLE_FILL_AREA(#538660); +#538660 = FILL_AREA_STYLE('',(#538661)); +#538661 = FILL_AREA_STYLE_COLOUR('',#515123); +#538662 = STYLED_ITEM('color',(#538663),#431706); +#538663 = PRESENTATION_STYLE_ASSIGNMENT((#538664)); +#538664 = SURFACE_STYLE_USAGE(.BOTH.,#538665); +#538665 = SURFACE_SIDE_STYLE('',(#538666)); +#538666 = SURFACE_STYLE_FILL_AREA(#538667); +#538667 = FILL_AREA_STYLE('',(#538668)); +#538668 = FILL_AREA_STYLE_COLOUR('',#515123); +#538669 = STYLED_ITEM('color',(#538670),#431758); +#538670 = PRESENTATION_STYLE_ASSIGNMENT((#538671)); +#538671 = SURFACE_STYLE_USAGE(.BOTH.,#538672); +#538672 = SURFACE_SIDE_STYLE('',(#538673)); +#538673 = SURFACE_STYLE_FILL_AREA(#538674); +#538674 = FILL_AREA_STYLE('',(#538675)); +#538675 = FILL_AREA_STYLE_COLOUR('',#515123); +#538676 = STYLED_ITEM('color',(#538677),#431810); +#538677 = PRESENTATION_STYLE_ASSIGNMENT((#538678)); +#538678 = SURFACE_STYLE_USAGE(.BOTH.,#538679); +#538679 = SURFACE_SIDE_STYLE('',(#538680)); +#538680 = SURFACE_STYLE_FILL_AREA(#538681); +#538681 = FILL_AREA_STYLE('',(#538682)); +#538682 = FILL_AREA_STYLE_COLOUR('',#515123); +#538683 = STYLED_ITEM('color',(#538684),#431862); +#538684 = PRESENTATION_STYLE_ASSIGNMENT((#538685)); +#538685 = SURFACE_STYLE_USAGE(.BOTH.,#538686); +#538686 = SURFACE_SIDE_STYLE('',(#538687)); +#538687 = SURFACE_STYLE_FILL_AREA(#538688); +#538688 = FILL_AREA_STYLE('',(#538689)); +#538689 = FILL_AREA_STYLE_COLOUR('',#515123); +#538690 = STYLED_ITEM('color',(#538691),#431914); +#538691 = PRESENTATION_STYLE_ASSIGNMENT((#538692)); +#538692 = SURFACE_STYLE_USAGE(.BOTH.,#538693); +#538693 = SURFACE_SIDE_STYLE('',(#538694)); +#538694 = SURFACE_STYLE_FILL_AREA(#538695); +#538695 = FILL_AREA_STYLE('',(#538696)); +#538696 = FILL_AREA_STYLE_COLOUR('',#515123); +#538697 = STYLED_ITEM('color',(#538698),#431966); +#538698 = PRESENTATION_STYLE_ASSIGNMENT((#538699)); +#538699 = SURFACE_STYLE_USAGE(.BOTH.,#538700); +#538700 = SURFACE_SIDE_STYLE('',(#538701)); +#538701 = SURFACE_STYLE_FILL_AREA(#538702); +#538702 = FILL_AREA_STYLE('',(#538703)); +#538703 = FILL_AREA_STYLE_COLOUR('',#515123); +#538704 = STYLED_ITEM('color',(#538705),#432018); +#538705 = PRESENTATION_STYLE_ASSIGNMENT((#538706)); +#538706 = SURFACE_STYLE_USAGE(.BOTH.,#538707); +#538707 = SURFACE_SIDE_STYLE('',(#538708)); +#538708 = SURFACE_STYLE_FILL_AREA(#538709); +#538709 = FILL_AREA_STYLE('',(#538710)); +#538710 = FILL_AREA_STYLE_COLOUR('',#515123); +#538711 = STYLED_ITEM('color',(#538712),#432062); +#538712 = PRESENTATION_STYLE_ASSIGNMENT((#538713)); +#538713 = SURFACE_STYLE_USAGE(.BOTH.,#538714); +#538714 = SURFACE_SIDE_STYLE('',(#538715)); +#538715 = SURFACE_STYLE_FILL_AREA(#538716); +#538716 = FILL_AREA_STYLE('',(#538717)); +#538717 = FILL_AREA_STYLE_COLOUR('',#515123); +#538718 = STYLED_ITEM('color',(#538719),#432114); +#538719 = PRESENTATION_STYLE_ASSIGNMENT((#538720)); +#538720 = SURFACE_STYLE_USAGE(.BOTH.,#538721); +#538721 = SURFACE_SIDE_STYLE('',(#538722)); +#538722 = SURFACE_STYLE_FILL_AREA(#538723); +#538723 = FILL_AREA_STYLE('',(#538724)); +#538724 = FILL_AREA_STYLE_COLOUR('',#515123); +#538725 = STYLED_ITEM('color',(#538726),#432166); +#538726 = PRESENTATION_STYLE_ASSIGNMENT((#538727)); +#538727 = SURFACE_STYLE_USAGE(.BOTH.,#538728); +#538728 = SURFACE_SIDE_STYLE('',(#538729)); +#538729 = SURFACE_STYLE_FILL_AREA(#538730); +#538730 = FILL_AREA_STYLE('',(#538731)); +#538731 = FILL_AREA_STYLE_COLOUR('',#515123); +#538732 = STYLED_ITEM('color',(#538733),#432218); +#538733 = PRESENTATION_STYLE_ASSIGNMENT((#538734)); +#538734 = SURFACE_STYLE_USAGE(.BOTH.,#538735); +#538735 = SURFACE_SIDE_STYLE('',(#538736)); +#538736 = SURFACE_STYLE_FILL_AREA(#538737); +#538737 = FILL_AREA_STYLE('',(#538738)); +#538738 = FILL_AREA_STYLE_COLOUR('',#515123); +#538739 = STYLED_ITEM('color',(#538740),#432270); +#538740 = PRESENTATION_STYLE_ASSIGNMENT((#538741)); +#538741 = SURFACE_STYLE_USAGE(.BOTH.,#538742); +#538742 = SURFACE_SIDE_STYLE('',(#538743)); +#538743 = SURFACE_STYLE_FILL_AREA(#538744); +#538744 = FILL_AREA_STYLE('',(#538745)); +#538745 = FILL_AREA_STYLE_COLOUR('',#515123); +#538746 = STYLED_ITEM('color',(#538747),#432314); +#538747 = PRESENTATION_STYLE_ASSIGNMENT((#538748)); +#538748 = SURFACE_STYLE_USAGE(.BOTH.,#538749); +#538749 = SURFACE_SIDE_STYLE('',(#538750)); +#538750 = SURFACE_STYLE_FILL_AREA(#538751); +#538751 = FILL_AREA_STYLE('',(#538752)); +#538752 = FILL_AREA_STYLE_COLOUR('',#515123); +#538753 = STYLED_ITEM('color',(#538754),#432366); +#538754 = PRESENTATION_STYLE_ASSIGNMENT((#538755)); +#538755 = SURFACE_STYLE_USAGE(.BOTH.,#538756); +#538756 = SURFACE_SIDE_STYLE('',(#538757)); +#538757 = SURFACE_STYLE_FILL_AREA(#538758); +#538758 = FILL_AREA_STYLE('',(#538759)); +#538759 = FILL_AREA_STYLE_COLOUR('',#515123); +#538760 = STYLED_ITEM('color',(#538761),#432418); +#538761 = PRESENTATION_STYLE_ASSIGNMENT((#538762)); +#538762 = SURFACE_STYLE_USAGE(.BOTH.,#538763); +#538763 = SURFACE_SIDE_STYLE('',(#538764)); +#538764 = SURFACE_STYLE_FILL_AREA(#538765); +#538765 = FILL_AREA_STYLE('',(#538766)); +#538766 = FILL_AREA_STYLE_COLOUR('',#515123); +#538767 = STYLED_ITEM('color',(#538768),#432470); +#538768 = PRESENTATION_STYLE_ASSIGNMENT((#538769)); +#538769 = SURFACE_STYLE_USAGE(.BOTH.,#538770); +#538770 = SURFACE_SIDE_STYLE('',(#538771)); +#538771 = SURFACE_STYLE_FILL_AREA(#538772); +#538772 = FILL_AREA_STYLE('',(#538773)); +#538773 = FILL_AREA_STYLE_COLOUR('',#515123); +#538774 = STYLED_ITEM('color',(#538775),#432522); +#538775 = PRESENTATION_STYLE_ASSIGNMENT((#538776)); +#538776 = SURFACE_STYLE_USAGE(.BOTH.,#538777); +#538777 = SURFACE_SIDE_STYLE('',(#538778)); +#538778 = SURFACE_STYLE_FILL_AREA(#538779); +#538779 = FILL_AREA_STYLE('',(#538780)); +#538780 = FILL_AREA_STYLE_COLOUR('',#515123); +#538781 = STYLED_ITEM('color',(#538782),#432566); +#538782 = PRESENTATION_STYLE_ASSIGNMENT((#538783)); +#538783 = SURFACE_STYLE_USAGE(.BOTH.,#538784); +#538784 = SURFACE_SIDE_STYLE('',(#538785)); +#538785 = SURFACE_STYLE_FILL_AREA(#538786); +#538786 = FILL_AREA_STYLE('',(#538787)); +#538787 = FILL_AREA_STYLE_COLOUR('',#515123); +#538788 = STYLED_ITEM('color',(#538789),#432610); +#538789 = PRESENTATION_STYLE_ASSIGNMENT((#538790)); +#538790 = SURFACE_STYLE_USAGE(.BOTH.,#538791); +#538791 = SURFACE_SIDE_STYLE('',(#538792)); +#538792 = SURFACE_STYLE_FILL_AREA(#538793); +#538793 = FILL_AREA_STYLE('',(#538794)); +#538794 = FILL_AREA_STYLE_COLOUR('',#515123); +#538795 = STYLED_ITEM('color',(#538796),#432654); +#538796 = PRESENTATION_STYLE_ASSIGNMENT((#538797)); +#538797 = SURFACE_STYLE_USAGE(.BOTH.,#538798); +#538798 = SURFACE_SIDE_STYLE('',(#538799)); +#538799 = SURFACE_STYLE_FILL_AREA(#538800); +#538800 = FILL_AREA_STYLE('',(#538801)); +#538801 = FILL_AREA_STYLE_COLOUR('',#515123); +#538802 = STYLED_ITEM('color',(#538803),#432698); +#538803 = PRESENTATION_STYLE_ASSIGNMENT((#538804)); +#538804 = SURFACE_STYLE_USAGE(.BOTH.,#538805); +#538805 = SURFACE_SIDE_STYLE('',(#538806)); +#538806 = SURFACE_STYLE_FILL_AREA(#538807); +#538807 = FILL_AREA_STYLE('',(#538808)); +#538808 = FILL_AREA_STYLE_COLOUR('',#515123); +#538809 = STYLED_ITEM('color',(#538810),#432750); +#538810 = PRESENTATION_STYLE_ASSIGNMENT((#538811)); +#538811 = SURFACE_STYLE_USAGE(.BOTH.,#538812); +#538812 = SURFACE_SIDE_STYLE('',(#538813)); +#538813 = SURFACE_STYLE_FILL_AREA(#538814); +#538814 = FILL_AREA_STYLE('',(#538815)); +#538815 = FILL_AREA_STYLE_COLOUR('',#515123); +#538816 = STYLED_ITEM('color',(#538817),#432802); +#538817 = PRESENTATION_STYLE_ASSIGNMENT((#538818)); +#538818 = SURFACE_STYLE_USAGE(.BOTH.,#538819); +#538819 = SURFACE_SIDE_STYLE('',(#538820)); +#538820 = SURFACE_STYLE_FILL_AREA(#538821); +#538821 = FILL_AREA_STYLE('',(#538822)); +#538822 = FILL_AREA_STYLE_COLOUR('',#515123); +#538823 = STYLED_ITEM('color',(#538824),#432846); +#538824 = PRESENTATION_STYLE_ASSIGNMENT((#538825)); +#538825 = SURFACE_STYLE_USAGE(.BOTH.,#538826); +#538826 = SURFACE_SIDE_STYLE('',(#538827)); +#538827 = SURFACE_STYLE_FILL_AREA(#538828); +#538828 = FILL_AREA_STYLE('',(#538829)); +#538829 = FILL_AREA_STYLE_COLOUR('',#515123); +#538830 = STYLED_ITEM('color',(#538831),#432890); +#538831 = PRESENTATION_STYLE_ASSIGNMENT((#538832)); +#538832 = SURFACE_STYLE_USAGE(.BOTH.,#538833); +#538833 = SURFACE_SIDE_STYLE('',(#538834)); +#538834 = SURFACE_STYLE_FILL_AREA(#538835); +#538835 = FILL_AREA_STYLE('',(#538836)); +#538836 = FILL_AREA_STYLE_COLOUR('',#515123); +#538837 = STYLED_ITEM('color',(#538838),#432942); +#538838 = PRESENTATION_STYLE_ASSIGNMENT((#538839)); +#538839 = SURFACE_STYLE_USAGE(.BOTH.,#538840); +#538840 = SURFACE_SIDE_STYLE('',(#538841)); +#538841 = SURFACE_STYLE_FILL_AREA(#538842); +#538842 = FILL_AREA_STYLE('',(#538843)); +#538843 = FILL_AREA_STYLE_COLOUR('',#515123); +#538844 = STYLED_ITEM('color',(#538845),#432994); +#538845 = PRESENTATION_STYLE_ASSIGNMENT((#538846)); +#538846 = SURFACE_STYLE_USAGE(.BOTH.,#538847); +#538847 = SURFACE_SIDE_STYLE('',(#538848)); +#538848 = SURFACE_STYLE_FILL_AREA(#538849); +#538849 = FILL_AREA_STYLE('',(#538850)); +#538850 = FILL_AREA_STYLE_COLOUR('',#515123); +#538851 = STYLED_ITEM('color',(#538852),#433046); +#538852 = PRESENTATION_STYLE_ASSIGNMENT((#538853)); +#538853 = SURFACE_STYLE_USAGE(.BOTH.,#538854); +#538854 = SURFACE_SIDE_STYLE('',(#538855)); +#538855 = SURFACE_STYLE_FILL_AREA(#538856); +#538856 = FILL_AREA_STYLE('',(#538857)); +#538857 = FILL_AREA_STYLE_COLOUR('',#515123); +#538858 = STYLED_ITEM('color',(#538859),#433098); +#538859 = PRESENTATION_STYLE_ASSIGNMENT((#538860)); +#538860 = SURFACE_STYLE_USAGE(.BOTH.,#538861); +#538861 = SURFACE_SIDE_STYLE('',(#538862)); +#538862 = SURFACE_STYLE_FILL_AREA(#538863); +#538863 = FILL_AREA_STYLE('',(#538864)); +#538864 = FILL_AREA_STYLE_COLOUR('',#515123); +#538865 = STYLED_ITEM('color',(#538866),#433272); +#538866 = PRESENTATION_STYLE_ASSIGNMENT((#538867)); +#538867 = SURFACE_STYLE_USAGE(.BOTH.,#538868); +#538868 = SURFACE_SIDE_STYLE('',(#538869)); +#538869 = SURFACE_STYLE_FILL_AREA(#538870); +#538870 = FILL_AREA_STYLE('',(#538871)); +#538871 = FILL_AREA_STYLE_COLOUR('',#515123); +#538872 = STYLED_ITEM('color',(#538873),#433366); +#538873 = PRESENTATION_STYLE_ASSIGNMENT((#538874)); +#538874 = SURFACE_STYLE_USAGE(.BOTH.,#538875); +#538875 = SURFACE_SIDE_STYLE('',(#538876)); +#538876 = SURFACE_STYLE_FILL_AREA(#538877); +#538877 = FILL_AREA_STYLE('',(#538878)); +#538878 = FILL_AREA_STYLE_COLOUR('',#515123); +#538879 = STYLED_ITEM('color',(#538880),#433460); +#538880 = PRESENTATION_STYLE_ASSIGNMENT((#538881)); +#538881 = SURFACE_STYLE_USAGE(.BOTH.,#538882); +#538882 = SURFACE_SIDE_STYLE('',(#538883)); +#538883 = SURFACE_STYLE_FILL_AREA(#538884); +#538884 = FILL_AREA_STYLE('',(#538885)); +#538885 = FILL_AREA_STYLE_COLOUR('',#515123); +#538886 = STYLED_ITEM('color',(#538887),#433479); +#538887 = PRESENTATION_STYLE_ASSIGNMENT((#538888)); +#538888 = SURFACE_STYLE_USAGE(.BOTH.,#538889); +#538889 = SURFACE_SIDE_STYLE('',(#538890)); +#538890 = SURFACE_STYLE_FILL_AREA(#538891); +#538891 = FILL_AREA_STYLE('',(#538892)); +#538892 = FILL_AREA_STYLE_COLOUR('',#515123); +#538893 = STYLED_ITEM('color',(#538894),#433659); +#538894 = PRESENTATION_STYLE_ASSIGNMENT((#538895)); +#538895 = SURFACE_STYLE_USAGE(.BOTH.,#538896); +#538896 = SURFACE_SIDE_STYLE('',(#538897)); +#538897 = SURFACE_STYLE_FILL_AREA(#538898); +#538898 = FILL_AREA_STYLE('',(#538899)); +#538899 = FILL_AREA_STYLE_COLOUR('',#515123); +#538900 = STYLED_ITEM('color',(#538901),#433839); +#538901 = PRESENTATION_STYLE_ASSIGNMENT((#538902)); +#538902 = SURFACE_STYLE_USAGE(.BOTH.,#538903); +#538903 = SURFACE_SIDE_STYLE('',(#538904)); +#538904 = SURFACE_STYLE_FILL_AREA(#538905); +#538905 = FILL_AREA_STYLE('',(#538906)); +#538906 = FILL_AREA_STYLE_COLOUR('',#515123); +#538907 = STYLED_ITEM('color',(#538908),#434052); +#538908 = PRESENTATION_STYLE_ASSIGNMENT((#538909)); +#538909 = SURFACE_STYLE_USAGE(.BOTH.,#538910); +#538910 = SURFACE_SIDE_STYLE('',(#538911)); +#538911 = SURFACE_STYLE_FILL_AREA(#538912); +#538912 = FILL_AREA_STYLE('',(#538913)); +#538913 = FILL_AREA_STYLE_COLOUR('',#515123); +#538914 = STYLED_ITEM('color',(#538915),#434224); +#538915 = PRESENTATION_STYLE_ASSIGNMENT((#538916)); +#538916 = SURFACE_STYLE_USAGE(.BOTH.,#538917); +#538917 = SURFACE_SIDE_STYLE('',(#538918)); +#538918 = SURFACE_STYLE_FILL_AREA(#538919); +#538919 = FILL_AREA_STYLE('',(#538920)); +#538920 = FILL_AREA_STYLE_COLOUR('',#515123); +#538921 = STYLED_ITEM('color',(#538922),#434396); +#538922 = PRESENTATION_STYLE_ASSIGNMENT((#538923)); +#538923 = SURFACE_STYLE_USAGE(.BOTH.,#538924); +#538924 = SURFACE_SIDE_STYLE('',(#538925)); +#538925 = SURFACE_STYLE_FILL_AREA(#538926); +#538926 = FILL_AREA_STYLE('',(#538927)); +#538927 = FILL_AREA_STYLE_COLOUR('',#515123); +#538928 = STYLED_ITEM('color',(#538929),#434568); +#538929 = PRESENTATION_STYLE_ASSIGNMENT((#538930)); +#538930 = SURFACE_STYLE_USAGE(.BOTH.,#538931); +#538931 = SURFACE_SIDE_STYLE('',(#538932)); +#538932 = SURFACE_STYLE_FILL_AREA(#538933); +#538933 = FILL_AREA_STYLE('',(#538934)); +#538934 = FILL_AREA_STYLE_COLOUR('',#515123); +#538935 = STYLED_ITEM('color',(#538936),#434750); +#538936 = PRESENTATION_STYLE_ASSIGNMENT((#538937)); +#538937 = SURFACE_STYLE_USAGE(.BOTH.,#538938); +#538938 = SURFACE_SIDE_STYLE('',(#538939)); +#538939 = SURFACE_STYLE_FILL_AREA(#538940); +#538940 = FILL_AREA_STYLE('',(#538941)); +#538941 = FILL_AREA_STYLE_COLOUR('',#515123); +#538942 = STYLED_ITEM('color',(#538943),#434932); +#538943 = PRESENTATION_STYLE_ASSIGNMENT((#538944)); +#538944 = SURFACE_STYLE_USAGE(.BOTH.,#538945); +#538945 = SURFACE_SIDE_STYLE('',(#538946)); +#538946 = SURFACE_STYLE_FILL_AREA(#538947); +#538947 = FILL_AREA_STYLE('',(#538948)); +#538948 = FILL_AREA_STYLE_COLOUR('',#515123); +#538949 = STYLED_ITEM('color',(#538950),#435114); +#538950 = PRESENTATION_STYLE_ASSIGNMENT((#538951)); +#538951 = SURFACE_STYLE_USAGE(.BOTH.,#538952); +#538952 = SURFACE_SIDE_STYLE('',(#538953)); +#538953 = SURFACE_STYLE_FILL_AREA(#538954); +#538954 = FILL_AREA_STYLE('',(#538955)); +#538955 = FILL_AREA_STYLE_COLOUR('',#515123); +#538956 = STYLED_ITEM('color',(#538957),#435296); +#538957 = PRESENTATION_STYLE_ASSIGNMENT((#538958)); +#538958 = SURFACE_STYLE_USAGE(.BOTH.,#538959); +#538959 = SURFACE_SIDE_STYLE('',(#538960)); +#538960 = SURFACE_STYLE_FILL_AREA(#538961); +#538961 = FILL_AREA_STYLE('',(#538962)); +#538962 = FILL_AREA_STYLE_COLOUR('',#515123); +#538963 = STYLED_ITEM('color',(#538964),#435541); +#538964 = PRESENTATION_STYLE_ASSIGNMENT((#538965)); +#538965 = SURFACE_STYLE_USAGE(.BOTH.,#538966); +#538966 = SURFACE_SIDE_STYLE('',(#538967)); +#538967 = SURFACE_STYLE_FILL_AREA(#538968); +#538968 = FILL_AREA_STYLE('',(#538969)); +#538969 = FILL_AREA_STYLE_COLOUR('',#515123); +#538970 = STYLED_ITEM('color',(#538971),#435691); +#538971 = PRESENTATION_STYLE_ASSIGNMENT((#538972)); +#538972 = SURFACE_STYLE_USAGE(.BOTH.,#538973); +#538973 = SURFACE_SIDE_STYLE('',(#538974)); +#538974 = SURFACE_STYLE_FILL_AREA(#538975); +#538975 = FILL_AREA_STYLE('',(#538976)); +#538976 = FILL_AREA_STYLE_COLOUR('',#515123); +#538977 = STYLED_ITEM('color',(#538978),#435853); +#538978 = PRESENTATION_STYLE_ASSIGNMENT((#538979)); +#538979 = SURFACE_STYLE_USAGE(.BOTH.,#538980); +#538980 = SURFACE_SIDE_STYLE('',(#538981)); +#538981 = SURFACE_STYLE_FILL_AREA(#538982); +#538982 = FILL_AREA_STYLE('',(#538983)); +#538983 = FILL_AREA_STYLE_COLOUR('',#515123); +#538984 = STYLED_ITEM('color',(#538985),#436019); +#538985 = PRESENTATION_STYLE_ASSIGNMENT((#538986)); +#538986 = SURFACE_STYLE_USAGE(.BOTH.,#538987); +#538987 = SURFACE_SIDE_STYLE('',(#538988)); +#538988 = SURFACE_STYLE_FILL_AREA(#538989); +#538989 = FILL_AREA_STYLE('',(#538990)); +#538990 = FILL_AREA_STYLE_COLOUR('',#515123); +#538991 = STYLED_ITEM('color',(#538992),#436162); +#538992 = PRESENTATION_STYLE_ASSIGNMENT((#538993)); +#538993 = SURFACE_STYLE_USAGE(.BOTH.,#538994); +#538994 = SURFACE_SIDE_STYLE('',(#538995)); +#538995 = SURFACE_STYLE_FILL_AREA(#538996); +#538996 = FILL_AREA_STYLE('',(#538997)); +#538997 = FILL_AREA_STYLE_COLOUR('',#515123); +#538998 = STYLED_ITEM('color',(#538999),#436407); +#538999 = PRESENTATION_STYLE_ASSIGNMENT((#539000)); +#539000 = SURFACE_STYLE_USAGE(.BOTH.,#539001); +#539001 = SURFACE_SIDE_STYLE('',(#539002)); +#539002 = SURFACE_STYLE_FILL_AREA(#539003); +#539003 = FILL_AREA_STYLE('',(#539004)); +#539004 = FILL_AREA_STYLE_COLOUR('',#515123); +#539005 = STYLED_ITEM('color',(#539006),#436557); +#539006 = PRESENTATION_STYLE_ASSIGNMENT((#539007)); +#539007 = SURFACE_STYLE_USAGE(.BOTH.,#539008); +#539008 = SURFACE_SIDE_STYLE('',(#539009)); +#539009 = SURFACE_STYLE_FILL_AREA(#539010); +#539010 = FILL_AREA_STYLE('',(#539011)); +#539011 = FILL_AREA_STYLE_COLOUR('',#515123); +#539012 = STYLED_ITEM('color',(#539013),#436719); +#539013 = PRESENTATION_STYLE_ASSIGNMENT((#539014)); +#539014 = SURFACE_STYLE_USAGE(.BOTH.,#539015); +#539015 = SURFACE_SIDE_STYLE('',(#539016)); +#539016 = SURFACE_STYLE_FILL_AREA(#539017); +#539017 = FILL_AREA_STYLE('',(#539018)); +#539018 = FILL_AREA_STYLE_COLOUR('',#515123); +#539019 = STYLED_ITEM('color',(#539020),#436885); +#539020 = PRESENTATION_STYLE_ASSIGNMENT((#539021)); +#539021 = SURFACE_STYLE_USAGE(.BOTH.,#539022); +#539022 = SURFACE_SIDE_STYLE('',(#539023)); +#539023 = SURFACE_STYLE_FILL_AREA(#539024); +#539024 = FILL_AREA_STYLE('',(#539025)); +#539025 = FILL_AREA_STYLE_COLOUR('',#515123); +#539026 = STYLED_ITEM('color',(#539027),#437088); +#539027 = PRESENTATION_STYLE_ASSIGNMENT((#539028)); +#539028 = SURFACE_STYLE_USAGE(.BOTH.,#539029); +#539029 = SURFACE_SIDE_STYLE('',(#539030)); +#539030 = SURFACE_STYLE_FILL_AREA(#539031); +#539031 = FILL_AREA_STYLE('',(#539032)); +#539032 = FILL_AREA_STYLE_COLOUR('',#515123); +#539033 = STYLED_ITEM('color',(#539034),#437270); +#539034 = PRESENTATION_STYLE_ASSIGNMENT((#539035)); +#539035 = SURFACE_STYLE_USAGE(.BOTH.,#539036); +#539036 = SURFACE_SIDE_STYLE('',(#539037)); +#539037 = SURFACE_STYLE_FILL_AREA(#539038); +#539038 = FILL_AREA_STYLE('',(#539039)); +#539039 = FILL_AREA_STYLE_COLOUR('',#515123); +#539040 = STYLED_ITEM('color',(#539041),#437452); +#539041 = PRESENTATION_STYLE_ASSIGNMENT((#539042)); +#539042 = SURFACE_STYLE_USAGE(.BOTH.,#539043); +#539043 = SURFACE_SIDE_STYLE('',(#539044)); +#539044 = SURFACE_STYLE_FILL_AREA(#539045); +#539045 = FILL_AREA_STYLE('',(#539046)); +#539046 = FILL_AREA_STYLE_COLOUR('',#515123); +#539047 = STYLED_ITEM('color',(#539048),#437697); +#539048 = PRESENTATION_STYLE_ASSIGNMENT((#539049)); +#539049 = SURFACE_STYLE_USAGE(.BOTH.,#539050); +#539050 = SURFACE_SIDE_STYLE('',(#539051)); +#539051 = SURFACE_STYLE_FILL_AREA(#539052); +#539052 = FILL_AREA_STYLE('',(#539053)); +#539053 = FILL_AREA_STYLE_COLOUR('',#515123); +#539054 = STYLED_ITEM('color',(#539055),#437847); +#539055 = PRESENTATION_STYLE_ASSIGNMENT((#539056)); +#539056 = SURFACE_STYLE_USAGE(.BOTH.,#539057); +#539057 = SURFACE_SIDE_STYLE('',(#539058)); +#539058 = SURFACE_STYLE_FILL_AREA(#539059); +#539059 = FILL_AREA_STYLE('',(#539060)); +#539060 = FILL_AREA_STYLE_COLOUR('',#515123); +#539061 = STYLED_ITEM('color',(#539062),#438009); +#539062 = PRESENTATION_STYLE_ASSIGNMENT((#539063)); +#539063 = SURFACE_STYLE_USAGE(.BOTH.,#539064); +#539064 = SURFACE_SIDE_STYLE('',(#539065)); +#539065 = SURFACE_STYLE_FILL_AREA(#539066); +#539066 = FILL_AREA_STYLE('',(#539067)); +#539067 = FILL_AREA_STYLE_COLOUR('',#515123); +#539068 = STYLED_ITEM('color',(#539069),#438175); +#539069 = PRESENTATION_STYLE_ASSIGNMENT((#539070)); +#539070 = SURFACE_STYLE_USAGE(.BOTH.,#539071); +#539071 = SURFACE_SIDE_STYLE('',(#539072)); +#539072 = SURFACE_STYLE_FILL_AREA(#539073); +#539073 = FILL_AREA_STYLE('',(#539074)); +#539074 = FILL_AREA_STYLE_COLOUR('',#515123); +#539075 = STYLED_ITEM('color',(#539076),#438396); +#539076 = PRESENTATION_STYLE_ASSIGNMENT((#539077)); +#539077 = SURFACE_STYLE_USAGE(.BOTH.,#539078); +#539078 = SURFACE_SIDE_STYLE('',(#539079)); +#539079 = SURFACE_STYLE_FILL_AREA(#539080); +#539080 = FILL_AREA_STYLE('',(#539081)); +#539081 = FILL_AREA_STYLE_COLOUR('',#515123); +#539082 = STYLED_ITEM('color',(#539083),#438576); +#539083 = PRESENTATION_STYLE_ASSIGNMENT((#539084)); +#539084 = SURFACE_STYLE_USAGE(.BOTH.,#539085); +#539085 = SURFACE_SIDE_STYLE('',(#539086)); +#539086 = SURFACE_STYLE_FILL_AREA(#539087); +#539087 = FILL_AREA_STYLE('',(#539088)); +#539088 = FILL_AREA_STYLE_COLOUR('',#515123); +#539089 = STYLED_ITEM('color',(#539090),#438756); +#539090 = PRESENTATION_STYLE_ASSIGNMENT((#539091)); +#539091 = SURFACE_STYLE_USAGE(.BOTH.,#539092); +#539092 = SURFACE_SIDE_STYLE('',(#539093)); +#539093 = SURFACE_STYLE_FILL_AREA(#539094); +#539094 = FILL_AREA_STYLE('',(#539095)); +#539095 = FILL_AREA_STYLE_COLOUR('',#515123); +#539096 = STYLED_ITEM('color',(#539097),#438936); +#539097 = PRESENTATION_STYLE_ASSIGNMENT((#539098)); +#539098 = SURFACE_STYLE_USAGE(.BOTH.,#539099); +#539099 = SURFACE_SIDE_STYLE('',(#539100)); +#539100 = SURFACE_STYLE_FILL_AREA(#539101); +#539101 = FILL_AREA_STYLE('',(#539102)); +#539102 = FILL_AREA_STYLE_COLOUR('',#515123); +#539103 = STYLED_ITEM('color',(#539104),#439108); +#539104 = PRESENTATION_STYLE_ASSIGNMENT((#539105)); +#539105 = SURFACE_STYLE_USAGE(.BOTH.,#539106); +#539106 = SURFACE_SIDE_STYLE('',(#539107)); +#539107 = SURFACE_STYLE_FILL_AREA(#539108); +#539108 = FILL_AREA_STYLE('',(#539109)); +#539109 = FILL_AREA_STYLE_COLOUR('',#515123); +#539110 = STYLED_ITEM('color',(#539111),#439280); +#539111 = PRESENTATION_STYLE_ASSIGNMENT((#539112)); +#539112 = SURFACE_STYLE_USAGE(.BOTH.,#539113); +#539113 = SURFACE_SIDE_STYLE('',(#539114)); +#539114 = SURFACE_STYLE_FILL_AREA(#539115); +#539115 = FILL_AREA_STYLE('',(#539116)); +#539116 = FILL_AREA_STYLE_COLOUR('',#515123); +#539117 = STYLED_ITEM('color',(#539118),#439452); +#539118 = PRESENTATION_STYLE_ASSIGNMENT((#539119)); +#539119 = SURFACE_STYLE_USAGE(.BOTH.,#539120); +#539120 = SURFACE_SIDE_STYLE('',(#539121)); +#539121 = SURFACE_STYLE_FILL_AREA(#539122); +#539122 = FILL_AREA_STYLE('',(#539123)); +#539123 = FILL_AREA_STYLE_COLOUR('',#515123); +#539124 = STYLED_ITEM('color',(#539125),#439634); +#539125 = PRESENTATION_STYLE_ASSIGNMENT((#539126)); +#539126 = SURFACE_STYLE_USAGE(.BOTH.,#539127); +#539127 = SURFACE_SIDE_STYLE('',(#539128)); +#539128 = SURFACE_STYLE_FILL_AREA(#539129); +#539129 = FILL_AREA_STYLE('',(#539130)); +#539130 = FILL_AREA_STYLE_COLOUR('',#515123); +#539131 = STYLED_ITEM('color',(#539132),#439816); +#539132 = PRESENTATION_STYLE_ASSIGNMENT((#539133)); +#539133 = SURFACE_STYLE_USAGE(.BOTH.,#539134); +#539134 = SURFACE_SIDE_STYLE('',(#539135)); +#539135 = SURFACE_STYLE_FILL_AREA(#539136); +#539136 = FILL_AREA_STYLE('',(#539137)); +#539137 = FILL_AREA_STYLE_COLOUR('',#515123); +#539138 = STYLED_ITEM('color',(#539139),#439958); +#539139 = PRESENTATION_STYLE_ASSIGNMENT((#539140)); +#539140 = SURFACE_STYLE_USAGE(.BOTH.,#539141); +#539141 = SURFACE_SIDE_STYLE('',(#539142)); +#539142 = SURFACE_STYLE_FILL_AREA(#539143); +#539143 = FILL_AREA_STYLE('',(#539144)); +#539144 = FILL_AREA_STYLE_COLOUR('',#515123); +#539145 = STYLED_ITEM('color',(#539146),#440132); +#539146 = PRESENTATION_STYLE_ASSIGNMENT((#539147)); +#539147 = SURFACE_STYLE_USAGE(.BOTH.,#539148); +#539148 = SURFACE_SIDE_STYLE('',(#539149)); +#539149 = SURFACE_STYLE_FILL_AREA(#539150); +#539150 = FILL_AREA_STYLE('',(#539151)); +#539151 = FILL_AREA_STYLE_COLOUR('',#515123); +#539152 = STYLED_ITEM('color',(#539153),#440314); +#539153 = PRESENTATION_STYLE_ASSIGNMENT((#539154)); +#539154 = SURFACE_STYLE_USAGE(.BOTH.,#539155); +#539155 = SURFACE_SIDE_STYLE('',(#539156)); +#539156 = SURFACE_STYLE_FILL_AREA(#539157); +#539157 = FILL_AREA_STYLE('',(#539158)); +#539158 = FILL_AREA_STYLE_COLOUR('',#515123); +#539159 = STYLED_ITEM('color',(#539160),#440481); +#539160 = PRESENTATION_STYLE_ASSIGNMENT((#539161)); +#539161 = SURFACE_STYLE_USAGE(.BOTH.,#539162); +#539162 = SURFACE_SIDE_STYLE('',(#539163)); +#539163 = SURFACE_STYLE_FILL_AREA(#539164); +#539164 = FILL_AREA_STYLE('',(#539165)); +#539165 = FILL_AREA_STYLE_COLOUR('',#515123); +#539166 = STYLED_ITEM('color',(#539167),#440663); +#539167 = PRESENTATION_STYLE_ASSIGNMENT((#539168)); +#539168 = SURFACE_STYLE_USAGE(.BOTH.,#539169); +#539169 = SURFACE_SIDE_STYLE('',(#539170)); +#539170 = SURFACE_STYLE_FILL_AREA(#539171); +#539171 = FILL_AREA_STYLE('',(#539172)); +#539172 = FILL_AREA_STYLE_COLOUR('',#515123); +#539173 = STYLED_ITEM('color',(#539174),#440845); +#539174 = PRESENTATION_STYLE_ASSIGNMENT((#539175)); +#539175 = SURFACE_STYLE_USAGE(.BOTH.,#539176); +#539176 = SURFACE_SIDE_STYLE('',(#539177)); +#539177 = SURFACE_STYLE_FILL_AREA(#539178); +#539178 = FILL_AREA_STYLE('',(#539179)); +#539179 = FILL_AREA_STYLE_COLOUR('',#515123); +#539180 = STYLED_ITEM('color',(#539181),#441090); +#539181 = PRESENTATION_STYLE_ASSIGNMENT((#539182)); +#539182 = SURFACE_STYLE_USAGE(.BOTH.,#539183); +#539183 = SURFACE_SIDE_STYLE('',(#539184)); +#539184 = SURFACE_STYLE_FILL_AREA(#539185); +#539185 = FILL_AREA_STYLE('',(#539186)); +#539186 = FILL_AREA_STYLE_COLOUR('',#515123); +#539187 = STYLED_ITEM('color',(#539188),#441240); +#539188 = PRESENTATION_STYLE_ASSIGNMENT((#539189)); +#539189 = SURFACE_STYLE_USAGE(.BOTH.,#539190); +#539190 = SURFACE_SIDE_STYLE('',(#539191)); +#539191 = SURFACE_STYLE_FILL_AREA(#539192); +#539192 = FILL_AREA_STYLE('',(#539193)); +#539193 = FILL_AREA_STYLE_COLOUR('',#515123); +#539194 = STYLED_ITEM('color',(#539195),#441402); +#539195 = PRESENTATION_STYLE_ASSIGNMENT((#539196)); +#539196 = SURFACE_STYLE_USAGE(.BOTH.,#539197); +#539197 = SURFACE_SIDE_STYLE('',(#539198)); +#539198 = SURFACE_STYLE_FILL_AREA(#539199); +#539199 = FILL_AREA_STYLE('',(#539200)); +#539200 = FILL_AREA_STYLE_COLOUR('',#515123); +#539201 = STYLED_ITEM('color',(#539202),#441568); +#539202 = PRESENTATION_STYLE_ASSIGNMENT((#539203)); +#539203 = SURFACE_STYLE_USAGE(.BOTH.,#539204); +#539204 = SURFACE_SIDE_STYLE('',(#539205)); +#539205 = SURFACE_STYLE_FILL_AREA(#539206); +#539206 = FILL_AREA_STYLE('',(#539207)); +#539207 = FILL_AREA_STYLE_COLOUR('',#515123); +#539208 = STYLED_ITEM('color',(#539209),#441813); +#539209 = PRESENTATION_STYLE_ASSIGNMENT((#539210)); +#539210 = SURFACE_STYLE_USAGE(.BOTH.,#539211); +#539211 = SURFACE_SIDE_STYLE('',(#539212)); +#539212 = SURFACE_STYLE_FILL_AREA(#539213); +#539213 = FILL_AREA_STYLE('',(#539214)); +#539214 = FILL_AREA_STYLE_COLOUR('',#515123); +#539215 = STYLED_ITEM('color',(#539216),#441963); +#539216 = PRESENTATION_STYLE_ASSIGNMENT((#539217)); +#539217 = SURFACE_STYLE_USAGE(.BOTH.,#539218); +#539218 = SURFACE_SIDE_STYLE('',(#539219)); +#539219 = SURFACE_STYLE_FILL_AREA(#539220); +#539220 = FILL_AREA_STYLE('',(#539221)); +#539221 = FILL_AREA_STYLE_COLOUR('',#515123); +#539222 = STYLED_ITEM('color',(#539223),#442125); +#539223 = PRESENTATION_STYLE_ASSIGNMENT((#539224)); +#539224 = SURFACE_STYLE_USAGE(.BOTH.,#539225); +#539225 = SURFACE_SIDE_STYLE('',(#539226)); +#539226 = SURFACE_STYLE_FILL_AREA(#539227); +#539227 = FILL_AREA_STYLE('',(#539228)); +#539228 = FILL_AREA_STYLE_COLOUR('',#515123); +#539229 = STYLED_ITEM('color',(#539230),#442291); +#539230 = PRESENTATION_STYLE_ASSIGNMENT((#539231)); +#539231 = SURFACE_STYLE_USAGE(.BOTH.,#539232); +#539232 = SURFACE_SIDE_STYLE('',(#539233)); +#539233 = SURFACE_STYLE_FILL_AREA(#539234); +#539234 = FILL_AREA_STYLE('',(#539235)); +#539235 = FILL_AREA_STYLE_COLOUR('',#515123); +#539236 = STYLED_ITEM('color',(#539237),#442536); +#539237 = PRESENTATION_STYLE_ASSIGNMENT((#539238)); +#539238 = SURFACE_STYLE_USAGE(.BOTH.,#539239); +#539239 = SURFACE_SIDE_STYLE('',(#539240)); +#539240 = SURFACE_STYLE_FILL_AREA(#539241); +#539241 = FILL_AREA_STYLE('',(#539242)); +#539242 = FILL_AREA_STYLE_COLOUR('',#515123); +#539243 = STYLED_ITEM('color',(#539244),#442686); +#539244 = PRESENTATION_STYLE_ASSIGNMENT((#539245)); +#539245 = SURFACE_STYLE_USAGE(.BOTH.,#539246); +#539246 = SURFACE_SIDE_STYLE('',(#539247)); +#539247 = SURFACE_STYLE_FILL_AREA(#539248); +#539248 = FILL_AREA_STYLE('',(#539249)); +#539249 = FILL_AREA_STYLE_COLOUR('',#515123); +#539250 = STYLED_ITEM('color',(#539251),#442848); +#539251 = PRESENTATION_STYLE_ASSIGNMENT((#539252)); +#539252 = SURFACE_STYLE_USAGE(.BOTH.,#539253); +#539253 = SURFACE_SIDE_STYLE('',(#539254)); +#539254 = SURFACE_STYLE_FILL_AREA(#539255); +#539255 = FILL_AREA_STYLE('',(#539256)); +#539256 = FILL_AREA_STYLE_COLOUR('',#515123); +#539257 = STYLED_ITEM('color',(#539258),#443014); +#539258 = PRESENTATION_STYLE_ASSIGNMENT((#539259)); +#539259 = SURFACE_STYLE_USAGE(.BOTH.,#539260); +#539260 = SURFACE_SIDE_STYLE('',(#539261)); +#539261 = SURFACE_STYLE_FILL_AREA(#539262); +#539262 = FILL_AREA_STYLE('',(#539263)); +#539263 = FILL_AREA_STYLE_COLOUR('',#515123); +#539264 = STYLED_ITEM('color',(#539265),#443208); +#539265 = PRESENTATION_STYLE_ASSIGNMENT((#539266)); +#539266 = SURFACE_STYLE_USAGE(.BOTH.,#539267); +#539267 = SURFACE_SIDE_STYLE('',(#539268)); +#539268 = SURFACE_STYLE_FILL_AREA(#539269); +#539269 = FILL_AREA_STYLE('',(#539270)); +#539270 = FILL_AREA_STYLE_COLOUR('',#515123); +#539271 = STYLED_ITEM('color',(#539272),#443416); +#539272 = PRESENTATION_STYLE_ASSIGNMENT((#539273)); +#539273 = SURFACE_STYLE_USAGE(.BOTH.,#539274); +#539274 = SURFACE_SIDE_STYLE('',(#539275)); +#539275 = SURFACE_STYLE_FILL_AREA(#539276); +#539276 = FILL_AREA_STYLE('',(#539277)); +#539277 = FILL_AREA_STYLE_COLOUR('',#515123); +#539278 = STYLED_ITEM('color',(#539279),#443493); +#539279 = PRESENTATION_STYLE_ASSIGNMENT((#539280)); +#539280 = SURFACE_STYLE_USAGE(.BOTH.,#539281); +#539281 = SURFACE_SIDE_STYLE('',(#539282)); +#539282 = SURFACE_STYLE_FILL_AREA(#539283); +#539283 = FILL_AREA_STYLE('',(#539284)); +#539284 = FILL_AREA_STYLE_COLOUR('',#515123); +#539285 = STYLED_ITEM('color',(#539286),#443570); +#539286 = PRESENTATION_STYLE_ASSIGNMENT((#539287)); +#539287 = SURFACE_STYLE_USAGE(.BOTH.,#539288); +#539288 = SURFACE_SIDE_STYLE('',(#539289)); +#539289 = SURFACE_STYLE_FILL_AREA(#539290); +#539290 = FILL_AREA_STYLE('',(#539291)); +#539291 = FILL_AREA_STYLE_COLOUR('',#515123); +#539292 = STYLED_ITEM('color',(#539293),#443622); +#539293 = PRESENTATION_STYLE_ASSIGNMENT((#539294)); +#539294 = SURFACE_STYLE_USAGE(.BOTH.,#539295); +#539295 = SURFACE_SIDE_STYLE('',(#539296)); +#539296 = SURFACE_STYLE_FILL_AREA(#539297); +#539297 = FILL_AREA_STYLE('',(#539298)); +#539298 = FILL_AREA_STYLE_COLOUR('',#515123); +#539299 = STYLED_ITEM('color',(#539300),#443674); +#539300 = PRESENTATION_STYLE_ASSIGNMENT((#539301)); +#539301 = SURFACE_STYLE_USAGE(.BOTH.,#539302); +#539302 = SURFACE_SIDE_STYLE('',(#539303)); +#539303 = SURFACE_STYLE_FILL_AREA(#539304); +#539304 = FILL_AREA_STYLE('',(#539305)); +#539305 = FILL_AREA_STYLE_COLOUR('',#515123); +#539306 = STYLED_ITEM('color',(#539307),#443782); +#539307 = PRESENTATION_STYLE_ASSIGNMENT((#539308)); +#539308 = SURFACE_STYLE_USAGE(.BOTH.,#539309); +#539309 = SURFACE_SIDE_STYLE('',(#539310)); +#539310 = SURFACE_STYLE_FILL_AREA(#539311); +#539311 = FILL_AREA_STYLE('',(#539312)); +#539312 = FILL_AREA_STYLE_COLOUR('',#515123); +#539313 = STYLED_ITEM('color',(#539314),#443840); +#539314 = PRESENTATION_STYLE_ASSIGNMENT((#539315)); +#539315 = SURFACE_STYLE_USAGE(.BOTH.,#539316); +#539316 = SURFACE_SIDE_STYLE('',(#539317)); +#539317 = SURFACE_STYLE_FILL_AREA(#539318); +#539318 = FILL_AREA_STYLE('',(#539319)); +#539319 = FILL_AREA_STYLE_COLOUR('',#515123); +#539320 = STYLED_ITEM('color',(#539321),#443909); +#539321 = PRESENTATION_STYLE_ASSIGNMENT((#539322)); +#539322 = SURFACE_STYLE_USAGE(.BOTH.,#539323); +#539323 = SURFACE_SIDE_STYLE('',(#539324)); +#539324 = SURFACE_STYLE_FILL_AREA(#539325); +#539325 = FILL_AREA_STYLE('',(#539326)); +#539326 = FILL_AREA_STYLE_COLOUR('',#515123); +#539327 = STYLED_ITEM('color',(#539328),#443978); +#539328 = PRESENTATION_STYLE_ASSIGNMENT((#539329)); +#539329 = SURFACE_STYLE_USAGE(.BOTH.,#539330); +#539330 = SURFACE_SIDE_STYLE('',(#539331)); +#539331 = SURFACE_STYLE_FILL_AREA(#539332); +#539332 = FILL_AREA_STYLE('',(#539333)); +#539333 = FILL_AREA_STYLE_COLOUR('',#515123); +#539334 = STYLED_ITEM('color',(#539335),#444008); +#539335 = PRESENTATION_STYLE_ASSIGNMENT((#539336)); +#539336 = SURFACE_STYLE_USAGE(.BOTH.,#539337); +#539337 = SURFACE_SIDE_STYLE('',(#539338)); +#539338 = SURFACE_STYLE_FILL_AREA(#539339); +#539339 = FILL_AREA_STYLE('',(#539340)); +#539340 = FILL_AREA_STYLE_COLOUR('',#515123); +#539341 = STYLED_ITEM('color',(#539342),#444060); +#539342 = PRESENTATION_STYLE_ASSIGNMENT((#539343)); +#539343 = SURFACE_STYLE_USAGE(.BOTH.,#539344); +#539344 = SURFACE_SIDE_STYLE('',(#539345)); +#539345 = SURFACE_STYLE_FILL_AREA(#539346); +#539346 = FILL_AREA_STYLE('',(#539347)); +#539347 = FILL_AREA_STYLE_COLOUR('',#515123); +#539348 = STYLED_ITEM('color',(#539349),#444112); +#539349 = PRESENTATION_STYLE_ASSIGNMENT((#539350)); +#539350 = SURFACE_STYLE_USAGE(.BOTH.,#539351); +#539351 = SURFACE_SIDE_STYLE('',(#539352)); +#539352 = SURFACE_STYLE_FILL_AREA(#539353); +#539353 = FILL_AREA_STYLE('',(#539354)); +#539354 = FILL_AREA_STYLE_COLOUR('',#515123); +#539355 = STYLED_ITEM('color',(#539356),#444189); +#539356 = PRESENTATION_STYLE_ASSIGNMENT((#539357)); +#539357 = SURFACE_STYLE_USAGE(.BOTH.,#539358); +#539358 = SURFACE_SIDE_STYLE('',(#539359)); +#539359 = SURFACE_STYLE_FILL_AREA(#539360); +#539360 = FILL_AREA_STYLE('',(#539361)); +#539361 = FILL_AREA_STYLE_COLOUR('',#515123); +#539362 = STYLED_ITEM('color',(#539363),#444266); +#539363 = PRESENTATION_STYLE_ASSIGNMENT((#539364)); +#539364 = SURFACE_STYLE_USAGE(.BOTH.,#539365); +#539365 = SURFACE_SIDE_STYLE('',(#539366)); +#539366 = SURFACE_STYLE_FILL_AREA(#539367); +#539367 = FILL_AREA_STYLE('',(#539368)); +#539368 = FILL_AREA_STYLE_COLOUR('',#515123); +#539369 = STYLED_ITEM('color',(#539370),#444318); +#539370 = PRESENTATION_STYLE_ASSIGNMENT((#539371)); +#539371 = SURFACE_STYLE_USAGE(.BOTH.,#539372); +#539372 = SURFACE_SIDE_STYLE('',(#539373)); +#539373 = SURFACE_STYLE_FILL_AREA(#539374); +#539374 = FILL_AREA_STYLE('',(#539375)); +#539375 = FILL_AREA_STYLE_COLOUR('',#515123); +#539376 = STYLED_ITEM('color',(#539377),#444370); +#539377 = PRESENTATION_STYLE_ASSIGNMENT((#539378)); +#539378 = SURFACE_STYLE_USAGE(.BOTH.,#539379); +#539379 = SURFACE_SIDE_STYLE('',(#539380)); +#539380 = SURFACE_STYLE_FILL_AREA(#539381); +#539381 = FILL_AREA_STYLE('',(#539382)); +#539382 = FILL_AREA_STYLE_COLOUR('',#515123); +#539383 = STYLED_ITEM('color',(#539384),#444578); +#539384 = PRESENTATION_STYLE_ASSIGNMENT((#539385)); +#539385 = SURFACE_STYLE_USAGE(.BOTH.,#539386); +#539386 = SURFACE_SIDE_STYLE('',(#539387)); +#539387 = SURFACE_STYLE_FILL_AREA(#539388); +#539388 = FILL_AREA_STYLE('',(#539389)); +#539389 = FILL_AREA_STYLE_COLOUR('',#515123); +#539390 = STYLED_ITEM('color',(#539391),#444622); +#539391 = PRESENTATION_STYLE_ASSIGNMENT((#539392)); +#539392 = SURFACE_STYLE_USAGE(.BOTH.,#539393); +#539393 = SURFACE_SIDE_STYLE('',(#539394)); +#539394 = SURFACE_STYLE_FILL_AREA(#539395); +#539395 = FILL_AREA_STYLE('',(#539396)); +#539396 = FILL_AREA_STYLE_COLOUR('',#515123); +#539397 = STYLED_ITEM('color',(#539398),#444666); +#539398 = PRESENTATION_STYLE_ASSIGNMENT((#539399)); +#539399 = SURFACE_STYLE_USAGE(.BOTH.,#539400); +#539400 = SURFACE_SIDE_STYLE('',(#539401)); +#539401 = SURFACE_STYLE_FILL_AREA(#539402); +#539402 = FILL_AREA_STYLE('',(#539403)); +#539403 = FILL_AREA_STYLE_COLOUR('',#515123); +#539404 = STYLED_ITEM('color',(#539405),#444735); +#539405 = PRESENTATION_STYLE_ASSIGNMENT((#539406)); +#539406 = SURFACE_STYLE_USAGE(.BOTH.,#539407); +#539407 = SURFACE_SIDE_STYLE('',(#539408)); +#539408 = SURFACE_STYLE_FILL_AREA(#539409); +#539409 = FILL_AREA_STYLE('',(#539410)); +#539410 = FILL_AREA_STYLE_COLOUR('',#515123); +#539411 = STYLED_ITEM('color',(#539412),#444804); +#539412 = PRESENTATION_STYLE_ASSIGNMENT((#539413)); +#539413 = SURFACE_STYLE_USAGE(.BOTH.,#539414); +#539414 = SURFACE_SIDE_STYLE('',(#539415)); +#539415 = SURFACE_STYLE_FILL_AREA(#539416); +#539416 = FILL_AREA_STYLE('',(#539417)); +#539417 = FILL_AREA_STYLE_COLOUR('',#515123); +#539418 = STYLED_ITEM('color',(#539419),#444848); +#539419 = PRESENTATION_STYLE_ASSIGNMENT((#539420)); +#539420 = SURFACE_STYLE_USAGE(.BOTH.,#539421); +#539421 = SURFACE_SIDE_STYLE('',(#539422)); +#539422 = SURFACE_STYLE_FILL_AREA(#539423); +#539423 = FILL_AREA_STYLE('',(#539424)); +#539424 = FILL_AREA_STYLE_COLOUR('',#515123); +#539425 = STYLED_ITEM('color',(#539426),#444892); +#539426 = PRESENTATION_STYLE_ASSIGNMENT((#539427)); +#539427 = SURFACE_STYLE_USAGE(.BOTH.,#539428); +#539428 = SURFACE_SIDE_STYLE('',(#539429)); +#539429 = SURFACE_STYLE_FILL_AREA(#539430); +#539430 = FILL_AREA_STYLE('',(#539431)); +#539431 = FILL_AREA_STYLE_COLOUR('',#515123); +#539432 = STYLED_ITEM('color',(#539433),#444936); +#539433 = PRESENTATION_STYLE_ASSIGNMENT((#539434)); +#539434 = SURFACE_STYLE_USAGE(.BOTH.,#539435); +#539435 = SURFACE_SIDE_STYLE('',(#539436)); +#539436 = SURFACE_STYLE_FILL_AREA(#539437); +#539437 = FILL_AREA_STYLE('',(#539438)); +#539438 = FILL_AREA_STYLE_COLOUR('',#515123); +#539439 = STYLED_ITEM('color',(#539440),#444980); +#539440 = PRESENTATION_STYLE_ASSIGNMENT((#539441)); +#539441 = SURFACE_STYLE_USAGE(.BOTH.,#539442); +#539442 = SURFACE_SIDE_STYLE('',(#539443)); +#539443 = SURFACE_STYLE_FILL_AREA(#539444); +#539444 = FILL_AREA_STYLE('',(#539445)); +#539445 = FILL_AREA_STYLE_COLOUR('',#515123); +#539446 = STYLED_ITEM('color',(#539447),#445024); +#539447 = PRESENTATION_STYLE_ASSIGNMENT((#539448)); +#539448 = SURFACE_STYLE_USAGE(.BOTH.,#539449); +#539449 = SURFACE_SIDE_STYLE('',(#539450)); +#539450 = SURFACE_STYLE_FILL_AREA(#539451); +#539451 = FILL_AREA_STYLE('',(#539452)); +#539452 = FILL_AREA_STYLE_COLOUR('',#515123); +#539453 = STYLED_ITEM('color',(#539454),#445068); +#539454 = PRESENTATION_STYLE_ASSIGNMENT((#539455)); +#539455 = SURFACE_STYLE_USAGE(.BOTH.,#539456); +#539456 = SURFACE_SIDE_STYLE('',(#539457)); +#539457 = SURFACE_STYLE_FILL_AREA(#539458); +#539458 = FILL_AREA_STYLE('',(#539459)); +#539459 = FILL_AREA_STYLE_COLOUR('',#515123); +#539460 = STYLED_ITEM('color',(#539461),#445170); +#539461 = PRESENTATION_STYLE_ASSIGNMENT((#539462)); +#539462 = SURFACE_STYLE_USAGE(.BOTH.,#539463); +#539463 = SURFACE_SIDE_STYLE('',(#539464)); +#539464 = SURFACE_STYLE_FILL_AREA(#539465); +#539465 = FILL_AREA_STYLE('',(#539466)); +#539466 = FILL_AREA_STYLE_COLOUR('',#515123); +#539467 = STYLED_ITEM('color',(#539468),#445222); +#539468 = PRESENTATION_STYLE_ASSIGNMENT((#539469)); +#539469 = SURFACE_STYLE_USAGE(.BOTH.,#539470); +#539470 = SURFACE_SIDE_STYLE('',(#539471)); +#539471 = SURFACE_STYLE_FILL_AREA(#539472); +#539472 = FILL_AREA_STYLE('',(#539473)); +#539473 = FILL_AREA_STYLE_COLOUR('',#515123); +#539474 = STYLED_ITEM('color',(#539475),#445274); +#539475 = PRESENTATION_STYLE_ASSIGNMENT((#539476)); +#539476 = SURFACE_STYLE_USAGE(.BOTH.,#539477); +#539477 = SURFACE_SIDE_STYLE('',(#539478)); +#539478 = SURFACE_STYLE_FILL_AREA(#539479); +#539479 = FILL_AREA_STYLE('',(#539480)); +#539480 = FILL_AREA_STYLE_COLOUR('',#515123); +#539481 = STYLED_ITEM('color',(#539482),#445351); +#539482 = PRESENTATION_STYLE_ASSIGNMENT((#539483)); +#539483 = SURFACE_STYLE_USAGE(.BOTH.,#539484); +#539484 = SURFACE_SIDE_STYLE('',(#539485)); +#539485 = SURFACE_STYLE_FILL_AREA(#539486); +#539486 = FILL_AREA_STYLE('',(#539487)); +#539487 = FILL_AREA_STYLE_COLOUR('',#515123); +#539488 = STYLED_ITEM('color',(#539489),#445428); +#539489 = PRESENTATION_STYLE_ASSIGNMENT((#539490)); +#539490 = SURFACE_STYLE_USAGE(.BOTH.,#539491); +#539491 = SURFACE_SIDE_STYLE('',(#539492)); +#539492 = SURFACE_STYLE_FILL_AREA(#539493); +#539493 = FILL_AREA_STYLE('',(#539494)); +#539494 = FILL_AREA_STYLE_COLOUR('',#515123); +#539495 = STYLED_ITEM('color',(#539496),#445505); +#539496 = PRESENTATION_STYLE_ASSIGNMENT((#539497)); +#539497 = SURFACE_STYLE_USAGE(.BOTH.,#539498); +#539498 = SURFACE_SIDE_STYLE('',(#539499)); +#539499 = SURFACE_STYLE_FILL_AREA(#539500); +#539500 = FILL_AREA_STYLE('',(#539501)); +#539501 = FILL_AREA_STYLE_COLOUR('',#515123); +#539502 = STYLED_ITEM('color',(#539503),#445549); +#539503 = PRESENTATION_STYLE_ASSIGNMENT((#539504)); +#539504 = SURFACE_STYLE_USAGE(.BOTH.,#539505); +#539505 = SURFACE_SIDE_STYLE('',(#539506)); +#539506 = SURFACE_STYLE_FILL_AREA(#539507); +#539507 = FILL_AREA_STYLE('',(#539508)); +#539508 = FILL_AREA_STYLE_COLOUR('',#515123); +#539509 = STYLED_ITEM('color',(#539510),#445756); +#539510 = PRESENTATION_STYLE_ASSIGNMENT((#539511)); +#539511 = SURFACE_STYLE_USAGE(.BOTH.,#539512); +#539512 = SURFACE_SIDE_STYLE('',(#539513)); +#539513 = SURFACE_STYLE_FILL_AREA(#539514); +#539514 = FILL_AREA_STYLE('',(#539515)); +#539515 = FILL_AREA_STYLE_COLOUR('',#515123); +#539516 = STYLED_ITEM('color',(#539517),#445875); +#539517 = PRESENTATION_STYLE_ASSIGNMENT((#539518)); +#539518 = SURFACE_STYLE_USAGE(.BOTH.,#539519); +#539519 = SURFACE_SIDE_STYLE('',(#539520)); +#539520 = SURFACE_STYLE_FILL_AREA(#539521); +#539521 = FILL_AREA_STYLE('',(#539522)); +#539522 = FILL_AREA_STYLE_COLOUR('',#515123); +#539523 = STYLED_ITEM('color',(#539524),#445944); +#539524 = PRESENTATION_STYLE_ASSIGNMENT((#539525)); +#539525 = SURFACE_STYLE_USAGE(.BOTH.,#539526); +#539526 = SURFACE_SIDE_STYLE('',(#539527)); +#539527 = SURFACE_STYLE_FILL_AREA(#539528); +#539528 = FILL_AREA_STYLE('',(#539529)); +#539529 = FILL_AREA_STYLE_COLOUR('',#515123); +#539530 = STYLED_ITEM('color',(#539531),#446152); +#539531 = PRESENTATION_STYLE_ASSIGNMENT((#539532)); +#539532 = SURFACE_STYLE_USAGE(.BOTH.,#539533); +#539533 = SURFACE_SIDE_STYLE('',(#539534)); +#539534 = SURFACE_STYLE_FILL_AREA(#539535); +#539535 = FILL_AREA_STYLE('',(#539536)); +#539536 = FILL_AREA_STYLE_COLOUR('',#515123); +#539537 = STYLED_ITEM('color',(#539538),#446246); +#539538 = PRESENTATION_STYLE_ASSIGNMENT((#539539)); +#539539 = SURFACE_STYLE_USAGE(.BOTH.,#539540); +#539540 = SURFACE_SIDE_STYLE('',(#539541)); +#539541 = SURFACE_STYLE_FILL_AREA(#539542); +#539542 = FILL_AREA_STYLE('',(#539543)); +#539543 = FILL_AREA_STYLE_COLOUR('',#515123); +#539544 = STYLED_ITEM('color',(#539545),#446453); +#539545 = PRESENTATION_STYLE_ASSIGNMENT((#539546)); +#539546 = SURFACE_STYLE_USAGE(.BOTH.,#539547); +#539547 = SURFACE_SIDE_STYLE('',(#539548)); +#539548 = SURFACE_STYLE_FILL_AREA(#539549); +#539549 = FILL_AREA_STYLE('',(#539550)); +#539550 = FILL_AREA_STYLE_COLOUR('',#515123); +#539551 = STYLED_ITEM('color',(#539552),#446684); +#539552 = PRESENTATION_STYLE_ASSIGNMENT((#539553)); +#539553 = SURFACE_STYLE_USAGE(.BOTH.,#539554); +#539554 = SURFACE_SIDE_STYLE('',(#539555)); +#539555 = SURFACE_STYLE_FILL_AREA(#539556); +#539556 = FILL_AREA_STYLE('',(#539557)); +#539557 = FILL_AREA_STYLE_COLOUR('',#515123); +#539558 = STYLED_ITEM('color',(#539559),#446753); +#539559 = PRESENTATION_STYLE_ASSIGNMENT((#539560)); +#539560 = SURFACE_STYLE_USAGE(.BOTH.,#539561); +#539561 = SURFACE_SIDE_STYLE('',(#539562)); +#539562 = SURFACE_STYLE_FILL_AREA(#539563); +#539563 = FILL_AREA_STYLE('',(#539564)); +#539564 = FILL_AREA_STYLE_COLOUR('',#515123); +#539565 = STYLED_ITEM('color',(#539566),#447032); +#539566 = PRESENTATION_STYLE_ASSIGNMENT((#539567)); +#539567 = SURFACE_STYLE_USAGE(.BOTH.,#539568); +#539568 = SURFACE_SIDE_STYLE('',(#539569)); +#539569 = SURFACE_STYLE_FILL_AREA(#539570); +#539570 = FILL_AREA_STYLE('',(#539571)); +#539571 = FILL_AREA_STYLE_COLOUR('',#515123); +#539572 = STYLED_ITEM('color',(#539573),#447327); +#539573 = PRESENTATION_STYLE_ASSIGNMENT((#539574)); +#539574 = SURFACE_STYLE_USAGE(.BOTH.,#539575); +#539575 = SURFACE_SIDE_STYLE('',(#539576)); +#539576 = SURFACE_STYLE_FILL_AREA(#539577); +#539577 = FILL_AREA_STYLE('',(#539578)); +#539578 = FILL_AREA_STYLE_COLOUR('',#515123); +#539579 = STYLED_ITEM('color',(#539580),#447622); +#539580 = PRESENTATION_STYLE_ASSIGNMENT((#539581)); +#539581 = SURFACE_STYLE_USAGE(.BOTH.,#539582); +#539582 = SURFACE_SIDE_STYLE('',(#539583)); +#539583 = SURFACE_STYLE_FILL_AREA(#539584); +#539584 = FILL_AREA_STYLE('',(#539585)); +#539585 = FILL_AREA_STYLE_COLOUR('',#515123); +#539586 = STYLED_ITEM('color',(#539587),#447830); +#539587 = PRESENTATION_STYLE_ASSIGNMENT((#539588)); +#539588 = SURFACE_STYLE_USAGE(.BOTH.,#539589); +#539589 = SURFACE_SIDE_STYLE('',(#539590)); +#539590 = SURFACE_STYLE_FILL_AREA(#539591); +#539591 = FILL_AREA_STYLE('',(#539592)); +#539592 = FILL_AREA_STYLE_COLOUR('',#515123); +#539593 = STYLED_ITEM('color',(#539594),#447874); +#539594 = PRESENTATION_STYLE_ASSIGNMENT((#539595)); +#539595 = SURFACE_STYLE_USAGE(.BOTH.,#539596); +#539596 = SURFACE_SIDE_STYLE('',(#539597)); +#539597 = SURFACE_STYLE_FILL_AREA(#539598); +#539598 = FILL_AREA_STYLE('',(#539599)); +#539599 = FILL_AREA_STYLE_COLOUR('',#515123); +#539600 = STYLED_ITEM('color',(#539601),#447918); +#539601 = PRESENTATION_STYLE_ASSIGNMENT((#539602)); +#539602 = SURFACE_STYLE_USAGE(.BOTH.,#539603); +#539603 = SURFACE_SIDE_STYLE('',(#539604)); +#539604 = SURFACE_STYLE_FILL_AREA(#539605); +#539605 = FILL_AREA_STYLE('',(#539606)); +#539606 = FILL_AREA_STYLE_COLOUR('',#515123); +#539607 = STYLED_ITEM('color',(#539608),#447962); +#539608 = PRESENTATION_STYLE_ASSIGNMENT((#539609)); +#539609 = SURFACE_STYLE_USAGE(.BOTH.,#539610); +#539610 = SURFACE_SIDE_STYLE('',(#539611)); +#539611 = SURFACE_STYLE_FILL_AREA(#539612); +#539612 = FILL_AREA_STYLE('',(#539613)); +#539613 = FILL_AREA_STYLE_COLOUR('',#515123); +#539614 = STYLED_ITEM('color',(#539615),#448006); +#539615 = PRESENTATION_STYLE_ASSIGNMENT((#539616)); +#539616 = SURFACE_STYLE_USAGE(.BOTH.,#539617); +#539617 = SURFACE_SIDE_STYLE('',(#539618)); +#539618 = SURFACE_STYLE_FILL_AREA(#539619); +#539619 = FILL_AREA_STYLE('',(#539620)); +#539620 = FILL_AREA_STYLE_COLOUR('',#515123); +#539621 = STYLED_ITEM('color',(#539622),#448050); +#539622 = PRESENTATION_STYLE_ASSIGNMENT((#539623)); +#539623 = SURFACE_STYLE_USAGE(.BOTH.,#539624); +#539624 = SURFACE_SIDE_STYLE('',(#539625)); +#539625 = SURFACE_STYLE_FILL_AREA(#539626); +#539626 = FILL_AREA_STYLE('',(#539627)); +#539627 = FILL_AREA_STYLE_COLOUR('',#515123); +#539628 = STYLED_ITEM('color',(#539629),#448102); +#539629 = PRESENTATION_STYLE_ASSIGNMENT((#539630)); +#539630 = SURFACE_STYLE_USAGE(.BOTH.,#539631); +#539631 = SURFACE_SIDE_STYLE('',(#539632)); +#539632 = SURFACE_STYLE_FILL_AREA(#539633); +#539633 = FILL_AREA_STYLE('',(#539634)); +#539634 = FILL_AREA_STYLE_COLOUR('',#515123); +#539635 = STYLED_ITEM('color',(#539636),#448154); +#539636 = PRESENTATION_STYLE_ASSIGNMENT((#539637)); +#539637 = SURFACE_STYLE_USAGE(.BOTH.,#539638); +#539638 = SURFACE_SIDE_STYLE('',(#539639)); +#539639 = SURFACE_STYLE_FILL_AREA(#539640); +#539640 = FILL_AREA_STYLE('',(#539641)); +#539641 = FILL_AREA_STYLE_COLOUR('',#515123); +#539642 = STYLED_ITEM('color',(#539643),#448198); +#539643 = PRESENTATION_STYLE_ASSIGNMENT((#539644)); +#539644 = SURFACE_STYLE_USAGE(.BOTH.,#539645); +#539645 = SURFACE_SIDE_STYLE('',(#539646)); +#539646 = SURFACE_STYLE_FILL_AREA(#539647); +#539647 = FILL_AREA_STYLE('',(#539648)); +#539648 = FILL_AREA_STYLE_COLOUR('',#515123); +#539649 = STYLED_ITEM('color',(#539650),#448306); +#539650 = PRESENTATION_STYLE_ASSIGNMENT((#539651)); +#539651 = SURFACE_STYLE_USAGE(.BOTH.,#539652); +#539652 = SURFACE_SIDE_STYLE('',(#539653)); +#539653 = SURFACE_STYLE_FILL_AREA(#539654); +#539654 = FILL_AREA_STYLE('',(#539655)); +#539655 = FILL_AREA_STYLE_COLOUR('',#515123); +#539656 = STYLED_ITEM('color',(#539657),#448383); +#539657 = PRESENTATION_STYLE_ASSIGNMENT((#539658)); +#539658 = SURFACE_STYLE_USAGE(.BOTH.,#539659); +#539659 = SURFACE_SIDE_STYLE('',(#539660)); +#539660 = SURFACE_STYLE_FILL_AREA(#539661); +#539661 = FILL_AREA_STYLE('',(#539662)); +#539662 = FILL_AREA_STYLE_COLOUR('',#515123); +#539663 = STYLED_ITEM('color',(#539664),#448460); +#539664 = PRESENTATION_STYLE_ASSIGNMENT((#539665)); +#539665 = SURFACE_STYLE_USAGE(.BOTH.,#539666); +#539666 = SURFACE_SIDE_STYLE('',(#539667)); +#539667 = SURFACE_STYLE_FILL_AREA(#539668); +#539668 = FILL_AREA_STYLE('',(#539669)); +#539669 = FILL_AREA_STYLE_COLOUR('',#515123); +#539670 = STYLED_ITEM('color',(#539671),#448537); +#539671 = PRESENTATION_STYLE_ASSIGNMENT((#539672)); +#539672 = SURFACE_STYLE_USAGE(.BOTH.,#539673); +#539673 = SURFACE_SIDE_STYLE('',(#539674)); +#539674 = SURFACE_STYLE_FILL_AREA(#539675); +#539675 = FILL_AREA_STYLE('',(#539676)); +#539676 = FILL_AREA_STYLE_COLOUR('',#515123); +#539677 = STYLED_ITEM('color',(#539678),#448614); +#539678 = PRESENTATION_STYLE_ASSIGNMENT((#539679)); +#539679 = SURFACE_STYLE_USAGE(.BOTH.,#539680); +#539680 = SURFACE_SIDE_STYLE('',(#539681)); +#539681 = SURFACE_STYLE_FILL_AREA(#539682); +#539682 = FILL_AREA_STYLE('',(#539683)); +#539683 = FILL_AREA_STYLE_COLOUR('',#515123); +#539684 = STYLED_ITEM('color',(#539685),#448796); +#539685 = PRESENTATION_STYLE_ASSIGNMENT((#539686)); +#539686 = SURFACE_STYLE_USAGE(.BOTH.,#539687); +#539687 = SURFACE_SIDE_STYLE('',(#539688)); +#539688 = SURFACE_STYLE_FILL_AREA(#539689); +#539689 = FILL_AREA_STYLE('',(#539690)); +#539690 = FILL_AREA_STYLE_COLOUR('',#515123); +#539691 = STYLED_ITEM('color',(#539692),#448899); +#539692 = PRESENTATION_STYLE_ASSIGNMENT((#539693)); +#539693 = SURFACE_STYLE_USAGE(.BOTH.,#539694); +#539694 = SURFACE_SIDE_STYLE('',(#539695)); +#539695 = SURFACE_STYLE_FILL_AREA(#539696); +#539696 = FILL_AREA_STYLE('',(#539697)); +#539697 = FILL_AREA_STYLE_COLOUR('',#515123); +#539698 = STYLED_ITEM('color',(#539699),#449002); +#539699 = PRESENTATION_STYLE_ASSIGNMENT((#539700)); +#539700 = SURFACE_STYLE_USAGE(.BOTH.,#539701); +#539701 = SURFACE_SIDE_STYLE('',(#539702)); +#539702 = SURFACE_STYLE_FILL_AREA(#539703); +#539703 = FILL_AREA_STYLE('',(#539704)); +#539704 = FILL_AREA_STYLE_COLOUR('',#515123); +#539705 = STYLED_ITEM('color',(#539706),#449168); +#539706 = PRESENTATION_STYLE_ASSIGNMENT((#539707)); +#539707 = SURFACE_STYLE_USAGE(.BOTH.,#539708); +#539708 = SURFACE_SIDE_STYLE('',(#539709)); +#539709 = SURFACE_STYLE_FILL_AREA(#539710); +#539710 = FILL_AREA_STYLE('',(#539711)); +#539711 = FILL_AREA_STYLE_COLOUR('',#515123); +#539712 = STYLED_ITEM('color',(#539713),#449399); +#539713 = PRESENTATION_STYLE_ASSIGNMENT((#539714)); +#539714 = SURFACE_STYLE_USAGE(.BOTH.,#539715); +#539715 = SURFACE_SIDE_STYLE('',(#539716)); +#539716 = SURFACE_STYLE_FILL_AREA(#539717); +#539717 = FILL_AREA_STYLE('',(#539718)); +#539718 = FILL_AREA_STYLE_COLOUR('',#515123); +#539719 = STYLED_ITEM('color',(#539720),#449565); +#539720 = PRESENTATION_STYLE_ASSIGNMENT((#539721)); +#539721 = SURFACE_STYLE_USAGE(.BOTH.,#539722); +#539722 = SURFACE_SIDE_STYLE('',(#539723)); +#539723 = SURFACE_STYLE_FILL_AREA(#539724); +#539724 = FILL_AREA_STYLE('',(#539725)); +#539725 = FILL_AREA_STYLE_COLOUR('',#515123); +#539726 = STYLED_ITEM('color',(#539727),#449731); +#539727 = PRESENTATION_STYLE_ASSIGNMENT((#539728)); +#539728 = SURFACE_STYLE_USAGE(.BOTH.,#539729); +#539729 = SURFACE_SIDE_STYLE('',(#539730)); +#539730 = SURFACE_STYLE_FILL_AREA(#539731); +#539731 = FILL_AREA_STYLE('',(#539732)); +#539732 = FILL_AREA_STYLE_COLOUR('',#515123); +#539733 = STYLED_ITEM('color',(#539734),#449980); +#539734 = PRESENTATION_STYLE_ASSIGNMENT((#539735)); +#539735 = SURFACE_STYLE_USAGE(.BOTH.,#539736); +#539736 = SURFACE_SIDE_STYLE('',(#539737)); +#539737 = SURFACE_STYLE_FILL_AREA(#539738); +#539738 = FILL_AREA_STYLE('',(#539739)); +#539739 = FILL_AREA_STYLE_COLOUR('',#515123); +#539740 = STYLED_ITEM('color',(#539741),#450090); +#539741 = PRESENTATION_STYLE_ASSIGNMENT((#539742)); +#539742 = SURFACE_STYLE_USAGE(.BOTH.,#539743); +#539743 = SURFACE_SIDE_STYLE('',(#539744)); +#539744 = SURFACE_STYLE_FILL_AREA(#539745); +#539745 = FILL_AREA_STYLE('',(#539746)); +#539746 = FILL_AREA_STYLE_COLOUR('',#515123); +#539747 = STYLED_ITEM('color',(#539748),#450321); +#539748 = PRESENTATION_STYLE_ASSIGNMENT((#539749)); +#539749 = SURFACE_STYLE_USAGE(.BOTH.,#539750); +#539750 = SURFACE_SIDE_STYLE('',(#539751)); +#539751 = SURFACE_STYLE_FILL_AREA(#539752); +#539752 = FILL_AREA_STYLE('',(#539753)); +#539753 = FILL_AREA_STYLE_COLOUR('',#515123); +#539754 = STYLED_ITEM('color',(#539755),#450570); +#539755 = PRESENTATION_STYLE_ASSIGNMENT((#539756)); +#539756 = SURFACE_STYLE_USAGE(.BOTH.,#539757); +#539757 = SURFACE_SIDE_STYLE('',(#539758)); +#539758 = SURFACE_STYLE_FILL_AREA(#539759); +#539759 = FILL_AREA_STYLE('',(#539760)); +#539760 = FILL_AREA_STYLE_COLOUR('',#515123); +#539761 = STYLED_ITEM('color',(#539762),#450614); +#539762 = PRESENTATION_STYLE_ASSIGNMENT((#539763)); +#539763 = SURFACE_STYLE_USAGE(.BOTH.,#539764); +#539764 = SURFACE_SIDE_STYLE('',(#539765)); +#539765 = SURFACE_STYLE_FILL_AREA(#539766); +#539766 = FILL_AREA_STYLE('',(#539767)); +#539767 = FILL_AREA_STYLE_COLOUR('',#515123); +#539768 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #539769),#13545); +#539769 = STYLED_ITEM('color',(#539770),#12680); +#539770 = PRESENTATION_STYLE_ASSIGNMENT((#539771,#539777)); +#539771 = SURFACE_STYLE_USAGE(.BOTH.,#539772); +#539772 = SURFACE_SIDE_STYLE('',(#539773)); +#539773 = SURFACE_STYLE_FILL_AREA(#539774); +#539774 = FILL_AREA_STYLE('',(#539775)); +#539775 = FILL_AREA_STYLE_COLOUR('',#539776); +#539776 = COLOUR_RGB('',0.40784314916,0.40784314916,0.40784314916); +#539777 = CURVE_STYLE('',#539778,POSITIVE_LENGTH_MEASURE(0.1),#515114); +#539778 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#539779 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #539780,#539787,#539794,#539801,#539808,#539815,#539822,#539829, + #539836,#539843,#539850,#539857,#539864,#539871,#539878,#539885, + #539892,#539899,#539906,#539913,#539920,#539927,#539934,#539941, + #539948,#539955,#539962,#539969,#539976,#539983,#539990,#539997, + #540004,#540011,#540018,#540025,#540032,#540039,#540046,#540053, + #540060,#540067,#540074,#540081,#540088,#540095,#540102,#540109, + #540116,#540123,#540130,#540137,#540144,#540151,#540158,#540165, + #540172,#540179,#540186,#540193,#540200,#540207,#540214,#540221, + #540228,#540235,#540242,#540249,#540256,#540263,#540270,#540277, + #540284,#540291,#540298,#540305,#540312,#540319,#540326,#540333, + #540340,#540347,#540354,#540361,#540368,#540375,#540382,#540389, + #540396,#540403,#540410,#540417,#540424,#540431,#540438,#540445, + #540452,#540459,#540466,#540473,#540480,#540487,#540494,#540501, + #540508,#540515,#540522,#540529,#540536,#540543,#540550,#540557, + #540564,#540571,#540578,#540585,#540592,#540599,#540606,#540613, + #540620,#540627,#540634,#540641,#540648,#540655,#540662,#540669, + #540676,#540683,#540690,#540697,#540704,#540711,#540718,#540725, + #540732,#540739,#540746,#540753,#540760,#540767,#540774,#540781, + #540788,#540795,#540802,#540809,#540816,#540823,#540830,#540837, + #540844,#540851,#540858,#540865,#540872,#540879,#540886,#540893, + #540900,#540907,#540914,#540921,#540928,#540935,#540942,#540949, + #540956,#540963,#540970,#540977,#540984,#540991,#540998,#541005, + #541012,#541019,#541026,#541033,#541040,#541047,#541054,#541061, + #541068,#541075,#541082,#541089,#541096,#541103,#541110,#541117, + #541124,#541131,#541138,#541145,#541152,#541159,#541166,#541173, + #541180,#541187,#541194,#541201,#541208,#541215,#541222,#541229, + #541236,#541243,#541250,#541257,#541264,#541271,#541278,#541285, + #541292,#541299,#541306,#541313,#541320,#541327,#541334,#541341, + #541348,#541355,#541362,#541369,#541376,#541383,#541390,#541397, + #541404,#541411,#541418,#541425,#541432,#541439,#541446,#541453, + #541460,#541467,#541474,#541481,#541488,#541495,#541502,#541509, + #541516,#541523,#541530,#541537,#541544,#541551,#541558,#541565, + #541572,#541579,#541586,#541593,#541600,#541607,#541614,#541621, + #541628,#541635,#541642,#541649,#541656,#541663,#541670,#541677, + #541684,#541691,#541698,#541705,#541712,#541719,#541726,#541733, + #541740,#541747,#541754,#541761,#541768,#541775,#541782,#541789, + #541796,#541803,#541810,#541817,#541824,#541831,#541838,#541845, + #541852,#541859,#541866,#541873,#541880,#541887,#541894,#541901, + #541908,#541915,#541922,#541929,#541936,#541943,#541950,#541957, + #541964,#541971,#541978,#541985,#541992,#541999,#542006,#542013, + #542020,#542027,#542034,#542041,#542048,#542055,#542062,#542069, + #542076,#542083,#542090,#542097,#542104,#542111,#542118,#542125, + #542132,#542139,#542146,#542153,#542160,#542167,#542174,#542181, + #542188,#542195,#542202,#542209,#542216,#542223,#542230,#542237, + #542244,#542251,#542258,#542265,#542272,#542279,#542286,#542293, + #542300,#542307,#542314,#542321,#542328,#542335,#542342,#542349, + #542356,#542363,#542370,#542377,#542384,#542391,#542398,#542405, + #542412,#542419,#542426,#542433,#542440,#542447,#542454,#542461, + #542468,#542475,#542482,#542489,#542496,#542503,#542510,#542517, + #542524,#542531,#542538,#542545,#542552,#542559,#542566,#542573, + #542580,#542587,#542594,#542601,#542608,#542615,#542622,#542629, + #542636,#542643,#542650,#542657,#542664,#542671,#542678,#542685, + #542692,#542699,#542706,#542713,#542720,#542727,#542734,#542741, + #542748,#542755,#542762,#542769,#542776,#542783,#542790,#542797, + #542804,#542811,#542818,#542825,#542832,#542839,#542846,#542853, + #542860,#542867,#542874,#542881,#542888,#542895,#542902,#542909, + #542916,#542923,#542930,#542937,#542944,#542951,#542958,#542965, + #542972,#542979,#542986,#542993,#543000,#543007,#543014,#543021, + #543028,#543035,#543042,#543049,#543056,#543063,#543070,#543077, + #543084,#543091,#543098,#543105,#543112,#543119,#543126,#543133, + #543140,#543147,#543154,#543161,#543168,#543175,#543182,#543189, + #543196,#543203,#543210),#31587); +#539780 = STYLED_ITEM('color',(#539781),#13587); +#539781 = PRESENTATION_STYLE_ASSIGNMENT((#539782)); +#539782 = SURFACE_STYLE_USAGE(.BOTH.,#539783); +#539783 = SURFACE_SIDE_STYLE('',(#539784)); +#539784 = SURFACE_STYLE_FILL_AREA(#539785); +#539785 = FILL_AREA_STYLE('',(#539786)); +#539786 = FILL_AREA_STYLE_COLOUR('',#506663); +#539787 = OVER_RIDING_STYLED_ITEM('overriding color',(#539788),#13589, + #539780); +#539788 = PRESENTATION_STYLE_ASSIGNMENT((#539789)); +#539789 = SURFACE_STYLE_USAGE(.BOTH.,#539790); +#539790 = SURFACE_SIDE_STYLE('',(#539791)); +#539791 = SURFACE_STYLE_FILL_AREA(#539792); +#539792 = FILL_AREA_STYLE('',(#539793)); +#539793 = FILL_AREA_STYLE_COLOUR('',#510377); +#539794 = OVER_RIDING_STYLED_ITEM('overriding color',(#539795),#13640, + #539780); +#539795 = PRESENTATION_STYLE_ASSIGNMENT((#539796)); +#539796 = SURFACE_STYLE_USAGE(.BOTH.,#539797); +#539797 = SURFACE_SIDE_STYLE('',(#539798)); +#539798 = SURFACE_STYLE_FILL_AREA(#539799); +#539799 = FILL_AREA_STYLE('',(#539800)); +#539800 = FILL_AREA_STYLE_COLOUR('',#510377); +#539801 = OVER_RIDING_STYLED_ITEM('overriding color',(#539802),#13691, + #539780); +#539802 = PRESENTATION_STYLE_ASSIGNMENT((#539803)); +#539803 = SURFACE_STYLE_USAGE(.BOTH.,#539804); +#539804 = SURFACE_SIDE_STYLE('',(#539805)); +#539805 = SURFACE_STYLE_FILL_AREA(#539806); +#539806 = FILL_AREA_STYLE('',(#539807)); +#539807 = FILL_AREA_STYLE_COLOUR('',#510377); +#539808 = OVER_RIDING_STYLED_ITEM('overriding color',(#539809),#13723, + #539780); +#539809 = PRESENTATION_STYLE_ASSIGNMENT((#539810)); +#539810 = SURFACE_STYLE_USAGE(.BOTH.,#539811); +#539811 = SURFACE_SIDE_STYLE('',(#539812)); +#539812 = SURFACE_STYLE_FILL_AREA(#539813); +#539813 = FILL_AREA_STYLE('',(#539814)); +#539814 = FILL_AREA_STYLE_COLOUR('',#510377); +#539815 = OVER_RIDING_STYLED_ITEM('overriding color',(#539816),#13755, + #539780); +#539816 = PRESENTATION_STYLE_ASSIGNMENT((#539817)); +#539817 = SURFACE_STYLE_USAGE(.BOTH.,#539818); +#539818 = SURFACE_SIDE_STYLE('',(#539819)); +#539819 = SURFACE_STYLE_FILL_AREA(#539820); +#539820 = FILL_AREA_STYLE('',(#539821)); +#539821 = FILL_AREA_STYLE_COLOUR('',#506663); +#539822 = OVER_RIDING_STYLED_ITEM('overriding color',(#539823),#13799, + #539780); +#539823 = PRESENTATION_STYLE_ASSIGNMENT((#539824)); +#539824 = SURFACE_STYLE_USAGE(.BOTH.,#539825); +#539825 = SURFACE_SIDE_STYLE('',(#539826)); +#539826 = SURFACE_STYLE_FILL_AREA(#539827); +#539827 = FILL_AREA_STYLE('',(#539828)); +#539828 = FILL_AREA_STYLE_COLOUR('',#506663); +#539829 = OVER_RIDING_STYLED_ITEM('overriding color',(#539830),#13837, + #539780); +#539830 = PRESENTATION_STYLE_ASSIGNMENT((#539831)); +#539831 = SURFACE_STYLE_USAGE(.BOTH.,#539832); +#539832 = SURFACE_SIDE_STYLE('',(#539833)); +#539833 = SURFACE_STYLE_FILL_AREA(#539834); +#539834 = FILL_AREA_STYLE('',(#539835)); +#539835 = FILL_AREA_STYLE_COLOUR('',#510377); +#539836 = OVER_RIDING_STYLED_ITEM('overriding color',(#539837),#13879, + #539780); +#539837 = PRESENTATION_STYLE_ASSIGNMENT((#539838)); +#539838 = SURFACE_STYLE_USAGE(.BOTH.,#539839); +#539839 = SURFACE_SIDE_STYLE('',(#539840)); +#539840 = SURFACE_STYLE_FILL_AREA(#539841); +#539841 = FILL_AREA_STYLE('',(#539842)); +#539842 = FILL_AREA_STYLE_COLOUR('',#510377); +#539843 = OVER_RIDING_STYLED_ITEM('overriding color',(#539844),#13921, + #539780); +#539844 = PRESENTATION_STYLE_ASSIGNMENT((#539845)); +#539845 = SURFACE_STYLE_USAGE(.BOTH.,#539846); +#539846 = SURFACE_SIDE_STYLE('',(#539847)); +#539847 = SURFACE_STYLE_FILL_AREA(#539848); +#539848 = FILL_AREA_STYLE('',(#539849)); +#539849 = FILL_AREA_STYLE_COLOUR('',#510377); +#539850 = OVER_RIDING_STYLED_ITEM('overriding color',(#539851),#13963, + #539780); +#539851 = PRESENTATION_STYLE_ASSIGNMENT((#539852)); +#539852 = SURFACE_STYLE_USAGE(.BOTH.,#539853); +#539853 = SURFACE_SIDE_STYLE('',(#539854)); +#539854 = SURFACE_STYLE_FILL_AREA(#539855); +#539855 = FILL_AREA_STYLE('',(#539856)); +#539856 = FILL_AREA_STYLE_COLOUR('',#510377); +#539857 = OVER_RIDING_STYLED_ITEM('overriding color',(#539858),#14613, + #539780); +#539858 = PRESENTATION_STYLE_ASSIGNMENT((#539859)); +#539859 = SURFACE_STYLE_USAGE(.BOTH.,#539860); +#539860 = SURFACE_SIDE_STYLE('',(#539861)); +#539861 = SURFACE_STYLE_FILL_AREA(#539862); +#539862 = FILL_AREA_STYLE('',(#539863)); +#539863 = FILL_AREA_STYLE_COLOUR('',#510377); +#539864 = OVER_RIDING_STYLED_ITEM('overriding color',(#539865),#14897, + #539780); +#539865 = PRESENTATION_STYLE_ASSIGNMENT((#539866)); +#539866 = SURFACE_STYLE_USAGE(.BOTH.,#539867); +#539867 = SURFACE_SIDE_STYLE('',(#539868)); +#539868 = SURFACE_STYLE_FILL_AREA(#539869); +#539869 = FILL_AREA_STYLE('',(#539870)); +#539870 = FILL_AREA_STYLE_COLOUR('',#510377); +#539871 = OVER_RIDING_STYLED_ITEM('overriding color',(#539872),#14928, + #539780); +#539872 = PRESENTATION_STYLE_ASSIGNMENT((#539873)); +#539873 = SURFACE_STYLE_USAGE(.BOTH.,#539874); +#539874 = SURFACE_SIDE_STYLE('',(#539875)); +#539875 = SURFACE_STYLE_FILL_AREA(#539876); +#539876 = FILL_AREA_STYLE('',(#539877)); +#539877 = FILL_AREA_STYLE_COLOUR('',#510377); +#539878 = OVER_RIDING_STYLED_ITEM('overriding color',(#539879),#14952, + #539780); +#539879 = PRESENTATION_STYLE_ASSIGNMENT((#539880)); +#539880 = SURFACE_STYLE_USAGE(.BOTH.,#539881); +#539881 = SURFACE_SIDE_STYLE('',(#539882)); +#539882 = SURFACE_STYLE_FILL_AREA(#539883); +#539883 = FILL_AREA_STYLE('',(#539884)); +#539884 = FILL_AREA_STYLE_COLOUR('',#510377); +#539885 = OVER_RIDING_STYLED_ITEM('overriding color',(#539886),#14976, + #539780); +#539886 = PRESENTATION_STYLE_ASSIGNMENT((#539887)); +#539887 = SURFACE_STYLE_USAGE(.BOTH.,#539888); +#539888 = SURFACE_SIDE_STYLE('',(#539889)); +#539889 = SURFACE_STYLE_FILL_AREA(#539890); +#539890 = FILL_AREA_STYLE('',(#539891)); +#539891 = FILL_AREA_STYLE_COLOUR('',#510377); +#539892 = OVER_RIDING_STYLED_ITEM('overriding color',(#539893),#15007, + #539780); +#539893 = PRESENTATION_STYLE_ASSIGNMENT((#539894)); +#539894 = SURFACE_STYLE_USAGE(.BOTH.,#539895); +#539895 = SURFACE_SIDE_STYLE('',(#539896)); +#539896 = SURFACE_STYLE_FILL_AREA(#539897); +#539897 = FILL_AREA_STYLE('',(#539898)); +#539898 = FILL_AREA_STYLE_COLOUR('',#510377); +#539899 = OVER_RIDING_STYLED_ITEM('overriding color',(#539900),#15031, + #539780); +#539900 = PRESENTATION_STYLE_ASSIGNMENT((#539901)); +#539901 = SURFACE_STYLE_USAGE(.BOTH.,#539902); +#539902 = SURFACE_SIDE_STYLE('',(#539903)); +#539903 = SURFACE_STYLE_FILL_AREA(#539904); +#539904 = FILL_AREA_STYLE('',(#539905)); +#539905 = FILL_AREA_STYLE_COLOUR('',#510377); +#539906 = OVER_RIDING_STYLED_ITEM('overriding color',(#539907),#15055, + #539780); +#539907 = PRESENTATION_STYLE_ASSIGNMENT((#539908)); +#539908 = SURFACE_STYLE_USAGE(.BOTH.,#539909); +#539909 = SURFACE_SIDE_STYLE('',(#539910)); +#539910 = SURFACE_STYLE_FILL_AREA(#539911); +#539911 = FILL_AREA_STYLE('',(#539912)); +#539912 = FILL_AREA_STYLE_COLOUR('',#510377); +#539913 = OVER_RIDING_STYLED_ITEM('overriding color',(#539914),#15086, + #539780); +#539914 = PRESENTATION_STYLE_ASSIGNMENT((#539915)); +#539915 = SURFACE_STYLE_USAGE(.BOTH.,#539916); +#539916 = SURFACE_SIDE_STYLE('',(#539917)); +#539917 = SURFACE_STYLE_FILL_AREA(#539918); +#539918 = FILL_AREA_STYLE('',(#539919)); +#539919 = FILL_AREA_STYLE_COLOUR('',#510377); +#539920 = OVER_RIDING_STYLED_ITEM('overriding color',(#539921),#15110, + #539780); +#539921 = PRESENTATION_STYLE_ASSIGNMENT((#539922)); +#539922 = SURFACE_STYLE_USAGE(.BOTH.,#539923); +#539923 = SURFACE_SIDE_STYLE('',(#539924)); +#539924 = SURFACE_STYLE_FILL_AREA(#539925); +#539925 = FILL_AREA_STYLE('',(#539926)); +#539926 = FILL_AREA_STYLE_COLOUR('',#510377); +#539927 = OVER_RIDING_STYLED_ITEM('overriding color',(#539928),#15134, + #539780); +#539928 = PRESENTATION_STYLE_ASSIGNMENT((#539929)); +#539929 = SURFACE_STYLE_USAGE(.BOTH.,#539930); +#539930 = SURFACE_SIDE_STYLE('',(#539931)); +#539931 = SURFACE_STYLE_FILL_AREA(#539932); +#539932 = FILL_AREA_STYLE('',(#539933)); +#539933 = FILL_AREA_STYLE_COLOUR('',#510377); +#539934 = OVER_RIDING_STYLED_ITEM('overriding color',(#539935),#15165, + #539780); +#539935 = PRESENTATION_STYLE_ASSIGNMENT((#539936)); +#539936 = SURFACE_STYLE_USAGE(.BOTH.,#539937); +#539937 = SURFACE_SIDE_STYLE('',(#539938)); +#539938 = SURFACE_STYLE_FILL_AREA(#539939); +#539939 = FILL_AREA_STYLE('',(#539940)); +#539940 = FILL_AREA_STYLE_COLOUR('',#510377); +#539941 = OVER_RIDING_STYLED_ITEM('overriding color',(#539942),#15189, + #539780); +#539942 = PRESENTATION_STYLE_ASSIGNMENT((#539943)); +#539943 = SURFACE_STYLE_USAGE(.BOTH.,#539944); +#539944 = SURFACE_SIDE_STYLE('',(#539945)); +#539945 = SURFACE_STYLE_FILL_AREA(#539946); +#539946 = FILL_AREA_STYLE('',(#539947)); +#539947 = FILL_AREA_STYLE_COLOUR('',#510377); +#539948 = OVER_RIDING_STYLED_ITEM('overriding color',(#539949),#15213, + #539780); +#539949 = PRESENTATION_STYLE_ASSIGNMENT((#539950)); +#539950 = SURFACE_STYLE_USAGE(.BOTH.,#539951); +#539951 = SURFACE_SIDE_STYLE('',(#539952)); +#539952 = SURFACE_STYLE_FILL_AREA(#539953); +#539953 = FILL_AREA_STYLE('',(#539954)); +#539954 = FILL_AREA_STYLE_COLOUR('',#510377); +#539955 = OVER_RIDING_STYLED_ITEM('overriding color',(#539956),#15245, + #539780); +#539956 = PRESENTATION_STYLE_ASSIGNMENT((#539957)); +#539957 = SURFACE_STYLE_USAGE(.BOTH.,#539958); +#539958 = SURFACE_SIDE_STYLE('',(#539959)); +#539959 = SURFACE_STYLE_FILL_AREA(#539960); +#539960 = FILL_AREA_STYLE('',(#539961)); +#539961 = FILL_AREA_STYLE_COLOUR('',#510377); +#539962 = OVER_RIDING_STYLED_ITEM('overriding color',(#539963),#15269, + #539780); +#539963 = PRESENTATION_STYLE_ASSIGNMENT((#539964)); +#539964 = SURFACE_STYLE_USAGE(.BOTH.,#539965); +#539965 = SURFACE_SIDE_STYLE('',(#539966)); +#539966 = SURFACE_STYLE_FILL_AREA(#539967); +#539967 = FILL_AREA_STYLE('',(#539968)); +#539968 = FILL_AREA_STYLE_COLOUR('',#510377); +#539969 = OVER_RIDING_STYLED_ITEM('overriding color',(#539970),#15294, + #539780); +#539970 = PRESENTATION_STYLE_ASSIGNMENT((#539971)); +#539971 = SURFACE_STYLE_USAGE(.BOTH.,#539972); +#539972 = SURFACE_SIDE_STYLE('',(#539973)); +#539973 = SURFACE_STYLE_FILL_AREA(#539974); +#539974 = FILL_AREA_STYLE('',(#539975)); +#539975 = FILL_AREA_STYLE_COLOUR('',#510377); +#539976 = OVER_RIDING_STYLED_ITEM('overriding color',(#539977),#15311, + #539780); +#539977 = PRESENTATION_STYLE_ASSIGNMENT((#539978)); +#539978 = SURFACE_STYLE_USAGE(.BOTH.,#539979); +#539979 = SURFACE_SIDE_STYLE('',(#539980)); +#539980 = SURFACE_STYLE_FILL_AREA(#539981); +#539981 = FILL_AREA_STYLE('',(#539982)); +#539982 = FILL_AREA_STYLE_COLOUR('',#510377); +#539983 = OVER_RIDING_STYLED_ITEM('overriding color',(#539984),#15353, + #539780); +#539984 = PRESENTATION_STYLE_ASSIGNMENT((#539985)); +#539985 = SURFACE_STYLE_USAGE(.BOTH.,#539986); +#539986 = SURFACE_SIDE_STYLE('',(#539987)); +#539987 = SURFACE_STYLE_FILL_AREA(#539988); +#539988 = FILL_AREA_STYLE('',(#539989)); +#539989 = FILL_AREA_STYLE_COLOUR('',#510377); +#539990 = OVER_RIDING_STYLED_ITEM('overriding color',(#539991),#15457, + #539780); +#539991 = PRESENTATION_STYLE_ASSIGNMENT((#539992)); +#539992 = SURFACE_STYLE_USAGE(.BOTH.,#539993); +#539993 = SURFACE_SIDE_STYLE('',(#539994)); +#539994 = SURFACE_STYLE_FILL_AREA(#539995); +#539995 = FILL_AREA_STYLE('',(#539996)); +#539996 = FILL_AREA_STYLE_COLOUR('',#510377); +#539997 = OVER_RIDING_STYLED_ITEM('overriding color',(#539998),#15485, + #539780); +#539998 = PRESENTATION_STYLE_ASSIGNMENT((#539999)); +#539999 = SURFACE_STYLE_USAGE(.BOTH.,#540000); +#540000 = SURFACE_SIDE_STYLE('',(#540001)); +#540001 = SURFACE_STYLE_FILL_AREA(#540002); +#540002 = FILL_AREA_STYLE('',(#540003)); +#540003 = FILL_AREA_STYLE_COLOUR('',#510377); +#540004 = OVER_RIDING_STYLED_ITEM('overriding color',(#540005),#15513, + #539780); +#540005 = PRESENTATION_STYLE_ASSIGNMENT((#540006)); +#540006 = SURFACE_STYLE_USAGE(.BOTH.,#540007); +#540007 = SURFACE_SIDE_STYLE('',(#540008)); +#540008 = SURFACE_STYLE_FILL_AREA(#540009); +#540009 = FILL_AREA_STYLE('',(#540010)); +#540010 = FILL_AREA_STYLE_COLOUR('',#510377); +#540011 = OVER_RIDING_STYLED_ITEM('overriding color',(#540012),#15534, + #539780); +#540012 = PRESENTATION_STYLE_ASSIGNMENT((#540013)); +#540013 = SURFACE_STYLE_USAGE(.BOTH.,#540014); +#540014 = SURFACE_SIDE_STYLE('',(#540015)); +#540015 = SURFACE_STYLE_FILL_AREA(#540016); +#540016 = FILL_AREA_STYLE('',(#540017)); +#540017 = FILL_AREA_STYLE_COLOUR('',#510377); +#540018 = OVER_RIDING_STYLED_ITEM('overriding color',(#540019),#15592, + #539780); +#540019 = PRESENTATION_STYLE_ASSIGNMENT((#540020)); +#540020 = SURFACE_STYLE_USAGE(.BOTH.,#540021); +#540021 = SURFACE_SIDE_STYLE('',(#540022)); +#540022 = SURFACE_STYLE_FILL_AREA(#540023); +#540023 = FILL_AREA_STYLE('',(#540024)); +#540024 = FILL_AREA_STYLE_COLOUR('',#510377); +#540025 = OVER_RIDING_STYLED_ITEM('overriding color',(#540026),#15632, + #539780); +#540026 = PRESENTATION_STYLE_ASSIGNMENT((#540027)); +#540027 = SURFACE_STYLE_USAGE(.BOTH.,#540028); +#540028 = SURFACE_SIDE_STYLE('',(#540029)); +#540029 = SURFACE_STYLE_FILL_AREA(#540030); +#540030 = FILL_AREA_STYLE('',(#540031)); +#540031 = FILL_AREA_STYLE_COLOUR('',#510377); +#540032 = OVER_RIDING_STYLED_ITEM('overriding color',(#540033),#15663, + #539780); +#540033 = PRESENTATION_STYLE_ASSIGNMENT((#540034)); +#540034 = SURFACE_STYLE_USAGE(.BOTH.,#540035); +#540035 = SURFACE_SIDE_STYLE('',(#540036)); +#540036 = SURFACE_STYLE_FILL_AREA(#540037); +#540037 = FILL_AREA_STYLE('',(#540038)); +#540038 = FILL_AREA_STYLE_COLOUR('',#510377); +#540039 = OVER_RIDING_STYLED_ITEM('overriding color',(#540040),#15694, + #539780); +#540040 = PRESENTATION_STYLE_ASSIGNMENT((#540041)); +#540041 = SURFACE_STYLE_USAGE(.BOTH.,#540042); +#540042 = SURFACE_SIDE_STYLE('',(#540043)); +#540043 = SURFACE_STYLE_FILL_AREA(#540044); +#540044 = FILL_AREA_STYLE('',(#540045)); +#540045 = FILL_AREA_STYLE_COLOUR('',#510377); +#540046 = OVER_RIDING_STYLED_ITEM('overriding color',(#540047),#15725, + #539780); +#540047 = PRESENTATION_STYLE_ASSIGNMENT((#540048)); +#540048 = SURFACE_STYLE_USAGE(.BOTH.,#540049); +#540049 = SURFACE_SIDE_STYLE('',(#540050)); +#540050 = SURFACE_STYLE_FILL_AREA(#540051); +#540051 = FILL_AREA_STYLE('',(#540052)); +#540052 = FILL_AREA_STYLE_COLOUR('',#510377); +#540053 = OVER_RIDING_STYLED_ITEM('overriding color',(#540054),#15756, + #539780); +#540054 = PRESENTATION_STYLE_ASSIGNMENT((#540055)); +#540055 = SURFACE_STYLE_USAGE(.BOTH.,#540056); +#540056 = SURFACE_SIDE_STYLE('',(#540057)); +#540057 = SURFACE_STYLE_FILL_AREA(#540058); +#540058 = FILL_AREA_STYLE('',(#540059)); +#540059 = FILL_AREA_STYLE_COLOUR('',#510377); +#540060 = OVER_RIDING_STYLED_ITEM('overriding color',(#540061),#15821, + #539780); +#540061 = PRESENTATION_STYLE_ASSIGNMENT((#540062)); +#540062 = SURFACE_STYLE_USAGE(.BOTH.,#540063); +#540063 = SURFACE_SIDE_STYLE('',(#540064)); +#540064 = SURFACE_STYLE_FILL_AREA(#540065); +#540065 = FILL_AREA_STYLE('',(#540066)); +#540066 = FILL_AREA_STYLE_COLOUR('',#510377); +#540067 = OVER_RIDING_STYLED_ITEM('overriding color',(#540068),#15847, + #539780); +#540068 = PRESENTATION_STYLE_ASSIGNMENT((#540069)); +#540069 = SURFACE_STYLE_USAGE(.BOTH.,#540070); +#540070 = SURFACE_SIDE_STYLE('',(#540071)); +#540071 = SURFACE_STYLE_FILL_AREA(#540072); +#540072 = FILL_AREA_STYLE('',(#540073)); +#540073 = FILL_AREA_STYLE_COLOUR('',#510377); +#540074 = OVER_RIDING_STYLED_ITEM('overriding color',(#540075),#15869, + #539780); +#540075 = PRESENTATION_STYLE_ASSIGNMENT((#540076)); +#540076 = SURFACE_STYLE_USAGE(.BOTH.,#540077); +#540077 = SURFACE_SIDE_STYLE('',(#540078)); +#540078 = SURFACE_STYLE_FILL_AREA(#540079); +#540079 = FILL_AREA_STYLE('',(#540080)); +#540080 = FILL_AREA_STYLE_COLOUR('',#510377); +#540081 = OVER_RIDING_STYLED_ITEM('overriding color',(#540082),#15883, + #539780); +#540082 = PRESENTATION_STYLE_ASSIGNMENT((#540083)); +#540083 = SURFACE_STYLE_USAGE(.BOTH.,#540084); +#540084 = SURFACE_SIDE_STYLE('',(#540085)); +#540085 = SURFACE_STYLE_FILL_AREA(#540086); +#540086 = FILL_AREA_STYLE('',(#540087)); +#540087 = FILL_AREA_STYLE_COLOUR('',#510377); +#540088 = OVER_RIDING_STYLED_ITEM('overriding color',(#540089),#15897, + #539780); +#540089 = PRESENTATION_STYLE_ASSIGNMENT((#540090)); +#540090 = SURFACE_STYLE_USAGE(.BOTH.,#540091); +#540091 = SURFACE_SIDE_STYLE('',(#540092)); +#540092 = SURFACE_STYLE_FILL_AREA(#540093); +#540093 = FILL_AREA_STYLE('',(#540094)); +#540094 = FILL_AREA_STYLE_COLOUR('',#510377); +#540095 = OVER_RIDING_STYLED_ITEM('overriding color',(#540096),#15915, + #539780); +#540096 = PRESENTATION_STYLE_ASSIGNMENT((#540097)); +#540097 = SURFACE_STYLE_USAGE(.BOTH.,#540098); +#540098 = SURFACE_SIDE_STYLE('',(#540099)); +#540099 = SURFACE_STYLE_FILL_AREA(#540100); +#540100 = FILL_AREA_STYLE('',(#540101)); +#540101 = FILL_AREA_STYLE_COLOUR('',#510377); +#540102 = OVER_RIDING_STYLED_ITEM('overriding color',(#540103),#15925, + #539780); +#540103 = PRESENTATION_STYLE_ASSIGNMENT((#540104)); +#540104 = SURFACE_STYLE_USAGE(.BOTH.,#540105); +#540105 = SURFACE_SIDE_STYLE('',(#540106)); +#540106 = SURFACE_STYLE_FILL_AREA(#540107); +#540107 = FILL_AREA_STYLE('',(#540108)); +#540108 = FILL_AREA_STYLE_COLOUR('',#510377); +#540109 = OVER_RIDING_STYLED_ITEM('overriding color',(#540110),#15943, + #539780); +#540110 = PRESENTATION_STYLE_ASSIGNMENT((#540111)); +#540111 = SURFACE_STYLE_USAGE(.BOTH.,#540112); +#540112 = SURFACE_SIDE_STYLE('',(#540113)); +#540113 = SURFACE_STYLE_FILL_AREA(#540114); +#540114 = FILL_AREA_STYLE('',(#540115)); +#540115 = FILL_AREA_STYLE_COLOUR('',#510377); +#540116 = OVER_RIDING_STYLED_ITEM('overriding color',(#540117),#15953, + #539780); +#540117 = PRESENTATION_STYLE_ASSIGNMENT((#540118)); +#540118 = SURFACE_STYLE_USAGE(.BOTH.,#540119); +#540119 = SURFACE_SIDE_STYLE('',(#540120)); +#540120 = SURFACE_STYLE_FILL_AREA(#540121); +#540121 = FILL_AREA_STYLE('',(#540122)); +#540122 = FILL_AREA_STYLE_COLOUR('',#510377); +#540123 = OVER_RIDING_STYLED_ITEM('overriding color',(#540124),#15971, + #539780); +#540124 = PRESENTATION_STYLE_ASSIGNMENT((#540125)); +#540125 = SURFACE_STYLE_USAGE(.BOTH.,#540126); +#540126 = SURFACE_SIDE_STYLE('',(#540127)); +#540127 = SURFACE_STYLE_FILL_AREA(#540128); +#540128 = FILL_AREA_STYLE('',(#540129)); +#540129 = FILL_AREA_STYLE_COLOUR('',#510377); +#540130 = OVER_RIDING_STYLED_ITEM('overriding color',(#540131),#15981, + #539780); +#540131 = PRESENTATION_STYLE_ASSIGNMENT((#540132)); +#540132 = SURFACE_STYLE_USAGE(.BOTH.,#540133); +#540133 = SURFACE_SIDE_STYLE('',(#540134)); +#540134 = SURFACE_STYLE_FILL_AREA(#540135); +#540135 = FILL_AREA_STYLE('',(#540136)); +#540136 = FILL_AREA_STYLE_COLOUR('',#506700); +#540137 = OVER_RIDING_STYLED_ITEM('overriding color',(#540138),#16023, + #539780); +#540138 = PRESENTATION_STYLE_ASSIGNMENT((#540139)); +#540139 = SURFACE_STYLE_USAGE(.BOTH.,#540140); +#540140 = SURFACE_SIDE_STYLE('',(#540141)); +#540141 = SURFACE_STYLE_FILL_AREA(#540142); +#540142 = FILL_AREA_STYLE('',(#540143)); +#540143 = FILL_AREA_STYLE_COLOUR('',#506700); +#540144 = OVER_RIDING_STYLED_ITEM('overriding color',(#540145),#16065, + #539780); +#540145 = PRESENTATION_STYLE_ASSIGNMENT((#540146)); +#540146 = SURFACE_STYLE_USAGE(.BOTH.,#540147); +#540147 = SURFACE_SIDE_STYLE('',(#540148)); +#540148 = SURFACE_STYLE_FILL_AREA(#540149); +#540149 = FILL_AREA_STYLE('',(#540150)); +#540150 = FILL_AREA_STYLE_COLOUR('',#506700); +#540151 = OVER_RIDING_STYLED_ITEM('overriding color',(#540152),#16089, + #539780); +#540152 = PRESENTATION_STYLE_ASSIGNMENT((#540153)); +#540153 = SURFACE_STYLE_USAGE(.BOTH.,#540154); +#540154 = SURFACE_SIDE_STYLE('',(#540155)); +#540155 = SURFACE_STYLE_FILL_AREA(#540156); +#540156 = FILL_AREA_STYLE('',(#540157)); +#540157 = FILL_AREA_STYLE_COLOUR('',#506700); +#540158 = OVER_RIDING_STYLED_ITEM('overriding color',(#540159),#16113, + #539780); +#540159 = PRESENTATION_STYLE_ASSIGNMENT((#540160)); +#540160 = SURFACE_STYLE_USAGE(.BOTH.,#540161); +#540161 = SURFACE_SIDE_STYLE('',(#540162)); +#540162 = SURFACE_STYLE_FILL_AREA(#540163); +#540163 = FILL_AREA_STYLE('',(#540164)); +#540164 = FILL_AREA_STYLE_COLOUR('',#506700); +#540165 = OVER_RIDING_STYLED_ITEM('overriding color',(#540166),#16130, + #539780); +#540166 = PRESENTATION_STYLE_ASSIGNMENT((#540167)); +#540167 = SURFACE_STYLE_USAGE(.BOTH.,#540168); +#540168 = SURFACE_SIDE_STYLE('',(#540169)); +#540169 = SURFACE_STYLE_FILL_AREA(#540170); +#540170 = FILL_AREA_STYLE('',(#540171)); +#540171 = FILL_AREA_STYLE_COLOUR('',#506700); +#540172 = OVER_RIDING_STYLED_ITEM('overriding color',(#540173),#16166, + #539780); +#540173 = PRESENTATION_STYLE_ASSIGNMENT((#540174)); +#540174 = SURFACE_STYLE_USAGE(.BOTH.,#540175); +#540175 = SURFACE_SIDE_STYLE('',(#540176)); +#540176 = SURFACE_STYLE_FILL_AREA(#540177); +#540177 = FILL_AREA_STYLE('',(#540178)); +#540178 = FILL_AREA_STYLE_COLOUR('',#506700); +#540179 = OVER_RIDING_STYLED_ITEM('overriding color',(#540180),#16183, + #539780); +#540180 = PRESENTATION_STYLE_ASSIGNMENT((#540181)); +#540181 = SURFACE_STYLE_USAGE(.BOTH.,#540182); +#540182 = SURFACE_SIDE_STYLE('',(#540183)); +#540183 = SURFACE_STYLE_FILL_AREA(#540184); +#540184 = FILL_AREA_STYLE('',(#540185)); +#540185 = FILL_AREA_STYLE_COLOUR('',#506700); +#540186 = OVER_RIDING_STYLED_ITEM('overriding color',(#540187),#16200, + #539780); +#540187 = PRESENTATION_STYLE_ASSIGNMENT((#540188)); +#540188 = SURFACE_STYLE_USAGE(.BOTH.,#540189); +#540189 = SURFACE_SIDE_STYLE('',(#540190)); +#540190 = SURFACE_STYLE_FILL_AREA(#540191); +#540191 = FILL_AREA_STYLE('',(#540192)); +#540192 = FILL_AREA_STYLE_COLOUR('',#506700); +#540193 = OVER_RIDING_STYLED_ITEM('overriding color',(#540194),#16217, + #539780); +#540194 = PRESENTATION_STYLE_ASSIGNMENT((#540195)); +#540195 = SURFACE_STYLE_USAGE(.BOTH.,#540196); +#540196 = SURFACE_SIDE_STYLE('',(#540197)); +#540197 = SURFACE_STYLE_FILL_AREA(#540198); +#540198 = FILL_AREA_STYLE('',(#540199)); +#540199 = FILL_AREA_STYLE_COLOUR('',#506700); +#540200 = OVER_RIDING_STYLED_ITEM('overriding color',(#540201),#16234, + #539780); +#540201 = PRESENTATION_STYLE_ASSIGNMENT((#540202)); +#540202 = SURFACE_STYLE_USAGE(.BOTH.,#540203); +#540203 = SURFACE_SIDE_STYLE('',(#540204)); +#540204 = SURFACE_STYLE_FILL_AREA(#540205); +#540205 = FILL_AREA_STYLE('',(#540206)); +#540206 = FILL_AREA_STYLE_COLOUR('',#506700); +#540207 = OVER_RIDING_STYLED_ITEM('overriding color',(#540208),#16256, + #539780); +#540208 = PRESENTATION_STYLE_ASSIGNMENT((#540209)); +#540209 = SURFACE_STYLE_USAGE(.BOTH.,#540210); +#540210 = SURFACE_SIDE_STYLE('',(#540211)); +#540211 = SURFACE_STYLE_FILL_AREA(#540212); +#540212 = FILL_AREA_STYLE('',(#540213)); +#540213 = FILL_AREA_STYLE_COLOUR('',#506700); +#540214 = OVER_RIDING_STYLED_ITEM('overriding color',(#540215),#16274, + #539780); +#540215 = PRESENTATION_STYLE_ASSIGNMENT((#540216)); +#540216 = SURFACE_STYLE_USAGE(.BOTH.,#540217); +#540217 = SURFACE_SIDE_STYLE('',(#540218)); +#540218 = SURFACE_STYLE_FILL_AREA(#540219); +#540219 = FILL_AREA_STYLE('',(#540220)); +#540220 = FILL_AREA_STYLE_COLOUR('',#506700); +#540221 = OVER_RIDING_STYLED_ITEM('overriding color',(#540222),#16291, + #539780); +#540222 = PRESENTATION_STYLE_ASSIGNMENT((#540223)); +#540223 = SURFACE_STYLE_USAGE(.BOTH.,#540224); +#540224 = SURFACE_SIDE_STYLE('',(#540225)); +#540225 = SURFACE_STYLE_FILL_AREA(#540226); +#540226 = FILL_AREA_STYLE('',(#540227)); +#540227 = FILL_AREA_STYLE_COLOUR('',#506700); +#540228 = OVER_RIDING_STYLED_ITEM('overriding color',(#540229),#16304, + #539780); +#540229 = PRESENTATION_STYLE_ASSIGNMENT((#540230)); +#540230 = SURFACE_STYLE_USAGE(.BOTH.,#540231); +#540231 = SURFACE_SIDE_STYLE('',(#540232)); +#540232 = SURFACE_STYLE_FILL_AREA(#540233); +#540233 = FILL_AREA_STYLE('',(#540234)); +#540234 = FILL_AREA_STYLE_COLOUR('',#506700); +#540235 = OVER_RIDING_STYLED_ITEM('overriding color',(#540236),#16316, + #539780); +#540236 = PRESENTATION_STYLE_ASSIGNMENT((#540237)); +#540237 = SURFACE_STYLE_USAGE(.BOTH.,#540238); +#540238 = SURFACE_SIDE_STYLE('',(#540239)); +#540239 = SURFACE_STYLE_FILL_AREA(#540240); +#540240 = FILL_AREA_STYLE('',(#540241)); +#540241 = FILL_AREA_STYLE_COLOUR('',#506700); +#540242 = OVER_RIDING_STYLED_ITEM('overriding color',(#540243),#16340, + #539780); +#540243 = PRESENTATION_STYLE_ASSIGNMENT((#540244)); +#540244 = SURFACE_STYLE_USAGE(.BOTH.,#540245); +#540245 = SURFACE_SIDE_STYLE('',(#540246)); +#540246 = SURFACE_STYLE_FILL_AREA(#540247); +#540247 = FILL_AREA_STYLE('',(#540248)); +#540248 = FILL_AREA_STYLE_COLOUR('',#506700); +#540249 = OVER_RIDING_STYLED_ITEM('overriding color',(#540250),#16364, + #539780); +#540250 = PRESENTATION_STYLE_ASSIGNMENT((#540251)); +#540251 = SURFACE_STYLE_USAGE(.BOTH.,#540252); +#540252 = SURFACE_SIDE_STYLE('',(#540253)); +#540253 = SURFACE_STYLE_FILL_AREA(#540254); +#540254 = FILL_AREA_STYLE('',(#540255)); +#540255 = FILL_AREA_STYLE_COLOUR('',#506700); +#540256 = OVER_RIDING_STYLED_ITEM('overriding color',(#540257),#16381, + #539780); +#540257 = PRESENTATION_STYLE_ASSIGNMENT((#540258)); +#540258 = SURFACE_STYLE_USAGE(.BOTH.,#540259); +#540259 = SURFACE_SIDE_STYLE('',(#540260)); +#540260 = SURFACE_STYLE_FILL_AREA(#540261); +#540261 = FILL_AREA_STYLE('',(#540262)); +#540262 = FILL_AREA_STYLE_COLOUR('',#506700); +#540263 = OVER_RIDING_STYLED_ITEM('overriding color',(#540264),#16423, + #539780); +#540264 = PRESENTATION_STYLE_ASSIGNMENT((#540265)); +#540265 = SURFACE_STYLE_USAGE(.BOTH.,#540266); +#540266 = SURFACE_SIDE_STYLE('',(#540267)); +#540267 = SURFACE_STYLE_FILL_AREA(#540268); +#540268 = FILL_AREA_STYLE('',(#540269)); +#540269 = FILL_AREA_STYLE_COLOUR('',#506700); +#540270 = OVER_RIDING_STYLED_ITEM('overriding color',(#540271),#16465, + #539780); +#540271 = PRESENTATION_STYLE_ASSIGNMENT((#540272)); +#540272 = SURFACE_STYLE_USAGE(.BOTH.,#540273); +#540273 = SURFACE_SIDE_STYLE('',(#540274)); +#540274 = SURFACE_STYLE_FILL_AREA(#540275); +#540275 = FILL_AREA_STYLE('',(#540276)); +#540276 = FILL_AREA_STYLE_COLOUR('',#506700); +#540277 = OVER_RIDING_STYLED_ITEM('overriding color',(#540278),#16501, + #539780); +#540278 = PRESENTATION_STYLE_ASSIGNMENT((#540279)); +#540279 = SURFACE_STYLE_USAGE(.BOTH.,#540280); +#540280 = SURFACE_SIDE_STYLE('',(#540281)); +#540281 = SURFACE_STYLE_FILL_AREA(#540282); +#540282 = FILL_AREA_STYLE('',(#540283)); +#540283 = FILL_AREA_STYLE_COLOUR('',#506700); +#540284 = OVER_RIDING_STYLED_ITEM('overriding color',(#540285),#16518, + #539780); +#540285 = PRESENTATION_STYLE_ASSIGNMENT((#540286)); +#540286 = SURFACE_STYLE_USAGE(.BOTH.,#540287); +#540287 = SURFACE_SIDE_STYLE('',(#540288)); +#540288 = SURFACE_STYLE_FILL_AREA(#540289); +#540289 = FILL_AREA_STYLE('',(#540290)); +#540290 = FILL_AREA_STYLE_COLOUR('',#506700); +#540291 = OVER_RIDING_STYLED_ITEM('overriding color',(#540292),#16535, + #539780); +#540292 = PRESENTATION_STYLE_ASSIGNMENT((#540293)); +#540293 = SURFACE_STYLE_USAGE(.BOTH.,#540294); +#540294 = SURFACE_SIDE_STYLE('',(#540295)); +#540295 = SURFACE_STYLE_FILL_AREA(#540296); +#540296 = FILL_AREA_STYLE('',(#540297)); +#540297 = FILL_AREA_STYLE_COLOUR('',#506700); +#540298 = OVER_RIDING_STYLED_ITEM('overriding color',(#540299),#16552, + #539780); +#540299 = PRESENTATION_STYLE_ASSIGNMENT((#540300)); +#540300 = SURFACE_STYLE_USAGE(.BOTH.,#540301); +#540301 = SURFACE_SIDE_STYLE('',(#540302)); +#540302 = SURFACE_STYLE_FILL_AREA(#540303); +#540303 = FILL_AREA_STYLE('',(#540304)); +#540304 = FILL_AREA_STYLE_COLOUR('',#506700); +#540305 = OVER_RIDING_STYLED_ITEM('overriding color',(#540306),#16569, + #539780); +#540306 = PRESENTATION_STYLE_ASSIGNMENT((#540307)); +#540307 = SURFACE_STYLE_USAGE(.BOTH.,#540308); +#540308 = SURFACE_SIDE_STYLE('',(#540309)); +#540309 = SURFACE_STYLE_FILL_AREA(#540310); +#540310 = FILL_AREA_STYLE('',(#540311)); +#540311 = FILL_AREA_STYLE_COLOUR('',#506700); +#540312 = OVER_RIDING_STYLED_ITEM('overriding color',(#540313),#16591, + #539780); +#540313 = PRESENTATION_STYLE_ASSIGNMENT((#540314)); +#540314 = SURFACE_STYLE_USAGE(.BOTH.,#540315); +#540315 = SURFACE_SIDE_STYLE('',(#540316)); +#540316 = SURFACE_STYLE_FILL_AREA(#540317); +#540317 = FILL_AREA_STYLE('',(#540318)); +#540318 = FILL_AREA_STYLE_COLOUR('',#506700); +#540319 = OVER_RIDING_STYLED_ITEM('overriding color',(#540320),#16609, + #539780); +#540320 = PRESENTATION_STYLE_ASSIGNMENT((#540321)); +#540321 = SURFACE_STYLE_USAGE(.BOTH.,#540322); +#540322 = SURFACE_SIDE_STYLE('',(#540323)); +#540323 = SURFACE_STYLE_FILL_AREA(#540324); +#540324 = FILL_AREA_STYLE('',(#540325)); +#540325 = FILL_AREA_STYLE_COLOUR('',#506700); +#540326 = OVER_RIDING_STYLED_ITEM('overriding color',(#540327),#16626, + #539780); +#540327 = PRESENTATION_STYLE_ASSIGNMENT((#540328)); +#540328 = SURFACE_STYLE_USAGE(.BOTH.,#540329); +#540329 = SURFACE_SIDE_STYLE('',(#540330)); +#540330 = SURFACE_STYLE_FILL_AREA(#540331); +#540331 = FILL_AREA_STYLE('',(#540332)); +#540332 = FILL_AREA_STYLE_COLOUR('',#506700); +#540333 = OVER_RIDING_STYLED_ITEM('overriding color',(#540334),#16639, + #539780); +#540334 = PRESENTATION_STYLE_ASSIGNMENT((#540335)); +#540335 = SURFACE_STYLE_USAGE(.BOTH.,#540336); +#540336 = SURFACE_SIDE_STYLE('',(#540337)); +#540337 = SURFACE_STYLE_FILL_AREA(#540338); +#540338 = FILL_AREA_STYLE('',(#540339)); +#540339 = FILL_AREA_STYLE_COLOUR('',#506700); +#540340 = OVER_RIDING_STYLED_ITEM('overriding color',(#540341),#16651, + #539780); +#540341 = PRESENTATION_STYLE_ASSIGNMENT((#540342)); +#540342 = SURFACE_STYLE_USAGE(.BOTH.,#540343); +#540343 = SURFACE_SIDE_STYLE('',(#540344)); +#540344 = SURFACE_STYLE_FILL_AREA(#540345); +#540345 = FILL_AREA_STYLE('',(#540346)); +#540346 = FILL_AREA_STYLE_COLOUR('',#506700); +#540347 = OVER_RIDING_STYLED_ITEM('overriding color',(#540348),#16675, + #539780); +#540348 = PRESENTATION_STYLE_ASSIGNMENT((#540349)); +#540349 = SURFACE_STYLE_USAGE(.BOTH.,#540350); +#540350 = SURFACE_SIDE_STYLE('',(#540351)); +#540351 = SURFACE_STYLE_FILL_AREA(#540352); +#540352 = FILL_AREA_STYLE('',(#540353)); +#540353 = FILL_AREA_STYLE_COLOUR('',#506700); +#540354 = OVER_RIDING_STYLED_ITEM('overriding color',(#540355),#16699, + #539780); +#540355 = PRESENTATION_STYLE_ASSIGNMENT((#540356)); +#540356 = SURFACE_STYLE_USAGE(.BOTH.,#540357); +#540357 = SURFACE_SIDE_STYLE('',(#540358)); +#540358 = SURFACE_STYLE_FILL_AREA(#540359); +#540359 = FILL_AREA_STYLE('',(#540360)); +#540360 = FILL_AREA_STYLE_COLOUR('',#506700); +#540361 = OVER_RIDING_STYLED_ITEM('overriding color',(#540362),#16716, + #539780); +#540362 = PRESENTATION_STYLE_ASSIGNMENT((#540363)); +#540363 = SURFACE_STYLE_USAGE(.BOTH.,#540364); +#540364 = SURFACE_SIDE_STYLE('',(#540365)); +#540365 = SURFACE_STYLE_FILL_AREA(#540366); +#540366 = FILL_AREA_STYLE('',(#540367)); +#540367 = FILL_AREA_STYLE_COLOUR('',#506700); +#540368 = OVER_RIDING_STYLED_ITEM('overriding color',(#540369),#16758, + #539780); +#540369 = PRESENTATION_STYLE_ASSIGNMENT((#540370)); +#540370 = SURFACE_STYLE_USAGE(.BOTH.,#540371); +#540371 = SURFACE_SIDE_STYLE('',(#540372)); +#540372 = SURFACE_STYLE_FILL_AREA(#540373); +#540373 = FILL_AREA_STYLE('',(#540374)); +#540374 = FILL_AREA_STYLE_COLOUR('',#506700); +#540375 = OVER_RIDING_STYLED_ITEM('overriding color',(#540376),#16800, + #539780); +#540376 = PRESENTATION_STYLE_ASSIGNMENT((#540377)); +#540377 = SURFACE_STYLE_USAGE(.BOTH.,#540378); +#540378 = SURFACE_SIDE_STYLE('',(#540379)); +#540379 = SURFACE_STYLE_FILL_AREA(#540380); +#540380 = FILL_AREA_STYLE('',(#540381)); +#540381 = FILL_AREA_STYLE_COLOUR('',#506700); +#540382 = OVER_RIDING_STYLED_ITEM('overriding color',(#540383),#16836, + #539780); +#540383 = PRESENTATION_STYLE_ASSIGNMENT((#540384)); +#540384 = SURFACE_STYLE_USAGE(.BOTH.,#540385); +#540385 = SURFACE_SIDE_STYLE('',(#540386)); +#540386 = SURFACE_STYLE_FILL_AREA(#540387); +#540387 = FILL_AREA_STYLE('',(#540388)); +#540388 = FILL_AREA_STYLE_COLOUR('',#506700); +#540389 = OVER_RIDING_STYLED_ITEM('overriding color',(#540390),#16853, + #539780); +#540390 = PRESENTATION_STYLE_ASSIGNMENT((#540391)); +#540391 = SURFACE_STYLE_USAGE(.BOTH.,#540392); +#540392 = SURFACE_SIDE_STYLE('',(#540393)); +#540393 = SURFACE_STYLE_FILL_AREA(#540394); +#540394 = FILL_AREA_STYLE('',(#540395)); +#540395 = FILL_AREA_STYLE_COLOUR('',#506700); +#540396 = OVER_RIDING_STYLED_ITEM('overriding color',(#540397),#16870, + #539780); +#540397 = PRESENTATION_STYLE_ASSIGNMENT((#540398)); +#540398 = SURFACE_STYLE_USAGE(.BOTH.,#540399); +#540399 = SURFACE_SIDE_STYLE('',(#540400)); +#540400 = SURFACE_STYLE_FILL_AREA(#540401); +#540401 = FILL_AREA_STYLE('',(#540402)); +#540402 = FILL_AREA_STYLE_COLOUR('',#506700); +#540403 = OVER_RIDING_STYLED_ITEM('overriding color',(#540404),#16887, + #539780); +#540404 = PRESENTATION_STYLE_ASSIGNMENT((#540405)); +#540405 = SURFACE_STYLE_USAGE(.BOTH.,#540406); +#540406 = SURFACE_SIDE_STYLE('',(#540407)); +#540407 = SURFACE_STYLE_FILL_AREA(#540408); +#540408 = FILL_AREA_STYLE('',(#540409)); +#540409 = FILL_AREA_STYLE_COLOUR('',#506700); +#540410 = OVER_RIDING_STYLED_ITEM('overriding color',(#540411),#16904, + #539780); +#540411 = PRESENTATION_STYLE_ASSIGNMENT((#540412)); +#540412 = SURFACE_STYLE_USAGE(.BOTH.,#540413); +#540413 = SURFACE_SIDE_STYLE('',(#540414)); +#540414 = SURFACE_STYLE_FILL_AREA(#540415); +#540415 = FILL_AREA_STYLE('',(#540416)); +#540416 = FILL_AREA_STYLE_COLOUR('',#506700); +#540417 = OVER_RIDING_STYLED_ITEM('overriding color',(#540418),#16926, + #539780); +#540418 = PRESENTATION_STYLE_ASSIGNMENT((#540419)); +#540419 = SURFACE_STYLE_USAGE(.BOTH.,#540420); +#540420 = SURFACE_SIDE_STYLE('',(#540421)); +#540421 = SURFACE_STYLE_FILL_AREA(#540422); +#540422 = FILL_AREA_STYLE('',(#540423)); +#540423 = FILL_AREA_STYLE_COLOUR('',#506700); +#540424 = OVER_RIDING_STYLED_ITEM('overriding color',(#540425),#16944, + #539780); +#540425 = PRESENTATION_STYLE_ASSIGNMENT((#540426)); +#540426 = SURFACE_STYLE_USAGE(.BOTH.,#540427); +#540427 = SURFACE_SIDE_STYLE('',(#540428)); +#540428 = SURFACE_STYLE_FILL_AREA(#540429); +#540429 = FILL_AREA_STYLE('',(#540430)); +#540430 = FILL_AREA_STYLE_COLOUR('',#506700); +#540431 = OVER_RIDING_STYLED_ITEM('overriding color',(#540432),#16961, + #539780); +#540432 = PRESENTATION_STYLE_ASSIGNMENT((#540433)); +#540433 = SURFACE_STYLE_USAGE(.BOTH.,#540434); +#540434 = SURFACE_SIDE_STYLE('',(#540435)); +#540435 = SURFACE_STYLE_FILL_AREA(#540436); +#540436 = FILL_AREA_STYLE('',(#540437)); +#540437 = FILL_AREA_STYLE_COLOUR('',#506700); +#540438 = OVER_RIDING_STYLED_ITEM('overriding color',(#540439),#16974, + #539780); +#540439 = PRESENTATION_STYLE_ASSIGNMENT((#540440)); +#540440 = SURFACE_STYLE_USAGE(.BOTH.,#540441); +#540441 = SURFACE_SIDE_STYLE('',(#540442)); +#540442 = SURFACE_STYLE_FILL_AREA(#540443); +#540443 = FILL_AREA_STYLE('',(#540444)); +#540444 = FILL_AREA_STYLE_COLOUR('',#506700); +#540445 = OVER_RIDING_STYLED_ITEM('overriding color',(#540446),#16986, + #539780); +#540446 = PRESENTATION_STYLE_ASSIGNMENT((#540447)); +#540447 = SURFACE_STYLE_USAGE(.BOTH.,#540448); +#540448 = SURFACE_SIDE_STYLE('',(#540449)); +#540449 = SURFACE_STYLE_FILL_AREA(#540450); +#540450 = FILL_AREA_STYLE('',(#540451)); +#540451 = FILL_AREA_STYLE_COLOUR('',#506663); +#540452 = OVER_RIDING_STYLED_ITEM('overriding color',(#540453),#16998, + #539780); +#540453 = PRESENTATION_STYLE_ASSIGNMENT((#540454)); +#540454 = SURFACE_STYLE_USAGE(.BOTH.,#540455); +#540455 = SURFACE_SIDE_STYLE('',(#540456)); +#540456 = SURFACE_STYLE_FILL_AREA(#540457); +#540457 = FILL_AREA_STYLE('',(#540458)); +#540458 = FILL_AREA_STYLE_COLOUR('',#506663); +#540459 = OVER_RIDING_STYLED_ITEM('overriding color',(#540460),#17014, + #539780); +#540460 = PRESENTATION_STYLE_ASSIGNMENT((#540461)); +#540461 = SURFACE_STYLE_USAGE(.BOTH.,#540462); +#540462 = SURFACE_SIDE_STYLE('',(#540463)); +#540463 = SURFACE_STYLE_FILL_AREA(#540464); +#540464 = FILL_AREA_STYLE('',(#540465)); +#540465 = FILL_AREA_STYLE_COLOUR('',#506663); +#540466 = OVER_RIDING_STYLED_ITEM('overriding color',(#540467),#19019, + #539780); +#540467 = PRESENTATION_STYLE_ASSIGNMENT((#540468)); +#540468 = SURFACE_STYLE_USAGE(.BOTH.,#540469); +#540469 = SURFACE_SIDE_STYLE('',(#540470)); +#540470 = SURFACE_STYLE_FILL_AREA(#540471); +#540471 = FILL_AREA_STYLE('',(#540472)); +#540472 = FILL_AREA_STYLE_COLOUR('',#510377); +#540473 = OVER_RIDING_STYLED_ITEM('overriding color',(#540474),#19033, + #539780); +#540474 = PRESENTATION_STYLE_ASSIGNMENT((#540475)); +#540475 = SURFACE_STYLE_USAGE(.BOTH.,#540476); +#540476 = SURFACE_SIDE_STYLE('',(#540477)); +#540477 = SURFACE_STYLE_FILL_AREA(#540478); +#540478 = FILL_AREA_STYLE('',(#540479)); +#540479 = FILL_AREA_STYLE_COLOUR('',#510377); +#540480 = OVER_RIDING_STYLED_ITEM('overriding color',(#540481),#19046, + #539780); +#540481 = PRESENTATION_STYLE_ASSIGNMENT((#540482)); +#540482 = SURFACE_STYLE_USAGE(.BOTH.,#540483); +#540483 = SURFACE_SIDE_STYLE('',(#540484)); +#540484 = SURFACE_STYLE_FILL_AREA(#540485); +#540485 = FILL_AREA_STYLE('',(#540486)); +#540486 = FILL_AREA_STYLE_COLOUR('',#510377); +#540487 = OVER_RIDING_STYLED_ITEM('overriding color',(#540488),#19064, + #539780); +#540488 = PRESENTATION_STYLE_ASSIGNMENT((#540489)); +#540489 = SURFACE_STYLE_USAGE(.BOTH.,#540490); +#540490 = SURFACE_SIDE_STYLE('',(#540491)); +#540491 = SURFACE_STYLE_FILL_AREA(#540492); +#540492 = FILL_AREA_STYLE('',(#540493)); +#540493 = FILL_AREA_STYLE_COLOUR('',#510377); +#540494 = OVER_RIDING_STYLED_ITEM('overriding color',(#540495),#19080, + #539780); +#540495 = PRESENTATION_STYLE_ASSIGNMENT((#540496)); +#540496 = SURFACE_STYLE_USAGE(.BOTH.,#540497); +#540497 = SURFACE_SIDE_STYLE('',(#540498)); +#540498 = SURFACE_STYLE_FILL_AREA(#540499); +#540499 = FILL_AREA_STYLE('',(#540500)); +#540500 = FILL_AREA_STYLE_COLOUR('',#510377); +#540501 = OVER_RIDING_STYLED_ITEM('overriding color',(#540502),#19098, + #539780); +#540502 = PRESENTATION_STYLE_ASSIGNMENT((#540503)); +#540503 = SURFACE_STYLE_USAGE(.BOTH.,#540504); +#540504 = SURFACE_SIDE_STYLE('',(#540505)); +#540505 = SURFACE_STYLE_FILL_AREA(#540506); +#540506 = FILL_AREA_STYLE('',(#540507)); +#540507 = FILL_AREA_STYLE_COLOUR('',#510377); +#540508 = OVER_RIDING_STYLED_ITEM('overriding color',(#540509),#19114, + #539780); +#540509 = PRESENTATION_STYLE_ASSIGNMENT((#540510)); +#540510 = SURFACE_STYLE_USAGE(.BOTH.,#540511); +#540511 = SURFACE_SIDE_STYLE('',(#540512)); +#540512 = SURFACE_STYLE_FILL_AREA(#540513); +#540513 = FILL_AREA_STYLE('',(#540514)); +#540514 = FILL_AREA_STYLE_COLOUR('',#510377); +#540515 = OVER_RIDING_STYLED_ITEM('overriding color',(#540516),#19133, + #539780); +#540516 = PRESENTATION_STYLE_ASSIGNMENT((#540517)); +#540517 = SURFACE_STYLE_USAGE(.BOTH.,#540518); +#540518 = SURFACE_SIDE_STYLE('',(#540519)); +#540519 = SURFACE_STYLE_FILL_AREA(#540520); +#540520 = FILL_AREA_STYLE('',(#540521)); +#540521 = FILL_AREA_STYLE_COLOUR('',#510377); +#540522 = STYLED_ITEM('color',(#540523),#19152); +#540523 = PRESENTATION_STYLE_ASSIGNMENT((#540524)); +#540524 = SURFACE_STYLE_USAGE(.BOTH.,#540525); +#540525 = SURFACE_SIDE_STYLE('',(#540526)); +#540526 = SURFACE_STYLE_FILL_AREA(#540527); +#540527 = FILL_AREA_STYLE('',(#540528)); +#540528 = FILL_AREA_STYLE_COLOUR('',#506663); +#540529 = OVER_RIDING_STYLED_ITEM('overriding color',(#540530),#19154, + #540522); +#540530 = PRESENTATION_STYLE_ASSIGNMENT((#540531)); +#540531 = SURFACE_STYLE_USAGE(.BOTH.,#540532); +#540532 = SURFACE_SIDE_STYLE('',(#540533)); +#540533 = SURFACE_STYLE_FILL_AREA(#540534); +#540534 = FILL_AREA_STYLE('',(#540535)); +#540535 = FILL_AREA_STYLE_COLOUR('',#506700); +#540536 = OVER_RIDING_STYLED_ITEM('overriding color',(#540537),#19196, + #540522); +#540537 = PRESENTATION_STYLE_ASSIGNMENT((#540538)); +#540538 = SURFACE_STYLE_USAGE(.BOTH.,#540539); +#540539 = SURFACE_SIDE_STYLE('',(#540540)); +#540540 = SURFACE_STYLE_FILL_AREA(#540541); +#540541 = FILL_AREA_STYLE('',(#540542)); +#540542 = FILL_AREA_STYLE_COLOUR('',#506700); +#540543 = OVER_RIDING_STYLED_ITEM('overriding color',(#540544),#20838, + #540522); +#540544 = PRESENTATION_STYLE_ASSIGNMENT((#540545)); +#540545 = SURFACE_STYLE_USAGE(.BOTH.,#540546); +#540546 = SURFACE_SIDE_STYLE('',(#540547)); +#540547 = SURFACE_STYLE_FILL_AREA(#540548); +#540548 = FILL_AREA_STYLE('',(#540549)); +#540549 = FILL_AREA_STYLE_COLOUR('',#506700); +#540550 = OVER_RIDING_STYLED_ITEM('overriding color',(#540551),#21192, + #540522); +#540551 = PRESENTATION_STYLE_ASSIGNMENT((#540552)); +#540552 = SURFACE_STYLE_USAGE(.BOTH.,#540553); +#540553 = SURFACE_SIDE_STYLE('',(#540554)); +#540554 = SURFACE_STYLE_FILL_AREA(#540555); +#540555 = FILL_AREA_STYLE('',(#540556)); +#540556 = FILL_AREA_STYLE_COLOUR('',#506700); +#540557 = OVER_RIDING_STYLED_ITEM('overriding color',(#540558),#21546, + #540522); +#540558 = PRESENTATION_STYLE_ASSIGNMENT((#540559)); +#540559 = SURFACE_STYLE_USAGE(.BOTH.,#540560); +#540560 = SURFACE_SIDE_STYLE('',(#540561)); +#540561 = SURFACE_STYLE_FILL_AREA(#540562); +#540562 = FILL_AREA_STYLE('',(#540563)); +#540563 = FILL_AREA_STYLE_COLOUR('',#506700); +#540564 = OVER_RIDING_STYLED_ITEM('overriding color',(#540565),#21568, + #540522); +#540565 = PRESENTATION_STYLE_ASSIGNMENT((#540566)); +#540566 = SURFACE_STYLE_USAGE(.BOTH.,#540567); +#540567 = SURFACE_SIDE_STYLE('',(#540568)); +#540568 = SURFACE_STYLE_FILL_AREA(#540569); +#540569 = FILL_AREA_STYLE('',(#540570)); +#540570 = FILL_AREA_STYLE_COLOUR('',#506700); +#540571 = OVER_RIDING_STYLED_ITEM('overriding color',(#540572),#21585, + #540522); +#540572 = PRESENTATION_STYLE_ASSIGNMENT((#540573)); +#540573 = SURFACE_STYLE_USAGE(.BOTH.,#540574); +#540574 = SURFACE_SIDE_STYLE('',(#540575)); +#540575 = SURFACE_STYLE_FILL_AREA(#540576); +#540576 = FILL_AREA_STYLE('',(#540577)); +#540577 = FILL_AREA_STYLE_COLOUR('',#506700); +#540578 = OVER_RIDING_STYLED_ITEM('overriding color',(#540579),#21769, + #540522); +#540579 = PRESENTATION_STYLE_ASSIGNMENT((#540580)); +#540580 = SURFACE_STYLE_USAGE(.BOTH.,#540581); +#540581 = SURFACE_SIDE_STYLE('',(#540582)); +#540582 = SURFACE_STYLE_FILL_AREA(#540583); +#540583 = FILL_AREA_STYLE('',(#540584)); +#540584 = FILL_AREA_STYLE_COLOUR('',#506700); +#540585 = OVER_RIDING_STYLED_ITEM('overriding color',(#540586),#21791, + #540522); +#540586 = PRESENTATION_STYLE_ASSIGNMENT((#540587)); +#540587 = SURFACE_STYLE_USAGE(.BOTH.,#540588); +#540588 = SURFACE_SIDE_STYLE('',(#540589)); +#540589 = SURFACE_STYLE_FILL_AREA(#540590); +#540590 = FILL_AREA_STYLE('',(#540591)); +#540591 = FILL_AREA_STYLE_COLOUR('',#506700); +#540592 = OVER_RIDING_STYLED_ITEM('overriding color',(#540593),#21813, + #540522); +#540593 = PRESENTATION_STYLE_ASSIGNMENT((#540594)); +#540594 = SURFACE_STYLE_USAGE(.BOTH.,#540595); +#540595 = SURFACE_SIDE_STYLE('',(#540596)); +#540596 = SURFACE_STYLE_FILL_AREA(#540597); +#540597 = FILL_AREA_STYLE('',(#540598)); +#540598 = FILL_AREA_STYLE_COLOUR('',#506700); +#540599 = OVER_RIDING_STYLED_ITEM('overriding color',(#540600),#21835, + #540522); +#540600 = PRESENTATION_STYLE_ASSIGNMENT((#540601)); +#540601 = SURFACE_STYLE_USAGE(.BOTH.,#540602); +#540602 = SURFACE_SIDE_STYLE('',(#540603)); +#540603 = SURFACE_STYLE_FILL_AREA(#540604); +#540604 = FILL_AREA_STYLE('',(#540605)); +#540605 = FILL_AREA_STYLE_COLOUR('',#506700); +#540606 = OVER_RIDING_STYLED_ITEM('overriding color',(#540607),#21857, + #540522); +#540607 = PRESENTATION_STYLE_ASSIGNMENT((#540608)); +#540608 = SURFACE_STYLE_USAGE(.BOTH.,#540609); +#540609 = SURFACE_SIDE_STYLE('',(#540610)); +#540610 = SURFACE_STYLE_FILL_AREA(#540611); +#540611 = FILL_AREA_STYLE('',(#540612)); +#540612 = FILL_AREA_STYLE_COLOUR('',#506700); +#540613 = OVER_RIDING_STYLED_ITEM('overriding color',(#540614),#21879, + #540522); +#540614 = PRESENTATION_STYLE_ASSIGNMENT((#540615)); +#540615 = SURFACE_STYLE_USAGE(.BOTH.,#540616); +#540616 = SURFACE_SIDE_STYLE('',(#540617)); +#540617 = SURFACE_STYLE_FILL_AREA(#540618); +#540618 = FILL_AREA_STYLE('',(#540619)); +#540619 = FILL_AREA_STYLE_COLOUR('',#506700); +#540620 = OVER_RIDING_STYLED_ITEM('overriding color',(#540621),#21901, + #540522); +#540621 = PRESENTATION_STYLE_ASSIGNMENT((#540622)); +#540622 = SURFACE_STYLE_USAGE(.BOTH.,#540623); +#540623 = SURFACE_SIDE_STYLE('',(#540624)); +#540624 = SURFACE_STYLE_FILL_AREA(#540625); +#540625 = FILL_AREA_STYLE('',(#540626)); +#540626 = FILL_AREA_STYLE_COLOUR('',#506700); +#540627 = OVER_RIDING_STYLED_ITEM('overriding color',(#540628),#21923, + #540522); +#540628 = PRESENTATION_STYLE_ASSIGNMENT((#540629)); +#540629 = SURFACE_STYLE_USAGE(.BOTH.,#540630); +#540630 = SURFACE_SIDE_STYLE('',(#540631)); +#540631 = SURFACE_STYLE_FILL_AREA(#540632); +#540632 = FILL_AREA_STYLE('',(#540633)); +#540633 = FILL_AREA_STYLE_COLOUR('',#506700); +#540634 = OVER_RIDING_STYLED_ITEM('overriding color',(#540635),#21945, + #540522); +#540635 = PRESENTATION_STYLE_ASSIGNMENT((#540636)); +#540636 = SURFACE_STYLE_USAGE(.BOTH.,#540637); +#540637 = SURFACE_SIDE_STYLE('',(#540638)); +#540638 = SURFACE_STYLE_FILL_AREA(#540639); +#540639 = FILL_AREA_STYLE('',(#540640)); +#540640 = FILL_AREA_STYLE_COLOUR('',#506700); +#540641 = OVER_RIDING_STYLED_ITEM('overriding color',(#540642),#21967, + #540522); +#540642 = PRESENTATION_STYLE_ASSIGNMENT((#540643)); +#540643 = SURFACE_STYLE_USAGE(.BOTH.,#540644); +#540644 = SURFACE_SIDE_STYLE('',(#540645)); +#540645 = SURFACE_STYLE_FILL_AREA(#540646); +#540646 = FILL_AREA_STYLE('',(#540647)); +#540647 = FILL_AREA_STYLE_COLOUR('',#506700); +#540648 = OVER_RIDING_STYLED_ITEM('overriding color',(#540649),#21984, + #540522); +#540649 = PRESENTATION_STYLE_ASSIGNMENT((#540650)); +#540650 = SURFACE_STYLE_USAGE(.BOTH.,#540651); +#540651 = SURFACE_SIDE_STYLE('',(#540652)); +#540652 = SURFACE_STYLE_FILL_AREA(#540653); +#540653 = FILL_AREA_STYLE('',(#540654)); +#540654 = FILL_AREA_STYLE_COLOUR('',#506700); +#540655 = OVER_RIDING_STYLED_ITEM('overriding color',(#540656),#22001, + #540522); +#540656 = PRESENTATION_STYLE_ASSIGNMENT((#540657)); +#540657 = SURFACE_STYLE_USAGE(.BOTH.,#540658); +#540658 = SURFACE_SIDE_STYLE('',(#540659)); +#540659 = SURFACE_STYLE_FILL_AREA(#540660); +#540660 = FILL_AREA_STYLE('',(#540661)); +#540661 = FILL_AREA_STYLE_COLOUR('',#506700); +#540662 = OVER_RIDING_STYLED_ITEM('overriding color',(#540663),#22023, + #540522); +#540663 = PRESENTATION_STYLE_ASSIGNMENT((#540664)); +#540664 = SURFACE_STYLE_USAGE(.BOTH.,#540665); +#540665 = SURFACE_SIDE_STYLE('',(#540666)); +#540666 = SURFACE_STYLE_FILL_AREA(#540667); +#540667 = FILL_AREA_STYLE('',(#540668)); +#540668 = FILL_AREA_STYLE_COLOUR('',#506700); +#540669 = OVER_RIDING_STYLED_ITEM('overriding color',(#540670),#22045, + #540522); +#540670 = PRESENTATION_STYLE_ASSIGNMENT((#540671)); +#540671 = SURFACE_STYLE_USAGE(.BOTH.,#540672); +#540672 = SURFACE_SIDE_STYLE('',(#540673)); +#540673 = SURFACE_STYLE_FILL_AREA(#540674); +#540674 = FILL_AREA_STYLE('',(#540675)); +#540675 = FILL_AREA_STYLE_COLOUR('',#506700); +#540676 = OVER_RIDING_STYLED_ITEM('overriding color',(#540677),#22067, + #540522); +#540677 = PRESENTATION_STYLE_ASSIGNMENT((#540678)); +#540678 = SURFACE_STYLE_USAGE(.BOTH.,#540679); +#540679 = SURFACE_SIDE_STYLE('',(#540680)); +#540680 = SURFACE_STYLE_FILL_AREA(#540681); +#540681 = FILL_AREA_STYLE('',(#540682)); +#540682 = FILL_AREA_STYLE_COLOUR('',#506700); +#540683 = OVER_RIDING_STYLED_ITEM('overriding color',(#540684),#22089, + #540522); +#540684 = PRESENTATION_STYLE_ASSIGNMENT((#540685)); +#540685 = SURFACE_STYLE_USAGE(.BOTH.,#540686); +#540686 = SURFACE_SIDE_STYLE('',(#540687)); +#540687 = SURFACE_STYLE_FILL_AREA(#540688); +#540688 = FILL_AREA_STYLE('',(#540689)); +#540689 = FILL_AREA_STYLE_COLOUR('',#506700); +#540690 = OVER_RIDING_STYLED_ITEM('overriding color',(#540691),#22111, + #540522); +#540691 = PRESENTATION_STYLE_ASSIGNMENT((#540692)); +#540692 = SURFACE_STYLE_USAGE(.BOTH.,#540693); +#540693 = SURFACE_SIDE_STYLE('',(#540694)); +#540694 = SURFACE_STYLE_FILL_AREA(#540695); +#540695 = FILL_AREA_STYLE('',(#540696)); +#540696 = FILL_AREA_STYLE_COLOUR('',#506700); +#540697 = OVER_RIDING_STYLED_ITEM('overriding color',(#540698),#22133, + #540522); +#540698 = PRESENTATION_STYLE_ASSIGNMENT((#540699)); +#540699 = SURFACE_STYLE_USAGE(.BOTH.,#540700); +#540700 = SURFACE_SIDE_STYLE('',(#540701)); +#540701 = SURFACE_STYLE_FILL_AREA(#540702); +#540702 = FILL_AREA_STYLE('',(#540703)); +#540703 = FILL_AREA_STYLE_COLOUR('',#506700); +#540704 = OVER_RIDING_STYLED_ITEM('overriding color',(#540705),#22155, + #540522); +#540705 = PRESENTATION_STYLE_ASSIGNMENT((#540706)); +#540706 = SURFACE_STYLE_USAGE(.BOTH.,#540707); +#540707 = SURFACE_SIDE_STYLE('',(#540708)); +#540708 = SURFACE_STYLE_FILL_AREA(#540709); +#540709 = FILL_AREA_STYLE('',(#540710)); +#540710 = FILL_AREA_STYLE_COLOUR('',#506700); +#540711 = OVER_RIDING_STYLED_ITEM('overriding color',(#540712),#22177, + #540522); +#540712 = PRESENTATION_STYLE_ASSIGNMENT((#540713)); +#540713 = SURFACE_STYLE_USAGE(.BOTH.,#540714); +#540714 = SURFACE_SIDE_STYLE('',(#540715)); +#540715 = SURFACE_STYLE_FILL_AREA(#540716); +#540716 = FILL_AREA_STYLE('',(#540717)); +#540717 = FILL_AREA_STYLE_COLOUR('',#506700); +#540718 = OVER_RIDING_STYLED_ITEM('overriding color',(#540719),#22194, + #540522); +#540719 = PRESENTATION_STYLE_ASSIGNMENT((#540720)); +#540720 = SURFACE_STYLE_USAGE(.BOTH.,#540721); +#540721 = SURFACE_SIDE_STYLE('',(#540722)); +#540722 = SURFACE_STYLE_FILL_AREA(#540723); +#540723 = FILL_AREA_STYLE('',(#540724)); +#540724 = FILL_AREA_STYLE_COLOUR('',#506700); +#540725 = OVER_RIDING_STYLED_ITEM('overriding color',(#540726),#22206, + #540522); +#540726 = PRESENTATION_STYLE_ASSIGNMENT((#540727)); +#540727 = SURFACE_STYLE_USAGE(.BOTH.,#540728); +#540728 = SURFACE_SIDE_STYLE('',(#540729)); +#540729 = SURFACE_STYLE_FILL_AREA(#540730); +#540730 = FILL_AREA_STYLE('',(#540731)); +#540731 = FILL_AREA_STYLE_COLOUR('',#506700); +#540732 = OVER_RIDING_STYLED_ITEM('overriding color',(#540733),#22248, + #540522); +#540733 = PRESENTATION_STYLE_ASSIGNMENT((#540734)); +#540734 = SURFACE_STYLE_USAGE(.BOTH.,#540735); +#540735 = SURFACE_SIDE_STYLE('',(#540736)); +#540736 = SURFACE_STYLE_FILL_AREA(#540737); +#540737 = FILL_AREA_STYLE('',(#540738)); +#540738 = FILL_AREA_STYLE_COLOUR('',#506700); +#540739 = OVER_RIDING_STYLED_ITEM('overriding color',(#540740),#22290, + #540522); +#540740 = PRESENTATION_STYLE_ASSIGNMENT((#540741)); +#540741 = SURFACE_STYLE_USAGE(.BOTH.,#540742); +#540742 = SURFACE_SIDE_STYLE('',(#540743)); +#540743 = SURFACE_STYLE_FILL_AREA(#540744); +#540744 = FILL_AREA_STYLE('',(#540745)); +#540745 = FILL_AREA_STYLE_COLOUR('',#506700); +#540746 = OVER_RIDING_STYLED_ITEM('overriding color',(#540747),#22332, + #540522); +#540747 = PRESENTATION_STYLE_ASSIGNMENT((#540748)); +#540748 = SURFACE_STYLE_USAGE(.BOTH.,#540749); +#540749 = SURFACE_SIDE_STYLE('',(#540750)); +#540750 = SURFACE_STYLE_FILL_AREA(#540751); +#540751 = FILL_AREA_STYLE('',(#540752)); +#540752 = FILL_AREA_STYLE_COLOUR('',#506700); +#540753 = OVER_RIDING_STYLED_ITEM('overriding color',(#540754),#22374, + #540522); +#540754 = PRESENTATION_STYLE_ASSIGNMENT((#540755)); +#540755 = SURFACE_STYLE_USAGE(.BOTH.,#540756); +#540756 = SURFACE_SIDE_STYLE('',(#540757)); +#540757 = SURFACE_STYLE_FILL_AREA(#540758); +#540758 = FILL_AREA_STYLE('',(#540759)); +#540759 = FILL_AREA_STYLE_COLOUR('',#506700); +#540760 = OVER_RIDING_STYLED_ITEM('overriding color',(#540761),#22386, + #540522); +#540761 = PRESENTATION_STYLE_ASSIGNMENT((#540762)); +#540762 = SURFACE_STYLE_USAGE(.BOTH.,#540763); +#540763 = SURFACE_SIDE_STYLE('',(#540764)); +#540764 = SURFACE_STYLE_FILL_AREA(#540765); +#540765 = FILL_AREA_STYLE('',(#540766)); +#540766 = FILL_AREA_STYLE_COLOUR('',#506700); +#540767 = OVER_RIDING_STYLED_ITEM('overriding color',(#540768),#22398, + #540522); +#540768 = PRESENTATION_STYLE_ASSIGNMENT((#540769)); +#540769 = SURFACE_STYLE_USAGE(.BOTH.,#540770); +#540770 = SURFACE_SIDE_STYLE('',(#540771)); +#540771 = SURFACE_STYLE_FILL_AREA(#540772); +#540772 = FILL_AREA_STYLE('',(#540773)); +#540773 = FILL_AREA_STYLE_COLOUR('',#506700); +#540774 = OVER_RIDING_STYLED_ITEM('overriding color',(#540775),#22410, + #540522); +#540775 = PRESENTATION_STYLE_ASSIGNMENT((#540776)); +#540776 = SURFACE_STYLE_USAGE(.BOTH.,#540777); +#540777 = SURFACE_SIDE_STYLE('',(#540778)); +#540778 = SURFACE_STYLE_FILL_AREA(#540779); +#540779 = FILL_AREA_STYLE('',(#540780)); +#540780 = FILL_AREA_STYLE_COLOUR('',#506700); +#540781 = OVER_RIDING_STYLED_ITEM('overriding color',(#540782),#22422, + #540522); +#540782 = PRESENTATION_STYLE_ASSIGNMENT((#540783)); +#540783 = SURFACE_STYLE_USAGE(.BOTH.,#540784); +#540784 = SURFACE_SIDE_STYLE('',(#540785)); +#540785 = SURFACE_STYLE_FILL_AREA(#540786); +#540786 = FILL_AREA_STYLE('',(#540787)); +#540787 = FILL_AREA_STYLE_COLOUR('',#506700); +#540788 = OVER_RIDING_STYLED_ITEM('overriding color',(#540789),#22434, + #540522); +#540789 = PRESENTATION_STYLE_ASSIGNMENT((#540790)); +#540790 = SURFACE_STYLE_USAGE(.BOTH.,#540791); +#540791 = SURFACE_SIDE_STYLE('',(#540792)); +#540792 = SURFACE_STYLE_FILL_AREA(#540793); +#540793 = FILL_AREA_STYLE('',(#540794)); +#540794 = FILL_AREA_STYLE_COLOUR('',#506700); +#540795 = OVER_RIDING_STYLED_ITEM('overriding color',(#540796),#22446, + #540522); +#540796 = PRESENTATION_STYLE_ASSIGNMENT((#540797)); +#540797 = SURFACE_STYLE_USAGE(.BOTH.,#540798); +#540798 = SURFACE_SIDE_STYLE('',(#540799)); +#540799 = SURFACE_STYLE_FILL_AREA(#540800); +#540800 = FILL_AREA_STYLE('',(#540801)); +#540801 = FILL_AREA_STYLE_COLOUR('',#506700); +#540802 = OVER_RIDING_STYLED_ITEM('overriding color',(#540803),#22458, + #540522); +#540803 = PRESENTATION_STYLE_ASSIGNMENT((#540804)); +#540804 = SURFACE_STYLE_USAGE(.BOTH.,#540805); +#540805 = SURFACE_SIDE_STYLE('',(#540806)); +#540806 = SURFACE_STYLE_FILL_AREA(#540807); +#540807 = FILL_AREA_STYLE('',(#540808)); +#540808 = FILL_AREA_STYLE_COLOUR('',#506700); +#540809 = OVER_RIDING_STYLED_ITEM('overriding color',(#540810),#22470, + #540522); +#540810 = PRESENTATION_STYLE_ASSIGNMENT((#540811)); +#540811 = SURFACE_STYLE_USAGE(.BOTH.,#540812); +#540812 = SURFACE_SIDE_STYLE('',(#540813)); +#540813 = SURFACE_STYLE_FILL_AREA(#540814); +#540814 = FILL_AREA_STYLE('',(#540815)); +#540815 = FILL_AREA_STYLE_COLOUR('',#506700); +#540816 = OVER_RIDING_STYLED_ITEM('overriding color',(#540817),#22482, + #540522); +#540817 = PRESENTATION_STYLE_ASSIGNMENT((#540818)); +#540818 = SURFACE_STYLE_USAGE(.BOTH.,#540819); +#540819 = SURFACE_SIDE_STYLE('',(#540820)); +#540820 = SURFACE_STYLE_FILL_AREA(#540821); +#540821 = FILL_AREA_STYLE('',(#540822)); +#540822 = FILL_AREA_STYLE_COLOUR('',#506700); +#540823 = OVER_RIDING_STYLED_ITEM('overriding color',(#540824),#22494, + #540522); +#540824 = PRESENTATION_STYLE_ASSIGNMENT((#540825)); +#540825 = SURFACE_STYLE_USAGE(.BOTH.,#540826); +#540826 = SURFACE_SIDE_STYLE('',(#540827)); +#540827 = SURFACE_STYLE_FILL_AREA(#540828); +#540828 = FILL_AREA_STYLE('',(#540829)); +#540829 = FILL_AREA_STYLE_COLOUR('',#506700); +#540830 = OVER_RIDING_STYLED_ITEM('overriding color',(#540831),#22506, + #540522); +#540831 = PRESENTATION_STYLE_ASSIGNMENT((#540832)); +#540832 = SURFACE_STYLE_USAGE(.BOTH.,#540833); +#540833 = SURFACE_SIDE_STYLE('',(#540834)); +#540834 = SURFACE_STYLE_FILL_AREA(#540835); +#540835 = FILL_AREA_STYLE('',(#540836)); +#540836 = FILL_AREA_STYLE_COLOUR('',#506700); +#540837 = OVER_RIDING_STYLED_ITEM('overriding color',(#540838),#22518, + #540522); +#540838 = PRESENTATION_STYLE_ASSIGNMENT((#540839)); +#540839 = SURFACE_STYLE_USAGE(.BOTH.,#540840); +#540840 = SURFACE_SIDE_STYLE('',(#540841)); +#540841 = SURFACE_STYLE_FILL_AREA(#540842); +#540842 = FILL_AREA_STYLE('',(#540843)); +#540843 = FILL_AREA_STYLE_COLOUR('',#506700); +#540844 = OVER_RIDING_STYLED_ITEM('overriding color',(#540845),#22530, + #540522); +#540845 = PRESENTATION_STYLE_ASSIGNMENT((#540846)); +#540846 = SURFACE_STYLE_USAGE(.BOTH.,#540847); +#540847 = SURFACE_SIDE_STYLE('',(#540848)); +#540848 = SURFACE_STYLE_FILL_AREA(#540849); +#540849 = FILL_AREA_STYLE('',(#540850)); +#540850 = FILL_AREA_STYLE_COLOUR('',#506700); +#540851 = OVER_RIDING_STYLED_ITEM('overriding color',(#540852),#22542, + #540522); +#540852 = PRESENTATION_STYLE_ASSIGNMENT((#540853)); +#540853 = SURFACE_STYLE_USAGE(.BOTH.,#540854); +#540854 = SURFACE_SIDE_STYLE('',(#540855)); +#540855 = SURFACE_STYLE_FILL_AREA(#540856); +#540856 = FILL_AREA_STYLE('',(#540857)); +#540857 = FILL_AREA_STYLE_COLOUR('',#506700); +#540858 = OVER_RIDING_STYLED_ITEM('overriding color',(#540859),#22554, + #540522); +#540859 = PRESENTATION_STYLE_ASSIGNMENT((#540860)); +#540860 = SURFACE_STYLE_USAGE(.BOTH.,#540861); +#540861 = SURFACE_SIDE_STYLE('',(#540862)); +#540862 = SURFACE_STYLE_FILL_AREA(#540863); +#540863 = FILL_AREA_STYLE('',(#540864)); +#540864 = FILL_AREA_STYLE_COLOUR('',#506700); +#540865 = OVER_RIDING_STYLED_ITEM('overriding color',(#540866),#22566, + #540522); +#540866 = PRESENTATION_STYLE_ASSIGNMENT((#540867)); +#540867 = SURFACE_STYLE_USAGE(.BOTH.,#540868); +#540868 = SURFACE_SIDE_STYLE('',(#540869)); +#540869 = SURFACE_STYLE_FILL_AREA(#540870); +#540870 = FILL_AREA_STYLE('',(#540871)); +#540871 = FILL_AREA_STYLE_COLOUR('',#506700); +#540872 = OVER_RIDING_STYLED_ITEM('overriding color',(#540873),#22597, + #540522); +#540873 = PRESENTATION_STYLE_ASSIGNMENT((#540874)); +#540874 = SURFACE_STYLE_USAGE(.BOTH.,#540875); +#540875 = SURFACE_SIDE_STYLE('',(#540876)); +#540876 = SURFACE_STYLE_FILL_AREA(#540877); +#540877 = FILL_AREA_STYLE('',(#540878)); +#540878 = FILL_AREA_STYLE_COLOUR('',#506700); +#540879 = OVER_RIDING_STYLED_ITEM('overriding color',(#540880),#22628, + #540522); +#540880 = PRESENTATION_STYLE_ASSIGNMENT((#540881)); +#540881 = SURFACE_STYLE_USAGE(.BOTH.,#540882); +#540882 = SURFACE_SIDE_STYLE('',(#540883)); +#540883 = SURFACE_STYLE_FILL_AREA(#540884); +#540884 = FILL_AREA_STYLE('',(#540885)); +#540885 = FILL_AREA_STYLE_COLOUR('',#506700); +#540886 = OVER_RIDING_STYLED_ITEM('overriding color',(#540887),#22659, + #540522); +#540887 = PRESENTATION_STYLE_ASSIGNMENT((#540888)); +#540888 = SURFACE_STYLE_USAGE(.BOTH.,#540889); +#540889 = SURFACE_SIDE_STYLE('',(#540890)); +#540890 = SURFACE_STYLE_FILL_AREA(#540891); +#540891 = FILL_AREA_STYLE('',(#540892)); +#540892 = FILL_AREA_STYLE_COLOUR('',#506700); +#540893 = OVER_RIDING_STYLED_ITEM('overriding color',(#540894),#22690, + #540522); +#540894 = PRESENTATION_STYLE_ASSIGNMENT((#540895)); +#540895 = SURFACE_STYLE_USAGE(.BOTH.,#540896); +#540896 = SURFACE_SIDE_STYLE('',(#540897)); +#540897 = SURFACE_STYLE_FILL_AREA(#540898); +#540898 = FILL_AREA_STYLE('',(#540899)); +#540899 = FILL_AREA_STYLE_COLOUR('',#506700); +#540900 = OVER_RIDING_STYLED_ITEM('overriding color',(#540901),#22721, + #540522); +#540901 = PRESENTATION_STYLE_ASSIGNMENT((#540902)); +#540902 = SURFACE_STYLE_USAGE(.BOTH.,#540903); +#540903 = SURFACE_SIDE_STYLE('',(#540904)); +#540904 = SURFACE_STYLE_FILL_AREA(#540905); +#540905 = FILL_AREA_STYLE('',(#540906)); +#540906 = FILL_AREA_STYLE_COLOUR('',#506700); +#540907 = OVER_RIDING_STYLED_ITEM('overriding color',(#540908),#22763, + #540522); +#540908 = PRESENTATION_STYLE_ASSIGNMENT((#540909)); +#540909 = SURFACE_STYLE_USAGE(.BOTH.,#540910); +#540910 = SURFACE_SIDE_STYLE('',(#540911)); +#540911 = SURFACE_STYLE_FILL_AREA(#540912); +#540912 = FILL_AREA_STYLE('',(#540913)); +#540913 = FILL_AREA_STYLE_COLOUR('',#506700); +#540914 = OVER_RIDING_STYLED_ITEM('overriding color',(#540915),#22830, + #540522); +#540915 = PRESENTATION_STYLE_ASSIGNMENT((#540916)); +#540916 = SURFACE_STYLE_USAGE(.BOTH.,#540917); +#540917 = SURFACE_SIDE_STYLE('',(#540918)); +#540918 = SURFACE_STYLE_FILL_AREA(#540919); +#540919 = FILL_AREA_STYLE('',(#540920)); +#540920 = FILL_AREA_STYLE_COLOUR('',#506700); +#540921 = OVER_RIDING_STYLED_ITEM('overriding color',(#540922),#22872, + #540522); +#540922 = PRESENTATION_STYLE_ASSIGNMENT((#540923)); +#540923 = SURFACE_STYLE_USAGE(.BOTH.,#540924); +#540924 = SURFACE_SIDE_STYLE('',(#540925)); +#540925 = SURFACE_STYLE_FILL_AREA(#540926); +#540926 = FILL_AREA_STYLE('',(#540927)); +#540927 = FILL_AREA_STYLE_COLOUR('',#506700); +#540928 = OVER_RIDING_STYLED_ITEM('overriding color',(#540929),#22903, + #540522); +#540929 = PRESENTATION_STYLE_ASSIGNMENT((#540930)); +#540930 = SURFACE_STYLE_USAGE(.BOTH.,#540931); +#540931 = SURFACE_SIDE_STYLE('',(#540932)); +#540932 = SURFACE_STYLE_FILL_AREA(#540933); +#540933 = FILL_AREA_STYLE('',(#540934)); +#540934 = FILL_AREA_STYLE_COLOUR('',#506700); +#540935 = OVER_RIDING_STYLED_ITEM('overriding color',(#540936),#22934, + #540522); +#540936 = PRESENTATION_STYLE_ASSIGNMENT((#540937)); +#540937 = SURFACE_STYLE_USAGE(.BOTH.,#540938); +#540938 = SURFACE_SIDE_STYLE('',(#540939)); +#540939 = SURFACE_STYLE_FILL_AREA(#540940); +#540940 = FILL_AREA_STYLE('',(#540941)); +#540941 = FILL_AREA_STYLE_COLOUR('',#506700); +#540942 = OVER_RIDING_STYLED_ITEM('overriding color',(#540943),#23039, + #540522); +#540943 = PRESENTATION_STYLE_ASSIGNMENT((#540944)); +#540944 = SURFACE_STYLE_USAGE(.BOTH.,#540945); +#540945 = SURFACE_SIDE_STYLE('',(#540946)); +#540946 = SURFACE_STYLE_FILL_AREA(#540947); +#540947 = FILL_AREA_STYLE('',(#540948)); +#540948 = FILL_AREA_STYLE_COLOUR('',#506700); +#540949 = OVER_RIDING_STYLED_ITEM('overriding color',(#540950),#23079, + #540522); +#540950 = PRESENTATION_STYLE_ASSIGNMENT((#540951)); +#540951 = SURFACE_STYLE_USAGE(.BOTH.,#540952); +#540952 = SURFACE_SIDE_STYLE('',(#540953)); +#540953 = SURFACE_STYLE_FILL_AREA(#540954); +#540954 = FILL_AREA_STYLE('',(#540955)); +#540955 = FILL_AREA_STYLE_COLOUR('',#506700); +#540956 = OVER_RIDING_STYLED_ITEM('overriding color',(#540957),#23128, + #540522); +#540957 = PRESENTATION_STYLE_ASSIGNMENT((#540958)); +#540958 = SURFACE_STYLE_USAGE(.BOTH.,#540959); +#540959 = SURFACE_SIDE_STYLE('',(#540960)); +#540960 = SURFACE_STYLE_FILL_AREA(#540961); +#540961 = FILL_AREA_STYLE('',(#540962)); +#540962 = FILL_AREA_STYLE_COLOUR('',#506700); +#540963 = OVER_RIDING_STYLED_ITEM('overriding color',(#540964),#23159, + #540522); +#540964 = PRESENTATION_STYLE_ASSIGNMENT((#540965)); +#540965 = SURFACE_STYLE_USAGE(.BOTH.,#540966); +#540966 = SURFACE_SIDE_STYLE('',(#540967)); +#540967 = SURFACE_STYLE_FILL_AREA(#540968); +#540968 = FILL_AREA_STYLE('',(#540969)); +#540969 = FILL_AREA_STYLE_COLOUR('',#506700); +#540970 = OVER_RIDING_STYLED_ITEM('overriding color',(#540971),#23199, + #540522); +#540971 = PRESENTATION_STYLE_ASSIGNMENT((#540972)); +#540972 = SURFACE_STYLE_USAGE(.BOTH.,#540973); +#540973 = SURFACE_SIDE_STYLE('',(#540974)); +#540974 = SURFACE_STYLE_FILL_AREA(#540975); +#540975 = FILL_AREA_STYLE('',(#540976)); +#540976 = FILL_AREA_STYLE_COLOUR('',#506700); +#540977 = OVER_RIDING_STYLED_ITEM('overriding color',(#540978),#23232, + #540522); +#540978 = PRESENTATION_STYLE_ASSIGNMENT((#540979)); +#540979 = SURFACE_STYLE_USAGE(.BOTH.,#540980); +#540980 = SURFACE_SIDE_STYLE('',(#540981)); +#540981 = SURFACE_STYLE_FILL_AREA(#540982); +#540982 = FILL_AREA_STYLE('',(#540983)); +#540983 = FILL_AREA_STYLE_COLOUR('',#506700); +#540984 = OVER_RIDING_STYLED_ITEM('overriding color',(#540985),#23257, + #540522); +#540985 = PRESENTATION_STYLE_ASSIGNMENT((#540986)); +#540986 = SURFACE_STYLE_USAGE(.BOTH.,#540987); +#540987 = SURFACE_SIDE_STYLE('',(#540988)); +#540988 = SURFACE_STYLE_FILL_AREA(#540989); +#540989 = FILL_AREA_STYLE('',(#540990)); +#540990 = FILL_AREA_STYLE_COLOUR('',#506700); +#540991 = OVER_RIDING_STYLED_ITEM('overriding color',(#540992),#23282, + #540522); +#540992 = PRESENTATION_STYLE_ASSIGNMENT((#540993)); +#540993 = SURFACE_STYLE_USAGE(.BOTH.,#540994); +#540994 = SURFACE_SIDE_STYLE('',(#540995)); +#540995 = SURFACE_STYLE_FILL_AREA(#540996); +#540996 = FILL_AREA_STYLE('',(#540997)); +#540997 = FILL_AREA_STYLE_COLOUR('',#506700); +#540998 = OVER_RIDING_STYLED_ITEM('overriding color',(#540999),#23299, + #540522); +#540999 = PRESENTATION_STYLE_ASSIGNMENT((#541000)); +#541000 = SURFACE_STYLE_USAGE(.BOTH.,#541001); +#541001 = SURFACE_SIDE_STYLE('',(#541002)); +#541002 = SURFACE_STYLE_FILL_AREA(#541003); +#541003 = FILL_AREA_STYLE('',(#541004)); +#541004 = FILL_AREA_STYLE_COLOUR('',#506700); +#541005 = OVER_RIDING_STYLED_ITEM('overriding color',(#541006),#23321, + #540522); +#541006 = PRESENTATION_STYLE_ASSIGNMENT((#541007)); +#541007 = SURFACE_STYLE_USAGE(.BOTH.,#541008); +#541008 = SURFACE_SIDE_STYLE('',(#541009)); +#541009 = SURFACE_STYLE_FILL_AREA(#541010); +#541010 = FILL_AREA_STYLE('',(#541011)); +#541011 = FILL_AREA_STYLE_COLOUR('',#506700); +#541012 = OVER_RIDING_STYLED_ITEM('overriding color',(#541013),#23343, + #540522); +#541013 = PRESENTATION_STYLE_ASSIGNMENT((#541014)); +#541014 = SURFACE_STYLE_USAGE(.BOTH.,#541015); +#541015 = SURFACE_SIDE_STYLE('',(#541016)); +#541016 = SURFACE_STYLE_FILL_AREA(#541017); +#541017 = FILL_AREA_STYLE('',(#541018)); +#541018 = FILL_AREA_STYLE_COLOUR('',#506700); +#541019 = OVER_RIDING_STYLED_ITEM('overriding color',(#541020),#23360, + #540522); +#541020 = PRESENTATION_STYLE_ASSIGNMENT((#541021)); +#541021 = SURFACE_STYLE_USAGE(.BOTH.,#541022); +#541022 = SURFACE_SIDE_STYLE('',(#541023)); +#541023 = SURFACE_STYLE_FILL_AREA(#541024); +#541024 = FILL_AREA_STYLE('',(#541025)); +#541025 = FILL_AREA_STYLE_COLOUR('',#506700); +#541026 = OVER_RIDING_STYLED_ITEM('overriding color',(#541027),#23377, + #540522); +#541027 = PRESENTATION_STYLE_ASSIGNMENT((#541028)); +#541028 = SURFACE_STYLE_USAGE(.BOTH.,#541029); +#541029 = SURFACE_SIDE_STYLE('',(#541030)); +#541030 = SURFACE_STYLE_FILL_AREA(#541031); +#541031 = FILL_AREA_STYLE('',(#541032)); +#541032 = FILL_AREA_STYLE_COLOUR('',#506700); +#541033 = OVER_RIDING_STYLED_ITEM('overriding color',(#541034),#23396, + #540522); +#541034 = PRESENTATION_STYLE_ASSIGNMENT((#541035)); +#541035 = SURFACE_STYLE_USAGE(.BOTH.,#541036); +#541036 = SURFACE_SIDE_STYLE('',(#541037)); +#541037 = SURFACE_STYLE_FILL_AREA(#541038); +#541038 = FILL_AREA_STYLE('',(#541039)); +#541039 = FILL_AREA_STYLE_COLOUR('',#506700); +#541040 = OVER_RIDING_STYLED_ITEM('overriding color',(#541041),#23415, + #540522); +#541041 = PRESENTATION_STYLE_ASSIGNMENT((#541042)); +#541042 = SURFACE_STYLE_USAGE(.BOTH.,#541043); +#541043 = SURFACE_SIDE_STYLE('',(#541044)); +#541044 = SURFACE_STYLE_FILL_AREA(#541045); +#541045 = FILL_AREA_STYLE('',(#541046)); +#541046 = FILL_AREA_STYLE_COLOUR('',#506700); +#541047 = OVER_RIDING_STYLED_ITEM('overriding color',(#541048),#23437, + #540522); +#541048 = PRESENTATION_STYLE_ASSIGNMENT((#541049)); +#541049 = SURFACE_STYLE_USAGE(.BOTH.,#541050); +#541050 = SURFACE_SIDE_STYLE('',(#541051)); +#541051 = SURFACE_STYLE_FILL_AREA(#541052); +#541052 = FILL_AREA_STYLE('',(#541053)); +#541053 = FILL_AREA_STYLE_COLOUR('',#506700); +#541054 = OVER_RIDING_STYLED_ITEM('overriding color',(#541055),#23477, + #540522); +#541055 = PRESENTATION_STYLE_ASSIGNMENT((#541056)); +#541056 = SURFACE_STYLE_USAGE(.BOTH.,#541057); +#541057 = SURFACE_SIDE_STYLE('',(#541058)); +#541058 = SURFACE_STYLE_FILL_AREA(#541059); +#541059 = FILL_AREA_STYLE('',(#541060)); +#541060 = FILL_AREA_STYLE_COLOUR('',#506700); +#541061 = OVER_RIDING_STYLED_ITEM('overriding color',(#541062),#23526, + #540522); +#541062 = PRESENTATION_STYLE_ASSIGNMENT((#541063)); +#541063 = SURFACE_STYLE_USAGE(.BOTH.,#541064); +#541064 = SURFACE_SIDE_STYLE('',(#541065)); +#541065 = SURFACE_STYLE_FILL_AREA(#541066); +#541066 = FILL_AREA_STYLE('',(#541067)); +#541067 = FILL_AREA_STYLE_COLOUR('',#506700); +#541068 = OVER_RIDING_STYLED_ITEM('overriding color',(#541069),#23557, + #540522); +#541069 = PRESENTATION_STYLE_ASSIGNMENT((#541070)); +#541070 = SURFACE_STYLE_USAGE(.BOTH.,#541071); +#541071 = SURFACE_SIDE_STYLE('',(#541072)); +#541072 = SURFACE_STYLE_FILL_AREA(#541073); +#541073 = FILL_AREA_STYLE('',(#541074)); +#541074 = FILL_AREA_STYLE_COLOUR('',#506700); +#541075 = OVER_RIDING_STYLED_ITEM('overriding color',(#541076),#23597, + #540522); +#541076 = PRESENTATION_STYLE_ASSIGNMENT((#541077)); +#541077 = SURFACE_STYLE_USAGE(.BOTH.,#541078); +#541078 = SURFACE_SIDE_STYLE('',(#541079)); +#541079 = SURFACE_STYLE_FILL_AREA(#541080); +#541080 = FILL_AREA_STYLE('',(#541081)); +#541081 = FILL_AREA_STYLE_COLOUR('',#506700); +#541082 = OVER_RIDING_STYLED_ITEM('overriding color',(#541083),#23630, + #540522); +#541083 = PRESENTATION_STYLE_ASSIGNMENT((#541084)); +#541084 = SURFACE_STYLE_USAGE(.BOTH.,#541085); +#541085 = SURFACE_SIDE_STYLE('',(#541086)); +#541086 = SURFACE_STYLE_FILL_AREA(#541087); +#541087 = FILL_AREA_STYLE('',(#541088)); +#541088 = FILL_AREA_STYLE_COLOUR('',#506700); +#541089 = OVER_RIDING_STYLED_ITEM('overriding color',(#541090),#23655, + #540522); +#541090 = PRESENTATION_STYLE_ASSIGNMENT((#541091)); +#541091 = SURFACE_STYLE_USAGE(.BOTH.,#541092); +#541092 = SURFACE_SIDE_STYLE('',(#541093)); +#541093 = SURFACE_STYLE_FILL_AREA(#541094); +#541094 = FILL_AREA_STYLE('',(#541095)); +#541095 = FILL_AREA_STYLE_COLOUR('',#506700); +#541096 = OVER_RIDING_STYLED_ITEM('overriding color',(#541097),#23680, + #540522); +#541097 = PRESENTATION_STYLE_ASSIGNMENT((#541098)); +#541098 = SURFACE_STYLE_USAGE(.BOTH.,#541099); +#541099 = SURFACE_SIDE_STYLE('',(#541100)); +#541100 = SURFACE_STYLE_FILL_AREA(#541101); +#541101 = FILL_AREA_STYLE('',(#541102)); +#541102 = FILL_AREA_STYLE_COLOUR('',#506700); +#541103 = OVER_RIDING_STYLED_ITEM('overriding color',(#541104),#23697, + #540522); +#541104 = PRESENTATION_STYLE_ASSIGNMENT((#541105)); +#541105 = SURFACE_STYLE_USAGE(.BOTH.,#541106); +#541106 = SURFACE_SIDE_STYLE('',(#541107)); +#541107 = SURFACE_STYLE_FILL_AREA(#541108); +#541108 = FILL_AREA_STYLE('',(#541109)); +#541109 = FILL_AREA_STYLE_COLOUR('',#506700); +#541110 = OVER_RIDING_STYLED_ITEM('overriding color',(#541111),#23719, + #540522); +#541111 = PRESENTATION_STYLE_ASSIGNMENT((#541112)); +#541112 = SURFACE_STYLE_USAGE(.BOTH.,#541113); +#541113 = SURFACE_SIDE_STYLE('',(#541114)); +#541114 = SURFACE_STYLE_FILL_AREA(#541115); +#541115 = FILL_AREA_STYLE('',(#541116)); +#541116 = FILL_AREA_STYLE_COLOUR('',#506700); +#541117 = OVER_RIDING_STYLED_ITEM('overriding color',(#541118),#23741, + #540522); +#541118 = PRESENTATION_STYLE_ASSIGNMENT((#541119)); +#541119 = SURFACE_STYLE_USAGE(.BOTH.,#541120); +#541120 = SURFACE_SIDE_STYLE('',(#541121)); +#541121 = SURFACE_STYLE_FILL_AREA(#541122); +#541122 = FILL_AREA_STYLE('',(#541123)); +#541123 = FILL_AREA_STYLE_COLOUR('',#506700); +#541124 = OVER_RIDING_STYLED_ITEM('overriding color',(#541125),#23758, + #540522); +#541125 = PRESENTATION_STYLE_ASSIGNMENT((#541126)); +#541126 = SURFACE_STYLE_USAGE(.BOTH.,#541127); +#541127 = SURFACE_SIDE_STYLE('',(#541128)); +#541128 = SURFACE_STYLE_FILL_AREA(#541129); +#541129 = FILL_AREA_STYLE('',(#541130)); +#541130 = FILL_AREA_STYLE_COLOUR('',#506700); +#541131 = OVER_RIDING_STYLED_ITEM('overriding color',(#541132),#23775, + #540522); +#541132 = PRESENTATION_STYLE_ASSIGNMENT((#541133)); +#541133 = SURFACE_STYLE_USAGE(.BOTH.,#541134); +#541134 = SURFACE_SIDE_STYLE('',(#541135)); +#541135 = SURFACE_STYLE_FILL_AREA(#541136); +#541136 = FILL_AREA_STYLE('',(#541137)); +#541137 = FILL_AREA_STYLE_COLOUR('',#506700); +#541138 = OVER_RIDING_STYLED_ITEM('overriding color',(#541139),#23794, + #540522); +#541139 = PRESENTATION_STYLE_ASSIGNMENT((#541140)); +#541140 = SURFACE_STYLE_USAGE(.BOTH.,#541141); +#541141 = SURFACE_SIDE_STYLE('',(#541142)); +#541142 = SURFACE_STYLE_FILL_AREA(#541143); +#541143 = FILL_AREA_STYLE('',(#541144)); +#541144 = FILL_AREA_STYLE_COLOUR('',#506700); +#541145 = OVER_RIDING_STYLED_ITEM('overriding color',(#541146),#23813, + #540522); +#541146 = PRESENTATION_STYLE_ASSIGNMENT((#541147)); +#541147 = SURFACE_STYLE_USAGE(.BOTH.,#541148); +#541148 = SURFACE_SIDE_STYLE('',(#541149)); +#541149 = SURFACE_STYLE_FILL_AREA(#541150); +#541150 = FILL_AREA_STYLE('',(#541151)); +#541151 = FILL_AREA_STYLE_COLOUR('',#506700); +#541152 = OVER_RIDING_STYLED_ITEM('overriding color',(#541153),#23835, + #540522); +#541153 = PRESENTATION_STYLE_ASSIGNMENT((#541154)); +#541154 = SURFACE_STYLE_USAGE(.BOTH.,#541155); +#541155 = SURFACE_SIDE_STYLE('',(#541156)); +#541156 = SURFACE_STYLE_FILL_AREA(#541157); +#541157 = FILL_AREA_STYLE('',(#541158)); +#541158 = FILL_AREA_STYLE_COLOUR('',#506700); +#541159 = OVER_RIDING_STYLED_ITEM('overriding color',(#541160),#23847, + #540522); +#541160 = PRESENTATION_STYLE_ASSIGNMENT((#541161)); +#541161 = SURFACE_STYLE_USAGE(.BOTH.,#541162); +#541162 = SURFACE_SIDE_STYLE('',(#541163)); +#541163 = SURFACE_STYLE_FILL_AREA(#541164); +#541164 = FILL_AREA_STYLE('',(#541165)); +#541165 = FILL_AREA_STYLE_COLOUR('',#506700); +#541166 = OVER_RIDING_STYLED_ITEM('overriding color',(#541167),#23859, + #540522); +#541167 = PRESENTATION_STYLE_ASSIGNMENT((#541168)); +#541168 = SURFACE_STYLE_USAGE(.BOTH.,#541169); +#541169 = SURFACE_SIDE_STYLE('',(#541170)); +#541170 = SURFACE_STYLE_FILL_AREA(#541171); +#541171 = FILL_AREA_STYLE('',(#541172)); +#541172 = FILL_AREA_STYLE_COLOUR('',#506700); +#541173 = OVER_RIDING_STYLED_ITEM('overriding color',(#541174),#23871, + #540522); +#541174 = PRESENTATION_STYLE_ASSIGNMENT((#541175)); +#541175 = SURFACE_STYLE_USAGE(.BOTH.,#541176); +#541176 = SURFACE_SIDE_STYLE('',(#541177)); +#541177 = SURFACE_STYLE_FILL_AREA(#541178); +#541178 = FILL_AREA_STYLE('',(#541179)); +#541179 = FILL_AREA_STYLE_COLOUR('',#506700); +#541180 = OVER_RIDING_STYLED_ITEM('overriding color',(#541181),#23883, + #540522); +#541181 = PRESENTATION_STYLE_ASSIGNMENT((#541182)); +#541182 = SURFACE_STYLE_USAGE(.BOTH.,#541183); +#541183 = SURFACE_SIDE_STYLE('',(#541184)); +#541184 = SURFACE_STYLE_FILL_AREA(#541185); +#541185 = FILL_AREA_STYLE('',(#541186)); +#541186 = FILL_AREA_STYLE_COLOUR('',#506700); +#541187 = OVER_RIDING_STYLED_ITEM('overriding color',(#541188),#23895, + #540522); +#541188 = PRESENTATION_STYLE_ASSIGNMENT((#541189)); +#541189 = SURFACE_STYLE_USAGE(.BOTH.,#541190); +#541190 = SURFACE_SIDE_STYLE('',(#541191)); +#541191 = SURFACE_STYLE_FILL_AREA(#541192); +#541192 = FILL_AREA_STYLE('',(#541193)); +#541193 = FILL_AREA_STYLE_COLOUR('',#506700); +#541194 = OVER_RIDING_STYLED_ITEM('overriding color',(#541195),#23909, + #540522); +#541195 = PRESENTATION_STYLE_ASSIGNMENT((#541196)); +#541196 = SURFACE_STYLE_USAGE(.BOTH.,#541197); +#541197 = SURFACE_SIDE_STYLE('',(#541198)); +#541198 = SURFACE_STYLE_FILL_AREA(#541199); +#541199 = FILL_AREA_STYLE('',(#541200)); +#541200 = FILL_AREA_STYLE_COLOUR('',#506700); +#541201 = OVER_RIDING_STYLED_ITEM('overriding color',(#541202),#23921, + #540522); +#541202 = PRESENTATION_STYLE_ASSIGNMENT((#541203)); +#541203 = SURFACE_STYLE_USAGE(.BOTH.,#541204); +#541204 = SURFACE_SIDE_STYLE('',(#541205)); +#541205 = SURFACE_STYLE_FILL_AREA(#541206); +#541206 = FILL_AREA_STYLE('',(#541207)); +#541207 = FILL_AREA_STYLE_COLOUR('',#506700); +#541208 = OVER_RIDING_STYLED_ITEM('overriding color',(#541209),#23938, + #540522); +#541209 = PRESENTATION_STYLE_ASSIGNMENT((#541210)); +#541210 = SURFACE_STYLE_USAGE(.BOTH.,#541211); +#541211 = SURFACE_SIDE_STYLE('',(#541212)); +#541212 = SURFACE_STYLE_FILL_AREA(#541213); +#541213 = FILL_AREA_STYLE('',(#541214)); +#541214 = FILL_AREA_STYLE_COLOUR('',#506700); +#541215 = OVER_RIDING_STYLED_ITEM('overriding color',(#541216),#23950, + #540522); +#541216 = PRESENTATION_STYLE_ASSIGNMENT((#541217)); +#541217 = SURFACE_STYLE_USAGE(.BOTH.,#541218); +#541218 = SURFACE_SIDE_STYLE('',(#541219)); +#541219 = SURFACE_STYLE_FILL_AREA(#541220); +#541220 = FILL_AREA_STYLE('',(#541221)); +#541221 = FILL_AREA_STYLE_COLOUR('',#506700); +#541222 = OVER_RIDING_STYLED_ITEM('overriding color',(#541223),#23964, + #540522); +#541223 = PRESENTATION_STYLE_ASSIGNMENT((#541224)); +#541224 = SURFACE_STYLE_USAGE(.BOTH.,#541225); +#541225 = SURFACE_SIDE_STYLE('',(#541226)); +#541226 = SURFACE_STYLE_FILL_AREA(#541227); +#541227 = FILL_AREA_STYLE('',(#541228)); +#541228 = FILL_AREA_STYLE_COLOUR('',#506700); +#541229 = OVER_RIDING_STYLED_ITEM('overriding color',(#541230),#23976, + #540522); +#541230 = PRESENTATION_STYLE_ASSIGNMENT((#541231)); +#541231 = SURFACE_STYLE_USAGE(.BOTH.,#541232); +#541232 = SURFACE_SIDE_STYLE('',(#541233)); +#541233 = SURFACE_STYLE_FILL_AREA(#541234); +#541234 = FILL_AREA_STYLE('',(#541235)); +#541235 = FILL_AREA_STYLE_COLOUR('',#506700); +#541236 = OVER_RIDING_STYLED_ITEM('overriding color',(#541237),#23988, + #540522); +#541237 = PRESENTATION_STYLE_ASSIGNMENT((#541238)); +#541238 = SURFACE_STYLE_USAGE(.BOTH.,#541239); +#541239 = SURFACE_SIDE_STYLE('',(#541240)); +#541240 = SURFACE_STYLE_FILL_AREA(#541241); +#541241 = FILL_AREA_STYLE('',(#541242)); +#541242 = FILL_AREA_STYLE_COLOUR('',#506700); +#541243 = OVER_RIDING_STYLED_ITEM('overriding color',(#541244),#24019, + #540522); +#541244 = PRESENTATION_STYLE_ASSIGNMENT((#541245)); +#541245 = SURFACE_STYLE_USAGE(.BOTH.,#541246); +#541246 = SURFACE_SIDE_STYLE('',(#541247)); +#541247 = SURFACE_STYLE_FILL_AREA(#541248); +#541248 = FILL_AREA_STYLE('',(#541249)); +#541249 = FILL_AREA_STYLE_COLOUR('',#506700); +#541250 = OVER_RIDING_STYLED_ITEM('overriding color',(#541251),#24050, + #540522); +#541251 = PRESENTATION_STYLE_ASSIGNMENT((#541252)); +#541252 = SURFACE_STYLE_USAGE(.BOTH.,#541253); +#541253 = SURFACE_SIDE_STYLE('',(#541254)); +#541254 = SURFACE_STYLE_FILL_AREA(#541255); +#541255 = FILL_AREA_STYLE('',(#541256)); +#541256 = FILL_AREA_STYLE_COLOUR('',#506700); +#541257 = OVER_RIDING_STYLED_ITEM('overriding color',(#541258),#24092, + #540522); +#541258 = PRESENTATION_STYLE_ASSIGNMENT((#541259)); +#541259 = SURFACE_STYLE_USAGE(.BOTH.,#541260); +#541260 = SURFACE_SIDE_STYLE('',(#541261)); +#541261 = SURFACE_STYLE_FILL_AREA(#541262); +#541262 = FILL_AREA_STYLE('',(#541263)); +#541263 = FILL_AREA_STYLE_COLOUR('',#506700); +#541264 = OVER_RIDING_STYLED_ITEM('overriding color',(#541265),#24159, + #540522); +#541265 = PRESENTATION_STYLE_ASSIGNMENT((#541266)); +#541266 = SURFACE_STYLE_USAGE(.BOTH.,#541267); +#541267 = SURFACE_SIDE_STYLE('',(#541268)); +#541268 = SURFACE_STYLE_FILL_AREA(#541269); +#541269 = FILL_AREA_STYLE('',(#541270)); +#541270 = FILL_AREA_STYLE_COLOUR('',#506700); +#541271 = OVER_RIDING_STYLED_ITEM('overriding color',(#541272),#24201, + #540522); +#541272 = PRESENTATION_STYLE_ASSIGNMENT((#541273)); +#541273 = SURFACE_STYLE_USAGE(.BOTH.,#541274); +#541274 = SURFACE_SIDE_STYLE('',(#541275)); +#541275 = SURFACE_STYLE_FILL_AREA(#541276); +#541276 = FILL_AREA_STYLE('',(#541277)); +#541277 = FILL_AREA_STYLE_COLOUR('',#506700); +#541278 = OVER_RIDING_STYLED_ITEM('overriding color',(#541279),#24232, + #540522); +#541279 = PRESENTATION_STYLE_ASSIGNMENT((#541280)); +#541280 = SURFACE_STYLE_USAGE(.BOTH.,#541281); +#541281 = SURFACE_SIDE_STYLE('',(#541282)); +#541282 = SURFACE_STYLE_FILL_AREA(#541283); +#541283 = FILL_AREA_STYLE('',(#541284)); +#541284 = FILL_AREA_STYLE_COLOUR('',#506700); +#541285 = OVER_RIDING_STYLED_ITEM('overriding color',(#541286),#24263, + #540522); +#541286 = PRESENTATION_STYLE_ASSIGNMENT((#541287)); +#541287 = SURFACE_STYLE_USAGE(.BOTH.,#541288); +#541288 = SURFACE_SIDE_STYLE('',(#541289)); +#541289 = SURFACE_STYLE_FILL_AREA(#541290); +#541290 = FILL_AREA_STYLE('',(#541291)); +#541291 = FILL_AREA_STYLE_COLOUR('',#506700); +#541292 = OVER_RIDING_STYLED_ITEM('overriding color',(#541293),#24294, + #540522); +#541293 = PRESENTATION_STYLE_ASSIGNMENT((#541294)); +#541294 = SURFACE_STYLE_USAGE(.BOTH.,#541295); +#541295 = SURFACE_SIDE_STYLE('',(#541296)); +#541296 = SURFACE_STYLE_FILL_AREA(#541297); +#541297 = FILL_AREA_STYLE('',(#541298)); +#541298 = FILL_AREA_STYLE_COLOUR('',#506700); +#541299 = OVER_RIDING_STYLED_ITEM('overriding color',(#541300),#24325, + #540522); +#541300 = PRESENTATION_STYLE_ASSIGNMENT((#541301)); +#541301 = SURFACE_STYLE_USAGE(.BOTH.,#541302); +#541302 = SURFACE_SIDE_STYLE('',(#541303)); +#541303 = SURFACE_STYLE_FILL_AREA(#541304); +#541304 = FILL_AREA_STYLE('',(#541305)); +#541305 = FILL_AREA_STYLE_COLOUR('',#506700); +#541306 = OVER_RIDING_STYLED_ITEM('overriding color',(#541307),#24356, + #540522); +#541307 = PRESENTATION_STYLE_ASSIGNMENT((#541308)); +#541308 = SURFACE_STYLE_USAGE(.BOTH.,#541309); +#541309 = SURFACE_SIDE_STYLE('',(#541310)); +#541310 = SURFACE_STYLE_FILL_AREA(#541311); +#541311 = FILL_AREA_STYLE('',(#541312)); +#541312 = FILL_AREA_STYLE_COLOUR('',#506700); +#541313 = OVER_RIDING_STYLED_ITEM('overriding color',(#541314),#24461, + #540522); +#541314 = PRESENTATION_STYLE_ASSIGNMENT((#541315)); +#541315 = SURFACE_STYLE_USAGE(.BOTH.,#541316); +#541316 = SURFACE_SIDE_STYLE('',(#541317)); +#541317 = SURFACE_STYLE_FILL_AREA(#541318); +#541318 = FILL_AREA_STYLE('',(#541319)); +#541319 = FILL_AREA_STYLE_COLOUR('',#506700); +#541320 = OVER_RIDING_STYLED_ITEM('overriding color',(#541321),#24501, + #540522); +#541321 = PRESENTATION_STYLE_ASSIGNMENT((#541322)); +#541322 = SURFACE_STYLE_USAGE(.BOTH.,#541323); +#541323 = SURFACE_SIDE_STYLE('',(#541324)); +#541324 = SURFACE_STYLE_FILL_AREA(#541325); +#541325 = FILL_AREA_STYLE('',(#541326)); +#541326 = FILL_AREA_STYLE_COLOUR('',#506700); +#541327 = OVER_RIDING_STYLED_ITEM('overriding color',(#541328),#24550, + #540522); +#541328 = PRESENTATION_STYLE_ASSIGNMENT((#541329)); +#541329 = SURFACE_STYLE_USAGE(.BOTH.,#541330); +#541330 = SURFACE_SIDE_STYLE('',(#541331)); +#541331 = SURFACE_STYLE_FILL_AREA(#541332); +#541332 = FILL_AREA_STYLE('',(#541333)); +#541333 = FILL_AREA_STYLE_COLOUR('',#506700); +#541334 = OVER_RIDING_STYLED_ITEM('overriding color',(#541335),#24581, + #540522); +#541335 = PRESENTATION_STYLE_ASSIGNMENT((#541336)); +#541336 = SURFACE_STYLE_USAGE(.BOTH.,#541337); +#541337 = SURFACE_SIDE_STYLE('',(#541338)); +#541338 = SURFACE_STYLE_FILL_AREA(#541339); +#541339 = FILL_AREA_STYLE('',(#541340)); +#541340 = FILL_AREA_STYLE_COLOUR('',#506700); +#541341 = OVER_RIDING_STYLED_ITEM('overriding color',(#541342),#24621, + #540522); +#541342 = PRESENTATION_STYLE_ASSIGNMENT((#541343)); +#541343 = SURFACE_STYLE_USAGE(.BOTH.,#541344); +#541344 = SURFACE_SIDE_STYLE('',(#541345)); +#541345 = SURFACE_STYLE_FILL_AREA(#541346); +#541346 = FILL_AREA_STYLE('',(#541347)); +#541347 = FILL_AREA_STYLE_COLOUR('',#506700); +#541348 = OVER_RIDING_STYLED_ITEM('overriding color',(#541349),#24654, + #540522); +#541349 = PRESENTATION_STYLE_ASSIGNMENT((#541350)); +#541350 = SURFACE_STYLE_USAGE(.BOTH.,#541351); +#541351 = SURFACE_SIDE_STYLE('',(#541352)); +#541352 = SURFACE_STYLE_FILL_AREA(#541353); +#541353 = FILL_AREA_STYLE('',(#541354)); +#541354 = FILL_AREA_STYLE_COLOUR('',#506700); +#541355 = OVER_RIDING_STYLED_ITEM('overriding color',(#541356),#24679, + #540522); +#541356 = PRESENTATION_STYLE_ASSIGNMENT((#541357)); +#541357 = SURFACE_STYLE_USAGE(.BOTH.,#541358); +#541358 = SURFACE_SIDE_STYLE('',(#541359)); +#541359 = SURFACE_STYLE_FILL_AREA(#541360); +#541360 = FILL_AREA_STYLE('',(#541361)); +#541361 = FILL_AREA_STYLE_COLOUR('',#506700); +#541362 = OVER_RIDING_STYLED_ITEM('overriding color',(#541363),#24704, + #540522); +#541363 = PRESENTATION_STYLE_ASSIGNMENT((#541364)); +#541364 = SURFACE_STYLE_USAGE(.BOTH.,#541365); +#541365 = SURFACE_SIDE_STYLE('',(#541366)); +#541366 = SURFACE_STYLE_FILL_AREA(#541367); +#541367 = FILL_AREA_STYLE('',(#541368)); +#541368 = FILL_AREA_STYLE_COLOUR('',#506700); +#541369 = OVER_RIDING_STYLED_ITEM('overriding color',(#541370),#24721, + #540522); +#541370 = PRESENTATION_STYLE_ASSIGNMENT((#541371)); +#541371 = SURFACE_STYLE_USAGE(.BOTH.,#541372); +#541372 = SURFACE_SIDE_STYLE('',(#541373)); +#541373 = SURFACE_STYLE_FILL_AREA(#541374); +#541374 = FILL_AREA_STYLE('',(#541375)); +#541375 = FILL_AREA_STYLE_COLOUR('',#506700); +#541376 = OVER_RIDING_STYLED_ITEM('overriding color',(#541377),#24743, + #540522); +#541377 = PRESENTATION_STYLE_ASSIGNMENT((#541378)); +#541378 = SURFACE_STYLE_USAGE(.BOTH.,#541379); +#541379 = SURFACE_SIDE_STYLE('',(#541380)); +#541380 = SURFACE_STYLE_FILL_AREA(#541381); +#541381 = FILL_AREA_STYLE('',(#541382)); +#541382 = FILL_AREA_STYLE_COLOUR('',#506700); +#541383 = OVER_RIDING_STYLED_ITEM('overriding color',(#541384),#24765, + #540522); +#541384 = PRESENTATION_STYLE_ASSIGNMENT((#541385)); +#541385 = SURFACE_STYLE_USAGE(.BOTH.,#541386); +#541386 = SURFACE_SIDE_STYLE('',(#541387)); +#541387 = SURFACE_STYLE_FILL_AREA(#541388); +#541388 = FILL_AREA_STYLE('',(#541389)); +#541389 = FILL_AREA_STYLE_COLOUR('',#506700); +#541390 = OVER_RIDING_STYLED_ITEM('overriding color',(#541391),#24782, + #540522); +#541391 = PRESENTATION_STYLE_ASSIGNMENT((#541392)); +#541392 = SURFACE_STYLE_USAGE(.BOTH.,#541393); +#541393 = SURFACE_SIDE_STYLE('',(#541394)); +#541394 = SURFACE_STYLE_FILL_AREA(#541395); +#541395 = FILL_AREA_STYLE('',(#541396)); +#541396 = FILL_AREA_STYLE_COLOUR('',#506700); +#541397 = OVER_RIDING_STYLED_ITEM('overriding color',(#541398),#24799, + #540522); +#541398 = PRESENTATION_STYLE_ASSIGNMENT((#541399)); +#541399 = SURFACE_STYLE_USAGE(.BOTH.,#541400); +#541400 = SURFACE_SIDE_STYLE('',(#541401)); +#541401 = SURFACE_STYLE_FILL_AREA(#541402); +#541402 = FILL_AREA_STYLE('',(#541403)); +#541403 = FILL_AREA_STYLE_COLOUR('',#506700); +#541404 = OVER_RIDING_STYLED_ITEM('overriding color',(#541405),#24818, + #540522); +#541405 = PRESENTATION_STYLE_ASSIGNMENT((#541406)); +#541406 = SURFACE_STYLE_USAGE(.BOTH.,#541407); +#541407 = SURFACE_SIDE_STYLE('',(#541408)); +#541408 = SURFACE_STYLE_FILL_AREA(#541409); +#541409 = FILL_AREA_STYLE('',(#541410)); +#541410 = FILL_AREA_STYLE_COLOUR('',#506700); +#541411 = OVER_RIDING_STYLED_ITEM('overriding color',(#541412),#24837, + #540522); +#541412 = PRESENTATION_STYLE_ASSIGNMENT((#541413)); +#541413 = SURFACE_STYLE_USAGE(.BOTH.,#541414); +#541414 = SURFACE_SIDE_STYLE('',(#541415)); +#541415 = SURFACE_STYLE_FILL_AREA(#541416); +#541416 = FILL_AREA_STYLE('',(#541417)); +#541417 = FILL_AREA_STYLE_COLOUR('',#506700); +#541418 = OVER_RIDING_STYLED_ITEM('overriding color',(#541419),#24859, + #540522); +#541419 = PRESENTATION_STYLE_ASSIGNMENT((#541420)); +#541420 = SURFACE_STYLE_USAGE(.BOTH.,#541421); +#541421 = SURFACE_SIDE_STYLE('',(#541422)); +#541422 = SURFACE_STYLE_FILL_AREA(#541423); +#541423 = FILL_AREA_STYLE('',(#541424)); +#541424 = FILL_AREA_STYLE_COLOUR('',#506700); +#541425 = OVER_RIDING_STYLED_ITEM('overriding color',(#541426),#24899, + #540522); +#541426 = PRESENTATION_STYLE_ASSIGNMENT((#541427)); +#541427 = SURFACE_STYLE_USAGE(.BOTH.,#541428); +#541428 = SURFACE_SIDE_STYLE('',(#541429)); +#541429 = SURFACE_STYLE_FILL_AREA(#541430); +#541430 = FILL_AREA_STYLE('',(#541431)); +#541431 = FILL_AREA_STYLE_COLOUR('',#506700); +#541432 = OVER_RIDING_STYLED_ITEM('overriding color',(#541433),#24948, + #540522); +#541433 = PRESENTATION_STYLE_ASSIGNMENT((#541434)); +#541434 = SURFACE_STYLE_USAGE(.BOTH.,#541435); +#541435 = SURFACE_SIDE_STYLE('',(#541436)); +#541436 = SURFACE_STYLE_FILL_AREA(#541437); +#541437 = FILL_AREA_STYLE('',(#541438)); +#541438 = FILL_AREA_STYLE_COLOUR('',#506700); +#541439 = OVER_RIDING_STYLED_ITEM('overriding color',(#541440),#24979, + #540522); +#541440 = PRESENTATION_STYLE_ASSIGNMENT((#541441)); +#541441 = SURFACE_STYLE_USAGE(.BOTH.,#541442); +#541442 = SURFACE_SIDE_STYLE('',(#541443)); +#541443 = SURFACE_STYLE_FILL_AREA(#541444); +#541444 = FILL_AREA_STYLE('',(#541445)); +#541445 = FILL_AREA_STYLE_COLOUR('',#506700); +#541446 = OVER_RIDING_STYLED_ITEM('overriding color',(#541447),#25019, + #540522); +#541447 = PRESENTATION_STYLE_ASSIGNMENT((#541448)); +#541448 = SURFACE_STYLE_USAGE(.BOTH.,#541449); +#541449 = SURFACE_SIDE_STYLE('',(#541450)); +#541450 = SURFACE_STYLE_FILL_AREA(#541451); +#541451 = FILL_AREA_STYLE('',(#541452)); +#541452 = FILL_AREA_STYLE_COLOUR('',#506700); +#541453 = OVER_RIDING_STYLED_ITEM('overriding color',(#541454),#25052, + #540522); +#541454 = PRESENTATION_STYLE_ASSIGNMENT((#541455)); +#541455 = SURFACE_STYLE_USAGE(.BOTH.,#541456); +#541456 = SURFACE_SIDE_STYLE('',(#541457)); +#541457 = SURFACE_STYLE_FILL_AREA(#541458); +#541458 = FILL_AREA_STYLE('',(#541459)); +#541459 = FILL_AREA_STYLE_COLOUR('',#506700); +#541460 = OVER_RIDING_STYLED_ITEM('overriding color',(#541461),#25077, + #540522); +#541461 = PRESENTATION_STYLE_ASSIGNMENT((#541462)); +#541462 = SURFACE_STYLE_USAGE(.BOTH.,#541463); +#541463 = SURFACE_SIDE_STYLE('',(#541464)); +#541464 = SURFACE_STYLE_FILL_AREA(#541465); +#541465 = FILL_AREA_STYLE('',(#541466)); +#541466 = FILL_AREA_STYLE_COLOUR('',#506700); +#541467 = OVER_RIDING_STYLED_ITEM('overriding color',(#541468),#25102, + #540522); +#541468 = PRESENTATION_STYLE_ASSIGNMENT((#541469)); +#541469 = SURFACE_STYLE_USAGE(.BOTH.,#541470); +#541470 = SURFACE_SIDE_STYLE('',(#541471)); +#541471 = SURFACE_STYLE_FILL_AREA(#541472); +#541472 = FILL_AREA_STYLE('',(#541473)); +#541473 = FILL_AREA_STYLE_COLOUR('',#506700); +#541474 = OVER_RIDING_STYLED_ITEM('overriding color',(#541475),#25119, + #540522); +#541475 = PRESENTATION_STYLE_ASSIGNMENT((#541476)); +#541476 = SURFACE_STYLE_USAGE(.BOTH.,#541477); +#541477 = SURFACE_SIDE_STYLE('',(#541478)); +#541478 = SURFACE_STYLE_FILL_AREA(#541479); +#541479 = FILL_AREA_STYLE('',(#541480)); +#541480 = FILL_AREA_STYLE_COLOUR('',#506700); +#541481 = OVER_RIDING_STYLED_ITEM('overriding color',(#541482),#25141, + #540522); +#541482 = PRESENTATION_STYLE_ASSIGNMENT((#541483)); +#541483 = SURFACE_STYLE_USAGE(.BOTH.,#541484); +#541484 = SURFACE_SIDE_STYLE('',(#541485)); +#541485 = SURFACE_STYLE_FILL_AREA(#541486); +#541486 = FILL_AREA_STYLE('',(#541487)); +#541487 = FILL_AREA_STYLE_COLOUR('',#506700); +#541488 = OVER_RIDING_STYLED_ITEM('overriding color',(#541489),#25163, + #540522); +#541489 = PRESENTATION_STYLE_ASSIGNMENT((#541490)); +#541490 = SURFACE_STYLE_USAGE(.BOTH.,#541491); +#541491 = SURFACE_SIDE_STYLE('',(#541492)); +#541492 = SURFACE_STYLE_FILL_AREA(#541493); +#541493 = FILL_AREA_STYLE('',(#541494)); +#541494 = FILL_AREA_STYLE_COLOUR('',#506700); +#541495 = OVER_RIDING_STYLED_ITEM('overriding color',(#541496),#25180, + #540522); +#541496 = PRESENTATION_STYLE_ASSIGNMENT((#541497)); +#541497 = SURFACE_STYLE_USAGE(.BOTH.,#541498); +#541498 = SURFACE_SIDE_STYLE('',(#541499)); +#541499 = SURFACE_STYLE_FILL_AREA(#541500); +#541500 = FILL_AREA_STYLE('',(#541501)); +#541501 = FILL_AREA_STYLE_COLOUR('',#506700); +#541502 = OVER_RIDING_STYLED_ITEM('overriding color',(#541503),#25197, + #540522); +#541503 = PRESENTATION_STYLE_ASSIGNMENT((#541504)); +#541504 = SURFACE_STYLE_USAGE(.BOTH.,#541505); +#541505 = SURFACE_SIDE_STYLE('',(#541506)); +#541506 = SURFACE_STYLE_FILL_AREA(#541507); +#541507 = FILL_AREA_STYLE('',(#541508)); +#541508 = FILL_AREA_STYLE_COLOUR('',#506700); +#541509 = OVER_RIDING_STYLED_ITEM('overriding color',(#541510),#25216, + #540522); +#541510 = PRESENTATION_STYLE_ASSIGNMENT((#541511)); +#541511 = SURFACE_STYLE_USAGE(.BOTH.,#541512); +#541512 = SURFACE_SIDE_STYLE('',(#541513)); +#541513 = SURFACE_STYLE_FILL_AREA(#541514); +#541514 = FILL_AREA_STYLE('',(#541515)); +#541515 = FILL_AREA_STYLE_COLOUR('',#506700); +#541516 = OVER_RIDING_STYLED_ITEM('overriding color',(#541517),#25235, + #540522); +#541517 = PRESENTATION_STYLE_ASSIGNMENT((#541518)); +#541518 = SURFACE_STYLE_USAGE(.BOTH.,#541519); +#541519 = SURFACE_SIDE_STYLE('',(#541520)); +#541520 = SURFACE_STYLE_FILL_AREA(#541521); +#541521 = FILL_AREA_STYLE('',(#541522)); +#541522 = FILL_AREA_STYLE_COLOUR('',#506700); +#541523 = OVER_RIDING_STYLED_ITEM('overriding color',(#541524),#25257, + #540522); +#541524 = PRESENTATION_STYLE_ASSIGNMENT((#541525)); +#541525 = SURFACE_STYLE_USAGE(.BOTH.,#541526); +#541526 = SURFACE_SIDE_STYLE('',(#541527)); +#541527 = SURFACE_STYLE_FILL_AREA(#541528); +#541528 = FILL_AREA_STYLE('',(#541529)); +#541529 = FILL_AREA_STYLE_COLOUR('',#506700); +#541530 = OVER_RIDING_STYLED_ITEM('overriding color',(#541531),#25269, + #540522); +#541531 = PRESENTATION_STYLE_ASSIGNMENT((#541532)); +#541532 = SURFACE_STYLE_USAGE(.BOTH.,#541533); +#541533 = SURFACE_SIDE_STYLE('',(#541534)); +#541534 = SURFACE_STYLE_FILL_AREA(#541535); +#541535 = FILL_AREA_STYLE('',(#541536)); +#541536 = FILL_AREA_STYLE_COLOUR('',#506700); +#541537 = OVER_RIDING_STYLED_ITEM('overriding color',(#541538),#25281, + #540522); +#541538 = PRESENTATION_STYLE_ASSIGNMENT((#541539)); +#541539 = SURFACE_STYLE_USAGE(.BOTH.,#541540); +#541540 = SURFACE_SIDE_STYLE('',(#541541)); +#541541 = SURFACE_STYLE_FILL_AREA(#541542); +#541542 = FILL_AREA_STYLE('',(#541543)); +#541543 = FILL_AREA_STYLE_COLOUR('',#506700); +#541544 = OVER_RIDING_STYLED_ITEM('overriding color',(#541545),#25293, + #540522); +#541545 = PRESENTATION_STYLE_ASSIGNMENT((#541546)); +#541546 = SURFACE_STYLE_USAGE(.BOTH.,#541547); +#541547 = SURFACE_SIDE_STYLE('',(#541548)); +#541548 = SURFACE_STYLE_FILL_AREA(#541549); +#541549 = FILL_AREA_STYLE('',(#541550)); +#541550 = FILL_AREA_STYLE_COLOUR('',#506700); +#541551 = OVER_RIDING_STYLED_ITEM('overriding color',(#541552),#25305, + #540522); +#541552 = PRESENTATION_STYLE_ASSIGNMENT((#541553)); +#541553 = SURFACE_STYLE_USAGE(.BOTH.,#541554); +#541554 = SURFACE_SIDE_STYLE('',(#541555)); +#541555 = SURFACE_STYLE_FILL_AREA(#541556); +#541556 = FILL_AREA_STYLE('',(#541557)); +#541557 = FILL_AREA_STYLE_COLOUR('',#506700); +#541558 = OVER_RIDING_STYLED_ITEM('overriding color',(#541559),#25317, + #540522); +#541559 = PRESENTATION_STYLE_ASSIGNMENT((#541560)); +#541560 = SURFACE_STYLE_USAGE(.BOTH.,#541561); +#541561 = SURFACE_SIDE_STYLE('',(#541562)); +#541562 = SURFACE_STYLE_FILL_AREA(#541563); +#541563 = FILL_AREA_STYLE('',(#541564)); +#541564 = FILL_AREA_STYLE_COLOUR('',#506700); +#541565 = OVER_RIDING_STYLED_ITEM('overriding color',(#541566),#25331, + #540522); +#541566 = PRESENTATION_STYLE_ASSIGNMENT((#541567)); +#541567 = SURFACE_STYLE_USAGE(.BOTH.,#541568); +#541568 = SURFACE_SIDE_STYLE('',(#541569)); +#541569 = SURFACE_STYLE_FILL_AREA(#541570); +#541570 = FILL_AREA_STYLE('',(#541571)); +#541571 = FILL_AREA_STYLE_COLOUR('',#506700); +#541572 = OVER_RIDING_STYLED_ITEM('overriding color',(#541573),#25343, + #540522); +#541573 = PRESENTATION_STYLE_ASSIGNMENT((#541574)); +#541574 = SURFACE_STYLE_USAGE(.BOTH.,#541575); +#541575 = SURFACE_SIDE_STYLE('',(#541576)); +#541576 = SURFACE_STYLE_FILL_AREA(#541577); +#541577 = FILL_AREA_STYLE('',(#541578)); +#541578 = FILL_AREA_STYLE_COLOUR('',#506700); +#541579 = OVER_RIDING_STYLED_ITEM('overriding color',(#541580),#25360, + #540522); +#541580 = PRESENTATION_STYLE_ASSIGNMENT((#541581)); +#541581 = SURFACE_STYLE_USAGE(.BOTH.,#541582); +#541582 = SURFACE_SIDE_STYLE('',(#541583)); +#541583 = SURFACE_STYLE_FILL_AREA(#541584); +#541584 = FILL_AREA_STYLE('',(#541585)); +#541585 = FILL_AREA_STYLE_COLOUR('',#506700); +#541586 = OVER_RIDING_STYLED_ITEM('overriding color',(#541587),#25372, + #540522); +#541587 = PRESENTATION_STYLE_ASSIGNMENT((#541588)); +#541588 = SURFACE_STYLE_USAGE(.BOTH.,#541589); +#541589 = SURFACE_SIDE_STYLE('',(#541590)); +#541590 = SURFACE_STYLE_FILL_AREA(#541591); +#541591 = FILL_AREA_STYLE('',(#541592)); +#541592 = FILL_AREA_STYLE_COLOUR('',#506700); +#541593 = OVER_RIDING_STYLED_ITEM('overriding color',(#541594),#25386, + #540522); +#541594 = PRESENTATION_STYLE_ASSIGNMENT((#541595)); +#541595 = SURFACE_STYLE_USAGE(.BOTH.,#541596); +#541596 = SURFACE_SIDE_STYLE('',(#541597)); +#541597 = SURFACE_STYLE_FILL_AREA(#541598); +#541598 = FILL_AREA_STYLE('',(#541599)); +#541599 = FILL_AREA_STYLE_COLOUR('',#506700); +#541600 = OVER_RIDING_STYLED_ITEM('overriding color',(#541601),#25398, + #540522); +#541601 = PRESENTATION_STYLE_ASSIGNMENT((#541602)); +#541602 = SURFACE_STYLE_USAGE(.BOTH.,#541603); +#541603 = SURFACE_SIDE_STYLE('',(#541604)); +#541604 = SURFACE_STYLE_FILL_AREA(#541605); +#541605 = FILL_AREA_STYLE('',(#541606)); +#541606 = FILL_AREA_STYLE_COLOUR('',#506700); +#541607 = OVER_RIDING_STYLED_ITEM('overriding color',(#541608),#25410, + #540522); +#541608 = PRESENTATION_STYLE_ASSIGNMENT((#541609)); +#541609 = SURFACE_STYLE_USAGE(.BOTH.,#541610); +#541610 = SURFACE_SIDE_STYLE('',(#541611)); +#541611 = SURFACE_STYLE_FILL_AREA(#541612); +#541612 = FILL_AREA_STYLE('',(#541613)); +#541613 = FILL_AREA_STYLE_COLOUR('',#506700); +#541614 = OVER_RIDING_STYLED_ITEM('overriding color',(#541615),#25421, + #540522); +#541615 = PRESENTATION_STYLE_ASSIGNMENT((#541616)); +#541616 = SURFACE_STYLE_USAGE(.BOTH.,#541617); +#541617 = SURFACE_SIDE_STYLE('',(#541618)); +#541618 = SURFACE_STYLE_FILL_AREA(#541619); +#541619 = FILL_AREA_STYLE('',(#541620)); +#541620 = FILL_AREA_STYLE_COLOUR('',#506700); +#541621 = OVER_RIDING_STYLED_ITEM('overriding color',(#541622),#25432, + #540522); +#541622 = PRESENTATION_STYLE_ASSIGNMENT((#541623)); +#541623 = SURFACE_STYLE_USAGE(.BOTH.,#541624); +#541624 = SURFACE_SIDE_STYLE('',(#541625)); +#541625 = SURFACE_STYLE_FILL_AREA(#541626); +#541626 = FILL_AREA_STYLE('',(#541627)); +#541627 = FILL_AREA_STYLE_COLOUR('',#506700); +#541628 = OVER_RIDING_STYLED_ITEM('overriding color',(#541629),#25443, + #540522); +#541629 = PRESENTATION_STYLE_ASSIGNMENT((#541630)); +#541630 = SURFACE_STYLE_USAGE(.BOTH.,#541631); +#541631 = SURFACE_SIDE_STYLE('',(#541632)); +#541632 = SURFACE_STYLE_FILL_AREA(#541633); +#541633 = FILL_AREA_STYLE('',(#541634)); +#541634 = FILL_AREA_STYLE_COLOUR('',#506700); +#541635 = OVER_RIDING_STYLED_ITEM('overriding color',(#541636),#25454, + #540522); +#541636 = PRESENTATION_STYLE_ASSIGNMENT((#541637)); +#541637 = SURFACE_STYLE_USAGE(.BOTH.,#541638); +#541638 = SURFACE_SIDE_STYLE('',(#541639)); +#541639 = SURFACE_STYLE_FILL_AREA(#541640); +#541640 = FILL_AREA_STYLE('',(#541641)); +#541641 = FILL_AREA_STYLE_COLOUR('',#506700); +#541642 = OVER_RIDING_STYLED_ITEM('overriding color',(#541643),#25466, + #540522); +#541643 = PRESENTATION_STYLE_ASSIGNMENT((#541644)); +#541644 = SURFACE_STYLE_USAGE(.BOTH.,#541645); +#541645 = SURFACE_SIDE_STYLE('',(#541646)); +#541646 = SURFACE_STYLE_FILL_AREA(#541647); +#541647 = FILL_AREA_STYLE('',(#541648)); +#541648 = FILL_AREA_STYLE_COLOUR('',#506700); +#541649 = OVER_RIDING_STYLED_ITEM('overriding color',(#541650),#25478, + #540522); +#541650 = PRESENTATION_STYLE_ASSIGNMENT((#541651)); +#541651 = SURFACE_STYLE_USAGE(.BOTH.,#541652); +#541652 = SURFACE_SIDE_STYLE('',(#541653)); +#541653 = SURFACE_STYLE_FILL_AREA(#541654); +#541654 = FILL_AREA_STYLE('',(#541655)); +#541655 = FILL_AREA_STYLE_COLOUR('',#510798); +#541656 = OVER_RIDING_STYLED_ITEM('overriding color',(#541657),#25509, + #540522); +#541657 = PRESENTATION_STYLE_ASSIGNMENT((#541658)); +#541658 = SURFACE_STYLE_USAGE(.BOTH.,#541659); +#541659 = SURFACE_SIDE_STYLE('',(#541660)); +#541660 = SURFACE_STYLE_FILL_AREA(#541661); +#541661 = FILL_AREA_STYLE('',(#541662)); +#541662 = FILL_AREA_STYLE_COLOUR('',#510798); +#541663 = OVER_RIDING_STYLED_ITEM('overriding color',(#541664),#25533, + #540522); +#541664 = PRESENTATION_STYLE_ASSIGNMENT((#541665)); +#541665 = SURFACE_STYLE_USAGE(.BOTH.,#541666); +#541666 = SURFACE_SIDE_STYLE('',(#541667)); +#541667 = SURFACE_STYLE_FILL_AREA(#541668); +#541668 = FILL_AREA_STYLE('',(#541669)); +#541669 = FILL_AREA_STYLE_COLOUR('',#510798); +#541670 = OVER_RIDING_STYLED_ITEM('overriding color',(#541671),#25557, + #540522); +#541671 = PRESENTATION_STYLE_ASSIGNMENT((#541672)); +#541672 = SURFACE_STYLE_USAGE(.BOTH.,#541673); +#541673 = SURFACE_SIDE_STYLE('',(#541674)); +#541674 = SURFACE_STYLE_FILL_AREA(#541675); +#541675 = FILL_AREA_STYLE('',(#541676)); +#541676 = FILL_AREA_STYLE_COLOUR('',#510798); +#541677 = OVER_RIDING_STYLED_ITEM('overriding color',(#541678),#25581, + #540522); +#541678 = PRESENTATION_STYLE_ASSIGNMENT((#541679)); +#541679 = SURFACE_STYLE_USAGE(.BOTH.,#541680); +#541680 = SURFACE_SIDE_STYLE('',(#541681)); +#541681 = SURFACE_STYLE_FILL_AREA(#541682); +#541682 = FILL_AREA_STYLE('',(#541683)); +#541683 = FILL_AREA_STYLE_COLOUR('',#510798); +#541684 = OVER_RIDING_STYLED_ITEM('overriding color',(#541685),#25605, + #540522); +#541685 = PRESENTATION_STYLE_ASSIGNMENT((#541686)); +#541686 = SURFACE_STYLE_USAGE(.BOTH.,#541687); +#541687 = SURFACE_SIDE_STYLE('',(#541688)); +#541688 = SURFACE_STYLE_FILL_AREA(#541689); +#541689 = FILL_AREA_STYLE('',(#541690)); +#541690 = FILL_AREA_STYLE_COLOUR('',#510798); +#541691 = OVER_RIDING_STYLED_ITEM('overriding color',(#541692),#25622, + #540522); +#541692 = PRESENTATION_STYLE_ASSIGNMENT((#541693)); +#541693 = SURFACE_STYLE_USAGE(.BOTH.,#541694); +#541694 = SURFACE_SIDE_STYLE('',(#541695)); +#541695 = SURFACE_STYLE_FILL_AREA(#541696); +#541696 = FILL_AREA_STYLE('',(#541697)); +#541697 = FILL_AREA_STYLE_COLOUR('',#510798); +#541698 = OVER_RIDING_STYLED_ITEM('overriding color',(#541699),#25636, + #540522); +#541699 = PRESENTATION_STYLE_ASSIGNMENT((#541700)); +#541700 = SURFACE_STYLE_USAGE(.BOTH.,#541701); +#541701 = SURFACE_SIDE_STYLE('',(#541702)); +#541702 = SURFACE_STYLE_FILL_AREA(#541703); +#541703 = FILL_AREA_STYLE('',(#541704)); +#541704 = FILL_AREA_STYLE_COLOUR('',#510798); +#541705 = OVER_RIDING_STYLED_ITEM('overriding color',(#541706),#25672, + #540522); +#541706 = PRESENTATION_STYLE_ASSIGNMENT((#541707)); +#541707 = SURFACE_STYLE_USAGE(.BOTH.,#541708); +#541708 = SURFACE_SIDE_STYLE('',(#541709)); +#541709 = SURFACE_STYLE_FILL_AREA(#541710); +#541710 = FILL_AREA_STYLE('',(#541711)); +#541711 = FILL_AREA_STYLE_COLOUR('',#510798); +#541712 = OVER_RIDING_STYLED_ITEM('overriding color',(#541713),#25696, + #540522); +#541713 = PRESENTATION_STYLE_ASSIGNMENT((#541714)); +#541714 = SURFACE_STYLE_USAGE(.BOTH.,#541715); +#541715 = SURFACE_SIDE_STYLE('',(#541716)); +#541716 = SURFACE_STYLE_FILL_AREA(#541717); +#541717 = FILL_AREA_STYLE('',(#541718)); +#541718 = FILL_AREA_STYLE_COLOUR('',#510798); +#541719 = OVER_RIDING_STYLED_ITEM('overriding color',(#541720),#25725, + #540522); +#541720 = PRESENTATION_STYLE_ASSIGNMENT((#541721)); +#541721 = SURFACE_STYLE_USAGE(.BOTH.,#541722); +#541722 = SURFACE_SIDE_STYLE('',(#541723)); +#541723 = SURFACE_STYLE_FILL_AREA(#541724); +#541724 = FILL_AREA_STYLE('',(#541725)); +#541725 = FILL_AREA_STYLE_COLOUR('',#510798); +#541726 = OVER_RIDING_STYLED_ITEM('overriding color',(#541727),#25754, + #540522); +#541727 = PRESENTATION_STYLE_ASSIGNMENT((#541728)); +#541728 = SURFACE_STYLE_USAGE(.BOTH.,#541729); +#541729 = SURFACE_SIDE_STYLE('',(#541730)); +#541730 = SURFACE_STYLE_FILL_AREA(#541731); +#541731 = FILL_AREA_STYLE('',(#541732)); +#541732 = FILL_AREA_STYLE_COLOUR('',#510798); +#541733 = OVER_RIDING_STYLED_ITEM('overriding color',(#541734),#25783, + #540522); +#541734 = PRESENTATION_STYLE_ASSIGNMENT((#541735)); +#541735 = SURFACE_STYLE_USAGE(.BOTH.,#541736); +#541736 = SURFACE_SIDE_STYLE('',(#541737)); +#541737 = SURFACE_STYLE_FILL_AREA(#541738); +#541738 = FILL_AREA_STYLE('',(#541739)); +#541739 = FILL_AREA_STYLE_COLOUR('',#510798); +#541740 = OVER_RIDING_STYLED_ITEM('overriding color',(#541741),#25812, + #540522); +#541741 = PRESENTATION_STYLE_ASSIGNMENT((#541742)); +#541742 = SURFACE_STYLE_USAGE(.BOTH.,#541743); +#541743 = SURFACE_SIDE_STYLE('',(#541744)); +#541744 = SURFACE_STYLE_FILL_AREA(#541745); +#541745 = FILL_AREA_STYLE('',(#541746)); +#541746 = FILL_AREA_STYLE_COLOUR('',#510798); +#541747 = OVER_RIDING_STYLED_ITEM('overriding color',(#541748),#25841, + #540522); +#541748 = PRESENTATION_STYLE_ASSIGNMENT((#541749)); +#541749 = SURFACE_STYLE_USAGE(.BOTH.,#541750); +#541750 = SURFACE_SIDE_STYLE('',(#541751)); +#541751 = SURFACE_STYLE_FILL_AREA(#541752); +#541752 = FILL_AREA_STYLE('',(#541753)); +#541753 = FILL_AREA_STYLE_COLOUR('',#510798); +#541754 = OVER_RIDING_STYLED_ITEM('overriding color',(#541755),#25870, + #540522); +#541755 = PRESENTATION_STYLE_ASSIGNMENT((#541756)); +#541756 = SURFACE_STYLE_USAGE(.BOTH.,#541757); +#541757 = SURFACE_SIDE_STYLE('',(#541758)); +#541758 = SURFACE_STYLE_FILL_AREA(#541759); +#541759 = FILL_AREA_STYLE('',(#541760)); +#541760 = FILL_AREA_STYLE_COLOUR('',#510798); +#541761 = OVER_RIDING_STYLED_ITEM('overriding color',(#541762),#25894, + #540522); +#541762 = PRESENTATION_STYLE_ASSIGNMENT((#541763)); +#541763 = SURFACE_STYLE_USAGE(.BOTH.,#541764); +#541764 = SURFACE_SIDE_STYLE('',(#541765)); +#541765 = SURFACE_STYLE_FILL_AREA(#541766); +#541766 = FILL_AREA_STYLE('',(#541767)); +#541767 = FILL_AREA_STYLE_COLOUR('',#510798); +#541768 = OVER_RIDING_STYLED_ITEM('overriding color',(#541769),#25923, + #540522); +#541769 = PRESENTATION_STYLE_ASSIGNMENT((#541770)); +#541770 = SURFACE_STYLE_USAGE(.BOTH.,#541771); +#541771 = SURFACE_SIDE_STYLE('',(#541772)); +#541772 = SURFACE_STYLE_FILL_AREA(#541773); +#541773 = FILL_AREA_STYLE('',(#541774)); +#541774 = FILL_AREA_STYLE_COLOUR('',#510798); +#541775 = OVER_RIDING_STYLED_ITEM('overriding color',(#541776),#25952, + #540522); +#541776 = PRESENTATION_STYLE_ASSIGNMENT((#541777)); +#541777 = SURFACE_STYLE_USAGE(.BOTH.,#541778); +#541778 = SURFACE_SIDE_STYLE('',(#541779)); +#541779 = SURFACE_STYLE_FILL_AREA(#541780); +#541780 = FILL_AREA_STYLE('',(#541781)); +#541781 = FILL_AREA_STYLE_COLOUR('',#510798); +#541782 = OVER_RIDING_STYLED_ITEM('overriding color',(#541783),#25981, + #540522); +#541783 = PRESENTATION_STYLE_ASSIGNMENT((#541784)); +#541784 = SURFACE_STYLE_USAGE(.BOTH.,#541785); +#541785 = SURFACE_SIDE_STYLE('',(#541786)); +#541786 = SURFACE_STYLE_FILL_AREA(#541787); +#541787 = FILL_AREA_STYLE('',(#541788)); +#541788 = FILL_AREA_STYLE_COLOUR('',#510798); +#541789 = OVER_RIDING_STYLED_ITEM('overriding color',(#541790),#26010, + #540522); +#541790 = PRESENTATION_STYLE_ASSIGNMENT((#541791)); +#541791 = SURFACE_STYLE_USAGE(.BOTH.,#541792); +#541792 = SURFACE_SIDE_STYLE('',(#541793)); +#541793 = SURFACE_STYLE_FILL_AREA(#541794); +#541794 = FILL_AREA_STYLE('',(#541795)); +#541795 = FILL_AREA_STYLE_COLOUR('',#510798); +#541796 = OVER_RIDING_STYLED_ITEM('overriding color',(#541797),#26032, + #540522); +#541797 = PRESENTATION_STYLE_ASSIGNMENT((#541798)); +#541798 = SURFACE_STYLE_USAGE(.BOTH.,#541799); +#541799 = SURFACE_SIDE_STYLE('',(#541800)); +#541800 = SURFACE_STYLE_FILL_AREA(#541801); +#541801 = FILL_AREA_STYLE('',(#541802)); +#541802 = FILL_AREA_STYLE_COLOUR('',#510798); +#541803 = OVER_RIDING_STYLED_ITEM('overriding color',(#541804),#26054, + #540522); +#541804 = PRESENTATION_STYLE_ASSIGNMENT((#541805)); +#541805 = SURFACE_STYLE_USAGE(.BOTH.,#541806); +#541806 = SURFACE_SIDE_STYLE('',(#541807)); +#541807 = SURFACE_STYLE_FILL_AREA(#541808); +#541808 = FILL_AREA_STYLE('',(#541809)); +#541809 = FILL_AREA_STYLE_COLOUR('',#510798); +#541810 = OVER_RIDING_STYLED_ITEM('overriding color',(#541811),#26085, + #540522); +#541811 = PRESENTATION_STYLE_ASSIGNMENT((#541812)); +#541812 = SURFACE_STYLE_USAGE(.BOTH.,#541813); +#541813 = SURFACE_SIDE_STYLE('',(#541814)); +#541814 = SURFACE_STYLE_FILL_AREA(#541815); +#541815 = FILL_AREA_STYLE('',(#541816)); +#541816 = FILL_AREA_STYLE_COLOUR('',#510798); +#541817 = OVER_RIDING_STYLED_ITEM('overriding color',(#541818),#26109, + #540522); +#541818 = PRESENTATION_STYLE_ASSIGNMENT((#541819)); +#541819 = SURFACE_STYLE_USAGE(.BOTH.,#541820); +#541820 = SURFACE_SIDE_STYLE('',(#541821)); +#541821 = SURFACE_STYLE_FILL_AREA(#541822); +#541822 = FILL_AREA_STYLE('',(#541823)); +#541823 = FILL_AREA_STYLE_COLOUR('',#510798); +#541824 = OVER_RIDING_STYLED_ITEM('overriding color',(#541825),#26133, + #540522); +#541825 = PRESENTATION_STYLE_ASSIGNMENT((#541826)); +#541826 = SURFACE_STYLE_USAGE(.BOTH.,#541827); +#541827 = SURFACE_SIDE_STYLE('',(#541828)); +#541828 = SURFACE_STYLE_FILL_AREA(#541829); +#541829 = FILL_AREA_STYLE('',(#541830)); +#541830 = FILL_AREA_STYLE_COLOUR('',#510798); +#541831 = OVER_RIDING_STYLED_ITEM('overriding color',(#541832),#26157, + #540522); +#541832 = PRESENTATION_STYLE_ASSIGNMENT((#541833)); +#541833 = SURFACE_STYLE_USAGE(.BOTH.,#541834); +#541834 = SURFACE_SIDE_STYLE('',(#541835)); +#541835 = SURFACE_STYLE_FILL_AREA(#541836); +#541836 = FILL_AREA_STYLE('',(#541837)); +#541837 = FILL_AREA_STYLE_COLOUR('',#510798); +#541838 = OVER_RIDING_STYLED_ITEM('overriding color',(#541839),#26181, + #540522); +#541839 = PRESENTATION_STYLE_ASSIGNMENT((#541840)); +#541840 = SURFACE_STYLE_USAGE(.BOTH.,#541841); +#541841 = SURFACE_SIDE_STYLE('',(#541842)); +#541842 = SURFACE_STYLE_FILL_AREA(#541843); +#541843 = FILL_AREA_STYLE('',(#541844)); +#541844 = FILL_AREA_STYLE_COLOUR('',#510798); +#541845 = OVER_RIDING_STYLED_ITEM('overriding color',(#541846),#26205, + #540522); +#541846 = PRESENTATION_STYLE_ASSIGNMENT((#541847)); +#541847 = SURFACE_STYLE_USAGE(.BOTH.,#541848); +#541848 = SURFACE_SIDE_STYLE('',(#541849)); +#541849 = SURFACE_STYLE_FILL_AREA(#541850); +#541850 = FILL_AREA_STYLE('',(#541851)); +#541851 = FILL_AREA_STYLE_COLOUR('',#510798); +#541852 = OVER_RIDING_STYLED_ITEM('overriding color',(#541853),#26229, + #540522); +#541853 = PRESENTATION_STYLE_ASSIGNMENT((#541854)); +#541854 = SURFACE_STYLE_USAGE(.BOTH.,#541855); +#541855 = SURFACE_SIDE_STYLE('',(#541856)); +#541856 = SURFACE_STYLE_FILL_AREA(#541857); +#541857 = FILL_AREA_STYLE('',(#541858)); +#541858 = FILL_AREA_STYLE_COLOUR('',#510798); +#541859 = OVER_RIDING_STYLED_ITEM('overriding color',(#541860),#26253, + #540522); +#541860 = PRESENTATION_STYLE_ASSIGNMENT((#541861)); +#541861 = SURFACE_STYLE_USAGE(.BOTH.,#541862); +#541862 = SURFACE_SIDE_STYLE('',(#541863)); +#541863 = SURFACE_STYLE_FILL_AREA(#541864); +#541864 = FILL_AREA_STYLE('',(#541865)); +#541865 = FILL_AREA_STYLE_COLOUR('',#510798); +#541866 = OVER_RIDING_STYLED_ITEM('overriding color',(#541867),#26277, + #540522); +#541867 = PRESENTATION_STYLE_ASSIGNMENT((#541868)); +#541868 = SURFACE_STYLE_USAGE(.BOTH.,#541869); +#541869 = SURFACE_SIDE_STYLE('',(#541870)); +#541870 = SURFACE_STYLE_FILL_AREA(#541871); +#541871 = FILL_AREA_STYLE('',(#541872)); +#541872 = FILL_AREA_STYLE_COLOUR('',#510798); +#541873 = OVER_RIDING_STYLED_ITEM('overriding color',(#541874),#26301, + #540522); +#541874 = PRESENTATION_STYLE_ASSIGNMENT((#541875)); +#541875 = SURFACE_STYLE_USAGE(.BOTH.,#541876); +#541876 = SURFACE_SIDE_STYLE('',(#541877)); +#541877 = SURFACE_STYLE_FILL_AREA(#541878); +#541878 = FILL_AREA_STYLE('',(#541879)); +#541879 = FILL_AREA_STYLE_COLOUR('',#510798); +#541880 = OVER_RIDING_STYLED_ITEM('overriding color',(#541881),#26325, + #540522); +#541881 = PRESENTATION_STYLE_ASSIGNMENT((#541882)); +#541882 = SURFACE_STYLE_USAGE(.BOTH.,#541883); +#541883 = SURFACE_SIDE_STYLE('',(#541884)); +#541884 = SURFACE_STYLE_FILL_AREA(#541885); +#541885 = FILL_AREA_STYLE('',(#541886)); +#541886 = FILL_AREA_STYLE_COLOUR('',#510798); +#541887 = OVER_RIDING_STYLED_ITEM('overriding color',(#541888),#26342, + #540522); +#541888 = PRESENTATION_STYLE_ASSIGNMENT((#541889)); +#541889 = SURFACE_STYLE_USAGE(.BOTH.,#541890); +#541890 = SURFACE_SIDE_STYLE('',(#541891)); +#541891 = SURFACE_STYLE_FILL_AREA(#541892); +#541892 = FILL_AREA_STYLE('',(#541893)); +#541893 = FILL_AREA_STYLE_COLOUR('',#510798); +#541894 = OVER_RIDING_STYLED_ITEM('overriding color',(#541895),#26362, + #540522); +#541895 = PRESENTATION_STYLE_ASSIGNMENT((#541896)); +#541896 = SURFACE_STYLE_USAGE(.BOTH.,#541897); +#541897 = SURFACE_SIDE_STYLE('',(#541898)); +#541898 = SURFACE_STYLE_FILL_AREA(#541899); +#541899 = FILL_AREA_STYLE('',(#541900)); +#541900 = FILL_AREA_STYLE_COLOUR('',#510798); +#541901 = OVER_RIDING_STYLED_ITEM('overriding color',(#541902),#26492, + #540522); +#541902 = PRESENTATION_STYLE_ASSIGNMENT((#541903)); +#541903 = SURFACE_STYLE_USAGE(.BOTH.,#541904); +#541904 = SURFACE_SIDE_STYLE('',(#541905)); +#541905 = SURFACE_STYLE_FILL_AREA(#541906); +#541906 = FILL_AREA_STYLE('',(#541907)); +#541907 = FILL_AREA_STYLE_COLOUR('',#510798); +#541908 = OVER_RIDING_STYLED_ITEM('overriding color',(#541909),#26514, + #540522); +#541909 = PRESENTATION_STYLE_ASSIGNMENT((#541910)); +#541910 = SURFACE_STYLE_USAGE(.BOTH.,#541911); +#541911 = SURFACE_SIDE_STYLE('',(#541912)); +#541912 = SURFACE_STYLE_FILL_AREA(#541913); +#541913 = FILL_AREA_STYLE('',(#541914)); +#541914 = FILL_AREA_STYLE_COLOUR('',#510798); +#541915 = OVER_RIDING_STYLED_ITEM('overriding color',(#541916),#26535, + #540522); +#541916 = PRESENTATION_STYLE_ASSIGNMENT((#541917)); +#541917 = SURFACE_STYLE_USAGE(.BOTH.,#541918); +#541918 = SURFACE_SIDE_STYLE('',(#541919)); +#541919 = SURFACE_STYLE_FILL_AREA(#541920); +#541920 = FILL_AREA_STYLE('',(#541921)); +#541921 = FILL_AREA_STYLE_COLOUR('',#510798); +#541922 = OVER_RIDING_STYLED_ITEM('overriding color',(#541923),#26556, + #540522); +#541923 = PRESENTATION_STYLE_ASSIGNMENT((#541924)); +#541924 = SURFACE_STYLE_USAGE(.BOTH.,#541925); +#541925 = SURFACE_SIDE_STYLE('',(#541926)); +#541926 = SURFACE_STYLE_FILL_AREA(#541927); +#541927 = FILL_AREA_STYLE('',(#541928)); +#541928 = FILL_AREA_STYLE_COLOUR('',#510798); +#541929 = OVER_RIDING_STYLED_ITEM('overriding color',(#541930),#26577, + #540522); +#541930 = PRESENTATION_STYLE_ASSIGNMENT((#541931)); +#541931 = SURFACE_STYLE_USAGE(.BOTH.,#541932); +#541932 = SURFACE_SIDE_STYLE('',(#541933)); +#541933 = SURFACE_STYLE_FILL_AREA(#541934); +#541934 = FILL_AREA_STYLE('',(#541935)); +#541935 = FILL_AREA_STYLE_COLOUR('',#510798); +#541936 = OVER_RIDING_STYLED_ITEM('overriding color',(#541937),#26598, + #540522); +#541937 = PRESENTATION_STYLE_ASSIGNMENT((#541938)); +#541938 = SURFACE_STYLE_USAGE(.BOTH.,#541939); +#541939 = SURFACE_SIDE_STYLE('',(#541940)); +#541940 = SURFACE_STYLE_FILL_AREA(#541941); +#541941 = FILL_AREA_STYLE('',(#541942)); +#541942 = FILL_AREA_STYLE_COLOUR('',#510798); +#541943 = OVER_RIDING_STYLED_ITEM('overriding color',(#541944),#26615, + #540522); +#541944 = PRESENTATION_STYLE_ASSIGNMENT((#541945)); +#541945 = SURFACE_STYLE_USAGE(.BOTH.,#541946); +#541946 = SURFACE_SIDE_STYLE('',(#541947)); +#541947 = SURFACE_STYLE_FILL_AREA(#541948); +#541948 = FILL_AREA_STYLE('',(#541949)); +#541949 = FILL_AREA_STYLE_COLOUR('',#510798); +#541950 = OVER_RIDING_STYLED_ITEM('overriding color',(#541951),#26627, + #540522); +#541951 = PRESENTATION_STYLE_ASSIGNMENT((#541952)); +#541952 = SURFACE_STYLE_USAGE(.BOTH.,#541953); +#541953 = SURFACE_SIDE_STYLE('',(#541954)); +#541954 = SURFACE_STYLE_FILL_AREA(#541955); +#541955 = FILL_AREA_STYLE('',(#541956)); +#541956 = FILL_AREA_STYLE_COLOUR('',#510798); +#541957 = OVER_RIDING_STYLED_ITEM('overriding color',(#541958),#26658, + #540522); +#541958 = PRESENTATION_STYLE_ASSIGNMENT((#541959)); +#541959 = SURFACE_STYLE_USAGE(.BOTH.,#541960); +#541960 = SURFACE_SIDE_STYLE('',(#541961)); +#541961 = SURFACE_STYLE_FILL_AREA(#541962); +#541962 = FILL_AREA_STYLE('',(#541963)); +#541963 = FILL_AREA_STYLE_COLOUR('',#510798); +#541964 = OVER_RIDING_STYLED_ITEM('overriding color',(#541965),#26682, + #540522); +#541965 = PRESENTATION_STYLE_ASSIGNMENT((#541966)); +#541966 = SURFACE_STYLE_USAGE(.BOTH.,#541967); +#541967 = SURFACE_SIDE_STYLE('',(#541968)); +#541968 = SURFACE_STYLE_FILL_AREA(#541969); +#541969 = FILL_AREA_STYLE('',(#541970)); +#541970 = FILL_AREA_STYLE_COLOUR('',#510798); +#541971 = OVER_RIDING_STYLED_ITEM('overriding color',(#541972),#26706, + #540522); +#541972 = PRESENTATION_STYLE_ASSIGNMENT((#541973)); +#541973 = SURFACE_STYLE_USAGE(.BOTH.,#541974); +#541974 = SURFACE_SIDE_STYLE('',(#541975)); +#541975 = SURFACE_STYLE_FILL_AREA(#541976); +#541976 = FILL_AREA_STYLE('',(#541977)); +#541977 = FILL_AREA_STYLE_COLOUR('',#510798); +#541978 = OVER_RIDING_STYLED_ITEM('overriding color',(#541979),#26735, + #540522); +#541979 = PRESENTATION_STYLE_ASSIGNMENT((#541980)); +#541980 = SURFACE_STYLE_USAGE(.BOTH.,#541981); +#541981 = SURFACE_SIDE_STYLE('',(#541982)); +#541982 = SURFACE_STYLE_FILL_AREA(#541983); +#541983 = FILL_AREA_STYLE('',(#541984)); +#541984 = FILL_AREA_STYLE_COLOUR('',#510798); +#541985 = OVER_RIDING_STYLED_ITEM('overriding color',(#541986),#26764, + #540522); +#541986 = PRESENTATION_STYLE_ASSIGNMENT((#541987)); +#541987 = SURFACE_STYLE_USAGE(.BOTH.,#541988); +#541988 = SURFACE_SIDE_STYLE('',(#541989)); +#541989 = SURFACE_STYLE_FILL_AREA(#541990); +#541990 = FILL_AREA_STYLE('',(#541991)); +#541991 = FILL_AREA_STYLE_COLOUR('',#510798); +#541992 = OVER_RIDING_STYLED_ITEM('overriding color',(#541993),#26793, + #540522); +#541993 = PRESENTATION_STYLE_ASSIGNMENT((#541994)); +#541994 = SURFACE_STYLE_USAGE(.BOTH.,#541995); +#541995 = SURFACE_SIDE_STYLE('',(#541996)); +#541996 = SURFACE_STYLE_FILL_AREA(#541997); +#541997 = FILL_AREA_STYLE('',(#541998)); +#541998 = FILL_AREA_STYLE_COLOUR('',#510798); +#541999 = OVER_RIDING_STYLED_ITEM('overriding color',(#542000),#26815, + #540522); +#542000 = PRESENTATION_STYLE_ASSIGNMENT((#542001)); +#542001 = SURFACE_STYLE_USAGE(.BOTH.,#542002); +#542002 = SURFACE_SIDE_STYLE('',(#542003)); +#542003 = SURFACE_STYLE_FILL_AREA(#542004); +#542004 = FILL_AREA_STYLE('',(#542005)); +#542005 = FILL_AREA_STYLE_COLOUR('',#506700); +#542006 = OVER_RIDING_STYLED_ITEM('overriding color',(#542007),#26830, + #540522); +#542007 = PRESENTATION_STYLE_ASSIGNMENT((#542008)); +#542008 = SURFACE_STYLE_USAGE(.BOTH.,#542009); +#542009 = SURFACE_SIDE_STYLE('',(#542010)); +#542010 = SURFACE_STYLE_FILL_AREA(#542011); +#542011 = FILL_AREA_STYLE('',(#542012)); +#542012 = FILL_AREA_STYLE_COLOUR('',#510798); +#542013 = OVER_RIDING_STYLED_ITEM('overriding color',(#542014),#26954, + #540522); +#542014 = PRESENTATION_STYLE_ASSIGNMENT((#542015)); +#542015 = SURFACE_STYLE_USAGE(.BOTH.,#542016); +#542016 = SURFACE_SIDE_STYLE('',(#542017)); +#542017 = SURFACE_STYLE_FILL_AREA(#542018); +#542018 = FILL_AREA_STYLE('',(#542019)); +#542019 = FILL_AREA_STYLE_COLOUR('',#510798); +#542020 = OVER_RIDING_STYLED_ITEM('overriding color',(#542021),#26976, + #540522); +#542021 = PRESENTATION_STYLE_ASSIGNMENT((#542022)); +#542022 = SURFACE_STYLE_USAGE(.BOTH.,#542023); +#542023 = SURFACE_SIDE_STYLE('',(#542024)); +#542024 = SURFACE_STYLE_FILL_AREA(#542025); +#542025 = FILL_AREA_STYLE('',(#542026)); +#542026 = FILL_AREA_STYLE_COLOUR('',#510798); +#542027 = OVER_RIDING_STYLED_ITEM('overriding color',(#542028),#26993, + #540522); +#542028 = PRESENTATION_STYLE_ASSIGNMENT((#542029)); +#542029 = SURFACE_STYLE_USAGE(.BOTH.,#542030); +#542030 = SURFACE_SIDE_STYLE('',(#542031)); +#542031 = SURFACE_STYLE_FILL_AREA(#542032); +#542032 = FILL_AREA_STYLE('',(#542033)); +#542033 = FILL_AREA_STYLE_COLOUR('',#510798); +#542034 = OVER_RIDING_STYLED_ITEM('overriding color',(#542035),#27010, + #540522); +#542035 = PRESENTATION_STYLE_ASSIGNMENT((#542036)); +#542036 = SURFACE_STYLE_USAGE(.BOTH.,#542037); +#542037 = SURFACE_SIDE_STYLE('',(#542038)); +#542038 = SURFACE_STYLE_FILL_AREA(#542039); +#542039 = FILL_AREA_STYLE('',(#542040)); +#542040 = FILL_AREA_STYLE_COLOUR('',#510798); +#542041 = OVER_RIDING_STYLED_ITEM('overriding color',(#542042),#27027, + #540522); +#542042 = PRESENTATION_STYLE_ASSIGNMENT((#542043)); +#542043 = SURFACE_STYLE_USAGE(.BOTH.,#542044); +#542044 = SURFACE_SIDE_STYLE('',(#542045)); +#542045 = SURFACE_STYLE_FILL_AREA(#542046); +#542046 = FILL_AREA_STYLE('',(#542047)); +#542047 = FILL_AREA_STYLE_COLOUR('',#510798); +#542048 = OVER_RIDING_STYLED_ITEM('overriding color',(#542049),#27044, + #540522); +#542049 = PRESENTATION_STYLE_ASSIGNMENT((#542050)); +#542050 = SURFACE_STYLE_USAGE(.BOTH.,#542051); +#542051 = SURFACE_SIDE_STYLE('',(#542052)); +#542052 = SURFACE_STYLE_FILL_AREA(#542053); +#542053 = FILL_AREA_STYLE('',(#542054)); +#542054 = FILL_AREA_STYLE_COLOUR('',#510798); +#542055 = OVER_RIDING_STYLED_ITEM('overriding color',(#542056),#27061, + #540522); +#542056 = PRESENTATION_STYLE_ASSIGNMENT((#542057)); +#542057 = SURFACE_STYLE_USAGE(.BOTH.,#542058); +#542058 = SURFACE_SIDE_STYLE('',(#542059)); +#542059 = SURFACE_STYLE_FILL_AREA(#542060); +#542060 = FILL_AREA_STYLE('',(#542061)); +#542061 = FILL_AREA_STYLE_COLOUR('',#510798); +#542062 = OVER_RIDING_STYLED_ITEM('overriding color',(#542063),#27078, + #540522); +#542063 = PRESENTATION_STYLE_ASSIGNMENT((#542064)); +#542064 = SURFACE_STYLE_USAGE(.BOTH.,#542065); +#542065 = SURFACE_SIDE_STYLE('',(#542066)); +#542066 = SURFACE_STYLE_FILL_AREA(#542067); +#542067 = FILL_AREA_STYLE('',(#542068)); +#542068 = FILL_AREA_STYLE_COLOUR('',#510798); +#542069 = OVER_RIDING_STYLED_ITEM('overriding color',(#542070),#27090, + #540522); +#542070 = PRESENTATION_STYLE_ASSIGNMENT((#542071)); +#542071 = SURFACE_STYLE_USAGE(.BOTH.,#542072); +#542072 = SURFACE_SIDE_STYLE('',(#542073)); +#542073 = SURFACE_STYLE_FILL_AREA(#542074); +#542074 = FILL_AREA_STYLE('',(#542075)); +#542075 = FILL_AREA_STYLE_COLOUR('',#510798); +#542076 = OVER_RIDING_STYLED_ITEM('overriding color',(#542077),#27121, + #540522); +#542077 = PRESENTATION_STYLE_ASSIGNMENT((#542078)); +#542078 = SURFACE_STYLE_USAGE(.BOTH.,#542079); +#542079 = SURFACE_SIDE_STYLE('',(#542080)); +#542080 = SURFACE_STYLE_FILL_AREA(#542081); +#542081 = FILL_AREA_STYLE('',(#542082)); +#542082 = FILL_AREA_STYLE_COLOUR('',#510798); +#542083 = OVER_RIDING_STYLED_ITEM('overriding color',(#542084),#27145, + #540522); +#542084 = PRESENTATION_STYLE_ASSIGNMENT((#542085)); +#542085 = SURFACE_STYLE_USAGE(.BOTH.,#542086); +#542086 = SURFACE_SIDE_STYLE('',(#542087)); +#542087 = SURFACE_STYLE_FILL_AREA(#542088); +#542088 = FILL_AREA_STYLE('',(#542089)); +#542089 = FILL_AREA_STYLE_COLOUR('',#510798); +#542090 = OVER_RIDING_STYLED_ITEM('overriding color',(#542091),#27174, + #540522); +#542091 = PRESENTATION_STYLE_ASSIGNMENT((#542092)); +#542092 = SURFACE_STYLE_USAGE(.BOTH.,#542093); +#542093 = SURFACE_SIDE_STYLE('',(#542094)); +#542094 = SURFACE_STYLE_FILL_AREA(#542095); +#542095 = FILL_AREA_STYLE('',(#542096)); +#542096 = FILL_AREA_STYLE_COLOUR('',#510798); +#542097 = OVER_RIDING_STYLED_ITEM('overriding color',(#542098),#27198, + #540522); +#542098 = PRESENTATION_STYLE_ASSIGNMENT((#542099)); +#542099 = SURFACE_STYLE_USAGE(.BOTH.,#542100); +#542100 = SURFACE_SIDE_STYLE('',(#542101)); +#542101 = SURFACE_STYLE_FILL_AREA(#542102); +#542102 = FILL_AREA_STYLE('',(#542103)); +#542103 = FILL_AREA_STYLE_COLOUR('',#510798); +#542104 = OVER_RIDING_STYLED_ITEM('overriding color',(#542105),#27227, + #540522); +#542105 = PRESENTATION_STYLE_ASSIGNMENT((#542106)); +#542106 = SURFACE_STYLE_USAGE(.BOTH.,#542107); +#542107 = SURFACE_SIDE_STYLE('',(#542108)); +#542108 = SURFACE_STYLE_FILL_AREA(#542109); +#542109 = FILL_AREA_STYLE('',(#542110)); +#542110 = FILL_AREA_STYLE_COLOUR('',#510798); +#542111 = OVER_RIDING_STYLED_ITEM('overriding color',(#542112),#27244, + #540522); +#542112 = PRESENTATION_STYLE_ASSIGNMENT((#542113)); +#542113 = SURFACE_STYLE_USAGE(.BOTH.,#542114); +#542114 = SURFACE_SIDE_STYLE('',(#542115)); +#542115 = SURFACE_STYLE_FILL_AREA(#542116); +#542116 = FILL_AREA_STYLE('',(#542117)); +#542117 = FILL_AREA_STYLE_COLOUR('',#506700); +#542118 = OVER_RIDING_STYLED_ITEM('overriding color',(#542119),#27258, + #540522); +#542119 = PRESENTATION_STYLE_ASSIGNMENT((#542120)); +#542120 = SURFACE_STYLE_USAGE(.BOTH.,#542121); +#542121 = SURFACE_SIDE_STYLE('',(#542122)); +#542122 = SURFACE_STYLE_FILL_AREA(#542123); +#542123 = FILL_AREA_STYLE('',(#542124)); +#542124 = FILL_AREA_STYLE_COLOUR('',#510798); +#542125 = OVER_RIDING_STYLED_ITEM('overriding color',(#542126),#27289, + #540522); +#542126 = PRESENTATION_STYLE_ASSIGNMENT((#542127)); +#542127 = SURFACE_STYLE_USAGE(.BOTH.,#542128); +#542128 = SURFACE_SIDE_STYLE('',(#542129)); +#542129 = SURFACE_STYLE_FILL_AREA(#542130); +#542130 = FILL_AREA_STYLE('',(#542131)); +#542131 = FILL_AREA_STYLE_COLOUR('',#510798); +#542132 = OVER_RIDING_STYLED_ITEM('overriding color',(#542133),#27313, + #540522); +#542133 = PRESENTATION_STYLE_ASSIGNMENT((#542134)); +#542134 = SURFACE_STYLE_USAGE(.BOTH.,#542135); +#542135 = SURFACE_SIDE_STYLE('',(#542136)); +#542136 = SURFACE_STYLE_FILL_AREA(#542137); +#542137 = FILL_AREA_STYLE('',(#542138)); +#542138 = FILL_AREA_STYLE_COLOUR('',#510798); +#542139 = OVER_RIDING_STYLED_ITEM('overriding color',(#542140),#27337, + #540522); +#542140 = PRESENTATION_STYLE_ASSIGNMENT((#542141)); +#542141 = SURFACE_STYLE_USAGE(.BOTH.,#542142); +#542142 = SURFACE_SIDE_STYLE('',(#542143)); +#542143 = SURFACE_STYLE_FILL_AREA(#542144); +#542144 = FILL_AREA_STYLE('',(#542145)); +#542145 = FILL_AREA_STYLE_COLOUR('',#510798); +#542146 = OVER_RIDING_STYLED_ITEM('overriding color',(#542147),#27361, + #540522); +#542147 = PRESENTATION_STYLE_ASSIGNMENT((#542148)); +#542148 = SURFACE_STYLE_USAGE(.BOTH.,#542149); +#542149 = SURFACE_SIDE_STYLE('',(#542150)); +#542150 = SURFACE_STYLE_FILL_AREA(#542151); +#542151 = FILL_AREA_STYLE('',(#542152)); +#542152 = FILL_AREA_STYLE_COLOUR('',#510798); +#542153 = OVER_RIDING_STYLED_ITEM('overriding color',(#542154),#27385, + #540522); +#542154 = PRESENTATION_STYLE_ASSIGNMENT((#542155)); +#542155 = SURFACE_STYLE_USAGE(.BOTH.,#542156); +#542156 = SURFACE_SIDE_STYLE('',(#542157)); +#542157 = SURFACE_STYLE_FILL_AREA(#542158); +#542158 = FILL_AREA_STYLE('',(#542159)); +#542159 = FILL_AREA_STYLE_COLOUR('',#510798); +#542160 = OVER_RIDING_STYLED_ITEM('overriding color',(#542161),#27409, + #540522); +#542161 = PRESENTATION_STYLE_ASSIGNMENT((#542162)); +#542162 = SURFACE_STYLE_USAGE(.BOTH.,#542163); +#542163 = SURFACE_SIDE_STYLE('',(#542164)); +#542164 = SURFACE_STYLE_FILL_AREA(#542165); +#542165 = FILL_AREA_STYLE('',(#542166)); +#542166 = FILL_AREA_STYLE_COLOUR('',#510798); +#542167 = OVER_RIDING_STYLED_ITEM('overriding color',(#542168),#27433, + #540522); +#542168 = PRESENTATION_STYLE_ASSIGNMENT((#542169)); +#542169 = SURFACE_STYLE_USAGE(.BOTH.,#542170); +#542170 = SURFACE_SIDE_STYLE('',(#542171)); +#542171 = SURFACE_STYLE_FILL_AREA(#542172); +#542172 = FILL_AREA_STYLE('',(#542173)); +#542173 = FILL_AREA_STYLE_COLOUR('',#510798); +#542174 = OVER_RIDING_STYLED_ITEM('overriding color',(#542175),#27457, + #540522); +#542175 = PRESENTATION_STYLE_ASSIGNMENT((#542176)); +#542176 = SURFACE_STYLE_USAGE(.BOTH.,#542177); +#542177 = SURFACE_SIDE_STYLE('',(#542178)); +#542178 = SURFACE_STYLE_FILL_AREA(#542179); +#542179 = FILL_AREA_STYLE('',(#542180)); +#542180 = FILL_AREA_STYLE_COLOUR('',#510798); +#542181 = OVER_RIDING_STYLED_ITEM('overriding color',(#542182),#27481, + #540522); +#542182 = PRESENTATION_STYLE_ASSIGNMENT((#542183)); +#542183 = SURFACE_STYLE_USAGE(.BOTH.,#542184); +#542184 = SURFACE_SIDE_STYLE('',(#542185)); +#542185 = SURFACE_STYLE_FILL_AREA(#542186); +#542186 = FILL_AREA_STYLE('',(#542187)); +#542187 = FILL_AREA_STYLE_COLOUR('',#510798); +#542188 = OVER_RIDING_STYLED_ITEM('overriding color',(#542189),#27505, + #540522); +#542189 = PRESENTATION_STYLE_ASSIGNMENT((#542190)); +#542190 = SURFACE_STYLE_USAGE(.BOTH.,#542191); +#542191 = SURFACE_SIDE_STYLE('',(#542192)); +#542192 = SURFACE_STYLE_FILL_AREA(#542193); +#542193 = FILL_AREA_STYLE('',(#542194)); +#542194 = FILL_AREA_STYLE_COLOUR('',#510798); +#542195 = OVER_RIDING_STYLED_ITEM('overriding color',(#542196),#27529, + #540522); +#542196 = PRESENTATION_STYLE_ASSIGNMENT((#542197)); +#542197 = SURFACE_STYLE_USAGE(.BOTH.,#542198); +#542198 = SURFACE_SIDE_STYLE('',(#542199)); +#542199 = SURFACE_STYLE_FILL_AREA(#542200); +#542200 = FILL_AREA_STYLE('',(#542201)); +#542201 = FILL_AREA_STYLE_COLOUR('',#510798); +#542202 = OVER_RIDING_STYLED_ITEM('overriding color',(#542203),#27546, + #540522); +#542203 = PRESENTATION_STYLE_ASSIGNMENT((#542204)); +#542204 = SURFACE_STYLE_USAGE(.BOTH.,#542205); +#542205 = SURFACE_SIDE_STYLE('',(#542206)); +#542206 = SURFACE_STYLE_FILL_AREA(#542207); +#542207 = FILL_AREA_STYLE('',(#542208)); +#542208 = FILL_AREA_STYLE_COLOUR('',#510798); +#542209 = OVER_RIDING_STYLED_ITEM('overriding color',(#542210),#27566, + #540522); +#542210 = PRESENTATION_STYLE_ASSIGNMENT((#542211)); +#542211 = SURFACE_STYLE_USAGE(.BOTH.,#542212); +#542212 = SURFACE_SIDE_STYLE('',(#542213)); +#542213 = SURFACE_STYLE_FILL_AREA(#542214); +#542214 = FILL_AREA_STYLE('',(#542215)); +#542215 = FILL_AREA_STYLE_COLOUR('',#510798); +#542216 = OVER_RIDING_STYLED_ITEM('overriding color',(#542217),#27766, + #540522); +#542217 = PRESENTATION_STYLE_ASSIGNMENT((#542218)); +#542218 = SURFACE_STYLE_USAGE(.BOTH.,#542219); +#542219 = SURFACE_SIDE_STYLE('',(#542220)); +#542220 = SURFACE_STYLE_FILL_AREA(#542221); +#542221 = FILL_AREA_STYLE('',(#542222)); +#542222 = FILL_AREA_STYLE_COLOUR('',#510798); +#542223 = OVER_RIDING_STYLED_ITEM('overriding color',(#542224),#27792, + #540522); +#542224 = PRESENTATION_STYLE_ASSIGNMENT((#542225)); +#542225 = SURFACE_STYLE_USAGE(.BOTH.,#542226); +#542226 = SURFACE_SIDE_STYLE('',(#542227)); +#542227 = SURFACE_STYLE_FILL_AREA(#542228); +#542228 = FILL_AREA_STYLE('',(#542229)); +#542229 = FILL_AREA_STYLE_COLOUR('',#510798); +#542230 = OVER_RIDING_STYLED_ITEM('overriding color',(#542231),#27809, + #540522); +#542231 = PRESENTATION_STYLE_ASSIGNMENT((#542232)); +#542232 = SURFACE_STYLE_USAGE(.BOTH.,#542233); +#542233 = SURFACE_SIDE_STYLE('',(#542234)); +#542234 = SURFACE_STYLE_FILL_AREA(#542235); +#542235 = FILL_AREA_STYLE('',(#542236)); +#542236 = FILL_AREA_STYLE_COLOUR('',#510798); +#542237 = OVER_RIDING_STYLED_ITEM('overriding color',(#542238),#27830, + #540522); +#542238 = PRESENTATION_STYLE_ASSIGNMENT((#542239)); +#542239 = SURFACE_STYLE_USAGE(.BOTH.,#542240); +#542240 = SURFACE_SIDE_STYLE('',(#542241)); +#542241 = SURFACE_STYLE_FILL_AREA(#542242); +#542242 = FILL_AREA_STYLE('',(#542243)); +#542243 = FILL_AREA_STYLE_COLOUR('',#510798); +#542244 = OVER_RIDING_STYLED_ITEM('overriding color',(#542245),#27851, + #540522); +#542245 = PRESENTATION_STYLE_ASSIGNMENT((#542246)); +#542246 = SURFACE_STYLE_USAGE(.BOTH.,#542247); +#542247 = SURFACE_SIDE_STYLE('',(#542248)); +#542248 = SURFACE_STYLE_FILL_AREA(#542249); +#542249 = FILL_AREA_STYLE('',(#542250)); +#542250 = FILL_AREA_STYLE_COLOUR('',#510798); +#542251 = OVER_RIDING_STYLED_ITEM('overriding color',(#542252),#27868, + #540522); +#542252 = PRESENTATION_STYLE_ASSIGNMENT((#542253)); +#542253 = SURFACE_STYLE_USAGE(.BOTH.,#542254); +#542254 = SURFACE_SIDE_STYLE('',(#542255)); +#542255 = SURFACE_STYLE_FILL_AREA(#542256); +#542256 = FILL_AREA_STYLE('',(#542257)); +#542257 = FILL_AREA_STYLE_COLOUR('',#510798); +#542258 = OVER_RIDING_STYLED_ITEM('overriding color',(#542259),#27889, + #540522); +#542259 = PRESENTATION_STYLE_ASSIGNMENT((#542260)); +#542260 = SURFACE_STYLE_USAGE(.BOTH.,#542261); +#542261 = SURFACE_SIDE_STYLE('',(#542262)); +#542262 = SURFACE_STYLE_FILL_AREA(#542263); +#542263 = FILL_AREA_STYLE('',(#542264)); +#542264 = FILL_AREA_STYLE_COLOUR('',#510798); +#542265 = OVER_RIDING_STYLED_ITEM('overriding color',(#542266),#27910, + #540522); +#542266 = PRESENTATION_STYLE_ASSIGNMENT((#542267)); +#542267 = SURFACE_STYLE_USAGE(.BOTH.,#542268); +#542268 = SURFACE_SIDE_STYLE('',(#542269)); +#542269 = SURFACE_STYLE_FILL_AREA(#542270); +#542270 = FILL_AREA_STYLE('',(#542271)); +#542271 = FILL_AREA_STYLE_COLOUR('',#510798); +#542272 = OVER_RIDING_STYLED_ITEM('overriding color',(#542273),#27931, + #540522); +#542273 = PRESENTATION_STYLE_ASSIGNMENT((#542274)); +#542274 = SURFACE_STYLE_USAGE(.BOTH.,#542275); +#542275 = SURFACE_SIDE_STYLE('',(#542276)); +#542276 = SURFACE_STYLE_FILL_AREA(#542277); +#542277 = FILL_AREA_STYLE('',(#542278)); +#542278 = FILL_AREA_STYLE_COLOUR('',#510798); +#542279 = OVER_RIDING_STYLED_ITEM('overriding color',(#542280),#27952, + #540522); +#542280 = PRESENTATION_STYLE_ASSIGNMENT((#542281)); +#542281 = SURFACE_STYLE_USAGE(.BOTH.,#542282); +#542282 = SURFACE_SIDE_STYLE('',(#542283)); +#542283 = SURFACE_STYLE_FILL_AREA(#542284); +#542284 = FILL_AREA_STYLE('',(#542285)); +#542285 = FILL_AREA_STYLE_COLOUR('',#510798); +#542286 = OVER_RIDING_STYLED_ITEM('overriding color',(#542287),#27969, + #540522); +#542287 = PRESENTATION_STYLE_ASSIGNMENT((#542288)); +#542288 = SURFACE_STYLE_USAGE(.BOTH.,#542289); +#542289 = SURFACE_SIDE_STYLE('',(#542290)); +#542290 = SURFACE_STYLE_FILL_AREA(#542291); +#542291 = FILL_AREA_STYLE('',(#542292)); +#542292 = FILL_AREA_STYLE_COLOUR('',#510798); +#542293 = OVER_RIDING_STYLED_ITEM('overriding color',(#542294),#27986, + #540522); +#542294 = PRESENTATION_STYLE_ASSIGNMENT((#542295)); +#542295 = SURFACE_STYLE_USAGE(.BOTH.,#542296); +#542296 = SURFACE_SIDE_STYLE('',(#542297)); +#542297 = SURFACE_STYLE_FILL_AREA(#542298); +#542298 = FILL_AREA_STYLE('',(#542299)); +#542299 = FILL_AREA_STYLE_COLOUR('',#510798); +#542300 = OVER_RIDING_STYLED_ITEM('overriding color',(#542301),#28003, + #540522); +#542301 = PRESENTATION_STYLE_ASSIGNMENT((#542302)); +#542302 = SURFACE_STYLE_USAGE(.BOTH.,#542303); +#542303 = SURFACE_SIDE_STYLE('',(#542304)); +#542304 = SURFACE_STYLE_FILL_AREA(#542305); +#542305 = FILL_AREA_STYLE('',(#542306)); +#542306 = FILL_AREA_STYLE_COLOUR('',#510798); +#542307 = OVER_RIDING_STYLED_ITEM('overriding color',(#542308),#28020, + #540522); +#542308 = PRESENTATION_STYLE_ASSIGNMENT((#542309)); +#542309 = SURFACE_STYLE_USAGE(.BOTH.,#542310); +#542310 = SURFACE_SIDE_STYLE('',(#542311)); +#542311 = SURFACE_STYLE_FILL_AREA(#542312); +#542312 = FILL_AREA_STYLE('',(#542313)); +#542313 = FILL_AREA_STYLE_COLOUR('',#510798); +#542314 = OVER_RIDING_STYLED_ITEM('overriding color',(#542315),#28036, + #540522); +#542315 = PRESENTATION_STYLE_ASSIGNMENT((#542316)); +#542316 = SURFACE_STYLE_USAGE(.BOTH.,#542317); +#542317 = SURFACE_SIDE_STYLE('',(#542318)); +#542318 = SURFACE_STYLE_FILL_AREA(#542319); +#542319 = FILL_AREA_STYLE('',(#542320)); +#542320 = FILL_AREA_STYLE_COLOUR('',#510798); +#542321 = OVER_RIDING_STYLED_ITEM('overriding color',(#542322),#28072, + #540522); +#542322 = PRESENTATION_STYLE_ASSIGNMENT((#542323)); +#542323 = SURFACE_STYLE_USAGE(.BOTH.,#542324); +#542324 = SURFACE_SIDE_STYLE('',(#542325)); +#542325 = SURFACE_STYLE_FILL_AREA(#542326); +#542326 = FILL_AREA_STYLE('',(#542327)); +#542327 = FILL_AREA_STYLE_COLOUR('',#510798); +#542328 = OVER_RIDING_STYLED_ITEM('overriding color',(#542329),#28101, + #540522); +#542329 = PRESENTATION_STYLE_ASSIGNMENT((#542330)); +#542330 = SURFACE_STYLE_USAGE(.BOTH.,#542331); +#542331 = SURFACE_SIDE_STYLE('',(#542332)); +#542332 = SURFACE_STYLE_FILL_AREA(#542333); +#542333 = FILL_AREA_STYLE('',(#542334)); +#542334 = FILL_AREA_STYLE_COLOUR('',#510798); +#542335 = OVER_RIDING_STYLED_ITEM('overriding color',(#542336),#28130, + #540522); +#542336 = PRESENTATION_STYLE_ASSIGNMENT((#542337)); +#542337 = SURFACE_STYLE_USAGE(.BOTH.,#542338); +#542338 = SURFACE_SIDE_STYLE('',(#542339)); +#542339 = SURFACE_STYLE_FILL_AREA(#542340); +#542340 = FILL_AREA_STYLE('',(#542341)); +#542341 = FILL_AREA_STYLE_COLOUR('',#510798); +#542342 = OVER_RIDING_STYLED_ITEM('overriding color',(#542343),#28159, + #540522); +#542343 = PRESENTATION_STYLE_ASSIGNMENT((#542344)); +#542344 = SURFACE_STYLE_USAGE(.BOTH.,#542345); +#542345 = SURFACE_SIDE_STYLE('',(#542346)); +#542346 = SURFACE_STYLE_FILL_AREA(#542347); +#542347 = FILL_AREA_STYLE('',(#542348)); +#542348 = FILL_AREA_STYLE_COLOUR('',#510798); +#542349 = OVER_RIDING_STYLED_ITEM('overriding color',(#542350),#28188, + #540522); +#542350 = PRESENTATION_STYLE_ASSIGNMENT((#542351)); +#542351 = SURFACE_STYLE_USAGE(.BOTH.,#542352); +#542352 = SURFACE_SIDE_STYLE('',(#542353)); +#542353 = SURFACE_STYLE_FILL_AREA(#542354); +#542354 = FILL_AREA_STYLE('',(#542355)); +#542355 = FILL_AREA_STYLE_COLOUR('',#510798); +#542356 = OVER_RIDING_STYLED_ITEM('overriding color',(#542357),#28217, + #540522); +#542357 = PRESENTATION_STYLE_ASSIGNMENT((#542358)); +#542358 = SURFACE_STYLE_USAGE(.BOTH.,#542359); +#542359 = SURFACE_SIDE_STYLE('',(#542360)); +#542360 = SURFACE_STYLE_FILL_AREA(#542361); +#542361 = FILL_AREA_STYLE('',(#542362)); +#542362 = FILL_AREA_STYLE_COLOUR('',#510798); +#542363 = OVER_RIDING_STYLED_ITEM('overriding color',(#542364),#28241, + #540522); +#542364 = PRESENTATION_STYLE_ASSIGNMENT((#542365)); +#542365 = SURFACE_STYLE_USAGE(.BOTH.,#542366); +#542366 = SURFACE_SIDE_STYLE('',(#542367)); +#542367 = SURFACE_STYLE_FILL_AREA(#542368); +#542368 = FILL_AREA_STYLE('',(#542369)); +#542369 = FILL_AREA_STYLE_COLOUR('',#510798); +#542370 = OVER_RIDING_STYLED_ITEM('overriding color',(#542371),#28258, + #540522); +#542371 = PRESENTATION_STYLE_ASSIGNMENT((#542372)); +#542372 = SURFACE_STYLE_USAGE(.BOTH.,#542373); +#542373 = SURFACE_SIDE_STYLE('',(#542374)); +#542374 = SURFACE_STYLE_FILL_AREA(#542375); +#542375 = FILL_AREA_STYLE('',(#542376)); +#542376 = FILL_AREA_STYLE_COLOUR('',#506700); +#542377 = OVER_RIDING_STYLED_ITEM('overriding color',(#542378),#28274, + #540522); +#542378 = PRESENTATION_STYLE_ASSIGNMENT((#542379)); +#542379 = SURFACE_STYLE_USAGE(.BOTH.,#542380); +#542380 = SURFACE_SIDE_STYLE('',(#542381)); +#542381 = SURFACE_STYLE_FILL_AREA(#542382); +#542382 = FILL_AREA_STYLE('',(#542383)); +#542383 = FILL_AREA_STYLE_COLOUR('',#510798); +#542384 = OVER_RIDING_STYLED_ITEM('overriding color',(#542385),#28310, + #540522); +#542385 = PRESENTATION_STYLE_ASSIGNMENT((#542386)); +#542386 = SURFACE_STYLE_USAGE(.BOTH.,#542387); +#542387 = SURFACE_SIDE_STYLE('',(#542388)); +#542388 = SURFACE_STYLE_FILL_AREA(#542389); +#542389 = FILL_AREA_STYLE('',(#542390)); +#542390 = FILL_AREA_STYLE_COLOUR('',#510798); +#542391 = OVER_RIDING_STYLED_ITEM('overriding color',(#542392),#28334, + #540522); +#542392 = PRESENTATION_STYLE_ASSIGNMENT((#542393)); +#542393 = SURFACE_STYLE_USAGE(.BOTH.,#542394); +#542394 = SURFACE_SIDE_STYLE('',(#542395)); +#542395 = SURFACE_STYLE_FILL_AREA(#542396); +#542396 = FILL_AREA_STYLE('',(#542397)); +#542397 = FILL_AREA_STYLE_COLOUR('',#510798); +#542398 = OVER_RIDING_STYLED_ITEM('overriding color',(#542399),#28363, + #540522); +#542399 = PRESENTATION_STYLE_ASSIGNMENT((#542400)); +#542400 = SURFACE_STYLE_USAGE(.BOTH.,#542401); +#542401 = SURFACE_SIDE_STYLE('',(#542402)); +#542402 = SURFACE_STYLE_FILL_AREA(#542403); +#542403 = FILL_AREA_STYLE('',(#542404)); +#542404 = FILL_AREA_STYLE_COLOUR('',#510798); +#542405 = OVER_RIDING_STYLED_ITEM('overriding color',(#542406),#28392, + #540522); +#542406 = PRESENTATION_STYLE_ASSIGNMENT((#542407)); +#542407 = SURFACE_STYLE_USAGE(.BOTH.,#542408); +#542408 = SURFACE_SIDE_STYLE('',(#542409)); +#542409 = SURFACE_STYLE_FILL_AREA(#542410); +#542410 = FILL_AREA_STYLE('',(#542411)); +#542411 = FILL_AREA_STYLE_COLOUR('',#510798); +#542412 = OVER_RIDING_STYLED_ITEM('overriding color',(#542413),#28421, + #540522); +#542413 = PRESENTATION_STYLE_ASSIGNMENT((#542414)); +#542414 = SURFACE_STYLE_USAGE(.BOTH.,#542415); +#542415 = SURFACE_SIDE_STYLE('',(#542416)); +#542416 = SURFACE_STYLE_FILL_AREA(#542417); +#542417 = FILL_AREA_STYLE('',(#542418)); +#542418 = FILL_AREA_STYLE_COLOUR('',#510798); +#542419 = OVER_RIDING_STYLED_ITEM('overriding color',(#542420),#28450, + #540522); +#542420 = PRESENTATION_STYLE_ASSIGNMENT((#542421)); +#542421 = SURFACE_STYLE_USAGE(.BOTH.,#542422); +#542422 = SURFACE_SIDE_STYLE('',(#542423)); +#542423 = SURFACE_STYLE_FILL_AREA(#542424); +#542424 = FILL_AREA_STYLE('',(#542425)); +#542425 = FILL_AREA_STYLE_COLOUR('',#510798); +#542426 = OVER_RIDING_STYLED_ITEM('overriding color',(#542427),#28479, + #540522); +#542427 = PRESENTATION_STYLE_ASSIGNMENT((#542428)); +#542428 = SURFACE_STYLE_USAGE(.BOTH.,#542429); +#542429 = SURFACE_SIDE_STYLE('',(#542430)); +#542430 = SURFACE_STYLE_FILL_AREA(#542431); +#542431 = FILL_AREA_STYLE('',(#542432)); +#542432 = FILL_AREA_STYLE_COLOUR('',#510798); +#542433 = OVER_RIDING_STYLED_ITEM('overriding color',(#542434),#28508, + #540522); +#542434 = PRESENTATION_STYLE_ASSIGNMENT((#542435)); +#542435 = SURFACE_STYLE_USAGE(.BOTH.,#542436); +#542436 = SURFACE_SIDE_STYLE('',(#542437)); +#542437 = SURFACE_STYLE_FILL_AREA(#542438); +#542438 = FILL_AREA_STYLE('',(#542439)); +#542439 = FILL_AREA_STYLE_COLOUR('',#510798); +#542440 = OVER_RIDING_STYLED_ITEM('overriding color',(#542441),#28537, + #540522); +#542441 = PRESENTATION_STYLE_ASSIGNMENT((#542442)); +#542442 = SURFACE_STYLE_USAGE(.BOTH.,#542443); +#542443 = SURFACE_SIDE_STYLE('',(#542444)); +#542444 = SURFACE_STYLE_FILL_AREA(#542445); +#542445 = FILL_AREA_STYLE('',(#542446)); +#542446 = FILL_AREA_STYLE_COLOUR('',#510798); +#542447 = OVER_RIDING_STYLED_ITEM('overriding color',(#542448),#28566, + #540522); +#542448 = PRESENTATION_STYLE_ASSIGNMENT((#542449)); +#542449 = SURFACE_STYLE_USAGE(.BOTH.,#542450); +#542450 = SURFACE_SIDE_STYLE('',(#542451)); +#542451 = SURFACE_STYLE_FILL_AREA(#542452); +#542452 = FILL_AREA_STYLE('',(#542453)); +#542453 = FILL_AREA_STYLE_COLOUR('',#510798); +#542454 = OVER_RIDING_STYLED_ITEM('overriding color',(#542455),#28595, + #540522); +#542455 = PRESENTATION_STYLE_ASSIGNMENT((#542456)); +#542456 = SURFACE_STYLE_USAGE(.BOTH.,#542457); +#542457 = SURFACE_SIDE_STYLE('',(#542458)); +#542458 = SURFACE_STYLE_FILL_AREA(#542459); +#542459 = FILL_AREA_STYLE('',(#542460)); +#542460 = FILL_AREA_STYLE_COLOUR('',#510798); +#542461 = OVER_RIDING_STYLED_ITEM('overriding color',(#542462),#28624, + #540522); +#542462 = PRESENTATION_STYLE_ASSIGNMENT((#542463)); +#542463 = SURFACE_STYLE_USAGE(.BOTH.,#542464); +#542464 = SURFACE_SIDE_STYLE('',(#542465)); +#542465 = SURFACE_STYLE_FILL_AREA(#542466); +#542466 = FILL_AREA_STYLE('',(#542467)); +#542467 = FILL_AREA_STYLE_COLOUR('',#510798); +#542468 = OVER_RIDING_STYLED_ITEM('overriding color',(#542469),#28648, + #540522); +#542469 = PRESENTATION_STYLE_ASSIGNMENT((#542470)); +#542470 = SURFACE_STYLE_USAGE(.BOTH.,#542471); +#542471 = SURFACE_SIDE_STYLE('',(#542472)); +#542472 = SURFACE_STYLE_FILL_AREA(#542473); +#542473 = FILL_AREA_STYLE('',(#542474)); +#542474 = FILL_AREA_STYLE_COLOUR('',#510798); +#542475 = OVER_RIDING_STYLED_ITEM('overriding color',(#542476),#28677, + #540522); +#542476 = PRESENTATION_STYLE_ASSIGNMENT((#542477)); +#542477 = SURFACE_STYLE_USAGE(.BOTH.,#542478); +#542478 = SURFACE_SIDE_STYLE('',(#542479)); +#542479 = SURFACE_STYLE_FILL_AREA(#542480); +#542480 = FILL_AREA_STYLE('',(#542481)); +#542481 = FILL_AREA_STYLE_COLOUR('',#510798); +#542482 = OVER_RIDING_STYLED_ITEM('overriding color',(#542483),#28706, + #540522); +#542483 = PRESENTATION_STYLE_ASSIGNMENT((#542484)); +#542484 = SURFACE_STYLE_USAGE(.BOTH.,#542485); +#542485 = SURFACE_SIDE_STYLE('',(#542486)); +#542486 = SURFACE_STYLE_FILL_AREA(#542487); +#542487 = FILL_AREA_STYLE('',(#542488)); +#542488 = FILL_AREA_STYLE_COLOUR('',#510798); +#542489 = OVER_RIDING_STYLED_ITEM('overriding color',(#542490),#28735, + #540522); +#542490 = PRESENTATION_STYLE_ASSIGNMENT((#542491)); +#542491 = SURFACE_STYLE_USAGE(.BOTH.,#542492); +#542492 = SURFACE_SIDE_STYLE('',(#542493)); +#542493 = SURFACE_STYLE_FILL_AREA(#542494); +#542494 = FILL_AREA_STYLE('',(#542495)); +#542495 = FILL_AREA_STYLE_COLOUR('',#510798); +#542496 = OVER_RIDING_STYLED_ITEM('overriding color',(#542497),#28764, + #540522); +#542497 = PRESENTATION_STYLE_ASSIGNMENT((#542498)); +#542498 = SURFACE_STYLE_USAGE(.BOTH.,#542499); +#542499 = SURFACE_SIDE_STYLE('',(#542500)); +#542500 = SURFACE_STYLE_FILL_AREA(#542501); +#542501 = FILL_AREA_STYLE('',(#542502)); +#542502 = FILL_AREA_STYLE_COLOUR('',#510798); +#542503 = OVER_RIDING_STYLED_ITEM('overriding color',(#542504),#28793, + #540522); +#542504 = PRESENTATION_STYLE_ASSIGNMENT((#542505)); +#542505 = SURFACE_STYLE_USAGE(.BOTH.,#542506); +#542506 = SURFACE_SIDE_STYLE('',(#542507)); +#542507 = SURFACE_STYLE_FILL_AREA(#542508); +#542508 = FILL_AREA_STYLE('',(#542509)); +#542509 = FILL_AREA_STYLE_COLOUR('',#510798); +#542510 = OVER_RIDING_STYLED_ITEM('overriding color',(#542511),#28822, + #540522); +#542511 = PRESENTATION_STYLE_ASSIGNMENT((#542512)); +#542512 = SURFACE_STYLE_USAGE(.BOTH.,#542513); +#542513 = SURFACE_SIDE_STYLE('',(#542514)); +#542514 = SURFACE_STYLE_FILL_AREA(#542515); +#542515 = FILL_AREA_STYLE('',(#542516)); +#542516 = FILL_AREA_STYLE_COLOUR('',#510798); +#542517 = OVER_RIDING_STYLED_ITEM('overriding color',(#542518),#28851, + #540522); +#542518 = PRESENTATION_STYLE_ASSIGNMENT((#542519)); +#542519 = SURFACE_STYLE_USAGE(.BOTH.,#542520); +#542520 = SURFACE_SIDE_STYLE('',(#542521)); +#542521 = SURFACE_STYLE_FILL_AREA(#542522); +#542522 = FILL_AREA_STYLE('',(#542523)); +#542523 = FILL_AREA_STYLE_COLOUR('',#510798); +#542524 = OVER_RIDING_STYLED_ITEM('overriding color',(#542525),#28873, + #540522); +#542525 = PRESENTATION_STYLE_ASSIGNMENT((#542526)); +#542526 = SURFACE_STYLE_USAGE(.BOTH.,#542527); +#542527 = SURFACE_SIDE_STYLE('',(#542528)); +#542528 = SURFACE_STYLE_FILL_AREA(#542529); +#542529 = FILL_AREA_STYLE('',(#542530)); +#542530 = FILL_AREA_STYLE_COLOUR('',#510798); +#542531 = OVER_RIDING_STYLED_ITEM('overriding color',(#542532),#28902, + #540522); +#542532 = PRESENTATION_STYLE_ASSIGNMENT((#542533)); +#542533 = SURFACE_STYLE_USAGE(.BOTH.,#542534); +#542534 = SURFACE_SIDE_STYLE('',(#542535)); +#542535 = SURFACE_STYLE_FILL_AREA(#542536); +#542536 = FILL_AREA_STYLE('',(#542537)); +#542537 = FILL_AREA_STYLE_COLOUR('',#510798); +#542538 = OVER_RIDING_STYLED_ITEM('overriding color',(#542539),#28933, + #540522); +#542539 = PRESENTATION_STYLE_ASSIGNMENT((#542540)); +#542540 = SURFACE_STYLE_USAGE(.BOTH.,#542541); +#542541 = SURFACE_SIDE_STYLE('',(#542542)); +#542542 = SURFACE_STYLE_FILL_AREA(#542543); +#542543 = FILL_AREA_STYLE('',(#542544)); +#542544 = FILL_AREA_STYLE_COLOUR('',#510798); +#542545 = OVER_RIDING_STYLED_ITEM('overriding color',(#542546),#28957, + #540522); +#542546 = PRESENTATION_STYLE_ASSIGNMENT((#542547)); +#542547 = SURFACE_STYLE_USAGE(.BOTH.,#542548); +#542548 = SURFACE_SIDE_STYLE('',(#542549)); +#542549 = SURFACE_STYLE_FILL_AREA(#542550); +#542550 = FILL_AREA_STYLE('',(#542551)); +#542551 = FILL_AREA_STYLE_COLOUR('',#510798); +#542552 = OVER_RIDING_STYLED_ITEM('overriding color',(#542553),#28986, + #540522); +#542553 = PRESENTATION_STYLE_ASSIGNMENT((#542554)); +#542554 = SURFACE_STYLE_USAGE(.BOTH.,#542555); +#542555 = SURFACE_SIDE_STYLE('',(#542556)); +#542556 = SURFACE_STYLE_FILL_AREA(#542557); +#542557 = FILL_AREA_STYLE('',(#542558)); +#542558 = FILL_AREA_STYLE_COLOUR('',#510798); +#542559 = OVER_RIDING_STYLED_ITEM('overriding color',(#542560),#29010, + #540522); +#542560 = PRESENTATION_STYLE_ASSIGNMENT((#542561)); +#542561 = SURFACE_STYLE_USAGE(.BOTH.,#542562); +#542562 = SURFACE_SIDE_STYLE('',(#542563)); +#542563 = SURFACE_STYLE_FILL_AREA(#542564); +#542564 = FILL_AREA_STYLE('',(#542565)); +#542565 = FILL_AREA_STYLE_COLOUR('',#510798); +#542566 = OVER_RIDING_STYLED_ITEM('overriding color',(#542567),#29034, + #540522); +#542567 = PRESENTATION_STYLE_ASSIGNMENT((#542568)); +#542568 = SURFACE_STYLE_USAGE(.BOTH.,#542569); +#542569 = SURFACE_SIDE_STYLE('',(#542570)); +#542570 = SURFACE_STYLE_FILL_AREA(#542571); +#542571 = FILL_AREA_STYLE('',(#542572)); +#542572 = FILL_AREA_STYLE_COLOUR('',#510798); +#542573 = OVER_RIDING_STYLED_ITEM('overriding color',(#542574),#29058, + #540522); +#542574 = PRESENTATION_STYLE_ASSIGNMENT((#542575)); +#542575 = SURFACE_STYLE_USAGE(.BOTH.,#542576); +#542576 = SURFACE_SIDE_STYLE('',(#542577)); +#542577 = SURFACE_STYLE_FILL_AREA(#542578); +#542578 = FILL_AREA_STYLE('',(#542579)); +#542579 = FILL_AREA_STYLE_COLOUR('',#510798); +#542580 = OVER_RIDING_STYLED_ITEM('overriding color',(#542581),#29082, + #540522); +#542581 = PRESENTATION_STYLE_ASSIGNMENT((#542582)); +#542582 = SURFACE_STYLE_USAGE(.BOTH.,#542583); +#542583 = SURFACE_SIDE_STYLE('',(#542584)); +#542584 = SURFACE_STYLE_FILL_AREA(#542585); +#542585 = FILL_AREA_STYLE('',(#542586)); +#542586 = FILL_AREA_STYLE_COLOUR('',#510798); +#542587 = OVER_RIDING_STYLED_ITEM('overriding color',(#542588),#29106, + #540522); +#542588 = PRESENTATION_STYLE_ASSIGNMENT((#542589)); +#542589 = SURFACE_STYLE_USAGE(.BOTH.,#542590); +#542590 = SURFACE_SIDE_STYLE('',(#542591)); +#542591 = SURFACE_STYLE_FILL_AREA(#542592); +#542592 = FILL_AREA_STYLE('',(#542593)); +#542593 = FILL_AREA_STYLE_COLOUR('',#510798); +#542594 = OVER_RIDING_STYLED_ITEM('overriding color',(#542595),#29130, + #540522); +#542595 = PRESENTATION_STYLE_ASSIGNMENT((#542596)); +#542596 = SURFACE_STYLE_USAGE(.BOTH.,#542597); +#542597 = SURFACE_SIDE_STYLE('',(#542598)); +#542598 = SURFACE_STYLE_FILL_AREA(#542599); +#542599 = FILL_AREA_STYLE('',(#542600)); +#542600 = FILL_AREA_STYLE_COLOUR('',#510798); +#542601 = OVER_RIDING_STYLED_ITEM('overriding color',(#542602),#29159, + #540522); +#542602 = PRESENTATION_STYLE_ASSIGNMENT((#542603)); +#542603 = SURFACE_STYLE_USAGE(.BOTH.,#542604); +#542604 = SURFACE_SIDE_STYLE('',(#542605)); +#542605 = SURFACE_STYLE_FILL_AREA(#542606); +#542606 = FILL_AREA_STYLE('',(#542607)); +#542607 = FILL_AREA_STYLE_COLOUR('',#510798); +#542608 = OVER_RIDING_STYLED_ITEM('overriding color',(#542609),#29188, + #540522); +#542609 = PRESENTATION_STYLE_ASSIGNMENT((#542610)); +#542610 = SURFACE_STYLE_USAGE(.BOTH.,#542611); +#542611 = SURFACE_SIDE_STYLE('',(#542612)); +#542612 = SURFACE_STYLE_FILL_AREA(#542613); +#542613 = FILL_AREA_STYLE('',(#542614)); +#542614 = FILL_AREA_STYLE_COLOUR('',#510798); +#542615 = OVER_RIDING_STYLED_ITEM('overriding color',(#542616),#29212, + #540522); +#542616 = PRESENTATION_STYLE_ASSIGNMENT((#542617)); +#542617 = SURFACE_STYLE_USAGE(.BOTH.,#542618); +#542618 = SURFACE_SIDE_STYLE('',(#542619)); +#542619 = SURFACE_STYLE_FILL_AREA(#542620); +#542620 = FILL_AREA_STYLE('',(#542621)); +#542621 = FILL_AREA_STYLE_COLOUR('',#510798); +#542622 = OVER_RIDING_STYLED_ITEM('overriding color',(#542623),#29241, + #540522); +#542623 = PRESENTATION_STYLE_ASSIGNMENT((#542624)); +#542624 = SURFACE_STYLE_USAGE(.BOTH.,#542625); +#542625 = SURFACE_SIDE_STYLE('',(#542626)); +#542626 = SURFACE_STYLE_FILL_AREA(#542627); +#542627 = FILL_AREA_STYLE('',(#542628)); +#542628 = FILL_AREA_STYLE_COLOUR('',#510798); +#542629 = OVER_RIDING_STYLED_ITEM('overriding color',(#542630),#29270, + #540522); +#542630 = PRESENTATION_STYLE_ASSIGNMENT((#542631)); +#542631 = SURFACE_STYLE_USAGE(.BOTH.,#542632); +#542632 = SURFACE_SIDE_STYLE('',(#542633)); +#542633 = SURFACE_STYLE_FILL_AREA(#542634); +#542634 = FILL_AREA_STYLE('',(#542635)); +#542635 = FILL_AREA_STYLE_COLOUR('',#510798); +#542636 = OVER_RIDING_STYLED_ITEM('overriding color',(#542637),#29287, + #540522); +#542637 = PRESENTATION_STYLE_ASSIGNMENT((#542638)); +#542638 = SURFACE_STYLE_USAGE(.BOTH.,#542639); +#542639 = SURFACE_SIDE_STYLE('',(#542640)); +#542640 = SURFACE_STYLE_FILL_AREA(#542641); +#542641 = FILL_AREA_STYLE('',(#542642)); +#542642 = FILL_AREA_STYLE_COLOUR('',#510798); +#542643 = OVER_RIDING_STYLED_ITEM('overriding color',(#542644),#29310, + #540522); +#542644 = PRESENTATION_STYLE_ASSIGNMENT((#542645)); +#542645 = SURFACE_STYLE_USAGE(.BOTH.,#542646); +#542646 = SURFACE_SIDE_STYLE('',(#542647)); +#542647 = SURFACE_STYLE_FILL_AREA(#542648); +#542648 = FILL_AREA_STYLE('',(#542649)); +#542649 = FILL_AREA_STYLE_COLOUR('',#510798); +#542650 = OVER_RIDING_STYLED_ITEM('overriding color',(#542651),#29341, + #540522); +#542651 = PRESENTATION_STYLE_ASSIGNMENT((#542652)); +#542652 = SURFACE_STYLE_USAGE(.BOTH.,#542653); +#542653 = SURFACE_SIDE_STYLE('',(#542654)); +#542654 = SURFACE_STYLE_FILL_AREA(#542655); +#542655 = FILL_AREA_STYLE('',(#542656)); +#542656 = FILL_AREA_STYLE_COLOUR('',#510798); +#542657 = OVER_RIDING_STYLED_ITEM('overriding color',(#542658),#29365, + #540522); +#542658 = PRESENTATION_STYLE_ASSIGNMENT((#542659)); +#542659 = SURFACE_STYLE_USAGE(.BOTH.,#542660); +#542660 = SURFACE_SIDE_STYLE('',(#542661)); +#542661 = SURFACE_STYLE_FILL_AREA(#542662); +#542662 = FILL_AREA_STYLE('',(#542663)); +#542663 = FILL_AREA_STYLE_COLOUR('',#510798); +#542664 = OVER_RIDING_STYLED_ITEM('overriding color',(#542665),#29389, + #540522); +#542665 = PRESENTATION_STYLE_ASSIGNMENT((#542666)); +#542666 = SURFACE_STYLE_USAGE(.BOTH.,#542667); +#542667 = SURFACE_SIDE_STYLE('',(#542668)); +#542668 = SURFACE_STYLE_FILL_AREA(#542669); +#542669 = FILL_AREA_STYLE('',(#542670)); +#542670 = FILL_AREA_STYLE_COLOUR('',#510798); +#542671 = OVER_RIDING_STYLED_ITEM('overriding color',(#542672),#29413, + #540522); +#542672 = PRESENTATION_STYLE_ASSIGNMENT((#542673)); +#542673 = SURFACE_STYLE_USAGE(.BOTH.,#542674); +#542674 = SURFACE_SIDE_STYLE('',(#542675)); +#542675 = SURFACE_STYLE_FILL_AREA(#542676); +#542676 = FILL_AREA_STYLE('',(#542677)); +#542677 = FILL_AREA_STYLE_COLOUR('',#510798); +#542678 = OVER_RIDING_STYLED_ITEM('overriding color',(#542679),#29437, + #540522); +#542679 = PRESENTATION_STYLE_ASSIGNMENT((#542680)); +#542680 = SURFACE_STYLE_USAGE(.BOTH.,#542681); +#542681 = SURFACE_SIDE_STYLE('',(#542682)); +#542682 = SURFACE_STYLE_FILL_AREA(#542683); +#542683 = FILL_AREA_STYLE('',(#542684)); +#542684 = FILL_AREA_STYLE_COLOUR('',#510798); +#542685 = OVER_RIDING_STYLED_ITEM('overriding color',(#542686),#29461, + #540522); +#542686 = PRESENTATION_STYLE_ASSIGNMENT((#542687)); +#542687 = SURFACE_STYLE_USAGE(.BOTH.,#542688); +#542688 = SURFACE_SIDE_STYLE('',(#542689)); +#542689 = SURFACE_STYLE_FILL_AREA(#542690); +#542690 = FILL_AREA_STYLE('',(#542691)); +#542691 = FILL_AREA_STYLE_COLOUR('',#510798); +#542692 = OVER_RIDING_STYLED_ITEM('overriding color',(#542693),#29485, + #540522); +#542693 = PRESENTATION_STYLE_ASSIGNMENT((#542694)); +#542694 = SURFACE_STYLE_USAGE(.BOTH.,#542695); +#542695 = SURFACE_SIDE_STYLE('',(#542696)); +#542696 = SURFACE_STYLE_FILL_AREA(#542697); +#542697 = FILL_AREA_STYLE('',(#542698)); +#542698 = FILL_AREA_STYLE_COLOUR('',#510798); +#542699 = OVER_RIDING_STYLED_ITEM('overriding color',(#542700),#29509, + #540522); +#542700 = PRESENTATION_STYLE_ASSIGNMENT((#542701)); +#542701 = SURFACE_STYLE_USAGE(.BOTH.,#542702); +#542702 = SURFACE_SIDE_STYLE('',(#542703)); +#542703 = SURFACE_STYLE_FILL_AREA(#542704); +#542704 = FILL_AREA_STYLE('',(#542705)); +#542705 = FILL_AREA_STYLE_COLOUR('',#510798); +#542706 = OVER_RIDING_STYLED_ITEM('overriding color',(#542707),#29533, + #540522); +#542707 = PRESENTATION_STYLE_ASSIGNMENT((#542708)); +#542708 = SURFACE_STYLE_USAGE(.BOTH.,#542709); +#542709 = SURFACE_SIDE_STYLE('',(#542710)); +#542710 = SURFACE_STYLE_FILL_AREA(#542711); +#542711 = FILL_AREA_STYLE('',(#542712)); +#542712 = FILL_AREA_STYLE_COLOUR('',#510798); +#542713 = OVER_RIDING_STYLED_ITEM('overriding color',(#542714),#29557, + #540522); +#542714 = PRESENTATION_STYLE_ASSIGNMENT((#542715)); +#542715 = SURFACE_STYLE_USAGE(.BOTH.,#542716); +#542716 = SURFACE_SIDE_STYLE('',(#542717)); +#542717 = SURFACE_STYLE_FILL_AREA(#542718); +#542718 = FILL_AREA_STYLE('',(#542719)); +#542719 = FILL_AREA_STYLE_COLOUR('',#510798); +#542720 = OVER_RIDING_STYLED_ITEM('overriding color',(#542721),#29581, + #540522); +#542721 = PRESENTATION_STYLE_ASSIGNMENT((#542722)); +#542722 = SURFACE_STYLE_USAGE(.BOTH.,#542723); +#542723 = SURFACE_SIDE_STYLE('',(#542724)); +#542724 = SURFACE_STYLE_FILL_AREA(#542725); +#542725 = FILL_AREA_STYLE('',(#542726)); +#542726 = FILL_AREA_STYLE_COLOUR('',#510798); +#542727 = OVER_RIDING_STYLED_ITEM('overriding color',(#542728),#29598, + #540522); +#542728 = PRESENTATION_STYLE_ASSIGNMENT((#542729)); +#542729 = SURFACE_STYLE_USAGE(.BOTH.,#542730); +#542730 = SURFACE_SIDE_STYLE('',(#542731)); +#542731 = SURFACE_STYLE_FILL_AREA(#542732); +#542732 = FILL_AREA_STYLE('',(#542733)); +#542733 = FILL_AREA_STYLE_COLOUR('',#510798); +#542734 = OVER_RIDING_STYLED_ITEM('overriding color',(#542735),#29618, + #540522); +#542735 = PRESENTATION_STYLE_ASSIGNMENT((#542736)); +#542736 = SURFACE_STYLE_USAGE(.BOTH.,#542737); +#542737 = SURFACE_SIDE_STYLE('',(#542738)); +#542738 = SURFACE_STYLE_FILL_AREA(#542739); +#542739 = FILL_AREA_STYLE('',(#542740)); +#542740 = FILL_AREA_STYLE_COLOUR('',#510798); +#542741 = OVER_RIDING_STYLED_ITEM('overriding color',(#542742),#29748, + #540522); +#542742 = PRESENTATION_STYLE_ASSIGNMENT((#542743)); +#542743 = SURFACE_STYLE_USAGE(.BOTH.,#542744); +#542744 = SURFACE_SIDE_STYLE('',(#542745)); +#542745 = SURFACE_STYLE_FILL_AREA(#542746); +#542746 = FILL_AREA_STYLE('',(#542747)); +#542747 = FILL_AREA_STYLE_COLOUR('',#510798); +#542748 = OVER_RIDING_STYLED_ITEM('overriding color',(#542749),#29770, + #540522); +#542749 = PRESENTATION_STYLE_ASSIGNMENT((#542750)); +#542750 = SURFACE_STYLE_USAGE(.BOTH.,#542751); +#542751 = SURFACE_SIDE_STYLE('',(#542752)); +#542752 = SURFACE_STYLE_FILL_AREA(#542753); +#542753 = FILL_AREA_STYLE('',(#542754)); +#542754 = FILL_AREA_STYLE_COLOUR('',#510798); +#542755 = OVER_RIDING_STYLED_ITEM('overriding color',(#542756),#29791, + #540522); +#542756 = PRESENTATION_STYLE_ASSIGNMENT((#542757)); +#542757 = SURFACE_STYLE_USAGE(.BOTH.,#542758); +#542758 = SURFACE_SIDE_STYLE('',(#542759)); +#542759 = SURFACE_STYLE_FILL_AREA(#542760); +#542760 = FILL_AREA_STYLE('',(#542761)); +#542761 = FILL_AREA_STYLE_COLOUR('',#510798); +#542762 = OVER_RIDING_STYLED_ITEM('overriding color',(#542763),#29812, + #540522); +#542763 = PRESENTATION_STYLE_ASSIGNMENT((#542764)); +#542764 = SURFACE_STYLE_USAGE(.BOTH.,#542765); +#542765 = SURFACE_SIDE_STYLE('',(#542766)); +#542766 = SURFACE_STYLE_FILL_AREA(#542767); +#542767 = FILL_AREA_STYLE('',(#542768)); +#542768 = FILL_AREA_STYLE_COLOUR('',#510798); +#542769 = OVER_RIDING_STYLED_ITEM('overriding color',(#542770),#29833, + #540522); +#542770 = PRESENTATION_STYLE_ASSIGNMENT((#542771)); +#542771 = SURFACE_STYLE_USAGE(.BOTH.,#542772); +#542772 = SURFACE_SIDE_STYLE('',(#542773)); +#542773 = SURFACE_STYLE_FILL_AREA(#542774); +#542774 = FILL_AREA_STYLE('',(#542775)); +#542775 = FILL_AREA_STYLE_COLOUR('',#510798); +#542776 = OVER_RIDING_STYLED_ITEM('overriding color',(#542777),#29854, + #540522); +#542777 = PRESENTATION_STYLE_ASSIGNMENT((#542778)); +#542778 = SURFACE_STYLE_USAGE(.BOTH.,#542779); +#542779 = SURFACE_SIDE_STYLE('',(#542780)); +#542780 = SURFACE_STYLE_FILL_AREA(#542781); +#542781 = FILL_AREA_STYLE('',(#542782)); +#542782 = FILL_AREA_STYLE_COLOUR('',#510798); +#542783 = OVER_RIDING_STYLED_ITEM('overriding color',(#542784),#29871, + #540522); +#542784 = PRESENTATION_STYLE_ASSIGNMENT((#542785)); +#542785 = SURFACE_STYLE_USAGE(.BOTH.,#542786); +#542786 = SURFACE_SIDE_STYLE('',(#542787)); +#542787 = SURFACE_STYLE_FILL_AREA(#542788); +#542788 = FILL_AREA_STYLE('',(#542789)); +#542789 = FILL_AREA_STYLE_COLOUR('',#510798); +#542790 = OVER_RIDING_STYLED_ITEM('overriding color',(#542791),#29883, + #540522); +#542791 = PRESENTATION_STYLE_ASSIGNMENT((#542792)); +#542792 = SURFACE_STYLE_USAGE(.BOTH.,#542793); +#542793 = SURFACE_SIDE_STYLE('',(#542794)); +#542794 = SURFACE_STYLE_FILL_AREA(#542795); +#542795 = FILL_AREA_STYLE('',(#542796)); +#542796 = FILL_AREA_STYLE_COLOUR('',#510798); +#542797 = OVER_RIDING_STYLED_ITEM('overriding color',(#542798),#29914, + #540522); +#542798 = PRESENTATION_STYLE_ASSIGNMENT((#542799)); +#542799 = SURFACE_STYLE_USAGE(.BOTH.,#542800); +#542800 = SURFACE_SIDE_STYLE('',(#542801)); +#542801 = SURFACE_STYLE_FILL_AREA(#542802); +#542802 = FILL_AREA_STYLE('',(#542803)); +#542803 = FILL_AREA_STYLE_COLOUR('',#510798); +#542804 = OVER_RIDING_STYLED_ITEM('overriding color',(#542805),#29938, + #540522); +#542805 = PRESENTATION_STYLE_ASSIGNMENT((#542806)); +#542806 = SURFACE_STYLE_USAGE(.BOTH.,#542807); +#542807 = SURFACE_SIDE_STYLE('',(#542808)); +#542808 = SURFACE_STYLE_FILL_AREA(#542809); +#542809 = FILL_AREA_STYLE('',(#542810)); +#542810 = FILL_AREA_STYLE_COLOUR('',#510798); +#542811 = OVER_RIDING_STYLED_ITEM('overriding color',(#542812),#29962, + #540522); +#542812 = PRESENTATION_STYLE_ASSIGNMENT((#542813)); +#542813 = SURFACE_STYLE_USAGE(.BOTH.,#542814); +#542814 = SURFACE_SIDE_STYLE('',(#542815)); +#542815 = SURFACE_STYLE_FILL_AREA(#542816); +#542816 = FILL_AREA_STYLE('',(#542817)); +#542817 = FILL_AREA_STYLE_COLOUR('',#510798); +#542818 = OVER_RIDING_STYLED_ITEM('overriding color',(#542819),#29991, + #540522); +#542819 = PRESENTATION_STYLE_ASSIGNMENT((#542820)); +#542820 = SURFACE_STYLE_USAGE(.BOTH.,#542821); +#542821 = SURFACE_SIDE_STYLE('',(#542822)); +#542822 = SURFACE_STYLE_FILL_AREA(#542823); +#542823 = FILL_AREA_STYLE('',(#542824)); +#542824 = FILL_AREA_STYLE_COLOUR('',#510798); +#542825 = OVER_RIDING_STYLED_ITEM('overriding color',(#542826),#30020, + #540522); +#542826 = PRESENTATION_STYLE_ASSIGNMENT((#542827)); +#542827 = SURFACE_STYLE_USAGE(.BOTH.,#542828); +#542828 = SURFACE_SIDE_STYLE('',(#542829)); +#542829 = SURFACE_STYLE_FILL_AREA(#542830); +#542830 = FILL_AREA_STYLE('',(#542831)); +#542831 = FILL_AREA_STYLE_COLOUR('',#510798); +#542832 = OVER_RIDING_STYLED_ITEM('overriding color',(#542833),#30049, + #540522); +#542833 = PRESENTATION_STYLE_ASSIGNMENT((#542834)); +#542834 = SURFACE_STYLE_USAGE(.BOTH.,#542835); +#542835 = SURFACE_SIDE_STYLE('',(#542836)); +#542836 = SURFACE_STYLE_FILL_AREA(#542837); +#542837 = FILL_AREA_STYLE('',(#542838)); +#542838 = FILL_AREA_STYLE_COLOUR('',#510798); +#542839 = OVER_RIDING_STYLED_ITEM('overriding color',(#542840),#30071, + #540522); +#542840 = PRESENTATION_STYLE_ASSIGNMENT((#542841)); +#542841 = SURFACE_STYLE_USAGE(.BOTH.,#542842); +#542842 = SURFACE_SIDE_STYLE('',(#542843)); +#542843 = SURFACE_STYLE_FILL_AREA(#542844); +#542844 = FILL_AREA_STYLE('',(#542845)); +#542845 = FILL_AREA_STYLE_COLOUR('',#506700); +#542846 = OVER_RIDING_STYLED_ITEM('overriding color',(#542847),#30086, + #540522); +#542847 = PRESENTATION_STYLE_ASSIGNMENT((#542848)); +#542848 = SURFACE_STYLE_USAGE(.BOTH.,#542849); +#542849 = SURFACE_SIDE_STYLE('',(#542850)); +#542850 = SURFACE_STYLE_FILL_AREA(#542851); +#542851 = FILL_AREA_STYLE('',(#542852)); +#542852 = FILL_AREA_STYLE_COLOUR('',#510798); +#542853 = OVER_RIDING_STYLED_ITEM('overriding color',(#542854),#30210, + #540522); +#542854 = PRESENTATION_STYLE_ASSIGNMENT((#542855)); +#542855 = SURFACE_STYLE_USAGE(.BOTH.,#542856); +#542856 = SURFACE_SIDE_STYLE('',(#542857)); +#542857 = SURFACE_STYLE_FILL_AREA(#542858); +#542858 = FILL_AREA_STYLE('',(#542859)); +#542859 = FILL_AREA_STYLE_COLOUR('',#510798); +#542860 = OVER_RIDING_STYLED_ITEM('overriding color',(#542861),#30232, + #540522); +#542861 = PRESENTATION_STYLE_ASSIGNMENT((#542862)); +#542862 = SURFACE_STYLE_USAGE(.BOTH.,#542863); +#542863 = SURFACE_SIDE_STYLE('',(#542864)); +#542864 = SURFACE_STYLE_FILL_AREA(#542865); +#542865 = FILL_AREA_STYLE('',(#542866)); +#542866 = FILL_AREA_STYLE_COLOUR('',#510798); +#542867 = OVER_RIDING_STYLED_ITEM('overriding color',(#542868),#30249, + #540522); +#542868 = PRESENTATION_STYLE_ASSIGNMENT((#542869)); +#542869 = SURFACE_STYLE_USAGE(.BOTH.,#542870); +#542870 = SURFACE_SIDE_STYLE('',(#542871)); +#542871 = SURFACE_STYLE_FILL_AREA(#542872); +#542872 = FILL_AREA_STYLE('',(#542873)); +#542873 = FILL_AREA_STYLE_COLOUR('',#510798); +#542874 = OVER_RIDING_STYLED_ITEM('overriding color',(#542875),#30266, + #540522); +#542875 = PRESENTATION_STYLE_ASSIGNMENT((#542876)); +#542876 = SURFACE_STYLE_USAGE(.BOTH.,#542877); +#542877 = SURFACE_SIDE_STYLE('',(#542878)); +#542878 = SURFACE_STYLE_FILL_AREA(#542879); +#542879 = FILL_AREA_STYLE('',(#542880)); +#542880 = FILL_AREA_STYLE_COLOUR('',#510798); +#542881 = OVER_RIDING_STYLED_ITEM('overriding color',(#542882),#30283, + #540522); +#542882 = PRESENTATION_STYLE_ASSIGNMENT((#542883)); +#542883 = SURFACE_STYLE_USAGE(.BOTH.,#542884); +#542884 = SURFACE_SIDE_STYLE('',(#542885)); +#542885 = SURFACE_STYLE_FILL_AREA(#542886); +#542886 = FILL_AREA_STYLE('',(#542887)); +#542887 = FILL_AREA_STYLE_COLOUR('',#510798); +#542888 = OVER_RIDING_STYLED_ITEM('overriding color',(#542889),#30300, + #540522); +#542889 = PRESENTATION_STYLE_ASSIGNMENT((#542890)); +#542890 = SURFACE_STYLE_USAGE(.BOTH.,#542891); +#542891 = SURFACE_SIDE_STYLE('',(#542892)); +#542892 = SURFACE_STYLE_FILL_AREA(#542893); +#542893 = FILL_AREA_STYLE('',(#542894)); +#542894 = FILL_AREA_STYLE_COLOUR('',#510798); +#542895 = OVER_RIDING_STYLED_ITEM('overriding color',(#542896),#30317, + #540522); +#542896 = PRESENTATION_STYLE_ASSIGNMENT((#542897)); +#542897 = SURFACE_STYLE_USAGE(.BOTH.,#542898); +#542898 = SURFACE_SIDE_STYLE('',(#542899)); +#542899 = SURFACE_STYLE_FILL_AREA(#542900); +#542900 = FILL_AREA_STYLE('',(#542901)); +#542901 = FILL_AREA_STYLE_COLOUR('',#510798); +#542902 = OVER_RIDING_STYLED_ITEM('overriding color',(#542903),#30334, + #540522); +#542903 = PRESENTATION_STYLE_ASSIGNMENT((#542904)); +#542904 = SURFACE_STYLE_USAGE(.BOTH.,#542905); +#542905 = SURFACE_SIDE_STYLE('',(#542906)); +#542906 = SURFACE_STYLE_FILL_AREA(#542907); +#542907 = FILL_AREA_STYLE('',(#542908)); +#542908 = FILL_AREA_STYLE_COLOUR('',#510798); +#542909 = OVER_RIDING_STYLED_ITEM('overriding color',(#542910),#30346, + #540522); +#542910 = PRESENTATION_STYLE_ASSIGNMENT((#542911)); +#542911 = SURFACE_STYLE_USAGE(.BOTH.,#542912); +#542912 = SURFACE_SIDE_STYLE('',(#542913)); +#542913 = SURFACE_STYLE_FILL_AREA(#542914); +#542914 = FILL_AREA_STYLE('',(#542915)); +#542915 = FILL_AREA_STYLE_COLOUR('',#510798); +#542916 = OVER_RIDING_STYLED_ITEM('overriding color',(#542917),#30377, + #540522); +#542917 = PRESENTATION_STYLE_ASSIGNMENT((#542918)); +#542918 = SURFACE_STYLE_USAGE(.BOTH.,#542919); +#542919 = SURFACE_SIDE_STYLE('',(#542920)); +#542920 = SURFACE_STYLE_FILL_AREA(#542921); +#542921 = FILL_AREA_STYLE('',(#542922)); +#542922 = FILL_AREA_STYLE_COLOUR('',#510798); +#542923 = OVER_RIDING_STYLED_ITEM('overriding color',(#542924),#30401, + #540522); +#542924 = PRESENTATION_STYLE_ASSIGNMENT((#542925)); +#542925 = SURFACE_STYLE_USAGE(.BOTH.,#542926); +#542926 = SURFACE_SIDE_STYLE('',(#542927)); +#542927 = SURFACE_STYLE_FILL_AREA(#542928); +#542928 = FILL_AREA_STYLE('',(#542929)); +#542929 = FILL_AREA_STYLE_COLOUR('',#510798); +#542930 = OVER_RIDING_STYLED_ITEM('overriding color',(#542931),#30430, + #540522); +#542931 = PRESENTATION_STYLE_ASSIGNMENT((#542932)); +#542932 = SURFACE_STYLE_USAGE(.BOTH.,#542933); +#542933 = SURFACE_SIDE_STYLE('',(#542934)); +#542934 = SURFACE_STYLE_FILL_AREA(#542935); +#542935 = FILL_AREA_STYLE('',(#542936)); +#542936 = FILL_AREA_STYLE_COLOUR('',#510798); +#542937 = OVER_RIDING_STYLED_ITEM('overriding color',(#542938),#30454, + #540522); +#542938 = PRESENTATION_STYLE_ASSIGNMENT((#542939)); +#542939 = SURFACE_STYLE_USAGE(.BOTH.,#542940); +#542940 = SURFACE_SIDE_STYLE('',(#542941)); +#542941 = SURFACE_STYLE_FILL_AREA(#542942); +#542942 = FILL_AREA_STYLE('',(#542943)); +#542943 = FILL_AREA_STYLE_COLOUR('',#510798); +#542944 = OVER_RIDING_STYLED_ITEM('overriding color',(#542945),#30483, + #540522); +#542945 = PRESENTATION_STYLE_ASSIGNMENT((#542946)); +#542946 = SURFACE_STYLE_USAGE(.BOTH.,#542947); +#542947 = SURFACE_SIDE_STYLE('',(#542948)); +#542948 = SURFACE_STYLE_FILL_AREA(#542949); +#542949 = FILL_AREA_STYLE('',(#542950)); +#542950 = FILL_AREA_STYLE_COLOUR('',#510798); +#542951 = OVER_RIDING_STYLED_ITEM('overriding color',(#542952),#30500, + #540522); +#542952 = PRESENTATION_STYLE_ASSIGNMENT((#542953)); +#542953 = SURFACE_STYLE_USAGE(.BOTH.,#542954); +#542954 = SURFACE_SIDE_STYLE('',(#542955)); +#542955 = SURFACE_STYLE_FILL_AREA(#542956); +#542956 = FILL_AREA_STYLE('',(#542957)); +#542957 = FILL_AREA_STYLE_COLOUR('',#506700); +#542958 = OVER_RIDING_STYLED_ITEM('overriding color',(#542959),#30514, + #540522); +#542959 = PRESENTATION_STYLE_ASSIGNMENT((#542960)); +#542960 = SURFACE_STYLE_USAGE(.BOTH.,#542961); +#542961 = SURFACE_SIDE_STYLE('',(#542962)); +#542962 = SURFACE_STYLE_FILL_AREA(#542963); +#542963 = FILL_AREA_STYLE('',(#542964)); +#542964 = FILL_AREA_STYLE_COLOUR('',#510798); +#542965 = OVER_RIDING_STYLED_ITEM('overriding color',(#542966),#30839, + #540522); +#542966 = PRESENTATION_STYLE_ASSIGNMENT((#542967)); +#542967 = SURFACE_STYLE_USAGE(.BOTH.,#542968); +#542968 = SURFACE_SIDE_STYLE('',(#542969)); +#542969 = SURFACE_STYLE_FILL_AREA(#542970); +#542970 = FILL_AREA_STYLE('',(#542971)); +#542971 = FILL_AREA_STYLE_COLOUR('',#510798); +#542972 = OVER_RIDING_STYLED_ITEM('overriding color',(#542973),#30865, + #540522); +#542973 = PRESENTATION_STYLE_ASSIGNMENT((#542974)); +#542974 = SURFACE_STYLE_USAGE(.BOTH.,#542975); +#542975 = SURFACE_SIDE_STYLE('',(#542976)); +#542976 = SURFACE_STYLE_FILL_AREA(#542977); +#542977 = FILL_AREA_STYLE('',(#542978)); +#542978 = FILL_AREA_STYLE_COLOUR('',#510798); +#542979 = OVER_RIDING_STYLED_ITEM('overriding color',(#542980),#30886, + #540522); +#542980 = PRESENTATION_STYLE_ASSIGNMENT((#542981)); +#542981 = SURFACE_STYLE_USAGE(.BOTH.,#542982); +#542982 = SURFACE_SIDE_STYLE('',(#542983)); +#542983 = SURFACE_STYLE_FILL_AREA(#542984); +#542984 = FILL_AREA_STYLE('',(#542985)); +#542985 = FILL_AREA_STYLE_COLOUR('',#510798); +#542986 = OVER_RIDING_STYLED_ITEM('overriding color',(#542987),#30907, + #540522); +#542987 = PRESENTATION_STYLE_ASSIGNMENT((#542988)); +#542988 = SURFACE_STYLE_USAGE(.BOTH.,#542989); +#542989 = SURFACE_SIDE_STYLE('',(#542990)); +#542990 = SURFACE_STYLE_FILL_AREA(#542991); +#542991 = FILL_AREA_STYLE('',(#542992)); +#542992 = FILL_AREA_STYLE_COLOUR('',#510798); +#542993 = OVER_RIDING_STYLED_ITEM('overriding color',(#542994),#30928, + #540522); +#542994 = PRESENTATION_STYLE_ASSIGNMENT((#542995)); +#542995 = SURFACE_STYLE_USAGE(.BOTH.,#542996); +#542996 = SURFACE_SIDE_STYLE('',(#542997)); +#542997 = SURFACE_STYLE_FILL_AREA(#542998); +#542998 = FILL_AREA_STYLE('',(#542999)); +#542999 = FILL_AREA_STYLE_COLOUR('',#510798); +#543000 = OVER_RIDING_STYLED_ITEM('overriding color',(#543001),#30949, + #540522); +#543001 = PRESENTATION_STYLE_ASSIGNMENT((#543002)); +#543002 = SURFACE_STYLE_USAGE(.BOTH.,#543003); +#543003 = SURFACE_SIDE_STYLE('',(#543004)); +#543004 = SURFACE_STYLE_FILL_AREA(#543005); +#543005 = FILL_AREA_STYLE('',(#543006)); +#543006 = FILL_AREA_STYLE_COLOUR('',#510798); +#543007 = OVER_RIDING_STYLED_ITEM('overriding color',(#543008),#30970, + #540522); +#543008 = PRESENTATION_STYLE_ASSIGNMENT((#543009)); +#543009 = SURFACE_STYLE_USAGE(.BOTH.,#543010); +#543010 = SURFACE_SIDE_STYLE('',(#543011)); +#543011 = SURFACE_STYLE_FILL_AREA(#543012); +#543012 = FILL_AREA_STYLE('',(#543013)); +#543013 = FILL_AREA_STYLE_COLOUR('',#510798); +#543014 = OVER_RIDING_STYLED_ITEM('overriding color',(#543015),#30991, + #540522); +#543015 = PRESENTATION_STYLE_ASSIGNMENT((#543016)); +#543016 = SURFACE_STYLE_USAGE(.BOTH.,#543017); +#543017 = SURFACE_SIDE_STYLE('',(#543018)); +#543018 = SURFACE_STYLE_FILL_AREA(#543019); +#543019 = FILL_AREA_STYLE('',(#543020)); +#543020 = FILL_AREA_STYLE_COLOUR('',#510798); +#543021 = OVER_RIDING_STYLED_ITEM('overriding color',(#543022),#31012, + #540522); +#543022 = PRESENTATION_STYLE_ASSIGNMENT((#543023)); +#543023 = SURFACE_STYLE_USAGE(.BOTH.,#543024); +#543024 = SURFACE_SIDE_STYLE('',(#543025)); +#543025 = SURFACE_STYLE_FILL_AREA(#543026); +#543026 = FILL_AREA_STYLE('',(#543027)); +#543027 = FILL_AREA_STYLE_COLOUR('',#510798); +#543028 = OVER_RIDING_STYLED_ITEM('overriding color',(#543029),#31033, + #540522); +#543029 = PRESENTATION_STYLE_ASSIGNMENT((#543030)); +#543030 = SURFACE_STYLE_USAGE(.BOTH.,#543031); +#543031 = SURFACE_SIDE_STYLE('',(#543032)); +#543032 = SURFACE_STYLE_FILL_AREA(#543033); +#543033 = FILL_AREA_STYLE('',(#543034)); +#543034 = FILL_AREA_STYLE_COLOUR('',#510798); +#543035 = OVER_RIDING_STYLED_ITEM('overriding color',(#543036),#31054, + #540522); +#543036 = PRESENTATION_STYLE_ASSIGNMENT((#543037)); +#543037 = SURFACE_STYLE_USAGE(.BOTH.,#543038); +#543038 = SURFACE_SIDE_STYLE('',(#543039)); +#543039 = SURFACE_STYLE_FILL_AREA(#543040); +#543040 = FILL_AREA_STYLE('',(#543041)); +#543041 = FILL_AREA_STYLE_COLOUR('',#510798); +#543042 = OVER_RIDING_STYLED_ITEM('overriding color',(#543043),#31075, + #540522); +#543043 = PRESENTATION_STYLE_ASSIGNMENT((#543044)); +#543044 = SURFACE_STYLE_USAGE(.BOTH.,#543045); +#543045 = SURFACE_SIDE_STYLE('',(#543046)); +#543046 = SURFACE_STYLE_FILL_AREA(#543047); +#543047 = FILL_AREA_STYLE('',(#543048)); +#543048 = FILL_AREA_STYLE_COLOUR('',#510798); +#543049 = OVER_RIDING_STYLED_ITEM('overriding color',(#543050),#31096, + #540522); +#543050 = PRESENTATION_STYLE_ASSIGNMENT((#543051)); +#543051 = SURFACE_STYLE_USAGE(.BOTH.,#543052); +#543052 = SURFACE_SIDE_STYLE('',(#543053)); +#543053 = SURFACE_STYLE_FILL_AREA(#543054); +#543054 = FILL_AREA_STYLE('',(#543055)); +#543055 = FILL_AREA_STYLE_COLOUR('',#510798); +#543056 = OVER_RIDING_STYLED_ITEM('overriding color',(#543057),#31113, + #540522); +#543057 = PRESENTATION_STYLE_ASSIGNMENT((#543058)); +#543058 = SURFACE_STYLE_USAGE(.BOTH.,#543059); +#543059 = SURFACE_SIDE_STYLE('',(#543060)); +#543060 = SURFACE_STYLE_FILL_AREA(#543061); +#543061 = FILL_AREA_STYLE('',(#543062)); +#543062 = FILL_AREA_STYLE_COLOUR('',#510798); +#543063 = OVER_RIDING_STYLED_ITEM('overriding color',(#543064),#31130, + #540522); +#543064 = PRESENTATION_STYLE_ASSIGNMENT((#543065)); +#543065 = SURFACE_STYLE_USAGE(.BOTH.,#543066); +#543066 = SURFACE_SIDE_STYLE('',(#543067)); +#543067 = SURFACE_STYLE_FILL_AREA(#543068); +#543068 = FILL_AREA_STYLE('',(#543069)); +#543069 = FILL_AREA_STYLE_COLOUR('',#510798); +#543070 = OVER_RIDING_STYLED_ITEM('overriding color',(#543071),#31147, + #540522); +#543071 = PRESENTATION_STYLE_ASSIGNMENT((#543072)); +#543072 = SURFACE_STYLE_USAGE(.BOTH.,#543073); +#543073 = SURFACE_SIDE_STYLE('',(#543074)); +#543074 = SURFACE_STYLE_FILL_AREA(#543075); +#543075 = FILL_AREA_STYLE('',(#543076)); +#543076 = FILL_AREA_STYLE_COLOUR('',#510798); +#543077 = OVER_RIDING_STYLED_ITEM('overriding color',(#543078),#31164, + #540522); +#543078 = PRESENTATION_STYLE_ASSIGNMENT((#543079)); +#543079 = SURFACE_STYLE_USAGE(.BOTH.,#543080); +#543080 = SURFACE_SIDE_STYLE('',(#543081)); +#543081 = SURFACE_STYLE_FILL_AREA(#543082); +#543082 = FILL_AREA_STYLE('',(#543083)); +#543083 = FILL_AREA_STYLE_COLOUR('',#510798); +#543084 = OVER_RIDING_STYLED_ITEM('overriding color',(#543085),#31185, + #540522); +#543085 = PRESENTATION_STYLE_ASSIGNMENT((#543086)); +#543086 = SURFACE_STYLE_USAGE(.BOTH.,#543087); +#543087 = SURFACE_SIDE_STYLE('',(#543088)); +#543088 = SURFACE_STYLE_FILL_AREA(#543089); +#543089 = FILL_AREA_STYLE('',(#543090)); +#543090 = FILL_AREA_STYLE_COLOUR('',#510798); +#543091 = OVER_RIDING_STYLED_ITEM('overriding color',(#543092),#31206, + #540522); +#543092 = PRESENTATION_STYLE_ASSIGNMENT((#543093)); +#543093 = SURFACE_STYLE_USAGE(.BOTH.,#543094); +#543094 = SURFACE_SIDE_STYLE('',(#543095)); +#543095 = SURFACE_STYLE_FILL_AREA(#543096); +#543096 = FILL_AREA_STYLE('',(#543097)); +#543097 = FILL_AREA_STYLE_COLOUR('',#510798); +#543098 = OVER_RIDING_STYLED_ITEM('overriding color',(#543099),#31227, + #540522); +#543099 = PRESENTATION_STYLE_ASSIGNMENT((#543100)); +#543100 = SURFACE_STYLE_USAGE(.BOTH.,#543101); +#543101 = SURFACE_SIDE_STYLE('',(#543102)); +#543102 = SURFACE_STYLE_FILL_AREA(#543103); +#543103 = FILL_AREA_STYLE('',(#543104)); +#543104 = FILL_AREA_STYLE_COLOUR('',#510798); +#543105 = OVER_RIDING_STYLED_ITEM('overriding color',(#543106),#31248, + #540522); +#543106 = PRESENTATION_STYLE_ASSIGNMENT((#543107)); +#543107 = SURFACE_STYLE_USAGE(.BOTH.,#543108); +#543108 = SURFACE_SIDE_STYLE('',(#543109)); +#543109 = SURFACE_STYLE_FILL_AREA(#543110); +#543110 = FILL_AREA_STYLE('',(#543111)); +#543111 = FILL_AREA_STYLE_COLOUR('',#510798); +#543112 = OVER_RIDING_STYLED_ITEM('overriding color',(#543113),#31269, + #540522); +#543113 = PRESENTATION_STYLE_ASSIGNMENT((#543114)); +#543114 = SURFACE_STYLE_USAGE(.BOTH.,#543115); +#543115 = SURFACE_SIDE_STYLE('',(#543116)); +#543116 = SURFACE_STYLE_FILL_AREA(#543117); +#543117 = FILL_AREA_STYLE('',(#543118)); +#543118 = FILL_AREA_STYLE_COLOUR('',#510798); +#543119 = OVER_RIDING_STYLED_ITEM('overriding color',(#543120),#31290, + #540522); +#543120 = PRESENTATION_STYLE_ASSIGNMENT((#543121)); +#543121 = SURFACE_STYLE_USAGE(.BOTH.,#543122); +#543122 = SURFACE_SIDE_STYLE('',(#543123)); +#543123 = SURFACE_STYLE_FILL_AREA(#543124); +#543124 = FILL_AREA_STYLE('',(#543125)); +#543125 = FILL_AREA_STYLE_COLOUR('',#510798); +#543126 = OVER_RIDING_STYLED_ITEM('overriding color',(#543127),#31311, + #540522); +#543127 = PRESENTATION_STYLE_ASSIGNMENT((#543128)); +#543128 = SURFACE_STYLE_USAGE(.BOTH.,#543129); +#543129 = SURFACE_SIDE_STYLE('',(#543130)); +#543130 = SURFACE_STYLE_FILL_AREA(#543131); +#543131 = FILL_AREA_STYLE('',(#543132)); +#543132 = FILL_AREA_STYLE_COLOUR('',#510798); +#543133 = OVER_RIDING_STYLED_ITEM('overriding color',(#543134),#31328, + #540522); +#543134 = PRESENTATION_STYLE_ASSIGNMENT((#543135)); +#543135 = SURFACE_STYLE_USAGE(.BOTH.,#543136); +#543136 = SURFACE_SIDE_STYLE('',(#543137)); +#543137 = SURFACE_STYLE_FILL_AREA(#543138); +#543138 = FILL_AREA_STYLE('',(#543139)); +#543139 = FILL_AREA_STYLE_COLOUR('',#510798); +#543140 = OVER_RIDING_STYLED_ITEM('overriding color',(#543141),#31349, + #540522); +#543141 = PRESENTATION_STYLE_ASSIGNMENT((#543142)); +#543142 = SURFACE_STYLE_USAGE(.BOTH.,#543143); +#543143 = SURFACE_SIDE_STYLE('',(#543144)); +#543144 = SURFACE_STYLE_FILL_AREA(#543145); +#543145 = FILL_AREA_STYLE('',(#543146)); +#543146 = FILL_AREA_STYLE_COLOUR('',#510798); +#543147 = OVER_RIDING_STYLED_ITEM('overriding color',(#543148),#31370, + #540522); +#543148 = PRESENTATION_STYLE_ASSIGNMENT((#543149)); +#543149 = SURFACE_STYLE_USAGE(.BOTH.,#543150); +#543150 = SURFACE_SIDE_STYLE('',(#543151)); +#543151 = SURFACE_STYLE_FILL_AREA(#543152); +#543152 = FILL_AREA_STYLE('',(#543153)); +#543153 = FILL_AREA_STYLE_COLOUR('',#510798); +#543154 = OVER_RIDING_STYLED_ITEM('overriding color',(#543155),#31387, + #540522); +#543155 = PRESENTATION_STYLE_ASSIGNMENT((#543156)); +#543156 = SURFACE_STYLE_USAGE(.BOTH.,#543157); +#543157 = SURFACE_SIDE_STYLE('',(#543158)); +#543158 = SURFACE_STYLE_FILL_AREA(#543159); +#543159 = FILL_AREA_STYLE('',(#543160)); +#543160 = FILL_AREA_STYLE_COLOUR('',#510798); +#543161 = OVER_RIDING_STYLED_ITEM('overriding color',(#543162),#31408, + #540522); +#543162 = PRESENTATION_STYLE_ASSIGNMENT((#543163)); +#543163 = SURFACE_STYLE_USAGE(.BOTH.,#543164); +#543164 = SURFACE_SIDE_STYLE('',(#543165)); +#543165 = SURFACE_STYLE_FILL_AREA(#543166); +#543166 = FILL_AREA_STYLE('',(#543167)); +#543167 = FILL_AREA_STYLE_COLOUR('',#510798); +#543168 = OVER_RIDING_STYLED_ITEM('overriding color',(#543169),#31429, + #540522); +#543169 = PRESENTATION_STYLE_ASSIGNMENT((#543170)); +#543170 = SURFACE_STYLE_USAGE(.BOTH.,#543171); +#543171 = SURFACE_SIDE_STYLE('',(#543172)); +#543172 = SURFACE_STYLE_FILL_AREA(#543173); +#543173 = FILL_AREA_STYLE('',(#543174)); +#543174 = FILL_AREA_STYLE_COLOUR('',#510798); +#543175 = OVER_RIDING_STYLED_ITEM('overriding color',(#543176),#31450, + #540522); +#543176 = PRESENTATION_STYLE_ASSIGNMENT((#543177)); +#543177 = SURFACE_STYLE_USAGE(.BOTH.,#543178); +#543178 = SURFACE_SIDE_STYLE('',(#543179)); +#543179 = SURFACE_STYLE_FILL_AREA(#543180); +#543180 = FILL_AREA_STYLE('',(#543181)); +#543181 = FILL_AREA_STYLE_COLOUR('',#510798); +#543182 = OVER_RIDING_STYLED_ITEM('overriding color',(#543183),#31467, + #540522); +#543183 = PRESENTATION_STYLE_ASSIGNMENT((#543184)); +#543184 = SURFACE_STYLE_USAGE(.BOTH.,#543185); +#543185 = SURFACE_SIDE_STYLE('',(#543186)); +#543186 = SURFACE_STYLE_FILL_AREA(#543187); +#543187 = FILL_AREA_STYLE('',(#543188)); +#543188 = FILL_AREA_STYLE_COLOUR('',#510798); +#543189 = OVER_RIDING_STYLED_ITEM('overriding color',(#543190),#31488, + #540522); +#543190 = PRESENTATION_STYLE_ASSIGNMENT((#543191)); +#543191 = SURFACE_STYLE_USAGE(.BOTH.,#543192); +#543192 = SURFACE_SIDE_STYLE('',(#543193)); +#543193 = SURFACE_STYLE_FILL_AREA(#543194); +#543194 = FILL_AREA_STYLE('',(#543195)); +#543195 = FILL_AREA_STYLE_COLOUR('',#510798); +#543196 = OVER_RIDING_STYLED_ITEM('overriding color',(#543197),#31504, + #540522); +#543197 = PRESENTATION_STYLE_ASSIGNMENT((#543198)); +#543198 = SURFACE_STYLE_USAGE(.BOTH.,#543199); +#543199 = SURFACE_SIDE_STYLE('',(#543200)); +#543200 = SURFACE_STYLE_FILL_AREA(#543201); +#543201 = FILL_AREA_STYLE('',(#543202)); +#543202 = FILL_AREA_STYLE_COLOUR('',#510798); +#543203 = OVER_RIDING_STYLED_ITEM('overriding color',(#543204),#31549, + #540522); +#543204 = PRESENTATION_STYLE_ASSIGNMENT((#543205)); +#543205 = SURFACE_STYLE_USAGE(.BOTH.,#543206); +#543206 = SURFACE_SIDE_STYLE('',(#543207)); +#543207 = SURFACE_STYLE_FILL_AREA(#543208); +#543208 = FILL_AREA_STYLE('',(#543209)); +#543209 = FILL_AREA_STYLE_COLOUR('',#510798); +#543210 = OVER_RIDING_STYLED_ITEM('overriding color',(#543211),#31577, + #540522); +#543211 = PRESENTATION_STYLE_ASSIGNMENT((#543212)); +#543212 = SURFACE_STYLE_USAGE(.BOTH.,#543213); +#543213 = SURFACE_SIDE_STYLE('',(#543214)); +#543214 = SURFACE_STYLE_FILL_AREA(#543215); +#543215 = FILL_AREA_STYLE('',(#543216)); +#543216 = FILL_AREA_STYLE_COLOUR('',#506700); +#543217 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #543218,#543226,#543233,#543240,#543247,#543254,#543261,#543268, + #543275,#543282,#543289,#543296,#543303,#543310,#543317,#543324, + #543331,#543338,#543345,#543352,#543359,#543366,#543373,#543380, + #543387,#543394,#543401,#543408,#543415,#543422,#543429,#543436, + #543443,#543450,#543457,#543464,#543471,#543478,#543485,#543492, + #543499,#543506,#543513,#543520,#543527,#543534,#543541,#543548, + #543555,#543562,#543569,#543576,#543583,#543590,#543597,#543605, + #543612,#543619,#543626,#543633,#543640,#543647,#543654,#543661, + #543668,#543675,#543682,#543689,#543696,#543703,#543710,#543717, + #543724,#543731,#543738,#543745,#543752,#543759,#543766,#543773, + #543780,#543787,#543794,#543801,#543808,#543815,#543822,#543829, + #543836,#543843,#543850,#543857,#543864,#543871,#543878,#543885, + #543892,#543899,#543906,#543913,#543920,#543927,#543934,#543941, + #543948,#543955,#543962,#543969,#543976,#543983),#163787); +#543218 = STYLED_ITEM('color',(#543219),#160295); +#543219 = PRESENTATION_STYLE_ASSIGNMENT((#543220)); +#543220 = SURFACE_STYLE_USAGE(.BOTH.,#543221); +#543221 = SURFACE_SIDE_STYLE('',(#543222)); +#543222 = SURFACE_STYLE_FILL_AREA(#543223); +#543223 = FILL_AREA_STYLE('',(#543224)); +#543224 = FILL_AREA_STYLE_COLOUR('',#543225); +#543225 = COLOUR_RGB('',0.894117649055,0.890196087049,0.811764731185); +#543226 = STYLED_ITEM('color',(#543227),#160335); +#543227 = PRESENTATION_STYLE_ASSIGNMENT((#543228)); +#543228 = SURFACE_STYLE_USAGE(.BOTH.,#543229); +#543229 = SURFACE_SIDE_STYLE('',(#543230)); +#543230 = SURFACE_STYLE_FILL_AREA(#543231); +#543231 = FILL_AREA_STYLE('',(#543232)); +#543232 = FILL_AREA_STYLE_COLOUR('',#543225); +#543233 = STYLED_ITEM('color',(#543234),#160415); +#543234 = PRESENTATION_STYLE_ASSIGNMENT((#543235)); +#543235 = SURFACE_STYLE_USAGE(.BOTH.,#543236); +#543236 = SURFACE_SIDE_STYLE('',(#543237)); +#543237 = SURFACE_STYLE_FILL_AREA(#543238); +#543238 = FILL_AREA_STYLE('',(#543239)); +#543239 = FILL_AREA_STYLE_COLOUR('',#543225); +#543240 = STYLED_ITEM('color',(#543241),#160503); +#543241 = PRESENTATION_STYLE_ASSIGNMENT((#543242)); +#543242 = SURFACE_STYLE_USAGE(.BOTH.,#543243); +#543243 = SURFACE_SIDE_STYLE('',(#543244)); +#543244 = SURFACE_STYLE_FILL_AREA(#543245); +#543245 = FILL_AREA_STYLE('',(#543246)); +#543246 = FILL_AREA_STYLE_COLOUR('',#543225); +#543247 = STYLED_ITEM('color',(#543248),#160560); +#543248 = PRESENTATION_STYLE_ASSIGNMENT((#543249)); +#543249 = SURFACE_STYLE_USAGE(.BOTH.,#543250); +#543250 = SURFACE_SIDE_STYLE('',(#543251)); +#543251 = SURFACE_STYLE_FILL_AREA(#543252); +#543252 = FILL_AREA_STYLE('',(#543253)); +#543253 = FILL_AREA_STYLE_COLOUR('',#543225); +#543254 = STYLED_ITEM('color',(#543255),#160577); +#543255 = PRESENTATION_STYLE_ASSIGNMENT((#543256)); +#543256 = SURFACE_STYLE_USAGE(.BOTH.,#543257); +#543257 = SURFACE_SIDE_STYLE('',(#543258)); +#543258 = SURFACE_STYLE_FILL_AREA(#543259); +#543259 = FILL_AREA_STYLE('',(#543260)); +#543260 = FILL_AREA_STYLE_COLOUR('',#543225); +#543261 = STYLED_ITEM('color',(#543262),#160601); +#543262 = PRESENTATION_STYLE_ASSIGNMENT((#543263)); +#543263 = SURFACE_STYLE_USAGE(.BOTH.,#543264); +#543264 = SURFACE_SIDE_STYLE('',(#543265)); +#543265 = SURFACE_STYLE_FILL_AREA(#543266); +#543266 = FILL_AREA_STYLE('',(#543267)); +#543267 = FILL_AREA_STYLE_COLOUR('',#543225); +#543268 = STYLED_ITEM('color',(#543269),#160625); +#543269 = PRESENTATION_STYLE_ASSIGNMENT((#543270)); +#543270 = SURFACE_STYLE_USAGE(.BOTH.,#543271); +#543271 = SURFACE_SIDE_STYLE('',(#543272)); +#543272 = SURFACE_STYLE_FILL_AREA(#543273); +#543273 = FILL_AREA_STYLE('',(#543274)); +#543274 = FILL_AREA_STYLE_COLOUR('',#543225); +#543275 = STYLED_ITEM('color',(#543276),#160649); +#543276 = PRESENTATION_STYLE_ASSIGNMENT((#543277)); +#543277 = SURFACE_STYLE_USAGE(.BOTH.,#543278); +#543278 = SURFACE_SIDE_STYLE('',(#543279)); +#543279 = SURFACE_STYLE_FILL_AREA(#543280); +#543280 = FILL_AREA_STYLE('',(#543281)); +#543281 = FILL_AREA_STYLE_COLOUR('',#543225); +#543282 = STYLED_ITEM('color',(#543283),#160705); +#543283 = PRESENTATION_STYLE_ASSIGNMENT((#543284)); +#543284 = SURFACE_STYLE_USAGE(.BOTH.,#543285); +#543285 = SURFACE_SIDE_STYLE('',(#543286)); +#543286 = SURFACE_STYLE_FILL_AREA(#543287); +#543287 = FILL_AREA_STYLE('',(#543288)); +#543288 = FILL_AREA_STYLE_COLOUR('',#543225); +#543289 = STYLED_ITEM('color',(#543290),#160841); +#543290 = PRESENTATION_STYLE_ASSIGNMENT((#543291)); +#543291 = SURFACE_STYLE_USAGE(.BOTH.,#543292); +#543292 = SURFACE_SIDE_STYLE('',(#543293)); +#543293 = SURFACE_STYLE_FILL_AREA(#543294); +#543294 = FILL_AREA_STYLE('',(#543295)); +#543295 = FILL_AREA_STYLE_COLOUR('',#543225); +#543296 = STYLED_ITEM('color',(#543297),#160872); +#543297 = PRESENTATION_STYLE_ASSIGNMENT((#543298)); +#543298 = SURFACE_STYLE_USAGE(.BOTH.,#543299); +#543299 = SURFACE_SIDE_STYLE('',(#543300)); +#543300 = SURFACE_STYLE_FILL_AREA(#543301); +#543301 = FILL_AREA_STYLE('',(#543302)); +#543302 = FILL_AREA_STYLE_COLOUR('',#543225); +#543303 = STYLED_ITEM('color',(#543304),#160884); +#543304 = PRESENTATION_STYLE_ASSIGNMENT((#543305)); +#543305 = SURFACE_STYLE_USAGE(.BOTH.,#543306); +#543306 = SURFACE_SIDE_STYLE('',(#543307)); +#543307 = SURFACE_STYLE_FILL_AREA(#543308); +#543308 = FILL_AREA_STYLE('',(#543309)); +#543309 = FILL_AREA_STYLE_COLOUR('',#543225); +#543310 = STYLED_ITEM('color',(#543311),#160970); +#543311 = PRESENTATION_STYLE_ASSIGNMENT((#543312)); +#543312 = SURFACE_STYLE_USAGE(.BOTH.,#543313); +#543313 = SURFACE_SIDE_STYLE('',(#543314)); +#543314 = SURFACE_STYLE_FILL_AREA(#543315); +#543315 = FILL_AREA_STYLE('',(#543316)); +#543316 = FILL_AREA_STYLE_COLOUR('',#543225); +#543317 = STYLED_ITEM('color',(#543318),#160984); +#543318 = PRESENTATION_STYLE_ASSIGNMENT((#543319)); +#543319 = SURFACE_STYLE_USAGE(.BOTH.,#543320); +#543320 = SURFACE_SIDE_STYLE('',(#543321)); +#543321 = SURFACE_STYLE_FILL_AREA(#543322); +#543322 = FILL_AREA_STYLE('',(#543323)); +#543323 = FILL_AREA_STYLE_COLOUR('',#543225); +#543324 = STYLED_ITEM('color',(#543325),#161040); +#543325 = PRESENTATION_STYLE_ASSIGNMENT((#543326)); +#543326 = SURFACE_STYLE_USAGE(.BOTH.,#543327); +#543327 = SURFACE_SIDE_STYLE('',(#543328)); +#543328 = SURFACE_STYLE_FILL_AREA(#543329); +#543329 = FILL_AREA_STYLE('',(#543330)); +#543330 = FILL_AREA_STYLE_COLOUR('',#543225); +#543331 = STYLED_ITEM('color',(#543332),#161097); +#543332 = PRESENTATION_STYLE_ASSIGNMENT((#543333)); +#543333 = SURFACE_STYLE_USAGE(.BOTH.,#543334); +#543334 = SURFACE_SIDE_STYLE('',(#543335)); +#543335 = SURFACE_STYLE_FILL_AREA(#543336); +#543336 = FILL_AREA_STYLE('',(#543337)); +#543337 = FILL_AREA_STYLE_COLOUR('',#543225); +#543338 = STYLED_ITEM('color',(#543339),#161121); +#543339 = PRESENTATION_STYLE_ASSIGNMENT((#543340)); +#543340 = SURFACE_STYLE_USAGE(.BOTH.,#543341); +#543341 = SURFACE_SIDE_STYLE('',(#543342)); +#543342 = SURFACE_STYLE_FILL_AREA(#543343); +#543343 = FILL_AREA_STYLE('',(#543344)); +#543344 = FILL_AREA_STYLE_COLOUR('',#543225); +#543345 = STYLED_ITEM('color',(#543346),#161194); +#543346 = PRESENTATION_STYLE_ASSIGNMENT((#543347)); +#543347 = SURFACE_STYLE_USAGE(.BOTH.,#543348); +#543348 = SURFACE_SIDE_STYLE('',(#543349)); +#543349 = SURFACE_STYLE_FILL_AREA(#543350); +#543350 = FILL_AREA_STYLE('',(#543351)); +#543351 = FILL_AREA_STYLE_COLOUR('',#543225); +#543352 = STYLED_ITEM('color',(#543353),#161218); +#543353 = PRESENTATION_STYLE_ASSIGNMENT((#543354)); +#543354 = SURFACE_STYLE_USAGE(.BOTH.,#543355); +#543355 = SURFACE_SIDE_STYLE('',(#543356)); +#543356 = SURFACE_STYLE_FILL_AREA(#543357); +#543357 = FILL_AREA_STYLE('',(#543358)); +#543358 = FILL_AREA_STYLE_COLOUR('',#543225); +#543359 = STYLED_ITEM('color',(#543360),#161251); +#543360 = PRESENTATION_STYLE_ASSIGNMENT((#543361)); +#543361 = SURFACE_STYLE_USAGE(.BOTH.,#543362); +#543362 = SURFACE_SIDE_STYLE('',(#543363)); +#543363 = SURFACE_STYLE_FILL_AREA(#543364); +#543364 = FILL_AREA_STYLE('',(#543365)); +#543365 = FILL_AREA_STYLE_COLOUR('',#543225); +#543366 = STYLED_ITEM('color',(#543367),#161362); +#543367 = PRESENTATION_STYLE_ASSIGNMENT((#543368)); +#543368 = SURFACE_STYLE_USAGE(.BOTH.,#543369); +#543369 = SURFACE_SIDE_STYLE('',(#543370)); +#543370 = SURFACE_STYLE_FILL_AREA(#543371); +#543371 = FILL_AREA_STYLE('',(#543372)); +#543372 = FILL_AREA_STYLE_COLOUR('',#543225); +#543373 = STYLED_ITEM('color',(#543374),#161479); +#543374 = PRESENTATION_STYLE_ASSIGNMENT((#543375)); +#543375 = SURFACE_STYLE_USAGE(.BOTH.,#543376); +#543376 = SURFACE_SIDE_STYLE('',(#543377)); +#543377 = SURFACE_STYLE_FILL_AREA(#543378); +#543378 = FILL_AREA_STYLE('',(#543379)); +#543379 = FILL_AREA_STYLE_COLOUR('',#543225); +#543380 = STYLED_ITEM('color',(#543381),#161519); +#543381 = PRESENTATION_STYLE_ASSIGNMENT((#543382)); +#543382 = SURFACE_STYLE_USAGE(.BOTH.,#543383); +#543383 = SURFACE_SIDE_STYLE('',(#543384)); +#543384 = SURFACE_STYLE_FILL_AREA(#543385); +#543385 = FILL_AREA_STYLE('',(#543386)); +#543386 = FILL_AREA_STYLE_COLOUR('',#543225); +#543387 = STYLED_ITEM('color',(#543388),#161550); +#543388 = PRESENTATION_STYLE_ASSIGNMENT((#543389)); +#543389 = SURFACE_STYLE_USAGE(.BOTH.,#543390); +#543390 = SURFACE_SIDE_STYLE('',(#543391)); +#543391 = SURFACE_STYLE_FILL_AREA(#543392); +#543392 = FILL_AREA_STYLE('',(#543393)); +#543393 = FILL_AREA_STYLE_COLOUR('',#543225); +#543394 = STYLED_ITEM('color',(#543395),#161568); +#543395 = PRESENTATION_STYLE_ASSIGNMENT((#543396)); +#543396 = SURFACE_STYLE_USAGE(.BOTH.,#543397); +#543397 = SURFACE_SIDE_STYLE('',(#543398)); +#543398 = SURFACE_STYLE_FILL_AREA(#543399); +#543399 = FILL_AREA_STYLE('',(#543400)); +#543400 = FILL_AREA_STYLE_COLOUR('',#543225); +#543401 = STYLED_ITEM('color',(#543402),#161585); +#543402 = PRESENTATION_STYLE_ASSIGNMENT((#543403)); +#543403 = SURFACE_STYLE_USAGE(.BOTH.,#543404); +#543404 = SURFACE_SIDE_STYLE('',(#543405)); +#543405 = SURFACE_STYLE_FILL_AREA(#543406); +#543406 = FILL_AREA_STYLE('',(#543407)); +#543407 = FILL_AREA_STYLE_COLOUR('',#543225); +#543408 = STYLED_ITEM('color',(#543409),#161603); +#543409 = PRESENTATION_STYLE_ASSIGNMENT((#543410)); +#543410 = SURFACE_STYLE_USAGE(.BOTH.,#543411); +#543411 = SURFACE_SIDE_STYLE('',(#543412)); +#543412 = SURFACE_STYLE_FILL_AREA(#543413); +#543413 = FILL_AREA_STYLE('',(#543414)); +#543414 = FILL_AREA_STYLE_COLOUR('',#543225); +#543415 = STYLED_ITEM('color',(#543416),#161629); +#543416 = PRESENTATION_STYLE_ASSIGNMENT((#543417)); +#543417 = SURFACE_STYLE_USAGE(.BOTH.,#543418); +#543418 = SURFACE_SIDE_STYLE('',(#543419)); +#543419 = SURFACE_STYLE_FILL_AREA(#543420); +#543420 = FILL_AREA_STYLE('',(#543421)); +#543421 = FILL_AREA_STYLE_COLOUR('',#543225); +#543422 = STYLED_ITEM('color',(#543423),#161660); +#543423 = PRESENTATION_STYLE_ASSIGNMENT((#543424)); +#543424 = SURFACE_STYLE_USAGE(.BOTH.,#543425); +#543425 = SURFACE_SIDE_STYLE('',(#543426)); +#543426 = SURFACE_STYLE_FILL_AREA(#543427); +#543427 = FILL_AREA_STYLE('',(#543428)); +#543428 = FILL_AREA_STYLE_COLOUR('',#543225); +#543429 = STYLED_ITEM('color',(#543430),#161677); +#543430 = PRESENTATION_STYLE_ASSIGNMENT((#543431)); +#543431 = SURFACE_STYLE_USAGE(.BOTH.,#543432); +#543432 = SURFACE_SIDE_STYLE('',(#543433)); +#543433 = SURFACE_STYLE_FILL_AREA(#543434); +#543434 = FILL_AREA_STYLE('',(#543435)); +#543435 = FILL_AREA_STYLE_COLOUR('',#543225); +#543436 = STYLED_ITEM('color',(#543437),#161710); +#543437 = PRESENTATION_STYLE_ASSIGNMENT((#543438)); +#543438 = SURFACE_STYLE_USAGE(.BOTH.,#543439); +#543439 = SURFACE_SIDE_STYLE('',(#543440)); +#543440 = SURFACE_STYLE_FILL_AREA(#543441); +#543441 = FILL_AREA_STYLE('',(#543442)); +#543442 = FILL_AREA_STYLE_COLOUR('',#543225); +#543443 = STYLED_ITEM('color',(#543444),#161750); +#543444 = PRESENTATION_STYLE_ASSIGNMENT((#543445)); +#543445 = SURFACE_STYLE_USAGE(.BOTH.,#543446); +#543446 = SURFACE_SIDE_STYLE('',(#543447)); +#543447 = SURFACE_STYLE_FILL_AREA(#543448); +#543448 = FILL_AREA_STYLE('',(#543449)); +#543449 = FILL_AREA_STYLE_COLOUR('',#543225); +#543450 = STYLED_ITEM('color',(#543451),#161773); +#543451 = PRESENTATION_STYLE_ASSIGNMENT((#543452)); +#543452 = SURFACE_STYLE_USAGE(.BOTH.,#543453); +#543453 = SURFACE_SIDE_STYLE('',(#543454)); +#543454 = SURFACE_STYLE_FILL_AREA(#543455); +#543455 = FILL_AREA_STYLE('',(#543456)); +#543456 = FILL_AREA_STYLE_COLOUR('',#543225); +#543457 = STYLED_ITEM('color',(#543458),#161822); +#543458 = PRESENTATION_STYLE_ASSIGNMENT((#543459)); +#543459 = SURFACE_STYLE_USAGE(.BOTH.,#543460); +#543460 = SURFACE_SIDE_STYLE('',(#543461)); +#543461 = SURFACE_STYLE_FILL_AREA(#543462); +#543462 = FILL_AREA_STYLE('',(#543463)); +#543463 = FILL_AREA_STYLE_COLOUR('',#543225); +#543464 = STYLED_ITEM('color',(#543465),#161846); +#543465 = PRESENTATION_STYLE_ASSIGNMENT((#543466)); +#543466 = SURFACE_STYLE_USAGE(.BOTH.,#543467); +#543467 = SURFACE_SIDE_STYLE('',(#543468)); +#543468 = SURFACE_STYLE_FILL_AREA(#543469); +#543469 = FILL_AREA_STYLE('',(#543470)); +#543470 = FILL_AREA_STYLE_COLOUR('',#543225); +#543471 = STYLED_ITEM('color',(#543472),#161893); +#543472 = PRESENTATION_STYLE_ASSIGNMENT((#543473)); +#543473 = SURFACE_STYLE_USAGE(.BOTH.,#543474); +#543474 = SURFACE_SIDE_STYLE('',(#543475)); +#543475 = SURFACE_STYLE_FILL_AREA(#543476); +#543476 = FILL_AREA_STYLE('',(#543477)); +#543477 = FILL_AREA_STYLE_COLOUR('',#543225); +#543478 = STYLED_ITEM('color',(#543479),#161910); +#543479 = PRESENTATION_STYLE_ASSIGNMENT((#543480)); +#543480 = SURFACE_STYLE_USAGE(.BOTH.,#543481); +#543481 = SURFACE_SIDE_STYLE('',(#543482)); +#543482 = SURFACE_STYLE_FILL_AREA(#543483); +#543483 = FILL_AREA_STYLE('',(#543484)); +#543484 = FILL_AREA_STYLE_COLOUR('',#543225); +#543485 = STYLED_ITEM('color',(#543486),#161927); +#543486 = PRESENTATION_STYLE_ASSIGNMENT((#543487)); +#543487 = SURFACE_STYLE_USAGE(.BOTH.,#543488); +#543488 = SURFACE_SIDE_STYLE('',(#543489)); +#543489 = SURFACE_STYLE_FILL_AREA(#543490); +#543490 = FILL_AREA_STYLE('',(#543491)); +#543491 = FILL_AREA_STYLE_COLOUR('',#543225); +#543492 = STYLED_ITEM('color',(#543493),#161939); +#543493 = PRESENTATION_STYLE_ASSIGNMENT((#543494)); +#543494 = SURFACE_STYLE_USAGE(.BOTH.,#543495); +#543495 = SURFACE_SIDE_STYLE('',(#543496)); +#543496 = SURFACE_STYLE_FILL_AREA(#543497); +#543497 = FILL_AREA_STYLE('',(#543498)); +#543498 = FILL_AREA_STYLE_COLOUR('',#543225); +#543499 = STYLED_ITEM('color',(#543500),#161986); +#543500 = PRESENTATION_STYLE_ASSIGNMENT((#543501)); +#543501 = SURFACE_STYLE_USAGE(.BOTH.,#543502); +#543502 = SURFACE_SIDE_STYLE('',(#543503)); +#543503 = SURFACE_STYLE_FILL_AREA(#543504); +#543504 = FILL_AREA_STYLE('',(#543505)); +#543505 = FILL_AREA_STYLE_COLOUR('',#543225); +#543506 = STYLED_ITEM('color',(#543507),#162017); +#543507 = PRESENTATION_STYLE_ASSIGNMENT((#543508)); +#543508 = SURFACE_STYLE_USAGE(.BOTH.,#543509); +#543509 = SURFACE_SIDE_STYLE('',(#543510)); +#543510 = SURFACE_STYLE_FILL_AREA(#543511); +#543511 = FILL_AREA_STYLE('',(#543512)); +#543512 = FILL_AREA_STYLE_COLOUR('',#543225); +#543513 = STYLED_ITEM('color',(#543514),#162034); +#543514 = PRESENTATION_STYLE_ASSIGNMENT((#543515)); +#543515 = SURFACE_STYLE_USAGE(.BOTH.,#543516); +#543516 = SURFACE_SIDE_STYLE('',(#543517)); +#543517 = SURFACE_STYLE_FILL_AREA(#543518); +#543518 = FILL_AREA_STYLE('',(#543519)); +#543519 = FILL_AREA_STYLE_COLOUR('',#543225); +#543520 = STYLED_ITEM('color',(#543521),#162051); +#543521 = PRESENTATION_STYLE_ASSIGNMENT((#543522)); +#543522 = SURFACE_STYLE_USAGE(.BOTH.,#543523); +#543523 = SURFACE_SIDE_STYLE('',(#543524)); +#543524 = SURFACE_STYLE_FILL_AREA(#543525); +#543525 = FILL_AREA_STYLE('',(#543526)); +#543526 = FILL_AREA_STYLE_COLOUR('',#543225); +#543527 = STYLED_ITEM('color',(#543528),#162075); +#543528 = PRESENTATION_STYLE_ASSIGNMENT((#543529)); +#543529 = SURFACE_STYLE_USAGE(.BOTH.,#543530); +#543530 = SURFACE_SIDE_STYLE('',(#543531)); +#543531 = SURFACE_STYLE_FILL_AREA(#543532); +#543532 = FILL_AREA_STYLE('',(#543533)); +#543533 = FILL_AREA_STYLE_COLOUR('',#543225); +#543534 = STYLED_ITEM('color',(#543535),#162099); +#543535 = PRESENTATION_STYLE_ASSIGNMENT((#543536)); +#543536 = SURFACE_STYLE_USAGE(.BOTH.,#543537); +#543537 = SURFACE_SIDE_STYLE('',(#543538)); +#543538 = SURFACE_STYLE_FILL_AREA(#543539); +#543539 = FILL_AREA_STYLE('',(#543540)); +#543540 = FILL_AREA_STYLE_COLOUR('',#543225); +#543541 = STYLED_ITEM('color',(#543542),#162116); +#543542 = PRESENTATION_STYLE_ASSIGNMENT((#543543)); +#543543 = SURFACE_STYLE_USAGE(.BOTH.,#543544); +#543544 = SURFACE_SIDE_STYLE('',(#543545)); +#543545 = SURFACE_STYLE_FILL_AREA(#543546); +#543546 = FILL_AREA_STYLE('',(#543547)); +#543547 = FILL_AREA_STYLE_COLOUR('',#543225); +#543548 = STYLED_ITEM('color',(#543549),#162133); +#543549 = PRESENTATION_STYLE_ASSIGNMENT((#543550)); +#543550 = SURFACE_STYLE_USAGE(.BOTH.,#543551); +#543551 = SURFACE_SIDE_STYLE('',(#543552)); +#543552 = SURFACE_STYLE_FILL_AREA(#543553); +#543553 = FILL_AREA_STYLE('',(#543554)); +#543554 = FILL_AREA_STYLE_COLOUR('',#543225); +#543555 = STYLED_ITEM('color',(#543556),#162145); +#543556 = PRESENTATION_STYLE_ASSIGNMENT((#543557)); +#543557 = SURFACE_STYLE_USAGE(.BOTH.,#543558); +#543558 = SURFACE_SIDE_STYLE('',(#543559)); +#543559 = SURFACE_STYLE_FILL_AREA(#543560); +#543560 = FILL_AREA_STYLE('',(#543561)); +#543561 = FILL_AREA_STYLE_COLOUR('',#543225); +#543562 = STYLED_ITEM('color',(#543563),#162162); +#543563 = PRESENTATION_STYLE_ASSIGNMENT((#543564)); +#543564 = SURFACE_STYLE_USAGE(.BOTH.,#543565); +#543565 = SURFACE_SIDE_STYLE('',(#543566)); +#543566 = SURFACE_STYLE_FILL_AREA(#543567); +#543567 = FILL_AREA_STYLE('',(#543568)); +#543568 = FILL_AREA_STYLE_COLOUR('',#543225); +#543569 = STYLED_ITEM('color',(#543570),#162174); +#543570 = PRESENTATION_STYLE_ASSIGNMENT((#543571)); +#543571 = SURFACE_STYLE_USAGE(.BOTH.,#543572); +#543572 = SURFACE_SIDE_STYLE('',(#543573)); +#543573 = SURFACE_STYLE_FILL_AREA(#543574); +#543574 = FILL_AREA_STYLE('',(#543575)); +#543575 = FILL_AREA_STYLE_COLOUR('',#543225); +#543576 = STYLED_ITEM('color',(#543577),#162198); +#543577 = PRESENTATION_STYLE_ASSIGNMENT((#543578)); +#543578 = SURFACE_STYLE_USAGE(.BOTH.,#543579); +#543579 = SURFACE_SIDE_STYLE('',(#543580)); +#543580 = SURFACE_STYLE_FILL_AREA(#543581); +#543581 = FILL_AREA_STYLE('',(#543582)); +#543582 = FILL_AREA_STYLE_COLOUR('',#543225); +#543583 = STYLED_ITEM('color',(#543584),#162216); +#543584 = PRESENTATION_STYLE_ASSIGNMENT((#543585)); +#543585 = SURFACE_STYLE_USAGE(.BOTH.,#543586); +#543586 = SURFACE_SIDE_STYLE('',(#543587)); +#543587 = SURFACE_STYLE_FILL_AREA(#543588); +#543588 = FILL_AREA_STYLE('',(#543589)); +#543589 = FILL_AREA_STYLE_COLOUR('',#543225); +#543590 = STYLED_ITEM('color',(#543591),#162228); +#543591 = PRESENTATION_STYLE_ASSIGNMENT((#543592)); +#543592 = SURFACE_STYLE_USAGE(.BOTH.,#543593); +#543593 = SURFACE_SIDE_STYLE('',(#543594)); +#543594 = SURFACE_STYLE_FILL_AREA(#543595); +#543595 = FILL_AREA_STYLE('',(#543596)); +#543596 = FILL_AREA_STYLE_COLOUR('',#543225); +#543597 = STYLED_ITEM('color',(#543598),#162242); +#543598 = PRESENTATION_STYLE_ASSIGNMENT((#543599)); +#543599 = SURFACE_STYLE_USAGE(.BOTH.,#543600); +#543600 = SURFACE_SIDE_STYLE('',(#543601)); +#543601 = SURFACE_STYLE_FILL_AREA(#543602); +#543602 = FILL_AREA_STYLE('',(#543603)); +#543603 = FILL_AREA_STYLE_COLOUR('',#543604); +#543604 = COLOUR_RGB('',0.823529417451,0.819607860991,0.780392170416); +#543605 = STYLED_ITEM('color',(#543606),#162273); +#543606 = PRESENTATION_STYLE_ASSIGNMENT((#543607)); +#543607 = SURFACE_STYLE_USAGE(.BOTH.,#543608); +#543608 = SURFACE_SIDE_STYLE('',(#543609)); +#543609 = SURFACE_STYLE_FILL_AREA(#543610); +#543610 = FILL_AREA_STYLE('',(#543611)); +#543611 = FILL_AREA_STYLE_COLOUR('',#543604); +#543612 = STYLED_ITEM('color',(#543613),#162297); +#543613 = PRESENTATION_STYLE_ASSIGNMENT((#543614)); +#543614 = SURFACE_STYLE_USAGE(.BOTH.,#543615); +#543615 = SURFACE_SIDE_STYLE('',(#543616)); +#543616 = SURFACE_STYLE_FILL_AREA(#543617); +#543617 = FILL_AREA_STYLE('',(#543618)); +#543618 = FILL_AREA_STYLE_COLOUR('',#543604); +#543619 = STYLED_ITEM('color',(#543620),#162321); +#543620 = PRESENTATION_STYLE_ASSIGNMENT((#543621)); +#543621 = SURFACE_STYLE_USAGE(.BOTH.,#543622); +#543622 = SURFACE_SIDE_STYLE('',(#543623)); +#543623 = SURFACE_STYLE_FILL_AREA(#543624); +#543624 = FILL_AREA_STYLE('',(#543625)); +#543625 = FILL_AREA_STYLE_COLOUR('',#543604); +#543626 = STYLED_ITEM('color',(#543627),#162338); +#543627 = PRESENTATION_STYLE_ASSIGNMENT((#543628)); +#543628 = SURFACE_STYLE_USAGE(.BOTH.,#543629); +#543629 = SURFACE_SIDE_STYLE('',(#543630)); +#543630 = SURFACE_STYLE_FILL_AREA(#543631); +#543631 = FILL_AREA_STYLE('',(#543632)); +#543632 = FILL_AREA_STYLE_COLOUR('',#543604); +#543633 = STYLED_ITEM('color',(#543634),#162369); +#543634 = PRESENTATION_STYLE_ASSIGNMENT((#543635)); +#543635 = SURFACE_STYLE_USAGE(.BOTH.,#543636); +#543636 = SURFACE_SIDE_STYLE('',(#543637)); +#543637 = SURFACE_STYLE_FILL_AREA(#543638); +#543638 = FILL_AREA_STYLE('',(#543639)); +#543639 = FILL_AREA_STYLE_COLOUR('',#543604); +#543640 = STYLED_ITEM('color',(#543641),#162393); +#543641 = PRESENTATION_STYLE_ASSIGNMENT((#543642)); +#543642 = SURFACE_STYLE_USAGE(.BOTH.,#543643); +#543643 = SURFACE_SIDE_STYLE('',(#543644)); +#543644 = SURFACE_STYLE_FILL_AREA(#543645); +#543645 = FILL_AREA_STYLE('',(#543646)); +#543646 = FILL_AREA_STYLE_COLOUR('',#543604); +#543647 = STYLED_ITEM('color',(#543648),#162417); +#543648 = PRESENTATION_STYLE_ASSIGNMENT((#543649)); +#543649 = SURFACE_STYLE_USAGE(.BOTH.,#543650); +#543650 = SURFACE_SIDE_STYLE('',(#543651)); +#543651 = SURFACE_STYLE_FILL_AREA(#543652); +#543652 = FILL_AREA_STYLE('',(#543653)); +#543653 = FILL_AREA_STYLE_COLOUR('',#543604); +#543654 = STYLED_ITEM('color',(#543655),#162434); +#543655 = PRESENTATION_STYLE_ASSIGNMENT((#543656)); +#543656 = SURFACE_STYLE_USAGE(.BOTH.,#543657); +#543657 = SURFACE_SIDE_STYLE('',(#543658)); +#543658 = SURFACE_STYLE_FILL_AREA(#543659); +#543659 = FILL_AREA_STYLE('',(#543660)); +#543660 = FILL_AREA_STYLE_COLOUR('',#543225); +#543661 = STYLED_ITEM('color',(#543662),#162480); +#543662 = PRESENTATION_STYLE_ASSIGNMENT((#543663)); +#543663 = SURFACE_STYLE_USAGE(.BOTH.,#543664); +#543664 = SURFACE_SIDE_STYLE('',(#543665)); +#543665 = SURFACE_STYLE_FILL_AREA(#543666); +#543666 = FILL_AREA_STYLE('',(#543667)); +#543667 = FILL_AREA_STYLE_COLOUR('',#543225); +#543668 = STYLED_ITEM('color',(#543669),#162526); +#543669 = PRESENTATION_STYLE_ASSIGNMENT((#543670)); +#543670 = SURFACE_STYLE_USAGE(.BOTH.,#543671); +#543671 = SURFACE_SIDE_STYLE('',(#543672)); +#543672 = SURFACE_STYLE_FILL_AREA(#543673); +#543673 = FILL_AREA_STYLE('',(#543674)); +#543674 = FILL_AREA_STYLE_COLOUR('',#543225); +#543675 = STYLED_ITEM('color',(#543676),#162543); +#543676 = PRESENTATION_STYLE_ASSIGNMENT((#543677)); +#543677 = SURFACE_STYLE_USAGE(.BOTH.,#543678); +#543678 = SURFACE_SIDE_STYLE('',(#543679)); +#543679 = SURFACE_STYLE_FILL_AREA(#543680); +#543680 = FILL_AREA_STYLE('',(#543681)); +#543681 = FILL_AREA_STYLE_COLOUR('',#543225); +#543682 = STYLED_ITEM('color',(#543683),#162555); +#543683 = PRESENTATION_STYLE_ASSIGNMENT((#543684)); +#543684 = SURFACE_STYLE_USAGE(.BOTH.,#543685); +#543685 = SURFACE_SIDE_STYLE('',(#543686)); +#543686 = SURFACE_STYLE_FILL_AREA(#543687); +#543687 = FILL_AREA_STYLE('',(#543688)); +#543688 = FILL_AREA_STYLE_COLOUR('',#543604); +#543689 = STYLED_ITEM('color',(#543690),#162586); +#543690 = PRESENTATION_STYLE_ASSIGNMENT((#543691)); +#543691 = SURFACE_STYLE_USAGE(.BOTH.,#543692); +#543692 = SURFACE_SIDE_STYLE('',(#543693)); +#543693 = SURFACE_STYLE_FILL_AREA(#543694); +#543694 = FILL_AREA_STYLE('',(#543695)); +#543695 = FILL_AREA_STYLE_COLOUR('',#543604); +#543696 = STYLED_ITEM('color',(#543697),#162610); +#543697 = PRESENTATION_STYLE_ASSIGNMENT((#543698)); +#543698 = SURFACE_STYLE_USAGE(.BOTH.,#543699); +#543699 = SURFACE_SIDE_STYLE('',(#543700)); +#543700 = SURFACE_STYLE_FILL_AREA(#543701); +#543701 = FILL_AREA_STYLE('',(#543702)); +#543702 = FILL_AREA_STYLE_COLOUR('',#543604); +#543703 = STYLED_ITEM('color',(#543704),#162634); +#543704 = PRESENTATION_STYLE_ASSIGNMENT((#543705)); +#543705 = SURFACE_STYLE_USAGE(.BOTH.,#543706); +#543706 = SURFACE_SIDE_STYLE('',(#543707)); +#543707 = SURFACE_STYLE_FILL_AREA(#543708); +#543708 = FILL_AREA_STYLE('',(#543709)); +#543709 = FILL_AREA_STYLE_COLOUR('',#543604); +#543710 = STYLED_ITEM('color',(#543711),#162651); +#543711 = PRESENTATION_STYLE_ASSIGNMENT((#543712)); +#543712 = SURFACE_STYLE_USAGE(.BOTH.,#543713); +#543713 = SURFACE_SIDE_STYLE('',(#543714)); +#543714 = SURFACE_STYLE_FILL_AREA(#543715); +#543715 = FILL_AREA_STYLE('',(#543716)); +#543716 = FILL_AREA_STYLE_COLOUR('',#543604); +#543717 = STYLED_ITEM('color',(#543718),#162682); +#543718 = PRESENTATION_STYLE_ASSIGNMENT((#543719)); +#543719 = SURFACE_STYLE_USAGE(.BOTH.,#543720); +#543720 = SURFACE_SIDE_STYLE('',(#543721)); +#543721 = SURFACE_STYLE_FILL_AREA(#543722); +#543722 = FILL_AREA_STYLE('',(#543723)); +#543723 = FILL_AREA_STYLE_COLOUR('',#543604); +#543724 = STYLED_ITEM('color',(#543725),#162706); +#543725 = PRESENTATION_STYLE_ASSIGNMENT((#543726)); +#543726 = SURFACE_STYLE_USAGE(.BOTH.,#543727); +#543727 = SURFACE_SIDE_STYLE('',(#543728)); +#543728 = SURFACE_STYLE_FILL_AREA(#543729); +#543729 = FILL_AREA_STYLE('',(#543730)); +#543730 = FILL_AREA_STYLE_COLOUR('',#543604); +#543731 = STYLED_ITEM('color',(#543732),#162730); +#543732 = PRESENTATION_STYLE_ASSIGNMENT((#543733)); +#543733 = SURFACE_STYLE_USAGE(.BOTH.,#543734); +#543734 = SURFACE_SIDE_STYLE('',(#543735)); +#543735 = SURFACE_STYLE_FILL_AREA(#543736); +#543736 = FILL_AREA_STYLE('',(#543737)); +#543737 = FILL_AREA_STYLE_COLOUR('',#543604); +#543738 = STYLED_ITEM('color',(#543739),#162747); +#543739 = PRESENTATION_STYLE_ASSIGNMENT((#543740)); +#543740 = SURFACE_STYLE_USAGE(.BOTH.,#543741); +#543741 = SURFACE_SIDE_STYLE('',(#543742)); +#543742 = SURFACE_STYLE_FILL_AREA(#543743); +#543743 = FILL_AREA_STYLE('',(#543744)); +#543744 = FILL_AREA_STYLE_COLOUR('',#543604); +#543745 = STYLED_ITEM('color',(#543746),#162844); +#543746 = PRESENTATION_STYLE_ASSIGNMENT((#543747)); +#543747 = SURFACE_STYLE_USAGE(.BOTH.,#543748); +#543748 = SURFACE_SIDE_STYLE('',(#543749)); +#543749 = SURFACE_STYLE_FILL_AREA(#543750); +#543750 = FILL_AREA_STYLE('',(#543751)); +#543751 = FILL_AREA_STYLE_COLOUR('',#543604); +#543752 = STYLED_ITEM('color',(#543753),#162868); +#543753 = PRESENTATION_STYLE_ASSIGNMENT((#543754)); +#543754 = SURFACE_STYLE_USAGE(.BOTH.,#543755); +#543755 = SURFACE_SIDE_STYLE('',(#543756)); +#543756 = SURFACE_STYLE_FILL_AREA(#543757); +#543757 = FILL_AREA_STYLE('',(#543758)); +#543758 = FILL_AREA_STYLE_COLOUR('',#543604); +#543759 = STYLED_ITEM('color',(#543760),#162958); +#543760 = PRESENTATION_STYLE_ASSIGNMENT((#543761)); +#543761 = SURFACE_STYLE_USAGE(.BOTH.,#543762); +#543762 = SURFACE_SIDE_STYLE('',(#543763)); +#543763 = SURFACE_STYLE_FILL_AREA(#543764); +#543764 = FILL_AREA_STYLE('',(#543765)); +#543765 = FILL_AREA_STYLE_COLOUR('',#543604); +#543766 = STYLED_ITEM('color',(#543767),#162975); +#543767 = PRESENTATION_STYLE_ASSIGNMENT((#543768)); +#543768 = SURFACE_STYLE_USAGE(.BOTH.,#543769); +#543769 = SURFACE_SIDE_STYLE('',(#543770)); +#543770 = SURFACE_STYLE_FILL_AREA(#543771); +#543771 = FILL_AREA_STYLE('',(#543772)); +#543772 = FILL_AREA_STYLE_COLOUR('',#543604); +#543773 = STYLED_ITEM('color',(#543774),#163072); +#543774 = PRESENTATION_STYLE_ASSIGNMENT((#543775)); +#543775 = SURFACE_STYLE_USAGE(.BOTH.,#543776); +#543776 = SURFACE_SIDE_STYLE('',(#543777)); +#543777 = SURFACE_STYLE_FILL_AREA(#543778); +#543778 = FILL_AREA_STYLE('',(#543779)); +#543779 = FILL_AREA_STYLE_COLOUR('',#543604); +#543780 = STYLED_ITEM('color',(#543781),#163096); +#543781 = PRESENTATION_STYLE_ASSIGNMENT((#543782)); +#543782 = SURFACE_STYLE_USAGE(.BOTH.,#543783); +#543783 = SURFACE_SIDE_STYLE('',(#543784)); +#543784 = SURFACE_STYLE_FILL_AREA(#543785); +#543785 = FILL_AREA_STYLE('',(#543786)); +#543786 = FILL_AREA_STYLE_COLOUR('',#543604); +#543787 = STYLED_ITEM('color',(#543788),#163186); +#543788 = PRESENTATION_STYLE_ASSIGNMENT((#543789)); +#543789 = SURFACE_STYLE_USAGE(.BOTH.,#543790); +#543790 = SURFACE_SIDE_STYLE('',(#543791)); +#543791 = SURFACE_STYLE_FILL_AREA(#543792); +#543792 = FILL_AREA_STYLE('',(#543793)); +#543793 = FILL_AREA_STYLE_COLOUR('',#543604); +#543794 = STYLED_ITEM('color',(#543795),#163203); +#543795 = PRESENTATION_STYLE_ASSIGNMENT((#543796)); +#543796 = SURFACE_STYLE_USAGE(.BOTH.,#543797); +#543797 = SURFACE_SIDE_STYLE('',(#543798)); +#543798 = SURFACE_STYLE_FILL_AREA(#543799); +#543799 = FILL_AREA_STYLE('',(#543800)); +#543800 = FILL_AREA_STYLE_COLOUR('',#543604); +#543801 = STYLED_ITEM('color',(#543802),#163215); +#543802 = PRESENTATION_STYLE_ASSIGNMENT((#543803)); +#543803 = SURFACE_STYLE_USAGE(.BOTH.,#543804); +#543804 = SURFACE_SIDE_STYLE('',(#543805)); +#543805 = SURFACE_STYLE_FILL_AREA(#543806); +#543806 = FILL_AREA_STYLE('',(#543807)); +#543807 = FILL_AREA_STYLE_COLOUR('',#543604); +#543808 = STYLED_ITEM('color',(#543809),#163227); +#543809 = PRESENTATION_STYLE_ASSIGNMENT((#543810)); +#543810 = SURFACE_STYLE_USAGE(.BOTH.,#543811); +#543811 = SURFACE_SIDE_STYLE('',(#543812)); +#543812 = SURFACE_STYLE_FILL_AREA(#543813); +#543813 = FILL_AREA_STYLE('',(#543814)); +#543814 = FILL_AREA_STYLE_COLOUR('',#543604); +#543815 = STYLED_ITEM('color',(#543816),#163244); +#543816 = PRESENTATION_STYLE_ASSIGNMENT((#543817)); +#543817 = SURFACE_STYLE_USAGE(.BOTH.,#543818); +#543818 = SURFACE_SIDE_STYLE('',(#543819)); +#543819 = SURFACE_STYLE_FILL_AREA(#543820); +#543820 = FILL_AREA_STYLE('',(#543821)); +#543821 = FILL_AREA_STYLE_COLOUR('',#543604); +#543822 = STYLED_ITEM('color',(#543823),#163261); +#543823 = PRESENTATION_STYLE_ASSIGNMENT((#543824)); +#543824 = SURFACE_STYLE_USAGE(.BOTH.,#543825); +#543825 = SURFACE_SIDE_STYLE('',(#543826)); +#543826 = SURFACE_STYLE_FILL_AREA(#543827); +#543827 = FILL_AREA_STYLE('',(#543828)); +#543828 = FILL_AREA_STYLE_COLOUR('',#543604); +#543829 = STYLED_ITEM('color',(#543830),#163278); +#543830 = PRESENTATION_STYLE_ASSIGNMENT((#543831)); +#543831 = SURFACE_STYLE_USAGE(.BOTH.,#543832); +#543832 = SURFACE_SIDE_STYLE('',(#543833)); +#543833 = SURFACE_STYLE_FILL_AREA(#543834); +#543834 = FILL_AREA_STYLE('',(#543835)); +#543835 = FILL_AREA_STYLE_COLOUR('',#543604); +#543836 = STYLED_ITEM('color',(#543837),#163311); +#543837 = PRESENTATION_STYLE_ASSIGNMENT((#543838)); +#543838 = SURFACE_STYLE_USAGE(.BOTH.,#543839); +#543839 = SURFACE_SIDE_STYLE('',(#543840)); +#543840 = SURFACE_STYLE_FILL_AREA(#543841); +#543841 = FILL_AREA_STYLE('',(#543842)); +#543842 = FILL_AREA_STYLE_COLOUR('',#543604); +#543843 = STYLED_ITEM('color',(#543844),#163351); +#543844 = PRESENTATION_STYLE_ASSIGNMENT((#543845)); +#543845 = SURFACE_STYLE_USAGE(.BOTH.,#543846); +#543846 = SURFACE_SIDE_STYLE('',(#543847)); +#543847 = SURFACE_STYLE_FILL_AREA(#543848); +#543848 = FILL_AREA_STYLE('',(#543849)); +#543849 = FILL_AREA_STYLE_COLOUR('',#543604); +#543850 = STYLED_ITEM('color',(#543851),#163382); +#543851 = PRESENTATION_STYLE_ASSIGNMENT((#543852)); +#543852 = SURFACE_STYLE_USAGE(.BOTH.,#543853); +#543853 = SURFACE_SIDE_STYLE('',(#543854)); +#543854 = SURFACE_STYLE_FILL_AREA(#543855); +#543855 = FILL_AREA_STYLE('',(#543856)); +#543856 = FILL_AREA_STYLE_COLOUR('',#543604); +#543857 = STYLED_ITEM('color',(#543858),#163399); +#543858 = PRESENTATION_STYLE_ASSIGNMENT((#543859)); +#543859 = SURFACE_STYLE_USAGE(.BOTH.,#543860); +#543860 = SURFACE_SIDE_STYLE('',(#543861)); +#543861 = SURFACE_STYLE_FILL_AREA(#543862); +#543862 = FILL_AREA_STYLE('',(#543863)); +#543863 = FILL_AREA_STYLE_COLOUR('',#543604); +#543864 = STYLED_ITEM('color',(#543865),#163416); +#543865 = PRESENTATION_STYLE_ASSIGNMENT((#543866)); +#543866 = SURFACE_STYLE_USAGE(.BOTH.,#543867); +#543867 = SURFACE_SIDE_STYLE('',(#543868)); +#543868 = SURFACE_STYLE_FILL_AREA(#543869); +#543869 = FILL_AREA_STYLE('',(#543870)); +#543870 = FILL_AREA_STYLE_COLOUR('',#543604); +#543871 = STYLED_ITEM('color',(#543872),#163428); +#543872 = PRESENTATION_STYLE_ASSIGNMENT((#543873)); +#543873 = SURFACE_STYLE_USAGE(.BOTH.,#543874); +#543874 = SURFACE_SIDE_STYLE('',(#543875)); +#543875 = SURFACE_STYLE_FILL_AREA(#543876); +#543876 = FILL_AREA_STYLE('',(#543877)); +#543877 = FILL_AREA_STYLE_COLOUR('',#543604); +#543878 = STYLED_ITEM('color',(#543879),#163461); +#543879 = PRESENTATION_STYLE_ASSIGNMENT((#543880)); +#543880 = SURFACE_STYLE_USAGE(.BOTH.,#543881); +#543881 = SURFACE_SIDE_STYLE('',(#543882)); +#543882 = SURFACE_STYLE_FILL_AREA(#543883); +#543883 = FILL_AREA_STYLE('',(#543884)); +#543884 = FILL_AREA_STYLE_COLOUR('',#543604); +#543885 = STYLED_ITEM('color',(#543886),#163478); +#543886 = PRESENTATION_STYLE_ASSIGNMENT((#543887)); +#543887 = SURFACE_STYLE_USAGE(.BOTH.,#543888); +#543888 = SURFACE_SIDE_STYLE('',(#543889)); +#543889 = SURFACE_STYLE_FILL_AREA(#543890); +#543890 = FILL_AREA_STYLE('',(#543891)); +#543891 = FILL_AREA_STYLE_COLOUR('',#543604); +#543892 = STYLED_ITEM('color',(#543893),#163495); +#543893 = PRESENTATION_STYLE_ASSIGNMENT((#543894)); +#543894 = SURFACE_STYLE_USAGE(.BOTH.,#543895); +#543895 = SURFACE_SIDE_STYLE('',(#543896)); +#543896 = SURFACE_STYLE_FILL_AREA(#543897); +#543897 = FILL_AREA_STYLE('',(#543898)); +#543898 = FILL_AREA_STYLE_COLOUR('',#543604); +#543899 = STYLED_ITEM('color',(#543900),#163512); +#543900 = PRESENTATION_STYLE_ASSIGNMENT((#543901)); +#543901 = SURFACE_STYLE_USAGE(.BOTH.,#543902); +#543902 = SURFACE_SIDE_STYLE('',(#543903)); +#543903 = SURFACE_STYLE_FILL_AREA(#543904); +#543904 = FILL_AREA_STYLE('',(#543905)); +#543905 = FILL_AREA_STYLE_COLOUR('',#543604); +#543906 = STYLED_ITEM('color',(#543907),#163545); +#543907 = PRESENTATION_STYLE_ASSIGNMENT((#543908)); +#543908 = SURFACE_STYLE_USAGE(.BOTH.,#543909); +#543909 = SURFACE_SIDE_STYLE('',(#543910)); +#543910 = SURFACE_STYLE_FILL_AREA(#543911); +#543911 = FILL_AREA_STYLE('',(#543912)); +#543912 = FILL_AREA_STYLE_COLOUR('',#543604); +#543913 = STYLED_ITEM('color',(#543914),#163585); +#543914 = PRESENTATION_STYLE_ASSIGNMENT((#543915)); +#543915 = SURFACE_STYLE_USAGE(.BOTH.,#543916); +#543916 = SURFACE_SIDE_STYLE('',(#543917)); +#543917 = SURFACE_STYLE_FILL_AREA(#543918); +#543918 = FILL_AREA_STYLE('',(#543919)); +#543919 = FILL_AREA_STYLE_COLOUR('',#543604); +#543920 = STYLED_ITEM('color',(#543921),#163616); +#543921 = PRESENTATION_STYLE_ASSIGNMENT((#543922)); +#543922 = SURFACE_STYLE_USAGE(.BOTH.,#543923); +#543923 = SURFACE_SIDE_STYLE('',(#543924)); +#543924 = SURFACE_STYLE_FILL_AREA(#543925); +#543925 = FILL_AREA_STYLE('',(#543926)); +#543926 = FILL_AREA_STYLE_COLOUR('',#543604); +#543927 = STYLED_ITEM('color',(#543928),#163633); +#543928 = PRESENTATION_STYLE_ASSIGNMENT((#543929)); +#543929 = SURFACE_STYLE_USAGE(.BOTH.,#543930); +#543930 = SURFACE_SIDE_STYLE('',(#543931)); +#543931 = SURFACE_STYLE_FILL_AREA(#543932); +#543932 = FILL_AREA_STYLE('',(#543933)); +#543933 = FILL_AREA_STYLE_COLOUR('',#543604); +#543934 = STYLED_ITEM('color',(#543935),#163650); +#543935 = PRESENTATION_STYLE_ASSIGNMENT((#543936)); +#543936 = SURFACE_STYLE_USAGE(.BOTH.,#543937); +#543937 = SURFACE_SIDE_STYLE('',(#543938)); +#543938 = SURFACE_STYLE_FILL_AREA(#543939); +#543939 = FILL_AREA_STYLE('',(#543940)); +#543940 = FILL_AREA_STYLE_COLOUR('',#543604); +#543941 = STYLED_ITEM('color',(#543942),#163662); +#543942 = PRESENTATION_STYLE_ASSIGNMENT((#543943)); +#543943 = SURFACE_STYLE_USAGE(.BOTH.,#543944); +#543944 = SURFACE_SIDE_STYLE('',(#543945)); +#543945 = SURFACE_STYLE_FILL_AREA(#543946); +#543946 = FILL_AREA_STYLE('',(#543947)); +#543947 = FILL_AREA_STYLE_COLOUR('',#543604); +#543948 = STYLED_ITEM('color',(#543949),#163695); +#543949 = PRESENTATION_STYLE_ASSIGNMENT((#543950)); +#543950 = SURFACE_STYLE_USAGE(.BOTH.,#543951); +#543951 = SURFACE_SIDE_STYLE('',(#543952)); +#543952 = SURFACE_STYLE_FILL_AREA(#543953); +#543953 = FILL_AREA_STYLE('',(#543954)); +#543954 = FILL_AREA_STYLE_COLOUR('',#543604); +#543955 = STYLED_ITEM('color',(#543956),#163712); +#543956 = PRESENTATION_STYLE_ASSIGNMENT((#543957)); +#543957 = SURFACE_STYLE_USAGE(.BOTH.,#543958); +#543958 = SURFACE_SIDE_STYLE('',(#543959)); +#543959 = SURFACE_STYLE_FILL_AREA(#543960); +#543960 = FILL_AREA_STYLE('',(#543961)); +#543961 = FILL_AREA_STYLE_COLOUR('',#543604); +#543962 = STYLED_ITEM('color',(#543963),#163729); +#543963 = PRESENTATION_STYLE_ASSIGNMENT((#543964)); +#543964 = SURFACE_STYLE_USAGE(.BOTH.,#543965); +#543965 = SURFACE_SIDE_STYLE('',(#543966)); +#543966 = SURFACE_STYLE_FILL_AREA(#543967); +#543967 = FILL_AREA_STYLE('',(#543968)); +#543968 = FILL_AREA_STYLE_COLOUR('',#543604); +#543969 = STYLED_ITEM('color',(#543970),#163741); +#543970 = PRESENTATION_STYLE_ASSIGNMENT((#543971)); +#543971 = SURFACE_STYLE_USAGE(.BOTH.,#543972); +#543972 = SURFACE_SIDE_STYLE('',(#543973)); +#543973 = SURFACE_STYLE_FILL_AREA(#543974); +#543974 = FILL_AREA_STYLE('',(#543975)); +#543975 = FILL_AREA_STYLE_COLOUR('',#543604); +#543976 = STYLED_ITEM('color',(#543977),#163758); +#543977 = PRESENTATION_STYLE_ASSIGNMENT((#543978)); +#543978 = SURFACE_STYLE_USAGE(.BOTH.,#543979); +#543979 = SURFACE_SIDE_STYLE('',(#543980)); +#543980 = SURFACE_STYLE_FILL_AREA(#543981); +#543981 = FILL_AREA_STYLE('',(#543982)); +#543982 = FILL_AREA_STYLE_COLOUR('',#543604); +#543983 = STYLED_ITEM('color',(#543984),#163775); +#543984 = PRESENTATION_STYLE_ASSIGNMENT((#543985)); +#543985 = SURFACE_STYLE_USAGE(.BOTH.,#543986); +#543986 = SURFACE_SIDE_STYLE('',(#543987)); +#543987 = SURFACE_STYLE_FILL_AREA(#543988); +#543988 = FILL_AREA_STYLE('',(#543989)); +#543989 = FILL_AREA_STYLE_COLOUR('',#543604); +#543990 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #543991),#495308); +#543991 = STYLED_ITEM('color',(#543992),#484115); +#543992 = PRESENTATION_STYLE_ASSIGNMENT((#543993)); +#543993 = SURFACE_STYLE_USAGE(.BOTH.,#543994); +#543994 = SURFACE_SIDE_STYLE('',(#543995,#543999)); +#543995 = SURFACE_STYLE_FILL_AREA(#543996); +#543996 = FILL_AREA_STYLE('',(#543997)); +#543997 = FILL_AREA_STYLE_COLOUR('',#543998); +#543998 = COLOUR_RGB('',7.251972705943E-02,0.467400056421,0.740755157142 + ); +#543999 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #543998,(#544000)); +#544000 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +#544001 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #544002,#544009,#544016,#544023,#544030,#544037,#544044,#544051, + #544058,#544065,#544072,#544079,#544086,#544093,#544100,#544107, + #544114,#544121,#544128,#544135,#544142,#544149,#544156,#544163, + #544170,#544177,#544184,#544191,#544198,#544205,#544212,#544219, + #544226,#544233,#544240,#544247,#544254,#544261,#544268,#544276, + #544283,#544290,#544297,#544304,#544311,#544318,#544325,#544332, + #544339,#544346,#544353,#544360,#544367,#544374,#544381,#544388, + #544395,#544402,#544409,#544416,#544423,#544430,#544437,#544444, + #544451,#544458,#544465,#544472,#544479,#544486,#544493,#544500, + #544507,#544514,#544521,#544528,#544535,#544542,#544549,#544556, + #544563,#544570,#544577,#544584,#544591,#544598,#544605,#544612, + #544619,#544626,#544633,#544640,#544647,#544654,#544661,#544668, + #544675,#544682,#544689,#544696,#544703,#544710,#544717,#544724, + #544731,#544738,#544745,#544752,#544759,#544766,#544773,#544780, + #544787,#544794,#544801,#544808,#544815,#544822,#544829,#544836, + #544843,#544850,#544857,#544864,#544871,#544878,#544885,#544892, + #544899,#544906,#544913,#544921,#544928,#544935,#544942,#544949), + #182958); +#544002 = STYLED_ITEM('color',(#544003),#178738); +#544003 = PRESENTATION_STYLE_ASSIGNMENT((#544004)); +#544004 = SURFACE_STYLE_USAGE(.BOTH.,#544005); +#544005 = SURFACE_SIDE_STYLE('',(#544006)); +#544006 = SURFACE_STYLE_FILL_AREA(#544007); +#544007 = FILL_AREA_STYLE('',(#544008)); +#544008 = FILL_AREA_STYLE_COLOUR('',#512538); +#544009 = STYLED_ITEM('color',(#544010),#178778); +#544010 = PRESENTATION_STYLE_ASSIGNMENT((#544011)); +#544011 = SURFACE_STYLE_USAGE(.BOTH.,#544012); +#544012 = SURFACE_SIDE_STYLE('',(#544013)); +#544013 = SURFACE_STYLE_FILL_AREA(#544014); +#544014 = FILL_AREA_STYLE('',(#544015)); +#544015 = FILL_AREA_STYLE_COLOUR('',#512538); +#544016 = STYLED_ITEM('color',(#544017),#178811); +#544017 = PRESENTATION_STYLE_ASSIGNMENT((#544018)); +#544018 = SURFACE_STYLE_USAGE(.BOTH.,#544019); +#544019 = SURFACE_SIDE_STYLE('',(#544020)); +#544020 = SURFACE_STYLE_FILL_AREA(#544021); +#544021 = FILL_AREA_STYLE('',(#544022)); +#544022 = FILL_AREA_STYLE_COLOUR('',#512538); +#544023 = STYLED_ITEM('color',(#544024),#178844); +#544024 = PRESENTATION_STYLE_ASSIGNMENT((#544025)); +#544025 = SURFACE_STYLE_USAGE(.BOTH.,#544026); +#544026 = SURFACE_SIDE_STYLE('',(#544027)); +#544027 = SURFACE_STYLE_FILL_AREA(#544028); +#544028 = FILL_AREA_STYLE('',(#544029)); +#544029 = FILL_AREA_STYLE_COLOUR('',#512538); +#544030 = STYLED_ITEM('color',(#544031),#178877); +#544031 = PRESENTATION_STYLE_ASSIGNMENT((#544032)); +#544032 = SURFACE_STYLE_USAGE(.BOTH.,#544033); +#544033 = SURFACE_SIDE_STYLE('',(#544034)); +#544034 = SURFACE_STYLE_FILL_AREA(#544035); +#544035 = FILL_AREA_STYLE('',(#544036)); +#544036 = FILL_AREA_STYLE_COLOUR('',#512538); +#544037 = STYLED_ITEM('color',(#544038),#178910); +#544038 = PRESENTATION_STYLE_ASSIGNMENT((#544039)); +#544039 = SURFACE_STYLE_USAGE(.BOTH.,#544040); +#544040 = SURFACE_SIDE_STYLE('',(#544041)); +#544041 = SURFACE_STYLE_FILL_AREA(#544042); +#544042 = FILL_AREA_STYLE('',(#544043)); +#544043 = FILL_AREA_STYLE_COLOUR('',#512538); +#544044 = STYLED_ITEM('color',(#544045),#178936); +#544045 = PRESENTATION_STYLE_ASSIGNMENT((#544046)); +#544046 = SURFACE_STYLE_USAGE(.BOTH.,#544047); +#544047 = SURFACE_SIDE_STYLE('',(#544048)); +#544048 = SURFACE_STYLE_FILL_AREA(#544049); +#544049 = FILL_AREA_STYLE('',(#544050)); +#544050 = FILL_AREA_STYLE_COLOUR('',#512538); +#544051 = STYLED_ITEM('color',(#544052),#178962); +#544052 = PRESENTATION_STYLE_ASSIGNMENT((#544053)); +#544053 = SURFACE_STYLE_USAGE(.BOTH.,#544054); +#544054 = SURFACE_SIDE_STYLE('',(#544055)); +#544055 = SURFACE_STYLE_FILL_AREA(#544056); +#544056 = FILL_AREA_STYLE('',(#544057)); +#544057 = FILL_AREA_STYLE_COLOUR('',#512538); +#544058 = STYLED_ITEM('color',(#544059),#178993); +#544059 = PRESENTATION_STYLE_ASSIGNMENT((#544060)); +#544060 = SURFACE_STYLE_USAGE(.BOTH.,#544061); +#544061 = SURFACE_SIDE_STYLE('',(#544062)); +#544062 = SURFACE_STYLE_FILL_AREA(#544063); +#544063 = FILL_AREA_STYLE('',(#544064)); +#544064 = FILL_AREA_STYLE_COLOUR('',#512538); +#544065 = STYLED_ITEM('color',(#544066),#179034); +#544066 = PRESENTATION_STYLE_ASSIGNMENT((#544067)); +#544067 = SURFACE_STYLE_USAGE(.BOTH.,#544068); +#544068 = SURFACE_SIDE_STYLE('',(#544069)); +#544069 = SURFACE_STYLE_FILL_AREA(#544070); +#544070 = FILL_AREA_STYLE('',(#544071)); +#544071 = FILL_AREA_STYLE_COLOUR('',#512538); +#544072 = STYLED_ITEM('color',(#544073),#179052); +#544073 = PRESENTATION_STYLE_ASSIGNMENT((#544074)); +#544074 = SURFACE_STYLE_USAGE(.BOTH.,#544075); +#544075 = SURFACE_SIDE_STYLE('',(#544076)); +#544076 = SURFACE_STYLE_FILL_AREA(#544077); +#544077 = FILL_AREA_STYLE('',(#544078)); +#544078 = FILL_AREA_STYLE_COLOUR('',#512538); +#544079 = STYLED_ITEM('color',(#544080),#179093); +#544080 = PRESENTATION_STYLE_ASSIGNMENT((#544081)); +#544081 = SURFACE_STYLE_USAGE(.BOTH.,#544082); +#544082 = SURFACE_SIDE_STYLE('',(#544083)); +#544083 = SURFACE_STYLE_FILL_AREA(#544084); +#544084 = FILL_AREA_STYLE('',(#544085)); +#544085 = FILL_AREA_STYLE_COLOUR('',#512538); +#544086 = STYLED_ITEM('color',(#544087),#179111); +#544087 = PRESENTATION_STYLE_ASSIGNMENT((#544088)); +#544088 = SURFACE_STYLE_USAGE(.BOTH.,#544089); +#544089 = SURFACE_SIDE_STYLE('',(#544090)); +#544090 = SURFACE_STYLE_FILL_AREA(#544091); +#544091 = FILL_AREA_STYLE('',(#544092)); +#544092 = FILL_AREA_STYLE_COLOUR('',#512538); +#544093 = STYLED_ITEM('color',(#544094),#179142); +#544094 = PRESENTATION_STYLE_ASSIGNMENT((#544095)); +#544095 = SURFACE_STYLE_USAGE(.BOTH.,#544096); +#544096 = SURFACE_SIDE_STYLE('',(#544097)); +#544097 = SURFACE_STYLE_FILL_AREA(#544098); +#544098 = FILL_AREA_STYLE('',(#544099)); +#544099 = FILL_AREA_STYLE_COLOUR('',#512538); +#544100 = STYLED_ITEM('color',(#544101),#179160); +#544101 = PRESENTATION_STYLE_ASSIGNMENT((#544102)); +#544102 = SURFACE_STYLE_USAGE(.BOTH.,#544103); +#544103 = SURFACE_SIDE_STYLE('',(#544104)); +#544104 = SURFACE_STYLE_FILL_AREA(#544105); +#544105 = FILL_AREA_STYLE('',(#544106)); +#544106 = FILL_AREA_STYLE_COLOUR('',#512538); +#544107 = STYLED_ITEM('color',(#544108),#179178); +#544108 = PRESENTATION_STYLE_ASSIGNMENT((#544109)); +#544109 = SURFACE_STYLE_USAGE(.BOTH.,#544110); +#544110 = SURFACE_SIDE_STYLE('',(#544111)); +#544111 = SURFACE_STYLE_FILL_AREA(#544112); +#544112 = FILL_AREA_STYLE('',(#544113)); +#544113 = FILL_AREA_STYLE_COLOUR('',#512538); +#544114 = STYLED_ITEM('color',(#544115),#179203); +#544115 = PRESENTATION_STYLE_ASSIGNMENT((#544116)); +#544116 = SURFACE_STYLE_USAGE(.BOTH.,#544117); +#544117 = SURFACE_SIDE_STYLE('',(#544118)); +#544118 = SURFACE_STYLE_FILL_AREA(#544119); +#544119 = FILL_AREA_STYLE('',(#544120)); +#544120 = FILL_AREA_STYLE_COLOUR('',#512538); +#544121 = STYLED_ITEM('color',(#544122),#179221); +#544122 = PRESENTATION_STYLE_ASSIGNMENT((#544123)); +#544123 = SURFACE_STYLE_USAGE(.BOTH.,#544124); +#544124 = SURFACE_SIDE_STYLE('',(#544125)); +#544125 = SURFACE_STYLE_FILL_AREA(#544126); +#544126 = FILL_AREA_STYLE('',(#544127)); +#544127 = FILL_AREA_STYLE_COLOUR('',#512538); +#544128 = STYLED_ITEM('color',(#544129),#179233); +#544129 = PRESENTATION_STYLE_ASSIGNMENT((#544130)); +#544130 = SURFACE_STYLE_USAGE(.BOTH.,#544131); +#544131 = SURFACE_SIDE_STYLE('',(#544132)); +#544132 = SURFACE_STYLE_FILL_AREA(#544133); +#544133 = FILL_AREA_STYLE('',(#544134)); +#544134 = FILL_AREA_STYLE_COLOUR('',#512538); +#544135 = STYLED_ITEM('color',(#544136),#179247); +#544136 = PRESENTATION_STYLE_ASSIGNMENT((#544137)); +#544137 = SURFACE_STYLE_USAGE(.BOTH.,#544138); +#544138 = SURFACE_SIDE_STYLE('',(#544139)); +#544139 = SURFACE_STYLE_FILL_AREA(#544140); +#544140 = FILL_AREA_STYLE('',(#544141)); +#544141 = FILL_AREA_STYLE_COLOUR('',#512538); +#544142 = STYLED_ITEM('color',(#544143),#179287); +#544143 = PRESENTATION_STYLE_ASSIGNMENT((#544144)); +#544144 = SURFACE_STYLE_USAGE(.BOTH.,#544145); +#544145 = SURFACE_SIDE_STYLE('',(#544146)); +#544146 = SURFACE_STYLE_FILL_AREA(#544147); +#544147 = FILL_AREA_STYLE('',(#544148)); +#544148 = FILL_AREA_STYLE_COLOUR('',#512538); +#544149 = STYLED_ITEM('color',(#544150),#179320); +#544150 = PRESENTATION_STYLE_ASSIGNMENT((#544151)); +#544151 = SURFACE_STYLE_USAGE(.BOTH.,#544152); +#544152 = SURFACE_SIDE_STYLE('',(#544153)); +#544153 = SURFACE_STYLE_FILL_AREA(#544154); +#544154 = FILL_AREA_STYLE('',(#544155)); +#544155 = FILL_AREA_STYLE_COLOUR('',#512538); +#544156 = STYLED_ITEM('color',(#544157),#179353); +#544157 = PRESENTATION_STYLE_ASSIGNMENT((#544158)); +#544158 = SURFACE_STYLE_USAGE(.BOTH.,#544159); +#544159 = SURFACE_SIDE_STYLE('',(#544160)); +#544160 = SURFACE_STYLE_FILL_AREA(#544161); +#544161 = FILL_AREA_STYLE('',(#544162)); +#544162 = FILL_AREA_STYLE_COLOUR('',#512538); +#544163 = STYLED_ITEM('color',(#544164),#179386); +#544164 = PRESENTATION_STYLE_ASSIGNMENT((#544165)); +#544165 = SURFACE_STYLE_USAGE(.BOTH.,#544166); +#544166 = SURFACE_SIDE_STYLE('',(#544167)); +#544167 = SURFACE_STYLE_FILL_AREA(#544168); +#544168 = FILL_AREA_STYLE('',(#544169)); +#544169 = FILL_AREA_STYLE_COLOUR('',#512538); +#544170 = STYLED_ITEM('color',(#544171),#179427); +#544171 = PRESENTATION_STYLE_ASSIGNMENT((#544172)); +#544172 = SURFACE_STYLE_USAGE(.BOTH.,#544173); +#544173 = SURFACE_SIDE_STYLE('',(#544174)); +#544174 = SURFACE_STYLE_FILL_AREA(#544175); +#544175 = FILL_AREA_STYLE('',(#544176)); +#544176 = FILL_AREA_STYLE_COLOUR('',#512538); +#544177 = STYLED_ITEM('color',(#544178),#179458); +#544178 = PRESENTATION_STYLE_ASSIGNMENT((#544179)); +#544179 = SURFACE_STYLE_USAGE(.BOTH.,#544180); +#544180 = SURFACE_SIDE_STYLE('',(#544181)); +#544181 = SURFACE_STYLE_FILL_AREA(#544182); +#544182 = FILL_AREA_STYLE('',(#544183)); +#544183 = FILL_AREA_STYLE_COLOUR('',#512538); +#544184 = STYLED_ITEM('color',(#544185),#179484); +#544185 = PRESENTATION_STYLE_ASSIGNMENT((#544186)); +#544186 = SURFACE_STYLE_USAGE(.BOTH.,#544187); +#544187 = SURFACE_SIDE_STYLE('',(#544188)); +#544188 = SURFACE_STYLE_FILL_AREA(#544189); +#544189 = FILL_AREA_STYLE('',(#544190)); +#544190 = FILL_AREA_STYLE_COLOUR('',#512538); +#544191 = STYLED_ITEM('color',(#544192),#179510); +#544192 = PRESENTATION_STYLE_ASSIGNMENT((#544193)); +#544193 = SURFACE_STYLE_USAGE(.BOTH.,#544194); +#544194 = SURFACE_SIDE_STYLE('',(#544195)); +#544195 = SURFACE_STYLE_FILL_AREA(#544196); +#544196 = FILL_AREA_STYLE('',(#544197)); +#544197 = FILL_AREA_STYLE_COLOUR('',#512538); +#544198 = STYLED_ITEM('color',(#544199),#179551); +#544199 = PRESENTATION_STYLE_ASSIGNMENT((#544200)); +#544200 = SURFACE_STYLE_USAGE(.BOTH.,#544201); +#544201 = SURFACE_SIDE_STYLE('',(#544202)); +#544202 = SURFACE_STYLE_FILL_AREA(#544203); +#544203 = FILL_AREA_STYLE('',(#544204)); +#544204 = FILL_AREA_STYLE_COLOUR('',#512538); +#544205 = STYLED_ITEM('color',(#544206),#179569); +#544206 = PRESENTATION_STYLE_ASSIGNMENT((#544207)); +#544207 = SURFACE_STYLE_USAGE(.BOTH.,#544208); +#544208 = SURFACE_SIDE_STYLE('',(#544209)); +#544209 = SURFACE_STYLE_FILL_AREA(#544210); +#544210 = FILL_AREA_STYLE('',(#544211)); +#544211 = FILL_AREA_STYLE_COLOUR('',#512538); +#544212 = STYLED_ITEM('color',(#544213),#179603); +#544213 = PRESENTATION_STYLE_ASSIGNMENT((#544214)); +#544214 = SURFACE_STYLE_USAGE(.BOTH.,#544215); +#544215 = SURFACE_SIDE_STYLE('',(#544216)); +#544216 = SURFACE_STYLE_FILL_AREA(#544217); +#544217 = FILL_AREA_STYLE('',(#544218)); +#544218 = FILL_AREA_STYLE_COLOUR('',#512538); +#544219 = STYLED_ITEM('color',(#544220),#179634); +#544220 = PRESENTATION_STYLE_ASSIGNMENT((#544221)); +#544221 = SURFACE_STYLE_USAGE(.BOTH.,#544222); +#544222 = SURFACE_SIDE_STYLE('',(#544223)); +#544223 = SURFACE_STYLE_FILL_AREA(#544224); +#544224 = FILL_AREA_STYLE('',(#544225)); +#544225 = FILL_AREA_STYLE_COLOUR('',#512538); +#544226 = STYLED_ITEM('color',(#544227),#179652); +#544227 = PRESENTATION_STYLE_ASSIGNMENT((#544228)); +#544228 = SURFACE_STYLE_USAGE(.BOTH.,#544229); +#544229 = SURFACE_SIDE_STYLE('',(#544230)); +#544230 = SURFACE_STYLE_FILL_AREA(#544231); +#544231 = FILL_AREA_STYLE('',(#544232)); +#544232 = FILL_AREA_STYLE_COLOUR('',#512538); +#544233 = STYLED_ITEM('color',(#544234),#179676); +#544234 = PRESENTATION_STYLE_ASSIGNMENT((#544235)); +#544235 = SURFACE_STYLE_USAGE(.BOTH.,#544236); +#544236 = SURFACE_SIDE_STYLE('',(#544237)); +#544237 = SURFACE_STYLE_FILL_AREA(#544238); +#544238 = FILL_AREA_STYLE('',(#544239)); +#544239 = FILL_AREA_STYLE_COLOUR('',#512538); +#544240 = STYLED_ITEM('color',(#544241),#179694); +#544241 = PRESENTATION_STYLE_ASSIGNMENT((#544242)); +#544242 = SURFACE_STYLE_USAGE(.BOTH.,#544243); +#544243 = SURFACE_SIDE_STYLE('',(#544244)); +#544244 = SURFACE_STYLE_FILL_AREA(#544245); +#544245 = FILL_AREA_STYLE('',(#544246)); +#544246 = FILL_AREA_STYLE_COLOUR('',#512538); +#544247 = STYLED_ITEM('color',(#544248),#179712); +#544248 = PRESENTATION_STYLE_ASSIGNMENT((#544249)); +#544249 = SURFACE_STYLE_USAGE(.BOTH.,#544250); +#544250 = SURFACE_SIDE_STYLE('',(#544251)); +#544251 = SURFACE_STYLE_FILL_AREA(#544252); +#544252 = FILL_AREA_STYLE('',(#544253)); +#544253 = FILL_AREA_STYLE_COLOUR('',#512538); +#544254 = STYLED_ITEM('color',(#544255),#179730); +#544255 = PRESENTATION_STYLE_ASSIGNMENT((#544256)); +#544256 = SURFACE_STYLE_USAGE(.BOTH.,#544257); +#544257 = SURFACE_SIDE_STYLE('',(#544258)); +#544258 = SURFACE_STYLE_FILL_AREA(#544259); +#544259 = FILL_AREA_STYLE('',(#544260)); +#544260 = FILL_AREA_STYLE_COLOUR('',#512538); +#544261 = STYLED_ITEM('color',(#544262),#179742); +#544262 = PRESENTATION_STYLE_ASSIGNMENT((#544263)); +#544263 = SURFACE_STYLE_USAGE(.BOTH.,#544264); +#544264 = SURFACE_SIDE_STYLE('',(#544265)); +#544265 = SURFACE_STYLE_FILL_AREA(#544266); +#544266 = FILL_AREA_STYLE('',(#544267)); +#544267 = FILL_AREA_STYLE_COLOUR('',#512538); +#544268 = STYLED_ITEM('color',(#544269),#179756); +#544269 = PRESENTATION_STYLE_ASSIGNMENT((#544270)); +#544270 = SURFACE_STYLE_USAGE(.BOTH.,#544271); +#544271 = SURFACE_SIDE_STYLE('',(#544272)); +#544272 = SURFACE_STYLE_FILL_AREA(#544273); +#544273 = FILL_AREA_STYLE('',(#544274)); +#544274 = FILL_AREA_STYLE_COLOUR('',#544275); +#544275 = COLOUR_RGB('',0.272999999305,0.272999999305,0.272999999305); +#544276 = STYLED_ITEM('color',(#544277),#179798); +#544277 = PRESENTATION_STYLE_ASSIGNMENT((#544278)); +#544278 = SURFACE_STYLE_USAGE(.BOTH.,#544279); +#544279 = SURFACE_SIDE_STYLE('',(#544280)); +#544280 = SURFACE_STYLE_FILL_AREA(#544281); +#544281 = FILL_AREA_STYLE('',(#544282)); +#544282 = FILL_AREA_STYLE_COLOUR('',#544275); +#544283 = STYLED_ITEM('color',(#544284),#179829); +#544284 = PRESENTATION_STYLE_ASSIGNMENT((#544285)); +#544285 = SURFACE_STYLE_USAGE(.BOTH.,#544286); +#544286 = SURFACE_SIDE_STYLE('',(#544287)); +#544287 = SURFACE_STYLE_FILL_AREA(#544288); +#544288 = FILL_AREA_STYLE('',(#544289)); +#544289 = FILL_AREA_STYLE_COLOUR('',#544275); +#544290 = STYLED_ITEM('color',(#544291),#179854); +#544291 = PRESENTATION_STYLE_ASSIGNMENT((#544292)); +#544292 = SURFACE_STYLE_USAGE(.BOTH.,#544293); +#544293 = SURFACE_SIDE_STYLE('',(#544294)); +#544294 = SURFACE_STYLE_FILL_AREA(#544295); +#544295 = FILL_AREA_STYLE('',(#544296)); +#544296 = FILL_AREA_STYLE_COLOUR('',#544275); +#544297 = STYLED_ITEM('color',(#544298),#179903); +#544298 = PRESENTATION_STYLE_ASSIGNMENT((#544299)); +#544299 = SURFACE_STYLE_USAGE(.BOTH.,#544300); +#544300 = SURFACE_SIDE_STYLE('',(#544301)); +#544301 = SURFACE_STYLE_FILL_AREA(#544302); +#544302 = FILL_AREA_STYLE('',(#544303)); +#544303 = FILL_AREA_STYLE_COLOUR('',#544275); +#544304 = STYLED_ITEM('color',(#544305),#179934); +#544305 = PRESENTATION_STYLE_ASSIGNMENT((#544306)); +#544306 = SURFACE_STYLE_USAGE(.BOTH.,#544307); +#544307 = SURFACE_SIDE_STYLE('',(#544308)); +#544308 = SURFACE_STYLE_FILL_AREA(#544309); +#544309 = FILL_AREA_STYLE('',(#544310)); +#544310 = FILL_AREA_STYLE_COLOUR('',#544275); +#544311 = STYLED_ITEM('color',(#544312),#179959); +#544312 = PRESENTATION_STYLE_ASSIGNMENT((#544313)); +#544313 = SURFACE_STYLE_USAGE(.BOTH.,#544314); +#544314 = SURFACE_SIDE_STYLE('',(#544315)); +#544315 = SURFACE_STYLE_FILL_AREA(#544316); +#544316 = FILL_AREA_STYLE('',(#544317)); +#544317 = FILL_AREA_STYLE_COLOUR('',#544275); +#544318 = STYLED_ITEM('color',(#544319),#179982); +#544319 = PRESENTATION_STYLE_ASSIGNMENT((#544320)); +#544320 = SURFACE_STYLE_USAGE(.BOTH.,#544321); +#544321 = SURFACE_SIDE_STYLE('',(#544322)); +#544322 = SURFACE_STYLE_FILL_AREA(#544323); +#544323 = FILL_AREA_STYLE('',(#544324)); +#544324 = FILL_AREA_STYLE_COLOUR('',#544275); +#544325 = STYLED_ITEM('color',(#544326),#180015); +#544326 = PRESENTATION_STYLE_ASSIGNMENT((#544327)); +#544327 = SURFACE_STYLE_USAGE(.BOTH.,#544328); +#544328 = SURFACE_SIDE_STYLE('',(#544329)); +#544329 = SURFACE_STYLE_FILL_AREA(#544330); +#544330 = FILL_AREA_STYLE('',(#544331)); +#544331 = FILL_AREA_STYLE_COLOUR('',#544275); +#544332 = STYLED_ITEM('color',(#544333),#180040); +#544333 = PRESENTATION_STYLE_ASSIGNMENT((#544334)); +#544334 = SURFACE_STYLE_USAGE(.BOTH.,#544335); +#544335 = SURFACE_SIDE_STYLE('',(#544336)); +#544336 = SURFACE_STYLE_FILL_AREA(#544337); +#544337 = FILL_AREA_STYLE('',(#544338)); +#544338 = FILL_AREA_STYLE_COLOUR('',#544275); +#544339 = STYLED_ITEM('color',(#544340),#180169); +#544340 = PRESENTATION_STYLE_ASSIGNMENT((#544341)); +#544341 = SURFACE_STYLE_USAGE(.BOTH.,#544342); +#544342 = SURFACE_SIDE_STYLE('',(#544343)); +#544343 = SURFACE_STYLE_FILL_AREA(#544344); +#544344 = FILL_AREA_STYLE('',(#544345)); +#544345 = FILL_AREA_STYLE_COLOUR('',#544275); +#544346 = STYLED_ITEM('color',(#544347),#180209); +#544347 = PRESENTATION_STYLE_ASSIGNMENT((#544348)); +#544348 = SURFACE_STYLE_USAGE(.BOTH.,#544349); +#544349 = SURFACE_SIDE_STYLE('',(#544350)); +#544350 = SURFACE_STYLE_FILL_AREA(#544351); +#544351 = FILL_AREA_STYLE('',(#544352)); +#544352 = FILL_AREA_STYLE_COLOUR('',#544275); +#544353 = STYLED_ITEM('color',(#544354),#180225); +#544354 = PRESENTATION_STYLE_ASSIGNMENT((#544355)); +#544355 = SURFACE_STYLE_USAGE(.BOTH.,#544356); +#544356 = SURFACE_SIDE_STYLE('',(#544357)); +#544357 = SURFACE_STYLE_FILL_AREA(#544358); +#544358 = FILL_AREA_STYLE('',(#544359)); +#544359 = FILL_AREA_STYLE_COLOUR('',#544275); +#544360 = STYLED_ITEM('color',(#544361),#180258); +#544361 = PRESENTATION_STYLE_ASSIGNMENT((#544362)); +#544362 = SURFACE_STYLE_USAGE(.BOTH.,#544363); +#544363 = SURFACE_SIDE_STYLE('',(#544364)); +#544364 = SURFACE_STYLE_FILL_AREA(#544365); +#544365 = FILL_AREA_STYLE('',(#544366)); +#544366 = FILL_AREA_STYLE_COLOUR('',#544275); +#544367 = STYLED_ITEM('color',(#544368),#180418); +#544368 = PRESENTATION_STYLE_ASSIGNMENT((#544369)); +#544369 = SURFACE_STYLE_USAGE(.BOTH.,#544370); +#544370 = SURFACE_SIDE_STYLE('',(#544371)); +#544371 = SURFACE_STYLE_FILL_AREA(#544372); +#544372 = FILL_AREA_STYLE('',(#544373)); +#544373 = FILL_AREA_STYLE_COLOUR('',#544275); +#544374 = STYLED_ITEM('color',(#544375),#180435); +#544375 = PRESENTATION_STYLE_ASSIGNMENT((#544376)); +#544376 = SURFACE_STYLE_USAGE(.BOTH.,#544377); +#544377 = SURFACE_SIDE_STYLE('',(#544378)); +#544378 = SURFACE_STYLE_FILL_AREA(#544379); +#544379 = FILL_AREA_STYLE('',(#544380)); +#544380 = FILL_AREA_STYLE_COLOUR('',#544275); +#544381 = STYLED_ITEM('color',(#544382),#180471); +#544382 = PRESENTATION_STYLE_ASSIGNMENT((#544383)); +#544383 = SURFACE_STYLE_USAGE(.BOTH.,#544384); +#544384 = SURFACE_SIDE_STYLE('',(#544385)); +#544385 = SURFACE_STYLE_FILL_AREA(#544386); +#544386 = FILL_AREA_STYLE('',(#544387)); +#544387 = FILL_AREA_STYLE_COLOUR('',#544275); +#544388 = STYLED_ITEM('color',(#544389),#180502); +#544389 = PRESENTATION_STYLE_ASSIGNMENT((#544390)); +#544390 = SURFACE_STYLE_USAGE(.BOTH.,#544391); +#544391 = SURFACE_SIDE_STYLE('',(#544392)); +#544392 = SURFACE_STYLE_FILL_AREA(#544393); +#544393 = FILL_AREA_STYLE('',(#544394)); +#544394 = FILL_AREA_STYLE_COLOUR('',#544275); +#544395 = STYLED_ITEM('color',(#544396),#180520); +#544396 = PRESENTATION_STYLE_ASSIGNMENT((#544397)); +#544397 = SURFACE_STYLE_USAGE(.BOTH.,#544398); +#544398 = SURFACE_SIDE_STYLE('',(#544399)); +#544399 = SURFACE_STYLE_FILL_AREA(#544400); +#544400 = FILL_AREA_STYLE('',(#544401)); +#544401 = FILL_AREA_STYLE_COLOUR('',#544275); +#544402 = STYLED_ITEM('color',(#544403),#180562); +#544403 = PRESENTATION_STYLE_ASSIGNMENT((#544404)); +#544404 = SURFACE_STYLE_USAGE(.BOTH.,#544405); +#544405 = SURFACE_SIDE_STYLE('',(#544406)); +#544406 = SURFACE_STYLE_FILL_AREA(#544407); +#544407 = FILL_AREA_STYLE('',(#544408)); +#544408 = FILL_AREA_STYLE_COLOUR('',#544275); +#544409 = STYLED_ITEM('color',(#544410),#180592); +#544410 = PRESENTATION_STYLE_ASSIGNMENT((#544411)); +#544411 = SURFACE_STYLE_USAGE(.BOTH.,#544412); +#544412 = SURFACE_SIDE_STYLE('',(#544413)); +#544413 = SURFACE_STYLE_FILL_AREA(#544414); +#544414 = FILL_AREA_STYLE('',(#544415)); +#544415 = FILL_AREA_STYLE_COLOUR('',#544275); +#544416 = STYLED_ITEM('color',(#544417),#180615); +#544417 = PRESENTATION_STYLE_ASSIGNMENT((#544418)); +#544418 = SURFACE_STYLE_USAGE(.BOTH.,#544419); +#544419 = SURFACE_SIDE_STYLE('',(#544420)); +#544420 = SURFACE_STYLE_FILL_AREA(#544421); +#544421 = FILL_AREA_STYLE('',(#544422)); +#544422 = FILL_AREA_STYLE_COLOUR('',#544275); +#544423 = STYLED_ITEM('color',(#544424),#180651); +#544424 = PRESENTATION_STYLE_ASSIGNMENT((#544425)); +#544425 = SURFACE_STYLE_USAGE(.BOTH.,#544426); +#544426 = SURFACE_SIDE_STYLE('',(#544427)); +#544427 = SURFACE_STYLE_FILL_AREA(#544428); +#544428 = FILL_AREA_STYLE('',(#544429)); +#544429 = FILL_AREA_STYLE_COLOUR('',#544275); +#544430 = STYLED_ITEM('color',(#544431),#180674); +#544431 = PRESENTATION_STYLE_ASSIGNMENT((#544432)); +#544432 = SURFACE_STYLE_USAGE(.BOTH.,#544433); +#544433 = SURFACE_SIDE_STYLE('',(#544434)); +#544434 = SURFACE_STYLE_FILL_AREA(#544435); +#544435 = FILL_AREA_STYLE('',(#544436)); +#544436 = FILL_AREA_STYLE_COLOUR('',#544275); +#544437 = STYLED_ITEM('color',(#544438),#180718); +#544438 = PRESENTATION_STYLE_ASSIGNMENT((#544439)); +#544439 = SURFACE_STYLE_USAGE(.BOTH.,#544440); +#544440 = SURFACE_SIDE_STYLE('',(#544441)); +#544441 = SURFACE_STYLE_FILL_AREA(#544442); +#544442 = FILL_AREA_STYLE('',(#544443)); +#544443 = FILL_AREA_STYLE_COLOUR('',#544275); +#544444 = STYLED_ITEM('color',(#544445),#180742); +#544445 = PRESENTATION_STYLE_ASSIGNMENT((#544446)); +#544446 = SURFACE_STYLE_USAGE(.BOTH.,#544447); +#544447 = SURFACE_SIDE_STYLE('',(#544448)); +#544448 = SURFACE_STYLE_FILL_AREA(#544449); +#544449 = FILL_AREA_STYLE('',(#544450)); +#544450 = FILL_AREA_STYLE_COLOUR('',#544275); +#544451 = STYLED_ITEM('color',(#544452),#180770); +#544452 = PRESENTATION_STYLE_ASSIGNMENT((#544453)); +#544453 = SURFACE_STYLE_USAGE(.BOTH.,#544454); +#544454 = SURFACE_SIDE_STYLE('',(#544455)); +#544455 = SURFACE_STYLE_FILL_AREA(#544456); +#544456 = FILL_AREA_STYLE('',(#544457)); +#544457 = FILL_AREA_STYLE_COLOUR('',#544275); +#544458 = STYLED_ITEM('color',(#544459),#180793); +#544459 = PRESENTATION_STYLE_ASSIGNMENT((#544460)); +#544460 = SURFACE_STYLE_USAGE(.BOTH.,#544461); +#544461 = SURFACE_SIDE_STYLE('',(#544462)); +#544462 = SURFACE_STYLE_FILL_AREA(#544463); +#544463 = FILL_AREA_STYLE('',(#544464)); +#544464 = FILL_AREA_STYLE_COLOUR('',#544275); +#544465 = STYLED_ITEM('color',(#544466),#180823); +#544466 = PRESENTATION_STYLE_ASSIGNMENT((#544467)); +#544467 = SURFACE_STYLE_USAGE(.BOTH.,#544468); +#544468 = SURFACE_SIDE_STYLE('',(#544469)); +#544469 = SURFACE_STYLE_FILL_AREA(#544470); +#544470 = FILL_AREA_STYLE('',(#544471)); +#544471 = FILL_AREA_STYLE_COLOUR('',#544275); +#544472 = STYLED_ITEM('color',(#544473),#180859); +#544473 = PRESENTATION_STYLE_ASSIGNMENT((#544474)); +#544474 = SURFACE_STYLE_USAGE(.BOTH.,#544475); +#544475 = SURFACE_SIDE_STYLE('',(#544476)); +#544476 = SURFACE_STYLE_FILL_AREA(#544477); +#544477 = FILL_AREA_STYLE('',(#544478)); +#544478 = FILL_AREA_STYLE_COLOUR('',#544275); +#544479 = STYLED_ITEM('color',(#544480),#180889); +#544480 = PRESENTATION_STYLE_ASSIGNMENT((#544481)); +#544481 = SURFACE_STYLE_USAGE(.BOTH.,#544482); +#544482 = SURFACE_SIDE_STYLE('',(#544483)); +#544483 = SURFACE_STYLE_FILL_AREA(#544484); +#544484 = FILL_AREA_STYLE('',(#544485)); +#544485 = FILL_AREA_STYLE_COLOUR('',#544275); +#544486 = STYLED_ITEM('color',(#544487),#180912); +#544487 = PRESENTATION_STYLE_ASSIGNMENT((#544488)); +#544488 = SURFACE_STYLE_USAGE(.BOTH.,#544489); +#544489 = SURFACE_SIDE_STYLE('',(#544490)); +#544490 = SURFACE_STYLE_FILL_AREA(#544491); +#544491 = FILL_AREA_STYLE('',(#544492)); +#544492 = FILL_AREA_STYLE_COLOUR('',#544275); +#544493 = STYLED_ITEM('color',(#544494),#180936); +#544494 = PRESENTATION_STYLE_ASSIGNMENT((#544495)); +#544495 = SURFACE_STYLE_USAGE(.BOTH.,#544496); +#544496 = SURFACE_SIDE_STYLE('',(#544497)); +#544497 = SURFACE_STYLE_FILL_AREA(#544498); +#544498 = FILL_AREA_STYLE('',(#544499)); +#544499 = FILL_AREA_STYLE_COLOUR('',#544275); +#544500 = STYLED_ITEM('color',(#544501),#180969); +#544501 = PRESENTATION_STYLE_ASSIGNMENT((#544502)); +#544502 = SURFACE_STYLE_USAGE(.BOTH.,#544503); +#544503 = SURFACE_SIDE_STYLE('',(#544504)); +#544504 = SURFACE_STYLE_FILL_AREA(#544505); +#544505 = FILL_AREA_STYLE('',(#544506)); +#544506 = FILL_AREA_STYLE_COLOUR('',#544275); +#544507 = STYLED_ITEM('color',(#544508),#181000); +#544508 = PRESENTATION_STYLE_ASSIGNMENT((#544509)); +#544509 = SURFACE_STYLE_USAGE(.BOTH.,#544510); +#544510 = SURFACE_SIDE_STYLE('',(#544511)); +#544511 = SURFACE_STYLE_FILL_AREA(#544512); +#544512 = FILL_AREA_STYLE('',(#544513)); +#544513 = FILL_AREA_STYLE_COLOUR('',#544275); +#544514 = STYLED_ITEM('color',(#544515),#181024); +#544515 = PRESENTATION_STYLE_ASSIGNMENT((#544516)); +#544516 = SURFACE_STYLE_USAGE(.BOTH.,#544517); +#544517 = SURFACE_SIDE_STYLE('',(#544518)); +#544518 = SURFACE_STYLE_FILL_AREA(#544519); +#544519 = FILL_AREA_STYLE('',(#544520)); +#544520 = FILL_AREA_STYLE_COLOUR('',#544275); +#544521 = STYLED_ITEM('color',(#544522),#181042); +#544522 = PRESENTATION_STYLE_ASSIGNMENT((#544523)); +#544523 = SURFACE_STYLE_USAGE(.BOTH.,#544524); +#544524 = SURFACE_SIDE_STYLE('',(#544525)); +#544525 = SURFACE_STYLE_FILL_AREA(#544526); +#544526 = FILL_AREA_STYLE('',(#544527)); +#544527 = FILL_AREA_STYLE_COLOUR('',#544275); +#544528 = STYLED_ITEM('color',(#544529),#181068); +#544529 = PRESENTATION_STYLE_ASSIGNMENT((#544530)); +#544530 = SURFACE_STYLE_USAGE(.BOTH.,#544531); +#544531 = SURFACE_SIDE_STYLE('',(#544532)); +#544532 = SURFACE_STYLE_FILL_AREA(#544533); +#544533 = FILL_AREA_STYLE('',(#544534)); +#544534 = FILL_AREA_STYLE_COLOUR('',#544275); +#544535 = STYLED_ITEM('color',(#544536),#181093); +#544536 = PRESENTATION_STYLE_ASSIGNMENT((#544537)); +#544537 = SURFACE_STYLE_USAGE(.BOTH.,#544538); +#544538 = SURFACE_SIDE_STYLE('',(#544539)); +#544539 = SURFACE_STYLE_FILL_AREA(#544540); +#544540 = FILL_AREA_STYLE('',(#544541)); +#544541 = FILL_AREA_STYLE_COLOUR('',#544275); +#544542 = STYLED_ITEM('color',(#544543),#181119); +#544543 = PRESENTATION_STYLE_ASSIGNMENT((#544544)); +#544544 = SURFACE_STYLE_USAGE(.BOTH.,#544545); +#544545 = SURFACE_SIDE_STYLE('',(#544546)); +#544546 = SURFACE_STYLE_FILL_AREA(#544547); +#544547 = FILL_AREA_STYLE('',(#544548)); +#544548 = FILL_AREA_STYLE_COLOUR('',#544275); +#544549 = STYLED_ITEM('color',(#544550),#181137); +#544550 = PRESENTATION_STYLE_ASSIGNMENT((#544551)); +#544551 = SURFACE_STYLE_USAGE(.BOTH.,#544552); +#544552 = SURFACE_SIDE_STYLE('',(#544553)); +#544553 = SURFACE_STYLE_FILL_AREA(#544554); +#544554 = FILL_AREA_STYLE('',(#544555)); +#544555 = FILL_AREA_STYLE_COLOUR('',#544275); +#544556 = STYLED_ITEM('color',(#544557),#181162); +#544557 = PRESENTATION_STYLE_ASSIGNMENT((#544558)); +#544558 = SURFACE_STYLE_USAGE(.BOTH.,#544559); +#544559 = SURFACE_SIDE_STYLE('',(#544560)); +#544560 = SURFACE_STYLE_FILL_AREA(#544561); +#544561 = FILL_AREA_STYLE('',(#544562)); +#544562 = FILL_AREA_STYLE_COLOUR('',#544275); +#544563 = STYLED_ITEM('color',(#544564),#181188); +#544564 = PRESENTATION_STYLE_ASSIGNMENT((#544565)); +#544565 = SURFACE_STYLE_USAGE(.BOTH.,#544566); +#544566 = SURFACE_SIDE_STYLE('',(#544567)); +#544567 = SURFACE_STYLE_FILL_AREA(#544568); +#544568 = FILL_AREA_STYLE('',(#544569)); +#544569 = FILL_AREA_STYLE_COLOUR('',#544275); +#544570 = STYLED_ITEM('color',(#544571),#181214); +#544571 = PRESENTATION_STYLE_ASSIGNMENT((#544572)); +#544572 = SURFACE_STYLE_USAGE(.BOTH.,#544573); +#544573 = SURFACE_SIDE_STYLE('',(#544574)); +#544574 = SURFACE_STYLE_FILL_AREA(#544575); +#544575 = FILL_AREA_STYLE('',(#544576)); +#544576 = FILL_AREA_STYLE_COLOUR('',#544275); +#544577 = STYLED_ITEM('color',(#544578),#181239); +#544578 = PRESENTATION_STYLE_ASSIGNMENT((#544579)); +#544579 = SURFACE_STYLE_USAGE(.BOTH.,#544580); +#544580 = SURFACE_SIDE_STYLE('',(#544581)); +#544581 = SURFACE_STYLE_FILL_AREA(#544582); +#544582 = FILL_AREA_STYLE('',(#544583)); +#544583 = FILL_AREA_STYLE_COLOUR('',#544275); +#544584 = STYLED_ITEM('color',(#544585),#181264); +#544585 = PRESENTATION_STYLE_ASSIGNMENT((#544586)); +#544586 = SURFACE_STYLE_USAGE(.BOTH.,#544587); +#544587 = SURFACE_SIDE_STYLE('',(#544588)); +#544588 = SURFACE_STYLE_FILL_AREA(#544589); +#544589 = FILL_AREA_STYLE('',(#544590)); +#544590 = FILL_AREA_STYLE_COLOUR('',#544275); +#544591 = STYLED_ITEM('color',(#544592),#181290); +#544592 = PRESENTATION_STYLE_ASSIGNMENT((#544593)); +#544593 = SURFACE_STYLE_USAGE(.BOTH.,#544594); +#544594 = SURFACE_SIDE_STYLE('',(#544595)); +#544595 = SURFACE_STYLE_FILL_AREA(#544596); +#544596 = FILL_AREA_STYLE('',(#544597)); +#544597 = FILL_AREA_STYLE_COLOUR('',#544275); +#544598 = STYLED_ITEM('color',(#544599),#181316); +#544599 = PRESENTATION_STYLE_ASSIGNMENT((#544600)); +#544600 = SURFACE_STYLE_USAGE(.BOTH.,#544601); +#544601 = SURFACE_SIDE_STYLE('',(#544602)); +#544602 = SURFACE_STYLE_FILL_AREA(#544603); +#544603 = FILL_AREA_STYLE('',(#544604)); +#544604 = FILL_AREA_STYLE_COLOUR('',#544275); +#544605 = STYLED_ITEM('color',(#544606),#181341); +#544606 = PRESENTATION_STYLE_ASSIGNMENT((#544607)); +#544607 = SURFACE_STYLE_USAGE(.BOTH.,#544608); +#544608 = SURFACE_SIDE_STYLE('',(#544609)); +#544609 = SURFACE_STYLE_FILL_AREA(#544610); +#544610 = FILL_AREA_STYLE('',(#544611)); +#544611 = FILL_AREA_STYLE_COLOUR('',#544275); +#544612 = STYLED_ITEM('color',(#544613),#181366); +#544613 = PRESENTATION_STYLE_ASSIGNMENT((#544614)); +#544614 = SURFACE_STYLE_USAGE(.BOTH.,#544615); +#544615 = SURFACE_SIDE_STYLE('',(#544616)); +#544616 = SURFACE_STYLE_FILL_AREA(#544617); +#544617 = FILL_AREA_STYLE('',(#544618)); +#544618 = FILL_AREA_STYLE_COLOUR('',#544275); +#544619 = STYLED_ITEM('color',(#544620),#181392); +#544620 = PRESENTATION_STYLE_ASSIGNMENT((#544621)); +#544621 = SURFACE_STYLE_USAGE(.BOTH.,#544622); +#544622 = SURFACE_SIDE_STYLE('',(#544623)); +#544623 = SURFACE_STYLE_FILL_AREA(#544624); +#544624 = FILL_AREA_STYLE('',(#544625)); +#544625 = FILL_AREA_STYLE_COLOUR('',#544275); +#544626 = STYLED_ITEM('color',(#544627),#181425); +#544627 = PRESENTATION_STYLE_ASSIGNMENT((#544628)); +#544628 = SURFACE_STYLE_USAGE(.BOTH.,#544629); +#544629 = SURFACE_SIDE_STYLE('',(#544630)); +#544630 = SURFACE_STYLE_FILL_AREA(#544631); +#544631 = FILL_AREA_STYLE('',(#544632)); +#544632 = FILL_AREA_STYLE_COLOUR('',#544275); +#544633 = STYLED_ITEM('color',(#544634),#181450); +#544634 = PRESENTATION_STYLE_ASSIGNMENT((#544635)); +#544635 = SURFACE_STYLE_USAGE(.BOTH.,#544636); +#544636 = SURFACE_SIDE_STYLE('',(#544637)); +#544637 = SURFACE_STYLE_FILL_AREA(#544638); +#544638 = FILL_AREA_STYLE('',(#544639)); +#544639 = FILL_AREA_STYLE_COLOUR('',#544275); +#544640 = STYLED_ITEM('color',(#544641),#181572); +#544641 = PRESENTATION_STYLE_ASSIGNMENT((#544642)); +#544642 = SURFACE_STYLE_USAGE(.BOTH.,#544643); +#544643 = SURFACE_SIDE_STYLE('',(#544644)); +#544644 = SURFACE_STYLE_FILL_AREA(#544645); +#544645 = FILL_AREA_STYLE('',(#544646)); +#544646 = FILL_AREA_STYLE_COLOUR('',#544275); +#544647 = STYLED_ITEM('color',(#544648),#181588); +#544648 = PRESENTATION_STYLE_ASSIGNMENT((#544649)); +#544649 = SURFACE_STYLE_USAGE(.BOTH.,#544650); +#544650 = SURFACE_SIDE_STYLE('',(#544651)); +#544651 = SURFACE_STYLE_FILL_AREA(#544652); +#544652 = FILL_AREA_STYLE('',(#544653)); +#544653 = FILL_AREA_STYLE_COLOUR('',#544275); +#544654 = STYLED_ITEM('color',(#544655),#181613); +#544655 = PRESENTATION_STYLE_ASSIGNMENT((#544656)); +#544656 = SURFACE_STYLE_USAGE(.BOTH.,#544657); +#544657 = SURFACE_SIDE_STYLE('',(#544658)); +#544658 = SURFACE_STYLE_FILL_AREA(#544659); +#544659 = FILL_AREA_STYLE('',(#544660)); +#544660 = FILL_AREA_STYLE_COLOUR('',#544275); +#544661 = STYLED_ITEM('color',(#544662),#181637); +#544662 = PRESENTATION_STYLE_ASSIGNMENT((#544663)); +#544663 = SURFACE_STYLE_USAGE(.BOTH.,#544664); +#544664 = SURFACE_SIDE_STYLE('',(#544665)); +#544665 = SURFACE_STYLE_FILL_AREA(#544666); +#544666 = FILL_AREA_STYLE('',(#544667)); +#544667 = FILL_AREA_STYLE_COLOUR('',#544275); +#544668 = STYLED_ITEM('color',(#544669),#181654); +#544669 = PRESENTATION_STYLE_ASSIGNMENT((#544670)); +#544670 = SURFACE_STYLE_USAGE(.BOTH.,#544671); +#544671 = SURFACE_SIDE_STYLE('',(#544672)); +#544672 = SURFACE_STYLE_FILL_AREA(#544673); +#544673 = FILL_AREA_STYLE('',(#544674)); +#544674 = FILL_AREA_STYLE_COLOUR('',#544275); +#544675 = STYLED_ITEM('color',(#544676),#181671); +#544676 = PRESENTATION_STYLE_ASSIGNMENT((#544677)); +#544677 = SURFACE_STYLE_USAGE(.BOTH.,#544678); +#544678 = SURFACE_SIDE_STYLE('',(#544679)); +#544679 = SURFACE_STYLE_FILL_AREA(#544680); +#544680 = FILL_AREA_STYLE('',(#544681)); +#544681 = FILL_AREA_STYLE_COLOUR('',#544275); +#544682 = STYLED_ITEM('color',(#544683),#181688); +#544683 = PRESENTATION_STYLE_ASSIGNMENT((#544684)); +#544684 = SURFACE_STYLE_USAGE(.BOTH.,#544685); +#544685 = SURFACE_SIDE_STYLE('',(#544686)); +#544686 = SURFACE_STYLE_FILL_AREA(#544687); +#544687 = FILL_AREA_STYLE('',(#544688)); +#544688 = FILL_AREA_STYLE_COLOUR('',#544275); +#544689 = STYLED_ITEM('color',(#544690),#181719); +#544690 = PRESENTATION_STYLE_ASSIGNMENT((#544691)); +#544691 = SURFACE_STYLE_USAGE(.BOTH.,#544692); +#544692 = SURFACE_SIDE_STYLE('',(#544693)); +#544693 = SURFACE_STYLE_FILL_AREA(#544694); +#544694 = FILL_AREA_STYLE('',(#544695)); +#544695 = FILL_AREA_STYLE_COLOUR('',#544275); +#544696 = STYLED_ITEM('color',(#544697),#181742); +#544697 = PRESENTATION_STYLE_ASSIGNMENT((#544698)); +#544698 = SURFACE_STYLE_USAGE(.BOTH.,#544699); +#544699 = SURFACE_SIDE_STYLE('',(#544700)); +#544700 = SURFACE_STYLE_FILL_AREA(#544701); +#544701 = FILL_AREA_STYLE('',(#544702)); +#544702 = FILL_AREA_STYLE_COLOUR('',#544275); +#544703 = STYLED_ITEM('color',(#544704),#181765); +#544704 = PRESENTATION_STYLE_ASSIGNMENT((#544705)); +#544705 = SURFACE_STYLE_USAGE(.BOTH.,#544706); +#544706 = SURFACE_SIDE_STYLE('',(#544707)); +#544707 = SURFACE_STYLE_FILL_AREA(#544708); +#544708 = FILL_AREA_STYLE('',(#544709)); +#544709 = FILL_AREA_STYLE_COLOUR('',#544275); +#544710 = STYLED_ITEM('color',(#544711),#181790); +#544711 = PRESENTATION_STYLE_ASSIGNMENT((#544712)); +#544712 = SURFACE_STYLE_USAGE(.BOTH.,#544713); +#544713 = SURFACE_SIDE_STYLE('',(#544714)); +#544714 = SURFACE_STYLE_FILL_AREA(#544715); +#544715 = FILL_AREA_STYLE('',(#544716)); +#544716 = FILL_AREA_STYLE_COLOUR('',#544275); +#544717 = STYLED_ITEM('color',(#544718),#181809); +#544718 = PRESENTATION_STYLE_ASSIGNMENT((#544719)); +#544719 = SURFACE_STYLE_USAGE(.BOTH.,#544720); +#544720 = SURFACE_SIDE_STYLE('',(#544721)); +#544721 = SURFACE_STYLE_FILL_AREA(#544722); +#544722 = FILL_AREA_STYLE('',(#544723)); +#544723 = FILL_AREA_STYLE_COLOUR('',#544275); +#544724 = STYLED_ITEM('color',(#544725),#181821); +#544725 = PRESENTATION_STYLE_ASSIGNMENT((#544726)); +#544726 = SURFACE_STYLE_USAGE(.BOTH.,#544727); +#544727 = SURFACE_SIDE_STYLE('',(#544728)); +#544728 = SURFACE_STYLE_FILL_AREA(#544729); +#544729 = FILL_AREA_STYLE('',(#544730)); +#544730 = FILL_AREA_STYLE_COLOUR('',#544275); +#544731 = STYLED_ITEM('color',(#544732),#181845); +#544732 = PRESENTATION_STYLE_ASSIGNMENT((#544733)); +#544733 = SURFACE_STYLE_USAGE(.BOTH.,#544734); +#544734 = SURFACE_SIDE_STYLE('',(#544735)); +#544735 = SURFACE_STYLE_FILL_AREA(#544736); +#544736 = FILL_AREA_STYLE('',(#544737)); +#544737 = FILL_AREA_STYLE_COLOUR('',#544275); +#544738 = STYLED_ITEM('color',(#544739),#181863); +#544739 = PRESENTATION_STYLE_ASSIGNMENT((#544740)); +#544740 = SURFACE_STYLE_USAGE(.BOTH.,#544741); +#544741 = SURFACE_SIDE_STYLE('',(#544742)); +#544742 = SURFACE_STYLE_FILL_AREA(#544743); +#544743 = FILL_AREA_STYLE('',(#544744)); +#544744 = FILL_AREA_STYLE_COLOUR('',#544275); +#544745 = STYLED_ITEM('color',(#544746),#181887); +#544746 = PRESENTATION_STYLE_ASSIGNMENT((#544747)); +#544747 = SURFACE_STYLE_USAGE(.BOTH.,#544748); +#544748 = SURFACE_SIDE_STYLE('',(#544749)); +#544749 = SURFACE_STYLE_FILL_AREA(#544750); +#544750 = FILL_AREA_STYLE('',(#544751)); +#544751 = FILL_AREA_STYLE_COLOUR('',#544275); +#544752 = STYLED_ITEM('color',(#544753),#181930); +#544753 = PRESENTATION_STYLE_ASSIGNMENT((#544754)); +#544754 = SURFACE_STYLE_USAGE(.BOTH.,#544755); +#544755 = SURFACE_SIDE_STYLE('',(#544756)); +#544756 = SURFACE_STYLE_FILL_AREA(#544757); +#544757 = FILL_AREA_STYLE('',(#544758)); +#544758 = FILL_AREA_STYLE_COLOUR('',#544275); +#544759 = STYLED_ITEM('color',(#544760),#181954); +#544760 = PRESENTATION_STYLE_ASSIGNMENT((#544761)); +#544761 = SURFACE_STYLE_USAGE(.BOTH.,#544762); +#544762 = SURFACE_SIDE_STYLE('',(#544763)); +#544763 = SURFACE_STYLE_FILL_AREA(#544764); +#544764 = FILL_AREA_STYLE('',(#544765)); +#544765 = FILL_AREA_STYLE_COLOUR('',#544275); +#544766 = STYLED_ITEM('color',(#544767),#181997); +#544767 = PRESENTATION_STYLE_ASSIGNMENT((#544768)); +#544768 = SURFACE_STYLE_USAGE(.BOTH.,#544769); +#544769 = SURFACE_SIDE_STYLE('',(#544770)); +#544770 = SURFACE_STYLE_FILL_AREA(#544771); +#544771 = FILL_AREA_STYLE('',(#544772)); +#544772 = FILL_AREA_STYLE_COLOUR('',#544275); +#544773 = STYLED_ITEM('color',(#544774),#182021); +#544774 = PRESENTATION_STYLE_ASSIGNMENT((#544775)); +#544775 = SURFACE_STYLE_USAGE(.BOTH.,#544776); +#544776 = SURFACE_SIDE_STYLE('',(#544777)); +#544777 = SURFACE_STYLE_FILL_AREA(#544778); +#544778 = FILL_AREA_STYLE('',(#544779)); +#544779 = FILL_AREA_STYLE_COLOUR('',#544275); +#544780 = STYLED_ITEM('color',(#544781),#182046); +#544781 = PRESENTATION_STYLE_ASSIGNMENT((#544782)); +#544782 = SURFACE_STYLE_USAGE(.BOTH.,#544783); +#544783 = SURFACE_SIDE_STYLE('',(#544784)); +#544784 = SURFACE_STYLE_FILL_AREA(#544785); +#544785 = FILL_AREA_STYLE('',(#544786)); +#544786 = FILL_AREA_STYLE_COLOUR('',#544275); +#544787 = STYLED_ITEM('color',(#544788),#182070); +#544788 = PRESENTATION_STYLE_ASSIGNMENT((#544789)); +#544789 = SURFACE_STYLE_USAGE(.BOTH.,#544790); +#544790 = SURFACE_SIDE_STYLE('',(#544791)); +#544791 = SURFACE_STYLE_FILL_AREA(#544792); +#544792 = FILL_AREA_STYLE('',(#544793)); +#544793 = FILL_AREA_STYLE_COLOUR('',#544275); +#544794 = STYLED_ITEM('color',(#544795),#182087); +#544795 = PRESENTATION_STYLE_ASSIGNMENT((#544796)); +#544796 = SURFACE_STYLE_USAGE(.BOTH.,#544797); +#544797 = SURFACE_SIDE_STYLE('',(#544798)); +#544798 = SURFACE_STYLE_FILL_AREA(#544799); +#544799 = FILL_AREA_STYLE('',(#544800)); +#544800 = FILL_AREA_STYLE_COLOUR('',#544275); +#544801 = STYLED_ITEM('color',(#544802),#182104); +#544802 = PRESENTATION_STYLE_ASSIGNMENT((#544803)); +#544803 = SURFACE_STYLE_USAGE(.BOTH.,#544804); +#544804 = SURFACE_SIDE_STYLE('',(#544805)); +#544805 = SURFACE_STYLE_FILL_AREA(#544806); +#544806 = FILL_AREA_STYLE('',(#544807)); +#544807 = FILL_AREA_STYLE_COLOUR('',#544275); +#544808 = STYLED_ITEM('color',(#544809),#182115); +#544809 = PRESENTATION_STYLE_ASSIGNMENT((#544810)); +#544810 = SURFACE_STYLE_USAGE(.BOTH.,#544811); +#544811 = SURFACE_SIDE_STYLE('',(#544812)); +#544812 = SURFACE_STYLE_FILL_AREA(#544813); +#544813 = FILL_AREA_STYLE('',(#544814)); +#544814 = FILL_AREA_STYLE_COLOUR('',#544275); +#544815 = STYLED_ITEM('color',(#544816),#182150); +#544816 = PRESENTATION_STYLE_ASSIGNMENT((#544817)); +#544817 = SURFACE_STYLE_USAGE(.BOTH.,#544818); +#544818 = SURFACE_SIDE_STYLE('',(#544819)); +#544819 = SURFACE_STYLE_FILL_AREA(#544820); +#544820 = FILL_AREA_STYLE('',(#544821)); +#544821 = FILL_AREA_STYLE_COLOUR('',#544275); +#544822 = STYLED_ITEM('color',(#544823),#182166); +#544823 = PRESENTATION_STYLE_ASSIGNMENT((#544824)); +#544824 = SURFACE_STYLE_USAGE(.BOTH.,#544825); +#544825 = SURFACE_SIDE_STYLE('',(#544826)); +#544826 = SURFACE_STYLE_FILL_AREA(#544827); +#544827 = FILL_AREA_STYLE('',(#544828)); +#544828 = FILL_AREA_STYLE_COLOUR('',#544275); +#544829 = STYLED_ITEM('color',(#544830),#182194); +#544830 = PRESENTATION_STYLE_ASSIGNMENT((#544831)); +#544831 = SURFACE_STYLE_USAGE(.BOTH.,#544832); +#544832 = SURFACE_SIDE_STYLE('',(#544833)); +#544833 = SURFACE_STYLE_FILL_AREA(#544834); +#544834 = FILL_AREA_STYLE('',(#544835)); +#544835 = FILL_AREA_STYLE_COLOUR('',#544275); +#544836 = STYLED_ITEM('color',(#544837),#182210); +#544837 = PRESENTATION_STYLE_ASSIGNMENT((#544838)); +#544838 = SURFACE_STYLE_USAGE(.BOTH.,#544839); +#544839 = SURFACE_SIDE_STYLE('',(#544840)); +#544840 = SURFACE_STYLE_FILL_AREA(#544841); +#544841 = FILL_AREA_STYLE('',(#544842)); +#544842 = FILL_AREA_STYLE_COLOUR('',#544275); +#544843 = STYLED_ITEM('color',(#544844),#182232); +#544844 = PRESENTATION_STYLE_ASSIGNMENT((#544845)); +#544845 = SURFACE_STYLE_USAGE(.BOTH.,#544846); +#544846 = SURFACE_SIDE_STYLE('',(#544847)); +#544847 = SURFACE_STYLE_FILL_AREA(#544848); +#544848 = FILL_AREA_STYLE('',(#544849)); +#544849 = FILL_AREA_STYLE_COLOUR('',#544275); +#544850 = STYLED_ITEM('color',(#544851),#182260); +#544851 = PRESENTATION_STYLE_ASSIGNMENT((#544852)); +#544852 = SURFACE_STYLE_USAGE(.BOTH.,#544853); +#544853 = SURFACE_SIDE_STYLE('',(#544854)); +#544854 = SURFACE_STYLE_FILL_AREA(#544855); +#544855 = FILL_AREA_STYLE('',(#544856)); +#544856 = FILL_AREA_STYLE_COLOUR('',#544275); +#544857 = STYLED_ITEM('color',(#544858),#182282); +#544858 = PRESENTATION_STYLE_ASSIGNMENT((#544859)); +#544859 = SURFACE_STYLE_USAGE(.BOTH.,#544860); +#544860 = SURFACE_SIDE_STYLE('',(#544861)); +#544861 = SURFACE_STYLE_FILL_AREA(#544862); +#544862 = FILL_AREA_STYLE('',(#544863)); +#544863 = FILL_AREA_STYLE_COLOUR('',#544275); +#544864 = STYLED_ITEM('color',(#544865),#182298); +#544865 = PRESENTATION_STYLE_ASSIGNMENT((#544866)); +#544866 = SURFACE_STYLE_USAGE(.BOTH.,#544867); +#544867 = SURFACE_SIDE_STYLE('',(#544868)); +#544868 = SURFACE_STYLE_FILL_AREA(#544869); +#544869 = FILL_AREA_STYLE('',(#544870)); +#544870 = FILL_AREA_STYLE_COLOUR('',#544275); +#544871 = STYLED_ITEM('color',(#544872),#182320); +#544872 = PRESENTATION_STYLE_ASSIGNMENT((#544873)); +#544873 = SURFACE_STYLE_USAGE(.BOTH.,#544874); +#544874 = SURFACE_SIDE_STYLE('',(#544875)); +#544875 = SURFACE_STYLE_FILL_AREA(#544876); +#544876 = FILL_AREA_STYLE('',(#544877)); +#544877 = FILL_AREA_STYLE_COLOUR('',#544275); +#544878 = STYLED_ITEM('color',(#544879),#182348); +#544879 = PRESENTATION_STYLE_ASSIGNMENT((#544880)); +#544880 = SURFACE_STYLE_USAGE(.BOTH.,#544881); +#544881 = SURFACE_SIDE_STYLE('',(#544882)); +#544882 = SURFACE_STYLE_FILL_AREA(#544883); +#544883 = FILL_AREA_STYLE('',(#544884)); +#544884 = FILL_AREA_STYLE_COLOUR('',#544275); +#544885 = STYLED_ITEM('color',(#544886),#182370); +#544886 = PRESENTATION_STYLE_ASSIGNMENT((#544887)); +#544887 = SURFACE_STYLE_USAGE(.BOTH.,#544888); +#544888 = SURFACE_SIDE_STYLE('',(#544889)); +#544889 = SURFACE_STYLE_FILL_AREA(#544890); +#544890 = FILL_AREA_STYLE('',(#544891)); +#544891 = FILL_AREA_STYLE_COLOUR('',#544275); +#544892 = STYLED_ITEM('color',(#544893),#182386); +#544893 = PRESENTATION_STYLE_ASSIGNMENT((#544894)); +#544894 = SURFACE_STYLE_USAGE(.BOTH.,#544895); +#544895 = SURFACE_SIDE_STYLE('',(#544896)); +#544896 = SURFACE_STYLE_FILL_AREA(#544897); +#544897 = FILL_AREA_STYLE('',(#544898)); +#544898 = FILL_AREA_STYLE_COLOUR('',#544275); +#544899 = STYLED_ITEM('color',(#544900),#182410); +#544900 = PRESENTATION_STYLE_ASSIGNMENT((#544901)); +#544901 = SURFACE_STYLE_USAGE(.BOTH.,#544902); +#544902 = SURFACE_SIDE_STYLE('',(#544903)); +#544903 = SURFACE_STYLE_FILL_AREA(#544904); +#544904 = FILL_AREA_STYLE('',(#544905)); +#544905 = FILL_AREA_STYLE_COLOUR('',#544275); +#544906 = STYLED_ITEM('color',(#544907),#182422); +#544907 = PRESENTATION_STYLE_ASSIGNMENT((#544908)); +#544908 = SURFACE_STYLE_USAGE(.BOTH.,#544909); +#544909 = SURFACE_SIDE_STYLE('',(#544910)); +#544910 = SURFACE_STYLE_FILL_AREA(#544911); +#544911 = FILL_AREA_STYLE('',(#544912)); +#544912 = FILL_AREA_STYLE_COLOUR('',#544275); +#544913 = STYLED_ITEM('color',(#544914),#182436); +#544914 = PRESENTATION_STYLE_ASSIGNMENT((#544915)); +#544915 = SURFACE_STYLE_USAGE(.BOTH.,#544916); +#544916 = SURFACE_SIDE_STYLE('',(#544917)); +#544917 = SURFACE_STYLE_FILL_AREA(#544918); +#544918 = FILL_AREA_STYLE('',(#544919)); +#544919 = FILL_AREA_STYLE_COLOUR('',#544920); +#544920 = COLOUR_RGB('',0.703800032393,0.270480008394,8.279999921876E-02 + ); +#544921 = STYLED_ITEM('color',(#544922),#182453); +#544922 = PRESENTATION_STYLE_ASSIGNMENT((#544923)); +#544923 = SURFACE_STYLE_USAGE(.BOTH.,#544924); +#544924 = SURFACE_SIDE_STYLE('',(#544925)); +#544925 = SURFACE_STYLE_FILL_AREA(#544926); +#544926 = FILL_AREA_STYLE('',(#544927)); +#544927 = FILL_AREA_STYLE_COLOUR('',#544920); +#544928 = STYLED_ITEM('color',(#544929),#182687); +#544929 = PRESENTATION_STYLE_ASSIGNMENT((#544930)); +#544930 = SURFACE_STYLE_USAGE(.BOTH.,#544931); +#544931 = SURFACE_SIDE_STYLE('',(#544932)); +#544932 = SURFACE_STYLE_FILL_AREA(#544933); +#544933 = FILL_AREA_STYLE('',(#544934)); +#544934 = FILL_AREA_STYLE_COLOUR('',#544920); +#544935 = STYLED_ITEM('color',(#544936),#182698); +#544936 = PRESENTATION_STYLE_ASSIGNMENT((#544937)); +#544937 = SURFACE_STYLE_USAGE(.BOTH.,#544938); +#544938 = SURFACE_SIDE_STYLE('',(#544939)); +#544939 = SURFACE_STYLE_FILL_AREA(#544940); +#544940 = FILL_AREA_STYLE('',(#544941)); +#544941 = FILL_AREA_STYLE_COLOUR('',#544920); +#544942 = STYLED_ITEM('color',(#544943),#182715); +#544943 = PRESENTATION_STYLE_ASSIGNMENT((#544944)); +#544944 = SURFACE_STYLE_USAGE(.BOTH.,#544945); +#544945 = SURFACE_SIDE_STYLE('',(#544946)); +#544946 = SURFACE_STYLE_FILL_AREA(#544947); +#544947 = FILL_AREA_STYLE('',(#544948)); +#544948 = FILL_AREA_STYLE_COLOUR('',#544920); +#544949 = STYLED_ITEM('color',(#544950),#182949); +#544950 = PRESENTATION_STYLE_ASSIGNMENT((#544951)); +#544951 = SURFACE_STYLE_USAGE(.BOTH.,#544952); +#544952 = SURFACE_SIDE_STYLE('',(#544953)); +#544953 = SURFACE_STYLE_FILL_AREA(#544954); +#544954 = FILL_AREA_STYLE('',(#544955)); +#544955 = FILL_AREA_STYLE_COLOUR('',#544920); +#544956 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #544957,#544966,#544975,#544984,#544993,#545002,#545011,#545020, + #545029,#545038,#545047,#545056,#545065,#545074,#545083,#545092, + #545101,#545110,#545119,#545128,#545137,#545146,#545155,#545164, + #545173,#545182,#545191,#545200,#545209,#545218,#545227,#545236, + #545245,#545254,#545263,#545272,#545281,#545290,#545299,#545308, + #545317,#545326,#545335,#545344,#545353,#545362,#545371,#545380, + #545389,#545398,#545407,#545416,#545425,#545434,#545443,#545452, + #545461,#545470,#545479,#545488,#545497,#545506,#545515,#545524, + #545533,#545542,#545551,#545560,#545569,#545578,#545587,#545596), + #165977); +#544957 = STYLED_ITEM('color',(#544958),#163846); +#544958 = PRESENTATION_STYLE_ASSIGNMENT((#544959,#544964)); +#544959 = SURFACE_STYLE_USAGE(.BOTH.,#544960); +#544960 = SURFACE_SIDE_STYLE('',(#544961)); +#544961 = SURFACE_STYLE_FILL_AREA(#544962); +#544962 = FILL_AREA_STYLE('',(#544963)); +#544963 = FILL_AREA_STYLE_COLOUR('',#512501); +#544964 = CURVE_STYLE('',#544965,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#544965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#544966 = STYLED_ITEM('color',(#544967),#163884); +#544967 = PRESENTATION_STYLE_ASSIGNMENT((#544968,#544973)); +#544968 = SURFACE_STYLE_USAGE(.BOTH.,#544969); +#544969 = SURFACE_SIDE_STYLE('',(#544970)); +#544970 = SURFACE_STYLE_FILL_AREA(#544971); +#544971 = FILL_AREA_STYLE('',(#544972)); +#544972 = FILL_AREA_STYLE_COLOUR('',#512501); +#544973 = CURVE_STYLE('',#544974,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#544974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#544975 = STYLED_ITEM('color',(#544976),#163947); +#544976 = PRESENTATION_STYLE_ASSIGNMENT((#544977,#544982)); +#544977 = SURFACE_STYLE_USAGE(.BOTH.,#544978); +#544978 = SURFACE_SIDE_STYLE('',(#544979)); +#544979 = SURFACE_STYLE_FILL_AREA(#544980); +#544980 = FILL_AREA_STYLE('',(#544981)); +#544981 = FILL_AREA_STYLE_COLOUR('',#512501); +#544982 = CURVE_STYLE('',#544983,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#544983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#544984 = STYLED_ITEM('color',(#544985),#163970); +#544985 = PRESENTATION_STYLE_ASSIGNMENT((#544986,#544991)); +#544986 = SURFACE_STYLE_USAGE(.BOTH.,#544987); +#544987 = SURFACE_SIDE_STYLE('',(#544988)); +#544988 = SURFACE_STYLE_FILL_AREA(#544989); +#544989 = FILL_AREA_STYLE('',(#544990)); +#544990 = FILL_AREA_STYLE_COLOUR('',#512501); +#544991 = CURVE_STYLE('',#544992,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#544992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#544993 = STYLED_ITEM('color',(#544994),#163999); +#544994 = PRESENTATION_STYLE_ASSIGNMENT((#544995,#545000)); +#544995 = SURFACE_STYLE_USAGE(.BOTH.,#544996); +#544996 = SURFACE_SIDE_STYLE('',(#544997)); +#544997 = SURFACE_STYLE_FILL_AREA(#544998); +#544998 = FILL_AREA_STYLE('',(#544999)); +#544999 = FILL_AREA_STYLE_COLOUR('',#512501); +#545000 = CURVE_STYLE('',#545001,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545002 = STYLED_ITEM('color',(#545003),#164054); +#545003 = PRESENTATION_STYLE_ASSIGNMENT((#545004,#545009)); +#545004 = SURFACE_STYLE_USAGE(.BOTH.,#545005); +#545005 = SURFACE_SIDE_STYLE('',(#545006)); +#545006 = SURFACE_STYLE_FILL_AREA(#545007); +#545007 = FILL_AREA_STYLE('',(#545008)); +#545008 = FILL_AREA_STYLE_COLOUR('',#512501); +#545009 = CURVE_STYLE('',#545010,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545011 = STYLED_ITEM('color',(#545012),#164077); +#545012 = PRESENTATION_STYLE_ASSIGNMENT((#545013,#545018)); +#545013 = SURFACE_STYLE_USAGE(.BOTH.,#545014); +#545014 = SURFACE_SIDE_STYLE('',(#545015)); +#545015 = SURFACE_STYLE_FILL_AREA(#545016); +#545016 = FILL_AREA_STYLE('',(#545017)); +#545017 = FILL_AREA_STYLE_COLOUR('',#512501); +#545018 = CURVE_STYLE('',#545019,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545020 = STYLED_ITEM('color',(#545021),#164100); +#545021 = PRESENTATION_STYLE_ASSIGNMENT((#545022,#545027)); +#545022 = SURFACE_STYLE_USAGE(.BOTH.,#545023); +#545023 = SURFACE_SIDE_STYLE('',(#545024)); +#545024 = SURFACE_STYLE_FILL_AREA(#545025); +#545025 = FILL_AREA_STYLE('',(#545026)); +#545026 = FILL_AREA_STYLE_COLOUR('',#512501); +#545027 = CURVE_STYLE('',#545028,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545029 = STYLED_ITEM('color',(#545030),#164123); +#545030 = PRESENTATION_STYLE_ASSIGNMENT((#545031,#545036)); +#545031 = SURFACE_STYLE_USAGE(.BOTH.,#545032); +#545032 = SURFACE_SIDE_STYLE('',(#545033)); +#545033 = SURFACE_STYLE_FILL_AREA(#545034); +#545034 = FILL_AREA_STYLE('',(#545035)); +#545035 = FILL_AREA_STYLE_COLOUR('',#512501); +#545036 = CURVE_STYLE('',#545037,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545038 = STYLED_ITEM('color',(#545039),#164162); +#545039 = PRESENTATION_STYLE_ASSIGNMENT((#545040,#545045)); +#545040 = SURFACE_STYLE_USAGE(.BOTH.,#545041); +#545041 = SURFACE_SIDE_STYLE('',(#545042)); +#545042 = SURFACE_STYLE_FILL_AREA(#545043); +#545043 = FILL_AREA_STYLE('',(#545044)); +#545044 = FILL_AREA_STYLE_COLOUR('',#512501); +#545045 = CURVE_STYLE('',#545046,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545047 = STYLED_ITEM('color',(#545048),#164179); +#545048 = PRESENTATION_STYLE_ASSIGNMENT((#545049,#545054)); +#545049 = SURFACE_STYLE_USAGE(.BOTH.,#545050); +#545050 = SURFACE_SIDE_STYLE('',(#545051)); +#545051 = SURFACE_STYLE_FILL_AREA(#545052); +#545052 = FILL_AREA_STYLE('',(#545053)); +#545053 = FILL_AREA_STYLE_COLOUR('',#512501); +#545054 = CURVE_STYLE('',#545055,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545056 = STYLED_ITEM('color',(#545057),#164202); +#545057 = PRESENTATION_STYLE_ASSIGNMENT((#545058,#545063)); +#545058 = SURFACE_STYLE_USAGE(.BOTH.,#545059); +#545059 = SURFACE_SIDE_STYLE('',(#545060)); +#545060 = SURFACE_STYLE_FILL_AREA(#545061); +#545061 = FILL_AREA_STYLE('',(#545062)); +#545062 = FILL_AREA_STYLE_COLOUR('',#512501); +#545063 = CURVE_STYLE('',#545064,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545065 = STYLED_ITEM('color',(#545066),#164290); +#545066 = PRESENTATION_STYLE_ASSIGNMENT((#545067,#545072)); +#545067 = SURFACE_STYLE_USAGE(.BOTH.,#545068); +#545068 = SURFACE_SIDE_STYLE('',(#545069)); +#545069 = SURFACE_STYLE_FILL_AREA(#545070); +#545070 = FILL_AREA_STYLE('',(#545071)); +#545071 = FILL_AREA_STYLE_COLOUR('',#512501); +#545072 = CURVE_STYLE('',#545073,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545074 = STYLED_ITEM('color',(#545075),#164307); +#545075 = PRESENTATION_STYLE_ASSIGNMENT((#545076,#545081)); +#545076 = SURFACE_STYLE_USAGE(.BOTH.,#545077); +#545077 = SURFACE_SIDE_STYLE('',(#545078)); +#545078 = SURFACE_STYLE_FILL_AREA(#545079); +#545079 = FILL_AREA_STYLE('',(#545080)); +#545080 = FILL_AREA_STYLE_COLOUR('',#512501); +#545081 = CURVE_STYLE('',#545082,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545083 = STYLED_ITEM('color',(#545084),#164337); +#545084 = PRESENTATION_STYLE_ASSIGNMENT((#545085,#545090)); +#545085 = SURFACE_STYLE_USAGE(.BOTH.,#545086); +#545086 = SURFACE_SIDE_STYLE('',(#545087)); +#545087 = SURFACE_STYLE_FILL_AREA(#545088); +#545088 = FILL_AREA_STYLE('',(#545089)); +#545089 = FILL_AREA_STYLE_COLOUR('',#512538); +#545090 = CURVE_STYLE('',#545091,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545092 = STYLED_ITEM('color',(#545093),#164368); +#545093 = PRESENTATION_STYLE_ASSIGNMENT((#545094,#545099)); +#545094 = SURFACE_STYLE_USAGE(.BOTH.,#545095); +#545095 = SURFACE_SIDE_STYLE('',(#545096)); +#545096 = SURFACE_STYLE_FILL_AREA(#545097); +#545097 = FILL_AREA_STYLE('',(#545098)); +#545098 = FILL_AREA_STYLE_COLOUR('',#512501); +#545099 = CURVE_STYLE('',#545100,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545101 = STYLED_ITEM('color',(#545102),#164399); +#545102 = PRESENTATION_STYLE_ASSIGNMENT((#545103,#545108)); +#545103 = SURFACE_STYLE_USAGE(.BOTH.,#545104); +#545104 = SURFACE_SIDE_STYLE('',(#545105)); +#545105 = SURFACE_STYLE_FILL_AREA(#545106); +#545106 = FILL_AREA_STYLE('',(#545107)); +#545107 = FILL_AREA_STYLE_COLOUR('',#512538); +#545108 = CURVE_STYLE('',#545109,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545110 = STYLED_ITEM('color',(#545111),#164430); +#545111 = PRESENTATION_STYLE_ASSIGNMENT((#545112,#545117)); +#545112 = SURFACE_STYLE_USAGE(.BOTH.,#545113); +#545113 = SURFACE_SIDE_STYLE('',(#545114)); +#545114 = SURFACE_STYLE_FILL_AREA(#545115); +#545115 = FILL_AREA_STYLE('',(#545116)); +#545116 = FILL_AREA_STYLE_COLOUR('',#512501); +#545117 = CURVE_STYLE('',#545118,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545119 = STYLED_ITEM('color',(#545120),#164453); +#545120 = PRESENTATION_STYLE_ASSIGNMENT((#545121,#545126)); +#545121 = SURFACE_STYLE_USAGE(.BOTH.,#545122); +#545122 = SURFACE_SIDE_STYLE('',(#545123)); +#545123 = SURFACE_STYLE_FILL_AREA(#545124); +#545124 = FILL_AREA_STYLE('',(#545125)); +#545125 = FILL_AREA_STYLE_COLOUR('',#512501); +#545126 = CURVE_STYLE('',#545127,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545128 = STYLED_ITEM('color',(#545129),#164469); +#545129 = PRESENTATION_STYLE_ASSIGNMENT((#545130,#545135)); +#545130 = SURFACE_STYLE_USAGE(.BOTH.,#545131); +#545131 = SURFACE_SIDE_STYLE('',(#545132)); +#545132 = SURFACE_STYLE_FILL_AREA(#545133); +#545133 = FILL_AREA_STYLE('',(#545134)); +#545134 = FILL_AREA_STYLE_COLOUR('',#512501); +#545135 = CURVE_STYLE('',#545136,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545137 = STYLED_ITEM('color',(#545138),#164492); +#545138 = PRESENTATION_STYLE_ASSIGNMENT((#545139,#545144)); +#545139 = SURFACE_STYLE_USAGE(.BOTH.,#545140); +#545140 = SURFACE_SIDE_STYLE('',(#545141)); +#545141 = SURFACE_STYLE_FILL_AREA(#545142); +#545142 = FILL_AREA_STYLE('',(#545143)); +#545143 = FILL_AREA_STYLE_COLOUR('',#512501); +#545144 = CURVE_STYLE('',#545145,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545146 = STYLED_ITEM('color',(#545147),#164509); +#545147 = PRESENTATION_STYLE_ASSIGNMENT((#545148,#545153)); +#545148 = SURFACE_STYLE_USAGE(.BOTH.,#545149); +#545149 = SURFACE_SIDE_STYLE('',(#545150)); +#545150 = SURFACE_STYLE_FILL_AREA(#545151); +#545151 = FILL_AREA_STYLE('',(#545152)); +#545152 = FILL_AREA_STYLE_COLOUR('',#512538); +#545153 = CURVE_STYLE('',#545154,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545155 = STYLED_ITEM('color',(#545156),#164540); +#545156 = PRESENTATION_STYLE_ASSIGNMENT((#545157,#545162)); +#545157 = SURFACE_STYLE_USAGE(.BOTH.,#545158); +#545158 = SURFACE_SIDE_STYLE('',(#545159)); +#545159 = SURFACE_STYLE_FILL_AREA(#545160); +#545160 = FILL_AREA_STYLE('',(#545161)); +#545161 = FILL_AREA_STYLE_COLOUR('',#512501); +#545162 = CURVE_STYLE('',#545163,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545164 = STYLED_ITEM('color',(#545165),#164570); +#545165 = PRESENTATION_STYLE_ASSIGNMENT((#545166,#545171)); +#545166 = SURFACE_STYLE_USAGE(.BOTH.,#545167); +#545167 = SURFACE_SIDE_STYLE('',(#545168)); +#545168 = SURFACE_STYLE_FILL_AREA(#545169); +#545169 = FILL_AREA_STYLE('',(#545170)); +#545170 = FILL_AREA_STYLE_COLOUR('',#512501); +#545171 = CURVE_STYLE('',#545172,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545173 = STYLED_ITEM('color',(#545174),#164587); +#545174 = PRESENTATION_STYLE_ASSIGNMENT((#545175,#545180)); +#545175 = SURFACE_STYLE_USAGE(.BOTH.,#545176); +#545176 = SURFACE_SIDE_STYLE('',(#545177)); +#545177 = SURFACE_STYLE_FILL_AREA(#545178); +#545178 = FILL_AREA_STYLE('',(#545179)); +#545179 = FILL_AREA_STYLE_COLOUR('',#512538); +#545180 = CURVE_STYLE('',#545181,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545182 = STYLED_ITEM('color',(#545183),#164632); +#545183 = PRESENTATION_STYLE_ASSIGNMENT((#545184,#545189)); +#545184 = SURFACE_STYLE_USAGE(.BOTH.,#545185); +#545185 = SURFACE_SIDE_STYLE('',(#545186)); +#545186 = SURFACE_STYLE_FILL_AREA(#545187); +#545187 = FILL_AREA_STYLE('',(#545188)); +#545188 = FILL_AREA_STYLE_COLOUR('',#512501); +#545189 = CURVE_STYLE('',#545190,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545191 = STYLED_ITEM('color',(#545192),#164686); +#545192 = PRESENTATION_STYLE_ASSIGNMENT((#545193,#545198)); +#545193 = SURFACE_STYLE_USAGE(.BOTH.,#545194); +#545194 = SURFACE_SIDE_STYLE('',(#545195)); +#545195 = SURFACE_STYLE_FILL_AREA(#545196); +#545196 = FILL_AREA_STYLE('',(#545197)); +#545197 = FILL_AREA_STYLE_COLOUR('',#512501); +#545198 = CURVE_STYLE('',#545199,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545200 = STYLED_ITEM('color',(#545201),#164709); +#545201 = PRESENTATION_STYLE_ASSIGNMENT((#545202,#545207)); +#545202 = SURFACE_STYLE_USAGE(.BOTH.,#545203); +#545203 = SURFACE_SIDE_STYLE('',(#545204)); +#545204 = SURFACE_STYLE_FILL_AREA(#545205); +#545205 = FILL_AREA_STYLE('',(#545206)); +#545206 = FILL_AREA_STYLE_COLOUR('',#512501); +#545207 = CURVE_STYLE('',#545208,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545209 = STYLED_ITEM('color',(#545210),#164732); +#545210 = PRESENTATION_STYLE_ASSIGNMENT((#545211,#545216)); +#545211 = SURFACE_STYLE_USAGE(.BOTH.,#545212); +#545212 = SURFACE_SIDE_STYLE('',(#545213)); +#545213 = SURFACE_STYLE_FILL_AREA(#545214); +#545214 = FILL_AREA_STYLE('',(#545215)); +#545215 = FILL_AREA_STYLE_COLOUR('',#512501); +#545216 = CURVE_STYLE('',#545217,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545218 = STYLED_ITEM('color',(#545219),#164755); +#545219 = PRESENTATION_STYLE_ASSIGNMENT((#545220,#545225)); +#545220 = SURFACE_STYLE_USAGE(.BOTH.,#545221); +#545221 = SURFACE_SIDE_STYLE('',(#545222)); +#545222 = SURFACE_STYLE_FILL_AREA(#545223); +#545223 = FILL_AREA_STYLE('',(#545224)); +#545224 = FILL_AREA_STYLE_COLOUR('',#512501); +#545225 = CURVE_STYLE('',#545226,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545227 = STYLED_ITEM('color',(#545228),#164794); +#545228 = PRESENTATION_STYLE_ASSIGNMENT((#545229,#545234)); +#545229 = SURFACE_STYLE_USAGE(.BOTH.,#545230); +#545230 = SURFACE_SIDE_STYLE('',(#545231)); +#545231 = SURFACE_STYLE_FILL_AREA(#545232); +#545232 = FILL_AREA_STYLE('',(#545233)); +#545233 = FILL_AREA_STYLE_COLOUR('',#512538); +#545234 = CURVE_STYLE('',#545235,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545235 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545236 = STYLED_ITEM('color',(#545237),#164832); +#545237 = PRESENTATION_STYLE_ASSIGNMENT((#545238,#545243)); +#545238 = SURFACE_STYLE_USAGE(.BOTH.,#545239); +#545239 = SURFACE_SIDE_STYLE('',(#545240)); +#545240 = SURFACE_STYLE_FILL_AREA(#545241); +#545241 = FILL_AREA_STYLE('',(#545242)); +#545242 = FILL_AREA_STYLE_COLOUR('',#512538); +#545243 = CURVE_STYLE('',#545244,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545244 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545245 = STYLED_ITEM('color',(#545246),#164917); +#545246 = PRESENTATION_STYLE_ASSIGNMENT((#545247,#545252)); +#545247 = SURFACE_STYLE_USAGE(.BOTH.,#545248); +#545248 = SURFACE_SIDE_STYLE('',(#545249)); +#545249 = SURFACE_STYLE_FILL_AREA(#545250); +#545250 = FILL_AREA_STYLE('',(#545251)); +#545251 = FILL_AREA_STYLE_COLOUR('',#512501); +#545252 = CURVE_STYLE('',#545253,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545253 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545254 = STYLED_ITEM('color',(#545255),#164961); +#545255 = PRESENTATION_STYLE_ASSIGNMENT((#545256,#545261)); +#545256 = SURFACE_STYLE_USAGE(.BOTH.,#545257); +#545257 = SURFACE_SIDE_STYLE('',(#545258)); +#545258 = SURFACE_STYLE_FILL_AREA(#545259); +#545259 = FILL_AREA_STYLE('',(#545260)); +#545260 = FILL_AREA_STYLE_COLOUR('',#512538); +#545261 = CURVE_STYLE('',#545262,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545262 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545263 = STYLED_ITEM('color',(#545264),#165053); +#545264 = PRESENTATION_STYLE_ASSIGNMENT((#545265,#545270)); +#545265 = SURFACE_STYLE_USAGE(.BOTH.,#545266); +#545266 = SURFACE_SIDE_STYLE('',(#545267)); +#545267 = SURFACE_STYLE_FILL_AREA(#545268); +#545268 = FILL_AREA_STYLE('',(#545269)); +#545269 = FILL_AREA_STYLE_COLOUR('',#512538); +#545270 = CURVE_STYLE('',#545271,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545271 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545272 = STYLED_ITEM('color',(#545273),#165078); +#545273 = PRESENTATION_STYLE_ASSIGNMENT((#545274,#545279)); +#545274 = SURFACE_STYLE_USAGE(.BOTH.,#545275); +#545275 = SURFACE_SIDE_STYLE('',(#545276)); +#545276 = SURFACE_STYLE_FILL_AREA(#545277); +#545277 = FILL_AREA_STYLE('',(#545278)); +#545278 = FILL_AREA_STYLE_COLOUR('',#512538); +#545279 = CURVE_STYLE('',#545280,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545280 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545281 = STYLED_ITEM('color',(#545282),#165162); +#545282 = PRESENTATION_STYLE_ASSIGNMENT((#545283,#545288)); +#545283 = SURFACE_STYLE_USAGE(.BOTH.,#545284); +#545284 = SURFACE_SIDE_STYLE('',(#545285)); +#545285 = SURFACE_STYLE_FILL_AREA(#545286); +#545286 = FILL_AREA_STYLE('',(#545287)); +#545287 = FILL_AREA_STYLE_COLOUR('',#512501); +#545288 = CURVE_STYLE('',#545289,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545289 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545290 = STYLED_ITEM('color',(#545291),#165179); +#545291 = PRESENTATION_STYLE_ASSIGNMENT((#545292,#545297)); +#545292 = SURFACE_STYLE_USAGE(.BOTH.,#545293); +#545293 = SURFACE_SIDE_STYLE('',(#545294)); +#545294 = SURFACE_STYLE_FILL_AREA(#545295); +#545295 = FILL_AREA_STYLE('',(#545296)); +#545296 = FILL_AREA_STYLE_COLOUR('',#512538); +#545297 = CURVE_STYLE('',#545298,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545298 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545299 = STYLED_ITEM('color',(#545300),#165264); +#545300 = PRESENTATION_STYLE_ASSIGNMENT((#545301,#545306)); +#545301 = SURFACE_STYLE_USAGE(.BOTH.,#545302); +#545302 = SURFACE_SIDE_STYLE('',(#545303)); +#545303 = SURFACE_STYLE_FILL_AREA(#545304); +#545304 = FILL_AREA_STYLE('',(#545305)); +#545305 = FILL_AREA_STYLE_COLOUR('',#512538); +#545306 = CURVE_STYLE('',#545307,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545307 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545308 = STYLED_ITEM('color',(#545309),#165281); +#545309 = PRESENTATION_STYLE_ASSIGNMENT((#545310,#545315)); +#545310 = SURFACE_STYLE_USAGE(.BOTH.,#545311); +#545311 = SURFACE_SIDE_STYLE('',(#545312)); +#545312 = SURFACE_STYLE_FILL_AREA(#545313); +#545313 = FILL_AREA_STYLE('',(#545314)); +#545314 = FILL_AREA_STYLE_COLOUR('',#512538); +#545315 = CURVE_STYLE('',#545316,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545316 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545317 = STYLED_ITEM('color',(#545318),#165366); +#545318 = PRESENTATION_STYLE_ASSIGNMENT((#545319,#545324)); +#545319 = SURFACE_STYLE_USAGE(.BOTH.,#545320); +#545320 = SURFACE_SIDE_STYLE('',(#545321)); +#545321 = SURFACE_STYLE_FILL_AREA(#545322); +#545322 = FILL_AREA_STYLE('',(#545323)); +#545323 = FILL_AREA_STYLE_COLOUR('',#512538); +#545324 = CURVE_STYLE('',#545325,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545325 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545326 = STYLED_ITEM('color',(#545327),#165391); +#545327 = PRESENTATION_STYLE_ASSIGNMENT((#545328,#545333)); +#545328 = SURFACE_STYLE_USAGE(.BOTH.,#545329); +#545329 = SURFACE_SIDE_STYLE('',(#545330)); +#545330 = SURFACE_STYLE_FILL_AREA(#545331); +#545331 = FILL_AREA_STYLE('',(#545332)); +#545332 = FILL_AREA_STYLE_COLOUR('',#512538); +#545333 = CURVE_STYLE('',#545334,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545334 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545335 = STYLED_ITEM('color',(#545336),#165468); +#545336 = PRESENTATION_STYLE_ASSIGNMENT((#545337,#545342)); +#545337 = SURFACE_STYLE_USAGE(.BOTH.,#545338); +#545338 = SURFACE_SIDE_STYLE('',(#545339)); +#545339 = SURFACE_STYLE_FILL_AREA(#545340); +#545340 = FILL_AREA_STYLE('',(#545341)); +#545341 = FILL_AREA_STYLE_COLOUR('',#512538); +#545342 = CURVE_STYLE('',#545343,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545343 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545344 = STYLED_ITEM('color',(#545345),#165485); +#545345 = PRESENTATION_STYLE_ASSIGNMENT((#545346,#545351)); +#545346 = SURFACE_STYLE_USAGE(.BOTH.,#545347); +#545347 = SURFACE_SIDE_STYLE('',(#545348)); +#545348 = SURFACE_STYLE_FILL_AREA(#545349); +#545349 = FILL_AREA_STYLE('',(#545350)); +#545350 = FILL_AREA_STYLE_COLOUR('',#512538); +#545351 = CURVE_STYLE('',#545352,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545352 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545353 = STYLED_ITEM('color',(#545354),#165504); +#545354 = PRESENTATION_STYLE_ASSIGNMENT((#545355,#545360)); +#545355 = SURFACE_STYLE_USAGE(.BOTH.,#545356); +#545356 = SURFACE_SIDE_STYLE('',(#545357)); +#545357 = SURFACE_STYLE_FILL_AREA(#545358); +#545358 = FILL_AREA_STYLE('',(#545359)); +#545359 = FILL_AREA_STYLE_COLOUR('',#512501); +#545360 = CURVE_STYLE('',#545361,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545361 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545362 = STYLED_ITEM('color',(#545363),#165550); +#545363 = PRESENTATION_STYLE_ASSIGNMENT((#545364,#545369)); +#545364 = SURFACE_STYLE_USAGE(.BOTH.,#545365); +#545365 = SURFACE_SIDE_STYLE('',(#545366)); +#545366 = SURFACE_STYLE_FILL_AREA(#545367); +#545367 = FILL_AREA_STYLE('',(#545368)); +#545368 = FILL_AREA_STYLE_COLOUR('',#512501); +#545369 = CURVE_STYLE('',#545370,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545370 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545371 = STYLED_ITEM('color',(#545372),#165566); +#545372 = PRESENTATION_STYLE_ASSIGNMENT((#545373,#545378)); +#545373 = SURFACE_STYLE_USAGE(.BOTH.,#545374); +#545374 = SURFACE_SIDE_STYLE('',(#545375)); +#545375 = SURFACE_STYLE_FILL_AREA(#545376); +#545376 = FILL_AREA_STYLE('',(#545377)); +#545377 = FILL_AREA_STYLE_COLOUR('',#512501); +#545378 = CURVE_STYLE('',#545379,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545379 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545380 = STYLED_ITEM('color',(#545381),#165582); +#545381 = PRESENTATION_STYLE_ASSIGNMENT((#545382,#545387)); +#545382 = SURFACE_STYLE_USAGE(.BOTH.,#545383); +#545383 = SURFACE_SIDE_STYLE('',(#545384)); +#545384 = SURFACE_STYLE_FILL_AREA(#545385); +#545385 = FILL_AREA_STYLE('',(#545386)); +#545386 = FILL_AREA_STYLE_COLOUR('',#512538); +#545387 = CURVE_STYLE('',#545388,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545388 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545389 = STYLED_ITEM('color',(#545390),#165599); +#545390 = PRESENTATION_STYLE_ASSIGNMENT((#545391,#545396)); +#545391 = SURFACE_STYLE_USAGE(.BOTH.,#545392); +#545392 = SURFACE_SIDE_STYLE('',(#545393)); +#545393 = SURFACE_STYLE_FILL_AREA(#545394); +#545394 = FILL_AREA_STYLE('',(#545395)); +#545395 = FILL_AREA_STYLE_COLOUR('',#512538); +#545396 = CURVE_STYLE('',#545397,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545397 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545398 = STYLED_ITEM('color',(#545399),#165616); +#545399 = PRESENTATION_STYLE_ASSIGNMENT((#545400,#545405)); +#545400 = SURFACE_STYLE_USAGE(.BOTH.,#545401); +#545401 = SURFACE_SIDE_STYLE('',(#545402)); +#545402 = SURFACE_STYLE_FILL_AREA(#545403); +#545403 = FILL_AREA_STYLE('',(#545404)); +#545404 = FILL_AREA_STYLE_COLOUR('',#512538); +#545405 = CURVE_STYLE('',#545406,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545406 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545407 = STYLED_ITEM('color',(#545408),#165633); +#545408 = PRESENTATION_STYLE_ASSIGNMENT((#545409,#545414)); +#545409 = SURFACE_STYLE_USAGE(.BOTH.,#545410); +#545410 = SURFACE_SIDE_STYLE('',(#545411)); +#545411 = SURFACE_STYLE_FILL_AREA(#545412); +#545412 = FILL_AREA_STYLE('',(#545413)); +#545413 = FILL_AREA_STYLE_COLOUR('',#512538); +#545414 = CURVE_STYLE('',#545415,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545415 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545416 = STYLED_ITEM('color',(#545417),#165650); +#545417 = PRESENTATION_STYLE_ASSIGNMENT((#545418,#545423)); +#545418 = SURFACE_STYLE_USAGE(.BOTH.,#545419); +#545419 = SURFACE_SIDE_STYLE('',(#545420)); +#545420 = SURFACE_STYLE_FILL_AREA(#545421); +#545421 = FILL_AREA_STYLE('',(#545422)); +#545422 = FILL_AREA_STYLE_COLOUR('',#512538); +#545423 = CURVE_STYLE('',#545424,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545424 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545425 = STYLED_ITEM('color',(#545426),#165667); +#545426 = PRESENTATION_STYLE_ASSIGNMENT((#545427,#545432)); +#545427 = SURFACE_STYLE_USAGE(.BOTH.,#545428); +#545428 = SURFACE_SIDE_STYLE('',(#545429)); +#545429 = SURFACE_STYLE_FILL_AREA(#545430); +#545430 = FILL_AREA_STYLE('',(#545431)); +#545431 = FILL_AREA_STYLE_COLOUR('',#512538); +#545432 = CURVE_STYLE('',#545433,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545433 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545434 = STYLED_ITEM('color',(#545435),#165684); +#545435 = PRESENTATION_STYLE_ASSIGNMENT((#545436,#545441)); +#545436 = SURFACE_STYLE_USAGE(.BOTH.,#545437); +#545437 = SURFACE_SIDE_STYLE('',(#545438)); +#545438 = SURFACE_STYLE_FILL_AREA(#545439); +#545439 = FILL_AREA_STYLE('',(#545440)); +#545440 = FILL_AREA_STYLE_COLOUR('',#512538); +#545441 = CURVE_STYLE('',#545442,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545442 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545443 = STYLED_ITEM('color',(#545444),#165701); +#545444 = PRESENTATION_STYLE_ASSIGNMENT((#545445,#545450)); +#545445 = SURFACE_STYLE_USAGE(.BOTH.,#545446); +#545446 = SURFACE_SIDE_STYLE('',(#545447)); +#545447 = SURFACE_STYLE_FILL_AREA(#545448); +#545448 = FILL_AREA_STYLE('',(#545449)); +#545449 = FILL_AREA_STYLE_COLOUR('',#512538); +#545450 = CURVE_STYLE('',#545451,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545451 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545452 = STYLED_ITEM('color',(#545453),#165713); +#545453 = PRESENTATION_STYLE_ASSIGNMENT((#545454,#545459)); +#545454 = SURFACE_STYLE_USAGE(.BOTH.,#545455); +#545455 = SURFACE_SIDE_STYLE('',(#545456)); +#545456 = SURFACE_STYLE_FILL_AREA(#545457); +#545457 = FILL_AREA_STYLE('',(#545458)); +#545458 = FILL_AREA_STYLE_COLOUR('',#512501); +#545459 = CURVE_STYLE('',#545460,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545460 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545461 = STYLED_ITEM('color',(#545462),#165725); +#545462 = PRESENTATION_STYLE_ASSIGNMENT((#545463,#545468)); +#545463 = SURFACE_STYLE_USAGE(.BOTH.,#545464); +#545464 = SURFACE_SIDE_STYLE('',(#545465)); +#545465 = SURFACE_STYLE_FILL_AREA(#545466); +#545466 = FILL_AREA_STYLE('',(#545467)); +#545467 = FILL_AREA_STYLE_COLOUR('',#512538); +#545468 = CURVE_STYLE('',#545469,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545469 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545470 = STYLED_ITEM('color',(#545471),#165742); +#545471 = PRESENTATION_STYLE_ASSIGNMENT((#545472,#545477)); +#545472 = SURFACE_STYLE_USAGE(.BOTH.,#545473); +#545473 = SURFACE_SIDE_STYLE('',(#545474)); +#545474 = SURFACE_STYLE_FILL_AREA(#545475); +#545475 = FILL_AREA_STYLE('',(#545476)); +#545476 = FILL_AREA_STYLE_COLOUR('',#512538); +#545477 = CURVE_STYLE('',#545478,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545478 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545479 = STYLED_ITEM('color',(#545480),#165759); +#545480 = PRESENTATION_STYLE_ASSIGNMENT((#545481,#545486)); +#545481 = SURFACE_STYLE_USAGE(.BOTH.,#545482); +#545482 = SURFACE_SIDE_STYLE('',(#545483)); +#545483 = SURFACE_STYLE_FILL_AREA(#545484); +#545484 = FILL_AREA_STYLE('',(#545485)); +#545485 = FILL_AREA_STYLE_COLOUR('',#512538); +#545486 = CURVE_STYLE('',#545487,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545487 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545488 = STYLED_ITEM('color',(#545489),#165776); +#545489 = PRESENTATION_STYLE_ASSIGNMENT((#545490,#545495)); +#545490 = SURFACE_STYLE_USAGE(.BOTH.,#545491); +#545491 = SURFACE_SIDE_STYLE('',(#545492)); +#545492 = SURFACE_STYLE_FILL_AREA(#545493); +#545493 = FILL_AREA_STYLE('',(#545494)); +#545494 = FILL_AREA_STYLE_COLOUR('',#512538); +#545495 = CURVE_STYLE('',#545496,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545496 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545497 = STYLED_ITEM('color',(#545498),#165793); +#545498 = PRESENTATION_STYLE_ASSIGNMENT((#545499,#545504)); +#545499 = SURFACE_STYLE_USAGE(.BOTH.,#545500); +#545500 = SURFACE_SIDE_STYLE('',(#545501)); +#545501 = SURFACE_STYLE_FILL_AREA(#545502); +#545502 = FILL_AREA_STYLE('',(#545503)); +#545503 = FILL_AREA_STYLE_COLOUR('',#512538); +#545504 = CURVE_STYLE('',#545505,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545505 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545506 = STYLED_ITEM('color',(#545507),#165810); +#545507 = PRESENTATION_STYLE_ASSIGNMENT((#545508,#545513)); +#545508 = SURFACE_STYLE_USAGE(.BOTH.,#545509); +#545509 = SURFACE_SIDE_STYLE('',(#545510)); +#545510 = SURFACE_STYLE_FILL_AREA(#545511); +#545511 = FILL_AREA_STYLE('',(#545512)); +#545512 = FILL_AREA_STYLE_COLOUR('',#512538); +#545513 = CURVE_STYLE('',#545514,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545514 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545515 = STYLED_ITEM('color',(#545516),#165827); +#545516 = PRESENTATION_STYLE_ASSIGNMENT((#545517,#545522)); +#545517 = SURFACE_STYLE_USAGE(.BOTH.,#545518); +#545518 = SURFACE_SIDE_STYLE('',(#545519)); +#545519 = SURFACE_STYLE_FILL_AREA(#545520); +#545520 = FILL_AREA_STYLE('',(#545521)); +#545521 = FILL_AREA_STYLE_COLOUR('',#512538); +#545522 = CURVE_STYLE('',#545523,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545523 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545524 = STYLED_ITEM('color',(#545525),#165844); +#545525 = PRESENTATION_STYLE_ASSIGNMENT((#545526,#545531)); +#545526 = SURFACE_STYLE_USAGE(.BOTH.,#545527); +#545527 = SURFACE_SIDE_STYLE('',(#545528)); +#545528 = SURFACE_STYLE_FILL_AREA(#545529); +#545529 = FILL_AREA_STYLE('',(#545530)); +#545530 = FILL_AREA_STYLE_COLOUR('',#512538); +#545531 = CURVE_STYLE('',#545532,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545532 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545533 = STYLED_ITEM('color',(#545534),#165856); +#545534 = PRESENTATION_STYLE_ASSIGNMENT((#545535,#545540)); +#545535 = SURFACE_STYLE_USAGE(.BOTH.,#545536); +#545536 = SURFACE_SIDE_STYLE('',(#545537)); +#545537 = SURFACE_STYLE_FILL_AREA(#545538); +#545538 = FILL_AREA_STYLE('',(#545539)); +#545539 = FILL_AREA_STYLE_COLOUR('',#512538); +#545540 = CURVE_STYLE('',#545541,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545541 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545542 = STYLED_ITEM('color',(#545543),#165873); +#545543 = PRESENTATION_STYLE_ASSIGNMENT((#545544,#545549)); +#545544 = SURFACE_STYLE_USAGE(.BOTH.,#545545); +#545545 = SURFACE_SIDE_STYLE('',(#545546)); +#545546 = SURFACE_STYLE_FILL_AREA(#545547); +#545547 = FILL_AREA_STYLE('',(#545548)); +#545548 = FILL_AREA_STYLE_COLOUR('',#512538); +#545549 = CURVE_STYLE('',#545550,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545550 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545551 = STYLED_ITEM('color',(#545552),#165890); +#545552 = PRESENTATION_STYLE_ASSIGNMENT((#545553,#545558)); +#545553 = SURFACE_STYLE_USAGE(.BOTH.,#545554); +#545554 = SURFACE_SIDE_STYLE('',(#545555)); +#545555 = SURFACE_STYLE_FILL_AREA(#545556); +#545556 = FILL_AREA_STYLE('',(#545557)); +#545557 = FILL_AREA_STYLE_COLOUR('',#512538); +#545558 = CURVE_STYLE('',#545559,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545559 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545560 = STYLED_ITEM('color',(#545561),#165907); +#545561 = PRESENTATION_STYLE_ASSIGNMENT((#545562,#545567)); +#545562 = SURFACE_STYLE_USAGE(.BOTH.,#545563); +#545563 = SURFACE_SIDE_STYLE('',(#545564)); +#545564 = SURFACE_STYLE_FILL_AREA(#545565); +#545565 = FILL_AREA_STYLE('',(#545566)); +#545566 = FILL_AREA_STYLE_COLOUR('',#512538); +#545567 = CURVE_STYLE('',#545568,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545568 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545569 = STYLED_ITEM('color',(#545570),#165924); +#545570 = PRESENTATION_STYLE_ASSIGNMENT((#545571,#545576)); +#545571 = SURFACE_STYLE_USAGE(.BOTH.,#545572); +#545572 = SURFACE_SIDE_STYLE('',(#545573)); +#545573 = SURFACE_STYLE_FILL_AREA(#545574); +#545574 = FILL_AREA_STYLE('',(#545575)); +#545575 = FILL_AREA_STYLE_COLOUR('',#512538); +#545576 = CURVE_STYLE('',#545577,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545577 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545578 = STYLED_ITEM('color',(#545579),#165941); +#545579 = PRESENTATION_STYLE_ASSIGNMENT((#545580,#545585)); +#545580 = SURFACE_STYLE_USAGE(.BOTH.,#545581); +#545581 = SURFACE_SIDE_STYLE('',(#545582)); +#545582 = SURFACE_STYLE_FILL_AREA(#545583); +#545583 = FILL_AREA_STYLE('',(#545584)); +#545584 = FILL_AREA_STYLE_COLOUR('',#512538); +#545585 = CURVE_STYLE('',#545586,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545586 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545587 = STYLED_ITEM('color',(#545588),#165958); +#545588 = PRESENTATION_STYLE_ASSIGNMENT((#545589,#545594)); +#545589 = SURFACE_STYLE_USAGE(.BOTH.,#545590); +#545590 = SURFACE_SIDE_STYLE('',(#545591)); +#545591 = SURFACE_STYLE_FILL_AREA(#545592); +#545592 = FILL_AREA_STYLE('',(#545593)); +#545593 = FILL_AREA_STYLE_COLOUR('',#512538); +#545594 = CURVE_STYLE('',#545595,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545595 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545596 = STYLED_ITEM('color',(#545597),#165970); +#545597 = PRESENTATION_STYLE_ASSIGNMENT((#545598,#545603)); +#545598 = SURFACE_STYLE_USAGE(.BOTH.,#545599); +#545599 = SURFACE_SIDE_STYLE('',(#545600)); +#545600 = SURFACE_STYLE_FILL_AREA(#545601); +#545601 = FILL_AREA_STYLE('',(#545602)); +#545602 = FILL_AREA_STYLE_COLOUR('',#512989); +#545603 = CURVE_STYLE('',#545604,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#545604 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545605 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #545606,#545615,#545624,#545633,#545642,#545651,#545660,#545669, + #545678,#545687,#545696,#545705,#545714,#545723,#545732,#545741, + #545750,#545759,#545768,#545777,#545786,#545795,#545804,#545813, + #545822,#545831,#545840,#545849,#545858,#545867,#545876,#545885, + #545894,#545903,#545912,#545921,#545930,#545939,#545948,#545957, + #545966,#545975,#545984,#545993,#546002,#546011,#546020,#546029, + #546038,#546047,#546056,#546065,#546074,#546083,#546092,#546101, + #546110,#546119,#546128,#546137,#546146,#546155,#546164,#546173, + #546182,#546191,#546200,#546209,#546218),#158521); +#545606 = STYLED_ITEM('color',(#545607),#156541); +#545607 = PRESENTATION_STYLE_ASSIGNMENT((#545608,#545613)); +#545608 = SURFACE_STYLE_USAGE(.BOTH.,#545609); +#545609 = SURFACE_SIDE_STYLE('',(#545610)); +#545610 = SURFACE_STYLE_FILL_AREA(#545611); +#545611 = FILL_AREA_STYLE('',(#545612)); +#545612 = FILL_AREA_STYLE_COLOUR('',#512501); +#545613 = CURVE_STYLE('',#545614,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545614 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545615 = STYLED_ITEM('color',(#545616),#156579); +#545616 = PRESENTATION_STYLE_ASSIGNMENT((#545617,#545622)); +#545617 = SURFACE_STYLE_USAGE(.BOTH.,#545618); +#545618 = SURFACE_SIDE_STYLE('',(#545619)); +#545619 = SURFACE_STYLE_FILL_AREA(#545620); +#545620 = FILL_AREA_STYLE('',(#545621)); +#545621 = FILL_AREA_STYLE_COLOUR('',#512501); +#545622 = CURVE_STYLE('',#545623,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545623 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545624 = STYLED_ITEM('color',(#545625),#156642); +#545625 = PRESENTATION_STYLE_ASSIGNMENT((#545626,#545631)); +#545626 = SURFACE_STYLE_USAGE(.BOTH.,#545627); +#545627 = SURFACE_SIDE_STYLE('',(#545628)); +#545628 = SURFACE_STYLE_FILL_AREA(#545629); +#545629 = FILL_AREA_STYLE('',(#545630)); +#545630 = FILL_AREA_STYLE_COLOUR('',#512501); +#545631 = CURVE_STYLE('',#545632,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545632 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545633 = STYLED_ITEM('color',(#545634),#156665); +#545634 = PRESENTATION_STYLE_ASSIGNMENT((#545635,#545640)); +#545635 = SURFACE_STYLE_USAGE(.BOTH.,#545636); +#545636 = SURFACE_SIDE_STYLE('',(#545637)); +#545637 = SURFACE_STYLE_FILL_AREA(#545638); +#545638 = FILL_AREA_STYLE('',(#545639)); +#545639 = FILL_AREA_STYLE_COLOUR('',#512501); +#545640 = CURVE_STYLE('',#545641,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545641 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545642 = STYLED_ITEM('color',(#545643),#156694); +#545643 = PRESENTATION_STYLE_ASSIGNMENT((#545644,#545649)); +#545644 = SURFACE_STYLE_USAGE(.BOTH.,#545645); +#545645 = SURFACE_SIDE_STYLE('',(#545646)); +#545646 = SURFACE_STYLE_FILL_AREA(#545647); +#545647 = FILL_AREA_STYLE('',(#545648)); +#545648 = FILL_AREA_STYLE_COLOUR('',#512501); +#545649 = CURVE_STYLE('',#545650,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545650 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545651 = STYLED_ITEM('color',(#545652),#156717); +#545652 = PRESENTATION_STYLE_ASSIGNMENT((#545653,#545658)); +#545653 = SURFACE_STYLE_USAGE(.BOTH.,#545654); +#545654 = SURFACE_SIDE_STYLE('',(#545655)); +#545655 = SURFACE_STYLE_FILL_AREA(#545656); +#545656 = FILL_AREA_STYLE('',(#545657)); +#545657 = FILL_AREA_STYLE_COLOUR('',#512501); +#545658 = CURVE_STYLE('',#545659,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545659 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545660 = STYLED_ITEM('color',(#545661),#156772); +#545661 = PRESENTATION_STYLE_ASSIGNMENT((#545662,#545667)); +#545662 = SURFACE_STYLE_USAGE(.BOTH.,#545663); +#545663 = SURFACE_SIDE_STYLE('',(#545664)); +#545664 = SURFACE_STYLE_FILL_AREA(#545665); +#545665 = FILL_AREA_STYLE('',(#545666)); +#545666 = FILL_AREA_STYLE_COLOUR('',#512501); +#545667 = CURVE_STYLE('',#545668,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545668 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545669 = STYLED_ITEM('color',(#545670),#156811); +#545670 = PRESENTATION_STYLE_ASSIGNMENT((#545671,#545676)); +#545671 = SURFACE_STYLE_USAGE(.BOTH.,#545672); +#545672 = SURFACE_SIDE_STYLE('',(#545673)); +#545673 = SURFACE_STYLE_FILL_AREA(#545674); +#545674 = FILL_AREA_STYLE('',(#545675)); +#545675 = FILL_AREA_STYLE_COLOUR('',#512501); +#545676 = CURVE_STYLE('',#545677,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545677 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545678 = STYLED_ITEM('color',(#545679),#156834); +#545679 = PRESENTATION_STYLE_ASSIGNMENT((#545680,#545685)); +#545680 = SURFACE_STYLE_USAGE(.BOTH.,#545681); +#545681 = SURFACE_SIDE_STYLE('',(#545682)); +#545682 = SURFACE_STYLE_FILL_AREA(#545683); +#545683 = FILL_AREA_STYLE('',(#545684)); +#545684 = FILL_AREA_STYLE_COLOUR('',#512501); +#545685 = CURVE_STYLE('',#545686,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545686 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545687 = STYLED_ITEM('color',(#545688),#156857); +#545688 = PRESENTATION_STYLE_ASSIGNMENT((#545689,#545694)); +#545689 = SURFACE_STYLE_USAGE(.BOTH.,#545690); +#545690 = SURFACE_SIDE_STYLE('',(#545691)); +#545691 = SURFACE_STYLE_FILL_AREA(#545692); +#545692 = FILL_AREA_STYLE('',(#545693)); +#545693 = FILL_AREA_STYLE_COLOUR('',#512501); +#545694 = CURVE_STYLE('',#545695,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545695 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545696 = STYLED_ITEM('color',(#545697),#156874); +#545697 = PRESENTATION_STYLE_ASSIGNMENT((#545698,#545703)); +#545698 = SURFACE_STYLE_USAGE(.BOTH.,#545699); +#545699 = SURFACE_SIDE_STYLE('',(#545700)); +#545700 = SURFACE_STYLE_FILL_AREA(#545701); +#545701 = FILL_AREA_STYLE('',(#545702)); +#545702 = FILL_AREA_STYLE_COLOUR('',#512501); +#545703 = CURVE_STYLE('',#545704,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545704 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545705 = STYLED_ITEM('color',(#545706),#156897); +#545706 = PRESENTATION_STYLE_ASSIGNMENT((#545707,#545712)); +#545707 = SURFACE_STYLE_USAGE(.BOTH.,#545708); +#545708 = SURFACE_SIDE_STYLE('',(#545709)); +#545709 = SURFACE_STYLE_FILL_AREA(#545710); +#545710 = FILL_AREA_STYLE('',(#545711)); +#545711 = FILL_AREA_STYLE_COLOUR('',#512501); +#545712 = CURVE_STYLE('',#545713,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545713 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545714 = STYLED_ITEM('color',(#545715),#156985); +#545715 = PRESENTATION_STYLE_ASSIGNMENT((#545716,#545721)); +#545716 = SURFACE_STYLE_USAGE(.BOTH.,#545717); +#545717 = SURFACE_SIDE_STYLE('',(#545718)); +#545718 = SURFACE_STYLE_FILL_AREA(#545719); +#545719 = FILL_AREA_STYLE('',(#545720)); +#545720 = FILL_AREA_STYLE_COLOUR('',#512501); +#545721 = CURVE_STYLE('',#545722,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545722 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545723 = STYLED_ITEM('color',(#545724),#157001); +#545724 = PRESENTATION_STYLE_ASSIGNMENT((#545725,#545730)); +#545725 = SURFACE_STYLE_USAGE(.BOTH.,#545726); +#545726 = SURFACE_SIDE_STYLE('',(#545727)); +#545727 = SURFACE_STYLE_FILL_AREA(#545728); +#545728 = FILL_AREA_STYLE('',(#545729)); +#545729 = FILL_AREA_STYLE_COLOUR('',#512501); +#545730 = CURVE_STYLE('',#545731,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545731 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545732 = STYLED_ITEM('color',(#545733),#157031); +#545733 = PRESENTATION_STYLE_ASSIGNMENT((#545734,#545739)); +#545734 = SURFACE_STYLE_USAGE(.BOTH.,#545735); +#545735 = SURFACE_SIDE_STYLE('',(#545736)); +#545736 = SURFACE_STYLE_FILL_AREA(#545737); +#545737 = FILL_AREA_STYLE('',(#545738)); +#545738 = FILL_AREA_STYLE_COLOUR('',#512538); +#545739 = CURVE_STYLE('',#545740,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545740 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545741 = STYLED_ITEM('color',(#545742),#157064); +#545742 = PRESENTATION_STYLE_ASSIGNMENT((#545743,#545748)); +#545743 = SURFACE_STYLE_USAGE(.BOTH.,#545744); +#545744 = SURFACE_SIDE_STYLE('',(#545745)); +#545745 = SURFACE_STYLE_FILL_AREA(#545746); +#545746 = FILL_AREA_STYLE('',(#545747)); +#545747 = FILL_AREA_STYLE_COLOUR('',#512501); +#545748 = CURVE_STYLE('',#545749,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545749 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545750 = STYLED_ITEM('color',(#545751),#157095); +#545751 = PRESENTATION_STYLE_ASSIGNMENT((#545752,#545757)); +#545752 = SURFACE_STYLE_USAGE(.BOTH.,#545753); +#545753 = SURFACE_SIDE_STYLE('',(#545754)); +#545754 = SURFACE_STYLE_FILL_AREA(#545755); +#545755 = FILL_AREA_STYLE('',(#545756)); +#545756 = FILL_AREA_STYLE_COLOUR('',#512538); +#545757 = CURVE_STYLE('',#545758,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545758 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545759 = STYLED_ITEM('color',(#545760),#157128); +#545760 = PRESENTATION_STYLE_ASSIGNMENT((#545761,#545766)); +#545761 = SURFACE_STYLE_USAGE(.BOTH.,#545762); +#545762 = SURFACE_SIDE_STYLE('',(#545763)); +#545763 = SURFACE_STYLE_FILL_AREA(#545764); +#545764 = FILL_AREA_STYLE('',(#545765)); +#545765 = FILL_AREA_STYLE_COLOUR('',#512501); +#545766 = CURVE_STYLE('',#545767,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545767 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545768 = STYLED_ITEM('color',(#545769),#157145); +#545769 = PRESENTATION_STYLE_ASSIGNMENT((#545770,#545775)); +#545770 = SURFACE_STYLE_USAGE(.BOTH.,#545771); +#545771 = SURFACE_SIDE_STYLE('',(#545772)); +#545772 = SURFACE_STYLE_FILL_AREA(#545773); +#545773 = FILL_AREA_STYLE('',(#545774)); +#545774 = FILL_AREA_STYLE_COLOUR('',#512501); +#545775 = CURVE_STYLE('',#545776,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545776 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545777 = STYLED_ITEM('color',(#545778),#157162); +#545778 = PRESENTATION_STYLE_ASSIGNMENT((#545779,#545784)); +#545779 = SURFACE_STYLE_USAGE(.BOTH.,#545780); +#545780 = SURFACE_SIDE_STYLE('',(#545781)); +#545781 = SURFACE_STYLE_FILL_AREA(#545782); +#545782 = FILL_AREA_STYLE('',(#545783)); +#545783 = FILL_AREA_STYLE_COLOUR('',#512538); +#545784 = CURVE_STYLE('',#545785,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545786 = STYLED_ITEM('color',(#545787),#157195); +#545787 = PRESENTATION_STYLE_ASSIGNMENT((#545788,#545793)); +#545788 = SURFACE_STYLE_USAGE(.BOTH.,#545789); +#545789 = SURFACE_SIDE_STYLE('',(#545790)); +#545790 = SURFACE_STYLE_FILL_AREA(#545791); +#545791 = FILL_AREA_STYLE('',(#545792)); +#545792 = FILL_AREA_STYLE_COLOUR('',#512501); +#545793 = CURVE_STYLE('',#545794,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545794 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545795 = STYLED_ITEM('color',(#545796),#157225); +#545796 = PRESENTATION_STYLE_ASSIGNMENT((#545797,#545802)); +#545797 = SURFACE_STYLE_USAGE(.BOTH.,#545798); +#545798 = SURFACE_SIDE_STYLE('',(#545799)); +#545799 = SURFACE_STYLE_FILL_AREA(#545800); +#545800 = FILL_AREA_STYLE('',(#545801)); +#545801 = FILL_AREA_STYLE_COLOUR('',#512501); +#545802 = CURVE_STYLE('',#545803,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545803 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545804 = STYLED_ITEM('color',(#545805),#157248); +#545805 = PRESENTATION_STYLE_ASSIGNMENT((#545806,#545811)); +#545806 = SURFACE_STYLE_USAGE(.BOTH.,#545807); +#545807 = SURFACE_SIDE_STYLE('',(#545808)); +#545808 = SURFACE_STYLE_FILL_AREA(#545809); +#545809 = FILL_AREA_STYLE('',(#545810)); +#545810 = FILL_AREA_STYLE_COLOUR('',#512501); +#545811 = CURVE_STYLE('',#545812,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545812 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545813 = STYLED_ITEM('color',(#545814),#157271); +#545814 = PRESENTATION_STYLE_ASSIGNMENT((#545815,#545820)); +#545815 = SURFACE_STYLE_USAGE(.BOTH.,#545816); +#545816 = SURFACE_SIDE_STYLE('',(#545817)); +#545817 = SURFACE_STYLE_FILL_AREA(#545818); +#545818 = FILL_AREA_STYLE('',(#545819)); +#545819 = FILL_AREA_STYLE_COLOUR('',#512501); +#545820 = CURVE_STYLE('',#545821,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545821 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545822 = STYLED_ITEM('color',(#545823),#157288); +#545823 = PRESENTATION_STYLE_ASSIGNMENT((#545824,#545829)); +#545824 = SURFACE_STYLE_USAGE(.BOTH.,#545825); +#545825 = SURFACE_SIDE_STYLE('',(#545826)); +#545826 = SURFACE_STYLE_FILL_AREA(#545827); +#545827 = FILL_AREA_STYLE('',(#545828)); +#545828 = FILL_AREA_STYLE_COLOUR('',#512538); +#545829 = CURVE_STYLE('',#545830,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545830 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545831 = STYLED_ITEM('color',(#545832),#157317); +#545832 = PRESENTATION_STYLE_ASSIGNMENT((#545833,#545838)); +#545833 = SURFACE_STYLE_USAGE(.BOTH.,#545834); +#545834 = SURFACE_SIDE_STYLE('',(#545835)); +#545835 = SURFACE_STYLE_FILL_AREA(#545836); +#545836 = FILL_AREA_STYLE('',(#545837)); +#545837 = FILL_AREA_STYLE_COLOUR('',#512501); +#545838 = CURVE_STYLE('',#545839,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545839 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545840 = STYLED_ITEM('color',(#545841),#157371); +#545841 = PRESENTATION_STYLE_ASSIGNMENT((#545842,#545847)); +#545842 = SURFACE_STYLE_USAGE(.BOTH.,#545843); +#545843 = SURFACE_SIDE_STYLE('',(#545844)); +#545844 = SURFACE_STYLE_FILL_AREA(#545845); +#545845 = FILL_AREA_STYLE('',(#545846)); +#545846 = FILL_AREA_STYLE_COLOUR('',#512501); +#545847 = CURVE_STYLE('',#545848,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545848 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545849 = STYLED_ITEM('color',(#545850),#157394); +#545850 = PRESENTATION_STYLE_ASSIGNMENT((#545851,#545856)); +#545851 = SURFACE_STYLE_USAGE(.BOTH.,#545852); +#545852 = SURFACE_SIDE_STYLE('',(#545853)); +#545853 = SURFACE_STYLE_FILL_AREA(#545854); +#545854 = FILL_AREA_STYLE('',(#545855)); +#545855 = FILL_AREA_STYLE_COLOUR('',#512501); +#545856 = CURVE_STYLE('',#545857,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545857 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545858 = STYLED_ITEM('color',(#545859),#157417); +#545859 = PRESENTATION_STYLE_ASSIGNMENT((#545860,#545865)); +#545860 = SURFACE_STYLE_USAGE(.BOTH.,#545861); +#545861 = SURFACE_SIDE_STYLE('',(#545862)); +#545862 = SURFACE_STYLE_FILL_AREA(#545863); +#545863 = FILL_AREA_STYLE('',(#545864)); +#545864 = FILL_AREA_STYLE_COLOUR('',#512501); +#545865 = CURVE_STYLE('',#545866,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545866 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545867 = STYLED_ITEM('color',(#545868),#157440); +#545868 = PRESENTATION_STYLE_ASSIGNMENT((#545869,#545874)); +#545869 = SURFACE_STYLE_USAGE(.BOTH.,#545870); +#545870 = SURFACE_SIDE_STYLE('',(#545871)); +#545871 = SURFACE_STYLE_FILL_AREA(#545872); +#545872 = FILL_AREA_STYLE('',(#545873)); +#545873 = FILL_AREA_STYLE_COLOUR('',#512501); +#545874 = CURVE_STYLE('',#545875,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545875 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545876 = STYLED_ITEM('color',(#545877),#157479); +#545877 = PRESENTATION_STYLE_ASSIGNMENT((#545878,#545883)); +#545878 = SURFACE_STYLE_USAGE(.BOTH.,#545879); +#545879 = SURFACE_SIDE_STYLE('',(#545880)); +#545880 = SURFACE_STYLE_FILL_AREA(#545881); +#545881 = FILL_AREA_STYLE('',(#545882)); +#545882 = FILL_AREA_STYLE_COLOUR('',#512538); +#545883 = CURVE_STYLE('',#545884,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545884 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545885 = STYLED_ITEM('color',(#545886),#157501); +#545886 = PRESENTATION_STYLE_ASSIGNMENT((#545887,#545892)); +#545887 = SURFACE_STYLE_USAGE(.BOTH.,#545888); +#545888 = SURFACE_SIDE_STYLE('',(#545889)); +#545889 = SURFACE_STYLE_FILL_AREA(#545890); +#545890 = FILL_AREA_STYLE('',(#545891)); +#545891 = FILL_AREA_STYLE_COLOUR('',#512501); +#545892 = CURVE_STYLE('',#545893,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545893 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545894 = STYLED_ITEM('color',(#545895),#157545); +#545895 = PRESENTATION_STYLE_ASSIGNMENT((#545896,#545901)); +#545896 = SURFACE_STYLE_USAGE(.BOTH.,#545897); +#545897 = SURFACE_SIDE_STYLE('',(#545898)); +#545898 = SURFACE_STYLE_FILL_AREA(#545899); +#545899 = FILL_AREA_STYLE('',(#545900)); +#545900 = FILL_AREA_STYLE_COLOUR('',#512538); +#545901 = CURVE_STYLE('',#545902,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545902 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545903 = STYLED_ITEM('color',(#545904),#157620); +#545904 = PRESENTATION_STYLE_ASSIGNMENT((#545905,#545910)); +#545905 = SURFACE_STYLE_USAGE(.BOTH.,#545906); +#545906 = SURFACE_SIDE_STYLE('',(#545907)); +#545907 = SURFACE_STYLE_FILL_AREA(#545908); +#545908 = FILL_AREA_STYLE('',(#545909)); +#545909 = FILL_AREA_STYLE_COLOUR('',#512538); +#545910 = CURVE_STYLE('',#545911,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545911 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545912 = STYLED_ITEM('color',(#545913),#157644); +#545913 = PRESENTATION_STYLE_ASSIGNMENT((#545914,#545919)); +#545914 = SURFACE_STYLE_USAGE(.BOTH.,#545915); +#545915 = SURFACE_SIDE_STYLE('',(#545916)); +#545916 = SURFACE_STYLE_FILL_AREA(#545917); +#545917 = FILL_AREA_STYLE('',(#545918)); +#545918 = FILL_AREA_STYLE_COLOUR('',#512538); +#545919 = CURVE_STYLE('',#545920,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545920 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545921 = STYLED_ITEM('color',(#545922),#157712); +#545922 = PRESENTATION_STYLE_ASSIGNMENT((#545923,#545928)); +#545923 = SURFACE_STYLE_USAGE(.BOTH.,#545924); +#545924 = SURFACE_SIDE_STYLE('',(#545925)); +#545925 = SURFACE_STYLE_FILL_AREA(#545926); +#545926 = FILL_AREA_STYLE('',(#545927)); +#545927 = FILL_AREA_STYLE_COLOUR('',#512501); +#545928 = CURVE_STYLE('',#545929,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#545929 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545930 = STYLED_ITEM('color',(#545931),#157729); +#545931 = PRESENTATION_STYLE_ASSIGNMENT((#545932,#545937)); +#545932 = SURFACE_STYLE_USAGE(.BOTH.,#545933); +#545933 = SURFACE_SIDE_STYLE('',(#545934)); +#545934 = SURFACE_STYLE_FILL_AREA(#545935); +#545935 = FILL_AREA_STYLE('',(#545936)); +#545936 = FILL_AREA_STYLE_COLOUR('',#512538); +#545937 = CURVE_STYLE('',#545938,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545938 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545939 = STYLED_ITEM('color',(#545940),#157804); +#545940 = PRESENTATION_STYLE_ASSIGNMENT((#545941,#545946)); +#545941 = SURFACE_STYLE_USAGE(.BOTH.,#545942); +#545942 = SURFACE_SIDE_STYLE('',(#545943)); +#545943 = SURFACE_STYLE_FILL_AREA(#545944); +#545944 = FILL_AREA_STYLE('',(#545945)); +#545945 = FILL_AREA_STYLE_COLOUR('',#512538); +#545946 = CURVE_STYLE('',#545947,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545947 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545948 = STYLED_ITEM('color',(#545949),#157828); +#545949 = PRESENTATION_STYLE_ASSIGNMENT((#545950,#545955)); +#545950 = SURFACE_STYLE_USAGE(.BOTH.,#545951); +#545951 = SURFACE_SIDE_STYLE('',(#545952)); +#545952 = SURFACE_STYLE_FILL_AREA(#545953); +#545953 = FILL_AREA_STYLE('',(#545954)); +#545954 = FILL_AREA_STYLE_COLOUR('',#512538); +#545955 = CURVE_STYLE('',#545956,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545956 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545957 = STYLED_ITEM('color',(#545958),#157896); +#545958 = PRESENTATION_STYLE_ASSIGNMENT((#545959,#545964)); +#545959 = SURFACE_STYLE_USAGE(.BOTH.,#545960); +#545960 = SURFACE_SIDE_STYLE('',(#545961)); +#545961 = SURFACE_STYLE_FILL_AREA(#545962); +#545962 = FILL_AREA_STYLE('',(#545963)); +#545963 = FILL_AREA_STYLE_COLOUR('',#512538); +#545964 = CURVE_STYLE('',#545965,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545965 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545966 = STYLED_ITEM('color',(#545967),#157971); +#545967 = PRESENTATION_STYLE_ASSIGNMENT((#545968,#545973)); +#545968 = SURFACE_STYLE_USAGE(.BOTH.,#545969); +#545969 = SURFACE_SIDE_STYLE('',(#545970)); +#545970 = SURFACE_STYLE_FILL_AREA(#545971); +#545971 = FILL_AREA_STYLE('',(#545972)); +#545972 = FILL_AREA_STYLE_COLOUR('',#512538); +#545973 = CURVE_STYLE('',#545974,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545974 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545975 = STYLED_ITEM('color',(#545976),#157995); +#545976 = PRESENTATION_STYLE_ASSIGNMENT((#545977,#545982)); +#545977 = SURFACE_STYLE_USAGE(.BOTH.,#545978); +#545978 = SURFACE_SIDE_STYLE('',(#545979)); +#545979 = SURFACE_STYLE_FILL_AREA(#545980); +#545980 = FILL_AREA_STYLE('',(#545981)); +#545981 = FILL_AREA_STYLE_COLOUR('',#512538); +#545982 = CURVE_STYLE('',#545983,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545983 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545984 = STYLED_ITEM('color',(#545985),#158063); +#545985 = PRESENTATION_STYLE_ASSIGNMENT((#545986,#545991)); +#545986 = SURFACE_STYLE_USAGE(.BOTH.,#545987); +#545987 = SURFACE_SIDE_STYLE('',(#545988)); +#545988 = SURFACE_STYLE_FILL_AREA(#545989); +#545989 = FILL_AREA_STYLE('',(#545990)); +#545990 = FILL_AREA_STYLE_COLOUR('',#512538); +#545991 = CURVE_STYLE('',#545992,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#545992 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#545993 = STYLED_ITEM('color',(#545994),#158080); +#545994 = PRESENTATION_STYLE_ASSIGNMENT((#545995,#546000)); +#545995 = SURFACE_STYLE_USAGE(.BOTH.,#545996); +#545996 = SURFACE_SIDE_STYLE('',(#545997)); +#545997 = SURFACE_STYLE_FILL_AREA(#545998); +#545998 = FILL_AREA_STYLE('',(#545999)); +#545999 = FILL_AREA_STYLE_COLOUR('',#512538); +#546000 = CURVE_STYLE('',#546001,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546001 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546002 = STYLED_ITEM('color',(#546003),#158097); +#546003 = PRESENTATION_STYLE_ASSIGNMENT((#546004,#546009)); +#546004 = SURFACE_STYLE_USAGE(.BOTH.,#546005); +#546005 = SURFACE_SIDE_STYLE('',(#546006)); +#546006 = SURFACE_STYLE_FILL_AREA(#546007); +#546007 = FILL_AREA_STYLE('',(#546008)); +#546008 = FILL_AREA_STYLE_COLOUR('',#512501); +#546009 = CURVE_STYLE('',#546010,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#546010 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546011 = STYLED_ITEM('color',(#546012),#158143); +#546012 = PRESENTATION_STYLE_ASSIGNMENT((#546013,#546018)); +#546013 = SURFACE_STYLE_USAGE(.BOTH.,#546014); +#546014 = SURFACE_SIDE_STYLE('',(#546015)); +#546015 = SURFACE_STYLE_FILL_AREA(#546016); +#546016 = FILL_AREA_STYLE('',(#546017)); +#546017 = FILL_AREA_STYLE_COLOUR('',#512501); +#546018 = CURVE_STYLE('',#546019,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#546019 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546020 = STYLED_ITEM('color',(#546021),#158159); +#546021 = PRESENTATION_STYLE_ASSIGNMENT((#546022,#546027)); +#546022 = SURFACE_STYLE_USAGE(.BOTH.,#546023); +#546023 = SURFACE_SIDE_STYLE('',(#546024)); +#546024 = SURFACE_STYLE_FILL_AREA(#546025); +#546025 = FILL_AREA_STYLE('',(#546026)); +#546026 = FILL_AREA_STYLE_COLOUR('',#512501); +#546027 = CURVE_STYLE('',#546028,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#546028 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546029 = STYLED_ITEM('color',(#546030),#158175); +#546030 = PRESENTATION_STYLE_ASSIGNMENT((#546031,#546036)); +#546031 = SURFACE_STYLE_USAGE(.BOTH.,#546032); +#546032 = SURFACE_SIDE_STYLE('',(#546033)); +#546033 = SURFACE_STYLE_FILL_AREA(#546034); +#546034 = FILL_AREA_STYLE('',(#546035)); +#546035 = FILL_AREA_STYLE_COLOUR('',#512538); +#546036 = CURVE_STYLE('',#546037,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546037 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546038 = STYLED_ITEM('color',(#546039),#158192); +#546039 = PRESENTATION_STYLE_ASSIGNMENT((#546040,#546045)); +#546040 = SURFACE_STYLE_USAGE(.BOTH.,#546041); +#546041 = SURFACE_SIDE_STYLE('',(#546042)); +#546042 = SURFACE_STYLE_FILL_AREA(#546043); +#546043 = FILL_AREA_STYLE('',(#546044)); +#546044 = FILL_AREA_STYLE_COLOUR('',#512501); +#546045 = CURVE_STYLE('',#546046,POSITIVE_LENGTH_MEASURE(0.1),#512501); +#546046 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546047 = STYLED_ITEM('color',(#546048),#158204); +#546048 = PRESENTATION_STYLE_ASSIGNMENT((#546049,#546054)); +#546049 = SURFACE_STYLE_USAGE(.BOTH.,#546050); +#546050 = SURFACE_SIDE_STYLE('',(#546051)); +#546051 = SURFACE_STYLE_FILL_AREA(#546052); +#546052 = FILL_AREA_STYLE('',(#546053)); +#546053 = FILL_AREA_STYLE_COLOUR('',#512538); +#546054 = CURVE_STYLE('',#546055,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546055 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546056 = STYLED_ITEM('color',(#546057),#158221); +#546057 = PRESENTATION_STYLE_ASSIGNMENT((#546058,#546063)); +#546058 = SURFACE_STYLE_USAGE(.BOTH.,#546059); +#546059 = SURFACE_SIDE_STYLE('',(#546060)); +#546060 = SURFACE_STYLE_FILL_AREA(#546061); +#546061 = FILL_AREA_STYLE('',(#546062)); +#546062 = FILL_AREA_STYLE_COLOUR('',#512538); +#546063 = CURVE_STYLE('',#546064,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546064 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546065 = STYLED_ITEM('color',(#546066),#158238); +#546066 = PRESENTATION_STYLE_ASSIGNMENT((#546067,#546072)); +#546067 = SURFACE_STYLE_USAGE(.BOTH.,#546068); +#546068 = SURFACE_SIDE_STYLE('',(#546069)); +#546069 = SURFACE_STYLE_FILL_AREA(#546070); +#546070 = FILL_AREA_STYLE('',(#546071)); +#546071 = FILL_AREA_STYLE_COLOUR('',#512538); +#546072 = CURVE_STYLE('',#546073,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546073 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546074 = STYLED_ITEM('color',(#546075),#158255); +#546075 = PRESENTATION_STYLE_ASSIGNMENT((#546076,#546081)); +#546076 = SURFACE_STYLE_USAGE(.BOTH.,#546077); +#546077 = SURFACE_SIDE_STYLE('',(#546078)); +#546078 = SURFACE_STYLE_FILL_AREA(#546079); +#546079 = FILL_AREA_STYLE('',(#546080)); +#546080 = FILL_AREA_STYLE_COLOUR('',#512538); +#546081 = CURVE_STYLE('',#546082,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546082 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546083 = STYLED_ITEM('color',(#546084),#158272); +#546084 = PRESENTATION_STYLE_ASSIGNMENT((#546085,#546090)); +#546085 = SURFACE_STYLE_USAGE(.BOTH.,#546086); +#546086 = SURFACE_SIDE_STYLE('',(#546087)); +#546087 = SURFACE_STYLE_FILL_AREA(#546088); +#546088 = FILL_AREA_STYLE('',(#546089)); +#546089 = FILL_AREA_STYLE_COLOUR('',#512538); +#546090 = CURVE_STYLE('',#546091,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546091 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546092 = STYLED_ITEM('color',(#546093),#158289); +#546093 = PRESENTATION_STYLE_ASSIGNMENT((#546094,#546099)); +#546094 = SURFACE_STYLE_USAGE(.BOTH.,#546095); +#546095 = SURFACE_SIDE_STYLE('',(#546096)); +#546096 = SURFACE_STYLE_FILL_AREA(#546097); +#546097 = FILL_AREA_STYLE('',(#546098)); +#546098 = FILL_AREA_STYLE_COLOUR('',#512538); +#546099 = CURVE_STYLE('',#546100,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546100 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546101 = STYLED_ITEM('color',(#546102),#158306); +#546102 = PRESENTATION_STYLE_ASSIGNMENT((#546103,#546108)); +#546103 = SURFACE_STYLE_USAGE(.BOTH.,#546104); +#546104 = SURFACE_SIDE_STYLE('',(#546105)); +#546105 = SURFACE_STYLE_FILL_AREA(#546106); +#546106 = FILL_AREA_STYLE('',(#546107)); +#546107 = FILL_AREA_STYLE_COLOUR('',#512538); +#546108 = CURVE_STYLE('',#546109,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546109 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546110 = STYLED_ITEM('color',(#546111),#158318); +#546111 = PRESENTATION_STYLE_ASSIGNMENT((#546112,#546117)); +#546112 = SURFACE_STYLE_USAGE(.BOTH.,#546113); +#546113 = SURFACE_SIDE_STYLE('',(#546114)); +#546114 = SURFACE_STYLE_FILL_AREA(#546115); +#546115 = FILL_AREA_STYLE('',(#546116)); +#546116 = FILL_AREA_STYLE_COLOUR('',#512538); +#546117 = CURVE_STYLE('',#546118,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546118 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546119 = STYLED_ITEM('color',(#546120),#158335); +#546120 = PRESENTATION_STYLE_ASSIGNMENT((#546121,#546126)); +#546121 = SURFACE_STYLE_USAGE(.BOTH.,#546122); +#546122 = SURFACE_SIDE_STYLE('',(#546123)); +#546123 = SURFACE_STYLE_FILL_AREA(#546124); +#546124 = FILL_AREA_STYLE('',(#546125)); +#546125 = FILL_AREA_STYLE_COLOUR('',#512538); +#546126 = CURVE_STYLE('',#546127,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546127 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546128 = STYLED_ITEM('color',(#546129),#158352); +#546129 = PRESENTATION_STYLE_ASSIGNMENT((#546130,#546135)); +#546130 = SURFACE_STYLE_USAGE(.BOTH.,#546131); +#546131 = SURFACE_SIDE_STYLE('',(#546132)); +#546132 = SURFACE_STYLE_FILL_AREA(#546133); +#546133 = FILL_AREA_STYLE('',(#546134)); +#546134 = FILL_AREA_STYLE_COLOUR('',#512538); +#546135 = CURVE_STYLE('',#546136,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546136 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546137 = STYLED_ITEM('color',(#546138),#158369); +#546138 = PRESENTATION_STYLE_ASSIGNMENT((#546139,#546144)); +#546139 = SURFACE_STYLE_USAGE(.BOTH.,#546140); +#546140 = SURFACE_SIDE_STYLE('',(#546141)); +#546141 = SURFACE_STYLE_FILL_AREA(#546142); +#546142 = FILL_AREA_STYLE('',(#546143)); +#546143 = FILL_AREA_STYLE_COLOUR('',#512538); +#546144 = CURVE_STYLE('',#546145,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546145 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546146 = STYLED_ITEM('color',(#546147),#158386); +#546147 = PRESENTATION_STYLE_ASSIGNMENT((#546148,#546153)); +#546148 = SURFACE_STYLE_USAGE(.BOTH.,#546149); +#546149 = SURFACE_SIDE_STYLE('',(#546150)); +#546150 = SURFACE_STYLE_FILL_AREA(#546151); +#546151 = FILL_AREA_STYLE('',(#546152)); +#546152 = FILL_AREA_STYLE_COLOUR('',#512538); +#546153 = CURVE_STYLE('',#546154,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546154 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546155 = STYLED_ITEM('color',(#546156),#158403); +#546156 = PRESENTATION_STYLE_ASSIGNMENT((#546157,#546162)); +#546157 = SURFACE_STYLE_USAGE(.BOTH.,#546158); +#546158 = SURFACE_SIDE_STYLE('',(#546159)); +#546159 = SURFACE_STYLE_FILL_AREA(#546160); +#546160 = FILL_AREA_STYLE('',(#546161)); +#546161 = FILL_AREA_STYLE_COLOUR('',#512538); +#546162 = CURVE_STYLE('',#546163,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546163 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546164 = STYLED_ITEM('color',(#546165),#158415); +#546165 = PRESENTATION_STYLE_ASSIGNMENT((#546166,#546171)); +#546166 = SURFACE_STYLE_USAGE(.BOTH.,#546167); +#546167 = SURFACE_SIDE_STYLE('',(#546168)); +#546168 = SURFACE_STYLE_FILL_AREA(#546169); +#546169 = FILL_AREA_STYLE('',(#546170)); +#546170 = FILL_AREA_STYLE_COLOUR('',#512538); +#546171 = CURVE_STYLE('',#546172,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546172 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546173 = STYLED_ITEM('color',(#546174),#158432); +#546174 = PRESENTATION_STYLE_ASSIGNMENT((#546175,#546180)); +#546175 = SURFACE_STYLE_USAGE(.BOTH.,#546176); +#546176 = SURFACE_SIDE_STYLE('',(#546177)); +#546177 = SURFACE_STYLE_FILL_AREA(#546178); +#546178 = FILL_AREA_STYLE('',(#546179)); +#546179 = FILL_AREA_STYLE_COLOUR('',#512538); +#546180 = CURVE_STYLE('',#546181,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546181 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546182 = STYLED_ITEM('color',(#546183),#158449); +#546183 = PRESENTATION_STYLE_ASSIGNMENT((#546184,#546189)); +#546184 = SURFACE_STYLE_USAGE(.BOTH.,#546185); +#546185 = SURFACE_SIDE_STYLE('',(#546186)); +#546186 = SURFACE_STYLE_FILL_AREA(#546187); +#546187 = FILL_AREA_STYLE('',(#546188)); +#546188 = FILL_AREA_STYLE_COLOUR('',#512538); +#546189 = CURVE_STYLE('',#546190,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546190 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546191 = STYLED_ITEM('color',(#546192),#158466); +#546192 = PRESENTATION_STYLE_ASSIGNMENT((#546193,#546198)); +#546193 = SURFACE_STYLE_USAGE(.BOTH.,#546194); +#546194 = SURFACE_SIDE_STYLE('',(#546195)); +#546195 = SURFACE_STYLE_FILL_AREA(#546196); +#546196 = FILL_AREA_STYLE('',(#546197)); +#546197 = FILL_AREA_STYLE_COLOUR('',#512538); +#546198 = CURVE_STYLE('',#546199,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546199 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546200 = STYLED_ITEM('color',(#546201),#158483); +#546201 = PRESENTATION_STYLE_ASSIGNMENT((#546202,#546207)); +#546202 = SURFACE_STYLE_USAGE(.BOTH.,#546203); +#546203 = SURFACE_SIDE_STYLE('',(#546204)); +#546204 = SURFACE_STYLE_FILL_AREA(#546205); +#546205 = FILL_AREA_STYLE('',(#546206)); +#546206 = FILL_AREA_STYLE_COLOUR('',#512538); +#546207 = CURVE_STYLE('',#546208,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546208 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546209 = STYLED_ITEM('color',(#546210),#158500); +#546210 = PRESENTATION_STYLE_ASSIGNMENT((#546211,#546216)); +#546211 = SURFACE_STYLE_USAGE(.BOTH.,#546212); +#546212 = SURFACE_SIDE_STYLE('',(#546213)); +#546213 = SURFACE_STYLE_FILL_AREA(#546214); +#546214 = FILL_AREA_STYLE('',(#546215)); +#546215 = FILL_AREA_STYLE_COLOUR('',#512538); +#546216 = CURVE_STYLE('',#546217,POSITIVE_LENGTH_MEASURE(0.1),#512538); +#546217 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546218 = STYLED_ITEM('color',(#546219),#158512); +#546219 = PRESENTATION_STYLE_ASSIGNMENT((#546220,#546225)); +#546220 = SURFACE_STYLE_USAGE(.BOTH.,#546221); +#546221 = SURFACE_SIDE_STYLE('',(#546222)); +#546222 = SURFACE_STYLE_FILL_AREA(#546223); +#546223 = FILL_AREA_STYLE('',(#546224)); +#546224 = FILL_AREA_STYLE_COLOUR('',#512989); +#546225 = CURVE_STYLE('',#546226,POSITIVE_LENGTH_MEASURE(0.1),#512989); +#546226 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous'); +#546227 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #546228,#546235,#546243,#546250,#546257,#546264,#546271,#546278, + #546285,#546292,#546299,#546306,#546313,#546320,#546327,#546334, + #546341,#546348,#546355,#546362,#546369,#546376,#546383,#546390, + #546397,#546404,#546411,#546418,#546425,#546432,#546439,#546446, + #546453,#546460,#546467,#546474,#546481,#546488,#546495,#546502, + #546509,#546516,#546523,#546530,#546537,#546544,#546551,#546558, + #546565,#546572,#546579,#546586,#546593,#546600,#546607,#546614, + #546621,#546628,#546635,#546642,#546649,#546656,#546663,#546670, + #546677,#546684,#546691,#546698,#546705,#546712,#546719,#546726, + #546733,#546740,#546747,#546754,#546761,#546768,#546775,#546782, + #546789,#546796,#546803,#546810,#546817,#546824,#546831,#546838, + #546845,#546852,#546859,#546866,#546873,#546880,#546887,#546894, + #546901,#546908,#546915,#546922,#546929,#546936,#546943,#546950, + #546957,#546964,#546971,#546978,#546985,#546992,#546999,#547006, + #547013,#547020,#547027,#547034,#547041,#547048,#547055,#547062, + #547069,#547076,#547083,#547090,#547097,#547104,#547111,#547118, + #547125,#547132,#547139,#547146,#547153,#547160,#547167,#547174, + #547181,#547188,#547195,#547202,#547209,#547216,#547223,#547230, + #547237,#547244,#547251,#547258,#547265,#547272,#547279,#547286, + #547293,#547300,#547307,#547314,#547321,#547328,#547335,#547342, + #547349,#547356,#547363,#547370,#547377,#547384,#547391,#547398, + #547405,#547412,#547419,#547426,#547433,#547440,#547447,#547454, + #547461,#547468,#547475,#547482,#547489,#547496,#547503,#547510, + #547517,#547524,#547531,#547538,#547545,#547552,#547559,#547566, + #547573,#547580,#547587,#547594,#547601,#547608,#547615,#547622, + #547629,#547636,#547643,#547650,#547657,#547664,#547671,#547678, + #547685,#547692,#547699,#547706,#547713,#547720,#547727,#547734, + #547741,#547748,#547755,#547762,#547769,#547776,#547783,#547790, + #547797,#547804,#547811,#547818,#547825,#547832,#547839,#547846, + #547853,#547860,#547867,#547874,#547881,#547888,#547895,#547902, + #547909,#547916,#547923,#547930,#547937,#547944,#547951,#547958, + #547965,#547972,#547979,#547986,#547993,#548000,#548007,#548014, + #548021,#548028,#548035,#548042,#548049,#548056,#548063,#548070, + #548077,#548084,#548091,#548098,#548105,#548112,#548119,#548126, + #548133,#548140,#548147,#548154,#548161,#548168,#548175,#548182, + #548189,#548196,#548203,#548210,#548217,#548224,#548231,#548238, + #548245,#548252,#548259,#548266,#548273,#548280,#548287,#548294, + #548301,#548308,#548315,#548322,#548329,#548336,#548343,#548350, + #548357,#548364,#548371,#548378,#548385,#548392,#548399,#548406, + #548413,#548420,#548427,#548434,#548441,#548448,#548455,#548462, + #548469,#548476,#548483,#548490,#548497,#548504,#548511,#548518, + #548525,#548532,#548539,#548546,#548553,#548560,#548567,#548574, + #548581,#548588,#548595,#548602,#548609,#548616,#548623,#548630, + #548637,#548644,#548651,#548658,#548665,#548672,#548679,#548686, + #548693,#548700,#548707,#548714,#548721,#548728,#548735,#548742, + #548749,#548756,#548763,#548770,#548777,#548784,#548791,#548798, + #548805,#548812,#548819,#548826,#548833,#548840,#548847,#548854, + #548861,#548868,#548875,#548882,#548889,#548896,#548903,#548910, + #548917,#548924,#548931,#548938,#548945,#548952,#548959,#548966, + #548973,#548980,#548987,#548994,#549001,#549008,#549015,#549022, + #549029,#549036,#549043,#549050,#549057,#549064,#549071,#549078, + #549085,#549092,#549099,#549106,#549113,#549120,#549127,#549134, + #549141,#549148,#549155,#549162,#549169,#549176,#549183,#549190, + #549197,#549204,#549211,#549218,#549225,#549232,#549239,#549246, + #549253,#549260,#549267,#549274,#549281,#549288,#549295,#549302, + #549309,#549316,#549323,#549330,#549337,#549344,#549351,#549358, + #549365,#549372,#549379,#549386,#549393,#549400,#549407,#549414, + #549421,#549428,#549435,#549442,#549449,#549456,#549463,#549470, + #549477,#549484,#549491,#549498,#549505,#549512,#549519,#549526, + #549533,#549540,#549547,#549554,#549561,#549568,#549575,#549582, + #549589,#549596,#549603,#549610,#549617,#549624,#549631,#549638, + #549645,#549652,#549659,#549666,#549673,#549680,#549687,#549694, + #549701,#549708,#549715,#549722,#549729,#549736,#549743,#549750, + #549757,#549764,#549771,#549778,#549785,#549792,#549800,#549807, + #549814,#549821,#549828,#549835,#549842,#549849,#549856,#549863, + #549870,#549877,#549884,#549891,#549898,#549905,#549913,#549920, + #549927,#549934,#549941,#549948,#549955,#549962,#549969,#549976, + #549983,#549990,#549997,#550004,#550011,#550018,#550025,#550032, + #550039,#550046,#550053,#550060,#550067,#550074,#550081,#550088, + #550095,#550102,#550109,#550116,#550123,#550130,#550137,#550144, + #550151,#550158,#550165,#550172,#550179,#550186,#550193,#550200, + #550207,#550214,#550221,#550228,#550235,#550242,#550249,#550256, + #550263,#550270,#550277,#550284,#550291,#550298,#550305,#550312, + #550319,#550326,#550333,#550340,#550347,#550354,#550361,#550368, + #550375,#550382,#550389,#550396,#550403,#550410,#550417,#550424, + #550431,#550438,#550445,#550452,#550459,#550466,#550473,#550480, + #550487,#550494,#550501,#550508,#550515,#550522,#550529,#550536, + #550543,#550550,#550557,#550564,#550571,#550578,#550585,#550592, + #550599,#550606,#550613,#550620,#550627,#550634,#550641,#550648, + #550655,#550662,#550669,#550676,#550683,#550690,#550697,#550704, + #550711,#550718,#550725,#550732,#550739,#550746,#550753,#550760, + #550767,#550774,#550781,#550788,#550795,#550802,#550809,#550816, + #550823,#550830,#550837,#550844,#550851,#550858,#550865,#550872, + #550879,#550886,#550893,#550900,#550907,#550914,#550921,#550928, + #550935,#550942,#550949,#550956,#550963,#550970,#550977,#550984, + #550991,#550998,#551005,#551012,#551019,#551026,#551033,#551040, + #551047,#551054,#551061,#551068,#551075,#551082,#551089,#551096, + #551104,#551111,#551118,#551125,#551132,#551139,#551146,#551153, + #551160,#551167,#551174,#551181,#551188,#551195,#551202,#551209, + #551216,#551223,#551230,#551237,#551244,#551251,#551258,#551265, + #551272,#551279,#551286,#551293,#551300,#551307,#551314,#551321, + #551328,#551335,#551342,#551349,#551356,#551363,#551370,#551377, + #551384,#551391,#551398,#551405,#551412,#551419,#551426,#551433, + #551440,#551447,#551454,#551461,#551468,#551475,#551482,#551489, + #551496,#551503,#551510,#551517,#551524,#551531,#551538,#551545, + #551552,#551559,#551566,#551573,#551580,#551587,#551594,#551601, + #551608,#551615,#551622,#551629,#551636,#551643,#551650,#551657, + #551664,#551671,#551678,#551685,#551692,#551699,#551706,#551713, + #551720,#551727,#551734,#551741,#551748,#551755,#551762,#551769, + #551776,#551783,#551790,#551797,#551804,#551811,#551818,#551825, + #551832,#551839,#551846,#551853,#551860,#551867,#551874,#551881, + #551888,#551895,#551902,#551909,#551916,#551923,#551930,#551937, + #551944,#551951,#551958,#551965,#551972,#551979,#551986,#551993, + #552000,#552007,#552014,#552021,#552028,#552035,#552042,#552049, + #552056,#552063,#552070,#552077,#552084,#552091,#552098,#552105, + #552112,#552119,#552126,#552133,#552140,#552147,#552154,#552161, + #552168,#552175,#552182,#552189,#552196,#552203,#552210,#552217, + #552224,#552231,#552238,#552245,#552252,#552259,#552266,#552273, + #552280,#552287,#552294,#552301,#552308,#552315,#552322,#552329, + #552336,#552343,#552350,#552357,#552364,#552371,#552378,#552385, + #552392,#552399,#552406,#552413,#552420,#552427,#552434,#552441, + #552448,#552455,#552462,#552469,#552476,#552483,#552490,#552497, + #552504,#552511,#552518,#552525,#552532,#552539,#552546,#552553, + #552560,#552567,#552574,#552581,#552588,#552595,#552602,#552609, + #552616,#552623,#552630,#552637,#552644,#552651,#552658,#552665, + #552672,#552679,#552686,#552693,#552700,#552707,#552714,#552721, + #552728,#552735,#552742,#552749,#552756,#552763,#552770,#552777, + #552784,#552791,#552798,#552805,#552812,#552819,#552826,#552833, + #552840,#552847,#552854,#552861,#552868,#552875,#552882,#552889, + #552896,#552903,#552910,#552917,#552924,#552931,#552938,#552945, + #552952,#552959,#552966,#552973,#552980,#552987,#552994,#553001, + #553008,#553015,#553023,#553030,#553037,#553044,#553051,#553058, + #553065,#553072,#553079,#553086,#553093,#553100,#553107,#553114, + #553121,#553128,#553135,#553142,#553149,#553156,#553163,#553170, + #553177,#553184,#553191,#553198,#553205,#553212,#553219,#553226, + #553233,#553240,#553247,#553254,#553261,#553268,#553275,#553282, + #553289,#553296,#553303,#553310,#553317,#553324,#553331,#553338, + #553345,#553352,#553359,#553366,#553373,#553380,#553387,#553394, + #553401,#553408,#553415,#553422,#553429,#553436,#553443,#553450, + #553457,#553464,#553471,#553478,#553485,#553492,#553499,#553506, + #553513,#553520,#553527,#553534,#553541,#553548,#553555,#553562, + #553569,#553576,#553583,#553590,#553597,#553604,#553611,#553618, + #553625,#553632,#553639,#553646,#553653,#553660,#553667,#553674, + #553681,#553688,#553695,#553702,#553709,#553716,#553723,#553730, + #553737,#553744,#553751,#553758,#553765,#553772,#553779,#553786, + #553793,#553800,#553807,#553814,#553821,#553828,#553835,#553842, + #553849,#553856,#553863,#553870,#553877,#553884,#553891,#553898, + #553905,#553912,#553919,#553926,#553933,#553940,#553947,#553954, + #553961,#553968,#553975,#553982,#553989,#553996,#554003,#554010, + #554017,#554024,#554031,#554038,#554045,#554052,#554059,#554066, + #554073,#554080,#554087,#554094,#554101,#554108,#554115,#554122, + #554129,#554136,#554143,#554150,#554157,#554164,#554171,#554178, + #554185,#554192,#554199,#554206,#554213,#554220,#554227,#554234, + #554241,#554248,#554255,#554262,#554269,#554276,#554283,#554290, + #554297,#554304,#554311,#554318,#554325,#554332,#554339,#554346, + #554353,#554360,#554367,#554374,#554381,#554388,#554395,#554402, + #554409,#554416,#554423,#554430,#554437,#554444,#554451,#554458, + #554465,#554472,#554479,#554486,#554493,#554500,#554507,#554514, + #554521,#554528,#554535,#554542,#554549,#554556,#554563,#554570, + #554577,#554584,#554591,#554598,#554605,#554612,#554619,#554626, + #554633,#554640,#554647,#554654,#554661,#554668,#554675,#554682, + #554689,#554696,#554703,#554710,#554717,#554724,#554731,#554738, + #554745,#554752,#554759,#554766,#554773,#554780,#554787,#554794, + #554801,#554808,#554815,#554822,#554829,#554836,#554843,#554850, + #554857,#554864,#554871,#554878,#554885,#554892,#554899,#554906, + #554913,#554920,#554927,#554934,#554941,#554948,#554955,#554962, + #554969,#554976,#554983,#554990,#554997,#555004,#555011,#555018, + #555025,#555032,#555039,#555046,#555053,#555060,#555067,#555074, + #555081,#555088,#555095,#555102,#555109,#555116,#555123,#555130, + #555137,#555144,#555151,#555158,#555165,#555172,#555179,#555186, + #555193,#555200,#555207,#555214,#555221,#555228,#555235,#555242, + #555249,#555256,#555263,#555270,#555277,#555284,#555291,#555298, + #555305,#555312,#555319,#555326,#555333,#555340,#555347,#555354, + #555361,#555368,#555375,#555382,#555389,#555396,#555403,#555410, + #555417,#555424,#555431,#555438,#555445,#555452,#555459,#555466, + #555473,#555480,#555487,#555494,#555501,#555508,#555515,#555522, + #555529,#555536,#555543,#555550,#555557,#555564,#555571,#555578, + #555585,#555592,#555599,#555606,#555613,#555620,#555627,#555634, + #555641,#555648,#555655,#555662,#555669,#555676,#555683,#555690, + #555697,#555704,#555711,#555718,#555725,#555732,#555739,#555746, + #555753,#555760,#555767,#555774,#555781,#555788,#555795,#555802, + #555809,#555816,#555823,#555830,#555837,#555844,#555851,#555858, + #555865,#555872,#555879,#555886,#555893,#555900,#555907,#555914, + #555921,#555928,#555935,#555942,#555949,#555956,#555963,#555970, + #555977,#555984,#555991,#555998,#556005,#556012,#556019,#556026, + #556033,#556040,#556047,#556054,#556061,#556068,#556075,#556082, + #556089,#556096,#556103,#556110,#556117,#556124,#556131,#556138, + #556145,#556152,#556159,#556166,#556173,#556180,#556187,#556194, + #556201,#556208,#556215,#556222,#556229,#556236,#556243,#556250, + #556257,#556264,#556271,#556278,#556285,#556292,#556299,#556306, + #556313,#556320,#556327,#556334,#556341,#556348,#556355,#556362, + #556369,#556376,#556383,#556390,#556397,#556404,#556411,#556418, + #556425,#556432,#556439,#556446,#556453,#556460,#556467,#556474, + #556481,#556488,#556495,#556502,#556509,#556516,#556523,#556530, + #556537,#556544,#556551,#556558,#556565,#556572,#556579,#556586, + #556593,#556600,#556607,#556614,#556621,#556628,#556635,#556642, + #556649,#556656,#556663,#556670,#556677,#556684,#556691,#556698, + #556705,#556712,#556719,#556726,#556733,#556740,#556747,#556754, + #556761,#556768,#556775,#556782,#556789,#556796,#556803,#556810, + #556817,#556824,#556831,#556838,#556845,#556852,#556859,#556866, + #556873,#556880,#556887,#556894,#556901,#556908,#556915,#556922, + #556929,#556936,#556943,#556950,#556957,#556964,#556971,#556978, + #556985,#556992,#556999,#557006,#557013,#557020,#557027,#557034, + #557041,#557048,#557055,#557062,#557069,#557076,#557083,#557090, + #557097,#557104,#557111,#557118,#557125,#557132,#557139,#557146, + #557153,#557160,#557167,#557174,#557181,#557188,#557195,#557202, + #557209,#557216),#155506); +#546228 = STYLED_ITEM('color',(#546229),#104788); +#546229 = PRESENTATION_STYLE_ASSIGNMENT((#546230)); +#546230 = SURFACE_STYLE_USAGE(.BOTH.,#546231); +#546231 = SURFACE_SIDE_STYLE('',(#546232)); +#546232 = SURFACE_STYLE_FILL_AREA(#546233); +#546233 = FILL_AREA_STYLE('',(#546234)); +#546234 = FILL_AREA_STYLE_COLOUR('',#521053); +#546235 = OVER_RIDING_STYLED_ITEM('overriding color',(#546236),#104790, + #546228); +#546236 = PRESENTATION_STYLE_ASSIGNMENT((#546237)); +#546237 = SURFACE_STYLE_USAGE(.BOTH.,#546238); +#546238 = SURFACE_SIDE_STYLE('',(#546239)); +#546239 = SURFACE_STYLE_FILL_AREA(#546240); +#546240 = FILL_AREA_STYLE('',(#546241)); +#546241 = FILL_AREA_STYLE_COLOUR('',#546242); +#546242 = COLOUR_RGB('',0.811764696686,0.811764696686,0.811764696686); +#546243 = OVER_RIDING_STYLED_ITEM('overriding color',(#546244),#105430, + #546228); +#546244 = PRESENTATION_STYLE_ASSIGNMENT((#546245)); +#546245 = SURFACE_STYLE_USAGE(.BOTH.,#546246); +#546246 = SURFACE_SIDE_STYLE('',(#546247)); +#546247 = SURFACE_STYLE_FILL_AREA(#546248); +#546248 = FILL_AREA_STYLE('',(#546249)); +#546249 = FILL_AREA_STYLE_COLOUR('',#546242); +#546250 = OVER_RIDING_STYLED_ITEM('overriding color',(#546251),#105462, + #546228); +#546251 = PRESENTATION_STYLE_ASSIGNMENT((#546252)); +#546252 = SURFACE_STYLE_USAGE(.BOTH.,#546253); +#546253 = SURFACE_SIDE_STYLE('',(#546254)); +#546254 = SURFACE_STYLE_FILL_AREA(#546255); +#546255 = FILL_AREA_STYLE('',(#546256)); +#546256 = FILL_AREA_STYLE_COLOUR('',#546242); +#546257 = OVER_RIDING_STYLED_ITEM('overriding color',(#546258),#105480, + #546228); +#546258 = PRESENTATION_STYLE_ASSIGNMENT((#546259)); +#546259 = SURFACE_STYLE_USAGE(.BOTH.,#546260); +#546260 = SURFACE_SIDE_STYLE('',(#546261)); +#546261 = SURFACE_STYLE_FILL_AREA(#546262); +#546262 = FILL_AREA_STYLE('',(#546263)); +#546263 = FILL_AREA_STYLE_COLOUR('',#546242); +#546264 = OVER_RIDING_STYLED_ITEM('overriding color',(#546265),#106040, + #546228); +#546265 = PRESENTATION_STYLE_ASSIGNMENT((#546266)); +#546266 = SURFACE_STYLE_USAGE(.BOTH.,#546267); +#546267 = SURFACE_SIDE_STYLE('',(#546268)); +#546268 = SURFACE_STYLE_FILL_AREA(#546269); +#546269 = FILL_AREA_STYLE('',(#546270)); +#546270 = FILL_AREA_STYLE_COLOUR('',#546242); +#546271 = OVER_RIDING_STYLED_ITEM('overriding color',(#546272),#106062, + #546228); +#546272 = PRESENTATION_STYLE_ASSIGNMENT((#546273)); +#546273 = SURFACE_STYLE_USAGE(.BOTH.,#546274); +#546274 = SURFACE_SIDE_STYLE('',(#546275)); +#546275 = SURFACE_STYLE_FILL_AREA(#546276); +#546276 = FILL_AREA_STYLE('',(#546277)); +#546277 = FILL_AREA_STYLE_COLOUR('',#546242); +#546278 = OVER_RIDING_STYLED_ITEM('overriding color',(#546279),#106074, + #546228); +#546279 = PRESENTATION_STYLE_ASSIGNMENT((#546280)); +#546280 = SURFACE_STYLE_USAGE(.BOTH.,#546281); +#546281 = SURFACE_SIDE_STYLE('',(#546282)); +#546282 = SURFACE_STYLE_FILL_AREA(#546283); +#546283 = FILL_AREA_STYLE('',(#546284)); +#546284 = FILL_AREA_STYLE_COLOUR('',#546242); +#546285 = OVER_RIDING_STYLED_ITEM('overriding color',(#546286),#106096, + #546228); +#546286 = PRESENTATION_STYLE_ASSIGNMENT((#546287)); +#546287 = SURFACE_STYLE_USAGE(.BOTH.,#546288); +#546288 = SURFACE_SIDE_STYLE('',(#546289)); +#546289 = SURFACE_STYLE_FILL_AREA(#546290); +#546290 = FILL_AREA_STYLE('',(#546291)); +#546291 = FILL_AREA_STYLE_COLOUR('',#546242); +#546292 = OVER_RIDING_STYLED_ITEM('overriding color',(#546293),#106108, + #546228); +#546293 = PRESENTATION_STYLE_ASSIGNMENT((#546294)); +#546294 = SURFACE_STYLE_USAGE(.BOTH.,#546295); +#546295 = SURFACE_SIDE_STYLE('',(#546296)); +#546296 = SURFACE_STYLE_FILL_AREA(#546297); +#546297 = FILL_AREA_STYLE('',(#546298)); +#546298 = FILL_AREA_STYLE_COLOUR('',#546242); +#546299 = OVER_RIDING_STYLED_ITEM('overriding color',(#546300),#106130, + #546228); +#546300 = PRESENTATION_STYLE_ASSIGNMENT((#546301)); +#546301 = SURFACE_STYLE_USAGE(.BOTH.,#546302); +#546302 = SURFACE_SIDE_STYLE('',(#546303)); +#546303 = SURFACE_STYLE_FILL_AREA(#546304); +#546304 = FILL_AREA_STYLE('',(#546305)); +#546305 = FILL_AREA_STYLE_COLOUR('',#546242); +#546306 = OVER_RIDING_STYLED_ITEM('overriding color',(#546307),#106142, + #546228); +#546307 = PRESENTATION_STYLE_ASSIGNMENT((#546308)); +#546308 = SURFACE_STYLE_USAGE(.BOTH.,#546309); +#546309 = SURFACE_SIDE_STYLE('',(#546310)); +#546310 = SURFACE_STYLE_FILL_AREA(#546311); +#546311 = FILL_AREA_STYLE('',(#546312)); +#546312 = FILL_AREA_STYLE_COLOUR('',#546242); +#546313 = OVER_RIDING_STYLED_ITEM('overriding color',(#546314),#106164, + #546228); +#546314 = PRESENTATION_STYLE_ASSIGNMENT((#546315)); +#546315 = SURFACE_STYLE_USAGE(.BOTH.,#546316); +#546316 = SURFACE_SIDE_STYLE('',(#546317)); +#546317 = SURFACE_STYLE_FILL_AREA(#546318); +#546318 = FILL_AREA_STYLE('',(#546319)); +#546319 = FILL_AREA_STYLE_COLOUR('',#546242); +#546320 = OVER_RIDING_STYLED_ITEM('overriding color',(#546321),#106176, + #546228); +#546321 = PRESENTATION_STYLE_ASSIGNMENT((#546322)); +#546322 = SURFACE_STYLE_USAGE(.BOTH.,#546323); +#546323 = SURFACE_SIDE_STYLE('',(#546324)); +#546324 = SURFACE_STYLE_FILL_AREA(#546325); +#546325 = FILL_AREA_STYLE('',(#546326)); +#546326 = FILL_AREA_STYLE_COLOUR('',#546242); +#546327 = OVER_RIDING_STYLED_ITEM('overriding color',(#546328),#106215, + #546228); +#546328 = PRESENTATION_STYLE_ASSIGNMENT((#546329)); +#546329 = SURFACE_STYLE_USAGE(.BOTH.,#546330); +#546330 = SURFACE_SIDE_STYLE('',(#546331)); +#546331 = SURFACE_STYLE_FILL_AREA(#546332); +#546332 = FILL_AREA_STYLE('',(#546333)); +#546333 = FILL_AREA_STYLE_COLOUR('',#546242); +#546334 = OVER_RIDING_STYLED_ITEM('overriding color',(#546335),#106232, + #546228); +#546335 = PRESENTATION_STYLE_ASSIGNMENT((#546336)); +#546336 = SURFACE_STYLE_USAGE(.BOTH.,#546337); +#546337 = SURFACE_SIDE_STYLE('',(#546338)); +#546338 = SURFACE_STYLE_FILL_AREA(#546339); +#546339 = FILL_AREA_STYLE('',(#546340)); +#546340 = FILL_AREA_STYLE_COLOUR('',#546242); +#546341 = OVER_RIDING_STYLED_ITEM('overriding color',(#546342),#106249, + #546228); +#546342 = PRESENTATION_STYLE_ASSIGNMENT((#546343)); +#546343 = SURFACE_STYLE_USAGE(.BOTH.,#546344); +#546344 = SURFACE_SIDE_STYLE('',(#546345)); +#546345 = SURFACE_STYLE_FILL_AREA(#546346); +#546346 = FILL_AREA_STYLE('',(#546347)); +#546347 = FILL_AREA_STYLE_COLOUR('',#546242); +#546348 = OVER_RIDING_STYLED_ITEM('overriding color',(#546349),#106266, + #546228); +#546349 = PRESENTATION_STYLE_ASSIGNMENT((#546350)); +#546350 = SURFACE_STYLE_USAGE(.BOTH.,#546351); +#546351 = SURFACE_SIDE_STYLE('',(#546352)); +#546352 = SURFACE_STYLE_FILL_AREA(#546353); +#546353 = FILL_AREA_STYLE('',(#546354)); +#546354 = FILL_AREA_STYLE_COLOUR('',#546242); +#546355 = OVER_RIDING_STYLED_ITEM('overriding color',(#546356),#106300, + #546228); +#546356 = PRESENTATION_STYLE_ASSIGNMENT((#546357)); +#546357 = SURFACE_STYLE_USAGE(.BOTH.,#546358); +#546358 = SURFACE_SIDE_STYLE('',(#546359)); +#546359 = SURFACE_STYLE_FILL_AREA(#546360); +#546360 = FILL_AREA_STYLE('',(#546361)); +#546361 = FILL_AREA_STYLE_COLOUR('',#546242); +#546362 = OVER_RIDING_STYLED_ITEM('overriding color',(#546363),#106630, + #546228); +#546363 = PRESENTATION_STYLE_ASSIGNMENT((#546364)); +#546364 = SURFACE_STYLE_USAGE(.BOTH.,#546365); +#546365 = SURFACE_SIDE_STYLE('',(#546366)); +#546366 = SURFACE_STYLE_FILL_AREA(#546367); +#546367 = FILL_AREA_STYLE('',(#546368)); +#546368 = FILL_AREA_STYLE_COLOUR('',#546242); +#546369 = OVER_RIDING_STYLED_ITEM('overriding color',(#546370),#106661, + #546228); +#546370 = PRESENTATION_STYLE_ASSIGNMENT((#546371)); +#546371 = SURFACE_STYLE_USAGE(.BOTH.,#546372); +#546372 = SURFACE_SIDE_STYLE('',(#546373)); +#546373 = SURFACE_STYLE_FILL_AREA(#546374); +#546374 = FILL_AREA_STYLE('',(#546375)); +#546375 = FILL_AREA_STYLE_COLOUR('',#546242); +#546376 = OVER_RIDING_STYLED_ITEM('overriding color',(#546377),#106813, + #546228); +#546377 = PRESENTATION_STYLE_ASSIGNMENT((#546378)); +#546378 = SURFACE_STYLE_USAGE(.BOTH.,#546379); +#546379 = SURFACE_SIDE_STYLE('',(#546380)); +#546380 = SURFACE_STYLE_FILL_AREA(#546381); +#546381 = FILL_AREA_STYLE('',(#546382)); +#546382 = FILL_AREA_STYLE_COLOUR('',#546242); +#546383 = OVER_RIDING_STYLED_ITEM('overriding color',(#546384),#106909, + #546228); +#546384 = PRESENTATION_STYLE_ASSIGNMENT((#546385)); +#546385 = SURFACE_STYLE_USAGE(.BOTH.,#546386); +#546386 = SURFACE_SIDE_STYLE('',(#546387)); +#546387 = SURFACE_STYLE_FILL_AREA(#546388); +#546388 = FILL_AREA_STYLE('',(#546389)); +#546389 = FILL_AREA_STYLE_COLOUR('',#546242); +#546390 = OVER_RIDING_STYLED_ITEM('overriding color',(#546391),#107013, + #546228); +#546391 = PRESENTATION_STYLE_ASSIGNMENT((#546392)); +#546392 = SURFACE_STYLE_USAGE(.BOTH.,#546393); +#546393 = SURFACE_SIDE_STYLE('',(#546394)); +#546394 = SURFACE_STYLE_FILL_AREA(#546395); +#546395 = FILL_AREA_STYLE('',(#546396)); +#546396 = FILL_AREA_STYLE_COLOUR('',#546242); +#546397 = OVER_RIDING_STYLED_ITEM('overriding color',(#546398),#108857, + #546228); +#546398 = PRESENTATION_STYLE_ASSIGNMENT((#546399)); +#546399 = SURFACE_STYLE_USAGE(.BOTH.,#546400); +#546400 = SURFACE_SIDE_STYLE('',(#546401)); +#546401 = SURFACE_STYLE_FILL_AREA(#546402); +#546402 = FILL_AREA_STYLE('',(#546403)); +#546403 = FILL_AREA_STYLE_COLOUR('',#546242); +#546404 = OVER_RIDING_STYLED_ITEM('overriding color',(#546405),#108893, + #546228); +#546405 = PRESENTATION_STYLE_ASSIGNMENT((#546406)); +#546406 = SURFACE_STYLE_USAGE(.BOTH.,#546407); +#546407 = SURFACE_SIDE_STYLE('',(#546408)); +#546408 = SURFACE_STYLE_FILL_AREA(#546409); +#546409 = FILL_AREA_STYLE('',(#546410)); +#546410 = FILL_AREA_STYLE_COLOUR('',#546242); +#546411 = OVER_RIDING_STYLED_ITEM('overriding color',(#546412),#108917, + #546228); +#546412 = PRESENTATION_STYLE_ASSIGNMENT((#546413)); +#546413 = SURFACE_STYLE_USAGE(.BOTH.,#546414); +#546414 = SURFACE_SIDE_STYLE('',(#546415)); +#546415 = SURFACE_STYLE_FILL_AREA(#546416); +#546416 = FILL_AREA_STYLE('',(#546417)); +#546417 = FILL_AREA_STYLE_COLOUR('',#546242); +#546418 = OVER_RIDING_STYLED_ITEM('overriding color',(#546419),#108946, + #546228); +#546419 = PRESENTATION_STYLE_ASSIGNMENT((#546420)); +#546420 = SURFACE_STYLE_USAGE(.BOTH.,#546421); +#546421 = SURFACE_SIDE_STYLE('',(#546422)); +#546422 = SURFACE_STYLE_FILL_AREA(#546423); +#546423 = FILL_AREA_STYLE('',(#546424)); +#546424 = FILL_AREA_STYLE_COLOUR('',#546242); +#546425 = OVER_RIDING_STYLED_ITEM('overriding color',(#546426),#108975, + #546228); +#546426 = PRESENTATION_STYLE_ASSIGNMENT((#546427)); +#546427 = SURFACE_STYLE_USAGE(.BOTH.,#546428); +#546428 = SURFACE_SIDE_STYLE('',(#546429)); +#546429 = SURFACE_STYLE_FILL_AREA(#546430); +#546430 = FILL_AREA_STYLE('',(#546431)); +#546431 = FILL_AREA_STYLE_COLOUR('',#546242); +#546432 = OVER_RIDING_STYLED_ITEM('overriding color',(#546433),#109004, + #546228); +#546433 = PRESENTATION_STYLE_ASSIGNMENT((#546434)); +#546434 = SURFACE_STYLE_USAGE(.BOTH.,#546435); +#546435 = SURFACE_SIDE_STYLE('',(#546436)); +#546436 = SURFACE_STYLE_FILL_AREA(#546437); +#546437 = FILL_AREA_STYLE('',(#546438)); +#546438 = FILL_AREA_STYLE_COLOUR('',#546242); +#546439 = OVER_RIDING_STYLED_ITEM('overriding color',(#546440),#109033, + #546228); +#546440 = PRESENTATION_STYLE_ASSIGNMENT((#546441)); +#546441 = SURFACE_STYLE_USAGE(.BOTH.,#546442); +#546442 = SURFACE_SIDE_STYLE('',(#546443)); +#546443 = SURFACE_STYLE_FILL_AREA(#546444); +#546444 = FILL_AREA_STYLE('',(#546445)); +#546445 = FILL_AREA_STYLE_COLOUR('',#546242); +#546446 = OVER_RIDING_STYLED_ITEM('overriding color',(#546447),#109062, + #546228); +#546447 = PRESENTATION_STYLE_ASSIGNMENT((#546448)); +#546448 = SURFACE_STYLE_USAGE(.BOTH.,#546449); +#546449 = SURFACE_SIDE_STYLE('',(#546450)); +#546450 = SURFACE_STYLE_FILL_AREA(#546451); +#546451 = FILL_AREA_STYLE('',(#546452)); +#546452 = FILL_AREA_STYLE_COLOUR('',#546242); +#546453 = OVER_RIDING_STYLED_ITEM('overriding color',(#546454),#109091, + #546228); +#546454 = PRESENTATION_STYLE_ASSIGNMENT((#546455)); +#546455 = SURFACE_STYLE_USAGE(.BOTH.,#546456); +#546456 = SURFACE_SIDE_STYLE('',(#546457)); +#546457 = SURFACE_STYLE_FILL_AREA(#546458); +#546458 = FILL_AREA_STYLE('',(#546459)); +#546459 = FILL_AREA_STYLE_COLOUR('',#546242); +#546460 = OVER_RIDING_STYLED_ITEM('overriding color',(#546461),#109120, + #546228); +#546461 = PRESENTATION_STYLE_ASSIGNMENT((#546462)); +#546462 = SURFACE_STYLE_USAGE(.BOTH.,#546463); +#546463 = SURFACE_SIDE_STYLE('',(#546464)); +#546464 = SURFACE_STYLE_FILL_AREA(#546465); +#546465 = FILL_AREA_STYLE('',(#546466)); +#546466 = FILL_AREA_STYLE_COLOUR('',#546242); +#546467 = OVER_RIDING_STYLED_ITEM('overriding color',(#546468),#109149, + #546228); +#546468 = PRESENTATION_STYLE_ASSIGNMENT((#546469)); +#546469 = SURFACE_STYLE_USAGE(.BOTH.,#546470); +#546470 = SURFACE_SIDE_STYLE('',(#546471)); +#546471 = SURFACE_STYLE_FILL_AREA(#546472); +#546472 = FILL_AREA_STYLE('',(#546473)); +#546473 = FILL_AREA_STYLE_COLOUR('',#546242); +#546474 = OVER_RIDING_STYLED_ITEM('overriding color',(#546475),#109173, + #546228); +#546475 = PRESENTATION_STYLE_ASSIGNMENT((#546476)); +#546476 = SURFACE_STYLE_USAGE(.BOTH.,#546477); +#546477 = SURFACE_SIDE_STYLE('',(#546478)); +#546478 = SURFACE_STYLE_FILL_AREA(#546479); +#546479 = FILL_AREA_STYLE('',(#546480)); +#546480 = FILL_AREA_STYLE_COLOUR('',#546242); +#546481 = OVER_RIDING_STYLED_ITEM('overriding color',(#546482),#109202, + #546228); +#546482 = PRESENTATION_STYLE_ASSIGNMENT((#546483)); +#546483 = SURFACE_STYLE_USAGE(.BOTH.,#546484); +#546484 = SURFACE_SIDE_STYLE('',(#546485)); +#546485 = SURFACE_STYLE_FILL_AREA(#546486); +#546486 = FILL_AREA_STYLE('',(#546487)); +#546487 = FILL_AREA_STYLE_COLOUR('',#546242); +#546488 = OVER_RIDING_STYLED_ITEM('overriding color',(#546489),#109231, + #546228); +#546489 = PRESENTATION_STYLE_ASSIGNMENT((#546490)); +#546490 = SURFACE_STYLE_USAGE(.BOTH.,#546491); +#546491 = SURFACE_SIDE_STYLE('',(#546492)); +#546492 = SURFACE_STYLE_FILL_AREA(#546493); +#546493 = FILL_AREA_STYLE('',(#546494)); +#546494 = FILL_AREA_STYLE_COLOUR('',#546242); +#546495 = OVER_RIDING_STYLED_ITEM('overriding color',(#546496),#109260, + #546228); +#546496 = PRESENTATION_STYLE_ASSIGNMENT((#546497)); +#546497 = SURFACE_STYLE_USAGE(.BOTH.,#546498); +#546498 = SURFACE_SIDE_STYLE('',(#546499)); +#546499 = SURFACE_STYLE_FILL_AREA(#546500); +#546500 = FILL_AREA_STYLE('',(#546501)); +#546501 = FILL_AREA_STYLE_COLOUR('',#546242); +#546502 = OVER_RIDING_STYLED_ITEM('overriding color',(#546503),#109289, + #546228); +#546503 = PRESENTATION_STYLE_ASSIGNMENT((#546504)); +#546504 = SURFACE_STYLE_USAGE(.BOTH.,#546505); +#546505 = SURFACE_SIDE_STYLE('',(#546506)); +#546506 = SURFACE_STYLE_FILL_AREA(#546507); +#546507 = FILL_AREA_STYLE('',(#546508)); +#546508 = FILL_AREA_STYLE_COLOUR('',#546242); +#546509 = OVER_RIDING_STYLED_ITEM('overriding color',(#546510),#109318, + #546228); +#546510 = PRESENTATION_STYLE_ASSIGNMENT((#546511)); +#546511 = SURFACE_STYLE_USAGE(.BOTH.,#546512); +#546512 = SURFACE_SIDE_STYLE('',(#546513)); +#546513 = SURFACE_STYLE_FILL_AREA(#546514); +#546514 = FILL_AREA_STYLE('',(#546515)); +#546515 = FILL_AREA_STYLE_COLOUR('',#546242); +#546516 = OVER_RIDING_STYLED_ITEM('overriding color',(#546517),#109347, + #546228); +#546517 = PRESENTATION_STYLE_ASSIGNMENT((#546518)); +#546518 = SURFACE_STYLE_USAGE(.BOTH.,#546519); +#546519 = SURFACE_SIDE_STYLE('',(#546520)); +#546520 = SURFACE_STYLE_FILL_AREA(#546521); +#546521 = FILL_AREA_STYLE('',(#546522)); +#546522 = FILL_AREA_STYLE_COLOUR('',#546242); +#546523 = OVER_RIDING_STYLED_ITEM('overriding color',(#546524),#109369, + #546228); +#546524 = PRESENTATION_STYLE_ASSIGNMENT((#546525)); +#546525 = SURFACE_STYLE_USAGE(.BOTH.,#546526); +#546526 = SURFACE_SIDE_STYLE('',(#546527)); +#546527 = SURFACE_STYLE_FILL_AREA(#546528); +#546528 = FILL_AREA_STYLE('',(#546529)); +#546529 = FILL_AREA_STYLE_COLOUR('',#546242); +#546530 = OVER_RIDING_STYLED_ITEM('overriding color',(#546531),#109395, + #546228); +#546531 = PRESENTATION_STYLE_ASSIGNMENT((#546532)); +#546532 = SURFACE_STYLE_USAGE(.BOTH.,#546533); +#546533 = SURFACE_SIDE_STYLE('',(#546534)); +#546534 = SURFACE_STYLE_FILL_AREA(#546535); +#546535 = FILL_AREA_STYLE('',(#546536)); +#546536 = FILL_AREA_STYLE_COLOUR('',#546242); +#546537 = OVER_RIDING_STYLED_ITEM('overriding color',(#546538),#109499, + #546228); +#546538 = PRESENTATION_STYLE_ASSIGNMENT((#546539)); +#546539 = SURFACE_STYLE_USAGE(.BOTH.,#546540); +#546540 = SURFACE_SIDE_STYLE('',(#546541)); +#546541 = SURFACE_STYLE_FILL_AREA(#546542); +#546542 = FILL_AREA_STYLE('',(#546543)); +#546543 = FILL_AREA_STYLE_COLOUR('',#546242); +#546544 = OVER_RIDING_STYLED_ITEM('overriding color',(#546545),#109731, + #546228); +#546545 = PRESENTATION_STYLE_ASSIGNMENT((#546546)); +#546546 = SURFACE_STYLE_USAGE(.BOTH.,#546547); +#546547 = SURFACE_SIDE_STYLE('',(#546548)); +#546548 = SURFACE_STYLE_FILL_AREA(#546549); +#546549 = FILL_AREA_STYLE('',(#546550)); +#546550 = FILL_AREA_STYLE_COLOUR('',#546242); +#546551 = OVER_RIDING_STYLED_ITEM('overriding color',(#546552),#109795, + #546228); +#546552 = PRESENTATION_STYLE_ASSIGNMENT((#546553)); +#546553 = SURFACE_STYLE_USAGE(.BOTH.,#546554); +#546554 = SURFACE_SIDE_STYLE('',(#546555)); +#546555 = SURFACE_STYLE_FILL_AREA(#546556); +#546556 = FILL_AREA_STYLE('',(#546557)); +#546557 = FILL_AREA_STYLE_COLOUR('',#546242); +#546558 = OVER_RIDING_STYLED_ITEM('overriding color',(#546559),#110157, + #546228); +#546559 = PRESENTATION_STYLE_ASSIGNMENT((#546560)); +#546560 = SURFACE_STYLE_USAGE(.BOTH.,#546561); +#546561 = SURFACE_SIDE_STYLE('',(#546562)); +#546562 = SURFACE_STYLE_FILL_AREA(#546563); +#546563 = FILL_AREA_STYLE('',(#546564)); +#546564 = FILL_AREA_STYLE_COLOUR('',#546242); +#546565 = OVER_RIDING_STYLED_ITEM('overriding color',(#546566),#110621, + #546228); +#546566 = PRESENTATION_STYLE_ASSIGNMENT((#546567)); +#546567 = SURFACE_STYLE_USAGE(.BOTH.,#546568); +#546568 = SURFACE_SIDE_STYLE('',(#546569)); +#546569 = SURFACE_STYLE_FILL_AREA(#546570); +#546570 = FILL_AREA_STYLE('',(#546571)); +#546571 = FILL_AREA_STYLE_COLOUR('',#546242); +#546572 = OVER_RIDING_STYLED_ITEM('overriding color',(#546573),#111121, + #546228); +#546573 = PRESENTATION_STYLE_ASSIGNMENT((#546574)); +#546574 = SURFACE_STYLE_USAGE(.BOTH.,#546575); +#546575 = SURFACE_SIDE_STYLE('',(#546576)); +#546576 = SURFACE_STYLE_FILL_AREA(#546577); +#546577 = FILL_AREA_STYLE('',(#546578)); +#546578 = FILL_AREA_STYLE_COLOUR('',#546242); +#546579 = OVER_RIDING_STYLED_ITEM('overriding color',(#546580),#111143, + #546228); +#546580 = PRESENTATION_STYLE_ASSIGNMENT((#546581)); +#546581 = SURFACE_STYLE_USAGE(.BOTH.,#546582); +#546582 = SURFACE_SIDE_STYLE('',(#546583)); +#546583 = SURFACE_STYLE_FILL_AREA(#546584); +#546584 = FILL_AREA_STYLE('',(#546585)); +#546585 = FILL_AREA_STYLE_COLOUR('',#546242); +#546586 = OVER_RIDING_STYLED_ITEM('overriding color',(#546587),#111160, + #546228); +#546587 = PRESENTATION_STYLE_ASSIGNMENT((#546588)); +#546588 = SURFACE_STYLE_USAGE(.BOTH.,#546589); +#546589 = SURFACE_SIDE_STYLE('',(#546590)); +#546590 = SURFACE_STYLE_FILL_AREA(#546591); +#546591 = FILL_AREA_STYLE('',(#546592)); +#546592 = FILL_AREA_STYLE_COLOUR('',#546242); +#546593 = OVER_RIDING_STYLED_ITEM('overriding color',(#546594),#111177, + #546228); +#546594 = PRESENTATION_STYLE_ASSIGNMENT((#546595)); +#546595 = SURFACE_STYLE_USAGE(.BOTH.,#546596); +#546596 = SURFACE_SIDE_STYLE('',(#546597)); +#546597 = SURFACE_STYLE_FILL_AREA(#546598); +#546598 = FILL_AREA_STYLE('',(#546599)); +#546599 = FILL_AREA_STYLE_COLOUR('',#546242); +#546600 = OVER_RIDING_STYLED_ITEM('overriding color',(#546601),#111194, + #546228); +#546601 = PRESENTATION_STYLE_ASSIGNMENT((#546602)); +#546602 = SURFACE_STYLE_USAGE(.BOTH.,#546603); +#546603 = SURFACE_SIDE_STYLE('',(#546604)); +#546604 = SURFACE_STYLE_FILL_AREA(#546605); +#546605 = FILL_AREA_STYLE('',(#546606)); +#546606 = FILL_AREA_STYLE_COLOUR('',#546242); +#546607 = OVER_RIDING_STYLED_ITEM('overriding color',(#546608),#111211, + #546228); +#546608 = PRESENTATION_STYLE_ASSIGNMENT((#546609)); +#546609 = SURFACE_STYLE_USAGE(.BOTH.,#546610); +#546610 = SURFACE_SIDE_STYLE('',(#546611)); +#546611 = SURFACE_STYLE_FILL_AREA(#546612); +#546612 = FILL_AREA_STYLE('',(#546613)); +#546613 = FILL_AREA_STYLE_COLOUR('',#546242); +#546614 = OVER_RIDING_STYLED_ITEM('overriding color',(#546615),#111228, + #546228); +#546615 = PRESENTATION_STYLE_ASSIGNMENT((#546616)); +#546616 = SURFACE_STYLE_USAGE(.BOTH.,#546617); +#546617 = SURFACE_SIDE_STYLE('',(#546618)); +#546618 = SURFACE_STYLE_FILL_AREA(#546619); +#546619 = FILL_AREA_STYLE('',(#546620)); +#546620 = FILL_AREA_STYLE_COLOUR('',#546242); +#546621 = OVER_RIDING_STYLED_ITEM('overriding color',(#546622),#111245, + #546228); +#546622 = PRESENTATION_STYLE_ASSIGNMENT((#546623)); +#546623 = SURFACE_STYLE_USAGE(.BOTH.,#546624); +#546624 = SURFACE_SIDE_STYLE('',(#546625)); +#546625 = SURFACE_STYLE_FILL_AREA(#546626); +#546626 = FILL_AREA_STYLE('',(#546627)); +#546627 = FILL_AREA_STYLE_COLOUR('',#546242); +#546628 = OVER_RIDING_STYLED_ITEM('overriding color',(#546629),#111262, + #546228); +#546629 = PRESENTATION_STYLE_ASSIGNMENT((#546630)); +#546630 = SURFACE_STYLE_USAGE(.BOTH.,#546631); +#546631 = SURFACE_SIDE_STYLE('',(#546632)); +#546632 = SURFACE_STYLE_FILL_AREA(#546633); +#546633 = FILL_AREA_STYLE('',(#546634)); +#546634 = FILL_AREA_STYLE_COLOUR('',#546242); +#546635 = OVER_RIDING_STYLED_ITEM('overriding color',(#546636),#111279, + #546228); +#546636 = PRESENTATION_STYLE_ASSIGNMENT((#546637)); +#546637 = SURFACE_STYLE_USAGE(.BOTH.,#546638); +#546638 = SURFACE_SIDE_STYLE('',(#546639)); +#546639 = SURFACE_STYLE_FILL_AREA(#546640); +#546640 = FILL_AREA_STYLE('',(#546641)); +#546641 = FILL_AREA_STYLE_COLOUR('',#546242); +#546642 = OVER_RIDING_STYLED_ITEM('overriding color',(#546643),#111296, + #546228); +#546643 = PRESENTATION_STYLE_ASSIGNMENT((#546644)); +#546644 = SURFACE_STYLE_USAGE(.BOTH.,#546645); +#546645 = SURFACE_SIDE_STYLE('',(#546646)); +#546646 = SURFACE_STYLE_FILL_AREA(#546647); +#546647 = FILL_AREA_STYLE('',(#546648)); +#546648 = FILL_AREA_STYLE_COLOUR('',#546242); +#546649 = OVER_RIDING_STYLED_ITEM('overriding color',(#546650),#111313, + #546228); +#546650 = PRESENTATION_STYLE_ASSIGNMENT((#546651)); +#546651 = SURFACE_STYLE_USAGE(.BOTH.,#546652); +#546652 = SURFACE_SIDE_STYLE('',(#546653)); +#546653 = SURFACE_STYLE_FILL_AREA(#546654); +#546654 = FILL_AREA_STYLE('',(#546655)); +#546655 = FILL_AREA_STYLE_COLOUR('',#546242); +#546656 = OVER_RIDING_STYLED_ITEM('overriding color',(#546657),#111325, + #546228); +#546657 = PRESENTATION_STYLE_ASSIGNMENT((#546658)); +#546658 = SURFACE_STYLE_USAGE(.BOTH.,#546659); +#546659 = SURFACE_SIDE_STYLE('',(#546660)); +#546660 = SURFACE_STYLE_FILL_AREA(#546661); +#546661 = FILL_AREA_STYLE('',(#546662)); +#546662 = FILL_AREA_STYLE_COLOUR('',#546242); +#546663 = OVER_RIDING_STYLED_ITEM('overriding color',(#546664),#111347, + #546228); +#546664 = PRESENTATION_STYLE_ASSIGNMENT((#546665)); +#546665 = SURFACE_STYLE_USAGE(.BOTH.,#546666); +#546666 = SURFACE_SIDE_STYLE('',(#546667)); +#546667 = SURFACE_STYLE_FILL_AREA(#546668); +#546668 = FILL_AREA_STYLE('',(#546669)); +#546669 = FILL_AREA_STYLE_COLOUR('',#546242); +#546670 = OVER_RIDING_STYLED_ITEM('overriding color',(#546671),#111364, + #546228); +#546671 = PRESENTATION_STYLE_ASSIGNMENT((#546672)); +#546672 = SURFACE_STYLE_USAGE(.BOTH.,#546673); +#546673 = SURFACE_SIDE_STYLE('',(#546674)); +#546674 = SURFACE_STYLE_FILL_AREA(#546675); +#546675 = FILL_AREA_STYLE('',(#546676)); +#546676 = FILL_AREA_STYLE_COLOUR('',#546242); +#546677 = OVER_RIDING_STYLED_ITEM('overriding color',(#546678),#111381, + #546228); +#546678 = PRESENTATION_STYLE_ASSIGNMENT((#546679)); +#546679 = SURFACE_STYLE_USAGE(.BOTH.,#546680); +#546680 = SURFACE_SIDE_STYLE('',(#546681)); +#546681 = SURFACE_STYLE_FILL_AREA(#546682); +#546682 = FILL_AREA_STYLE('',(#546683)); +#546683 = FILL_AREA_STYLE_COLOUR('',#546242); +#546684 = OVER_RIDING_STYLED_ITEM('overriding color',(#546685),#111398, + #546228); +#546685 = PRESENTATION_STYLE_ASSIGNMENT((#546686)); +#546686 = SURFACE_STYLE_USAGE(.BOTH.,#546687); +#546687 = SURFACE_SIDE_STYLE('',(#546688)); +#546688 = SURFACE_STYLE_FILL_AREA(#546689); +#546689 = FILL_AREA_STYLE('',(#546690)); +#546690 = FILL_AREA_STYLE_COLOUR('',#546242); +#546691 = OVER_RIDING_STYLED_ITEM('overriding color',(#546692),#111415, + #546228); +#546692 = PRESENTATION_STYLE_ASSIGNMENT((#546693)); +#546693 = SURFACE_STYLE_USAGE(.BOTH.,#546694); +#546694 = SURFACE_SIDE_STYLE('',(#546695)); +#546695 = SURFACE_STYLE_FILL_AREA(#546696); +#546696 = FILL_AREA_STYLE('',(#546697)); +#546697 = FILL_AREA_STYLE_COLOUR('',#546242); +#546698 = OVER_RIDING_STYLED_ITEM('overriding color',(#546699),#111432, + #546228); +#546699 = PRESENTATION_STYLE_ASSIGNMENT((#546700)); +#546700 = SURFACE_STYLE_USAGE(.BOTH.,#546701); +#546701 = SURFACE_SIDE_STYLE('',(#546702)); +#546702 = SURFACE_STYLE_FILL_AREA(#546703); +#546703 = FILL_AREA_STYLE('',(#546704)); +#546704 = FILL_AREA_STYLE_COLOUR('',#546242); +#546705 = OVER_RIDING_STYLED_ITEM('overriding color',(#546706),#111449, + #546228); +#546706 = PRESENTATION_STYLE_ASSIGNMENT((#546707)); +#546707 = SURFACE_STYLE_USAGE(.BOTH.,#546708); +#546708 = SURFACE_SIDE_STYLE('',(#546709)); +#546709 = SURFACE_STYLE_FILL_AREA(#546710); +#546710 = FILL_AREA_STYLE('',(#546711)); +#546711 = FILL_AREA_STYLE_COLOUR('',#546242); +#546712 = OVER_RIDING_STYLED_ITEM('overriding color',(#546713),#111466, + #546228); +#546713 = PRESENTATION_STYLE_ASSIGNMENT((#546714)); +#546714 = SURFACE_STYLE_USAGE(.BOTH.,#546715); +#546715 = SURFACE_SIDE_STYLE('',(#546716)); +#546716 = SURFACE_STYLE_FILL_AREA(#546717); +#546717 = FILL_AREA_STYLE('',(#546718)); +#546718 = FILL_AREA_STYLE_COLOUR('',#546242); +#546719 = OVER_RIDING_STYLED_ITEM('overriding color',(#546720),#111483, + #546228); +#546720 = PRESENTATION_STYLE_ASSIGNMENT((#546721)); +#546721 = SURFACE_STYLE_USAGE(.BOTH.,#546722); +#546722 = SURFACE_SIDE_STYLE('',(#546723)); +#546723 = SURFACE_STYLE_FILL_AREA(#546724); +#546724 = FILL_AREA_STYLE('',(#546725)); +#546725 = FILL_AREA_STYLE_COLOUR('',#546242); +#546726 = OVER_RIDING_STYLED_ITEM('overriding color',(#546727),#111500, + #546228); +#546727 = PRESENTATION_STYLE_ASSIGNMENT((#546728)); +#546728 = SURFACE_STYLE_USAGE(.BOTH.,#546729); +#546729 = SURFACE_SIDE_STYLE('',(#546730)); +#546730 = SURFACE_STYLE_FILL_AREA(#546731); +#546731 = FILL_AREA_STYLE('',(#546732)); +#546732 = FILL_AREA_STYLE_COLOUR('',#546242); +#546733 = OVER_RIDING_STYLED_ITEM('overriding color',(#546734),#111517, + #546228); +#546734 = PRESENTATION_STYLE_ASSIGNMENT((#546735)); +#546735 = SURFACE_STYLE_USAGE(.BOTH.,#546736); +#546736 = SURFACE_SIDE_STYLE('',(#546737)); +#546737 = SURFACE_STYLE_FILL_AREA(#546738); +#546738 = FILL_AREA_STYLE('',(#546739)); +#546739 = FILL_AREA_STYLE_COLOUR('',#546242); +#546740 = OVER_RIDING_STYLED_ITEM('overriding color',(#546741),#111534, + #546228); +#546741 = PRESENTATION_STYLE_ASSIGNMENT((#546742)); +#546742 = SURFACE_STYLE_USAGE(.BOTH.,#546743); +#546743 = SURFACE_SIDE_STYLE('',(#546744)); +#546744 = SURFACE_STYLE_FILL_AREA(#546745); +#546745 = FILL_AREA_STYLE('',(#546746)); +#546746 = FILL_AREA_STYLE_COLOUR('',#546242); +#546747 = OVER_RIDING_STYLED_ITEM('overriding color',(#546748),#111551, + #546228); +#546748 = PRESENTATION_STYLE_ASSIGNMENT((#546749)); +#546749 = SURFACE_STYLE_USAGE(.BOTH.,#546750); +#546750 = SURFACE_SIDE_STYLE('',(#546751)); +#546751 = SURFACE_STYLE_FILL_AREA(#546752); +#546752 = FILL_AREA_STYLE('',(#546753)); +#546753 = FILL_AREA_STYLE_COLOUR('',#546242); +#546754 = OVER_RIDING_STYLED_ITEM('overriding color',(#546755),#111568, + #546228); +#546755 = PRESENTATION_STYLE_ASSIGNMENT((#546756)); +#546756 = SURFACE_STYLE_USAGE(.BOTH.,#546757); +#546757 = SURFACE_SIDE_STYLE('',(#546758)); +#546758 = SURFACE_STYLE_FILL_AREA(#546759); +#546759 = FILL_AREA_STYLE('',(#546760)); +#546760 = FILL_AREA_STYLE_COLOUR('',#546242); +#546761 = OVER_RIDING_STYLED_ITEM('overriding color',(#546762),#111585, + #546228); +#546762 = PRESENTATION_STYLE_ASSIGNMENT((#546763)); +#546763 = SURFACE_STYLE_USAGE(.BOTH.,#546764); +#546764 = SURFACE_SIDE_STYLE('',(#546765)); +#546765 = SURFACE_STYLE_FILL_AREA(#546766); +#546766 = FILL_AREA_STYLE('',(#546767)); +#546767 = FILL_AREA_STYLE_COLOUR('',#546242); +#546768 = OVER_RIDING_STYLED_ITEM('overriding color',(#546769),#111602, + #546228); +#546769 = PRESENTATION_STYLE_ASSIGNMENT((#546770)); +#546770 = SURFACE_STYLE_USAGE(.BOTH.,#546771); +#546771 = SURFACE_SIDE_STYLE('',(#546772)); +#546772 = SURFACE_STYLE_FILL_AREA(#546773); +#546773 = FILL_AREA_STYLE('',(#546774)); +#546774 = FILL_AREA_STYLE_COLOUR('',#546242); +#546775 = OVER_RIDING_STYLED_ITEM('overriding color',(#546776),#111619, + #546228); +#546776 = PRESENTATION_STYLE_ASSIGNMENT((#546777)); +#546777 = SURFACE_STYLE_USAGE(.BOTH.,#546778); +#546778 = SURFACE_SIDE_STYLE('',(#546779)); +#546779 = SURFACE_STYLE_FILL_AREA(#546780); +#546780 = FILL_AREA_STYLE('',(#546781)); +#546781 = FILL_AREA_STYLE_COLOUR('',#546242); +#546782 = OVER_RIDING_STYLED_ITEM('overriding color',(#546783),#111636, + #546228); +#546783 = PRESENTATION_STYLE_ASSIGNMENT((#546784)); +#546784 = SURFACE_STYLE_USAGE(.BOTH.,#546785); +#546785 = SURFACE_SIDE_STYLE('',(#546786)); +#546786 = SURFACE_STYLE_FILL_AREA(#546787); +#546787 = FILL_AREA_STYLE('',(#546788)); +#546788 = FILL_AREA_STYLE_COLOUR('',#546242); +#546789 = OVER_RIDING_STYLED_ITEM('overriding color',(#546790),#111653, + #546228); +#546790 = PRESENTATION_STYLE_ASSIGNMENT((#546791)); +#546791 = SURFACE_STYLE_USAGE(.BOTH.,#546792); +#546792 = SURFACE_SIDE_STYLE('',(#546793)); +#546793 = SURFACE_STYLE_FILL_AREA(#546794); +#546794 = FILL_AREA_STYLE('',(#546795)); +#546795 = FILL_AREA_STYLE_COLOUR('',#546242); +#546796 = OVER_RIDING_STYLED_ITEM('overriding color',(#546797),#111670, + #546228); +#546797 = PRESENTATION_STYLE_ASSIGNMENT((#546798)); +#546798 = SURFACE_STYLE_USAGE(.BOTH.,#546799); +#546799 = SURFACE_SIDE_STYLE('',(#546800)); +#546800 = SURFACE_STYLE_FILL_AREA(#546801); +#546801 = FILL_AREA_STYLE('',(#546802)); +#546802 = FILL_AREA_STYLE_COLOUR('',#546242); +#546803 = OVER_RIDING_STYLED_ITEM('overriding color',(#546804),#111687, + #546228); +#546804 = PRESENTATION_STYLE_ASSIGNMENT((#546805)); +#546805 = SURFACE_STYLE_USAGE(.BOTH.,#546806); +#546806 = SURFACE_SIDE_STYLE('',(#546807)); +#546807 = SURFACE_STYLE_FILL_AREA(#546808); +#546808 = FILL_AREA_STYLE('',(#546809)); +#546809 = FILL_AREA_STYLE_COLOUR('',#546242); +#546810 = OVER_RIDING_STYLED_ITEM('overriding color',(#546811),#111704, + #546228); +#546811 = PRESENTATION_STYLE_ASSIGNMENT((#546812)); +#546812 = SURFACE_STYLE_USAGE(.BOTH.,#546813); +#546813 = SURFACE_SIDE_STYLE('',(#546814)); +#546814 = SURFACE_STYLE_FILL_AREA(#546815); +#546815 = FILL_AREA_STYLE('',(#546816)); +#546816 = FILL_AREA_STYLE_COLOUR('',#546242); +#546817 = OVER_RIDING_STYLED_ITEM('overriding color',(#546818),#111721, + #546228); +#546818 = PRESENTATION_STYLE_ASSIGNMENT((#546819)); +#546819 = SURFACE_STYLE_USAGE(.BOTH.,#546820); +#546820 = SURFACE_SIDE_STYLE('',(#546821)); +#546821 = SURFACE_STYLE_FILL_AREA(#546822); +#546822 = FILL_AREA_STYLE('',(#546823)); +#546823 = FILL_AREA_STYLE_COLOUR('',#546242); +#546824 = OVER_RIDING_STYLED_ITEM('overriding color',(#546825),#111738, + #546228); +#546825 = PRESENTATION_STYLE_ASSIGNMENT((#546826)); +#546826 = SURFACE_STYLE_USAGE(.BOTH.,#546827); +#546827 = SURFACE_SIDE_STYLE('',(#546828)); +#546828 = SURFACE_STYLE_FILL_AREA(#546829); +#546829 = FILL_AREA_STYLE('',(#546830)); +#546830 = FILL_AREA_STYLE_COLOUR('',#546242); +#546831 = OVER_RIDING_STYLED_ITEM('overriding color',(#546832),#111755, + #546228); +#546832 = PRESENTATION_STYLE_ASSIGNMENT((#546833)); +#546833 = SURFACE_STYLE_USAGE(.BOTH.,#546834); +#546834 = SURFACE_SIDE_STYLE('',(#546835)); +#546835 = SURFACE_STYLE_FILL_AREA(#546836); +#546836 = FILL_AREA_STYLE('',(#546837)); +#546837 = FILL_AREA_STYLE_COLOUR('',#546242); +#546838 = OVER_RIDING_STYLED_ITEM('overriding color',(#546839),#111772, + #546228); +#546839 = PRESENTATION_STYLE_ASSIGNMENT((#546840)); +#546840 = SURFACE_STYLE_USAGE(.BOTH.,#546841); +#546841 = SURFACE_SIDE_STYLE('',(#546842)); +#546842 = SURFACE_STYLE_FILL_AREA(#546843); +#546843 = FILL_AREA_STYLE('',(#546844)); +#546844 = FILL_AREA_STYLE_COLOUR('',#546242); +#546845 = OVER_RIDING_STYLED_ITEM('overriding color',(#546846),#111789, + #546228); +#546846 = PRESENTATION_STYLE_ASSIGNMENT((#546847)); +#546847 = SURFACE_STYLE_USAGE(.BOTH.,#546848); +#546848 = SURFACE_SIDE_STYLE('',(#546849)); +#546849 = SURFACE_STYLE_FILL_AREA(#546850); +#546850 = FILL_AREA_STYLE('',(#546851)); +#546851 = FILL_AREA_STYLE_COLOUR('',#546242); +#546852 = OVER_RIDING_STYLED_ITEM('overriding color',(#546853),#111801, + #546228); +#546853 = PRESENTATION_STYLE_ASSIGNMENT((#546854)); +#546854 = SURFACE_STYLE_USAGE(.BOTH.,#546855); +#546855 = SURFACE_SIDE_STYLE('',(#546856)); +#546856 = SURFACE_STYLE_FILL_AREA(#546857); +#546857 = FILL_AREA_STYLE('',(#546858)); +#546858 = FILL_AREA_STYLE_COLOUR('',#546242); +#546859 = OVER_RIDING_STYLED_ITEM('overriding color',(#546860),#111823, + #546228); +#546860 = PRESENTATION_STYLE_ASSIGNMENT((#546861)); +#546861 = SURFACE_STYLE_USAGE(.BOTH.,#546862); +#546862 = SURFACE_SIDE_STYLE('',(#546863)); +#546863 = SURFACE_STYLE_FILL_AREA(#546864); +#546864 = FILL_AREA_STYLE('',(#546865)); +#546865 = FILL_AREA_STYLE_COLOUR('',#546242); +#546866 = OVER_RIDING_STYLED_ITEM('overriding color',(#546867),#111840, + #546228); +#546867 = PRESENTATION_STYLE_ASSIGNMENT((#546868)); +#546868 = SURFACE_STYLE_USAGE(.BOTH.,#546869); +#546869 = SURFACE_SIDE_STYLE('',(#546870)); +#546870 = SURFACE_STYLE_FILL_AREA(#546871); +#546871 = FILL_AREA_STYLE('',(#546872)); +#546872 = FILL_AREA_STYLE_COLOUR('',#546242); +#546873 = OVER_RIDING_STYLED_ITEM('overriding color',(#546874),#111857, + #546228); +#546874 = PRESENTATION_STYLE_ASSIGNMENT((#546875)); +#546875 = SURFACE_STYLE_USAGE(.BOTH.,#546876); +#546876 = SURFACE_SIDE_STYLE('',(#546877)); +#546877 = SURFACE_STYLE_FILL_AREA(#546878); +#546878 = FILL_AREA_STYLE('',(#546879)); +#546879 = FILL_AREA_STYLE_COLOUR('',#546242); +#546880 = OVER_RIDING_STYLED_ITEM('overriding color',(#546881),#111874, + #546228); +#546881 = PRESENTATION_STYLE_ASSIGNMENT((#546882)); +#546882 = SURFACE_STYLE_USAGE(.BOTH.,#546883); +#546883 = SURFACE_SIDE_STYLE('',(#546884)); +#546884 = SURFACE_STYLE_FILL_AREA(#546885); +#546885 = FILL_AREA_STYLE('',(#546886)); +#546886 = FILL_AREA_STYLE_COLOUR('',#546242); +#546887 = OVER_RIDING_STYLED_ITEM('overriding color',(#546888),#111891, + #546228); +#546888 = PRESENTATION_STYLE_ASSIGNMENT((#546889)); +#546889 = SURFACE_STYLE_USAGE(.BOTH.,#546890); +#546890 = SURFACE_SIDE_STYLE('',(#546891)); +#546891 = SURFACE_STYLE_FILL_AREA(#546892); +#546892 = FILL_AREA_STYLE('',(#546893)); +#546893 = FILL_AREA_STYLE_COLOUR('',#546242); +#546894 = OVER_RIDING_STYLED_ITEM('overriding color',(#546895),#111908, + #546228); +#546895 = PRESENTATION_STYLE_ASSIGNMENT((#546896)); +#546896 = SURFACE_STYLE_USAGE(.BOTH.,#546897); +#546897 = SURFACE_SIDE_STYLE('',(#546898)); +#546898 = SURFACE_STYLE_FILL_AREA(#546899); +#546899 = FILL_AREA_STYLE('',(#546900)); +#546900 = FILL_AREA_STYLE_COLOUR('',#546242); +#546901 = OVER_RIDING_STYLED_ITEM('overriding color',(#546902),#111920, + #546228); +#546902 = PRESENTATION_STYLE_ASSIGNMENT((#546903)); +#546903 = SURFACE_STYLE_USAGE(.BOTH.,#546904); +#546904 = SURFACE_SIDE_STYLE('',(#546905)); +#546905 = SURFACE_STYLE_FILL_AREA(#546906); +#546906 = FILL_AREA_STYLE('',(#546907)); +#546907 = FILL_AREA_STYLE_COLOUR('',#546242); +#546908 = OVER_RIDING_STYLED_ITEM('overriding color',(#546909),#111942, + #546228); +#546909 = PRESENTATION_STYLE_ASSIGNMENT((#546910)); +#546910 = SURFACE_STYLE_USAGE(.BOTH.,#546911); +#546911 = SURFACE_SIDE_STYLE('',(#546912)); +#546912 = SURFACE_STYLE_FILL_AREA(#546913); +#546913 = FILL_AREA_STYLE('',(#546914)); +#546914 = FILL_AREA_STYLE_COLOUR('',#546242); +#546915 = OVER_RIDING_STYLED_ITEM('overriding color',(#546916),#111959, + #546228); +#546916 = PRESENTATION_STYLE_ASSIGNMENT((#546917)); +#546917 = SURFACE_STYLE_USAGE(.BOTH.,#546918); +#546918 = SURFACE_SIDE_STYLE('',(#546919)); +#546919 = SURFACE_STYLE_FILL_AREA(#546920); +#546920 = FILL_AREA_STYLE('',(#546921)); +#546921 = FILL_AREA_STYLE_COLOUR('',#546242); +#546922 = OVER_RIDING_STYLED_ITEM('overriding color',(#546923),#111976, + #546228); +#546923 = PRESENTATION_STYLE_ASSIGNMENT((#546924)); +#546924 = SURFACE_STYLE_USAGE(.BOTH.,#546925); +#546925 = SURFACE_SIDE_STYLE('',(#546926)); +#546926 = SURFACE_STYLE_FILL_AREA(#546927); +#546927 = FILL_AREA_STYLE('',(#546928)); +#546928 = FILL_AREA_STYLE_COLOUR('',#546242); +#546929 = OVER_RIDING_STYLED_ITEM('overriding color',(#546930),#111993, + #546228); +#546930 = PRESENTATION_STYLE_ASSIGNMENT((#546931)); +#546931 = SURFACE_STYLE_USAGE(.BOTH.,#546932); +#546932 = SURFACE_SIDE_STYLE('',(#546933)); +#546933 = SURFACE_STYLE_FILL_AREA(#546934); +#546934 = FILL_AREA_STYLE('',(#546935)); +#546935 = FILL_AREA_STYLE_COLOUR('',#546242); +#546936 = OVER_RIDING_STYLED_ITEM('overriding color',(#546937),#112010, + #546228); +#546937 = PRESENTATION_STYLE_ASSIGNMENT((#546938)); +#546938 = SURFACE_STYLE_USAGE(.BOTH.,#546939); +#546939 = SURFACE_SIDE_STYLE('',(#546940)); +#546940 = SURFACE_STYLE_FILL_AREA(#546941); +#546941 = FILL_AREA_STYLE('',(#546942)); +#546942 = FILL_AREA_STYLE_COLOUR('',#546242); +#546943 = OVER_RIDING_STYLED_ITEM('overriding color',(#546944),#112027, + #546228); +#546944 = PRESENTATION_STYLE_ASSIGNMENT((#546945)); +#546945 = SURFACE_STYLE_USAGE(.BOTH.,#546946); +#546946 = SURFACE_SIDE_STYLE('',(#546947)); +#546947 = SURFACE_STYLE_FILL_AREA(#546948); +#546948 = FILL_AREA_STYLE('',(#546949)); +#546949 = FILL_AREA_STYLE_COLOUR('',#546242); +#546950 = OVER_RIDING_STYLED_ITEM('overriding color',(#546951),#112044, + #546228); +#546951 = PRESENTATION_STYLE_ASSIGNMENT((#546952)); +#546952 = SURFACE_STYLE_USAGE(.BOTH.,#546953); +#546953 = SURFACE_SIDE_STYLE('',(#546954)); +#546954 = SURFACE_STYLE_FILL_AREA(#546955); +#546955 = FILL_AREA_STYLE('',(#546956)); +#546956 = FILL_AREA_STYLE_COLOUR('',#546242); +#546957 = OVER_RIDING_STYLED_ITEM('overriding color',(#546958),#112061, + #546228); +#546958 = PRESENTATION_STYLE_ASSIGNMENT((#546959)); +#546959 = SURFACE_STYLE_USAGE(.BOTH.,#546960); +#546960 = SURFACE_SIDE_STYLE('',(#546961)); +#546961 = SURFACE_STYLE_FILL_AREA(#546962); +#546962 = FILL_AREA_STYLE('',(#546963)); +#546963 = FILL_AREA_STYLE_COLOUR('',#546242); +#546964 = OVER_RIDING_STYLED_ITEM('overriding color',(#546965),#112078, + #546228); +#546965 = PRESENTATION_STYLE_ASSIGNMENT((#546966)); +#546966 = SURFACE_STYLE_USAGE(.BOTH.,#546967); +#546967 = SURFACE_SIDE_STYLE('',(#546968)); +#546968 = SURFACE_STYLE_FILL_AREA(#546969); +#546969 = FILL_AREA_STYLE('',(#546970)); +#546970 = FILL_AREA_STYLE_COLOUR('',#546242); +#546971 = OVER_RIDING_STYLED_ITEM('overriding color',(#546972),#112095, + #546228); +#546972 = PRESENTATION_STYLE_ASSIGNMENT((#546973)); +#546973 = SURFACE_STYLE_USAGE(.BOTH.,#546974); +#546974 = SURFACE_SIDE_STYLE('',(#546975)); +#546975 = SURFACE_STYLE_FILL_AREA(#546976); +#546976 = FILL_AREA_STYLE('',(#546977)); +#546977 = FILL_AREA_STYLE_COLOUR('',#546242); +#546978 = OVER_RIDING_STYLED_ITEM('overriding color',(#546979),#112112, + #546228); +#546979 = PRESENTATION_STYLE_ASSIGNMENT((#546980)); +#546980 = SURFACE_STYLE_USAGE(.BOTH.,#546981); +#546981 = SURFACE_SIDE_STYLE('',(#546982)); +#546982 = SURFACE_STYLE_FILL_AREA(#546983); +#546983 = FILL_AREA_STYLE('',(#546984)); +#546984 = FILL_AREA_STYLE_COLOUR('',#546242); +#546985 = OVER_RIDING_STYLED_ITEM('overriding color',(#546986),#112129, + #546228); +#546986 = PRESENTATION_STYLE_ASSIGNMENT((#546987)); +#546987 = SURFACE_STYLE_USAGE(.BOTH.,#546988); +#546988 = SURFACE_SIDE_STYLE('',(#546989)); +#546989 = SURFACE_STYLE_FILL_AREA(#546990); +#546990 = FILL_AREA_STYLE('',(#546991)); +#546991 = FILL_AREA_STYLE_COLOUR('',#546242); +#546992 = OVER_RIDING_STYLED_ITEM('overriding color',(#546993),#112146, + #546228); +#546993 = PRESENTATION_STYLE_ASSIGNMENT((#546994)); +#546994 = SURFACE_STYLE_USAGE(.BOTH.,#546995); +#546995 = SURFACE_SIDE_STYLE('',(#546996)); +#546996 = SURFACE_STYLE_FILL_AREA(#546997); +#546997 = FILL_AREA_STYLE('',(#546998)); +#546998 = FILL_AREA_STYLE_COLOUR('',#546242); +#546999 = OVER_RIDING_STYLED_ITEM('overriding color',(#547000),#112163, + #546228); +#547000 = PRESENTATION_STYLE_ASSIGNMENT((#547001)); +#547001 = SURFACE_STYLE_USAGE(.BOTH.,#547002); +#547002 = SURFACE_SIDE_STYLE('',(#547003)); +#547003 = SURFACE_STYLE_FILL_AREA(#547004); +#547004 = FILL_AREA_STYLE('',(#547005)); +#547005 = FILL_AREA_STYLE_COLOUR('',#546242); +#547006 = OVER_RIDING_STYLED_ITEM('overriding color',(#547007),#112180, + #546228); +#547007 = PRESENTATION_STYLE_ASSIGNMENT((#547008)); +#547008 = SURFACE_STYLE_USAGE(.BOTH.,#547009); +#547009 = SURFACE_SIDE_STYLE('',(#547010)); +#547010 = SURFACE_STYLE_FILL_AREA(#547011); +#547011 = FILL_AREA_STYLE('',(#547012)); +#547012 = FILL_AREA_STYLE_COLOUR('',#546242); +#547013 = OVER_RIDING_STYLED_ITEM('overriding color',(#547014),#112197, + #546228); +#547014 = PRESENTATION_STYLE_ASSIGNMENT((#547015)); +#547015 = SURFACE_STYLE_USAGE(.BOTH.,#547016); +#547016 = SURFACE_SIDE_STYLE('',(#547017)); +#547017 = SURFACE_STYLE_FILL_AREA(#547018); +#547018 = FILL_AREA_STYLE('',(#547019)); +#547019 = FILL_AREA_STYLE_COLOUR('',#546242); +#547020 = OVER_RIDING_STYLED_ITEM('overriding color',(#547021),#112214, + #546228); +#547021 = PRESENTATION_STYLE_ASSIGNMENT((#547022)); +#547022 = SURFACE_STYLE_USAGE(.BOTH.,#547023); +#547023 = SURFACE_SIDE_STYLE('',(#547024)); +#547024 = SURFACE_STYLE_FILL_AREA(#547025); +#547025 = FILL_AREA_STYLE('',(#547026)); +#547026 = FILL_AREA_STYLE_COLOUR('',#546242); +#547027 = OVER_RIDING_STYLED_ITEM('overriding color',(#547028),#112231, + #546228); +#547028 = PRESENTATION_STYLE_ASSIGNMENT((#547029)); +#547029 = SURFACE_STYLE_USAGE(.BOTH.,#547030); +#547030 = SURFACE_SIDE_STYLE('',(#547031)); +#547031 = SURFACE_STYLE_FILL_AREA(#547032); +#547032 = FILL_AREA_STYLE('',(#547033)); +#547033 = FILL_AREA_STYLE_COLOUR('',#546242); +#547034 = OVER_RIDING_STYLED_ITEM('overriding color',(#547035),#112248, + #546228); +#547035 = PRESENTATION_STYLE_ASSIGNMENT((#547036)); +#547036 = SURFACE_STYLE_USAGE(.BOTH.,#547037); +#547037 = SURFACE_SIDE_STYLE('',(#547038)); +#547038 = SURFACE_STYLE_FILL_AREA(#547039); +#547039 = FILL_AREA_STYLE('',(#547040)); +#547040 = FILL_AREA_STYLE_COLOUR('',#546242); +#547041 = OVER_RIDING_STYLED_ITEM('overriding color',(#547042),#112265, + #546228); +#547042 = PRESENTATION_STYLE_ASSIGNMENT((#547043)); +#547043 = SURFACE_STYLE_USAGE(.BOTH.,#547044); +#547044 = SURFACE_SIDE_STYLE('',(#547045)); +#547045 = SURFACE_STYLE_FILL_AREA(#547046); +#547046 = FILL_AREA_STYLE('',(#547047)); +#547047 = FILL_AREA_STYLE_COLOUR('',#546242); +#547048 = OVER_RIDING_STYLED_ITEM('overriding color',(#547049),#112282, + #546228); +#547049 = PRESENTATION_STYLE_ASSIGNMENT((#547050)); +#547050 = SURFACE_STYLE_USAGE(.BOTH.,#547051); +#547051 = SURFACE_SIDE_STYLE('',(#547052)); +#547052 = SURFACE_STYLE_FILL_AREA(#547053); +#547053 = FILL_AREA_STYLE('',(#547054)); +#547054 = FILL_AREA_STYLE_COLOUR('',#546242); +#547055 = OVER_RIDING_STYLED_ITEM('overriding color',(#547056),#112299, + #546228); +#547056 = PRESENTATION_STYLE_ASSIGNMENT((#547057)); +#547057 = SURFACE_STYLE_USAGE(.BOTH.,#547058); +#547058 = SURFACE_SIDE_STYLE('',(#547059)); +#547059 = SURFACE_STYLE_FILL_AREA(#547060); +#547060 = FILL_AREA_STYLE('',(#547061)); +#547061 = FILL_AREA_STYLE_COLOUR('',#546242); +#547062 = OVER_RIDING_STYLED_ITEM('overriding color',(#547063),#112316, + #546228); +#547063 = PRESENTATION_STYLE_ASSIGNMENT((#547064)); +#547064 = SURFACE_STYLE_USAGE(.BOTH.,#547065); +#547065 = SURFACE_SIDE_STYLE('',(#547066)); +#547066 = SURFACE_STYLE_FILL_AREA(#547067); +#547067 = FILL_AREA_STYLE('',(#547068)); +#547068 = FILL_AREA_STYLE_COLOUR('',#546242); +#547069 = OVER_RIDING_STYLED_ITEM('overriding color',(#547070),#112333, + #546228); +#547070 = PRESENTATION_STYLE_ASSIGNMENT((#547071)); +#547071 = SURFACE_STYLE_USAGE(.BOTH.,#547072); +#547072 = SURFACE_SIDE_STYLE('',(#547073)); +#547073 = SURFACE_STYLE_FILL_AREA(#547074); +#547074 = FILL_AREA_STYLE('',(#547075)); +#547075 = FILL_AREA_STYLE_COLOUR('',#546242); +#547076 = OVER_RIDING_STYLED_ITEM('overriding color',(#547077),#112350, + #546228); +#547077 = PRESENTATION_STYLE_ASSIGNMENT((#547078)); +#547078 = SURFACE_STYLE_USAGE(.BOTH.,#547079); +#547079 = SURFACE_SIDE_STYLE('',(#547080)); +#547080 = SURFACE_STYLE_FILL_AREA(#547081); +#547081 = FILL_AREA_STYLE('',(#547082)); +#547082 = FILL_AREA_STYLE_COLOUR('',#546242); +#547083 = OVER_RIDING_STYLED_ITEM('overriding color',(#547084),#112362, + #546228); +#547084 = PRESENTATION_STYLE_ASSIGNMENT((#547085)); +#547085 = SURFACE_STYLE_USAGE(.BOTH.,#547086); +#547086 = SURFACE_SIDE_STYLE('',(#547087)); +#547087 = SURFACE_STYLE_FILL_AREA(#547088); +#547088 = FILL_AREA_STYLE('',(#547089)); +#547089 = FILL_AREA_STYLE_COLOUR('',#546242); +#547090 = OVER_RIDING_STYLED_ITEM('overriding color',(#547091),#112384, + #546228); +#547091 = PRESENTATION_STYLE_ASSIGNMENT((#547092)); +#547092 = SURFACE_STYLE_USAGE(.BOTH.,#547093); +#547093 = SURFACE_SIDE_STYLE('',(#547094)); +#547094 = SURFACE_STYLE_FILL_AREA(#547095); +#547095 = FILL_AREA_STYLE('',(#547096)); +#547096 = FILL_AREA_STYLE_COLOUR('',#546242); +#547097 = OVER_RIDING_STYLED_ITEM('overriding color',(#547098),#112401, + #546228); +#547098 = PRESENTATION_STYLE_ASSIGNMENT((#547099)); +#547099 = SURFACE_STYLE_USAGE(.BOTH.,#547100); +#547100 = SURFACE_SIDE_STYLE('',(#547101)); +#547101 = SURFACE_STYLE_FILL_AREA(#547102); +#547102 = FILL_AREA_STYLE('',(#547103)); +#547103 = FILL_AREA_STYLE_COLOUR('',#546242); +#547104 = OVER_RIDING_STYLED_ITEM('overriding color',(#547105),#112418, + #546228); +#547105 = PRESENTATION_STYLE_ASSIGNMENT((#547106)); +#547106 = SURFACE_STYLE_USAGE(.BOTH.,#547107); +#547107 = SURFACE_SIDE_STYLE('',(#547108)); +#547108 = SURFACE_STYLE_FILL_AREA(#547109); +#547109 = FILL_AREA_STYLE('',(#547110)); +#547110 = FILL_AREA_STYLE_COLOUR('',#546242); +#547111 = OVER_RIDING_STYLED_ITEM('overriding color',(#547112),#112435, + #546228); +#547112 = PRESENTATION_STYLE_ASSIGNMENT((#547113)); +#547113 = SURFACE_STYLE_USAGE(.BOTH.,#547114); +#547114 = SURFACE_SIDE_STYLE('',(#547115)); +#547115 = SURFACE_STYLE_FILL_AREA(#547116); +#547116 = FILL_AREA_STYLE('',(#547117)); +#547117 = FILL_AREA_STYLE_COLOUR('',#546242); +#547118 = OVER_RIDING_STYLED_ITEM('overriding color',(#547119),#112452, + #546228); +#547119 = PRESENTATION_STYLE_ASSIGNMENT((#547120)); +#547120 = SURFACE_STYLE_USAGE(.BOTH.,#547121); +#547121 = SURFACE_SIDE_STYLE('',(#547122)); +#547122 = SURFACE_STYLE_FILL_AREA(#547123); +#547123 = FILL_AREA_STYLE('',(#547124)); +#547124 = FILL_AREA_STYLE_COLOUR('',#546242); +#547125 = OVER_RIDING_STYLED_ITEM('overriding color',(#547126),#112469, + #546228); +#547126 = PRESENTATION_STYLE_ASSIGNMENT((#547127)); +#547127 = SURFACE_STYLE_USAGE(.BOTH.,#547128); +#547128 = SURFACE_SIDE_STYLE('',(#547129)); +#547129 = SURFACE_STYLE_FILL_AREA(#547130); +#547130 = FILL_AREA_STYLE('',(#547131)); +#547131 = FILL_AREA_STYLE_COLOUR('',#546242); +#547132 = OVER_RIDING_STYLED_ITEM('overriding color',(#547133),#112486, + #546228); +#547133 = PRESENTATION_STYLE_ASSIGNMENT((#547134)); +#547134 = SURFACE_STYLE_USAGE(.BOTH.,#547135); +#547135 = SURFACE_SIDE_STYLE('',(#547136)); +#547136 = SURFACE_STYLE_FILL_AREA(#547137); +#547137 = FILL_AREA_STYLE('',(#547138)); +#547138 = FILL_AREA_STYLE_COLOUR('',#546242); +#547139 = OVER_RIDING_STYLED_ITEM('overriding color',(#547140),#112503, + #546228); +#547140 = PRESENTATION_STYLE_ASSIGNMENT((#547141)); +#547141 = SURFACE_STYLE_USAGE(.BOTH.,#547142); +#547142 = SURFACE_SIDE_STYLE('',(#547143)); +#547143 = SURFACE_STYLE_FILL_AREA(#547144); +#547144 = FILL_AREA_STYLE('',(#547145)); +#547145 = FILL_AREA_STYLE_COLOUR('',#546242); +#547146 = OVER_RIDING_STYLED_ITEM('overriding color',(#547147),#112520, + #546228); +#547147 = PRESENTATION_STYLE_ASSIGNMENT((#547148)); +#547148 = SURFACE_STYLE_USAGE(.BOTH.,#547149); +#547149 = SURFACE_SIDE_STYLE('',(#547150)); +#547150 = SURFACE_STYLE_FILL_AREA(#547151); +#547151 = FILL_AREA_STYLE('',(#547152)); +#547152 = FILL_AREA_STYLE_COLOUR('',#546242); +#547153 = OVER_RIDING_STYLED_ITEM('overriding color',(#547154),#112537, + #546228); +#547154 = PRESENTATION_STYLE_ASSIGNMENT((#547155)); +#547155 = SURFACE_STYLE_USAGE(.BOTH.,#547156); +#547156 = SURFACE_SIDE_STYLE('',(#547157)); +#547157 = SURFACE_STYLE_FILL_AREA(#547158); +#547158 = FILL_AREA_STYLE('',(#547159)); +#547159 = FILL_AREA_STYLE_COLOUR('',#546242); +#547160 = OVER_RIDING_STYLED_ITEM('overriding color',(#547161),#112554, + #546228); +#547161 = PRESENTATION_STYLE_ASSIGNMENT((#547162)); +#547162 = SURFACE_STYLE_USAGE(.BOTH.,#547163); +#547163 = SURFACE_SIDE_STYLE('',(#547164)); +#547164 = SURFACE_STYLE_FILL_AREA(#547165); +#547165 = FILL_AREA_STYLE('',(#547166)); +#547166 = FILL_AREA_STYLE_COLOUR('',#546242); +#547167 = OVER_RIDING_STYLED_ITEM('overriding color',(#547168),#112571, + #546228); +#547168 = PRESENTATION_STYLE_ASSIGNMENT((#547169)); +#547169 = SURFACE_STYLE_USAGE(.BOTH.,#547170); +#547170 = SURFACE_SIDE_STYLE('',(#547171)); +#547171 = SURFACE_STYLE_FILL_AREA(#547172); +#547172 = FILL_AREA_STYLE('',(#547173)); +#547173 = FILL_AREA_STYLE_COLOUR('',#546242); +#547174 = OVER_RIDING_STYLED_ITEM('overriding color',(#547175),#112588, + #546228); +#547175 = PRESENTATION_STYLE_ASSIGNMENT((#547176)); +#547176 = SURFACE_STYLE_USAGE(.BOTH.,#547177); +#547177 = SURFACE_SIDE_STYLE('',(#547178)); +#547178 = SURFACE_STYLE_FILL_AREA(#547179); +#547179 = FILL_AREA_STYLE('',(#547180)); +#547180 = FILL_AREA_STYLE_COLOUR('',#546242); +#547181 = OVER_RIDING_STYLED_ITEM('overriding color',(#547182),#112605, + #546228); +#547182 = PRESENTATION_STYLE_ASSIGNMENT((#547183)); +#547183 = SURFACE_STYLE_USAGE(.BOTH.,#547184); +#547184 = SURFACE_SIDE_STYLE('',(#547185)); +#547185 = SURFACE_STYLE_FILL_AREA(#547186); +#547186 = FILL_AREA_STYLE('',(#547187)); +#547187 = FILL_AREA_STYLE_COLOUR('',#546242); +#547188 = OVER_RIDING_STYLED_ITEM('overriding color',(#547189),#112622, + #546228); +#547189 = PRESENTATION_STYLE_ASSIGNMENT((#547190)); +#547190 = SURFACE_STYLE_USAGE(.BOTH.,#547191); +#547191 = SURFACE_SIDE_STYLE('',(#547192)); +#547192 = SURFACE_STYLE_FILL_AREA(#547193); +#547193 = FILL_AREA_STYLE('',(#547194)); +#547194 = FILL_AREA_STYLE_COLOUR('',#546242); +#547195 = OVER_RIDING_STYLED_ITEM('overriding color',(#547196),#112639, + #546228); +#547196 = PRESENTATION_STYLE_ASSIGNMENT((#547197)); +#547197 = SURFACE_STYLE_USAGE(.BOTH.,#547198); +#547198 = SURFACE_SIDE_STYLE('',(#547199)); +#547199 = SURFACE_STYLE_FILL_AREA(#547200); +#547200 = FILL_AREA_STYLE('',(#547201)); +#547201 = FILL_AREA_STYLE_COLOUR('',#546242); +#547202 = OVER_RIDING_STYLED_ITEM('overriding color',(#547203),#112656, + #546228); +#547203 = PRESENTATION_STYLE_ASSIGNMENT((#547204)); +#547204 = SURFACE_STYLE_USAGE(.BOTH.,#547205); +#547205 = SURFACE_SIDE_STYLE('',(#547206)); +#547206 = SURFACE_STYLE_FILL_AREA(#547207); +#547207 = FILL_AREA_STYLE('',(#547208)); +#547208 = FILL_AREA_STYLE_COLOUR('',#546242); +#547209 = OVER_RIDING_STYLED_ITEM('overriding color',(#547210),#112668, + #546228); +#547210 = PRESENTATION_STYLE_ASSIGNMENT((#547211)); +#547211 = SURFACE_STYLE_USAGE(.BOTH.,#547212); +#547212 = SURFACE_SIDE_STYLE('',(#547213)); +#547213 = SURFACE_STYLE_FILL_AREA(#547214); +#547214 = FILL_AREA_STYLE('',(#547215)); +#547215 = FILL_AREA_STYLE_COLOUR('',#546242); +#547216 = OVER_RIDING_STYLED_ITEM('overriding color',(#547217),#112690, + #546228); +#547217 = PRESENTATION_STYLE_ASSIGNMENT((#547218)); +#547218 = SURFACE_STYLE_USAGE(.BOTH.,#547219); +#547219 = SURFACE_SIDE_STYLE('',(#547220)); +#547220 = SURFACE_STYLE_FILL_AREA(#547221); +#547221 = FILL_AREA_STYLE('',(#547222)); +#547222 = FILL_AREA_STYLE_COLOUR('',#546242); +#547223 = OVER_RIDING_STYLED_ITEM('overriding color',(#547224),#112707, + #546228); +#547224 = PRESENTATION_STYLE_ASSIGNMENT((#547225)); +#547225 = SURFACE_STYLE_USAGE(.BOTH.,#547226); +#547226 = SURFACE_SIDE_STYLE('',(#547227)); +#547227 = SURFACE_STYLE_FILL_AREA(#547228); +#547228 = FILL_AREA_STYLE('',(#547229)); +#547229 = FILL_AREA_STYLE_COLOUR('',#546242); +#547230 = OVER_RIDING_STYLED_ITEM('overriding color',(#547231),#112724, + #546228); +#547231 = PRESENTATION_STYLE_ASSIGNMENT((#547232)); +#547232 = SURFACE_STYLE_USAGE(.BOTH.,#547233); +#547233 = SURFACE_SIDE_STYLE('',(#547234)); +#547234 = SURFACE_STYLE_FILL_AREA(#547235); +#547235 = FILL_AREA_STYLE('',(#547236)); +#547236 = FILL_AREA_STYLE_COLOUR('',#546242); +#547237 = OVER_RIDING_STYLED_ITEM('overriding color',(#547238),#112741, + #546228); +#547238 = PRESENTATION_STYLE_ASSIGNMENT((#547239)); +#547239 = SURFACE_STYLE_USAGE(.BOTH.,#547240); +#547240 = SURFACE_SIDE_STYLE('',(#547241)); +#547241 = SURFACE_STYLE_FILL_AREA(#547242); +#547242 = FILL_AREA_STYLE('',(#547243)); +#547243 = FILL_AREA_STYLE_COLOUR('',#546242); +#547244 = OVER_RIDING_STYLED_ITEM('overriding color',(#547245),#112758, + #546228); +#547245 = PRESENTATION_STYLE_ASSIGNMENT((#547246)); +#547246 = SURFACE_STYLE_USAGE(.BOTH.,#547247); +#547247 = SURFACE_SIDE_STYLE('',(#547248)); +#547248 = SURFACE_STYLE_FILL_AREA(#547249); +#547249 = FILL_AREA_STYLE('',(#547250)); +#547250 = FILL_AREA_STYLE_COLOUR('',#546242); +#547251 = OVER_RIDING_STYLED_ITEM('overriding color',(#547252),#112775, + #546228); +#547252 = PRESENTATION_STYLE_ASSIGNMENT((#547253)); +#547253 = SURFACE_STYLE_USAGE(.BOTH.,#547254); +#547254 = SURFACE_SIDE_STYLE('',(#547255)); +#547255 = SURFACE_STYLE_FILL_AREA(#547256); +#547256 = FILL_AREA_STYLE('',(#547257)); +#547257 = FILL_AREA_STYLE_COLOUR('',#546242); +#547258 = OVER_RIDING_STYLED_ITEM('overriding color',(#547259),#112792, + #546228); +#547259 = PRESENTATION_STYLE_ASSIGNMENT((#547260)); +#547260 = SURFACE_STYLE_USAGE(.BOTH.,#547261); +#547261 = SURFACE_SIDE_STYLE('',(#547262)); +#547262 = SURFACE_STYLE_FILL_AREA(#547263); +#547263 = FILL_AREA_STYLE('',(#547264)); +#547264 = FILL_AREA_STYLE_COLOUR('',#546242); +#547265 = OVER_RIDING_STYLED_ITEM('overriding color',(#547266),#112809, + #546228); +#547266 = PRESENTATION_STYLE_ASSIGNMENT((#547267)); +#547267 = SURFACE_STYLE_USAGE(.BOTH.,#547268); +#547268 = SURFACE_SIDE_STYLE('',(#547269)); +#547269 = SURFACE_STYLE_FILL_AREA(#547270); +#547270 = FILL_AREA_STYLE('',(#547271)); +#547271 = FILL_AREA_STYLE_COLOUR('',#546242); +#547272 = OVER_RIDING_STYLED_ITEM('overriding color',(#547273),#112826, + #546228); +#547273 = PRESENTATION_STYLE_ASSIGNMENT((#547274)); +#547274 = SURFACE_STYLE_USAGE(.BOTH.,#547275); +#547275 = SURFACE_SIDE_STYLE('',(#547276)); +#547276 = SURFACE_STYLE_FILL_AREA(#547277); +#547277 = FILL_AREA_STYLE('',(#547278)); +#547278 = FILL_AREA_STYLE_COLOUR('',#546242); +#547279 = OVER_RIDING_STYLED_ITEM('overriding color',(#547280),#112843, + #546228); +#547280 = PRESENTATION_STYLE_ASSIGNMENT((#547281)); +#547281 = SURFACE_STYLE_USAGE(.BOTH.,#547282); +#547282 = SURFACE_SIDE_STYLE('',(#547283)); +#547283 = SURFACE_STYLE_FILL_AREA(#547284); +#547284 = FILL_AREA_STYLE('',(#547285)); +#547285 = FILL_AREA_STYLE_COLOUR('',#546242); +#547286 = OVER_RIDING_STYLED_ITEM('overriding color',(#547287),#112860, + #546228); +#547287 = PRESENTATION_STYLE_ASSIGNMENT((#547288)); +#547288 = SURFACE_STYLE_USAGE(.BOTH.,#547289); +#547289 = SURFACE_SIDE_STYLE('',(#547290)); +#547290 = SURFACE_STYLE_FILL_AREA(#547291); +#547291 = FILL_AREA_STYLE('',(#547292)); +#547292 = FILL_AREA_STYLE_COLOUR('',#546242); +#547293 = OVER_RIDING_STYLED_ITEM('overriding color',(#547294),#112877, + #546228); +#547294 = PRESENTATION_STYLE_ASSIGNMENT((#547295)); +#547295 = SURFACE_STYLE_USAGE(.BOTH.,#547296); +#547296 = SURFACE_SIDE_STYLE('',(#547297)); +#547297 = SURFACE_STYLE_FILL_AREA(#547298); +#547298 = FILL_AREA_STYLE('',(#547299)); +#547299 = FILL_AREA_STYLE_COLOUR('',#546242); +#547300 = OVER_RIDING_STYLED_ITEM('overriding color',(#547301),#112894, + #546228); +#547301 = PRESENTATION_STYLE_ASSIGNMENT((#547302)); +#547302 = SURFACE_STYLE_USAGE(.BOTH.,#547303); +#547303 = SURFACE_SIDE_STYLE('',(#547304)); +#547304 = SURFACE_STYLE_FILL_AREA(#547305); +#547305 = FILL_AREA_STYLE('',(#547306)); +#547306 = FILL_AREA_STYLE_COLOUR('',#546242); +#547307 = OVER_RIDING_STYLED_ITEM('overriding color',(#547308),#112911, + #546228); +#547308 = PRESENTATION_STYLE_ASSIGNMENT((#547309)); +#547309 = SURFACE_STYLE_USAGE(.BOTH.,#547310); +#547310 = SURFACE_SIDE_STYLE('',(#547311)); +#547311 = SURFACE_STYLE_FILL_AREA(#547312); +#547312 = FILL_AREA_STYLE('',(#547313)); +#547313 = FILL_AREA_STYLE_COLOUR('',#546242); +#547314 = OVER_RIDING_STYLED_ITEM('overriding color',(#547315),#112928, + #546228); +#547315 = PRESENTATION_STYLE_ASSIGNMENT((#547316)); +#547316 = SURFACE_STYLE_USAGE(.BOTH.,#547317); +#547317 = SURFACE_SIDE_STYLE('',(#547318)); +#547318 = SURFACE_STYLE_FILL_AREA(#547319); +#547319 = FILL_AREA_STYLE('',(#547320)); +#547320 = FILL_AREA_STYLE_COLOUR('',#546242); +#547321 = OVER_RIDING_STYLED_ITEM('overriding color',(#547322),#112945, + #546228); +#547322 = PRESENTATION_STYLE_ASSIGNMENT((#547323)); +#547323 = SURFACE_STYLE_USAGE(.BOTH.,#547324); +#547324 = SURFACE_SIDE_STYLE('',(#547325)); +#547325 = SURFACE_STYLE_FILL_AREA(#547326); +#547326 = FILL_AREA_STYLE('',(#547327)); +#547327 = FILL_AREA_STYLE_COLOUR('',#546242); +#547328 = OVER_RIDING_STYLED_ITEM('overriding color',(#547329),#112962, + #546228); +#547329 = PRESENTATION_STYLE_ASSIGNMENT((#547330)); +#547330 = SURFACE_STYLE_USAGE(.BOTH.,#547331); +#547331 = SURFACE_SIDE_STYLE('',(#547332)); +#547332 = SURFACE_STYLE_FILL_AREA(#547333); +#547333 = FILL_AREA_STYLE('',(#547334)); +#547334 = FILL_AREA_STYLE_COLOUR('',#546242); +#547335 = OVER_RIDING_STYLED_ITEM('overriding color',(#547336),#112979, + #546228); +#547336 = PRESENTATION_STYLE_ASSIGNMENT((#547337)); +#547337 = SURFACE_STYLE_USAGE(.BOTH.,#547338); +#547338 = SURFACE_SIDE_STYLE('',(#547339)); +#547339 = SURFACE_STYLE_FILL_AREA(#547340); +#547340 = FILL_AREA_STYLE('',(#547341)); +#547341 = FILL_AREA_STYLE_COLOUR('',#546242); +#547342 = OVER_RIDING_STYLED_ITEM('overriding color',(#547343),#112996, + #546228); +#547343 = PRESENTATION_STYLE_ASSIGNMENT((#547344)); +#547344 = SURFACE_STYLE_USAGE(.BOTH.,#547345); +#547345 = SURFACE_SIDE_STYLE('',(#547346)); +#547346 = SURFACE_STYLE_FILL_AREA(#547347); +#547347 = FILL_AREA_STYLE('',(#547348)); +#547348 = FILL_AREA_STYLE_COLOUR('',#546242); +#547349 = OVER_RIDING_STYLED_ITEM('overriding color',(#547350),#113013, + #546228); +#547350 = PRESENTATION_STYLE_ASSIGNMENT((#547351)); +#547351 = SURFACE_STYLE_USAGE(.BOTH.,#547352); +#547352 = SURFACE_SIDE_STYLE('',(#547353)); +#547353 = SURFACE_STYLE_FILL_AREA(#547354); +#547354 = FILL_AREA_STYLE('',(#547355)); +#547355 = FILL_AREA_STYLE_COLOUR('',#546242); +#547356 = OVER_RIDING_STYLED_ITEM('overriding color',(#547357),#113030, + #546228); +#547357 = PRESENTATION_STYLE_ASSIGNMENT((#547358)); +#547358 = SURFACE_STYLE_USAGE(.BOTH.,#547359); +#547359 = SURFACE_SIDE_STYLE('',(#547360)); +#547360 = SURFACE_STYLE_FILL_AREA(#547361); +#547361 = FILL_AREA_STYLE('',(#547362)); +#547362 = FILL_AREA_STYLE_COLOUR('',#546242); +#547363 = OVER_RIDING_STYLED_ITEM('overriding color',(#547364),#113047, + #546228); +#547364 = PRESENTATION_STYLE_ASSIGNMENT((#547365)); +#547365 = SURFACE_STYLE_USAGE(.BOTH.,#547366); +#547366 = SURFACE_SIDE_STYLE('',(#547367)); +#547367 = SURFACE_STYLE_FILL_AREA(#547368); +#547368 = FILL_AREA_STYLE('',(#547369)); +#547369 = FILL_AREA_STYLE_COLOUR('',#546242); +#547370 = OVER_RIDING_STYLED_ITEM('overriding color',(#547371),#113064, + #546228); +#547371 = PRESENTATION_STYLE_ASSIGNMENT((#547372)); +#547372 = SURFACE_STYLE_USAGE(.BOTH.,#547373); +#547373 = SURFACE_SIDE_STYLE('',(#547374)); +#547374 = SURFACE_STYLE_FILL_AREA(#547375); +#547375 = FILL_AREA_STYLE('',(#547376)); +#547376 = FILL_AREA_STYLE_COLOUR('',#546242); +#547377 = OVER_RIDING_STYLED_ITEM('overriding color',(#547378),#113081, + #546228); +#547378 = PRESENTATION_STYLE_ASSIGNMENT((#547379)); +#547379 = SURFACE_STYLE_USAGE(.BOTH.,#547380); +#547380 = SURFACE_SIDE_STYLE('',(#547381)); +#547381 = SURFACE_STYLE_FILL_AREA(#547382); +#547382 = FILL_AREA_STYLE('',(#547383)); +#547383 = FILL_AREA_STYLE_COLOUR('',#546242); +#547384 = OVER_RIDING_STYLED_ITEM('overriding color',(#547385),#113098, + #546228); +#547385 = PRESENTATION_STYLE_ASSIGNMENT((#547386)); +#547386 = SURFACE_STYLE_USAGE(.BOTH.,#547387); +#547387 = SURFACE_SIDE_STYLE('',(#547388)); +#547388 = SURFACE_STYLE_FILL_AREA(#547389); +#547389 = FILL_AREA_STYLE('',(#547390)); +#547390 = FILL_AREA_STYLE_COLOUR('',#546242); +#547391 = OVER_RIDING_STYLED_ITEM('overriding color',(#547392),#113115, + #546228); +#547392 = PRESENTATION_STYLE_ASSIGNMENT((#547393)); +#547393 = SURFACE_STYLE_USAGE(.BOTH.,#547394); +#547394 = SURFACE_SIDE_STYLE('',(#547395)); +#547395 = SURFACE_STYLE_FILL_AREA(#547396); +#547396 = FILL_AREA_STYLE('',(#547397)); +#547397 = FILL_AREA_STYLE_COLOUR('',#546242); +#547398 = OVER_RIDING_STYLED_ITEM('overriding color',(#547399),#113132, + #546228); +#547399 = PRESENTATION_STYLE_ASSIGNMENT((#547400)); +#547400 = SURFACE_STYLE_USAGE(.BOTH.,#547401); +#547401 = SURFACE_SIDE_STYLE('',(#547402)); +#547402 = SURFACE_STYLE_FILL_AREA(#547403); +#547403 = FILL_AREA_STYLE('',(#547404)); +#547404 = FILL_AREA_STYLE_COLOUR('',#546242); +#547405 = OVER_RIDING_STYLED_ITEM('overriding color',(#547406),#113149, + #546228); +#547406 = PRESENTATION_STYLE_ASSIGNMENT((#547407)); +#547407 = SURFACE_STYLE_USAGE(.BOTH.,#547408); +#547408 = SURFACE_SIDE_STYLE('',(#547409)); +#547409 = SURFACE_STYLE_FILL_AREA(#547410); +#547410 = FILL_AREA_STYLE('',(#547411)); +#547411 = FILL_AREA_STYLE_COLOUR('',#546242); +#547412 = OVER_RIDING_STYLED_ITEM('overriding color',(#547413),#113166, + #546228); +#547413 = PRESENTATION_STYLE_ASSIGNMENT((#547414)); +#547414 = SURFACE_STYLE_USAGE(.BOTH.,#547415); +#547415 = SURFACE_SIDE_STYLE('',(#547416)); +#547416 = SURFACE_STYLE_FILL_AREA(#547417); +#547417 = FILL_AREA_STYLE('',(#547418)); +#547418 = FILL_AREA_STYLE_COLOUR('',#546242); +#547419 = OVER_RIDING_STYLED_ITEM('overriding color',(#547420),#113183, + #546228); +#547420 = PRESENTATION_STYLE_ASSIGNMENT((#547421)); +#547421 = SURFACE_STYLE_USAGE(.BOTH.,#547422); +#547422 = SURFACE_SIDE_STYLE('',(#547423)); +#547423 = SURFACE_STYLE_FILL_AREA(#547424); +#547424 = FILL_AREA_STYLE('',(#547425)); +#547425 = FILL_AREA_STYLE_COLOUR('',#546242); +#547426 = OVER_RIDING_STYLED_ITEM('overriding color',(#547427),#113200, + #546228); +#547427 = PRESENTATION_STYLE_ASSIGNMENT((#547428)); +#547428 = SURFACE_STYLE_USAGE(.BOTH.,#547429); +#547429 = SURFACE_SIDE_STYLE('',(#547430)); +#547430 = SURFACE_STYLE_FILL_AREA(#547431); +#547431 = FILL_AREA_STYLE('',(#547432)); +#547432 = FILL_AREA_STYLE_COLOUR('',#546242); +#547433 = OVER_RIDING_STYLED_ITEM('overriding color',(#547434),#113217, + #546228); +#547434 = PRESENTATION_STYLE_ASSIGNMENT((#547435)); +#547435 = SURFACE_STYLE_USAGE(.BOTH.,#547436); +#547436 = SURFACE_SIDE_STYLE('',(#547437)); +#547437 = SURFACE_STYLE_FILL_AREA(#547438); +#547438 = FILL_AREA_STYLE('',(#547439)); +#547439 = FILL_AREA_STYLE_COLOUR('',#546242); +#547440 = OVER_RIDING_STYLED_ITEM('overriding color',(#547441),#113234, + #546228); +#547441 = PRESENTATION_STYLE_ASSIGNMENT((#547442)); +#547442 = SURFACE_STYLE_USAGE(.BOTH.,#547443); +#547443 = SURFACE_SIDE_STYLE('',(#547444)); +#547444 = SURFACE_STYLE_FILL_AREA(#547445); +#547445 = FILL_AREA_STYLE('',(#547446)); +#547446 = FILL_AREA_STYLE_COLOUR('',#546242); +#547447 = OVER_RIDING_STYLED_ITEM('overriding color',(#547448),#113251, + #546228); +#547448 = PRESENTATION_STYLE_ASSIGNMENT((#547449)); +#547449 = SURFACE_STYLE_USAGE(.BOTH.,#547450); +#547450 = SURFACE_SIDE_STYLE('',(#547451)); +#547451 = SURFACE_STYLE_FILL_AREA(#547452); +#547452 = FILL_AREA_STYLE('',(#547453)); +#547453 = FILL_AREA_STYLE_COLOUR('',#546242); +#547454 = OVER_RIDING_STYLED_ITEM('overriding color',(#547455),#113268, + #546228); +#547455 = PRESENTATION_STYLE_ASSIGNMENT((#547456)); +#547456 = SURFACE_STYLE_USAGE(.BOTH.,#547457); +#547457 = SURFACE_SIDE_STYLE('',(#547458)); +#547458 = SURFACE_STYLE_FILL_AREA(#547459); +#547459 = FILL_AREA_STYLE('',(#547460)); +#547460 = FILL_AREA_STYLE_COLOUR('',#546242); +#547461 = OVER_RIDING_STYLED_ITEM('overriding color',(#547462),#113285, + #546228); +#547462 = PRESENTATION_STYLE_ASSIGNMENT((#547463)); +#547463 = SURFACE_STYLE_USAGE(.BOTH.,#547464); +#547464 = SURFACE_SIDE_STYLE('',(#547465)); +#547465 = SURFACE_STYLE_FILL_AREA(#547466); +#547466 = FILL_AREA_STYLE('',(#547467)); +#547467 = FILL_AREA_STYLE_COLOUR('',#546242); +#547468 = OVER_RIDING_STYLED_ITEM('overriding color',(#547469),#113302, + #546228); +#547469 = PRESENTATION_STYLE_ASSIGNMENT((#547470)); +#547470 = SURFACE_STYLE_USAGE(.BOTH.,#547471); +#547471 = SURFACE_SIDE_STYLE('',(#547472)); +#547472 = SURFACE_STYLE_FILL_AREA(#547473); +#547473 = FILL_AREA_STYLE('',(#547474)); +#547474 = FILL_AREA_STYLE_COLOUR('',#546242); +#547475 = OVER_RIDING_STYLED_ITEM('overriding color',(#547476),#113319, + #546228); +#547476 = PRESENTATION_STYLE_ASSIGNMENT((#547477)); +#547477 = SURFACE_STYLE_USAGE(.BOTH.,#547478); +#547478 = SURFACE_SIDE_STYLE('',(#547479)); +#547479 = SURFACE_STYLE_FILL_AREA(#547480); +#547480 = FILL_AREA_STYLE('',(#547481)); +#547481 = FILL_AREA_STYLE_COLOUR('',#546242); +#547482 = OVER_RIDING_STYLED_ITEM('overriding color',(#547483),#113336, + #546228); +#547483 = PRESENTATION_STYLE_ASSIGNMENT((#547484)); +#547484 = SURFACE_STYLE_USAGE(.BOTH.,#547485); +#547485 = SURFACE_SIDE_STYLE('',(#547486)); +#547486 = SURFACE_STYLE_FILL_AREA(#547487); +#547487 = FILL_AREA_STYLE('',(#547488)); +#547488 = FILL_AREA_STYLE_COLOUR('',#546242); +#547489 = OVER_RIDING_STYLED_ITEM('overriding color',(#547490),#113353, + #546228); +#547490 = PRESENTATION_STYLE_ASSIGNMENT((#547491)); +#547491 = SURFACE_STYLE_USAGE(.BOTH.,#547492); +#547492 = SURFACE_SIDE_STYLE('',(#547493)); +#547493 = SURFACE_STYLE_FILL_AREA(#547494); +#547494 = FILL_AREA_STYLE('',(#547495)); +#547495 = FILL_AREA_STYLE_COLOUR('',#546242); +#547496 = OVER_RIDING_STYLED_ITEM('overriding color',(#547497),#113370, + #546228); +#547497 = PRESENTATION_STYLE_ASSIGNMENT((#547498)); +#547498 = SURFACE_STYLE_USAGE(.BOTH.,#547499); +#547499 = SURFACE_SIDE_STYLE('',(#547500)); +#547500 = SURFACE_STYLE_FILL_AREA(#547501); +#547501 = FILL_AREA_STYLE('',(#547502)); +#547502 = FILL_AREA_STYLE_COLOUR('',#546242); +#547503 = OVER_RIDING_STYLED_ITEM('overriding color',(#547504),#113387, + #546228); +#547504 = PRESENTATION_STYLE_ASSIGNMENT((#547505)); +#547505 = SURFACE_STYLE_USAGE(.BOTH.,#547506); +#547506 = SURFACE_SIDE_STYLE('',(#547507)); +#547507 = SURFACE_STYLE_FILL_AREA(#547508); +#547508 = FILL_AREA_STYLE('',(#547509)); +#547509 = FILL_AREA_STYLE_COLOUR('',#546242); +#547510 = OVER_RIDING_STYLED_ITEM('overriding color',(#547511),#113404, + #546228); +#547511 = PRESENTATION_STYLE_ASSIGNMENT((#547512)); +#547512 = SURFACE_STYLE_USAGE(.BOTH.,#547513); +#547513 = SURFACE_SIDE_STYLE('',(#547514)); +#547514 = SURFACE_STYLE_FILL_AREA(#547515); +#547515 = FILL_AREA_STYLE('',(#547516)); +#547516 = FILL_AREA_STYLE_COLOUR('',#546242); +#547517 = OVER_RIDING_STYLED_ITEM('overriding color',(#547518),#113421, + #546228); +#547518 = PRESENTATION_STYLE_ASSIGNMENT((#547519)); +#547519 = SURFACE_STYLE_USAGE(.BOTH.,#547520); +#547520 = SURFACE_SIDE_STYLE('',(#547521)); +#547521 = SURFACE_STYLE_FILL_AREA(#547522); +#547522 = FILL_AREA_STYLE('',(#547523)); +#547523 = FILL_AREA_STYLE_COLOUR('',#546242); +#547524 = OVER_RIDING_STYLED_ITEM('overriding color',(#547525),#113438, + #546228); +#547525 = PRESENTATION_STYLE_ASSIGNMENT((#547526)); +#547526 = SURFACE_STYLE_USAGE(.BOTH.,#547527); +#547527 = SURFACE_SIDE_STYLE('',(#547528)); +#547528 = SURFACE_STYLE_FILL_AREA(#547529); +#547529 = FILL_AREA_STYLE('',(#547530)); +#547530 = FILL_AREA_STYLE_COLOUR('',#546242); +#547531 = OVER_RIDING_STYLED_ITEM('overriding color',(#547532),#113455, + #546228); +#547532 = PRESENTATION_STYLE_ASSIGNMENT((#547533)); +#547533 = SURFACE_STYLE_USAGE(.BOTH.,#547534); +#547534 = SURFACE_SIDE_STYLE('',(#547535)); +#547535 = SURFACE_STYLE_FILL_AREA(#547536); +#547536 = FILL_AREA_STYLE('',(#547537)); +#547537 = FILL_AREA_STYLE_COLOUR('',#546242); +#547538 = OVER_RIDING_STYLED_ITEM('overriding color',(#547539),#113472, + #546228); +#547539 = PRESENTATION_STYLE_ASSIGNMENT((#547540)); +#547540 = SURFACE_STYLE_USAGE(.BOTH.,#547541); +#547541 = SURFACE_SIDE_STYLE('',(#547542)); +#547542 = SURFACE_STYLE_FILL_AREA(#547543); +#547543 = FILL_AREA_STYLE('',(#547544)); +#547544 = FILL_AREA_STYLE_COLOUR('',#546242); +#547545 = OVER_RIDING_STYLED_ITEM('overriding color',(#547546),#113489, + #546228); +#547546 = PRESENTATION_STYLE_ASSIGNMENT((#547547)); +#547547 = SURFACE_STYLE_USAGE(.BOTH.,#547548); +#547548 = SURFACE_SIDE_STYLE('',(#547549)); +#547549 = SURFACE_STYLE_FILL_AREA(#547550); +#547550 = FILL_AREA_STYLE('',(#547551)); +#547551 = FILL_AREA_STYLE_COLOUR('',#546242); +#547552 = OVER_RIDING_STYLED_ITEM('overriding color',(#547553),#113506, + #546228); +#547553 = PRESENTATION_STYLE_ASSIGNMENT((#547554)); +#547554 = SURFACE_STYLE_USAGE(.BOTH.,#547555); +#547555 = SURFACE_SIDE_STYLE('',(#547556)); +#547556 = SURFACE_STYLE_FILL_AREA(#547557); +#547557 = FILL_AREA_STYLE('',(#547558)); +#547558 = FILL_AREA_STYLE_COLOUR('',#546242); +#547559 = OVER_RIDING_STYLED_ITEM('overriding color',(#547560),#113523, + #546228); +#547560 = PRESENTATION_STYLE_ASSIGNMENT((#547561)); +#547561 = SURFACE_STYLE_USAGE(.BOTH.,#547562); +#547562 = SURFACE_SIDE_STYLE('',(#547563)); +#547563 = SURFACE_STYLE_FILL_AREA(#547564); +#547564 = FILL_AREA_STYLE('',(#547565)); +#547565 = FILL_AREA_STYLE_COLOUR('',#546242); +#547566 = OVER_RIDING_STYLED_ITEM('overriding color',(#547567),#113540, + #546228); +#547567 = PRESENTATION_STYLE_ASSIGNMENT((#547568)); +#547568 = SURFACE_STYLE_USAGE(.BOTH.,#547569); +#547569 = SURFACE_SIDE_STYLE('',(#547570)); +#547570 = SURFACE_STYLE_FILL_AREA(#547571); +#547571 = FILL_AREA_STYLE('',(#547572)); +#547572 = FILL_AREA_STYLE_COLOUR('',#546242); +#547573 = OVER_RIDING_STYLED_ITEM('overriding color',(#547574),#113557, + #546228); +#547574 = PRESENTATION_STYLE_ASSIGNMENT((#547575)); +#547575 = SURFACE_STYLE_USAGE(.BOTH.,#547576); +#547576 = SURFACE_SIDE_STYLE('',(#547577)); +#547577 = SURFACE_STYLE_FILL_AREA(#547578); +#547578 = FILL_AREA_STYLE('',(#547579)); +#547579 = FILL_AREA_STYLE_COLOUR('',#546242); +#547580 = OVER_RIDING_STYLED_ITEM('overriding color',(#547581),#113574, + #546228); +#547581 = PRESENTATION_STYLE_ASSIGNMENT((#547582)); +#547582 = SURFACE_STYLE_USAGE(.BOTH.,#547583); +#547583 = SURFACE_SIDE_STYLE('',(#547584)); +#547584 = SURFACE_STYLE_FILL_AREA(#547585); +#547585 = FILL_AREA_STYLE('',(#547586)); +#547586 = FILL_AREA_STYLE_COLOUR('',#546242); +#547587 = OVER_RIDING_STYLED_ITEM('overriding color',(#547588),#113591, + #546228); +#547588 = PRESENTATION_STYLE_ASSIGNMENT((#547589)); +#547589 = SURFACE_STYLE_USAGE(.BOTH.,#547590); +#547590 = SURFACE_SIDE_STYLE('',(#547591)); +#547591 = SURFACE_STYLE_FILL_AREA(#547592); +#547592 = FILL_AREA_STYLE('',(#547593)); +#547593 = FILL_AREA_STYLE_COLOUR('',#546242); +#547594 = OVER_RIDING_STYLED_ITEM('overriding color',(#547595),#113608, + #546228); +#547595 = PRESENTATION_STYLE_ASSIGNMENT((#547596)); +#547596 = SURFACE_STYLE_USAGE(.BOTH.,#547597); +#547597 = SURFACE_SIDE_STYLE('',(#547598)); +#547598 = SURFACE_STYLE_FILL_AREA(#547599); +#547599 = FILL_AREA_STYLE('',(#547600)); +#547600 = FILL_AREA_STYLE_COLOUR('',#546242); +#547601 = OVER_RIDING_STYLED_ITEM('overriding color',(#547602),#113625, + #546228); +#547602 = PRESENTATION_STYLE_ASSIGNMENT((#547603)); +#547603 = SURFACE_STYLE_USAGE(.BOTH.,#547604); +#547604 = SURFACE_SIDE_STYLE('',(#547605)); +#547605 = SURFACE_STYLE_FILL_AREA(#547606); +#547606 = FILL_AREA_STYLE('',(#547607)); +#547607 = FILL_AREA_STYLE_COLOUR('',#546242); +#547608 = OVER_RIDING_STYLED_ITEM('overriding color',(#547609),#113637, + #546228); +#547609 = PRESENTATION_STYLE_ASSIGNMENT((#547610)); +#547610 = SURFACE_STYLE_USAGE(.BOTH.,#547611); +#547611 = SURFACE_SIDE_STYLE('',(#547612)); +#547612 = SURFACE_STYLE_FILL_AREA(#547613); +#547613 = FILL_AREA_STYLE('',(#547614)); +#547614 = FILL_AREA_STYLE_COLOUR('',#546242); +#547615 = OVER_RIDING_STYLED_ITEM('overriding color',(#547616),#113659, + #546228); +#547616 = PRESENTATION_STYLE_ASSIGNMENT((#547617)); +#547617 = SURFACE_STYLE_USAGE(.BOTH.,#547618); +#547618 = SURFACE_SIDE_STYLE('',(#547619)); +#547619 = SURFACE_STYLE_FILL_AREA(#547620); +#547620 = FILL_AREA_STYLE('',(#547621)); +#547621 = FILL_AREA_STYLE_COLOUR('',#546242); +#547622 = OVER_RIDING_STYLED_ITEM('overriding color',(#547623),#113676, + #546228); +#547623 = PRESENTATION_STYLE_ASSIGNMENT((#547624)); +#547624 = SURFACE_STYLE_USAGE(.BOTH.,#547625); +#547625 = SURFACE_SIDE_STYLE('',(#547626)); +#547626 = SURFACE_STYLE_FILL_AREA(#547627); +#547627 = FILL_AREA_STYLE('',(#547628)); +#547628 = FILL_AREA_STYLE_COLOUR('',#546242); +#547629 = OVER_RIDING_STYLED_ITEM('overriding color',(#547630),#113693, + #546228); +#547630 = PRESENTATION_STYLE_ASSIGNMENT((#547631)); +#547631 = SURFACE_STYLE_USAGE(.BOTH.,#547632); +#547632 = SURFACE_SIDE_STYLE('',(#547633)); +#547633 = SURFACE_STYLE_FILL_AREA(#547634); +#547634 = FILL_AREA_STYLE('',(#547635)); +#547635 = FILL_AREA_STYLE_COLOUR('',#546242); +#547636 = OVER_RIDING_STYLED_ITEM('overriding color',(#547637),#113710, + #546228); +#547637 = PRESENTATION_STYLE_ASSIGNMENT((#547638)); +#547638 = SURFACE_STYLE_USAGE(.BOTH.,#547639); +#547639 = SURFACE_SIDE_STYLE('',(#547640)); +#547640 = SURFACE_STYLE_FILL_AREA(#547641); +#547641 = FILL_AREA_STYLE('',(#547642)); +#547642 = FILL_AREA_STYLE_COLOUR('',#546242); +#547643 = OVER_RIDING_STYLED_ITEM('overriding color',(#547644),#113727, + #546228); +#547644 = PRESENTATION_STYLE_ASSIGNMENT((#547645)); +#547645 = SURFACE_STYLE_USAGE(.BOTH.,#547646); +#547646 = SURFACE_SIDE_STYLE('',(#547647)); +#547647 = SURFACE_STYLE_FILL_AREA(#547648); +#547648 = FILL_AREA_STYLE('',(#547649)); +#547649 = FILL_AREA_STYLE_COLOUR('',#546242); +#547650 = OVER_RIDING_STYLED_ITEM('overriding color',(#547651),#113744, + #546228); +#547651 = PRESENTATION_STYLE_ASSIGNMENT((#547652)); +#547652 = SURFACE_STYLE_USAGE(.BOTH.,#547653); +#547653 = SURFACE_SIDE_STYLE('',(#547654)); +#547654 = SURFACE_STYLE_FILL_AREA(#547655); +#547655 = FILL_AREA_STYLE('',(#547656)); +#547656 = FILL_AREA_STYLE_COLOUR('',#546242); +#547657 = OVER_RIDING_STYLED_ITEM('overriding color',(#547658),#113761, + #546228); +#547658 = PRESENTATION_STYLE_ASSIGNMENT((#547659)); +#547659 = SURFACE_STYLE_USAGE(.BOTH.,#547660); +#547660 = SURFACE_SIDE_STYLE('',(#547661)); +#547661 = SURFACE_STYLE_FILL_AREA(#547662); +#547662 = FILL_AREA_STYLE('',(#547663)); +#547663 = FILL_AREA_STYLE_COLOUR('',#546242); +#547664 = OVER_RIDING_STYLED_ITEM('overriding color',(#547665),#113778, + #546228); +#547665 = PRESENTATION_STYLE_ASSIGNMENT((#547666)); +#547666 = SURFACE_STYLE_USAGE(.BOTH.,#547667); +#547667 = SURFACE_SIDE_STYLE('',(#547668)); +#547668 = SURFACE_STYLE_FILL_AREA(#547669); +#547669 = FILL_AREA_STYLE('',(#547670)); +#547670 = FILL_AREA_STYLE_COLOUR('',#546242); +#547671 = OVER_RIDING_STYLED_ITEM('overriding color',(#547672),#113795, + #546228); +#547672 = PRESENTATION_STYLE_ASSIGNMENT((#547673)); +#547673 = SURFACE_STYLE_USAGE(.BOTH.,#547674); +#547674 = SURFACE_SIDE_STYLE('',(#547675)); +#547675 = SURFACE_STYLE_FILL_AREA(#547676); +#547676 = FILL_AREA_STYLE('',(#547677)); +#547677 = FILL_AREA_STYLE_COLOUR('',#546242); +#547678 = OVER_RIDING_STYLED_ITEM('overriding color',(#547679),#113812, + #546228); +#547679 = PRESENTATION_STYLE_ASSIGNMENT((#547680)); +#547680 = SURFACE_STYLE_USAGE(.BOTH.,#547681); +#547681 = SURFACE_SIDE_STYLE('',(#547682)); +#547682 = SURFACE_STYLE_FILL_AREA(#547683); +#547683 = FILL_AREA_STYLE('',(#547684)); +#547684 = FILL_AREA_STYLE_COLOUR('',#546242); +#547685 = OVER_RIDING_STYLED_ITEM('overriding color',(#547686),#113829, + #546228); +#547686 = PRESENTATION_STYLE_ASSIGNMENT((#547687)); +#547687 = SURFACE_STYLE_USAGE(.BOTH.,#547688); +#547688 = SURFACE_SIDE_STYLE('',(#547689)); +#547689 = SURFACE_STYLE_FILL_AREA(#547690); +#547690 = FILL_AREA_STYLE('',(#547691)); +#547691 = FILL_AREA_STYLE_COLOUR('',#546242); +#547692 = OVER_RIDING_STYLED_ITEM('overriding color',(#547693),#113846, + #546228); +#547693 = PRESENTATION_STYLE_ASSIGNMENT((#547694)); +#547694 = SURFACE_STYLE_USAGE(.BOTH.,#547695); +#547695 = SURFACE_SIDE_STYLE('',(#547696)); +#547696 = SURFACE_STYLE_FILL_AREA(#547697); +#547697 = FILL_AREA_STYLE('',(#547698)); +#547698 = FILL_AREA_STYLE_COLOUR('',#546242); +#547699 = OVER_RIDING_STYLED_ITEM('overriding color',(#547700),#113863, + #546228); +#547700 = PRESENTATION_STYLE_ASSIGNMENT((#547701)); +#547701 = SURFACE_STYLE_USAGE(.BOTH.,#547702); +#547702 = SURFACE_SIDE_STYLE('',(#547703)); +#547703 = SURFACE_STYLE_FILL_AREA(#547704); +#547704 = FILL_AREA_STYLE('',(#547705)); +#547705 = FILL_AREA_STYLE_COLOUR('',#546242); +#547706 = OVER_RIDING_STYLED_ITEM('overriding color',(#547707),#113880, + #546228); +#547707 = PRESENTATION_STYLE_ASSIGNMENT((#547708)); +#547708 = SURFACE_STYLE_USAGE(.BOTH.,#547709); +#547709 = SURFACE_SIDE_STYLE('',(#547710)); +#547710 = SURFACE_STYLE_FILL_AREA(#547711); +#547711 = FILL_AREA_STYLE('',(#547712)); +#547712 = FILL_AREA_STYLE_COLOUR('',#546242); +#547713 = OVER_RIDING_STYLED_ITEM('overriding color',(#547714),#113897, + #546228); +#547714 = PRESENTATION_STYLE_ASSIGNMENT((#547715)); +#547715 = SURFACE_STYLE_USAGE(.BOTH.,#547716); +#547716 = SURFACE_SIDE_STYLE('',(#547717)); +#547717 = SURFACE_STYLE_FILL_AREA(#547718); +#547718 = FILL_AREA_STYLE('',(#547719)); +#547719 = FILL_AREA_STYLE_COLOUR('',#546242); +#547720 = OVER_RIDING_STYLED_ITEM('overriding color',(#547721),#113914, + #546228); +#547721 = PRESENTATION_STYLE_ASSIGNMENT((#547722)); +#547722 = SURFACE_STYLE_USAGE(.BOTH.,#547723); +#547723 = SURFACE_SIDE_STYLE('',(#547724)); +#547724 = SURFACE_STYLE_FILL_AREA(#547725); +#547725 = FILL_AREA_STYLE('',(#547726)); +#547726 = FILL_AREA_STYLE_COLOUR('',#546242); +#547727 = OVER_RIDING_STYLED_ITEM('overriding color',(#547728),#113931, + #546228); +#547728 = PRESENTATION_STYLE_ASSIGNMENT((#547729)); +#547729 = SURFACE_STYLE_USAGE(.BOTH.,#547730); +#547730 = SURFACE_SIDE_STYLE('',(#547731)); +#547731 = SURFACE_STYLE_FILL_AREA(#547732); +#547732 = FILL_AREA_STYLE('',(#547733)); +#547733 = FILL_AREA_STYLE_COLOUR('',#546242); +#547734 = OVER_RIDING_STYLED_ITEM('overriding color',(#547735),#113948, + #546228); +#547735 = PRESENTATION_STYLE_ASSIGNMENT((#547736)); +#547736 = SURFACE_STYLE_USAGE(.BOTH.,#547737); +#547737 = SURFACE_SIDE_STYLE('',(#547738)); +#547738 = SURFACE_STYLE_FILL_AREA(#547739); +#547739 = FILL_AREA_STYLE('',(#547740)); +#547740 = FILL_AREA_STYLE_COLOUR('',#546242); +#547741 = OVER_RIDING_STYLED_ITEM('overriding color',(#547742),#113965, + #546228); +#547742 = PRESENTATION_STYLE_ASSIGNMENT((#547743)); +#547743 = SURFACE_STYLE_USAGE(.BOTH.,#547744); +#547744 = SURFACE_SIDE_STYLE('',(#547745)); +#547745 = SURFACE_STYLE_FILL_AREA(#547746); +#547746 = FILL_AREA_STYLE('',(#547747)); +#547747 = FILL_AREA_STYLE_COLOUR('',#546242); +#547748 = OVER_RIDING_STYLED_ITEM('overriding color',(#547749),#113982, + #546228); +#547749 = PRESENTATION_STYLE_ASSIGNMENT((#547750)); +#547750 = SURFACE_STYLE_USAGE(.BOTH.,#547751); +#547751 = SURFACE_SIDE_STYLE('',(#547752)); +#547752 = SURFACE_STYLE_FILL_AREA(#547753); +#547753 = FILL_AREA_STYLE('',(#547754)); +#547754 = FILL_AREA_STYLE_COLOUR('',#546242); +#547755 = OVER_RIDING_STYLED_ITEM('overriding color',(#547756),#113999, + #546228); +#547756 = PRESENTATION_STYLE_ASSIGNMENT((#547757)); +#547757 = SURFACE_STYLE_USAGE(.BOTH.,#547758); +#547758 = SURFACE_SIDE_STYLE('',(#547759)); +#547759 = SURFACE_STYLE_FILL_AREA(#547760); +#547760 = FILL_AREA_STYLE('',(#547761)); +#547761 = FILL_AREA_STYLE_COLOUR('',#546242); +#547762 = OVER_RIDING_STYLED_ITEM('overriding color',(#547763),#114016, + #546228); +#547763 = PRESENTATION_STYLE_ASSIGNMENT((#547764)); +#547764 = SURFACE_STYLE_USAGE(.BOTH.,#547765); +#547765 = SURFACE_SIDE_STYLE('',(#547766)); +#547766 = SURFACE_STYLE_FILL_AREA(#547767); +#547767 = FILL_AREA_STYLE('',(#547768)); +#547768 = FILL_AREA_STYLE_COLOUR('',#546242); +#547769 = OVER_RIDING_STYLED_ITEM('overriding color',(#547770),#114033, + #546228); +#547770 = PRESENTATION_STYLE_ASSIGNMENT((#547771)); +#547771 = SURFACE_STYLE_USAGE(.BOTH.,#547772); +#547772 = SURFACE_SIDE_STYLE('',(#547773)); +#547773 = SURFACE_STYLE_FILL_AREA(#547774); +#547774 = FILL_AREA_STYLE('',(#547775)); +#547775 = FILL_AREA_STYLE_COLOUR('',#546242); +#547776 = OVER_RIDING_STYLED_ITEM('overriding color',(#547777),#114050, + #546228); +#547777 = PRESENTATION_STYLE_ASSIGNMENT((#547778)); +#547778 = SURFACE_STYLE_USAGE(.BOTH.,#547779); +#547779 = SURFACE_SIDE_STYLE('',(#547780)); +#547780 = SURFACE_STYLE_FILL_AREA(#547781); +#547781 = FILL_AREA_STYLE('',(#547782)); +#547782 = FILL_AREA_STYLE_COLOUR('',#546242); +#547783 = OVER_RIDING_STYLED_ITEM('overriding color',(#547784),#114067, + #546228); +#547784 = PRESENTATION_STYLE_ASSIGNMENT((#547785)); +#547785 = SURFACE_STYLE_USAGE(.BOTH.,#547786); +#547786 = SURFACE_SIDE_STYLE('',(#547787)); +#547787 = SURFACE_STYLE_FILL_AREA(#547788); +#547788 = FILL_AREA_STYLE('',(#547789)); +#547789 = FILL_AREA_STYLE_COLOUR('',#546242); +#547790 = OVER_RIDING_STYLED_ITEM('overriding color',(#547791),#114084, + #546228); +#547791 = PRESENTATION_STYLE_ASSIGNMENT((#547792)); +#547792 = SURFACE_STYLE_USAGE(.BOTH.,#547793); +#547793 = SURFACE_SIDE_STYLE('',(#547794)); +#547794 = SURFACE_STYLE_FILL_AREA(#547795); +#547795 = FILL_AREA_STYLE('',(#547796)); +#547796 = FILL_AREA_STYLE_COLOUR('',#546242); +#547797 = OVER_RIDING_STYLED_ITEM('overriding color',(#547798),#114101, + #546228); +#547798 = PRESENTATION_STYLE_ASSIGNMENT((#547799)); +#547799 = SURFACE_STYLE_USAGE(.BOTH.,#547800); +#547800 = SURFACE_SIDE_STYLE('',(#547801)); +#547801 = SURFACE_STYLE_FILL_AREA(#547802); +#547802 = FILL_AREA_STYLE('',(#547803)); +#547803 = FILL_AREA_STYLE_COLOUR('',#546242); +#547804 = OVER_RIDING_STYLED_ITEM('overriding color',(#547805),#114118, + #546228); +#547805 = PRESENTATION_STYLE_ASSIGNMENT((#547806)); +#547806 = SURFACE_STYLE_USAGE(.BOTH.,#547807); +#547807 = SURFACE_SIDE_STYLE('',(#547808)); +#547808 = SURFACE_STYLE_FILL_AREA(#547809); +#547809 = FILL_AREA_STYLE('',(#547810)); +#547810 = FILL_AREA_STYLE_COLOUR('',#546242); +#547811 = OVER_RIDING_STYLED_ITEM('overriding color',(#547812),#114135, + #546228); +#547812 = PRESENTATION_STYLE_ASSIGNMENT((#547813)); +#547813 = SURFACE_STYLE_USAGE(.BOTH.,#547814); +#547814 = SURFACE_SIDE_STYLE('',(#547815)); +#547815 = SURFACE_STYLE_FILL_AREA(#547816); +#547816 = FILL_AREA_STYLE('',(#547817)); +#547817 = FILL_AREA_STYLE_COLOUR('',#546242); +#547818 = OVER_RIDING_STYLED_ITEM('overriding color',(#547819),#114152, + #546228); +#547819 = PRESENTATION_STYLE_ASSIGNMENT((#547820)); +#547820 = SURFACE_STYLE_USAGE(.BOTH.,#547821); +#547821 = SURFACE_SIDE_STYLE('',(#547822)); +#547822 = SURFACE_STYLE_FILL_AREA(#547823); +#547823 = FILL_AREA_STYLE('',(#547824)); +#547824 = FILL_AREA_STYLE_COLOUR('',#546242); +#547825 = OVER_RIDING_STYLED_ITEM('overriding color',(#547826),#114169, + #546228); +#547826 = PRESENTATION_STYLE_ASSIGNMENT((#547827)); +#547827 = SURFACE_STYLE_USAGE(.BOTH.,#547828); +#547828 = SURFACE_SIDE_STYLE('',(#547829)); +#547829 = SURFACE_STYLE_FILL_AREA(#547830); +#547830 = FILL_AREA_STYLE('',(#547831)); +#547831 = FILL_AREA_STYLE_COLOUR('',#546242); +#547832 = OVER_RIDING_STYLED_ITEM('overriding color',(#547833),#114186, + #546228); +#547833 = PRESENTATION_STYLE_ASSIGNMENT((#547834)); +#547834 = SURFACE_STYLE_USAGE(.BOTH.,#547835); +#547835 = SURFACE_SIDE_STYLE('',(#547836)); +#547836 = SURFACE_STYLE_FILL_AREA(#547837); +#547837 = FILL_AREA_STYLE('',(#547838)); +#547838 = FILL_AREA_STYLE_COLOUR('',#546242); +#547839 = OVER_RIDING_STYLED_ITEM('overriding color',(#547840),#114203, + #546228); +#547840 = PRESENTATION_STYLE_ASSIGNMENT((#547841)); +#547841 = SURFACE_STYLE_USAGE(.BOTH.,#547842); +#547842 = SURFACE_SIDE_STYLE('',(#547843)); +#547843 = SURFACE_STYLE_FILL_AREA(#547844); +#547844 = FILL_AREA_STYLE('',(#547845)); +#547845 = FILL_AREA_STYLE_COLOUR('',#546242); +#547846 = OVER_RIDING_STYLED_ITEM('overriding color',(#547847),#114220, + #546228); +#547847 = PRESENTATION_STYLE_ASSIGNMENT((#547848)); +#547848 = SURFACE_STYLE_USAGE(.BOTH.,#547849); +#547849 = SURFACE_SIDE_STYLE('',(#547850)); +#547850 = SURFACE_STYLE_FILL_AREA(#547851); +#547851 = FILL_AREA_STYLE('',(#547852)); +#547852 = FILL_AREA_STYLE_COLOUR('',#546242); +#547853 = OVER_RIDING_STYLED_ITEM('overriding color',(#547854),#114237, + #546228); +#547854 = PRESENTATION_STYLE_ASSIGNMENT((#547855)); +#547855 = SURFACE_STYLE_USAGE(.BOTH.,#547856); +#547856 = SURFACE_SIDE_STYLE('',(#547857)); +#547857 = SURFACE_STYLE_FILL_AREA(#547858); +#547858 = FILL_AREA_STYLE('',(#547859)); +#547859 = FILL_AREA_STYLE_COLOUR('',#546242); +#547860 = OVER_RIDING_STYLED_ITEM('overriding color',(#547861),#114254, + #546228); +#547861 = PRESENTATION_STYLE_ASSIGNMENT((#547862)); +#547862 = SURFACE_STYLE_USAGE(.BOTH.,#547863); +#547863 = SURFACE_SIDE_STYLE('',(#547864)); +#547864 = SURFACE_STYLE_FILL_AREA(#547865); +#547865 = FILL_AREA_STYLE('',(#547866)); +#547866 = FILL_AREA_STYLE_COLOUR('',#546242); +#547867 = OVER_RIDING_STYLED_ITEM('overriding color',(#547868),#114271, + #546228); +#547868 = PRESENTATION_STYLE_ASSIGNMENT((#547869)); +#547869 = SURFACE_STYLE_USAGE(.BOTH.,#547870); +#547870 = SURFACE_SIDE_STYLE('',(#547871)); +#547871 = SURFACE_STYLE_FILL_AREA(#547872); +#547872 = FILL_AREA_STYLE('',(#547873)); +#547873 = FILL_AREA_STYLE_COLOUR('',#546242); +#547874 = OVER_RIDING_STYLED_ITEM('overriding color',(#547875),#114283, + #546228); +#547875 = PRESENTATION_STYLE_ASSIGNMENT((#547876)); +#547876 = SURFACE_STYLE_USAGE(.BOTH.,#547877); +#547877 = SURFACE_SIDE_STYLE('',(#547878)); +#547878 = SURFACE_STYLE_FILL_AREA(#547879); +#547879 = FILL_AREA_STYLE('',(#547880)); +#547880 = FILL_AREA_STYLE_COLOUR('',#546242); +#547881 = OVER_RIDING_STYLED_ITEM('overriding color',(#547882),#114305, + #546228); +#547882 = PRESENTATION_STYLE_ASSIGNMENT((#547883)); +#547883 = SURFACE_STYLE_USAGE(.BOTH.,#547884); +#547884 = SURFACE_SIDE_STYLE('',(#547885)); +#547885 = SURFACE_STYLE_FILL_AREA(#547886); +#547886 = FILL_AREA_STYLE('',(#547887)); +#547887 = FILL_AREA_STYLE_COLOUR('',#546242); +#547888 = OVER_RIDING_STYLED_ITEM('overriding color',(#547889),#114322, + #546228); +#547889 = PRESENTATION_STYLE_ASSIGNMENT((#547890)); +#547890 = SURFACE_STYLE_USAGE(.BOTH.,#547891); +#547891 = SURFACE_SIDE_STYLE('',(#547892)); +#547892 = SURFACE_STYLE_FILL_AREA(#547893); +#547893 = FILL_AREA_STYLE('',(#547894)); +#547894 = FILL_AREA_STYLE_COLOUR('',#546242); +#547895 = OVER_RIDING_STYLED_ITEM('overriding color',(#547896),#114339, + #546228); +#547896 = PRESENTATION_STYLE_ASSIGNMENT((#547897)); +#547897 = SURFACE_STYLE_USAGE(.BOTH.,#547898); +#547898 = SURFACE_SIDE_STYLE('',(#547899)); +#547899 = SURFACE_STYLE_FILL_AREA(#547900); +#547900 = FILL_AREA_STYLE('',(#547901)); +#547901 = FILL_AREA_STYLE_COLOUR('',#546242); +#547902 = OVER_RIDING_STYLED_ITEM('overriding color',(#547903),#114356, + #546228); +#547903 = PRESENTATION_STYLE_ASSIGNMENT((#547904)); +#547904 = SURFACE_STYLE_USAGE(.BOTH.,#547905); +#547905 = SURFACE_SIDE_STYLE('',(#547906)); +#547906 = SURFACE_STYLE_FILL_AREA(#547907); +#547907 = FILL_AREA_STYLE('',(#547908)); +#547908 = FILL_AREA_STYLE_COLOUR('',#546242); +#547909 = OVER_RIDING_STYLED_ITEM('overriding color',(#547910),#114373, + #546228); +#547910 = PRESENTATION_STYLE_ASSIGNMENT((#547911)); +#547911 = SURFACE_STYLE_USAGE(.BOTH.,#547912); +#547912 = SURFACE_SIDE_STYLE('',(#547913)); +#547913 = SURFACE_STYLE_FILL_AREA(#547914); +#547914 = FILL_AREA_STYLE('',(#547915)); +#547915 = FILL_AREA_STYLE_COLOUR('',#546242); +#547916 = OVER_RIDING_STYLED_ITEM('overriding color',(#547917),#114390, + #546228); +#547917 = PRESENTATION_STYLE_ASSIGNMENT((#547918)); +#547918 = SURFACE_STYLE_USAGE(.BOTH.,#547919); +#547919 = SURFACE_SIDE_STYLE('',(#547920)); +#547920 = SURFACE_STYLE_FILL_AREA(#547921); +#547921 = FILL_AREA_STYLE('',(#547922)); +#547922 = FILL_AREA_STYLE_COLOUR('',#546242); +#547923 = OVER_RIDING_STYLED_ITEM('overriding color',(#547924),#114407, + #546228); +#547924 = PRESENTATION_STYLE_ASSIGNMENT((#547925)); +#547925 = SURFACE_STYLE_USAGE(.BOTH.,#547926); +#547926 = SURFACE_SIDE_STYLE('',(#547927)); +#547927 = SURFACE_STYLE_FILL_AREA(#547928); +#547928 = FILL_AREA_STYLE('',(#547929)); +#547929 = FILL_AREA_STYLE_COLOUR('',#546242); +#547930 = OVER_RIDING_STYLED_ITEM('overriding color',(#547931),#114424, + #546228); +#547931 = PRESENTATION_STYLE_ASSIGNMENT((#547932)); +#547932 = SURFACE_STYLE_USAGE(.BOTH.,#547933); +#547933 = SURFACE_SIDE_STYLE('',(#547934)); +#547934 = SURFACE_STYLE_FILL_AREA(#547935); +#547935 = FILL_AREA_STYLE('',(#547936)); +#547936 = FILL_AREA_STYLE_COLOUR('',#546242); +#547937 = OVER_RIDING_STYLED_ITEM('overriding color',(#547938),#114441, + #546228); +#547938 = PRESENTATION_STYLE_ASSIGNMENT((#547939)); +#547939 = SURFACE_STYLE_USAGE(.BOTH.,#547940); +#547940 = SURFACE_SIDE_STYLE('',(#547941)); +#547941 = SURFACE_STYLE_FILL_AREA(#547942); +#547942 = FILL_AREA_STYLE('',(#547943)); +#547943 = FILL_AREA_STYLE_COLOUR('',#546242); +#547944 = OVER_RIDING_STYLED_ITEM('overriding color',(#547945),#114458, + #546228); +#547945 = PRESENTATION_STYLE_ASSIGNMENT((#547946)); +#547946 = SURFACE_STYLE_USAGE(.BOTH.,#547947); +#547947 = SURFACE_SIDE_STYLE('',(#547948)); +#547948 = SURFACE_STYLE_FILL_AREA(#547949); +#547949 = FILL_AREA_STYLE('',(#547950)); +#547950 = FILL_AREA_STYLE_COLOUR('',#546242); +#547951 = OVER_RIDING_STYLED_ITEM('overriding color',(#547952),#114470, + #546228); +#547952 = PRESENTATION_STYLE_ASSIGNMENT((#547953)); +#547953 = SURFACE_STYLE_USAGE(.BOTH.,#547954); +#547954 = SURFACE_SIDE_STYLE('',(#547955)); +#547955 = SURFACE_STYLE_FILL_AREA(#547956); +#547956 = FILL_AREA_STYLE('',(#547957)); +#547957 = FILL_AREA_STYLE_COLOUR('',#546242); +#547958 = OVER_RIDING_STYLED_ITEM('overriding color',(#547959),#114492, + #546228); +#547959 = PRESENTATION_STYLE_ASSIGNMENT((#547960)); +#547960 = SURFACE_STYLE_USAGE(.BOTH.,#547961); +#547961 = SURFACE_SIDE_STYLE('',(#547962)); +#547962 = SURFACE_STYLE_FILL_AREA(#547963); +#547963 = FILL_AREA_STYLE('',(#547964)); +#547964 = FILL_AREA_STYLE_COLOUR('',#546242); +#547965 = OVER_RIDING_STYLED_ITEM('overriding color',(#547966),#114509, + #546228); +#547966 = PRESENTATION_STYLE_ASSIGNMENT((#547967)); +#547967 = SURFACE_STYLE_USAGE(.BOTH.,#547968); +#547968 = SURFACE_SIDE_STYLE('',(#547969)); +#547969 = SURFACE_STYLE_FILL_AREA(#547970); +#547970 = FILL_AREA_STYLE('',(#547971)); +#547971 = FILL_AREA_STYLE_COLOUR('',#546242); +#547972 = OVER_RIDING_STYLED_ITEM('overriding color',(#547973),#114526, + #546228); +#547973 = PRESENTATION_STYLE_ASSIGNMENT((#547974)); +#547974 = SURFACE_STYLE_USAGE(.BOTH.,#547975); +#547975 = SURFACE_SIDE_STYLE('',(#547976)); +#547976 = SURFACE_STYLE_FILL_AREA(#547977); +#547977 = FILL_AREA_STYLE('',(#547978)); +#547978 = FILL_AREA_STYLE_COLOUR('',#546242); +#547979 = OVER_RIDING_STYLED_ITEM('overriding color',(#547980),#114543, + #546228); +#547980 = PRESENTATION_STYLE_ASSIGNMENT((#547981)); +#547981 = SURFACE_STYLE_USAGE(.BOTH.,#547982); +#547982 = SURFACE_SIDE_STYLE('',(#547983)); +#547983 = SURFACE_STYLE_FILL_AREA(#547984); +#547984 = FILL_AREA_STYLE('',(#547985)); +#547985 = FILL_AREA_STYLE_COLOUR('',#546242); +#547986 = OVER_RIDING_STYLED_ITEM('overriding color',(#547987),#114560, + #546228); +#547987 = PRESENTATION_STYLE_ASSIGNMENT((#547988)); +#547988 = SURFACE_STYLE_USAGE(.BOTH.,#547989); +#547989 = SURFACE_SIDE_STYLE('',(#547990)); +#547990 = SURFACE_STYLE_FILL_AREA(#547991); +#547991 = FILL_AREA_STYLE('',(#547992)); +#547992 = FILL_AREA_STYLE_COLOUR('',#546242); +#547993 = OVER_RIDING_STYLED_ITEM('overriding color',(#547994),#114577, + #546228); +#547994 = PRESENTATION_STYLE_ASSIGNMENT((#547995)); +#547995 = SURFACE_STYLE_USAGE(.BOTH.,#547996); +#547996 = SURFACE_SIDE_STYLE('',(#547997)); +#547997 = SURFACE_STYLE_FILL_AREA(#547998); +#547998 = FILL_AREA_STYLE('',(#547999)); +#547999 = FILL_AREA_STYLE_COLOUR('',#546242); +#548000 = OVER_RIDING_STYLED_ITEM('overriding color',(#548001),#114594, + #546228); +#548001 = PRESENTATION_STYLE_ASSIGNMENT((#548002)); +#548002 = SURFACE_STYLE_USAGE(.BOTH.,#548003); +#548003 = SURFACE_SIDE_STYLE('',(#548004)); +#548004 = SURFACE_STYLE_FILL_AREA(#548005); +#548005 = FILL_AREA_STYLE('',(#548006)); +#548006 = FILL_AREA_STYLE_COLOUR('',#546242); +#548007 = OVER_RIDING_STYLED_ITEM('overriding color',(#548008),#114611, + #546228); +#548008 = PRESENTATION_STYLE_ASSIGNMENT((#548009)); +#548009 = SURFACE_STYLE_USAGE(.BOTH.,#548010); +#548010 = SURFACE_SIDE_STYLE('',(#548011)); +#548011 = SURFACE_STYLE_FILL_AREA(#548012); +#548012 = FILL_AREA_STYLE('',(#548013)); +#548013 = FILL_AREA_STYLE_COLOUR('',#546242); +#548014 = OVER_RIDING_STYLED_ITEM('overriding color',(#548015),#114628, + #546228); +#548015 = PRESENTATION_STYLE_ASSIGNMENT((#548016)); +#548016 = SURFACE_STYLE_USAGE(.BOTH.,#548017); +#548017 = SURFACE_SIDE_STYLE('',(#548018)); +#548018 = SURFACE_STYLE_FILL_AREA(#548019); +#548019 = FILL_AREA_STYLE('',(#548020)); +#548020 = FILL_AREA_STYLE_COLOUR('',#546242); +#548021 = OVER_RIDING_STYLED_ITEM('overriding color',(#548022),#114645, + #546228); +#548022 = PRESENTATION_STYLE_ASSIGNMENT((#548023)); +#548023 = SURFACE_STYLE_USAGE(.BOTH.,#548024); +#548024 = SURFACE_SIDE_STYLE('',(#548025)); +#548025 = SURFACE_STYLE_FILL_AREA(#548026); +#548026 = FILL_AREA_STYLE('',(#548027)); +#548027 = FILL_AREA_STYLE_COLOUR('',#546242); +#548028 = OVER_RIDING_STYLED_ITEM('overriding color',(#548029),#114662, + #546228); +#548029 = PRESENTATION_STYLE_ASSIGNMENT((#548030)); +#548030 = SURFACE_STYLE_USAGE(.BOTH.,#548031); +#548031 = SURFACE_SIDE_STYLE('',(#548032)); +#548032 = SURFACE_STYLE_FILL_AREA(#548033); +#548033 = FILL_AREA_STYLE('',(#548034)); +#548034 = FILL_AREA_STYLE_COLOUR('',#546242); +#548035 = OVER_RIDING_STYLED_ITEM('overriding color',(#548036),#114674, + #546228); +#548036 = PRESENTATION_STYLE_ASSIGNMENT((#548037)); +#548037 = SURFACE_STYLE_USAGE(.BOTH.,#548038); +#548038 = SURFACE_SIDE_STYLE('',(#548039)); +#548039 = SURFACE_STYLE_FILL_AREA(#548040); +#548040 = FILL_AREA_STYLE('',(#548041)); +#548041 = FILL_AREA_STYLE_COLOUR('',#546242); +#548042 = OVER_RIDING_STYLED_ITEM('overriding color',(#548043),#114691, + #546228); +#548043 = PRESENTATION_STYLE_ASSIGNMENT((#548044)); +#548044 = SURFACE_STYLE_USAGE(.BOTH.,#548045); +#548045 = SURFACE_SIDE_STYLE('',(#548046)); +#548046 = SURFACE_STYLE_FILL_AREA(#548047); +#548047 = FILL_AREA_STYLE('',(#548048)); +#548048 = FILL_AREA_STYLE_COLOUR('',#546242); +#548049 = OVER_RIDING_STYLED_ITEM('overriding color',(#548050),#114708, + #546228); +#548050 = PRESENTATION_STYLE_ASSIGNMENT((#548051)); +#548051 = SURFACE_STYLE_USAGE(.BOTH.,#548052); +#548052 = SURFACE_SIDE_STYLE('',(#548053)); +#548053 = SURFACE_STYLE_FILL_AREA(#548054); +#548054 = FILL_AREA_STYLE('',(#548055)); +#548055 = FILL_AREA_STYLE_COLOUR('',#546242); +#548056 = OVER_RIDING_STYLED_ITEM('overriding color',(#548057),#114725, + #546228); +#548057 = PRESENTATION_STYLE_ASSIGNMENT((#548058)); +#548058 = SURFACE_STYLE_USAGE(.BOTH.,#548059); +#548059 = SURFACE_SIDE_STYLE('',(#548060)); +#548060 = SURFACE_STYLE_FILL_AREA(#548061); +#548061 = FILL_AREA_STYLE('',(#548062)); +#548062 = FILL_AREA_STYLE_COLOUR('',#546242); +#548063 = OVER_RIDING_STYLED_ITEM('overriding color',(#548064),#114742, + #546228); +#548064 = PRESENTATION_STYLE_ASSIGNMENT((#548065)); +#548065 = SURFACE_STYLE_USAGE(.BOTH.,#548066); +#548066 = SURFACE_SIDE_STYLE('',(#548067)); +#548067 = SURFACE_STYLE_FILL_AREA(#548068); +#548068 = FILL_AREA_STYLE('',(#548069)); +#548069 = FILL_AREA_STYLE_COLOUR('',#546242); +#548070 = OVER_RIDING_STYLED_ITEM('overriding color',(#548071),#114759, + #546228); +#548071 = PRESENTATION_STYLE_ASSIGNMENT((#548072)); +#548072 = SURFACE_STYLE_USAGE(.BOTH.,#548073); +#548073 = SURFACE_SIDE_STYLE('',(#548074)); +#548074 = SURFACE_STYLE_FILL_AREA(#548075); +#548075 = FILL_AREA_STYLE('',(#548076)); +#548076 = FILL_AREA_STYLE_COLOUR('',#546242); +#548077 = OVER_RIDING_STYLED_ITEM('overriding color',(#548078),#114776, + #546228); +#548078 = PRESENTATION_STYLE_ASSIGNMENT((#548079)); +#548079 = SURFACE_STYLE_USAGE(.BOTH.,#548080); +#548080 = SURFACE_SIDE_STYLE('',(#548081)); +#548081 = SURFACE_STYLE_FILL_AREA(#548082); +#548082 = FILL_AREA_STYLE('',(#548083)); +#548083 = FILL_AREA_STYLE_COLOUR('',#546242); +#548084 = OVER_RIDING_STYLED_ITEM('overriding color',(#548085),#114793, + #546228); +#548085 = PRESENTATION_STYLE_ASSIGNMENT((#548086)); +#548086 = SURFACE_STYLE_USAGE(.BOTH.,#548087); +#548087 = SURFACE_SIDE_STYLE('',(#548088)); +#548088 = SURFACE_STYLE_FILL_AREA(#548089); +#548089 = FILL_AREA_STYLE('',(#548090)); +#548090 = FILL_AREA_STYLE_COLOUR('',#546242); +#548091 = OVER_RIDING_STYLED_ITEM('overriding color',(#548092),#114810, + #546228); +#548092 = PRESENTATION_STYLE_ASSIGNMENT((#548093)); +#548093 = SURFACE_STYLE_USAGE(.BOTH.,#548094); +#548094 = SURFACE_SIDE_STYLE('',(#548095)); +#548095 = SURFACE_STYLE_FILL_AREA(#548096); +#548096 = FILL_AREA_STYLE('',(#548097)); +#548097 = FILL_AREA_STYLE_COLOUR('',#546242); +#548098 = OVER_RIDING_STYLED_ITEM('overriding color',(#548099),#114827, + #546228); +#548099 = PRESENTATION_STYLE_ASSIGNMENT((#548100)); +#548100 = SURFACE_STYLE_USAGE(.BOTH.,#548101); +#548101 = SURFACE_SIDE_STYLE('',(#548102)); +#548102 = SURFACE_STYLE_FILL_AREA(#548103); +#548103 = FILL_AREA_STYLE('',(#548104)); +#548104 = FILL_AREA_STYLE_COLOUR('',#546242); +#548105 = OVER_RIDING_STYLED_ITEM('overriding color',(#548106),#114844, + #546228); +#548106 = PRESENTATION_STYLE_ASSIGNMENT((#548107)); +#548107 = SURFACE_STYLE_USAGE(.BOTH.,#548108); +#548108 = SURFACE_SIDE_STYLE('',(#548109)); +#548109 = SURFACE_STYLE_FILL_AREA(#548110); +#548110 = FILL_AREA_STYLE('',(#548111)); +#548111 = FILL_AREA_STYLE_COLOUR('',#546242); +#548112 = OVER_RIDING_STYLED_ITEM('overriding color',(#548113),#114861, + #546228); +#548113 = PRESENTATION_STYLE_ASSIGNMENT((#548114)); +#548114 = SURFACE_STYLE_USAGE(.BOTH.,#548115); +#548115 = SURFACE_SIDE_STYLE('',(#548116)); +#548116 = SURFACE_STYLE_FILL_AREA(#548117); +#548117 = FILL_AREA_STYLE('',(#548118)); +#548118 = FILL_AREA_STYLE_COLOUR('',#546242); +#548119 = OVER_RIDING_STYLED_ITEM('overriding color',(#548120),#114883, + #546228); +#548120 = PRESENTATION_STYLE_ASSIGNMENT((#548121)); +#548121 = SURFACE_STYLE_USAGE(.BOTH.,#548122); +#548122 = SURFACE_SIDE_STYLE('',(#548123)); +#548123 = SURFACE_STYLE_FILL_AREA(#548124); +#548124 = FILL_AREA_STYLE('',(#548125)); +#548125 = FILL_AREA_STYLE_COLOUR('',#546242); +#548126 = OVER_RIDING_STYLED_ITEM('overriding color',(#548127),#114900, + #546228); +#548127 = PRESENTATION_STYLE_ASSIGNMENT((#548128)); +#548128 = SURFACE_STYLE_USAGE(.BOTH.,#548129); +#548129 = SURFACE_SIDE_STYLE('',(#548130)); +#548130 = SURFACE_STYLE_FILL_AREA(#548131); +#548131 = FILL_AREA_STYLE('',(#548132)); +#548132 = FILL_AREA_STYLE_COLOUR('',#546242); +#548133 = OVER_RIDING_STYLED_ITEM('overriding color',(#548134),#114917, + #546228); +#548134 = PRESENTATION_STYLE_ASSIGNMENT((#548135)); +#548135 = SURFACE_STYLE_USAGE(.BOTH.,#548136); +#548136 = SURFACE_SIDE_STYLE('',(#548137)); +#548137 = SURFACE_STYLE_FILL_AREA(#548138); +#548138 = FILL_AREA_STYLE('',(#548139)); +#548139 = FILL_AREA_STYLE_COLOUR('',#546242); +#548140 = OVER_RIDING_STYLED_ITEM('overriding color',(#548141),#114934, + #546228); +#548141 = PRESENTATION_STYLE_ASSIGNMENT((#548142)); +#548142 = SURFACE_STYLE_USAGE(.BOTH.,#548143); +#548143 = SURFACE_SIDE_STYLE('',(#548144)); +#548144 = SURFACE_STYLE_FILL_AREA(#548145); +#548145 = FILL_AREA_STYLE('',(#548146)); +#548146 = FILL_AREA_STYLE_COLOUR('',#546242); +#548147 = OVER_RIDING_STYLED_ITEM('overriding color',(#548148),#114951, + #546228); +#548148 = PRESENTATION_STYLE_ASSIGNMENT((#548149)); +#548149 = SURFACE_STYLE_USAGE(.BOTH.,#548150); +#548150 = SURFACE_SIDE_STYLE('',(#548151)); +#548151 = SURFACE_STYLE_FILL_AREA(#548152); +#548152 = FILL_AREA_STYLE('',(#548153)); +#548153 = FILL_AREA_STYLE_COLOUR('',#546242); +#548154 = OVER_RIDING_STYLED_ITEM('overriding color',(#548155),#114968, + #546228); +#548155 = PRESENTATION_STYLE_ASSIGNMENT((#548156)); +#548156 = SURFACE_STYLE_USAGE(.BOTH.,#548157); +#548157 = SURFACE_SIDE_STYLE('',(#548158)); +#548158 = SURFACE_STYLE_FILL_AREA(#548159); +#548159 = FILL_AREA_STYLE('',(#548160)); +#548160 = FILL_AREA_STYLE_COLOUR('',#546242); +#548161 = OVER_RIDING_STYLED_ITEM('overriding color',(#548162),#114980, + #546228); +#548162 = PRESENTATION_STYLE_ASSIGNMENT((#548163)); +#548163 = SURFACE_STYLE_USAGE(.BOTH.,#548164); +#548164 = SURFACE_SIDE_STYLE('',(#548165)); +#548165 = SURFACE_STYLE_FILL_AREA(#548166); +#548166 = FILL_AREA_STYLE('',(#548167)); +#548167 = FILL_AREA_STYLE_COLOUR('',#546242); +#548168 = OVER_RIDING_STYLED_ITEM('overriding color',(#548169),#114997, + #546228); +#548169 = PRESENTATION_STYLE_ASSIGNMENT((#548170)); +#548170 = SURFACE_STYLE_USAGE(.BOTH.,#548171); +#548171 = SURFACE_SIDE_STYLE('',(#548172)); +#548172 = SURFACE_STYLE_FILL_AREA(#548173); +#548173 = FILL_AREA_STYLE('',(#548174)); +#548174 = FILL_AREA_STYLE_COLOUR('',#546242); +#548175 = OVER_RIDING_STYLED_ITEM('overriding color',(#548176),#115014, + #546228); +#548176 = PRESENTATION_STYLE_ASSIGNMENT((#548177)); +#548177 = SURFACE_STYLE_USAGE(.BOTH.,#548178); +#548178 = SURFACE_SIDE_STYLE('',(#548179)); +#548179 = SURFACE_STYLE_FILL_AREA(#548180); +#548180 = FILL_AREA_STYLE('',(#548181)); +#548181 = FILL_AREA_STYLE_COLOUR('',#546242); +#548182 = OVER_RIDING_STYLED_ITEM('overriding color',(#548183),#115031, + #546228); +#548183 = PRESENTATION_STYLE_ASSIGNMENT((#548184)); +#548184 = SURFACE_STYLE_USAGE(.BOTH.,#548185); +#548185 = SURFACE_SIDE_STYLE('',(#548186)); +#548186 = SURFACE_STYLE_FILL_AREA(#548187); +#548187 = FILL_AREA_STYLE('',(#548188)); +#548188 = FILL_AREA_STYLE_COLOUR('',#546242); +#548189 = OVER_RIDING_STYLED_ITEM('overriding color',(#548190),#115048, + #546228); +#548190 = PRESENTATION_STYLE_ASSIGNMENT((#548191)); +#548191 = SURFACE_STYLE_USAGE(.BOTH.,#548192); +#548192 = SURFACE_SIDE_STYLE('',(#548193)); +#548193 = SURFACE_STYLE_FILL_AREA(#548194); +#548194 = FILL_AREA_STYLE('',(#548195)); +#548195 = FILL_AREA_STYLE_COLOUR('',#546242); +#548196 = OVER_RIDING_STYLED_ITEM('overriding color',(#548197),#115065, + #546228); +#548197 = PRESENTATION_STYLE_ASSIGNMENT((#548198)); +#548198 = SURFACE_STYLE_USAGE(.BOTH.,#548199); +#548199 = SURFACE_SIDE_STYLE('',(#548200)); +#548200 = SURFACE_STYLE_FILL_AREA(#548201); +#548201 = FILL_AREA_STYLE('',(#548202)); +#548202 = FILL_AREA_STYLE_COLOUR('',#546242); +#548203 = OVER_RIDING_STYLED_ITEM('overriding color',(#548204),#115077, + #546228); +#548204 = PRESENTATION_STYLE_ASSIGNMENT((#548205)); +#548205 = SURFACE_STYLE_USAGE(.BOTH.,#548206); +#548206 = SURFACE_SIDE_STYLE('',(#548207)); +#548207 = SURFACE_STYLE_FILL_AREA(#548208); +#548208 = FILL_AREA_STYLE('',(#548209)); +#548209 = FILL_AREA_STYLE_COLOUR('',#546242); +#548210 = OVER_RIDING_STYLED_ITEM('overriding color',(#548211),#115094, + #546228); +#548211 = PRESENTATION_STYLE_ASSIGNMENT((#548212)); +#548212 = SURFACE_STYLE_USAGE(.BOTH.,#548213); +#548213 = SURFACE_SIDE_STYLE('',(#548214)); +#548214 = SURFACE_STYLE_FILL_AREA(#548215); +#548215 = FILL_AREA_STYLE('',(#548216)); +#548216 = FILL_AREA_STYLE_COLOUR('',#546242); +#548217 = OVER_RIDING_STYLED_ITEM('overriding color',(#548218),#115111, + #546228); +#548218 = PRESENTATION_STYLE_ASSIGNMENT((#548219)); +#548219 = SURFACE_STYLE_USAGE(.BOTH.,#548220); +#548220 = SURFACE_SIDE_STYLE('',(#548221)); +#548221 = SURFACE_STYLE_FILL_AREA(#548222); +#548222 = FILL_AREA_STYLE('',(#548223)); +#548223 = FILL_AREA_STYLE_COLOUR('',#546242); +#548224 = OVER_RIDING_STYLED_ITEM('overriding color',(#548225),#115128, + #546228); +#548225 = PRESENTATION_STYLE_ASSIGNMENT((#548226)); +#548226 = SURFACE_STYLE_USAGE(.BOTH.,#548227); +#548227 = SURFACE_SIDE_STYLE('',(#548228)); +#548228 = SURFACE_STYLE_FILL_AREA(#548229); +#548229 = FILL_AREA_STYLE('',(#548230)); +#548230 = FILL_AREA_STYLE_COLOUR('',#546242); +#548231 = OVER_RIDING_STYLED_ITEM('overriding color',(#548232),#115145, + #546228); +#548232 = PRESENTATION_STYLE_ASSIGNMENT((#548233)); +#548233 = SURFACE_STYLE_USAGE(.BOTH.,#548234); +#548234 = SURFACE_SIDE_STYLE('',(#548235)); +#548235 = SURFACE_STYLE_FILL_AREA(#548236); +#548236 = FILL_AREA_STYLE('',(#548237)); +#548237 = FILL_AREA_STYLE_COLOUR('',#546242); +#548238 = OVER_RIDING_STYLED_ITEM('overriding color',(#548239),#115162, + #546228); +#548239 = PRESENTATION_STYLE_ASSIGNMENT((#548240)); +#548240 = SURFACE_STYLE_USAGE(.BOTH.,#548241); +#548241 = SURFACE_SIDE_STYLE('',(#548242)); +#548242 = SURFACE_STYLE_FILL_AREA(#548243); +#548243 = FILL_AREA_STYLE('',(#548244)); +#548244 = FILL_AREA_STYLE_COLOUR('',#546242); +#548245 = OVER_RIDING_STYLED_ITEM('overriding color',(#548246),#115174, + #546228); +#548246 = PRESENTATION_STYLE_ASSIGNMENT((#548247)); +#548247 = SURFACE_STYLE_USAGE(.BOTH.,#548248); +#548248 = SURFACE_SIDE_STYLE('',(#548249)); +#548249 = SURFACE_STYLE_FILL_AREA(#548250); +#548250 = FILL_AREA_STYLE('',(#548251)); +#548251 = FILL_AREA_STYLE_COLOUR('',#546242); +#548252 = OVER_RIDING_STYLED_ITEM('overriding color',(#548253),#115212, + #546228); +#548253 = PRESENTATION_STYLE_ASSIGNMENT((#548254)); +#548254 = SURFACE_STYLE_USAGE(.BOTH.,#548255); +#548255 = SURFACE_SIDE_STYLE('',(#548256)); +#548256 = SURFACE_STYLE_FILL_AREA(#548257); +#548257 = FILL_AREA_STYLE('',(#548258)); +#548258 = FILL_AREA_STYLE_COLOUR('',#546242); +#548259 = OVER_RIDING_STYLED_ITEM('overriding color',(#548260),#115248, + #546228); +#548260 = PRESENTATION_STYLE_ASSIGNMENT((#548261)); +#548261 = SURFACE_STYLE_USAGE(.BOTH.,#548262); +#548262 = SURFACE_SIDE_STYLE('',(#548263)); +#548263 = SURFACE_STYLE_FILL_AREA(#548264); +#548264 = FILL_AREA_STYLE('',(#548265)); +#548265 = FILL_AREA_STYLE_COLOUR('',#546242); +#548266 = OVER_RIDING_STYLED_ITEM('overriding color',(#548267),#115294, + #546228); +#548267 = PRESENTATION_STYLE_ASSIGNMENT((#548268)); +#548268 = SURFACE_STYLE_USAGE(.BOTH.,#548269); +#548269 = SURFACE_SIDE_STYLE('',(#548270)); +#548270 = SURFACE_STYLE_FILL_AREA(#548271); +#548271 = FILL_AREA_STYLE('',(#548272)); +#548272 = FILL_AREA_STYLE_COLOUR('',#546242); +#548273 = OVER_RIDING_STYLED_ITEM('overriding color',(#548274),#115312, + #546228); +#548274 = PRESENTATION_STYLE_ASSIGNMENT((#548275)); +#548275 = SURFACE_STYLE_USAGE(.BOTH.,#548276); +#548276 = SURFACE_SIDE_STYLE('',(#548277)); +#548277 = SURFACE_STYLE_FILL_AREA(#548278); +#548278 = FILL_AREA_STYLE('',(#548279)); +#548279 = FILL_AREA_STYLE_COLOUR('',#546242); +#548280 = OVER_RIDING_STYLED_ITEM('overriding color',(#548281),#115329, + #546228); +#548281 = PRESENTATION_STYLE_ASSIGNMENT((#548282)); +#548282 = SURFACE_STYLE_USAGE(.BOTH.,#548283); +#548283 = SURFACE_SIDE_STYLE('',(#548284)); +#548284 = SURFACE_STYLE_FILL_AREA(#548285); +#548285 = FILL_AREA_STYLE('',(#548286)); +#548286 = FILL_AREA_STYLE_COLOUR('',#546242); +#548287 = OVER_RIDING_STYLED_ITEM('overriding color',(#548288),#115351, + #546228); +#548288 = PRESENTATION_STYLE_ASSIGNMENT((#548289)); +#548289 = SURFACE_STYLE_USAGE(.BOTH.,#548290); +#548290 = SURFACE_SIDE_STYLE('',(#548291)); +#548291 = SURFACE_STYLE_FILL_AREA(#548292); +#548292 = FILL_AREA_STYLE('',(#548293)); +#548293 = FILL_AREA_STYLE_COLOUR('',#546242); +#548294 = OVER_RIDING_STYLED_ITEM('overriding color',(#548295),#115364, + #546228); +#548295 = PRESENTATION_STYLE_ASSIGNMENT((#548296)); +#548296 = SURFACE_STYLE_USAGE(.BOTH.,#548297); +#548297 = SURFACE_SIDE_STYLE('',(#548298)); +#548298 = SURFACE_STYLE_FILL_AREA(#548299); +#548299 = FILL_AREA_STYLE('',(#548300)); +#548300 = FILL_AREA_STYLE_COLOUR('',#546242); +#548301 = OVER_RIDING_STYLED_ITEM('overriding color',(#548302),#115382, + #546228); +#548302 = PRESENTATION_STYLE_ASSIGNMENT((#548303)); +#548303 = SURFACE_STYLE_USAGE(.BOTH.,#548304); +#548304 = SURFACE_SIDE_STYLE('',(#548305)); +#548305 = SURFACE_STYLE_FILL_AREA(#548306); +#548306 = FILL_AREA_STYLE('',(#548307)); +#548307 = FILL_AREA_STYLE_COLOUR('',#546242); +#548308 = OVER_RIDING_STYLED_ITEM('overriding color',(#548309),#115401, + #546228); +#548309 = PRESENTATION_STYLE_ASSIGNMENT((#548310)); +#548310 = SURFACE_STYLE_USAGE(.BOTH.,#548311); +#548311 = SURFACE_SIDE_STYLE('',(#548312)); +#548312 = SURFACE_STYLE_FILL_AREA(#548313); +#548313 = FILL_AREA_STYLE('',(#548314)); +#548314 = FILL_AREA_STYLE_COLOUR('',#546242); +#548315 = OVER_RIDING_STYLED_ITEM('overriding color',(#548316),#115418, + #546228); +#548316 = PRESENTATION_STYLE_ASSIGNMENT((#548317)); +#548317 = SURFACE_STYLE_USAGE(.BOTH.,#548318); +#548318 = SURFACE_SIDE_STYLE('',(#548319)); +#548319 = SURFACE_STYLE_FILL_AREA(#548320); +#548320 = FILL_AREA_STYLE('',(#548321)); +#548321 = FILL_AREA_STYLE_COLOUR('',#546242); +#548322 = OVER_RIDING_STYLED_ITEM('overriding color',(#548323),#115435, + #546228); +#548323 = PRESENTATION_STYLE_ASSIGNMENT((#548324)); +#548324 = SURFACE_STYLE_USAGE(.BOTH.,#548325); +#548325 = SURFACE_SIDE_STYLE('',(#548326)); +#548326 = SURFACE_STYLE_FILL_AREA(#548327); +#548327 = FILL_AREA_STYLE('',(#548328)); +#548328 = FILL_AREA_STYLE_COLOUR('',#546242); +#548329 = OVER_RIDING_STYLED_ITEM('overriding color',(#548330),#115452, + #546228); +#548330 = PRESENTATION_STYLE_ASSIGNMENT((#548331)); +#548331 = SURFACE_STYLE_USAGE(.BOTH.,#548332); +#548332 = SURFACE_SIDE_STYLE('',(#548333)); +#548333 = SURFACE_STYLE_FILL_AREA(#548334); +#548334 = FILL_AREA_STYLE('',(#548335)); +#548335 = FILL_AREA_STYLE_COLOUR('',#546242); +#548336 = OVER_RIDING_STYLED_ITEM('overriding color',(#548337),#115471, + #546228); +#548337 = PRESENTATION_STYLE_ASSIGNMENT((#548338)); +#548338 = SURFACE_STYLE_USAGE(.BOTH.,#548339); +#548339 = SURFACE_SIDE_STYLE('',(#548340)); +#548340 = SURFACE_STYLE_FILL_AREA(#548341); +#548341 = FILL_AREA_STYLE('',(#548342)); +#548342 = FILL_AREA_STYLE_COLOUR('',#546242); +#548343 = OVER_RIDING_STYLED_ITEM('overriding color',(#548344),#115484, + #546228); +#548344 = PRESENTATION_STYLE_ASSIGNMENT((#548345)); +#548345 = SURFACE_STYLE_USAGE(.BOTH.,#548346); +#548346 = SURFACE_SIDE_STYLE('',(#548347)); +#548347 = SURFACE_STYLE_FILL_AREA(#548348); +#548348 = FILL_AREA_STYLE('',(#548349)); +#548349 = FILL_AREA_STYLE_COLOUR('',#546242); +#548350 = OVER_RIDING_STYLED_ITEM('overriding color',(#548351),#115518, + #546228); +#548351 = PRESENTATION_STYLE_ASSIGNMENT((#548352)); +#548352 = SURFACE_STYLE_USAGE(.BOTH.,#548353); +#548353 = SURFACE_SIDE_STYLE('',(#548354)); +#548354 = SURFACE_STYLE_FILL_AREA(#548355); +#548355 = FILL_AREA_STYLE('',(#548356)); +#548356 = FILL_AREA_STYLE_COLOUR('',#546242); +#548357 = OVER_RIDING_STYLED_ITEM('overriding color',(#548358),#115571, + #546228); +#548358 = PRESENTATION_STYLE_ASSIGNMENT((#548359)); +#548359 = SURFACE_STYLE_USAGE(.BOTH.,#548360); +#548360 = SURFACE_SIDE_STYLE('',(#548361)); +#548361 = SURFACE_STYLE_FILL_AREA(#548362); +#548362 = FILL_AREA_STYLE('',(#548363)); +#548363 = FILL_AREA_STYLE_COLOUR('',#546242); +#548364 = OVER_RIDING_STYLED_ITEM('overriding color',(#548365),#115624, + #546228); +#548365 = PRESENTATION_STYLE_ASSIGNMENT((#548366)); +#548366 = SURFACE_STYLE_USAGE(.BOTH.,#548367); +#548367 = SURFACE_SIDE_STYLE('',(#548368)); +#548368 = SURFACE_STYLE_FILL_AREA(#548369); +#548369 = FILL_AREA_STYLE('',(#548370)); +#548370 = FILL_AREA_STYLE_COLOUR('',#546242); +#548371 = OVER_RIDING_STYLED_ITEM('overriding color',(#548372),#115659, + #546228); +#548372 = PRESENTATION_STYLE_ASSIGNMENT((#548373)); +#548373 = SURFACE_STYLE_USAGE(.BOTH.,#548374); +#548374 = SURFACE_SIDE_STYLE('',(#548375)); +#548375 = SURFACE_STYLE_FILL_AREA(#548376); +#548376 = FILL_AREA_STYLE('',(#548377)); +#548377 = FILL_AREA_STYLE_COLOUR('',#546242); +#548378 = OVER_RIDING_STYLED_ITEM('overriding color',(#548379),#115690, + #546228); +#548379 = PRESENTATION_STYLE_ASSIGNMENT((#548380)); +#548380 = SURFACE_STYLE_USAGE(.BOTH.,#548381); +#548381 = SURFACE_SIDE_STYLE('',(#548382)); +#548382 = SURFACE_STYLE_FILL_AREA(#548383); +#548383 = FILL_AREA_STYLE('',(#548384)); +#548384 = FILL_AREA_STYLE_COLOUR('',#546242); +#548385 = OVER_RIDING_STYLED_ITEM('overriding color',(#548386),#115707, + #546228); +#548386 = PRESENTATION_STYLE_ASSIGNMENT((#548387)); +#548387 = SURFACE_STYLE_USAGE(.BOTH.,#548388); +#548388 = SURFACE_SIDE_STYLE('',(#548389)); +#548389 = SURFACE_STYLE_FILL_AREA(#548390); +#548390 = FILL_AREA_STYLE('',(#548391)); +#548391 = FILL_AREA_STYLE_COLOUR('',#546242); +#548392 = OVER_RIDING_STYLED_ITEM('overriding color',(#548393),#115724, + #546228); +#548393 = PRESENTATION_STYLE_ASSIGNMENT((#548394)); +#548394 = SURFACE_STYLE_USAGE(.BOTH.,#548395); +#548395 = SURFACE_SIDE_STYLE('',(#548396)); +#548396 = SURFACE_STYLE_FILL_AREA(#548397); +#548397 = FILL_AREA_STYLE('',(#548398)); +#548398 = FILL_AREA_STYLE_COLOUR('',#546242); +#548399 = OVER_RIDING_STYLED_ITEM('overriding color',(#548400),#115741, + #546228); +#548400 = PRESENTATION_STYLE_ASSIGNMENT((#548401)); +#548401 = SURFACE_STYLE_USAGE(.BOTH.,#548402); +#548402 = SURFACE_SIDE_STYLE('',(#548403)); +#548403 = SURFACE_STYLE_FILL_AREA(#548404); +#548404 = FILL_AREA_STYLE('',(#548405)); +#548405 = FILL_AREA_STYLE_COLOUR('',#546242); +#548406 = OVER_RIDING_STYLED_ITEM('overriding color',(#548407),#115767, + #546228); +#548407 = PRESENTATION_STYLE_ASSIGNMENT((#548408)); +#548408 = SURFACE_STYLE_USAGE(.BOTH.,#548409); +#548409 = SURFACE_SIDE_STYLE('',(#548410)); +#548410 = SURFACE_STYLE_FILL_AREA(#548411); +#548411 = FILL_AREA_STYLE('',(#548412)); +#548412 = FILL_AREA_STYLE_COLOUR('',#546242); +#548413 = OVER_RIDING_STYLED_ITEM('overriding color',(#548414),#115801, + #546228); +#548414 = PRESENTATION_STYLE_ASSIGNMENT((#548415)); +#548415 = SURFACE_STYLE_USAGE(.BOTH.,#548416); +#548416 = SURFACE_SIDE_STYLE('',(#548417)); +#548417 = SURFACE_STYLE_FILL_AREA(#548418); +#548418 = FILL_AREA_STYLE('',(#548419)); +#548419 = FILL_AREA_STYLE_COLOUR('',#546242); +#548420 = OVER_RIDING_STYLED_ITEM('overriding color',(#548421),#115832, + #546228); +#548421 = PRESENTATION_STYLE_ASSIGNMENT((#548422)); +#548422 = SURFACE_STYLE_USAGE(.BOTH.,#548423); +#548423 = SURFACE_SIDE_STYLE('',(#548424)); +#548424 = SURFACE_STYLE_FILL_AREA(#548425); +#548425 = FILL_AREA_STYLE('',(#548426)); +#548426 = FILL_AREA_STYLE_COLOUR('',#546242); +#548427 = OVER_RIDING_STYLED_ITEM('overriding color',(#548428),#115872, + #546228); +#548428 = PRESENTATION_STYLE_ASSIGNMENT((#548429)); +#548429 = SURFACE_STYLE_USAGE(.BOTH.,#548430); +#548430 = SURFACE_SIDE_STYLE('',(#548431)); +#548431 = SURFACE_STYLE_FILL_AREA(#548432); +#548432 = FILL_AREA_STYLE('',(#548433)); +#548433 = FILL_AREA_STYLE_COLOUR('',#546242); +#548434 = OVER_RIDING_STYLED_ITEM('overriding color',(#548435),#115897, + #546228); +#548435 = PRESENTATION_STYLE_ASSIGNMENT((#548436)); +#548436 = SURFACE_STYLE_USAGE(.BOTH.,#548437); +#548437 = SURFACE_SIDE_STYLE('',(#548438)); +#548438 = SURFACE_STYLE_FILL_AREA(#548439); +#548439 = FILL_AREA_STYLE('',(#548440)); +#548440 = FILL_AREA_STYLE_COLOUR('',#546242); +#548441 = OVER_RIDING_STYLED_ITEM('overriding color',(#548442),#116142, + #546228); +#548442 = PRESENTATION_STYLE_ASSIGNMENT((#548443)); +#548443 = SURFACE_STYLE_USAGE(.BOTH.,#548444); +#548444 = SURFACE_SIDE_STYLE('',(#548445)); +#548445 = SURFACE_STYLE_FILL_AREA(#548446); +#548446 = FILL_AREA_STYLE('',(#548447)); +#548447 = FILL_AREA_STYLE_COLOUR('',#546242); +#548448 = OVER_RIDING_STYLED_ITEM('overriding color',(#548449),#116173, + #546228); +#548449 = PRESENTATION_STYLE_ASSIGNMENT((#548450)); +#548450 = SURFACE_STYLE_USAGE(.BOTH.,#548451); +#548451 = SURFACE_SIDE_STYLE('',(#548452)); +#548452 = SURFACE_STYLE_FILL_AREA(#548453); +#548453 = FILL_AREA_STYLE('',(#548454)); +#548454 = FILL_AREA_STYLE_COLOUR('',#546242); +#548455 = OVER_RIDING_STYLED_ITEM('overriding color',(#548456),#116461, + #546228); +#548456 = PRESENTATION_STYLE_ASSIGNMENT((#548457)); +#548457 = SURFACE_STYLE_USAGE(.BOTH.,#548458); +#548458 = SURFACE_SIDE_STYLE('',(#548459)); +#548459 = SURFACE_STYLE_FILL_AREA(#548460); +#548460 = FILL_AREA_STYLE('',(#548461)); +#548461 = FILL_AREA_STYLE_COLOUR('',#546242); +#548462 = OVER_RIDING_STYLED_ITEM('overriding color',(#548463),#116483, + #546228); +#548463 = PRESENTATION_STYLE_ASSIGNMENT((#548464)); +#548464 = SURFACE_STYLE_USAGE(.BOTH.,#548465); +#548465 = SURFACE_SIDE_STYLE('',(#548466)); +#548466 = SURFACE_STYLE_FILL_AREA(#548467); +#548467 = FILL_AREA_STYLE('',(#548468)); +#548468 = FILL_AREA_STYLE_COLOUR('',#546242); +#548469 = OVER_RIDING_STYLED_ITEM('overriding color',(#548470),#116505, + #546228); +#548470 = PRESENTATION_STYLE_ASSIGNMENT((#548471)); +#548471 = SURFACE_STYLE_USAGE(.BOTH.,#548472); +#548472 = SURFACE_SIDE_STYLE('',(#548473)); +#548473 = SURFACE_STYLE_FILL_AREA(#548474); +#548474 = FILL_AREA_STYLE('',(#548475)); +#548475 = FILL_AREA_STYLE_COLOUR('',#546242); +#548476 = OVER_RIDING_STYLED_ITEM('overriding color',(#548477),#116517, + #546228); +#548477 = PRESENTATION_STYLE_ASSIGNMENT((#548478)); +#548478 = SURFACE_STYLE_USAGE(.BOTH.,#548479); +#548479 = SURFACE_SIDE_STYLE('',(#548480)); +#548480 = SURFACE_STYLE_FILL_AREA(#548481); +#548481 = FILL_AREA_STYLE('',(#548482)); +#548482 = FILL_AREA_STYLE_COLOUR('',#546242); +#548483 = OVER_RIDING_STYLED_ITEM('overriding color',(#548484),#116534, + #546228); +#548484 = PRESENTATION_STYLE_ASSIGNMENT((#548485)); +#548485 = SURFACE_STYLE_USAGE(.BOTH.,#548486); +#548486 = SURFACE_SIDE_STYLE('',(#548487)); +#548487 = SURFACE_STYLE_FILL_AREA(#548488); +#548488 = FILL_AREA_STYLE('',(#548489)); +#548489 = FILL_AREA_STYLE_COLOUR('',#546242); +#548490 = OVER_RIDING_STYLED_ITEM('overriding color',(#548491),#116551, + #546228); +#548491 = PRESENTATION_STYLE_ASSIGNMENT((#548492)); +#548492 = SURFACE_STYLE_USAGE(.BOTH.,#548493); +#548493 = SURFACE_SIDE_STYLE('',(#548494)); +#548494 = SURFACE_STYLE_FILL_AREA(#548495); +#548495 = FILL_AREA_STYLE('',(#548496)); +#548496 = FILL_AREA_STYLE_COLOUR('',#546242); +#548497 = OVER_RIDING_STYLED_ITEM('overriding color',(#548498),#116593, + #546228); +#548498 = PRESENTATION_STYLE_ASSIGNMENT((#548499)); +#548499 = SURFACE_STYLE_USAGE(.BOTH.,#548500); +#548500 = SURFACE_SIDE_STYLE('',(#548501)); +#548501 = SURFACE_STYLE_FILL_AREA(#548502); +#548502 = FILL_AREA_STYLE('',(#548503)); +#548503 = FILL_AREA_STYLE_COLOUR('',#546242); +#548504 = OVER_RIDING_STYLED_ITEM('overriding color',(#548505),#116626, + #546228); +#548505 = PRESENTATION_STYLE_ASSIGNMENT((#548506)); +#548506 = SURFACE_STYLE_USAGE(.BOTH.,#548507); +#548507 = SURFACE_SIDE_STYLE('',(#548508)); +#548508 = SURFACE_STYLE_FILL_AREA(#548509); +#548509 = FILL_AREA_STYLE('',(#548510)); +#548510 = FILL_AREA_STYLE_COLOUR('',#546242); +#548511 = OVER_RIDING_STYLED_ITEM('overriding color',(#548512),#116675, + #546228); +#548512 = PRESENTATION_STYLE_ASSIGNMENT((#548513)); +#548513 = SURFACE_STYLE_USAGE(.BOTH.,#548514); +#548514 = SURFACE_SIDE_STYLE('',(#548515)); +#548515 = SURFACE_STYLE_FILL_AREA(#548516); +#548516 = FILL_AREA_STYLE('',(#548517)); +#548517 = FILL_AREA_STYLE_COLOUR('',#546242); +#548518 = OVER_RIDING_STYLED_ITEM('overriding color',(#548519),#116709, + #546228); +#548519 = PRESENTATION_STYLE_ASSIGNMENT((#548520)); +#548520 = SURFACE_STYLE_USAGE(.BOTH.,#548521); +#548521 = SURFACE_SIDE_STYLE('',(#548522)); +#548522 = SURFACE_STYLE_FILL_AREA(#548523); +#548523 = FILL_AREA_STYLE('',(#548524)); +#548524 = FILL_AREA_STYLE_COLOUR('',#546242); +#548525 = OVER_RIDING_STYLED_ITEM('overriding color',(#548526),#116741, + #546228); +#548526 = PRESENTATION_STYLE_ASSIGNMENT((#548527)); +#548527 = SURFACE_STYLE_USAGE(.BOTH.,#548528); +#548528 = SURFACE_SIDE_STYLE('',(#548529)); +#548529 = SURFACE_STYLE_FILL_AREA(#548530); +#548530 = FILL_AREA_STYLE('',(#548531)); +#548531 = FILL_AREA_STYLE_COLOUR('',#546242); +#548532 = OVER_RIDING_STYLED_ITEM('overriding color',(#548533),#116765, + #546228); +#548533 = PRESENTATION_STYLE_ASSIGNMENT((#548534)); +#548534 = SURFACE_STYLE_USAGE(.BOTH.,#548535); +#548535 = SURFACE_SIDE_STYLE('',(#548536)); +#548536 = SURFACE_STYLE_FILL_AREA(#548537); +#548537 = FILL_AREA_STYLE('',(#548538)); +#548538 = FILL_AREA_STYLE_COLOUR('',#546242); +#548539 = OVER_RIDING_STYLED_ITEM('overriding color',(#548540),#116790, + #546228); +#548540 = PRESENTATION_STYLE_ASSIGNMENT((#548541)); +#548541 = SURFACE_STYLE_USAGE(.BOTH.,#548542); +#548542 = SURFACE_SIDE_STYLE('',(#548543)); +#548543 = SURFACE_STYLE_FILL_AREA(#548544); +#548544 = FILL_AREA_STYLE('',(#548545)); +#548545 = FILL_AREA_STYLE_COLOUR('',#546242); +#548546 = OVER_RIDING_STYLED_ITEM('overriding color',(#548547),#116824, + #546228); +#548547 = PRESENTATION_STYLE_ASSIGNMENT((#548548)); +#548548 = SURFACE_STYLE_USAGE(.BOTH.,#548549); +#548549 = SURFACE_SIDE_STYLE('',(#548550)); +#548550 = SURFACE_STYLE_FILL_AREA(#548551); +#548551 = FILL_AREA_STYLE('',(#548552)); +#548552 = FILL_AREA_STYLE_COLOUR('',#546242); +#548553 = OVER_RIDING_STYLED_ITEM('overriding color',(#548554),#116849, + #546228); +#548554 = PRESENTATION_STYLE_ASSIGNMENT((#548555)); +#548555 = SURFACE_STYLE_USAGE(.BOTH.,#548556); +#548556 = SURFACE_SIDE_STYLE('',(#548557)); +#548557 = SURFACE_STYLE_FILL_AREA(#548558); +#548558 = FILL_AREA_STYLE('',(#548559)); +#548559 = FILL_AREA_STYLE_COLOUR('',#546242); +#548560 = OVER_RIDING_STYLED_ITEM('overriding color',(#548561),#116866, + #546228); +#548561 = PRESENTATION_STYLE_ASSIGNMENT((#548562)); +#548562 = SURFACE_STYLE_USAGE(.BOTH.,#548563); +#548563 = SURFACE_SIDE_STYLE('',(#548564)); +#548564 = SURFACE_STYLE_FILL_AREA(#548565); +#548565 = FILL_AREA_STYLE('',(#548566)); +#548566 = FILL_AREA_STYLE_COLOUR('',#546242); +#548567 = OVER_RIDING_STYLED_ITEM('overriding color',(#548568),#116888, + #546228); +#548568 = PRESENTATION_STYLE_ASSIGNMENT((#548569)); +#548569 = SURFACE_STYLE_USAGE(.BOTH.,#548570); +#548570 = SURFACE_SIDE_STYLE('',(#548571)); +#548571 = SURFACE_STYLE_FILL_AREA(#548572); +#548572 = FILL_AREA_STYLE('',(#548573)); +#548573 = FILL_AREA_STYLE_COLOUR('',#546242); +#548574 = OVER_RIDING_STYLED_ITEM('overriding color',(#548575),#116905, + #546228); +#548575 = PRESENTATION_STYLE_ASSIGNMENT((#548576)); +#548576 = SURFACE_STYLE_USAGE(.BOTH.,#548577); +#548577 = SURFACE_SIDE_STYLE('',(#548578)); +#548578 = SURFACE_STYLE_FILL_AREA(#548579); +#548579 = FILL_AREA_STYLE('',(#548580)); +#548580 = FILL_AREA_STYLE_COLOUR('',#546242); +#548581 = OVER_RIDING_STYLED_ITEM('overriding color',(#548582),#116922, + #546228); +#548582 = PRESENTATION_STYLE_ASSIGNMENT((#548583)); +#548583 = SURFACE_STYLE_USAGE(.BOTH.,#548584); +#548584 = SURFACE_SIDE_STYLE('',(#548585)); +#548585 = SURFACE_STYLE_FILL_AREA(#548586); +#548586 = FILL_AREA_STYLE('',(#548587)); +#548587 = FILL_AREA_STYLE_COLOUR('',#546242); +#548588 = OVER_RIDING_STYLED_ITEM('overriding color',(#548589),#116939, + #546228); +#548589 = PRESENTATION_STYLE_ASSIGNMENT((#548590)); +#548590 = SURFACE_STYLE_USAGE(.BOTH.,#548591); +#548591 = SURFACE_SIDE_STYLE('',(#548592)); +#548592 = SURFACE_STYLE_FILL_AREA(#548593); +#548593 = FILL_AREA_STYLE('',(#548594)); +#548594 = FILL_AREA_STYLE_COLOUR('',#546242); +#548595 = OVER_RIDING_STYLED_ITEM('overriding color',(#548596),#116956, + #546228); +#548596 = PRESENTATION_STYLE_ASSIGNMENT((#548597)); +#548597 = SURFACE_STYLE_USAGE(.BOTH.,#548598); +#548598 = SURFACE_SIDE_STYLE('',(#548599)); +#548599 = SURFACE_STYLE_FILL_AREA(#548600); +#548600 = FILL_AREA_STYLE('',(#548601)); +#548601 = FILL_AREA_STYLE_COLOUR('',#546242); +#548602 = OVER_RIDING_STYLED_ITEM('overriding color',(#548603),#116973, + #546228); +#548603 = PRESENTATION_STYLE_ASSIGNMENT((#548604)); +#548604 = SURFACE_STYLE_USAGE(.BOTH.,#548605); +#548605 = SURFACE_SIDE_STYLE('',(#548606)); +#548606 = SURFACE_STYLE_FILL_AREA(#548607); +#548607 = FILL_AREA_STYLE('',(#548608)); +#548608 = FILL_AREA_STYLE_COLOUR('',#546242); +#548609 = OVER_RIDING_STYLED_ITEM('overriding color',(#548610),#116985, + #546228); +#548610 = PRESENTATION_STYLE_ASSIGNMENT((#548611)); +#548611 = SURFACE_STYLE_USAGE(.BOTH.,#548612); +#548612 = SURFACE_SIDE_STYLE('',(#548613)); +#548613 = SURFACE_STYLE_FILL_AREA(#548614); +#548614 = FILL_AREA_STYLE('',(#548615)); +#548615 = FILL_AREA_STYLE_COLOUR('',#546242); +#548616 = OVER_RIDING_STYLED_ITEM('overriding color',(#548617),#117012, + #546228); +#548617 = PRESENTATION_STYLE_ASSIGNMENT((#548618)); +#548618 = SURFACE_STYLE_USAGE(.BOTH.,#548619); +#548619 = SURFACE_SIDE_STYLE('',(#548620)); +#548620 = SURFACE_STYLE_FILL_AREA(#548621); +#548621 = FILL_AREA_STYLE('',(#548622)); +#548622 = FILL_AREA_STYLE_COLOUR('',#546242); +#548623 = OVER_RIDING_STYLED_ITEM('overriding color',(#548624),#117046, + #546228); +#548624 = PRESENTATION_STYLE_ASSIGNMENT((#548625)); +#548625 = SURFACE_STYLE_USAGE(.BOTH.,#548626); +#548626 = SURFACE_SIDE_STYLE('',(#548627)); +#548627 = SURFACE_STYLE_FILL_AREA(#548628); +#548628 = FILL_AREA_STYLE('',(#548629)); +#548629 = FILL_AREA_STYLE_COLOUR('',#546242); +#548630 = OVER_RIDING_STYLED_ITEM('overriding color',(#548631),#117071, + #546228); +#548631 = PRESENTATION_STYLE_ASSIGNMENT((#548632)); +#548632 = SURFACE_STYLE_USAGE(.BOTH.,#548633); +#548633 = SURFACE_SIDE_STYLE('',(#548634)); +#548634 = SURFACE_STYLE_FILL_AREA(#548635); +#548635 = FILL_AREA_STYLE('',(#548636)); +#548636 = FILL_AREA_STYLE_COLOUR('',#546242); +#548637 = OVER_RIDING_STYLED_ITEM('overriding color',(#548638),#117088, + #546228); +#548638 = PRESENTATION_STYLE_ASSIGNMENT((#548639)); +#548639 = SURFACE_STYLE_USAGE(.BOTH.,#548640); +#548640 = SURFACE_SIDE_STYLE('',(#548641)); +#548641 = SURFACE_STYLE_FILL_AREA(#548642); +#548642 = FILL_AREA_STYLE('',(#548643)); +#548643 = FILL_AREA_STYLE_COLOUR('',#546242); +#548644 = OVER_RIDING_STYLED_ITEM('overriding color',(#548645),#117114, + #546228); +#548645 = PRESENTATION_STYLE_ASSIGNMENT((#548646)); +#548646 = SURFACE_STYLE_USAGE(.BOTH.,#548647); +#548647 = SURFACE_SIDE_STYLE('',(#548648)); +#548648 = SURFACE_STYLE_FILL_AREA(#548649); +#548649 = FILL_AREA_STYLE('',(#548650)); +#548650 = FILL_AREA_STYLE_COLOUR('',#546242); +#548651 = OVER_RIDING_STYLED_ITEM('overriding color',(#548652),#117133, + #546228); +#548652 = PRESENTATION_STYLE_ASSIGNMENT((#548653)); +#548653 = SURFACE_STYLE_USAGE(.BOTH.,#548654); +#548654 = SURFACE_SIDE_STYLE('',(#548655)); +#548655 = SURFACE_STYLE_FILL_AREA(#548656); +#548656 = FILL_AREA_STYLE('',(#548657)); +#548657 = FILL_AREA_STYLE_COLOUR('',#546242); +#548658 = OVER_RIDING_STYLED_ITEM('overriding color',(#548659),#117152, + #546228); +#548659 = PRESENTATION_STYLE_ASSIGNMENT((#548660)); +#548660 = SURFACE_STYLE_USAGE(.BOTH.,#548661); +#548661 = SURFACE_SIDE_STYLE('',(#548662)); +#548662 = SURFACE_STYLE_FILL_AREA(#548663); +#548663 = FILL_AREA_STYLE('',(#548664)); +#548664 = FILL_AREA_STYLE_COLOUR('',#546242); +#548665 = OVER_RIDING_STYLED_ITEM('overriding color',(#548666),#117172, + #546228); +#548666 = PRESENTATION_STYLE_ASSIGNMENT((#548667)); +#548667 = SURFACE_STYLE_USAGE(.BOTH.,#548668); +#548668 = SURFACE_SIDE_STYLE('',(#548669)); +#548669 = SURFACE_STYLE_FILL_AREA(#548670); +#548670 = FILL_AREA_STYLE('',(#548671)); +#548671 = FILL_AREA_STYLE_COLOUR('',#546242); +#548672 = OVER_RIDING_STYLED_ITEM('overriding color',(#548673),#117184, + #546228); +#548673 = PRESENTATION_STYLE_ASSIGNMENT((#548674)); +#548674 = SURFACE_STYLE_USAGE(.BOTH.,#548675); +#548675 = SURFACE_SIDE_STYLE('',(#548676)); +#548676 = SURFACE_STYLE_FILL_AREA(#548677); +#548677 = FILL_AREA_STYLE('',(#548678)); +#548678 = FILL_AREA_STYLE_COLOUR('',#546242); +#548679 = OVER_RIDING_STYLED_ITEM('overriding color',(#548680),#117197, + #546228); +#548680 = PRESENTATION_STYLE_ASSIGNMENT((#548681)); +#548681 = SURFACE_STYLE_USAGE(.BOTH.,#548682); +#548682 = SURFACE_SIDE_STYLE('',(#548683)); +#548683 = SURFACE_STYLE_FILL_AREA(#548684); +#548684 = FILL_AREA_STYLE('',(#548685)); +#548685 = FILL_AREA_STYLE_COLOUR('',#546242); +#548686 = OVER_RIDING_STYLED_ITEM('overriding color',(#548687),#117214, + #546228); +#548687 = PRESENTATION_STYLE_ASSIGNMENT((#548688)); +#548688 = SURFACE_STYLE_USAGE(.BOTH.,#548689); +#548689 = SURFACE_SIDE_STYLE('',(#548690)); +#548690 = SURFACE_STYLE_FILL_AREA(#548691); +#548691 = FILL_AREA_STYLE('',(#548692)); +#548692 = FILL_AREA_STYLE_COLOUR('',#546242); +#548693 = OVER_RIDING_STYLED_ITEM('overriding color',(#548694),#117231, + #546228); +#548694 = PRESENTATION_STYLE_ASSIGNMENT((#548695)); +#548695 = SURFACE_STYLE_USAGE(.BOTH.,#548696); +#548696 = SURFACE_SIDE_STYLE('',(#548697)); +#548697 = SURFACE_STYLE_FILL_AREA(#548698); +#548698 = FILL_AREA_STYLE('',(#548699)); +#548699 = FILL_AREA_STYLE_COLOUR('',#546242); +#548700 = OVER_RIDING_STYLED_ITEM('overriding color',(#548701),#117248, + #546228); +#548701 = PRESENTATION_STYLE_ASSIGNMENT((#548702)); +#548702 = SURFACE_STYLE_USAGE(.BOTH.,#548703); +#548703 = SURFACE_SIDE_STYLE('',(#548704)); +#548704 = SURFACE_STYLE_FILL_AREA(#548705); +#548705 = FILL_AREA_STYLE('',(#548706)); +#548706 = FILL_AREA_STYLE_COLOUR('',#546242); +#548707 = OVER_RIDING_STYLED_ITEM('overriding color',(#548708),#117265, + #546228); +#548708 = PRESENTATION_STYLE_ASSIGNMENT((#548709)); +#548709 = SURFACE_STYLE_USAGE(.BOTH.,#548710); +#548710 = SURFACE_SIDE_STYLE('',(#548711)); +#548711 = SURFACE_STYLE_FILL_AREA(#548712); +#548712 = FILL_AREA_STYLE('',(#548713)); +#548713 = FILL_AREA_STYLE_COLOUR('',#546242); +#548714 = OVER_RIDING_STYLED_ITEM('overriding color',(#548715),#117282, + #546228); +#548715 = PRESENTATION_STYLE_ASSIGNMENT((#548716)); +#548716 = SURFACE_STYLE_USAGE(.BOTH.,#548717); +#548717 = SURFACE_SIDE_STYLE('',(#548718)); +#548718 = SURFACE_STYLE_FILL_AREA(#548719); +#548719 = FILL_AREA_STYLE('',(#548720)); +#548720 = FILL_AREA_STYLE_COLOUR('',#546242); +#548721 = OVER_RIDING_STYLED_ITEM('overriding color',(#548722),#117294, + #546228); +#548722 = PRESENTATION_STYLE_ASSIGNMENT((#548723)); +#548723 = SURFACE_STYLE_USAGE(.BOTH.,#548724); +#548724 = SURFACE_SIDE_STYLE('',(#548725)); +#548725 = SURFACE_STYLE_FILL_AREA(#548726); +#548726 = FILL_AREA_STYLE('',(#548727)); +#548727 = FILL_AREA_STYLE_COLOUR('',#546242); +#548728 = OVER_RIDING_STYLED_ITEM('overriding color',(#548729),#117311, + #546228); +#548729 = PRESENTATION_STYLE_ASSIGNMENT((#548730)); +#548730 = SURFACE_STYLE_USAGE(.BOTH.,#548731); +#548731 = SURFACE_SIDE_STYLE('',(#548732)); +#548732 = SURFACE_STYLE_FILL_AREA(#548733); +#548733 = FILL_AREA_STYLE('',(#548734)); +#548734 = FILL_AREA_STYLE_COLOUR('',#546242); +#548735 = OVER_RIDING_STYLED_ITEM('overriding color',(#548736),#117323, + #546228); +#548736 = PRESENTATION_STYLE_ASSIGNMENT((#548737)); +#548737 = SURFACE_STYLE_USAGE(.BOTH.,#548738); +#548738 = SURFACE_SIDE_STYLE('',(#548739)); +#548739 = SURFACE_STYLE_FILL_AREA(#548740); +#548740 = FILL_AREA_STYLE('',(#548741)); +#548741 = FILL_AREA_STYLE_COLOUR('',#546242); +#548742 = OVER_RIDING_STYLED_ITEM('overriding color',(#548743),#117347, + #546228); +#548743 = PRESENTATION_STYLE_ASSIGNMENT((#548744)); +#548744 = SURFACE_STYLE_USAGE(.BOTH.,#548745); +#548745 = SURFACE_SIDE_STYLE('',(#548746)); +#548746 = SURFACE_STYLE_FILL_AREA(#548747); +#548747 = FILL_AREA_STYLE('',(#548748)); +#548748 = FILL_AREA_STYLE_COLOUR('',#546242); +#548749 = OVER_RIDING_STYLED_ITEM('overriding color',(#548750),#117364, + #546228); +#548750 = PRESENTATION_STYLE_ASSIGNMENT((#548751)); +#548751 = SURFACE_STYLE_USAGE(.BOTH.,#548752); +#548752 = SURFACE_SIDE_STYLE('',(#548753)); +#548753 = SURFACE_STYLE_FILL_AREA(#548754); +#548754 = FILL_AREA_STYLE('',(#548755)); +#548755 = FILL_AREA_STYLE_COLOUR('',#546242); +#548756 = OVER_RIDING_STYLED_ITEM('overriding color',(#548757),#117381, + #546228); +#548757 = PRESENTATION_STYLE_ASSIGNMENT((#548758)); +#548758 = SURFACE_STYLE_USAGE(.BOTH.,#548759); +#548759 = SURFACE_SIDE_STYLE('',(#548760)); +#548760 = SURFACE_STYLE_FILL_AREA(#548761); +#548761 = FILL_AREA_STYLE('',(#548762)); +#548762 = FILL_AREA_STYLE_COLOUR('',#546242); +#548763 = OVER_RIDING_STYLED_ITEM('overriding color',(#548764),#117398, + #546228); +#548764 = PRESENTATION_STYLE_ASSIGNMENT((#548765)); +#548765 = SURFACE_STYLE_USAGE(.BOTH.,#548766); +#548766 = SURFACE_SIDE_STYLE('',(#548767)); +#548767 = SURFACE_STYLE_FILL_AREA(#548768); +#548768 = FILL_AREA_STYLE('',(#548769)); +#548769 = FILL_AREA_STYLE_COLOUR('',#546242); +#548770 = OVER_RIDING_STYLED_ITEM('overriding color',(#548771),#117417, + #546228); +#548771 = PRESENTATION_STYLE_ASSIGNMENT((#548772)); +#548772 = SURFACE_STYLE_USAGE(.BOTH.,#548773); +#548773 = SURFACE_SIDE_STYLE('',(#548774)); +#548774 = SURFACE_STYLE_FILL_AREA(#548775); +#548775 = FILL_AREA_STYLE('',(#548776)); +#548776 = FILL_AREA_STYLE_COLOUR('',#546242); +#548777 = OVER_RIDING_STYLED_ITEM('overriding color',(#548778),#117430, + #546228); +#548778 = PRESENTATION_STYLE_ASSIGNMENT((#548779)); +#548779 = SURFACE_STYLE_USAGE(.BOTH.,#548780); +#548780 = SURFACE_SIDE_STYLE('',(#548781)); +#548781 = SURFACE_STYLE_FILL_AREA(#548782); +#548782 = FILL_AREA_STYLE('',(#548783)); +#548783 = FILL_AREA_STYLE_COLOUR('',#546242); +#548784 = OVER_RIDING_STYLED_ITEM('overriding color',(#548785),#117443, + #546228); +#548785 = PRESENTATION_STYLE_ASSIGNMENT((#548786)); +#548786 = SURFACE_STYLE_USAGE(.BOTH.,#548787); +#548787 = SURFACE_SIDE_STYLE('',(#548788)); +#548788 = SURFACE_STYLE_FILL_AREA(#548789); +#548789 = FILL_AREA_STYLE('',(#548790)); +#548790 = FILL_AREA_STYLE_COLOUR('',#546242); +#548791 = OVER_RIDING_STYLED_ITEM('overriding color',(#548792),#117467, + #546228); +#548792 = PRESENTATION_STYLE_ASSIGNMENT((#548793)); +#548793 = SURFACE_STYLE_USAGE(.BOTH.,#548794); +#548794 = SURFACE_SIDE_STYLE('',(#548795)); +#548795 = SURFACE_STYLE_FILL_AREA(#548796); +#548796 = FILL_AREA_STYLE('',(#548797)); +#548797 = FILL_AREA_STYLE_COLOUR('',#546242); +#548798 = OVER_RIDING_STYLED_ITEM('overriding color',(#548799),#117514, + #546228); +#548799 = PRESENTATION_STYLE_ASSIGNMENT((#548800)); +#548800 = SURFACE_STYLE_USAGE(.BOTH.,#548801); +#548801 = SURFACE_SIDE_STYLE('',(#548802)); +#548802 = SURFACE_STYLE_FILL_AREA(#548803); +#548803 = FILL_AREA_STYLE('',(#548804)); +#548804 = FILL_AREA_STYLE_COLOUR('',#546242); +#548805 = OVER_RIDING_STYLED_ITEM('overriding color',(#548806),#117567, + #546228); +#548806 = PRESENTATION_STYLE_ASSIGNMENT((#548807)); +#548807 = SURFACE_STYLE_USAGE(.BOTH.,#548808); +#548808 = SURFACE_SIDE_STYLE('',(#548809)); +#548809 = SURFACE_STYLE_FILL_AREA(#548810); +#548810 = FILL_AREA_STYLE('',(#548811)); +#548811 = FILL_AREA_STYLE_COLOUR('',#546242); +#548812 = OVER_RIDING_STYLED_ITEM('overriding color',(#548813),#117602, + #546228); +#548813 = PRESENTATION_STYLE_ASSIGNMENT((#548814)); +#548814 = SURFACE_STYLE_USAGE(.BOTH.,#548815); +#548815 = SURFACE_SIDE_STYLE('',(#548816)); +#548816 = SURFACE_STYLE_FILL_AREA(#548817); +#548817 = FILL_AREA_STYLE('',(#548818)); +#548818 = FILL_AREA_STYLE_COLOUR('',#546242); +#548819 = OVER_RIDING_STYLED_ITEM('overriding color',(#548820),#117633, + #546228); +#548820 = PRESENTATION_STYLE_ASSIGNMENT((#548821)); +#548821 = SURFACE_STYLE_USAGE(.BOTH.,#548822); +#548822 = SURFACE_SIDE_STYLE('',(#548823)); +#548823 = SURFACE_STYLE_FILL_AREA(#548824); +#548824 = FILL_AREA_STYLE('',(#548825)); +#548825 = FILL_AREA_STYLE_COLOUR('',#546242); +#548826 = OVER_RIDING_STYLED_ITEM('overriding color',(#548827),#117650, + #546228); +#548827 = PRESENTATION_STYLE_ASSIGNMENT((#548828)); +#548828 = SURFACE_STYLE_USAGE(.BOTH.,#548829); +#548829 = SURFACE_SIDE_STYLE('',(#548830)); +#548830 = SURFACE_STYLE_FILL_AREA(#548831); +#548831 = FILL_AREA_STYLE('',(#548832)); +#548832 = FILL_AREA_STYLE_COLOUR('',#546242); +#548833 = OVER_RIDING_STYLED_ITEM('overriding color',(#548834),#117667, + #546228); +#548834 = PRESENTATION_STYLE_ASSIGNMENT((#548835)); +#548835 = SURFACE_STYLE_USAGE(.BOTH.,#548836); +#548836 = SURFACE_SIDE_STYLE('',(#548837)); +#548837 = SURFACE_STYLE_FILL_AREA(#548838); +#548838 = FILL_AREA_STYLE('',(#548839)); +#548839 = FILL_AREA_STYLE_COLOUR('',#546242); +#548840 = OVER_RIDING_STYLED_ITEM('overriding color',(#548841),#117684, + #546228); +#548841 = PRESENTATION_STYLE_ASSIGNMENT((#548842)); +#548842 = SURFACE_STYLE_USAGE(.BOTH.,#548843); +#548843 = SURFACE_SIDE_STYLE('',(#548844)); +#548844 = SURFACE_STYLE_FILL_AREA(#548845); +#548845 = FILL_AREA_STYLE('',(#548846)); +#548846 = FILL_AREA_STYLE_COLOUR('',#546242); +#548847 = OVER_RIDING_STYLED_ITEM('overriding color',(#548848),#117710, + #546228); +#548848 = PRESENTATION_STYLE_ASSIGNMENT((#548849)); +#548849 = SURFACE_STYLE_USAGE(.BOTH.,#548850); +#548850 = SURFACE_SIDE_STYLE('',(#548851)); +#548851 = SURFACE_STYLE_FILL_AREA(#548852); +#548852 = FILL_AREA_STYLE('',(#548853)); +#548853 = FILL_AREA_STYLE_COLOUR('',#546242); +#548854 = OVER_RIDING_STYLED_ITEM('overriding color',(#548855),#117744, + #546228); +#548855 = PRESENTATION_STYLE_ASSIGNMENT((#548856)); +#548856 = SURFACE_STYLE_USAGE(.BOTH.,#548857); +#548857 = SURFACE_SIDE_STYLE('',(#548858)); +#548858 = SURFACE_STYLE_FILL_AREA(#548859); +#548859 = FILL_AREA_STYLE('',(#548860)); +#548860 = FILL_AREA_STYLE_COLOUR('',#546242); +#548861 = OVER_RIDING_STYLED_ITEM('overriding color',(#548862),#117775, + #546228); +#548862 = PRESENTATION_STYLE_ASSIGNMENT((#548863)); +#548863 = SURFACE_STYLE_USAGE(.BOTH.,#548864); +#548864 = SURFACE_SIDE_STYLE('',(#548865)); +#548865 = SURFACE_STYLE_FILL_AREA(#548866); +#548866 = FILL_AREA_STYLE('',(#548867)); +#548867 = FILL_AREA_STYLE_COLOUR('',#546242); +#548868 = OVER_RIDING_STYLED_ITEM('overriding color',(#548869),#117815, + #546228); +#548869 = PRESENTATION_STYLE_ASSIGNMENT((#548870)); +#548870 = SURFACE_STYLE_USAGE(.BOTH.,#548871); +#548871 = SURFACE_SIDE_STYLE('',(#548872)); +#548872 = SURFACE_STYLE_FILL_AREA(#548873); +#548873 = FILL_AREA_STYLE('',(#548874)); +#548874 = FILL_AREA_STYLE_COLOUR('',#546242); +#548875 = OVER_RIDING_STYLED_ITEM('overriding color',(#548876),#117840, + #546228); +#548876 = PRESENTATION_STYLE_ASSIGNMENT((#548877)); +#548877 = SURFACE_STYLE_USAGE(.BOTH.,#548878); +#548878 = SURFACE_SIDE_STYLE('',(#548879)); +#548879 = SURFACE_STYLE_FILL_AREA(#548880); +#548880 = FILL_AREA_STYLE('',(#548881)); +#548881 = FILL_AREA_STYLE_COLOUR('',#546242); +#548882 = OVER_RIDING_STYLED_ITEM('overriding color',(#548883),#118137, + #546228); +#548883 = PRESENTATION_STYLE_ASSIGNMENT((#548884)); +#548884 = SURFACE_STYLE_USAGE(.BOTH.,#548885); +#548885 = SURFACE_SIDE_STYLE('',(#548886)); +#548886 = SURFACE_STYLE_FILL_AREA(#548887); +#548887 = FILL_AREA_STYLE('',(#548888)); +#548888 = FILL_AREA_STYLE_COLOUR('',#546242); +#548889 = OVER_RIDING_STYLED_ITEM('overriding color',(#548890),#118168, + #546228); +#548890 = PRESENTATION_STYLE_ASSIGNMENT((#548891)); +#548891 = SURFACE_STYLE_USAGE(.BOTH.,#548892); +#548892 = SURFACE_SIDE_STYLE('',(#548893)); +#548893 = SURFACE_STYLE_FILL_AREA(#548894); +#548894 = FILL_AREA_STYLE('',(#548895)); +#548895 = FILL_AREA_STYLE_COLOUR('',#546242); +#548896 = OVER_RIDING_STYLED_ITEM('overriding color',(#548897),#118193, + #546228); +#548897 = PRESENTATION_STYLE_ASSIGNMENT((#548898)); +#548898 = SURFACE_STYLE_USAGE(.BOTH.,#548899); +#548899 = SURFACE_SIDE_STYLE('',(#548900)); +#548900 = SURFACE_STYLE_FILL_AREA(#548901); +#548901 = FILL_AREA_STYLE('',(#548902)); +#548902 = FILL_AREA_STYLE_COLOUR('',#546242); +#548903 = OVER_RIDING_STYLED_ITEM('overriding color',(#548904),#118491, + #546228); +#548904 = PRESENTATION_STYLE_ASSIGNMENT((#548905)); +#548905 = SURFACE_STYLE_USAGE(.BOTH.,#548906); +#548906 = SURFACE_SIDE_STYLE('',(#548907)); +#548907 = SURFACE_STYLE_FILL_AREA(#548908); +#548908 = FILL_AREA_STYLE('',(#548909)); +#548909 = FILL_AREA_STYLE_COLOUR('',#546242); +#548910 = OVER_RIDING_STYLED_ITEM('overriding color',(#548911),#118503, + #546228); +#548911 = PRESENTATION_STYLE_ASSIGNMENT((#548912)); +#548912 = SURFACE_STYLE_USAGE(.BOTH.,#548913); +#548913 = SURFACE_SIDE_STYLE('',(#548914)); +#548914 = SURFACE_STYLE_FILL_AREA(#548915); +#548915 = FILL_AREA_STYLE('',(#548916)); +#548916 = FILL_AREA_STYLE_COLOUR('',#546242); +#548917 = OVER_RIDING_STYLED_ITEM('overriding color',(#548918),#118520, + #546228); +#548918 = PRESENTATION_STYLE_ASSIGNMENT((#548919)); +#548919 = SURFACE_STYLE_USAGE(.BOTH.,#548920); +#548920 = SURFACE_SIDE_STYLE('',(#548921)); +#548921 = SURFACE_STYLE_FILL_AREA(#548922); +#548922 = FILL_AREA_STYLE('',(#548923)); +#548923 = FILL_AREA_STYLE_COLOUR('',#546242); +#548924 = OVER_RIDING_STYLED_ITEM('overriding color',(#548925),#118537, + #546228); +#548925 = PRESENTATION_STYLE_ASSIGNMENT((#548926)); +#548926 = SURFACE_STYLE_USAGE(.BOTH.,#548927); +#548927 = SURFACE_SIDE_STYLE('',(#548928)); +#548928 = SURFACE_STYLE_FILL_AREA(#548929); +#548929 = FILL_AREA_STYLE('',(#548930)); +#548930 = FILL_AREA_STYLE_COLOUR('',#546242); +#548931 = OVER_RIDING_STYLED_ITEM('overriding color',(#548932),#118554, + #546228); +#548932 = PRESENTATION_STYLE_ASSIGNMENT((#548933)); +#548933 = SURFACE_STYLE_USAGE(.BOTH.,#548934); +#548934 = SURFACE_SIDE_STYLE('',(#548935)); +#548935 = SURFACE_STYLE_FILL_AREA(#548936); +#548936 = FILL_AREA_STYLE('',(#548937)); +#548937 = FILL_AREA_STYLE_COLOUR('',#546242); +#548938 = OVER_RIDING_STYLED_ITEM('overriding color',(#548939),#118576, + #546228); +#548939 = PRESENTATION_STYLE_ASSIGNMENT((#548940)); +#548940 = SURFACE_STYLE_USAGE(.BOTH.,#548941); +#548941 = SURFACE_SIDE_STYLE('',(#548942)); +#548942 = SURFACE_STYLE_FILL_AREA(#548943); +#548943 = FILL_AREA_STYLE('',(#548944)); +#548944 = FILL_AREA_STYLE_COLOUR('',#546242); +#548945 = OVER_RIDING_STYLED_ITEM('overriding color',(#548946),#118593, + #546228); +#548946 = PRESENTATION_STYLE_ASSIGNMENT((#548947)); +#548947 = SURFACE_STYLE_USAGE(.BOTH.,#548948); +#548948 = SURFACE_SIDE_STYLE('',(#548949)); +#548949 = SURFACE_STYLE_FILL_AREA(#548950); +#548950 = FILL_AREA_STYLE('',(#548951)); +#548951 = FILL_AREA_STYLE_COLOUR('',#546242); +#548952 = OVER_RIDING_STYLED_ITEM('overriding color',(#548953),#118615, + #546228); +#548953 = PRESENTATION_STYLE_ASSIGNMENT((#548954)); +#548954 = SURFACE_STYLE_USAGE(.BOTH.,#548955); +#548955 = SURFACE_SIDE_STYLE('',(#548956)); +#548956 = SURFACE_STYLE_FILL_AREA(#548957); +#548957 = FILL_AREA_STYLE('',(#548958)); +#548958 = FILL_AREA_STYLE_COLOUR('',#546242); +#548959 = OVER_RIDING_STYLED_ITEM('overriding color',(#548960),#118637, + #546228); +#548960 = PRESENTATION_STYLE_ASSIGNMENT((#548961)); +#548961 = SURFACE_STYLE_USAGE(.BOTH.,#548962); +#548962 = SURFACE_SIDE_STYLE('',(#548963)); +#548963 = SURFACE_STYLE_FILL_AREA(#548964); +#548964 = FILL_AREA_STYLE('',(#548965)); +#548965 = FILL_AREA_STYLE_COLOUR('',#546242); +#548966 = OVER_RIDING_STYLED_ITEM('overriding color',(#548967),#118654, + #546228); +#548967 = PRESENTATION_STYLE_ASSIGNMENT((#548968)); +#548968 = SURFACE_STYLE_USAGE(.BOTH.,#548969); +#548969 = SURFACE_SIDE_STYLE('',(#548970)); +#548970 = SURFACE_STYLE_FILL_AREA(#548971); +#548971 = FILL_AREA_STYLE('',(#548972)); +#548972 = FILL_AREA_STYLE_COLOUR('',#546242); +#548973 = OVER_RIDING_STYLED_ITEM('overriding color',(#548974),#118671, + #546228); +#548974 = PRESENTATION_STYLE_ASSIGNMENT((#548975)); +#548975 = SURFACE_STYLE_USAGE(.BOTH.,#548976); +#548976 = SURFACE_SIDE_STYLE('',(#548977)); +#548977 = SURFACE_STYLE_FILL_AREA(#548978); +#548978 = FILL_AREA_STYLE('',(#548979)); +#548979 = FILL_AREA_STYLE_COLOUR('',#546242); +#548980 = OVER_RIDING_STYLED_ITEM('overriding color',(#548981),#118688, + #546228); +#548981 = PRESENTATION_STYLE_ASSIGNMENT((#548982)); +#548982 = SURFACE_STYLE_USAGE(.BOTH.,#548983); +#548983 = SURFACE_SIDE_STYLE('',(#548984)); +#548984 = SURFACE_STYLE_FILL_AREA(#548985); +#548985 = FILL_AREA_STYLE('',(#548986)); +#548986 = FILL_AREA_STYLE_COLOUR('',#546242); +#548987 = OVER_RIDING_STYLED_ITEM('overriding color',(#548988),#118705, + #546228); +#548988 = PRESENTATION_STYLE_ASSIGNMENT((#548989)); +#548989 = SURFACE_STYLE_USAGE(.BOTH.,#548990); +#548990 = SURFACE_SIDE_STYLE('',(#548991)); +#548991 = SURFACE_STYLE_FILL_AREA(#548992); +#548992 = FILL_AREA_STYLE('',(#548993)); +#548993 = FILL_AREA_STYLE_COLOUR('',#546242); +#548994 = OVER_RIDING_STYLED_ITEM('overriding color',(#548995),#118722, + #546228); +#548995 = PRESENTATION_STYLE_ASSIGNMENT((#548996)); +#548996 = SURFACE_STYLE_USAGE(.BOTH.,#548997); +#548997 = SURFACE_SIDE_STYLE('',(#548998)); +#548998 = SURFACE_STYLE_FILL_AREA(#548999); +#548999 = FILL_AREA_STYLE('',(#549000)); +#549000 = FILL_AREA_STYLE_COLOUR('',#546242); +#549001 = OVER_RIDING_STYLED_ITEM('overriding color',(#549002),#118739, + #546228); +#549002 = PRESENTATION_STYLE_ASSIGNMENT((#549003)); +#549003 = SURFACE_STYLE_USAGE(.BOTH.,#549004); +#549004 = SURFACE_SIDE_STYLE('',(#549005)); +#549005 = SURFACE_STYLE_FILL_AREA(#549006); +#549006 = FILL_AREA_STYLE('',(#549007)); +#549007 = FILL_AREA_STYLE_COLOUR('',#546242); +#549008 = OVER_RIDING_STYLED_ITEM('overriding color',(#549009),#118751, + #546228); +#549009 = PRESENTATION_STYLE_ASSIGNMENT((#549010)); +#549010 = SURFACE_STYLE_USAGE(.BOTH.,#549011); +#549011 = SURFACE_SIDE_STYLE('',(#549012)); +#549012 = SURFACE_STYLE_FILL_AREA(#549013); +#549013 = FILL_AREA_STYLE('',(#549014)); +#549014 = FILL_AREA_STYLE_COLOUR('',#546242); +#549015 = OVER_RIDING_STYLED_ITEM('overriding color',(#549016),#118768, + #546228); +#549016 = PRESENTATION_STYLE_ASSIGNMENT((#549017)); +#549017 = SURFACE_STYLE_USAGE(.BOTH.,#549018); +#549018 = SURFACE_SIDE_STYLE('',(#549019)); +#549019 = SURFACE_STYLE_FILL_AREA(#549020); +#549020 = FILL_AREA_STYLE('',(#549021)); +#549021 = FILL_AREA_STYLE_COLOUR('',#546242); +#549022 = OVER_RIDING_STYLED_ITEM('overriding color',(#549023),#118785, + #546228); +#549023 = PRESENTATION_STYLE_ASSIGNMENT((#549024)); +#549024 = SURFACE_STYLE_USAGE(.BOTH.,#549025); +#549025 = SURFACE_SIDE_STYLE('',(#549026)); +#549026 = SURFACE_STYLE_FILL_AREA(#549027); +#549027 = FILL_AREA_STYLE('',(#549028)); +#549028 = FILL_AREA_STYLE_COLOUR('',#546242); +#549029 = OVER_RIDING_STYLED_ITEM('overriding color',(#549030),#118802, + #546228); +#549030 = PRESENTATION_STYLE_ASSIGNMENT((#549031)); +#549031 = SURFACE_STYLE_USAGE(.BOTH.,#549032); +#549032 = SURFACE_SIDE_STYLE('',(#549033)); +#549033 = SURFACE_STYLE_FILL_AREA(#549034); +#549034 = FILL_AREA_STYLE('',(#549035)); +#549035 = FILL_AREA_STYLE_COLOUR('',#546242); +#549036 = OVER_RIDING_STYLED_ITEM('overriding color',(#549037),#118819, + #546228); +#549037 = PRESENTATION_STYLE_ASSIGNMENT((#549038)); +#549038 = SURFACE_STYLE_USAGE(.BOTH.,#549039); +#549039 = SURFACE_SIDE_STYLE('',(#549040)); +#549040 = SURFACE_STYLE_FILL_AREA(#549041); +#549041 = FILL_AREA_STYLE('',(#549042)); +#549042 = FILL_AREA_STYLE_COLOUR('',#546242); +#549043 = OVER_RIDING_STYLED_ITEM('overriding color',(#549044),#118836, + #546228); +#549044 = PRESENTATION_STYLE_ASSIGNMENT((#549045)); +#549045 = SURFACE_STYLE_USAGE(.BOTH.,#549046); +#549046 = SURFACE_SIDE_STYLE('',(#549047)); +#549047 = SURFACE_STYLE_FILL_AREA(#549048); +#549048 = FILL_AREA_STYLE('',(#549049)); +#549049 = FILL_AREA_STYLE_COLOUR('',#546242); +#549050 = OVER_RIDING_STYLED_ITEM('overriding color',(#549051),#118848, + #546228); +#549051 = PRESENTATION_STYLE_ASSIGNMENT((#549052)); +#549052 = SURFACE_STYLE_USAGE(.BOTH.,#549053); +#549053 = SURFACE_SIDE_STYLE('',(#549054)); +#549054 = SURFACE_STYLE_FILL_AREA(#549055); +#549055 = FILL_AREA_STYLE('',(#549056)); +#549056 = FILL_AREA_STYLE_COLOUR('',#546242); +#549057 = OVER_RIDING_STYLED_ITEM('overriding color',(#549058),#118865, + #546228); +#549058 = PRESENTATION_STYLE_ASSIGNMENT((#549059)); +#549059 = SURFACE_STYLE_USAGE(.BOTH.,#549060); +#549060 = SURFACE_SIDE_STYLE('',(#549061)); +#549061 = SURFACE_STYLE_FILL_AREA(#549062); +#549062 = FILL_AREA_STYLE('',(#549063)); +#549063 = FILL_AREA_STYLE_COLOUR('',#546242); +#549064 = OVER_RIDING_STYLED_ITEM('overriding color',(#549065),#118882, + #546228); +#549065 = PRESENTATION_STYLE_ASSIGNMENT((#549066)); +#549066 = SURFACE_STYLE_USAGE(.BOTH.,#549067); +#549067 = SURFACE_SIDE_STYLE('',(#549068)); +#549068 = SURFACE_STYLE_FILL_AREA(#549069); +#549069 = FILL_AREA_STYLE('',(#549070)); +#549070 = FILL_AREA_STYLE_COLOUR('',#546242); +#549071 = OVER_RIDING_STYLED_ITEM('overriding color',(#549072),#118899, + #546228); +#549072 = PRESENTATION_STYLE_ASSIGNMENT((#549073)); +#549073 = SURFACE_STYLE_USAGE(.BOTH.,#549074); +#549074 = SURFACE_SIDE_STYLE('',(#549075)); +#549075 = SURFACE_STYLE_FILL_AREA(#549076); +#549076 = FILL_AREA_STYLE('',(#549077)); +#549077 = FILL_AREA_STYLE_COLOUR('',#546242); +#549078 = OVER_RIDING_STYLED_ITEM('overriding color',(#549079),#118916, + #546228); +#549079 = PRESENTATION_STYLE_ASSIGNMENT((#549080)); +#549080 = SURFACE_STYLE_USAGE(.BOTH.,#549081); +#549081 = SURFACE_SIDE_STYLE('',(#549082)); +#549082 = SURFACE_STYLE_FILL_AREA(#549083); +#549083 = FILL_AREA_STYLE('',(#549084)); +#549084 = FILL_AREA_STYLE_COLOUR('',#546242); +#549085 = OVER_RIDING_STYLED_ITEM('overriding color',(#549086),#118933, + #546228); +#549086 = PRESENTATION_STYLE_ASSIGNMENT((#549087)); +#549087 = SURFACE_STYLE_USAGE(.BOTH.,#549088); +#549088 = SURFACE_SIDE_STYLE('',(#549089)); +#549089 = SURFACE_STYLE_FILL_AREA(#549090); +#549090 = FILL_AREA_STYLE('',(#549091)); +#549091 = FILL_AREA_STYLE_COLOUR('',#546242); +#549092 = OVER_RIDING_STYLED_ITEM('overriding color',(#549093),#118950, + #546228); +#549093 = PRESENTATION_STYLE_ASSIGNMENT((#549094)); +#549094 = SURFACE_STYLE_USAGE(.BOTH.,#549095); +#549095 = SURFACE_SIDE_STYLE('',(#549096)); +#549096 = SURFACE_STYLE_FILL_AREA(#549097); +#549097 = FILL_AREA_STYLE('',(#549098)); +#549098 = FILL_AREA_STYLE_COLOUR('',#546242); +#549099 = OVER_RIDING_STYLED_ITEM('overriding color',(#549100),#118962, + #546228); +#549100 = PRESENTATION_STYLE_ASSIGNMENT((#549101)); +#549101 = SURFACE_STYLE_USAGE(.BOTH.,#549102); +#549102 = SURFACE_SIDE_STYLE('',(#549103)); +#549103 = SURFACE_STYLE_FILL_AREA(#549104); +#549104 = FILL_AREA_STYLE('',(#549105)); +#549105 = FILL_AREA_STYLE_COLOUR('',#546242); +#549106 = OVER_RIDING_STYLED_ITEM('overriding color',(#549107),#118979, + #546228); +#549107 = PRESENTATION_STYLE_ASSIGNMENT((#549108)); +#549108 = SURFACE_STYLE_USAGE(.BOTH.,#549109); +#549109 = SURFACE_SIDE_STYLE('',(#549110)); +#549110 = SURFACE_STYLE_FILL_AREA(#549111); +#549111 = FILL_AREA_STYLE('',(#549112)); +#549112 = FILL_AREA_STYLE_COLOUR('',#546242); +#549113 = OVER_RIDING_STYLED_ITEM('overriding color',(#549114),#118996, + #546228); +#549114 = PRESENTATION_STYLE_ASSIGNMENT((#549115)); +#549115 = SURFACE_STYLE_USAGE(.BOTH.,#549116); +#549116 = SURFACE_SIDE_STYLE('',(#549117)); +#549117 = SURFACE_STYLE_FILL_AREA(#549118); +#549118 = FILL_AREA_STYLE('',(#549119)); +#549119 = FILL_AREA_STYLE_COLOUR('',#546242); +#549120 = OVER_RIDING_STYLED_ITEM('overriding color',(#549121),#119008, + #546228); +#549121 = PRESENTATION_STYLE_ASSIGNMENT((#549122)); +#549122 = SURFACE_STYLE_USAGE(.BOTH.,#549123); +#549123 = SURFACE_SIDE_STYLE('',(#549124)); +#549124 = SURFACE_STYLE_FILL_AREA(#549125); +#549125 = FILL_AREA_STYLE('',(#549126)); +#549126 = FILL_AREA_STYLE_COLOUR('',#546242); +#549127 = OVER_RIDING_STYLED_ITEM('overriding color',(#549128),#119032, + #546228); +#549128 = PRESENTATION_STYLE_ASSIGNMENT((#549129)); +#549129 = SURFACE_STYLE_USAGE(.BOTH.,#549130); +#549130 = SURFACE_SIDE_STYLE('',(#549131)); +#549131 = SURFACE_STYLE_FILL_AREA(#549132); +#549132 = FILL_AREA_STYLE('',(#549133)); +#549133 = FILL_AREA_STYLE_COLOUR('',#546242); +#549134 = OVER_RIDING_STYLED_ITEM('overriding color',(#549135),#119049, + #546228); +#549135 = PRESENTATION_STYLE_ASSIGNMENT((#549136)); +#549136 = SURFACE_STYLE_USAGE(.BOTH.,#549137); +#549137 = SURFACE_SIDE_STYLE('',(#549138)); +#549138 = SURFACE_STYLE_FILL_AREA(#549139); +#549139 = FILL_AREA_STYLE('',(#549140)); +#549140 = FILL_AREA_STYLE_COLOUR('',#546242); +#549141 = OVER_RIDING_STYLED_ITEM('overriding color',(#549142),#119066, + #546228); +#549142 = PRESENTATION_STYLE_ASSIGNMENT((#549143)); +#549143 = SURFACE_STYLE_USAGE(.BOTH.,#549144); +#549144 = SURFACE_SIDE_STYLE('',(#549145)); +#549145 = SURFACE_STYLE_FILL_AREA(#549146); +#549146 = FILL_AREA_STYLE('',(#549147)); +#549147 = FILL_AREA_STYLE_COLOUR('',#546242); +#549148 = OVER_RIDING_STYLED_ITEM('overriding color',(#549149),#119083, + #546228); +#549149 = PRESENTATION_STYLE_ASSIGNMENT((#549150)); +#549150 = SURFACE_STYLE_USAGE(.BOTH.,#549151); +#549151 = SURFACE_SIDE_STYLE('',(#549152)); +#549152 = SURFACE_STYLE_FILL_AREA(#549153); +#549153 = FILL_AREA_STYLE('',(#549154)); +#549154 = FILL_AREA_STYLE_COLOUR('',#546242); +#549155 = OVER_RIDING_STYLED_ITEM('overriding color',(#549156),#119102, + #546228); +#549156 = PRESENTATION_STYLE_ASSIGNMENT((#549157)); +#549157 = SURFACE_STYLE_USAGE(.BOTH.,#549158); +#549158 = SURFACE_SIDE_STYLE('',(#549159)); +#549159 = SURFACE_STYLE_FILL_AREA(#549160); +#549160 = FILL_AREA_STYLE('',(#549161)); +#549161 = FILL_AREA_STYLE_COLOUR('',#546242); +#549162 = OVER_RIDING_STYLED_ITEM('overriding color',(#549163),#119115, + #546228); +#549163 = PRESENTATION_STYLE_ASSIGNMENT((#549164)); +#549164 = SURFACE_STYLE_USAGE(.BOTH.,#549165); +#549165 = SURFACE_SIDE_STYLE('',(#549166)); +#549166 = SURFACE_STYLE_FILL_AREA(#549167); +#549167 = FILL_AREA_STYLE('',(#549168)); +#549168 = FILL_AREA_STYLE_COLOUR('',#546242); +#549169 = OVER_RIDING_STYLED_ITEM('overriding color',(#549170),#119128, + #546228); +#549170 = PRESENTATION_STYLE_ASSIGNMENT((#549171)); +#549171 = SURFACE_STYLE_USAGE(.BOTH.,#549172); +#549172 = SURFACE_SIDE_STYLE('',(#549173)); +#549173 = SURFACE_STYLE_FILL_AREA(#549174); +#549174 = FILL_AREA_STYLE('',(#549175)); +#549175 = FILL_AREA_STYLE_COLOUR('',#546242); +#549176 = OVER_RIDING_STYLED_ITEM('overriding color',(#549177),#119158, + #546228); +#549177 = PRESENTATION_STYLE_ASSIGNMENT((#549178)); +#549178 = SURFACE_STYLE_USAGE(.BOTH.,#549179); +#549179 = SURFACE_SIDE_STYLE('',(#549180)); +#549180 = SURFACE_STYLE_FILL_AREA(#549181); +#549181 = FILL_AREA_STYLE('',(#549182)); +#549182 = FILL_AREA_STYLE_COLOUR('',#546242); +#549183 = OVER_RIDING_STYLED_ITEM('overriding color',(#549184),#119215, + #546228); +#549184 = PRESENTATION_STYLE_ASSIGNMENT((#549185)); +#549185 = SURFACE_STYLE_USAGE(.BOTH.,#549186); +#549186 = SURFACE_SIDE_STYLE('',(#549187)); +#549187 = SURFACE_STYLE_FILL_AREA(#549188); +#549188 = FILL_AREA_STYLE('',(#549189)); +#549189 = FILL_AREA_STYLE_COLOUR('',#546242); +#549190 = OVER_RIDING_STYLED_ITEM('overriding color',(#549191),#119268, + #546228); +#549191 = PRESENTATION_STYLE_ASSIGNMENT((#549192)); +#549192 = SURFACE_STYLE_USAGE(.BOTH.,#549193); +#549193 = SURFACE_SIDE_STYLE('',(#549194)); +#549194 = SURFACE_STYLE_FILL_AREA(#549195); +#549195 = FILL_AREA_STYLE('',(#549196)); +#549196 = FILL_AREA_STYLE_COLOUR('',#546242); +#549197 = OVER_RIDING_STYLED_ITEM('overriding color',(#549198),#119303, + #546228); +#549198 = PRESENTATION_STYLE_ASSIGNMENT((#549199)); +#549199 = SURFACE_STYLE_USAGE(.BOTH.,#549200); +#549200 = SURFACE_SIDE_STYLE('',(#549201)); +#549201 = SURFACE_STYLE_FILL_AREA(#549202); +#549202 = FILL_AREA_STYLE('',(#549203)); +#549203 = FILL_AREA_STYLE_COLOUR('',#546242); +#549204 = OVER_RIDING_STYLED_ITEM('overriding color',(#549205),#119334, + #546228); +#549205 = PRESENTATION_STYLE_ASSIGNMENT((#549206)); +#549206 = SURFACE_STYLE_USAGE(.BOTH.,#549207); +#549207 = SURFACE_SIDE_STYLE('',(#549208)); +#549208 = SURFACE_STYLE_FILL_AREA(#549209); +#549209 = FILL_AREA_STYLE('',(#549210)); +#549210 = FILL_AREA_STYLE_COLOUR('',#546242); +#549211 = OVER_RIDING_STYLED_ITEM('overriding color',(#549212),#119351, + #546228); +#549212 = PRESENTATION_STYLE_ASSIGNMENT((#549213)); +#549213 = SURFACE_STYLE_USAGE(.BOTH.,#549214); +#549214 = SURFACE_SIDE_STYLE('',(#549215)); +#549215 = SURFACE_STYLE_FILL_AREA(#549216); +#549216 = FILL_AREA_STYLE('',(#549217)); +#549217 = FILL_AREA_STYLE_COLOUR('',#546242); +#549218 = OVER_RIDING_STYLED_ITEM('overriding color',(#549219),#119368, + #546228); +#549219 = PRESENTATION_STYLE_ASSIGNMENT((#549220)); +#549220 = SURFACE_STYLE_USAGE(.BOTH.,#549221); +#549221 = SURFACE_SIDE_STYLE('',(#549222)); +#549222 = SURFACE_STYLE_FILL_AREA(#549223); +#549223 = FILL_AREA_STYLE('',(#549224)); +#549224 = FILL_AREA_STYLE_COLOUR('',#546242); +#549225 = OVER_RIDING_STYLED_ITEM('overriding color',(#549226),#119385, + #546228); +#549226 = PRESENTATION_STYLE_ASSIGNMENT((#549227)); +#549227 = SURFACE_STYLE_USAGE(.BOTH.,#549228); +#549228 = SURFACE_SIDE_STYLE('',(#549229)); +#549229 = SURFACE_STYLE_FILL_AREA(#549230); +#549230 = FILL_AREA_STYLE('',(#549231)); +#549231 = FILL_AREA_STYLE_COLOUR('',#546242); +#549232 = OVER_RIDING_STYLED_ITEM('overriding color',(#549233),#119411, + #546228); +#549233 = PRESENTATION_STYLE_ASSIGNMENT((#549234)); +#549234 = SURFACE_STYLE_USAGE(.BOTH.,#549235); +#549235 = SURFACE_SIDE_STYLE('',(#549236)); +#549236 = SURFACE_STYLE_FILL_AREA(#549237); +#549237 = FILL_AREA_STYLE('',(#549238)); +#549238 = FILL_AREA_STYLE_COLOUR('',#546242); +#549239 = OVER_RIDING_STYLED_ITEM('overriding color',(#549240),#119445, + #546228); +#549240 = PRESENTATION_STYLE_ASSIGNMENT((#549241)); +#549241 = SURFACE_STYLE_USAGE(.BOTH.,#549242); +#549242 = SURFACE_SIDE_STYLE('',(#549243)); +#549243 = SURFACE_STYLE_FILL_AREA(#549244); +#549244 = FILL_AREA_STYLE('',(#549245)); +#549245 = FILL_AREA_STYLE_COLOUR('',#546242); +#549246 = OVER_RIDING_STYLED_ITEM('overriding color',(#549247),#119476, + #546228); +#549247 = PRESENTATION_STYLE_ASSIGNMENT((#549248)); +#549248 = SURFACE_STYLE_USAGE(.BOTH.,#549249); +#549249 = SURFACE_SIDE_STYLE('',(#549250)); +#549250 = SURFACE_STYLE_FILL_AREA(#549251); +#549251 = FILL_AREA_STYLE('',(#549252)); +#549252 = FILL_AREA_STYLE_COLOUR('',#546242); +#549253 = OVER_RIDING_STYLED_ITEM('overriding color',(#549254),#119516, + #546228); +#549254 = PRESENTATION_STYLE_ASSIGNMENT((#549255)); +#549255 = SURFACE_STYLE_USAGE(.BOTH.,#549256); +#549256 = SURFACE_SIDE_STYLE('',(#549257)); +#549257 = SURFACE_STYLE_FILL_AREA(#549258); +#549258 = FILL_AREA_STYLE('',(#549259)); +#549259 = FILL_AREA_STYLE_COLOUR('',#546242); +#549260 = OVER_RIDING_STYLED_ITEM('overriding color',(#549261),#119541, + #546228); +#549261 = PRESENTATION_STYLE_ASSIGNMENT((#549262)); +#549262 = SURFACE_STYLE_USAGE(.BOTH.,#549263); +#549263 = SURFACE_SIDE_STYLE('',(#549264)); +#549264 = SURFACE_STYLE_FILL_AREA(#549265); +#549265 = FILL_AREA_STYLE('',(#549266)); +#549266 = FILL_AREA_STYLE_COLOUR('',#546242); +#549267 = OVER_RIDING_STYLED_ITEM('overriding color',(#549268),#119770, + #546228); +#549268 = PRESENTATION_STYLE_ASSIGNMENT((#549269)); +#549269 = SURFACE_STYLE_USAGE(.BOTH.,#549270); +#549270 = SURFACE_SIDE_STYLE('',(#549271)); +#549271 = SURFACE_STYLE_FILL_AREA(#549272); +#549272 = FILL_AREA_STYLE('',(#549273)); +#549273 = FILL_AREA_STYLE_COLOUR('',#546242); +#549274 = OVER_RIDING_STYLED_ITEM('overriding color',(#549275),#119801, + #546228); +#549275 = PRESENTATION_STYLE_ASSIGNMENT((#549276)); +#549276 = SURFACE_STYLE_USAGE(.BOTH.,#549277); +#549277 = SURFACE_SIDE_STYLE('',(#549278)); +#549278 = SURFACE_STYLE_FILL_AREA(#549279); +#549279 = FILL_AREA_STYLE('',(#549280)); +#549280 = FILL_AREA_STYLE_COLOUR('',#546242); +#549281 = OVER_RIDING_STYLED_ITEM('overriding color',(#549282),#119825, + #546228); +#549282 = PRESENTATION_STYLE_ASSIGNMENT((#549283)); +#549283 = SURFACE_STYLE_USAGE(.BOTH.,#549284); +#549284 = SURFACE_SIDE_STYLE('',(#549285)); +#549285 = SURFACE_STYLE_FILL_AREA(#549286); +#549286 = FILL_AREA_STYLE('',(#549287)); +#549287 = FILL_AREA_STYLE_COLOUR('',#546242); +#549288 = OVER_RIDING_STYLED_ITEM('overriding color',(#549289),#119849, + #546228); +#549289 = PRESENTATION_STYLE_ASSIGNMENT((#549290)); +#549290 = SURFACE_STYLE_USAGE(.BOTH.,#549291); +#549291 = SURFACE_SIDE_STYLE('',(#549292)); +#549292 = SURFACE_STYLE_FILL_AREA(#549293); +#549293 = FILL_AREA_STYLE('',(#549294)); +#549294 = FILL_AREA_STYLE_COLOUR('',#546242); +#549295 = OVER_RIDING_STYLED_ITEM('overriding color',(#549296),#119873, + #546228); +#549296 = PRESENTATION_STYLE_ASSIGNMENT((#549297)); +#549297 = SURFACE_STYLE_USAGE(.BOTH.,#549298); +#549298 = SURFACE_SIDE_STYLE('',(#549299)); +#549299 = SURFACE_STYLE_FILL_AREA(#549300); +#549300 = FILL_AREA_STYLE('',(#549301)); +#549301 = FILL_AREA_STYLE_COLOUR('',#546242); +#549302 = OVER_RIDING_STYLED_ITEM('overriding color',(#549303),#119897, + #546228); +#549303 = PRESENTATION_STYLE_ASSIGNMENT((#549304)); +#549304 = SURFACE_STYLE_USAGE(.BOTH.,#549305); +#549305 = SURFACE_SIDE_STYLE('',(#549306)); +#549306 = SURFACE_STYLE_FILL_AREA(#549307); +#549307 = FILL_AREA_STYLE('',(#549308)); +#549308 = FILL_AREA_STYLE_COLOUR('',#546242); +#549309 = OVER_RIDING_STYLED_ITEM('overriding color',(#549310),#120141, + #546228); +#549310 = PRESENTATION_STYLE_ASSIGNMENT((#549311)); +#549311 = SURFACE_STYLE_USAGE(.BOTH.,#549312); +#549312 = SURFACE_SIDE_STYLE('',(#549313)); +#549313 = SURFACE_STYLE_FILL_AREA(#549314); +#549314 = FILL_AREA_STYLE('',(#549315)); +#549315 = FILL_AREA_STYLE_COLOUR('',#546242); +#549316 = OVER_RIDING_STYLED_ITEM('overriding color',(#549317),#120158, + #546228); +#549317 = PRESENTATION_STYLE_ASSIGNMENT((#549318)); +#549318 = SURFACE_STYLE_USAGE(.BOTH.,#549319); +#549319 = SURFACE_SIDE_STYLE('',(#549320)); +#549320 = SURFACE_STYLE_FILL_AREA(#549321); +#549321 = FILL_AREA_STYLE('',(#549322)); +#549322 = FILL_AREA_STYLE_COLOUR('',#546242); +#549323 = OVER_RIDING_STYLED_ITEM('overriding color',(#549324),#120200, + #546228); +#549324 = PRESENTATION_STYLE_ASSIGNMENT((#549325)); +#549325 = SURFACE_STYLE_USAGE(.BOTH.,#549326); +#549326 = SURFACE_SIDE_STYLE('',(#549327)); +#549327 = SURFACE_STYLE_FILL_AREA(#549328); +#549328 = FILL_AREA_STYLE('',(#549329)); +#549329 = FILL_AREA_STYLE_COLOUR('',#546242); +#549330 = OVER_RIDING_STYLED_ITEM('overriding color',(#549331),#120233, + #546228); +#549331 = PRESENTATION_STYLE_ASSIGNMENT((#549332)); +#549332 = SURFACE_STYLE_USAGE(.BOTH.,#549333); +#549333 = SURFACE_SIDE_STYLE('',(#549334)); +#549334 = SURFACE_STYLE_FILL_AREA(#549335); +#549335 = FILL_AREA_STYLE('',(#549336)); +#549336 = FILL_AREA_STYLE_COLOUR('',#546242); +#549337 = OVER_RIDING_STYLED_ITEM('overriding color',(#549338),#120274, + #546228); +#549338 = PRESENTATION_STYLE_ASSIGNMENT((#549339)); +#549339 = SURFACE_STYLE_USAGE(.BOTH.,#549340); +#549340 = SURFACE_SIDE_STYLE('',(#549341)); +#549341 = SURFACE_STYLE_FILL_AREA(#549342); +#549342 = FILL_AREA_STYLE('',(#549343)); +#549343 = FILL_AREA_STYLE_COLOUR('',#546242); +#549344 = OVER_RIDING_STYLED_ITEM('overriding color',(#549345),#120332, + #546228); +#549345 = PRESENTATION_STYLE_ASSIGNMENT((#549346)); +#549346 = SURFACE_STYLE_USAGE(.BOTH.,#549347); +#549347 = SURFACE_SIDE_STYLE('',(#549348)); +#549348 = SURFACE_STYLE_FILL_AREA(#549349); +#549349 = FILL_AREA_STYLE('',(#549350)); +#549350 = FILL_AREA_STYLE_COLOUR('',#546242); +#549351 = OVER_RIDING_STYLED_ITEM('overriding color',(#549352),#120361, + #546228); +#549352 = PRESENTATION_STYLE_ASSIGNMENT((#549353)); +#549353 = SURFACE_STYLE_USAGE(.BOTH.,#549354); +#549354 = SURFACE_SIDE_STYLE('',(#549355)); +#549355 = SURFACE_STYLE_FILL_AREA(#549356); +#549356 = FILL_AREA_STYLE('',(#549357)); +#549357 = FILL_AREA_STYLE_COLOUR('',#546242); +#549358 = OVER_RIDING_STYLED_ITEM('overriding color',(#549359),#120383, + #546228); +#549359 = PRESENTATION_STYLE_ASSIGNMENT((#549360)); +#549360 = SURFACE_STYLE_USAGE(.BOTH.,#549361); +#549361 = SURFACE_SIDE_STYLE('',(#549362)); +#549362 = SURFACE_STYLE_FILL_AREA(#549363); +#549363 = FILL_AREA_STYLE('',(#549364)); +#549364 = FILL_AREA_STYLE_COLOUR('',#546242); +#549365 = OVER_RIDING_STYLED_ITEM('overriding color',(#549366),#120400, + #546228); +#549366 = PRESENTATION_STYLE_ASSIGNMENT((#549367)); +#549367 = SURFACE_STYLE_USAGE(.BOTH.,#549368); +#549368 = SURFACE_SIDE_STYLE('',(#549369)); +#549369 = SURFACE_STYLE_FILL_AREA(#549370); +#549370 = FILL_AREA_STYLE('',(#549371)); +#549371 = FILL_AREA_STYLE_COLOUR('',#546242); +#549372 = OVER_RIDING_STYLED_ITEM('overriding color',(#549373),#120422, + #546228); +#549373 = PRESENTATION_STYLE_ASSIGNMENT((#549374)); +#549374 = SURFACE_STYLE_USAGE(.BOTH.,#549375); +#549375 = SURFACE_SIDE_STYLE('',(#549376)); +#549376 = SURFACE_STYLE_FILL_AREA(#549377); +#549377 = FILL_AREA_STYLE('',(#549378)); +#549378 = FILL_AREA_STYLE_COLOUR('',#546242); +#549379 = OVER_RIDING_STYLED_ITEM('overriding color',(#549380),#120439, + #546228); +#549380 = PRESENTATION_STYLE_ASSIGNMENT((#549381)); +#549381 = SURFACE_STYLE_USAGE(.BOTH.,#549382); +#549382 = SURFACE_SIDE_STYLE('',(#549383)); +#549383 = SURFACE_STYLE_FILL_AREA(#549384); +#549384 = FILL_AREA_STYLE('',(#549385)); +#549385 = FILL_AREA_STYLE_COLOUR('',#546242); +#549386 = OVER_RIDING_STYLED_ITEM('overriding color',(#549387),#120456, + #546228); +#549387 = PRESENTATION_STYLE_ASSIGNMENT((#549388)); +#549388 = SURFACE_STYLE_USAGE(.BOTH.,#549389); +#549389 = SURFACE_SIDE_STYLE('',(#549390)); +#549390 = SURFACE_STYLE_FILL_AREA(#549391); +#549391 = FILL_AREA_STYLE('',(#549392)); +#549392 = FILL_AREA_STYLE_COLOUR('',#546242); +#549393 = OVER_RIDING_STYLED_ITEM('overriding color',(#549394),#120473, + #546228); +#549394 = PRESENTATION_STYLE_ASSIGNMENT((#549395)); +#549395 = SURFACE_STYLE_USAGE(.BOTH.,#549396); +#549396 = SURFACE_SIDE_STYLE('',(#549397)); +#549397 = SURFACE_STYLE_FILL_AREA(#549398); +#549398 = FILL_AREA_STYLE('',(#549399)); +#549399 = FILL_AREA_STYLE_COLOUR('',#546242); +#549400 = OVER_RIDING_STYLED_ITEM('overriding color',(#549401),#120490, + #546228); +#549401 = PRESENTATION_STYLE_ASSIGNMENT((#549402)); +#549402 = SURFACE_STYLE_USAGE(.BOTH.,#549403); +#549403 = SURFACE_SIDE_STYLE('',(#549404)); +#549404 = SURFACE_STYLE_FILL_AREA(#549405); +#549405 = FILL_AREA_STYLE('',(#549406)); +#549406 = FILL_AREA_STYLE_COLOUR('',#546242); +#549407 = OVER_RIDING_STYLED_ITEM('overriding color',(#549408),#120507, + #546228); +#549408 = PRESENTATION_STYLE_ASSIGNMENT((#549409)); +#549409 = SURFACE_STYLE_USAGE(.BOTH.,#549410); +#549410 = SURFACE_SIDE_STYLE('',(#549411)); +#549411 = SURFACE_STYLE_FILL_AREA(#549412); +#549412 = FILL_AREA_STYLE('',(#549413)); +#549413 = FILL_AREA_STYLE_COLOUR('',#546242); +#549414 = OVER_RIDING_STYLED_ITEM('overriding color',(#549415),#120519, + #546228); +#549415 = PRESENTATION_STYLE_ASSIGNMENT((#549416)); +#549416 = SURFACE_STYLE_USAGE(.BOTH.,#549417); +#549417 = SURFACE_SIDE_STYLE('',(#549418)); +#549418 = SURFACE_STYLE_FILL_AREA(#549419); +#549419 = FILL_AREA_STYLE('',(#549420)); +#549420 = FILL_AREA_STYLE_COLOUR('',#546242); +#549421 = OVER_RIDING_STYLED_ITEM('overriding color',(#549422),#120546, + #546228); +#549422 = PRESENTATION_STYLE_ASSIGNMENT((#549423)); +#549423 = SURFACE_STYLE_USAGE(.BOTH.,#549424); +#549424 = SURFACE_SIDE_STYLE('',(#549425)); +#549425 = SURFACE_STYLE_FILL_AREA(#549426); +#549426 = FILL_AREA_STYLE('',(#549427)); +#549427 = FILL_AREA_STYLE_COLOUR('',#546242); +#549428 = OVER_RIDING_STYLED_ITEM('overriding color',(#549429),#120571, + #546228); +#549429 = PRESENTATION_STYLE_ASSIGNMENT((#549430)); +#549430 = SURFACE_STYLE_USAGE(.BOTH.,#549431); +#549431 = SURFACE_SIDE_STYLE('',(#549432)); +#549432 = SURFACE_STYLE_FILL_AREA(#549433); +#549433 = FILL_AREA_STYLE('',(#549434)); +#549434 = FILL_AREA_STYLE_COLOUR('',#546242); +#549435 = OVER_RIDING_STYLED_ITEM('overriding color',(#549436),#120597, + #546228); +#549436 = PRESENTATION_STYLE_ASSIGNMENT((#549437)); +#549437 = SURFACE_STYLE_USAGE(.BOTH.,#549438); +#549438 = SURFACE_SIDE_STYLE('',(#549439)); +#549439 = SURFACE_STYLE_FILL_AREA(#549440); +#549440 = FILL_AREA_STYLE('',(#549441)); +#549441 = FILL_AREA_STYLE_COLOUR('',#546242); +#549442 = OVER_RIDING_STYLED_ITEM('overriding color',(#549443),#120622, + #546228); +#549443 = PRESENTATION_STYLE_ASSIGNMENT((#549444)); +#549444 = SURFACE_STYLE_USAGE(.BOTH.,#549445); +#549445 = SURFACE_SIDE_STYLE('',(#549446)); +#549446 = SURFACE_STYLE_FILL_AREA(#549447); +#549447 = FILL_AREA_STYLE('',(#549448)); +#549448 = FILL_AREA_STYLE_COLOUR('',#546242); +#549449 = OVER_RIDING_STYLED_ITEM('overriding color',(#549450),#120646, + #546228); +#549450 = PRESENTATION_STYLE_ASSIGNMENT((#549451)); +#549451 = SURFACE_STYLE_USAGE(.BOTH.,#549452); +#549452 = SURFACE_SIDE_STYLE('',(#549453)); +#549453 = SURFACE_STYLE_FILL_AREA(#549454); +#549454 = FILL_AREA_STYLE('',(#549455)); +#549455 = FILL_AREA_STYLE_COLOUR('',#546242); +#549456 = OVER_RIDING_STYLED_ITEM('overriding color',(#549457),#120671, + #546228); +#549457 = PRESENTATION_STYLE_ASSIGNMENT((#549458)); +#549458 = SURFACE_STYLE_USAGE(.BOTH.,#549459); +#549459 = SURFACE_SIDE_STYLE('',(#549460)); +#549460 = SURFACE_STYLE_FILL_AREA(#549461); +#549461 = FILL_AREA_STYLE('',(#549462)); +#549462 = FILL_AREA_STYLE_COLOUR('',#546242); +#549463 = OVER_RIDING_STYLED_ITEM('overriding color',(#549464),#120696, + #546228); +#549464 = PRESENTATION_STYLE_ASSIGNMENT((#549465)); +#549465 = SURFACE_STYLE_USAGE(.BOTH.,#549466); +#549466 = SURFACE_SIDE_STYLE('',(#549467)); +#549467 = SURFACE_STYLE_FILL_AREA(#549468); +#549468 = FILL_AREA_STYLE('',(#549469)); +#549469 = FILL_AREA_STYLE_COLOUR('',#546242); +#549470 = OVER_RIDING_STYLED_ITEM('overriding color',(#549471),#120708, + #546228); +#549471 = PRESENTATION_STYLE_ASSIGNMENT((#549472)); +#549472 = SURFACE_STYLE_USAGE(.BOTH.,#549473); +#549473 = SURFACE_SIDE_STYLE('',(#549474)); +#549474 = SURFACE_STYLE_FILL_AREA(#549475); +#549475 = FILL_AREA_STYLE('',(#549476)); +#549476 = FILL_AREA_STYLE_COLOUR('',#546242); +#549477 = OVER_RIDING_STYLED_ITEM('overriding color',(#549478),#120742, + #546228); +#549478 = PRESENTATION_STYLE_ASSIGNMENT((#549479)); +#549479 = SURFACE_STYLE_USAGE(.BOTH.,#549480); +#549480 = SURFACE_SIDE_STYLE('',(#549481)); +#549481 = SURFACE_STYLE_FILL_AREA(#549482); +#549482 = FILL_AREA_STYLE('',(#549483)); +#549483 = FILL_AREA_STYLE_COLOUR('',#546242); +#549484 = OVER_RIDING_STYLED_ITEM('overriding color',(#549485),#120756, + #546228); +#549485 = PRESENTATION_STYLE_ASSIGNMENT((#549486)); +#549486 = SURFACE_STYLE_USAGE(.BOTH.,#549487); +#549487 = SURFACE_SIDE_STYLE('',(#549488)); +#549488 = SURFACE_STYLE_FILL_AREA(#549489); +#549489 = FILL_AREA_STYLE('',(#549490)); +#549490 = FILL_AREA_STYLE_COLOUR('',#546242); +#549491 = OVER_RIDING_STYLED_ITEM('overriding color',(#549492),#120773, + #546228); +#549492 = PRESENTATION_STYLE_ASSIGNMENT((#549493)); +#549493 = SURFACE_STYLE_USAGE(.BOTH.,#549494); +#549494 = SURFACE_SIDE_STYLE('',(#549495)); +#549495 = SURFACE_STYLE_FILL_AREA(#549496); +#549496 = FILL_AREA_STYLE('',(#549497)); +#549497 = FILL_AREA_STYLE_COLOUR('',#546242); +#549498 = OVER_RIDING_STYLED_ITEM('overriding color',(#549499),#120790, + #546228); +#549499 = PRESENTATION_STYLE_ASSIGNMENT((#549500)); +#549500 = SURFACE_STYLE_USAGE(.BOTH.,#549501); +#549501 = SURFACE_SIDE_STYLE('',(#549502)); +#549502 = SURFACE_STYLE_FILL_AREA(#549503); +#549503 = FILL_AREA_STYLE('',(#549504)); +#549504 = FILL_AREA_STYLE_COLOUR('',#546242); +#549505 = OVER_RIDING_STYLED_ITEM('overriding color',(#549506),#120804, + #546228); +#549506 = PRESENTATION_STYLE_ASSIGNMENT((#549507)); +#549507 = SURFACE_STYLE_USAGE(.BOTH.,#549508); +#549508 = SURFACE_SIDE_STYLE('',(#549509)); +#549509 = SURFACE_STYLE_FILL_AREA(#549510); +#549510 = FILL_AREA_STYLE('',(#549511)); +#549511 = FILL_AREA_STYLE_COLOUR('',#546242); +#549512 = OVER_RIDING_STYLED_ITEM('overriding color',(#549513),#120821, + #546228); +#549513 = PRESENTATION_STYLE_ASSIGNMENT((#549514)); +#549514 = SURFACE_STYLE_USAGE(.BOTH.,#549515); +#549515 = SURFACE_SIDE_STYLE('',(#549516)); +#549516 = SURFACE_STYLE_FILL_AREA(#549517); +#549517 = FILL_AREA_STYLE('',(#549518)); +#549518 = FILL_AREA_STYLE_COLOUR('',#546242); +#549519 = OVER_RIDING_STYLED_ITEM('overriding color',(#549520),#120838, + #546228); +#549520 = PRESENTATION_STYLE_ASSIGNMENT((#549521)); +#549521 = SURFACE_STYLE_USAGE(.BOTH.,#549522); +#549522 = SURFACE_SIDE_STYLE('',(#549523)); +#549523 = SURFACE_STYLE_FILL_AREA(#549524); +#549524 = FILL_AREA_STYLE('',(#549525)); +#549525 = FILL_AREA_STYLE_COLOUR('',#546242); +#549526 = OVER_RIDING_STYLED_ITEM('overriding color',(#549527),#120855, + #546228); +#549527 = PRESENTATION_STYLE_ASSIGNMENT((#549528)); +#549528 = SURFACE_STYLE_USAGE(.BOTH.,#549529); +#549529 = SURFACE_SIDE_STYLE('',(#549530)); +#549530 = SURFACE_STYLE_FILL_AREA(#549531); +#549531 = FILL_AREA_STYLE('',(#549532)); +#549532 = FILL_AREA_STYLE_COLOUR('',#546242); +#549533 = OVER_RIDING_STYLED_ITEM('overriding color',(#549534),#120872, + #546228); +#549534 = PRESENTATION_STYLE_ASSIGNMENT((#549535)); +#549535 = SURFACE_STYLE_USAGE(.BOTH.,#549536); +#549536 = SURFACE_SIDE_STYLE('',(#549537)); +#549537 = SURFACE_STYLE_FILL_AREA(#549538); +#549538 = FILL_AREA_STYLE('',(#549539)); +#549539 = FILL_AREA_STYLE_COLOUR('',#546242); +#549540 = OVER_RIDING_STYLED_ITEM('overriding color',(#549541),#120889, + #546228); +#549541 = PRESENTATION_STYLE_ASSIGNMENT((#549542)); +#549542 = SURFACE_STYLE_USAGE(.BOTH.,#549543); +#549543 = SURFACE_SIDE_STYLE('',(#549544)); +#549544 = SURFACE_STYLE_FILL_AREA(#549545); +#549545 = FILL_AREA_STYLE('',(#549546)); +#549546 = FILL_AREA_STYLE_COLOUR('',#546242); +#549547 = OVER_RIDING_STYLED_ITEM('overriding color',(#549548),#120901, + #546228); +#549548 = PRESENTATION_STYLE_ASSIGNMENT((#549549)); +#549549 = SURFACE_STYLE_USAGE(.BOTH.,#549550); +#549550 = SURFACE_SIDE_STYLE('',(#549551)); +#549551 = SURFACE_STYLE_FILL_AREA(#549552); +#549552 = FILL_AREA_STYLE('',(#549553)); +#549553 = FILL_AREA_STYLE_COLOUR('',#546242); +#549554 = OVER_RIDING_STYLED_ITEM('overriding color',(#549555),#120925, + #546228); +#549555 = PRESENTATION_STYLE_ASSIGNMENT((#549556)); +#549556 = SURFACE_STYLE_USAGE(.BOTH.,#549557); +#549557 = SURFACE_SIDE_STYLE('',(#549558)); +#549558 = SURFACE_STYLE_FILL_AREA(#549559); +#549559 = FILL_AREA_STYLE('',(#549560)); +#549560 = FILL_AREA_STYLE_COLOUR('',#546242); +#549561 = OVER_RIDING_STYLED_ITEM('overriding color',(#549562),#120942, + #546228); +#549562 = PRESENTATION_STYLE_ASSIGNMENT((#549563)); +#549563 = SURFACE_STYLE_USAGE(.BOTH.,#549564); +#549564 = SURFACE_SIDE_STYLE('',(#549565)); +#549565 = SURFACE_STYLE_FILL_AREA(#549566); +#549566 = FILL_AREA_STYLE('',(#549567)); +#549567 = FILL_AREA_STYLE_COLOUR('',#546242); +#549568 = OVER_RIDING_STYLED_ITEM('overriding color',(#549569),#120959, + #546228); +#549569 = PRESENTATION_STYLE_ASSIGNMENT((#549570)); +#549570 = SURFACE_STYLE_USAGE(.BOTH.,#549571); +#549571 = SURFACE_SIDE_STYLE('',(#549572)); +#549572 = SURFACE_STYLE_FILL_AREA(#549573); +#549573 = FILL_AREA_STYLE('',(#549574)); +#549574 = FILL_AREA_STYLE_COLOUR('',#546242); +#549575 = OVER_RIDING_STYLED_ITEM('overriding color',(#549576),#120976, + #546228); +#549576 = PRESENTATION_STYLE_ASSIGNMENT((#549577)); +#549577 = SURFACE_STYLE_USAGE(.BOTH.,#549578); +#549578 = SURFACE_SIDE_STYLE('',(#549579)); +#549579 = SURFACE_STYLE_FILL_AREA(#549580); +#549580 = FILL_AREA_STYLE('',(#549581)); +#549581 = FILL_AREA_STYLE_COLOUR('',#546242); +#549582 = OVER_RIDING_STYLED_ITEM('overriding color',(#549583),#120995, + #546228); +#549583 = PRESENTATION_STYLE_ASSIGNMENT((#549584)); +#549584 = SURFACE_STYLE_USAGE(.BOTH.,#549585); +#549585 = SURFACE_SIDE_STYLE('',(#549586)); +#549586 = SURFACE_STYLE_FILL_AREA(#549587); +#549587 = FILL_AREA_STYLE('',(#549588)); +#549588 = FILL_AREA_STYLE_COLOUR('',#546242); +#549589 = OVER_RIDING_STYLED_ITEM('overriding color',(#549590),#121008, + #546228); +#549590 = PRESENTATION_STYLE_ASSIGNMENT((#549591)); +#549591 = SURFACE_STYLE_USAGE(.BOTH.,#549592); +#549592 = SURFACE_SIDE_STYLE('',(#549593)); +#549593 = SURFACE_STYLE_FILL_AREA(#549594); +#549594 = FILL_AREA_STYLE('',(#549595)); +#549595 = FILL_AREA_STYLE_COLOUR('',#546242); +#549596 = OVER_RIDING_STYLED_ITEM('overriding color',(#549597),#121021, + #546228); +#549597 = PRESENTATION_STYLE_ASSIGNMENT((#549598)); +#549598 = SURFACE_STYLE_USAGE(.BOTH.,#549599); +#549599 = SURFACE_SIDE_STYLE('',(#549600)); +#549600 = SURFACE_STYLE_FILL_AREA(#549601); +#549601 = FILL_AREA_STYLE('',(#549602)); +#549602 = FILL_AREA_STYLE_COLOUR('',#546242); +#549603 = STYLED_ITEM('color',(#549604),#121033); +#549604 = PRESENTATION_STYLE_ASSIGNMENT((#549605)); +#549605 = SURFACE_STYLE_USAGE(.BOTH.,#549606); +#549606 = SURFACE_SIDE_STYLE('',(#549607)); +#549607 = SURFACE_STYLE_FILL_AREA(#549608); +#549608 = FILL_AREA_STYLE('',(#549609)); +#549609 = FILL_AREA_STYLE_COLOUR('',#521053); +#549610 = OVER_RIDING_STYLED_ITEM('overriding color',(#549611),#121035, + #549603); +#549611 = PRESENTATION_STYLE_ASSIGNMENT((#549612)); +#549612 = SURFACE_STYLE_USAGE(.BOTH.,#549613); +#549613 = SURFACE_SIDE_STYLE('',(#549614)); +#549614 = SURFACE_STYLE_FILL_AREA(#549615); +#549615 = FILL_AREA_STYLE('',(#549616)); +#549616 = FILL_AREA_STYLE_COLOUR('',#510377); +#549617 = OVER_RIDING_STYLED_ITEM('overriding color',(#549618),#121163, + #549603); +#549618 = PRESENTATION_STYLE_ASSIGNMENT((#549619)); +#549619 = SURFACE_STYLE_USAGE(.BOTH.,#549620); +#549620 = SURFACE_SIDE_STYLE('',(#549621)); +#549621 = SURFACE_STYLE_FILL_AREA(#549622); +#549622 = FILL_AREA_STYLE('',(#549623)); +#549623 = FILL_AREA_STYLE_COLOUR('',#510377); +#549624 = OVER_RIDING_STYLED_ITEM('overriding color',(#549625),#121194, + #549603); +#549625 = PRESENTATION_STYLE_ASSIGNMENT((#549626)); +#549626 = SURFACE_STYLE_USAGE(.BOTH.,#549627); +#549627 = SURFACE_SIDE_STYLE('',(#549628)); +#549628 = SURFACE_STYLE_FILL_AREA(#549629); +#549629 = FILL_AREA_STYLE('',(#549630)); +#549630 = FILL_AREA_STYLE_COLOUR('',#510377); +#549631 = OVER_RIDING_STYLED_ITEM('overriding color',(#549632),#121289, + #549603); +#549632 = PRESENTATION_STYLE_ASSIGNMENT((#549633)); +#549633 = SURFACE_STYLE_USAGE(.BOTH.,#549634); +#549634 = SURFACE_SIDE_STYLE('',(#549635)); +#549635 = SURFACE_STYLE_FILL_AREA(#549636); +#549636 = FILL_AREA_STYLE('',(#549637)); +#549637 = FILL_AREA_STYLE_COLOUR('',#510377); +#549638 = OVER_RIDING_STYLED_ITEM('overriding color',(#549639),#121320, + #549603); +#549639 = PRESENTATION_STYLE_ASSIGNMENT((#549640)); +#549640 = SURFACE_STYLE_USAGE(.BOTH.,#549641); +#549641 = SURFACE_SIDE_STYLE('',(#549642)); +#549642 = SURFACE_STYLE_FILL_AREA(#549643); +#549643 = FILL_AREA_STYLE('',(#549644)); +#549644 = FILL_AREA_STYLE_COLOUR('',#510377); +#549645 = OVER_RIDING_STYLED_ITEM('overriding color',(#549646),#121453, + #549603); +#549646 = PRESENTATION_STYLE_ASSIGNMENT((#549647)); +#549647 = SURFACE_STYLE_USAGE(.BOTH.,#549648); +#549648 = SURFACE_SIDE_STYLE('',(#549649)); +#549649 = SURFACE_STYLE_FILL_AREA(#549650); +#549650 = FILL_AREA_STYLE('',(#549651)); +#549651 = FILL_AREA_STYLE_COLOUR('',#546242); +#549652 = OVER_RIDING_STYLED_ITEM('overriding color',(#549653),#121485, + #549603); +#549653 = PRESENTATION_STYLE_ASSIGNMENT((#549654)); +#549654 = SURFACE_STYLE_USAGE(.BOTH.,#549655); +#549655 = SURFACE_SIDE_STYLE('',(#549656)); +#549656 = SURFACE_STYLE_FILL_AREA(#549657); +#549657 = FILL_AREA_STYLE('',(#549658)); +#549658 = FILL_AREA_STYLE_COLOUR('',#546242); +#549659 = OVER_RIDING_STYLED_ITEM('overriding color',(#549660),#121517, + #549603); +#549660 = PRESENTATION_STYLE_ASSIGNMENT((#549661)); +#549661 = SURFACE_STYLE_USAGE(.BOTH.,#549662); +#549662 = SURFACE_SIDE_STYLE('',(#549663)); +#549663 = SURFACE_STYLE_FILL_AREA(#549664); +#549664 = FILL_AREA_STYLE('',(#549665)); +#549665 = FILL_AREA_STYLE_COLOUR('',#546242); +#549666 = OVER_RIDING_STYLED_ITEM('overriding color',(#549667),#121534, + #549603); +#549667 = PRESENTATION_STYLE_ASSIGNMENT((#549668)); +#549668 = SURFACE_STYLE_USAGE(.BOTH.,#549669); +#549669 = SURFACE_SIDE_STYLE('',(#549670)); +#549670 = SURFACE_STYLE_FILL_AREA(#549671); +#549671 = FILL_AREA_STYLE('',(#549672)); +#549672 = FILL_AREA_STYLE_COLOUR('',#546242); +#549673 = OVER_RIDING_STYLED_ITEM('overriding color',(#549674),#121551, + #549603); +#549674 = PRESENTATION_STYLE_ASSIGNMENT((#549675)); +#549675 = SURFACE_STYLE_USAGE(.BOTH.,#549676); +#549676 = SURFACE_SIDE_STYLE('',(#549677)); +#549677 = SURFACE_STYLE_FILL_AREA(#549678); +#549678 = FILL_AREA_STYLE('',(#549679)); +#549679 = FILL_AREA_STYLE_COLOUR('',#546242); +#549680 = OVER_RIDING_STYLED_ITEM('overriding color',(#549681),#121563, + #549603); +#549681 = PRESENTATION_STYLE_ASSIGNMENT((#549682)); +#549682 = SURFACE_STYLE_USAGE(.BOTH.,#549683); +#549683 = SURFACE_SIDE_STYLE('',(#549684)); +#549684 = SURFACE_STYLE_FILL_AREA(#549685); +#549685 = FILL_AREA_STYLE('',(#549686)); +#549686 = FILL_AREA_STYLE_COLOUR('',#546242); +#549687 = OVER_RIDING_STYLED_ITEM('overriding color',(#549688),#121595, + #549603); +#549688 = PRESENTATION_STYLE_ASSIGNMENT((#549689)); +#549689 = SURFACE_STYLE_USAGE(.BOTH.,#549690); +#549690 = SURFACE_SIDE_STYLE('',(#549691)); +#549691 = SURFACE_STYLE_FILL_AREA(#549692); +#549692 = FILL_AREA_STYLE('',(#549693)); +#549693 = FILL_AREA_STYLE_COLOUR('',#546242); +#549694 = OVER_RIDING_STYLED_ITEM('overriding color',(#549695),#121627, + #549603); +#549695 = PRESENTATION_STYLE_ASSIGNMENT((#549696)); +#549696 = SURFACE_STYLE_USAGE(.BOTH.,#549697); +#549697 = SURFACE_SIDE_STYLE('',(#549698)); +#549698 = SURFACE_STYLE_FILL_AREA(#549699); +#549699 = FILL_AREA_STYLE('',(#549700)); +#549700 = FILL_AREA_STYLE_COLOUR('',#546242); +#549701 = OVER_RIDING_STYLED_ITEM('overriding color',(#549702),#121644, + #549603); +#549702 = PRESENTATION_STYLE_ASSIGNMENT((#549703)); +#549703 = SURFACE_STYLE_USAGE(.BOTH.,#549704); +#549704 = SURFACE_SIDE_STYLE('',(#549705)); +#549705 = SURFACE_STYLE_FILL_AREA(#549706); +#549706 = FILL_AREA_STYLE('',(#549707)); +#549707 = FILL_AREA_STYLE_COLOUR('',#546242); +#549708 = OVER_RIDING_STYLED_ITEM('overriding color',(#549709),#121661, + #549603); +#549709 = PRESENTATION_STYLE_ASSIGNMENT((#549710)); +#549710 = SURFACE_STYLE_USAGE(.BOTH.,#549711); +#549711 = SURFACE_SIDE_STYLE('',(#549712)); +#549712 = SURFACE_STYLE_FILL_AREA(#549713); +#549713 = FILL_AREA_STYLE('',(#549714)); +#549714 = FILL_AREA_STYLE_COLOUR('',#546242); +#549715 = OVER_RIDING_STYLED_ITEM('overriding color',(#549716),#121673, + #549603); +#549716 = PRESENTATION_STYLE_ASSIGNMENT((#549717)); +#549717 = SURFACE_STYLE_USAGE(.BOTH.,#549718); +#549718 = SURFACE_SIDE_STYLE('',(#549719)); +#549719 = SURFACE_STYLE_FILL_AREA(#549720); +#549720 = FILL_AREA_STYLE('',(#549721)); +#549721 = FILL_AREA_STYLE_COLOUR('',#546242); +#549722 = OVER_RIDING_STYLED_ITEM('overriding color',(#549723),#121704, + #549603); +#549723 = PRESENTATION_STYLE_ASSIGNMENT((#549724)); +#549724 = SURFACE_STYLE_USAGE(.BOTH.,#549725); +#549725 = SURFACE_SIDE_STYLE('',(#549726)); +#549726 = SURFACE_STYLE_FILL_AREA(#549727); +#549727 = FILL_AREA_STYLE('',(#549728)); +#549728 = FILL_AREA_STYLE_COLOUR('',#546242); +#549729 = OVER_RIDING_STYLED_ITEM('overriding color',(#549730),#121737, + #549603); +#549730 = PRESENTATION_STYLE_ASSIGNMENT((#549731)); +#549731 = SURFACE_STYLE_USAGE(.BOTH.,#549732); +#549732 = SURFACE_SIDE_STYLE('',(#549733)); +#549733 = SURFACE_STYLE_FILL_AREA(#549734); +#549734 = FILL_AREA_STYLE('',(#549735)); +#549735 = FILL_AREA_STYLE_COLOUR('',#546242); +#549736 = OVER_RIDING_STYLED_ITEM('overriding color',(#549737),#121754, + #549603); +#549737 = PRESENTATION_STYLE_ASSIGNMENT((#549738)); +#549738 = SURFACE_STYLE_USAGE(.BOTH.,#549739); +#549739 = SURFACE_SIDE_STYLE('',(#549740)); +#549740 = SURFACE_STYLE_FILL_AREA(#549741); +#549741 = FILL_AREA_STYLE('',(#549742)); +#549742 = FILL_AREA_STYLE_COLOUR('',#546242); +#549743 = OVER_RIDING_STYLED_ITEM('overriding color',(#549744),#121771, + #549603); +#549744 = PRESENTATION_STYLE_ASSIGNMENT((#549745)); +#549745 = SURFACE_STYLE_USAGE(.BOTH.,#549746); +#549746 = SURFACE_SIDE_STYLE('',(#549747)); +#549747 = SURFACE_STYLE_FILL_AREA(#549748); +#549748 = FILL_AREA_STYLE('',(#549749)); +#549749 = FILL_AREA_STYLE_COLOUR('',#546242); +#549750 = OVER_RIDING_STYLED_ITEM('overriding color',(#549751),#121783, + #549603); +#549751 = PRESENTATION_STYLE_ASSIGNMENT((#549752)); +#549752 = SURFACE_STYLE_USAGE(.BOTH.,#549753); +#549753 = SURFACE_SIDE_STYLE('',(#549754)); +#549754 = SURFACE_STYLE_FILL_AREA(#549755); +#549755 = FILL_AREA_STYLE('',(#549756)); +#549756 = FILL_AREA_STYLE_COLOUR('',#510377); +#549757 = OVER_RIDING_STYLED_ITEM('overriding color',(#549758),#121815, + #549603); +#549758 = PRESENTATION_STYLE_ASSIGNMENT((#549759)); +#549759 = SURFACE_STYLE_USAGE(.BOTH.,#549760); +#549760 = SURFACE_SIDE_STYLE('',(#549761)); +#549761 = SURFACE_STYLE_FILL_AREA(#549762); +#549762 = FILL_AREA_STYLE('',(#549763)); +#549763 = FILL_AREA_STYLE_COLOUR('',#510377); +#549764 = OVER_RIDING_STYLED_ITEM('overriding color',(#549765),#121847, + #549603); +#549765 = PRESENTATION_STYLE_ASSIGNMENT((#549766)); +#549766 = SURFACE_STYLE_USAGE(.BOTH.,#549767); +#549767 = SURFACE_SIDE_STYLE('',(#549768)); +#549768 = SURFACE_STYLE_FILL_AREA(#549769); +#549769 = FILL_AREA_STYLE('',(#549770)); +#549770 = FILL_AREA_STYLE_COLOUR('',#510377); +#549771 = OVER_RIDING_STYLED_ITEM('overriding color',(#549772),#121865, + #549603); +#549772 = PRESENTATION_STYLE_ASSIGNMENT((#549773)); +#549773 = SURFACE_STYLE_USAGE(.BOTH.,#549774); +#549774 = SURFACE_SIDE_STYLE('',(#549775)); +#549775 = SURFACE_STYLE_FILL_AREA(#549776); +#549776 = FILL_AREA_STYLE('',(#549777)); +#549777 = FILL_AREA_STYLE_COLOUR('',#510377); +#549778 = OVER_RIDING_STYLED_ITEM('overriding color',(#549779),#121875, + #549603); +#549779 = PRESENTATION_STYLE_ASSIGNMENT((#549780)); +#549780 = SURFACE_STYLE_USAGE(.BOTH.,#549781); +#549781 = SURFACE_SIDE_STYLE('',(#549782)); +#549782 = SURFACE_STYLE_FILL_AREA(#549783); +#549783 = FILL_AREA_STYLE('',(#549784)); +#549784 = FILL_AREA_STYLE_COLOUR('',#510377); +#549785 = OVER_RIDING_STYLED_ITEM('overriding color',(#549786),#121899, + #549603); +#549786 = PRESENTATION_STYLE_ASSIGNMENT((#549787)); +#549787 = SURFACE_STYLE_USAGE(.BOTH.,#549788); +#549788 = SURFACE_SIDE_STYLE('',(#549789)); +#549789 = SURFACE_STYLE_FILL_AREA(#549790); +#549790 = FILL_AREA_STYLE('',(#549791)); +#549791 = FILL_AREA_STYLE_COLOUR('',#510377); +#549792 = OVER_RIDING_STYLED_ITEM('overriding color',(#549793),#121923, + #549603); +#549793 = PRESENTATION_STYLE_ASSIGNMENT((#549794)); +#549794 = SURFACE_STYLE_USAGE(.BOTH.,#549795); +#549795 = SURFACE_SIDE_STYLE('',(#549796)); +#549796 = SURFACE_STYLE_FILL_AREA(#549797); +#549797 = FILL_AREA_STYLE('',(#549798)); +#549798 = FILL_AREA_STYLE_COLOUR('',#549799); +#549799 = COLOUR_RGB('',1.,0.690196085623,0.356862747468); +#549800 = OVER_RIDING_STYLED_ITEM('overriding color',(#549801),#122075, + #549603); +#549801 = PRESENTATION_STYLE_ASSIGNMENT((#549802)); +#549802 = SURFACE_STYLE_USAGE(.BOTH.,#549803); +#549803 = SURFACE_SIDE_STYLE('',(#549804)); +#549804 = SURFACE_STYLE_FILL_AREA(#549805); +#549805 = FILL_AREA_STYLE('',(#549806)); +#549806 = FILL_AREA_STYLE_COLOUR('',#510377); +#549807 = OVER_RIDING_STYLED_ITEM('overriding color',(#549808),#122106, + #549603); +#549808 = PRESENTATION_STYLE_ASSIGNMENT((#549809)); +#549809 = SURFACE_STYLE_USAGE(.BOTH.,#549810); +#549810 = SURFACE_SIDE_STYLE('',(#549811)); +#549811 = SURFACE_STYLE_FILL_AREA(#549812); +#549812 = FILL_AREA_STYLE('',(#549813)); +#549813 = FILL_AREA_STYLE_COLOUR('',#510377); +#549814 = OVER_RIDING_STYLED_ITEM('overriding color',(#549815),#122137, + #549603); +#549815 = PRESENTATION_STYLE_ASSIGNMENT((#549816)); +#549816 = SURFACE_STYLE_USAGE(.BOTH.,#549817); +#549817 = SURFACE_SIDE_STYLE('',(#549818)); +#549818 = SURFACE_STYLE_FILL_AREA(#549819); +#549819 = FILL_AREA_STYLE('',(#549820)); +#549820 = FILL_AREA_STYLE_COLOUR('',#510377); +#549821 = OVER_RIDING_STYLED_ITEM('overriding color',(#549822),#122154, + #549603); +#549822 = PRESENTATION_STYLE_ASSIGNMENT((#549823)); +#549823 = SURFACE_STYLE_USAGE(.BOTH.,#549824); +#549824 = SURFACE_SIDE_STYLE('',(#549825)); +#549825 = SURFACE_STYLE_FILL_AREA(#549826); +#549826 = FILL_AREA_STYLE('',(#549827)); +#549827 = FILL_AREA_STYLE_COLOUR('',#510377); +#549828 = OVER_RIDING_STYLED_ITEM('overriding color',(#549829),#122171, + #549603); +#549829 = PRESENTATION_STYLE_ASSIGNMENT((#549830)); +#549830 = SURFACE_STYLE_USAGE(.BOTH.,#549831); +#549831 = SURFACE_SIDE_STYLE('',(#549832)); +#549832 = SURFACE_STYLE_FILL_AREA(#549833); +#549833 = FILL_AREA_STYLE('',(#549834)); +#549834 = FILL_AREA_STYLE_COLOUR('',#510377); +#549835 = OVER_RIDING_STYLED_ITEM('overriding color',(#549836),#122183, + #549603); +#549836 = PRESENTATION_STYLE_ASSIGNMENT((#549837)); +#549837 = SURFACE_STYLE_USAGE(.BOTH.,#549838); +#549838 = SURFACE_SIDE_STYLE('',(#549839)); +#549839 = SURFACE_STYLE_FILL_AREA(#549840); +#549840 = FILL_AREA_STYLE('',(#549841)); +#549841 = FILL_AREA_STYLE_COLOUR('',#510377); +#549842 = OVER_RIDING_STYLED_ITEM('overriding color',(#549843),#122200, + #549603); +#549843 = PRESENTATION_STYLE_ASSIGNMENT((#549844)); +#549844 = SURFACE_STYLE_USAGE(.BOTH.,#549845); +#549845 = SURFACE_SIDE_STYLE('',(#549846)); +#549846 = SURFACE_STYLE_FILL_AREA(#549847); +#549847 = FILL_AREA_STYLE('',(#549848)); +#549848 = FILL_AREA_STYLE_COLOUR('',#510377); +#549849 = OVER_RIDING_STYLED_ITEM('overriding color',(#549850),#122217, + #549603); +#549850 = PRESENTATION_STYLE_ASSIGNMENT((#549851)); +#549851 = SURFACE_STYLE_USAGE(.BOTH.,#549852); +#549852 = SURFACE_SIDE_STYLE('',(#549853)); +#549853 = SURFACE_STYLE_FILL_AREA(#549854); +#549854 = FILL_AREA_STYLE('',(#549855)); +#549855 = FILL_AREA_STYLE_COLOUR('',#510377); +#549856 = OVER_RIDING_STYLED_ITEM('overriding color',(#549857),#122229, + #549603); +#549857 = PRESENTATION_STYLE_ASSIGNMENT((#549858)); +#549858 = SURFACE_STYLE_USAGE(.BOTH.,#549859); +#549859 = SURFACE_SIDE_STYLE('',(#549860)); +#549860 = SURFACE_STYLE_FILL_AREA(#549861); +#549861 = FILL_AREA_STYLE('',(#549862)); +#549862 = FILL_AREA_STYLE_COLOUR('',#510377); +#549863 = OVER_RIDING_STYLED_ITEM('overriding color',(#549864),#122254, + #549603); +#549864 = PRESENTATION_STYLE_ASSIGNMENT((#549865)); +#549865 = SURFACE_STYLE_USAGE(.BOTH.,#549866); +#549866 = SURFACE_SIDE_STYLE('',(#549867)); +#549867 = SURFACE_STYLE_FILL_AREA(#549868); +#549868 = FILL_AREA_STYLE('',(#549869)); +#549869 = FILL_AREA_STYLE_COLOUR('',#510377); +#549870 = OVER_RIDING_STYLED_ITEM('overriding color',(#549871),#122458, + #549603); +#549871 = PRESENTATION_STYLE_ASSIGNMENT((#549872)); +#549872 = SURFACE_STYLE_USAGE(.BOTH.,#549873); +#549873 = SURFACE_SIDE_STYLE('',(#549874)); +#549874 = SURFACE_STYLE_FILL_AREA(#549875); +#549875 = FILL_AREA_STYLE('',(#549876)); +#549876 = FILL_AREA_STYLE_COLOUR('',#510377); +#549877 = OVER_RIDING_STYLED_ITEM('overriding color',(#549878),#122489, + #549603); +#549878 = PRESENTATION_STYLE_ASSIGNMENT((#549879)); +#549879 = SURFACE_STYLE_USAGE(.BOTH.,#549880); +#549880 = SURFACE_SIDE_STYLE('',(#549881)); +#549881 = SURFACE_STYLE_FILL_AREA(#549882); +#549882 = FILL_AREA_STYLE('',(#549883)); +#549883 = FILL_AREA_STYLE_COLOUR('',#510377); +#549884 = OVER_RIDING_STYLED_ITEM('overriding color',(#549885),#122513, + #549603); +#549885 = PRESENTATION_STYLE_ASSIGNMENT((#549886)); +#549886 = SURFACE_STYLE_USAGE(.BOTH.,#549887); +#549887 = SURFACE_SIDE_STYLE('',(#549888)); +#549888 = SURFACE_STYLE_FILL_AREA(#549889); +#549889 = FILL_AREA_STYLE('',(#549890)); +#549890 = FILL_AREA_STYLE_COLOUR('',#510377); +#549891 = OVER_RIDING_STYLED_ITEM('overriding color',(#549892),#122537, + #549603); +#549892 = PRESENTATION_STYLE_ASSIGNMENT((#549893)); +#549893 = SURFACE_STYLE_USAGE(.BOTH.,#549894); +#549894 = SURFACE_SIDE_STYLE('',(#549895)); +#549895 = SURFACE_STYLE_FILL_AREA(#549896); +#549896 = FILL_AREA_STYLE('',(#549897)); +#549897 = FILL_AREA_STYLE_COLOUR('',#510377); +#549898 = OVER_RIDING_STYLED_ITEM('overriding color',(#549899),#122562, + #549603); +#549899 = PRESENTATION_STYLE_ASSIGNMENT((#549900)); +#549900 = SURFACE_STYLE_USAGE(.BOTH.,#549901); +#549901 = SURFACE_SIDE_STYLE('',(#549902)); +#549902 = SURFACE_STYLE_FILL_AREA(#549903); +#549903 = FILL_AREA_STYLE('',(#549904)); +#549904 = FILL_AREA_STYLE_COLOUR('',#510377); +#549905 = OVER_RIDING_STYLED_ITEM('overriding color',(#549906),#122579, + #549603); +#549906 = PRESENTATION_STYLE_ASSIGNMENT((#549907)); +#549907 = SURFACE_STYLE_USAGE(.BOTH.,#549908); +#549908 = SURFACE_SIDE_STYLE('',(#549909)); +#549909 = SURFACE_STYLE_FILL_AREA(#549910); +#549910 = FILL_AREA_STYLE('',(#549911)); +#549911 = FILL_AREA_STYLE_COLOUR('',#549912); +#549912 = COLOUR_RGB('',0.682352935761,0.764705876202,0.560784308451); +#549913 = OVER_RIDING_STYLED_ITEM('overriding color',(#549914),#122746, + #549603); +#549914 = PRESENTATION_STYLE_ASSIGNMENT((#549915)); +#549915 = SURFACE_STYLE_USAGE(.BOTH.,#549916); +#549916 = SURFACE_SIDE_STYLE('',(#549917)); +#549917 = SURFACE_STYLE_FILL_AREA(#549918); +#549918 = FILL_AREA_STYLE('',(#549919)); +#549919 = FILL_AREA_STYLE_COLOUR('',#549912); +#549920 = OVER_RIDING_STYLED_ITEM('overriding color',(#549921),#122786, + #549603); +#549921 = PRESENTATION_STYLE_ASSIGNMENT((#549922)); +#549922 = SURFACE_STYLE_USAGE(.BOTH.,#549923); +#549923 = SURFACE_SIDE_STYLE('',(#549924)); +#549924 = SURFACE_STYLE_FILL_AREA(#549925); +#549925 = FILL_AREA_STYLE('',(#549926)); +#549926 = FILL_AREA_STYLE_COLOUR('',#549912); +#549927 = OVER_RIDING_STYLED_ITEM('overriding color',(#549928),#122826, + #549603); +#549928 = PRESENTATION_STYLE_ASSIGNMENT((#549929)); +#549929 = SURFACE_STYLE_USAGE(.BOTH.,#549930); +#549930 = SURFACE_SIDE_STYLE('',(#549931)); +#549931 = SURFACE_STYLE_FILL_AREA(#549932); +#549932 = FILL_AREA_STYLE('',(#549933)); +#549933 = FILL_AREA_STYLE_COLOUR('',#549912); +#549934 = OVER_RIDING_STYLED_ITEM('overriding color',(#549935),#123407, + #549603); +#549935 = PRESENTATION_STYLE_ASSIGNMENT((#549936)); +#549936 = SURFACE_STYLE_USAGE(.BOTH.,#549937); +#549937 = SURFACE_SIDE_STYLE('',(#549938)); +#549938 = SURFACE_STYLE_FILL_AREA(#549939); +#549939 = FILL_AREA_STYLE('',(#549940)); +#549940 = FILL_AREA_STYLE_COLOUR('',#549912); +#549941 = OVER_RIDING_STYLED_ITEM('overriding color',(#549942),#123575, + #549603); +#549942 = PRESENTATION_STYLE_ASSIGNMENT((#549943)); +#549943 = SURFACE_STYLE_USAGE(.BOTH.,#549944); +#549944 = SURFACE_SIDE_STYLE('',(#549945)); +#549945 = SURFACE_STYLE_FILL_AREA(#549946); +#549946 = FILL_AREA_STYLE('',(#549947)); +#549947 = FILL_AREA_STYLE_COLOUR('',#549912); +#549948 = OVER_RIDING_STYLED_ITEM('overriding color',(#549949),#123727, + #549603); +#549949 = PRESENTATION_STYLE_ASSIGNMENT((#549950)); +#549950 = SURFACE_STYLE_USAGE(.BOTH.,#549951); +#549951 = SURFACE_SIDE_STYLE('',(#549952)); +#549952 = SURFACE_STYLE_FILL_AREA(#549953); +#549953 = FILL_AREA_STYLE('',(#549954)); +#549954 = FILL_AREA_STYLE_COLOUR('',#549912); +#549955 = OVER_RIDING_STYLED_ITEM('overriding color',(#549956),#123815, + #549603); +#549956 = PRESENTATION_STYLE_ASSIGNMENT((#549957)); +#549957 = SURFACE_STYLE_USAGE(.BOTH.,#549958); +#549958 = SURFACE_SIDE_STYLE('',(#549959)); +#549959 = SURFACE_STYLE_FILL_AREA(#549960); +#549960 = FILL_AREA_STYLE('',(#549961)); +#549961 = FILL_AREA_STYLE_COLOUR('',#549912); +#549962 = OVER_RIDING_STYLED_ITEM('overriding color',(#549963),#123903, + #549603); +#549963 = PRESENTATION_STYLE_ASSIGNMENT((#549964)); +#549964 = SURFACE_STYLE_USAGE(.BOTH.,#549965); +#549965 = SURFACE_SIDE_STYLE('',(#549966)); +#549966 = SURFACE_STYLE_FILL_AREA(#549967); +#549967 = FILL_AREA_STYLE('',(#549968)); +#549968 = FILL_AREA_STYLE_COLOUR('',#510377); +#549969 = OVER_RIDING_STYLED_ITEM('overriding color',(#549970),#123925, + #549603); +#549970 = PRESENTATION_STYLE_ASSIGNMENT((#549971)); +#549971 = SURFACE_STYLE_USAGE(.BOTH.,#549972); +#549972 = SURFACE_SIDE_STYLE('',(#549973)); +#549973 = SURFACE_STYLE_FILL_AREA(#549974); +#549974 = FILL_AREA_STYLE('',(#549975)); +#549975 = FILL_AREA_STYLE_COLOUR('',#510377); +#549976 = OVER_RIDING_STYLED_ITEM('overriding color',(#549977),#123937, + #549603); +#549977 = PRESENTATION_STYLE_ASSIGNMENT((#549978)); +#549978 = SURFACE_STYLE_USAGE(.BOTH.,#549979); +#549979 = SURFACE_SIDE_STYLE('',(#549980)); +#549980 = SURFACE_STYLE_FILL_AREA(#549981); +#549981 = FILL_AREA_STYLE('',(#549982)); +#549982 = FILL_AREA_STYLE_COLOUR('',#510377); +#549983 = OVER_RIDING_STYLED_ITEM('overriding color',(#549984),#123954, + #549603); +#549984 = PRESENTATION_STYLE_ASSIGNMENT((#549985)); +#549985 = SURFACE_STYLE_USAGE(.BOTH.,#549986); +#549986 = SURFACE_SIDE_STYLE('',(#549987)); +#549987 = SURFACE_STYLE_FILL_AREA(#549988); +#549988 = FILL_AREA_STYLE('',(#549989)); +#549989 = FILL_AREA_STYLE_COLOUR('',#510377); +#549990 = OVER_RIDING_STYLED_ITEM('overriding color',(#549991),#123966, + #549603); +#549991 = PRESENTATION_STYLE_ASSIGNMENT((#549992)); +#549992 = SURFACE_STYLE_USAGE(.BOTH.,#549993); +#549993 = SURFACE_SIDE_STYLE('',(#549994)); +#549994 = SURFACE_STYLE_FILL_AREA(#549995); +#549995 = FILL_AREA_STYLE('',(#549996)); +#549996 = FILL_AREA_STYLE_COLOUR('',#510377); +#549997 = OVER_RIDING_STYLED_ITEM('overriding color',(#549998),#123983, + #549603); +#549998 = PRESENTATION_STYLE_ASSIGNMENT((#549999)); +#549999 = SURFACE_STYLE_USAGE(.BOTH.,#550000); +#550000 = SURFACE_SIDE_STYLE('',(#550001)); +#550001 = SURFACE_STYLE_FILL_AREA(#550002); +#550002 = FILL_AREA_STYLE('',(#550003)); +#550003 = FILL_AREA_STYLE_COLOUR('',#510377); +#550004 = OVER_RIDING_STYLED_ITEM('overriding color',(#550005),#124000, + #549603); +#550005 = PRESENTATION_STYLE_ASSIGNMENT((#550006)); +#550006 = SURFACE_STYLE_USAGE(.BOTH.,#550007); +#550007 = SURFACE_SIDE_STYLE('',(#550008)); +#550008 = SURFACE_STYLE_FILL_AREA(#550009); +#550009 = FILL_AREA_STYLE('',(#550010)); +#550010 = FILL_AREA_STYLE_COLOUR('',#510377); +#550011 = OVER_RIDING_STYLED_ITEM('overriding color',(#550012),#124017, + #549603); +#550012 = PRESENTATION_STYLE_ASSIGNMENT((#550013)); +#550013 = SURFACE_STYLE_USAGE(.BOTH.,#550014); +#550014 = SURFACE_SIDE_STYLE('',(#550015)); +#550015 = SURFACE_STYLE_FILL_AREA(#550016); +#550016 = FILL_AREA_STYLE('',(#550017)); +#550017 = FILL_AREA_STYLE_COLOUR('',#510377); +#550018 = OVER_RIDING_STYLED_ITEM('overriding color',(#550019),#124029, + #549603); +#550019 = PRESENTATION_STYLE_ASSIGNMENT((#550020)); +#550020 = SURFACE_STYLE_USAGE(.BOTH.,#550021); +#550021 = SURFACE_SIDE_STYLE('',(#550022)); +#550022 = SURFACE_STYLE_FILL_AREA(#550023); +#550023 = FILL_AREA_STYLE('',(#550024)); +#550024 = FILL_AREA_STYLE_COLOUR('',#510377); +#550025 = OVER_RIDING_STYLED_ITEM('overriding color',(#550026),#124051, + #549603); +#550026 = PRESENTATION_STYLE_ASSIGNMENT((#550027)); +#550027 = SURFACE_STYLE_USAGE(.BOTH.,#550028); +#550028 = SURFACE_SIDE_STYLE('',(#550029)); +#550029 = SURFACE_STYLE_FILL_AREA(#550030); +#550030 = FILL_AREA_STYLE('',(#550031)); +#550031 = FILL_AREA_STYLE_COLOUR('',#510377); +#550032 = OVER_RIDING_STYLED_ITEM('overriding color',(#550033),#124068, + #549603); +#550033 = PRESENTATION_STYLE_ASSIGNMENT((#550034)); +#550034 = SURFACE_STYLE_USAGE(.BOTH.,#550035); +#550035 = SURFACE_SIDE_STYLE('',(#550036)); +#550036 = SURFACE_STYLE_FILL_AREA(#550037); +#550037 = FILL_AREA_STYLE('',(#550038)); +#550038 = FILL_AREA_STYLE_COLOUR('',#510377); +#550039 = OVER_RIDING_STYLED_ITEM('overriding color',(#550040),#124085, + #549603); +#550040 = PRESENTATION_STYLE_ASSIGNMENT((#550041)); +#550041 = SURFACE_STYLE_USAGE(.BOTH.,#550042); +#550042 = SURFACE_SIDE_STYLE('',(#550043)); +#550043 = SURFACE_STYLE_FILL_AREA(#550044); +#550044 = FILL_AREA_STYLE('',(#550045)); +#550045 = FILL_AREA_STYLE_COLOUR('',#510377); +#550046 = OVER_RIDING_STYLED_ITEM('overriding color',(#550047),#124102, + #549603); +#550047 = PRESENTATION_STYLE_ASSIGNMENT((#550048)); +#550048 = SURFACE_STYLE_USAGE(.BOTH.,#550049); +#550049 = SURFACE_SIDE_STYLE('',(#550050)); +#550050 = SURFACE_STYLE_FILL_AREA(#550051); +#550051 = FILL_AREA_STYLE('',(#550052)); +#550052 = FILL_AREA_STYLE_COLOUR('',#510377); +#550053 = OVER_RIDING_STYLED_ITEM('overriding color',(#550054),#124114, + #549603); +#550054 = PRESENTATION_STYLE_ASSIGNMENT((#550055)); +#550055 = SURFACE_STYLE_USAGE(.BOTH.,#550056); +#550056 = SURFACE_SIDE_STYLE('',(#550057)); +#550057 = SURFACE_STYLE_FILL_AREA(#550058); +#550058 = FILL_AREA_STYLE('',(#550059)); +#550059 = FILL_AREA_STYLE_COLOUR('',#546242); +#550060 = OVER_RIDING_STYLED_ITEM('overriding color',(#550061),#124145, + #549603); +#550061 = PRESENTATION_STYLE_ASSIGNMENT((#550062)); +#550062 = SURFACE_STYLE_USAGE(.BOTH.,#550063); +#550063 = SURFACE_SIDE_STYLE('',(#550064)); +#550064 = SURFACE_STYLE_FILL_AREA(#550065); +#550065 = FILL_AREA_STYLE('',(#550066)); +#550066 = FILL_AREA_STYLE_COLOUR('',#546242); +#550067 = OVER_RIDING_STYLED_ITEM('overriding color',(#550068),#124169, + #549603); +#550068 = PRESENTATION_STYLE_ASSIGNMENT((#550069)); +#550069 = SURFACE_STYLE_USAGE(.BOTH.,#550070); +#550070 = SURFACE_SIDE_STYLE('',(#550071)); +#550071 = SURFACE_STYLE_FILL_AREA(#550072); +#550072 = FILL_AREA_STYLE('',(#550073)); +#550073 = FILL_AREA_STYLE_COLOUR('',#546242); +#550074 = OVER_RIDING_STYLED_ITEM('overriding color',(#550075),#124193, + #549603); +#550075 = PRESENTATION_STYLE_ASSIGNMENT((#550076)); +#550076 = SURFACE_STYLE_USAGE(.BOTH.,#550077); +#550077 = SURFACE_SIDE_STYLE('',(#550078)); +#550078 = SURFACE_STYLE_FILL_AREA(#550079); +#550079 = FILL_AREA_STYLE('',(#550080)); +#550080 = FILL_AREA_STYLE_COLOUR('',#546242); +#550081 = OVER_RIDING_STYLED_ITEM('overriding color',(#550082),#124217, + #549603); +#550082 = PRESENTATION_STYLE_ASSIGNMENT((#550083)); +#550083 = SURFACE_STYLE_USAGE(.BOTH.,#550084); +#550084 = SURFACE_SIDE_STYLE('',(#550085)); +#550085 = SURFACE_STYLE_FILL_AREA(#550086); +#550086 = FILL_AREA_STYLE('',(#550087)); +#550087 = FILL_AREA_STYLE_COLOUR('',#546242); +#550088 = OVER_RIDING_STYLED_ITEM('overriding color',(#550089),#124241, + #549603); +#550089 = PRESENTATION_STYLE_ASSIGNMENT((#550090)); +#550090 = SURFACE_STYLE_USAGE(.BOTH.,#550091); +#550091 = SURFACE_SIDE_STYLE('',(#550092)); +#550092 = SURFACE_STYLE_FILL_AREA(#550093); +#550093 = FILL_AREA_STYLE('',(#550094)); +#550094 = FILL_AREA_STYLE_COLOUR('',#546242); +#550095 = OVER_RIDING_STYLED_ITEM('overriding color',(#550096),#124265, + #549603); +#550096 = PRESENTATION_STYLE_ASSIGNMENT((#550097)); +#550097 = SURFACE_STYLE_USAGE(.BOTH.,#550098); +#550098 = SURFACE_SIDE_STYLE('',(#550099)); +#550099 = SURFACE_STYLE_FILL_AREA(#550100); +#550100 = FILL_AREA_STYLE('',(#550101)); +#550101 = FILL_AREA_STYLE_COLOUR('',#546242); +#550102 = OVER_RIDING_STYLED_ITEM('overriding color',(#550103),#124289, + #549603); +#550103 = PRESENTATION_STYLE_ASSIGNMENT((#550104)); +#550104 = SURFACE_STYLE_USAGE(.BOTH.,#550105); +#550105 = SURFACE_SIDE_STYLE('',(#550106)); +#550106 = SURFACE_STYLE_FILL_AREA(#550107); +#550107 = FILL_AREA_STYLE('',(#550108)); +#550108 = FILL_AREA_STYLE_COLOUR('',#546242); +#550109 = OVER_RIDING_STYLED_ITEM('overriding color',(#550110),#124313, + #549603); +#550110 = PRESENTATION_STYLE_ASSIGNMENT((#550111)); +#550111 = SURFACE_STYLE_USAGE(.BOTH.,#550112); +#550112 = SURFACE_SIDE_STYLE('',(#550113)); +#550113 = SURFACE_STYLE_FILL_AREA(#550114); +#550114 = FILL_AREA_STYLE('',(#550115)); +#550115 = FILL_AREA_STYLE_COLOUR('',#546242); +#550116 = OVER_RIDING_STYLED_ITEM('overriding color',(#550117),#124337, + #549603); +#550117 = PRESENTATION_STYLE_ASSIGNMENT((#550118)); +#550118 = SURFACE_STYLE_USAGE(.BOTH.,#550119); +#550119 = SURFACE_SIDE_STYLE('',(#550120)); +#550120 = SURFACE_STYLE_FILL_AREA(#550121); +#550121 = FILL_AREA_STYLE('',(#550122)); +#550122 = FILL_AREA_STYLE_COLOUR('',#546242); +#550123 = OVER_RIDING_STYLED_ITEM('overriding color',(#550124),#124361, + #549603); +#550124 = PRESENTATION_STYLE_ASSIGNMENT((#550125)); +#550125 = SURFACE_STYLE_USAGE(.BOTH.,#550126); +#550126 = SURFACE_SIDE_STYLE('',(#550127)); +#550127 = SURFACE_STYLE_FILL_AREA(#550128); +#550128 = FILL_AREA_STYLE('',(#550129)); +#550129 = FILL_AREA_STYLE_COLOUR('',#546242); +#550130 = OVER_RIDING_STYLED_ITEM('overriding color',(#550131),#124385, + #549603); +#550131 = PRESENTATION_STYLE_ASSIGNMENT((#550132)); +#550132 = SURFACE_STYLE_USAGE(.BOTH.,#550133); +#550133 = SURFACE_SIDE_STYLE('',(#550134)); +#550134 = SURFACE_STYLE_FILL_AREA(#550135); +#550135 = FILL_AREA_STYLE('',(#550136)); +#550136 = FILL_AREA_STYLE_COLOUR('',#546242); +#550137 = OVER_RIDING_STYLED_ITEM('overriding color',(#550138),#124409, + #549603); +#550138 = PRESENTATION_STYLE_ASSIGNMENT((#550139)); +#550139 = SURFACE_STYLE_USAGE(.BOTH.,#550140); +#550140 = SURFACE_SIDE_STYLE('',(#550141)); +#550141 = SURFACE_STYLE_FILL_AREA(#550142); +#550142 = FILL_AREA_STYLE('',(#550143)); +#550143 = FILL_AREA_STYLE_COLOUR('',#546242); +#550144 = OVER_RIDING_STYLED_ITEM('overriding color',(#550145),#124433, + #549603); +#550145 = PRESENTATION_STYLE_ASSIGNMENT((#550146)); +#550146 = SURFACE_STYLE_USAGE(.BOTH.,#550147); +#550147 = SURFACE_SIDE_STYLE('',(#550148)); +#550148 = SURFACE_STYLE_FILL_AREA(#550149); +#550149 = FILL_AREA_STYLE('',(#550150)); +#550150 = FILL_AREA_STYLE_COLOUR('',#546242); +#550151 = OVER_RIDING_STYLED_ITEM('overriding color',(#550152),#124457, + #549603); +#550152 = PRESENTATION_STYLE_ASSIGNMENT((#550153)); +#550153 = SURFACE_STYLE_USAGE(.BOTH.,#550154); +#550154 = SURFACE_SIDE_STYLE('',(#550155)); +#550155 = SURFACE_STYLE_FILL_AREA(#550156); +#550156 = FILL_AREA_STYLE('',(#550157)); +#550157 = FILL_AREA_STYLE_COLOUR('',#546242); +#550158 = OVER_RIDING_STYLED_ITEM('overriding color',(#550159),#124481, + #549603); +#550159 = PRESENTATION_STYLE_ASSIGNMENT((#550160)); +#550160 = SURFACE_STYLE_USAGE(.BOTH.,#550161); +#550161 = SURFACE_SIDE_STYLE('',(#550162)); +#550162 = SURFACE_STYLE_FILL_AREA(#550163); +#550163 = FILL_AREA_STYLE('',(#550164)); +#550164 = FILL_AREA_STYLE_COLOUR('',#546242); +#550165 = OVER_RIDING_STYLED_ITEM('overriding color',(#550166),#124505, + #549603); +#550166 = PRESENTATION_STYLE_ASSIGNMENT((#550167)); +#550167 = SURFACE_STYLE_USAGE(.BOTH.,#550168); +#550168 = SURFACE_SIDE_STYLE('',(#550169)); +#550169 = SURFACE_STYLE_FILL_AREA(#550170); +#550170 = FILL_AREA_STYLE('',(#550171)); +#550171 = FILL_AREA_STYLE_COLOUR('',#546242); +#550172 = OVER_RIDING_STYLED_ITEM('overriding color',(#550173),#124529, + #549603); +#550173 = PRESENTATION_STYLE_ASSIGNMENT((#550174)); +#550174 = SURFACE_STYLE_USAGE(.BOTH.,#550175); +#550175 = SURFACE_SIDE_STYLE('',(#550176)); +#550176 = SURFACE_STYLE_FILL_AREA(#550177); +#550177 = FILL_AREA_STYLE('',(#550178)); +#550178 = FILL_AREA_STYLE_COLOUR('',#546242); +#550179 = OVER_RIDING_STYLED_ITEM('overriding color',(#550180),#124553, + #549603); +#550180 = PRESENTATION_STYLE_ASSIGNMENT((#550181)); +#550181 = SURFACE_STYLE_USAGE(.BOTH.,#550182); +#550182 = SURFACE_SIDE_STYLE('',(#550183)); +#550183 = SURFACE_STYLE_FILL_AREA(#550184); +#550184 = FILL_AREA_STYLE('',(#550185)); +#550185 = FILL_AREA_STYLE_COLOUR('',#546242); +#550186 = OVER_RIDING_STYLED_ITEM('overriding color',(#550187),#124577, + #549603); +#550187 = PRESENTATION_STYLE_ASSIGNMENT((#550188)); +#550188 = SURFACE_STYLE_USAGE(.BOTH.,#550189); +#550189 = SURFACE_SIDE_STYLE('',(#550190)); +#550190 = SURFACE_STYLE_FILL_AREA(#550191); +#550191 = FILL_AREA_STYLE('',(#550192)); +#550192 = FILL_AREA_STYLE_COLOUR('',#546242); +#550193 = OVER_RIDING_STYLED_ITEM('overriding color',(#550194),#124601, + #549603); +#550194 = PRESENTATION_STYLE_ASSIGNMENT((#550195)); +#550195 = SURFACE_STYLE_USAGE(.BOTH.,#550196); +#550196 = SURFACE_SIDE_STYLE('',(#550197)); +#550197 = SURFACE_STYLE_FILL_AREA(#550198); +#550198 = FILL_AREA_STYLE('',(#550199)); +#550199 = FILL_AREA_STYLE_COLOUR('',#546242); +#550200 = OVER_RIDING_STYLED_ITEM('overriding color',(#550201),#124625, + #549603); +#550201 = PRESENTATION_STYLE_ASSIGNMENT((#550202)); +#550202 = SURFACE_STYLE_USAGE(.BOTH.,#550203); +#550203 = SURFACE_SIDE_STYLE('',(#550204)); +#550204 = SURFACE_STYLE_FILL_AREA(#550205); +#550205 = FILL_AREA_STYLE('',(#550206)); +#550206 = FILL_AREA_STYLE_COLOUR('',#546242); +#550207 = OVER_RIDING_STYLED_ITEM('overriding color',(#550208),#124649, + #549603); +#550208 = PRESENTATION_STYLE_ASSIGNMENT((#550209)); +#550209 = SURFACE_STYLE_USAGE(.BOTH.,#550210); +#550210 = SURFACE_SIDE_STYLE('',(#550211)); +#550211 = SURFACE_STYLE_FILL_AREA(#550212); +#550212 = FILL_AREA_STYLE('',(#550213)); +#550213 = FILL_AREA_STYLE_COLOUR('',#546242); +#550214 = OVER_RIDING_STYLED_ITEM('overriding color',(#550215),#124673, + #549603); +#550215 = PRESENTATION_STYLE_ASSIGNMENT((#550216)); +#550216 = SURFACE_STYLE_USAGE(.BOTH.,#550217); +#550217 = SURFACE_SIDE_STYLE('',(#550218)); +#550218 = SURFACE_STYLE_FILL_AREA(#550219); +#550219 = FILL_AREA_STYLE('',(#550220)); +#550220 = FILL_AREA_STYLE_COLOUR('',#546242); +#550221 = OVER_RIDING_STYLED_ITEM('overriding color',(#550222),#124697, + #549603); +#550222 = PRESENTATION_STYLE_ASSIGNMENT((#550223)); +#550223 = SURFACE_STYLE_USAGE(.BOTH.,#550224); +#550224 = SURFACE_SIDE_STYLE('',(#550225)); +#550225 = SURFACE_STYLE_FILL_AREA(#550226); +#550226 = FILL_AREA_STYLE('',(#550227)); +#550227 = FILL_AREA_STYLE_COLOUR('',#546242); +#550228 = OVER_RIDING_STYLED_ITEM('overriding color',(#550229),#124721, + #549603); +#550229 = PRESENTATION_STYLE_ASSIGNMENT((#550230)); +#550230 = SURFACE_STYLE_USAGE(.BOTH.,#550231); +#550231 = SURFACE_SIDE_STYLE('',(#550232)); +#550232 = SURFACE_STYLE_FILL_AREA(#550233); +#550233 = FILL_AREA_STYLE('',(#550234)); +#550234 = FILL_AREA_STYLE_COLOUR('',#546242); +#550235 = OVER_RIDING_STYLED_ITEM('overriding color',(#550236),#124745, + #549603); +#550236 = PRESENTATION_STYLE_ASSIGNMENT((#550237)); +#550237 = SURFACE_STYLE_USAGE(.BOTH.,#550238); +#550238 = SURFACE_SIDE_STYLE('',(#550239)); +#550239 = SURFACE_STYLE_FILL_AREA(#550240); +#550240 = FILL_AREA_STYLE('',(#550241)); +#550241 = FILL_AREA_STYLE_COLOUR('',#546242); +#550242 = OVER_RIDING_STYLED_ITEM('overriding color',(#550243),#124769, + #549603); +#550243 = PRESENTATION_STYLE_ASSIGNMENT((#550244)); +#550244 = SURFACE_STYLE_USAGE(.BOTH.,#550245); +#550245 = SURFACE_SIDE_STYLE('',(#550246)); +#550246 = SURFACE_STYLE_FILL_AREA(#550247); +#550247 = FILL_AREA_STYLE('',(#550248)); +#550248 = FILL_AREA_STYLE_COLOUR('',#546242); +#550249 = OVER_RIDING_STYLED_ITEM('overriding color',(#550250),#124793, + #549603); +#550250 = PRESENTATION_STYLE_ASSIGNMENT((#550251)); +#550251 = SURFACE_STYLE_USAGE(.BOTH.,#550252); +#550252 = SURFACE_SIDE_STYLE('',(#550253)); +#550253 = SURFACE_STYLE_FILL_AREA(#550254); +#550254 = FILL_AREA_STYLE('',(#550255)); +#550255 = FILL_AREA_STYLE_COLOUR('',#546242); +#550256 = OVER_RIDING_STYLED_ITEM('overriding color',(#550257),#124817, + #549603); +#550257 = PRESENTATION_STYLE_ASSIGNMENT((#550258)); +#550258 = SURFACE_STYLE_USAGE(.BOTH.,#550259); +#550259 = SURFACE_SIDE_STYLE('',(#550260)); +#550260 = SURFACE_STYLE_FILL_AREA(#550261); +#550261 = FILL_AREA_STYLE('',(#550262)); +#550262 = FILL_AREA_STYLE_COLOUR('',#546242); +#550263 = OVER_RIDING_STYLED_ITEM('overriding color',(#550264),#124841, + #549603); +#550264 = PRESENTATION_STYLE_ASSIGNMENT((#550265)); +#550265 = SURFACE_STYLE_USAGE(.BOTH.,#550266); +#550266 = SURFACE_SIDE_STYLE('',(#550267)); +#550267 = SURFACE_STYLE_FILL_AREA(#550268); +#550268 = FILL_AREA_STYLE('',(#550269)); +#550269 = FILL_AREA_STYLE_COLOUR('',#546242); +#550270 = OVER_RIDING_STYLED_ITEM('overriding color',(#550271),#124865, + #549603); +#550271 = PRESENTATION_STYLE_ASSIGNMENT((#550272)); +#550272 = SURFACE_STYLE_USAGE(.BOTH.,#550273); +#550273 = SURFACE_SIDE_STYLE('',(#550274)); +#550274 = SURFACE_STYLE_FILL_AREA(#550275); +#550275 = FILL_AREA_STYLE('',(#550276)); +#550276 = FILL_AREA_STYLE_COLOUR('',#546242); +#550277 = OVER_RIDING_STYLED_ITEM('overriding color',(#550278),#124889, + #549603); +#550278 = PRESENTATION_STYLE_ASSIGNMENT((#550279)); +#550279 = SURFACE_STYLE_USAGE(.BOTH.,#550280); +#550280 = SURFACE_SIDE_STYLE('',(#550281)); +#550281 = SURFACE_STYLE_FILL_AREA(#550282); +#550282 = FILL_AREA_STYLE('',(#550283)); +#550283 = FILL_AREA_STYLE_COLOUR('',#546242); +#550284 = OVER_RIDING_STYLED_ITEM('overriding color',(#550285),#124913, + #549603); +#550285 = PRESENTATION_STYLE_ASSIGNMENT((#550286)); +#550286 = SURFACE_STYLE_USAGE(.BOTH.,#550287); +#550287 = SURFACE_SIDE_STYLE('',(#550288)); +#550288 = SURFACE_STYLE_FILL_AREA(#550289); +#550289 = FILL_AREA_STYLE('',(#550290)); +#550290 = FILL_AREA_STYLE_COLOUR('',#546242); +#550291 = OVER_RIDING_STYLED_ITEM('overriding color',(#550292),#124937, + #549603); +#550292 = PRESENTATION_STYLE_ASSIGNMENT((#550293)); +#550293 = SURFACE_STYLE_USAGE(.BOTH.,#550294); +#550294 = SURFACE_SIDE_STYLE('',(#550295)); +#550295 = SURFACE_STYLE_FILL_AREA(#550296); +#550296 = FILL_AREA_STYLE('',(#550297)); +#550297 = FILL_AREA_STYLE_COLOUR('',#546242); +#550298 = OVER_RIDING_STYLED_ITEM('overriding color',(#550299),#124961, + #549603); +#550299 = PRESENTATION_STYLE_ASSIGNMENT((#550300)); +#550300 = SURFACE_STYLE_USAGE(.BOTH.,#550301); +#550301 = SURFACE_SIDE_STYLE('',(#550302)); +#550302 = SURFACE_STYLE_FILL_AREA(#550303); +#550303 = FILL_AREA_STYLE('',(#550304)); +#550304 = FILL_AREA_STYLE_COLOUR('',#546242); +#550305 = OVER_RIDING_STYLED_ITEM('overriding color',(#550306),#124985, + #549603); +#550306 = PRESENTATION_STYLE_ASSIGNMENT((#550307)); +#550307 = SURFACE_STYLE_USAGE(.BOTH.,#550308); +#550308 = SURFACE_SIDE_STYLE('',(#550309)); +#550309 = SURFACE_STYLE_FILL_AREA(#550310); +#550310 = FILL_AREA_STYLE('',(#550311)); +#550311 = FILL_AREA_STYLE_COLOUR('',#546242); +#550312 = OVER_RIDING_STYLED_ITEM('overriding color',(#550313),#125009, + #549603); +#550313 = PRESENTATION_STYLE_ASSIGNMENT((#550314)); +#550314 = SURFACE_STYLE_USAGE(.BOTH.,#550315); +#550315 = SURFACE_SIDE_STYLE('',(#550316)); +#550316 = SURFACE_STYLE_FILL_AREA(#550317); +#550317 = FILL_AREA_STYLE('',(#550318)); +#550318 = FILL_AREA_STYLE_COLOUR('',#546242); +#550319 = OVER_RIDING_STYLED_ITEM('overriding color',(#550320),#125033, + #549603); +#550320 = PRESENTATION_STYLE_ASSIGNMENT((#550321)); +#550321 = SURFACE_STYLE_USAGE(.BOTH.,#550322); +#550322 = SURFACE_SIDE_STYLE('',(#550323)); +#550323 = SURFACE_STYLE_FILL_AREA(#550324); +#550324 = FILL_AREA_STYLE('',(#550325)); +#550325 = FILL_AREA_STYLE_COLOUR('',#546242); +#550326 = OVER_RIDING_STYLED_ITEM('overriding color',(#550327),#125057, + #549603); +#550327 = PRESENTATION_STYLE_ASSIGNMENT((#550328)); +#550328 = SURFACE_STYLE_USAGE(.BOTH.,#550329); +#550329 = SURFACE_SIDE_STYLE('',(#550330)); +#550330 = SURFACE_STYLE_FILL_AREA(#550331); +#550331 = FILL_AREA_STYLE('',(#550332)); +#550332 = FILL_AREA_STYLE_COLOUR('',#546242); +#550333 = OVER_RIDING_STYLED_ITEM('overriding color',(#550334),#125074, + #549603); +#550334 = PRESENTATION_STYLE_ASSIGNMENT((#550335)); +#550335 = SURFACE_STYLE_USAGE(.BOTH.,#550336); +#550336 = SURFACE_SIDE_STYLE('',(#550337)); +#550337 = SURFACE_STYLE_FILL_AREA(#550338); +#550338 = FILL_AREA_STYLE('',(#550339)); +#550339 = FILL_AREA_STYLE_COLOUR('',#546242); +#550340 = OVER_RIDING_STYLED_ITEM('overriding color',(#550341),#125284, + #549603); +#550341 = PRESENTATION_STYLE_ASSIGNMENT((#550342)); +#550342 = SURFACE_STYLE_USAGE(.BOTH.,#550343); +#550343 = SURFACE_SIDE_STYLE('',(#550344)); +#550344 = SURFACE_STYLE_FILL_AREA(#550345); +#550345 = FILL_AREA_STYLE('',(#550346)); +#550346 = FILL_AREA_STYLE_COLOUR('',#546242); +#550347 = OVER_RIDING_STYLED_ITEM('overriding color',(#550348),#125646, + #549603); +#550348 = PRESENTATION_STYLE_ASSIGNMENT((#550349)); +#550349 = SURFACE_STYLE_USAGE(.BOTH.,#550350); +#550350 = SURFACE_SIDE_STYLE('',(#550351)); +#550351 = SURFACE_STYLE_FILL_AREA(#550352); +#550352 = FILL_AREA_STYLE('',(#550353)); +#550353 = FILL_AREA_STYLE_COLOUR('',#546242); +#550354 = OVER_RIDING_STYLED_ITEM('overriding color',(#550355),#125970, + #549603); +#550355 = PRESENTATION_STYLE_ASSIGNMENT((#550356)); +#550356 = SURFACE_STYLE_USAGE(.BOTH.,#550357); +#550357 = SURFACE_SIDE_STYLE('',(#550358)); +#550358 = SURFACE_STYLE_FILL_AREA(#550359); +#550359 = FILL_AREA_STYLE('',(#550360)); +#550360 = FILL_AREA_STYLE_COLOUR('',#546242); +#550361 = OVER_RIDING_STYLED_ITEM('overriding color',(#550362),#125992, + #549603); +#550362 = PRESENTATION_STYLE_ASSIGNMENT((#550363)); +#550363 = SURFACE_STYLE_USAGE(.BOTH.,#550364); +#550364 = SURFACE_SIDE_STYLE('',(#550365)); +#550365 = SURFACE_STYLE_FILL_AREA(#550366); +#550366 = FILL_AREA_STYLE('',(#550367)); +#550367 = FILL_AREA_STYLE_COLOUR('',#546242); +#550368 = OVER_RIDING_STYLED_ITEM('overriding color',(#550369),#126009, + #549603); +#550369 = PRESENTATION_STYLE_ASSIGNMENT((#550370)); +#550370 = SURFACE_STYLE_USAGE(.BOTH.,#550371); +#550371 = SURFACE_SIDE_STYLE('',(#550372)); +#550372 = SURFACE_STYLE_FILL_AREA(#550373); +#550373 = FILL_AREA_STYLE('',(#550374)); +#550374 = FILL_AREA_STYLE_COLOUR('',#546242); +#550375 = OVER_RIDING_STYLED_ITEM('overriding color',(#550376),#126026, + #549603); +#550376 = PRESENTATION_STYLE_ASSIGNMENT((#550377)); +#550377 = SURFACE_STYLE_USAGE(.BOTH.,#550378); +#550378 = SURFACE_SIDE_STYLE('',(#550379)); +#550379 = SURFACE_STYLE_FILL_AREA(#550380); +#550380 = FILL_AREA_STYLE('',(#550381)); +#550381 = FILL_AREA_STYLE_COLOUR('',#546242); +#550382 = OVER_RIDING_STYLED_ITEM('overriding color',(#550383),#126043, + #549603); +#550383 = PRESENTATION_STYLE_ASSIGNMENT((#550384)); +#550384 = SURFACE_STYLE_USAGE(.BOTH.,#550385); +#550385 = SURFACE_SIDE_STYLE('',(#550386)); +#550386 = SURFACE_STYLE_FILL_AREA(#550387); +#550387 = FILL_AREA_STYLE('',(#550388)); +#550388 = FILL_AREA_STYLE_COLOUR('',#546242); +#550389 = OVER_RIDING_STYLED_ITEM('overriding color',(#550390),#126060, + #549603); +#550390 = PRESENTATION_STYLE_ASSIGNMENT((#550391)); +#550391 = SURFACE_STYLE_USAGE(.BOTH.,#550392); +#550392 = SURFACE_SIDE_STYLE('',(#550393)); +#550393 = SURFACE_STYLE_FILL_AREA(#550394); +#550394 = FILL_AREA_STYLE('',(#550395)); +#550395 = FILL_AREA_STYLE_COLOUR('',#546242); +#550396 = OVER_RIDING_STYLED_ITEM('overriding color',(#550397),#126077, + #549603); +#550397 = PRESENTATION_STYLE_ASSIGNMENT((#550398)); +#550398 = SURFACE_STYLE_USAGE(.BOTH.,#550399); +#550399 = SURFACE_SIDE_STYLE('',(#550400)); +#550400 = SURFACE_STYLE_FILL_AREA(#550401); +#550401 = FILL_AREA_STYLE('',(#550402)); +#550402 = FILL_AREA_STYLE_COLOUR('',#546242); +#550403 = OVER_RIDING_STYLED_ITEM('overriding color',(#550404),#126094, + #549603); +#550404 = PRESENTATION_STYLE_ASSIGNMENT((#550405)); +#550405 = SURFACE_STYLE_USAGE(.BOTH.,#550406); +#550406 = SURFACE_SIDE_STYLE('',(#550407)); +#550407 = SURFACE_STYLE_FILL_AREA(#550408); +#550408 = FILL_AREA_STYLE('',(#550409)); +#550409 = FILL_AREA_STYLE_COLOUR('',#546242); +#550410 = OVER_RIDING_STYLED_ITEM('overriding color',(#550411),#126111, + #549603); +#550411 = PRESENTATION_STYLE_ASSIGNMENT((#550412)); +#550412 = SURFACE_STYLE_USAGE(.BOTH.,#550413); +#550413 = SURFACE_SIDE_STYLE('',(#550414)); +#550414 = SURFACE_STYLE_FILL_AREA(#550415); +#550415 = FILL_AREA_STYLE('',(#550416)); +#550416 = FILL_AREA_STYLE_COLOUR('',#546242); +#550417 = OVER_RIDING_STYLED_ITEM('overriding color',(#550418),#126128, + #549603); +#550418 = PRESENTATION_STYLE_ASSIGNMENT((#550419)); +#550419 = SURFACE_STYLE_USAGE(.BOTH.,#550420); +#550420 = SURFACE_SIDE_STYLE('',(#550421)); +#550421 = SURFACE_STYLE_FILL_AREA(#550422); +#550422 = FILL_AREA_STYLE('',(#550423)); +#550423 = FILL_AREA_STYLE_COLOUR('',#546242); +#550424 = OVER_RIDING_STYLED_ITEM('overriding color',(#550425),#126145, + #549603); +#550425 = PRESENTATION_STYLE_ASSIGNMENT((#550426)); +#550426 = SURFACE_STYLE_USAGE(.BOTH.,#550427); +#550427 = SURFACE_SIDE_STYLE('',(#550428)); +#550428 = SURFACE_STYLE_FILL_AREA(#550429); +#550429 = FILL_AREA_STYLE('',(#550430)); +#550430 = FILL_AREA_STYLE_COLOUR('',#546242); +#550431 = OVER_RIDING_STYLED_ITEM('overriding color',(#550432),#126162, + #549603); +#550432 = PRESENTATION_STYLE_ASSIGNMENT((#550433)); +#550433 = SURFACE_STYLE_USAGE(.BOTH.,#550434); +#550434 = SURFACE_SIDE_STYLE('',(#550435)); +#550435 = SURFACE_STYLE_FILL_AREA(#550436); +#550436 = FILL_AREA_STYLE('',(#550437)); +#550437 = FILL_AREA_STYLE_COLOUR('',#546242); +#550438 = OVER_RIDING_STYLED_ITEM('overriding color',(#550439),#126179, + #549603); +#550439 = PRESENTATION_STYLE_ASSIGNMENT((#550440)); +#550440 = SURFACE_STYLE_USAGE(.BOTH.,#550441); +#550441 = SURFACE_SIDE_STYLE('',(#550442)); +#550442 = SURFACE_STYLE_FILL_AREA(#550443); +#550443 = FILL_AREA_STYLE('',(#550444)); +#550444 = FILL_AREA_STYLE_COLOUR('',#546242); +#550445 = OVER_RIDING_STYLED_ITEM('overriding color',(#550446),#126196, + #549603); +#550446 = PRESENTATION_STYLE_ASSIGNMENT((#550447)); +#550447 = SURFACE_STYLE_USAGE(.BOTH.,#550448); +#550448 = SURFACE_SIDE_STYLE('',(#550449)); +#550449 = SURFACE_STYLE_FILL_AREA(#550450); +#550450 = FILL_AREA_STYLE('',(#550451)); +#550451 = FILL_AREA_STYLE_COLOUR('',#546242); +#550452 = OVER_RIDING_STYLED_ITEM('overriding color',(#550453),#126213, + #549603); +#550453 = PRESENTATION_STYLE_ASSIGNMENT((#550454)); +#550454 = SURFACE_STYLE_USAGE(.BOTH.,#550455); +#550455 = SURFACE_SIDE_STYLE('',(#550456)); +#550456 = SURFACE_STYLE_FILL_AREA(#550457); +#550457 = FILL_AREA_STYLE('',(#550458)); +#550458 = FILL_AREA_STYLE_COLOUR('',#546242); +#550459 = OVER_RIDING_STYLED_ITEM('overriding color',(#550460),#126230, + #549603); +#550460 = PRESENTATION_STYLE_ASSIGNMENT((#550461)); +#550461 = SURFACE_STYLE_USAGE(.BOTH.,#550462); +#550462 = SURFACE_SIDE_STYLE('',(#550463)); +#550463 = SURFACE_STYLE_FILL_AREA(#550464); +#550464 = FILL_AREA_STYLE('',(#550465)); +#550465 = FILL_AREA_STYLE_COLOUR('',#546242); +#550466 = OVER_RIDING_STYLED_ITEM('overriding color',(#550467),#126247, + #549603); +#550467 = PRESENTATION_STYLE_ASSIGNMENT((#550468)); +#550468 = SURFACE_STYLE_USAGE(.BOTH.,#550469); +#550469 = SURFACE_SIDE_STYLE('',(#550470)); +#550470 = SURFACE_STYLE_FILL_AREA(#550471); +#550471 = FILL_AREA_STYLE('',(#550472)); +#550472 = FILL_AREA_STYLE_COLOUR('',#546242); +#550473 = OVER_RIDING_STYLED_ITEM('overriding color',(#550474),#126264, + #549603); +#550474 = PRESENTATION_STYLE_ASSIGNMENT((#550475)); +#550475 = SURFACE_STYLE_USAGE(.BOTH.,#550476); +#550476 = SURFACE_SIDE_STYLE('',(#550477)); +#550477 = SURFACE_STYLE_FILL_AREA(#550478); +#550478 = FILL_AREA_STYLE('',(#550479)); +#550479 = FILL_AREA_STYLE_COLOUR('',#546242); +#550480 = OVER_RIDING_STYLED_ITEM('overriding color',(#550481),#126281, + #549603); +#550481 = PRESENTATION_STYLE_ASSIGNMENT((#550482)); +#550482 = SURFACE_STYLE_USAGE(.BOTH.,#550483); +#550483 = SURFACE_SIDE_STYLE('',(#550484)); +#550484 = SURFACE_STYLE_FILL_AREA(#550485); +#550485 = FILL_AREA_STYLE('',(#550486)); +#550486 = FILL_AREA_STYLE_COLOUR('',#546242); +#550487 = OVER_RIDING_STYLED_ITEM('overriding color',(#550488),#126298, + #549603); +#550488 = PRESENTATION_STYLE_ASSIGNMENT((#550489)); +#550489 = SURFACE_STYLE_USAGE(.BOTH.,#550490); +#550490 = SURFACE_SIDE_STYLE('',(#550491)); +#550491 = SURFACE_STYLE_FILL_AREA(#550492); +#550492 = FILL_AREA_STYLE('',(#550493)); +#550493 = FILL_AREA_STYLE_COLOUR('',#546242); +#550494 = OVER_RIDING_STYLED_ITEM('overriding color',(#550495),#126310, + #549603); +#550495 = PRESENTATION_STYLE_ASSIGNMENT((#550496)); +#550496 = SURFACE_STYLE_USAGE(.BOTH.,#550497); +#550497 = SURFACE_SIDE_STYLE('',(#550498)); +#550498 = SURFACE_STYLE_FILL_AREA(#550499); +#550499 = FILL_AREA_STYLE('',(#550500)); +#550500 = FILL_AREA_STYLE_COLOUR('',#546242); +#550501 = OVER_RIDING_STYLED_ITEM('overriding color',(#550502),#126332, + #549603); +#550502 = PRESENTATION_STYLE_ASSIGNMENT((#550503)); +#550503 = SURFACE_STYLE_USAGE(.BOTH.,#550504); +#550504 = SURFACE_SIDE_STYLE('',(#550505)); +#550505 = SURFACE_STYLE_FILL_AREA(#550506); +#550506 = FILL_AREA_STYLE('',(#550507)); +#550507 = FILL_AREA_STYLE_COLOUR('',#546242); +#550508 = OVER_RIDING_STYLED_ITEM('overriding color',(#550509),#126349, + #549603); +#550509 = PRESENTATION_STYLE_ASSIGNMENT((#550510)); +#550510 = SURFACE_STYLE_USAGE(.BOTH.,#550511); +#550511 = SURFACE_SIDE_STYLE('',(#550512)); +#550512 = SURFACE_STYLE_FILL_AREA(#550513); +#550513 = FILL_AREA_STYLE('',(#550514)); +#550514 = FILL_AREA_STYLE_COLOUR('',#546242); +#550515 = OVER_RIDING_STYLED_ITEM('overriding color',(#550516),#126366, + #549603); +#550516 = PRESENTATION_STYLE_ASSIGNMENT((#550517)); +#550517 = SURFACE_STYLE_USAGE(.BOTH.,#550518); +#550518 = SURFACE_SIDE_STYLE('',(#550519)); +#550519 = SURFACE_STYLE_FILL_AREA(#550520); +#550520 = FILL_AREA_STYLE('',(#550521)); +#550521 = FILL_AREA_STYLE_COLOUR('',#546242); +#550522 = OVER_RIDING_STYLED_ITEM('overriding color',(#550523),#126383, + #549603); +#550523 = PRESENTATION_STYLE_ASSIGNMENT((#550524)); +#550524 = SURFACE_STYLE_USAGE(.BOTH.,#550525); +#550525 = SURFACE_SIDE_STYLE('',(#550526)); +#550526 = SURFACE_STYLE_FILL_AREA(#550527); +#550527 = FILL_AREA_STYLE('',(#550528)); +#550528 = FILL_AREA_STYLE_COLOUR('',#546242); +#550529 = OVER_RIDING_STYLED_ITEM('overriding color',(#550530),#126400, + #549603); +#550530 = PRESENTATION_STYLE_ASSIGNMENT((#550531)); +#550531 = SURFACE_STYLE_USAGE(.BOTH.,#550532); +#550532 = SURFACE_SIDE_STYLE('',(#550533)); +#550533 = SURFACE_STYLE_FILL_AREA(#550534); +#550534 = FILL_AREA_STYLE('',(#550535)); +#550535 = FILL_AREA_STYLE_COLOUR('',#546242); +#550536 = OVER_RIDING_STYLED_ITEM('overriding color',(#550537),#126417, + #549603); +#550537 = PRESENTATION_STYLE_ASSIGNMENT((#550538)); +#550538 = SURFACE_STYLE_USAGE(.BOTH.,#550539); +#550539 = SURFACE_SIDE_STYLE('',(#550540)); +#550540 = SURFACE_STYLE_FILL_AREA(#550541); +#550541 = FILL_AREA_STYLE('',(#550542)); +#550542 = FILL_AREA_STYLE_COLOUR('',#546242); +#550543 = OVER_RIDING_STYLED_ITEM('overriding color',(#550544),#126434, + #549603); +#550544 = PRESENTATION_STYLE_ASSIGNMENT((#550545)); +#550545 = SURFACE_STYLE_USAGE(.BOTH.,#550546); +#550546 = SURFACE_SIDE_STYLE('',(#550547)); +#550547 = SURFACE_STYLE_FILL_AREA(#550548); +#550548 = FILL_AREA_STYLE('',(#550549)); +#550549 = FILL_AREA_STYLE_COLOUR('',#546242); +#550550 = OVER_RIDING_STYLED_ITEM('overriding color',(#550551),#126451, + #549603); +#550551 = PRESENTATION_STYLE_ASSIGNMENT((#550552)); +#550552 = SURFACE_STYLE_USAGE(.BOTH.,#550553); +#550553 = SURFACE_SIDE_STYLE('',(#550554)); +#550554 = SURFACE_STYLE_FILL_AREA(#550555); +#550555 = FILL_AREA_STYLE('',(#550556)); +#550556 = FILL_AREA_STYLE_COLOUR('',#546242); +#550557 = OVER_RIDING_STYLED_ITEM('overriding color',(#550558),#126468, + #549603); +#550558 = PRESENTATION_STYLE_ASSIGNMENT((#550559)); +#550559 = SURFACE_STYLE_USAGE(.BOTH.,#550560); +#550560 = SURFACE_SIDE_STYLE('',(#550561)); +#550561 = SURFACE_STYLE_FILL_AREA(#550562); +#550562 = FILL_AREA_STYLE('',(#550563)); +#550563 = FILL_AREA_STYLE_COLOUR('',#546242); +#550564 = OVER_RIDING_STYLED_ITEM('overriding color',(#550565),#126485, + #549603); +#550565 = PRESENTATION_STYLE_ASSIGNMENT((#550566)); +#550566 = SURFACE_STYLE_USAGE(.BOTH.,#550567); +#550567 = SURFACE_SIDE_STYLE('',(#550568)); +#550568 = SURFACE_STYLE_FILL_AREA(#550569); +#550569 = FILL_AREA_STYLE('',(#550570)); +#550570 = FILL_AREA_STYLE_COLOUR('',#546242); +#550571 = OVER_RIDING_STYLED_ITEM('overriding color',(#550572),#126502, + #549603); +#550572 = PRESENTATION_STYLE_ASSIGNMENT((#550573)); +#550573 = SURFACE_STYLE_USAGE(.BOTH.,#550574); +#550574 = SURFACE_SIDE_STYLE('',(#550575)); +#550575 = SURFACE_STYLE_FILL_AREA(#550576); +#550576 = FILL_AREA_STYLE('',(#550577)); +#550577 = FILL_AREA_STYLE_COLOUR('',#546242); +#550578 = OVER_RIDING_STYLED_ITEM('overriding color',(#550579),#126519, + #549603); +#550579 = PRESENTATION_STYLE_ASSIGNMENT((#550580)); +#550580 = SURFACE_STYLE_USAGE(.BOTH.,#550581); +#550581 = SURFACE_SIDE_STYLE('',(#550582)); +#550582 = SURFACE_STYLE_FILL_AREA(#550583); +#550583 = FILL_AREA_STYLE('',(#550584)); +#550584 = FILL_AREA_STYLE_COLOUR('',#546242); +#550585 = OVER_RIDING_STYLED_ITEM('overriding color',(#550586),#126536, + #549603); +#550586 = PRESENTATION_STYLE_ASSIGNMENT((#550587)); +#550587 = SURFACE_STYLE_USAGE(.BOTH.,#550588); +#550588 = SURFACE_SIDE_STYLE('',(#550589)); +#550589 = SURFACE_STYLE_FILL_AREA(#550590); +#550590 = FILL_AREA_STYLE('',(#550591)); +#550591 = FILL_AREA_STYLE_COLOUR('',#546242); +#550592 = OVER_RIDING_STYLED_ITEM('overriding color',(#550593),#126553, + #549603); +#550593 = PRESENTATION_STYLE_ASSIGNMENT((#550594)); +#550594 = SURFACE_STYLE_USAGE(.BOTH.,#550595); +#550595 = SURFACE_SIDE_STYLE('',(#550596)); +#550596 = SURFACE_STYLE_FILL_AREA(#550597); +#550597 = FILL_AREA_STYLE('',(#550598)); +#550598 = FILL_AREA_STYLE_COLOUR('',#546242); +#550599 = OVER_RIDING_STYLED_ITEM('overriding color',(#550600),#126570, + #549603); +#550600 = PRESENTATION_STYLE_ASSIGNMENT((#550601)); +#550601 = SURFACE_STYLE_USAGE(.BOTH.,#550602); +#550602 = SURFACE_SIDE_STYLE('',(#550603)); +#550603 = SURFACE_STYLE_FILL_AREA(#550604); +#550604 = FILL_AREA_STYLE('',(#550605)); +#550605 = FILL_AREA_STYLE_COLOUR('',#546242); +#550606 = OVER_RIDING_STYLED_ITEM('overriding color',(#550607),#126587, + #549603); +#550607 = PRESENTATION_STYLE_ASSIGNMENT((#550608)); +#550608 = SURFACE_STYLE_USAGE(.BOTH.,#550609); +#550609 = SURFACE_SIDE_STYLE('',(#550610)); +#550610 = SURFACE_STYLE_FILL_AREA(#550611); +#550611 = FILL_AREA_STYLE('',(#550612)); +#550612 = FILL_AREA_STYLE_COLOUR('',#546242); +#550613 = OVER_RIDING_STYLED_ITEM('overriding color',(#550614),#126604, + #549603); +#550614 = PRESENTATION_STYLE_ASSIGNMENT((#550615)); +#550615 = SURFACE_STYLE_USAGE(.BOTH.,#550616); +#550616 = SURFACE_SIDE_STYLE('',(#550617)); +#550617 = SURFACE_STYLE_FILL_AREA(#550618); +#550618 = FILL_AREA_STYLE('',(#550619)); +#550619 = FILL_AREA_STYLE_COLOUR('',#546242); +#550620 = OVER_RIDING_STYLED_ITEM('overriding color',(#550621),#126621, + #549603); +#550621 = PRESENTATION_STYLE_ASSIGNMENT((#550622)); +#550622 = SURFACE_STYLE_USAGE(.BOTH.,#550623); +#550623 = SURFACE_SIDE_STYLE('',(#550624)); +#550624 = SURFACE_STYLE_FILL_AREA(#550625); +#550625 = FILL_AREA_STYLE('',(#550626)); +#550626 = FILL_AREA_STYLE_COLOUR('',#546242); +#550627 = OVER_RIDING_STYLED_ITEM('overriding color',(#550628),#126638, + #549603); +#550628 = PRESENTATION_STYLE_ASSIGNMENT((#550629)); +#550629 = SURFACE_STYLE_USAGE(.BOTH.,#550630); +#550630 = SURFACE_SIDE_STYLE('',(#550631)); +#550631 = SURFACE_STYLE_FILL_AREA(#550632); +#550632 = FILL_AREA_STYLE('',(#550633)); +#550633 = FILL_AREA_STYLE_COLOUR('',#546242); +#550634 = OVER_RIDING_STYLED_ITEM('overriding color',(#550635),#126655, + #549603); +#550635 = PRESENTATION_STYLE_ASSIGNMENT((#550636)); +#550636 = SURFACE_STYLE_USAGE(.BOTH.,#550637); +#550637 = SURFACE_SIDE_STYLE('',(#550638)); +#550638 = SURFACE_STYLE_FILL_AREA(#550639); +#550639 = FILL_AREA_STYLE('',(#550640)); +#550640 = FILL_AREA_STYLE_COLOUR('',#546242); +#550641 = OVER_RIDING_STYLED_ITEM('overriding color',(#550642),#126672, + #549603); +#550642 = PRESENTATION_STYLE_ASSIGNMENT((#550643)); +#550643 = SURFACE_STYLE_USAGE(.BOTH.,#550644); +#550644 = SURFACE_SIDE_STYLE('',(#550645)); +#550645 = SURFACE_STYLE_FILL_AREA(#550646); +#550646 = FILL_AREA_STYLE('',(#550647)); +#550647 = FILL_AREA_STYLE_COLOUR('',#546242); +#550648 = OVER_RIDING_STYLED_ITEM('overriding color',(#550649),#126689, + #549603); +#550649 = PRESENTATION_STYLE_ASSIGNMENT((#550650)); +#550650 = SURFACE_STYLE_USAGE(.BOTH.,#550651); +#550651 = SURFACE_SIDE_STYLE('',(#550652)); +#550652 = SURFACE_STYLE_FILL_AREA(#550653); +#550653 = FILL_AREA_STYLE('',(#550654)); +#550654 = FILL_AREA_STYLE_COLOUR('',#546242); +#550655 = OVER_RIDING_STYLED_ITEM('overriding color',(#550656),#126706, + #549603); +#550656 = PRESENTATION_STYLE_ASSIGNMENT((#550657)); +#550657 = SURFACE_STYLE_USAGE(.BOTH.,#550658); +#550658 = SURFACE_SIDE_STYLE('',(#550659)); +#550659 = SURFACE_STYLE_FILL_AREA(#550660); +#550660 = FILL_AREA_STYLE('',(#550661)); +#550661 = FILL_AREA_STYLE_COLOUR('',#546242); +#550662 = OVER_RIDING_STYLED_ITEM('overriding color',(#550663),#126723, + #549603); +#550663 = PRESENTATION_STYLE_ASSIGNMENT((#550664)); +#550664 = SURFACE_STYLE_USAGE(.BOTH.,#550665); +#550665 = SURFACE_SIDE_STYLE('',(#550666)); +#550666 = SURFACE_STYLE_FILL_AREA(#550667); +#550667 = FILL_AREA_STYLE('',(#550668)); +#550668 = FILL_AREA_STYLE_COLOUR('',#546242); +#550669 = OVER_RIDING_STYLED_ITEM('overriding color',(#550670),#126740, + #549603); +#550670 = PRESENTATION_STYLE_ASSIGNMENT((#550671)); +#550671 = SURFACE_STYLE_USAGE(.BOTH.,#550672); +#550672 = SURFACE_SIDE_STYLE('',(#550673)); +#550673 = SURFACE_STYLE_FILL_AREA(#550674); +#550674 = FILL_AREA_STYLE('',(#550675)); +#550675 = FILL_AREA_STYLE_COLOUR('',#546242); +#550676 = OVER_RIDING_STYLED_ITEM('overriding color',(#550677),#126752, + #549603); +#550677 = PRESENTATION_STYLE_ASSIGNMENT((#550678)); +#550678 = SURFACE_STYLE_USAGE(.BOTH.,#550679); +#550679 = SURFACE_SIDE_STYLE('',(#550680)); +#550680 = SURFACE_STYLE_FILL_AREA(#550681); +#550681 = FILL_AREA_STYLE('',(#550682)); +#550682 = FILL_AREA_STYLE_COLOUR('',#546242); +#550683 = OVER_RIDING_STYLED_ITEM('overriding color',(#550684),#126774, + #549603); +#550684 = PRESENTATION_STYLE_ASSIGNMENT((#550685)); +#550685 = SURFACE_STYLE_USAGE(.BOTH.,#550686); +#550686 = SURFACE_SIDE_STYLE('',(#550687)); +#550687 = SURFACE_STYLE_FILL_AREA(#550688); +#550688 = FILL_AREA_STYLE('',(#550689)); +#550689 = FILL_AREA_STYLE_COLOUR('',#546242); +#550690 = OVER_RIDING_STYLED_ITEM('overriding color',(#550691),#126791, + #549603); +#550691 = PRESENTATION_STYLE_ASSIGNMENT((#550692)); +#550692 = SURFACE_STYLE_USAGE(.BOTH.,#550693); +#550693 = SURFACE_SIDE_STYLE('',(#550694)); +#550694 = SURFACE_STYLE_FILL_AREA(#550695); +#550695 = FILL_AREA_STYLE('',(#550696)); +#550696 = FILL_AREA_STYLE_COLOUR('',#546242); +#550697 = OVER_RIDING_STYLED_ITEM('overriding color',(#550698),#126808, + #549603); +#550698 = PRESENTATION_STYLE_ASSIGNMENT((#550699)); +#550699 = SURFACE_STYLE_USAGE(.BOTH.,#550700); +#550700 = SURFACE_SIDE_STYLE('',(#550701)); +#550701 = SURFACE_STYLE_FILL_AREA(#550702); +#550702 = FILL_AREA_STYLE('',(#550703)); +#550703 = FILL_AREA_STYLE_COLOUR('',#546242); +#550704 = OVER_RIDING_STYLED_ITEM('overriding color',(#550705),#126825, + #549603); +#550705 = PRESENTATION_STYLE_ASSIGNMENT((#550706)); +#550706 = SURFACE_STYLE_USAGE(.BOTH.,#550707); +#550707 = SURFACE_SIDE_STYLE('',(#550708)); +#550708 = SURFACE_STYLE_FILL_AREA(#550709); +#550709 = FILL_AREA_STYLE('',(#550710)); +#550710 = FILL_AREA_STYLE_COLOUR('',#546242); +#550711 = OVER_RIDING_STYLED_ITEM('overriding color',(#550712),#126842, + #549603); +#550712 = PRESENTATION_STYLE_ASSIGNMENT((#550713)); +#550713 = SURFACE_STYLE_USAGE(.BOTH.,#550714); +#550714 = SURFACE_SIDE_STYLE('',(#550715)); +#550715 = SURFACE_STYLE_FILL_AREA(#550716); +#550716 = FILL_AREA_STYLE('',(#550717)); +#550717 = FILL_AREA_STYLE_COLOUR('',#546242); +#550718 = OVER_RIDING_STYLED_ITEM('overriding color',(#550719),#126859, + #549603); +#550719 = PRESENTATION_STYLE_ASSIGNMENT((#550720)); +#550720 = SURFACE_STYLE_USAGE(.BOTH.,#550721); +#550721 = SURFACE_SIDE_STYLE('',(#550722)); +#550722 = SURFACE_STYLE_FILL_AREA(#550723); +#550723 = FILL_AREA_STYLE('',(#550724)); +#550724 = FILL_AREA_STYLE_COLOUR('',#546242); +#550725 = OVER_RIDING_STYLED_ITEM('overriding color',(#550726),#126876, + #549603); +#550726 = PRESENTATION_STYLE_ASSIGNMENT((#550727)); +#550727 = SURFACE_STYLE_USAGE(.BOTH.,#550728); +#550728 = SURFACE_SIDE_STYLE('',(#550729)); +#550729 = SURFACE_STYLE_FILL_AREA(#550730); +#550730 = FILL_AREA_STYLE('',(#550731)); +#550731 = FILL_AREA_STYLE_COLOUR('',#546242); +#550732 = OVER_RIDING_STYLED_ITEM('overriding color',(#550733),#126893, + #549603); +#550733 = PRESENTATION_STYLE_ASSIGNMENT((#550734)); +#550734 = SURFACE_STYLE_USAGE(.BOTH.,#550735); +#550735 = SURFACE_SIDE_STYLE('',(#550736)); +#550736 = SURFACE_STYLE_FILL_AREA(#550737); +#550737 = FILL_AREA_STYLE('',(#550738)); +#550738 = FILL_AREA_STYLE_COLOUR('',#546242); +#550739 = OVER_RIDING_STYLED_ITEM('overriding color',(#550740),#126910, + #549603); +#550740 = PRESENTATION_STYLE_ASSIGNMENT((#550741)); +#550741 = SURFACE_STYLE_USAGE(.BOTH.,#550742); +#550742 = SURFACE_SIDE_STYLE('',(#550743)); +#550743 = SURFACE_STYLE_FILL_AREA(#550744); +#550744 = FILL_AREA_STYLE('',(#550745)); +#550745 = FILL_AREA_STYLE_COLOUR('',#546242); +#550746 = OVER_RIDING_STYLED_ITEM('overriding color',(#550747),#126927, + #549603); +#550747 = PRESENTATION_STYLE_ASSIGNMENT((#550748)); +#550748 = SURFACE_STYLE_USAGE(.BOTH.,#550749); +#550749 = SURFACE_SIDE_STYLE('',(#550750)); +#550750 = SURFACE_STYLE_FILL_AREA(#550751); +#550751 = FILL_AREA_STYLE('',(#550752)); +#550752 = FILL_AREA_STYLE_COLOUR('',#546242); +#550753 = OVER_RIDING_STYLED_ITEM('overriding color',(#550754),#126944, + #549603); +#550754 = PRESENTATION_STYLE_ASSIGNMENT((#550755)); +#550755 = SURFACE_STYLE_USAGE(.BOTH.,#550756); +#550756 = SURFACE_SIDE_STYLE('',(#550757)); +#550757 = SURFACE_STYLE_FILL_AREA(#550758); +#550758 = FILL_AREA_STYLE('',(#550759)); +#550759 = FILL_AREA_STYLE_COLOUR('',#546242); +#550760 = OVER_RIDING_STYLED_ITEM('overriding color',(#550761),#126961, + #549603); +#550761 = PRESENTATION_STYLE_ASSIGNMENT((#550762)); +#550762 = SURFACE_STYLE_USAGE(.BOTH.,#550763); +#550763 = SURFACE_SIDE_STYLE('',(#550764)); +#550764 = SURFACE_STYLE_FILL_AREA(#550765); +#550765 = FILL_AREA_STYLE('',(#550766)); +#550766 = FILL_AREA_STYLE_COLOUR('',#546242); +#550767 = OVER_RIDING_STYLED_ITEM('overriding color',(#550768),#126978, + #549603); +#550768 = PRESENTATION_STYLE_ASSIGNMENT((#550769)); +#550769 = SURFACE_STYLE_USAGE(.BOTH.,#550770); +#550770 = SURFACE_SIDE_STYLE('',(#550771)); +#550771 = SURFACE_STYLE_FILL_AREA(#550772); +#550772 = FILL_AREA_STYLE('',(#550773)); +#550773 = FILL_AREA_STYLE_COLOUR('',#546242); +#550774 = OVER_RIDING_STYLED_ITEM('overriding color',(#550775),#126995, + #549603); +#550775 = PRESENTATION_STYLE_ASSIGNMENT((#550776)); +#550776 = SURFACE_STYLE_USAGE(.BOTH.,#550777); +#550777 = SURFACE_SIDE_STYLE('',(#550778)); +#550778 = SURFACE_STYLE_FILL_AREA(#550779); +#550779 = FILL_AREA_STYLE('',(#550780)); +#550780 = FILL_AREA_STYLE_COLOUR('',#546242); +#550781 = OVER_RIDING_STYLED_ITEM('overriding color',(#550782),#127012, + #549603); +#550782 = PRESENTATION_STYLE_ASSIGNMENT((#550783)); +#550783 = SURFACE_STYLE_USAGE(.BOTH.,#550784); +#550784 = SURFACE_SIDE_STYLE('',(#550785)); +#550785 = SURFACE_STYLE_FILL_AREA(#550786); +#550786 = FILL_AREA_STYLE('',(#550787)); +#550787 = FILL_AREA_STYLE_COLOUR('',#546242); +#550788 = OVER_RIDING_STYLED_ITEM('overriding color',(#550789),#127029, + #549603); +#550789 = PRESENTATION_STYLE_ASSIGNMENT((#550790)); +#550790 = SURFACE_STYLE_USAGE(.BOTH.,#550791); +#550791 = SURFACE_SIDE_STYLE('',(#550792)); +#550792 = SURFACE_STYLE_FILL_AREA(#550793); +#550793 = FILL_AREA_STYLE('',(#550794)); +#550794 = FILL_AREA_STYLE_COLOUR('',#546242); +#550795 = OVER_RIDING_STYLED_ITEM('overriding color',(#550796),#127046, + #549603); +#550796 = PRESENTATION_STYLE_ASSIGNMENT((#550797)); +#550797 = SURFACE_STYLE_USAGE(.BOTH.,#550798); +#550798 = SURFACE_SIDE_STYLE('',(#550799)); +#550799 = SURFACE_STYLE_FILL_AREA(#550800); +#550800 = FILL_AREA_STYLE('',(#550801)); +#550801 = FILL_AREA_STYLE_COLOUR('',#546242); +#550802 = OVER_RIDING_STYLED_ITEM('overriding color',(#550803),#127058, + #549603); +#550803 = PRESENTATION_STYLE_ASSIGNMENT((#550804)); +#550804 = SURFACE_STYLE_USAGE(.BOTH.,#550805); +#550805 = SURFACE_SIDE_STYLE('',(#550806)); +#550806 = SURFACE_STYLE_FILL_AREA(#550807); +#550807 = FILL_AREA_STYLE('',(#550808)); +#550808 = FILL_AREA_STYLE_COLOUR('',#546242); +#550809 = OVER_RIDING_STYLED_ITEM('overriding color',(#550810),#127080, + #549603); +#550810 = PRESENTATION_STYLE_ASSIGNMENT((#550811)); +#550811 = SURFACE_STYLE_USAGE(.BOTH.,#550812); +#550812 = SURFACE_SIDE_STYLE('',(#550813)); +#550813 = SURFACE_STYLE_FILL_AREA(#550814); +#550814 = FILL_AREA_STYLE('',(#550815)); +#550815 = FILL_AREA_STYLE_COLOUR('',#546242); +#550816 = OVER_RIDING_STYLED_ITEM('overriding color',(#550817),#127097, + #549603); +#550817 = PRESENTATION_STYLE_ASSIGNMENT((#550818)); +#550818 = SURFACE_STYLE_USAGE(.BOTH.,#550819); +#550819 = SURFACE_SIDE_STYLE('',(#550820)); +#550820 = SURFACE_STYLE_FILL_AREA(#550821); +#550821 = FILL_AREA_STYLE('',(#550822)); +#550822 = FILL_AREA_STYLE_COLOUR('',#546242); +#550823 = OVER_RIDING_STYLED_ITEM('overriding color',(#550824),#127114, + #549603); +#550824 = PRESENTATION_STYLE_ASSIGNMENT((#550825)); +#550825 = SURFACE_STYLE_USAGE(.BOTH.,#550826); +#550826 = SURFACE_SIDE_STYLE('',(#550827)); +#550827 = SURFACE_STYLE_FILL_AREA(#550828); +#550828 = FILL_AREA_STYLE('',(#550829)); +#550829 = FILL_AREA_STYLE_COLOUR('',#546242); +#550830 = OVER_RIDING_STYLED_ITEM('overriding color',(#550831),#127131, + #549603); +#550831 = PRESENTATION_STYLE_ASSIGNMENT((#550832)); +#550832 = SURFACE_STYLE_USAGE(.BOTH.,#550833); +#550833 = SURFACE_SIDE_STYLE('',(#550834)); +#550834 = SURFACE_STYLE_FILL_AREA(#550835); +#550835 = FILL_AREA_STYLE('',(#550836)); +#550836 = FILL_AREA_STYLE_COLOUR('',#546242); +#550837 = OVER_RIDING_STYLED_ITEM('overriding color',(#550838),#127148, + #549603); +#550838 = PRESENTATION_STYLE_ASSIGNMENT((#550839)); +#550839 = SURFACE_STYLE_USAGE(.BOTH.,#550840); +#550840 = SURFACE_SIDE_STYLE('',(#550841)); +#550841 = SURFACE_STYLE_FILL_AREA(#550842); +#550842 = FILL_AREA_STYLE('',(#550843)); +#550843 = FILL_AREA_STYLE_COLOUR('',#546242); +#550844 = OVER_RIDING_STYLED_ITEM('overriding color',(#550845),#127165, + #549603); +#550845 = PRESENTATION_STYLE_ASSIGNMENT((#550846)); +#550846 = SURFACE_STYLE_USAGE(.BOTH.,#550847); +#550847 = SURFACE_SIDE_STYLE('',(#550848)); +#550848 = SURFACE_STYLE_FILL_AREA(#550849); +#550849 = FILL_AREA_STYLE('',(#550850)); +#550850 = FILL_AREA_STYLE_COLOUR('',#546242); +#550851 = OVER_RIDING_STYLED_ITEM('overriding color',(#550852),#127182, + #549603); +#550852 = PRESENTATION_STYLE_ASSIGNMENT((#550853)); +#550853 = SURFACE_STYLE_USAGE(.BOTH.,#550854); +#550854 = SURFACE_SIDE_STYLE('',(#550855)); +#550855 = SURFACE_STYLE_FILL_AREA(#550856); +#550856 = FILL_AREA_STYLE('',(#550857)); +#550857 = FILL_AREA_STYLE_COLOUR('',#546242); +#550858 = OVER_RIDING_STYLED_ITEM('overriding color',(#550859),#127199, + #549603); +#550859 = PRESENTATION_STYLE_ASSIGNMENT((#550860)); +#550860 = SURFACE_STYLE_USAGE(.BOTH.,#550861); +#550861 = SURFACE_SIDE_STYLE('',(#550862)); +#550862 = SURFACE_STYLE_FILL_AREA(#550863); +#550863 = FILL_AREA_STYLE('',(#550864)); +#550864 = FILL_AREA_STYLE_COLOUR('',#546242); +#550865 = OVER_RIDING_STYLED_ITEM('overriding color',(#550866),#127216, + #549603); +#550866 = PRESENTATION_STYLE_ASSIGNMENT((#550867)); +#550867 = SURFACE_STYLE_USAGE(.BOTH.,#550868); +#550868 = SURFACE_SIDE_STYLE('',(#550869)); +#550869 = SURFACE_STYLE_FILL_AREA(#550870); +#550870 = FILL_AREA_STYLE('',(#550871)); +#550871 = FILL_AREA_STYLE_COLOUR('',#546242); +#550872 = OVER_RIDING_STYLED_ITEM('overriding color',(#550873),#127233, + #549603); +#550873 = PRESENTATION_STYLE_ASSIGNMENT((#550874)); +#550874 = SURFACE_STYLE_USAGE(.BOTH.,#550875); +#550875 = SURFACE_SIDE_STYLE('',(#550876)); +#550876 = SURFACE_STYLE_FILL_AREA(#550877); +#550877 = FILL_AREA_STYLE('',(#550878)); +#550878 = FILL_AREA_STYLE_COLOUR('',#546242); +#550879 = OVER_RIDING_STYLED_ITEM('overriding color',(#550880),#127250, + #549603); +#550880 = PRESENTATION_STYLE_ASSIGNMENT((#550881)); +#550881 = SURFACE_STYLE_USAGE(.BOTH.,#550882); +#550882 = SURFACE_SIDE_STYLE('',(#550883)); +#550883 = SURFACE_STYLE_FILL_AREA(#550884); +#550884 = FILL_AREA_STYLE('',(#550885)); +#550885 = FILL_AREA_STYLE_COLOUR('',#546242); +#550886 = OVER_RIDING_STYLED_ITEM('overriding color',(#550887),#127267, + #549603); +#550887 = PRESENTATION_STYLE_ASSIGNMENT((#550888)); +#550888 = SURFACE_STYLE_USAGE(.BOTH.,#550889); +#550889 = SURFACE_SIDE_STYLE('',(#550890)); +#550890 = SURFACE_STYLE_FILL_AREA(#550891); +#550891 = FILL_AREA_STYLE('',(#550892)); +#550892 = FILL_AREA_STYLE_COLOUR('',#546242); +#550893 = OVER_RIDING_STYLED_ITEM('overriding color',(#550894),#127284, + #549603); +#550894 = PRESENTATION_STYLE_ASSIGNMENT((#550895)); +#550895 = SURFACE_STYLE_USAGE(.BOTH.,#550896); +#550896 = SURFACE_SIDE_STYLE('',(#550897)); +#550897 = SURFACE_STYLE_FILL_AREA(#550898); +#550898 = FILL_AREA_STYLE('',(#550899)); +#550899 = FILL_AREA_STYLE_COLOUR('',#546242); +#550900 = OVER_RIDING_STYLED_ITEM('overriding color',(#550901),#127301, + #549603); +#550901 = PRESENTATION_STYLE_ASSIGNMENT((#550902)); +#550902 = SURFACE_STYLE_USAGE(.BOTH.,#550903); +#550903 = SURFACE_SIDE_STYLE('',(#550904)); +#550904 = SURFACE_STYLE_FILL_AREA(#550905); +#550905 = FILL_AREA_STYLE('',(#550906)); +#550906 = FILL_AREA_STYLE_COLOUR('',#546242); +#550907 = OVER_RIDING_STYLED_ITEM('overriding color',(#550908),#127318, + #549603); +#550908 = PRESENTATION_STYLE_ASSIGNMENT((#550909)); +#550909 = SURFACE_STYLE_USAGE(.BOTH.,#550910); +#550910 = SURFACE_SIDE_STYLE('',(#550911)); +#550911 = SURFACE_STYLE_FILL_AREA(#550912); +#550912 = FILL_AREA_STYLE('',(#550913)); +#550913 = FILL_AREA_STYLE_COLOUR('',#546242); +#550914 = OVER_RIDING_STYLED_ITEM('overriding color',(#550915),#127335, + #549603); +#550915 = PRESENTATION_STYLE_ASSIGNMENT((#550916)); +#550916 = SURFACE_STYLE_USAGE(.BOTH.,#550917); +#550917 = SURFACE_SIDE_STYLE('',(#550918)); +#550918 = SURFACE_STYLE_FILL_AREA(#550919); +#550919 = FILL_AREA_STYLE('',(#550920)); +#550920 = FILL_AREA_STYLE_COLOUR('',#546242); +#550921 = OVER_RIDING_STYLED_ITEM('overriding color',(#550922),#127352, + #549603); +#550922 = PRESENTATION_STYLE_ASSIGNMENT((#550923)); +#550923 = SURFACE_STYLE_USAGE(.BOTH.,#550924); +#550924 = SURFACE_SIDE_STYLE('',(#550925)); +#550925 = SURFACE_STYLE_FILL_AREA(#550926); +#550926 = FILL_AREA_STYLE('',(#550927)); +#550927 = FILL_AREA_STYLE_COLOUR('',#546242); +#550928 = OVER_RIDING_STYLED_ITEM('overriding color',(#550929),#127369, + #549603); +#550929 = PRESENTATION_STYLE_ASSIGNMENT((#550930)); +#550930 = SURFACE_STYLE_USAGE(.BOTH.,#550931); +#550931 = SURFACE_SIDE_STYLE('',(#550932)); +#550932 = SURFACE_STYLE_FILL_AREA(#550933); +#550933 = FILL_AREA_STYLE('',(#550934)); +#550934 = FILL_AREA_STYLE_COLOUR('',#546242); +#550935 = OVER_RIDING_STYLED_ITEM('overriding color',(#550936),#127381, + #549603); +#550936 = PRESENTATION_STYLE_ASSIGNMENT((#550937)); +#550937 = SURFACE_STYLE_USAGE(.BOTH.,#550938); +#550938 = SURFACE_SIDE_STYLE('',(#550939)); +#550939 = SURFACE_STYLE_FILL_AREA(#550940); +#550940 = FILL_AREA_STYLE('',(#550941)); +#550941 = FILL_AREA_STYLE_COLOUR('',#546242); +#550942 = OVER_RIDING_STYLED_ITEM('overriding color',(#550943),#127403, + #549603); +#550943 = PRESENTATION_STYLE_ASSIGNMENT((#550944)); +#550944 = SURFACE_STYLE_USAGE(.BOTH.,#550945); +#550945 = SURFACE_SIDE_STYLE('',(#550946)); +#550946 = SURFACE_STYLE_FILL_AREA(#550947); +#550947 = FILL_AREA_STYLE('',(#550948)); +#550948 = FILL_AREA_STYLE_COLOUR('',#546242); +#550949 = OVER_RIDING_STYLED_ITEM('overriding color',(#550950),#127420, + #549603); +#550950 = PRESENTATION_STYLE_ASSIGNMENT((#550951)); +#550951 = SURFACE_STYLE_USAGE(.BOTH.,#550952); +#550952 = SURFACE_SIDE_STYLE('',(#550953)); +#550953 = SURFACE_STYLE_FILL_AREA(#550954); +#550954 = FILL_AREA_STYLE('',(#550955)); +#550955 = FILL_AREA_STYLE_COLOUR('',#546242); +#550956 = OVER_RIDING_STYLED_ITEM('overriding color',(#550957),#127437, + #549603); +#550957 = PRESENTATION_STYLE_ASSIGNMENT((#550958)); +#550958 = SURFACE_STYLE_USAGE(.BOTH.,#550959); +#550959 = SURFACE_SIDE_STYLE('',(#550960)); +#550960 = SURFACE_STYLE_FILL_AREA(#550961); +#550961 = FILL_AREA_STYLE('',(#550962)); +#550962 = FILL_AREA_STYLE_COLOUR('',#546242); +#550963 = OVER_RIDING_STYLED_ITEM('overriding color',(#550964),#127454, + #549603); +#550964 = PRESENTATION_STYLE_ASSIGNMENT((#550965)); +#550965 = SURFACE_STYLE_USAGE(.BOTH.,#550966); +#550966 = SURFACE_SIDE_STYLE('',(#550967)); +#550967 = SURFACE_STYLE_FILL_AREA(#550968); +#550968 = FILL_AREA_STYLE('',(#550969)); +#550969 = FILL_AREA_STYLE_COLOUR('',#546242); +#550970 = OVER_RIDING_STYLED_ITEM('overriding color',(#550971),#127471, + #549603); +#550971 = PRESENTATION_STYLE_ASSIGNMENT((#550972)); +#550972 = SURFACE_STYLE_USAGE(.BOTH.,#550973); +#550973 = SURFACE_SIDE_STYLE('',(#550974)); +#550974 = SURFACE_STYLE_FILL_AREA(#550975); +#550975 = FILL_AREA_STYLE('',(#550976)); +#550976 = FILL_AREA_STYLE_COLOUR('',#546242); +#550977 = OVER_RIDING_STYLED_ITEM('overriding color',(#550978),#127488, + #549603); +#550978 = PRESENTATION_STYLE_ASSIGNMENT((#550979)); +#550979 = SURFACE_STYLE_USAGE(.BOTH.,#550980); +#550980 = SURFACE_SIDE_STYLE('',(#550981)); +#550981 = SURFACE_STYLE_FILL_AREA(#550982); +#550982 = FILL_AREA_STYLE('',(#550983)); +#550983 = FILL_AREA_STYLE_COLOUR('',#546242); +#550984 = OVER_RIDING_STYLED_ITEM('overriding color',(#550985),#127505, + #549603); +#550985 = PRESENTATION_STYLE_ASSIGNMENT((#550986)); +#550986 = SURFACE_STYLE_USAGE(.BOTH.,#550987); +#550987 = SURFACE_SIDE_STYLE('',(#550988)); +#550988 = SURFACE_STYLE_FILL_AREA(#550989); +#550989 = FILL_AREA_STYLE('',(#550990)); +#550990 = FILL_AREA_STYLE_COLOUR('',#546242); +#550991 = OVER_RIDING_STYLED_ITEM('overriding color',(#550992),#127522, + #549603); +#550992 = PRESENTATION_STYLE_ASSIGNMENT((#550993)); +#550993 = SURFACE_STYLE_USAGE(.BOTH.,#550994); +#550994 = SURFACE_SIDE_STYLE('',(#550995)); +#550995 = SURFACE_STYLE_FILL_AREA(#550996); +#550996 = FILL_AREA_STYLE('',(#550997)); +#550997 = FILL_AREA_STYLE_COLOUR('',#546242); +#550998 = OVER_RIDING_STYLED_ITEM('overriding color',(#550999),#127539, + #549603); +#550999 = PRESENTATION_STYLE_ASSIGNMENT((#551000)); +#551000 = SURFACE_STYLE_USAGE(.BOTH.,#551001); +#551001 = SURFACE_SIDE_STYLE('',(#551002)); +#551002 = SURFACE_STYLE_FILL_AREA(#551003); +#551003 = FILL_AREA_STYLE('',(#551004)); +#551004 = FILL_AREA_STYLE_COLOUR('',#546242); +#551005 = OVER_RIDING_STYLED_ITEM('overriding color',(#551006),#127551, + #549603); +#551006 = PRESENTATION_STYLE_ASSIGNMENT((#551007)); +#551007 = SURFACE_STYLE_USAGE(.BOTH.,#551008); +#551008 = SURFACE_SIDE_STYLE('',(#551009)); +#551009 = SURFACE_STYLE_FILL_AREA(#551010); +#551010 = FILL_AREA_STYLE('',(#551011)); +#551011 = FILL_AREA_STYLE_COLOUR('',#546242); +#551012 = OVER_RIDING_STYLED_ITEM('overriding color',(#551013),#127573, + #549603); +#551013 = PRESENTATION_STYLE_ASSIGNMENT((#551014)); +#551014 = SURFACE_STYLE_USAGE(.BOTH.,#551015); +#551015 = SURFACE_SIDE_STYLE('',(#551016)); +#551016 = SURFACE_STYLE_FILL_AREA(#551017); +#551017 = FILL_AREA_STYLE('',(#551018)); +#551018 = FILL_AREA_STYLE_COLOUR('',#546242); +#551019 = OVER_RIDING_STYLED_ITEM('overriding color',(#551020),#127590, + #549603); +#551020 = PRESENTATION_STYLE_ASSIGNMENT((#551021)); +#551021 = SURFACE_STYLE_USAGE(.BOTH.,#551022); +#551022 = SURFACE_SIDE_STYLE('',(#551023)); +#551023 = SURFACE_STYLE_FILL_AREA(#551024); +#551024 = FILL_AREA_STYLE('',(#551025)); +#551025 = FILL_AREA_STYLE_COLOUR('',#546242); +#551026 = OVER_RIDING_STYLED_ITEM('overriding color',(#551027),#127607, + #549603); +#551027 = PRESENTATION_STYLE_ASSIGNMENT((#551028)); +#551028 = SURFACE_STYLE_USAGE(.BOTH.,#551029); +#551029 = SURFACE_SIDE_STYLE('',(#551030)); +#551030 = SURFACE_STYLE_FILL_AREA(#551031); +#551031 = FILL_AREA_STYLE('',(#551032)); +#551032 = FILL_AREA_STYLE_COLOUR('',#546242); +#551033 = OVER_RIDING_STYLED_ITEM('overriding color',(#551034),#127624, + #549603); +#551034 = PRESENTATION_STYLE_ASSIGNMENT((#551035)); +#551035 = SURFACE_STYLE_USAGE(.BOTH.,#551036); +#551036 = SURFACE_SIDE_STYLE('',(#551037)); +#551037 = SURFACE_STYLE_FILL_AREA(#551038); +#551038 = FILL_AREA_STYLE('',(#551039)); +#551039 = FILL_AREA_STYLE_COLOUR('',#546242); +#551040 = OVER_RIDING_STYLED_ITEM('overriding color',(#551041),#127641, + #549603); +#551041 = PRESENTATION_STYLE_ASSIGNMENT((#551042)); +#551042 = SURFACE_STYLE_USAGE(.BOTH.,#551043); +#551043 = SURFACE_SIDE_STYLE('',(#551044)); +#551044 = SURFACE_STYLE_FILL_AREA(#551045); +#551045 = FILL_AREA_STYLE('',(#551046)); +#551046 = FILL_AREA_STYLE_COLOUR('',#546242); +#551047 = OVER_RIDING_STYLED_ITEM('overriding color',(#551048),#127658, + #549603); +#551048 = PRESENTATION_STYLE_ASSIGNMENT((#551049)); +#551049 = SURFACE_STYLE_USAGE(.BOTH.,#551050); +#551050 = SURFACE_SIDE_STYLE('',(#551051)); +#551051 = SURFACE_STYLE_FILL_AREA(#551052); +#551052 = FILL_AREA_STYLE('',(#551053)); +#551053 = FILL_AREA_STYLE_COLOUR('',#546242); +#551054 = OVER_RIDING_STYLED_ITEM('overriding color',(#551055),#127675, + #549603); +#551055 = PRESENTATION_STYLE_ASSIGNMENT((#551056)); +#551056 = SURFACE_STYLE_USAGE(.BOTH.,#551057); +#551057 = SURFACE_SIDE_STYLE('',(#551058)); +#551058 = SURFACE_STYLE_FILL_AREA(#551059); +#551059 = FILL_AREA_STYLE('',(#551060)); +#551060 = FILL_AREA_STYLE_COLOUR('',#546242); +#551061 = OVER_RIDING_STYLED_ITEM('overriding color',(#551062),#127692, + #549603); +#551062 = PRESENTATION_STYLE_ASSIGNMENT((#551063)); +#551063 = SURFACE_STYLE_USAGE(.BOTH.,#551064); +#551064 = SURFACE_SIDE_STYLE('',(#551065)); +#551065 = SURFACE_STYLE_FILL_AREA(#551066); +#551066 = FILL_AREA_STYLE('',(#551067)); +#551067 = FILL_AREA_STYLE_COLOUR('',#546242); +#551068 = OVER_RIDING_STYLED_ITEM('overriding color',(#551069),#127709, + #549603); +#551069 = PRESENTATION_STYLE_ASSIGNMENT((#551070)); +#551070 = SURFACE_STYLE_USAGE(.BOTH.,#551071); +#551071 = SURFACE_SIDE_STYLE('',(#551072)); +#551072 = SURFACE_STYLE_FILL_AREA(#551073); +#551073 = FILL_AREA_STYLE('',(#551074)); +#551074 = FILL_AREA_STYLE_COLOUR('',#546242); +#551075 = OVER_RIDING_STYLED_ITEM('overriding color',(#551076),#127721, + #549603); +#551076 = PRESENTATION_STYLE_ASSIGNMENT((#551077)); +#551077 = SURFACE_STYLE_USAGE(.BOTH.,#551078); +#551078 = SURFACE_SIDE_STYLE('',(#551079)); +#551079 = SURFACE_STYLE_FILL_AREA(#551080); +#551080 = FILL_AREA_STYLE('',(#551081)); +#551081 = FILL_AREA_STYLE_COLOUR('',#510377); +#551082 = OVER_RIDING_STYLED_ITEM('overriding color',(#551083),#127753, + #549603); +#551083 = PRESENTATION_STYLE_ASSIGNMENT((#551084)); +#551084 = SURFACE_STYLE_USAGE(.BOTH.,#551085); +#551085 = SURFACE_SIDE_STYLE('',(#551086)); +#551086 = SURFACE_STYLE_FILL_AREA(#551087); +#551087 = FILL_AREA_STYLE('',(#551088)); +#551088 = FILL_AREA_STYLE_COLOUR('',#510377); +#551089 = OVER_RIDING_STYLED_ITEM('overriding color',(#551090),#127771, + #549603); +#551090 = PRESENTATION_STYLE_ASSIGNMENT((#551091)); +#551091 = SURFACE_STYLE_USAGE(.BOTH.,#551092); +#551092 = SURFACE_SIDE_STYLE('',(#551093)); +#551093 = SURFACE_STYLE_FILL_AREA(#551094); +#551094 = FILL_AREA_STYLE('',(#551095)); +#551095 = FILL_AREA_STYLE_COLOUR('',#549912); +#551096 = OVER_RIDING_STYLED_ITEM('overriding color',(#551097),#127801, + #549603); +#551097 = PRESENTATION_STYLE_ASSIGNMENT((#551098)); +#551098 = SURFACE_STYLE_USAGE(.BOTH.,#551099); +#551099 = SURFACE_SIDE_STYLE('',(#551100)); +#551100 = SURFACE_STYLE_FILL_AREA(#551101); +#551101 = FILL_AREA_STYLE('',(#551102)); +#551102 = FILL_AREA_STYLE_COLOUR('',#551103); +#551103 = COLOUR_RGB('',0.254901961802,0.254901961802,0.254901961802); +#551104 = OVER_RIDING_STYLED_ITEM('overriding color',(#551105),#127833, + #549603); +#551105 = PRESENTATION_STYLE_ASSIGNMENT((#551106)); +#551106 = SURFACE_STYLE_USAGE(.BOTH.,#551107); +#551107 = SURFACE_SIDE_STYLE('',(#551108)); +#551108 = SURFACE_STYLE_FILL_AREA(#551109); +#551109 = FILL_AREA_STYLE('',(#551110)); +#551110 = FILL_AREA_STYLE_COLOUR('',#551103); +#551111 = OVER_RIDING_STYLED_ITEM('overriding color',(#551112),#127851, + #549603); +#551112 = PRESENTATION_STYLE_ASSIGNMENT((#551113)); +#551113 = SURFACE_STYLE_USAGE(.BOTH.,#551114); +#551114 = SURFACE_SIDE_STYLE('',(#551115)); +#551115 = SURFACE_STYLE_FILL_AREA(#551116); +#551116 = FILL_AREA_STYLE('',(#551117)); +#551117 = FILL_AREA_STYLE_COLOUR('',#551103); +#551118 = OVER_RIDING_STYLED_ITEM('overriding color',(#551119),#127927, + #549603); +#551119 = PRESENTATION_STYLE_ASSIGNMENT((#551120)); +#551120 = SURFACE_STYLE_USAGE(.BOTH.,#551121); +#551121 = SURFACE_SIDE_STYLE('',(#551122)); +#551122 = SURFACE_STYLE_FILL_AREA(#551123); +#551123 = FILL_AREA_STYLE('',(#551124)); +#551124 = FILL_AREA_STYLE_COLOUR('',#551103); +#551125 = OVER_RIDING_STYLED_ITEM('overriding color',(#551126),#127958, + #549603); +#551126 = PRESENTATION_STYLE_ASSIGNMENT((#551127)); +#551127 = SURFACE_STYLE_USAGE(.BOTH.,#551128); +#551128 = SURFACE_SIDE_STYLE('',(#551129)); +#551129 = SURFACE_STYLE_FILL_AREA(#551130); +#551130 = FILL_AREA_STYLE('',(#551131)); +#551131 = FILL_AREA_STYLE_COLOUR('',#551103); +#551132 = OVER_RIDING_STYLED_ITEM('overriding color',(#551133),#128003, + #549603); +#551133 = PRESENTATION_STYLE_ASSIGNMENT((#551134)); +#551134 = SURFACE_STYLE_USAGE(.BOTH.,#551135); +#551135 = SURFACE_SIDE_STYLE('',(#551136)); +#551136 = SURFACE_STYLE_FILL_AREA(#551137); +#551137 = FILL_AREA_STYLE('',(#551138)); +#551138 = FILL_AREA_STYLE_COLOUR('',#551103); +#551139 = OVER_RIDING_STYLED_ITEM('overriding color',(#551140),#128035, + #549603); +#551140 = PRESENTATION_STYLE_ASSIGNMENT((#551141)); +#551141 = SURFACE_STYLE_USAGE(.BOTH.,#551142); +#551142 = SURFACE_SIDE_STYLE('',(#551143)); +#551143 = SURFACE_STYLE_FILL_AREA(#551144); +#551144 = FILL_AREA_STYLE('',(#551145)); +#551145 = FILL_AREA_STYLE_COLOUR('',#551103); +#551146 = OVER_RIDING_STYLED_ITEM('overriding color',(#551147),#128075, + #549603); +#551147 = PRESENTATION_STYLE_ASSIGNMENT((#551148)); +#551148 = SURFACE_STYLE_USAGE(.BOTH.,#551149); +#551149 = SURFACE_SIDE_STYLE('',(#551150)); +#551150 = SURFACE_STYLE_FILL_AREA(#551151); +#551151 = FILL_AREA_STYLE('',(#551152)); +#551152 = FILL_AREA_STYLE_COLOUR('',#551103); +#551153 = OVER_RIDING_STYLED_ITEM('overriding color',(#551154),#128099, + #549603); +#551154 = PRESENTATION_STYLE_ASSIGNMENT((#551155)); +#551155 = SURFACE_STYLE_USAGE(.BOTH.,#551156); +#551156 = SURFACE_SIDE_STYLE('',(#551157)); +#551157 = SURFACE_STYLE_FILL_AREA(#551158); +#551158 = FILL_AREA_STYLE('',(#551159)); +#551159 = FILL_AREA_STYLE_COLOUR('',#551103); +#551160 = OVER_RIDING_STYLED_ITEM('overriding color',(#551161),#128130, + #549603); +#551161 = PRESENTATION_STYLE_ASSIGNMENT((#551162)); +#551162 = SURFACE_STYLE_USAGE(.BOTH.,#551163); +#551163 = SURFACE_SIDE_STYLE('',(#551164)); +#551164 = SURFACE_STYLE_FILL_AREA(#551165); +#551165 = FILL_AREA_STYLE('',(#551166)); +#551166 = FILL_AREA_STYLE_COLOUR('',#551103); +#551167 = OVER_RIDING_STYLED_ITEM('overriding color',(#551168),#128153, + #549603); +#551168 = PRESENTATION_STYLE_ASSIGNMENT((#551169)); +#551169 = SURFACE_STYLE_USAGE(.BOTH.,#551170); +#551170 = SURFACE_SIDE_STYLE('',(#551171)); +#551171 = SURFACE_STYLE_FILL_AREA(#551172); +#551172 = FILL_AREA_STYLE('',(#551173)); +#551173 = FILL_AREA_STYLE_COLOUR('',#551103); +#551174 = OVER_RIDING_STYLED_ITEM('overriding color',(#551175),#128170, + #549603); +#551175 = PRESENTATION_STYLE_ASSIGNMENT((#551176)); +#551176 = SURFACE_STYLE_USAGE(.BOTH.,#551177); +#551177 = SURFACE_SIDE_STYLE('',(#551178)); +#551178 = SURFACE_STYLE_FILL_AREA(#551179); +#551179 = FILL_AREA_STYLE('',(#551180)); +#551180 = FILL_AREA_STYLE_COLOUR('',#551103); +#551181 = OVER_RIDING_STYLED_ITEM('overriding color',(#551182),#128188, + #549603); +#551182 = PRESENTATION_STYLE_ASSIGNMENT((#551183)); +#551183 = SURFACE_STYLE_USAGE(.BOTH.,#551184); +#551184 = SURFACE_SIDE_STYLE('',(#551185)); +#551185 = SURFACE_STYLE_FILL_AREA(#551186); +#551186 = FILL_AREA_STYLE('',(#551187)); +#551187 = FILL_AREA_STYLE_COLOUR('',#551103); +#551188 = OVER_RIDING_STYLED_ITEM('overriding color',(#551189),#128214, + #549603); +#551189 = PRESENTATION_STYLE_ASSIGNMENT((#551190)); +#551190 = SURFACE_STYLE_USAGE(.BOTH.,#551191); +#551191 = SURFACE_SIDE_STYLE('',(#551192)); +#551192 = SURFACE_STYLE_FILL_AREA(#551193); +#551193 = FILL_AREA_STYLE('',(#551194)); +#551194 = FILL_AREA_STYLE_COLOUR('',#551103); +#551195 = OVER_RIDING_STYLED_ITEM('overriding color',(#551196),#128231, + #549603); +#551196 = PRESENTATION_STYLE_ASSIGNMENT((#551197)); +#551197 = SURFACE_STYLE_USAGE(.BOTH.,#551198); +#551198 = SURFACE_SIDE_STYLE('',(#551199)); +#551199 = SURFACE_STYLE_FILL_AREA(#551200); +#551200 = FILL_AREA_STYLE('',(#551201)); +#551201 = FILL_AREA_STYLE_COLOUR('',#551103); +#551202 = OVER_RIDING_STYLED_ITEM('overriding color',(#551203),#128243, + #549603); +#551203 = PRESENTATION_STYLE_ASSIGNMENT((#551204)); +#551204 = SURFACE_STYLE_USAGE(.BOTH.,#551205); +#551205 = SURFACE_SIDE_STYLE('',(#551206)); +#551206 = SURFACE_STYLE_FILL_AREA(#551207); +#551207 = FILL_AREA_STYLE('',(#551208)); +#551208 = FILL_AREA_STYLE_COLOUR('',#551103); +#551209 = OVER_RIDING_STYLED_ITEM('overriding color',(#551210),#128267, + #549603); +#551210 = PRESENTATION_STYLE_ASSIGNMENT((#551211)); +#551211 = SURFACE_STYLE_USAGE(.BOTH.,#551212); +#551212 = SURFACE_SIDE_STYLE('',(#551213)); +#551213 = SURFACE_STYLE_FILL_AREA(#551214); +#551214 = FILL_AREA_STYLE('',(#551215)); +#551215 = FILL_AREA_STYLE_COLOUR('',#551103); +#551216 = OVER_RIDING_STYLED_ITEM('overriding color',(#551217),#128285, + #549603); +#551217 = PRESENTATION_STYLE_ASSIGNMENT((#551218)); +#551218 = SURFACE_STYLE_USAGE(.BOTH.,#551219); +#551219 = SURFACE_SIDE_STYLE('',(#551220)); +#551220 = SURFACE_STYLE_FILL_AREA(#551221); +#551221 = FILL_AREA_STYLE('',(#551222)); +#551222 = FILL_AREA_STYLE_COLOUR('',#551103); +#551223 = OVER_RIDING_STYLED_ITEM('overriding color',(#551224),#128297, + #549603); +#551224 = PRESENTATION_STYLE_ASSIGNMENT((#551225)); +#551225 = SURFACE_STYLE_USAGE(.BOTH.,#551226); +#551226 = SURFACE_SIDE_STYLE('',(#551227)); +#551227 = SURFACE_STYLE_FILL_AREA(#551228); +#551228 = FILL_AREA_STYLE('',(#551229)); +#551229 = FILL_AREA_STYLE_COLOUR('',#510377); +#551230 = OVER_RIDING_STYLED_ITEM('overriding color',(#551231),#128363, + #549603); +#551231 = PRESENTATION_STYLE_ASSIGNMENT((#551232)); +#551232 = SURFACE_STYLE_USAGE(.BOTH.,#551233); +#551233 = SURFACE_SIDE_STYLE('',(#551234)); +#551234 = SURFACE_STYLE_FILL_AREA(#551235); +#551235 = FILL_AREA_STYLE('',(#551236)); +#551236 = FILL_AREA_STYLE_COLOUR('',#510377); +#551237 = OVER_RIDING_STYLED_ITEM('overriding color',(#551238),#128387, + #549603); +#551238 = PRESENTATION_STYLE_ASSIGNMENT((#551239)); +#551239 = SURFACE_STYLE_USAGE(.BOTH.,#551240); +#551240 = SURFACE_SIDE_STYLE('',(#551241)); +#551241 = SURFACE_STYLE_FILL_AREA(#551242); +#551242 = FILL_AREA_STYLE('',(#551243)); +#551243 = FILL_AREA_STYLE_COLOUR('',#510377); +#551244 = OVER_RIDING_STYLED_ITEM('overriding color',(#551245),#128411, + #549603); +#551245 = PRESENTATION_STYLE_ASSIGNMENT((#551246)); +#551246 = SURFACE_STYLE_USAGE(.BOTH.,#551247); +#551247 = SURFACE_SIDE_STYLE('',(#551248)); +#551248 = SURFACE_STYLE_FILL_AREA(#551249); +#551249 = FILL_AREA_STYLE('',(#551250)); +#551250 = FILL_AREA_STYLE_COLOUR('',#510377); +#551251 = OVER_RIDING_STYLED_ITEM('overriding color',(#551252),#128442, + #549603); +#551252 = PRESENTATION_STYLE_ASSIGNMENT((#551253)); +#551253 = SURFACE_STYLE_USAGE(.BOTH.,#551254); +#551254 = SURFACE_SIDE_STYLE('',(#551255)); +#551255 = SURFACE_STYLE_FILL_AREA(#551256); +#551256 = FILL_AREA_STYLE('',(#551257)); +#551257 = FILL_AREA_STYLE_COLOUR('',#510377); +#551258 = OVER_RIDING_STYLED_ITEM('overriding color',(#551259),#128459, + #549603); +#551259 = PRESENTATION_STYLE_ASSIGNMENT((#551260)); +#551260 = SURFACE_STYLE_USAGE(.BOTH.,#551261); +#551261 = SURFACE_SIDE_STYLE('',(#551262)); +#551262 = SURFACE_STYLE_FILL_AREA(#551263); +#551263 = FILL_AREA_STYLE('',(#551264)); +#551264 = FILL_AREA_STYLE_COLOUR('',#549799); +#551265 = OVER_RIDING_STYLED_ITEM('overriding color',(#551266),#128471, + #549603); +#551266 = PRESENTATION_STYLE_ASSIGNMENT((#551267)); +#551267 = SURFACE_STYLE_USAGE(.BOTH.,#551268); +#551268 = SURFACE_SIDE_STYLE('',(#551269)); +#551269 = SURFACE_STYLE_FILL_AREA(#551270); +#551270 = FILL_AREA_STYLE('',(#551271)); +#551271 = FILL_AREA_STYLE_COLOUR('',#510377); +#551272 = OVER_RIDING_STYLED_ITEM('overriding color',(#551273),#128488, + #549603); +#551273 = PRESENTATION_STYLE_ASSIGNMENT((#551274)); +#551274 = SURFACE_STYLE_USAGE(.BOTH.,#551275); +#551275 = SURFACE_SIDE_STYLE('',(#551276)); +#551276 = SURFACE_STYLE_FILL_AREA(#551277); +#551277 = FILL_AREA_STYLE('',(#551278)); +#551278 = FILL_AREA_STYLE_COLOUR('',#549799); +#551279 = OVER_RIDING_STYLED_ITEM('overriding color',(#551280),#128505, + #549603); +#551280 = PRESENTATION_STYLE_ASSIGNMENT((#551281)); +#551281 = SURFACE_STYLE_USAGE(.BOTH.,#551282); +#551282 = SURFACE_SIDE_STYLE('',(#551283)); +#551283 = SURFACE_STYLE_FILL_AREA(#551284); +#551284 = FILL_AREA_STYLE('',(#551285)); +#551285 = FILL_AREA_STYLE_COLOUR('',#510377); +#551286 = OVER_RIDING_STYLED_ITEM('overriding color',(#551287),#128517, + #549603); +#551287 = PRESENTATION_STYLE_ASSIGNMENT((#551288)); +#551288 = SURFACE_STYLE_USAGE(.BOTH.,#551289); +#551289 = SURFACE_SIDE_STYLE('',(#551290)); +#551290 = SURFACE_STYLE_FILL_AREA(#551291); +#551291 = FILL_AREA_STYLE('',(#551292)); +#551292 = FILL_AREA_STYLE_COLOUR('',#510377); +#551293 = OVER_RIDING_STYLED_ITEM('overriding color',(#551294),#128534, + #549603); +#551294 = PRESENTATION_STYLE_ASSIGNMENT((#551295)); +#551295 = SURFACE_STYLE_USAGE(.BOTH.,#551296); +#551296 = SURFACE_SIDE_STYLE('',(#551297)); +#551297 = SURFACE_STYLE_FILL_AREA(#551298); +#551298 = FILL_AREA_STYLE('',(#551299)); +#551299 = FILL_AREA_STYLE_COLOUR('',#510377); +#551300 = STYLED_ITEM('color',(#551301),#128546); +#551301 = PRESENTATION_STYLE_ASSIGNMENT((#551302)); +#551302 = SURFACE_STYLE_USAGE(.BOTH.,#551303); +#551303 = SURFACE_SIDE_STYLE('',(#551304)); +#551304 = SURFACE_STYLE_FILL_AREA(#551305); +#551305 = FILL_AREA_STYLE('',(#551306)); +#551306 = FILL_AREA_STYLE_COLOUR('',#521053); +#551307 = OVER_RIDING_STYLED_ITEM('overriding color',(#551308),#128548, + #551300); +#551308 = PRESENTATION_STYLE_ASSIGNMENT((#551309)); +#551309 = SURFACE_STYLE_USAGE(.BOTH.,#551310); +#551310 = SURFACE_SIDE_STYLE('',(#551311)); +#551311 = SURFACE_STYLE_FILL_AREA(#551312); +#551312 = FILL_AREA_STYLE('',(#551313)); +#551313 = FILL_AREA_STYLE_COLOUR('',#510377); +#551314 = OVER_RIDING_STYLED_ITEM('overriding color',(#551315),#128676, + #551300); +#551315 = PRESENTATION_STYLE_ASSIGNMENT((#551316)); +#551316 = SURFACE_STYLE_USAGE(.BOTH.,#551317); +#551317 = SURFACE_SIDE_STYLE('',(#551318)); +#551318 = SURFACE_STYLE_FILL_AREA(#551319); +#551319 = FILL_AREA_STYLE('',(#551320)); +#551320 = FILL_AREA_STYLE_COLOUR('',#510377); +#551321 = OVER_RIDING_STYLED_ITEM('overriding color',(#551322),#128707, + #551300); +#551322 = PRESENTATION_STYLE_ASSIGNMENT((#551323)); +#551323 = SURFACE_STYLE_USAGE(.BOTH.,#551324); +#551324 = SURFACE_SIDE_STYLE('',(#551325)); +#551325 = SURFACE_STYLE_FILL_AREA(#551326); +#551326 = FILL_AREA_STYLE('',(#551327)); +#551327 = FILL_AREA_STYLE_COLOUR('',#510377); +#551328 = OVER_RIDING_STYLED_ITEM('overriding color',(#551329),#128802, + #551300); +#551329 = PRESENTATION_STYLE_ASSIGNMENT((#551330)); +#551330 = SURFACE_STYLE_USAGE(.BOTH.,#551331); +#551331 = SURFACE_SIDE_STYLE('',(#551332)); +#551332 = SURFACE_STYLE_FILL_AREA(#551333); +#551333 = FILL_AREA_STYLE('',(#551334)); +#551334 = FILL_AREA_STYLE_COLOUR('',#510377); +#551335 = OVER_RIDING_STYLED_ITEM('overriding color',(#551336),#128833, + #551300); +#551336 = PRESENTATION_STYLE_ASSIGNMENT((#551337)); +#551337 = SURFACE_STYLE_USAGE(.BOTH.,#551338); +#551338 = SURFACE_SIDE_STYLE('',(#551339)); +#551339 = SURFACE_STYLE_FILL_AREA(#551340); +#551340 = FILL_AREA_STYLE('',(#551341)); +#551341 = FILL_AREA_STYLE_COLOUR('',#510377); +#551342 = OVER_RIDING_STYLED_ITEM('overriding color',(#551343),#128966, + #551300); +#551343 = PRESENTATION_STYLE_ASSIGNMENT((#551344)); +#551344 = SURFACE_STYLE_USAGE(.BOTH.,#551345); +#551345 = SURFACE_SIDE_STYLE('',(#551346)); +#551346 = SURFACE_STYLE_FILL_AREA(#551347); +#551347 = FILL_AREA_STYLE('',(#551348)); +#551348 = FILL_AREA_STYLE_COLOUR('',#546242); +#551349 = OVER_RIDING_STYLED_ITEM('overriding color',(#551350),#128998, + #551300); +#551350 = PRESENTATION_STYLE_ASSIGNMENT((#551351)); +#551351 = SURFACE_STYLE_USAGE(.BOTH.,#551352); +#551352 = SURFACE_SIDE_STYLE('',(#551353)); +#551353 = SURFACE_STYLE_FILL_AREA(#551354); +#551354 = FILL_AREA_STYLE('',(#551355)); +#551355 = FILL_AREA_STYLE_COLOUR('',#546242); +#551356 = OVER_RIDING_STYLED_ITEM('overriding color',(#551357),#129030, + #551300); +#551357 = PRESENTATION_STYLE_ASSIGNMENT((#551358)); +#551358 = SURFACE_STYLE_USAGE(.BOTH.,#551359); +#551359 = SURFACE_SIDE_STYLE('',(#551360)); +#551360 = SURFACE_STYLE_FILL_AREA(#551361); +#551361 = FILL_AREA_STYLE('',(#551362)); +#551362 = FILL_AREA_STYLE_COLOUR('',#546242); +#551363 = OVER_RIDING_STYLED_ITEM('overriding color',(#551364),#129047, + #551300); +#551364 = PRESENTATION_STYLE_ASSIGNMENT((#551365)); +#551365 = SURFACE_STYLE_USAGE(.BOTH.,#551366); +#551366 = SURFACE_SIDE_STYLE('',(#551367)); +#551367 = SURFACE_STYLE_FILL_AREA(#551368); +#551368 = FILL_AREA_STYLE('',(#551369)); +#551369 = FILL_AREA_STYLE_COLOUR('',#546242); +#551370 = OVER_RIDING_STYLED_ITEM('overriding color',(#551371),#129064, + #551300); +#551371 = PRESENTATION_STYLE_ASSIGNMENT((#551372)); +#551372 = SURFACE_STYLE_USAGE(.BOTH.,#551373); +#551373 = SURFACE_SIDE_STYLE('',(#551374)); +#551374 = SURFACE_STYLE_FILL_AREA(#551375); +#551375 = FILL_AREA_STYLE('',(#551376)); +#551376 = FILL_AREA_STYLE_COLOUR('',#546242); +#551377 = OVER_RIDING_STYLED_ITEM('overriding color',(#551378),#129076, + #551300); +#551378 = PRESENTATION_STYLE_ASSIGNMENT((#551379)); +#551379 = SURFACE_STYLE_USAGE(.BOTH.,#551380); +#551380 = SURFACE_SIDE_STYLE('',(#551381)); +#551381 = SURFACE_STYLE_FILL_AREA(#551382); +#551382 = FILL_AREA_STYLE('',(#551383)); +#551383 = FILL_AREA_STYLE_COLOUR('',#546242); +#551384 = OVER_RIDING_STYLED_ITEM('overriding color',(#551385),#129108, + #551300); +#551385 = PRESENTATION_STYLE_ASSIGNMENT((#551386)); +#551386 = SURFACE_STYLE_USAGE(.BOTH.,#551387); +#551387 = SURFACE_SIDE_STYLE('',(#551388)); +#551388 = SURFACE_STYLE_FILL_AREA(#551389); +#551389 = FILL_AREA_STYLE('',(#551390)); +#551390 = FILL_AREA_STYLE_COLOUR('',#546242); +#551391 = OVER_RIDING_STYLED_ITEM('overriding color',(#551392),#129140, + #551300); +#551392 = PRESENTATION_STYLE_ASSIGNMENT((#551393)); +#551393 = SURFACE_STYLE_USAGE(.BOTH.,#551394); +#551394 = SURFACE_SIDE_STYLE('',(#551395)); +#551395 = SURFACE_STYLE_FILL_AREA(#551396); +#551396 = FILL_AREA_STYLE('',(#551397)); +#551397 = FILL_AREA_STYLE_COLOUR('',#546242); +#551398 = OVER_RIDING_STYLED_ITEM('overriding color',(#551399),#129157, + #551300); +#551399 = PRESENTATION_STYLE_ASSIGNMENT((#551400)); +#551400 = SURFACE_STYLE_USAGE(.BOTH.,#551401); +#551401 = SURFACE_SIDE_STYLE('',(#551402)); +#551402 = SURFACE_STYLE_FILL_AREA(#551403); +#551403 = FILL_AREA_STYLE('',(#551404)); +#551404 = FILL_AREA_STYLE_COLOUR('',#546242); +#551405 = OVER_RIDING_STYLED_ITEM('overriding color',(#551406),#129174, + #551300); +#551406 = PRESENTATION_STYLE_ASSIGNMENT((#551407)); +#551407 = SURFACE_STYLE_USAGE(.BOTH.,#551408); +#551408 = SURFACE_SIDE_STYLE('',(#551409)); +#551409 = SURFACE_STYLE_FILL_AREA(#551410); +#551410 = FILL_AREA_STYLE('',(#551411)); +#551411 = FILL_AREA_STYLE_COLOUR('',#546242); +#551412 = OVER_RIDING_STYLED_ITEM('overriding color',(#551413),#129186, + #551300); +#551413 = PRESENTATION_STYLE_ASSIGNMENT((#551414)); +#551414 = SURFACE_STYLE_USAGE(.BOTH.,#551415); +#551415 = SURFACE_SIDE_STYLE('',(#551416)); +#551416 = SURFACE_STYLE_FILL_AREA(#551417); +#551417 = FILL_AREA_STYLE('',(#551418)); +#551418 = FILL_AREA_STYLE_COLOUR('',#546242); +#551419 = OVER_RIDING_STYLED_ITEM('overriding color',(#551420),#129217, + #551300); +#551420 = PRESENTATION_STYLE_ASSIGNMENT((#551421)); +#551421 = SURFACE_STYLE_USAGE(.BOTH.,#551422); +#551422 = SURFACE_SIDE_STYLE('',(#551423)); +#551423 = SURFACE_STYLE_FILL_AREA(#551424); +#551424 = FILL_AREA_STYLE('',(#551425)); +#551425 = FILL_AREA_STYLE_COLOUR('',#546242); +#551426 = OVER_RIDING_STYLED_ITEM('overriding color',(#551427),#129250, + #551300); +#551427 = PRESENTATION_STYLE_ASSIGNMENT((#551428)); +#551428 = SURFACE_STYLE_USAGE(.BOTH.,#551429); +#551429 = SURFACE_SIDE_STYLE('',(#551430)); +#551430 = SURFACE_STYLE_FILL_AREA(#551431); +#551431 = FILL_AREA_STYLE('',(#551432)); +#551432 = FILL_AREA_STYLE_COLOUR('',#546242); +#551433 = OVER_RIDING_STYLED_ITEM('overriding color',(#551434),#129267, + #551300); +#551434 = PRESENTATION_STYLE_ASSIGNMENT((#551435)); +#551435 = SURFACE_STYLE_USAGE(.BOTH.,#551436); +#551436 = SURFACE_SIDE_STYLE('',(#551437)); +#551437 = SURFACE_STYLE_FILL_AREA(#551438); +#551438 = FILL_AREA_STYLE('',(#551439)); +#551439 = FILL_AREA_STYLE_COLOUR('',#546242); +#551440 = OVER_RIDING_STYLED_ITEM('overriding color',(#551441),#129284, + #551300); +#551441 = PRESENTATION_STYLE_ASSIGNMENT((#551442)); +#551442 = SURFACE_STYLE_USAGE(.BOTH.,#551443); +#551443 = SURFACE_SIDE_STYLE('',(#551444)); +#551444 = SURFACE_STYLE_FILL_AREA(#551445); +#551445 = FILL_AREA_STYLE('',(#551446)); +#551446 = FILL_AREA_STYLE_COLOUR('',#546242); +#551447 = OVER_RIDING_STYLED_ITEM('overriding color',(#551448),#129296, + #551300); +#551448 = PRESENTATION_STYLE_ASSIGNMENT((#551449)); +#551449 = SURFACE_STYLE_USAGE(.BOTH.,#551450); +#551450 = SURFACE_SIDE_STYLE('',(#551451)); +#551451 = SURFACE_STYLE_FILL_AREA(#551452); +#551452 = FILL_AREA_STYLE('',(#551453)); +#551453 = FILL_AREA_STYLE_COLOUR('',#510377); +#551454 = OVER_RIDING_STYLED_ITEM('overriding color',(#551455),#129328, + #551300); +#551455 = PRESENTATION_STYLE_ASSIGNMENT((#551456)); +#551456 = SURFACE_STYLE_USAGE(.BOTH.,#551457); +#551457 = SURFACE_SIDE_STYLE('',(#551458)); +#551458 = SURFACE_STYLE_FILL_AREA(#551459); +#551459 = FILL_AREA_STYLE('',(#551460)); +#551460 = FILL_AREA_STYLE_COLOUR('',#510377); +#551461 = OVER_RIDING_STYLED_ITEM('overriding color',(#551462),#129360, + #551300); +#551462 = PRESENTATION_STYLE_ASSIGNMENT((#551463)); +#551463 = SURFACE_STYLE_USAGE(.BOTH.,#551464); +#551464 = SURFACE_SIDE_STYLE('',(#551465)); +#551465 = SURFACE_STYLE_FILL_AREA(#551466); +#551466 = FILL_AREA_STYLE('',(#551467)); +#551467 = FILL_AREA_STYLE_COLOUR('',#510377); +#551468 = OVER_RIDING_STYLED_ITEM('overriding color',(#551469),#129378, + #551300); +#551469 = PRESENTATION_STYLE_ASSIGNMENT((#551470)); +#551470 = SURFACE_STYLE_USAGE(.BOTH.,#551471); +#551471 = SURFACE_SIDE_STYLE('',(#551472)); +#551472 = SURFACE_STYLE_FILL_AREA(#551473); +#551473 = FILL_AREA_STYLE('',(#551474)); +#551474 = FILL_AREA_STYLE_COLOUR('',#510377); +#551475 = OVER_RIDING_STYLED_ITEM('overriding color',(#551476),#129388, + #551300); +#551476 = PRESENTATION_STYLE_ASSIGNMENT((#551477)); +#551477 = SURFACE_STYLE_USAGE(.BOTH.,#551478); +#551478 = SURFACE_SIDE_STYLE('',(#551479)); +#551479 = SURFACE_STYLE_FILL_AREA(#551480); +#551480 = FILL_AREA_STYLE('',(#551481)); +#551481 = FILL_AREA_STYLE_COLOUR('',#510377); +#551482 = OVER_RIDING_STYLED_ITEM('overriding color',(#551483),#129412, + #551300); +#551483 = PRESENTATION_STYLE_ASSIGNMENT((#551484)); +#551484 = SURFACE_STYLE_USAGE(.BOTH.,#551485); +#551485 = SURFACE_SIDE_STYLE('',(#551486)); +#551486 = SURFACE_STYLE_FILL_AREA(#551487); +#551487 = FILL_AREA_STYLE('',(#551488)); +#551488 = FILL_AREA_STYLE_COLOUR('',#510377); +#551489 = OVER_RIDING_STYLED_ITEM('overriding color',(#551490),#129436, + #551300); +#551490 = PRESENTATION_STYLE_ASSIGNMENT((#551491)); +#551491 = SURFACE_STYLE_USAGE(.BOTH.,#551492); +#551492 = SURFACE_SIDE_STYLE('',(#551493)); +#551493 = SURFACE_STYLE_FILL_AREA(#551494); +#551494 = FILL_AREA_STYLE('',(#551495)); +#551495 = FILL_AREA_STYLE_COLOUR('',#549799); +#551496 = OVER_RIDING_STYLED_ITEM('overriding color',(#551497),#129588, + #551300); +#551497 = PRESENTATION_STYLE_ASSIGNMENT((#551498)); +#551498 = SURFACE_STYLE_USAGE(.BOTH.,#551499); +#551499 = SURFACE_SIDE_STYLE('',(#551500)); +#551500 = SURFACE_STYLE_FILL_AREA(#551501); +#551501 = FILL_AREA_STYLE('',(#551502)); +#551502 = FILL_AREA_STYLE_COLOUR('',#510377); +#551503 = OVER_RIDING_STYLED_ITEM('overriding color',(#551504),#129619, + #551300); +#551504 = PRESENTATION_STYLE_ASSIGNMENT((#551505)); +#551505 = SURFACE_STYLE_USAGE(.BOTH.,#551506); +#551506 = SURFACE_SIDE_STYLE('',(#551507)); +#551507 = SURFACE_STYLE_FILL_AREA(#551508); +#551508 = FILL_AREA_STYLE('',(#551509)); +#551509 = FILL_AREA_STYLE_COLOUR('',#510377); +#551510 = OVER_RIDING_STYLED_ITEM('overriding color',(#551511),#129650, + #551300); +#551511 = PRESENTATION_STYLE_ASSIGNMENT((#551512)); +#551512 = SURFACE_STYLE_USAGE(.BOTH.,#551513); +#551513 = SURFACE_SIDE_STYLE('',(#551514)); +#551514 = SURFACE_STYLE_FILL_AREA(#551515); +#551515 = FILL_AREA_STYLE('',(#551516)); +#551516 = FILL_AREA_STYLE_COLOUR('',#510377); +#551517 = OVER_RIDING_STYLED_ITEM('overriding color',(#551518),#129667, + #551300); +#551518 = PRESENTATION_STYLE_ASSIGNMENT((#551519)); +#551519 = SURFACE_STYLE_USAGE(.BOTH.,#551520); +#551520 = SURFACE_SIDE_STYLE('',(#551521)); +#551521 = SURFACE_STYLE_FILL_AREA(#551522); +#551522 = FILL_AREA_STYLE('',(#551523)); +#551523 = FILL_AREA_STYLE_COLOUR('',#510377); +#551524 = OVER_RIDING_STYLED_ITEM('overriding color',(#551525),#129684, + #551300); +#551525 = PRESENTATION_STYLE_ASSIGNMENT((#551526)); +#551526 = SURFACE_STYLE_USAGE(.BOTH.,#551527); +#551527 = SURFACE_SIDE_STYLE('',(#551528)); +#551528 = SURFACE_STYLE_FILL_AREA(#551529); +#551529 = FILL_AREA_STYLE('',(#551530)); +#551530 = FILL_AREA_STYLE_COLOUR('',#510377); +#551531 = OVER_RIDING_STYLED_ITEM('overriding color',(#551532),#129696, + #551300); +#551532 = PRESENTATION_STYLE_ASSIGNMENT((#551533)); +#551533 = SURFACE_STYLE_USAGE(.BOTH.,#551534); +#551534 = SURFACE_SIDE_STYLE('',(#551535)); +#551535 = SURFACE_STYLE_FILL_AREA(#551536); +#551536 = FILL_AREA_STYLE('',(#551537)); +#551537 = FILL_AREA_STYLE_COLOUR('',#510377); +#551538 = OVER_RIDING_STYLED_ITEM('overriding color',(#551539),#129713, + #551300); +#551539 = PRESENTATION_STYLE_ASSIGNMENT((#551540)); +#551540 = SURFACE_STYLE_USAGE(.BOTH.,#551541); +#551541 = SURFACE_SIDE_STYLE('',(#551542)); +#551542 = SURFACE_STYLE_FILL_AREA(#551543); +#551543 = FILL_AREA_STYLE('',(#551544)); +#551544 = FILL_AREA_STYLE_COLOUR('',#510377); +#551545 = OVER_RIDING_STYLED_ITEM('overriding color',(#551546),#129730, + #551300); +#551546 = PRESENTATION_STYLE_ASSIGNMENT((#551547)); +#551547 = SURFACE_STYLE_USAGE(.BOTH.,#551548); +#551548 = SURFACE_SIDE_STYLE('',(#551549)); +#551549 = SURFACE_STYLE_FILL_AREA(#551550); +#551550 = FILL_AREA_STYLE('',(#551551)); +#551551 = FILL_AREA_STYLE_COLOUR('',#510377); +#551552 = OVER_RIDING_STYLED_ITEM('overriding color',(#551553),#129742, + #551300); +#551553 = PRESENTATION_STYLE_ASSIGNMENT((#551554)); +#551554 = SURFACE_STYLE_USAGE(.BOTH.,#551555); +#551555 = SURFACE_SIDE_STYLE('',(#551556)); +#551556 = SURFACE_STYLE_FILL_AREA(#551557); +#551557 = FILL_AREA_STYLE('',(#551558)); +#551558 = FILL_AREA_STYLE_COLOUR('',#510377); +#551559 = OVER_RIDING_STYLED_ITEM('overriding color',(#551560),#129767, + #551300); +#551560 = PRESENTATION_STYLE_ASSIGNMENT((#551561)); +#551561 = SURFACE_STYLE_USAGE(.BOTH.,#551562); +#551562 = SURFACE_SIDE_STYLE('',(#551563)); +#551563 = SURFACE_STYLE_FILL_AREA(#551564); +#551564 = FILL_AREA_STYLE('',(#551565)); +#551565 = FILL_AREA_STYLE_COLOUR('',#510377); +#551566 = OVER_RIDING_STYLED_ITEM('overriding color',(#551567),#129971, + #551300); +#551567 = PRESENTATION_STYLE_ASSIGNMENT((#551568)); +#551568 = SURFACE_STYLE_USAGE(.BOTH.,#551569); +#551569 = SURFACE_SIDE_STYLE('',(#551570)); +#551570 = SURFACE_STYLE_FILL_AREA(#551571); +#551571 = FILL_AREA_STYLE('',(#551572)); +#551572 = FILL_AREA_STYLE_COLOUR('',#510377); +#551573 = OVER_RIDING_STYLED_ITEM('overriding color',(#551574),#130002, + #551300); +#551574 = PRESENTATION_STYLE_ASSIGNMENT((#551575)); +#551575 = SURFACE_STYLE_USAGE(.BOTH.,#551576); +#551576 = SURFACE_SIDE_STYLE('',(#551577)); +#551577 = SURFACE_STYLE_FILL_AREA(#551578); +#551578 = FILL_AREA_STYLE('',(#551579)); +#551579 = FILL_AREA_STYLE_COLOUR('',#510377); +#551580 = OVER_RIDING_STYLED_ITEM('overriding color',(#551581),#130026, + #551300); +#551581 = PRESENTATION_STYLE_ASSIGNMENT((#551582)); +#551582 = SURFACE_STYLE_USAGE(.BOTH.,#551583); +#551583 = SURFACE_SIDE_STYLE('',(#551584)); +#551584 = SURFACE_STYLE_FILL_AREA(#551585); +#551585 = FILL_AREA_STYLE('',(#551586)); +#551586 = FILL_AREA_STYLE_COLOUR('',#510377); +#551587 = OVER_RIDING_STYLED_ITEM('overriding color',(#551588),#130050, + #551300); +#551588 = PRESENTATION_STYLE_ASSIGNMENT((#551589)); +#551589 = SURFACE_STYLE_USAGE(.BOTH.,#551590); +#551590 = SURFACE_SIDE_STYLE('',(#551591)); +#551591 = SURFACE_STYLE_FILL_AREA(#551592); +#551592 = FILL_AREA_STYLE('',(#551593)); +#551593 = FILL_AREA_STYLE_COLOUR('',#510377); +#551594 = OVER_RIDING_STYLED_ITEM('overriding color',(#551595),#130075, + #551300); +#551595 = PRESENTATION_STYLE_ASSIGNMENT((#551596)); +#551596 = SURFACE_STYLE_USAGE(.BOTH.,#551597); +#551597 = SURFACE_SIDE_STYLE('',(#551598)); +#551598 = SURFACE_STYLE_FILL_AREA(#551599); +#551599 = FILL_AREA_STYLE('',(#551600)); +#551600 = FILL_AREA_STYLE_COLOUR('',#510377); +#551601 = OVER_RIDING_STYLED_ITEM('overriding color',(#551602),#130092, + #551300); +#551602 = PRESENTATION_STYLE_ASSIGNMENT((#551603)); +#551603 = SURFACE_STYLE_USAGE(.BOTH.,#551604); +#551604 = SURFACE_SIDE_STYLE('',(#551605)); +#551605 = SURFACE_STYLE_FILL_AREA(#551606); +#551606 = FILL_AREA_STYLE('',(#551607)); +#551607 = FILL_AREA_STYLE_COLOUR('',#549912); +#551608 = OVER_RIDING_STYLED_ITEM('overriding color',(#551609),#130259, + #551300); +#551609 = PRESENTATION_STYLE_ASSIGNMENT((#551610)); +#551610 = SURFACE_STYLE_USAGE(.BOTH.,#551611); +#551611 = SURFACE_SIDE_STYLE('',(#551612)); +#551612 = SURFACE_STYLE_FILL_AREA(#551613); +#551613 = FILL_AREA_STYLE('',(#551614)); +#551614 = FILL_AREA_STYLE_COLOUR('',#549912); +#551615 = OVER_RIDING_STYLED_ITEM('overriding color',(#551616),#130299, + #551300); +#551616 = PRESENTATION_STYLE_ASSIGNMENT((#551617)); +#551617 = SURFACE_STYLE_USAGE(.BOTH.,#551618); +#551618 = SURFACE_SIDE_STYLE('',(#551619)); +#551619 = SURFACE_STYLE_FILL_AREA(#551620); +#551620 = FILL_AREA_STYLE('',(#551621)); +#551621 = FILL_AREA_STYLE_COLOUR('',#549912); +#551622 = OVER_RIDING_STYLED_ITEM('overriding color',(#551623),#130339, + #551300); +#551623 = PRESENTATION_STYLE_ASSIGNMENT((#551624)); +#551624 = SURFACE_STYLE_USAGE(.BOTH.,#551625); +#551625 = SURFACE_SIDE_STYLE('',(#551626)); +#551626 = SURFACE_STYLE_FILL_AREA(#551627); +#551627 = FILL_AREA_STYLE('',(#551628)); +#551628 = FILL_AREA_STYLE_COLOUR('',#549912); +#551629 = OVER_RIDING_STYLED_ITEM('overriding color',(#551630),#130920, + #551300); +#551630 = PRESENTATION_STYLE_ASSIGNMENT((#551631)); +#551631 = SURFACE_STYLE_USAGE(.BOTH.,#551632); +#551632 = SURFACE_SIDE_STYLE('',(#551633)); +#551633 = SURFACE_STYLE_FILL_AREA(#551634); +#551634 = FILL_AREA_STYLE('',(#551635)); +#551635 = FILL_AREA_STYLE_COLOUR('',#549912); +#551636 = OVER_RIDING_STYLED_ITEM('overriding color',(#551637),#131088, + #551300); +#551637 = PRESENTATION_STYLE_ASSIGNMENT((#551638)); +#551638 = SURFACE_STYLE_USAGE(.BOTH.,#551639); +#551639 = SURFACE_SIDE_STYLE('',(#551640)); +#551640 = SURFACE_STYLE_FILL_AREA(#551641); +#551641 = FILL_AREA_STYLE('',(#551642)); +#551642 = FILL_AREA_STYLE_COLOUR('',#549912); +#551643 = OVER_RIDING_STYLED_ITEM('overriding color',(#551644),#131240, + #551300); +#551644 = PRESENTATION_STYLE_ASSIGNMENT((#551645)); +#551645 = SURFACE_STYLE_USAGE(.BOTH.,#551646); +#551646 = SURFACE_SIDE_STYLE('',(#551647)); +#551647 = SURFACE_STYLE_FILL_AREA(#551648); +#551648 = FILL_AREA_STYLE('',(#551649)); +#551649 = FILL_AREA_STYLE_COLOUR('',#549912); +#551650 = OVER_RIDING_STYLED_ITEM('overriding color',(#551651),#131328, + #551300); +#551651 = PRESENTATION_STYLE_ASSIGNMENT((#551652)); +#551652 = SURFACE_STYLE_USAGE(.BOTH.,#551653); +#551653 = SURFACE_SIDE_STYLE('',(#551654)); +#551654 = SURFACE_STYLE_FILL_AREA(#551655); +#551655 = FILL_AREA_STYLE('',(#551656)); +#551656 = FILL_AREA_STYLE_COLOUR('',#549912); +#551657 = OVER_RIDING_STYLED_ITEM('overriding color',(#551658),#131416, + #551300); +#551658 = PRESENTATION_STYLE_ASSIGNMENT((#551659)); +#551659 = SURFACE_STYLE_USAGE(.BOTH.,#551660); +#551660 = SURFACE_SIDE_STYLE('',(#551661)); +#551661 = SURFACE_STYLE_FILL_AREA(#551662); +#551662 = FILL_AREA_STYLE('',(#551663)); +#551663 = FILL_AREA_STYLE_COLOUR('',#510377); +#551664 = OVER_RIDING_STYLED_ITEM('overriding color',(#551665),#131438, + #551300); +#551665 = PRESENTATION_STYLE_ASSIGNMENT((#551666)); +#551666 = SURFACE_STYLE_USAGE(.BOTH.,#551667); +#551667 = SURFACE_SIDE_STYLE('',(#551668)); +#551668 = SURFACE_STYLE_FILL_AREA(#551669); +#551669 = FILL_AREA_STYLE('',(#551670)); +#551670 = FILL_AREA_STYLE_COLOUR('',#510377); +#551671 = OVER_RIDING_STYLED_ITEM('overriding color',(#551672),#131450, + #551300); +#551672 = PRESENTATION_STYLE_ASSIGNMENT((#551673)); +#551673 = SURFACE_STYLE_USAGE(.BOTH.,#551674); +#551674 = SURFACE_SIDE_STYLE('',(#551675)); +#551675 = SURFACE_STYLE_FILL_AREA(#551676); +#551676 = FILL_AREA_STYLE('',(#551677)); +#551677 = FILL_AREA_STYLE_COLOUR('',#510377); +#551678 = OVER_RIDING_STYLED_ITEM('overriding color',(#551679),#131467, + #551300); +#551679 = PRESENTATION_STYLE_ASSIGNMENT((#551680)); +#551680 = SURFACE_STYLE_USAGE(.BOTH.,#551681); +#551681 = SURFACE_SIDE_STYLE('',(#551682)); +#551682 = SURFACE_STYLE_FILL_AREA(#551683); +#551683 = FILL_AREA_STYLE('',(#551684)); +#551684 = FILL_AREA_STYLE_COLOUR('',#510377); +#551685 = OVER_RIDING_STYLED_ITEM('overriding color',(#551686),#131479, + #551300); +#551686 = PRESENTATION_STYLE_ASSIGNMENT((#551687)); +#551687 = SURFACE_STYLE_USAGE(.BOTH.,#551688); +#551688 = SURFACE_SIDE_STYLE('',(#551689)); +#551689 = SURFACE_STYLE_FILL_AREA(#551690); +#551690 = FILL_AREA_STYLE('',(#551691)); +#551691 = FILL_AREA_STYLE_COLOUR('',#510377); +#551692 = OVER_RIDING_STYLED_ITEM('overriding color',(#551693),#131496, + #551300); +#551693 = PRESENTATION_STYLE_ASSIGNMENT((#551694)); +#551694 = SURFACE_STYLE_USAGE(.BOTH.,#551695); +#551695 = SURFACE_SIDE_STYLE('',(#551696)); +#551696 = SURFACE_STYLE_FILL_AREA(#551697); +#551697 = FILL_AREA_STYLE('',(#551698)); +#551698 = FILL_AREA_STYLE_COLOUR('',#510377); +#551699 = OVER_RIDING_STYLED_ITEM('overriding color',(#551700),#131513, + #551300); +#551700 = PRESENTATION_STYLE_ASSIGNMENT((#551701)); +#551701 = SURFACE_STYLE_USAGE(.BOTH.,#551702); +#551702 = SURFACE_SIDE_STYLE('',(#551703)); +#551703 = SURFACE_STYLE_FILL_AREA(#551704); +#551704 = FILL_AREA_STYLE('',(#551705)); +#551705 = FILL_AREA_STYLE_COLOUR('',#510377); +#551706 = OVER_RIDING_STYLED_ITEM('overriding color',(#551707),#131530, + #551300); +#551707 = PRESENTATION_STYLE_ASSIGNMENT((#551708)); +#551708 = SURFACE_STYLE_USAGE(.BOTH.,#551709); +#551709 = SURFACE_SIDE_STYLE('',(#551710)); +#551710 = SURFACE_STYLE_FILL_AREA(#551711); +#551711 = FILL_AREA_STYLE('',(#551712)); +#551712 = FILL_AREA_STYLE_COLOUR('',#510377); +#551713 = OVER_RIDING_STYLED_ITEM('overriding color',(#551714),#131542, + #551300); +#551714 = PRESENTATION_STYLE_ASSIGNMENT((#551715)); +#551715 = SURFACE_STYLE_USAGE(.BOTH.,#551716); +#551716 = SURFACE_SIDE_STYLE('',(#551717)); +#551717 = SURFACE_STYLE_FILL_AREA(#551718); +#551718 = FILL_AREA_STYLE('',(#551719)); +#551719 = FILL_AREA_STYLE_COLOUR('',#510377); +#551720 = OVER_RIDING_STYLED_ITEM('overriding color',(#551721),#131564, + #551300); +#551721 = PRESENTATION_STYLE_ASSIGNMENT((#551722)); +#551722 = SURFACE_STYLE_USAGE(.BOTH.,#551723); +#551723 = SURFACE_SIDE_STYLE('',(#551724)); +#551724 = SURFACE_STYLE_FILL_AREA(#551725); +#551725 = FILL_AREA_STYLE('',(#551726)); +#551726 = FILL_AREA_STYLE_COLOUR('',#510377); +#551727 = OVER_RIDING_STYLED_ITEM('overriding color',(#551728),#131581, + #551300); +#551728 = PRESENTATION_STYLE_ASSIGNMENT((#551729)); +#551729 = SURFACE_STYLE_USAGE(.BOTH.,#551730); +#551730 = SURFACE_SIDE_STYLE('',(#551731)); +#551731 = SURFACE_STYLE_FILL_AREA(#551732); +#551732 = FILL_AREA_STYLE('',(#551733)); +#551733 = FILL_AREA_STYLE_COLOUR('',#510377); +#551734 = OVER_RIDING_STYLED_ITEM('overriding color',(#551735),#131598, + #551300); +#551735 = PRESENTATION_STYLE_ASSIGNMENT((#551736)); +#551736 = SURFACE_STYLE_USAGE(.BOTH.,#551737); +#551737 = SURFACE_SIDE_STYLE('',(#551738)); +#551738 = SURFACE_STYLE_FILL_AREA(#551739); +#551739 = FILL_AREA_STYLE('',(#551740)); +#551740 = FILL_AREA_STYLE_COLOUR('',#510377); +#551741 = OVER_RIDING_STYLED_ITEM('overriding color',(#551742),#131615, + #551300); +#551742 = PRESENTATION_STYLE_ASSIGNMENT((#551743)); +#551743 = SURFACE_STYLE_USAGE(.BOTH.,#551744); +#551744 = SURFACE_SIDE_STYLE('',(#551745)); +#551745 = SURFACE_STYLE_FILL_AREA(#551746); +#551746 = FILL_AREA_STYLE('',(#551747)); +#551747 = FILL_AREA_STYLE_COLOUR('',#510377); +#551748 = OVER_RIDING_STYLED_ITEM('overriding color',(#551749),#131627, + #551300); +#551749 = PRESENTATION_STYLE_ASSIGNMENT((#551750)); +#551750 = SURFACE_STYLE_USAGE(.BOTH.,#551751); +#551751 = SURFACE_SIDE_STYLE('',(#551752)); +#551752 = SURFACE_STYLE_FILL_AREA(#551753); +#551753 = FILL_AREA_STYLE('',(#551754)); +#551754 = FILL_AREA_STYLE_COLOUR('',#546242); +#551755 = OVER_RIDING_STYLED_ITEM('overriding color',(#551756),#131658, + #551300); +#551756 = PRESENTATION_STYLE_ASSIGNMENT((#551757)); +#551757 = SURFACE_STYLE_USAGE(.BOTH.,#551758); +#551758 = SURFACE_SIDE_STYLE('',(#551759)); +#551759 = SURFACE_STYLE_FILL_AREA(#551760); +#551760 = FILL_AREA_STYLE('',(#551761)); +#551761 = FILL_AREA_STYLE_COLOUR('',#546242); +#551762 = OVER_RIDING_STYLED_ITEM('overriding color',(#551763),#131682, + #551300); +#551763 = PRESENTATION_STYLE_ASSIGNMENT((#551764)); +#551764 = SURFACE_STYLE_USAGE(.BOTH.,#551765); +#551765 = SURFACE_SIDE_STYLE('',(#551766)); +#551766 = SURFACE_STYLE_FILL_AREA(#551767); +#551767 = FILL_AREA_STYLE('',(#551768)); +#551768 = FILL_AREA_STYLE_COLOUR('',#546242); +#551769 = OVER_RIDING_STYLED_ITEM('overriding color',(#551770),#131706, + #551300); +#551770 = PRESENTATION_STYLE_ASSIGNMENT((#551771)); +#551771 = SURFACE_STYLE_USAGE(.BOTH.,#551772); +#551772 = SURFACE_SIDE_STYLE('',(#551773)); +#551773 = SURFACE_STYLE_FILL_AREA(#551774); +#551774 = FILL_AREA_STYLE('',(#551775)); +#551775 = FILL_AREA_STYLE_COLOUR('',#546242); +#551776 = OVER_RIDING_STYLED_ITEM('overriding color',(#551777),#131730, + #551300); +#551777 = PRESENTATION_STYLE_ASSIGNMENT((#551778)); +#551778 = SURFACE_STYLE_USAGE(.BOTH.,#551779); +#551779 = SURFACE_SIDE_STYLE('',(#551780)); +#551780 = SURFACE_STYLE_FILL_AREA(#551781); +#551781 = FILL_AREA_STYLE('',(#551782)); +#551782 = FILL_AREA_STYLE_COLOUR('',#546242); +#551783 = OVER_RIDING_STYLED_ITEM('overriding color',(#551784),#131754, + #551300); +#551784 = PRESENTATION_STYLE_ASSIGNMENT((#551785)); +#551785 = SURFACE_STYLE_USAGE(.BOTH.,#551786); +#551786 = SURFACE_SIDE_STYLE('',(#551787)); +#551787 = SURFACE_STYLE_FILL_AREA(#551788); +#551788 = FILL_AREA_STYLE('',(#551789)); +#551789 = FILL_AREA_STYLE_COLOUR('',#546242); +#551790 = OVER_RIDING_STYLED_ITEM('overriding color',(#551791),#131778, + #551300); +#551791 = PRESENTATION_STYLE_ASSIGNMENT((#551792)); +#551792 = SURFACE_STYLE_USAGE(.BOTH.,#551793); +#551793 = SURFACE_SIDE_STYLE('',(#551794)); +#551794 = SURFACE_STYLE_FILL_AREA(#551795); +#551795 = FILL_AREA_STYLE('',(#551796)); +#551796 = FILL_AREA_STYLE_COLOUR('',#546242); +#551797 = OVER_RIDING_STYLED_ITEM('overriding color',(#551798),#131802, + #551300); +#551798 = PRESENTATION_STYLE_ASSIGNMENT((#551799)); +#551799 = SURFACE_STYLE_USAGE(.BOTH.,#551800); +#551800 = SURFACE_SIDE_STYLE('',(#551801)); +#551801 = SURFACE_STYLE_FILL_AREA(#551802); +#551802 = FILL_AREA_STYLE('',(#551803)); +#551803 = FILL_AREA_STYLE_COLOUR('',#546242); +#551804 = OVER_RIDING_STYLED_ITEM('overriding color',(#551805),#131826, + #551300); +#551805 = PRESENTATION_STYLE_ASSIGNMENT((#551806)); +#551806 = SURFACE_STYLE_USAGE(.BOTH.,#551807); +#551807 = SURFACE_SIDE_STYLE('',(#551808)); +#551808 = SURFACE_STYLE_FILL_AREA(#551809); +#551809 = FILL_AREA_STYLE('',(#551810)); +#551810 = FILL_AREA_STYLE_COLOUR('',#546242); +#551811 = OVER_RIDING_STYLED_ITEM('overriding color',(#551812),#131850, + #551300); +#551812 = PRESENTATION_STYLE_ASSIGNMENT((#551813)); +#551813 = SURFACE_STYLE_USAGE(.BOTH.,#551814); +#551814 = SURFACE_SIDE_STYLE('',(#551815)); +#551815 = SURFACE_STYLE_FILL_AREA(#551816); +#551816 = FILL_AREA_STYLE('',(#551817)); +#551817 = FILL_AREA_STYLE_COLOUR('',#546242); +#551818 = OVER_RIDING_STYLED_ITEM('overriding color',(#551819),#131874, + #551300); +#551819 = PRESENTATION_STYLE_ASSIGNMENT((#551820)); +#551820 = SURFACE_STYLE_USAGE(.BOTH.,#551821); +#551821 = SURFACE_SIDE_STYLE('',(#551822)); +#551822 = SURFACE_STYLE_FILL_AREA(#551823); +#551823 = FILL_AREA_STYLE('',(#551824)); +#551824 = FILL_AREA_STYLE_COLOUR('',#546242); +#551825 = OVER_RIDING_STYLED_ITEM('overriding color',(#551826),#131898, + #551300); +#551826 = PRESENTATION_STYLE_ASSIGNMENT((#551827)); +#551827 = SURFACE_STYLE_USAGE(.BOTH.,#551828); +#551828 = SURFACE_SIDE_STYLE('',(#551829)); +#551829 = SURFACE_STYLE_FILL_AREA(#551830); +#551830 = FILL_AREA_STYLE('',(#551831)); +#551831 = FILL_AREA_STYLE_COLOUR('',#546242); +#551832 = OVER_RIDING_STYLED_ITEM('overriding color',(#551833),#131922, + #551300); +#551833 = PRESENTATION_STYLE_ASSIGNMENT((#551834)); +#551834 = SURFACE_STYLE_USAGE(.BOTH.,#551835); +#551835 = SURFACE_SIDE_STYLE('',(#551836)); +#551836 = SURFACE_STYLE_FILL_AREA(#551837); +#551837 = FILL_AREA_STYLE('',(#551838)); +#551838 = FILL_AREA_STYLE_COLOUR('',#546242); +#551839 = OVER_RIDING_STYLED_ITEM('overriding color',(#551840),#131946, + #551300); +#551840 = PRESENTATION_STYLE_ASSIGNMENT((#551841)); +#551841 = SURFACE_STYLE_USAGE(.BOTH.,#551842); +#551842 = SURFACE_SIDE_STYLE('',(#551843)); +#551843 = SURFACE_STYLE_FILL_AREA(#551844); +#551844 = FILL_AREA_STYLE('',(#551845)); +#551845 = FILL_AREA_STYLE_COLOUR('',#546242); +#551846 = OVER_RIDING_STYLED_ITEM('overriding color',(#551847),#131970, + #551300); +#551847 = PRESENTATION_STYLE_ASSIGNMENT((#551848)); +#551848 = SURFACE_STYLE_USAGE(.BOTH.,#551849); +#551849 = SURFACE_SIDE_STYLE('',(#551850)); +#551850 = SURFACE_STYLE_FILL_AREA(#551851); +#551851 = FILL_AREA_STYLE('',(#551852)); +#551852 = FILL_AREA_STYLE_COLOUR('',#546242); +#551853 = OVER_RIDING_STYLED_ITEM('overriding color',(#551854),#131994, + #551300); +#551854 = PRESENTATION_STYLE_ASSIGNMENT((#551855)); +#551855 = SURFACE_STYLE_USAGE(.BOTH.,#551856); +#551856 = SURFACE_SIDE_STYLE('',(#551857)); +#551857 = SURFACE_STYLE_FILL_AREA(#551858); +#551858 = FILL_AREA_STYLE('',(#551859)); +#551859 = FILL_AREA_STYLE_COLOUR('',#546242); +#551860 = OVER_RIDING_STYLED_ITEM('overriding color',(#551861),#132018, + #551300); +#551861 = PRESENTATION_STYLE_ASSIGNMENT((#551862)); +#551862 = SURFACE_STYLE_USAGE(.BOTH.,#551863); +#551863 = SURFACE_SIDE_STYLE('',(#551864)); +#551864 = SURFACE_STYLE_FILL_AREA(#551865); +#551865 = FILL_AREA_STYLE('',(#551866)); +#551866 = FILL_AREA_STYLE_COLOUR('',#546242); +#551867 = OVER_RIDING_STYLED_ITEM('overriding color',(#551868),#132042, + #551300); +#551868 = PRESENTATION_STYLE_ASSIGNMENT((#551869)); +#551869 = SURFACE_STYLE_USAGE(.BOTH.,#551870); +#551870 = SURFACE_SIDE_STYLE('',(#551871)); +#551871 = SURFACE_STYLE_FILL_AREA(#551872); +#551872 = FILL_AREA_STYLE('',(#551873)); +#551873 = FILL_AREA_STYLE_COLOUR('',#546242); +#551874 = OVER_RIDING_STYLED_ITEM('overriding color',(#551875),#132066, + #551300); +#551875 = PRESENTATION_STYLE_ASSIGNMENT((#551876)); +#551876 = SURFACE_STYLE_USAGE(.BOTH.,#551877); +#551877 = SURFACE_SIDE_STYLE('',(#551878)); +#551878 = SURFACE_STYLE_FILL_AREA(#551879); +#551879 = FILL_AREA_STYLE('',(#551880)); +#551880 = FILL_AREA_STYLE_COLOUR('',#546242); +#551881 = OVER_RIDING_STYLED_ITEM('overriding color',(#551882),#132090, + #551300); +#551882 = PRESENTATION_STYLE_ASSIGNMENT((#551883)); +#551883 = SURFACE_STYLE_USAGE(.BOTH.,#551884); +#551884 = SURFACE_SIDE_STYLE('',(#551885)); +#551885 = SURFACE_STYLE_FILL_AREA(#551886); +#551886 = FILL_AREA_STYLE('',(#551887)); +#551887 = FILL_AREA_STYLE_COLOUR('',#546242); +#551888 = OVER_RIDING_STYLED_ITEM('overriding color',(#551889),#132114, + #551300); +#551889 = PRESENTATION_STYLE_ASSIGNMENT((#551890)); +#551890 = SURFACE_STYLE_USAGE(.BOTH.,#551891); +#551891 = SURFACE_SIDE_STYLE('',(#551892)); +#551892 = SURFACE_STYLE_FILL_AREA(#551893); +#551893 = FILL_AREA_STYLE('',(#551894)); +#551894 = FILL_AREA_STYLE_COLOUR('',#546242); +#551895 = OVER_RIDING_STYLED_ITEM('overriding color',(#551896),#132138, + #551300); +#551896 = PRESENTATION_STYLE_ASSIGNMENT((#551897)); +#551897 = SURFACE_STYLE_USAGE(.BOTH.,#551898); +#551898 = SURFACE_SIDE_STYLE('',(#551899)); +#551899 = SURFACE_STYLE_FILL_AREA(#551900); +#551900 = FILL_AREA_STYLE('',(#551901)); +#551901 = FILL_AREA_STYLE_COLOUR('',#546242); +#551902 = OVER_RIDING_STYLED_ITEM('overriding color',(#551903),#132162, + #551300); +#551903 = PRESENTATION_STYLE_ASSIGNMENT((#551904)); +#551904 = SURFACE_STYLE_USAGE(.BOTH.,#551905); +#551905 = SURFACE_SIDE_STYLE('',(#551906)); +#551906 = SURFACE_STYLE_FILL_AREA(#551907); +#551907 = FILL_AREA_STYLE('',(#551908)); +#551908 = FILL_AREA_STYLE_COLOUR('',#546242); +#551909 = OVER_RIDING_STYLED_ITEM('overriding color',(#551910),#132186, + #551300); +#551910 = PRESENTATION_STYLE_ASSIGNMENT((#551911)); +#551911 = SURFACE_STYLE_USAGE(.BOTH.,#551912); +#551912 = SURFACE_SIDE_STYLE('',(#551913)); +#551913 = SURFACE_STYLE_FILL_AREA(#551914); +#551914 = FILL_AREA_STYLE('',(#551915)); +#551915 = FILL_AREA_STYLE_COLOUR('',#546242); +#551916 = OVER_RIDING_STYLED_ITEM('overriding color',(#551917),#132210, + #551300); +#551917 = PRESENTATION_STYLE_ASSIGNMENT((#551918)); +#551918 = SURFACE_STYLE_USAGE(.BOTH.,#551919); +#551919 = SURFACE_SIDE_STYLE('',(#551920)); +#551920 = SURFACE_STYLE_FILL_AREA(#551921); +#551921 = FILL_AREA_STYLE('',(#551922)); +#551922 = FILL_AREA_STYLE_COLOUR('',#546242); +#551923 = OVER_RIDING_STYLED_ITEM('overriding color',(#551924),#132234, + #551300); +#551924 = PRESENTATION_STYLE_ASSIGNMENT((#551925)); +#551925 = SURFACE_STYLE_USAGE(.BOTH.,#551926); +#551926 = SURFACE_SIDE_STYLE('',(#551927)); +#551927 = SURFACE_STYLE_FILL_AREA(#551928); +#551928 = FILL_AREA_STYLE('',(#551929)); +#551929 = FILL_AREA_STYLE_COLOUR('',#546242); +#551930 = OVER_RIDING_STYLED_ITEM('overriding color',(#551931),#132258, + #551300); +#551931 = PRESENTATION_STYLE_ASSIGNMENT((#551932)); +#551932 = SURFACE_STYLE_USAGE(.BOTH.,#551933); +#551933 = SURFACE_SIDE_STYLE('',(#551934)); +#551934 = SURFACE_STYLE_FILL_AREA(#551935); +#551935 = FILL_AREA_STYLE('',(#551936)); +#551936 = FILL_AREA_STYLE_COLOUR('',#546242); +#551937 = OVER_RIDING_STYLED_ITEM('overriding color',(#551938),#132282, + #551300); +#551938 = PRESENTATION_STYLE_ASSIGNMENT((#551939)); +#551939 = SURFACE_STYLE_USAGE(.BOTH.,#551940); +#551940 = SURFACE_SIDE_STYLE('',(#551941)); +#551941 = SURFACE_STYLE_FILL_AREA(#551942); +#551942 = FILL_AREA_STYLE('',(#551943)); +#551943 = FILL_AREA_STYLE_COLOUR('',#546242); +#551944 = OVER_RIDING_STYLED_ITEM('overriding color',(#551945),#132306, + #551300); +#551945 = PRESENTATION_STYLE_ASSIGNMENT((#551946)); +#551946 = SURFACE_STYLE_USAGE(.BOTH.,#551947); +#551947 = SURFACE_SIDE_STYLE('',(#551948)); +#551948 = SURFACE_STYLE_FILL_AREA(#551949); +#551949 = FILL_AREA_STYLE('',(#551950)); +#551950 = FILL_AREA_STYLE_COLOUR('',#546242); +#551951 = OVER_RIDING_STYLED_ITEM('overriding color',(#551952),#132330, + #551300); +#551952 = PRESENTATION_STYLE_ASSIGNMENT((#551953)); +#551953 = SURFACE_STYLE_USAGE(.BOTH.,#551954); +#551954 = SURFACE_SIDE_STYLE('',(#551955)); +#551955 = SURFACE_STYLE_FILL_AREA(#551956); +#551956 = FILL_AREA_STYLE('',(#551957)); +#551957 = FILL_AREA_STYLE_COLOUR('',#546242); +#551958 = OVER_RIDING_STYLED_ITEM('overriding color',(#551959),#132354, + #551300); +#551959 = PRESENTATION_STYLE_ASSIGNMENT((#551960)); +#551960 = SURFACE_STYLE_USAGE(.BOTH.,#551961); +#551961 = SURFACE_SIDE_STYLE('',(#551962)); +#551962 = SURFACE_STYLE_FILL_AREA(#551963); +#551963 = FILL_AREA_STYLE('',(#551964)); +#551964 = FILL_AREA_STYLE_COLOUR('',#546242); +#551965 = OVER_RIDING_STYLED_ITEM('overriding color',(#551966),#132378, + #551300); +#551966 = PRESENTATION_STYLE_ASSIGNMENT((#551967)); +#551967 = SURFACE_STYLE_USAGE(.BOTH.,#551968); +#551968 = SURFACE_SIDE_STYLE('',(#551969)); +#551969 = SURFACE_STYLE_FILL_AREA(#551970); +#551970 = FILL_AREA_STYLE('',(#551971)); +#551971 = FILL_AREA_STYLE_COLOUR('',#546242); +#551972 = OVER_RIDING_STYLED_ITEM('overriding color',(#551973),#132402, + #551300); +#551973 = PRESENTATION_STYLE_ASSIGNMENT((#551974)); +#551974 = SURFACE_STYLE_USAGE(.BOTH.,#551975); +#551975 = SURFACE_SIDE_STYLE('',(#551976)); +#551976 = SURFACE_STYLE_FILL_AREA(#551977); +#551977 = FILL_AREA_STYLE('',(#551978)); +#551978 = FILL_AREA_STYLE_COLOUR('',#546242); +#551979 = OVER_RIDING_STYLED_ITEM('overriding color',(#551980),#132426, + #551300); +#551980 = PRESENTATION_STYLE_ASSIGNMENT((#551981)); +#551981 = SURFACE_STYLE_USAGE(.BOTH.,#551982); +#551982 = SURFACE_SIDE_STYLE('',(#551983)); +#551983 = SURFACE_STYLE_FILL_AREA(#551984); +#551984 = FILL_AREA_STYLE('',(#551985)); +#551985 = FILL_AREA_STYLE_COLOUR('',#546242); +#551986 = OVER_RIDING_STYLED_ITEM('overriding color',(#551987),#132450, + #551300); +#551987 = PRESENTATION_STYLE_ASSIGNMENT((#551988)); +#551988 = SURFACE_STYLE_USAGE(.BOTH.,#551989); +#551989 = SURFACE_SIDE_STYLE('',(#551990)); +#551990 = SURFACE_STYLE_FILL_AREA(#551991); +#551991 = FILL_AREA_STYLE('',(#551992)); +#551992 = FILL_AREA_STYLE_COLOUR('',#546242); +#551993 = OVER_RIDING_STYLED_ITEM('overriding color',(#551994),#132474, + #551300); +#551994 = PRESENTATION_STYLE_ASSIGNMENT((#551995)); +#551995 = SURFACE_STYLE_USAGE(.BOTH.,#551996); +#551996 = SURFACE_SIDE_STYLE('',(#551997)); +#551997 = SURFACE_STYLE_FILL_AREA(#551998); +#551998 = FILL_AREA_STYLE('',(#551999)); +#551999 = FILL_AREA_STYLE_COLOUR('',#546242); +#552000 = OVER_RIDING_STYLED_ITEM('overriding color',(#552001),#132498, + #551300); +#552001 = PRESENTATION_STYLE_ASSIGNMENT((#552002)); +#552002 = SURFACE_STYLE_USAGE(.BOTH.,#552003); +#552003 = SURFACE_SIDE_STYLE('',(#552004)); +#552004 = SURFACE_STYLE_FILL_AREA(#552005); +#552005 = FILL_AREA_STYLE('',(#552006)); +#552006 = FILL_AREA_STYLE_COLOUR('',#546242); +#552007 = OVER_RIDING_STYLED_ITEM('overriding color',(#552008),#132522, + #551300); +#552008 = PRESENTATION_STYLE_ASSIGNMENT((#552009)); +#552009 = SURFACE_STYLE_USAGE(.BOTH.,#552010); +#552010 = SURFACE_SIDE_STYLE('',(#552011)); +#552011 = SURFACE_STYLE_FILL_AREA(#552012); +#552012 = FILL_AREA_STYLE('',(#552013)); +#552013 = FILL_AREA_STYLE_COLOUR('',#546242); +#552014 = OVER_RIDING_STYLED_ITEM('overriding color',(#552015),#132546, + #551300); +#552015 = PRESENTATION_STYLE_ASSIGNMENT((#552016)); +#552016 = SURFACE_STYLE_USAGE(.BOTH.,#552017); +#552017 = SURFACE_SIDE_STYLE('',(#552018)); +#552018 = SURFACE_STYLE_FILL_AREA(#552019); +#552019 = FILL_AREA_STYLE('',(#552020)); +#552020 = FILL_AREA_STYLE_COLOUR('',#546242); +#552021 = OVER_RIDING_STYLED_ITEM('overriding color',(#552022),#132570, + #551300); +#552022 = PRESENTATION_STYLE_ASSIGNMENT((#552023)); +#552023 = SURFACE_STYLE_USAGE(.BOTH.,#552024); +#552024 = SURFACE_SIDE_STYLE('',(#552025)); +#552025 = SURFACE_STYLE_FILL_AREA(#552026); +#552026 = FILL_AREA_STYLE('',(#552027)); +#552027 = FILL_AREA_STYLE_COLOUR('',#546242); +#552028 = OVER_RIDING_STYLED_ITEM('overriding color',(#552029),#132587, + #551300); +#552029 = PRESENTATION_STYLE_ASSIGNMENT((#552030)); +#552030 = SURFACE_STYLE_USAGE(.BOTH.,#552031); +#552031 = SURFACE_SIDE_STYLE('',(#552032)); +#552032 = SURFACE_STYLE_FILL_AREA(#552033); +#552033 = FILL_AREA_STYLE('',(#552034)); +#552034 = FILL_AREA_STYLE_COLOUR('',#546242); +#552035 = OVER_RIDING_STYLED_ITEM('overriding color',(#552036),#132797, + #551300); +#552036 = PRESENTATION_STYLE_ASSIGNMENT((#552037)); +#552037 = SURFACE_STYLE_USAGE(.BOTH.,#552038); +#552038 = SURFACE_SIDE_STYLE('',(#552039)); +#552039 = SURFACE_STYLE_FILL_AREA(#552040); +#552040 = FILL_AREA_STYLE('',(#552041)); +#552041 = FILL_AREA_STYLE_COLOUR('',#546242); +#552042 = OVER_RIDING_STYLED_ITEM('overriding color',(#552043),#133159, + #551300); +#552043 = PRESENTATION_STYLE_ASSIGNMENT((#552044)); +#552044 = SURFACE_STYLE_USAGE(.BOTH.,#552045); +#552045 = SURFACE_SIDE_STYLE('',(#552046)); +#552046 = SURFACE_STYLE_FILL_AREA(#552047); +#552047 = FILL_AREA_STYLE('',(#552048)); +#552048 = FILL_AREA_STYLE_COLOUR('',#546242); +#552049 = OVER_RIDING_STYLED_ITEM('overriding color',(#552050),#133483, + #551300); +#552050 = PRESENTATION_STYLE_ASSIGNMENT((#552051)); +#552051 = SURFACE_STYLE_USAGE(.BOTH.,#552052); +#552052 = SURFACE_SIDE_STYLE('',(#552053)); +#552053 = SURFACE_STYLE_FILL_AREA(#552054); +#552054 = FILL_AREA_STYLE('',(#552055)); +#552055 = FILL_AREA_STYLE_COLOUR('',#546242); +#552056 = OVER_RIDING_STYLED_ITEM('overriding color',(#552057),#133505, + #551300); +#552057 = PRESENTATION_STYLE_ASSIGNMENT((#552058)); +#552058 = SURFACE_STYLE_USAGE(.BOTH.,#552059); +#552059 = SURFACE_SIDE_STYLE('',(#552060)); +#552060 = SURFACE_STYLE_FILL_AREA(#552061); +#552061 = FILL_AREA_STYLE('',(#552062)); +#552062 = FILL_AREA_STYLE_COLOUR('',#546242); +#552063 = OVER_RIDING_STYLED_ITEM('overriding color',(#552064),#133522, + #551300); +#552064 = PRESENTATION_STYLE_ASSIGNMENT((#552065)); +#552065 = SURFACE_STYLE_USAGE(.BOTH.,#552066); +#552066 = SURFACE_SIDE_STYLE('',(#552067)); +#552067 = SURFACE_STYLE_FILL_AREA(#552068); +#552068 = FILL_AREA_STYLE('',(#552069)); +#552069 = FILL_AREA_STYLE_COLOUR('',#546242); +#552070 = OVER_RIDING_STYLED_ITEM('overriding color',(#552071),#133539, + #551300); +#552071 = PRESENTATION_STYLE_ASSIGNMENT((#552072)); +#552072 = SURFACE_STYLE_USAGE(.BOTH.,#552073); +#552073 = SURFACE_SIDE_STYLE('',(#552074)); +#552074 = SURFACE_STYLE_FILL_AREA(#552075); +#552075 = FILL_AREA_STYLE('',(#552076)); +#552076 = FILL_AREA_STYLE_COLOUR('',#546242); +#552077 = OVER_RIDING_STYLED_ITEM('overriding color',(#552078),#133556, + #551300); +#552078 = PRESENTATION_STYLE_ASSIGNMENT((#552079)); +#552079 = SURFACE_STYLE_USAGE(.BOTH.,#552080); +#552080 = SURFACE_SIDE_STYLE('',(#552081)); +#552081 = SURFACE_STYLE_FILL_AREA(#552082); +#552082 = FILL_AREA_STYLE('',(#552083)); +#552083 = FILL_AREA_STYLE_COLOUR('',#546242); +#552084 = OVER_RIDING_STYLED_ITEM('overriding color',(#552085),#133573, + #551300); +#552085 = PRESENTATION_STYLE_ASSIGNMENT((#552086)); +#552086 = SURFACE_STYLE_USAGE(.BOTH.,#552087); +#552087 = SURFACE_SIDE_STYLE('',(#552088)); +#552088 = SURFACE_STYLE_FILL_AREA(#552089); +#552089 = FILL_AREA_STYLE('',(#552090)); +#552090 = FILL_AREA_STYLE_COLOUR('',#546242); +#552091 = OVER_RIDING_STYLED_ITEM('overriding color',(#552092),#133590, + #551300); +#552092 = PRESENTATION_STYLE_ASSIGNMENT((#552093)); +#552093 = SURFACE_STYLE_USAGE(.BOTH.,#552094); +#552094 = SURFACE_SIDE_STYLE('',(#552095)); +#552095 = SURFACE_STYLE_FILL_AREA(#552096); +#552096 = FILL_AREA_STYLE('',(#552097)); +#552097 = FILL_AREA_STYLE_COLOUR('',#546242); +#552098 = OVER_RIDING_STYLED_ITEM('overriding color',(#552099),#133607, + #551300); +#552099 = PRESENTATION_STYLE_ASSIGNMENT((#552100)); +#552100 = SURFACE_STYLE_USAGE(.BOTH.,#552101); +#552101 = SURFACE_SIDE_STYLE('',(#552102)); +#552102 = SURFACE_STYLE_FILL_AREA(#552103); +#552103 = FILL_AREA_STYLE('',(#552104)); +#552104 = FILL_AREA_STYLE_COLOUR('',#546242); +#552105 = OVER_RIDING_STYLED_ITEM('overriding color',(#552106),#133624, + #551300); +#552106 = PRESENTATION_STYLE_ASSIGNMENT((#552107)); +#552107 = SURFACE_STYLE_USAGE(.BOTH.,#552108); +#552108 = SURFACE_SIDE_STYLE('',(#552109)); +#552109 = SURFACE_STYLE_FILL_AREA(#552110); +#552110 = FILL_AREA_STYLE('',(#552111)); +#552111 = FILL_AREA_STYLE_COLOUR('',#546242); +#552112 = OVER_RIDING_STYLED_ITEM('overriding color',(#552113),#133641, + #551300); +#552113 = PRESENTATION_STYLE_ASSIGNMENT((#552114)); +#552114 = SURFACE_STYLE_USAGE(.BOTH.,#552115); +#552115 = SURFACE_SIDE_STYLE('',(#552116)); +#552116 = SURFACE_STYLE_FILL_AREA(#552117); +#552117 = FILL_AREA_STYLE('',(#552118)); +#552118 = FILL_AREA_STYLE_COLOUR('',#546242); +#552119 = OVER_RIDING_STYLED_ITEM('overriding color',(#552120),#133658, + #551300); +#552120 = PRESENTATION_STYLE_ASSIGNMENT((#552121)); +#552121 = SURFACE_STYLE_USAGE(.BOTH.,#552122); +#552122 = SURFACE_SIDE_STYLE('',(#552123)); +#552123 = SURFACE_STYLE_FILL_AREA(#552124); +#552124 = FILL_AREA_STYLE('',(#552125)); +#552125 = FILL_AREA_STYLE_COLOUR('',#546242); +#552126 = OVER_RIDING_STYLED_ITEM('overriding color',(#552127),#133675, + #551300); +#552127 = PRESENTATION_STYLE_ASSIGNMENT((#552128)); +#552128 = SURFACE_STYLE_USAGE(.BOTH.,#552129); +#552129 = SURFACE_SIDE_STYLE('',(#552130)); +#552130 = SURFACE_STYLE_FILL_AREA(#552131); +#552131 = FILL_AREA_STYLE('',(#552132)); +#552132 = FILL_AREA_STYLE_COLOUR('',#546242); +#552133 = OVER_RIDING_STYLED_ITEM('overriding color',(#552134),#133692, + #551300); +#552134 = PRESENTATION_STYLE_ASSIGNMENT((#552135)); +#552135 = SURFACE_STYLE_USAGE(.BOTH.,#552136); +#552136 = SURFACE_SIDE_STYLE('',(#552137)); +#552137 = SURFACE_STYLE_FILL_AREA(#552138); +#552138 = FILL_AREA_STYLE('',(#552139)); +#552139 = FILL_AREA_STYLE_COLOUR('',#546242); +#552140 = OVER_RIDING_STYLED_ITEM('overriding color',(#552141),#133709, + #551300); +#552141 = PRESENTATION_STYLE_ASSIGNMENT((#552142)); +#552142 = SURFACE_STYLE_USAGE(.BOTH.,#552143); +#552143 = SURFACE_SIDE_STYLE('',(#552144)); +#552144 = SURFACE_STYLE_FILL_AREA(#552145); +#552145 = FILL_AREA_STYLE('',(#552146)); +#552146 = FILL_AREA_STYLE_COLOUR('',#546242); +#552147 = OVER_RIDING_STYLED_ITEM('overriding color',(#552148),#133726, + #551300); +#552148 = PRESENTATION_STYLE_ASSIGNMENT((#552149)); +#552149 = SURFACE_STYLE_USAGE(.BOTH.,#552150); +#552150 = SURFACE_SIDE_STYLE('',(#552151)); +#552151 = SURFACE_STYLE_FILL_AREA(#552152); +#552152 = FILL_AREA_STYLE('',(#552153)); +#552153 = FILL_AREA_STYLE_COLOUR('',#546242); +#552154 = OVER_RIDING_STYLED_ITEM('overriding color',(#552155),#133743, + #551300); +#552155 = PRESENTATION_STYLE_ASSIGNMENT((#552156)); +#552156 = SURFACE_STYLE_USAGE(.BOTH.,#552157); +#552157 = SURFACE_SIDE_STYLE('',(#552158)); +#552158 = SURFACE_STYLE_FILL_AREA(#552159); +#552159 = FILL_AREA_STYLE('',(#552160)); +#552160 = FILL_AREA_STYLE_COLOUR('',#546242); +#552161 = OVER_RIDING_STYLED_ITEM('overriding color',(#552162),#133760, + #551300); +#552162 = PRESENTATION_STYLE_ASSIGNMENT((#552163)); +#552163 = SURFACE_STYLE_USAGE(.BOTH.,#552164); +#552164 = SURFACE_SIDE_STYLE('',(#552165)); +#552165 = SURFACE_STYLE_FILL_AREA(#552166); +#552166 = FILL_AREA_STYLE('',(#552167)); +#552167 = FILL_AREA_STYLE_COLOUR('',#546242); +#552168 = OVER_RIDING_STYLED_ITEM('overriding color',(#552169),#133777, + #551300); +#552169 = PRESENTATION_STYLE_ASSIGNMENT((#552170)); +#552170 = SURFACE_STYLE_USAGE(.BOTH.,#552171); +#552171 = SURFACE_SIDE_STYLE('',(#552172)); +#552172 = SURFACE_STYLE_FILL_AREA(#552173); +#552173 = FILL_AREA_STYLE('',(#552174)); +#552174 = FILL_AREA_STYLE_COLOUR('',#546242); +#552175 = OVER_RIDING_STYLED_ITEM('overriding color',(#552176),#133794, + #551300); +#552176 = PRESENTATION_STYLE_ASSIGNMENT((#552177)); +#552177 = SURFACE_STYLE_USAGE(.BOTH.,#552178); +#552178 = SURFACE_SIDE_STYLE('',(#552179)); +#552179 = SURFACE_STYLE_FILL_AREA(#552180); +#552180 = FILL_AREA_STYLE('',(#552181)); +#552181 = FILL_AREA_STYLE_COLOUR('',#546242); +#552182 = OVER_RIDING_STYLED_ITEM('overriding color',(#552183),#133811, + #551300); +#552183 = PRESENTATION_STYLE_ASSIGNMENT((#552184)); +#552184 = SURFACE_STYLE_USAGE(.BOTH.,#552185); +#552185 = SURFACE_SIDE_STYLE('',(#552186)); +#552186 = SURFACE_STYLE_FILL_AREA(#552187); +#552187 = FILL_AREA_STYLE('',(#552188)); +#552188 = FILL_AREA_STYLE_COLOUR('',#546242); +#552189 = OVER_RIDING_STYLED_ITEM('overriding color',(#552190),#133823, + #551300); +#552190 = PRESENTATION_STYLE_ASSIGNMENT((#552191)); +#552191 = SURFACE_STYLE_USAGE(.BOTH.,#552192); +#552192 = SURFACE_SIDE_STYLE('',(#552193)); +#552193 = SURFACE_STYLE_FILL_AREA(#552194); +#552194 = FILL_AREA_STYLE('',(#552195)); +#552195 = FILL_AREA_STYLE_COLOUR('',#546242); +#552196 = OVER_RIDING_STYLED_ITEM('overriding color',(#552197),#133845, + #551300); +#552197 = PRESENTATION_STYLE_ASSIGNMENT((#552198)); +#552198 = SURFACE_STYLE_USAGE(.BOTH.,#552199); +#552199 = SURFACE_SIDE_STYLE('',(#552200)); +#552200 = SURFACE_STYLE_FILL_AREA(#552201); +#552201 = FILL_AREA_STYLE('',(#552202)); +#552202 = FILL_AREA_STYLE_COLOUR('',#546242); +#552203 = OVER_RIDING_STYLED_ITEM('overriding color',(#552204),#133862, + #551300); +#552204 = PRESENTATION_STYLE_ASSIGNMENT((#552205)); +#552205 = SURFACE_STYLE_USAGE(.BOTH.,#552206); +#552206 = SURFACE_SIDE_STYLE('',(#552207)); +#552207 = SURFACE_STYLE_FILL_AREA(#552208); +#552208 = FILL_AREA_STYLE('',(#552209)); +#552209 = FILL_AREA_STYLE_COLOUR('',#546242); +#552210 = OVER_RIDING_STYLED_ITEM('overriding color',(#552211),#133879, + #551300); +#552211 = PRESENTATION_STYLE_ASSIGNMENT((#552212)); +#552212 = SURFACE_STYLE_USAGE(.BOTH.,#552213); +#552213 = SURFACE_SIDE_STYLE('',(#552214)); +#552214 = SURFACE_STYLE_FILL_AREA(#552215); +#552215 = FILL_AREA_STYLE('',(#552216)); +#552216 = FILL_AREA_STYLE_COLOUR('',#546242); +#552217 = OVER_RIDING_STYLED_ITEM('overriding color',(#552218),#133896, + #551300); +#552218 = PRESENTATION_STYLE_ASSIGNMENT((#552219)); +#552219 = SURFACE_STYLE_USAGE(.BOTH.,#552220); +#552220 = SURFACE_SIDE_STYLE('',(#552221)); +#552221 = SURFACE_STYLE_FILL_AREA(#552222); +#552222 = FILL_AREA_STYLE('',(#552223)); +#552223 = FILL_AREA_STYLE_COLOUR('',#546242); +#552224 = OVER_RIDING_STYLED_ITEM('overriding color',(#552225),#133913, + #551300); +#552225 = PRESENTATION_STYLE_ASSIGNMENT((#552226)); +#552226 = SURFACE_STYLE_USAGE(.BOTH.,#552227); +#552227 = SURFACE_SIDE_STYLE('',(#552228)); +#552228 = SURFACE_STYLE_FILL_AREA(#552229); +#552229 = FILL_AREA_STYLE('',(#552230)); +#552230 = FILL_AREA_STYLE_COLOUR('',#546242); +#552231 = OVER_RIDING_STYLED_ITEM('overriding color',(#552232),#133930, + #551300); +#552232 = PRESENTATION_STYLE_ASSIGNMENT((#552233)); +#552233 = SURFACE_STYLE_USAGE(.BOTH.,#552234); +#552234 = SURFACE_SIDE_STYLE('',(#552235)); +#552235 = SURFACE_STYLE_FILL_AREA(#552236); +#552236 = FILL_AREA_STYLE('',(#552237)); +#552237 = FILL_AREA_STYLE_COLOUR('',#546242); +#552238 = OVER_RIDING_STYLED_ITEM('overriding color',(#552239),#133947, + #551300); +#552239 = PRESENTATION_STYLE_ASSIGNMENT((#552240)); +#552240 = SURFACE_STYLE_USAGE(.BOTH.,#552241); +#552241 = SURFACE_SIDE_STYLE('',(#552242)); +#552242 = SURFACE_STYLE_FILL_AREA(#552243); +#552243 = FILL_AREA_STYLE('',(#552244)); +#552244 = FILL_AREA_STYLE_COLOUR('',#546242); +#552245 = OVER_RIDING_STYLED_ITEM('overriding color',(#552246),#133964, + #551300); +#552246 = PRESENTATION_STYLE_ASSIGNMENT((#552247)); +#552247 = SURFACE_STYLE_USAGE(.BOTH.,#552248); +#552248 = SURFACE_SIDE_STYLE('',(#552249)); +#552249 = SURFACE_STYLE_FILL_AREA(#552250); +#552250 = FILL_AREA_STYLE('',(#552251)); +#552251 = FILL_AREA_STYLE_COLOUR('',#546242); +#552252 = OVER_RIDING_STYLED_ITEM('overriding color',(#552253),#133981, + #551300); +#552253 = PRESENTATION_STYLE_ASSIGNMENT((#552254)); +#552254 = SURFACE_STYLE_USAGE(.BOTH.,#552255); +#552255 = SURFACE_SIDE_STYLE('',(#552256)); +#552256 = SURFACE_STYLE_FILL_AREA(#552257); +#552257 = FILL_AREA_STYLE('',(#552258)); +#552258 = FILL_AREA_STYLE_COLOUR('',#546242); +#552259 = OVER_RIDING_STYLED_ITEM('overriding color',(#552260),#133998, + #551300); +#552260 = PRESENTATION_STYLE_ASSIGNMENT((#552261)); +#552261 = SURFACE_STYLE_USAGE(.BOTH.,#552262); +#552262 = SURFACE_SIDE_STYLE('',(#552263)); +#552263 = SURFACE_STYLE_FILL_AREA(#552264); +#552264 = FILL_AREA_STYLE('',(#552265)); +#552265 = FILL_AREA_STYLE_COLOUR('',#546242); +#552266 = OVER_RIDING_STYLED_ITEM('overriding color',(#552267),#134015, + #551300); +#552267 = PRESENTATION_STYLE_ASSIGNMENT((#552268)); +#552268 = SURFACE_STYLE_USAGE(.BOTH.,#552269); +#552269 = SURFACE_SIDE_STYLE('',(#552270)); +#552270 = SURFACE_STYLE_FILL_AREA(#552271); +#552271 = FILL_AREA_STYLE('',(#552272)); +#552272 = FILL_AREA_STYLE_COLOUR('',#546242); +#552273 = OVER_RIDING_STYLED_ITEM('overriding color',(#552274),#134032, + #551300); +#552274 = PRESENTATION_STYLE_ASSIGNMENT((#552275)); +#552275 = SURFACE_STYLE_USAGE(.BOTH.,#552276); +#552276 = SURFACE_SIDE_STYLE('',(#552277)); +#552277 = SURFACE_STYLE_FILL_AREA(#552278); +#552278 = FILL_AREA_STYLE('',(#552279)); +#552279 = FILL_AREA_STYLE_COLOUR('',#546242); +#552280 = OVER_RIDING_STYLED_ITEM('overriding color',(#552281),#134049, + #551300); +#552281 = PRESENTATION_STYLE_ASSIGNMENT((#552282)); +#552282 = SURFACE_STYLE_USAGE(.BOTH.,#552283); +#552283 = SURFACE_SIDE_STYLE('',(#552284)); +#552284 = SURFACE_STYLE_FILL_AREA(#552285); +#552285 = FILL_AREA_STYLE('',(#552286)); +#552286 = FILL_AREA_STYLE_COLOUR('',#546242); +#552287 = OVER_RIDING_STYLED_ITEM('overriding color',(#552288),#134066, + #551300); +#552288 = PRESENTATION_STYLE_ASSIGNMENT((#552289)); +#552289 = SURFACE_STYLE_USAGE(.BOTH.,#552290); +#552290 = SURFACE_SIDE_STYLE('',(#552291)); +#552291 = SURFACE_STYLE_FILL_AREA(#552292); +#552292 = FILL_AREA_STYLE('',(#552293)); +#552293 = FILL_AREA_STYLE_COLOUR('',#546242); +#552294 = OVER_RIDING_STYLED_ITEM('overriding color',(#552295),#134083, + #551300); +#552295 = PRESENTATION_STYLE_ASSIGNMENT((#552296)); +#552296 = SURFACE_STYLE_USAGE(.BOTH.,#552297); +#552297 = SURFACE_SIDE_STYLE('',(#552298)); +#552298 = SURFACE_STYLE_FILL_AREA(#552299); +#552299 = FILL_AREA_STYLE('',(#552300)); +#552300 = FILL_AREA_STYLE_COLOUR('',#546242); +#552301 = OVER_RIDING_STYLED_ITEM('overriding color',(#552302),#134100, + #551300); +#552302 = PRESENTATION_STYLE_ASSIGNMENT((#552303)); +#552303 = SURFACE_STYLE_USAGE(.BOTH.,#552304); +#552304 = SURFACE_SIDE_STYLE('',(#552305)); +#552305 = SURFACE_STYLE_FILL_AREA(#552306); +#552306 = FILL_AREA_STYLE('',(#552307)); +#552307 = FILL_AREA_STYLE_COLOUR('',#546242); +#552308 = OVER_RIDING_STYLED_ITEM('overriding color',(#552309),#134117, + #551300); +#552309 = PRESENTATION_STYLE_ASSIGNMENT((#552310)); +#552310 = SURFACE_STYLE_USAGE(.BOTH.,#552311); +#552311 = SURFACE_SIDE_STYLE('',(#552312)); +#552312 = SURFACE_STYLE_FILL_AREA(#552313); +#552313 = FILL_AREA_STYLE('',(#552314)); +#552314 = FILL_AREA_STYLE_COLOUR('',#546242); +#552315 = OVER_RIDING_STYLED_ITEM('overriding color',(#552316),#134134, + #551300); +#552316 = PRESENTATION_STYLE_ASSIGNMENT((#552317)); +#552317 = SURFACE_STYLE_USAGE(.BOTH.,#552318); +#552318 = SURFACE_SIDE_STYLE('',(#552319)); +#552319 = SURFACE_STYLE_FILL_AREA(#552320); +#552320 = FILL_AREA_STYLE('',(#552321)); +#552321 = FILL_AREA_STYLE_COLOUR('',#546242); +#552322 = OVER_RIDING_STYLED_ITEM('overriding color',(#552323),#134151, + #551300); +#552323 = PRESENTATION_STYLE_ASSIGNMENT((#552324)); +#552324 = SURFACE_STYLE_USAGE(.BOTH.,#552325); +#552325 = SURFACE_SIDE_STYLE('',(#552326)); +#552326 = SURFACE_STYLE_FILL_AREA(#552327); +#552327 = FILL_AREA_STYLE('',(#552328)); +#552328 = FILL_AREA_STYLE_COLOUR('',#546242); +#552329 = OVER_RIDING_STYLED_ITEM('overriding color',(#552330),#134168, + #551300); +#552330 = PRESENTATION_STYLE_ASSIGNMENT((#552331)); +#552331 = SURFACE_STYLE_USAGE(.BOTH.,#552332); +#552332 = SURFACE_SIDE_STYLE('',(#552333)); +#552333 = SURFACE_STYLE_FILL_AREA(#552334); +#552334 = FILL_AREA_STYLE('',(#552335)); +#552335 = FILL_AREA_STYLE_COLOUR('',#546242); +#552336 = OVER_RIDING_STYLED_ITEM('overriding color',(#552337),#134185, + #551300); +#552337 = PRESENTATION_STYLE_ASSIGNMENT((#552338)); +#552338 = SURFACE_STYLE_USAGE(.BOTH.,#552339); +#552339 = SURFACE_SIDE_STYLE('',(#552340)); +#552340 = SURFACE_STYLE_FILL_AREA(#552341); +#552341 = FILL_AREA_STYLE('',(#552342)); +#552342 = FILL_AREA_STYLE_COLOUR('',#546242); +#552343 = OVER_RIDING_STYLED_ITEM('overriding color',(#552344),#134202, + #551300); +#552344 = PRESENTATION_STYLE_ASSIGNMENT((#552345)); +#552345 = SURFACE_STYLE_USAGE(.BOTH.,#552346); +#552346 = SURFACE_SIDE_STYLE('',(#552347)); +#552347 = SURFACE_STYLE_FILL_AREA(#552348); +#552348 = FILL_AREA_STYLE('',(#552349)); +#552349 = FILL_AREA_STYLE_COLOUR('',#546242); +#552350 = OVER_RIDING_STYLED_ITEM('overriding color',(#552351),#134219, + #551300); +#552351 = PRESENTATION_STYLE_ASSIGNMENT((#552352)); +#552352 = SURFACE_STYLE_USAGE(.BOTH.,#552353); +#552353 = SURFACE_SIDE_STYLE('',(#552354)); +#552354 = SURFACE_STYLE_FILL_AREA(#552355); +#552355 = FILL_AREA_STYLE('',(#552356)); +#552356 = FILL_AREA_STYLE_COLOUR('',#546242); +#552357 = OVER_RIDING_STYLED_ITEM('overriding color',(#552358),#134236, + #551300); +#552358 = PRESENTATION_STYLE_ASSIGNMENT((#552359)); +#552359 = SURFACE_STYLE_USAGE(.BOTH.,#552360); +#552360 = SURFACE_SIDE_STYLE('',(#552361)); +#552361 = SURFACE_STYLE_FILL_AREA(#552362); +#552362 = FILL_AREA_STYLE('',(#552363)); +#552363 = FILL_AREA_STYLE_COLOUR('',#546242); +#552364 = OVER_RIDING_STYLED_ITEM('overriding color',(#552365),#134253, + #551300); +#552365 = PRESENTATION_STYLE_ASSIGNMENT((#552366)); +#552366 = SURFACE_STYLE_USAGE(.BOTH.,#552367); +#552367 = SURFACE_SIDE_STYLE('',(#552368)); +#552368 = SURFACE_STYLE_FILL_AREA(#552369); +#552369 = FILL_AREA_STYLE('',(#552370)); +#552370 = FILL_AREA_STYLE_COLOUR('',#546242); +#552371 = OVER_RIDING_STYLED_ITEM('overriding color',(#552372),#134265, + #551300); +#552372 = PRESENTATION_STYLE_ASSIGNMENT((#552373)); +#552373 = SURFACE_STYLE_USAGE(.BOTH.,#552374); +#552374 = SURFACE_SIDE_STYLE('',(#552375)); +#552375 = SURFACE_STYLE_FILL_AREA(#552376); +#552376 = FILL_AREA_STYLE('',(#552377)); +#552377 = FILL_AREA_STYLE_COLOUR('',#546242); +#552378 = OVER_RIDING_STYLED_ITEM('overriding color',(#552379),#134287, + #551300); +#552379 = PRESENTATION_STYLE_ASSIGNMENT((#552380)); +#552380 = SURFACE_STYLE_USAGE(.BOTH.,#552381); +#552381 = SURFACE_SIDE_STYLE('',(#552382)); +#552382 = SURFACE_STYLE_FILL_AREA(#552383); +#552383 = FILL_AREA_STYLE('',(#552384)); +#552384 = FILL_AREA_STYLE_COLOUR('',#546242); +#552385 = OVER_RIDING_STYLED_ITEM('overriding color',(#552386),#134304, + #551300); +#552386 = PRESENTATION_STYLE_ASSIGNMENT((#552387)); +#552387 = SURFACE_STYLE_USAGE(.BOTH.,#552388); +#552388 = SURFACE_SIDE_STYLE('',(#552389)); +#552389 = SURFACE_STYLE_FILL_AREA(#552390); +#552390 = FILL_AREA_STYLE('',(#552391)); +#552391 = FILL_AREA_STYLE_COLOUR('',#546242); +#552392 = OVER_RIDING_STYLED_ITEM('overriding color',(#552393),#134321, + #551300); +#552393 = PRESENTATION_STYLE_ASSIGNMENT((#552394)); +#552394 = SURFACE_STYLE_USAGE(.BOTH.,#552395); +#552395 = SURFACE_SIDE_STYLE('',(#552396)); +#552396 = SURFACE_STYLE_FILL_AREA(#552397); +#552397 = FILL_AREA_STYLE('',(#552398)); +#552398 = FILL_AREA_STYLE_COLOUR('',#546242); +#552399 = OVER_RIDING_STYLED_ITEM('overriding color',(#552400),#134338, + #551300); +#552400 = PRESENTATION_STYLE_ASSIGNMENT((#552401)); +#552401 = SURFACE_STYLE_USAGE(.BOTH.,#552402); +#552402 = SURFACE_SIDE_STYLE('',(#552403)); +#552403 = SURFACE_STYLE_FILL_AREA(#552404); +#552404 = FILL_AREA_STYLE('',(#552405)); +#552405 = FILL_AREA_STYLE_COLOUR('',#546242); +#552406 = OVER_RIDING_STYLED_ITEM('overriding color',(#552407),#134355, + #551300); +#552407 = PRESENTATION_STYLE_ASSIGNMENT((#552408)); +#552408 = SURFACE_STYLE_USAGE(.BOTH.,#552409); +#552409 = SURFACE_SIDE_STYLE('',(#552410)); +#552410 = SURFACE_STYLE_FILL_AREA(#552411); +#552411 = FILL_AREA_STYLE('',(#552412)); +#552412 = FILL_AREA_STYLE_COLOUR('',#546242); +#552413 = OVER_RIDING_STYLED_ITEM('overriding color',(#552414),#134372, + #551300); +#552414 = PRESENTATION_STYLE_ASSIGNMENT((#552415)); +#552415 = SURFACE_STYLE_USAGE(.BOTH.,#552416); +#552416 = SURFACE_SIDE_STYLE('',(#552417)); +#552417 = SURFACE_STYLE_FILL_AREA(#552418); +#552418 = FILL_AREA_STYLE('',(#552419)); +#552419 = FILL_AREA_STYLE_COLOUR('',#546242); +#552420 = OVER_RIDING_STYLED_ITEM('overriding color',(#552421),#134389, + #551300); +#552421 = PRESENTATION_STYLE_ASSIGNMENT((#552422)); +#552422 = SURFACE_STYLE_USAGE(.BOTH.,#552423); +#552423 = SURFACE_SIDE_STYLE('',(#552424)); +#552424 = SURFACE_STYLE_FILL_AREA(#552425); +#552425 = FILL_AREA_STYLE('',(#552426)); +#552426 = FILL_AREA_STYLE_COLOUR('',#546242); +#552427 = OVER_RIDING_STYLED_ITEM('overriding color',(#552428),#134406, + #551300); +#552428 = PRESENTATION_STYLE_ASSIGNMENT((#552429)); +#552429 = SURFACE_STYLE_USAGE(.BOTH.,#552430); +#552430 = SURFACE_SIDE_STYLE('',(#552431)); +#552431 = SURFACE_STYLE_FILL_AREA(#552432); +#552432 = FILL_AREA_STYLE('',(#552433)); +#552433 = FILL_AREA_STYLE_COLOUR('',#546242); +#552434 = OVER_RIDING_STYLED_ITEM('overriding color',(#552435),#134423, + #551300); +#552435 = PRESENTATION_STYLE_ASSIGNMENT((#552436)); +#552436 = SURFACE_STYLE_USAGE(.BOTH.,#552437); +#552437 = SURFACE_SIDE_STYLE('',(#552438)); +#552438 = SURFACE_STYLE_FILL_AREA(#552439); +#552439 = FILL_AREA_STYLE('',(#552440)); +#552440 = FILL_AREA_STYLE_COLOUR('',#546242); +#552441 = OVER_RIDING_STYLED_ITEM('overriding color',(#552442),#134440, + #551300); +#552442 = PRESENTATION_STYLE_ASSIGNMENT((#552443)); +#552443 = SURFACE_STYLE_USAGE(.BOTH.,#552444); +#552444 = SURFACE_SIDE_STYLE('',(#552445)); +#552445 = SURFACE_STYLE_FILL_AREA(#552446); +#552446 = FILL_AREA_STYLE('',(#552447)); +#552447 = FILL_AREA_STYLE_COLOUR('',#546242); +#552448 = OVER_RIDING_STYLED_ITEM('overriding color',(#552449),#134457, + #551300); +#552449 = PRESENTATION_STYLE_ASSIGNMENT((#552450)); +#552450 = SURFACE_STYLE_USAGE(.BOTH.,#552451); +#552451 = SURFACE_SIDE_STYLE('',(#552452)); +#552452 = SURFACE_STYLE_FILL_AREA(#552453); +#552453 = FILL_AREA_STYLE('',(#552454)); +#552454 = FILL_AREA_STYLE_COLOUR('',#546242); +#552455 = OVER_RIDING_STYLED_ITEM('overriding color',(#552456),#134474, + #551300); +#552456 = PRESENTATION_STYLE_ASSIGNMENT((#552457)); +#552457 = SURFACE_STYLE_USAGE(.BOTH.,#552458); +#552458 = SURFACE_SIDE_STYLE('',(#552459)); +#552459 = SURFACE_STYLE_FILL_AREA(#552460); +#552460 = FILL_AREA_STYLE('',(#552461)); +#552461 = FILL_AREA_STYLE_COLOUR('',#546242); +#552462 = OVER_RIDING_STYLED_ITEM('overriding color',(#552463),#134491, + #551300); +#552463 = PRESENTATION_STYLE_ASSIGNMENT((#552464)); +#552464 = SURFACE_STYLE_USAGE(.BOTH.,#552465); +#552465 = SURFACE_SIDE_STYLE('',(#552466)); +#552466 = SURFACE_STYLE_FILL_AREA(#552467); +#552467 = FILL_AREA_STYLE('',(#552468)); +#552468 = FILL_AREA_STYLE_COLOUR('',#546242); +#552469 = OVER_RIDING_STYLED_ITEM('overriding color',(#552470),#134508, + #551300); +#552470 = PRESENTATION_STYLE_ASSIGNMENT((#552471)); +#552471 = SURFACE_STYLE_USAGE(.BOTH.,#552472); +#552472 = SURFACE_SIDE_STYLE('',(#552473)); +#552473 = SURFACE_STYLE_FILL_AREA(#552474); +#552474 = FILL_AREA_STYLE('',(#552475)); +#552475 = FILL_AREA_STYLE_COLOUR('',#546242); +#552476 = OVER_RIDING_STYLED_ITEM('overriding color',(#552477),#134525, + #551300); +#552477 = PRESENTATION_STYLE_ASSIGNMENT((#552478)); +#552478 = SURFACE_STYLE_USAGE(.BOTH.,#552479); +#552479 = SURFACE_SIDE_STYLE('',(#552480)); +#552480 = SURFACE_STYLE_FILL_AREA(#552481); +#552481 = FILL_AREA_STYLE('',(#552482)); +#552482 = FILL_AREA_STYLE_COLOUR('',#546242); +#552483 = OVER_RIDING_STYLED_ITEM('overriding color',(#552484),#134542, + #551300); +#552484 = PRESENTATION_STYLE_ASSIGNMENT((#552485)); +#552485 = SURFACE_STYLE_USAGE(.BOTH.,#552486); +#552486 = SURFACE_SIDE_STYLE('',(#552487)); +#552487 = SURFACE_STYLE_FILL_AREA(#552488); +#552488 = FILL_AREA_STYLE('',(#552489)); +#552489 = FILL_AREA_STYLE_COLOUR('',#546242); +#552490 = OVER_RIDING_STYLED_ITEM('overriding color',(#552491),#134559, + #551300); +#552491 = PRESENTATION_STYLE_ASSIGNMENT((#552492)); +#552492 = SURFACE_STYLE_USAGE(.BOTH.,#552493); +#552493 = SURFACE_SIDE_STYLE('',(#552494)); +#552494 = SURFACE_STYLE_FILL_AREA(#552495); +#552495 = FILL_AREA_STYLE('',(#552496)); +#552496 = FILL_AREA_STYLE_COLOUR('',#546242); +#552497 = OVER_RIDING_STYLED_ITEM('overriding color',(#552498),#134571, + #551300); +#552498 = PRESENTATION_STYLE_ASSIGNMENT((#552499)); +#552499 = SURFACE_STYLE_USAGE(.BOTH.,#552500); +#552500 = SURFACE_SIDE_STYLE('',(#552501)); +#552501 = SURFACE_STYLE_FILL_AREA(#552502); +#552502 = FILL_AREA_STYLE('',(#552503)); +#552503 = FILL_AREA_STYLE_COLOUR('',#546242); +#552504 = OVER_RIDING_STYLED_ITEM('overriding color',(#552505),#134593, + #551300); +#552505 = PRESENTATION_STYLE_ASSIGNMENT((#552506)); +#552506 = SURFACE_STYLE_USAGE(.BOTH.,#552507); +#552507 = SURFACE_SIDE_STYLE('',(#552508)); +#552508 = SURFACE_STYLE_FILL_AREA(#552509); +#552509 = FILL_AREA_STYLE('',(#552510)); +#552510 = FILL_AREA_STYLE_COLOUR('',#546242); +#552511 = OVER_RIDING_STYLED_ITEM('overriding color',(#552512),#134610, + #551300); +#552512 = PRESENTATION_STYLE_ASSIGNMENT((#552513)); +#552513 = SURFACE_STYLE_USAGE(.BOTH.,#552514); +#552514 = SURFACE_SIDE_STYLE('',(#552515)); +#552515 = SURFACE_STYLE_FILL_AREA(#552516); +#552516 = FILL_AREA_STYLE('',(#552517)); +#552517 = FILL_AREA_STYLE_COLOUR('',#546242); +#552518 = OVER_RIDING_STYLED_ITEM('overriding color',(#552519),#134627, + #551300); +#552519 = PRESENTATION_STYLE_ASSIGNMENT((#552520)); +#552520 = SURFACE_STYLE_USAGE(.BOTH.,#552521); +#552521 = SURFACE_SIDE_STYLE('',(#552522)); +#552522 = SURFACE_STYLE_FILL_AREA(#552523); +#552523 = FILL_AREA_STYLE('',(#552524)); +#552524 = FILL_AREA_STYLE_COLOUR('',#546242); +#552525 = OVER_RIDING_STYLED_ITEM('overriding color',(#552526),#134644, + #551300); +#552526 = PRESENTATION_STYLE_ASSIGNMENT((#552527)); +#552527 = SURFACE_STYLE_USAGE(.BOTH.,#552528); +#552528 = SURFACE_SIDE_STYLE('',(#552529)); +#552529 = SURFACE_STYLE_FILL_AREA(#552530); +#552530 = FILL_AREA_STYLE('',(#552531)); +#552531 = FILL_AREA_STYLE_COLOUR('',#546242); +#552532 = OVER_RIDING_STYLED_ITEM('overriding color',(#552533),#134661, + #551300); +#552533 = PRESENTATION_STYLE_ASSIGNMENT((#552534)); +#552534 = SURFACE_STYLE_USAGE(.BOTH.,#552535); +#552535 = SURFACE_SIDE_STYLE('',(#552536)); +#552536 = SURFACE_STYLE_FILL_AREA(#552537); +#552537 = FILL_AREA_STYLE('',(#552538)); +#552538 = FILL_AREA_STYLE_COLOUR('',#546242); +#552539 = OVER_RIDING_STYLED_ITEM('overriding color',(#552540),#134678, + #551300); +#552540 = PRESENTATION_STYLE_ASSIGNMENT((#552541)); +#552541 = SURFACE_STYLE_USAGE(.BOTH.,#552542); +#552542 = SURFACE_SIDE_STYLE('',(#552543)); +#552543 = SURFACE_STYLE_FILL_AREA(#552544); +#552544 = FILL_AREA_STYLE('',(#552545)); +#552545 = FILL_AREA_STYLE_COLOUR('',#546242); +#552546 = OVER_RIDING_STYLED_ITEM('overriding color',(#552547),#134695, + #551300); +#552547 = PRESENTATION_STYLE_ASSIGNMENT((#552548)); +#552548 = SURFACE_STYLE_USAGE(.BOTH.,#552549); +#552549 = SURFACE_SIDE_STYLE('',(#552550)); +#552550 = SURFACE_STYLE_FILL_AREA(#552551); +#552551 = FILL_AREA_STYLE('',(#552552)); +#552552 = FILL_AREA_STYLE_COLOUR('',#546242); +#552553 = OVER_RIDING_STYLED_ITEM('overriding color',(#552554),#134712, + #551300); +#552554 = PRESENTATION_STYLE_ASSIGNMENT((#552555)); +#552555 = SURFACE_STYLE_USAGE(.BOTH.,#552556); +#552556 = SURFACE_SIDE_STYLE('',(#552557)); +#552557 = SURFACE_STYLE_FILL_AREA(#552558); +#552558 = FILL_AREA_STYLE('',(#552559)); +#552559 = FILL_AREA_STYLE_COLOUR('',#546242); +#552560 = OVER_RIDING_STYLED_ITEM('overriding color',(#552561),#134729, + #551300); +#552561 = PRESENTATION_STYLE_ASSIGNMENT((#552562)); +#552562 = SURFACE_STYLE_USAGE(.BOTH.,#552563); +#552563 = SURFACE_SIDE_STYLE('',(#552564)); +#552564 = SURFACE_STYLE_FILL_AREA(#552565); +#552565 = FILL_AREA_STYLE('',(#552566)); +#552566 = FILL_AREA_STYLE_COLOUR('',#546242); +#552567 = OVER_RIDING_STYLED_ITEM('overriding color',(#552568),#134746, + #551300); +#552568 = PRESENTATION_STYLE_ASSIGNMENT((#552569)); +#552569 = SURFACE_STYLE_USAGE(.BOTH.,#552570); +#552570 = SURFACE_SIDE_STYLE('',(#552571)); +#552571 = SURFACE_STYLE_FILL_AREA(#552572); +#552572 = FILL_AREA_STYLE('',(#552573)); +#552573 = FILL_AREA_STYLE_COLOUR('',#546242); +#552574 = OVER_RIDING_STYLED_ITEM('overriding color',(#552575),#134763, + #551300); +#552575 = PRESENTATION_STYLE_ASSIGNMENT((#552576)); +#552576 = SURFACE_STYLE_USAGE(.BOTH.,#552577); +#552577 = SURFACE_SIDE_STYLE('',(#552578)); +#552578 = SURFACE_STYLE_FILL_AREA(#552579); +#552579 = FILL_AREA_STYLE('',(#552580)); +#552580 = FILL_AREA_STYLE_COLOUR('',#546242); +#552581 = OVER_RIDING_STYLED_ITEM('overriding color',(#552582),#134780, + #551300); +#552582 = PRESENTATION_STYLE_ASSIGNMENT((#552583)); +#552583 = SURFACE_STYLE_USAGE(.BOTH.,#552584); +#552584 = SURFACE_SIDE_STYLE('',(#552585)); +#552585 = SURFACE_STYLE_FILL_AREA(#552586); +#552586 = FILL_AREA_STYLE('',(#552587)); +#552587 = FILL_AREA_STYLE_COLOUR('',#546242); +#552588 = OVER_RIDING_STYLED_ITEM('overriding color',(#552589),#134797, + #551300); +#552589 = PRESENTATION_STYLE_ASSIGNMENT((#552590)); +#552590 = SURFACE_STYLE_USAGE(.BOTH.,#552591); +#552591 = SURFACE_SIDE_STYLE('',(#552592)); +#552592 = SURFACE_STYLE_FILL_AREA(#552593); +#552593 = FILL_AREA_STYLE('',(#552594)); +#552594 = FILL_AREA_STYLE_COLOUR('',#546242); +#552595 = OVER_RIDING_STYLED_ITEM('overriding color',(#552596),#134814, + #551300); +#552596 = PRESENTATION_STYLE_ASSIGNMENT((#552597)); +#552597 = SURFACE_STYLE_USAGE(.BOTH.,#552598); +#552598 = SURFACE_SIDE_STYLE('',(#552599)); +#552599 = SURFACE_STYLE_FILL_AREA(#552600); +#552600 = FILL_AREA_STYLE('',(#552601)); +#552601 = FILL_AREA_STYLE_COLOUR('',#546242); +#552602 = OVER_RIDING_STYLED_ITEM('overriding color',(#552603),#134831, + #551300); +#552603 = PRESENTATION_STYLE_ASSIGNMENT((#552604)); +#552604 = SURFACE_STYLE_USAGE(.BOTH.,#552605); +#552605 = SURFACE_SIDE_STYLE('',(#552606)); +#552606 = SURFACE_STYLE_FILL_AREA(#552607); +#552607 = FILL_AREA_STYLE('',(#552608)); +#552608 = FILL_AREA_STYLE_COLOUR('',#546242); +#552609 = OVER_RIDING_STYLED_ITEM('overriding color',(#552610),#134848, + #551300); +#552610 = PRESENTATION_STYLE_ASSIGNMENT((#552611)); +#552611 = SURFACE_STYLE_USAGE(.BOTH.,#552612); +#552612 = SURFACE_SIDE_STYLE('',(#552613)); +#552613 = SURFACE_STYLE_FILL_AREA(#552614); +#552614 = FILL_AREA_STYLE('',(#552615)); +#552615 = FILL_AREA_STYLE_COLOUR('',#546242); +#552616 = OVER_RIDING_STYLED_ITEM('overriding color',(#552617),#134865, + #551300); +#552617 = PRESENTATION_STYLE_ASSIGNMENT((#552618)); +#552618 = SURFACE_STYLE_USAGE(.BOTH.,#552619); +#552619 = SURFACE_SIDE_STYLE('',(#552620)); +#552620 = SURFACE_STYLE_FILL_AREA(#552621); +#552621 = FILL_AREA_STYLE('',(#552622)); +#552622 = FILL_AREA_STYLE_COLOUR('',#546242); +#552623 = OVER_RIDING_STYLED_ITEM('overriding color',(#552624),#134882, + #551300); +#552624 = PRESENTATION_STYLE_ASSIGNMENT((#552625)); +#552625 = SURFACE_STYLE_USAGE(.BOTH.,#552626); +#552626 = SURFACE_SIDE_STYLE('',(#552627)); +#552627 = SURFACE_STYLE_FILL_AREA(#552628); +#552628 = FILL_AREA_STYLE('',(#552629)); +#552629 = FILL_AREA_STYLE_COLOUR('',#546242); +#552630 = OVER_RIDING_STYLED_ITEM('overriding color',(#552631),#134894, + #551300); +#552631 = PRESENTATION_STYLE_ASSIGNMENT((#552632)); +#552632 = SURFACE_STYLE_USAGE(.BOTH.,#552633); +#552633 = SURFACE_SIDE_STYLE('',(#552634)); +#552634 = SURFACE_STYLE_FILL_AREA(#552635); +#552635 = FILL_AREA_STYLE('',(#552636)); +#552636 = FILL_AREA_STYLE_COLOUR('',#546242); +#552637 = OVER_RIDING_STYLED_ITEM('overriding color',(#552638),#134916, + #551300); +#552638 = PRESENTATION_STYLE_ASSIGNMENT((#552639)); +#552639 = SURFACE_STYLE_USAGE(.BOTH.,#552640); +#552640 = SURFACE_SIDE_STYLE('',(#552641)); +#552641 = SURFACE_STYLE_FILL_AREA(#552642); +#552642 = FILL_AREA_STYLE('',(#552643)); +#552643 = FILL_AREA_STYLE_COLOUR('',#546242); +#552644 = OVER_RIDING_STYLED_ITEM('overriding color',(#552645),#134933, + #551300); +#552645 = PRESENTATION_STYLE_ASSIGNMENT((#552646)); +#552646 = SURFACE_STYLE_USAGE(.BOTH.,#552647); +#552647 = SURFACE_SIDE_STYLE('',(#552648)); +#552648 = SURFACE_STYLE_FILL_AREA(#552649); +#552649 = FILL_AREA_STYLE('',(#552650)); +#552650 = FILL_AREA_STYLE_COLOUR('',#546242); +#552651 = OVER_RIDING_STYLED_ITEM('overriding color',(#552652),#134950, + #551300); +#552652 = PRESENTATION_STYLE_ASSIGNMENT((#552653)); +#552653 = SURFACE_STYLE_USAGE(.BOTH.,#552654); +#552654 = SURFACE_SIDE_STYLE('',(#552655)); +#552655 = SURFACE_STYLE_FILL_AREA(#552656); +#552656 = FILL_AREA_STYLE('',(#552657)); +#552657 = FILL_AREA_STYLE_COLOUR('',#546242); +#552658 = OVER_RIDING_STYLED_ITEM('overriding color',(#552659),#134967, + #551300); +#552659 = PRESENTATION_STYLE_ASSIGNMENT((#552660)); +#552660 = SURFACE_STYLE_USAGE(.BOTH.,#552661); +#552661 = SURFACE_SIDE_STYLE('',(#552662)); +#552662 = SURFACE_STYLE_FILL_AREA(#552663); +#552663 = FILL_AREA_STYLE('',(#552664)); +#552664 = FILL_AREA_STYLE_COLOUR('',#546242); +#552665 = OVER_RIDING_STYLED_ITEM('overriding color',(#552666),#134984, + #551300); +#552666 = PRESENTATION_STYLE_ASSIGNMENT((#552667)); +#552667 = SURFACE_STYLE_USAGE(.BOTH.,#552668); +#552668 = SURFACE_SIDE_STYLE('',(#552669)); +#552669 = SURFACE_STYLE_FILL_AREA(#552670); +#552670 = FILL_AREA_STYLE('',(#552671)); +#552671 = FILL_AREA_STYLE_COLOUR('',#546242); +#552672 = OVER_RIDING_STYLED_ITEM('overriding color',(#552673),#135001, + #551300); +#552673 = PRESENTATION_STYLE_ASSIGNMENT((#552674)); +#552674 = SURFACE_STYLE_USAGE(.BOTH.,#552675); +#552675 = SURFACE_SIDE_STYLE('',(#552676)); +#552676 = SURFACE_STYLE_FILL_AREA(#552677); +#552677 = FILL_AREA_STYLE('',(#552678)); +#552678 = FILL_AREA_STYLE_COLOUR('',#546242); +#552679 = OVER_RIDING_STYLED_ITEM('overriding color',(#552680),#135018, + #551300); +#552680 = PRESENTATION_STYLE_ASSIGNMENT((#552681)); +#552681 = SURFACE_STYLE_USAGE(.BOTH.,#552682); +#552682 = SURFACE_SIDE_STYLE('',(#552683)); +#552683 = SURFACE_STYLE_FILL_AREA(#552684); +#552684 = FILL_AREA_STYLE('',(#552685)); +#552685 = FILL_AREA_STYLE_COLOUR('',#546242); +#552686 = OVER_RIDING_STYLED_ITEM('overriding color',(#552687),#135035, + #551300); +#552687 = PRESENTATION_STYLE_ASSIGNMENT((#552688)); +#552688 = SURFACE_STYLE_USAGE(.BOTH.,#552689); +#552689 = SURFACE_SIDE_STYLE('',(#552690)); +#552690 = SURFACE_STYLE_FILL_AREA(#552691); +#552691 = FILL_AREA_STYLE('',(#552692)); +#552692 = FILL_AREA_STYLE_COLOUR('',#546242); +#552693 = OVER_RIDING_STYLED_ITEM('overriding color',(#552694),#135052, + #551300); +#552694 = PRESENTATION_STYLE_ASSIGNMENT((#552695)); +#552695 = SURFACE_STYLE_USAGE(.BOTH.,#552696); +#552696 = SURFACE_SIDE_STYLE('',(#552697)); +#552697 = SURFACE_STYLE_FILL_AREA(#552698); +#552698 = FILL_AREA_STYLE('',(#552699)); +#552699 = FILL_AREA_STYLE_COLOUR('',#546242); +#552700 = OVER_RIDING_STYLED_ITEM('overriding color',(#552701),#135064, + #551300); +#552701 = PRESENTATION_STYLE_ASSIGNMENT((#552702)); +#552702 = SURFACE_STYLE_USAGE(.BOTH.,#552703); +#552703 = SURFACE_SIDE_STYLE('',(#552704)); +#552704 = SURFACE_STYLE_FILL_AREA(#552705); +#552705 = FILL_AREA_STYLE('',(#552706)); +#552706 = FILL_AREA_STYLE_COLOUR('',#546242); +#552707 = OVER_RIDING_STYLED_ITEM('overriding color',(#552708),#135086, + #551300); +#552708 = PRESENTATION_STYLE_ASSIGNMENT((#552709)); +#552709 = SURFACE_STYLE_USAGE(.BOTH.,#552710); +#552710 = SURFACE_SIDE_STYLE('',(#552711)); +#552711 = SURFACE_STYLE_FILL_AREA(#552712); +#552712 = FILL_AREA_STYLE('',(#552713)); +#552713 = FILL_AREA_STYLE_COLOUR('',#546242); +#552714 = OVER_RIDING_STYLED_ITEM('overriding color',(#552715),#135103, + #551300); +#552715 = PRESENTATION_STYLE_ASSIGNMENT((#552716)); +#552716 = SURFACE_STYLE_USAGE(.BOTH.,#552717); +#552717 = SURFACE_SIDE_STYLE('',(#552718)); +#552718 = SURFACE_STYLE_FILL_AREA(#552719); +#552719 = FILL_AREA_STYLE('',(#552720)); +#552720 = FILL_AREA_STYLE_COLOUR('',#546242); +#552721 = OVER_RIDING_STYLED_ITEM('overriding color',(#552722),#135120, + #551300); +#552722 = PRESENTATION_STYLE_ASSIGNMENT((#552723)); +#552723 = SURFACE_STYLE_USAGE(.BOTH.,#552724); +#552724 = SURFACE_SIDE_STYLE('',(#552725)); +#552725 = SURFACE_STYLE_FILL_AREA(#552726); +#552726 = FILL_AREA_STYLE('',(#552727)); +#552727 = FILL_AREA_STYLE_COLOUR('',#546242); +#552728 = OVER_RIDING_STYLED_ITEM('overriding color',(#552729),#135137, + #551300); +#552729 = PRESENTATION_STYLE_ASSIGNMENT((#552730)); +#552730 = SURFACE_STYLE_USAGE(.BOTH.,#552731); +#552731 = SURFACE_SIDE_STYLE('',(#552732)); +#552732 = SURFACE_STYLE_FILL_AREA(#552733); +#552733 = FILL_AREA_STYLE('',(#552734)); +#552734 = FILL_AREA_STYLE_COLOUR('',#546242); +#552735 = OVER_RIDING_STYLED_ITEM('overriding color',(#552736),#135154, + #551300); +#552736 = PRESENTATION_STYLE_ASSIGNMENT((#552737)); +#552737 = SURFACE_STYLE_USAGE(.BOTH.,#552738); +#552738 = SURFACE_SIDE_STYLE('',(#552739)); +#552739 = SURFACE_STYLE_FILL_AREA(#552740); +#552740 = FILL_AREA_STYLE('',(#552741)); +#552741 = FILL_AREA_STYLE_COLOUR('',#546242); +#552742 = OVER_RIDING_STYLED_ITEM('overriding color',(#552743),#135171, + #551300); +#552743 = PRESENTATION_STYLE_ASSIGNMENT((#552744)); +#552744 = SURFACE_STYLE_USAGE(.BOTH.,#552745); +#552745 = SURFACE_SIDE_STYLE('',(#552746)); +#552746 = SURFACE_STYLE_FILL_AREA(#552747); +#552747 = FILL_AREA_STYLE('',(#552748)); +#552748 = FILL_AREA_STYLE_COLOUR('',#546242); +#552749 = OVER_RIDING_STYLED_ITEM('overriding color',(#552750),#135188, + #551300); +#552750 = PRESENTATION_STYLE_ASSIGNMENT((#552751)); +#552751 = SURFACE_STYLE_USAGE(.BOTH.,#552752); +#552752 = SURFACE_SIDE_STYLE('',(#552753)); +#552753 = SURFACE_STYLE_FILL_AREA(#552754); +#552754 = FILL_AREA_STYLE('',(#552755)); +#552755 = FILL_AREA_STYLE_COLOUR('',#546242); +#552756 = OVER_RIDING_STYLED_ITEM('overriding color',(#552757),#135205, + #551300); +#552757 = PRESENTATION_STYLE_ASSIGNMENT((#552758)); +#552758 = SURFACE_STYLE_USAGE(.BOTH.,#552759); +#552759 = SURFACE_SIDE_STYLE('',(#552760)); +#552760 = SURFACE_STYLE_FILL_AREA(#552761); +#552761 = FILL_AREA_STYLE('',(#552762)); +#552762 = FILL_AREA_STYLE_COLOUR('',#546242); +#552763 = OVER_RIDING_STYLED_ITEM('overriding color',(#552764),#135222, + #551300); +#552764 = PRESENTATION_STYLE_ASSIGNMENT((#552765)); +#552765 = SURFACE_STYLE_USAGE(.BOTH.,#552766); +#552766 = SURFACE_SIDE_STYLE('',(#552767)); +#552767 = SURFACE_STYLE_FILL_AREA(#552768); +#552768 = FILL_AREA_STYLE('',(#552769)); +#552769 = FILL_AREA_STYLE_COLOUR('',#546242); +#552770 = OVER_RIDING_STYLED_ITEM('overriding color',(#552771),#135234, + #551300); +#552771 = PRESENTATION_STYLE_ASSIGNMENT((#552772)); +#552772 = SURFACE_STYLE_USAGE(.BOTH.,#552773); +#552773 = SURFACE_SIDE_STYLE('',(#552774)); +#552774 = SURFACE_STYLE_FILL_AREA(#552775); +#552775 = FILL_AREA_STYLE('',(#552776)); +#552776 = FILL_AREA_STYLE_COLOUR('',#510377); +#552777 = OVER_RIDING_STYLED_ITEM('overriding color',(#552778),#135266, + #551300); +#552778 = PRESENTATION_STYLE_ASSIGNMENT((#552779)); +#552779 = SURFACE_STYLE_USAGE(.BOTH.,#552780); +#552780 = SURFACE_SIDE_STYLE('',(#552781)); +#552781 = SURFACE_STYLE_FILL_AREA(#552782); +#552782 = FILL_AREA_STYLE('',(#552783)); +#552783 = FILL_AREA_STYLE_COLOUR('',#510377); +#552784 = OVER_RIDING_STYLED_ITEM('overriding color',(#552785),#135284, + #551300); +#552785 = PRESENTATION_STYLE_ASSIGNMENT((#552786)); +#552786 = SURFACE_STYLE_USAGE(.BOTH.,#552787); +#552787 = SURFACE_SIDE_STYLE('',(#552788)); +#552788 = SURFACE_STYLE_FILL_AREA(#552789); +#552789 = FILL_AREA_STYLE('',(#552790)); +#552790 = FILL_AREA_STYLE_COLOUR('',#549912); +#552791 = OVER_RIDING_STYLED_ITEM('overriding color',(#552792),#135314, + #551300); +#552792 = PRESENTATION_STYLE_ASSIGNMENT((#552793)); +#552793 = SURFACE_STYLE_USAGE(.BOTH.,#552794); +#552794 = SURFACE_SIDE_STYLE('',(#552795)); +#552795 = SURFACE_STYLE_FILL_AREA(#552796); +#552796 = FILL_AREA_STYLE('',(#552797)); +#552797 = FILL_AREA_STYLE_COLOUR('',#551103); +#552798 = OVER_RIDING_STYLED_ITEM('overriding color',(#552799),#135346, + #551300); +#552799 = PRESENTATION_STYLE_ASSIGNMENT((#552800)); +#552800 = SURFACE_STYLE_USAGE(.BOTH.,#552801); +#552801 = SURFACE_SIDE_STYLE('',(#552802)); +#552802 = SURFACE_STYLE_FILL_AREA(#552803); +#552803 = FILL_AREA_STYLE('',(#552804)); +#552804 = FILL_AREA_STYLE_COLOUR('',#551103); +#552805 = OVER_RIDING_STYLED_ITEM('overriding color',(#552806),#135364, + #551300); +#552806 = PRESENTATION_STYLE_ASSIGNMENT((#552807)); +#552807 = SURFACE_STYLE_USAGE(.BOTH.,#552808); +#552808 = SURFACE_SIDE_STYLE('',(#552809)); +#552809 = SURFACE_STYLE_FILL_AREA(#552810); +#552810 = FILL_AREA_STYLE('',(#552811)); +#552811 = FILL_AREA_STYLE_COLOUR('',#551103); +#552812 = OVER_RIDING_STYLED_ITEM('overriding color',(#552813),#135440, + #551300); +#552813 = PRESENTATION_STYLE_ASSIGNMENT((#552814)); +#552814 = SURFACE_STYLE_USAGE(.BOTH.,#552815); +#552815 = SURFACE_SIDE_STYLE('',(#552816)); +#552816 = SURFACE_STYLE_FILL_AREA(#552817); +#552817 = FILL_AREA_STYLE('',(#552818)); +#552818 = FILL_AREA_STYLE_COLOUR('',#551103); +#552819 = OVER_RIDING_STYLED_ITEM('overriding color',(#552820),#135471, + #551300); +#552820 = PRESENTATION_STYLE_ASSIGNMENT((#552821)); +#552821 = SURFACE_STYLE_USAGE(.BOTH.,#552822); +#552822 = SURFACE_SIDE_STYLE('',(#552823)); +#552823 = SURFACE_STYLE_FILL_AREA(#552824); +#552824 = FILL_AREA_STYLE('',(#552825)); +#552825 = FILL_AREA_STYLE_COLOUR('',#551103); +#552826 = OVER_RIDING_STYLED_ITEM('overriding color',(#552827),#135516, + #551300); +#552827 = PRESENTATION_STYLE_ASSIGNMENT((#552828)); +#552828 = SURFACE_STYLE_USAGE(.BOTH.,#552829); +#552829 = SURFACE_SIDE_STYLE('',(#552830)); +#552830 = SURFACE_STYLE_FILL_AREA(#552831); +#552831 = FILL_AREA_STYLE('',(#552832)); +#552832 = FILL_AREA_STYLE_COLOUR('',#551103); +#552833 = OVER_RIDING_STYLED_ITEM('overriding color',(#552834),#135548, + #551300); +#552834 = PRESENTATION_STYLE_ASSIGNMENT((#552835)); +#552835 = SURFACE_STYLE_USAGE(.BOTH.,#552836); +#552836 = SURFACE_SIDE_STYLE('',(#552837)); +#552837 = SURFACE_STYLE_FILL_AREA(#552838); +#552838 = FILL_AREA_STYLE('',(#552839)); +#552839 = FILL_AREA_STYLE_COLOUR('',#551103); +#552840 = OVER_RIDING_STYLED_ITEM('overriding color',(#552841),#135588, + #551300); +#552841 = PRESENTATION_STYLE_ASSIGNMENT((#552842)); +#552842 = SURFACE_STYLE_USAGE(.BOTH.,#552843); +#552843 = SURFACE_SIDE_STYLE('',(#552844)); +#552844 = SURFACE_STYLE_FILL_AREA(#552845); +#552845 = FILL_AREA_STYLE('',(#552846)); +#552846 = FILL_AREA_STYLE_COLOUR('',#551103); +#552847 = OVER_RIDING_STYLED_ITEM('overriding color',(#552848),#135612, + #551300); +#552848 = PRESENTATION_STYLE_ASSIGNMENT((#552849)); +#552849 = SURFACE_STYLE_USAGE(.BOTH.,#552850); +#552850 = SURFACE_SIDE_STYLE('',(#552851)); +#552851 = SURFACE_STYLE_FILL_AREA(#552852); +#552852 = FILL_AREA_STYLE('',(#552853)); +#552853 = FILL_AREA_STYLE_COLOUR('',#551103); +#552854 = OVER_RIDING_STYLED_ITEM('overriding color',(#552855),#135643, + #551300); +#552855 = PRESENTATION_STYLE_ASSIGNMENT((#552856)); +#552856 = SURFACE_STYLE_USAGE(.BOTH.,#552857); +#552857 = SURFACE_SIDE_STYLE('',(#552858)); +#552858 = SURFACE_STYLE_FILL_AREA(#552859); +#552859 = FILL_AREA_STYLE('',(#552860)); +#552860 = FILL_AREA_STYLE_COLOUR('',#551103); +#552861 = OVER_RIDING_STYLED_ITEM('overriding color',(#552862),#135666, + #551300); +#552862 = PRESENTATION_STYLE_ASSIGNMENT((#552863)); +#552863 = SURFACE_STYLE_USAGE(.BOTH.,#552864); +#552864 = SURFACE_SIDE_STYLE('',(#552865)); +#552865 = SURFACE_STYLE_FILL_AREA(#552866); +#552866 = FILL_AREA_STYLE('',(#552867)); +#552867 = FILL_AREA_STYLE_COLOUR('',#551103); +#552868 = OVER_RIDING_STYLED_ITEM('overriding color',(#552869),#135683, + #551300); +#552869 = PRESENTATION_STYLE_ASSIGNMENT((#552870)); +#552870 = SURFACE_STYLE_USAGE(.BOTH.,#552871); +#552871 = SURFACE_SIDE_STYLE('',(#552872)); +#552872 = SURFACE_STYLE_FILL_AREA(#552873); +#552873 = FILL_AREA_STYLE('',(#552874)); +#552874 = FILL_AREA_STYLE_COLOUR('',#551103); +#552875 = OVER_RIDING_STYLED_ITEM('overriding color',(#552876),#135701, + #551300); +#552876 = PRESENTATION_STYLE_ASSIGNMENT((#552877)); +#552877 = SURFACE_STYLE_USAGE(.BOTH.,#552878); +#552878 = SURFACE_SIDE_STYLE('',(#552879)); +#552879 = SURFACE_STYLE_FILL_AREA(#552880); +#552880 = FILL_AREA_STYLE('',(#552881)); +#552881 = FILL_AREA_STYLE_COLOUR('',#551103); +#552882 = OVER_RIDING_STYLED_ITEM('overriding color',(#552883),#135727, + #551300); +#552883 = PRESENTATION_STYLE_ASSIGNMENT((#552884)); +#552884 = SURFACE_STYLE_USAGE(.BOTH.,#552885); +#552885 = SURFACE_SIDE_STYLE('',(#552886)); +#552886 = SURFACE_STYLE_FILL_AREA(#552887); +#552887 = FILL_AREA_STYLE('',(#552888)); +#552888 = FILL_AREA_STYLE_COLOUR('',#551103); +#552889 = OVER_RIDING_STYLED_ITEM('overriding color',(#552890),#135744, + #551300); +#552890 = PRESENTATION_STYLE_ASSIGNMENT((#552891)); +#552891 = SURFACE_STYLE_USAGE(.BOTH.,#552892); +#552892 = SURFACE_SIDE_STYLE('',(#552893)); +#552893 = SURFACE_STYLE_FILL_AREA(#552894); +#552894 = FILL_AREA_STYLE('',(#552895)); +#552895 = FILL_AREA_STYLE_COLOUR('',#551103); +#552896 = OVER_RIDING_STYLED_ITEM('overriding color',(#552897),#135756, + #551300); +#552897 = PRESENTATION_STYLE_ASSIGNMENT((#552898)); +#552898 = SURFACE_STYLE_USAGE(.BOTH.,#552899); +#552899 = SURFACE_SIDE_STYLE('',(#552900)); +#552900 = SURFACE_STYLE_FILL_AREA(#552901); +#552901 = FILL_AREA_STYLE('',(#552902)); +#552902 = FILL_AREA_STYLE_COLOUR('',#551103); +#552903 = OVER_RIDING_STYLED_ITEM('overriding color',(#552904),#135780, + #551300); +#552904 = PRESENTATION_STYLE_ASSIGNMENT((#552905)); +#552905 = SURFACE_STYLE_USAGE(.BOTH.,#552906); +#552906 = SURFACE_SIDE_STYLE('',(#552907)); +#552907 = SURFACE_STYLE_FILL_AREA(#552908); +#552908 = FILL_AREA_STYLE('',(#552909)); +#552909 = FILL_AREA_STYLE_COLOUR('',#551103); +#552910 = OVER_RIDING_STYLED_ITEM('overriding color',(#552911),#135798, + #551300); +#552911 = PRESENTATION_STYLE_ASSIGNMENT((#552912)); +#552912 = SURFACE_STYLE_USAGE(.BOTH.,#552913); +#552913 = SURFACE_SIDE_STYLE('',(#552914)); +#552914 = SURFACE_STYLE_FILL_AREA(#552915); +#552915 = FILL_AREA_STYLE('',(#552916)); +#552916 = FILL_AREA_STYLE_COLOUR('',#551103); +#552917 = OVER_RIDING_STYLED_ITEM('overriding color',(#552918),#135810, + #551300); +#552918 = PRESENTATION_STYLE_ASSIGNMENT((#552919)); +#552919 = SURFACE_STYLE_USAGE(.BOTH.,#552920); +#552920 = SURFACE_SIDE_STYLE('',(#552921)); +#552921 = SURFACE_STYLE_FILL_AREA(#552922); +#552922 = FILL_AREA_STYLE('',(#552923)); +#552923 = FILL_AREA_STYLE_COLOUR('',#510377); +#552924 = OVER_RIDING_STYLED_ITEM('overriding color',(#552925),#135876, + #551300); +#552925 = PRESENTATION_STYLE_ASSIGNMENT((#552926)); +#552926 = SURFACE_STYLE_USAGE(.BOTH.,#552927); +#552927 = SURFACE_SIDE_STYLE('',(#552928)); +#552928 = SURFACE_STYLE_FILL_AREA(#552929); +#552929 = FILL_AREA_STYLE('',(#552930)); +#552930 = FILL_AREA_STYLE_COLOUR('',#510377); +#552931 = OVER_RIDING_STYLED_ITEM('overriding color',(#552932),#135900, + #551300); +#552932 = PRESENTATION_STYLE_ASSIGNMENT((#552933)); +#552933 = SURFACE_STYLE_USAGE(.BOTH.,#552934); +#552934 = SURFACE_SIDE_STYLE('',(#552935)); +#552935 = SURFACE_STYLE_FILL_AREA(#552936); +#552936 = FILL_AREA_STYLE('',(#552937)); +#552937 = FILL_AREA_STYLE_COLOUR('',#510377); +#552938 = OVER_RIDING_STYLED_ITEM('overriding color',(#552939),#135924, + #551300); +#552939 = PRESENTATION_STYLE_ASSIGNMENT((#552940)); +#552940 = SURFACE_STYLE_USAGE(.BOTH.,#552941); +#552941 = SURFACE_SIDE_STYLE('',(#552942)); +#552942 = SURFACE_STYLE_FILL_AREA(#552943); +#552943 = FILL_AREA_STYLE('',(#552944)); +#552944 = FILL_AREA_STYLE_COLOUR('',#510377); +#552945 = OVER_RIDING_STYLED_ITEM('overriding color',(#552946),#135955, + #551300); +#552946 = PRESENTATION_STYLE_ASSIGNMENT((#552947)); +#552947 = SURFACE_STYLE_USAGE(.BOTH.,#552948); +#552948 = SURFACE_SIDE_STYLE('',(#552949)); +#552949 = SURFACE_STYLE_FILL_AREA(#552950); +#552950 = FILL_AREA_STYLE('',(#552951)); +#552951 = FILL_AREA_STYLE_COLOUR('',#510377); +#552952 = OVER_RIDING_STYLED_ITEM('overriding color',(#552953),#135972, + #551300); +#552953 = PRESENTATION_STYLE_ASSIGNMENT((#552954)); +#552954 = SURFACE_STYLE_USAGE(.BOTH.,#552955); +#552955 = SURFACE_SIDE_STYLE('',(#552956)); +#552956 = SURFACE_STYLE_FILL_AREA(#552957); +#552957 = FILL_AREA_STYLE('',(#552958)); +#552958 = FILL_AREA_STYLE_COLOUR('',#510377); +#552959 = OVER_RIDING_STYLED_ITEM('overriding color',(#552960),#135984, + #551300); +#552960 = PRESENTATION_STYLE_ASSIGNMENT((#552961)); +#552961 = SURFACE_STYLE_USAGE(.BOTH.,#552962); +#552962 = SURFACE_SIDE_STYLE('',(#552963)); +#552963 = SURFACE_STYLE_FILL_AREA(#552964); +#552964 = FILL_AREA_STYLE('',(#552965)); +#552965 = FILL_AREA_STYLE_COLOUR('',#510377); +#552966 = OVER_RIDING_STYLED_ITEM('overriding color',(#552967),#136001, + #551300); +#552967 = PRESENTATION_STYLE_ASSIGNMENT((#552968)); +#552968 = SURFACE_STYLE_USAGE(.BOTH.,#552969); +#552969 = SURFACE_SIDE_STYLE('',(#552970)); +#552970 = SURFACE_STYLE_FILL_AREA(#552971); +#552971 = FILL_AREA_STYLE('',(#552972)); +#552972 = FILL_AREA_STYLE_COLOUR('',#510377); +#552973 = OVER_RIDING_STYLED_ITEM('overriding color',(#552974),#136018, + #551300); +#552974 = PRESENTATION_STYLE_ASSIGNMENT((#552975)); +#552975 = SURFACE_STYLE_USAGE(.BOTH.,#552976); +#552976 = SURFACE_SIDE_STYLE('',(#552977)); +#552977 = SURFACE_STYLE_FILL_AREA(#552978); +#552978 = FILL_AREA_STYLE('',(#552979)); +#552979 = FILL_AREA_STYLE_COLOUR('',#510377); +#552980 = OVER_RIDING_STYLED_ITEM('overriding color',(#552981),#136030, + #551300); +#552981 = PRESENTATION_STYLE_ASSIGNMENT((#552982)); +#552982 = SURFACE_STYLE_USAGE(.BOTH.,#552983); +#552983 = SURFACE_SIDE_STYLE('',(#552984)); +#552984 = SURFACE_STYLE_FILL_AREA(#552985); +#552985 = FILL_AREA_STYLE('',(#552986)); +#552986 = FILL_AREA_STYLE_COLOUR('',#510377); +#552987 = OVER_RIDING_STYLED_ITEM('overriding color',(#552988),#136047, + #551300); +#552988 = PRESENTATION_STYLE_ASSIGNMENT((#552989)); +#552989 = SURFACE_STYLE_USAGE(.BOTH.,#552990); +#552990 = SURFACE_SIDE_STYLE('',(#552991)); +#552991 = SURFACE_STYLE_FILL_AREA(#552992); +#552992 = FILL_AREA_STYLE('',(#552993)); +#552993 = FILL_AREA_STYLE_COLOUR('',#510377); +#552994 = STYLED_ITEM('color',(#552995),#136059); +#552995 = PRESENTATION_STYLE_ASSIGNMENT((#552996)); +#552996 = SURFACE_STYLE_USAGE(.BOTH.,#552997); +#552997 = SURFACE_SIDE_STYLE('',(#552998)); +#552998 = SURFACE_STYLE_FILL_AREA(#552999); +#552999 = FILL_AREA_STYLE('',(#553000)); +#553000 = FILL_AREA_STYLE_COLOUR('',#521053); +#553001 = OVER_RIDING_STYLED_ITEM('overriding color',(#553002),#136061, + #552994); +#553002 = PRESENTATION_STYLE_ASSIGNMENT((#553003)); +#553003 = SURFACE_STYLE_USAGE(.BOTH.,#553004); +#553004 = SURFACE_SIDE_STYLE('',(#553005)); +#553005 = SURFACE_STYLE_FILL_AREA(#553006); +#553006 = FILL_AREA_STYLE('',(#553007)); +#553007 = FILL_AREA_STYLE_COLOUR('',#551103); +#553008 = OVER_RIDING_STYLED_ITEM('overriding color',(#553009),#136103, + #552994); +#553009 = PRESENTATION_STYLE_ASSIGNMENT((#553010)); +#553010 = SURFACE_STYLE_USAGE(.BOTH.,#553011); +#553011 = SURFACE_SIDE_STYLE('',(#553012)); +#553012 = SURFACE_STYLE_FILL_AREA(#553013); +#553013 = FILL_AREA_STYLE('',(#553014)); +#553014 = FILL_AREA_STYLE_COLOUR('',#551103); +#553015 = OVER_RIDING_STYLED_ITEM('overriding color',(#553016),#136136, + #552994); +#553016 = PRESENTATION_STYLE_ASSIGNMENT((#553017)); +#553017 = SURFACE_STYLE_USAGE(.BOTH.,#553018); +#553018 = SURFACE_SIDE_STYLE('',(#553019)); +#553019 = SURFACE_STYLE_FILL_AREA(#553020); +#553020 = FILL_AREA_STYLE('',(#553021)); +#553021 = FILL_AREA_STYLE_COLOUR('',#553022); +#553022 = COLOUR_RGB('',0.843137261657,0.815686284108,0.752941164258); +#553023 = OVER_RIDING_STYLED_ITEM('overriding color',(#553024),#136215, + #552994); +#553024 = PRESENTATION_STYLE_ASSIGNMENT((#553025)); +#553025 = SURFACE_STYLE_USAGE(.BOTH.,#553026); +#553026 = SURFACE_SIDE_STYLE('',(#553027)); +#553027 = SURFACE_STYLE_FILL_AREA(#553028); +#553028 = FILL_AREA_STYLE('',(#553029)); +#553029 = FILL_AREA_STYLE_COLOUR('',#553022); +#553030 = OVER_RIDING_STYLED_ITEM('overriding color',(#553031),#136248, + #552994); +#553031 = PRESENTATION_STYLE_ASSIGNMENT((#553032)); +#553032 = SURFACE_STYLE_USAGE(.BOTH.,#553033); +#553033 = SURFACE_SIDE_STYLE('',(#553034)); +#553034 = SURFACE_STYLE_FILL_AREA(#553035); +#553035 = FILL_AREA_STYLE('',(#553036)); +#553036 = FILL_AREA_STYLE_COLOUR('',#553022); +#553037 = OVER_RIDING_STYLED_ITEM('overriding color',(#553038),#136292, + #552994); +#553038 = PRESENTATION_STYLE_ASSIGNMENT((#553039)); +#553039 = SURFACE_STYLE_USAGE(.BOTH.,#553040); +#553040 = SURFACE_SIDE_STYLE('',(#553041)); +#553041 = SURFACE_STYLE_FILL_AREA(#553042); +#553042 = FILL_AREA_STYLE('',(#553043)); +#553043 = FILL_AREA_STYLE_COLOUR('',#553022); +#553044 = OVER_RIDING_STYLED_ITEM('overriding color',(#553045),#136328, + #552994); +#553045 = PRESENTATION_STYLE_ASSIGNMENT((#553046)); +#553046 = SURFACE_STYLE_USAGE(.BOTH.,#553047); +#553047 = SURFACE_SIDE_STYLE('',(#553048)); +#553048 = SURFACE_STYLE_FILL_AREA(#553049); +#553049 = FILL_AREA_STYLE('',(#553050)); +#553050 = FILL_AREA_STYLE_COLOUR('',#551103); +#553051 = OVER_RIDING_STYLED_ITEM('overriding color',(#553052),#136370, + #552994); +#553052 = PRESENTATION_STYLE_ASSIGNMENT((#553053)); +#553053 = SURFACE_STYLE_USAGE(.BOTH.,#553054); +#553054 = SURFACE_SIDE_STYLE('',(#553055)); +#553055 = SURFACE_STYLE_FILL_AREA(#553056); +#553056 = FILL_AREA_STYLE('',(#553057)); +#553057 = FILL_AREA_STYLE_COLOUR('',#551103); +#553058 = OVER_RIDING_STYLED_ITEM('overriding color',(#553059),#136462, + #552994); +#553059 = PRESENTATION_STYLE_ASSIGNMENT((#553060)); +#553060 = SURFACE_STYLE_USAGE(.BOTH.,#553061); +#553061 = SURFACE_SIDE_STYLE('',(#553062)); +#553062 = SURFACE_STYLE_FILL_AREA(#553063); +#553063 = FILL_AREA_STYLE('',(#553064)); +#553064 = FILL_AREA_STYLE_COLOUR('',#551103); +#553065 = OVER_RIDING_STYLED_ITEM('overriding color',(#553066),#136495, + #552994); +#553066 = PRESENTATION_STYLE_ASSIGNMENT((#553067)); +#553067 = SURFACE_STYLE_USAGE(.BOTH.,#553068); +#553068 = SURFACE_SIDE_STYLE('',(#553069)); +#553069 = SURFACE_STYLE_FILL_AREA(#553070); +#553070 = FILL_AREA_STYLE('',(#553071)); +#553071 = FILL_AREA_STYLE_COLOUR('',#521053); +#553072 = OVER_RIDING_STYLED_ITEM('overriding color',(#553073),#136551, + #552994); +#553073 = PRESENTATION_STYLE_ASSIGNMENT((#553074)); +#553074 = SURFACE_STYLE_USAGE(.BOTH.,#553075); +#553075 = SURFACE_SIDE_STYLE('',(#553076)); +#553076 = SURFACE_STYLE_FILL_AREA(#553077); +#553077 = FILL_AREA_STYLE('',(#553078)); +#553078 = FILL_AREA_STYLE_COLOUR('',#521053); +#553079 = OVER_RIDING_STYLED_ITEM('overriding color',(#553080),#136879, + #552994); +#553080 = PRESENTATION_STYLE_ASSIGNMENT((#553081)); +#553081 = SURFACE_STYLE_USAGE(.BOTH.,#553082); +#553082 = SURFACE_SIDE_STYLE('',(#553083)); +#553083 = SURFACE_STYLE_FILL_AREA(#553084); +#553084 = FILL_AREA_STYLE('',(#553085)); +#553085 = FILL_AREA_STYLE_COLOUR('',#521053); +#553086 = OVER_RIDING_STYLED_ITEM('overriding color',(#553087),#136983, + #552994); +#553087 = PRESENTATION_STYLE_ASSIGNMENT((#553088)); +#553088 = SURFACE_STYLE_USAGE(.BOTH.,#553089); +#553089 = SURFACE_SIDE_STYLE('',(#553090)); +#553090 = SURFACE_STYLE_FILL_AREA(#553091); +#553091 = FILL_AREA_STYLE('',(#553092)); +#553092 = FILL_AREA_STYLE_COLOUR('',#521053); +#553093 = OVER_RIDING_STYLED_ITEM('overriding color',(#553094),#137201, + #552994); +#553094 = PRESENTATION_STYLE_ASSIGNMENT((#553095)); +#553095 = SURFACE_STYLE_USAGE(.BOTH.,#553096); +#553096 = SURFACE_SIDE_STYLE('',(#553097)); +#553097 = SURFACE_STYLE_FILL_AREA(#553098); +#553098 = FILL_AREA_STYLE('',(#553099)); +#553099 = FILL_AREA_STYLE_COLOUR('',#521053); +#553100 = OVER_RIDING_STYLED_ITEM('overriding color',(#553101),#137299, + #552994); +#553101 = PRESENTATION_STYLE_ASSIGNMENT((#553102)); +#553102 = SURFACE_STYLE_USAGE(.BOTH.,#553103); +#553103 = SURFACE_SIDE_STYLE('',(#553104)); +#553104 = SURFACE_STYLE_FILL_AREA(#553105); +#553105 = FILL_AREA_STYLE('',(#553106)); +#553106 = FILL_AREA_STYLE_COLOUR('',#521053); +#553107 = OVER_RIDING_STYLED_ITEM('overriding color',(#553108),#137330, + #552994); +#553108 = PRESENTATION_STYLE_ASSIGNMENT((#553109)); +#553109 = SURFACE_STYLE_USAGE(.BOTH.,#553110); +#553110 = SURFACE_SIDE_STYLE('',(#553111)); +#553111 = SURFACE_STYLE_FILL_AREA(#553112); +#553112 = FILL_AREA_STYLE('',(#553113)); +#553113 = FILL_AREA_STYLE_COLOUR('',#551103); +#553114 = OVER_RIDING_STYLED_ITEM('overriding color',(#553115),#138017, + #552994); +#553115 = PRESENTATION_STYLE_ASSIGNMENT((#553116)); +#553116 = SURFACE_STYLE_USAGE(.BOTH.,#553117); +#553117 = SURFACE_SIDE_STYLE('',(#553118)); +#553118 = SURFACE_STYLE_FILL_AREA(#553119); +#553119 = FILL_AREA_STYLE('',(#553120)); +#553120 = FILL_AREA_STYLE_COLOUR('',#551103); +#553121 = OVER_RIDING_STYLED_ITEM('overriding color',(#553122),#138043, + #552994); +#553122 = PRESENTATION_STYLE_ASSIGNMENT((#553123)); +#553123 = SURFACE_STYLE_USAGE(.BOTH.,#553124); +#553124 = SURFACE_SIDE_STYLE('',(#553125)); +#553125 = SURFACE_STYLE_FILL_AREA(#553126); +#553126 = FILL_AREA_STYLE('',(#553127)); +#553127 = FILL_AREA_STYLE_COLOUR('',#551103); +#553128 = OVER_RIDING_STYLED_ITEM('overriding color',(#553129),#138164, + #552994); +#553129 = PRESENTATION_STYLE_ASSIGNMENT((#553130)); +#553130 = SURFACE_STYLE_USAGE(.BOTH.,#553131); +#553131 = SURFACE_SIDE_STYLE('',(#553132)); +#553132 = SURFACE_STYLE_FILL_AREA(#553133); +#553133 = FILL_AREA_STYLE('',(#553134)); +#553134 = FILL_AREA_STYLE_COLOUR('',#551103); +#553135 = OVER_RIDING_STYLED_ITEM('overriding color',(#553136),#138269, + #552994); +#553136 = PRESENTATION_STYLE_ASSIGNMENT((#553137)); +#553137 = SURFACE_STYLE_USAGE(.BOTH.,#553138); +#553138 = SURFACE_SIDE_STYLE('',(#553139)); +#553139 = SURFACE_STYLE_FILL_AREA(#553140); +#553140 = FILL_AREA_STYLE('',(#553141)); +#553141 = FILL_AREA_STYLE_COLOUR('',#551103); +#553142 = OVER_RIDING_STYLED_ITEM('overriding color',(#553143),#138612, + #552994); +#553143 = PRESENTATION_STYLE_ASSIGNMENT((#553144)); +#553144 = SURFACE_STYLE_USAGE(.BOTH.,#553145); +#553145 = SURFACE_SIDE_STYLE('',(#553146)); +#553146 = SURFACE_STYLE_FILL_AREA(#553147); +#553147 = FILL_AREA_STYLE('',(#553148)); +#553148 = FILL_AREA_STYLE_COLOUR('',#551103); +#553149 = OVER_RIDING_STYLED_ITEM('overriding color',(#553150),#138716, + #552994); +#553150 = PRESENTATION_STYLE_ASSIGNMENT((#553151)); +#553151 = SURFACE_STYLE_USAGE(.BOTH.,#553152); +#553152 = SURFACE_SIDE_STYLE('',(#553153)); +#553153 = SURFACE_STYLE_FILL_AREA(#553154); +#553154 = FILL_AREA_STYLE('',(#553155)); +#553155 = FILL_AREA_STYLE_COLOUR('',#551103); +#553156 = OVER_RIDING_STYLED_ITEM('overriding color',(#553157),#138748, + #552994); +#553157 = PRESENTATION_STYLE_ASSIGNMENT((#553158)); +#553158 = SURFACE_STYLE_USAGE(.BOTH.,#553159); +#553159 = SURFACE_SIDE_STYLE('',(#553160)); +#553160 = SURFACE_STYLE_FILL_AREA(#553161); +#553161 = FILL_AREA_STYLE('',(#553162)); +#553162 = FILL_AREA_STYLE_COLOUR('',#551103); +#553163 = OVER_RIDING_STYLED_ITEM('overriding color',(#553164),#138780, + #552994); +#553164 = PRESENTATION_STYLE_ASSIGNMENT((#553165)); +#553165 = SURFACE_STYLE_USAGE(.BOTH.,#553166); +#553166 = SURFACE_SIDE_STYLE('',(#553167)); +#553167 = SURFACE_STYLE_FILL_AREA(#553168); +#553168 = FILL_AREA_STYLE('',(#553169)); +#553169 = FILL_AREA_STYLE_COLOUR('',#551103); +#553170 = OVER_RIDING_STYLED_ITEM('overriding color',(#553171),#138798, + #552994); +#553171 = PRESENTATION_STYLE_ASSIGNMENT((#553172)); +#553172 = SURFACE_STYLE_USAGE(.BOTH.,#553173); +#553173 = SURFACE_SIDE_STYLE('',(#553174)); +#553174 = SURFACE_STYLE_FILL_AREA(#553175); +#553175 = FILL_AREA_STYLE('',(#553176)); +#553176 = FILL_AREA_STYLE_COLOUR('',#551103); +#553177 = OVER_RIDING_STYLED_ITEM('overriding color',(#553178),#138824, + #552994); +#553178 = PRESENTATION_STYLE_ASSIGNMENT((#553179)); +#553179 = SURFACE_STYLE_USAGE(.BOTH.,#553180); +#553180 = SURFACE_SIDE_STYLE('',(#553181)); +#553181 = SURFACE_STYLE_FILL_AREA(#553182); +#553182 = FILL_AREA_STYLE('',(#553183)); +#553183 = FILL_AREA_STYLE_COLOUR('',#551103); +#553184 = OVER_RIDING_STYLED_ITEM('overriding color',(#553185),#138870, + #552994); +#553185 = PRESENTATION_STYLE_ASSIGNMENT((#553186)); +#553186 = SURFACE_STYLE_USAGE(.BOTH.,#553187); +#553187 = SURFACE_SIDE_STYLE('',(#553188)); +#553188 = SURFACE_STYLE_FILL_AREA(#553189); +#553189 = FILL_AREA_STYLE('',(#553190)); +#553190 = FILL_AREA_STYLE_COLOUR('',#551103); +#553191 = OVER_RIDING_STYLED_ITEM('overriding color',(#553192),#139013, + #552994); +#553192 = PRESENTATION_STYLE_ASSIGNMENT((#553193)); +#553193 = SURFACE_STYLE_USAGE(.BOTH.,#553194); +#553194 = SURFACE_SIDE_STYLE('',(#553195)); +#553195 = SURFACE_STYLE_FILL_AREA(#553196); +#553196 = FILL_AREA_STYLE('',(#553197)); +#553197 = FILL_AREA_STYLE_COLOUR('',#551103); +#553198 = OVER_RIDING_STYLED_ITEM('overriding color',(#553199),#139035, + #552994); +#553199 = PRESENTATION_STYLE_ASSIGNMENT((#553200)); +#553200 = SURFACE_STYLE_USAGE(.BOTH.,#553201); +#553201 = SURFACE_SIDE_STYLE('',(#553202)); +#553202 = SURFACE_STYLE_FILL_AREA(#553203); +#553203 = FILL_AREA_STYLE('',(#553204)); +#553204 = FILL_AREA_STYLE_COLOUR('',#551103); +#553205 = OVER_RIDING_STYLED_ITEM('overriding color',(#553206),#139047, + #552994); +#553206 = PRESENTATION_STYLE_ASSIGNMENT((#553207)); +#553207 = SURFACE_STYLE_USAGE(.BOTH.,#553208); +#553208 = SURFACE_SIDE_STYLE('',(#553209)); +#553209 = SURFACE_STYLE_FILL_AREA(#553210); +#553210 = FILL_AREA_STYLE('',(#553211)); +#553211 = FILL_AREA_STYLE_COLOUR('',#551103); +#553212 = OVER_RIDING_STYLED_ITEM('overriding color',(#553213),#139069, + #552994); +#553213 = PRESENTATION_STYLE_ASSIGNMENT((#553214)); +#553214 = SURFACE_STYLE_USAGE(.BOTH.,#553215); +#553215 = SURFACE_SIDE_STYLE('',(#553216)); +#553216 = SURFACE_STYLE_FILL_AREA(#553217); +#553217 = FILL_AREA_STYLE('',(#553218)); +#553218 = FILL_AREA_STYLE_COLOUR('',#551103); +#553219 = OVER_RIDING_STYLED_ITEM('overriding color',(#553220),#139081, + #552994); +#553220 = PRESENTATION_STYLE_ASSIGNMENT((#553221)); +#553221 = SURFACE_STYLE_USAGE(.BOTH.,#553222); +#553222 = SURFACE_SIDE_STYLE('',(#553223)); +#553223 = SURFACE_STYLE_FILL_AREA(#553224); +#553224 = FILL_AREA_STYLE('',(#553225)); +#553225 = FILL_AREA_STYLE_COLOUR('',#551103); +#553226 = OVER_RIDING_STYLED_ITEM('overriding color',(#553227),#139103, + #552994); +#553227 = PRESENTATION_STYLE_ASSIGNMENT((#553228)); +#553228 = SURFACE_STYLE_USAGE(.BOTH.,#553229); +#553229 = SURFACE_SIDE_STYLE('',(#553230)); +#553230 = SURFACE_STYLE_FILL_AREA(#553231); +#553231 = FILL_AREA_STYLE('',(#553232)); +#553232 = FILL_AREA_STYLE_COLOUR('',#551103); +#553233 = OVER_RIDING_STYLED_ITEM('overriding color',(#553234),#139115, + #552994); +#553234 = PRESENTATION_STYLE_ASSIGNMENT((#553235)); +#553235 = SURFACE_STYLE_USAGE(.BOTH.,#553236); +#553236 = SURFACE_SIDE_STYLE('',(#553237)); +#553237 = SURFACE_STYLE_FILL_AREA(#553238); +#553238 = FILL_AREA_STYLE('',(#553239)); +#553239 = FILL_AREA_STYLE_COLOUR('',#551103); +#553240 = OVER_RIDING_STYLED_ITEM('overriding color',(#553241),#139152, + #552994); +#553241 = PRESENTATION_STYLE_ASSIGNMENT((#553242)); +#553242 = SURFACE_STYLE_USAGE(.BOTH.,#553243); +#553243 = SURFACE_SIDE_STYLE('',(#553244)); +#553244 = SURFACE_STYLE_FILL_AREA(#553245); +#553245 = FILL_AREA_STYLE('',(#553246)); +#553246 = FILL_AREA_STYLE_COLOUR('',#551103); +#553247 = OVER_RIDING_STYLED_ITEM('overriding color',(#553248),#139183, + #552994); +#553248 = PRESENTATION_STYLE_ASSIGNMENT((#553249)); +#553249 = SURFACE_STYLE_USAGE(.BOTH.,#553250); +#553250 = SURFACE_SIDE_STYLE('',(#553251)); +#553251 = SURFACE_STYLE_FILL_AREA(#553252); +#553252 = FILL_AREA_STYLE('',(#553253)); +#553253 = FILL_AREA_STYLE_COLOUR('',#551103); +#553254 = OVER_RIDING_STYLED_ITEM('overriding color',(#553255),#139287, + #552994); +#553255 = PRESENTATION_STYLE_ASSIGNMENT((#553256)); +#553256 = SURFACE_STYLE_USAGE(.BOTH.,#553257); +#553257 = SURFACE_SIDE_STYLE('',(#553258)); +#553258 = SURFACE_STYLE_FILL_AREA(#553259); +#553259 = FILL_AREA_STYLE('',(#553260)); +#553260 = FILL_AREA_STYLE_COLOUR('',#551103); +#553261 = OVER_RIDING_STYLED_ITEM('overriding color',(#553262),#139310, + #552994); +#553262 = PRESENTATION_STYLE_ASSIGNMENT((#553263)); +#553263 = SURFACE_STYLE_USAGE(.BOTH.,#553264); +#553264 = SURFACE_SIDE_STYLE('',(#553265)); +#553265 = SURFACE_STYLE_FILL_AREA(#553266); +#553266 = FILL_AREA_STYLE('',(#553267)); +#553267 = FILL_AREA_STYLE_COLOUR('',#551103); +#553268 = OVER_RIDING_STYLED_ITEM('overriding color',(#553269),#139327, + #552994); +#553269 = PRESENTATION_STYLE_ASSIGNMENT((#553270)); +#553270 = SURFACE_STYLE_USAGE(.BOTH.,#553271); +#553271 = SURFACE_SIDE_STYLE('',(#553272)); +#553272 = SURFACE_STYLE_FILL_AREA(#553273); +#553273 = FILL_AREA_STYLE('',(#553274)); +#553274 = FILL_AREA_STYLE_COLOUR('',#551103); +#553275 = OVER_RIDING_STYLED_ITEM('overriding color',(#553276),#139344, + #552994); +#553276 = PRESENTATION_STYLE_ASSIGNMENT((#553277)); +#553277 = SURFACE_STYLE_USAGE(.BOTH.,#553278); +#553278 = SURFACE_SIDE_STYLE('',(#553279)); +#553279 = SURFACE_STYLE_FILL_AREA(#553280); +#553280 = FILL_AREA_STYLE('',(#553281)); +#553281 = FILL_AREA_STYLE_COLOUR('',#551103); +#553282 = OVER_RIDING_STYLED_ITEM('overriding color',(#553283),#139361, + #552994); +#553283 = PRESENTATION_STYLE_ASSIGNMENT((#553284)); +#553284 = SURFACE_STYLE_USAGE(.BOTH.,#553285); +#553285 = SURFACE_SIDE_STYLE('',(#553286)); +#553286 = SURFACE_STYLE_FILL_AREA(#553287); +#553287 = FILL_AREA_STYLE('',(#553288)); +#553288 = FILL_AREA_STYLE_COLOUR('',#551103); +#553289 = OVER_RIDING_STYLED_ITEM('overriding color',(#553290),#139394, + #552994); +#553290 = PRESENTATION_STYLE_ASSIGNMENT((#553291)); +#553291 = SURFACE_STYLE_USAGE(.BOTH.,#553292); +#553292 = SURFACE_SIDE_STYLE('',(#553293)); +#553293 = SURFACE_STYLE_FILL_AREA(#553294); +#553294 = FILL_AREA_STYLE('',(#553295)); +#553295 = FILL_AREA_STYLE_COLOUR('',#551103); +#553296 = OVER_RIDING_STYLED_ITEM('overriding color',(#553297),#139427, + #552994); +#553297 = PRESENTATION_STYLE_ASSIGNMENT((#553298)); +#553298 = SURFACE_STYLE_USAGE(.BOTH.,#553299); +#553299 = SURFACE_SIDE_STYLE('',(#553300)); +#553300 = SURFACE_STYLE_FILL_AREA(#553301); +#553301 = FILL_AREA_STYLE('',(#553302)); +#553302 = FILL_AREA_STYLE_COLOUR('',#551103); +#553303 = OVER_RIDING_STYLED_ITEM('overriding color',(#553304),#139467, + #552994); +#553304 = PRESENTATION_STYLE_ASSIGNMENT((#553305)); +#553305 = SURFACE_STYLE_USAGE(.BOTH.,#553306); +#553306 = SURFACE_SIDE_STYLE('',(#553307)); +#553307 = SURFACE_STYLE_FILL_AREA(#553308); +#553308 = FILL_AREA_STYLE('',(#553309)); +#553309 = FILL_AREA_STYLE_COLOUR('',#551103); +#553310 = OVER_RIDING_STYLED_ITEM('overriding color',(#553311),#139491, + #552994); +#553311 = PRESENTATION_STYLE_ASSIGNMENT((#553312)); +#553312 = SURFACE_STYLE_USAGE(.BOTH.,#553313); +#553313 = SURFACE_SIDE_STYLE('',(#553314)); +#553314 = SURFACE_STYLE_FILL_AREA(#553315); +#553315 = FILL_AREA_STYLE('',(#553316)); +#553316 = FILL_AREA_STYLE_COLOUR('',#551103); +#553317 = OVER_RIDING_STYLED_ITEM('overriding color',(#553318),#139515, + #552994); +#553318 = PRESENTATION_STYLE_ASSIGNMENT((#553319)); +#553319 = SURFACE_STYLE_USAGE(.BOTH.,#553320); +#553320 = SURFACE_SIDE_STYLE('',(#553321)); +#553321 = SURFACE_STYLE_FILL_AREA(#553322); +#553322 = FILL_AREA_STYLE('',(#553323)); +#553323 = FILL_AREA_STYLE_COLOUR('',#551103); +#553324 = OVER_RIDING_STYLED_ITEM('overriding color',(#553325),#139557, + #552994); +#553325 = PRESENTATION_STYLE_ASSIGNMENT((#553326)); +#553326 = SURFACE_STYLE_USAGE(.BOTH.,#553327); +#553327 = SURFACE_SIDE_STYLE('',(#553328)); +#553328 = SURFACE_STYLE_FILL_AREA(#553329); +#553329 = FILL_AREA_STYLE('',(#553330)); +#553330 = FILL_AREA_STYLE_COLOUR('',#551103); +#553331 = OVER_RIDING_STYLED_ITEM('overriding color',(#553332),#139581, + #552994); +#553332 = PRESENTATION_STYLE_ASSIGNMENT((#553333)); +#553333 = SURFACE_STYLE_USAGE(.BOTH.,#553334); +#553334 = SURFACE_SIDE_STYLE('',(#553335)); +#553335 = SURFACE_STYLE_FILL_AREA(#553336); +#553336 = FILL_AREA_STYLE('',(#553337)); +#553337 = FILL_AREA_STYLE_COLOUR('',#551103); +#553338 = OVER_RIDING_STYLED_ITEM('overriding color',(#553339),#139598, + #552994); +#553339 = PRESENTATION_STYLE_ASSIGNMENT((#553340)); +#553340 = SURFACE_STYLE_USAGE(.BOTH.,#553341); +#553341 = SURFACE_SIDE_STYLE('',(#553342)); +#553342 = SURFACE_STYLE_FILL_AREA(#553343); +#553343 = FILL_AREA_STYLE('',(#553344)); +#553344 = FILL_AREA_STYLE_COLOUR('',#551103); +#553345 = OVER_RIDING_STYLED_ITEM('overriding color',(#553346),#139684, + #552994); +#553346 = PRESENTATION_STYLE_ASSIGNMENT((#553347)); +#553347 = SURFACE_STYLE_USAGE(.BOTH.,#553348); +#553348 = SURFACE_SIDE_STYLE('',(#553349)); +#553349 = SURFACE_STYLE_FILL_AREA(#553350); +#553350 = FILL_AREA_STYLE('',(#553351)); +#553351 = FILL_AREA_STYLE_COLOUR('',#551103); +#553352 = OVER_RIDING_STYLED_ITEM('overriding color',(#553353),#139714, + #552994); +#553353 = PRESENTATION_STYLE_ASSIGNMENT((#553354)); +#553354 = SURFACE_STYLE_USAGE(.BOTH.,#553355); +#553355 = SURFACE_SIDE_STYLE('',(#553356)); +#553356 = SURFACE_STYLE_FILL_AREA(#553357); +#553357 = FILL_AREA_STYLE('',(#553358)); +#553358 = FILL_AREA_STYLE_COLOUR('',#551103); +#553359 = OVER_RIDING_STYLED_ITEM('overriding color',(#553360),#139746, + #552994); +#553360 = PRESENTATION_STYLE_ASSIGNMENT((#553361)); +#553361 = SURFACE_STYLE_USAGE(.BOTH.,#553362); +#553362 = SURFACE_SIDE_STYLE('',(#553363)); +#553363 = SURFACE_STYLE_FILL_AREA(#553364); +#553364 = FILL_AREA_STYLE('',(#553365)); +#553365 = FILL_AREA_STYLE_COLOUR('',#551103); +#553366 = OVER_RIDING_STYLED_ITEM('overriding color',(#553367),#139770, + #552994); +#553367 = PRESENTATION_STYLE_ASSIGNMENT((#553368)); +#553368 = SURFACE_STYLE_USAGE(.BOTH.,#553369); +#553369 = SURFACE_SIDE_STYLE('',(#553370)); +#553370 = SURFACE_STYLE_FILL_AREA(#553371); +#553371 = FILL_AREA_STYLE('',(#553372)); +#553372 = FILL_AREA_STYLE_COLOUR('',#551103); +#553373 = OVER_RIDING_STYLED_ITEM('overriding color',(#553374),#139882, + #552994); +#553374 = PRESENTATION_STYLE_ASSIGNMENT((#553375)); +#553375 = SURFACE_STYLE_USAGE(.BOTH.,#553376); +#553376 = SURFACE_SIDE_STYLE('',(#553377)); +#553377 = SURFACE_STYLE_FILL_AREA(#553378); +#553378 = FILL_AREA_STYLE('',(#553379)); +#553379 = FILL_AREA_STYLE_COLOUR('',#506663); +#553380 = OVER_RIDING_STYLED_ITEM('overriding color',(#553381),#140000, + #552994); +#553381 = PRESENTATION_STYLE_ASSIGNMENT((#553382)); +#553382 = SURFACE_STYLE_USAGE(.BOTH.,#553383); +#553383 = SURFACE_SIDE_STYLE('',(#553384)); +#553384 = SURFACE_STYLE_FILL_AREA(#553385); +#553385 = FILL_AREA_STYLE('',(#553386)); +#553386 = FILL_AREA_STYLE_COLOUR('',#506663); +#553387 = OVER_RIDING_STYLED_ITEM('overriding color',(#553388),#140109, + #552994); +#553388 = PRESENTATION_STYLE_ASSIGNMENT((#553389)); +#553389 = SURFACE_STYLE_USAGE(.BOTH.,#553390); +#553390 = SURFACE_SIDE_STYLE('',(#553391)); +#553391 = SURFACE_STYLE_FILL_AREA(#553392); +#553392 = FILL_AREA_STYLE('',(#553393)); +#553393 = FILL_AREA_STYLE_COLOUR('',#506663); +#553394 = OVER_RIDING_STYLED_ITEM('overriding color',(#553395),#140131, + #552994); +#553395 = PRESENTATION_STYLE_ASSIGNMENT((#553396)); +#553396 = SURFACE_STYLE_USAGE(.BOTH.,#553397); +#553397 = SURFACE_SIDE_STYLE('',(#553398)); +#553398 = SURFACE_STYLE_FILL_AREA(#553399); +#553399 = FILL_AREA_STYLE('',(#553400)); +#553400 = FILL_AREA_STYLE_COLOUR('',#506663); +#553401 = OVER_RIDING_STYLED_ITEM('overriding color',(#553402),#140153, + #552994); +#553402 = PRESENTATION_STYLE_ASSIGNMENT((#553403)); +#553403 = SURFACE_STYLE_USAGE(.BOTH.,#553404); +#553404 = SURFACE_SIDE_STYLE('',(#553405)); +#553405 = SURFACE_STYLE_FILL_AREA(#553406); +#553406 = FILL_AREA_STYLE('',(#553407)); +#553407 = FILL_AREA_STYLE_COLOUR('',#506663); +#553408 = OVER_RIDING_STYLED_ITEM('overriding color',(#553409),#140187, + #552994); +#553409 = PRESENTATION_STYLE_ASSIGNMENT((#553410)); +#553410 = SURFACE_STYLE_USAGE(.BOTH.,#553411); +#553411 = SURFACE_SIDE_STYLE('',(#553412)); +#553412 = SURFACE_STYLE_FILL_AREA(#553413); +#553413 = FILL_AREA_STYLE('',(#553414)); +#553414 = FILL_AREA_STYLE_COLOUR('',#506663); +#553415 = OVER_RIDING_STYLED_ITEM('overriding color',(#553416),#140314, + #552994); +#553416 = PRESENTATION_STYLE_ASSIGNMENT((#553417)); +#553417 = SURFACE_STYLE_USAGE(.BOTH.,#553418); +#553418 = SURFACE_SIDE_STYLE('',(#553419)); +#553419 = SURFACE_STYLE_FILL_AREA(#553420); +#553420 = FILL_AREA_STYLE('',(#553421)); +#553421 = FILL_AREA_STYLE_COLOUR('',#506663); +#553422 = OVER_RIDING_STYLED_ITEM('overriding color',(#553423),#140345, + #552994); +#553423 = PRESENTATION_STYLE_ASSIGNMENT((#553424)); +#553424 = SURFACE_STYLE_USAGE(.BOTH.,#553425); +#553425 = SURFACE_SIDE_STYLE('',(#553426)); +#553426 = SURFACE_STYLE_FILL_AREA(#553427); +#553427 = FILL_AREA_STYLE('',(#553428)); +#553428 = FILL_AREA_STYLE_COLOUR('',#506663); +#553429 = OVER_RIDING_STYLED_ITEM('overriding color',(#553430),#140369, + #552994); +#553430 = PRESENTATION_STYLE_ASSIGNMENT((#553431)); +#553431 = SURFACE_STYLE_USAGE(.BOTH.,#553432); +#553432 = SURFACE_SIDE_STYLE('',(#553433)); +#553433 = SURFACE_STYLE_FILL_AREA(#553434); +#553434 = FILL_AREA_STYLE('',(#553435)); +#553435 = FILL_AREA_STYLE_COLOUR('',#506663); +#553436 = OVER_RIDING_STYLED_ITEM('overriding color',(#553437),#140435, + #552994); +#553437 = PRESENTATION_STYLE_ASSIGNMENT((#553438)); +#553438 = SURFACE_STYLE_USAGE(.BOTH.,#553439); +#553439 = SURFACE_SIDE_STYLE('',(#553440)); +#553440 = SURFACE_STYLE_FILL_AREA(#553441); +#553441 = FILL_AREA_STYLE('',(#553442)); +#553442 = FILL_AREA_STYLE_COLOUR('',#506663); +#553443 = OVER_RIDING_STYLED_ITEM('overriding color',(#553444),#140457, + #552994); +#553444 = PRESENTATION_STYLE_ASSIGNMENT((#553445)); +#553445 = SURFACE_STYLE_USAGE(.BOTH.,#553446); +#553446 = SURFACE_SIDE_STYLE('',(#553447)); +#553447 = SURFACE_STYLE_FILL_AREA(#553448); +#553448 = FILL_AREA_STYLE('',(#553449)); +#553449 = FILL_AREA_STYLE_COLOUR('',#506663); +#553450 = OVER_RIDING_STYLED_ITEM('overriding color',(#553451),#140474, + #552994); +#553451 = PRESENTATION_STYLE_ASSIGNMENT((#553452)); +#553452 = SURFACE_STYLE_USAGE(.BOTH.,#553453); +#553453 = SURFACE_SIDE_STYLE('',(#553454)); +#553454 = SURFACE_STYLE_FILL_AREA(#553455); +#553455 = FILL_AREA_STYLE('',(#553456)); +#553456 = FILL_AREA_STYLE_COLOUR('',#506663); +#553457 = OVER_RIDING_STYLED_ITEM('overriding color',(#553458),#140491, + #552994); +#553458 = PRESENTATION_STYLE_ASSIGNMENT((#553459)); +#553459 = SURFACE_STYLE_USAGE(.BOTH.,#553460); +#553460 = SURFACE_SIDE_STYLE('',(#553461)); +#553461 = SURFACE_STYLE_FILL_AREA(#553462); +#553462 = FILL_AREA_STYLE('',(#553463)); +#553463 = FILL_AREA_STYLE_COLOUR('',#506663); +#553464 = OVER_RIDING_STYLED_ITEM('overriding color',(#553465),#140508, + #552994); +#553465 = PRESENTATION_STYLE_ASSIGNMENT((#553466)); +#553466 = SURFACE_STYLE_USAGE(.BOTH.,#553467); +#553467 = SURFACE_SIDE_STYLE('',(#553468)); +#553468 = SURFACE_STYLE_FILL_AREA(#553469); +#553469 = FILL_AREA_STYLE('',(#553470)); +#553470 = FILL_AREA_STYLE_COLOUR('',#506663); +#553471 = OVER_RIDING_STYLED_ITEM('overriding color',(#553472),#140520, + #552994); +#553472 = PRESENTATION_STYLE_ASSIGNMENT((#553473)); +#553473 = SURFACE_STYLE_USAGE(.BOTH.,#553474); +#553474 = SURFACE_SIDE_STYLE('',(#553475)); +#553475 = SURFACE_STYLE_FILL_AREA(#553476); +#553476 = FILL_AREA_STYLE('',(#553477)); +#553477 = FILL_AREA_STYLE_COLOUR('',#506663); +#553478 = OVER_RIDING_STYLED_ITEM('overriding color',(#553479),#140532, + #552994); +#553479 = PRESENTATION_STYLE_ASSIGNMENT((#553480)); +#553480 = SURFACE_STYLE_USAGE(.BOTH.,#553481); +#553481 = SURFACE_SIDE_STYLE('',(#553482)); +#553482 = SURFACE_STYLE_FILL_AREA(#553483); +#553483 = FILL_AREA_STYLE('',(#553484)); +#553484 = FILL_AREA_STYLE_COLOUR('',#551103); +#553485 = OVER_RIDING_STYLED_ITEM('overriding color',(#553486),#140565, + #552994); +#553486 = PRESENTATION_STYLE_ASSIGNMENT((#553487)); +#553487 = SURFACE_STYLE_USAGE(.BOTH.,#553488); +#553488 = SURFACE_SIDE_STYLE('',(#553489)); +#553489 = SURFACE_STYLE_FILL_AREA(#553490); +#553490 = FILL_AREA_STYLE('',(#553491)); +#553491 = FILL_AREA_STYLE_COLOUR('',#551103); +#553492 = OVER_RIDING_STYLED_ITEM('overriding color',(#553493),#140602, + #552994); +#553493 = PRESENTATION_STYLE_ASSIGNMENT((#553494)); +#553494 = SURFACE_STYLE_USAGE(.BOTH.,#553495); +#553495 = SURFACE_SIDE_STYLE('',(#553496)); +#553496 = SURFACE_STYLE_FILL_AREA(#553497); +#553497 = FILL_AREA_STYLE('',(#553498)); +#553498 = FILL_AREA_STYLE_COLOUR('',#551103); +#553499 = OVER_RIDING_STYLED_ITEM('overriding color',(#553500),#140633, + #552994); +#553500 = PRESENTATION_STYLE_ASSIGNMENT((#553501)); +#553501 = SURFACE_STYLE_USAGE(.BOTH.,#553502); +#553502 = SURFACE_SIDE_STYLE('',(#553503)); +#553503 = SURFACE_STYLE_FILL_AREA(#553504); +#553504 = FILL_AREA_STYLE('',(#553505)); +#553505 = FILL_AREA_STYLE_COLOUR('',#551103); +#553506 = OVER_RIDING_STYLED_ITEM('overriding color',(#553507),#140682, + #552994); +#553507 = PRESENTATION_STYLE_ASSIGNMENT((#553508)); +#553508 = SURFACE_STYLE_USAGE(.BOTH.,#553509); +#553509 = SURFACE_SIDE_STYLE('',(#553510)); +#553510 = SURFACE_STYLE_FILL_AREA(#553511); +#553511 = FILL_AREA_STYLE('',(#553512)); +#553512 = FILL_AREA_STYLE_COLOUR('',#551103); +#553513 = OVER_RIDING_STYLED_ITEM('overriding color',(#553514),#140723, + #552994); +#553514 = PRESENTATION_STYLE_ASSIGNMENT((#553515)); +#553515 = SURFACE_STYLE_USAGE(.BOTH.,#553516); +#553516 = SURFACE_SIDE_STYLE('',(#553517)); +#553517 = SURFACE_STYLE_FILL_AREA(#553518); +#553518 = FILL_AREA_STYLE('',(#553519)); +#553519 = FILL_AREA_STYLE_COLOUR('',#551103); +#553520 = OVER_RIDING_STYLED_ITEM('overriding color',(#553521),#140755, + #552994); +#553521 = PRESENTATION_STYLE_ASSIGNMENT((#553522)); +#553522 = SURFACE_STYLE_USAGE(.BOTH.,#553523); +#553523 = SURFACE_SIDE_STYLE('',(#553524)); +#553524 = SURFACE_STYLE_FILL_AREA(#553525); +#553525 = FILL_AREA_STYLE('',(#553526)); +#553526 = FILL_AREA_STYLE_COLOUR('',#551103); +#553527 = OVER_RIDING_STYLED_ITEM('overriding color',(#553528),#140779, + #552994); +#553528 = PRESENTATION_STYLE_ASSIGNMENT((#553529)); +#553529 = SURFACE_STYLE_USAGE(.BOTH.,#553530); +#553530 = SURFACE_SIDE_STYLE('',(#553531)); +#553531 = SURFACE_STYLE_FILL_AREA(#553532); +#553532 = FILL_AREA_STYLE('',(#553533)); +#553533 = FILL_AREA_STYLE_COLOUR('',#551103); +#553534 = OVER_RIDING_STYLED_ITEM('overriding color',(#553535),#140803, + #552994); +#553535 = PRESENTATION_STYLE_ASSIGNMENT((#553536)); +#553536 = SURFACE_STYLE_USAGE(.BOTH.,#553537); +#553537 = SURFACE_SIDE_STYLE('',(#553538)); +#553538 = SURFACE_STYLE_FILL_AREA(#553539); +#553539 = FILL_AREA_STYLE('',(#553540)); +#553540 = FILL_AREA_STYLE_COLOUR('',#551103); +#553541 = OVER_RIDING_STYLED_ITEM('overriding color',(#553542),#140828, + #552994); +#553542 = PRESENTATION_STYLE_ASSIGNMENT((#553543)); +#553543 = SURFACE_STYLE_USAGE(.BOTH.,#553544); +#553544 = SURFACE_SIDE_STYLE('',(#553545)); +#553545 = SURFACE_STYLE_FILL_AREA(#553546); +#553546 = FILL_AREA_STYLE('',(#553547)); +#553547 = FILL_AREA_STYLE_COLOUR('',#551103); +#553548 = OVER_RIDING_STYLED_ITEM('overriding color',(#553549),#140852, + #552994); +#553549 = PRESENTATION_STYLE_ASSIGNMENT((#553550)); +#553550 = SURFACE_STYLE_USAGE(.BOTH.,#553551); +#553551 = SURFACE_SIDE_STYLE('',(#553552)); +#553552 = SURFACE_STYLE_FILL_AREA(#553553); +#553553 = FILL_AREA_STYLE('',(#553554)); +#553554 = FILL_AREA_STYLE_COLOUR('',#551103); +#553555 = OVER_RIDING_STYLED_ITEM('overriding color',(#553556),#140870, + #552994); +#553556 = PRESENTATION_STYLE_ASSIGNMENT((#553557)); +#553557 = SURFACE_STYLE_USAGE(.BOTH.,#553558); +#553558 = SURFACE_SIDE_STYLE('',(#553559)); +#553559 = SURFACE_STYLE_FILL_AREA(#553560); +#553560 = FILL_AREA_STYLE('',(#553561)); +#553561 = FILL_AREA_STYLE_COLOUR('',#551103); +#553562 = OVER_RIDING_STYLED_ITEM('overriding color',(#553563),#140902, + #552994); +#553563 = PRESENTATION_STYLE_ASSIGNMENT((#553564)); +#553564 = SURFACE_STYLE_USAGE(.BOTH.,#553565); +#553565 = SURFACE_SIDE_STYLE('',(#553566)); +#553566 = SURFACE_STYLE_FILL_AREA(#553567); +#553567 = FILL_AREA_STYLE('',(#553568)); +#553568 = FILL_AREA_STYLE_COLOUR('',#551103); +#553569 = OVER_RIDING_STYLED_ITEM('overriding color',(#553570),#140922, + #552994); +#553570 = PRESENTATION_STYLE_ASSIGNMENT((#553571)); +#553571 = SURFACE_STYLE_USAGE(.BOTH.,#553572); +#553572 = SURFACE_SIDE_STYLE('',(#553573)); +#553573 = SURFACE_STYLE_FILL_AREA(#553574); +#553574 = FILL_AREA_STYLE('',(#553575)); +#553575 = FILL_AREA_STYLE_COLOUR('',#551103); +#553576 = OVER_RIDING_STYLED_ITEM('overriding color',(#553577),#140939, + #552994); +#553577 = PRESENTATION_STYLE_ASSIGNMENT((#553578)); +#553578 = SURFACE_STYLE_USAGE(.BOTH.,#553579); +#553579 = SURFACE_SIDE_STYLE('',(#553580)); +#553580 = SURFACE_STYLE_FILL_AREA(#553581); +#553581 = FILL_AREA_STYLE('',(#553582)); +#553582 = FILL_AREA_STYLE_COLOUR('',#551103); +#553583 = OVER_RIDING_STYLED_ITEM('overriding color',(#553584),#140974, + #552994); +#553584 = PRESENTATION_STYLE_ASSIGNMENT((#553585)); +#553585 = SURFACE_STYLE_USAGE(.BOTH.,#553586); +#553586 = SURFACE_SIDE_STYLE('',(#553587)); +#553587 = SURFACE_STYLE_FILL_AREA(#553588); +#553588 = FILL_AREA_STYLE('',(#553589)); +#553589 = FILL_AREA_STYLE_COLOUR('',#551103); +#553590 = OVER_RIDING_STYLED_ITEM('overriding color',(#553591),#141006, + #552994); +#553591 = PRESENTATION_STYLE_ASSIGNMENT((#553592)); +#553592 = SURFACE_STYLE_USAGE(.BOTH.,#553593); +#553593 = SURFACE_SIDE_STYLE('',(#553594)); +#553594 = SURFACE_STYLE_FILL_AREA(#553595); +#553595 = FILL_AREA_STYLE('',(#553596)); +#553596 = FILL_AREA_STYLE_COLOUR('',#551103); +#553597 = OVER_RIDING_STYLED_ITEM('overriding color',(#553598),#141016, + #552994); +#553598 = PRESENTATION_STYLE_ASSIGNMENT((#553599)); +#553599 = SURFACE_STYLE_USAGE(.BOTH.,#553600); +#553600 = SURFACE_SIDE_STYLE('',(#553601)); +#553601 = SURFACE_STYLE_FILL_AREA(#553602); +#553602 = FILL_AREA_STYLE('',(#553603)); +#553603 = FILL_AREA_STYLE_COLOUR('',#551103); +#553604 = OVER_RIDING_STYLED_ITEM('overriding color',(#553605),#141048, + #552994); +#553605 = PRESENTATION_STYLE_ASSIGNMENT((#553606)); +#553606 = SURFACE_STYLE_USAGE(.BOTH.,#553607); +#553607 = SURFACE_SIDE_STYLE('',(#553608)); +#553608 = SURFACE_STYLE_FILL_AREA(#553609); +#553609 = FILL_AREA_STYLE('',(#553610)); +#553610 = FILL_AREA_STYLE_COLOUR('',#551103); +#553611 = OVER_RIDING_STYLED_ITEM('overriding color',(#553612),#141058, + #552994); +#553612 = PRESENTATION_STYLE_ASSIGNMENT((#553613)); +#553613 = SURFACE_STYLE_USAGE(.BOTH.,#553614); +#553614 = SURFACE_SIDE_STYLE('',(#553615)); +#553615 = SURFACE_STYLE_FILL_AREA(#553616); +#553616 = FILL_AREA_STYLE('',(#553617)); +#553617 = FILL_AREA_STYLE_COLOUR('',#551103); +#553618 = OVER_RIDING_STYLED_ITEM('overriding color',(#553619),#141072, + #552994); +#553619 = PRESENTATION_STYLE_ASSIGNMENT((#553620)); +#553620 = SURFACE_STYLE_USAGE(.BOTH.,#553621); +#553621 = SURFACE_SIDE_STYLE('',(#553622)); +#553622 = SURFACE_STYLE_FILL_AREA(#553623); +#553623 = FILL_AREA_STYLE('',(#553624)); +#553624 = FILL_AREA_STYLE_COLOUR('',#551103); +#553625 = OVER_RIDING_STYLED_ITEM('overriding color',(#553626),#141176, + #552994); +#553626 = PRESENTATION_STYLE_ASSIGNMENT((#553627)); +#553627 = SURFACE_STYLE_USAGE(.BOTH.,#553628); +#553628 = SURFACE_SIDE_STYLE('',(#553629)); +#553629 = SURFACE_STYLE_FILL_AREA(#553630); +#553630 = FILL_AREA_STYLE('',(#553631)); +#553631 = FILL_AREA_STYLE_COLOUR('',#551103); +#553632 = OVER_RIDING_STYLED_ITEM('overriding color',(#553633),#141200, + #552994); +#553633 = PRESENTATION_STYLE_ASSIGNMENT((#553634)); +#553634 = SURFACE_STYLE_USAGE(.BOTH.,#553635); +#553635 = SURFACE_SIDE_STYLE('',(#553636)); +#553636 = SURFACE_STYLE_FILL_AREA(#553637); +#553637 = FILL_AREA_STYLE('',(#553638)); +#553638 = FILL_AREA_STYLE_COLOUR('',#551103); +#553639 = OVER_RIDING_STYLED_ITEM('overriding color',(#553640),#141231, + #552994); +#553640 = PRESENTATION_STYLE_ASSIGNMENT((#553641)); +#553641 = SURFACE_STYLE_USAGE(.BOTH.,#553642); +#553642 = SURFACE_SIDE_STYLE('',(#553643)); +#553643 = SURFACE_STYLE_FILL_AREA(#553644); +#553644 = FILL_AREA_STYLE('',(#553645)); +#553645 = FILL_AREA_STYLE_COLOUR('',#551103); +#553646 = OVER_RIDING_STYLED_ITEM('overriding color',(#553647),#141262, + #552994); +#553647 = PRESENTATION_STYLE_ASSIGNMENT((#553648)); +#553648 = SURFACE_STYLE_USAGE(.BOTH.,#553649); +#553649 = SURFACE_SIDE_STYLE('',(#553650)); +#553650 = SURFACE_STYLE_FILL_AREA(#553651); +#553651 = FILL_AREA_STYLE('',(#553652)); +#553652 = FILL_AREA_STYLE_COLOUR('',#551103); +#553653 = OVER_RIDING_STYLED_ITEM('overriding color',(#553654),#141286, + #552994); +#553654 = PRESENTATION_STYLE_ASSIGNMENT((#553655)); +#553655 = SURFACE_STYLE_USAGE(.BOTH.,#553656); +#553656 = SURFACE_SIDE_STYLE('',(#553657)); +#553657 = SURFACE_STYLE_FILL_AREA(#553658); +#553658 = FILL_AREA_STYLE('',(#553659)); +#553659 = FILL_AREA_STYLE_COLOUR('',#551103); +#553660 = OVER_RIDING_STYLED_ITEM('overriding color',(#553661),#141341, + #552994); +#553661 = PRESENTATION_STYLE_ASSIGNMENT((#553662)); +#553662 = SURFACE_STYLE_USAGE(.BOTH.,#553663); +#553663 = SURFACE_SIDE_STYLE('',(#553664)); +#553664 = SURFACE_STYLE_FILL_AREA(#553665); +#553665 = FILL_AREA_STYLE('',(#553666)); +#553666 = FILL_AREA_STYLE_COLOUR('',#551103); +#553667 = OVER_RIDING_STYLED_ITEM('overriding color',(#553668),#141365, + #552994); +#553668 = PRESENTATION_STYLE_ASSIGNMENT((#553669)); +#553669 = SURFACE_STYLE_USAGE(.BOTH.,#553670); +#553670 = SURFACE_SIDE_STYLE('',(#553671)); +#553671 = SURFACE_STYLE_FILL_AREA(#553672); +#553672 = FILL_AREA_STYLE('',(#553673)); +#553673 = FILL_AREA_STYLE_COLOUR('',#551103); +#553674 = OVER_RIDING_STYLED_ITEM('overriding color',(#553675),#141396, + #552994); +#553675 = PRESENTATION_STYLE_ASSIGNMENT((#553676)); +#553676 = SURFACE_STYLE_USAGE(.BOTH.,#553677); +#553677 = SURFACE_SIDE_STYLE('',(#553678)); +#553678 = SURFACE_STYLE_FILL_AREA(#553679); +#553679 = FILL_AREA_STYLE('',(#553680)); +#553680 = FILL_AREA_STYLE_COLOUR('',#551103); +#553681 = OVER_RIDING_STYLED_ITEM('overriding color',(#553682),#141427, + #552994); +#553682 = PRESENTATION_STYLE_ASSIGNMENT((#553683)); +#553683 = SURFACE_STYLE_USAGE(.BOTH.,#553684); +#553684 = SURFACE_SIDE_STYLE('',(#553685)); +#553685 = SURFACE_STYLE_FILL_AREA(#553686); +#553686 = FILL_AREA_STYLE('',(#553687)); +#553687 = FILL_AREA_STYLE_COLOUR('',#551103); +#553688 = OVER_RIDING_STYLED_ITEM('overriding color',(#553689),#141458, + #552994); +#553689 = PRESENTATION_STYLE_ASSIGNMENT((#553690)); +#553690 = SURFACE_STYLE_USAGE(.BOTH.,#553691); +#553691 = SURFACE_SIDE_STYLE('',(#553692)); +#553692 = SURFACE_STYLE_FILL_AREA(#553693); +#553693 = FILL_AREA_STYLE('',(#553694)); +#553694 = FILL_AREA_STYLE_COLOUR('',#551103); +#553695 = OVER_RIDING_STYLED_ITEM('overriding color',(#553696),#141482, + #552994); +#553696 = PRESENTATION_STYLE_ASSIGNMENT((#553697)); +#553697 = SURFACE_STYLE_USAGE(.BOTH.,#553698); +#553698 = SURFACE_SIDE_STYLE('',(#553699)); +#553699 = SURFACE_STYLE_FILL_AREA(#553700); +#553700 = FILL_AREA_STYLE('',(#553701)); +#553701 = FILL_AREA_STYLE_COLOUR('',#551103); +#553702 = OVER_RIDING_STYLED_ITEM('overriding color',(#553703),#141516, + #552994); +#553703 = PRESENTATION_STYLE_ASSIGNMENT((#553704)); +#553704 = SURFACE_STYLE_USAGE(.BOTH.,#553705); +#553705 = SURFACE_SIDE_STYLE('',(#553706)); +#553706 = SURFACE_STYLE_FILL_AREA(#553707); +#553707 = FILL_AREA_STYLE('',(#553708)); +#553708 = FILL_AREA_STYLE_COLOUR('',#551103); +#553709 = OVER_RIDING_STYLED_ITEM('overriding color',(#553710),#141533, + #552994); +#553710 = PRESENTATION_STYLE_ASSIGNMENT((#553711)); +#553711 = SURFACE_STYLE_USAGE(.BOTH.,#553712); +#553712 = SURFACE_SIDE_STYLE('',(#553713)); +#553713 = SURFACE_STYLE_FILL_AREA(#553714); +#553714 = FILL_AREA_STYLE('',(#553715)); +#553715 = FILL_AREA_STYLE_COLOUR('',#551103); +#553716 = OVER_RIDING_STYLED_ITEM('overriding color',(#553717),#141550, + #552994); +#553717 = PRESENTATION_STYLE_ASSIGNMENT((#553718)); +#553718 = SURFACE_STYLE_USAGE(.BOTH.,#553719); +#553719 = SURFACE_SIDE_STYLE('',(#553720)); +#553720 = SURFACE_STYLE_FILL_AREA(#553721); +#553721 = FILL_AREA_STYLE('',(#553722)); +#553722 = FILL_AREA_STYLE_COLOUR('',#551103); +#553723 = OVER_RIDING_STYLED_ITEM('overriding color',(#553724),#141562, + #552994); +#553724 = PRESENTATION_STYLE_ASSIGNMENT((#553725)); +#553725 = SURFACE_STYLE_USAGE(.BOTH.,#553726); +#553726 = SURFACE_SIDE_STYLE('',(#553727)); +#553727 = SURFACE_STYLE_FILL_AREA(#553728); +#553728 = FILL_AREA_STYLE('',(#553729)); +#553729 = FILL_AREA_STYLE_COLOUR('',#551103); +#553730 = OVER_RIDING_STYLED_ITEM('overriding color',(#553731),#141593, + #552994); +#553731 = PRESENTATION_STYLE_ASSIGNMENT((#553732)); +#553732 = SURFACE_STYLE_USAGE(.BOTH.,#553733); +#553733 = SURFACE_SIDE_STYLE('',(#553734)); +#553734 = SURFACE_STYLE_FILL_AREA(#553735); +#553735 = FILL_AREA_STYLE('',(#553736)); +#553736 = FILL_AREA_STYLE_COLOUR('',#551103); +#553737 = OVER_RIDING_STYLED_ITEM('overriding color',(#553738),#141634, + #552994); +#553738 = PRESENTATION_STYLE_ASSIGNMENT((#553739)); +#553739 = SURFACE_STYLE_USAGE(.BOTH.,#553740); +#553740 = SURFACE_SIDE_STYLE('',(#553741)); +#553741 = SURFACE_STYLE_FILL_AREA(#553742); +#553742 = FILL_AREA_STYLE('',(#553743)); +#553743 = FILL_AREA_STYLE_COLOUR('',#551103); +#553744 = OVER_RIDING_STYLED_ITEM('overriding color',(#553745),#141658, + #552994); +#553745 = PRESENTATION_STYLE_ASSIGNMENT((#553746)); +#553746 = SURFACE_STYLE_USAGE(.BOTH.,#553747); +#553747 = SURFACE_SIDE_STYLE('',(#553748)); +#553748 = SURFACE_STYLE_FILL_AREA(#553749); +#553749 = FILL_AREA_STYLE('',(#553750)); +#553750 = FILL_AREA_STYLE_COLOUR('',#551103); +#553751 = OVER_RIDING_STYLED_ITEM('overriding color',(#553752),#141685, + #552994); +#553752 = PRESENTATION_STYLE_ASSIGNMENT((#553753)); +#553753 = SURFACE_STYLE_USAGE(.BOTH.,#553754); +#553754 = SURFACE_SIDE_STYLE('',(#553755)); +#553755 = SURFACE_STYLE_FILL_AREA(#553756); +#553756 = FILL_AREA_STYLE('',(#553757)); +#553757 = FILL_AREA_STYLE_COLOUR('',#551103); +#553758 = OVER_RIDING_STYLED_ITEM('overriding color',(#553759),#141702, + #552994); +#553759 = PRESENTATION_STYLE_ASSIGNMENT((#553760)); +#553760 = SURFACE_STYLE_USAGE(.BOTH.,#553761); +#553761 = SURFACE_SIDE_STYLE('',(#553762)); +#553762 = SURFACE_STYLE_FILL_AREA(#553763); +#553763 = FILL_AREA_STYLE('',(#553764)); +#553764 = FILL_AREA_STYLE_COLOUR('',#551103); +#553765 = OVER_RIDING_STYLED_ITEM('overriding color',(#553766),#141714, + #552994); +#553766 = PRESENTATION_STYLE_ASSIGNMENT((#553767)); +#553767 = SURFACE_STYLE_USAGE(.BOTH.,#553768); +#553768 = SURFACE_SIDE_STYLE('',(#553769)); +#553769 = SURFACE_STYLE_FILL_AREA(#553770); +#553770 = FILL_AREA_STYLE('',(#553771)); +#553771 = FILL_AREA_STYLE_COLOUR('',#551103); +#553772 = OVER_RIDING_STYLED_ITEM('overriding color',(#553773),#141733, + #552994); +#553773 = PRESENTATION_STYLE_ASSIGNMENT((#553774)); +#553774 = SURFACE_STYLE_USAGE(.BOTH.,#553775); +#553775 = SURFACE_SIDE_STYLE('',(#553776)); +#553776 = SURFACE_STYLE_FILL_AREA(#553777); +#553777 = FILL_AREA_STYLE('',(#553778)); +#553778 = FILL_AREA_STYLE_COLOUR('',#551103); +#553779 = OVER_RIDING_STYLED_ITEM('overriding color',(#553780),#141745, + #552994); +#553780 = PRESENTATION_STYLE_ASSIGNMENT((#553781)); +#553781 = SURFACE_STYLE_USAGE(.BOTH.,#553782); +#553782 = SURFACE_SIDE_STYLE('',(#553783)); +#553783 = SURFACE_STYLE_FILL_AREA(#553784); +#553784 = FILL_AREA_STYLE('',(#553785)); +#553785 = FILL_AREA_STYLE_COLOUR('',#551103); +#553786 = OVER_RIDING_STYLED_ITEM('overriding color',(#553787),#141776, + #552994); +#553787 = PRESENTATION_STYLE_ASSIGNMENT((#553788)); +#553788 = SURFACE_STYLE_USAGE(.BOTH.,#553789); +#553789 = SURFACE_SIDE_STYLE('',(#553790)); +#553790 = SURFACE_STYLE_FILL_AREA(#553791); +#553791 = FILL_AREA_STYLE('',(#553792)); +#553792 = FILL_AREA_STYLE_COLOUR('',#551103); +#553793 = OVER_RIDING_STYLED_ITEM('overriding color',(#553794),#141812, + #552994); +#553794 = PRESENTATION_STYLE_ASSIGNMENT((#553795)); +#553795 = SURFACE_STYLE_USAGE(.BOTH.,#553796); +#553796 = SURFACE_SIDE_STYLE('',(#553797)); +#553797 = SURFACE_STYLE_FILL_AREA(#553798); +#553798 = FILL_AREA_STYLE('',(#553799)); +#553799 = FILL_AREA_STYLE_COLOUR('',#551103); +#553800 = OVER_RIDING_STYLED_ITEM('overriding color',(#553801),#141836, + #552994); +#553801 = PRESENTATION_STYLE_ASSIGNMENT((#553802)); +#553802 = SURFACE_STYLE_USAGE(.BOTH.,#553803); +#553803 = SURFACE_SIDE_STYLE('',(#553804)); +#553804 = SURFACE_STYLE_FILL_AREA(#553805); +#553805 = FILL_AREA_STYLE('',(#553806)); +#553806 = FILL_AREA_STYLE_COLOUR('',#551103); +#553807 = OVER_RIDING_STYLED_ITEM('overriding color',(#553808),#141863, + #552994); +#553808 = PRESENTATION_STYLE_ASSIGNMENT((#553809)); +#553809 = SURFACE_STYLE_USAGE(.BOTH.,#553810); +#553810 = SURFACE_SIDE_STYLE('',(#553811)); +#553811 = SURFACE_STYLE_FILL_AREA(#553812); +#553812 = FILL_AREA_STYLE('',(#553813)); +#553813 = FILL_AREA_STYLE_COLOUR('',#551103); +#553814 = OVER_RIDING_STYLED_ITEM('overriding color',(#553815),#141880, + #552994); +#553815 = PRESENTATION_STYLE_ASSIGNMENT((#553816)); +#553816 = SURFACE_STYLE_USAGE(.BOTH.,#553817); +#553817 = SURFACE_SIDE_STYLE('',(#553818)); +#553818 = SURFACE_STYLE_FILL_AREA(#553819); +#553819 = FILL_AREA_STYLE('',(#553820)); +#553820 = FILL_AREA_STYLE_COLOUR('',#551103); +#553821 = OVER_RIDING_STYLED_ITEM('overriding color',(#553822),#141892, + #552994); +#553822 = PRESENTATION_STYLE_ASSIGNMENT((#553823)); +#553823 = SURFACE_STYLE_USAGE(.BOTH.,#553824); +#553824 = SURFACE_SIDE_STYLE('',(#553825)); +#553825 = SURFACE_STYLE_FILL_AREA(#553826); +#553826 = FILL_AREA_STYLE('',(#553827)); +#553827 = FILL_AREA_STYLE_COLOUR('',#551103); +#553828 = OVER_RIDING_STYLED_ITEM('overriding color',(#553829),#141923, + #552994); +#553829 = PRESENTATION_STYLE_ASSIGNMENT((#553830)); +#553830 = SURFACE_STYLE_USAGE(.BOTH.,#553831); +#553831 = SURFACE_SIDE_STYLE('',(#553832)); +#553832 = SURFACE_STYLE_FILL_AREA(#553833); +#553833 = FILL_AREA_STYLE('',(#553834)); +#553834 = FILL_AREA_STYLE_COLOUR('',#551103); +#553835 = OVER_RIDING_STYLED_ITEM('overriding color',(#553836),#141964, + #552994); +#553836 = PRESENTATION_STYLE_ASSIGNMENT((#553837)); +#553837 = SURFACE_STYLE_USAGE(.BOTH.,#553838); +#553838 = SURFACE_SIDE_STYLE('',(#553839)); +#553839 = SURFACE_STYLE_FILL_AREA(#553840); +#553840 = FILL_AREA_STYLE('',(#553841)); +#553841 = FILL_AREA_STYLE_COLOUR('',#551103); +#553842 = OVER_RIDING_STYLED_ITEM('overriding color',(#553843),#141988, + #552994); +#553843 = PRESENTATION_STYLE_ASSIGNMENT((#553844)); +#553844 = SURFACE_STYLE_USAGE(.BOTH.,#553845); +#553845 = SURFACE_SIDE_STYLE('',(#553846)); +#553846 = SURFACE_STYLE_FILL_AREA(#553847); +#553847 = FILL_AREA_STYLE('',(#553848)); +#553848 = FILL_AREA_STYLE_COLOUR('',#551103); +#553849 = OVER_RIDING_STYLED_ITEM('overriding color',(#553850),#142015, + #552994); +#553850 = PRESENTATION_STYLE_ASSIGNMENT((#553851)); +#553851 = SURFACE_STYLE_USAGE(.BOTH.,#553852); +#553852 = SURFACE_SIDE_STYLE('',(#553853)); +#553853 = SURFACE_STYLE_FILL_AREA(#553854); +#553854 = FILL_AREA_STYLE('',(#553855)); +#553855 = FILL_AREA_STYLE_COLOUR('',#551103); +#553856 = OVER_RIDING_STYLED_ITEM('overriding color',(#553857),#142032, + #552994); +#553857 = PRESENTATION_STYLE_ASSIGNMENT((#553858)); +#553858 = SURFACE_STYLE_USAGE(.BOTH.,#553859); +#553859 = SURFACE_SIDE_STYLE('',(#553860)); +#553860 = SURFACE_STYLE_FILL_AREA(#553861); +#553861 = FILL_AREA_STYLE('',(#553862)); +#553862 = FILL_AREA_STYLE_COLOUR('',#551103); +#553863 = OVER_RIDING_STYLED_ITEM('overriding color',(#553864),#142044, + #552994); +#553864 = PRESENTATION_STYLE_ASSIGNMENT((#553865)); +#553865 = SURFACE_STYLE_USAGE(.BOTH.,#553866); +#553866 = SURFACE_SIDE_STYLE('',(#553867)); +#553867 = SURFACE_STYLE_FILL_AREA(#553868); +#553868 = FILL_AREA_STYLE('',(#553869)); +#553869 = FILL_AREA_STYLE_COLOUR('',#551103); +#553870 = OVER_RIDING_STYLED_ITEM('overriding color',(#553871),#142061, + #552994); +#553871 = PRESENTATION_STYLE_ASSIGNMENT((#553872)); +#553872 = SURFACE_STYLE_USAGE(.BOTH.,#553873); +#553873 = SURFACE_SIDE_STYLE('',(#553874)); +#553874 = SURFACE_STYLE_FILL_AREA(#553875); +#553875 = FILL_AREA_STYLE('',(#553876)); +#553876 = FILL_AREA_STYLE_COLOUR('',#551103); +#553877 = OVER_RIDING_STYLED_ITEM('overriding color',(#553878),#142169, + #552994); +#553878 = PRESENTATION_STYLE_ASSIGNMENT((#553879)); +#553879 = SURFACE_STYLE_USAGE(.BOTH.,#553880); +#553880 = SURFACE_SIDE_STYLE('',(#553881)); +#553881 = SURFACE_STYLE_FILL_AREA(#553882); +#553882 = FILL_AREA_STYLE('',(#553883)); +#553883 = FILL_AREA_STYLE_COLOUR('',#551103); +#553884 = OVER_RIDING_STYLED_ITEM('overriding color',(#553885),#142200, + #552994); +#553885 = PRESENTATION_STYLE_ASSIGNMENT((#553886)); +#553886 = SURFACE_STYLE_USAGE(.BOTH.,#553887); +#553887 = SURFACE_SIDE_STYLE('',(#553888)); +#553888 = SURFACE_STYLE_FILL_AREA(#553889); +#553889 = FILL_AREA_STYLE('',(#553890)); +#553890 = FILL_AREA_STYLE_COLOUR('',#551103); +#553891 = OVER_RIDING_STYLED_ITEM('overriding color',(#553892),#142293, + #552994); +#553892 = PRESENTATION_STYLE_ASSIGNMENT((#553893)); +#553893 = SURFACE_STYLE_USAGE(.BOTH.,#553894); +#553894 = SURFACE_SIDE_STYLE('',(#553895)); +#553895 = SURFACE_STYLE_FILL_AREA(#553896); +#553896 = FILL_AREA_STYLE('',(#553897)); +#553897 = FILL_AREA_STYLE_COLOUR('',#551103); +#553898 = OVER_RIDING_STYLED_ITEM('overriding color',(#553899),#142404, + #552994); +#553899 = PRESENTATION_STYLE_ASSIGNMENT((#553900)); +#553900 = SURFACE_STYLE_USAGE(.BOTH.,#553901); +#553901 = SURFACE_SIDE_STYLE('',(#553902)); +#553902 = SURFACE_STYLE_FILL_AREA(#553903); +#553903 = FILL_AREA_STYLE('',(#553904)); +#553904 = FILL_AREA_STYLE_COLOUR('',#551103); +#553905 = OVER_RIDING_STYLED_ITEM('overriding color',(#553906),#142435, + #552994); +#553906 = PRESENTATION_STYLE_ASSIGNMENT((#553907)); +#553907 = SURFACE_STYLE_USAGE(.BOTH.,#553908); +#553908 = SURFACE_SIDE_STYLE('',(#553909)); +#553909 = SURFACE_STYLE_FILL_AREA(#553910); +#553910 = FILL_AREA_STYLE('',(#553911)); +#553911 = FILL_AREA_STYLE_COLOUR('',#551103); +#553912 = OVER_RIDING_STYLED_ITEM('overriding color',(#553913),#142459, + #552994); +#553913 = PRESENTATION_STYLE_ASSIGNMENT((#553914)); +#553914 = SURFACE_STYLE_USAGE(.BOTH.,#553915); +#553915 = SURFACE_SIDE_STYLE('',(#553916)); +#553916 = SURFACE_STYLE_FILL_AREA(#553917); +#553917 = FILL_AREA_STYLE('',(#553918)); +#553918 = FILL_AREA_STYLE_COLOUR('',#551103); +#553919 = OVER_RIDING_STYLED_ITEM('overriding color',(#553920),#142483, + #552994); +#553920 = PRESENTATION_STYLE_ASSIGNMENT((#553921)); +#553921 = SURFACE_STYLE_USAGE(.BOTH.,#553922); +#553922 = SURFACE_SIDE_STYLE('',(#553923)); +#553923 = SURFACE_STYLE_FILL_AREA(#553924); +#553924 = FILL_AREA_STYLE('',(#553925)); +#553925 = FILL_AREA_STYLE_COLOUR('',#551103); +#553926 = OVER_RIDING_STYLED_ITEM('overriding color',(#553927),#142539, + #552994); +#553927 = PRESENTATION_STYLE_ASSIGNMENT((#553928)); +#553928 = SURFACE_STYLE_USAGE(.BOTH.,#553929); +#553929 = SURFACE_SIDE_STYLE('',(#553930)); +#553930 = SURFACE_STYLE_FILL_AREA(#553931); +#553931 = FILL_AREA_STYLE('',(#553932)); +#553932 = FILL_AREA_STYLE_COLOUR('',#551103); +#553933 = OVER_RIDING_STYLED_ITEM('overriding color',(#553934),#142570, + #552994); +#553934 = PRESENTATION_STYLE_ASSIGNMENT((#553935)); +#553935 = SURFACE_STYLE_USAGE(.BOTH.,#553936); +#553936 = SURFACE_SIDE_STYLE('',(#553937)); +#553937 = SURFACE_STYLE_FILL_AREA(#553938); +#553938 = FILL_AREA_STYLE('',(#553939)); +#553939 = FILL_AREA_STYLE_COLOUR('',#551103); +#553940 = OVER_RIDING_STYLED_ITEM('overriding color',(#553941),#142601, + #552994); +#553941 = PRESENTATION_STYLE_ASSIGNMENT((#553942)); +#553942 = SURFACE_STYLE_USAGE(.BOTH.,#553943); +#553943 = SURFACE_SIDE_STYLE('',(#553944)); +#553944 = SURFACE_STYLE_FILL_AREA(#553945); +#553945 = FILL_AREA_STYLE('',(#553946)); +#553946 = FILL_AREA_STYLE_COLOUR('',#551103); +#553947 = OVER_RIDING_STYLED_ITEM('overriding color',(#553948),#142642, + #552994); +#553948 = PRESENTATION_STYLE_ASSIGNMENT((#553949)); +#553949 = SURFACE_STYLE_USAGE(.BOTH.,#553950); +#553950 = SURFACE_SIDE_STYLE('',(#553951)); +#553951 = SURFACE_STYLE_FILL_AREA(#553952); +#553952 = FILL_AREA_STYLE('',(#553953)); +#553953 = FILL_AREA_STYLE_COLOUR('',#551103); +#553954 = OVER_RIDING_STYLED_ITEM('overriding color',(#553955),#142706, + #552994); +#553955 = PRESENTATION_STYLE_ASSIGNMENT((#553956)); +#553956 = SURFACE_STYLE_USAGE(.BOTH.,#553957); +#553957 = SURFACE_SIDE_STYLE('',(#553958)); +#553958 = SURFACE_STYLE_FILL_AREA(#553959); +#553959 = FILL_AREA_STYLE('',(#553960)); +#553960 = FILL_AREA_STYLE_COLOUR('',#551103); +#553961 = OVER_RIDING_STYLED_ITEM('overriding color',(#553962),#142723, + #552994); +#553962 = PRESENTATION_STYLE_ASSIGNMENT((#553963)); +#553963 = SURFACE_STYLE_USAGE(.BOTH.,#553964); +#553964 = SURFACE_SIDE_STYLE('',(#553965)); +#553965 = SURFACE_STYLE_FILL_AREA(#553966); +#553966 = FILL_AREA_STYLE('',(#553967)); +#553967 = FILL_AREA_STYLE_COLOUR('',#551103); +#553968 = OVER_RIDING_STYLED_ITEM('overriding color',(#553969),#142745, + #552994); +#553969 = PRESENTATION_STYLE_ASSIGNMENT((#553970)); +#553970 = SURFACE_STYLE_USAGE(.BOTH.,#553971); +#553971 = SURFACE_SIDE_STYLE('',(#553972)); +#553972 = SURFACE_STYLE_FILL_AREA(#553973); +#553973 = FILL_AREA_STYLE('',(#553974)); +#553974 = FILL_AREA_STYLE_COLOUR('',#551103); +#553975 = OVER_RIDING_STYLED_ITEM('overriding color',(#553976),#142810, + #552994); +#553976 = PRESENTATION_STYLE_ASSIGNMENT((#553977)); +#553977 = SURFACE_STYLE_USAGE(.BOTH.,#553978); +#553978 = SURFACE_SIDE_STYLE('',(#553979)); +#553979 = SURFACE_STYLE_FILL_AREA(#553980); +#553980 = FILL_AREA_STYLE('',(#553981)); +#553981 = FILL_AREA_STYLE_COLOUR('',#551103); +#553982 = OVER_RIDING_STYLED_ITEM('overriding color',(#553983),#142827, + #552994); +#553983 = PRESENTATION_STYLE_ASSIGNMENT((#553984)); +#553984 = SURFACE_STYLE_USAGE(.BOTH.,#553985); +#553985 = SURFACE_SIDE_STYLE('',(#553986)); +#553986 = SURFACE_STYLE_FILL_AREA(#553987); +#553987 = FILL_AREA_STYLE('',(#553988)); +#553988 = FILL_AREA_STYLE_COLOUR('',#551103); +#553989 = OVER_RIDING_STYLED_ITEM('overriding color',(#553990),#142866, + #552994); +#553990 = PRESENTATION_STYLE_ASSIGNMENT((#553991)); +#553991 = SURFACE_STYLE_USAGE(.BOTH.,#553992); +#553992 = SURFACE_SIDE_STYLE('',(#553993)); +#553993 = SURFACE_STYLE_FILL_AREA(#553994); +#553994 = FILL_AREA_STYLE('',(#553995)); +#553995 = FILL_AREA_STYLE_COLOUR('',#551103); +#553996 = OVER_RIDING_STYLED_ITEM('overriding color',(#553997),#142888, + #552994); +#553997 = PRESENTATION_STYLE_ASSIGNMENT((#553998)); +#553998 = SURFACE_STYLE_USAGE(.BOTH.,#553999); +#553999 = SURFACE_SIDE_STYLE('',(#554000)); +#554000 = SURFACE_STYLE_FILL_AREA(#554001); +#554001 = FILL_AREA_STYLE('',(#554002)); +#554002 = FILL_AREA_STYLE_COLOUR('',#551103); +#554003 = OVER_RIDING_STYLED_ITEM('overriding color',(#554004),#142905, + #552994); +#554004 = PRESENTATION_STYLE_ASSIGNMENT((#554005)); +#554005 = SURFACE_STYLE_USAGE(.BOTH.,#554006); +#554006 = SURFACE_SIDE_STYLE('',(#554007)); +#554007 = SURFACE_STYLE_FILL_AREA(#554008); +#554008 = FILL_AREA_STYLE('',(#554009)); +#554009 = FILL_AREA_STYLE_COLOUR('',#551103); +#554010 = OVER_RIDING_STYLED_ITEM('overriding color',(#554011),#142986, + #552994); +#554011 = PRESENTATION_STYLE_ASSIGNMENT((#554012)); +#554012 = SURFACE_STYLE_USAGE(.BOTH.,#554013); +#554013 = SURFACE_SIDE_STYLE('',(#554014)); +#554014 = SURFACE_STYLE_FILL_AREA(#554015); +#554015 = FILL_AREA_STYLE('',(#554016)); +#554016 = FILL_AREA_STYLE_COLOUR('',#551103); +#554017 = OVER_RIDING_STYLED_ITEM('overriding color',(#554018),#142998, + #552994); +#554018 = PRESENTATION_STYLE_ASSIGNMENT((#554019)); +#554019 = SURFACE_STYLE_USAGE(.BOTH.,#554020); +#554020 = SURFACE_SIDE_STYLE('',(#554021)); +#554021 = SURFACE_STYLE_FILL_AREA(#554022); +#554022 = FILL_AREA_STYLE('',(#554023)); +#554023 = FILL_AREA_STYLE_COLOUR('',#551103); +#554024 = OVER_RIDING_STYLED_ITEM('overriding color',(#554025),#143028, + #552994); +#554025 = PRESENTATION_STYLE_ASSIGNMENT((#554026)); +#554026 = SURFACE_STYLE_USAGE(.BOTH.,#554027); +#554027 = SURFACE_SIDE_STYLE('',(#554028)); +#554028 = SURFACE_STYLE_FILL_AREA(#554029); +#554029 = FILL_AREA_STYLE('',(#554030)); +#554030 = FILL_AREA_STYLE_COLOUR('',#551103); +#554031 = OVER_RIDING_STYLED_ITEM('overriding color',(#554032),#143249, + #552994); +#554032 = PRESENTATION_STYLE_ASSIGNMENT((#554033)); +#554033 = SURFACE_STYLE_USAGE(.BOTH.,#554034); +#554034 = SURFACE_SIDE_STYLE('',(#554035)); +#554035 = SURFACE_STYLE_FILL_AREA(#554036); +#554036 = FILL_AREA_STYLE('',(#554037)); +#554037 = FILL_AREA_STYLE_COLOUR('',#551103); +#554038 = OVER_RIDING_STYLED_ITEM('overriding color',(#554039),#143266, + #552994); +#554039 = PRESENTATION_STYLE_ASSIGNMENT((#554040)); +#554040 = SURFACE_STYLE_USAGE(.BOTH.,#554041); +#554041 = SURFACE_SIDE_STYLE('',(#554042)); +#554042 = SURFACE_STYLE_FILL_AREA(#554043); +#554043 = FILL_AREA_STYLE('',(#554044)); +#554044 = FILL_AREA_STYLE_COLOUR('',#551103); +#554045 = OVER_RIDING_STYLED_ITEM('overriding color',(#554046),#143283, + #552994); +#554046 = PRESENTATION_STYLE_ASSIGNMENT((#554047)); +#554047 = SURFACE_STYLE_USAGE(.BOTH.,#554048); +#554048 = SURFACE_SIDE_STYLE('',(#554049)); +#554049 = SURFACE_STYLE_FILL_AREA(#554050); +#554050 = FILL_AREA_STYLE('',(#554051)); +#554051 = FILL_AREA_STYLE_COLOUR('',#551103); +#554052 = OVER_RIDING_STYLED_ITEM('overriding color',(#554053),#143295, + #552994); +#554053 = PRESENTATION_STYLE_ASSIGNMENT((#554054)); +#554054 = SURFACE_STYLE_USAGE(.BOTH.,#554055); +#554055 = SURFACE_SIDE_STYLE('',(#554056)); +#554056 = SURFACE_STYLE_FILL_AREA(#554057); +#554057 = FILL_AREA_STYLE('',(#554058)); +#554058 = FILL_AREA_STYLE_COLOUR('',#551103); +#554059 = OVER_RIDING_STYLED_ITEM('overriding color',(#554060),#143307, + #552994); +#554060 = PRESENTATION_STYLE_ASSIGNMENT((#554061)); +#554061 = SURFACE_STYLE_USAGE(.BOTH.,#554062); +#554062 = SURFACE_SIDE_STYLE('',(#554063)); +#554063 = SURFACE_STYLE_FILL_AREA(#554064); +#554064 = FILL_AREA_STYLE('',(#554065)); +#554065 = FILL_AREA_STYLE_COLOUR('',#551103); +#554066 = OVER_RIDING_STYLED_ITEM('overriding color',(#554067),#143324, + #552994); +#554067 = PRESENTATION_STYLE_ASSIGNMENT((#554068)); +#554068 = SURFACE_STYLE_USAGE(.BOTH.,#554069); +#554069 = SURFACE_SIDE_STYLE('',(#554070)); +#554070 = SURFACE_STYLE_FILL_AREA(#554071); +#554071 = FILL_AREA_STYLE('',(#554072)); +#554072 = FILL_AREA_STYLE_COLOUR('',#551103); +#554073 = OVER_RIDING_STYLED_ITEM('overriding color',(#554074),#143341, + #552994); +#554074 = PRESENTATION_STYLE_ASSIGNMENT((#554075)); +#554075 = SURFACE_STYLE_USAGE(.BOTH.,#554076); +#554076 = SURFACE_SIDE_STYLE('',(#554077)); +#554077 = SURFACE_STYLE_FILL_AREA(#554078); +#554078 = FILL_AREA_STYLE('',(#554079)); +#554079 = FILL_AREA_STYLE_COLOUR('',#551103); +#554080 = OVER_RIDING_STYLED_ITEM('overriding color',(#554081),#143358, + #552994); +#554081 = PRESENTATION_STYLE_ASSIGNMENT((#554082)); +#554082 = SURFACE_STYLE_USAGE(.BOTH.,#554083); +#554083 = SURFACE_SIDE_STYLE('',(#554084)); +#554084 = SURFACE_STYLE_FILL_AREA(#554085); +#554085 = FILL_AREA_STYLE('',(#554086)); +#554086 = FILL_AREA_STYLE_COLOUR('',#551103); +#554087 = OVER_RIDING_STYLED_ITEM('overriding color',(#554088),#143375, + #552994); +#554088 = PRESENTATION_STYLE_ASSIGNMENT((#554089)); +#554089 = SURFACE_STYLE_USAGE(.BOTH.,#554090); +#554090 = SURFACE_SIDE_STYLE('',(#554091)); +#554091 = SURFACE_STYLE_FILL_AREA(#554092); +#554092 = FILL_AREA_STYLE('',(#554093)); +#554093 = FILL_AREA_STYLE_COLOUR('',#551103); +#554094 = OVER_RIDING_STYLED_ITEM('overriding color',(#554095),#143387, + #552994); +#554095 = PRESENTATION_STYLE_ASSIGNMENT((#554096)); +#554096 = SURFACE_STYLE_USAGE(.BOTH.,#554097); +#554097 = SURFACE_SIDE_STYLE('',(#554098)); +#554098 = SURFACE_STYLE_FILL_AREA(#554099); +#554099 = FILL_AREA_STYLE('',(#554100)); +#554100 = FILL_AREA_STYLE_COLOUR('',#551103); +#554101 = OVER_RIDING_STYLED_ITEM('overriding color',(#554102),#143399, + #552994); +#554102 = PRESENTATION_STYLE_ASSIGNMENT((#554103)); +#554103 = SURFACE_STYLE_USAGE(.BOTH.,#554104); +#554104 = SURFACE_SIDE_STYLE('',(#554105)); +#554105 = SURFACE_STYLE_FILL_AREA(#554106); +#554106 = FILL_AREA_STYLE('',(#554107)); +#554107 = FILL_AREA_STYLE_COLOUR('',#551103); +#554108 = OVER_RIDING_STYLED_ITEM('overriding color',(#554109),#143438, + #552994); +#554109 = PRESENTATION_STYLE_ASSIGNMENT((#554110)); +#554110 = SURFACE_STYLE_USAGE(.BOTH.,#554111); +#554111 = SURFACE_SIDE_STYLE('',(#554112)); +#554112 = SURFACE_STYLE_FILL_AREA(#554113); +#554113 = FILL_AREA_STYLE('',(#554114)); +#554114 = FILL_AREA_STYLE_COLOUR('',#553022); +#554115 = OVER_RIDING_STYLED_ITEM('overriding color',(#554116),#143466, + #552994); +#554116 = PRESENTATION_STYLE_ASSIGNMENT((#554117)); +#554117 = SURFACE_STYLE_USAGE(.BOTH.,#554118); +#554118 = SURFACE_SIDE_STYLE('',(#554119)); +#554119 = SURFACE_STYLE_FILL_AREA(#554120); +#554120 = FILL_AREA_STYLE('',(#554121)); +#554121 = FILL_AREA_STYLE_COLOUR('',#553022); +#554122 = OVER_RIDING_STYLED_ITEM('overriding color',(#554123),#143484, + #552994); +#554123 = PRESENTATION_STYLE_ASSIGNMENT((#554124)); +#554124 = SURFACE_STYLE_USAGE(.BOTH.,#554125); +#554125 = SURFACE_SIDE_STYLE('',(#554126)); +#554126 = SURFACE_STYLE_FILL_AREA(#554127); +#554127 = FILL_AREA_STYLE('',(#554128)); +#554128 = FILL_AREA_STYLE_COLOUR('',#553022); +#554129 = OVER_RIDING_STYLED_ITEM('overriding color',(#554130),#143496, + #552994); +#554130 = PRESENTATION_STYLE_ASSIGNMENT((#554131)); +#554131 = SURFACE_STYLE_USAGE(.BOTH.,#554132); +#554132 = SURFACE_SIDE_STYLE('',(#554133)); +#554133 = SURFACE_STYLE_FILL_AREA(#554134); +#554134 = FILL_AREA_STYLE('',(#554135)); +#554135 = FILL_AREA_STYLE_COLOUR('',#553022); +#554136 = OVER_RIDING_STYLED_ITEM('overriding color',(#554137),#143513, + #552994); +#554137 = PRESENTATION_STYLE_ASSIGNMENT((#554138)); +#554138 = SURFACE_STYLE_USAGE(.BOTH.,#554139); +#554139 = SURFACE_SIDE_STYLE('',(#554140)); +#554140 = SURFACE_STYLE_FILL_AREA(#554141); +#554141 = FILL_AREA_STYLE('',(#554142)); +#554142 = FILL_AREA_STYLE_COLOUR('',#551103); +#554143 = OVER_RIDING_STYLED_ITEM('overriding color',(#554144),#143526, + #552994); +#554144 = PRESENTATION_STYLE_ASSIGNMENT((#554145)); +#554145 = SURFACE_STYLE_USAGE(.BOTH.,#554146); +#554146 = SURFACE_SIDE_STYLE('',(#554147)); +#554147 = SURFACE_STYLE_FILL_AREA(#554148); +#554148 = FILL_AREA_STYLE('',(#554149)); +#554149 = FILL_AREA_STYLE_COLOUR('',#551103); +#554150 = OVER_RIDING_STYLED_ITEM('overriding color',(#554151),#143546, + #552994); +#554151 = PRESENTATION_STYLE_ASSIGNMENT((#554152)); +#554152 = SURFACE_STYLE_USAGE(.BOTH.,#554153); +#554153 = SURFACE_SIDE_STYLE('',(#554154)); +#554154 = SURFACE_STYLE_FILL_AREA(#554155); +#554155 = FILL_AREA_STYLE('',(#554156)); +#554156 = FILL_AREA_STYLE_COLOUR('',#551103); +#554157 = OVER_RIDING_STYLED_ITEM('overriding color',(#554158),#143610, + #552994); +#554158 = PRESENTATION_STYLE_ASSIGNMENT((#554159)); +#554159 = SURFACE_STYLE_USAGE(.BOTH.,#554160); +#554160 = SURFACE_SIDE_STYLE('',(#554161)); +#554161 = SURFACE_STYLE_FILL_AREA(#554162); +#554162 = FILL_AREA_STYLE('',(#554163)); +#554163 = FILL_AREA_STYLE_COLOUR('',#546242); +#554164 = OVER_RIDING_STYLED_ITEM('overriding color',(#554165),#143709, + #552994); +#554165 = PRESENTATION_STYLE_ASSIGNMENT((#554166)); +#554166 = SURFACE_STYLE_USAGE(.BOTH.,#554167); +#554167 = SURFACE_SIDE_STYLE('',(#554168)); +#554168 = SURFACE_STYLE_FILL_AREA(#554169); +#554169 = FILL_AREA_STYLE('',(#554170)); +#554170 = FILL_AREA_STYLE_COLOUR('',#551103); +#554171 = OVER_RIDING_STYLED_ITEM('overriding color',(#554172),#143741, + #552994); +#554172 = PRESENTATION_STYLE_ASSIGNMENT((#554173)); +#554173 = SURFACE_STYLE_USAGE(.BOTH.,#554174); +#554174 = SURFACE_SIDE_STYLE('',(#554175)); +#554175 = SURFACE_STYLE_FILL_AREA(#554176); +#554176 = FILL_AREA_STYLE('',(#554177)); +#554177 = FILL_AREA_STYLE_COLOUR('',#551103); +#554178 = OVER_RIDING_STYLED_ITEM('overriding color',(#554179),#143775, + #552994); +#554179 = PRESENTATION_STYLE_ASSIGNMENT((#554180)); +#554180 = SURFACE_STYLE_USAGE(.BOTH.,#554181); +#554181 = SURFACE_SIDE_STYLE('',(#554182)); +#554182 = SURFACE_STYLE_FILL_AREA(#554183); +#554183 = FILL_AREA_STYLE('',(#554184)); +#554184 = FILL_AREA_STYLE_COLOUR('',#551103); +#554185 = OVER_RIDING_STYLED_ITEM('overriding color',(#554186),#143791, + #552994); +#554186 = PRESENTATION_STYLE_ASSIGNMENT((#554187)); +#554187 = SURFACE_STYLE_USAGE(.BOTH.,#554188); +#554188 = SURFACE_SIDE_STYLE('',(#554189)); +#554189 = SURFACE_STYLE_FILL_AREA(#554190); +#554190 = FILL_AREA_STYLE('',(#554191)); +#554191 = FILL_AREA_STYLE_COLOUR('',#551103); +#554192 = OVER_RIDING_STYLED_ITEM('overriding color',(#554193),#143817, + #552994); +#554193 = PRESENTATION_STYLE_ASSIGNMENT((#554194)); +#554194 = SURFACE_STYLE_USAGE(.BOTH.,#554195); +#554195 = SURFACE_SIDE_STYLE('',(#554196)); +#554196 = SURFACE_STYLE_FILL_AREA(#554197); +#554197 = FILL_AREA_STYLE('',(#554198)); +#554198 = FILL_AREA_STYLE_COLOUR('',#551103); +#554199 = OVER_RIDING_STYLED_ITEM('overriding color',(#554200),#143835, + #552994); +#554200 = PRESENTATION_STYLE_ASSIGNMENT((#554201)); +#554201 = SURFACE_STYLE_USAGE(.BOTH.,#554202); +#554202 = SURFACE_SIDE_STYLE('',(#554203)); +#554203 = SURFACE_STYLE_FILL_AREA(#554204); +#554204 = FILL_AREA_STYLE('',(#554205)); +#554205 = FILL_AREA_STYLE_COLOUR('',#551103); +#554206 = OVER_RIDING_STYLED_ITEM('overriding color',(#554207),#143847, + #552994); +#554207 = PRESENTATION_STYLE_ASSIGNMENT((#554208)); +#554208 = SURFACE_STYLE_USAGE(.BOTH.,#554209); +#554209 = SURFACE_SIDE_STYLE('',(#554210)); +#554210 = SURFACE_STYLE_FILL_AREA(#554211); +#554211 = FILL_AREA_STYLE('',(#554212)); +#554212 = FILL_AREA_STYLE_COLOUR('',#551103); +#554213 = OVER_RIDING_STYLED_ITEM('overriding color',(#554214),#143881, + #552994); +#554214 = PRESENTATION_STYLE_ASSIGNMENT((#554215)); +#554215 = SURFACE_STYLE_USAGE(.BOTH.,#554216); +#554216 = SURFACE_SIDE_STYLE('',(#554217)); +#554217 = SURFACE_STYLE_FILL_AREA(#554218); +#554218 = FILL_AREA_STYLE('',(#554219)); +#554219 = FILL_AREA_STYLE_COLOUR('',#551103); +#554220 = OVER_RIDING_STYLED_ITEM('overriding color',(#554221),#143899, + #552994); +#554221 = PRESENTATION_STYLE_ASSIGNMENT((#554222)); +#554222 = SURFACE_STYLE_USAGE(.BOTH.,#554223); +#554223 = SURFACE_SIDE_STYLE('',(#554224)); +#554224 = SURFACE_STYLE_FILL_AREA(#554225); +#554225 = FILL_AREA_STYLE('',(#554226)); +#554226 = FILL_AREA_STYLE_COLOUR('',#551103); +#554227 = OVER_RIDING_STYLED_ITEM('overriding color',(#554228),#143921, + #552994); +#554228 = PRESENTATION_STYLE_ASSIGNMENT((#554229)); +#554229 = SURFACE_STYLE_USAGE(.BOTH.,#554230); +#554230 = SURFACE_SIDE_STYLE('',(#554231)); +#554231 = SURFACE_STYLE_FILL_AREA(#554232); +#554232 = FILL_AREA_STYLE('',(#554233)); +#554233 = FILL_AREA_STYLE_COLOUR('',#551103); +#554234 = OVER_RIDING_STYLED_ITEM('overriding color',(#554235),#143933, + #552994); +#554235 = PRESENTATION_STYLE_ASSIGNMENT((#554236)); +#554236 = SURFACE_STYLE_USAGE(.BOTH.,#554237); +#554237 = SURFACE_SIDE_STYLE('',(#554238)); +#554238 = SURFACE_STYLE_FILL_AREA(#554239); +#554239 = FILL_AREA_STYLE('',(#554240)); +#554240 = FILL_AREA_STYLE_COLOUR('',#546242); +#554241 = OVER_RIDING_STYLED_ITEM('overriding color',(#554242),#143957, + #552994); +#554242 = PRESENTATION_STYLE_ASSIGNMENT((#554243)); +#554243 = SURFACE_STYLE_USAGE(.BOTH.,#554244); +#554244 = SURFACE_SIDE_STYLE('',(#554245)); +#554245 = SURFACE_STYLE_FILL_AREA(#554246); +#554246 = FILL_AREA_STYLE('',(#554247)); +#554247 = FILL_AREA_STYLE_COLOUR('',#546242); +#554248 = OVER_RIDING_STYLED_ITEM('overriding color',(#554249),#144009, + #552994); +#554249 = PRESENTATION_STYLE_ASSIGNMENT((#554250)); +#554250 = SURFACE_STYLE_USAGE(.BOTH.,#554251); +#554251 = SURFACE_SIDE_STYLE('',(#554252)); +#554252 = SURFACE_STYLE_FILL_AREA(#554253); +#554253 = FILL_AREA_STYLE('',(#554254)); +#554254 = FILL_AREA_STYLE_COLOUR('',#551103); +#554255 = OVER_RIDING_STYLED_ITEM('overriding color',(#554256),#144021, + #552994); +#554256 = PRESENTATION_STYLE_ASSIGNMENT((#554257)); +#554257 = SURFACE_STYLE_USAGE(.BOTH.,#554258); +#554258 = SURFACE_SIDE_STYLE('',(#554259)); +#554259 = SURFACE_STYLE_FILL_AREA(#554260); +#554260 = FILL_AREA_STYLE('',(#554261)); +#554261 = FILL_AREA_STYLE_COLOUR('',#546242); +#554262 = OVER_RIDING_STYLED_ITEM('overriding color',(#554263),#144038, + #552994); +#554263 = PRESENTATION_STYLE_ASSIGNMENT((#554264)); +#554264 = SURFACE_STYLE_USAGE(.BOTH.,#554265); +#554265 = SURFACE_SIDE_STYLE('',(#554266)); +#554266 = SURFACE_STYLE_FILL_AREA(#554267); +#554267 = FILL_AREA_STYLE('',(#554268)); +#554268 = FILL_AREA_STYLE_COLOUR('',#546242); +#554269 = OVER_RIDING_STYLED_ITEM('overriding color',(#554270),#144055, + #552994); +#554270 = PRESENTATION_STYLE_ASSIGNMENT((#554271)); +#554271 = SURFACE_STYLE_USAGE(.BOTH.,#554272); +#554272 = SURFACE_SIDE_STYLE('',(#554273)); +#554273 = SURFACE_STYLE_FILL_AREA(#554274); +#554274 = FILL_AREA_STYLE('',(#554275)); +#554275 = FILL_AREA_STYLE_COLOUR('',#546242); +#554276 = OVER_RIDING_STYLED_ITEM('overriding color',(#554277),#144072, + #552994); +#554277 = PRESENTATION_STYLE_ASSIGNMENT((#554278)); +#554278 = SURFACE_STYLE_USAGE(.BOTH.,#554279); +#554279 = SURFACE_SIDE_STYLE('',(#554280)); +#554280 = SURFACE_STYLE_FILL_AREA(#554281); +#554281 = FILL_AREA_STYLE('',(#554282)); +#554282 = FILL_AREA_STYLE_COLOUR('',#546242); +#554283 = OVER_RIDING_STYLED_ITEM('overriding color',(#554284),#144084, + #552994); +#554284 = PRESENTATION_STYLE_ASSIGNMENT((#554285)); +#554285 = SURFACE_STYLE_USAGE(.BOTH.,#554286); +#554286 = SURFACE_SIDE_STYLE('',(#554287)); +#554287 = SURFACE_STYLE_FILL_AREA(#554288); +#554288 = FILL_AREA_STYLE('',(#554289)); +#554289 = FILL_AREA_STYLE_COLOUR('',#551103); +#554290 = OVER_RIDING_STYLED_ITEM('overriding color',(#554291),#144096, + #552994); +#554291 = PRESENTATION_STYLE_ASSIGNMENT((#554292)); +#554292 = SURFACE_STYLE_USAGE(.BOTH.,#554293); +#554293 = SURFACE_SIDE_STYLE('',(#554294)); +#554294 = SURFACE_STYLE_FILL_AREA(#554295); +#554295 = FILL_AREA_STYLE('',(#554296)); +#554296 = FILL_AREA_STYLE_COLOUR('',#551103); +#554297 = OVER_RIDING_STYLED_ITEM('overriding color',(#554298),#144113, + #552994); +#554298 = PRESENTATION_STYLE_ASSIGNMENT((#554299)); +#554299 = SURFACE_STYLE_USAGE(.BOTH.,#554300); +#554300 = SURFACE_SIDE_STYLE('',(#554301)); +#554301 = SURFACE_STYLE_FILL_AREA(#554302); +#554302 = FILL_AREA_STYLE('',(#554303)); +#554303 = FILL_AREA_STYLE_COLOUR('',#551103); +#554304 = OVER_RIDING_STYLED_ITEM('overriding color',(#554305),#144130, + #552994); +#554305 = PRESENTATION_STYLE_ASSIGNMENT((#554306)); +#554306 = SURFACE_STYLE_USAGE(.BOTH.,#554307); +#554307 = SURFACE_SIDE_STYLE('',(#554308)); +#554308 = SURFACE_STYLE_FILL_AREA(#554309); +#554309 = FILL_AREA_STYLE('',(#554310)); +#554310 = FILL_AREA_STYLE_COLOUR('',#551103); +#554311 = OVER_RIDING_STYLED_ITEM('overriding color',(#554312),#144147, + #552994); +#554312 = PRESENTATION_STYLE_ASSIGNMENT((#554313)); +#554313 = SURFACE_STYLE_USAGE(.BOTH.,#554314); +#554314 = SURFACE_SIDE_STYLE('',(#554315)); +#554315 = SURFACE_STYLE_FILL_AREA(#554316); +#554316 = FILL_AREA_STYLE('',(#554317)); +#554317 = FILL_AREA_STYLE_COLOUR('',#551103); +#554318 = OVER_RIDING_STYLED_ITEM('overriding color',(#554319),#144164, + #552994); +#554319 = PRESENTATION_STYLE_ASSIGNMENT((#554320)); +#554320 = SURFACE_STYLE_USAGE(.BOTH.,#554321); +#554321 = SURFACE_SIDE_STYLE('',(#554322)); +#554322 = SURFACE_STYLE_FILL_AREA(#554323); +#554323 = FILL_AREA_STYLE('',(#554324)); +#554324 = FILL_AREA_STYLE_COLOUR('',#551103); +#554325 = OVER_RIDING_STYLED_ITEM('overriding color',(#554326),#144181, + #552994); +#554326 = PRESENTATION_STYLE_ASSIGNMENT((#554327)); +#554327 = SURFACE_STYLE_USAGE(.BOTH.,#554328); +#554328 = SURFACE_SIDE_STYLE('',(#554329)); +#554329 = SURFACE_STYLE_FILL_AREA(#554330); +#554330 = FILL_AREA_STYLE('',(#554331)); +#554331 = FILL_AREA_STYLE_COLOUR('',#551103); +#554332 = OVER_RIDING_STYLED_ITEM('overriding color',(#554333),#144204, + #552994); +#554333 = PRESENTATION_STYLE_ASSIGNMENT((#554334)); +#554334 = SURFACE_STYLE_USAGE(.BOTH.,#554335); +#554335 = SURFACE_SIDE_STYLE('',(#554336)); +#554336 = SURFACE_STYLE_FILL_AREA(#554337); +#554337 = FILL_AREA_STYLE('',(#554338)); +#554338 = FILL_AREA_STYLE_COLOUR('',#551103); +#554339 = OVER_RIDING_STYLED_ITEM('overriding color',(#554340),#144221, + #552994); +#554340 = PRESENTATION_STYLE_ASSIGNMENT((#554341)); +#554341 = SURFACE_STYLE_USAGE(.BOTH.,#554342); +#554342 = SURFACE_SIDE_STYLE('',(#554343)); +#554343 = SURFACE_STYLE_FILL_AREA(#554344); +#554344 = FILL_AREA_STYLE('',(#554345)); +#554345 = FILL_AREA_STYLE_COLOUR('',#551103); +#554346 = OVER_RIDING_STYLED_ITEM('overriding color',(#554347),#144238, + #552994); +#554347 = PRESENTATION_STYLE_ASSIGNMENT((#554348)); +#554348 = SURFACE_STYLE_USAGE(.BOTH.,#554349); +#554349 = SURFACE_SIDE_STYLE('',(#554350)); +#554350 = SURFACE_STYLE_FILL_AREA(#554351); +#554351 = FILL_AREA_STYLE('',(#554352)); +#554352 = FILL_AREA_STYLE_COLOUR('',#551103); +#554353 = OVER_RIDING_STYLED_ITEM('overriding color',(#554354),#144250, + #552994); +#554354 = PRESENTATION_STYLE_ASSIGNMENT((#554355)); +#554355 = SURFACE_STYLE_USAGE(.BOTH.,#554356); +#554356 = SURFACE_SIDE_STYLE('',(#554357)); +#554357 = SURFACE_STYLE_FILL_AREA(#554358); +#554358 = FILL_AREA_STYLE('',(#554359)); +#554359 = FILL_AREA_STYLE_COLOUR('',#551103); +#554360 = OVER_RIDING_STYLED_ITEM('overriding color',(#554361),#144262, + #552994); +#554361 = PRESENTATION_STYLE_ASSIGNMENT((#554362)); +#554362 = SURFACE_STYLE_USAGE(.BOTH.,#554363); +#554363 = SURFACE_SIDE_STYLE('',(#554364)); +#554364 = SURFACE_STYLE_FILL_AREA(#554365); +#554365 = FILL_AREA_STYLE('',(#554366)); +#554366 = FILL_AREA_STYLE_COLOUR('',#551103); +#554367 = OVER_RIDING_STYLED_ITEM('overriding color',(#554368),#144279, + #552994); +#554368 = PRESENTATION_STYLE_ASSIGNMENT((#554369)); +#554369 = SURFACE_STYLE_USAGE(.BOTH.,#554370); +#554370 = SURFACE_SIDE_STYLE('',(#554371)); +#554371 = SURFACE_STYLE_FILL_AREA(#554372); +#554372 = FILL_AREA_STYLE('',(#554373)); +#554373 = FILL_AREA_STYLE_COLOUR('',#551103); +#554374 = OVER_RIDING_STYLED_ITEM('overriding color',(#554375),#144298, + #552994); +#554375 = PRESENTATION_STYLE_ASSIGNMENT((#554376)); +#554376 = SURFACE_STYLE_USAGE(.BOTH.,#554377); +#554377 = SURFACE_SIDE_STYLE('',(#554378)); +#554378 = SURFACE_STYLE_FILL_AREA(#554379); +#554379 = FILL_AREA_STYLE('',(#554380)); +#554380 = FILL_AREA_STYLE_COLOUR('',#551103); +#554381 = OVER_RIDING_STYLED_ITEM('overriding color',(#554382),#144315, + #552994); +#554382 = PRESENTATION_STYLE_ASSIGNMENT((#554383)); +#554383 = SURFACE_STYLE_USAGE(.BOTH.,#554384); +#554384 = SURFACE_SIDE_STYLE('',(#554385)); +#554385 = SURFACE_STYLE_FILL_AREA(#554386); +#554386 = FILL_AREA_STYLE('',(#554387)); +#554387 = FILL_AREA_STYLE_COLOUR('',#551103); +#554388 = OVER_RIDING_STYLED_ITEM('overriding color',(#554389),#144332, + #552994); +#554389 = PRESENTATION_STYLE_ASSIGNMENT((#554390)); +#554390 = SURFACE_STYLE_USAGE(.BOTH.,#554391); +#554391 = SURFACE_SIDE_STYLE('',(#554392)); +#554392 = SURFACE_STYLE_FILL_AREA(#554393); +#554393 = FILL_AREA_STYLE('',(#554394)); +#554394 = FILL_AREA_STYLE_COLOUR('',#551103); +#554395 = OVER_RIDING_STYLED_ITEM('overriding color',(#554396),#144345, + #552994); +#554396 = PRESENTATION_STYLE_ASSIGNMENT((#554397)); +#554397 = SURFACE_STYLE_USAGE(.BOTH.,#554398); +#554398 = SURFACE_SIDE_STYLE('',(#554399)); +#554399 = SURFACE_STYLE_FILL_AREA(#554400); +#554400 = FILL_AREA_STYLE('',(#554401)); +#554401 = FILL_AREA_STYLE_COLOUR('',#551103); +#554402 = OVER_RIDING_STYLED_ITEM('overriding color',(#554403),#144363, + #552994); +#554403 = PRESENTATION_STYLE_ASSIGNMENT((#554404)); +#554404 = SURFACE_STYLE_USAGE(.BOTH.,#554405); +#554405 = SURFACE_SIDE_STYLE('',(#554406)); +#554406 = SURFACE_STYLE_FILL_AREA(#554407); +#554407 = FILL_AREA_STYLE('',(#554408)); +#554408 = FILL_AREA_STYLE_COLOUR('',#551103); +#554409 = OVER_RIDING_STYLED_ITEM('overriding color',(#554410),#144375, + #552994); +#554410 = PRESENTATION_STYLE_ASSIGNMENT((#554411)); +#554411 = SURFACE_STYLE_USAGE(.BOTH.,#554412); +#554412 = SURFACE_SIDE_STYLE('',(#554413)); +#554413 = SURFACE_STYLE_FILL_AREA(#554414); +#554414 = FILL_AREA_STYLE('',(#554415)); +#554415 = FILL_AREA_STYLE_COLOUR('',#551103); +#554416 = OVER_RIDING_STYLED_ITEM('overriding color',(#554417),#144399, + #552994); +#554417 = PRESENTATION_STYLE_ASSIGNMENT((#554418)); +#554418 = SURFACE_STYLE_USAGE(.BOTH.,#554419); +#554419 = SURFACE_SIDE_STYLE('',(#554420)); +#554420 = SURFACE_STYLE_FILL_AREA(#554421); +#554421 = FILL_AREA_STYLE('',(#554422)); +#554422 = FILL_AREA_STYLE_COLOUR('',#551103); +#554423 = OVER_RIDING_STYLED_ITEM('overriding color',(#554424),#144455, + #552994); +#554424 = PRESENTATION_STYLE_ASSIGNMENT((#554425)); +#554425 = SURFACE_STYLE_USAGE(.BOTH.,#554426); +#554426 = SURFACE_SIDE_STYLE('',(#554427)); +#554427 = SURFACE_STYLE_FILL_AREA(#554428); +#554428 = FILL_AREA_STYLE('',(#554429)); +#554429 = FILL_AREA_STYLE_COLOUR('',#551103); +#554430 = OVER_RIDING_STYLED_ITEM('overriding color',(#554431),#144472, + #552994); +#554431 = PRESENTATION_STYLE_ASSIGNMENT((#554432)); +#554432 = SURFACE_STYLE_USAGE(.BOTH.,#554433); +#554433 = SURFACE_SIDE_STYLE('',(#554434)); +#554434 = SURFACE_STYLE_FILL_AREA(#554435); +#554435 = FILL_AREA_STYLE('',(#554436)); +#554436 = FILL_AREA_STYLE_COLOUR('',#551103); +#554437 = OVER_RIDING_STYLED_ITEM('overriding color',(#554438),#144496, + #552994); +#554438 = PRESENTATION_STYLE_ASSIGNMENT((#554439)); +#554439 = SURFACE_STYLE_USAGE(.BOTH.,#554440); +#554440 = SURFACE_SIDE_STYLE('',(#554441)); +#554441 = SURFACE_STYLE_FILL_AREA(#554442); +#554442 = FILL_AREA_STYLE('',(#554443)); +#554443 = FILL_AREA_STYLE_COLOUR('',#551103); +#554444 = OVER_RIDING_STYLED_ITEM('overriding color',(#554445),#144513, + #552994); +#554445 = PRESENTATION_STYLE_ASSIGNMENT((#554446)); +#554446 = SURFACE_STYLE_USAGE(.BOTH.,#554447); +#554447 = SURFACE_SIDE_STYLE('',(#554448)); +#554448 = SURFACE_STYLE_FILL_AREA(#554449); +#554449 = FILL_AREA_STYLE('',(#554450)); +#554450 = FILL_AREA_STYLE_COLOUR('',#551103); +#554451 = OVER_RIDING_STYLED_ITEM('overriding color',(#554452),#144530, + #552994); +#554452 = PRESENTATION_STYLE_ASSIGNMENT((#554453)); +#554453 = SURFACE_STYLE_USAGE(.BOTH.,#554454); +#554454 = SURFACE_SIDE_STYLE('',(#554455)); +#554455 = SURFACE_STYLE_FILL_AREA(#554456); +#554456 = FILL_AREA_STYLE('',(#554457)); +#554457 = FILL_AREA_STYLE_COLOUR('',#551103); +#554458 = OVER_RIDING_STYLED_ITEM('overriding color',(#554459),#144542, + #552994); +#554459 = PRESENTATION_STYLE_ASSIGNMENT((#554460)); +#554460 = SURFACE_STYLE_USAGE(.BOTH.,#554461); +#554461 = SURFACE_SIDE_STYLE('',(#554462)); +#554462 = SURFACE_STYLE_FILL_AREA(#554463); +#554463 = FILL_AREA_STYLE('',(#554464)); +#554464 = FILL_AREA_STYLE_COLOUR('',#551103); +#554465 = OVER_RIDING_STYLED_ITEM('overriding color',(#554466),#144559, + #552994); +#554466 = PRESENTATION_STYLE_ASSIGNMENT((#554467)); +#554467 = SURFACE_STYLE_USAGE(.BOTH.,#554468); +#554468 = SURFACE_SIDE_STYLE('',(#554469)); +#554469 = SURFACE_STYLE_FILL_AREA(#554470); +#554470 = FILL_AREA_STYLE('',(#554471)); +#554471 = FILL_AREA_STYLE_COLOUR('',#551103); +#554472 = OVER_RIDING_STYLED_ITEM('overriding color',(#554473),#144583, + #552994); +#554473 = PRESENTATION_STYLE_ASSIGNMENT((#554474)); +#554474 = SURFACE_STYLE_USAGE(.BOTH.,#554475); +#554475 = SURFACE_SIDE_STYLE('',(#554476)); +#554476 = SURFACE_STYLE_FILL_AREA(#554477); +#554477 = FILL_AREA_STYLE('',(#554478)); +#554478 = FILL_AREA_STYLE_COLOUR('',#551103); +#554479 = OVER_RIDING_STYLED_ITEM('overriding color',(#554480),#144600, + #552994); +#554480 = PRESENTATION_STYLE_ASSIGNMENT((#554481)); +#554481 = SURFACE_STYLE_USAGE(.BOTH.,#554482); +#554482 = SURFACE_SIDE_STYLE('',(#554483)); +#554483 = SURFACE_STYLE_FILL_AREA(#554484); +#554484 = FILL_AREA_STYLE('',(#554485)); +#554485 = FILL_AREA_STYLE_COLOUR('',#551103); +#554486 = OVER_RIDING_STYLED_ITEM('overriding color',(#554487),#144619, + #552994); +#554487 = PRESENTATION_STYLE_ASSIGNMENT((#554488)); +#554488 = SURFACE_STYLE_USAGE(.BOTH.,#554489); +#554489 = SURFACE_SIDE_STYLE('',(#554490)); +#554490 = SURFACE_STYLE_FILL_AREA(#554491); +#554491 = FILL_AREA_STYLE('',(#554492)); +#554492 = FILL_AREA_STYLE_COLOUR('',#551103); +#554493 = OVER_RIDING_STYLED_ITEM('overriding color',(#554494),#144631, + #552994); +#554494 = PRESENTATION_STYLE_ASSIGNMENT((#554495)); +#554495 = SURFACE_STYLE_USAGE(.BOTH.,#554496); +#554496 = SURFACE_SIDE_STYLE('',(#554497)); +#554497 = SURFACE_STYLE_FILL_AREA(#554498); +#554498 = FILL_AREA_STYLE('',(#554499)); +#554499 = FILL_AREA_STYLE_COLOUR('',#551103); +#554500 = OVER_RIDING_STYLED_ITEM('overriding color',(#554501),#144648, + #552994); +#554501 = PRESENTATION_STYLE_ASSIGNMENT((#554502)); +#554502 = SURFACE_STYLE_USAGE(.BOTH.,#554503); +#554503 = SURFACE_SIDE_STYLE('',(#554504)); +#554504 = SURFACE_STYLE_FILL_AREA(#554505); +#554505 = FILL_AREA_STYLE('',(#554506)); +#554506 = FILL_AREA_STYLE_COLOUR('',#551103); +#554507 = OVER_RIDING_STYLED_ITEM('overriding color',(#554508),#144660, + #552994); +#554508 = PRESENTATION_STYLE_ASSIGNMENT((#554509)); +#554509 = SURFACE_STYLE_USAGE(.BOTH.,#554510); +#554510 = SURFACE_SIDE_STYLE('',(#554511)); +#554511 = SURFACE_STYLE_FILL_AREA(#554512); +#554512 = FILL_AREA_STYLE('',(#554513)); +#554513 = FILL_AREA_STYLE_COLOUR('',#506663); +#554514 = OVER_RIDING_STYLED_ITEM('overriding color',(#554515),#144854, + #552994); +#554515 = PRESENTATION_STYLE_ASSIGNMENT((#554516)); +#554516 = SURFACE_STYLE_USAGE(.BOTH.,#554517); +#554517 = SURFACE_SIDE_STYLE('',(#554518)); +#554518 = SURFACE_STYLE_FILL_AREA(#554519); +#554519 = FILL_AREA_STYLE('',(#554520)); +#554520 = FILL_AREA_STYLE_COLOUR('',#506663); +#554521 = OVER_RIDING_STYLED_ITEM('overriding color',(#554522),#144868, + #552994); +#554522 = PRESENTATION_STYLE_ASSIGNMENT((#554523)); +#554523 = SURFACE_STYLE_USAGE(.BOTH.,#554524); +#554524 = SURFACE_SIDE_STYLE('',(#554525)); +#554525 = SURFACE_STYLE_FILL_AREA(#554526); +#554526 = FILL_AREA_STYLE('',(#554527)); +#554527 = FILL_AREA_STYLE_COLOUR('',#506663); +#554528 = OVER_RIDING_STYLED_ITEM('overriding color',(#554529),#144890, + #552994); +#554529 = PRESENTATION_STYLE_ASSIGNMENT((#554530)); +#554530 = SURFACE_STYLE_USAGE(.BOTH.,#554531); +#554531 = SURFACE_SIDE_STYLE('',(#554532)); +#554532 = SURFACE_STYLE_FILL_AREA(#554533); +#554533 = FILL_AREA_STYLE('',(#554534)); +#554534 = FILL_AREA_STYLE_COLOUR('',#506663); +#554535 = OVER_RIDING_STYLED_ITEM('overriding color',(#554536),#144975, + #552994); +#554536 = PRESENTATION_STYLE_ASSIGNMENT((#554537)); +#554537 = SURFACE_STYLE_USAGE(.BOTH.,#554538); +#554538 = SURFACE_SIDE_STYLE('',(#554539)); +#554539 = SURFACE_STYLE_FILL_AREA(#554540); +#554540 = FILL_AREA_STYLE('',(#554541)); +#554541 = FILL_AREA_STYLE_COLOUR('',#506663); +#554542 = OVER_RIDING_STYLED_ITEM('overriding color',(#554543),#144994, + #552994); +#554543 = PRESENTATION_STYLE_ASSIGNMENT((#554544)); +#554544 = SURFACE_STYLE_USAGE(.BOTH.,#554545); +#554545 = SURFACE_SIDE_STYLE('',(#554546)); +#554546 = SURFACE_STYLE_FILL_AREA(#554547); +#554547 = FILL_AREA_STYLE('',(#554548)); +#554548 = FILL_AREA_STYLE_COLOUR('',#506663); +#554549 = OVER_RIDING_STYLED_ITEM('overriding color',(#554550),#145079, + #552994); +#554550 = PRESENTATION_STYLE_ASSIGNMENT((#554551)); +#554551 = SURFACE_STYLE_USAGE(.BOTH.,#554552); +#554552 = SURFACE_SIDE_STYLE('',(#554553)); +#554553 = SURFACE_STYLE_FILL_AREA(#554554); +#554554 = FILL_AREA_STYLE('',(#554555)); +#554555 = FILL_AREA_STYLE_COLOUR('',#506663); +#554556 = OVER_RIDING_STYLED_ITEM('overriding color',(#554557),#145096, + #552994); +#554557 = PRESENTATION_STYLE_ASSIGNMENT((#554558)); +#554558 = SURFACE_STYLE_USAGE(.BOTH.,#554559); +#554559 = SURFACE_SIDE_STYLE('',(#554560)); +#554560 = SURFACE_STYLE_FILL_AREA(#554561); +#554561 = FILL_AREA_STYLE('',(#554562)); +#554562 = FILL_AREA_STYLE_COLOUR('',#506663); +#554563 = OVER_RIDING_STYLED_ITEM('overriding color',(#554564),#145181, + #552994); +#554564 = PRESENTATION_STYLE_ASSIGNMENT((#554565)); +#554565 = SURFACE_STYLE_USAGE(.BOTH.,#554566); +#554566 = SURFACE_SIDE_STYLE('',(#554567)); +#554567 = SURFACE_STYLE_FILL_AREA(#554568); +#554568 = FILL_AREA_STYLE('',(#554569)); +#554569 = FILL_AREA_STYLE_COLOUR('',#506663); +#554570 = OVER_RIDING_STYLED_ITEM('overriding color',(#554571),#145200, + #552994); +#554571 = PRESENTATION_STYLE_ASSIGNMENT((#554572)); +#554572 = SURFACE_STYLE_USAGE(.BOTH.,#554573); +#554573 = SURFACE_SIDE_STYLE('',(#554574)); +#554574 = SURFACE_STYLE_FILL_AREA(#554575); +#554575 = FILL_AREA_STYLE('',(#554576)); +#554576 = FILL_AREA_STYLE_COLOUR('',#506663); +#554577 = OVER_RIDING_STYLED_ITEM('overriding color',(#554578),#145280, + #552994); +#554578 = PRESENTATION_STYLE_ASSIGNMENT((#554579)); +#554579 = SURFACE_STYLE_USAGE(.BOTH.,#554580); +#554580 = SURFACE_SIDE_STYLE('',(#554581)); +#554581 = SURFACE_STYLE_FILL_AREA(#554582); +#554582 = FILL_AREA_STYLE('',(#554583)); +#554583 = FILL_AREA_STYLE_COLOUR('',#551103); +#554584 = OVER_RIDING_STYLED_ITEM('overriding color',(#554585),#145292, + #552994); +#554585 = PRESENTATION_STYLE_ASSIGNMENT((#554586)); +#554586 = SURFACE_STYLE_USAGE(.BOTH.,#554587); +#554587 = SURFACE_SIDE_STYLE('',(#554588)); +#554588 = SURFACE_STYLE_FILL_AREA(#554589); +#554589 = FILL_AREA_STYLE('',(#554590)); +#554590 = FILL_AREA_STYLE_COLOUR('',#546242); +#554591 = OVER_RIDING_STYLED_ITEM('overriding color',(#554592),#145323, + #552994); +#554592 = PRESENTATION_STYLE_ASSIGNMENT((#554593)); +#554593 = SURFACE_STYLE_USAGE(.BOTH.,#554594); +#554594 = SURFACE_SIDE_STYLE('',(#554595)); +#554595 = SURFACE_STYLE_FILL_AREA(#554596); +#554596 = FILL_AREA_STYLE('',(#554597)); +#554597 = FILL_AREA_STYLE_COLOUR('',#546242); +#554598 = OVER_RIDING_STYLED_ITEM('overriding color',(#554599),#145354, + #552994); +#554599 = PRESENTATION_STYLE_ASSIGNMENT((#554600)); +#554600 = SURFACE_STYLE_USAGE(.BOTH.,#554601); +#554601 = SURFACE_SIDE_STYLE('',(#554602)); +#554602 = SURFACE_STYLE_FILL_AREA(#554603); +#554603 = FILL_AREA_STYLE('',(#554604)); +#554604 = FILL_AREA_STYLE_COLOUR('',#546242); +#554605 = OVER_RIDING_STYLED_ITEM('overriding color',(#554606),#145387, + #552994); +#554606 = PRESENTATION_STYLE_ASSIGNMENT((#554607)); +#554607 = SURFACE_STYLE_USAGE(.BOTH.,#554608); +#554608 = SURFACE_SIDE_STYLE('',(#554609)); +#554609 = SURFACE_STYLE_FILL_AREA(#554610); +#554610 = FILL_AREA_STYLE('',(#554611)); +#554611 = FILL_AREA_STYLE_COLOUR('',#546242); +#554612 = OVER_RIDING_STYLED_ITEM('overriding color',(#554613),#145418, + #552994); +#554613 = PRESENTATION_STYLE_ASSIGNMENT((#554614)); +#554614 = SURFACE_STYLE_USAGE(.BOTH.,#554615); +#554615 = SURFACE_SIDE_STYLE('',(#554616)); +#554616 = SURFACE_STYLE_FILL_AREA(#554617); +#554617 = FILL_AREA_STYLE('',(#554618)); +#554618 = FILL_AREA_STYLE_COLOUR('',#546242); +#554619 = OVER_RIDING_STYLED_ITEM('overriding color',(#554620),#145442, + #552994); +#554620 = PRESENTATION_STYLE_ASSIGNMENT((#554621)); +#554621 = SURFACE_STYLE_USAGE(.BOTH.,#554622); +#554622 = SURFACE_SIDE_STYLE('',(#554623)); +#554623 = SURFACE_STYLE_FILL_AREA(#554624); +#554624 = FILL_AREA_STYLE('',(#554625)); +#554625 = FILL_AREA_STYLE_COLOUR('',#546242); +#554626 = OVER_RIDING_STYLED_ITEM('overriding color',(#554627),#145454, + #552994); +#554627 = PRESENTATION_STYLE_ASSIGNMENT((#554628)); +#554628 = SURFACE_STYLE_USAGE(.BOTH.,#554629); +#554629 = SURFACE_SIDE_STYLE('',(#554630)); +#554630 = SURFACE_STYLE_FILL_AREA(#554631); +#554631 = FILL_AREA_STYLE('',(#554632)); +#554632 = FILL_AREA_STYLE_COLOUR('',#546242); +#554633 = OVER_RIDING_STYLED_ITEM('overriding color',(#554634),#145494, + #552994); +#554634 = PRESENTATION_STYLE_ASSIGNMENT((#554635)); +#554635 = SURFACE_STYLE_USAGE(.BOTH.,#554636); +#554636 = SURFACE_SIDE_STYLE('',(#554637)); +#554637 = SURFACE_STYLE_FILL_AREA(#554638); +#554638 = FILL_AREA_STYLE('',(#554639)); +#554639 = FILL_AREA_STYLE_COLOUR('',#546242); +#554640 = OVER_RIDING_STYLED_ITEM('overriding color',(#554641),#145534, + #552994); +#554641 = PRESENTATION_STYLE_ASSIGNMENT((#554642)); +#554642 = SURFACE_STYLE_USAGE(.BOTH.,#554643); +#554643 = SURFACE_SIDE_STYLE('',(#554644)); +#554644 = SURFACE_STYLE_FILL_AREA(#554645); +#554645 = FILL_AREA_STYLE('',(#554646)); +#554646 = FILL_AREA_STYLE_COLOUR('',#546242); +#554647 = OVER_RIDING_STYLED_ITEM('overriding color',(#554648),#145574, + #552994); +#554648 = PRESENTATION_STYLE_ASSIGNMENT((#554649)); +#554649 = SURFACE_STYLE_USAGE(.BOTH.,#554650); +#554650 = SURFACE_SIDE_STYLE('',(#554651)); +#554651 = SURFACE_STYLE_FILL_AREA(#554652); +#554652 = FILL_AREA_STYLE('',(#554653)); +#554653 = FILL_AREA_STYLE_COLOUR('',#546242); +#554654 = OVER_RIDING_STYLED_ITEM('overriding color',(#554655),#145605, + #552994); +#554655 = PRESENTATION_STYLE_ASSIGNMENT((#554656)); +#554656 = SURFACE_STYLE_USAGE(.BOTH.,#554657); +#554657 = SURFACE_SIDE_STYLE('',(#554658)); +#554658 = SURFACE_STYLE_FILL_AREA(#554659); +#554659 = FILL_AREA_STYLE('',(#554660)); +#554660 = FILL_AREA_STYLE_COLOUR('',#546242); +#554661 = OVER_RIDING_STYLED_ITEM('overriding color',(#554662),#145636, + #552994); +#554662 = PRESENTATION_STYLE_ASSIGNMENT((#554663)); +#554663 = SURFACE_STYLE_USAGE(.BOTH.,#554664); +#554664 = SURFACE_SIDE_STYLE('',(#554665)); +#554665 = SURFACE_STYLE_FILL_AREA(#554666); +#554666 = FILL_AREA_STYLE('',(#554667)); +#554667 = FILL_AREA_STYLE_COLOUR('',#546242); +#554668 = OVER_RIDING_STYLED_ITEM('overriding color',(#554669),#145660, + #552994); +#554669 = PRESENTATION_STYLE_ASSIGNMENT((#554670)); +#554670 = SURFACE_STYLE_USAGE(.BOTH.,#554671); +#554671 = SURFACE_SIDE_STYLE('',(#554672)); +#554672 = SURFACE_STYLE_FILL_AREA(#554673); +#554673 = FILL_AREA_STYLE('',(#554674)); +#554674 = FILL_AREA_STYLE_COLOUR('',#546242); +#554675 = OVER_RIDING_STYLED_ITEM('overriding color',(#554676),#145684, + #552994); +#554676 = PRESENTATION_STYLE_ASSIGNMENT((#554677)); +#554677 = SURFACE_STYLE_USAGE(.BOTH.,#554678); +#554678 = SURFACE_SIDE_STYLE('',(#554679)); +#554679 = SURFACE_STYLE_FILL_AREA(#554680); +#554680 = FILL_AREA_STYLE('',(#554681)); +#554681 = FILL_AREA_STYLE_COLOUR('',#546242); +#554682 = OVER_RIDING_STYLED_ITEM('overriding color',(#554683),#145696, + #552994); +#554683 = PRESENTATION_STYLE_ASSIGNMENT((#554684)); +#554684 = SURFACE_STYLE_USAGE(.BOTH.,#554685); +#554685 = SURFACE_SIDE_STYLE('',(#554686)); +#554686 = SURFACE_STYLE_FILL_AREA(#554687); +#554687 = FILL_AREA_STYLE('',(#554688)); +#554688 = FILL_AREA_STYLE_COLOUR('',#546242); +#554689 = OVER_RIDING_STYLED_ITEM('overriding color',(#554690),#145708, + #552994); +#554690 = PRESENTATION_STYLE_ASSIGNMENT((#554691)); +#554691 = SURFACE_STYLE_USAGE(.BOTH.,#554692); +#554692 = SURFACE_SIDE_STYLE('',(#554693)); +#554693 = SURFACE_STYLE_FILL_AREA(#554694); +#554694 = FILL_AREA_STYLE('',(#554695)); +#554695 = FILL_AREA_STYLE_COLOUR('',#546242); +#554696 = OVER_RIDING_STYLED_ITEM('overriding color',(#554697),#145739, + #552994); +#554697 = PRESENTATION_STYLE_ASSIGNMENT((#554698)); +#554698 = SURFACE_STYLE_USAGE(.BOTH.,#554699); +#554699 = SURFACE_SIDE_STYLE('',(#554700)); +#554700 = SURFACE_STYLE_FILL_AREA(#554701); +#554701 = FILL_AREA_STYLE('',(#554702)); +#554702 = FILL_AREA_STYLE_COLOUR('',#546242); +#554703 = OVER_RIDING_STYLED_ITEM('overriding color',(#554704),#145770, + #552994); +#554704 = PRESENTATION_STYLE_ASSIGNMENT((#554705)); +#554705 = SURFACE_STYLE_USAGE(.BOTH.,#554706); +#554706 = SURFACE_SIDE_STYLE('',(#554707)); +#554707 = SURFACE_STYLE_FILL_AREA(#554708); +#554708 = FILL_AREA_STYLE('',(#554709)); +#554709 = FILL_AREA_STYLE_COLOUR('',#546242); +#554710 = OVER_RIDING_STYLED_ITEM('overriding color',(#554711),#145794, + #552994); +#554711 = PRESENTATION_STYLE_ASSIGNMENT((#554712)); +#554712 = SURFACE_STYLE_USAGE(.BOTH.,#554713); +#554713 = SURFACE_SIDE_STYLE('',(#554714)); +#554714 = SURFACE_STYLE_FILL_AREA(#554715); +#554715 = FILL_AREA_STYLE('',(#554716)); +#554716 = FILL_AREA_STYLE_COLOUR('',#546242); +#554717 = OVER_RIDING_STYLED_ITEM('overriding color',(#554718),#145818, + #552994); +#554718 = PRESENTATION_STYLE_ASSIGNMENT((#554719)); +#554719 = SURFACE_STYLE_USAGE(.BOTH.,#554720); +#554720 = SURFACE_SIDE_STYLE('',(#554721)); +#554721 = SURFACE_STYLE_FILL_AREA(#554722); +#554722 = FILL_AREA_STYLE('',(#554723)); +#554723 = FILL_AREA_STYLE_COLOUR('',#546242); +#554724 = OVER_RIDING_STYLED_ITEM('overriding color',(#554725),#145830, + #552994); +#554725 = PRESENTATION_STYLE_ASSIGNMENT((#554726)); +#554726 = SURFACE_STYLE_USAGE(.BOTH.,#554727); +#554727 = SURFACE_SIDE_STYLE('',(#554728)); +#554728 = SURFACE_STYLE_FILL_AREA(#554729); +#554729 = FILL_AREA_STYLE('',(#554730)); +#554730 = FILL_AREA_STYLE_COLOUR('',#546242); +#554731 = OVER_RIDING_STYLED_ITEM('overriding color',(#554732),#145842, + #552994); +#554732 = PRESENTATION_STYLE_ASSIGNMENT((#554733)); +#554733 = SURFACE_STYLE_USAGE(.BOTH.,#554734); +#554734 = SURFACE_SIDE_STYLE('',(#554735)); +#554735 = SURFACE_STYLE_FILL_AREA(#554736); +#554736 = FILL_AREA_STYLE('',(#554737)); +#554737 = FILL_AREA_STYLE_COLOUR('',#546242); +#554738 = OVER_RIDING_STYLED_ITEM('overriding color',(#554739),#145873, + #552994); +#554739 = PRESENTATION_STYLE_ASSIGNMENT((#554740)); +#554740 = SURFACE_STYLE_USAGE(.BOTH.,#554741); +#554741 = SURFACE_SIDE_STYLE('',(#554742)); +#554742 = SURFACE_STYLE_FILL_AREA(#554743); +#554743 = FILL_AREA_STYLE('',(#554744)); +#554744 = FILL_AREA_STYLE_COLOUR('',#546242); +#554745 = OVER_RIDING_STYLED_ITEM('overriding color',(#554746),#145904, + #552994); +#554746 = PRESENTATION_STYLE_ASSIGNMENT((#554747)); +#554747 = SURFACE_STYLE_USAGE(.BOTH.,#554748); +#554748 = SURFACE_SIDE_STYLE('',(#554749)); +#554749 = SURFACE_STYLE_FILL_AREA(#554750); +#554750 = FILL_AREA_STYLE('',(#554751)); +#554751 = FILL_AREA_STYLE_COLOUR('',#546242); +#554752 = OVER_RIDING_STYLED_ITEM('overriding color',(#554753),#145928, + #552994); +#554753 = PRESENTATION_STYLE_ASSIGNMENT((#554754)); +#554754 = SURFACE_STYLE_USAGE(.BOTH.,#554755); +#554755 = SURFACE_SIDE_STYLE('',(#554756)); +#554756 = SURFACE_STYLE_FILL_AREA(#554757); +#554757 = FILL_AREA_STYLE('',(#554758)); +#554758 = FILL_AREA_STYLE_COLOUR('',#546242); +#554759 = OVER_RIDING_STYLED_ITEM('overriding color',(#554760),#145952, + #552994); +#554760 = PRESENTATION_STYLE_ASSIGNMENT((#554761)); +#554761 = SURFACE_STYLE_USAGE(.BOTH.,#554762); +#554762 = SURFACE_SIDE_STYLE('',(#554763)); +#554763 = SURFACE_STYLE_FILL_AREA(#554764); +#554764 = FILL_AREA_STYLE('',(#554765)); +#554765 = FILL_AREA_STYLE_COLOUR('',#546242); +#554766 = OVER_RIDING_STYLED_ITEM('overriding color',(#554767),#145964, + #552994); +#554767 = PRESENTATION_STYLE_ASSIGNMENT((#554768)); +#554768 = SURFACE_STYLE_USAGE(.BOTH.,#554769); +#554769 = SURFACE_SIDE_STYLE('',(#554770)); +#554770 = SURFACE_STYLE_FILL_AREA(#554771); +#554771 = FILL_AREA_STYLE('',(#554772)); +#554772 = FILL_AREA_STYLE_COLOUR('',#546242); +#554773 = OVER_RIDING_STYLED_ITEM('overriding color',(#554774),#145976, + #552994); +#554774 = PRESENTATION_STYLE_ASSIGNMENT((#554775)); +#554775 = SURFACE_STYLE_USAGE(.BOTH.,#554776); +#554776 = SURFACE_SIDE_STYLE('',(#554777)); +#554777 = SURFACE_STYLE_FILL_AREA(#554778); +#554778 = FILL_AREA_STYLE('',(#554779)); +#554779 = FILL_AREA_STYLE_COLOUR('',#546242); +#554780 = OVER_RIDING_STYLED_ITEM('overriding color',(#554781),#145988, + #552994); +#554781 = PRESENTATION_STYLE_ASSIGNMENT((#554782)); +#554782 = SURFACE_STYLE_USAGE(.BOTH.,#554783); +#554783 = SURFACE_SIDE_STYLE('',(#554784)); +#554784 = SURFACE_STYLE_FILL_AREA(#554785); +#554785 = FILL_AREA_STYLE('',(#554786)); +#554786 = FILL_AREA_STYLE_COLOUR('',#521053); +#554787 = OVER_RIDING_STYLED_ITEM('overriding color',(#554788),#146005, + #552994); +#554788 = PRESENTATION_STYLE_ASSIGNMENT((#554789)); +#554789 = SURFACE_STYLE_USAGE(.BOTH.,#554790); +#554790 = SURFACE_SIDE_STYLE('',(#554791)); +#554791 = SURFACE_STYLE_FILL_AREA(#554792); +#554792 = FILL_AREA_STYLE('',(#554793)); +#554793 = FILL_AREA_STYLE_COLOUR('',#521053); +#554794 = OVER_RIDING_STYLED_ITEM('overriding color',(#554795),#146022, + #552994); +#554795 = PRESENTATION_STYLE_ASSIGNMENT((#554796)); +#554796 = SURFACE_STYLE_USAGE(.BOTH.,#554797); +#554797 = SURFACE_SIDE_STYLE('',(#554798)); +#554798 = SURFACE_STYLE_FILL_AREA(#554799); +#554799 = FILL_AREA_STYLE('',(#554800)); +#554800 = FILL_AREA_STYLE_COLOUR('',#521053); +#554801 = OVER_RIDING_STYLED_ITEM('overriding color',(#554802),#146039, + #552994); +#554802 = PRESENTATION_STYLE_ASSIGNMENT((#554803)); +#554803 = SURFACE_STYLE_USAGE(.BOTH.,#554804); +#554804 = SURFACE_SIDE_STYLE('',(#554805)); +#554805 = SURFACE_STYLE_FILL_AREA(#554806); +#554806 = FILL_AREA_STYLE('',(#554807)); +#554807 = FILL_AREA_STYLE_COLOUR('',#521053); +#554808 = OVER_RIDING_STYLED_ITEM('overriding color',(#554809),#146056, + #552994); +#554809 = PRESENTATION_STYLE_ASSIGNMENT((#554810)); +#554810 = SURFACE_STYLE_USAGE(.BOTH.,#554811); +#554811 = SURFACE_SIDE_STYLE('',(#554812)); +#554812 = SURFACE_STYLE_FILL_AREA(#554813); +#554813 = FILL_AREA_STYLE('',(#554814)); +#554814 = FILL_AREA_STYLE_COLOUR('',#521053); +#554815 = OVER_RIDING_STYLED_ITEM('overriding color',(#554816),#146068, + #552994); +#554816 = PRESENTATION_STYLE_ASSIGNMENT((#554817)); +#554817 = SURFACE_STYLE_USAGE(.BOTH.,#554818); +#554818 = SURFACE_SIDE_STYLE('',(#554819)); +#554819 = SURFACE_STYLE_FILL_AREA(#554820); +#554820 = FILL_AREA_STYLE('',(#554821)); +#554821 = FILL_AREA_STYLE_COLOUR('',#521053); +#554822 = OVER_RIDING_STYLED_ITEM('overriding color',(#554823),#146090, + #552994); +#554823 = PRESENTATION_STYLE_ASSIGNMENT((#554824)); +#554824 = SURFACE_STYLE_USAGE(.BOTH.,#554825); +#554825 = SURFACE_SIDE_STYLE('',(#554826)); +#554826 = SURFACE_STYLE_FILL_AREA(#554827); +#554827 = FILL_AREA_STYLE('',(#554828)); +#554828 = FILL_AREA_STYLE_COLOUR('',#521053); +#554829 = OVER_RIDING_STYLED_ITEM('overriding color',(#554830),#146107, + #552994); +#554830 = PRESENTATION_STYLE_ASSIGNMENT((#554831)); +#554831 = SURFACE_STYLE_USAGE(.BOTH.,#554832); +#554832 = SURFACE_SIDE_STYLE('',(#554833)); +#554833 = SURFACE_STYLE_FILL_AREA(#554834); +#554834 = FILL_AREA_STYLE('',(#554835)); +#554835 = FILL_AREA_STYLE_COLOUR('',#521053); +#554836 = OVER_RIDING_STYLED_ITEM('overriding color',(#554837),#146124, + #552994); +#554837 = PRESENTATION_STYLE_ASSIGNMENT((#554838)); +#554838 = SURFACE_STYLE_USAGE(.BOTH.,#554839); +#554839 = SURFACE_SIDE_STYLE('',(#554840)); +#554840 = SURFACE_STYLE_FILL_AREA(#554841); +#554841 = FILL_AREA_STYLE('',(#554842)); +#554842 = FILL_AREA_STYLE_COLOUR('',#521053); +#554843 = OVER_RIDING_STYLED_ITEM('overriding color',(#554844),#146141, + #552994); +#554844 = PRESENTATION_STYLE_ASSIGNMENT((#554845)); +#554845 = SURFACE_STYLE_USAGE(.BOTH.,#554846); +#554846 = SURFACE_SIDE_STYLE('',(#554847)); +#554847 = SURFACE_STYLE_FILL_AREA(#554848); +#554848 = FILL_AREA_STYLE('',(#554849)); +#554849 = FILL_AREA_STYLE_COLOUR('',#521053); +#554850 = OVER_RIDING_STYLED_ITEM('overriding color',(#554851),#146158, + #552994); +#554851 = PRESENTATION_STYLE_ASSIGNMENT((#554852)); +#554852 = SURFACE_STYLE_USAGE(.BOTH.,#554853); +#554853 = SURFACE_SIDE_STYLE('',(#554854)); +#554854 = SURFACE_STYLE_FILL_AREA(#554855); +#554855 = FILL_AREA_STYLE('',(#554856)); +#554856 = FILL_AREA_STYLE_COLOUR('',#521053); +#554857 = OVER_RIDING_STYLED_ITEM('overriding color',(#554858),#146175, + #552994); +#554858 = PRESENTATION_STYLE_ASSIGNMENT((#554859)); +#554859 = SURFACE_STYLE_USAGE(.BOTH.,#554860); +#554860 = SURFACE_SIDE_STYLE('',(#554861)); +#554861 = SURFACE_STYLE_FILL_AREA(#554862); +#554862 = FILL_AREA_STYLE('',(#554863)); +#554863 = FILL_AREA_STYLE_COLOUR('',#521053); +#554864 = OVER_RIDING_STYLED_ITEM('overriding color',(#554865),#146192, + #552994); +#554865 = PRESENTATION_STYLE_ASSIGNMENT((#554866)); +#554866 = SURFACE_STYLE_USAGE(.BOTH.,#554867); +#554867 = SURFACE_SIDE_STYLE('',(#554868)); +#554868 = SURFACE_STYLE_FILL_AREA(#554869); +#554869 = FILL_AREA_STYLE('',(#554870)); +#554870 = FILL_AREA_STYLE_COLOUR('',#521053); +#554871 = OVER_RIDING_STYLED_ITEM('overriding color',(#554872),#146209, + #552994); +#554872 = PRESENTATION_STYLE_ASSIGNMENT((#554873)); +#554873 = SURFACE_STYLE_USAGE(.BOTH.,#554874); +#554874 = SURFACE_SIDE_STYLE('',(#554875)); +#554875 = SURFACE_STYLE_FILL_AREA(#554876); +#554876 = FILL_AREA_STYLE('',(#554877)); +#554877 = FILL_AREA_STYLE_COLOUR('',#521053); +#554878 = OVER_RIDING_STYLED_ITEM('overriding color',(#554879),#146226, + #552994); +#554879 = PRESENTATION_STYLE_ASSIGNMENT((#554880)); +#554880 = SURFACE_STYLE_USAGE(.BOTH.,#554881); +#554881 = SURFACE_SIDE_STYLE('',(#554882)); +#554882 = SURFACE_STYLE_FILL_AREA(#554883); +#554883 = FILL_AREA_STYLE('',(#554884)); +#554884 = FILL_AREA_STYLE_COLOUR('',#521053); +#554885 = OVER_RIDING_STYLED_ITEM('overriding color',(#554886),#146243, + #552994); +#554886 = PRESENTATION_STYLE_ASSIGNMENT((#554887)); +#554887 = SURFACE_STYLE_USAGE(.BOTH.,#554888); +#554888 = SURFACE_SIDE_STYLE('',(#554889)); +#554889 = SURFACE_STYLE_FILL_AREA(#554890); +#554890 = FILL_AREA_STYLE('',(#554891)); +#554891 = FILL_AREA_STYLE_COLOUR('',#521053); +#554892 = OVER_RIDING_STYLED_ITEM('overriding color',(#554893),#146260, + #552994); +#554893 = PRESENTATION_STYLE_ASSIGNMENT((#554894)); +#554894 = SURFACE_STYLE_USAGE(.BOTH.,#554895); +#554895 = SURFACE_SIDE_STYLE('',(#554896)); +#554896 = SURFACE_STYLE_FILL_AREA(#554897); +#554897 = FILL_AREA_STYLE('',(#554898)); +#554898 = FILL_AREA_STYLE_COLOUR('',#521053); +#554899 = OVER_RIDING_STYLED_ITEM('overriding color',(#554900),#146277, + #552994); +#554900 = PRESENTATION_STYLE_ASSIGNMENT((#554901)); +#554901 = SURFACE_STYLE_USAGE(.BOTH.,#554902); +#554902 = SURFACE_SIDE_STYLE('',(#554903)); +#554903 = SURFACE_STYLE_FILL_AREA(#554904); +#554904 = FILL_AREA_STYLE('',(#554905)); +#554905 = FILL_AREA_STYLE_COLOUR('',#521053); +#554906 = OVER_RIDING_STYLED_ITEM('overriding color',(#554907),#146294, + #552994); +#554907 = PRESENTATION_STYLE_ASSIGNMENT((#554908)); +#554908 = SURFACE_STYLE_USAGE(.BOTH.,#554909); +#554909 = SURFACE_SIDE_STYLE('',(#554910)); +#554910 = SURFACE_STYLE_FILL_AREA(#554911); +#554911 = FILL_AREA_STYLE('',(#554912)); +#554912 = FILL_AREA_STYLE_COLOUR('',#521053); +#554913 = OVER_RIDING_STYLED_ITEM('overriding color',(#554914),#146311, + #552994); +#554914 = PRESENTATION_STYLE_ASSIGNMENT((#554915)); +#554915 = SURFACE_STYLE_USAGE(.BOTH.,#554916); +#554916 = SURFACE_SIDE_STYLE('',(#554917)); +#554917 = SURFACE_STYLE_FILL_AREA(#554918); +#554918 = FILL_AREA_STYLE('',(#554919)); +#554919 = FILL_AREA_STYLE_COLOUR('',#521053); +#554920 = OVER_RIDING_STYLED_ITEM('overriding color',(#554921),#146328, + #552994); +#554921 = PRESENTATION_STYLE_ASSIGNMENT((#554922)); +#554922 = SURFACE_STYLE_USAGE(.BOTH.,#554923); +#554923 = SURFACE_SIDE_STYLE('',(#554924)); +#554924 = SURFACE_STYLE_FILL_AREA(#554925); +#554925 = FILL_AREA_STYLE('',(#554926)); +#554926 = FILL_AREA_STYLE_COLOUR('',#521053); +#554927 = OVER_RIDING_STYLED_ITEM('overriding color',(#554928),#146345, + #552994); +#554928 = PRESENTATION_STYLE_ASSIGNMENT((#554929)); +#554929 = SURFACE_STYLE_USAGE(.BOTH.,#554930); +#554930 = SURFACE_SIDE_STYLE('',(#554931)); +#554931 = SURFACE_STYLE_FILL_AREA(#554932); +#554932 = FILL_AREA_STYLE('',(#554933)); +#554933 = FILL_AREA_STYLE_COLOUR('',#521053); +#554934 = OVER_RIDING_STYLED_ITEM('overriding color',(#554935),#146362, + #552994); +#554935 = PRESENTATION_STYLE_ASSIGNMENT((#554936)); +#554936 = SURFACE_STYLE_USAGE(.BOTH.,#554937); +#554937 = SURFACE_SIDE_STYLE('',(#554938)); +#554938 = SURFACE_STYLE_FILL_AREA(#554939); +#554939 = FILL_AREA_STYLE('',(#554940)); +#554940 = FILL_AREA_STYLE_COLOUR('',#521053); +#554941 = OVER_RIDING_STYLED_ITEM('overriding color',(#554942),#146379, + #552994); +#554942 = PRESENTATION_STYLE_ASSIGNMENT((#554943)); +#554943 = SURFACE_STYLE_USAGE(.BOTH.,#554944); +#554944 = SURFACE_SIDE_STYLE('',(#554945)); +#554945 = SURFACE_STYLE_FILL_AREA(#554946); +#554946 = FILL_AREA_STYLE('',(#554947)); +#554947 = FILL_AREA_STYLE_COLOUR('',#521053); +#554948 = OVER_RIDING_STYLED_ITEM('overriding color',(#554949),#146396, + #552994); +#554949 = PRESENTATION_STYLE_ASSIGNMENT((#554950)); +#554950 = SURFACE_STYLE_USAGE(.BOTH.,#554951); +#554951 = SURFACE_SIDE_STYLE('',(#554952)); +#554952 = SURFACE_STYLE_FILL_AREA(#554953); +#554953 = FILL_AREA_STYLE('',(#554954)); +#554954 = FILL_AREA_STYLE_COLOUR('',#521053); +#554955 = OVER_RIDING_STYLED_ITEM('overriding color',(#554956),#146413, + #552994); +#554956 = PRESENTATION_STYLE_ASSIGNMENT((#554957)); +#554957 = SURFACE_STYLE_USAGE(.BOTH.,#554958); +#554958 = SURFACE_SIDE_STYLE('',(#554959)); +#554959 = SURFACE_STYLE_FILL_AREA(#554960); +#554960 = FILL_AREA_STYLE('',(#554961)); +#554961 = FILL_AREA_STYLE_COLOUR('',#521053); +#554962 = OVER_RIDING_STYLED_ITEM('overriding color',(#554963),#146430, + #552994); +#554963 = PRESENTATION_STYLE_ASSIGNMENT((#554964)); +#554964 = SURFACE_STYLE_USAGE(.BOTH.,#554965); +#554965 = SURFACE_SIDE_STYLE('',(#554966)); +#554966 = SURFACE_STYLE_FILL_AREA(#554967); +#554967 = FILL_AREA_STYLE('',(#554968)); +#554968 = FILL_AREA_STYLE_COLOUR('',#521053); +#554969 = OVER_RIDING_STYLED_ITEM('overriding color',(#554970),#146447, + #552994); +#554970 = PRESENTATION_STYLE_ASSIGNMENT((#554971)); +#554971 = SURFACE_STYLE_USAGE(.BOTH.,#554972); +#554972 = SURFACE_SIDE_STYLE('',(#554973)); +#554973 = SURFACE_STYLE_FILL_AREA(#554974); +#554974 = FILL_AREA_STYLE('',(#554975)); +#554975 = FILL_AREA_STYLE_COLOUR('',#521053); +#554976 = OVER_RIDING_STYLED_ITEM('overriding color',(#554977),#146464, + #552994); +#554977 = PRESENTATION_STYLE_ASSIGNMENT((#554978)); +#554978 = SURFACE_STYLE_USAGE(.BOTH.,#554979); +#554979 = SURFACE_SIDE_STYLE('',(#554980)); +#554980 = SURFACE_STYLE_FILL_AREA(#554981); +#554981 = FILL_AREA_STYLE('',(#554982)); +#554982 = FILL_AREA_STYLE_COLOUR('',#521053); +#554983 = OVER_RIDING_STYLED_ITEM('overriding color',(#554984),#146481, + #552994); +#554984 = PRESENTATION_STYLE_ASSIGNMENT((#554985)); +#554985 = SURFACE_STYLE_USAGE(.BOTH.,#554986); +#554986 = SURFACE_SIDE_STYLE('',(#554987)); +#554987 = SURFACE_STYLE_FILL_AREA(#554988); +#554988 = FILL_AREA_STYLE('',(#554989)); +#554989 = FILL_AREA_STYLE_COLOUR('',#521053); +#554990 = OVER_RIDING_STYLED_ITEM('overriding color',(#554991),#146498, + #552994); +#554991 = PRESENTATION_STYLE_ASSIGNMENT((#554992)); +#554992 = SURFACE_STYLE_USAGE(.BOTH.,#554993); +#554993 = SURFACE_SIDE_STYLE('',(#554994)); +#554994 = SURFACE_STYLE_FILL_AREA(#554995); +#554995 = FILL_AREA_STYLE('',(#554996)); +#554996 = FILL_AREA_STYLE_COLOUR('',#521053); +#554997 = OVER_RIDING_STYLED_ITEM('overriding color',(#554998),#146515, + #552994); +#554998 = PRESENTATION_STYLE_ASSIGNMENT((#554999)); +#554999 = SURFACE_STYLE_USAGE(.BOTH.,#555000); +#555000 = SURFACE_SIDE_STYLE('',(#555001)); +#555001 = SURFACE_STYLE_FILL_AREA(#555002); +#555002 = FILL_AREA_STYLE('',(#555003)); +#555003 = FILL_AREA_STYLE_COLOUR('',#521053); +#555004 = OVER_RIDING_STYLED_ITEM('overriding color',(#555005),#146532, + #552994); +#555005 = PRESENTATION_STYLE_ASSIGNMENT((#555006)); +#555006 = SURFACE_STYLE_USAGE(.BOTH.,#555007); +#555007 = SURFACE_SIDE_STYLE('',(#555008)); +#555008 = SURFACE_STYLE_FILL_AREA(#555009); +#555009 = FILL_AREA_STYLE('',(#555010)); +#555010 = FILL_AREA_STYLE_COLOUR('',#521053); +#555011 = OVER_RIDING_STYLED_ITEM('overriding color',(#555012),#146549, + #552994); +#555012 = PRESENTATION_STYLE_ASSIGNMENT((#555013)); +#555013 = SURFACE_STYLE_USAGE(.BOTH.,#555014); +#555014 = SURFACE_SIDE_STYLE('',(#555015)); +#555015 = SURFACE_STYLE_FILL_AREA(#555016); +#555016 = FILL_AREA_STYLE('',(#555017)); +#555017 = FILL_AREA_STYLE_COLOUR('',#521053); +#555018 = OVER_RIDING_STYLED_ITEM('overriding color',(#555019),#146566, + #552994); +#555019 = PRESENTATION_STYLE_ASSIGNMENT((#555020)); +#555020 = SURFACE_STYLE_USAGE(.BOTH.,#555021); +#555021 = SURFACE_SIDE_STYLE('',(#555022)); +#555022 = SURFACE_STYLE_FILL_AREA(#555023); +#555023 = FILL_AREA_STYLE('',(#555024)); +#555024 = FILL_AREA_STYLE_COLOUR('',#521053); +#555025 = OVER_RIDING_STYLED_ITEM('overriding color',(#555026),#146583, + #552994); +#555026 = PRESENTATION_STYLE_ASSIGNMENT((#555027)); +#555027 = SURFACE_STYLE_USAGE(.BOTH.,#555028); +#555028 = SURFACE_SIDE_STYLE('',(#555029)); +#555029 = SURFACE_STYLE_FILL_AREA(#555030); +#555030 = FILL_AREA_STYLE('',(#555031)); +#555031 = FILL_AREA_STYLE_COLOUR('',#521053); +#555032 = OVER_RIDING_STYLED_ITEM('overriding color',(#555033),#146600, + #552994); +#555033 = PRESENTATION_STYLE_ASSIGNMENT((#555034)); +#555034 = SURFACE_STYLE_USAGE(.BOTH.,#555035); +#555035 = SURFACE_SIDE_STYLE('',(#555036)); +#555036 = SURFACE_STYLE_FILL_AREA(#555037); +#555037 = FILL_AREA_STYLE('',(#555038)); +#555038 = FILL_AREA_STYLE_COLOUR('',#521053); +#555039 = OVER_RIDING_STYLED_ITEM('overriding color',(#555040),#146617, + #552994); +#555040 = PRESENTATION_STYLE_ASSIGNMENT((#555041)); +#555041 = SURFACE_STYLE_USAGE(.BOTH.,#555042); +#555042 = SURFACE_SIDE_STYLE('',(#555043)); +#555043 = SURFACE_STYLE_FILL_AREA(#555044); +#555044 = FILL_AREA_STYLE('',(#555045)); +#555045 = FILL_AREA_STYLE_COLOUR('',#521053); +#555046 = OVER_RIDING_STYLED_ITEM('overriding color',(#555047),#146634, + #552994); +#555047 = PRESENTATION_STYLE_ASSIGNMENT((#555048)); +#555048 = SURFACE_STYLE_USAGE(.BOTH.,#555049); +#555049 = SURFACE_SIDE_STYLE('',(#555050)); +#555050 = SURFACE_STYLE_FILL_AREA(#555051); +#555051 = FILL_AREA_STYLE('',(#555052)); +#555052 = FILL_AREA_STYLE_COLOUR('',#521053); +#555053 = OVER_RIDING_STYLED_ITEM('overriding color',(#555054),#146651, + #552994); +#555054 = PRESENTATION_STYLE_ASSIGNMENT((#555055)); +#555055 = SURFACE_STYLE_USAGE(.BOTH.,#555056); +#555056 = SURFACE_SIDE_STYLE('',(#555057)); +#555057 = SURFACE_STYLE_FILL_AREA(#555058); +#555058 = FILL_AREA_STYLE('',(#555059)); +#555059 = FILL_AREA_STYLE_COLOUR('',#521053); +#555060 = OVER_RIDING_STYLED_ITEM('overriding color',(#555061),#146668, + #552994); +#555061 = PRESENTATION_STYLE_ASSIGNMENT((#555062)); +#555062 = SURFACE_STYLE_USAGE(.BOTH.,#555063); +#555063 = SURFACE_SIDE_STYLE('',(#555064)); +#555064 = SURFACE_STYLE_FILL_AREA(#555065); +#555065 = FILL_AREA_STYLE('',(#555066)); +#555066 = FILL_AREA_STYLE_COLOUR('',#521053); +#555067 = OVER_RIDING_STYLED_ITEM('overriding color',(#555068),#146685, + #552994); +#555068 = PRESENTATION_STYLE_ASSIGNMENT((#555069)); +#555069 = SURFACE_STYLE_USAGE(.BOTH.,#555070); +#555070 = SURFACE_SIDE_STYLE('',(#555071)); +#555071 = SURFACE_STYLE_FILL_AREA(#555072); +#555072 = FILL_AREA_STYLE('',(#555073)); +#555073 = FILL_AREA_STYLE_COLOUR('',#521053); +#555074 = OVER_RIDING_STYLED_ITEM('overriding color',(#555075),#146702, + #552994); +#555075 = PRESENTATION_STYLE_ASSIGNMENT((#555076)); +#555076 = SURFACE_STYLE_USAGE(.BOTH.,#555077); +#555077 = SURFACE_SIDE_STYLE('',(#555078)); +#555078 = SURFACE_STYLE_FILL_AREA(#555079); +#555079 = FILL_AREA_STYLE('',(#555080)); +#555080 = FILL_AREA_STYLE_COLOUR('',#521053); +#555081 = OVER_RIDING_STYLED_ITEM('overriding color',(#555082),#146719, + #552994); +#555082 = PRESENTATION_STYLE_ASSIGNMENT((#555083)); +#555083 = SURFACE_STYLE_USAGE(.BOTH.,#555084); +#555084 = SURFACE_SIDE_STYLE('',(#555085)); +#555085 = SURFACE_STYLE_FILL_AREA(#555086); +#555086 = FILL_AREA_STYLE('',(#555087)); +#555087 = FILL_AREA_STYLE_COLOUR('',#521053); +#555088 = OVER_RIDING_STYLED_ITEM('overriding color',(#555089),#146736, + #552994); +#555089 = PRESENTATION_STYLE_ASSIGNMENT((#555090)); +#555090 = SURFACE_STYLE_USAGE(.BOTH.,#555091); +#555091 = SURFACE_SIDE_STYLE('',(#555092)); +#555092 = SURFACE_STYLE_FILL_AREA(#555093); +#555093 = FILL_AREA_STYLE('',(#555094)); +#555094 = FILL_AREA_STYLE_COLOUR('',#521053); +#555095 = OVER_RIDING_STYLED_ITEM('overriding color',(#555096),#146748, + #552994); +#555096 = PRESENTATION_STYLE_ASSIGNMENT((#555097)); +#555097 = SURFACE_STYLE_USAGE(.BOTH.,#555098); +#555098 = SURFACE_SIDE_STYLE('',(#555099)); +#555099 = SURFACE_STYLE_FILL_AREA(#555100); +#555100 = FILL_AREA_STYLE('',(#555101)); +#555101 = FILL_AREA_STYLE_COLOUR('',#521053); +#555102 = OVER_RIDING_STYLED_ITEM('overriding color',(#555103),#146770, + #552994); +#555103 = PRESENTATION_STYLE_ASSIGNMENT((#555104)); +#555104 = SURFACE_STYLE_USAGE(.BOTH.,#555105); +#555105 = SURFACE_SIDE_STYLE('',(#555106)); +#555106 = SURFACE_STYLE_FILL_AREA(#555107); +#555107 = FILL_AREA_STYLE('',(#555108)); +#555108 = FILL_AREA_STYLE_COLOUR('',#521053); +#555109 = OVER_RIDING_STYLED_ITEM('overriding color',(#555110),#146787, + #552994); +#555110 = PRESENTATION_STYLE_ASSIGNMENT((#555111)); +#555111 = SURFACE_STYLE_USAGE(.BOTH.,#555112); +#555112 = SURFACE_SIDE_STYLE('',(#555113)); +#555113 = SURFACE_STYLE_FILL_AREA(#555114); +#555114 = FILL_AREA_STYLE('',(#555115)); +#555115 = FILL_AREA_STYLE_COLOUR('',#521053); +#555116 = OVER_RIDING_STYLED_ITEM('overriding color',(#555117),#146804, + #552994); +#555117 = PRESENTATION_STYLE_ASSIGNMENT((#555118)); +#555118 = SURFACE_STYLE_USAGE(.BOTH.,#555119); +#555119 = SURFACE_SIDE_STYLE('',(#555120)); +#555120 = SURFACE_STYLE_FILL_AREA(#555121); +#555121 = FILL_AREA_STYLE('',(#555122)); +#555122 = FILL_AREA_STYLE_COLOUR('',#521053); +#555123 = OVER_RIDING_STYLED_ITEM('overriding color',(#555124),#146821, + #552994); +#555124 = PRESENTATION_STYLE_ASSIGNMENT((#555125)); +#555125 = SURFACE_STYLE_USAGE(.BOTH.,#555126); +#555126 = SURFACE_SIDE_STYLE('',(#555127)); +#555127 = SURFACE_STYLE_FILL_AREA(#555128); +#555128 = FILL_AREA_STYLE('',(#555129)); +#555129 = FILL_AREA_STYLE_COLOUR('',#521053); +#555130 = OVER_RIDING_STYLED_ITEM('overriding color',(#555131),#146838, + #552994); +#555131 = PRESENTATION_STYLE_ASSIGNMENT((#555132)); +#555132 = SURFACE_STYLE_USAGE(.BOTH.,#555133); +#555133 = SURFACE_SIDE_STYLE('',(#555134)); +#555134 = SURFACE_STYLE_FILL_AREA(#555135); +#555135 = FILL_AREA_STYLE('',(#555136)); +#555136 = FILL_AREA_STYLE_COLOUR('',#521053); +#555137 = OVER_RIDING_STYLED_ITEM('overriding color',(#555138),#146855, + #552994); +#555138 = PRESENTATION_STYLE_ASSIGNMENT((#555139)); +#555139 = SURFACE_STYLE_USAGE(.BOTH.,#555140); +#555140 = SURFACE_SIDE_STYLE('',(#555141)); +#555141 = SURFACE_STYLE_FILL_AREA(#555142); +#555142 = FILL_AREA_STYLE('',(#555143)); +#555143 = FILL_AREA_STYLE_COLOUR('',#521053); +#555144 = OVER_RIDING_STYLED_ITEM('overriding color',(#555145),#146872, + #552994); +#555145 = PRESENTATION_STYLE_ASSIGNMENT((#555146)); +#555146 = SURFACE_STYLE_USAGE(.BOTH.,#555147); +#555147 = SURFACE_SIDE_STYLE('',(#555148)); +#555148 = SURFACE_STYLE_FILL_AREA(#555149); +#555149 = FILL_AREA_STYLE('',(#555150)); +#555150 = FILL_AREA_STYLE_COLOUR('',#521053); +#555151 = OVER_RIDING_STYLED_ITEM('overriding color',(#555152),#146889, + #552994); +#555152 = PRESENTATION_STYLE_ASSIGNMENT((#555153)); +#555153 = SURFACE_STYLE_USAGE(.BOTH.,#555154); +#555154 = SURFACE_SIDE_STYLE('',(#555155)); +#555155 = SURFACE_STYLE_FILL_AREA(#555156); +#555156 = FILL_AREA_STYLE('',(#555157)); +#555157 = FILL_AREA_STYLE_COLOUR('',#521053); +#555158 = OVER_RIDING_STYLED_ITEM('overriding color',(#555159),#146906, + #552994); +#555159 = PRESENTATION_STYLE_ASSIGNMENT((#555160)); +#555160 = SURFACE_STYLE_USAGE(.BOTH.,#555161); +#555161 = SURFACE_SIDE_STYLE('',(#555162)); +#555162 = SURFACE_STYLE_FILL_AREA(#555163); +#555163 = FILL_AREA_STYLE('',(#555164)); +#555164 = FILL_AREA_STYLE_COLOUR('',#521053); +#555165 = OVER_RIDING_STYLED_ITEM('overriding color',(#555166),#146923, + #552994); +#555166 = PRESENTATION_STYLE_ASSIGNMENT((#555167)); +#555167 = SURFACE_STYLE_USAGE(.BOTH.,#555168); +#555168 = SURFACE_SIDE_STYLE('',(#555169)); +#555169 = SURFACE_STYLE_FILL_AREA(#555170); +#555170 = FILL_AREA_STYLE('',(#555171)); +#555171 = FILL_AREA_STYLE_COLOUR('',#521053); +#555172 = OVER_RIDING_STYLED_ITEM('overriding color',(#555173),#146940, + #552994); +#555173 = PRESENTATION_STYLE_ASSIGNMENT((#555174)); +#555174 = SURFACE_STYLE_USAGE(.BOTH.,#555175); +#555175 = SURFACE_SIDE_STYLE('',(#555176)); +#555176 = SURFACE_STYLE_FILL_AREA(#555177); +#555177 = FILL_AREA_STYLE('',(#555178)); +#555178 = FILL_AREA_STYLE_COLOUR('',#521053); +#555179 = OVER_RIDING_STYLED_ITEM('overriding color',(#555180),#146952, + #552994); +#555180 = PRESENTATION_STYLE_ASSIGNMENT((#555181)); +#555181 = SURFACE_STYLE_USAGE(.BOTH.,#555182); +#555182 = SURFACE_SIDE_STYLE('',(#555183)); +#555183 = SURFACE_STYLE_FILL_AREA(#555184); +#555184 = FILL_AREA_STYLE('',(#555185)); +#555185 = FILL_AREA_STYLE_COLOUR('',#521053); +#555186 = OVER_RIDING_STYLED_ITEM('overriding color',(#555187),#146974, + #552994); +#555187 = PRESENTATION_STYLE_ASSIGNMENT((#555188)); +#555188 = SURFACE_STYLE_USAGE(.BOTH.,#555189); +#555189 = SURFACE_SIDE_STYLE('',(#555190)); +#555190 = SURFACE_STYLE_FILL_AREA(#555191); +#555191 = FILL_AREA_STYLE('',(#555192)); +#555192 = FILL_AREA_STYLE_COLOUR('',#521053); +#555193 = OVER_RIDING_STYLED_ITEM('overriding color',(#555194),#146991, + #552994); +#555194 = PRESENTATION_STYLE_ASSIGNMENT((#555195)); +#555195 = SURFACE_STYLE_USAGE(.BOTH.,#555196); +#555196 = SURFACE_SIDE_STYLE('',(#555197)); +#555197 = SURFACE_STYLE_FILL_AREA(#555198); +#555198 = FILL_AREA_STYLE('',(#555199)); +#555199 = FILL_AREA_STYLE_COLOUR('',#521053); +#555200 = OVER_RIDING_STYLED_ITEM('overriding color',(#555201),#147008, + #552994); +#555201 = PRESENTATION_STYLE_ASSIGNMENT((#555202)); +#555202 = SURFACE_STYLE_USAGE(.BOTH.,#555203); +#555203 = SURFACE_SIDE_STYLE('',(#555204)); +#555204 = SURFACE_STYLE_FILL_AREA(#555205); +#555205 = FILL_AREA_STYLE('',(#555206)); +#555206 = FILL_AREA_STYLE_COLOUR('',#521053); +#555207 = OVER_RIDING_STYLED_ITEM('overriding color',(#555208),#147025, + #552994); +#555208 = PRESENTATION_STYLE_ASSIGNMENT((#555209)); +#555209 = SURFACE_STYLE_USAGE(.BOTH.,#555210); +#555210 = SURFACE_SIDE_STYLE('',(#555211)); +#555211 = SURFACE_STYLE_FILL_AREA(#555212); +#555212 = FILL_AREA_STYLE('',(#555213)); +#555213 = FILL_AREA_STYLE_COLOUR('',#521053); +#555214 = OVER_RIDING_STYLED_ITEM('overriding color',(#555215),#147042, + #552994); +#555215 = PRESENTATION_STYLE_ASSIGNMENT((#555216)); +#555216 = SURFACE_STYLE_USAGE(.BOTH.,#555217); +#555217 = SURFACE_SIDE_STYLE('',(#555218)); +#555218 = SURFACE_STYLE_FILL_AREA(#555219); +#555219 = FILL_AREA_STYLE('',(#555220)); +#555220 = FILL_AREA_STYLE_COLOUR('',#521053); +#555221 = OVER_RIDING_STYLED_ITEM('overriding color',(#555222),#147059, + #552994); +#555222 = PRESENTATION_STYLE_ASSIGNMENT((#555223)); +#555223 = SURFACE_STYLE_USAGE(.BOTH.,#555224); +#555224 = SURFACE_SIDE_STYLE('',(#555225)); +#555225 = SURFACE_STYLE_FILL_AREA(#555226); +#555226 = FILL_AREA_STYLE('',(#555227)); +#555227 = FILL_AREA_STYLE_COLOUR('',#521053); +#555228 = OVER_RIDING_STYLED_ITEM('overriding color',(#555229),#147076, + #552994); +#555229 = PRESENTATION_STYLE_ASSIGNMENT((#555230)); +#555230 = SURFACE_STYLE_USAGE(.BOTH.,#555231); +#555231 = SURFACE_SIDE_STYLE('',(#555232)); +#555232 = SURFACE_STYLE_FILL_AREA(#555233); +#555233 = FILL_AREA_STYLE('',(#555234)); +#555234 = FILL_AREA_STYLE_COLOUR('',#521053); +#555235 = OVER_RIDING_STYLED_ITEM('overriding color',(#555236),#147093, + #552994); +#555236 = PRESENTATION_STYLE_ASSIGNMENT((#555237)); +#555237 = SURFACE_STYLE_USAGE(.BOTH.,#555238); +#555238 = SURFACE_SIDE_STYLE('',(#555239)); +#555239 = SURFACE_STYLE_FILL_AREA(#555240); +#555240 = FILL_AREA_STYLE('',(#555241)); +#555241 = FILL_AREA_STYLE_COLOUR('',#521053); +#555242 = OVER_RIDING_STYLED_ITEM('overriding color',(#555243),#147110, + #552994); +#555243 = PRESENTATION_STYLE_ASSIGNMENT((#555244)); +#555244 = SURFACE_STYLE_USAGE(.BOTH.,#555245); +#555245 = SURFACE_SIDE_STYLE('',(#555246)); +#555246 = SURFACE_STYLE_FILL_AREA(#555247); +#555247 = FILL_AREA_STYLE('',(#555248)); +#555248 = FILL_AREA_STYLE_COLOUR('',#521053); +#555249 = OVER_RIDING_STYLED_ITEM('overriding color',(#555250),#147127, + #552994); +#555250 = PRESENTATION_STYLE_ASSIGNMENT((#555251)); +#555251 = SURFACE_STYLE_USAGE(.BOTH.,#555252); +#555252 = SURFACE_SIDE_STYLE('',(#555253)); +#555253 = SURFACE_STYLE_FILL_AREA(#555254); +#555254 = FILL_AREA_STYLE('',(#555255)); +#555255 = FILL_AREA_STYLE_COLOUR('',#521053); +#555256 = OVER_RIDING_STYLED_ITEM('overriding color',(#555257),#147144, + #552994); +#555257 = PRESENTATION_STYLE_ASSIGNMENT((#555258)); +#555258 = SURFACE_STYLE_USAGE(.BOTH.,#555259); +#555259 = SURFACE_SIDE_STYLE('',(#555260)); +#555260 = SURFACE_STYLE_FILL_AREA(#555261); +#555261 = FILL_AREA_STYLE('',(#555262)); +#555262 = FILL_AREA_STYLE_COLOUR('',#521053); +#555263 = OVER_RIDING_STYLED_ITEM('overriding color',(#555264),#147161, + #552994); +#555264 = PRESENTATION_STYLE_ASSIGNMENT((#555265)); +#555265 = SURFACE_STYLE_USAGE(.BOTH.,#555266); +#555266 = SURFACE_SIDE_STYLE('',(#555267)); +#555267 = SURFACE_STYLE_FILL_AREA(#555268); +#555268 = FILL_AREA_STYLE('',(#555269)); +#555269 = FILL_AREA_STYLE_COLOUR('',#521053); +#555270 = OVER_RIDING_STYLED_ITEM('overriding color',(#555271),#147178, + #552994); +#555271 = PRESENTATION_STYLE_ASSIGNMENT((#555272)); +#555272 = SURFACE_STYLE_USAGE(.BOTH.,#555273); +#555273 = SURFACE_SIDE_STYLE('',(#555274)); +#555274 = SURFACE_STYLE_FILL_AREA(#555275); +#555275 = FILL_AREA_STYLE('',(#555276)); +#555276 = FILL_AREA_STYLE_COLOUR('',#521053); +#555277 = OVER_RIDING_STYLED_ITEM('overriding color',(#555278),#147190, + #552994); +#555278 = PRESENTATION_STYLE_ASSIGNMENT((#555279)); +#555279 = SURFACE_STYLE_USAGE(.BOTH.,#555280); +#555280 = SURFACE_SIDE_STYLE('',(#555281)); +#555281 = SURFACE_STYLE_FILL_AREA(#555282); +#555282 = FILL_AREA_STYLE('',(#555283)); +#555283 = FILL_AREA_STYLE_COLOUR('',#521053); +#555284 = OVER_RIDING_STYLED_ITEM('overriding color',(#555285),#147212, + #552994); +#555285 = PRESENTATION_STYLE_ASSIGNMENT((#555286)); +#555286 = SURFACE_STYLE_USAGE(.BOTH.,#555287); +#555287 = SURFACE_SIDE_STYLE('',(#555288)); +#555288 = SURFACE_STYLE_FILL_AREA(#555289); +#555289 = FILL_AREA_STYLE('',(#555290)); +#555290 = FILL_AREA_STYLE_COLOUR('',#521053); +#555291 = OVER_RIDING_STYLED_ITEM('overriding color',(#555292),#147229, + #552994); +#555292 = PRESENTATION_STYLE_ASSIGNMENT((#555293)); +#555293 = SURFACE_STYLE_USAGE(.BOTH.,#555294); +#555294 = SURFACE_SIDE_STYLE('',(#555295)); +#555295 = SURFACE_STYLE_FILL_AREA(#555296); +#555296 = FILL_AREA_STYLE('',(#555297)); +#555297 = FILL_AREA_STYLE_COLOUR('',#521053); +#555298 = OVER_RIDING_STYLED_ITEM('overriding color',(#555299),#147246, + #552994); +#555299 = PRESENTATION_STYLE_ASSIGNMENT((#555300)); +#555300 = SURFACE_STYLE_USAGE(.BOTH.,#555301); +#555301 = SURFACE_SIDE_STYLE('',(#555302)); +#555302 = SURFACE_STYLE_FILL_AREA(#555303); +#555303 = FILL_AREA_STYLE('',(#555304)); +#555304 = FILL_AREA_STYLE_COLOUR('',#521053); +#555305 = OVER_RIDING_STYLED_ITEM('overriding color',(#555306),#147263, + #552994); +#555306 = PRESENTATION_STYLE_ASSIGNMENT((#555307)); +#555307 = SURFACE_STYLE_USAGE(.BOTH.,#555308); +#555308 = SURFACE_SIDE_STYLE('',(#555309)); +#555309 = SURFACE_STYLE_FILL_AREA(#555310); +#555310 = FILL_AREA_STYLE('',(#555311)); +#555311 = FILL_AREA_STYLE_COLOUR('',#521053); +#555312 = OVER_RIDING_STYLED_ITEM('overriding color',(#555313),#147280, + #552994); +#555313 = PRESENTATION_STYLE_ASSIGNMENT((#555314)); +#555314 = SURFACE_STYLE_USAGE(.BOTH.,#555315); +#555315 = SURFACE_SIDE_STYLE('',(#555316)); +#555316 = SURFACE_STYLE_FILL_AREA(#555317); +#555317 = FILL_AREA_STYLE('',(#555318)); +#555318 = FILL_AREA_STYLE_COLOUR('',#521053); +#555319 = OVER_RIDING_STYLED_ITEM('overriding color',(#555320),#147297, + #552994); +#555320 = PRESENTATION_STYLE_ASSIGNMENT((#555321)); +#555321 = SURFACE_STYLE_USAGE(.BOTH.,#555322); +#555322 = SURFACE_SIDE_STYLE('',(#555323)); +#555323 = SURFACE_STYLE_FILL_AREA(#555324); +#555324 = FILL_AREA_STYLE('',(#555325)); +#555325 = FILL_AREA_STYLE_COLOUR('',#521053); +#555326 = OVER_RIDING_STYLED_ITEM('overriding color',(#555327),#147314, + #552994); +#555327 = PRESENTATION_STYLE_ASSIGNMENT((#555328)); +#555328 = SURFACE_STYLE_USAGE(.BOTH.,#555329); +#555329 = SURFACE_SIDE_STYLE('',(#555330)); +#555330 = SURFACE_STYLE_FILL_AREA(#555331); +#555331 = FILL_AREA_STYLE('',(#555332)); +#555332 = FILL_AREA_STYLE_COLOUR('',#521053); +#555333 = OVER_RIDING_STYLED_ITEM('overriding color',(#555334),#147331, + #552994); +#555334 = PRESENTATION_STYLE_ASSIGNMENT((#555335)); +#555335 = SURFACE_STYLE_USAGE(.BOTH.,#555336); +#555336 = SURFACE_SIDE_STYLE('',(#555337)); +#555337 = SURFACE_STYLE_FILL_AREA(#555338); +#555338 = FILL_AREA_STYLE('',(#555339)); +#555339 = FILL_AREA_STYLE_COLOUR('',#521053); +#555340 = OVER_RIDING_STYLED_ITEM('overriding color',(#555341),#147348, + #552994); +#555341 = PRESENTATION_STYLE_ASSIGNMENT((#555342)); +#555342 = SURFACE_STYLE_USAGE(.BOTH.,#555343); +#555343 = SURFACE_SIDE_STYLE('',(#555344)); +#555344 = SURFACE_STYLE_FILL_AREA(#555345); +#555345 = FILL_AREA_STYLE('',(#555346)); +#555346 = FILL_AREA_STYLE_COLOUR('',#521053); +#555347 = OVER_RIDING_STYLED_ITEM('overriding color',(#555348),#147365, + #552994); +#555348 = PRESENTATION_STYLE_ASSIGNMENT((#555349)); +#555349 = SURFACE_STYLE_USAGE(.BOTH.,#555350); +#555350 = SURFACE_SIDE_STYLE('',(#555351)); +#555351 = SURFACE_STYLE_FILL_AREA(#555352); +#555352 = FILL_AREA_STYLE('',(#555353)); +#555353 = FILL_AREA_STYLE_COLOUR('',#521053); +#555354 = OVER_RIDING_STYLED_ITEM('overriding color',(#555355),#147382, + #552994); +#555355 = PRESENTATION_STYLE_ASSIGNMENT((#555356)); +#555356 = SURFACE_STYLE_USAGE(.BOTH.,#555357); +#555357 = SURFACE_SIDE_STYLE('',(#555358)); +#555358 = SURFACE_STYLE_FILL_AREA(#555359); +#555359 = FILL_AREA_STYLE('',(#555360)); +#555360 = FILL_AREA_STYLE_COLOUR('',#521053); +#555361 = OVER_RIDING_STYLED_ITEM('overriding color',(#555362),#147394, + #552994); +#555362 = PRESENTATION_STYLE_ASSIGNMENT((#555363)); +#555363 = SURFACE_STYLE_USAGE(.BOTH.,#555364); +#555364 = SURFACE_SIDE_STYLE('',(#555365)); +#555365 = SURFACE_STYLE_FILL_AREA(#555366); +#555366 = FILL_AREA_STYLE('',(#555367)); +#555367 = FILL_AREA_STYLE_COLOUR('',#521053); +#555368 = OVER_RIDING_STYLED_ITEM('overriding color',(#555369),#147416, + #552994); +#555369 = PRESENTATION_STYLE_ASSIGNMENT((#555370)); +#555370 = SURFACE_STYLE_USAGE(.BOTH.,#555371); +#555371 = SURFACE_SIDE_STYLE('',(#555372)); +#555372 = SURFACE_STYLE_FILL_AREA(#555373); +#555373 = FILL_AREA_STYLE('',(#555374)); +#555374 = FILL_AREA_STYLE_COLOUR('',#521053); +#555375 = OVER_RIDING_STYLED_ITEM('overriding color',(#555376),#147433, + #552994); +#555376 = PRESENTATION_STYLE_ASSIGNMENT((#555377)); +#555377 = SURFACE_STYLE_USAGE(.BOTH.,#555378); +#555378 = SURFACE_SIDE_STYLE('',(#555379)); +#555379 = SURFACE_STYLE_FILL_AREA(#555380); +#555380 = FILL_AREA_STYLE('',(#555381)); +#555381 = FILL_AREA_STYLE_COLOUR('',#521053); +#555382 = OVER_RIDING_STYLED_ITEM('overriding color',(#555383),#147450, + #552994); +#555383 = PRESENTATION_STYLE_ASSIGNMENT((#555384)); +#555384 = SURFACE_STYLE_USAGE(.BOTH.,#555385); +#555385 = SURFACE_SIDE_STYLE('',(#555386)); +#555386 = SURFACE_STYLE_FILL_AREA(#555387); +#555387 = FILL_AREA_STYLE('',(#555388)); +#555388 = FILL_AREA_STYLE_COLOUR('',#521053); +#555389 = OVER_RIDING_STYLED_ITEM('overriding color',(#555390),#147467, + #552994); +#555390 = PRESENTATION_STYLE_ASSIGNMENT((#555391)); +#555391 = SURFACE_STYLE_USAGE(.BOTH.,#555392); +#555392 = SURFACE_SIDE_STYLE('',(#555393)); +#555393 = SURFACE_STYLE_FILL_AREA(#555394); +#555394 = FILL_AREA_STYLE('',(#555395)); +#555395 = FILL_AREA_STYLE_COLOUR('',#521053); +#555396 = OVER_RIDING_STYLED_ITEM('overriding color',(#555397),#147484, + #552994); +#555397 = PRESENTATION_STYLE_ASSIGNMENT((#555398)); +#555398 = SURFACE_STYLE_USAGE(.BOTH.,#555399); +#555399 = SURFACE_SIDE_STYLE('',(#555400)); +#555400 = SURFACE_STYLE_FILL_AREA(#555401); +#555401 = FILL_AREA_STYLE('',(#555402)); +#555402 = FILL_AREA_STYLE_COLOUR('',#521053); +#555403 = OVER_RIDING_STYLED_ITEM('overriding color',(#555404),#147501, + #552994); +#555404 = PRESENTATION_STYLE_ASSIGNMENT((#555405)); +#555405 = SURFACE_STYLE_USAGE(.BOTH.,#555406); +#555406 = SURFACE_SIDE_STYLE('',(#555407)); +#555407 = SURFACE_STYLE_FILL_AREA(#555408); +#555408 = FILL_AREA_STYLE('',(#555409)); +#555409 = FILL_AREA_STYLE_COLOUR('',#521053); +#555410 = OVER_RIDING_STYLED_ITEM('overriding color',(#555411),#147518, + #552994); +#555411 = PRESENTATION_STYLE_ASSIGNMENT((#555412)); +#555412 = SURFACE_STYLE_USAGE(.BOTH.,#555413); +#555413 = SURFACE_SIDE_STYLE('',(#555414)); +#555414 = SURFACE_STYLE_FILL_AREA(#555415); +#555415 = FILL_AREA_STYLE('',(#555416)); +#555416 = FILL_AREA_STYLE_COLOUR('',#521053); +#555417 = OVER_RIDING_STYLED_ITEM('overriding color',(#555418),#147530, + #552994); +#555418 = PRESENTATION_STYLE_ASSIGNMENT((#555419)); +#555419 = SURFACE_STYLE_USAGE(.BOTH.,#555420); +#555420 = SURFACE_SIDE_STYLE('',(#555421)); +#555421 = SURFACE_STYLE_FILL_AREA(#555422); +#555422 = FILL_AREA_STYLE('',(#555423)); +#555423 = FILL_AREA_STYLE_COLOUR('',#521053); +#555424 = OVER_RIDING_STYLED_ITEM('overriding color',(#555425),#147552, + #552994); +#555425 = PRESENTATION_STYLE_ASSIGNMENT((#555426)); +#555426 = SURFACE_STYLE_USAGE(.BOTH.,#555427); +#555427 = SURFACE_SIDE_STYLE('',(#555428)); +#555428 = SURFACE_STYLE_FILL_AREA(#555429); +#555429 = FILL_AREA_STYLE('',(#555430)); +#555430 = FILL_AREA_STYLE_COLOUR('',#521053); +#555431 = OVER_RIDING_STYLED_ITEM('overriding color',(#555432),#147569, + #552994); +#555432 = PRESENTATION_STYLE_ASSIGNMENT((#555433)); +#555433 = SURFACE_STYLE_USAGE(.BOTH.,#555434); +#555434 = SURFACE_SIDE_STYLE('',(#555435)); +#555435 = SURFACE_STYLE_FILL_AREA(#555436); +#555436 = FILL_AREA_STYLE('',(#555437)); +#555437 = FILL_AREA_STYLE_COLOUR('',#521053); +#555438 = STYLED_ITEM('color',(#555439),#147581); +#555439 = PRESENTATION_STYLE_ASSIGNMENT((#555440)); +#555440 = SURFACE_STYLE_USAGE(.BOTH.,#555441); +#555441 = SURFACE_SIDE_STYLE('',(#555442)); +#555442 = SURFACE_STYLE_FILL_AREA(#555443); +#555443 = FILL_AREA_STYLE('',(#555444)); +#555444 = FILL_AREA_STYLE_COLOUR('',#521053); +#555445 = OVER_RIDING_STYLED_ITEM('overriding color',(#555446),#147583, + #555438); +#555446 = PRESENTATION_STYLE_ASSIGNMENT((#555447)); +#555447 = SURFACE_STYLE_USAGE(.BOTH.,#555448); +#555448 = SURFACE_SIDE_STYLE('',(#555449)); +#555449 = SURFACE_STYLE_FILL_AREA(#555450); +#555450 = FILL_AREA_STYLE('',(#555451)); +#555451 = FILL_AREA_STYLE_COLOUR('',#553022); +#555452 = OVER_RIDING_STYLED_ITEM('overriding color',(#555453),#147625, + #555438); +#555453 = PRESENTATION_STYLE_ASSIGNMENT((#555454)); +#555454 = SURFACE_STYLE_USAGE(.BOTH.,#555455); +#555455 = SURFACE_SIDE_STYLE('',(#555456)); +#555456 = SURFACE_STYLE_FILL_AREA(#555457); +#555457 = FILL_AREA_STYLE('',(#555458)); +#555458 = FILL_AREA_STYLE_COLOUR('',#553022); +#555459 = OVER_RIDING_STYLED_ITEM('overriding color',(#555460),#147691, + #555438); +#555460 = PRESENTATION_STYLE_ASSIGNMENT((#555461)); +#555461 = SURFACE_STYLE_USAGE(.BOTH.,#555462); +#555462 = SURFACE_SIDE_STYLE('',(#555463)); +#555463 = SURFACE_STYLE_FILL_AREA(#555464); +#555464 = FILL_AREA_STYLE('',(#555465)); +#555465 = FILL_AREA_STYLE_COLOUR('',#553022); +#555466 = OVER_RIDING_STYLED_ITEM('overriding color',(#555467),#147723, + #555438); +#555467 = PRESENTATION_STYLE_ASSIGNMENT((#555468)); +#555468 = SURFACE_STYLE_USAGE(.BOTH.,#555469); +#555469 = SURFACE_SIDE_STYLE('',(#555470)); +#555470 = SURFACE_STYLE_FILL_AREA(#555471); +#555471 = FILL_AREA_STYLE('',(#555472)); +#555472 = FILL_AREA_STYLE_COLOUR('',#553022); +#555473 = OVER_RIDING_STYLED_ITEM('overriding color',(#555474),#147747, + #555438); +#555474 = PRESENTATION_STYLE_ASSIGNMENT((#555475)); +#555475 = SURFACE_STYLE_USAGE(.BOTH.,#555476); +#555476 = SURFACE_SIDE_STYLE('',(#555477)); +#555477 = SURFACE_STYLE_FILL_AREA(#555478); +#555478 = FILL_AREA_STYLE('',(#555479)); +#555479 = FILL_AREA_STYLE_COLOUR('',#553022); +#555480 = OVER_RIDING_STYLED_ITEM('overriding color',(#555481),#147772, + #555438); +#555481 = PRESENTATION_STYLE_ASSIGNMENT((#555482)); +#555482 = SURFACE_STYLE_USAGE(.BOTH.,#555483); +#555483 = SURFACE_SIDE_STYLE('',(#555484)); +#555484 = SURFACE_STYLE_FILL_AREA(#555485); +#555485 = FILL_AREA_STYLE('',(#555486)); +#555486 = FILL_AREA_STYLE_COLOUR('',#551103); +#555487 = OVER_RIDING_STYLED_ITEM('overriding color',(#555488),#147813, + #555438); +#555488 = PRESENTATION_STYLE_ASSIGNMENT((#555489)); +#555489 = SURFACE_STYLE_USAGE(.BOTH.,#555490); +#555490 = SURFACE_SIDE_STYLE('',(#555491)); +#555491 = SURFACE_STYLE_FILL_AREA(#555492); +#555492 = FILL_AREA_STYLE('',(#555493)); +#555493 = FILL_AREA_STYLE_COLOUR('',#551103); +#555494 = OVER_RIDING_STYLED_ITEM('overriding color',(#555495),#147825, + #555438); +#555495 = PRESENTATION_STYLE_ASSIGNMENT((#555496)); +#555496 = SURFACE_STYLE_USAGE(.BOTH.,#555497); +#555497 = SURFACE_SIDE_STYLE('',(#555498)); +#555498 = SURFACE_STYLE_FILL_AREA(#555499); +#555499 = FILL_AREA_STYLE('',(#555500)); +#555500 = FILL_AREA_STYLE_COLOUR('',#553022); +#555501 = OVER_RIDING_STYLED_ITEM('overriding color',(#555502),#147842, + #555438); +#555502 = PRESENTATION_STYLE_ASSIGNMENT((#555503)); +#555503 = SURFACE_STYLE_USAGE(.BOTH.,#555504); +#555504 = SURFACE_SIDE_STYLE('',(#555505)); +#555505 = SURFACE_STYLE_FILL_AREA(#555506); +#555506 = FILL_AREA_STYLE('',(#555507)); +#555507 = FILL_AREA_STYLE_COLOUR('',#553022); +#555508 = OVER_RIDING_STYLED_ITEM('overriding color',(#555509),#147859, + #555438); +#555509 = PRESENTATION_STYLE_ASSIGNMENT((#555510)); +#555510 = SURFACE_STYLE_USAGE(.BOTH.,#555511); +#555511 = SURFACE_SIDE_STYLE('',(#555512)); +#555512 = SURFACE_STYLE_FILL_AREA(#555513); +#555513 = FILL_AREA_STYLE('',(#555514)); +#555514 = FILL_AREA_STYLE_COLOUR('',#553022); +#555515 = STYLED_ITEM('color',(#555516),#147871); +#555516 = PRESENTATION_STYLE_ASSIGNMENT((#555517)); +#555517 = SURFACE_STYLE_USAGE(.BOTH.,#555518); +#555518 = SURFACE_SIDE_STYLE('',(#555519)); +#555519 = SURFACE_STYLE_FILL_AREA(#555520); +#555520 = FILL_AREA_STYLE('',(#555521)); +#555521 = FILL_AREA_STYLE_COLOUR('',#521053); +#555522 = OVER_RIDING_STYLED_ITEM('overriding color',(#555523),#147873, + #555515); +#555523 = PRESENTATION_STYLE_ASSIGNMENT((#555524)); +#555524 = SURFACE_STYLE_USAGE(.BOTH.,#555525); +#555525 = SURFACE_SIDE_STYLE('',(#555526)); +#555526 = SURFACE_STYLE_FILL_AREA(#555527); +#555527 = FILL_AREA_STYLE('',(#555528)); +#555528 = FILL_AREA_STYLE_COLOUR('',#510798); +#555529 = OVER_RIDING_STYLED_ITEM('overriding color',(#555530),#147913, + #555515); +#555530 = PRESENTATION_STYLE_ASSIGNMENT((#555531)); +#555531 = SURFACE_STYLE_USAGE(.BOTH.,#555532); +#555532 = SURFACE_SIDE_STYLE('',(#555533)); +#555533 = SURFACE_STYLE_FILL_AREA(#555534); +#555534 = FILL_AREA_STYLE('',(#555535)); +#555535 = FILL_AREA_STYLE_COLOUR('',#510798); +#555536 = OVER_RIDING_STYLED_ITEM('overriding color',(#555537),#147944, + #555515); +#555537 = PRESENTATION_STYLE_ASSIGNMENT((#555538)); +#555538 = SURFACE_STYLE_USAGE(.BOTH.,#555539); +#555539 = SURFACE_SIDE_STYLE('',(#555540)); +#555540 = SURFACE_STYLE_FILL_AREA(#555541); +#555541 = FILL_AREA_STYLE('',(#555542)); +#555542 = FILL_AREA_STYLE_COLOUR('',#510798); +#555543 = OVER_RIDING_STYLED_ITEM('overriding color',(#555544),#147975, + #555515); +#555544 = PRESENTATION_STYLE_ASSIGNMENT((#555545)); +#555545 = SURFACE_STYLE_USAGE(.BOTH.,#555546); +#555546 = SURFACE_SIDE_STYLE('',(#555547)); +#555547 = SURFACE_STYLE_FILL_AREA(#555548); +#555548 = FILL_AREA_STYLE('',(#555549)); +#555549 = FILL_AREA_STYLE_COLOUR('',#510798); +#555550 = OVER_RIDING_STYLED_ITEM('overriding color',(#555551),#148006, + #555515); +#555551 = PRESENTATION_STYLE_ASSIGNMENT((#555552)); +#555552 = SURFACE_STYLE_USAGE(.BOTH.,#555553); +#555553 = SURFACE_SIDE_STYLE('',(#555554)); +#555554 = SURFACE_STYLE_FILL_AREA(#555555); +#555555 = FILL_AREA_STYLE('',(#555556)); +#555556 = FILL_AREA_STYLE_COLOUR('',#510798); +#555557 = OVER_RIDING_STYLED_ITEM('overriding color',(#555558),#148037, + #555515); +#555558 = PRESENTATION_STYLE_ASSIGNMENT((#555559)); +#555559 = SURFACE_STYLE_USAGE(.BOTH.,#555560); +#555560 = SURFACE_SIDE_STYLE('',(#555561)); +#555561 = SURFACE_STYLE_FILL_AREA(#555562); +#555562 = FILL_AREA_STYLE('',(#555563)); +#555563 = FILL_AREA_STYLE_COLOUR('',#510798); +#555564 = OVER_RIDING_STYLED_ITEM('overriding color',(#555565),#148059, + #555515); +#555565 = PRESENTATION_STYLE_ASSIGNMENT((#555566)); +#555566 = SURFACE_STYLE_USAGE(.BOTH.,#555567); +#555567 = SURFACE_SIDE_STYLE('',(#555568)); +#555568 = SURFACE_STYLE_FILL_AREA(#555569); +#555569 = FILL_AREA_STYLE('',(#555570)); +#555570 = FILL_AREA_STYLE_COLOUR('',#510798); +#555571 = OVER_RIDING_STYLED_ITEM('overriding color',(#555572),#148073, + #555515); +#555572 = PRESENTATION_STYLE_ASSIGNMENT((#555573)); +#555573 = SURFACE_STYLE_USAGE(.BOTH.,#555574); +#555574 = SURFACE_SIDE_STYLE('',(#555575)); +#555575 = SURFACE_STYLE_FILL_AREA(#555576); +#555576 = FILL_AREA_STYLE('',(#555577)); +#555577 = FILL_AREA_STYLE_COLOUR('',#510798); +#555578 = STYLED_ITEM('color',(#555579),#148087); +#555579 = PRESENTATION_STYLE_ASSIGNMENT((#555580)); +#555580 = SURFACE_STYLE_USAGE(.BOTH.,#555581); +#555581 = SURFACE_SIDE_STYLE('',(#555582)); +#555582 = SURFACE_STYLE_FILL_AREA(#555583); +#555583 = FILL_AREA_STYLE('',(#555584)); +#555584 = FILL_AREA_STYLE_COLOUR('',#521053); +#555585 = OVER_RIDING_STYLED_ITEM('overriding color',(#555586),#148089, + #555578); +#555586 = PRESENTATION_STYLE_ASSIGNMENT((#555587)); +#555587 = SURFACE_STYLE_USAGE(.BOTH.,#555588); +#555588 = SURFACE_SIDE_STYLE('',(#555589)); +#555589 = SURFACE_STYLE_FILL_AREA(#555590); +#555590 = FILL_AREA_STYLE('',(#555591)); +#555591 = FILL_AREA_STYLE_COLOUR('',#510798); +#555592 = OVER_RIDING_STYLED_ITEM('overriding color',(#555593),#148135, + #555578); +#555593 = PRESENTATION_STYLE_ASSIGNMENT((#555594)); +#555594 = SURFACE_STYLE_USAGE(.BOTH.,#555595); +#555595 = SURFACE_SIDE_STYLE('',(#555596)); +#555596 = SURFACE_STYLE_FILL_AREA(#555597); +#555597 = FILL_AREA_STYLE('',(#555598)); +#555598 = FILL_AREA_STYLE_COLOUR('',#510798); +#555599 = OVER_RIDING_STYLED_ITEM('overriding color',(#555600),#148166, + #555578); +#555600 = PRESENTATION_STYLE_ASSIGNMENT((#555601)); +#555601 = SURFACE_STYLE_USAGE(.BOTH.,#555602); +#555602 = SURFACE_SIDE_STYLE('',(#555603)); +#555603 = SURFACE_STYLE_FILL_AREA(#555604); +#555604 = FILL_AREA_STYLE('',(#555605)); +#555605 = FILL_AREA_STYLE_COLOUR('',#510798); +#555606 = OVER_RIDING_STYLED_ITEM('overriding color',(#555607),#148203, + #555578); +#555607 = PRESENTATION_STYLE_ASSIGNMENT((#555608)); +#555608 = SURFACE_STYLE_USAGE(.BOTH.,#555609); +#555609 = SURFACE_SIDE_STYLE('',(#555610)); +#555610 = SURFACE_STYLE_FILL_AREA(#555611); +#555611 = FILL_AREA_STYLE('',(#555612)); +#555612 = FILL_AREA_STYLE_COLOUR('',#510798); +#555613 = OVER_RIDING_STYLED_ITEM('overriding color',(#555614),#148240, + #555578); +#555614 = PRESENTATION_STYLE_ASSIGNMENT((#555615)); +#555615 = SURFACE_STYLE_USAGE(.BOTH.,#555616); +#555616 = SURFACE_SIDE_STYLE('',(#555617)); +#555617 = SURFACE_STYLE_FILL_AREA(#555618); +#555618 = FILL_AREA_STYLE('',(#555619)); +#555619 = FILL_AREA_STYLE_COLOUR('',#510798); +#555620 = OVER_RIDING_STYLED_ITEM('overriding color',(#555621),#148277, + #555578); +#555621 = PRESENTATION_STYLE_ASSIGNMENT((#555622)); +#555622 = SURFACE_STYLE_USAGE(.BOTH.,#555623); +#555623 = SURFACE_SIDE_STYLE('',(#555624)); +#555624 = SURFACE_STYLE_FILL_AREA(#555625); +#555625 = FILL_AREA_STYLE('',(#555626)); +#555626 = FILL_AREA_STYLE_COLOUR('',#510798); +#555627 = OVER_RIDING_STYLED_ITEM('overriding color',(#555628),#148314, + #555578); +#555628 = PRESENTATION_STYLE_ASSIGNMENT((#555629)); +#555629 = SURFACE_STYLE_USAGE(.BOTH.,#555630); +#555630 = SURFACE_SIDE_STYLE('',(#555631)); +#555631 = SURFACE_STYLE_FILL_AREA(#555632); +#555632 = FILL_AREA_STYLE('',(#555633)); +#555633 = FILL_AREA_STYLE_COLOUR('',#510798); +#555634 = OVER_RIDING_STYLED_ITEM('overriding color',(#555635),#148351, + #555578); +#555635 = PRESENTATION_STYLE_ASSIGNMENT((#555636)); +#555636 = SURFACE_STYLE_USAGE(.BOTH.,#555637); +#555637 = SURFACE_SIDE_STYLE('',(#555638)); +#555638 = SURFACE_STYLE_FILL_AREA(#555639); +#555639 = FILL_AREA_STYLE('',(#555640)); +#555640 = FILL_AREA_STYLE_COLOUR('',#510798); +#555641 = OVER_RIDING_STYLED_ITEM('overriding color',(#555642),#148388, + #555578); +#555642 = PRESENTATION_STYLE_ASSIGNMENT((#555643)); +#555643 = SURFACE_STYLE_USAGE(.BOTH.,#555644); +#555644 = SURFACE_SIDE_STYLE('',(#555645)); +#555645 = SURFACE_STYLE_FILL_AREA(#555646); +#555646 = FILL_AREA_STYLE('',(#555647)); +#555647 = FILL_AREA_STYLE_COLOUR('',#510798); +#555648 = OVER_RIDING_STYLED_ITEM('overriding color',(#555649),#148419, + #555578); +#555649 = PRESENTATION_STYLE_ASSIGNMENT((#555650)); +#555650 = SURFACE_STYLE_USAGE(.BOTH.,#555651); +#555651 = SURFACE_SIDE_STYLE('',(#555652)); +#555652 = SURFACE_STYLE_FILL_AREA(#555653); +#555653 = FILL_AREA_STYLE('',(#555654)); +#555654 = FILL_AREA_STYLE_COLOUR('',#510798); +#555655 = OVER_RIDING_STYLED_ITEM('overriding color',(#555656),#148456, + #555578); +#555656 = PRESENTATION_STYLE_ASSIGNMENT((#555657)); +#555657 = SURFACE_STYLE_USAGE(.BOTH.,#555658); +#555658 = SURFACE_SIDE_STYLE('',(#555659)); +#555659 = SURFACE_STYLE_FILL_AREA(#555660); +#555660 = FILL_AREA_STYLE('',(#555661)); +#555661 = FILL_AREA_STYLE_COLOUR('',#510798); +#555662 = OVER_RIDING_STYLED_ITEM('overriding color',(#555663),#148493, + #555578); +#555663 = PRESENTATION_STYLE_ASSIGNMENT((#555664)); +#555664 = SURFACE_STYLE_USAGE(.BOTH.,#555665); +#555665 = SURFACE_SIDE_STYLE('',(#555666)); +#555666 = SURFACE_STYLE_FILL_AREA(#555667); +#555667 = FILL_AREA_STYLE('',(#555668)); +#555668 = FILL_AREA_STYLE_COLOUR('',#510798); +#555669 = OVER_RIDING_STYLED_ITEM('overriding color',(#555670),#148530, + #555578); +#555670 = PRESENTATION_STYLE_ASSIGNMENT((#555671)); +#555671 = SURFACE_STYLE_USAGE(.BOTH.,#555672); +#555672 = SURFACE_SIDE_STYLE('',(#555673)); +#555673 = SURFACE_STYLE_FILL_AREA(#555674); +#555674 = FILL_AREA_STYLE('',(#555675)); +#555675 = FILL_AREA_STYLE_COLOUR('',#510798); +#555676 = OVER_RIDING_STYLED_ITEM('overriding color',(#555677),#148567, + #555578); +#555677 = PRESENTATION_STYLE_ASSIGNMENT((#555678)); +#555678 = SURFACE_STYLE_USAGE(.BOTH.,#555679); +#555679 = SURFACE_SIDE_STYLE('',(#555680)); +#555680 = SURFACE_STYLE_FILL_AREA(#555681); +#555681 = FILL_AREA_STYLE('',(#555682)); +#555682 = FILL_AREA_STYLE_COLOUR('',#510798); +#555683 = OVER_RIDING_STYLED_ITEM('overriding color',(#555684),#148595, + #555578); +#555684 = PRESENTATION_STYLE_ASSIGNMENT((#555685)); +#555685 = SURFACE_STYLE_USAGE(.BOTH.,#555686); +#555686 = SURFACE_SIDE_STYLE('',(#555687)); +#555687 = SURFACE_STYLE_FILL_AREA(#555688); +#555688 = FILL_AREA_STYLE('',(#555689)); +#555689 = FILL_AREA_STYLE_COLOUR('',#510798); +#555690 = OVER_RIDING_STYLED_ITEM('overriding color',(#555691),#148617, + #555578); +#555691 = PRESENTATION_STYLE_ASSIGNMENT((#555692)); +#555692 = SURFACE_STYLE_USAGE(.BOTH.,#555693); +#555693 = SURFACE_SIDE_STYLE('',(#555694)); +#555694 = SURFACE_STYLE_FILL_AREA(#555695); +#555695 = FILL_AREA_STYLE('',(#555696)); +#555696 = FILL_AREA_STYLE_COLOUR('',#510798); +#555697 = STYLED_ITEM('color',(#555698),#148639); +#555698 = PRESENTATION_STYLE_ASSIGNMENT((#555699)); +#555699 = SURFACE_STYLE_USAGE(.BOTH.,#555700); +#555700 = SURFACE_SIDE_STYLE('',(#555701)); +#555701 = SURFACE_STYLE_FILL_AREA(#555702); +#555702 = FILL_AREA_STYLE('',(#555703)); +#555703 = FILL_AREA_STYLE_COLOUR('',#521053); +#555704 = OVER_RIDING_STYLED_ITEM('overriding color',(#555705),#148641, + #555697); +#555705 = PRESENTATION_STYLE_ASSIGNMENT((#555706)); +#555706 = SURFACE_STYLE_USAGE(.BOTH.,#555707); +#555707 = SURFACE_SIDE_STYLE('',(#555708)); +#555708 = SURFACE_STYLE_FILL_AREA(#555709); +#555709 = FILL_AREA_STYLE('',(#555710)); +#555710 = FILL_AREA_STYLE_COLOUR('',#510798); +#555711 = OVER_RIDING_STYLED_ITEM('overriding color',(#555712),#148681, + #555697); +#555712 = PRESENTATION_STYLE_ASSIGNMENT((#555713)); +#555713 = SURFACE_STYLE_USAGE(.BOTH.,#555714); +#555714 = SURFACE_SIDE_STYLE('',(#555715)); +#555715 = SURFACE_STYLE_FILL_AREA(#555716); +#555716 = FILL_AREA_STYLE('',(#555717)); +#555717 = FILL_AREA_STYLE_COLOUR('',#510798); +#555718 = OVER_RIDING_STYLED_ITEM('overriding color',(#555719),#148712, + #555697); +#555719 = PRESENTATION_STYLE_ASSIGNMENT((#555720)); +#555720 = SURFACE_STYLE_USAGE(.BOTH.,#555721); +#555721 = SURFACE_SIDE_STYLE('',(#555722)); +#555722 = SURFACE_STYLE_FILL_AREA(#555723); +#555723 = FILL_AREA_STYLE('',(#555724)); +#555724 = FILL_AREA_STYLE_COLOUR('',#510798); +#555725 = OVER_RIDING_STYLED_ITEM('overriding color',(#555726),#148743, + #555697); +#555726 = PRESENTATION_STYLE_ASSIGNMENT((#555727)); +#555727 = SURFACE_STYLE_USAGE(.BOTH.,#555728); +#555728 = SURFACE_SIDE_STYLE('',(#555729)); +#555729 = SURFACE_STYLE_FILL_AREA(#555730); +#555730 = FILL_AREA_STYLE('',(#555731)); +#555731 = FILL_AREA_STYLE_COLOUR('',#510798); +#555732 = OVER_RIDING_STYLED_ITEM('overriding color',(#555733),#148774, + #555697); +#555733 = PRESENTATION_STYLE_ASSIGNMENT((#555734)); +#555734 = SURFACE_STYLE_USAGE(.BOTH.,#555735); +#555735 = SURFACE_SIDE_STYLE('',(#555736)); +#555736 = SURFACE_STYLE_FILL_AREA(#555737); +#555737 = FILL_AREA_STYLE('',(#555738)); +#555738 = FILL_AREA_STYLE_COLOUR('',#510798); +#555739 = OVER_RIDING_STYLED_ITEM('overriding color',(#555740),#148805, + #555697); +#555740 = PRESENTATION_STYLE_ASSIGNMENT((#555741)); +#555741 = SURFACE_STYLE_USAGE(.BOTH.,#555742); +#555742 = SURFACE_SIDE_STYLE('',(#555743)); +#555743 = SURFACE_STYLE_FILL_AREA(#555744); +#555744 = FILL_AREA_STYLE('',(#555745)); +#555745 = FILL_AREA_STYLE_COLOUR('',#510798); +#555746 = OVER_RIDING_STYLED_ITEM('overriding color',(#555747),#148836, + #555697); +#555747 = PRESENTATION_STYLE_ASSIGNMENT((#555748)); +#555748 = SURFACE_STYLE_USAGE(.BOTH.,#555749); +#555749 = SURFACE_SIDE_STYLE('',(#555750)); +#555750 = SURFACE_STYLE_FILL_AREA(#555751); +#555751 = FILL_AREA_STYLE('',(#555752)); +#555752 = FILL_AREA_STYLE_COLOUR('',#510798); +#555753 = OVER_RIDING_STYLED_ITEM('overriding color',(#555754),#148867, + #555697); +#555754 = PRESENTATION_STYLE_ASSIGNMENT((#555755)); +#555755 = SURFACE_STYLE_USAGE(.BOTH.,#555756); +#555756 = SURFACE_SIDE_STYLE('',(#555757)); +#555757 = SURFACE_STYLE_FILL_AREA(#555758); +#555758 = FILL_AREA_STYLE('',(#555759)); +#555759 = FILL_AREA_STYLE_COLOUR('',#510798); +#555760 = OVER_RIDING_STYLED_ITEM('overriding color',(#555761),#148898, + #555697); +#555761 = PRESENTATION_STYLE_ASSIGNMENT((#555762)); +#555762 = SURFACE_STYLE_USAGE(.BOTH.,#555763); +#555763 = SURFACE_SIDE_STYLE('',(#555764)); +#555764 = SURFACE_STYLE_FILL_AREA(#555765); +#555765 = FILL_AREA_STYLE('',(#555766)); +#555766 = FILL_AREA_STYLE_COLOUR('',#510798); +#555767 = OVER_RIDING_STYLED_ITEM('overriding color',(#555768),#148929, + #555697); +#555768 = PRESENTATION_STYLE_ASSIGNMENT((#555769)); +#555769 = SURFACE_STYLE_USAGE(.BOTH.,#555770); +#555770 = SURFACE_SIDE_STYLE('',(#555771)); +#555771 = SURFACE_STYLE_FILL_AREA(#555772); +#555772 = FILL_AREA_STYLE('',(#555773)); +#555773 = FILL_AREA_STYLE_COLOUR('',#510798); +#555774 = OVER_RIDING_STYLED_ITEM('overriding color',(#555775),#148960, + #555697); +#555775 = PRESENTATION_STYLE_ASSIGNMENT((#555776)); +#555776 = SURFACE_STYLE_USAGE(.BOTH.,#555777); +#555777 = SURFACE_SIDE_STYLE('',(#555778)); +#555778 = SURFACE_STYLE_FILL_AREA(#555779); +#555779 = FILL_AREA_STYLE('',(#555780)); +#555780 = FILL_AREA_STYLE_COLOUR('',#510798); +#555781 = OVER_RIDING_STYLED_ITEM('overriding color',(#555782),#148991, + #555697); +#555782 = PRESENTATION_STYLE_ASSIGNMENT((#555783)); +#555783 = SURFACE_STYLE_USAGE(.BOTH.,#555784); +#555784 = SURFACE_SIDE_STYLE('',(#555785)); +#555785 = SURFACE_STYLE_FILL_AREA(#555786); +#555786 = FILL_AREA_STYLE('',(#555787)); +#555787 = FILL_AREA_STYLE_COLOUR('',#510798); +#555788 = OVER_RIDING_STYLED_ITEM('overriding color',(#555789),#149013, + #555697); +#555789 = PRESENTATION_STYLE_ASSIGNMENT((#555790)); +#555790 = SURFACE_STYLE_USAGE(.BOTH.,#555791); +#555791 = SURFACE_SIDE_STYLE('',(#555792)); +#555792 = SURFACE_STYLE_FILL_AREA(#555793); +#555793 = FILL_AREA_STYLE('',(#555794)); +#555794 = FILL_AREA_STYLE_COLOUR('',#510798); +#555795 = OVER_RIDING_STYLED_ITEM('overriding color',(#555796),#149033, + #555697); +#555796 = PRESENTATION_STYLE_ASSIGNMENT((#555797)); +#555797 = SURFACE_STYLE_USAGE(.BOTH.,#555798); +#555798 = SURFACE_SIDE_STYLE('',(#555799)); +#555799 = SURFACE_STYLE_FILL_AREA(#555800); +#555800 = FILL_AREA_STYLE('',(#555801)); +#555801 = FILL_AREA_STYLE_COLOUR('',#510798); +#555802 = STYLED_ITEM('color',(#555803),#149053); +#555803 = PRESENTATION_STYLE_ASSIGNMENT((#555804)); +#555804 = SURFACE_STYLE_USAGE(.BOTH.,#555805); +#555805 = SURFACE_SIDE_STYLE('',(#555806)); +#555806 = SURFACE_STYLE_FILL_AREA(#555807); +#555807 = FILL_AREA_STYLE('',(#555808)); +#555808 = FILL_AREA_STYLE_COLOUR('',#521053); +#555809 = OVER_RIDING_STYLED_ITEM('overriding color',(#555810),#149055, + #555802); +#555810 = PRESENTATION_STYLE_ASSIGNMENT((#555811)); +#555811 = SURFACE_STYLE_USAGE(.BOTH.,#555812); +#555812 = SURFACE_SIDE_STYLE('',(#555813)); +#555813 = SURFACE_STYLE_FILL_AREA(#555814); +#555814 = FILL_AREA_STYLE('',(#555815)); +#555815 = FILL_AREA_STYLE_COLOUR('',#510798); +#555816 = OVER_RIDING_STYLED_ITEM('overriding color',(#555817),#149185, + #555802); +#555817 = PRESENTATION_STYLE_ASSIGNMENT((#555818)); +#555818 = SURFACE_STYLE_USAGE(.BOTH.,#555819); +#555819 = SURFACE_SIDE_STYLE('',(#555820)); +#555820 = SURFACE_STYLE_FILL_AREA(#555821); +#555821 = FILL_AREA_STYLE('',(#555822)); +#555822 = FILL_AREA_STYLE_COLOUR('',#510798); +#555823 = OVER_RIDING_STYLED_ITEM('overriding color',(#555824),#149315, + #555802); +#555824 = PRESENTATION_STYLE_ASSIGNMENT((#555825)); +#555825 = SURFACE_STYLE_USAGE(.BOTH.,#555826); +#555826 = SURFACE_SIDE_STYLE('',(#555827)); +#555827 = SURFACE_STYLE_FILL_AREA(#555828); +#555828 = FILL_AREA_STYLE('',(#555829)); +#555829 = FILL_AREA_STYLE_COLOUR('',#510798); +#555830 = OVER_RIDING_STYLED_ITEM('overriding color',(#555831),#149337, + #555802); +#555831 = PRESENTATION_STYLE_ASSIGNMENT((#555832)); +#555832 = SURFACE_STYLE_USAGE(.BOTH.,#555833); +#555833 = SURFACE_SIDE_STYLE('',(#555834)); +#555834 = SURFACE_STYLE_FILL_AREA(#555835); +#555835 = FILL_AREA_STYLE('',(#555836)); +#555836 = FILL_AREA_STYLE_COLOUR('',#510798); +#555837 = OVER_RIDING_STYLED_ITEM('overriding color',(#555838),#149358, + #555802); +#555838 = PRESENTATION_STYLE_ASSIGNMENT((#555839)); +#555839 = SURFACE_STYLE_USAGE(.BOTH.,#555840); +#555840 = SURFACE_SIDE_STYLE('',(#555841)); +#555841 = SURFACE_STYLE_FILL_AREA(#555842); +#555842 = FILL_AREA_STYLE('',(#555843)); +#555843 = FILL_AREA_STYLE_COLOUR('',#510798); +#555844 = OVER_RIDING_STYLED_ITEM('overriding color',(#555845),#149379, + #555802); +#555845 = PRESENTATION_STYLE_ASSIGNMENT((#555846)); +#555846 = SURFACE_STYLE_USAGE(.BOTH.,#555847); +#555847 = SURFACE_SIDE_STYLE('',(#555848)); +#555848 = SURFACE_STYLE_FILL_AREA(#555849); +#555849 = FILL_AREA_STYLE('',(#555850)); +#555850 = FILL_AREA_STYLE_COLOUR('',#510798); +#555851 = OVER_RIDING_STYLED_ITEM('overriding color',(#555852),#149400, + #555802); +#555852 = PRESENTATION_STYLE_ASSIGNMENT((#555853)); +#555853 = SURFACE_STYLE_USAGE(.BOTH.,#555854); +#555854 = SURFACE_SIDE_STYLE('',(#555855)); +#555855 = SURFACE_STYLE_FILL_AREA(#555856); +#555856 = FILL_AREA_STYLE('',(#555857)); +#555857 = FILL_AREA_STYLE_COLOUR('',#510798); +#555858 = OVER_RIDING_STYLED_ITEM('overriding color',(#555859),#149421, + #555802); +#555859 = PRESENTATION_STYLE_ASSIGNMENT((#555860)); +#555860 = SURFACE_STYLE_USAGE(.BOTH.,#555861); +#555861 = SURFACE_SIDE_STYLE('',(#555862)); +#555862 = SURFACE_STYLE_FILL_AREA(#555863); +#555863 = FILL_AREA_STYLE('',(#555864)); +#555864 = FILL_AREA_STYLE_COLOUR('',#510798); +#555865 = OVER_RIDING_STYLED_ITEM('overriding color',(#555866),#149438, + #555802); +#555866 = PRESENTATION_STYLE_ASSIGNMENT((#555867)); +#555867 = SURFACE_STYLE_USAGE(.BOTH.,#555868); +#555868 = SURFACE_SIDE_STYLE('',(#555869)); +#555869 = SURFACE_STYLE_FILL_AREA(#555870); +#555870 = FILL_AREA_STYLE('',(#555871)); +#555871 = FILL_AREA_STYLE_COLOUR('',#510798); +#555872 = OVER_RIDING_STYLED_ITEM('overriding color',(#555873),#149450, + #555802); +#555873 = PRESENTATION_STYLE_ASSIGNMENT((#555874)); +#555874 = SURFACE_STYLE_USAGE(.BOTH.,#555875); +#555875 = SURFACE_SIDE_STYLE('',(#555876)); +#555876 = SURFACE_STYLE_FILL_AREA(#555877); +#555877 = FILL_AREA_STYLE('',(#555878)); +#555878 = FILL_AREA_STYLE_COLOUR('',#510798); +#555879 = OVER_RIDING_STYLED_ITEM('overriding color',(#555880),#149472, + #555802); +#555880 = PRESENTATION_STYLE_ASSIGNMENT((#555881)); +#555881 = SURFACE_STYLE_USAGE(.BOTH.,#555882); +#555882 = SURFACE_SIDE_STYLE('',(#555883)); +#555883 = SURFACE_STYLE_FILL_AREA(#555884); +#555884 = FILL_AREA_STYLE('',(#555885)); +#555885 = FILL_AREA_STYLE_COLOUR('',#510798); +#555886 = OVER_RIDING_STYLED_ITEM('overriding color',(#555887),#149489, + #555802); +#555887 = PRESENTATION_STYLE_ASSIGNMENT((#555888)); +#555888 = SURFACE_STYLE_USAGE(.BOTH.,#555889); +#555889 = SURFACE_SIDE_STYLE('',(#555890)); +#555890 = SURFACE_STYLE_FILL_AREA(#555891); +#555891 = FILL_AREA_STYLE('',(#555892)); +#555892 = FILL_AREA_STYLE_COLOUR('',#510798); +#555893 = OVER_RIDING_STYLED_ITEM('overriding color',(#555894),#149506, + #555802); +#555894 = PRESENTATION_STYLE_ASSIGNMENT((#555895)); +#555895 = SURFACE_STYLE_USAGE(.BOTH.,#555896); +#555896 = SURFACE_SIDE_STYLE('',(#555897)); +#555897 = SURFACE_STYLE_FILL_AREA(#555898); +#555898 = FILL_AREA_STYLE('',(#555899)); +#555899 = FILL_AREA_STYLE_COLOUR('',#510798); +#555900 = OVER_RIDING_STYLED_ITEM('overriding color',(#555901),#149527, + #555802); +#555901 = PRESENTATION_STYLE_ASSIGNMENT((#555902)); +#555902 = SURFACE_STYLE_USAGE(.BOTH.,#555903); +#555903 = SURFACE_SIDE_STYLE('',(#555904)); +#555904 = SURFACE_STYLE_FILL_AREA(#555905); +#555905 = FILL_AREA_STYLE('',(#555906)); +#555906 = FILL_AREA_STYLE_COLOUR('',#510798); +#555907 = OVER_RIDING_STYLED_ITEM('overriding color',(#555908),#149548, + #555802); +#555908 = PRESENTATION_STYLE_ASSIGNMENT((#555909)); +#555909 = SURFACE_STYLE_USAGE(.BOTH.,#555910); +#555910 = SURFACE_SIDE_STYLE('',(#555911)); +#555911 = SURFACE_STYLE_FILL_AREA(#555912); +#555912 = FILL_AREA_STYLE('',(#555913)); +#555913 = FILL_AREA_STYLE_COLOUR('',#510798); +#555914 = OVER_RIDING_STYLED_ITEM('overriding color',(#555915),#149569, + #555802); +#555915 = PRESENTATION_STYLE_ASSIGNMENT((#555916)); +#555916 = SURFACE_STYLE_USAGE(.BOTH.,#555917); +#555917 = SURFACE_SIDE_STYLE('',(#555918)); +#555918 = SURFACE_STYLE_FILL_AREA(#555919); +#555919 = FILL_AREA_STYLE('',(#555920)); +#555920 = FILL_AREA_STYLE_COLOUR('',#510798); +#555921 = STYLED_ITEM('color',(#555922),#149585); +#555922 = PRESENTATION_STYLE_ASSIGNMENT((#555923)); +#555923 = SURFACE_STYLE_USAGE(.BOTH.,#555924); +#555924 = SURFACE_SIDE_STYLE('',(#555925)); +#555925 = SURFACE_STYLE_FILL_AREA(#555926); +#555926 = FILL_AREA_STYLE('',(#555927)); +#555927 = FILL_AREA_STYLE_COLOUR('',#521053); +#555928 = OVER_RIDING_STYLED_ITEM('overriding color',(#555929),#149587, + #555921); +#555929 = PRESENTATION_STYLE_ASSIGNMENT((#555930)); +#555930 = SURFACE_STYLE_USAGE(.BOTH.,#555931); +#555931 = SURFACE_SIDE_STYLE('',(#555932)); +#555932 = SURFACE_STYLE_FILL_AREA(#555933); +#555933 = FILL_AREA_STYLE('',(#555934)); +#555934 = FILL_AREA_STYLE_COLOUR('',#510798); +#555935 = OVER_RIDING_STYLED_ITEM('overriding color',(#555936),#149711, + #555921); +#555936 = PRESENTATION_STYLE_ASSIGNMENT((#555937)); +#555937 = SURFACE_STYLE_USAGE(.BOTH.,#555938); +#555938 = SURFACE_SIDE_STYLE('',(#555939)); +#555939 = SURFACE_STYLE_FILL_AREA(#555940); +#555940 = FILL_AREA_STYLE('',(#555941)); +#555941 = FILL_AREA_STYLE_COLOUR('',#510798); +#555942 = OVER_RIDING_STYLED_ITEM('overriding color',(#555943),#149835, + #555921); +#555943 = PRESENTATION_STYLE_ASSIGNMENT((#555944)); +#555944 = SURFACE_STYLE_USAGE(.BOTH.,#555945); +#555945 = SURFACE_SIDE_STYLE('',(#555946)); +#555946 = SURFACE_STYLE_FILL_AREA(#555947); +#555947 = FILL_AREA_STYLE('',(#555948)); +#555948 = FILL_AREA_STYLE_COLOUR('',#510798); +#555949 = OVER_RIDING_STYLED_ITEM('overriding color',(#555950),#149857, + #555921); +#555950 = PRESENTATION_STYLE_ASSIGNMENT((#555951)); +#555951 = SURFACE_STYLE_USAGE(.BOTH.,#555952); +#555952 = SURFACE_SIDE_STYLE('',(#555953)); +#555953 = SURFACE_STYLE_FILL_AREA(#555954); +#555954 = FILL_AREA_STYLE('',(#555955)); +#555955 = FILL_AREA_STYLE_COLOUR('',#510798); +#555956 = OVER_RIDING_STYLED_ITEM('overriding color',(#555957),#149874, + #555921); +#555957 = PRESENTATION_STYLE_ASSIGNMENT((#555958)); +#555958 = SURFACE_STYLE_USAGE(.BOTH.,#555959); +#555959 = SURFACE_SIDE_STYLE('',(#555960)); +#555960 = SURFACE_STYLE_FILL_AREA(#555961); +#555961 = FILL_AREA_STYLE('',(#555962)); +#555962 = FILL_AREA_STYLE_COLOUR('',#510798); +#555963 = OVER_RIDING_STYLED_ITEM('overriding color',(#555964),#149891, + #555921); +#555964 = PRESENTATION_STYLE_ASSIGNMENT((#555965)); +#555965 = SURFACE_STYLE_USAGE(.BOTH.,#555966); +#555966 = SURFACE_SIDE_STYLE('',(#555967)); +#555967 = SURFACE_STYLE_FILL_AREA(#555968); +#555968 = FILL_AREA_STYLE('',(#555969)); +#555969 = FILL_AREA_STYLE_COLOUR('',#510798); +#555970 = OVER_RIDING_STYLED_ITEM('overriding color',(#555971),#149908, + #555921); +#555971 = PRESENTATION_STYLE_ASSIGNMENT((#555972)); +#555972 = SURFACE_STYLE_USAGE(.BOTH.,#555973); +#555973 = SURFACE_SIDE_STYLE('',(#555974)); +#555974 = SURFACE_STYLE_FILL_AREA(#555975); +#555975 = FILL_AREA_STYLE('',(#555976)); +#555976 = FILL_AREA_STYLE_COLOUR('',#510798); +#555977 = OVER_RIDING_STYLED_ITEM('overriding color',(#555978),#149925, + #555921); +#555978 = PRESENTATION_STYLE_ASSIGNMENT((#555979)); +#555979 = SURFACE_STYLE_USAGE(.BOTH.,#555980); +#555980 = SURFACE_SIDE_STYLE('',(#555981)); +#555981 = SURFACE_STYLE_FILL_AREA(#555982); +#555982 = FILL_AREA_STYLE('',(#555983)); +#555983 = FILL_AREA_STYLE_COLOUR('',#510798); +#555984 = OVER_RIDING_STYLED_ITEM('overriding color',(#555985),#149942, + #555921); +#555985 = PRESENTATION_STYLE_ASSIGNMENT((#555986)); +#555986 = SURFACE_STYLE_USAGE(.BOTH.,#555987); +#555987 = SURFACE_SIDE_STYLE('',(#555988)); +#555988 = SURFACE_STYLE_FILL_AREA(#555989); +#555989 = FILL_AREA_STYLE('',(#555990)); +#555990 = FILL_AREA_STYLE_COLOUR('',#510798); +#555991 = OVER_RIDING_STYLED_ITEM('overriding color',(#555992),#149959, + #555921); +#555992 = PRESENTATION_STYLE_ASSIGNMENT((#555993)); +#555993 = SURFACE_STYLE_USAGE(.BOTH.,#555994); +#555994 = SURFACE_SIDE_STYLE('',(#555995)); +#555995 = SURFACE_STYLE_FILL_AREA(#555996); +#555996 = FILL_AREA_STYLE('',(#555997)); +#555997 = FILL_AREA_STYLE_COLOUR('',#510798); +#555998 = OVER_RIDING_STYLED_ITEM('overriding color',(#555999),#149971, + #555921); +#555999 = PRESENTATION_STYLE_ASSIGNMENT((#556000)); +#556000 = SURFACE_STYLE_USAGE(.BOTH.,#556001); +#556001 = SURFACE_SIDE_STYLE('',(#556002)); +#556002 = SURFACE_STYLE_FILL_AREA(#556003); +#556003 = FILL_AREA_STYLE('',(#556004)); +#556004 = FILL_AREA_STYLE_COLOUR('',#510798); +#556005 = OVER_RIDING_STYLED_ITEM('overriding color',(#556006),#149993, + #555921); +#556006 = PRESENTATION_STYLE_ASSIGNMENT((#556007)); +#556007 = SURFACE_STYLE_USAGE(.BOTH.,#556008); +#556008 = SURFACE_SIDE_STYLE('',(#556009)); +#556009 = SURFACE_STYLE_FILL_AREA(#556010); +#556010 = FILL_AREA_STYLE('',(#556011)); +#556011 = FILL_AREA_STYLE_COLOUR('',#510798); +#556012 = OVER_RIDING_STYLED_ITEM('overriding color',(#556013),#150010, + #555921); +#556013 = PRESENTATION_STYLE_ASSIGNMENT((#556014)); +#556014 = SURFACE_STYLE_USAGE(.BOTH.,#556015); +#556015 = SURFACE_SIDE_STYLE('',(#556016)); +#556016 = SURFACE_STYLE_FILL_AREA(#556017); +#556017 = FILL_AREA_STYLE('',(#556018)); +#556018 = FILL_AREA_STYLE_COLOUR('',#510798); +#556019 = OVER_RIDING_STYLED_ITEM('overriding color',(#556020),#150031, + #555921); +#556020 = PRESENTATION_STYLE_ASSIGNMENT((#556021)); +#556021 = SURFACE_STYLE_USAGE(.BOTH.,#556022); +#556022 = SURFACE_SIDE_STYLE('',(#556023)); +#556023 = SURFACE_STYLE_FILL_AREA(#556024); +#556024 = FILL_AREA_STYLE('',(#556025)); +#556025 = FILL_AREA_STYLE_COLOUR('',#510798); +#556026 = OVER_RIDING_STYLED_ITEM('overriding color',(#556027),#150048, + #555921); +#556027 = PRESENTATION_STYLE_ASSIGNMENT((#556028)); +#556028 = SURFACE_STYLE_USAGE(.BOTH.,#556029); +#556029 = SURFACE_SIDE_STYLE('',(#556030)); +#556030 = SURFACE_STYLE_FILL_AREA(#556031); +#556031 = FILL_AREA_STYLE('',(#556032)); +#556032 = FILL_AREA_STYLE_COLOUR('',#510798); +#556033 = OVER_RIDING_STYLED_ITEM('overriding color',(#556034),#150069, + #555921); +#556034 = PRESENTATION_STYLE_ASSIGNMENT((#556035)); +#556035 = SURFACE_STYLE_USAGE(.BOTH.,#556036); +#556036 = SURFACE_SIDE_STYLE('',(#556037)); +#556037 = SURFACE_STYLE_FILL_AREA(#556038); +#556038 = FILL_AREA_STYLE('',(#556039)); +#556039 = FILL_AREA_STYLE_COLOUR('',#510798); +#556040 = STYLED_ITEM('color',(#556041),#150081); +#556041 = PRESENTATION_STYLE_ASSIGNMENT((#556042)); +#556042 = SURFACE_STYLE_USAGE(.BOTH.,#556043); +#556043 = SURFACE_SIDE_STYLE('',(#556044)); +#556044 = SURFACE_STYLE_FILL_AREA(#556045); +#556045 = FILL_AREA_STYLE('',(#556046)); +#556046 = FILL_AREA_STYLE_COLOUR('',#521053); +#556047 = OVER_RIDING_STYLED_ITEM('overriding color',(#556048),#150083, + #556040); +#556048 = PRESENTATION_STYLE_ASSIGNMENT((#556049)); +#556049 = SURFACE_STYLE_USAGE(.BOTH.,#556050); +#556050 = SURFACE_SIDE_STYLE('',(#556051)); +#556051 = SURFACE_STYLE_FILL_AREA(#556052); +#556052 = FILL_AREA_STYLE('',(#556053)); +#556053 = FILL_AREA_STYLE_COLOUR('',#510798); +#556054 = OVER_RIDING_STYLED_ITEM('overriding color',(#556055),#150123, + #556040); +#556055 = PRESENTATION_STYLE_ASSIGNMENT((#556056)); +#556056 = SURFACE_STYLE_USAGE(.BOTH.,#556057); +#556057 = SURFACE_SIDE_STYLE('',(#556058)); +#556058 = SURFACE_STYLE_FILL_AREA(#556059); +#556059 = FILL_AREA_STYLE('',(#556060)); +#556060 = FILL_AREA_STYLE_COLOUR('',#510798); +#556061 = OVER_RIDING_STYLED_ITEM('overriding color',(#556062),#150154, + #556040); +#556062 = PRESENTATION_STYLE_ASSIGNMENT((#556063)); +#556063 = SURFACE_STYLE_USAGE(.BOTH.,#556064); +#556064 = SURFACE_SIDE_STYLE('',(#556065)); +#556065 = SURFACE_STYLE_FILL_AREA(#556066); +#556066 = FILL_AREA_STYLE('',(#556067)); +#556067 = FILL_AREA_STYLE_COLOUR('',#510798); +#556068 = OVER_RIDING_STYLED_ITEM('overriding color',(#556069),#150185, + #556040); +#556069 = PRESENTATION_STYLE_ASSIGNMENT((#556070)); +#556070 = SURFACE_STYLE_USAGE(.BOTH.,#556071); +#556071 = SURFACE_SIDE_STYLE('',(#556072)); +#556072 = SURFACE_STYLE_FILL_AREA(#556073); +#556073 = FILL_AREA_STYLE('',(#556074)); +#556074 = FILL_AREA_STYLE_COLOUR('',#510798); +#556075 = OVER_RIDING_STYLED_ITEM('overriding color',(#556076),#150216, + #556040); +#556076 = PRESENTATION_STYLE_ASSIGNMENT((#556077)); +#556077 = SURFACE_STYLE_USAGE(.BOTH.,#556078); +#556078 = SURFACE_SIDE_STYLE('',(#556079)); +#556079 = SURFACE_STYLE_FILL_AREA(#556080); +#556080 = FILL_AREA_STYLE('',(#556081)); +#556081 = FILL_AREA_STYLE_COLOUR('',#510798); +#556082 = OVER_RIDING_STYLED_ITEM('overriding color',(#556083),#150247, + #556040); +#556083 = PRESENTATION_STYLE_ASSIGNMENT((#556084)); +#556084 = SURFACE_STYLE_USAGE(.BOTH.,#556085); +#556085 = SURFACE_SIDE_STYLE('',(#556086)); +#556086 = SURFACE_STYLE_FILL_AREA(#556087); +#556087 = FILL_AREA_STYLE('',(#556088)); +#556088 = FILL_AREA_STYLE_COLOUR('',#510798); +#556089 = OVER_RIDING_STYLED_ITEM('overriding color',(#556090),#150278, + #556040); +#556090 = PRESENTATION_STYLE_ASSIGNMENT((#556091)); +#556091 = SURFACE_STYLE_USAGE(.BOTH.,#556092); +#556092 = SURFACE_SIDE_STYLE('',(#556093)); +#556093 = SURFACE_STYLE_FILL_AREA(#556094); +#556094 = FILL_AREA_STYLE('',(#556095)); +#556095 = FILL_AREA_STYLE_COLOUR('',#510798); +#556096 = OVER_RIDING_STYLED_ITEM('overriding color',(#556097),#150309, + #556040); +#556097 = PRESENTATION_STYLE_ASSIGNMENT((#556098)); +#556098 = SURFACE_STYLE_USAGE(.BOTH.,#556099); +#556099 = SURFACE_SIDE_STYLE('',(#556100)); +#556100 = SURFACE_STYLE_FILL_AREA(#556101); +#556101 = FILL_AREA_STYLE('',(#556102)); +#556102 = FILL_AREA_STYLE_COLOUR('',#510798); +#556103 = OVER_RIDING_STYLED_ITEM('overriding color',(#556104),#150340, + #556040); +#556104 = PRESENTATION_STYLE_ASSIGNMENT((#556105)); +#556105 = SURFACE_STYLE_USAGE(.BOTH.,#556106); +#556106 = SURFACE_SIDE_STYLE('',(#556107)); +#556107 = SURFACE_STYLE_FILL_AREA(#556108); +#556108 = FILL_AREA_STYLE('',(#556109)); +#556109 = FILL_AREA_STYLE_COLOUR('',#510798); +#556110 = OVER_RIDING_STYLED_ITEM('overriding color',(#556111),#150371, + #556040); +#556111 = PRESENTATION_STYLE_ASSIGNMENT((#556112)); +#556112 = SURFACE_STYLE_USAGE(.BOTH.,#556113); +#556113 = SURFACE_SIDE_STYLE('',(#556114)); +#556114 = SURFACE_STYLE_FILL_AREA(#556115); +#556115 = FILL_AREA_STYLE('',(#556116)); +#556116 = FILL_AREA_STYLE_COLOUR('',#510798); +#556117 = OVER_RIDING_STYLED_ITEM('overriding color',(#556118),#150402, + #556040); +#556118 = PRESENTATION_STYLE_ASSIGNMENT((#556119)); +#556119 = SURFACE_STYLE_USAGE(.BOTH.,#556120); +#556120 = SURFACE_SIDE_STYLE('',(#556121)); +#556121 = SURFACE_STYLE_FILL_AREA(#556122); +#556122 = FILL_AREA_STYLE('',(#556123)); +#556123 = FILL_AREA_STYLE_COLOUR('',#510798); +#556124 = OVER_RIDING_STYLED_ITEM('overriding color',(#556125),#150433, + #556040); +#556125 = PRESENTATION_STYLE_ASSIGNMENT((#556126)); +#556126 = SURFACE_STYLE_USAGE(.BOTH.,#556127); +#556127 = SURFACE_SIDE_STYLE('',(#556128)); +#556128 = SURFACE_STYLE_FILL_AREA(#556129); +#556129 = FILL_AREA_STYLE('',(#556130)); +#556130 = FILL_AREA_STYLE_COLOUR('',#510798); +#556131 = OVER_RIDING_STYLED_ITEM('overriding color',(#556132),#150455, + #556040); +#556132 = PRESENTATION_STYLE_ASSIGNMENT((#556133)); +#556133 = SURFACE_STYLE_USAGE(.BOTH.,#556134); +#556134 = SURFACE_SIDE_STYLE('',(#556135)); +#556135 = SURFACE_STYLE_FILL_AREA(#556136); +#556136 = FILL_AREA_STYLE('',(#556137)); +#556137 = FILL_AREA_STYLE_COLOUR('',#510798); +#556138 = OVER_RIDING_STYLED_ITEM('overriding color',(#556139),#150475, + #556040); +#556139 = PRESENTATION_STYLE_ASSIGNMENT((#556140)); +#556140 = SURFACE_STYLE_USAGE(.BOTH.,#556141); +#556141 = SURFACE_SIDE_STYLE('',(#556142)); +#556142 = SURFACE_STYLE_FILL_AREA(#556143); +#556143 = FILL_AREA_STYLE('',(#556144)); +#556144 = FILL_AREA_STYLE_COLOUR('',#510798); +#556145 = STYLED_ITEM('color',(#556146),#150495); +#556146 = PRESENTATION_STYLE_ASSIGNMENT((#556147)); +#556147 = SURFACE_STYLE_USAGE(.BOTH.,#556148); +#556148 = SURFACE_SIDE_STYLE('',(#556149)); +#556149 = SURFACE_STYLE_FILL_AREA(#556150); +#556150 = FILL_AREA_STYLE('',(#556151)); +#556151 = FILL_AREA_STYLE_COLOUR('',#521053); +#556152 = OVER_RIDING_STYLED_ITEM('overriding color',(#556153),#150497, + #556145); +#556153 = PRESENTATION_STYLE_ASSIGNMENT((#556154)); +#556154 = SURFACE_STYLE_USAGE(.BOTH.,#556155); +#556155 = SURFACE_SIDE_STYLE('',(#556156)); +#556156 = SURFACE_STYLE_FILL_AREA(#556157); +#556157 = FILL_AREA_STYLE('',(#556158)); +#556158 = FILL_AREA_STYLE_COLOUR('',#510798); +#556159 = OVER_RIDING_STYLED_ITEM('overriding color',(#556160),#150697, + #556145); +#556160 = PRESENTATION_STYLE_ASSIGNMENT((#556161)); +#556161 = SURFACE_STYLE_USAGE(.BOTH.,#556162); +#556162 = SURFACE_SIDE_STYLE('',(#556163)); +#556163 = SURFACE_STYLE_FILL_AREA(#556164); +#556164 = FILL_AREA_STYLE('',(#556165)); +#556165 = FILL_AREA_STYLE_COLOUR('',#510798); +#556166 = OVER_RIDING_STYLED_ITEM('overriding color',(#556167),#150897, + #556145); +#556167 = PRESENTATION_STYLE_ASSIGNMENT((#556168)); +#556168 = SURFACE_STYLE_USAGE(.BOTH.,#556169); +#556169 = SURFACE_SIDE_STYLE('',(#556170)); +#556170 = SURFACE_STYLE_FILL_AREA(#556171); +#556171 = FILL_AREA_STYLE('',(#556172)); +#556172 = FILL_AREA_STYLE_COLOUR('',#510798); +#556173 = OVER_RIDING_STYLED_ITEM('overriding color',(#556174),#150923, + #556145); +#556174 = PRESENTATION_STYLE_ASSIGNMENT((#556175)); +#556175 = SURFACE_STYLE_USAGE(.BOTH.,#556176); +#556176 = SURFACE_SIDE_STYLE('',(#556177)); +#556177 = SURFACE_STYLE_FILL_AREA(#556178); +#556178 = FILL_AREA_STYLE('',(#556179)); +#556179 = FILL_AREA_STYLE_COLOUR('',#510798); +#556180 = OVER_RIDING_STYLED_ITEM('overriding color',(#556181),#150940, + #556145); +#556181 = PRESENTATION_STYLE_ASSIGNMENT((#556182)); +#556182 = SURFACE_STYLE_USAGE(.BOTH.,#556183); +#556183 = SURFACE_SIDE_STYLE('',(#556184)); +#556184 = SURFACE_STYLE_FILL_AREA(#556185); +#556185 = FILL_AREA_STYLE('',(#556186)); +#556186 = FILL_AREA_STYLE_COLOUR('',#510798); +#556187 = OVER_RIDING_STYLED_ITEM('overriding color',(#556188),#150961, + #556145); +#556188 = PRESENTATION_STYLE_ASSIGNMENT((#556189)); +#556189 = SURFACE_STYLE_USAGE(.BOTH.,#556190); +#556190 = SURFACE_SIDE_STYLE('',(#556191)); +#556191 = SURFACE_STYLE_FILL_AREA(#556192); +#556192 = FILL_AREA_STYLE('',(#556193)); +#556193 = FILL_AREA_STYLE_COLOUR('',#510798); +#556194 = OVER_RIDING_STYLED_ITEM('overriding color',(#556195),#150982, + #556145); +#556195 = PRESENTATION_STYLE_ASSIGNMENT((#556196)); +#556196 = SURFACE_STYLE_USAGE(.BOTH.,#556197); +#556197 = SURFACE_SIDE_STYLE('',(#556198)); +#556198 = SURFACE_STYLE_FILL_AREA(#556199); +#556199 = FILL_AREA_STYLE('',(#556200)); +#556200 = FILL_AREA_STYLE_COLOUR('',#510798); +#556201 = OVER_RIDING_STYLED_ITEM('overriding color',(#556202),#150999, + #556145); +#556202 = PRESENTATION_STYLE_ASSIGNMENT((#556203)); +#556203 = SURFACE_STYLE_USAGE(.BOTH.,#556204); +#556204 = SURFACE_SIDE_STYLE('',(#556205)); +#556205 = SURFACE_STYLE_FILL_AREA(#556206); +#556206 = FILL_AREA_STYLE('',(#556207)); +#556207 = FILL_AREA_STYLE_COLOUR('',#510798); +#556208 = OVER_RIDING_STYLED_ITEM('overriding color',(#556209),#151020, + #556145); +#556209 = PRESENTATION_STYLE_ASSIGNMENT((#556210)); +#556210 = SURFACE_STYLE_USAGE(.BOTH.,#556211); +#556211 = SURFACE_SIDE_STYLE('',(#556212)); +#556212 = SURFACE_STYLE_FILL_AREA(#556213); +#556213 = FILL_AREA_STYLE('',(#556214)); +#556214 = FILL_AREA_STYLE_COLOUR('',#510798); +#556215 = OVER_RIDING_STYLED_ITEM('overriding color',(#556216),#151041, + #556145); +#556216 = PRESENTATION_STYLE_ASSIGNMENT((#556217)); +#556217 = SURFACE_STYLE_USAGE(.BOTH.,#556218); +#556218 = SURFACE_SIDE_STYLE('',(#556219)); +#556219 = SURFACE_STYLE_FILL_AREA(#556220); +#556220 = FILL_AREA_STYLE('',(#556221)); +#556221 = FILL_AREA_STYLE_COLOUR('',#510798); +#556222 = OVER_RIDING_STYLED_ITEM('overriding color',(#556223),#151062, + #556145); +#556223 = PRESENTATION_STYLE_ASSIGNMENT((#556224)); +#556224 = SURFACE_STYLE_USAGE(.BOTH.,#556225); +#556225 = SURFACE_SIDE_STYLE('',(#556226)); +#556226 = SURFACE_STYLE_FILL_AREA(#556227); +#556227 = FILL_AREA_STYLE('',(#556228)); +#556228 = FILL_AREA_STYLE_COLOUR('',#510798); +#556229 = OVER_RIDING_STYLED_ITEM('overriding color',(#556230),#151083, + #556145); +#556230 = PRESENTATION_STYLE_ASSIGNMENT((#556231)); +#556231 = SURFACE_STYLE_USAGE(.BOTH.,#556232); +#556232 = SURFACE_SIDE_STYLE('',(#556233)); +#556233 = SURFACE_STYLE_FILL_AREA(#556234); +#556234 = FILL_AREA_STYLE('',(#556235)); +#556235 = FILL_AREA_STYLE_COLOUR('',#510798); +#556236 = OVER_RIDING_STYLED_ITEM('overriding color',(#556237),#151100, + #556145); +#556237 = PRESENTATION_STYLE_ASSIGNMENT((#556238)); +#556238 = SURFACE_STYLE_USAGE(.BOTH.,#556239); +#556239 = SURFACE_SIDE_STYLE('',(#556240)); +#556240 = SURFACE_STYLE_FILL_AREA(#556241); +#556241 = FILL_AREA_STYLE('',(#556242)); +#556242 = FILL_AREA_STYLE_COLOUR('',#510798); +#556243 = OVER_RIDING_STYLED_ITEM('overriding color',(#556244),#151117, + #556145); +#556244 = PRESENTATION_STYLE_ASSIGNMENT((#556245)); +#556245 = SURFACE_STYLE_USAGE(.BOTH.,#556246); +#556246 = SURFACE_SIDE_STYLE('',(#556247)); +#556247 = SURFACE_STYLE_FILL_AREA(#556248); +#556248 = FILL_AREA_STYLE('',(#556249)); +#556249 = FILL_AREA_STYLE_COLOUR('',#510798); +#556250 = OVER_RIDING_STYLED_ITEM('overriding color',(#556251),#151134, + #556145); +#556251 = PRESENTATION_STYLE_ASSIGNMENT((#556252)); +#556252 = SURFACE_STYLE_USAGE(.BOTH.,#556253); +#556253 = SURFACE_SIDE_STYLE('',(#556254)); +#556254 = SURFACE_STYLE_FILL_AREA(#556255); +#556255 = FILL_AREA_STYLE('',(#556256)); +#556256 = FILL_AREA_STYLE_COLOUR('',#510798); +#556257 = OVER_RIDING_STYLED_ITEM('overriding color',(#556258),#151151, + #556145); +#556258 = PRESENTATION_STYLE_ASSIGNMENT((#556259)); +#556259 = SURFACE_STYLE_USAGE(.BOTH.,#556260); +#556260 = SURFACE_SIDE_STYLE('',(#556261)); +#556261 = SURFACE_STYLE_FILL_AREA(#556262); +#556262 = FILL_AREA_STYLE('',(#556263)); +#556263 = FILL_AREA_STYLE_COLOUR('',#510798); +#556264 = OVER_RIDING_STYLED_ITEM('overriding color',(#556265),#151167, + #556145); +#556265 = PRESENTATION_STYLE_ASSIGNMENT((#556266)); +#556266 = SURFACE_STYLE_USAGE(.BOTH.,#556267); +#556267 = SURFACE_SIDE_STYLE('',(#556268)); +#556268 = SURFACE_STYLE_FILL_AREA(#556269); +#556269 = FILL_AREA_STYLE('',(#556270)); +#556270 = FILL_AREA_STYLE_COLOUR('',#510798); +#556271 = OVER_RIDING_STYLED_ITEM('overriding color',(#556272),#151193, + #556145); +#556272 = PRESENTATION_STYLE_ASSIGNMENT((#556273)); +#556273 = SURFACE_STYLE_USAGE(.BOTH.,#556274); +#556274 = SURFACE_SIDE_STYLE('',(#556275)); +#556275 = SURFACE_STYLE_FILL_AREA(#556276); +#556276 = FILL_AREA_STYLE('',(#556277)); +#556277 = FILL_AREA_STYLE_COLOUR('',#510798); +#556278 = OVER_RIDING_STYLED_ITEM('overriding color',(#556279),#151214, + #556145); +#556279 = PRESENTATION_STYLE_ASSIGNMENT((#556280)); +#556280 = SURFACE_STYLE_USAGE(.BOTH.,#556281); +#556281 = SURFACE_SIDE_STYLE('',(#556282)); +#556282 = SURFACE_STYLE_FILL_AREA(#556283); +#556283 = FILL_AREA_STYLE('',(#556284)); +#556284 = FILL_AREA_STYLE_COLOUR('',#510798); +#556285 = OVER_RIDING_STYLED_ITEM('overriding color',(#556286),#151235, + #556145); +#556286 = PRESENTATION_STYLE_ASSIGNMENT((#556287)); +#556287 = SURFACE_STYLE_USAGE(.BOTH.,#556288); +#556288 = SURFACE_SIDE_STYLE('',(#556289)); +#556289 = SURFACE_STYLE_FILL_AREA(#556290); +#556290 = FILL_AREA_STYLE('',(#556291)); +#556291 = FILL_AREA_STYLE_COLOUR('',#510798); +#556292 = OVER_RIDING_STYLED_ITEM('overriding color',(#556293),#151256, + #556145); +#556293 = PRESENTATION_STYLE_ASSIGNMENT((#556294)); +#556294 = SURFACE_STYLE_USAGE(.BOTH.,#556295); +#556295 = SURFACE_SIDE_STYLE('',(#556296)); +#556296 = SURFACE_STYLE_FILL_AREA(#556297); +#556297 = FILL_AREA_STYLE('',(#556298)); +#556298 = FILL_AREA_STYLE_COLOUR('',#510798); +#556299 = OVER_RIDING_STYLED_ITEM('overriding color',(#556300),#151277, + #556145); +#556300 = PRESENTATION_STYLE_ASSIGNMENT((#556301)); +#556301 = SURFACE_STYLE_USAGE(.BOTH.,#556302); +#556302 = SURFACE_SIDE_STYLE('',(#556303)); +#556303 = SURFACE_STYLE_FILL_AREA(#556304); +#556304 = FILL_AREA_STYLE('',(#556305)); +#556305 = FILL_AREA_STYLE_COLOUR('',#510798); +#556306 = OVER_RIDING_STYLED_ITEM('overriding color',(#556307),#151298, + #556145); +#556307 = PRESENTATION_STYLE_ASSIGNMENT((#556308)); +#556308 = SURFACE_STYLE_USAGE(.BOTH.,#556309); +#556309 = SURFACE_SIDE_STYLE('',(#556310)); +#556310 = SURFACE_STYLE_FILL_AREA(#556311); +#556311 = FILL_AREA_STYLE('',(#556312)); +#556312 = FILL_AREA_STYLE_COLOUR('',#510798); +#556313 = OVER_RIDING_STYLED_ITEM('overriding color',(#556314),#151315, + #556145); +#556314 = PRESENTATION_STYLE_ASSIGNMENT((#556315)); +#556315 = SURFACE_STYLE_USAGE(.BOTH.,#556316); +#556316 = SURFACE_SIDE_STYLE('',(#556317)); +#556317 = SURFACE_STYLE_FILL_AREA(#556318); +#556318 = FILL_AREA_STYLE('',(#556319)); +#556319 = FILL_AREA_STYLE_COLOUR('',#510798); +#556320 = STYLED_ITEM('color',(#556321),#151327); +#556321 = PRESENTATION_STYLE_ASSIGNMENT((#556322)); +#556322 = SURFACE_STYLE_USAGE(.BOTH.,#556323); +#556323 = SURFACE_SIDE_STYLE('',(#556324)); +#556324 = SURFACE_STYLE_FILL_AREA(#556325); +#556325 = FILL_AREA_STYLE('',(#556326)); +#556326 = FILL_AREA_STYLE_COLOUR('',#521053); +#556327 = OVER_RIDING_STYLED_ITEM('overriding color',(#556328),#151329, + #556320); +#556328 = PRESENTATION_STYLE_ASSIGNMENT((#556329)); +#556329 = SURFACE_STYLE_USAGE(.BOTH.,#556330); +#556330 = SURFACE_SIDE_STYLE('',(#556331)); +#556331 = SURFACE_STYLE_FILL_AREA(#556332); +#556332 = FILL_AREA_STYLE('',(#556333)); +#556333 = FILL_AREA_STYLE_COLOUR('',#510798); +#556334 = OVER_RIDING_STYLED_ITEM('overriding color',(#556335),#151375, + #556320); +#556335 = PRESENTATION_STYLE_ASSIGNMENT((#556336)); +#556336 = SURFACE_STYLE_USAGE(.BOTH.,#556337); +#556337 = SURFACE_SIDE_STYLE('',(#556338)); +#556338 = SURFACE_STYLE_FILL_AREA(#556339); +#556339 = FILL_AREA_STYLE('',(#556340)); +#556340 = FILL_AREA_STYLE_COLOUR('',#510798); +#556341 = OVER_RIDING_STYLED_ITEM('overriding color',(#556342),#151406, + #556320); +#556342 = PRESENTATION_STYLE_ASSIGNMENT((#556343)); +#556343 = SURFACE_STYLE_USAGE(.BOTH.,#556344); +#556344 = SURFACE_SIDE_STYLE('',(#556345)); +#556345 = SURFACE_STYLE_FILL_AREA(#556346); +#556346 = FILL_AREA_STYLE('',(#556347)); +#556347 = FILL_AREA_STYLE_COLOUR('',#510798); +#556348 = OVER_RIDING_STYLED_ITEM('overriding color',(#556349),#151443, + #556320); +#556349 = PRESENTATION_STYLE_ASSIGNMENT((#556350)); +#556350 = SURFACE_STYLE_USAGE(.BOTH.,#556351); +#556351 = SURFACE_SIDE_STYLE('',(#556352)); +#556352 = SURFACE_STYLE_FILL_AREA(#556353); +#556353 = FILL_AREA_STYLE('',(#556354)); +#556354 = FILL_AREA_STYLE_COLOUR('',#510798); +#556355 = OVER_RIDING_STYLED_ITEM('overriding color',(#556356),#151480, + #556320); +#556356 = PRESENTATION_STYLE_ASSIGNMENT((#556357)); +#556357 = SURFACE_STYLE_USAGE(.BOTH.,#556358); +#556358 = SURFACE_SIDE_STYLE('',(#556359)); +#556359 = SURFACE_STYLE_FILL_AREA(#556360); +#556360 = FILL_AREA_STYLE('',(#556361)); +#556361 = FILL_AREA_STYLE_COLOUR('',#510798); +#556362 = OVER_RIDING_STYLED_ITEM('overriding color',(#556363),#151517, + #556320); +#556363 = PRESENTATION_STYLE_ASSIGNMENT((#556364)); +#556364 = SURFACE_STYLE_USAGE(.BOTH.,#556365); +#556365 = SURFACE_SIDE_STYLE('',(#556366)); +#556366 = SURFACE_STYLE_FILL_AREA(#556367); +#556367 = FILL_AREA_STYLE('',(#556368)); +#556368 = FILL_AREA_STYLE_COLOUR('',#510798); +#556369 = OVER_RIDING_STYLED_ITEM('overriding color',(#556370),#151554, + #556320); +#556370 = PRESENTATION_STYLE_ASSIGNMENT((#556371)); +#556371 = SURFACE_STYLE_USAGE(.BOTH.,#556372); +#556372 = SURFACE_SIDE_STYLE('',(#556373)); +#556373 = SURFACE_STYLE_FILL_AREA(#556374); +#556374 = FILL_AREA_STYLE('',(#556375)); +#556375 = FILL_AREA_STYLE_COLOUR('',#510798); +#556376 = OVER_RIDING_STYLED_ITEM('overriding color',(#556377),#151591, + #556320); +#556377 = PRESENTATION_STYLE_ASSIGNMENT((#556378)); +#556378 = SURFACE_STYLE_USAGE(.BOTH.,#556379); +#556379 = SURFACE_SIDE_STYLE('',(#556380)); +#556380 = SURFACE_STYLE_FILL_AREA(#556381); +#556381 = FILL_AREA_STYLE('',(#556382)); +#556382 = FILL_AREA_STYLE_COLOUR('',#510798); +#556383 = OVER_RIDING_STYLED_ITEM('overriding color',(#556384),#151628, + #556320); +#556384 = PRESENTATION_STYLE_ASSIGNMENT((#556385)); +#556385 = SURFACE_STYLE_USAGE(.BOTH.,#556386); +#556386 = SURFACE_SIDE_STYLE('',(#556387)); +#556387 = SURFACE_STYLE_FILL_AREA(#556388); +#556388 = FILL_AREA_STYLE('',(#556389)); +#556389 = FILL_AREA_STYLE_COLOUR('',#510798); +#556390 = OVER_RIDING_STYLED_ITEM('overriding color',(#556391),#151665, + #556320); +#556391 = PRESENTATION_STYLE_ASSIGNMENT((#556392)); +#556392 = SURFACE_STYLE_USAGE(.BOTH.,#556393); +#556393 = SURFACE_SIDE_STYLE('',(#556394)); +#556394 = SURFACE_STYLE_FILL_AREA(#556395); +#556395 = FILL_AREA_STYLE('',(#556396)); +#556396 = FILL_AREA_STYLE_COLOUR('',#510798); +#556397 = OVER_RIDING_STYLED_ITEM('overriding color',(#556398),#151702, + #556320); +#556398 = PRESENTATION_STYLE_ASSIGNMENT((#556399)); +#556399 = SURFACE_STYLE_USAGE(.BOTH.,#556400); +#556400 = SURFACE_SIDE_STYLE('',(#556401)); +#556401 = SURFACE_STYLE_FILL_AREA(#556402); +#556402 = FILL_AREA_STYLE('',(#556403)); +#556403 = FILL_AREA_STYLE_COLOUR('',#510798); +#556404 = OVER_RIDING_STYLED_ITEM('overriding color',(#556405),#151739, + #556320); +#556405 = PRESENTATION_STYLE_ASSIGNMENT((#556406)); +#556406 = SURFACE_STYLE_USAGE(.BOTH.,#556407); +#556407 = SURFACE_SIDE_STYLE('',(#556408)); +#556408 = SURFACE_STYLE_FILL_AREA(#556409); +#556409 = FILL_AREA_STYLE('',(#556410)); +#556410 = FILL_AREA_STYLE_COLOUR('',#510798); +#556411 = OVER_RIDING_STYLED_ITEM('overriding color',(#556412),#151776, + #556320); +#556412 = PRESENTATION_STYLE_ASSIGNMENT((#556413)); +#556413 = SURFACE_STYLE_USAGE(.BOTH.,#556414); +#556414 = SURFACE_SIDE_STYLE('',(#556415)); +#556415 = SURFACE_STYLE_FILL_AREA(#556416); +#556416 = FILL_AREA_STYLE('',(#556417)); +#556417 = FILL_AREA_STYLE_COLOUR('',#510798); +#556418 = OVER_RIDING_STYLED_ITEM('overriding color',(#556419),#151807, + #556320); +#556419 = PRESENTATION_STYLE_ASSIGNMENT((#556420)); +#556420 = SURFACE_STYLE_USAGE(.BOTH.,#556421); +#556421 = SURFACE_SIDE_STYLE('',(#556422)); +#556422 = SURFACE_STYLE_FILL_AREA(#556423); +#556423 = FILL_AREA_STYLE('',(#556424)); +#556424 = FILL_AREA_STYLE_COLOUR('',#510798); +#556425 = OVER_RIDING_STYLED_ITEM('overriding color',(#556426),#151844, + #556320); +#556426 = PRESENTATION_STYLE_ASSIGNMENT((#556427)); +#556427 = SURFACE_STYLE_USAGE(.BOTH.,#556428); +#556428 = SURFACE_SIDE_STYLE('',(#556429)); +#556429 = SURFACE_STYLE_FILL_AREA(#556430); +#556430 = FILL_AREA_STYLE('',(#556431)); +#556431 = FILL_AREA_STYLE_COLOUR('',#510798); +#556432 = OVER_RIDING_STYLED_ITEM('overriding color',(#556433),#151881, + #556320); +#556433 = PRESENTATION_STYLE_ASSIGNMENT((#556434)); +#556434 = SURFACE_STYLE_USAGE(.BOTH.,#556435); +#556435 = SURFACE_SIDE_STYLE('',(#556436)); +#556436 = SURFACE_STYLE_FILL_AREA(#556437); +#556437 = FILL_AREA_STYLE('',(#556438)); +#556438 = FILL_AREA_STYLE_COLOUR('',#510798); +#556439 = OVER_RIDING_STYLED_ITEM('overriding color',(#556440),#151918, + #556320); +#556440 = PRESENTATION_STYLE_ASSIGNMENT((#556441)); +#556441 = SURFACE_STYLE_USAGE(.BOTH.,#556442); +#556442 = SURFACE_SIDE_STYLE('',(#556443)); +#556443 = SURFACE_STYLE_FILL_AREA(#556444); +#556444 = FILL_AREA_STYLE('',(#556445)); +#556445 = FILL_AREA_STYLE_COLOUR('',#510798); +#556446 = OVER_RIDING_STYLED_ITEM('overriding color',(#556447),#151955, + #556320); +#556447 = PRESENTATION_STYLE_ASSIGNMENT((#556448)); +#556448 = SURFACE_STYLE_USAGE(.BOTH.,#556449); +#556449 = SURFACE_SIDE_STYLE('',(#556450)); +#556450 = SURFACE_STYLE_FILL_AREA(#556451); +#556451 = FILL_AREA_STYLE('',(#556452)); +#556452 = FILL_AREA_STYLE_COLOUR('',#510798); +#556453 = OVER_RIDING_STYLED_ITEM('overriding color',(#556454),#151992, + #556320); +#556454 = PRESENTATION_STYLE_ASSIGNMENT((#556455)); +#556455 = SURFACE_STYLE_USAGE(.BOTH.,#556456); +#556456 = SURFACE_SIDE_STYLE('',(#556457)); +#556457 = SURFACE_STYLE_FILL_AREA(#556458); +#556458 = FILL_AREA_STYLE('',(#556459)); +#556459 = FILL_AREA_STYLE_COLOUR('',#510798); +#556460 = OVER_RIDING_STYLED_ITEM('overriding color',(#556461),#152029, + #556320); +#556461 = PRESENTATION_STYLE_ASSIGNMENT((#556462)); +#556462 = SURFACE_STYLE_USAGE(.BOTH.,#556463); +#556463 = SURFACE_SIDE_STYLE('',(#556464)); +#556464 = SURFACE_STYLE_FILL_AREA(#556465); +#556465 = FILL_AREA_STYLE('',(#556466)); +#556466 = FILL_AREA_STYLE_COLOUR('',#510798); +#556467 = OVER_RIDING_STYLED_ITEM('overriding color',(#556468),#152066, + #556320); +#556468 = PRESENTATION_STYLE_ASSIGNMENT((#556469)); +#556469 = SURFACE_STYLE_USAGE(.BOTH.,#556470); +#556470 = SURFACE_SIDE_STYLE('',(#556471)); +#556471 = SURFACE_STYLE_FILL_AREA(#556472); +#556472 = FILL_AREA_STYLE('',(#556473)); +#556473 = FILL_AREA_STYLE_COLOUR('',#510798); +#556474 = OVER_RIDING_STYLED_ITEM('overriding color',(#556475),#152094, + #556320); +#556475 = PRESENTATION_STYLE_ASSIGNMENT((#556476)); +#556476 = SURFACE_STYLE_USAGE(.BOTH.,#556477); +#556477 = SURFACE_SIDE_STYLE('',(#556478)); +#556478 = SURFACE_STYLE_FILL_AREA(#556479); +#556479 = FILL_AREA_STYLE('',(#556480)); +#556480 = FILL_AREA_STYLE_COLOUR('',#510798); +#556481 = OVER_RIDING_STYLED_ITEM('overriding color',(#556482),#152123, + #556320); +#556482 = PRESENTATION_STYLE_ASSIGNMENT((#556483)); +#556483 = SURFACE_STYLE_USAGE(.BOTH.,#556484); +#556484 = SURFACE_SIDE_STYLE('',(#556485)); +#556485 = SURFACE_STYLE_FILL_AREA(#556486); +#556486 = FILL_AREA_STYLE('',(#556487)); +#556487 = FILL_AREA_STYLE_COLOUR('',#510798); +#556488 = STYLED_ITEM('color',(#556489),#152152); +#556489 = PRESENTATION_STYLE_ASSIGNMENT((#556490)); +#556490 = SURFACE_STYLE_USAGE(.BOTH.,#556491); +#556491 = SURFACE_SIDE_STYLE('',(#556492)); +#556492 = SURFACE_STYLE_FILL_AREA(#556493); +#556493 = FILL_AREA_STYLE('',(#556494)); +#556494 = FILL_AREA_STYLE_COLOUR('',#521053); +#556495 = OVER_RIDING_STYLED_ITEM('overriding color',(#556496),#152154, + #556488); +#556496 = PRESENTATION_STYLE_ASSIGNMENT((#556497)); +#556497 = SURFACE_STYLE_USAGE(.BOTH.,#556498); +#556498 = SURFACE_SIDE_STYLE('',(#556499)); +#556499 = SURFACE_STYLE_FILL_AREA(#556500); +#556500 = FILL_AREA_STYLE('',(#556501)); +#556501 = FILL_AREA_STYLE_COLOUR('',#510798); +#556502 = OVER_RIDING_STYLED_ITEM('overriding color',(#556503),#152194, + #556488); +#556503 = PRESENTATION_STYLE_ASSIGNMENT((#556504)); +#556504 = SURFACE_STYLE_USAGE(.BOTH.,#556505); +#556505 = SURFACE_SIDE_STYLE('',(#556506)); +#556506 = SURFACE_STYLE_FILL_AREA(#556507); +#556507 = FILL_AREA_STYLE('',(#556508)); +#556508 = FILL_AREA_STYLE_COLOUR('',#510798); +#556509 = OVER_RIDING_STYLED_ITEM('overriding color',(#556510),#152225, + #556488); +#556510 = PRESENTATION_STYLE_ASSIGNMENT((#556511)); +#556511 = SURFACE_STYLE_USAGE(.BOTH.,#556512); +#556512 = SURFACE_SIDE_STYLE('',(#556513)); +#556513 = SURFACE_STYLE_FILL_AREA(#556514); +#556514 = FILL_AREA_STYLE('',(#556515)); +#556515 = FILL_AREA_STYLE_COLOUR('',#510798); +#556516 = OVER_RIDING_STYLED_ITEM('overriding color',(#556517),#152262, + #556488); +#556517 = PRESENTATION_STYLE_ASSIGNMENT((#556518)); +#556518 = SURFACE_STYLE_USAGE(.BOTH.,#556519); +#556519 = SURFACE_SIDE_STYLE('',(#556520)); +#556520 = SURFACE_STYLE_FILL_AREA(#556521); +#556521 = FILL_AREA_STYLE('',(#556522)); +#556522 = FILL_AREA_STYLE_COLOUR('',#510798); +#556523 = OVER_RIDING_STYLED_ITEM('overriding color',(#556524),#152293, + #556488); +#556524 = PRESENTATION_STYLE_ASSIGNMENT((#556525)); +#556525 = SURFACE_STYLE_USAGE(.BOTH.,#556526); +#556526 = SURFACE_SIDE_STYLE('',(#556527)); +#556527 = SURFACE_STYLE_FILL_AREA(#556528); +#556528 = FILL_AREA_STYLE('',(#556529)); +#556529 = FILL_AREA_STYLE_COLOUR('',#510798); +#556530 = OVER_RIDING_STYLED_ITEM('overriding color',(#556531),#152324, + #556488); +#556531 = PRESENTATION_STYLE_ASSIGNMENT((#556532)); +#556532 = SURFACE_STYLE_USAGE(.BOTH.,#556533); +#556533 = SURFACE_SIDE_STYLE('',(#556534)); +#556534 = SURFACE_STYLE_FILL_AREA(#556535); +#556535 = FILL_AREA_STYLE('',(#556536)); +#556536 = FILL_AREA_STYLE_COLOUR('',#510798); +#556537 = OVER_RIDING_STYLED_ITEM('overriding color',(#556538),#152355, + #556488); +#556538 = PRESENTATION_STYLE_ASSIGNMENT((#556539)); +#556539 = SURFACE_STYLE_USAGE(.BOTH.,#556540); +#556540 = SURFACE_SIDE_STYLE('',(#556541)); +#556541 = SURFACE_STYLE_FILL_AREA(#556542); +#556542 = FILL_AREA_STYLE('',(#556543)); +#556543 = FILL_AREA_STYLE_COLOUR('',#510798); +#556544 = OVER_RIDING_STYLED_ITEM('overriding color',(#556545),#152386, + #556488); +#556545 = PRESENTATION_STYLE_ASSIGNMENT((#556546)); +#556546 = SURFACE_STYLE_USAGE(.BOTH.,#556547); +#556547 = SURFACE_SIDE_STYLE('',(#556548)); +#556548 = SURFACE_STYLE_FILL_AREA(#556549); +#556549 = FILL_AREA_STYLE('',(#556550)); +#556550 = FILL_AREA_STYLE_COLOUR('',#510798); +#556551 = OVER_RIDING_STYLED_ITEM('overriding color',(#556552),#152417, + #556488); +#556552 = PRESENTATION_STYLE_ASSIGNMENT((#556553)); +#556553 = SURFACE_STYLE_USAGE(.BOTH.,#556554); +#556554 = SURFACE_SIDE_STYLE('',(#556555)); +#556555 = SURFACE_STYLE_FILL_AREA(#556556); +#556556 = FILL_AREA_STYLE('',(#556557)); +#556557 = FILL_AREA_STYLE_COLOUR('',#510798); +#556558 = OVER_RIDING_STYLED_ITEM('overriding color',(#556559),#152448, + #556488); +#556559 = PRESENTATION_STYLE_ASSIGNMENT((#556560)); +#556560 = SURFACE_STYLE_USAGE(.BOTH.,#556561); +#556561 = SURFACE_SIDE_STYLE('',(#556562)); +#556562 = SURFACE_STYLE_FILL_AREA(#556563); +#556563 = FILL_AREA_STYLE('',(#556564)); +#556564 = FILL_AREA_STYLE_COLOUR('',#510798); +#556565 = OVER_RIDING_STYLED_ITEM('overriding color',(#556566),#152485, + #556488); +#556566 = PRESENTATION_STYLE_ASSIGNMENT((#556567)); +#556567 = SURFACE_STYLE_USAGE(.BOTH.,#556568); +#556568 = SURFACE_SIDE_STYLE('',(#556569)); +#556569 = SURFACE_STYLE_FILL_AREA(#556570); +#556570 = FILL_AREA_STYLE('',(#556571)); +#556571 = FILL_AREA_STYLE_COLOUR('',#510798); +#556572 = OVER_RIDING_STYLED_ITEM('overriding color',(#556573),#152522, + #556488); +#556573 = PRESENTATION_STYLE_ASSIGNMENT((#556574)); +#556574 = SURFACE_STYLE_USAGE(.BOTH.,#556575); +#556575 = SURFACE_SIDE_STYLE('',(#556576)); +#556576 = SURFACE_STYLE_FILL_AREA(#556577); +#556577 = FILL_AREA_STYLE('',(#556578)); +#556578 = FILL_AREA_STYLE_COLOUR('',#510798); +#556579 = OVER_RIDING_STYLED_ITEM('overriding color',(#556580),#152553, + #556488); +#556580 = PRESENTATION_STYLE_ASSIGNMENT((#556581)); +#556581 = SURFACE_STYLE_USAGE(.BOTH.,#556582); +#556582 = SURFACE_SIDE_STYLE('',(#556583)); +#556583 = SURFACE_STYLE_FILL_AREA(#556584); +#556584 = FILL_AREA_STYLE('',(#556585)); +#556585 = FILL_AREA_STYLE_COLOUR('',#510798); +#556586 = OVER_RIDING_STYLED_ITEM('overriding color',(#556587),#152590, + #556488); +#556587 = PRESENTATION_STYLE_ASSIGNMENT((#556588)); +#556588 = SURFACE_STYLE_USAGE(.BOTH.,#556589); +#556589 = SURFACE_SIDE_STYLE('',(#556590)); +#556590 = SURFACE_STYLE_FILL_AREA(#556591); +#556591 = FILL_AREA_STYLE('',(#556592)); +#556592 = FILL_AREA_STYLE_COLOUR('',#510798); +#556593 = OVER_RIDING_STYLED_ITEM('overriding color',(#556594),#152627, + #556488); +#556594 = PRESENTATION_STYLE_ASSIGNMENT((#556595)); +#556595 = SURFACE_STYLE_USAGE(.BOTH.,#556596); +#556596 = SURFACE_SIDE_STYLE('',(#556597)); +#556597 = SURFACE_STYLE_FILL_AREA(#556598); +#556598 = FILL_AREA_STYLE('',(#556599)); +#556599 = FILL_AREA_STYLE_COLOUR('',#510798); +#556600 = OVER_RIDING_STYLED_ITEM('overriding color',(#556601),#152649, + #556488); +#556601 = PRESENTATION_STYLE_ASSIGNMENT((#556602)); +#556602 = SURFACE_STYLE_USAGE(.BOTH.,#556603); +#556603 = SURFACE_SIDE_STYLE('',(#556604)); +#556604 = SURFACE_STYLE_FILL_AREA(#556605); +#556605 = FILL_AREA_STYLE('',(#556606)); +#556606 = FILL_AREA_STYLE_COLOUR('',#510798); +#556607 = OVER_RIDING_STYLED_ITEM('overriding color',(#556608),#152672, + #556488); +#556608 = PRESENTATION_STYLE_ASSIGNMENT((#556609)); +#556609 = SURFACE_STYLE_USAGE(.BOTH.,#556610); +#556610 = SURFACE_SIDE_STYLE('',(#556611)); +#556611 = SURFACE_STYLE_FILL_AREA(#556612); +#556612 = FILL_AREA_STYLE('',(#556613)); +#556613 = FILL_AREA_STYLE_COLOUR('',#510798); +#556614 = STYLED_ITEM('color',(#556615),#152695); +#556615 = PRESENTATION_STYLE_ASSIGNMENT((#556616)); +#556616 = SURFACE_STYLE_USAGE(.BOTH.,#556617); +#556617 = SURFACE_SIDE_STYLE('',(#556618)); +#556618 = SURFACE_STYLE_FILL_AREA(#556619); +#556619 = FILL_AREA_STYLE('',(#556620)); +#556620 = FILL_AREA_STYLE_COLOUR('',#521053); +#556621 = OVER_RIDING_STYLED_ITEM('overriding color',(#556622),#152697, + #556614); +#556622 = PRESENTATION_STYLE_ASSIGNMENT((#556623)); +#556623 = SURFACE_STYLE_USAGE(.BOTH.,#556624); +#556624 = SURFACE_SIDE_STYLE('',(#556625)); +#556625 = SURFACE_STYLE_FILL_AREA(#556626); +#556626 = FILL_AREA_STYLE('',(#556627)); +#556627 = FILL_AREA_STYLE_COLOUR('',#510798); +#556628 = OVER_RIDING_STYLED_ITEM('overriding color',(#556629),#152737, + #556614); +#556629 = PRESENTATION_STYLE_ASSIGNMENT((#556630)); +#556630 = SURFACE_STYLE_USAGE(.BOTH.,#556631); +#556631 = SURFACE_SIDE_STYLE('',(#556632)); +#556632 = SURFACE_STYLE_FILL_AREA(#556633); +#556633 = FILL_AREA_STYLE('',(#556634)); +#556634 = FILL_AREA_STYLE_COLOUR('',#510798); +#556635 = OVER_RIDING_STYLED_ITEM('overriding color',(#556636),#152768, + #556614); +#556636 = PRESENTATION_STYLE_ASSIGNMENT((#556637)); +#556637 = SURFACE_STYLE_USAGE(.BOTH.,#556638); +#556638 = SURFACE_SIDE_STYLE('',(#556639)); +#556639 = SURFACE_STYLE_FILL_AREA(#556640); +#556640 = FILL_AREA_STYLE('',(#556641)); +#556641 = FILL_AREA_STYLE_COLOUR('',#510798); +#556642 = OVER_RIDING_STYLED_ITEM('overriding color',(#556643),#152799, + #556614); +#556643 = PRESENTATION_STYLE_ASSIGNMENT((#556644)); +#556644 = SURFACE_STYLE_USAGE(.BOTH.,#556645); +#556645 = SURFACE_SIDE_STYLE('',(#556646)); +#556646 = SURFACE_STYLE_FILL_AREA(#556647); +#556647 = FILL_AREA_STYLE('',(#556648)); +#556648 = FILL_AREA_STYLE_COLOUR('',#510798); +#556649 = OVER_RIDING_STYLED_ITEM('overriding color',(#556650),#152830, + #556614); +#556650 = PRESENTATION_STYLE_ASSIGNMENT((#556651)); +#556651 = SURFACE_STYLE_USAGE(.BOTH.,#556652); +#556652 = SURFACE_SIDE_STYLE('',(#556653)); +#556653 = SURFACE_STYLE_FILL_AREA(#556654); +#556654 = FILL_AREA_STYLE('',(#556655)); +#556655 = FILL_AREA_STYLE_COLOUR('',#510798); +#556656 = OVER_RIDING_STYLED_ITEM('overriding color',(#556657),#152861, + #556614); +#556657 = PRESENTATION_STYLE_ASSIGNMENT((#556658)); +#556658 = SURFACE_STYLE_USAGE(.BOTH.,#556659); +#556659 = SURFACE_SIDE_STYLE('',(#556660)); +#556660 = SURFACE_STYLE_FILL_AREA(#556661); +#556661 = FILL_AREA_STYLE('',(#556662)); +#556662 = FILL_AREA_STYLE_COLOUR('',#510798); +#556663 = OVER_RIDING_STYLED_ITEM('overriding color',(#556664),#152892, + #556614); +#556664 = PRESENTATION_STYLE_ASSIGNMENT((#556665)); +#556665 = SURFACE_STYLE_USAGE(.BOTH.,#556666); +#556666 = SURFACE_SIDE_STYLE('',(#556667)); +#556667 = SURFACE_STYLE_FILL_AREA(#556668); +#556668 = FILL_AREA_STYLE('',(#556669)); +#556669 = FILL_AREA_STYLE_COLOUR('',#510798); +#556670 = OVER_RIDING_STYLED_ITEM('overriding color',(#556671),#152923, + #556614); +#556671 = PRESENTATION_STYLE_ASSIGNMENT((#556672)); +#556672 = SURFACE_STYLE_USAGE(.BOTH.,#556673); +#556673 = SURFACE_SIDE_STYLE('',(#556674)); +#556674 = SURFACE_STYLE_FILL_AREA(#556675); +#556675 = FILL_AREA_STYLE('',(#556676)); +#556676 = FILL_AREA_STYLE_COLOUR('',#510798); +#556677 = OVER_RIDING_STYLED_ITEM('overriding color',(#556678),#152954, + #556614); +#556678 = PRESENTATION_STYLE_ASSIGNMENT((#556679)); +#556679 = SURFACE_STYLE_USAGE(.BOTH.,#556680); +#556680 = SURFACE_SIDE_STYLE('',(#556681)); +#556681 = SURFACE_STYLE_FILL_AREA(#556682); +#556682 = FILL_AREA_STYLE('',(#556683)); +#556683 = FILL_AREA_STYLE_COLOUR('',#510798); +#556684 = OVER_RIDING_STYLED_ITEM('overriding color',(#556685),#152985, + #556614); +#556685 = PRESENTATION_STYLE_ASSIGNMENT((#556686)); +#556686 = SURFACE_STYLE_USAGE(.BOTH.,#556687); +#556687 = SURFACE_SIDE_STYLE('',(#556688)); +#556688 = SURFACE_STYLE_FILL_AREA(#556689); +#556689 = FILL_AREA_STYLE('',(#556690)); +#556690 = FILL_AREA_STYLE_COLOUR('',#510798); +#556691 = OVER_RIDING_STYLED_ITEM('overriding color',(#556692),#153016, + #556614); +#556692 = PRESENTATION_STYLE_ASSIGNMENT((#556693)); +#556693 = SURFACE_STYLE_USAGE(.BOTH.,#556694); +#556694 = SURFACE_SIDE_STYLE('',(#556695)); +#556695 = SURFACE_STYLE_FILL_AREA(#556696); +#556696 = FILL_AREA_STYLE('',(#556697)); +#556697 = FILL_AREA_STYLE_COLOUR('',#510798); +#556698 = OVER_RIDING_STYLED_ITEM('overriding color',(#556699),#153047, + #556614); +#556699 = PRESENTATION_STYLE_ASSIGNMENT((#556700)); +#556700 = SURFACE_STYLE_USAGE(.BOTH.,#556701); +#556701 = SURFACE_SIDE_STYLE('',(#556702)); +#556702 = SURFACE_STYLE_FILL_AREA(#556703); +#556703 = FILL_AREA_STYLE('',(#556704)); +#556704 = FILL_AREA_STYLE_COLOUR('',#510798); +#556705 = OVER_RIDING_STYLED_ITEM('overriding color',(#556706),#153069, + #556614); +#556706 = PRESENTATION_STYLE_ASSIGNMENT((#556707)); +#556707 = SURFACE_STYLE_USAGE(.BOTH.,#556708); +#556708 = SURFACE_SIDE_STYLE('',(#556709)); +#556709 = SURFACE_STYLE_FILL_AREA(#556710); +#556710 = FILL_AREA_STYLE('',(#556711)); +#556711 = FILL_AREA_STYLE_COLOUR('',#510798); +#556712 = OVER_RIDING_STYLED_ITEM('overriding color',(#556713),#153089, + #556614); +#556713 = PRESENTATION_STYLE_ASSIGNMENT((#556714)); +#556714 = SURFACE_STYLE_USAGE(.BOTH.,#556715); +#556715 = SURFACE_SIDE_STYLE('',(#556716)); +#556716 = SURFACE_STYLE_FILL_AREA(#556717); +#556717 = FILL_AREA_STYLE('',(#556718)); +#556718 = FILL_AREA_STYLE_COLOUR('',#510798); +#556719 = STYLED_ITEM('color',(#556720),#153109); +#556720 = PRESENTATION_STYLE_ASSIGNMENT((#556721)); +#556721 = SURFACE_STYLE_USAGE(.BOTH.,#556722); +#556722 = SURFACE_SIDE_STYLE('',(#556723)); +#556723 = SURFACE_STYLE_FILL_AREA(#556724); +#556724 = FILL_AREA_STYLE('',(#556725)); +#556725 = FILL_AREA_STYLE_COLOUR('',#521053); +#556726 = OVER_RIDING_STYLED_ITEM('overriding color',(#556727),#153111, + #556719); +#556727 = PRESENTATION_STYLE_ASSIGNMENT((#556728)); +#556728 = SURFACE_STYLE_USAGE(.BOTH.,#556729); +#556729 = SURFACE_SIDE_STYLE('',(#556730)); +#556730 = SURFACE_STYLE_FILL_AREA(#556731); +#556731 = FILL_AREA_STYLE('',(#556732)); +#556732 = FILL_AREA_STYLE_COLOUR('',#510798); +#556733 = OVER_RIDING_STYLED_ITEM('overriding color',(#556734),#153241, + #556719); +#556734 = PRESENTATION_STYLE_ASSIGNMENT((#556735)); +#556735 = SURFACE_STYLE_USAGE(.BOTH.,#556736); +#556736 = SURFACE_SIDE_STYLE('',(#556737)); +#556737 = SURFACE_STYLE_FILL_AREA(#556738); +#556738 = FILL_AREA_STYLE('',(#556739)); +#556739 = FILL_AREA_STYLE_COLOUR('',#510798); +#556740 = OVER_RIDING_STYLED_ITEM('overriding color',(#556741),#153371, + #556719); +#556741 = PRESENTATION_STYLE_ASSIGNMENT((#556742)); +#556742 = SURFACE_STYLE_USAGE(.BOTH.,#556743); +#556743 = SURFACE_SIDE_STYLE('',(#556744)); +#556744 = SURFACE_STYLE_FILL_AREA(#556745); +#556745 = FILL_AREA_STYLE('',(#556746)); +#556746 = FILL_AREA_STYLE_COLOUR('',#510798); +#556747 = OVER_RIDING_STYLED_ITEM('overriding color',(#556748),#153393, + #556719); +#556748 = PRESENTATION_STYLE_ASSIGNMENT((#556749)); +#556749 = SURFACE_STYLE_USAGE(.BOTH.,#556750); +#556750 = SURFACE_SIDE_STYLE('',(#556751)); +#556751 = SURFACE_STYLE_FILL_AREA(#556752); +#556752 = FILL_AREA_STYLE('',(#556753)); +#556753 = FILL_AREA_STYLE_COLOUR('',#510798); +#556754 = OVER_RIDING_STYLED_ITEM('overriding color',(#556755),#153414, + #556719); +#556755 = PRESENTATION_STYLE_ASSIGNMENT((#556756)); +#556756 = SURFACE_STYLE_USAGE(.BOTH.,#556757); +#556757 = SURFACE_SIDE_STYLE('',(#556758)); +#556758 = SURFACE_STYLE_FILL_AREA(#556759); +#556759 = FILL_AREA_STYLE('',(#556760)); +#556760 = FILL_AREA_STYLE_COLOUR('',#510798); +#556761 = OVER_RIDING_STYLED_ITEM('overriding color',(#556762),#153435, + #556719); +#556762 = PRESENTATION_STYLE_ASSIGNMENT((#556763)); +#556763 = SURFACE_STYLE_USAGE(.BOTH.,#556764); +#556764 = SURFACE_SIDE_STYLE('',(#556765)); +#556765 = SURFACE_STYLE_FILL_AREA(#556766); +#556766 = FILL_AREA_STYLE('',(#556767)); +#556767 = FILL_AREA_STYLE_COLOUR('',#510798); +#556768 = OVER_RIDING_STYLED_ITEM('overriding color',(#556769),#153456, + #556719); +#556769 = PRESENTATION_STYLE_ASSIGNMENT((#556770)); +#556770 = SURFACE_STYLE_USAGE(.BOTH.,#556771); +#556771 = SURFACE_SIDE_STYLE('',(#556772)); +#556772 = SURFACE_STYLE_FILL_AREA(#556773); +#556773 = FILL_AREA_STYLE('',(#556774)); +#556774 = FILL_AREA_STYLE_COLOUR('',#510798); +#556775 = OVER_RIDING_STYLED_ITEM('overriding color',(#556776),#153477, + #556719); +#556776 = PRESENTATION_STYLE_ASSIGNMENT((#556777)); +#556777 = SURFACE_STYLE_USAGE(.BOTH.,#556778); +#556778 = SURFACE_SIDE_STYLE('',(#556779)); +#556779 = SURFACE_STYLE_FILL_AREA(#556780); +#556780 = FILL_AREA_STYLE('',(#556781)); +#556781 = FILL_AREA_STYLE_COLOUR('',#510798); +#556782 = OVER_RIDING_STYLED_ITEM('overriding color',(#556783),#153494, + #556719); +#556783 = PRESENTATION_STYLE_ASSIGNMENT((#556784)); +#556784 = SURFACE_STYLE_USAGE(.BOTH.,#556785); +#556785 = SURFACE_SIDE_STYLE('',(#556786)); +#556786 = SURFACE_STYLE_FILL_AREA(#556787); +#556787 = FILL_AREA_STYLE('',(#556788)); +#556788 = FILL_AREA_STYLE_COLOUR('',#510798); +#556789 = OVER_RIDING_STYLED_ITEM('overriding color',(#556790),#153506, + #556719); +#556790 = PRESENTATION_STYLE_ASSIGNMENT((#556791)); +#556791 = SURFACE_STYLE_USAGE(.BOTH.,#556792); +#556792 = SURFACE_SIDE_STYLE('',(#556793)); +#556793 = SURFACE_STYLE_FILL_AREA(#556794); +#556794 = FILL_AREA_STYLE('',(#556795)); +#556795 = FILL_AREA_STYLE_COLOUR('',#510798); +#556796 = OVER_RIDING_STYLED_ITEM('overriding color',(#556797),#153528, + #556719); +#556797 = PRESENTATION_STYLE_ASSIGNMENT((#556798)); +#556798 = SURFACE_STYLE_USAGE(.BOTH.,#556799); +#556799 = SURFACE_SIDE_STYLE('',(#556800)); +#556800 = SURFACE_STYLE_FILL_AREA(#556801); +#556801 = FILL_AREA_STYLE('',(#556802)); +#556802 = FILL_AREA_STYLE_COLOUR('',#510798); +#556803 = OVER_RIDING_STYLED_ITEM('overriding color',(#556804),#153545, + #556719); +#556804 = PRESENTATION_STYLE_ASSIGNMENT((#556805)); +#556805 = SURFACE_STYLE_USAGE(.BOTH.,#556806); +#556806 = SURFACE_SIDE_STYLE('',(#556807)); +#556807 = SURFACE_STYLE_FILL_AREA(#556808); +#556808 = FILL_AREA_STYLE('',(#556809)); +#556809 = FILL_AREA_STYLE_COLOUR('',#510798); +#556810 = OVER_RIDING_STYLED_ITEM('overriding color',(#556811),#153562, + #556719); +#556811 = PRESENTATION_STYLE_ASSIGNMENT((#556812)); +#556812 = SURFACE_STYLE_USAGE(.BOTH.,#556813); +#556813 = SURFACE_SIDE_STYLE('',(#556814)); +#556814 = SURFACE_STYLE_FILL_AREA(#556815); +#556815 = FILL_AREA_STYLE('',(#556816)); +#556816 = FILL_AREA_STYLE_COLOUR('',#510798); +#556817 = OVER_RIDING_STYLED_ITEM('overriding color',(#556818),#153583, + #556719); +#556818 = PRESENTATION_STYLE_ASSIGNMENT((#556819)); +#556819 = SURFACE_STYLE_USAGE(.BOTH.,#556820); +#556820 = SURFACE_SIDE_STYLE('',(#556821)); +#556821 = SURFACE_STYLE_FILL_AREA(#556822); +#556822 = FILL_AREA_STYLE('',(#556823)); +#556823 = FILL_AREA_STYLE_COLOUR('',#510798); +#556824 = OVER_RIDING_STYLED_ITEM('overriding color',(#556825),#153604, + #556719); +#556825 = PRESENTATION_STYLE_ASSIGNMENT((#556826)); +#556826 = SURFACE_STYLE_USAGE(.BOTH.,#556827); +#556827 = SURFACE_SIDE_STYLE('',(#556828)); +#556828 = SURFACE_STYLE_FILL_AREA(#556829); +#556829 = FILL_AREA_STYLE('',(#556830)); +#556830 = FILL_AREA_STYLE_COLOUR('',#510798); +#556831 = OVER_RIDING_STYLED_ITEM('overriding color',(#556832),#153625, + #556719); +#556832 = PRESENTATION_STYLE_ASSIGNMENT((#556833)); +#556833 = SURFACE_STYLE_USAGE(.BOTH.,#556834); +#556834 = SURFACE_SIDE_STYLE('',(#556835)); +#556835 = SURFACE_STYLE_FILL_AREA(#556836); +#556836 = FILL_AREA_STYLE('',(#556837)); +#556837 = FILL_AREA_STYLE_COLOUR('',#510798); +#556838 = STYLED_ITEM('color',(#556839),#153641); +#556839 = PRESENTATION_STYLE_ASSIGNMENT((#556840)); +#556840 = SURFACE_STYLE_USAGE(.BOTH.,#556841); +#556841 = SURFACE_SIDE_STYLE('',(#556842)); +#556842 = SURFACE_STYLE_FILL_AREA(#556843); +#556843 = FILL_AREA_STYLE('',(#556844)); +#556844 = FILL_AREA_STYLE_COLOUR('',#521053); +#556845 = OVER_RIDING_STYLED_ITEM('overriding color',(#556846),#153643, + #556838); +#556846 = PRESENTATION_STYLE_ASSIGNMENT((#556847)); +#556847 = SURFACE_STYLE_USAGE(.BOTH.,#556848); +#556848 = SURFACE_SIDE_STYLE('',(#556849)); +#556849 = SURFACE_STYLE_FILL_AREA(#556850); +#556850 = FILL_AREA_STYLE('',(#556851)); +#556851 = FILL_AREA_STYLE_COLOUR('',#510798); +#556852 = OVER_RIDING_STYLED_ITEM('overriding color',(#556853),#153767, + #556838); +#556853 = PRESENTATION_STYLE_ASSIGNMENT((#556854)); +#556854 = SURFACE_STYLE_USAGE(.BOTH.,#556855); +#556855 = SURFACE_SIDE_STYLE('',(#556856)); +#556856 = SURFACE_STYLE_FILL_AREA(#556857); +#556857 = FILL_AREA_STYLE('',(#556858)); +#556858 = FILL_AREA_STYLE_COLOUR('',#510798); +#556859 = OVER_RIDING_STYLED_ITEM('overriding color',(#556860),#153891, + #556838); +#556860 = PRESENTATION_STYLE_ASSIGNMENT((#556861)); +#556861 = SURFACE_STYLE_USAGE(.BOTH.,#556862); +#556862 = SURFACE_SIDE_STYLE('',(#556863)); +#556863 = SURFACE_STYLE_FILL_AREA(#556864); +#556864 = FILL_AREA_STYLE('',(#556865)); +#556865 = FILL_AREA_STYLE_COLOUR('',#510798); +#556866 = OVER_RIDING_STYLED_ITEM('overriding color',(#556867),#153913, + #556838); +#556867 = PRESENTATION_STYLE_ASSIGNMENT((#556868)); +#556868 = SURFACE_STYLE_USAGE(.BOTH.,#556869); +#556869 = SURFACE_SIDE_STYLE('',(#556870)); +#556870 = SURFACE_STYLE_FILL_AREA(#556871); +#556871 = FILL_AREA_STYLE('',(#556872)); +#556872 = FILL_AREA_STYLE_COLOUR('',#510798); +#556873 = OVER_RIDING_STYLED_ITEM('overriding color',(#556874),#153930, + #556838); +#556874 = PRESENTATION_STYLE_ASSIGNMENT((#556875)); +#556875 = SURFACE_STYLE_USAGE(.BOTH.,#556876); +#556876 = SURFACE_SIDE_STYLE('',(#556877)); +#556877 = SURFACE_STYLE_FILL_AREA(#556878); +#556878 = FILL_AREA_STYLE('',(#556879)); +#556879 = FILL_AREA_STYLE_COLOUR('',#510798); +#556880 = OVER_RIDING_STYLED_ITEM('overriding color',(#556881),#153947, + #556838); +#556881 = PRESENTATION_STYLE_ASSIGNMENT((#556882)); +#556882 = SURFACE_STYLE_USAGE(.BOTH.,#556883); +#556883 = SURFACE_SIDE_STYLE('',(#556884)); +#556884 = SURFACE_STYLE_FILL_AREA(#556885); +#556885 = FILL_AREA_STYLE('',(#556886)); +#556886 = FILL_AREA_STYLE_COLOUR('',#510798); +#556887 = OVER_RIDING_STYLED_ITEM('overriding color',(#556888),#153964, + #556838); +#556888 = PRESENTATION_STYLE_ASSIGNMENT((#556889)); +#556889 = SURFACE_STYLE_USAGE(.BOTH.,#556890); +#556890 = SURFACE_SIDE_STYLE('',(#556891)); +#556891 = SURFACE_STYLE_FILL_AREA(#556892); +#556892 = FILL_AREA_STYLE('',(#556893)); +#556893 = FILL_AREA_STYLE_COLOUR('',#510798); +#556894 = OVER_RIDING_STYLED_ITEM('overriding color',(#556895),#153981, + #556838); +#556895 = PRESENTATION_STYLE_ASSIGNMENT((#556896)); +#556896 = SURFACE_STYLE_USAGE(.BOTH.,#556897); +#556897 = SURFACE_SIDE_STYLE('',(#556898)); +#556898 = SURFACE_STYLE_FILL_AREA(#556899); +#556899 = FILL_AREA_STYLE('',(#556900)); +#556900 = FILL_AREA_STYLE_COLOUR('',#510798); +#556901 = OVER_RIDING_STYLED_ITEM('overriding color',(#556902),#153998, + #556838); +#556902 = PRESENTATION_STYLE_ASSIGNMENT((#556903)); +#556903 = SURFACE_STYLE_USAGE(.BOTH.,#556904); +#556904 = SURFACE_SIDE_STYLE('',(#556905)); +#556905 = SURFACE_STYLE_FILL_AREA(#556906); +#556906 = FILL_AREA_STYLE('',(#556907)); +#556907 = FILL_AREA_STYLE_COLOUR('',#510798); +#556908 = OVER_RIDING_STYLED_ITEM('overriding color',(#556909),#154015, + #556838); +#556909 = PRESENTATION_STYLE_ASSIGNMENT((#556910)); +#556910 = SURFACE_STYLE_USAGE(.BOTH.,#556911); +#556911 = SURFACE_SIDE_STYLE('',(#556912)); +#556912 = SURFACE_STYLE_FILL_AREA(#556913); +#556913 = FILL_AREA_STYLE('',(#556914)); +#556914 = FILL_AREA_STYLE_COLOUR('',#510798); +#556915 = OVER_RIDING_STYLED_ITEM('overriding color',(#556916),#154027, + #556838); +#556916 = PRESENTATION_STYLE_ASSIGNMENT((#556917)); +#556917 = SURFACE_STYLE_USAGE(.BOTH.,#556918); +#556918 = SURFACE_SIDE_STYLE('',(#556919)); +#556919 = SURFACE_STYLE_FILL_AREA(#556920); +#556920 = FILL_AREA_STYLE('',(#556921)); +#556921 = FILL_AREA_STYLE_COLOUR('',#510798); +#556922 = OVER_RIDING_STYLED_ITEM('overriding color',(#556923),#154049, + #556838); +#556923 = PRESENTATION_STYLE_ASSIGNMENT((#556924)); +#556924 = SURFACE_STYLE_USAGE(.BOTH.,#556925); +#556925 = SURFACE_SIDE_STYLE('',(#556926)); +#556926 = SURFACE_STYLE_FILL_AREA(#556927); +#556927 = FILL_AREA_STYLE('',(#556928)); +#556928 = FILL_AREA_STYLE_COLOUR('',#510798); +#556929 = OVER_RIDING_STYLED_ITEM('overriding color',(#556930),#154066, + #556838); +#556930 = PRESENTATION_STYLE_ASSIGNMENT((#556931)); +#556931 = SURFACE_STYLE_USAGE(.BOTH.,#556932); +#556932 = SURFACE_SIDE_STYLE('',(#556933)); +#556933 = SURFACE_STYLE_FILL_AREA(#556934); +#556934 = FILL_AREA_STYLE('',(#556935)); +#556935 = FILL_AREA_STYLE_COLOUR('',#510798); +#556936 = OVER_RIDING_STYLED_ITEM('overriding color',(#556937),#154087, + #556838); +#556937 = PRESENTATION_STYLE_ASSIGNMENT((#556938)); +#556938 = SURFACE_STYLE_USAGE(.BOTH.,#556939); +#556939 = SURFACE_SIDE_STYLE('',(#556940)); +#556940 = SURFACE_STYLE_FILL_AREA(#556941); +#556941 = FILL_AREA_STYLE('',(#556942)); +#556942 = FILL_AREA_STYLE_COLOUR('',#510798); +#556943 = OVER_RIDING_STYLED_ITEM('overriding color',(#556944),#154104, + #556838); +#556944 = PRESENTATION_STYLE_ASSIGNMENT((#556945)); +#556945 = SURFACE_STYLE_USAGE(.BOTH.,#556946); +#556946 = SURFACE_SIDE_STYLE('',(#556947)); +#556947 = SURFACE_STYLE_FILL_AREA(#556948); +#556948 = FILL_AREA_STYLE('',(#556949)); +#556949 = FILL_AREA_STYLE_COLOUR('',#510798); +#556950 = OVER_RIDING_STYLED_ITEM('overriding color',(#556951),#154125, + #556838); +#556951 = PRESENTATION_STYLE_ASSIGNMENT((#556952)); +#556952 = SURFACE_STYLE_USAGE(.BOTH.,#556953); +#556953 = SURFACE_SIDE_STYLE('',(#556954)); +#556954 = SURFACE_STYLE_FILL_AREA(#556955); +#556955 = FILL_AREA_STYLE('',(#556956)); +#556956 = FILL_AREA_STYLE_COLOUR('',#510798); +#556957 = STYLED_ITEM('color',(#556958),#154137); +#556958 = PRESENTATION_STYLE_ASSIGNMENT((#556959)); +#556959 = SURFACE_STYLE_USAGE(.BOTH.,#556960); +#556960 = SURFACE_SIDE_STYLE('',(#556961)); +#556961 = SURFACE_STYLE_FILL_AREA(#556962); +#556962 = FILL_AREA_STYLE('',(#556963)); +#556963 = FILL_AREA_STYLE_COLOUR('',#521053); +#556964 = OVER_RIDING_STYLED_ITEM('overriding color',(#556965),#154139, + #556957); +#556965 = PRESENTATION_STYLE_ASSIGNMENT((#556966)); +#556966 = SURFACE_STYLE_USAGE(.BOTH.,#556967); +#556967 = SURFACE_SIDE_STYLE('',(#556968)); +#556968 = SURFACE_STYLE_FILL_AREA(#556969); +#556969 = FILL_AREA_STYLE('',(#556970)); +#556970 = FILL_AREA_STYLE_COLOUR('',#510798); +#556971 = OVER_RIDING_STYLED_ITEM('overriding color',(#556972),#154464, + #556957); +#556972 = PRESENTATION_STYLE_ASSIGNMENT((#556973)); +#556973 = SURFACE_STYLE_USAGE(.BOTH.,#556974); +#556974 = SURFACE_SIDE_STYLE('',(#556975)); +#556975 = SURFACE_STYLE_FILL_AREA(#556976); +#556976 = FILL_AREA_STYLE('',(#556977)); +#556977 = FILL_AREA_STYLE_COLOUR('',#510798); +#556978 = OVER_RIDING_STYLED_ITEM('overriding color',(#556979),#154789, + #556957); +#556979 = PRESENTATION_STYLE_ASSIGNMENT((#556980)); +#556980 = SURFACE_STYLE_USAGE(.BOTH.,#556981); +#556981 = SURFACE_SIDE_STYLE('',(#556982)); +#556982 = SURFACE_STYLE_FILL_AREA(#556983); +#556983 = FILL_AREA_STYLE('',(#556984)); +#556984 = FILL_AREA_STYLE_COLOUR('',#510798); +#556985 = OVER_RIDING_STYLED_ITEM('overriding color',(#556986),#154815, + #556957); +#556986 = PRESENTATION_STYLE_ASSIGNMENT((#556987)); +#556987 = SURFACE_STYLE_USAGE(.BOTH.,#556988); +#556988 = SURFACE_SIDE_STYLE('',(#556989)); +#556989 = SURFACE_STYLE_FILL_AREA(#556990); +#556990 = FILL_AREA_STYLE('',(#556991)); +#556991 = FILL_AREA_STYLE_COLOUR('',#510798); +#556992 = OVER_RIDING_STYLED_ITEM('overriding color',(#556993),#154836, + #556957); +#556993 = PRESENTATION_STYLE_ASSIGNMENT((#556994)); +#556994 = SURFACE_STYLE_USAGE(.BOTH.,#556995); +#556995 = SURFACE_SIDE_STYLE('',(#556996)); +#556996 = SURFACE_STYLE_FILL_AREA(#556997); +#556997 = FILL_AREA_STYLE('',(#556998)); +#556998 = FILL_AREA_STYLE_COLOUR('',#510798); +#556999 = OVER_RIDING_STYLED_ITEM('overriding color',(#557000),#154857, + #556957); +#557000 = PRESENTATION_STYLE_ASSIGNMENT((#557001)); +#557001 = SURFACE_STYLE_USAGE(.BOTH.,#557002); +#557002 = SURFACE_SIDE_STYLE('',(#557003)); +#557003 = SURFACE_STYLE_FILL_AREA(#557004); +#557004 = FILL_AREA_STYLE('',(#557005)); +#557005 = FILL_AREA_STYLE_COLOUR('',#510798); +#557006 = OVER_RIDING_STYLED_ITEM('overriding color',(#557007),#154878, + #556957); +#557007 = PRESENTATION_STYLE_ASSIGNMENT((#557008)); +#557008 = SURFACE_STYLE_USAGE(.BOTH.,#557009); +#557009 = SURFACE_SIDE_STYLE('',(#557010)); +#557010 = SURFACE_STYLE_FILL_AREA(#557011); +#557011 = FILL_AREA_STYLE('',(#557012)); +#557012 = FILL_AREA_STYLE_COLOUR('',#510798); +#557013 = OVER_RIDING_STYLED_ITEM('overriding color',(#557014),#154899, + #556957); +#557014 = PRESENTATION_STYLE_ASSIGNMENT((#557015)); +#557015 = SURFACE_STYLE_USAGE(.BOTH.,#557016); +#557016 = SURFACE_SIDE_STYLE('',(#557017)); +#557017 = SURFACE_STYLE_FILL_AREA(#557018); +#557018 = FILL_AREA_STYLE('',(#557019)); +#557019 = FILL_AREA_STYLE_COLOUR('',#510798); +#557020 = OVER_RIDING_STYLED_ITEM('overriding color',(#557021),#154920, + #556957); +#557021 = PRESENTATION_STYLE_ASSIGNMENT((#557022)); +#557022 = SURFACE_STYLE_USAGE(.BOTH.,#557023); +#557023 = SURFACE_SIDE_STYLE('',(#557024)); +#557024 = SURFACE_STYLE_FILL_AREA(#557025); +#557025 = FILL_AREA_STYLE('',(#557026)); +#557026 = FILL_AREA_STYLE_COLOUR('',#510798); +#557027 = OVER_RIDING_STYLED_ITEM('overriding color',(#557028),#154941, + #556957); +#557028 = PRESENTATION_STYLE_ASSIGNMENT((#557029)); +#557029 = SURFACE_STYLE_USAGE(.BOTH.,#557030); +#557030 = SURFACE_SIDE_STYLE('',(#557031)); +#557031 = SURFACE_STYLE_FILL_AREA(#557032); +#557032 = FILL_AREA_STYLE('',(#557033)); +#557033 = FILL_AREA_STYLE_COLOUR('',#510798); +#557034 = OVER_RIDING_STYLED_ITEM('overriding color',(#557035),#154962, + #556957); +#557035 = PRESENTATION_STYLE_ASSIGNMENT((#557036)); +#557036 = SURFACE_STYLE_USAGE(.BOTH.,#557037); +#557037 = SURFACE_SIDE_STYLE('',(#557038)); +#557038 = SURFACE_STYLE_FILL_AREA(#557039); +#557039 = FILL_AREA_STYLE('',(#557040)); +#557040 = FILL_AREA_STYLE_COLOUR('',#510798); +#557041 = OVER_RIDING_STYLED_ITEM('overriding color',(#557042),#154983, + #556957); +#557042 = PRESENTATION_STYLE_ASSIGNMENT((#557043)); +#557043 = SURFACE_STYLE_USAGE(.BOTH.,#557044); +#557044 = SURFACE_SIDE_STYLE('',(#557045)); +#557045 = SURFACE_STYLE_FILL_AREA(#557046); +#557046 = FILL_AREA_STYLE('',(#557047)); +#557047 = FILL_AREA_STYLE_COLOUR('',#510798); +#557048 = OVER_RIDING_STYLED_ITEM('overriding color',(#557049),#155004, + #556957); +#557049 = PRESENTATION_STYLE_ASSIGNMENT((#557050)); +#557050 = SURFACE_STYLE_USAGE(.BOTH.,#557051); +#557051 = SURFACE_SIDE_STYLE('',(#557052)); +#557052 = SURFACE_STYLE_FILL_AREA(#557053); +#557053 = FILL_AREA_STYLE('',(#557054)); +#557054 = FILL_AREA_STYLE_COLOUR('',#510798); +#557055 = OVER_RIDING_STYLED_ITEM('overriding color',(#557056),#155025, + #556957); +#557056 = PRESENTATION_STYLE_ASSIGNMENT((#557057)); +#557057 = SURFACE_STYLE_USAGE(.BOTH.,#557058); +#557058 = SURFACE_SIDE_STYLE('',(#557059)); +#557059 = SURFACE_STYLE_FILL_AREA(#557060); +#557060 = FILL_AREA_STYLE('',(#557061)); +#557061 = FILL_AREA_STYLE_COLOUR('',#510798); +#557062 = OVER_RIDING_STYLED_ITEM('overriding color',(#557063),#155046, + #556957); +#557063 = PRESENTATION_STYLE_ASSIGNMENT((#557064)); +#557064 = SURFACE_STYLE_USAGE(.BOTH.,#557065); +#557065 = SURFACE_SIDE_STYLE('',(#557066)); +#557066 = SURFACE_STYLE_FILL_AREA(#557067); +#557067 = FILL_AREA_STYLE('',(#557068)); +#557068 = FILL_AREA_STYLE_COLOUR('',#510798); +#557069 = OVER_RIDING_STYLED_ITEM('overriding color',(#557070),#155063, + #556957); +#557070 = PRESENTATION_STYLE_ASSIGNMENT((#557071)); +#557071 = SURFACE_STYLE_USAGE(.BOTH.,#557072); +#557072 = SURFACE_SIDE_STYLE('',(#557073)); +#557073 = SURFACE_STYLE_FILL_AREA(#557074); +#557074 = FILL_AREA_STYLE('',(#557075)); +#557075 = FILL_AREA_STYLE_COLOUR('',#510798); +#557076 = OVER_RIDING_STYLED_ITEM('overriding color',(#557077),#155080, + #556957); +#557077 = PRESENTATION_STYLE_ASSIGNMENT((#557078)); +#557078 = SURFACE_STYLE_USAGE(.BOTH.,#557079); +#557079 = SURFACE_SIDE_STYLE('',(#557080)); +#557080 = SURFACE_STYLE_FILL_AREA(#557081); +#557081 = FILL_AREA_STYLE('',(#557082)); +#557082 = FILL_AREA_STYLE_COLOUR('',#510798); +#557083 = OVER_RIDING_STYLED_ITEM('overriding color',(#557084),#155097, + #556957); +#557084 = PRESENTATION_STYLE_ASSIGNMENT((#557085)); +#557085 = SURFACE_STYLE_USAGE(.BOTH.,#557086); +#557086 = SURFACE_SIDE_STYLE('',(#557087)); +#557087 = SURFACE_STYLE_FILL_AREA(#557088); +#557088 = FILL_AREA_STYLE('',(#557089)); +#557089 = FILL_AREA_STYLE_COLOUR('',#510798); +#557090 = OVER_RIDING_STYLED_ITEM('overriding color',(#557091),#155114, + #556957); +#557091 = PRESENTATION_STYLE_ASSIGNMENT((#557092)); +#557092 = SURFACE_STYLE_USAGE(.BOTH.,#557093); +#557093 = SURFACE_SIDE_STYLE('',(#557094)); +#557094 = SURFACE_STYLE_FILL_AREA(#557095); +#557095 = FILL_AREA_STYLE('',(#557096)); +#557096 = FILL_AREA_STYLE_COLOUR('',#510798); +#557097 = OVER_RIDING_STYLED_ITEM('overriding color',(#557098),#155135, + #556957); +#557098 = PRESENTATION_STYLE_ASSIGNMENT((#557099)); +#557099 = SURFACE_STYLE_USAGE(.BOTH.,#557100); +#557100 = SURFACE_SIDE_STYLE('',(#557101)); +#557101 = SURFACE_STYLE_FILL_AREA(#557102); +#557102 = FILL_AREA_STYLE('',(#557103)); +#557103 = FILL_AREA_STYLE_COLOUR('',#510798); +#557104 = OVER_RIDING_STYLED_ITEM('overriding color',(#557105),#155156, + #556957); +#557105 = PRESENTATION_STYLE_ASSIGNMENT((#557106)); +#557106 = SURFACE_STYLE_USAGE(.BOTH.,#557107); +#557107 = SURFACE_SIDE_STYLE('',(#557108)); +#557108 = SURFACE_STYLE_FILL_AREA(#557109); +#557109 = FILL_AREA_STYLE('',(#557110)); +#557110 = FILL_AREA_STYLE_COLOUR('',#510798); +#557111 = OVER_RIDING_STYLED_ITEM('overriding color',(#557112),#155177, + #556957); +#557112 = PRESENTATION_STYLE_ASSIGNMENT((#557113)); +#557113 = SURFACE_STYLE_USAGE(.BOTH.,#557114); +#557114 = SURFACE_SIDE_STYLE('',(#557115)); +#557115 = SURFACE_STYLE_FILL_AREA(#557116); +#557116 = FILL_AREA_STYLE('',(#557117)); +#557117 = FILL_AREA_STYLE_COLOUR('',#510798); +#557118 = OVER_RIDING_STYLED_ITEM('overriding color',(#557119),#155198, + #556957); +#557119 = PRESENTATION_STYLE_ASSIGNMENT((#557120)); +#557120 = SURFACE_STYLE_USAGE(.BOTH.,#557121); +#557121 = SURFACE_SIDE_STYLE('',(#557122)); +#557122 = SURFACE_STYLE_FILL_AREA(#557123); +#557123 = FILL_AREA_STYLE('',(#557124)); +#557124 = FILL_AREA_STYLE_COLOUR('',#510798); +#557125 = OVER_RIDING_STYLED_ITEM('overriding color',(#557126),#155219, + #556957); +#557126 = PRESENTATION_STYLE_ASSIGNMENT((#557127)); +#557127 = SURFACE_STYLE_USAGE(.BOTH.,#557128); +#557128 = SURFACE_SIDE_STYLE('',(#557129)); +#557129 = SURFACE_STYLE_FILL_AREA(#557130); +#557130 = FILL_AREA_STYLE('',(#557131)); +#557131 = FILL_AREA_STYLE_COLOUR('',#510798); +#557132 = OVER_RIDING_STYLED_ITEM('overriding color',(#557133),#155240, + #556957); +#557133 = PRESENTATION_STYLE_ASSIGNMENT((#557134)); +#557134 = SURFACE_STYLE_USAGE(.BOTH.,#557135); +#557135 = SURFACE_SIDE_STYLE('',(#557136)); +#557136 = SURFACE_STYLE_FILL_AREA(#557137); +#557137 = FILL_AREA_STYLE('',(#557138)); +#557138 = FILL_AREA_STYLE_COLOUR('',#510798); +#557139 = OVER_RIDING_STYLED_ITEM('overriding color',(#557140),#155261, + #556957); +#557140 = PRESENTATION_STYLE_ASSIGNMENT((#557141)); +#557141 = SURFACE_STYLE_USAGE(.BOTH.,#557142); +#557142 = SURFACE_SIDE_STYLE('',(#557143)); +#557143 = SURFACE_STYLE_FILL_AREA(#557144); +#557144 = FILL_AREA_STYLE('',(#557145)); +#557145 = FILL_AREA_STYLE_COLOUR('',#510798); +#557146 = OVER_RIDING_STYLED_ITEM('overriding color',(#557147),#155278, + #556957); +#557147 = PRESENTATION_STYLE_ASSIGNMENT((#557148)); +#557148 = SURFACE_STYLE_USAGE(.BOTH.,#557149); +#557149 = SURFACE_SIDE_STYLE('',(#557150)); +#557150 = SURFACE_STYLE_FILL_AREA(#557151); +#557151 = FILL_AREA_STYLE('',(#557152)); +#557152 = FILL_AREA_STYLE_COLOUR('',#510798); +#557153 = OVER_RIDING_STYLED_ITEM('overriding color',(#557154),#155299, + #556957); +#557154 = PRESENTATION_STYLE_ASSIGNMENT((#557155)); +#557155 = SURFACE_STYLE_USAGE(.BOTH.,#557156); +#557156 = SURFACE_SIDE_STYLE('',(#557157)); +#557157 = SURFACE_STYLE_FILL_AREA(#557158); +#557158 = FILL_AREA_STYLE('',(#557159)); +#557159 = FILL_AREA_STYLE_COLOUR('',#510798); +#557160 = OVER_RIDING_STYLED_ITEM('overriding color',(#557161),#155320, + #556957); +#557161 = PRESENTATION_STYLE_ASSIGNMENT((#557162)); +#557162 = SURFACE_STYLE_USAGE(.BOTH.,#557163); +#557163 = SURFACE_SIDE_STYLE('',(#557164)); +#557164 = SURFACE_STYLE_FILL_AREA(#557165); +#557165 = FILL_AREA_STYLE('',(#557166)); +#557166 = FILL_AREA_STYLE_COLOUR('',#510798); +#557167 = OVER_RIDING_STYLED_ITEM('overriding color',(#557168),#155337, + #556957); +#557168 = PRESENTATION_STYLE_ASSIGNMENT((#557169)); +#557169 = SURFACE_STYLE_USAGE(.BOTH.,#557170); +#557170 = SURFACE_SIDE_STYLE('',(#557171)); +#557171 = SURFACE_STYLE_FILL_AREA(#557172); +#557172 = FILL_AREA_STYLE('',(#557173)); +#557173 = FILL_AREA_STYLE_COLOUR('',#510798); +#557174 = OVER_RIDING_STYLED_ITEM('overriding color',(#557175),#155358, + #556957); +#557175 = PRESENTATION_STYLE_ASSIGNMENT((#557176)); +#557176 = SURFACE_STYLE_USAGE(.BOTH.,#557177); +#557177 = SURFACE_SIDE_STYLE('',(#557178)); +#557178 = SURFACE_STYLE_FILL_AREA(#557179); +#557179 = FILL_AREA_STYLE('',(#557180)); +#557180 = FILL_AREA_STYLE_COLOUR('',#510798); +#557181 = OVER_RIDING_STYLED_ITEM('overriding color',(#557182),#155379, + #556957); +#557182 = PRESENTATION_STYLE_ASSIGNMENT((#557183)); +#557183 = SURFACE_STYLE_USAGE(.BOTH.,#557184); +#557184 = SURFACE_SIDE_STYLE('',(#557185)); +#557185 = SURFACE_STYLE_FILL_AREA(#557186); +#557186 = FILL_AREA_STYLE('',(#557187)); +#557187 = FILL_AREA_STYLE_COLOUR('',#510798); +#557188 = OVER_RIDING_STYLED_ITEM('overriding color',(#557189),#155400, + #556957); +#557189 = PRESENTATION_STYLE_ASSIGNMENT((#557190)); +#557190 = SURFACE_STYLE_USAGE(.BOTH.,#557191); +#557191 = SURFACE_SIDE_STYLE('',(#557192)); +#557192 = SURFACE_STYLE_FILL_AREA(#557193); +#557193 = FILL_AREA_STYLE('',(#557194)); +#557194 = FILL_AREA_STYLE_COLOUR('',#510798); +#557195 = OVER_RIDING_STYLED_ITEM('overriding color',(#557196),#155417, + #556957); +#557196 = PRESENTATION_STYLE_ASSIGNMENT((#557197)); +#557197 = SURFACE_STYLE_USAGE(.BOTH.,#557198); +#557198 = SURFACE_SIDE_STYLE('',(#557199)); +#557199 = SURFACE_STYLE_FILL_AREA(#557200); +#557200 = FILL_AREA_STYLE('',(#557201)); +#557201 = FILL_AREA_STYLE_COLOUR('',#510798); +#557202 = OVER_RIDING_STYLED_ITEM('overriding color',(#557203),#155438, + #556957); +#557203 = PRESENTATION_STYLE_ASSIGNMENT((#557204)); +#557204 = SURFACE_STYLE_USAGE(.BOTH.,#557205); +#557205 = SURFACE_SIDE_STYLE('',(#557206)); +#557206 = SURFACE_STYLE_FILL_AREA(#557207); +#557207 = FILL_AREA_STYLE('',(#557208)); +#557208 = FILL_AREA_STYLE_COLOUR('',#510798); +#557209 = OVER_RIDING_STYLED_ITEM('overriding color',(#557210),#155454, + #556957); +#557210 = PRESENTATION_STYLE_ASSIGNMENT((#557211)); +#557211 = SURFACE_STYLE_USAGE(.BOTH.,#557212); +#557212 = SURFACE_SIDE_STYLE('',(#557213)); +#557213 = SURFACE_STYLE_FILL_AREA(#557214); +#557214 = FILL_AREA_STYLE('',(#557215)); +#557215 = FILL_AREA_STYLE_COLOUR('',#510798); +#557216 = OVER_RIDING_STYLED_ITEM('overriding color',(#557217),#155486, + #556957); +#557217 = PRESENTATION_STYLE_ASSIGNMENT((#557218)); +#557218 = SURFACE_STYLE_USAGE(.BOTH.,#557219); +#557219 = SURFACE_SIDE_STYLE('',(#557220)); +#557220 = SURFACE_STYLE_FILL_AREA(#557221); +#557221 = FILL_AREA_STYLE('',(#557222)); +#557222 = FILL_AREA_STYLE_COLOUR('',#510798); +#557223 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #557224,#557231,#557238,#557245,#557252,#557259,#557266,#557273, + #557280,#557287,#557294,#557301,#557308,#557315,#557322,#557329, + #557336,#557343,#557350,#557357,#557364,#557371,#557378,#557385, + #557392,#557399,#557406,#557413),#33320); +#557224 = STYLED_ITEM('color',(#557225),#32468); +#557225 = PRESENTATION_STYLE_ASSIGNMENT((#557226)); +#557226 = SURFACE_STYLE_USAGE(.BOTH.,#557227); +#557227 = SURFACE_SIDE_STYLE('',(#557228)); +#557228 = SURFACE_STYLE_FILL_AREA(#557229); +#557229 = FILL_AREA_STYLE('',(#557230)); +#557230 = FILL_AREA_STYLE_COLOUR('',#512538); +#557231 = STYLED_ITEM('color',(#557232),#32544); +#557232 = PRESENTATION_STYLE_ASSIGNMENT((#557233)); +#557233 = SURFACE_STYLE_USAGE(.BOTH.,#557234); +#557234 = SURFACE_SIDE_STYLE('',(#557235)); +#557235 = SURFACE_STYLE_FILL_AREA(#557236); +#557236 = FILL_AREA_STYLE('',(#557237)); +#557237 = FILL_AREA_STYLE_COLOUR('',#512538); +#557238 = STYLED_ITEM('color',(#557239),#32575); +#557239 = PRESENTATION_STYLE_ASSIGNMENT((#557240)); +#557240 = SURFACE_STYLE_USAGE(.BOTH.,#557241); +#557241 = SURFACE_SIDE_STYLE('',(#557242)); +#557242 = SURFACE_STYLE_FILL_AREA(#557243); +#557243 = FILL_AREA_STYLE('',(#557244)); +#557244 = FILL_AREA_STYLE_COLOUR('',#512538); +#557245 = STYLED_ITEM('color',(#557246),#32600); +#557246 = PRESENTATION_STYLE_ASSIGNMENT((#557247)); +#557247 = SURFACE_STYLE_USAGE(.BOTH.,#557248); +#557248 = SURFACE_SIDE_STYLE('',(#557249)); +#557249 = SURFACE_STYLE_FILL_AREA(#557250); +#557250 = FILL_AREA_STYLE('',(#557251)); +#557251 = FILL_AREA_STYLE_COLOUR('',#512538); +#557252 = STYLED_ITEM('color',(#557253),#32625); +#557253 = PRESENTATION_STYLE_ASSIGNMENT((#557254)); +#557254 = SURFACE_STYLE_USAGE(.BOTH.,#557255); +#557255 = SURFACE_SIDE_STYLE('',(#557256)); +#557256 = SURFACE_STYLE_FILL_AREA(#557257); +#557257 = FILL_AREA_STYLE('',(#557258)); +#557258 = FILL_AREA_STYLE_COLOUR('',#512538); +#557259 = STYLED_ITEM('color',(#557260),#32649); +#557260 = PRESENTATION_STYLE_ASSIGNMENT((#557261)); +#557261 = SURFACE_STYLE_USAGE(.BOTH.,#557262); +#557262 = SURFACE_SIDE_STYLE('',(#557263)); +#557263 = SURFACE_STYLE_FILL_AREA(#557264); +#557264 = FILL_AREA_STYLE('',(#557265)); +#557265 = FILL_AREA_STYLE_COLOUR('',#512538); +#557266 = STYLED_ITEM('color',(#557267),#32673); +#557267 = PRESENTATION_STYLE_ASSIGNMENT((#557268)); +#557268 = SURFACE_STYLE_USAGE(.BOTH.,#557269); +#557269 = SURFACE_SIDE_STYLE('',(#557270)); +#557270 = SURFACE_STYLE_FILL_AREA(#557271); +#557271 = FILL_AREA_STYLE('',(#557272)); +#557272 = FILL_AREA_STYLE_COLOUR('',#512538); +#557273 = STYLED_ITEM('color',(#557274),#32698); +#557274 = PRESENTATION_STYLE_ASSIGNMENT((#557275)); +#557275 = SURFACE_STYLE_USAGE(.BOTH.,#557276); +#557276 = SURFACE_SIDE_STYLE('',(#557277)); +#557277 = SURFACE_STYLE_FILL_AREA(#557278); +#557278 = FILL_AREA_STYLE('',(#557279)); +#557279 = FILL_AREA_STYLE_COLOUR('',#512538); +#557280 = STYLED_ITEM('color',(#557281),#32723); +#557281 = PRESENTATION_STYLE_ASSIGNMENT((#557282)); +#557282 = SURFACE_STYLE_USAGE(.BOTH.,#557283); +#557283 = SURFACE_SIDE_STYLE('',(#557284)); +#557284 = SURFACE_STYLE_FILL_AREA(#557285); +#557285 = FILL_AREA_STYLE('',(#557286)); +#557286 = FILL_AREA_STYLE_COLOUR('',#512538); +#557287 = STYLED_ITEM('color',(#557288),#32740); +#557288 = PRESENTATION_STYLE_ASSIGNMENT((#557289)); +#557289 = SURFACE_STYLE_USAGE(.BOTH.,#557290); +#557290 = SURFACE_SIDE_STYLE('',(#557291)); +#557291 = SURFACE_STYLE_FILL_AREA(#557292); +#557292 = FILL_AREA_STYLE('',(#557293)); +#557293 = FILL_AREA_STYLE_COLOUR('',#512538); +#557294 = STYLED_ITEM('color',(#557295),#32826); +#557295 = PRESENTATION_STYLE_ASSIGNMENT((#557296)); +#557296 = SURFACE_STYLE_USAGE(.BOTH.,#557297); +#557297 = SURFACE_SIDE_STYLE('',(#557298)); +#557298 = SURFACE_STYLE_FILL_AREA(#557299); +#557299 = FILL_AREA_STYLE('',(#557300)); +#557300 = FILL_AREA_STYLE_COLOUR('',#520918); +#557301 = STYLED_ITEM('color',(#557302),#32858); +#557302 = PRESENTATION_STYLE_ASSIGNMENT((#557303)); +#557303 = SURFACE_STYLE_USAGE(.BOTH.,#557304); +#557304 = SURFACE_SIDE_STYLE('',(#557305)); +#557305 = SURFACE_STYLE_FILL_AREA(#557306); +#557306 = FILL_AREA_STYLE('',(#557307)); +#557307 = FILL_AREA_STYLE_COLOUR('',#520918); +#557308 = STYLED_ITEM('color',(#557309),#32882); +#557309 = PRESENTATION_STYLE_ASSIGNMENT((#557310)); +#557310 = SURFACE_STYLE_USAGE(.BOTH.,#557311); +#557311 = SURFACE_SIDE_STYLE('',(#557312)); +#557312 = SURFACE_STYLE_FILL_AREA(#557313); +#557313 = FILL_AREA_STYLE('',(#557314)); +#557314 = FILL_AREA_STYLE_COLOUR('',#520918); +#557315 = STYLED_ITEM('color',(#557316),#32907); +#557316 = PRESENTATION_STYLE_ASSIGNMENT((#557317)); +#557317 = SURFACE_STYLE_USAGE(.BOTH.,#557318); +#557318 = SURFACE_SIDE_STYLE('',(#557319)); +#557319 = SURFACE_STYLE_FILL_AREA(#557320); +#557320 = FILL_AREA_STYLE('',(#557321)); +#557321 = FILL_AREA_STYLE_COLOUR('',#520918); +#557322 = STYLED_ITEM('color',(#557323),#32931); +#557323 = PRESENTATION_STYLE_ASSIGNMENT((#557324)); +#557324 = SURFACE_STYLE_USAGE(.BOTH.,#557325); +#557325 = SURFACE_SIDE_STYLE('',(#557326)); +#557326 = SURFACE_STYLE_FILL_AREA(#557327); +#557327 = FILL_AREA_STYLE('',(#557328)); +#557328 = FILL_AREA_STYLE_COLOUR('',#520918); +#557329 = STYLED_ITEM('color',(#557330),#32956); +#557330 = PRESENTATION_STYLE_ASSIGNMENT((#557331)); +#557331 = SURFACE_STYLE_USAGE(.BOTH.,#557332); +#557332 = SURFACE_SIDE_STYLE('',(#557333)); +#557333 = SURFACE_STYLE_FILL_AREA(#557334); +#557334 = FILL_AREA_STYLE('',(#557335)); +#557335 = FILL_AREA_STYLE_COLOUR('',#520918); +#557336 = STYLED_ITEM('color',(#557337),#32980); +#557337 = PRESENTATION_STYLE_ASSIGNMENT((#557338)); +#557338 = SURFACE_STYLE_USAGE(.BOTH.,#557339); +#557339 = SURFACE_SIDE_STYLE('',(#557340)); +#557340 = SURFACE_STYLE_FILL_AREA(#557341); +#557341 = FILL_AREA_STYLE('',(#557342)); +#557342 = FILL_AREA_STYLE_COLOUR('',#520918); +#557343 = STYLED_ITEM('color',(#557344),#33005); +#557344 = PRESENTATION_STYLE_ASSIGNMENT((#557345)); +#557345 = SURFACE_STYLE_USAGE(.BOTH.,#557346); +#557346 = SURFACE_SIDE_STYLE('',(#557347)); +#557347 = SURFACE_STYLE_FILL_AREA(#557348); +#557348 = FILL_AREA_STYLE('',(#557349)); +#557349 = FILL_AREA_STYLE_COLOUR('',#520918); +#557350 = STYLED_ITEM('color',(#557351),#33022); +#557351 = PRESENTATION_STYLE_ASSIGNMENT((#557352)); +#557352 = SURFACE_STYLE_USAGE(.BOTH.,#557353); +#557353 = SURFACE_SIDE_STYLE('',(#557354)); +#557354 = SURFACE_STYLE_FILL_AREA(#557355); +#557355 = FILL_AREA_STYLE('',(#557356)); +#557356 = FILL_AREA_STYLE_COLOUR('',#512538); +#557357 = STYLED_ITEM('color',(#557358),#33108); +#557358 = PRESENTATION_STYLE_ASSIGNMENT((#557359)); +#557359 = SURFACE_STYLE_USAGE(.BOTH.,#557360); +#557360 = SURFACE_SIDE_STYLE('',(#557361)); +#557361 = SURFACE_STYLE_FILL_AREA(#557362); +#557362 = FILL_AREA_STYLE('',(#557363)); +#557363 = FILL_AREA_STYLE_COLOUR('',#512538); +#557364 = STYLED_ITEM('color',(#557365),#33139); +#557365 = PRESENTATION_STYLE_ASSIGNMENT((#557366)); +#557366 = SURFACE_STYLE_USAGE(.BOTH.,#557367); +#557367 = SURFACE_SIDE_STYLE('',(#557368)); +#557368 = SURFACE_STYLE_FILL_AREA(#557369); +#557369 = FILL_AREA_STYLE('',(#557370)); +#557370 = FILL_AREA_STYLE_COLOUR('',#512538); +#557371 = STYLED_ITEM('color',(#557372),#33164); +#557372 = PRESENTATION_STYLE_ASSIGNMENT((#557373)); +#557373 = SURFACE_STYLE_USAGE(.BOTH.,#557374); +#557374 = SURFACE_SIDE_STYLE('',(#557375)); +#557375 = SURFACE_STYLE_FILL_AREA(#557376); +#557376 = FILL_AREA_STYLE('',(#557377)); +#557377 = FILL_AREA_STYLE_COLOUR('',#512538); +#557378 = STYLED_ITEM('color',(#557379),#33189); +#557379 = PRESENTATION_STYLE_ASSIGNMENT((#557380)); +#557380 = SURFACE_STYLE_USAGE(.BOTH.,#557381); +#557381 = SURFACE_SIDE_STYLE('',(#557382)); +#557382 = SURFACE_STYLE_FILL_AREA(#557383); +#557383 = FILL_AREA_STYLE('',(#557384)); +#557384 = FILL_AREA_STYLE_COLOUR('',#512538); +#557385 = STYLED_ITEM('color',(#557386),#33213); +#557386 = PRESENTATION_STYLE_ASSIGNMENT((#557387)); +#557387 = SURFACE_STYLE_USAGE(.BOTH.,#557388); +#557388 = SURFACE_SIDE_STYLE('',(#557389)); +#557389 = SURFACE_STYLE_FILL_AREA(#557390); +#557390 = FILL_AREA_STYLE('',(#557391)); +#557391 = FILL_AREA_STYLE_COLOUR('',#512538); +#557392 = STYLED_ITEM('color',(#557393),#33237); +#557393 = PRESENTATION_STYLE_ASSIGNMENT((#557394)); +#557394 = SURFACE_STYLE_USAGE(.BOTH.,#557395); +#557395 = SURFACE_SIDE_STYLE('',(#557396)); +#557396 = SURFACE_STYLE_FILL_AREA(#557397); +#557397 = FILL_AREA_STYLE('',(#557398)); +#557398 = FILL_AREA_STYLE_COLOUR('',#512538); +#557399 = STYLED_ITEM('color',(#557400),#33262); +#557400 = PRESENTATION_STYLE_ASSIGNMENT((#557401)); +#557401 = SURFACE_STYLE_USAGE(.BOTH.,#557402); +#557402 = SURFACE_SIDE_STYLE('',(#557403)); +#557403 = SURFACE_STYLE_FILL_AREA(#557404); +#557404 = FILL_AREA_STYLE('',(#557405)); +#557405 = FILL_AREA_STYLE_COLOUR('',#512538); +#557406 = STYLED_ITEM('color',(#557407),#33287); +#557407 = PRESENTATION_STYLE_ASSIGNMENT((#557408)); +#557408 = SURFACE_STYLE_USAGE(.BOTH.,#557409); +#557409 = SURFACE_SIDE_STYLE('',(#557410)); +#557410 = SURFACE_STYLE_FILL_AREA(#557411); +#557411 = FILL_AREA_STYLE('',(#557412)); +#557412 = FILL_AREA_STYLE_COLOUR('',#512538); +#557413 = STYLED_ITEM('color',(#557414),#33304); +#557414 = PRESENTATION_STYLE_ASSIGNMENT((#557415)); +#557415 = SURFACE_STYLE_USAGE(.BOTH.,#557416); +#557416 = SURFACE_SIDE_STYLE('',(#557417)); +#557417 = SURFACE_STYLE_FILL_AREA(#557418); +#557418 = FILL_AREA_STYLE('',(#557419)); +#557419 = FILL_AREA_STYLE_COLOUR('',#512538); +#557420 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #557421,#557428,#557435,#557442,#557449,#557456,#557463,#557470, + #557477,#557484,#557491,#557498,#557505,#557512,#557520,#557527, + #557534,#557541,#557548,#557555,#557562,#557569,#557576,#557583, + #557590,#557597),#32424); +#557421 = STYLED_ITEM('color',(#557422),#31636); +#557422 = PRESENTATION_STYLE_ASSIGNMENT((#557423)); +#557423 = SURFACE_STYLE_USAGE(.BOTH.,#557424); +#557424 = SURFACE_SIDE_STYLE('',(#557425)); +#557425 = SURFACE_STYLE_FILL_AREA(#557426); +#557426 = FILL_AREA_STYLE('',(#557427)); +#557427 = FILL_AREA_STYLE_COLOUR('',#512538); +#557428 = STYLED_ITEM('color',(#557429),#31676); +#557429 = PRESENTATION_STYLE_ASSIGNMENT((#557430)); +#557430 = SURFACE_STYLE_USAGE(.BOTH.,#557431); +#557431 = SURFACE_SIDE_STYLE('',(#557432)); +#557432 = SURFACE_STYLE_FILL_AREA(#557433); +#557433 = FILL_AREA_STYLE('',(#557434)); +#557434 = FILL_AREA_STYLE_COLOUR('',#512538); +#557435 = STYLED_ITEM('color',(#557436),#31759); +#557436 = PRESENTATION_STYLE_ASSIGNMENT((#557437)); +#557437 = SURFACE_STYLE_USAGE(.BOTH.,#557438); +#557438 = SURFACE_SIDE_STYLE('',(#557439)); +#557439 = SURFACE_STYLE_FILL_AREA(#557440); +#557440 = FILL_AREA_STYLE('',(#557441)); +#557441 = FILL_AREA_STYLE_COLOUR('',#512538); +#557442 = STYLED_ITEM('color',(#557443),#31784); +#557443 = PRESENTATION_STYLE_ASSIGNMENT((#557444)); +#557444 = SURFACE_STYLE_USAGE(.BOTH.,#557445); +#557445 = SURFACE_SIDE_STYLE('',(#557446)); +#557446 = SURFACE_STYLE_FILL_AREA(#557447); +#557447 = FILL_AREA_STYLE('',(#557448)); +#557448 = FILL_AREA_STYLE_COLOUR('',#512538); +#557449 = STYLED_ITEM('color',(#557450),#31809); +#557450 = PRESENTATION_STYLE_ASSIGNMENT((#557451)); +#557451 = SURFACE_STYLE_USAGE(.BOTH.,#557452); +#557452 = SURFACE_SIDE_STYLE('',(#557453)); +#557453 = SURFACE_STYLE_FILL_AREA(#557454); +#557454 = FILL_AREA_STYLE('',(#557455)); +#557455 = FILL_AREA_STYLE_COLOUR('',#512538); +#557456 = STYLED_ITEM('color',(#557457),#31876); +#557457 = PRESENTATION_STYLE_ASSIGNMENT((#557458)); +#557458 = SURFACE_STYLE_USAGE(.BOTH.,#557459); +#557459 = SURFACE_SIDE_STYLE('',(#557460)); +#557460 = SURFACE_STYLE_FILL_AREA(#557461); +#557461 = FILL_AREA_STYLE('',(#557462)); +#557462 = FILL_AREA_STYLE_COLOUR('',#512538); +#557463 = STYLED_ITEM('color',(#557464),#31893); +#557464 = PRESENTATION_STYLE_ASSIGNMENT((#557465)); +#557465 = SURFACE_STYLE_USAGE(.BOTH.,#557466); +#557466 = SURFACE_SIDE_STYLE('',(#557467)); +#557467 = SURFACE_STYLE_FILL_AREA(#557468); +#557468 = FILL_AREA_STYLE('',(#557469)); +#557469 = FILL_AREA_STYLE_COLOUR('',#512538); +#557470 = STYLED_ITEM('color',(#557471),#31910); +#557471 = PRESENTATION_STYLE_ASSIGNMENT((#557472)); +#557472 = SURFACE_STYLE_USAGE(.BOTH.,#557473); +#557473 = SURFACE_SIDE_STYLE('',(#557474)); +#557474 = SURFACE_STYLE_FILL_AREA(#557475); +#557475 = FILL_AREA_STYLE('',(#557476)); +#557476 = FILL_AREA_STYLE_COLOUR('',#513578); +#557477 = STYLED_ITEM('color',(#557478),#31959); +#557478 = PRESENTATION_STYLE_ASSIGNMENT((#557479)); +#557479 = SURFACE_STYLE_USAGE(.BOTH.,#557480); +#557480 = SURFACE_SIDE_STYLE('',(#557481)); +#557481 = SURFACE_STYLE_FILL_AREA(#557482); +#557482 = FILL_AREA_STYLE('',(#557483)); +#557483 = FILL_AREA_STYLE_COLOUR('',#512538); +#557484 = STYLED_ITEM('color',(#557485),#31976); +#557485 = PRESENTATION_STYLE_ASSIGNMENT((#557486)); +#557486 = SURFACE_STYLE_USAGE(.BOTH.,#557487); +#557487 = SURFACE_SIDE_STYLE('',(#557488)); +#557488 = SURFACE_STYLE_FILL_AREA(#557489); +#557489 = FILL_AREA_STYLE('',(#557490)); +#557490 = FILL_AREA_STYLE_COLOUR('',#512538); +#557491 = STYLED_ITEM('color',(#557492),#31993); +#557492 = PRESENTATION_STYLE_ASSIGNMENT((#557493)); +#557493 = SURFACE_STYLE_USAGE(.BOTH.,#557494); +#557494 = SURFACE_SIDE_STYLE('',(#557495)); +#557495 = SURFACE_STYLE_FILL_AREA(#557496); +#557496 = FILL_AREA_STYLE('',(#557497)); +#557497 = FILL_AREA_STYLE_COLOUR('',#513578); +#557498 = STYLED_ITEM('color',(#557499),#32042); +#557499 = PRESENTATION_STYLE_ASSIGNMENT((#557500)); +#557500 = SURFACE_STYLE_USAGE(.BOTH.,#557501); +#557501 = SURFACE_SIDE_STYLE('',(#557502)); +#557502 = SURFACE_STYLE_FILL_AREA(#557503); +#557503 = FILL_AREA_STYLE('',(#557504)); +#557504 = FILL_AREA_STYLE_COLOUR('',#513578); +#557505 = STYLED_ITEM('color',(#557506),#32059); +#557506 = PRESENTATION_STYLE_ASSIGNMENT((#557507)); +#557507 = SURFACE_STYLE_USAGE(.BOTH.,#557508); +#557508 = SURFACE_SIDE_STYLE('',(#557509)); +#557509 = SURFACE_STYLE_FILL_AREA(#557510); +#557510 = FILL_AREA_STYLE('',(#557511)); +#557511 = FILL_AREA_STYLE_COLOUR('',#512538); +#557512 = STYLED_ITEM('color',(#557513),#32128); +#557513 = PRESENTATION_STYLE_ASSIGNMENT((#557514)); +#557514 = SURFACE_STYLE_USAGE(.BOTH.,#557515); +#557515 = SURFACE_SIDE_STYLE('',(#557516)); +#557516 = SURFACE_STYLE_FILL_AREA(#557517); +#557517 = FILL_AREA_STYLE('',(#557518)); +#557518 = FILL_AREA_STYLE_COLOUR('',#557519); +#557519 = COLOUR_RGB('',8.200000279077E-02,8.600000121357E-02, + 9.399999706163E-02); +#557520 = STYLED_ITEM('color',(#557521),#32159); +#557521 = PRESENTATION_STYLE_ASSIGNMENT((#557522)); +#557522 = SURFACE_STYLE_USAGE(.BOTH.,#557523); +#557523 = SURFACE_SIDE_STYLE('',(#557524)); +#557524 = SURFACE_STYLE_FILL_AREA(#557525); +#557525 = FILL_AREA_STYLE('',(#557526)); +#557526 = FILL_AREA_STYLE_COLOUR('',#557519); +#557527 = STYLED_ITEM('color',(#557528),#32183); +#557528 = PRESENTATION_STYLE_ASSIGNMENT((#557529)); +#557529 = SURFACE_STYLE_USAGE(.BOTH.,#557530); +#557530 = SURFACE_SIDE_STYLE('',(#557531)); +#557531 = SURFACE_STYLE_FILL_AREA(#557532); +#557532 = FILL_AREA_STYLE('',(#557533)); +#557533 = FILL_AREA_STYLE_COLOUR('',#512538); +#557534 = STYLED_ITEM('color',(#557535),#32252); +#557535 = PRESENTATION_STYLE_ASSIGNMENT((#557536)); +#557536 = SURFACE_STYLE_USAGE(.BOTH.,#557537); +#557537 = SURFACE_SIDE_STYLE('',(#557538)); +#557538 = SURFACE_STYLE_FILL_AREA(#557539); +#557539 = FILL_AREA_STYLE('',(#557540)); +#557540 = FILL_AREA_STYLE_COLOUR('',#557519); +#557541 = STYLED_ITEM('color',(#557542),#32276); +#557542 = PRESENTATION_STYLE_ASSIGNMENT((#557543)); +#557543 = SURFACE_STYLE_USAGE(.BOTH.,#557544); +#557544 = SURFACE_SIDE_STYLE('',(#557545)); +#557545 = SURFACE_STYLE_FILL_AREA(#557546); +#557546 = FILL_AREA_STYLE('',(#557547)); +#557547 = FILL_AREA_STYLE_COLOUR('',#512538); +#557548 = STYLED_ITEM('color',(#557549),#32293); +#557549 = PRESENTATION_STYLE_ASSIGNMENT((#557550)); +#557550 = SURFACE_STYLE_USAGE(.BOTH.,#557551); +#557551 = SURFACE_SIDE_STYLE('',(#557552)); +#557552 = SURFACE_STYLE_FILL_AREA(#557553); +#557553 = FILL_AREA_STYLE('',(#557554)); +#557554 = FILL_AREA_STYLE_COLOUR('',#512538); +#557555 = STYLED_ITEM('color',(#557556),#32310); +#557556 = PRESENTATION_STYLE_ASSIGNMENT((#557557)); +#557557 = SURFACE_STYLE_USAGE(.BOTH.,#557558); +#557558 = SURFACE_SIDE_STYLE('',(#557559)); +#557559 = SURFACE_STYLE_FILL_AREA(#557560); +#557560 = FILL_AREA_STYLE('',(#557561)); +#557561 = FILL_AREA_STYLE_COLOUR('',#512538); +#557562 = STYLED_ITEM('color',(#557563),#32327); +#557563 = PRESENTATION_STYLE_ASSIGNMENT((#557564)); +#557564 = SURFACE_STYLE_USAGE(.BOTH.,#557565); +#557565 = SURFACE_SIDE_STYLE('',(#557566)); +#557566 = SURFACE_STYLE_FILL_AREA(#557567); +#557567 = FILL_AREA_STYLE('',(#557568)); +#557568 = FILL_AREA_STYLE_COLOUR('',#512538); +#557569 = STYLED_ITEM('color',(#557570),#32344); +#557570 = PRESENTATION_STYLE_ASSIGNMENT((#557571)); +#557571 = SURFACE_STYLE_USAGE(.BOTH.,#557572); +#557572 = SURFACE_SIDE_STYLE('',(#557573)); +#557573 = SURFACE_STYLE_FILL_AREA(#557574); +#557574 = FILL_AREA_STYLE('',(#557575)); +#557575 = FILL_AREA_STYLE_COLOUR('',#512538); +#557576 = STYLED_ITEM('color',(#557577),#32361); +#557577 = PRESENTATION_STYLE_ASSIGNMENT((#557578)); +#557578 = SURFACE_STYLE_USAGE(.BOTH.,#557579); +#557579 = SURFACE_SIDE_STYLE('',(#557580)); +#557580 = SURFACE_STYLE_FILL_AREA(#557581); +#557581 = FILL_AREA_STYLE('',(#557582)); +#557582 = FILL_AREA_STYLE_COLOUR('',#512538); +#557583 = STYLED_ITEM('color',(#557584),#32378); +#557584 = PRESENTATION_STYLE_ASSIGNMENT((#557585)); +#557585 = SURFACE_STYLE_USAGE(.BOTH.,#557586); +#557586 = SURFACE_SIDE_STYLE('',(#557587)); +#557587 = SURFACE_STYLE_FILL_AREA(#557588); +#557588 = FILL_AREA_STYLE('',(#557589)); +#557589 = FILL_AREA_STYLE_COLOUR('',#512538); +#557590 = STYLED_ITEM('color',(#557591),#32395); +#557591 = PRESENTATION_STYLE_ASSIGNMENT((#557592)); +#557592 = SURFACE_STYLE_USAGE(.BOTH.,#557593); +#557593 = SURFACE_SIDE_STYLE('',(#557594)); +#557594 = SURFACE_STYLE_FILL_AREA(#557595); +#557595 = FILL_AREA_STYLE('',(#557596)); +#557596 = FILL_AREA_STYLE_COLOUR('',#557519); +#557597 = STYLED_ITEM('color',(#557598),#32412); +#557598 = PRESENTATION_STYLE_ASSIGNMENT((#557599)); +#557599 = SURFACE_STYLE_USAGE(.BOTH.,#557600); +#557600 = SURFACE_SIDE_STYLE('',(#557601)); +#557601 = SURFACE_STYLE_FILL_AREA(#557602); +#557602 = FILL_AREA_STYLE('',(#557603)); +#557603 = FILL_AREA_STYLE_COLOUR('',#557519); +#557604 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #557605),#503653); +#557605 = STYLED_ITEM('color',(#557606),#495329); +#557606 = PRESENTATION_STYLE_ASSIGNMENT((#557607)); +#557607 = SURFACE_STYLE_USAGE(.BOTH.,#557608); +#557608 = SURFACE_SIDE_STYLE('',(#557609,#557612)); +#557609 = SURFACE_STYLE_FILL_AREA(#557610); +#557610 = FILL_AREA_STYLE('',(#557611)); +#557611 = FILL_AREA_STYLE_COLOUR('',#543998); +#557612 = SURFACE_STYLE_RENDERING_WITH_PROPERTIES(.NORMAL_SHADING., + #543998,(#557613)); +#557613 = SURFACE_STYLE_TRANSPARENT(0.170000016689); +ENDSEC; +END-ISO-10303-21; diff --git a/shell/export/_export_log.txt b/shell/v1.1/export/_export_log.txt similarity index 100% rename from shell/export/_export_log.txt rename to shell/v1.1/export/_export_log.txt diff --git a/shell/export/print/README.md b/shell/v1.1/export/print/README.md similarity index 100% rename from shell/export/print/README.md rename to shell/v1.1/export/print/README.md diff --git a/shell/export/print/step/BatteryPanel.step b/shell/v1.1/export/print/step/BatteryPanel.step similarity index 100% rename from shell/export/print/step/BatteryPanel.step rename to shell/v1.1/export/print/step/BatteryPanel.step diff --git a/shell/export/print/step/BottomShell.step b/shell/v1.1/export/print/step/BottomShell.step similarity index 100% rename from shell/export/print/step/BottomShell.step rename to shell/v1.1/export/print/step/BottomShell.step diff --git a/shell/export/print/step/BumperCap.step b/shell/v1.1/export/print/step/BumperCap.step similarity index 100% rename from shell/export/print/step/BumperCap.step rename to shell/v1.1/export/print/step/BumperCap.step diff --git a/shell/export/print/step/FaceCap1.step b/shell/v1.1/export/print/step/FaceCap1.step similarity index 100% rename from shell/export/print/step/FaceCap1.step rename to shell/v1.1/export/print/step/FaceCap1.step diff --git a/shell/export/print/step/FaceCap2.step b/shell/v1.1/export/print/step/FaceCap2.step similarity index 100% rename from shell/export/print/step/FaceCap2.step rename to shell/v1.1/export/print/step/FaceCap2.step diff --git a/shell/export/print/step/FaceCap3.step b/shell/v1.1/export/print/step/FaceCap3.step similarity index 100% rename from shell/export/print/step/FaceCap3.step rename to shell/v1.1/export/print/step/FaceCap3.step diff --git a/shell/export/print/step/FaceCap4.step b/shell/v1.1/export/print/step/FaceCap4.step similarity index 100% rename from shell/export/print/step/FaceCap4.step rename to shell/v1.1/export/print/step/FaceCap4.step diff --git a/shell/export/print/step/FaceCap5.step b/shell/v1.1/export/print/step/FaceCap5.step similarity index 100% rename from shell/export/print/step/FaceCap5.step rename to shell/v1.1/export/print/step/FaceCap5.step diff --git a/shell/export/print/step/FaceCap6.step b/shell/v1.1/export/print/step/FaceCap6.step similarity index 100% rename from shell/export/print/step/FaceCap6.step rename to shell/v1.1/export/print/step/FaceCap6.step diff --git a/shell/export/print/step/HallBridge.step b/shell/v1.1/export/print/step/HallBridge.step similarity index 100% rename from shell/export/print/step/HallBridge.step rename to shell/v1.1/export/print/step/HallBridge.step diff --git a/shell/export/print/step/PowerPlate.step b/shell/v1.1/export/print/step/PowerPlate.step similarity index 100% rename from shell/export/print/step/PowerPlate.step rename to shell/v1.1/export/print/step/PowerPlate.step diff --git a/shell/export/print/step/SidePlateL1.step b/shell/v1.1/export/print/step/SidePlateL1.step similarity index 100% rename from shell/export/print/step/SidePlateL1.step rename to shell/v1.1/export/print/step/SidePlateL1.step diff --git a/shell/export/print/step/SidePlateL2.step b/shell/v1.1/export/print/step/SidePlateL2.step similarity index 100% rename from shell/export/print/step/SidePlateL2.step rename to shell/v1.1/export/print/step/SidePlateL2.step diff --git a/shell/export/print/step/SidePlateR1.step b/shell/v1.1/export/print/step/SidePlateR1.step similarity index 100% rename from shell/export/print/step/SidePlateR1.step rename to shell/v1.1/export/print/step/SidePlateR1.step diff --git a/shell/export/print/step/SidePlateR2.step b/shell/v1.1/export/print/step/SidePlateR2.step similarity index 100% rename from shell/export/print/step/SidePlateR2.step rename to shell/v1.1/export/print/step/SidePlateR2.step diff --git a/shell/export/print/step/TopShell.step b/shell/v1.1/export/print/step/TopShell.step similarity index 100% rename from shell/export/print/step/TopShell.step rename to shell/v1.1/export/print/step/TopShell.step diff --git a/shell/export/print/step/Trigger.step b/shell/v1.1/export/print/step/Trigger.step similarity index 100% rename from shell/export/print/step/Trigger.step rename to shell/v1.1/export/print/step/Trigger.step diff --git a/shell/export/print/step/TriggerPost.step b/shell/v1.1/export/print/step/TriggerPost.step similarity index 100% rename from shell/export/print/step/TriggerPost.step rename to shell/v1.1/export/print/step/TriggerPost.step diff --git a/shell/export/print/stl/BatteryPanel.stl b/shell/v1.1/export/print/stl/BatteryPanel.stl similarity index 100% rename from shell/export/print/stl/BatteryPanel.stl rename to shell/v1.1/export/print/stl/BatteryPanel.stl diff --git a/shell/export/print/stl/BottomShell.stl b/shell/v1.1/export/print/stl/BottomShell.stl similarity index 100% rename from shell/export/print/stl/BottomShell.stl rename to shell/v1.1/export/print/stl/BottomShell.stl diff --git a/shell/export/print/stl/BottomShell_with_buck.stl b/shell/v1.1/export/print/stl/BottomShell_with_buck.stl similarity index 100% rename from shell/export/print/stl/BottomShell_with_buck.stl rename to shell/v1.1/export/print/stl/BottomShell_with_buck.stl diff --git a/shell/export/print/stl/BumperCap.stl b/shell/v1.1/export/print/stl/BumperCap.stl similarity index 100% rename from shell/export/print/stl/BumperCap.stl rename to shell/v1.1/export/print/stl/BumperCap.stl diff --git a/shell/export/print/stl/FaceCap1.stl b/shell/v1.1/export/print/stl/FaceCap1.stl similarity index 100% rename from shell/export/print/stl/FaceCap1.stl rename to shell/v1.1/export/print/stl/FaceCap1.stl diff --git a/shell/export/print/stl/FaceCap2.stl b/shell/v1.1/export/print/stl/FaceCap2.stl similarity index 100% rename from shell/export/print/stl/FaceCap2.stl rename to shell/v1.1/export/print/stl/FaceCap2.stl diff --git a/shell/export/print/stl/FaceCap3.stl b/shell/v1.1/export/print/stl/FaceCap3.stl similarity index 100% rename from shell/export/print/stl/FaceCap3.stl rename to shell/v1.1/export/print/stl/FaceCap3.stl diff --git a/shell/export/print/stl/FaceCap4.stl b/shell/v1.1/export/print/stl/FaceCap4.stl similarity index 100% rename from shell/export/print/stl/FaceCap4.stl rename to shell/v1.1/export/print/stl/FaceCap4.stl diff --git a/shell/export/print/stl/FaceCap5.stl b/shell/v1.1/export/print/stl/FaceCap5.stl similarity index 100% rename from shell/export/print/stl/FaceCap5.stl rename to shell/v1.1/export/print/stl/FaceCap5.stl diff --git a/shell/export/print/stl/FaceCap6.stl b/shell/v1.1/export/print/stl/FaceCap6.stl similarity index 100% rename from shell/export/print/stl/FaceCap6.stl rename to shell/v1.1/export/print/stl/FaceCap6.stl diff --git a/shell/export/print/stl/HallBridge.stl b/shell/v1.1/export/print/stl/HallBridge.stl similarity index 100% rename from shell/export/print/stl/HallBridge.stl rename to shell/v1.1/export/print/stl/HallBridge.stl diff --git a/shell/export/print/stl/PowerPlate.stl b/shell/v1.1/export/print/stl/PowerPlate.stl similarity index 100% rename from shell/export/print/stl/PowerPlate.stl rename to shell/v1.1/export/print/stl/PowerPlate.stl diff --git a/shell/export/print/stl/SidePlateL1.stl b/shell/v1.1/export/print/stl/SidePlateL1.stl similarity index 100% rename from shell/export/print/stl/SidePlateL1.stl rename to shell/v1.1/export/print/stl/SidePlateL1.stl diff --git a/shell/export/print/stl/SidePlateL2.stl b/shell/v1.1/export/print/stl/SidePlateL2.stl similarity index 100% rename from shell/export/print/stl/SidePlateL2.stl rename to shell/v1.1/export/print/stl/SidePlateL2.stl diff --git a/shell/export/print/stl/SidePlateR1.stl b/shell/v1.1/export/print/stl/SidePlateR1.stl similarity index 100% rename from shell/export/print/stl/SidePlateR1.stl rename to shell/v1.1/export/print/stl/SidePlateR1.stl diff --git a/shell/export/print/stl/SidePlateR2.stl b/shell/v1.1/export/print/stl/SidePlateR2.stl similarity index 100% rename from shell/export/print/stl/SidePlateR2.stl rename to shell/v1.1/export/print/stl/SidePlateR2.stl diff --git a/shell/export/print/stl/TopShell.stl b/shell/v1.1/export/print/stl/TopShell.stl similarity index 100% rename from shell/export/print/stl/TopShell.stl rename to shell/v1.1/export/print/stl/TopShell.stl diff --git a/shell/export/print/stl/TopShell_with_buck.stl b/shell/v1.1/export/print/stl/TopShell_with_buck.stl similarity index 100% rename from shell/export/print/stl/TopShell_with_buck.stl rename to shell/v1.1/export/print/stl/TopShell_with_buck.stl diff --git a/shell/export/print/stl/Trigger.stl b/shell/v1.1/export/print/stl/Trigger.stl similarity index 100% rename from shell/export/print/stl/Trigger.stl rename to shell/v1.1/export/print/stl/Trigger.stl diff --git a/shell/export/print/stl/TriggerPost.stl b/shell/v1.1/export/print/stl/TriggerPost.stl similarity index 100% rename from shell/export/print/stl/TriggerPost.stl rename to shell/v1.1/export/print/stl/TriggerPost.stl diff --git a/shell/export/print/tools/build_sup.py b/shell/v1.1/export/print/tools/build_sup.py similarity index 100% rename from shell/export/print/tools/build_sup.py rename to shell/v1.1/export/print/tools/build_sup.py diff --git a/shell/export/print/tools/export_print.py b/shell/v1.1/export/print/tools/export_print.py similarity index 100% rename from shell/export/print/tools/export_print.py rename to shell/v1.1/export/print/tools/export_print.py diff --git a/shell/export/print/tools/export_print_cfg.py b/shell/v1.1/export/print/tools/export_print_cfg.py similarity index 100% rename from shell/export/print/tools/export_print_cfg.py rename to shell/v1.1/export/print/tools/export_print_cfg.py diff --git a/shell/export/print/tools/gen_buck.py b/shell/v1.1/export/print/tools/gen_buck.py similarity index 100% rename from shell/export/print/tools/gen_buck.py rename to shell/v1.1/export/print/tools/gen_buck.py diff --git a/shell/export/print/tools/gen_supports.py b/shell/v1.1/export/print/tools/gen_supports.py similarity index 100% rename from shell/export/print/tools/gen_supports.py rename to shell/v1.1/export/print/tools/gen_supports.py diff --git a/shell/export/print/tools/orient.py b/shell/v1.1/export/print/tools/orient.py similarity index 100% rename from shell/export/print/tools/orient.py rename to shell/v1.1/export/print/tools/orient.py diff --git a/shell/export/print/tools/step_orient.py b/shell/v1.1/export/print/tools/step_orient.py similarity index 100% rename from shell/export/print/tools/step_orient.py rename to shell/v1.1/export/print/tools/step_orient.py diff --git a/shell/export/reference/step/ContactClip_Revolve.step b/shell/v1.1/export/reference/step/ContactClip_Revolve.step similarity index 100% rename from shell/export/reference/step/ContactClip_Revolve.step rename to shell/v1.1/export/reference/step/ContactClip_Revolve.step diff --git a/shell/export/reference/step/Contacts_Block.step b/shell/v1.1/export/reference/step/Contacts_Block.step similarity index 100% rename from shell/export/reference/step/Contacts_Block.step rename to shell/v1.1/export/reference/step/Contacts_Block.step diff --git a/shell/export/reference/step/PCB_Reference.step b/shell/v1.1/export/reference/step/PCB_Reference.step similarity index 100% rename from shell/export/reference/step/PCB_Reference.step rename to shell/v1.1/export/reference/step/PCB_Reference.step diff --git a/shell/export/reference/step/SpringRef.step b/shell/v1.1/export/reference/step/SpringRef.step similarity index 100% rename from shell/export/reference/step/SpringRef.step rename to shell/v1.1/export/reference/step/SpringRef.step diff --git a/shell/export/reference/step/ThumbstickKnob_Ref.step b/shell/v1.1/export/reference/step/ThumbstickKnob_Ref.step similarity index 100% rename from shell/export/reference/step/ThumbstickKnob_Ref.step rename to shell/v1.1/export/reference/step/ThumbstickKnob_Ref.step diff --git a/shell/export/reference/stl/ContactClip_Revolve.stl b/shell/v1.1/export/reference/stl/ContactClip_Revolve.stl similarity index 100% rename from shell/export/reference/stl/ContactClip_Revolve.stl rename to shell/v1.1/export/reference/stl/ContactClip_Revolve.stl diff --git a/shell/export/reference/stl/Contacts_Block.stl b/shell/v1.1/export/reference/stl/Contacts_Block.stl similarity index 100% rename from shell/export/reference/stl/Contacts_Block.stl rename to shell/v1.1/export/reference/stl/Contacts_Block.stl diff --git a/shell/export/reference/stl/PCB_Reference.stl b/shell/v1.1/export/reference/stl/PCB_Reference.stl similarity index 100% rename from shell/export/reference/stl/PCB_Reference.stl rename to shell/v1.1/export/reference/stl/PCB_Reference.stl diff --git a/shell/export/reference/stl/SpringRef.stl b/shell/v1.1/export/reference/stl/SpringRef.stl similarity index 100% rename from shell/export/reference/stl/SpringRef.stl rename to shell/v1.1/export/reference/stl/SpringRef.stl diff --git a/shell/export/reference/stl/ThumbstickKnob_Ref.stl b/shell/v1.1/export/reference/stl/ThumbstickKnob_Ref.stl similarity index 100% rename from shell/export/reference/stl/ThumbstickKnob_Ref.stl rename to shell/v1.1/export/reference/stl/ThumbstickKnob_Ref.stl diff --git a/shell/export/step/BatteryPanel.step b/shell/v1.1/export/step/BatteryPanel.step similarity index 100% rename from shell/export/step/BatteryPanel.step rename to shell/v1.1/export/step/BatteryPanel.step diff --git a/shell/export/step/BottomShell.step b/shell/v1.1/export/step/BottomShell.step similarity index 100% rename from shell/export/step/BottomShell.step rename to shell/v1.1/export/step/BottomShell.step diff --git a/shell/export/step/BumperCap.step b/shell/v1.1/export/step/BumperCap.step similarity index 100% rename from shell/export/step/BumperCap.step rename to shell/v1.1/export/step/BumperCap.step diff --git a/shell/export/step/FaceCap1.step b/shell/v1.1/export/step/FaceCap1.step similarity index 100% rename from shell/export/step/FaceCap1.step rename to shell/v1.1/export/step/FaceCap1.step diff --git a/shell/export/step/FaceCap2.step b/shell/v1.1/export/step/FaceCap2.step similarity index 100% rename from shell/export/step/FaceCap2.step rename to shell/v1.1/export/step/FaceCap2.step diff --git a/shell/export/step/FaceCap3.step b/shell/v1.1/export/step/FaceCap3.step similarity index 100% rename from shell/export/step/FaceCap3.step rename to shell/v1.1/export/step/FaceCap3.step diff --git a/shell/export/step/FaceCap4.step b/shell/v1.1/export/step/FaceCap4.step similarity index 100% rename from shell/export/step/FaceCap4.step rename to shell/v1.1/export/step/FaceCap4.step diff --git a/shell/export/step/FaceCap5.step b/shell/v1.1/export/step/FaceCap5.step similarity index 100% rename from shell/export/step/FaceCap5.step rename to shell/v1.1/export/step/FaceCap5.step diff --git a/shell/export/step/FaceCap6.step b/shell/v1.1/export/step/FaceCap6.step similarity index 100% rename from shell/export/step/FaceCap6.step rename to shell/v1.1/export/step/FaceCap6.step diff --git a/shell/export/step/HallBridge.step b/shell/v1.1/export/step/HallBridge.step similarity index 100% rename from shell/export/step/HallBridge.step rename to shell/v1.1/export/step/HallBridge.step diff --git a/shell/export/step/PowerPlate.step b/shell/v1.1/export/step/PowerPlate.step similarity index 100% rename from shell/export/step/PowerPlate.step rename to shell/v1.1/export/step/PowerPlate.step diff --git a/shell/export/step/SidePlateL1.step b/shell/v1.1/export/step/SidePlateL1.step similarity index 100% rename from shell/export/step/SidePlateL1.step rename to shell/v1.1/export/step/SidePlateL1.step diff --git a/shell/export/step/SidePlateL2.step b/shell/v1.1/export/step/SidePlateL2.step similarity index 100% rename from shell/export/step/SidePlateL2.step rename to shell/v1.1/export/step/SidePlateL2.step diff --git a/shell/export/step/SidePlateR1.step b/shell/v1.1/export/step/SidePlateR1.step similarity index 100% rename from shell/export/step/SidePlateR1.step rename to shell/v1.1/export/step/SidePlateR1.step diff --git a/shell/export/step/SidePlateR2.step b/shell/v1.1/export/step/SidePlateR2.step similarity index 100% rename from shell/export/step/SidePlateR2.step rename to shell/v1.1/export/step/SidePlateR2.step diff --git a/shell/export/step/TopShell.step b/shell/v1.1/export/step/TopShell.step similarity index 100% rename from shell/export/step/TopShell.step rename to shell/v1.1/export/step/TopShell.step diff --git a/shell/export/step/TopShell_with_cavity.step b/shell/v1.1/export/step/TopShell_with_cavity.step similarity index 100% rename from shell/export/step/TopShell_with_cavity.step rename to shell/v1.1/export/step/TopShell_with_cavity.step diff --git a/shell/export/step/Trigger.step b/shell/v1.1/export/step/Trigger.step similarity index 100% rename from shell/export/step/Trigger.step rename to shell/v1.1/export/step/Trigger.step diff --git a/shell/export/step/TriggerPost.step b/shell/v1.1/export/step/TriggerPost.step similarity index 100% rename from shell/export/step/TriggerPost.step rename to shell/v1.1/export/step/TriggerPost.step diff --git a/shell/export/stl/BatteryPanel.stl b/shell/v1.1/export/stl/BatteryPanel.stl similarity index 100% rename from shell/export/stl/BatteryPanel.stl rename to shell/v1.1/export/stl/BatteryPanel.stl diff --git a/shell/export/stl/BottomShell.stl b/shell/v1.1/export/stl/BottomShell.stl similarity index 100% rename from shell/export/stl/BottomShell.stl rename to shell/v1.1/export/stl/BottomShell.stl diff --git a/shell/export/stl/BumperCap.stl b/shell/v1.1/export/stl/BumperCap.stl similarity index 100% rename from shell/export/stl/BumperCap.stl rename to shell/v1.1/export/stl/BumperCap.stl diff --git a/shell/export/stl/FaceCap1.stl b/shell/v1.1/export/stl/FaceCap1.stl similarity index 100% rename from shell/export/stl/FaceCap1.stl rename to shell/v1.1/export/stl/FaceCap1.stl diff --git a/shell/export/stl/FaceCap2.stl b/shell/v1.1/export/stl/FaceCap2.stl similarity index 100% rename from shell/export/stl/FaceCap2.stl rename to shell/v1.1/export/stl/FaceCap2.stl diff --git a/shell/export/stl/FaceCap3.stl b/shell/v1.1/export/stl/FaceCap3.stl similarity index 100% rename from shell/export/stl/FaceCap3.stl rename to shell/v1.1/export/stl/FaceCap3.stl diff --git a/shell/export/stl/FaceCap4.stl b/shell/v1.1/export/stl/FaceCap4.stl similarity index 100% rename from shell/export/stl/FaceCap4.stl rename to shell/v1.1/export/stl/FaceCap4.stl diff --git a/shell/export/stl/FaceCap5.stl b/shell/v1.1/export/stl/FaceCap5.stl similarity index 100% rename from shell/export/stl/FaceCap5.stl rename to shell/v1.1/export/stl/FaceCap5.stl diff --git a/shell/export/stl/FaceCap6.stl b/shell/v1.1/export/stl/FaceCap6.stl similarity index 100% rename from shell/export/stl/FaceCap6.stl rename to shell/v1.1/export/stl/FaceCap6.stl diff --git a/shell/export/stl/HallBridge.stl b/shell/v1.1/export/stl/HallBridge.stl similarity index 100% rename from shell/export/stl/HallBridge.stl rename to shell/v1.1/export/stl/HallBridge.stl diff --git a/shell/export/stl/PowerPlate.stl b/shell/v1.1/export/stl/PowerPlate.stl similarity index 100% rename from shell/export/stl/PowerPlate.stl rename to shell/v1.1/export/stl/PowerPlate.stl diff --git a/shell/export/stl/SidePlateL1.stl b/shell/v1.1/export/stl/SidePlateL1.stl similarity index 100% rename from shell/export/stl/SidePlateL1.stl rename to shell/v1.1/export/stl/SidePlateL1.stl diff --git a/shell/export/stl/SidePlateL2.stl b/shell/v1.1/export/stl/SidePlateL2.stl similarity index 100% rename from shell/export/stl/SidePlateL2.stl rename to shell/v1.1/export/stl/SidePlateL2.stl diff --git a/shell/export/stl/SidePlateR1.stl b/shell/v1.1/export/stl/SidePlateR1.stl similarity index 100% rename from shell/export/stl/SidePlateR1.stl rename to shell/v1.1/export/stl/SidePlateR1.stl diff --git a/shell/export/stl/SidePlateR2.stl b/shell/v1.1/export/stl/SidePlateR2.stl similarity index 100% rename from shell/export/stl/SidePlateR2.stl rename to shell/v1.1/export/stl/SidePlateR2.stl diff --git a/shell/export/stl/TopShell.stl b/shell/v1.1/export/stl/TopShell.stl similarity index 100% rename from shell/export/stl/TopShell.stl rename to shell/v1.1/export/stl/TopShell.stl diff --git a/shell/export/stl/Trigger.stl b/shell/v1.1/export/stl/Trigger.stl similarity index 100% rename from shell/export/stl/Trigger.stl rename to shell/v1.1/export/stl/Trigger.stl diff --git a/shell/export/stl/TriggerPost.stl b/shell/v1.1/export/stl/TriggerPost.stl similarity index 100% rename from shell/export/stl/TriggerPost.stl rename to shell/v1.1/export/stl/TriggerPost.stl diff --git a/shell/fusion/SnipsShell.f3d b/shell/v1.1/fusion/SnipsShell.f3d similarity index 100% rename from shell/fusion/SnipsShell.f3d rename to shell/v1.1/fusion/SnipsShell.f3d diff --git a/shell/fusion/lib.py b/shell/v1.1/fusion/lib.py similarity index 99% rename from shell/fusion/lib.py rename to shell/v1.1/fusion/lib.py index 1f4b05c..4c0d8e2 100644 --- a/shell/fusion/lib.py +++ b/shell/v1.1/fusion/lib.py @@ -7,7 +7,7 @@ app = core.Application.get() OX, OY, OZ = 137.5, -104.75, -2.2 -DATA = '/Users/jessica/repos/SnipsControllers/shell/fusion/' +DATA = '/Users/jessica/repos/SnipsControllers/shell/v1.1/fusion/' _sk = None _ft = None diff --git a/shell/fusion/sc_features.json b/shell/v1.1/fusion/sc_features.json similarity index 100% rename from shell/fusion/sc_features.json rename to shell/v1.1/fusion/sc_features.json diff --git a/shell/fusion/sc_sketches.json b/shell/v1.1/fusion/sc_sketches.json similarity index 100% rename from shell/fusion/sc_sketches.json rename to shell/v1.1/fusion/sc_sketches.json diff --git a/shell/photos/snips_shell_01_front_left_top.png b/shell/v1.1/photos/snips_shell_01_front_left_top.png similarity index 100% rename from shell/photos/snips_shell_01_front_left_top.png rename to shell/v1.1/photos/snips_shell_01_front_left_top.png diff --git a/shell/photos/snips_shell_02_rear_right_top.png b/shell/v1.1/photos/snips_shell_02_rear_right_top.png similarity index 100% rename from shell/photos/snips_shell_02_rear_right_top.png rename to shell/v1.1/photos/snips_shell_02_rear_right_top.png diff --git a/shell/photos/snips_shell_03_top.png b/shell/v1.1/photos/snips_shell_03_top.png similarity index 100% rename from shell/photos/snips_shell_03_top.png rename to shell/v1.1/photos/snips_shell_03_top.png diff --git a/shell/photos/snips_shell_04_bottom.png b/shell/v1.1/photos/snips_shell_04_bottom.png similarity index 100% rename from shell/photos/snips_shell_04_bottom.png rename to shell/v1.1/photos/snips_shell_04_bottom.png diff --git a/shell/photos/snips_shell_05_side_left.png b/shell/v1.1/photos/snips_shell_05_side_left.png similarity index 100% rename from shell/photos/snips_shell_05_side_left.png rename to shell/v1.1/photos/snips_shell_05_side_left.png diff --git a/shell/photos/snips_shell_06_side_right.png b/shell/v1.1/photos/snips_shell_06_side_right.png similarity index 100% rename from shell/photos/snips_shell_06_side_right.png rename to shell/v1.1/photos/snips_shell_06_side_right.png diff --git a/shell/photos/snips_shell_07_front_end_bumper_trigger.png b/shell/v1.1/photos/snips_shell_07_front_end_bumper_trigger.png similarity index 100% rename from shell/photos/snips_shell_07_front_end_bumper_trigger.png rename to shell/v1.1/photos/snips_shell_07_front_end_bumper_trigger.png diff --git a/shell/photos/snips_shell_08_underside_trigger_belly.png b/shell/v1.1/photos/snips_shell_08_underside_trigger_belly.png similarity index 100% rename from shell/photos/snips_shell_08_underside_trigger_belly.png rename to shell/v1.1/photos/snips_shell_08_underside_trigger_belly.png diff --git a/shell/photos/snips_shell_09_rear_usb_end.png b/shell/v1.1/photos/snips_shell_09_rear_usb_end.png similarity index 100% rename from shell/photos/snips_shell_09_rear_usb_end.png rename to shell/v1.1/photos/snips_shell_09_rear_usb_end.png diff --git a/shell/photos/snips_shell_10_thumbstick_buttons.png b/shell/v1.1/photos/snips_shell_10_thumbstick_buttons.png similarity index 100% rename from shell/photos/snips_shell_10_thumbstick_buttons.png rename to shell/v1.1/photos/snips_shell_10_thumbstick_buttons.png